Thermodynamic evaluation of a kerosene pre- Fraction unit using energy and exergy analysis

Directory of Open Access Journals (Sweden)

Ehsan Ghasemi

2017-09-01

Full Text Available This work applies the method of energy and exergy analysis over first step of linear alkyl benzene (LAB production namely kerosene pre fraction plant, to determine unit energy and exergy performance and loss, besides of opportunities for improvement based on operational data. For this purpose macroscopic energy and exergy balance was developed over main equipment including electro pumps, heat exchangers, air coolers, and distillation columns. The results shows that total energy performance of plant is 92.62% by 19.76 MW energy lost, while from exergy perspective, unit performance is 78.08% by 17.92 MW exergy lost. Maximum local exergy lost occurs in the feed pre heater exchanger by 27% performance which is designed to recover energy from top product of second column, furthermore results shows that upgrading low quality energy in air coolers based on heat pump concept would protect energy and exergy emission to the environment and reduce 40% of total lost energy and 16% of total lost exergy in plant.

Energy statistics of pre-revolutionary Russia

Directory of Open Access Journals (Sweden)

N. S. Simonov

2017-01-01

Full Text Available The article is devoted to the problem of creation and development of the energy statistics of the Russian Empire of the initial stage of electrification and the formation of the energy economy, which is related to: 1 the economic upsurge of the 1890s; 2 the new economic recovery of 1907–1913 and 3 the militarization of industry in 1914–1916. The real technical and economic indicators and complex statistical data of the pre-revolutionary electric power industry were either hushed up or deliberately distorted during the Soviet era. Even in the encyclopaedic literature it was considered that pre-revolutionaryRussia“was on one of the last places in the world” for the production of electricity. The author analyzes statistical surveys (censuses of the manufacturing industry for 1900 and 1908 (the “varzar censuses”, which gave the first material on the state of its energy sector, namely: the composition, quantity and power of primary engines and electric motors. For the first time in historiography, the data of the “energy censuses” of the Ministry of Finance for 1905 and 1913 on the number and capacity of central public power stations and private power stations (block stations of industrial enterprises, organizations and institutions are cited. The data of the census were conducted with the participation of the apparatus of factory and factory inspections in 1906 and in1916 inall provinces of the Russian Empire, with the exception of six provinces of the frontline zone. A lot of work was done to record electricity production / consumption, which was conducted by the Russian electrotechnical community. According to incomplete data published in 1917 by the Secretariat of the Standing Committee of the VII All-Russia Electrotechnical Congress, from 1905 to 1913 (that is, for 8 years the total number of power stations in the Russian Empire increased by 1.7 times, and the amount of electricity produced by them Has grown in 3,8 times. The

Realizacja założeń edukacji zdrowotnej w norweskim systemie szkolnictwa = Implementation of the objectives of health education in the Norwegian school system

Directory of Open Access Journals (Sweden)

Jolanta Kilanowska

2016-10-01

Åsen skole, Lørenskog Norwegia   Słowa kluczowe: edukacja zdrowotna, Norwegia, szkoła, podstawa programowa, aktywność fizyczna, aktywność na świeżym powietrzu   Streszczenie W pracy podjęto problem i analizę realizacji założeń edukacji zdrowotnej w norweskim systemie szkolnictwa. Porównano także wybrane założenia edukacji zdrowotnej w Norwegii do realizacji edukacji zdrowotnej w Polsce. Publikacja jest częścią przygotowywanej rozprawy naukowej, w której podjęto się empirycznej analizy wyników badań przeprowadzonych w szkołach polskich i norweskich.   Keywords: health education, Norway, school, program, physical activity, outdoor activity   Summary At work it was decided an issue analysis and implementation of health education in the Norwegian school system. Compares the selected assumptions of health education in Norway to implement health education in Poland. The publication is part of a planned dissertation, in which it was decided to the empirical analysis of the results of the tests carried out in schools Polish and Norwegian.

The role of the family assistant in the context of the Ustawa o wspieraniu rodziny i systemie pieczy zastępczej (the statute on family support and surrogate care – another form of work with dysfunctional families [Rola asystenta rodziny w świetle Ustawy o wspieraniu rodziny i systemie pieczy zastępczej – kolejna forma pracy z rodzinami dysfunkcyjnymi

Directory of Open Access Journals (Sweden)

ELŻBIETA ZIEJA

2017-10-01

Full Text Available Ustawa o wspieraniu rodziny i systemie pieczy zastępczej (the statute on family support and surrogate care has obliged municipalities to provide help for dysfunctional families and their children. That is to be brought into effect through the work of the family assistant. The purpose of this help is to make it possible for dysfunctional families to overcome obstacles deriving from the process of the upbringing of young children. The assistant is to help parents fulfill their social functions that might, in effect, lead to the stability of life preventing children from being placed in foster families and institutions. The family assistant is a new position in the structure of the local administration. They work with families after the recognition of social and psychological problems, upbringing difficulties, and conflicts with the law. The work takes place with family’s consent and active participation. The main modus operandi of the assistant includes a selective support of the activities of the person under his/her charge.

Determination of shell correction energies at saddle point using pre-scission neutron multiplicities

International Nuclear Information System (INIS)

Golda, K.S.; Saxena, A.; Mittal, V.K.; Mahata, K.; Sugathan, P.; Jhingan, A.; Singh, V.; Sandal, R.; Goyal, S.; Gehlot, J.; Dhal, A.; Behera, B.R.; Bhowmik, R.K.; Kailas, S.

2013-01-01

Pre-scission neutron multiplicities have been measured for 12 C + 194, 198 Pt systems at matching excitation energies at near Coulomb barrier region. Statistical model analysis with a modified fission barrier and level density prescription have been carried out to fit the measured pre-scission neutron multiplicities and the available evaporation residue and fission cross sections simultaneously to constrain statistical model parameters. Simultaneous fitting of the pre-scission neutron multiplicities and cross section data requires shell correction at the saddle point

PreCam

Energy Technology Data Exchange (ETDEWEB)

Allam, Sahar S. [Fermilab; Tucker, Douglas L. [Fermilab

2015-01-01

The Dark Energy Survey (DES) will be taking the next step in probing the properties of Dark Energy and in understanding the physics of cosmic acceleration. A step towards the photometric calibration of DES is to have a quick, bright survey in the DES footprint (PreCam), using a pre-production set of the Dark Energy Camera (DECam) CCDs and a set of 100 mm×100 mm DES filters. The objective of the PreCam Survey is to create a network of calibrated DES grizY standard stars that will be used for DES nightly calibrations and to improve the DES global relative calibrations. Here, we describe the first year of PreCam observation, results, and photometric calibrations.

Influence of duration of phosphoric acid pre-etching on bond durability of universal adhesives and surface free-energy characteristics of enamel.

Science.gov (United States)

Tsujimoto, Akimasa; Barkmeier, Wayne W; Takamizawa, Toshiki; Watanabe, Hidehiko; Johnson, William W; Latta, Mark A; Miyazaki, Masashi

2016-08-01

The purpose of this study was to evaluate the influence of duration of phosphoric acid pre-etching on the bond durability of universal adhesives and the surface free-energy characteristics of enamel. Three universal adhesives and extracted human molars were used. Two no-pre-etching groups were prepared: ground enamel; and enamel after ultrasonic cleaning with distilled water for 30 s to remove the smear layer. Four pre-etching groups were prepared: enamel pre-etched with phosphoric acid for 3, 5, 10, and 15 s. Shear bond strength (SBS) values of universal adhesive after no thermal cycling and after 30,000 or 60,000 thermal cycles, and surface free-energy values of enamel surfaces, calculated from contact angle measurements, were determined. The specimens that had been pre-etched showed significantly higher SBS and surface free-energy values than the specimens that had not been pre-etched, regardless of the aging condition and adhesive type. The SBS and surface free-energy values did not increase for pre-etching times of longer than 3 s. There were no significant differences in SBS values and surface free-energy characteristics between the specimens with and without a smear layer. The results of this study suggest that phosphoric acid pre-etching of enamel improves the bond durability of universal adhesives and the surface free-energy characteristics of enamel, but these bonding properties do not increase for phosphoric acid pre-etching times of longer than 3 s. © 2016 Eur J Oral Sci.

Instrumentation strategies for energy conservation in broiler barns with ventilation air solar pre-heaters

Energy Technology Data Exchange (ETDEWEB)

Cordeau, Sebastien; Barrington, Suzelle [Department of Bioresource Engineering, Macdonald Campus of McGill University, 21 111 Lakeshore, Ste Anne de Bellevue, Quebec H9X 3V9 (Canada)

2010-08-15

At the present consumption rate, world fossil-fuel reserves are expected to be depleted by 2050 unless their consumption is optimized and supplemented with renewable energy sources. The objective of this project was to evaluate the performance of a simple data acquisition system installed to conduct an energy balance and identify energy saving strategies in two commercial broilers barns with ventilation air solar pre-heaters. Located near Montreal, Canada, the two identical barns were instrumented for inside and outside air conditions, ventilation rate and energy recovery by the solar air pre-heaters. Whereas the temperature, relative humidity and radiation sensors were reliable, inside air temperature stratification complicated energy balance analyses and broiler heat production rate calculations. Lack of room air mixing resulted in the loss of 25 and 15% of the generated heater load and recovered solar energy. The proper monitoring of all environmental conditions required their measurement every 5 rather than 20 min. Instead of using a data transmission service found to be unreliable in rural areas, all data loggers were downloaded onto a portable computer every 45 days during regular instrument maintenance. Accordingly, room air mixing is recommended to facilitate energy balance studies and improve the efficient use of heating energies. (author)

Mechanical pre-treatment for enzymatically enhanced energy efficient TMP; Mekanisk foerbehandling av flis foer effektiv enzymatisk paaverkan vid energieffektiv TMP tillverkning

Energy Technology Data Exchange (ETDEWEB)

Viforr, Silvia

2008-11-15

Thermomechanical pulp (TMP) processes are high energy demanding. This together with the high energy prices of nowadays results in significant costs, why less energy demanding processes are wished. This project has evaluated the potential for energy reductions in a TMP process by a mechanical pre-treatment of the wood chips combined with an enzymatic modification based on a cellulase mixture. The structure of the wood was opened up by the mechanical pre-treatment making it easier for the enzymes to penetrate into the pre-treated wood material. The enzymatic treatment was then run at optimum standard conditions. The EU project - Ecotarget 2004-2008 (www.ecotarget.com) have studied different types of enzymes that could be used for pre-treatment of wood chips in order to save energy during TMP processes. Based on these studies cellulose enzyme was recommended to be used at pre-treatment experiment performed by the Vaermeforsk project. Due to the fact that the Ecotarget-project has also been run during 2008 with activities involving enzymes, the steering board of the Vaermeforsk project took the decision to co-ordinate the experiments from both of the projects. This co-operation increased the funds and also the number of experiments for both of the projects. The experimental results from this project showed that energy reductions at a given tensile index could be achieved if gently mechanical pre-treated wood chips were enzymatically treated. An intensive mechanical pre-treatment gave negative effects on both fibre length and tear index while the light scattering coefficient was promoted, probably due to the fibre shortening. Enzymatic modification of mechanically pre-treated chips showed a favourable modification of the fibres, even regarding the fibre shortening, if compared to mechanical pre-treated chips only. The effects of cellulases was however not as expected, why a high amount of cellulases was used. Other types of enzymes which could attack the primary wall of

Survey of Recipients of WAP Services Assessment of Household Budget and Energy Behaviors Pre to Post Weatherization DOE

Energy Technology Data Exchange (ETDEWEB)

Tonn, Bruce Edward [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Rose, Erin M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Hawkins, Beth A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2015-10-01

This report presents results from the national survey of weatherization recipients. This research was one component of the retrospective and Recovery Act evaluations of the U.S. Department of Energy s Weatherization Assistance Program. Survey respondents were randomly selected from a nationally representative sample of weatherization recipients. The respondents and a comparison group were surveyed just prior to receiving their energy audits and then again approximately 18 months post-weatherization. This report focuses on budget issues faced by WAP households pre- and post-weatherization, whether household energy behaviors changed from pre- to post, the effectiveness of approaches to client energy education, and use and knowledge about thermostats.

A Motor/Generator for Flywheel Energy Storage System Levitated by Bulk Superconductor

Energy Technology Data Exchange (ETDEWEB)

Koh, C.S.; Yeon, J.U.; Jeoung, H.M.; Choi, J.H. [Chungbuk National University (Korea); Lee, H.J; Hong, G.W. [Korea Atomic Energy Research Institute (Korea)

2000-06-01

The energy storage systems are being widely researched for the high quality of the electric power. The FES(flywheel energy storage system)is especially, on the center of the research because it does not make any pollution and its life is long. The FES converts the electrical energy into the mechanical kinetic energy of the flywheel and reconverts the mechanical energy into the electrical energy, In order to store as much energy as possible, the flywheel is supposed to be rotated with very high speed. The motor/generator of the FES should be high efficient at high speed, and generate constant torque with respect to the rotation. In this paper, a motor/generator employing a Halbach array of permanent magnets is designed and constructed to meet the requirements, and its characteristics are examined. The magnetic field is analysed by using the magnetic surface charge method. The armature winding is designed for the harmonic components to be minimized by using the FFT. The sinusoidal currents for the motor driving are generated by the hysteresis current controller. A sample superconducting flywheel energy storage system is constructed with a duralumin flywheel which has a maximum rotating speed of 40,000[rpm] and a stored energy of 240[Wh] and its validity is examined through the experiment. (author). 15 refs., 17 figs., 2 tabs.

Energy-positive sewage sludge pre-treatment with a novel ultrasonic flatbed reactor at low energy input.

Science.gov (United States)

Lippert, Thomas; Bandelin, Jochen; Musch, Alexandra; Drewes, Jörg E; Koch, Konrad

2018-05-20

The performance of a novel ultrasonic flatbed reactor for sewage sludge pre-treatment was assessed for three different waste activated sludges. The study systematically investigated the impact of specific energy input (200 - 3,000 kJ/kg TS ) on the degree of disintegration (DD COD , i.e. ratio between ultrasonically and maximum chemically solubilized COD) and methane production enhancement. Relationship between DD COD and energy input was linear, for all sludges tested. Methane yields were significantly increased for both low (200 kJ/kg TS ) and high (2,000 - 3,000 kJ/kg TS ) energy inputs, while intermediate inputs (400 - 1,000 kJ/kg TS ) showed no significant improvement. High inputs additionally accelerated reaction kinetics, but were limited to similar gains as low inputs (max. 12%), despite the considerably higher DD COD values. Energy balance was only positive for 200 kJ/kg TS -treatments, with a maximum energy recovery of 122%. Results suggest that floc deagglomeration rather than cell lysis (DD COD =1% - 5% at 200 kJ/kg TS ) is the key principle of energy-positive sludge sonication. Copyright © 2018 Elsevier Ltd. All rights reserved.

The virtual library in action: Collaborative international control of high-energy physics pre-print

International Nuclear Information System (INIS)

Kreitz, P.A.; Addis, L.; Galic, H.; Johnson, T.

1996-02-01

This paper will discuss how control of the grey literature in high-energy physics pre-prints developed through a collaborative effort of librarians and physicists. It will highlight the critical steps in the development process and describe one model of a rapidly evolving virtual library for high-energy physics information. In conclusion, this paper will extend this physics model to other areas of grey literature management

PRE-DIABETES

OpenAIRE

Akula Annapurna

2013-01-01

Pre-diabetes is a condition where the body's cells begin to show resistance to insulin. Glucose circulates in the blood instead of being used by the cells for energy. Blood sugar levels become elevated. Increased weight, unhealthy diet and a sedentary lifestyle can lead to pre-diabetes. WHAT IS PRE-DIABETES A diagnosis of pre-diabetes means that the cells in your body are becoming resistant to insulin and your blood glucose levels are higher than they should be. Since the levels aren't as hig...

LABORATORYJNA INSTALACJA FOTOWOLTAICZNA Z MAGAZYNEM ENERGII

Directory of Open Access Journals (Sweden)

Adam MROZIŃSKI

Full Text Available W artykule przedstawiono zagadnienie wykorzystania w Polsce i w Europie instalacji fotowoltaicznych (PV z magazynami energii elektrycznej. Systemy PV będą miały w niedalekiej przyszłości znaczny udział w globalnej produkcji energii elektrycznej. Będzie to istotnie wpływało na ograniczenie emisji gazów cieplarnianych oraz na poprawę stanu środowiska naturalnego. W pracy przedstawiono budowę laboratoryjnej instalacji PV zlokalizowanej na WIM UTP w Bydgoszczy. Przedstawiono również wybrane wyniki pomiarów rozkładu produkcji i dystrybucji energii elektrycznej w czasie (produkcja przez układ PV, zużycie własne, magazynowanie w akum, przesył do sieci zewn. z wykorzystaniem systemu monitoringu. W instalacjach PV coraz większe znaczenie mają systemy zarządzania energią oraz układy magazynujące energię elektryczną. Dzięki tym systemom energia elektryczna produkowana w ciągu dnia będzie zużywana na bieżąco. Nadmiar energii trafi do przydomowego akumulatora. Zgromadzona energia efektywnie zostanie wykorzystana wieczorem, kiedy zapotrzebowanie na prąd jest najwyższe. Ewentualne niedobory pokryje energia z sieci - kupiona nocą lub wczesnym rankiem, kiedy cena energii jest najniższa. Inteligentne sieci przesyłowe współpracujące z przydomowymi instalacjami PV z magazynami energii umożliwią skuteczniejsze zarządzanie popytem i podażą energii w całym systemie energetycznym.

Pre-Service Science Teachers' Views about Nuclear Energy with Respect to Gender and University Providing Instruction

Science.gov (United States)

Ates, H.; Saracoglu, M.

2016-01-01

The purpose of this research was to investigate pre-service science teachers' (PST) views about nuclear energy and to examine what effects, if any, of gender and the university of instruction had on their views. Data were collected through the Risks and Benefits about Nuclear Energy Scale (Iseri, 2012). The sample consisted of 214 PSTs who…

Developing A Renewable Energy Awareness Scale For Pre-service Chemistry Teachers

Directory of Open Access Journals (Sweden)

Soner YAVUZ

2006-01-01

Full Text Available Developing A Renewable Energy Awareness Scale For Pre-service Chemistry Teachers Inci MORGIL Nilgün SECKEN A. Seda YUCEL Ozge OZYALCIN OSKAY Soner YAVUZ and Evrim URAL Hacettepe University, Faculty of Education, Department of Chemistry Education, 06800 Beytepe, Ankara, TURKEY ABSTRACT In times when human beings used to live in a natural environment, their needs were also provided by natural resources. With the increases in population in time, human beings started to look for new resources willing to get “the more” and “the fastest”. Just like the invention of steam, firstly, they increased the density of the resources and produced “more” energy. However, instead of working on the density of water, which spreads with the solar energy, they chose an easier way, which was fuel that produced more energy when burnt. Unfortunately, the damages these fuel products create in the atmosphere and environment shaded their benefits. It did not take so long for the earth to run out of energy resources and to threaten environmental and human health. As a result of that, new energy resources were started to be sought and the studies enlightened the concepts of sustainable, renewable energy. Renewable energy is defined as “the energy source, which continues its existence for the following days within the evolution of nature”. Educators pointed out a need in students for gaining consciousness on renewable energy resources. In the light of the importance of renewable and sustainable energy, a “Renewable Energy Awareness Scale” that questioned to what extent the individuals were aware of renewable energy was developed. The Renewable Energy Awareness Scale, which consisted of 50 items, was administered as a pilot study. The factor analysis concluded with a scale of 39 items with a reliability coefficient of 0.944 was developed.

Origin of life: hypothesized roles of high-energy electrical discharges, infrared radiation, thermosynthesis and pre-photosynthesis.

Science.gov (United States)

Trevors, J T

2012-12-01

The hypothesis is proposed that during the organization of pre-biotic bacterial cell(s), high-energy electrical discharges, infrared radiation (IR), thermosynthesis and possibly pre-photosynthesis were central to the origin of life. High-energy electrical discharges generated some simple organic molecules available for the origin of life. Infrared radiation, both incoming to the Earth and generated on the cooling Earth with day/night and warming/cooling cycles, was a component of heat engine thermosynthesis before enzymes and the genetic code were present. Eventually, a primitive forerunner of photosynthesis and the capability to capture visible light emerged. In addition, the dual particle-wave nature of light is discussed from the perspective that life requires light acting both as a wave and particle.

Effect of ultrasonic pre-treatment on biogas yield and specific energy in anaerobic digestion of fruit and vegetable wholesale market wastes

Directory of Open Access Journals (Sweden)

Reyhaneh Zeynali

2017-11-01

Full Text Available Ultrasonic pre-treatment has been considered as an environmentally friendly process for enhancing the biodegradability of organic matter in anaerobic digestion. However the consumed energy during the pre-treatment is a matter of challenge especially where energy generation is the main purpose of a biogas plant. The aim of the present work was to study the efficiency of ultrasonic pre-treatment in enhancement of biogas production from fruits and vegetable wholesale market waste. Three sonication times (9, 18, 27 min operating at 20 kHz and amplitude of 80 μm were used on the substrate. The highest methane yield was obtained at 18 min sonication (2380 kJ kg−1 total solids while longer exposure to sonication led to lower methane yield. This amount of biogas was obtained in 12 d of batch time. The energy content of the biogas obtained from this reactor was two times of the input energy for sonication.

Pre-patterned ZnO nanoribbons on soft substrates for stretchable energy harvesting applications

Science.gov (United States)

Ma, Teng; Wang, Yong; Tang, Rui; Yu, Hongyu; Jiang, Hanqing

2013-05-01

Three pre-patterned ZnO nanoribbons in different configurations were studied in this paper, including (a) straight ZnO nanoribbons uniformly bonded on soft substrates that form sinusoidal buckles, (b) straight ZnO nanoribbons selectively bonded on soft substrates that form pop-up buckles, and (c) serpentine ZnO nanoribbons bonded on soft substrates via anchors. The nonlinear dynamics and random analysis were conducted to obtain the fundamental frequencies and to evaluate their performance in energy harvesting applications. We found that pop-up buckles and overhanging serpentine structures are suitable for audio frequency energy harvesting applications. Remarkably, almost unchanged fundamental natural frequency upon strain is achieved by properly patterning ZnO nanoribbons, which initiates a new and exciting direction of stretchable energy harvesting using nano-scale materials in audio frequency range.

Assessment of bone mineral density with dual energy X-ray absorptiometry in pre-and post-menopausal women

International Nuclear Information System (INIS)

Salamat, M. R.; Rostampour, N.; Shanehsazzadeh, S.; Tavakoli, M. B.; Siavash, M.; Almasi, T.

2008-01-01

Osteoporosis is a chronic disease that contributes substantially to decrease physical activity and decline in the quality of life. Osteoporosis can be diagnosed easily with the use of dual-energy X-ray absorptiometry equipment. The aim of this study was to investigate the magnitude of bone loss on proximal femur and lumbar spine in pre-and post-menopausal women from Isfahan Osteoporosis Diagnosis Center since 2005. Materials and Methods: Bone mineral density measurements using dual-energy X-ray absorptiometry have been performed at Isfahan Osteoporosis Diagnosis Center. 185 pre-menopausal and 174 early post-menopausal women were selected randomly. A Norland XR46 system was used for the investigations. The student t-lest was done to find the difference between the T-scores of the femoral neck and lumbar spine in pre-and post-menopausal women. Results: Mean Bone mineral density for the femoral neck and lumbar spine in pre-menopausal women were 0.859 ± 0.136 and 1.012 ± 0.161 and in post-menopausal women were 0.816 ± 0.119 and 0.919 ± 0.140, respectively. Long-term Bone mineral density CVs of 1.0% and 1.2% for the lumbar spine and femoral neck were found, respectively. The differences between the femoral neck and lumbar spine for pre-and post-menopausal women were t = -9.02, P < 0.05 and t = -3.50, P < 0.05, respectively. Conclusion: In spite of, the reported lower Bone mineral density T-scores for the lumbar spine compared With the femoral neck for women, we found that the femoral neck had significantly lower T-score than lumbar spine for both pre-and post-menopausal women.

Examination of a pre-exercise, high energy supplement on exercise performance

Directory of Open Access Journals (Sweden)

Tranchina Christopher P

2009-01-01

Full Text Available Abstract Background The purpose of this study was to examine the effect of a pre-exercise high energy drink on reaction time and anaerobic power in competitive strength/power athletes. In addition, the effect of the pre-exercise drink on subjective feelings of energy, fatigue, alertness and focus was also explored. Methods Twelve male strength/power athletes (21.1 ± 1.3 y; 179.8 ± 7.1 cm; 88.6 ± 12.1 kg; 17.6 ± 3.3% body fat underwent two testing sessions administered in a randomized and double-blind fashion. During each session, subjects reported to the Human Performance Laboratory and were provided with either 120 ml of a high energy drink (SUP, commercially marketed as Redline Extreme® or 120 ml of a placebo (PL that was similar in taste and appearance but contained no active ingredients. Following consumption of the supplement or placebo subjects rested quietly for 10-minutes prior to completing a survey and commencing exercise. The survey consisted of 4 questions asking each subject to describe their feelings of energy, fatigue, alertness and focus for that moment. Following the completion of the questionnaire subjects performed a 2-minute quickness and reaction test on the Makoto testing device (Makoto USA, Centennial CO and a 20-second Wingate Anaerobic Power test. Following a 10-minute rest subjects repeated the testing sequence and after a similar rest period a third and final testing sequence was performed. The Makoto testing device consisted of subjects reacting to both a visual and auditory stimulus and striking one out of 30 potential targets on three towers. Results Significant difference in reaction performance was seen between SUP and PL in both average number of targets struck (55.8 ± 7.4 versus 51.9 ± 7.4, respectively and percent of targets struck (71.9 ± 10.5% versus 66.8 ± 10.9%, respectively. No significant differences between trials were seen in any anaerobic power measure. Subjective feelings of energy (3.5 ± 0

Dual thinking for scientists

Directory of Open Access Journals (Sweden)

Marten Scheffer

2015-06-01

Full Text Available Recent studies provide compelling evidence for the idea that creative thinking draws upon two kinds of processes linked to distinct physiological features, and stimulated under different conditions. In short, the fast system-I produces intuition whereas the slow and deliberate system-II produces reasoning. System-I can help see novel solutions and associations instantaneously, but is prone to error. System-II has other biases, but can help checking and modifying the system-I results. Although thinking is the core business of science, the accepted ways of doing our work focus almost entirely on facilitating system-II. We discuss the role of system-I thinking in past scientific breakthroughs, and argue that scientific progress may be catalyzed by creating conditions for such associative intuitive thinking in our academic lives and in education. Unstructured socializing time, education for daring exploration, and cooperation with the arts are among the potential elements. Because such activities may be looked upon as procrastination rather than work, deliberate effort is needed to counteract our systematic bias.

Building a Pre-Competitive Knowledge Base to Support Australia's Wave Energy Industry

Science.gov (United States)

Hoeke, R. K.; Hemer, M. A.; Symonds, G.; Rosebrock, U.; Kenyon, R.; Zieger, S.; Durrant, T.; Contardo, S.; O'Grady, J.; Mcinnes, K. L.

2016-02-01

A pre-competitive, query-able and openly available spatio-temporal atlas of Australia's wind-wave energy resource and marine management uses is being delivered. To provide the best representation of wave energy resource information, accounting for both spatial and temporal characteristics of the resource, a 34+yr numerical hindcast of wave conditions in the Australian region has been developed. Considerable in situ and remotely sensed data have been collected to support calibration and validation of the hindcast, resulting in a high-quality characterisation of the available wave resource in the Australian domain. Planning for wave energy projects is also subject to other spatial constraints. Spatial information on alternative uses of the marine domain including, for example, fisheries and aquaculture, oil and gas, shipping, navigation and ports, marine parks and reserves, sub-sea cables and infrastructure, shipwrecks and sites of cultural significance, have been compiled to complement the spatial characterisation of resource and support spatial planning of future wave energy projects. Both resource and spatial constraint information are being disseminated via a state-of-the-art portal, designed to meet the needs of all industry stakeholders. Another aspect currently impeding the industry in Australia is the limited evidence-base of impacts of wave energy extraction on adjacent marine and coastal environments. To build this evidence base, a network of in situ wave measurement devices have been deployed surrounding the 3 wave energy converters of Carnegie Wave Energy Limited's Perth Wave Energy Project. This data is being used to calibrate and validate numerical simulations of the project site. Early stage results will be presented.

Pre-equilibrium emission of nucleons from reactions induced by medium-energy heavy ions

International Nuclear Information System (INIS)

Korolija, M.; Holuh, E.; Cindro, N.; Hilscher, D.

1984-01-01

Recent data on fast-nucleon emission in heavy-ion-induced reactions are analysed successfully in terms of pre-equilibrium models; it is shown that the relevant parameters of those models preserve the physical meaning they have in light-ion-induced reactions. The initial exciton number obtained from a Griffin-plot analysis and the initial number of degrees of freedom, which is the relevant parameter of the modified HMB model, appear to be approximately equal for a given reaction at a given energy. It is inferred that, for heavy-ion reactions, the determination of such a parameter is substantially dominated by the centre-of-mass energy per nucleon above the Coulomb barrier, in contrast with the results of nucleon-induced reactions

Preliminary study on the differentiation between parapelvic cyst and hydronephrosis with non-calculous using only pre-contrast dual-energy spectral CT scans

Science.gov (United States)

Han, Dong; Ma, Guangming; Wei, Lequn; Ren, Chenglong; Zhou, Jieli; Shen, Chen

2017-01-01

Objective: To investigate the value of using the quantitative parameters from only the pre-contrast dual-energy spectral CT imaging for distinguishing between parapelvic cyst and hydronephrosis with non-calculous (HNC). Methods: This retrospective study was approved by the institutional review board. 28 patients with parapelvic cyst and 24 patients with HNC who underwent standard pre-contrast and multiphase contrast-enhanced dual-energy spectral CT imaging were retrospectively identified. The parapelvic cyst and HNC were identified using the contrast-enhanced scans, and their CT number in the 70-keV monochromatic images, effective atomic number (Zeff), iodine concentration (IC) and water concentration in the pre-contrast images were measured. The slope of the spectral curve (λ) was calculated. The difference in the measurements between parapelvic cyst and HNC was statistically analyzed using SPSS® v. 19.0 (IBM Corp., New York, NY; formerly SPSS Inc., Chicago, IL) statistical software. Receiver-operating characteristic analysis was performed to assess the diagnostic performance. Results: The CT numbers in the 70-keV images, Zeff and IC values were statistically different between parapelvic cyst and HNC (all p  0.05). Conclusion: The quantitative parameters obtained in the pre-contrast dual-energy spectral CT imaging may be used to differentiate between parapelvic cyst and HNC. Advances in knowledge: The pre-contrast dual-energy spectral CT scans may be used to screen parapelvic cysts for patients who are asymptomatic, thereby avoiding contrast-enhanced CT or CT urography examination for these patients to reduce ionizing radiation dose and contrast dose. PMID:28281789

Use of the Drawing-Writing Technique to Determine the Level of Knowledge of Pre-Service Teachers Regarding Renewable Energy Sources

Science.gov (United States)

Kara, Filiz

2015-01-01

The aim of this study was to determine the level of knowledge of pre-service science teachers in Turkey regarding the different types of renewable energy sources, the methods used for obtaining energy from these sources, and the areas of use for these energy sources. Within the context of the study, the drawing-writing technique was used in order…

Study of threshold energy registration of alpha particles on lexan nuclear track detector (passive) by Kr F laser pre-radiation

International Nuclear Information System (INIS)

Parvin, P.; Jaleh, B.; Hashemi, M. M.; Katoozi, M.; Amiri Rad, N.; Zamanipour, Z.; Zarea, A.

2002-01-01

The effect of Kr F laser pre-radiation has been investigated on both alpha track density and threshold energy of track registration. While no significant difference was observed on track density an nevertheless ∼100 keV shift of threshold energy occurred due to UV superficial hardening of Lexan detector

Energy and electricity use in buildings. Pre-study; Energi- och Elanvaendning i byggnader. Foerstudie

Energy Technology Data Exchange (ETDEWEB)

Dalenbaeck, Jan-Olof; Goeransson, Anders; Jagemar, Lennart [Chalmers EnergiCentrum CEC, Goeteborg (Sweden)

2006-05-15

The built environment accounts for 40 % of energy use and 50 % of electricity use in Sweden. Sweden uses more than twice as much electrical energy as the mean value for EU-15 and the principal reason for this is good access to relatively inexpensive electricity. This pre-study summarises the current use of electricity, the prerequisites and potential for reducing the use of electricity and current RDandD projects focusing on the use of energy. It also gives a brief description of a couple of visions for the future. The proposed research projects focus on describing the use of electricity (energy, output, voltage etc) and analysing the way different control mechanisms influence the opportunity to realise sustainable developments. The heated areas in houses and buildings are distributed as follows: 45 % in detached or semi-detached houses, 30 % in blocks of flats (including some business premises) and 25 % in business premises. About 80 % of these areas were erected before 1980. A large percentage of the energy that is supplied to these houses and buildings, around 65 %, is used for various heating purposes, first and foremost in older detached or semi-detached houses and blocks of flats. The heating for detached or semi-detached houses is supplied in many different ways, while district heating is primarily responsible for the heating that is supplied to blocks of flats and business premises. A large percentage of the electricity usage is accounted for by heating, primarily in new detached or semi-detached houses, and electricity for operations in business premises - around 35% and 28% respectively. In addition to heating, electricity is used first and foremost for lighting and different types of electrical equipment, but most of the existing statistics relating to the distribution of electricity usage between different applications are based on old surveys and studies and need to be updated. It is estimated that the techno-economic potential for saving energy in

Survey report of FY 1997 on the long-term energy technology strategy. Survey on the pre-assessment system of energy and environmental technology research and development; 1997 nendo chosa hokokusho (choki energy gijutsu senryaku chosa). Energy kankyo gijutsu kenkyu kaihatsu no jizen hyoka ni kansuru chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

To select projects of the New Sunshine Program which is the locomotive for Japan`s research and development of energy and environmental technologies and to map out the Program`s long-term strategy, it is required to develop an effective methodology of assessing research and development themes. It is also necessary to establish the pre-assessment system which makes the assessment process more logical and which will enable the priority setting among different themes on the basis of objective and quantitative analysis. Additionally, transparency should be ensured for such a pre-assessment process through disclosure to the public and other means. The present survey aims to concretize the pre-assessment system by studying the system and techniques of an assessment system which is applicable to the research and development themes of the New Sunshine Program and is objective, quantitative and logical and which can ensure transparency and by receiving suggestions on the pre-assessment of Japan`s research and development of energies and environmental technologies through research on overseas trends of government-led research and development. 3 refs., 7 figs., 26 tabs.

Electrostatic Vibration Energy Harvester Pre-charged Wirelessly at 2.45 GHz

Science.gov (United States)

Saddi, Z.; Takhedmit, H.; Karami, A.; Basset, P.; Cirio, L.

2016-11-01

This paper reports the design, fabrication and experiments of an electrostatic vibration harvester (e-VEH), pre-charged wirelessly for the first time by using an electromagnetic waves harvester at 2.4 GHz. The rectenna uses the Cockcroft-Walton voltage doubler rectifier. It is designed and optimized to operate at low power densities and provides high voltage levels: 0.5 V at 0.5 μW/cm2 and 0.8 V at 1 μW/cm2 The e-VEH uses the Bennet doubler as conditioning circuit. Experiments show 23 V voltage across the transducer terminal when the harvester is excited at 25 Hz by 1.5 g of external acceleration. An accumulated energy of 275 μJ and a maximum power of 0.4 μW are available for the load.

Electrostatic Vibration Energy Harvester Pre-charged Wirelessly at 2.45 GHz

International Nuclear Information System (INIS)

Saddi, Z.; Takhedmit, H.; Basset, P.; Cirio, L.; Karami, A.

2016-01-01

This paper reports the design, fabrication and experiments of an electrostatic vibration harvester (e-VEH), pre-charged wirelessly for the first time by using an electromagnetic waves harvester at 2.4 GHz. The rectenna uses the Cockcroft-Walton voltage doubler rectifier. It is designed and optimized to operate at low power densities and provides high voltage levels: 0.5 V at 0.5 μW/cm 2 and 0.8 V at 1 μW/cm 2 The e-VEH uses the Bennet doubler as conditioning circuit. Experiments show 23 V voltage across the transducer terminal when the harvester is excited at 25 Hz by 1.5 g of external acceleration. An accumulated energy of 275 μJ and a maximum power of 0.4 μW are available for the load. (paper)

Precise atomic-scale investigations of material sputtering process by light gas ions in pre-threshold energy region

CERN Document Server

Suvorov, A L

2002-01-01

Foundation and prospects of the new original technique of the sputtering yield determination of electro-conducting materials and sub-atomic layers on their surface by light gas ions the pre-threshold energy region (from 10 to 500 eV) are considered. The technique allows to identify individual surface vacancies, i.e., to count individual sputtered atoms directly. A short review of the original results obtained by using the developed techniques is given. Data are presented and analyzed concerning energy thresholds of the sputtering onset and energy dependences of sputtering yield in the threshold energy region for beryllium, tungsten, tungsten oxide, alternating tungsten-carbon layers, three carbon materials as well as for sub-atomic carbon layers on surface of certain metals at their bombardment by hydrogen, deuterium and/or helium ions

Marketingová strategie společnosti Alarmové systémy CZ

OpenAIRE

Fialová, Petra

2013-01-01

This bachelor thesis deals with the marketing strategy and marketing communications of the company Alarmové systemy CZ and analyses all marketing activities that this company made during its first year of operation in the market. The aim of this thesis is to evaluate the marketing strategy and marketing communications of the company Alarmove systemy CZ and to suggest measures for its improvement. Through analyzing of its marketing communications were discovered the tools that the company uses...

Thermal Properties and Energy Fluxes in Pre-monsoon Season of 2016 at the Ponkar Debris-Covered Glacier, Manang, Nepal Himalaya

Science.gov (United States)

Chand, M. B.; Kayastha, R. B.; Armstrong, R. L.

2016-12-01

Himalayan glaciers are characterized by the presence of extensive debris cover in ablation areas. It is essential to understand the thermal properties and assess the effect of debris in glacier ice melt rate in debris-covered glaciers. Meteorological conditions are recorded on the lower ablation zone of the debris-covered Ponkar Glacier, Bhimthang, Manang, Nepal during pre-monsoon season of 2016. Debris temperature at different depths is monitored for winter and pre-monsoon season to estimate the effective heat conduction. Similarly, melt under the debris is also measured for pre-monsoon season. The incoming and outgoing shortwave radiations are measured at 2 m above the surface and other variables including air temperature, humidity, wind speed, and precipitation are used to estimate surface energy balance. Energy flux is dominated by net shortwave radiation as the foremost source of melting, where contribution of net longwave radiation, sensible, latent, and conductive heat flux is low. The daily average temperature gradients of the debris layer from surface to 30 cm below for winter and pre-monsoon seasons are 0.04 oC cm-1 and 0.23 oC cm-1, respectively. Debris thermal conductivities are 0.30 W m-1 K-1 and 1.69 W m-1 K-1 for the winter and pre-monsoon season, respectively. The higher value of conductivity during pre-monsoon season is due to the higher air temperature and increased precipitation compared to the winter months. The daily mean measured ice melt under a debris layer of 11-20 cm ranges from 0.6 to 1.1 cm. Estimation of melt at a few points can be used to estimate the general melting pattern for the glacier surface, which can be improved by using the spatial distribution of debris thickness and surface temperature.

Validation of the Danish 7-day pre-coded food diary among adults: energy intake v. energy expenditure and recording length

DEFF Research Database (Denmark)

Biltoft-Jensen, Anja Pia; Matthiessen, Jeppe; Rasmussen, Lone Banke

2009-01-01

Under-reporting of energy intake (EI) is a well-known problem when measuring dietary intake in free-living populations. The present study aimed at quantifying misreporting by comparing EI estimated from the Danish pre-coded food diary against energy expenditure (EE) measured with a validated...... position-and-motion instrument (ActiReg®). Further, the influence of recording length on EI:BMR, percentage consumers, the number of meal occasions and recorded food items per meal was examined. A total of 138 Danish volunteers aged 20–59 years wore the ActiReg® and recorded their food intake for 7...... for EI and EE were − 6·29 and 3·09 MJ/d. Of the participants, 73 % were classified as acceptable reporters, 26 % as under-reporters and 1 % as over-reporters. EI:BMR was significantly lower on 1–3 consecutive recording days compared with 4–7 recording days (P food...

Structure prediction of nanoclusters; a direct or a pre-screened search on the DFT energy landscape?

Science.gov (United States)

Farrow, M R; Chow, Y; Woodley, S M

2014-10-21

The atomic structure of inorganic nanoclusters obtained via a search for low lying minima on energy landscapes, or hypersurfaces, is reported for inorganic binary compounds: zinc oxide (ZnO)n, magnesium oxide (MgO)n, cadmium selenide (CdSe)n, and potassium fluoride (KF)n, where n = 1-12 formula units. The computational cost of each search is dominated by the effort to evaluate each sample point on the energy landscape and the number of required sample points. The effect of changing the balance between these two factors on the success of the search is investigated. The choice of sample points will also affect the number of required data points and therefore the efficiency of the search. Monte Carlo based global optimisation routines (evolutionary and stochastic quenching algorithms) within a new software package, viz. Knowledge Led Master Code (KLMC), are employed to search both directly and after pre-screening on the DFT energy landscape. Pre-screening includes structural relaxation to minimise a cheaper energy function - based on interatomic potentials - and is found to improve significantly the search efficiency, and typically reduces the number of DFT calculations required to locate the local minima by more than an order of magnitude. Although the choice of functional form is important, the approach is robust to small changes to the interatomic potential parameters. The computational cost of initial DFT calculations of each structure is reduced by employing Gaussian smearing to the electronic energy levels. Larger (KF)n nanoclusters are predicted to form cuboid cuts from the rock-salt phase, but also share many structural motifs with (MgO)n for smaller clusters. The transition from 2D rings to 3D (bubble, or fullerene-like) structures occur at a larger cluster size for (ZnO)n and (CdSe)n. Differences between the HOMO and LUMO energies, for all the compounds apart from KF, are in the visible region of the optical spectrum (2-3 eV); KF lies deep in the UV region

Technology insight: metabonomics in gastroenterology-basic principles and potential clinical applications

DEFF Research Database (Denmark)

Bjerrum, Jacob Tveiten; Nielsen, Ole H; Wang, Yulan L

2008-01-01

Metabonomics-the study of metabolic changes in an integrated biologic system-is an emerging field. This discipline joins the other 'omics' (genomics, transcriptomics and proteomics) to give rise to a comprehensive, systems-biology approach to the evaluation of holistic in vivo function. Metabonom......Metabonomics-the study of metabolic changes in an integrated biologic system-is an emerging field. This discipline joins the other 'omics' (genomics, transcriptomics and proteomics) to give rise to a comprehensive, systems-biology approach to the evaluation of holistic in vivo function...

Final report of the pre - investigation phase. Project on the establishment and renovation of renewable energy production facilities in Northern Poland

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-07-01

The project for the erection of a windmill park and the renovation/modernisation of the hydro power plants reached with the finishing of the pre-investigation a milestone. The results of the investigations show that the project is fully corresponding with both EU and polish politic aims of increased utilisation of renewable energy sources for electricity production. Further the pre-investigation notified, that in Poland there exists a lack of experience of the utilisation of wind for electricity production, as there exists only 12 windmill/windmill parks, so that the project is evaluated to have a high demonstration effect on the production of renewable energy based on wind. During the pre-investigation there were elaborated among others feasibility studies on the erection of the windmill park and the renovation of the hydro power plants. The economic feasibility calculations on both parts of the project, found that erection of the windmill park and the renovation of the hydro power plants are fully feasible under the existing conditions. It is foreseen that KEW, the local electricity production company as investor will obtain a loan under the Danish environmental soft loan program for Eastern Europe for the equipment and installation of the equipment. Associated specialist work is applied for support by the Danish Environmental Agency and the Danish Energy Agency. That these institutions and the Danish State Export Credit Agency (EKF) approve their principal willingness to support this project is the next necessary step for the projects implementation. (au)

The Effect of Phosphoric Acid Pre-etching Times on Bonding Performance and Surface Free Energy with Single-step Self-etch Adhesives.

Science.gov (United States)

Tsujimoto, A; Barkmeier, W W; Takamizawa, T; Latta, M A; Miyazaki, M

2016-01-01

The purpose of this study was to evaluate the effect of phosphoric acid pre-etching times on shear bond strength (SBS) and surface free energy (SFE) with single-step self-etch adhesives. The three single-step self-etch adhesives used were: 1) Scotchbond Universal Adhesive (3M ESPE), 2) Clearfil tri-S Bond (Kuraray Noritake Dental), and 3) G-Bond Plus (GC). Two no pre-etching groups, 1) untreated enamel and 2) enamel surfaces after ultrasonic cleaning with distilled water for 30 seconds to remove the smear layer, were prepared. There were four pre-etching groups: 1) enamel surfaces were pre-etched with phosphoric acid (Etchant, 3M ESPE) for 3 seconds, 2) enamel surfaces were pre-etched for 5 seconds, 3) enamel surfaces were pre-etched for 10 seconds, and 4) enamel surfaces were pre-etched for 15 seconds. Resin composite was bonded to the treated enamel surface to determine SBS. The SFEs of treated enamel surfaces were determined by measuring the contact angles of three test liquids. Scanning electron microscopy was used to examine the enamel surfaces and enamel-adhesive interface. The specimens with phosphoric acid pre-etching showed significantly higher SBS and SFEs than the specimens without phosphoric acid pre-etching regardless of the adhesive system used. SBS and SFEs did not increase for phosphoric acid pre-etching times over 3 seconds. There were no significant differences in SBS and SFEs between the specimens with and without a smear layer. The data suggest that phosphoric acid pre-etching of ground enamel improves the bonding performance of single-step self-etch adhesives, but these bonding properties do not increase for phosphoric acid pre-etching times over 3 seconds.

Advanced Methods for Incorporating Solar Energy Technologies into Electric Sector Capacity-Expansion Models: Literature Review and Analysis

Energy Technology Data Exchange (ETDEWEB)

Sullivan, P.; Eurek, K.; Margolis, R.

2014-07-01

Because solar power is a rapidly growing component of the electricity system, robust representations of solar technologies should be included in capacity-expansion models. This is a challenge because modeling the electricity system--and, in particular, modeling solar integration within that system--is a complex endeavor. This report highlights the major challenges of incorporating solar technologies into capacity-expansion models and shows examples of how specific models address those challenges. These challenges include modeling non-dispatchable technologies, determining which solar technologies to model, choosing a spatial resolution, incorporating a solar resource assessment, and accounting for solar generation variability and uncertainty.

Effects of Isospin on Pre-scission Particle Multiplicity of Heavy Systems and Its Excitation Energy Dependence

Institute of Scientific and Technical Information of China (English)

YE Wei; CHEN Na

2004-01-01

Isospin effects on particle emission of fissioning isobaric sources 202Fr, 202po, 202Tl and isotopic sources 189,202,212Po, and its dependence on the excitation energy are studied via Smoluchowski equations. It is shown that with increasing the isospin of fissioning systems, charged-particle emission is not sensitive to the strength of nuclear dissipation. In addition, we have found that increasing the excitation energy not only increases the influence of nuclear dissipation on particle emission but also greatly enhances the sensitivity of the emission of pre-scission neutrons or charged particles to the isospin of the system. Therefore, in order to extract dissipation strength more accurately by taking light particle multiplicities it is important to choose both a highly excited compound nucleus and a proper kind of particles for systems with different isospins.

Interaction of atomic and low-energy deuterium with tungsten pre-irradiated with self-ions

International Nuclear Information System (INIS)

Ogorodnikova, O. V.; Markelj, S.; Toussaint, U. von

2016-01-01

Polycrystalline tungsten (W) specimens were pre-irradiated with self-ions to create identical samples with high density of defects up to ∼2.5 μm near the surface. Then, W specimens were exposed to either thermal atomic deuterium (D) beam with an incident energy of ∼0.2 eV or low energy D plasma with the incident energy varied between 5 and 200 eV at different sample temperatures. Each sample was exposed once at certain temperature and fluence. The D migration and accumulation in W were studied post-mortem by nuclear reaction method. It was shown that the rate of the D to occupy radiation-induced defects increases with increasing the incident energy, ion flux, and temperature. Experimental investigation was accompanied by modelling using the rate-equation model. Moreover, the analytical model was developed and benchmarked against numerical model. The calculations of the deuterium diffusion with trapping at radiation-induced defects in tungsten by analytical model are consistent with numerical calculations using rate-equation model. The data of reflection and penetration of atomic and low-energy D were taking from calculations using molecular dynamics (MD) with Juslin interatomic potentials and a binary collision code TRIM. MD calculations show an agreement with a binary collision code TRIM only in a very narrow range of deuterium energies between 1 and 20 eV. Incorporation of the data of reflection and penetration of deuterium in the macroscopic modelling has been done to verify the range of validity of calculations using MD and binary collision code TRIM by comparison of modelling results with experimental data. Modelling results are consistent with experiments using reflection and penetration data of D obtained from TRIM code for incident ion energy above 1 eV. Otherwise, the parameters obtained from MD should be incorporated in the rate-equation model to have a good agreement with the experiments

Pre-equilibrium gamma emissions

International Nuclear Information System (INIS)

Ghosh, Sudip

1993-01-01

Together with the direct reaction and the compound nuclear emissions the pre-equilibrium (PEQ) or pre-compound processes give a fairly complete picture of nuclear reactions induced by light ions at energies of some tens of MeV. PEQ particle emissions covering the higher energy continuum spectra have been investigated in detail both experimentally and theoretically. In contrast, very little work has been done on PEQ γ- emissions. The reason is that in spite of extensive work done on PEQ particle emissions, the mechanism is not yet fully understood. Also, the PEQ γ-emission cross-sections (∼ micro barns) are very small compared to the PEQ particle emission cross-sections (∼ milli barns). Yet apart from the academic interest the understanding of PEQ γ-emissions is important for applied fusion research etc. In this paper the PEQ γ-emissions is discussed and the work done in this field is reviewed. (author). 14 refs

Pre-scission 4He multiplicity in the 19F+197Au reaction

International Nuclear Information System (INIS)

Ikezoe, H.; Shikazono, N.; Nagame, Y.; Sugiyama, Y.; Tomita, Y.; Ideno, K.; Iwamoto, A.; Ohtsuki, T.

1990-01-01

Pre- and post-scission 4 He particle multiplicities for the 19 F+ 197 Au reaction in the excitation energy range of 43 to 90 MeV have been measured in coincidence with fission fragments. The coincident 4 He particles measured at backward angles are accounted for by evaporation from a compound nucleus and fission fragments. The most probable center-of-mass energy of the 4 He particles measured at backward angles is shifted towards lower energies by ∼2 MeV compared to a statistical model calculation performed by assuming 4 He emission from a spherical compound nucleus. The observed pre-scission 4 He multiplicity as a function of excitation energy is compared to a set of statistical-model calculations which also included the delayed onset of fission. The comparison shows that the observed energy dependence of the pre-scission 4 He multiplicity is reproduced by the calculation without taking into account the delayed onset of fission if the reduced emission barrier for 4 He is assumed in the calculation. The emission mechanism of the pre-scission 4 He is discussed

Energy saving potential of an indirect evaporative cooler as a pre-cooling unit for mechanical cooling systems in Iran

Energy Technology Data Exchange (ETDEWEB)

Delfani, Shahram; Esmaeelian, Jafar; Karami, Maryam [Department of Installation, Building and Housing Research Center (BHRC), PO Box 13145-1696, Tehran (Iran, Islamic Republic of); Pasdarshahri, Hadi [Department of Mechanical Engineering, Tarbiat Modares University, PO Box 14115-143, Tehran (Iran, Islamic Republic of)

2010-11-15

The performance of indirect evaporative cooling system (IEC) to pre-cool air for a conventional mechanical cooling system has been investigated for four cities of Iran. For this purpose, a combined experimental setup consisting of an IEC unit followed by a packaged unit air conditioner (PUA) was designed, constructed and tested. Two air simulators were designed and used to simulate indoor heating load and outdoor design conditions. Using of experimental data and an appropriate analytical method, the performance and energy reduction capability of combined system has been evaluated through the cooling season. The results indicate IEC can reduce cooling load up to 75% during cooling seasons. Also, 55% reduction in electrical energy consumption of PUA can be obtained. (author)

National Computer Security Conference Proceedings (12th): Information Systems Security: Solutions for Today - Concepts for Tomorrow Held in Baltimore, Maryland on 10-13 October 1989

Science.gov (United States)

1989-10-13

ACCRED 1 TAT I ONN MIANAG3EMENT I NVENTORY l’RODU I’S SYSTEMIS VUL.NERAB I L I TY TEMPEST SYSTEMS 462 Autoniating the procedure could also reduce user...Energy’s risk assessment needs. While it should be noted that the concept must be customized to an organization’s " culture ," way of doing business, etc., it...the worksheets. Data sets provided in the resource tables are customized to suit the needs and " culture " of the organization. The concept also allows

Initial conditions for hydrodynamics from weakly coupled pre-equilibrium evolution

International Nuclear Information System (INIS)

Mazeliauskas, Aleksas

2017-01-01

We use leading order effective kinetic theory to simulate the pre-equilibrium evolution of transverse energy and flow perturbations in heavy-ion collisions. We provide a Green function which propagates the initial perturbations of the energy-momentum tensor to a time when hydrodynamics becomes applicable. With this map, the pre-thermal evolution from saturated nuclei to hydrodynamics can be modeled in the framework of weakly coupled QCD. (paper)

Initial conditions for hydrodynamics from weakly coupled pre-equilibrium evolution

CERN Document Server

Keegan, Liam; Mazeliauskas, Aleksas; Teaney, Derek

2016-01-01

We use effective kinetic theory, accurate at weak coupling, to simulate the pre-equilibrium evolution of transverse energy and flow perturbations in heavy-ion collisions. We provide a Green function which propagates the initial perturbations to the energy-momentum tensor at a time when hydrodynamics becomes applicable. With this map, the complete pre-thermal evolution from saturated nuclei to hydrodynamics can be modelled in a perturbatively controlled way.

10 CFR 26.65 - Pre-access drug and alcohol testing.

Science.gov (United States)

2010-01-01

... 10 Energy 1 2010-01-01 2010-01-01 false Pre-access drug and alcohol testing. 26.65 Section 26.65... § 26.65 Pre-access drug and alcohol testing. (a) Purpose. This section contains pre-access testing... days. If an individual has negative results from drug and alcohol tests that were conducted under the...

Energy optimization and comparative study of pre- and post-fractionator extractive dividing wall column for the CO2–ethane azeotropic process

International Nuclear Information System (INIS)

Tavan, Yadollah; Riazi, Seiied Hadi; Nozohouri, Mostafa

2014-01-01

Graphical abstract: - Highlights: • Two arrangements is proposed for extractive DWC based on pre- and post- fractionator. • Operating parameters are optimized to minimize energy demand. • The pre-fractionator design showed the best performance in comparison to others. - Abstract: Two possible extractive dividing-wall column (DWC) arrangements are explored to find the potential benefits derived from thermally coupled distillations in separation of a mixture including the CO 2 –ethane azeotrope with a low boiling point. It is shown that the process including pre-fractionator in the DWC design in its optimized state leads to 51.6% reduction in total duties in comparison with the conventional process. Furthermore, a comparison between conventional extractive distillation columns and the new DWC process is made in terms of cost estimation, CO 2 removal efficiency and CO 2 emission reduction. Remarkable, the results clearly show that DWC process is interesting/feasible and the novel proposed DWC alternative reduces the steam requirements by 41% and the equipment costs by 31%

Effects of Borax on the Reduction of Pre-oxidized Panzhihua Ilmenite

Science.gov (United States)

Guo, Yufeng; Zheng, Fuqiang; Jiang, Tao; Chen, Feng; Wang, Shuai; Qiu, Guanzhou

2018-01-01

The effects of borax (sodium borate) on the enhancement reduction of pre-oxidized Panzhihua ilmenite were investigated. The effects of borax on the mineral phase transformation, microstructures, crystal cell parameter, melting point and Mg distribution were studied to reveal the mechanism of enhancement reduction. Under the constant reduction conditions, the borax could reduce the reduction activation energy of pre-oxidized ilmenite. The reduction kinetics analysis indicated that the reduction rate was controlled by interfacial chemical reaction. The reduction activation energy of the pre-oxidized ilmenite with 4% borax was 80.263 kJ/mol, which was 28.585 kJ/mol less than that of the pre-oxidized ilmenite without borax. Borax could eliminate the migration of Mg into the reduced particle center. The crystal cell parameter of the reduced product was increased by adding borax. Borax could improve the growth of dendritic crystals in the pre-oxidized ilmenite.

Reliability and Validity Assessment of a Linear Position Transducer

Science.gov (United States)

Garnacho-Castaño, Manuel V.; López-Lastra, Silvia; Maté-Muñoz, José L.

2015-01-01

The objectives of the study were to determine the validity and reliability of peak velocity (PV), average velocity (AV), peak power (PP) and average power (AP) measurements were made using a linear position transducer. Validity was assessed by comparing measurements simultaneously obtained using the Tendo Weightlifting Analyzer Systemi and T-Force Dynamic Measurement Systemr (Ergotech, Murcia, Spain) during two resistance exercises, bench press (BP) and full back squat (BS), performed by 71 trained male subjects. For the reliability study, a further 32 men completed both lifts using the Tendo Weightlifting Analyzer Systemz in two identical testing sessions one week apart (session 1 vs. session 2). Intraclass correlation coefficients (ICCs) indicating the validity of the Tendo Weightlifting Analyzer Systemi were high, with values ranging from 0.853 to 0.989. Systematic biases and random errors were low to moderate for almost all variables, being higher in the case of PP (bias ±157.56 W; error ±131.84 W). Proportional biases were identified for almost all variables. Test-retest reliability was strong with ICCs ranging from 0.922 to 0.988. Reliability results also showed minimal systematic biases and random errors, which were only significant for PP (bias -19.19 W; error ±67.57 W). Only PV recorded in the BS showed no significant proportional bias. The Tendo Weightlifting Analyzer Systemi emerged as a reliable system for measuring movement velocity and estimating power in resistance exercises. The low biases and random errors observed here (mainly AV, AP) make this device a useful tool for monitoring resistance training. Key points This study determined the validity and reliability of peak velocity, average velocity, peak power and average power measurements made using a linear position transducer The Tendo Weight-lifting Analyzer Systemi emerged as a reliable system for measuring movement velocity and power. PMID:25729300

Collecting Solar Energy. Solar Energy Education Project.

Science.gov (United States)

O'Brien, Alexander

This solar energy learning module for use with junior high school students offers a list of activities, a pre-post test, job titles, basic solar energy vocabulary, and diagrams of solar energy collectors and installations. The purpose is to familiarize students with applications of solar energy and titles of jobs where this knowledge could be…

Pre-Combustion Carbondioxide Capture in Integrated Gasification Combined Cycles

Directory of Open Access Journals (Sweden)

M. Zeki YILMAZOĞLU

2010-02-01

Full Text Available Thermal power plants have a significant place big proportion in the production of electric energy. Thermal power plants are the systems which converts heat energy to mechanical energy and also mechanical energy to electrical energy. Heat energy is obtained from combustion process and as a result of this, some harmful emissions, like CO2, which are the reason for global warming, are released to atmosphere. The contribution of carbondioxide to global warming has been exposed by the previous researchs. Due to this fact, clean energy technologies are growing rapidly all around the world. Coal is generally used in power plants and when compared to other fossil energy sources unit electricity production cost is less than others. When reserve rate is taken into account, coal may be converted to energy in a more efficient and cleaner way. The aim for using the clean coal technologies are to eradicate the harmful emissions of coal and to store the carbondioxide, orginated from combustion, in different forms. In line with this aim, carbondioxide may be captured by either pre-combustion, by O2/CO2 recycling combustion systems or by post combustion. The integrated gasification combined cycles (IGCC are available in pre-combustion capture systems, whereas in O2/CO2 recycling combustion systems there are ultrasuper critical boiler technologies and finally flue gas washing systems by amines exists in post combustion systems. In this study, a pre-combustion CO2 capture process via oxygen blown gasifiers is compared with a conventional power plant in terms of CO2 emissions. Captured carbondioxide quantity has been presented as a result of the calculations made throughout the study.

New features of the MAX IV thermionic pre-injector

Energy Technology Data Exchange (ETDEWEB)

Andersson, J., E-mail: joel.andersson@maxiv.lu.se; Olsson, D., E-mail: david.olsson@maxiv.lu.se; Curbis, F.; Malmgren, L.; Werin, S.

2017-05-21

The MAX IV facility in Lund, Sweden consists of two storage rings for production of synchrotron radiation. The smaller 1.5 GeV ring is presently under construction, while the larger 3 GeV ring is being commissioned. Both rings will be operating with top-up injections from a full-energy injector. During injection, the electron beam is first delivered to the main injector from a thermionic pre-injector which consists of a thermionic RF gun, a chopper system, and an energy filter. In order to reduce losses of high-energy electrons along the injector and in the rings, the electron beam provided by the thermionic pre-injector should have the correct time structure and energy distribution. In this paper, the design of the MAX IV thermionic pre-injector with all its sub components is presented. The electron beam delivered by the pre-injector and its dependence on parameters such as optics, cathode temperature, and RF power are studied. Measurements are here compared with simulation results obtained by particle tracking and electromagnetic codes. The chopper system is described in detail, and different driving schemes that optimize the injection efficiency for the two storage rings are investigated. During operation, it was discovered that the structure of the beam delivered by the gun is affected by mode beating between the accelerating and a low-order mode. This mode beating is also studied in detail. Finally, initial measurements of the electron beam delivered to the 3 GeV ring during commissioning are presented.

Nuclear choice: are health and safety issues pre-empted

International Nuclear Information System (INIS)

Henderson, G.B. II.

1980-01-01

This article examines the scope of the NRC's regulatory jurisdiction under the Atomic Energy Act in order to determine its proper effect on state siting laws. At the outset, a brief history of federal regulation of commercial nuclear power plants is set forth, and the cases that have dealt with the pre-emption issue in this area are reviewed. Next, an examination of the doctrine of federal pre-emption is conducted, focussing on the legal principles as they have been developed by the Supreme Court. Since the application of the pre-emption doctrine turns largely on the intent of Congress, the Atomic Energy Act and other pertinent federal legislation are examined to discern how far Congress has sought to extend its power over regulation of nuclear power. Some policy questions are also explored to determine whether it is appropriate to imply an intent on the part of Congress to pre-empt the field. Finally, a conclusion having been reached, the practical problems of what types of evidence may be admitted into the state siting agency's hearing are discussed and some solutions offered

China vs. USA: energy consumption of the two giants markets in 2010. Very strong growth in energy consumption in China and USA in 2010 which is well beyond the pre-crisis trend; this allows anticipation of a very strong global growth in 2010; China surpasses 10% of U.S.A's Energy consumption in 2010 - March 2011

International Nuclear Information System (INIS)

Lapillonne, Bruno

2011-01-01

Enerdata compares 2010 energy consumption between China and USA: China surpasses 10% of U.S.A's Energy consumption in 2010; Very strong growth in energy consumption in China and USA in 2010 which is well beyond the pre-crisis trend; this allows anticipation of a very strong global growth in 2010. (authors)

Energy metabolism and biotransformation as endpoints to pre-screen hepatotoxicity using a liver spheroid model

International Nuclear Information System (INIS)

Xu Jinsheng; Purcell, Wendy M.

2006-01-01

The current study investigated liver spheroid culture as an in vitro model to evaluate the endpoints relevant to the status of energy metabolism and biotransformation after exposure to test toxicants. Mature rat liver spheroids were exposed to diclofenac, galactosamine, isoniazid, paracetamol, m-dinitrobenzene (m-DNB) and 3-nitroaniline (3-NA) for 24 h. Pyruvate uptake, galactose biotransformation, lactate release and glucose secretion were evaluated after exposure. The results showed that pyruvate uptake and lactate release by mature liver spheroids in culture were maintained at a relatively stable level. These endpoints, together with glucose secretion and galactose biotransformation, were related to and could reflect the status of energy metabolism and biotransformation in hepatocytes. After exposure, all of the test agents significantly reduced glucose secretion, which was shown to be the most sensitive endpoint of those evaluated. Diclofenac, isoniazid, paracetamol and galactosamine reduced lactate release (P < 0.01), but m-DNB increased lactate release (P < 0.01). Diclofenac, isoniazid and paracetamol also reduced pyruvate uptake (P < 0.01), while galactosamine had little discernible effect. Diclofenac, galactosamine, paracetamol and m-DNB also reduced galactose biotransformation (P < 0.01), by contrast, isoniazid did not. The metabolite of m-DNB, 3-NA, which served as a negative control, did not cause significant changes in lactate release, pyruvate uptake or galactose biotransformation. It is concluded that pyruvate uptake, galactose biotransformation, lactate release and glucose secretion can be used as endpoints for evaluating the status of energy metabolism and biotransformation after exposure to test agents using the liver spheroid model to pre-screen hepatotoxicity

Pre-big bang in M-theory

OpenAIRE

Cavaglia, Marco

2001-01-01

We discuss a simple cosmological model derived from M-theory. Three assumptions lead naturally to a pre-big bang scenario: (a) 11-dimensional supergravity describes the low-energy world; (b) non-gravitational fields live on a three-dimensional brane; and (c) asymptotically past triviality.

Investigations of the pre-treatment and the conversion of energy crops into biogas and bioethanol; Untersuchungen zur Aufbereitung und Umwandlung von Energiepflanzen in Biogas und Bioethanol

Energy Technology Data Exchange (ETDEWEB)

Schumacher, Britt

2008-07-01

Due to finite fossil resources, one opportunity for the future is to increase the supply of energy out of renewable energy sources. One of many opportunities is the use of biomass, which offers plenty combinations of different kinds of biomass, paths of utilization and conversion techniques for a flexible adaptation to natural local and regional frameworks as well as the anthropogenic needs. For an efficient utilization of the limited arable land for the supply of bioenergy, there is a need of up-to-date and proof data about specific energy yields and yields per hectare. The aim of this investigation was to determine these data for the biogas and bioethanol sectors. Batch-tests were carried out in laboratory scaled digesters to investigate specific biogas and bioethanol yields. Additionally the testing of different techniques of pre-treatment for energy crops and their effects on the biogas yield and the progression of the formation of methane were focused. The conversion of maize silage and full ripe triticale into biogas and bioethanol was compared by an energy and environmental balance. The steam explosion technique was included. Pre-treatment The steam explosion pre-treatment of biomass increases the speed of formation of methane and partly increases the methane yields. The effects differ depending on the kind of biomass and the stage of ripening. Other techniques of pre-treatment like microwaving and cooking did not show significant or partly negative effects. A variation of parameters in the trial setup might be interesting. Besides the positive effects of the steam explosion technique there are some arguments like the additional costs of investment, the diminished concentration of nutrients respectively the increase of material flow against it. The additional energy consumption, mostly thermal energy, can be supplied from waste heat out of the combined heat and power plant (CHP). The screening and the production of technical enzymes for the efficient pre

Mechanism of waste biomass pyrolysis: Effect of physical and chemical pre-treatments

International Nuclear Information System (INIS)

Das, Oisik; Sarmah, Ajit K.

2015-01-01

To impart usability in waste based biomass through thermo-chemical reactions, several physical and chemical pre-treatments were conducted to gain an insight on their mode of action, effect on the chemistry and the change in thermal degradation profiles. Two different waste biomasses (Douglas fir, a softwood and hybrid poplar, a hardwood) were subjected to four different pre-treatments, namely, hot water pre-treatment, torrefaction, acid (sulphuric acid) and salt (ammonium phosphate) doping. Post pre-treatments, the changes in the biomass structure, chemistry, and thermal makeup were studied through electron microscopy, atomic absorption/ultra violet spectroscopy, ion exchange chromatography, and thermogravimetry. The pre-treatments significantly reduced the amounts of inorganic ash, extractives, metals, and hemicellulose from both the biomass samples. Furthermore, hot water and torrefaction pre-treatment caused mechanical disruption in biomass fibres leading to smaller particle sizes. Torrefaction of Douglas fir wood yielded more solid product than hybrid poplar. Finally, the salt pre-treatment increased the activation energies of the biomass samples (especially Douglas fir) to a great extent. Thus, salt pre-treatment was found to bestow thermal stability in the biomass. - Highlights: • Pre-treatments reduce ash, extractives, alkalines and hemicellulose from biomass. • Torrefaction of Douglas fir yields more solid product than hybrid poplar. • Salt pretreatment significantly increases the activation energy of biomass. • Acid and salt pretreatment bestows thermal stability in biomass.

Mechanism of waste biomass pyrolysis: Effect of physical and chemical pre-treatments

Energy Technology Data Exchange (ETDEWEB)

Das, Oisik [Department of Biological Systems Engineering, Washington State University, Pullman 99164-6120, WA (United States); Department of Civil and Environmental Engineering, University of Auckland, Auckland 1142 (New Zealand); Sarmah, Ajit K., E-mail: a.sarmah@auckland.ac.nz [Department of Civil and Environmental Engineering, University of Auckland, Auckland 1142 (New Zealand)

2015-12-15

To impart usability in waste based biomass through thermo-chemical reactions, several physical and chemical pre-treatments were conducted to gain an insight on their mode of action, effect on the chemistry and the change in thermal degradation profiles. Two different waste biomasses (Douglas fir, a softwood and hybrid poplar, a hardwood) were subjected to four different pre-treatments, namely, hot water pre-treatment, torrefaction, acid (sulphuric acid) and salt (ammonium phosphate) doping. Post pre-treatments, the changes in the biomass structure, chemistry, and thermal makeup were studied through electron microscopy, atomic absorption/ultra violet spectroscopy, ion exchange chromatography, and thermogravimetry. The pre-treatments significantly reduced the amounts of inorganic ash, extractives, metals, and hemicellulose from both the biomass samples. Furthermore, hot water and torrefaction pre-treatment caused mechanical disruption in biomass fibres leading to smaller particle sizes. Torrefaction of Douglas fir wood yielded more solid product than hybrid poplar. Finally, the salt pre-treatment increased the activation energies of the biomass samples (especially Douglas fir) to a great extent. Thus, salt pre-treatment was found to bestow thermal stability in the biomass. - Highlights: • Pre-treatments reduce ash, extractives, alkalines and hemicellulose from biomass. • Torrefaction of Douglas fir yields more solid product than hybrid poplar. • Salt pretreatment significantly increases the activation energy of biomass. • Acid and salt pretreatment bestows thermal stability in biomass.

Feasibility study on the potential of development of renewable energies, and of creation of a heat or cold network - Pre Fleury ZAC (municipalities of Chagny and Chassagne-Montrachet)

International Nuclear Information System (INIS)

2014-01-01

The Pre Fleury ZAC (in Burgundy - France) is an activity planning project area which is mainly focussed on the wine sector. After a presentation of the context and project, notably regarding energy needs, mobilisable fossil energies, heat and cold networks, this report addresses the study of a possible use of renewable energies (solar, wood, wind, hydraulic, geothermal, aero-thermal energies) with an assessment of possible gains in terms of CO 2 emissions. It discusses the management of energy consumption through different ways and in different aspects such as: use of bio-climatic techniques, equipment energy efficiency, discussion and dialogue about energetic issues, mobility issues (public transit, bicycle paths), and public lighting

Ultrasound pre-treatment for anaerobic digestion improvement.

Science.gov (United States)

Pérez-Elvira, S; Fdz-Polanco, M; Plaza, F I; Garralón, G; Fdz-Polanco, F

2009-01-01

Prior research indicates that ultrasounds can be used in batch reactors as pre-treatment before anaerobic digestion, but the specific energy required at laboratory-scale is too high. This work evaluates both the continuous ultrasound device performance (efficiency and solubilisation) and the operation of anaerobic digesters continuously fed with sonicated sludge, and presents energy balance considerations. The results of sludge solubilisation after the sonication treatment indicate that, applying identical specific energy, it is better to increase the power than the residence time. Working with secondary sludge, batch biodegradability tests show that by applying 30 kWh/m3 of sludge, it is possible to increase biogas production by 42%. Data from continuous pilot-scale anaerobic reactors (V=100 L) indicate that operating with a conventional HRT=20 d, a reactor fed with pre-treated sludge increases the volatile solids removal and the biogas production by 25 and 37% respectively. Operating with HRT=15 d, the removal efficiency is similar to the obtained with a reactor fed with non-hydrolysed sludge at HTR=20 d, although the specific biogas productivity per volume of reactor is higher for the pretreated sludge. Regarding the energy balance, although for laboratory-scale devices it is negative, full-scale suppliers state a net generation of 3-10 kW per kW of energy used.

Effects of Unit Design on Acute Care Nurses' Walking Distances, Energy Expenditure, and Job Satisfaction: A Pre-Post Relocation Study.

Science.gov (United States)

Copeland, Darcy; Chambers, Misty

2017-07-01

The purpose of this study was to determine what differences occurred in steps taken and energy expenditure among acute care nurses when their work environment moved from a hospital with centralized nurses' stations to a hospital with decentralized nurses' stations. Additional goals were to determine design features nurses perceived as contributing to or deterring from their work activities and what changes occurred in reported job satisfaction. Since design features can also affect patient outcomes, patient falls were monitored. The construction of a replacement facility for a 224-bed Level 1 trauma center provided the opportunity to compare the effects of centralized versus decentralized nurses' stations on nurses' experiences of their work environments. A pre-post quasi-experimental design was used. RN participants completed an open-ended questionnaire and recorded pedometer data at the end of each shift, working for 3-month pre-relocation and for 3-month post-relocation. Nine months passed between the move and post-relocation data collection. There were significant reductions in nurses' energy expenditure ( p job satisfaction was high and improved post-relocation, and patient falls decreased by 55%. Post-relocation, a number of the dissatisfiers associated with the physical environment were eliminated, and nurses identified more satisfiers (in general and related to the physical environment). Patients are safer post-relocation as indicated by a decrease in falls. This decrease is even more noteworthy when considering that the numbers of patient beds on each unit is higher post-relocation.

A novel solar energy integrated low-rank coal fired power generation using coal pre-drying and an absorption heat pump

International Nuclear Information System (INIS)

Xu, Cheng; Bai, Pu; Xin, Tuantuan; Hu, Yue; Xu, Gang; Yang, Yongping

2017-01-01

Highlights: •An improved solar energy integrated LRC fired power generation is proposed. •High efficient and economic feasible solar energy conversion is achieved. •Cold-end losses of the boiler and condenser are reduced. •The energy and exergy efficiencies of the overall system are improved. -- Abstract: A novel solar energy integrated low-rank coal (LRC) fired power generation using coal pre-drying and an absorption heat pump (AHP) was proposed. The proposed integrated system efficiently utilizes the solar energy collected from the parabolic trough to drive the AHP to absorb the low-grade waste heat of the steam cycle, achieving larger amount of heat with suitable temperature for coal’s moisture removal prior to the furnace. Through employing the proposed system, the solar energy could be partially converted into the high-grade coal’s heating value and the cold-end losses of the boiler and the steam cycle could be reduced simultaneously, leading to a high-efficient solar energy conversion together with a preferable overall thermal efficiency of the power generation. The results of the detailed thermodynamic and economic analyses showed that, using the proposed integrated concept in a typical 600 MW LRC-fired power plant could reduce the raw coal consumption by 4.6 kg/s with overall energy and exergy efficiencies improvement of 1.2 and 1.8 percentage points, respectively, as 73.0 MW th solar thermal energy was introduced. The cost of the solar generated electric power could be as low as $0.044/kW h. This work provides an improved concept to further advance the solar energy conversion and utilisation in solar-hybrid coal-fired power generation.

Pre-heating mitigates composite degradation.

Science.gov (United States)

Silva, Jessika Calixto da; Rogério Vieira, Reges; Rege, Inara Carneiro Costa; Cruz, Carlos Alberto dos Santos; Vaz, Luís Geraldo; Estrela, Carlos; Castro, Fabrício Luscino Alves de

2015-01-01

Dental composites cured at high temperatures show improved properties and higher degrees of conversion; however, there is no information available about the effect of pre-heating on material degradation. Objectives This study evaluated the effect of pre-heating on the degradation of composites, based on the analysis of radiopacity and silver penetration using scanning electron microscopy/energy-dispersive X-ray spectroscopy (SEM/EDS). Material and Methods Thirty specimens were fabricated using a metallic matrix (2x8 mm) and the composites Durafill VS (Heraeus Kulzer), Z-250 (3M/ESPE), and Z-350 (3M/ESPE), cured at 25°C (no pre-heating) or 60°C (pre-heating). Specimens were stored sequentially in the following solutions: 1) water for 7 days (60°C), plus 0.1 N sodium hydroxide (NaOH) for 14 days (60°C); 2) 50% silver nitrate (AgNO3) for 10 days (60°C). Specimens were radiographed at baseline and after each storage time, and the images were evaluated in gray scale. After the storage protocol, samples were analyzed using SEM/EDS to check the depth of silver penetration. Radiopacity and silver penetration data were analyzed using ANOVA and Tukey's tests (α=5%). Results Radiopacity levels were as follows: Durafill VSZ-350>Z-250 (pheated specimens presented higher radiopacity values than non-pre-heated specimens (pheated specimens (pheating at 60°C mitigated the degradation of composites based on analysis of radiopacity and silver penetration depth.

CHEMICAL AND ENERGETIC CONTENT OF CORN BEFORE AND AFTER PRE-CLEANING

Directory of Open Access Journals (Sweden)

Sandra Iara Furtado Costa Rodrigues

2015-04-01

Full Text Available The poultry industry normally has little control over the raw material that arrives at the processing plant. This experiment aimed to evaluate chemical and energetic quality of corn obtained in a feed mill before and after pre-cleaning. Twenty samples of 30 kg of corn each were taken from trucks delivering corn to the mill. The trucks were then unloaded and the material passed through a pre-cleaning process when another sample was taken. Samples were graded and physical properties evaluated: density (g/L, grain percentages of foreign material, impurities, fragments, broken, soft, insect damaged, fire-burnt, fermented, damaged, cracked and fine particles, as well as chemical composition analysis: Apparent metabolizable energy for poultry (AME, ether extract (EE, crude fiber (CF, starch (STA, water activity (WA, crude protein (CP, digestible and total lysine, methionine, cystine, threonine, tryptophan, valine, isoleucine, leucine, phenylalanine, histidine and arginine. The experiment was a randomized design with two treatments (before and after pre-cleaning and twenty replications. Data was analyzed using SAS ® and treatment differences obtained using F test. Correlations and principal components were calculated. There was a decrease in density after the pre-cleaning process, which was probably due to the removal of earth and stones rather than grain and its fractions. Significant increases were found for insect damage, fermented and damaged grain while fire-burn was significantly reduced after the pre-cleaning process. Starch increased after pre-cleaning which is a result of contaminants that normally are poor in this carbohydrate, but fiber levels increased too. Apparent metabolizable energy, aminoacids, digestible (P<0.05 and total (P<0.05 histidine, total lysine and methionine (P<0.1 levels were reduced after pre-cleaning. Density was higher when there were fewer impurities such as straw, husk or small grains. Broken corn was positively

Sludge pre-treatment with pulsed electric fields

Energy Technology Data Exchange (ETDEWEB)

Kopplow, O.; Barjenbruch, M.; Heinz, V.

2003-07-01

The anaerobic stabilization process depends - among others - on the bio-availability of organic carbon. Through pre-treatment of the sludge which leads to the destruction of micro-organisms and to the setting-free of cell content substances (disintegration), the carbon can be microbially converted better and faster. Moreover, effects on the digestion are likely. However, only little experience is available in the sludge treatment with pulsed electric fields. Laboratory-scale digestion tests have been run to analyse the influence of pulsed electric fields on the properties of sludge, anaerobic degradation, sludge water reload and foaming of digesters. The results will be compared with those of other disintegration methods (high pressure homogenise, thermal treatment). The effect of pre-treatment on the sludge is shown by the COD release. Degrees of disintegration have been achieved up to 20%. The specific energy input was high. The energy consumption has been decreased by initial improvements (pre-heating to 55{sup o}C). The filament bacteria were partially destroyed. The foam reduction in the digesters was marginal. The anaerobic degradation performance has been improved in every case. The degradation rate of organic matter increased about 9%. Due to the increase of degradation, there is a higher reload of the sludge-water with COD and nitrogen compounds. (author)

Size Effect on Failure of Pre-stretched Free-Standing Nanomembranes

Directory of Open Access Journals (Sweden)

Cheng Wenlong

2010-01-01

Full Text Available Abstract Free-standing nanomembranes are two-dimensional materials with nanometer thickness but can have macroscopic lateral dimensions. We develop a fracture model to evaluate a pre-stretched free standing circular ultrathin nanomembrane and establish a relation between the energy release rate of a circumferential interface crack and the pre-strain in the membrane. Our results demonstrate that detachment cannot occur when the radius of the membrane is smaller than a critical size. This critical radius is inversely proportional to the Young’s modulus and square of the pre-strain of the membrane.

Aspekt formalnoprawny stosowania systemów ustalania lokalizacji w czasie rzeczywistym do eliminacji marnotrawstwa w procesie budowlanym

Directory of Open Access Journals (Sweden)

Piotr Nowotarski

2017-06-01

Full Text Available W artykule przedstawiono ideę systemów typu RTLS pod kątem wykorzystania ich w celu eliminacji marnotrawstwa w procesie budowlanym. Opisywane systemy z punktu widzenia strumienia wartości są pomocne w wykrywaniu czynności niedodających wartości. Autorzy przedstawili temat w aspekcie formalno-prawnym związanym z monitorowaniem i śledzeniem pracowników podczas pracy. Zwrócono uwagę na niezbędne dokumenty, pozwolenia, zgłoszenia i zgody pracowników, które zgodnie z obowiązującym w Polsce prawem należy posiadać, aby móc wykorzystywać tego typu systemy do zbierania i przetwarzania danych o lokalizacji pracowników w trakcie wykonywania prac.

Geometrically exact nonlinear analysis of pre-twisted composite rotor blades

Directory of Open Access Journals (Sweden)

Li'na SHANG

2018-02-01

Full Text Available Modeling of pre-twisted composite rotor blades is very complicated not only because of the geometric non-linearity, but also because of the cross-sectional warping and the transverse shear deformation caused by the anisotropic material properties. In this paper, the geometrically exact nonlinear modeling of a generalized Timoshenko beam with arbitrary cross-sectional shape, generally anisotropic material behavior and large deflections has been presented based on Hodges’ method. The concept of decomposition of rotation tensor was used to express the strain in the beam. The variational asymptotic method was used to determine the arbitrary warping of the beam cross section. The generalized Timoshenko strain energy was derived from the equilibrium equations and the second-order asymptotically correct strain energy. The geometrically exact nonlinear equations of motion were established by Hamilton’s principle. The established modeling was used for the static and dynamic analysis of pre-twisted composite rotor blades, and the analytical results were validated based on experimental data. The influences of the transverse shear deformation on the pre-twisted composite rotor blade were investigated. The results indicate that the influences of the transverse shear deformation on the static deformation and the natural frequencies of the pre-twisted composite rotor blade are related to the length to chord ratio of the blade. Keywords: Geometrically exact, Nonlinear, Pre-twisted composite blade, Transverse shear deformation, Variational asymptotic, Warping

Pre-season dietary intake of professional soccer players.

Science.gov (United States)

Raizel, Raquel; da Mata Godois, Allan; Coqueiro, Audrey Yule; Voltarelli, Fabrício Azevedo; Fett, Carlos Alexandre; Tirapegui, Julio; de Paula Ravagnani, Fabricio Cesar; de Faria Coelho-Ravagnani, Christianne

2017-12-01

Despite the well-documented importance of nutrition in optimizing performance and health, the dietary intake of soccer players has attracted little attention. We aimed to assess the pre-season dietary intake of professional soccer players and its adequacy in macro and micronutrients. The pre-season dietary intake of 19 male athletes was assessed using a semi-structured 3-day food record. To determine dietary adequacy and excess, energy and macronutrient intake were compared with the Brazilian dietary reference values for athletes, and micronutrients were compared with the Estimated Average Requirement - EAR (minimum recommendation) and Tolerable Upper Intake Level - UL (maximum recommendation). Mean daily energy intake (40.74±12.81 kcal/kg) was adequate. However, there was a low carbohydrate intake (5.44±1.86 g/kg/day) and a high amount of protein and fat (1.91±0.75 and 1.27±0.50 g/kg/day, respectively). Sodium intake (3141.77±939.76 mg/day) was higher than UL (2300 mg/day), while the majority of players showed daily intake of vitamin A (74%), vitamin D (100%), folate (58%), calcium and magnesium (68%) below the EAR (625, 10 and 320 µg/day, 800 and 330 mg/day, respectively). The dietary intake of professional soccer players was adequate in energy, but inadequate in macro and micronutrients, which suggests the need to improve nutritional practices to sustain the physical demands of soccer during pre-season.

Effect of pre-emulsified sesame oil on physical-chemical and rheological properties of pork batters

Directory of Open Access Journals (Sweden)

Zhuang Li KANG

Full Text Available Abstract Physical-chemical and rheological properties of pork batters as affected by replacing pork back-fat with pre-emulsified sesame oil were investigated. Replacement of pork back-fat with pre-emulsified sesame oil, improved L* value, moisture and protein content, hardness, cohesiveness, and chewiness, declined a* value, fat content and energy, but not affect cooking yield. When used pre-emulsified sesame oil to replace pork back-fat 50%, the sample had the highest L* value and texture. According to the results of dynamic rheological, replaced pork back-fat by pre-emulsified sesame oil increased the storage modulus (G' values at 80 °C, and formed firm gel. The result of Low-field nuclear magnetic resonance (LF-NMR shown that the batters with pre-emulsified sesame oil had higher water holding capacity than the control. Overall, the batters with pre-emulsified sesame oil enabled lowering of fat and energy contents, making the pork batter had better texture.

Pre-equilibrium complex particle emission

International Nuclear Information System (INIS)

Bĕták, E.

2002-01-01

Semi-classical (phenomenological) pre-equilibrium emission of clusters of nucleons (complex particles) such as deuterons, tritons, helions and α particles from reactions induced by light projectiles (nucleons to α’s) is addressed. The main attention is given to the hard components in the emission energetic spectra, which play an increasing role at incident energies above 20 MeV, and are currently attributed to a presence of some kind of pre-equilibrium processes. In addition, the mechanisms of cluster reactions show special features such as the competition between pickup and knockout processes and the contributions of several successive steps in the reaction. The main frame used here to illustrate the processes and interplays of the competing mechanisms of pre-equilibrium cluster formation and emission, namely the coalescence, pick-up and knock-out, is the pre-equilibrium exciton model. It obviously contains the process of clusterization itself as its organic part. The most important case of complex particles with the largest amount of experimental data is that of alpha emission, which therefore naturally attracts most of the attention and where the widest range of possible mechanisms is available on the market. The loosely bound ejectiles, on the other side, are usually not able to demonstrate all features of the whole spectrum of contributing mechanisms, but they are nevertheless an important link between the nucleon emission and the cluster one.

The Equilibrium and Pre-equilibrium Triton Emission Spectra of Some Target Nuclei for ( n, xt) Reactions up to 45 MeV Energy

Science.gov (United States)

Tel, E.; Kaplan, A.; Aydın, A.; Özkorucuklu, S.; Büyükuslu, H.; Yıldırım, G.

2010-08-01

Although there have been significant research and development studies on the inertial and magnetic fusion reactor technology, there is still a long way to go to penetrate commercial fusion reactors to the energy market. Tritium self-sufficiency must be maintained for a commercial power plant. For self-sustaining (D-T) fusion driver tritium breeding ratio should be greater than 1.05. So, working out the systematics of ( n,t) reaction cross sections and triton emission differential data are important for the given reaction taking place on various nuclei at different energies. In this study, ( n,xt) reactions for some target nuclei as 16O, 27Al, 59Co and 209Bi have been investigated up to 45 MeV incident neutron energy. In the calculations of the triton emission spectra, the pre-equilibrium and equilibrium effects have been used. The calculated results have been compared with the experimental data taken from the literature.

Residential Pre-Cooling: Mechanical Cooling and Air-Side Economizers:

OpenAIRE

Turner, William J.N; Walker, Iain S.; Roux, Jordan

2012-01-01

This study used an advanced airflow, energy and humidity modeling tool to evaluate residential air-side economizers and mechanical pre-cooling strategies using the air conditioner, in all US DOE Climate Zones for a typical new home with ASHRAE Standard 62.2 compliant ventilation. A residential air-side economizer is a large supply fan used for night ventilation. Mechanical pre-cooling used the building air conditioner operating at lower than usual set before the peak demand period. The simula...

How far are transmission measurements of pre-equilibrium stopping influenced by impact parameter selection?

International Nuclear Information System (INIS)

Semrad, D.; Bergsmann, M.; Bauer, P.; Diez-Muino, R.; Arnau, S.A.

2000-01-01

A slow ion that impinges on a target will need to travel a certain distance within the target - called pre-equilibrium length - in order to reach charge equilibrium. In this transient region, projectiles may suffer energy loss different from the mean value. For gas targets, most of the relevant cross-sections and energy transfers can be determined separately by experiment. This allows one to relate these data to the stopping cross-section and to simulate the passage of ions through gas by Monte-Carlo techniques. For solid targets matter is worse, but a universal formalism how pre-equilibrium processes may be determined from transmission data is well documented by Sigmund [14-15]. In transmission experiments usually only these projectiles are analyzed that have missed the central region of the target atoms. It is, however, a matter of fact that projectiles passing closer to the nucleus are more likely to lose energy. In the case of thin targets these projectiles are deflected out of the detector acceptance leading to a reduction of the measured average energy loss. Hence, stopping data may be influenced by so-called impact parameter selection (IPS) according to the layout of the experiment. This IPS clearly acts also in the regime of pre-equilibrium stopping. Using Monte-Carlo simulation we studied to which extent in a typical transmission experiment energy loss is influenced by pre-equilibrium stopping and by IPS, respectively. For feasibility, instead of a solid target, we follow the trajectories through a dense gas target. We find that in an actual experiment with small detector opening angle the formalism to describe pre-equilibrium stopping has to include IPS

Dynamic of fission and quasi-fission revealed by pre-scission neutron evaporation

International Nuclear Information System (INIS)

Hinde, D.J.

1991-06-01

The dependence of pre-scission neutron multiplicities (ν-pre) on the mass-split and total kinetic energy (TKE) in fusion-fission and quasi-fission has been measured for a wide range of projectile-target combinations. the data indicate that the fusion-fission time scale is shorter for asymmetric splits than for symmetric splits, whilst there is no dependence on TKE. For quasi-fission reactions induced using 64 Ni projectiles, ν-pre falls rapidly with increasing TKE, indicating that these neutrons are emitted near to or after scission. A new interpretation of both neutron multiplicities and mean energies (the neutron clock-thermometer) allows the extraction of time scales with much less uncertainty than previously, and also gives information about the deformation from which the neutrons are emitted. 15 refs., 13 figs

Mass attenuation coefficient of binderless, pre-treated and tannin-based Rhizophora spp. particleboards using 16.59 – 25.26 keV photon energy range

Energy Technology Data Exchange (ETDEWEB)

Mohd Yusof, Mohd Fahmi, E-mail: mfahmi@usm.my; Hamid, Puteri Nor Khatijah Abdul; Tajuddin, Abdul Aziz [School of Physics, Universiti Sains Malaysia, 11800 Penang (Malaysia); Bauk, Sabar [School of Distance Education, Universiti Sains Malaysia, 11800 Penang (Malaysia); Hashim, Rokiah [School of Industrial Technologies, Universiti Sains Malaysia, 11800 Penang (Malaysia)

2015-04-29

The Rhizophora spp. particleboards were fabricated using ≤ 104 µm particle size at three different fabrication methods; binderless, steam pre-treated and tannin-added. The mass attenuation coefficient of Rhizophora spp. particleboards were measured using x-ray fluorescent (XRF) photon from niobium, molybdenum, palladium, silver and tin metal plates that provided photon energy between 16.59 to 25.26 keV. The results were compared to theoretical values for water calculated using photon cross-section database (XCOM).The results showed that all Rhizophora spp. particleboards having mass attenuation coefficient close to calculated XCOM for water. Tannin-added Rizophora spp. particleboard was nearest to calculated XCOM for water with χ2 value of 13.008 followed by binderless Rizophora spp. (25.859) and pre-treated Rizophora spp. (91.941)

Mass attenuation coefficient of binderless, pre-treated and tannin-based Rhizophora spp. particleboards using 16.59 – 25.26 keV photon energy range

International Nuclear Information System (INIS)

Mohd Yusof, Mohd Fahmi; Hamid, Puteri Nor Khatijah Abdul; Tajuddin, Abdul Aziz; Bauk, Sabar; Hashim, Rokiah

2015-01-01

The Rhizophora spp. particleboards were fabricated using ≤ 104 µm particle size at three different fabrication methods; binderless, steam pre-treated and tannin-added. The mass attenuation coefficient of Rhizophora spp. particleboards were measured using x-ray fluorescent (XRF) photon from niobium, molybdenum, palladium, silver and tin metal plates that provided photon energy between 16.59 to 25.26 keV. The results were compared to theoretical values for water calculated using photon cross-section database (XCOM).The results showed that all Rhizophora spp. particleboards having mass attenuation coefficient close to calculated XCOM for water. Tannin-added Rizophora spp. particleboard was nearest to calculated XCOM for water with χ2 value of 13.008 followed by binderless Rizophora spp. (25.859) and pre-treated Rizophora spp. (91.941)

NextGen Flight Deck Data Comm : Auxiliary Synthetic Speech Phase II

Science.gov (United States)

2015-07-01

Data Comma text-based controller-pilot communication systemis expected to yield several NextGen safety and efficiency benefits. With Data Comm, communication becomes a visual task, and may potentially increase head-down time on the flight deck ...

Reconstructing the eruption magnitude and energy budgets for the pre-historic eruption of the monogenetic ˜5 ka Mt. Gambier Volcanic Complex, south-eastern Australia

Science.gov (United States)

van Otterloo, Jozua; Cas, Raymond A. F.

2013-12-01

Understanding explosive volcanic eruptions, especially phreatomagmatic eruptions, their intensities and energy budgets is of major importance when it comes to risk and hazard studies. With only a few historic occurrences of phreatomagmatic activity, a large amount of our understanding comes from the study of pre-historic volcanic centres, which causes issues when it comes to preservation and vegetation. In this research, we show that using 3D geometrical modelling it is possible to obtain volume estimates for different deposits of a pre-historic, complex, monogenetic centre, the Mt. Gambier Volcanic Complex, south-eastern Australia. Using these volumes, we further explore the energy budgets and the magnitude of this eruption (VEI 4), including dispersal patterns (eruption columns varying between 5 and 10 km, dispersed towards north-east to south), to further our understanding of intraplate, monogenetic eruptions involving phreatomagmatic activity. We also compare which thermodynamic model fits best in the creation of the maar crater of Mt. Gambier: the major-explosion-dominated model or the incremental growth model. In this case, the formation of most of the craters can best be explained by the latter model.

An inplementation strategy for the utilization of wind energy in Estonia. Phase 1: Pre-feasibility study and project identification. Final report

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-01

This report presents the results of a pre-feasibility and project identification study with the purpose of investigating the possibilities for wind energy in Estonia and to recommend on possible actions, as outlined in Letters of Interest from the Estonian Ministries of Economy and Environment in 1995. Wind as source of energy in Estonia appears not yet to have been analyzed in detail. Available data indicates that wind can constitute a viable domestic source of energy, as average wind speeds of about 6 m/s (at 10 m) are reported at many coastal regions of Estonia. With state-of-the-art wind energy technology this means cost of wind produced electricity about 0.7-0.8 EEK/kWh - comparable to the cost of electricity from a modern coal-fired power plant. Two types of grids exist in these regions: On the mainland and on islands with sea cable grid connected wind turbines can be implemented. On islands without sea cable wind turbines can be connected to the diesel powered local grids. As a first step it is proposed to undertake the detailed planning and feasibility study of grid connected wind energy demonstrations in the framework of the Danish-Estonian country collaboration agreement. If the decision is made to implement this wind energy demonstration project, a certain proportion of grant money should be allocated for the demonstration. Subsequent steps in the Danish-Estonian country collaboration agreement should include the detailed planning and feasibility studies of autonomous wind energy demonstration and the associated capacity building. (EG)

Effect of MeV energy He and N pre-implantation on the formation of porous silicon

International Nuclear Information System (INIS)

Manuaba, A.; Paszti, F.; Ortega, C.; Grosman, A.; Horvath, Z.E.; Szilagyi, E.; Khanh, N.Q.; Vickridge, I.

2001-01-01

The effects of MeV energy He and N pre-implantation of Si substrate on the structure of porous silicon formed by anodic etching were studied by measuring the depth profiles of 15 N decorating the pores walls. Radiation damage was recovered by annealing after the implantation. It was found that the He implant accelerates the etching process, probably due to the bubbles or the remaining lattice damage. At a dose of 8x10 16 ions/cm 2 the He containing layer was formed with a significantly enhanced porosity due to the contribution of the large-sized bubbles. At the highest dose of 32.5x10 16 ions/cm 2 flaking took place during the anodic etching. In contrast to He, N stopped the anodic etching at a depth of critical N concentration of ∼0.9 at.%. For the lowest implantation dose, where the peak concentration was below this limit, the pores propagate through the implanted layer with an enhanced speed

Compatibility of the SE4ALL Energy Efficiency Objective with Renewable Energy, Energy Access, and Climate Mitigation Targets

DEFF Research Database (Denmark)

Gregg, Jay Sterling; Balyk, Olexandr; Solér, Ola

over pre-industrial times. To accomplish this, pathways are constructed for each objective, which then form the basis for a scenario analysis using the Energy Technology System Analysis Program TIMES Integrated Assessment Model (ETSAP-TIAM). We find that, in general, the energy efficiency objective...

Indian Energy Policy and Strategy: Pre- and Post-Copenhagen 2009

Directory of Open Access Journals (Sweden)

Megha Shenoy

2013-02-01

Full Text Available Published by Palgrave MacmillanIndia is an extraordinarily diverse democratic country with one of the fastest growing economies in the world. It is the world’s sixth largest consumer of energy. Interest in its energy policies and strategies is escalating due to their huge impact on geopolitical relations, global energy prices and climate change. Its current per capita energy consumption and GHG emission values are low; however, these are bound to increase if it continues on the path of development that the West has followed. If India is to ‘leapfrog’ the already well-trodden path to one that ensures sustainable development, it is imperative for the country to redefine its development paradigm in order to ensure inclusive growth. Unsustainable subsidies, poor reform implementation, distorted energy prices and inadequate investment in renewables are some of the major constraints that the Indian government needs to re-examine so as to increase energy security and provide a framework for transition to a low-carbon economy. In addition to innovative energy policies such as the National Solar Mission, the National Mission on Enhanced Energy Efficiency and the National Mission on Sustainable Habitat, India needs to adopt a framework for decoupled growth, which we consider as an increase in the quality of life for its citizens without an increase in environmental damage. Since 2008 India has demonstrated that it is serious about changing its growth pattern and moving towards clean energy alternatives. However, this vision will not be fully realised unless the global North provides technical and financial assistance to collectively mitigate the adverse impact of global warming and subsequent climate change.

How energy can be more rationally used. Technical possibilities and facts of business management. Under the pressure of rising energy costs

Energy Technology Data Exchange (ETDEWEB)

Klein, H; Ziegler, A [Bundesministerium fuer Forschung und Technologie, Bonn (Germany, F.R.)

1976-03-01

The article deals with the technical possibilities and economical operating facts of rational energy consumption. Beginning with a short discussion of the available energy reserves it is shown that a rational way of dealing with energy can already be pre-programmed in the choice of the energy form for each particular consumption purpose. Economic growth, indeed, promotes the rational use of energy. The following main points are individually discussed: related subjects in economic pre-planning operation, energy economy in the heating of houses, questions of environmental protection. The article ends with a look at future aspects of rational energy utilization.

Improvement of anaerobic digestion of sewage sludge in a wastewater treatment plant by means of mechanical and thermal pre-treatments: Performance, energy and economical assessment.

Science.gov (United States)

Ruffino, Barbara; Campo, Giuseppe; Genon, Giuseppe; Lorenzi, Eugenio; Novarino, Daniel; Scibilia, Gerardo; Zanetti, Mariachiara

2015-01-01

Performances of mechanical and low-temperature (disintegration rates of one order of magnitude higher than mechanical ones (about 25% vs. 1.5%). The methane specific production increased by 21% and 31%, with respect to untreated samples, for treatment conditions of respectively 70 and 90°C, 3h. Thermal pre-treatments also decreased WAS viscosity. Preliminary energy and economic assessments demonstrated that a WAS final total solid content of 5% was enough to avoid the employment of auxiliary methane for the pre-treatment at 90°C and the subsequent AD process, provided that all the heat generated was transferred to WAS through heat exchangers. Moreover, the total revenues from sale of the electricity produced from biogas increased by 10% with respect to the present scenario. Copyright © 2014 Elsevier Ltd. All rights reserved.

Energy and macronutrient content of familiar beverages interact with pre-meal intervals to determine later food intake, appetite and glycemic response in young adults.

Science.gov (United States)

Panahi, Shirin; Luhovyy, Bohdan L; Liu, Ting Ting; Akhavan, Tina; El Khoury, Dalia; Goff, H Douglas; Harvey Anderson, G

2013-01-01

The objective was to compare the effects of pre-meal consumption of familiar beverages on appetite, food intake, and glycemic response in healthy young adults. Two short-term experiments compared the effect of consumption at 30 (experiment 1) or 120 min (experiment 2) before a pizza meal of isovolumetric amounts (500 mL) of water (0 kcal), soy beverage (200 kcal), 2% milk (260 kcal), 1% chocolate milk (340 kcal), orange juice (229 kcal) and cow's milk-based infant formula (368 kcal) on food intake and subjective appetite and blood glucose before and after a meal. Pre-meal ingestion of chocolate milk and infant formula reduced food intake compared to water at 30 min, however, beverage type did not affect food intake at 2h. Pre-meal blood glucose was higher after chocolate milk than other caloric beverages from 0 to 30 min (experiment 1), and after chocolate milk and orange juice from 0 to 120 min (experiment 2). Only milk reduced post-meal blood glucose in both experiments, suggesting that its effects were independent of meal-time energy intake. Combined pre- and post-meal blood glucose was lower after milk compared to chocolate milk and orange juice, but did not differ from other beverages. Thus, beverage calorie content and inter-meal intervals are primary determinants of food intake in the short-term, but macronutrient composition, especially protein content and composition, may play the greater role in glycemic control. Copyright © 2012 Elsevier Ltd. All rights reserved.

Ultrasound assisted biogas production from co-digestion of wastewater sludges and agricultural wastes: Comparison with microwave pre-treatment.

Science.gov (United States)

Aylin Alagöz, B; Yenigün, Orhan; Erdinçler, Ayşen

2018-01-01

This study investigates the effect of ultrasonication and microwave sludge disintegration/pre-treatment techniques on the anaerobic co-digestion efficiency of wastewater sludges with olive and grape pomaces. The effects of both co-digestion and sludge pre-treatment techniques were evaluated in terms of the organic removal efficiency and the biogas production. The "co-digestion" of wastewater sludge with both types of pomaces was revealed to be a much more efficient way for the biogas production compared to the single (mono) sludge digestion. The ultrasonication and microwave pre-treatments applied to the sludge samples caused to a further increase in biogas and methane yields. Based on applied specific energies, ultrasonication pre-treatment was found much more effective than microwave irradiation. The specific energy applied in microwave pre-treatment (87,000kj/kgTS) was almost 9 times higher than that of used in ultrasonication (10,000kj/kgTS), resulting only 10-15% increases in biogas/methane yield. Co-digestion of winery and olive industry residues with pre-treated wastewater sludges appears to be a suitable technique for waste management and energy production. Copyright © 2017 Elsevier B.V. All rights reserved.

Adiabatic perturbations in pre-big bang models: Matching conditions and scale invariance

International Nuclear Information System (INIS)

Durrer, Ruth; Vernizzi, Filippo

2002-01-01

At low energy, the four-dimensional effective action of the ekpyrotic model of the universe is equivalent to a slightly modified version of the pre-big bang model. We discuss cosmological perturbations in these models. In particular we address the issue of matching the perturbations from a collapsing to an expanding phase. We show that, under certain physically motivated and quite generic assumptions on the high energy corrections, one obtains n=0 for the spectrum of scalar perturbations in the original pre-big bang model (with a vanishing potential). With the same assumptions, when an exponential potential for the dilaton is included, a scale invariant spectrum (n=1) of adiabatic scalar perturbations is produced under very generic matching conditions, both in a modified pre-big bang and ekpyrotic scenario. We also derive the resulting spectrum for arbitrary power law scale factors matched to a radiation-dominated era

Reducing ultrafiltration membrane fouling during potable water reuse using pre-ozonation.

Science.gov (United States)

Wang, Hui; Park, Minkyu; Liang, Heng; Wu, Shimin; Lopez, Israel J; Ji, Weikang; Li, Guibai; Snyder, Shane A

2017-11-15

Wastewater reclamation has increasingly become popular to secure potable water supply. Low-pressure membrane processes such as microfiltration (MF) and ultrafiltration (UF) play imperative roles as a barrier of macromolecules for such purpose, but are often limited by membrane fouling. Effluent organic matter (EfOM), including biopolymers and particulates, in secondary wastewater effluents have been known to be major foulants in low-pressure membrane processes. Hence, the primary aim of this study was to investigate the effects of pre-ozonation as a pre-treatment for UF on the membrane fouling caused by EfOM in secondary wastewater effluents for hydrophilic regenerated cellulose (RC) and hydrophobic polyethersulfone (PES) UF membranes. It was found that greater fouling reduction was achieved by pre-ozonation for the hydrophilic RC membrane than the hydrophobic PES membrane at increasing ozone doses. In addition, the physicochemical property changes of EfOM, including biopolymer fractions, by pre-ozonation were systemically investigated. The classical pore blocking model and the extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theories were employed to scrutinize the fouling alleviation mechanism by pre-ozonation. As a result, the overarching mechanisms of fouling reduction were attributed to the following key reasons: (1) Ozone degraded macromolecules such as biopolymers like proteins and polysaccharides into smaller fractions, thereby increasing free energy of cohesion of EfOM and rendering them more hydrophilic and stable; (2) pre-ozonation augmented the interfacial free energy of adhesion between foulants and the RC/PES membranes, leading to the increase of repulsions and/or the decrease of attractions; and (3) pre-ozonation prolonged the transition from pore blocking to cake filtration that was a dominant fouling mechanism, thereby reducing fouling. Copyright © 2017 Elsevier Ltd. All rights reserved.

A study of complex particle emission in the pre-equilibrium statistical model

International Nuclear Information System (INIS)

Miao Rongzhi; Wu Guohua

1986-01-01

A concept of the quasi-composite system in the process of the pre-equilibrium emission is presented in this paper. On the basis of the principle of detailed balance, the existence of the factor, [γ β ω(π β , 0, ν β , 0, E-U)g π,ν ], has been proved with an account of the distinguishabllity between protons and neutrons. A formula for the rate of the complex particle emission in the pre-equilibrium process can be obtained. The theoretical calculation results fit the experimental data quite well, especially in the high energy part of the energy spectrum the agreement are much better than ever before

Pre- and post-season dietary intake, body composition, and performance indices of NCAA division I female soccer players.

Science.gov (United States)

Clark, Mandy; Reed, Debra B; Crouse, Stephen F; Armstrong, Robert B

2003-09-01

Little published data describe the dietary and physiological profiles of intercollegiate female soccer players; therefore, the purpose of this investigation was to report baseline dietary data, anthropometrics, and performance indices of soccer women during rigorous pre-season training (2 sessions/day) and then during the post-competitive season. Members of a NCAA Division I women's soccer squad completed 3-day diet records, anthropometrics, and physical tests, including VO2peak. Average body mass was 62 kg with 16% body fat, and no significant pre to post differences were observed. Total energy, carbohydrate (CHO), protein, and fat intakes were significantly greater during the pre-season. Pre-season energy intake met the DRI for females with an "active" lifestyle (37 kcal/kg). While CHO intake failed to meet minimum recommendations to promote glycogen repletion (7-10 g/kg), protein and fat intakes were above minimum recommendations. Pre- and post-season intakes of several micronutrients were marginal (failed to meet minimum CHO and micronutrient recommendations. Foods higher in protein and fat displaced more CHO-rich and nutrient-dense foods within athletes' energy requirements and satiety limits.

A Review of the Literature on Training Simulators: Translators: Transfer of Training and Simulator Fidelity.

Science.gov (United States)

1984-04-01

Noise is distracting especially in complex tasks that require close attention and concentration (Finkelman 1975). Improper lighting (Tinker 1943...before coping with . the entire systemi. However, the functional fidelity may be affected due to the isolation of a £ articular subsystem. Curry (1981

Investigation of enzyme-sensitive lipid nanoparticles for delivery of siRNA to blood–brain barrier and glioma cells

DEFF Research Database (Denmark)

Bruun, Jonas; Larsen, Trine Bjørnbo; Jølck, Rasmus Irming

2015-01-01

Clinical applications of siRNA for treating disorders in the central nervous system require development of systemic stable, safe, and effective delivery vehicles that are able to cross the impermeable blood–brain barrier (BBB). Engineering nanocarriers with low cellular interaction during systemi...

Dual thinking for scientists

NARCIS (Netherlands)

Scheffer, M.; Bascompte, J.; Bjordam, T.K.; Carpenter, S.R.; Clarke, L.; Folke, C.; Marquet, P.A.; Mazzeo, N.; Meerhoff, M.; Sala, O.; Westley, F.R.

2015-01-01

Recent studies provide compelling evidence for the idea that creative thinking draws upon two kinds of processes linked to distinct physiological features, and stimulated under different conditions. In short, the fast system-I produces intuition whereas the slow and deliberate system-II produces

Improving the sludge disintegration efficiency of sonication by combining with alkalization and thermal pre-treatment methods.

Science.gov (United States)

Şahinkaya, S; Sevimli, M F; Aygün, A

2012-01-01

One of the most serious problems encountered in biological wastewater treatment processes is the production of waste activated sludge (WAS). Sonication, which is an energy-intensive process, is the most powerful sludge pre-treatment method. Due to lack of information about the combined pre-treatment methods of sonication, the combined pre-treatment methods were investigated and it was aimed to improve the disintegration efficiency of sonication by combining sonication with alkalization and thermal pre-treatment methods in this study. The process performances were evaluated based on the quantities of increases in soluble chemical oxygen demand (COD), protein and carbohydrate. The releases of soluble COD, carbohydrate and protein by the combined methods were higher than those by sonication, alkalization and thermal pre-treatment alone. Degrees of sludge disintegration in various options of sonication were in the following descending order: sono-alkalization > sono-thermal pre-treatment > sonication. Therefore, it was determined that combining sonication with alkalization significantly improved the sludge disintegration and decreased the required energy to reach the same yield by sonication. In addition, effects on sludge settleability and dewaterability and kinetic mathematical modelling of pre-treatment performances of these methods were investigated. It was proven that the proposed model accurately predicted the efficiencies of ultrasonic pre-treatment methods.

Dropping the hammer: Examining impact ignition and combustion using pre-stressed aluminum powder

Science.gov (United States)

Hill, Kevin J.; Warzywoda, Juliusz; Pantoya, Michelle L.; Levitas, Valery I.

2017-09-01

Pre-stressing aluminum (Al) particles by annealing and quenching Al powder alters particle mechanical properties and has also been linked to an increase in particle reactivity. Specifically, energy propagation in composites consisting of aluminum mixed with copper oxide (Al + CuO) exhibits a 24% increase in flame speed when using pre-stressed aluminum (PS Al) compared to Al of the same particle size. However, no data exist for the reactivity of PS Al powders under impact loading. In this study, a drop weight impact tester with pressure cell was designed and built to examine impact ignition sensitivity and combustion of PS Al when mixed with CuO. Both micron and nanometer scale powders (i.e., μAl and nAl, respectively) were pre-stressed, then combined with CuO and analyzed. Three types of ignition and combustion events were identified: ignition with complete combustion, ignition with incomplete combustion, and no ignition or combustion. The PS nAl + CuO demonstrated a lower impact ignition energy threshold for complete combustion, differing from nAl + CuO samples by more than 3.5 J/mg. The PS nAl + CuO also demonstrated significantly more complete combustion as evidenced by pressure history data during ignition and combustion. Additional material characterization provides insight on hot spot formation in the incomplete combustion samples. The most probable reasons for higher impact-induced reactivity of pre-stressed particles include (a) delayed but more intense fracture of the pre-stressed alumina shell due to release of energy of internal stresses during fracture and (b) detachment of the shell from the core during impact due to high tensile stresses in the Al core leading to much more pronounced fracture of unsupported shells and easy access of oxygen to the Al core. The μAl + CuO composites did not ignite, even under pre-stressed conditions.

Acute Phase Proteins and their Relation to Energy Metabolites in Dairy Cows during the Pre- and Postpartal Period

Directory of Open Access Journals (Sweden)

Gabriel Kováč

2009-01-01

Full Text Available The objective of this study was to evaluate the concentrations of selected acute phase proteins – haptoglobin (Hp and serum amyloid A (SAA, and selected variables of energy metabolism in blood serum of dairy cows during different stages of the pre- and postpartal period. The analyses were performed in dairy cows of the Slovak spotted breed and its crossbreeds (n = 57. The cows were divided into 9 groups according to the evaluated part of reproduction cycle – from 4 weeks before parturition to 10 weeks after parturition. Significant differences were found in mean Hp and SAA concentrations during the monitored period (P P P P P P P < 0.001. Moreover, significant correlations were found between Hp and non-esterified fatty acids, Hp and β-hydroxybutyrate, as well as between SAA and non-esterified fatty acids. Our results indicate that the acute phase response occurs in cows around parturition, and suggest that there are relationships between mediators of immune response and several indices of energy metabolism. Our results also suggest that in cows with higher concentrations of non-esterified fatty acids, indicating a certain degree of lipid mobilisation, higher values of acute phase proteins may be found.

Improved Simulation of the Pre-equilibrium Triton Emission in Nuclear Reactions Induced by Nucleons

Science.gov (United States)

Konobeyev, A. Yu.; Fischer, U.; Pereslavtsev, P. E.; Blann, M.

2014-04-01

A new approach is proposed for the calculation of non-equilibrium triton energy distributions in nuclear reactions induced by nucleons of intermediate energies. It combines models describing the nucleon pick-up, the coalescence and the triton knock-out processes. Emission and absorption rates for excited particles are represented by the pre-equilibrium hybrid model. The model of Sato, Iwamoto, Harada is used to describe the nucleon pick-up and the coalescence of nucleons from exciton configurations starting from (2p,1h) states. The contribution of the direct nucleon pick-up is described phenomenologically. Multiple pre-equilibrium emission of tritons is accounted for. The calculated triton energy distributions are compared with available experimental data.

Pre-cold stress increases acid stress resistance and induces amino ...

African Journals Online (AJOL)

pre-adapted to cold stress revealed induction of amino acid homeostasis and energy ... substrate, thereby reducing yeast and mould ..... spontaneous mutation of llmg_1816 (gdpp) induced by .... species to UV-B-induced damage in bacteria. J.

Effect of MeV energy He and N pre-implantation on the formation of porous silicon

Energy Technology Data Exchange (ETDEWEB)

Manuaba, A. E-mail: manu@rmki.kfki.hu; Paszti, F.; Ortega, C.; Grosman, A.; Horvath, Z.E.; Szilagyi, E.; Khanh, N.Q.; Vickridge, I

2001-06-01

The effects of MeV energy He and N pre-implantation of Si substrate on the structure of porous silicon formed by anodic etching were studied by measuring the depth profiles of {sup 15}N decorating the pores walls. Radiation damage was recovered by annealing after the implantation. It was found that the He implant accelerates the etching process, probably due to the bubbles or the remaining lattice damage. At a dose of 8x10{sup 16} ions/cm{sup 2} the He containing layer was formed with a significantly enhanced porosity due to the contribution of the large-sized bubbles. At the highest dose of 32.5x10{sup 16} ions/cm{sup 2} flaking took place during the anodic etching. In contrast to He, N stopped the anodic etching at a depth of critical N concentration of {approx}0.9 at.%. For the lowest implantation dose, where the peak concentration was below this limit, the pores propagate through the implanted layer with an enhanced speed.

Effect of macronutrient ratio of the pre-starter diet on broiler performance and intermediary metabolism

OpenAIRE

SWENNEN, Quirine; Everaert, N.; Debonne, M.; Verbaeys, I.; Careghi, C.; Tona, K.; Janssens, G. P. J.; Decuypere, E.; Bruggeman, V.; Buyse, J.

2010-01-01

P>The aim of this study was to investigate the influence of isoenergetic substitution between the three energy delivering macronutrients in pre-starter diets on performance and intermediary nutrient metabolism in broiler chickens. From hatch until 5 days of age, 600 chicks, collected during peak of hatch, were fed one of the three experimental pre-starter diets with isoenergetic (13 MJ metabolisable energy/kg) substitutions between fat (43 vs. 108 g/kg), protein (126 vs. 240 g/kg) and carbohy...

Reliability and Validity Assessment of a Linear Position Transducer

Directory of Open Access Journals (Sweden)

Manuel V. Garnacho-Castaño

2015-03-01

Full Text Available The objectives of the study were to determine the validity and reliability of peak velocity (PV, average velocity (AV, peak power (PP and average power (AP measurements were made using a linear position transducer. Validity was assessed by comparing measurements simultaneously obtained using the Tendo Weightlifting Analyzer Systemi and T-Force Dynamic Measurement Systemr (Ergotech, Murcia, Spain during two resistance exercises, bench press (BP and full back squat (BS, performed by 71 trained male subjects. For the reliability study, a further 32 men completed both lifts using the Tendo Weightlifting Analyzer Systemz in two identical testing sessions one week apart (session 1 vs. session 2. Intraclass correlation coefficients (ICCs indicating the validity of the Tendo Weightlifting Analyzer Systemi were high, with values ranging from 0.853 to 0.989. Systematic biases and random errors were low to moderate for almost all variables, being higher in the case of PP (bias ±157.56 W; error ±131.84 W. Proportional biases were identified for almost all variables. Test-retest reliability was strong with ICCs ranging from 0.922 to 0.988. Reliability results also showed minimal systematic biases and random errors, which were only significant for PP (bias -19.19 W; error ±67.57 W. Only PV recorded in the BS showed no significant proportional bias. The Tendo Weightlifting Analyzer Systemi emerged as a reliable system for measuring movement velocity and estimating power in resistance exercises. The low biases and random errors observed here (mainly AV, AP make this device a useful tool for monitoring resistance training.

Efficiency of the pre-heater against flow rate on primary the beta test loop

International Nuclear Information System (INIS)

Edy Sumarno; Kiswanta; Bambang Heru; Ainur R; Joko P

2013-01-01

Calculation of efficiency of the pre-heater has been carried out against the flow rate on primary the BETA Test Loop. BETA test loop (UUB) is a facilities of experiments to study the thermal hydraulic phenomenon, especially for thermal hydraulic post-LOCA (Lost of Coolant Accident). Sequences removal on the BETA Test Loop contained a pre-heater that serves as a getter heat from the primary side to the secondary side, determination of efficiency is to compare the incoming heat energy with the energy taken out by a secondary fluid. Characterization is intended to determine the performance of a pre-heater, then used as tool for analysis, and as a reference design experiments. Calculation of efficiency methods performed by operating the pre-heater with fluid flow rate variation on the primary side. Calculation of efficiency on the results obtained that the efficiency change with every change of flow rate, the flow rate is 71.26% on 163.50 ml/s and 60.65% on 850.90 ml/s. Efficiency value can be even greater if the pre-heater tank is wrapped with thermal insulation so there is no heat leakage. (author)

Adiabatic CMB perturbations in pre-big bang string cosmology

DEFF Research Database (Denmark)

Enqvist, Kari; Sloth, Martin Snoager

2001-01-01

We consider the pre-big bang scenario with a massive axion field which starts to dominate energy density when oscillating in an instanton-induced potential and subsequently reheats the universe as it decays into photons, thus creating adiabatic CMB perturbations. We find that the fluctuations...

Systemy informatyczne w sterowaniu rolnictwem w regionie

OpenAIRE

Sowa, Grzegorz

1981-01-01

The author has determined factors furnishing the regional steering of agricultural production with special significance. There are outlined main functions of central and regional administration in steering agricultural production. The author underlines responsibility of local organs of administration for overall agricultural production of a given region. The analysis encompasses also the state of the information system in management of private farming from the point of vi...

Health Occupations Module. The Skeletal System--I.

Science.gov (United States)

Temple Univ., Philadelphia, PA. Div. of Vocational Education.

This module on the skeletal system is one of eight modules designed for individualized instruction in health occupations education programs at both the secondary and postsecondary levels. This module contains an introduction to the module topic, three objectives (e.g., define the skeletal system and list its functions), and three learning…

Reproductive and Productive Performance of Iraqi Buffaloes as Influenced by Pre-Mating and Pre-Calving Concentrate Supplementation

Directory of Open Access Journals (Sweden)

Talal Anwer Abdulkareem*, Sawsan Ali Al-Sharifi, Sajeda Mahdi Eidan and R.G. Sasser1

2012-06-01

Full Text Available The objective of the present study was to investigate the influence of pre-mating and pre-calving concentrate supplementation of Iraqi buffaloes on some of the reproductive (estrus, mating, pregnancy and calving rates and productive (daily milk yield and calves birth weight traits. This study was carried out in 4 Iraqi South-central governorates using 596 pre-mating and 628 pregnant buffaloes (during the last two months of gestation. Pre-mating buffaloes were divided randomly into 496 concentrate-supplemented buffaloes (Flushing and 100 control ones. Additionally, pregnant buffaloes were also divided into 528 concentrate- supplemented buffaloes (Steaming up and 100 controls. Each buffalo within the flushing and steaming up groups were fed daily on 7 Kg of concentrate diet (13% crude protein and 1.70 Mcal of net energy for 60 days. The control buffaloes were nourished only on low-quality roughages of the area and wheat bran. Higher estrus (+15%, P<0.01, pregnancy (+23.8%, P<0.05 and calving rates (+30.8%, P<0.01 were observed in concentrate-supplemented buffaloes as compared with controls. An obvious increase in (P<0.05 calving rate (+14.7%, daily milk yield (+44.8% and calf birth weight (+25.6% were noted in steaming up buffaloes in comparison with control buffaloes. Results indicated that improvement in feeding schedule of Iraqi buffaloes during pre-mating and late gestation periods enhanced the reproductive performance and increased milk production of subsequent lactation and calf birth weight. These improvements increased owner income ($174=209,000 Iraqi dinar /buffalo from the sale of meat and milk.

Pre-test evaluation of LLTR series II Test A-7

International Nuclear Information System (INIS)

Knittle, D.

1981-03-01

The purpose of this report is to present pre-test predictions of pressure histories for the A-7 test to be conducted in the Large Leak Test Rig (LLTR) at the Energy Technology Engineering Center (ETEC) in April 1981

Parametric study of x-ray pre-ionizer with plasma cathode

International Nuclear Information System (INIS)

Bollanti, S.; Di Lazzaro, P.; Flora, F.; Giordano, G.; Letardi, T.; Schina, G.; Zheng, C.

1993-01-01

The construction characteristics and the performance of an x-ray diode working at 200 Hz are described. The temporal behavior of both the plasma cathode emission and the diode discharge was studied, including the measurements of vacuum effects on the repetition rate and lifetime capability, pre-ionization versus electrical features, and ionization density versus dosage. This simple and low-cost x-ray diode was used to uniformly pre-ionize a half-liter XeCl laser, delivering an output laser energy of 800 mJ/shot at a 100-Hz repetition rate

Demand-side Energy Policy as an Alternative Energy Strategy for Pakistan

OpenAIRE

PETER PINTZ

1986-01-01

After the first oil-price shock of 1973, a search for new energy policies was started all over the world. Changing one fundamental concept - that relating to the general development of energy supply and consumption - was, however, out of the question. The pre-1973 trend of development was maintained. The energy elasticities did not change. The old forecasts were still held to be valid and were considered now, as earlier, to be the objectives which a successful energy policy had to achieve. Th...

Bats and wind turbines : pre-siting and pre-construction survey protocols

Energy Technology Data Exchange (ETDEWEB)

Lausen, C.; Baerwald, E.; Gruver, J.; Barclay, R. [Calgary Univ., AB (Canada)

2008-05-15

Studies have shown that a number of bats are killed by moving wind turbine blades at wind farms throughout North America. The studies have shown that over 80 per cent of the fatalities involve migratory bat species. Hoary bats, eastern red bats, and silver-haired bats dominate the fatalities during the fall migration period. Fatality rates vary among wind energy developments. Some data suggest that fatalities are higher on nights with lower wind speeds, and increased fatalities have been associated with taller wind turbines. This report outlined pre-construction survey requirements for preventing bat fatalities at wind power plants. A pre-construction survey was recommended to achieve a representative sampling of bat activity and determine the relative risk to bats. The study suggested that monitoring data from locations across the province should be pooled to provide a better understanding of the landscape-scale patterns of bat migration. Monitoring for bats should be conducted continuously due to the sporadic nature of peaks in bat activity, the influence of temperature, moon phase, and weather variables. Sampling techniques for acoustic detection, radar tracking, and mist-netting should be implemented to determine the abundance of susceptible species and the location of migration routes. All existing meteorological towers should be used as sampling stations with bat detectors installed at ground level and near the top of the tower. Additional detector stations should be distributed throughout the wind resource area. Specialized anabat microphones should be calibrated to record bat activity. Acoustic data should be presented as total bat passes and mean passes per night and matched with corresponding meteorological data. It was concluded that pre-construction monitoring data should be gathered and made available for collaborative and cumulative research efforts. 28 refs., 1 fig.

Prologis Rolls Out Warehouse Energy Retrofits

Energy Technology Data Exchange (ETDEWEB)

None

2013-03-01

Prologis partnered with the U.S. Department of Energy (DOE) to develop and implement solutions to retrofit existing buildings to reduce annual energy consumption by at least 30% versus pre-retrofit energy use as part of DOE’s Commercial Building Partnership (CBP) program.

Energy implications of mechanical and mechanical-biological treatment compared to direct waste-to-energy.

Science.gov (United States)

Cimpan, Ciprian; Wenzel, Henrik

2013-07-01

Primary energy savings potential is used to compare five residual municipal solid waste treatment systems, including configurations with mechanical (MT) and mechanical-biological (MBT) pre-treatment, which produce waste-derived fuels (RDF and SRF), biogas and/or recover additional materials for recycling, alongside a system based on conventional mass burn waste-to-energy and ash treatment. To examine the magnitude of potential savings we consider two energy efficiency levels (state-of-the-art and best available technology), the inclusion/exclusion of heat recovery (CHP vs. PP) and three different background end-use energy production systems (coal condensing electricity and natural gas heat, Nordic electricity mix and natural gas heat, and coal CHP energy quality allocation). The systems achieved net primary energy savings in a range between 34 and 140 MJprimary/100 MJinput waste, in the different scenario settings. The energy footprint of transportation needs, pre-treatment and reprocessing of recyclable materials was 3-9.5%, 1-18% and 1-8% respectively, relative to total energy savings. Mass combustion WtE achieved the highest savings in scenarios with CHP production, nonetheless, MBT-based systems had similarly high performance if SRF streams were co-combusted with coal. When RDF and SRF was only used in dedicated WtE plants, MBT-based systems totalled lower savings due to inherent system losses and additional energy costs. In scenarios without heat recovery, the biodrying MBS-based system achieved the highest savings, on the condition of SRF co-combustion. As a sensitivity scenario, alternative utilisation of SRF in cement kilns was modelled. It supported similar or higher net savings for all pre-treatment systems compared to mass combustion WtE, except when WtE CHP was possible in the first two background energy scenarios. Recovery of plastics for recycling before energy recovery increased net energy savings in most scenario variations, over those of full

Energy swaps

International Nuclear Information System (INIS)

Kellett, Jack

1999-01-01

This chapter reviews the range of available energy swap structures giving details of the plain vanilla, differential, margin or crack, participation, double-up, extendable, pre-paid, off-market, and curve-lock and backwardation swaps. The application of energy swaps, end-user benefits and concerns, the structure of the swap market, comparisons with other swap markets, market sectors, and energy swaps in financing structures are described. The role of the intermediary, and future developments are examined. The pricing of a swap and success in the swaps market are discussed

Influence of pre-strain on thermal stability of non-equilibrium microstructures in a low alloy steel

International Nuclear Information System (INIS)

Sun, Chao; Yang, Shanwu; Wang, Xian; Zhang, Rui; He, Xinlai

2013-01-01

Highlights: ► High pre-strain and low pre-strain influence differently on thermal stability of non-equilibrium microstructures. ► High pre-strain, in which dislocation sources can be actuated and dislocation density is increased excessively, will markedly promote recrystallization. ► Low pre-strain, in which dislocations are induced to redistribute into a low-energy structure, can slow down microstructure evolution. -- Abstract: Non-equilibrium microstructures in steels including martensite and bainite, which are main phases in current high strength steels, possess high strength and hardness. However, these microstructures are metastable due to their high density of crystal defects. In the present investigation, hardness test, optical microscopy and electron microscopy have been carried out to detect microstructure evolution in a low alloy steel, which was reheated and held isothermally at 550 °C. Special emphasis was put on influence of pre-strain on thermal stability of non-equilibrium microstructures. It is found that high pre-strain, in which dislocation sources can be actuated and dislocation density is increased excessively, will markedly promote recrystallization of non-equilibrium microstructures at 550 °C, while low pre-strain, in which only can mono-glide of dislocations can be operated in each grain and dislocations are induced to redistribute into a low-energy structure, can slow down microstructure evolution

Analysis of Pre-Retrofit Building and Utility Data

Energy Technology Data Exchange (ETDEWEB)

Prahl, D.; Beach, R.

2014-12-01

IBACOS analyzed pre-retrofit daily utility data to sort homes by energy consumption, allowing for better targeting of homes for physical audits. Following ASHRAE Guideline 14 normalization procedures, electricity consumption of 1,166 all electric production-built homes' was modeled. The homes were in two communities -- one built in the 1970s and the other in the mid-2000s.

Analysis of Pre-Retrofit Building and Utility Data

Energy Technology Data Exchange (ETDEWEB)

Prahl, D. [IBACOS, Inc., Pittsburgh, PA (United States); Beach, R. [IBACOS, Inc., Pittsburgh, PA (United States)

2014-12-01

IBACOS analyzed pre-retrofit daily utility data to sort homes by energy consumption, allowing for better targeting of homes for physical audits. Following ASHRAE Guideline 14 normalization procedures, electricity consumption of 1,166 all electric production-built homes was modeled. The homes were in two communities—one built in the 1970s and the other in the mid-2000s.

Wind Energy and Wildlife Pre- and Post-Construction Project at Pantex Plant

Energy Technology Data Exchange (ETDEWEB)

Matlack, Raymond S. [Texas A & M Univ., College Station, TX (United States)

2018-01-03

From 2009-2017, we conducted pre- and post-construction monitoring of wildlife at the Pantex Plant before and after construction of five wind turbines on the plant in 2014-2015. Pre-construction acoustic monitoring for bats was conducted at five sites on Pantex. Acoustic (here after Anabat) files were downloaded 30 times with Anabat files recorded from 6/21/2010 through 1/17/2014. The resulting data include over 3,000,000 files and we hope to analyze them in the future. We were never successful recording acoustic data after 2014 (post-construction). This is despite numerous attempts to trouble shoot our acoustic monitors. Wind damage to cables going from the body of the monitor to their microphones could not be repaired or replaced while towers were standing. Sampling of breeding birds was accomplished through point counts conducted at sites selected for turbine construction and others selected as control sites. Precipitation varied greatly over the course of the study, from a low of 17.81 cm (7.01 inches) during 2011 to a high of 87.96 cm (34.63 inches) during 2015. The pre-construction portion of the project was characterized by fairly extreme drought starting in 2011. Total precipitation for 2011 and 2012 was just 49.12 cm (19.34 inches), less than 50% of the average for a two-year period. The impact of this drought on nesting grassland birds manifest as low nesting species richness and abundance. In 2011 and 2012, 20 and 17 species were documented during point counts, respectively. Post-construction sampling followed the wet year of 2015 (87.96 cm, 34.63 inches). Species richness of nesting birds in 2016 and 2017 was considerably higher than during the drought, 40 and 37 species, respectively. We suspect changes in resource availability associated with relief from drought starting after 2015 was responsible for the recovery/increase in species detected during the breeding season; less importantly any changes from installation of turbines or changes in surface

Pre-symptomatic increase in urine-orosomucoid excretion in pre-eclamptic women

DEFF Research Database (Denmark)

Kronborg, Camilla Skovhus; Allen, Jim; Vittinghus, Erik

2007-01-01

, 32 women developed pre-eclampsia, and 5 controls for every case of pre-eclampsia were found. Blood samples were collected 4 times and urine samples 6 times from the 18/19th week and throughout pregnancy. Orosomucoid and albumin in plasma were analysed by standard methods, and in urine by sandwich...... in orosomucoid. In the plasma samples, orosomucoid was significantly higher late in pre-eclamptic pregnancies (>or=36th week, p=0.0275). CONCLUSIONS: Pre-eclampsia is associated with a pre-symptomatic increase in the urine excretion of orosomucoid, and orosomucoid excretion precedes that of albumin. Orosomucoid...... excretion can probably be used as a prognostic tool in combination with other screening methods, and seems to be a more sensitive marker for evolving pre-eclampsia than albumin. Plasma orosomucoid is significantly increased late in pre-eclampsia. Thus, the increased excretion of orosomucoid must primarily...

Relationship between enamel bond fatigue durability and surface free-energy characteristics with universal adhesives.

Science.gov (United States)

Nagura, Yuko; Tsujimoto, Akimasa; Barkmeier, Wayne W; Watanabe, Hidehiko; Johnson, William W; Takamizawa, Toshiki; Latta, Mark A; Miyazaki, Masashi

2018-04-01

The relationship between enamel bond fatigue durability and surface free-energy characteristics with universal adhesives was investigated. The initial shear bond strengths and shear fatigue strengths of five universal adhesives to enamel were determined with and without phosphoric acid pre-etching. The surface free-energy characteristics of adhesive-treated enamel with and without pre-etching were also determined. The initial shear bond strength and shear fatigue strength of universal adhesive to pre-etched enamel were higher than those to ground enamel. The initial shear bond strength and shear fatigue strength of universal adhesive to pre-etched enamel were material dependent, unlike those to ground enamel. The surface free-energy of the solid (γ S ) and the hydrogen-bonding force (γSh) of universal adhesive-treated enamel were different depending on the adhesive, regardless of the presence or absence of pre-etching. The bond fatigue durability of universal adhesives was higher to pre-etched enamel than to ground enamel. In addition, the bond fatigue durability to pre-etched enamel was material dependent, unlike that to ground enamel. The surface free-energy characteristics of universal adhesive-treated enamel were influenced by the adhesive type, regardless of the presence or absence of pre-etching. The surface free-energy characteristics of universal adhesive-treated enamel were related to the results of the bond fatigue durability. © 2018 Eur J Oral Sci.

Waste Oils pre-Esterification for Biodiesel Synthesis: Effect of Feed Moisture Contents

OpenAIRE

Kalala Jalama

2012-01-01

A process flowsheet was developed in ChemCad 6.4 to study the effect of feed moisture contents on the pre-esterification of waste oils. Waste oils were modelled as a mixture of triolein (90%), oleic acid (5%) and water (5%). The process mainly consisted of feed drying, pre-esterification reaction and methanol recovery. The results showed that the process energy requirements would be minimized when higher degrees of feed drying and higher preesterification reaction tempera...

Group Home Energy Efficiency Retrofit for 30% Energy Savings: Washington, D.C. (Fact Sheet)

Energy Technology Data Exchange (ETDEWEB)

None, None

2013-11-01

Energy efficiency retrofits (EERs) face many challenges on the path to scalability. Limited budgets, cost effectiveness, risk factors, and accessibility impact the type and the extent of measures that can be implemented feasibly to achieve energy savings goals. Group home retrofits can face additional challenges than those in single family homes - such as reduced access (occupant-in-place restrictions) and lack of incentives for occupant behavioral change. This project studies the specification, implementation, and energy savings from an EER in a group home, with an energy savings goal of 30%. This short term test report chronicles the retrofit measures specified, their projected cost-effectiveness using building energy simulations, and the short term test results that were used to characterize pre-retrofit and post-retrofit conditions. Additionally, the final report for the project will include analysis of pre- and post-retrofit performance data on whole building energy use, and an assessment of the energy impact of occupant interface with the building (i.e., window operation). Ultimately, the study's results will be used to identify cost effective EER measures that can be implemented in group homes, given constraints that are characteristic of these buildings. Results will also point towards opportunities for future energy savings.

Improving energy audit process and report outcomes through planning initiatives

Science.gov (United States)

Sprau Coulter, Tabitha L.

Energy audits and energy models are an important aspect of the retrofit design process, as they provide project teams with an opportunity to evaluate a facilities current building systems' and energy performance. The information collected during an energy audit is typically used to develop an energy model and an energy audit report that are both used to assist in making decisions about the design and implementation of energy conservation measures in a facility. The current lack of energy auditing standards results in a high degree of variability in energy audit outcomes depending on the individual performing the audit. The research presented is based on the conviction that performing an energy audit and producing a value adding energy model for retrofit buildings can benefit from a revised approach. The research was divided into four phases, with the initial three phases consisting of: 1.) process mapping activity - aimed at reducing variability in the energy auditing and energy modeling process. 2.) survey analysis -- To examine the misalignment between how industry members use the top energy modeling tools compared to their intended use as defined by software representatives. 3.) sensitivity analysis -- analysis of the affect key energy modeling inputs are having on energy modeling analysis results. The initial three phases helped define the need for an improved energy audit approach that better aligns data collection with facility owners' needs and priorities. The initial three phases also assisted in the development of a multi-criteria decision support tool that incorporates a House of Quality approach to guide a pre-audit planning activity. For the fourth and final research phase explored the impacts and evaluation methods of a pre-audit planning activity using two comparative energy audits as case studies. In each case, an energy audit professionals was asked to complete an audit using their traditional methods along with an audit which involved them first

Theory and experimental evidence of phonon domains and their roles in pre-martensitic phenomena

Science.gov (United States)

Jin, Yongmei M.; Wang, Yu U.; Ren, Yang

2015-12-01

Pre-martensitic phenomena, also called martensite precursor effects, have been known for decades while yet remain outstanding issues. This paper addresses pre-martensitic phenomena from new theoretical and experimental perspectives. A statistical mechanics-based Grüneisen-type phonon theory is developed. On the basis of deformation-dependent incompletely softened low-energy phonons, the theory predicts a lattice instability and pre-martensitic transition into elastic-phonon domains via 'phonon spinodal decomposition.' The phase transition lifts phonon degeneracy in cubic crystal and has a nature of phonon pseudo-Jahn-Teller lattice instability. The theory and notion of phonon domains consistently explain the ubiquitous pre-martensitic anomalies as natural consequences of incomplete phonon softening. The phonon domains are characterised by broken dynamic symmetry of lattice vibrations and deform through internal phonon relaxation in response to stress (a particular case of Le Chatelier's principle), leading to previously unexplored new domain phenomenon. Experimental evidence of phonon domains is obtained by in situ three-dimensional phonon diffuse scattering and Bragg reflection using high-energy synchrotron X-ray single-crystal diffraction, which observes exotic domain phenomenon fundamentally different from usual ferroelastic domain switching phenomenon. In light of the theory and experimental evidence of phonon domains and their roles in pre-martensitic phenomena, currently existing alternative opinions on martensitic precursor phenomena are revisited.

Advanced CANDU reactor pre-licensing progress

International Nuclear Information System (INIS)

Popov, N.K.; West, J.; Snell, V.G.; Ion, R.; Archinoff, G.; Xu, C.

2005-01-01

The Advanced CANDU Reactor (ACR) is an evolutionary advancement of the current CANDU 6 reactor, aimed at producing electrical power for a capital cost and at a unit-energy cost significantly less than that of the current reactor designs. The Canadian Nuclear Safety Commission (CNSC) staff are currently reviewing the ACR design to determine whether, in their opinion, there are any fundamental barriers that would prevent the licensing of the design in Canada. This CNSC licensability review will not constitute a licence, but is expected to reduce regulatory risk. The CNSC pre-licensing review started in September 2003, and was focused on identifying topics and issues for ACR-700 that will require a more detailed review. CNSC staff reviewed about 120 reports, and issued to AECL 65 packages of questions and comments. Currently CNSC staff is reviewing AECL responses to all packages of comments. AECL has recently refocused the design efforts to the ACR-1000, which is a larger version of the ACR design. During the remainder of the pre-licensing review, the CNSC review will be focused on the ACR-1000. AECL Technologies Inc. (AECLT), a wholly-owned US subsidiary of AECL, is engaged in a pre-application process for the ACR-700 with the US Nuclear Regulatory Commission (USNRC) to identify and resolve major issues prior to entering a formal process to obtain standard design certification. To date, the USNRC has produced a Pre-Application Safety Assessment Report (PASAR), which contains their reviews of key focus topics. During the remainder of the pre-application phase, AECLT will address the issues identified in the PASAR. Pursuant to the bilateral agreement between AECL and the Chinese nuclear regulator, the National Nuclear Safety Administration (NNSA) and its Nuclear Safety Center (NSC), NNSA/NSC are reviewing the ACR in seven focus areas. The review started in September 2004, and will take three years. The main objective of the review is to determine how the ACR complies

Energy implications of mechanical and mechanical–biological treatment compared to direct waste-to-energy

International Nuclear Information System (INIS)

Cimpan, Ciprian; Wenzel, Henrik

2013-01-01

Highlights: • Compared systems achieve primary energy savings between 34 and 140 MJ primary /100 MJ input waste. • Savings magnitude is foremost determined by chosen primary energy and materials production. • Energy consumption and process losses can be upset by increased technology efficiency. • Material recovery accounts for significant shares of primary energy savings. • Direct waste-to-energy is highly efficient if cogeneration (CHP) is possible. - Abstract: Primary energy savings potential is used to compare five residual municipal solid waste treatment systems, including configurations with mechanical (MT) and mechanical–biological (MBT) pre-treatment, which produce waste-derived fuels (RDF and SRF), biogas and/or recover additional materials for recycling, alongside a system based on conventional mass burn waste-to-energy and ash treatment. To examine the magnitude of potential savings we consider two energy efficiency levels (state-of-the-art and best available technology), the inclusion/exclusion of heat recovery (CHP vs. PP) and three different background end-use energy production systems (coal condensing electricity and natural gas heat, Nordic electricity mix and natural gas heat, and coal CHP energy quality allocation). The systems achieved net primary energy savings in a range between 34 and 140 MJ primary /100 MJ input waste , in the different scenario settings. The energy footprint of transportation needs, pre-treatment and reprocessing of recyclable materials was 3–9.5%, 1–18% and 1–8% respectively, relative to total energy savings. Mass combustion WtE achieved the highest savings in scenarios with CHP production, nonetheless, MBT-based systems had similarly high performance if SRF streams were co-combusted with coal. When RDF and SRF was only used in dedicated WtE plants, MBT-based systems totalled lower savings due to inherent system losses and additional energy costs. In scenarios without heat recovery, the biodrying MBS

Energy implications of mechanical and mechanical–biological treatment compared to direct waste-to-energy

Energy Technology Data Exchange (ETDEWEB)

Cimpan, Ciprian, E-mail: cic@kbm.sdu.dk; Wenzel, Henrik

2013-07-15

Highlights: • Compared systems achieve primary energy savings between 34 and 140 MJ{sub primary}/100 MJ{sub input} {sub waste.} • Savings magnitude is foremost determined by chosen primary energy and materials production. • Energy consumption and process losses can be upset by increased technology efficiency. • Material recovery accounts for significant shares of primary energy savings. • Direct waste-to-energy is highly efficient if cogeneration (CHP) is possible. - Abstract: Primary energy savings potential is used to compare five residual municipal solid waste treatment systems, including configurations with mechanical (MT) and mechanical–biological (MBT) pre-treatment, which produce waste-derived fuels (RDF and SRF), biogas and/or recover additional materials for recycling, alongside a system based on conventional mass burn waste-to-energy and ash treatment. To examine the magnitude of potential savings we consider two energy efficiency levels (state-of-the-art and best available technology), the inclusion/exclusion of heat recovery (CHP vs. PP) and three different background end-use energy production systems (coal condensing electricity and natural gas heat, Nordic electricity mix and natural gas heat, and coal CHP energy quality allocation). The systems achieved net primary energy savings in a range between 34 and 140 MJ{sub primary}/100 MJ{sub input} {sub waste}, in the different scenario settings. The energy footprint of transportation needs, pre-treatment and reprocessing of recyclable materials was 3–9.5%, 1–18% and 1–8% respectively, relative to total energy savings. Mass combustion WtE achieved the highest savings in scenarios with CHP production, nonetheless, MBT-based systems had similarly high performance if SRF streams were co-combusted with coal. When RDF and SRF was only used in dedicated WtE plants, MBT-based systems totalled lower savings due to inherent system losses and additional energy costs. In scenarios without heat

Effect of pre-heating on the thermal decomposition kinetics of cotton

Science.gov (United States)

The effect of pre-heating at low temperatures (160-280°C) on the thermal decomposition kinetics of scoured cotton fabrics was investigated by thermogravimetric analysis under nonisothermal conditions. Isoconversional methods were used to calculate the activation energies for the pyrolysis after one-...

Pakistan energy consumption scenario and some alternate energy option

International Nuclear Information System (INIS)

Maher, M.J.

1997-01-01

Pakistan with its energy-deficient resources is highly dependent on import-oriented energy affected the economy because of repeated energy price hike on international horizon. The energy consumption pattern in Pakistan comprises about two-third in commercial energy and one-third in non-commercial forms. Most of the country's energy requirements are met by oil, gas hydro power, coal, nuclear energy and thermal power. Pakistan meets it's commercial energy requirements indigenously up to 64%. The balance of deficit of 35-40% is met through import. The consumption of various agro-residues and wood as fuel also plays a vital role. The analysis shows that emphasis needs to be placed on new and renewable resources of energy besides adopting technologies for energy conservation. Renewable energy depends on energy income and constitutes the development process. The are several renewable energy options such as biogas technology, micro-hydro power generation, direct solar energy and biomass energy conservation etc. By improving the conservation techniques as designs of solar converters, pre treating the biomass fuel, increasing the effectiveness of carbonization and pyrolysis increases the energy production. (A.B.)

Energy problems in a global view

International Nuclear Information System (INIS)

Dubois, J.-E.

1976-01-01

Energy problems in general are examined, considering first the ecosystem of pre-Newtonian societies, then that of industrial societies and their resulting energy consumptions. Primary energy sources are listed and the manner in which they are used is described. New techniques (uranium isotope separation, energy conversion, solar energy, controlled fusion) are discussed as a function of their potential saving in energy expenditure. Solutions are proposed for the future of post-industrial societies [fr

Pre-equilibrium particle decay in the photonuclear reactions

International Nuclear Information System (INIS)

Wu, J.R.; Chang, C.C.

1976-11-01

Calculations of particle energy spectra resulting from the photonuclear reactions at energies below the meson production threshold have been carried out in the framework of combining the pre-equilibrium exiton model and the quasi-deuteron model. A 2p-2h initial state in the exciton model is assumed because in the energy region above giant resonance the quasi-deuteron absorption is the dominant process. With these combined models, the subsequent secondary interactions of the emerging particle with the rest of the nucleus following the initial photon-nucleus interaction are appropriately taken into account. The experimental difference energy spectra of fast photoneutrons from several elements (Al, Cu, In, Sn, Ta, Pb, Bi and U) at bremsstrahlung energies of 55 and 85 MeV and the photoproton energy spectra from 12 C at bremsstrahlung energy 110 MeV were compared with the theoretical predictions. General agreements in both spectral shapes and cross sections are obtained. The relative yields of the reactions (γ, xn) resulting from monoenergetic photons on 127 I at 50, 100 and 150 MeV are also predicted reasonably well by the combined models together with the conventional evaporation theory

a Novel Method for Improving Plasma Nitriding Efficiency: Pre-Magnetization by DC Magnetic Field

Science.gov (United States)

Kovaci, Halim; Yetim, Ali Fatih; Bozkurt, Yusuf Burak; Çelik, Ayhan

2017-06-01

In this study, a novel pre-magnetization process, which enables easy diffusion of nitrogen, was used to enhance plasma nitriding efficiency. Firstly, magnetic fields with intensities of 1500G and 2500G were applied to the untreated samples before nitriding. After the pre-magnetization, the untreated and pre-magnetized samples were plasma nitrided for 4h in a gas mixture of 50% N2-50% H2 at 500∘C and 600∘C. The structural, mechanical and morphological properties of samples were examined by X-ray diffraction (XRD), scanning electron microscopy (SEM), microhardness tester and surface tension meter. It was observed that pre-magnetization increased the surface energy of the samples. Therefore, both compound and diffusion layer thicknesses increased with pre-magnetization process before nitriding treatment. As modified layer thickness increased, higher surface hardness values were obtained.

Regional energy-environmental planning

International Nuclear Information System (INIS)

Colavecchio, Antonio

2007-01-01

In consideration of the relationship existing between energy and environment, it's clear that tools are needed to reach a pre-emptive convergence of different interests coming from the management of these sectors. The main tool to realize the above-mentioned convergence of interests in the Regional Energy and Environment Plan (PEAR). The plan allows italian Regions to schedule and to address energy measures in their own area and to regulate Local entities functions [it

WRF Mesoscale Pre-Run for the Wind Atlas of Mexico

DEFF Research Database (Denmark)

Hahmann, Andrea N.; Pena Diaz, Alfredo; Hansen, Jens Carsten

This report documents the work performed by DTU Wind Energy for the project “Atlas Eólico Mexicano” or the Wind Atlas of Mexico. This document reports on the methods used in “Pre-run” of the windmapping project for Mexico. The interim mesoscale modeling results were calculated from the output...

Assessment of the behavior of reinforced concrete beams retrofitted with pre-stressed CFPR subjected to cyclic loading

Science.gov (United States)

Hojatkashani, Ata; Zanjani, Sara

2018-03-01

Rehabilitation of weak and damaged structures has been considered widely during recent years. A relatively modern way of strengthening concrete components is to confine parts under tension and shear by means of carbon fiber reinforce polymer (CFRP). This way of strengthening due to the conditions of composite materials such as light weight, linear elastic behavior until failure point, high tensile strength, high elastic modulus, resistance against corrosion, and high fatigue resistance has become so common. During structural strengthening by means of not pre-stressed FRP materials, usually, it is not possible to benefit from the maximum capacity of FRP materials. In addition, sometimes, the expensive cost of such materials will not make a suitable balance between rates of strengthening and consuming spending. Thus, pre-stressing CFRP materials has an undeniable role in the effective use of materials. In the current research, general procedure of simulation using finite-element method (FEM) by means of the numerical package ABAQUS has been presented. In this article, 12 reinforced concrete (RC) models in two states (strengthened with simple and pre-stressed CFRP) under cycling loading have been considered. A parametric study has been carried out in this research on the effects of parameters such as CFRP surface area, percentage of tensile steel rebar and pre-stressing stress on ultimate load carrying capacity (ULCC), stiffness, and the ability of depreciation energy for the samples. In the current article also, for design parameters, percentages of tensile steel rebars, surface area of CFPR sheets, and the effective pre-stressing stress in RC beams retrofitted with pre-stressed CFPR sheets have investigated. In this paper, it was investigated that using different amount of parameters such as steel rebar percentage, CFRP surface area percentage, and CFRP pre-stressing, the resulted ULCC and energy depreciation of the specimens was observed to be increasing and

Kinetic and collision process effects on magnetic structures in pre-disruption phase of tokamak plasmas

Energy Technology Data Exchange (ETDEWEB)

Farshi, Esmaeil [Kyushu Univ., Advanced Energy Engineering Sciences, Kasuga, Fukuoka (Japan); Goudarzi, Shervin [AEOI, Plasma Physics Department, Tehran (Iran); Amrollahi, Reza [K-N Toosi Univ. of Technology, Tehran (Iran); Sato, Kohnosuke [Kyushu Univ., Research Institute for Applied Mechanics, Kasuga, Fukuoka (Japan)

2001-07-01

Oscillations of the parallel and perpendicular neutral fluxes that are observed during pre-disruption stage in recent experiments, show possibility of a structure in pre-disruption phase of tokamak plasmas. This structure oscillates simultaneously with the m=2 mode until the damping of this mode. The perpendicular component of this structure is greater than the parallel one. From other side, there are a good correlation between MHD activity and behavior of charge exchange neutrals, and an enough good correlation between time behavior of charge exchange flux with high energy and OV line radiation in pre-disruption phase. These may witness possibility of a mechanism of losses-excitation of inner transition with help of heavy particles in pre-disruption phase. This mechanism plays an important role in magnetic structures in pre-disruption phase. (author)

Kinetic and collision process effects on magnetic structures in pre-disruption phase of tokamak plasmas

International Nuclear Information System (INIS)

Farshi, Esmaeil; Goudarzi, Shervin; Amrollahi, Reza; Sato, Kohnosuke

2001-01-01

Oscillations of the parallel and perpendicular neutral fluxes that are observed during pre-disruption stage in recent experiments, show possibility of a structure in pre-disruption phase of tokamak plasmas. This structure oscillates simultaneously with the m=2 mode until the damping of this mode. The perpendicular component of this structure is greater than the parallel one. From other side, there are a good correlation between MHD activity and behavior of charge exchange neutrals, and an enough good correlation between time behavior of charge exchange flux with high energy and OV line radiation in pre-disruption phase. These may witness possibility of a mechanism of losses-excitation of inner transition with help of heavy particles in pre-disruption phase. This mechanism plays an important role in magnetic structures in pre-disruption phase. (author)

Agua Caliente Solar Feasibility and Pre-Development Study Final Report

Energy Technology Data Exchange (ETDEWEB)

Carolyn T. Stewart, Managing Partner; Red Mountain Energy Partners

2011-04-26

Evaluation of facility- and commercial-scale solar energy projects on the Agua Caliente Band of Cahuilla Indians Reservation in Palm Springs, CA. The Agua Caliente Band of Cahuilla Indians (ACBCI) conducted a feasibility and pre-development study of potential solar projects on its lands in southern California. As described below, this study as a logical and necessary next step for ACBCI. Support for solar project development in California, provided through the statewide California Solar Initiative (CSI), its Renewable Portfolio Standard and Feed-in Tariff Program, and recently announced Reverse Auction Mechanism, provide unprecedented support and incentives that can be utilized by customers of California's investor-owned utilities. Department of Energy (DOE) Tribal Energy Program funding allowed ACBCI to complete its next logical step to implement its Strategic Energy Plan, consistent with its energy and sustainability goals.

Development of Mitsubishi--Lurgi fluidized bd incinerator with pre-drying hearths

Energy Technology Data Exchange (ETDEWEB)

Hori, Y; Senshu, A; Mishima, K; Sato, T; Honda, H

1979-02-01

For a better disposal of a steadily increasing volume of sludges with energy conservation it is essential to develop an effective and energy-saving incinerator. The fluidized bed incinerator now widely used for the disposal of sludges has many superior features as compared with the conventional vertical multiple-hearth incinerator, but, on the other hand, has a defect, that is, a large fuel consumption. This is due to the fact that the fluidized bed incinerator has generally low drying efficiency notwithstanding its excellent burning characteristics with minimum excess air. The feasibility of fuel saving by installing sludge pre-drying hearths and an exhaust gas recirculation system additionally on the conventional fluidized bed incinerator and conducted incineration tests on various kinds of sludges, using a 1500 kg/h pilot plant equipped with the incinerator is examined. As the result, the Mitsubishi--Lurgi fluidized bed incinerator with high efficiency multiple pre-drying hearths which consumes less fuel was developed. Part of the incineration test results are presented.

A magnesium-induced triplex pre-organizes the SAM-II riboswitch.

Directory of Open Access Journals (Sweden)

Susmita Roy

2017-03-01

Full Text Available Our 13C- and 1H-chemical exchange saturation transfer (CEST experiments previously revealed a dynamic exchange between partially closed and open conformations of the SAM-II riboswitch in the absence of ligand. Here, all-atom structure-based molecular simulations, with the electrostatic effects of Manning counter-ion condensation and explicit magnesium ions are employed to calculate the folding free energy landscape of the SAM-II riboswitch. We use this analysis to predict that magnesium ions remodel the landscape, shifting the equilibrium away from the extended, partially unfolded state towards a compact, pre-organized conformation that resembles the ligand-bound state. Our CEST and SAXS experiments, at different magnesium ion concentrations, quantitatively confirm our simulation results, demonstrating that magnesium ions induce collapse and pre-organization. Agreement between theory and experiment bolsters microscopic interpretation of our simulations, which shows that triplex formation between helix P2b and loop L1 is highly sensitive to magnesium and plays a key role in pre-organization. Pre-organization of the SAM-II riboswitch allows rapid detection of ligand with high selectivity, which is important for biological function.

Abstracts of the Annual Meeting of the Society of Engineering Science, Incorporated (20th) Held at Newark, Delaware on August 22, 23 and 24, 1983.

Science.gov (United States)

1983-09-01

vitro flow visualization system for observing the left ventricular flow patterns generated by prosthetic mitral valves has been developed. The system...ials science and applied mathematics. Multiple sessions have been or- ganized on phase transitions, biomechanics, heat transfer, geomechanics, fracture ... Fracture Mechanics ..................... 123 FR-2 Contact Problems with Friction ........................... 133 FR-3 Lubricated Contact Problems

Aristotelian pre-Socratics, A glance at Aristotle's Narrative from pre-Socratics

Directory of Open Access Journals (Sweden)

Mehdi Qavam Safari

2015-02-01

Full Text Available In this article, it's tried to study Aristotle's narrative of  pre-Socratics on the base of Aristotle's texts and mainly using  metaphysics, physics, genesis and decadence books. It is also tried to show how Aristotle has interpreted all the pre-Socratics in one way and on the base of his own philosophy framework. He interprets pre-Socratic Arche as an element that means comprehensive matter which is nothing itself, but everything is combination of it and even considers that as substance and the other things as accident. He interprets the distinction of Arche and other things on the basis of this contrast in his philosophy. Aristotle, also analyzes pre-Socratics' viewpoint to change on the base of his distinction among change, genesis and corruption. All these cases show that Aristotle has interpreted the pre-Socratics on the basis of his thought, as Aristotelians. On this basis, since Aristotle's thoughts are the first and the most important sources of pre-Socratic philosophy, Aristotle's role should be considered in studies.

Do we need an energy policy?

International Nuclear Information System (INIS)

Greenhalgh, Geoffrey.

1992-01-01

The debate on the two alternatives of planning or the free operation of market forces as a means of securing the nation's energy supply is of obvious political interest in this pre-election period in the United Kingdom. In UK Energy Policy Post Privatisation, the study reported here, the authors argue for an energy policy that is environment driven. (author)

Effects of hot water pre-extraction on surface properties of bagasse soda pulp.

Science.gov (United States)

Cordeiro, Nereida; Ashori, Alireza; Hamzeh, Yahya; Faria, Marisa

2013-03-01

In this work, the effects of hot water pre-extraction of depithed bagasse on the soda pulping and surface properties were studied. The conditions of hot water pre-extraction were: maximum temperature 170 °C, heat-up time 90 min, time at maximum temperature 10 min, and solid to liquor ratio (S:L) 1:8. Consequently, the pre-extracted and un-extracted bagasse chips were subjected to soda pulping at 160 °C for 1h with 11, 14 and 17% active alkali charge and an S:L of 1:5. The results showed that the hot water pre-extraction increased bagasse surface texture porosity by hemicellulose degradation. Therefore, the delignification was faster for pulping of pre-extracted samples. At a certain charge of alkali, pre-extracted samples showed higher screened yield and lower Kappa number. For instance, at 17% alkali charge, pre-extracted bagasse gave 11.3% higher pulp yield compared with the un-extracted ones. Inverse gas chromatography (IGC) results showed that the hot water pre-extraction changed the active sites on the bagasse surface, decreasing the dispersive energy and the basicity character, and affected the particle morphology. The pulping process decreased the hydrophobicity and the basicity of the bagasse surface. The surfaces of un-extracted and pre-extracted bagasse pulps had similar properties but different morphology. The pulps present higher surface area and permeability with more reactive capacity. Copyright © 2012 Elsevier B.V. All rights reserved.

Pre-feasibility analysis of wind energy for Inuvialuit region in Northwest Territories

International Nuclear Information System (INIS)

Chauhan, B.; Weis, T.; Pinard, J.P.

2003-03-01

A study examining opportunities and barriers for wind energy development in 4 communities in the Northwest Territories was presented. A review of previous studies examining the feasibility of wind energy in this region was also provided, as well as technical and socio-economic analyses on the displacement of diesel fuels by wind energy. Details of site visits and public meetings to discuss energy concerns were included. Four key locations for installing wind monitoring stations were determined. Interconnection issues and opportunities for wind energy into the local power grids were discussed. Geographic features of the various communities, as well as energy consumption details and wind climates were described. It was noted that there are special considerations for wind turbines in the North, and issues concerning icing and anti-icing technologies were examined. It was suggested that medium-scale wind turbines were the most appropriate size for the Inuvialuit region, due to low costs and ease of installation and redundancy. RETScreen software was used to develop an economic overview of the opportunities for wind energy systems in the 4 communities. Historical wind speed data collected at airports by Environment Canada was used in this analysis. Low and high penetration systems were evaluated. Results of the analysis indicated that wind generated electricity does not appear to be economically viable when compared solely to the displaced cost of diesel fuel. However, environmental factors make it a viable technology. It was concluded that there is potential for wind energy developments in the region, provided that sites are carefully selected. Cost estimates for the proposed wind-monitoring program were also included. 13 tabs., 15 figs

Effect of thermal, chemical and thermo-chemical pre-treatments to enhance methane production

Energy Technology Data Exchange (ETDEWEB)

Rafique, Rashad; Nizami, Abdul-Sattar; Murphy, Jerry D.; Kiely, Gerard [Department of Civil and Environmental Engineering, University College Cork (Ireland); Poulsen, Tjalfe Gorm [Department of Biotechnology, Chemistry and Environmental Engineering, Aalborg University (Denmark); Asam, Zaki-ul-Zaman [Department of Civil Engineering, National University of Ireland Galway (Ireland)

2010-12-15

The rise in oil price triggered the exploration and enhancement of various renewable energy sources. Producing biogas from organic waste is not only providing a clean sustainable indigenous fuel to the number of on-farm digesters in Europe, but also reducing the ecological and environmental deterioration. The lignocellulosic substrates are not completely biodegraded in anaerobic digesters operating at commercial scale due to their complex physical and chemical structure, which result in meager energy recovery in terms of methane yield. The focus of this study is to investigate the effect of pre-treatments: thermal, thermo-chemical and chemical pre-treatments on the biogas and methane potential of dewatered pig manure. A laboratory scale batch digester is used for these pre-treatments at different temperature range (25 C-150 C). Results showed that thermo-chemical pretreatment has high effect on biogas and methane potential in the temperature range (25-100 C). Maximum enhancement is observed at 70 C with increase of 78% biogas and 60% methane production. Thermal pretreatment also showed enhancement in the temperature range (50-10 C), with maximum enhancement at 100 C having 28% biogas and 25% methane increase. (author)

Pre-equilibrium effects in (n,2n) cross sections at 14.5 MeV

International Nuclear Information System (INIS)

Gupta, S.K.; Chatterjee, Ambar

The Griffin-Williams exciton model is used to calculate the pre-equilibrium contribution to the (n,2n) reaction around 14.5 MeV neutron energy for nuclei throughout the periodic table. The experimental cross sections for 60< A<209 are explained with an r.m.s. deviation of 0.31 by including a statistical evaporation and a pre-equilibrium component taking into account the competing proton emission. For A<60 the data is not reproduced very well. (auth.)

The new double energy-velocity spectrometer VERDI

Science.gov (United States)

Jansson, Kaj; Frégeau, Marc Olivier; Al-Adili, Ali; Göök, Alf; Gustavsson, Cecilia; Hambsch, Franz-Josef; Oberstedt, Stephan; Pomp, Stephan

2017-09-01

VERDI (VElocity foR Direct particle Identification) is a fission-fragment spectrometer recently put into operation at JRC-Geel. It allows measuring the kinetic energy and velocity of both fission fragments simultaneously. The velocity provides information about the pre-neutron mass of each fission fragment when isotropic prompt-neutron emission from the fragments is assumed. The kinetic energy, in combination with the velocity, provides the post-neutron mass. From the difference between pre- and post-neutron masses, the number of neutrons emitted by each fragment can be determined. Multiplicity as a function of fragment mass and total kinetic energy is one important ingredient, essential for understanding the sharing of excitation energy between fission fragments at scission, and may be used to benchmark nuclear de-excitation models. The VERDI spectrometer design is a compromise between geometrical efficiency and mass resolution. The spectrometer consists of an electron detector located close to the target and two arrays of silicon detectors, each located 50 cm away from the target. In the present configuration pre-neutron and post-neutron mass distributions are in good agreement with reference data were obtained. Our latest measurements performed with spontaneously fissioning 252Cf is presented along with the developed calibration procedure to obtain pulse height defect and plasma delay time corrections.

Holistic Energy Renovation of Pre- and Postwar Apartment Blocks in Denmark

DEFF Research Database (Denmark)

Eriksen, Marlene Stenberg Hagen; Rode, Carsten; Bjarløv, Søren Peter

of today. This paper presents the Danish research project Holistic Energy Renovation, which aims at performing a holistic energy renovation of two case buildings. As part of the project nine parameters for a holistic renovation have been defined, a method for developing and assessing a holistic building...... of the assessment method and an evaluation of how the holistic perspective has influenced the project process and product development....

Surface pre-treatment for barrier coatings on polyethylene terephthalate

Science.gov (United States)

Bahre, H.; Bahroun, K.; Behm, H.; Steves, S.; Awakowicz, P.; Böke, M.; Hopmann, Ch; Winter, J.

2013-02-01

Polymers have favourable properties such as light weight, flexibility and transparency. Consequently, this makes them suitable for food packaging, organic light-emitting diodes and flexible solar cells. Nonetheless, raw plastics do not possess sufficient barrier functionality against oxygen and water vapour, which is of paramount importance for most applications. A widespread solution is to deposit thin silicon oxide layers using plasma processes. However, silicon oxide layers do not always fulfil the requirements concerning adhesion and barrier performance when deposited on films. Thus, plasma pre-treatment is often necessary. To analyse the influence of a plasma-based pre-treatment on barrier performance, different plasma pre-treatments on three reactor setups were applied to a very smooth polyethylene terephthalate film before depositing a silicon oxide barrier layer. In this paper, the influence of oxygen and argon plasma pre-treatments towards the barrier performance is discussed examining the chemical and topological change of the film. It was observed that a short one-to-ten-second plasma treatment can reduce the oxygen transmission rate by a factor of five. The surface chemistry and the surface topography change significantly for these short treatment times, leading to an increased surface energy. The surface roughness rises slowly due to the development of small spots in the nanometre range. For very long treatment times, surface roughness of the order of the barrier layer's thickness results in a complete loss of barrier properties. During plasma pre-treatment, the trade-off between surface activation and roughening of the surface has to be carefully considered.

Surface pre-treatment for barrier coatings on polyethylene terephthalate

International Nuclear Information System (INIS)

Bahre, H; Böke, M; Winter, J; Bahroun, K; Behm, H; Hopmann, Ch; Steves, S; Awakowicz, P

2013-01-01

Polymers have favourable properties such as light weight, flexibility and transparency. Consequently, this makes them suitable for food packaging, organic light-emitting diodes and flexible solar cells. Nonetheless, raw plastics do not possess sufficient barrier functionality against oxygen and water vapour, which is of paramount importance for most applications. A widespread solution is to deposit thin silicon oxide layers using plasma processes. However, silicon oxide layers do not always fulfil the requirements concerning adhesion and barrier performance when deposited on films. Thus, plasma pre-treatment is often necessary. To analyse the influence of a plasma-based pre-treatment on barrier performance, different plasma pre-treatments on three reactor setups were applied to a very smooth polyethylene terephthalate film before depositing a silicon oxide barrier layer. In this paper, the influence of oxygen and argon plasma pre-treatments towards the barrier performance is discussed examining the chemical and topological change of the film. It was observed that a short one-to-ten-second plasma treatment can reduce the oxygen transmission rate by a factor of five. The surface chemistry and the surface topography change significantly for these short treatment times, leading to an increased surface energy. The surface roughness rises slowly due to the development of small spots in the nanometre range. For very long treatment times, surface roughness of the order of the barrier layer's thickness results in a complete loss of barrier properties. During plasma pre-treatment, the trade-off between surface activation and roughening of the surface has to be carefully considered. (paper)

Measuring industrial energy savings

International Nuclear Information System (INIS)

Kelly Kissock, J.; Eger, Carl

2008-01-01

Accurate measurement of energy savings from industrial energy efficiency projects can reduce uncertainty about the efficacy of the projects, guide the selection of future projects, improve future estimates of expected savings, promote financing of energy efficiency projects through shared-savings agreements, and improve utilization of capital resources. Many efforts to measure industrial energy savings, or simply track progress toward efficiency goals, have had difficulty incorporating changing weather and production, which are frequently major drivers of plant energy use. This paper presents a general method for measuring plant-wide industrial energy savings that takes into account changing weather and production between the pre and post-retrofit periods. In addition, the method can disaggregate savings into components, which provides additional resolution for understanding the effectiveness of individual projects when several projects are implemented together. The method uses multivariable piece-wise regression models to characterize baseline energy use, and disaggregates savings by taking the total derivative of the energy use equation. Although the method incorporates search techniques, multi-variable least-squares regression and calculus, it is easily implemented using data analysis software, and can use readily available temperature, production and utility billing data. This is important, since more complicated methods may be too complex for widespread use. The method is demonstrated using case studies of actual energy assessments. The case studies demonstrate the importance of adjusting for weather and production between the pre- and post-retrofit periods, how plant-wide savings can be disaggregated to evaluate the effectiveness of individual retrofits, how the method can identify the time-dependence of savings, and limitations of engineering models when used to estimate future savings

Pre-Amplifier Module for Laser Inertial Confinement Fusion

Energy Technology Data Exchange (ETDEWEB)

Heebner, J E; Bowers, M W

2008-02-06

The Pre-Amplifier Modules (PAMs) are the heart of the National Ignition Facility (NIF), providing most of the energy gain for the most energetic laser in the world. Upon completion, NIF will be the only laboratory in which scientists can examine the fusion processes that occur inside stars, supernovae, and exploding nuclear weapons and that may someday serve as a virtually inexhaustible energy source for electricity. Consider that in a fusion power plant 50 cups of water could provide the energy comparable to 2 tons of coal. Of paramount importance for achieving laser-driven fusion ignition with the least energy input is the synchronous and symmetric compression of the target fuel--a condition known as laser power balance. NIF's 48 PAMs thus must provide energy gain in an exquisitely stable and consistent manner. While building one module that meets performance requirements is challenging enough, our design has already enabled the construction and fielding of 48 PAMs that are stable, uniform, and interchangeable. PAM systems are being tested at the University of Rochester's Laboratory for Laser Energetics, and the Atomic Weapons Enterprise of Great Britain has purchased the PAM power system.

Optimization of energy planning strategies in municipalities

DEFF Research Database (Denmark)

Petersen, Jens-Phillip

approach, suffers from insufficient information, tools and resources. Municipalities are often unable to take on a steering role in community energy planning. To overcome these barriers and guide municipalities in the pre-project phase, a decision-support methodology, based on community energy profiles...

Energy efficient hydrocyclones; Energieffektive hydrocykloner

Energy Technology Data Exchange (ETDEWEB)

Korsbaek, P.; Damgaard, L.; Nielsen, John Bo; Christensen, Kent; Overgaard, J.

2009-05-15

The project's primary purpose is to investigate the energy savings opportunities by using hydro cyclones for separation instead of more traditional separation technologies like rotary sieves and centrifuges. The hydro cyclone plant has been tested through two campaigns. In the 2007/2008 campaign the plant was tested at the Karup potato flour factory and here the cyclone plant achieved energy savings of approx. 32% compared to the current sieve plant. This result includes consumption for a macerator shredder, pre-filtering of the gratings and additional dewatering of the pulp. In the 2008/2009 campaign the plant was tested at the Brande potato flour factory, and here the plant achieved energy savings of 54% compared with the traditional sieve system. This result includes consumption for a shear pump for the homogenization of the gratings and additional consumption for dewatering of pulp. Pre-filtering of the gratings is not thought to be necessary. (ln)

Prevalence and risk factors of pre-hypertension in Congolese pre ...

African Journals Online (AJOL)

Prevalence and risk factors of pre-hypertension in Congolese pre and post menopausal women. M.J.S. Muchanga, F.B. Lepira, R Tozin, E.P. Mbelambela, N.R. Ngatu, E.K. Sumaili, J.R. Makulo, N Suganuma ...

The interaction between Xe and F in Si (1 0 0) pre-amorphised with 20 keV Xe and implanted with low energy BF{sub 2}

Energy Technology Data Exchange (ETDEWEB)

Werner, M. [Joule Physics Laboratory, Institute of Materials Research, University of Salford, Salford M54WT (United Kingdom)]. E-mail: m.werner@pgr.salford.ac.uk; Berg, J.A. van den [Joule Physics Laboratory, Institute of Materials Research, University of Salford, Salford M54WT (United Kingdom); Armour, D.G. [Joule Physics Laboratory, Institute of Materials Research, University of Salford, Salford M54WT (United Kingdom); Carter, G. [Joule Physics Laboratory, Institute of Materials Research, University of Salford, Salford M54WT (United Kingdom); Feudel, T. [AMD Saxony LLC and Co. KG, Wilschdorfer Landstrasse, 101 D-01109 Dresden (Italy); Herden, M. [AMD Saxony LLC and Co. KG, Wilschdorfer Landstrasse, 101 D-01109 Dresden (Italy); Bersani, M. [ITC IRST, 38050 Povo, Trento (Italy); Giubertoni, D. [ITC IRST, 38050 Povo, Trento (Italy); Bailey, P. [CCLRC Daresbury Laboratory, Daresbury WA44A (United Kingdom); Noakes, T.C.Q. [CCLRC Daresbury Laboratory, Daresbury WA44A (United Kingdom)

2004-12-15

The pre-amorphisation of Si by Xe{sup +} ions, before source/drain and extension implants, is an attractive alternative to Ge{sup +} or Si{sup +}, as it produces sharper amorphous/crystalline interfaces. Si (1 0 0) samples pre-amorphised with 20 keV Xe{sup +} to a nominal dose of 2E14 cm{sup -2} were implanted with 1 and 3 keV BF{sub 2} {sup +} to doses of 7E14 cm{sup -2}. Samples were annealed at temperatures ranging from 600 to 1130 deg. C and investigated by medium energy ion scattering (MEIS) and secondary ion mass spectrometry (SIMS). Following annealing, it was observed that implanted Xe has interacted with F originating from the BF{sub 2} {sup +} implant. MEIS studies showed that for all annealing conditions, approximately half of the Xe accumulated at depths of 7 nm for the 1 keV and at 13 nm for the 3 keV BF{sub 2} {sup +} implant. This equates to the end of range of B and F within the amorphous Si. SIMS showed that in the pre-amorphised samples, approximately 10% of the F migrates into the bulk and is trapped at the same depth in a {approx}1:1 ratio to Xe. A small fraction of the implanted B is also trapped. The effect is interpreted in terms of the formation of a defect structure within the amorphised Si, leading to F stabilised Xe bubble or XeF compound formation.

Investigation on a TEA-CO II laser with surface corona pre-ionization

Science.gov (United States)

Behjat, A.; Aram, M.; Soltanmoradi, F.; Shabanzadeh, M.

2006-05-01

The construction of a surface corona UV pre-ionized TEA CO II laser is described and dependence of its average output energy of the laser to gas mixture, discharge voltage and repetition rate is investigated. The electric circuit diagram and geometry of the pre-ionization system are presented. Configuration of circuit has been designed to produce only impulsive voltage difference between the laser electrodes. Also, the triggering configuration of trigatron is prepared for fast operation to minimize the arc occurrence as much as possible. Some data of current, voltage, laser pulses and average output energy versus gas mixture and applied voltages are given. IR spectrometer is used for measurements of central output wavelength of the laser. Operation of the laser on two adjacent vibrational-rotational transitions of CO II molecule has been observed that shows the ability of this laser for working on multi-line in a same time for special applications.

Modification of Bi:YIG film properties by substrate surface ion pre-treatment

International Nuclear Information System (INIS)

Shaposhnikov, A.N.; Prokopov, A.R.; Karavainikov, A.V.; Berzhansky, V.N.; Mikhailova, T.V.; Kotov, V.A.; Balabanov, D.E.; Sharay, I.V.; Salyuk, O.Y.; Vasiliev, M.; Golub, V.O.

2014-01-01

Highlights: • Effects of substrates ion beam treatment on magnetoptical properties Bi:YIG films. • Substrate surface damage results in sign inversion of the magneto-optical effects. • Atomically smooth films growth takes place on low energy ions treated substrates. • High energy ions treatment results in selective nucleation mechanism of the growth. - Abstract: The effect of a controlled ion beam pre-treatment of (1 1 1)-oriented Gd 3 Ga 5 O 12 substrates on the magneto-optical properties and surface morphology of the ultrathin bismuth-substituted yttrium–iron garnet films with a composition Bi 2.8 Y 0.2 Fe 5 O 12 was studied. It has been shown that the observed sign inversion of magneto-optical effects (Faraday rotation and magnetic circular dichroism) observed in films that were deposited on the GGG substrate pre-treated by 1 keV and 4 keV Ar + ion beams is a result of the substrate surface amorphization caused by the ion bombardment

Pre-Big Bang, fundamental Physics and noncyclic cosmologies

Directory of Open Access Journals (Sweden)

Gonzalez-Mestres L.

2014-04-01

Full Text Available Detailed analyses of WMAP and Planck data can have significant implications for noncyclic pre-Big Bang approaches incorporating a new fundamental scale beyond the Planck scale and, potentially, new ultimate constituents of matter with unconventional basic properties as compared to standard particles. Cosmic-ray experiments at the highest energies can also yield relevant information. Hopefully, future studies will be able to deal with alternatives: i to standard physics for the structure of the physical vacuum, the nature of space-time, the validity of quantum field theory and conventional symmetries, the interpretation of string-like theories...; ii to standard cosmology concerning the origin and evolution of our Universe, unconventional solutions to the cosmological constant problem, the validity of inflationary scenarios, the need for dark matter and dark energy... Lorentz-like symmetries for the properties of matter can then be naturally stable space-time configurations resulting from more general primordial scenarios that incorporate physics beyond the Planck scale and describe the formation and evolution of the physical vacuum. A possible answer to the question of the origin of half-integer spins can be provided by a primordial spinorial space-time with two complex coordinates instead of the conventional four real ones, leading to a really new cosmology. We discuss basic questions and phenomenological topics concerning noncyclic pre-Big Bang cosmologies and potentially related physics.

The Effect of Carbonaceous Reductant Selection on Chromite Pre-reduction

Science.gov (United States)

Kleynhans, E. L. J.; Beukes, J. P.; Van Zyl, P. G.; Bunt, J. R.; Nkosi, N. S. B.; Venter, M.

2017-04-01

Ferrochrome (FeCr) production is an energy-intensive process. Currently, the pelletized chromite pre-reduction process, also referred to as solid-state reduction of chromite, is most likely the FeCr production process with the lowest specific electricity consumption, i.e., MWh/t FeCr produced. In this study, the effects of carbonaceous reductant selection on chromite pre-reduction and cured pellet strength were investigated. Multiple linear regression analysis was employed to evaluate the effect of reductant characteristics on the aforementioned two parameters. This yielded mathematical solutions that can be used by FeCr producers to select reductants more optimally in future. Additionally, the results indicated that hydrogen (H)- (24 pct) and volatile content (45.8 pct) were the most significant contributors for predicting variance in pre-reduction and compressive strength, respectively. The role of H within this context is postulated to be linked to the ability of a reductant to release H that can induce reduction. Therefore, contrary to the current operational selection criteria, the authors believe that thermally untreated reductants ( e.g., anthracite, as opposed to coke or char), with volatile contents close to the currently applied specification (to ensure pellet strength), would be optimal, since it would maximize H content that would enhance pre-reduction.

Existing Whole-House Solutions Case Study: Group Home Energy Efficiency Retrofit for 30% Energy Savings, Washington, D.C.

Energy Technology Data Exchange (ETDEWEB)

None

2013-11-01

Energy efficiency retrofits (EERs) face many challenges on the path to scalability. Limited budgets, cost effectiveness, risk factors, and accessibility impact the type and the extent of measures that can be implemented feasibly to achieve energy savings goals. Group home retrofits can face additional challenges than those in single family homes – such as reduced access (occupant-in-place restrictions) and lack of incentives for occupant behavioral change. This project studies the specification, implementation, and energy savings from an EER in a group home, with an energy savings goal of 30%. This short term test report chronicles the retrofit measures specified, their projected cost-effectiveness using building energy simulations, and the short term test results that were used to characterize pre-retrofit and post-retrofit conditions. Additionally, the final report for the project will include analysis of pre- and post-retrofit performance data on whole building energy use, and an assessment of the energy impact of occupant interface with the building (i.e., window operation). Ultimately, the study’s results will be used to identify cost effective EER measures that can be implemented in group homes, given constraints that are characteristic of these buildings. Results will also point towards opportunities for future energy savings.

Occupant-in-Place Energy Efficiency Retrofit in a Group Home for 30% Energy Savings in Climate Zone 4

Energy Technology Data Exchange (ETDEWEB)

Moore, M.

2013-08-01

Energy efficiency retrofits (EERs) face many challenges on the path to scalability. Limited budgets, cost effectiveness, risk factors, and accessibility impact the type and the extent of measures that can be implemented feasibly to achieve energy savings goals. Group home retrofits can face additional challenges than those in single family homes - such as reduced access (occupant-in-place restrictions) and lack of incentives for occupant behavioral change. This project studies the specification, implementation, and energy savings from an EER in a group home, with an energy savings goal of 30%. This short term test report chronicles the retrofit measures specified, their projected cost-effectiveness using building energy simulations, and the short term test results that were used to characterize pre-retrofit and post-retrofit conditions. Additionally, the final report for the project will include analysis of pre- and post-retrofit performance data on whole building energy use, and an assessment of the energy impact of occupant interface with the building (i.e., window operation). Ultimately, the study's results will be used to identify cost effective EER measures that can be implemented in group homes, given constraints that are characteristic of these buildings. Results will also point towards opportunities for future energy savings.

Occupant-in-Place Energy Efficiency Retrofit in a Group Home for 30% Energy Savings in Climate Zone 4

Energy Technology Data Exchange (ETDEWEB)

Moore, Mike [Building America Partnership for Improved Residential Construction (BA-PIRC), Cocoa, FL (United States)

2013-08-01

Energy efficiency retrofits (EERs) face many challenges on the path to scalability. Limited budgets, cost effectiveness, risk factors, and accessibility impact the type and the extent of measures that can be implemented feasibly to achieve energy savings goals. Group home retrofits can face additional challenges than those in single family homes – such as reduced access (occupant-in-place restrictions) and lack of incentives for occupant behavioral change. This project studies the specification, implementation, and energy savings from an EER in a group home, with an energy savings goal of 30%. This short term test report chronicles the retrofit measures specified, their projected cost effectiveness using building energy simulations, and the short term test results that were used to characterize pre-retrofit and post-retrofit conditions. Additionally, the final report for the project will include analysis of pre- and post-retrofit performance data on whole building energy use, and an assessment of the energy impact of occupant interface with the building (i.e., window operation). Ultimately, the study’s results will be used to identify cost-effective EER measures that can be implemented in group homes, given constraints that are characteristic of these buildings. Results will also point towards opportunities for future energy savings.

Comparing the IRT Pre-equating and Section Pre-equating: A Simulation Study.

Science.gov (United States)

Hwang, Chi-en; Cleary, T. Anne

The results obtained from two basic types of pre-equatings of tests were compared: the item response theory (IRT) pre-equating and section pre-equating (SPE). The simulated data were generated from a modified three-parameter logistic model with a constant guessing parameter. Responses of two replication samples of 3000 examinees on two 72-item…

The three-electron bond =Sipre-darkened ytterbium-doped silica

DEFF Research Database (Denmark)

Mattsson, Kent Erik

2013-01-01

The formation and bleaching of color centers during annealing of pre-darkened ytterbium-doped silica fibers is modeled by three-electron bond (TEB) = Si... bonds is described in terms of a Markov statistical model with state change set by Bose-Einstein phonon statistics. The center hold one terminal and four active states with activation energies for transitions among these found to match bond energies of molecular oxygen in ionic character bonds of 1...... and 1½ bond order. Experimentally observed in- and decrease in absorption during ramp and isothermal annealing of pre-darkened ytterbium co-doped silica fibers are hereby matched by a set of = Si

Energy Experiments for STEM Students

Science.gov (United States)

Fanchi, John

2011-03-01

Texas Christian University (TCU) is developing an undergraduate program that prepares students to become engineers with an emphasis in energy systems. One of the courses in the program is a technical overview of traditional energy (coal, oil and gas), nuclear energy, and renewable energy that requires as a pre-requisite two semesters of calculus-based physics. Energy experiments are being developed that will facilitate student involvement and provide hands-on learning opportunities. Students participating in the course will improve their understanding of energy systems; be introduced to outstanding scientific and engineering problems; learn about the role of energy in a global and societal context; and evaluate contemporary issues associated with energy. This talk will present the status of experiments being developed for the technical energy survey course.

Understanding the political economy and key drivers of energy access in addressing national energy access priorities and policies: African Perspective

International Nuclear Information System (INIS)

Khennas, Smail

2012-01-01

This paper is focused on the key drivers of energy access in North and sub-Saharan Africa which are characterized by huge discrepancies in terms of energy access to modern forms of energy. The paper points out that long term development strategies and large programmes with significant financial resources are essential to achieving substantial results in terms of energy access. The paper argues that building up the energy infrastructure (power plants, grid interconnections and small-scale decentralized energy options in rural areas.) is a pre-condition for economic growth and ultimately for energy access. It underlines that historically there is a trend towards more efficient, convenient and cost effective forms of energy. Low carbon path and above all renewable will therefore play an increasing role in the energy mix in the next couple of decades. Manufacturing of capital goods for the renewable energy industry in Africa will be a key challenge to achieving energy security economic growth and energy access. - Highlights: ► Sharp differences of energy access situation and approaches between North and Sub Saharan Africa. ► Energy infrastructure is a pre-condition to economic growth and energy access. ► Interconnections and small-scale decentralized energy schemes are a good mechanism to increasing energy access. ► However interconnections will only contribute marginally to the urban-rural energy divide. ► Manufacturing of capital goods is a key challenge to economic development.

Portion size and intended consumption. Evidence for a pre-consumption portion size effect in males?

Science.gov (United States)

Robinson, Eric; te Raa, Wesselien; Hardman, Charlotte A

2015-08-01

Larger portions increase energy intake (the 'portion size effect'); however, the mechanisms behind this effect are unclear. Although pre-meal intentions are thought to be an important determinant of energy intake, little research has examined how much of a meal individuals intend to eat when served standard versus larger portion sizes. Three studies examined the effect of manipulating portion size on intended food consumption. In Studies 1 (spaghetti bolognese) and 2 (curry and rice) male participants were shown an image of either a standard or a larger meal and indicated how much of the meal they intended to consume. In Study 3 male and female participants were served either a standard or a larger portion of ice cream for dessert, they indicated how much they intended to consume and then ate as much of the ice cream as they desired. Regardless of being shown standard or large portion sizes, in Studies 1 and 2 participants reported that they intended to eat the majority of the meal, equating to a large difference in intended energy consumption between portion size conditions (a 'pre-consumption portion size effect'). This finding was replicated in male participants in Study 3, although females intended to eat a smaller proportion of the larger portion of ice cream, compared to the standard portion. Both male and female participants tended to eat in accordance with their pre-meal intentions and a portion size effect on actual consumption was subsequently observed in males, but not in females. The portion size effect may be observed when measuring pre-meal intended consumption in males. Copyright © 2015. Published by Elsevier Ltd.

Convective environment in pre-monsoon and monsoon conditions over the Indian subcontinent: the impact of surface forcing

Directory of Open Access Journals (Sweden)

L. Thomas

2018-05-01

Full Text Available Thermodynamic soundings for pre-monsoon and monsoon seasons from the Indian subcontinent are analysed to document differences between convective environments. The pre-monsoon environment features more variability for both near-surface moisture and free-tropospheric temperature and moisture profiles. As a result, the level of neutral buoyancy (LNB and pseudo-adiabatic convective available potential energy (CAPE vary more for the pre-monsoon environment. Pre-monsoon soundings also feature higher lifting condensation levels (LCLs. LCL heights are shown to depend on the availability of surface moisture, with low LCLs corresponding to high surface humidity, arguably because of the availability of soil moisture. A simple theoretical argument is developed and showed to mimic the observed relationship between LCLs and surface moisture. We argue that the key element is the partitioning of surface energy flux into its sensible and latent components, that is, the surface Bowen ratio, and the way the Bowen ratio affects surface buoyancy flux. We support our argument with observations of changes in the Bowen ratio and LCL height around the monsoon onset, and with idealized simulations of cloud fields driven by surface heat fluxes with different Bowen ratios.

Energy and the English Industrial Revolution.

Science.gov (United States)

Wrigley, E A

2013-03-13

Societies before the Industrial Revolution were dependent on the annual cycle of plant photosynthesis for both heat and mechanical energy. The quantity of energy available each year was therefore limited, and economic growth was necessarily constrained. In the Industrial Revolution, energy usage increased massively and output rose accordingly. The energy source continued to be plant photosynthesis, but accumulated over a geological age in the form of coal. This poses a problem for the future. Fossil fuels are a depleting stock, whereas in pre-industrial time the energy source, though limited, was renewed each year.

Viability assessment of regional biomass pre-processing center based bioethanol value chains

Science.gov (United States)

Carolan, Joseph E.

Petroleum accounts for 94% of all liquid fuels and 36% of the total of all energy consumed in the United States. Petroleum dependence is problematic because global petroleum reserves are estimated to last only for 40 to 60 years at current consumption rates; global supplies are often located in politically unstable or unfriendly regions; and fossil fuels have negative environmental footprints. Domestic policies have aimed at promoting alternative, renewable liquid fuels, specifically bio-fuels derived from organic matter. Cellulosic bio-ethanol is one promising alternative fuel that has featured prominently in federal bio-fuel mandates under the Energy Independence and Security Act, 2007. However, the cellulosic bio-ethanol industry faces several technical, physical and industrial organization challenges. This dissertation examines the concept of a network of regional biomass pre-treatment centers (RBPC) that form an extended biomass supply chain feeding into a simplified biorefinery as a way to overcome these challenges. The analyses conducted address the structural and transactional issues facing bio-ethanol value chain establishment; the technical and financial feasibility of a stand alone pre-treatment center (RBPC); the impact of distributed pre-treatment on biomass transport costs; a comparative systems cost evaluation of the performance of the RBPC chain versus a fully integrated biorefinery (gIBRh), followed by application of the analytical framework to three case study regions.

Pre: Surgical orthopedic pre-maxillary alignment in bilateral cleft lip and palate patient

Directory of Open Access Journals (Sweden)

Vijaya Prasad Kamavaram Ellore

2012-01-01

Full Text Available Pre-surgical orthopedic appliances are mainly used to retract and align the protruded and deviated pre-maxilla and to facilitate initial lip repair. This article presents a case report of a five year old male child patient with bilateral cleft lip and palate in whom a special custom made pre-surgical orthopedic appliance was delivered. Use of a special custom made presurgical orthopedic appliance for repositioning pre-maxilla in bilateral cleft lip and palate patient is discussed in this article.

Flashback resistant pre-mixer assembly

Science.gov (United States)

Laster, Walter R [Oviedo, FL; Gambacorta, Domenico [Oviedo, FL

2012-02-14

A pre-mixer assembly associated with a fuel supply system for mixing of air and fuel upstream from a main combustion zone in a gas turbine engine. The pre-mixer assembly includes a swirler assembly disposed about a fuel injector of the fuel supply system and a pre-mixer transition member. The swirler assembly includes a forward end defining an air inlet and an opposed aft end. The pre-mixer transition member has a forward end affixed to the aft end of the swirler assembly and an opposed aft end defining an outlet of the pre-mixer assembly. The aft end of the pre-mixer transition member is spaced from a base plate such that a gap is formed between the aft end of the pre-mixer transition member and the base plate for permitting a flow of purge air therethrough to increase a velocity of the air/fuel mixture exiting the pre-mixer assembly.

Early effects of neutering on energy expenditure in adult male cats.

Directory of Open Access Journals (Sweden)

Alfreda Wei

Full Text Available The initial cause of post-neutering weight gain in male cats is not entirely known. There is evidence that energy intake (EI increases rapidly post-neutering, but it is not clear if neutering also decreases energy expenditure (EE prior to weight gain. Thus, the purpose of this study was to determine if a decrease in EE contributes to the initial shift toward positive energy balance in neutered male cats. To determine the influence of neutering on EE independent of changes in EI and body weight (BW, male cats were fed at their pre-neutering maintenance EI and EE was measured at 4 days pre-neutering, 3-4 days post-neutering, and 9 days post- neutering. Ad libitum food access was then provided for 6 months. Body composition was measured and blood samples collected for serum chemistry at pre-neutering and 7 days, 13 days and 6 months post-neutering. Total energy expenditure (TEE adjusted for lean body mass (LBM did not change in cats from pre-neutering to 9 days post-neutering. However, TEE adjusted for BW and resting energy expenditure adjusted for either LBM or BW showed a small, but significant (P<0.05 increase from pre-neutering to 9 days post-neutering. When allowed free choice food access, cats showed significant increases of food intake (FI and BW. Circulating concentrations of ghrelin increased, while adiponectin levels decreased following neutering. The results of this study indicate that initial post-neutering weight gain in male cats results from increased FI and not decreased EE. Long-term control of FI should be initiated after neutering to prevent hyperphagia and weight gain in male cats.

Energy efficiency and renewable energy modeling with ETSAP TIAM - challenges, opportunities, and solutions

DEFF Research Database (Denmark)

Gregg, Jay Sterling; Balyk, Olexandr; Pérez, Cristian Hernán Cabrera

over pre-industrial times. To accomplish this, pathways are constructed for each objective, which then form the basis for a scenario analysis using the Energy Technology System Analysis Program TIMES Integrated Assessment Model (ETSAP-TIAM). This presentation focuses on the modeling challenges...

[Advances in research on mechanisms of seed pre-treatments.

Science.gov (United States)

Liu, Xu; Liu, Juan; Liu, Qian; Gao, Ya Ni; Wang, Quan Zhen

2016-11-18

Seeds play a vital role in nature and agro-ecosystems. The success of seed germination and the establishment of a normal seedling determine the propagation and survival of a plant species, but seed vigor is often seriously damaged because of seed aging, dormancy and the deterioration of natural habitat. Thus, exploring methods for improving germination quality is of great significance to ecology and the economy. Based on the latest international reports, seed pre-treatments are the most practical and effective methods for improving plant performance, increasing yields and enhancing stress resistance. This review provided a summary of the current pre-sowing treatment technologies and the physiological and biochemical responses of plants to these methods by addressing gene expression, cytological effects, enzyme system activities, material and energy metabolism, antioxidation mechanisms and signal transduction pathways. We also interpreted the mechanisms of the seed pre-treatment methods from aspects of seed germination acceleration and stress resistance enhancement. The bottleneck in seed pre-treatments at the cytological and molecular levels and the problems involved in their application were also discussed. Thus far, most studies had largely focused on the partial reaction alterations of plant biochemistry and enzyme activities, and they had generally been characterized by a lack of systematic and holistic study for applications to crop production. Finally, we proposed an outlook for further study in an attempt to provide a prospective and scientific reference for plant germplasm conservation, high-efficiency organic agriculture development and ecological environment re-construction.

Aristotelian pre-Socratics, A glance at Aristotle's Narrative from pre-Socratics

OpenAIRE

Mehdi Qavam Safari; M.B Ghomi

2015-01-01

In this article, it's tried to study Aristotle's narrative of  pre-Socratics on the base of Aristotle's texts and mainly using  metaphysics, physics, genesis and decadence books. It is also tried to show how Aristotle has interpreted all the pre-Socratics in one way and on the base of his own philosophy framework. He interprets pre-Socratic Arche as an element that means comprehensive matter which is nothing itself, but everything is combination of it and even considers that as substance and ...

Reservoir characterization and final pre-test analysis in support of the compressed-air-energy-storage Pittsfield aquifer field test in Pike County, Illinois

Energy Technology Data Exchange (ETDEWEB)

Wiles, L.E.; McCann, R.A.

1983-06-01

The work reported is part of a field experimental program to demonstrate and evaluate compressed air energy storage in a porous media aquifer reservoir near Pittsfield, Illinois. The reservoir is described. Numerical modeling of the reservoir was performed concurrently with site development. The numerical models were applied to predict the thermohydraulic performance of the porous media reservoir. This reservoir characterization and pre-test analysis made use of evaluation of bubble development, water coning, thermal development, and near-wellbore desaturation. The work was undertaken to define the time required to develop an air storage bubble of adequate size, to assess the specification of instrumentation and above-ground equipment, and to develop and evaluate operational strategies for air cycling. A parametric analysis was performed for the field test reservoir. (LEW)

Building America Case Study: Retrofitting a 1960s Split-Level, Cold-Climate Home, Westport, Connecticut; Whole-House Solutions for Existing Homes, Energy Efficiency & Renewable Energy (EERE)

Energy Technology Data Exchange (ETDEWEB)

None

2015-08-01

??National programs such as Home Performance with ENERGY STAR(R) and numerous other utility air sealing programs have brought awareness to homeowners of the benefits of energy efficiency retrofits. Yet, these programs tend to focus on the low-hanging fruit: air-sealing the thermal envelope and ductwork where accessible, switch to efficient lighting, and low-flow fixtures. At the other end of the spectrum, deep-energy retrofit programs are also being encouraged by various utilities across the country. While deep energy retrofits typically seek 50% energy savings, they are often quite costly and most applicable to gut-rehab projects. A significant potential for lowering energy usage in existing homes lies between the low hanging fruit and deep energy retrofit approaches - retrofits that save approximately 30% in energy over the existing conditions. A key is to be non-intrusive with the efficiency measures so the retrofit projects can be accomplished in occupied homes. This cold climate retrofit project involved the design and optimization of a home in Connecticut that sought to improve energy savings by at least 30% (excluding solar PV) over the existing home's performance. This report documents the successful implementation of a cost-effective solution package that achieved performance greater than 30% over the pre-retrofit - what worked, what did not, and what improvements could be made. Confirmation of successfully achieving 30% source energy savings over the pre-existing conditions was confirmed through energy modeling and comparison of the utility bills pre- and post- retrofit.

Groundwater heat pump performance improvement with pre-coolers and pump modification: Final report for the 1985-86 SOMED (School of Mines and Energy Development) project year

Energy Technology Data Exchange (ETDEWEB)

Kavanaugh, S.

1986-09-30

Improved performance of groundwater heat pumps can be realized with a more effective and efficient utilization of the thermal properties of shallow groundwater. These systems circulate water from aquifers through water source heat pumps to achieved high efficiencies and capacities. This project concludes that a 10 to 15 percent cooling performance improvement can be realized by pre-cooling the room air with the 55/sup 0/ to 67/sup 0/F groundwater available in large portions of the Southeast. Proper design of these pre-coolers eliminates unnecessary auxiliary energy requirements. The efficiency of the overall system can be further improved with modifications to current methods of water circulation system design. Pressure requirements are minimized by maintaining a low unit inlet pressure (8 psig maximum), removing unnecessary loop restrictions and injection below the water table. Standard submersible water pumps exceed the resulting required size for residential groundwater heat pumps. Simple modifications can be made by the manufacturer to correct this problem. The result is an overall 15 to 40 percent performance improvement over high efficiency air source heat pumps with a simple payback of between 0 to 10 years in most cases.

Linear elastic obstacles: analysis of experimental results in the case of stress dependent pre-exponentials

International Nuclear Information System (INIS)

Surek, T.; Kuon, L.G.; Luton, M.J.; Jones, J.J.

1975-01-01

For the case of linear elastic obstacles, the analysis of experimental plastic flow data is shown to have a particularly simple form when the pre-exponential factor is a single-valued function of the modulus-reduced stress. The analysis permits the separation of the stress and temperature dependence of the strain rate into those of the pre-exponential factor and the activation free energy. As a consequence, the true values of the activation enthalpy, volume and entropy also are obtained. The approach is applied to four sets of experimental data, including Zr, and the results for the pre-exponential term are examined for self-consistency in view of the assumed functional dependence

Pre-1989 epidemiological surveys of low-level dose pre-conception irradiation

International Nuclear Information System (INIS)

Rose, K.S.B.

1990-01-01

Information from 59 pre-1989 epidemiological surveys concerning pre-conception irradiation at doses less than 0.1 Gy has been collated to determine whether any consistent patterns of health effects emerge. The surveys are considered in three groups: childhood malignancies, Down's syndrome and indicators of reproductive damage. Although a pattern is observed for Down's syndrome, no reliable associations are apparent for childhood malignancies (where all surveys pre-date the Gardner survey at Sellafield) or indications of reproductive damage. The twelve surveys of Down's syndrome in relation to maternal pre-conception irradiation received for medical reasons show a pattern consistent with a doubling dose of about 20 mGy. This doubling dose value is, however, not based on individual measurements of ovarian dose and is inconsistent with results from high-level dose surveys. There is no association between paternal irradiation and Down's syndrome. (author)

Validation of a pre-coded food record for infants and young children

DEFF Research Database (Denmark)

Gondolf, Ulla Holmboe; Tetens, Inge; Hills, A. P.

2012-01-01

Background/Objectives:To assess the validity of a 7-day pre-coded food record (PFR) method in 9-month-old infants against metabolizable energy intake (ME(DLW)) measured by doubly labeled water (DLW); additionally to compare PFR with a 7-day weighed food record (WFR) in 9-month-old infants and 36...

Harvesting of energy wood in young stands in connection with pre-commercial thinning; Energiapuun korjuu taimikon harvennuksen yhteydessae

Energy Technology Data Exchange (ETDEWEB)

Haemaelaeinen, J; Lilleberg, R [Metsaeteho, Helsinki (Finland)

1997-12-31

A forwarder equipped with the `Naarva felling-loading device` was studied in pre-commercial thinning and the costs of the method were compared with young stand treatment with a brush saw. Trials were made in three different pine stands, in which the dominant height varied between 3.7 and 9.3 meters. The mean height of trees to be felled was 3.1 - 4.8 meters, density 6 000 - 10 000 trees/hectare and volume - stemwood and branches - 15 - 61 m{sup 3} (s)/ha. Harvesting production per effective hour varied by sample plot between 0.8 and 2.9 m{sup 3}, with a forest haulage distance of 45 - 150 meters. The production increased clearly with a higher removal per hectare. The feller-forwarder was used for the first time in young stand treatment and the productivity can be increased by equipment development. The calculated harvesting costs at road side were 62 - 305 Fmk/m{sup 3} (34 - 170 FIM/MWh) or 3 770 - 6 600 FIM/ha. In the calculations haulage distance was fixed to 250 m and the state subsidies for young stand treatment and energy wood harvesting were taken into account. The results showed that mechanised harvesting in the first place should be done in stands with a removal of at least 40 - 50 m{sup 3}/ha. The thinning based on gathering energy wood was for the forest owner in most cases more expensive than felling the trees to the ground by brush saw. Critical elements for how competitive the mechanised method is, are the regional coverage of heating plants and their ability to pay for wood fuel. Within the Bioenergy project Metsaeteho has continued with a project, which focuses on development of the machine and also studies the overall economy of the method, from the viewpoint of wood production

Harvesting of energy wood in young stands in connection with pre-commercial thinning; Energiapuun korjuu taimikon harvennuksen yhteydessae

Energy Technology Data Exchange (ETDEWEB)

Haemaelaeinen, J.; Lilleberg, R. [Metsaeteho, Helsinki (Finland)

1996-12-31

A forwarder equipped with the `Naarva felling-loading device` was studied in pre-commercial thinning and the costs of the method were compared with young stand treatment with a brush saw. Trials were made in three different pine stands, in which the dominant height varied between 3.7 and 9.3 meters. The mean height of trees to be felled was 3.1 - 4.8 meters, density 6 000 - 10 000 trees/hectare and volume - stemwood and branches - 15 - 61 m{sup 3} (s)/ha. Harvesting production per effective hour varied by sample plot between 0.8 and 2.9 m{sup 3}, with a forest haulage distance of 45 - 150 meters. The production increased clearly with a higher removal per hectare. The feller-forwarder was used for the first time in young stand treatment and the productivity can be increased by equipment development. The calculated harvesting costs at road side were 62 - 305 Fmk/m{sup 3} (34 - 170 FIM/MWh) or 3 770 - 6 600 FIM/ha. In the calculations haulage distance was fixed to 250 m and the state subsidies for young stand treatment and energy wood harvesting were taken into account. The results showed that mechanised harvesting in the first place should be done in stands with a removal of at least 40 - 50 m{sup 3}/ha. The thinning based on gathering energy wood was for the forest owner in most cases more expensive than felling the trees to the ground by brush saw. Critical elements for how competitive the mechanised method is, are the regional coverage of heating plants and their ability to pay for wood fuel. Within the Bioenergy project Metsaeteho has continued with a project, which focuses on development of the machine and also studies the overall economy of the method, from the viewpoint of wood production

Behavior of pre-irradiated fuel under a simulated RIA condition

International Nuclear Information System (INIS)

Fuketa, Toyoshi; Sasajima, Hideo; Mori, Yukihide

1994-07-01

This report presents results from the power burst experiment with pre-irradiated fuel rod, Test JM-3, conducted in the Nuclear Safety Research Reactor (NSSR). The data concerning test method, pre-irradiation, pre-pulse fuel examination, pulse irradiation, transient records and post-pulse fuel examination are described, and analyses, interpretations, and discussions of the results are presented. Preceding to the pulse irradiation in the NSRR, test fuel rod was irradiated in the Japan Materials Testing Reactor (JMTR) up to a fuel burnup of 19.6MWd/kgU with average linear heat rate of 25.3 kW/m. The fuel rod was subjected to the pulse irradiation resulting in a deposited energy of 174±6 cal/g·fuel and a peak fuel enthalpy of 130±5 cal/g·fuel under stagnant water cooling condition at atmospheric pressure and ambient temperature. Test fuel rod behavior was assessed from pre- and post-pulse fuel examinations and transient records during the pulse. The cladding surface temperature increased to only 150degC, and the test resulted in slight fuel deformation and no fuel failure. An estimated rod-average fission gas release during the transient was about 2.2%. Through the detailed fuel examinations, the information concerning microstructural change in the fuel pellets were also obtained. (author)

WIPP - Pre-Licensing and Operations: Developer and Regulator Perspectives

International Nuclear Information System (INIS)

Peake, Tom; Patterson, R.

2014-01-01

The Waste Isolation Pilot Plant (WIPP) is a disposal system for defense-related transuranic (TRU) radioactive waste. Developed by the Department of Energy (DOE), WIPP is located in Southeastern New Mexico: radioactive waste is disposed of 2,150 feet underground in an ancient layer of salt with a total capacity of 6.2 million cubic feet of waste. Congress authorized the development and construction of WIPP in 1980 for the express purpose of providing a research and development facility to demonstrate the safe disposal of radioactive wastes resulting from the defense activities and programs of the United States. This paper makes a historical review of the site development, site operations (waste disposal operations started in 1999), communications between US EPA and DOE, the chronology of pre-licensing and pre-operations, the operational phase and the regulatory challenges, and the lessons learned after 12 years of operations

Pre-Algebra Essentials For Dummies

CERN Document Server

Zegarelli, Mark

2010-01-01

Many students worry about starting algebra. Pre-Algebra Essentials For Dummies provides an overview of critical pre-algebra concepts to help new algebra students (and their parents) take the next step without fear. Free of ramp-up material, Pre-Algebra Essentials For Dummies contains content focused on key topics only. It provides discrete explanations of critical concepts taught in a typical pre-algebra course, from fractions, decimals, and percents to scientific notation and simple variable equations. This guide is also a perfect reference for parents who need to review critical pre-algebra

Effects of space-relevant radiation on pre-osteoblasts

International Nuclear Information System (INIS)

Hu, Yueyuan

2014-01-01

Until now limited research has been conducted to address the mechanisms leading ionizing radiation exposure induced bone loss. This is relevant for cancer radiotherapy and human spaceflight. Exposure to radiation can result in elevated bone fracture risk in patients receiving cancer radiotherapy. In human spaceflight, astronauts are exposed to space radiation which is a very complex mixture consisting primarily of high-energy charged particles. Osteoblasts are of mesenchymal origin and responsible for creating and maintaining skeletal architecture; these cells produce extracellular matrix proteins and regulators of matrix mineralization during initial bone formation and later bone remodeling. The aim of this work was to investigate the effects of ionizing radiation on pre-osteoblasts including cellular survival, cell cycle regulation and differentiation modification. Experiments with the pre-osteoblast cell line OCT-1 and the mesenchymal stem cell line C3H10T1/2 showed that radiation cell killing depends on dose and linear energy transfer (LET) and is most effective at an LET of ∝150 keV/μm. High-LET radiation has a much more pronounced ability to induce cell cycle arrest in the G2/M phase. After both X-rays and heavy ions exposure, expression of the cell cycle regulator CDKN1A was significantly up-regulated in a dose-dependent manner. The findings suggest that cell cycle regulation is more sensitive to high-LET radiation than cell survival, which is not solely regulated through elevated CDKN1A expression. Radiation exposure enhances osteoblastic differentiation and maturation, and mediates Runx2 and TGF-β1 expression during early differentiation of pre-osteoblasts. Osteogenic differentiation did not alter cellular radiosensitivity, DNA repair of radiation-induced damages and the effects of radiation on proliferation. Further experiments are needed to elucidate possible synergistic effects of microgravity and radiation on osteoblast differentiation. This may

Effects of space-relevant radiation on pre-osteoblasts

Energy Technology Data Exchange (ETDEWEB)

Hu, Yueyuan

2014-02-12

Until now limited research has been conducted to address the mechanisms leading ionizing radiation exposure induced bone loss. This is relevant for cancer radiotherapy and human spaceflight. Exposure to radiation can result in elevated bone fracture risk in patients receiving cancer radiotherapy. In human spaceflight, astronauts are exposed to space radiation which is a very complex mixture consisting primarily of high-energy charged particles. Osteoblasts are of mesenchymal origin and responsible for creating and maintaining skeletal architecture; these cells produce extracellular matrix proteins and regulators of matrix mineralization during initial bone formation and later bone remodeling. The aim of this work was to investigate the effects of ionizing radiation on pre-osteoblasts including cellular survival, cell cycle regulation and differentiation modification. Experiments with the pre-osteoblast cell line OCT-1 and the mesenchymal stem cell line C3H10T1/2 showed that radiation cell killing depends on dose and linear energy transfer (LET) and is most effective at an LET of ∝150 keV/μm. High-LET radiation has a much more pronounced ability to induce cell cycle arrest in the G2/M phase. After both X-rays and heavy ions exposure, expression of the cell cycle regulator CDKN1A was significantly up-regulated in a dose-dependent manner. The findings suggest that cell cycle regulation is more sensitive to high-LET radiation than cell survival, which is not solely regulated through elevated CDKN1A expression. Radiation exposure enhances osteoblastic differentiation and maturation, and mediates Runx2 and TGF-β1 expression during early differentiation of pre-osteoblasts. Osteogenic differentiation did not alter cellular radiosensitivity, DNA repair of radiation-induced damages and the effects of radiation on proliferation. Further experiments are needed to elucidate possible synergistic effects of microgravity and radiation on osteoblast differentiation. This may

Nonlinear collisionless electron cyclotron interaction in the pre-ionisation stage

Science.gov (United States)

Farina, D.

2018-06-01

Electron cyclotron (EC) wave-particle interaction is theoretically investigated in the pre-ionisation phase, much before collisions and other mechanisms can play a role. In the very first phase of a plasma discharge with EC-assisted breakdown, the motion of an electron at room temperature in a static magnetic field under the action of a localised microwave beam is nonlinear, and transition to states of larger energy can occur via wave trapping. Within a Hamiltonian adiabatic formalism, the conditions at which the particles gain energy in single beam crossing are derived in a rigorous way, and the energy variation is characterized quantitatively as a function of the wave frequency, harmonic number, polarisation and EC power and beam width. Estimates of interest for applications to tokamak start-up are obtained for the first, second and third cyclotron harmonic. The investigation confirms that electrons can easily gain energies well above the ionisation energy in most conditions at the first two harmonics, while not at the third harmonic, as observed in experiments.

The Pre-Injector Linac for the Diamond Light Source

CERN Document Server

Christou, C

2004-01-01

The Diamond Light Source is a new medium-energy high brightness synchrotron light facility which is under construction on the Rutherford Appleton Laboratory site in the U.K. The accelerator facility can be divided into three major components; a 3 GeV 561 m circumference storage ring, a full-energy booster synchrotron and a 100 MeV pre-injector linac. This paper describes the linac design and plans for operation. The linac is supplied by ACCEL Instruments GmbH under a turn-key contract, with Diamond Light Source Ltd. providing linac beam diagnostics, control system hardware and standard vacuum components. Commissioning of the linac will take place in early 2005 and user operation of the facility will commence in 2007.

Modification of Bi:YIG film properties by substrate surface ion pre-treatment

Energy Technology Data Exchange (ETDEWEB)

Shaposhnikov, A.N.; Prokopov, A.R.; Karavainikov, A.V.; Berzhansky, V.N.; Mikhailova, T.V. [Taurida National V.I. Vernadsky University, Vernadsky Avenue, 4, Simferopol, 95007 (Ukraine); Kotov, V.A. [V.A. Kotelnikov Institute of Radio Engineering and Electronics, RAS, 11 Mohovaya Street, Moscow, 125009 (Russian Federation); Balabanov, D.E. [Moscow Institute of Physics and Technology, Dolgoprudny, 141700 (Russian Federation); Sharay, I.V.; Salyuk, O.Y. [Institute of Magnetism, NAS of Ukraine, 03142, Kiev (Ukraine); Vasiliev, M. [Electron Science Research Institute, Edith Cowan University, 270 Joondalup Drive, Joondalup 6027 (Australia); Golub, V.O., E-mail: v_o_golub@yahoo.com [Institute of Magnetism, NAS of Ukraine, 03142, Kiev (Ukraine)

2014-07-01

Highlights: • Effects of substrates ion beam treatment on magnetoptical properties Bi:YIG films. • Substrate surface damage results in sign inversion of the magneto-optical effects. • Atomically smooth films growth takes place on low energy ions treated substrates. • High energy ions treatment results in selective nucleation mechanism of the growth. - Abstract: The effect of a controlled ion beam pre-treatment of (1 1 1)-oriented Gd{sub 3}Ga{sub 5}O{sub 12} substrates on the magneto-optical properties and surface morphology of the ultrathin bismuth-substituted yttrium–iron garnet films with a composition Bi{sub 2.8}Y{sub 0.2}Fe{sub 5}O{sub 12} was studied. It has been shown that the observed sign inversion of magneto-optical effects (Faraday rotation and magnetic circular dichroism) observed in films that were deposited on the GGG substrate pre-treated by 1 keV and 4 keV Ar{sup +} ion beams is a result of the substrate surface amorphization caused by the ion bombardment.

Wideroe pre-accelerator for the SuperHILAC

International Nuclear Information System (INIS)

Staples, J.; Alonso, J.; Behrsing, G.; Clark, D.; Grunder, H.; Olivier, M.; Spence, D.; Yourd, R.

1976-09-01

In 1971 the Bevatron successfully accelerated low-intensity heavy ion beams up to neon to energies of 2.1 GeV/amu. More recently, beams up to argon have been accelerated using the SuperHILAC as an injector to the Bevatron--the Bevalac concept. With increasing scientific interest in high-energy high-intensity beams of heavier ions, plans to upgrade both the Bevatron vacuum system and the SuperHILAC ion sources and injectors have been formulated. A proposed new pre-accelerator based on an air-insulated Cockcroft-Walton and a Wideroe linac is presented. The Wideroe linac uses the design concepts established at UNILAC, modified for frequency and energy requirements. U 7 + from the ion source is accelerated from 12 keV/amu to 113 keV/amu and stripped to a mean charge state acceptable to the first tank of the SuperHILAC. The expected intensity improvement over the present pressurized injector is a factor of 100 at the highest masses. The physical modeling of the Wideroe linac structure will be kept to a minimum. Computer models predicting the characteristics of the structure have improved to the point where the probability of satisfactory performance is high

Pre-cementation of deep shaft

Science.gov (United States)

Heinz, W. F.

1988-12-01

Pre-cementation or pre-grouting of deep shafts in South Africa is an established technique to improve safety and reduce water ingress during shaft sinking. The recent completion of several pre-cementation projects for shafts deeper than 1000m has once again highlighted the effectiveness of pre-grouting of shafts utilizing deep slimline boreholes and incorporating wireline technique for drilling and conventional deep borehole grouting techniques for pre-cementation. Pre-cementation of deep shaft will: (i) Increase the safety of shaft sinking operation (ii) Minimize water and gas inflow during shaft sinking (iii) Minimize the time lost due to additional grouting operations during sinking of the shaft and hence minimize costly delays and standing time of shaft sinking crews and equipment. (iv) Provide detailed information of the geology of the proposed shaft site. Informations on anomalies, dykes, faults as well as reef (gold bearing conglomerates) intersections can be obtained from the evaluation of cores of the pre-cementation boreholes. (v) Provide improved rock strength for excavations in the immediate vicinity of the shaft area. The paper describes pre-cementation techniques recently applied successfully from surface and some conclusions drawn for further considerations.

Thermodynamic analysis of application of organic Rankine cycle for heat recovery from an integrated DIR-MCFC with pre-reformer

International Nuclear Information System (INIS)

Vatani, Ali; Khazaeli, Ali; Roshandel, Ramin; Panjeshahi, Mohammad Hassan

2013-01-01

Highlights: ► Using an integrated pre-reformer before feeding a DIR-MCFC is proposed. ► An ORC with different working fluid is used for waste heat recovery from the proposed plant. ► Performance of compound system is evaluated by thermodynamic analysis. ► An improvement on simultaneously heat integration between the units and waste heat recovery is performed. ► Overall energy and exergy efficiencies are found to be 60.45% and 57.75%. - Abstract: This work deals with waste heat recovery from a proposed direct internal reforming molten carbonate fuel cell (DIR-MCFC), including an integrated pre-reformer. In this regard, some advantages are attainable over exhaust gas recycling. For instance, due to low temperature in the pre-reformer, carbon deposition and coke formation resulting from higher hydrocarbons can be eliminated. In this study, the cathode outlet provides the heat requirement for the pre-reforming process. After partial heat recovery from the cathode outlet, the stream still has a considerable energy and exergy (352.55 °C and 83.687 kW respectively). This study investigates waste heat recovery from the proposed DIR-MCFC, using an organic Rankine cycle (ORC) with two different configurations. In the first case, the cathode outlet provides the heat requirement for the pre-reforming process; then, it enters the heat recovery vapor generator of the organic Rankine cycle. In the second case, the cathode outlet is split into two streams for using in an ORC and supplying the pre-reforming process required heat. Several substances are selected as working fluids in order to compare their performance in the waste heat recovery system. The overall results at optimum conditions indicate that the energy and exergy efficiencies of the compound system are increased and its exergy loss is decreased with cathode splitting for all substances (1.1% average over all fluids). It is concluded that cathode splitting has a significant impact on the substances which

Structural motifs of pre-nucleation clusters.

Science.gov (United States)

Zhang, Y; Türkmen, I R; Wassermann, B; Erko, A; Rühl, E

2013-10-07

Structural motifs of pre-nucleation clusters prepared in single, optically levitated supersaturated aqueous aerosol microparticles containing CaBr2 as a model system are reported. Cluster formation is identified by means of X-ray absorption in the Br K-edge regime. The salt concentration beyond the saturation point is varied by controlling the humidity in the ambient atmosphere surrounding the 15-30 μm microdroplets. This leads to the formation of metastable supersaturated liquid particles. Distinct spectral shifts in near-edge spectra as a function of salt concentration are observed, in which the energy position of the Br K-edge is red-shifted by up to 7.1 ± 0.4 eV if the dilute solution is compared to the solid. The K-edge positions of supersaturated solutions are found between these limits. The changes in electronic structure are rationalized in terms of the formation of pre-nucleation clusters. This assumption is verified by spectral simulations using first-principle density functional theory and molecular dynamics calculations, in which structural motifs are considered, explaining the experimental results. These consist of solvated CaBr2 moieties, rather than building blocks forming calcium bromide hexahydrates, the crystal system that is formed by drying aqueous CaBr2 solutions.

Thermodynamic analysis and economic evaluation of a 1000 MW bituminous coal fired power plant incorporating low-temperature pre-drying (LTPD)

International Nuclear Information System (INIS)

Xu, Cheng; Xu, Gang; Zhu, Mingming; Dong, Wei; Zhang, Yang; Yang, Yongping; Zhang, Dongke

2016-01-01

Highlights: • An improved design of coal pre-drying using flue gas waste heat was proposed. • 0.4% energy efficiency increase was achieved with the proposed system. • The additional net economic benefit of the proposed system is $1.91 M per year. • Proposed concept can be widely applied to improve coal-fired power plant efficiency. - Abstract: Low-temperature pre-drying (LTPD) of lignite has been identified as an effective approach to improve the efficiency of lignite fired power plants. In this study, an improved concept for the pre-drying of medium moisture bituminous coals using flue gas waste heat was proposed and its feasibility was assessed. In the proposed configuration, the boiler exhaust flue gas is drawn to dryers to heat and pre-dry the raw coal, removing a large proportion of the coal moisture and leading to an improvement in the energy efficiency of the power plant. Thermodynamic analysis and economic evaluation were performed based on a typical 1000 MW bituminous coal fired power plant incorporating the proposed LTPD concept. The results showed that the net power plant efficiency gain is as much as 0.4 percentage point with additional net power output of 9.3 MW as compared to the reference plant without coal pre-drying. This was attributed to the reduction in the moisture content from 10.3 to 2.7 wt%. The additional net economic benefit attained due to the coal pre-drying was estimated to reach $1.91 M per year. This work provides a broadly applicable and economically feasible approach to further improve the energy efficiency of power plants firing coals with medium moisture contents.

Renewable sea energies - The industrial Meccano is underway. Environment: in the jungle of stationary energy storage

International Nuclear Information System (INIS)

Lescuyer, Thibault

2015-01-01

A first article proposes an overview of the current developments in the field of renewable sea energies where floating wing turbines, wave energy, sea current energy, or sea thermal energy seem to be promising solutions but are still at a pre-industrial stage of development. The article presents different projects and comments their successes and failures. Some innovating and important actors are briefly presented: STX France, DCNS, IDEOL, Nenuphar and EOLR. A second article comments the situation of the energy stationary storage sector which still requires viable economic models and more innovations. Different technologies and projects and the involved actors are evoked: plants of energy transfer by pumping (STEP), hydrogen-based electrochemical storage, and lithium-ion batteries

Prevalence of pre-diabetes, diabetes, pre-hypertension, and hypertension in children weighing more than normal

Directory of Open Access Journals (Sweden)

Priti Phatale

2012-01-01

Full Text Available Aim: Prevalence of pre-diabetes, diabetes, pre-hypertension (pre-HT, and hypertension (HT in children weighing more than normal. Materials and Methods: Three- to eighteen-year old children weighing more than normal were included. Pathological short children were excluded. According to Centre for Disease Control (CDC, children are grouped into overweight (OW and obese (OB. Indian B.P. reference tables are used for defining HT and pre-HT. [2] HbA1c by HPLC (BIO RAD method was used to define pre-diabetes and diabetes. [3] Children with HbA1c ≥6.5 were subjected for Glucose Tolerance Test (GTT. C-peptide assay was done to rule out (r/o IDDM. Observations: When we compare this with our earlier presentation at PEDICON 2011, we found that hypertension (HTN (22.9% vs. 23.07% is not significantly different but pre-HTN (28.09% vs. 33.9%, pre-diabetes mellitus (pre-DM (3.7% vs. 64.3%, and diabetes mellitus (DM (0.35% vs. 3.8% are significantly high in this study. Conclusion: (1 Prevalence of HT (22.90% vs. 23.07% is similar in both groups but pre-HT (33.9% vs. 28.09% is high in this study. (2 Significant rise in prevalence of diabetes (3.84% vs. 0.35% and pre-diabetes (64.33% vs. 3.7% is seen in this study. (3 This change is because of using HbA1c as screening tool in children weighing more than normal.

Pre-test evaluation of LLTR Series II Test A-6

International Nuclear Information System (INIS)

Knittle, D.

1980-11-01

Purpose of this report is to present pre-test predictions of pressure histories for the A6 test to be conducted in the Large Leak Test Facility (LLTF) at the Energy Technology Engineering Center. A6 is part of a test program being conducted to evaluate the effects of leaks produced by a double-ended guillotine rupture of a single tube. A6 will provide data on the CRBR prototypical double rupture disc performance

Support for solar energy collectors

Science.gov (United States)

Cole, Corey; Ardell-Smith, Zachary; Ciasulli, John; Jensen, Soren

2016-11-01

A solar energy collection system can include support devices configured to accommodate misalignment of components during assembly. For example, the system can include piles fixed to the earth and an adjustable bearing assembly at the upper end of the pile. The adjustable bearing assembly can include at least one of a vertical adjustment device, a lateral adjustment device and an angular adjustment device. The solar energy collection system can also include a plurality of solar energy collection device pre-wired together and mounted to a support member so as to form modular units. The system can also include enhanced supports for wire trays extending between rows of solar energy collection devices.

Pre-Algebra Lexicon.

Science.gov (United States)

Hayden, Dunstan; Cuevas, Gilberto

The pre-algebra lexicon is a set of classroom exercises designed to teach the technical words and phrases of pre-algebra mathematics, and includes the terms most commonly found in related mathematics courses. The lexicon has three parts, each with its own introduction. The first introduces vocabulary items in three groups forming a learning…

Do pre-drinkers consume more alcohol than non-pre-drinkers on an event-specific night out?

DEFF Research Database (Denmark)

Østergaard, Jeanette; Skov, Peter Rohde

2014-01-01

Introduction and Aims Young people drinking heavily before going out to bars and clubs is associated with alcohol-related harm and therefore of great public concern. This study examines whether pre-drinkers consume more alcohol than non-pre-drinkers on an event-specific night out in England...... demographics, socioeconomic status, frequency of intoxication and alcohol unit intake before and during the young people's night out. Results A mixed linear model performed on the panel mobile survey shows that pre-drinkers in England and Denmark consume 9.185 (P ..., respectively, more than the non-pre-drinkers. However, in both countries pre-drinkers consume 3.430 (P alcohol on-premises than the non-pre-drinkers. Discussion and Conclusion Pre-drinking is a widespread phenomenon in England and Denmark, with more than half of young...

Metabolic and hormonal signatures in pre-manifest and manifest Huntington’s disease patients

Directory of Open Access Journals (Sweden)

Rui eWang

2014-06-01

Full Text Available Huntington's disease (HD is an inherited neurodegenerative disorder typified by involuntary body movements, and psychiatric and cognitive abnormalities. Many HD patients also exhibit metabolic changes including progressive weight loss and appetite dysfunction. Here we have investigated metabolic function in pre-manifest and manifest HD subjects to establish an HD subject metabolic hormonal plasma signature. Individuals at risk for HD who have had predictive genetic testing showing the cytosine-adenine-guanine (CAG expansion causative of HD, but who do not yet present signs and symptoms sufficient for the diagnosis of manifest HD are said to be pre-manifest. Pre-manifest and manifest HD patients, as well as both familial and non-familial controls, were evaluated for multiple peripheral metabolism signals including circulating levels of hormones, growth factors, lipids and cytokines. Both pre-manifest and manifest HD subjects exhibited significantly reduced levels of circulating growth factors, including growth hormone and prolactin. HD-related changes in the levels of metabolic hormones such as ghrelin, glucagon and amylin were also observed. Total cholesterol, HDL-C and LDL-C were significantly decreased in HD subjects. C-reactive protein was significantly elevated in pre-manifest HD subjects. The observation of metabolic alterations, even in subjects considered to be in the pre-manifest stage of HD, suggests that in addition, and prior, to overt neuronal damage, HD affects metabolic hormone secretion and energy regulation, which may shed light on pathogenesis, and provide opportunities for biomarker development.

Changes in cognitive control in pre-manifest Huntington's disease examined using pre-saccadic EEG potentials - a longitudinal study.

Science.gov (United States)

Ness, Vanessa; Bestgen, Anne-Kathrin; Saft, Carsten; Beste, Christian

2014-01-01

It is well-known that Huntington's disease (HD) affects saccadic processing. However, saccadic dysfunctions in HD may be seen as a result of dysfunctional processes occurring at the oculomotor level prior to the execution of saccades, i.e., at a pre-saccadic level. Virtually nothing is known about possible changes in pre-saccadic processes in HD. This study examines pre-saccadic processing in pre-manifest HD gene mutation carriers (pre-HDs) by using clinically available EEG measures. Error rates, pre-saccadic EEG potentials and saccade onset EEG potentials were measured in 14 pre-HDs and case-matched controls performing prosaccades and antisaccades in a longitudinal study over a 15-month period. The results show that pre-saccadic potentials were changed in pre-HDs, relative to controls and also revealed changes across the 15-month longitudinal period. In particular, pre-saccadic ERP in pre-HDs were characterized by lower amplitudes and longer latencies, which revealed longitudinal changes. These changes were observed for anti-saccades, but not for pro-saccades. Overt saccadic trajectories (potentials) were not different to those in controls, showing that pre-saccadic processes are sensitive to subtle changes in fronto-striatal networks in pre-HDs. Deficits in pre-saccadic processes prior the execution of an erroneous anti-saccade can be seen as an effect of dysfunctional cognitive control in HD. This may underlie saccadic abnormalities and hence a major phenotype of HD. Pre-saccadic EEG potentials preceding erroneous anti-saccades are sensitive to pre-manifest disease progression in HD.

Pre-hospital critical care by anaesthesiologist-staffed pre-hospital services in Scandinavia

DEFF Research Database (Denmark)

Krüger, A J; Lossius, H M; Mikkelsen, S

2013-01-01

All Scandinavian countries provide anaesthesiologist-staffed pre-hospital services. Little is known of the incidence of critical illness or injury attended by these services. We aimed to investigate anaesthesiologist-staffed pre-hospital services in Scandinavia with special emphasis on incidence...

Microphone directionality, pre-emphasis filter, and wind noise in cochlear implants.

Science.gov (United States)

Chung, King; McKibben, Nicholas

2011-10-01

Wind noise can be a nuisance or a debilitating masker for cochlear implant users in outdoor environments. Previous studies indicated that wind noise at the microphone/hearing aid output had high levels of low-frequency energy and the amount of noise generated is related to the microphone directionality. Currently, cochlear implants only offer either directional microphones or omnidirectional microphones for users at-large. As all cochlear implants utilize pre-emphasis filters to reduce low-frequency energy before the signal is encoded, effective wind noise reduction algorithms for hearing aids might not be applicable for cochlear implants. The purposes of this study were to investigate the effect of microphone directionality on speech recognition and perceived sound quality of cochlear implant users in wind noise and to derive effective wind noise reduction strategies for cochlear implants. A repeated-measure design was used to examine the effects of spectral and temporal masking created by wind noise recorded through directional and omnidirectional microphones and the effects of pre-emphasis filters on cochlear implant performance. A digital hearing aid was programmed to have linear amplification and relatively flat in-situ frequency responses for the directional and omnidirectional modes. The hearing aid output was then recorded from 0 to 360° at flow velocities of 4.5 and 13.5 m/sec in a quiet wind tunnel. Sixteen postlingually deafened adult cochlear implant listeners who reported to be able to communicate on the phone with friends and family without text messages participated in the study. Cochlear implant users listened to speech in wind noise recorded at locations that the directional and omnidirectional microphones yielded the lowest noise levels. Cochlear implant listeners repeated the sentences and rated the sound quality of the testing materials. Spectral and temporal characteristics of flow noise, as well as speech and/or noise characteristics before

Superconducting magnetic energy storage for the disposal of fast reserve energy at the electrical energy supply. Supraleitende Energiespeicher zur Bereitstellung schneller Reserveleistung in der elektrischen Energieversorgung

Energy Technology Data Exchange (ETDEWEB)

Bayer, W [Siemens AG, Erlangen (Germany); Bittihn, R [Varta AG, Hagen (Germany); Kuerten, H [Siemens AG, Erlangen (Germany); Radtke, U [PreussenElektra AG, Hannover (Germany); Taube, W [PreussenElektra AG, Hannover (Germany); Vollmar, H E [Siemens AG, Erlangen (Germany); Willmes, H [Varta Batterie AG, Hagen (Germany)

1994-04-05

The authors investigate the economic efficiency of the application of a superconducting magnetic energy storage (SMES) in the field of electrical energy supply taking as example a network of 10 000 MW which is operated in an European interconnected power system. In case of this network the supply of the second reserve energy has become an interesting example of application, especially combined with the disconnection of the pre-heater. The application of SMES could lead to a better utilisation of existing power stations and the fuels along with a reduction of emissions. (orig.)

Validation of an Online Food Frequency Questionnaire against Doubly Labelled Water and 24 h Dietary Recalls in Pre-School Children.

Science.gov (United States)

Delisle Nyström, Christine; Henriksson, Hanna; Alexandrou, Christina; Bergström, Anna; Bonn, Stephanie; Bälter, Katarina; Löf, Marie

2017-01-13

The development of easy-to-use and accurate methods to assess the intake of energy, foods and nutrients in pre-school children is needed. KidMeal-Q is an online food frequency questionnaire developed for the LifeGene prospective cohort study in Sweden. The aims of this study were to compare: (i) energy intake (EI) obtained using KidMeal-Q to total energy expenditure (TEE) measured via doubly labelled water and (ii) the intake of certain foods measured using KidMeal-Q to intakes acquired by means of 24 h dietary recalls in 38 children aged 5.5 years. The mean EI calculated using KidMeal-Q was statistically different ( p food frequency questionnaires. However, its accuracy needs to be improved before it can be used in studies in pre-school children.

Energy Requirements for Biomass Harvest and Densification

Directory of Open Access Journals (Sweden)

Kevin Shinners

2018-03-01

Full Text Available This research quantified the unit and bulk density of several biomass crops across a variety of harvest and processing methods, as well as the energy and fuel requirements for these operations. A load density of approximately 240 kg·m−3 is needed to reach the legal weight limit of most transporters. Of the three types of balers studied, only the high density (HD large square baler achieved this target density. However, the specific energy and fuel requirements increased exponentially with bale density, and at the maximum densities for corn stover and switchgrass, the dry basis energy and fuel requirements ranged from 4.0 to 5.0 kW·h·Mg−1 and 1.2 to 1.4 L·Mg−1, respectively. Throughputs of tub grinders when grinding bales was less than any other harvesting or processing methods investigated, so specific energy and fuel requirements were high and ranged from 13 to 32 kW·h·Mg−1 and 5.0 to 11.3 L·Mg−1, respectively. Gross size-reduction by pre-cutting at baling increased bale density by less than 6% and increased baling energy requirements by 11% to 22%, but pre-cut bales increased the tub grinder throughput by 25% to 45% and reduced specific fuel consumption for grinding by 20% to 53%. Given the improvement in tub grinder operation, pre-cutting bales should be considered as a means to increase grinder throughput. Additional research is needed to determine the energy required to grind high density pre-cut bales at high throughputs so that better estimates of total energy required for a high density bale system can be made. An alternative bulk feedstock system was investigated that involved chopping moist biomass crops with a precision-cut forage harvester, compacting the bulk material in a silo bag, and then segmenting the densified material into modules optimized for efficient transport. The specific fuel use for chopping and then compacting biomass crops in the silo bag ranged from 1.6 to 3.0 L·Mg−1 and 0.5 to 1.3 L·Mg−1

Teaching on ocean-wave-energy conversion

Energy Technology Data Exchange (ETDEWEB)

Falnes, J. [Norges teknisk-naturvitskaplege univ., Inst. for fysikk, Trondheim (Norway)

2001-07-01

Ocean-wave energy utilisation has for 27 years been a university research subject, in which the author has been active from the first year. In this paper he presents some information related to his teaching on the subject during many of these years. This includes teaching on the pre-university level and, in particular, development of the wave-energy module for an educational CD-ROM on sustainable technology and renewable energy. Education of the general public is very important. On the other hand teaching of doctor students and other wave-energy researchers is also a subject of the paper. (au)

US energy policy

International Nuclear Information System (INIS)

Katz, J.E.

1984-01-01

After three years in power, the Reagan Administration has been able to reverse much of the US federal government's energy policy measures that had occurred since 1973, particularly the build-up that took place during the Carter presidency. Another change is a repudiation of social equity concerns, which were an important part of the energy policies of the Nixon, Ford and Carter presidencies. Instead of using government to direct energy policy, the Reagan Administration has stressed the pre-eminence of the private sector. One exception is nuclear energy, which the Administration strongly supports. While the Reagan policies implemented have increased economic efficiency and reduced federal-related budgets and staffs, they have caused environmental degradation and hardship on the poor. Yet their greatest implication is that of a nation less well prepared to handle a severe energy shortage. The Administration believes this is not a problem, based on its optimistic expectations of the extent of untapped resources worldwide and the resilience of the free market. (author)

In situ longitudinal pre-stretch in the human femoropopliteal artery.

Science.gov (United States)

Kamenskiy, Alexey; Seas, Andreas; Bowen, Grant; Deegan, Paul; Desyatova, Anastasia; Bohlim, Nick; Poulson, William; MacTaggart, Jason

2016-03-01

In situ longitudinal (axial) pre-stretch (LPS) plays a fundamental role in the mechanics of the femoropopliteal artery (FPA). It conserves energy during pulsation and prevents buckling of the artery during limb movement. We investigated how LPS is affected by demographics and risk factors, and how these patient characteristics associate with the structural and physiologic features of the FPA. LPS was measured in n=148 fresh human FPAs (14-80 years old). Mechanical properties were characterized with biaxial extension and histopathological characteristics were quantified with Verhoeff-Van Gieson Staining. Constitutive modeling was used to calculate physiological stresses and stretches which were then analyzed in the context of demographics, risk factors and structural characteristics. Age had the strongest negative effect (r=-0.812, p<0.01) on LPS and could alone explain 66% of LPS variability. Male gender, higher body mass index, hypertension, diabetes, coronary artery disease, dyslipidemia and tobacco use had negative effects on LPS, but only the effect of tobacco was not associated with aging. FPAs with less pre-stretch had thicker medial layers, but thinner intramural elastic fibers with less dense and more fragmented external elastic laminae. Elastin degradation was associated with decreased physiological tethering force and longitudinal stress, while circumferential stress remained constant. FPA wall pathology was negatively associated with LPS (r=-0.553, p<0.01), but the effect was due primarily to aging. LPS in the FPA may serve as an energy reserve for adaptive remodeling. Reduction of LPS due to degradation and fragmentation of intramural longitudinal elastin during aging can be accelerated in tobacco users. This work studies in situ longitudinal pre-stretch (LPS) in the human femoropopliteal artery. LPS has a fundamental role in arterial mechanics, but is rather poorly studied due to lack of direct in vivo measurement method. We have investigated LPS in

An interdisciplinary approach to study Pre-Earthquake processes

Science.gov (United States)

Ouzounov, D.; Pulinets, S. A.; Hattori, K.; Taylor, P. T.

2017-12-01

We will summarize a multi-year research effort on wide-ranging observations of pre-earthquake processes. Based on space and ground data we present some new results relevant to the existence of pre-earthquake signals. Over the past 15-20 years there has been a major revival of interest in pre-earthquake studies in Japan, Russia, China, EU, Taiwan and elsewhere. Recent large magnitude earthquakes in Asia and Europe have shown the importance of these various studies in the search for earthquake precursors either for forecasting or predictions. Some new results were obtained from modeling of the atmosphere-ionosphere connection and analyses of seismic records (foreshocks /aftershocks), geochemical, electromagnetic, and thermodynamic processes related to stress changes in the lithosphere, along with their statistical and physical validation. This cross - disciplinary approach could make an impact on our further understanding of the physics of earthquakes and the phenomena that precedes their energy release. We also present the potential impact of these interdisciplinary studies to earthquake predictability. A detail summary of our approach and that of several international researchers will be part of this session and will be subsequently published in a new AGU/Wiley volume. This book is part of the Geophysical Monograph series and is intended to show the variety of parameters seismic, atmospheric, geochemical and historical involved is this important field of research and will bring this knowledge and awareness to a broader geosciences community.

France's energy balance in 2011

International Nuclear Information System (INIS)

Rouquette, Celine; Moreau, Sylvain; Bottin, Anne; Reperant, Patricia; Grosset, Catherine

2012-07-01

2011 was marked by the continued increase in energy prices, raising the country's energy bill and weighing on the activity of businesses and on household budgets. The effect on households was, however, mitigated by the exceptionally mild weather conditions in 2011, which reduced needs for heating. Corrected for climate variations, primary energy consumption increased slightly, its level remaining below pre-crisis ones. Final energy consumption was stable, resulting from contrasting changes: decrease in industry, construction and agriculture, in spite of higher output, and increase in the service, residential and transport sectors. National primary energy production increased in 2011, reaching a new record close to 139 Mtoe. It benefited from high levels of nuclear and wind generated electricity. Conversely, energy production from several key renewable sources - hydro, fuelwood and biofuels - saw a downward trend. (authors)

Some successful financing mechanisms for energy efficiency projects (EE) and projects using renewable energy sources (RES) - the experience of Bulgaria

International Nuclear Information System (INIS)

Uzunova, Boriana

2004-01-01

The paper analysis some of the most promising financial mechanisms for energy efficiency (EE) and renewable energy sources (RES) projects in Bulgaria - the TPF mechanism, the KIDS Fund, delivered by the EBRD fund the EE fund of the WB, established on the floor of the EE act, as well as a number of some of the pre accession and European energy programs used for financing this area. All data its rich intensive international and in -home work in the are of energy efficiency and renewable energy sources. (Author)

Radiation safety study for conventional facility and siting pre project phase of International Linear Collider

International Nuclear Information System (INIS)

Sanami, Toshiya; Ban, Syuichi; Sasaki, Shin-ichi

2015-01-01

The International Linear Collider (ILC) is a proposed high-energy collider consisting of two linear accelerators, two dumping rings, electron and positron sources, and a single colliding hall with two detectors. The total length and CMS energy of the ILC will be 31 km and 500 GeV, respectively (and 50 km and 1 TeV after future upgrade). The design of the ILC has entered the pre-project phase, which includes site-dependent design. Radiation safety design for the ILC is on-going as a part of conventional facility and siting activities of the pre-project phase. The thickness of a central wall of normal concrete is designed to be 3.5 m under a pessimistic assumption of beam loss. The beam loss scenario is under discussion. Experience and knowledge relating to shielding design and radiation control operational work at other laboratories are required. (authors)

Energy trends and the water-energy binomium for Brazil.

Science.gov (United States)

Da Rocha, Gisele O; Dos Anjos, Jeancarlo P; De Andrade, Jailson B

2015-01-01

According to the demands of energy saving and carbon emission reduction, the water vs. energy nexus has become a major concern worldwide. Brazil occupies a singular position in the global energy system. A major portion of the Brazilian occupancies has electricity and the energy system expansion that, at first, possesses adequate means for supporting the economic growing may experience some turnovers. The Brazil determination through alternative fuels was a natural choice, given its large hydropower potential and land agricultural base. In the transportation sector Brazil has developed its energy matrix towards an important rate of ethanol and biodiesel. Although those fuels are low carbon emitter, they may probably not be an affordable alternative regarding land use, food security and water footprint. In this way, considering the recent advances in the exploration of oil from Pre-salt (9-15 million barrels) and the discovery of shale gas wells up to 245 tcf, together to unfavorable social and environmental issues associated to biofuels, the Brazilian energy matrix might turn back to the fossil fuels again. These represent challenges to the Brazilian policymakers and how they will be solved will reflect not only in Brazil but also to the world at large.

Enhanced shock wave generation via pre-breakdown acceleration using water electrolysis in negative streamer pulsed spark discharges

Science.gov (United States)

Lee, Kern; Chung, Kyoung-Jae; Hwang, Y. S.

2018-03-01

This paper presents a method for enhancement of shock waves generated from underwater pulsed spark discharges with negative (anode-directed) subsonic streamers, for which the pre-breakdown process is accelerated by preconditioning a gap with water electrolysis. Hydrogen microbubbles are produced at the cathode by the electrolysis and move towards the anode during the preconditioning phase. The numbers and spatial distributions of the microbubbles vary with the amplitude and duration of each preconditioning pulse. Under our experimental conditions, the optimum pulse duration is determined to be ˜250 ms at a pulse voltage of 400 V, where the buoyancy force overwhelms the electric force and causes the microbubbles to be swept out from the water gap. When a high-voltage pulse is applied to the gap just after the preconditioning pulse, the pre-breakdown process is significantly accelerated in the presence of the microbubbles. At the optimum preconditioning pulse duration, the average breakdown delay is reduced by 87% and, more importantly, the energy consumed during the pre-breakdown period decreases by 83%. This reduced energy consumption during the pre-breakdown period, when combined with the morphological advantages of negative streamers, such as thicker and longer stalks, leads to a significant improvement in the measured peak pressure (˜40%) generated by the underwater pulsed spark discharge. This acceleration of pre-breakdown using electrolysis overcomes the biggest drawback of negative subsonic discharges, which is slow vapor bubble formation due to screening effects, and thus enhances the efficiency of the shock wave generation process using pulsed spark discharges in water.

Simulations of iron K pre-edge X-ray absorption spectra using the restricted active space method.

Science.gov (United States)

Guo, Meiyuan; Sørensen, Lasse Kragh; Delcey, Mickaël G; Pinjari, Rahul V; Lundberg, Marcus

2016-01-28

The intensities and relative energies of metal K pre-edge features are sensitive to both geometric and electronic structures. With the possibility to collect high-resolution spectral data it is important to find theoretical methods that include all important spectral effects: ligand-field splitting, multiplet structures, 3d-4p orbital hybridization, and charge-transfer excitations. Here the restricted active space (RAS) method is used for the first time to calculate metal K pre-edge spectra of open-shell systems, and its performance is tested against on six iron complexes: [FeCl6](n-), [FeCl4](n-), and [Fe(CN)6](n-) in ferrous and ferric oxidation states. The method gives good descriptions of the spectral shapes for all six systems. The mean absolute deviation for the relative energies of different peaks is only 0.1 eV. For the two systems that lack centrosymmetry [FeCl4](2-/1-), the ratios between dipole and quadrupole intensity contributions are reproduced with an error of 10%, which leads to good descriptions of the integrated pre-edge intensities. To gain further chemical insight, the origins of the pre-edge features have been analyzed with a chemically intuitive molecular orbital picture that serves as a bridge between the spectra and the electronic structures. The pre-edges contain information about both ligand-field strengths and orbital covalencies, which can be understood by analyzing the RAS wavefunction. The RAS method can thus be used to predict and rationalize the effects of changes in both the oxidation state and ligand environment in a number of hard X-ray studies of small and medium-sized molecular systems.

Minimizing scatter-losses during pre-heat for magneto-inertial fusion targets

Science.gov (United States)

Geissel, Matthias; Harvey-Thompson, Adam J.; Awe, Thomas J.; Bliss, David E.; Glinsky, Michael E.; Gomez, Matthew R.; Harding, Eric; Hansen, Stephanie B.; Jennings, Christopher; Kimmel, Mark W.; Knapp, Patrick; Lewis, Sean M.; Peterson, Kyle; Schollmeier, Marius; Schwarz, Jens; Shores, Jonathon E.; Slutz, Stephen A.; Sinars, Daniel B.; Smith, Ian C.; Speas, C. Shane; Vesey, Roger A.; Weis, Matthew R.; Porter, John L.

2018-02-01

The size, temporal and spatial shape, and energy content of a laser pulse for the pre-heat phase of magneto-inertial fusion affect the ability to penetrate the window of the laser-entrance-hole and to heat the fuel behind it. High laser intensities and dense targets are subject to laser-plasma-instabilities (LPI), which can lead to an effective loss of pre-heat energy or to pronounced heating of areas that should stay unexposed. While this problem has been the subject of many studies over the last decades, the investigated parameters were typically geared towards traditional laser driven Inertial Confinement Fusion (ICF) with densities either at 10% and above or at 1% and below the laser's critical density, electron temperatures of 3-5 keV, and laser powers near (or in excess of) 1 × 1015 W/cm2. In contrast, Magnetized Liner Inertial Fusion (MagLIF) [Slutz et al., Phys. Plasmas 17, 056303 (2010) and Slutz and Vesey, Phys. Rev. Lett. 108, 025003 (2012)] currently operates at 5% of the laser's critical density using much thicker windows (1.5-3.5 μm) than the sub-micron thick windows of traditional ICF hohlraum targets. This article describes the Pecos target area at Sandia National Laboratories using the Z-Beamlet Laser Facility [Rambo et al., Appl. Opt. 44(12), 2421 (2005)] as a platform to study laser induced pre-heat for magneto-inertial fusion targets, and the related progress for Sandia's MagLIF program. Forward and backward scattered light were measured and minimized at larger spatial scales with lower densities, temperatures, and powers compared to LPI studies available in literature.

Pre-test analyses for the NESC1 spinning cylinder experiment

International Nuclear Information System (INIS)

Fokkens, J.H.

1995-10-01

The spinning cylinder experiment organised by the Network for the Evaluation of Steel Components (NESC) is designed to investigate the cleavage initiation behaviour of both surface breaking and subclad defects in simulated end of life RPV material, exposed to a pressurised thermal shock transient. Pre-test structural integrity assessments are performed by the NESC Structural Analysis Task Group (TG3). The results of these structural integrity assessments are used to determine the design of the experiment and especially the sizes of the introduced defects. In this report the results of the pre-test analyses performed by the group Applied Mechanics at ECN - Nuclear Energy are described. Elastic as well as elasto-plastic structural analyses are performed for a surface breaking and a subclad defect in a forged cylinder with a 4 mm cladding. The semi elliptical defects have a depth of 40 mm and an aspect ratio of 1:3. (orig.)

ASK Procedure for Instrumented Pre-cracked Charpy-Type Tests

International Nuclear Information System (INIS)

Varga, T.; Njo, D.H.; Prantl, G.

1981-01-01

The essential technical content of the ASK procedure originated from development work in Switzerland since 1963, and practical experiences gained since 1972. The remainder of the content and the format of the procedure are based on the ASTM E 24.03.03. (Tentative Draft Copy) 'Proposed Method for Pre-cracked Charpy Impact and Slow-Bend Testing of Metallic Materials' by C. E. Harbower, 1973. Two different velocities, 5 m/s and 0.1 m/s were used with a Schnadt-type machine of rigid construction. The stiffness of the machine proved to be very suitable for instrumented testing. The instrumented Schnadt-Type machine was equipped with strain gauges both on the top of the pendulum and on the chisel. A static force calibration was followed by energy calibration, comparing potential energy losses with the area under the force-deflection curve. Deflection was measured using a high frequency eddy current method on the pendulum, and for slow testing by means of an inductive gauge on the chisel. Charpy-Type specimens of 1.0 mm max notch depth and 0.12 mm max notch radius were pre-cracked using a resonant fatigue testing machine, or an eccentric drive machine. Crack propagation rate da/dN was measured using 'Russenberger' measuring gauges. In addition a new technique for the detection of dynamic crack initiation, developed at the Institute of Research and Technology (TVFA) in Vienna is discussed and some results presented

Preliminary thermal-hydraulic and structural strength analyses for pre-moderator of cold moderator

International Nuclear Information System (INIS)

Aso, Tomokazu; Kaminaga, Masanori; Terada, Atsuhiko; Hino, Ryutaro

2001-08-01

A light-water cooled pre-moderator with a thin-walled structure made of aluminum alloy is installed around a liquid hydrogen moderator in order to enhance the neutron performance of a MW-scale spallation target system which is being developed in the Japan Atomic Energy Research Institute (JAERI). Since the pre-moderator is needed to be located close to a target working as a neutron source, it is indispensable to remove nuclear heat deposition in the pre-moderator effectively by means of smooth water flow without flow stagnation. Also, the structural integrity of the thin-walled structure should be kept against the water pressure. Preliminary thermal-hydraulic analytical results showed that the water temperature rise could be suppressed less than 1degC while keeping the smooth water flow, which would assure the expected neutron performance. As for the structural integrity, several measures to meet allowable stress conditions of aluminum alloy were proposed on the basis of the preliminary structural strength analyses. (author)

Energy efficiency in buildings. Manual for municipalities [in the Netherlands]; Energie prestatie gebouwen. Handboek gemeenten

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-06-15

New buildings must meet requirements in terms of energy efficiency, expressed in the Energy Performance Coefficient (EPC). Municipalities must pre-test on the basis of calculations. There are two new tools, set up by the NL Agency, by means of which the tests can be performed: this handbook for municipalities and a software program [Dutch] Nieuwe gebouwen moeten aan eisen voldoen qua energiezuinigheid, uitgedrukt in de Energie Prestatie Coefficient (EPC). Gemeenten moeten vooraf toetsen aan de hand van berekeningen. Er zijn twee vernieuwde hulpmiddelen van het Agentschap.nl waarmee de toesting kan plaatsvinden: dit handboek voor gemeenten en een softwareprogramma.

Solar energy in buildings solved by building information modeling

Science.gov (United States)

Chudikova, B.; Faltejsek, M.

2018-03-01

Building lead us to use renewable energy sources for all types of buildings. The use of solar energy is the alternatives that can be applied in a good ratio of space, price, and resultant benefits. Building Information Modelling is a modern and effective way of dealing with buildings with regard to all aspects of the life cycle. The basis is careful planning and simulation in the pre-investment phase, where it is possible to determine the effective result and influence the lifetime of the building and the cost of its operation. By simulating, analysing and insert a building model into its future environment where climate conditions and surrounding buildings play a role, it is possible to predict the usability of the solar energy and establish an ideal model. Solar systems also very affect the internal layout of buildings. Pre-investment phase analysis, with a view to future aspects, will ensure that the resulting building will be both low-energy and environmentally friendly.

JPP: A Java Pre-Processor

OpenAIRE

Kiniry, Joseph R.; Cheong, Elaine

1998-01-01

The Java Pre-Processor, or JPP for short, is a parsing pre-processor for the Java programming language. Unlike its namesake (the C/C++ Pre-Processor, cpp), JPP provides functionality above and beyond simple textual substitution. JPP's capabilities include code beautification, code standard conformance checking, class and interface specification and testing, and documentation generation.

CHARACTERIZATIONS OF FUZZY SOFT PRE SEPARATION AXIOMS

OpenAIRE

El-Latif, Alaa Mohamed Abd

2015-01-01

− The notions of fuzzy pre open soft sets and fuzzy pre closed soft sets were introducedby Abd El-latif et al. [2]. In this paper, we continue the study on fuzzy soft topological spaces andinvestigate the properties of fuzzy pre open soft sets, fuzzy pre closed soft sets and study variousproperties and notions related to these structures. In particular, we study the relationship betweenfuzzy pre soft interior fuzzy pre soft closure. Moreover, we study the properties of fuzzy soft pre regulars...

Technological change of the energy innovation system: From oil-based to bio-based energy

International Nuclear Information System (INIS)

Wonglimpiyarat, Jarunee

2010-01-01

This paper concerns the structural developments and the direction of technological change of the energy innovation system, based on the studies of Kuhn's model of scientific change and Schumpeter's model of technological change. The paper uses the case study of Thai government agencies for understanding the way governments can facilitate technological innovation. The analyses are based on a pre-foresight exercise to examine the potential of the bio-based energy and investigate a set of development policies necessary for the direction of energy system development. The results have shown that bio-based energy is seen as the next new wave for future businesses and one of the solutions to the problem of high oil prices to improve the world's economic security and sustainable development. (author)

Economical analysis of the spray drying process by pre-dehumidification of the inlet air

Energy Technology Data Exchange (ETDEWEB)

Madeira, A.N.; Camargo, J.R. [University of Taubate (UNITAU), SP (Brazil). Mechanical Engineering Dept.

2009-07-01

Spray drying is a dehumidification process by atomization in a closed chamber that aims to remove moisture of a product by heat and mass transfer from the product's contained water to the air that, in this process is previously heated. This paper presents a case study for an industry that produces food ingredients. The current process applied in the product to heat the air can uses one of these two systems: a direct heating process that burns liquid petroleum gas in contact with the inlet air or indirect heating that uses a heat exchanger which heat the air. This heating system consumes 90% of the total process energy. However, this inlet air can reach the dehumidifier with high moisture from the atmosphere condition requesting, in this case, more energy consumption according to the year's seasons. This paper promotes a utilization study of the current process through the installation of a pre-dehumidification device of the inlet air and shows a study to three different dehumidification systems that means by refrigeration, adsorption and actual comparing their performance in an energetic and economical point of view. The goals of this study are to analyze the capacity of moisture removing of each removing device, the influence of moisture variation of the inlet air in the process as well as the economic impact of each device in the global system. It concludes that the utilization of dehumidification devices can eliminate the heating system reducing this way the energy consumption. Moreover it promotes the increasing of moisture gradient between the inlet air and the product optimizing the drying process and increasing the global energy efficiency in the global system. Choosing the most appropriate system for the pre-dehumidification device depends on the desired initial and final moisture content of the product, but applying pre-dehumidifiers at the inlet air promotes an energetic optimization in the spray drying process. (author)

Development of secondary chamber for tar cracking-improvement of wood pyrolysis performance in pre-vacuum chamber

Science.gov (United States)

Siahaan, S.; Homma, H.; Homma, H.

2018-02-01

Energy crisis and global warming, in other words, climate change are critical topics discussed in various parts of the world. Global warming primarily result from too much emission of carbon dioxide (CO2) in the atmosphere. To mitigate global warming, or climate change and improve electrification in rural areas, wood pyrolysis technology is developed in a laboratory scale, of which gases are directly applicable to the gas engine generator. Our laboratory has developed a prototype of wood pyrolysis plant with a pre-vacuum chamber. However, tar yield was around 40 wt% of feedstock. This research aims to reduce tar yield by secondary tar cracking. For the secondary tar cracking, a secondary pre-vacuum chamber is installed after primary pre-vacuum chamber. Gases generated in the primary pre-vacuum chamber are lead into the secondary chamber that is heated up to 1000 K. This paper reports performance of the secondary chamber for secondary tar cracking in homogeneous mode and heterogeneous mode with char.

Breakfast skipping is associated with differences in meal patterns, macronutrient intakes and overweight among pre-school children.

Science.gov (United States)

Dubois, Lise; Girard, Manon; Potvin Kent, Monique; Farmer, Anna; Tatone-Tokuda, Fabiola

2009-01-01

To examine the association between skipping breakfast, daily energy, macronutrients and food intakes, and BMI in pre-school children. A cross-sectional study using information on children's food consumption and measured height and weight. Energy and macronutrient intakes of the children were derived from parent/day-care attendant's responses to 24 h recall interviews and eating behaviour questionnaires. Data obtained from a representative sample (n 2,103) of children born in Quebec (Canada) in 1998. One thousand five hundred and forty-nine children, with a mean age of 49 (sd 3.12) months. Ten per cent of children ate breakfast on fewer than 7 days per week. This behaviour was associated with a lower diet quality and concentrated energy intakes through higher protein intakes at lunch and the consumption of snacks higher in energy and carbohydrate in the afternoon and evening; yet total daily energy intakes were not significantly different from those of pre-school children who ate breakfast every day. Breakfast skippers' mean BMI increased as intake of energy, carbohydrates or servings of grain products increased; however, this was not the case for breakfast eaters. When Cole's cut-off for overweight/obesity was used, overweight/obesity in breakfast skippers was related to the dinner-time consumption of approximately 3,000 kJ (700 kcal) or more for energy intake, approximately 100 g or more of carbohydrates, or approximately 3 servings or more of grain products. Eating breakfast every day is associated with having a healthy body weight, likely due to a more even distribution of energy intake across meals throughout the day.

WRF Mesoscale Pre-Run for the Wind Atlas of Mexico

OpenAIRE

Hahmann, Andrea N.; Pena Diaz, Alfredo; Hansen, Jens Carsten

2016-01-01

This report documents the work performed by DTU Wind Energy for the project “Atlas Eólico Mexicano” or the Wind Atlas of Mexico. This document reports on the methods used in “Pre-run” of the windmapping project for Mexico. The interim mesoscale modeling results were calculated from the output of simulations using the Weather, Research and Forecasting (WRF) model. We document the method used to run the mesoscale simulations and to generalize the WRF model wind climatologies. A separate section...

(AGA) Pre Term Babies

African Journals Online (AJOL)

Haematological Indices in Healthy Appropriate For-Gestational-Age (AGA) Pre Term Babies. ... International Journal of Medicine and Health Development. Journal Home ... Patient and Methods: All consecutive healthy pre-term new born babies delivered at UNTH and admitted into the hospital NBSCU were included.

The effects of pre-mix on burn in ICF capsules

International Nuclear Information System (INIS)

Wilson, D C; Kyrala, G A; Jr, J F Benage; Wysocki, F J; Gunderson, M A; Herrman, H W; Cooley, J H; Welser-Sherrill, L; Garbett, W J; Horsfield, C J; Glebov, V Y; Yaakobi, B; Roberts, S A; Frenje, J

2008-01-01

Directly driven implosions at the Omega laser have tested the effects of pre-mix of Ar, Kr, and Xe in D 2 + 3 He filled glass micro-balloons. Diagnostics included: D+D and D+T neutron yields, D+ 3 He proton yields and spectra, Doppler broadened ion temperatures, time dependent neutron and proton burn rates, and time gated, high energy filtered, X-ray images. Yields are better calculated by XSN LTE than by non-LTE. Yields with a small amount of pre-mix, atom fractions of ∼5e-3 for Ar, 2e-3 Kr, and Xe for 5e-4, are more degraded than calculated, while the measured ion temperatures are the same as without pre-mix. There is also a decrease in fuel ρr. The neutron burn histories suggest that the early yield coming before the reflected shock strikes the incoming shell is un-degraded, with yield degradation occurring afterwards. Adding 20 atm % 3 He to pure D fuel seems to produce a similar degradation. Calculated gated X-ray images agree with observed when the reflected shock strikes the incoming shell, but are smaller than observed afterward. This partially explains yield degradation and both the low fuel and whole capsule ρr's observed in secondary T+D neutrons and slowing of the D+ 3 He protons. Neither LTE on non-LTE captures the degradation by 3 He or at low pre-mix levels, nor matches the large shell radii after impact of the reflected shock

AN OVERVIEW ON AVERAGE SPEED ENFORCEMENT SYSTEM AND ROAD SAFETY EFFECTS

OpenAIRE

ILGAZ, ARZU; SALTAN, MEHMET

2017-01-01

Averagespeed enforcement system is a new intelligent transportation system applicationthat has gained popularity all over the world following Europe and Australiawhich is recently being applied in Turkey as well. The main task of the systemis measuring the average speeds of motorized vehicles for the purpose oftraffic sanctions. A literature survey related with average speed enforcementsystem was carried out in this study at an international scale. In addition toproviding a comprehensive summ...

Reliability-Exploitation Analysis of Highway Transport Telematics Systems / Analiza Niezawodnościowo-Eksploatacyjna Autostradowych Systemów Telematyki Transportu

Directory of Open Access Journals (Sweden)

Siergiejczyk Mirosław

2015-09-01

Full Text Available W publikacji przedstawiono zagadnienia związane z autostradowymi systemami telematyki transportu. Zwrócono szczególna uwagę na autostradowe systemy łączności alarmowej. Opisano ich budowę oraz funkcjonowanie. Zaprezentowano także ich ogólny model niezawodnościowo-eksploatacyjny. Umożliwia on wyznaczenie wartości prawdopodobieństw przebywania systemu w wyróżnionych stanach eksploatacyjnych.

Framework of ERP System Implementation for SMEs In Punjab

OpenAIRE

Sarvjit Singh

2012-01-01

Enterprise resource planning (ERP) system can effectively reduce product cost, improve customer service experience, and increase enterprise competitiveness is one of the most significant information systems for Punjab enterprises, However, the successful implementation rate of ERP system/is much lower than initially planned and many enterprises did not achieve their intended goals. There are a lot of factors (e.g., high implementation costs, technical complexity, lack of well-trained employee...

Pre-OSART mission highlights. 1988-1990

International Nuclear Information System (INIS)

1994-09-01

The IAEA Pre-Operational Safety Review Teams (Pre-OSART) programme is part of the Operational Safety Review teams (OSART) programme and provides advice and assistance to Member States for enhancing the operational safety of nuclear power plants. OSART and Pre-OSART reviews are available to all countries with nuclear power plants in operation or approaching operation. Most of these countries have participated in the programme, by hosting one or more OSART or Pre-OSART missions or by making experts available to participate in missions. This document, which summarizes the finding of Pre-OSART reviews, covers the period from January 1988 to December 1990, and it is intended that further such documents will be prepared to cover subsequent Pre-OSART reviews

Pre-equilibrium emission and nuclear level densities in neutron induced reactions on Fe, Cr and Ni isotopes

International Nuclear Information System (INIS)

Ivascu, M.; Avrigeanu, M.; Ivascu, I.; Avrigeanu, V.

1989-01-01

The experimentally well known (n,p), (n,α) and (n,2n) reaction excitation functions, from threshold to 20 MeV incident energy, and neutron, proton and alpha-particle emission spectra at 14.8 MeV from Fe, Cr and Ni isotopes are calculated in the frame of a generalized Geometry-Dependent-Hybrid pre-equilibrium emission model, including angular momentum and parity conservation and alpha-particle emission, and the Hauser-Feshbach statistical model. Use of a consistent statistical model parameter set enables the validation of the pre-equilibrium emission model. Moreover, an enhanced pre-equilibrium emission from higher spin composite system states, associated with higher incident orbital momenta, has been evidenced. Higher orbital momenta involved also in the emergent channels of this process are suggested by calculations of the residual nuclei level populations. Finally, the unitary account of the (n, p) and (n, 2n) reaction excitation functions for Fe, Cr and Ni isotopes has allowed the proper establishment of the limits of the transition excitation range between the two different nuclear level density models used at medium and higher excitation energies, respectively. (author). 83 refs, 15 figs

Pre-Calculus For Dummies

CERN Document Server

Kuang, Yang

2012-01-01

The fun and easy way to learn pre-calculus Getting ready for calculus but still feel a bit confused? Have no fear. Pre-Calculus For Dummies is an un-intimidating, hands-on guide that walks you through all the essential topics, from absolute value and quadratic equations to logarithms and exponential functions to trig identities and matrix operations. With this guide's help you'll quickly and painlessly get a handle on all of the concepts - not just the number crunching - and understand how to perform all pre-calc tasks, from graphing to tackling proofs. You'll also get a new appreciation for

Pre-engineering assessment of Enersolve Demonstration Project. Dairy processing plant. Final report

Energy Technology Data Exchange (ETDEWEB)

1985-07-15

This study involved evaluation of a dairy processing plant to demonstrate energy conservation potential and developing a strategy to realize energy savings through retrofitting and revamping. The cheese and whey making plant of Agropur Cooperative Agro-Alimentaire located in Quebec was selected as a representative Canadian dairy processing plant. The pre-engineering assessment included a review of existing facility at the plant and plant operation, identification of plant equipment or process steps where substantial economic benefits would result from retrofitting and revamping, and estimation of budgetary cost for the subsequent engineering, procurement, construction management and monitoring of the retrofitted equipment. 3 figs., 2 tabs.

Sulphur cement pre-composition and process for preparing such sulphur cement pre-composition

NARCIS (Netherlands)

2013-01-01

The invention provides a process for the preparation of a sulphur cement pre-composition comprising reacting sulphur modifier with polysulphide-containing organosilane to obtain in the presence of sulphur the sulphur cement pre-composition, wherein the organosilane has the general molecular formula:

De novo DNA methylation during monkey pre-implantation embryogenesis.

Science.gov (United States)

Gao, Fei; Niu, Yuyu; Sun, Yi Eve; Lu, Hanlin; Chen, Yongchang; Li, Siguang; Kang, Yu; Luo, Yuping; Si, Chenyang; Yu, Juehua; Li, Chang; Sun, Nianqin; Si, Wei; Wang, Hong; Ji, Weizhi; Tan, Tao

2017-04-01

Critical epigenetic regulation of primate embryogenesis entails DNA methylome changes. Here we report genome-wide composition, patterning, and stage-specific dynamics of DNA methylation in pre-implantation rhesus monkey embryos as well as male and female gametes studied using an optimized tagmentation-based whole-genome bisulfite sequencing method. We show that upon fertilization, both paternal and maternal genomes undergo active DNA demethylation, and genome-wide de novo DNA methylation is also initiated in the same period. By the 8-cell stage, remethylation becomes more pronounced than demethylation, resulting in an increase in global DNA methylation. Promoters of genes associated with oxidative phosphorylation are preferentially remethylated at the 8-cell stage, suggesting that this mode of energy metabolism may not be favored. Unlike in rodents, X chromosome inactivation is not observed during monkey pre-implantation development. Our study provides the first comprehensive illustration of the 'wax and wane' phases of DNA methylation dynamics. Most importantly, our DNA methyltransferase loss-of-function analysis indicates that DNA methylation influences early monkey embryogenesis.

Energy trends and the water-energy binomium for Brazil

Directory of Open Access Journals (Sweden)

Gisele O. Da Rocha

2015-06-01

Full Text Available According to the demands of energy saving and carbon emission reduction, the water vs. energy nexus has become a major concern worldwide. Brazil occupies a singular position in the global energy system. A major portion of the Brazilian occupancies has electricity and the energy system expansion that, at first, possesses adequate means for supporting the economic growing may experience some turnovers. The Brazil determination through alternative fuels was a natural choice, given its large hydropower potential and land agricultural base. In the transportation sector Brazil has developed its energy matrix towards an important rate of ethanol and biodiesel. Although those fuels are low carbon emitter, they may probably not be an affordable alternative regarding land use, food security and water footprint. In this way, considering the recent advances in the exploration of oil from Pre-salt (9-15 million barrels and the discovery of shale gas wells up to 245 tcf, together to unfavorable social and environmental issues associated to biofuels, the Brazilian energy matrix might turn back to the fossil fuels again. These represent challenges to the Brazilian policymakers and how they will be solved will reflect not only in Brazil but also to the world at large.

Wave Energy Potential in the Latvian EEZ

Science.gov (United States)

Beriņš, J.; Beriņš, J.; Kalnačs, J.; Kalnačs, A.

2016-06-01

The present article deals with one of the alternative forms of energy - sea wave energy potential in the Latvian Exclusice Economic Zone (EEZ). Results have been achieved using a new method - VEVPP. Calculations have been performed using the data on wave parameters over the past five years (2010-2014). We have also considered wave energy potential in the Gulf of Riga. The conclusions have been drawn on the recommended methodology for the sea wave potential and power calculations for wave-power plant pre-design stage.

Pre-Diabetes Non-Modifiable Risk Factors

Science.gov (United States)

... Artery Disease Venous Thromboembolism Aortic Aneurysm More Pre-diabetes Non-modifiable Risk Factors Updated:Nov 9,2015 ... This content was last reviewed August 2015. Pre-diabetes • Introduction • About Pre-diabetes • What's the Problem? Intro ...

Financing green energy projects in Malaysia

International Nuclear Information System (INIS)

Eddynor Manshor; Yvonne Lunsong; Norhayati Kamaruddin

2000-01-01

Kyoto Protocol is the first global commitment to reduce greenhouse gas (GHG) emissions. Malaysia, which signed the Protocol on 12 March 1999, must also take steps to address the climate change concerns. The use of renewable energy sources is seen as a feasible way to address the issue. Despite their environment-friendliness, these sources of energy are grossly under-utilised even though Malaysia is amply endowed with renewable energies, particularly biomass and solar. As a unique domestic resource, recurring energy savings from energy efficiency could also qualify as renewable energy. At present, the contribution of renewable energy in the country's energy mix is very small compared to its large potential. The Malaysian Government recognizes the potential of this form of energy. As part of its fuel diversification policy, the government plans to expand the four-fuel strategy to include renewable energy as the fifth fuel. Due to all year constant sunshine and vast oil palm cultivation, both solar and palm oil residues are identified as the most promising green energy option. Efforts are underway to embark on programs to demonstrate and evaluate the viability of these emerging green technologies. A few organizations are given grants to undertake pre-feasibility studies of pre-commercialization demonstration projects. When approved, viable projects could also qualify for technical and financial assistance from foreign partners. However, grants are limited and under World Trade Organization rules such subsidies should not exceed 30 percent in most cases. Commercialization of green energy projects must therefore involve full participation of private developers and financial institutions. Yet, virtually no attempt is made to promote financing of such projects in Malaysia. In most cases, financial institutions are not aware of the economic potential of these unique and under exploited sources. This paper will discuss problems in financing green energy projects and then

Space Nuclear Power Plant Pre-Conceptual Design Report, For Information

Energy Technology Data Exchange (ETDEWEB)

B. Levine

2006-01-27

This letter transmits, for information, the Project Prometheus Space Nuclear Power Plant (SNPP) Pre-Conceptual Design Report completed by the Naval Reactors Prime Contractor Team (NRPCT). This report documents the work pertaining to the Reactor Module, which includes integration of the space nuclear reactor with the reactor radiation shield, energy conversion, and instrumentation and control segments. This document also describes integration of the Reactor Module with the Heat Rejection segment, the Power Conditioning and Distribution subsystem (which comprise the SNPP), and the remainder of the Prometheus spaceship.

Impact of mechanical, chemical and enzymatic pre-treatments on the methane yield from the anaerobic digestion of switchgrass

International Nuclear Information System (INIS)

Frigon, Jean-Claude; Mehta, Punita; Guiot, Serge R.

2012-01-01

The conversion of cellulosic crops into biofuels, including methane, is receiving a lot of attention lately. Panicum vergatum, or switchgrass, is a warm season perennial grass well adapted to grow in North America. Different pre-treatments were tested in 0.5 l batch reactors, at 35 °C, in order to enhance the methane production from switchgrass, including temperature, sonication, alkalinization and autoclaving. The methane production on the basis of volatile solids (VS) added to the fermentation were 112.4 ± 8.4, 132.5 ± 9.7 and 139.8 ml g −1 after 38 days of incubation for winter harvested switchgrass (WHS) after grinding, grinding with alkalinization, and grinding with alkalinization and autoclaving, respectively. The methane production was higher for fresh summer harvested switchgrass (SHS), with a production of 256.6 ± 8.2 ml g −1 VS after mulching, alkalinization and autoclaving. The methane production from SHS was improved by 29 and 42% when applying lignin (LiP) or manganese peroxidase (MnP), at 202.1 ± 9.8 and 222.9 ± 22.5 ml g −1 VS, respectively. The combination of an alkali pre-treatment with the MnP increased the methane production furthermore at 297.7 ml g −1 VS. The use of pectinases without chemical pre-treatment showed promising yields at 287.4 and 239.5 ml g −1 VS for pectate-lyase and poly-galacturonase, respectively. An estimation of the methane yield per hectare of crop harvested resulted in net energy production of 29.8, 49.7 and 78.1 GJ for winter harvested switchgrass, mulched and pretreated summer harvested switchgrass, respectively. Switchgrass represents an interesting candidate as a lignocellulosic crop for methane production. -- Highlights: ► Switchgrass is a model energy crops for biofuels production. ► This study evaluated different pre-treatments to enhance methane production. ► Pre-treatments increase significantly the methane produced from switchgrass. ► Enzymatic pre-treatments were superior to physical and

Mesophilic and thermophilic anaerobic biodegradability of water hyacinth pre-treated at 80 degrees C.

Science.gov (United States)

Ferrer, Ivet; Palatsi, Jordi; Campos, Elena; Flotats, Xavier

2010-10-01

Water hyacinth (Eichornia crassipes) is a fast growing aquatic plant which causes environmental problems in continental water bodies. Harvesting and handling this plant becomes an issue, and focus has been put on the research of treatment alternatives. Amongst others, energy production through biomethanation has been proposed. The aim of this study was to assess the anaerobic biodegradability of water hyacinth under mesophilic and thermophilic conditions. The effect of a thermal sludge pre-treatment at 80 degrees C was also evaluated. To this end, anaerobic biodegradability tests were carried out at 35 degrees C and 55 degrees C, with raw and pre-treated water hyacinth. According to the results, the thermal pre-treatment enhanced the solubilisation of water hyacinth (i.e. increase in the soluble to total chemical oxygen demand (COD)) from 4% to 12% after 30 min. However, no significant effect was observed on the methane yields (150-190 L CH(4)/kg volatile solids). Initial methane production rates for thermophilic treatments were two fold those of mesophilic ones (6-6.5L vs. 3-3.5 L CH(4)/kg COD x day). Thus, higher methane production rates might be expected from thermophilic reactors working at short retention times. The study of longer low temperature pre-treatments or pre-treatments at elevated temperatures coupled to thermophilic reactors should be considered in the future. (c) 2009 Elsevier Ltd. All rights reserved.

Mesophilic and thermophilic anaerobic biodegradability of water hyacinth pre-treated at 80 oC

International Nuclear Information System (INIS)

Ferrer, Ivet; Palatsi, Jordi; Campos, Elena; Flotats, Xavier

2010-01-01

Water hyacinth (Eichornia crassipes) is a fast growing aquatic plant which causes environmental problems in continental water bodies. Harvesting and handling this plant becomes an issue, and focus has been put on the research of treatment alternatives. Amongst others, energy production through biomethanation has been proposed. The aim of this study was to assess the anaerobic biodegradability of water hyacinth under mesophilic and thermophilic conditions. The effect of a thermal sludge pre-treatment at 80 o C was also evaluated. To this end, anaerobic biodegradability tests were carried out at 35 o C and 55 o C, with raw and pre-treated water hyacinth. According to the results, the thermal pre-treatment enhanced the solubilisation of water hyacinth (i.e. increase in the soluble to total chemical oxygen demand (COD)) from 4% to 12% after 30 min. However, no significant effect was observed on the methane yields (150-190 L CH 4 /kg volatile solids). Initial methane production rates for thermophilic treatments were two fold those of mesophilic ones (6-6.5 L vs. 3-3.5 L CH 4 /kg COD.day). Thus, higher methane production rates might be expected from thermophilic reactors working at short retention times. The study of longer low temperature pre-treatments or pre-treatments at elevated temperatures coupled to thermophilic reactors should be considered in the future.

Models of direct reactions and quantum pre-equilibrium for nucleon scattering on spherical nuclei

International Nuclear Information System (INIS)

Dupuis, M.

2006-01-01

When a nucleon collides with a target nucleus, several reactions may occur: elastic and inelastic scatterings, charge exchange... In order to describe these reactions, different models are involved: the direct reactions, pre-equilibrium and compound nucleus models. Our goal is to study, within a quantum framework and without any adjustable parameter, the direct and pre-equilibrium reactions for nucleons scatterings off double closed-shell nuclei. We first consider direct reactions: we are studying nucleon scattering with the Melbourne G-matrix, which represents the interaction between the projectile and one target nucleon, and with random phase approximation (RPA) wave functions which describe all target states. This is a fully microscopic approach since no adjustable parameters are involved. A second part is dedicated to the study of nucleon inelastic scattering for large energy transfer which necessarily involves the pre-equilibrium mechanism. Several models have been developed in the past to deal with pre-equilibrium. They start from the Born expansion of the transition amplitude which is associated to the inelastic process and they use several approximations which have not yet been tested. We have achieved some comparisons between second order cross sections which have been calculated with and without these approximations. Our results allow us to criticize some of these approximations and give several directions to improve the quantum pre-equilibrium models. (author)

Pre-pregnancy BMI and intake of energy and calcium are associated with the vitamin D intake of pregnant Malaysian women

Directory of Open Access Journals (Sweden)

Heng Yaw Yong

2017-12-01

Full Text Available Background . Adequate vitamin D intake during pregnancy is important for prevention of adverse pregnancy outcomes. Objectives . The present study aims to determine the intake and sources of vitamin D, as well as factors associated with vitamin D intake among pregnant Malaysian women. Material and methods . This cross-sectional study was conducted at the Seremban Maternal and Child Health (MCH clinic, Negeri Sembilan. Women (n = 314 were measured for height and weight and interviewed for socio-demographics, obstetrics, dietary intake, source of vitamin D, intake of vitamin D supplements and physical activity. Results . One-third of pregnant women were overweight (21% or obese (13% with a mean pre-pregnancy Body Mass Index (BMI of 23.65 ± 5.29 kg/m². The mean vitamin D intake of pregnant women was 11.54 ± 0.45 μg/day (diet = 6.55 ± 4.43 μg/day; supplements = 4.99 ± 5.95 μg/day with approx. 74.5% of intake being above recommendation levels. Milk and milk products showed the greatest contribution to vitamin D intake (56.8%. While women with higher energy (adjusted OR = 0.10, 95% CI = 0.01–0.87 and calcium (adjusted OR = 0.27, 95% CI = 0.11–0.67 intake were more likely to have adequate vitamin D intake, obese women were less likely to have adequate vitamin D intake (adjusted OR = 1.65, 95% CI = 1.72–3.79. Conclusions . Adequate intake of vitamin D was significantly associated with higher energy and calcium intake, but obese women tend to have inadequate intake. Further studies need to confirm these finding and the contribution of vitamin D intake to vitamin D status in pregnant Malaysian women.

40 CFR 1065.520 - Pre-test verification procedures and pre-test data collection.

Science.gov (United States)

2010-07-01

... corrective action does not resolve the deficiency, you may request to use the contaminated system as an... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Pre-test verification procedures and pre-test data collection. 1065.520 Section 1065.520 Protection of Environment ENVIRONMENTAL PROTECTION...

KamLAND Sensitivity to Neutrinos from Pre-supernova Stars

Science.gov (United States)

Asakura, K.; Gando, A.; Gando, Y.; Hachiya, T.; Hayashida, S.; Ikeda, H.; Inoue, K.; Ishidoshiro, K.; Ishikawa, T.; Ishio, S.; Koga, M.; Matsuda, S.; Mitsui, T.; Motoki, D.; Nakamura, K.; Obara, S.; Oura, T.; Shimizu, I.; Shirahata, Y.; Shirai, J.; Suzuki, A.; Tachibana, H.; Tamae, K.; Ueshima, K.; Watanabe, H.; Xu, B. D.; Kozlov, A.; Takemoto, Y.; Yoshida, S.; Fushimi, K.; Piepke, A.; Banks, T. I.; Berger, B. E.; Fujikawa, B. K.; O'Donnell, T.; Learned, J. G.; Maricic, J.; Matsuno, S.; Sakai, M.; Winslow, L. A.; Efremenko, Y.; Karwowski, H. J.; Markoff, D. M.; Tornow, W.; Detwiler, J. A.; Enomoto, S.; Decowski, M. P.; KamLAND Collaboration

2016-02-01

In the late stages of nuclear burning for massive stars (M > 8 M⊙), the production of neutrino-antineutrino pairs through various processes becomes the dominant stellar cooling mechanism. As the star evolves, the energy of these neutrinos increases and in the days preceding the supernova a significant fraction of emitted electron anti-neutrinos exceeds the energy threshold for inverse beta decay on free hydrogen. This is the golden channel for liquid scintillator detectors because the coincidence signature allows for significant reductions in background signals. We find that the kiloton-scale liquid scintillator detector KamLAND can detect these pre-supernova neutrinos from a star with a mass of 25 M⊙ at a distance less than 690 pc with 3σ significance before the supernova. This limit is dependent on the neutrino mass ordering and background levels. KamLAND takes data continuously and can provide a supernova alert to the community.

Constitutive, but Not Challenge-Induced, Interleukin-10 Production Is Robust in Acute Pre-Pubescent Protein and Energy Deficits: New Support for the Tolerance Hypothesis of Malnutrition-Associated Immune Depression Based on Cytokine Production in vivo

OpenAIRE

Monk, Jennifer M.; Steevels, Tessa A.M.; Hillyer, Lyn M.; Woodward, Bill

2011-01-01

The tolerance model of acute (i.e., wasting) pre-pubescent protein and energy deficits proposes that the immune depression characteristic of these pathologies reflects an intact anti-inflammatory form of immune competence that reduces the risk of autoimmune reactions to catabolically released self antigens. A cornerstone of this proposition is the finding that constitutive (first-tier) interleukin(IL)-10 production is sustained even into the advanced stages of acute malnutrition. The IL-10 re...

Hyperion II: a heavy ion pre-injector for Saturne

International Nuclear Information System (INIS)

Olivier, M.; Auclair, J.P.; Courtois, A.

1983-01-01

Since 1978, the 3GeV synchrotron Saturne is routinely operated with proton, deuteron, helium beams and, since 1981 with polarized protons and deuterons. Heavy ions are expected in 1983 by using a new pre-injector presently under construction. The marriage of an EBIS and an RFQ can be looked upon generally as a very good means of production of heavy ion beams at low energy. In the first paragraph, the cryogenic version of EBIS, called CRYEBIS, is described, while the RFQ design is studied in detail in paragraph two. The construction status is given in a third paragraph

Measurements of time dependent energy spectra of neutrons in a small graphite assembly

International Nuclear Information System (INIS)

Fujita, Yoshiaki; Sakamoto, Shigeyasu; Aizawa, Otohiko; Takahashi, Akito; Sumita, Kenji.

1975-01-01

The time-dependent energy spectra of neutrons have been measured in a small 30x30x30 cm 3 graphite assembly by means of the linac-chopper method, with a view to establishing experimental evidence that there is no asymptotic spectrum in such a small assembly, and in order to study the non-asymptotic behavior of neutrons. The arrangement of a polyethylene pre-moderator adjacent to the assembly made the measurements possible with the improvement obtained thereby of the neutron counting statistics. It was indicated from calculation that the presence of the pre-moderator had little effect - at least above the Bragg cut-off energy - on the evolution in time of the energy spectra of neutrons in the graphite assembly. The experimental results indicated very probable disappearance of asymptotic spectra, and revealed significant enhancement of trapping at Bragg energies with the lapse of time. This is consistent with the results of pulsed neutron experiments in small assemblies conducted by Takahashi et al., and falls in line with de Saussure's approximation. The spectra in the graphite assembly showed significant space dependence, the spectra becoming harder with increasing distance from the pre-moderator. This hardening may be attributed to the relatively faster propagation of higher energy neutrons. (auth.)

Cherokee Wind Energy Development - Feasibility and Pre-Construction Studies

Energy Technology Data Exchange (ETDEWEB)

McMillan, Andy [Cherokee Nation Businesses, LLC, Catoosa, OK (United States)

2017-06-30

Cherokee Nation Businesses (CNB) received a grant from the US Department of Energy to explore feasibility and pursue development of a wind power generation facility on Cherokee land in north-central Oklahoma. This project followed several years of initial study exploring the possibility of commercial-scale wind power generation on primarily agricultural land owned by the Cherokee Nation. This project produced detailed analysis of the legal, financial and market viability of such generation facilities, and encompassed a full technical evaluation of the engineering, environmental, and geotechnical aspects of installing this capacity. During the course of this project, information gleaned from this exploration changed CNB’s thinking about the best course of action for Cherokee participation in the development, eventually moving away from an equity-owner model and towards utilization of the land asset as a resource while mitigating Cherokee financial and operational risk.

Effect of pre-lithiation degrees of mesocarbon microbeads anode on the electrochemical performance of lithium-ion capacitors

International Nuclear Information System (INIS)

Zhang, Jin; Shi, Zhiqiang; Wang, Chengyang

2014-01-01

Highlights: • MCMB with different pre-lithiation capacity as negative electrode in LIC. • Pre-lithiation improves the electrochemical performance of LIC. • The optimal pre-lithiation capacity has been proposed. - Abstract: Lithium ion capacitors are assembled with pre-lithiated mesocarbon microbeads (LMCMB) anode and activated carbon (AC) cathode. The effect of pre-lithiation degrees on the crystal structure of MCMB electrode and the electrochemical capacitance behavior of LIC are investigated by X-ray diffraction (XRD) and the charge-discharge test of three-electrode cell. The structure of graphite still maintained when the pre-lithiation capacity is less than 200 mAh g −1 , phase transition takes place with the increase of pre-lithiation capacity from 250 mAh g −1 to 350 mAh g −1 . Pre-lithiation degrees of MCMB anode greatly affect the charge-discharge process and behavior, which impact on the electrochemical performance of LIC. The LIC with pre-lithiation capacity of 300 mAh g −1 has the optimal electrochemical performance. The energy density of LIC300 is up to 92.3 Wh kg −1 , the power density as high as 5.5 kW kg −1 and the capacity retention is 97.0% after 1000 cycles. The excellent electrochemical performance benefits from the appropriate pre-lithiation capacity of negative electrode. The appropriate pre-lithiation ensures the working voltage of negative electrode in low and relative stable charge-discharge platform corresponding to the mutual phase transition from the second stage graphite intercalation compound (LiC 12 ) to the first stage graphite intercalation compound (LiC 6 ). The stable charge-discharge platform of negative electrode is conductive to the sufficient utilization of AC positive electrode

Exascale for Energy: The Role of Exascale Computing in Energy Security

International Nuclear Information System (INIS)

2010-01-01

How will the United States satisfy energy demand in a tightening global energy marketplace while, at the same time, reducing greenhouse gas emissions? Exascale computing - expected to be available within the next eight to ten years - may play a crucial role in answering that question by enabling a paradigm shift from test-based to science-based design and engineering. Computational modeling of complete power generation systems and engines, based on scientific first principles, will accelerate the improvement of existing energy technologies and the development of new transformational technologies by pre-selecting the designs most likely to be successful for experimental validation, rather than relying on trial and error. The predictive understanding of complex engineered systems made possible by computational modeling will also reduce the construction and operations costs, optimize performance, and improve safety. Exascale computing will make possible fundamentally new approaches to quantifying the uncertainty of safety and performance engineering. This report discusses potential contributions of exa-scale modeling in four areas of energy production and distribution: nuclear power, combustion, the electrical grid, and renewable sources of energy, which include hydrogen fuel, bioenergy conversion, photovoltaic solar energy, and wind turbines.

Emission of high-energy, light particles from intermediate-energy heavy-ion reactions

International Nuclear Information System (INIS)

Ball, J.B.; Auble, R.L.

1982-01-01

One of the early surprises in examining reaction products from heavy ion reactions at 10 MeV/nucleon and above was the large yield of light particles emitted and the high energies to which the spectra of these particles extended. The interpretation of the origin of the high energy light ions has evolved from a picture of projectile excitation and subsequent evaporation to one of pre-equilibrium (or nonequilibrium) emission. The time scale for particle emission has thus moved from one that occurs following the initial collision to one that occurs at the very early stages of the collision. Research at ORNL on this phenomenon is reviewed

A Comparative Analysis of Kalman Filters Using a Hypervelocity Missile Simulation.

Science.gov (United States)

1981-12-01

quality to any comparable systemi deployed by NATTO (Ref. 4). The buildup in Soviet Forces has :gIenorated a ignificant numerical advantage In tanks...penetrate the comparntively thin upper surfaces of a tank. The other is to use the U.S. advantage in micro-electronics to develop precision-guided munitions...per target killed. These advantages have prompted the Air Force to proceed with feasibility studies and tests to demonstrate the capabilities of the

PRE: A framework for enterprise integration

Energy Technology Data Exchange (ETDEWEB)

Whiteside, R.A.; Friedman-Hill, E.J. [Sandia National Labs., Livermore, CA (United States); Detry, R.J. [Sandia National Labs., Albuquerque, NM (United States)

1998-03-01

Sandia National Laboratories` Product Realization Environment (PRE) is a lightweight, CORBA based framework for the integration of a broad variety of applications. These applications are wrapped for use in the PRE framework as reusable components. For example, some of the PRE components currently available include: (1) product data management (PDM) system, (2) human resources database, several finite element analysis programs, and (3) a variety of image and document format converters. PRE enables the development of end user applications (as Java applets, for example) that use these components as building blocks. To aid such development, the PreLib library (available in both C++ and Java) permits both wrapping and using these components without knowledge of either CORBA or the security mechanisms used.

Pre-tuning of TRISTAN superconducting RF cavities

International Nuclear Information System (INIS)

Tajima, Tsuyoshi; Furuya, Takaaki; Suzuki, Toshiji; Iino, Yohsuke.

1990-01-01

Pre-tuning of thirty-two TRISTAN superconducting cavities has been done. In this paper are described the pre-tuning system and the results of all the cavities. The average field flatness was 1.4 % after pre-tuning. From our experience, the followings are important, 1) to evacuate the cavity during the process of the pre-tuning to avoid the uncertainty in evacuation, 2) pre-tuning is needed after annealing because it causes changes of the cell length and the field profile and 3) field flatness sometimes changes when expanded and 4) cells should not be expanded more than 1.5 mm after pre-tuning since inelastic deformation occurs. (author)

What Trajectory for Energy Transition? The Genealogy of the Energy Transition Law and its Positioning with regard to Pre-existing Scenarios

International Nuclear Information System (INIS)

Criqui, Patrick

2014-01-01

The many lively debates that preceded -and still fuel- discussion of the 'Energy Transition and Green Growth' bill attest to the importance of that law for many French citizens and economic actors. Without going back over the debate on the feasibility or realism of the law's objectives, to which Futuribles contributed through its web site in late September, it is possible to put these matters into some perspective, as Patrick Criqui does here, by reminding us of the genealogy of the bill and the various future scenarios that were developed during the French National Debate on Energy Transition of 2013 before the bill passed into law. Criqui reminds us of the possible scenarios discussed, grouped as they were around four major energy trajectories: 'Energy-saving', 'Efficiency', 'Diversity' and 'Decarbonization'. Among these, the most important sources of divergence were over the level of reduction of energy consumption by 2050 and the relative parts to be played by nuclear power and renewable energies. Basing himself on the target figures included in the bill, Patrick Criqui identifies the image of the future towards which, on the face of it, the law points -namely, the 'Efficiency' trajectory- even if, as he very rightly emphasizes, its implementation will definitely be a dynamic affair, incorporating the various adaptations that might turn out to be necessary between now and 2050. (author)

Essays on environmental policies, corruption, and energy

Science.gov (United States)

Baksi, Soham

This thesis consists of four essays. The first essay looks at pollution taxation under capital mobility, and analyzes the role of pre-commitment by countries to their pollution tax rate. A polluting firm sells its product in two countries, and can locate and produce in a single country or in both countries. Due to the discrete-choice nature of the firm's location problem, the countries' welfare functions are discontinuous in their pollution tax rate. We show that when the countries cannot pre-commit to their pollution tax, the firm can still engender tax competition between them by strategically locating in both the countries. Moreover, pre-commitment pollution taxation may not be welfare improving for the countries, although it always makes the firm better off. The second essay studies the effect of liberalization on corruption. Corruptible inspectors enforce an environmental regulation on firms, and are monitored by an honest regulator. Liberalization not only increases the variety of goods and the marginal utility of accepting a bribe, but also puts pressure on the regulator to curb corruption. The interaction of these two effects can cause corruption to initially increase with liberalization, and then decrease beyond a threshold. Moreover, equilibrium corruption is lower when the regulator is able to pre-commit to her monitoring frequency. The third essay analyzes optimal labeling (information revelation) procedures for hidden attributes of credence goods. Consumers are heterogeneous in their preference for the hidden attribute, and producers can either self-label their products, or have them certified by a third party. The government can impose self or third-party labeling requirements on either the "green" or the "brown" producers. When corrupt producers can affix spurious labels, the government needs to monitor them. A mandatory self-labeling policy is shown to generally dominate mandatory third-party labeling. The fourth essay develops formulas for

UV Diagnostics for the Energy Budget of Flares and CMEs J. C. ...

Indian Academy of Sciences (India)

2003-11-04

Nov 4, 2003 ... The energy budget of solar flares and coronal mass ejections ... Vourlidas (2007) measured the kinetic energies for several CMEs and estimated the .... along the UVCS slit from the pre-CME intensities of the O VI lines, the ...

Hunger can be taught: Hunger Recognition regulates eating and improves energy balance

Science.gov (United States)

Ciampolini, Mario; Lovell-Smith, H David; Kenealy, Timothy; Bianchi, Riccardo

2013-01-01

A set of spontaneous hunger sensations, Initial Hunger (IH), has been associated with low blood glucose concentration (BG). These sensations may arise pre-meal or can be elicited by delaying a meal. With self-measurement of BG, subjects can be trained to formally identify and remember these sensations (Hunger Recognition). Subjects can then be trained to ensure that IH is present pre-meal for most meals and that their pre-meal BG is therefore low consistently (IH Meal Pattern). IH includes the epigastric Empty Hollow Sensation (the most frequent and recognizable) as well as less specific sensations such as fatigue or light-headedness which is termed inanition. This report reviews the method for identifying IH and the effect of the IH Meal Pattern on energy balance. In adults, the IH Meal Pattern has been shown to significantly decrease energy intake by one-third, decrease preprandial BG, reduce glycosylated hemoglobin, and reduce insulin resistance and weight in those who are insulin resistant or overweight. Young children as well as adults can be trained in Hunger Recognition, giving them an elegant method for achieving energy balance without the stress of restraint-type dieting. The implications of improving insulin sensitivity through improved energy balance are as wide as improving immune activity. PMID:23825928

Pre-test analysis results of a PWR steel lined pre-stressed concrete containment model

International Nuclear Information System (INIS)

Basha, S.M.; Ghosh, Barnali; Patnaik, R.; Ramanujam, S.; Singh, R.K.; Kushwaha, H.S.; Venkat Raj, V.

2000-02-01

Pre-stressed concrete nuclear containment serves as the ultimate barrier against the release of radioactivity to the environment. This ultimate barrier must be checked for its ultimate load carrying capacity. BARC participated in a Round Robin analysis activity which is co-sponsored by Sandia National Laboratory, USA and Nuclear Power Engineering Corporation Japan for the pre-test prediction of a 1:4 size Pre-stressed Concrete Containment Vessel. In house finite element code ULCA was used to make the test predictions of displacements and strains at the standard output locations. The present report focuses on the important landmarks of the pre-test results, in sequential terms of first crack appearance, loss of pre-stress, first through thickness crack, rebar and liner yielding and finally liner tearing at the ultimate load. Global and local failure modes of the containment have been obtained from the analysis. Finally sensitivity of the numerical results with respect to different types of liners and different constitutive models in terms of bond strength between concrete and steel and tension-stiffening parameters are examined. The report highlights the important features which could be observed during the test and guidelines are given for improving the prediction in the post test computation after the test data is available. (author)

Energy Impacts of Energy and Indoor Environmental Quality Retrofits of Apartments in California

Energy Technology Data Exchange (ETDEWEB)

Fisk, William J. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Norris, Federico [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Singer, Brett C. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2013-11-01

Monthly gas and electricity use data from a set of 13 study apartments and 20 control apartments from three apartment buildings (B1 B3) in California were analyzed. The study apartments were retrofit with simultaneous energy savings and indoor environmental quality (IEQ) improvements as the goal. The control apartments were not retrofit. Pre-retrofit modeling indicated annual energy savings of 21percent, 17percent, and 27percent for the study apartments in B1-B3, respectively. Based on a comparison of changes in energy use of study apartments to energy use changes of control apartments, total measured savings of gas energy plus site electrical energy were 28percent in B1, 5percent in B2, and 3percent in B3. Given the small number of study apartments and the substantial changes in energy use within control apartments, the project yielded no conclusive evidence of energy savings. Apartment energy use increased with number of occupants and with floor area; however, the association with occupancy was most evident. Climate differences did not appear to be the major driver for the variability in energy use among apartments. Changes in occupant behaviors affecting energy use may have overwhelmed and obscured the energy savings in this small number of buildings. Much larger prior studies employing similar retrofits indicate that the retrofits usually do save energy.

EquiMar : Equitable Testing and Evaluation of Marine Energy Extraction Devices in Terms of Performance, Cost and Environmental Impact

DEFF Research Database (Denmark)

Kofoed, Jens Peter; Pecher, Arthur; Margheritini, Lucia

The Sea Trial Manual (D4.1) describes the type of operations required to advance an ocean energy conversion device (wave and tide) from an intermediate scaled sub-systems proving machine (circa 1:4) to a full size solo prototype pre-production unit and on towards a pre-commercial device ready for...... of marine energy converters, according to Annex 1 – Description of Work of the EquiMar project, where task 4.2 is defined. Some slight modifications have been made to the original structure due to re-adjustments in accordance with the on-going research.......The Sea Trial Manual (D4.1) describes the type of operations required to advance an ocean energy conversion device (wave and tide) from an intermediate scaled sub-systems proving machine (circa 1:4) to a full size solo prototype pre-production unit and on towards a pre-commercial device ready...

Application of polyurethane foam as a sorbent for trace metal pre-concentration — A review

Science.gov (United States)

Lemos, V. A.; Santos, M. S.; Santos, E. S.; Santos, M. J. S.; dos Santos, W. N. L.; Souza, A. S.; de Jesus, D. S.; das Virgens, C. F.; Carvalho, M. S.; Oleszczuk, N.; Vale, M. G. R.; Welz, B.; Ferreira, S. L. C.

2007-01-01

The first publication on the use of polyurethane foam (PUF) for sorption processes dates back to 1970, and soon after the material was applied for separation processes. The application of PUF as a sorbent for solid phase extraction of inorganic analytes for separation and pre-concentration purposes is reviewed. The physical and chemical characteristics of PUF (polyether and polyester type) are discussed and an introduction to the characterization of these sorption processes using different types of isotherms is given. Separation and pre-concentration methods using unloaded and loaded PUF in batch and on-line procedures with continuous flow and flow injection systems are presented. Methods for the direct solid sampling analysis of the PUF after pre-concentration are discussed as well as approaches for speciation analysis. Thermodynamic proprieties of some extraction processes are evaluated and the interpretation of determined parameters, such as enthalpy, entropy and Gibbs free energy in light of the physico-chemical processes is explained.

Pre-equilibrium emission and multifragmentation in heavy-ion collisions

International Nuclear Information System (INIS)

Karlsson, Leif.

1990-12-01

Subthreshold pion production has been studied with a beam of 12 C on targets of 12 C, 116 Sn and 124 Sn. Cross-sections for π +- production at 70 degrees C were obtained. The π + /π - ratio is close to unity for all targets. Coincidence measurements show a suppression of the projectile fragment when pions are detected. The target mass dependence in the differential cross-section is analysed with an absorption calculation. The fragmentation of nuclei has been studied in emulsion experiments with projectiles of Kr and 0 in an energy range of 5A to 2100A MeV. The maximum multiplicity is compared to various models. The LILITA code, at low energies, and a hadromchemical calculation, at high energies. The predicted fluctuations at the critical point, in the percolation model and the Copenhagen liquid-drop model, are not observed. The main ingredients in the dynamical nucleus-nucleus collision code which is developed is the expansion of the hot zone due to pressure differences, a time evolution by transport equations and a pre-equilibrium emission of particles. This model is compared with experimental data as well as with a VUU-calculation. The energy distribution is in both cases in good agreement. The comparison with experimental data, requires, however, a distorted potential. The differences in the angular distributions are large. (au)

Pre-task music improves swimming performance.

Science.gov (United States)

Smirmaul, B P; Dos Santos, R V; Da Silva Neto, L V

2015-12-01

The purpose of this study was to investigate the effects of pre-task music on swimming performance and other psychological variables. A randomized counterbalanced within-subjects (experimental and control condition) design was employed. Eighteen regional level male swimmers performed two 200-m freestyle swimming time trials. Participants were exposed to either 5 minutes of self-selected music (pre-task music condition) or 5 minutes of silence (control condition) and, after 1 minute, performed the swimming task. Swimming time was significantly shorter (-1.44%) in the pre-task music condition. Listening to pre-task music increased motivation to perform the swimming task, while arousal remained unchanged. While fatigue increased after the swimming task in both conditions, vigor, ratings of perceived exertion and affective valence were unaltered. It is concluded, for the first time, that pre-task music improves swimming performance.

An anaesthetic pre-operative assessment clinic reduces pre-operative inpatient stay in patients requiring major vascular surgery.

LENUS (Irish Health Repository)

O'Connor, D B

2012-02-01

BACKGROUND: Patients undergoing major vascular surgery (MVS) require extensive anaesthetic assessment. This can require extended pre-operative stays. AIMS: We investigated whether a newly established anaesthetic pre-operative assessment clinic (PAC) would reduce the pre-operative inpatient stay, avoid unnecessary investigations and facilitate day before surgery (DBS) admissions for patients undergoing MVS. PATIENT AND METHODS: One year following and preceding the establishment of the PAC the records of patients undergoing open or endovascular aortic aneurysm repair, carotid endarterectomy and infra-inguinal bypass were reviewed to measure pre-operative length of stay (LoS). RESULTS: Pre-operative LoS was significantly reduced in the study period (1.85 vs. 4.2 days, respectively, P < 0.0001). Only 12 out of 61 patients in 2007 were admitted on the DBS and this increased to 33 out of 63 patients (P = 0.0002). No procedure was cancelled for medical reasons. CONCLUSION: The PAC has facilitated accurate outpatient anaesthetic assessment for patients requiring MVS. The pre-operative in-patient stay has been significantly reduced.

Preliminary Study on 50MHz Heavy Ion RFQ without Pre-Bunchers

International Nuclear Information System (INIS)

Cho, Yong Sub; Jang, Ji Ho; Kim, Han Sung; Kwon, Hyeok Jung

2009-01-01

We are studying a Radio Frequency Quadrupole (RFQ) as a lower energy part for a 200-MeV/u heavy ion linear accelerator of the International Business and Science Belt Project. The RFQ accelerates the 10- keV/u heavy ion beams from ion source (hydrogen molecules to uranium) and injects the 300-keV/u beam to the superconducting linac. Table I shows the basic parameters for the RFQ accelerator. In this study, we assumed that pre-bunchers to accelerate two charge state is not required

Terrestrial Energy bets on molten salt reactors

International Nuclear Information System (INIS)

Anon.

2015-01-01

Terrestrial Energy is a Canadian enterprise, founded in 2013, for marketing the integral molten salt reactor (IMSR). A first prototype (called MSRE and with an energy output of 8 MW) was designed and operated between 1965 and 1969 by the Oak Ridge National Laboratory. IMSR is a small, modular reactor with a thermal energy output of 400 MW. According to Terrestrial Energy the technology of conventional power reactors is too complicated and too expensive. On the contrary IMSR's technology appears to be simple, easy to operate and affordable. With a staff of 30 people Terrestrial Energy appears to be a start-up in the nuclear sector. A process of pre-licensing will be launched in 2016 with the Canadian nuclear safety authority. (A.C.)

Pre-reconstruction dual-energy, X-ray computerized tomography (CT): theory, implementation, results, and clinical use

International Nuclear Information System (INIS)

Oravez, W.T.

1986-01-01

For the task of bone mineral measurement, single-energy quantitative CT has demonstrated its worth in terms of precision for most longitudinal clinical studies. However, for cross-sectional clinical studies, known inaccuracy exists due to less than robust beam-hardening corrections, and negatively biased bone mineral measurement, due to the effect of unknown variable concentration of bone marrow fat within the metabolically active trabecular bone space. A dual-energy measurement technique provides a solution to these deficiencies of single-energy measurements. The fundamental theory of dual-energy measurement techniques is based on a Compton-photoelectric approximation and the mixture rule for the total attenuation coefficient. Resolution of atomic composition and electron density components of attenuation should then be possible. To take full advantage of these principles, the raw dual-energy projection values are operated on before reconstruction. This method beam-hardening and composition-selective imaging. Rapid kilovoltage switching between projection measurements, rather than serial measurements, assures the best measurement quality

Serum 8-isoprostane increased in pre-eclampsia

Directory of Open Access Journals (Sweden)

Besari Adi Pramono

2012-04-01

Full Text Available Background The main causes of maternal mortality in Indonesia are pre-eclampsia, hemorrhage, and infection. Oxidative stress has a primary role in pre-eclampsia and one of its parameters is 8-isoprostane serum level. The objective of this study is to measure 8-isoprostane and to analyze the relationship between 8-isoprostane level and birth weight in pre-eclampsia. Methods A cross-sectional study involving 23 pre-eclampsia and 29 normotensive pregnant women with normal or cesarean delivery at Dr. Kariadi Hospital Semarang from January to May 2011. Collected maternal blood samples were assessed for 8-Isoprostane levels by means of a specific ELISA kit. Neonatal birth weight was measured immediately after delivery by means of calibrated baby scales. Differences in 8-isoprostane levels between pre-eclampsia and normotensive women were assessed using independent t-test for normal distributed data, and the Mann-Whitney test for non-normally distributed data. Results Mean 8-isoprostane level was significantly higher in women with pre-eclampsia than in normotensive women (62.52 ± 12.19 pg/mL vs 28.64 ± 8.81 pg/mL (p<0.05. Low birth weight was twice as frequent in pre-eclampsia than in normotensives. There was no correlation between 8-isoprostane serum level and neonatal birth weight in pre-eclampsia. Conclusion The level of 8-isoprostane was higher in pre-eclampsia than in normotensives. It is recommended to conduct further studies to determine whether 8-isoprostane may be used as a predictive marker of pre-eclampsia.

Effect of pre-hardening on the lifetime of type 304L austenitic stainless steels

International Nuclear Information System (INIS)

Kpodekon, C.

2010-01-01

This study deals with the effect of the loading history on the cyclic behavior and the fatigue life of two kinds (THYSSEN and CLI) of 304L stainless steel at room temperature. The experiments have been performed using two specimens' categories. The first one (virgin) has been submitted to only classical fatigue tests while in the second category, prior to the fatigue test, the specimen is subjected to a pre-hardening process under either monotonic or cyclic strain control. Cyclic softening followed by cyclic hardening are observed for the virgin specimens while only cyclic softening is exhibited by the pre-hardened specimens. The obtained results show that fatigue life is strongly influenced by the pre-hardening: it seems beneficial under stress control but detrimental under strain control, even in the presence of a compressive mean stress. The results are discussed regarding the cyclic evolution of the elastic modulus as well as the isotropic and kinematic parts of the strain hardening, and strain energy density per cycle, in different configurations: with or without prehardening,stress or strain control. (author)

Commercial Building Energy Saver: An energy retrofit analysis toolkit

International Nuclear Information System (INIS)

Hong, Tianzhen; Piette, Mary Ann; Chen, Yixing; Lee, Sang Hoon; Taylor-Lange, Sarah C.; Zhang, Rongpeng; Sun, Kaiyu; Price, Phillip

2015-01-01

Highlights: • Commercial Building Energy Saver is a powerful toolkit for energy retrofit analysis. • CBES provides benchmarking, load shape analysis, and model-based retrofit assessment. • CBES covers 7 building types, 6 vintages, 16 climates, and 100 energy measures. • CBES includes a web app, API, and a database of energy efficiency performance. • CBES API can be extended and integrated with third party energy software tools. - Abstract: Small commercial buildings in the United States consume 47% of the total primary energy of the buildings sector. Retrofitting small and medium commercial buildings poses a huge challenge for owners because they usually lack the expertise and resources to identify and evaluate cost-effective energy retrofit strategies. This paper presents the Commercial Building Energy Saver (CBES), an energy retrofit analysis toolkit, which calculates the energy use of a building, identifies and evaluates retrofit measures in terms of energy savings, energy cost savings and payback. The CBES Toolkit includes a web app (APP) for end users and the CBES Application Programming Interface (API) for integrating CBES with other energy software tools. The toolkit provides a rich set of features including: (1) Energy Benchmarking providing an Energy Star score, (2) Load Shape Analysis to identify potential building operation improvements, (3) Preliminary Retrofit Analysis which uses a custom developed pre-simulated database and, (4) Detailed Retrofit Analysis which utilizes real-time EnergyPlus simulations. CBES includes 100 configurable energy conservation measures (ECMs) that encompass IAQ, technical performance and cost data, for assessing 7 different prototype buildings in 16 climate zones in California and 6 vintages. A case study of a small office building demonstrates the use of the toolkit for retrofit analysis. The development of CBES provides a new contribution to the field by providing a straightforward and uncomplicated decision

Pre-prosthetic surgery: Mandible

Directory of Open Access Journals (Sweden)

Veeramalai Naidu Devaki

2012-01-01

Full Text Available Pre-prosthetic surgery is that part of oral and maxillofacial surgery which restores oral function and facial form. This is concerned with surgical modification of the alveolar process and its surrounding structures to enable the fabrication of a well-fitting, comfortable, and esthetic dental prosthesis. The ultimate goal of pre-prosthetic surgery is to prepare a mouth to receive a dental prosthesis by redesigning and smoothening bony edges.

Free ammonia pre-treatment of secondary sludge significantly increases anaerobic methane production.

Science.gov (United States)

Wei, Wei; Zhou, Xu; Wang, Dongbo; Sun, Jing; Wang, Qilin

2017-07-01

Energy recovery in the form of methane from sludge/wastewater is restricted by the poor and slow biodegradability of secondary sludge. An innovative pre-treatment technology using free ammonia (FA, i.e. NH 3 ) was proposed in this study to increase anaerobic methane production. The solubilisation of secondary sludge was significantly increased after FA pre-treatment at up to 680 mg NH 3 -N/L for 1 day, under which the solubilisation (i.e. 0.4 mg SCOD/mg VS; SCOD: soluble chemical oxygen demand; VS: volatile solids) was >10 times higher than that without FA pre-treatment (i.e. 0.03 mg SCOD/mg VS). Biochemical methane potential assays showed that FA pre-treatment at above 250 mg NH 3 -N/L is effective in improving anaerobic methane production. The highest improvement in biochemical methane potential (B 0 ) and hydrolysis rate (k) was achieved at FA concentrations of 420-680 mg NH 3 -N/L, and was determined as approximately 22% (from 160 to 195 L CH 4 /kg VS added) and 140% (from 0.22 to 0.53 d -1 ) compared to the secondary sludge without pre-treatment. More analysis revealed that the FA induced improvement in B 0 and k could be attributed to the rapidly biodegradable substances rather than the slowly biodegradable substances. Economic and environmental analyses showed that the FA-based technology is economically favourable and environmentally friendly. Since this FA technology aims to use the wastewater treatment plants (WWTPs) waste (i.e. anaerobic digestion liquor) to enhance methane production from the WWTPs, it will set an example for the paradigm shift of the WWTPs from 'linear economy' to 'circular economy'. Copyright © 2017 Elsevier Ltd. All rights reserved.

Are pre-treatment psychological characteristics influenced by pre-surgical orthodontics?

Science.gov (United States)

Cunningham, S J; Gilthorpe, M S; Hunt, N P

2001-12-01

A number of investigations have looked at psychological changes occurring in association with orthognathic treatment. However, most of these studies have used a pre-surgery questionnaire as the baseline measurement. There is little data relating to the true baseline, i.e. that prior to any active treatment. Until this aspect is investigated, it is not possible to assume that pre-surgery is an acceptable baseline. This questionnaire based study aimed to assess changes in six psychological outcome measures between T1 (prior to any active treatment) and T2 (following pre-surgical orthodontics/prior to surgery). The outcome variables were: state anxiety, trait anxiety, depression, self-esteem, body image, and facial body image. Sixty-two patients (39 females and 23 males) completed both questionnaires. The results showed that intervention, in the form of orthodontic treatment, had a minimal effect on the chosen psychometric outcome variables. There was a significant reduction in satisfaction with body image amongst patients who initially reported mild to moderate dental/facial problems, whilst a moderate increase in satisfaction occurred in those patients reporting severe conditions initially. Also of note were significant increases in state anxiety amongst older patients whilst trait anxiety showed greater increases in females than males.

Reduction in L10 phase transition temperature of PLD grown FePt thin by pre-annealing pulse laser exposure

International Nuclear Information System (INIS)

Wang, Y.; Rawat, R.S.; Bisht, A.

2013-01-01

A pre-annealing atmospheric pulsed laser exposure was applied to decrease the phase transition (from chemically disordered A1 phase to chemically ordered L1 0 phase) temperature of FePt nano-particles on a Si (100) substrate. Different pre-annealing laser energy densities of 0.024 and 0.079 J/cm2 were utilized to expose the pulsed laser deposition (PLD) FePt thin film samples under atmospheric conditions. Subsequently, FePt thin film samples were annealed at different temperatures of 300 and 400 ºC to observe the influence of laser exposure on the phase transition temperature. The phase transition temperature was decreased from conventional 600 ºC to 400 ºC by one shot pre-annealing atmospheric pulsed laser exposure. (author)

Nutritional practices in full-day-care pre-schools.

LENUS (Irish Health Repository)

Jennings, A

2011-06-01

Full-day-care pre-schools contribute significantly to the nutritional intake and acquisition of dietary habits of the pre-school child. The present study investigated nutritional practices in full-day-care pre-schools in Dublin, Ireland, aiming to determine the nutritional support that pre-school managers deem necessary, thereby facilitating the amelioration of existing pre-school nutritional training and practices.

Energy emergency planning guide: Winter 1977-78

Energy Technology Data Exchange (ETDEWEB)

1977-11-01

This Energy Emergency Planning Guide for Winter, 1977-78 has been prepared in order to: identify and evaluate actions available to deal with energy emergencies this winter; provide an advance indication to the public of those actions considered most likely to be taken by the government, and provide industry, state, and local governments with suggestions about actions which they can take to deal with energy emergencies. The Guide contains specifications for over 50 standby programs and procedures, recommended implementation guidelines for using these programs keyed to a pre-emergency phase and three phases of shortfalls, and a design for an Energy Emergency Center. Flexible implementation guidelines are proposed for natural gas, petroleum, electricity/coal, and propane shortages. (MCW)

Surrogate-based optimization of hydraulic fracturing in pre-existing fracture networks

Science.gov (United States)

Chen, Mingjie; Sun, Yunwei; Fu, Pengcheng; Carrigan, Charles R.; Lu, Zhiming; Tong, Charles H.; Buscheck, Thomas A.

2013-08-01

Hydraulic fracturing has been used widely to stimulate production of oil, natural gas, and geothermal energy in formations with low natural permeability. Numerical optimization of fracture stimulation often requires a large number of evaluations of objective functions and constraints from forward hydraulic fracturing models, which are computationally expensive and even prohibitive in some situations. Moreover, there are a variety of uncertainties associated with the pre-existing fracture distributions and rock mechanical properties, which affect the optimized decisions for hydraulic fracturing. In this study, a surrogate-based approach is developed for efficient optimization of hydraulic fracturing well design in the presence of natural-system uncertainties. The fractal dimension is derived from the simulated fracturing network as the objective for maximizing energy recovery sweep efficiency. The surrogate model, which is constructed using training data from high-fidelity fracturing models for mapping the relationship between uncertain input parameters and the fractal dimension, provides fast approximation of the objective functions and constraints. A suite of surrogate models constructed using different fitting methods is evaluated and validated for fast predictions. Global sensitivity analysis is conducted to gain insights into the impact of the input variables on the output of interest, and further used for parameter screening. The high efficiency of the surrogate-based approach is demonstrated for three optimization scenarios with different and uncertain ambient conditions. Our results suggest the critical importance of considering uncertain pre-existing fracture networks in optimization studies of hydraulic fracturing.

Pre-coating of LSCM perovskite with metal catalyst for scalable high performance anodes

KAUST Repository

Boulfrad, Samir

2013-07-01

In this work, a highly scalable technique is proposed as an alternative to the lab-scale impregnation method. LSCM-CGO powders were pre-coated with 5 wt% of Ni from nitrates. After appropriate mixing and adequate heat treatment, coated powders were then dispersed into organic based vehicles to form a screen-printable ink which was deposited and fired to form SOFC anode layers. Electrochemical tests show a considerable enhancement of the pre-coated anode performances under 50 ml/min wet H2 flow with polarization resistance decreased from about 0.60cm2 to 0.38 cm2 at 900 C and from 6.70 cm2 to 1.37 cm2 at 700 C. This is most likely due to the pre-coating process resulting in nano-scaled Ni particles with two typical sizes; from 50 to 200 nm and from 10 to 40 nm. Converging indications suggest that the latter type of particle comes from solid state solution of Ni in LSCM phase under oxidizing conditions and exsolution as nanoparticles under reducing atmospheres. Copyright © 2013, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.

(Value Stream Costing As A New Costing System)

OpenAIRE

Karcıoğlu, Reşar; Nuray, Meral

2010-01-01

In recent years, the number of lean company which use lean manufacturing system is rising. This companies use the standard costing while appropriate for traditional bathch manufacturing. But standard costing system fails to support the goals of lean manufacturing system. A different method of costing based upon the characteristics of the value stream is needed to fulfill the needs of the lean company. This systemis Value Stream Costing. When a lean company moves to value stream management, th...

Design, Construction, Demonstration and Delivery of an Automated Narrow Gap Welding System.

Science.gov (United States)

1982-06-29

DESIGN, CONSTRUCTION, DEMONSTRATION AND DELIVERY OF WE DA4I &NARROW GAP CONTRACT NO. NOOGOO-81-C-E923 TO DAVID TAYLOR NAVAL RESEARCH AND DEVELOPMENT...the automated * Narrow Gap welding process, is the narrow (3/8 - inch), square-butt joint *design. This narrow joint greatly reduces the volume of weld...AD-i45 495 DESIGN CONSTRUCTION DEMONSTRATION AiND DELIVERY OF RN 1/j AUrOMATED NARROW GAP WELDING SYSTEMI() CRC AUTOMATIC WELDING CO HOUSTON TX 29

Radio Observations of Elongated Pulsar Wind Nebulae

Science.gov (United States)

Ng, Stephen C.-Y.

2015-08-01

The majority of pulsars' rotational energy is carried away by relativistic winds, which are energetic particles accelerated in the magnetosphere. The confinement of the winds by the ambient medium result in synchrotron bubbles with broad-band emission, which are commonly referred to as pulsar wind nebulae (PWNe). Due to long synchrotron cooling time, a radio PWN reflects the integrated history of the system, complementing information obtained from the X-ray and higher energy bands. In addition, radio polarization measurements can offer a powerful probe of the PWN magnetic field structure. Altogether these can reveal the physical conditions and evolutionary history of a system.I report on preliminary results from high-resolution radio observations of PWNe associated with G327.1-1.1, PSRs J1015-5719, B1509-58, and J1549-4848 taken with the Australia Telescope Compact Array (ATCA). Their magnetic field structure and multiwavelength comparison with other observations are discussed.This work is supported by a ECS grant of the Hong Kong Government under HKU 709713P. The Australia Telescope is funded by the Commonwealth of Australia for operation as a National Facility managed by CSIRO.

Energy efficiency and pulmonary artery flow after balloon pulmonary angioplasty for inoperable, chronic thromboembolic pulmonary hypertension: Analysis by phase-contrast MRI

Energy Technology Data Exchange (ETDEWEB)

Nagao, Michinobu, E-mail: nagao.michinobu@twmu.ac.jp [Department of Diagnostic Imaging & Nuclear Medicine, Tokyo Women’s Medical University, Tokyo (Japan); Yamasaki, Yuzo [Department of Clinical Radiology, Graduate School of Medical Sciences, Kyushu University, Fukuoka (Japan); Abe, Kohtaro; Hosokawa, Kazuya [Department of Cardiovascular Medicine, Graduate School of Medical Sciences, Kyushu University, Fukuoka (Japan); Kawanami, Satoshi [Department of Molecular Imaging & Diagnosis, Graduate School of Medical Sciences, Kyushu University, Fukuoka (Japan); Kamitani, Takeshi; Yamanouchi, Torahiko [Department of Clinical Radiology, Graduate School of Medical Sciences, Kyushu University, Fukuoka (Japan); Yabuuchi, Hidetake [Department of Medical Sciences, Graduate School of Medical Sciences, Kyushu University, Fukuoka (Japan); Fukushima, Kenji [Department of Diagnostic Imaging & Nuclear Medicine, Tokyo Women’s Medical University, Tokyo (Japan); Honda, Hiroshi [Department of Clinical Radiology, Graduate School of Medical Sciences, Kyushu University, Fukuoka (Japan)

2017-02-15

Purpose: The aims of this study were to propose a new quantitative method for pulmonary artery (PA) flow energetics using phase-contrast magnetic resonance imaging (PC-MRI), and to investigate how balloon pulmonary angioplasty (BPA) impacts energetics in chronic thromboembolic pulmonary hypertension (CTEPH). Materials and methods: PC-MRI at 3-Teslar and with a flow sensitive gradient echo was used to examine energetics prior to and following BPA for 24 CTEPH patients. Stroke volume (m; ml) and mean velocity (V; mm/s) for the main pulmonary artery (PA), right PA, and left PA were calculated from a time-flow curve derived from PC-MRI. Based on the Bernoulli principle, PA energy was identified as 1/2 mV{sup 2} (μj/kg), and energy loss was defined as the following equation “energy loss = main PA energy − (rt. PA energy + lt. PA energy)”. Results: Right PA energy was significantly greater post-BPA than pre-BPA (61 ± 55 vs. 32 ± 40 μj/kg). There was no difference in main PA and left PA energies. Energy loss was significantly decreased post-BPA (18 ± 97 μj/kg) than pre-BPA (79 ± 125 μj/kg). An optimal cutoff of left PA energy of 45 μj/kg pre-BPA can be used to predict patients with mPAP ≥ 30 mmHg after BPA, with an area under the curve of 0.91, 78% sensitivity, and 92% specificity. Conclusion: Analysis of PA energetics using phase-contrast MRI demonstrates that BPA improves energy loss in CTEPH. In addition, BPA responses can be predicted by PA energy status pre-treatment.

Układ odpornościowy a inne systemy poznawcze

Directory of Open Access Journals (Sweden)

Uri Hershberg

2011-12-01

Full Text Available In the following pages we propose a theory on cognitive systems and the com-mon strategies of perception, which are at the basis of their function. We demon-strate that these strategies are easily seen to be in place in known cognitive sys-tems such as vision and language. Furthermore we show that taking these strat-egies into consideration implies a new outlook on immune function calling for a new appraisal of the immune system as a cognitive system.

Models of high energy nuclear collisions

International Nuclear Information System (INIS)

Glendenning, N.K.

1978-06-01

The discussion covers nuclear collisions at relativistic energies including classes of high energy nucleus--nucleus collisions, and the kinetics of a central collision; and the asymptotic hadron spectrum including known and unknown hadrons, the relevance of the spectrum and the means of its study, thermodynamics of hadronic matter, examples of hadronic spectra, the temperature, composition of the initial fireball and its expansion, isoergic expansion with no pre-freezeout radiation, isentropic expansion of the fireball, the quasi-dynamical expansion, and finally antinuclei, hypernuclei, and the quark phase. 28 references

The combined toroidicity, ellipticity and triangularity effects on the energy deposition of Alfven modes in pre-heated, low aspect ratio tokamaks

Energy Technology Data Exchange (ETDEWEB)

Cuperman, S. [School of Physics and Astronomy, Tel Aviv University, 69978 Tel-Aviv (Israel); Bruma, C. [School of Physics and Astronomy, Tel Aviv University, 69978 Tel-Aviv (Israel) and College of Judea and Samaria, 44837 Ariel (Israel)]. E-mail: edycb@post.tau.ac.il; Komoshvili, K. [School of Physics and Astronomy, Tel Aviv University, 69978 Tel-Aviv (Israel); College of Judea and Samaria, 44837 Ariel (Israel)

2007-03-05

The combined plasma non-uniformity effects on the energy deposition of Alfven waves launched by an external antenna in pre-heated spherical tokamaks are investigated. The following relevant physical processes are here possible: (a) the emergence of gaps in the shear Alfven continuum spectrum and the generation of discrete global Alfven eigenmodes with frequencies inside the gaps; (b) multi-wave interactions, interactions of gaps of the same kind (e.g., toroidicity induced) and of different kinds (toroidicity, ellipticity and triangularity induced) as well as of secondary order gaps arising when a pair of modes is coupled to one or more modes through other coupling parameters; (c) basic wave-plasma interactions as propagation, reflection, mode-conversion, tunneling and deposition. Thus, we solved numerically the full 2D wave equations for the vector and scalar potentials, using a quite general two-fluid resistive tensor-operator, without any geometrical limitations. The results obtained indicate the existence of antenna-launched wave characteristics for which the power is most efficiently coupled in outer regions of plasmas, which is of special interest for low aspect ratio tokamaks, e.g., for the generation of non-inductive current drive as well as for turbulence suppression and transport barriers formation.

Pre-genomic, genomic and post-genomic study of microbial communities involved in bioenergy.

Science.gov (United States)

Rittmann, Bruce E; Krajmalnik-Brown, Rosa; Halden, Rolf U

2008-08-01

Microorganisms can produce renewable energy in large quantities and without damaging the environment or disrupting food supply. The microbial communities must be robust and self-stabilizing, and their essential syntrophies must be managed. Pre-genomic, genomic and post-genomic tools can provide crucial information about the structure and function of these microbial communities. Applying these tools will help accelerate the rate at which microbial bioenergy processes move from intriguing science to real-world practice.

Maternal pre-pregnancy obesity and risk for inattention and negative emotionality in children.

Science.gov (United States)

Rodriguez, Alina

2010-02-01

This study aimed to replicate and extend previous work showing an association between maternal pre-pregnancy adiposity and risk for attention deficit hyperactivity disorder (ADHD) symptoms in children. A Swedish population-based prospective pregnancy-offspring cohort was followed up when children were 5 years old (N = 1,714). Mothers and kindergarten teachers rated children's ADHD symptoms, presence and duration of problems, and emotionality. Dichotomized outcomes examined difficulties of clinical relevance (top 15% of the distribution). Analyses adjusted for pregnancy (maternal smoking, depressive symptoms, life events, education, age, family structure), birth outcomes (birth weight, gestational age, infant sex) and concurrent variables (family structure, maternal depressive symptoms, parental ADHD symptoms, and child overweight) in an attempt to rule out confounding. Maternal pre-pregnancy overweight and obesity predicted high inattention symptom scores and obesity was associated with a two-fold increase in risk of difficulties with emotion intensity and emotion regulation according to teacher reports. Means of maternal ratings were unrelated to pre-pregnancy body mass index (BMI). Presence and duration of problems were associated with both maternal over and underweight according to teachers. Despite discrepancies between maternal and teacher reports, these results provide further evidence that maternal pre-pregnancy overweight and obesity are associated with child inattention symptoms and extend previous work by establishing a link between obesity and emotional difficulties. Maternal adiposity at the time of conception may be instrumental in programming child mental health, as prenatal brain development depends on maternal energy supply. Possible mechanisms include disturbed maternal metabolic function. If maternal pre-pregnancy obesity is a causal risk factor, the potential for prevention is great.

75 FR 70224 - New York Tidal Energy Company; Notice Concluding Pre-Filing Process and Approving Process Plan...

Science.gov (United States)

2010-11-17

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Project No. 12665-003] New York Tidal... Tidal Energy Company. e. Name of Project: East River Tidal Energy Pilot Project. f. Location: In the...-6405. i. FERC Contact: Timothy Konnert (202) 502-6359. j. New York Tidal Energy Company (NYTEC) has...

Pre-operative haematological investigations in paediatric orofacial ...

African Journals Online (AJOL)

Pre-operative haematological investigations in paediatric orofacial cleft repair: Any relevance to management outcome? ... Aim and Objectives: To determine the value of routine pre-operative haematologic investigations in children undergoing orofacial cleft repair. Background: Although routine pre-operative laboratory ...

Central Plant Optimization for Waste Energy Reduction (CPOWER). ESTCP Cost and Performance Report

Science.gov (United States)

2016-12-01

meet all demands, and not necessarily for fuel economy or energy efficiency. Plant operators run the equipment according to a pre-set, fixed strategy ...exchanger, based on the site protocol. Thermal Energy Storage Tank Site-specific optimal operating strategies were developed for the chilled water...being served by the central plant Hypothesis The hypothesis tested that the optimized operation reduces wasted energy and energy costs by smart

Who are the young adult Danish pre-drinkers and why do they pre-drink before a night out?

DEFF Research Database (Denmark)

Østergaard, Jeanette; Andrade, Stefan Bastholm

2014-01-01

cannot explain whether a young person will pre-drink on an event-specific night out, young people's income level and their motives explain the quantities they consume. Lower-earning males who pre-drank to save money consumed larger quantities of alcohol at home, but lower-earning females pre-drank larger...

Exascale for Energy: The Role of Exascale Computing in Energy Security

Energy Technology Data Exchange (ETDEWEB)

Authors, Various

2010-07-15

How will the United States satisfy energy demand in a tightening global energy marketplace while, at the same time, reducing greenhouse gas emissions? Exascale computing -- expected to be available within the next eight to ten years ? may play a crucial role in answering that question by enabling a paradigm shift from test-based to science-based design and engineering. Computational modeling of complete power generation systems and engines, based on scientific first principles, will accelerate the improvement of existing energy technologies and the development of new transformational technologies by pre-selecting the designs most likely to be successful for experimental validation, rather than relying on trial and error. The predictive understanding of complex engineered systems made possible by computational modeling will also reduce the construction and operations costs, optimize performance, and improve safety. Exascale computing will make possible fundamentally new approaches to quantifying the uncertainty of safety and performance engineering. This report discusses potential contributions of exa-scale modeling in four areas of energy production and distribution: nuclear power, combustion, the electrical grid, and renewable sources of energy, which include hydrogen fuel, bioenergy conversion, photovoltaic solar energy, and wind turbines. Examples of current research are taken from projects funded by the U.S. Department of Energy (DOE) Office of Science at universities and national laboratories, with a special focus on research conducted at Lawrence Berkeley National Laboratory.

Energetics of the ruthenium-halide bond in olefin metathesis (pre)catalysts

KAUST Repository

Falivene, Laura; Poater, Albert; Cazin, Catherine S J; Slugovc, Christian; Cavallo, Luigi

2013-01-01

A DFT analysis of the strength of the Ru-halide bond in a series of typical olefin metathesis (pre)catalysts is presented. The calculated Ru-halide bond energies span the rather broad window of 25-43 kcal mol-1. This indicates that in many systems dissociation of the Ru-halide bond is possible and is actually competitive with dissociation of the labile ligand generating the 14e active species. Consequently, formation of cationic Ru species in solution should be considered as a possible event. © 2013 The Royal Society of Chemistry.

Hot zone evolution and pre-equilibrium emission in interactions between nuclei

International Nuclear Information System (INIS)

Jakobsson, B.; Karlsson, L.

1990-01-01

The evolution of the hot- and cold zones in intermediate energy nucleus-nucleus collisions by means of spherically expanding volumes and transport equations based on the Fermi-Dirac equation of state is described. Though the dynamical evolution of the collision is similar to that in Vlasov-Uehling-Uhlenbeck (VUU) calculations, some differences in the spectral shapes of emitted nucleons are found. The pre-equilibrium particle emission, prior to the breakup- or to the evaporation stage is always found to be an important contribution to the nucleon spectra which show reasonable agreement with data. (orig.)

Understanding Pre-Quantitative Risk in Projects

Science.gov (United States)

Cooper, Lynne P.

2011-01-01

Standard approaches to risk management in projects depend on the ability of teams to identify risks and quantify the probabilities and consequences of these risks (e.g., the 5 x 5 risk matrix). However, long before quantification does - or even can - occur, and long after, teams make decisions based on their pre-quantitative understanding of risk. These decisions can have long-lasting impacts on the project. While significant research has looked at the process of how to quantify risk, our understanding of how teams conceive of and manage pre-quantitative risk is lacking. This paper introduces the concept of pre-quantitative risk and discusses the implications of addressing pre-quantitative risk in projects.

Pre-meal inulin consumption does not affect acute energy intake in overweight and obese middle-aged and older adults: A randomized controlled crossover pilot trial.

Science.gov (United States)

Smiljanec, Katarina; Mitchell, Cassie M; Privitera, Olivia F; Neilson, Andrew P; Davy, Kevin P; Davy, Brenda M

2017-06-01

Three-fourths of adults older than 55 years in the United States are overweight or obese. Prebiotics including inulin-type fructans may benefit with weight management. We aimed to investigate the acute effects of pre-meal inulin consumption on energy intake (EI) and appetite in older adults. Sedentary, overweight or obese middle-aged and older adults ( n = 7, 60.9 ± 4.4 years, BMI 32.9 ± 4.3 kg/m 2 ) ingested inulin (10 g) or a water preload before each test period in a randomly assigned order. EI, appetite and gastrointestinal symptoms were monitored during the following 24 h. No differences in EI were noted between conditions (inulin: 14744 ± 5552 kJ, control: 13924 ± 4904 kJ, p > 0.05). Rumbling was increased with inulin consumption ( p inulin consumption does not acutely decrease EI or suppress appetite in older adults. Further research should address individual differences among diets, eating behaviors, and microbiota profiles.

3D finite element analysis of stress distributions and strain energy release rates for adhesive bonded flat composite lap shear joints having pre-existing delaminations

Energy Technology Data Exchange (ETDEWEB)

Parida, S. K.; Pradhan, A. K. [Indian Institute of Technology, Bhubaneswar (India)

2014-02-15

The rate of propagation of embedded delamination in the strap adherend of lap shear joint (LSJ) made of carbon/epoxy composites has been evaluated employing three-dimensional non-linear finite elements. The delamination has been presumed to pre-exist in the thin resin layer between the first and second plies of the strap adherend. The inter-laminar peel and shear stress distributions have been studied in details and are seen to be predominantly three-dimensional in nature. The components of strain energy release rate (SERR) corresponding to the opening, sliding and cross sliding modes of delamination are significantly different at the two fronts of the embedded delamination. The sequential release of multi-point constraint (MPC) finite elements in the vicinity of the delamination fronts enables to simulate the growth of the delamination at either ends. This simulation procedure can be utilized effectively for evaluation of the status of the structural integrity of the bonded joints.

Study on the method and mechanism of pre-pressure coagulation and sedimentation for Microcystis removal from drinking-water sources.

Science.gov (United States)

Cong, Haibing; Sun, Feng; Chen, Wenjing; Xu, Yajun; Wang, Wei

2018-02-01

In order to effectively remove the Microcystis from drinking-water sources, pre-pressure treatment was first used to make the Microcystis lose buoyancy, and then it is easily removed by coagulation and sedimentation processes. The Microcystis-containing water from Taihu Lake was taken for the pre-pressure coagulation and sedimentation treatments in this study. Both intermittent laboratory experiment and continuous-flow field experiment were conducted. Experimental results showed that the optimum pre-pressure condition was pressuring at 0.6-0.8 MPa for at least 10 s, and 60 s was the best. Comparing with the pre-oxidation, pre-pressure could obviously increase the removal efficiency of Microcystis by following coagulation and sedimentation, and would not increase the dissolved microcystins. The mechanism of pre-pressure treatment was that the pre-pressure destroys the gas vesicles in Microcystis cells and the gas diffuses out of the cells, which leads the Microcystis to lose buoyancy and make them to sink. The recovery time of gas vesicles was longer than the sludge discharge period of sedimentation tank; therefore, the sinking Microcystis would not re-float in the sedimentation tank. In the practical application of drinking water treatment plant, the continuous-flow pressure device could be chosen, with the energy consumption of about 22.9 kw·h per 10,000 m 3 .

An evaluation of a pre-charging pulse-jet filter for small combustor particulate control

Energy Technology Data Exchange (ETDEWEB)

Quimby, J.M.

1990-04-01

The objective of this test program is the performance and economic evaluation of a pre charged-pulse jet filter as the principal particulate control device for a commercial or industrial scale coal fired combustor. Performance factors that will be considered are the effects of particle charge, air/cloth ratio, fabric types, percent humidity and inlet particulate loading on fine particle collection efficiency, and pressure drop. Economic factors that will be considered are capital costs, energy and other operating costs, and maintenance costs. The program will result in a recommendation regarding the relative suitability of the pre charged pulse-jet filter for small combustor particulate control, as compared to other control devices. Fine particle control capability, ease of operation, and overall economics will be taken into consideration in making comparisons.

Type 2 diabetes mellitus is associated with increased risks of sarcopenia and pre-sarcopenia in Chinese elderly.

Science.gov (United States)

Wang, Taotao; Feng, Xiao; Zhou, Jingjing; Gong, Hongyan; Xia, Song; Wei, Qing; Hu, Xu; Tao, Ran; Li, Lei; Qian, Frank; Yu, Li

2016-12-13

Sarcopenia is a condition characterized by progressive and generalized loss of skeletal muscle mass and function. In this study, we used a cross-sectional study with 1090 community-dwelling Chinese citizens aged 60 years and older to evaluate the association of type 2 diabetes mellitus (T2DM) with the risk of sarcopenia and pre-sarcopenia. Sarcopenia was defined using the Asian Working Group for Sarcopenia (AWGS) criteria that include both muscle mass and muscle function/physical activity. Pre-sarcopenia was defined as having low skeletal muscle index but with normal muscle/physical activity. The prevalence of sarcopenia and pre-sarcopenia was significantly higher in T2DM patients than in healthy controls (14.8% vs. 11.2%, p = 0.035 for sarcopenia, and 14.4% vs. 8.4%, p = 0.002 for pre-sarcopenia). In multivariate logistic regression analyses adjusting by age, gender, anti-diabetic medication, energy intake, protein intake, physical activity, and visceral fat area, we found that Chinese elderly with T2DM exhibited significantly increased risks of sarcopenia (OR = 1.37, 95% CI = 1.02-2.03) and pre-sarcopenia (OR = 1.73, 95% CI = 1.10-2.83) compared to non-diabetic individuals. This is the first study to evaluate the association of T2DM with the risks of sarcopenia and pre-sarcopenia in China. Among a group of community-dwelling Chinese elderly, T2DM was significantly associated with increased risks of sarcopenia and pre-sarcopenia.

Type 2 diabetes mellitus is associated with increased risks of sarcopenia and pre-sarcopenia in Chinese elderly

Science.gov (United States)

Wang, Taotao; Feng, Xiao; Zhou, Jingjing; Gong, Hongyan; Xia, Song; Wei, Qing; Hu, Xu; Tao, Ran; Li, Lei; Qian, Frank; Yu, Li

2016-01-01

Sarcopenia is a condition characterized by progressive and generalized loss of skeletal muscle mass and function. In this study, we used a cross-sectional study with 1090 community-dwelling Chinese citizens aged 60 years and older to evaluate the association of type 2 diabetes mellitus (T2DM) with the risk of sarcopenia and pre-sarcopenia. Sarcopenia was defined using the Asian Working Group for Sarcopenia (AWGS) criteria that include both muscle mass and muscle function/physical activity. Pre-sarcopenia was defined as having low skeletal muscle index but with normal muscle/physical activity. The prevalence of sarcopenia and pre-sarcopenia was significantly higher in T2DM patients than in healthy controls (14.8% vs. 11.2%, p = 0.035 for sarcopenia, and 14.4% vs. 8.4%, p = 0.002 for pre-sarcopenia). In multivariate logistic regression analyses adjusting by age, gender, anti-diabetic medication, energy intake, protein intake, physical activity, and visceral fat area, we found that Chinese elderly with T2DM exhibited significantly increased risks of sarcopenia (OR = 1.37, 95% CI = 1.02–2.03) and pre-sarcopenia (OR = 1.73, 95% CI = 1.10–2.83) compared to non-diabetic individuals. This is the first study to evaluate the association of T2DM with the risks of sarcopenia and pre-sarcopenia in China. Among a group of community-dwelling Chinese elderly, T2DM was significantly associated with increased risks of sarcopenia and pre-sarcopenia. PMID:27958337

Review on pre-eclampsia

OpenAIRE

Schlembach, Dietmar

2003-01-01

Pre-eclampsia is still one of the leading causes of maternal and fetal morbidity and mortality. Despite active research for many decades, the etiology of this disorder exclusive to human pregnancy is an enigma. Recent evidence suggests there may be several underlying causes or predispositions leading to endothelial dysfunction and causing the signs of hypertension, proteinuria, and edema--findings that allow us to make the diagnosis of the "syndrome" of pre-eclampsia. It is obvious that a sin...

Pre-Assessment: Promises and Cautions

Science.gov (United States)

Guskey, Thomas R.; McTighe, Jay

2016-01-01

Nearly every modern instructional planning model, differentiation approach, and personalized learning system incorporates some form of re-assessment. Yet there's scant research evidence that teachers use pre-assessment in ways that improve learning, according to Guskey and McTighe. To increase the likelihood that pre-assessment will be worth the…

The Pre-IPO Dividend Puzzle

NARCIS (Netherlands)

Martin, J.; Zeckhauser, R.

2011-01-01

We investigate dividend payments of companies prior to their IPOs. U.S. companies conducting an IPO between 1990 through 2006 comprise our sample. Pre-IPO dividend payments are significant both in number and size in the quarter leading up to the IPO. We find support for the hypothesis that pre-IPO

Blood donors’ physical characteristics are associated with pre- and post-donation symptoms - Donor InSight

Science.gov (United States)

van den Hurk, Katja; Peffer, Karlijn; Habets, Karin; Atsma, Femke; Pasker-de Jong, Pieternel C.M.; van Noord, Paulus A.H.; Veldhuizen, Ingrid J.T.; de Kort, Wim L.A.M.

2017-01-01

Background Observational data suggest that some donors might benefit from donating while others may be harmed. The aim of this study was to investigate the prevalence and potential, routinely measured, determinants of pre- and post-donation symptoms. Materials and methods In Donor InSight, questionnaire data from 23,064 whole blood donors (53% female) were linked to routinely measured data on donors’ physical characteristics (haemoglobin, blood pressure, body mass index and estimated blood volume) from the Dutch donor database. Absolute and relative associations between donors’ physical donor and the presence of pre- and post-donation symptoms were studied using multivariable logistic regression. Results Pre-donation symptoms (lack of energy, headaches) were reported by 3% of men and 3% of women. Five percent of men and 4% of women reported positive post-donation symptoms (feeling fit, fewer headaches). Negative symptoms (fatigue, dizziness) were more common, occurring in 8% of men and 19% of women. All the studied donors’ physical characteristics were positively associated with pre- and positive post-donation symptoms and negatively associated with negative symptoms. Body mass index was most consistently and independently associated with symptoms. Discussion Donors’ physical characteristics, in particular body mass index, were consistently associated with pre- and post-donation symptoms. This indicates that subgroups of donors more and less tolerant to donation might be identifiable using routinely measured data. Further research is warranted to study underlying mechanisms and potential strategies to predict and prevent donor reactions. PMID:27416579

Pre-T Cell Receptors (Pre-TCRs) Leverage Vβ Complementarity Determining Regions (CDRs) and Hydrophobic Patch in Mechanosensing Thymic Self-ligands.

Science.gov (United States)

Das, Dibyendu Kumar; Mallis, Robert J; Duke-Cohan, Jonathan S; Hussey, Rebecca E; Tetteh, Paul W; Hilton, Mark; Wagner, Gerhard; Lang, Matthew J; Reinherz, Ellis L

2016-12-02

The pre-T cell receptor (pre-TCR) is a pTα-β heterodimer functioning in early αβ T cell development. Although once thought to be ligand-autonomous, recent studies show that pre-TCRs participate in thymic repertoire formation through recognition of peptides bound to major histocompatibility molecules (pMHC). Using optical tweezers, we probe pre-TCR bonding with pMHC at the single molecule level. Like the αβTCR, the pre-TCR is a mechanosensor undergoing force-based structural transitions that dynamically enhance bond lifetimes and exploiting allosteric control regulated via the Cβ FG loop region. The pre-TCR structural transitions exhibit greater reversibility than TCRαβ and ordered force-bond lifetime curves. Higher piconewton force requires binding through both complementarity determining region loops and hydrophobic Vβ patch apposition. This patch functions in the pre-TCR as a surrogate Vα domain, fostering ligand promiscuity to favor development of β chains with self-reactivity but is occluded by α subunit replacement of pTα upon αβTCR formation. At the double negative 3 thymocyte stage where the pre-TCR is first expressed, pre-TCR interaction with self-pMHC ligands imparts growth and survival advantages as revealed in thymic stromal cultures, imprinting fundamental self-reactivity in the T cell repertoire. Collectively, our data imply the existence of sequential mechanosensor αβTCR repertoire tuning via the pre-TCR. © 2016 by The American Society for Biochemistry and Molecular Biology, Inc.

Early pre-eclampsia unmasks underlying IgA nephropathy

Directory of Open Access Journals (Sweden)

Mona Singh

2010-12-01

Full Text Available Mona Singh, Akhenaton Pappoe, Burl R DonDivision of Nephrology, University of California Davis Medical Center, Sacramento, CA, USAAbstract: Pre-eclampsia is the most ominous complication of pregnancy, and primary glomerular diseases can mimic pre-eclampsia in presentation. A patient presented at 21 weeks gestation with signs and symptoms of both pre-eclampsia and primary glomerular nephropathy. A critical clinical decision whether to continue or terminate the pregnancy was dependent on results of a renal biopsy. The biopsy noted the presence of both pre-eclampsia and immunoglobulin A (IgA nephropathy. Thus, the onset of pre-eclampsia unmasked the presence of unrecognized IgA nephropathy, and the IgA nephropathy was a risk factor for this patient developing pre-eclampsia. The results of a renal biopsy are key in distinguishing pre-eclampsia from other kidney diseases and instituting appropriate clinical management.Keywords: proteinuria, IgA nephropathy, renal biopsy, pre-eclampsia

Compressive pre-stress effects on magnetostrictive behaviors of highly textured Galfenol and Alfenol thin sheets

Directory of Open Access Journals (Sweden)

Julia R. Downing

2017-05-01

Full Text Available Fe-Ga (Galfenol and Fe-Al (Alfenol are rare-earth-free magnetostrictive alloys with mechanical robustness and strong magnetoelastic coupling. Since highly textured Galfenol and Alfenol thin sheets along orientations have been developed with magnetostrictive performances of ∼270 ppm and ∼160 ppm, respectively, they have been of great interest in sensor and energy harvesting applications. In this work, we investigate stress-dependent magnetostrictive behaviors in highly textured rolled sheets of NbC-added Fe80Al20 and Fe81Ga19 alloys with a single (011 grain coverage of ∼90%. A compact fixture was designed and used to introduce a uniform compressive pre-stress to those thin sheet samples along a [100] direction. As compressive pre-stress was increased to above 100 MPa, the maximum observed magnetostriction increased 42% in parallel magnetostriction along the stress direction, λ//, in highly textured (011 Fe81Ga19 thin sheets for a compressive pre-stress of 60 MPa. The same phenomena were observed for (011 Fe80Al20 (maximum increase of 88% with a 49 MPa compressive stress. This trend is shown to be consistent with published results on the effect of pre-stress on magnetostriction in rods of single crystal and textured polycrystalline Fe-Ga alloy of similar compositions, and single crystal data gathered using our experimental set up. Interestingly, the saturating field (Hs does not vary with pre-stresses, while the saturating field in rod-shaped samples of Fe-Ga increases with an increase of pre-stress. This suggests that for a range of compressive pre-stresses, thin sheet samples have larger values of d33 transduction coefficients and susceptibility than rod-shaped samples of similar alloy compositions, and hence they should provide performance benefits when used in sensor and actuator device applications. Thus, we discuss potential reasons for the unexpected trends in Hs with pre-stress, and present preliminary results from tests conducted

Legislation of Renewable Energy Sources In Slovakia / Legislatívna Úprava Obnoviteľných Zdrojov Energie Na Slovensku

Directory of Open Access Journals (Sweden)

Marišová Eleonóra

2015-12-01

Full Text Available Pestovanie energetickych rastlin a drevin na poľnohospodarskej pode a ďalšie využitie ich energie predstavuje zasadny vyznam pre realizaciu dlhodobej strategie Slovenska v oblasti ziskavania a využivania obnoviteľnych zdrojov energie (OZE. Energeticke rastliny spĺňaju ciele strategie Europa 2020 a prispievaju k diverzifi kacii energetickych zdrojov. Prispevok vychadza z pravnych predpisov EU a narodnej legislativy upravujucej OZE. Analyzovane su Smernica 2009/28/ES Europskeho parlamentu a Rady z 23. aprila 2009 o podpore využivania energie z obnoviteľnych zdrojov a o zmene a naslednom zrušeni smernic 2001/77/ES a 2003/30/ES. Tema obnoviteľnych zdrojov energie je integrovana do Programu rozvoja vidieka 2014 - 2020. Konkretne Akčny plan pre biomasu 2008-2013, Strategia vyššieho využitia obnoviteľnych zdrojov energie na Slovensku a Strategia energetickej bezpečnosti Slovenska bola prijata až do roku 2030. Trvalo udržateľne využivanie poľnohospodarskej pody, jeho riadenie a využivanie, ako aj ochrana jeho kvality a funkcie su upravene zakonom č 220/2004 Zb. o ochrane a využivani poľnohospodarskej pody a ktorym sa meni zakon č. 245/2003 Zb., o integrovanej prevencii a kontrole znečisťovania životneho prostredia a o zmene niektorych zakonov v zneni neskoršich predpisov, ktory nadobudol učinnosť 1. maja 2004. Zakon č. 57/2013 Zb., ktory je platny od 1. aprila 2013, stanovuje zasady a postup zriaďovania plantaži rychlorastucich drevin na poľnohospodarskej pode. Slovenska pravna uprava zaviedla register rychlo rastucich drevin na každom okresnom urade (72, na pozemkovom a lesnom odbore na Slovensku. Prieskum tychto registrov ukazuje, že tato pravna uprava podporuje poľnohospodarov, aby začali použivať marginalne pody pre rychlo rastuce dreviny.

Pre-Inflationary Relics in the CMB?

CERN Document Server

Gruppuso, A.; Mandolesi, N.; Natoli, P.; Sagnotti, A.

String Theory and Supergravity allow, in principle, to follow the transition of the inflaton from pre-inflationary fast roll to slow roll. This introduces an infrared depression in the primordial power spectrum that might have left an imprint in the CMB anisotropy, if it occurred at accessible wavelengths. We model the effect extending $\\Lambda$CDM with a scale $\\Delta$ related to the infrared depression and explore the constraints allowed by {\\sc Planck} data, employing also more conservative, wider Galactic masks in the low resolution CMB likelihood. In an extended mask with $f_{sky}=39\\%$, we thus find $\\Delta = (0.351 \\pm 0.114) \\times 10^{-3} \\, \\mbox{Mpc}^{-1}$, at $99.4\\%$ confidence level, to be compared with a nearby value at $88.5\\%$ with the standard $f_{sky}=94\\%$ mask. With about 64 $e$--folds of inflation, these values for $\\Delta$ would translate into primordial energy scales ${\\cal O}(10^{14})$ GeV.

IRIS pre-application licensing

International Nuclear Information System (INIS)

Carelli, Mario D.; Kling, Charles L.; Ritterbusch, Stanley E.

2003-01-01

This paper presents the approach to pre-application licensing by the International Reactor Innovative and Secure (IRIS), and advanced, integral reactor design with a thermal power of 1000 MW. The rationale for the pre-application licensing is discussed. Since IRIS technology is based on proven LWR experience, the project will rely on AP600/AP1000 precedent and will focus during the pre-application on long lead and novel items. A discussion of the evolution of the project to significantly reduce licensing issues is provided, followed by a summary of the IRIS safety-by-design which provides a formidable first step in the Defense in Depth approach. The effects of the safety-by-design, as well as of passive systems, on the IRIS safety will be investigated in a proposed testing program that will be reviewed by NRC during the pre-application. Documentation to be provided to NRC is discussed. Early design analyses indicate that the benefits of the IRIS safety-by-design approach are so significant that the basic premise of current emergency planning regulations (i.e., likelihood of core damage) will be reduced to the extent that special emergency response planning beyond the exclusion area boundary may not be needed. How this very significant outcome can be effected through a highly risk-informed licensing is discussed. (author)

Influence of ultrasonication and Fenton oxidation pre-treatment on rheological characteristics of wastewater sludge.

Science.gov (United States)

Pham, T T H; Brar, S K; Tyagi, R D; Surampalli, R Y

2010-01-01

The effect of ultrasonication and Fenton oxidation as physico-chemical pre-treatment processes on the change of rheology of wastewater sludge was investigated in this study. Pre-treated and raw sludges displayed non-Newtonian rheological behaviour with shear thinning as well as thixotropic properties for total solids ranging from 10 g/L to 40 g/L. The rheological models, namely, Bingham plastic, Casson law, NCA/CMA Casson, IPC Paste, and power law were also studied to characterize flow of raw and pre-treated sludges. Among all rheological models, the power law was more prominent in describing the rheology of the sludges. Pre-treatment processes resulted in a decrease in pseudoplasticity of sludge due to the decrease in consistency index K varying from 42.4 to 1188, 25.6 to 620.4 and 52.5 to 317.9; and increase in flow behaviour index n changing from 0.5 to 0.35, 0.62 to 0.55 and 0.63 to 0.58, for RS, UlS and FS, respectively at solids concentration 10-40 g/L. The correlation between improvement of biodegradability and dewaterability, decrease in viscosity, and change in particle size as a function of sludge pre-treatment process was also investigated. Fenton oxidation facilitated sludge filterability resulting in capillary suction time values which were approximately 50% of the raw sludges, whereas ultrasonication with high input energy deteriorated the filterability. Biodegradability was also enhanced by the pre-treatment processes and the maximum value was obtained (64%, 77% and 73% for raw, ultrasonicated and Fenton oxidized sludges, respectively) at total solids concentration of 25 g/L. Hence, pre-treatment of wastewater sludge modified the rheological properties so that: (1) the flowability of sludge was improved for transport through the treatment train (via pipes and pumps); (2) the dewaterability of wastewater sludge was enhanced for eventual disposal and; (3) the assimilation of nutrients by microorganisms for further value-addition was increased.

The Impact of Enactive /Vicarious pre-reading Tasks on Reading Comprehension and Self-Efficacy of Iranian Pre-Intermediate EFL Learners

Directory of Open Access Journals (Sweden)

Arezoo Eshghipour

2016-01-01

Full Text Available This study investigated the effect of enactive pre-reading tasks on Iranian pre-intermediate EFL learners’ reading comprehension and self-efficacy. Moreover, it explored whether Iranian per-intermediate EFL learners’ reading comprehension and self-efficacy are influenced by vicarious pre-reading tasks. The required data was gathered through a reading comprehension passage entailing 20 comprehension questions and a 30-item self-efficacy questionnaire with 5-point Likert-scale response options. A total of 66 participants (including 34 individuals in the enactive group and 32 leaners in the vicarious one took part in this study. The Pearson formula, an independent T-Test, paired T-test, and the Mann-Whitney U test were used to analyze the data. Based on the findings of the study, enactive pre-reading tasks played a key role in the Iranian pre-intermediate EFL learners’ reading comprehension ability. Moreover, it was found that vicarious pre-reading tasks served an important role in the Iranian pre-intermediate EFL learners’ self-efficacy.

Numerical analysis of dynamic behavior of pre-stressed shape memory alloy concrete beam-column joints

Science.gov (United States)

Yan, S.; Xiao, Z. F.; Lin, M. Y.; Niu, J.

2018-04-01

Beam-column joints are important parts of a main frame structure. Mechanical properties of beam-column joints have a great influence on dynamic performances of the frame structure. Shape memory alloy (SMA) as a new type of intelligent metal materials has wide applications in civil engineering. The paper aims at proposing a novel beam-column joint reinforced with pre-stressed SMA tendons to increase its dynamic performance. Based on the finite element analysis (FEA) software ABAQUS, a numerical simulation for 6 beam-column scaled models considering different SMA reinforcement ratios and pre-stress levels was performed, focusing on bearing capacities, energy-dissipation and self-centering capacities, etc. These models were numerically tested under a pseudo-static load on the beam end, companying a constant vertical compressive load on the top of the column. The numerical results show that the proposed SMA-reinforced joint has a significantly increased bearing capacity and a good self-centering capability after unloading even though the energy-dissipation capacity becomes smaller due the less residual deformation. The concept and mechanism of the novel joint can be used as an important reference for civil engineering applications.

Pre-operative biliary drainage for obstructive jaundice

Science.gov (United States)

Fang, Yuan; Gurusamy, Kurinchi Selvan; Wang, Qin; Davidson, Brian R; Lin, He; Xie, Xiaodong; Wang, Chaohua

2014-01-01

Background Patients with obstructive jaundice have various pathophysiological changes that affect the liver, kidney, heart, and the immune system. There is considerable controversy as to whether temporary relief of biliary obstruction prior to major definitive surgery (pre-operative biliary drainage) is of any benefit to the patient. Objectives To assess the benefits and harms of pre-operative biliary drainage versus no pre-operative biliary drainage (direct surgery) in patients with obstructive jaundice (irrespective of a benign or malignant cause). Search methods We searched the Cochrane Hepato-Biliary Group Controlled Trials Register, Cochrane Central Register of Controlled Clinical Trials (CENTRAL) in The Cochrane Library, MEDLINE, EMBASE, and Science Citation Index Expanded until February 2012. Selection criteria We included all randomised clinical trials comparing biliary drainage followed by surgery versus direct surgery, performed for obstructive jaundice, irrespective of the sample size, language, and publication status. Data collection and analysis Two authors independently assessed trials for inclusion and extracted data. We calculated the risk ratio (RR), rate ratio (RaR), or mean difference (MD) with 95% confidence intervals (CI) based on the available patient analyses. We assessed the risk of bias (systematic overestimation of benefit or systematic underestimation of harm) with components of the Cochrane risk of bias tool. We assessed the risk of play of chance (random errors) with trial sequential analysis. Main results We included six trials with 520 patients comparing pre-operative biliary drainage (265 patients) versus no pre-operative biliary drainage (255 patients). Four trials used percutaneous transhepatic biliary drainage and two trials used endoscopic sphincterotomy and stenting as the method of pre-operative biliary drainage. The risk of bias was high in all trials. The proportion of patients with malignant obstruction varied between 60

22 CFR 226.11 - Pre-award policies.

Science.gov (United States)

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Pre-award policies. 226.11 Section 226.11 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT ADMINISTRATION OF ASSISTANCE AWARDS TO U.S. NON-GOVERNMENTAL ORGANIZATIONS Pre-award Requirements § 226.11 Pre-award policies. (a) Use of grants and...

Pre-migration Trauma Exposure and Psychological Distress for Asian American Immigrants: Linking the Pre- and Post-migration Contexts.

Science.gov (United States)

Li, Miao; Anderson, James G

2016-08-01

Drawing on the life course perspective and the assumptive world theory, this paper examines whether pre-migration trauma exposure is associated with psychological distress through post-migration perceived discrimination for Asian American immigrants. The study is based on cross-sectional data from the National Latino and Asian American Study (N = 1639). Structural equation model is used to estimate the relationship between pre-migration trauma, post-migration perceived discrimination, and psychological distress. Additional models are estimated to explore possible variations across ethnic groups as well as across different types of pre-migration trauma experience. Pre-migration trauma exposure is associated with higher levels of psychological distress, both directly and indirectly through higher level of perceived discrimination, even after controlling for demographic/acculturative factors and post-migration trauma exposure. This pattern holds for the following sub-types of pre-migration trauma: political trauma, crime victimization, physical violence, accidental trauma, and relational trauma. Multi-group analyses show that this pattern holds for all Asian immigrant subgroups except the Vietnamese. Studies of immigrant mental health primarily focus on post-migration stressors. Few studies have considered the link between pre- and post-migration contexts in assessing mental health outcomes. The study illustrates the usefulness of bridging the pre- and post-migration context in identifying the mental health risks along the immigrant life course.

Pre-college education

Science.gov (United States)

Stein, Sylvia

1990-01-01

Pre-college education efforts are many and varied, involving the teachers, students, parents, museums, and youth groups. However, it is necessary to reach out to school administration at all levels if teachers are to be innovative in their approaches. This introductory meeting clearly indicated that more interaction between the participants would be profitable. It is clear that the science pipeline leading from kindergarten to college entry needs to be filled with students. What is not clear is how we can do it. The plethora of projects being pursued by the NASA Space Grant College Fellowship (NSGC) programs to accomplish that goal are heartening and exciting. However, this large gamut of programs may also indicate how new we are in this game and how little anyone knows about creating a pre-college interest in science and engineering. In a way, it resembles the situation of the common cold--there is no known cure yet, so there are many so-called remedies. Unfortunately, the time we had together was entirely too short to address the evaluation situation, so that we can in the future zero in on the most effective approaches. This report is a summary of the many ways the different NSGC' s are approaching pre-college education and a list of suggestions.

Preliminary Design Study of a Pre-booster Damping Ring for the FCC e+e− Injector

CERN Document Server

Etisken, O; Papaphilippou, Y

2017-01-01

The aim of the FCC e+e− lepton collider is to collide particles in the energy range 40–175 GeV. The FCC e+e− injector complex needs to produce and transport high-intensity e+e− beams at a fast repetition rate of about 0.1 Hz to top up the collider at its collision energy. A basic parameter set exists for all collider energies, assuming a 10 GeV linac operating with a large number of bunches accumulating in the existing SPS, which serves as pre-accelerator and damping ring before the bunches are transferred to the high-energy booster. The purpose of this study is to provide the conceptual design of an alternative damping and accelerator ring, replacing the SPS in the current scheme. This ring will have an injection energy of around 6 GeV and an extraction energy of around 20 GeV. Apart from establishing the basic ring parameters, the final study will include the optics design and layout, and single particle linear and non-linear dynamics optimization, including magnetic and alignment error tolerances. ...

Pre-crastination in the pigeon.

Science.gov (United States)

Wasserman, Edward A; Brzykcy, Stephen J

2015-08-01

Procrastination is the tendency to delay initiating or completing tasks. Rosenbaum et al. (Psychological Science, May 8, 2014) recently documented the opposite of procrastination: pre-crastination, the tendency to begin or to finish tasks as soon as possible. We devised a simple two-alternative forced-choice task, in which pigeons could choose to switch response location either sooner or later in a sequence of actions eventuating in food reward. Even though there was no economic advantage for doing so, pigeons chose to switch response location sooner rather than later in the sequence, showing pre-crastination to be quite general. Pre-crastination thus joins other anticipatory learning phenomena in challenging rational or optimal accounts of behavioral adaptation.

Clinical target volume delineation in glioblastomas: pre-operative versus post-operative/pre-radiotherapy MRI

Science.gov (United States)

Farace, P; Giri, M G; Meliadò, G; Amelio, D; Widesott, L; Ricciardi, G K; Dall'Oglio, S; Rizzotti, A; Sbarbati, A; Beltramello, A; Maluta, S; Amichetti, M

2011-01-01

Objectives Delineation of clinical target volume (CTV) is still controversial in glioblastomas. In order to assess the differences in volume and shape of the radiotherapy target, the use of pre-operative vs post-operative/pre-radiotherapy T1 and T2 weighted MRI was compared. Methods 4 CTVs were delineated in 24 patients pre-operatively and post-operatively using T1 contrast-enhanced (T1PRECTV and T1POSTCTV) and T2 weighted images (T2PRECTV and T2POSTCTV). Pre-operative MRI examinations were performed the day before surgery, whereas post-operative examinations were acquired 1 month after surgery and before chemoradiation. A concordance index (CI) was defined as the ratio between the overlapping and composite volumes. Results The volumes of T1PRECTV and T1POSTCTV were not statistically different (248 ± 88 vs 254 ± 101), although volume differences >100 cm3 were observed in 6 out of 24 patients. A marked increase due to tumour progression was shown in three patients. Three patients showed a decrease because of a reduced mass effect. A significant reduction occurred between pre-operative and post-operative T2 volumes (139 ± 68 vs 78 ± 59). Lack of concordance was observed between T1PRECTV and T1POSTCTV (CI = 0.67 ± 0.09), T2PRECTV and T2POSTCTV (CI = 0.39 ± 0.20) and comparing the portion of the T1PRECTV and T1POSTCTV not covered by that defined on T2PRECTV images (CI = 0.45 ± 0.16 and 0.44 ± 0.17, respectively). Conclusion Using T2 MRI, huge variations can be observed in peritumoural oedema, which are probably due to steroid treatment. Using T1 MRI, brain shifts after surgery and possible progressive enhancing lesions produce substantial differences in CTVs. Our data support the use of post-operative/pre-radiotherapy T1 weighted MRI for planning purposes. PMID:21045069

Modeling of fuel retention in the pre-damaged tungsten with MeV W ions after exposure to D plasma

Directory of Open Access Journals (Sweden)

Zhenhou Wang

2017-12-01

Full Text Available Modeling of high-Z ion irradiated-induced damages on fuel retention inside tungsten (W material has been performed in this work. The upgraded Hydrogen Isotope Inventory Processes Code (HIIPC is applied to model the deuterium (D retention inside pre-damaged W during exposed to low-energy D flux, and the W is pre-irradiated by 20 MeV W-ion before exposed to D flux. Three types of trap, i.e. mono-vacancies, dislocations and grain boundary vacancies, are considered in the present model. The mono-vacancy defects induced by energetic W ions are calculated by SRIM code. First, the model is validated against the available experimental data under the same D flux exposure conditions, showing the reasonable agreement. Then, the effect of radiation-induced defects produced by pre-exposed energetic W-ion with different energy and fluence on the fuel retention are studied, confirming that the irradiation-induced traps play a dominated role on the fuel retention in the surface of the material (∼ micrometer. Finally, the effects of different type of defect, D fluence, and wall temperature on the fuel retention are discussed systemically, and these modeling results are in well agreement with the previous studies.

The influence of mitigation on sage-grouse habitat selection within an energy development field.

Directory of Open Access Journals (Sweden)

Bradley C Fedy

Full Text Available Growing global energy demands ensure the continued growth of energy development. Energy development in wildlife areas can significantly impact wildlife populations. Efforts to mitigate development impacts to wildlife are on-going, but the effectiveness of such efforts is seldom monitored or assessed. Greater sage-grouse (Centrocercus urophasianus are sensitive to energy development and likely serve as an effective umbrella species for other sagebrush-steppe obligate wildlife. We assessed the response of birds within an energy development area before and after the implementation of mitigation action. Additionally, we quantified changes in habitat distribution and abundance in pre- and post-mitigation landscapes. Sage-grouse avoidance of energy development at large spatial scales is well documented. We limited our research to directly within an energy development field in order to assess the influence of mitigation in close proximity to energy infrastructure. We used nest-location data (n = 488 within an energy development field to develop habitat selection models using logistic regression on data from 4 years of research prior to mitigation and for 4 years following the implementation of extensive mitigation efforts (e.g., decreased activity, buried powerlines. The post-mitigation habitat selection models indicated less avoidance of wells (well density β = 0.18 ± 0.08 than the pre-mitigation models (well density β = -0.09 ± 0.11. However, birds still avoided areas of high well density and nests were not found in areas with greater than 4 wells per km2 and the majority of nests (63% were located in areas with ≤ 1 well per km2. Several other model coefficients differed between the two time periods and indicated stronger selection for sagebrush (pre-mitigation β = 0.30 ± 0.09; post-mitigation β = 0.82 ± 0.08 and less avoidance of rugged terrain (pre-mitigation β = -0.35 ± 0.12; post-mitigation β = -0.05 ± 0.09. Mitigation efforts

Pre-inflation physics and scalar perturbations

International Nuclear Information System (INIS)

Hirai, Shiro

2005-01-01

The effect of pre-inflation physics on the power spectrum of scalar perturbations is investigated. Considering various pre-inflation models with radiation-dominated or matter-dominated periods before inflation, the power spectra of curvature perturbations for large scales are calculated, and the spectral index and running spectral index are derived. It is shown that pre-inflation models in which the length of inflation is near 60 e-folds may reproduce some key properties implied by the Wilkinson microwave anisotropy probe data

Pre-eclampsia: a life-threatening pregnancy syndrom

Directory of Open Access Journals (Sweden)

Andrea Brazdova

2014-10-01

Full Text Available Pre-eclampsia is a serious pathological state affecting 5-10% of pregnant women. Currently, it is diagnosed in the second half of pregnancy, particularly after the 20th week. Symptoms mostly correspond to the changes of blood vessels and kidneys. The severity of pre-eclampsia is proportional to symptomatic manifestations, thus the more symptoms present, the higher is of pre-eclampsia development. Although there are several studies dealing with pre-eclampsia pathology, the complete etiology is still unknown. In this review paper, several theories are presented and discussed.

7 CFR 58.919 - Pre-heat, pasteurization.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Pre-heat, pasteurization. 58.919 Section 58.919... Procedures § 58.919 Pre-heat, pasteurization. When pasteurization is intended or required by either the vat... requirements outlined in § 58.128. Pre-heat temperatures prior to ultra pasteurization will be those that have...

A semi-empirical formula on the pre-neutron-emission fragment mass distribution in nuclear fission

International Nuclear Information System (INIS)

Wang Fucheng; Hu Jimin

1988-03-01

A 5-Gauss semi-empirical formula on the pre-neutron-emission fragment mass distribution is given. The absolute standard deviation and maximum departure between calculated values and experimental data for (n,f) and (n,n'f) fission reactions from 232 Th to 245 Cm are approximately 0.4% and 0.8%, respectively. The error will get bigger if the formula is used at higher excitation energies

Catalytic isotope exchange reaction between deuterium gas and water pre-adsorbed on platinum/alumina

International Nuclear Information System (INIS)

Iida, Itsuo; Kato, Junko; Tamaru, Kenzi.

1976-01-01

The catalytic isotope exchange reaction between deuterium gas and the water pre-adsorbed on Pt/Al 2 O 3 was studied. At reaction temperatures above 273 K, the exchange rate was proportional to the deuterium pressure and independent of the amount of adsorbed water, which suggests that the rate determining step is the supply of deuterium from the gas phase. Its apparent activation energy was 38 kJ mol -1 . Below freezing point of water, the kinetic behaviour was different from that above freezing point. At higher deuterium pressures the rate dropped abruptly at 273 K. Below the temperature the apparent activation energy was 54 kJ mol -1 and the exchange rate depended not on the deuterium pressure but on the amount of the pre-adsorbed water. At lower pressures, however, the kinetic behaviour was the same as the above 273 K, till the rate of the supply of deuterium from the gas phase exceeded the supply of hydrogen from adsorbed water to platinum surface. These results suggest that below 273 K the supply of hydrogen is markedly retarded, the state of the adsorbed water differing from that above 273 K. It was also demonstrated that when the adsorbed water is in the state of capillary condensation, the exchange rate becomes very small. (auth.)

Pre-treatment of substrates for biogas production - A systems analysis; Foerbehandling av biogassubstrat i systemanalys

Energy Technology Data Exchange (ETDEWEB)

Carlsson, My; Holmstroem, David; Lagerkvist, Anders; Bisaillon, Mattias

2013-09-01

The present expansion of biogas capacity responds to a growing demand for renewable vehicle fuels. Biodegradable wastes are attractive substrates and are also prioritized in national policy. The full potential of the substrates can rarely be used however. This is partly due to impurities, or the availability or degradation speed may be limiting the biogas yield. In both cases there is a need of pre-treatments. This work deals with the system impacts of pre-treatment aiming to remove impurities in food waste and pre-treatments aiming to improve the biogas yield of horse manure and ley. In the latter case steam explosion and extrusion were the treatments studied. Gas yields and the plant and system impacts on energy, climate and economic were studied. The system includes the biogas plant as well as the impact in supplementary systems for heat and power production. The three named substrates were identified to be highly prioritised due to their total potential and the improvements possible in its realisation. Existing information from literature and contacts has form the data basis, with the addition of a few supplementary analyses of substrates. The project has been operated by the authors with participation of a group of facility operators and external reviewers. Four plants have been visited during the study. Operators of digestion plants and all interested in developing the efficiency of biogas plants are the main target group for the study. The rate that the potential yield of food waste can be utilised depends largely on how efficiently contaminants can be separated without loss of substrate. In this case the separation degree has the main impact on the economy, but not a pronounced climate effect. For all types of pre-treatments the water content of substrates is important, a higher water content is detrimental to economy, energy demand and climate impact. For both the energy balance and the climate impact the generation of vehicle fuel has a large impact. An

The Hysteretic Behavior of Partially Pre-Stressed Beam-Column Joint Sub-assemblages Made of Reactive Powder Concrete

Directory of Open Access Journals (Sweden)

Siti Aisyah Nurjannah

2016-11-01

Full Text Available Reactive powder concrete (RPC is an alternative to normal concrete (NC allowing for significantly higher strength of partially pre-stressed concrete structures. In the Indonesian national standard SNI 03-2847-2013 (2013 and the American standard ACI 318-14 (2014, the partial pre-stressed ratio (PPR is limited to a maximum of 25.0 percent to ensure that pre-stressed concrete structures remain ductile and capable to dissipate seismic energy sufficiently. The objective of this experimental study was to investigate the hysteretic performance of partially pre-stressed-RPC (PP-RPC for both interior and exterior beam-column joint sub-assemblages. Four specimens with different levels of PPR were tested with a combination of constant axial compression and cyclic lateral loads. The PPR used for the first and the second two specimens were 22.8% and 33.8%, respectively. The strength of the RPC was 101.60 MPa for all specimens. The results showed that increasing the PPR of PP-RPC improves its hysteretic performance. The best performing specimen, with a PPR of 33.8%, had a ductility that was 1.97 times that of the specimen with a PPR of 22.8%.

Cloning and characterization of pre-miR159a and pre-miR1123 from ...

African Journals Online (AJOL)

Although many miRNA genes are conserved across the plant species, the same gene family varies significantly in size and genomic organization in different species. ... Sequence identity matrix suggests 43-82% variation in precursor of Tae AL pre-miR159a (Tae Agra local pre-miR159a) across the species. On the other ...

Studi Eksperimen Pengaruh Dimensi Pipa Kapiler Pada Sistem Air Conditioning Dengan Pre-Cooling

Directory of Open Access Journals (Sweden)

Awan Satya Darmawan

2017-01-01

Full Text Available Penggunaan air conditioner semakin banyak digunakan pada kehidupan sehari-hari diiringi dengan harga jual energi yang semakin mahal. Pada studi eksperimen kali ini mencoba mengoptimalisasi dan menigkatkan efisiensi energi pada sistem air conditioner dengan cara menambahkan satu buah evaporator dan satu buah pre-cooling, dimana pre-cooling dimanfaatkan untuk memanaskan air yang nantinya akan digunakan untuk keperluan rumah tangga. Pada sistem pengkondisian udara yang telah dimodifikasi tersebut maka dilakukan studi eksperimen dengan variasi panjang pipa kapiler, diameter pipa kapiler d=0,054 in, dengan panjang kapiler 1 = 35 cm, kapiler 2 = 65 cm, kapiler 3 = 95 cm. Hasil yang didapat dari studi eksperimen kali ini adalah semakin bertambahnya panjang pipa kapiler, kapasitas pendinginan evaporator, kerja kompresor dan COP dari sistem juga akan semakin kecil dan juga mengakibatkan temperatur masuk evaporator akan semakin kecil, yang akan mengakibatkan efek pendinginan akan semakin besar. Pada variasi pipa kapiler terpendek 35 cm menghasilkan data kapasitas pendinginan total sebesar 2,25 kW, kerja kompresor 0,433 kW, temperatur masuk evaporator 7,26°C, COP sebesar 5,21 dan HRR sebesar 1,16. Sedangkan pada variasi pipa kapiler terpanjang 95 cm kapasitas pendinginan total sebesar 0,72 kW, kerja kompresor 0,332 kW, temperatur masuk evaporator 1,64°C, COP sebesar 4,35 dan HRR sebesar 1,26.

Environment-adjusted total-factor energy efficiency of Taiwan's service sectors

International Nuclear Information System (INIS)

Fang, Chin-Yi; Hu, Jin-Li; Lou, Tze-Kai

2013-01-01

This study computes the pure technical efficiency (PTE) and energy-saving target of Taiwan's service sectors during 2001–2008 by using the input-oriented data envelopment analysis (DEA) approach with the assumption of a variable returns-to-scale (VRS) situation. This paper further investigates the effects of industry characteristics on the energy-saving target by applying the four-stage DEA proposed by Fried et al. (1999). We also calculate the pre-adjusted and environment-adjusted total-factor energy efficiency (TFEE) scores in these service sectors. There are three inputs (labor, capital stock, and energy consumption) and a single output (real GDP) in the DEA model. The most energy efficient service sector is finance, insurance and real estate, which has an average TFEE of 0.994 and an environment-adjusted TFEE (EATFEE) of 0.807. The study utilizes the panel-data, random-effects Tobit regression model with the energy-saving target (EST) as the dependent variable. Those service industries with a larger GDP output have greater excess use of energy. The capital–labor ratio has a significantly positive effect while the time trend variable has a significantly negative impact on the EST, suggesting that future new capital investment should also be accompanied with energy-saving technology in the service sectors. - Highlights: • The technical efficiency and energy-saving target of service sectors are assessed. • The pre-adjusted and environment-adjusted total-factor energy efficiency scores in services are assessed. • The industrial characteristic differences are examined by the panel-data, random-effects Tobit regression model. • Labor, capital, and energy and an output (GDP) are included in the DEA model. • Future new capital investment should also be accompanied with energy-saving technology in the service sectors

Prevalence and risk factors of pre-hypertension in Congolese pre ...

African Journals Online (AJOL)

viduals with pre-hypertension are at high risk of develop- ing clinical hypertension .... blood pressure (BP) was measured on the left arm from each subject with the ... In contrast, no statistically significant differences were found between the ...

Array detector for neutron pre-emission investigations

International Nuclear Information System (INIS)

Petrascu, M.; Cruceru, I.; Bordeanu, C.

1999-01-01

It was predicted that in a fusion experiment induced by 11 Li halo nuclei on light targets, due to the very large dimension of 11 Li, one may expect that the valence neutrons will not be absorbed together with the 9 Li core, but will be emitted in the early stage of the fusion process. The experiment aiming at checking this expectation was performed at the RIKEN-RIPS facility. It was found from neutron energy spectra measurements, that an important number of fusions, more than 30%, are preceded by the pre-emission of one or two neutrons. In the position spectra measurements a very narrow neutron component has been found. This component is much narrower than that calculated by using the Cluster Shell Model Approximation (COSMA). The recent results of time- position coincidence measurements show that within the narrow component the neutrons are pre-emitted predominantly as neutron pairs. The Program Advisory Committee of RIKEN has approved a new measurement at RIKEN Ring Cyclotron aiming at investigation of neutron-neutron coincidences by using a new neutron array detector. This detector has been recently accomplished within the collaboration existing between IFIN-HH, Romania and RIKEN, Japan. The array system consists of 81 4 x 4 x 12 cm 3 BC400 plastic scintillators each coupled to XP2972 Phototubes. The mounting and the testing of the new neutron array detector will be done at RIKEN. The components of one of the 81 elements of the array detector are shown in a photo. The Monte Carlo calculated neutron detection efficiencies as a function of energy are shown. This detector will be used for the investigation of neutron-neutron coincidences in the case of Si( 11 Li, fusion) reaction. The cross- talk between adjacent and non adjacent detectors will be determined by using a 9 Li beam. As it is known in the case of Si( 9 Li, fusion) the neutrons are of evaporation origin, and since these neutrons are emitted in 4 π the chance for detecting 2 coincident neutrons in the

Pre-operative evaluation for thorax surgery

International Nuclear Information System (INIS)

Silva Luis, Saenz; Morales, Oscar Alberto

2002-01-01

A pre-operative analysis of the function of the breathing system is made in the patient that will be taken to thorax surgery. The paper includes risk factors, pre-operative clinical evaluation and of breathing and cardiovascular system

The structural behaviour of a pre-stressed column-beam connection as an alternative to the traditional timber joint system

NARCIS (Netherlands)

Shiratori, T.; Leijten, A.J.M.; Komatsu, K.

2009-01-01

We present a new and alternative proposition for the traditional Asian timber column-and-beam connection, using the Kusabi-Nageshi (K-N) joint system. The mechanical behaviour is complex and relies on the embedment strength of the timber, pre-stress, friction, and elastic energy storage. Using a

Evaluation of energy efficiency of various biogas production and utilization pathways

International Nuclear Information System (INIS)

Poeschl, Martina; Ward, Shane; Owende, Philip

2010-01-01

The energy efficiency of different biogas systems, including single and co-digestion of multiple feedstock, different biogas utilization pathways, and waste-stream management strategies was evaluated. The input data were derived from assessment of existing biogas systems, present knowledge on anaerobic digestion process management and technologies for biogas system operating conditions in Germany. The energy balance was evaluated as Primary Energy Input to Output (PEIO) ratio, to assess the process energy efficiency, hence, the potential sustainability. Results indicate that the PEIO correspond to 10.5-64.0% and 34.1-55.0% for single feedstock digestion and feedstock co-digestion, respectively. Energy balance was assessed to be negative for feedstock transportation distances in excess of 22 km and 425 km for cattle manure and for Municipal Solid Waste, respectively, which defines the operational limits for respective feedstock transportation. Energy input was highly influenced by the characteristics of feedstock used. For example, agricultural waste, in most part, did not require pre-treatment. Energy crop feedstock required the respect cultivation energy inputs, and processing of industrial waste streams included energy-demanding pre-treatment processes to meet stipulated hygiene standards. Energy balance depended on biogas yield, the utilization efficiency, and energy value of intended fossil fuel substitution. For example, obtained results suggests that, whereas the upgrading of biogas to biomethane for injection into natural gas network potentially increased the primary energy input for biogas utilization by up to 100%; the energy efficiency of the biogas system improved by up to 65% when natural gas was substituted instead of electricity. It was also found that, system energy efficiency could be further enhanced by 5.1-6.1% through recovery of residual biogas from enclosed digestate storage units. Overall, this study provides bases for more detailed assessment

Brazil in the global energy world

Energy Technology Data Exchange (ETDEWEB)

Kim, Frank D.; Vossoughi, Shapour [University of Kansas (KU), KS (United States)

2012-07-01

Brazil is the 10th largest energy consumer in the world and the third largest in the Western Hemisphere, behind the United States and Canada. Total primary energy consumption in Brazil has increased significantly in recent years; and over the past decade, Brazil has made great strides in increasing its total energy production, particularly oil. Brazil has the second-largest crude oil reserves in South America (behind Venezuela), and is one of the fastest growing oil producers in the world. According to United States Energy Information Administration (EIA), Brazil had 12.2 billion barrels of proven oil reserves in 2008. In 2007, Brazil's state owned Petroleo Brasileiro S.A. (PETROBRAS) announced that it had discovered an estimated 5-8 billion barrels of recoverable reserves (including both oil and natural gas) in the Tupi field, located in the Santos Basin. In 2008, subsequent discoveries were announced, to include Jupiter and Carioca (aka Sugar Loaf). Although PETROBRAS has yet to confirm the size of the discoveries, some industry analysts estimate the total extent of recoverable oil and natural gas reserves in the entire pre-salt layer have approached 40 to 80 billion barrels of oil equivalent. The reserves occur below a salt zone that is estimated to be 7,000 meters below the ocean surface. However, Brazil faces many challenges to recover the hydrocarbons to include technical, political, fiscal, and infrastructure hurdles. In spite of the challenges ahead, these discoveries transformed the nature and focus of Brazil's oil industry, economy, and future; and the potential impact of the pre-salt discoveries upon world oil markets is vast. The purpose of this paper is to discuss how the recent discoveries will affect Brazil's future and the impact it will have on the global energy world. (author)

Delayed hydride cracking: alternative pre-cracking method

International Nuclear Information System (INIS)

Mieza, Juan I.; Ponzoni, Lucio M.E.; Vigna, Gustavo L.; Domizzi, Gladys

2009-01-01

The internal components of nuclear reactors built-in Zr alloys are prone to a failure mechanism known as Delayed Hydride Cracking (DHC). This situation has triggered numerous scientific studies in order to measure the crack propagation velocity and the threshold stress intensity factor associated to DHC. Tests are carried out on fatigued pre-crack samples to ensure similar test conditions and comparable results. Due to difficulties in implementing the fatigue pre-crack method it would be desirable to replace it with a pre-crack produced by the same process of DHC, for which is necessary to demonstrate equivalence of this two methods. In this work tests on samples extracted from two Zr-2.5 Nb tubes were conducted. Some of the samples were heat treated to obtain a range in their metallurgical properties as well as different DHC velocities. A comparison between velocities measured in test samples pre-cracked by fatigue and RDIH is done, demonstrating that the pre-cracking method does not affect the measured velocity value. In addition, the incubation (t inc ), which is the time between the application of the load and the first signal of crack propagation, in samples pre-cracked by RDIH, was measured. It was found that these times are sufficiently short, even in the worst cases (lower speed) and similar to the ones of fatigued pre-cracked samples. (author)

Nuclear Energy's Role in Mitigating Climate Change and Air Pollution

International Nuclear Information System (INIS)

2013-01-01

Energy experts expect energy demand to rise dramatically in the 21st century, especially in developing countries, where today, over one billion people have no access to modern energy services. Meeting global energy demand will require a 75% expansion in primary energy supply by 2050. If no steps are taken to reduce emissions, the energy-related CO 2 emissions would nearly double in the same period. The increased levels of this greenhouse gas in the atmosphere could raise average global temperatures 3 o C or more above pre-industrial levels, which may trigger the dangerous anthropogenic interference with the climate system, which the United Nations Framework Convention on Climate Change seeks to prevent.

Behavior of pre-irradiated fuel under a simulated RIA condition. Results of NSRR Test JM-5

International Nuclear Information System (INIS)

Fuketa, Toyoshi; Sasajima, Hideo; Mori, Yukihide; Tanzawa, Sadamitsu; Ishijima, Kiyomi; Kobayashi, Shinsho; Kamata, Hiroshi; Homma, Kozo; Sakai, Haruyuki.

1995-11-01

This report presents results from the power burst experiment with pre-irradiated fuel rod, Test JM-5, conducted in the Nuclear Safety Research Reactor (NSRR). The data concerning test method, pre-irradiation, pre-pulse fuel examination, pulse irradiation, transient records and post-pulse fuel examination are described, and interpretations and discussions of the results are presented. Preceding to the pulse irradiation in the NSRR, test fuel rod was irradiated in the Japan Materials Testing Reactor (JMTR) up to a fuel burnup of 25.7 MWd/kgU with average linear heat rate of 33.4 kW/m. The fuel rod was subjected to the pulse irradiation resulting in a desposited energy of 223 ± 7 cal/g·fuel (0.93 ± 0.03 kJ/g·fuel) and a peak fuel enthalpy of 167 ± 5 cal/g·fuel (0.70 ± 0.02 kJ/g·fuel) under stagnant water cooling condition at atmospheric pressure and ambient temperature. Test fuel rod behavior was assessed from pre- and post-pulse fuel examinations and transient records during the pulse. The Test JM-5 resulted in cladding failure. More than twenty small cracks were found in the post-test cladding, and most of the defects located in pre-existing locally hydrided region. The result indicates an occurrence of fuel failure by PCMI (pellet/cladding mechanical interaction) in combination with decreased integrity of hydrided cladding. (author)

Project of setting to contribution of renewable energies for an pre-electrification to support rural development

International Nuclear Information System (INIS)

1999-01-01

The document is a project of the Government of Burkina Faso. The project aim is to increase the energy utilization renewable by the populations living in the rural areas. It aims moreover the improvement of the standard living in the rural areas, the access of rural population to basic elements to fight against poverty and rural depopulation. It is a question of popularizing in rural area, the use of the renewable energy equipment consumers, in particular the photovoltaic one. This equipment will make it possible to satisfy the requirements in lighting with the Community systems, in leisure by providing a minimum of equipment in the community centres of leisure, in drugs conservation installation in the health centres and in using energy to pump drinking water. The use of this energy source will make it possible to mitigate the non access of the rural areas to the energy produced by the National Company of Electricity of Burkina [fr

The Contribution of Environmental Siting and Permitting Requirements to the Cost of Energy for Wave Energy Devices

Energy Technology Data Exchange (ETDEWEB)

Copping, Andrea E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Geerlofs, Simon H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hanna, Luke A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2014-06-01

Responsible deployment of marine and hydrokinetic (MHK) devices in estuaries, coastal areas, and major rivers requires that biological resources and ecosystems be protected through siting and permitting (consenting) processes. Scoping appropriate deployment locations, collecting pre-installation (baseline) and post-installation data all add to the cost of developing MHK projects, and hence to the cost of energy. Under the direction of the U.S. Department of Energy, Pacific Northwest National Laboratory scientists have developed logic models that describe studies and processes for environmental siting and permitting. Each study and environmental permitting process has been assigned a cost derived from existing and proposed tidal, wave, and riverine MHK projects. Costs have been developed at the pilot scale and for commercial arrays for a surge wave energy converter

Ionization Energy: Implications of Preservice Teachers' Conceptions

Science.gov (United States)

Tan, Kim Chwee Daniel; Taber, Keith S.

2009-01-01

The results from a study to explore pre-service teachers' understanding of ionization energy, a topic that features in A-level (grade 11 and 12) chemistry courses. in Singapore , is described. A previous study using a two-tier multiple choice diagnostic test has shown that Singapore A-level students have considerable difficulty understanding the…

Hunger can be taught: Hunger Recognition regulates eating and improves energy balance

Directory of Open Access Journals (Sweden)

Ciampolini M

2013-06-01

Full Text Available Mario Ciampolini,1 David Lovell-Smith,2 Timothy Kenealy,3 Riccardo Bianchi4 1Unit of Preventive Gastroenterology, Department of Pediatrics, Università di Firenze, Florence, Italy; 2Department of General Practice, University of Otago, Christchurch, New Zealand; 3Department of General Practice and Primary Health Care, University of Auckland, Auckland, New Zealand; 4Department of Physiology and Pharmacology, State University of New York Downstate Medical Center, Brooklyn, NY, USA Abstract: A set of spontaneous hunger sensations, Initial Hunger (IH, has been associated with low blood glucose concentration (BG. These sensations may arise pre-meal or can be elicited by delaying a meal. With self-measurement of BG, subjects can be trained to formally identify and remember these sensations (Hunger Recognition. Subjects can then be trained to ensure that IH is present pre-meal for most meals and that their pre-meal BG is therefore low consistently (IH Meal Pattern. IH includes the epigastric Empty Hollow Sensation (the most frequent and recognizable as well as less specific sensations such as fatigue or light-headedness which is termed inanition. This report reviews the method for identifying IH and the effect of the IH Meal Pattern on energy balance. In adults, the IH Meal Pattern has been shown to significantly decrease energy intake by one-third, decrease preprandial BG, reduce glycosylated hemoglobin, and reduce insulin resistance and weight in those who are insulin resistant or overweight. Young children as well as adults can be trained in Hunger Recognition, giving them an elegant method for achieving energy balance without the stress of restraint-type dieting. The implications of improving insulin sensitivity through improved energy balance are as wide as improving immune activity. Keywords: energy intake, hunger, energy balance, food intake regulation, prevention, insulin resistance, obesity, diabetes, inflammation, risks

Impacts of wave energy conversion devices on local wave climate: observations and modelling from the Perth Wave Energy Project

Science.gov (United States)

Hoeke, Ron; Hemer, Mark; Contardo, Stephanie; Symonds, Graham; Mcinnes, Kathy

2016-04-01

As demonstrated by the Australian Wave Energy Atlas (AWavEA), the southern and western margins of the country possess considerable wave energy resources. The Australia Government has made notable investments in pre-commercial wave energy developments in these areas, however little is known about how this technology may impact local wave climate and subsequently affect neighbouring coastal environments, e.g. altering sediment transport, causing shoreline erosion or accretion. In this study, a network of in-situ wave measurement devices have been deployed surrounding the 3 wave energy converters of the Carnegie Wave Energy Limited's Perth Wave Energy Project. This data is being used to develop, calibrate and validate numerical simulations of the project site. Early stage results will be presented and potential simulation strategies for scaling-up the findings to larger arrays of wave energy converters will be discussed. The intended project outcomes are to establish zones of impact defined in terms of changes in local wave energy spectra and to initiate best practice guidelines for the establishment of wave energy conversion sites.

A Conceptual Change Model for Teaching Heat Energy, Heat Transfer and Insulation

Science.gov (United States)

Lee, C. K.

2014-01-01

This study examines the existing knowledge that pre-service elementary teachers (PSETs) have regarding heat energy, heat transfer and insulation. The PSETs' knowledge of heat energy was initially assessed by using an activity: determining which container would be best to keep hot water warm for the longest period of time. Results showed that PSETs…

Sustainable chains and energy conservation. Final report of the preliminary phase

International Nuclear Information System (INIS)

Bakker, C.; Bonekamp, L.

2002-01-01

An overview is given of the preparatory phase of the project on the title subject. Eleven pre-pilot projects (feasibility studies) are described of which 6 are elaborated in detail: energy conservation in the pig meat chain; Novel Protein Foods; dairy industry, in particular so-called cheese cows; dry matter content of potatoes for french fries; tare reduction of potatoes in the chain of pre-baked fries; and the export of tomatoes by maritime transport [nl

National strategic planing for the utilization and development of nuclear energy

International Nuclear Information System (INIS)

Won, B. C.; Lee, Y. J.; Lee, T. H.; Oh, K. B.; Kim, S. H.; Lee, J. W.

2011-12-01

It is followed that results and contents of National strategic planning for the utilization and development of nuclear energy. Our team makes an effort to carry out pre-research on establishment of the fourth Comprehensive Nuclear Energy Promotion Plan(CNEPP). To establish CNEPP, we analyzed domestic and global environment and trends of nuclear energy including the result of patent analysis, and find ways to link and coordinate other national plans concerned with nuclear energy. Upon the analysis we produce the final draft absorbing comments from the above-mentioned public discussions

Energy service unbundling: where deregulation is heading

International Nuclear Information System (INIS)

Croft, M.

2002-01-01

The workings of the natural gas market is provided by the speaker at the beginning of the presentation, and covers pre-regulation, early regulation and deregulation. The pre-regulation era provided no customer choice, and the early regulation period saw industrial customers with some degree of choice (mid-1980s). The advent of deregulation created core market customer choice (around 1996). At Coral Energy, there is choice of energy supplier, choice of price structure, and choice of transportation and distribution. A forecast of North American gas demand is provided, along with the natural gas supply and the North American gas supply basins. For the period January 1996 to May 2000, a comparison of annualized volatility is discussed. The author discusses the strategies for purchasing gas: 1) to know yourself and your risk tolerance, flexibility, and load profile; 2) switching gas supply provider. It is important to choose a three year term, combination pricing, and storage position. The risk management options are reviewed: limit exposure to price volatility, mitigate price/volume volatility, and enhance bottom line by capturing market opportunities. figs

The role of nuclear power and other options in competitive electricity market study using message model

International Nuclear Information System (INIS)

Scorpio Sri Herdinie and Edi Sartono

2003-01-01

The electricity demand in Indonesia is very high due to the National Economic Development based on industrialization and supported by a strong agriculture base. It can be noted that in the last five years, the annual electricity growth rate has been reaching around 15% per annum. Though during the economic crisis the electricity demand have time to reduction. Start early 2000s the economic growth in Indonesia will gradually increase. As a consequence, the electricity growth rate also increase in the next coming decades. MESSAGE (Model for Energy Supply Strategy Alternatives and their General Environmental Impacts) is a model designed for the optimization of energy system(i.e. energy supplies and utilization). The goal of this study is to support the national planning and decision making process in the energy and electricity sector in Indonesia with regard to the economic, health, environmental and safety aspects. The objective of this study is to analyse the role of Nuclear Power Plant in the whole energy systems by introducing the new electricity regulation and structure in the market. Seen that Nuclear Power Plant will be enter the Java Bali system in the period between 2015-2020. and will dominate the addition of capacities by the end period of study (year 2020-2025). Nuclear energy has very important long term roles in the energy scenario and it is possible to do the market competitive when the Multi buyer Multi Seller (MBMS) will be done in the system electricity in Indonesia(the government has changed the target of MBMS realization into 2007). (author)

LHC beam energy in 2012

International Nuclear Information System (INIS)

Siemko, A.; Charifouline, Z.; Dahlerup-Petersen, K.; Denz, R.; Ravaioli, E.; Schmidt, R.; Verweij, A.

2012-01-01

The interconnections between the LHC main magnets are made of soldered joints (splices) of two superconducting cables stabilized by a copper bus bar. The measurements performed in 2009 in the whole machine, in particular in sector 3-4 during the repair after the 2008 accident, demonstrated that there is a significant fraction of defective copper bus bar joints in the machine. In this paper, the limiting factors for operating the LHC at higher energies with defective 13 kA bus bar joints are briefly reviewed. The experience gained during the 2011 run, including the quench statistics and dedicated quench propagation tests impacting on maximum safe energy are presented. The impact of the by-pass diode contact resistance issue is also addressed. Finally, a proposal for running at the highest possible safe energy compatible with the pre-defined risk level is presented. (authors)

LHC Beam Energy in 2012

CERN Document Server

Siemko, A; Dahlerup-Petersen, K; Denz, R; Ravaioli, E; Schmidt, R; Verweij, A

2012-01-01

The interconnections between the LHC main magnets are made of soldered joints (splices) of two superconducting cables stabilized by a copper bus bar. The measurements performed in 2009 in the whole machine, in particular in sector 3-4 during the repair after the 2008 accident, demonstrated that there is a significant fraction of defective copper bus bar joints in the machine. In this paper, the limiting factors for operating the LHC at higher energies with defective 13 kA bus bar joints are briefly reviewed. The experience gained during the 2011 run, including the quench statistics and dedicated quench propagation tests impacting on maximum safe energy are presented. The impact of the by-pass diode contact resistance issue is also addressed. Finally, a proposal for running at the highest possible safe energy compatible with the pre-defined risk level is presented.

Effect of pre-treatments on methane production potential of energy crops and crop residues

Energy Technology Data Exchange (ETDEWEB)

Lehtomaki, A.; Ronkainen; Rintala, J.A. [Jyvaskla Univ. (Finland). Dept. of Biological and Environmental Sciences; Viinikainen, T.A. [Jyvaskla Univ. (Finland). Dept. of Chemistry

2004-07-01

Energy crops, that is, crops grown specifically for energy purposes are an alternative to food production in areas with sufficient agricultural land. Crop residues are also a potential source of energy. The anaerobic digestion of solid materials is limited by hydrolysis of complex polymeric substances such as lignocellulose. The methane producing potential of ligno cellulosic material is to pretreat the substrate in order to break up the polymer chains to more easily accessible soluble compounds. In this study, three different substrates were used: sugar beet tops, grass hay, and straw of oats. Biological pretreatments were the following: enzyme treatment, composting, white-rot fungi treatment. Also, pretreatment in water was tried. Chemical pretreatments included peracetic acid treatment, and treatment with two different alkalis. Alkaline pretreatments of hay and sugar beet tops have the potential to improve the methane yield. For instance, the yield of grass hay was increased 15 per cent by one particular alkaline treatment. Straw did not respond to any of the treatments tried. 18 refs., 1 tab., 2 figs.

Pre-exposure rabies prophylaxis: a systematic review

Science.gov (United States)

Recuenco, Sergio; Navarro-Vela, Ana Maria; Deray, Raffy; Vigilato, Marco; Ertl, Hildegund; Durrheim, David; Rees, Helen; Nel, Louis H; Abela-Ridder, Bernadette; Briggs, Deborah

2017-01-01

Abstract Objective To review the safety and immunogenicity of pre-exposure rabies prophylaxis (including accelerated schedules, co-administration with other vaccines and booster doses), its cost–effectiveness and recommendations for use, particularly in high-risk settings. Methods We searched the PubMed, Centre for Agriculture and Biosciences International, Cochrane Library and Web of Science databases for papers on pre-exposure rabies prophylaxis published between 2007 and 29 January 2016. We reviewed field data from pre-exposure prophylaxis campaigns in Peru and the Philippines. Findings Pre-exposure rabies prophylaxis was safe and immunogenic in children and adults, also when co-administered with routine childhood vaccinations and the Japanese encephalitis vaccine. The evidence available indicates that shorter regimens and regimens involving fewer doses are safe and immunogenic and that booster intervals could be extended up to 10 years. The few studies on cost suggest that, at current vaccine and delivery costs, pre-exposure prophylaxis campaigns would not be cost-effective in most situations. Although pre-exposure prophylaxis has been advocated for high-risk populations, only Peru and the Philippines have implemented appropriate national programmes. In the future, accelerated regimens and novel vaccines could simplify delivery and increase affordability. Conclusion Pre-exposure rabies prophylaxis is safe and immunogenic and should be considered: (i) where access to postexposure prophylaxis is limited or delayed; (ii) where the risk of exposure is high and may go unrecognized; and (iii) where controlling rabies in the animal reservoir is difficult. Pre-exposure prophylaxis should not distract from canine vaccination efforts, provision of postexposure prophylaxis or education to increase rabies awareness in local communities. PMID:28250534

Pre-migration trauma and HIV-risk behavior.

Science.gov (United States)

Steel, Jennifer; Herlitz, Claes; Matthews, Jesse; Snyder, Wendy; Mazzaferro, Kathryn; Baum, Andy; Theorell, Töres

2003-03-01

This study examined the relationship between pre-migration trauma and HIV-risk behavior in refugees from sub-Saharan Africa. The sample comprised 122 persons who had emigrated from sub-Saharan Africa and were currently residing in Sweden. Qualitative methods including individual interviews, focus groups, and interviews with key informants addressed questions regarding trauma experience and HIV-risk behavior. A history of pre-migration trauma was found to be associated with HIV-risk behavior. According to the participants, symptoms associated with post-traumatic stress disorder, depression, adjustment disorder, and substance use mediated the relationship between pre-migration trauma and sexual risk behavior. In contrast, a minority of the participants who reported pre-migration trauma but not psychological sequelae, or experienced post-traumatic growth, reported safer sexual practices. It appears that for some individuals, pre-migration trauma resulted in psychiatric sequelae, which may increase an individual's risk to be infected with HIV. Interventions targeted at individuals at increased risk (i.e. pre-migration trauma with unresolved psychiatric symptomatology) may facilitate the prevention of HIV and other sexually transmitted diseases in this population. Integration of multiple psychosocial and health issues is recommended for comprehensive treatment and prevention programs.

Developing Pre-service Teachers' Technology Integration ...

African Journals Online (AJOL)

Developing Pre-service Teachers' Technology Integration Competencies in Science and Mathematics Teaching: Experiences from Tanzania and Uganda. ... This study investigated the ICT integration practices in pre-service teacher education in the School of Education at Makerere University (College of Education and ...

Practical Secure Computation with Pre-Processing

DEFF Research Database (Denmark)

Zakarias, Rasmus Winther

Secure Multiparty Computation has been divided between protocols best suited for binary circuits and protocols best suited for arithmetic circuits. With their MiniMac protocol in [DZ13], Damgård and Zakarias take an important step towards bridging these worlds with an arithmetic protocol tuned...... space for pre-processing material than computing the non-linear parts online (depends on the quality of circuit of course). Surprisingly, even for our optimized AES-circuit this is not the case. We further improve the design of the pre-processing material and end up with only 10 megabyes of pre...... a protocol for small field arithmetic to do fast large integer multipli- cations. This is achieved by devising pre-processing material that allows the Toom-Cook multiplication algorithm to run between the parties with linear communication complexity. With this result computation on the CPU by the parties...

Streamlined energy-savings calculations for heat-island reduction strategies

Energy Technology Data Exchange (ETDEWEB)

Akbari, Hashem; Konopacki, Steven J.

2003-03-15

We have developed summary tables (sorted by heating- and cooling-degree-days) to estimate the potential of Heat-Island Reduction (HIR) strategies (i.e., solar-reflective roofs, shade trees, reflective pavements, and urban vegetation) to reduce cooling-energy use in buildings. The tables provide estimates of savings for both direct effect (reducing heat gain through the building shell) and indirect effect (reducing the ambient air temperature). In this analysis, we considered three building types that offer the most savings potential : residences, offices, and retail stores. Each building type was characterized in detail by Pre-1980 (old) or 1980+ (new) construction vintage and with natural gas or electricity as heating fuel. We defined prototypical-building characteristics for each building type and simulated the effects of HIR strategies on building cooling and heating energy use and peak power demand using the DOE-2.1E model and weather data for about 240 locations in the U.S. A statistical analysis of previously completed simulations for five cities was used to estimate the indirect savings. Our simulations included the effect of (1) solar-reflective roofing material on building [direct effect], (2) placement of deciduous shade trees near south and west walls of building [direct effect], and (3) ambient cooling achieved by urban reforestation and reflective building surfaces and pavements [indirect effect]. Upon completion of estimating the direct and indirect energy savings for all the selected locations, we integrated the results in tables arranged by heating- and cooling-degree-days. We considered 15 bins for heating-degree-days, and 11 bins for cooling-degree-days. Energy use and savings are presented per 1000 ft2 of roof area. In residences heated with gas and in climates with greater than 1000 cooling-degree-days, the annual electricity savings in Pre-1980 stock ranged from 650 to 1300 kWh/1000ft2; for 1980+ stock savings ranged 300 to 600 kWh/1000 ft2

Periodontal disease and pre-eclampsia: a systematic review.

Science.gov (United States)

Kunnen, Alina; van Doormaal, Jasper J; Abbas, Frank; Aarnoudse, Jan G; van Pampus, Maria G; Faas, Marijke M

2010-12-01

This review evaluates the possible relationship between periodontal disease and pre-eclampsia, a major pregnancy complication. A generalized inflammatory response plays an important role in the pathogenesis of pre-eclampsia. Because periodontal disease is a low-grade inflammatory state, periodontal disease might contribute to the pathogenesis of pre-eclampsia. A literature search of PubMed, EMBASE and CINAHL until August 2010 revealed 12 eligible observational studies and three randomized-controlled trials (RCTs). It appeared difficult to compare these studies, due to variations in definitions of periodontal disease and pre-eclampsia, timing of periodontal examination and inadequate control for confounding factors. Eight observational studies reported a positive association, while four studies found no association. None of the RTCs reported reductions in pre-eclamptic rate after periodontal therapy during pregnancy. Therefore, it is questionable whether periodontal disease plays a causal role in the pathogenesis of pre-eclampsia. The observed association in eight observational studies might be the result of induction of periodontal disease due to the pre-eclamptic state or it may be an epiphenomenon of an exaggerated inflammatory response to pregnancy. Larger RCTs with pre-eclampsia as the primary outcome and pathophysiological studies are required to explore causality and to dissect biological mechanisms involved. © 2010 John Wiley & Sons A/S.

Biological degradation and greenhouse gas emissions during pre-storage of liquid animal manure

DEFF Research Database (Denmark)

Møller, Henrik Bjarne; Sommer, S.G.; Ahring, Birgitte Kiær

2004-01-01

digestion may be a significant source of CH4 and could reduce the potential CH4 production in the biogas reactor. Degradation of energy-rich organic components in slurry and emissions of CH4 and carbon dioxide (CO2) from aerobic and anaerobic degradation processes during pre-storage were examined...... in the laboratory. Newly mixed slurry was added to vessels and stored at 15 and 20degreesC for 100 to 220 d. During storage, CH4 and CO2 emissions were measured with a dynamic chamber technique. The ratio of decomposition in the subsurface to that at the surface indicated that the aerobic surface processes...... contributed significantly to CO2 emission. The measured CH4 emission was used to calculate the methane conversion factor (MCF) in relation to storage time and temperature, and the total carbon-C emission was used to calculate the decrease in potential CH4 production by anaerobic digestion following pre...

Fossil energy consumption and greenhouse gas emissions, including soil carbon effects, of producing agriculture and forestry feedstocks

Science.gov (United States)

Christina E. Canter; Zhangcai Qin; Hao Cai; Jennifer B. Dunn; Michael Wang; D. Andrew Scott

2017-01-01

The GHG emissions and fossil energy consumption associated with producing potential biomass sup­ply in the select BT16 scenarios include emissions and energy consumption from biomass production, harvest/collection, transport, and pre-processing activities to the reactor throat. Emissions associated with energy, fertilizers, and...

Pre-frailty and frailty of elderly residents in a municipality with a low Human Development Index

Directory of Open Access Journals (Sweden)

Wanderley Matos Reis Júnior

2014-08-01

Full Text Available OBJECTIVE: to identify the prevalence of the factors associated with pre-frailty and frailty of elderly residents in a municipality with a low Human Development IndexMETHOD: Cross-sectional study with a populational and household framework conducted with 316 elderly people. Frailty was determined from the presence of three or more of the following factors: (i self-reported unintentional weight loss; (ii lack of strength and energy; (iii weakness; (iv slowness; (v low level of physical activity. The association between frailty and socio-demographic, behavioral and health factors was measured using the multinomial logistic regression technique.RESULTS: The prevalence of pre-frailty and frailty was 58.7% and 23.8%, respectively. The adjusted regression model showed that the state of pre-frailty was associated with gender, age group and BMI, and frailty was associated with gender, age group, hospitalization, functional capacity, and self-perceived health.CONCLUSION: The evidence presented in this study demonstrates more variables associated with the frailty condition, reinforcing the concept of a multifactorial clinical syndrome that may result in the loss of functionality.

Public participation in energy saving retrofitting of residential buildings in China

International Nuclear Information System (INIS)

Liu, Wenling; Zhang, Jinyun; Bluemling, Bettina; Mol, Arthur P.J.; Wang, Can

2015-01-01

Highlights: • We compare public participation in three early cases of residential retrofitting in Beijing. • Residents’ involvement in pre-retrofit activities as well as in the choice and use of technologies varied. • More involvement of residents during retrofitting improves energy saving performance. • Taking into account motives and energy use practices of residents improves energy saving through retrofitting. - Abstract: Retrofitting existing residential buildings has been claimed as one crucial way to reduce energy consumption and greenhouse gas emissions within the Chinese residential sector. In China’s government-dominated retrofitting projects, the participation of residents is often neglected. The objective of this paper is to assess the influence level of public participation (before, during and after retrofit) on energy saving by comparing three Beijing neighborhoods with different retrofitting models: a central government-led model, a local government-led model, and an old neighborhood retrofit model. In the three cases data were collected through interviews with neighborhood workers and residents. The results show that residents’ involvement in pre-retrofit activities, in technology selection and in the use of technology differs greatly among the three cases. This study concludes that in order to improve the effectiveness of energy saving interventions, the motives, intentions and living habits of residents need to be given more consideration when designing and implementing retrofitting. By highlighting the importance of public participation this paper contributes to energy saving policy development in China

Combined Screening for Early Detection of Pre-Eclampsia

Directory of Open Access Journals (Sweden)

Hee Jin Park

2015-08-01

Full Text Available Although the precise pathophysiology of pre-eclampsia remains unknown, this condition continues to be a major cause of maternal and fetal mortality. Early prediction of pre-eclampsia would allow for timely initiation of preventive therapy. A combination of biophysical and biochemical markers are superior to other tests for early prediction of the development of pre-eclampsia. Apart from the use of parameters in first-trimester aneuploidy screening, cell-free fetal DNA quantification is emerging as a promising marker for prediction of pre-eclampsia. This article reviews the current research of the most important strategies for prediction of pre-eclampsia, including the use of maternal risk factors, mean maternal arterial pressure, ultrasound parameters, and biomarkers.

Use of basic and specific pre-treatments for the biogas production. Revision and analysis

International Nuclear Information System (INIS)

Martínez Hernández, Carlos M.; García López, Yaser

2016-01-01

Keeping in mind the importance that has today the use of national and international biogas plants, which use as raw material animal manure; as well as agricultural and agroindustrial residuals for the energy production and biofertilizers, minimizing the aspects of environmental contamination. This work is presented in three parts, in those which: firstly the technologies and the methods are described to apply the basic and special pre-treatments to the different biomass in order to obtain their maximum potential of methane. A second part where it is approached the particularities to do that. Finally, a third part where their possible use is analyzed in the Cuban case. As a result of the same one, the state of the art is shown in the use of basic and special pre-treatments, with the objective of to potentialize the increase of the methane production in agricultural or animal biomasses. (author)

Energy control in industry ''case of SAP Olympic''. ''Pre- energy diagnosis of SAP Olympic: optimization of consumption of electricity and compressed air''

International Nuclear Information System (INIS)

Zemba, Ouamsibiri Ernest

2007-01-01

This document is a report of a training course to graduate university degree in electronic engineering. It tackles the important question of the competitiveness of Burkina Faso societies in the UEMOA zone. The cost of energy is very high for these societies. This situation affects the distribution of their products. In this case the societies have to optimize their energy consumption. A company as SAP Olympic is supplied energy by a primary tension of 15 KV and a contractual demand of 750 kWh. This society works on 24 hours a day, from Monday to Saturday. Its energy consumption raised and was accentuated by the lack of measuring devices, controls, adjustments and monitoring. That is also caused the one's age of the equipment and installations: all that involves over consumptions and thus penalties of going beyond the contractual demand. It would thus be necessary to have an electric diagram, to have numerical analyzers of electricity consumption and to subscribe has a higher power in order to carry out savings of time of maintenance, availability of production, equipment and staff safety and in order to avoid the penalties of going beyond [fr

Thermal desorption of deuterium from polycrystalline nickel pre-implanted with helium

International Nuclear Information System (INIS)

Shi, S.Q.; Abramov, E.; Thompson, D.A.

1990-01-01

The thermal desorption technique has been used to study the trapping of deuterium atoms in high-purity polycrystalline nickel pre-implanted with helium for 1 x 10 19 to 5 x 10 20 ions/m 2 . The effect of post-implantation annealing at 703 K and 923 K on the desorption behavior was investigated. Measured values of the total amount of detrapped deuterium (Q T ) and helium concentration were used in a computer simulation of the desorption curve. It was found that the simulation using one or two discrete trap energies resulted in an inadequate fit between the simulated and the measured data. Both experimental and simulation results are explained using a stress-field trapping model. The effective binding energy, E b eff , was estimated to be in the range of 0.4-0.6 eV. Deuterium charging was found to stimulate a release of helium at a relatively low temperature

Effect of pre-tension on the peeling behavior of a bio-inspired nano-film and a hierarchical adhesive structure

Science.gov (United States)

Peng, Zhilong; Chen, Shaohua

2012-10-01

Inspired by the reversible adhesion behaviors of geckos, the effects of pre-tension in a bio-inspired nano-film and a hierarchical structure on adhesion are studied theoretically. In the case with a uniformly distributing pre-tension in a spatula-like nano-film under peeling, a closed-form solution to a critical peeling angle is derived, below or above which the peel-off force is enhanced or reduced, respectively, compared with the case without pre-tension. The effects of a non-uniformly distributing pre-tension on adhesion are further investigated for both a spatula-like nano-film and a hierarchical structure-like gecko's seta. Compared with the case without pre-tension, the pre-tension, no matter uniform or non-uniform, can increase the adhesion force not only for the spatula-like nano-film but also for the hierarchical structure at a small peeling angle, while decrease it at a relatively large peeling angle. Furthermore, if the pre-tension is large enough, the effective adhesion energy of a hierarchical structure tends to vanish at a critical peeling angle, which results in spontaneous detachment of the hierarchical structure from the substrate. The present theoretical predictions can not only give some explanations on the existing experimental observation that gecko's seta always detaches at a specific angle and no apparent adhesion force can be detected above the critical angle but also provide a deep understanding for the reversible adhesion mechanism of geckos and be helpful to the design of biomimetic reversible adhesives.

76 FR 40905 - Turnagain Arm Tidal Electric Energy Project; Notice of Intent To File License Application, Filing...

Science.gov (United States)

2011-07-12

... Tidal Electric Energy Project; Notice of Intent To File License Application, Filing of Pre-Application....: 13509-001. c. Dated Filed: May 11, 2011. d. Submitted By: Turnagain Arm Tidal Energy Corporation. e. Name of Project: Turnagain Arm Tidal Electric Energy Project. f. Location: Of the Upper Cook Inlet off...

Accelerating the energy retrofit of commercial buildings using a database of energy efficiency performance

International Nuclear Information System (INIS)

Lee, Sang Hoon; Hong, Tianzhen; Piette, Mary Ann; Sawaya, Geof; Chen, Yixing; Taylor-Lange, Sarah C.

2015-01-01

Small and medium-sized commercial buildings can be retrofitted to significantly reduce their energy use, however it is a huge challenge as owners usually lack of the expertise and resources to conduct detailed on-site energy audit to identify and evaluate cost-effective energy technologies. This study presents a DEEP (database of energy efficiency performance) that provides a direct resource for quick retrofit analysis of commercial buildings. DEEP, compiled from the results of about ten million EnergyPlus simulations, enables an easy screening of ECMs (energy conservation measures) and retrofit analysis. The simulations utilize prototype models representative of small and mid-size offices and retails in California climates. In the formulation of DEEP, large scale EnergyPlus simulations were conducted on high performance computing clusters to evaluate hundreds of individual and packaged ECMs covering envelope, lighting, heating, ventilation, air-conditioning, plug-loads, and service hot water. The architecture and simulation environment to create DEEP is flexible and can expand to cover additional building types, additional climates, and new ECMs. In this study DEEP is integrated into a web-based retrofit toolkit, the Commercial Building Energy Saver, which provides a platform for energy retrofit decision making by querying DEEP and unearthing recommended ECMs, their estimated energy savings and financial payback. - Highlights: • A DEEP (database of energy efficiency performance) supports building retrofit. • DEEP is an SQL database with pre-simulated results from 10 million EnergyPlus runs. • DEEP covers 7 building types, 6 vintages, 16 climates, and 100 energy measures. • DEEP accelerates retrofit of small commercial buildings to save energy use and cost. • DEEP can be expanded and integrated with third-party energy software tools.

Strategy and validation of fiducialisation for the pre-alignment of CLIC components

CERN Document Server

Griffet, S; Kemppinen, J; Mainaud Durand, H; Rude, V; Sterbini, G

2012-01-01

The feasibility of the high energy e+ e- linear collider CLIC (Compact Linear Collider) is very dependent on the ability to accurately pre-align its components. There are two 20 km long Main Linacs which meet in an interaction point (IP). The Main Linacs are composed of thousands of 2 m long modules. One of the challenges is to meet very tight alignment tolerances at the level of CLIC module: for example, the magnetic centre of a Drive Beam Quad needs to be aligned within 20 µm rms with respect to a straight line. Such accuracies cannot be achieved using usual measurement devices. Thus it is necessary to work in close collaboration with the metrology lab. To test and improve many critical points, including alignment, a CLIC mock-up is being assembled at CERN. This paper describes the application of the strategy of fiducialisation for the pre-alignment of CLIC mock-up components. It also deals with the first results obtained by performing measurements using a CMM (Coordinate Measuring Machine) to ensure the f...

The influence of plasma density decreasement by pre-pulse on the laser wakefield acceleration

Directory of Open Access Journals (Sweden)

Ke-Gong Dong

2011-12-01

Full Text Available In the laser wakefield acceleration, the generation of electron beam is very sensitive to the plasma density. Not only the laser-wakefield interaction, but also the electron trapping and acceleration would be effected by the plasma density. However, the plasma density could be changed in the experiment by different reasons, which will result in the mismatch of parameters arranged initially. Forward Raman scattering spectrum demonstrated that the interaction density was decreased obviously in the experiment, which was verified by the pre-pulse conditions and two-dimensional particle-in-cell simulations. It was demonstrated that the plasma density was very important on the self-evolutions and energy coupling of laser pulse and wakefield, and eventually the energy spectrum of electron beam.

Influence of surface pre-treatment on the electronic levels in silicon MaWCE nanowires.

Science.gov (United States)

Venturi, Giulia; Castaldini, Antonio; Schleusener, Alexander; Sivakov, Vladimir; Cavallini, Anna

2015-05-15

Deep level transient spectroscopy (DLTS) was performed on n-doped silicon nanowires grown by metal-assisted wet chemical etching (MaWCE) with gold as the catalyst in order to investigate the energetic scheme inside the bandgap. To observe the possible dependence of the level scheme on the processing temperature, DLTS measurements were performed on the nanowires grown on a non-treated Au/Si surface and on a thermally pre-treated Au/Si surface. A noticeable modification of the configuration of the energy levels was observed, induced by the annealing process. Based on our results on these MaWCE nanowires and on literature data about deep levels in bulk silicon, some hypotheses were advanced regarding the identification of the defects responsible of the energy levels revealed.

Effect of Partial Pre-Extraction of Hemicelluloses on the Properties of Pinus radiata Chemimechanical Pulps

Directory of Open Access Journals (Sweden)

Pablo Reyes

2015-09-01

Full Text Available Extraction of hemicelluloses prior to pulping and conversion of the extracted hemicelluloses to other bioproducts could provide additional revenue to traditional pulp and paper industries. The effect of hemicelluloses pre-extraction with a hydrothermal (HT process on Pinus radiata chemimechanical pulp (CMP properties was investigated in this study. The HT extraction resulted in a release of 7% to 58% of the initial amount of hemicelluloses from the wood. The extraction yield increased with temperature and extraction time. This hemicellulosic fraction was in the form of low molar mass oligomers with molecular weights varying from 1.5 to 100 kDa. Compared with the control (unextracted CMP pulp, the HT pre-extraction significantly reduced the refining energy to obtain a given fibrillation degree (freeness. The pulp yield with the HT/CMP process was in the range of 56% to 75%. Fiber properties of the pulps from pre-extracted wood, such as fiber length, were reduced, while increases in fiber width, fines content, fiber coarseness, and kink index were observed in comparison with the control pulps. The strength properties of CMP pulps decreased with increasing amounts of hemicellulose removal during the stage prior to pulping.

The adsorption of NO on an oxygen pre-covered Pt(1 1 1) surface: in situ high-resolution XPS combined with molecular beam studies

Science.gov (United States)

Zhu, J. F.; Kinne, M.; Fuhrmann, T.; Tränkenschuh, B.; Denecke, R.; Steinrück, H.-P.

2003-12-01

Adsorption of NO on a Pt(1 1 1) surface pre-covered with a p(2 × 2) atomic oxygen layer has been studied in situ by high-resolution X-ray photoelectron spectroscopy and temperature-programmed XPS using third-generation synchrotron radiation at BESSY II, Berlin, combined with molecular beam techniques and ex situ by low energy electron diffraction and temperature-programmed desorption. O 1s XP spectra reveal that an ordered p(2 × 2)-O layer dramatically changes the adsorption behavior of NO as compared to the clean surface. The atomic oxygen occupies fcc hollow sites, and therefore blocks NO adsorption on these sites, which are energetically preferred on clean Pt(1 1 1). As a consequence, NO populates on-top sites at low coverage. At 110 K for higher coverages, NO can additionally adsorb on hcp hollow sites, thereby inducing a shift of the O 1s binding energy of atomic oxygen towards lower energies by about 0.25 eV. The bond strength of the hcp hollow NO species to the substrate is weakened by the presence of atomic oxygen. A sharp p(2 × 2) LEED pattern is observed for NO adsorption on the oxygen pre-covered surface, up to saturation coverage. The total saturation coverage of NO on Pt(1 1 1) pre-covered with varying amounts of oxygen (below 0.25 ML) decreases linearly with the coverage of oxygen. The initial sticking coefficient of NO is reduced from 0.96 on clean Pt(1 1 1) to 0.88 on a p(2 × 2) oxygen pre-covered surface.

Environmental Policies, Product Market Regulation and Innovation in Renewable Energy

International Nuclear Information System (INIS)

Nesta, Lionel; Vona, Francesco; Nicolli, Francesco

2012-10-01

We investigate the effectiveness of policies in favor of innovation in renew- able energy under different levels of competition. Using information regarding renewable energy policies, product market regulation and high-quality green patents for OECD countries since the late 1970's, we develop a pre-sample mean count-data econometric specification that also accounts for the endogeneity of policies. We find that renewable energy policies are significantly more effective in fostering green innovation in countries with deregulated energy markets. We also find that public support for renewable energy is crucial only in the generation of high-quality green patents, whereas competition enhances the generation of green patents irrespective of their quality. (authors)

Kapitał intelektualny a edukacyjny podyplomowego kształcenia pedagogicznego: jego fenomen i podstawy koncepcyjne

Directory of Open Access Journals (Sweden)

Eugenia Czernyszowa

2014-12-01

Full Text Available W artykule są rozpatrzone oddzielne aspekty fenomenu kapitału intelektualnego, że uogólniają współczesne naukowe wyobrażenia kategorii «kapitał intelektualny»; argumentowano aktualność rozwiązania ujawnionego szeregu przeciwieństw w teorii i praktyce kształtowania podejści do badania zaznaczonego problemu; ujawniono i uogólniono możliwości realizacji konceptualnych zasad rozwoju kapitału oświatowego w systemie podyplomowej edukacji pedagogicznej.

Study on Safety Assessment for TINT- Pre disposal Radioactive Waste Management Facilities by the Application of SAFRAN Software

International Nuclear Information System (INIS)

Ya-anant, Nanthavan

2011-06-01

Full text: The Radioactive Waste Management Center, Thailand Institute of Nuclear Technology (TINT) provides a centralized radioactive waste management (RWM) service in the country. The pre disposal RWM facilities are composed of low and intermediate level waste treatment and storage facilities. The benefits of this study are (1) to improve the safety of pre disposal RWM facilities (2) to experience with the SAFRAN software tool for the safety assessment of pre disposal RWM facilities, which has been developed following to the methodology from International Atomic Energy Agency (IAEA). The work was performed on collecting all waste management data, the diagram of facilities, buildings, location, procedure, waste classification, waste form, radiological/chemical/physical properties including scenarios in normal and accidental conditions. The result of normal condition is that the effective dose per year of worker and public is less than 20 mSv and 1 mSv respectively. So the TINT-RWM operation is safe, as referred to the regulation

Dynamic high pressure induced strong and weak hydrogen bonds enhanced by pre-resonance stimulated Raman scattering in liquid water.

Science.gov (United States)

Wang, Shenghan; Fang, Wenhui; Li, Fabing; Gong, Nan; Li, Zhanlong; Li, Zuowei; Sun, Chenglin; Men, Zhiwei

2017-12-11

355 nm pulsed laser is employed to excite pre-resonance forward stimulated Raman scattering (FSRS) of liquid water at ambient temperature. Due to the shockwave induced dynamic high pressure, the obtained Raman spectra begin to exhibit double peaks distribution at 3318 and 3373 cm -1 with the input energy of 17 mJ,which correspond with OH stretching vibration with strong and weak hydrogen (H) bonds. With laser energy rising from 17 to 27 mJ, the Stokes line at 3318 cm -1 shifts to 3255 and 3230 cm -1 because of the high pressure being enlarged. When the energy is up to 32 mJ, only 3373 cm -1 peak exists. The strong and weak H bond exhibit quite different energy dependent behaviors.

Comparison of Demand Response Performance with an EnergyPlus Model in a Low Energy Campus Building

Energy Technology Data Exchange (ETDEWEB)

Dudley, Junqiao Han; Black, Doug; Apte, Mike; Piette, Mary Ann; Berkeley, Pam

2010-05-14

We have studied a low energy building on a campus of the University of California. It has efficient heating, ventilation, and air conditioning (HVAC) systems, consisting of a dual-fan/dual-duct variable air volume (VAV) system. As a major building on the campus, it was included in two demand response (DR) events in the summers of 2008 and 2009. With chilled water supplied by thermal energy storage in the central plant, cooling fans played a critical role during DR events. In this paper, an EnergyPlus model of the building was developed and calibrated. We compared both whole-building and HVAC fan energy consumption with model predictions to understand why demand savings in 2009 were much lower than in 2008. We also used model simulations of the study building to assess pre-cooling, a strategy that has been shown to improve demand saving and thermal comfort in many types of building. This study indicates a properly calibrated EnergyPlus model can reasonably predict demand savings from DR events and can be useful for designing or optimizing DR strategies.

REACTION KINETICS SELF-PROPOGATION REGIME DURING PRE-IGNITION PERIOD

Directory of Open Access Journals (Sweden)

D. D. Polishchuk

2015-11-01

Full Text Available Self-propagation high temperature synthesis (SHS technological regulations application is mainly limited by transformation processes taking place in the pre-ignition period. Zn-S, Zn-Se, Ti-C and 3Ni-Al small sample systems ignition experimental study was carried out under heating conditions in inert atmosphere with temperature values T = 1200K.It was shown that at this temperature level a chemical reaction can be initiated, turning into a self-sustaining mode. Wherein the reaction limiting factors can be mass transfer processes. Ignition temperatures were determined and plotted via the samples size. A physical ignition model was developed assuming the pre-ignition period limiting reaction Arrhenius law.The inverse combustion problem solution made it possible to calculate the low-temperature (T = 800 ÷ 1200K reaction kinetic constant values. Comparison thus obtained values  with the known data of other researchers showed their good agreement.Activation energy values for the Zn-S system were used to calculate the heat wave propagation speed. This value appeared to coincide with experimental values.Obtained results analysis leads to the conclusion about the availability and justification for the proposed method of express-analysis of presupposed, but previously not studied SHS systems. The results thus obtained allow us to estimate conditions for the SHS technology implementation, the reactor characteristic sizes and the thermal wave’s propagation speed.

An atomistic methodology of energy release rate for graphene at nanoscale

International Nuclear Information System (INIS)

Zhang, Zhen; Lee, James D.; Wang, Xianqiao

2014-01-01

Graphene is a single layer of carbon atoms packed into a honeycomb architecture, serving as a fundamental building block for electric devices. Understanding the fracture mechanism of graphene under various conditions is crucial for tailoring the electrical and mechanical properties of graphene-based devices at atomic scale. Although most of the fracture mechanics concepts, such as stress intensity factors, are not applicable in molecular dynamics simulation, energy release rate still remains to be a feasible and crucial physical quantity to characterize the fracture mechanical property of materials at nanoscale. This work introduces an atomistic simulation methodology, based on the energy release rate, as a tool to unveil the fracture mechanism of graphene at nanoscale. This methodology can be easily extended to any atomistic material system. We have investigated both opening mode and mixed mode at different temperatures. Simulation results show that the critical energy release rate of graphene is independent of initial crack length at low temperature. Graphene with inclined pre-crack possesses higher fracture strength and fracture deformation but smaller critical energy release rate compared with the graphene with vertical pre-crack. Owing to its anisotropy, graphene with armchair chirality always has greater critical energy release rate than graphene with zigzag chirality. The increase of temperature leads to the reduction of fracture strength, fracture deformation, and the critical energy release rate of graphene. Also, higher temperature brings higher randomness of energy release rate of graphene under a variety of predefined crack lengths. The energy release rate is independent of the strain rate as long as the strain rate is small enough

A history of the Atomic Energy Control Board

International Nuclear Information System (INIS)

Sims, G.H.E.

1980-07-01

Topics covered include the pre-history of the AECB, its creation, early operations and evolution, its relations with nuclear research, the uranium industry, and the nuclear power industry, its involvement with transportation and safeguards, and some current problems. The focus is on the Atomic Energy Control Act and regulations derived from the act

Maternal pre-pregnancy obesity and neuropsychological development in pre-school children: a prospective cohort study.

Science.gov (United States)

Casas, Maribel; Forns, Joan; Martínez, David; Guxens, Mònica; Fernandez-Somoano, Ana; Ibarluzea, Jesus; Lertxundi, Nerea; Murcia, Mario; Rebagliato, Marisa; Tardon, Adonina; Sunyer, Jordi; Vrijheid, Martine

2017-10-01

BackgroundMaternal pre-pregnancy obesity may impair infant neuropsychological development, but it is unclear whether intrauterine or confounding factors drive this association.MethodsWe assessed whether maternal pre-pregnancy obesity was associated with neuropsychological development in 1,827 Spanish children. At 5 years, cognitive and psychomotor development was assessed using McCarthy Scales of Children's Abilities, attention deficit hyperactivity disorder (ADHD) symptoms using the Criteria of Diagnostic and Statistical Manual of Mental Disorders, and autism spectrum disorder symptoms using the Childhood Asperger Syndrome Test. Models were adjusted for sociodemographic factors and maternal intelligence quotient. We used paternal obesity as negative control exposure as it involves the same source of confounding than maternal obesity.ResultsThe percentage of obese mothers and fathers was 8% and 12%, respectively. In unadjusted models, children of obese mothers had lower scores than children of normal weight mothers in all McCarthy subscales. After adjustment, only the verbal subscale remained statistically significantly reduced (β: -2.8; 95% confidence interval: -5.3, -0.2). No associations were observed among obese fathers. Maternal and paternal obesity were associated with an increase in ADHD-related symptoms. Parental obesity was not associated with autism symptoms.ConclusionMaternal pre-pregnancy obesity was associated with a reduction in offspring verbal scores at pre-school age.

Energy drink consumption is associated with unhealthy dietary behaviours among college youth.

Science.gov (United States)

Poulos, Natalie S; Pasch, Keryn E

2015-11-01

Energy drink consumption has been associated with a variety of health risk behaviours, yet little research has explored the relationship between energy drinks and dietary behaviours of emerging adults. Therefore, the purpose of this study was to explore the relationship between energy drink consumption and dietary behaviours among energy drink users and non-users within a sample of college youth. College freshmen (n = 585, m age = 18.7 years; 47% non-Hispanic White, 20.9% Hispanic, 25.5% Asian, 2.7% non-Hispanic Black and 4.4% other; 56% female), at a large, southwest university self-reported their energy drink consumption in the past week and a variety of dietary behaviours, including past week soda, diet soda, pre-packaged salty snacks, pre-packaged sweet snacks, fast food, restaurant food, frozen food, fruits, vegetables, milk and breakfast consumption. Linear regression analyses were run to determine associations between energy drink consumption and dietary behaviour among users and non-users of energy drinks. Analyses controlled for gender, race/ethnicity and body mass index (BMI). Overall, 17.5% of students had consumed energy drinks in the past week. Energy drink users were more likely to be male, White and have a greater BMI. Students also reported low past week intake of fruits, vegetables, milk and breakfast. Past week energy drink consumption was associated with increased soda and frozen meal consumption. Given a rapidly expanding energy drink market, future dietary interventions among college youth may want to consider the implications of energy drinks, as results of this study suggest consumption of these beverages is associated with unhealthy dietary behaviours and a greater BMI. © Royal Society for Public Health 2015.

A Conversation on Data Mining Strategies in LC-MS Untargeted Metabolomics: Pre-Processing and Pre-Treatment Steps

Directory of Open Access Journals (Sweden)

Fidele Tugizimana

2016-11-01

Full Text Available Untargeted metabolomic studies generate information-rich, high-dimensional, and complex datasets that remain challenging to handle and fully exploit. Despite the remarkable progress in the development of tools and algorithms, the “exhaustive” extraction of information from these metabolomic datasets is still a non-trivial undertaking. A conversation on data mining strategies for a maximal information extraction from metabolomic data is needed. Using a liquid chromatography-mass spectrometry (LC-MS-based untargeted metabolomic dataset, this study explored the influence of collection parameters in the data pre-processing step, scaling and data transformation on the statistical models generated, and feature selection, thereafter. Data obtained in positive mode generated from a LC-MS-based untargeted metabolomic study (sorghum plants responding dynamically to infection by a fungal pathogen were used. Raw data were pre-processed with MarkerLynxTM software (Waters Corporation, Manchester, UK. Here, two parameters were varied: the intensity threshold (50–100 counts and the mass tolerance (0.005–0.01 Da. After the pre-processing, the datasets were imported into SIMCA (Umetrics, Umea, Sweden for more data cleaning and statistical modeling. In addition, different scaling (unit variance, Pareto, etc. and data transformation (log and power methods were explored. The results showed that the pre-processing parameters (or algorithms influence the output dataset with regard to the number of defined features. Furthermore, the study demonstrates that the pre-treatment of data prior to statistical modeling affects the subspace approximation outcome: e.g., the amount of variation in X-data that the model can explain and predict. The pre-processing and pre-treatment steps subsequently influence the number of statistically significant extracted/selected features (variables. Thus, as informed by the results, to maximize the value of untargeted metabolomic data

Existing Whole-House Solutions Case Study: Community-Scale Energy Modeling - Southeastern United States

Energy Technology Data Exchange (ETDEWEB)

None

2014-12-01

Community-scale energy modeling and testing are useful for determining energy conservation measures that will effectively reduce energy use. To that end, IBACOS analyzed pre-retrofit daily utility data to sort homes by energy consumption, allowing for better targeting of homes for physical audits. Following ASHRAE Guideline 14 normalization procedures, electricity consumption of 1,166 all-electric, production-built homes was modeled. The homes were in two communities: one built in the 1970s and the other in the mid-2000s.

49 CFR 663.23 - Description of pre-award audit.

Science.gov (United States)

2010-10-01

... 49 Transportation 7 2010-10-01 2010-10-01 false Description of pre-award audit. 663.23 Section 663.23 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL TRANSIT ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PRE-AWARD AND POST-DELIVERY AUDITS OF ROLLING STOCK PURCHASES Pre-Award Audits § 663.23 Description of pre-award...

Pre-K as School Turnaround Strategy

Science.gov (United States)

Buenafe, Anthony Q.

2011-01-01

Both state and local school systems, recognizing the strong and growing evidence of pre-kindergarten's effectiveness in closing achievement gaps, are implementing early learning programs as part of their education reform efforts. In low-performing districts, pre-k has emerged as a promising turnaround strategy, reaching children before they become…

Pre-crash system validation with PRESCAN and VEHIL

NARCIS (Netherlands)

Gietelink, O.J.; Verburg, D.J.; Labibes, K.; Oostendorp, A.F.

2004-01-01

This paper presents the tools for design and validation of Pre-Crash Systems: the software tool PRE-crash SCenario ANalyzer (PRESCAN) and the VEhicle-Hardware-In-the-Loop (VEHIL) facility. PRESCAN allows to investigate a pre-crash scenario in simulation. This scenario can then be compared with tests

Thermal pre-treatment of primary and secondary sludge at 70 °C prior to anaerobic digestion

DEFF Research Database (Denmark)

Skiadas, Ioannis; Gavala, Hariklia N.; Lu, J.

2005-01-01

In general, mesophilic anaerobic digestion of sewage sludge is more widely used compared tothermophilic digestion, mainly because of the lower energy requirements and higher stability of the process. However, the thermophilic anaerobic digestion process is usually characterised by accelerated...... studyinvestigates the effect of the pre-treatment at 70 °C on thermophilic (55 °C) anaerobic digestion of primaryand secondary sludge in continuously operated digesters. Thermal pre-treatment of primary and secondarysludge at 70 °C enhanced the removal of organic matter and the methane production during...... the subsequentanaerobic digestion step at 55 °C. It also greatly contributed to the destruction of pathogens present inprimary sludge. Finally it results in enhanced microbial activities of the subsequent anaerobic stepsuggesting that the same efficiencies in organic matter removal and methane recovery could be obtained...

Impact of microwave pre-treatment on the batch anaerobic digestion of two-phase olive mill solid residue: a kinetic approach

International Nuclear Information System (INIS)

Rincon, B.; Gonzalez de Canales, M.; Martin, A.; Borja, R.

2016-01-01

The effect of a microwave (MW) pre-treatment on two-phase olive mill solid residue (OMSR) or alperujo with a view to enhancing its anaerobic digestibility was studied. The MW pre-treatment was carried out at a power of 800 W and at a targeted temperature of 50 °C using different heating rates and holding times. The following specific energies were applied: 4377 kJ·kg TS−1 (MW1), 4830 kJ·kg TS−1 (MW2), 7170 kJ·kg TS−1 (MW3) and 7660 kJ·kg TS−1 (MW4). The maximum methane yield, 395±1 mL CH4·g VSadded−1, was obtained for MW4. The effect of the pre-treatment on the kinetics of the process was also studied. The methane production curves generated during the batch tests showed a first exponential stage and a second sigmoidal stage for all the cases studied. In the first stage, the kinetic constant for the pre-treatment MW1 was 54.8% higher than that obtained for untreated OMSR. [es

Voltage pre-regulator without insulation with high efficiency; Pre-regulador de tension sin aislamiento con alta eficiencia

Energy Technology Data Exchange (ETDEWEB)

Lopez Ramos, Octaviano

2003-04-15

Nowadays there are problems caused by the inadequate and inefficient use of the electrical energy in the supplying systems, these problems are becoming more complicated with the passage of time, due to the proliferation of electronic equipment that does not incorporate some solutions to such problems. This has originated a tendency towards the development of systems that process with higher efficiency ({eta}) the electrical energy. In addition of making good use of the energy, they are designed so that they can correct the power factor (PF) and therefore reduce the contamination of harmonics in the network; which causes faults or destruction in other electronic equipment. Additionally it is possible to design them to obtain a good dynamic response, which assures that they can efficiently counteract load changes. The non-lineal characteristic that is present in all of the power supplies, which base its entrance on a rectification and filtration stage and, causes a low power factor (PF) and a high total harmonic distortion (THD). The factor is to contaminate the electric network, which can cause faults or breakdowns of other equipment. Since approximately 15 years the concern for solving this problem of the inadequate use of the energy has been taking importance, developing converters that correct the PF (pre-regulator) and that traditionally are connected in cascade with the typical stage of conversion of direct current to direct current (DC-DC) used to regulate the voltage; this solution has a low efficiency ({eta}) and high cost, by the excess of components connected in cascade. Nevertheless the dynamic response (DR) is adequate since it counts with separate stages for the correction of the PF and the regulation. From a revision of the state-of-the-art, in this thesis a new topology of pre-regulator for power supplies with a high efficiency is presented ({eta}), due to a novel strategy of managing the energy; also it corrects the PF. This represents an advance

Development of a pre-ignition submodel for hydrogen engines

Energy Technology Data Exchange (ETDEWEB)

Al-Baghdadi, Sadiq [University of Babylon (Iraq). Dept. of Mechanical Engineering

2005-10-15

In hydrogen-fuelled spark ignition engine applications, the onset of pre-ignition remains one of the prime limitations that needs to be addressed to avoid its incidence and achieve superior performance. This paper describes a new pre-ignition submodel for engine modelling codes. The effects of changes in key operating variables, such as compression ratio, spark timing, intake pressure, and temperature on pre-ignition limiting equivalence ratios are established both analytically and experimentally. With the established pre-ignition model, it is possible not only to investigate whether pre-ignition is observed with changing operating and design parameters, but also to evaluate those parameters' effects on the maximum possible pre-ignition intensity. (author)

Slovenian Pre-Service Teachers' Prototype Biography

Science.gov (United States)

Lipovec, Alenka; Antolin, Darja

2014-01-01

In this article we apply narrative methodology to the study of pre-service elementary teachers' school-time memories connected to mathematics education. In the first phase of our empirical study we asked 214 Slovenian pre-service teachers to write their mathematical autobiographies. On the basis of the mathematical autobiographies we constructed a…

77 FR 23241 - Lock+ Hydro Friends Fund XXX, LLC; Notice of Intent To File License Application, Filing of Pre...

Science.gov (United States)

2012-04-18

... Friends Fund XXX, LLC; Notice of Intent To File License Application, Filing of Pre-Application Document.... Date Filed: February 20, 2012. d. Submitted By: Lock+ Hydro Friends Fund XXX, LLC. e. Name of Project... Applicant Contact: Mr. Mark R. Stover, Lock+\\TM\\ Hydro Friends Fund XXX, c/o Hydro Green Energy, LLC, 900...

Optimization of helicopter hub locations and fleet composition in the Brazilian pre-salt fields

OpenAIRE

Norddal, Ida Kristine

2013-01-01

When implementing oil and gas operations in the Santos Basin pre-salt fields, Brazilian energy corporation Petróleo Brasileiro S.A (Petrobras) faces some significant challenges. One of these is the large distance from shore: exceeding 300 km at the most, it is about three times the distance to oil fields explored in the past. This has great impact on the company's offshore helicopter operations. In its current form, helicopters transport employees directly between onshore airport bases and of...

Pre-employment medical testing in Brazil: ethical challenges.

Science.gov (United States)

Palhares, Dario; Laurentino dos Santos, Ivone

2012-01-01

Pre-employment medical tests, considered to be a practice within the subspecialty of occupational medicine, are ordered by physicians on behalf of employers. Candidates for a job may be rejected if they are found to suffer from a condition that can be worsened by the job, or one that may put other workers at risk. As the physician who orders pre-employment tests is chosen by the employer, pre-employment tests can violate both the autonomy and the privacy of the individual. This paper discusses ethical conflicts inherent in pre-employment medical testing.

Electronic energy distribution function at high electron swarm energies in neon

International Nuclear Information System (INIS)

Brown, K.L.; Fletcher, J.

1995-01-01

Electron swarms moving through a gas under the influence of an applied electric field have been extensively investigated. Swarms at high energies, as measured by the ratio of the applied field to the gas number density, E/N, which are predominant in many applications have, in general, been neglected. Discharges at E/N in the range 300 0 < 133 Pa using a differentially pumped vacuum system in which the swarm electrons are extracted from the discharge and energy analysed in both a parallel plate retarded potential analyser and a cylindrical electrostatic analyser. Both pre-breakdown and post-breakdown discharges have been studied. Initial results indicate that as the discharge traverses breakdown no sudden change in the nature of the discharge occurs and that the discharge can be described by both a Monte Carlo simulation and by a Boltzmann treatment given by Phelps et al. (1987). 18 refs., 8 figs

Pre-Service Teachers' Conceptions of Probability

Science.gov (United States)

Odafe, Victor U.

2011-01-01

Probability knowledge and skills are needed in science and in making daily decisions that are sometimes made under uncertain conditions. Hence, there is the need to ensure that the pre-service teachers of our children are well prepared to teach probability. Pre-service teachers' conceptions of probability are identified, and ways of helping them…

Coupled cooling method and application of latent heat thermal energy storage combined with pre-cooling of envelope: Method and model development

International Nuclear Information System (INIS)

Yuan, Yanping; Gao, Xiangkui; Wu, Hongwei; Zhang, Zujin; Cao, Xiaoling; Sun, Liangliang; Yu, Nanyang

2017-01-01

The traditional cooling methods cannot meet the requirements of safety, stability, reliability and no-power at the same time under some special circumstances. In this study, a new coupled cooling method of Latent Heat Thermal Energy Storage (LHTES) combined with Pre-cooling of Envelope (PE) is proposed and the numerical model of the coupled cooling method is developed. In the current study, a refuge chamber is selected as a case study. A semi-analytical method is used to analyze the cold storage performance of the Surrounding Rock (SR). Afterwards, a numerical model of the coupled cooling system, which takes the heat source, SR, Phase Change Material (PCM) and air heat transfer into consideration, is further established. The study identified that the simplified semi-analytical calculation formula with the diagram of the cold storage quantity of SR are very helpful for engineering calculation. The influence of the Fourier and Biot number on the cold storage capacity of SR can be easily analyzed. In addition, the whole-field model of the coupled cooling system is completely developed based on the PCM unit. - Highlights: • A new coupled cooling method that combines LHTES with PE is proposed. • This method can be applicable to a high-temperature and no-power circumstance. • The simplified calculation formula of the cold storage quantity of SR is given. • An efficient simulation model of the coupled cooling system is established.

The HESP (High Energy Solar Physics) project

Science.gov (United States)

Kai, K.

1986-01-01

A project for space observations of solar flares for the coming solar maximum phase is briefly described. The main objective is to make a comprehensive study of high energy phenomena of flares through simultaneous imagings in both hard and soft X-rays. The project will be performed with collaboration from US scientists. The HESP (High Energy Solar Physics) WG of ISAS (Institute of Space and Astronautical Sciences) has extensively discussed future aspects of space observations of high energy phenomena of solar flares based on successful results of the Hinotori mission, and proposed a comprehensive research program for the next solar maximum, called the HESP (SOLAR-A) project. The objective of the HESP project is to make a comprehensive study of both high energy phenomena of flares and quiet structures including pre-flare states, which have been left uncovered by SMM and Hinotori. For such a study simultaneous imagings with better resolutions in space and time in a wide range of energy will be extremely important.

Monitoring Pre-Stressed Composites Using Optical Fibre Sensors.

Science.gov (United States)

Krishnamurthy, Sriram; Badcock, Rodney A; Machavaram, Venkata R; Fernando, Gerard F

2016-05-28

Residual stresses in fibre reinforced composites can give rise to a number of undesired effects such as loss of dimensional stability and premature fracture. Hence, there is significant merit in developing processing techniques to mitigate the development of residual stresses. However, tracking and quantifying the development of these fabrication-induced stresses in real-time using conventional non-destructive techniques is not straightforward. This article reports on the design and evaluation of a technique for manufacturing pre-stressed composite panels from unidirectional E-glass/epoxy prepregs. Here, the magnitude of the applied pre-stress was monitored using an integrated load-cell. The pre-stressing rig was based on a flat-bed design which enabled autoclave-based processing. A method was developed to end-tab the laminated prepregs prior to pre-stressing. The development of process-induced residual strain was monitored in-situ using embedded optical fibre sensors. Surface-mounted electrical resistance strain gauges were used to measure the strain when the composite was unloaded from the pre-stressing rig at room temperature. Four pre-stress levels were applied prior to processing the laminated preforms in an autoclave. The results showed that the application of a pre-stress of 108 MPa to a unidirectional [0]16 E-glass/913 epoxy preform, reduced the residual strain in the composite from -600 µε (conventional processing without pre-stress) to approximately zero. A good correlation was observed between the data obtained from the surface-mounted electrical resistance strain gauge and the embedded optical fibre sensors. In addition to "neutralising" the residual stresses, superior axial orientation of the reinforcement can be obtained from pre-stressed composites. A subsequent publication will highlight the consequences of pres-stressing on fibre alignment, the tensile, flexural, compressive and fatigue performance of unidirectional E-glass composites.

Monitoring Pre-Stressed Composites Using Optical Fibre Sensors

Directory of Open Access Journals (Sweden)

Sriram Krishnamurthy

2016-05-01

Full Text Available Residual stresses in fibre reinforced composites can give rise to a number of undesired effects such as loss of dimensional stability and premature fracture. Hence, there is significant merit in developing processing techniques to mitigate the development of residual stresses. However, tracking and quantifying the development of these fabrication-induced stresses in real-time using conventional non-destructive techniques is not straightforward. This article reports on the design and evaluation of a technique for manufacturing pre-stressed composite panels from unidirectional E-glass/epoxy prepregs. Here, the magnitude of the applied pre-stress was monitored using an integrated load-cell. The pre-stressing rig was based on a flat-bed design which enabled autoclave-based processing. A method was developed to end-tab the laminated prepregs prior to pre-stressing. The development of process-induced residual strain was monitored in-situ using embedded optical fibre sensors. Surface-mounted electrical resistance strain gauges were used to measure the strain when the composite was unloaded from the pre-stressing rig at room temperature. Four pre-stress levels were applied prior to processing the laminated preforms in an autoclave. The results showed that the application of a pre-stress of 108 MPa to a unidirectional [0]16 E-glass/913 epoxy preform, reduced the residual strain in the composite from −600 µε (conventional processing without pre-stress to approximately zero. A good correlation was observed between the data obtained from the surface-mounted electrical resistance strain gauge and the embedded optical fibre sensors. In addition to “neutralising” the residual stresses, superior axial orientation of the reinforcement can be obtained from pre-stressed composites. A subsequent publication will highlight the consequences of pres-stressing on fibre alignment, the tensile, flexural, compressive and fatigue performance of unidirectional E

Monitoring Pre-Stressed Composites Using Optical Fibre Sensors

Science.gov (United States)

Krishnamurthy, Sriram; Badcock, Rodney A.; Machavaram, Venkata R.; Fernando, Gerard F.

2016-01-01

Residual stresses in fibre reinforced composites can give rise to a number of undesired effects such as loss of dimensional stability and premature fracture. Hence, there is significant merit in developing processing techniques to mitigate the development of residual stresses. However, tracking and quantifying the development of these fabrication-induced stresses in real-time using conventional non-destructive techniques is not straightforward. This article reports on the design and evaluation of a technique for manufacturing pre-stressed composite panels from unidirectional E-glass/epoxy prepregs. Here, the magnitude of the applied pre-stress was monitored using an integrated load-cell. The pre-stressing rig was based on a flat-bed design which enabled autoclave-based processing. A method was developed to end-tab the laminated prepregs prior to pre-stressing. The development of process-induced residual strain was monitored in-situ using embedded optical fibre sensors. Surface-mounted electrical resistance strain gauges were used to measure the strain when the composite was unloaded from the pre-stressing rig at room temperature. Four pre-stress levels were applied prior to processing the laminated preforms in an autoclave. The results showed that the application of a pre-stress of 108 MPa to a unidirectional [0]16 E-glass/913 epoxy preform, reduced the residual strain in the composite from −600 µε (conventional processing without pre-stress) to approximately zero. A good correlation was observed between the data obtained from the surface-mounted electrical resistance strain gauge and the embedded optical fibre sensors. In addition to “neutralising” the residual stresses, superior axial orientation of the reinforcement can be obtained from pre-stressed composites. A subsequent publication will highlight the consequences of pres-stressing on fibre alignment, the tensile, flexural, compressive and fatigue performance of unidirectional E-glass composites. PMID

Pre-Service Teachers' Opinions on Teaching Thinking Skills

Science.gov (United States)

Akinoglu, Orhan; Karsantik, Yasemin

2016-01-01

The purpose of the present study is to determine pre-service teachers' opinions on teaching thinking skills. 134 senior pre-service pre-school, English and mathematics teachers studying at a state university in Istanbul participated in the study which is designed based on survey model. A questionnaire which was developed by the researchers was…

Pre-anaesthetic screening of geriatric dogs

Directory of Open Access Journals (Sweden)

K.E. Joubert

2007-05-01

Full Text Available Pre-anaesthetic screening has been advocated as a valuable tool for improving anaesthetic safety and determining anaesthetic risk. This study was done determine whether pre-anaesthetic screening result in cancellation of anaesthesia and the diagnosis of new clinical conditions in geriatric dogs. One hundred and one dogs older than 7 years of age provided informed owner consent were included in the study. Each dog was weighed, and its temperature, pulse and respiration recorded. An abdominal palpation, examination of the mouth, including capillary refill time and mucous membranes, auscultation, body condition and habitus was performed and assessed. A cephalic catheter was placed and blood drawn for pre-anaesthetic testing. A micro-haematocrit tube was filled and the packed cell volume determined. The blood placed was in a test tube, centrifuged and then analysed on an in-house blood analyser. Alkaline phosphatase, alanine transferase, urea, creatinine, glucose and total protein were determined. A urine sample was then obtained by cystocentesis, catheterisation or free-flow for analysis. The urine specific gravity was determined with a refractometer. A small quantity of urine was then placed on a dip stick. Any new diagnoses made during the pre-anaesthetic screening were recorded. The average age of the dogs was 10.99+2.44 years and the weight was 19.64+15.78 kg. There were 13 dogs with pre-existing medical conditions. A total of 30 new diagnoses were made on the basis of the pre-anaesthetic screening. The most common conditions were neoplasia, chronic kidney disease and Cushing's disease. Of the 30 patients with a new diagnosis, 13 did not undergo anaesthesia as result of the new diagnosis. From this study it can be concluded that screening of geriatric patients is important and that sub-clinical disease could be present in nearly 30 % of these patients. The value of screening before anaesthesia is perhaps more questionable in terms of

Pre-shipment preparations at the Savannah River Site - WSRC's technical basis to support DOE's approval to ship

International Nuclear Information System (INIS)

Thomas, Jay E.; Bickley, Donald W.; Conatser, E. Ray

2000-01-01

In the first four years of the Foreign Research Reactor (FRR) Spent Nuclear Fuel (SNF) Return Program following resumption of the SNF return program with the DOE-EIS ROD in May 1996, 13 shipments involving 77 casks with over 2,600 assemblies have been safely received and stored at the Savannah River Site (SRS). Each fuel type has gone through a rigorous pre-shipment preparation process that includes fuel characterization, criticality safety reviews, and operational reviews, culminating in the Department of Energy's (DOE's) authorization to ship. Ideally, the authorization to ship process should begin two years in advance of the fuel receipt with an agreement between the Department of Energy - Head Quarters (DOE-HQ) and the research reactor government on the conditions and protocol for the spent nuclear fuel return, with a target of DOE shipment authorization at least two months before facility loading. A visit by representatives from the Department of Energy - Savannah River (DOE-SR) and Westinghouse Savannah River Company (WSRC), DOE's Management and Operations (M and O) Contractor for the SRS, to the research reactor facility is then scheduled for the purpose of finalizing contractual arrangements (DOE-SR), facility assessments, and initial fuel inspections. An extensive effort is initiated at this time to characterize the fuel in a standard format as identified in the Appendix A attachment to the contract. The Appendix A must be finalized in an accurate and timely manner because it serves as the base reference document for WSRC and other involved stakeholders such as the cask owners and the competent authorities throughout the approval process. With the approval of the Appendix A, criticality safety reviews are initiated to evaluate the unloading and storage configurations. Operational reviews are conducted to allow for necessary adaptation of fuel handling facilities, procedures, and training. WSRC has proceduralized this process, 'Certification to Receive and

Przemiany stylu edukacyjnego klasy ludowej w Polsce

Directory of Open Access Journals (Sweden)

Przemysław Sadura

2015-12-01

Full Text Available Wprowadzenie gimnazjum – jednego z elementów zmiany systemu edukacyjnego, dostosowującej go do ogólnych parametrów postfordowskiego kapitalizmu – wpłynęło na styl edukacyjny klasy ludowej w Polsce. Zmiany zachodzące w systemie od reformy w 1999 r., dotyczące ekonomizacji edukacji, parametryzacji i kwantyfikacji wyników edukacyjnych oraz wprowadzenia elementów gry rynkowej do zarządzania i finansowania szkół publicznych, przypominają procesy zachodzące od lat 80. XX w. w krajach zachodnich. Ich wpływ na styl życia klasy ludowej w Polsce wywołuje konsekwencje wynikające z lokalnej specyfiki. Artykuł opiera się na analizie 120 wywiadów pogłębionych przeprowadzonych w latach 2013–2014 z robotnikami, rolnikami i pracownikami fizycznymi w czterech regonach Polski oraz 60 wywiadów z przedstawicielami klasy średniej i wyższej z województwa warmińsko-mazurskiego. Wykazano, że charakterystyka poddanego prawom rynkowym systemu edukacyjnego jest najlepiej dostosowana do kultury klasy średniej, w związku z czym dzieci z rodzin o niższej pozycji społecznej mogą mieć trudności z funkcjonowaniem w takim systemie. Ustalenie to staje się podstawą do formułowania nowych propozycji teoretycznych i badawczych w obszarze badań edukacyjnych.

Linac pre-injector

CERN Multimedia

CERN PhotoLab

1965-01-01

New accelerating column of the linac pre-injector, supporting frame and pumping system. This new system uses two mercury diffusion pumps (in the centre) and forms part of the modifications intended to increase the intensity of the linac. View taken during assembly in the workshop.

Modeling the vacuolar storage of malate shed lights on pre- and post-harvest fruit acidity.