Exposure of ELF-EMF and RF-EMF Increase the Rate of Glucose Transport and TCA Cycle in Budding Yeast.

Science.gov (United States)

Lin, Kang-Wei; Yang, Chuan-Jun; Lian, Hui-Yong; Cai, Peng

2016-01-01

In this study, we investigated the transcriptional response to 50 Hz extremely low frequency electromagnetic field (ELF-EMF) and 2.0 GHz radio frequency electromagnetic field (RF-EMF) exposure by Illumina sequencing technology using budding yeast as the model organism. The transcription levels of 28 genes were upregulated and those of four genes were downregulated under ELF-EMF exposure, while the transcription levels of 29 genes were upregulated and those of 24 genes were downregulated under RF-EMF exposure. After validation by reverse transcription quantitative polymerase chain reaction (RT-qPCR), a concordant direction of change both in differential gene expression (DGE) and RT-qPCR was demonstrated for nine genes under ELF-EMF exposure and for 10 genes under RF-EMF exposure. The RT-qPCR results revealed that ELF-EMF and RF-EMF exposure can upregulate the expression of genes involved in glucose transportation and the tricarboxylic acid (TCA) cycle, but not the glycolysis pathway. Energy metabolism is closely related with the cell response to environmental stress including EMF exposure. Our findings may throw light on the mechanism underlying the biological effects of EMF.

Two-way portable radios: monitoring exposure to EMF

International Nuclear Information System (INIS)

Aguiar Campos, Maria C.

2008-01-01

Full text: Hand-held two-way portable radios, also known as push-to-talk radios (PTT), radiate intense electromagnetic fields (EMF). Increasingly used for communications inside buildings, these devices should not be neglected as EMF sources in workplace environments. In contrast to mobile-phones, push-to-talk radios usually operate in a lower frequency range (450 < f < 470 MHz), where the reference levels, established by ICNIRP for human exposure, are more restrictive. The intrinsic hazard potential associated to these devices has motivated this assessment of occupational exposure to EMF. In spite of relatively low power levels, usually no more than a few watts, and the intermittency of transmissions, push-to-talk radios are operated close to the body, therefore exposure takes place in the near-field region. Measurements of electromagnetic field intensities were carried out for two push-to-talk models, operating at power levels of 2 W and 5 W, with a broad-band field monitor, EMR-300 (W and G), coupled to an E-field triaxial probe (type 8.0). Intensities were measured at various points surrounding the transmitter, to assess exposure levels of other workers sitting nearby during communications. Results show significant electric field intensities at points less than 10 cm away from the source. A personal monitor with triaxial E and H-field shaped probes, RadMan XT (Narda), was used as a dosimeter by workers operating both radio models, during 8 hours. This device measures E and H-field intensities and stores these values as a percentage of ICNIRP occupational limits, in a data logger. Results of both kind of measurements show that intense EMF are emitted during transmissions. Therefore, workers should be informed about possible EMF hazards and trained to properly operate these transmitters, in order to minimize exposure risks. (author)

EMF and risk perception

International Nuclear Information System (INIS)

Widemann, P.M.; Schuetz, H.

1995-01-01

There has lately been a greater responsivement in the media as well as the general public to the risk potential of high-frequency electromagnetic fields (EMF). If the discussion continues to gain momentum, this could have grave consequences for companies offering the products or services under attack. The working group Man, Environment, Technology (MUT) at Juelich Research Centre has examined the question of how EMF risks are valuated by the public. The study centered on the following questions: How are EMF risk potentials perceived by the public and what factors influence the public discussion? What future course might the discussion on risks take and what critical events and conditions deserve particular attention? The authors present and discuss the results of this first German study on product-inherent risks. (orig.) [de

Artificial neural networks to estimate the EMF ELF on car travelling near power transmission line

Energy Technology Data Exchange (ETDEWEB)

Al-Sayegh, O.A.; Qabazard, A.M. [Kuwait Inst. for Scientific Research, Safat (Kuwait). advanced Systems Division of Environment and Urban

2007-07-01

An artificial neural network (ANN) was developed to determine the electromagnetic field (EMF) and extremely low frequency (ELF) intensity on a vehicle body at different distances from a high tension power line and at varying power loads. EMF radiated emissions from ELF source power transmission lines can produce interference in the electric components in vehicles traveling at variable speed near the power lines. The passengers in the vehicle may also experience EMF-related health problems. Although EMF has been recently categorized as a new form of pollution, the situation has been largely ignored by the industry. Typically, electromagnetic fields at different frequencies show the fastest growing environmental influences. All populations are now exposed to varying degrees of EMF and the levels will continue to increase as technology advances. The purpose of this work was to promote discussion and help find design solutions to manufacture a new device for measuring the EMF at variable speed. In this study, a set of near field measurements outside the vehicle were used to train ANN. Estimations of the EMF ELF for various distances from the high tension power line were presented. It was determined that the most important factors affecting the electric field model include exposure conditions; size, shape and position of the exposed body in the field; and, surface charge density. The EMF ELF was found to increase near sagging areas of the overhead power transmission line. The EMF ELF was found to be proportional to the total amps flowing through the line at the time of measurement. 14 refs., 3 figs.

EMFs run aground

International Nuclear Information System (INIS)

Raloff, J.

1993-01-01

Presently no one knows whether electromagnetic fields (EMFs) play a role in human cancer or other ailments, though epidemiological studies over the years have suggested that possibility. A study by the Electric Power Research Institute attempted to quantify everything it could about the magnetic environment of a home, identifying not only major sources of magnetic fields, but also their frequencies, strengths, and how they fall off with distance. Sources of a homes magnetic environment include appliances, overhead powerlines, and grounding connections to metallic water pipes. Fields will vary over time, depending on how much current is passing through the electrically conductive sources. Additional contributors to a home's magnetic background may include unusual wiring in the walls, underground power lines, and near-by high voltage transmission lines. This paper summarizes the study results, indicating weak, persistant EMFs may dominate, but small magnetic field associated with ground currents can end up contributing more to the overall EMF background than appliances producing far larger fields which fall off more quickly with distance. 2 figs

Idiopathic environmental intolerance attributed to electromagnetic fields (IEI-EMF: A systematic review of identifying criteria

Directory of Open Access Journals (Sweden)

Baliatsas Christos

2012-08-01

Full Text Available Abstract Background Idiopathic environmental intolerance attributed to electromagnetic fields (IEI-EMF remains a complex and unclear phenomenon, often characterized by the report of various, non-specific physical symptoms (NSPS when an EMF source is present or perceived by the individual. The lack of validated criteria for defining and assessing IEI-EMF affects the quality of the relevant research, hindering not only the comparison or integration of study findings, but also the identification and management of patients by health care providers. The objective of this review was to evaluate and summarize the criteria that previous studies employed to identify IEI-EMF participants. Methods An extensive literature search was performed for studies published up to June 2011. We searched EMBASE, Medline, Psychinfo, Scopus and Web of Science. Additionally, citation analyses were performed for key papers, reference sections of relevant papers were searched, conference proceedings were examined and a literature database held by the Mobile Phones Research Unit of King’s College London was reviewed. Results Sixty-three studies were included. “Hypersensitivity to EMF” was the most frequently used descriptive term. Despite heterogeneity, the criteria predominantly used to identify IEI-EMF individuals were: 1. Self-report of being (hypersensitive to EMF. 2. Attribution of NSPS to at least one EMF source. 3. Absence of medical or psychiatric/psychological disorder capable of accounting for these symptoms 4. Symptoms should occur soon (up to 24 hours after the individual perceives an exposure source or exposed area. (Hypersensitivity to EMF was either generalized (attribution to various EMF sources or source-specific. Experimental studies used a larger number of criteria than those of observational design and performed more frequently a medical examination or interview as prerequisite for inclusion. Conclusions Considerable heterogeneity exists in the

monIT: A Portuguese Risk Communication Project on EMF

International Nuclear Information System (INIS)

Oliveira, Carla; Sebastiao, Daniel; Carpinteiro, Goncalo; Fernandes, Carlos A.; Correia, Luis M.

2006-01-01

The monIT project is a risk communication programme, aiming at providing information on exposure to electromagnetic fields (EMF) from mobile communication systems in Portugal. monIT's website, www.lxlit.pt/monit, is the main interface for dissemination of information. Besides including relevant information about EMF for both the general public and the technical community, this website provides results from extensive measurement campaigns performed all over Portugal during the last three years. This paper presents the project's structure and activities, practical results achieved and ends with some conclusions and action lines for future work. (author)

Exposure Knowledge and Risk Perception of RF EMF

Science.gov (United States)

Freudenstein, Frederik; Wiedemann, Peter M.; Varsier, Nadège

2015-01-01

The presented study is part of the EU-Project Low EMF Exposure Future Networks (LEXNET), which deals among other things with the issue of whether a reduction of the radiofrequency (RF) electro-magnetic fields (EMF) exposure will result in more acceptance of wireless communication networks in the public sphere. We assume that the effects of any reduction of EMF exposure will depend on the subjective link between exposure perception and risk perception (RP). Therefore we evaluated respondents’ RP of different RF EMF sources and their subjective knowledge about various exposure characteristics with regard to their impact on potential health risks. The results show that participants are more concerned about base stations than about all other RF EMF sources. Concerning the subjective exposure knowledge the results suggest that people have a quite appropriate impact model. The question how RF EMF RP is actually affected by the knowledge about the various exposure characteristics was tested in a linear regression analysis. The regression indicates that these features – except distance – do influence people’s general RF EMF RP. In addition, we analyzed the effect of the quality of exposure knowledge on RF EMF RP of various sources. The results show a tendency that better exposure knowledge leads to higher RP, especially for mobile phones. The study provides empirical support for models of the relationships between exposure perception and RP. It is not the aim to extrapolate these findings to the whole population because the samples are not exactly representative for the general public in the participating countries. PMID:25629026

Exposure knowledge and risk perception of RF EMF

Directory of Open Access Journals (Sweden)

Frederik eFreudenstein

2015-01-01

Full Text Available The presented study is part of the EU Project LEXNET (Low EMF Exposure Future Networks, which deals among other things with the issue of whether a reduction of the radiofrequency (RF electro-magnetic fields (EMF exposure will result in more acceptance of wireless communication networks in the public sphere.We assume that the effects of any reduction of EMF exposure will depend on the subjective link between exposure perception and risk perception. Therefore we evaluated respondents’ risk perceptions of different RF EMF sources and their subjective knowledge about various exposure characteristics with regard to their impact on potential health risks. The results show that participants are more concerned about base stations than about all other RF EMF sources. Concerning the subjective exposure knowledge the results suggest that people have a quite appropriate impact model. The question how RF EMF risk perception is actually affected by the knowledge about the various exposure characteristics was tested in a linear regression analysis. The regression indicates that these features - except distance - do influence people’s general RF EMF risk perceptions. In addition, we analyzed the effect of the quality of exposure knowledge on RF EMF risk perception of various sources. The results show a tendency that better exposure knowledge leads to higher risk perception, especially for mobile phones. The study provides empirical support for models of the relationships between exposure perception and risk perception. It is not the aim to extrapolate these findings to the whole population because the samples are not exactly representative for the general public in the participating countries.

Newly developed EMF cell with zirconia solid electrolyte for measurement of low oxygen potentials in liquid Cu-Cr and Cu-Zr alloys

Directory of Open Access Journals (Sweden)

Katayama I.

2012-01-01

Full Text Available In order to measure the very low oxygen potential by use of stabilized zirconia solid electrolyte emf method, a new cell construction was devised. The idea was based on Janke but a zirconia rod was used instead of the zirconia crucible which contacts liquid alloy electrode. The cell was used for determination of the oxygen potentials in liquid dilute Cu-Cr and Cu-Zr alloys. The reference electrode was Cr,Cr2O3. Emf measurements were performed in the temperature range of 1400-1580K and composition range of 0.198-3.10at%Cr-Cu alloys, and 1380-1465K, 0.085-0.761at%Zr-Cu alloys. The composition of liquid alloys were determined by picking up from the liquid alloys and ICP analysis. By use of the newly devised cell construction in this study, stable emf values were obtained at each temperature and alloy composition. Emf values were corrected by using the parameter for electronic contribution of the YSZ. Activity of Cr obeys Henry’s law and activity coefficient at infinitely dilute alloys of Cr in Cu-Cr alloys are: lng0 Cr =(3.80 at 1423K, (3.57 at 1473K, (3.38 at 1523K and (3.20 at 1573K. At 1423 K activity coefficient of Zr at infinitely diluted alloy is lnγo Zr = -4.0.

radio frequency emf radio frequency emf exposure due to gsm

African Journals Online (AJOL)

eobe

about electromagnetic field (EMF) radiation from base. Nigerian Journal of ... oscillate in phase perpendicular to each other as shown in ... and magnetic) is produced by a change in the other part and the ... limit). 4. MATERIALS AND METHOD.

Electron thermal EMF for NaxCu2-xS

Directory of Open Access Journals (Sweden)

Kuterbekov Kairat

2017-01-01

Full Text Available In the present study, the temperature dependences of the thermoelectromotive force (thermo–emf in copper selenide, substituted in a small concentration, were studied. The results of the measurements showed that the thermo–emf coefficient of the samples increases, and the conductivity decreases with increasing silver concentration in its composition. These results allow – with optimal selection of the doping regime and protective coatings – to develop on the basis of nanostructured copper selenide an effective thermoelectric for use at temperatures of 20–500°C as p–type semiconductors suitable for increasing the efficiency of thermoelectric generators.

EVALUATION OF EMF EXPOSURE OF MOBILE PHONES ON HUMAN HEAD

Directory of Open Access Journals (Sweden)

N. I. Vtornikova

2017-01-01

Full Text Available Introduction. Mobile phones are worldwide spread nowadays. Smartphones penetration is growing year after year. Numerous studies indicate the negative effect of EMF exposure of these devices on humans. Therefore, it is important to study the peculiarities of their influence on the target organ-the brain. It is important for solving this problem to find out the real situation of the distribution of energy flux density (EFD of EMF exposure near the front panel of the apparatus.The aim of the study is to determine and compare EMF exposure from smartphones and classic mobile phones on human head.Material and methods. The original method patented in the Russian Federation was used in this study. The used original measuring setup is also patented, developed and assembled by the authors of the study. The object of the study was classical mobile phones and smartphones widespread at the time of work.Results. We got the graphic of matrices of distribution of energy flux density (EFD of EMF exposure in the plane against the front panel of 10 apparatus corresponding to the topography of a human head. The study revealed peculiarities of this distribution in smartphones and the classic mobile phones and got the values of energy flux density (EFD of EMF exposure in the investigated devices acting primarily on the brain.Conclusions. The design of smartphones and mobile phones determines the overall picture of distribution of EFD of EMF exposure in the plane against the front panel for devices of a particular type. This picture must be taken into account when planning epidemiological and experimental studies to obtain comparable results. Progress in the development of mobile communication technologies has led to an increase in the electromagnetic load on users of modern devices.

Thermodynamic properties of liquid silver-antimony alloys determined from emf measurements

International Nuclear Information System (INIS)

Krzyzak, Agnieszka; Fitzner, Krzysztof

2004-01-01

The thermodynamic properties of the liquid Ag-Sb alloys were determined using solid oxide galvanic cells with zirconia electrolyte. The emfs of the cells:Ag x Sb (1-x), Sb 2 O 3 /O 2- /airwere measured in the temperatures range 950-1100K in the whole range of the alloy compositions.First, the Gibbs free energy of formation of liquid Sb 2 O 3 from pure elements was derived:ΔG o f(Sb2O3) (J/mol)=-687100+243.23T.Next, the activities of antimony were measured as a function of the alloy compositions, x. Redlich-Kister polynomial expansion was used to describe the thermodynamic properties of the liquid phase. From the model equations the limiting value of the logarithm of activity coefficient of antimony in silver was obtained as a function of temperature:lnγ Sb 0 =-3812.5/T+0.4112.The obtained results were compared with the experimental values reported in the literature

EMF Monitoring—Concepts, Activities, Gaps and Options

Directory of Open Access Journals (Sweden)

Gregor Dürrenberger

2014-09-01

Full Text Available Exposure to electromagnetic fields (EMF is a cause of concern for many people. The topic will likely remain for the foreseeable future on the scientific and political agenda, since emissions continue to change in characteristics and levels due to new infrastructure deployments, smart environments and novel wireless devices. Until now, systematic and coordinated efforts to monitor EMF exposure are rare. Furthermore, virtually nothing is known about personal exposure levels. This lack of knowledge is detrimental for any evidence-based risk, exposure and health policy, management and communication. The main objective of the paper is to review the current state of EMF exposure monitoring activities in Europe, to comment on the scientific challenges and deficiencies, and to describe appropriate strategies and tools for EMF exposure assessment and monitoring to be used to support epidemiological health research and to help policy makers, administrators, industry and consumer representatives to base their decisions and communication activities on facts and data.

Environmental Field Surveys, EMF Rapid Program, Engineering Project No.3

Energy Technology Data Exchange (ETDEWEB)

Enertech Consultants

1996-04-01

The EMF Research and Public Information Dissemination Program (RAPID) includes several engineering research in the area of exposure assessment and source characterization. RAPID engineering project No. 3: ''Environmental Field Surveys'' was performed to obtain information on the levels and characteristics of different environments, for which only limited data were available, especially in comparison to magnetic field data for the residential environment and for electric utility facilities, such as power lines and substations. This project was also to provide information on the contribution of various field sources in the surveyed environments. Magnetic field surveys were performed at four sites for each of five environments: schools, hospitals, office buildings, machine shops, and grocery stores. Of the twenty sites surveyed, 11 were located in the San Francisco Bay Area and 9 in Massachusetts. The surveys used a protocol based on magnetic field measurements and observation of activity patterns, designed to provide estimates of magnetic field exposure by type of people and by type of sources. The magnetic field surveys conducted by this project produced a large amount of data which will form a part of the EMF measurement database Field and exposure data were obtained separately for ''area exposure'' and ''at exposure points''. An exposure point is a location where persons engage in fixed, site specific activities near a local source that creates a significant increase in the area field. The area field is produced by ''area sources'', whose location and field distribution is in general not related to the location of the people in the area.

Study of extremely low frequency electromagnetic field (ELF EMF) radiation produced by consumer products

International Nuclear Information System (INIS)

Roha Tukimin; Ahmad Fazli Ahmad Sanusi; Rozaimah Abd Rahim; Mohd Yusof Mohd Ali; Mohamad Amirul Nizam Mohamad Thari

2006-01-01

Extremely low frequency electromagnetic field ( ELF EMF) radiation falls under category of non-ionising radiation (NIR).ELF EMF consists of electric and magnetic fields. Excessive exposure to ELF EMF radiation may cause biological and health effects to human beings such as behavioral changes, stochastic and as initiator of cancer. In daily life, the main source of extremely low frequency electromagnetic radiation are consumer products in our home and office. Due to its ability to cause hazard, a study of ELF EMF radiation produced by consumer product was conducted. For this preliminary study, sample of 20 types electrical appliances were selected. The measurement was covered electric and magnetic field strength produced by the sample. PMM model EHP50A were used for measurement and data analysis. The results were compared with the permissible limits recommended by International Commission of Non-Ionising Radiation Protection (ICNIRP) for members of public (1000 mGauss and 5000 V/m). The results showed that all tested sample produced magnetic and electric field but still under the permissible limit recommended by ICNIRP. Besides that we found that field strengths can be very high at closer distance to the sample. (Author)

Residential exposure from extremely low frequency electromagnetic field (ELF EMF) radiation

Science.gov (United States)

Parthasarathy, Shamesh Raj; Tukimin, Roha

2018-01-01

ELF EMF radiation have received considerable attention as a potential threat to the safety and health of people living in the vicinity of high voltage transmission lines, electric distribution substations, power stations and even in close proximity to electronics and electrical household appliances. The paper highlights the study on the ELF EMF safety assessment performed at residences comprising of an owner-occupied house, a completed vacant house and an under construction condominium. The objectives of this study were to determine the ELF EMF radiation exposure level from the high voltage transmission line, electric distribution substation, power station and electrical household appliances in the residences, and to assess the potential exposure received by the occupants at the assessed locations. The results were logged in the electric and magnetic field strength with the units of volt per meter (V/m) and miliGauss (mG) respectively. The instrument setup and measurement protocols during the assessment were adopted from standard measurement method and procedures stipulated under the Institute of Electrical and Electronics Engineers (IEEE) Standard. The results were compared with the standards recommended in the International Commission on Non-Ionizing Radiation Protection (ICNIRP) guidelines.

Thermo-emf of cermet films based on rare earth borides

International Nuclear Information System (INIS)

Islamgaliev, R.K.; Zyrin, A.V.; Shulishova, O.I.; Shcherbak, I.A

1987-01-01

Thermo-emf and electric conductivity of granulated films which contain a solid solution of europium and praseodymium borides Eu 0.5 Pr 0.5 B 6 as a conducting phase, and glass-crystal binder on the base of alummomagnesial fluosilicates as a dielectric phase are studied within the temperature range of 100-1100 K. Thermo-emf of films has a negative sign within the temperature range of 100-500 K and does not exceed 5 μkV/K according to the absolute value which is close to the value of the conducting phase thermo-emf. A negative sign and a small value of thermo-emf are indicative of the charge transfer in granulated films by electrons. Contribution of each of the components into the general thermo-emf is different at high temperatures in different temperature ranges and depends on the individual physico-chemical properties of the used materials

Analysis of influence on back-EMF based sensorless control of PMSM due to parameter variations and measurement errors

DEFF Research Database (Denmark)

Wang, Z.; Lu, K.; Ye, Y.

2011-01-01

To achieve better performance of sensorless control of PMSM, a precise and stable estimation of rotor position and speed is required. Several parameter uncertainties and variable measurement errors may lead to estimation error, such as resistance and inductance variations due to temperature...... and flux saturation, current and voltage errors due to measurement uncertainties, and signal delay caused by hardwares. This paper reveals some inherent principles for the performance of the back-EMF based sensorless algorithm embedded in a surface mounted PMSM system adapting vector control strategy...

The precautionary principle and EMF: from the theory to the practice

International Nuclear Information System (INIS)

Lambrozo, J.

2002-01-01

In 1992 the United Nations Declaration on the Environment stated that where there are threats of serious or irreversible damage, lack of full scientific certainty will not be used as a reason for postponing cost-effective measures to prevent environmental degradation. Since this interpretation has been reaffirmed within numerous framework conventions and national environment law in a number of countries has begun to incorporate it. The contents of the precautionary principle: There are in fact two completely different ideas about the principle: the absolute: the precautionary principle would aim to guarantee complete harmless. The aim is zero risk and even a minimal suspicion of risk should result in a moratorium or a definitive ban, the moderate: its implementation is subject to a scientifically credible statement of hypothetical risk. It also gives priority to positive measures particularly research to provide a better assessment of the risk. In every case, before any decision a statement of cost and of advantages should be drawn up. The concept of prudent avoidance introduced in 1989 by G. Morgan and adopted by some states (Sweden, Australia) seems to be a specific application of the precautionary principle to EMF, taking into account the cost of the policy. The EMF research: After more than 20 years of research (epidemiological residential and professional studies, in vitro studies and laboratory animal studies) the scientific uncertainty has been considerably reduced but the possibility of some adverse effects remains. This fact and the public concern about EMF (partly explained by the ubiquity of exposure) explain the temptations in applying the precautionary principle to the EMF issue

EMF 9 scenario design (EMF WP 9.4)

International Nuclear Information System (INIS)

Anon.

1989-01-01

This paper describes the specifications of the scenarios selected by the EMF 9 Working Group, which is focusing on North American natural gas markets. The four first-round scenarios include: (1) an upper oil price path, (2) a lower oil price path, (3) a lower resource base, and (4) a higher gas demand due to policies and technologies affecting the electric utility sector. Each scenario represents a combination of market and regulatory environments. For example, the upper oil price scenario combines an upper oil price trend with a reference set of resource and demand conditions and with a pro-competitive regulatory environment. This scenario also serves as a control case for comparing the other scenarios, which specify a change in one of the environments for oil prices, resources, or demand. The regulatory environment has been maintained constant across these first-round scenarios but may be changed depending upon the later recommendations of the regulatory policy and market structure study group. The next section describes the detailed specifications for modelers in simulating the upper oil price scenario. Guidance is offered for energy prices, economic activity, and resource base estimates. The next three sections describe the other three scenarios that involve changes in these inputs from their values in the upper oil price scenario. Special wellhead price assumptions for stand-alone supply models and plans for developing inputs for Canadian models are then discussed. The final section describes the output variables to be reported to the EMF staff for comparing model results

Evaluation of E.M.F. exposure from medical electrical equipment

Energy Technology Data Exchange (ETDEWEB)

Aniolczyk, H.; Mamrot, P.; Politanski, P. [Nofer Institute of Occupational Medicine, Lodz (Poland)

2006-07-01

he medical electric and electronic equipment, including electro surgical devices, short- and microwave diathermy units, and magnetic resonance imaging (MRI) systems, belong to the most hazardous sources of electromagnetic emissions. The electromagnetic emissions can interfere with emissions from other medical equipment located in the same facility (e.g. operation rooms) thus having impact on their work, but more importantly, they can be dangerous to patients, medical personnel operating them and other persons. In the present project, an assessment of E.M.F. intensity was performed for more than 2 000 electro surgical devices (330 khz, 440 khz and 1.76 MHz frequency ranges), 1 200 diathermy units and 45 MRI 0.2 - 1.5 T systems. E.M.F. exposure of medical staff was assessed based on respective national hygienic standards. The actual exposure levels were found to exceed the admissible values in Poland. The recorded E.M.F. intensities were compared with relevant Who and U E recommendations (e.g. I.C.N.I.R.P. guidelines, 1998, Directive 2004/40/E.C.). The findings revealed that for 18% of the devices examined, the E.M.F. was higher than the E.M.F. intensity values recommended by U E. (authors)

Evaluation of E.M.F. exposure from medical electrical equipment

International Nuclear Information System (INIS)

Aniolczyk, H.; Mamrot, P.; Politanski, P.

2006-01-01

he medical electric and electronic equipment, including electro surgical devices, short- and microwave diathermy units, and magnetic resonance imaging (MRI) systems, belong to the most hazardous sources of electromagnetic emissions. The electromagnetic emissions can interfere with emissions from other medical equipment located in the same facility (e.g. operation rooms) thus having impact on their work, but more importantly, they can be dangerous to patients, medical personnel operating them and other persons. In the present project, an assessment of E.M.F. intensity was performed for more than 2 000 electro surgical devices (330 khz, 440 khz and 1.76 MHz frequency ranges), 1 200 diathermy units and 45 MRI 0.2 - 1.5 T systems. E.M.F. exposure of medical staff was assessed based on respective national hygienic standards. The actual exposure levels were found to exceed the admissible values in Poland. The recorded E.M.F. intensities were compared with relevant Who and U E recommendations (e.g. I.C.N.I.R.P. guidelines, 1998, Directive 2004/40/E.C.). The findings revealed that for 18% of the devices examined, the E.M.F. was higher than the E.M.F. intensity values recommended by U E. (authors)

Relation of Giant Thermo-EMF, Magnetothermo-EMF, Magnetoresistance, and Magnetization to Magnetic Impurity States in Manganites Nd(1- x)Sr x MnO3 and Sm(1- x)Sr x MnO3

Science.gov (United States)

Koroleva, L. I.; Batashev, I. K.; Morozov, A. S.; Balbashov, A. M.; Szymczak, H.; Slawska-Waniew, A.

2018-02-01

Thermo-EMF, magnetothermo-EMF, magnetoresistance, and magnetization of single-crystal samples of Nd(1- x)Sr x MnO3 and Sm(1- x)Sr x MnO3 with 0 ≤ x ≤ 0.3 have been studied experimentally. A sharp increase in the thermo-EMF and giant magnetothermo-EMF and magnetoresistance has been observed near the Curie point T C in compounds with 0.15 ≤ x ≤ 0.3. At the same time, no peculiarities have been found in compositions with x = 0. Since compounds with x > 0 consist of ferromagnetic clusters of the ferron type that reside in an antiferromagnetic A-type matrix, this means that the sharp increase in the thermo-EMF near T C is caused by ferrons. Indeed, the disappearance of ferrons due to a magnetic field or heating above T C leads to an abrupt decrease in the thermo-EMF. Therefore, thermo-EMF in alloyed magnetic semiconductors has been determined by the impurity concentration and the sample volume.

Extremely low frequency electromagnetic field (ELF-EMF) reduces oxidative stress and improves functional and psychological status in ischemic stroke patients.

Science.gov (United States)

Cichoń, Natalia; Bijak, Michał; Miller, Elżbieta; Saluk, Joanna

2017-07-01

As a result of ischaemia/reperfusion, massive generation of reactive oxygen species occurs, followed by decreased activity of antioxidant enzymes. Extremely low frequency electromagnetic fields (ELF-EMF) can modulate oxidative stress, but there are no clinical antioxidant studies in brain stroke patients. The aim of our study was to investigate the effect of ELF-EMF on clinical and antioxidant status in post-stroke patients. Fifty-seven patients were divided into two groups: ELF-EMF and non-ELF-EMF. Both groups underwent the same 4-week rehabilitation program. Additionally, the ELF-EMF group was exposed to an ELF-EMF field of 40 Hz, 7 mT for 15 min/day for 4 weeks (5 days a week). The activity of catalase and superoxide dismutase was measured in hemolysates, and total antioxidant status (TAS) determined in plasma. Functional status was assessed before and after the series of treatments using Activities of Daily Living (ADL), Mini-Mental State Examination (MMSE), and Geriatric Depression Scale (GDS). Applied ELF-EMF significantly increased enzymatic antioxidant activity; however, TAS levels did not change in either group. Results show that ELF-EMF induced a significant improvement in functional (ADL) and mental (MMSE, GDS) status. Clinical parameters had positive correlation with the level of enzymatic antioxidant protection. Bioelectromagnetics. 38:386-396, 2017. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

DIRECT OBSERVATION OF THE TURBULENT emf AND TRANSPORT OF MAGNETIC FIELD IN A LIQUID SODIUM EXPERIMENT

Energy Technology Data Exchange (ETDEWEB)

Rahbarnia, Kian; Brown, Benjamin P.; Clark, Mike M.; Kaplan, Elliot J.; Nornberg, Mark D.; Rasmus, Alex M.; Taylor, Nicholas Zane; Forest, Cary B. [Department of Physics, University of Wisconsin-Madison, 1150 University Ave, Madison, WI 53706 (United States); Jenko, Frank; Limone, Angelo [Max-Planck-Institut fuer Plasmaphysik (IPP), EURATOM Association, D-85748 Garching (Germany); Pinton, Jean-Francois; Plihon, Nicolas; Verhille, Gautier, E-mail: kian.rahbarnia@ipp.mpg.de [Laboratoire de Physique de l' Ecole Normale Superieure de Lyon, CNRS and Universite de Lyon, F-69364 Lyon (France)

2012-11-10

For the first time, we have directly measured the transport of a vector magnetic field by isotropic turbulence in a high Reynolds number liquid metal flow. In analogy with direct measurements of the turbulent Reynolds stress (turbulent viscosity) that governs momentum transport, we have measured the turbulent electromotive force (emf) by simultaneously measuring three components of velocity and magnetic fields, and computed the correlations that lead to mean-field current generation. Furthermore, we show that this turbulent emf tends to oppose and cancel out the local current, acting to increase the effective resistivity of the medium, i.e., it acts as an enhanced magnetic diffusivity. This has important implications for turbulent transport in astrophysical objects, particularly in dynamos and accretion disks.

DIRECT OBSERVATION OF THE TURBULENT emf AND TRANSPORT OF MAGNETIC FIELD IN A LIQUID SODIUM EXPERIMENT

International Nuclear Information System (INIS)

Rahbarnia, Kian; Brown, Benjamin P.; Clark, Mike M.; Kaplan, Elliot J.; Nornberg, Mark D.; Rasmus, Alex M.; Taylor, Nicholas Zane; Forest, Cary B.; Jenko, Frank; Limone, Angelo; Pinton, Jean-François; Plihon, Nicolas; Verhille, Gautier

2012-01-01

For the first time, we have directly measured the transport of a vector magnetic field by isotropic turbulence in a high Reynolds number liquid metal flow. In analogy with direct measurements of the turbulent Reynolds stress (turbulent viscosity) that governs momentum transport, we have measured the turbulent electromotive force (emf) by simultaneously measuring three components of velocity and magnetic fields, and computed the correlations that lead to mean-field current generation. Furthermore, we show that this turbulent emf tends to oppose and cancel out the local current, acting to increase the effective resistivity of the medium, i.e., it acts as an enhanced magnetic diffusivity. This has important implications for turbulent transport in astrophysical objects, particularly in dynamos and accretion disks.

Use of C. Elegans as a model organism for sensing the effects of ELF-EMFs

Energy Technology Data Exchange (ETDEWEB)

Lacchini, A H; Everington, M L; Augousti, A T; Walker, A J [School of Life Sciences, Kingston University London (United Kingdom)

2007-07-15

For the past two decades, there have been concerns and controversy about the effects on human health of the increased exposure to extremely-low-frequency (ELF) electromagnetic fields (EMFs) resulting from electrification, in both residential and industrial settings. Several epidemiological studies have implicated ELF-EMFs averaging 0.4 {mu}mUTesla (T) or more in increased risk of cancer, especially childhood leukaemia [1,2]; there have also been many reports demonstrating effects of power-frequency EMFs on cells [outlined in 1,3]. Unfortunately, however, the precise mechanisms by which ELF-EMFs exert biological effects have proven difficult to define and results of various studies have often been hard to reproduce [1]. We believe that C. elegans offers an exciting opportunity to elucidate the effects of power-frequency EMFs on cell signalling pathways within the whole organism and are therefore investigating the effects of ELF-EMF exposure on MAPK signalling in intact worms and fertilized embryos. Through taking a targeted approach to studying the effects of ELF-EMF's on MAPK signalling in C. elegans we aim to gather data that is physiologically relevant. Presently, this research is at a preliminary stage of preparation, and more detailed results on the exposure of Caenorhabditis elegans to ELF-EMF radiation will be presented at the conference itself.

Thermodynamic and nonstoichiometric behavior of promising Hi-Tc cuprate systems via EMF measurements: a short review

International Nuclear Information System (INIS)

Tetenbaum, M.

1999-01-01

Electromotive force (EMF) measurements of oxygen fugacities as a function of stoichiometry have been made on the YBa 2 Cu 3 O x , GdBa 2 Cu 3 O x , NdBa 2 Cu 3 O x and bismuth cuprate systems in the temperature range ∼400-750 C by means of an oxygen titration technique with an yttria-stabilized zirconia electrolyte. The shapes of the 400 C isotherms as a function of oxygen stoichiometry for the Gd and Nd cuprate systems suggest the presence of miscibility gaps at values of x that are higher than those in the YBa 2 Cu 3 O x system. For a given oxygen stoichiometry, oxygen partial pressures above GdBa 2 Cu 3 O x and NdBa 2 Cu 3 O x are higher (above x=6.5) than that for the promising YBa 2 Cu 3 O x system. A thermodynamic assessment and intercomparison of our partial pressure measurements with the results of related measurements will be presented

Simulation study of induced EMFs and the suppression during SST-1 start-up

Energy Technology Data Exchange (ETDEWEB)

Jain, V., E-mail: vishal@ipr.res.in; Sharma, D.; Vardhrajulu, A.; Gupta, C.N.; Srinivasan, R.; Daniel, R.

2015-11-15

Highlights: • Induced EMFs study in PF coils during SST-1 start up using MATlab simulink. • Integration of wave shaping network to generate practical OT current profile. • This study would protect coil insulation with identifying RC circulating network. • Study of MOV technique for circulation of current through RC. - Abstract: Steady State Superconducting Tokamak (SST-1) comprises of various copper and superconducting coils for generating magnetic field for initiation, providing equilibrium and shaping of plasma in tokamak. In this paper, an attempt is made to study the induced EMF in superconducting poloidal field coils (PF coils) due to fast ramp down of current in ohmic transformer copper coils (OT coils) for SST-1 plasma initiation. The fast ramp down of current, from few kA to zero amperes in just 50–100 ms in OT coils, is required to achieve plasma breakdown and ramp up of plasma current in tokamak. However, it induces nearly 5 kV EMF in one of the SST-1 PF coils that can damage the coil insulation and also bias negatively the electronic switching of power supply. It is necessary to maintain induced EMF below 1 kV in all PF coils for safe operation of SST-1. The induced EMF up to 1 kV can be clamped without any need of protection and circulating current. If the induced EMF is in excess of 1 kV, then it has to allow the circulation of current through RC network for coil protection from overvoltage. These circulating currents in PF coils will affect the shaping of plasma. In this paper, the induced EMF in PF coils are simulated using MATlab simulink for a typical SST-1 current profile of OT coils. Further, this simulation study is used to design the protection system for PF coils. In this paper, the worst-case induced EMF scenario is considered by excluding the effect of passive elements like vacuum vessel and cryostat on mutual coupling parameters. However, the implementation of the EMF suppression scheme need more elaborated study with considering

Electromagnetic fields and the public: EMF standards and estimation of risk

Science.gov (United States)

Grigoriev, Yury

2010-04-01

Mobile communications are a relatively new and additional source of electromagnetic exposure for the population. Standard daily mobile-phone use is known to increase RF-EMF (radiofrequency electromagnetic field) exposure to the brains of users of all ages, whilst mobile-phone base stations, and base station units for cordless phones, can regularly increase the exposures of large numbers of the population to RF-EMF radiation in everyday life. The need to determine appropriate standards stipulating the maximum acceptable short-term and long-term RF-EMF levels encountered by the public, and set such levels as general guidelines, is of great importance in order to help preserve the general public's health and that of the next generation of humanity.

Electromagnetic fields and the public: EMF standards and estimation of risk

International Nuclear Information System (INIS)

Grigoriev, Yury

2010-01-01

Mobile communications are a relatively new and additional source of electromagnetic exposure for the population. Standard daily mobile-phone use is known to increase RF-EMF (radiofrequency electromagnetic field) exposure to the brains of users of all ages, whilst mobile-phone base stations, and base station units for cordless phones, can regularly increase the exposures of large numbers of the population to RF-EMF radiation in everyday life. The need to determine appropriate standards stipulating the maximum acceptable short-term and long-term RF-EMF levels encountered by the public, and set such levels as general guidelines, is of great importance in order to help preserve the general public's health and that of the next generation of humanity.

Thermodynamic behavior of high-Tc oxide systems via EMF and related measurements

International Nuclear Information System (INIS)

Tetenbaum, M.; Tumidajaski, P.; Bloom, I.D.; Brown, D.L.; Blander, M.

1991-01-01

EMF measurements of oxygen fugacities as a function of stoichiometry have been made in the YBa 2 Cu 3 O x , and NdBa 2 Cu 3 O x , and Nd 1.81 Ce 0.19 CuO x superconducting systems in the temperature range 400--750 degree C by means of an oxygen titration technique with an yttria-stabilized zirconia electrolyte. The object of our current measurements is to investigate the effect of ionic size of Y, Gd and Nd on the thermodynamic behavior and structural transition in the LnBa 2 Cu 3 O x system. The shape of the 400 degree C isotherm for NdBa 2 Cu 3 O x suggests the presence of a miscibility gap at lower temperatures, at values of x that are higher than those in the YBa 2 Cu 3 O x system. The locations of the miscibility gaps are consistent with the effects of ionic radii on the composition dependence of T c for these systems. Our results explain the two plateaus in measured value of T c as a function of composition for the YBa 2 Cu 3 O x system and appear to be consistent with the less pronounced T c plateaus found for the NdBa 2 Cu 3 O x system higher stoichiometry values. For a given oxygen stoichiometry, partial pressures of oxygen above NdBa 2 Cu 3 O x are higher than for the YBa 2 Cu 3 O x system in accord with calculated partial molar thermodynamic quantities. The results of limited measurements on the n-type (electron-doped) superconducting Nd 1.81 Ce 0.19 CuO x system will be presented. A thermodynamic assessment and intercomparison of our oxygen partial pressure measurements with the results of other measurements will be presented. 34 refs., 9 figs., 1 tab

Development of an RF-EMF Exposure Surrogate for Epidemiologic Research.

Science.gov (United States)

Roser, Katharina; Schoeni, Anna; Bürgi, Alfred; Röösli, Martin

2015-05-22

Exposure assessment is a crucial part in studying potential effects of RF-EMF. Using data from the HERMES study on adolescents, we developed an integrative exposure surrogate combining near-field and far-field RF-EMF exposure in a single brain and whole-body exposure measure. Contributions from far-field sources were modelled by propagation modelling and multivariable regression modelling using personal measurements. Contributions from near-field sources were assessed from both, questionnaires and mobile phone operator records. Mean cumulative brain and whole-body doses were 1559.7 mJ/kg and 339.9 mJ/kg per day, respectively. 98.4% of the brain dose originated from near-field sources, mainly from GSM mobile phone calls (93.1%) and from DECT phone calls (4.8%). Main contributors to the whole-body dose were GSM mobile phone calls (69.0%), use of computer, laptop and tablet connected to WLAN (12.2%) and data traffic on the mobile phone via WLAN (6.5%). The exposure from mobile phone base stations contributed 1.8% to the whole-body dose, while uplink exposure from other people's mobile phones contributed 3.6%. In conclusion, the proposed approach is considered useful to combine near-field and far-field exposure to an integrative exposure surrogate for exposure assessment in epidemiologic studies. However, substantial uncertainties remain about exposure contributions from various near-field and far-field sources.

Optimization of a therapeutic electromagnetic field (EMF) to retard breast cancer tumor growth and vascularity

OpenAIRE

Cameron, Ivan L; Markov, Marko S; Hardman, W Elaine

2014-01-01

Background This study provided additional data on the effects of a therapeutic electromagnetic field (EMF) device on growth and vascularization of murine 16/C mammary adenocarcinoma cells implanted in C3H/HeJ mice. Methods The therapeutic EMF device generated a defined 120 Hz semi sine wave pulse signal of variable intensity. Murine 16/C mammary adenocarcinoma tumor fragments were implanted subcutaneously between the scapulae of syngeneic C3H mice. Once the tumor grew to 100 mm3, daily EMF tr...

Development of an RF-EMF Exposure Surrogate for Epidemiologic Research

Directory of Open Access Journals (Sweden)

Katharina Roser

2015-05-01

Full Text Available Exposure assessment is a crucial part in studying potential effects of RF-EMF. Using data from the HERMES study on adolescents, we developed an integrative exposure surrogate combining near-field and far-field RF-EMF exposure in a single brain and whole-body exposure measure. Contributions from far-field sources were modelled by propagation modelling and multivariable regression modelling using personal measurements. Contributions from near-field sources were assessed from both, questionnaires and mobile phone operator records. Mean cumulative brain and whole-body doses were 1559.7 mJ/kg and 339.9 mJ/kg per day, respectively. 98.4% of the brain dose originated from near-field sources, mainly from GSM mobile phone calls (93.1% and from DECT phone calls (4.8%. Main contributors to the whole-body dose were GSM mobile phone calls (69.0%, use of computer, laptop and tablet connected to WLAN (12.2% and data traffic on the mobile phone via WLAN (6.5%. The exposure from mobile phone base stations contributed 1.8% to the whole-body dose, while uplink exposure from other people’s mobile phones contributed 3.6%. In conclusion, the proposed approach is considered useful to combine near-field and far-field exposure to an integrative exposure surrogate for exposure assessment in epidemiologic studies. However, substantial uncertainties remain about exposure contributions from various near-field and far-field sources.

Comprehensive personal RF-EMF exposure map and its potential use in epidemiological studies.

Science.gov (United States)

Gonzalez-Rubio, Jesus; Najera, Alberto; Arribas, Enrique

2016-08-01

In recent years, numerous epidemiological studies, which deal with the potential effects of mobile phone antennas on health, have almost exclusively focused on their distance to mobile phone base stations. Although it is known that this is not the best approach to the problem, this situation occurs due to the numerous difficulties when determining the personal exposure to the radiofrequency electromagnetic fields (RF-EMF). However, due to the rise of personal exposimeters, the evolution of spatial statistics, the development of geographical information systems and the use of powerful software, new alternatives are available to deal with these epidemiological studies and thus overcome the aforementioned difficulties. Using these tools, this paper presents a lattice map of personal RF-EMF exposure from exterior mobile phone base stations, covering the entire 110 administrative regions in the city of Albacete (Spain). For this purpose, we used a personal exposimeter, Satimo EME Spy 140 model, performing measurements every 4s The exposimeter was located inside the plastic basket of a bicycle, whose versatility permitted the access to all the zones of the city. Once the exposure map was prepared, its relation with the known antenna locations was studied. The 64 mobile telephone antennas of the city were also georeferenced; the randomness of both variables (exposure and antennas) were studied by means of the Moran's I test. Results showed that the distribution of the antennas follows a grouped pattern (pbased on the mean exposure values to RF-EMF in these sections. The displayed map would permit the execution of more accurate epidemiological studies, since it would be possible to compare the exposure measurements with the incidence data of a disease. Copyright © 2016 Elsevier Inc. All rights reserved.

RF-EMF exposure of fetus and mother during magnetic resonance imaging

Energy Technology Data Exchange (ETDEWEB)

Pediaditis, M; Leitgeb, N; Cech, R [Institute of Health Care Engineering with European Notified Body of Medical Devices, Graz University of Technology, Inffeldgasse 18, 8010 Graz (Austria)], E-mail: norbert.leitgeb@tugraz.at

2008-12-21

Magnetic resonance imaging (MRI) avoids risks of genetic damage but may be associated with excess heating of body tissues. To investigate the exposure to MRI radio-frequency (RF) electromagnetic fields (EMF), low-pass and high-pass birdcage coils were simulated and the whole-body pregnant woman model SILVY used to determine local and whole-body specific absorption rates (SAR) in mother and fetus. Resonant RF-EMF of MRI devices were investigated at 0.3, 1, 1.5, 2, 3 and 4 T. Results allow extrapolation also to higher fields. They showed that local SAR in mother's trunk reaches exposure limits first. However, data show that during abdominal MRI meeting exposure limits of the mother is not sufficient to protect the fetus if limits of the general populations are applied to it. In that case fetal whole-body SAR exceeds limits by 7.4-fold. It is up to the physician and/or the ethics commission to decide upon justification for abdominal MRI of pregnant women if limits are exceeded. The results indicate the need for specifically addressing fetal exposure to EMF and elaborating general recommendations by radiation protection bodies.

RF-EMF exposure of fetus and mother during magnetic resonance imaging

International Nuclear Information System (INIS)

Pediaditis, M; Leitgeb, N; Cech, R

2008-01-01

Magnetic resonance imaging (MRI) avoids risks of genetic damage but may be associated with excess heating of body tissues. To investigate the exposure to MRI radio-frequency (RF) electromagnetic fields (EMF), low-pass and high-pass birdcage coils were simulated and the whole-body pregnant woman model SILVY used to determine local and whole-body specific absorption rates (SAR) in mother and fetus. Resonant RF-EMF of MRI devices were investigated at 0.3, 1, 1.5, 2, 3 and 4 T. Results allow extrapolation also to higher fields. They showed that local SAR in mother's trunk reaches exposure limits first. However, data show that during abdominal MRI meeting exposure limits of the mother is not sufficient to protect the fetus if limits of the general populations are applied to it. In that case fetal whole-body SAR exceeds limits by 7.4-fold. It is up to the physician and/or the ethics commission to decide upon justification for abdominal MRI of pregnant women if limits are exceeded. The results indicate the need for specifically addressing fetal exposure to EMF and elaborating general recommendations by radiation protection bodies.

Review of Studies Concerning Electromagnetic Field (EMF Exposure Assessment in Europe: Low Frequency Fields (50 Hz–100 kHz

Directory of Open Access Journals (Sweden)

Peter Gajšek

2016-09-01

Full Text Available We aimed to review the findings of exposure assessment studies done in European countries on the exposure of the general public to low frequency electric and magnetic fields (EMFs of various frequencies. The study shows that outdoor average extremely low frequency magnetic fields (ELF-MF in public areas in urban environments range between 0.05 and 0.2 µT in terms of flux densities, but stronger values (of the order of a few µT may occur directly beneath high-voltage power lines, at the walls of transformer buildings, and at the boundary fences of substations. In the indoor environment, high values have been measured close to several domestic appliances (up to the mT range, some of which are held close to the body, e.g., hair dryers, electric shavers. Common sources of exposure to intermediate frequencies (IF include induction cookers, compact fluorescent lamps, inductive charging systems for electric cars and security or anti-theft devices. No systematic measurement surveys or personal exposimetry data for the IF range have been carried out and only a few reports on measurements of EMFs around such devices are mentioned. According to the available European exposure assessment studies, three population exposure categories were classified by the authors regarding the possible future risk analysis. This classification should be considered a crucial advancement for exposure assessment, which is a mandatory step in any future health risk assessment of EMFs exposure.

Review of Studies Concerning Electromagnetic Field (EMF) Exposure Assessment in Europe: Low Frequency Fields (50 Hz–100 kHz)

Science.gov (United States)

Gajšek, Peter; Ravazzani, Paolo; Grellier, James; Samaras, Theodoros; Bakos, József; Thuróczy, György

2016-01-01

We aimed to review the findings of exposure assessment studies done in European countries on the exposure of the general public to low frequency electric and magnetic fields (EMFs) of various frequencies. The study shows that outdoor average extremely low frequency magnetic fields (ELF-MF) in public areas in urban environments range between 0.05 and 0.2 µT in terms of flux densities, but stronger values (of the order of a few µT) may occur directly beneath high-voltage power lines, at the walls of transformer buildings, and at the boundary fences of substations. In the indoor environment, high values have been measured close to several domestic appliances (up to the mT range), some of which are held close to the body, e.g., hair dryers, electric shavers. Common sources of exposure to intermediate frequencies (IF) include induction cookers, compact fluorescent lamps, inductive charging systems for electric cars and security or anti-theft devices. No systematic measurement surveys or personal exposimetry data for the IF range have been carried out and only a few reports on measurements of EMFs around such devices are mentioned. According to the available European exposure assessment studies, three population exposure categories were classified by the authors regarding the possible future risk analysis. This classification should be considered a crucial advancement for exposure assessment, which is a mandatory step in any future health risk assessment of EMFs exposure. PMID:27598182

Electric shock and elevated EMF levels due to triplen harmonics

International Nuclear Information System (INIS)

Tran, T.Q.; Conrad, L.E.; Stallman, B.K.

1996-01-01

The increasing use of single phase rectifiers for electric power conversion in residential applications increases harmonic load on utility systems. Many papers have analyzed the effect of these loads on power quality and equipment loadability. However, there are two more critical concerns for harmonic loads served phase to neutral on multi-grounded wye systems. Triplen harmonics, particularly the third, add in the neutral and have little diversity between loads. The higher neutral currents may cause significant problems. Neutral to earth voltages will increase near the substations which could increase stray voltage complaints. The additional neutral current on three phase lines will elevate EMF levels especially in the fringe areas. This paper provides fundamental understanding of triplen harmonic influence on stray voltage and EMF related to multi-grounded wye electric distribution systems

Down-Regulation of OsEMF2b Caused Semi-sterility Due to Anther and Pollen Development Defects in Rice

Directory of Open Access Journals (Sweden)

Luchang Deng

2017-11-01

Full Text Available Anther and pollen development are crucial processes of plant male reproduction. Although a number of genes involved in these processes have been identified, the regulatory networks of pollen and anther development are still unclear. EMBRYONIC FLOWER 2b (OsEMF2b is important for rice development. Its biological function in floral organ, flowering time and meristem determinacy have been well-studied, but its role, if only, on male reproduction is still unknown, because null mutants of OsEMF2b barely have anthers. In this study, we identified a weak allele of OsEMF2b, osemf2b-4. The T-DNA insertion was located in the promoter region of OsEMF2b, and OsEMF2b expression was significantly decreased in osemf2b-4. The osemf2b-4 mutant exhibited much more normal anthers than null mutants of OsEMF2b, and also showed defective floret development similar to null mutants. Cytological analysis showed various defects of anther wall and pollen development in osemf2b-4, such as slightly or extremely enlarged tapetum, irregular or normal morphology microspores, and partial or complete sterility. OsEMF2b was highly expressed in tapetum and microspores, and the protein was localized in the nucleus. The expression of 15 genes essential for anther and pollen development was investigated in both WT and osemf2b-4. Fourteen genes including GAMYB was up-regulated, and only PTC1 was down-regulated in osemf2b-4. This suggests that up-regulated GAMYB and down-regulated PTC1 might contribute to the defective anther and pollen development in osemf2b-4. Overall, our work suggests that OsEMF2b plays an essential role during post-meiotic anther and pollen development.

[Polish guidelines of 2001 for maximum admissible intensities in high frequency EMF versus European Union recommendations].

Science.gov (United States)

Aniołczyk, Halina

2003-01-01

In 1999, a draft of amendments to maximum admissible intensities (MAI) of electromagnetic fields (0 Hz-300 GHz) was prepared by Professor H. Korniewicz of the Central Institute for Labour Protection, Warsaw, in cooperation with the Nofer Institute of Occupational Medicine, Łódź (radio- and microwaves) and the Military Institute of Hygiene and Epidemiology, Warsaw (pulse radiation). Before 2000, the development of the national MAI guidelines for the frequency range of 0.1 MHz-300 GHz was based on the knowledge of biological and health effects of EMF exposure available on the turn of the 1960s. A current basis for establishing the MAI international standards is a well-documented thermal effect measured by the value of a specific absorption rate (SAR), whereas the effects of resonant absorption imposes the nature of the functional dependency on EMF frequency. The Russian standards, already thoroughly analyzed, still take so-called non-thermal effects and the conception of energetic load for a work-shift with its progressive averaging (see hazardous zone in Polish guidelines) as a basis for setting maximum admissible intensities. The World Health Organization recommends a harmonization of the EMF protection guidelines, existing in different countries, with the guidelines of the International Commission for Non-Ionizing Radiation Protection (ICNIRP), and its position is supported by the European Union.

International policy and advisory response regarding children's exposure to radio frequency electromagnetic fields (RF-EMF).

Science.gov (United States)

Redmayne, Mary

2016-01-01

Radiofrequency electromagnetic field (RF-EMF) exposure regulations/guidelines generally only consider acute effects, and not chronic, low exposures. Concerns for children's exposure are warranted due to the amazingly rapid uptake of many wireless devices by increasingly younger children. This review of policy and advice regarding children's RF-EMF exposure draws material from a wide variety of sources focusing on the current situation. This is not a systematic review, but aims to provide a representative cross-section of policy and advisory responses within set boundaries. There are a wide variety of approaches which I have categorized and tabulated ranging from ICNIRP/IEEE guidelines and "no extra precautions needed" to precautionary or scientific much lower maxima and extensive advice to minimize RF-EMF exposure, ban advertising/sale to children, and add exposure information to packaging. Precautionary standards use what I term an exclusion principle. The wide range of policy approaches can be confusing for parents/carers of children. Some consensus among advisory organizations would be helpful acknowledging that, despite extensive research, the highly complex nature of both RF-EMF and the human body, and frequent technological updates, means simple assurance of long-term safety cannot be guaranteed. Therefore, minimum exposure of children to RF-EMF is recommended. This does not indicate need for alarm, but mirrors routine health-and-safety precautions. Simple steps are suggested. ICNIRP guidelines need to urgently publish how the head, torso, and limbs' exposure limits were calculated and what safety margin was applied since this exposure, especially to the abdomen, is now dominant in many children.

Effects of extremely low frequency electromagnetic field (ELF-EMF) on catalase, cytochrome P450 and nitric oxide synthase in erythro-leukemic cells.

Science.gov (United States)

Patruno, Antonia; Tabrez, Shams; Pesce, Mirko; Shakil, Shazi; Kamal, Mohammad A; Reale, Marcella

2015-01-15

Extremely low frequency electromagnetic fields (ELF-EMFs) are widely employed in electrical appliances and different equipment such as television sets, mobile phones, computers and microwaves. The molecular mechanism through which ELF-EMFs can influence cellular behavior is still unclear. A hypothesis is that ELF-EMFs could interfere with chemical reactions involving free radical production. Under physiologic conditions, cells maintain redox balance through production of ROS/RNS and antioxidant molecules. The altered balance between ROS generation and elimination plays a critical role in a variety of pathologic conditions including neurodegenerative diseases, aging and cancer. Actually, there is a disagreement as to whether there is a causal or coincidental relationship between ELF-EMF exposure and leukemia development. Increased ROS levels have been observed in several hematopoietic malignancies including acute and chronic myeloid leukemias. In our study, the effect of ELF-EMF exposure on catalase, cytochrome P450 and inducible nitric oxide synthase activity and their expression by Western blot analysis in myelogenous leukemia cell line K562 was evaluated. A significant modulation of iNOS, CAT and Cyt P450 protein expression was recorded as a result of ELF-EMF exposure in both phorbol 12-myristate 13-acetate (PMA)-stimulated and non-stimulated cell lines. Modulation in kinetic parameters of CAT, CYP-450 and iNOS enzymes in response to ELF-EMF indicates an interaction between the ELF-EMF and the enzymological system. These new insights might be important in establishing a mechanistic framework at the molecular level within which the possible effects of ELF-EMF on health can be understood. Copyright © 2014 Elsevier Inc. All rights reserved.

Radio-frequency electromagnetic field (RF-EMF) exposure levels in different European outdoor urban environments in comparison with regulatory limits.

Science.gov (United States)

Urbinello, Damiano; Joseph, Wout; Huss, Anke; Verloock, Leen; Beekhuizen, Johan; Vermeulen, Roel; Martens, Luc; Röösli, Martin

2014-07-01

Concerns of the general public about potential adverse health effects caused by radio-frequency electromagnetic fields (RF-EMFs) led authorities to introduce precautionary exposure limits, which vary considerably between regions. It may be speculated that precautionary limits affect the base station network in a manner that mean population exposure unintentionally increases. The objectives of this multicentre study were to compare mean exposure levels in outdoor areas across four different European cities and to compare with regulatory RF-EMF exposure levels in the corresponding areas. We performed measurements in the cities of Amsterdam (the Netherlands, regulatory limits for mobile phone base station frequency bands: 41-61 V/m), Basel (Switzerland, 4-6 V/m), Ghent (Belgium, 3-4.5 V/m) and Brussels (Belgium, 2.9-4.3 V/m) using a portable measurement device. Measurements were conducted in three different types of outdoor areas (central and non-central residential areas and downtown), between 2011 and 2012 at 12 different days. On each day, measurements were taken every 4s for approximately 15 to 30 min per area. Measurements per urban environment were repeated 12 times during 1 year. Arithmetic mean values for mobile phone base station exposure ranged between 0.22 V/m (Basel) and 0.41 V/m (Amsterdam) in all outdoor areas combined. The 95th percentile for total RF-EMF exposure varied between 0.46 V/m (Basel) and 0.82 V/m (Amsterdam) and the 99th percentile between 0.81 V/m (Basel) and 1.20 V/m (Brussels). All exposure levels were far below international reference levels proposed by ICNIRP (International Commission on Non-Ionizing Radiation Protection). Our study did not find indications that lowering the regulatory limit results in higher mobile phone base station exposure levels. Copyright © 2014 Elsevier Ltd. All rights reserved.

Five years later: the current status of the use of proteomics and transcriptomics in EMF research.

Science.gov (United States)

Leszczynski, Dariusz; de Pomerai, David; Koczan, Dirk; Stoll, Dieter; Franke, Helmut; Albar, Juan Pablo

2012-08-01

The World Health Organization's and Radiation and Nuclear Safety Authority's "Workshop on Application of Proteomics and Transcriptomics in Electromagnetic Fields Research" was held in Helsinki in the October/November 2005. As a consequence of this meeting, Proteomics journal published in 2006 a special issue "Application of Proteomics and Transcriptomics in EMF Research" (Vol. 6 No. 17; Guest Editor: D. Leszczynski). This Proteomics issue presented the status of research, of the effects of electromagnetic fields (EMF) using proteomics and transcriptomics methods, present in 2005. The current overview/opinion article presents the status of research in this area by reviewing all studies that were published by the end of 2010. The review work was a part of the European Cooperation in the Field of Scientific and Technical Research (COST) Action BM0704 that created a structure in which researchers in the field of EMF and health shared knowledge and information. The review was prepared by the members of the COST Action BM0704 task group on the high-throughput screening techniques and electromagnetic fields (TG-HTST-EMF). © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

New bimetallic EMF cell shows promise in direct energy conversion

Science.gov (United States)

Hesson, J. C.; Shimotake, H.

1968-01-01

Concentration cell, based upon a thermally regenerative cell principle, produces electrical energy from any large heat source. This experimental bimetallic EMF cell uses a sodium-bismuth alloy cathode and a pure liquid sodium anode. The cell exhibits reliability, corrosion resistance, and high current density performance.

Design and strength evaluation of structural joint made by electro-magnetic forming (EMF)

International Nuclear Information System (INIS)

Park, Young-Bae; Oh, Soo-Ik; Kim, Heon-Young

2004-01-01

Recently, weight reduction of vehicles has been of great interest, and consequently, the use of low-density materials in the automotive industry is increasing every year. Materials should not be substituted such a way that material of component parts is simply changed because there is a problem in achieving stiffness and strength. To achieve these requirements, the automobile should be redesigned totally. Aluminum spaceframe is rapidly being adopted as a body structure for accommodating lightness, stiffness and strength requirement. In aluminum spaceframe manufacturing, it is often required to join aluminum tube. But there are few suitable methods for joining aluminum tube, so that much interest has been focused on testing suitable joining methods. Joining by electromagnetic forming(EMF) can be useful method in joining aluminum tube, which offers some advantages compared with the conventional joining method. In this paper, joining by EMF was investigated as a pre-study for applying an automotive spaceframe. Finite element simulations and strength tests were performed to analyze the influence of geometric parameters on joint strength. Based on these results, configurations of axial joint and torque joint were suggested and guidelines for designing EMF joint were established

Determination of transference numbers in ionic conductors by the EMF method with active load

International Nuclear Information System (INIS)

Gorelov, V.P.

1988-01-01

Method for determining transference numbers in ionic conductors by means of measuring EMF of concentration cell with accout of polarization resistance of electrodes is suggested. The method enables to determine easily very small transference numbers of electron component against the background of predominating ionic conductivity. To illustrate the method there were determined transference numbers for the sample of industrial solid electrolyte in the cell; O 2 Pt|0.91ZrO 2 +0.09Y 2 O 3 |Pt, air

A novel database of bio-effects from non-ionizing radiation.

Science.gov (United States)

Leach, Victor; Weller, Steven; Redmayne, Mary

2018-06-06

A significant amount of electromagnetic field/electromagnetic radiation (EMF/EMR) research is available that examines biological and disease associated endpoints. The quantity, variety and changing parameters in the available research can be challenging when undertaking a literature review, meta-analysis, preparing a study design, building reference lists or comparing findings between relevant scientific papers. The Oceania Radiofrequency Scientific Advisory Association (ORSAA) has created a comprehensive, non-biased, multi-categorized, searchable database of papers on non-ionizing EMF/EMR to help address these challenges. It is regularly added to, freely accessible online and designed to allow data to be easily retrieved, sorted and analyzed. This paper demonstrates the content and search flexibility of the ORSAA database. Demonstration searches are presented by Effect/No Effect; frequency-band/s; in vitro; in vivo; biological effects; study type; and funding source. As of the 15th September 2017, the clear majority of 2653 papers captured in the database examine outcomes in the 300 MHz-3 GHz range. There are 3 times more biological "Effect" than "No Effect" papers; nearly a third of papers provide no funding statement; industry-funded studies more often than not find "No Effect", while institutional funding commonly reveal "Effects". Country of origin where the study is conducted/funded also appears to have a dramatic influence on the likely result outcome.

Assessment and comparison of total RF-EMF exposure in femtocell and macrocell base station scenarios

OpenAIRE

Aerts, Sam; Plets, David; Verloock, Leen; Martens, Luc; Joseph, Wout

2014-01-01

The indoor coverage of a mobile service can be drastically improved by deployment of an indoor femtocell base station (FBS). However, the impact of its proximity on the total exposure of the human body to radio-frequency (RF) electromagnetic fields (EMFs) is unknown. Using a framework designed for the combination of near-field and far-field exposure, the authors assessed and compared the RF-EMF exposure of a mobile-phone (MP) user that is either connected to an FBS or a conventional macrocell...

The design of measuring tubes and their influence on long term stability of EMF in filling machines; Einfluss der Messrohrkonstruktion auf die Langzeitstabilitaet von Abfuell-MID

Energy Technology Data Exchange (ETDEWEB)

Schumacher, B. [Krohne Messtechnik Gmbh und Co KG, Duisburg (Germany); Hofmann, F.

2008-07-01

Electro Magnetic Flow Meters (EMF) have been used for many decades measuring the volumetric flow rate of electric conductive liquids. Changes of the inner diameter because of temperature influences are creating measuring errors. In particular applications, where a high accuracy and repeatability is needed, this can cause trouble. This effect can be recognized after a long use of these meters and the corresponding cleaning procedures with liquid or steam, which is typical for the food and beverage industry. This effect is of a huge importance on electro magnetic flow meters, which are used on rotating filling machines for filling PET (plastic) bottles. Meters with ceramic tubes had a better long term stability than the ones with PFA liner. (orig.)

Synergistic effect of EMF-BEMER-type pulsed weak electromagnetic field and HPMA-bound doxorubicin on mouse EL4 T-cell lymphoma.

Science.gov (United States)

Říhová, Blanka; Etrych, Tomáš; Šírová, Milada; Tomala, Jakub; Ulbrich, Karel; Kovář, Marek

2011-12-01

We have investigated the effects of low-frequency pulsed electromagnetic field (LF-EMF) produced by BEMER device on experimental mouse T-cell lymphoma EL4 growing on conventional and/or athymic (nude) mice. Exposure to EMF-BEMER slowed down the growth of tumor mass and prolonged the survival of experimental animals. The effect was more pronounced in immuno-compromised nude mice compared to conventional ones. Acceleration of tumor growth was never observed. No measurable levels of Hsp 70 or increased levels of specific anti-EL4 antibodies were detected in the serum taken from experimental mice before and at different intervals during the experiment, i.e. before solid tumor appeared, at the time of its aggressive growth, and at the terminal stage of the disease. A significant synergizing antitumor effect was seen when EL4 tumor-bearing mice were simultaneously exposed to EMF-BEMER and treated with suboptimal dose of synthetic HPMA copolymer-based doxorubicin, DOX(HYD)-HPMA. Such a combination may be especially useful for heavily treated patients suffering from advanced tumor and requiring additional aggressive chemotherapy which, however, at that time could represent almost life-threatening way of medication.

ELECTROMOTIVE FORCE, EMF (CELLS)

Energy Technology Data Exchange (ETDEWEB)

Archer, M.D.; Feldberg, S.W.

1998-09-16

The voltage or electric potential difference across the terminals of a cell when no current is drawn from it. The emf of a cell is the sum of the electric potential differences (PDs) produced by a separation of charges (electrons or ions) that can occur at each phase boundary (or interface) in the cell. The magnitude of each PD depends on the chemical nature of the two contacting phases. Thus, at the interface between two different metals, some electrons will have moved from the metal with a higher free energy of electrons to the metal with a lower free energy of electrons. The resultant charge separation will produce a PD (just as charge separation produces a voltage across a capacitor) that, at equilibrium, exactly opposes further electron flow. Similarly, PDs can be produced when electrons partition across a metal/solution interface or metal/solid interface, and when ions partition across a solution/membrane/solution interface.

A large-scale measurement of electromagnetic fields near GSM base stations in Guangxi, China for risk communication.

Science.gov (United States)

Wu, Tongning; Shao, Qing; Yang, Lei; Qi, Dianyuan; Lin, Jun; Lin, Xiaojun; Yu, Zongying

2013-06-01

Radiofrequency (RF) electromagnetic field (EMF) exposure from wireless telecommunication base station antennae can lead to debates, conflicts or litigations among the adjacent residents if inappropriately managed. This paper presents a measurement campaign for the GSM band EMF exposure in the vicinity of 827 base station sites (totally 6207 measurement points) in Guangxi, China. Measurement specifications are designed for risk communication with the residents who previously complained of over-exposure. The EMF power densities with the global positioning system coordinate at each measured point were recorded. Compliance with the International Commission on Non-Ionizing Radiation Protection guidelines and Chinese environmental EMF safety standards was studied. The results show that the GSM band EMF level near the base stations is very low. The measurement results and the EMF risk communication procedures positively influence public perception of the RF EMF exposure from the base stations and promote the exchange of EMF exposure-related knowledge.

The RERF dosimetry measurements database

International Nuclear Information System (INIS)

Cullings, Harry M.; Fujita, Shoichiro; Preston, Dale L.; Grant, Eric J.; Shizuma, Kiyoshi; Hoshi, Masaharu; Maruyama, Takashi; Lowder, Wayne M.

2005-01-01

The Radiation Effects Research Foundation maintains a database containing detailed information on every known measurement of environmental materials in the cities of Hiroshima and Nagasaki for gamma-ray thermoluminescence or neutron activation produced by incident radiation from the atomic bomb detonations. The intent was to create a single information resource that would consistently document, as completely as possible in each case, a standard array of data for every known measurement. This database provides a uniquely comprehensive and carefully designed reference for the dosimetry reassessment. (J.P.N.)

A large-scale measurement of electromagnetic fields near GSM base stations in Guangxi, China for risk communication

International Nuclear Information System (INIS)

Wu, T.; Shao, Q.; Yang, L.; Qi, D.; Lin, J.; Lin, X.; Yu, Z.

2013-01-01

Radiofrequency (RF) electromagnetic field (EMF) exposure from wireless telecommunication base station antennae can lead to debates, conflicts or litigations among the adjacent residents if inappropriately managed. This paper presents a measurement campaign for the GSM band EMF exposure in the vicinity of 827 base station sites (totally 6207 measurement points) in Guangxi, China. Measurement specifications are designed for risk communication with the residents who previously complained of over-exposure. The EMF power densities with the global positioning system coordinate at each measured point were recorded. Compliance with the International Commission on Non-Ionizing Radiation Protection guidelines and Chinese environmental EMF safety standards was studied. The results show that the GSM band EMF level near the base stations is very low. The measurement results and the EMF risk communication procedures positively influence public perception of the RF EMF exposure from the base stations and promote the exchange of EMF exposure-related knowledge. (authors)

Emf, maximum power and efficiency of fuel cells

International Nuclear Information System (INIS)

Gaggioli, R.A.; Dunbar, W.R.

1990-01-01

This paper discusses the ideal voltage of steady-flow fuel cells usually expressed by Emf = -ΔG/nF where ΔG is the Gibbs free energy of reaction for the oxidation of the fuel at the supposed temperature of operation of the cell. Furthermore, the ideal power of the cell is expressed as the product of the fuel flow rate with this emf, and the efficiency of a real fuel cell, sometimes called the Gibbs efficiency, is defined as the ratio of the actual power output to this ideal power. Such viewpoints are flawed in several respects. While it is true that if a cell operates isothermally the maximum conceivable work output is equal to the difference between the Gibbs free energy of the incoming reactants and that of the leaving products, nevertheless, even if the cell operates isothermally, the use of the conventional ΔG of reaction assumes that the products of reaction leave separately from one another (and from any unused fuel), and when ΔS of reaction is positive it assumes that a free heat source exists at the operating temperature, whereas if ΔS is negative it neglects the potential power which theoretically could be obtained form the heat released during oxidation. Moreover, the usual cell does not operate isothermally but (virtually) adiabatically

Exposure of Nurses to Electromagnetic Fields

International Nuclear Information System (INIS)

Zmyslony, M.; Mamrot, P.; Politanski, P.

2004-01-01

Devices that produce electromagnetic fields (EMF) within the range of 0-300 GHz are widely used in surgical and diagnostic procedures. As a result a large number of physicians and other groups of medical personnel may be exposed to EMF. Even if patients' exposure, sometimes quite high, is inevitable or even recommended, medical personnel should be substantially protected against EMF exposure. Evaluation of nurses' exposure to EMF was based on an analysis of EMF magnitudes in the surrounding of magnetic resonance imaging (MRI) and electrosurgical units. These two kinds of apparatus are the strongest EMF sources in health service facilities. The measurements were performed according to the norms and hygiene regulations binding in Poland. Measurements performed by the Nofer Institute of Medicine in Lodz, and data collected by the Central Database on EMF Sources were used in the analysis. The Central Database is run by the Nofer Institute of Medicine at the behest of the Chief Sanitary Inspector. The study showed that nurses' exposure to EMF emitted by MRI and electrosurgical units complies with Polish norms and hygiene regulations and can be classified as negligible or allowable. It was found that work of nurses in exposure to EMF emitted by MRI and electrosurgical units can be regarded as safe, which means that their health should not be endangered by the performed job. (author)

Personal radiofrequency electromagnetic field exposure measurements in Swiss adolescents.

Science.gov (United States)

Roser, Katharina; Schoeni, Anna; Struchen, Benjamin; Zahner, Marco; Eeftens, Marloes; Fröhlich, Jürg; Röösli, Martin

2017-02-01

Adolescents belong to the heaviest users of wireless communication devices, but little is known about their personal exposure to radiofrequency electromagnetic fields (RF-EMF). The aim of this paper is to describe personal RF-EMF exposure of Swiss adolescents and evaluate exposure relevant factors. Furthermore, personal measurements were used to estimate average contributions of various sources to the total absorbed RF-EMF dose of the brain and the whole body. Personal exposure was measured using a portable RF-EMF measurement device (ExpoM-RF) measuring 13 frequency bands ranging from 470 to 3600MHz. The participants carried the device for three consecutive days and kept a time-activity diary. In total, 90 adolescents aged 13 to 17years participated in the study conducted between May 2013 and April 2014. In addition, personal measurement values were combined with dose calculations for the use of wireless communication devices to quantify the contribution of various RF-EMF sources to the daily RF-EMF dose of adolescents. Main contributors to the total personal RF-EMF measurements of 63.2μW/m 2 (0.15V/m) were exposures from mobile phones (67.2%) and from mobile phone base stations (19.8%). WLAN at school and at home had little impact on the personal measurements (WLAN accounted for 3.5% of total personal measurements). According to the dose calculations, exposure from environmental sources (broadcast transmitters, mobile phone base stations, cordless phone base stations, WLAN access points, and mobile phones in the surroundings) contributed on average 6.0% to the brain dose and 9.0% to the whole-body dose. RF-EMF exposure of adolescents is dominated by their own mobile phone use. Environmental sources such as mobile phone base stations play a minor role. Copyright © 2016 Elsevier Ltd. All rights reserved.

Effects of whole body exposure to extremely low frequency electromagnetic fields (ELF-EMF on serum and liver lipid levels, in the rat

Directory of Open Access Journals (Sweden)

Elias-Viñas David

2007-11-01

Full Text Available Abstract Backgound The effects of extremely low-frequency electromagnetic fields (ELF-EMF on the blood serum and liver lipid concentrations of male Wistar rats were assessed. Methods Animals were exposed to a single stimulation (2 h of ELF-EMF (60 Hz, 2.4 mT or sham-stimulated and thereafter sacrificed at different times (24, 48 or 96 h after beginning the exposure. Results Blood lipids showed, at 48 h stimulated animals, a significant increase of cholesterol associated to high density lipoproteins (HDL-C than those observed at any other studied time. Free fatty acid serum presented at 24 h significant increases in comparison with control group. The other serum lipids, triacylglycerols and total cholesterol did not show differences between groups, at any time evaluated. No statistical differences were shown on total lipids of the liver but total cholesterol was elevated at 24 h with a significant decrease at 96 h (p = 0.026. The ELF-EMF stimulation increased the liver content of lipoperoxides at 24 h. Conclusion Single exposures to ELF-EMF increases the serum values of HDL-C, the liver content of lipoperoxides and decreases total cholesterol of the liver. The mechanisms for the effects of ELF-EMF on lipid metabolism are not well understand yet, but could be associated to the nitric oxide synthase EMF-stimulation.

Photo-EMF Sensitivity of Porous Silicon Thin Layer–Crystalline Silicon Heterojunction to Ammonia Adsorption

Directory of Open Access Journals (Sweden)

Kae Dal Kwack

2011-01-01

Full Text Available A new method of using photo-electromotive force in detecting gas and controlling sensitivity is proposed. Photo-electromotive force on the heterojunction between porous silicon thin layer and crystalline silicon wafer depends on the concentration of ammonia in the measurement chamber. A porous silicon thin layer was formed by electrochemical etching on p-type silicon wafer. A gas and light transparent electrical contact was manufactured to this porous layer. Photo-EMF sensitivity corresponding to ammonia concentration in the range from 10 ppm to 1,000 ppm can be maximized by controlling the intensity of illumination light.

Photo-EMF sensitivity of porous silicon thin layer-crystalline silicon heterojunction to ammonia adsorption.

Science.gov (United States)

Vashpanov, Yuriy; Jung, Jae Il; Kwack, Kae Dal

2011-01-01

A new method of using photo-electromotive force in detecting gas and controlling sensitivity is proposed. Photo-electromotive force on the heterojunction between porous silicon thin layer and crystalline silicon wafer depends on the concentration of ammonia in the measurement chamber. A porous silicon thin layer was formed by electrochemical etching on p-type silicon wafer. A gas and light transparent electrical contact was manufactured to this porous layer. Photo-EMF sensitivity corresponding to ammonia concentration in the range from 10 ppm to 1,000 ppm can be maximized by controlling the intensity of illumination light.

Photo-EMF Sensitivity of Porous Silicon Thin Layer–Crystalline Silicon Heterojunction to Ammonia Adsorption

Science.gov (United States)

Vashpanov, Yuriy; Jung, Jae Il; Kwack, Kae Dal

2011-01-01

A new method of using photo-electromotive force in detecting gas and controlling sensitivity is proposed. Photo-electromotive force on the heterojunction between porous silicon thin layer and crystalline silicon wafer depends on the concentration of ammonia in the measurement chamber. A porous silicon thin layer was formed by electrochemical etching on p-type silicon wafer. A gas and light transparent electrical contact was manufactured to this porous layer. Photo-EMF sensitivity corresponding to ammonia concentration in the range from 10 ppm to 1,000 ppm can be maximized by controlling the intensity of illumination light. PMID:22319353

Extremely Low Frequency Electromagnetic Field (ELF-EMF and childhood leukemia near transmission lines: a review

Directory of Open Access Journals (Sweden)

P. A. Kokate

2016-04-01

Full Text Available This article presents a systematic review of most cited studies from developed countries those shed light on the potential relation between childhood leukemia and extremely low frequency electromagnetic field (ELF-EMF. All the findings of articles critically segregated as per some neglected parameters like number of samples, exposure duration, frequency range, distance from the radiation sources, and location during measurement of magnetic field density near power lines. Literature of major 50 studies are divided according to pooled analysis / meta-analysis, residential zone assessment and case-control studies.

Determination of standard Ghibbs free energy of formation of NiW sub 2 B sub 2 and activity of Ni-W binary system by EMF measurement. Kidenryokuho ni yoru NiW sub 2 B sub 2 no hyojun seisei Gibbs jiyu energy to Ni-W 2 seibunkei no katsuryo no sokutei

Energy Technology Data Exchange (ETDEWEB)

Kayama, Koichiro; Hashimoto, Yasuhiko; Suzuki, Kenji; Matsuo, Hideki (Himeji Inst. of Tech., Hyogo (Japan) Fukushin Electric Co., Ltd., Hyogo (Japan))

1989-12-25

NiW {sub 2} B {sub 2} (M phase), existing in trinary Ni-W-B system, was measured in standard Gibbs free energy (GF) of formation in the temperature range from 1273K to 1423K by an electromotive force method (EMF) with use of solid oxide electrolyte. First, oxide phase in equilibrium with three-phase M-W-Ni solid solution region was confirmed to be B {sub 2} O {sub 3}. Binary Ni-W system solid solution in equilibrium with M phase and W phase is constant in composition with Ni-16.4mo1%W in the above temperature range. WO {sub 2} and WO {sub 2.72} were actually measured in GF. As Ni-W solid solution is in equilibrium with WO {sub 2} and WO {sub 2.72}, binary Ni-W system was measured in activity by the EMF, and Ni-16.4mo1%W solid solution was calculated in GF of mixing by use of the above measured GF of WO {sub 2} and WO {sub 2.72}. Finally with use of sample in M-W-Ni solid solution region, M phase was calculated in GF by the EMF. The result of those calculations were expressed with experimental formulas. 19 refs., 10 figs., 3 tabs.

Health effect from EMF exposure of Korea population

Energy Technology Data Exchange (ETDEWEB)

Kim, Y. S.; Cho, Y. S.; Lee, J. T.; Yup, M. J.; Hong, J. H. [Institute of Environmental and Industrrial Medicine, Hanyang Univ., Seoul (Korea, Republic of)

2002-07-01

This study on health effect from EMF exposure was performed from June 2001 to April 2002 to compare changes in melatonin levels in urine of 40 subjects during their normal sleeping hours, to evaluate heart rate, ST segment in ventricular, and ventricular premature beat for cardiac function, to evaluate microwave exposure from cellular phones which may have a potential influence on the electro physiologic function of human brain, and each 20 subjects in occupational and non-occupational group measured personal 24-h continual exposure, using EMDEX(for 40-800Hz, Enertech Consultant, Inc.). An urine samples for analysis of melatonin excretion level were collected 1 times a day(immediately after wake-up) for five days from each subjects and analyzed by radioimmunoassay, HRV-test for relationship between heart rate and EMF exposure was performed heart rate beat using Holter for subjects, and double EEG-test were performed in 10 long-term users of the cellularphones when using and not using them, and a single EEG-test in 10 short-term users of the cellular phones. Each EEG-recording took 40 min consisting of 30 min filed exposure and 10 min measurement. And We estimated the economic value of the potential damage of electromagnetic radiation from cellular phone, and the willingness to pay of people for the study of the radiation damage led by the government, by applying contingent variation method. The results of this study were followed; 1. Personal exposure assessment 2. We showed not significant difference for the subjective average melatonin levels between occupational and non- occupational groups exposed to electromagnetic fields. 3. We showed no difference in the awake EEGs in terms of spectral power density measures between long-term users and short-term users of cellular phones. 4. We found that the economic value of the potential damage by the radiation for a typical cellular phone user is about 20,000 won per year and he would be willing to pay about 1,800 won

Conduct of a personal radiofrequency electromagnetic field measurement study: proposed study protocol.

Science.gov (United States)

Röösli, Martin; Frei, Patrizia; Bolte, John; Neubauer, Georg; Cardis, Elisabeth; Feychting, Maria; Gajsek, Peter; Heinrich, Sabine; Joseph, Wout; Mann, Simon; Martens, Luc; Mohler, Evelyn; Parslow, Roger C; Poulsen, Aslak Harbo; Radon, Katja; Schüz, Joachim; Thuroczy, György; Viel, Jean-François; Vrijheid, Martine

2010-05-20

The development of new wireless communication technologies that emit radio frequency electromagnetic fields (RF-EMF) is ongoing, but little is known about the RF-EMF exposure distribution in the general population. Previous attempts to measure personal exposure to RF-EMF have used different measurement protocols and analysis methods making comparisons between exposure situations across different study populations very difficult. As a result, observed differences in exposure levels between study populations may not reflect real exposure differences but may be in part, or wholly due to methodological differences. The aim of this paper is to develop a study protocol for future personal RF-EMF exposure studies based on experience drawn from previous research. Using the current knowledge base, we propose procedures for the measurement of personal exposure to RF-EMF, data collection, data management and analysis, and methods for the selection and instruction of study participants. We have identified two basic types of personal RF-EMF measurement studies: population surveys and microenvironmental measurements. In the case of a population survey, the unit of observation is the individual and a randomly selected representative sample of the population is needed to obtain reliable results. For microenvironmental measurements, study participants are selected in order to represent typical behaviours in different microenvironments. These two study types require different methods and procedures. Applying our proposed common core procedures in future personal measurement studies will allow direct comparisons of personal RF-EMF exposures in different populations and study areas.

Effects of four kinds of electromagnetic fields (EMF) with different frequency spectrum bands on ovariectomized osteoporosis in mice.

Science.gov (United States)

Lei, Tao; Li, Feijiang; Liang, Zhuowen; Tang, Chi; Xie, Kangning; Wang, Pan; Dong, Xu; Shan, Shuai; Liu, Juan; Xu, Qiaoling; Luo, Erping; Shen, Guanghao

2017-04-03

Electromagnetic fields (EMF) was considered as a non-invasive modality for treatment of osteoporosis while the effects were diverse with EMF parameters in time domain. In present study, we extended analysis of EMF characteristics from time domain to frequency domain, aiming to investigate effects of four kinds of EMF (LP (1-100 Hz), BP (100-3,000 Hz), HP (3,000-50,000 Hz) and AP (1-50,000 Hz)) on ovariectomized (OVX) osteoporosis (OP) in mice. Forty-eight 3-month-old female BALB/c mice were equally assigned to Sham, OVX, OVX + LP, OVX + BP, OVX + HP and OVX + AP groups (n = 8). After 8-week exposure (3 h/day), LP and BP significantly increased serum bone formation markers and osteogenesis-related gene expressions compared with OVX. Bedsides, LP and BP also slightly increased bone resorption activity compared with OVX, evidenced by increased RANKL/OPG ratio. HP sharply decreased serum bone formation and resporption markers and osteogenesis and osteoclastogenesis related gene expressions compared with OVX. AP had accumulative effects of LP, BP and HP, which significantly increased bone formation and decreased bone resporption activity compared with OVX. As a result, LP, BP and HP exposure did not later deterioration of bone mass, microarchitecture and mechanical strength in OVX mice with OP. However, AP stimulation attenuated OVX-induced bone loss.

Overview of EMF 22 U.S. transition scenarios

International Nuclear Information System (INIS)

Fawcett, Allen A.; Calvin, Katherine V.; Chesnaye, Francisco C. de la; Reilly, John M.; Weyant, John P.

2009-01-01

The Energy Modeling Forum 22 study included a set of U.S. transition scenarios designed to bracket a range of potential U.S. climate policy goals. Models from the six teams that participated in this part of the study include models that have been prominently involved in analyzing proposed U.S. climate legislation, as well as models that have been involved in the Climate Change Science Program and other parts of this EMF 22 study. This paper presents an overview of the results from the U.S. transition scenarios, and provides insights into the comparison of results from the participating models. (author)

Conduct of a personal radiofrequency electromagnetic field measurement study: proposed study protocol

Directory of Open Access Journals (Sweden)

Radon Katja

2010-05-01

Full Text Available Abstract Background The development of new wireless communication technologies that emit radio frequency electromagnetic fields (RF-EMF is ongoing, but little is known about the RF-EMF exposure distribution in the general population. Previous attempts to measure personal exposure to RF-EMF have used different measurement protocols and analysis methods making comparisons between exposure situations across different study populations very difficult. As a result, observed differences in exposure levels between study populations may not reflect real exposure differences but may be in part, or wholly due to methodological differences. Methods The aim of this paper is to develop a study protocol for future personal RF-EMF exposure studies based on experience drawn from previous research. Using the current knowledge base, we propose procedures for the measurement of personal exposure to RF-EMF, data collection, data management and analysis, and methods for the selection and instruction of study participants. Results We have identified two basic types of personal RF-EMF measurement studies: population surveys and microenvironmental measurements. In the case of a population survey, the unit of observation is the individual and a randomly selected representative sample of the population is needed to obtain reliable results. For microenvironmental measurements, study participants are selected in order to represent typical behaviours in different microenvironments. These two study types require different methods and procedures. Conclusion Applying our proposed common core procedures in future personal measurement studies will allow direct comparisons of personal RF-EMF exposures in different populations and study areas.

I-F starting method with smooth transition to EMF based motion-sensorless vector control of PM synchronous motor/generator

DEFF Research Database (Denmark)

Blaabjerg, Frede; Teodorescu, Remus; Fatu, M.

2008-01-01

This paper proposes a novel hybrid motion- sensorless control system for permanent magnet synchronous motors (PMSM) using a new robust start-up method called I-f control, and a smooth transition to emf-based vector control. The I-f method is based on separate control of id, iq currents with the r......This paper proposes a novel hybrid motion- sensorless control system for permanent magnet synchronous motors (PMSM) using a new robust start-up method called I-f control, and a smooth transition to emf-based vector control. The I-f method is based on separate control of id, iq currents......-adaptive compensator to eliminate dc-offset and phase-delay. Digital simulations for PMSM start-up with full load torque are presented for different initial rotor-positions. The transitions from I-f to emf motion-sensorless vector control and back as well, at very low-speeds, are fully validated by experimental...

qEMF3, a novel QTL for the early-morning flowering trait from wild rice, Oryza officinalis, to mitigate heat stress damage at flowering in rice, O. sativa.

Science.gov (United States)

Hirabayashi, Hideyuki; Sasaki, Kazuhiro; Kambe, Takashi; Gannaban, Ritchel B; Miras, Monaliza A; Mendioro, Merlyn S; Simon, Eliza V; Lumanglas, Patrick D; Fujita, Daisuke; Takemoto-Kuno, Yoko; Takeuchi, Yoshinobu; Kaji, Ryota; Kondo, Motohiko; Kobayashi, Nobuya; Ogawa, Tsugufumi; Ando, Ikuo; Jagadish, Krishna S V; Ishimaru, Tsutomu

2015-03-01

A decline in rice (Oryza sativa L.) production caused by heat stress is one of the biggest concerns resulting from future climate change. Rice spikelets are most susceptible to heat stress at flowering. The early-morning flowering (EMF) trait mitigates heat-induced spikelet sterility at the flowering stage by escaping heat stress during the daytime. We attempted to develop near-isogenic lines (NILs) for EMF in the indica-type genetic background by exploiting the EMF locus from wild rice, O. officinalis (CC genome). A stable quantitative trait locus (QTL) for flower opening time (FOT) was detected on chromosome 3. A QTL was designated as qEMF3 and it shifted FOT by 1.5-2.0 h earlier for cv. Nanjing 11 in temperate Japan and cv. IR64 in the Philippine tropics. NILs for EMF mitigated heat-induced spikelet sterility under elevated temperature conditions completing flower opening before reaching 35°C, a general threshold value leading to spikelet sterility. Quantification of FOT of cultivars popular in the tropics and subtropics did not reveal the EMF trait in any of the cultivars tested, suggesting that qEMF3 has the potential to advance FOT of currently popular cultivars to escape heat stress at flowering under future hotter climates. This is the first report to examine rice with the EMF trait through marker-assisted breeding using wild rice as a genetic resource. © The Author 2014. Published by Oxford University Press on behalf of the Society for Experimental Biology.

Dynamic Control of Adsorption Sensitivity for Photo-EMF-Based Ammonia Gas Sensors Using a Wireless Network

Directory of Open Access Journals (Sweden)

Yuriy Vashpanov

2011-11-01

Full Text Available This paper proposes an adsorption sensitivity control method that uses a wireless network and illumination light intensity in a photo-electromagnetic field (EMF-based gas sensor for measurements in real time of a wide range of ammonia concentrations. The minimum measurement error for a range of ammonia concentration from 3 to 800 ppm occurs when the gas concentration magnitude corresponds with the optimal intensity of the illumination light. A simulation with LabView-engineered modules for automatic control of a new intelligent computer system was conducted to improve measurement precision over a wide range of gas concentrations. This gas sensor computer system with wireless network technology could be useful in the chemical industry for automatic detection and measurement of hazardous ammonia gas levels in real time.

Ge/Si(001) heterostructures with dense arrays of Ge quantum dots: morphology, defects, photo-emf spectra and terahertz conductivity.

Science.gov (United States)

Yuryev, Vladimir A; Arapkina, Larisa V; Storozhevykh, Mikhail S; Chapnin, Valery A; Chizh, Kirill V; Uvarov, Oleg V; Kalinushkin, Victor P; Zhukova, Elena S; Prokhorov, Anatoly S; Spektor, Igor E; Gorshunov, Boris P

2012-07-23

: Issues of Ge hut cluster array formation and growth at low temperatures on the Ge/Si(001) wetting layer are discussed on the basis of explorations performed by high resolution STM and in-situ RHEED. Dynamics of the RHEED patterns in the process of Ge hut array formation is investigated at low and high temperatures of Ge deposition. Different dynamics of RHEED patterns during the deposition of Ge atoms in different growth modes is observed, which reflects the difference in adatom mobility and their 'condensation' fluxes from Ge 2D gas on the surface for different modes, which in turn control the nucleation rates and densities of Ge clusters. Data of HRTEM studies of multilayer Ge/Si heterostructures are presented with the focus on low-temperature formation of perfect films.Heteroepitaxial Si p-i-n-diodes with multilayer stacks of Ge/Si(001) quantum dot dense arrays built in intrinsic domains have been investigated and found to exhibit the photo-emf in a wide spectral range from 0.8 to 5 μm. An effect of wide-band irradiation by infrared light on the photo-emf spectra has been observed. Photo-emf in different spectral ranges has been found to be differently affected by the wide-band irradiation. A significant increase in photo-emf is observed in the fundamental absorption range under the wide-band irradiation. The observed phenomena are explained in terms of positive and neutral charge states of the quantum dot layers and the Coulomb potential of the quantum dot ensemble. A new design of quantum dot infrared photodetectors is proposed.By using a coherent source spectrometer, first measurements of terahertz dynamical conductivity (absorptivity) spectra of Ge/Si(001) heterostructures were performed at frequencies ranged from 0.3 to 1.2 THz in the temperature interval from 300 to 5 K. The effective dynamical conductivity of the heterostructures with Ge quantum dots has been discovered to be significantly higher than that of the structure with the same amount of bulk

Instrumentation for electromagnetic field generation in biological measurements

International Nuclear Information System (INIS)

Malaric, K.; Malaric, R.; Tkalec, M.; Lenicek, I.; Sala, A.

2005-01-01

Electromagnetic fields (EMFs) are part of everyday life in modern world. Extremely low-frequency EMFs (50 Hz) are produced by most electric home appliance, electric power transmission and distribution lines. For the last ten years mobile phones have been widely used all around the world. They operate on the EMF frequencies from 400 MHz to 1900 MHz. The effects of EMFs on living organisms have been the subject of debate and research for the last thirty years. The instrumentation for generation of EMFs have been designed at the Faculty of Electrical Engineering and Computing, Zagreb, and can be used for controlled exposure to different EMFs. To study the effect of extremely low-frequency EMF, duckweed (Lemna minor) - the model plant in biological measurement, test setup was made for magnetic field in Helmholtz coil and for electric field between two parallel circle electrodes. For the effect of mobile phones frequencies, test setup with exposition to the electromagnetic field was done with Gigahertz Transversal Electromagnetic Mode (GTEM) cell. The research confirmed that instrumentation used in these experiments is suitable for evaluation of biological effects of EMFs. The effect of different field strengths, exposure times and modulation can be tested with these instrumentation.(author)

Mission critical database for SPS accelerator measurements

CERN Document Server

Billen, R; Laugier, I; Reguero, I; Segura, N

1995-01-01

In order to maintain efficient control over the hadron and lepton beams in CERN¹s SPS accelerator, measurements are of vital importance. Beam parameters such as intensities, positions and losses need to be rapidly available in the SPS control room to allow the operators to monitor, judge and act on beam physics conditions. For the 1994 SPS startup, a completely new and redesigned measurement system based on client and server C-programs running on UNIX-workstations was introduced. The kernel of this new measurement system is an on-line ORACLE database.The NIAM method was used for the database design as well as a technique to tag synchronized data with timeslots instead of timestamps. A great attention was paid to proper storage allocation for tables and indices since this has a major impact on the efficiency of the database, due to its time-critical nature. Many new features of Oracle7 were exploited to reduce the surrounding software.During the 1994 SPS physics run, this new measurement system was commission...

RF EMF Risk Perception Revisited: Is the Focus on Concern Sufficient for Risk Perception Studies?

Science.gov (United States)

Wiedemann, Peter M; Freudenstein, Frederik; Böhmert, Christoph; Wiart, Joe; Croft, Rodney J

2017-06-08

An implicit assumption of risk perception studies is that concerns expressed in questionnaires reflect concerns in everyday life. The aim of the present study is to check this assumption, i.e., the extrapolability of risk perceptions expressed in a survey, to risk perceptions in everyday life. To that end, risk perceptions were measured by a multidimensional approach. In addition to the traditional focus on measuring the magnitude of risk perceptions, the thematic relevance (how often people think about a risk issue) and the discursive relevance (how often people think about or discuss a risk issue) of risk perceptions were also collected. Taking into account this extended view of risk perception, an online survey was conducted in six European countries with 2454 respondents, referring to radio frequency electromagnetic field (RF EMF) risk potentials from base stations, and access points, such as WiFi routers and cell phones. The findings reveal that the present study's multidimensional approach to measuring risk perception provides a more differentiated understanding of RF EMF risk perception. High levels of concerns expressed in questionnaires do not automatically imply that these concerns are thematically relevant in everyday life. We use thematic relevance to distinguish between enduringly concerned (high concern according to both questionnaire and thematic relevance) and not enduringly concerned participants (high concern according to questionnaire but no thematic relevance). Furthermore, we provide data for the empirical value of this distinction: Compared to other participants, enduringly concerned subjects consider radio frequency electromagnetic field exposure to a greater extent as a moral and affective issue. They also see themselves as highly exposed to radio frequency electromagnetic fields. However, despite these differences, subjects with high levels of thematic relevance are nevertheless sensitive to exposure reduction as a means for improving the

RF EMF Risk Perception Revisited: Is the Focus on Concern Sufficient for Risk Perception Studies?

Science.gov (United States)

Wiedemann, Peter M.; Freudenstein, Frederik; Böhmert, Christoph; Wiart, Joe; Croft, Rodney J.

2017-01-01

An implicit assumption of risk perception studies is that concerns expressed in questionnaires reflect concerns in everyday life. The aim of the present study is to check this assumption, i.e., the extrapolability of risk perceptions expressed in a survey, to risk perceptions in everyday life. To that end, risk perceptions were measured by a multidimensional approach. In addition to the traditional focus on measuring the magnitude of risk perceptions, the thematic relevance (how often people think about a risk issue) and the discursive relevance (how often people think about or discuss a risk issue) of risk perceptions were also collected. Taking into account this extended view of risk perception, an online survey was conducted in six European countries with 2454 respondents, referring to radio frequency electromagnetic field (RF EMF) risk potentials from base stations, and access points, such as WiFi routers and cell phones. The findings reveal that the present study’s multidimensional approach to measuring risk perception provides a more differentiated understanding of RF EMF risk perception. High levels of concerns expressed in questionnaires do not automatically imply that these concerns are thematically relevant in everyday life. We use thematic relevance to distinguish between enduringly concerned (high concern according to both questionnaire and thematic relevance) and not enduringly concerned participants (high concern according to questionnaire but no thematic relevance). Furthermore, we provide data for the empirical value of this distinction: Compared to other participants, enduringly concerned subjects consider radio frequency electromagnetic field exposure to a greater extent as a moral and affective issue. They also see themselves as highly exposed to radio frequency electromagnetic fields. However, despite these differences, subjects with high levels of thematic relevance are nevertheless sensitive to exposure reduction as a means for improving the

Nepal and the Americas: Can Electromagnetic Field (EMF) Signals Be Detected There That Yield Information About Culturally Dictated Spiritual Values, and Can Computers Interface Their Assessment?

Science.gov (United States)

Aryal, Sanjita; Mc Leod, Roger D.; Mc Leod, David M.

2002-10-01

Nepal has a particularly rich tradition of culturally developed views on the material and spiritual worlds, and also has a powerful natural environment that may generate EMFs in conjunction with natural phenomena. We have an interest in determining whether these can be detected by portable technological means, and recording such data on notebook-type computers for analysis and evaluation. One goal is to assess whether historic Native Americans, such as Maine's and New Hampshire's Molly Ockett, may have been motivated in their selection of special, and perhaps, to them, "sacred" sites for their attention and as possible burial sites. Some of these may have been chosen on the basis of the EMFs that seem to emanate from them, and their assessment of what they meant to their worldviews. Do some Amerindians consider the EMF and reincarnation as requiring their rejection of material aspects of existence? Could other traditional cultures, or even suicidal terrorists, be sensitive to "information" they may receive from the EMF?

Retraction: Evaluation of carcinogenic effects of electromagnetic fields (EMF).

Science.gov (United States)

Mehic, Bakir

2010-11-01

The Editor-in-chief of the Bosnian Journal of Basic Medical Sciences has decided to retract the article from Bayazit V et al. [1] entitled as: "Evaluation of carcinogenic effects of electromagnetic fields (EMF)" published in Bosn J Basic Med Sci. 2010 Aug;10(3):245-50. After the editorial office was alerted of possible plagiarism in the article, it conducted thorough investigation and concluded that the article apparently represents plagiarized material from two World Health Organization reports, one European Commission report and other sources. Since this is considered scientific plagiarism and scientific misconduct, Editor-in-chief has decided to withdraw the article. The authors have agreed with the editorial office decision.

Design and fabrication of a microplatform for the proximity effect study of localized ELF-EMF on the growth of in vitro HeLa and PC-12 cells

International Nuclear Information System (INIS)

Chen, Y C; Chen, C C; Cheng, Y T; Tu, W; Tseng, F G

2010-01-01

This paper presents a platform technology with experimental results that show the scientists and biologists a way to rapidly investigate and analyze the biological effects of localized extremely low frequency (ELF) electromagnetic field (EMF) on living cells. The proximity effect of the localized ELF-EMF on living cells is revealed using the bio-compatible microplatform on which an on-glass inductive coil array, the source of the localized ELF-EMF in micro scale, is designed, fabricated and operated with a field strength of 1.2 ± 0.1 mT at 60 Hz for cell culturing study. After a 72 h ELF-EMF exposure, HeLa (human cervical cancer) and PC-12 (rat pheochromocytoma) cells exhibit about 18.4% and 12.9% cell proliferation rate reduction, respectively. Furthermore, according to the presented dynamic model, the reduction of the proliferation can be attributed to the interference of signal transduction processes due to the tangential currents induced around the cells

The CERN accelerator measurement database: on the road to federation

International Nuclear Information System (INIS)

Roderick, C.; Billen, R.; Gourber-Pace, M.; Hoibian, N.; Peryt, M.

2012-01-01

The Measurement database, acting as short-term central persistence and front-end of the CERN accelerator Logging Service, receives billions of time-series data per day for 200000+ signals. A variety of data acquisition systems on hundreds of front-end computers publish source data that eventually end up being logged in the Measurement database. As part of a federated approach to data management, information about source devices are defined in a Configuration database, whilst the signals to be logged are defined in the Measurement database. A mapping, which is often complex and subject to change/extension, is required in order to subscribe to the source devices, and write the published data to the corresponding named signals. Since 2005, this mapping was done by means of dozens of XML files, which were manually maintained by multiple persons, resulting in a configuration that was error prone. In 2010 this configuration was fully centralized in the Measurement database itself, reducing significantly the complexity and the actors in the process. Furthermore, logging processes immediately pick up modified configurations via JMS based notifications sent directly from the database. This paper will describe the architecture and the benefits of current implementation, as well as the next steps on the road to a fully federated solution. (authors)

Investigation of micronuclei induction in human peripheral blood lymphocytes exposed in vitro to EMF RF

International Nuclear Information System (INIS)

Kolomiets, Irina A.; Triapitsina, Galina A.; Polevik, Nikolai D.; Pryakhin, Evgeny A.

2008-01-01

Full text: The widespread application of cellular phones is of great concern in view possible consequences for human health. The aim of this study is to assess the capability of electromagnetic fields (EMF) RF with frequency 925 MHz and modulation 217 Hz to induce genotoxic effects as evaluated by the in vitro micronucleus assay on peripheral blood lymphocytes. The flasks of peripheral blood samples collected from healthy volunteers (5 men and 5 women) were placed just on the oscillator of emitting antenna. The signals were produced by the laboratory research plant and were evaluated at four specific absorption rates (SARs) - 0; 0.29; 1.2; 8.1 W/kg. SARs were determined by the calorimetric method. Phytohaemagglutinin stimulated lymphocytes were exposed three times for 10 minutes in the G o (the first 30 minutes after the beginning of cultivation), S (24 hours later), G 2 -M (after 48 hours from the beginning of cultivation) stages of the cell cycle. 72-hours cultures of lymphocytes were examined to determine the extent of micronuclei. The Mann-Whitney U-test was used to evaluate the significance for comparison. The data indicated a significant increase of micronuclei in human lymphocytes exposed to EMF RF (6.5 ± 0.51 0/00; 7.1 ± 0.66 0/00; 7.0 ± 0.50 0/00) in comparison with sham-exposed lymphocytes (3.0 ± 0.60 0/00). There was not revealed a dose-dependent increase of micronuclei in human lymphocytes. It was suggested that the increase of micronuclei in lymphocytes is explicated by a particularity of EMF RF just near the oscillator of emitting antenna. (author)

Instruments to assess and measure personal and environmental radiofrequency-electromagnetic field exposures.

Science.gov (United States)

Bhatt, Chhavi Raj; Redmayne, Mary; Abramson, Michael J; Benke, Geza

2016-03-01

Radiofrequency-electromagnetic field (RF-EMF) exposure of human populations is increasing due to the widespread use of mobile phones and other telecommunication and broadcasting technologies. There are ongoing concerns about potential short- and long-term public health consequences from RF-EMF exposures. To elucidate the RF-EMF exposure-effect relationships, an objective evaluation of the exposures with robust assessment tools is necessary. This review discusses and compares currently available RF-EMF exposure assessment instruments, which can be used in human epidemiological studies. Quantitative assessment instruments are either mobile phone-based (apps/software-modified and hardware-modified) or exposimeters. Each of these tool has its usefulness and limitations. Our review suggests that assessment of RF-EMF exposures can be improved by using these tools compared to the proxy measures of exposure (e.g. questionnaires and billing records). This in turn, could be used to help increase knowledge about RF-EMF exposure induced health effects in human populations.

Instruments to assess and measure personal and environmental radiofrequency-electromagnetic field exposures

International Nuclear Information System (INIS)

Bhatt, Chhavi R.; Redmayne, Mary; Abramson, Michael J.; Benke, Geza

2016-01-01

Radiofrequency-electromagnetic field (RF-EMF) exposure of human populations is increasing due to the widespread use of mobile phones and other telecommunication and broadcasting technologies. There are ongoing concerns about potential short- and long-term public health consequences from RF-EMF exposures. To elucidate the RF-EMF exposure-effect relationships, an objective evaluation of the exposures with robust assessment tools is necessary. This review discusses and compares currently available RF-EMF exposure assessment instruments, which can be used in human epidemiological studies. Quantitative assessment instruments are either mobile phone-based (apps/software-modified and hardware-modified) or exposimeters. Each of these tool has its usefulness and limitations. Our review suggests that assessment of RF-EMF exposures can be improved by using these tools compared to the proxy measures of exposure (e.g. questionnaires and billing records). This in turn, could be used to help increase knowledge about RF-EMF exposure induced health effects in human populations.

Modeled and perceived RF-EMF exposure from mobile phone base stations in relation to symptom reporting

NARCIS (Netherlands)

Martens, A.L.

2017-01-01

Technological changes have led to a rapid increase in the use of mobile technology. This is coupled with an increase in the number of mobile phone base stations that emit radiofrequency electromagnetic fields (RF-EMF). There are concerns about the potential health effects of this exposure among

Universal "Imaginary Closed Circuit Method" and Formula for Determination of Direction of Induced EMF/Current

Science.gov (United States)

Atram, Dattatraya Balaram

2011-01-01

Fleming's right-hand rule and the right-flat-hand rule are generally applied for determining the direction of flow of induced emf/current in straight conductors. The right-hand-fingers rule is applied for coils only. The right-hand-thumb rule can be applied for either straight conductors or coils. Different rules have to be applied for different…

A database of aerothermal measurements in hypersonic flow for CFD validation

Science.gov (United States)

Holden, M. S.; Moselle, J. R.

1992-01-01

This paper presents an experimental database selected and compiled from aerothermal measurements obtained on basic model configurations on which fundamental flow phenomena could be most easily examined. The experimental studies were conducted in hypersonic flows in 48-inch, 96-inch, and 6-foot shock tunnels. A special computer program was constructed to provide easy access to the measurements in the database as well as the means to plot the measurements and compare them with imported data. The database contains tabulations of model configurations, freestream conditions, and measurements of heat transfer, pressure, and skin friction for each of the studies selected for inclusion. The first segment contains measurements in laminar flow emphasizing shock-wave boundary-layer interaction. In the second segment, measurements in transitional flows over flat plates and cones are given. The third segment comprises measurements in regions of shock-wave/turbulent-boundary-layer interactions. Studies of the effects of surface roughness of nosetips and conical afterbodies are presented in the fourth segment of the database. Detailed measurements in regions of shock/shock boundary layer interaction are contained in the fifth segment. Measurements in regions of wall jet and transpiration cooling are presented in the final two segments.

Retraction: Evaluation of Carcinogenic Effects of Electromagnetic Fields (Emf

Directory of Open Access Journals (Sweden)

Bakir Mehic

2010-08-01

Full Text Available This retracts the article "EVALUATION OF CARCINOGENIC EFFECTS OF ELECTROMAGNETIC FIELDS (EMF" on page 245. The Editor-in-chief of the Bosnian Journal ofBasic Medical Sciences has decided to retract the article from Bayazit V et al. [1] entitled as: “Evaluation of carcinogenic effects of electromagnetic fields (EMF” published in Bosn J Basic Med Sci. 2010 Aug;10(3:245-50.After the editorial office was alerted of possible plagiarism in the article, it conducted thorough investigation and concluded that the article apparently represents plagiarized material from two World Health Organization reports, one European Commission report and other sources. Since this is considered scientific plagiarism and scientific misconduct, Editor-in-chief has decided to withdraw the article. The authors have agreed with the editorial office decision.

Thermo-emf of cadmium under hydrostatic pressure up to 3.0 GPa in the range of electron-topological transition

International Nuclear Information System (INIS)

Krajdenov, V.F.; Itskevich, E.S.; Gapotchenko, A.G.

1995-01-01

Dependence of longitudinal d and transverse α thermo-emf of cadmium in 4-300 K temperature range at pressures up to 3.0 GPa was investigated. The anomaly value depends sufficiently on sample perfection

Assessment and comparison of total RF-EMF exposure in femtocell and macrocell base station scenarios.

Science.gov (United States)

Aerts, Sam; Plets, David; Verloock, Leen; Martens, Luc; Joseph, Wout

2014-12-01

The indoor coverage of a mobile service can be drastically improved by deployment of an indoor femtocell base station (FBS). However, the impact of its proximity on the total exposure of the human body to radio-frequency (RF) electromagnetic fields (EMFs) is unknown. Using a framework designed for the combination of near-field and far-field exposure, the authors assessed and compared the RF-EMF exposure of a mobile-phone (MP) user that is either connected to an FBS or a conventional macrocell base station while in an office environment. It is found that, in average macrocell coverage and MP use-time conditions and for Universal Mobile Telecommunications System technology, the total exposure can be reduced by a factor of 20-40 by using an FBS, mostly due to the significant decrease in the output power of the MP. In general, the framework presented in this study can be used for any exposure scenario, featuring any number of technologies, base stations and/or access points, users and duration. © The Author 2013. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Measurement of electromagnetic force between multiple bulk superconductors; Fukusu no barukutai chodendotai to eikyujishakukairo niokeru denjiryoku sokutei

Energy Technology Data Exchange (ETDEWEB)

Otani, T.; Murakami, M. [Superconductivity Research Laboratory, Tokyo (Japan); Nagashima, K. [Railway Technical Research Institute, Tokyo (Japan); Murayama, M. [Shikoku Ekectric Power Co., Inc., Kagawa (Japan)

1999-11-25

The electromagnetic force (EMF) that is exhibited by the interaction between bulk superconductors and permanent magnets is used for magnetic levitation devices. To facilitate such applications, it is necessary to enhance the EMF. We measured the EMF for Y-Ba-Cu-O superconductors with different shapes and dimensions by varying the structure of disk magnets such as their thickness and the number of poles. The EMF is strongly dependent on the magnet structure as long as permanent magnets and good quality bulk superconductors are used. Thus, for the design of practical devices, it is important to optimize the magnet structure. (author)

Non-specific physical symptoms in relation to actual and perceived exposure to electromagnetic fields (EMF) : A multidisciplinary approach

NARCIS (Netherlands)

Baliatsas, C.

2015-01-01

The association between non-specific physical symptoms (NSPS) such as headache, fatigue, nausea and sleep problems and exposure to electromagnetic fields (EMF) in the general population has been a subject of ongoing scientific debate and public concern. A limited number of epidemiological studies

Thermophysical Properties Measurement of High-Temperature Liquids Under Microgravity Conditions in Controlled Atmospheric Conditions

Science.gov (United States)

Watanabe, Masahito; Ozawa, Shumpei; Mizuno, Akotoshi; Hibiya, Taketoshi; Kawauchi, Hiroya; Murai, Kentaro; Takahashi, Suguru

2012-01-01

Microgravity conditions have advantages of measurement of surface tension and viscosity of metallic liquids by the oscillating drop method with an electromagnetic levitation (EML) device. Thus, we are preparing the experiments of thermophysical properties measurements using the Materials-Science Laboratories ElectroMagnetic-Levitator (MSL-EML) facilities in the international Space station (ISS). Recently, it has been identified that dependence of surface tension on oxygen partial pressure (Po2) must be considered for industrial application of surface tension values. Effect of Po2 on surface tension would apparently change viscosity from the damping oscillation model. Therefore, surface tension and viscosity must be measured simultaneously in the same atmospheric conditions. Moreover, effect of the electromagnetic force (EMF) on the surface oscillations must be clarified to obtain the ideal surface oscillation because the EMF works as the external force on the oscillating liquid droplets, so extensive EMF makes apparently the viscosity values large. In our group, using the parabolic flight levitation experimental facilities (PFLEX) the effect of Po2 and external EMF on surface oscillation of levitated liquid droplets was systematically investigated for the precise measurements of surface tension and viscosity of high temperature liquids for future ISS experiments. We performed the observation of surface oscillations of levitated liquid alloys using PFLEX on board flight experiments by Gulfstream II (G-II) airplane operated by DAS. These observations were performed under the controlled Po2 and also under the suitable EMF conditions. In these experiments, we obtained the density, the viscosity and the surface tension values of liquid Cu. From these results, we discuss about as same as reported data, and also obtained the difference of surface oscillations with the change of the EMF conditions.

Radio-frequency electromagnetic field (RF-EMF) exposure levels in different European outdoor urban environments in comparison with regulatory limits

NARCIS (Netherlands)

Urbinello, Damiano; Joseph, Wout; Huss, Anke|info:eu-repo/dai/nl/331385880; Verloock, Leen; Beekhuizen, Johan|info:eu-repo/dai/nl/34472641X; Vermeulen, Roel|info:eu-repo/dai/nl/216532620; Martens, Luc; Röösli, Martin

Background: Concerns of the general public about potential adverse health effects caused by radio-frequency electromagnetic fields (RF-EMFs) led authorities to introduce precautionary exposure limits, which vary considerably between regions. It may be speculated that precautionary limits affect the

Electromotive force measurement of lanthanides in Bi solution

International Nuclear Information System (INIS)

Sheng, Jiawei; Yamana, Hajimu; Moriyama, Hirotake

2000-01-01

The thermodynamic properties of Tb, Dy and Ho dissolved in liquid Bi were determined by the electromotive force (EMF) measurement method. The EMF of the following galvanic cell was measured in the range of 500-800degC over a wide range of solute concentration. Ln(solid)|KCl-LiCl|Ln-Bi (solution) There was observed a linear relationship between the EMFs and the lanthanide (Ln) concentrations in liquid Bi phase at a constant temperature, which agreed with the Nernst's equation. The obtained activity coefficients of lanthanides in liquid Bi solution were almost constant at a fixed temperature condition. Temperature effects on the activity coefficients could be expressed by the following equation: log γ=a+b/T, where a and b are experimental constants which correspond to the entropy and enthalpy of the formation of Ln-Bi compound in the melt, respectively. The thermodynamic quantities obtained were discussed in terms of their systematics along the 4f series. (author)

Drone based measurement system for radiofrequency exposure assessment.

Science.gov (United States)

Joseph, Wout; Aerts, Sam; Vandenbossche, Matthias; Thielens, Arno; Martens, Luc

2016-03-10

For the first time, a method to assess radiofrequency (RF) electromagnetic field (EMF) exposure of the general public in real environments with a true free-space antenna system is presented. Using lightweight electronics and multiple antennas placed on a drone, it is possible to perform exposure measurements. This technique will enable researchers to measure three-dimensional RF-EMF exposure patterns accurately in the future and at locations currently difficult to access. A measurement procedure and appropriate measurement settings have been developed. As an application, outdoor measurements are performed as a function of height up to 60 m for Global System for Mobile Communications (GSM) 900 MHz base station exposure. Bioelectromagnetics. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Interaction between policy measures. Analysis tool in the MURE database

Energy Technology Data Exchange (ETDEWEB)

Boonekamp, P.G.M. [ECN Policy Studies, Petten (Netherlands); Faberi, S. [Institute of Studies for the Integration of Systems ISIS, Rome (Italy)

2013-12-15

The ODYSSEE database on energy efficiency indicators (www.odyssee-indicators.org) has been set up to enable the monitoring and evaluation of realised energy efficiency improvements and related energy savings. The database covers the 27 EU countries as well as Norway and Croatia and data are available from 1990 on. This report describes how sets of mutually consistent impacts for packages as well as individual policy measures can be determined in the MURE database (MURE is the French abbreviation for Mesures d'Utilisation Rationnelle de l'Energie)

The Seminole Serpent Warrior At Miramar, FL, Shows Settlement Locations Enabled Environmental Monitoring Reminiscent Of the Four-corners Kokopelli-like EMF Phenomena, and Related to Earthquakes, Tornados and Hurricanes.

Science.gov (United States)

Balam Matagamon, Chan; Pawa Matagamon, Sagamo

2004-03-01

Certain Native Americans of the past seem to have correctly deduced that significant survival information for their tradition-respecting cultures resided in EMF-based phenomena that they were monitoring. This is based upon their myths and the place or cult-hero names they bequeathed us. The sites we have located in FL have been detectable by us visually, usually by faint blue light, or by the elicitation of pin-like prickings, by somewhat intense nervous-system response, by EMF interactions with aural electrochemical systems that can elicit tinitus, and other ways. In the northeast, Cautantowit served as a harbinger of Indian summer, and appears to be another alter ego of the EMF. The Miami, FL Tequesta site along the river clearly correlates with tornado, earthquake and hurricane locations. Sites like the Mohave Deserts giant man may have had similar significance.

EMF-research 1993-2003[Health hazards from Electromagnetic fields]; EMF-forskning 1993-2003

Energy Technology Data Exchange (ETDEWEB)

Lundberg, Petra; Lindgren, Rolf [SwedPower AB, Stockholm (Sweden)

2005-09-01

This report summarises 10 years of research on power frequency electric and magnetic fields. Cancer is the topic for which most research has been carried out during the 10-year-period. Epidemiological studies have shown statistical correlations between long time exposure to magnetic fields and a few forms of cancer. The most obvious correlation is between childhood leukaemia and magnetic fields from power lines. However, the correlations correspond to very small increases in risk and since there is no experimental evidence and no trustworthy mechanism exists, a cause-and-effect relationship cannot be established. Furthermore, there are also comprehensive and well-performed studies which show no correlations. Some studies indicate a correlation between electric and magnetic fields and cognitive functions and diffuse central nervous symptoms. The results show correspondence with the hypothesis that magnetic fields cause a chronic stress effect to the central nervous system. A relatively strong correlation has been shown between ALS (amyotrophic lateral sclerosis) and electricity related labour. EMF is however only one of several conceivable explanations. An equivalent, although weaker, correlation has also been shown for Alzheimer's decease. It can be stated that frequent electric and magnetic fields do not seem to have any influence on reproducibility, such as damage on the foetus or negative effects on the reproduction in humans or animals. A potentially important area is the effect on the immune system in humans and animals. In fact, it has been noted that magnetic fields may activate the immune system whilst long term exposure seems to impoverish the capacity of the immune system. The research on field variables and connected mechanisms shows that intermittent magnetic fields have stronger biological impact than continuous fields. Another observation is that biological effects often appear as window effects in amplitude, frequency and sometimes even in time

EMF radiations (1800 MHz)-inhibited early seedling growth of maize (Zea mays) involves alterations in starch and sucrose metabolism.

Science.gov (United States)

Kumar, Arvind; Singh, Harminder Pal; Batish, Daizy R; Kaur, Shalinder; Kohli, Ravinder Kumar

2016-07-01

The present study investigated the impact of 1800-MHz electromagnetic field radiations (EMF-r), widely used in mobile communication, on the growth and activity of starch-, sucrose-, and phosphate-hydrolyzing enzymes in Zea mays seedlings. We exposed Z. mays to modulated continuous wave homogenous EMF-r at specific absorption rate (SAR) of 1.69±0.0 × 10(-1) W kg(-1) for ½, 1, 2, and 4 h. The analysis of seedlings after 7 days revealed that short-term exposure did not induce any significant change, while longer exposure of 4 h caused significant growth and biochemical alterations. There was a reduction in the root and coleoptile length with more pronounced effect on coleoptile growth (23 % reduction on 4-h exposure). The contents of photosynthetic pigments and total carbohydrates declined by 13 and 18 %, respectively, in 4-h exposure treatments compared to unexposed control. The activity of starch-hydrolyzing enzymes-α- and β-amylases-increased by ∼92 and 94 %, respectively, at an exposure duration of 4 h, over that in the control. In response to 4-h exposure treatment, the activity of sucrolytic enzymes-acid invertases and alkaline invertases-was increased by 88 and 266 %, whereas the specific activities of phosphohydrolytic enzymes (acid phosphatases and alkaline phosphatases) showed initial increase up to ≤2 h duration and then declined at >2 h exposure duration. The study concludes that EMF-r-inhibited seedling growth of Z. mays involves interference with starch and sucrose metabolism.

Real-time database for high resolution neutron monitor measurements

Energy Technology Data Exchange (ETDEWEB)

Steigies, Christian T.; Rother, Oliver M.; Wimmer-Schweingruber, Robert F.; Heber, Bernd [IEAP, Christian-Albrechts-Universitaet zu Kiel (Germany)

2008-07-01

The worldwide network of standardised neutron monitors is, after 50 years, still the state-of-the-art instrumentation to measure spectral variations of the primary cosmic ray component. These measurements are an ideal complement to space based cosmic ray measurements. Data from the approximately 50 IGY and NM64 neutron monitors is stored locally but also available through data collections sites like the World Data Center (WDC) or the IZMIRAN ftp server. The data from the WDC is in a standard format, but only hourly values are available. IZMIRAN collects the data in the best available time resolution, but the data arrives on the ftp server only hours, sometimes days, after the measurements. Also, the high time-resolution measurements of the different stations do not have a common format, a conversion routine for each station is needed before they can be used for scientific analysis. Supported by the 7th framework program of the European Commission, we are setting up a real-time database where high resolution cosmic ray measurements will be stored and accessible immediately after the measurement. Stations that do not have 1-minute resolution measurements will be upgraded to 1-minute or better resolution with an affordable standard registration system, that will submit the measurements to the database via the internet in real-time.

Designing and Testing a Database for the Qweak Measurement

Science.gov (United States)

Holcomb, Edward; Spayde, Damon; Pote, Tim

2009-05-01

The aim of the Qweak experiment is to make the most precise determination to date, aside from measurements at the Z-pole, of the Weinberg angle via a measurement of the proton's weak charge. The weak charge determines a particle's interaction with Z-type bosons. According to the Standard Model the value of the angle depends on the momentum of the exchanged Z boson and is well-determined. Deviations from the Standard Model would indicate new physics. During Qweak, bundles of longitudinally polarized electrons will be scattered from a proton target. Elastically scattered electrons will be detected in one of eight quartz bars via the emitted Cerenkov radiation. Periodically the helicity of these electrons will be reversed. The difference in the scattering rates of these two helicity states creates an asymmetry; the Weinberg angle can be calculated from this. Our role in the collaboration was the design, creation, and implementation of a database for the Qweak experiment. The purpose of this database is to store pertinent information, such as detector asymmetries and monitor calibrations, for later access. In my talk I plan to discuss the database design and the results of various tests.

Notes on methodology and pitfalls in science and research and on communication of results. Some aspects related to EMF; Synpunkter paa metodik och fallgropar inom vetenskap och forskning samt hur resultaten kommuniceras. Naagra aspekter relaterade till EMF

Energy Technology Data Exchange (ETDEWEB)

Cedervall, Bjoern (Unit of Med. Radiation Physics and Med. Radiation Biology, Dept. Oncology and Pathology, Karolinska Inst., Stockholm (Sweden))

2009-06-15

There are many aspects of the controversy around EMF and potential risks that are largely unknown to the wider audience. Such aspects form the basis for the topics discussed in this report. More specifically focus has been on arguments related to possible cause-effect where linguistic barriers and societal 'filters' (for instance by uncritical media) may constitute a problem. Regardless of whether scientists are working with for example molecular biology or epidemiology they are confronted with a number of methodological problems that may be difficult or even impossible to master. Such difficulties are seldom seen in press releases, news media and so on but they may still be part of many scientists' daily challenges. The most difficult communication challenge is probably that if something is absolutely safe it cannot be proven. An unknown virus, bacterium, or chemical contaminant may completely ruin experiments in a molecular biology experiment but at least the experiments can be repeated and often measures can be taken once such a contamination has been found. For epidemiological studies there is always a specific challenge in that the investigations cannot be repeated as people never do the same things under the same conditions and in a predictable manner. It is with this background and context that the author has chosen to treat some methodological problems in science as well as the so-called Hill's criteria for cause-effects. A shorter comment has been made with reference to various aspects of the precautionary principle as it is often referred to in the EMF debate but most often, however, it has seldom been clarified what is meant by precautionary practices or actions. Precaution is closely related to human fear and therefore a corresponding chapter has been included. This report ends with a few looks into the historical rear-view mirror which illuminates the anticipated benefits with the invisible and mystical rather than the potential

SpoonEMF, une brique logicielle pour l'utilisation de l'IDM dans le cadre de la réingénierie de programmes Java5

OpenAIRE

Barais , Olivier

2006-01-01

2 ième Journée sur l'Ingénièrie Dirigée par les Modèles; Ce document présente succinctement SpoonEMF, une brique logicielle pour l'utilisation de l'IDM dans le cadre de la réingénierie d'applications écrites en Java. L'accent dans cette courte présentation est mis sur les cas d'utilisation possibles de cette brique logicielle et l'intérêt des choix techniques retenus : le framework EMF pour l'expression du méta-modèle afin de favoriser l'interopérabilité avec d'autres outils et l'intégration ...

Numerous Sinusoidal and Other EMF Phenomena, At Present and Former Native American Sites, May Be Superimposing Themselves onto Regional Power Grids.

Science.gov (United States)

Cadran, Lawrence R.; Mc Leod, Roger D.; Mc Leod, David M.

2003-10-01

Periodic electromagnetic field signals (EMF), sometimes noticeable as faint blue-light or other phenomena, frequently are also detected at sites associated with Native Americans. We first noticed this sort of information in the vicinity of Wendell, MA about fourteen years ago. Similar and other signals are apparent at Americas Stonehenge, AS, in North Salem, NH. Connecticut provided our first evidence of superposition of two such waves at the Gungywamp site north of Groton, CT. A Maine location first showed orthogonally oriented trajectories in neighborhoods formerly frequented by Molocket and Metallak and their relatives near Rumford and Rangeley, ME. Florida exhibits similar signals in the vicinity of Hollywood and at Miamis Tequesta instrument, as does a separate site in CT. Powerful thunderstorms in the vicinity of a stone serpent effigy in Ohio cause EMF pulsations. Such signals are possibly superimposing themselves onto power-grids, where frequency changes and system instabilities may occur, according to the elementary physics involved.

Emf measurements on nanocrystalline copper-doped ceria

International Nuclear Information System (INIS)

Knauth, P.; Villain, S.

1998-01-01

Mixed oxide samples of nanostructured Cu x Ce 1-x O 2-y of various composition were generated by (i) chemical precipitation and ball milling and (ii) inert gas condensation. X-ray diffraction measurements suggested that copper oxide was dissolved in nanostructured cerium oxide up to concentrations of x = 0.15. Solid electrolyte cells of the type A, Cu 2 O/CuBr/Cu x Ce 1-x O 2-y (A = Cu or CuO) showed reversible cell voltages. The ratio of the formal chemical activities of CuO and Cu 2 O dissolved in nanostructured cerium oxide were calculated from the cell voltages. The results are discussed in terms of an apparent macroscopic solubility, due to interfacial segregation of copper oxide on nanostructured cerium oxide

ROKO-Database of the environmental radioactivity measurements in Slovenia

International Nuclear Information System (INIS)

Stritar, A.; Mitic, D.

2005-01-01

ROKO is the acronym of the Environmental Radioactivity in Slovenian language R adioaktivnost v OKOlju . Computer database ROKO contains data of all measurements of the radioactivity in the environment in Slovenia. Data about radioactivity in the environment have been collected in Slovenia more or less regularly since 1961 on. Most results are gathered in the form of paper reports. Slovenian Nuclear Safety Administration (SNSA) has initiated the project of transfer of all those data into the electronic form and making it available for easy research. The database is designed so, that it contains all records, relevant for any kind of analyses and for the transfer to the international data systems. By the end of the summer 2005 a major part of data from previous years have already been transferred into the database and the user interface software is under development. It will allow the users to examine individual data records, to plot time history graphs or geographical contour plots. (author)

A comparison of important international and national standards for limiting exposure to EMF including the scientific rationale.

Science.gov (United States)

Roy, Colin R; Martin, Lindsay J

2007-06-01

A comparison of Eastern (from Russia, Hungary, Bulgaria, Poland, and the Czech Republic) and Western (represented by the International Commission on Non-Ionizing Radiation Protection guidelines and the Institute of Electrical and Electronic Engineers standards) radiofrequency standards reveals key differences. The Eastern approach is to protect against non-thermal effects caused by chronic exposure to low level exposure, and the occupational basic restriction is power load (the product of intensity and exposure duration). In contrast, the Western approach is to protect against established acute biological effects that could signal an adverse health effect, and the principal basic restriction is the specific absorption rate to protect against thermal effects. All of the standards are science-based, but a fundamental difference arises from a lack of agreement on the composition of the reference scientific database and of which adverse effect needs to be protected against. However, differences also exist between the ICNIRP and IEEE standards. An additional complication arises when standards are derived or modified using a precautionary approach. For ELF the differences between ICNIRP and IEEE are more fundamental; namely, differences in the basic restriction used (induced current; in-situ electric field) and the location of breakpoints in the strength-frequency curves result in large differences. In 2006, ICNIRP will initiate the review of their ELF and radiofrequency guidelines, and this will provide an opportunity to address differences in standards and the move towards harmonization of EMF standards and guidelines.

Study on the Extremely Low Frequency (ELF) Electromagnetic Field (EMF) emission from overhead High-Voltage Transmission Lines

International Nuclear Information System (INIS)

Parthasarathy, S.R.; Roha Tukimin; Wan Saffiey Wan Abdullah; Zulkifli Yusof; Mohd Azizi Mohd Jali

2016-01-01

The paper highlights the study on the Extremely Low Frequency (ELF) Electromagnetic Field (EMF) emission performed at an overhead 275-kV High-Voltage Transmission Lines. The study comprised of assessment at the transmission lines on 3 different cases and locations in Klang Valley, specifically on a vacant land near the transmission line, inside and around the house at the vicinity of the transmission line and the area directly under the transmission line. The instrument setup and measurement protocols during the assessment were adopted from standard measurement method and procedures stipulated under the Institute of Electrical and Electronics Engineers (IEEE) Standard. The results were compared with the standards recommended in the International Commission on Non-Ionizing Radiation Protection (ICNIRP) guidelines. The results showed that the measured field strengths are within the safety limit with the highest measured exposure was 10.8 % and 1.8 % of the permissible exposure limit for the electric and magnetic field respectively. Both the field strengths were found to drop significantly against distance from the transmission lines where closer distances showed higher field strengths. Furthermore, the study revealed that buildings and other object such as trees and shrubs screen out the electric field, resulting in a lower value at indoor measurements and near the stated objects. In addition, higher value of electric and magnetic field strengths were recorded when assessment was being done directly under the transmission line compared to the lateral measurement. (author)

Environmental Metabolic Footprinting (EMF) vs. half-life: a new and integrative proxy for the discrimination between control and pesticides exposed sediments in order to further characterise pesticides' environmental impact.

Science.gov (United States)

Salvia, Marie-Virginie; Ben Jrad, Amani; Raviglione, Delphine; Zhou, Yuxiang; Bertrand, Cédric

2017-06-28

Pesticides are regularly used for a variety of applications and are disseminated throughout the environment. These substances may have significant negative impacts. To date, the half-life, t 1/2 , was often used to study the fate of pesticides in environmental matrices (water, soil, sediment). However, this value gives limited information. First, it does not evaluate the formation of by-products, resulting in the need for additional experiments to be performed to evaluate biodegradation and biotransformation products. T 1/2 also fails to consider the chemical's impact on biodiversity. Resilience time, a new and integrative proxy, was recently proposed as an alternative to t 1/2 , with the potential to evaluate all the post-application effects of the chemical on the environment. The 'Environmental Metabolic Footprinting' (EMF) approach, giving an idea of the resilience time, was used to evaluate the impact of botanicals on soil. The goal is to optimise the EMF to study the impact of a microbial insecticide, the Bacillus thuringiensis israelensis (Bti), on sediment. The difficulty of this work lies in the commercial solution of Bti that is really complex, and this complexity yields chromatograms that are extremely difficult to interpret; t 1/2 cannot be used. No methodologies currently exist to monitor the impact of these compounds on the environment. We will test the EMF to determine if it is sensitive enough to tolerate such complex mixtures. A pure chemical insecticide, the α-cypermethrin, will be also studied. The article shows that the EMF is able to distinguish meta-metabolome differences between control and exposed (with Bti) sediments.

Nuclear Energy Response in the EMF27 Study

International Nuclear Information System (INIS)

Kim, Son H.; Wada, Kenichi; Kurosawa, Atsushi; Roberts, Matthew

2014-01-01

The nuclear energy response for mitigating global climate change across eighteen participating models of the EMF27 study is investigated. Diverse perspectives on the future role of nuclear power in the global energy system are evident in the broad range of nuclear power contributions from participating models of the study. In the Baseline scenario without climate policy, nuclear electricity generation and shares span 0 - 66 EJ/ year and 0 - 25% in 2100 for all models, with a median nuclear electricity generation of 39 EJ/year (1,389 GWe at 90% capacity factor) and median share of 9%. The role of nuclear energy increased under the climate policy scenarios. The median of nuclear energy use across all models doubled in the 450 ppm CO2e scenario with a nuclear electricity generation of 67 EJ/year (2,352 GWe at 90% capacity factor) and share of 17% in 2100. The broad range of nuclear electricity generation (11 - 214 EJ/year) and shares (2 - 38%) in 2100 of the 450 ppm CO2e scenario reflect differences in the technology choice behavior, technology assumptions and competitiveness of low carbon technologies. Greater clarification of nuclear fuel cycle issues and risk factors associated with nuclear energy use are necessary for understanding the nuclear deployment constraints imposed in models and for improving the assessment of the nuclear energy potential in addressing climate change

Biophysical aspects of the influence of electromagnetic fields (EMF on the human body Influencia de los campos electromagnéticos en el organismo humano: aspectos biofísicos

Directory of Open Access Journals (Sweden)

Napaleon Hernández

1993-03-01

Full Text Available

Some historical aspects of biomagnetism and of the various steps that led to the development of bioelectricity and electro technique are summarized. Alterations observed in individuals working for long periods of time in contact with artificial EMF are described as well as the correlation between natural EMF and accidentality. The utilization of EMF for therapeutic purposes 15 reviewed and some considerations are given to the so called ";bioenergetic medicine"; that employs light, laser, sound, electricity and magnetism. A warning 15 made against the indiscriminate therapeutic use of EMF by practitioners without proper training; the need for solid research which may support the development of this area of medicine Is emphasized.

En este artículo se resumen algunos aspectos históricos del biomagnetismo y de las etapas que condujeron al desarrollo de la bioelectricidad y la electrotécnica. Se describen las alteraciones observadas en quienes trabajan por períodos prolongados en contacto con campos electromagnéticos (CEM artificiales y la correlación entre los CEM naturales y la accidentalidad. Se revisan la utilización de los CEM con fines curativos y la escuela llamada ";bioenergética"; que utiliza terapéuticamente la luz, el láser, el sonido, la electricidad y el magnetismo. Se previene contra el uso terapéutico Indiscriminado de los CEM por personas sin adecuada formación y se hace énfasis en la necesidad de adelantar Investigaciones serias que sustenten este desarrollo de la medicina.

Sickness absence from 1978 to 1992 of Electricite de France (EDF) workers exposed to ELF-EMF: the substation group

International Nuclear Information System (INIS)

Souques, M.; Dab, W.; Lambrozo, J.; Chevalier, A.; Coing, F.

1996-01-01

Electromagnetic fields are suspected of many health effects, including cancers, immunity and fertility disorders, congenital malformations, suicides and depression.... Although the results of all studies are contradictory and no biological mechanism has been found, populations are concerned about this matter. This study analyzes the absence from work of some EDF employees who are a priori the most professionally exposed to ELF EMF. Absence from work is taken as an health indicator. Although it is not specific, it can be predictive of serious health problems. The specific context of EDF has made it possible to collect and analyze the medical aspect of absence from work, that is rare in France. We were interested with employees working with high voltage (over 90 kV). Three job categories have been selected: live line workers, substation maintenance workers and substation exploitation workers (called in the company the ATEX). The first group concerned the live linemen and the results were exposed previously. It appeared they had more accidents at work, but this was more related to the job of lineman rather than to the EMF exposure. Nevertheless, substation workers have an exposure less intensive but longer than live linemen. We present here the result about the absenteeism of the substation workers, maintenance and exploitation. (author)

A Database Management System Application for the Graduate Programs Office of the School of Systems and Logistics. Volume 2. Technical Reference Manual

Science.gov (United States)

1988-09-01

CIT C 15 Name of local city. InCSrATE C 2 Name of local state as tw letter abbreviatiom. SIC ZIP C 10 Loa ZIP code. Five or nine digits . InC_ PHKtE C 15...record: 10 Database Dictimary for C: \\ BASE\\PAS1E.MF Field Nane Type Width Decimal Coments PMSCODE C 2 Third and fourth digits of PAS code. ON C 3...Version: 3.01 Date: 09/01/88 Time: 21:34 Report Libary : C: ASE\\GPO.RP1 Date: 08/28/88 Time: 11:32 PRMNT OFTICNS CflRL-PRINrM Nmber of copies: 1 Starting

Fuzzy Relational Databases: Representational Issues and Reduction Using Similarity Measures.

Science.gov (United States)

Prade, Henri; Testemale, Claudette

1987-01-01

Compares and expands upon two approaches to dealing with fuzzy relational databases. The proposed similarity measure is based on a fuzzy Hausdorff distance and estimates the mismatch between two possibility distributions using a reduction process. The consequences of the reduction process on query evaluation are studied. (Author/EM)

EMF 7 model comparisons: key relationships and parameters

Energy Technology Data Exchange (ETDEWEB)

Hickman, B.G.

1983-12-01

A simplified textbook model of aggregate demand and supply interprets the similarities and differences in the price and income responses of the various EMF 7 models to oil and policy shocks. The simplified model is a marriage of Hicks' classic IS-LM formulation of the Keynesian theory of effective demand with a rudimentary model of aggregate supply, combining a structural Phillips curve for wage determination and a markup theory of price determination. The reduced-form income equation from the fix-price IS-LM model is used to define an aggregate demand (AD) locus in P-Y space, showing alternative pairs of the implicit GNP deflator and real GNP which would simultaneously satisfy the saving-investment identity and the condition for money market equilibrium. An aggregate supply (AS) schedule is derived by a similar reduction of relations between output and labor demand, unemployment and wage inflation, and the wage-price-productivity nexus governing markup pricing. Given a particular econometric model it is possible to derive IS and LM curves algebraically. The resulting locuses would show alternative combinations of interest rate and real income which equilibrate real income identity on the IS side and the demand and supply of money on the LM side. By further substitution the reduced form fix-price income relation could be obtained for direct quantification of the AD locus. The AS schedule is obtainable by algebraic reduction of the structural supply side equations.

Development of a source-exposure matrix for occupational exposure assessment of electromagnetic fields in the INTEROCC study.

Science.gov (United States)

Vila, Javier; Bowman, Joseph D; Figuerola, Jordi; Moriña, David; Kincl, Laurel; Richardson, Lesley; Cardis, Elisabeth

2017-07-01

To estimate occupational exposures to electromagnetic fields (EMF) for the INTEROCC study, a database of source-based measurements extracted from published and unpublished literature resources had been previously constructed. The aim of the current work was to summarize these measurements into a source-exposure matrix (SEM), accounting for their quality and relevance. A novel methodology for combining available measurements was developed, based on order statistics and log-normal distribution characteristics. Arithmetic and geometric means, and estimates of variability and maximum exposure were calculated by EMF source, frequency band and dosimetry type. The mean estimates were weighted by our confidence in the pooled measurements. The SEM contains confidence-weighted mean and maximum estimates for 312 EMF exposure sources (from 0 Hz to 300 GHz). Operator position geometric mean electric field levels for radiofrequency (RF) sources ranged between 0.8 V/m (plasma etcher) and 320 V/m (RF sealer), while magnetic fields ranged from 0.02 A/m (speed radar) to 0.6 A/m (microwave heating). For extremely low frequency sources, electric fields ranged between 0.2 V/m (electric forklift) and 11,700 V/m (high-voltage transmission line-hotsticks), whereas magnetic fields ranged between 0.14 μT (visual display terminals) and 17 μT (tungsten inert gas welding). The methodology developed allowed the construction of the first EMF-SEM and may be used to summarize similar exposure data for other physical or chemical agents.

Artificial Inductance Concept to Compensate Nonlinear Inductance Effects in the Back EMF-Based Sensorless Control Method for PMSM

DEFF Research Database (Denmark)

Lu, Kaiyuan; Lei, Xiao; Blaabjerg, Frede

2013-01-01

The back EMF-based sensorless control method is very popular for permanent magnet synchronous machines (PMSMs) in the medium- to high-speed operation range due to its simple structure. In this speed range, the accuracy of the estimated position is mainly affected by the inductance, which varies...... at different loading conditions due to saturation effects. In this paper, a new concept of using a constant artificial inductance to replace the actual varying machine inductance for position estimation is introduced. This facilitates greatly the analysis of the influence of inductance variation...

An Electromagnetic Gauge Technique for Measuring Shocked Particle Velocity in Electrically Conductive Samples

Science.gov (United States)

Cheng, David; Yoshinaka, Akio

2014-11-01

Electromagnetic velocity (EMV) gauges are a class of film gauges which permit the direct in-situ measurement of shocked material flow velocity. The active sensing element, typically a metallic foil, requires exposure to a known external magnetic field in order to produce motional electromotive force (emf). Due to signal distortion caused by mutual inductance between sample and EMV gauge, this technique is typically limited to shock waves in non-conductive materials. In conductive samples, motional emf generated in the EMV gauge has to be extracted from the measured signal which results from the combined effects of both motional emf and voltage changes from induced currents. An electromagnetic technique is presented which analytically models the dynamics of induced current between a copper disk moving as a rigid body with constant 1D translational velocity toward an EMV gauge, where both disk and gauge are exposed to a uniform external static magnetic field. The disk is modelled as a magnetic dipole loop where its Foucault current is evaluated from the characteristics of the fields, whereas the EMV gauge is modelled as a circuit loop immersed in the field of the magnetic dipole loop, the intensity of which is calculated as a function of space and, implicitly, time. Equations of mutual induction are derived and the current induced in the EMV gauge loop is solved, allowing discrimination of the motional emf. Numerical analysis is provided for the step response of the induced EMV gauge current with respect to the Foucault current in the moving copper sample.

Technical Note: A new global database of trace gases and aerosols from multiple sources of high vertical resolution measurements

Directory of Open Access Journals (Sweden)

G. E. Bodeker

2008-09-01

Full Text Available A new database of trace gases and aerosols with global coverage, derived from high vertical resolution profile measurements, has been assembled as a collection of binary data files; hereafter referred to as the "Binary DataBase of Profiles" (BDBP. Version 1.0 of the BDBP, described here, includes measurements from different satellite- (HALOE, POAM II and III, SAGE I and II and ground-based measurement systems (ozonesondes. In addition to the primary product of ozone, secondary measurements of other trace gases, aerosol extinction, and temperature are included. All data are subjected to very strict quality control and for every measurement a percentage error on the measurement is included. To facilitate analyses, each measurement is added to 3 different instances (3 different grids of the database where measurements are indexed by: (1 geographic latitude, longitude, altitude (in 1 km steps and time, (2 geographic latitude, longitude, pressure (at levels ~1 km apart and time, (3 equivalent latitude, potential temperature (8 levels from 300 K to 650 K and time.

In contrast to existing zonal mean databases, by including a wider range of measurement sources (both satellite and ozonesondes, the BDBP is sufficiently dense to permit calculation of changes in ozone by latitude, longitude and altitude. In addition, by including other trace gases such as water vapour, this database can be used for comprehensive radiative transfer calculations. By providing the original measurements rather than derived monthly means, the BDBP is applicable to a wider range of applications than databases containing only monthly mean data. Monthly mean zonal mean ozone concentrations calculated from the BDBP are compared with the database of Randel and Wu, which has been used in many earlier analyses. As opposed to that database which is generated from regression model fits, the BDBP uses the original (quality controlled measurements with no smoothing applied in any

A database of fragmentation cross section measurements applicable to cosmic ray propagation calculations

International Nuclear Information System (INIS)

Crawford, H.J.; Engelage, J.; Jones, F.C.

1989-08-01

A database of single particle inclusive fragment production cross section measurements has been established and is accessible over common computer networks. These measurements have been obtained from both published literature and direct communication with experimenters and include cross sections for nuclear beams on H, He, and heavier targets, and for H and He beams on nuclear targets, for energies >30 MeV/nucleon. These cross sections are directly applicable to calculations involving cosmic ray nuclear interactions with matter. The data base includes projectile, target, and fragment specifications, beam energy, cross section with uncertainty, literature reference, and comment code. It is continuously updated to assure accuracy and completeness. Also available are widely used semi-empirical formulations for calculating production cross sections and excitation functions. In this paper we discuss the database in detail and describe how it can be accessed. We compare the measurements with semi-empirical calculations and point out areas where improved calculations and further cross section measurements are required. 5 refs., 2 figs

Modelling of BLDCM with a double 3-phase stator winding and back EMF harmonics

Directory of Open Access Journals (Sweden)

Drozdowski Piotr

2015-03-01

Full Text Available In this paper the mathematical model of the brushless DC motor (BLDCM with a double 3-phase stator winding is analysed. Both the 3-phase windings are mutually displaced by 30 electrical degree. Special care has been sacrificed to influence of higher harmonics of induced electromotive forces (EMF on electromagnetic torque and zero sequence voltages that may be used for sensorless control. The mathematical model has been presented in natural variables and, after transformation to symmetrical components, in a vector form. This allows, from one side, for formulating the equivalent circuit suitable for circuit oriented simulators (e.g.: Spice, SimPowerSystems of Simulink and, from the other point of view, for analysis of higher harmonics influence on control possibilities. These considerations have been illustrated with some results of four quadrant operation obtainded due to simulation at automatic control.

Vegetation relevés and soil measurements in the Netherlands: the Ecological Conditions Database (EC)

NARCIS (Netherlands)

Wamelink, G.W.W.; Adrichem, van M.H.C.; Dobben, van H.F.; Frissel, J.Y.; Held, den M.E.; Joosten, V.; Malinowska, A.H.; Slim, P.A.; Wegman, R.M.A.

2012-01-01

Since its establishment around 1990, the Ecological Conditions Database (EC; GIVD ID EU-00-006) has been accumulating vegetation relevés from the Netherlands, each accompanied by at least one abiotic soil measurement (e.g. pH or nutrient availability). On 1-1-2010, the database contained 8,229

Field validation of secondary data sources: a novel measure of representativity applied to a Canadian food outlet database.

Science.gov (United States)

Clary, Christelle M; Kestens, Yan

2013-06-19

Validation studies of secondary datasets used to characterize neighborhood food businesses generally evaluate how accurately the database represents the true situation on the ground. Depending on the research objectives, the characterization of the business environment may tolerate some inaccuracies (e.g. minor imprecisions in location or errors in business names). Furthermore, if the number of false negatives (FNs) and false positives (FPs) is balanced within a given area, one could argue that the database still provides a "fair" representation of existing resources in this area. Yet, traditional validation measures do not relax matching criteria, and treat FNs and FPs independently. Through the field validation of food businesses found in a Canadian database, this paper proposes alternative criteria for validity. Field validation of the 2010 Enhanced Points of Interest (EPOI) database (DMTI Spatial®) was performed in 2011 in 12 census tracts (CTs) in Montreal, Canada. Some 410 food outlets were extracted from the database and 484 were observed in the field. First, traditional measures of sensitivity and positive predictive value (PPV) accounting for every single mismatch between the field and the database were computed. Second, relaxed measures of sensitivity and PPV that tolerate mismatches in business names or slight imprecisions in location were assessed. A novel measure of representativity that further allows for compensation between FNs and FPs within the same business category and area was proposed. Representativity was computed at CT level as ((TPs +|FPs-FNs|)/(TPs+FNs)), with TPs meaning true positives, and |FPs-FNs| being the absolute value of the difference between the number of FNs and the number of FPs within each outlet category. The EPOI database had a "moderate" capacity to detect an outlet present in the field (sensitivity: 54.5%) or to list only the outlets that actually existed in the field (PPV: 64.4%). Relaxed measures of sensitivity and PPV

Database of meteorological and radiation measurements made in Belarus during the first three months following the Chernobyl accident

International Nuclear Information System (INIS)

Drozdovitch, Vladimir; Zhukova, Olga; Germenchuk, Maria; Khrutchinsky, Arkady; Kukhta, Tatiana; Luckyanov, Nickolas; Minenko, Victor; Podgaiskaya, Marina; Savkin, Mikhail; Vakulovsky, Sergey; Voillequé, Paul; Bouville, André

2013-01-01

Results of all available meteorological and radiation measurements that were performed in Belarus during the first three months after the Chernobyl accident were collected from various sources and incorporated into a single database. Meteorological information such as precipitation, wind speed and direction, and temperature in localities were obtained from meteorological station facilities. Radiation measurements include gamma-exposure rate in air, daily fallout, concentration of different radionuclides in soil, grass, cow's milk and water as well as total beta-activity in cow's milk. Considerable efforts were made to evaluate the reliability of the measurements that were collected. The electronic database can be searched according to type of measurement, date, and location. The main purpose of the database is to provide reliable data that can be used in the reconstruction of thyroid doses resulting from the Chernobyl accident. - Highlights: ► Meteorological and radiation measurements done after the Chernobyl accident in Belarus were collected. ► Data were verified and incorporated into a single database. ► Results of this study is being used to improve the thyroid dose estimates after the Chernobyl accident.

On assessing electromagnetic field (300 kmhz – 300mhz in a large industrial city on the basis of 3d modeling and instrumental measuring

Directory of Open Access Journals (Sweden)

I.V. May

2017-09-01

Full Text Available The article dwells on issues of modeling electromagnetic fields levels (EMF with frequency equal to 300 KMHz - 300 MHz which are created by television and radio broadcasting objects, radiolocation, and mobile communication in a large regional cen-ter, in geoinformation system environment. Our task was to estimate EMF levels on areas where apartment blocks were located; to assess energy flows at various floors, to determine zones in a city as per EMF levels; to verify the obtained results with the direct factor measuring. Our calculation included data on 2,011 EMF sources located on a city territory. We allowed for bulk parameters of 31,949 buildings including 17,307 apartment blocks, 3,160 administrative buildings, 307 pre-school children facilities and 105 secondary schools. We performed our calculations in city coordinate system at 109 thousand points. Each calculation created a picture of EMF spread in a plane at a set height which allowed us to determine exposure level at a control point as per "slice" re-sults and to build up a 3D contamination model. Approximately 80% of all the calculated results had EMF parameters within 0.1-10 safety criterion range. We spotted zones with maximum calculated EMF levels at 18-25 meters. Instrumental research proved high factor levels in these zones including those where levels exceeded safety criterion 4-6 times; it makes for certain vigilance in judgments on environmental safety for people who live on the examined territory permanently. The obtained data can be used for foundation of instrumental research points within the frameworks of specific research or social-hygienic monitoring as well as for consequent exposure and health risk assessment. The materials can be used in epidemiologic research for conjugate spatial analysis of energy flows and children and adults mortality.

Setting up an off-site emergency mortuary facility (EMF) to deal with a DVI incident: disaster victim management (DVM).

Science.gov (United States)

Eitzen, David; Zimmermann, Alex

2012-06-01

Forensic mortuaries in all Australian jurisdictions are dealing with increasing workloads, with routine cases regularly occupying greater than 50%, and often as much as 85%, of existing cold room body storage capacity, particularly over long weekends and during seasonal increases in respiratory infections. Hence the need to deal with a sudden influx of deceased persons or multiple body parts in a mass fatality incident would overwhelm most Australian forensic mortuaries, thereby requiring other means of body storage and processing. Exercise "Construct" was a joint South Australian Police (SAPol) and Forensic Science South Australia exercise designed to practice the establishment and construction of an emergency mortuary facility (EMF) to deal with a mass fatality incident and the subsequent disaster victim identification process. The aims of the exercise were to test preparedness, activation and construction processes relative to the establishment of an EMF. The exercise provided the opportunity to identify gaps in the capacity to successfully complete the tasks within the allotted time frames. The exercise reinforced the need to have a comprehensive and clearly documented process which must include a current list of suppliers who can deliver goods and services in a timely manner. The aim of this paper is to report on the exercise findings and share the experience with other jurisdictions. It will also provide other jurisdictions with the opportunity to consider whether the South Australian model will be useful to them in improving their own response when confronted with a mass fatality incident that may overwhelm existing local mortuary capacities and capabilities.

Regularities in electroconductivity and thermo-emf in systems of binary continuous solid solutions of metals

International Nuclear Information System (INIS)

Vedernikov, M.V.; Dvunitkin, V.G.; Zhumagulov, A.

1978-01-01

Given are new experimental data about specific electric resistance of 10 systems of binary continuous solid metal solutions at the temperatures of 293 and 4.2 K: Cr-V, Mo-Nb, Mo-V, Cr-Mo, Nb-V, Ti-Zr, Hf-Zr, Hf-Ti, Sc-Zr, Sc-Hf. For the first time a comparative analysis of all available data on the resistance dependence on the composition of systems of continuous solid solutions, which covers 21 systems, is carried out. The ''resistance-composition'' dependence for such alloy systems is found to be of two types. The dependence of the first type is characteristic of the systems, formed by two isoelectronic metals, the dependence of the second type - for the systems, formed by non-isoelectronic metals. Thermo-emf of each type of solid solutions differently depends on their compositions

Study of heat conductivity, electric conductivity and thermo-emf of BiSrCaCu2Ox and Bi1.82Sr1.73Ca1.73Ca1.25Cu2.2Ox systems

International Nuclear Information System (INIS)

Zhukova, T.B.; Parfen'eva, L.S.; Popov, V.V.; Melekh, B.T.; Smirnov, I.A.; Khalmedov, Kh.M.

1991-01-01

Phase compositions are determined and temperature dependences are measured of x-heat conductivity, ρ-electric resistance and α-thermo-emf of polycrystal, monophase, highly textured HTSC samples of BiSrCaCu 2 O x and Bi 1.82 Sr 1.73 Ca 1.25 Cu 2.2 O x produced through method of direct induction melting in the air in a cold container. Sample 'aging' after storage in the air and vacuum, leading to decrease in the number of foring phases and increase in the basic phase content as well as to change of x, ρ and α coefficients is identified

Radiofrequency electromagnetic field exposure in everyday microenvironments in Europe: A systematic literature review.

Science.gov (United States)

Sagar, Sanjay; Dongus, Stefan; Schoeni, Anna; Roser, Katharina; Eeftens, Marloes; Struchen, Benjamin; Foerster, Milena; Meier, Noëmi; Adem, Seid; Röösli, Martin

2018-03-01

The impact of the introduction and advancement in communication technology in recent years on exposure level of the population is largely unknown. The main aim of this study is to systematically review literature on the distribution of radiofrequency electromagnetic field (RF-EMF) exposure in the everyday environment in Europe and summarize key characteristics of various types of RF-EMF studies conducted in the European countries. We systematically searched the ISI Web of Science for relevant literature published between 1 January 2000 and 30 April 2015, which assessed RF-EMF exposure levels by any of the methods: spot measurements, personal measurement with trained researchers and personal measurement with volunteers. Twenty-one published studies met our eligibility criteria of which 10 were spot measurements studies, 5 were personal measurement studies with trained researchers (microenvironmental), 5 were personal measurement studies with volunteers and 1 was a mixed methods study combining data collected by volunteers and trained researchers. RF-EMF data included in the studies were collected between 2005 and 2013. The mean total RF-EMF exposure for spot measurements in European "Homes" and "Outdoor" microenvironments was 0.29 and 0.54 V/m, respectively. In the personal measurements studies with trained researchers, the mean total RF-EMF exposure was 0.24 V/m in "Home" and 0.76 V/m in "Outdoor". In the personal measurement studies with volunteers, the population weighted mean total RF-EMF exposure was 0.16 V/m in "Homes" and 0.20 V/m in "Outdoor". Among all European microenvironments in "Transportation", the highest mean total RF-EMF 1.96 V/m was found in trains of Belgium during 2007 where more than 95% of exposure was contributed by uplink. Typical RF-EMF exposure levels are substantially below regulatory limits. We found considerable differences between studies according to the type of measurements procedures, which precludes cross

Output, input and productivity measures at the industry level : The EU KLEMS Database

NARCIS (Netherlands)

O'Mahony, M.; Timmer, M.P.

This article describes the contents and the construction of the EU KLEMS Growth and Productivity Accounts. This database contains industry-level measures of output, inputs and productivity for 25 European countries, Japan and the US for the period from 1970 onwards. The article considers the

A precipitation database of station-based daily and monthly measurements for West Africa: Overview, quality control and harmonization

Science.gov (United States)

Bliefernicht, Jan; Waongo, Moussa; Annor, Thompson; Laux, Patrick; Lorenz, Manuel; Salack, Seyni; Kunstmann, Harald

2017-04-01

West Africa is a data sparse region. High quality and long-term precipitation data are often not readily available for applications in hydrology, agriculture, meteorology and other needs. To close this gap, we use multiple data sources to develop a precipitation database with long-term daily and monthly time series. This database was compiled from 16 archives including global databases e.g. from the Global Historical Climatology Network (GHCN), databases from research projects (e.g. the AMMA database) and databases of the national meteorological services of some West African countries. The collection consists of more than 2000 precipitation gauges with measurements dating from 1850 to 2015. Due to erroneous measurements (e.g. temporal offsets, unit conversion errors), missing values and inconsistent meta-data, the merging of this precipitation dataset is not straightforward and requires a thorough quality control and harmonization. To this end, we developed geostatistical-based algorithms for quality control of individual databases and harmonization to a joint database. The algorithms are based on a pairwise comparison of the correspondence of precipitation time series in dependence to the distance between stations. They were tested for precipitation time series from gages located in a rectangular domain covering Burkina Faso, Ghana, Benin and Togo. This harmonized and quality controlled precipitation database was recently used for several applications such as the validation of a high resolution regional climate model and the bias correction of precipitation projections provided the Coordinated Regional Climate Downscaling Experiment (CORDEX). In this presentation, we will give an overview of the novel daily and monthly precipitation database and the algorithms used for quality control and harmonization. We will also highlight the quality of global and regional archives (e.g. GHCN, GSOD, AMMA database) in comparison to the precipitation databases provided by the

Collision Cross Section (CCS) Database: An Additional Measure to Characterize Steroids.

Science.gov (United States)

Hernández-Mesa, Maykel; Le Bizec, Bruno; Monteau, Fabrice; García-Campaña, Ana M; Dervilly-Pinel, Gaud

2018-04-03

Ion mobility spectrometry enhances the performance characteristics of liquid chromatography-mass spectrometry workflows intended to steroid profiling by providing a new separation dimension and a novel characterization parameter, the so-called collision cross section (CCS). This work proposes the first CCS database for 300 steroids (i.e., endogenous, including phase I and phase II metabolites, and exogenous synthetic compounds), which involves 1080 ions and covers the CCS of 127 androgens, 84 estrogens, 50 corticosteroids, and 39 progestagens. This large database provides information related to all the ionized species identified for each steroid in positive electrospray ionization mode as well as for estrogens in negative ionization mode. CCS values have been measured using nitrogen as drift gas in the ion mobility cell. Generally, direct correlation exists between mass-to-charge ratio ( m/ z) and CCS because both are related parameters. However, several steroids mainly steroid glucuronides and steroid esters have been characterized as more compact or elongated molecules than expected. In such cases, CCS results in additional relevant information to retention time and mass spectral data for the identification of steroids. Moreover, several isomeric steroid pairs (e.g., 5β-androstane-3,17-dione and 5α-androstane-3,17-dione) have been separated based on their CCS differences. These results indicate that adding the CCS to databases in analytical workflows increases selectivity, thus improving the confidence in steroids analysis. Consequences in terms of identification and quantification are discussed. Quality criteria and a construction of an interlaboratory reproducibility approach are also reported for the obtained CCS values. The CCS database described here is made publicly available.

Statistical analysis concerning broad band measurements of radio frequency electromagnetic fields

International Nuclear Information System (INIS)

Lubritto, C.; D'Onofrio, A.; Palmieri, A.; Sabbarese, C.; Terrasi, F.; Petraglia, A.; Pinto, G.; Romano, G.

2002-01-01

Electromagnetic fields (EMF) actually represents one of the most common and the fastest growing environmental factors influencing human life. The care of the public community for the so called electromagnetic pollution is continually increasing because of the booming use of mobile phones over the past decade in business, commerce and social life. Moreover the incumbent third generation mobile systems will increase the use of all communication technologies, including fax, e-mail and Internet accesses. This extensive use has been accompanied by public debate about possible adverse effects on human health. In particular there are concerns related to the emission of radiofrequency radiation from the cellular phones and from base stations. Due to this very fast and wide development of cellular telephony more and more data are becoming available from monitoring, measuring and predicting electromagnetic fields as requested by the laws in order to get the authorization to install antenna and apparatus size of the database is such consistent that statistics have been carried out with a high degree of confidence: in particular in this paper statistical analysis has been focussed on data collected during about 1000 check measurements of electromagnetic field values performed by a private company in 167 different located in almost all Italian regions. One of the aim set consist in to find the most critical factors for the measurements, besides the field conformation: position in space, logistic conditions, technology employed, distance from the centre of the antenna, etc. The first step of the study deals with the building of a database fulfilled with information relevant to the measurements. In a second step, by means of appropriate statistical procedures, the electromagnetic field is evaluated and then the different measurement procedures are critically reviewed

Implementation of a consolidated, standardized database of environmental measurements data

International Nuclear Information System (INIS)

James, T.L.

1996-10-01

This report discusses the benefits of a consolidated and standardized database; reasons for resistance to the consolidation of data; implementing a consolidated database, including attempts at standardization, deciding what to include in the consolidated database, establishing lists of valid values, and addressing quality assurance/quality control (QA/QC) issues; and the evolution of a consolidated database, which includes developing and training a user community, resolving configuration control issues, incorporating historical data, identifying emerging standards, and developing pointers to other data. OREIS is used to illustrate these topics

[The electromagnetic fields of the base stations of mobile radio communication and ecology. The estimation of danger of the base station EMF for population and for bioecosystems].

Science.gov (United States)

Grigor'ev, Iu G; Grigor'ev, K A

2005-01-01

The estimation of the danger for the population and for the bioecosistems of the electromagnetic conditions around of the base stations was given. The insufficiency of the scientific knowledge does not allow to guarantee the safety of the population and of the bioecosystems in the conditions of a round-the-clock long-term influence of EMF RF. WHO recommends to use "Precautionary principle".

Ozone Measurements Monitoring Using Data-Based Approach

KAUST Repository

Harrou, Fouzi; Kadri, Farid; Khadraoui, Sofiane; Sun, Ying

2016-01-01

The complexity of ozone (O3) formation mechanisms in the troposphere make the fast and accurate modeling of ozone very challenging. In the absence of a process model, principal component analysis (PCA) has been extensively used as a data-based monitoring technique for highly correlated process variables; however conventional PCA-based detection indices often fail to detect small or moderate anomalies. In this work, we propose an innovative method for detecting small anomalies in highly correlated multivariate data. The developed method combine the multivariate exponentially weighted moving average (MEWMA) monitoring scheme with PCA modelling in order to enhance anomaly detection performance. Such a choice is mainly motivated by the greater ability of the MEWMA monitoring scheme to detect small changes in the process mean. The proposed PCA-based MEWMA monitoring scheme is successfully applied to ozone measurements data collected from Upper Normandy region, France, via the network of air quality monitoring stations. The detection results of the proposed method are compared to that declared by Air Normand air monitoring association.

Ozone Measurements Monitoring Using Data-Based Approach

KAUST Repository

Harrou, Fouzi

2016-02-01

The complexity of ozone (O3) formation mechanisms in the troposphere make the fast and accurate modeling of ozone very challenging. In the absence of a process model, principal component analysis (PCA) has been extensively used as a data-based monitoring technique for highly correlated process variables; however conventional PCA-based detection indices often fail to detect small or moderate anomalies. In this work, we propose an innovative method for detecting small anomalies in highly correlated multivariate data. The developed method combine the multivariate exponentially weighted moving average (MEWMA) monitoring scheme with PCA modelling in order to enhance anomaly detection performance. Such a choice is mainly motivated by the greater ability of the MEWMA monitoring scheme to detect small changes in the process mean. The proposed PCA-based MEWMA monitoring scheme is successfully applied to ozone measurements data collected from Upper Normandy region, France, via the network of air quality monitoring stations. The detection results of the proposed method are compared to that declared by Air Normand air monitoring association.

Development of database on the distribution coefficient. 2. Preparation of database

Energy Technology Data Exchange (ETDEWEB)

Takebe, Shinichi; Abe, Masayoshi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

2001-03-01

The distribution coefficient is very important parameter for environmental impact assessment on the disposal of radioactive waste arising from research institutes. 'Database on the Distribution Coefficient' was built up from the informations which were obtained by the literature survey in the country for these various items such as value , measuring method and measurement condition of distribution coefficient, in order to select the reasonable distribution coefficient value on the utilization of this value in the safety evaluation. This report was explained about the outline on preparation of this database and was summarized as a use guide book of database. (author)

Development of database on the distribution coefficient. 2. Preparation of database

Energy Technology Data Exchange (ETDEWEB)

Takebe, Shinichi; Abe, Masayoshi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

2001-03-01

The distribution coefficient is very important parameter for environmental impact assessment on the disposal of radioactive waste arising from research institutes. 'Database on the Distribution Coefficient' was built up from the informations which were obtained by the literature survey in the country for these various items such as value , measuring method and measurement condition of distribution coefficient, in order to select the reasonable distribution coefficient value on the utilization of this value in the safety evaluation. This report was explained about the outline on preparation of this database and was summarized as a use guide book of database. (author)

A database for storing the results of material radiopurity measurements

Energy Technology Data Exchange (ETDEWEB)

Loach, J.C. [Department of Physics and Astronomy, Shanghai Jiao Tong University, Shanghai 200240 (China); Nuclear Science Division, Lawrence Berkeley National Laboratory, Berkeley, CA94720 (United States); Cooley, J. [Department of Physics, Southern Methodist University, Dallas, TX75275 (United States); Cox, G.A. [Institute for Nuclear Physics, Karlsruhe Institute of Technology, Karlsruhe 76131 (Germany); Li, Z. [Department of Physics and Astronomy, Shanghai Jiao Tong University, Shanghai 200240 (China); Nguyen, K.D.; Poon, A.W.P. [Nuclear Science Division, Lawrence Berkeley National Laboratory, Berkeley, CA94720 (United States)

2016-12-11

Searches for rare nuclear processes, such as neutrinoless double beta-decay and the interactions of WIMP dark matter, are motivating experiments with ever-decreasing levels of radioactive backgrounds. These background reductions are achieved using various techniques, but amongst the most important is minimizing radioactive contamination in the materials from which the experiment is constructed. To this end there have been decades of advances in material sourcing, manufacture and certification, during which researchers have accumulated many thousands of measurements of material radiopurity. Some of these assays are described in publications, others are in databases, but many are still communicated informally. Until this work, there has been no standard format for encoding assay results and no effective, central location for storing them. The aim of this work is to address these long-standing problems by creating a concise and flexible material assay data format and powerful software application to manipulate it. A public installation of this software, available at (http://www.radiopurity.org), is the largest database of assay results ever compiled and is intended as a long-term repository for the community's data.

A database of 10 min average measurements of solar radiation and meteorological variables in Ostrava, Czech Republic

Directory of Open Access Journals (Sweden)

M. Opálková

2018-04-01

Full Text Available A database containing 10 min means of solar irradiance measured on a horizontal plane in several ultraviolet and visible bands from July 2014 to December 2016 at three stations in the area of the city of Ostrava (Czech Republic is presented. The database contains time series of 10 min average irradiances or photosynthetic photon flux densities measured in the following spectral bands: 280–315 nm (UVB; 315–380 nm (UVA; and 400–700 nm (photosynthetically active radiation, PAR; 510–700 nm; 600–700 nm; 610–680 nm; 690–780 nm; 400–1100 nm. A series of meteorological variables including relative air humidity and air temperature at surface is also provided at the same 10 min time step at all three stations, and precipitation is provided for two stations. Air pressure, wind speed, wind direction, and concentrations of air pollutants PM10, SO2, NOx, NO, NO2 were measured at the 1 h time step at the fourth station owned by the Public Health Institute of Ostrava. The details of the experimental sites and instruments used for the measurements are given. Special attention is given to the data quality, and the original approach to the data quality which was established is described in detail. About 130 000 records for each of the three stations are available in the database. This database offers a unique ensemble of variables having a high temporal resolution and it is a reliable source for radiation in relation to environment and vegetation in highly polluted areas of industrial cities in the of northern mid-latitudes. The database has been placed on the PANGAEA repository (https://doi.org/10.1594/PANGAEA.879722 and contains individual data files for each station.

A database of 10 min average measurements of solar radiation and meteorological variables in Ostrava, Czech Republic

Science.gov (United States)

Opálková, Marie; Navrátil, Martin; Špunda, Vladimír; Blanc, Philippe; Wald, Lucien

2018-04-01

A database containing 10 min means of solar irradiance measured on a horizontal plane in several ultraviolet and visible bands from July 2014 to December 2016 at three stations in the area of the city of Ostrava (Czech Republic) is presented. The database contains time series of 10 min average irradiances or photosynthetic photon flux densities measured in the following spectral bands: 280-315 nm (UVB); 315-380 nm (UVA); and 400-700 nm (photosynthetically active radiation, PAR); 510-700 nm; 600-700 nm; 610-680 nm; 690-780 nm; 400-1100 nm. A series of meteorological variables including relative air humidity and air temperature at surface is also provided at the same 10 min time step at all three stations, and precipitation is provided for two stations. Air pressure, wind speed, wind direction, and concentrations of air pollutants PM10, SO2, NOx, NO, NO2 were measured at the 1 h time step at the fourth station owned by the Public Health Institute of Ostrava. The details of the experimental sites and instruments used for the measurements are given. Special attention is given to the data quality, and the original approach to the data quality which was established is described in detail. About 130 000 records for each of the three stations are available in the database. This database offers a unique ensemble of variables having a high temporal resolution and it is a reliable source for radiation in relation to environment and vegetation in highly polluted areas of industrial cities in the of northern mid-latitudes. The database has been placed on the PANGAEA repository (https://doi.org/10.1594/PANGAEA.879722" target="_blank">https://doi.org/10.1594/PANGAEA.879722) and contains individual data files for each station.

Documentation of the U.S. Geological Survey Oceanographic Time-Series Measurement Database

Science.gov (United States)

Montgomery, Ellyn T.; Martini, Marinna A.; Lightsom, Frances L.; Butman, Bradford

2008-01-02

The U.S. Geological Survey (USGS) Oceanographic Time-Series Data Collection (previously named the USGS Oceanographic Time-Series Measurement Database) contains oceanographic observations made as part of studies designed to increase understanding of sediment transport processes and associated dynamics. Analysis of these data has contributed to more accurate prediction of the movement and fate of sediments and other suspended materials in the coastal ocean. The measurements were collected primarily by investigators at the USGS Woods Hole Coastal and Marine Science Center (WHCMSC) and colleagues, beginning in 1975. Most of the field experiments were carried out on the U.S. continental shelf and slope.

Campos electromagnéticos y salud: Exposición a CEM de baja frecuencia en oficinas y laboratorios de computación; Electromagnetic Fields and Health: Exposition to Low Frecuency EMF in Office Areas and Calculating Center

Directory of Open Access Journals (Sweden)

Miguel Castro Fernández

2011-02-01

Full Text Available El interés por establecer los límites de influencia de los campos electromagnéticos (CEM sobre los sereshumanos, y definir los riesgos sobre su salud, es uno de los temas que en la actualidad ocupa a empresasde servicio eléctrico, productores de equipos y empresas de seguros. En este artículo se exponen losresultados de mediciones realizadas en diferentes locaciones donde el ser humano ejecuta su trabajodiariamente; las mediciones consistieron en obtener mapas de campo magnético (CM para diferenteszonas de dichas áreas. Aun cundo los resultados obtenidos no pueden ser considerados definitivos ofrecenpuntos de análisis para el debate de un tema de mucho interés en el mundo actual y, por demás, muypolémico. The interes to stablish limits for Electromagnetics Fields (EMF influence on human being and to definerisk on human health has ocuped the electric services, manufacturers and safe enterprise at presentetime.The results of measurements done in differents place where human being realices his dairy work arepresented in this paper; magnetic field map (MFM for different zones in these places is obtained with themeasurements. Results are not final conclusions, but permit to offer point of view to analysis the problemaof EMF, today some confusse. 

Molten salt e.m.f. cell measurements on U-Ga alloys

International Nuclear Information System (INIS)

Prabhakara Reddy, B.; Kandan, R.; Nagarajan, K.; Vasudeva Rao, P.R.

2000-01-01

The Gibbs free energy of formation of intermetallic compounds, UGa 3 , UGa 2 and U 2 Ga 3 were determined by using high temperature molten salt galvanic cell measurements in the temperature range of 644-988 K, 751-947 K and 800-950 K, respectively. (author)

Study of Belousov—Zhabotinsky oscillators in water—acetonitrile medium employing EMF and EPR techniques with o-vanillin, p-vanillin and adrenaline as substrates

Science.gov (United States)

Lalitha, P. V.; Ramaswamy, R.; Ramakrishnan, Geetha; Rao, P. Sambasiva

1994-12-01

The oscillatory behaviour of three substrates, ortho-vanillin, para-vanillin and adrenaline, in mixed media (water plus 20% acetonitrile) has been investigated using EPR and EMF techniques. All these substrates exhibit two types of oscillation involving Br 2/Br - and Mn(III)/Mn(II) redox couples. From the oscillatory characteristics (total time, number of oscillations and time per oscillation) obtained by employing these techniques, the reactivities of the vanillins have been correlated. The Field—Koros—Noyes mechanism, suggested for catalysed systems in pure aqueous medium, is established to be applicable even in mixed media.

The retrieval of cloud microphysical properties using satellite measurements and an in situ database

Directory of Open Access Journals (Sweden)

C. Poix

1996-01-01

Full Text Available By combining AVHRR data from the NOAA satellites with information from a database of in situ measurements, large-scale maps can be generated of the microphysical parameters most immediately significant for the modelling of global circulation and climate. From the satellite data, the clouds can be classified into cumuliform, stratiform and cirrus classes and then into further sub-classes by cloud top temperature. At the same time a database of in situ measurements made by research aircraft is classified into the same sub-classes and a statistical analysis is used to derive relationships between the sub-classes and the cloud microphysical properties. These two analyses are then linked to give estimates of the microphysical properties of the satellite observed clouds. Examples are given of the application of this technique to derive maps of the probability of occurrence of precipitating clouds and of precipitating water content derived from a case study within the International Cirrus Experiment (ICE held in 1989 over the North Sea.

The retrieval of cloud microphysical properties using satellite measurements and an in situ database

Directory of Open Access Journals (Sweden)

Christophe Poix

Full Text Available By combining AVHRR data from the NOAA satellites with information from a database of in situ measurements, large-scale maps can be generated of the microphysical parameters most immediately significant for the modelling of global circulation and climate. From the satellite data, the clouds can be classified into cumuliform, stratiform and cirrus classes and then into further sub-classes by cloud top temperature. At the same time a database of in situ measurements made by research aircraft is classified into the same sub-classes and a statistical analysis is used to derive relationships between the sub-classes and the cloud microphysical properties. These two analyses are then linked to give estimates of the microphysical properties of the satellite observed clouds. Examples are given of the application of this technique to derive maps of the probability of occurrence of precipitating clouds and of precipitating water content derived from a case study within the International Cirrus Experiment (ICE held in 1989 over the North Sea.

SFCOMPO 2.0 - A relational database of spent fuel isotopic measurements, reactor operational histories, and design data

Science.gov (United States)

Michel-Sendis, Franco; Martinez-González, Jesus; Gauld, Ian

2017-09-01

SFCOMPO-2.0 is a database of experimental isotopic concentrations measured in destructive radiochemical analysis of spent nuclear fuel (SNF) samples. The database includes corresponding design description of the fuel rods and assemblies, relevant operating conditions and characteristics of the host reactors necessary for modelling and simulation. Aimed at establishing a thorough, reliable, and publicly available resource for code and data validation of safety-related applications, SFCOMPO-2.0 is developed and maintained by the OECD Nuclear Energy Agency (NEA). The SFCOMPO-2.0 database is a Java application which is downloadable from the NEA website.

Characteristics of the Na/beta-alumina/Na cell as a sodium vapor pressure sensor

International Nuclear Information System (INIS)

Takikawa, O.; Imai, A.; Harata, M.

1982-01-01

The EMF and voltage-current characteristics for a galvanic cell with the configuration Na vapor (P 1 )/sodium beta-alumina/Na vapor (P 2 ) were studied. It was verified that the EMF followed the Nernst relation over a wide pressure range. For example, when P 1 = 2 x 10 -2 mm Hg and beta-alumina temperature = 340 0 C, the measured EMF agreed with the calculated value in P 2 range from 10 -5 to 10 -2 mm Hg. At lower pressure range, the measured EMF showed a negative deviation. Coexisting argon gas did not influence the cell EMF characteristic. In an atmosphere containing oxygen, the measured EMF was very high at first. Then it decreased and finally approached a value which agreed with the Nernst equation after several hours. At low beta-alumina temperatures, current saturation was observed in the voltage versus current relation with the anode on the P 2 side. Although the sodium pressure could be determined from saturating current measurement, the measurable pressure range was narrower than that for EMF measurement. At high beta-alumina temperature, current saturation was not clear. Values of 6 x 10 -6 (Ω cm) -1 for the electron conductivity and 6 x 10 -10 (Ω cm) -1 for the hole conductivity at 340 0 C were obtained for beta-alumina from the voltage-current characteristics at low sodium pressure. (Auth.)

Analytic-metallurgical application of solid-electrolyts

International Nuclear Information System (INIS)

Sundermann, H.

1976-08-01

The measurement principle and devations are discussed. The activity and distribution coefficients are represented in multinary systems and the appropriate electrochemical-thermodynamical relationships are given of the EMF vs temperature, EMF vs concentration and EMF vs T-C plots in order to restrict the number of chemical calibrations. To define chemically the EMF-T-fields a potentio-coulometric method was established and electronic systems were developed allowing automatic recording of measured values with direct transformation into required analytical data. (orig.) [de

Modeling, Measurements, and Fundamental Database Development for Nonequilibrium Hypersonic Aerothermodynamics

Science.gov (United States)

Bose, Deepak

2012-01-01

The design of entry vehicles requires predictions of aerothermal environment during the hypersonic phase of their flight trajectories. These predictions are made using computational fluid dynamics (CFD) codes that often rely on physics and chemistry models of nonequilibrium processes. The primary processes of interest are gas phase chemistry, internal energy relaxation, electronic excitation, nonequilibrium emission and absorption of radiation, and gas-surface interaction leading to surface recession and catalytic recombination. NASAs Hypersonics Project is advancing the state-of-the-art in modeling of nonequilibrium phenomena by making detailed spectroscopic measurements in shock tube and arcjets, using ab-initio quantum mechanical techniques develop fundamental chemistry and spectroscopic databases, making fundamental measurements of finite-rate gas surface interactions, implementing of detailed mechanisms in the state-of-the-art CFD codes, The development of new models is based on validation with relevant experiments. We will present the latest developments and a roadmap for the technical areas mentioned above

Survey of electromagnetic field exposure in bedrooms of residences in lower Austria.

Science.gov (United States)

Tomitsch, Johannes; Dechant, Engelbert; Frank, Wilhelm

2010-04-01

Previous investigations of exposure to electric, magnetic, or electromagnetic fields (EMF) in households were either about electricity supply EMFs or radio frequency EMFs (RF-EMFs). We report results from spot measurements at the bedside that comprise electrostatic fields, extremely low-frequency electric fields (ELF-EFs), extremely low-frequency magnetic fields (ELF-MFs), and RF-EMFs. Measurements were taken in 226 households throughout Lower Austria. In addition, effects of simple reduction measures (e.g., removal of clock radios or increasing their distance from the bed, turning off Digital Enhanced Cordless Telecommunication (DECT) telephone base stations) were assessed. All measurements were well below International Commission on Non-Ionizing Radiation Protection (ICNIRP) guideline levels. Average night-time ELF-MFs (long-term measurement from 10 pm to 6 am, geometric mean over households) above 100 nT were obtained in 2.3%, and RF-EMFs above 1000 microW/m(2) in 7.1% of households. Highest ELF-EFs were primarily due to lamps beside the bed (max = 166 V/m), and highest ELF-MFs because of transformers of devices (max = 1030 nT) or high current of power lines (max = 380 nT). The highest values of RF-EMFs were caused by DECT telephone base stations (max = 28979 microW/m(2)) and mobile phone base stations (max = 4872 microW/m(2)). Simple reduction measures resulted in an average decrease of 23 nT for ELF-MFs, 23 V/m for ELF-EFs, and 246 microW/m(2) for RF-EMFs. A small but statistically significant correlation between ELF-MF exposure and overall RF-EMF levels of R = 0.16 (P = 0.008) was computed that was independent of type (flat, single family) and location (urban, rural) of houses. (c) 2009 Wiley-Liss, Inc.

Electromagnetic fields from mobile phone base station - variability analysis.

Science.gov (United States)

Bienkowski, Pawel; Zubrzak, Bartlomiej

2015-09-01

The article describes the character of electromagnetic field (EMF) in mobile phone base station (BS) surroundings and its variability in time with an emphasis on the measurement difficulties related to its pulse and multi-frequency nature. Work also presents long-term monitoring measurements performed recently in different locations in Poland - small city with dispersed building development and in major polish city - dense urban area. Authors tried to determine the trends in changing of EMF spectrum analyzing daily changes of measured EMF levels in those locations. Research was performed using selective electromagnetic meters and also EMF meter with spectrum analysis.

Radiofrequency exposure in the Neonatal Medium Care Unit

International Nuclear Information System (INIS)

Calvente, I.; Vázquez-Pérez, A.; Fernández, M.F.; Núñez, M.I.; Múñoz-Hoyos, A.

2017-01-01

The aims of this study were to characterize electromagnetic fields of radiofrequency (RF-EMF) levels generated in a Neonatal Medium Care Unit and to analyze RF-EMF levels inside unit’s incubators. Spot and long-term measurements were made with a dosimeter. The spot measurement mean was 1.51±0.48 V/m. Higher values were found in the proximity to the window and to the incubator evaluated. Mean field strength for the entire period of 17 h was 0.81 (±0.07) V/m and the maximum value was 1.58 V/m for long-term RF-EMF measurements in the incubator. Values found during the night period were higher than those found during the day period. It is important to consider RF-EMF exposure levels in neonatal care units, due to some evidence of adverse health effects found in children and adults. Characterization of RF-EMF exposure may be important to further investigate the mechanisms and underlying effects of electromagnetic fields (EMF) on infant health. A prudent avoidance strategy should be adopted because newborns are at a vulnerable stage of development and the actual impact of EMF on premature infants is unknown. - Highlights: • The increasing use of RF-EMF suggests an urgent need for more research in this field. • Health consequences of RF-EMF exposure on infants are not well known. • Description of RF-EMF exposure is vital in further study mechanisms on infant health. • Considering newborns vulnerability, it is wise to adopt a prudent avoidance strategy.

Radiofrequency exposure in the Neonatal Medium Care Unit

Energy Technology Data Exchange (ETDEWEB)

Calvente, I. [Unit Research Support of the San Cecilio University Hospital, Biosanitary Institute of Granada (ibs.GRANADA), University Hospitals of Granada/University of Granada, Granada (Spain); Department of Radiology and Physical Medicine, School of Medicine, University of Granada, Av. de la Investigación, 11, torre A, planta 11, 18016 Granada (Spain); Vázquez-Pérez, A. [Department of Pediatrics, University of Granada (Spain); Fernández, M.F. [Unit Research Support of the San Cecilio University Hospital, Biosanitary Institute of Granada (ibs.GRANADA), University Hospitals of Granada/University of Granada, Granada (Spain); Department of Radiology and Physical Medicine, School of Medicine, University of Granada, Av. de la Investigación, 11, torre A, planta 11, 18016 Granada (Spain); CIBER en Epidemiología y Salud Pública (CIBERESP) (Spain); Núñez, M.I., E-mail: isabeln@ugr.es [Unit Research Support of the San Cecilio University Hospital, Biosanitary Institute of Granada (ibs.GRANADA), University Hospitals of Granada/University of Granada, Granada (Spain); Department of Radiology and Physical Medicine, School of Medicine, University of Granada, Av. de la Investigación, 11, torre A, planta 11, 18016 Granada (Spain); Biopathology and Regenerative Medicine Institute (IBIMER), University of Granada (Spain); CIBER en Epidemiología y Salud Pública (CIBERESP) (Spain); Múñoz-Hoyos, A. [Department of Pediatrics, University of Granada (Spain)

2017-01-15

The aims of this study were to characterize electromagnetic fields of radiofrequency (RF-EMF) levels generated in a Neonatal Medium Care Unit and to analyze RF-EMF levels inside unit’s incubators. Spot and long-term measurements were made with a dosimeter. The spot measurement mean was 1.51±0.48 V/m. Higher values were found in the proximity to the window and to the incubator evaluated. Mean field strength for the entire period of 17 h was 0.81 (±0.07) V/m and the maximum value was 1.58 V/m for long-term RF-EMF measurements in the incubator. Values found during the night period were higher than those found during the day period. It is important to consider RF-EMF exposure levels in neonatal care units, due to some evidence of adverse health effects found in children and adults. Characterization of RF-EMF exposure may be important to further investigate the mechanisms and underlying effects of electromagnetic fields (EMF) on infant health. A prudent avoidance strategy should be adopted because newborns are at a vulnerable stage of development and the actual impact of EMF on premature infants is unknown. - Highlights: • The increasing use of RF-EMF suggests an urgent need for more research in this field. • Health consequences of RF-EMF exposure on infants are not well known. • Description of RF-EMF exposure is vital in further study mechanisms on infant health. • Considering newborns vulnerability, it is wise to adopt a prudent avoidance strategy.

North American Natural Gas Markets: Selected technical studies

International Nuclear Information System (INIS)

Huntington, H.G.; Schuler, G.E.

1989-04-01

The Energy Modeling Forum (EMF) was established in 1976 at Stanford University to provide a structural framework within which energy experts, analysts, and policymakers could meet to improve their understanding of critical energy problems. The ninth EMF study, North American Natural Gas Markets, was conducted by a working group comprised of leading natural gas analysts and decision-makers from government, private companies, universities, and research and consulting organizations. The EMF 9 working group met five times from October 1986 through June 1988 to discuss key issues and analyze natural gas markets. This third volume includes technical papers that support many of the conclusions discussed in the EMF 9 summary report (Volume 1) and full working group report (Volume 2). These papers discuss the results from the individual models as well as some nonmodeling analysis related to US natural gas imports and industrial natural gas demand. Individual papers have been processed separately for inclusion in the Energy Science and Technology Database

North American Natural Gas Markets: Selected technical studies. Volume 3

Energy Technology Data Exchange (ETDEWEB)

Huntington, H.G.; Schuler, G.E. [eds.

1989-04-01

The Energy Modeling Forum (EMF) was established in 1976 at Stanford University to provide a structural framework within which energy experts, analysts, and policymakers could meet to improve their understanding of critical energy problems. The ninth EMF study, North American Natural Gas Markets, was conducted by a working group comprised of leading natural gas analysts and decision-makers from government, private companies, universities, and research and consulting organizations. The EMF 9 working group met five times from October 1986 through June 1988 to discuss key issues and analyze natural gas markets. This third volume includes technical papers that support many of the conclusions discussed in the EMF 9 summary report (Volume 1) and full working group report (Volume 2). These papers discuss the results from the individual models as well as some nonmodeling analysis related to US natural gas imports and industrial natural gas demand. Individual papers have been processed separately for inclusion in the Energy Science and Technology Database.

North American Natural Gas Markets: Selected technical studies

Energy Technology Data Exchange (ETDEWEB)

Huntington, H.G.; Schuler, G.E. (eds.)

1989-04-01

The Energy Modeling Forum (EMF) was established in 1976 at Stanford University to provide a structural framework within which energy experts, analysts, and policymakers could meet to improve their understanding of critical energy problems. The ninth EMF study, North American Natural Gas Markets, was conducted by a working group comprised of leading natural gas analysts and decision-makers from government, private companies, universities, and research and consulting organizations. The EMF 9 working group met five times from October 1986 through June 1988 to discuss key issues and analyze natural gas markets. This third volume includes technical papers that support many of the conclusions discussed in the EMF 9 summary report (Volume 1) and full working group report (Volume 2). These papers discuss the results from the individual models as well as some nonmodeling analysis related to US natural gas imports and industrial natural gas demand. Individual papers have been processed separately for inclusion in the Energy Science and Technology Database.

SFCOMPO 2.0 – A relational database of spent fuel isotopic measurements, reactor operational histories, and design data

Directory of Open Access Journals (Sweden)

Michel-Sendis Franco

2017-01-01

Full Text Available SFCOMPO-2.0 is a database of experimental isotopic concentrations measured in destructive radiochemical analysis of spent nuclear fuel (SNF samples. The database includes corresponding design description of the fuel rods and assemblies, relevant operating conditions and characteristics of the host reactors necessary for modelling and simulation. Aimed at establishing a thorough, reliable, and publicly available resource for code and data validation of safety-related applications, SFCOMPO-2.0 is developed and maintained by the OECD Nuclear Energy Agency (NEA. The SFCOMPO-2.0 database is a Java application which is downloadable from the NEA website.

MTF Database: A Repository of Students' Academic Performance Measurements for the Development of Techniques for Evaluating Team Functioning

Science.gov (United States)

Hsiung, Chin-Min; Zheng, Xiang-Xiang

2015-01-01

The Measurements for Team Functioning (MTF) database contains a series of student academic performance measurements obtained at a national university in Taiwan. The measurements are acquired from unit tests and homework tests performed during a core mechanical engineering course, and provide an objective means of assessing the functioning of…

Risk assessment of exposure to mechanical vibrations: comparison between field measurements and use of databases

International Nuclear Information System (INIS)

Monica, L.; Nataletti, P.; Vignali, G.

2008-01-01

Despite continuous technological progress with a view to guaranteeing workers' safety and health, there are still many hazardous situations to workers' health when using industrial equipment; exposure to mechanical vibrations may definitely be included among these situations. Many researches have shown that the widespread use of various vibrating tools in the industrial, agricultural and forestry fields, such as vehicles and machinery in the workplace, are a source of vibration disorders or the worsening of pre-existing symptoms.The aim of this paper is to present a comparison between the two types of risk assessment currently provided for by the law: direct field measurements and database support. We will identify the advantages and operational limitations involved in the use of databases through the results of direct field measurements assessing the risk derived from vibrations in a typical engineering company in the mineral waters and beverages industry. As a result, this research can represent a functional reference for risk assessments of vibration exposure in individual companies

Breach Risk Magnitude: A Quantitative Measure of Database Security.

Science.gov (United States)

Yasnoff, William A

2016-01-01

A quantitative methodology is described that provides objective evaluation of the potential for health record system breaches. It assumes that breach risk increases with the number of potential records that could be exposed, while it decreases when more authentication steps are required for access. The breach risk magnitude (BRM) is the maximum value for any system user of the common logarithm of the number of accessible database records divided by the number of authentication steps needed to achieve such access. For a one million record relational database, the BRM varies from 5.52 to 6 depending on authentication protocols. For an alternative data architecture designed specifically to increase security by separately storing and encrypting each patient record, the BRM ranges from 1.3 to 2.6. While the BRM only provides a limited quantitative assessment of breach risk, it may be useful to objectively evaluate the security implications of alternative database organization approaches.

General Practitioners' Knowledge and Concern about Electromagnetic Fields

DEFF Research Database (Denmark)

Berg-Beckhoff, Gabriele; Breckenkamp, Jürgen; Larsen, Pia Veldt

2014-01-01

Our aim is to explore general practitioners' (GPs') knowledge about EMF, and to assess whether different knowledge structures are related to the GPs' concern about EMF. Random samples were drawn from lists of GPs in Germany in 2008. Knowledge about EMF was assessed by seven items. A latent class...... analysis was conducted to identify latent structures in GPs' knowledge. Further, the GPs' concern about EMF health risk was measured using a score comprising six items. The association between GPs' concern about EMF and their knowledge was analysed using multiple linear regression. In total 435 (response...... "don't know". There was no association between GPs' latent knowledge classes or between the number of correct answers given by the GPs and their EMF concern, whereas the number of incorrect answers was associated with EMF concern. Greater EMF concern in subjects with more incorrect answers suggests...

Dry calibration of electromagnetic flowmeters based on numerical models combining multiple physical phenomena (multiphysics)

Science.gov (United States)

Fu, X.; Hu, L.; Lee, K. M.; Zou, J.; Ruan, X. D.; Yang, H. Y.

2010-10-01

This paper presents a method for dry calibration of an electromagnetic flowmeter (EMF). This method, which determines the voltage induced in the EMF as conductive liquid flows through a magnetic field, numerically solves a coupled set of multiphysical equations with measured boundary conditions for the magnetic, electric, and flow fields in the measuring pipe of the flowmeter. Specifically, this paper details the formulation of dry calibration and an efficient algorithm (that adaptively minimizes the number of measurements and requires only the normal component of the magnetic flux density as boundary conditions on the pipe surface to reconstruct the magnetic field involved) for computing the sensitivity of EMF. Along with an in-depth discussion on factors that could significantly affect the final precision of a dry calibrated EMF, the effects of flow disturbance on measuring errors have been experimentally studied by installing a baffle at the inflow port of the EMF. Results of the dry calibration on an actual EMF were compared against flow-rig calibration; excellent agreements (within 0.3%) between dry calibration and flow-rig tests verify the multiphysical computation of the fields and the robustness of the method. As requiring no actual flow, the dry calibration is particularly useful for calibrating large-diameter EMFs where conventional flow-rig methods are often costly and difficult to implement.

Quality-controlled sea surface temperature, salinity and other measurements from the NCEI Global Thermosalinographs Database (NCEI-TSG)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This collection contains global in-situ sea surface temperature (SST), salinity (SSS) and other measurements from the NOAA NCEI Global Thermosalinographs Database...

Radiofrequency exposure in the Neonatal Medium Care Unit.

Science.gov (United States)

Calvente, I; Vázquez-Pérez, A; Fernández, M F; Núñez, M I; Múñoz-Hoyos, A

2017-01-01

The aims of this study were to characterize electromagnetic fields of radiofrequency (RF-EMF) levels generated in a Neonatal Medium Care Unit and to analyze RF-EMF levels inside unit's incubators. Spot and long-term measurements were made with a dosimeter. The spot measurement mean was 1.51±0.48V/m. Higher values were found in the proximity to the window and to the incubator evaluated. Mean field strength for the entire period of 17h was 0.81 (±0.07)V/m and the maximum value was 1.58V/m for long-term RF-EMF measurements in the incubator. Values found during the night period were higher than those found during the day period. It is important to consider RF-EMF exposure levels in neonatal care units, due to some evidence of adverse health effects found in children and adults. Characterization of RF-EMF exposure may be important to further investigate the mechanisms and underlying effects of electromagnetic fields (EMF) on infant health. A prudent avoidance strategy should be adopted because newborns are at a vulnerable stage of development and the actual impact of EMF on premature infants is unknown. Copyright © 2016 Elsevier Inc. All rights reserved.

Application of microwave cell system in calibration of electromagnetic field meters

International Nuclear Information System (INIS)

Abu-Kassem, I.

2012-11-01

The aim of this work is to improve radiation measurements of electromagnetic field (EMF) through realizing tests and calibrations of measurement devices by intercomparison within the microwaves (MW) range according to EMF wave cell properties. Actually, the calibration facility in electromagnetic field is not available in Syria; therefore, realizing an experimental system for electromagnetic field radiometer calibration is very important at national level. This study showed the possibility of using EMF wave cell in intercomparison of electromagnetic field radiometers in order to achieve a direct calibration via standard radiometer. The EMF wave cell properties were studied and the homogeneity of its EMF was tested using the EF Cube probe. Results showed that the field homogeneity inside the cell is good and the variation of electric field strength, within the comparison position, is less than 10% of measured values. It was recognized that the probe form and dimensions influence the comparison results; and measurement results showed that it's possible to achieve comparison in the working domain of EMF wave cell (10 - 3000 MHz) with a relative deviation of result values between 10% and 30% according to the measurement device and frequency range. Development of comparison process in order to obtain accurate results needs to improve mechanical supports of tested probes and to introduce a correction factor related to studied probe form and dimensions. From another side, it is better to carry out measurements at frequencies around the central frequency, and not close to frequency range borders, of the EMF wave cell working frequency domain. (author)

Database Replication Prototype

OpenAIRE

Vandewall, R.

2000-01-01

This report describes the design of a Replication Framework that facilitates the implementation and com-parison of database replication techniques. Furthermore, it discusses the implementation of a Database Replication Prototype and compares the performance measurements of two replication techniques based on the Atomic Broadcast communication primitive: pessimistic active replication and optimistic active replication. The main contributions of this report can be split into four parts....

Artificial Radionuclides Database in the Pacific Ocean: HAM Database

Directory of Open Access Journals (Sweden)

Michio Aoyama

2004-01-01

Full Text Available The database “Historical Artificial Radionuclides in the Pacific Ocean and its Marginal Seas”, or HAM database, has been created. The database includes 90Sr, 137Cs, and 239,240Pu concentration data from the seawater of the Pacific Ocean and its marginal seas with some measurements from the sea surface to the bottom. The data in the HAM database were collected from about 90 literature citations, which include published papers; annual reports by the Hydrographic Department, Maritime Safety Agency, Japan; and unpublished data provided by individuals. The data of concentrations of 90Sr, 137Cs, and 239,240Pu have been accumulating since 1957–1998. The present HAM database includes 7737 records for 137Cs concentration data, 3972 records for 90Sr concentration data, and 2666 records for 239,240Pu concentration data. The spatial variation of sampling stations in the HAM database is heterogeneous, namely, more than 80% of the data for each radionuclide is from the Pacific Ocean and the Sea of Japan, while a relatively small portion of data is from the South Pacific. This HAM database will allow us to use these radionuclides as significant chemical tracers for oceanographic study as well as the assessment of environmental affects of anthropogenic radionuclides for these 5 decades. Furthermore, these radionuclides can be used to verify the oceanic general circulation models in the time scale of several decades.

Magnetic fluctuation induced transport and edge dynamo measurements in the MST reversed-field pinch

International Nuclear Information System (INIS)

Hokin, S.; Fiksel, G.; Ji, H.

1994-09-01

Probe measurements in MST indicate that RFP particle and energy loss is governed by magnetic fluctuations inside r/a = 0.8, with energy carried out convectively by superthermal electrons. The radial loss rate is lower than the Rechester-Rosenbluth level, presumably due to the establishment of a restraining ambipolar potential. Several aspects of these measurements contradict the Kinetic Dynamo Theory, while the MHD dynamo EMF is measured to be large enough to drive the edge current carried by these superthermal electrons

The CAPEC Database

DEFF Research Database (Denmark)

Nielsen, Thomas Lund; Abildskov, Jens; Harper, Peter Mathias

2001-01-01

in the compound. This classification makes the CAPEC database a very useful tool, for example, in the development of new property models, since properties of chemically similar compounds are easily obtained. A program with efficient search and retrieval functions of properties has been developed.......The Computer-Aided Process Engineering Center (CAPEC) database of measured data was established with the aim to promote greater data exchange in the chemical engineering community. The target properties are pure component properties, mixture properties, and special drug solubility data....... The database divides pure component properties into primary, secondary, and functional properties. Mixture properties are categorized in terms of the number of components in the mixture and the number of phases present. The compounds in the database have been classified on the basis of the functional groups...

Thermoelectric and Hall-effect studies in hydrogenerated nickel foils

International Nuclear Information System (INIS)

Rani, R.; Nigam, A.N.

1978-01-01

Thermo e.m.f. and Hall constant of hydrogenerated nickel foils have been measured. Termo e.m.f. shows a sign reversal which is not due to the change in sign of the charge carriers, as indicated by the Hall-effect measurements. To account for the sign reversal of thermo e.m.f., it is found necessary to take into account the surface states of chemisorbed hydrogen on nickel

Optical measurements of paintings and the creation of an artwork database for authenticity.

Directory of Open Access Journals (Sweden)

Seonhee Hwang

Full Text Available Paintings have high cultural and commercial value, so that needs to be preserved. Many techniques have been attempted to analyze properties of paintings, including X-ray analysis and optical coherence tomography (OCT methods, and enable conservation of paintings from forgeries. In this paper, we suggest a simple and accurate optical analysis system to protect them from counterfeit which is comprised of fiber optics reflectance spectroscopy (FORS and line laser-based topographic analysis. The system is designed to fully cover the whole area of paintings regardless of its size for the accurate analysis. For additional assessments, a line laser-based high resolved OCT was utilized. Some forgeries were created by the experts from the three different styles of genuine paintings for the experiments. After measuring surface properties of paintings, we could observe the results from the genuine works and the forgeries have the distinctive characteristics. The forgeries could be distinguished maximally 76.5% with obtained RGB spectra by FORS and 100% by topographic analysis. Through the several executions, the reliability of the system was confirmed. We could verify that the measurement system is worthwhile for the conservation of the valuable paintings. To store the surface information of the paintings in micron scale, we created a numerical database. Consequently, we secured the databases of three different famous Korean paintings for accurate authenticity.

Comparison of several databases of downward solar daily irradiation data at ocean surface with PIRATA measurements

Science.gov (United States)

Trolliet, Mélodie; Wald, Lucien

2017-04-01

The solar radiation impinging at sea surface is an essential variable in climate system. There are several means to assess the daily irradiation at surface, such as pyranometers aboard ship or on buoys, meteorological re-analyses and satellite-derived databases. Among the latter, assessments made from the series of geostationary Meteosat satellites offer synoptic views of the tropical and equatorial Atlantic Ocean every 15 min with a spatial resolution of approximately 5 km. Such Meteosat-derived databases are fairly recent and the quality of the estimates of the daily irradiation must be established. Efforts have been made for the land masses and must be repeated for the Atlantic Ocean. The Prediction and Research Moored Array in the Tropical Atlantic (PIRATA) network of moorings in the Tropical Atlantic Ocean is considered as a reference for oceanographic data. It consists in 17 long-term Autonomous Temperature Line Acquisition System (ATLAS) buoys equipped with sensors to measure near-surface meteorological and subsurface oceanic parameters, including downward solar irradiation. Corrected downward solar daily irradiation from PIRATA were downloaded from the NOAA web site and were compared to several databases: CAMS RAD, HelioClim-1, HelioClim-3 v4 and HelioClim-3 v5. CAMS-RAD, the CAMS radiation service, combines products of the Copernicus Atmosphere Monitoring Service (CAMS) on gaseous content and aerosols in the atmosphere together with cloud optical properties deduced every 15 min from Meteosat imagery to supply estimates of the solar irradiation. Part of this service is the McClear clear sky model that provides estimates of the solar irradiation that should be observed in cloud-free conditions. The second and third databases are HelioClim-1 and HelioClim-3 v4 that are derived from Meteosat images using the Heliosat-2 method and the ESRA clear sky model, based on the Linke turbidity factor. HelioClim-3 v5 is the fourth database and differs from v4 by the

Design of a Low Cost Smart Dryer Temperature Measurement System for Tea Factories

Directory of Open Access Journals (Sweden)

Utpal SARMA

2009-09-01

Full Text Available This paper presents the design of a low cost smart dryer temperature measurement system for Tea Factories using K-type Thermocouple implementing linearization polynomial. The thermo emf is amplified by an instrumentation amplifier having high CMRR (106 dB and high input impedance (1012 Ohm. The analog signal is converted to digital form with the help of an SPI compatible 12-bit ADC. Data acquisition and transmission is done with an 8- bit microcontroller. As the dependence of thermo emf on temperature is not linear hence it is fitted with a polynomial. NIST data for K-type TC is taken as a standard for this fitting. The error with linear fit and polynomial fit is also presented. The digital data is corrected according to the polynomial and sent to a PC located at a remote control room for monitoring and data logging via RS232C communication. The performance of the entire system is discussed in the paper.

A 25-month database of stratus cloud properties generated from ground-based measurements at the Atmospheric Radiation Measurement Southern Great Plains Site

International Nuclear Information System (INIS)

Dong, Xiquan; Minnis, Patrick; Ackerman, Thomas P.; Clothiaux, Eugene E.; Mace, Gerald G.; Long, Charles N.; Liljegren, James C.

2000-01-01

A 25-month database of the macrophysical, microphysical, and radiative properties of isolated and overcast low-level stratus clouds has been generated using a newly developed parameterization and surface measurements from the Atmospheric Radiation Measurement central facility in Oklahoma. The database (5-min resolution) includes two parts: measurements and retrievals. The former consist of cloud base and top heights, layer-mean temperature, cloud liquid water path, and solar transmission ratio measured by a ground-based lidar/ceilometer and radar pair, radiosondes, a microwave radiometer, and a standard Eppley precision spectral pyranometer, respectively. The retrievals include the cloud-droplet effective radius and number concentration and broadband shortwave optical depth and cloud and top-of-atmosphere albedos. Stratus without any overlying mid or high-level clouds occurred most frequently during winter and least often during summer. Mean cloud-layer altitudes and geometric thicknesses were higher and greater, respectively, in summer than in winter. Both quantities are positively correlated with the cloud-layer mean temperature. Mean cloud-droplet effective radii range from 8.1 μm in winter to 9.7 μm during summer, while cloud-droplet number concentrations during winter are nearly twice those in summer. Since cloud liquid water paths are almost the same in both seasons, cloud optical depth is higher during the winter, leading to greater cloud albedos and lower cloud transmittances. (c) 2000 American Geophysical Union

Database Description - Trypanosomes Database | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available List Contact us Trypanosomes Database Database Description General information of database Database name Trypanosomes Database...stitute of Genetics Research Organization of Information and Systems Yata 1111, Mishima, Shizuoka 411-8540, JAPAN E mail: Database...y Name: Trypanosoma Taxonomy ID: 5690 Taxonomy Name: Homo sapiens Taxonomy ID: 9606 Database description The... Article title: Author name(s): Journal: External Links: Original website information Database maintenance s...DB (Protein Data Bank) KEGG PATHWAY Database DrugPort Entry list Available Query search Available Web servic

Implementing the EMF 9 gas trade scenarios and interpreting the results

International Nuclear Information System (INIS)

Rowse, J.

1989-01-01

Detailed description of the model employed appears in Rowse (1986) and the Appendix of Rowse (1987). Only the salient features are discussed here, along with the modifications carried out for the EMF scenarios and certain specific data and assumptions important for understanding the empirical results. The nonlinear programming model has seven Canadian regions, pipeline links to three US regions, twenty-five three-year time periods representing 1986-2060, and perfect foresight in allocating gas to domestic and export regions. It determines equilibrium Canadian consumption levels, Canadian supplies and exports to the US over this time frame by solving for equilibrium prices. Figure 1 indicates the regional breakdown employed, with the principal supply regions lying in Western Canada. Ontario is the principal consuming region in Canada. Prospective supplies and their locations are also indicated in Figure 1. All producing provinces of Western Canada have existing and prospective conventional supplies of gas, while prospective nonconventional supplies are confied to Alberta. Nonconventional or Deep Basin supplies are assumed available only by the mid-1990's at the earliest because they have not previously been commercially produced. Prospective supplies are also assumed available from the Mackenzie Delta/Beaufort Sea area - henceforth simply Delta - but only by the mid-1990's as well due to the lead time necessary for pipeline construction and for industry confidence in the financial viability of megaprojects to recover. Delta gas is shown as a prospective Alberta source because, if developed, it will likely be pipelined south to connect with the existing transportation network in Alberta. Both nonconventional gas and Delta gas are more costly than future conventional gas supplies but the latter can only be introduced gradually over time because of constraints on gas finding rates and expansion of the domestic drilling rig fleet

General practitioners' knowledge and concern about electromagnetic fields.

Science.gov (United States)

Berg-Beckhoff, Gabriele; Breckenkamp, Jürgen; Larsen, Pia Veldt; Kowall, Bernd

2014-12-01

Our aim is to explore general practitioners' (GPs') knowledge about EMF, and to assess whether different knowledge structures are related to the GPs' concern about EMF. Random samples were drawn from lists of GPs in Germany in 2008. Knowledge about EMF was assessed by seven items. A latent class analysis was conducted to identify latent structures in GPs' knowledge. Further, the GPs' concern about EMF health risk was measured using a score comprising six items. The association between GPs' concern about EMF and their knowledge was analysed using multiple linear regression. In total 435 (response rate 23.3%) GPs participated in the study. Four groups were identified by the latent class analysis: 43.1% of the GPs gave mainly correct answers; 23.7% of the GPs answered low frequency EMF questions correctly; 19.2% answered only the questions relating EMF with health risks, and 14.0% answered mostly "don't know". There was no association between GPs' latent knowledge classes or between the number of correct answers given by the GPs and their EMF concern, whereas the number of incorrect answers was associated with EMF concern. Greater EMF concern in subjects with more incorrect answers suggests paying particular attention to misconceptions regarding EMF in risk communication.

Database on wind characteristics

Energy Technology Data Exchange (ETDEWEB)

Hansen, K.S. [The Technical Univ. of Denmark (Denmark); Courtney, M.S. [Risoe National Lab., (Denmark)

1999-08-01

The organisations that participated in the project consists of five research organisations: MIUU (Sweden), ECN (The Netherlands), CRES (Greece), DTU (Denmark), Risoe (Denmark) and one wind turbine manufacturer: Vestas Wind System A/S (Denmark). The overall goal was to build a database consisting of a large number of wind speed time series and create tools for efficiently searching through the data to select interesting data. The project resulted in a database located at DTU, Denmark with online access through the Internet. The database contains more than 50.000 hours of measured wind speed measurements. A wide range of wind climates and terrain types are represented with significant amounts of time series. Data have been chosen selectively with a deliberate over-representation of high wind and complex terrain cases. This makes the database ideal for wind turbine design needs but completely unsuitable for resource studies. Diversity has also been an important aim and this is realised with data from a large range of terrain types; everything from offshore to mountain, from Norway to Greece. (EHS)

A global database with parallel measurements to study non-climatic changes

Science.gov (United States)

Venema, Victor; Auchmann, Renate; Aguilar, Enric; Auer, Ingeborg; Azorin-Molina, Cesar; Brandsma, Theo; Brunetti, Michele; Dienst, Manuel; Domonkos, Peter; Gilabert, Alba; Lindén, Jenny; Milewska, Ewa; Nordli, Øyvind; Prohom, Marc; Rennie, Jared; Stepanek, Petr; Trewin, Blair; Vincent, Lucie; Willett, Kate; Wolff, Mareile

2016-04-01

In this work we introduce the rationale behind the ongoing compilation of a parallel measurements database, in the framework of the International Surface Temperatures Initiative (ISTI) and with the support of the World Meteorological Organization. We intend this database to become instrumental for a better understanding of inhomogeneities affecting the evaluation of long-term changes in daily climate data. Long instrumental climate records are usually affected by non-climatic changes, due to, e.g., (i) station relocations, (ii) instrument height changes, (iii) instrumentation changes, (iv) observing environment changes, (v) different sampling intervals or data collection procedures, among others. These so-called inhomogeneities distort the climate signal and can hamper the assessment of long-term trends and variability of climate. Thus to study climatic changes we need to accurately distinguish non-climatic and climatic signals. The most direct way to study the influence of non-climatic changes on the distribution and to understand the reasons for these biases is the analysis of parallel measurements representing the old and new situation (in terms of e.g. instruments, location, different radiation shields, etc.). According to the limited number of available studies and our understanding of the causes of inhomogeneity, we expect that they will have a strong impact on the tails of the distribution of air temperatures and most likely of other climate elements. Our abilities to statistically homogenize daily data will be increased by systematically studying different causes of inhomogeneity replicated through parallel measurements. Current studies of non-climatic changes using parallel data are limited to local and regional case studies. However, the effect of specific transitions depends on the local climate and the most interesting climatic questions are about the systematic large-scale biases produced by transitions that occurred in many regions. Important

Database Description - SKIP Stemcell Database | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available List Contact us SKIP Stemcell Database Database Description General information of database Database name SKIP Stemcell Database...rsity Journal Search: Contact address http://www.skip.med.keio.ac.jp/en/contact/ Database classification Human Genes and Diseases Dat...abase classification Stemcell Article Organism Taxonomy Name: Homo sapiens Taxonomy ID: 9606 Database...ks: Original website information Database maintenance site Center for Medical Genetics, School of medicine, ...lable Web services Not available URL of Web services - Need for user registration Not available About This Database Database

Database Description - Arabidopsis Phenome Database | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available List Contact us Arabidopsis Phenome Database Database Description General information of database Database n... BioResource Center Hiroshi Masuya Database classification Plant databases - Arabidopsis thaliana Organism T...axonomy Name: Arabidopsis thaliana Taxonomy ID: 3702 Database description The Arabidopsis thaliana phenome i...heir effective application. We developed the new Arabidopsis Phenome Database integrating two novel database...seful materials for their experimental research. The other, the “Database of Curated Plant Phenome” focusing

Thermodynamic studies of hydriodic acid in ethylene glycol-water mixtures from electromotive force measurements

International Nuclear Information System (INIS)

Elsemongy, M.M.; Abdel-Khalek, A.A.

1983-01-01

The standard potentials of the Ag-AgI electrode in twenty ethylene glycol-water mixtures covering the whole range of solvent composition have been determined from the e.m.f. measurements of the cell Pt|H 2 (g, 1atm)| HOAc(m 1 ), NaOAc(m 2 ), KI(m 3 ), solvent|AgI|Ag at nine different temperatures ranging from 15 to 55 0 C. The temperature variation of the standard e.m.f. has been utilized to compute the standard thermodynamic functions for the cell reaction, the primary medium effects of various solvents upon HI, and the standard thermodynamic quantities for the transfer of HI, from the standard state in water to the standard states in the respective solvent media. The chemical effects of solvents on the transfer process have been obtained by subtracting the electrostatic contributions from the total transfer quantities. The results have been discussed in the light of ion-solvent interactions as well as the structural changes of the solvents. (Author)

The magnet components database system

International Nuclear Information System (INIS)

Baggett, M.J.; Leedy, R.; Saltmarsh, C.; Tompkins, J.C.

1990-01-01

The philosophy, structure, and usage of MagCom, the SSC magnet components database, are described. The database has been implemented in Sybase (a powerful relational database management system) on a UNIX-based workstation at the Superconducting Super Collider Laboratory (SSCL); magnet project collaborators can access the database via network connections. The database was designed to contain the specifications and measured values of important properties for major materials, plus configuration information (specifying which individual items were used in each cable, coil, and magnet) and the test results on completed magnets. The data will facilitate the tracking and control of the production process as well as the correlation of magnet performance with the properties of its constituents. 3 refs., 9 figs

The magnet components database system

International Nuclear Information System (INIS)

Baggett, M.J.; Leedy, R.; Saltmarsh, C.; Tompkins, J.C.

1990-01-01

The philosophy, structure, and usage MagCom, the SSC magnet components database, are described. The database has been implemented in Sybase (a powerful relational database management system) on a UNIX-based workstation at the Superconducting Super Collider Laboratory (SSCL); magnet project collaborators can access the database via network connections. The database was designed to contain the specifications and measured values of important properties for major materials, plus configuration information (specifying which individual items were used in each cable, coil, and magnet) and the test results on completed magnets. These data will facilitate the tracking and control of the production process as well as the correlation of magnet performance with the properties of its constituents. 3 refs., 10 figs

Advances in knowledge discovery in databases

CERN Document Server

Adhikari, Animesh

2015-01-01

This book presents recent advances in Knowledge discovery in databases (KDD) with a focus on the areas of market basket database, time-stamped databases and multiple related databases. Various interesting and intelligent algorithms are reported on data mining tasks. A large number of association measures are presented, which play significant roles in decision support applications. This book presents, discusses and contrasts new developments in mining time-stamped data, time-based data analyses, the identification of temporal patterns, the mining of multiple related databases, as well as local patterns analysis.  

Validity of at home model predictions as a proxy for personal exposure to radiofrequency electromagnetic fields from mobile phone base stations.

Science.gov (United States)

Martens, Astrid L; Bolte, John F B; Beekhuizen, Johan; Kromhout, Hans; Smid, Tjabe; Vermeulen, Roel C H

2015-10-01

Epidemiological studies on the potential health effects of RF-EMF from mobile phone base stations require efficient and accurate exposure assessment methods. Previous studies have demonstrated that the 3D geospatial model NISMap is able to rank locations by indoor and outdoor RF-EMF exposure levels. This study extends on previous work by evaluating the suitability of using NISMap to estimate indoor RF-EMF exposure levels at home as a proxy for personal exposure to RF-EMF from mobile phone base stations. For 93 individuals in the Netherlands we measured personal exposure to RF-EMF from mobile phone base stations during a 24h period using an EME-SPY 121 exposimeter. Each individual kept a diary from which we extracted the time spent at home and in the bedroom. We used NISMap to model exposure at the home address of the participant (at bedroom height). We then compared model predictions with measurements for the 24h period, when at home, and in the bedroom by the Spearman correlation coefficient (rsp) and by calculating specificity and sensitivity using the 90th percentile of the exposure distribution as a cutpoint for high exposure. We found a low to moderate rsp of 0.36 for the 24h period, 0.51 for measurements at home, and 0.41 for measurements in the bedroom. The specificity was high (0.9) but with a low sensitivity (0.3). These results indicate that a meaningful ranking of personal RF-EMF can be achieved, even though the correlation between model predictions and 24h personal RF-EMF measurements is lower than with at home measurements. However, the use of at home RF-EMF field predictions from mobile phone base stations in epidemiological studies leads to significant exposure misclassification that will result in a loss of statistical power to detect health effects. Copyright © 2015 Elsevier Inc. All rights reserved.

Electric and magnetic field measurements in an outdoor electric power substation

Energy Technology Data Exchange (ETDEWEB)

Safigianni, A.S.; Tsompanidou, C.G. [Democritus Univ. Thrace, Xanthi (Greece). Dept. of Electrical and Computer Engineering

2006-07-01

With the ever increasing environmental exposure to man-made electromagnetic fields (EMFs), public concern regarding the potential health hazards of exposure to electric and magnetic fields at extremely low frequencies (ELF) has also increased. This paper examined the ELF fields at a 150/20 kV outdoor electric power substation in Xanthi, Greece. Basic data regarding this substation was provided along with previous relevant research studies. The reference levels for safe general public and occupational exposure according to the International Commission on Non-Ionizing Radiation Protection (ICNIRP) was also presented. The instruments used to take the measurements were described and indicative results of the EMFs measurements in the substation were provided. In general, the measured magnetic flux density values were far below the reference level for safe public and occupational exposure. No significant differentiation was noted in these values in relation to body height. However, the levels were found to be in violation in two positions, near the capacitor banks. It was emphasized that these values greatly decreased with distance, and the positions where these high values were measured were not occupied by technicians when the capacitors were under voltage. In addition, it was emphasized that the measured magnetic flux density values were very small in the supervision room, where the supervisor of the substation works and in the ring zone where the public has access. All the measured electric field strength values were below the reference level for safe public and occupational exposure. It was concluded that the measured field values are within recognized guidelines and pose no danger for public or working personnel. 19 refs., 1 tab., 4 figs.

Comparison of several satellite-derived databases of surface solar radiation against ground measurement in Morocco

Science.gov (United States)

Marchand, Mathilde; Ghennioui, Abdellatif; Wey, Etienne; Wald, Lucien

2018-04-01

HelioClim-3v4 (HC3v4), HelioClim-3v5 (HC3v5) and the radiation service version 2 of the Copernicus Atmosphere Monitoring Service (CAMS-Rad) are databases that contain hourly values of solar radiation at ground level. These estimated hourly irradiations are compared to coincident measurements made at five stations in Morocco. The correlation coefficients between measurements and estimates are similar for the three databases and around 0.97-0.98 for global irradiation. For the direct irradiation, the correlation coefficients are around 0.70-0.79 for HC3v4, 0.79-0.84 for HC3v5 and 0.78-0.87 for CAMS-Rad. For global irradiation, the bias relative to the average of the measurements is small and ranges between -6 and -1 % for HC3v4, -4 and 0 % for HC3v5, and -4 and 7 % for CAMS-Rad; HC3v4 and HC3v5 exhibit a tendency to slightly underestimate the global irradiation. The root mean square error (RMSE) ranges between 53 (12 %) and 72 Wh m-2 (13 %) for HC3v4, 55 (12 %) and 71 Wh m-2 (13 %) for HC3v5, and 59 (11 %) and 97 Wh m-2 (21 %) for CAMS-Rad. For the direct irradiation, the relative bias ranges between -16 and 21 % for HC3v4, -7 and 22 % for HC3v5, and -18 and 7 % for CAMS-Rad. The RMSE ranges between 170 (28 %) and 210 Wh m-2 (33 %) for HC3v4, 153 (25 %) and 209 Wh m-2 (40 %) for HC3v5, and 159 (26 %) and 244 Wh m-2 (39 %) for CAMS-Rad. HC3v5 captures the temporal and spatial variability of the irradiation field well. The performance is poorer for HC3v4 and CAMS-Rad which exhibit more variability from site to site. As a whole, the three databases are reliable sources on solar radiation in Morocco.

Development of oxygen sensors using zirconia solid electrolyte for fuel rods

International Nuclear Information System (INIS)

Hiura, Nobuo; Endou, Yasuichi; Yamaura, Takayuki; Matui, Yoshinori; Niimi, Motoji; Hoshiya, Taiji; Kobiyama, Mamoru; Motohashi, Yoshinobu

1999-01-01

The oxygen potential in oxide fuel pellet is an important parameter to understand behavior of high burn up fuel and its integrity. Zirconia solid electrolyte which is durable under irradiation and high temperature is considered as candidate material for the oxygen potential. Combined use of solid electrolyte and Ni/NiO as a solid standard electrode will realize small size oxygen sensor which can be easily loaded in the fuel rod. Prototypes of the oxygen sensor made of these materials were irradiated with neutrons the Japan Materials Testing Reactor (JMTR), and characteristics of electromotive force (EMF) by sensors were examined under irradiation. For a prototype using zirconia solid electrolyte stabilized by Y 2 O 3 (YSZ), measured EMF under irradiation was nearly equivalent to the value under unirradiated condition, and very stable within a range of neutron fluence (E>1 MeV) up to 1.52 x 10 23 m -2 and for the time of 600 h. However, the measured EMFs were slightly smaller than the theoretical values. The reason for this decrease of the EMF was thought as due to insufficient adhesion forces between solid electrolyte and standard electrode. After modification of the sensor to increase adhesion force, EMF was measured again under irradiation. The results showed improvement of the characteristics of the sensor in which measured EMFs were almost equivalent to the theoretical values. (author)

Fast Structural Search in Phylogenetic Databases

Directory of Open Access Journals (Sweden)

William H. Piel

2005-01-01

Full Text Available As the size of phylogenetic databases grows, the need for efficiently searching these databases arises. Thanks to previous and ongoing research, searching by attribute value and by text has become commonplace in these databases. However, searching by topological or physical structure, especially for large databases and especially for approximate matches, is still an art. We propose structural search techniques that, given a query or pattern tree P and a database of phylogenies D, find trees in D that are sufficiently close to P . The “closeness” is a measure of the topological relationships in P that are found to be the same or similar in a tree D in D. We develop a filtering technique that accelerates searches and present algorithms for rooted and unrooted trees where the trees can be weighted or unweighted. Experimental results on comparing the similarity measure with existing tree metrics and on evaluating the efficiency of the search techniques demonstrate that the proposed approach is promising

ProDis-ContSHC: learning protein dissimilarity measures and hierarchical context coherently for protein-protein comparison in protein database retrieval.

Science.gov (United States)

Wang, Jingyan; Gao, Xin; Wang, Quanquan; Li, Yongping

2012-05-08

The need to retrieve or classify protein molecules using structure or sequence-based similarity measures underlies a wide range of biomedical applications. Traditional protein search methods rely on a pairwise dissimilarity/similarity measure for comparing a pair of proteins. This kind of pairwise measures suffer from the limitation of neglecting the distribution of other proteins and thus cannot satisfy the need for high accuracy of the retrieval systems. Recent work in the machine learning community has shown that exploiting the global structure of the database and learning the contextual dissimilarity/similarity measures can improve the retrieval performance significantly. However, most existing contextual dissimilarity/similarity learning algorithms work in an unsupervised manner, which does not utilize the information of the known class labels of proteins in the database. In this paper, we propose a novel protein-protein dissimilarity learning algorithm, ProDis-ContSHC. ProDis-ContSHC regularizes an existing dissimilarity measure dij by considering the contextual information of the proteins. The context of a protein is defined by its neighboring proteins. The basic idea is, for a pair of proteins (i, j), if their context N(i) and N(j) is similar to each other, the two proteins should also have a high similarity. We implement this idea by regularizing dij by a factor learned from the context N(i) and N(j).Moreover, we divide the context to hierarchial sub-context and get the contextual dissimilarity vector for each protein pair. Using the class label information of the proteins, we select the relevant (a pair of proteins that has the same class labels) and irrelevant (with different labels) protein pairs, and train an SVM model to distinguish between their contextual dissimilarity vectors. The SVM model is further used to learn a supervised regularizing factor. Finally, with the new Supervised learned Dissimilarity measure, we update the Protein Hierarchial

Assessment of electromagnetic fields intensity emitted by cellular phone base stations in surrounding flats - a preliminary study

International Nuclear Information System (INIS)

Zmyslony, M.; Politanski, P.; Mamrot, P.; Bortkiewicz, A.

2006-01-01

A rapid development of mobile telecommunications (MT) has resulted in an increased concern about possible detrimental health effects of electromagnetic fields (EMFs) emitted by MT systems, and by MT base stations in particular. Research into EMFs effects on the health of inhabitants living in their vicinity requires first of all a solid assessment of the exposure level. Up to now, the reports in this field have been rather scant. This article presents the results of preliminary measurements of EMFs fields in selected flats around selected base stations in the city of Lodz. Measurements of electric field strength, E, to assess EMF exposure were based on the standard procedures currently in force in Poland. As the study is regarded as a preliminary one, the measurements were conducted in buildings with the expected largest radiation. The measurements show that in the flats located up to 500 m from the base station, EMFs are within the limits specified by relevant Polish regulations on the general public and environmental protection. It was also observed that in a few (less than 10%) flats the field with E exceeded 0.8 V/m. The results show that there are no correlations between electric field strength and distance between the flat and the base station. Therefore, the distance from the base station cannot be used to represent the exposure rate; to determine the latter, EMF measurements are necessary. (author)

The oxygen potential of near- and non-stoichiometric urania-25 mol% plutonia solid solutions: a comparison of thermogravimetric and galavanic cell measurements

International Nuclear Information System (INIS)

Woodley, R.E.; Adamson, M.G.

1979-01-01

To resolve discrepancies between the existing low temperature ΔGsub(0 2 )(mean) data for solid solution mixed (U, Pu)-oxide nuclear fuel material, additional measurements have been performed on Usub(0.75)Pusub(0.25) employing a combined thermogravimetric (TGA) and solid-electrolyte galvanic cell technique. These measurements, which were performed at temperatures between 800 and 1000 0 C, and for O:M ratios in the range 1.940 to 2.028, are reasonably self-consistent and show good agreement with the results of previous TGA measurements. However, they do not corroborate the earlier EMF cell measurements of Markin and McIver. (1967). Possible explanations for errors in these earlier EMF cell results are examined. The new results indicate that the ΔGsub(O 2 )(mean) of stoichiometric mixed oxide at typical outer surface fuel temperature is close to -100 kcal/mol 0 2 (-419 kJ/mol O 2 ). Attempts have been made to fit the new ΔGsub(O 2 )(mean) data to two equations derived from recent defect models, and it is shown that neither equation accurately represents the experimental psub(O 2 ) - x data over more than a short range of x. (Auth.)

The Danish national quality database for births

DEFF Research Database (Denmark)

Andersson, Charlotte Brix; Flems, Christina; Kesmodel, Ulrik Schiøler

2016-01-01

Aim of the database: The aim of the Danish National Quality Database for Births (DNQDB) is to measure the quality of the care provided during birth through specific indicators. Study population: The database includes all hospital births in Denmark. Main variables: Anesthesia/pain relief, continuous...... Medical Birth Registry. Registration to the Danish Medical Birth Registry is mandatory for all maternity units in Denmark. During the 5 years, performance has improved in the areas covered by the process indicators and for some of the outcome indicators. Conclusion: Measuring quality of care during...

SFCOMPO 2.0. Database of measured isotopic concentrations of spent nuclear fuel, with operational histories and design data

International Nuclear Information System (INIS)

2017-06-01

SFCOMPO 2.0 (Spent Fuel Isotopic Composition) is a relational database designed to facilitate the search and visualisation of experimental assay data of spent nuclear fuel. It allows the user to access, plot and export isotopic composition data, reactor operational histories and relevant design data relating to spent fuel samples. The database can be queried using different search criteria. The data in SFCOMPO come from fuel samples irradiated in power reactors which have been experimentally measured in the past 50 years. SFCOMPO 2.0 offers a consistent and standardised approach to store, retrieve and compare different datasets from different post-irradiation experimental campaigns. Whenever it has been possible, original experimental lab reports or original publications have either been linked directly from the application, or are referenced. The aim of SFCOMPO 2.0 is to present the user of assay data with a referenced, standardised, cross-checked source of published experimental data for the use of assay data evaluators. SFCOMPO 2.0 was publicly released in June 2017. It contains experimental data coming from 44 different reactors of 8 different international types, currently representing 750 fuel samples. The database currently contains more than 24,000 measurement entries. The data in SFCOMPO 2.0 have been independently reviewed for consistency with the experimental reports but has not been formally evaluated. Any errors in measurements, omissions, or inconsistencies in the original reported data may be reproduced in the database. Therefore it is important that any user of the data for code validation consider and assess the potential data deficiencies. The evaluation of assay data will provide a more complete assessment and may result in the development of benchmark specifications and measurement data in cases of high quality experiments. Evaluations are a multi-disciplinary effort involving reactor specialists, modeling and simulation experts, and

HCSD: the human cancer secretome database

DEFF Research Database (Denmark)

Feizi, Amir; Banaei-Esfahani, Amir; Nielsen, Jens

2015-01-01

The human cancer secretome database (HCSD) is a comprehensive database for human cancer secretome data. The cancer secretome describes proteins secreted by cancer cells and structuring information about the cancer secretome will enable further analysis of how this is related with tumor biology...... database is limiting the ability to query the increasing community knowledge. We therefore developed the Human Cancer Secretome Database (HCSD) to fulfil this gap. HCSD contains >80 000 measurements for about 7000 nonredundant human proteins collected from up to 35 high-throughput studies on 17 cancer...

Knowledge based literature data base on the effect of electromagnetic fields on the organism and implants

International Nuclear Information System (INIS)

Wienert, Roman; Dechent, Dagmar; Silny, Jiri

2005-01-01

The ''EMF-Portal'' is an Internet-based information platform in the research area of non-ionizing radiation effects. It is supplied by a variety of linked information sources and it provides scientific knowledge based on the results of at present approx. 7.700 (mainly peer-reviewed) publications related to bioelectromagnetic interaction. Different help tools support the interested user in both finding and interpreting relevant data. The EMF-Portal is multi-lingual: English and German are currently supported, other languages can be added. It is the aim of the portal to enable all users, regardless of their education or occupation, to ask complex questions about EMF and their effects and to receive specific and comprehensive answers. Assisted by an interdisciplinary glossary and a database of everyday's exposure sources, as well as an in-depth literature database, the user obtains a dynamically generated answer based on the results of all related publication data. The answer may consist of either a list of corresponding literature references or of different types of statistics e.g. regarding investigated endpoints. The Information System consists of two main components: The knowledge based literature database (a.k.a. WBLDB) and the EMF-Portal. The WBLDB contains most of the relevant scientific literature published so far. In addition to the publication data, the descriptors (exposure, methods, results etc.) of each study are extracted. With the help of this database the user has detailed insight into individual publications without having to read the full text, and he can produce statistical overviews over corresponding related studies as well as an objective comparison between different publications. The EMF-Portal which is the subject of this research project consists of the following modules: The interdisciplinary glossary comprehensively explains related biological, medical, epidemiological, technical or dosimetric terms. The database of everyday's exposure

ProDis-ContSHC: Learning protein dissimilarity measures and hierarchical context coherently for protein-protein comparison in protein database retrieval

KAUST Repository

Wang, Jim Jing-Yan

2012-05-08

Background: The need to retrieve or classify protein molecules using structure or sequence-based similarity measures underlies a wide range of biomedical applications. Traditional protein search methods rely on a pairwise dissimilarity/similarity measure for comparing a pair of proteins. This kind of pairwise measures suffer from the limitation of neglecting the distribution of other proteins and thus cannot satisfy the need for high accuracy of the retrieval systems. Recent work in the machine learning community has shown that exploiting the global structure of the database and learning the contextual dissimilarity/similarity measures can improve the retrieval performance significantly. However, most existing contextual dissimilarity/similarity learning algorithms work in an unsupervised manner, which does not utilize the information of the known class labels of proteins in the database.Results: In this paper, we propose a novel protein-protein dissimilarity learning algorithm, ProDis-ContSHC. ProDis-ContSHC regularizes an existing dissimilarity measure dij by considering the contextual information of the proteins. The context of a protein is defined by its neighboring proteins. The basic idea is, for a pair of proteins (i, j), if their context N (i) and N (j) is similar to each other, the two proteins should also have a high similarity. We implement this idea by regularizing dij by a factor learned from the context N (i) and N (j). Moreover, we divide the context to hierarchial sub-context and get the contextual dissimilarity vector for each protein pair. Using the class label information of the proteins, we select the relevant (a pair of proteins that has the same class labels) and irrelevant (with different labels) protein pairs, and train an SVM model to distinguish between their contextual dissimilarity vectors. The SVM model is further used to learn a supervised regularizing factor. Finally, with the new Supervised learned Dissimilarity measure, we update

Investigating short-term exposure to electromagnetic fields on reproductive capacity of invertebrates in the field situation.

Science.gov (United States)

Vijver, Martina G; Bolte, John F B; Evans, Tracy R; Tamis, Wil L M; Peijnenburg, Willie J G M; Musters, C J M; de Snoo, Geert R

2014-01-01

Organisms are exposed to electromagnetic fields from the introduction of wireless networks that send information all over the world. In this study we examined the impact of exposure to the fields from mobile phone base stations (GSM 900 MHz) on the reproductive capacity of small, virgin, invertebrates. A field experiment was performed exposing four different invertebrate species at different distances from a radiofrequency electromagnetic fields (RF EMF) transmitter for a 48-h period. The control groups were isolated from EMF exposure by use of Faraday cages. The response variables as measured in the laboratory were fecundity and number of offspring. Results showed that distance was not an adequate proxy to explain dose-response regressions. No significant impact of the exposure matrices, measures of central tendency and temporal variability of EMF, on reproductive endpoints was found. Finding no impact on reproductive capacity does not fully exclude the existence of EMF impact, since mechanistically models hypothesizing non-thermal-induced biological effects from RF exposure are still to be developed. The exposure to RF EMF is ubiquitous and is still increasing rapidly over large areas. We plea for more attention toward the possible impacts of EMF on biodiversity.

Database Description - Yeast Interacting Proteins Database | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available List Contact us Yeast Interacting Proteins Database Database Description General information of database Database... name Yeast Interacting Proteins Database Alternative name - DOI 10.18908/lsdba.nbdc00742-000 Creator C...-ken 277-8561 Tel: +81-4-7136-3989 FAX: +81-4-7136-3979 E-mail : Database classif...s cerevisiae Taxonomy ID: 4932 Database description Information on interactions and related information obta...l Acad Sci U S A. 2001 Apr 10;98(8):4569-74. Epub 2001 Mar 13. External Links: Original website information Database

De-identifying an EHR Database

DEFF Research Database (Denmark)

Lauesen, Søren; Pantazos, Kostas; Lippert, Søren

2011-01-01

-identified a Danish EHR database with 437,164 patients. The goal was to generate a version with real medical records, but related to artificial persons. We developed a de-identification algorithm that uses lists of named entities, simple language analysis, and special rules. Our algorithm consists of 3 steps: collect...... lists of identifiers from the database and external resources, define a replacement for each identifier, and replace identifiers in structured data and free text. Some patient records could not be safely de-identified, so the de-identified database has 323,122 patient records with an acceptable degree...... of anonymity, readability and correctness (F-measure of 95%). The algorithm has to be adjusted for each culture, language and database....

Update History of This Database - Trypanosomes Database | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available List Contact us Trypanosomes Database Update History of This Database Date Update contents 2014/05/07 The co...ntact information is corrected. The features and manner of utilization of the database are corrected. 2014/02/04 Trypanosomes Databas...e English archive site is opened. 2011/04/04 Trypanosomes Database ( http://www.tan...paku.org/tdb/ ) is opened. About This Database Database Description Download Lice...nse Update History of This Database Site Policy | Contact Us Update History of This Database - Trypanosomes Database | LSDB Archive ...

Global Findex Database 2017 : Measuring Financial Inclusion and the Fintech Revolution

OpenAIRE

Demirguc-Kunt, Asli; Klapper, Leora; Singer, Dorothe; Ansar, Saniya; Hess, Jake

2018-01-01

The Global Findex database is the world's most comprehensive set of data on how people make payments, save money, borrow and manage risk. Launched in 2011, it includes more than 100 financial inclusion indicators in a format allowing users to compare access to financial services among adults worldwide -- including by gender, age and household income. This third edition of the database was compiled in 2017 using nationally representative surveys in more than 140 developing and high-income...

Corrosion of Steel in Concrete – Specimen Design for Investigation of Interface and Bulk Conversions during Curing and Exposure

DEFF Research Database (Denmark)

Küter, Andre; Møller, Per; Geiker, Mette Rica

2005-01-01

A reinforced mortar specimen that allows electromotive force (EMF) measurements and electrochemical impedance spectroscopy (EIS) was designed and tested. The specimen consists of a mortar cylinder with a central rebar and a concentric arrangement of embedded electrode wires. The wires can act...... as both reference and counter electrode during EIS and the arrangement allows investigation of local changes in the bulk mortar by measuring the EMF of each wire versus an external standard electrode. The state of corrosion of the rebar can be investigated by EIS and EMF. EIS can be performed before...

Electric and Magnetic Fields Research and Public Information Dissemination Program annual report for fiscal year 1996

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-06-01

The Electric and Magnetic Fields (EMF) Research and Public Information Dissemination (RAPID) Program was authorized by the Energy Policy Act of 1992 as a near-term effort to expand and accelerate the research needed to address the EMF issue. As required by this legislation, the EMF Interagency Committee, the National EMF Advisory Committee (NEMFAC), and the National Academy of Sciences (NAS) are providing valued input and advice for the direction of this program. With this input and advice, the Department of Energy (DOE) and the National Institute of Environmental Health Sciences (NIEHS) have developed and are implementing five-year program plans. Multi-year health effects research projects and related EMF measurement and exposure assessment projects are underway using funds appropriated in fiscal years 1994, 1995, and 1996 together with voluntary non-Federal contributions. The results of these research projects, along with the results of other EMF research, will be used as input to the hazard evaluation effort, which is the focus of the EMF RAPID Program. A coordinated interagency program is underway to communicate needed information on the EMF issue in a clear manner to the public and other decision makers.

Symptoms and the use of wireless communication devices: A prospective cohort study in Swiss adolescents

Energy Technology Data Exchange (ETDEWEB)

Schoeni, Anna, E-mail: anna.schoeni@unibas.ch [Swiss Tropical and Public Health Institute, Socinstrasse 57, P.O. Box, CH-4002 Basel (Switzerland); University of Basel, Petersplatz 1, CH-4003 Basel (Switzerland); Roser, Katharina, E-mail: katharina.roser@unibas.ch [Swiss Tropical and Public Health Institute, Socinstrasse 57, P.O. Box, CH-4002 Basel (Switzerland); University of Basel, Petersplatz 1, CH-4003 Basel (Switzerland); Röösli, Martin, E-mail: martin.roosli@unibas.ch [Swiss Tropical and Public Health Institute, Socinstrasse 57, P.O. Box, CH-4002 Basel (Switzerland); University of Basel, Petersplatz 1, CH-4003 Basel (Switzerland)

2017-04-15

Background: We investigated whether radiofrequency electromagnetic fields (RF-EMF) from mobile phones and other wireless devices or by the wireless device use itself due to non-radiation related factors in that context are associated with an increase in health symptom reports of adolescents in Central Switzerland. Methods: In a prospective cohort study, 439 study participants (participation rate: 36.8%) aged 12–17 years, completed questionnaires about their mobile and cordless phone use, their self-reported symptoms and possible confounding factors at baseline (2012/2013) and one year later (2013/2014). Operator recorded mobile phone data was obtained for a subgroup of 234 adolescents. RF-EMF dose measures considering various factors affecting RF-EMF exposure were computed for the brain and the whole body. Data were analysed using a mixed-logistic cross-sectional model and a cohort approach, where we investigated whether cumulative dose over one year was related to a new onset of a symptom between baseline and follow-up. All analyses were adjusted for relevant confounders. Results: Participation rate in the follow-up was 97% (425 participants). In both analyses, cross-sectional and cohort, various symptoms tended to be mostly associated with usage measures that are only marginally related to RF-EMF exposure such as the number of text messages sent per day (e.g. tiredness: OR:1.81; 95%CI:1.20–2.74 for cross-sectional analyses and OR:1.87; 95%CI:1.04–3.38 for cohort analyses). Outcomes were generally less strongly or not associated with mobile phone call duration and RF-EMF dose measures. Conclusions: Stronger associations between symptoms of ill health and wireless communication device use than for RF-EMF dose measures were observed. Such a result pattern does not support a causal association between RF-EMF exposure and health symptoms of adolescents but rather suggests that other aspects of extensive media use are related to symptoms. - Highlights: • This

Symptoms and the use of wireless communication devices: A prospective cohort study in Swiss adolescents

International Nuclear Information System (INIS)

Schoeni, Anna; Roser, Katharina; Röösli, Martin

2017-01-01

Background: We investigated whether radiofrequency electromagnetic fields (RF-EMF) from mobile phones and other wireless devices or by the wireless device use itself due to non-radiation related factors in that context are associated with an increase in health symptom reports of adolescents in Central Switzerland. Methods: In a prospective cohort study, 439 study participants (participation rate: 36.8%) aged 12–17 years, completed questionnaires about their mobile and cordless phone use, their self-reported symptoms and possible confounding factors at baseline (2012/2013) and one year later (2013/2014). Operator recorded mobile phone data was obtained for a subgroup of 234 adolescents. RF-EMF dose measures considering various factors affecting RF-EMF exposure were computed for the brain and the whole body. Data were analysed using a mixed-logistic cross-sectional model and a cohort approach, where we investigated whether cumulative dose over one year was related to a new onset of a symptom between baseline and follow-up. All analyses were adjusted for relevant confounders. Results: Participation rate in the follow-up was 97% (425 participants). In both analyses, cross-sectional and cohort, various symptoms tended to be mostly associated with usage measures that are only marginally related to RF-EMF exposure such as the number of text messages sent per day (e.g. tiredness: OR:1.81; 95%CI:1.20–2.74 for cross-sectional analyses and OR:1.87; 95%CI:1.04–3.38 for cohort analyses). Outcomes were generally less strongly or not associated with mobile phone call duration and RF-EMF dose measures. Conclusions: Stronger associations between symptoms of ill health and wireless communication device use than for RF-EMF dose measures were observed. Such a result pattern does not support a causal association between RF-EMF exposure and health symptoms of adolescents but rather suggests that other aspects of extensive media use are related to symptoms. - Highlights: • This

Temperature measurement error due to the effects of time varying magnetic fields on thermocouples with ferromagnetic thermoelements

International Nuclear Information System (INIS)

McDonald, D.W.

1977-01-01

Thermocouples with ferromagnetic thermoelements (iron, Alumel, Nisil) are used extensively in industry. We have observed the generation of voltage spikes within ferromagnetic wires when the wires are placed in an alternating magnetic field. This effect has implications for thermocouple thermometry, where it was first observed. For example, the voltage generated by this phenomenon will contaminate the thermocouple thermal emf, resulting in temperature measurement error

Update History of This Database - Arabidopsis Phenome Database | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available List Contact us Arabidopsis Phenome Database Update History of This Database Date Update contents 2017/02/27 Arabidopsis Phenome Data...base English archive site is opened. - Arabidopsis Phenome Database (http://jphenom...e.info/?page_id=95) is opened. About This Database Database Description Download License Update History of This Database... Site Policy | Contact Us Update History of This Database - Arabidopsis Phenome Database | LSDB Archive ...

RA radiological characterization database application

International Nuclear Information System (INIS)

Steljic, M.M; Ljubenov, V.Lj. . E-mail address of corresponding author: milijanas@vin.bg.ac.yu; Steljic, M.M.)

2005-01-01

Radiological characterization of the RA research reactor is one of the main activities in the first two years of the reactor decommissioning project. The raw characterization data from direct measurements or laboratory analyses (defined within the existing sampling and measurement programme) have to be interpreted, organized and summarized in order to prepare the final characterization survey report. This report should be made so that the radiological condition of the entire site is completely and accurately shown with the radiological condition of the components clearly depicted. This paper presents an electronic database application, designed as a serviceable and efficient tool for characterization data storage, review and analysis, as well as for the reports generation. Relational database model was designed and the application is made by using Microsoft Access 2002 (SP1), a 32-bit RDBMS for the desktop and client/server database applications that run under Windows XP. (author)

Refactoring databases evolutionary database design

CERN Document Server

Ambler, Scott W

2006-01-01

Refactoring has proven its value in a wide range of development projects–helping software professionals improve system designs, maintainability, extensibility, and performance. Now, for the first time, leading agile methodologist Scott Ambler and renowned consultant Pramodkumar Sadalage introduce powerful refactoring techniques specifically designed for database systems. Ambler and Sadalage demonstrate how small changes to table structures, data, stored procedures, and triggers can significantly enhance virtually any database design–without changing semantics. You’ll learn how to evolve database schemas in step with source code–and become far more effective in projects relying on iterative, agile methodologies. This comprehensive guide and reference helps you overcome the practical obstacles to refactoring real-world databases by covering every fundamental concept underlying database refactoring. Using start-to-finish examples, the authors walk you through refactoring simple standalone databas...

Update History of This Database - SKIP Stemcell Database | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available List Contact us SKIP Stemcell Database Update History of This Database Date Update contents 2017/03/13 SKIP Stemcell Database... English archive site is opened. 2013/03/29 SKIP Stemcell Database ( https://www.skip.med.k...eio.ac.jp/SKIPSearch/top?lang=en ) is opened. About This Database Database Description Download License Update History of This Databa...se Site Policy | Contact Us Update History of This Database - SKIP Stemcell Database | LSDB Archive ...

Database for environmental monitoring in nuclear facilities

International Nuclear Information System (INIS)

Raceanu, Mircea; Varlam, Carmen; Iliescu, Mariana; Enache, Adrian; Faurescu, Ionut

2006-01-01

To ensure that an assessment could be made of the impact of nuclear facilities on the local environment, a program of environmental monitoring must be established well before of nuclear facility commissioning. Enormous amount of data must be stored and correlated starting with: location, meteorology, type sample characterization from water to different kind of foods, radioactivity measurement and isotopic measurement (e.g. for C-14 determination, C-13 isotopic correction it is a must). Data modelling is a well known mechanism describing data structures at a high level of abstraction. Such models are often used to automatically create database structures, and to generate the code structures used to access the databases. This has the disadvantage of losing data constraints that might be specified in data models for data checking. Embodiment of the system of the present application includes a computer-readable memory for storing a definitional data table for defining variable symbols representing the corresponding measurable physical quantities. Developing a database system implies setting up well-established rules of how the data should be stored and accessed what is commonly called the Relational Database Theory. This consists of guidelines regarding issues as how to avoid duplicating data using the technique called normalization and how to identify the unique identifier for a database record. (authors)

Aggregated data from two double-blind base station provocation studies comparing individuals with idiopathic environmental intolerance with attribution to electromagnetic fields and controls.

Science.gov (United States)

Eltiti, Stacy; Wallace, Denise; Russo, Riccardo; Fox, Elaine

2015-02-01

Data from two previous studies were aggregated to provide a statistically powerful test of whether exposure to electromagnetic fields (EMFs) produced by telecommunication base stations negatively affects well-being in individuals who report idiopathic environmental illness with attribution to electromagnetic fields (IEI-EMF) and control participants. A total of 102 IEI-EMF and 237 controls participated in open provocation trials and 88 IEI-EMF and 231 controls went on to complete double-blind trials in which they were exposed to EMFs from a base station emitting either a Global System for Mobile Communication and Universal Mobile Telecommunications System or a Terrestrial Trunked Radio Telecommunications System signal. Both experiments included a comparison sham condition. Visual analog and symptom scales measured subjective well-being. Results showed that IEI-EMF participants reported lower levels of well-being during real compared to sham exposure during open provocation, but not during double-blind trials. Additionally, participants reported lower levels of well-being during high compared to low load trials and this did not interact with radiofrequency-EMF exposure. These findings are consistent with a growing body of literature indicating there is no causal relationship between short-term exposure to EMFs and subjective well-being in members of the public whether or not they report perceived sensitivity to EMFs. © 2015 Wiley Periodicals, Inc.

Database design and database administration for a kindergarten

OpenAIRE

Vítek, Daniel

2009-01-01

The bachelor thesis deals with creation of database design for a standard kindergarten, installation of the designed database into the database system Oracle Database 10g Express Edition and demonstration of the administration tasks in this database system. The verification of the database was proved by a developed access application.

Electromagnetic fields and health complaints - interdisciplinary case evaluations in an environmental medicine counselling project; Elektromagnetische Felder und Gesundheitsbelastungen - Interdisziplinaere Fallabklaerungen im Rahmen eines umweltmedizinischen Beratungsprojektes

Energy Technology Data Exchange (ETDEWEB)

Huss, A.; Braun-Fahrlaender, C. [Inst. fuer Sozial- und Praeventivmedizin, Basel (Switzerland); Kuechenhoff, J. [Psychiatrische Universitaetsklinik Basel (Switzerland); Bircher, A. [Kantonsspital Basel, Allergologie, Basel (Switzerland); Niederer, M. [Kantonales Lab., Basel (Switzerland); Tremp, J. [Amt fuer Umwelt und Energie, Liestal (Switzerland); Waeber, R. [Bundesamt fuer Gesundheit, Abt. Chemikalien, Bern (Switzerland)

2005-07-01

Background: During 2001, persons who attributed their health problems to environmental exposures, e.g. electromagnetic fields (EMF), were counselled in an interdisciplinary environmental medicine pilot project in the Basel area. Methods: All participants had a medical and a psychological-psychiatric examination and were visited at home by an environmental hygienist. High and low frequency EMF measurements were conducted at the homes of those participants who attributed their health complaints specifically to EMF. The plausibility of a relation between health complaints and EMF exposure was discussed in joint case conferences. Plausibility was judged on the basis of the following criteria: EMF levels had to exceed a tenth of the Swiss threshold values to be considered in the case conference (low frequency: 10 V/m, 0.1 {mu}T, high frequency: 0.6 V/m). The exposure had to occur in an area where the participant spent at least several hours or more every day. Prerequisite was that the exposure occurred before the onset of symptoms. Results: 25 of 63 (40%) of participants suspected EMF as cause of their health complaints. All EMF measurements yielded fields below the Swiss threshold values. Despite of the difficulties in assessing an exposure-response relation in an individual case and the controversial scientific evidence related to health effects of EMF exposures, the project team concluded that in 8 of the 25 (32%) participants, at least one of the reported symptoms was plausibly related to the EMF exposure. An evaluation interview half a year after counselling yielded that around 45% of the participants reported that they had benefited from the project and their health problems had improved following participation. Conclusions: Although none of the threshold values was exceeded, the project team rated an EMF exposure a plausible cause of the reported health complaints of few participants. Due to the high complexity in these cases, only an interdisciplinary team is

An Approach to Measuring Semantic Relatedness of Geographic Terminologies Using a Thesaurus and Lexical Database Sources

Directory of Open Access Journals (Sweden)

Zugang Chen

2018-03-01

Full Text Available In geographic information science, semantic relatedness is important for Geographic Information Retrieval (GIR, Linked Geospatial Data, geoparsing, and geo-semantics. But computing the semantic similarity/relatedness of geographic terminology is still an urgent issue to tackle. The thesaurus is a ubiquitous and sophisticated knowledge representation tool existing in various domains. In this article, we combined the generic lexical database (WordNet or HowNet with the Thesaurus for Geographic Science and proposed a thesaurus–lexical relatedness measure (TLRM to compute the semantic relatedness of geographic terminology. This measure quantified the relationship between terminologies, interlinked the discrete term trees by using the generic lexical database, and realized the semantic relatedness computation of any two terminologies in the thesaurus. The TLRM was evaluated on a new relatedness baseline, namely, the Geo-Terminology Relatedness Dataset (GTRD which was built by us, and the TLRM obtained a relatively high cognitive plausibility. Finally, we applied the TLRM on a geospatial data sharing portal to support data retrieval. The application results of the 30 most frequently used queries of the portal demonstrated that using TLRM could improve the recall of geospatial data retrieval in most situations and rank the retrieval results by the matching scores between the query of users and the geospatial dataset.

FY 1998 survey report. Examinational research on the construction of body function database; 1998 nendo chosa hokokusho. Shintai kino database no kochiku ni kansuru chosa kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

The body function database is aimed at supplying and supporting products and environment friendly to aged people by supplying the data on body function of aged people in case of planning, designing and production when companies supply the products and environment. As a method for survey, group measuring was made for measurement of visual characteristics. For the measurement of action characteristics, the moving action including posture change was studied, the experimental plan was carried out, and items of group measurement and measuring methods were finally proposed. The database structure was made public at the end of this fiscal year, through the pre-publication/evaluation after the trial evaluation conducted using pilot database. In the study of the measurement of action characteristics, the verification test was conducted for a small-size group. By this, the measurement of action characteristics was finally proposed. In the body function database system, subjects on operation were extracted/bettered by trially evaluating pilot database, and also adjustment of right relations toward publication and preparation of management methods were made. An evaluation version was made supposing its publication. (NEDO)

Database Description - Open TG-GATEs Pathological Image Database | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available List Contact us Open TG-GATEs Pathological Image Database Database Description General information of database Database... name Open TG-GATEs Pathological Image Database Alternative name - DOI 10.18908/lsdba.nbdc00954-0...iomedical Innovation 7-6-8, Saito-asagi, Ibaraki-city, Osaka 567-0085, Japan TEL:81-72-641-9826 Email: Database... classification Toxicogenomics Database Organism Taxonomy Name: Rattus norvegi... Article title: Author name(s): Journal: External Links: Original website information Database

New Normative Database of Inner Macular Layer Thickness Measured by Spectralis OCT Used as Reference Standard for Glaucoma Detection.

Science.gov (United States)

Nieves-Moreno, María; Martínez-de-la-Casa, José M; Bambo, María P; Morales-Fernández, Laura; Van Keer, Karel; Vandewalle, Evelien; Stalmans, Ingeborg; García-Feijoó, Julián

2018-02-01

This study examines the capacity to detect glaucoma of inner macular layer thickness measured by spectral-domain optical coherence tomography (SD-OCT) using a new normative database as the reference standard. Participants ( N = 148) were recruited from Leuven (Belgium) and Zaragoza (Spain): 74 patients with early/moderate glaucoma and 74 age-matched healthy controls. One eye was randomly selected for a macular scan using the Spectralis SD-OCT. The variables measured with the instrument's segmentation software were: macular nerve fiber layer (mRNFL), ganglion cell layer (GCL), and inner plexiform layer (IPL) volume and thickness along with circumpapillary RNFL thickness (cpRNFL). The new normative database of macular variables was used to define the cutoff of normality as the fifth percentile by age group. Sensitivity, specificity, and area under the receiver operating characteristic curve (AUROC) of each macular measurement and of cpRNFL were used to distinguish between patients and controls. Overall sensitivity and specificity to detect early-moderate glaucoma were 42.2% and 88.9% for mRNFL, 42.4% and 95.6% for GCL, 42.2% and 94.5% for IPL, and 53% and 94.6% for RNFL, respectively. The best macular variable to discriminate between the two groups of subjects was outer temporal GCL thickness as indicated by an AUROC of 0.903. This variable performed similarly to mean cpRNFL thickness (AUROC = 0.845; P = 0.29). Using our normative database as reference, the diagnostic power of inner macular layer thickness proved comparable to that of peripapillary RNFL thickness. Spectralis SD-OCT, cpRNFL thickness, and individual macular inner layer thicknesses show comparable diagnostic capacity for glaucoma and RNFL, GCL, and IPL thickness may be useful as an alternative diagnostic test when the measure of cpRNFL shows artifacts.

Electrical conductivity and thermo-EMF of cobaltite gallates LaCo_1_-_xGa_xO_3

International Nuclear Information System (INIS)

Lubinskij, N.N.; Shevchenko, S.V.; Bashkirov, L.A.; Petrov, G.S.; Slonskaya, S.V.

2015-01-01

It has been found that in LaCo_1_-_xGa_xO_3 system increase of the substitution degree x from 0 to 0,95 leads to the gradual electrical conductivity (σ) decrease. Within 300-1050 K temperature range for samples LaCo_1_-_xGa_xO_3 with x≤0,5 there are three linear parts on the curve lnσ - T"-"1, where electrical conductivity activation energies have been calculated for the low, intermediate and high temperature ranges. Electrical conductivity activation energy (E_A) for samples at different temperatures has been also estimated using derivatives d(lnσ)/d(T"-"1). The E_A temperature dependence for LaCo_1_-_xGa_xO_3 at 0≤x≤0,5 passes through a maximum that indicates the temperature for beginning of semiconductor-metal phase transition (T_E__A___m___a___x). It has been shown that the thermo-EMF coefficient (S) for LaCo_1_-_xGa_xO_3 (0,1≤x≤0,3) at room temperature is negative, increasing with temperature rising, going through zero at 435-530 K, reaching the maximum at 500-650 K and then dropping down. It has been established that the temperatures corresponding to the maximum S and E_A values are identical. (authors)

Database characterisation of HEP applications

International Nuclear Information System (INIS)

Piorkowski, Mariusz; Grancher, Eric; Topurov, Anton

2012-01-01

Oracle-based database applications underpin many key aspects of operations for both the LHC accelerator and the LHC experiments. In addition to the overall performance, the predictability of the response is a key requirement to ensure smooth operations and delivering predictability requires understanding the applications from the ground up. Fortunately, database management systems provide several tools to check, measure, analyse and gather useful information. We present our experiences characterising the performance of several typical HEP database applications performance characterisations that were used to deliver improved predictability and scalability as well as for optimising the hardware platform choice as we migrated to new hardware and Oracle 11g.

Database on wind characteristics. Users manual

Energy Technology Data Exchange (ETDEWEB)

Larsen, G.C.; Hansen, K.S.

2001-11-01

The main objective of IEA R and D Wind Annex XVII - Database on Wind Characteristics - is to provide wind energy planners and designers, as well as the international wind engineering community in general, with easy access to quality controlled measured wind field time series observed in a wide range of environments. The project partners are Sweden, Norway, U.S.A., The Netherlands, Japan and Denmark, with Denmark as the Operating Agent. The reporting of IEA R and D Annex XVII falls in three separate parts. Part one deals with the overall structure and philosophy behind the database (including the applied data quality control procedures), part two accounts in details for the available data in the established database bank and part three is the Users Manual describing the various ways to access and analyse the data. The present report constitutes part three of the Annex XVII reporting and contains a trough description of the available online facilities for identifying, selecting, downloading and handling measured wind field time series and resource data from 'Database on Wind Characteristics'. (au)

Danish Gynecological Cancer Database

DEFF Research Database (Denmark)

Sørensen, Sarah Mejer; Bjørn, Signe Frahm; Jochumsen, Kirsten Marie

2016-01-01

AIM OF DATABASE: The Danish Gynecological Cancer Database (DGCD) is a nationwide clinical cancer database and its aim is to monitor the treatment quality of Danish gynecological cancer patients, and to generate data for scientific purposes. DGCD also records detailed data on the diagnostic measures...... data forms as follows: clinical data, surgery, pathology, pre- and postoperative care, complications, follow-up visits, and final quality check. DGCD is linked with additional data from the Danish "Pathology Registry", the "National Patient Registry", and the "Cause of Death Registry" using the unique...... Danish personal identification number (CPR number). DESCRIPTIVE DATA: Data from DGCD and registers are available online in the Statistical Analysis Software portal. The DGCD forms cover almost all possible clinical variables used to describe gynecological cancer courses. The only limitation...

Measurement and analysis of electromagnetic pollution generated by GSM-900 mobile phone networks in Erciyes University, Turkey.

Science.gov (United States)

Sorgucu, Ugur; Develi, Ibrahim

2012-12-01

Mobile phones are becoming increasingly important in our everyday lives. The rising number of mobile phones reflects a similar increase in the number of base stations. Because of this rapid evolution, the establishment and planning of new base stations has become mandatory. However, the rise in the number of base stations, in terms of human health, is potentially very harmful. It is important to analyze the radiation levels of base stations until we can confirm that they are definitely not harmful in the long term. Mapping of electromagnetic field (EMF) is also important from a medical point of view because it provides useful information, for example, on the detection of diseases caused by EMF. With the help of this information the distribution of diseases over different regions can be obtained. In this article, the electromagnetic radiation levels of base stations were measured at 80 different points in Erciyes University (ERU), Turkey and detailed information about the measurement tools and measurement method were given. It was observed that no area in ERU exceeded the national and international limits. It is also observed that the effects of base stations vary according to duration and degree of exposure. Therefore, if people are exposed to a very low-intensity electromagnetic field for a very long time, serious health problems can occur.

Assessment of human body influence on exposure measurements of electric field in indoor enclosures.

Science.gov (United States)

de Miguel-Bilbao, Silvia; García, Jorge; Ramos, Victoria; Blas, Juan

2015-02-01

Personal exposure meters (PEMs) used for measuring exposure to electromagnetic fields (EMF) are typically used in epidemiological studies. As is well known, these measurement devices cause a perturbation of real EMF exposure levels due to the presence of the human body in the immediate proximity. This paper aims to model the alteration caused by the body shadow effect (BSE) in motion conditions and in indoor enclosures at the Wi-Fi frequency of 2.4 GHz. For this purpose, simulation techniques based on ray-tracing have been carried out, and their results have been verified experimentally. A good agreement exists between simulation and experimental results in terms of electric field (E-field) levels, and taking into account the cumulative distribution function (CDF) of the spatial distribution of amplitude. The Kolmogorov-Smirnov (KS) test provides a P-value greater than 0.05, in fact close to 1. It has been found that the influence of the presence of the human body can be characterized as an angle of shadow that depends on the dimensions of the indoor enclosure. The CDFs show that the E-field levels in indoor conditions follow a lognormal distribution in the absence of the human body and under the influence of BSE. In conclusion, the perturbation caused by BSE in PEMs readings cannot be compensated for by correction factors. Although the mean value is well adjusted, BSE causes changes in CDF that would require improvements in measurement protocols and in the design of measuring devices to subsequently avoid systematic errors. © 2014 Wiley Periodicals, Inc.

The magnet database system

International Nuclear Information System (INIS)

Baggett, P.; Delagi, N.; Leedy, R.; Marshall, W.; Robinson, S.L.; Tompkins, J.C.

1991-01-01

This paper describes the current status of MagCom, a central database of SSC magnet information that is available to all magnet scientists via network connections. The database has been designed to contain the specifications and measured values of important properties for major materials, plus configuration information (specifying which individual items were used in each cable, coil, and magnet) and the test results on completed magnets. These data will help magnet scientists to track and control the production process and to correlate the performance of magnets with the properties of their constituents

Update History of This Database - Yeast Interacting Proteins Database | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available List Contact us Yeast Interacting Proteins Database Update History of This Database Date Update contents 201...0/03/29 Yeast Interacting Proteins Database English archive site is opened. 2000/12/4 Yeast Interacting Proteins Database...( http://itolab.cb.k.u-tokyo.ac.jp/Y2H/ ) is released. About This Database Database Description... Download License Update History of This Database Site Policy | Contact Us Update History of This Database... - Yeast Interacting Proteins Database | LSDB Archive ...

US-LHC Magnet Database and conventions

CERN Document Server

Wei, J; Jain, A; Peggs, S; Pilat, F; Bottura, L; Sabbi, G L; MacKay, W W

1999-01-01

The US-LHC Magnet Database is designed for production-magnet quality assurance, field and alignment error impact analysis, cryostat assembly assistance, and ring installation assistance. The database consists of tables designed to store magnet field and alignment measurements data and quench data. This information will also be essential for future machine operations including local IR corrections. (7 refs).

US-LHC Magnet Database and Conventions

International Nuclear Information System (INIS)

Wei, J.; McChesney, D.; Jain, A.; Peggs, S.; Pilat, F.; Bottura, L.; Sabbi, G.

1999-01-01

The US-LHC Magnet Database is designed for production-magnet quality assurance, field and alignment error impact analysis, cryostat assembly assistance, and ring installation assistance. The database consists of tables designed to store magnet field and alignment measurements data and quench data. This information will also be essential for future machine operations including local IR corrections

Global Ocean Surface Water Partial Pressure of CO₂ Database: Measurements Performed During 1968-2007 (Version 2007)

Energy Technology Data Exchange (ETDEWEB)

Kozyr, Alex [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Carbon Dioxide Information Analysis Center

2008-09-30

More than 4.1 million measurements of surface water partial pressure of CO₂ obtained over the global oceans during 1968-2007 are listed in the Lamont-Doherty Earth Observatory (LDEO) database, which includes open ocean and coastal water measurements. The data assembled include only those measured by equilibrator-CO₂ analyzer systems and have been quality-controlled based on the stability of the system performance, the reliability of calibrations for CO₂ analysis, and the internal consistency of data. To allow re-examination of the data in the future, a number of measured parameters relevant to pCO₂ measurements are listed. The overall uncertainty for the pCO₂ values listed is estimated to be ± 2.5 µatm on the average. For simplicity and for ease of reference, this version is referred to as 2007, meaning that data collected through 31 December 2007 has been included. It is our intention to update this database annually. There are 37 new cruise/ship files in this update. In addition, some editing has been performed on existing files so this should be considered a V2007 file. Also we have added a column reporting the partial pressure of CO₂ in seawater in units of Pascals. The data presented in this database include the analyses of partial pressure of CO₂ (pCO₂), sea surface temperature (SST), sea surface salinity (SSS), pressure of the equilibration, and barometric pressure in the outside air from the ship’s observation system. The global pCO₂ data set is available free of charge as a numeric data package (NDP) from the Carbon Dioxide Information Analysis Center (CDIAC). The NDP consists of the oceanographic data files and this printed documentation, which describes the procedures and methods used to obtain the data.

A global database of sap flow measurements (SAPFLUXNET) to link plant and ecosystem physiology

Science.gov (United States)

Poyatos, Rafael; Granda, Víctor; Flo, Víctor; Molowny-Horas, Roberto; Mencuccini, Maurizio; Oren, Ram; Katul, Gabriel; Mahecha, Miguel; Steppe, Kathy; Martínez-Vilalta, Jordi

2017-04-01

Regional and global networks of ecosystem CO2 and water flux monitoring have dramatically increased our understanding of ecosystem functioning in the last 20 years. More recently, analyses of ecosystem-level fluxes have successfully incorporated data streams at coarser (remote sensing) and finer (plant traits) organisational scales. However, there are few data sources that capture the diel to seasonal dynamics of whole-plant physiology and that can provide a link between organism- and ecosystem-level function. Sap flow measured in plant stems reveals the temporal patterns in plant water transport, as mediated by stomatal regulation and hydraulic architecture. The widespread use of thermometric methods of sap flow measurement since the 1990s has resulted in numerous data sets for hundreds of species and sites worldwide, but these data have remained fragmentary and generally unavailable for syntheses of regional to global scope. We are compiling the first global database of sub-daily sap flow measurements in individual plants (SAPFLUXNET), aimed at unravelling the environmental and biotic drivers of plant transpiration regulation globally. I will present the SAPFLUXNET data infrastructure and workflow, which is built upon flexible, open-source computing tools within the R environment (dedicated R packages and classes, interactive documents and apps with Rmarkdown and Shiny). Data collection started in mid-2016, we have already incorporated > 50 datasets representing > 40 species and > 350 individual plants, globally distributed, and the number of contributed data sets is increasing rapidly. I will provide a general overview of the distribution of available data sets according to climate, measurement method, species, functional groups and plant size attributes. In parallel to the sap flow data compilation, we have also collated published results from calibrations of sap flow methods, to provide a first quantification on the variability associated with different sap

Database Description - RMOS | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available base Description General information of database Database name RMOS Alternative nam...arch Unit Shoshi Kikuchi E-mail : Database classification Plant databases - Rice Microarray Data and other Gene Expression Database...s Organism Taxonomy Name: Oryza sativa Taxonomy ID: 4530 Database description The Ric...19&lang=en Whole data download - Referenced database Rice Expression Database (RED) Rice full-length cDNA Database... (KOME) Rice Genome Integrated Map Database (INE) Rice Mutant Panel Database (Tos17) Rice Genome Annotation Database

A KINETIC DATABASE FOR ASTROCHEMISTRY (KIDA)

International Nuclear Information System (INIS)

Wakelam, V.; Pavone, B.; Hébrard, E.; Hersant, F.; Herbst, E.; Loison, J.-C.; Chandrasekaran, V.; Bergeat, A.; Smith, I. W. M.; Adams, N. G.; Bacchus-Montabonel, M.-C.; Béroff, K.; Bierbaum, V. M.; Chabot, M.; Dalgarno, A.; Van Dishoeck, E. F.; Faure, A.; Geppert, W. D.; Gerlich, D.; Galli, D.

2012-01-01

We present a novel chemical database for gas-phase astrochemistry. Named the KInetic Database for Astrochemistry (KIDA), this database consists of gas-phase reactions with rate coefficients and uncertainties that will be vetted to the greatest extent possible. Submissions of measured and calculated rate coefficients are welcome, and will be studied by experts before inclusion into the database. Besides providing kinetic information for the interstellar medium, KIDA is planned to contain such data for planetary atmospheres and for circumstellar envelopes. Each year, a subset of the reactions in the database (kida.uva) will be provided as a network for the simulation of the chemistry of dense interstellar clouds with temperatures between 10 K and 300 K. We also provide a code, named Nahoon, to study the time-dependent gas-phase chemistry of zero-dimensional and one-dimensional interstellar sources.

KALIMER database development (database configuration and design methodology)

International Nuclear Information System (INIS)

Jeong, Kwan Seong; Kwon, Young Min; Lee, Young Bum; Chang, Won Pyo; Hahn, Do Hee

2001-10-01

KALIMER Database is an advanced database to utilize the integration management for Liquid Metal Reactor Design Technology Development using Web Applicatins. KALIMER Design database consists of Results Database, Inter-Office Communication (IOC), and 3D CAD database, Team Cooperation system, and Reserved Documents, Results Database is a research results database during phase II for Liquid Metal Reactor Design Technology Develpment of mid-term and long-term nuclear R and D. IOC is a linkage control system inter sub project to share and integrate the research results for KALIMER. 3D CAD Database is s schematic design overview for KALIMER. Team Cooperation System is to inform team member of research cooperation and meetings. Finally, KALIMER Reserved Documents is developed to manage collected data and several documents since project accomplishment. This report describes the features of Hardware and Software and the Database Design Methodology for KALIMER

Managing Rock and Paleomagnetic Data Flow with the MagIC Database: from Measurement and Analysis to Comprehensive Archive and Visualization

Science.gov (United States)

Koppers, A. A.; Minnett, R. C.; Tauxe, L.; Constable, C.; Donadini, F.

2008-12-01

The Magnetics Information Consortium (MagIC) is commissioned to implement and maintain an online portal to a relational database populated by rock and paleomagnetic data. The goal of MagIC is to archive all measurements and derived properties for studies of paleomagnetic directions (inclination, declination) and intensities, and for rock magnetic experiments (hysteresis, remanence, susceptibility, anisotropy). Organizing data for presentation in peer-reviewed publications or for ingestion into databases is a time-consuming task, and to facilitate these activities, three tightly integrated tools have been developed: MagIC-PY, the MagIC Console Software, and the MagIC Online Database. A suite of Python scripts is available to help users port their data into the MagIC data format. They allow the user to add important metadata, perform basic interpretations, and average results at the specimen, sample and site levels. These scripts have been validated for use as Open Source software under the UNIX, Linux, PC and Macintosh© operating systems. We have also developed the MagIC Console Software program to assist in collating rock and paleomagnetic data for upload to the MagIC database. The program runs in Microsoft Excel© on both Macintosh© computers and PCs. It performs routine consistency checks on data entries, and assists users in preparing data for uploading into the online MagIC database. The MagIC website is hosted under EarthRef.org at http://earthref.org/MAGIC/ and has two search nodes, one for paleomagnetism and one for rock magnetism. Both nodes provide query building based on location, reference, methods applied, material type and geological age, as well as a visual FlashMap interface to browse and select locations. Users can also browse the database by data type (inclination, intensity, VGP, hysteresis, susceptibility) or by data compilation to view all contributions associated with previous databases, such as PINT, GMPDB or TAFI or other user

Bibliometric analysis of the Korean Journal of Parasitology: measured from SCI, PubMed, Scopus, and Synapse databases.

Science.gov (United States)

Lee, Choon Shil

2009-10-01

The Korean Journal of Parasitology (KJP) is the official journal of the Korean Society for Parasitology which is celebrating its 50th anniversary in 2009. To assess the contributions and achievements of the KJP, bibliometric analysis was conducted based on the citation data retrieved from 4 major databases; SCI, PubMed, Synapse, and Scopus. It was found that the KJP articles were constantly cited by the articles published in major international journals represented in these databases. More than 60% of 1,370 articles published in the KJP from 1963 to June 2009 were cited at least once by SCI articles. The overall average times cited by SCI articles are 2.6. The rate is almost 3 times higher for the articles published in the last 10 years compared to 1.0 for the articles of the 1960s. The SCI journal impact factor for 2008 is calculated as 0.871. It is increasing and it is expected to increase further with the introduction of the KJP in the database in 2008. The more realistic h-indices were measured from the study data set covering all the citations to the KJP; 17 for SCI, 6 for PubMed, 19 for Synapse, and 17 for Scopus. Synapse extensively picked up the citations to the earlier papers not retrievable from the other 3 databases. It identified many papers published in the 1960s and in the 1980s which have been cited heavily, proving the central role of the KJP in the dissemination of the important research findings over the last 5 decades.

[Electormagnetic field of the mobile phone base station: case study].

Science.gov (United States)

Bieńkowski, Paweł; Zubrzak, Bartłomiej; Surma, Robert

2011-01-01

The paper presents changes in the electromagnetic field intensity in a school building and its surrounding after the mobile phone base station installation on the roof of the school. The comparison of EMF intensity measured before the base station was launched (electromagnetic background measurement) and after starting its operation (two independent control measurements) is discussed. Analyses of measurements are presented and the authors also propose the method of the electromagnetic field distribution adjustment in the area of radiation antennas side lobe to reduce the intensity of the EMF level in the base station proximity. The presented method involves the regulation of the inclination. On the basis of the measurements, it was found that the EMF intensity increased in the building and its surroundings, but the values measured with wide margins meet the requirements of the Polish law on environmental protection.

Use of portable exposimeters to monitor radiofrequency electromagnetic field exposure in the everyday environment.

Science.gov (United States)

Sagar, Sanjay; Struchen, Benjamin; Finta, Viktoria; Eeftens, Marloes; Röösli, Martin

2016-10-01

Spatial and temporal distribution of radiofrequency electromagnetic field (RF-EMF) levels in the environment is highly heterogeneous. It is thus not entirely clear how to monitor spatial variability and temporal trends of RF-EMF exposure levels in the environment in a representative and efficient manner. The aim of this study was to test a monitoring protocol for RF-EMF measurements in public areas using portable devices. Using the ExpoM-RF devices mounted on a backpack, we have conducted RF-EMF measurements by walking through 51 different outdoor microenvironments from 20 different municipalities in Switzerland: 5 different city centers, 5 central residential areas, 5 non-central residential areas, 15 rural residential areas, 15 rural centers and 6 industrial areas. Measurements in public transport (buses, trains, trams) were collected when traveling between the areas. Measurements were conducted between 25th March and 11th July 2014. In order to evaluate spatial representativity within one microenvironment, we measured two crossing paths of about 1km in length in each microenvironment. To evaluate repeatability, measurements in each microenvironment were repeated after two to four months on the same paths. Mean RF-EMF exposure (sum of 15 main frequency bands between 87.5 and 5,875MHz) was 0.53V/m in industrial zones, 0.47V/m in city centers, 0.32V/m in central residential areas, 0.25V/m non-central residential areas, 0.23V/m in rural centers and rural residential areas, 0.69V/m in trams, 0.46V/m in trains and 0.39V/m in buses. Major exposure contribution at outdoor locations was from mobile phone base stations (>80% for all outdoor areas with respect to the power density scale). Temporal correlation between first and second measurement of each area was high: 0.89 for total RF-EMF, 0.90 for all five mobile phone downlink bands combined, 0.51 for all five uplink bands combined and 0.79 for broadcasting. Spearman correlation between arithmetic mean values of the

LabData database sub-systems for post-processing and quality control of stable isotope and gas chromatography measurements

Science.gov (United States)

Suckow, A. O.

2013-12-01

Measurements need post-processing to obtain results that are comparable between laboratories. Raw data may need to be corrected for blank, memory, drift (change of reference values with time), linearity (dependence of reference on signal height) and normalized to international reference materials. Post-processing parameters need to be stored for traceability of results. State of the art stable isotope correction schemes are available based on MS Excel (Geldern and Barth, 2012; Gröning, 2011) or MS Access (Coplen, 1998). These are specialized to stable isotope measurements only, often only to the post-processing of a special run. Embedding of algorithms into a multipurpose database system was missing. This is necessary to combine results of different tracers (3H, 3He, 2H, 18O, CFCs, SF6...) or geochronological tools (Sediment dating e.g. with 210Pb, 137Cs), to relate to attribute data (submitter, batch, project, geographical origin, depth in core, well information etc.) and for further interpretation tools (e.g. lumped parameter modelling). Database sub-systems to the LabData laboratory management system (Suckow and Dumke, 2001) are presented for stable isotopes and for gas chromatographic CFC and SF6 measurements. The sub-system for stable isotopes allows the following post-processing: 1. automated import from measurement software (Isodat, Picarro, LGR), 2. correction for sample-to sample memory, linearity, drift, and renormalization of the raw data. The sub-system for gas chromatography covers: 1. storage of all raw data 2. storage of peak integration parameters 3. correction for blank, efficiency and linearity The user interface allows interactive and graphical control of the post-processing and all corrections by export to and plot in MS Excel and is a valuable tool for quality control. The sub-databases are integrated into LabData, a multi-user client server architecture using MS SQL server as back-end and an MS Access front-end and installed in four

The Danish Depression Database

DEFF Research Database (Denmark)

Videbech, Poul Bror Hemming; Deleuran, Anette

2016-01-01

AIM OF DATABASE: The purpose of the Danish Depression Database (DDD) is to monitor and facilitate the improvement of the quality of the treatment of depression in Denmark. Furthermore, the DDD has been designed to facilitate research. STUDY POPULATION: Inpatients as well as outpatients...... with depression, aged above 18 years, and treated in the public psychiatric hospital system were enrolled. MAIN VARIABLES: Variables include whether the patient has been thoroughly somatically examined and has been interviewed about the psychopathology by a specialist in psychiatry. The Hamilton score as well...... as an evaluation of the risk of suicide are measured before and after treatment. Whether psychiatric aftercare has been scheduled for inpatients and the rate of rehospitalization are also registered. DESCRIPTIVE DATA: The database was launched in 2011. Every year since then ~5,500 inpatients and 7,500 outpatients...

The pattern of the electromagnetic field emitted by mobile phones in motor vehicle driving simulators

Directory of Open Access Journals (Sweden)

Piotr Politański

2013-06-01

Full Text Available Introduction: The paper reports the results of the determinations of UMTS EMF distributions in the driver's cab of motor vehicle simulators. The results will serve as the basis for future research on the influence of EMF emitted by mobile phones on driver physiology. Materials and Methods: Two motor vehicle driving simulators were monitored, while an EMF source was placed at the driver's head or on the dashboard of the motor vehicle driving simulator. For every applied configuration, the maximal electric field strength was measured, as were the values at 16 points corresponding to chosen locations on a driver's or passenger's body. Results: When the power was set for the maximum (49 mW, a value of 27 V/m was measured in the vicinity of the driver's head when the phone was close to the head. With the same power, when the phone was placed on the dashboard, the measured maximum was 15.2 V/m in the vicinity of the driver's foot. Similar results were obtained for the passenger. Significant perturbations in EMF distribution and an increase in electric field strength values in the motor vehicle driving simulator were also observed in comparison to free space measurements, and the electric field strength was up to 3 times higher inside the simulator. Conclusions: This study can act as the basis of future studies concerning the influence of the EMF emitted by mobile phones on the physiology of the driver. Additionally, the authors postulate that it is advisable to keep mobile phones at a distance from the head, i.e. use, whenever possible, hands-free kits to reduce EMF exposure, both for drivers and passengers.

Measurement of Vertical Oil-in-water Two-phase Flow Using Dual-modality ERT-EMF System

OpenAIRE

Faraj, Yousef; Wang, Mi; Jia, Jiabin; Wang, Qiang; Xie, Cheng-gang; Oddie, Gary; Primrose , Ken; Qiu, Changhua

2015-01-01

Oil-in-water two-phase flows are often encountered in the upstream petroleum industry. The measurement of phase flow rates is of particular importance for managing oil production and water disposal and/or water reinjection. The complexity of oil-in-water flow structures creates a challenge to flow measurement. This paper proposes a new method of two-phase flow metering, which is based on the use of dual-modality system and multidimensional data fusion. The Electrical Resistance Tomography sys...

Database Description - SAHG | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available base Description General information of database Database name SAHG Alternative nam...h: Contact address Chie Motono Tel : +81-3-3599-8067 E-mail : Database classification Structure Databases - ...e databases - Protein properties Organism Taxonomy Name: Homo sapiens Taxonomy ID: 9606 Database description... Links: Original website information Database maintenance site The Molecular Profiling Research Center for D...stration Not available About This Database Database Description Download License Update History of This Database Site Policy | Contact Us Database Description - SAHG | LSDB Archive ...

The use of the thermo-emf method to investigate the reversibility of gas cell electrodes with the ZrO2+Y2O3 electrolyte in the gaseous phase of any composition

International Nuclear Information System (INIS)

Perfil'ev, M.V.; Fadeev, G.I.

1980-01-01

The possibility of using the thermo-e.m.f. method to determine the minimum temperature at which the electrode potential of solid electrolyte sells remains equilibrium relatively to the gaseous phase in the atmospheres of the arbitrary composition, is considered. The above method and the method of concentration e.m.f. have been used to determine maximum temperatures of reversibility of powder platinum electrodes in the CO+CO 2 atmosphere with CO 2 content from 5 to 95%. Both methods are shown to produce similar results. It is supposed that the reason for the deviation of electrode potential from the equilibrium value at low temperatures is the absence of equilibrium between the gaseous phase and the adsorption layer. Parameters which are included in the equation for thermo-e.m.f. in any atmosphere are determined for the electrolyte of the 0.93 ZrO 2 +0.07 Y 2 O 3 composition. Oxygen vacancies are shown to interact with the formation of complexes at measurement temperatures of 300 deg-800 deg C

The Solubility of metal oxides in molten carbonates - why the acid-basic chemistry fails?

DEFF Research Database (Denmark)

Bjerrum, Niels; Qingfeng, Li; Borup, Flemming

1999-01-01

Solubilities of various metal oxides in molten Li/K carbonates have been measured at 650°C under carbon dioxide atmosphere. It is found that the solubility of NiO and PbO decreases with increasing lithium mole fraction and decreasing CO2 partial pressure. On the other hand, the emf measurement...... shows opposite effects, i.e., decreasing CO2 pressure leads to more negative emf values but increasing lithium content gives more positive emf values. This contradiction is explained by means of a complex formation model. The possible species for lead are proposed to be [Pb(CO3)2]-2 and/or [Pb(CO3) 3...

Database Description - PSCDB | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available abase Description General information of database Database name PSCDB Alternative n...rial Science and Technology (AIST) Takayuki Amemiya E-mail: Database classification Structure Databases - Protein structure Database...554-D558. External Links: Original website information Database maintenance site Graduate School of Informat...available URL of Web services - Need for user registration Not available About This Database Database Descri...ption Download License Update History of This Database Site Policy | Contact Us Database Description - PSCDB | LSDB Archive ...

Database Description - ASTRA | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available abase Description General information of database Database name ASTRA Alternative n...tics Journal Search: Contact address Database classification Nucleotide Sequence Databases - Gene structure,...3702 Taxonomy Name: Oryza sativa Taxonomy ID: 4530 Database description The database represents classified p...(10):1211-6. External Links: Original website information Database maintenance site National Institute of Ad... for user registration Not available About This Database Database Description Dow

Neurovascular Network Explorer 1.0: a database of 2-photon single-vessel diameter measurements with MATLAB(®) graphical user interface.

Science.gov (United States)

Sridhar, Vishnu B; Tian, Peifang; Dale, Anders M; Devor, Anna; Saisan, Payam A

2014-01-01

We present a database client software-Neurovascular Network Explorer 1.0 (NNE 1.0)-that uses MATLAB(®) based Graphical User Interface (GUI) for interaction with a database of 2-photon single-vessel diameter measurements from our previous publication (Tian et al., 2010). These data are of particular interest for modeling the hemodynamic response. NNE 1.0 is downloaded by the user and then runs either as a MATLAB script or as a standalone program on a Windows platform. The GUI allows browsing the database according to parameters specified by the user, simple manipulation and visualization of the retrieved records (such as averaging and peak-normalization), and export of the results. Further, we provide NNE 1.0 source code. With this source code, the user can database their own experimental results, given the appropriate data structure and naming conventions, and thus share their data in a user-friendly format with other investigators. NNE 1.0 provides an example of seamless and low-cost solution for sharing of experimental data by a regular size neuroscience laboratory and may serve as a general template, facilitating dissemination of biological results and accelerating data-driven modeling approaches.

Knowledge based literature data base on the effect of electromagnetic fields on the organism and implants; Wissensbasierte Literaturdatenbank ueber die Einwirkungen elektromagnetischer Felder auf den Orgnismus und auf Implantate

Energy Technology Data Exchange (ETDEWEB)

Wienert, Roman; Dechent, Dagmar; Silny, Jiri

2005-07-01

The ''EMF-Portal'' is an Internet-based information platform in the research area of non-ionizing radiation effects. It is supplied by a variety of linked information sources and it provides scientific knowledge based on the results of at present approx. 7.700 (mainly peer-reviewed) publications related to bioelectromagnetic interaction. Different help tools support the interested user in both finding and interpreting relevant data. The EMF-Portal is multi-lingual: English and German are currently supported, other languages can be added. It is the aim of the portal to enable all users, regardless of their education or occupation, to ask complex questions about EMF and their effects and to receive specific and comprehensive answers. Assisted by an interdisciplinary glossary and a database of everyday's exposure sources, as well as an in-depth literature database, the user obtains a dynamically generated answer based on the results of all related publication data. The answer may consist of either a list of corresponding literature references or of different types of statistics e.g. regarding investigated endpoints. The Information System consists of two main components: The knowledge based literature database (a.k.a. WBLDB) and the EMF-Portal. The WBLDB contains most of the relevant scientific literature published so far. In addition to the publication data, the descriptors (exposure, methods, results etc.) of each study are extracted. With the help of this database the user has detailed insight into individual publications without having to read the full text, and he can produce statistical overviews over corresponding related studies as well as an objective comparison between different publications. The EMF-Portal which is the subject of this research project consists of the following modules: The interdisciplinary glossary comprehensively explains related biological, medical, epidemiological, technical or dosimetric terms. The database of

Database Description - RPD | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available ase Description General information of database Database name RPD Alternative name Rice Proteome Database...titute of Crop Science, National Agriculture and Food Research Organization Setsuko Komatsu E-mail: Database... classification Proteomics Resources Plant databases - Rice Organism Taxonomy Name: Oryza sativa Taxonomy ID: 4530 Database... description Rice Proteome Database contains information on protei...and entered in the Rice Proteome Database. The database is searchable by keyword,

Database Description - PLACE | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available abase Description General information of database Database name PLACE Alternative name A Database...Kannondai, Tsukuba, Ibaraki 305-8602, Japan National Institute of Agrobiological Sciences E-mail : Databas...e classification Plant databases Organism Taxonomy Name: Tracheophyta Taxonomy ID: 58023 Database...99, Vol.27, No.1 :297-300 External Links: Original website information Database maintenance site National In...- Need for user registration Not available About This Database Database Descripti

Effects of electromagnetic fields on bone loss in hyperthyroidism rat model.

Science.gov (United States)

Liu, Chaoxu; Zhang, Yingchi; Fu, Tao; Liu, Yang; Wei, Sheng; Yang, Yong; Zhao, Dongming; Zhao, Wenchun; Song, Mingyu; Tang, Xiangyu; Wu, Hua

2017-02-01

Optimal therapeutics for hyperthyroidism-induced osteoporosis are still lacking. As a noninvasive treatment, electromagnetic fields (EMF) have been proven to be effective for treating osteoporosis in non-hyperthyroidism conditions. We herein systematically evaluated the reduced effects of EMF on osteoporosis in a hyperthyroidism rat model. With the use of Helmholtz coils and an EMF stimulator, 15 Hz/1 mT EMF was generated. Forty-eight 5-month-old male Sprague-Dawley rats were randomly divided into four different groups: control, levothyroxine treated (L-T4), EMF exposure + levothyroxine (EMF + L-T4), and EMF exposure without levothyroxine administration (EMF). All rats were treated with L-T4 (100 mg/day) except those in control and EMF groups. After 12 weeks, the results obtained from bone mineral density analyses and bone mechanical measurements showed significant differences between L-T4 and EMF + L-T4 groups. Micro CT and bone histomorphometric analyses indicated that trabecular bone mass and architecture in distal femur and proximal tibia were augmented and restored partially in EMF + L-T4 group. In addition, bone thyroid hormone receptors (THR) expression of hyperthyroidism rats was attenuated in EMF + L-T4 group, compared to control group, which was not observed in L-T4 group. According to these results, we concluded that 15 Hz/1 mT EMF significantly inhibited bone loss and micro architecture deterioration in hyperthyroidism rats, which might occur due to reduced THR expression caused by EMF exposure. Bioelectromagnetics. 38:137-150, 2017. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

International Shock-Wave Database: Current Status

Science.gov (United States)

Levashov, Pavel

2013-06-01

Shock-wave and related dynamic material response data serve for calibrating, validating, and improving material models over very broad regions of the pressure-temperature-density phase space. Since the middle of the 20th century vast amount of shock-wave experimental information has been obtained. To systemize it a number of compendiums of shock-wave data has been issued by LLNL, LANL (USA), CEA (France), IPCP and VNIIEF (Russia). In mid-90th the drawbacks of the paper handbooks became obvious, so the first version of the online shock-wave database appeared in 1997 (http://www.ficp.ac.ru/rusbank). It includes approximately 20000 experimental points on shock compression, adiabatic expansion, measurements of sound velocity behind the shock front and free-surface-velocity for more than 650 substances. This is still a useful tool for the shock-wave community, but it has a number of serious disadvantages which can't be easily eliminated: (i) very simple data format for points and references; (ii) minimalistic user interface for data addition; (iii) absence of history of changes; (iv) bad feedback from users. The new International Shock-Wave database (ISWdb) is intended to solve these and some other problems. The ISWdb project objectives are: (i) to develop a database on thermodynamic and mechanical properties of materials under conditions of shock-wave and other dynamic loadings, selected related quantities of interest, and the meta-data that describes the provenance of the measurements and material models; and (ii) to make this database available internationally through the Internet, in an interactive form. The development and operation of the ISWdb is guided by an advisory committee. The database will be installed on two mirrored web-servers, one in Russia and the other in USA (currently only one server is available). The database provides access to original experimental data on shock compression, non-shock dynamic loadings, isentropic expansion, measurements of sound

Current Understanding of the Health Effects of Electromagnetic Fields.

Science.gov (United States)

Miah, Tayaba; Kamat, Deepak

2017-04-01

There has been an exponential increase in the use of electronic devices over the past few decades. This has led to increased exposure to electromagnetic fields (EMF). Electric fields result from differences in voltage, whereas magnetic fields result from the flow of electric current. Higher-frequency waves of EMF have more energy than lower-frequency waves, and thus generally tend to be more harmful. An EMF activates cellular stress response and also causes breaks in DNA strands. There are many methodological barriers to effectively measuring the associations of EMF and childhood cancers. The consensus from multiple studies is that there is no causal role of extremely low-frequency EMFs in childhood cancers, including brain cancer. A recent study showed a link between EMF radiation and the development of malignant tumors in rats. In light of that study, the American Academy of Pediatrics set out new recommendations to decrease the adverse effects of cellphone exposure on children. [Pediatr Ann. 2017;46(4):e172-e174.]. Copyright 2017, SLACK Incorporated.

SAPFLUXNET: towards a global database of sap flow measurements.

Science.gov (United States)

Poyatos, Rafael; Granda, Víctor; Molowny-Horas, Roberto; Mencuccini, Maurizio; Steppe, Kathy; Martínez-Vilalta, Jordi

2016-12-01

Plant transpiration is the main evaporative flux from terrestrial ecosystems; it controls land surface energy balance, determines catchment hydrological responses and influences regional and global climate. Transpiration regulation by plants is a key (and still not completely understood) process that underlies vegetation drought responses and land evaporative fluxes under global change scenarios. Thermometric methods of sap flow measurement have now been widely used to quantify whole-plant and stand transpiration in forests, shrublands and orchards around the world. A large body of research has applied sap flow methods to analyse seasonal and diurnal patterns of transpiration and to quantify their responses to hydroclimatic variability, but syntheses of sap flow data at regional to global scales are extremely rare. Here we present the SAPFLUXNET initiative, aimed at building the first global database of plant-level sap flow measurements. A preliminary metadata survey launched in December 2015 showed an encouraging response by the sap flow community, with sap flow data sets from field studies representing >160 species and >120 globally distributed sites. The main goal of SAPFLUXNET is to analyse the ecological factors driving plant- and stand-level transpiration. SAPFLUXNET will open promising research avenues at an unprecedented global scope, namely: (i) exploring the spatio-temporal variability of plant transpiration and its relationship with plant and stand attributes, (ii) summarizing physiological regulation of transpiration by means of few water-use traits, usable for land surface models, (iii) improving our understanding of the coordination between gas exchange and plant-level traits (e.g., hydraulics) and (iv) analysing the ecological factors controlling stand transpiration and evapotranspiration partitioning. Finally, SAPFLUXNET can provide a benchmark to test models of physiological controls of transpiration, contributing to improve the accuracy of

Database Description - JSNP | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available base Description General information of database Database name JSNP Alternative nam...n Science and Technology Agency Creator Affiliation: Contact address E-mail : Database...sapiens Taxonomy ID: 9606 Database description A database of about 197,000 polymorphisms in Japanese populat...1):605-610 External Links: Original website information Database maintenance site Institute of Medical Scien...er registration Not available About This Database Database Description Download License Update History of This Database

Database Description - RED | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available ase Description General information of database Database name RED Alternative name Rice Expression Database...enome Research Unit Shoshi Kikuchi E-mail : Database classification Plant databases - Rice Database classifi...cation Microarray, Gene Expression Organism Taxonomy Name: Oryza sativa Taxonomy ID: 4530 Database descripti... Article title: Rice Expression Database: the gateway to rice functional genomics...nt Science (2002) Dec 7 (12):563-564 External Links: Original website information Database maintenance site

Design of a sun tracker for the automatic measurement of spectral irradiance and construction of an irradiance database in the 330-1100 nm range

Energy Technology Data Exchange (ETDEWEB)

Canada, J.; Maj, A. [Departamento de Termodinamica Aplicada, Universidad Politecnica de Valencia, Camino de Vera, s/n. 46022 Valencia (Spain); Utrillas, M.P.; Martinez-Lozano, J.A.; Pedros, R.; Gomez-Amo, J.L. [Departamento de Fisica de la Tierra y Termodinamica, Facultat de Fisica, Universitat de Valencia, 46100 Burjassot (Valencia) (Spain)

2007-10-15

An automatic global and direct solar spectral irradiance system has been designed based on two LICOR spectro radiometers equipped with fibre optics and remote cosine sensors. To measure direct irradiance a sun tracker based on step motors has been developed. The whole system is autonomous and works continuously. From the measurements provided by this system a spectral irradiance database in the 330-1100 nm range has been created. This database contains normal direct and global horizontal irradiances as well as diffuse irradiance on a horizontal plane, together with total atmospheric optical thickness and aerosol optical depth. (author)

Database Description - ConfC | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available abase Description General information of database Database name ConfC Alternative name Database...amotsu Noguchi Tel: 042-495-8736 E-mail: Database classification Structure Database...s - Protein structure Structure Databases - Small molecules Structure Databases - Nucleic acid structure Database... services - Need for user registration - About This Database Database Description Download License Update History of This Database... Site Policy | Contact Us Database Description - ConfC | LSDB Archive ...

DIII-D edge physics database

International Nuclear Information System (INIS)

Jong, R.A.; Porter, G.D.; Hill, D.N.; Buchenauer, D.A.; Bramson, G.

1992-03-01

We have developed an edge-physics database containing data for the plasma in the divertor region and the scrape-off layer (SOL) for the DIII-D tokamak. The database provides many of the parameters necessary to model the power flow to the divertor and other plasma processes in the plasma edge. It will also facilitate the analysis of DIII-D data for comparison with other divertor tokamaks. In addition to the core plasma parameters, edge-specific data are included in this database. Initial results using the database show good agreement between the pressure profiles measured by the Langmuir probes and those determined from the Thomson data for the inner strike point, but not for the outer strike point region. We also find that the ratio of separatrix density to average core density, as well as the in/out asymmetry in the SOL power at the divertor in DIII-D do not agree with values currently assumed in modeling the International Thermonuclear Experimental Reactor (ITER)

Database management systems understanding and applying database technology

CERN Document Server

Gorman, Michael M

1991-01-01

Database Management Systems: Understanding and Applying Database Technology focuses on the processes, methodologies, techniques, and approaches involved in database management systems (DBMSs).The book first takes a look at ANSI database standards and DBMS applications and components. Discussion focus on application components and DBMS components, implementing the dynamic relationship application, problems and benefits of dynamic relationship DBMSs, nature of a dynamic relationship application, ANSI/NDL, and DBMS standards. The manuscript then ponders on logical database, interrogation, and phy

The Danish Prostate Cancer Database

DEFF Research Database (Denmark)

Nguyen-Nielsen, Mary; Høyer, Søren; Friis, Søren

2016-01-01

variables include Gleason scores, cancer staging, prostate-specific antigen values, and therapeutic measures (active surveillance, surgery, radiotherapy, endocrine therapy, and chemotherapy). DESCRIPTIVE DATA: In total, 22,332 patients with prostate cancer were registered in DAPROCAdata as of April 2015......AIM OF DATABASE: The Danish Prostate Cancer Database (DAPROCAdata) is a nationwide clinical cancer database that has prospectively collected data on patients with incident prostate cancer in Denmark since February 2010. The overall aim of the DAPROCAdata is to improve the quality of prostate cancer...... care in Denmark by systematically collecting key clinical variables for the purposes of health care monitoring, quality improvement, and research. STUDY POPULATION: All Danish patients with histologically verified prostate cancer are included in the DAPROCAdata. MAIN VARIABLES: The DAPROCAdata...

A Components Database Design and Implementation for Accelerators and Detectors

International Nuclear Information System (INIS)

Chan, A.; Meyer, S.

2011-01-01

Many accelerator and detector systems being fabricated for the PEP-II Accelerator and BABAR Detector needed configuration control and calibration measurements tracked for their components. Instead of building a database for each distinct system, a Components Database was designed and implemented that can encompass any type of component and any type of measurement. In this paper we describe this database design that is especially suited for the engineering and fabrication processes of the accelerator and detector environments where there are thousands of unique component types. We give examples of information stored in the Components Database, which includes accelerator configuration, calibration measurements, fabrication history, design specifications, inventory, etc. The World Wide Web interface is used to access the data, and templates are available for international collaborations to collect data off-line.

SENSITIVITY OF PIGMENT CONTENT OF BANANA AND ORCHID TISSUE CULTURE EXPOSED TO EXTREMELY LOW FREQUENCY ELECTROMAGNETIC FIEL

Directory of Open Access Journals (Sweden)

Riry Prihatini

2017-01-01

Full Text Available Natural exposure of extremely low frequency electromagnetic field (ELF-EMF occurs in the environment and acts as one of the abiotic factors that affect the growth and development of organisms. This study was conducted to determine the effect of ELF-EMF on the tissue cultured banana and slipper orchid chlorophyll content as one of the indicators in measuring plant photosynthetic capacity. Four days old banana (Musa sp. cv. Berangan corm and seven days old slipper orchid (Paphiopedilum rothschildianum cultures were exposed to 6 and 12 mT ELF-EMF generated by controllable ELF-EMF built up machine for 0.5, 1, 2 and 4 hours. After exposure, the banana and orchid cultures were incubated at 25° C for 8 and 16 weeks, respectively. The results showed that the ELF-EMF exposure had different effects on banana and slipper orchid cultures though both plant species belong to monocotyledon. The highest increase in chlorophyll content on banana was resulted by the high intensity and long duration of ELF-EMF exposure (12 mT for 4 hours, whereas on slipper orchid the modest and short duration of ELF-EMF exposure produced the most excessive chlorophyll content. Different ELF-EMF exposures (12 mT for 4 hours and 6 mT for 30 minutes had potential to be applied on each plant to improve in vitro plant (banana and slipper orchid, respectively growth. The increased chlorophyll and carotene/xanthophyll content on banana indicated that the banana was more tolerant to ELF-EMF exposure compared to slipper orchid. 

Effects of short-term W-CDMA mobile phone base station exposure on women with or without mobile phone related symptoms.

Science.gov (United States)

Furubayashi, Toshiaki; Ushiyama, Akira; Terao, Yasuo; Mizuno, Yoko; Shirasawa, Kei; Pongpaibool, Pornanong; Simba, Ally Y; Wake, Kanako; Nishikawa, Masami; Miyawaki, Kaori; Yasuda, Asako; Uchiyama, Mitsunori; Yamashita, Hitomi Kobayashi; Masuda, Hiroshi; Hirota, Shogo; Takahashi, Miyuki; Okano, Tomoko; Inomata-Terada, Satomi; Sokejima, Shigeru; Maruyama, Eiji; Watanabe, Soichi; Taki, Masao; Ohkubo, Chiyoji; Ugawa, Yoshikazu

2009-02-01

To investigate possible health effects of mobile phone use, we conducted a double-blind, cross-over provocation study to confirm whether subjects with mobile phone related symptoms (MPRS) are more susceptible than control subjects to the effect of electromagnetic fields (EMF) emitted from base stations. We sent questionnaires to 5,000 women and obtained 2,472 valid responses from possible candidates; from these, we recruited 11 subjects with MPRS and 43 controls. There were four EMF exposure conditions, each of which lasted 30 min: continuous, intermittent, and sham exposure with and without noise. Subjects were exposed to EMF of 2.14 GHz, 10 V/m (W-CDMA), in a shielded room to simulate whole-body exposure to EMF from base stations, although the exposure strength we used was higher than that commonly received from base stations. We measured several psychological and cognitive parameters pre- and post-exposure, and monitored autonomic functions. Subjects were asked to report on their perception of EMF and level of discomfort during the experiment. The MPRS group did not differ from the controls in their ability to detect exposure to EMF; nevertheless they consistently experienced more discomfort, regardless of whether or not they were actually exposed to EMF, and despite the lack of significant changes in their autonomic functions. Thus, the two groups did not differ in their responses to real or sham EMF exposure according to any psychological, cognitive or autonomic assessment. In conclusion, we found no evidence of any causal link between hypersensitivity symptoms and exposure to EMF from base stations. Copyright 2008 Wiley-Liss, Inc.

The Belle II VXD production database

Energy Technology Data Exchange (ETDEWEB)

Valentan, Manfred; Ritter, Martin [Max-Planck-Institut fuer Physik, Muenchen (Germany); Wuerkner, Benedikt; Leitl, Bernhard [Institut fuer Hochenergiephysik, Wien (Austria); Pilo, Federico [Istituto Nazionale di Fisica Nucleare, Pisa (Italy); Collaboration: Belle II-Collaboration

2015-07-01

The construction and commissioning of the Belle II Vertex Detector (VXD) is a huge endeavor involving a large number of valuable components. Both subsystems PXD (Pixel Detector) and SVD (Silicon Vertex Detector) deploy a large number of sensors, readout electronic parts and mechanical elements. These items are scattered around the world at many institutes, where they are built, measured and assembled. One has to keep track of measurement configurations and results, know at any time the location of the sensors, their processing state, quality, where they end up in an assembly, and who is responsible. These requirements call for a flexible and extensive database which is able to reflect the processes in the laboratories and the logistics between the institutes. This talk introduces the database requirements of a physics experiment using the PXD construction workflow as a showcase, and presents an overview of the database ''HephyDb'', which is used by the groups constructing the Belle II VXD.

National Benthic Infaunal Database (NBID)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The NBID is a quantitative database on abundances of individual benthic species by sample and study region, along with other synoptically measured environmental...

Database Description - RMG | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available ase Description General information of database Database name RMG Alternative name ...raki 305-8602, Japan National Institute of Agrobiological Sciences E-mail : Database... classification Nucleotide Sequence Databases Organism Taxonomy Name: Oryza sativa Japonica Group Taxonomy ID: 39947 Database...rnal: Mol Genet Genomics (2002) 268: 434–445 External Links: Original website information Database...available URL of Web services - Need for user registration Not available About This Database Database Descri

Relational databases

CERN Document Server

Bell, D A

1986-01-01

Relational Databases explores the major advances in relational databases and provides a balanced analysis of the state of the art in relational databases. Topics covered include capture and analysis of data placement requirements; distributed relational database systems; data dependency manipulation in database schemata; and relational database support for computer graphics and computer aided design. This book is divided into three sections and begins with an overview of the theory and practice of distributed systems, using the example of INGRES from Relational Technology as illustration. The

Database Description - DGBY | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available base Description General information of database Database name DGBY Alternative name Database...EL: +81-29-838-8066 E-mail: Database classification Microarray Data and other Gene Expression Databases Orga...nism Taxonomy Name: Saccharomyces cerevisiae Taxonomy ID: 4932 Database descripti...-called phenomics). We uploaded these data on this website which is designated DGBY(Database for Gene expres...ma J, Ando A, Takagi H. Journal: Yeast. 2008 Mar;25(3):179-90. External Links: Original website information Database

Database Description - KOME | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available base Description General information of database Database name KOME Alternative nam... Sciences Plant Genome Research Unit Shoshi Kikuchi E-mail : Database classification Plant databases - Rice ...Organism Taxonomy Name: Oryza sativa Taxonomy ID: 4530 Database description Information about approximately ...Hayashizaki Y, Kikuchi S. Journal: PLoS One. 2007 Nov 28; 2(11):e1235. External Links: Original website information Database...OS) Rice mutant panel database (Tos17) A Database of Plant Cis-acting Regulatory

Statistical Measures Alone Cannot Determine Which Database (BNI, CINAHL, MEDLINE, or EMBASE Is the Most Useful for Searching Undergraduate Nursing Topics. A Review of: Stokes, P., Foster, A., & Urquhart, C. (2009. Beyond relevance and recall: Testing new user-centred measures of database performance. Health Information and Libraries Journal, 26(3, 220-231.

Directory of Open Access Journals (Sweden)

Giovanna Badia

2011-03-01

database for a search topic, which was calculated as a percentage of the total number of unique results found in all four database searches;• availability (the number of relevant full text articles obtained from the database search results, which was calculated as a percentage of the total number of relevant results found in the database;• retrievability (the number of relevant full text articles obtained from the database search results, which was calculated as a percentage of the total number of relevant full text articles found from all four database searches;• effectiveness (the probable odds that a database will obtain relevant search results;• efficiency (the probable odds that a database will obtain both unique and relevant search results; and• accessibility (the probable odds that the full text of the relevant references obtained from the database search are available electronically or in print via the user’s library.Students decided whether the search results were relevant to their topic by using a “yes/no” scale. Only record titles were used to make relevancy judgments.Main Results – Friedman’s Test and odds ratios were used to compare the performance of BNI, CINAHL, MEDLINE, and EMBASE when searching for information about nursing topics.These two statistical measures demonstrated the following:• BNI had the best average score for the precision, availability, effectiveness, and accessibility of search results;• CINAHL scored the highest for the novelty, retrievability, and efficiency of results, and ranked second place for all the other criteria;• MEDLINE excelled in the areas of recall and originality, and ranked second place for novelty and retrievability; and• EMBASE did not obtain the highest, or second highest score, for any of the criteria.Conclusion – According to the authors, these results suggest that none of the databases studied can be considered the most useful for searching undergraduate nursing topics. CINAHL and

Stackfile Database

Science.gov (United States)

deVarvalho, Robert; Desai, Shailen D.; Haines, Bruce J.; Kruizinga, Gerhard L.; Gilmer, Christopher

2013-01-01

This software provides storage retrieval and analysis functionality for managing satellite altimetry data. It improves the efficiency and analysis capabilities of existing database software with improved flexibility and documentation. It offers flexibility in the type of data that can be stored. There is efficient retrieval either across the spatial domain or the time domain. Built-in analysis tools are provided for frequently performed altimetry tasks. This software package is used for storing and manipulating satellite measurement data. It was developed with a focus on handling the requirements of repeat-track altimetry missions such as Topex and Jason. It was, however, designed to work with a wide variety of satellite measurement data [e.g., Gravity Recovery And Climate Experiment -- GRACE). The software consists of several command-line tools for importing, retrieving, and analyzing satellite measurement data.

Impact of one's own mobile phone in stand-by mode on personal radiofrequency electromagnetic field exposure.

Science.gov (United States)

Urbinello, Damiano; Röösli, Martin

2013-01-01

When moving around, mobile phones in stand-by mode periodically send data about their positions. The aim of this paper is to evaluate how personal radiofrequency electromagnetic field (RF-EMF) measurements are affected by such location updates. Exposure from a mobile phone handset (uplink) was measured during commuting by using a randomized cross-over study with three different scenarios: disabled mobile phone (reference), an activated dual-band phone and a quad-band phone. In the reference scenario, uplink exposure was highest during train rides (1.19 mW/m(2)) and lowest during car rides in rural areas (0.001 mW/m(2)). In public transports, the impact of one's own mobile phone on personal RF-EMF measurements was not observable because of high background uplink radiation from other people's mobile phone. In a car, uplink exposure with an activated phone was orders of magnitude higher compared with the reference scenario. This study demonstrates that personal RF-EMF exposure is affected by one's own mobile phone in stand-by mode because of its regular location update. Further dosimetric studies should quantify the contribution of location updates to the total RF-EMF exposure in order to clarify whether the duration of mobile phone use, the most common exposure surrogate in the epidemiological RF-EMF research, is actually an adequate exposure proxy.

Novel Downhole Electromagnetic Flowmeter for Oil-Water Two-Phase Flow in High-Water-Cut Oil-Producing Wells.

Science.gov (United States)

Wang, Yanjun; Li, Haoyu; Liu, Xingbin; Zhang, Yuhui; Xie, Ronghua; Huang, Chunhui; Hu, Jinhai; Deng, Gang

2016-10-14

First, the measuring principle, the weight function, and the magnetic field of the novel downhole inserted electromagnetic flowmeter (EMF) are described. Second, the basic design of the EMF is described. Third, the dynamic experiments of two EMFs in oil-water two-phase flow are carried out. The experimental errors are analyzed in detail. The experimental results show that the maximum absolute value of the full-scale errors is better than 5%, the total flowrate is 5-60 m³/d, and the water-cut is higher than 60%. The maximum absolute value of the full-scale errors is better than 7%, the total flowrate is 2-60 m³/d, and the water-cut is higher than 70%. Finally, onsite experiments in high-water-cut oil-producing wells are conducted, and the possible reasons for the errors in the onsite experiments are analyzed. It is found that the EMF can provide an effective technology for measuring downhole oil-water two-phase flow.

Novel Downhole Electromagnetic Flowmeter for Oil-Water Two-Phase Flow in High-Water-Cut Oil-Producing Wells

Directory of Open Access Journals (Sweden)

Yanjun Wang

2016-10-01

Full Text Available First, the measuring principle, the weight function, and the magnetic field of the novel downhole inserted electromagnetic flowmeter (EMF are described. Second, the basic design of the EMF is described. Third, the dynamic experiments of two EMFs in oil-water two-phase flow are carried out. The experimental errors are analyzed in detail. The experimental results show that the maximum absolute value of the full-scale errors is better than 5%, the total flowrate is 5–60 m3/d, and the water-cut is higher than 60%. The maximum absolute value of the full-scale errors is better than 7%, the total flowrate is 2–60 m3/d, and the water-cut is higher than 70%. Finally, onsite experiments in high-water-cut oil-producing wells are conducted, and the possible reasons for the errors in the onsite experiments are analyzed. It is found that the EMF can provide an effective technology for measuring downhole oil-water two-phase flow.

Comparative performance measures of relational and object-oriented databases using High Energy Physics data

International Nuclear Information System (INIS)

Marstaller, J.

1993-12-01

The major experiments at the SSC are expected to produce up to 1 Petabyte of data per year. The use of database techniques can significantly reduce the time it takes to access data. The goal of this project was to test which underlying data model, the relational or the object-oriented, would be better suited for archival and accessing high energy data. We describe the relational and the object-oriented data model and their implementation in commercial database management systems. To determine scalability we tested both implementations for 10-MB and 100-MB databases using storage and timing criteria

Description of geological data in SKBs database GEOTAB

International Nuclear Information System (INIS)

Sehlstedt, S.; Stark, T.

1991-01-01

Since 1977 the Swedish Nuclear Fuel and Waste Management Co, SKB, has been performing a research and development programme for final disposal of spent nuclear fuel. The purpose of the programme is to acquire knowledge and data of radioactive waste. Measurement for the characterisation of geological, geophysical, hydrogeological and hydrochemical conditions are performed in specific site investigations as well as for geoscientific projects. Large data volumes have been produced since the start of the programme, both raw data and results. During the years these data were stored in various formats by the different institutions and companies that performed the investigations. It was therefore decided that all data from the research and development programme should be gathered in a database. The database, called GEOTAB, is a relational database. The database comprises six main groups of data volumes. These are: Background information, geological data, geophysical data, hydrological and meteorological data, hydrochemical data, and tracer tests. This report deals with geological data and described the dataflow from the measurements at the sites to the result tables in the database. The geological investigations have been divided into three categories, and each category is stored separately in the database. They are: Surface fractures, core mapping, and chemical analyses. (authors)

Social Capital Database

DEFF Research Database (Denmark)

Paldam, Martin; Svendsen, Gert Tinggaard

2005-01-01

  This report has two purposes: The first purpose is to present our 4-page question­naire, which measures social capital. It is close to the main definitions of social capital and contains the most successful measures from the literature. Also it is easy to apply as discussed. The second purpose...... is to present the social capital database we have collected for 21 countries using the question­naire. We do this by comparing the level of social capital in the countries covered. That is, the report compares the marginals from the 21 surveys....

Databases

Directory of Open Access Journals (Sweden)

Nick Ryan

2004-01-01

Full Text Available Databases are deeply embedded in archaeology, underpinning and supporting many aspects of the subject. However, as well as providing a means for storing, retrieving and modifying data, databases themselves must be a result of a detailed analysis and design process. This article looks at this process, and shows how the characteristics of data models affect the process of database design and implementation. The impact of the Internet on the development of databases is examined, and the article concludes with a discussion of a range of issues associated with the recording and management of archaeological data.

Monitoring and measurement of oxygen concentrations in liquid sodium

International Nuclear Information System (INIS)

Smith, D.L.

1976-01-01

The measurement of oxygen concentrations in sodium at levels of interest for LMFBR applications is reviewed. Additional data are presented to support the validity of the vanadium-equilibration method as a reference for determination of oxygen concentrations in sodium at levels equal to or less than 15 ppM. Operating experience with electrochemical oxygen meters that have a thoria-yttria electrolyte and a Na--Na 2 O reference electrode is described. Meter lifetimes in excess of one year have generally been achieved for operating temperatures of 352 and 402 0 C, and fairly stable emfs have been observed for periods of several months. 7 fig, 21 references

A high-energy nuclear database proposal

International Nuclear Information System (INIS)

Brown, D.A.; Vogt, R.; UC Davis, CA

2006-01-01

We propose to develop a high-energy heavy-ion experimental database and make it accessible to the scientific community through an on-line interface. This database will be searchable and cross-indexed with relevant publications, including published detector descriptions. Since this database will be a community resource, it requires the high-energy nuclear physics community's financial and manpower support. This database should eventually contain all published data from the Bevalac, AGS and SPS to RHIC and LHC energies, proton-proton to nucleus-nucleus collisions as well as other relevant systems, and all measured observables. Such a database would have tremendous scientific payoff as it makes systematic studies easier and allows simpler benchmarking of theoretical models to a broad range of old and new experiments. Furthermore, there is a growing need for compilations of high-energy nuclear data for applications including stockpile stewardship, technology development for inertial confinement fusion and target and source development for upcoming facilities such as the Next Linear Collider. To enhance the utility of this database, we propose periodically performing evaluations of the data and summarizing the results in topical reviews. (author)

Spectroscopic databases - A tool for structure elucidation

Energy Technology Data Exchange (ETDEWEB)

Luksch, P [Fachinformationszentrum Karlsruhe, Gesellschaft fuer Wissenschaftlich-Technische Information mbH, Eggenstein-Leopoldshafen (Germany)

1990-05-01

Spectroscopic databases have developed to useful tools in the process of structure elucidation. Besides the conventional library searches, new intelligent programs have been added, that are able to predict structural features from measured spectra or to simulate for a given structure. The example of the C13NMR/IR database developed at BASF and available on STN is used to illustrate the present capabilities of online database. New developments in the field of spectrum simulation and methods for the prediction of complete structures from spectroscopic information are reviewed. (author). 10 refs, 5 figs.

UnoViS: the MedIT public unobtrusive vital signs database.

Science.gov (United States)

Wartzek, Tobias; Czaplik, Michael; Antink, Christoph Hoog; Eilebrecht, Benjamin; Walocha, Rafael; Leonhardt, Steffen

2015-01-01

While PhysioNet is a large database for standard clinical vital signs measurements, such a database does not exist for unobtrusively measured signals. This inhibits progress in the vital area of signal processing for unobtrusive medical monitoring as not everybody owns the specific measurement systems to acquire signals. Furthermore, if no common database exists, a comparison between different signal processing approaches is not possible. This gap will be closed by our UnoViS database. It contains different recordings in various scenarios ranging from a clinical study to measurements obtained while driving a car. Currently, 145 records with a total of 16.2 h of measurement data is available, which are provided as MATLAB files or in the PhysioNet WFDB file format. In its initial state, only (multichannel) capacitive ECG and unobtrusive PPG signals are, together with a reference ECG, included. All ECG signals contain annotations by a peak detector and by a medical expert. A dataset from a clinical study contains further clinical annotations. Additionally, supplementary functions are provided, which simplify the usage of the database and thus the development and evaluation of new algorithms. The development of urgently needed methods for very robust parameter extraction or robust signal fusion in view of frequent severe motion artifacts in unobtrusive monitoring is now possible with the database.

Fiscal 1998 research report. Construction model project of the human sensory database; 1998 nendo ningen kankaku database kochiku model jigyo seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This report summarizes the fiscal 1998 research result on construction of the human sensory database. The human sensory database for evaluating working environment was constructed on the basis of the measurement result on human sensory data (stress and fatigue) of 400 examinees at fields (transport field, control room and office) and in a laboratory. By using the newly developed standard measurement protocol for evaluating summer clothing (shirt, slacks and underwear), the database composed of the evaluation experiment results and the comparative experiment results on human physiological and sensory data of aged and young people was constructed. The database is featured by easy retrieval of various information concerned corresponding to requirements of tasks and use purposes. For evaluating the mass data with large time variation read corresponding to use purposes for every scene, the data detection support technique was adopted paying attention to physical and psychological variable phases, and mind and body events. A meaning of reaction and a hint for necessary measures are showed for every phase and event. (NEDO)

The Global Energy Balance Archive (GEBA) version 2017: a database for worldwide measured surface energy fluxes

Science.gov (United States)

Wild, Martin; Ohmura, Atsumu; Schär, Christoph; Müller, Guido; Folini, Doris; Schwarz, Matthias; Zyta Hakuba, Maria; Sanchez-Lorenzo, Arturo

2017-08-01

The Global Energy Balance Archive (GEBA) is a database for the central storage of the worldwide measured energy fluxes at the Earth's surface, maintained at ETH Zurich (Switzerland). This paper documents the status of the GEBA version 2017 dataset, presents the new web interface and user access, and reviews the scientific impact that GEBA data had in various applications. GEBA has continuously been expanded and updated and contains in its 2017 version around 500 000 monthly mean entries of various surface energy balance components measured at 2500 locations. The database contains observations from 15 surface energy flux components, with the most widely measured quantity available in GEBA being the shortwave radiation incident at the Earth's surface (global radiation). Many of the historic records extend over several decades. GEBA contains monthly data from a variety of sources, namely from the World Radiation Data Centre (WRDC) in St. Petersburg, from national weather services, from different research networks (BSRN, ARM, SURFRAD), from peer-reviewed publications, project and data reports, and from personal communications. Quality checks are applied to test for gross errors in the dataset. GEBA has played a key role in various research applications, such as in the quantification of the global energy balance, in the discussion of the anomalous atmospheric shortwave absorption, and in the detection of multi-decadal variations in global radiation, known as global dimming and brightening. GEBA is further extensively used for the evaluation of climate models and satellite-derived surface flux products. On a more applied level, GEBA provides the basis for engineering applications in the context of solar power generation, water management, agricultural production and tourism. GEBA is publicly accessible through the internet via http://www.geba.ethz.ch. Supplementary data are available at https://doi.org/10.1594/PANGAEA.873078.

Database Description - SSBD | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available base Description General information of database Database name SSBD Alternative nam...ss 2-2-3 Minatojima-minamimachi, Chuo-ku, Kobe 650-0047, Japan, RIKEN Quantitative Biology Center Shuichi Onami E-mail: Database... classification Other Molecular Biology Databases Database classification Dynamic databa...elegans Taxonomy ID: 6239 Taxonomy Name: Escherichia coli Taxonomy ID: 562 Database description Systems Scie...i Onami Journal: Bioinformatics/April, 2015/Volume 31, Issue 7 External Links: Original website information Database

Database Description - GETDB | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available abase Description General information of database Database name GETDB Alternative n...ame Gal4 Enhancer Trap Insertion Database DOI 10.18908/lsdba.nbdc00236-000 Creator Creator Name: Shigeo Haya... Chuo-ku, Kobe 650-0047 Tel: +81-78-306-3185 FAX: +81-78-306-3183 E-mail: Database classification Expression... Invertebrate genome database Organism Taxonomy Name: Drosophila melanogaster Taxonomy ID: 7227 Database des...riginal website information Database maintenance site Drosophila Genetic Resource

JICST Factual DatabaseJICST Chemical Substance Safety Regulation Database

Science.gov (United States)

Abe, Atsushi; Sohma, Tohru

JICST Chemical Substance Safety Regulation Database is based on the Database of Safety Laws for Chemical Compounds constructed by Japan Chemical Industry Ecology-Toxicology & Information Center (JETOC) sponsored by the Sience and Technology Agency in 1987. JICST has modified JETOC database system, added data and started the online service through JOlS-F (JICST Online Information Service-Factual database) in January 1990. JICST database comprises eighty-three laws and fourteen hundred compounds. The authors outline the database, data items, files and search commands. An example of online session is presented.

On the modelling of microsegregation in steels involving thermodynamic databases

International Nuclear Information System (INIS)

You, D; Bernhard, C; Michelic, S; Wieser, G; Presoly, P

2016-01-01

A microsegregation model involving thermodynamic database based on Ohnaka's model is proposed. In the model, the thermodynamic database is applied for equilibrium calculation. Multicomponent alloy effects on partition coefficients and equilibrium temperatures are accounted for. Microsegregation and partition coefficients calculated using different databases exhibit significant differences. The segregated concentrations predicted using the optimized database are in good agreement with the measured inter-dendritic concentrations. (paper)

Electromagnetic field pretreatment of Sinapis alba seeds improved cadmium phytoextraction.

Science.gov (United States)

Bulak, Piotr; Lata, Lesia; Plak, Andrzej; Wiącek, Dariusz; Strobel, Wacław; Walkiewicz, Anna; Pietruszewski, Stanisław; Bieganowski, Andrzej

2018-03-21

It was hypothesized that electromagnetic field (EMF) pretreatment of white mustard (Sinapis alba L.) seeds could increase the accumulation of non-essential, pollutant heavy metals such as cadmium (Cd) in shoots. Seeds of white mustard were treated with either 60 or 120 mT of alternating EMF (50 Hz) for 1 minute and then grown in a Petri dish in the presence of Cd, in comparison to the control (seeds grown without EMF pretreatment). Biomass production and content of calcium (Ca) and Cd in seedling shoots were measured. The Cd content in shoots from the EMF-treated seeds was higher in both variants than in the control (by 73% and 78%, respectively; p phytoextraction, but more research is needed.

Radiofrequency Electromagnetic Field Map of Timisoara

Science.gov (United States)

Stefu, N.; Solyom, I.; Arama, A.

2015-12-01

There are many electromagnetic field (EMF) sources nowadays acting simultaneously, especially in urban areas, making the theoretical estimation of electromagnetic power at ground level very difficult. This paper reports on EMF maps built with measurements collected in Timisoara, at various radiofrequencies. A grid of 15×15 squares was built (approximate resolution 400m x 400m) and measurements of the average and maximum values of the electric field E, magnetic field H and total power density S at 0.9, 1.8 and 2.4 GHz were collected in every node of the grid. Positions of the nodes in terms of latitude and longitude were also collected. Maps were built presenting the spatial distribution of the measured quantities over Timisoara. Potential influences of EMF on public health are discussed.

Database for environmental monitoring at nuclear facilities

International Nuclear Information System (INIS)

Raceanu, M.; Varlam, C.; Enache, A.; Faurescu, I.

2006-01-01

To ensure that an assessment could be made of the impact of nuclear facilities on the local environment, a program of environmental monitoring must be established well in advance of nuclear facilities operation. Enormous amount of data must be stored and correlated starting with: location, meteorology, type sample characterization from water to different kind of food, radioactivity measurement and isotopic measurement (e.g. for C-14 determination, C-13 isotopic correction it is a must). Data modelling is a well known mechanism describing data structures at a high level of abstraction. Such models are often used to automatically create database structures, and to generate code structures used to access databases. This has the disadvantage of losing data constraints that might be specified in data models for data checking. Embodiment of the system of the present application includes a computer-readable memory for storing a definitional data table for defining variable symbols representing respective measurable physical phenomena. The definitional data table uniquely defines the variable symbols by relating them to respective data domains for the respective phenomena represented by the symbols. Well established rules of how the data should be stored and accessed, are given in the Relational Database Theory. The theory comprise of guidelines such as the avoidance of duplicating data using technique call normalization and how to identify the unique identifier for a database record. (author)

Mt Pamola, the Electromagnetic Field, EMF, Thunderbird, Mothman and Environmental Monitoring Signals Via the Southern Constellation Phoenix As Detectable In Potato Cave, Acton, MA.

Science.gov (United States)

Pecora, Andrea S.; Pawa Matagamon, Sagamo

2004-03-01

Just below the peak of Mt Pamola in ME, at the juncture with the Knife Edge, downwardly arcing segments of Earths EMF, are manifested by a faint lotus-blossom-blue, neon-like glow at 3 pm some sunny afternoons. Similarly hued glows, and horizontal but variable-arced segmented trajectories, are somewhat periodically detectable under certain conditions in chambers at Acton, MA. These phenomena curiously have the filled-in profile that precisely matches the outline of the southern constellation Phoenix, which is never visible above the nighttime horizon locally. The stick-figure representation of the constellation Canis Major can also be detected in a chamber at Americas Stonehenge, two hours before it has arisen, at certain times. The sequence of phenomena visible at Acton correctly correlates with eclipses and other alignments of our solar system. Phoenix, a.k.a. Thunderbird and Mothman, is detectable elsewhere in MA.

EMF Rapid Program Engineering Projects, Project 1, Development of Recommendations for Guidelines for Field Source Measurement

Energy Technology Data Exchange (ETDEWEB)

Electric Research and Management, Inc.

1997-03-11

The goal of this project is to develop a protocol for measuring the electric and magnetic fields around sources. Data from these measurements may help direct future biological effects research by better defining the complexity of magnetic and electric fields to which humanity is exposed, as well asprovide the basis for rigorous field exposure analysis and risk assessment once the relationship between field exposure and biological response. is better understood. The data base also should have sufficient spatial and temporal characteristics to guide electric and magnetic field management. The goal of Task A is to construct a set of characteristics that would be ideal to have for guiding and interpreting biological studies and for focusing any future effort at field management. This ideal set will then be quantified and reduced according to the availability (or possible development of) instrumentation to measure the desired characteristics. Factors that also will be used to define pragmatic data sets will be the cost of collecting the data, the cost of developing an adequate data base, and the needed precision in measuring specific characteristics. A field, electric or magnetic, will always be ,some function of time and space. The first step in this section of the protocol development will be to determine what span of time and what portion of space are required to quantify the electric and magnetic fields around sources such as appliances and electrical apparatus. Constraints on time will be set by examining measurement limitations and biological data requirements.

Database Description - KAIKOcDNA | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available List Contact us KAIKOcDNA Database Description General information of database Database name KAIKOcDNA Alter...National Institute of Agrobiological Sciences Akiya Jouraku E-mail : Database cla...ssification Nucleotide Sequence Databases Organism Taxonomy Name: Bombyx mori Taxonomy ID: 7091 Database des...rnal: G3 (Bethesda) / 2013, Sep / vol.9 External Links: Original website information Database maintenance si...available URL of Web services - Need for user registration Not available About This Database Database

Download - Trypanosomes Database | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available List Contact us Trypanosomes Database Download First of all, please read the license of this database. Data ...1.4 KB) Simple search and download Downlaod via FTP FTP server is sometimes jammed. If it is, access [here]. About This Database Data...base Description Download License Update History of This Database Site Policy | Contact Us Download - Trypanosomes Database | LSDB Archive ...

License - Arabidopsis Phenome Database | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available List Contact us Arabidopsis Phenome Database License License to Use This Database Last updated : 2017/02/27 You may use this database...cense specifies the license terms regarding the use of this database and the requirements you must follow in using this database.... The license for this database is specified in the Creative ...Commons Attribution-Share Alike 4.0 International . If you use data from this database, please be sure attribute this database...ative Commons Attribution-Share Alike 4.0 International is found here . With regard to this database, you ar

A database for superconducting cavities for the TESLA Test Facility

International Nuclear Information System (INIS)

Gall, P.D.; Goessel, A.; Gubarev, V.; Iversen, J.

2006-01-01

We look back on 10 years experience using a database for superconducting cavities for the TESLA Test Facility (TTF). The database was developed to collect data of every preparation step and measurement in order to optimize cavity production and preparation techniques to meet the ambitious goal of high accelerating gradients at high quality factors. Data from 110 superconducting 9-cell cavities, 50 single cell cavities, several 2- to 7-cell cavities and about 60 RF couplers were collected in the database. In addition, company measurements on sub-assemblies and parts forming the next 30 9-cell cavities were stored, thus establishing the database as part of a quality management system. This database is dynamically accessible via an extensive graphical web-interface based on ORACLE products, which enables the users to select and analyse the collected data easily from anywhere

Electromagnetic treatment to old Alzheimer's mice reverses β-amyloid deposition, modifies cerebral blood flow, and provides selected cognitive benefit.

Directory of Open Access Journals (Sweden)

Gary W Arendash

Full Text Available Few studies have investigated physiologic and cognitive effects of "long-term" electromagnetic field (EMF exposure in humans or animals. Our recent studies have provided initial insight into the long-term impact of adulthood EMF exposure (GSM, pulsed/modulated, 918 MHz, 0.25-1.05 W/kg by showing 6+ months of daily EMF treatment protects against or reverses cognitive impairment in Alzheimer's transgenic (Tg mice, while even having cognitive benefit to normal mice. Mechanistically, EMF-induced cognitive benefits involve suppression of brain β-amyloid (Aβ aggregation/deposition in Tg mice and brain mitochondrial enhancement in both Tg and normal mice. The present study extends this work by showing that daily EMF treatment given to very old (21-27 month Tg mice over a 2-month period reverses their very advanced brain Aβ aggregation/deposition. These very old Tg mice and their normal littermates together showed an increase in general memory function in the Y-maze task, although not in more complex tasks. Measurement of both body and brain temperature at intervals during the 2-month EMF treatment, as well as in a separate group of Tg mice during a 12-day treatment period, revealed no appreciable increases in brain temperature (and no/slight increases in body temperature during EMF "ON" periods. Thus, the neuropathologic/cognitive benefits of EMF treatment occur without brain hyperthermia. Finally, regional cerebral blood flow in cerebral cortex was determined to be reduced in both Tg and normal mice after 2 months of EMF treatment, most probably through cerebrovascular constriction induced by freed/disaggregated Aβ (Tg mice and slight body hyperthermia during "ON" periods. These results demonstrate that long-term EMF treatment can provide general cognitive benefit to very old Alzheimer's Tg mice and normal mice, as well as reversal of advanced Aβ neuropathology in Tg mice without brain heating. Results further underscore the potential for EMF

Database Description - AcEST | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available abase Description General information of database Database name AcEST Alternative n...hi, Tokyo-to 192-0397 Tel: +81-42-677-1111(ext.3654) E-mail: Database classificat...eneris Taxonomy ID: 13818 Database description This is a database of EST sequences of Adiantum capillus-vene...(3): 223-227. External Links: Original website information Database maintenance site Plant Environmental Res...base Database Description Download License Update History of This Database Site Policy | Contact Us Database Description - AcEST | LSDB Archive ...

Analysis of the evidence-practice gap to facilitate proper medical care for the elderly: investigation, using databases, of utilization measures for National Database of Health Insurance Claims and Specific Health Checkups of Japan (NDB).

Science.gov (United States)

Nakayama, Takeo; Imanaka, Yuichi; Okuno, Yasushi; Kato, Genta; Kuroda, Tomohiro; Goto, Rei; Tanaka, Shiro; Tamura, Hiroshi; Fukuhara, Shunichi; Fukuma, Shingo; Muto, Manabu; Yanagita, Motoko; Yamamoto, Yosuke

2017-06-06

As Japan becomes a super-aging society, presentation of the best ways to provide medical care for the elderly, and the direction of that care, are important national issues. Elderly people have multi-morbidity with numerous medical conditions and use many medical resources for complex treatment patterns. This increases the likelihood of inappropriate medical practices and an evidence-practice gap. The present study aimed to: derive findings that are applicable to policy from an elucidation of the actual state of medical care for the elderly; establish a foundation for the utilization of National Database of Health Insurance Claims and Specific Health Checkups of Japan (NDB), and present measures for the utilization of existing databases in parallel with NDB validation.Cross-sectional and retrospective cohort studies were conducted using the NDB built by the Ministry of Health, Labor and Welfare of Japan, private health insurance claims databases, and the Kyoto University Hospital database (including related hospitals). Medical practices (drug prescription, interventional procedures, testing) related to four issues-potential inappropriate medication, cancer therapy, chronic kidney disease treatment, and end-of-life care-will be described. The relationships between these issues and clinical outcomes (death, initiation of dialysis and other adverse events) will be evaluated, if possible.

License - SKIP Stemcell Database | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available List Contact us SKIP Stemcell Database License License to Use This Database Last updated : 2017/03/13 You may use this database...specifies the license terms regarding the use of this database and the requirements you must follow in using this database.... The license for this database is specified in the Creative Common...s Attribution-Share Alike 4.0 International . If you use data from this database, please be sure attribute this database...al ... . The summary of the Creative Commons Attribution-Share Alike 4.0 International is found here . With regard to this database

Effect of extremely low frequency electromagnetic fields on growth rate and morphology of bacteria.

Science.gov (United States)

Inhan-Garip, Ayse; Aksu, Burak; Akan, Zafer; Akakin, Dilek; Ozaydin, A Nilufer; San, Tangul

2011-12-01

To determine the effect of extremely low frequency (bacteria and to determine any morphological changes that might have been caused by ELF-EMF. Six bacterial strains, three Gram-negative and three Gram-positive were subjected to 50 Hz, 0.5 mT ELF-EMF for 6 h. To determine growth rate after ELF-EMF application, bacteria exposed to ELF-EMF for 3 h were collected, transferred to fresh medium and cultured without field application for another 4 h. Growth-rate was determined by optical density (OD) measurements made every hour. Morphological changes were determined with Transmission electron microscopy (TEM) for two gram-negative and two gram-positive strains collected after 3 h of field application. A decrease in growth rate with respect to control samples was observed for all strains during ELF-EMF application. The decrease in growth-rate continued when exposed bacteria were cultured without field application. Significant ultrastructural changes were observed in all bacterial strains, which were seen to resemble the alterations caused by cationic peptides. This study shows that ELF-EMF induces a decrease in growth rate and morphological changes for both Gram-negative and Gram-positive bacteria.

Regulation requirements for the protection of workers against electromagnetic fields occurring in the work environment

International Nuclear Information System (INIS)

Aniolczyk, H.; Zmyslony, M.

2006-01-01

In Poland, electromagnetic fields (EMF), one of potentially hazardous physical factors occurring in the work environment, are subjected to compulsory surveillance. In 2001, the Directive issued by the Minister of Labor and Social Policy substantially changed the approach towards the protection of workers against EMF. The Directive regulates the whole range of EMF frequencies and electromagnetic radiation, namely from 0 Hz to 300 GHz, which means the possibility of assessing workers EMF exposure, determined by exposure index, along with the hygiene assessment of EMF sources, defined by protection zones. In 2003 - 2005, a number of amended executive and supplementary regulations were issued. However, it should be emphasized that in the process of their elaboration, striving after perfection, numerous incoherent and ambiguous provisions were adopted, which finally created difficulties in the interpretation of individual regulations. This is also linked with doubts and discussions on their practical application by services responsible for control, measurements and monitoring of working conditions under the exposure to EMF. In this work an attempt was made to clarify all issues and arrange them according to the faced problems. The authors also present proposals how to solve all these problems. (author)

KALIMER database development

Energy Technology Data Exchange (ETDEWEB)

Jeong, Kwan Seong; Lee, Yong Bum; Jeong, Hae Yong; Ha, Kwi Seok

2003-03-01

KALIMER database is an advanced database to utilize the integration management for liquid metal reactor design technology development using Web applications. KALIMER design database is composed of results database, Inter-Office Communication (IOC), 3D CAD database, and reserved documents database. Results database is a research results database during all phase for liquid metal reactor design technology development of mid-term and long-term nuclear R and D. IOC is a linkage control system inter sub project to share and integrate the research results for KALIMER. 3D CAD database is a schematic overview for KALIMER design structure. And reserved documents database is developed to manage several documents and reports since project accomplishment.

KALIMER database development

International Nuclear Information System (INIS)

Jeong, Kwan Seong; Lee, Yong Bum; Jeong, Hae Yong; Ha, Kwi Seok

2003-03-01

KALIMER database is an advanced database to utilize the integration management for liquid metal reactor design technology development using Web applications. KALIMER design database is composed of results database, Inter-Office Communication (IOC), 3D CAD database, and reserved documents database. Results database is a research results database during all phase for liquid metal reactor design technology development of mid-term and long-term nuclear R and D. IOC is a linkage control system inter sub project to share and integrate the research results for KALIMER. 3D CAD database is a schematic overview for KALIMER design structure. And reserved documents database is developed to manage several documents and reports since project accomplishment

Database Description - RPSD | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available base Description General information of database Database name RPSD Alternative nam...e Rice Protein Structure Database DOI 10.18908/lsdba.nbdc00749-000 Creator Creator Name: Toshimasa Yamazaki ... Ibaraki 305-8602, Japan National Institute of Agrobiological Sciences Toshimasa Yamazaki E-mail : Databas...e classification Structure Databases - Protein structure Organism Taxonomy Name: Or...or name(s): Journal: External Links: Original website information Database maintenance site National Institu

Thermodynamics of Enzyme-Catalyzed Reactions Database

Science.gov (United States)

SRD 74 Thermodynamics of Enzyme-Catalyzed Reactions Database (Web, free access)   The Thermodynamics of Enzyme-Catalyzed Reactions Database contains thermodynamic data on enzyme-catalyzed reactions that have been recently published in the Journal of Physical and Chemical Reference Data (JPCRD). For each reaction the following information is provided: the reference for the data, the reaction studied, the name of the enzyme used and its Enzyme Commission number, the method of measurement, the data and an evaluation thereof.

Database Description - FANTOM5 | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available List Contact us FANTOM5 Database Description General information of database Database name FANTOM5 Alternati...me: Rattus norvegicus Taxonomy ID: 10116 Taxonomy Name: Macaca mulatta Taxonomy ID: 9544 Database descriptio...l Links: Original website information Database maintenance site RIKEN Center for Life Science Technologies, ...ilable Web services Not available URL of Web services - Need for user registration Not available About This Database Database... Description Download License Update History of This Database Site Policy | Contact Us Database Description - FANTOM5 | LSDB Archive ...

NoSQL databases

OpenAIRE

Mrozek, Jakub

2012-01-01

This thesis deals with database systems referred to as NoSQL databases. In the second chapter, I explain basic terms and the theory of database systems. A short explanation is dedicated to database systems based on the relational data model and the SQL standardized query language. Chapter Three explains the concept and history of the NoSQL databases, and also presents database models, major features and the use of NoSQL databases in comparison with traditional database systems. In the fourth ...

Description of geophysical data in the SKB database GEOTAB

International Nuclear Information System (INIS)

Sehlstedt, S.

1988-02-01

For the storage of different types of data collected by SKB a database called Geotab has been created. The following data are stored in the database: Background data, geological data, geophysical data, hydrogeological data, hydrochemical data. This report describes the data flow for different types of geophysical measurements. The descriptions start with measurements and end with the storage of data in Geotab. Each process and the resulting data volume is presented separately. The geophysical measurements have been divided into the following subjects: Geophysical ground surface measurements, profile measurements; geophysical ground surface measurements, grid net measurements; geophysical borehole logging; petrophysical measurements. Each group of measurements is described in an individual chapter. In each chapter several measuring techniques are described and each method has a data table and a flyleaf table in Geotab. (orig.)

Proposal for a High Energy Nuclear Database

International Nuclear Information System (INIS)

Brown, David A.; Vogt, Ramona

2005-01-01

We propose to develop a high-energy heavy-ion experimental database and make it accessible to the scientific community through an on-line interface. This database will be searchable and cross-indexed with relevant publications, including published detector descriptions. Since this database will be a community resource, it requires the high-energy nuclear physics community's financial and manpower support. This database should eventually contain all published data from Bevalac and AGS to RHIC to CERN-LHC energies, proton-proton to nucleus-nucleus collisions as well as other relevant systems, and all measured observables. Such a database would have tremendous scientific payoff as it makes systematic studies easier and allows simpler benchmarking of theoretical models to a broad range of old and new experiments. Furthermore, there is a growing need for compilations of high-energy nuclear data for applications including stockpile stewardship, technology development for inertial confinement fusion and target and source development for upcoming facilities such as the Next Linear Collider. To enhance the utility of this database, we propose periodically performing evaluations of the data and summarizing the results in topical reviews

Bluetooth wireless database for scoliosis clinics.

Science.gov (United States)

Lou, E; Fedorak, M V; Hill, D L; Raso, J V; Moreau, M J; Mahood, J K

2003-05-01

A database system with Bluetooth wireless connectivity has been developed so that scoliosis clinics can be run more efficiently and data can be mined for research studies without significant increases in equipment cost. The wireless database system consists of a Bluetooth-enabled laptop or PC and a Bluetooth-enabled handheld personal data assistant (PDA). Each patient has a profile in the database, which has all of his or her clinical history. Immediately prior to the examination, the orthopaedic surgeon selects a patient's profile from the database and uploads that data to the PDA over a Bluetooth wireless connection. The surgeon can view the entire clinical history of the patient while in the examination room and, at the same time, enter in any new measurements and comments from the current examination. After seeing the patient, the surgeon synchronises the newly entered information with the database wirelessly and prints a record for the chart. This combination of the database and the PDA both improves efficiency and accuracy and can save significant time, as there is less duplication of work, and no dictation is required. The equipment required to implement this solution is a Bluetooth-enabled PDA and a Bluetooth wireless transceiver for the PC or laptop.

Removal of Escherichia coli via low frequency electromagnetic field in riverbank filtration system.

Science.gov (United States)

Selamat, Rossitah; Abustan, Ismail; Rizal Arshad, Mohd; Mokhtar Kamal, Nurul Hana

2018-04-01

The removal of Escherichia coli (E. coli) via low frequency of electromagnetic field (LF-EMF) with different magnetic field was studied. LF-EMF is known as a high magnetic susceptibility method, which could affect E. coli growth without the usage of chemicals. The aim of this study was to investigate the removal of E. coli by using LF-EMF in water abstraction for the riverbank filtration (RBF) application. The effect of LF-EMF with the intensity of 2 to 10mT and 50Hz on coiled column of 1mm copper wire at 1 to 6 hours was assessed. The removal of E. coli after exposing to LF-EMF on the column model was measured using most probable number (MPN/100mL) and colonies forming unit (CFU/100mL) methods. Water flows into the column were varied up to 6 hours and with flowrate of 100 mL/min. Experimental results demonstrate that 100% of E. coli was removed at 8mT after 6 hours exposure. The magnetic field at 10mT removed 100% of E. coli after 4 hours exposure. The results obtained in this study proved that the LF-EMF was efficient in E. coli removal from RBF system. These finding indicated that the LF-EMF intensities and time of exposure can affect the removal of E. coli.

Benign Effect of Extremely Low-Frequency Electromagnetic Field on Brain Plasticity Assessed by Nitric Oxide Metabolism during Poststroke Rehabilitation

Directory of Open Access Journals (Sweden)

Natalia Cichoń

2017-01-01

Full Text Available Nitric oxide (NO is one of the most important signal molecules, involved in both physiological and pathological processes. As a neurotransmitter in the central nervous system, NO regulates cerebral blood flow, neurogenesis, and synaptic plasticity. The aim of our study was to investigate the effect of the extremely low-frequency electromagnetic field (ELF-EMF on generation and metabolism of NO, as a neurotransmitter, in the rehabilitation of poststroke patients. Forty-eight patients were divided into two groups: ELF-EMF and non-ELF-EMF. Both groups underwent the same 4-week rehabilitation program. Additionally, the ELF-EMF group was exposed to an extremely low-frequency electromagnetic field of 40 Hz, 7 mT, for 15 min/day. Levels of 3-nitrotyrosine, nitrate/nitrite, and TNFα in plasma samples were measured, and NOS2 expression was determined in whole blood samples. Functional status was evaluated before and after a series of treatments, using the Activity Daily Living, Geriatric Depression Scale, and Mini-Mental State Examination. We observed that application of ELF-EMF significantly increased 3-nitrotyrosine and nitrate/nitrite levels, while expression of NOS2 was insignificantly decreased in both groups. The results also show that ELF-EMF treatments improved functional and mental status. We conclude that ELF-EMF therapy is capable of promoting recovery in poststroke patients.

Characterisation of exposure to non-ionising electromagnetic fields in the Spanish INMA birth cohort: study protocol.

Science.gov (United States)

Gallastegi, Mara; Guxens, Mònica; Jiménez-Zabala, Ana; Calvente, Irene; Fernández, Marta; Birks, Laura; Struchen, Benjamin; Vrijheid, Martine; Estarlich, Marisa; Fernández, Mariana F; Torrent, Maties; Ballester, Ferrán; Aurrekoetxea, Juan J; Ibarluzea, Jesús; Guerra, David; González, Julián; Röösli, Martin; Santa-Marina, Loreto

2016-02-18

Analysis of the association between exposure to electromagnetic fields of non-ionising radiation (EMF-NIR) and health in children and adolescents is hindered by the limited availability of data, mainly due to the difficulties on the exposure assessment. This study protocol describes the methodologies used for characterising exposure of children to EMF-NIR in the INMA (INfancia y Medio Ambiente- Environment and Childhood) Project, a prospective cohort study. Indirect (proximity to emission sources, questionnaires on sources use and geospatial propagation models) and direct methods (spot and fixed longer-term measurements and personal measurements) were conducted in order to assess exposure levels of study participants aged between 7 and 18 years old. The methodology used varies depending on the frequency of the EMF-NIR and the environment (homes, schools and parks). Questionnaires assessed the use of sources contributing both to Extremely Low Frequency (ELF) and Radiofrequency (RF) exposure levels. Geospatial propagation models (NISMap) are implemented and validated for environmental outdoor sources of RFs using spot measurements. Spot and fixed longer-term ELF and RF measurements were done in the environments where children spend most of the time. Moreover, personal measurements were taken in order to assess individual exposure to RF. The exposure data are used to explore their relationships with proximity and/or use of EMF-NIR sources. Characterisation of the EMF-NIR exposure by this combination of methods is intended to overcome problems encountered in other research. The assessment of exposure of INMA cohort children and adolescents living in different regions of Spain to the full frequency range of EMF-NIR extends the characterisation of environmental exposures in this cohort. Together with other data obtained in the project, on socioeconomic and family characteristics and development of the children and adolescents, this will enable to evaluate the complex

Characterisation of exposure to non-ionising electromagnetic fields in the Spanish INMA birth cohort: study protocol

Directory of Open Access Journals (Sweden)

Mara Gallastegi

2016-02-01

Full Text Available Abstract Background Analysis of the association between exposure to electromagnetic fields of non-ionising radiation (EMF-NIR and health in children and adolescents is hindered by the limited availability of data, mainly due to the difficulties on the exposure assessment. This study protocol describes the methodologies used for characterising exposure of children to EMF-NIR in the INMA (INfancia y Medio Ambiente- Environment and Childhood Project, a prospective cohort study. Methods/Design Indirect (proximity to emission sources, questionnaires on sources use and geospatial propagation models and direct methods (spot and fixed longer-term measurements and personal measurements were conducted in order to assess exposure levels of study participants aged between 7 and 18 years old. The methodology used varies depending on the frequency of the EMF-NIR and the environment (homes, schools and parks. Questionnaires assessed the use of sources contributing both to Extremely Low Frequency (ELF and Radiofrequency (RF exposure levels. Geospatial propagation models (NISMap are implemented and validated for environmental outdoor sources of RFs using spot measurements. Spot and fixed longer-term ELF and RF measurements were done in the environments where children spend most of the time. Moreover, personal measurements were taken in order to assess individual exposure to RF. The exposure data are used to explore their relationships with proximity and/or use of EMF-NIR sources. Discussion Characterisation of the EMF-NIR exposure by this combination of methods is intended to overcome problems encountered in other research. The assessment of exposure of INMA cohort children and adolescents living in different regions of Spain to the full frequency range of EMF-NIR extends the characterisation of environmental exposures in this cohort. Together with other data obtained in the project, on socioeconomic and family characteristics and development of the children

Study of extremely low frequency electromagnetic fields in infant incubators.

Science.gov (United States)

Cermáková, Eleonora

2003-01-01

The aim of the work was to present the results of measurements of extremely low frequency electromagnetic fields (ELF EMF), namely the magnetic flux density, inside infant incubators, and to compare these results with the data published by other authors who point out to a possible association between leukemia or other diseases observed in newborns kept in incubators after the birth and the ELF EMF exposure in the incubator. The measured magnetic flux densities were compared with the reference values for this frequency range indicated in the European Union (EU) recommendations. The repeated measurements in incubators were made with a calibrated magnetometer EFA 300 in the frequency range of 5-30 kHz. Effective values of magnetic flux densities of ELF EMF were determined taking account of the reference values. The results of many repeated measurements showing the values of magnetic flux density in modern incubators with plastic supporting frame, were compared with those obtained in old type incubators with iron skeleton. A power frequency of 50 Hz was detected in the incubator and the ELF EMF values were by over two orders lower than the EU reference values. The paper emphasizes the need to take a special care of newborns kept in incubators even if only the sub-reference values are detected. The EU reference values are intended for the adult human population. A baby in an incubator has much smaller dimensions, higher electric conductivity and maybe trigger another mechanism of response to ELF EMF than that indicated in this paper.

Reference Clinical Database for Fixation Stability Metrics in Normal Subjects Measured with the MAIA Microperimeter.

Science.gov (United States)

Morales, Marco U; Saker, Saker; Wilde, Craig; Pellizzari, Carlo; Pallikaris, Aristophanes; Notaroberto, Neil; Rubinstein, Martin; Rui, Chiara; Limoli, Paolo; Smolek, Michael K; Amoaku, Winfried M

2016-11-01

The purpose of this study was to establish a normal reference database for fixation stability measured with the bivariate contour ellipse area (BCEA) in the Macular Integrity Assessment (MAIA) microperimeter. Subjects were 358 healthy volunteers who had the MAIA examination. Fixation stability was assessed using two BCEA fixation indices (63% and 95% proportional values) and the percentage of fixation points within 1° and 2° from the fovea (P1 and P2). Statistical analysis was performed with linear regression and Pearson's product moment correlation coefficient. Average areas of 0.80 deg 2 (min = 0.03, max = 3.90, SD = 0.68) for the index BCEA@63% and 2.40 deg 2 (min = 0.20, max = 11.70, SD = 2.04) for the index BCEA@95% were found. The average values of P1 and P2 were 95% (min = 76, max = 100, SD = 5.31) and 99% (min = 91, max = 100, SD = 1.42), respectively. The Pearson's product moment test showed an almost perfect correlation index, r = 0.999, between BCEA@63% and BCEA@95%. Index P1 showed a very strong correlation with BCEA@63%, r = -0.924, as well as with BCEA@95%, r = -0.925. Index P2 demonstrated a slightly lower correlation with both BCEA@63% and BCEA@95%, r = -0.874 and -0.875, respectively. The single parameter of the BCEA@95% may be taken as accurately reporting fixation stability and serves as a reference database of normal subjects with a cutoff area of 2.40 ± 2.04 deg 2 in MAIA microperimeter. Fixation stability can be measured with different indices. This study originates reference fixation values for the MAIA using a single fixation index.

Database Description - DMPD | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available base Description General information of database Database name DMPD Alternative nam...e Dynamic Macrophage Pathway CSML Database DOI 10.18908/lsdba.nbdc00558-000 Creator Creator Name: Masao Naga...ty of Tokyo 4-6-1 Shirokanedai, Minato-ku, Tokyo 108-8639 Tel: +81-3-5449-5615 FAX: +83-3-5449-5442 E-mail: Database...606 Taxonomy Name: Mammalia Taxonomy ID: 40674 Database description DMPD collects...e(s) Article title: Author name(s): Journal: External Links: Original website information Database maintenan

Database Dump - fRNAdb | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available List Contact us fRNAdb Database Dump Data detail Data name Database Dump DOI 10.18908/lsdba.nbdc00452-002 De... data (tab separeted text) Data file File name: Database_Dump File URL: ftp://ftp....biosciencedbc.jp/archive/frnadb/LATEST/Database_Dump File size: 673 MB Simple search URL - Data acquisition...s. Data analysis method - Number of data entries 4 files - About This Database Database Description Download... License Update History of This Database Site Policy | Contact Us Database Dump - fRNAdb | LSDB Archive ...

Software for creating quality control database in diagnostic radiology

International Nuclear Information System (INIS)

Stoeva, M.; Spassov, G.; Tabakov, S.

2000-01-01

The paper describes a PC based program with database for quality control (QC). It keeps information about all surveyed equipment and measured parameters. The first function of the program is to extract information from old (existing) MS Excel spreadsheets with QC surveys. The second function is used for input of measurements which are automatically organized in MS Excel spreadsheets and built into the database. The spreadsheets are based on the protocols described in the EMERALD Training Scheme. In addition, the program can make statistics of all measured parameters, both in absolute term and in time

The National Solar Radiation Database (NSRDB)

Energy Technology Data Exchange (ETDEWEB)

Sengupta, Manajit; Habte, Aron; Lopez, Anthony; Xie, Yu; Molling, Christine; Gueymard, Christian

2017-03-13

This presentation provides a high-level overview of the National Solar Radiation Database (NSRDB), including sensing, measurement and forecasting, and discusses observations that are needed for research and product development.

Electromagnetic fields (UHF) increase voltage sensitivity of membrane ion channels; possible indication of cell phone effect on living cells.

Science.gov (United States)

Ketabi, N; Mobasheri, H; Faraji-Dana, R

2015-03-01

The effects of ultra high frequency (UHF) nonionizing electromagnetic fields (EMF) on the channel activities of nanopore forming protein, OmpF porin, were investigated. The voltage clamp technique was used to study the single channel activity of the pore in an artificial bilayer in the presence and absence of the electromagnetic fields at 910 to 990 MHz in real time. Channel activity patterns were used to address the effect of EMF on the dynamic, arrangement and dielectric properties of water molecules, as well as on the hydration state and arrangements of side chains lining the channel barrel. Based on the varied voltage sensitivity of the channel at different temperatures in the presence and absence of EMF, the amount of energy transferred to nano-environments of accessible groups was estimated to address the possible thermal effects of EMF. Our results show that the effects of EMF on channel activities are frequency dependent, with a maximum effect at 930 MHz. The frequency of channel gating and the voltage sensitivity is increased when the channel is exposed to EMF, while its conductance remains unchanged at all frequencies applied. We have not identified any changes in the capacitance and permeability of membrane in the presence of EMF. The effect of the EMF irradiated by cell phones is measured by Specific Absorption Rate (SAR) in artificial model of human head, Phantom. Thus, current approach applied to biological molecules and electrolytes might be considered as complement to evaluate safety of irradiating sources on biological matter at molecular level.

Spatial learning, monoamines and oxidative stress in rats exposed to 900 MHz electromagnetic field in combination with iron overload.

Science.gov (United States)

Maaroufi, Karima; Had-Aissouni, Laurence; Melon, Christophe; Sakly, Mohsen; Abdelmelek, Hafedh; Poucet, Bruno; Save, Etienne

2014-01-01

The increasing use of mobile phone technology over the last decade raises concerns about the impact of high frequency electromagnetic fields (EMF) on health. More recently, a link between EMF, iron overload in the brain and neurodegenerative disorders including Parkinson's and Alzheimer's diseases has been suggested. Co-exposure to EMF and brain iron overload may have a greater impact on brain tissues and cognitive processes than each treatment by itself. To examine this hypothesis, Long-Evans rats submitted to 900 MHz exposure or combined 900 MHz EMF and iron overload treatments were tested in various spatial learning tasks (navigation task in the Morris water maze, working memory task in the radial-arm maze, and object exploration task involving spatial and non spatial processing). Biogenic monoamines and metabolites (dopamine, serotonin) and oxidative stress were measured. Rats exposed to EMF were impaired in the object exploration task but not in the navigation and working memory tasks. They also showed alterations of monoamine content in several brain areas but mainly in the hippocampus. Rats that received combined treatment did not show greater behavioral and neurochemical deficits than EMF-exposed rats. None of the two treatments produced global oxidative stress. These results show that there is an impact of EMF on the brain and cognitive processes but this impact is revealed only in a task exploiting spontaneous exploratory activity. In contrast, there are no synergistic effects between EMF and a high content of iron in the brain. Copyright © 2013 Elsevier B.V. All rights reserved.

Is newborn melatonin production influenced by magnetic fields produced by incubators?

Science.gov (United States)

Bellieni, Carlo Valerio; Tei, Monica; Iacoponi, Francesca; Tataranno, Maria Luisa; Negro, Simona; Proietti, Fabrizio; Longini, Mariangela; Perrone, Serafina; Buonocore, Giuseppe

2012-08-01

During permanence in most incubators, newborns are very close to the electric engine, which represents a source of electromagnetic fields (EMF). Previous studies demonstrated a decrease in melatonin production in adults and animals exposed to EMF. To assess melatonin production in a group of newborns exposed to EMF, and to evaluate whether removing the babies from the source of MF can affect melatonin production. We have recruited 28 babies (study group), who had spent at least 48 h in incubator where we had previously assessed the presence of significant EMF. We have measured their mean 6-hydroxy-melatonin-sulfate (6OHMS) urine excretion at the end of their permanence in the incubators, and compared it with their mean 6OHMS excretion after having been put in cribs, where EMF are below the detectable limit (babies who were not exposed to EMF during both samples. Mean 6OHMS/cr values were respectively 5.34±4.6 and 7.68±5.1ng/mg (p=0.026) when babies were exposed to EMF in incubators, and after having been put in the crib. In the control group, mean 6OHMS/cr values in the first and in the second sample were respectively 5.91±5.41 vs 6.17±3.94ng/mg (p=0.679). The transitory increase in melatonin production soon after removing newborns from incubators demonstrates a possible influence of EMF on melatonin production in newborns. Further studies are needed to confirm these data. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

DOT Online Database

Science.gov (United States)

Page Home Table of Contents Contents Search Database Search Login Login Databases Advisory Circulars accessed by clicking below: Full-Text WebSearch Databases Database Records Date Advisory Circulars 2092 5 data collection and distribution policies. Document Database Website provided by MicroSearch

Databases

Digital Repository Service at National Institute of Oceanography (India)

Kunte, P.D.

Information on bibliographic as well as numeric/textual databases relevant to coastal geomorphology has been included in a tabular form. Databases cover a broad spectrum of related subjects like coastal environment and population aspects, coastline...

77 FR 71089 - Pilot Loading of Aeronautical Database Updates

Science.gov (United States)

2012-11-29

...) card, rather than in resident memory. The database update was accomplished by removing the SD card with... frequency distance measuring equipment (DME), and any updates that affect system operating software--that... developed with attention to data integrity. Current technology uses databases which are developed in...

New design and facilities for the International Database for Absolute Gravity Measurements (AGrav): A support for the Establishment of a new Global Absolute Gravity Reference System

Science.gov (United States)

Wziontek, Hartmut; Falk, Reinhard; Bonvalot, Sylvain; Rülke, Axel

2017-04-01

After about 10 years of successful joint operation by BGI and BKG, the International Database for Absolute Gravity Measurements "AGrav" (see references hereafter) was under a major revision. The outdated web interface was replaced by a responsive, high level web application framework based on Python and built on top of Pyramid. Functionality was added, like interactive time series plots or a report generator and the interactive map-based station overview was updated completely, comprising now clustering and the classification of stations. Furthermore, the database backend was migrated to PostgreSQL for better support of the application framework and long-term availability. As comparisons of absolute gravimeters (AG) become essential to realize a precise and uniform gravity standard, the database was extended to document the results on international and regional level, including those performed at monitoring stations equipped with SGs. By this it will be possible to link different AGs and to trace their equivalence back to the key comparisons under the auspices of International Committee for Weights and Measures (CIPM) as the best metrological realization of the absolute gravity standard. In this way the new AGrav database accommodates the demands of the new Global Absolute Gravity Reference System as recommended by the IAG Resolution No. 2 adopted in Prague 2015. The new database will be presented with focus on the new user interface and new functionality, calling all institutions involved in absolute gravimetry to participate and contribute with their information to built up a most complete picture of high precision absolute gravimetry and improve its visibility. A Digital Object Identifier (DOI) will be provided by BGI to contributors to give a better traceability and facilitate the referencing of their gravity surveys. Links and references: BGI mirror site : http://bgi.obs-mip.fr/data-products/Gravity-Databases/Absolute-Gravity-data/ BKG mirror site: http

A performance evaluation of in-memory databases

Directory of Open Access Journals (Sweden)

Abdullah Talha Kabakus

2017-10-01

Full Text Available The popularity of NoSQL databases has increased due to the need of (1 processing vast amount of data faster than the relational database management systems by taking the advantage of highly scalable architecture, (2 flexible (schema-free data structure, and, (3 low latency and high performance. Despite that memory usage is not major criteria to evaluate performance of algorithms, since these databases serve the data from memory, their memory usages are also experimented alongside the time taken to complete each operation in the paper to reveal which one uses the memory most efficiently. Currently there exists over 225 NoSQL databases that provide different features and characteristics. So it is necessary to reveal which one provides better performance for different data operations. In this paper, we experiment the widely used in-memory databases to measure their performance in terms of (1 the time taken to complete operations, and (2 how efficiently they use memory during operations. As per the results reported in this paper, there is no database that provides the best performance for all data operations. It is also proved that even though a RDMS stores its data in memory, its overall performance is worse than NoSQL databases.

A new online database of nuclear electromagnetic moments

Science.gov (United States)

Mertzimekis, Theo J.

2017-09-01

Nuclear electromagnetic (EM) moments, i.e., the magnetic dipole and the electric quadrupole moments, provide important information of nuclear structure. As in other types of experimental data available to the community, measurements of nuclear EM moments have been organized systematically in compilations since the dawn of nuclear science. However, the wealth of recent moments measurements with radioactive beams, as well as earlier existing measurements, lack an online, easy-to-access, systematically organized presence to disseminate information to researchers. In addition, available printed compilations suffer a rather long life cycle, being left behind experimental measurements published in journals or elsewhere. A new, online database (http://magneticmoments.info) focusing on nuclear EM moments has been recently developed to disseminate experimental data to the community. The database includes non-evaluated experimental data of nuclear EM moments, giving strong emphasis on frequent updates (life cycle is 3 months) and direct connection to the sources via DOI and NSR hyperlinks. It has been recently integrated in IAEA LiveChart [1], but can also be found as a standalone webapp [2]. A detailed review of the database features, as well as plans for further development and expansion in the near future is discussed.

Database Description - eSOL | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available base Description General information of database Database name eSOL Alternative nam...eator Affiliation: The Research and Development of Biological Databases Project, National Institute of Genet...nology 4259 Nagatsuta-cho, Midori-ku, Yokohama, Kanagawa 226-8501 Japan Email: Tel.: +81-45-924-5785 Database... classification Protein sequence databases - Protein properties Organism Taxonomy Name: Escherichia coli Taxonomy ID: 562 Database...i U S A. 2009 Mar 17;106(11):4201-6. External Links: Original website information Database maintenance site

"Mr. Database" : Jim Gray and the History of Database Technologies.

Science.gov (United States)

Hanwahr, Nils C

2017-12-01

Although the widespread use of the term "Big Data" is comparatively recent, it invokes a phenomenon in the developments of database technology with distinct historical contexts. The database engineer Jim Gray, known as "Mr. Database" in Silicon Valley before his disappearance at sea in 2007, was involved in many of the crucial developments since the 1970s that constitute the foundation of exceedingly large and distributed databases. Jim Gray was involved in the development of relational database systems based on the concepts of Edgar F. Codd at IBM in the 1970s before he went on to develop principles of Transaction Processing that enable the parallel and highly distributed performance of databases today. He was also involved in creating forums for discourse between academia and industry, which influenced industry performance standards as well as database research agendas. As a co-founder of the San Francisco branch of Microsoft Research, Gray increasingly turned toward scientific applications of database technologies, e. g. leading the TerraServer project, an online database of satellite images. Inspired by Vannevar Bush's idea of the memex, Gray laid out his vision of a Personal Memex as well as a World Memex, eventually postulating a new era of data-based scientific discovery termed "Fourth Paradigm Science". This article gives an overview of Gray's contributions to the development of database technology as well as his research agendas and shows that central notions of Big Data have been occupying database engineers for much longer than the actual term has been in use.

Mathematics for Databases

NARCIS (Netherlands)

ir. Sander van Laar

2007-01-01

A formal description of a database consists of the description of the relations (tables) of the database together with the constraints that must hold on the database. Furthermore the contents of a database can be retrieved using queries. These constraints and queries for databases can very well be

Materials data through a bibliographic database INIS

International Nuclear Information System (INIS)

Yamamoto, Akira; Itabashi, Keizo; Nakajima, Hidemitsu

1992-01-01

INIS (International Nuclear Information System) is a bibliographic database produced by collaboration of IAEA and its member countries, holding 1,500,000 records as of 1991. Although a bibliographic database does not provide numerical data itself, specific materials information can be obtained through retrieval specifying materials, properties conditions, measuring methods, etc. Also, 'data flagging' facilitates searching a record containing data. INIS has also a function of clearing house that provides original documents of scarce distribution. Hard copies of the technical reports or other non-conventional literatures are available. An efficient use of INIS database for the materials data is presented using an on-line terminal. (author)

The PREDICTS database: a global database of how local terrestrial biodiversity responds to human impacts

Science.gov (United States)

Hudson, Lawrence N; Newbold, Tim; Contu, Sara; Hill, Samantha L L; Lysenko, Igor; De Palma, Adriana; Phillips, Helen R P; Senior, Rebecca A; Bennett, Dominic J; Booth, Hollie; Choimes, Argyrios; Correia, David L P; Day, Julie; Echeverría-Londoño, Susy; Garon, Morgan; Harrison, Michelle L K; Ingram, Daniel J; Jung, Martin; Kemp, Victoria; Kirkpatrick, Lucinda; Martin, Callum D; Pan, Yuan; White, Hannah J; Aben, Job; Abrahamczyk, Stefan; Adum, Gilbert B; Aguilar-Barquero, Virginia; Aizen, Marcelo A; Ancrenaz, Marc; Arbeláez-Cortés, Enrique; Armbrecht, Inge; Azhar, Badrul; Azpiroz, Adrián B; Baeten, Lander; Báldi, András; Banks, John E; Barlow, Jos; Batáry, Péter; Bates, Adam J; Bayne, Erin M; Beja, Pedro; Berg, Åke; Berry, Nicholas J; Bicknell, Jake E; Bihn, Jochen H; Böhning-Gaese, Katrin; Boekhout, Teun; Boutin, Céline; Bouyer, Jérémy; Brearley, Francis Q; Brito, Isabel; Brunet, Jörg; Buczkowski, Grzegorz; Buscardo, Erika; Cabra-García, Jimmy; Calviño-Cancela, María; Cameron, Sydney A; Cancello, Eliana M; Carrijo, Tiago F; Carvalho, Anelena L; Castro, Helena; Castro-Luna, Alejandro A; Cerda, Rolando; Cerezo, Alexis; Chauvat, Matthieu; Clarke, Frank M; Cleary, Daniel F R; Connop, Stuart P; D'Aniello, Biagio; da Silva, Pedro Giovâni; Darvill, Ben; Dauber, Jens; Dejean, Alain; Diekötter, Tim; Dominguez-Haydar, Yamileth; Dormann, Carsten F; Dumont, Bertrand; Dures, Simon G; Dynesius, Mats; Edenius, Lars; Elek, Zoltán; Entling, Martin H; Farwig, Nina; Fayle, Tom M; Felicioli, Antonio; Felton, Annika M; Ficetola, Gentile F; Filgueiras, Bruno K C; Fonte, Steven J; Fraser, Lauchlan H; Fukuda, Daisuke; Furlani, Dario; Ganzhorn, Jörg U; Garden, Jenni G; Gheler-Costa, Carla; Giordani, Paolo; Giordano, Simonetta; Gottschalk, Marco S; Goulson, Dave; Gove, Aaron D; Grogan, James; Hanley, Mick E; Hanson, Thor; Hashim, Nor R; Hawes, Joseph E; Hébert, Christian; Helden, Alvin J; Henden, John-André; Hernández, Lionel; Herzog, Felix; Higuera-Diaz, Diego; Hilje, Branko; Horgan, Finbarr G; Horváth, Roland; Hylander, Kristoffer; Isaacs-Cubides, Paola; Ishitani, Masahiro; Jacobs, Carmen T; Jaramillo, Víctor J; Jauker, Birgit; Jonsell, Mats; Jung, Thomas S; Kapoor, Vena; Kati, Vassiliki; Katovai, Eric; Kessler, Michael; Knop, Eva; Kolb, Annette; Kőrösi, Ádám; Lachat, Thibault; Lantschner, Victoria; Le Féon, Violette; LeBuhn, Gretchen; Légaré, Jean-Philippe; Letcher, Susan G; Littlewood, Nick A; López-Quintero, Carlos A; Louhaichi, Mounir; Lövei, Gabor L; Lucas-Borja, Manuel Esteban; Luja, Victor H; Maeto, Kaoru; Magura, Tibor; Mallari, Neil Aldrin; Marin-Spiotta, Erika; Marshall, E J P; Martínez, Eliana; Mayfield, Margaret M; Mikusinski, Grzegorz; Milder, Jeffrey C; Miller, James R; Morales, Carolina L; Muchane, Mary N; Muchane, Muchai; Naidoo, Robin; Nakamura, Akihiro; Naoe, Shoji; Nates-Parra, Guiomar; Navarrete Gutierrez, Dario A; Neuschulz, Eike L; Noreika, Norbertas; Norfolk, Olivia; Noriega, Jorge Ari; Nöske, Nicole M; O'Dea, Niall; Oduro, William; Ofori-Boateng, Caleb; Oke, Chris O; Osgathorpe, Lynne M; Paritsis, Juan; Parra-H, Alejandro; Pelegrin, Nicolás; Peres, Carlos A; Persson, Anna S; Petanidou, Theodora; Phalan, Ben; Philips, T Keith; Poveda, Katja; Power, Eileen F; Presley, Steven J; Proença, Vânia; Quaranta, Marino; Quintero, Carolina; Redpath-Downing, Nicola A; Reid, J Leighton; Reis, Yana T; Ribeiro, Danilo B; Richardson, Barbara A; Richardson, Michael J; Robles, Carolina A; Römbke, Jörg; Romero-Duque, Luz Piedad; Rosselli, Loreta; Rossiter, Stephen J; Roulston, T'ai H; Rousseau, Laurent; Sadler, Jonathan P; Sáfián, Szabolcs; Saldaña-Vázquez, Romeo A; Samnegård, Ulrika; Schüepp, Christof; Schweiger, Oliver; Sedlock, Jodi L; Shahabuddin, Ghazala; Sheil, Douglas; Silva, Fernando A B; Slade, Eleanor M; Smith-Pardo, Allan H; Sodhi, Navjot S; Somarriba, Eduardo J; Sosa, Ramón A; Stout, Jane C; Struebig, Matthew J; Sung, Yik-Hei; Threlfall, Caragh G; Tonietto, Rebecca; Tóthmérész, Béla; Tscharntke, Teja; Turner, Edgar C; Tylianakis, Jason M; Vanbergen, Adam J; Vassilev, Kiril; Verboven, Hans A F; Vergara, Carlos H; Vergara, Pablo M; Verhulst, Jort; Walker, Tony R; Wang, Yanping; Watling, James I; Wells, Konstans; Williams, Christopher D; Willig, Michael R; Woinarski, John C Z; Wolf, Jan H D; Woodcock, Ben A; Yu, Douglas W; Zaitsev, Andrey S; Collen, Ben; Ewers, Rob M; Mace, Georgina M; Purves, Drew W; Scharlemann, Jörn P W; Purvis, Andy

2014-01-01

Biodiversity continues to decline in the face of increasing anthropogenic pressures such as habitat destruction, exploitation, pollution and introduction of alien species. Existing global databases of species’ threat status or population time series are dominated by charismatic species. The collation of datasets with broad taxonomic and biogeographic extents, and that support computation of a range of biodiversity indicators, is necessary to enable better understanding of historical declines and to project – and avert – future declines. We describe and assess a new database of more than 1.6 million samples from 78 countries representing over 28,000 species, collated from existing spatial comparisons of local-scale biodiversity exposed to different intensities and types of anthropogenic pressures, from terrestrial sites around the world. The database contains measurements taken in 208 (of 814) ecoregions, 13 (of 14) biomes, 25 (of 35) biodiversity hotspots and 16 (of 17) megadiverse countries. The database contains more than 1% of the total number of all species described, and more than 1% of the described species within many taxonomic groups – including flowering plants, gymnosperms, birds, mammals, reptiles, amphibians, beetles, lepidopterans and hymenopterans. The dataset, which is still being added to, is therefore already considerably larger and more representative than those used by previous quantitative models of biodiversity trends and responses. The database is being assembled as part of the PREDICTS project (Projecting Responses of Ecological Diversity In Changing Terrestrial Systems – http://www.predicts.org.uk). We make site-level summary data available alongside this article. The full database will be publicly available in 2015. PMID:25558364

Extrapolation techniques evaluating 24 hours of average electromagnetic field emitted by radio base station installations: spectrum analyzer measurements of LTE and UMTS signals

International Nuclear Information System (INIS)

Mossetti, Stefano; Bartolo, Daniela de; Nava, Elisa; Veronese, Ivan; Cantone, Marie Claire; Cosenza, Cristina

2017-01-01

International and national organizations have formulated guidelines establishing limits for occupational and residential electromagnetic field (EMF) exposure at high-frequency fields. Italian legislation fixed 20 V/m as a limit for public protection from exposure to EMFs in the frequency range 0.1 MHz-3 GHz and 6 V/m as a reference level. Recently, the law was changed and the reference level must now be evaluated as the 24-hour average value, instead of the previous highest 6 minutes in a day. The law refers to a technical guide (CEI 211-7/E published in 2013) for the extrapolation techniques that public authorities have to use when assessing exposure for compliance with limits. In this work, we present measurements carried out with a vectorial spectrum analyzer to identify technical critical aspects in these extrapolation techniques, when applied to UMTS and LTE signals. We focused also on finding a good balance between statistically significant values and logistic managements in control activity, as the signal trend in situ is not known. Measurements were repeated several times over several months and for different mobile companies. The outcome presented in this article allowed us to evaluate the reliability of the extrapolation results obtained and to have a starting point for defining operating procedures. (authors)

Geo-scientific database for research and development purposes

International Nuclear Information System (INIS)

Tabani, P.; Mangeot, A.; Crabol, V.; Delage, P.; Dewonck, S.; Auriere, C.

2012-01-01

Document available in extended abstract form only. The Research and Development Division must manage, secure and reliable manner, a large number of data from scientific disciplines and diverse means of acquisition (observations, measurements, experiments, etc.). This management is particularly important for the Underground research Laboratory, the source of many recording continuous measurements. Thus, from its conception, Andra has implemented two management tools of scientific information, the 'Acquisition System and Data Management' [SAGD] and GEO database with its associated applications. Beyond its own needs, Andra wants to share its achievements with the scientific community, and it therefore provides the data stored in its databases or samples of rock or water when they are available. Acquisition and Data Management (SAGD) This system manages data from sensors installed at several sites. Some sites are on the surface (piezometric, atmospheric and environmental stations), the other are in the Underground Research Laboratory. This system also incorporates data from experiments in which Andra participates in Mont Terri Laboratory in Switzerland. S.A.G.D fulfils these objectives by: - Make available in real time on a single system, with scientists from Andra but also different partners or providers who need it, all experimental data from measurement points - Displaying the recorded data on temporal windows and specific time step, - Allowing remote control of the experimentations, - Ensuring the traceability of all recorded information, - Ensuring data storage in a data base. S.A.G.D has been deployed in the first experimental drift at -445 m in November 2004. It was subsequently extended to the underground Mont Terri laboratory in Switzerland in 2005, to the entire surface logging network of the Meuse / Haute-Marne Center in 2008 and to the environmental network in 2011. All information is acquired, stored and manage by a software called Geoscope. This software

Proposal for a high-energy nuclear database

International Nuclear Information System (INIS)

Brown, D.A.; Vogt, R.

2006-01-01

We propose to develop a high-energy heavy-ion experimental database and make it accessible to the scientific community through an on-line interface. This database will be searchable and cross-indexed with relevant publications, including published detector descriptions. Since this database will be a community resource, it requires the high-energy nuclear physics community's financial and manpower support. This database should eventually contain all published data from Bevalac, AGS and SPS to RHIC and LHC energies, proton-proton to nucleus-nucleus collisions as well as other relevant systems, and all measured observables. Such a database would have tremendous scientific payoff as it makes systematic studies easier and allows simpler benchmarking of theoretical models to a broad range of old and new experiments. Furthermore, there is a growing need for compilations of high-energy nuclear data for applications including stockpile stewardship, technology development for inertial confinement fusion and target and source development for upcoming facilities such as the Next Linear Collider. To enhance the utility of this database, we propose periodically performing evaluations of the data and summarizing the results in topical reviews. (author)

Proposal for a High Energy Nuclear Database

International Nuclear Information System (INIS)

Brown, D A; Vogt, R

2005-01-01

The authors propose to develop a high-energy heavy-ion experimental database and make it accessible to the scientific community through an on-line interface. This database will be searchable and cross-indexed with relevant publications, including published detector descriptions. Since this database will be a community resource, it requires the high-energy nuclear physics community's financial and manpower support. This database should eventually contain all published data from Bevalac, AGS and SPS to RHIC and CERN-LHC energies, proton-proton to nucleus-nucleus collisions as well as other relevant systems, and all measured observables. Such a database would have tremendous scientific payoff as it makes systematic studies easier and allows simpler benchmarking of theoretical models to a broad range of old and new experiments. Furthermore, there is a growing need for compilations of high-energy nuclear data for applications including stockpile stewardship, technology development for inertial confinement fusion and target and source development for upcoming facilities such as the Next Linear Collider. To enhance the utility of this database, they propose periodically performing evaluations of the data and summarizing the results in topical reviews

Novel Sensorless Six-Step Communication Strategy for a Surface Permanent Magnet Synchronous Motor with DC Link Measurement

DEFF Research Database (Denmark)

Munteanu, A.; Agarlita, S. C.; Blaabjerg, Frede

2012-01-01

The present paper introduces a novel six-step commutation strategy for sensorless control applied for a surface permanent magnet synchronous motor that implies only dc link measurement (battery current and battery voltage). The control strategy makes use of a modified I-f starting procedure and t......-crossing of the back-emf are obtained from an observer that uses both current and battery voltage. The case study is represented by a surface permanent magnet synchronous motor prototype (6 /8 configuration), designed for the automotive air conditioning compressor drive....

Nighttime exposure to electromagnetic fields and childhood leukemia: an extended pooled analysis

DEFF Research Database (Denmark)

Schüz, Joachim; Svendsen, Anne Louise; Linet, Martha S

2007-01-01

analysis of case-control studies on ELF EMF exposure and risk of childhood leukemia to examine nighttime residential exposures. Data from four countries (Canada, Germany, the United Kingdom, and the United States) were included in the analysis, comprising 1,842 children diagnosed with leukemia and 3......,099 controls (diagnosis dates ranged from 1988 to 1996). The odds ratios for nighttime ELF EMF exposure for categories of 0.1-or=0.4 microT as compared with ... that nighttime measures are more appropriate; hence, the observed association between ELF EMF and childhood leukemia still lacks a plausible explanation....

Database development and management

CERN Document Server

Chao, Lee

2006-01-01

Introduction to Database Systems Functions of a DatabaseDatabase Management SystemDatabase ComponentsDatabase Development ProcessConceptual Design and Data Modeling Introduction to Database Design Process Understanding Business ProcessEntity-Relationship Data Model Representing Business Process with Entity-RelationshipModelTable Structure and NormalizationIntroduction to TablesTable NormalizationTransforming Data Models to Relational Databases .DBMS Selection Transforming Data Models to Relational DatabasesEnforcing ConstraintsCreating Database for Business ProcessPhysical Design and Database

Electrochemical determination of oxygen stoichiometry and entropy in oxides

DEFF Research Database (Denmark)

Zachau-Christiansen, Birgit; Jacobsen, Torben; Skaarup, Steen

1996-01-01

in the temperature range 800-1000 degrees C. With scan rates of 2 mu V/s potential sweeps on CeO2 are reversible. The change in entropy is determined by either subtraction of e.m.f. curves obtained by potential sweeps of different temperatures or by measuring the e.m.f. during a temperature scan. The latter method...

The AMMA database

Science.gov (United States)

Boichard, Jean-Luc; Brissebrat, Guillaume; Cloche, Sophie; Eymard, Laurence; Fleury, Laurence; Mastrorillo, Laurence; Moulaye, Oumarou; Ramage, Karim

2010-05-01

The AMMA project includes aircraft, ground-based and ocean measurements, an intensive use of satellite data and diverse modelling studies. Therefore, the AMMA database aims at storing a great amount and a large variety of data, and at providing the data as rapidly and safely as possible to the AMMA research community. In order to stimulate the exchange of information and collaboration between researchers from different disciplines or using different tools, the database provides a detailed description of the products and uses standardized formats. The AMMA database contains: - AMMA field campaigns datasets; - historical data in West Africa from 1850 (operational networks and previous scientific programs); - satellite products from past and future satellites, (re-)mapped on a regular latitude/longitude grid and stored in NetCDF format (CF Convention); - model outputs from atmosphere or ocean operational (re-)analysis and forecasts, and from research simulations. The outputs are processed as the satellite products are. Before accessing the data, any user has to sign the AMMA data and publication policy. This chart only covers the use of data in the framework of scientific objectives and categorically excludes the redistribution of data to third parties and the usage for commercial applications. Some collaboration between data producers and users, and the mention of the AMMA project in any publication is also required. The AMMA database and the associated on-line tools have been fully developed and are managed by two teams in France (IPSL Database Centre, Paris and OMP, Toulouse). Users can access data of both data centres using an unique web portal. This website is composed of different modules : - Registration: forms to register, read and sign the data use chart when an user visits for the first time - Data access interface: friendly tool allowing to build a data extraction request by selecting various criteria like location, time, parameters... The request can

Database reliability engineering designing and operating resilient database systems

CERN Document Server

Campbell, Laine

2018-01-01

The infrastructure-as-code revolution in IT is also affecting database administration. With this practical book, developers, system administrators, and junior to mid-level DBAs will learn how the modern practice of site reliability engineering applies to the craft of database architecture and operations. Authors Laine Campbell and Charity Majors provide a framework for professionals looking to join the ranks of today’s database reliability engineers (DBRE). You’ll begin by exploring core operational concepts that DBREs need to master. Then you’ll examine a wide range of database persistence options, including how to implement key technologies to provide resilient, scalable, and performant data storage and retrieval. With a firm foundation in database reliability engineering, you’ll be ready to dive into the architecture and operations of any modern database. This book covers: Service-level requirements and risk management Building and evolving an architecture for operational visibility ...

Gas Chromatography and Mass Spectrometry Measurements and Protocols for Database and Library Development Relating to Organic Species in Support of the Mars Science Laboratory

Science.gov (United States)

Misra, P.; Garcia, R.; Mahaffy, P. R.

2010-04-01

An organic contaminant database and library has been developed for use with the Sample Analysis at Mars (SAM) instrumentation utilizing laboratory-based Gas Chromatography-Mass Spectrometry measurements of pyrolyzed and baked material samples.

Solving Relational Database Problems with ORDBMS in an Advanced Database Course

Science.gov (United States)

Wang, Ming

2011-01-01

This paper introduces how to use the object-relational database management system (ORDBMS) to solve relational database (RDB) problems in an advanced database course. The purpose of the paper is to provide a guideline for database instructors who desire to incorporate the ORDB technology in their traditional database courses. The paper presents…

Designing an international industrial hygiene database of exposures among workers in the asphalt industry.

Science.gov (United States)

Burstyn, I; Kromhout, H; Cruise, P J; Brennan, P

2000-01-01

The objective of this project was to construct a database of exposure measurements which would be used to retrospectively assess the intensity of various exposures in an epidemiological study of cancer risk among asphalt workers. The database was developed as a stand-alone Microsoft Access 2.0 application, which could work in each of the national centres. Exposure data included in the database comprised measurements of exposure levels, plus supplementary information on production characteristics which was analogous to that used to describe companies enrolled in the study. The database has been successfully implemented in eight countries, demonstrating the flexibility and data security features adequate to the task. The database allowed retrieval and consistent coding of 38 data sets of which 34 have never been described in peer-reviewed scientific literature. We were able to collect most of the data intended. As of February 1999 the database consisted of 2007 sets of measurements from persons or locations. The measurements appeared to be free from any obvious bias. The methodology embodied in the creation of the database can be usefully employed to develop exposure assessment tools in epidemiological studies.

Generalized Database Management System Support for Numeric Database Environments.

Science.gov (United States)

Dominick, Wayne D.; Weathers, Peggy G.

1982-01-01

This overview of potential for utilizing database management systems (DBMS) within numeric database environments highlights: (1) major features, functions, and characteristics of DBMS; (2) applicability to numeric database environment needs and user needs; (3) current applications of DBMS technology; and (4) research-oriented and…

A Review of Stellar Abundance Databases and the Hypatia Catalog Database

Science.gov (United States)

Hinkel, Natalie Rose

2018-01-01

The astronomical community is interested in elements from lithium to thorium, from solar twins to peculiarities of stellar evolution, because they give insight into different regimes of star formation and evolution. However, while some trends between elements and other stellar or planetary properties are well known, many other trends are not as obvious and are a point of conflict. For example, stars that host giant planets are found to be consistently enriched in iron, but the same cannot be definitively said for any other element. Therefore, it is time to take advantage of large stellar abundance databases in order to better understand not only the large-scale patterns, but also the more subtle, small-scale trends within the data.In this overview to the special session, I will present a review of large stellar abundance databases that are both currently available (i.e. RAVE, APOGEE) and those that will soon be online (i.e. Gaia-ESO, GALAH). Additionally, I will discuss the Hypatia Catalog Database (www.hypatiacatalog.com) -- which includes abundances from individual literature sources that observed stars within 150pc. The Hypatia Catalog currently contains 72 elements as measured within ~6000 stars, with a total of ~240,000 unique abundance determinations. The online database offers a variety of solar normalizations, stellar properties, and planetary properties (where applicable) that can all be viewed through multiple interactive plotting interfaces as well as in a tabular format. By analyzing stellar abundances for large populations of stars and from a variety of different perspectives, a wealth of information can be revealed on both large and small scales.

Electromagnetic fields and the issue of biological effects from a chemical-physical perspective; Elektromagnetiska faelt ('EMF') och fraagan om biologiska effekter utifraan ett kemiskt-fysikaliskt perspektiv

Energy Technology Data Exchange (ETDEWEB)

Cedervall, Bjoern (Unit of Med. Radiation Physics and Med. Radiation Biology, Dept. Oncology and Pathology, Karolinska Inst., Stockholm (Sweden))

2009-06-15

The question of whether electric and/or magnetic fields in various respects are dangerous or not is of interdisciplinary character. That high electric or magnetic fields may give rise to dangerous currents is well known. More controversial is the topic of genotoxic effects, i.e. effects which have their origin in changes in DNA or effects on other parts of the molecular machinery of the cell and which if extended could result is some form of disease (e.g. neurological disorders). One may see this as a chain of possible events according to: 'Exposure->antenna->interaction between EMF and atoms or molecules->molecular biology/biochemistry->->disease'. The topics that have been discussed in this report have often been neglected but may shed light on the complexity of relevant laboratory experiments and theoretical interpretations. This report includes: descriptions of an exposure, what is meant by dose, what is relevant from a molecular aspect at various frequency ranges, thermal and non-thermal effects respectively, and ferromagnetic particles as a contaminant in the laboratory environment as well as in Nature. One way of approaching the scientific questions is to analyze the energy density of electric and magnetic fields and then put these into the context of the natural environment in single cells or whole individuals. Of particular interest is the order of magnitude for forces and energies as they occur naturally in cells (e.g. for pulling apart chromosomes during cell division). As is clear from the corresponding sections of this report, it seems improbable that EMF can break chemical bonds (and thereby cause DNA strand breaks) if we restrict ourselves to EMF contexts of daily exposures in the home or most workplaces. DNA damage is generally classified into half a dozen major categories. Among these damage categories the DNA double-strand breaks are considered to be among the most severe as these may give rise to mutations, chromosomal aberrations

The Danish Sarcoma Database

Directory of Open Access Journals (Sweden)

Jorgensen PH

2016-10-01

Full Text Available Peter Holmberg Jørgensen,1 Gunnar Schwarz Lausten,2 Alma B Pedersen3 1Tumor Section, Department of Orthopedic Surgery, Aarhus University Hospital, Aarhus, 2Tumor Section, Department of Orthopedic Surgery, Rigshospitalet, Copenhagen, 3Department of Clinical Epidemiology, Aarhus University Hospital, Aarhus, Denmark Aim: The aim of the database is to gather information about sarcomas treated in Denmark in order to continuously monitor and improve the quality of sarcoma treatment in a local, a national, and an international perspective. Study population: Patients in Denmark diagnosed with a sarcoma, both skeletal and ekstraskeletal, are to be registered since 2009. Main variables: The database contains information about appearance of symptoms; date of receiving referral to a sarcoma center; date of first visit; whether surgery has been performed elsewhere before referral, diagnosis, and treatment; tumor characteristics such as location, size, malignancy grade, and growth pattern; details on treatment (kind of surgery, amount of radiation therapy, type and duration of chemotherapy; complications of treatment; local recurrence and metastases; and comorbidity. In addition, several quality indicators are registered in order to measure the quality of care provided by the hospitals and make comparisons between hospitals and with international standards. Descriptive data: Demographic patient-specific data such as age, sex, region of living, comorbidity, World Health Organization's International Classification of Diseases – tenth edition codes and TNM Classification of Malignant Tumours, and date of death (after yearly coupling to the Danish Civil Registration System. Data quality and completeness are currently secured. Conclusion: The Danish Sarcoma Database is population based and includes sarcomas occurring in Denmark since 2009. It is a valuable tool for monitoring sarcoma incidence and quality of treatment and its improvement, postoperative

Automatic pattern localization across layout database and photolithography mask

Science.gov (United States)

Morey, Philippe; Brault, Frederic; Beisser, Eric; Ache, Oliver; Röth, Klaus-Dieter

2016-03-01

Advanced process photolithography masks require more and more controls for registration versus design and critical dimension uniformity (CDU). The distribution of the measurement points should be distributed all over the whole mask and may be denser in areas critical to wafer overlay requirements. This means that some, if not many, of theses controls should be made inside the customer die and may use non-dedicated patterns. It is then mandatory to access the original layout database to select patterns for the metrology process. Finding hundreds of relevant patterns in a database containing billions of polygons may be possible, but in addition, it is mandatory to create the complete metrology job fast and reliable. Combining, on one hand, a software expertise in mask databases processing and, on the other hand, advanced skills in control and registration equipment, we have developed a Mask Dataprep Station able to select an appropriate number of measurement targets and their positions in a huge database and automatically create measurement jobs on the corresponding area on the mask for the registration metrology system. In addition, the required design clips are generated from the database in order to perform the rendering procedure on the metrology system. This new methodology has been validated on real production line for the most advanced process. This paper presents the main challenges that we have faced, as well as some results on the global performances.

THE EXTRAGALACTIC DISTANCE DATABASE

International Nuclear Information System (INIS)

Tully, R. Brent; Courtois, Helene M.; Jacobs, Bradley A.; Rizzi, Luca; Shaya, Edward J.; Makarov, Dmitry I.

2009-01-01

A database can be accessed on the Web at http://edd.ifa.hawaii.edu that was developed to promote access to information related to galaxy distances. The database has three functional components. First, tables from many literature sources have been gathered and enhanced with links through a distinct galaxy naming convention. Second, comparisons of results both at the levels of parameters and of techniques have begun and are continuing, leading to increasing homogeneity and consistency of distance measurements. Third, new material is presented arising from ongoing observational programs at the University of Hawaii 2.2 m telescope, radio telescopes at Green Bank, Arecibo, and Parkes and with the Hubble Space Telescope. This new observational material is made available in tandem with related material drawn from archives and passed through common analysis pipelines.

The magnet database system

International Nuclear Information System (INIS)

Ball, M.J.; Delagi, N.; Horton, B.; Ivey, J.C.; Leedy, R.; Li, X.; Marshall, B.; Robinson, S.L.; Tompkins, J.C.

1992-01-01

The Test Department of the Magnet Systems Division of the Superconducting Super Collider Laboratory (SSCL) is developing a central database of SSC magnet information that will be available to all magnet scientists at the SSCL or elsewhere, via network connections. The database contains information on the magnets' major components, configuration information (specifying which individual items were used in each cable, coil, and magnet), measurements made at major fabrication stages, and the test results on completed magnets. These data will facilitate the correlation of magnet performance with the properties of its constituents. Recent efforts have focused on the development of procedures for user-friendly access to the data, including displays in the format of the production open-quotes travelerclose quotes data sheets, standard summary reports, and a graphical interface for ad hoc queues and plots

License - Trypanosomes Database | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available switchLanguage; BLAST Search Image Search Home About Archive Update History Data List Contact us Trypanoso... Attribution-Share Alike 2.1 Japan . If you use data from this database, please be sure attribute this database as follows: Trypanoso...nse Update History of This Database Site Policy | Contact Us License - Trypanosomes Database | LSDB Archive ...

Residential characteristics and radiofrequency electromagnetic field exposures from bedroom measurements in Germany

DEFF Research Database (Denmark)

Breckenkamp, J; Blettner, M; Schüz, J

2012-01-01

The objectives of this study were to assess total exposure to radiofrequency electromagnetic fields (RF-EMF) in bedrooms and the contribution of different radioservices (FM radio, analogue TV and DVB-T, TETRA, GSM900 downlink, GSM1800 downlink, UMTS downlink, DECT, and wireless LAN and blue tooth......) to the total exposure. Additional aims were to describe the proportion of measuring values above the detection limit of the dosimeters and to characterize the differences in exposure patterns associated with self-reported residential characteristics. Exposure to RF sources in bedrooms was measured using...... Antennessa(®) EME Spy 120 dosimeters in 1,348 households in Germany; 280 measures were available for each frequency band per household. Mean electrical field strengths and power flux densities were calculated. Power flux densities allow the calculation of proportions of different radioservices on total...

An online database of nuclear electromagnetic moments

International Nuclear Information System (INIS)

Mertzimekis, T.J.; Stamou, K.; Psaltis, A.

2016-01-01

Measurements of nuclear magnetic dipole and electric quadrupole moments are considered quite important for the understanding of nuclear structure both near and far from the valley of stability. The recent advent of radioactive beams has resulted in a plethora of new, continuously flowing, experimental data on nuclear structure – including nuclear moments – which hinders the information management. A new, dedicated, public and user friendly online database ( (http://magneticmoments.info)) has been created comprising experimental data of nuclear electromagnetic moments. The present database supersedes existing printed compilations, including also non-evaluated series of data and relevant meta-data, while putting strong emphasis on bimonthly updates. The scope, features and extensions of the database are reported.

Investigations of a zirconia solid electrolyte oxygen sensor in liquid lead

Energy Technology Data Exchange (ETDEWEB)

Rivai, Abu Khalid, E-mail: rivai.abukhalid@jaea.go.j [Department of Nuclear Engineering, Graduate School of Science and Engineering, Tokyo Institute of Technology, N1-18, 2-12-1, O-okayama, Meguro-ku, Tokyo 152-8550 (Japan); Takahashi, Minoru, E-mail: mtakahas@nr.titech.ac.j [Research Laboratory for Nuclear Reactors, Tokyo Institute of Technology, N1-18, 2-12-1, O-okayama, Meguro-ku, Tokyo 152-8550 (Japan)

2010-03-15

Investigations of a magnesia-stabilized zirconia solid electrolyte oxygen sensor for oxygen control measurement in liquid lead were carried out. The fluid of Bi/Bi{sub 2}O{sub 3} as a reference electrode and a molybdenum wire as a working electrode to detect the output signal of the sensor were used. The Nernst equation was used to estimate the electromotive force (EMF) values theoretically. The temperatures of liquid lead were 500, 550 and 600 deg. C. The results showed that the injection gas temperatures did not affect the detected EMF, the sensor responded well to quick changes of oxygen activity in liquid lead, and the discrepancy between the measured and theoretical EMF of the oxygen sensor output signal was higher at 500 deg. C than at 550 and 600 deg. C.

Odor and Noise Intolerance in Persons with Self-Reported Electromagnetic Hypersensitivity

Directory of Open Access Journals (Sweden)

Steven Nordin

2014-08-01

Full Text Available Lack of confirmation of symptoms attributed to electromagnetic fields (EMF and triggered by EMF exposure has highlighted the role of individual factors. Prior observations indicate intolerance to other types of environmental exposures among persons with electromagnetic hypersensitivity (EHS. This study assessed differences in odor and noise intolerance between persons with EHS and healthy controls by use of subscales and global measures of the Chemical Sensitivity Scale (CSS and the Noise Sensitivity Scale (NSS. The EHS group scored significantly higher than the controls on all CSS and NSS scales. Correlation coefficients between CSS and NSS scores ranged from 0.60 to 0.65 across measures. The findings suggest an association between EHS and odor and noise intolerance, encouraging further investigation of individual factors for understanding EMF-related symptoms.

Federal databases

International Nuclear Information System (INIS)

Welch, M.J.; Welles, B.W.

1988-01-01

Accident statistics on all modes of transportation are available as risk assessment analytical tools through several federal agencies. This paper reports on the examination of the accident databases by personal contact with the federal staff responsible for administration of the database programs. This activity, sponsored by the Department of Energy through Sandia National Laboratories, is an overview of the national accident data on highway, rail, air, and marine shipping. For each mode, the definition or reporting requirements of an accident are determined and the method of entering the accident data into the database is established. Availability of the database to others, ease of access, costs, and who to contact were prime questions to each of the database program managers. Additionally, how the agency uses the accident data was of major interest

Designing a database for performance assessment: Lessons learned from WIPP

International Nuclear Information System (INIS)

Martell, M.A.; Schenker, A.

1997-01-01

The Waste Isolation Pilot Plant (WIPP) Compliance Certification Application (CCA) Performance Assessment (PA) used a relational database that was originally designed only to supply the input parameters required for implementation of the PA codes. Reviewers used the database as a point of entry to audit quality assurance measures for control, traceability, and retrievability of input information used for analysis, and output/work products. During these audits it became apparent that modifications to the architecture and scope of the database would benefit the EPA regulator and other stakeholders when reviewing the recertification application. This paper contains a discussion of the WPP PA CCA database and lessons learned for designing a database

The YH database: the first Asian diploid genome database

DEFF Research Database (Denmark)

Li, Guoqing; Ma, Lijia; Song, Chao

2009-01-01

genome consensus. The YH database is currently one of the three personal genome database, organizing the original data and analysis results in a user-friendly interface, which is an endeavor to achieve fundamental goals for establishing personal medicine. The database is available at http://yh.genomics.org.cn....

Evaluation of specific absorption rate as a dosimetric quantity for electromagnetic fields bioeffects.

Directory of Open Access Journals (Sweden)

Dimitris J Panagopoulos

Full Text Available PURPOSE: To evaluate SAR as a dosimetric quantity for EMF bioeffects, and identify ways for increasing the precision in EMF dosimetry and bioactivity assessment. METHODS: We discuss the interaction of man-made electromagnetic waves with biological matter and calculate the energy transferred to a single free ion within a cell. We analyze the physics and biology of SAR and evaluate the methods of its estimation. We discuss the experimentally observed non-linearity between electromagnetic exposure and biological effect. RESULTS: WE FIND THAT: a The energy absorbed by living matter during exposure to environmentally accounted EMFs is normally well below the thermal level. b All existing methods for SAR estimation, especially those based upon tissue conductivity and internal electric field, have serious deficiencies. c The only method to estimate SAR without large error is by measuring temperature increases within biological tissue, which normally are negligible for environmental EMF intensities, and thus cannot be measured. CONCLUSIONS: SAR actually refers to thermal effects, while the vast majority of the recorded biological effects from man-made non-ionizing environmental radiation are non-thermal. Even if SAR could be accurately estimated for a whole tissue, organ, or body, the biological/health effect is determined by tiny amounts of energy/power absorbed by specific biomolecules, which cannot be calculated. Moreover, it depends upon field parameters not taken into account in SAR calculation. Thus, SAR should not be used as the primary dosimetric quantity, but used only as a complementary measure, always reporting the estimating method and the corresponding error. Radiation/field intensity along with additional physical parameters (such as frequency, modulation etc which can be directly and in any case more accurately measured on the surface of biological tissues, should constitute the primary measure for EMF exposures, in spite of similar

Evaluation of specific absorption rate as a dosimetric quantity for electromagnetic fields bioeffects.

Science.gov (United States)

Panagopoulos, Dimitris J; Johansson, Olle; Carlo, George L

2013-01-01

To evaluate SAR as a dosimetric quantity for EMF bioeffects, and identify ways for increasing the precision in EMF dosimetry and bioactivity assessment. We discuss the interaction of man-made electromagnetic waves with biological matter and calculate the energy transferred to a single free ion within a cell. We analyze the physics and biology of SAR and evaluate the methods of its estimation. We discuss the experimentally observed non-linearity between electromagnetic exposure and biological effect. WE FIND THAT: a) The energy absorbed by living matter during exposure to environmentally accounted EMFs is normally well below the thermal level. b) All existing methods for SAR estimation, especially those based upon tissue conductivity and internal electric field, have serious deficiencies. c) The only method to estimate SAR without large error is by measuring temperature increases within biological tissue, which normally are negligible for environmental EMF intensities, and thus cannot be measured. SAR actually refers to thermal effects, while the vast majority of the recorded biological effects from man-made non-ionizing environmental radiation are non-thermal. Even if SAR could be accurately estimated for a whole tissue, organ, or body, the biological/health effect is determined by tiny amounts of energy/power absorbed by specific biomolecules, which cannot be calculated. Moreover, it depends upon field parameters not taken into account in SAR calculation. Thus, SAR should not be used as the primary dosimetric quantity, but used only as a complementary measure, always reporting the estimating method and the corresponding error. Radiation/field intensity along with additional physical parameters (such as frequency, modulation etc) which can be directly and in any case more accurately measured on the surface of biological tissues, should constitute the primary measure for EMF exposures, in spite of similar uncertainty to predict the biological effect due to non-linearity.

Database Description - tRNADB-CE | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available switchLanguage; BLAST Search Image Search Home About Archive Update History Data List Contact us tRNAD...B-CE Database Description General information of database Database name tRNADB-CE Alter...CC BY-SA Detail Background and funding Name: MEXT Integrated Database Project Reference(s) Article title: tRNAD... 2009 Jan;37(Database issue):D163-8. External Links: Article title: tRNADB-CE 2011: tRNA gene database curat...n Download License Update History of This Database Site Policy | Contact Us Database Description - tRNADB-CE | LSDB Archive ...

Palaeo sea-level and ice-sheet databases: problems, strategies and perspectives

Science.gov (United States)

Rovere, Alessio; Düsterhus, André; Carlson, Anders; Barlow, Natasha; Bradwell, Tom; Dutton, Andrea; Gehrels, Roland; Hibbert, Fiona; Hijma, Marc; Horton, Benjamin; Klemann, Volker; Kopp, Robert; Sivan, Dorit; Tarasov, Lev; Törnqvist, Torbjorn

2016-04-01

Databases of palaeoclimate data have driven many major developments in understanding the Earth system. The measurement and interpretation of palaeo sea-level and ice-sheet data that form such databases pose considerable challenges to the scientific communities that use them for further analyses. In this paper, we build on the experience of the PALSEA (PALeo constraints on SEA level rise) community, which is a working group inside the PAGES (Past Global Changes) project, to describe the challenges and best strategies that can be adopted to build a self-consistent and standardised database of geological and geochemical data related to palaeo sea levels and ice sheets. Our aim in this paper is to identify key points that need attention and subsequent funding when undertaking the task of database creation. We conclude that any sea-level or ice-sheet database must be divided into three instances: i) measurement; ii) interpretation; iii) database creation. Measurement should include postion, age, description of geological features, and quantification of uncertainties. All must be described as objectively as possible. Interpretation can be subjective, but it should always include uncertainties and include all the possible interpretations, without unjustified a priori exclusions. We propose that, in the creation of a database, an approach based on Accessibility, Transparency, Trust, Availability, Continued updating, Completeness and Communication of content (ATTAC3) must be adopted. Also, it is essential to consider the community structure that creates and benefits of a database. We conclude that funding sources should consider to address not only the creation of original data in specific research-question oriented projects, but also include the possibility to use part of the funding for IT-related and database creation tasks, which are essential to guarantee accessibility and maintenance of the collected data.

Database Administrator

Science.gov (United States)

Moore, Pam

2010-01-01

The Internet and electronic commerce (e-commerce) generate lots of data. Data must be stored, organized, and managed. Database administrators, or DBAs, work with database software to find ways to do this. They identify user needs, set up computer databases, and test systems. They ensure that systems perform as they should and add people to the…

Influence of Radiofrequency Electromagnetic Fields on the Fertility System: Protocol for a Systematic Review and Meta-Analysis.

Science.gov (United States)

Roozbeh, Nasibeh; Abdi, Fatemeh; Amraee, Azadeh; Atarodi Kashani, Zahra; Darvish, Leili

2018-02-08

Due to the increased number of users of mobile phones, tablets, and other devices over the past few years, concerns about the potential impact of mobile phones on health are growing. The influence of mobile phone exposure on male fertility has been studied in recent years. Other research has shown that electromagnetic fields (EMFs) increase macrophages in the corpus luteum and growing follicles. Due to conflicting results among studies and since no systematic review has been performed to analyze the effects of radiofrequency EMF exposure from electronic devices on the fertility system in recent years, this evidence-based study is necessary. The main objectives of this study are to determine the best evidence associated with the influence of radiofrequency EMFs on the fertility system and to provide insight into a potential mechanism using our observations. In this systematic review, the databases and gray literature will be searched with no language and date limitation. The following databases will be searched: Cochrane Library, MEDLINE, PubMed, EMBASE, CINAHL, ProQuest, Scopus, Science Direct, Google Scholar, and other Persian databases. The combination of the Medical Subject Heading terms "radiofrequency electromagnetic" and "male reproductive system" or "female reproductive system" will be searched. Observational study designs will be included but case reports, case series, reviews, and letters to the editor will be excluded. Papers selected for retrieval will be evaluated by two independent referees for methodological validation before entering a review using the Newcastle-Ottawa Scale for nonrandomized studies and cohort studies. The results of this study will be submitted to a peer-reviewed journal for publication and also presented at PROSPERO. This systematic review will provide evidence-based data on the effect of radiofrequency EMFs on the fertility system. This article will also classify the harmful effect of radiofrequency waves on primary and

Radiation-electromagnetic effect in germanium single crystals

International Nuclear Information System (INIS)

Kikoin, I.K.; Kikoin, L.I.; Lazarev, S.D.

1980-01-01

An experimental study was made of the radiation-electromagnetic effect in germanium single crystals when excess carriers were generated by bombardment with α particles, protons, or x rays in magnetic fields up to 8 kOe. The source of α particles and protons was a cyclotron and x rays were provided by a tube with a copper anode. The radiation-electromagnetic emf increased linearly on increase in the magnetic field and was directly proportional to the flux of charged particles at low values of the flux, reaching saturation at high values of the flux (approx.5 x 10 11 particles .cm -2 .sec -1 ). In the energy range 4--40 MeV the emf was practically independent of the α-particle energy. The sign of the emf was reversed when samples with a ground front surface were irradiated. Measurements of the photoelectromagnetic and Hall effects in the α-particle-irradiated samples showed that a p-n junction was produced by these particles and its presence should be allowed for in investigations of the radiation-electromagnetic effect. The measured even radiation-electromagnetic emf increased quadratically on increase in the magnetic field. An investigation was made of the barrier radiation-voltaic effect (when the emf was measured between the irradiated and unirradiated surfaces). Special masks were used to produce a set of consecutive p-n junctions in germanium crystals irradiated with α particles. A study of the photovoltaic and photoelectromagnetic effects in such samples showed that the method could be used to increase the efficiency of devices utilizing the photoelectromagnetic effect

Database Description - TMFunction | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available sidue (or mutant) in a protein. The experimental data are collected from the literature both by searching th...the sequence database, UniProt, structural database, PDB, and literature database

PrimateLit Database

Science.gov (United States)

Primate Info Net Related Databases NCRR PrimateLit: A bibliographic database for primatology Top of any problems with this service. We welcome your feedback. The PrimateLit database is no longer being Resources, National Institutes of Health. The database is a collaborative project of the Wisconsin Primate

Measurement of thermal conducitivity of Cdsub(0,28) Hgsub(0.72)Te at hydrostatic pressure

International Nuclear Information System (INIS)

Amirkhanov, Kh.I.; Magomedov, Ya.B.; Emirov, S.N.; Gadzjieva, R.M.

1975-01-01

The article reports experimental data on the effect of hydrostatic pressures up to 3.3kbar on the thermal conductivity, electrical conductivity, and thermo-emf of the solid solution Cdsub(0.28)Hgsub(0.72)Te in the temperature range 300-450 0 K. An increase in thermal conductivity and thermo-emf and a decrease in electrical conductivity with pressure were observed. The increase in thermal conductivity is attributed to a rise in the phonon thermal conductivity, which is determined by the characteristic Debye temperature. The character of the temperature dependence of the phonon thermal conductivity changes with increase in pressure. Whereas at P=1 bar lamdasub(PHI) approximately CTsup(-0.93), which may be explained by the dominant influence of the changeover processes on the thermal resistivity, at P=3.3kbar lamdasub(PHI) approximately CTsup(-0.7), which is typical of a considerable contribution by phonon scattering at point defects at high-temperatures. The characteristic temperature increases under hydrostatic pressure, and this leads to a rise in the phonon thermal conductivity and to a reduction in the intensity of the changeover processes. The change in electrical conductivity and thermo-emf is attributed to the effect of pressure on the band structure

Constructing a Geology Ontology Using a Relational Database

Science.gov (United States)

Hou, W.; Yang, L.; Yin, S.; Ye, J.; Clarke, K.

2013-12-01

In geology community, the creation of a common geology ontology has become a useful means to solve problems of data integration, knowledge transformation and the interoperation of multi-source, heterogeneous and multiple scale geological data. Currently, human-computer interaction methods and relational database-based methods are the primary ontology construction methods. Some human-computer interaction methods such as the Geo-rule based method, the ontology life cycle method and the module design method have been proposed for applied geological ontologies. Essentially, the relational database-based method is a reverse engineering of abstracted semantic information from an existing database. The key is to construct rules for the transformation of database entities into the ontology. Relative to the human-computer interaction method, relational database-based methods can use existing resources and the stated semantic relationships among geological entities. However, two problems challenge the development and application. One is the transformation of multiple inheritances and nested relationships and their representation in an ontology. The other is that most of these methods do not measure the semantic retention of the transformation process. In this study, we focused on constructing a rule set to convert the semantics in a geological database into a geological ontology. According to the relational schema of a geological database, a conversion approach is presented to convert a geological spatial database to an OWL-based geological ontology, which is based on identifying semantics such as entities, relationships, inheritance relationships, nested relationships and cluster relationships. The semantic integrity of the transformation was verified using an inverse mapping process. In a geological ontology, an inheritance and union operations between superclass and subclass were used to present the nested relationship in a geochronology and the multiple inheritances

License - Yeast Interacting Proteins Database | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available List Contact us Yeast Interacting Proteins Database License to Use This Database Last updated : 2010/02/15 You may use this database...nal License described below. The Standard License specifies the license terms regarding the use of this database... and the requirements you must follow in using this database. The Additional ...the Standard License. Standard License The Standard License for this database is the license specified in th...e Creative Commons Attribution-Share Alike 2.1 Japan . If you use data from this database

Wavelet optimization for content-based image retrieval in medical databases.

Science.gov (United States)

Quellec, G; Lamard, M; Cazuguel, G; Cochener, B; Roux, C

2010-04-01

We propose in this article a content-based image retrieval (CBIR) method for diagnosis aid in medical fields. In the proposed system, images are indexed in a generic fashion, without extracting domain-specific features: a signature is built for each image from its wavelet transform. These image signatures characterize the distribution of wavelet coefficients in each subband of the decomposition. A distance measure is then defined to compare two image signatures and thus retrieve the most similar images in a database when a query image is submitted by a physician. To retrieve relevant images from a medical database, the signatures and the distance measure must be related to the medical interpretation of images. As a consequence, we introduce several degrees of freedom in the system so that it can be tuned to any pathology and image modality. In particular, we propose to adapt the wavelet basis, within the lifting scheme framework, and to use a custom decomposition scheme. Weights are also introduced between subbands. All these parameters are tuned by an optimization procedure, using the medical grading of each image in the database to define a performance measure. The system is assessed on two medical image databases: one for diabetic retinopathy follow up and one for screening mammography, as well as a general purpose database. Results are promising: a mean precision of 56.50%, 70.91% and 96.10% is achieved for these three databases, when five images are returned by the system. Copyright 2009 Elsevier B.V. All rights reserved.

NoSQL technologies for the CMS Conditions Database

CERN Document Server

Sipos, Roland

2015-01-01

With the restart of the LHC in 2015, the growth of the CMS Conditions dataset will continue, therefore the need of consistent and highly available access to the Conditions makes a great cause to revisit different aspects of the current data storage solutions.We present a study of alternative data storage backends for the Conditions Databases, by evaluating some of the most popular NoSQL databases to support a key-value representation of the CMS Conditions. An important detail about the Conditions that the payloads are stored as BLOBs, and they can reach sizes that may require special treatment (splitting) in these NoSQL databases. As big binary objects may be a bottleneck in several database systems, and also to give an accurate baseline, a testing framework extension was implemented to measure the characteristics of the handling of arbitrary binary data in these databases. Based on the evaluation, prototypes of a document store, using a column-oriented and plain key-value store, are deployed. An adaption l...

NoSQL database scaling

OpenAIRE

Žardin, Norbert

2017-01-01

NoSQL database scaling is a decision, where system resources or financial expenses are traded for database performance or other benefits. By scaling a database, database performance and resource usage might increase or decrease, such changes might have a negative impact on an application that uses the database. In this work it is analyzed how database scaling affect database resource usage and performance. As a results, calculations are acquired, using which database scaling types and differe...

Database on wind characteristics - Structure and philosophy

Energy Technology Data Exchange (ETDEWEB)

Larsen, G.C.; Hansen, K.S.

2001-11-01

The main objective of IEA R and D Wind Annex XVII - Database on Wind Characteristics - is to provide wind energy planners and designers, as well as the international wind engineering community in general, with easy access to quality controlled measured wind field time series observed in a wide range of environments. The project partners are Sweden, Norway, U.S.A., The Netherlands, Japan and Denmark, with Denmark as the Operating Agent. The reporting of IEA R and D Annex XVII falls in three separate parts. Part one deals with the overall structure and philosophy behind the database, part two accounts in details for the available data in the established database bank and part three is the Users Manual describing the various ways to access and analyse the data. The present report constitutes the first part of the Annex XVII reporting, and it contains a detailed description of the database structure, the data quality control procedures, the selected indexing of the data and the hardware system. (au)

Database implementation to fluidized cracking catalytic-FCC process

International Nuclear Information System (INIS)

Santana, Antonio Otavio de; Dantas, Carlos Costa; Santos, Valdemir A. dos

2009-01-01

A process of Fluidized Cracking Catalytic (FCC) was developed by our research group. A cold model FCC unit, in laboratory scale, was used for obtaining of the data relative to the following parameters: air flow, system pressure, riser inlet pressure, rise outlet pressure, pressure drop in the riser, motor speed of catalyst injection and density. The measured of the density is made by gamma ray transmission. For the fact of the process of FCC not to have a database until then, the present work supplied this deficiency with the implementation of a database in connection with the Matlab software. The data from the FCC unit (laboratory model) are obtained as spreadsheet of the MS-Excel software. These spreadsheets were treated before importing them as database tables. The application of the process of normalization of database and the analysis done with the MS-Access in these spreadsheets treated revealed the need of an only relation (table) for to represent the database. The Database Manager System (DBMS) chosen has been the MS-Access by to satisfy our flow of data. The next step was the creation of the database, being built the table of data, the action query, selection query and the macro for to import data from the unit FCC in study. Also an interface between the application 'Database Toolbox' (Matlab2008a) and the database was created. This was obtained through the drivers ODBC (Open Data Base Connectivity). This interface allows the manipulation of the database by the users operating in the Matlab. (author)

Database implementation to fluidized cracking catalytic-FCC process

Energy Technology Data Exchange (ETDEWEB)

Santana, Antonio Otavio de; Dantas, Carlos Costa, E-mail: aos@ufpe.b [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil). Dept. de Energia Nuclear; Santos, Valdemir A. dos, E-mail: valdemir.alexandre@pq.cnpq.b [Universidade Catolica de Pernambuco, Recife, PE (Brazil). Centro de Ciencia e Tecnologia

2009-07-01

A process of Fluidized Cracking Catalytic (FCC) was developed by our research group. A cold model FCC unit, in laboratory scale, was used for obtaining of the data relative to the following parameters: air flow, system pressure, riser inlet pressure, rise outlet pressure, pressure drop in the riser, motor speed of catalyst injection and density. The measured of the density is made by gamma ray transmission. For the fact of the process of FCC not to have a database until then, the present work supplied this deficiency with the implementation of a database in connection with the Matlab software. The data from the FCC unit (laboratory model) are obtained as spreadsheet of the MS-Excel software. These spreadsheets were treated before importing them as database tables. The application of the process of normalization of database and the analysis done with the MS-Access in these spreadsheets treated revealed the need of an only relation (table) for to represent the database. The Database Manager System (DBMS) chosen has been the MS-Access by to satisfy our flow of data. The next step was the creation of the database, being built the table of data, the action query, selection query and the macro for to import data from the unit FCC in study. Also an interface between the application 'Database Toolbox' (Matlab2008a) and the database was created. This was obtained through the drivers ODBC (Open Data Base Connectivity). This interface allows the manipulation of the database by the users operating in the Matlab. (author)

The Danish Cardiac Rehabilitation Database.

Science.gov (United States)

Zwisler, Ann-Dorthe; Rossau, Henriette Knold; Nakano, Anne; Foghmar, Sussie; Eichhorst, Regina; Prescott, Eva; Cerqueira, Charlotte; Soja, Anne Merete Boas; Gislason, Gunnar H; Larsen, Mogens Lytken; Andersen, Ulla Overgaard; Gustafsson, Ida; Thomsen, Kristian K; Boye Hansen, Lene; Hammer, Signe; Viggers, Lone; Christensen, Bo; Kvist, Birgitte; Lindström Egholm, Cecilie; May, Ole

2016-01-01

The Danish Cardiac Rehabilitation Database (DHRD) aims to improve the quality of cardiac rehabilitation (CR) to the benefit of patients with coronary heart disease (CHD). Hospitalized patients with CHD with stenosis on coronary angiography treated with percutaneous coronary intervention, coronary artery bypass grafting, or medication alone. Reporting is mandatory for all hospitals in Denmark delivering CR. The database was initially implemented in 2013 and was fully running from August 14, 2015, thus comprising data at a patient level from the latter date onward. Patient-level data are registered by clinicians at the time of entry to CR directly into an online system with simultaneous linkage to other central patient registers. Follow-up data are entered after 6 months. The main variables collected are related to key outcome and performance indicators of CR: referral and adherence, lifestyle, patient-related outcome measures, risk factor control, and medication. Program-level online data are collected every third year. Based on administrative data, approximately 14,000 patients with CHD are hospitalized at 35 hospitals annually, with 75% receiving one or more outpatient rehabilitation services by 2015. The database has not yet been running for a full year, which explains the use of approximations. The DHRD is an online, national quality improvement database on CR, aimed at patients with CHD. Mandatory registration of data at both patient level as well as program level is done on the database. DHRD aims to systematically monitor the quality of CR over time, in order to improve the quality of CR throughout Denmark to benefit patients.

Global and Regional Ecosystem Modeling: Databases of Model Drivers and Validation Measurements

Energy Technology Data Exchange (ETDEWEB)

Olson, R.J.

2002-03-19

NPP for 0.5{sup o}-grid cells for which inventory, modeling, or remote-sensing tools were used to scale up the point measurements. Documentation of the content and organization of the EMDI databases are provided.

DataBase on Demand

International Nuclear Information System (INIS)

Aparicio, R Gaspar; Gomez, D; Wojcik, D; Coz, I Coterillo

2012-01-01

At CERN a number of key database applications are running on user-managed MySQL database services. The database on demand project was born out of an idea to provide the CERN user community with an environment to develop and run database services outside of the actual centralised Oracle based database services. The Database on Demand (DBoD) empowers the user to perform certain actions that had been traditionally done by database administrators, DBA's, providing an enterprise platform for database applications. It also allows the CERN user community to run different database engines, e.g. presently open community version of MySQL and single instance Oracle database server. This article describes a technology approach to face this challenge, a service level agreement, the SLA that the project provides, and an evolution of possible scenarios.

Molecular and Functional Characterization of Broccoli EMBRYONIC FLOWER 2 Genes

Science.gov (United States)

Chen, Long-Fang O.; Lin, Chun-Hung; Lai, Ying-Mi; Huang, Jia-Yuan; Sung, Zinmay Renee

2012-01-01

Polycomb group (PcG) proteins regulate major developmental processes in Arabidopsis. EMBRYONIC FLOWER 2 (EMF2), the VEFS domain-containing PcG gene, regulates diverse genetic pathways and is required for vegetative development and plant survival. Despite widespread EMF2-like sequences in plants, little is known about their function other than in Arabidopsis and rice. To study the role of EMF2 in broccoli (Brassica oleracea var. italica cv. Elegance) development, we identified two broccoli EMF2 (BoEMF2) genes with sequence homology to and a similar gene expression pattern to that in Arabidopsis (AtEMF2). Reducing their expression in broccoli resulted in aberrant phenotypes and gene expression patterns. BoEMF2 regulates genes involved in diverse developmental and stress programs similar to AtEMF2 in Arabidopsis. However, BoEMF2 differs from AtEMF2 in the regulation of flower organ identity, cell proliferation and elongation, and death-related genes, which may explain the distinct phenotypes. The expression of BoEMF2.1 in the Arabidopsis emf2 mutant (Rescued emf2) partially rescued the mutant phenotype and restored the gene expression pattern to that of the wild type. Many EMF2-mediated molecular and developmental functions are conserved in broccoli and Arabidopsis. Furthermore, the restored gene expression pattern in Rescued emf2 provides insights into the molecular basis of PcG-mediated growth and development. PMID:22537758

Full Data of Yeast Interacting Proteins Database (Original Version) - Yeast Interacting Proteins Database | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available List Contact us Yeast Interacting Proteins Database Full Data of Yeast Interacting Proteins Database (Origin...al Version) Data detail Data name Full Data of Yeast Interacting Proteins Database (Original Version) DOI 10....18908/lsdba.nbdc00742-004 Description of data contents The entire data in the Yeast Interacting Proteins Database...eir interactions are required. Several sources including YPD (Yeast Proteome Database, Costanzo, M. C., Hoga...ematic name in the SGD (Saccharomyces Genome Database; http://www.yeastgenome.org /). Bait gene name The gen

Energy Consumption Database

Science.gov (United States)

Consumption Database The California Energy Commission has created this on-line database for informal reporting ) classifications. The database also provides easy downloading of energy consumption data into Microsoft Excel (XLSX

50-60 Hz electric and magnetic field effects on cognitive function in humans: A review

International Nuclear Information System (INIS)

Crasson, M.

2003-01-01

This paper reviews the effect of 50-60 Hz weak electric, magnetic and combined electric and magnetic field exposure on cognitive functions such as memory, attention, information processing and time perception, as determined by electroencephalographic methods and performance measures. Overall, laboratory studies, which have investigated the acute effects of power frequency fields on cognitive functioning in humans are heterogeneous, in terms of both electric and magnetic field (EMF) exposure and the experimental design and measures used. Results are inconsistent and difficult to interpret with regard to functional relevance for possible health risks. Statistically significant differences between field and control exposure, when they are found, are small, subtle, transitory, without any clear dose-response relationship and difficult to reproduce. The human performance or event related potentials (ERPs) measures that might specifically be affected by EMF exposure, as well as a possible cerebral structure or function that could be more sensitive to EMF, cannot be better determined. (author)

Using a Semi-Realistic Database to Support a Database Course

Science.gov (United States)

Yue, Kwok-Bun

2013-01-01

A common problem for university relational database courses is to construct effective databases for instructions and assignments. Highly simplified "toy" databases are easily available for teaching, learning, and practicing. However, they do not reflect the complexity and practical considerations that students encounter in real-world…

Evaluation of the National Solar Radiation Database (NSRDB) Using Ground-Based Measurements

Science.gov (United States)

Xie, Y.; Sengupta, M.; Habte, A.; Lopez, A.

2017-12-01

Solar resource is essential for a wide spectrum of applications including renewable energy, climate studies, and solar forecasting. Solar resource information can be obtained from ground-based measurement stations and/or from modeled data sets. While measurements provide data for the development and validation of solar resource models and other applications modeled data expands the ability to address the needs for increased accuracy and spatial and temporal resolution. The National Renewable Energy Laboratory (NREL) has developed and regular updates modeled solar resource through the National Solar Radiation Database (NSRDB). The recent NSRDB dataset was developed using the physics-based Physical Solar Model (PSM) and provides gridded solar irradiance (global horizontal irradiance (GHI), direct normal irradiance (DNI), and diffuse horizontal irradiance) at a 4-km by 4-km spatial and half-hourly temporal resolution covering 18 years from 1998-2015. A comprehensive validation of the performance of the NSRDB (1998-2015) was conducted to quantify the accuracy of the spatial and temporal variability of the solar radiation data. Further, the study assessed the ability of NSRDB (1998-2015) to accurately capture inter-annual variability, which is essential information for solar energy conversion projects and grid integration studies. Comparisons of the NSRDB (1998-2015) with nine selected ground-measured data were conducted under both clear- and cloudy-sky conditions. These locations provide a high quality data covering a variety of geographical locations and climates. The comparison of the NSRDB to the ground-based data demonstrated that biases were within +/- 5% for GHI and +/-10% for DNI. A comprehensive uncertainty estimation methodology was established to analyze the performance of the gridded NSRDB and includes all sources of uncertainty at various time-averaged periods, a method that is not often used in model evaluation. Further, the study analyzed the inter

Effects of 60 Hz electromagnetic fields on early growth in three plant species and a replication of previous results

Energy Technology Data Exchange (ETDEWEB)

Davis, M.S. [Univ. of Sunderland (United Kingdom). Ecology Centre

1996-05-01

In an attempt to replicate the findings of Smith et al., seeds of Raphanus sativus L. (radish), Sinapsis alba L. (mustard), and Hordeum vulgare L. (barley) were grown for between 9 and 21 days in continuous electromagnetic fields (EMFs) at ion-cyclotron resonance conditions for stimulation of Ca{sup 2+} (B{sub H} = 78.3 {micro}T, B{sub HAC} = 40 {micro}T peak-peak at 60 Hz, B{sub v} = 0). On harvesting, radish showed results similar to those of Smith et al. Dry stem weight and plant height were both significantly greater (Mann-Whitney tests, Ps < 0.05) in EMF-exposed plants than in control plants in each EMF experiment. Wet root weight was significantly greater in EMF-exposed plants in two out of three experiments, as were dry leaf weight, dry whole weight, and stem diameter. Dry root weight, wet leaf weight, and wet whole weight were significantly greater in EMF-exposed plants in one of three experiments. All significant differences indicated an increase in weight or size in the EMF-exposed plants. In each of the sham experiments, no differences between exposed and control plants were evident. Mustard plants failed to respond to the EMFs in any of the plant parameters measured. In one experiment, barley similarly failed to respond; but in another showed significantly greater wet root weight and significantly smaller stem diameter and dry seed weight at the end of the experiment in exposed plants compared to control plants. Although these results give no clue about the underlying bioelectromagnetic mechanism, they demonstrate that, at least for one EMF-sensitive biosystem, results can be independently replicated in another laboratory. Such replication is crucial in establishing the validity of bioelectromagnetic science.

Description of geological data in SKBs database GEOTAB

International Nuclear Information System (INIS)

Stark, T.

1988-01-01

Measurements for the characterization of geological, geophysical, hydrogeological and hydrochemical condition have been performed since 1977 in specific site investigation as well as for geoscientific projects. The database comprises four main groups of data volumes. These are: geological data, geophysical data, hydrogeological data, and hydrochemical data. In the database, background information from the investigations and results are stored on-line on the VAX 750, while raw data are either stored on-line or on magnetic tapes. This report deals with geological data and describes the dataflow from the measurements at the sites to the result tables in the database. All of the geological investigations were carried out by the Swedish Geological Survey, and since July 1982 by Swedish Geological Co, SGAB. The geological investigations have been divided into three categories, and each category is stored separately in the database. The are: surface factures, core mapping, and chemical analyses. At SGU/SGAB the geological data were stored on-line on-line on a PRIME 750 mini computer, on microcomputer floppy disks or in filed paper protocols. During 1987 the data files were transferred from SGAB to datafiles on the VAX computer. In the report the data flow of each of the three geological information categories are described separately. (L.E.)

Adaptive estimation of the electromotive force of the lithium-ion battery after current interruption for an accurate state-of-charge and capacity determination

International Nuclear Information System (INIS)

Waag, Wladislaw; Sauer, Dirk Uwe

2013-01-01

Highlights: • New adaptive approach for the EMF estimation. • The EMF is estimated by observing the voltage change after the current interruption. • The approach enables an accurate SoC and capacity determination. • Real-time capable algorithm. - Abstract: The online estimation of battery states and parameters is one of the challenging tasks when battery is used as a part of the pure electric or hybrid energy system. For the determination of the available energy stored in the battery, the knowledge of the present state-of-charge (SOC) and capacity of the battery is required. For SOC and capacity determination often the estimation of the battery electromotive force (EMF) is employed. The electromotive force can be measured as an open circuit voltage (OCV) of the battery when a significant time has elapsed since the current interruption. This time may take up to some hours for lithium-ion batteries and is needed to eliminate the influence of the diffusion overvoltages. This paper proposes a new approach to estimate the EMF by considering the OCV relaxation process within only some first minutes after the current interruption. The approach is based on an online fitting of an OCV relaxation model to the measured OCV relaxation curve. This model is based on an equivalent circuit consisting of a voltage source (represents the EMF) in series with the parallel connection of the resistance and a constant phase element (CPE). Based on this fitting the model parameters are determined and the EMF is estimated. The application of this method is exemplarily demonstrated for the state-of-charge and capacity estimation of the lithium-ion battery in an electrical vehicle. In the presented example the battery capacity is determined with the maximal inaccuracy of 2% using the EMF estimated at two different levels of state-of-charge. The real-time capability of the proposed algorithm is proven by its implementation on a low-cost 16-bit microcontroller (Infineon XC2287)

The electrical and thermal properties of sodium sulfate mixed with lithium sulfate, yttrium sulfate, and silicon dioxide

International Nuclear Information System (INIS)

Imanaka, N.; Yamaguchi, Y.; Adachi, G.; Shiokawa, J.

1986-01-01

Sodium sulfate mixed with lithium sulfate, yttrium sulfate, and silicon dioxide was prepared. The thermal and electrical properties of its phases were investigated. The Na 2 SO 4 -Li 2 SO 4 -Y 2 (SO 4 ) 3 SiO 2 samples are similar to the Na 2 SO 4 -I phase (a high temperature phase), which is appreciably effective for Na + ionic conduction. Phase transformation was considerably suppressed by mixing. Electromotive force (EMF) was measured, using Na 2 SO 4 -Li 2 SO 4 -Y 2 (SO 4 ) 3 -SiO 2 as a solid electrolyte, by constructing an SO 2 gas concentration cell. The measured EMF's at 823 and 773 K were in fairly good accordance with the calculated EMF's for inlet SO 2 gas concentration between 30 ppm and 1%, and 500 ppm and 0.5% respectively

Fire test database

International Nuclear Information System (INIS)

Lee, J.A.

1989-01-01

This paper describes a project recently completed for EPRI by Impell. The purpose of the project was to develop a reference database of fire tests performed on non-typical fire rated assemblies. The database is designed for use by utility fire protection engineers to locate test reports for power plant fire rated assemblies. As utilities prepare to respond to Information Notice 88-04, the database will identify utilities, vendors or manufacturers who have specific fire test data. The database contains fire test report summaries for 729 tested configurations. For each summary, a contact is identified from whom a copy of the complete fire test report can be obtained. Five types of configurations are included: doors, dampers, seals, wraps and walls. The database is computerized. One version for IBM; one for Mac. Each database is accessed through user-friendly software which allows adding, deleting, browsing, etc. through the database. There are five major database files. One each for the five types of tested configurations. The contents of each provides significant information regarding the test method and the physical attributes of the tested configuration. 3 figs

Mars Global Digital Dune Database; MC-1

Science.gov (United States)

Hayward, R.K.; Fenton, L.K.; Tanaka, K.L.; Titus, T.N.; Colaprete, A.; Christensen, P.R.

2010-01-01

The Mars Global Digital Dune Database presents data and describes the methodology used in creating the global database of moderate- to large-size dune fields on Mars. The database is being released in a series of U.S. Geological Survey (USGS) Open-File Reports. The first release (Hayward and others, 2007) included dune fields from 65 degrees N to 65 degrees S (http://pubs.usgs.gov/of/2007/1158/). The current release encompasses ~ 845,000 km2 of mapped dune fields from 65 degrees N to 90 degrees N latitude. Dune fields between 65 degrees S and 90 degrees S will be released in a future USGS Open-File Report. Although we have attempted to include all dune fields, some have likely been excluded for two reasons: (1) incomplete THEMIS IR (daytime) coverage may have caused us to exclude some moderate- to large-size dune fields or (2) resolution of THEMIS IR coverage (100m/pixel) certainly caused us to exclude smaller dune fields. The smallest dune fields in the database are ~ 1 km2 in area. While the moderate to large dune fields are likely to constitute the largest compilation of sediment on the planet, smaller stores of sediment of dunes are likely to be found elsewhere via higher resolution data. Thus, it should be noted that our database excludes all small dune fields and some moderate to large dune fields as well. Therefore, the absence of mapped dune fields does not mean that such dune fields do not exist and is not intended to imply a lack of saltating sand in other areas. Where availability and quality of THEMIS visible (VIS), Mars Orbiter Camera narrow angle (MOC NA), or Mars Reconnaissance Orbiter (MRO) Context Camera (CTX) images allowed, we classified dunes and included some dune slipface measurements, which were derived from gross dune morphology and represent the prevailing wind direction at the last time of significant dune modification. It was beyond the scope of this report to look at the detail needed to discern subtle dune modification. It was also

Databases and their application

NARCIS (Netherlands)

Grimm, E.C.; Bradshaw, R.H.W; Brewer, S.; Flantua, S.; Giesecke, T.; Lézine, A.M.; Takahara, H.; Williams, J.W.,Jr; Elias, S.A.; Mock, C.J.

2013-01-01

During the past 20 years, several pollen database cooperatives have been established. These databases are now constituent databases of the Neotoma Paleoecology Database, a public domain, multiproxy, relational database designed for Quaternary-Pliocene fossil data and modern surface samples. The

Comparison of radiofrequency electromagnetic field exposure levels in different everyday microenvironments in an international context.

Science.gov (United States)

Sagar, Sanjay; Adem, Seid M; Struchen, Benjamin; Loughran, Sarah P; Brunjes, Michael E; Arangua, Lisa; Dalvie, Mohamed Aqiel; Croft, Rodney J; Jerrett, Michael; Moskowitz, Joel M; Kuo, Tony; Röösli, Martin

2018-05-01

The aim of this study was to quantify RF-EMF exposure applying a tested protocol of RF-EMF exposure measurements using portable devices with a high sampling rate in different microenvironments of Switzerland, Ethiopia, Nepal, South Africa, Australia and the United States of America. We used portable measurement devices for assessing RF-EMF exposure in 94 outdoor microenvironments and 18 public transport vehicles. The measurements were taken either by walking with a backpack with the devices at the height of the head and a distance of 20-30 cm from the body, or driving a car with the devices mounted on its roof, which was 170-180 cm above the ground. The measurements were taken for about 30 min while walking and about 15-20 min while driving in each microenvironment, with a sampling rate of once every 4 s (ExpoM-RF) and 5 s (EME Spy 201). Mean total RF-EMF exposure in various outdoor microenvironments varied between 0.23 V/m (non-central residential area in Switzerland) and 1.85 V/m (university area in Australia), and across modes of public transport between 0.32 V/m (bus in rural area in Switzerland) and 0.86 V/m (Auto rickshaw in urban area in Nepal). For most outdoor areas the major exposure contribution was from mobile phone base stations. Otherwise broadcasting was dominant. Uplink from mobile phone handsets was generally very small, except in Swiss trains and some Swiss buses. This study demonstrates high RF-EMF variability between the 94 selected microenvironments from all over the world. Exposure levels tended to increase with increasing urbanity. In most microenvironments downlink from mobile phone base stations is the most relevant contributor. Copyright © 2018 Elsevier Ltd. All rights reserved.

The Development of a Benchmark Tool for NoSQL Databases

Directory of Open Access Journals (Sweden)

Ion LUNGU

2013-07-01

Full Text Available The aim of this article is to describe a proposed benchmark methodology and software application targeted at measuring the performance of both SQL and NoSQL databases. These represent the results obtained during PhD research (being actually a part of a larger application intended for NoSQL database management. A reason for aiming at this particular subject is the complete lack of benchmarking tools for NoSQL databases, except for YCBS [1] and a benchmark tool made specifically to compare Redis to RavenDB. While there are several well-known benchmarking systems for classical relational databases (starting with the canon TPC-C, TPC-E and TPC-H, on the other side of databases world such tools are mostly missing and seriously needed.

Database Optimizing Services

Directory of Open Access Journals (Sweden)

Adrian GHENCEA

2010-12-01

Full Text Available Almost every organization has at its centre a database. The database provides support for conducting different activities, whether it is production, sales and marketing or internal operations. Every day, a database is accessed for help in strategic decisions. The satisfaction therefore of such needs is entailed with a high quality security and availability. Those needs can be realised using a DBMS (Database Management System which is, in fact, software for a database. Technically speaking, it is software which uses a standard method of cataloguing, recovery, and running different data queries. DBMS manages the input data, organizes it, and provides ways of modifying or extracting the data by its users or other programs. Managing the database is an operation that requires periodical updates, optimizing and monitoring.

EXTRAPOLATION TECHNIQUES EVALUATING 24 HOURS OF AVERAGE ELECTROMAGNETIC FIELD EMITTED BY RADIO BASE STATION INSTALLATIONS: SPECTRUM ANALYZER MEASUREMENTS OF LTE AND UMTS SIGNALS.

Science.gov (United States)

Mossetti, Stefano; de Bartolo, Daniela; Veronese, Ivan; Cantone, Marie Claire; Cosenza, Cristina; Nava, Elisa

2017-04-01

International and national organizations have formulated guidelines establishing limits for occupational and residential electromagnetic field (EMF) exposure at high-frequency fields. Italian legislation fixed 20 V/m as a limit for public protection from exposure to EMFs in the frequency range 0.1 MHz-3 GHz and 6 V/m as a reference level. Recently, the law was changed and the reference level must now be evaluated as the 24-hour average value, instead of the previous highest 6 minutes in a day. The law refers to a technical guide (CEI 211-7/E published in 2013) for the extrapolation techniques that public authorities have to use when assessing exposure for compliance with limits. In this work, we present measurements carried out with a vectorial spectrum analyzer to identify technical critical aspects in these extrapolation techniques, when applied to UMTS and LTE signals. We focused also on finding a good balance between statistically significant values and logistic managements in control activity, as the signal trend in situ is not known. Measurements were repeated several times over several months and for different mobile companies. The outcome presented in this article allowed us to evaluate the reliability of the extrapolation results obtained and to have a starting point for defining operating procedures. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Update History of This Database - RED | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available switchLanguage; BLAST Search Image Search Home About Archive Update History Data ...List Contact us RED Update History of This Database Date Update contents 2015/12/21 Rice Expression Database English archi...s Database Database Description Download License Update History of This Database Site Policy | Contact Us Update History of This Database - RED | LSDB Archive ... ...ve site is opened. 2000/10/1 Rice Expression Database ( http://red.dna.affrc.go.jp/RED/ ) is opened. About Thi