[Quality management (TQM) in public health-care (PHC): principles for cost-performance calculations and cost reductions with better quality].

Science.gov (United States)

Bergholz, W

2008-11-01

In many high-tech industries, quality management (QM) has enabled improvements of quality by a factor of 100 or more, in combination with significant cost reductions. Compared to this, the application of QM methods in health care is in its initial stages. It is anticipated that stringent process management, embedded in an effective QM system will lead to significant improvements in health care in general and in the German public health service in particular. Process management is an ideal platform for controlling in the health care sector, and it will significantly improve the leverage of controlling to bring down costs. Best practice sharing in industry has led to quantum leap improvements. Process management will enable best practice sharing also in the public health service, in spite of the highly diverse portfolio of services that the public health service offers in different German regions. Finally, it is emphasised that "technical" QM, e.g., on the basis of the ISO 9001 standard is not sufficient to reach excellence. It is necessary to integrate soft factors, such as patient or employee satisfaction, and leadership quality into the system. The EFQM model for excellence can serve as proven tool to reach this goal.

How Expensive Is Expensive Enough? Opportunities for Cost Reductions in Offshore Wind Energy Logistics

Directory of Open Access Journals (Sweden)

Thomas Poulsen

2016-06-01

Full Text Available This paper reveals that logistics may conservatively amount to 18% of the levelized cost of energy for offshore wind farms. This is the key finding from an extensive case study carried out within the organization of the world’s leading offshore wind farm developer and operator. The case study aimed to, and produced, a number of possible opportunities for offshore wind cost reductions through logistics innovation; however, within the case study company, no company-wide logistics organization existed to focus horizontally on reducing logistics costs in general. Logistics was not well defined within the case study company, and a logistics strategy did not exist. With full life-cycle costs of offshore wind farms still high enough to present a political challenge within the European Union in terms of legislation to ensure offshore wind diffusion beyond 2020, our research presents logistics as a next frontier for offshore wind constituencies. This important area of the supply chain is ripe to academically and professionally cultivate and harvest in terms of offshore wind energy cost reductions. Our paper suggests that a focused organizational approach for logistics both horizontally and vertically within the company organizations could be the way forward, coupled with a long-term legislative environment to enable the necessary investments in logistics assets and transport equipment.

Multiple cost criteria for occupational dose reduction

International Nuclear Information System (INIS)

James, J.Z.

1983-01-01

This paper describes a simple, feasible procedure for deciding if a proposed dose reduction measure is justified under ALARA, based on engineering economic principles of project feasibility analysis. Particular attention is given to the fixing of cost criteria: the importance of melding disparate objectives into a single parameter, and the distinction between a cost criterion and a cost consideration. (author)

Further Cost Reduction of Battery Manufacturing

Directory of Open Access Journals (Sweden)

Amir A. Asif

2017-06-01

Full Text Available The demand for batteries for energy storage is growing with the rapid increase in photovoltaics (PV and wind energy installation as well as electric vehicle (EV, hybrid electric vehicle (HEV and plug-in hybrid electric vehicle (PHEV. Electrochemical batteries have emerged as the preferred choice for most of the consumer product applications. Cost reduction of batteries will accelerate the growth in all of these sectors. Lithium-ion (Li-ion and solid-state batteries are showing promise through their downward price and upward performance trends. We may achieve further performance improvement and cost reduction for Li-ion and solid-state batteries through reduction of the variation in physical and electrical properties. These properties can be improved and made uniform by considering the electrical model of batteries and adopting novel manufacturing approaches. Using quantum-photo effect, the incorporation of ultra-violet (UV assisted photo-thermal processing can reduce metal surface roughness. Using in-situ measurements, advanced process control (APC can help ensure uniformity among the constituent electrochemical cells. Industrial internet of things (IIoT can streamline the production flow. In this article, we have examined the issue of electrochemical battery manufacturing of Li-ion and solid-state type from cell-level to battery-level process variability, and proposed potential areas where improvements in the manufacturing process can be made. By incorporating these practices in the manufacturing process we expect reduced cost of energy management system, improved reliability and yield gain with the net saving of manufacturing cost being at least 20%.

Implementation of activity-based costing (ABC) to drive cost reduction efforts in a semiconductor manufacturing operation

Science.gov (United States)

Naguib, Hussein; Bol, Igor I.; Lora, J.; Chowdhry, R.

1994-09-01

This paper presents a case study on the implementation of ABC to calculate the cost per wafer and to drive cost reduction efforts for a new IC product line. The cost reduction activities were conducted through the efforts of 11 cross-functional teams which included members of the finance, purchasing, technology development, process engineering, equipment engineering, production control, and facility groups. The activities of these cross functional teams were coordinated by a cost council. It will be shown that these activities have resulted in a 57% reduction in the wafer manufacturing cost of the new product line. Factors contributed to successful implementation of an ABC management system are discussed.

Final cost reduction study for the Geysers Recharge Alternative. Volume 1

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-11-01

The purpose of this study is to determine whether or not cost reduction opportunities exist for the Geysers Recharge Alternative as defined in the Santa Rosa Subregional Long-Term Wastewater Project EIR/EIS. The City of Santa Rosa has been directed to have a plan for reclaimed water disposal in place by 1999 which will meet future capacity needs under all weather conditions. A Draft EIR/EIS released in July 1996 and a Final EIR certified in June 1997 examine four primary alternatives plus the No Action Alternative. Two of the primary alternatives involve agricultural irrigation with reclaimed water, either in western or southern Sonoma County. Another involves increased discharge of reclaimed water into the Russian River. The fourth involves using reclaimed water to replenish the geothermal reservoir at the Geysers. The addition of this water source would enable the Geysers operators to produce more steam from the geothermal area and thereby prolong the life and economic production level of the steamfield and the geothermal power plants supplied by the steamfield. This study provides additional refined cost estimates for new scenarios which utilize an alternative pipeline alignment and a range of reclaimed water flows, which deliver less water to the Geysers than proposed in the EIR/EIS (by distributing flow to other project components). Also, electrical power rates were revised to reflect the recent changes in costs associated with deregulation of the power industry. In addition, this report provides information on sources of potential public and private funding available and future environmental documentation required if the cost reduction scenarios were to be selected by the City as part of their preferred alternative.

Cost-effectiveness of reduction of off-site dose

International Nuclear Information System (INIS)

McGrath, J.J.; Macphee, R.; Arbeau, N.; Miskin, J.; Scott, C.K.; Winters, E.

1988-03-01

Since the early 1970's, nuclear power plants have been designed and operated with a target of not releasing more than one percent of the licensed limits (derived emission limits) in liquid and gaseous effluents. The AECB initiated this study of the cost-effectiveness of the reduction of off-site doses as part of a review to determine if further measures to reduce off-site doses might be reasonably achievable. Atlantic Nuclear has estimated the cost of existing technology options that can be applied for a further reduction of radioactive effluents from future CANDU nuclear power plants. Detritiation, filtration, ion exchange and evaporation are included in the assessment. The costs are presented in 1987 Canadian dollars, and include capital and operating costs for a reference 50 year plant life. Darlington NGS and Point Lepreau NGS are the reference nuclear power plant types and locations. The effect resulting from the hypothetical application of each technology has been calculated as the resulting reduction in world collective radiation dose detriment. The CSA N288.1 procedure was used for local pathway analysis and the global dispersion model developed by the NEA (OECD) group of experts was used for dose calculations. The reduction in the 'collective effective dose equivalent commitment' was assumed to exist for 10,000 years, the expected life-span of solid waste repositories. No attempt was made to model world population dynamics. The collective dose reductions were calculated for a nominal world population of 10 billion persons. The estimated cost and effect of applying the technology options are summarized in a tabular form for input to further consideration of 'reasonably achievable off-site dose levels'

A systematic way for the cost reduction of density fitting methods

International Nuclear Information System (INIS)

Kállay, Mihály

2014-01-01

We present a simple approach for the reduction of the size of auxiliary basis sets used in methods exploiting the density fitting (resolution of identity) approximation for electron repulsion integrals. Starting out of the singular value decomposition of three-center two-electron integrals, new auxiliary functions are constructed as linear combinations of the original fitting functions. The new functions, which we term natural auxiliary functions (NAFs), are analogous to the natural orbitals widely used for the cost reduction of correlation methods. The use of the NAF basis enables the systematic truncation of the fitting basis, and thereby potentially the reduction of the computational expenses of the methods, though the scaling with the system size is not altered. The performance of the new approach has been tested for several quantum chemical methods. It is demonstrated that the most pronounced gain in computational efficiency can be expected for iterative models which scale quadratically with the size of the fitting basis set, such as the direct random phase approximation. The approach also has the promise of accelerating local correlation methods, for which the processing of three-center Coulomb integrals is a bottleneck

The ENABLER---based on proven NERVA technology

International Nuclear Information System (INIS)

Livingston, J.M.; Pierce, B.L.

1991-01-01

The ENABLER reactor for use in a nuclear thermal propulsion engine uses the technology developed in the NERVA/Rover program, updated to incorporate advances in the technology. Using composite fuel, higher power densities per fuel element, improved radiation resistant control components and the advancements in use of carbon-carbon materials; the ENABLER can provide a specific impulse of 925 seconds, an engine thrust to weight (excluding reactor shield) approaching five, an improved initial Mass In Low Earth Orbit (IMLEO) and a consequent reduction in launch costs and logistics problems. This paper describes the 75,000 lbs thrust ENABLER design which is a low cost, low risk approach to meeting tomorrow's space propulsion needs

The ENABLER - Based on proven NERVA technology

International Nuclear Information System (INIS)

Livingston, J.M.; Pierce, B.L.

1991-01-01

The ENABLER reactor for use in a nuclear thermal propulsion engine uses the technology developed in the NERVA/Rover program, updated to incorporate advances in the technology. Using composite fuel, higher power densities per fuel element, improved radiation resistant control components and the advancements in use of carbon-carbon materials; the ENABLER can provide a specific impulse of 925 seconds, an engine thrust to weight (excluding reactor shield) approaching five, an improved initial mass in low Earth orbit and a consequent reduction in launch costs and logistics problems. This paper describes the 75,000 lbs thrust ENABLER design which is a low cost, low risk approach to meeting tommorrow's space propulsion needs

The ENABLER - Based on proven NERVA technology

Science.gov (United States)

Livingston, Julie M.; Pierce, Bill L.

The ENABLER reactor for use in a nuclear thermal propulsion engine uses the technology developed in the NERVA/Rover program, updated to incorporate advances in the technology. Using composite fuel, higher power densities per fuel element, improved radiation resistant control components and the advancements in use of carbon-carbon materials; the ENABLER can provide a specific impulse of 925 seconds, an engine thrust to weight (excluding reactor shield) approaching five, an improved initial mass in low Earth orbit and a consequent reduction in launch costs and logistics problems. This paper describes the 75,000 lbs thrust ENABLER design which is a low cost, low risk approach to meeting tommorrow's space propulsion needs.

Cost-Reduction Roadmap for Residential Solar Photovoltaics (PV), 2017-2030

Energy Technology Data Exchange (ETDEWEB)

Cook, Jeffrey J. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Ardani, Kristen B. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Margolis, Robert M. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Fu, Ran [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2018-01-03

The installed cost of solar photovoltaics (PV) has fallen rapidly in recent years and is expected to continue declining in the future. In this report, we focus on the potential for continued PV cost reductions in the residential market. From 2010 to 2017, the levelized cost of energy (LCOE) for residential PV declined from 52 cents per kilowatt-hour (cents/kWh) to 16 cents/kWh (Fu et al. 2017). The U.S. Department of Energy's (DOE's) Solar Energy Technologies Office (SETO) recently set new LCOE targets for 2030, including a target of 5 cents/kWh for residential PV. We present a roadmap for achieving the SETO 2030 residential PV target. Because the 2030 target likely will not be achieved under business-as-usual trends (NREL 2017), we examine two key market segments that demonstrate significant opportunities for cost savings and market growth: installing PV at the time of roof replacement and installing PV as part of the new home construction process. Within both market segments, we identify four key cost-reduction opportunities: market maturation, business model integration, product innovation, and economies of scale. To assess the potential impact of these cost reductions, we compare modeled residential PV system prices in 2030 to the National Renewable Energy Laboratory's (NREL's) quarter one 2017 (Q1 2017) residential PV system price benchmark (Fu et al. 2017). We use a bottom-up accounting framework to model all component and project-development costs incurred when installing a PV system. The result is a granular accounting for 11 direct and indirect costs associated with installing a residential PV system in 2030. All four modeled pathways demonstrate significant installed-system price savings over the Q1 2017 benchmark, with the visionary pathways yielding the greatest price benefits. The largest modeled cost savings are in the supply chain, sales and marketing, overhead, and installation labor cost categories. When we translate these

A capital cost reduction study on the fast breeder reactor plant

International Nuclear Information System (INIS)

Taniyama, H.; Kamei, M.; Moriyama, M.

1991-01-01

A capital cost reduction study has been performed for large fast breeder reactor designs. The primary objective of this study is to show a trend of capital cost reduction between FBR plants at the prototype stage, the demonstration stage, and the future commercialization stage. For the FBR plant at the demonstration stage a construction cost comparison with a light water reactor has also been performed, and the target cost of FBR of below 1.5 times that of the light water reactor cost was achieved. To extend the capital cost reduction study, a feasibility study was made to achieve a capital cost of an FBR less than that of a light water reactor. The recommended design is shown as a future commercialization FBR design concept. (author)

Reduction of mesqa improvement costs

Directory of Open Access Journals (Sweden)

Mohamed Ahmed Saad ElFetyany

2017-10-01

Results show that using the revised approach brings down the cost of mesqa improvement from nearly 10,000LE/fed at present to about 6000LE/fed. These reductions based on the analyses of different mesqa modelling through the adoption of certain parameters such as feasibility of the revised design, effective application of continuous flow for water distribution, and downsizing of the capacity of improved mesqas.

Cost-effective reduction of fine primary particulate matter emissions in Finland

International Nuclear Information System (INIS)

Karvosenoja, Niko; Klimont, Zbigniew; Tohka, Antti; Johansson, Matti

2007-01-01

Policies to reduce adverse health impacts of fine particulate matter (PM 2.5 ) require information on costs of abatement and associated costs. This paper explores the potential for cost-efficient control of anthropogenic primary PM 2.5 emissions in Finland. Based on a Kyoto-compliant energy projection, two emission control scenarios for 2020 were developed. 'Baseline' assumes implementation of PM controls in compliance with existing legislation. 'Reduction' assumes ambitious further reductions. Emissions for 2020 were estimated at 26 and 18.6 Gg a -1 for 'Baseline' and 'Reduction', respectively. The largest abatement potential, 3.0 Gg a -1 , was calculated for power plants and industrial combustion. The largest potential with marginal costs below 5000 Euro MG(PM 2.5 ) -1 was for domestic wood combustion, 1.7 Gg a -1 . For traffic the potential was estimated at 1.0 Gg a -1 , but was associated with high costs. The results from this paper are used in the policy-driven national integrated assessment modeling that explores cost-efficient reductions of the health impacts of PM

The ranking of negative-cost emissions reduction measures

International Nuclear Information System (INIS)

Taylor, Simon

2012-01-01

A flaw has been identified in the calculation of the cost-effectiveness in marginal abatement cost curves (MACCs). The problem affects “negative-cost” emissions reduction measures—those that produce a return on investment. The resulting ranking sometimes favours measures that produce low emissions savings and is therefore unreliable. The issue is important because incorrect ranking means a potential failure to achieve the best-value outcome. A simple mathematical analysis shows that not only is the standard cost-effectiveness calculation inadequate for ranking negative-cost measures, but there is no possible replacement that satisfies reasonable requirements. Furthermore, the concept of negative cost-effectiveness is found to be unsound and its use should be avoided. Among other things, this means that MACCs are unsuitable for ranking negative-cost measures. As a result, MACCs produced by a range of organizations including UK government departments may need to be revised. An alternative partial ranking method has been devised by making use of Pareto optimization. The outcome can be presented as a stacked bar chart that indicates both the preferred ordering and the total emissions saving available for each measure without specifying a cost-effectiveness. - Highlights: ► Marginal abatement cost curves (MACCs) are used to rank emission reduction measures. ► There is a flaw in the standard ranking method for negative-cost measures. ► Negative values of cost-effectiveness (in £/tC or equivalent) are invalid. ► There may be errors in published MACCs. ► A method based on Pareto principles provides an alternative ranking method.

The Role of Logistics in Practical Levelized Cost of Energy Reduction Implementation and Government Sponsored Cost Reduction Studies: Day and Night in Offshore Wind Operations and Maintenance Logistics

DEFF Research Database (Denmark)

Poulsen, Thomas; Hasager, Charlotte Bay; Jensen, Christian Munk

2017-01-01

This paper reveals that logistics make up at least 17% of annual operational expenditure costs for offshore wind farms. Annual operational expenditure is found to vary by a factor of 9.5, making its share of levelized cost of energy for offshore wind range from 13% to 57%. These are key findings...... contrast to the shore-based office personnel who develop studies directing cost reduction efforts. This paper details the company motivation to join industry-wide cost reduction initiatives. A business case for offshore wind operations and maintenance logistics yielding 1% savings in levelized cost...... of a 20-month research project targeting cost reduction initiatives for offshore wind systems. The findings reveal that cost-out measures are difficult to implement due to cultural differences. Implementation efforts are rendered by personnel located offshore in a harsh sea environment which is in stark...

Marginal CO2 reduction cost in ENERGY 2000 development. A socio-economic evaluation of the marginal cost for the alternative reduction methods

International Nuclear Information System (INIS)

Maeng, H.

1995-01-01

The official Danish environmental plan involves a reduction of CO 2 within the next 30-50 years. This report describes the analysis of socio-economic cost/consequences of marginal CO 2 reduction by means of various technical solution models. Calculations by means of the special program subroutine SAMFOKO are based on energy balance in annual, monthly, daily and hourly scale. Heat and power savings as well as the development of decentralized power plants are considered in the supply model. Socio-economic consequences in form of charges and cost are discussed. (EG)

Mars Relay Satellite: Key to Enabling Low-Cost Exploration Missions

Science.gov (United States)

Hastrup, R.; Cesarone, R.; Miller, A.

1993-01-01

Recently, there has been increasing evidence of a renewed focus on Mars exploration both by NASA and the international community. The thrust of this renewed interest appears to be manifesting itself in numerous low-cost missions employing small, light weight elements, which utilize advanced technologies including integrated microelectronics. A formidable problem facing these low-cost missions is communications with Earth. Providing adequate direct-link performance has very significant impacts on spacecraft power, pointing, mass and overall complexity. Additionally, for elements at or near the surface of Mars, there are serious connectivity constraints, especially at higher latitudes, which lose view of Earth for up to many months at a time. This paper will discuss the role a Mars relay satellite can play in enabling and enhancing low-cost missions to Mars...

Smart Grid Enabled EVSE

Energy Technology Data Exchange (ETDEWEB)

None, None

2015-01-12

The combined team of GE Global Research, Federal Express, National Renewable Energy Laboratory, and Consolidated Edison has successfully achieved the established goals contained within the Department of Energy’s Smart Grid Capable Electric Vehicle Supply Equipment funding opportunity. The final program product, shown charging two vehicles in Figure 1, reduces by nearly 50% the total installed system cost of the electric vehicle supply equipment (EVSE) as well as enabling a host of new Smart Grid enabled features. These include bi-directional communications, load control, utility message exchange and transaction management information. Using the new charging system, Utilities or energy service providers will now be able to monitor transportation related electrical loads on their distribution networks, send load control commands or preferences to individual systems, and then see measured responses. Installation owners will be able to authorize usage of the stations, monitor operations, and optimally control their electricity consumption. These features and cost reductions have been developed through a total system design solution.

The Role of Logistics in Practical Levelized Cost of Energy Reduction Implementation and Government Sponsored Cost Reduction Studies: Day and Night in Offshore Wind Operations and Maintenance Logistics

Directory of Open Access Journals (Sweden)

Thomas Poulsen

2017-04-01

Full Text Available This paper reveals that logistics make up at least 17% of annual operational expenditure costs for offshore wind farms. Annual operational expenditure is found to vary by a factor of 9.5, making its share of levelized cost of energy for offshore wind range from 13% to 57%. These are key findings of a 20-month research project targeting cost reduction initiatives for offshore wind systems. The findings reveal that cost-out measures are difficult to implement due to cultural differences. Implementation efforts are rendered by personnel located offshore in a harsh sea environment which is in stark contrast to the shore-based office personnel who develop studies directing cost reduction efforts. This paper details the company motivation to join industry-wide cost reduction initiatives. A business case for offshore wind operations and maintenance logistics yielding 1% savings in levelized cost of energy is included on how to expand working hours from daytime to also work at night.

Cost effective snubber reduction program for nuclear power plants

International Nuclear Information System (INIS)

Adams, T.M.; Antaki, G.A.; Chang, K.C.

1985-01-01

Due to the stringent seismic requirements imposed on nuclear power plants, piping engineers have resorted to the extensive use of snubbers to support nuclear piping systems. The advantage of snubbers is that they provide dynamic restraint while allowing free thermal growth of the pipe. Unfortunately, as more plants go into operation, utilities have to face the costs of strict in-service inspection requirements and risks of unscheduled or extended plant outages associated with snubber failures. The snubber inspection requirements, defined in plant Technical Specifications, require periodic visual inspections of all snubbers and functional tests of a percentage of the plant snubbers, during refueling outages. For a typical 1000 Mw unit this represents from 50 to several hundred snubbers to be functionally tested at each refueling outage. Should failures occur during testing, the sample size must be further increased. Very quickly the costs and risks of extended shutdowns have led the industry to consider, and in many cases implement, snubber reduction programs. At the same time several changes in seismic design criteria have greatly facilitated the reduction of snubbers, making snubber elimination economically and technically attractive. In this paper we examine the costs and benefits of snubber reduction programs and propose a method for evaluating their cost benefits

Marginal cost curves for water footprint reduction in irrigated agriculture: a policy and decision making guide for efficient water use in crop production

Science.gov (United States)

Chukalla, Abebe; Krol, Maarten; Hoekstra, Arjen

2016-04-01

Reducing water footprints (WF) in irrigated crop production is an essential element in water management, particularly in water-scarce areas. To achieve this, policy and decision making need to be supported with information on marginal cost curves that rank measures to reduce the WF according to their cost-effectiveness and enable the estimation of the cost associated with a certain WF reduction target, e.g. towards a certain reasonable WF benchmark. This paper aims to develop marginal cost curves (MCC) for WF reduction. The AquaCrop model is used to explore the effect of different measures on evapotranspiration and crop yield and thus WF that is used as input in the MCC. Measures relate to three dimensions of management practices: irrigation techniques (furrow, sprinkler, drip and subsurface drip); irrigation strategies (full and deficit irrigation); and mulching practices (no mulching, organic and synthetic mulching). A WF benchmark per crop is calculated as resulting from the best-available production technology. The marginal cost curve is plotted using the ratios of the marginal cost to WF reduction of the measures as ordinate, ranking with marginal costs rise with the increase of the reduction effort. For each measure, the marginal cost to reduce WF is estimated by comparing the associated WF and net present value (NPV) to the reference case (furrow irrigation, full irrigation, no mulching). The NPV for each measure is based on its capital costs, operation and maintenances costs (O&M) and revenues. A range of cases is considered, including: different crops, soil types and different environments. Key words: marginal cost curve, water footprint benchmark, soil water balance, crop growth, AquaCrop

Least cost planning for CO2-reduction strategies

International Nuclear Information System (INIS)

Seifritz, W.

1990-01-01

A first recommendation for the determination of the minimum costs for a carbon-dioxide reduction strategy is presented. For this, the tabulation of so-called, 'CO 2 -ranking-lists', containing the relationship between the costs of a distinct measure to avoid the emission of certain amount of CO 2 (in dollar/t CO 2 ) versus its potential (in t CO 2 /yr), is indispensable. Some basic aspects of this approach are discussed and a first guess of the costs of some measures to avoid CO 2 -emissions into the atmosphere is presented. (orig.) [de

Development of pollution reduction strategies for Mexico City: Estimating cost and ozone reduction effectiveness

International Nuclear Information System (INIS)

Thayer, G.R.; Hardie, R.W.; Barrera-Roldan, A.

1993-01-01

This reports on the collection and preparation of data (costs and air quality improvement) for the strategic evaluation portion of the Mexico City Air Quality Research Initiative (MARI). Reports written for the Mexico City government by various international organizations were used to identify proposed options along with estimates of cost and emission reductions. Information from appropriate options identified by SCAQMD for Southem California were also used in the analysis. A linear optimization method was used to select a group of options or a strategy to be evaluated by decision analysis. However, the reduction of ozone levels is not a linear function of the reduction of hydrocarbon and NO x emissions. Therefore, a more detailed analysis was required for ozone. An equation for a plane on an isopleth calculated with a trajectory model was obtained using two endpoints that bracket the expected total ozone precursor reductions plus the starting concentrations for hydrocarbons and NO x . The relationship between ozone levels and the hydrocarbon and NO x concentrations was assumed to lie on this plane. This relationship was used in the linear optimization program to select the options comprising a strategy

Biological waste by-production costs in forest management and possibilities for their reduction

Directory of Open Access Journals (Sweden)

Jiří Kadlec

2004-01-01

Full Text Available Biological wastes in forestry were observed from view of their by-production in silvicultural and logging operations. There were identified points where biological waste was produced in this paper, waste costs ratio for silvicultural and logging operations and were made suggestions for reduction of these costs. Biological waste costs give 34.4% of total costs of silvicultural operations and 30% of total costs of logging operations. Natural regeneration and minor forest produce operations are opportunities for reduction of these costs.

A cooperative reduction model for regional air pollution control in China that considers adverse health effects and pollutant reduction costs.

Science.gov (United States)

Xie, Yujing; Zhao, Laijun; Xue, Jian; Hu, Qingmi; Xu, Xiang; Wang, Hongbo

2016-12-15

How to effectively control severe regional air pollution has become a focus of global concern recently. The non-cooperative reduction model (NCRM) is still the main air pollution control pattern in China, but it is both ineffective and costly, because each province must independently fight air pollution. Thus, we proposed a cooperative reduction model (CRM), with the goal of maximizing the reduction in adverse health effects (AHEs) at the lowest cost by encouraging neighboring areas to jointly control air pollution. CRM has two parts: a model of optimal pollutant removal rates using two optimization objectives (maximizing the reduction in AHEs and minimizing pollutant reduction cost) while meeting the regional pollution control targets set by the central government, and a model that allocates the cooperation benefits (i.e., health improvement and cost reduction) among the participants according to their contributions using the Shapley value method. We applied CRM to the case of sulfur dioxide (SO 2 ) reduction in Yangtze River Delta region. Based on data from 2003 to 2013, and using mortality due to respiratory and cardiovascular diseases as the health endpoints, CRM saves 437 more lives than NCRM, amounting to 12.1% of the reduction under NCRM. CRM also reduced costs by US $65.8×10 6 compared with NCRM, which is 5.2% of the total cost of NCRM. Thus, CRM performs significantly better than NCRM. Each province obtains significant benefits from cooperation, which can motivate them to actively cooperate in the long term. A sensitivity analysis was performed to quantify the effects of parameter values on the cooperation benefits. Results shown that the CRM is not sensitive to the changes in each province's pollutant carrying capacity and the minimum pollutant removal capacity, but sensitive to the maximum pollutant reduction capacity. Moreover, higher cooperation benefits will be generated when a province's maximum pollutant reduction capacity increases. Copyright �

New approaches to cost reduction on the UK continental shelf

Energy Technology Data Exchange (ETDEWEB)

Curtis, M I

1994-12-31

The conference paper deals with cost reduction on the UK continental shelf. New approaches on the reduction of field development costs are compared with the cases if traditional approaches had been followed. Field developments where success in aligning the goals and objectives of the contractors and owners which led to projects being delivered on time but more than 20% below budget, are exemplified. The contractors in the alliance received 55% of the savings in addition to their normal profit. The procedure to follow in such cases, is discussed

New approaches to cost reduction on the UK continental shelf

International Nuclear Information System (INIS)

Curtis, M.I.

1994-01-01

The conference paper deals with cost reduction on the UK continental shelf. New approaches on the reduction of field development costs are compared with the cases if traditional approaches had been followed. Field developments where success in aligning the goals and objectives of the contractors and owners which led to projects being delivered on time but more than 20% below budget, are exemplified. The contractors in the alliance received 55% of the savings in addition to their normal profit. The procedure to follow in such cases, is discussed

Sensor fusion to enable next generation low cost Night Vision systems

Science.gov (United States)

Schweiger, R.; Franz, S.; Löhlein, O.; Ritter, W.; Källhammer, J.-E.; Franks, J.; Krekels, T.

2010-04-01

The next generation of automotive Night Vision Enhancement systems offers automatic pedestrian recognition with a performance beyond current Night Vision systems at a lower cost. This will allow high market penetration, covering the luxury as well as compact car segments. Improved performance can be achieved by fusing a Far Infrared (FIR) sensor with a Near Infrared (NIR) sensor. However, fusing with today's FIR systems will be too costly to get a high market penetration. The main cost drivers of the FIR system are its resolution and its sensitivity. Sensor cost is largely determined by sensor die size. Fewer and smaller pixels will reduce die size but also resolution and sensitivity. Sensitivity limits are mainly determined by inclement weather performance. Sensitivity requirements should be matched to the possibilities of low cost FIR optics, especially implications of molding of highly complex optical surfaces. As a FIR sensor specified for fusion can have lower resolution as well as lower sensitivity, fusing FIR and NIR can solve performance and cost problems. To allow compensation of FIR-sensor degradation on the pedestrian detection capabilities, a fusion approach called MultiSensorBoosting is presented that produces a classifier holding highly discriminative sub-pixel features from both sensors at once. The algorithm is applied on data with different resolution and on data obtained from cameras with varying optics to incorporate various sensor sensitivities. As it is not feasible to record representative data with all different sensor configurations, transformation routines on existing high resolution data recorded with high sensitivity cameras are investigated in order to determine the effects of lower resolution and lower sensitivity to the overall detection performance. This paper also gives an overview of the first results showing that a reduction of FIR sensor resolution can be compensated using fusion techniques and a reduction of sensitivity can be

Quantifying the emissions reduction effectiveness and costs of oxygenated gasoline

International Nuclear Information System (INIS)

Lyons, C.E.

1993-01-01

During the fall, winter, and spring of 1991-1992, a measurement program was conducted in Denver, Colorado to quantify the technical and economic effectiveness of oxygenated gasoline in reducing automobile carbon monoxide (CO) emissions. Emissions from 80,000 vehicles under a variety of operating conditions were measured before, during, and after the seasonal introduction of oxygenated gasoline into the region. Gasoline samples were taken from several hundred vehicles to confirm the actual oxygen content of the fuel in use. Vehicle operating conditions, such as cold starts and warm operations, and ambient conditions were characterized. The variations in emissions attributable to fuel type and to operating conditions were then quantified. This paper describes the measurement program and its results. The 1991-1992 Colorado oxygenated gasoline program contributed to a reduction in carbon monoxide (CO) emissions from gasoline-powered vehicles. The measurement program demonstrated that most of the reduction is concentrated in a small percentage of the vehicles that use oxygenated gasoline. The remainder experience little or not reduction in emissions. The oxygenated gasoline program outlays are approximately $25 to $30 million per year in Colorado. These are directly measurable costs, incurred through increased government expenditures, higher costs to private industry, and losses in fuel economy. The measurement program determined the total costs of oxygenated gasoline as an air pollution control strategy for the region. Costs measured included government administration and enforcement, industry production and distribution, and consumer and other user costs. This paper describes the ability of the oxygenated gasoline program to reduce pollution; the overall cost of the program to government, industry, and consumers; and the effectiveness of the program in reducing pollution compared to its costs

Engineering IT-enabled sustainable electricity services the tale of two low-cost green Azores Islands

CERN Document Server

Xie, Le; Liu, Qixing

2013-01-01

Engineering IT-Enabled Electricity Services: The Tale of Two Low-Cost Green Azores Islands covers sustainable energy services to customers - a balanced choice and coordination of energy generated by traditional and alternative sources. The “Green Islands” project represents a decade of work by over a dozen researchers who have developed a model designed to utilize the potential of distributed clean resources. The key is the proper use of Information Technology (IT).  Sited on two islands in the Azores, the project developed the model of careful forecasting of demand and supply, down to the minute, coordinating the output of conventional power plants, wind energy, fly wheels, hydroelectricity, demand reduction, and even plug-in electric vehicles to take full advantage of the clean resources available. This contributed volume presents methods for predicting variable resources, such as wind power generation, and analyzes the achievable accuracy of these predictions. Throughout this book, contributors sho...

Plant evaluation activities and O and M cost reduction in U.S

International Nuclear Information System (INIS)

Itoh, Takeshi

1998-01-01

Although some nuclear power plants face the possibility of premature retirement, most nuclear power plants have achieved substantial reductions in costs, mainly in O and M costs, and appear to be competitive with new gas and coal fired power plants. Improving competitiveness of existing nuclear power plants in the United States has primarily been driven by the electric utility self assessment activities. However, the background of this activity has been provided by the activities of NRC, INPO, NEI, EUCG and other activities being conducted for improvement of the nuclear power industry as a whole. Utility companies that are in the forefront of this activity have already achieved the reductions in staffing and outage time that are generally known to be effective for reducing O and M costs and are moving forward with rationalization and cost reductions in other areas. However, these electric utility companies are also achieving high safety and reliability. The staff of these electric utility companies have a high degree of autonomy, self motivation and self critical attitude and the staffing of these companies is a numerically small elite. This culture is supported by the self evaluation activity established by each company and is nurtured and supported by the management system. This appears to be one of the major elements in cost reduction. As this is based on U.S. information, differences in the system, society and culture in other nations mean that these findings may not be directly applicable. However, from the point of view of the prospects of nuclear power, these findings have an important meaning. This meaning is that the achievements in the United States of cost reduction activities centering on O and M costs are an important experience for other countries including Japan in reestablishing the economic competitiveness of nuclear power. (author)

Coupling of CORINAIR Data to Cost-effective Emission Reduction Strategies Based on Critical Thresholds

International Nuclear Information System (INIS)

Johansson, M.; Guardans, R.; Lindstrom, M.

1999-12-01

This report summarizes the results of a workshop held by the participants in the EU/LIFE project: Coupling of CORINAIR data to cost-effective emission reduction strategies based on critical thresholds. The project participants include FEI, Filand, NERI, Denmark, CIEMAT, Spain, Lund Univ. Sweden. EMEP/MSC-W, UN/ECE/WGE/CCE and IIASA. The main objective of the project is to support national activities in assessing the spatial and temporal details of emissions of sulphur, nitrogen oxides, ammonium and volatile organic compounds and the impacts of acidification, eutrophication and ground level ozone. The reproject workshop enabled participants to report preliminary results of the two main tasks, emissions and impacts and to agree on common solutions for the final results. (Author) 11 refs

UMTRA Project-Level Cost Reduction/Productivity Improvement Program manual

International Nuclear Information System (INIS)

1995-06-01

Mission of the Uranium Mill Tailings Remedial Action (UMTRA) Project Cost Reduction/Productivity Improvement Program (CR/PIP) is to contribute to the UMTRA Project's environmental restoration mission by providing the means to achieve and recognize continuous improvements and cost savings. This manual includes program definition, description of UMTRA project organizational responsibilities and interfaces with existing project functions, guidance to contractors, and definition of project-level functions

Solar cost reduction through technical improvements: the concepts of learning and experience

Energy Technology Data Exchange (ETDEWEB)

Krawiec, F.; Flaim, T.

1979-10-01

The concepts of learning and experience are reviewed and their usefulness for predicting the future costs of solar technologies are evaluated. The literature review indicated that the cost estimates for solar energy technologies are typically made assuming a fixed production process, characterized by standard capacity factors, overhead, and labor costs. The learning curve is suggested as a generalization of the costs of potential solar energy systems. The concept of experience is too ambiguous to be useful for cost estimation. There is no logical reason to believe that costs will decline purely as a function of cumulative production, and experience curves do not allow the analyst to identify logical sources of cost reduction directly. The procedures for using learning and aggregated cost curves to estimate the costs of solar technologies are outlined. It is recommended that production histories of analogous products and processes are analyzed and the learning and cost curves for these surrogates are estimated. These curves, if judged applicable, can be used to predict the cost reductions in manufacturing solar energy technologies.

Endovascular aneurysm repair delivery redesign leads to quality improvement and cost reduction.

Science.gov (United States)

Warner, Courtney J; Horvath, Alexander J; Powell, Richard J; Columbo, Jesse A; Walsh, Teri R; Goodney, Philip P; Walsh, Daniel B; Stone, David H

2015-08-01

Endovascular aneurysm repair (EVAR) is now a mainstay of therapy for abdominal aortic aneurysm, although it remains associated with significant expense. We performed a comprehensive analysis of EVAR delivery at an academic medical center to identify targets for quality improvement and cost reduction in light of impending health care reform. All infrarenal EVARs performed from April 2011 to March 2012 were identified (N = 127). Procedures were included if they met standard commercial instructions for use guidelines, used a single manufacturer, and were billed to Medicare diagnosis-related group 238 (n = 49). By use of DMAIC (define, measure, analyze, improve, and control) quality improvement methodology (define, measure, analyze, improve, control), targets for EVAR quality improvement were identified and high-yield changes were implemented. Procedure technical costs were calculated before and after process redesign. Perioperative services and clinic visits were identified as targets for quality improvement efforts and cost reduction. Mean technical costs before the intervention were $31,672, with endograft implants accounting for 52%. Pricing redesign in collaboration with hospital purchasing reduced mean EVAR technical costs to $28,607, a 10% reduction in overall cost, with endograft implants now accounting for 46%. Perioperative implementation of instrument tray redesign reduced instrument use by 32% (184 vs 132 instruments), saving $50,000 annually. Unnecessary clinic visits were reduced by 39% (1.6 vs 1.1 clinic visits per patient) through implementation of a preclinic imaging protocol. There was no difference in mean length of stay after the intervention. Comprehensive EVAR delivery redesign leads to cost reduction and waste elimination while preserving quality. Future efforts to achieve more competitive and transparent device pricing will make EVAR more cost neutral and enhance its financial sustainability for health care systems. Copyright © 2015 Society for

A Model of Cost Reduction and Standardization: Improved Cost Savings While Maintaining the Quality of Care.

Science.gov (United States)

Guzman, Michael J; Gitelis, Matthew E; Linn, John G; Ujiki, Michael B; Waskerwitz, Matthew; Umanskiy, Konstantin; Muldoon, Joseph P

2015-11-01

Surgeon instrument choices are influenced by training, previous experience, and established preferences. This causes variability in the cost of common operations, such as laparoscopic appendectomy. Many surgeons are unaware of the impact that this has on healthcare spending. We sought to educate surgeons on their instrument use and develop standardized strategies for operating room cost reduction. We collected the individual surgeon instrument cost for performing a laparoscopic appendectomy. Sixteen surgeons were educated about these costs and provided with cost-effective instruments and techniques. This study was conducted in a university-affiliated hospital system. Patients included those undergoing a laparoscopic appendectomy within the hospital system. Patient demographics, operating room costs, and short-term outcomes for the fiscal year before and after the education program were then compared. During fiscal year 2013, a total of 336 laparoscopic appendectomies were performed compared with 357 in 2014. Twelve surgeons had a ≥5% reduction in average cost per case. Overall, the average cost per case was reduced by 17% (p day readmissions, postoperative infections, operating time, or reoperations. This retrospective study is subject to the accuracy of the medical chart system. In addition, specific instrument costs are based on our institution contracts and vary compared with other institutions. In this study we demonstrate that operative instrument costs for laparoscopic appendectomy can be significantly reduced by informing the surgeons of their operating room costs compared with their peers and providing a low-cost standardized instrument tray. Importantly, this can be realized without any incentive or punitive measures and does not negatively impact outcomes. Additional work is needed to expand these results to more operations, hospital systems, and training programs.

Cost effective reductions in the agricultural load of nitrogen to the Baltic Sea

Energy Technology Data Exchange (ETDEWEB)

Elofsson, K.

1997-11-01

To restore the health of the Baltic Sea, the Helsinki Commission, HELCOM, suggests that the nitrogen load should be reduced by 50%. The agricultural sector accounts for about 1/3 of the total load of nitrogen to the Baltic Sea, while point sources account for about 1/4. The remaining load reaches the Baltic as atmospheric deposition. The purpose of this study is to calculate cost effective reductions in the agricultural load of nitrogen to the Baltic Sea coastal waters. The Baltic Sea drainage basin is divided into 17 regions, which differ with respect to costs, leaching and nitrogen retention. For each region, cost functions are estimated for 11 nitrogen abatement measures in the agricultural sector. It is difficult to find reliable data on both costs and biological parameters for all regions included, and several assumptions are made to obtain the cost functions. In this paper the total cost of a 50% reduction of the nitrogen load from arable land is estimated to 11,700 million SEK per year. A decrease in the use of fertilizer nitrogen is the most important measure in a cost effective policy. Other measures included in the cost effective solution are changes in land-use and in manure management practices. If, instead, each country is required to reduce its load by 50%, the total cost will increase by nearly 60%. Three out of nine countries around the Baltic Sea would gain from separate reduction targets, while all others lose by such a policy. The results are sensitive to assumptions about the biological parameters and the shape of the cost functions for reductions in chemical fertilizer. 75 refs, 3 figs, 11 tabs

Cost reduction in deep water production systems

International Nuclear Information System (INIS)

Beltrao, R.L.C.

1995-01-01

This paper describes a cost reduction program that Petrobras has conceived for its deep water field. Beginning with the Floating Production Unit, a new concept of FPSO was established where a simple system, designed to long term testing, can be upgraded, on the location, to be the definitive production unit. Regarding to the subsea system, the following projects will be considered. (1) Subsea Manifold: There are two 8-well-diverless manifolds designed for 1,000 meters presently under construction and after a value analysis, a new design was achieved for the next generation. Both projects will be discussed and a cost evaluation will also be provided. (2) Subsea Pipelines: Petrobras has just started a large program aiming to reduce cost on this important item. There are several projects such as hybrid (flexible and rigid) pipes for large diameter in deep water, alternatives laying methods, rigid riser on FPS, new material...etc. The authors intend to provide an overview of each project

Cost reductions of fuel cells for transport applications: fuel processing options

Energy Technology Data Exchange (ETDEWEB)

Teagan, W P; Bentley, J; Barnett, B [Arthur D. Little, Inc., Cambridge, MA (United States)

1998-03-15

The highly favorable efficiency/environmental characteristics of fuel cell technologies have now been verified by virtue of recent and ongoing field experience. The key issue regarding the timing and extent of fuel cell commercialization is the ability to reduce costs to acceptable levels in both stationary and transport applications. It is increasingly recognized that the fuel processing subsystem can have a major impact on overall system costs, particularly as ongoing R and D efforts result in reduction of the basic cost structure of stacks which currently dominate system costs. The fuel processing subsystem for polymer electrolyte membrane fuel cell (PEMFC) technology, which is the focus of transport applications, includes the reformer, shift reactors, and means for CO reduction. In addition to low cost, transport applications require a fuel processor that is compact and can start rapidly. This paper describes the impact of factors such as fuel choice operating temperature, material selection, catalyst requirements, and controls on the cost of fuel processing systems. There are fuel processor technology paths which manufacturing cost analyses indicate are consistent with fuel processor subsystem costs of under $150/kW in stationary applications and $30/kW in transport applications. As such, the costs of mature fuel processing subsystem technologies should be consistent with their use in commercially viable fuel cell systems in both application categories. (orig.)

Introduction to cost-effectiveness analysis of risk reduction measures in energy systems

International Nuclear Information System (INIS)

1986-07-01

The aim of this report is to introduce readers to methods of cost-effectiveness analysis and their application in risk reduction, especially in connection with the energy-producing industries. The background to the assessment of risk and the problems in estimating it quantitatively are outlined. The methodology of cost-effectiveness analysis is then described, particular attention being given to the way in which results are derived and the overall use that can be made of them. This is followed by a discussion of quantitative applications and an outline of the methods that may be used to derive estimates both of risk and the cost of reducing it. The use of cost-effectiveness analysis is illustrated in an appendix, which gives as a worked example a case study on the reduction of public risk associated with radioactive releases during normal operation of a PWR. After drawing some general conclusions the report recommends that such analyses should normally be used as an aid to risk management whenever several alternative risk reduction measures are under consideration

Cost-Optimal Pathways to 75% Fuel Reduction in Remote Alaskan Villages: Preprint

Energy Technology Data Exchange (ETDEWEB)

Simpkins, Travis; Cutler, Dylan; Hirsch, Brian; Olis, Dan; Anderson, Kate

2015-10-28

There are thousands of isolated, diesel-powered microgrids that deliver energy to remote communities around the world at very high energy costs. The Remote Communities Renewable Energy program aims to help these communities reduce their fuel consumption and lower their energy costs through the use of high penetration renewable energy. As part of this program, the REopt modeling platform for energy system integration and optimization was used to analyze cost-optimal pathways toward achieving a combined 75% reduction in diesel fuel and fuel oil consumption in a select Alaskan village. In addition to the existing diesel generator and fuel oil heating technologies, the model was able to select from among wind, battery storage, and dispatchable electric heaters to meet the electrical and thermal loads. The model results indicate that while 75% fuel reduction appears to be technically feasible it may not be economically viable at this time. When the fuel reduction target was relaxed, the results indicate that by installing high-penetration renewable energy, the community could lower their energy costs by 21% while still reducing their fuel consumption by 54%.

Flying Lessons: Learning from Ryanair's Cost Reduction Culture

Science.gov (United States)

Lawton, Thomas C.

2000-01-01

Through radically improving the value equation for airline customers, Ryanair has served to shake-up established norms and practices in European aviation. Underpinning its price leadership and market success is a vigorous and relentless cost reduction ethos and resultant low break-even load factor. Ryanair has lowered European airline cost structures considerably, shattering existing cost floors. Few competitors are able to follow, either because they do not know how or they are unable due to social settlement obligations or service commitments. At the same time, the company has maintained high average load factors on its flights. Taken in conjunction with its low break-even load factor, this results in consistently high overall profit margins. On this basis, Ryanair is likely to remain a significant competitor and increase its market presence and success across Europe.

Technology learning for fuel cells. An assessment of past and potential cost reductions

International Nuclear Information System (INIS)

Schoots, K.; Van der Zwaan, B.C.C.; Kramer, G.J.

2010-01-01

Fuel cells have gained considerable interest as a means to efficiently convert the energy stored in gases like hydrogen and methane into electricity. Further developing fuel cells in order to reach cost, safety and reliability levels at which their widespread use becomes feasible is an essential prerequisite for the potential establishment of a 'hydrogen economy'. A major factor currently obviating the extensive use of fuel cells is their relatively high costs. At present we estimate these at about 1100 EUR(2005)W for an 80 kW fuel cell system but notice that specific costs vary markedly with fuel cell system power capacity. We analyze past fuel cell cost reductions for both individual manufacturers and the global market. We determine learning curves, with fairly high uncertainty ranges, for three different types of fuel cell technology - AFC, PAFC and PEMFC - each manufactured by a different producer. For PEMFC technology we also calculate a global learning curve, characterised by a learning rate of 21% with an error margin of 4%. Given their respective uncertainties, this global learning rate value is in agreement with those we find for different manufacturers. In contrast to some other new energy technologies, R and D still plays a major role in today's fuel cell improvement process and hence probably explains a substantial part of our observed cost reductions. The remaining share of these cost reductions derives from learning-by-doing proper. Since learning-by-doing usually involves a learning rate of typically 20%, the residual value for pure learning we find for fuel cells is relatively low. In an ideal scenario for fuel cell technology we estimate a bottom-line for specific (80 kW system) manufacturing costs of 95 EUR(2005)W. Although learning curves observed in the past constitute no guarantee for sustained cost reductions in the future, when we assume global total learning at the pace calculated here as the only cost reduction mechanism, this ultimate cost

Time-driven activity-based costing to identify opportunities for cost reduction in pediatric appendectomy.

Science.gov (United States)

Yu, Yangyang R; Abbas, Paulette I; Smith, Carolyn M; Carberry, Kathleen E; Ren, Hui; Patel, Binita; Nuchtern, Jed G; Lopez, Monica E

2016-12-01

As reimbursement programs shift to value-based payment models emphasizing quality and efficient healthcare delivery, there exists a need to better understand process management to unearth true costs of patient care. We sought to identify cost-reduction opportunities in simple appendicitis management by applying a time-driven activity-based costing (TDABC) methodology to this high-volume surgical condition. Process maps were created using medical record time stamps. Labor capacity cost rates were calculated using national median physician salaries, weighted nurse-patient ratios, and hospital cost data. Consumable costs for supplies, pharmacy, laboratory, and food were derived from the hospital general ledger. Time-driven activity-based costing resulted in precise per-minute calculation of personnel costs. Highest costs were in the operating room ($747.07), hospital floor ($388.20), and emergency department ($296.21). Major contributors to length of stay were emergency department evaluation (270min), operating room availability (395min), and post-operative monitoring (1128min). The TDABC model led to $1712.16 in personnel costs and $1041.23 in consumable costs for a total appendicitis cost of $2753.39. Inefficiencies in healthcare delivery can be identified through TDABC. Triage-based standing delegation orders, advanced practice providers, and same day discharge protocols are proposed cost-reducing interventions to optimize value-based care for simple appendicitis. II. Copyright © 2016 Elsevier Inc. All rights reserved.

Development of Manufacturing Technology to Accelerate Cost Reduction of Low Concentration and

Energy Technology Data Exchange (ETDEWEB)

Detrick, Adam [The Solaria Corporation, Fremont, CA (United States)

2017-09-27

The purpose of this project was to accelerate deployment of cost-effective US-based manufacturing of Solaria’s unique c-Si module technology. This effort successfully resulted in the development of US-based manufacturing technology to support two highly-differentiated, market leading product platforms. The project was initially predicated on developing Solaria’s low-concentration PV (LCPV) module technology which at the time of the award was uniquely positioned to exceed the SunShot price goal of $0.50/Wp for standard c-Si modules. The Solaria LCPV module is a 2.5x concentrator that leverages proven, high-reliability PV module materials and low silicon cell usage into a technology package that already had the lowest direct material cost and leading Levelized Cost of Electricity (LCOE). With over 25 MW commercially deployed globally, the Solaria module was well positioned to continue to lead in PV module cost reduction. Throughout the term of the contract, market conditions changed dramatically and so to did Solaria’s product offerings to support this. However, the manufacturing technology developed for the LCPV module was successfully leveraged and optimized to support two new and different product platforms. BIPV “PowerVision” and High-efficiency “PowerXT” modules. The primary barrier to enabling high-volume PV module manufacturing in the US is the high manual labor component in certain unique aspects of our manufacturing process. The funding was used to develop unique manufacturing automation which makes the manual labor components of these key processes more efficient and increase throughput. At the core of Solaria’s product offerings are its unique and proprietary techniques for dicing and re-arranging solar cells into modules with highly-differentiated characteristics that address key gaps in the c-Si market. It is these techniques that were successfully evolved and deployed into US-based manufacturing site with SunShot funding. Today, Solaria

Class Size Reduction or Rapid Formative Assessment?: A Comparison of Cost-Effectiveness

Science.gov (United States)

Yeh, Stuart S.

2009-01-01

The cost-effectiveness of class size reduction (CSR) was compared with the cost-effectiveness of rapid formative assessment, a promising alternative for raising student achievement. Drawing upon existing meta-analyses of the effects of student-teacher ratio, evaluations of CSR in Tennessee, California, and Wisconsin, and RAND cost estimates, CSR…

Reduction of CMOS Image Sensor Read Noise to Enable Photon Counting.

Science.gov (United States)

Guidash, Michael; Ma, Jiaju; Vogelsang, Thomas; Endsley, Jay

2016-04-09

Recent activity in photon counting CMOS image sensors (CIS) has been directed to reduction of read noise. Many approaches and methods have been reported. This work is focused on providing sub 1 e(-) read noise by design and operation of the binary and small signal readout of photon counting CIS. Compensation of transfer gate feed-through was used to provide substantially reduced CDS time and source follower (SF) bandwidth. SF read noise was reduced by a factor of 3 with this method. This method can be applied broadly to CIS devices to reduce the read noise for small signals to enable use as a photon counting sensor.

Understanding the reductions in US corn ethanol production costs: An experience curve approach

International Nuclear Information System (INIS)

Hettinga, W.G.; Junginger, H.M.; Dekker, S.C.; Hoogwijk, M.; McAloon, A.J.; Hicks, K.B.

2009-01-01

The US is currently the world's largest ethanol producer. An increasing percentage is used as transportation fuel, but debates continue on its costs competitiveness and energy balance. In this study, technological development of ethanol production and resulting cost reductions are investigated by using the experience curve approach, scrutinizing costs of dry grind ethanol production over the timeframe 1980-2005. Cost reductions are differentiated between feedstock (corn) production and industrial (ethanol) processing. Corn production costs in the US have declined by 62% over 30 years, down to 100$ 2005 /tonne in 2005, while corn production volumes almost doubled since 1975. A progress ratio (PR) of 0.55 is calculated indicating a 45% cost decline over each doubling in cumulative production. Higher corn yields and increasing farm sizes are the most important drivers behind this cost decline. Industrial processing costs of ethanol have declined by 45% since 1983, to below 130$ 2005 /m 3 in 2005 (excluding costs for corn and capital), equivalent to a PR of 0.87. Total ethanol production costs (including capital and net corn costs) have declined approximately 60% from 800$ 2005 /m 3 in the early 1980s, to 300$ 2005 /m 3 in 2005. Higher ethanol yields, lower energy use and the replacement of beverage alcohol-based production technologies have mostly contributed to this substantial cost decline. In addition, the average size of dry grind ethanol plants increased by 235% since 1990. For the future it is estimated that solely due to technological learning, production costs of ethanol may decline 28-44%, though this excludes effects of the current rising corn and fossil fuel costs. It is also concluded that experience curves are a valuable tool to describe both past and potential future cost reductions in US corn-based ethanol production

Redesign of an in-market food processor for manufacturing cost reduction using DFMA methodology

Directory of Open Access Journals (Sweden)

Akshay Harlalka

2016-01-01

Full Text Available Reducing the time and cost involved in the product development is very important to stay competitive in the market. Design for Manufacturing and Assembly (DFMA is a cost-reduction framework for designers to evaluate manufacturing aspects of a product design. A case study on an in-market food processor, this paper aims to demonstrate the significance of DFMA implementation on an Indian consumer product. Even though many DFMA case studies have been published till date, very few have dealt with the Indian consumer durables category. In this paper, various cost-reduction opportunities are identified in the design of a food processor manufactured by a reputed company in India. Using the DFMA study, design ideas are developed with an objective of reducing the overall manufacturing cost of the product. As a result of DFMA implementation, significant improvement in terms of the product’s architecture, assembly time and design efficiency is identified. Overall cost reduction of 0.25 USD (United States Dollar was achieved and an improvement in the Design for Assembly (DFA index from 15.99 to 19.93 is reported. This procedure utilized in this paper can be adopted for any consumer durable products of similar type and design improvements and cost reduction can be achieved.

Coal contract cost reduction through resale of coal

International Nuclear Information System (INIS)

Simon, R.

1990-01-01

The weak coal market of the 1980's has enabled utilities and other users of coal to enjoy stable or falling prices for coal supplies. Falling prices for coal stimulated the renegotiation of numerous coal contracts in recent years, as buyers look to take advantage of lower fuel prices available in the marketplace. This paper examines the use of coal resale transactions as a means of reducing fuel costs, and analyzes the benefits and risks associated with such transactions

Effect of the Enabling Perception of Costing Systems by Managers in the Performance of their Tasks

Directory of Open Access Journals (Sweden)

Guilherme Eduardo de Souza

2017-12-01

Full Text Available The goal of this study is to analyze the effect of the enabling perception of costing systems by managers in the performance of their tasks, mediated by the intensity in of use of these costing systems and the level of psychological empowerment. The research was carried out through a survey of 62 companies listed in the Perfil das Empresas com Projetos Aprovados ou em Implantação na Zona Franca de Manaus Profile of Companies, in 2014. With a view to analyzing the hypotheses replicated from Mahama’s and Cheng’s (2013 study, the Structural Equations Modeling technique wasused. The research results show that the managers’ enabling perception of costing systems does not affect their  intensity of use, but it impacts on psychological empowerment, and this is directly reflected in the performance of tasks, indicating that the greater the empowerment, the better manager performance will be. It isconcluded that the model partially supports the relationships delineated and that the antecedents related to the costing systems require further study.

A supply chain cost reduction framework for the South African mobile phone industry

Directory of Open Access Journals (Sweden)

Musenga F. Mpwanya

2017-03-01

Aim: The purpose of this study is to explore supply chain costs in the South African mobile phone industry, and to develop a supply chain cost-reduction framework for the South African mobile phone industry. Setting: This study explores supply chain costs in four mobile phone companies operating in the South African mobile phone industry, of which three mobile network operators and one mobile retailing group. It uses semi-structured interview data collected in 2011. Method: This study adopted a qualitative case study design to understand supply chain costs and develop a supply chain cost-reduction framework for the South African mobile phone industry. Eight semi-structured interviews with managers of mobile phone companies were conducted. The data were analysed with the help of Atlas.ti, using an adapted three-phased analytical framework as suggested by Miles and Huberman (1994 and O’ Dwyer (2004. Results: The study found that consolidation of strategic relationships through collaboration and strategic alliances between MNOs and other supply chain players is one of the ways to drive costs down across the supply chain. Outsourcing of some of the support activities and retailers’ direct purchasing transactions from device manufacturers were also found to be other avenues for reducing supply chain costs in the industry. Conclusion: The study suggests that mobile network operators (MNOs need to consolidate their strategic relationships by increasing the share of the network infrastructure, and emphasising the need to strive for operational efficiencies. This combined effort should result in significant cost reductions across the supply chain. The findings of this study provided some avenues that managers of mobile-phone companies could consider to drive costs down supply chain-wide and service end-users at lower rates. The findings of this study could also help regulating authorities to get insights into supply chain cost reduction and develop appropriate

Technological cost-reduction pathways for attenuator wave energy converters in the marine hydrokinetic environment.

Energy Technology Data Exchange (ETDEWEB)

Bull, Diana L; Ochs, Margaret Ellen

2013-09-01

This report considers and prioritizes the primary potential technical costreduction pathways for offshore wave activated body attenuators designed for ocean resources. This report focuses on technical research and development costreduction pathways related to the device technology rather than environmental monitoring or permitting opportunities. Three sources of information were used to understand current cost drivers and develop a prioritized list of potential costreduction pathways: a literature review of technical work related to attenuators, a reference device compiled from literature sources, and a webinar with each of three industry device developers. Data from these information sources were aggregated and prioritized with respect to the potential impact on the lifetime levelized cost of energy, the potential for progress, the potential for success, and the confidence in success. Results indicate the five most promising costreduction pathways include advanced controls, an optimized structural design, improved power conversion, planned maintenance scheduling, and an optimized device profile.

Review comments on Environmental Analysis Cost Reduction Proposals (WIPP-DOE-136), July 1982

International Nuclear Information System (INIS)

Channell, J.K.

1982-11-01

The cost reduction proposals have the laudable goal of significantly reducing the total capital And operating cost connected with WIPP. Furthermore, since the proposed changes would reduce the size and operating rate of the project, they would be expected to have decreased environmental And socioeconomic impacts. However, some of these cost reduction proposals do decrease factors of safety in various components of the project or trade off one type of environmental detriment for another. The report does not contain sufficient detail to justify all of the conclusions reached; more discussion and quantitative information (including costs) is necessary in some cases. Also, there are places where the report is unclear or contradictory. Without a more detailed evaluation, EEG is unable to conclude that each of these cost reduction proposals either has a net environmental/health and safety benefit or a cost savings that justifies a net detriment. A revised Environmental Analysis (EA) should either include additional information or specifically reference backup documents where these conclusions have been justified. In addition, the EA needs to be revised to include the effect of the recently announced (11/18/82) decision by DOE to relocate the underground waste storage areas of the repository to the south

Cost reduction possibilities for a heavy-ion accelerator for inertial confinement fusion

International Nuclear Information System (INIS)

Thayer, G.R.; Sims, J.R.; Henke, M.D.; Harris, D.B.; Dudziak, D.J.; Phillips, N.R.

1987-10-01

A design was produced for a single module in a cost-optimized accelerator appropriate for a commercial heavy-ion power plant. The goal of the study was to determine if the cost of the accelerator module could be reduced through design options, selection of materials, and manufacturing techniques. Independent cost estimates were obtained for the three main components of the module, and cost reductions of 20% from the cost calculated by the heavy-ion accelerator design/cost-minimization computer code LIACEP were identified. 3 refs., 23 figs

Carbon Emission Reduction with Capital Constraint under Greening Financing and Cost Sharing Contract.

Science.gov (United States)

Qin, Juanjuan; Zhao, Yuhui; Xia, Liangjie

2018-04-13

Motivated by the industrial practices, this work explores the carbon emission reductions for the manufacturer, while taking into account the capital constraint and the cap-and-trade regulation. To alleviate the capital constraint, two contracts are analyzed: greening financing and cost sharing. We use the Stackelberg game to model four cases as follows: (1) in Case A1, the manufacturer has no greening financing and no cost sharing; (2) in Case A2, the manufacturer has greening financing, but no cost sharing; (3) in Case B1, the manufacturer has no greening financing but has cost sharing; and, (4) in Case B2, the manufacturer has greening financing and cost sharing. Then, using the backward induction method, we derive and compare the equilibrium decisions and profits of the participants in the four cases. We find that the interest rate of green finance does not always negatively affect the carbon emission reduction of the manufacturer. Meanwhile, the cost sharing from the retailer does not always positively affect the carbon emission reduction of the manufacturer. When the cost sharing is low, both of the participants' profits in Case B1 (under no greening finance) are not less than that in Case B2 (under greening finance). When the cost sharing is high, both of the participants' profits in Case B1 (under no greening finance) are less than that in Case B2 (under greening finance).

Carbon Emission Reduction with Capital Constraint under Greening Financing and Cost Sharing Contract

Science.gov (United States)

Qin, Juanjuan; Zhao, Yuhui; Xia, Liangjie

2018-01-01

Motivated by the industrial practices, this work explores the carbon emission reductions for the manufacturer, while taking into account the capital constraint and the cap-and-trade regulation. To alleviate the capital constraint, two contracts are analyzed: greening financing and cost sharing. We use the Stackelberg game to model four cases as follows: (1) in Case A1, the manufacturer has no greening financing and no cost sharing; (2) in Case A2, the manufacturer has greening financing, but no cost sharing; (3) in Case B1, the manufacturer has no greening financing but has cost sharing; and, (4) in Case B2, the manufacturer has greening financing and cost sharing. Then, using the backward induction method, we derive and compare the equilibrium decisions and profits of the participants in the four cases. We find that the interest rate of green finance does not always negatively affect the carbon emission reduction of the manufacturer. Meanwhile, the cost sharing from the retailer does not always positively affect the carbon emission reduction of the manufacturer. When the cost sharing is low, both of the participants’ profits in Case B1 (under no greening finance) are not less than that in Case B2 (under greening finance). When the cost sharing is high, both of the participants’ profits in Case B1 (under no greening finance) are less than that in Case B2 (under greening finance). PMID:29652859

Reductions in greenhouse gas emissions and cost by shipping at lower speeds

International Nuclear Information System (INIS)

Lindstad, Haakon; Asbjornslett, Bjorn E.; Stromman, Anders H.

2011-01-01

CO 2 emissions from maritime transport represent a significant part of total global greenhouse gas (GHG) emissions. According to the International Maritime Organization (), maritime transport emitted 1046 million tons (all tons are metric) of CO 2 in 2007, representing 3.3% of the world's total CO 2 emissions. The International Maritime Organization (IMO) is currently debating both technical and market-based measures for reducing greenhouse gas emissions from shipping. This paper presents investigations on the effects of speed reductions on the direct emissions and costs of maritime transport, for which the selection of ship classes was made to facilitate an aggregated representation of the world fleet. The results show that there is a substantial potential for reducing CO 2 emissions in shipping. Emissions can be reduced by 19% with a negative abatement cost (cost minimization) and by 28% at a zero abatement cost. Since these emission reductions are based purely on lower speeds, they can in part be performed now. - Highlights: → We investigates the effects of speed reductions for maritime transport. → The selection of ship classes represent the words fleet. → The transport volumes are kept constant. → The model includes both cost and emissions as a function of speed. → The results show that there is a substantial potential for reducing CO 2 emissions from shipping.

Energy cost reduction in oil pipeline

Energy Technology Data Exchange (ETDEWEB)

Limeira, Fabio Machado; Correa, Joao Luiz Lavoura; Costa, Luciano Macedo Josino da; Silva, Jose Luiz da; Henriques, Fausto Metzger Pessanha [Petrobras Transporte S.A. (TRANSPETRO), Rio de Janeiro, RJ (Brazil)

2012-07-01

One of the key questions of modern society consists on the rational use of the planet's natural resources and energy. Due to the lack of energy, many companies are forced to reduce their workload, especially during peak hours, because residential demand reaches its top and there is not enough energy to fulfill the needs of all users, which affects major industries. Therefore, using energy more wisely has become a strategic issue for any company, due to the limited supply and also for the excessive cost it represents. With the objective of saving energy and reducing costs for oil pipelines, it has been identified that the increase in energy consumption is primordially related to pumping stations and also by the way many facilities are operated, that is, differently from what was originally designed. Realizing this opportunity, in order to optimize the process, this article intends to examine the possibility of gains evaluating alternatives regarding changes in the pump scheme configuration and non-use of pump stations at peak hours. Initially, an oil pipeline with potential to reduce energy costs was chosen being followed by a history analysis, in order to confirm if there was sufficient room to change the operation mode. After confirming the pipeline choice, the system is briefly described and the literature is reviewed, explaining how the energy cost is calculated and also the main characteristics of a pumping system in series and in parallel. In that sequence, technically feasible alternatives are studied in order to operate and also to negotiate the energy demand contract. Finally, costs are calculated to identify the most economical alternative, that is, for a scenario with no increase in the actual transported volume of the pipeline and for another scenario that considers an increase of about 20%. The conclusion of this study indicates that the chosen pipeline can achieve a reduction on energy costs of up to 25% without the need for investments in new

Non-Hardware ("Soft") Cost-Reduction Roadmap for Residential and Small Commercial Solar Photovoltaics, 2013-2020

Energy Technology Data Exchange (ETDEWEB)

Ardani, K.; Seif, D.; Margolis, R.; Morris, J.; Davidson, C.; Truitt, S.; Torbert, R.

2013-08-01

The objective of this analysis is to roadmap the cost reductions and innovations necessary to achieve the U.S. Department of Energy (DOE) SunShot Initiative's total soft-cost targets by 2020. The roadmap focuses on advances in four soft-cost areas: (1) customer acquisition; (2) permitting, inspection, and interconnection (PII); (3) installation labor; and (4) financing. Financing cost reductions are in terms of the weighted average cost of capital (WACC) for financing PV system installations, with real-percent targets of 3.0% (residential) and 3.4% (commercial).

Cost reduction with maintenance ECT in refractory bipolar disorder.

Science.gov (United States)

Bonds, C; Frye, M A; Coudreaut, M F; Cunningham, M; Spearing, M; McGuire, M; Guze, B

1998-03-01

A case report of outpatient maintenance electroconvulsive therapy (ECT) is presented in a patient with bipolar disorder type I refractory to conventional medication treatment but responsive to ECT. A cost comparison is made showing substantial savings when outpatient maintenance ECT is used in lieu of inpatient hospitalization with ECT. A detailed life chart illustrating multiple medication trials that failed to stabilize the patient accompanies the financial summary. This case highlights the advantages of outpatient maintenance ECT for bipolar depression particularly with regard to safety, efficacy, and significant health care cost reduction.

Investigation of different modifications of the modular high temperature reactor for cost reduction

International Nuclear Information System (INIS)

Heek, A. van.

1993-06-01

Regarding the specific costs reactor with low power output have disadvantages compared to large reactors. In this study it was investigated for the HTR Module how to reduce the specific investment costs and consequently the electricity production costs by modification of the reactor and the power plant design. To reduce the investment costs different design changes were investigated, e.g. possible alternatives for the arrangement of the reactors and the steam generators and a different building layout. The cost reduction gained by a more compact type of construction and a reduction of the number of large components remains below 10%. The use of a gas turbine instead of a steam turbine with steam generator would result in a more efficient cost reduction. The increase in the power output has a much bigger potential to reduce the electricity production costs. The best way to realize this is the changing of the core geometry from cylindric to annular. A module concept with a power maximized under certain boundary conditions (limitation of the core temperatures in case of accident, use of proven technology) was worked out in detail. The optimum core geometry and power density, determined by tolerable accident temperatures and core pressure loss, make a thermal power of 350 MW possible. The physical properties and the accident behaviour in case of pressure release and water ingress were investigated. The specific investment costs and the electricity production costs of a 4-Modular Plant for pure electricity production are reduced about 28% resp. 19% compared with the 200 MWth-Module (KWU/Interatom). (orig.) [de

Cost-effectiveness analysis of salt reduction policies to reduce coronary heart disease in Syria, 2010-2020.

Science.gov (United States)

Wilcox, Meredith L; Mason, Helen; Fouad, Fouad M; Rastam, Samer; al Ali, Radwan; Page, Timothy F; Capewell, Simon; O'Flaherty, Martin; Maziak, Wasim

2015-01-01

This study presents a cost-effectiveness analysis of salt reduction policies to lower coronary heart disease in Syria. Costs and benefits of a health promotion campaign about salt reduction (HP); labeling of salt content on packaged foods (L); reformulation of salt content within packaged foods (R); and combinations of the three were estimated over a 10-year time frame. Policies were deemed cost-effective if their cost-effectiveness ratios were below the region's established threshold of $38,997 purchasing power parity (PPP). Sensitivity analysis was conducted to account for the uncertainty in the reduction of salt intake. HP, L, and R+HP+L were cost-saving using the best estimates. The remaining policies were cost-effective (CERs: R=$5,453 PPP/LYG; R+HP=$2,201 PPP/LYG; R+L=$2,125 PPP/LYG). R+HP+L provided the largest benefit with net savings using the best and maximum estimates, while R+L was cost-effective with the lowest marginal cost using the minimum estimates. This study demonstrated that all policies were cost-saving or cost effective, with the combination of reformulation plus labeling and a comprehensive policy involving all three approaches being the most promising salt reduction strategies to reduce CHD mortality in Syria.

Major cost savings associated with biologic dose reduction in patients with inflammatory arthritis.

LENUS (Irish Health Repository)

Murphy, C L

2015-01-01

The purpose of this study was to explore whether patients with Inflammatory Arthritis (IA) (Rheumatoid Arthritis (RA), Psoriatic Arthritis (PsA) or Ankylosing Spondylitis (AS)) would remain in remission following a reduction in biologic dosing frequency and to calculate the cost savings associated with dose reduction. This prospective non-blinded non-randomised study commenced in 2010. Patients with Inflammatory Arthritis being treated with a biologic agent were screened for disease activity. A cohort of those in remission according to standardized disease activity indices (DAS28 < 2.6, BASDAI < 4) was offered a reduction in dosing frequency of two commonly used biologic therapies (etanercept 50 mg once per fortnight instead of weekly, adalimumab 40 mg once per month instead of fortnightly). Patients were assessed for disease activity at 3, 6, 12, 18 and 24 months following reduction in dosing frequency. Cost saving was calculated. 79 patients with inflammatory arthritis in remission were recruited. 57% had rheumatoid arthritis (n = 45), 13% psoriatic arthritis (n = 10) and 30% ankylosing spondylitis (n = 24). 57% (n = 45) were taking etanercept and 43% (n = 34) adalimumab. The percentage of patients in remission at 24 months was 56% (n = 44). This resulted in an actual saving to the state of approximately 600,000 euro over two years. This study demonstrates the reduction in biologic dosing frequency is feasible in Inflammatory Arthritis. There was a considerable cost saving at two years. The potential for major cost savings in biologic usage should be pursued further.

Does mitigation save? Reviewing cost-benefit analyses of disaster risk reduction

OpenAIRE

Shreve, Cheney M.; Kelman, Ilan

2014-01-01

The benefit-cost-ratio (BCR), used in cost-benefit analysis (CBA), is an indicator that attempts to summarize the overall value for money of a project. Disaster costs continue to rise and the demand has increased to demonstrate the economic benefit of disaster risk reduction (DRR) to policy makers. This study compiles and compares original CBA case studies reporting DRR BCRs, without restrictions as to hazard type, location, scale, or other parameters. Many results were identified supporting ...

Reduction of Total Ownership Costs (R-TOC) Best Practices Guide

National Research Council Canada - National Science Library

Reed, Danny

2003-01-01

The purpose of the Reduction of Total Ownership Costs (R-TOC) program is to achieve readiness improvements in weapon systems by improving the reliability of the systems or the efficiency of the processes used to support...

Cost reduction has priority in solar cell research

International Nuclear Information System (INIS)

Van Zolingen, R.J.C.; Sinke, W.C.

1993-01-01

The main topic in the research and development of photovoltaic cells is cost reduction. Although new materials, improved techniques and increasing efficiency are promising aspects of the clean and sustainable option of a photovoltaic conversion of sunlight to produce electricity at a large scale, the high prices form an obstacle. Photovoltaic conversion is at least a factor three too expensive compared to the conventional power generation techniques by means of fossil fuels. Attention is paid to the theoretical maximum efficiency of photovoltaic conversion, the efficiencies realized sofar, the importance of thin film solar cells, the payback period of photovoltaic modules, the environmental impacts of using photovoltaic cells, and finally the costs. 2 figs., 1 ill., 2 tabs., 6 refs

Low-cost risk reduction strategy for small workplaces: how can we spread good practices?

Science.gov (United States)

Kogi, K

2006-01-01

Recent advances in health risk reduction approaches are examined based on inter-country networking experiences. A noteworthy progress is the wider application of low-cost improvements to risk reduction particularly in small enterprises and agriculture in both industrially developing and developed countries. This is helped by the readiness of managers and workers to implement these improvements despite many constraints. Typical improvements include mobile racks, simple workstation changes, screening hazards, better welfare facilities and teamwork arrangements. In view of the complex circumstances of work-related health risks, it is important to know whether a low-cost strategy can advance risk reduction practices effectively and what support measures are necessary. It is confirmed that the strategy can overcome related constraints through its advantages. Main advantages lie in (a) the facilitation of improved practices in multiple technical areas, (b) the strengthening of realistic stepwise risk reduction, and (c) the enhanced multiplier effects through training of local trainers. Action-oriented risk assessment tools, such as action checklists and low-cost improvement guides, can encourage risk-reducing measures adjusted to each local situation. It is suggested to spread the low-cost risk reduction strategy for improving small workplaces in diversified settings with the support of these locally tailored tools.

Cost reduction study for the LANL KrF laser-driven LMF design

International Nuclear Information System (INIS)

1989-01-01

This report is in fulfillment of the deliverable requirements for the optical components portions of the LANL-KrF Laser-Driven LMF Design Cost Reduction Study. This report examines the future cost reductions that may accrue through the use of mass production, innovative manufacturing techniques, and new materials. Results are based on data collection and survey of optical component manufacturers, BDM experience, and existing cost models. These data provide a good representation of current methods and technologies from which future estimates can be made. From these data, a series of scaling relationships were developed to project future costs for a selected set of technologies. The scaling relationships are sensitive to cost driving parameters such as size and surface figure requirements as well as quantity requirements, production rate, materials, and manufacturing processes. In addition to the scaling relationships, descriptions of the selected processes were developed along with graphical representations of the processes. This report provides a useful tool in projecting the costs of advanced laser concepts at the component level of detail. A mix of the most diverse yet comparable technologies was chosen for this study. This yielded a useful, yet manageable number of variables to examine. The study has resulted in a first-order cost model which predicts the relative cost behavior of optical components within different variable constraints

Reductions in cost and greenhouse gas emissions with new bulk ship designs enabled by the Panama Canal expansion

International Nuclear Information System (INIS)

Lindstad, Haakon; Jullumstrø, Egil; Sandaas, Inge

2013-01-01

Historically, fuel costs have been small compared with the fixed costs of a bulk vessel, its crewing and management. Today, however, fuel accounts for more than 50% of the total costs. In combination with an introduction of stricter energy efficiency requirements for new vessels, this might make design improvement a necessity for all new bulk vessels. This is in contradiction to traditional bulk vessel designs, where the focus has been on maximizing the cargo-carrying capacity at the lowest possible building cost and not on minimizing the energy consumption. Moreover, the Panama Canal has historically been an important design criterion, while the new canal locks from 2014 will significantly increase the maximum size of vessels that can pass. The present paper provides an assessment of cost and emissions as a function of alternative bulk vessel designs with focus on a vessel's beam, length and hull slenderness, expressed by the length displacement ratio for three fuel price scenarios. The result shows that with slenderer hull forms the emissions drop. With today's fuel price of 600 USD per ton of fuel, emissions can thus be reduced by up to 15–25% at a negative abatement cost. - Highlights: • We have assessed cost and emissions as a function of alternative bulk vessel designs. • The design focus has been on vessel beam, length, hull slenderness and bow section length. • The assessment has taken into account three different fuel price scenarios. • When the block coefficient is reduced and the hull becomes more slender the emissions drop. • With a fuel price of 600 USD/t, emissions can be reduced by up to 15–25% at a negative abatement cost

Current status and future potential for advanced volume reduction technologies

International Nuclear Information System (INIS)

Rutland, L.; Naughton, M.D.; Papaiya, N.C.

1984-01-01

With escalating costs for disposal of low-level radioactive waste (LLW) from nuclear power plants, and the possibility of unavailability of disposal space, some nuclear power utilities responded by commiting to implementing advanced volume reduction (VR) systems. This paper presents recent experience to implement advanced volume reduction technologies; their performance and typical operating and capital costs. This experience in the light of current economic conditions may enable us to predict the direction that future advanced VR technology commitments is taking

Long-term, low-level radwaste volume-reduction strategies. Volume 4. Waste disposal costs. Final report

International Nuclear Information System (INIS)

Sutherland, A.A.; Adam, J.A.; Rogers, V.C.; Merrell, G.B.

1984-11-01

Volume 4 establishes pricing levels at new shallow land burial grounds. The following conclusions can be drawn from the analyses described in the preceding chapters: Application of volume reduction techniques by utilities can have a significant impact on the volumes of wastes going to low-level radioactive waste disposal sites. Using the relative waste stream volumes in NRC81 and the maximum volume reduction ratios provided by Burns and Roe, Inc., it was calculated that if all utilities use maximum volume reduction the rate of waste receipt at disposal sites will be reduced by 40 percent. When a disposal site receives a lower volume of waste its total cost of operation does not decrease by the same proportion. Therefore the average cost for a unit volume of waste received goes up. Whether the disposal site operator knows in advance that he will receive a smaller amount of waste has little influence on the average unit cost ($/ft) of the waste disposed. For the pricing algorithm postulated, the average disposal cost to utilities that volume reduce is relatively independent of whether all utilities practice volume reduction or only a few volume reduce. The general effect of volume reduction by utilities is to reduce their average disposal site costs by a factor of between 1.5 to 2.5. This factor is generally independent of the size of the disposal site. The largest absolute savings in disposal site costs when utilities volume reduce occurs when small disposal sites are involved. This results from the fact that unit costs are higher at small sites. Including in the pricing algorithm a factor that penalizes waste generators who contribute larger amounts of the mobile nuclides 3 H, 14 C, 99 Tc, and 129 I, which may be the subject of site inventory limits, lowers unit disposal costs for utility wastes that contain only small amounts of the nuclides and raises unit costs for other utility wastes

The impact of unit cost reductions on gross profit: Increasing or decreasing returns?

Directory of Open Access Journals (Sweden)

Ely Dahan

2011-09-01

Full Text Available We suggest that marketers actively participate in reducing unit costs during new product development, consistent with the theme of integrated marketing and manufacturing. Most marketing managers misjudge the impact on gross profit of reducing variable unit manufacturing costs, mistakenly believing that such cost reductions yield decreasing or linear returns while they actually generate increasing returns.

Levelized cost-risk reduction prioritization of waste disposal options

International Nuclear Information System (INIS)

Wilkinson, V.K.; Young, J.M.

1992-01-01

The prioritization of solid waste disposal options in terms of reduced risk to workers, the public, and the environment has recently generated considerable governmental and public interest. In this paper we address the development of a methodology to establish priorities for waste disposal options, such as incineration, landfills, long-term storage, waste minimization, etc. The study is one result of an overall project to develop methodologies for Probabilistic Risk Assessments (PRAs) of non-reactor nuclear facilities for the US Department of Energy. Option preferences are based on a levelized cost-risk reduction analysis. Option rankings are developed as functions of disposal option cost and timing, relative long- and short-term risks, and possible accident scenarios. We examine the annual costs and risks for each option over a large number of years. Risk, in this paper, is defined in terms of annual fatalities (both prompt and long-term) and environmental restoration costs that might result from either an accidental release or long-term exposure to both plant workers and the public near the site or facility. We use event timing to weigh both costs and risks; near-term costs and risks are discounted less than future expenditures and fatalities. This technique levels the timing of cash flows and benefits by converting future costs and benefits to present value costs and benefits. We give an example Levelized Cost-Benefit Analysis of incinerator location options to demonstrate the methodology and required data

GTHTR300 cost reduction through design upgrade and cogeneration

Energy Technology Data Exchange (ETDEWEB)

Yan, Xing L., E-mail: yan.xing@jaea.go.jp; Sato, Hiroyuki; Kamiji, Yu; Imai, Yoshiyuki; Terada, Atsuhiko; Tachibana, Yukio; Kunitomi, Kazuhiko

2016-09-15

Japan Atomic Energy Agency began design and development of the Gas Turbine High Temperature Reactor of 300MWe nominal output (GTHTR300) in 2001. The reactor baseline design completed three years later was based on 850 °C core outlet temperature and a direct cycle gas turbine balance of plant. It attained 45.6% net power generation efficiency and 3.5 US¢/kW h cost of electricity. The cost was estimated 20% lower than LWR. The latest design upgrade has incorporated several major technological advances made in the past ten years to both reactor and balance of plant. As described in this paper, these advances have enabled raising the design basis reactor core outlet temperature to 950 °C and increasing power generating efficiency by nearly 5% point. Further implementation of seawater desalination cogeneration is made through employing a newly-proposed multi-stage flash process. Through efficient waste heat recovery of the reactor gas turbine power conversion cycle, a large cost credit is obtained against the conventionally produced water prices. Together, the design upgrade and the cogeneration are shown to reduce the GTHTR300 cost of electricity to under 2.7 US¢/kW h.

GTHTR300 cost reduction through design upgrade and cogeneration

International Nuclear Information System (INIS)

Yan, Xing L.; Sato, Hiroyuki; Kamiji, Yu; Imai, Yoshiyuki; Terada, Atsuhiko; Tachibana, Yukio; Kunitomi, Kazuhiko

2014-01-01

Japan Atomic Energy Agency began design and development of the Gas Turbine High Temperature Reactor of 300MWe nominal output (GTHTR300) in 2001. The reactor baseline design completed three years later was based on 850°C core outlet temperature and a direct cycle gas turbine balance of plant. It attained 45.6% net power generation efficiency and 3.5US¢/KWh cost of electricity. The cost was estimated 20% lower than LWR. The latest design upgrade has incorporated several major technological advances made in the past ten years to both reactor and balance of plant. As described in this paper, these advances have enabled raising the design basis reactor core outlet temperature to 950°C and increasing power generating efficiency by nearly 5% point. Further implementation of seawater desalination cogeneration is made through employing a newly-proposed multi-stage flash process. Through efficient waste heat recovery of the reactor gas turbine power conversion cycle, a large cost credit is obtained against the conventionally produced water prices. Together, the design upgrade and the cogeneration are shown to reduce the GTHTR300 cost of electricity to under 2.7 US¢/KWh. (author)

Reduction of cost of poor quality in nuclear fuel manufacturing

International Nuclear Information System (INIS)

Holmqvist, B.

2000-01-01

Within ABB reduction of Cost of Poor Quality (COPQ) has become an important process to focus quality improvement initiatives on bottom-line results. The process leads to improved bottom-line results, through cost savings, but it also leads to quality improvements in our processes, products and services. The traditional way of measuring and controlling COPQ in the production workshops is not enough. It is of vital importance to include other non-value creating costs as well, both internally, e.g. in the engineering work, and externally, in delivered products and purchased goods. ABB Atom has since a number of years used the COPQ process in the various steps of nuclear fuel manufacturing. The definition has been expanded to cover, for instance: Scrap, rework and deviations; Margin slippage; Warranty costs; Lack of supplier performance; Excess and obsolete inventory. Each of the COPQ elements has a responsible 'owner' within the management of the Nuclear Fuel Division. The owners form a COPQ task force, which is responsible for analyzing results, setting goals and initiating improvement actions. The COPQ result is updated each month and is presented to all employees in several ways, such as Intranet. For the various COPQ elements improvement initiatives have been implemented. The presentation will describe some of them, such as reduction of: Scrap, rework and deviations through a process with zero defect meetings, high level of process automation, statistical methods; Margin slippage through business process re-engineering; Warranty costs through an improved design review process and expanded testing of new products; Costs for lack in supplier performance through a new concept for supplier QA/QC. It is our strong belief that both ABB Atom and our Customers will benefit from the COPQ process since it leads to a higher quality for nuclear fuel and control rods and facilitates lower product prices. (author)

Seeking the competitive advantage: it's more than cost reduction.

Science.gov (United States)

South, S F

1999-01-01

Most organizations focus considerable time and energy on reducing operating costs as a way to attain marketplace advantage. This strategy was not inappropriate in the past. To be competitive in the future, however, focus must be placed on other issues, not just cost reduction. The near future will be dominated by service industries, knowledge management, and virtual partnerships, with production optimization and flexibility, innovation, and strong partnerships defining those organizations that attain competitive advantage. Competitive advantage will reside in clarifying the vision and strategic plan, reviewing and redesigning work processes to optimize resources and value-added work, and creating change-ready environments and empowered workforces.

Cost-of-illness analysis reveals potential healthcare savings with reductions in type 2 diabetes and cardiovascular disease following recommended intakes of dietary fibre in Canada

Directory of Open Access Journals (Sweden)

Mohammad eAbdullah

2015-08-01

Full Text Available Background: Consumption of fibre-rich diets is associated with favourable impacts on type 2 diabetes (T2D and cardiovascular disease (CVD, two of the most costly ailments worldwide, however the economic value of altered fibre intakes remains poorly understood. Methods: A cost-of-illness analysis was conducted to identify the percentage of adults expected to consume fibre-rich diets in Canada, estimate fibre intakes in relation to T2D and CVD reductions, and assess the potential annual savings in healthcare costs with reductions in rates of these two epidemics. Results: Non-trivial healthcare and related savings of CAD$35.9-$718.8 million in T2D costs and CAD$64.8-$1,295.7 million in CVD costs were calculated under a scenario where cereal fibre was used to increase current intakes of dietary fibre to the recommended levels of 38 g per day for men and 25 g per day for women. Each 1 g per day increase in fibre consumption resulted in annual CAD$2.6-$51.1 and $4.6-$92.1 million savings for T2D and CVD, respectively. Conclusions: Strategies to increase consumers’ knowledge of the recommended dietary fibre intakes, as part of healthy diet, and to facilitate stakeholder synergy are warranted to enable better management of costs associated with T2D and CVD in Canada.

Understanding the reductions in US corn ethanol production costs: an experience curve approach

NARCIS (Netherlands)

Hettinga, W.; Junginger, H.M.; Dekker, S.C.; Hoogwijk, M.; McAloon, A.; Hicks, K.

2009-01-01

The US is currently the world's largest ethanol producer. An increasing percentage is used as transportation fuel, but debates continue on its costs competitiveness and energy balance. In this study, technological development of ethanol production and resulting cost reductions are investigated by

Contagion effect of enabling or coercive use of costing model within the managerial couple in lean organizations

DEFF Research Database (Denmark)

Kristensen, Thomas; Israelsen, Poul

In the lean strategy is enabling formalization behaviour expected at the lower levels of management to be successful. We study the contagion effect between the superior, middle manager, of the lower level manager. This effect is proposed to be a dominant contingency variable for the use of costin...... models at the lower levels of management. Thus the use of costing models at the middle manager level is an important key to be successful with the lean package.......In the lean strategy is enabling formalization behaviour expected at the lower levels of management to be successful. We study the contagion effect between the superior, middle manager, of the lower level manager. This effect is proposed to be a dominant contingency variable for the use of costing...

Risk management study for the Hanford Site facilities: Risk reduction cost comparison for the retired Hanford Site facilities

International Nuclear Information System (INIS)

Coles, G.A.; Egge, R.G.; Senger, E.; Shultz, M.W.; Taylor, W.E.

1994-02-01

This document provides a cost-comparison evaluation for implementing certain risk-reduction measures and their effect on the overall risk of the 100 and 200 Area retired, surplus facilities. The evaluation is based on conditions that existed at the time the risk evaluation team performed facility investigations, and does not acknowledge risk-reduction measures that occurred soon after risk identification. This evaluation is one part of an overall risk management study for these facilities. The retired facilities investigated for this evaluation are located in the 100 and 200 Areas of the 1450-km 2 Hanford Site. The Hanford Site is a semiarid tract of land in southeastern Washington State. The nearest population center is Richland, Washington, (population 32,000) 30 km southeast of the 200 Area. This cost-comparison evaluation (1) determines relative costs for reducing risk to acceptable levels; (2) compares the cost of reducing risk using different risk-reduction options; and (3) compares the cost of reducing risks at different facilities. The result is an identification of the cost effective risk-reduction measures. Supporting information required to develop costs of the various risk-reduction options also is included

Cost-Benefit Analysis of Green Infrastructures on Community Stormwater Reduction and Utilization: A Case of Beijing, China.

Science.gov (United States)

Liu, Wen; Chen, Weiping; Feng, Qi; Peng, Chi; Kang, Peng

2016-12-01

Cost-benefit analysis is demanded for guiding the plan, design and construction of green infrastructure practices in rapidly urbanized regions. We developed a framework to calculate the costs and benefits of different green infrastructures on stormwater reduction and utilization. A typical community of 54,783 m 2 in Beijing was selected for case study. For the four designed green infrastructure scenarios (green space depression, porous brick pavement, storage pond, and their combination), the average annual costs of green infrastructure facilities are ranged from 40.54 to 110.31 thousand yuan, and the average of the cost per m 3 stormwater reduction and utilization is 4.61 yuan. The total average annual benefits of stormwater reduction and utilization by green infrastructures of the community are ranged from 63.24 to 250.15 thousand yuan, and the benefit per m 3 stormwater reduction and utilization is ranged from 5.78 to 11.14 yuan. The average ratio of average annual benefit to cost of four green infrastructure facilities is 1.91. The integrated facilities had the highest economic feasibility with a benefit to cost ratio of 2.27, and followed by the storage pond construction with a benefit to cost ratio of 2.14. The results suggested that while the stormwater reduction and utilization by green infrastructures had higher construction and maintenance costs, their comprehensive benefits including source water replacements benefits, environmental benefits and avoided cost benefits are potentially interesting. The green infrastructure practices should be promoted for sustainable management of urban stormwater.

Cost reduction potentials of offshore wind power in Germany

International Nuclear Information System (INIS)

Hobohm, Jens; Krampe, Leonard; Peter, Frank

2014-01-01

Offshore wind power is a major hope for the German energy turnaround. However, it will only be possible to tap its cost reduction potentials if industry, the political leadership and the administrative authorities join forces to create the necessary preconditions. An important requirement for this capital-intensive technology are stable legal and political framework conditions. A recent study on the future shows what needs to be done.

48 CFR 52.215-11 - Price Reduction for Defective Certified Cost or Pricing Data-Modifications.

Science.gov (United States)

2010-10-01

... accordingly and the contract shall be modified to reflect the reduction. This right to a price reduction is... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Price Reduction for... CONTRACT CLAUSES Text of Provisions and Clauses 52.215-11 Price Reduction for Defective Certified Cost or...

Annual Energy Usage Reduction and Cost Savings of a School: End-Use Energy Analysis

Science.gov (United States)

Alghoul, M. A.; Bakhtyar, B.; Asim, Nilofar; Sopian, K.

2014-01-01

Buildings are among the largest consumers of energy. Part of the energy is wasted due to the habits of users and equipment conditions. A solution to this problem is efficient energy usage. To this end, an energy audit can be conducted to assess the energy efficiency. This study aims to analyze the energy usage of a primary school and identify the potential energy reductions and cost savings. A preliminary audit was conducted, and several energy conservation measures were proposed. The energy conservation measures, with reference to the MS1525:2007 standard, were modelled to identify the potential energy reduction and cost savings. It was found that the school's usage of electricity exceeded its need, incurring an excess expenditure of RM 2947.42. From the lighting system alone, it was found that there is a potential energy reduction of 5489.06 kWh, which gives a cost saving of RM 2282.52 via the improvement of lighting system design and its operating hours. Overall, it was found that there is a potential energy reduction and cost saving of 20.7% when the energy conservation measures are earnestly implemented. The previous energy intensity of the school was found to be 50.6 kWh/m2/year, but can theoretically be reduced to 40.19 kWh/mm2/year. PMID:25485294

Public risk-reduction measures: cost-effectiveness from a global point-of-view

International Nuclear Information System (INIS)

Oliveira, L.F.S. de; Motta Barros, E.B. da; Fleming, P.V.; Rosa, L.P.

1985-05-01

A review of systemic or global approach to cost-effectiveness analysis of risk-reduction measures is presented, and its advantages and limitations are discussed. The method is applied for problem of the cost-effectiveness of increasing the Angra 3 reactor containment wall thickness from 60cm to 180cm thick, in case of a direct commercial aircraft crash on it. (Author) [pt

COST OF SELECTIVE CATALYTIC REDUCTION (SCR) APPLICATION FOR NOX CONTROL ON COAL-FIRED BOILERS

Science.gov (United States)

The report provides a methodology for estimating budgetary costs associated with retrofit applications of selective catalytic reduction (SCR) technology on coal-fired boilers. SCR is a postcombustion nitrogen oxides (NOx) control technology capable of providing NOx reductions >90...

Cost-benefit analysis of telehealth in pre-hospital care.

Science.gov (United States)

Langabeer, James R; Champagne-Langabeer, Tiffany; Alqusairi, Diaa; Kim, Junghyun; Jackson, Adria; Persse, David; Gonzalez, Michael

2017-09-01

Objective There has been very little use of telehealth in pre-hospital emergency medical services (EMS), yet the potential exists for this technology to transform the current delivery model. In this study, we explore the costs and benefits of one large telehealth EMS initiative. Methods Using a case-control study design and both micro- and gross-costing data from the Houston Fire Department EMS electronic patient care record system, we conducted a cost-benefit analysis (CBA) comparing costs with potential savings associated with patients treated through a telehealth-enabled intervention. The intervention consisted of telehealth-based consultation between the 911 patient and an EMS physician, to evaluate and triage the necessity for patient transport to a hospital emergency department (ED). Patients with non-urgent, primary care-related conditions were then scheduled and transported by alternative means to an affiliated primary care clinic. We measured CBA as both total cost savings and cost per ED visit averted, in US Dollars ($USD). Results In total, 5570 patients were treated over the first full 12 months with a telehealth-enabled care model. We found a 6.7% absolute reduction in potentially medically unnecessary ED visits, and a 44-minute reduction in total ambulance back-in-service times. The average cost for a telehealth patient was $167, which was a statistically significantly $103 less than the control group ( p cost savings from the societal perspective, or $2468 cost savings per ED visit averted (benefit). Conclusion Patient care enabled by telehealth in a pre-hospital environment, is a more cost effective alternative compared to the traditional EMS 'treat and transport to ED' model.

Reduction of capital costs of nuclear power plants. NEA-report

International Nuclear Information System (INIS)

2000-01-01

Since the the mid-1980s, the declining real prices of fossil fuels and the significant improvements in thermal efficiencies of combined cycle power plants have eroded the economic competitiveness of nuclear power plants in most OECD countries. In order for nuclear power to remain a viable option for the next millennium, the cost of electricity from nuclear power plant must be greatly reduced to be competitive with alternative sources. Of the three major components of nuclear generation cost - capital, O and M and fuel - the capital cost component makes up approximately 60 per cent of the total. Therefore, identification of the means to reduce the capital costs of nuclear power plants is a high priority activity toward keeping nuclear power competitive. Among a number of capital cost reduction measures, the principal ones were agreed by the expert group as follows: Increased plant size, improved construction methods, reduced construction schedule, design improvement, improved procurement, organisation and contractual aspects, standardisation and construction in series, multiple unit construction, regulatory and policy reform. (orig.)

Beyond the learning curve: factors influencing cost reductions in photovoltaics

International Nuclear Information System (INIS)

Nemet, Gregory F.

2006-01-01

The extent and timing of cost-reducing improvements in low-carbon energy systems are important sources of uncertainty in future levels of greenhouse-gas emissions. Models that assess the costs of climate change mitigation policy, and energy policy in general, rely heavily on learning curves to include technology dynamics. Historically, no energy technology has changed more dramatically than photovoltaics (PV), the cost of which has declined by a factor of nearly 100 since the 1950s. Which changes were most important in accounting for the cost reductions that have occurred over the past three decades? Are these results consistent with the notion that learning from experience drove technical change? In this paper, empirical data are assembled to populate a simple model identifying the most important factors affecting the cost of PV. The results indicate that learning from experience, the theoretical mechanism used to explain learning curves, only weakly explains change in the most important factors-plant size, module efficiency, and the cost of silicon. Ways in which the consideration of a broader set of influences, such as technical barriers, industry structure, and characteristics of demand, might be used to inform energy technology policy are discussed

Explaining the reductions in US corn ethanol processing costs: Testing competing hypotheses

International Nuclear Information System (INIS)

Chen Xiaoguang; Khanna, Madhu

2012-01-01

The processing costs of US corn ethanol have declined by 45% since 1983 as production volumes have increased seventeen-fold. We investigate the role of various factors that could explain this, including economies of scale, cumulative experience, induced innovation in response to rising input prices, an autonomous technological change, and trade induced competition from imported ethanol. Using data on dry-mill ethanol processing costs over the 1983–2005 period, we find evidence to show that US corn ethanol production exhibited decreasing returns to scale, that learning by doing played an important role in reducing these processing costs with a learning rate of 0.25, and that sugarcane ethanol imports contributed to making the corn ethanol industry more competitive. Other factors such as the rising prices of energy and labor did induce lower processing costs, but the effect is not statistically significant. The inclusion of these competing explanations for the reduction in processing costs of US corn ethanol lead to a significantly higher learning rate than otherwise, and this learning rate is found to be robust across specifications. - Highlights: ► We investigate the role of various factors that could explain the reduction in US corn ethanol processing costs over the period 1983–2005. ► We find that US corn ethanol production exhibited decreasing returns to scale. ► Learning by doing played an important role in reducing these costs with a learning rate of 0.25. ► Sugarcane ethanol imports contributed to making the corn ethanol industry more competitive. ► Rising prices of energy and labor did induce lower processing costs, but the effect is not statistically significant.

Explaining the experience curve: Cost reductions of Brazilian ethanol from sugarcane

International Nuclear Information System (INIS)

van den Wall Bake, J.D.; Junginger, M.; Faaij, A.; Poot, T.; Walter, A.

2009-01-01

Production costs of bio-ethanol from sugarcane in Brazil have declined continuously over the last three decades. The aims of this study are to determine underlying reasons behind these cost reductions, and to assess whether the experience curve concept can be used to describe the development of feedstock costs and industrial production costs. The analysis was performed using average national costs data, a number of prices (as a proxy for production costs) and data on annual Brazilian production volumes. Results show that the progress ratio (PR) for feedstock costs is 0.68 and 0.81 for industrial costs (excluding feedstock costs). The experience curve of total production costs results in a PR of 0.80. Cost breakdowns of sugarcane production show that all sub-processes contributed to the total, but that increasing yields have been the main driving force. Industrial costs mainly decreased because of increasing scales of the ethanol plants. Total production costs at present are approximately 340 US$/m ethanol 3 (16 US$/GJ). Based on the experience curves for feedstock and industrial costs, total ethanol production costs in 2020 are estimated between US$ 200 and 260/m 3 (9.4-12.2 US$/GJ). We conclude that using disaggregated experience curves for feedstock and industrial processing costs provide more insights into the factors that lowered costs in the past, and allow more accurate estimations for future cost developments. (author)

Cost reduction for web-based data imputation

KAUST Repository

Li, Zhixu

2014-01-01

Web-based Data Imputation enables the completion of incomplete data sets by retrieving absent field values from the Web. In particular, complete fields can be used as keywords in imputation queries for absent fields. However, due to the ambiguity of these keywords and the data complexity on the Web, different queries may retrieve different answers to the same absent field value. To decide the most probable right answer to each absent filed value, existing method issues quite a few available imputation queries for each absent value, and then vote on deciding the most probable right answer. As a result, we have to issue a large number of imputation queries for filling all absent values in an incomplete data set, which brings a large overhead. In this paper, we work on reducing the cost of Web-based Data Imputation in two aspects: First, we propose a query execution scheme which can secure the most probable right answer to an absent field value by issuing as few imputation queries as possible. Second, we recognize and prune queries that probably will fail to return any answers a priori. Our extensive experimental evaluation shows that our proposed techniques substantially reduce the cost of Web-based Imputation without hurting its high imputation accuracy. © 2014 Springer International Publishing Switzerland.

Cost-effectiveness analysis of risk reduction at nuclear power plants

International Nuclear Information System (INIS)

Lochard, J.; Maccia, C.; Pages, P.

1985-01-01

Cost-effectiveness analysis of risk reduction is now widely accepted as a rational analytical framework to consistently address the resource allocation problem underlying any risk management process. This paper presents how this technique can be usefully applied to complex systems such as the management of radioactive releases from nuclear power plants into the environment. (orig.) [de

Possibility of material cost reduction toward development of low-cost second-generation superconducting wires

Science.gov (United States)

Ichinose, Ataru; Horii, Shigeru; Doi, Toshiya

2017-10-01

Two approaches to reducing the material cost of second-generation superconducting wires are proposed in this paper: (1) instead of the electrical stabilizing layers of silver and copper presently used on the superconducting layer, a Nb-doped SrTiO3 conductive buffer layer and cube-textured Cu are proposed as an advanced architecture, and (2) the use of an electromagnetic (EM) steel tape as a metal substrate of coated conductors in a conventional architecture. In structures fabricated without using electrical stabilizing layers on the superconducting layer, the critical current density achieved at 77 K in a self-field was approximately 2.6 MA/cm2. On the other hand, in the case of using EM steel tapes, although the critical current density was far from practical at the current stage, the biaxial alignment of YBa2Cu3O y (YBCO) and buffer layers was realized without oxidation on the metal surface. In this study, the possibility of material cost reduction has been strongly indicated toward the development of low-cost second-generation superconducting wires in the near future.

Cost reduction potentials in the German market for balancing power

International Nuclear Information System (INIS)

Flinkerbusch, Kai; Heuterkes, Michael

2010-01-01

This article examines potential cost reductions in the market for balancing power by pooling all four German control areas. In a united control area both the procurement and the production of balancing power may be more efficient than in four separated control areas. Our data contain bids on energy procurement as well as balancing power flows in the period from December 2007 to November 2008. A reference scenario simulates the market results for secondary and tertiary balancing power. Subsequently, we simulate a united control area. We show that in the period under review the total costs of balancing power are reduced by 17%. (author)

Cost-of-illness analysis reveals potential healthcare savings with reductions in type 2 diabetes and cardiovascular disease following recommended intakes of dietary fiber in Canada

Science.gov (United States)

Abdullah, Mohammad M. H.; Gyles, Collin L.; Marinangeli, Christopher P. F.; Carlberg, Jared G.; Jones, Peter J. H.

2015-01-01

Background: Type 2 diabetes (T2D) and cardiovascular disease (CVD) are leading causes of mortality and two of the most costly diet-related ailments worldwide. Consumption of fiber-rich diets has been repeatedly associated with favorable impacts on these co-epidemics, however, the healthcare cost-related economic value of altered dietary fiber intakes remains poorly understood. In this study, we estimated the annual cost savings accruing to the Canadian healthcare system in association with reductions in T2D and CVD rates, separately, following increased intakes of dietary fiber by adults. Methods: A three-step cost-of-illness analysis was conducted to identify the percentage of individuals expected to consume fiber-rich diets in Canada, estimate increased fiber intakes in relation to T2D and CVD reduction rates, and independently assess the potential annual savings in healthcare costs associated with the reductions in rates of these two epidemics. The economic model employed a sensitivity analysis of four scenarios (universal, optimistic, pessimistic, and very pessimistic) to cover a range of assumptions within each step. Results: Non-trivial healthcare and related savings of CAD$35.9-$718.8 million in T2D costs and CAD$64.8 million–$1.3 billion in CVD costs were calculated under a scenario where cereal fiber was used to increase current intakes of dietary fiber to the recommended levels of 38 g per day for men and 25 g per day for women. Each 1 g per day increase in fiber consumption resulted in annual CAD$2.6 to $51.1 million savings for T2D and $4.6 to $92.1 million savings for CVD. Conclusion: Findings of this analysis shed light on the economic value of optimal dietary fiber intakes. Strategies to increase consumers’ general knowledge of the recommended intakes of dietary fiber, as part of healthy diet, and to facilitate stakeholder synergy are warranted to enable better management of healthcare and related costs associated with T2D and CVD in Canada. PMID

A Review of Last Mile Logistics Innovations in an Externalities Cost Reduction Vision

Directory of Open Access Journals (Sweden)

Luigi Ranieri

2018-03-01

Full Text Available In this paper, a review of the recent scientific literature contributions on innovative strategies for last mile logistics, focusing on externalities cost reduction, is presented. Transport is causing problems in urban areas, in particular in freight transport: modern cities need solutions to reduce externalities costs such as congestion, pollution and others, which have increased in the last few years, especially due to the growth of goods delivery. Online sales and globalization lead to new trends in freight transport, and moreover, a larger quantity of goods is expected to be delivered in the next future. In this context, most of the delivered goods end up in the city centers. Last mile logistics is the least efficient stage of the supply chain and comprises up to 28% of the total delivery cost. Therefore, the improvement of last mile logistics and a significant externalities reduction are very important challenges for researchers. New technologies and transport means, innovative techniques and organizational strategies allow handling in a more effective way the last mile delivery in urban areas. Based on the Systematic Literature Review (SLR method, recent papers that significantly contributed, with original proposals, to the reduction of externalities in urban logistics are identified and analyzed in this work. Furthermore, a classification of the papers dealing with the externality reduction problem is presented. It is consistent with a general formulation proposed to evaluate external costs in urban area. The innovative contributions are classified into five main categories: innovative vehicles, proximity stations or points, collaborative and cooperative urban logistics, optimization of transport management and routing, innovations in public policies and infrastructures. The new paradigm of smart logistics is based on the combination of these concepts and on the proposed innovations.

A probabilistic production costing analysis of SO2 emissions reduction strategies for Ohio: emissions, costs and employment tradeoffs

International Nuclear Information System (INIS)

Heslin, J.S.; Hobbs, B.F.

1991-01-01

A new approach for state- and utility-level analysis of the cost and regional economic impacts of strategies for reducing utility SO 2 emissions is summarized and applied to Ohio. The methodology is based upon probabilistic production costing and economic input-output analysis. It is an improvement over previous approaches because it: (1) accurately models random outages of generating units, 'must-run' constraints on unit output, and the distribution of power demands; and (2) runs quickly on a microcomputer and yet considers the entire range of potential control strategies from a systems perspective. The input-output analysis considers not only the economic effects of utility fuel use and capital investment, but also those of increased electric rates. Two distinct strategies are found to be most attractive for Ohio. The first, more flexible one, consists of emissions dispatching (ED) alone to meet short run emissions reduction targets. A 75 percent reduction can then be achieved by the turn of the century by combining ED and fuel switching (FS) with flue gas desulfurization, limestone injection multistage burners, and physical coal cleaning at selected plants. The second is a scrubber-based strategy which includes ED. By the year 2000, energy conservation becomes a cost effective component of these strategies. In order to minimize compliance costs, acid rain legislation which facilitates emission trading and places regional tonnage limits on emissions is desirable

Cost reduction and safety design features of new nuclear power plants in India. Annex 13

International Nuclear Information System (INIS)

Sharma, V.K.

2002-01-01

Indian Nuclear Power Programme is designed to exploit limited reserves of uranium and extensive resource of thorium. Pressurised heavy water reactors are found most suitable and form the main stay of the first stage of the programme. Thorium utilisation is achieved in the second and third stages. Today India has total installed capacity of 2720 MWe of PHWRs which are operating with high plant load factors of over 80%. Rich experience of construction and operation of over 150 reactor years is being utilised in effecting cost reduction and safety improvements. Standardisation and reduction in gestation period by preproject activities, advance procurement and work packages of engineer, procure, construct and commission are some of the techniques being adopted for cost reduction in the new projects. But the cost of safety is rising. Design basis event of double ended guillotine rupture of primary pressure boundary needs a relook based on current knowledge of material behaviour. This event appears improbable. Similarly some of the safety related systems like closed loop cooling water operating at low temperature and pressure, and low usage factors may be designed as per standard codes without invoking special nuclear requirements. The paper will address these issues and highlight the possible areas for cost reduction both in operating and safety systems. Modern construction and project management techniques are being employed. Gestation period of 5 years and cost of less than US $1400 per KWe are the present targets. In Indian environment nuclear power is found to be competitive with thermal power plants at distances of about 800 Kms from the coal mines. (author)

Cost-effectiveness analysis of risk reduction at nuclear power plants: What have we learned from experience

International Nuclear Information System (INIS)

Lochard, J.; Pages, P.

1984-01-01

Within the field of risk management techniques, cost-effectiveness analysis of risk reduction is now recognized as an adequate method for evaluating and defining the optimal allocation of protection and safety resources within large industrial systems. The paper considers some of the issues that arise in connection with cost-effectiveness analysis of risk reduction at nuclear power stations. Particular attention is called to both the interdependence between criteria that characterize risk reduction problems and the resulting aggregation and weighting procedures needed when the multidimensionality of criteria is explicitly taken into account. The discussion of these problems is illustrated with results of case studies on both public and occupational risk reduction at French PWRs during normal operation. (author)

Cost reduction for large turbine generator Pedestal in high seismic zone

International Nuclear Information System (INIS)

Sawhney, P.S.; Irani, P.; Pusheck, B.N.

1985-01-01

Turbine Generator Pedestals have generally been designed using reinforced concrete. For present day large turbine generators (1100 MWe class and above) with tall (about 80 feet) pedestals, the amount of reinforcing steel becomes quite large, especially for plants in high seismic zones. With the prime objective of cost reduction, an approach using steel/concrete composite design has been studied for a large BWR Turbine Generator pedestal with 0.3g peak ground acceleration. Large prefabricated steel modules were adopted for composite design and simplified construction. Design was based on the ACI and AISC codes. Costs and schedules were developed and compared with those for a conventionally designed reinforced concrete pedestal. Composite design was found to give considerable cost and schedule advantage over the conventional reinforced concrete design

Risk management study for the Hanford Site facilities: Risk reduction cost comparison for the retired Hanford Site facilities. Volume 4

Energy Technology Data Exchange (ETDEWEB)

Coles, G.A.; Egge, R.G.; Senger, E.; Shultz, M.W.; Taylor, W.E.

1994-02-01

This document provides a cost-comparison evaluation for implementing certain risk-reduction measures and their effect on the overall risk of the 100 and 200 Area retired, surplus facilities. The evaluation is based on conditions that existed at the time the risk evaluation team performed facility investigations, and does not acknowledge risk-reduction measures that occurred soon after risk identification. This evaluation is one part of an overall risk management study for these facilities. The retired facilities investigated for this evaluation are located in the 100 and 200 Areas of the 1450-km{sup 2} Hanford Site. The Hanford Site is a semiarid tract of land in southeastern Washington State. The nearest population center is Richland, Washington, (population 32,000) 30 km southeast of the 200 Area. This cost-comparison evaluation (1) determines relative costs for reducing risk to acceptable levels; (2) compares the cost of reducing risk using different risk-reduction options; and (3) compares the cost of reducing risks at different facilities. The result is an identification of the cost effective risk-reduction measures. Supporting information required to develop costs of the various risk-reduction options also is included.

Cost effectiveness of a screen-and-treat program for asymptomatic vaginal infections in pregnancy: towards a significant reduction in the costs of prematurity.

Science.gov (United States)

Kiss, H; Pichler, Eva; Petricevic, L; Husslein, P

2006-08-01

The purpose of this investigation was to determine the cost-saving potential of a simple screen-and-treat program for vaginal infection, which has previously been shown to lead to a reduction of 50% in the rate of preterm births. To determine the potential cost savings, we compared the direct costs of preterm delivery of infants with a birth weight below 1900g with the costs of the screen-and-treat program. We used a cut-off birth weight of 1900g because, in our population, all infants with a birth weight below 1900g were transferred to the neonatal intensive care unit. The direct costs associated with preterm delivery were defined to include the costs of the initial hospitalization of both mother and infant and the costs of outpatient follow-up throughout the first 6 years of life of the former preterm infant. The costs of the screen-and-treat program were defined to include the costs of the screening examination and the resulting costs of antimicrobial treatment and follow-up. All calculations were based on health-economic data obtained in the metropolitan area of Vienna, Austria. The number of preterm infants with a birth weight below 1900g was 12 (0.5%) in the intervention group (N=2058) and 29 (1.3%) in the control group (N=2097). The direct costs per preterm birth were found to amount to EUR (euro) 60262. Overall, the expected total savings in direct costs achieved by the screen-and-treat program and the ensuing 50% reduction in the number preterm births with a birth weight below 1900g amounted to more than euro 11 million. The costs of screening and treatment were found to amount to merely 7% of the direct costs saved as a result of the screen-and-treat program. A simple preterm prevention program, consisting of screening and antimicrobial treatment and follow-up of women with asymptomatic vaginal infection, leads not only to a significant reduction in the rate of preterm births but also to substantial savings in the direct costs associated with prematurity.

48 CFR 52.215-10 - Price Reduction for Defective Certified Cost or Pricing Data.

Science.gov (United States)

2010-10-01

... Defective Certified Cost or Pricing Data. 52.215-10 Section 52.215-10 Federal Acquisition Regulations System... Text of Provisions and Clauses 52.215-10 Price Reduction for Defective Certified Cost or Pricing Data... or Pricing Data (OCT 2010) (a) If any price, including profit or fee, negotiated in connection with...

The Impact of Accounting Methods on Cost Reduction Rates in Defense Aerospace Weapons System Programs

Science.gov (United States)

1988-12-01

and adhered to in U.S. industry, allow some flexibility in accounting. Under GAAP , accounting areas such as depreciation , inventory, investment tax... depreciation , inventory and investment tax credit) in predicting cost reduction rates are studied. Of the three accounting variables, only inventory...RATES .. ................. ........... 5 1. Depreciation ........ ............... 6 2. Capitalizing or Expensing of Costs . . .. 6 3. Material Costs

A COST-REDUCTION OF SELF-COMPACTING CONCRETE INCORPORATING RAW RICE HUSK ASH

Directory of Open Access Journals (Sweden)

H. AWANG

2016-01-01

Full Text Available The higher material cost of self-compacting concrete (SCC as compared to normal vibrated concrete is mainly due to its higher cement content. In order to produce economical SCC, a significant amount of cement should be replaced with cheaper material options, which are commonly found in byproduct materials such as limestone powder (LP, fly ash (FA and raw rice husk ash (RRHA. However, the use of these byproduct materials to replace the high volumes of cement in an SCC mixture will produce deleterious effects such as strength reduction. Thus, the objective of this paper is to investigate the optimum SCC mixture proportioning capable of minimizing SCC’s material cost. A total of fifteen mixes were prepared. This study showed that raw rice husk ash exhibited positive correlations with fly ash and fine limestone powder and were able to produce high compressive and comparable to normal concrete. The SCC-mix made with quaternary cement-blend comprising OPC/LP/FA/RRHA at 55/15/15/15 weight percentage ratio is found to be capable of maximizing SCC’s material-cost reduction to almost 19% as compared with the control mix

Cost-Effectiveness Analysis of Surface Flow Constructed Wetlands (SFCW) for Nutrient Reduction in Drainage Discharge from Agricultural Fields in Denmark.

Science.gov (United States)

Gachango, F G; Pedersen, S M; Kjaergaard, C

2015-12-01

Constructed wetlands have been proposed as cost-effective and more targeted technologies in the reduction of nitrogen and phosphorous water pollution in drainage losses from agricultural fields in Denmark. Using two pig farms and one dairy farm situated in a pumped lowland catchment as case studies, this paper explores the feasibility of implementing surface flow constructed wetlands (SFCW) based on their cost effectiveness. Sensitivity analysis is conducted by varying the cost elements of the wetlands in order to establish the most cost-effective scenario and a comparison with the existing nutrients reduction measures carried out. The analyses show that the cost effectiveness of the SFCW is higher in the drainage catchments with higher nutrient loads. The range of the cost effectiveness ratio on nitrogen reduction differs distinctively with that of catch crop measure. The study concludes that SFCW could be a better optimal nutrients reduction measure in drainage catchments characterized with higher nutrient loads.

Supplier’s Joint Investments in Cost Reduction and Quality Improvement in a Decentralized Supply Chain

Directory of Open Access Journals (Sweden)

Hengyun Zhang

2017-01-01

Full Text Available We consider a decentralized supply chain with a downstream manufacturer and an upstream supplier. The upstream supplier sells a product to the manufacturer, who faces a quality and price sensitive demand. The supplier has a chance to invest in both cost reduction and quality improvement of its product. We derive the optimal investment and pricing decisions for the supply chain members. We do so in both the centralized and the decentralized supply chains. We show that the optimal investment and pricing decisions in the decentralized supply chain may deviate from that in the centralized supply chain. We develop a mechanism to coordinate the decentralized supply chain. The developed mechanism contains four policies: wholesale price, sharing of revenue, sharing of cost reduction investment cost, and sharing of quality improvement investment cost. We also show that the developed coordination mechanism can lead to Pareto improvement.

Perceptions of managers regarding supply chain cost reduction in the South African mobile phone industry

Directory of Open Access Journals (Sweden)

Musenga F. Mpwanya

2015-06-01

Full Text Available Background: Many industries, including the mobile phone industry, experience a surge in supply chain (SC costs in the provision of products and services to their customers. Despite this, only a few studies have been conducted on SC cost reduction in South Africa and globally. Objective: This study seeks to understand the perceptions of managers regarding cost reduction in the South African mobile phone SC. Method: A qualitative case study was conducted, involving eight willing managers and using semi-structured interviews, observation and documents. Interviews transcripts were analysed thematically with the help of Atlas.ti and a threefold process was followed, comprising data reduction, data display and data interpretation and conclusion drawing. Results: The findings suggest that mobile phone companies should consolidate their strategic relationships and be efficient, in order to effectively reduce costs in the South African mobile phone SC. To achieve this, whilst South African mobile network operators have to share more and more infrastructure and outsource their operations, other mobile phone companies should re-engineer their operational processes and their reduce costs across the SC. Conclusion: The knowledge generated from this study should assist South African mobile phone companies to reduce their SC costs and address high-priced mobile services. On the other hand, this study should assist regulating authorities (the Department of Communications and the Independent Communication Authority of South Africa to gain insights into the challenges faced by the mobile phone industry in South Africa and, therefore, to make appropriate and adequate mobile telecommunication policies.

A sensitivity analysis of timing and costs of greenhouse gas emission reductions

NARCIS (Netherlands)

Gerlagh, R.; van der Zwaan, B.C.C.

2004-01-01

This paper analyses the optimal timing and macro-economic costs of carbon emission reductions that mitigate the global average atmospheric temperature increase. We use a macro-economic model in which there are two competing energy sources, fossil-fuelled and non-fossil-fuelled. Technological change

Simulating greenhouse gas (GHG) allowance cost and GHG emission reduction in Western Europe

International Nuclear Information System (INIS)

Delarue, Erik; Lamberts, Hans; D'haeseleer, William

2007-01-01

Due to the growing concern for global warming, the EU25 have implemented the European Union Greenhouse Gas Emission Trading Scheme (EU ETS). In the first trading period (2005-2007), part of the targeted GHG emission reductions presumably will have to result from a switch from coal fired electricity generation to gas fired electricity generation. It is possible to calculate the allowance cost necessary to switch a certain coal fired plant with a certain gas fired plant in the merit order. The allowance cost obtained is a so called switching point. When comparing historic European Union Allowance (EUA) prices (2005) with the corresponding historic switching points, the EUA prices were found high enough to cause a certain switch in the summer season. This finding leads to the use of switching points in establishing allowance cost profiles for several scenarios. A variable gas price profile is used in the simulation tool E-Simulate to simulate electricity generation and related GHG emissions in an eight zonal model representing Western Europe. Several GHG allowance cost profile scenarios are examined. For each scenario, electricity generation in the considered countries is clarified. The focus however lies on the GHG emission reduction potentials. These potentials are addressed for each scenario

Costs of certified emission reductions under the Clean Development Mechanism of the Kyoto Protocol

International Nuclear Information System (INIS)

Rahman, Shaikh M.; Kirkman, Grant A.

2015-01-01

This paper examines the cost structure of certified emission reductions (CERs) through various types of projects under the Clean Development Mechanism (CDM) of the Kyoto Protocol. Using the CDM project data, the costs of CERs and their variation across technology and over time and space are estimated by applying alternative functional forms and specifications. Results show that the average cost of CERs decreases with the project scale and duration, scale and duration effects significantly vary across project types, and there is an upward trend in costs. The results also show that the distribution of the projects in the CDM portfolio or a given location does not strictly follow the relative cost structure, nor does the distribution of the CDM projects in different host countries follow the principle of comparative advantage. More than 84% of the CDM portfolio consists of various energy projects with substantially higher costs of CERs than afforestation and reforestation, industrial and landfill gas reduction, and methane avoidance projects, which are only 12% of all projects. While per unit cost of abatement plays an important role in the bottom-up and top-down models to evaluate emission reduction potential and analyze policy alternatives, the findings contradict the presumption of such models that project investors seek out low-cost opportunities. At the aggregate level, the cost of CER by the projects in Asia and Europe is similar but higher than those hosted in Africa, Americas, and Oceania. Yet more than 83% of the projects in the CDM portfolio are located in Asia; more than 69% of the projects are in China and India alone. China appears to have a comparative advantage (i.e., lowest opportunity cost) in energy efficiency projects, while India has a comparative advantage in hydro power projects and Brazil has a comparative advantage in wind power projects. In contrast, energy efficiency category accounts for only 8% of the CDM projects in China, hydro power

COMPARISON OF WEST GERMAN AND U.S. FLUE GAS DESULFURIZATION AND SELECTIVE CATALYTIC REDUCTION COSTS

Science.gov (United States)

The report documents a comparison of the actual cost retrofitting flue gas desulfurization (FGD) and selective catalytic reduction (SCR) on Federal Republic of German (FRG) boilers to cost estimating procedures used in the U.S. to estimate the retrofit of these controls on U.S. b...

Cost-Effectiveness of Emission Reduction for the Indonesian Coal-Fired Power Plants

NARCIS (Netherlands)

Handayani, Kamia; Krozer, Yoram

2014-01-01

This paper presents the result of research on the cost-effectiveness of emission reduction in the selected coal-fired power plants (CFPPs) in Indonesia. The background of this research is the trend of more stringent environmental regulation regarding air emission from coal-fired power plants (CFPPs)

Elimination of maintenance outage and cost reduction by development of outage-free maintenance techniques

International Nuclear Information System (INIS)

Jakabe, Hideo; Maruyama, Yoshinaga

1996-01-01

The development program of KEPCO on outage-free maintenance techniques for distribution line work since 1984 is overviewed. It has succeeded in eliminating maintenance outages since 1989. The original aim was to improve customer satisfaction. However, in all, four benefits were realised through the development. These are cost reduction, securing of worker safety, improvement of customer service, and advancement of distribution techniques and morale in KEPCO. The introduction of robotic techniques for maintenance work and manipulator techniques for repair work is planned for further modernization. These new techniques are helping in both work safety and work efficiency improvement. Cost reduction and advancement of distribution line work techniques is also considered. (R.P.)

Quantifying costs and benefits of integrated environmental strategies of air quality management and greenhouse gas reduction in the Seoul Metropolitan Area

Energy Technology Data Exchange (ETDEWEB)

Chae, Yeora, E-mail: yrchae@kei.re.kr [Korea Environment Institute, 290 Jinheungno, Eunpyeong-Gu, Seoul 122-706 (Korea, Republic of); Park, Jeongim [Department of Environmental Health Science, Soonchunhyang University, Asan, Chungnam 336-745 (Korea, Republic of)

2011-09-15

This study quantifies the costs and benefits of Integrated Environmental Strategies (IES) of reducing air pollutants and greenhouse gas (GHG) emissions at a minimal cost in the Seoul Metropolitan Area (SMPA) for the year 2014 and compares with current air quality management plans and greenhouse gas (GHG) mitigation plans. The results estimated health benefits from prevention of premature mortality under the IES scenario as 14 trillion Korean won (won) and associated cost as -3.6 trillion won, yielding total benefit, difference of benefits and costs, of 18 trillion won. With the inclusion of benefits from GHG reductions, the total benefits result in 147 trillion won. The difference of human health benefits and costs of air quality management plan and GHG reduction strategies result in 14 trillion won and 8 trillion won, respectively. The research shows that benefits of integrating air quality management and GHG reduction measures are greater than those obtained by air quality management and GHG reduction measures individually. - Highlights: > The costs and benefits of Integrated Environmental Strategies (IES) are quantified.> Benefit under IES is 14 trillion Korean won and cost is -3.6 trillion won.> Benefit of air quality management is 14 trillion won and cost is -0.3 trillion won.> Benefit under GHG reduction is 1.5 trillion won and cost is -6.4 trillion won.> Benefits of IES are greater than those obtained by each measure individually.

Cost-Effectiveness of Emissions Reduction through Vehicle Repair Compared to CNG Conversion.

Science.gov (United States)

Guenther, Paul L; Lesko, Jon M; Stedman, Donald H

1996-10-01

In return for a temporary waiver from converting five vehicles to operate on compressed natural gas (CNG) for the Denver Clean Fuels program, the University of Denver identified, tested, repaired, and retested nine employee commuter vehicles. The results of the study validated the concept that employer-based identification and repair programs can be carried out in a cost-effective way. On average, each repaired vehicle removed fifty times more carbon monoxide (CO) emissions from Denver air than each CNG conversion. The average cost of each repair was eight times less than the average cost of each conversion. The average fuel economy benefit from the repairs was enough to pay for the average cost of repairs in less than three years of normal driving. When the expected lifetimes of repairs and conversions are included, the targeted repair program appears to be over sixty times more cost-effective as a CO emissions reduction strategy than CNG conversion.

Pursuing Photovoltaic Cost-Effectiveness

DEFF Research Database (Denmark)

Yang, Yongheng; Koutroulis, Eftichios; Sangwongwanich, Ariya

2017-01-01

loading of the power devices. However, its feasibility is challenged by the associated energy losses. An increase of the inverter lifetime and a reduction of the energy yield can alter the cost of energy, demanding an optimization of the power limitation. Therefore, aiming at minimizing the Levelized Cost...... be flexibly performed. As an advanced control strategy, the Absolute Active Power Control (AAPC) can effectively solve the overloading issues by limiting the maximum possible PV power to a certain level (i.e., the power limitation), and also benefit the inverter reliability due to the reduction in the thermal...... performance in terms of LCOE and energy production can be obtained by enabling the AAPC strategy, compared to the conventional PV inverter operating only in the maximum power point tracking mode. In the presented case study, the minimum of the LCOE is achieved for the PV system when the power limit...

Analyses on Cost Reduction and CO2 Mitigation by Penetration of Fuel Cells to Residential Houses

Science.gov (United States)

Aki, Hirohisa; Yamamoto, Shigeo; Kondoh, Junji; Murata, Akinobu; Ishii, Itaru; Maeda, Tetsuhiko

This paper presents analyses on the penetration of polymer electrolyte fuel cells (PEFC) into a group of 10 residential houses and its effects of CO2 emission mitigation and consumers’ cost reduction in next 30 years. The price is considered to be reduced as the penetration progress which is expected to begin in near future. An experimental curve is assumed to express the decrease of the price. Installation of energy interchange systems which involve electricity, gas and hydrogen between a house which has a FC and contiguous houses is assumed to utilize both electricity and heat more efficiently, and to avoid start-stop operation of fuel processor (reformer) as much as possible. A multi-objective model which considers CO2 mitigation and consumers’ cost reduction is constructed and provided a Pareto optimum solution. A solution which simultaneously realizes both CO2 mitigation and consumers’ cost reduction appeared in the Pareto optimum solution. Strategies to reduce CO2 emission and consumers’ cost are suggested from the results of the analyses. The analyses also revealed that the energy interchange systems are effective especially in the early stage of the penetration.

The importance of capital cost reduction in improving nuclear economics

International Nuclear Information System (INIS)

Langmo, A.; Braun, C.

1996-01-01

In the developed countries having existing nuclear programs, the situation necessitates lower total power generation cost. The restructuring of utility industry due to the deregulation causes to reorganize the ownership of some nuclear plants, and the overall economics of nuclear plants in relation to their local competition is reexamined. The reluctance to make any new long term capital cost commitment arises, and it makes new plant construction less likely in near future, and plant upgrading and improvement to be put to intense scrutiny. The capital cost recovery in existing nuclear plants in USA is discussed. It is important to recognize that there is very little that can be done to affect already expended capital, and only that can be done is to improve plant capacity factors, besides write-off. The roles of architects and engineers in improved plant economics are now evaluated by the various organizations which are interested in the participation in new nuclear industry reorganization and restructuring. The reduction of operation and maintenance costs and capital investment, and the improvement of capacity factor are reported. In new ALWR construction program, architects and engineers can significantly support the control of plant capital costs by the selection of the plant design and the sites, and the strategies of procurement and contract, construction schedule and others. (K.I.)

APHiD: Hierarchical Task Placement to Enable a Tapered Fat Tree Topology for Lower Power and Cost in HPC Networks

Energy Technology Data Exchange (ETDEWEB)

Michelogiannakis, George; Ibrahim, Khaled Z.; Shalf, John; Wilke, Jeremiah J.; Knight, Samuel; Kenny, Joseph P.

2017-05-14

The power and procurement cost of bandwidth in system-wide networks has forced a steady drop in the byte/flop ratio. This trend of computation becoming faster relative to the network is expected to hold. In this paper, we explore how cost-oriented task placement enables reducing the cost of system-wide networks by enabling high performance even on tapered topologies where more bandwidth is provisioned at lower levels. We describe APHiD, an efficient hierarchical placement algorithm that uses new techniques to improve the quality of heuristic solutions and reduces the demand on high-level, expensive bandwidth in hierarchical topologies. We apply APHiD to a tapered fat-tree, demonstrating that APHiD maintains application scalability even for severely tapered network configurations. Using simulation, we show that for tapered networks APHiD improves performance by more than 50% over random placement and even 15% in some cases over costlier, state-of-the-art placement algorithms.

Cost-effectiveness analysis of surface flow constructed wetlands (SFCW) for nutrient reduction in drainage discharge from agricultural fields in Denmark

DEFF Research Database (Denmark)

Gachango, Florence Gathoni; Pedersen, Søren Marcus; Kjærgaard, Charlotte

2015-01-01

Constructed wetlands have been proposed as cost-effective and more targeted technologies in the reduction of nitrogen and phosphorous water pollution in drainage losses from agricultural fields in Denmark. Using two pig farms and one dairy farm situated in a pumped lowland catchment as case studies......, this paper explores the feasibility of implementing surface flow constructed wetlands (SFCW) based on their cost effectiveness. Sensitivity analysis is conducted by varying the cost elements of the wetlands in order to establish the most cost-effective scenario and a comparison with the existing nutrients...... reduction measures carried out. The analyses show that the cost effectiveness of the SFCW is higher in the drainage catchments with higher nutrient loads. The range of the cost effectiveness ratio on nitrogen reduction differs distinctively with that of catch crop measure. The study concludes that SFCW...

Soft-copy sonography: cost reduction sensitivity analysis in a pediatric hospital.

Science.gov (United States)

Don, S; Albertina, M J; Ammann, D

1998-03-01

Our objective was to determine whether interpreting sonograms of pediatric patients using soft-copy (computer workstation) instead of laser-printed film could reduce costs for a pediatric radiology department. We used theoretic models of growth to analyze costs. The costs of a sonographic picture archiving and communication system (three interface devices, two workstations, a network server, maintenance expenses, and storage media costs) were compared with the potential savings of eliminating film and increasing technologist efficiency or reducing the number of technologists. The model was based on historic trends and future capitation estimates that will reduce fee-for-service reimbursement. The effects of varying the study volume and reducing technologists' work hours were analyzed. By converting to soft-copy interpretation, we saved 6 min 32 sec per examination by eliminating film processing waiting time, thus reducing examination time from 30 min to 24 min. During an average day of 27 examinations, 176 min were saved. However, 33 min a day were spent retrieving prior studies from long-term storage; thus, 143 extra minutes a day were available for scanning. This improved efficiency could result in five more sonograms a day obtained by converting to soft-copy interpretation, using existing staff and equipment. Alternatively, five examinations a day would equate to one half of a full-time equivalent technologists position. Our analysis of costs considered that the hospital's anticipated growth of sonography and the depreciation of equipment during 5 years resulted in a savings of more than $606,000. Increasing the examinations by just 200 sonograms in the first year and no further growth resulted in a savings of more than $96,000. If the number of sonograms stayed constant, elimination of film printing alone resulted in a loss of approximately $157,000; reduction of one half of a full-time equivalent technologist's position would recuperate approximately $134

Quantifying costs and benefits of integrated environmental strategies of air quality management and greenhouse gas reduction in the Seoul Metropolitan Area

International Nuclear Information System (INIS)

Chae, Yeora; Park, Jeongim

2011-01-01

This study quantifies the costs and benefits of Integrated Environmental Strategies (IES) of reducing air pollutants and greenhouse gas (GHG) emissions at a minimal cost in the Seoul Metropolitan Area (SMPA) for the year 2014 and compares with current air quality management plans and greenhouse gas (GHG) mitigation plans. The results estimated health benefits from prevention of premature mortality under the IES scenario as 14 trillion Korean won (won) and associated cost as -3.6 trillion won, yielding total benefit, difference of benefits and costs, of 18 trillion won. With the inclusion of benefits from GHG reductions, the total benefits result in 147 trillion won. The difference of human health benefits and costs of air quality management plan and GHG reduction strategies result in 14 trillion won and 8 trillion won, respectively. The research shows that benefits of integrating air quality management and GHG reduction measures are greater than those obtained by air quality management and GHG reduction measures individually. - Highlights: → The costs and benefits of Integrated Environmental Strategies (IES) are quantified.→ Benefit under IES is 14 trillion Korean won and cost is -3.6 trillion won.→ Benefit of air quality management is 14 trillion won and cost is -0.3 trillion won.→ Benefit under GHG reduction is 1.5 trillion won and cost is -6.4 trillion won.→ Benefits of IES are greater than those obtained by each measure individually.

Cost-effectiveness analysis of cochlear dose reduction by proton beam therapy for medulloblastoma in childhood

International Nuclear Information System (INIS)

Hirano, Emi; Kawabuchi, Koichi; Fuji, Hiroshi; Onoe, Tsuyoshi; Kumar, Vinay; Shirato, Hiroki

2014-01-01

The aim of this study is to evaluate the cost-effectiveness of proton beam therapy with cochlear dose reduction compared with conventional X-ray radiotherapy for medulloblastoma in childhood. We developed a Markov model to describe health states of 6-year-old children with medulloblastoma after treatment with proton or X-ray radiotherapy. The risks of hearing loss were calculated on cochlear dose for each treatment. Three types of health-related quality of life (HRQOL) of EQ-5D, HUI3 and SF-6D were used for estimation of quality-adjusted life years (QALYs). The incremental cost-effectiveness ratio (ICER) for proton beam therapy compared with X-ray radiotherapy was calculated for each HRQOL. Sensitivity analyses were performed to model uncertainty in these parameters. The ICER for EQ-5D, HUI3 and SF-6D were $21 716/QALY, $11 773/QALY, and $20 150/QALY, respectively. One-way sensitivity analyses found that the results were sensitive to discount rate, the risk of hearing loss after proton therapy, and costs of proton irradiation. Cost-effectiveness acceptability curve analysis revealed a 99% probability of proton therapy being cost effective at a societal willingness-to-pay value. Proton beam therapy with cochlear dose reduction improves health outcomes at a cost that is within the acceptable cost-effectiveness range from the payer's standpoint. (author)

Potential Cost Savings From Reduction of Regional Variation in Medicare Spending

Directory of Open Access Journals (Sweden)

Yunjie Song

2016-04-01

Full Text Available Potential cost savings estimated from reduction of regional variation in Medicare spending are considerable but questioned. This article evaluates the validity of the principal methods that have been used in the estimations of the potential savings. Three estimation approaches were identified. The first approach uses adjusted expenditures to calculate avoidable costs, but adjusted expenditures can be independent of avoidable costs, and measurement errors are not controlled. The second approach uses an outcome variable to replace its causal factors, and is not acceptable because the association between the outcomes and the causes is untestable. The final approach uses surveys to directly measure physician beliefs and patient preferences, but the sole study using this approach is weakened by sample selection biases and incomplete controls. A development of reliable measures and a switch of observation from clinic settings to geographic contexts could make the estimations more convincing.

Pipeline cost reduction through effective project management and applied technology

Energy Technology Data Exchange (ETDEWEB)

Jenkins, A. [TransCanada Pipeline Ltd., Alberta (Canada); Babuk, T. [Empress International Inc., Westwood, NJ (United States); Mohitpour, M. [Tempsys Pipeline Solutions Inc., Vancouver, BC (Canada); Murray, M.A. [National Energy Board of Canada (Canada)

2005-07-01

Pipelines are regarded by many as passive structures with the technology involved in their construction and operation being viewed as relatively simple and stable. If such is the case how can there be much room for cost improvement? In reality, there have been many technological and regulatory innovations required within the pipeline industry to meet the challenges posed by ever increasing consumer demand for hydrocarbons, the effects of aging infrastructure and a need to control operating and maintenance expenditures. The importance of technology management, as a subset of overall project management, is a key element of life cycle cost control. Assurance of public safety and the integrity of the system are other key elements in ensuring a successful pipeline project. The essentials of best practise project management from an owner/ operator's perspective are set out in the paper. Particular attention is paid to the appropriate introduction of new technology, strategic procurement practice and material selection, indicating that capital cost savings of up to 15% are achievable without harming life cycle cost. The value of partnering leading to technical innovation, cost savings and improved profitability for all the participants is described. Partnering also helps avoid duplicated effort through the use of common tools for design, planning schedule tracking and reporting. Investing in appropriate technology development has been a major source of cost reduction in recent years and the impact of a number of these recently introduced technologies in the areas of materials, construction processes and operation and maintenance are discussed in the paper. (author)

Heliostat cost reduction study.

Energy Technology Data Exchange (ETDEWEB)

Jones, Scott A.; Lumia, Ronald. (University of New Mexico, Albuquerque, NM); Davenport, Roger (Science Applications International Corporation, San Diego, CA); Thomas, Robert C. (Advanced Thermal Systems, Centennial, CO); Gorman, David (Advanced Thermal Systems, Larkspur, CO); Kolb, Gregory J.; Donnelly, Matthew W.

2007-06-01

Power towers are capable of producing solar-generated electricity and hydrogen on a large scale. Heliostats are the most important cost element of a solar power tower plant. Since they constitute {approx} 50% of the capital cost of the plant it is important to reduce heliostat cost as much as possible to improve the economic performance of power towers. In this study we evaluate current heliostat technology and estimate a price of $126/m{sup 2} given year-2006 materials and labor costs for a deployment of {approx}600 MW of power towers per year. This 2006 price yields electricity at $0.067/kWh and hydrogen at $3.20/kg. We propose research and development that should ultimately lead to a price as low as $90/m{sup 2}, which equates to $0.056/kWh and $2.75/kg H{sup 2}. Approximately 30 heliostat and manufacturing experts from the United States, Europe, and Australia contributed to the content of this report during two separate workshops conducted at the National Solar Thermal Test Facility.

Cost reductions for offshore wind power. Exploring the balance between scaling, learning and R and D

International Nuclear Information System (INIS)

Van der Zwaan, B.; Rivera-Tinoco, R.; Lensink, S.; Van den Oosterkamp, P.

2012-01-01

Offshore wind electricity generation is prospected to increase substantially in the near future at a number of locations, like in the Baltic, Irish and North Sea, and emerge at several others. The global growth of offshore wind technology is likely to be accompanied by reductions in wind park construction costs, both as a result of scaling and learning effects. Since 2005, however, significant cost increases have been observed. A recent surge in commodity prices proves to constitute one of the main drivers of these cost increases. This observation begs the question whether wind turbine manufacturers should return to the laboratory for undertaking R and D that explores the use of alternative materials and bring offshore wind energy closer to competitiveness. It is demonstrated that if one abstracts from material price fluctuations, in particular for metals such as copper and steel, turbine production plus installation cost data publicly available for a series of offshore wind park projects (realized in several European countries since the 1990's) show a cost reduction trend. Hence various other sources of cost increases, such as due to the progressively larger distances from the shore (and correspondingly greater depths at sea) at which wind parks have been (and will be) built, are outshadowed by cost reduction effects. When one expresses the overall cost development for offshore wind energy capacity as an experience curve, a learning rate is found of 3%, which reflects a mixture of economies-of-scale and learning-by-doing mechanisms. Also the impact is quantified on offshore wind power construction costs from the recent tightness in the market for turbine manufacturing and installation services: without the demand-supply response inertia at the origin of this tightness it is estimated that the learning rate would be 5%. Since these learning rates are relatively low - in comparison to those observed for other technologies, and in view of the high current capacity

A Spatial-Economic Cost-Reduction Pathway Analysis for U.S. Offshore Wind Energy Development from 2015-2030

Energy Technology Data Exchange (ETDEWEB)

Beiter, Philipp; Stehly, Tyler

2016-10-05

The potential for cost reduction and economic viability for offshore wind varies considerably within the United States. This analysis models the cost impact of a range of offshore wind locational cost variables across more than 7,000 potential coastal sites in the United States' offshore wind resource area. It also assesses the impact of over 50 technology innovations on potential future costs between 2015 and 2027 (Commercial Operation Date) for both fixed-bottom and floating wind systems. Comparing these costs to an initial assessment of local avoided generating costs, this analysis provides a framework for estimating the economic potential for offshore wind. Analyzing economic potential within this framework can help establish a refined understanding across industries of the technology and site-specific risks and opportunities associated with future offshore wind development. The findings from the original report indicate that under the modeled scenario, offshore wind can be expected to achieve significant cost reductions and may approach economic viability in some parts of the United States within the next 15 years.

Cost-effective policy instruments for greenhouse gas emission reduction and fossil fuel substitution through bioenergy production in Austria

International Nuclear Information System (INIS)

Schmidt, Johannes; Leduc, Sylvain; Dotzauer, Erik; Schmid, Erwin

2011-01-01

Climate change mitigation and security of energy supply are important targets of Austrian energy policy. Bioenergy production based on resources from agriculture and forestry is an important option for attaining these targets. To increase the share of bioenergy in the energy supply, supporting policy instruments are necessary. The cost-effectiveness of these instruments in attaining policy targets depends on the availability of bioenergy technologies. Advanced technologies such as second-generation biofuels, biomass gasification for power production, and bioenergy with carbon capture and storage (BECCS) will likely change the performance of policy instruments. This article assesses the cost-effectiveness of energy policy instruments, considering new bioenergy technologies for the year 2030, with respect to greenhouse gas emission (GHG) reduction and fossil fuel substitution. Instruments that directly subsidize bioenergy are compared with instruments that aim at reducing GHG emissions. A spatially explicit modeling approach is used to account for biomass supply and energy distribution costs in Austria. Results indicate that a carbon tax performs cost-effectively with respect to both policy targets if BECCS is not available. However, the availability of BECCS creates a trade-off between GHG emission reduction and fossil fuel substitution. Biofuel blending obligations are costly in terms of attaining the policy targets. - Highlights: → Costs of energy policies and effects on reduction of CO 2 emissions and fossil fuel consumption. → Particular focus on new bioenergy production technologies such as second generation biofuels. → Spatially explicit techno-economic optimization model. → CO 2 tax: high costs for reducing fossil fuel consumption if carbon capture and storage is available. → Biofuel policy: no significant reductions in CO 2 emissions or fossil fuel consumption.

Spacecraft COst REduction Team (SCORE): TQM/CI on a massive scale

Science.gov (United States)

Bullard, Jerry D.

1992-01-01

The business of building satellites and space systems has matured. Few missions require, or can afford, excellent performance at any price. The new paradigm is doing more with less, providing quality systems at lower cost--in other words, doing our job 'Faster-Better-Cheaper.' The TRW Spacecraft COst REduction (SCORE) initiative was launched in 1990 by Daniel S. Goldin, then general manager of TRW's Space & Technology Group. The SCORE mission is to apply continuous improvement (CI) techniques to effect major reductions in the cost (our primary goal) and span time (as a corollary) required for the production of spacecraft. SCORE is a multi-year initiative that is having a profound effect on both the procedural and the cultural aspects of how we do business. The objectives of this initiative are being realized. The focus of this paper is not on the results of SCORE per se, but rather on the things we have leaned about how to do continuous improvement on a massive scale, with multilevel (hierarchical) CI teams. The following sections summarize the chronology of the SCORE initiative, from team formation to development of the year-end report for 1991. Lessons learned, the core of this presentation, are discussed--with particular focus on the unique aspects of SCORE. The SCORE initiative is continuing and, as a part of our evolving culture, will never end. It has resulted in profound insights into the way we do work and (the topic at hand) how to do CI for large and complex multidisciplinary development activities.

PowerFilm PowerShade Fixed Site Solar System Cost Reduction Plan

Science.gov (United States)

2014-07-31

system was designed which adds capability of grid tie connection to the standalone function. This battery operating system has built-in intelligence...goal concerning alternative conductive grid inks was to reduce the cost of the silver ink layer without a reduction in PV power with experimentation... system . To overcome this loss, a new BOS unit with higher power transfer efficiency has been developed. This system also has grid tie

Implementing Virtual Private Networking for Enabling Lower Cost, More Secure Wide Area Communications at Sandia National Laboratories; TOPICAL

International Nuclear Information System (INIS)

MILLER, MARC M.; YONEK JR., GEORGE A.

2001-01-01

Virtual Private Networking is a new communications technology that promises lower cost, more secure wide area communications by leveraging public networks such as the Internet. Sandia National Laboratories has embraced the technology for interconnecting remote sites to Sandia's corporate network, and for enabling remote access users for both dial-up and broadband access

Factory '82 - 30% reduction of operation cost at short term. Fabrik '82. Kurzzeitig 30% der Betriebskosten beeinflussen

Energy Technology Data Exchange (ETDEWEB)

1982-01-01

The present-day situation of many companies is characterized by a decreasing production volume. Consequences and effects of this phenomenon on production and ancillary branches are presented and analysed under aspects of cost, measures are described for influencing operation cost in an effective and continuing way at short term: cost of energy and disposal, heat insulation and heat recovery, cost reduction by computer application, cost reduction with material flow, operational cost analyses with detection of weak spots. Replanning factories and subsections which frequently have shown to be necessary - new planning projects have become more or less rare these days - is accounted for by the range of problem-related topics. Next to issues of CAD in factory planning, another approach is demonstrated which is still underutilized when designing and using factory buildings in keeping with cost: value-analysis factory planning.

Analysis of Fuel Cell Markets in Japan and the US: Experience Curve Development and Cost Reduction Disaggregation

Energy Technology Data Exchange (ETDEWEB)

Wei, Max [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Smith, Sarah J. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Sohn, Michael D. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2016-07-15

Fuel cells are both a longstanding and emerging technology for stationary and transportation applications, and their future use will likely be critical for the deep decarbonization of global energy systems. As we look into future applications, a key challenge for policy-makers and technology market forecasters who seek to track and/or accelerate their market adoption is the ability to forecast market costs of the fuel cells as technology innovations are incorporated into market products. Specifically, there is a need to estimate technology learning rates, which are rates of cost reduction versus production volume. Unfortunately, no literature exists for forecasting future learning rates for fuel cells. In this paper, we look retrospectively to estimate learning rates for two fuel cell deployment programs: (1) the micro-combined heat and power (CHP) program in Japan, and (2) the Self-Generation Incentive Program (SGIP) in California. These two examples have a relatively broad set of historical market data and thus provide an informative and international comparison of distinct fuel cell technologies and government deployment programs. We develop a generalized procedure for disaggregating experience-curve cost-reductions in order to disaggregate the Japanese fuel cell micro-CHP market into its constituent components, and we derive and present a range of learning rates that may explain observed market trends. Finally, we explore the differences in the technology development ecosystem and market conditions that may have contributed to the observed differences in cost reduction and draw policy observations for the market adoption of future fuel cell technologies. The scientific and policy contributions of this paper are the first comparative experience curve analysis of past fuel cell technologies in two distinct markets, and the first quantitative comparison of a detailed cost model of fuel cell systems with actual market data. The resulting approach is applicable to

Conference 'onshore and offshore wind energy cost reduction: challenges and opportunities for the industry in France and in Germany'

International Nuclear Information System (INIS)

Abadie, Pierre-Marie; Hinsch, Thomas; Wallasch, Anna-Kathrin; Giese, Norbert; Guyet, Quentin; Lenhardt, Edouard; Beinke, Thies; Bodenstab, Marc; Wolff, Nicolas; Burkhardt, Claus; Lessmeister, Andreas L.

2012-01-01

The French-German office for Renewable energies (OFAEnR) organised a conference on cost reduction in onshore and offshore wind energy. In the framework of this French-German exchange of experience, about 140 participants exchanged views on the cost allocation in onshore wind energy projects, on their financing, and on the transport and logistics profitability challenges. Concrete examples of operating and maintenance cost reductions in offshore wind energy projects were presented as well. This document brings together the available presentations (slides) made during this event: 1 - Overview of France's onshore and offshore wind support policies (Pierre-Marie Abadie); 2 - Keynote: Framework conditions for cost reductions in the German wind energy sector (Thomas Hinsch); 3 - Cost of onshore wind energy projects in Germany - Status and experience feedback (Anna-Kathrin Wallasch); 4 - Crown estate's Offshore Wind Cost Reduction Pathways Study: how to transpose the conclusions to the German case (Norbert Giese); 5 - Combined Forces for Reliable Supply Chain - French-German Convergence of expertise: strategic partnerships for offshore projects implementation (Quentin Guyet, Edouard Lenhardt); 6 - Reducing costs of onshore and offshore wind energy. Mon2Sea research project - Real-time monitoring of transport and cargo handling of components for the offshore installation of wind turbines (Thies Beinke, Marc Bodenstab); 7 - expertise, Innovation and reduction of cost of energy: Vestas experience (Nicolas Wolff); 8 - Far-Offshore-Wind projects. Results of the First German Offshore Windpark alpha ventus (Claus Burkhardt); 9 - Maintenance for Offshore-Wind parks: examples and good practices for the future (Andreas L. Lessmeister)

Schedule and cost reduction of nuclear generating facilities in Ontario study overview

International Nuclear Information System (INIS)

Huterer, J.

1991-01-01

During the five year period 1985 to 1990, Ontario Hydro conducted a major study with the objective to reduce the cost and construction duration for future nuclear generating facilities in Ontario. This paper reports on the study called Major Projects: Schedule and Cost Reduction Study (SCRS). Ontario Hydro is a public utility with the responsibility for meeting electricity need for the province of Ontario with a population of 9.6 million. In order to adequately address future electricity needs, Ontario Hydro has developed and submitted a demand/supply plan which covers the next 25 years. The SCRS for major projects contributed to this demand/supply plan

48 CFR 1615.407-1 - Rate reduction for defective pricing or defective cost or pricing data.

Science.gov (United States)

2010-10-01

... defective pricing or defective cost or pricing data. 1615.407-1 Section 1615.407-1 Federal Acquisition... CONTRACTING METHODS AND CONTRACT TYPES CONTRACTING BY NEGOTIATION Contract Pricing 1615.407-1 Rate reduction for defective pricing or defective cost or pricing data. The clause set forth in section 1652.215-70...

48 CFR 1652.215-70 - Rate Reduction for Defective Pricing or Defective Cost or Pricing Data.

Science.gov (United States)

2010-10-01

... Defective Pricing or Defective Cost or Pricing Data. 1652.215-70 Section 1652.215-70 Federal Acquisition... CLAUSES AND FORMS CONTRACT CLAUSES Texts of FEHBP Clauses 1652.215-70 Rate Reduction for Defective Pricing or Defective Cost or Pricing Data. As prescribed in 1615.407-1, the following clause shall be...

ISS Operations Cost Reductions Through Automation of Real-Time Planning Tasks

Science.gov (United States)

Hall, Timothy A.; Clancey, William J.; McDonald, Aaron; Toschlog, Jason; Tucker, Tyson; Khan, Ahmed; Madrid, Steven (Eric)

2011-01-01

In 2007 the Johnson Space Center s Mission Operations Directorate (MOD) management team challenged their organizations to find ways to reduce the cost of operations for supporting the International Space Station (ISS) in the Mission Control Center (MCC). Each MOD organization was asked to define and execute projects that would help them attain cost reductions by 2012. The MOD Operations Division Flight Planning Branch responded to this challenge by launching several software automation projects that would allow them to greatly improve console operations and reduce ISS console staffing and intern reduce operating costs. These tasks ranged from improving the management and integration mission plan changes, to automating the uploading and downloading of information to and from the ISS and the associated ground complex tasks that required multiple decision points. The software solutions leveraged several different technologies including customized web applications and implementation of industry standard web services architecture; as well as engaging a previously TRL 4-5 technology developed by Ames Research Center (ARC) that utilized an intelligent agent-based system to manage and automate file traffic flow, archive data, and generate console logs. These projects to date have allowed the MOD Operations organization to remove one full time (7 x 24 x 365) ISS console position in 2010; with the goal of eliminating a second full time ISS console support position by 2012. The team will also reduce one long range planning console position by 2014. When complete, these Flight Planning Branch projects will account for the elimination of 3 console positions and a reduction in staffing of 11 engineering personnel (EP) for ISS.

A Cost Effectiveness Analysis of Salt Reduction Policies to Reduce Coronary Heart Disease in Four Eastern Mediterranean Countries

Science.gov (United States)

Mason, Helen; Shoaibi, Azza; Ghandour, Rula; O'Flaherty, Martin; Capewell, Simon; Khatib, Rana; Jabr, Samer; Unal, Belgin; Sözmen, Kaan; Arfa, Chokri; Aissi, Wafa; Romdhane, Habiba Ben; Fouad, Fouad; Al-Ali, Radwan; Husseini, Abdullatif

2014-01-01

Background Coronary Heart Disease (CHD) is rising in middle income countries. Population based strategies to reduce specific CHD risk factors have an important role to play in reducing overall CHD mortality. Reducing dietary salt consumption is a potentially cost-effective way to reduce CHD events. This paper presents an economic evaluation of population based salt reduction policies in Tunisia, Syria, Palestine and Turkey. Methods and Findings Three policies to reduce dietary salt intake were evaluated: a health promotion campaign, labelling of food packaging and mandatory reformulation of salt content in processed food. These were evaluated separately and in combination. Estimates of the effectiveness of salt reduction on blood pressure were based on a literature review. The reduction in mortality was estimated using the IMPACT CHD model specific to that country. Cumulative population health effects were quantified as life years gained (LYG) over a 10 year time frame. The costs of each policy were estimated using evidence from comparable policies and expert opinion including public sector costs and costs to the food industry. Health care costs associated with CHDs were estimated using standardized unit costs. The total cost of implementing each policy was compared against the current baseline (no policy). All costs were calculated using 2010 PPP exchange rates. In all four countries most policies were cost saving compared with the baseline. The combination of all three policies (reducing salt consumption by 30%) resulted in estimated cost savings of $235,000,000 and 6455 LYG in Tunisia; $39,000,000 and 31674 LYG in Syria; $6,000,000 and 2682 LYG in Palestine and $1,3000,000,000 and 378439 LYG in Turkey. Conclusion Decreasing dietary salt intake will reduce coronary heart disease deaths in the four countries. A comprehensive strategy of health education and food industry actions to label and reduce salt content would save both money and lives. PMID:24409297

A logical approach to determine a waste segregation/volume reduction program

International Nuclear Information System (INIS)

Shriner, G.D.; Carmel, P.G.; Shimmura, H.

1986-01-01

This paper discusses advantages and disadvantages of hand sorting versus use of automated radioactive waste segregation monitors and makes an analysis of costs/versus benefits based on volume with time. Many programs to be employed to prevent unnecessary waste generation with little or no additional cost to the power plant. Parameters needed to perform a cost analysis and methods used to obtain them are discussed. Recommendations on use of vendor-supplied services for segregation, volume reduction, and decontamination are given. The data provided will enable the selection of a program(s) to benefit the individual user's requirements

Cost reduction from resolution/improvement of carcinoid syndrome symptoms following treatment with above-standard dose of octreotide LAR.

Science.gov (United States)

Huynh, Lynn; Totev, Todor; Vekeman, Francis; Neary, Maureen P; Duh, Mei S; Benson, Al B

2017-09-01

To calculate the cost reduction associated with diarrhea/flushing symptom resolution/improvement following treatment with above-standard dose octreotide-LAR from the commercial payor's perspective. Diarrhea and flushing are two major carcinoid syndrome symptoms of neuroendocrine tumor (NET). Previously, a study of NET patients from three US tertiary oncology centers (NET 3-Center Study) demonstrated that dose escalation of octreotide LAR to above-standard dose resolved/improved diarrhea/flushing in 79% of the patients within 1 year. Time course of diarrhea/flushing symptom data were collected from the NET 3-Center Study. Daily healthcare costs were calculated from a commercial claims database analysis. For the patient cohort experiencing any diarrhea/flushing symptom resolution/improvement, their observation period was divided into days of symptom resolution/improvement or no improvement, which were then multiplied by the respective daily healthcare cost and summed over 1 year to yield the blended mean annual cost per patient. For patients who experienced no diarrhea/flushing symptom improvement, mean annual daily healthcare cost of diarrhea/flushing over a 1-year period was calculated. The economic model found that 108 NET patients who experienced diarrhea/flushing symptom resolution/improvement within 1 year had statistically significantly lower mean annual healthcare cost/patient than patients with no symptom improvement, by $14,766 (p = .03). For the sub-set of 85 patients experiencing resolution/improvement of diarrhea, their cost reduction was more pronounced, at $18,740 (p = .01), statistically significantly lower than those with no improvement; outpatient costs accounted for 56% of the cost reduction (p = .02); inpatient costs, emergency department costs, and pharmacy costs accounted for the remaining 44%. The economic model relied on two different sources of data, with some heterogeneity in the prior treatment and disease status of patients

Beyond Waste Reduction: Creating Value with Information Systems in Closed-Loop Supply Chains

NARCIS (Netherlands)

O.R. Koppius (Otto); O. Ozdemir (Oznur); E.A. van der Laan (Erwin)

2011-01-01

textabstractWe study the role of information systems in enabling closed-loop supply chains. Past research in green IS and closed-loop supply chains has shown that it can result in substantial cost savings and waste reduction. We complement this research by showing that the effects are more than

The Cost of Class Size Reduction: Advice for Policymakers. RAND Graduate School Dissertation.

Science.gov (United States)

Reichardt, Robert E.

This dissertation provides information to state-level policymakers that will help them avoid two implementation problems seen in the past in California's class-size-reduction (CSR) reform. The first problem was that flat, per student reimbursement did not adequately cover costs in districts with larger pre-CSR class-sizes or smaller schools. The…

Low cost biological lung volume reduction therapy for advanced emphysema

Directory of Open Access Journals (Sweden)

Bakeer M

2016-08-01

Full Text Available Mostafa Bakeer,1 Taha Taha Abdelgawad,1 Raed El-Metwaly,1 Ahmed El-Morsi,1 Mohammad Khairy El-Badrawy,1 Solafa El-Sharawy2 1Chest Medicine Department, 2Clinical Pathology Department, Faculty of Medicine, Mansoura University, Mansoura, Egypt Background: Bronchoscopic lung volume reduction (BLVR, using biological agents, is one of the new alternatives to lung volume reduction surgery.Objectives: To evaluate efficacy and safety of biological BLVR using low cost agents including autologous blood and fibrin glue.Methods: Enrolled patients were divided into two groups: group A (seven patients in which autologous blood was used and group B (eight patients in which fibrin glue was used. The agents were injected through a triple lumen balloon catheter via fiberoptic bronchoscope. Changes in high resolution computerized tomography (HRCT volumetry, pulmonary function tests, symptoms, and exercise capacity were evaluated at 12 weeks postprocedure as well as for complications.Results: In group A, at 12 weeks postprocedure, there was significant improvement in the mean value of HRCT volumetry and residual volume/total lung capacity (% predicted (P-value: <0.001 and 0.038, respectively. In group B, there was significant improvement in the mean value of HRCT volumetry and (residual volume/total lung capacity % predicted (P-value: 0.005 and 0.004, respectively. All patients tolerated the procedure with no mortality.Conclusion: BLVR using autologous blood and locally prepared fibrin glue is a promising method for therapy of advanced emphysema in term of efficacy, safety as well as cost effectiveness. Keywords: BLVR, bronchoscopy, COPD, interventional pulmonology

Comparison of cost effectiveness of risk reduction among different energy systems: French case studies. Final report of the co-ordinated research programme

International Nuclear Information System (INIS)

Lochard, Jacques

1989-08-01

This report presents the three French case studies performed in the framework of the coordinated research program on 'Comparison of Cost-effectiveness of Risk Reduction among different Energy Systems': Cost effectiveness of robotics and remote tooling for occupational risk reduction at a nuclear fuel fabrication facility; Cost-effectiveness of protection actions to reduce occupational exposures in underground uranium mines; Cost-effectiveness of safety measures to reduce public risk associated with the transportation of UF 6 by truck and trains

Reward Pays the Cost of Noise Reduction in Motor and Cognitive Control.

Science.gov (United States)

Manohar, Sanjay G; Chong, Trevor T-J; Apps, Matthew A J; Batla, Amit; Stamelou, Maria; Jarman, Paul R; Bhatia, Kailash P; Husain, Masud

2015-06-29

Speed-accuracy trade-off is an intensively studied law governing almost all behavioral tasks across species. Here we show that motivation by reward breaks this law, by simultaneously invigorating movement and improving response precision. We devised a model to explain this paradoxical effect of reward by considering a new factor: the cost of control. Exerting control to improve response precision might itself come at a cost--a cost to attenuate a proportion of intrinsic neural noise. Applying a noise-reduction cost to optimal motor control predicted that reward can increase both velocity and accuracy. Similarly, application to decision-making predicted that reward reduces reaction times and errors in cognitive control. We used a novel saccadic distraction task to quantify the speed and accuracy of both movements and decisions under varying reward. Both faster speeds and smaller errors were observed with higher incentives, with the results best fitted by a model including a precision cost. Recent theories consider dopamine to be a key neuromodulator in mediating motivational effects of reward. We therefore examined how Parkinson's disease (PD), a condition associated with dopamine depletion, alters the effects of reward. Individuals with PD showed reduced reward sensitivity in their speed and accuracy, consistent in our model with higher noise-control costs. Including a cost of control over noise explains how reward may allow apparent performance limits to be surpassed. On this view, the pattern of reduced reward sensitivity in PD patients can specifically be accounted for by a higher cost for controlling noise. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

Reduction potential, shadow prices, and pollution costs of agricultural pollutants in China.

Science.gov (United States)

Tang, Kai; Gong, Chengzhu; Wang, Dong

2016-01-15

This paper analyses the reduction potential, shadow prices, and pollution costs of agricultural pollutants in China based on provincial panel data for 2001-2010. Using a parameterized quadratic form for the directional output distance function, we find that if agricultural sectors in all provinces were to produce on the production frontier, China could potentially reduce agricultural emissions of chemical oxygen demand (COD), total nitrogen (TN), and total phosphorus (TP) by 16.0%, 16.2%, and 20.4%, respectively. Additionally, our results show that the shadow price of TN increased rapidly and continuously, while that of COD and TP fluctuated for the whole period. For the whole country, the average shadow price of COD, TN, and TP are 8266 Yuan/tonne, 25,560 Yuan/tonne, and 10,160 Yuan/tonne, respectively. The regional shadow prices of agricultural pollutants are unbalanced. Furthermore, we show that the pollution costs from emissions of COD, TN, and TP are 6.09% of the annual gross output value of the agricultural sector and are highest in the Western and lowest in the Eastern provinces. Our estimates suggest that there is scope for further pollution abatement and simultaneous output expansion for China's agriculture if farmers promote greater efficiency in their production process. Policymakers are required to dynamically adjust the pollution tax rates and ascertain the initial permit price in an emission trading system. Policymakers should also consider the different pollution costs for each province when making the reduction allocations within the agricultural sector. Copyright © 2015 Elsevier B.V. All rights reserved.

Development of a module for Cost-Benefit analysis of risk reduction measures for natural hazards for the CHANGES-SDSS platform

Science.gov (United States)

Berlin, Julian; Bogaard, Thom; Van Westen, Cees; Bakker, Wim; Mostert, Eric; Dopheide, Emile

2014-05-01

Cost benefit analysis (CBA) is a well know method used widely for the assessment of investments either in the private and public sector. In the context of risk mitigation and the evaluation of risk reduction alternatives for natural hazards its use is very important to evaluate the effectiveness of such efforts in terms of avoided monetary losses. However the current method has some disadvantages related to the spatial distribution of the costs and benefits, the geographical distribution of the avoided damage and losses, the variation in areas that are benefited in terms of invested money and avoided monetary risk. Decision-makers are often interested in how the costs and benefits are distributed among different administrative units of a large area or region, so they will be able to compare and analyse the cost and benefits per administrative unit as a result of the implementation of the risk reduction projects. In this work we first examined the Cost benefit procedure for natural hazards, how the costs are assessed for several structural and non-structural risk reduction alternatives, we also examined the current problems of the method such as the inclusion of cultural and social considerations that are complex to monetize , the problem of discounting future values using a defined interest rate and the spatial distribution of cost and benefits. We also examined the additional benefits and the indirect costs associated with the implementation of the risk reduction alternatives such as the cost of having a ugly landscape (also called negative benefits). In the last part we examined the current tools and software used in natural hazards assessment with support to conduct CBA and we propose design considerations for the implementation of the CBA module for the CHANGES-SDSS Platform an initiative of the ongoing 7th Framework Programme "CHANGES of the European commission. Keywords: Risk management, Economics of risk mitigation, EU Flood Directive, resilience, prevention

Low-cost optical fabrication of flexible copper electrode via laser-induced reductive sintering and adhesive transfer

Science.gov (United States)

Back, Seunghyun; Kang, Bongchul

2018-02-01

Fabricating copper electrodes on heat-sensitive polymer films in air is highly challenging owing to the need of expensive copper nanoparticles, rapid oxidation of precursor during sintering, and limitation of sintering temperature to prevent the thermal damage of the polymer film. A laser-induced hybrid process of reductive sintering and adhesive transfer is demonstrated to cost-effectively fabricate copper electrode on a polyethylene film with a thermal resistance below 100 °C. A laser-induced reductive sintering process directly fabricates a high-conductive copper electrode onto a glass donor from copper oxide nanoparticle solution via photo-thermochemical reduction and agglomeration of copper oxide nanoparticles. The sintered copper patterns were transferred in parallel to a heat-sensitive polyethylene film through self-selective surface adhesion of the film, which was generated by the selective laser absorption of the copper pattern. The method reported here could become one of the most important manufacturing technologies for fabricating low-cost wearable and disposable electronics.

Comparison of cost effectiveness of risk reduction among different energy systems: French case studies. Final report of the co-ordinated research programme

Energy Technology Data Exchange (ETDEWEB)

Lochard, Jacques [ed.

1989-08-01

This report presents the three French case studies performed in the framework of the coordinated research program on 'Comparison of Cost-effectiveness of Risk Reduction among different Energy Systems': Cost effectiveness of robotics and remote tooling for occupational risk reduction at a nuclear fuel fabrication facility; Cost-effectiveness of protection actions to reduce occupational exposures in underground uranium mines; Cost-effectiveness of safety measures to reduce public risk associated with the transportation of UF{sub 6} by truck and trains.

Modelled Cost-Effectiveness of a Package Size Cap and a Kilojoule Reduction Intervention to Reduce Energy Intake from Sugar-Sweetened Beverages in Australia

Science.gov (United States)

Mantilla Herrera, Ana Maria; Neal, Bruce; Zheng, Miaobing; Lal, Anita; Sacks, Gary

2017-01-01

Interventions targeting portion size and energy density of food and beverage products have been identified as a promising approach for obesity prevention. This study modelled the potential cost-effectiveness of: a package size cap on single-serve sugar sweetened beverages (SSBs) >375 mL (package size cap), and product reformulation to reduce energy content of packaged SSBs (energy reduction). The cost-effectiveness of each intervention was modelled for the 2010 Australia population using a multi-state life table Markov model with a lifetime time horizon. Long-term health outcomes were modelled from calculated changes in body mass index to their impact on Health-Adjusted Life Years (HALYs). Intervention costs were estimated from a limited societal perspective. Cost and health outcomes were discounted at 3%. Total intervention costs estimated in AUD 2010 were AUD 210 million. Both interventions resulted in reduced mean body weight (package size cap: 0.12 kg; energy reduction: 0.23 kg); and HALYs gained (package size cap: 73,883; energy reduction: 144,621). Cost offsets were estimated at AUD 750.8 million (package size cap) and AUD 1.4 billion (energy reduction). Cost-effectiveness analyses showed that both interventions were “dominant”, and likely to result in long term cost savings and health benefits. A package size cap and kJ reduction of SSBs are likely to offer excellent “value for money” as obesity prevention measures in Australia. PMID:28878175

Sustainable cost reduction by lean management in metallurgical processes

Directory of Open Access Journals (Sweden)

A. V. Todorut

2016-10-01

Full Text Available This paper focuses on the need for sustainable cost reduction in the metallurgical industry by applying Lean Management (LM tools and concepts in metallurgical production processes leading to increased competitiveness of corporations in a global market. The paper highlights that Lean Management is a novel way of thinking, adapting to change, reducing waste and continuous improvement, leading to sustainable development of companies in the metallurgical industry. The authors outline the main Lean Management instruments based on recent scientific research and include a comparative analysis of other tools, such as Sort, Straighten, Shine, Standardize, Sustain (5S, Visual Management (VM, Kaizen, Total Productive Maintenance (TPM, Single-Minute Exchange of Dies (SMED, leading to a critical appraisal of their application in the metallurgical industry.

How Expensive Is Expensive Enough? Opportunities for Cost Reductions in Offshore Wind Energy Logistics

DEFF Research Database (Denmark)

Poulsen, Thomas; Hasager, Charlotte Bay

2016-01-01

This paper reveals that logistics may conservatively amount to 18% of the levelized cost of energy for offshore wind farms. This is the key finding from an extensive case study carried out within the organization of the world’s leading offshore wind farm developer and operator. The case study aimed...... to, and produced, a number of possible opportunities for offshore wind cost reductions through logistics innovation; however, within the case study company, no company-wide logistics organization existed to focus horizontally on reducing logistics costs in general. Logistics was not well defined...... within the case study company, and a logistics strategy did not exist. With full life-cycle costs of offshore wind farms still high enough to present a political challenge within the European Union in terms of legislation to ensure offshore wind diffusion beyond 2020, our research presents logistics...

A cost effectiveness analysis of salt reduction policies to reduce coronary heart disease in four Eastern Mediterranean countries.

Directory of Open Access Journals (Sweden)

Helen Mason

Full Text Available BACKGROUND: Coronary Heart Disease (CHD is rising in middle income countries. Population based strategies to reduce specific CHD risk factors have an important role to play in reducing overall CHD mortality. Reducing dietary salt consumption is a potentially cost-effective way to reduce CHD events. This paper presents an economic evaluation of population based salt reduction policies in Tunisia, Syria, Palestine and Turkey. METHODS AND FINDINGS: Three policies to reduce dietary salt intake were evaluated: a health promotion campaign, labelling of food packaging and mandatory reformulation of salt content in processed food. These were evaluated separately and in combination. Estimates of the effectiveness of salt reduction on blood pressure were based on a literature review. The reduction in mortality was estimated using the IMPACT CHD model specific to that country. Cumulative population health effects were quantified as life years gained (LYG over a 10 year time frame. The costs of each policy were estimated using evidence from comparable policies and expert opinion including public sector costs and costs to the food industry. Health care costs associated with CHDs were estimated using standardized unit costs. The total cost of implementing each policy was compared against the current baseline (no policy. All costs were calculated using 2010 PPP exchange rates. In all four countries most policies were cost saving compared with the baseline. The combination of all three policies (reducing salt consumption by 30% resulted in estimated cost savings of $235,000,000 and 6455 LYG in Tunisia; $39,000,000 and 31674 LYG in Syria; $6,000,000 and 2682 LYG in Palestine and $1,3000,000,000 and 378439 LYG in Turkey. CONCLUSION: Decreasing dietary salt intake will reduce coronary heart disease deaths in the four countries. A comprehensive strategy of health education and food industry actions to label and reduce salt content would save both money and lives.

Estimate of the benefits of a population-based reduction in dietary sodium additives on hypertension and its related health care costs in Canada.

Science.gov (United States)

Joffres, Michel R; Campbell, Norm R C; Manns, Braden; Tu, Karen

2007-05-01

Hypertension is the leading risk factor for mortality worldwide. One-quarter of the adult Canadian population has hypertension, and more than 90% of the population is estimated to develop hypertension if they live an average lifespan. Reductions in dietary sodium additives significantly lower systolic and diastolic blood pressure, and population reductions in dietary sodium are recommended by major scientific and public health organizations. To estimate the reduction in hypertension prevalence and specific hypertension management cost savings associated with a population-wide reduction in dietary sodium additives. Based on data from clinical trials, reducing dietary sodium additives by 1840 mg/day would result in a decrease of 5.06 mmHg (systolic) and 2.7 mmHg (diastolic) blood pressures. Using Canadian Heart Health Survey data, the resulting reduction in hypertension was estimated. Costs of laboratory testing and physician visits were based on 2001 to 2003 Ontario Health Insurance Plan data, and the number of physician visits and costs of medications for patients with hypertension were taken from 2003 IMS Canada. To estimate the reduction in total physician visits and laboratory costs, current estimates of aware hypertensive patients in Canada were used from the Canadian Community Health Survey. Reducing dietary sodium additives may decrease hypertension prevalence by 30%, resulting in one million fewer hypertensive patients in Canada, and almost double the treatment and control rate. Direct cost savings related to fewer physician visits, laboratory tests and lower medication use are estimated to be approximately $430 million per year. Physician visits and laboratory costs would decrease by 6.5%, and 23% fewer treated hypertensive patients would require medications for control of blood pressure. Based on these estimates, lowering dietary sodium additives would lead to a large reduction in hypertension prevalence and result in health care cost savings in Canada.

Disaster risk reduction in developing countries: costs, benefits and institutions.

Science.gov (United States)

Kenny, Charles

2012-10-01

Some 60,000 people worldwide die annually in natural disasters, mostly due to the collapse of buildings in earthquakes, and primarily in the developing world. This is despite the fact that engineering solutions exist that can eliminate almost completely the risk of such deaths. Why is this? The solutions are expensive and technically demanding, so their cost-benefit ratio often is unfavourable as compared to other interventions. Nonetheless, there are various public disaster risk reduction interventions that are highly cost-effective. That such interventions frequently remain unimplemented or ineffectively executed points to a role for issues of political economy. Building regulations in developing countries appear to have limited impact in many cases, perhaps because of inadequate capacity and corruption. Public construction often is of low quality, perhaps for similar reasons. This suggests the need for approaches that emphasise simple and limited disaster risk regulation covering only the most at-risk structures-and that, preferably, non-experts can monitor-as well as numerous transparency and oversight mechanisms for public construction projects. © 2012 The Author(s). Journal compilation © Overseas Development Institute, 2012.

Enabling high speed friction stir welding of aluminum tailor welded blanks

Science.gov (United States)

Hovanski, Yuri

Current welding technologies for production of aluminum tailor-welded blanks (TWBs) are utilized in low-volume and niche applications, and have yet to be scaled for the high-volume vehicle market. This study targeted further weight reduction, part reduction, and cost savings by enabling tailor-welded blank technology for aluminum alloys at high-volumes. While friction stir welding (FSW) has traditionally been applied at linear velocities less than one meter per minute, high volume production applications demand the process be extended to higher velocities more amenable to cost sensitive production environments. Unfortunately, weld parameters and performance developed and characterized at low to moderate welding velocities do not directly translate to high speed linear friction stir welding. Therefore, in order to facilitate production of high volume aluminum FSW components, parameters were developed with a minimum welding velocity of three meters per minute. With an emphasis on weld quality, welded blanks were evaluated for post-weld formability using a combination of numerical and experimental methods. Evaluation across scales was ultimately validated by stamping full-size production door inner panels made from dissimilar thickness aluminum tailor-welded blanks, which provided validation of the numerical and experimental analysis of laboratory scale tests.

High-Speed Friction-Stir Welding to Enable Aluminum Tailor-Welded Blanks

Science.gov (United States)

Hovanski, Yuri; Upadhyay, Piyush; Carsley, John; Luzanski, Tom; Carlson, Blair; Eisenmenger, Mark; Soulami, Ayoub; Marshall, Dustin; Landino, Brandon; Hartfield-Wunsch, Susan

2015-05-01

Current welding technologies for production of aluminum tailor-welded blanks (TWBs) are utilized in low-volume and niche applications, and they have yet to be scaled for the high-volume vehicle market. This study targeted further weight reduction, part reduction, and cost savings by enabling tailor-welded blank technology for aluminum alloys at high volumes. While friction-stir welding (FSW) has been traditionally applied at linear velocities less than 1 m/min, high-volume production applications demand the process be extended to higher velocities more amenable to cost-sensitive production environments. Unfortunately, weld parameters and performance developed and characterized at low-to-moderate welding velocities do not directly translate to high-speed linear FSW. Therefore, to facilitate production of high-volume aluminum FSW components, parameters were developed with a minimum welding velocity of 3 m/min. With an emphasis on weld quality, welded blanks were evaluated for postweld formability using a combination of numerical and experimental methods. An evaluation across scales was ultimately validated by stamping full-size production door inner panels made from dissimilar thickness aluminum TWBs, which provided validation of the numerical and experimental analysis of laboratory-scale tests.

Uranium Mill Tailings Remedial Action Project: Cost Reduction and Productivity Improvement Program Project Plan

International Nuclear Information System (INIS)

1991-11-01

The purpose of the Cost Reduction/Productivity Improvement Program Plan is to formalize and improve upon existing efforts to control costs which have been underway since project inception. This program plan has been coordinated with the Department of Energy (DOE) Office of Environmental Management (EM) and the DOE Field Office, Albuquerque (AL). It incorporates prior Uranium Mill Tallings Remedial Action (UMTRA) Project Office guidance issued on the subject. The opportunities for reducing cosh and improving productivity are endless. The CR/PIP has these primary objectives: Improve productivity and quality; heighten the general cost consciousness of project participants, at all levels of their organizations; identify and implement specific innovative employee ideas that extend beyond what is required through existing processes and procedures; emphasize efforts that create additional value for the money spent by maintaining the project Total Estimated Cost (TEC) at the lowest possible level

Update on Multi-Variable Parametric Cost Models for Ground and Space Telescopes

Science.gov (United States)

Stahl, H. Philip; Henrichs, Todd; Luedtke, Alexander; West, Miranda

2012-01-01

Parametric cost models can be used by designers and project managers to perform relative cost comparisons between major architectural cost drivers and allow high-level design trades; enable cost-benefit analysis for technology development investment; and, provide a basis for estimating total project cost between related concepts. This paper reports on recent revisions and improvements to our ground telescope cost model and refinements of our understanding of space telescope cost models. One interesting observation is that while space telescopes are 50X to 100X more expensive than ground telescopes, their respective scaling relationships are similar. Another interesting speculation is that the role of technology development may be different between ground and space telescopes. For ground telescopes, the data indicates that technology development tends to reduce cost by approximately 50% every 20 years. But for space telescopes, there appears to be no such cost reduction because we do not tend to re-fly similar systems. Thus, instead of reducing cost, 20 years of technology development may be required to enable a doubling of space telescope capability. Other findings include: mass should not be used to estimate cost; spacecraft and science instrument costs account for approximately 50% of total mission cost; and, integration and testing accounts for only about 10% of total mission cost.

A single-vendor and a single-buyer integrated inventory model with ordering cost reduction dependent on lead time

Science.gov (United States)

Vijayashree, M.; Uthayakumar, R.

2017-09-01

Lead time is one of the major limits that affect planning at every stage of the supply chain system. In this paper, we study a continuous review inventory model. This paper investigates the ordering cost reductions are dependent on lead time. This study addressed two-echelon supply chain problem consisting of a single vendor and a single buyer. The main contribution of this study is that the integrated total cost of the single vendor and the single buyer integrated system is analyzed by adopting two different (linear and logarithmic) types ordering cost reductions act dependent on lead time. In both cases, we develop effective solution procedures for finding the optimal solution and then illustrative numerical examples are given to illustrate the results. The solution procedure is to determine the optimal solutions of order quantity, ordering cost, lead time and the number of deliveries from the single vendor and the single buyer in one production run, so that the integrated total cost incurred has the minimum value. Ordering cost reduction is the main aspect of the proposed model. A numerical example is given to validate the model. Numerical example solved by using Matlab software. The mathematical model is solved analytically by minimizing the integrated total cost. Furthermore, the sensitivity analysis is included and the numerical examples are given to illustrate the results. The results obtained in this paper are illustrated with the help of numerical examples. The sensitivity of the proposed model has been checked with respect to the various major parameters of the system. Results reveal that the proposed integrated inventory model is more applicable for the supply chain manufacturing system. For each case, an algorithm procedure of finding the optimal solution is developed. Finally, the graphical representation is presented to illustrate the proposed model and also include the computer flowchart in each model.

Residential, Commercial, and Utility-Scale Photovoltaic (PV) System Prices in the United States: Current Drivers and Cost-Reduction Opportunities

Energy Technology Data Exchange (ETDEWEB)

Goodrich, A.; James, T.; Woodhouse, M.

2012-02-01

The price of photovoltaic (PV) systems in the United States (i.e., the cost to the system owner) has dropped precipitously in recent years, led by substantial reductions in global PV module prices. However, system cost reductions are not necessarily realized or realized in a timely manner by many customers. Many reasons exist for the apparent disconnects between installation costs, component prices, and system prices; most notable is the impact of fair market value considerations on system prices. To guide policy and research and development strategy decisions, it is necessary to develop a granular perspective on the factors that underlie PV system prices and to eliminate subjective pricing parameters. This report's analysis of the overnight capital costs (cash purchase) paid for PV systems attempts to establish an objective methodology that most closely approximates the book value of PV system assets.

Improved Cost-Base Design of Water Distribution Networks using Genetic Algorithm

Science.gov (United States)

Moradzadeh Azar, Foad; Abghari, Hirad; Taghi Alami, Mohammad; Weijs, Steven

2010-05-01

Population growth and progressive extension of urbanization in different places of Iran cause an increasing demand for primary needs. The water, this vital liquid is the most important natural need for human life. Providing this natural need is requires the design and construction of water distribution networks, that incur enormous costs on the country's budget. Any reduction in these costs enable more people from society to access extreme profit least cost. Therefore, investment of Municipal councils need to maximize benefits or minimize expenditures. To achieve this purpose, the engineering design depends on the cost optimization techniques. This paper, presents optimization models based on genetic algorithm(GA) to find out the minimum design cost Mahabad City's (North West, Iran) water distribution network. By designing two models and comparing the resulting costs, the abilities of GA were determined. the GA based model could find optimum pipe diameters to reduce the design costs of network. Results show that the water distribution network design using Genetic Algorithm could lead to reduction of at least 7% in project costs in comparison to the classic model. Keywords: Genetic Algorithm, Optimum Design of Water Distribution Network, Mahabad City, Iran.

Insourcing as a Stratagy for Cost Reduction: a Methodology to Identifiy and Mensurate the Supporting Decition Factors

Directory of Open Access Journals (Sweden)

Geraldo Magela Ribeiro dos Santos

2015-08-01

Full Text Available The 2008, market crisis made the national siderurgy industry reconsider its cost structure in order to maintain its competitiveness. Among the adopted strategies, insourcing was used in order to reduce costs and improve its productive capacity from its people and equipments resulting from declining sales. This research has been developed within this context and has as its objective to quantify the results of this choice. In order to achieve this objective, an insourcing case study of mechanical maintenance at ArcelorMittal Tubarão (AMT was used. Among the main advantages of insourcing at AMT are: the reduction of 24, 41% in maintenance services costs; a reduction in the level of rework and the level of lost time injuries (LTI; increased productivity and the index for available time fulfillment on shutdown. The factors that most contributed for the services insourcing are: collective bargaining agreements of the contractors higher than those of contracting and the incidence of profit, management fees (rates administration and taxes on the cost of labor and benefits to employees. This research also concludes that if the service prices of third parties were only adjusted based upon the inflation index (INPC over the last ten years, the insourcing of services, if viewed from the costs standpoint, would have been unfeasible.

Consequent use of IT tools as a driver for cost reduction and quality improvements

Science.gov (United States)

Hein, Stefan; Rapp, Roberto; Feustel, Andreas

2013-10-01

The semiconductor industry drives a lot of efforts in the field of cost reductions and quality improvements. The consequent use of IT tools is one possibility to support these goals. With the extensions of its 150mm Fab to 200mm Robert Bosch increased the systematic use of data analysis and Advanced Process Control (APC).

IoT Enabled Low Cost Wearable Device for Location and Information Tracking System

Directory of Open Access Journals (Sweden)

Kamaludin Nur Atika Binti

2017-01-01

Full Text Available An internet-of-things (IoT enabled low cost wearable device for location and information tracking system is developed to monitor and ensure the safety of the children while their parents are away either to work or abroad. This system aims to ensure human safety especially the children and efficiently initiate search and rescue in the event of emergencies. The device will notify the parents on the condition of the surroundings of the children, specifically inside the house and notify the parents if the children are outside the target area by using the application developed in the smartphone. The system uses a microcomputer called Beagle-Bone Black (BBB as the processor while GPS and LTE technology for wireless communication. Future improvement mainly focuses on reducing the size and power consumption of the device, improving communication module, and optimizing microcomputer’s specification.

Low-Cost Propellant Launch to LEO from a Tethered Balloon - Economic and Thermal Analysis

Science.gov (United States)

Wilcox, Brian H.; Schneider, Evan G.; Vaughan, David A.; Hall, Jeffrey L.

2010-01-01

This paper provides new analysis of the economics of low-cost propellant launch coupled with dry hardware re-use, and of the thermal control of the liquid hydrogen once on-orbit. One conclusion is that this approach enables an overall reduction in the cost-permission by as much as a factor of five as compared to current approaches for human exploration of the moon, Mars, and near-Earth asteroids.

UWB Wind Turbine Blade Deflection Sensing for Wind Energy Cost Reduction

DEFF Research Database (Denmark)

Zhang, Shuai; Jensen, Tobias Lindstrøm; Franek, Ondrej

2015-01-01

A new application of utilizing ultra-wideband (UWB) technology to sense wind turbine blade deflections is introduced in this paper for wind energy cost reduction. The lower UWB band of 3.1–5.3 GHz is applied. On each blade, there will be one UWB blade deflection sensing system, which consists...... is always of sufficient quality for accurate estimations under different deflections. The measured results reveal that the blade tip-root distance and blade deflection can be accurately estimated in the complicated and lossy wireless channels around a wind turbine blade. Some future research topics...

Coordinating a Supply Chain When Manufacturer Makes Cost Reduction Investment in Supplier

Directory of Open Access Journals (Sweden)

Shilei Huang

2016-01-01

Full Text Available We consider a supply chain consisting of an upstream supplier and a downstream manufacturer, in which the supplier provides a component to the manufacturer, facing a price-sensitive and uncertain demand. The manufacturer makes cost reduction investment in the supplier to improve the supplier’s production efficiency, which benefits the entire supply chain. We derive the optimal investment and operating decisions. Both the centralized and decentralized supply chains are studied. We show that the optimal investment and operating decisions in the decentralized setting may deviate from that in the centralized setting. To avoid the profit loss caused by such a deviation, we develop a coordination mechanism by introducing a combined policy of revenue-sharing policy and investment cost-sharing policy. We also show that the developed coordination mechanism can achieve Pareto improvement for the two players.

Compendium of cost-effectiveness evaluations of modifications for dose reduction at nuclear power plants

International Nuclear Information System (INIS)

Baum, J.W.; Matthews, G.R.

1985-12-01

This report summarizes available information on cost effectiveness of engineering modifications potentially valuable for dose reduction at nuclear power plants. Data were gathered from several US utilities, published literature, equipment and service suppliers, and recent technical meetings. Five simplified econometric models were employed to evaluate data and arrive at a value for cost effectiveness expressed in either (a) dollars/rem, or (b) total dollar savings calculated using a nominal value of $1000/rem. Models employed were: a basic model with no consideration given to the time value of money; two models in which discounting was used to evaluate costs and savings in terms of present values; and two models in which income taxes and revenue requirements were considered. Results from different models varied by as much as a factor of 10, and were generally lowest for the basic model and highest for the before-tax revenue requirements model. Results for 151 evaluations employing different assumptions concerning number of plants per site and outage impacts were tabulated in order of decreasing cost effectiveness. Twenty-five evaluations were identified as exceptionally cost effective since both costs and dose were saved. Forty evaluations indicated highly cost-effective changes based on costs below $1000/rem saved using results of the present-worth model that included discounting of future dose savings

Vehicle Lightweighting: Mass Reduction Spectrum Analysis and Process Cost Modeling

Energy Technology Data Exchange (ETDEWEB)

Mascarin, Anthony [IBIS Associates, Inc., Waltham, MA (United States); Hannibal, Ted [IBIS Associates, Inc., Waltham, MA (United States); Raghunathan, Anand [Energetics Inc., Columbia, MD (United States); Ivanic, Ziga [Energetics Inc., Columbia, MD (United States); Clark, Michael [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2016-03-01

The U.S. Department of Energy’s Vehicle Technologies Office, Materials area commissioned a study to model and assess manufacturing economics of alternative design and production strategies for a series of lightweight vehicle concepts. In the first two phases of this effort examined combinations of strategies aimed at achieving strategic targets of 40% and a 45% mass reduction relative to a standard North American midsize passenger sedan at an effective cost of $3.42 per pound (lb) saved. These results have been reported in the Idaho National Laboratory report INL/EXT-14-33863 entitled Vehicle Lightweighting: 40% and 45% Weight Savings Analysis: Technical Cost Modeling for Vehicle Lightweighting published in March 2015. The data for these strategies were drawn from many sources, including Lotus Engineering Limited and FEV, Inc. lightweighting studies, U.S. Department of Energy-funded Vehma International of America, Inc./Ford Motor Company Multi-Material Lightweight Prototype Vehicle Demonstration Project, the Aluminum Association Transportation Group, many United States Council for Automotive Research’s/United States Automotive Materials Partnership LLC lightweight materials programs, and IBIS Associates, Inc.’s decades of experience in automotive lightweighting and materials substitution analyses.

Vehicle Lightweighting: Mass Reduction Spectrum Analysis and Process Cost Modeling

International Nuclear Information System (INIS)

Mascarin, Anthony; Hannibal, Ted; Raghunathan, Anand; Ivanic, Ziga; Clark, Michael

2016-01-01

The U.S. Department of Energy's Vehicle Technologies Office, Materials area commissioned a study to model and assess manufacturing economics of alternative design and production strategies for a series of lightweight vehicle concepts. In the first two phases of this effort examined combinations of strategies aimed at achieving strategic targets of 40% and a 45% mass reduction relative to a standard North American midsize passenger sedan at an effective cost of $3.42 per pound (lb) saved. These results have been reported in the Idaho National Laboratory report INL/EXT-14-33863 entitled Vehicle Lightweighting: 40% and 45% Weight Savings Analysis: Technical Cost Modeling for Vehicle Lightweighting published in March 2015. The data for these strategies were drawn from many sources, including Lotus Engineering Limited and FEV, Inc. lightweighting studies, U.S. Department of Energy-funded Vehma International of America, Inc./Ford Motor Company Multi-Material Lightweight Prototype Vehicle Demonstration Project, the Aluminum Association Transportation Group, many United States Council for Automotive Research's/United States Automotive Materials Partnership LLC lightweight materials programs, and IBIS Associates, Inc.'s decades of experience in automotive lightweighting and materials substitution analyses.

Reduction of wind powered generator cost by use of a one bladed rotor

Energy Technology Data Exchange (ETDEWEB)

Pruyn, R R; Wiesner, W; Ljungstroem, O [ed.

1976-01-01

Cost analysis supported by preliminary design studies of one and two bladed wind powered generator units shows that a 30% reduction in acquisition cost can be achieved with a one bladed design. Designs studied were sized for an output power of 1000 kilowatts. The one bladed design has the potential for reducing acquisition cost to $680 per available kilowatt if the unit is located in a region with mean surface winds of 15 mph. Vibratory loads of the one bladed design are significant and will require considerable design attention. The one per rev Coriolis torque caused by blade flapping is the most significant problem. The major source of blade flapping will be the velocity gradient of the ground boundary layer. A torsional vibration isolating coupling may be required in the generator drive to reduce the loads due to this vibratory torque. An inclined flapping hinge also is desirable to cause pitch-flap coupling that will suppress blade flap motions.

An estimate of the cost of burnout on early retirement and reduction in clinical hours of practicing physicians in Canada

Science.gov (United States)

2014-01-01

Background Interest in the impact of burnout on physicians has been growing because of the possible burden this may have on health care systems. The objective of this study is to estimate the cost of burnout on early retirement and reduction in clinical hours of practicing physicians in Canada. Methods Using an economic model, the costs related to early retirement and reduction in clinical hours of physicians were compared for those who were experiencing burnout against a scenario in which they did not experience burnout. The January 2012 Canadian Medical Association Masterfile was used to determine the number of practicing physicians. Transition probabilities were estimated using 2007–2008 Canadian Physician Health Survey and 2007 National Physician Survey data. Adjustments were also applied to outcome estimates based on ratio of actual to planned retirement and reduction in clinical hours. Results The total cost of burnout for all physicians practicing in Canada is estimated to be $213.1 million ($185.2 million due to early retirement and $27.9 million due to reduced clinical hours). Family physicians accounted for 58.8% of the burnout costs, followed by surgeons for 24.6% and other specialists for 16.6%. Conclusion The cost of burnout associated with early retirement and reduction in clinical hours is substantial and a significant proportion of practicing physicians experience symptoms of burnout. As health systems struggle with human resource shortages and expanding waiting times, this estimate sheds light on the extent to which the burden could be potentially decreased through prevention and promotion activities to address burnout among physicians. PMID:24927847

Model reduction by weighted Component Cost Analysis

Science.gov (United States)

Kim, Jae H.; Skelton, Robert E.

1990-01-01

Component Cost Analysis considers any given system driven by a white noise process as an interconnection of different components, and assigns a metric called 'component cost' to each component. These component costs measure the contribution of each component to a predefined quadratic cost function. A reduced-order model of the given system may be obtained by deleting those components that have the smallest component costs. The theory of Component Cost Analysis is extended to include finite-bandwidth colored noises. The results also apply when actuators have dynamics of their own. Closed-form analytical expressions of component costs are also derived for a mechanical system described by its modal data. This is very useful to compute the modal costs of very high order systems. A numerical example for MINIMAST system is presented.

Dietary fibre intakes and reduction in functional constipation rates among Canadian adults: a cost-of-illness analysis

Directory of Open Access Journals (Sweden)

Mohammad M. H. Abdullah

2015-12-01

Full Text Available Background: Evidence-based research highlights beneficial impacts of dietary fibre on several aspects of the gut pathophysiology that are accompanied by a considerable financial burden in healthcare services. Recommended intakes of dietary fibre may thus associate with financial benefits at a population level. Objective: We sought to systematically assess the potential annual savings in healthcare costs that would follow the reduction in rates of functional constipation and irregularity with increased dietary fibre intakes among Canadian adults. Design: A cost-of-illness analysis was developed on the basis of current and recommended levels of fibre intake in Canada, constipation reduction per 1 g fibre intake, proportion of adults who are likely to consume fibre-rich diets, and population expected to respond to fibre intake. Sensitivity analyses covering a range of assumptions were further implemented within the economic simulation. Results: Our literature searches assumed a 1.8% reduction in constipation rates with each 1 g/day increase in fibre intake. With intakes corresponding to the Institute of Medicine's adequate levels of 38 g/day for men and 25 g/day for women, among 5 and 100% of the adult populations, anywhere between CAD$1.5 and CAD$31.9 million could be saved on constipation-related healthcare costs annually. Each 1 g/day increase in dietary fibre was estimated to result in total annual healthcare cost savings that ranged between CAD$0.1 and CAD$2.5 million. Conclusions: The present research suggests an economic value of increasing dietary fibre intake beyond its well-known health benefits. Healthy-eating behaviours consistent with the recommended intakes of dietary fibre by the general public should hence be advocated as a practical approach for reducing costs associated with the management of constipation in Canada.

Estimate of the technological costs of CO{sub 2} emission reductions in passenger cars. Emission reduction potentials and their costs; Technikkostenschaetzung fuer die CO{sub 2}-Emissionsminderung bei Pkw. Emissionsminderungspotenziale und ihre Kosten

Energy Technology Data Exchange (ETDEWEB)

Herbener, Reinhard; Jahn, Helge; Wetzel, Frank [Umweltbundesamt, Dessau-Rosslau (Germany). Fachgebiet I 3.2 - Schadstoffminderung und Energieeinsparung im Verkehr

2008-08-06

The Federal Environmental Office intended to identify the current fuel consumption reduction potential and the cost of efficiency-enhancing measures on passenger cars. For this purpose, an extensive bibliographic search was carried out, and experts from research institutes and from the automobile supplier industry were asked for their opinion. The results are published in table form. (orig.)

Blood pressure reduction, persistence and costs in the evaluation of antihypertensive drug treatment – a review

Directory of Open Access Journals (Sweden)

Hasford Joerg

2009-03-01

Full Text Available Abstract Background Blood pressure lowering drugs are usually evaluated in short term trials determining the absolute blood pressure reduction during trough and the duration of the antihypertensive effect after single or multiple dosing. A lack of persistence with treatment has however been shown to be linked to a worse cardiovascular prognosis. This review explores the blood pressure reduction and persistence with treatment of antihypertensive drugs and the cost consequences of poor persistence with pharmaceutical interventions in arterial hypertension. Methods We have searched the literature for data on blood pressure lowering effects of different antihypertensive drug classes and agents, on persistence with treatment, and on related costs. Persistence was measured as patients' medication possession rate. Results are presented in the form of a systematic review. Results Angiotensin II receptor blocker (ARBs have a competitive blood pressure lowering efficacy compared with ACE-inhibitors (ACEi and calcium channel blockers (CCBs, beta-blockers (BBs and diuretics. 8 studies describing the persistence with treatment were identified. Patients were more persistent on ARBs than on ACEi and CCBs, BBs and diuretics. Thus the product of blood pressure lowering and persistence was higher on ARBs than on any other drug class. Although the price per tablet of more recently developed drugs (ACEi, ARBs is higher than that of older ones (diuretics and BBs, the newer drugs result in a more favourable cost to effect ratio when direct drug costs and indirect costs are also considered. Conclusion To evaluate drugs for the treatment of hypertension several key variables including the blood pressure lowering effect, side effects, compliance/persistence with treatment, as well as drug costs and direct and indirect costs of medical care have to be considered. ARBs, while nominally more expensive when drug costs are considered only, provide substantial cost savings

Cost reduction in PV manufacturing. Impact on grid-connected and building-integrated markets

International Nuclear Information System (INIS)

Maycock, Paul D.

1997-01-01

In the past three years there have been several key events or changes that can lead to fully economic, massive deployment to the grid-connected and central PV markets. The factors discussed in this report include: (1) significant cost reduction in single crystal and polycrystal silicon so that modules profitably priced at $3.10-$3.30 per peak watt and installed grid-connected systems with installed cost of $5.50 per watt are being offered; (2) several new thin film plants - amorphous silicon, cadmium telluride, and copper indium diselenide are being built for 1996, 1997 production with greatly reduced costs; (3) government subsidized volume orders for PV in grid-connected houses (Japan, Germany, Switzerland, Italy, and the United States) provide volume (2000+ units per year) that lead to reduced costs; (4) environmental benefits for PV are being applied in Europe and Japan permitting 'early adopters' to enter the market; and (5) government and commercial acceptance of PV building integrated products, especially in Europe, are expanding PV markets. The combination of these forces lead to the prediction that an 'accelerated' market mode could start in the year 2000

A variation reduction allocation model for quality improvement to minimize investment and quality costs by considering suppliers’ learning curve

Science.gov (United States)

Rosyidi, C. N.; Jauhari, WA; Suhardi, B.; Hamada, K.

2016-02-01

Quality improvement must be performed in a company to maintain its product competitiveness in the market. The goal of such improvement is to increase the customer satisfaction and the profitability of the company. In current practice, a company needs several suppliers to provide the components in assembly process of a final product. Hence quality improvement of the final product must involve the suppliers. In this paper, an optimization model to allocate the variance reduction is developed. Variation reduction is an important term in quality improvement for both manufacturer and suppliers. To improve suppliers’ components quality, the manufacturer must invest an amount of their financial resources in learning process of the suppliers. The objective function of the model is to minimize the total cost consists of investment cost, and quality costs for both internal and external quality costs. The Learning curve will determine how the employee of the suppliers will respond to the learning processes in reducing the variance of the component.

Industrial cost effective n-pasha solar cells with >20% efficiency

Energy Technology Data Exchange (ETDEWEB)

Romijn, I.G.; Van Aken, B.; Anker, J.; Barton, P.; Gutjahr, A.; Komatsu, Y.; Koppes, M.; Kossen, E.J.; Lamers, M.; Saynova, D.S.; Tool, C.J.J.; Zhang, Y. [ECN Solar Energy, P.O. Box 1, NL-1755 ZG Petten (Netherlands); Venema, P.R.; Vlooswijk, A.H.G. [Tempress Systems BV, Radeweg 31, 8171 MD Vaassen (Netherlands); Schmitt, C.; Kuehnlein, H.; Bay, N. [RENA GmbH, Hans-Bunte-Strasse 19, D-79108, Freiburg im Breisgau (Germany); Koenig, M.; Stassen, A.F. [Heraeus Precious Metals GmbH and Co. KG, Heraeusstrasse 12-14, D-63450, Hanau (Germany)

2013-10-15

The n-Pasha cell is a bifacial solar cell concept with average efficiencies between 19.8% and 20% and is optimized to enable high efficiencies with narrow distribution on wafers from the complete n-type ingots (2 to 10 {omega}-cm). This reduces the yield losses from a wafer point of view, which is important since the wafer costs make up the largest part ({approx}40%) of the total module costs for n-Pasha modules. The module fabrication itself adds up to {approx}35% of the module costs/Wp costs, which leaves {approx}25% of the costs/Wp for the cell production. We found that the costs/Wp for the 20% n-Pasha cell and module process are very similar to those of a 19% p-type cell, assuming similar wafer and module manufacturing costs. In the paper the successful implementation of a reduction of >60% in BBr{sub 3} consumption, and a reduction of >50% in Ag consumption are described, while keeping the n-Pasha cell efficiency at the same level. According to our calculations, the achieved reduction of the Ag and BBr{sub 3} consumption will lower the costs/Wp for n-Pasha modules below that of p-type. The majority of the efficiency losses in the n-Pasha cell are due to recombination in the diffused layers and below the contact regions. By tuning both the emitter and BSF profile, an efficiency gain of 0.4% absolute has been obtained. Based on the simulations and experimental results, the path towards further optimization and efficiencies approaching 21% is shown.

Examining the production costs of antiretroviral drugs.

Science.gov (United States)

Pinheiro, Eloan; Vasan, Ashwin; Kim, Jim Yong; Lee, Evan; Guimier, Jean Marc; Perriens, Joseph

2006-08-22

To present direct manufacturing costs and price calculations of individual antiretroviral drugs, enabling those responsible for their procurement to have a better understanding of the cost structure of their production, and to indicate the prices at which these antiretroviral drugs could be offered in developing country markets. Direct manufacturing costs and factory prices for selected first and second-line antiretroviral drugs were calculated based on cost structure data from a state-owned company in Brazil. Prices for the active pharmaceutical ingredients (API) were taken from a recent survey by the World Health Organization (WHO). The calculated prices for antiretroviral drugs are compared with quoted prices offered by privately-owned, for-profit manufacturers. The API represents the largest component of direct manufacturing costs (55-99%), while other inputs, such as salaries, equipment costs, and scale of production, have a minimal impact. The calculated prices for most of the antiretroviral drugs studied fall within the lower quartile of the range of quoted prices in developing country markets. The exceptions are those drugs, primarily for second-line therapy, for which the API is either under patent, in short supply, or in limited use in developing countries (e.g. abacavir, lopinavir/ritonavir, nelfinavir, saquinavir). The availability of data on the cost of antiretroviral drug production and calculation of factory prices under a sustainable business model provide benchmarks that bulk purchasers of antiretroviral drugs could use to negotiate lower prices. While truly significant price decreases for antiretroviral drugs will depend largely on the future evolution of API prices, the present study demonstrates that for several antiretroviral drugs price reduction is currently possible. Whether or not these reductions materialize will depend on the magnitude of indirect cost and profit added by each supplier over the direct production costs. The ability to

'EPRI tailored collaboration 2, Crystal River cost and volume reduction program'

International Nuclear Information System (INIS)

Genoa, P.H.

1995-01-01

During the fall of 1993. Florida Power Corporation joined the EPRI tailored collaboration on the low-level radioactive waste cost and volume reduction. In conjunction with an existing Radwaste Task Force, the EPRI team reviewed past and current waste management practices and developed a prioritized list of opportunities for improvement. In the first quarter of 1994, these opportunities were converted into Action Plans with responsibilities and due dates assigned to support a 60-day refueling outage beginning on April 7, 1994. The Action Plans focussed on: (1) Visible management support in the form of specific plant, department, and worker level radwaste reduction goals. (2) Heightened worker awareness in the form of training (formal and informal), signs, bulletins, and a radwaste awareness video. (3) Material changes from disposable to recyclables, non-incinerables to incinerables, liquid waste processing media replacements and filter use criteria. (4) Work practice changes to reduce valve leaks, reduce contaminated areas, reduce entries to contaminated areas, further segregation of waste streams including 'green is clean' wastes

The costs of reducing the excess CO{sub 2} emissions. Reduction potential and costs in certain sector; Hvad koster det at reducere CO{sup 2}-mankoen? - Reduktionspotentiale og omkostninger i udvalgte sektorer

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-07-01

The report presents the results from the project 'The costs of reducing the excess CO{sub 2} emissions - reduction potential and costs in certain sectors'. The aim of the project has been to elucidate the full extent of the reduction potentials and the costs for certain CO{sub 2} reducing initiatives, which are not included in the present projections of the excess CO{sub 2} emissions. The initiatives included in this report are: Accumulation of methane from Danish disposal facilities; Accumulation of methane from disposal facilities in Russia; Reduction in the use of industrial greenhouse gases; Aquifer disposal of CO{sub 2} in the underground; Offshore CO{sub 2} disposal in oil fields in the North Sea. Furthermore, the report presents a general evaluation of the potential of methane accumulation from wastewater treatment. (ba)

Development of Production PVD-AIN Buffer Layer System and Processes to Reduce Epitaxy Costs and Increase LED Efficiency

Energy Technology Data Exchange (ETDEWEB)

Cerio, Frank

2013-09-14

The DOE has set aggressive goals for solid state lighting (SSL) adoption, which require manufacturing and quality improvements for virtually all process steps leading to an LED luminaire product. The goals pertinent to this proposed project are to reduce the cost and improve the quality of the epitaxial growth processes used to build LED structures. The objectives outlined in this proposal focus on achieving cost reduction and performance improvements over state-of-the-art, using technologies that are low in cost and amenable to high efficiency manufacturing. The objectives of the outlined proposal focus on cost reductions in epitaxial growth by reducing epitaxy layer thickness and hetero-epitaxial strain, and by enabling the use of larger, less expensive silicon substrates and would be accomplished through the introduction of a high productivity reactive sputtering system and an effective sputtered aluminum-nitride (AlN) buffer/nucleation layer process. Success of the proposed project could enable efficient adoption of GaN on-silicon (GaN/Si) epitaxial technology on 150mm silicon substrates. The reduction in epitaxy cost per cm{sup 2} using 150mm GaN-on-Si technology derives from (1) a reduction in cost of ownership and increase in throughput for the buffer deposition process via the elimination of MOCVD buffer layers and other throughput and CoO enhancements, (2) improvement in brightness through reductions in defect density, (3) reduction in substrate cost through the replacement of sapphire with silicon, and (4) reduction in non-ESD yield loss through reductions in wafer bow and temperature variation. The adoption of 150mm GaN/Si processing will also facilitate significant cost reductions in subsequent wafer fabrication manufacturing costs. There were three phases to this project. These three phases overlap in order to aggressively facilitate a commercially available production GaN/Si capability. In Phase I of the project, the repeatability of the performance

Modeling Fuel Treatment Leverage: Encounter Rates, Risk Reduction, and Suppression Cost Impacts

Directory of Open Access Journals (Sweden)

Matthew P. Thompson

2017-11-01

Full Text Available The primary theme of this study is the cost-effectiveness of fuel treatments at multiple scales of investment. We focused on the nexus of fuel management and suppression response planning, designing spatial fuel treatment strategies to incorporate landscape features that provide control opportunities that are relevant to fire operations. Our analysis explored the frequency and magnitude of fire-treatment encounters, which are critical determinants of treatment efficacy. Additionally, we examined avoided area burned, avoided suppression costs, and avoided damages, and combined all three under the umbrella of leverage to explore multiple dimensions with which to characterize return on investment. We chose the Sierra National Forest, California, USA, as our study site, due to previous work providing relevant data and analytical products, and because it has the potential for large, long-duration fires and corresponding potential for high suppression expenditures. Modeling results generally confirmed that fire-treatment encounters are rare, such that median suppression cost savings are zero, but in extreme years, savings can more than offset upfront investments. Further, reductions in risk can expand areas where moderated suppression response would be appropriate, and these areas can be mapped in relation to fire control opportunities.

Cost reduction in the production process using the ABC and Lean tools: Case Study in the refrigeration components industry

Directory of Open Access Journals (Sweden)

Levi da Silva Guimarães

2015-03-01

Full Text Available This paper focuses on production management with respect to operating costs that relate directly to the value of the product. For this study, three methods were used, ABC - Activity Based Costing, which provides accurate information about the knowledge of the real costs, VSM - Value Stream Mapping and Lean Manufacturing. The method adopted for this research was the case study. The study was conducted at a refrigeration components company in the Industrial Center of Manaus. The analyses and observations initially went through the process of mapping the value stream, measuring the current state of activities (cycle time, setup, etc.. After analysis it was possible to map the cost for each activity and finally calculate the cost of the product before and after the improvements resulting from the lean methodology. The results obtained in this study showed a 20% reduction in product costs resulting from operational improvements. The activity-based cost led to a discovery of the real costs of waste. The steps for this study include process mapping through the value stream, measuring the current state of activities (cycle time, setup, etc., establishing the cost driver for each activity, and finally calculating the cost of the product before and after the application of lean improvements. The paper was conducted through literature and descriptive review, and used a case study method. It describes the model that has been tested in a production line for a refrigeration components company from the Manaus Industrial Center, achieving a 20% reduction in product cost.

"Water-in-salt" electrolytes enable the use of cost-effective aluminum current collectors for aqueous high-voltage batteries.

Science.gov (United States)

Kühnel, R-S; Reber, D; Remhof, A; Figi, R; Bleiner, D; Battaglia, C

2016-08-16

The extended electrochemical stability window offered by highly concentrated electrolytes allows the operation of aqueous batteries at voltages significantly above the thermodynamic stability limit of water, at which the stability of the current collector potentially limits the cell voltage. Here we report the observation of suppressed anodic dissolution of aluminum in "water-in-salt" electrolytes enabling roll-to-roll electrode fabrication for high-voltage aqueous lithium-ion batteries on cost-effective light-weight aluminum current collectors using established lithium-ion battery technology.

A Sensitivity Analysis of Timing and Costs of Greenhouse Gas Emission Reductions

International Nuclear Information System (INIS)

Gerlagh, R.; Van der Zwaan, B.

2004-01-01

This paper analyses the optimal timing and macro-economic costs of carbon emission reductions that mitigate the global average atmospheric temperature increase. We use a macro-economic model in which there are two competing energy sources, fossil-fuelled and non-fossil-fuelled. Technological change is represented endogenously through learning curves, and niche markets exist implying positive demand for the relatively expensive non-fossil-fuelled energy source. Under these conditions, with a temperature increase constraint of 2C, early abatement is found to be optimal, and, compared to the results of many existing top-down models, the costs of this strategy prove to be low. We perform an extensive sensitivity analysis of our results regarding the uncertainties that dominate various economic and technological modeling parameters. Uncertainties in the learning rate and the elasticity of substitution between the two different energy sources most significantly affect the robustness of our findings

Additively Manufactured Low Cost Upper Stage Combustion Chamber

Science.gov (United States)

Protz, Christopher; Cooper, Ken; Ellis, David; Fikes, John; Jones, Zachary; Kim, Tony; Medina, Cory; Taminger, Karen; Willingham, Derek

2016-01-01

Over the past two years NASA's Low Cost Upper Stage Propulsion (LCUSP) project has developed Additive Manufacturing (AM) technologies and design tools aimed at reducing the costs and manufacturing time of regeneratively cooled rocket engine components. High pressure/high temperature combustion chambers and nozzles must be regeneratively cooled to survive their operating environment, causing their design fabrication to be costly and time consuming due to the number of individual steps and different processes required. Under LCUSP, AM technologies in Sintered Laser Melting (SLM) GRCop-84 and Electron Beam Freeform Fabrication (EBF3) Inconel 625 have been significantly advanced, allowing the team to successfully fabricate a 25k-class regenerative chamber. Estimates of the costs and schedule of future builds indicate cost reductions and significant schedule reductions will be enabled by this technology. Characterization of the microstructural and mechanical properties of the SLM-produced GRCop-84, EBF3 Inconel 625 and the interface layer between the two has been performed and indicates the properties will meet the design requirements. The LCUSP chamber is to be tested with a previously demonstrated SLM injector in order to advance the Technology Readiness Level (TRL) and demonstrate the capability of the application of these processes. NASA is advancing these technologies to reduce cost and schedule for future engine applications and commercial needs.

Cost assessment and ecological effectiveness of nutrient reduction options for mitigating Phaeocystis colony blooms in the Southern North Sea: an integrated modeling approach.

Science.gov (United States)

Lancelot, Christiane; Thieu, Vincent; Polard, Audrey; Garnier, Josette; Billen, Gilles; Hecq, Walter; Gypens, Nathalie

2011-05-01

Nutrient reduction measures have been already taken by wealthier countries to decrease nutrient loads to coastal waters, in most cases however, prior to having properly assessed their ecological effectiveness and their economic costs. In this paper we describe an original integrated impact assessment methodology to estimate the direct cost and the ecological performance of realistic nutrient reduction options to be applied in the Southern North Sea watershed to decrease eutrophication, visible as Phaeocystis blooms and foam deposits on the beaches. The mathematical tool couples the idealized biogeochemical GIS-based model of the river system (SENEQUE-RIVERSTRAHLER) implemented in the Eastern Channel/Southern North Sea watershed to the biogeochemical MIRO model describing Phaeocystis blooms in the marine domain. Model simulations explore how nutrient reduction options regarding diffuse and/or point sources in the watershed would affect the Phaeocystis colony spreading in the coastal area. The reference and prospective simulations are performed for the year 2000 characterized by mean meteorological conditions, and nutrient reduction scenarios include and compare upgrading of wastewater treatment plants and changes in agricultural practices including an idealized shift towards organic farming. A direct cost assessment is performed for each realistic nutrient reduction scenario. Further the reduction obtained for Phaeocystis blooms is assessed by comparison with ecological indicators (bloom magnitude and duration) and the cost for reducing foam events on the beaches is estimated. Uncertainty brought by the added effect of meteorological conditions (rainfall) on coastal eutrophication is discussed. It is concluded that the reduction obtained by implementing realistic environmental measures on the short-term is costly and insufficient to restore well-balanced nutrient conditions in the coastal area while the replacement of conventional agriculture by organic farming

Low cost and thin metasurface for ultra wide band and wide angle polarization insensitive radar cross section reduction

Science.gov (United States)

Ameri, Edris; Esmaeli, Seyed Hassan; Sedighy, Seyed Hassan

2018-05-01

A planar low cost and thin metasurface is proposed to achieve ultra-wideband radar cross section (RCS) reduction with stable performance with respect to polarization and incident angles. This metasurface is composed of two different artificial magnetic conductor unit cells arranged in a chessboard like configuration. These unit cells have a Jerusalem cross pattern with different thicknesses, which results in wideband out-phase reflection and RCS reduction, consequently. The designed metasurface reduces RCS more than 10-dB from 13.6 GHz to 45.5 GHz (108% bandwidth) and more than 20-dB RCS from 15.2 GHz to 43.6 GHz (96.6%). Moreover, the 10-dB RCS reduction bandwidth is very stable (more than 107%) for both TE and TM polarizations. The good agreement between simulations and measurement results proves the design, properly. The ultra-wide bandwidth, low cost, low profile, and stable performance of this metasurface prove its high capability compared with the state-of-the-art references.

Cost-Sharing Contracts for Energy Saving and Emissions Reduction of a Supply Chain under the Conditions of Government Subsidies and a Carbon Tax

Directory of Open Access Journals (Sweden)

Yi Yuyin

2018-03-01

Full Text Available To study the cooperation of upstream and downstream enterprises of a supply chain in energy saving and emissions reduction, we establish a Stackelberg game model. The retailer moves first to decide a cost-sharing contract, then the manufacturer determines the energy-saving level, carbon-emission level, and wholesale price successively. In the end, the retailer determines the retail price. As a regulation, the government provides subsidies for energy-saving products, while imposing a carbon tax on the carbon emitted. The results show that (1 both the energy-saving cost-sharing (ECS and the carbon emissions reduction cost-sharing (CCS contracts are not the dominant strategy of the two parties by which they can facilitate energy savings and emissions reductions; (2 compared with single cost-sharing contracts, the bivariate cost-sharing (BCS contract for energy saving and emissions reduction is superior, although it still cannot realise prefect coordination of the supply chain; (3 government subsidy and carbon tax policies can promote the cooperation of both the upstream and downstream enterprises of the supply chain—a subsidy policy can always drive energy saving and emissions reductions, while a carbon tax policy does not always exert positive effects, as it depends on the initial level of pollution and the level of carbon tax; and (4 the subsidy policy reduces the coordination efficiency of the supply chain, while the influences of carbon tax policy upon the coordination efficiency relies on the initial carbon-emission level.

48 CFR 970.5215-4 - Cost reduction.

Science.gov (United States)

2010-10-01

.... Development cost is the Contractor cost of up-front planning, engineering, prototyping, and testing of a... contractual arrangement and the justification for its use; and (ii) A detailed cost/price estimate and...

Reduction in sick leave and costs to society of patients with Meniere's disease after treatment of temporomandibular and cervical spine disorders: a controlled six-year cost-benefit study.

Science.gov (United States)

Bjorne, Assar; Agerberg, Göran

2003-04-01

This study compares the frequency of sick leave between the three-year period after and the three-year period before coordinated treatment of temporomandibular and cervical spine disorders in 24 patients (ten males and 14 females) diagnosed with Meniere's disease. The frequency of sick leave for the patients was also compared with the frequency of sick leave in a control group from the population. A cost-benefit analysis was made regarding the costs to society of sick leave related to the treatment costs of the patients. In a previous study the same patients were treated for their severe signs and symptoms of temporomandibular and cervical spine disorders, and they reported a substantial reduction in their vertigo, non-whirling dizziness, tinnitus, feeling of fullness in the ear, pain in the face and jaws, pain in the neck and shoulders, and headache. The number of days of sick leave and the year the patient began to receive disability pension due to the symptoms of Meniere's disease were obtained from the National Health Insurance Service in Sweden. Two of the patients received disability pension benefits due to Meniere's disease 17 years prior to their normal retirement pension. A third patient received disability pension for another reason and two were receiving a retirement pension. Data on the remaining 19 patients showed a considerable reduction in number of days of sick leave during the three-year period after coordinated treatment (270 days) compared with the three-year period before the treatment (1,536 days). The control subjects used a total of 14 days sick leave for the same symptoms during the same six-year period. Vertigo (nine days) was the dominant cause followed by pain in the neck and shoulders, and headache. The reduction in sick leave for the 19 nonretired patients and the treatment costs for the 24 patients can be used for a simple cost-benefit calculation for the subgroup of nonretired patients. During the first three years after treatment the

Strategies for net cost reductions with the expanded role and expertise of anesthesiologists in the perioperative surgical home.

Science.gov (United States)

Dexter, Franklin; Wachtel, Ruth E

2014-05-01

The Perioperative Surgical Home is a model adopted by the American Society of Anesthesiologists to increase quality and patient safety and to decrease costs. This Special Article is about the latter topic. Using narrative review, we show that there are two principal opportunities for net cost reduction. One opportunity is to reduce unnecessary interventions that do not have potential to benefit patients (e.g., preoperative laboratory studies in healthy patients undergoing low-risk surgery and use of substantial fresh gas flows with volatile anesthetics). The other opportunity is to optimize staff scheduling, case scheduling, and staff assignment. These two are the same as the principal ways that a positive return on investment can be achieved from use of an anesthesia information management system. Three other opportunities are much less likely to achieve as large (if any) net cost reduction among all patients but may at some hospitals. These are to reduce cancellations, operating room times, and/or hospital postoperative lengths of stay.

Comparison of cost effectiveness of risk reduction among different energy systems: French case studies. Final report for the period 1 May 1982 - 20 February 1988

International Nuclear Information System (INIS)

Lochard, J.

1989-08-01

The report presents the three French case studies performed in the framework of the co-ordinated research programme on ''Comparison of Cost-Effectiveness of Risk Reduction Among Different Energy Systems'': cost-effectiveness of robotics and remote tooling for occupational risk reduction at a nuclear fuel fabrication facility; cost-effectiveness of protection actions to reduce occupational exposure in underground uranium mines; cost effectiveness of safety measures to reduce public risk associated with the transportation of UF 6 by truck and trains. Figs and tabs

Evaluation of potential cost reductions from improved amine-based CO2 capture systems

International Nuclear Information System (INIS)

Rao, Anand B.; Rubin, Edward S.; Keith, David W.; Granger Morgan, M.

2006-01-01

Technological innovations in CO 2 capture and storage technologies are being pursued worldwide under a variety of private and government-sponsored R and D programs. While much of this R and D is directed at novel concepts and potential breakthrough technologies, there are also substantial efforts to improve CO 2 capture technologies already in use. In this paper, we focus on amine-based CO 2 capture systems for power plants and other combustion-based applications. The current performance and cost of such systems have been documented in several recent studies. In this paper we examine the potential for future cost reductions that may result from continued process development. We used the formal methods of expert elicitation to understand what experts in this field believe about possible improvements in some of the key underlying parameters that govern the performance and cost of this technology. A dozen leading experts from North America, Europe and Asia participated in this study, providing their probabilistic judgments via a detailed questionnaire coupled with individual interviews. Judgments about detailed technical parameters were then used in an integrated power plant modeling framework (IECM-CS) developed for USDOE to evaluate the performance and costs of alternative carbon capture and sequestration technologies for fossil-fueled power plants. The experts' responses have allowed us to build a picture of how the overall performance and cost of amine-based systems might improve over the next decade or two. Results show how much the cost of CO 2 capture could be reduced via targeted R and D in key areas

Reduction - competitive tomorrow

International Nuclear Information System (INIS)

Worley, L.; Bargerstock, S.

1995-01-01

Inventory reduction is one of the few initiatives that represent significant cost-reduction potential that does not result in personnel reduction. Centerior Energy's Perry nuclear power plant has embarked on an aggressive program to reduce inventory while maintaining plant material availability. Material availability to the plant was above 98%, but at an unacceptable 1994 inventory book value of $47 million with inventory carrying costs calculated at 30% annually

Renewables vs. energy efficiency: The cost of carbon emissions reduction in Spain

International Nuclear Information System (INIS)

López-Peña, Álvaro; Pérez-Arriaga, Ignacio; Linares, Pedro

2012-01-01

While support instruments have succeeded to largely deploy renewables during the 1996–2008 period, little attention has been paid to energy efficiency measures, resulting in a high energy intensity and large growth of energy demand. Energy-related CO 2 emissions have increased significantly. At the same time, important investments in combined cycle gas turbines have taken place. This paper analyses whether, from a cost minimization viewpoint, renewable support has been the best policy for reducing emissions, when compared to the promotion of energy efficiency in sectors such as transportation or buildings. We use a model of the Spanish energy sector to examine its evolution in the time period considered under different policies. It is a bottom-up, static, partial equilibrium, linear programming model of the complete Spanish energy system. We conclude that demand side management (DSM) clearly dominates renewable energy (RE) support if the reduction of emissions at minimum cost is the only concern. We also quantify the savings that could have been achieved: a total of €5 billion per year, mainly in RE subsidies and in smaller costs of meeting the reduced demand (net of DSM implementation cost). - Highlights: ► Energy efficiency is cheaper than renewables for reducing carbon emissions. ► Energy efficiency measures could have saved more than €5 billion per year in Spain. ► Savings could have been bigger without overcapacity in gas combined cycles.

A Spatial-Economic Cost-Reduction Pathway Analysis for U.S. Offshore Wind Energy Development from 2015–2030

Energy Technology Data Exchange (ETDEWEB)

Beiter, Philipp [National Renewable Energy Lab. (NREL), Golden, CO (United States); Musial, Walter [National Renewable Energy Lab. (NREL), Golden, CO (United States); Smith, Aaron [National Renewable Energy Lab. (NREL), Golden, CO (United States); Kilcher, Levi [National Renewable Energy Lab. (NREL), Golden, CO (United States); Damiani, Rick [National Renewable Energy Lab. (NREL), Golden, CO (United States); Maness, Michael [National Renewable Energy Lab. (NREL), Golden, CO (United States); Sirnivas, Senu [National Renewable Energy Lab. (NREL), Golden, CO (United States); Stehly, Tyler [National Renewable Energy Lab. (NREL), Golden, CO (United States); Gevorgian, Vahan [National Renewable Energy Lab. (NREL), Golden, CO (United States); Mooney, Meghan [National Renewable Energy Lab. (NREL), Golden, CO (United States); Scott, George [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2016-09-01

This report describes a comprehensive effort undertaken by the National Renewable Energy Laboratory (NREL) to understand the cost of offshore wind energy for markets in the United States. The study models the cost impacts of a range of offshore wind locational cost variables for more than 7,000 potential coastal sites in U.S. offshore wind resource areas. It also assesses the impact of more than 50 technology innovations on potential future costs for both fixed-bottom and floating wind systems. Comparing these costs to an initial site-specific assessment of local avoided generating costs, the analysis provides a framework for estimating the economic potential for offshore wind. The analysis is intended to inform a broad set of stakeholders and enable an assessment of offshore wind as part of energy development and energy portfolio planning. It provides information that federal and state agencies and planning commissions could use to inform initial strategic decisions about offshore wind developments in the United States.

The health gains and cost savings of dietary salt reduction interventions, with equity and age distributional aspects

Directory of Open Access Journals (Sweden)

Nhung Nghiem

2016-05-01

Full Text Available Abstract Background A “diet high in sodium” is the second most important dietary risk factor for health loss identified in the Global Burden of Disease Study 2013. We therefore aimed to model health gains and costs (savings of salt reduction interventions related to salt substitution and maximum levels in bread, including by ethnicity and age. We also ranked these four interventions compared to eight other modelled interventions. Methods A Markov macro-simulation model was used to estimate QALYs gained and net health system costs for four dietary sodium reduction interventions, discounted at 3 % per annum. The setting was New Zealand (NZ (2.3 million adults, aged 35+ years which has detailed individual-level administrative cost data. Results The health gain was greatest for an intervention where most (59 % of the sodium in processed foods was replaced by potassium and magnesium salts. This intervention gained 294,000 QALYs over the remaining lifetime of the cohort (95 % UI: 238,000 to 359,000; 0.13 QALY per 35+ year old. Such salt substitution also produced the highest net cost-savings of NZ$ 1.5 billion (US$ 1.0 billion (95 % UI: NZ$ 1.1 to 2.0 billion. All interventions generated relatively larger per capita QALYs for men vs women and for the indigenous Māori population vs non-Māori (e.g., 0.16 vs 0.12 QALYs per adult for the 59 % salt substitution intervention. Of relevance to workforce productivity, in the first 10 years post-intervention, 22 % of the QALY gain was among those aged <65 years (and 37 % for those aged <70. Conclusions The benefits are consistent with the international literature, with large health gains and cost savings possible from some, but not all, sodium reduction interventions. Health gain appears likely to occur among working-age adults and all interventions contributed to reducing health inequalities.

Quantifying the total cost of infrastructure to enable environmentally preferable decisions: the case of urban roadway design

Science.gov (United States)

Gosse, Conrad A.; Clarens, Andres F.

2013-03-01

Efforts to reduce the environmental impacts of transportation infrastructure have generally overlooked many of the efficiencies that can be obtained by considering the relevant engineering and economic aspects as a system. Here, we present a framework for quantifying the burdens of ground transportation in urban settings that incorporates travel time, vehicle fuel and pavement maintenance costs. A Pareto set of bi-directional lane configurations for two-lane roadways yields non-dominated combinations of lane width, bicycle lanes and curb parking. Probabilistic analysis and microsimulation both show dramatic mobility reductions on road segments of insufficient width for heavy vehicles to pass bicycles without encroaching on oncoming traffic. This delay is positively correlated with uphill grades and increasing traffic volumes and inversely proportional to total pavement width. The response is nonlinear with grade and yields mixed uphill/downhill optimal lane configurations. Increasing bicycle mode share is negatively correlated with total costs and emissions for lane configurations allowing motor vehicles to safely pass bicycles, while the opposite is true for configurations that fail to facilitate passing. Spatial impacts on mobility also dictate that curb parking exhibits significant spatial opportunity costs related to the total cost Pareto curve. The proposed framework provides a means to evaluate relatively inexpensive lane reconfiguration options in response to changing modal share and priorities. These results provide quantitative evidence that efforts to reallocate limited pavement space to bicycles, like those being adopted in several US cities, could appreciably reduce costs for all users.

Quantifying the total cost of infrastructure to enable environmentally preferable decisions: the case of urban roadway design

International Nuclear Information System (INIS)

Gosse, Conrad A; Clarens, Andres F

2013-01-01

Efforts to reduce the environmental impacts of transportation infrastructure have generally overlooked many of the efficiencies that can be obtained by considering the relevant engineering and economic aspects as a system. Here, we present a framework for quantifying the burdens of ground transportation in urban settings that incorporates travel time, vehicle fuel and pavement maintenance costs. A Pareto set of bi-directional lane configurations for two-lane roadways yields non-dominated combinations of lane width, bicycle lanes and curb parking. Probabilistic analysis and microsimulation both show dramatic mobility reductions on road segments of insufficient width for heavy vehicles to pass bicycles without encroaching on oncoming traffic. This delay is positively correlated with uphill grades and increasing traffic volumes and inversely proportional to total pavement width. The response is nonlinear with grade and yields mixed uphill/downhill optimal lane configurations. Increasing bicycle mode share is negatively correlated with total costs and emissions for lane configurations allowing motor vehicles to safely pass bicycles, while the opposite is true for configurations that fail to facilitate passing. Spatial impacts on mobility also dictate that curb parking exhibits significant spatial opportunity costs related to the total cost Pareto curve. The proposed framework provides a means to evaluate relatively inexpensive lane reconfiguration options in response to changing modal share and priorities. These results provide quantitative evidence that efforts to reallocate limited pavement space to bicycles, like those being adopted in several US cities, could appreciably reduce costs for all users. (letter)

Comparison of cost effectiveness of risk reduction among different energy systems: French case studies. Final report for the period 1 May 1982 - 20 February 1988

Energy Technology Data Exchange (ETDEWEB)

Lochard, J [CEPN Centre d` Etude sur l` Evaluation de la Protection dans le Domaine Nucleaire, Fontenay-Aux-Roses (France)

1989-08-01

The report presents the three French case studies performed in the framework of the co-ordinated research programme on ``Comparison of Cost-Effectiveness of Risk Reduction Among Different Energy Systems``: cost-effectiveness of robotics and remote tooling for occupational risk reduction at a nuclear fuel fabrication facility; cost-effectiveness of protection actions to reduce occupational exposure in underground uranium mines; cost effectiveness of safety measures to reduce public risk associated with the transportation of UF{sub 6} by truck and trains. Figs and tabs.

Cost reduction and safety design features of ABWR-II. Annex 5

International Nuclear Information System (INIS)

Koh, F.; Moriya, K.; Anegawa, T.

2002-01-01

The ABWR-II, which is aimed to be the next generation reactor following the latest BWR: Advanced Boiling Reactor (ABWR), is now under development jointly by the Japanese BWR utilities, General Electric Company, Hitachi Limited, and Toshiba Corporation. The key objectives of ABWR-II development include improvement in economics and further sophistication in safety for commercialization in the late 2010's and after. This paper summarizes the current status of ABWR-II development focusing on economics and safety. Plant power rating, fuel size, CRD rationalization and outage period are discussed from a cost reduction perspective. In terms of safety, the features such as diversification in emergency power sources and passive system application against severe accidents are being introduced. (author)

Achieving 80% greenhouse gas reduction target in Saudi Arabia under low and medium oil prices

International Nuclear Information System (INIS)

Alshammari, Yousef M.; Sarathy, S. Mani

2017-01-01

COP 21 led to a global agreement to limit the earth's rising temperature to less than 2 °C. This will require countries to act upon climate change and achieve a significant reduction in their greenhouse gas emissions which will play a pivotal role in shaping future energy systems. Saudi Arabia is the World's largest exporter of crude oil, and the 11th largest CO_2 emitter. Understanding the Kingdom's role in global greenhouse gas reduction is critical in shaping the future of fossil fuels. Hence, this work presents an optimisation study to understand how Saudi Arabia can meet the CO_2 reduction targets to achieve the 80% reduction in the power generation sector. It is found that the implementation of energy efficiency measures is necessary to enable meeting the 80% target, and it would also lower costs of transition to low carbon energy system while maintaining cleaner use of hydrocarbons with CCS. Setting very deep GHG reduction targets may be economically uncompetitive in consideration of the energy supply requirements. In addition, we determine the breakeven price of crude oil needed to make CCS economically viable. Results show important dimension for pricing CO_2 and the role of CCS compared with alternative sources of energy. - Highlights: • Energy efficiency measures are needed to achieve 80% reduction. • Nuclear appears as an important option to achieve deep cuts in CO_2 by 2050. • Technology improvement can enable using heavy fuel oil with CCS until 2050. • IGCC requires lower net CO_2 footprint in order to be competitive. • Nuclear power causes a sharp increase in the CO_2 avoidance costs.

Alternatives for operational cost reduction in oil pipelines; Alternativas para reducao de custos energeticos operacionais em oleodutos

Energy Technology Data Exchange (ETDEWEB)

Krause, Philipe Barroso; Carneiro, Leonardo Motta; Pires, Luis Fernando Goncalves [Pontificia Universidade Catolica do Rio de Janeiro (SIMDUT/DEM/ PUC-Rio), RJ (Brazil). Dept. de Engenharia Mecancia. Nucleo de Simulacao Termo-Hidraulica de Dutos

2012-07-01

This paper intends to give a brief overview of some cost reduction alternatives in oil pipelines, to optimize the pipeline operation. Four different alternatives are presented, based on previous studies made on existing pipelines, to demonstrate the response obtained with these solutions. Pipeline operation, especially on mature ones, tends to have a high operational cost, be by tradition, the aging of the installation, change of operational characteristics - such as nominal flow, product, or even flow direction - for which the pipeline wasn't originally designed. The alternatives showed allow for an increase survival time of the pipeline, without resorting to major changes, such as replacement of pipes or adding pumping stations to the system. The alternative studied varies from no implementation cost to high installation cost or operational cost increase, depending on the system and the alternative chosen. From changing the pump arrays during operation or changing the products viscosity with different blends, that represent virtually no cost to the pipeline operation, to the use of VFDs, with a high installation cost or DRA, which increase the operational cost. (author)

Cost-benefit evaluation in a quality control programme for conventional radiodiagnosis

International Nuclear Information System (INIS)

Gallini, R.; Belletti, S.; Giugni, U.

1985-01-01

A comparison is being made between the cost of the staff and equipment in a quality control programme of conventional radiodiagnosis and the benefit obtained in the reduction of spoilt films and in the reduction of dose to patients and workers. For over two years the programme has followed a protocol verified on about 50 X-ray tubes, 25 radiological devices and four automatic processors. The present research, based on previous data, works on a limited but representative sample of radiological X-ray tubes and accessories. The control procedures are carried out periodically to improve and make constant the efficiency of the radiological devices. An evaluation of the cost of these procedures is made. In the meantime the dose to the patients undergoing radiodiagnostic examinations is evaluated by a transmission chamber. Comparison between the values obtained before and after the control enables the benefits to be evaluated. Rejection of radiographic films is evaluated before and after the control to obtain the cost reduction. During the one year control period, there were no variations in the technical characteristics of the personnel, in the operational procedures or in the work-load. (author)

Optimal scenario balance of reduction in costs and greenhouse gas emissions for municipal solid waste management

Institute of Scientific and Technical Information of China (English)

邓娜; 张强; 陈广武; 齐长青; 崔文谦; 张于峰; 马洪亭

2015-01-01

To reduce carbon intensity, an improved management method balancing the reduction in costs and greenhouse gas (GHG) emissions is required for Tianjin’s waste management system. Firstly, six objective functions, namely, cost minimization, GHG minimization, eco-efficiency minimization, cost maximization, GHG maximization and eco-efficiency maximization, are built and subjected to the same constraints with each objective function corresponding to one scenario. Secondly, GHG emissions and costs are derived from the waste flow of each scenario. Thirdly, the range of GHG emissions and costs of other potential scenarios are obtained and plotted through adjusting waste flow with infinitely possible step sizes according to the correlation among the above six scenarios. And the optimal scenario is determined based on this range. The results suggest the following conclusions. 1) The scenarios located on the border between scenario cost minimization and GHG minimization create an optimum curve, and scenario GHG minimization has the smallest eco-efficiency on the curve;2) Simple pursuit of eco-efficiency minimization using fractional programming may be unreasonable; 3) Balancing GHG emissions from incineration and landfills benefits Tianjin’s waste management system as it reduces GHG emissions and costs.

Cost reductions in nickel-hydrogen battery

Science.gov (United States)

Beauchamp, Richard L.; Sindorf, Jack F.

1987-01-01

Significant progress was made toward the development of a commercially marketable hydrogen nickel oxide battery. The costs projected for this battery are remarkably low when one considers where the learning curve is for commercialization of this system. Further developmental efforts on this project are warranted as the H2/NiO battery is already cost competitive with other battery systems.

A framework for cost-aware process management: cost reporting and cost prediction

NARCIS (Netherlands)

Wynn, M.T.; Low, W.Z.; Hofstede, ter A.H.M.; Nauta, W.E.

2014-01-01

Organisations are constantly seeking efficiency gains for their business processes in terms of time and cost. Management accounting enables detailed cost reporting of business operations for decision making purposes, although significant effort is required to gather accurate operational data.

ENabling Reduction of Low-grade Inflammation in SEniors Pilot Study: Concept, Rationale, and Design.

Science.gov (United States)

Manini, Todd M; Anton, Stephen D; Beavers, Daniel P; Cauley, Jane A; Espeland, Mark A; Fielding, Roger A; Kritchevsky, Stephen B; Leeuwenburgh, Christiaan; Lewis, Kristina H; Liu, Christine; McDermott, Mary M; Miller, Michael E; Tracy, Russell P; Walston, Jeremy D; Radziszewska, Barbara; Lu, Jane; Stowe, Cindy; Wu, Samuel; Newman, Anne B; Ambrosius, Walter T; Pahor, Marco

2017-09-01

To test two interventions to reduce interleukin (IL)-6 levels, an indicator of low-grade chronic inflammation and an independent risk factor for impaired mobility and slow walking speed in older adults. The ENabling Reduction of low-Grade Inflammation in SEniors (ENRGISE) Pilot Study was a multicenter, double-blind, placebo-controlled randomized pilot trial of two interventions to reduce IL-6 levels. Five university-based research centers. Target enrollment was 300 men and women aged 70 and older with an average plasma IL-6 level between 2.5 and 30 pg/mL measured twice at least 1 week apart. Participants had low to moderate physical function, defined as self-reported difficulty walking one-quarter of a mile or climbing a flight of stairs and usual walk speed of less than 1 m/s on a 4-m usual-pace walk. Participants were randomized to losartan, omega-3 fish oil (ω-3), combined losartan and ω-3, or placebo. Randomization was stratified depending on eligibility for each group. A titration schedule was implemented to reach a dose that was safe and effective for IL-6 reduction. Maximal doses were 100 mg/d for losartan and 2.8 g/d for ω-3. IL-6, walking speed over 400 m, physical function (Short Physical Performance Battery), other inflammatory markers, safety, tolerability, frailty domains, and maximal leg strength were measured. Results from the ENRGISE Pilot Study will provide recruitment yields, feasibility, medication tolerance and adherence, and preliminary data to help justify a sample size for a more definitive randomized trial. The ENRGISE Pilot Study will inform a larger subsequent trial that is expected to have important clinical and public health implications for the growing population of older adults with low-grade chronic inflammation and mobility limitations. © 2017, Copyright the Authors Journal compilation © 2017, The American Geriatrics Society.

Reduction of electricity costs in forging shops with use of induction zone heaters; Senkung der Stromkosten in Schmiedebetrieben durch Einsatz von Induktions-Zonenerwaermern

Energy Technology Data Exchange (ETDEWEB)

Schnitzler, V. [Ruhrtaler Gesenkschmiede, Witten (Germany); Thus, A. [ABP Induction Systems GmbH, Dortmund (Germany)

2008-03-15

In response to continually increasing electricity prices, production plants with electrical systems are using intelligent energy management systems (EMS). These reduce the power of, or even switch off, individual systems for a limited time in order to ease electricity use - without influencing production. In the forging shops, induction heaters should be used in such a management concept as the main recipient of electrical power yet this often involves production losses. In contrast, the use of zone heaters offers the opportunity to manage the heating process in the best way possible - even with strongly reduced output - so that there are no parts which have been heated incorrectly which could disturb production. Ruhrtaler Gesenkschmiede has installed two, from mid 2008 three, induction zone heaters. These have a total power of 4,500 kW, the operation of which enables a considerable reduction in the power maximum and, with this, also the electricity costs. (orig.)

Application of Emerging Open-source Embedded Systems for Enabling Low-cost Wireless Mini-observatory Nodes in the Coastal Zone

Science.gov (United States)

Glazer, B. T.

2016-02-01

Here, we describe the development of novel, low-cost, open-source instrumentation to enable wireless data transfer of biogeochemical sensors in the coastal zone. The platform is centered upon the Beaglebone Black single board computer. Process-inquiry in environmental sciences suffers from undersampling; enabling sustained and unattended data collection typically involves expensive instrumentation and infrastructure deployed as cabled observatories with little flexibility in deployment location following initial installation. High cost of commercially-available or custom electronic packages have not only limited the number of sensor node sites that can be targeted by reasonably well-funded academic researchers, but have also entirely prohibited widespread engagement with K-12, public non-profit, and `citizen scientist' STEM audiences. The new platform under development represents a balanced blend of research-grade sensors and low-cost open-source electronics that are easily assembled. Custom, robust, open-source code that remains customizable for specific node configurations can match a specific deployment's measurement needs, depending on the scientific research priorities. We have demonstrated prototype capabilities and versatility through lab testing and field deployments of multiple sensor nodes with multiple sensor inputs, all of which are streaming near-real-time data over wireless RF links to a shore-based base station. On shore, first-pass data processing QA/QC takes place and near-real-time plots are made available on the World Wide Web. Specifically, we have worked closely with an environmental and cultural management and restoration non-profit organization, and middle and high school science classes, engaging their interest in STEM application to local watershed processes. Ultimately, continued successful development of this pilot project can lead to a coastal oceanographic analogue of the popular Weather Underground personal weather station model.

Ordering Cost Reduction in Inventory Model with Defective Items and Backorder Price Discount

Directory of Open Access Journals (Sweden)

Karuppuchamy Annadurai

2014-01-01

Full Text Available In the real market, as unsatisfied demands occur, the longer the length of lead time is, the smaller the proportion of backorder would be. In order to make up for the inconvenience and even the losses of royal and patient customers, the supplier may offer a backorder price discount to secure orders during the shortage period. Also, ordering policies determined by conventional inventory models may be inappropriate for the situation in which an arrival lot contains some defective items. To compensate for the inconvenience of backordering and to secure orders, the supplier may offer a price discount on the stockout item. The purpose of this study is to explore a coordinated inventory model including defective arrivals by allowing the backorder price discount and ordering cost as decision variables. There are two inventory models proposed in this paper, one with normally distributed demand and another with distribution free demand. A computer code using the software Matlab 7.0 is developed to find the optimal solution and present numerical examples to illustrate the models. The results in the numerical examples indicate that the savings of the total cost are realized through ordering cost reduction and backorder price discount.

Reduction in energy consumption and operating cost in a dried corn warehouse using logistics techniques

Directory of Open Access Journals (Sweden)

Korrakot Y. Tippayawong

2013-06-01

Full Text Available Corn is one of the major economic crops in Thailand. Corn postharvest operation involves various practices that consume a large amount of energy. Different energy conservation measures have been implemented but logistics consideration is not normally employed. In this work, attempt has been made to demonstrate that logistics techniques can offer a significant reduction in energy and cost. The main objective of this work is to identify and demonstrate possible approaches to improving energy efficiency and reducing operating cost for a dried corn warehouse operator. Three main problems are identified: (i relatively high fuel consumption for internal transfer process, (ii low quality of dried corn, and (iii excess expenditure on outbound transportation. Solutions are proposed and implemented using logistics operations. Improvement is achieved using plant layout and shortest path techniques, resulting in a reduction of almost 50% in energy consumption for the internal transfer process. Installation of an air distributor in the grain storage unit results in a decrease in loss due to poor-quality dried corn from 17% to 10%. Excess expenditure on dried corn distribution is reduced by 6% with application of a global positioning system.

ISS Operations Cost Reductions Through Automation of Real-Time Planning Tasks

Science.gov (United States)

Hall, Timothy A.

2011-01-01

In 2008 the Johnson Space Center s Mission Operations Directorate (MOD) management team challenged their organization to find ways to reduce the costs of International Space station (ISS) console operations in the Mission Control Center (MCC). Each MOD organization was asked to identify projects that would help them attain a goal of a 30% reduction in operating costs by 2012. The MOD Operations and Planning organization responded to this challenge by launching several software automation projects that would allow them to greatly improve ISS console operations and reduce staffing and operating costs. These projects to date have allowed the MOD Operations organization to remove one full time (7 x 24 x 365) ISS console position in 2010; with the plan of eliminating two full time ISS console support positions by 2012. This will account for an overall 10 EP reduction in staffing for the Operations and Planning organization. These automation projects focused on utilizing software to automate many administrative and often repetitive tasks involved with processing ISS planning and daily operations information. This information was exchanged between the ground flight control teams in Houston and around the globe, as well as with the ISS astronaut crew. These tasks ranged from managing mission plan changes from around the globe, to uploading and downloading information to and from the ISS crew, to even more complex tasks that required multiple decision points to process the data, track approvals and deliver it to the correct recipient across network and security boundaries. The software solutions leveraged several different technologies including customized web applications and implementation of industry standard web services architecture between several planning tools; as well as a engaging a previously research level technology (TRL 2-3) developed by Ames Research Center (ARC) that utilized an intelligent agent based system to manage and automate file traffic flow

Opportunities for cost reduction and improved environmental impact in the lead and lead/acid battery industries

Science.gov (United States)

Lewis, N.

The opportunities for cost reduction through improved environmental performance exist in many companies, but often are not realized. This paper describes the efforts of a typical firm — Calder Industrial Materials (CIM) — that is experiencing ever-tighter environmental controls and profit erosion through the effects of new environmental legislation. At the same time, however, CIM sees opportunities to reduce its environmental burden and cut costs. As the story unfolds, readers may well discover many parallels with their own companies. It may even spur some into action, for remember, every £1000 saved requires ten times the turnover to generate the same profit.

Reduction of the radioactive waste volume from Belgian NPP: Reality, costs and goals

International Nuclear Information System (INIS)

Havard, P.; Lemmens, A.; Mannaerts, K.

2001-01-01

The growing awareness of the existence of waste generated by human activities and its environmental impact is one of the critical events of the late twentieth century. All industrial activities produce waste and nuclear industry is no exception. But nuclear power plants produce smaller amount of waste that makes it possible to treat it with particular care. This paper describes the reduction in the amount of waste, the consequences this has had on the associated costs and the action taken to control the development of both objectives. (author)

Cost reduction potentials of offshore wind power in Germany; Kostensenkungspotenziale der Offshore-Windenergie in Deutschland

Energy Technology Data Exchange (ETDEWEB)

Hobohm, Jens; Krampe, Leonard; Peter, Frank [Prognos AG, Berlin (Germany). Bereich Energiewirtschaft

2014-01-15

Offshore wind power is a major hope for the German energy turnaround. However, it will only be possible to tap its cost reduction potentials if industry, the political leadership and the administrative authorities join forces to create the necessary preconditions. An important requirement for this capital-intensive technology are stable legal and political framework conditions. A recent study on the future shows what needs to be done.

Low-Cost Radon Reduction Pilot Study

Energy Technology Data Exchange (ETDEWEB)

Rose, William B. [Partnership for Advanced Residential Retrofit, Champaign, IL (United States); Francisco, Paul W. [Partnership for Advanced Residential Retrofit, Champaign, IL (United States); Merrin, Zachary [Partnership for Advanced Residential Retrofit, Champaign, IL (United States)

2015-09-01

The aim of the research was to conduct a primary scoping study on the impact of air sealing between the foundation and the living space on radon transport reduction across the foundation-living space floor assembly. Fifteen homes in the Champaign, Illinois area participated in the study. These homes were instrumented for hourly continuous radon measurements and simultaneous temperature and humidity the foundation was improved. However, this improved isolation did not lead to significant reductions in radon concentration in the living space. Other factors such as outdoor temperature were shown to have an impact on radon concentration.

Low-Cost Superconducting Wire for Wind Generators: High Performance, Low Cost Superconducting Wires and Coils for High Power Wind Generators

Energy Technology Data Exchange (ETDEWEB)

None

2012-01-01

REACT Project: The University of Houston will develop a low-cost, high-current superconducting wire that could be used in high-power wind generators. Superconducting wire currently transports 600 times more electric current than a similarly sized copper wire, but is significantly more expensive. The University of Houston’s innovation is based on engineering nanoscale defects in the superconducting film. This could quadruple the current relative to today’s superconducting wires, supporting the same amount of current using 25% of the material. This would make wind generators lighter, more powerful and more efficient. The design could result in a several-fold reduction in wire costs and enable their commercial viability of high-power wind generators for use in offshore applications.

Cost of photovoltaic energy systems as determined by balance-of-system costs

Science.gov (United States)

Rosenblum, L.

1978-01-01

The effect of the balance-of-system (BOS), i.e., the total system less the modules, on photo-voltaic energy system costs is discussed for multikilowatt, flat-plate systems. Present BOS costs are in the range of 10 to 16 dollars per peak watt (1978 dollars). BOS costs represent approximately 50% of total system cost. The possibility of future BOS cost reduction is examined. It is concluded that, given the nature of BOS costs and the lack of comprehensive national effort focussed on cost reduction, it is unlikely that BOS costs will decline greatly in the next several years. This prognosis is contrasted with the expectations of the Department of Energy National Photovoltaic Program goals and pending legislation in the Congress which require a BOS cost reduction of an order of magnitude or more by the mid-1980s.

Feasibility of fractionating Myoview cold kits for cost reduction

International Nuclear Information System (INIS)

Penglis, S.; Tsopelas, C.

1999-01-01

Full text: Myoview is a freeze-dried ethylene diphosphine ligand that upon reconstitution with 99 Tc m -pertechnetate yields a preparation containing the lipophilic cationic myocardial imaging agent 99 Tc m -tetrofosmin (Tf). The aim of this study was to determine the feasibility of fractionating Myoview kits to reduce the cost of the kit, currently A$350 per vial. Myoview vials were reconstituted with N 2 -flushed saline and split into 4 or 5 aliquots of 0.5 ml, then stored at -80 deg C in N 2 -filled vials for up to 3 months. 99 Tc m -Tf was prepared by the addition of varying volumes of 99 Tc m -pertechnetate (1.1 GBq.ml- 1 ) to give a final ligand concentration of 14.4 μg.ml- 1 , followed by a 15 min incubation at room temperature. Radiochemical purity (RCP) was examined at 0, 1, 2 and 3 months post-fractionation. At each time point, RCP was determined at 0,1, 2, 4, 6 and 24 h post-reconstitution. RCP was measured using the thin layer chromatography method according to the manufacturer's instructions. Over the 3 month evaluation period, RCP was maintained at 96.4 ± 1.7% (n = 48) over 24 h at room temperature. Animal biodistribution studies were used to validate the final product from the full cold kit to that from the fractionated kits. In conclusion, these results show that Myoview kits can be successfully fractionated and stored for up to 3 months. The subsequent 99 Tc m -Tf can be used to provide significant cost reductions, especially when only 1 patient dose is required

Development of an innovative PWR for low cost fuel recycle and waste reduction

International Nuclear Information System (INIS)

Kanagawa, Takashi; Onoue, Masaaki

2001-01-01

In order to bear long-term and stable energy supply, it is important for nuclear power generation to realize establishment of energy security controlling dependence on natural resources and reduction of long-life radioactive wastes such as minor actinide elements (MA) and so on. For this, establishment of fast breeder reproducible on its fuel and of fuel recycling is essential and construction of the fuel recycling capable of repeatedly recycling of plutonium (Pu) and MA with low cost is required. Here were proposed a fuel recycling system combining recycling type PWR with advanced recycling system under development for Na cooling fast breeder reactor as a candidate filling such conditions, to show its characteristics and effects after its introduction. By this system, some facilities to realize flexible and low cost fuel recycling, to reduce longer-life radioactive wastes due to recycling burning of Pu and MA, and to realize an electric power supplying system independent on natural resources due to fuel breeding feature, were shown. (G.K.)

Implications of the international reduction pledges on long-term energy system changes and costs in China and India

International Nuclear Information System (INIS)

Lucas, Paul L.; Shukla, P.R.; Chen, Wenying; Ruijven, Bas J. van; Dhar, Subash; Elzen, Michel G.J. den; Vuuren, Detlef P. van

2013-01-01

This paper analyses the impact of postponing global mitigation action on abatement costs and energy systems changes in China and India. It compares energy-system changes and mitigation costs from a global and two national energy-system models under two global emission pathways with medium likelihood of meeting the 2 °C target: a least-cost pathway and a pathway that postpones ambitious mitigation action, starting from the Copenhagen Accord pledges. Both pathways have similar 2010–2050 cumulative greenhouse gas emissions. The analysis shows that postponing mitigation action increases the lock-in in less energy efficient technologies and results in much higher cumulative mitigation costs. The models agree that carbon capture and storage (CCS) and nuclear energy are important mitigation technologies, while the shares of biofuels and other renewables vary largely over the models. Differences between India and China with respect to the timing of emission reductions and the choice of mitigation measures relate to differences in projections of rapid economic change, capital stock turnover and technological development. Furthermore, depending on the way it is implemented, climate policy could increase indoor air pollution, but it is likely to provide synergies for energy security. These relations should be taken into account when designing national climate policies. - highlights: • We analyze long-term impacts of the international pledges for China and India. • We compare a least-cost pathway with a pathway starting from the Copenhagen pledges. • Postponing mitigation action implies much higher cumulative mitigation costs. • Postponing increases fossil fuel dependence and requires deeper long-term reductions. • Countries differ mainly due to different periods of rapid economic change

Software-Enabled Project Management Techniques and Their Relationship to the Triple Constraints

Science.gov (United States)

Elleh, Festus U.

2013-01-01

This study investigated the relationship between software-enabled project management techniques and the triple constraints (time, cost, and scope). There was the dearth of academic literature that focused on the relationship between software-enabled project management techniques and the triple constraints (time, cost, and scope). Based on the gap…

Transport Studies Enabling Efficiency Optimization of Cost-Competitive Fuel Cell Stacks (aka AURORA: Areal Use and Reactant Optimization at Rated Amperage)

Energy Technology Data Exchange (ETDEWEB)

Conti, Amedeo [Nuvera Fuel Cells, Inc., Billerica, MA (United States); Dross, Robert [Nuvera Fuel Cells, Inc., Billerica, MA (United States)

2013-12-06

Hydrogen fuel cells are recognized as one of the most viable solutions for mobility in the 21st century; however, there are technical challenges that must be addressed before the technology can become available for mass production. One of the most demanding aspects is the costs of present-day fuel cells which are prohibitively high for the majority of envisioned markets. The fuel cell community recognizes two major drivers to an effective cost reduction: (1) decreasing the noble metals content, and (2) increasing the power density in order to reduce the number of cells needed to achieve a specified power level. To date, the majority of development work aimed at increasing the value metric (i.e. W/mg-Pt) has focused on the reduction of precious metal loadings, and this important work continues. Efforts to increase power density have been limited by two main factors: (1) performance limitations associated with mass transport barriers, and (2) the historical prioritization of efficiency over cost. This program is driven by commercialization imperatives, and challenges both of these factors. The premise of this Program, supported by proprietary cost modeling by Nuvera, is that DOE 2015 cost targets can be met by simultaneously exceeding DOE 2015 targets for Platinum loadings (using materials with less than 0.2 mg-Pt/cm²) and MEA power density (operating at higher than 1.0 Watt/cm²). The approach of this program is to combine Nuvera’s stack technology, which has demonstrated the ability to operate stably at high current densities (> 1.5 A/cm²), with low Platinum loading MEAs developed by Johnson Matthey in order to maximize Pt specific power density and reduce stack cost. A predictive performance model developed by PSU/UTK is central to the program allowing the team to study the physics and optimize materials/conditions specific to low Pt loading electrodes and ultra-high current density and operation.

Flavins secreted by roots of iron-deficient Beta vulgaris enable mining of ferric oxide via reductive mechanisms.

Science.gov (United States)

Sisó-Terraza, Patricia; Rios, Juan J; Abadía, Javier; Abadía, Anunciación; Álvarez-Fernández, Ana

2016-01-01

Iron (Fe) is abundant in soils but generally poorly soluble. Plants, with the exception of Graminaceae, take up Fe using an Fe(III)-chelate reductase coupled to an Fe(II) transporter. Whether or not nongraminaceous species can convert scarcely soluble Fe(III) forms into soluble Fe forms has deserved little attention so far. We have used Beta vulgaris, one among the many species whose roots secrete flavins upon Fe deficiency, to study whether or not flavins are involved in Fe acquisition. Flavins secreted by Fe-deficient plants were removed from the nutrient solution, and plants were compared with Fe-sufficient plants and Fe-deficient plants without flavin removal. Solubilization of a scarcely soluble Fe(III)-oxide was assessed in the presence or absence of flavins, NADH (nicotinamide adenine dinucleotide, reduced form) or plant roots, and an Fe(II) trapping agent. The removal of flavins from the nutrient solution aggravated the Fe deficiency-induced leaf chlorosis. Flavins were able to dissolve an Fe(III)-oxide in the presence of NADH. The addition of extracellular flavins enabled roots of Fe-deficient plants to reductively dissolve an Fe(III)-oxide. We concluded that root-secretion of flavins improves Fe nutrition in B. vulgaris. Flavins allow B. vulgaris roots to mine Fe from Fe(III)-oxides via reductive mechanisms. © 2015 CSIC New Phytologist © 2015 New Phytologist Trust.

U-AVLIS feed conversion using continuous metallothermic reduction of UF4: System description and cost estimate

International Nuclear Information System (INIS)

1994-04-01

The purpose of this document is to present a system description and develop baseline capital and operating cost estimates for commercial facilities which produced U-Fe feedstock for AVLIS enrichment plants using the continuous fluoride reduction (CFR) process. These costs can then be used together with appropriate economic assumptions to calculate estimated unit costs to the AVLIS plant owner (or utility customer) for such conversion services. Six cases are being examined. All cases assume that the conversion services are performed by a private company at a commercial site which has an existing NRC license to possess source material and which has existing uranium processing operations. The cases differ in terms of annual production capacity and whether the new process system is installed in a new building or in an existing building on the site. The six cases are summarized here

Economic assessment of greenhouse gas reduction through low-grade waste heat recovery using organic Rankine cycle (ORC)

Energy Technology Data Exchange (ETDEWEB)

Imran, Muhammad; Park, Byung Sik; Kim, Hyouck Ju; Usman, Muhammad [University of Science and Technology, Daejeon (Korea, Republic of); Lee, Dong Hyun [Korea Institute of Energy Research, Daejeon (Korea, Republic of)

2015-02-15

Low-grade waste heat recovery technologies reduce the environmental impact of fossil fuels and improve overall efficiency. This paper presents the economic assessment of greenhouse gas (GHG) reduction through waste heat recovery using organic Rankine cycle (ORC). The ORC engine is one of the mature low temperature heat engines. The low boiling temperature of organic working fluid enables ORC to recover low-temperature waste heat. The recovered waste heat is utilized to produce electricity and hot water. The GHG emissions for equivalent power and hot water from three fossil fuels-coal, natural gas, and diesel oil-are estimated using the fuel analysis approach and corresponding emission factors. The relative decrease in GHG emission is calculated using fossil fuels as the base case. The total cost of the ORC system is used to analyze the GHG reduction cost for each of the considered fossil fuels. A sensitivity analysis is also conducted to investigate the effect of the key parameter of the ORC system on the cost of GHG reduction. Throughout the 20-year life cycle of the ORC plant, the GHG reduction cost for R245fa is 0.02 $/kg to 0.04 $/kg and that for pentane is 0.04 $/kg to 0.05 $/kg. The working fluid, evaporation pressure, and pinch point temperature difference considerably affect the GHG emission.

DEMONSTRATION OF AN ADVANCED INTEGRATED CONTROL SYSTEM FOR SIMULTANEOUS EMISSIONS REDUCTION

Energy Technology Data Exchange (ETDEWEB)

Suzanne Shea; Randhir Sehgal; Ilga Celmins; Andrew Maxson

2002-02-01

The primary objective of the project titled ''Demonstration of an Advanced Integrated Control System for Simultaneous Emissions Reduction'' was to demonstrate at proof-of-concept scale the use of an online software package, the ''Plant Environmental and Cost Optimization System'' (PECOS), to optimize the operation of coal-fired power plants by economically controlling all emissions simultaneously. It combines physical models, neural networks, and fuzzy logic control to provide both optimal least-cost boiler setpoints to the boiler operators in the control room, as well as optimal coal blending recommendations designed to reduce fuel costs and fuel-related derates. The goal of the project was to demonstrate that use of PECOS would enable coal-fired power plants to make more economic use of U.S. coals while reducing emissions.

Reduction of capital costs of nuclear power plants

International Nuclear Information System (INIS)

2000-01-01

The competitiveness of nuclear power plants depends largely on their capital costs represent some 60 per cent of their total generation costs. Reviewing and analysing ways and means to reduce capital costs of nuclear power plants are essential to enhance the economic viability of the nuclear option. The report is based upon cost information and data provided by experts from NEA Member countries. It investigates the efficiency of alternative methods for reducing capital costs of nuclear units. It will provide stakeholders from the industry and governmental agencies with relevant elements in support of policy making. (author)

Speckle reduction methods in laser-based picture projectors

Science.gov (United States)

Akram, M. Nadeem; Chen, Xuyuan

2016-02-01

Laser sources have been promised for many years to be better light sources as compared to traditional lamps or light-emitting diodes (LEDs) for projectors, which enable projectors having wide colour gamut for vivid image, super brightness and high contrast for the best picture quality, long lifetime for maintain free operation, mercury free, and low power consumption for green environment. A major technology obstacle in using lasers for projection has been the speckle noise caused by to the coherent nature of the lasers. For speckle reduction, current state of the art solutions apply moving parts with large physical space demand. Solutions beyond the state of the art need to be developed such as integrated optical components, hybrid MOEMS devices, and active phase modulators for compact speckle reduction. In this article, major methods reported in the literature for the speckle reduction in laser projectors are presented and explained. With the advancement in semiconductor lasers with largely reduced cost for the red, green and the blue primary colours, and the developed methods for their speckle reduction, it is hoped that the lasers will be widely utilized in different projector applications in the near future.

The BOS-X approach: achieving drastic cost reduction in CPV through holistic power plant level innovation

Science.gov (United States)

Plesniak, A.; Garboushian, V.

2012-10-01

In 2011, the Amonix Advanced Technology Group was awarded DOE SunShot funding in the amount of 4.5M to design a new Balance of System (BOS) architecture utilizing Amonix MegaModules™ focused on reaching the SunShot goal of 0.06-$0.08/kWhr LCOE. The project proposal presented a comprehensive re-evaluation of the cost components of a utility scale CPV plant and identified critical areas of focus where innovation is needed to achieve cost reduction. As the world's premier manufacturer and most experienced installer of CPV power plants, Amonix is uniquely qualified to lead a rethinking of BOS architecture for CPV. The presentation will focus on the structure of the BOS-X approach, which looks for the next wave of cost reduction in CPV through evaluation of non-module subsystems and the interaction between subsystems during the lifecycle of a solar power plant. Innovation around nonmodule components is minimal to date because CPV companies are just now getting enough practice through completion of large projects to create ideas and tests on how to improve baseline designs and processes. As CPV companies increase their installed capacity, they can utilize an approach similar to the methodology of BOS-X to increase the competitiveness of their product. Through partnership with DOE, this holistic approach is expected to define a path for CPV well aligned with the goals of the SunShot Initiative.

The importance of marginal cost electricity pricing to the success of greenhouse gas reduction programs

International Nuclear Information System (INIS)

Friedman, Lee S.

2011-01-01

The efficient reduction of GHG emissions requires appropriate retail pricing of off-peak electricity. However, off-peak electricity for residential consumers is priced at 331% above its marginal cost in the United States as a whole (June 2009). Even for the 1% of residences that are on some form of time-of-use (TOU) rate schedule, the off-peak rate is almost three times higher than the marginal cost. A barrier to marginal-cost based TOU rates is that less than 9% of U.S. households have the 'smart' meters in place that can measure and record the time of consumption. Policies should be put in place to achieve full deployment. Another important barrier is consumer concern about TOU rate design. Two TOU rate designs (baseline and two-part tariff) are described that utilize marginal-cost based rates, ensure appropriate cost recovery, and minimize bill changes from current rate structures. A final barrier is to get residences on to these rates. Should a marginal-cost based TOU rate design remain an alternative for which residences could 'opt-in,' or become the default choice, or become mandatory? Time-invariant rates are a historical anachronism that subsidize very costly peak-period consumption and penalize off-peak usage to our environmental detriment. They should be phased out. - Highlights: → Off-peak electricity for residences is priced at 331% above marginal cost in the US. → This inefficiently deters vehicle electrification that could reduce GHG emissions. → 9% of U.S. households have the 'smart' meters necessary for time-of-use rates. → Time-invariant rates cause substantial environmental harm and should be phased out.

CO2 substitution potential and CO2 reduction costs of an energetic exploitation of solid biomasses in Germany

International Nuclear Information System (INIS)

Becher, S.

1995-01-01

For the reduction of the anthropogenic greenhouse effect, the CO 2 , emissions are clearly to be reduced in future, according to the resolution made by the Federal Republic. Against the background of this objective, possible contributions of the biogenous solid fuels for the reduction of the CO 2 release of fossil origin are presented and discussed. For that, first the existing potentials of biomass in Germany and their present use are shown. Based on this, the CO 2 emissions by the present use already avoided, as well as the existing unexploited potentials of the CO 2 reduction potentials still to be exploited are determined. In accordance with an 'integral' starting point, thereby all pre- and post-positioned processes are considered. Finally, the specific CO 2 reduction costs are analysed and compared with other options. (orig.) [de

Summary Report of Advanced Hydropower Innovations and Cost Reduction Workshop at Arlington, VA, November 5 & 6, 2015

Energy Technology Data Exchange (ETDEWEB)

O' Connor, Patrick [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Rugani, Kelsey [Kearns & West, Inc., San Francisco, CA (United States); West, Anna [Kearns & West, Inc., San Francisco, CA (United States)

2016-03-01

On behalf of the U.S. Department of Energy (DOE) Wind and Water Power Technology Office (WWPTO), Oak Ridge National Laboratory (ORNL), hosted a day and half long workshop on November 5 and 6, 2015 in the Washington, D.C. metro area to discuss cost reduction opportunities in the development of hydropower projects. The workshop had a further targeted focus on the costs of small, low-head1 facilities at both non-powered dams (NPDs) and along undeveloped stream reaches (also known as New Stream-Reach Development or “NSD”). Workshop participants included a cross-section of seasoned experts, including project owners and developers, engineering and construction experts, conventional and next-generation equipment manufacturers, and others to identify the most promising ways to reduce costs and achieve improvements for hydropower projects.

Cost-Reduction Roadmap for Residential Solar Photovoltaics (PV),

Science.gov (United States)

Office (SETO) residential 2030 photovoltaics (PV) cost target of $0.05 per kilowatt-hour by identifying could influence system costs in key market segments. This report examines two key market segments that demonstrate significant opportunities for cost savings and market growth: installing PV at the time of roof

COST MEASUREMENT AND COST MANAGEMENT IN TARGET COSTING

Directory of Open Access Journals (Sweden)

Moisello Anna Maria

2012-07-01

total cost of ownership (TCO. Moreover the activity based analyses reveals the opportunities for rationalizing the supply related activities and containing costs and it enables the effective involvement of the supplier in the process of target costing when he provides activity based information on the costs sustained to produce the product/service: the purchaser can evaluate the impact, in terms of cost, of the activities requested of the supplier and, as a result, he has the chance to rationalize these activities by reducing their number or intensity and enables the effective involvement of the supplier in the process of target costing. The paper gives a contribution in the advancement of costing methodologies applicable to the target costing, proposing the use of a flexible model that supports the decision process according to different time horizons so that effectively supports target costing. The model is suitable for production characterized by high complexity in terms of number and intensity of activities

The economics of gasoline subsidy cost reduction policy: Case study of Indonesia

Science.gov (United States)

Akimaya, Muhammad I.

only provides a subsidy for regular gasoline and in turn proposes an alternative policy that introduces a subsidy for premium gasoline at a lower rate to reduce the overall gasoline subsidy cost. There has yet to be any research that simulates price controls for gasoline with different grades. Simulations based on the calibrated demand are performed and the results confirm the existence of potential savings that are largely determined by the cross-price elasticities between regular and premium gasoline. The benchmark scenario, based on a recent study of substitutability between gasoline by grades, results in an 11.5% reduction in subsidy cost of around 950 million USD with a subsidy rate of Rp 2,254/liter. Furthermore, the optimal rate of subsidy for premium gasoline results in a reduction of inefficiency as consumers' welfare increase by 6.8 trillion rupiahs (or 560 million USD).

The Impact of Green Supply Chain Management on Transportation Cost Reduction in Turkey

Directory of Open Access Journals (Sweden)

Mehmet SARIDOGAN

2012-01-01

Full Text Available Supply chain management (SCM has become an important competitive approach for organizations. The issue of green supply chain management is critical for the successful implementation of industrial ecosystems and industrial ecology. Organizations have a number of reasons for implementing these green supply chain policies, from reactive regulatory reasons, to proactive strategic and competitive advantage reasons. From an overall environmental and organizational perspective, it is important to understand the situation and what issues exist in this field. Many organizations worldwide have already experienced globalization and a shifting focus to competition among networks of companies in this environment. Multinational enterprises have established global networks of suppliers that take advantage of country-industry specific characteristics to build this competitive advantage. To success having this competitive advantage, logistics and supply chain managers have to balance efforts to reduce costs and innovate while maintaining good environmental (ecological performance (Pagell et al., 2004. Therefore, today, competition is not between companies, between supply chains. This study brings us the effect of Green Supply Chain Management (GSCM on the Transportation Cost Reduction (TCR.

NASA Propulsion Concept Studies and Risk Reduction Activities for Resource Prospector Lander

Science.gov (United States)

Trinh, Huu P.; Williams, Hunter; Burnside, Chris

2015-01-01

The trade study has led to the selection of propulsion concept with the lowest cost and net lowest risk -Government-owned, flight qualified components -Meet mission requirements although the configuration is not optimized. Risk reduction activities have provided an opportunity -Implement design improvements while development with the early-test approach. -Gain knowledge on the operation and identify operation limit -Data to anchor analytical models for future flight designs; The propulsion system cold flow tests series have provided valuable data for future design. -The pressure surge from the system priming and waterhammer within component operation limits. -Enable to optimize the ullage volume to reduce the propellant tank mass; RS-34 hot fire tests have successfully demonstrated of using the engines for the RP mission -No degradation of performance due to extended storage life of the hardware. -Enable to operate the engine for RP flight mission scenarios, outside of the qualification regime. -Provide extended data for the thermal and GNC designs. Significant progress has been made on NASA propulsion concept design and risk reductions for Resource Prospector lander.

Strategies for cost-effective carbon reductions: A sensitivity analysis of alternative scenarios

International Nuclear Information System (INIS)

Gumerman, Etan; Koomey, Jonathan G.; Brown, Marilyn

2001-01-01

Analyses of alternative futures often present results for a limited set of scenarios, with little if any sensitivity analysis to identify the factors affecting the scenario results. This approach creates an artificial impression of certainty associated with the scenarios considered, and inhibits understanding of the underlying forces. This paper summarizes the economic and carbon savings sensitivity analysis completed for the Scenarios for a Clean Energy Future study (IWG, 2000). Its 19 sensitivity cases provide insight into the costs and carbon-reduction impacts of a carbon permit trading system, demand-side efficiency programs, and supply-side policies. Impacts under different natural gas and oil price trajectories are also examined. The results provide compelling evidence that policy opportunities exist to reduce carbon emissions and save society money

Using the Time-Driven Activity-Based Costing Model in the Eye Clinic at The Hospital for Sick Children: A Case Study and Lessons Learned.

Science.gov (United States)

Gulati, Sanchita; During, David; Mainland, Jeff; Wong, Agnes M F

2018-01-01

One of the key challenges to healthcare organizations is the development of relevant and accurate cost information. In this paper, we used time-driven activity-based costing (TDABC) method to calculate the costs of treating individual patients with specific medical conditions over their full cycle of care. We discussed how TDABC provides a critical, systematic and data-driven approach to estimate costs accurately and dynamically, as well as its potential to enable structural and rational cost reduction to bring about a sustainable healthcare system. © 2018 Longwoods Publishing.

Determination production costs using PBC method

Directory of Open Access Journals (Sweden)

Todić Vladimir V.

2014-01-01

Full Text Available Basic characteristics of modern markets make requirements in quality increasing, decreasing prices and shortening delivery of products. In the middle of this requirements are production costs for whose determination are developed many traditional and alternative methods including PBC method (Process Based Costing. This method enables precisely locating and calculating indirect production costs, and with determined direct costs enables determination of total production costs. This paper shows usage of PBC method for determination production costs for three forms of processing cutting tools.

Effectiveness, cost effectiveness, acceptability and implementation barriers/enablers of chronic kidney disease management programs for Indigenous people in Australia, New Zealand and Canada: a systematic review of mixed evidence.

Science.gov (United States)

Reilly, Rachel; Evans, Katharine; Gomersall, Judith; Gorham, Gillian; Peters, Micah D J; Warren, Steven; O'Shea, Rebekah; Cass, Alan; Brown, Alex

2016-04-06

Indigenous peoples in Australia, New Zealand and Canada carry a greater burden of chronic kidney disease (CKD) than the general populations in each country, and this burden is predicted to increase. Given the human and economic cost of dialysis, understanding how to better manage CKD at earlier stages of disease progression is an important priority for practitioners and policy-makers. A systematic review of mixed evidence was undertaken to examine the evidence relating to the effectivness, cost-effectiveness and acceptability of chronic kidney disease management programs designed for Indigenous people, as well as barriers and enablers of implementation of such programs. Published and unpublished studies reporting quantitative and qualitative data on health sector-led management programs and models of care explicitly designed to manage, slow progression or otherwise improve the lives of Indigenous people with CKD published between 2000 and 2014 were considered for inclusion. Data on clinical effectiveness, ability to self-manage, quality of life, acceptability, cost and cost-benefit, barriers and enablers of implementation were of interest. Quantitative data was summarized in narrative and tabular form and qualitative data was synthesized using the Joanna Briggs Institute meta-aggregation approach. Ten studies were included. Six studies provided evidence of clinical effectiveness of CKD programs designed for Indigenous people, two provided evidence of cost and cost-effectiveness of a CKD program, and two provided qualitative evidence of barriers and enablers of implementation of effective and/or acceptable CKD management programs. Common features of effective and acceptable programs were integration within existing services, nurse-led care, intensive follow-up, provision of culturally-appropriate education, governance structures supporting community ownership, robust clinical systems supporting communication and a central role for Indigenous Health Workers. Given

Fairness and cost-effectiveness of CO2 emission reduction targets in the European Union member states. An analysis based on scenario studies

International Nuclear Information System (INIS)

Kram, T.; Ybema, J.R.; Vos, D.

1997-06-01

The Member States of the European Union (EU) have agreed upon a common position in the international negotiations on the limitation of greenhouse gas emissions. The total commitment of the EU is the result of differentiated emission targets for the individual Member States. In this study the results of 4 recent scenario studies on CO2 emission reduction are used to assess the fairness and the cost-effectiveness of the differentiated targets. Here, fairness is measured by the average cost per capita in a country to reach the emission target. Cost-effectiveness is based on the marginal cost of emission reduction. It is noted that there are limitations in the comparability of the country results. Further, the coverage of the EU Member States is not complete in all 4 studies. Robust conclusions could thus not be drawn for all countries. Nonetheless, there are strong indications that the efforts to achieve the emission reduction targets are not evenly distributed. Based on the results the countries can be divided into four groups with different burdens to achieve reduction of CO2 emissions: (a) countries that will probably be faced with above average burdens: Sweden, Italy and the Netherlands; (b) countries that will presumably be faced with above average burdens but for which limited information is available: Austria and Denmark; (c) countries that will probably be faced with average burdens or for which the relative efforts are indistinct: Germany, Portugal, Belgium, Finland and Luxembourg; and (d) countries that will probably be faced with below average burdens: United Kingdom, France, Spain, Ireland and Greece. 1 fig., 12 tabs., 6 refs

Component Commonality and Its Cost Implications - Increasing the Commonality of the Right Components

DEFF Research Database (Denmark)

Lyly-Yrjänäinen, Jouni; Suomala, Petri; Israelsen, Poul

Component commonality (Labro 2004, Zhou & Gruppström 2004) can be defined as the use of the same version of a component across multiple products. It is usually seen as a means to manage costs without sacrificing product variety. However, when managing costs with component commonality, the managers...... constructions was identified as the most important bottleneck for the delivery process causing many indirect costs, especially with respect to project-management-related activities. Interestingly, by eliminating the need for mechanical engineering, the context starts to approach assembly-to-order context, also...... should be able to identify rather rapidly which group of components would enable the most significant cost reductions. Unfortunately, the existing literature lacks profound discussion of how to identify the right components for increased component commonality. The objective of the paper is to discuss how...

Low-cost, highly transparent flexible low-e coating film to enable electrochromic windows with increased energy savings

Energy Technology Data Exchange (ETDEWEB)

Berland, Brian [ITN Energy Systems, Inc., Littleton, CO (United States); Hollingsworth, Russell [ITN Energy Systems, Inc., Littleton, CO (United States)

2015-03-31

Five Quads of energy are lost through windows annually in the U.S. Low-e coatings are increasingly employed to reduce the wasted energy. Most commonly, the low-e coating is an oxide material applied directly to the glass at high temperature. With over 100,000,000 existing homes, a retrofit product is crucial to achieve widespread energy savings. Low-e films, i.e. coatings on polymeric substrates, are now also available to meet this need. However, the traditional oxide materials and process is incompatible with low temperature plastics. Alternate high performing low-e films typically incorporate materials that limit visible transmission to 35% or less. Further, the cost is high. The objective of this award was to develop a retrofit, integrated low-e/electrochromic window film to dramatically reduce energy lost through windows. While field testing of state-of-the-art electrochromic (EC) windows show the energy savings are maximized if a low-e coating is used in conjunction with the EC, available low-e films have a low visible transmission (~70% or less) that limits the achievable clear state and therefore, appearance and energy savings potential. Comprehensive energy savings models were completed at Lawrence Berkeley National Lab (LBNL). A parametric approach was used to project energy usage for windows with a large range of low-e properties across all U.S. climate zones, without limiting the study to materials that had already been produced commercially or made in a lab. The model enables projection of energy savings for low-e films as well as integrated low-e/EC products. This project developed a novel low-e film, optimized for compatibility with EC windows, using low temperature, high deposition rate processes for the growth of low-e coatings on plastic films by microwave plasma enhanced chemical vapor deposition. Silica films with good density and optical properties were demonstrated at deposition rates as high as 130Å/sec. A simple bi-layer low-e stack of

Save water to save carbon and money: developing abatement costs for expanded greenhouse gas reduction portfolios.

Science.gov (United States)

Stokes, Jennifer R; Hendrickson, Thomas P; Horvath, Arpad

2014-12-02

The water-energy nexus is of growing interest for researchers and policy makers because the two critical resources are interdependent. Their provision and consumption contribute to climate change through the release of greenhouse gases (GHGs). This research considers the potential for conserving both energy and water resources by measuring the life-cycle economic efficiency of greenhouse gas reductions through the water loss control technologies of pressure management and leak management. These costs are compared to other GHG abatement technologies: lighting, building insulation, electricity generation, and passenger transportation. Each cost is calculated using a bottom-up approach where regional and temporal variations for three different California water utilities are applied to all alternatives. The costs and abatement potential for each technology are displayed on an environmental abatement cost curve. The results reveal that water loss control can reduce GHGs at lower cost than other technologies and well below California's expected carbon trading price floor. One utility with an energy-intensive water supply could abate 135,000 Mg of GHGs between 2014 and 2035 and save--rather than spend--more than $130/Mg using the water loss control strategies evaluated. Water loss control technologies therefore should be considered in GHG abatement portfolios for utilities and policy makers.

Reduction of costs for anemia-management drugs associated with the use of ferric citrate

Directory of Open Access Journals (Sweden)

Thomas A

2014-05-01

Full Text Available Anila Thomas,1 Leif E Peterson2 1Clinical Pharmacy Services, Houston Methodist Hospital, Houston, TX, USA; 2Center for Biostatistics, Houston Methodist Research Institute, Houston, TX, USA Background: Ferric citrate is a novel phosphate binder which has the potential to reduce usage of erythropoietin-stimulating agents (ESAs and intravenous (IV iron used for anemia management during hemodialysis (HD among patients with end-stage renal disease (ESRD. Currently, the potential health care cost savings on a national scale due to the use of ferric citrate in ESRD are undetermined. Methods: Per-patient-per-year costs of ESAs (Epogen® and Aranesp® [Amgen Inc., CA, USA] and IV iron (Venofer® [American Regent, Inc., NY, USA] and Ferrlecit® [Sanofi US, Bridgewater, NJ, USA] were based on RED BOOK™ (Truven Health Analytics New York, NY, USA costs combined with the Centers for Medicare and Medicaid Services (CMS base rate and actual usage in 2011 for the four drugs. The annual number of outpatients undergoing HD in the US was based on frequencies reported by the USRDS (United States Renal Data System. Monte Carlo uncertainty analysis was performed to determine total annual costs and cost reduction based on ferric citrate usage. Results: Total annual cost of ESAs and IV iron for anemia management in ESRD determined by Monte Carlo analysis assuming CMS base rate value was 5.127 (3.664–6.260 billion USD. For actual utilization in 2011, total annual cost of ESAs and IV iron was 3.981 (2.780–4.930 billion USD. If ferric citrate usage reduced ESA utilization by 20% and IV iron by 40%, then total cost would be reduced by 21.2% to 4.038 (2.868–4.914 billion USD for the CMS base rate, and by 21.8% to 3.111 (2.148–3.845 billion USD, based on 2011 actual utilization. Conclusion: It is likely that US health care costs for anemia-management drugs associated with ESRD among HD patients can be reduced by using ferric citrate as a phosphate binder. Keywords

1366 Project Automate: Enabling Automation for <$0.10/W High-Efficiency Kerfless Wafers Manufactured in the US

Energy Technology Data Exchange (ETDEWEB)

Lorenz, Adam [1366 Technologies, Bedford, MA (United States)

2017-05-10

For photovoltaic (PV) manufacturing to thrive in the U.S., there must be an innovative core to the technology. Project Automate builds on 1366’s proprietary Direct Wafer® kerfless wafer technology and aims to unlock the cost and efficiency advantages of thin kerfless wafers. Direct Wafer is an innovative, U.S.-friendly (efficient, low-labor content) manufacturing process that addresses the main cost barrier limiting silicon PV cost-reductions – the 35-year-old grand challenge of manufacturing quality wafers (40% of the cost of modules) without the cost and waste of sawing. This simple, scalable process will allow 1366 to manufacture “drop-in” replacement wafers for the $10 billion silicon PV wafer market at 50% of the cost, 60% of the capital, and 30% of the electricity of conventional casting and sawing manufacturing processes. This SolarMat project developed the Direct Wafer processes’ unique capability to tailor the shape of wafers to simultaneously make thinner AND stronger wafers (with lower silicon usage) that enable high-efficiency cell architectures. By producing wafers with a unique target geometry including a thick border (which determines handling characteristics) and thin interior regions (which control light capture and electron transport and therefore determine efficiency), 1366 can simultaneously improve quality and lower cost (using less silicon).

Cost Reduction and Business Strategy Matters to Human Resource Outsourcing? A Validation by HR Experts from Government Link Companies (GLC’s.

Directory of Open Access Journals (Sweden)

Mansor Mohd Fitri

2018-01-01

Full Text Available The phenomenon of outsourcing has spawned a rich body scholarly reseach in sveral decades. However, the answer to one of the pertinent question has remained elusive: Does cost reduction and business strategy really matters to the human resource outsourcing impacts. Looking at this question it is important for the organization to embark on the practice of human resource outsourcing to save operating cost and remain competitive. Therefore, the objective of this study is to investigate the effects of cost reduction and business starategy towards human resource outsourcing impacts. Both quantitative and qualitative methods were employed and the top management in Malaysian Government Link Companies (GLC’ is the unit of analysis. The findings revelaved that, both variables are significant statistically and non statically i.e from the experts opinion. Finally, the study also provides useful directions for future research, HR Practitioners and policy maker particularly in managing and organizing human reseouce matters.

Cost reduction for web-based data imputation

KAUST Repository

Li, Zhixu; Shang, Shuo; Xie, Qing; Zhang, Xiangliang

2014-01-01

Web-based Data Imputation enables the completion of incomplete data sets by retrieving absent field values from the Web. In particular, complete fields can be used as keywords in imputation queries for absent fields. However, due to the ambiguity

Lean-Six Sigma: tools for rapid cycle cost reduction.

Science.gov (United States)

Caldwell, Chip

2006-10-01

Organizational costs can be grouped as process cost, cost of quality, and cost of poor quality. Providers should train managers in the theory and application of Lean-Six Sigma, including the seven categories of waste and how to remove them. Healthcare financial executives should work with managers in eliminating waste to improve service and reduce costs.

U-AVLIS feed conversion using continuous metallothermic reduction of UF{sub 4}: System description and cost estimate

Energy Technology Data Exchange (ETDEWEB)

1994-04-01

The purpose of this document is to present a system description and develop baseline capital and operating cost estimates for commercial facilities which produced U-Fe feedstock for AVLIS enrichment plants using the continuous fluoride reduction (CFR) process. These costs can then be used together with appropriate economic assumptions to calculate estimated unit costs to the AVLIS plant owner (or utility customer) for such conversion services. Six cases are being examined. All cases assume that the conversion services are performed by a private company at a commercial site which has an existing NRC license to possess source material and which has existing uranium processing operations. The cases differ in terms of annual production capacity and whether the new process system is installed in a new building or in an existing building on the site. The six cases are summarized here.

Aneurysm coil embolization: cost per volumetric filling analysis and strategy for cost reduction.

Science.gov (United States)

Wang, Charlie; Ching, Esteban Cheng; Hui, Ferdinand K

2016-05-01

One of the primary device expenditures associated with the endovascular treatment of aneurysms is that of detachable coils. Analyzing the cost efficiency of detachable coils is difficult, given the differences in design, implantable volume, and the presence of additives. However, applying a volume per cost metric may provide an index analogous to unit price found in grocery stores. The price information for 509 different coils belonging to 31 different coil lines, available as of September 2013, was obtained through the inventory management system at the study site, and normalized to the price of the least expensive coil. Values were used to calculate the logarithmic ratio of volume over cost. Operator choice among coil sizes can vary the material costs by five-fold in a hypothetical aneurysm. The difference in coil costs as a function of cost per volume of coil can vary tremendously. Using the present pricing algorithms, using the longest available length at a particular helical dimension and system yields improved efficiency. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Cost of elective percutaneous coronary intervention in Malaysia: a multicentre cross-sectional costing study.

Science.gov (United States)

Lee, Kun Yun; Ong, Tiong Kiam; Low, Ee Vien; Liow, Siow Yen; Anchah, Lawrence; Hamzah, Syuhada; Liew, Houng Bang; Ali, Rosli Mohd; Ismail, Omar; Ahmad, Wan Azman Wan; Said, Mas Ayu; Dahlui, Maznah

2017-05-28

Limitations in the quality and access of cost data from low-income and middle-income countries constrain the implementation of economic evaluations. With the increasing prevalence of coronary artery disease in Malaysia, cost information is vital for cardiac service expansion. We aim to calculate the hospitalisation cost of percutaneous coronary intervention (PCI), using a data collection method customised to local setting of limited data availability. This is a cross-sectional costing study from the perspective of healthcare providers, using top-down approach, from January to June 2014. Cost items under each unit of analysis involved in the provision of PCI service were identified, valuated and calculated to produce unit cost estimates. Five public cardiac centres participated. All the centres provide full-fledged cardiology services. They are also the tertiary referral centres of their respective regions. The cost was calculated for elective PCI procedure in each centre. PCI conducted for urgent/emergent indication or for patients with shock and haemodynamic instability were excluded. The outcome measures of interest were the unit costs at the two units of analysis, namely cardiac ward admission and cardiac catheterisation utilisation, which made up the total hospitalisation cost. The average hospitalisation cost ranged between RM11 471 (US$3186) and RM14 465 (US$4018). PCI consumables were the dominant cost item at all centres. The centre with daycare establishment recorded the lowest admission cost and total hospitalisation cost. Comprehensive results from all centres enable comparison at the levels of cost items, unit of analysis and total costs. This generates important information on cost variations between centres, thus providing valuable guidance for service planning. Alternative procurement practices for PCI consumables may deliver cost reduction. For countries with limited data availability, costing method tailored based on country setting can be used for

Cost reduction through improved seismic design

International Nuclear Information System (INIS)

Severud, L.K.

1984-01-01

During the past decade, many significnt seismic technology developments have been accomplished by the United States Department of Energy (USDOE) programs. Both base technology and major projects, such as the Fast Flux Test Facility (FFTF) and the Clinch River Breeder Reactor (CRBR) plant, have contributed to seismic technology development and validation. Improvements have come in the areas of ground motion definitions, soil-structure interaction, and structural analysis methods and criteria for piping, equipment, components, reactor core, and vessels. Examples of some of these lessons learned and technology developments are provided. Then, the highest priority seismic technology needs, achievable through DOE actions and sponsorship are identified and discussed. Satisfaction of these needs are expected to make important contributions toward cost avoidances and reduced capital costs of future liquid metal nuclear plants. 23 references, 12 figures

Six steps to a successful dose-reduction strategy

International Nuclear Information System (INIS)

Bennett, M.

1995-01-01

The increased importance of demonstrating achievement of the ALARA principle has helped produce a proliferation of dose-reduction ideas. Across a company there may be many dose-reduction items being pursued in a variety of areas. However, companies have a limited amount of resource and, therefore, to ensure funding is directed to those items which will produce the most benefit and that all areas apply a common policy, requires the presence of a dose-reduction strategy. Six steps were identified in formulating the dose-reduction strategy for Rolls-Royce and Associates (RRA): (1) collating the ideas; (2) quantitatively evaluating them on a common basis; (3) prioritizing the ideas in terms of cost benefit, (4) implementation of the highest priority items; (5) monitoring their success; (6) periodically reviewing the strategy. Inherent in producing the dose-reduction strategy has been a comprehensive dose database and the RRA-developed dose management computer code DOMAIN, which allows prediction of dose rates and dose. The database enabled high task dose items to be identified, assisted in evaluating dose benefits, and monitored dose trends once items had been implemented. The DOMAIN code was used both in quantifying some of the project dose benefits and its results, such as dose contours, used in some of the dose-reduction items themselves. In all, over fifty dose-reduction items were evaluated in the strategy process and the items which will give greatest benefit are being implemented. The strategy has been successful in giving renewed impetus and direction to dose-reduction management

Six steps to a successful dose-reduction strategy

Energy Technology Data Exchange (ETDEWEB)

Bennett, M. [Rolls-Royce & Associates Ltd., Derby (United Kingdom)

1995-03-01

The increased importance of demonstrating achievement of the ALARA principle has helped produce a proliferation of dose-reduction ideas. Across a company there may be many dose-reduction items being pursued in a variety of areas. However, companies have a limited amount of resource and, therefore, to ensure funding is directed to those items which will produce the most benefit and that all areas apply a common policy, requires the presence of a dose-reduction strategy. Six steps were identified in formulating the dose-reduction strategy for Rolls-Royce and Associates (RRA): (1) collating the ideas; (2) quantitatively evaluating them on a common basis; (3) prioritizing the ideas in terms of cost benefit, (4) implementation of the highest priority items; (5) monitoring their success; (6) periodically reviewing the strategy. Inherent in producing the dose-reduction strategy has been a comprehensive dose database and the RRA-developed dose management computer code DOMAIN, which allows prediction of dose rates and dose. The database enabled high task dose items to be identified, assisted in evaluating dose benefits, and monitored dose trends once items had been implemented. The DOMAIN code was used both in quantifying some of the project dose benefits and its results, such as dose contours, used in some of the dose-reduction items themselves. In all, over fifty dose-reduction items were evaluated in the strategy process and the items which will give greatest benefit are being implemented. The strategy has been successful in giving renewed impetus and direction to dose-reduction management.

Novel Low Cost, High Reliability Wind Turbine Drivetrain

Energy Technology Data Exchange (ETDEWEB)

Chobot, Anthony; Das, Debarshi; Mayer, Tyler; Markey, Zach; Martinson, Tim; Reeve, Hayden; Attridge, Paul; El-Wardany, Tahany

2012-09-13

Clipper Windpower, in collaboration with United Technologies Research Center, the National Renewable Energy Laboratory, and Hamilton Sundstrand Corporation, developed a low-cost, deflection-compliant, reliable, and serviceable chain drive speed increaser. This chain and sprocket drivetrain design offers significant breakthroughs in the areas of cost and serviceability and addresses the key challenges of current geared and direct-drive systems. The use of gearboxes has proven to be challenging; the large torques and bending loads associated with use in large multi-MW wind applications have generally limited demonstrated lifetime to 8-10 years [1]. The large cost of gearbox replacement and the required use of large, expensive cranes can result in gearbox replacement costs on the order of $1M, representing a significant impact to overall cost of energy (COE). Direct-drive machines eliminate the gearbox, thereby targeting increased reliability and reduced life-cycle cost. However, the slow rotational speeds require very large and costly generators, which also typically have an undesirable dependence on expensive rare-earth magnet materials and large structural penalties for precise air gap control. The cost of rare-earth materials has increased 20X in the last 8 years representing a key risk to ever realizing the promised cost of energy reductions from direct-drive generators. A common challenge to both geared and direct drive architectures is a limited ability to manage input shaft deflections. The proposed Clipper drivetrain is deflection-compliant, insulating later drivetrain stages and generators from off-axis loads. The system is modular, allowing for all key parts to be removed and replaced without the use of a high capacity crane. Finally, the technology modularity allows for scalability and many possible drivetrain topologies. These benefits enable reductions in drivetrain capital cost by 10.0%, levelized replacement and O&M costs by 26.7%, and overall cost of

Highly integrated image sensors enable low-cost imaging systems

Science.gov (United States)

Gallagher, Paul K.; Lake, Don; Chalmers, David; Hurwitz, J. E. D.

1997-09-01

The highest barriers to wide scale implementation of vision systems have been cost. This is closely followed by the level of difficulty of putting a complete imaging system together. As anyone who has every been in the position of creating a vision system knows, the various bits and pieces supplied by the many vendors are not under any type of standardization control. In short, unless you are an expert in imaging, electrical interfacing, computers, digital signal processing, and high speed storage techniques, you will likely spend more money trying to do it yourself rather than to buy the exceedingly expensive systems available. Another alternative is making headway into the imaging market however. The growing investment in highly integrated CMOS based imagers is addressing both the cost and the system integration difficulties. This paper discusses the benefits gained from CMOS based imaging, and how these benefits are already being applied.

Thermoecological cost of electricity production in the natural gas pressure reduction process

International Nuclear Information System (INIS)

Kostowski, Wojciech J.; Usón, Sergio; Stanek, Wojciech; Bargiel, Paweł

2014-01-01

The paper presents a novel concept for thermodynamic evaluation of a selected energy system. The presented method has been developed by integration of the Thermo-Economic Analysis with the theory of Thermo-Ecological Cost. It can be applied as a thermodynamic evaluation method of rational resources management within any production system. It takes into account both the interrelation of irreversibility within the analyzed system and its influence on the global effects related to the depletion of non-renewable natural resources. The proposed method has been applied to evaluate the production of electricity in the process of natural gas transmission at pressure reduction stations. The expansion system is based on an existing plant integrated with a CHP module, characterized by a performance ratio of 89.5% and exergy efficiency of 49.2%. Within the paper, this expansion plant is supplied with natural gas transported from a natural deposit through a case-study transmission system with 4 compressor stations. The TEC (thermoecological cost) method was applied in conjunction with thermoeconomic analysis. As a result, TEC of the electricity generated in the expanders was determined at 2.42 kJ/kJ, TEC of electricity from the CHP module is 1.77, and the TEC of medium-pressure natural gas distributed to consumers is 1.022. - Highlights: • The chain of NG transmission with an exergy recovery expansion plant was analyzed. • New methodology coupling the TEC (thermoecological cost) and thermoeconomics. • Decomposition of the TEC formation process. • Case-study transmission system yields TEC of natural gas = 1.0222. • Expansion plant yields TEC of electricity 2.42 (expanders) and 1.77 (CHP module)

Greenhouse gas emission reduction policies in developing countries

International Nuclear Information System (INIS)

Halsnaes, K.

2001-01-01

The chapter begins with an introduction of the main arguments for why global cost-effectiveness in GHG emission reduction policies will suggest that an international collaboration about the policies is established such as initiated by the Kyoto Protocol of the United Nations Framework Convention on Climate Change. A general conceptual overview is given on the cost concepts that are relevant to apply to the evaluation of GHG emission reduction policies, and the methodological framework of GHG emission reduction cost studies for developing countries are introduced. The studies have in particular focussed on GHG emission reduction options in the energy sector, and a number of costing results are reported for this sector. Finally, the chapter considers potential local side-impacts on development, the local environment, and social policy objectives of GHG emission reduction projects seen from the perspective of developing countries. It is concluded that there is a potential for combining global cost-effectiveness principles for GHG emission reduction policies, and local policy objectives of developing countries. (LN)

CO{sub 2} reduction cost for bio-diesel, Danish produced bio-diesel based on rape seed; CO{sub 2} reduktionsomkostninger ved biodiesel. Dansk produceret biodiesel pae raps

Energy Technology Data Exchange (ETDEWEB)

Carlsen, Kirsten; Kjellingbro, M; Mogensen, Martin Frank; Kohl, M

2006-12-15

Bio-diesel based on rape seed (RME, Rape Methyl Esther), often referred to as first generation bio-diesel, is a renewable fuel with CO{sub 2} reduction potential. Mixed with conventional diesel it can be used directly in existing diesel engines. The EU target for the use of bio-fuels in the transport sector was 2 % by 2005 and is 5.75 % by 2010. In Denmark, the use of bio-fuels in the transport sector is not viewed as a cost-effective CO{sub 2} reduction measure. This conclusion concerning the cost-effectiveness of bio-fuels was partly based on calculations of the CO2 reduction cost for Danish-produced RME made by the Danish Energy Authority in 2003. At that time the cost was estimated at 360 DKK/tonne CO{sub 2}. Since then some of the assumptions behind the calculations have changed. The overall objective of this report is to update the Danish Energy Authority's study from 2003, taking into account revised assumptions. The report also attempts to examine the uncertainties associated with the calculations by including extended sensitivity analyses. The report draws the following conclusions: 1) The CO{sub 2} reduction cost for Danish produced RME is estimated at 860 DKK/tonne CO{sub 2}, which is significantly higher than the result obtained by the Danish Energy Authority in 2003. 2) The difference from the Danish Energy Authority's original calculations is principally due to a higher rape seed price based on the market price on rape seed. 3) The uncertainty in both estimates is substantial, and there is about 15 % probability of the reduction costs being lower than the target of 180 DKK/tonne CO2 set by the government. (au)

CO{sub 2} reduction cost for bio-diesel, Danish produced bio-diesel based on rape seed; CO{sub 2} reduktionsomkostninger ved biodiesel. Dansk produceret biodiesel pae raps

Energy Technology Data Exchange (ETDEWEB)

Carlsen, Kirsten; Kjellingbro, M.; Mogensen, Martin Frank; Kohl, M.

2006-12-15

Bio-diesel based on rape seed (RME, Rape Methyl Esther), often referred to as first generation bio-diesel, is a renewable fuel with CO{sub 2} reduction potential. Mixed with conventional diesel it can be used directly in existing diesel engines. The EU target for the use of bio-fuels in the transport sector was 2 % by 2005 and is 5.75 % by 2010. In Denmark, the use of bio-fuels in the transport sector is not viewed as a cost-effective CO{sub 2} reduction measure. This conclusion concerning the cost-effectiveness of bio-fuels was partly based on calculations of the CO2 reduction cost for Danish-produced RME made by the Danish Energy Authority in 2003. At that time the cost was estimated at 360 DKK/tonne CO{sub 2}. Since then some of the assumptions behind the calculations have changed. The overall objective of this report is to update the Danish Energy Authority's study from 2003, taking into account revised assumptions. The report also attempts to examine the uncertainties associated with the calculations by including extended sensitivity analyses. The report draws the following conclusions: 1) The CO{sub 2} reduction cost for Danish produced RME is estimated at 860 DKK/tonne CO{sub 2}, which is significantly higher than the result obtained by the Danish Energy Authority in 2003. 2) The difference from the Danish Energy Authority's original calculations is principally due to a higher rape seed price based on the market price on rape seed. 3) The uncertainty in both estimates is substantial, and there is about 15 % probability of the reduction costs being lower than the target of 180 DKK/tonne CO2 set by the government. (au)

Commercial Motion Sensor Based Low-Cost and Convenient Interactive Treadmill

Directory of Open Access Journals (Sweden)

Jonghyun Kim

2015-09-01

Full Text Available Interactive treadmills were developed to improve the simulation of overground walking when compared to conventional treadmills. However, currently available interactive treadmills are expensive and inconvenient, which limits their use. We propose a low-cost and convenient version of the interactive treadmill that does not require expensive equipment and a complicated setup. As a substitute for high-cost sensors, such as motion capture systems, a low-cost motion sensor was used to recognize the subject’s intention for speed changing. Moreover, the sensor enables the subject to make a convenient and safe stop using gesture recognition. For further cost reduction, the novel interactive treadmill was based on an inexpensive treadmill platform and a novel high-level speed control scheme was applied to maximize performance for simulating overground walking. Pilot tests with ten healthy subjects were conducted and results demonstrated that the proposed treadmill achieves similar performance to a typical, costly, interactive treadmill that contains a motion capture system and an instrumented treadmill, while providing a convenient and safe method for stopping.

The cost-effectiveness of household photovoltaic systems in reducing greenhouse gas emissions in Australia: Linking subsidies with emission reductions

International Nuclear Information System (INIS)

Burtt, D.; Dargusch, P.

2015-01-01

Highlights: • Payback period for Australian household PV fell to four years in 2011 and 2012. • PV became attractive due to high feed-in tariffs and declining PV costs. • Cost was AU$200/t CO 2 e in 2010, expected to be AU$65 to AU$100/t CO 2 e by 2020. • PV resulted in greenhouse gas emissions reducing by 3.7 million t CO 2 e in 2013. • PV expected to reduce greenhouse gas emissions by 8 million t CO 2 e in 2020. - Abstract: This paper examines the cost-effectiveness of subsidies (feed-in tariffs and renewable energy credits) paid for by electricity consumers to support the uptake of roof top photovoltaic (PV) systems by households in Australia. We estimate annual payback periods, and then regress these against the actual uptake of household PV and associated emission reductions, creating a relationship not apparent in other research. Sensitivity analysis reveals that the declining cost of PV panels had most impact on PV uptake followed by feed-in tariffs, renewable energy credits and the increasing cost of household electricity tariffs. Our modelling shows that feed-in tariffs were higher than necessary to achieve the resultant levels of PV uptake and that the low cost of PV panels and comparatively high electricity tariffs are likely to result in a continuing strong uptake of household PV in Australia. Our modelling shows that subsidies peaked in 2011 and 2012, with payback periods of three to four years, having since increased to five to six years. Emission reduction costs are expected to reduce from over AU$200 per t CO 2 e in 2013 to between AU$65 and AU$100 per t CO 2 e in 2020. Household PV reduced Australia’s emissions by 3.7 million t CO 2 e in 2013 (1.7% of Australia’s total emissions) and is expected to reach eight million tonnes (3.7% of Australia’s total emissions) by 2020

The reduction of oil pollutants of petroleum products storage-tanks sludge using low-cost adsorbents

Directory of Open Access Journals (Sweden)

Mokhtari-Hosseini Zahra Beagom

2017-01-01

Full Text Available Disposal of storage tank sludge in oil depots is a major environmental concern due to the high concentration of hydrocarbons involved. This paper investigates the reduction of the sludge oil pollutants with initial oil and grease concentration of about 50 mass% using low cost adsorbents. Among the examined adsorbents, sawdust indicated the maximum removal of oil and grease. The screening and optimizing of process parameters were evaluated employing Plackett-Burman design and response surface method. For the optimized conditions, more than 60 mass% of oil and grease from the sludge was removed. Moreover, it was found that sawdust adsorption of the oil and grease approximately followed the Freundlich isotherm. The results indicated that oil pollutants of sludge could be reduced using sawdust as a low-cost, available and flammable adsorbent so that thus saturated adsorbents could be used as fuel in certain industries.

The impact of BPO on cost reduction in mid-sized health care systems.

Science.gov (United States)

Perry, Andy; Kocakülâh, Mehmet C

2010-01-01

At the convergence of two politico-economic "hot topics" of the day--outsourcing and the cost of health care-lie opportunities for mid-sized health systems to innovate, collaborate, and reduce overhead. Competition in the retail health care market can serve as both an impetus and an inhibitor to such measures, though. Here we are going to address the motivations, influences, opportunities, and limitations facing mid-sized, US non-profit health systems in business process outsourcing (BPO). Advocates cite numerous benefits to BPO, particularly in cost reduction and strategy optimization. BPO can elicit cost savings due to specialization among provider firms, returns to scale and technology, standardization and automation, and gains in resource arbitrage (off-shoring capabilities). BPO can also free an organization of non-critical tasks and focus resources on core competencies (treating patients). The surge in BPO utilization has rarely extended to the back-office functions of many mid-sized health systems. Health care providers, still a largely fragmented bunch with many rural, independent non-profit systems, have not experienced the consolidation and organizational scale growth to make BPO as attractive as other industries. Smaller firms, spurning merger and acquisition pressure from large, tertiary health systems, often wish to retain their autonomy and identity; hence, they face a competitive cost disadvantage compared to their larger competitors. This article examines the functional areas for these health systems in which BPO is not currently utilized and dissects the various methods available in which to practice BPO. We assess the ongoing adoption of BPO in these areas as well as the barriers to adoption, and identify the key processes that best represent opportunity for success. An emphasis is placed on a collaborative model with other health systems compared to a single system, unilateral BPO arrangement.

SWaP Reduction for Lost-Cost Star Tracker

Data.gov (United States)

National Aeronautics and Space Administration — In the last two years, a low-cost star tracker has been developed for suborbital applications. Currently the system weighs ~9 lbm, uses ~16W and has a parts cost of...

Homogeneous Crystallization of Micro-DispensedTIPS-Pentacene Using a Two-Solvent System toEnable Printed Inverters on Foil Substrates

Directory of Open Access Journals (Sweden)

Indranil Bose

2015-08-01

Full Text Available We report on a micro-dispensing system for 6,13-Bis(triisopropylsilylethynylpentacene (TIPS-pentacene to enable homogenous crystallization and uniform filmmorphology of the dispensed droplets using a two-solvent mixture along with the use of aninsulating binder. This solution composition results in a controlled evaporation of the dropletin ambient air such that the Marangoni flow counteracts the outward convective flow toenable uniform radial crystal growth from the edge towards the center of the drops.The consequence of this process is the high degree of uniformity in the crystallization of thedrops, which results in a reduction in the performance spread of the organic field effecttransistors (OFET created using this process. The addition of the insulating binder furtherimproves the reduction in the spread of the results as a trade-off to the reduction in mobilityof the transistors. The transfer curves of the OFETs show a tight grouping due to thecontrolled self-alignment of the TIPS-pentacene crystals; this repeatability was furtherhighlighted by fabricating p-type inverters with driver to load ratios of 8:1, wherein theoutput inverter curves were also grouped tightly while exhibiting a gain of greater than 4 inthe switching region. Therefore, the reliability and repeatability of this process justifies itsuse to enable large area solution-processed printed circuits at the cost of reduced mobility.

Past and Future Cost of Wind Energy: Preprint

Energy Technology Data Exchange (ETDEWEB)

Lantz, E.; Hand, M.; Wiser, R.

2012-08-01

The future of wind power will depend on the ability of the industry to continue to achieve cost reductions. To better understand the potential for cost reductions, this report provides a review of historical costs, evaluates near-term market trends, and summarizes the range of projected costs. It also notes potential sources of future cost reductions.

Predictive Engineering Tools for Injection-Molded Long-Carbon-Thermoplastic Composites: Weight and Cost Analyses

Energy Technology Data Exchange (ETDEWEB)

Nguyen, Ba Nghiep [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Fifield, Leonard S. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gandhi, Umesh N. [Toyota Research Inst. North America, Ann Arbor, MI (United States); Mori, Steven [MAGNA Exteriors and Interiors Corporation, Aurora, ON (Canada); Wollan, Eric J. [PlastiComp, Inc., Winona, MN (United States)

2016-08-01

This project proposed to integrate, optimize and validate the fiber orientation and length distribution models previously developed and implemented in the Autodesk Simulation Moldflow Insight (ASMI) package for injection-molded long-carbon-fiber thermoplastic composites into a cohesive prediction capability. The current effort focused on rendering the developed models more robust and efficient for automotive industry part design to enable weight savings and cost reduction. The project goal has been achieved by optimizing the developed models, improving and integrating their implementations in ASMI, and validating them for a complex 3D LCF thermoplastic automotive part (Figure 1). Both PP and PA66 were used as resin matrices. After validating ASMI predictions for fiber orientation and fiber length for this complex part against the corresponding measured data, in collaborations with Toyota and Magna PNNL developed a method using the predictive engineering tool to assess LCF/PA66 complex part design in terms of stiffness performance. Structural three-point bending analyses of the complex part and similar parts in steel were then performed for this purpose, and the team has then demonstrated the use of stiffness-based complex part design assessment to evaluate weight savings relative to the body system target (≥ 35%) set in Table 2 of DE-FOA-0000648 (AOI #1). In addition, starting from the part-to-part analysis, the PE tools enabled an estimated weight reduction for the vehicle body system using 50 wt% LCF/PA66 parts relative to the current steel system. Also, from this analysis an estimate of the manufacturing cost including the material cost for making the equivalent part in steel has been determined and compared to the costs for making the LCF/PA66 part to determine the cost per “saved” pound.

Cost reduction at NSP using IPE results

International Nuclear Information System (INIS)

Asmus, T.J.

1995-01-01

Operating nuclear power generating facilities are under increasing pressure to reduce costs to be able to compete successfully in the competitive electric sales market of today. With the completion of the individual plant evaluations (IPEs), numerous opportunities exist for application of probabilistic risk assessment methodology to reduce production costs. This paper presents two nontraditional methods in which IPE results can be used to help reduce nuclear insurance coverage limits and local property taxes. Significant savings can be realized through use of either of these two methods

Reduction Behaviors of Carbon Composite Iron Oxide Briquette Under Oxidation Atmosphere

Energy Technology Data Exchange (ETDEWEB)

Lee, Ki-Woo; Kim, Kang-Min; Kwon, Jae-Hong; Han, Jeong-Whan [Inha University, Incheon (Korea, Republic of); Son, Sang-Han [POSCO, Pohang (Korea, Republic of)

2017-01-15

The carbon composite iron oxide briquette (CCB) is considered a potential solution to the upcoming use of low grade iron resources in the ironmaking process. CCB is able to reduce raw material cost by enabling the use of low grade powdered iron ores and coal. Additionally, the fast reduction of iron oxides by direct contact with coal can be utilized. In this study, the reduction behaviors of CCB were investigated in the temperature range of 200-1200 ℃ under oxidizing atmosphere. Briquettes were prepared by mixing iron ore and coal in a weight ratio of 8:2. Then reduction experiments were carried out in a mixed gas atmosphere of N{sub 2}, O{sub 2}, and CO{sub 2}. Compressive strength tests and quantitative analysis were performed by taking samples at each target temperature. In addition, the reduction degree depending on the reaction time was evaluated by off-gas analysis during the reduction test. It was found that the compressive strength and the metallization degree of the reduced briquettes increased with increases in the reaction temperature and holding time. However, it tended to decrease when the re-oxidation phenomenon was caused by injected oxygen. The degree of reduction reached a maximum value in 26 minutes. Therefore, the re-oxidation phenomenon becomes dominant after 26 minutes.

Innovative Home Visit Models Associated With Reductions In Costs, Hospitalizations, And Emergency Department Use.

Science.gov (United States)

Ruiz, Sarah; Snyder, Lynne Page; Rotondo, Christina; Cross-Barnet, Caitlin; Colligan, Erin Murphy; Giuriceo, Katherine

2017-03-01

While studies of home-based care delivered by teams led by primary care providers have shown cost savings, little is known about outcomes when practice-extender teams-that is, teams led by registered nurses or lay health workers-provide home visits with similar components (for example, care coordination and education). We evaluated findings from five models funded by Health Care Innovation Awards of the Centers for Medicare and Medicaid Services. Each model used a mix of different components to strengthen connections to primary care among fee-for-service Medicare beneficiaries with multiple chronic conditions; these connections included practice-extender home visits. Two models achieved significant reductions in Medicare expenditures, and three models reduced utilization in the form of emergency department visits, hospitalizations, or both for beneficiaries relative to comparators. These findings present a strong case for the potential value of home visits by practice-extender teams to reduce Medicare expenditures and service use in a particularly vulnerable and costly segment of the Medicare population. Project HOPE—The People-to-People Health Foundation, Inc.

Cooperation control strategies for China's cross-region pollution in a lake basin based on green reduction cost.

Science.gov (United States)

Li, Changmin; Sun, Dong; Xie, Xiaoqiang; Xue, Jian

2016-05-01

The cross-region water pollution issue has always been the widespread concern around the world. It becomes especially critical for China due to the imbalance relates to environmental costs that have accompanied rapid growth of economy. Though the government makes great efforts to improve it, the potential for water pollution conflict is still great. We consider the problem of determining combined control strategies for China's cross-region lake pollution based on the environmental green costs. The problem is first formulated as a generalized bilevel mathematical program where the upper level consists in each region that reduces environmental green costs including three parts: the reduction cost, pollution permit trade cost and cost of environment damage, while the lower level is represented by pollution permit equilibrium market. Finally, we take an empirical analysis in Taihu lake. The numerical study shows that the minimum costs of both total and regional are obviously superior to the current processing costs, which provides theoretical basis for the price of emission permits. Today, China's rapid gross domestic product (GDP) growth has come at a very high cost, as real estate prices have skyrocketed, the wealth gap has widened, and environmental pollution has worsened. China's central government is urged to correct the GDP-oriented performance evaluation system that is used to judge administrative region leaders. The cross-region water pollution issue has become a troubling issue that urgently needs to be resolved in China. This paper will not only actively aid efforts to govern Lake Taihu and other cross-region valleys, but it will also provide a supplement for theoretical research on cross-region pollution issues.

Generation IV Nuclear Energy Systems Construction Cost Reductions Through the Use of Virtual Environments

International Nuclear Information System (INIS)

Timothy Shaw; Vaugh Whisker

2004-01-01

The objective of this multi-phase project is to demonstrate the feasibility and effectiveness of using full-scale virtual reality simulation in the design, construction, and maintenance of future nuclear power plants. The project will test the suitability of immersive virtual reality technology to aid engineers in the design of the next generation nuclear power plant and to evaluate potential cost reductions that can be realized by optimization of installation and construction sequences. The intent is to see if this type of information technology can be used in capacities similar to those currently filled by full-scale physical mockups. This report presents the results of the completed project

Generation IV Nuclear Energy Systems Construction Cost Reductions Through the Use of Virtual Environments

Energy Technology Data Exchange (ETDEWEB)

Timothy Shaw; Vaugh Whisker

2004-02-28

The objective of this multi-phase project is to demonstrate the feasibility and effectiveness of using full-scale virtual reality simulation in the design, construction, and maintenance of future nuclear power plants. The project will test the suitability of immersive virtual reality technology to aid engineers in the design of the next generation nuclear power plant and to evaluate potential cost reductions that can be realized by optimization of installation and construction sequences. The intent is to see if this type of information technology can be used in capacities similar to those currently filled by full-scale physical mockups. This report presents the results of the completed project.

Achieving Cost Reduction Through Data Analytics.

Science.gov (United States)

Rocchio, Betty Jo

2016-10-01

The reimbursement structure of the US health care system is shifting from a volume-based system to a value-based system. Adopting a comprehensive data analytics platform has become important to health care facilities, in part to navigate this shift. Hospitals generate plenty of data, but actionable analytics are necessary to help personnel interpret and apply data to improve practice. Perioperative services is an important revenue-generating department for hospitals, and each perioperative service line requires a tailored approach to be successful in managing outcomes and controlling costs. Perioperative leaders need to prepare to use data analytics to reduce variation in supplies, labor, and overhead. Mercy, based in Chesterfield, Missouri, adopted a perioperative dashboard that helped perioperative leaders collaborate with surgeons and perioperative staff members to organize and analyze health care data, which ultimately resulted in significant cost savings. Copyright © 2016 AORN, Inc. Published by Elsevier Inc. All rights reserved.

A Single-use Strategy to Enable Manufacturing of Affordable Biologics

Directory of Open Access Journals (Sweden)

Renaud Jacquemart

2016-01-01

Full Text Available The current processing paradigm of large manufacturing facilities dedicated to single product production is no longer an effective approach for best manufacturing practices. Increasing competition for new indications and the launch of biosimilars for the monoclonal antibody market have put pressure on manufacturers to produce at lower cost. Single-use technologies and continuous upstream processes have proven to be cost-efficient options to increase biomass production but as of today the adoption has been only minimal for the purification operations, partly due to concerns related to cost and scale-up. This review summarizes how a single-use holistic process and facility strategy can overcome scale limitations and enable cost-efficient manufacturing to support the growing demand for affordable biologics. Technologies enabling high productivity, right-sized, small footprint, continuous, and automated upstream and downstream operations are evaluated in order to propose a concept for the flexible facility of the future.

Enabling CoO improvement thru green initiatives

Science.gov (United States)

Gross, Eric; Padmabandu, G. G.; Ujazdowski, Richard; Haran, Don; Lake, Matt; Mason, Eric; Gillespie, Walter

2015-03-01

Chipmakers continued pressure to drive down costs while increasing utilization requires development in all areas. Cymer's commitment to meeting customer's needs includes developing solutions that enable higher productivity as well as lowering cost of lightsource operation. Improvements in system power efficiency and predictability were deployed to chipmakers' in 2014 with release of our latest Master Oscillating gas chamber. In addition, Cymer has committed to reduced gas usage, completing development in methods to reduce Helium gas usage while maintaining superior bandwidth and wavelength stability. The latest developments in lowering cost of operations are paired with our advanced ETC controller in Cymer's XLR 700ix product.

Assessing the Effect of Potential Reductions in Non-Hepatic Mortality on the Estimated Cost-Effectiveness of Hepatitis C Treatment in Early Stages of Liver Disease

Science.gov (United States)

Chesson, Harrell W.; Spradling, Philip R.; Holmberg, Scott D.

2018-01-01

Background Most cost-effectiveness analyses of hepatitis C (HCV) therapy focus on the benefits of reducing liver-related morbidity and mortality. Objectives Our objective was to assess how cost-effectiveness estimates of HCV therapy can vary depending on assumptions regarding the potential impact of HCV therapy on non-hepatic mortality. Methods We adapted a state-transition model to include potential effects of HCV therapy on non-hepatic mortality. We assumed successful treatment could reduce non-hepatic mortality by as little as 0 % to as much as 100 %. Incremental cost-effectiveness ratios were computed comparing immediate treatment versus delayed treatment and comparing immediate treatment versus non-treatment. Results Comparing immediate treatment versus delayed treatment, when we included a 44 % reduction in nonhepatic mortality following successful HCV treatment, the incremental cost per quality-adjusted life year (QALY) gained by HCV treatment fell by 76 % (from US$314,100 to US$76,900) for patients with no fibrosis and by 43 % (from US$62,500 to US$35,800) for patients with moderate fibrosis. Comparing immediate treatment versus non-treatment, assuming a 44 % reduction in non-hepatic mortality following successful HCV treatment, the incremental cost per QALY gained by HCV treatment fell by 64 % (from US$186,700 to US$67,300) for patients with no fibrosis and by 27 % (from US$35,000 to US$25,500) for patients with moderate fibrosis. Conclusion Including reductions in non-hepatic mortality from HCV treatment can have substantial effects on the estimated cost-effectiveness of treatment. PMID:27480538

Cost avoidance techniques through the Fernald controlled area trash segregation program and the RIMIA solid waste reduction program

International Nuclear Information System (INIS)

Menche, C.E.

1997-01-01

The Fernald Environmental Management Project is a Department of Energy owned facility that produced high quality uranium metals for military defense. The Fernald mission has changed from one of production to remediation. Remediation is intended to clean up legacy (primary) waste from past practices. Little opportunity is available to reduce the amount of primary waste. However, there is an opportunity to reduce secondary waste generation, primarily through segregation. Two programs which accomplish this are the Controlled Area Trash Segregation Program and the RIMIA Solid Waste Reduction Program. With these two programs now in place at the FEMP, it has been estimated that a 60% reduction has been achieved in unnecessary clean waste being disposed as Low Level Waste at the Nevada Test Site. The cost savings associated with these programs (currently 79,000 cubic feet, $428,000) could easily run into the millions of dollars based on the upcoming restoration activities to be undertaken. The segregation of non-radiological waste in the radiologically Controlled Area not only establishes a firm commitment to send only low-level radioactive waste to the Nevada Test Site, but also results in substantial cost avoidance

Flexible and Cost Efficient Power Consumption using Economic MPC

DEFF Research Database (Denmark)

Hovgaard, Tobias Gybel; Larsen, Lars F.S.; Jørgensen, John Bagterp

2011-01-01

the formulation of a new cost function for our proposed power management. Hereby the refrigeration system is enabled to contribute with ancillary services to the balancing power market. Since significant amounts of regulating power is needed for a higher penetration of intermittent renewable energy sources...... such as wind turbines this feature is in high demand in a future intelligent power grid (Smart Grid). Our perspective is seen from the refrigeration system but as it is demonstrated the involvement in the balancing market can be economically beneficial for the system itself while delivering crucial services...... that reduces operation costs by utilizing the thermal storage capabilities. In the study we specifically address advantages coming from daily variations in outdoor temperature and electricity prices but other aims such as peak load reduction are also considered. An important contribution of this paper is also...

Information technology as a key enabler in preparing for competition: ComEd's Kincaid Generating Station, a work in progress

International Nuclear Information System (INIS)

Borth, F.C. III; Thompson, J.W.; Mishaga, J.M.

1996-01-01

Through ComEd Fossil (Generating) Division's Competitive Action Plan (CAP) evaluation changes have been identified which are necessary to improve generating station performance. These changes are intended to improve both station reliability and financial margins, and are essential for stations to be successful in a competitive marketplace. Plant upgrades, advanced equipment stewardship, and personnel reductions have been identified as necessary steps in achieving industry leadership and competitive advantage. To deal effectively with plant systems and contend in the competitive marketplace Information Technology (IT) solutions to business problems are being developed. Data acquisition, storage, and retrieval are being automated through use of state-of-the-art Data Historians. Total plant, high resolution, long term process information will be accessed through Local/Wide Area Networks (LAN/WAN) connections from desktop PC's. Generating unit Thermal Performance Monitors accessing the Data Historian will analyze plant and system performance enabling reductions in operating costs, and improvements in process control. As inputs to proactive maintenance toolsets this data allows anticipation of equipment service needs, advanced service scheduling, and cost/benefit analysis. The ultimate goal is to optimize repair needs with revenue generation. Advanced applications building upon these foundations will bring knowledge of the costs associated with all the products a generating station offers its customer(s). An overall design philosophy along with preliminary results is presented; these results include shortfalls, lessons learned, and future options

What reductions in dependency costs result from treatment in an inpatient neurological rehabilitation unit for people with stroke?

Science.gov (United States)

O'Connor, Rory J; Beden, Rushdy; Pilling, Andrew; Chamberlain, M Anne

2011-02-01

This paper examines the reductions in care costs that result from inpatient multidisciplinary rehabilitation for younger people with acquired brain injury. Thirty-five consecutive patients admitted following a stroke over one year were recruited to this observational study. Physical ability, dependency and potential community care costs were measured on admission and discharge. Fifty-one community-dwelling patients were transferred to rehabilitation from acute medical wards in a large teaching hospital; 35 met the inclusion criteria. After a median of 59 days of rehabilitation, 29 patients were discharged home and six to nursing homes. Patients made highly significant gains in physical ability (median Barthel index 50 to 64; p rehabilitation costs was 21 weeks. Savings occurred in those with moderate and severe disability and they have the potential to continue to accrue for over 12 years. Similar results will probably be found for rehabilitation in other forms of acquired brain injury.

Canadian options for greenhouse gas emission reduction (COGGER)

International Nuclear Information System (INIS)

Robinson, J.; Fraser, M.; Haites, E.; Harvey, D.; Jaccard, M.; Reinsch, A.; Torrie, R.

1993-09-01

A panel was formed to assess the feasibility and cost of energy-related greenhouse gas (GHG) emissions reduction in Canada. The panel studies focused on the potential for increased energy efficiency and fuel switching and their effect in reducing CO 2 emissions by reviewing the extensive literature available on those topics and assessing their conclusions. Economically feasible energy savings are estimated mostly in the range of 20-40% savings by the year 2010 relative to a reference-case projection, with a median of 23%. The panel concluded that achieving the identified economic potential for increased energy efficiency by 2010 will depend on development of additional demand-side management or energy efficiency programs that go well beyond current policies and programs. Fuel switching will play a much smaller role in stabilizing energy-related CO 2 emissions than improved energy efficiency. Technology substitution and broader structural change would enable Canada to achieve significant reductions in CO 2 emissions; however, more research is needed on achieving emission reductions that would approach the levels estimated to be required globally for stabilization of atmospheric CO 2 concentrations. Achieving such emissions reductions would likely require a combination of significant improvements in energy efficiency, major changes in energy sources, and substantial changes in economic activity and life styles, relative to that projected in most reference-case forecasts. 5 refs., 1 fig., 10 tabs

Complexity Reduction of Multiphase Flows in Heterogeneous Porous Media

KAUST Repository

Ghommem, Mehdi

2015-04-22

In this paper, we apply mode decomposition and interpolatory projection methods to speed up simulations of two-phase flows in heterogeneous porous media. We propose intrusive and nonintrusive model-reduction approaches that enable a significant reduction in the size of the subsurface flow problem while capturing the behavior of the fully resolved solutions. In one approach, we use the dynamic mode decomposition. This approach does not require any modification of the reservoir simulation code but rather post-processes a set of global snapshots to identify the dynamically relevant structures associated with the flow behavior. In the second approach, we project the governing equations of the velocity and the pressure fields on the subspace spanned by their proper-orthogonal-decomposition modes. Furthermore, we use the discrete empirical interpolation method to approximate the mobility-related term in the global-system assembly and then reduce the online computational cost and make it independent of the fine grid. To show the effectiveness and usefulness of the aforementioned approaches, we consider the SPE-10 benchmark permeability field, and present a numerical example in two-phase flow. One can efficiently use the proposed model-reduction methods in the context of uncertainty quantification and production optimization.

Estimated medical cost reductions for paliperidone palmitate vs placebo in a randomized, double-blind relapse-prevention trial of patients with schizoaffective disorder.

Science.gov (United States)

Joshi, K; Lin, J; Lingohr-Smith, M; Fu, D J

2015-01-01

The objective of this economic model was to estimate the difference in medical costs among patients treated with paliperidone palmitate once-monthly injectable antipsychotic (PP1M) vs placebo, based on clinical event rates reported in the 15-month randomized, double-blind, placebo-controlled, parallel-group study of paliperidone palmitate evaluating time to relapse in subjects with schizoaffective disorder. Rates of psychotic, depressive, and/or manic relapses and serious and non-serious treatment-emergent adverse events (TEAEs) were obtained from the long-term paliperidone palmitate vs placebo relapse prevention study. The total annual medical cost for a relapse from a US payer perspective was obtained from published literature and the costs for serious and non-serious TEAEs were based on Common Procedure Terminology codes. Total annual medical cost differences for patients treated with PP1M vs placebo were then estimated. Additionally, one-way and Monte Carlo sensitivity analyses were conducted. Lower rates of relapse (-18.3%) and serious TEAEs (-3.9%) were associated with use of PP1M vs placebo as reported in the long-term paliperidone palmitate vs placebo relapse prevention study. As a result of the reduction in these clinical event rates, the total annual medical cost was reduced by $7140 per patient treated with PP1M vs placebo. One-way sensitivity analysis showed that variations in relapse rates had the greatest impact on the estimated medical cost differences (range: -$9786, -$4670). Of the 10,000 random cycles of Monte Carlo simulations, 100% showed a medical cost difference schizoaffective disorder was associated with a significantly lower rate of relapse and a reduction in medical costs compared to placebo. Further evaluation in the real-world setting is warranted.

Is harm reduction profitable? An analytical framework for corporate social responsibility based on an epidemic model of addictive consumption.

Science.gov (United States)

Massin, Sophie

2012-06-01

This article aims to help resolve the apparent paradox of producers of addictive goods who claim to be socially responsible while marketing a product clearly identified as harmful. It advances that reputation effects are crucial in this issue and that determining whether harm reduction practices are costly or profitable for the producers can help to assess the sincerity of their discourse. An analytical framework based on an epidemic model of addictive consumption that includes a deterrent effect of heavy use on initiation is developed. This framework enables us to establish a clear distinction between a simple responsible discourse and genuine harm reduction practices and, among harm reduction practices, between use reduction practices and micro harm reduction practices. Using simulations based on tobacco sales in France from 1950 to 2008, we explore the impact of three corresponding types of actions: communication on damage, restraining selling practices and development of safer products on total sales and on the social cost. We notably find that restraining selling practices toward light users, that is, preventing light users from escalating to heavy use, can be profitable for the producer, especially at early stages of the epidemic, but that such practices also contribute to increase the social cost. These results suggest that the existence of a deterrent effect of heavy use on the initiation of the consumption of an addictive good can shed new light on important issues, such as the motivations for corporate social responsibility and the definition of responsible actions in the particular case of harm reduction. Copyright © 2012 Elsevier Ltd. All rights reserved.

Enabling search services on outsourced private spatial data

KAUST Repository

Yiu, Man Lung; Ghinita, Gabriel; Jensen, Christian Sø ndergaard; Kalnis, Panos

2009-01-01

Cloud computing services enable organizations and individuals to outsource the management of their data to a service provider in order to save on hardware investments and reduce maintenance costs. Only authorized users are allowed to access the data

Enabling MEMS technologies for communications systems

Science.gov (United States)

Lubecke, Victor M.; Barber, Bradley P.; Arney, Susanne

2001-11-01

Modern communications demands have been steadily growing not only in size, but sophistication. Phone calls over copper wires have evolved into high definition video conferencing over optical fibers, and wireless internet browsing. The technology used to meet these demands is under constant pressure to provide increased capacity, speed, and efficiency, all with reduced size and cost. Various MEMS technologies have shown great promise for meeting these challenges by extending the performance of conventional circuitry and introducing radical new systems approaches. A variety of strategic MEMS structures including various cost-effective free-space optics and high-Q RF components are described, along with related practical implementation issues. These components are rapidly becoming essential for enabling the development of progressive new communications systems technologies including all-optical networks, and low cost multi-system wireless terminals and basestations.

Reduction in Fabrication Costs of Gas Diffusion Layers

Energy Technology Data Exchange (ETDEWEB)

Jason Morgan; Donald Connors; Michael Hickner

2012-07-10

Ballard Material Products (BMP) performed a pre-design technical and cost analysis of state of the art production technologies feasible for high volume GDL manufacturing. Based upon criteria that also included environmental health and safety, customer quality requirements, and future needs, BMP selected technologies that can be integrated into its current manufacturing process. These selections included Many-At-A-Time (MAAT) coating and continuous mixing technologies, as well as various on-line process control tools. These processes have allowed BMP to produce high performance GDLs at lower cost for near-term markets, as well as to define the inputs needed to develop a conceptual Greenfield facility to meet the cost targets for automotive volumes of 500,000 vehicles per year.

Cost and waste volume reduction in HEPA filter trains by effective pre-filtration

International Nuclear Information System (INIS)

Chadwick, Chris

2007-01-01

Data published elsewhere (Moore, et al., 1992; Bergman et al., 1997) suggests that the then costs of disposable type Glass Fibre HEPA filtration trains to the DOE was $55 million per year (based on an average usage of HEPA panels of 11,748 pieces per year between 1987 and 1990), $50 million of which was attributable to installation, testing, removal and disposal. The same authors suggest that by 1995 the number of HEPA panels being used had dropped to an estimated 4000 pieces per year due to the ending of the Cold War. The yearly cost to the DOE of 4000 units per year was estimated to be $29.5 million using the same parameters that previously suggested the $55 million figure. Within that cost estimate, $300 each was the value given to the filter and $4,450 was given to peripheral activity per filter. Clearly, if the $4,450 component could be reduced, tremendous saving could result, in addition to a significant reduction in the legacy burden of waste volumes. This same cost is applied to both the 11,748 and 4000 usage figures. The work up to now has focussed on the development of a low cost, long life (cleanable), direct replacement of the traditional filter train. This paper will review an alternative strategy, that of preventing the contaminating dust from reaching and blinding the HEPA filters, and thereby removing the need to replace them. What has become clear is that 'low cost' and 'Metallic HEPA' are not compatible terms. The original Bergman et al., 1997 work suggested that 1000 cfm (cubic feet per minute) (1690 m 3 /hr) stainless HEPAs could be commercially available for $5000 each after development (although the $70,000 development unit may be somewhat exaggerated - the authors own company have estimated development units able to be retrofitted into strengthened standard housings would be available for perhaps $30,000). The likely true cost of such an item produced industrially in significant numbers may be closer to $15,000 each. That being the case, the

Disaster risk reduction and sustainable development

International Nuclear Information System (INIS)

Khurshedi, N.

2005-01-01

During the past four decades, natural hazards such as earthquakes, volcanic activity, and slides, tsunami tropical cyclones and other severe storms, tornadoes and high winds, river floods and coastal flooding, wildfire and associated haze drought, sand/dust storms, and insect infestations have caused major loss of human lives and livelihoods, the destruction of economic and social infrastructure, as well as environmental damages. Economic losses have increased almost ten times during this period. As it happen in recent Asia Tsunami, in which over 2, 00,000 people reportedly killed, estimated five million homeless, and resulted in massive displacement of population and extensive damage to infrastructure. The escalation of severe disaster events triggered by natural hazards and related technological and environment disasters is increasingly threatening both sustainable development and poverty-reduction initiatives. The loss of human lives and the rise in the cost of reconstruction efforts and loss of development assets has forced the issue of disaster reduction and risk management higher on the policy agenda of affected governments as well a multilateral and bilateral agencies and NGOs. For this Disaster risk reduction-.strategies are aimed at enabling societies at risk to become engaged in the conscious management of risk and the reduction of vulnerability. The adoption of appropriate development policies can reduce disaster risk. These policies should be gender sensitive and need the necessary political commitment. They involve the adoption of suitable regulatory and other legal measures, institutional reform, improved analytical and methodological capabilities, financial planning, education and awareness. (author)

A Stackelberg Game Approach in an Integrated Inventory Model with Carbon-Emission and Setup Cost Reduction

Directory of Open Access Journals (Sweden)

Biswajit Sarkar

2016-12-01

Full Text Available This paper formulates an integrated inventory model that allows Stackelberg game policy for optimizing joint total cost of a vendor and buyer system. After receiving the lot, the buyer commences an inspection process to determine the defective items. All defective items the buyer sends to vendor during the receiving of the next lot. Due to increasing number of shipments fixed and variable transportation, as well as carbon emissions, are considered, which makes the model sustainable integrated model forever. To reduce the setup cost for the vendor, a discrete setup reduction is considered for maximization more profit. The players of the integrated model are with unequal power (as leader and follower and the Stackelberg game strategy is utilized to solve this model for obtaining global optimum solution over the finite planning horizon. An illustrative numerical example is given to understand this model clearly.

A protocol for sustained reduction of Total Parenteral Nutrition and cost savings by improvement of nutritional care in hospitals.

Science.gov (United States)

van Schaik, Rian; Van den Abeele, Kurt; Melsens, Glenn; Schepens, Peter; Lanssens, Truus; Vlaemynck, Bernadette; Devisch, Maria; Niewold, Theo A

2016-10-01

Malnutrition and the use of Total Parenteral Nutrition (TPN) contribute considerably to hospital costs. Recently, we reported on the introduction of malnutrition screening and monitoring of TPN use in our hospital, which resulted in a large (40%) reduction in TPN and improved quality of nutritional care in two years (2011/12). Here, we aimed to assure continuation of improved care by developing a detailed malnutrition screening and TPN use protocol involving instruction tools for hospital staff, while monitoring the results in the following two years (2013/14). A TPN decision tree for follow up of TPN in patients and a TP-EN instruction card for caregivers was introduced, showing TPN/EN introduction schedules based on the energy needs of patients according to EB guidelines, also addressing the risk of refeeding syndrome. TPN patients were monitored by dietitians and TPN usage and costs were presented to the (medical) staff. Screening and treatment of malnourished patients by dietitians is simultaneously ongoing. In 2014 48% of patients, hospitalized for at least 48 h, were screened on malnutrition, 17% of them were diagnosed at risk, 7.9% malnourished and treated by dietitians. TPN usage dropped by 53% and cost savings of 51% were obtained due to 50% decrease of TPN users in 2014 versus 2010. TPN over EN ratio dropped from 2.4 in 2010 to 1.2 in 2014. Sustained improvement of nutritional care and reduction of TPN usage and costs is possible by introduction of procedures embedded in the existing structures. Copyright © 2016 European Society for Clinical Nutrition and Metabolism. Published by Elsevier Ltd. All rights reserved.

Economic evaluation of volume reduction for Defense transuranic waste

International Nuclear Information System (INIS)

Brown, C.M.

1982-03-01

The economics of volume reduction of retrievably stored and newly generated DOE transuranic wastes are evaluated by comparing the costs of reduction of the wastes with the savings possible in transportation and disposal. A general approach to the comparison of TRU waste volume reduction costs and cost savings is developed, an initial set of cost data is established, conclusions to support selecting technologies and facilities for the disposal of DOE transuranic waste are developed. Section I outlines the analysis which considers seven types of volume reduction from incineration and compaction of combustibles to compaction, size reduction, shredding, melting, and decontamination of metals. The study considers the volume reduction of contact-handled, newly generated and retrievably stored DOE transuranic wastes. Section II of this report describes the analytical approach, assumptions, and flow of waste material through sites. Section III presents the waste inventories, disposal and transportation savings, and volume reduction techniques and costs. Section IV contains the results and conclusions of the study. The major conclusions drawn from the study are: For DOE sites with a small amount of waste requiring disposal ( 3 /year) the cost of volume reduction is greater than the transportation and disposal savings from volume reduction provided the waste requires little additional preparation to meet transportation and disposal criteria. Wastes that do not meet these criteria require site specific economic analysis outside the general evaluations of this study. For Idaho National Engineering Laboratory, incineration and metal shredding are cost-effective, provided a facility is to be constructed as a consequence of repackaging the fraction of stored waste which may require repackaging and immobilizing chemical process waste to meet disposal criteria

Update on Risk Reduction Activities for a Liquid Advanced Booster for NASA's Space Launch System

Science.gov (United States)

Crocker, Andrew M.; Doering, Kimberly B; Meadows, Robert G.; Lariviere, Brian W.; Graham, Jerry B.

2015-01-01

The stated goals of NASA's Research Announcement for the Space Launch System (SLS) Advanced Booster Engineering Demonstration and/or Risk Reduction (ABEDRR) are to reduce risks leading to an affordable Advanced Booster that meets the evolved capabilities of SLS; and enable competition by mitigating targeted Advanced Booster risks to enhance SLS affordability. Dynetics, Inc. and Aerojet Rocketdyne (AR) formed a team to offer a wide-ranging set of risk reduction activities and full-scale, system-level demonstrations that support NASA's ABEDRR goals. For NASA's SLS ABEDRR procurement, Dynetics and AR formed a team to offer a series of full-scale risk mitigation hardware demonstrations for an affordable booster approach that meets the evolved capabilities of the SLS. To establish a basis for the risk reduction activities, the Dynetics Team developed a booster design that takes advantage of the flight-proven Apollo-Saturn F-1. Using NASA's vehicle assumptions for the SLS Block 2, a two-engine, F-1-based booster design delivers 150 mT (331 klbm) payload to LEO, 20 mT (44 klbm) above NASA's requirements. This enables a low-cost, robust approach to structural design. During the ABEDRR effort, the Dynetics Team has modified proven Apollo-Saturn components and subsystems to improve affordability and reliability (e.g., reduce parts counts, touch labor, or use lower cost manufacturing processes and materials). The team has built hardware to validate production costs and completed tests to demonstrate it can meet performance requirements. State-of-the-art manufacturing and processing techniques have been applied to the heritage F-1, resulting in a low recurring cost engine while retaining the benefits of Apollo-era experience. NASA test facilities have been used to perform low-cost risk-reduction engine testing. In early 2014, NASA and the Dynetics Team agreed to move additional large liquid oxygen/kerosene engine work under Dynetics' ABEDRR contract. Also led by AR, the

Background field removal technique using regularization enabled sophisticated harmonic artifact reduction for phase data with varying kernel sizes.

Science.gov (United States)

Kan, Hirohito; Kasai, Harumasa; Arai, Nobuyuki; Kunitomo, Hiroshi; Hirose, Yasujiro; Shibamoto, Yuta

2016-09-01

An effective background field removal technique is desired for more accurate quantitative susceptibility mapping (QSM) prior to dipole inversion. The aim of this study was to evaluate the accuracy of regularization enabled sophisticated harmonic artifact reduction for phase data with varying spherical kernel sizes (REV-SHARP) method using a three-dimensional head phantom and human brain data. The proposed REV-SHARP method used the spherical mean value operation and Tikhonov regularization in the deconvolution process, with varying 2-14mm kernel sizes. The kernel sizes were gradually reduced, similar to the SHARP with varying spherical kernel (VSHARP) method. We determined the relative errors and relationships between the true local field and estimated local field in REV-SHARP, VSHARP, projection onto dipole fields (PDF), and regularization enabled SHARP (RESHARP). Human experiment was also conducted using REV-SHARP, VSHARP, PDF, and RESHARP. The relative errors in the numerical phantom study were 0.386, 0.448, 0.838, and 0.452 for REV-SHARP, VSHARP, PDF, and RESHARP. REV-SHARP result exhibited the highest correlation between the true local field and estimated local field. The linear regression slopes were 1.005, 1.124, 0.988, and 0.536 for REV-SHARP, VSHARP, PDF, and RESHARP in regions of interest on the three-dimensional head phantom. In human experiments, no obvious errors due to artifacts were present in REV-SHARP. The proposed REV-SHARP is a new method combined with variable spherical kernel size and Tikhonov regularization. This technique might make it possible to be more accurate backgroud field removal and help to achive better accuracy of QSM. Copyright © 2016 Elsevier Inc. All rights reserved.

Process energy reduction

International Nuclear Information System (INIS)

Lowthian, W.E.

1993-01-01

Process Energy Reduction (PER) is a demand-side energy reduction approach which complements and often supplants other traditional energy reduction methods such as conservation and heat recovery. Because the application of PER is less obvious than the traditional methods, it takes some time to learn the steps as well as practice to become proficient in its use. However, the benefit is significant, often far outweighing the traditional energy reduction approaches. Furthermore, the method usually results in a better process having less waste and pollution along with improved yields, increased capacity, and lower operating costs

Do 'enabling technologies' affect customer performance in price-responsive load programs?

International Nuclear Information System (INIS)

Goldman, Charles A.; Kintner-Meyer, Michael; Heffner, Grayson

2002-01-01

Price-responsive load (PRL) programs vary significantly in overall design, the complexity of relationships between program administrators, load aggregators, and customers, and the availability of ''enabling technologies''. Enabling technologies include such features as web-based power system and price monitoring, control and dispatch of curtailable loads, communications and information systems links to program participants, availability of interval metering data to customers in near real time, and building/facility/end-use automation and management capabilities. Two state agencies - NYSERDA in New York and the CEC in California - have been conspicuous leaders in the demonstration of demand response (DR) programs utilizing enabling technologies. In partnership with key stakeholders in these two states (e.g., grid operator, state energy agencies, and program administrators), Lawrence Berkeley National Laboratory (LBNL) and Pacific Northwest National Laboratory (PNNL) surveyed 56 customers who worked with five contractors participating in CEC or NYSERDA-sponsored DR programs. We combined market research and actual load curtailment data when available (i.e., New York) or customer load reduction targets in order to explore the relative importance of contractor's program design features, sophistication of control strategies, and reliance on enabling technologies in predicting customer's ability to deliver load reductions in DR programs targeted to large commercial/industrial customers. We found preliminary evidence that DR enabling technology has a positive effect on load curtailment potential. Many customers indicated that web-based energy information tools were useful for facilitating demand response (e.g., assessing actual performance compared to load reduction contract commitments), that multiple notification channels facilitated timely response, and that support for and use of backup generation allowed customers to achieve significant and predictable load

Peer Review of “LDT Weight Reduction Study with Crash Model, Feasibility and Detailed Cost Analyses – Chevrolet Silverado 1500 Pickup”

Science.gov (United States)

The contractor will conduct an independent peer review of FEV’s light-duty truck (LDT) mass safety study, “Light-Duty Vehicle Weight Reduction Study with Crash Model, Feasibility and Detailed Cost Analysis – Silverado 1500”, and its corresponding computer-aided engineering (CAE) ...

Microgrid Enabled Distributed Energy Solutions (MEDES) Fort Bliss Military Reservation

Science.gov (United States)

2014-02-01

FINAL REPORT Microgrid Enabled Distributed Energy Solutions (MEDES) Fort Bliss Military Reservation ESTCP Project EW-201140 FEBRUARY...TITLE AND SUBTITLE Microgrid Enabled Distributed Energy Solutions (MEDES) 5a. CONTRACT NUMBER W912HQ-11-C-0082 Fort Bliss, Texas...Lockheed Martin’s Intelligent Microgrid Solution can provide more energy security while also lowering electric utility costs and greenhouse gas emissions

Methane emission reduction: an application of FUND

NARCIS (Netherlands)

Tol, R.S.J.; Heintz, R.J.; Lammers, P.E.M.

2003-01-01

Methane is, after carbon dioxide, the most important anthropogenic greenhouse gas. Governments plan to abate methane emissions. A crude set of estimates of reduction costs is included in FUND, an integrated assessment model of climate change. In a cost-benefit analysis, methane emission reduction is

Validation of the OpCost logging cost model using contractor surveys

Science.gov (United States)

Conor K. Bell; Robert F. Keefe; Jeremy S. Fried

2017-01-01

OpCost is a harvest and fuel treatment operations cost model developed to function as both a standalone tool and an integrated component of the Bioregional Inventory Originated Simulation Under Management (BioSum) analytical framework for landscape-level analysis of forest management alternatives. OpCost is an updated implementation of the Fuel Reduction Cost Simulator...

NASP - Enabling new space launch options

Science.gov (United States)

Froning, David; Gaubatz, William; Mathews, George

1990-10-01

Successful NASP developments in the United States are bringing about the possibility of effective, fully reusable vehicles for transport of people and cargo between earth and space. These developments include: extension of airbreathing propulsion to a much higher speed; densification of propellants for greater energy per unit volume of mass; structures with much greater strength-to-weight at high temperatures; computational advancements that enable more optimal design and integration of airframes, engines and controls; and advances in avionics, robotics, artificial intelligence and automation that enable accomplishment of earth-to-orbit (ETO) operations with much less manpower support and cost. This paper describes the relative magnitude of improvement that these developments may provide.

Towards the next generation 23% efficient n-type cells with low cost manufacturing

Energy Technology Data Exchange (ETDEWEB)

Yelundur, Vijay [Suniva Inc., Norcross, GA (United States)

2017-04-19

Suniva, Inc., in collaboration with the University Center for Excellence in Photovoltaics (UCEP) at the Georgia Institute of Technology (GIT) proposed this comprehensive three year program to enable the development of an advanced high performance product that will help the US regain its competitive edge in PV. This project was designed to overcome cost and efficiency barriers through advances in PV science, technology innovation, low-cost manufacturing and full production of ~22.5% efficient n-type Si cells in Norcross, GA. At the heart of the project is the desire to complement the technology being developed concurrently under the Solarmat and ARPAe initiatives to develop a differentiated product superior in both performance and cost effectiveness to the competing alternatives available on the market, and push towards achieving SunShot objectives while ensuring a sustainable business model based on US manufacturing. A significant reduction of the costs in modules produced today will need to combine reductions in wafer costs, cell processing costs as well as module fabrication costs while delivering a product that is not only more efficient under test conditions but also increases the energy yield in outdoor operations. This project will result in a differentiated high performance product and technology that is consistent with sustaining PV manufacturing in the US for a longer term and further highlights the need for continued support for developing the next generation concepts that can keep US manufacturing thriving to support the growing demand for PV in the US and consistent with the US government’s mandates for energy independence.

Biofunctionalized conductive polymers enable efficient CO2 electroreduction

Science.gov (United States)

Coskun, Halime; Aljabour, Abdalaziz; De Luna, Phil; Farka, Dominik; Greunz, Theresia; Stifter, David; Kus, Mahmut; Zheng, Xueli; Liu, Min; Hassel, Achim W.; Schöfberger, Wolfgang; Sargent, Edward H.; Sariciftci, Niyazi Serdar; Stadler, Philipp

2017-01-01

Selective electrocatalysts are urgently needed for carbon dioxide (CO2) reduction to replace fossil fuels with renewable fuels, thereby closing the carbon cycle. To date, noble metals have achieved the best performance in energy yield and faradaic efficiency and have recently reached impressive electrical-to-chemical power conversion efficiencies. However, the scarcity of precious metals makes the search for scalable, metal-free, CO2 reduction reaction (CO2RR) catalysts all the more important. We report an all-organic, that is, metal-free, electrocatalyst that achieves impressive performance comparable to that of best-in-class Ag electrocatalysts. We hypothesized that polydopamine—a conjugated polymer whose structure incorporates hydrogen-bonded motifs found in enzymes—could offer the combination of efficient electrical conduction, together with rendered active catalytic sites, and potentially thereby enable CO2RR. Only by developing a vapor-phase polymerization of polydopamine were we able to combine the needed excellent conductivity with thin film–based processing. We achieve catalytic performance with geometric current densities of 18 mA cm−2 at 0.21 V overpotential (−0.86 V versus normal hydrogen electrode) for the electrosynthesis of C1 species (carbon monoxide and formate) with continuous 16-hour operation at >80% faradaic efficiency. Our catalyst exhibits lower overpotentials than state-of-the-art formate-selective metal electrocatalysts (for example, 0.5 V for Ag at 18 mA cm−1). The results confirm the value of exploiting hydrogen-bonded sequences as effective catalytic centers for renewable and cost-efficient industrial CO2RR applications. PMID:28798958

Potential and cost-effectiveness of CO{sub 2}-reducing measures in the pulp and paper industry

Energy Technology Data Exchange (ETDEWEB)

Moellersten, K.; Westermark, M.; Yan, J. [Royal Institute of Technology (KTH), Stockholm (Sweden). Dept. of Chemical Engineering and Technology/Energy Processes

2001-07-01

Using the two criteria of potential CO{sub 2} reduction and cost of CO{sub 2} reduction several technical options in the pulp and paper industry are investigated. Principal CO{sub 2} reducing measures include: decreasing fuel consumption through improved heat exchanging or new processes with lower heat demand, decreasing electricity consumption, substituting fossil fuels with biofuels, exporting refined biofuels for external use, increasing CO{sub 2} neutral electricity generation, improving waste heat utilization and decreasing specific raw material consumption. The results show that electricity conservation and improvement of existing steam power cycles are the most cost-effective options that have a large potential to reduce CO{sub 2} emissions. Outsourcing of industrial energy operations to utilities may enable CO{sub 2} reducing measures that would not be carried out by industry due to differences in demands for profit on spent capita. 21 refs., 1 fig., 2 tabs.

Reducing surface water pollution through the assessment of the cost-effectiveness of BMPs at different spatial scales.

Science.gov (United States)

Panagopoulos, Y; Makropoulos, C; Mimikou, M

2011-10-01

Two kinds of agricultural Best Management Practices (BMPs) were examined with respect to cost-effectiveness (CE) in reducing sediment, nitrates-nitrogen (NO(3)-N) and total phosphorus (TP) losses to surface waters of the Arachtos catchment in Western Greece. The establishment of filter strips at the edge of fields and a non-structural measure, namely fertilization reduction in alfalfa, combined with contour farming and zero-tillage in corn and reduction of animal numbers in pastureland, were evaluated. The Soil and Water Assessment Tool (SWAT) model was used as the non-point-source (NPS) estimator, while a simple economic component was developed estimating BMP implementation cost as the mean annual expenses needed to undertake and operate the practice for a 5-year period. After each BMP implementation, the ratio of their CE in reducing pollution was calculated for each Hydrologic Response Unit (HRU) separately, for each agricultural land use type entirely and for the whole catchment. The results at the HRU scale are presented comprehensively on a map, demonstrating the spatial differentiation of CE ratios across the catchment that enhances the identification of locations where each BMP is most advisable for implementation. Based on the analysis, a catchment management solution of affordable total cost would include the expensive measure of filter strips in corn and only in a small number of pastureland fields, in combination with the profitable measure of reducing fertilization to alfalfa fields. When examined for its impact on river loads at the outlet, the latter measure led to a 20 tn or 8% annual decrease of TP from the baseline with savings of 15€/kg of pollutant reduction. Filter strips in corn fields reduced annual sediments by 66 Ktn or 5%, NO(3)-N by 71 tn or 9.5% and TP by 27 tn or 10%, with an additional cost of 3.1 €/tn, 3.3 €/kg and 8.1 €/kg of each pollutant respectively. The study concludes that considerable reductions of several

Simple and cost-effective fabrication of size-tunable zinc oxide architectures by multiple size reduction technique

Directory of Open Access Journals (Sweden)

Hyeong-Ho Park, Xin Zhang, Seon-Yong Hwang, Sang Hyun Jung, Semin Kang, Hyun-Beom Shin, Ho Kwan Kang, Hyung-Ho Park, Ross H Hill and Chul Ki Ko

2012-01-01

Full Text Available We present a simple size reduction technique for fabricating 400 nm zinc oxide (ZnO architectures using a silicon master containing only microscale architectures. In this approach, the overall fabrication, from the master to the molds and the final ZnO architectures, features cost-effective UV photolithography, instead of electron beam lithography or deep-UV photolithography. A photosensitive Zn-containing sol–gel precursor was used to imprint architectures by direct UV-assisted nanoimprint lithography (UV-NIL. The resulting Zn-containing architectures were then converted to ZnO architectures with reduced feature sizes by thermal annealing at 400 °C for 1 h. The imprinted and annealed ZnO architectures were also used as new masters for the size reduction technique. ZnO pillars of 400 nm diameter were obtained from a silicon master with pillars of 1000 nm diameter by simply repeating the size reduction technique. The photosensitivity and contrast of the Zn-containing precursor were measured as 6.5 J cm−2 and 16.5, respectively. Interesting complex ZnO patterns, with both microscale pillars and nanoscale holes, were demonstrated by the combination of dose-controlled UV exposure and a two-step UV-NIL.

Simple and cost-effective fabrication of size-tunable zinc oxide architectures by multiple size reduction technique

International Nuclear Information System (INIS)

Park, Hyeong-Ho; Hwang, Seon-Yong; Jung, Sang Hyun; Kang, Semin; Shin, Hyun-Beom; Kang, Ho Kwan; Ko, Chul Ki; Zhang Xin; Hill, Ross H; Park, Hyung-Ho

2012-01-01

We present a simple size reduction technique for fabricating 400 nm zinc oxide (ZnO) architectures using a silicon master containing only microscale architectures. In this approach, the overall fabrication, from the master to the molds and the final ZnO architectures, features cost-effective UV photolithography, instead of electron beam lithography or deep-UV photolithography. A photosensitive Zn-containing sol–gel precursor was used to imprint architectures by direct UV-assisted nanoimprint lithography (UV-NIL). The resulting Zn-containing architectures were then converted to ZnO architectures with reduced feature sizes by thermal annealing at 400 °C for 1 h. The imprinted and annealed ZnO architectures were also used as new masters for the size reduction technique. ZnO pillars of 400 nm diameter were obtained from a silicon master with pillars of 1000 nm diameter by simply repeating the size reduction technique. The photosensitivity and contrast of the Zn-containing precursor were measured as 6.5 J cm −2 and 16.5, respectively. Interesting complex ZnO patterns, with both microscale pillars and nanoscale holes, were demonstrated by the combination of dose-controlled UV exposure and a two-step UV-NIL.

WREF 2012: THE PAST AND FUTURE COST OF WIND ENERGY

Energy Technology Data Exchange (ETDEWEB)

NREL,; Wiser, Ryan; Lantz, Eric; Hand, Maureen

2012-03-26

The future of wind power will depend on the ability of the industry to continue to achieve cost reductions. To better understand the potential for cost reductions, this report provides a review of historical costs, evaluates near-term market trends, and summarizes the range of projected costs. It also notes potential sources of future cost reductions. Our findings indicate that steady cost reductions were interrupted between 2004 and 2010, but falling turbine prices and improved turbine performance are expected to drive a historically low LCOE for current installations. In addition, the majority of studies indicate continued cost reductions on the order of 20%-30% through 2030. Moreover, useful cost projections are likely to benefit from stronger consideration of the interactions between capital cost and performance as well as trends in the quality of the wind resource where projects are located, transmission, grid integration, and other cost variables.

Control and operation cost optimization of the HISS cryogenic system

International Nuclear Information System (INIS)

Porter, J.; Anderson, D.; Bieser, F.

1984-01-01

This chapter describes a control strategy for the Heavy Ion Spectrometer System (HISS), which relies upon superconducting coils of cryostable design to provide a particle bending field of 3 tesla. The control strategy has allowed full time unattended operation and significant operating cost reductions. Microprocessor control of flash boiling style LIN circuits has been successful. It is determined that the overall operating cost of most cryogenic systems using closed loop helium systems can be minimized by properly balancing the total heat load between the helium and nitrogen circuits to take advantage of the non-linearity which exists in the power input to 4K refrigeration characteristic. Variable throughput compressors have the advantage of turndown capability at steady state. It is concluded that a hybrid system using digital and analog input for control, data display and alarms enables full time unattended operation

A decade of cost-reduction in very large telescopes - The SST as prototype of special-purpose telescopes

Science.gov (United States)

Smith, Harlan J.

1989-10-01

Many design and technical innovations over the past ten or fifteen years have reduced the costs of very large telescopes by nearly an order of magnitude over those of classical designs. Still a further order of magnitude reduction is possible if the telescope is specialized for on-axis spectroscopy, giving up especially the luxuries of wide field, multiple focal positions, and access to all the sky at will. The SST (Spectroscopic Survey Telescope) will use eighty-five 1-m circular mirrors mounted in a steel frame composed of hundreds of interlocking tetrahedrons, keeping a fixed elevation angle of 60 deg with rotation only in azimuth. Using an optical fiber it will feed as much light to spectrographs as can be done by a conventional 8-m telescope, yet has a target basic completion cost of only $6 million.

Examples for cost reduction in the design of a WWER-1000 nuclear power plant

International Nuclear Information System (INIS)

Kukkola, T.

1991-01-01

In a design project during recent years, a version for Finnish conditions has been and is being developed based on the Soviet WWER-1000 PWR plant with four horizontal steam generators. The plant will have a double containment. The inner containment will be a dry full pressure prestressed concrete containment with liner and the secondary containment will be made of ordinary concrete. Four train safety approach is adopted. It is supposed that the plant is to be designed according to the present Finnish safety requirements, e.g. severe reactor accidents are considered. When striving at an economic plant no compromises are made as far as safety is concerned. This paper describes possible cost reduction by redesigning the main technical equipment. (author). 1 ref

The Potential of Combined Heat and Power Generation, Wind Power Generation and Load Management Techniques for Cost Reduction in Small Electricity Supply Systems.

Science.gov (United States)

Bass, Jeremy Hugh

Available from UMI in association with The British Library. Requires signed TDF. An evaluation is made of the potential fuel and financial savings possible when a small, autonomous diesel system sized to meet the demands of an individual, domestic consumer is adapted to include: (1) combined heat and power (CHP) generation, (2) wind turbine generation, (3) direct load control. The potential of these three areas is investigated by means of time-step simulation modelling on a microcomputer. Models are used to evaluate performance and a Net Present Value analysis used to assess costs. A cost/benefit analysis then enables those areas, or combination of areas, that facilitate and greatest savings to be identified. The modelling work is supported by experience gained from the following: (1) field study of the Lundy Island wind/diesel system, (2) laboratory testing of a small diesel generator set, (3) study of a diesel based CHP unit, (4) study of a diesel based direct load control system, (5) statistical analysis of data obtained from the long-term monitoring of a large number of individual household's electricity consumption. Rather than consider the consumer's electrical demand in isolation, a more flexible approach is adopted, with consumer demand being regarded as the sum of primarily two components: a small, electricity demand for essential services and a large, reschedulable demand for heating/cooling. The results of the study indicate that: (1) operating a diesel set in a CHP mode is the best strategy for both financial and fuel savings. A simple retrofit enables overall conversion efficiencies to be increased from 25% to 60%, or greater, at little cost. (2) wind turbine generation in association with direct load control is a most effective combination. (3) a combination of both the above areas enables greatest overall financial savings, in favourable winds resulting in unit energy costs around 20% of those of diesel only operation.

Cost and waste volume reduction in HEPA filter trains by effective pre-filtration

International Nuclear Information System (INIS)

Chadwick, Chris; Kaufman, Seth

2006-01-01

Data published elsewhere (Moore, et el 1992; Bergman et al 1997) suggests that the then costs of disposable type Glass Fibre HEPA filtration trains to the DOE was USD 55 million per year (based on an average usage of HEPA panels of 11,748 pieces per year between 1987 and 1990), USD 50 million of which was attributable to installation, testing, removal and disposal - although the life cycle costs are themselves based on estimates dating from 1987-1990. The same authors suggest that by 1995 the number of HEPA panels being used had dropped to an estimated 4000 pieces per year due to the ending of the Cold War. The yearly cost to the DOE of 4000 units per year was estimated to be USD 29.5 million using the same parameters that suggested the previously stated USD 55 million for the larger quantity. Within that cost estimate, USD 300 was the value given to the filter and USD 4,450 was given to peripheral activity per filter. Clearly, if the USD 4,450 component could be reduced, tremendous saving could result, in addition to a significant reduction in the legacy burden of waste volumes. This same cost is applied to both the 11,748 and 4000 usage figures. The work up to now has focussed on the development of a low cost, long life (cleanable) direct replacement of the traditional filter train, but this paper will review an alternative strategy, that of preventing the contaminating dust from reaching and blinding the HEPA filters, and thereby removing the need to replace them. What has become clear is that 'low cost' and 'stainless HEPA' are not compatible terms. The original Bergman et al work suggested that 1000 ft 3 /min stainless HEPAs could be commercially available for USD 5000 each after development (although the USD 70,000 development unit may be somewhat exaggerated - the authors have estimated that development units able to be retro-fitted into strengthened standard housings would be available for perhaps USD 30,000). The likely true cost of such an item produced

Costs of biodiesel supply chain in Latvia

International Nuclear Information System (INIS)

Birzietis, G.; Kunkule, D.

2003-01-01

Biodiesels has already become reality in Latvia, but still not are extensively used due to number of reasons. Cost reduction would be one of the most efficient tools that could encourage wider use of biodiesel. Identifying costs in biodiesel supply chain and evaluating their weight in total cost of final product is the first step to finding most costly elements and potential for cost reduction. General cost breakdown in final price is calculated and analysed in this study (authors)

The impact of transport- and transaction-cost reductions on food markets in developing countries: evidence for tempered expectations for Burkina Faso

NARCIS (Netherlands)

Ruijs, A.J.W.; Schweigman, C.; Lutz, C.

2004-01-01

Reductions in transport and transaction costs are expected to have a major effect on the functioning of food markets in developing countries. For Burkina Faso, this is a relevant issue as it may have important consequences for the food markets in urban and rural deficit areas. A partial equilibrium

The impact of transport- and transaction-cost reductions on food markets in developing countries : evidence for tempered expectations for Burkina Faso

NARCIS (Netherlands)

Ruijs, A.J.W.; Schweigman, C.; Lutz, C.H.M.

2004-01-01

Reductions in transport and transaction costs are expected to have a major effect on the functioning of food markets in developing countries. For Burkina Faso, this is a relevant issue as it may have important consequences for the food markets in urban and rural deficit areas. A partial equilibrium

Principal Components as a Data Reduction and Noise Reduction Technique

Science.gov (United States)

Imhoff, M. L.; Campbell, W. J.

1982-01-01

The potential of principal components as a pipeline data reduction technique for thematic mapper data was assessed and principal components analysis and its transformation as a noise reduction technique was examined. Two primary factors were considered: (1) how might data reduction and noise reduction using the principal components transformation affect the extraction of accurate spectral classifications; and (2) what are the real savings in terms of computer processing and storage costs of using reduced data over the full 7-band TM complement. An area in central Pennsylvania was chosen for a study area. The image data for the project were collected using the Earth Resources Laboratory's thematic mapper simulator (TMS) instrument.

Transformative Reduction of Transportation Greenhouse Gas Emissions. Opportunities for Change in Technologies and Systems

Energy Technology Data Exchange (ETDEWEB)

Vimmerstedt, Laura [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Brown, Austin [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Newes, Emily [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Markel, Tony [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Schroeder, Alex [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Zhang, Yimin [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Chipman, Peter [U.S. Department of Transportation, Washington, D.C. (United States); Johnson, Shawn [U.S. Department of Transportation, Washington, D.C. (United States)

2015-04-30

The transportation sector is changing, influenced by concurrent, ongoing, dynamic trends that could dramatically affect the future energy landscape, including effects on the potential for greenhouse gas emissions reductions. Battery cost reductions and improved performance coupled with a growing number of electric vehicle model offerings are enabling greater battery electric vehicle market penetration, and advances in fuel cell technology and decreases in hydrogen production costs are leading to initial fuel cell vehicle offerings. Radically more efficient vehicles based on both conventional and new drivetrain technologies reduce greenhouse gas emissions per vehicle-mile. Net impacts also depend on the energy sources used for propulsion, and these are changing with increased use of renewable energy and unconventional fossil fuel resources. Connected and automated vehicles are emerging for personal and freight transportation systems and could increase use of low- or non-emitting technologies and systems; however, the net effects of automation on greenhouse gas emissions are uncertain. The longstanding trend of an annual increase in transportation demand has reversed for personal vehicle miles traveled in recent years, demonstrating the possibility of lower-travel future scenarios. Finally, advanced biofuel pathways have continued to develop, highlighting low-carbon and in some cases carbon-negative fuel pathways. We discuss the potential for transformative reductions in petroleum use and greenhouse gas emissions through these emerging transportation-sector technologies and trends and present a Clean Transportation Sector Initiative scenario for such reductions, which are summarized in Table ES-1.

EPRI tailored collaboration 3 Calvert Cliffs cost and volume reduction program

International Nuclear Information System (INIS)

Rigsby, M.D.; Watson, B.A.

1995-01-01

Baltimore Gas ampersand Electric's (BGE) Calvert Cliffs Nuclear Power Plant (CCNPP) is a two unit PWR located approximately 60 miles south of Baltimore, Maryland on the Chesapeake Bay. Both units are of Combustion Engineering design, Unit 1 began commercial operation is 1975 and Unit 2 in 1978. BGE contracted with EPRI to participate in the industry initiative to reduce low-level waste volumes with the expectation to: (1) Reduce O ampersand M costs through LLRW reduction by lowering the volume requiring processing, transportation, and storage/disposal. (2) Manage responsibility available resources; i.e., material, equipment, personnel, etc., through segregation. decontamination, recycling and worker awareness. (3) Improve Calvert Cliff's positive image in the community by minimizing the impact on the environment through generating less LLRW. Baltimore Gas ampersand Electric is committed to effective management of low-level radioactive waste (LLRW) at the Calvert Cliffs Nuclear Power Plant. Established Nuclear Program Policies and Procedures support CCNPP's commitment to minimizing generation of low-level radioactive waste (LLRW). Since the mid 1980's, CCNPP has made progress in reducing the volume of LLRW generated and disposed. EPRI's onsite assessment and subsequent assistance pointed out several areas for improvement

Distributed Wind Cost Reduction: Learning from Solar

Energy Technology Data Exchange (ETDEWEB)

Tegen, Suzanne

2016-02-23

The distributed wind energy industry can learn several lessons from the solar industry regarding reducing soft costs. Suzanne Tegen presented this overview at the 2016 Distributed Wind Energy Association Business Conference in Washington, D.C., on February 23, 2016.

Fulfilling the pedestrian protection directive using a long-wavelength infrared camera designed to meet both performance and cost targets

Science.gov (United States)

Källhammer, Jan-Erik; Pettersson, Håkan; Eriksson, Dick; Junique, Stéphane; Savage, Susan; Vieider, Christian; Andersson, Jan Y.; Franks, John; Van Nylen, Jan; Vercammen, Hans; Kvisterøy, Terje; Niklaus, Frank; Stemme, Göran

2006-04-01

Pedestrian fatalities are around 15% of the traffic fatalities in Europe. A proposed EU regulation requires the automotive industry to develop technologies that will substantially decrease the risk for Vulnerable Road Users when hit by a vehicle. Automatic Brake Assist systems, activated by a suitable sensor, will reduce the speed of the vehicle before the impact, independent of any driver interaction. Long Wavelength Infrared technology is an ideal candidate for such sensors, but requires a significant cost reduction. The target necessary for automotive serial applications are well below the cost of systems available today. Uncooled bolometer arrays are the most mature technology for Long Wave Infrared with low-cost potential. Analyses show that sensor size and production yield along with vacuum packaging and the optical components are the main cost drivers. A project has been started to design a new Long Wave Infrared system with a ten times cost reduction potential, optimized for the pedestrian protection requirement. It will take advantage of the progress in Micro Electro-Mechanical Systems and Long Wave Infrared optics to keep the cost down. Deployable and pre-impact braking systems can become effective alternatives to passive impact protection systems solutions fulfilling the EU pedestrian protection regulation. Low-cost Long Wave Infrared sensors will be an important enabler to make such systems cost competitive, allowing high market penetration.

Tobacco BY-2 Media Component Optimization for a Cost-Efficient Recombinant Protein Production.

Science.gov (United States)

Häkkinen, Suvi T; Reuter, Lauri; Nuorti, Ninni; Joensuu, Jussi J; Rischer, Heiko; Ritala, Anneli

2018-01-01

Plant cells constitute an attractive platform for production of recombinant proteins as more and more animal-free products and processes are desired. One of the challenges in using plant cells as production hosts has been the costs deriving from expensive culture medium components. In this work, the aim was to optimize the levels of most expensive components in the nutrient medium without compromising the accumulation of biomass and recombinant protein yields. Wild-type BY-2 culture and transgenic tobacco BY-2 expressing green fluorescent protein-Hydrophobin I (GFP-HFBI) fusion protein were used to determine the most inexpensive medium composition. One particularly high-accumulating BY-2 clone, named 'Hulk,' produced 1.1 ± 0.2 g/l GFP-HFBI in suspension and kept its high performance during prolonged subculturing. In addition, both cultures were successfully cryopreserved enabling truly industrial application of this plant cell host. With the optimized culture medium, 43-55% cost reduction with regard to biomass and up to 69% reduction with regard to recombinant protein production was achieved.

An IT-enabled supply chain model: a simulation study

Science.gov (United States)

Cannella, Salvatore; Framinan, Jose M.; Barbosa-Póvoa, Ana

2014-11-01

During the last decades, supply chain collaboration practices and the underlying enabling technologies have evolved from the classical electronic data interchange (EDI) approach to a web-based and radio frequency identification (RFID)-enabled collaboration. In this field, most of the literature has focused on the study of optimal parameters for reducing the total cost of suppliers, by adopting operational research (OR) techniques. Herein we are interested in showing that the considered information technology (IT)-enabled structure is resilient, that is, it works well across a reasonably broad range of parameter settings. By adopting a methodological approach based on system dynamics, we study a multi-tier collaborative supply chain. Results show that the IT-enabled supply chain improves operational performance and customer service level. Nonetheless, benefits for geographically dispersed networks are of minor entity.

Software analyzes feasibility of saw kerf reduction for hardwood mills

Science.gov (United States)

Philip H. Steele

2005-01-01

Reductions in saw kerf on head rigs and resaws can dramatically increase lumber recovery in hardwood sawmills. Research has shown that lumber sawing variation reduction will increase lumber recovery above that obtained solely from kerf reduction. Reductions in sawing machine kerf or variation always come at some cost in both capital and variable costs. Determining...

Flexible thin film circuitry enabling ubiquitous electronics via post-fabrication customization (Presentation Recording)

Science.gov (United States)

Cobb, Brian

2015-09-01

For decades, the electronics industry has been accurately described by Moore's Law, where the march towards increasing density and smaller feature sizes has enabled continuous cost reductions and performance improvements. With flexible electronics, this perpetual scaling is not foreseen to occur. Instead, the industry will be dominated by Wright's Law, first proposed in 1936, where increasing demand for high volumes of product will drive costs down. We have demonstrated thin film based circuitry compatible with flexible substrates with high levels of functionality designed for such a high volume industry. This includes a generic 8-bit microprocessor totaling more than 3.5k TFTs operating at 2.1 kHz. We have also developed a post fabrication programming technique via inkjet printing of conductive spots to form a one-time programmable instruction generator, allowing customization of the processor for a specific task. The combination demonstrates the possibility to achieve the high volume production of identical products necessary to reap the benefits promised by Wright's Law, while still retaining the individualization necessary for application differentiation. This is of particular importance in the area of item level identification via RFID, where low cost and individualized identification are necessary. Remotely powered RFID tags have been fabricated using an oxide semiconductor based TFT process. This process is compatible with the post-fabrication printing process to detail individual identification codes, with the goal of producing low cost, high volume flexible tags. The goal is to produce tags compatible with existing NFC communication protocols in order to communicate with readers that are already ubiquitous in the market.

Photovoltaic energy cost limit

International Nuclear Information System (INIS)

Coiante, D.

1992-01-01

Referring to a photovoltaic system for grid connected applications, a parametric expression of kWh cost is derived. The limit of kWh cost is carried out extrapolating the values of cost components to their lowest figure. The reliability of the forecast is checked by disaggregating kWh cost in direct and indirect costs and by discussing the possible cost reduction of each component

Methodology and applications for the benefit cost analysis of the seismic risk reduction in building portfolios at broadscale

OpenAIRE

Valcarcel, Jairo A.; Mora, Miguel G.; Cardona, Omar D.; Pujades, Lluis G.; Barbat, Alex H.; Bernal, Gabriel A.

2013-01-01

This article presents a methodology for an estimate of the benefit cost ratio of the seismic risk reduction in buildings portfolio at broadscale, for a world region, allowing comparing the results obtained for the countries belonging to that region. This methodology encompasses (1) the generation of a set of random seismic events and the evaluation of the spectral accelerations at the buildings location; (2) the estimation of the buildings built area, the economic value, as well as the cla...

Cost reduction through combined solutions?; Kostensenkung durch Kombinationsloesungen?

Energy Technology Data Exchange (ETDEWEB)

Bilitewski, B. [Technische Univ. Dresden (Germany). Inst. fuer Abfallwirtschaft und Altlasten

1998-09-01

The implementation of material-specific residue treatment processes requires reconstruction measures both in the case of mechanical-biological and in that of thermal treatment plants. Such measures involves great uncertainties and wide variation in cost prediction. The present paper deals with various factors that influence the costs of residual waste treatment. [Deutsch] Zur Umsetzung der stoffspezifischen Restabfallbehandlung sind Anpassungen sowohl der derzeit betriebenen mechanisch-biologischen als auch der thermischen Anlagen erforderlich, was zu Unsicherheiten und grossen Schwankungsbreiten bei den Kostenprognosen fuehrt. Der Bericht beleuchtet verschiedene Einflussgroessen auf die Kosten der Behandlung des Restabfalls. (orig./SR)

Results and assessment of participation of VUPEK in coordinated research project of the IAEA ''Comparison of cost-effectiveness of risk reduction among different energy systems''

International Nuclear Information System (INIS)

Kadlec, J.; Horacek, P.

1989-01-01

The results and conclusions are summarized of the research programme ''Comparison of cost-effectiveness of risk reduction among different energy systems'' co-ordinated in 1983 to 1988 by the International Atomic Energy Agency. Institutes in 18 member states were involved which performed 33 case studies in the field of risk reduction in various power systems or their parts. A comparison with cost-effectiveness of risk reduction in other fields was made as well. The health risks (occupational, those of population) and the environmental risks were evaluated. The case studies cover various stages of the decision-making process and various decision makers. The solution resulted in 5 methodological studies and 16 models. 11 case studies and 1 methodological study were conducted by the Research Institute of the Fuel and Energy Complex. The experiences obtained, the questions so far unanswered and recommendations for those who will perform similar studies are given. (author). 1 fig., 2 tabs., 3 refs

UNEP greenhouse gas abatement costing studies

International Nuclear Information System (INIS)

Morthorst, P.E.; Grohnheit, P.E.

1992-04-01

The project initiated by the United Nations Environment Programme aims to clarify some economic issues involved in greenhouse gas limitation by carrying out comparative studies of various nations. The programme should contribute to the establishment of a consistent methodological framework for making cost assessments of greenhouse gas abatement and help to support countries in the process of establishing national and international agreements on actions to combat climate change. The publication gives a survey of Danish energy demand and supply, emissions and current energy policy issues and reviews existing studies of carbon dioxide reductions. This includes the overall national environmental policy and the plan of action for the transport sector. Conclusions are that there seems to be a long-term potential for significant reduction of CO 2 emission by 10-15% by 2010 with no additional costs, a 50% reduction will cost DKK 25-50 per kg reduced CO 2 . The most promising options include increased use of cogeneration of heat and electricity, and electricity conservation in households, services and in industry. Economic growth is forecast as ca. 2.7% and energy prices for oil products should increase by ca. 4.8%. A 40% reduction of CO 2 emission in the year 2005 would increase costs by 1-2%, and a reduction of two thirds of present emission should be possible at no additional cost compared to the reference cases. There is general agreement that a reduction of carbon dioxide emission of 15-30% by 2005-10 should involve no additional costs to society. (AB) (11 refs.)

Applied cost allocation

DEFF Research Database (Denmark)

Bogetoft, Peter; Hougaard, Jens Leth; Smilgins, Aleksandrs

2016-01-01

This paper deals with empirical computation of Aumann–Shapley cost shares for joint production. We show that if one uses a mathematical programing approach with its non-parametric estimation of the cost function there may be observations in the data set for which we have multiple Aumann–Shapley p...... of assumptions concerning firm behavior. These assumptions enable us to connect inefficient with efficient production and thereby provide consistent ways of allocating the costs arising from inefficiency....

Cost Accounting: Production and Equipment Services.

Science.gov (United States)

Schmid, William T.

Cost accounting for audiovisual productions should include direct costs, and, in some cases, the media administrator may have to calculate a per-hour surcharge for general operating overhead as well. Such procedures enable the administrator to determine cost effectiveness, to control cost overruns, and to generate more staff efficiency. Cost…

Greenhouse Gas Mitigation Options in ISEEM Global Energy Model: 2010-2050 Scenario Analysis for Least-Cost Carbon Reduction in Iron and Steel Sector

Energy Technology Data Exchange (ETDEWEB)

Karali, Nihan; Xu, Tengfang; Sathaye, Jayant

2013-12-01

represented, in addition to the extensive data compiled from recent studies on bottom-up representation of efficiency measures for the sector. We also defined various mitigation scenarios including long-term production trends to project country-specific production, energy use, trading, carbon emissions, and costs of mitigation. Such analyses can provide useful information to assist policy-makers when considering and shaping future emissions mitigation strategies and policies. The technical objective is to analyze the costs of production and CO₂ emission reduction in the U.S, China, and India’s iron and steel sectors under different emission reduction scenarios, using the ISEEM-IS as a cost optimization model. The scenarios included in this project correspond to various CO₂ emission reduction targets for the iron and steel sector under different strategies such as simple CO₂ emission caps (e.g., specific reduction goals), emission reduction via commodity trading, and emission reduction via carbon trading.

Nash and integrated solutions in a just-in-time seller-buyer supply chain with buyer's ordering cost reductions

Science.gov (United States)

Lou, Kuo-Ren; Wang, Lu

2016-05-01

The seller frequently offers the buyer trade credit to settle the purchase amount. From the seller's prospective, granting trade credit increases not only the opportunity cost (i.e., the interest loss on the buyer's purchase amount during the credit period) but also the default risk (i.e., the rate that the buyer will be unable to pay off his/her debt obligations). On the other hand, granting trade credit increases sales volume and revenue. Consequently, trade credit is an important strategy to increase seller's profitability. In this paper, we assume that the seller uses trade credit and number of shipments in a production run as decision variables to maximise his/her profit, while the buyer determines his/her replenishment cycle time and capital investment as decision variables to reduce his/her ordering cost and achieve his/her maximum profit. We then derive non-cooperative Nash solution and cooperative integrated solution in a just-in-time inventory system, in which granting trade credit increases not only the demand but also the opportunity cost and default risk, and the relationship between the capital investment and the ordering cost reduction is logarithmic. Then, we use a software to solve and compare these two distinct solutions. Finally, we use sensitivity analysis to obtain some managerial insights.

Heterogeneous electrochemical CO2 reduction using nonmetallic carbon-based catalysts: current status and future challenges

Science.gov (United States)

Ma, Tao; Fan, Qun; Tao, Hengcong; Han, Zishan; Jia, Mingwen; Gao, Yunnan; Ma, Wangjing; Sun, Zhenyu

2017-11-01

Electrochemical CO2 reduction (ECR) offers an important pathway for renewable energy storage and fuels production. It still remains a challenge in designing highly selective, energy-efficient, robust, and cost-effective electrocatalysts to facilitate this kinetically slow process. Metal-free carbon-based materials have features of low cost, good electrical conductivity, renewability, diverse structure, and tunability in surface chemistry. In particular, surface functionalization of carbon materials, for example by doping with heteroatoms, enables access to unique active site architectures for CO2 adsorption and activation, leading to interesting catalytic performances in ECR. We aim to provide a comprehensive review of this category of metal-free catalysts for ECR, providing discussions and/or comparisons among different nonmetallic catalysts, and also possible origin of catalytic activity. Fundamentals and some future challenges are also described.

A study on the reduction in the production cost of the long-running collieries and mechanization of coal mining

Energy Technology Data Exchange (ETDEWEB)

Kim, Young Shik; Hong, Jee Sang; Lee, Kyung Woon; Kim, Oak Hwan; Kim, Dae Kyung [Korea Inst. of Geology Mining and Materials, Taejon (Korea, Republic of)

1995-12-01

The reducing coal market has been enforcing the coal industry to make exceptional rationalization and restructuring efforts since the end of the eighties. To the competition from crude oil and natural gas has been added the growing pressure from rising wages and production cost. To improve the competitive position of the coal mines against oil and gas through cost reduction, studies on mining technology have been carried out. Investigations and analyses on the technologies used in Hanbo Colliery which was designated one of the long term running mines were done and recommendations were made. And also a site test of plough were implemented at the KyungDong Colliery. The mechanization program of 1994 were analyzed and evaluated separately. (author). 38 refs.

Vulnerabilities in First-Generation RFID-enabled Credit Cards

Science.gov (United States)

Heydt-Benjamin, Thomas S.; Bailey, Daniel V.; Fu, Kevin; Juels, Ari; O'Hare, Tom

RFID-enabled credit cards are widely deployed in the United States and other countries, but no public study has thoroughly analyzed the mechanisms that provide both security and privacy. Using samples from a variety of RFID-enabled credit cards, our study observes that (1) the cardholder's name and often credit card number and expiration are leaked in plaintext to unauthenticated readers, (2) our homemade device costing around 150 effectively clones one type of skimmed cards thus providing a proof-of-concept implementation for the RF replay attack, (3) information revealed by the RFID transmission cross contaminates the security of RFID and non-RFID payment contexts, and (4) RFID-enabled credit cards are susceptible in various degrees to a range of other traditional RFID attacks such as skimming and relaying.

Standardized Elemental Basis for Gas-Turbine Engine Heat Exchangers is the Key Factor for Their Cost Reduction

Institute of Scientific and Technical Information of China (English)

Soudarev A.V; Soudarev B.V; Kondratiev V.V; Lazarev M.V

2001-01-01

The competitiveness of the small gas turbine units (GTUs) (Ne＜300 kW) in the world power market is dependent on both the maintenance expenses and the capital costs of production. Reduction in the maintenance expenditures could be achieved by increasing the plant efficiency. This task could be solved by some methods: increasing the cycle inlet temperature TIT, getting the cycle more complex (use of heat regeneration and compressed air intermediate cooling), cutting the power consumption on heat-stressed parts cooling. Putting the above into effect is linked with introduction of novel structural materials, a sharp increase in the mass-size values and the plant manufacture expenditures, in particular, at provision of its self-regulation.In connection with the above, the development of the combined metal-ceramic airheaters and standardization of the elemental basis of the metal gas-gas heat exchangers will promote reduction in the expenditures of the maintenance and the manufacture of the small-size independent power GTEs.

Reduction of medication costs after detoxification for medication-overuse headache.

Science.gov (United States)

Shah, Asif M; Bendtsen, Lars; Zeeberg, Peter; Jensen, Rigmor H

2013-04-01

To examine whether detoxifying patients with medication-overuse headache can reduce long-term medication costs. Direct costs of medications in medication-overuse headache have been reported to be very high but have never been calculated on the basis of exact register data. Long-term economic savings obtained by detoxification have never been investigated. We conducted a registry-based observational retrospective follow-up study on 336 medication-overuse headache patients treated and discharged from the Danish Headache Center over a 2-year period. By means of the Danish Register of Medicinal Product Statistics, we collected information on the costs and use of prescription-only medication 1 year before admission and 1 year after discharge from Danish Headache Center. The average medication costs per patient per year decreased with 24%, from US$971 before treatment to US$737 after (P = .001), and the average medication use decreased with 14.4% (P = .02). Savings were most pronounced for patients overusing triptans. In this group, the average medication costs per patient per year decreased with 43% (P headache at a tertiary headache center has a long-lasting effect on the medication costs and use, in particular among patients overusing triptans. The results may not be generalizable to all countries and may be sensitive to the costs of triptans. © 2012 American Headache Society.

Reformulated gasoline: Costs and refinery impacts

International Nuclear Information System (INIS)

Hadder, G.R.

1994-02-01

Studies of reformulated gasoline (RFG) costs and refinery impacts have been performed with the Oak Ridge National Laboratory Refinery Yield Model (ORNL-RYM), a linear program which has been updated to blend gasolines to satisfy emissions constraints defined by preliminary complex emissions models. Policy makers may use the reformulation cost knee (the point at which costs start to rise sharply for incremental emissions control) to set emissions reduction targets, giving due consideration to the differences between model representations and actual refining operations. ORNL-RYM estimates that the reformulation cost knee for the US East Coast (PADD I) is about 15.2 cents per gallon with a 30 percent reduction of volatile organic compounds (VOCs). The estimated cost knee for the US Gulf Coast (PADD III) is about 5.5 cents per gallon with a VOC reduction of 35 percent. Reid vapor pressure (RVP) reduction is the dominant VOC reduction mechanism. Even with anti-dumping constraints, conventional gasoline appears to be an important sink which permits RFG to be blended with lower aromatics and sulfur contents in PADD III. In addition to the potentially large sensitivity of RFG production to different emissions models, RFG production is sensitive to the non-exhaust VOC share assumption for a particular VOC model. ORNL-RYM has also been used to estimate the sensitivity of RFG production to the cost of capital; to the RVP requirements for conventional gasoline; and to the percentage of RFG produced in a refining region

Analysis of Unit Process Cost for an Engineering-Scale Pyroprocess Facility Using a Process Costing Method in Korea

Directory of Open Access Journals (Sweden)

Sungki Kim

2015-08-01

Full Text Available Pyroprocessing, which is a dry recycling method, converts spent nuclear fuel into U (Uranium/TRU (TRansUranium metal ingots in a high-temperature molten salt phase. This paper provides the unit process cost of a pyroprocess facility that can process up to 10 tons of pyroprocessing product per year by utilizing the process costing method. Toward this end, the pyroprocess was classified into four kinds of unit processes: pretreatment, electrochemical reduction, electrorefining and electrowinning. The unit process cost was calculated by classifying the cost consumed at each process into raw material and conversion costs. The unit process costs of the pretreatment, electrochemical reduction, electrorefining and electrowinning were calculated as 195 US$/kgU-TRU, 310 US$/kgU-TRU, 215 US$/kgU-TRU and 231 US$/kgU-TRU, respectively. Finally the total pyroprocess cost was calculated as 951 US$/kgU-TRU. In addition, the cost driver for the raw material cost was identified as the cost for Li3PO4, needed for the LiCl-KCl purification process, and platinum as an anode electrode in the electrochemical reduction process.

VARIATION OF STRIKE INCENTIVES IN DEEP REDUCTIONS; FINAL

International Nuclear Information System (INIS)

G.H. CANAVAN

2001-01-01

This note studies the sensitivity of strike incentives to deep offensive force reductions using exchange, cost, and game theoretic decision models derived and discussed in companion reports. As forces fall, weapon allocations shift from military to high value targets, with the shift being half complete at about 1,000 weapons. By 500 weapons, the first and second strikes are almost totally on high value. The dominant cost for striking first is that of damage to one's high value, which is near total absent other constraints, and hence proportional to preferences for survival of high value. Changes in military costs are largely offsetting, so total first strike costs change little. The resulting costs at decision nodes are well above the costs of inaction, so the preferred course is inaction for all offensive reductions studied. As the dominant cost for striking first is proportional to the preference for survival of high value. There is a wide gap between the first strike cost and that of inaction for the parameters studied here. These conclusions should be insensitive to significant reductions in the preference for survival of high value, which is the most sensitive parameter

ScreenCube: A 3D Printed System for Rapid and Cost-Effective Chemical Screening in Adult Zebrafish.

Science.gov (United States)

Monstad-Rios, Adrian T; Watson, Claire J; Kwon, Ronald Y

2018-02-01

Phenotype-based small molecule screens in zebrafish embryos and larvae have been successful in accelerating pathway and therapeutic discovery for diverse biological processes. Yet, the application of chemical screens to adult physiologies has been relatively limited due to additional demands on cost, space, and labor associated with screens in adult animals. In this study, we present a 3D printed system and methods for intermittent drug dosing that enable rapid and cost-effective chemical administration in adult zebrafish. Using prefilled screening plates, the system enables dosing of 96 fish in ∼3 min, with a 10-fold reduction in drug quantity compared to that used in previous chemical screens in adult zebrafish. We characterize water quality kinetics during immersion in the system and use these kinetics to rationally design intermittent dosing regimens that result in 100% fish survival. As a demonstration of system fidelity, we show the potential to identify two known chemical inhibitors of adult tail fin regeneration, cyclopamine and dorsomorphin. By developing methods for rapid and cost-effective chemical administration in adult zebrafish, this study expands the potential for small molecule discovery in postembryonic models of development, disease, and regeneration.

Rational design of competitive electrocatalysts for the oxygen reduction reaction in hydrogen fuel cells

Science.gov (United States)

Stolbov, Sergey; Alcántara Ortigoza, Marisol

2012-02-01

The large-scale application of one of the most promising clean and renewable sources of energy, hydrogen fuel cells, still awaits efficient and cost-effective electrocatalysts for the oxygen reduction reaction (ORR) occurring on the cathode. We demonstrate that truly rational design renders electrocatalysts possessing both qualities. By unifying the knowledge on surface morphology, composition, electronic structure and reactivity, we solve that sandwich-like structures are an excellent choice for optimization. Their constituting species couple synergistically yielding reaction-environment stability, cost-effectiveness and tunable reactivity. This cooperative-action concept enabled us to predict two advantageous ORR electrocatalysts. Density functional theory calculations of the reaction free-energy diagrams confirm that these materials are more active toward ORR than the so far best Pt-based catalysts. Our designing concept advances also a general approach for engineering materials in heterogeneous catalysis.

Reduction Expansion Synthesis for Magnetic Alloy Powders

Science.gov (United States)

2015-12-01

in Figure 1, the Army was able to address its need for printable plastic components, thus enabling a reduction in the total quantity of spare...NAVAL POSTGRADUATE SCHOOL MONTEREY, CALIFORNIA THESIS Approved for public release; distribution is unlimited REDUCTION EXPANSION SYNTHESIS FOR...Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202–4302, and to the Office of Management and Budget, Paperwork Reduction Project

Evaluation of cost reduction method for manufacturing ODS ferritic claddings

International Nuclear Information System (INIS)

Fujiwara, Masayuki; Mizuta, Shunji; Ukai, Shigeharu

2000-04-01

For evaluating the fast reactor system technology, it is important to evaluate the practical feasibility of ODS ferritic claddings, which is the most promising materials to attain the goal of high coolant temperature and more than 150 GWd/t. Based on the results of their technology development, mass production process with highly economically benefit as well as manufacturing cost estimation of ODS ferritic claddings were preliminarily conducted. From the view point of future utility scale, the cost for manufacturing mother tubes has a dominant factor in the total manufacturing cost. The method to reduce the cost of mother tube manufacturing was also preliminarily investigated. (author)

Local matching indicators for concave transport costs

OpenAIRE

Delon , Julie; Salomon , Julien; Sobolevskii , A.

2010-01-01

International audience; In this note, we introduce a class of indicators that enable to compute efficiently optimal transport plans associated to arbitrary distributions of $N$ demands and $N$ supplies in $\\mathbf{R}$ in the case where the cost function is concave. The computational cost of these indicators is small and independent of $N$. A hierarchical use of them enables to obtain an efficient algorithm.

Upstream-Downstream Joint Carbon Reduction Strategies Based on Low-Carbon Promotion

Directory of Open Access Journals (Sweden)

Xiqiang Xia

2018-06-01

Full Text Available A differential game model is established to analyze the impact of emissions reduction efforts and low-carbon product promotion on the reduction strategies of low-carbon product manufacturers (subsequently referred to as manufacturers and the retailers of such products in a dynamic environment. Based on this model, changes in emissions reduction efforts and promotional efforts are comparatively analyzed under three scenarios (retailers bearing the promotional cost, manufacturers bearing the promotional cost, and centralized decision-making. The results are as follows: (1 the trajectory of carbon emissions reduction per product unit is the highest when the supply chain is under centralized decision-making, followed by when manufacturers bear the promotional cost, and lastly when retailers bear the cost; (2 when manufacturers bear the promotional cost, the market demand, emissions reduction effort, and promotional effort are higher, although the unit retail price is higher than when retailers bear the promotional cost; and (3 under centralized decision-making, the unit retail price is the lowest; however, sales volume, the emissions reduction effort, and the promotional effort are all higher than those in the other scenarios.

UWB Wind Turbine Blade Deflection Sensing for Wind Energy Cost Reduction.

Science.gov (United States)

Zhang, Shuai; Jensen, Tobias Lindstrøm; Franek, Ondrej; Eggers, Patrick C F; Olesen, Kim; Byskov, Claus; Pedersen, Gert Frølund

2015-08-12

A new application of utilizing ultra-wideband (UWB) technology to sense wind turbine blade deflections is introduced in this paper for wind energy cost reduction. The lower UWB band of 3.1-5.3 GHz is applied. On each blade, there will be one UWB blade deflection sensing system, which consists of two UWB antennas at the blade root and one UWB antenna at the blade tip. The detailed topology and challenges of this deflection sensing system are addressed. Due to the complexity of the problem, this paper will first realize the on-blade UWB radio link in the simplest case, where the tip antenna is situated outside (and on the surface of) a blade tip. To investigate this case, full-blade time-domain measurements are designed and conducted under different deflections. The detailed measurement setups and results are provided. If the root and tip antenna locations are properly selected, the first pulse is always of sufficient quality for accurate estimations under different deflections. The measured results reveal that the blade tip-root distance and blade deflection can be accurately estimated in the complicated and lossy wireless channels around a wind turbine blade. Some future research topics on this application are listed finally.

Grouping eucalyptus species in kraft pulp process for cost reduction

Directory of Open Access Journals (Sweden)

Apiwan Pichayadecha

2014-12-01

Full Text Available The objective of this research is to study the level of the important factors that can decrease total cost of pulp production. First of all, experts and experienced users identify the factors that affect the total production cost by applying the principle of 4M 1E cause and effect diagram. Then the primary factors were chosen based on 80% of their significance and tested by hypothesis for two population means. It was found that at the 95% confidence level the significant factors that have effects on the total production cost are amount of Effective alkali in white liquor and Kappa number. However, the proportion of easy delignification according to Eucalyptus species is considered as a significant factor based on various studies. Box-Behnken experiment is designed with respect to 3 mentioned factors and 3 levels of each factor. The response surface method (RSM is employed to determine the non-linear relation between the total cost as the response and the proportion of easy delignification, amount of Effective alkali in white liquor and Kappa number. To minimize the total cost, the optimal values of each factor are 75% of easy delignification, 112 grams per liter of Effective alkali in white liquor and 13.5 of kappa number. Under this optimal condition, the average total cost per ton of Eucalyptus is 13,393.91 Baht which is significantly less than the total cost of 15,517.06 Baht per ton before improvement.

Carbon abatement potential of solar home systems in India and their cost reduction due to carbon finance

International Nuclear Information System (INIS)

Chaurey, A.; Kandpal, T.C.

2009-01-01

About 78 million rural households in India reportedly lack access to grid electricity. About 67 million of them use kerosene for lighting. Government of India is promoting the use of solar home systems (SHS) as one of the options for meeting lighting requirements in households in remote and less inhabited villages. About 363,399 SHS were reportedly disseminated across the country by December 2007. Apart from meeting the basic lighting need of the households, SHS also help in abating the emissions of green house gases (GHGs) by directly displacing the use of kerosene in households that currently use it for lighting. This study has attempted at estimating the CO 2 mitigation potential of SHS in India by studying the potential for their diffusion and the appropriate baseline. Subsequently, the scope for cost reduction to the user due to carbon finance, if received, is also studied. It is found that carbon finance could reduce the effective burden of SHS to the user by 19% if carbon prices were $10/tCO 2 and no transaction costs were involved in getting the carbon revenues. These benefits are also estimated for scenarios where transaction costs are incurred by the project proponent in getting the carbon benefits

Cost effectiveness of robotics and remote tooling for occupational risk reduction at a nuclear fuel fabrication facility

Energy Technology Data Exchange (ETDEWEB)

Lochard, Jacques

1989-08-01

This case study, related to the design stage of a fuel fabrication facility, presents the evaluation of alternative options to manipulate mixed oxide fuel rods in a quality control shop. It is based on a study performed in the framework of the 'MELOX project' developed by COGEMA in France. The methodology for evaluating robotic actions is resulting from a research work part funded by the IAEA under the co-ordinated research programme on 'Comparison of cost-effectiveness of risk reduction among different energy systems', and by the commission of the European Communities under the research and training programme on radiation protection.

Cost effectiveness of robotics and remote tooling for occupational risk reduction at a nuclear fuel fabrication facility

International Nuclear Information System (INIS)

Lochard, Jacques

1989-01-01

This case study, related to the design stage of a fuel fabrication facility, presents the evaluation of alternative options to manipulate mixed oxide fuel rods in a quality control shop. It is based on a study performed in the framework of the 'MELOX project' developed by COGEMA in France. The methodology for evaluating robotic actions is resulting from a research work part funded by the IAEA under the co-ordinated research programme on 'Comparison of cost-effectiveness of risk reduction among different energy systems', and by the commission of the European Communities under the research and training programme on radiation protection

Developing an optimal energy supply strategy for Syria in view of GHG reduction with least-cost climate protection

International Nuclear Information System (INIS)

Hainoun, A.; Omar, H.; Almoustafa, A.; Seif Al-din, M.Kh.

2010-12-01

This report presents the outcomes of a two years CRP project entitled (Developing an optimal energy supply strategy for Syria in view of GHG reduction with least-cost climate protection). The main activity deals with a case study concerning the assessment of optimal Syrian energy supply strategy taking into account the impact of environmental constraints related to GHG reduction on the cost and prospects of energy sources and technologies with special emphasis on renewable and nuclear options. In a previous activity the future long-term development of Syrian energy and electricity demand has been analyzed according to various scenarios of socio-economic and technological development of the country. The results indicate that energy demand will grow rapidly in the next decades as consequent of many socio-economic and technological factors given by Syria's high population growth, its current economic transition, and its expected economic and technological development, particularly in the industry sector. To meet the projected future energy demand up to 2030, an optimal reference energy supply strategy with minimal supply cost has been developed taking into account, in particular, the availability of national energy resources and diversity of supply options. The analysis has been performed using the IAEA's optimization tool MESSAGE. MESSAGE is suitable to formulate and evaluate alternative energy supply strategies consistent with pre-defined constraints including limits on new investment, fuel availability and trade, environmental regulations, and market penetration rates for new technologies. To evaluate the potential of GHG reduction in the Syrian power sector an alternative energy supply scenario - Mitigation Scenario (Ren S ce) has been introduced reflecting the most probable adaptation measures of this sector to mitigate GHG emission by more dependency on renewable options. Compatible with the Kyoto agreement for developing countries, the CDM is being considered

Complexity reduction of multi-phase flows in heterogeneous porous media

KAUST Repository

Ghommem, Mehdi

2013-01-01

In this paper, we apply mode decomposition and interpolatory projection methods to speed up simulations of two-phase flows in highly heterogeneous porous media. We propose intrusive and non-intrusive model reduction approaches that enable a significant reduction in the dimension of the flow problem size while capturing the behavior of the fully-resolved solutions. In one approach, we employ the dynamic mode decomposition (DMD) and the discrete empirical interpolation method (DEIM). This approach does not require any modification of the reservoir simulation code but rather postprocesses a set of global snapshots to identify the dynamically-relevant structures associated with the flow behavior. In a second approach, we project the governing equations of the velocity and the pressure fields on the subspace spanned by their proper orthogonal decomposition (POD) modes. Furthermore, we use DEIM to approximate the mobility related term in the global system assembly and then reduce the online computational cost and make it independent of the fine grid. To show the effectiveness and usefulness of the aforementioned approaches, we consider the SPE 10 benchmark permeability field and present a variety of numerical examples of two-phase flow and transport. The proposed model reduction methods can be efficiently used when performing uncertainty quantification or optimization studies and history matching.

Mirage: Mitigating Illicit Inventorying in a RFID Enabled Retail Environment

OpenAIRE

White, Jonathan; Banerjee, Nilanjan

2010-01-01

Given its low dollar and maintenance cost, RFID is poised to become the enabling technology for inventory control and supply chain management. However, as an outcome of its low cost, RFID based inventory control is susceptible to pernicious security and privacy threats. A deleterious attack on such a system is corporate espionage, where attackers through illicit inventorying infer sales and restocking trends for products. In this paper, we first present plausible aftermaths of corporate espio...

Marginal abatement cost and carbon reduction potential outlook of key energy efficiency technologies in China's building sector to 2030

International Nuclear Information System (INIS)

Xiao, He; Wei, Qingpeng; Wang, Hailin

2014-01-01

China achieved an energy savings of 67.5 Mtce in the building sector at the end of the 11th Five-Year Plan and set a new target of 116 Mtce by the end of the 12th Five-Year Plan. In this paper, an improved bottom-up model is developed to assess the carbon abatement potential and marginal abatement cost (MAC) of 34 selected energy-saving technologies/measures for China's building sector. The total reduction potential is 499.8 million t-CO 2 by 2030. 4.8 Gt-CO 2 potential will be achieved cumulatively to 2030. By 2030, total primary energy consumption of Chinese building sector will rise continuously to 1343 Mtce in the reference scenario and 1114 Mtce in the carbon reduction scenario. Total carbon dioxide emission will rise to 2.39 Gt-CO 2 and 1.9 Gt-CO 2 in two scenarios separately. The average carbon abatement cost of the aforementioned technologies is 19.5 $/t-CO 2 . The analysis reveals that strengthening successfully energy-saving technologies is important, especially for the residential building sector. The central government's direct investments in such technologies should be reduced without imposing significant negative effects. - Highlights: • MAC of 34 energy-saving technologies of China's building sector is calculated. • Energy use and CO 2 emission of China's building sector by 2030 is forecasted. • The reference and the carbon reduction scenarios are compared

Cost accounting for the radiologist.

Science.gov (United States)

Gentili, Amilcare

2014-05-01

Cost accounting is the branch of managerial accounting that deals with the analysis of the costs of a product or service. This article reviews methods of classifying and allocating costs and relationships among costs, volume, and revenues. Radiology practices need to know the cost of a procedure or service to determine the selling price of a product, bid on contracts, analyze profitability, and facilitate cost control and cost reduction.

Pathways of low carbon transition at the lowest cost. Pathways of low carbon transition in France at the lowest cost - Dynamics and average abatement costs (MACC)

International Nuclear Information System (INIS)

Perrissin Fabert, Baptiste; Foussard, Alexis

2016-11-01

The objective to divide greenhouse gas emissions in France by a factor four by 2050 implies the mobilisation at the lowest cost of the whole set of known sources of reduction of emissions in all economic sectors. In this context, this report is based on a methodology (D-CAM in French for dynamics - average abatement costs, MACC in English for Medium Abatement Cost Curves) which relies on a theoretical business-as-usual scenario, on a database on the potential, rate of development, and cost of mobilizable sources, and on a dynamic model of cost minimisation. The MACC tool is used to explore, for each sector, scenarios of de-carbonation which allow objectives of reduction of greenhouse gas emissions to be reached at different time horizons. An aggregated approach of this tool modifies the distribution of efforts of emission reduction between sectors with respect to a sector-based approach. Thus, a macro-assessment of low carbon transition does not reveal any obvious over-cost with respect to the business-as-usual scenario. A second document is a Power Point presentation which contains the same information, curves and graphs

Optimising risk reduction: An expected utility approach for marginal risk reduction during regulatory decision making

International Nuclear Information System (INIS)

Li Jiawei; Pollard, Simon; Kendall, Graham; Soane, Emma; Davies, Gareth

2009-01-01

In practice, risk and uncertainty are essentially unavoidable in many regulation processes. Regulators frequently face a risk-benefit trade-off since zero risk is neither practicable nor affordable. Although it is accepted that cost-benefit analysis is important in many scenarios of risk management, what role it should play in a decision process is still controversial. One criticism of cost-benefit analysis is that decision makers should consider marginal benefits and costs, not present ones, in their decision making. In this paper, we investigate the problem of regulatory decision making under risk by applying expected utility theory and present a new approach of cost-benefit analysis. Directly taking into consideration the reduction of the risks, this approach achieves marginal cost-benefit analysis. By applying this approach, the optimal regulatory decision that maximizes the marginal benefit of risk reduction can be considered. This provides a transparent and reasonable criterion for stakeholders involved in the regulatory activity. An example of evaluating seismic retrofitting alternatives is provided to demonstrate the potential of the proposed approach.

Cost reduction of electric energy in pumping station of small and medium size water systems; Reducao do custo de energia eletrica em estacoes elevatorias de sistemas de abastecimento de agua de pequeno e medio portes

Energy Technology Data Exchange (ETDEWEB)

Tsutiya, Milton Tomoyuki

1989-12-31

This work presents the main aspects concerning the electric energy cost reduction and includes since simple solutions of easy installation, usually without the need of great study or investment, until the more complex ones that lead to the cost diminution achieved through the energy consumption reduction. Aspects relating to cost abatement accomplished by modifying the pumping operation systems are considered as well. At last, it exposes the conclusions of the work. (author). 69 figs., 14 tabs., 110 refs

Next-generation phage display: integrating and comparing available molecular tools to enable cost-effective high-throughput analysis.

Directory of Open Access Journals (Sweden)

Emmanuel Dias-Neto

2009-12-01

Full Text Available Combinatorial phage display has been used in the last 20 years in the identification of protein-ligands and protein-protein interactions, uncovering relevant molecular recognition events. Rate-limiting steps of combinatorial phage display library selection are (i the counting of transducing units and (ii the sequencing of the encoded displayed ligands. Here, we adapted emerging genomic technologies to minimize such challenges.We gained efficiency by applying in tandem real-time PCR for rapid quantification to enable bacteria-free phage display library screening, and added phage DNA next-generation sequencing for large-scale ligand analysis, reporting a fully integrated set of high-throughput quantitative and analytical tools. The approach is far less labor-intensive and allows rigorous quantification; for medical applications, including selections in patients, it also represents an advance for quantitative distribution analysis and ligand identification of hundreds of thousands of targeted particles from patient-derived biopsy or autopsy in a longer timeframe post library administration. Additional advantages over current methods include increased sensitivity, less variability, enhanced linearity, scalability, and accuracy at much lower cost. Sequences obtained by qPhage plus pyrosequencing were similar to a dataset produced from conventional Sanger-sequenced transducing-units (TU, with no biases due to GC content, codon usage, and amino acid or peptide frequency. These tools allow phage display selection and ligand analysis at >1,000-fold faster rate, and reduce costs approximately 250-fold for generating 10(6 ligand sequences.Our analyses demonstrates that whereas this approach correlates with the traditional colony-counting, it is also capable of a much larger sampling, allowing a faster, less expensive, more accurate and consistent analysis of phage enrichment. Overall, qPhage plus pyrosequencing is superior to TU-counting plus Sanger

An Assessment Of The Effectiveness Of Collaborative Cost ...

African Journals Online (AJOL)

This paper presents the effects of Collaborative Cost Reduction Model (CCRM) as a control Approach to reduce the high cost implication that causes the slow pace of migration process from IPV4 to IPV6 in Nigeria. This study reveals that CCRM can be applied to achieve Cost Reduction in collocation efforts in ...

Reduction in O and M costs in training

International Nuclear Information System (INIS)

Schaffer, R.E.

1991-01-01

In 1988, PSE and G undertook a major effort to identify methods to reduce O and M costs throughout the company. The Nuclear Training Department participated in this project by identifying three management level people to act as analysts. These analysts were responsible for breaking all portions of jobs performed at the training center down to their component parts, identifying tasks which were not essential to meeting the regulatory requirements and the company's business plan, and rolling these task back up into full-time equivalent positions. As a concurrent effort, brain-storming sessions were held with the staff to identify ways to reduce O and M costs, to separate wants from needs, and to work smarter. All these efforts were required to identify a stretch target of 40% savings in the current O and M budget. In addition, ideas from other units in the company which affected training were transmitted to the training department and were reviewed for potential savings. The ideas were assessed for risk, start-up cost and practicality. They were classified as Go, No-go or Further study and were then presented to the company executives. The final results for the Nuclear Training Department showed a total savings potential of 51.4%, of which 12.1% were Go and another 13.6% merited further study

Costs of mitigating CO2 emissions from passenger aircraft

Science.gov (United States)

Schäfer, Andreas W.; Evans, Antony D.; Reynolds, Tom G.; Dray, Lynnette

2016-04-01

In response to strong growth in air transportation CO2 emissions, governments and industry began to explore and implement mitigation measures and targets in the early 2000s. However, in the absence of rigorous analyses assessing the costs for mitigating CO2 emissions, these policies could be economically wasteful. Here we identify the cost-effectiveness of CO2 emission reductions from narrow-body aircraft, the workhorse of passenger air transportation. We find that in the US, a combination of fuel burn reduction strategies could reduce the 2012 level of life cycle CO2 emissions per passenger kilometre by around 2% per year to mid-century. These intensity reductions would occur at zero marginal costs for oil prices between US$50-100 per barrel. Even larger reductions are possible, but could impose extra costs and require the adoption of biomass-based synthetic fuels. The extent to which these intensity reductions will translate into absolute emissions reductions will depend on fleet growth.

The Distributed Wind Cost Taxonomy

Energy Technology Data Exchange (ETDEWEB)

Forsyth, Trudy; Jimenez, Tony; Preus, Robert; Tegen, Suzanne; Baring-Gould, Ian

2017-03-28

To date, there has been no standard method or tool to analyze the installed and operational costs for distributed wind turbine systems. This report describes the development of a classification system, or taxonomy, for distributed wind turbine project costs. The taxonomy establishes a framework to help collect, sort, and compare distributed wind cost data that mirrors how the industry categorizes information. The taxonomy organizes costs so they can be aggregated from installers, developers, vendors, and other sources without losing cost details. Developing a peer-reviewed taxonomy is valuable to industry stakeholders because a common understanding the details of distributed wind turbine costs and balance of station costs is a first step to identifying potential high-value cost reduction opportunities. Addressing cost reduction potential can help increase distributed wind's competitiveness and propel the U.S. distributed wind industry forward. The taxonomy can also be used to perform cost comparisons between technologies and track trends for distributed wind industry costs in the future. As an initial application and piloting of the taxonomy, preliminary cost data were collected for projects of different sizes and from different regions across the contiguous United States. Following the methods described in this report, these data are placed into the established cost categories.

Cost Optimization of Product Families using Analytic Cost Models

DEFF Research Database (Denmark)

Brunø, Thomas Ditlev; Nielsen, Peter

2012-01-01

This paper presents a new method for analysing the cost structure of a mass customized product family. The method uses linear regression and backwards selection to reduce the complexity of a data set describing a number of historical product configurations and incurred costs. By reducing the data...... set, the configuration variables which best describe the variation in product costs are identified. The method is tested using data from a Danish manufacturing company and the results indicate that the method is able to identify the most critical configuration variables. The method can be applied...... in product family redesign projects focusing on cost reduction to identify which modules contribute the most to cost variation and should thus be optimized....

Global tree network for computing structures enabling global processing operations

Science.gov (United States)

Blumrich; Matthias A.; Chen, Dong; Coteus, Paul W.; Gara, Alan G.; Giampapa, Mark E.; Heidelberger, Philip; Hoenicke, Dirk; Steinmacher-Burow, Burkhard D.; Takken, Todd E.; Vranas, Pavlos M.

2010-01-19

A system and method for enabling high-speed, low-latency global tree network communications among processing nodes interconnected according to a tree network structure. The global tree network enables collective reduction operations to be performed during parallel algorithm operations executing in a computer structure having a plurality of the interconnected processing nodes. Router devices are included that interconnect the nodes of the tree via links to facilitate performance of low-latency global processing operations at nodes of the virtual tree and sub-tree structures. The global operations performed include one or more of: broadcast operations downstream from a root node to leaf nodes of a virtual tree, reduction operations upstream from leaf nodes to the root node in the virtual tree, and point-to-point message passing from any node to the root node. The global tree network is configurable to provide global barrier and interrupt functionality in asynchronous or synchronized manner, and, is physically and logically partitionable.

Fog-Assisted Operational Cost Reduction for Cloud Data Centers

OpenAIRE

Yu, Liang; Jiang, Tao; Zou, Yulong

2017-01-01

In this paper, we intend to reduce the operational cost of cloud data centers with the help of fog devices, which can avoid the revenue loss due to wide-area network propagation delay and save network bandwidth cost by serving nearby cloud users. Since fog devices may not be owned by a cloud service provider, they should be compensated for serving the requests of cloud users. When taking economical compensation into consideration, the optimal number of requests processed locally by each fog d...

Update on Risk Reduction Activities for a Liquid Advanced Booster for NASA's Space Launch System

Science.gov (United States)

Crocker, Andrew M.; Greene, William D.

2017-01-01

The stated goals of NASA's Research Announcement for the Space Launch System (SLS) Advanced Booster Engineering Demonstration and/or Risk Reduction (ABEDRR) are to reduce risks leading to an affordable Advanced Booster that meets the evolved capabilities of SLS and enable competition by mitigating targeted Advanced Booster risks to enhance SLS affordability. Dynetics, Inc. and Aerojet Rocketdyne (AR) formed a team to offer a wide-ranging set of risk reduction activities and full-scale, system-level demonstrations that support NASA's ABEDRR goals. During the ABEDRR effort, the Dynetics Team has modified flight-proven Apollo-Saturn F-1 engine components and subsystems to improve affordability and reliability (e.g., reduce parts counts, touch labor, or use lower cost manufacturing processes and materials). The team has built hardware to validate production costs and completed tests to demonstrate it can meet performance requirements. State-of-the-art manufacturing and processing techniques have been applied to the heritage F-1, resulting in a low recurring cost engine while retaining the benefits of Apollo-era experience. NASA test facilities have been used to perform low-cost risk-reduction engine testing. In early 2014, NASA and the Dynetics Team agreed to move additional large liquid oxygen/kerosene engine work under Dynetics' ABEDRR contract. Also led by AR, the objectives of this work are to demonstrate combustion stability and measure performance of a 500,000 lbf class Oxidizer-Rich Staged Combustion (ORSC) cycle main injector. A trade study was completed to investigate the feasibility, cost effectiveness, and technical maturity of a domestically-produced engine that could potentially both replace the RD-180 on Atlas V and satisfy NASA SLS payload-to-orbit requirements via an advanced booster application. Engine physical dimensions and performance parameters resulting from this study provide the system level requirements for the ORSC risk reduction test article

Potential vehicle fleet CO2 reductions and cost implications for various vehicle technology deployment scenarios in Europe

International Nuclear Information System (INIS)

Pasaoglu, Guzay; Honselaar, Michel; Thiel, Christian

2012-01-01

The continuous rise in demand for road transportation has a significant effect on Europe's oil dependency and emissions of greenhouse gases. Alternative fuels and vehicle technology can mitigate these effects. This study analyses power-train deployment scenarios for passenger cars and light commercial vehicles in EU-27 until 2050. It considers European policy developments on vehicle CO 2 emissions, bio-energy mandates and reductions in the CO 2 footprint of the European energy mix and translates these into comprehensive scenarios for the road transport sector. It quantifies and assesses the potential impact of these scenarios on well-to-wheel (WtW) CO 2 emission reductions primary energy demand evolution, and cost aspects for the prospective vehicle owners. The study reveals that, under the deployed scenarios, the use of bio-fuel blends, technological learning and the deployment of hybrids, battery electric, plug-in hybrid and fuel cell vehicles can decrease WtW CO 2 emissions in EU-27 passenger road transport by 35–57% (compared to 2010 levels) and primary energy demand by 29–51 Mtoe as they would benefit from a future assumed decarbonised electricity and hydrogen mix in Europe. Learning effects can lead to acceptable payback periods for vehicle owners of electric drive vehicles. - Highlights: ► Power-train penetration scenarios for 2010–2050 passenger road transport in Europe. ► A dedicated tool is developed to analyse H 2 production and distribution mix till 2050. ► Alternative vehicles can drastically reduce CO 2 emissions and energy demand. ► Electric vehicles could become cost competitive to conventional vehicles by 2030. ► Policies needed to create adequate momentum and guarantee decarbonised transport.

Documentation for calculating CO{sub 2} reduction costs of using bio diesel; Dokumentation for beregning af CO{sub 2}-reduktionsomkostningen ved anvendelse af biodiesel

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-01-01

In connection to the European Commission's proposal for a directive on the promotion of biofuels for transport and the new climate strategy for Denmark, the Danish Energy Authority has evaluated the potential for and economics of production of biodiesel in Denmark. This note is documentation for the Danish Energy Authority's socio-economic analysis regarding rape-based biodiesel. The analysis consists of two parts: 1. Costs of producing biodiesel, 2. Costs of cultivating rape. The main conclusion is that the socio-economic CO{sub 2} reduction costs of producing biodiesel in Denmark are subject to some uncertainty. The uncertainty is primarily linked to difficulty in determining central parameters, e.g. stating the socio-economic costs of producing rape-seed, including stating prices of production factors and by-products. (ba)

REDUCTION OF COST AND TIME CONSUMPTION IN WELL-CONSTRUCTION

Directory of Open Access Journals (Sweden)

Mladen Zelenika

1998-12-01

Full Text Available A Contractor usually utilizes the available drilling equipment when constructing just one single well. Drilling cost and time consumption in constructing the well MB-1, using the percussion method, and the well MB-2, using the conventional rotary drilling method, call for a separate analysis in order to justify the investment cost for the acquisition of additional equipment for a single well only. The wells, located in a karst vrtača close to an estavelle near Tomislavgrad, with a diameter of 500 mm and approximately 80 m deep, have been accomplished with a low rate of penetration using the conventional Cable tool and resp. Rotary Drilling Method. In this paper results of analyses for the given circumstances are shown: both the efficiency and cost of the mentioned drilling methods performed by the crews of »Geotehnika d.d.« Zagreb, as well as the justifiability of investments in new equipment are evaluated.