WorldWideScience

Sample records for em silo vertical

  1. Armazenamento de soja em silos tipo bolsa Soybean storage in bag type silos

    Directory of Open Access Journals (Sweden)

    Lêda R. A. Faroni

    2009-03-01

    Full Text Available Avaliaram-se as principais alterações qualitativas de soja armazenada em silos tipo bolsa e do óleo bruto extraído de soja com teores de água de 17,4% e 13,3%, armazenada em dois silos tipo bolsa, por 180 dias. Realizaram-se amostragens no dia do enchimento das bolsas, aos 30; 90 e 180 dias de armazenamento. Analisaram-se o teor de água, a condutividade elétrica, o percentual de germinação, a massa específica aparente da soja, além do teor de ácidos graxos livres e o índice de peróxido do óleo bruto extraído dela. Os teores de água da soja armazenada úmida e seca mantiveram-se próximos dos valores obtidos no início do período de armazenamento. Observou-se tendência de elevação da condutividade elétrica e decréscimo do percentual de germinação somente na soja úmida, principalmente após 90 dias de armazenamento. Não foi verificado decréscimo da massa específica aparente do material armazenado úmido e seco. Com relação aos parâmetros qualitativos do óleo bruto, observou-se que os valores obtidos se mantiveram abaixo do limite máximo exigido pela legislação para a comercialização de óleo bruto de soja. Pode-se concluir que os silos tipo bolsa representam alternativa viável do ponto de vista qualitativo para armazenagem de soja, e esse tipo de estrutura não ocasiona alterações qualitativas significativas no óleo bruto obtido desse material, em condições similares àquelas deste estudo.This study reports major qualitative changes in the soybean grains and the extracted crude oil when stored in bag type silos. Grains with moisture content of 17.4 or 13.3% were stored in two bag type silos. Samples were taken 30, 90 and 180 days of storage , to determine moisture content, electric conductivity of the grain leachate, germination percentage, apparent specific grain mass, and free fatty acid content, and peroxide index of the crude oil extracted from these grains. The wet and dry grains remained with

  2. PRELIMINARY NOTE ON FODDER PLANT CONSERVATION IN TRENCH TYPE SILOS NOTAS PRELIMINARES SOBRE CONSERVAÇÃO DE FORRAGENS EM SILOS DO TIPO TRINCHEIRA

    Directory of Open Access Journals (Sweden)

    Anatoly Kravchenko

    2007-09-01

    Full Text Available

    This study has the objective of evaluating the quality of silage (Napier, 60%; sorghum, 30%; and sugar-cane, 10% conserved in trench-silos. The silos were built with side and back walls made of bricks, with no waterproof or revetment process. The floor was in direct contact with the soil, and the forage was distributed in 25cm-layers and compressed with the use of a tire tractor. The biggest losses, caused by ascetic and butyric fermentation, harmful to the cattle, took place close to the walls, due to a lack of compactness and a direct contact between the forage and the soil. The poor roof also allowed the penetration of water and other agents responsible for the formation of butyric acid. It was concluded that the waterproof process is the main factor in the desirable fermentation and conservation of the silage.

    Este trabalho tem como objetivo avaliar a qualidade da silagem - Napier (60%, sorgo (30% e cana (10% - conservada em silos tipo trincheira. Os silos foram construídos com paredes de tijolos nas laterais e no fundo, sem impermeabilização ou revestimento. O piso ficou em contato direto com o solo. A forragem foi distribuída em camadas de 25 cm e comprimida com trator de pneu. As perdas maiores, decorrentes das fermentações acética e butírica, prejudiciais ao rebanho, ocorreram junto às paredes, por falta de compactação e pelo contato direto da forragem com o solo. A má cobertura também favoreceu a penetração de água e os agentes formadores de ácido butírico. Concluiu-se que a impermeabilização é o fator principal para uma fermentação e conservação desejável da silagem.

    PALAVRAS-CHAVE: Silo; forragem; Sorgum; Penisetum.

  3. Composição bromatológica e perfil fermentativo da silagem de capim-elefante obtida em diferentes tipos de silos experimentais e no silo tipo trincheira Chemical composition and fermentation characteristics of elephantgrass silage obtained in different experimental and bunker silos

    Directory of Open Access Journals (Sweden)

    Paulo Henrique Mazza Rodrigues

    2002-11-01

    Full Text Available Três diferentes tipos de silos experimentais, confeccionados a partir de baldes plásticos, sacos plásticos e manilhas de concreto não impermeabilizadas, foram comparados com o silo comercial tipo trincheira, amostrado a 30 e 60 cm da sua superfície, para a ensilagem do capim-elefante (cv. Napier. Utilizaram-se, ainda, dois diferentes graus de compactação, correspondentes a 400 ou 600 kg de silagem/m³. O capim (33,0% de MS e 4,2% de PB foi homogeneizado e utilizado para encher quatro silos por tratamento, distribuídos em delineamento inteiramente casualizado. Depois de abertos, estes foram amostrados, para análise da composição bromatológica e do perfil fermentativo. Silagens produzidas em manilhas de concreto não impermeabilizadas apresentaram altos valores de pH, NIDA e lignina, baixas concentrações de ácido lático e nitrogênio amoniacal, baixo poder tampão e baixa digestibilidade in vitro. Silagens produzidas em silos experimentais apresentaram qualidade superior, quanto aos parâmetros amido, carboidratos solúveis, concentração de nitrogênio amoniacal, poder tampão, ácidos acético, propiônico, butírico e lático, do que aquelas produzidas no silo comercial. Silagens obtidas dos diferentes extratos do silo comercial apresentaram maior variabilidade para os parâmetros de fermentação do que aquelas obtidas entre diferentes tipos de silos experimentais.One type of commercial silo and three types of experimental silos were used for determination of chemical composition and fermentation characteristics of elephant grass (Pennisetum purpureum (33.0% DM and 4.2% CP ensiled in two different densities (400 or 600 kg of silage/m³: 1 commercial bunker silo sampled at 30 (top and 60 (deep cm from the top; 2 plastic silo with bulsen valve; 3 plastic bag; and 4 concrete pipe. A completely randomized design was used. The concrete pipe silo produced silage with higher pH, ADIN and lignin values, as well as lower in vitro

  4. Monitoring for vertical creep in concrete in two silos at Wivenhoe pumped storage hydro power station

    Energy Technology Data Exchange (ETDEWEB)

    Harris, M W [Queensland Univ. of Technology, Brisbane (Australia). School of Surveying

    1997-12-31

    The need for structural monitoring is generated by expected or unexpected (newly discovered in the life of the structure) behaviour. Due to the long vertical driveshafts involved at Wivenhoe the phenomenon of `concrete creep` which, if it is occurring, could contribute to shaft misalignment and unscheduled bearing wear or failure, was used as a motivation to establish a vertical monitoring system. The particular system developed for this site is traceable, replaceable, expandable and inexpensive. Measurements are obtained by precise levelling and the use of specially calibrated vertically suspended tapes. The analysis of the vertical loops is performed using constrained variance estimation and `robust` inter-epoch comparison. (orig.)

  5. Monitoring for vertical creep in concrete in two silos at Wivenhoe pumped storage hydro power station

    Energy Technology Data Exchange (ETDEWEB)

    Harris, M.W. [Queensland Univ. of Technology, Brisbane (Australia). School of Surveying

    1996-12-31

    The need for structural monitoring is generated by expected or unexpected (newly discovered in the life of the structure) behaviour. Due to the long vertical driveshafts involved at Wivenhoe the phenomenon of `concrete creep` which, if it is occurring, could contribute to shaft misalignment and unscheduled bearing wear or failure, was used as a motivation to establish a vertical monitoring system. The particular system developed for this site is traceable, replaceable, expandable and inexpensive. Measurements are obtained by precise levelling and the use of specially calibrated vertically suspended tapes. The analysis of the vertical loops is performed using constrained variance estimation and `robust` inter-epoch comparison. (orig.)

  6. RESFRIAMENTO ARTIFICIAL E USO DE TERRA DE DIATOMÁCEA PARA O CONTROLE DE INSETOS EM GRÃOS DE TRIGO ARMAZENADOS EM SILOS DE CONCRETO

    Directory of Open Access Journals (Sweden)

    Marcus Bochi da Silva Volk

    2009-01-01

    Full Text Available The objective of this study was to evaluate the effectiveness of artificial cooling associated with the use of diatomaceous earth to control insects in grains of wheat stored in concrete silos. We used two concrete silos, with a static capacity of 2.500 t (Silo A and the other with static capacity of 5.000 t (Silo B. The surface of the grain silos were treated with diatom earth with a commercial assay (1.0 kg / t of product. For the cooling of the grains, cold air was blown through the aeration system silos until the grains reach a temperature of 17 ° C between the layers. After cooling, it is the retention period of five months. The monitoring of insects in the Silo A was accomplished by collecting infested grain and / or insects with probes. In Silo B, the monitoring was done through the capture of insects with traps of the type calador. In The Silo, were not detected representative quantities of insects in grain up to 120 days, when the collections were made with probes in the layer below the grain treated with diatomaceous earth. In Silo B, where the collection of insects was performed with traps of the type calador, increased population of insects of the species O. surinamensis and R. dominica with the extension of storage. This increase in the number of insects was greater after 60 days of the early experiments. This is happening due to the presence of insects in grain mass before cooling. The use of cooling associated with the inert powder has an effective control of insects in grain mass.

  7. CHEMICAL COMPOSITION AND ENERGY ESTIMATION FROM ENSILED CASSAVA MASS WITH WHEAT MEAL IN EXPERIMENTAL SILOS CARACTERIZAÇÃO BROMATOLÓGICA E ESTIMATIVAS DE ENERGIA DA MASSA DE MANDIOCA ENSILADA COM FARELO DE TRIGO EM SILOS LABORATORIAIS

    Directory of Open Access Journals (Sweden)

    Elieldo Lameira Brito

    2007-09-01

    Full Text Available

    The experiment was conducted in order to evaluate the pH, chemical composition, fractions which constitute the total carbohydrates (CHT and energy values of cassava mass silage with wheat meal in PVC silos with capacity for 12 kg, randomly distributed in three replications. The samples had been taken at 0, 6, 18, 25, 45 and 60 days after ensilage. The dry matter (DM, ether extract (EE, crude protein (CP, neutral detergent fiber (NDF, acid detergent fiber (ADF, non-fiber carbohydrates (NFC, lignin contents and pH, CHT fraction and energy were analyzed. There was linear effect (P<0.05 for pH values, that decreased with the ensilage time, and positive quadratic effect (P<0.05 for DM concentration. The CP, EE, NDF, ADF, lignin, CHT texts of PB, EE, FDN, FDA, lignin, CHT, CNF, total fractions of CHT, total digestible nutrients and energy contents were  constant (P>0.05 in function of the ensilage time. In func-tion of the results, the cassava silage is showed as alternative source of energy concentrate for ruminants feeding.

    KEY-WORDS: Animal nutrition, byproducts, conservation, energy.

    Objetivou-se avaliar os valores de pH e a composi-ção bromatológica, quantificar as frações que constituem os carboidratos totais (CHT e estimar os valores energéticos da silagem da massa de mandioca enriquecida com 4% de farelo de trigo, em silos laboratoriais de PVC com capaci-dade para 12 kg, distribuídos ao acaso com três repetições por tratamento. As amostras foram tomadas aos 0, 6, 18, 25, 45 e 60 dias após a ensilagem. Analisaram-se os teores de matéria seca (MS, de extrato etéreo (EE, de proteína bruta (PB, de fibra em detergente neutro (FDN, de fibra em detergente ácido (FDA, de lignina, de valores de pH e estimativas da fração de CHT e de energia. Houve efeito linear (P<0,05 para os valores de pH, que decresceram com o tempo de ensilagem, e feito quadrático positivo (P<0,05 para os teores de MS. Os teores de PB, de EE, de

  8. Fernald Silo Remote Retrieval Tool Development

    International Nuclear Information System (INIS)

    Varma, V.K.

    2004-01-01

    A long-reach tool was developed to remove discrete objects from the silos at the Fernald Environmental Management Project in Ohio. If they are not removed, these objects can potentially cause problems during the retrieval and transfer of waste from the silos. Most of the objects are on top of the Bentogrout cap inside the silos at or near the primary opening into the tank and will therefore require only vertical lifting. The objects are located about 20 ft from the top of the silo. Although most of the objects can be retrieved from 20 ft, the long-reach tool was designed to for a reach up to 40 ft in case objects roll towards the walls of the tank or need to be removed during heel retrieval operations. This report provides a detailed description of the tool that was developed, tested, and demonstrated at the Tanks Technology Cold Test Facility at Oak Ridge National Laboratory. Scaffolding was erected over two experimental cells to simulate the 40-ft maximum working depth anticipated in the silos at Fernald. Plastic bottles and plastic sheeting simulated the debris that could be encountered during waste retrieval operations

  9. Modelagem e controle de cargas em movimento vertical

    OpenAIRE

    Terceiro, Georges Jean Bruel

    2004-01-01

    Dissertação (mestrado) - Universidade Federal de Santa Catarina, Centro Tecnológico. Programa de Pós-graduação em Engenharia Elétrica Vários são os aspectos envolvidos no processo de controle de movimento de veículos para deslocamento vertical que tornam o seu estudo interessante, sobretudo quando se trata de elevadores para transporte de pessoas, em que pesa sobremaneira o fato da existência de "cargas" vivas e conscientes. O controle do movimento de equipamentos elevadores é realizado a ...

  10. New frontier in silo technology

    Energy Technology Data Exchange (ETDEWEB)

    1923-01-01

    This paper reviews recent developments in the design of silo walls and discharge systems. The Eurosilo and Coal shell systems are described, briefly. The use of tapered concrete sidewalls in silo construction is discussed. The application of computer aided design to silo walls is considered.

  11. Software para cálculo de fluxo e pressões em silos cilíndricos metálicos para armazenamento de produtos agrícolas e industriais

    OpenAIRE

    Licia Carvalho Coelho

    2016-01-01

    Este trabalho apresenta o desenvolvimento e exemplos de aplicação de um software para cálculo de fluxo e pressões em silos cilíndricos metálicos de produtos agrícolas e industriais. As propriedades dos produtos a granel variam amplamente, e consequentemente suas pressões, tanto em grandeza e distribuição. Esses cálculos são importantes para prever picos de pressões imprevisíveis que podem causar sérios danos. O software está desenvolvido em linguagem Python com embasamento nas formulações do ...

  12. Nuevo silo – Austria

    Directory of Open Access Journals (Sweden)

    Schmidt, W.

    1971-11-01

    Full Text Available The firm Waagner-Biro, collaborating with Farbwerke Hoechst, AG., of Frankfurt, and with assistance from the Austrian Government, has designed and produced a new type of silo, made of steel, intended for use in underdeveloped countries, in emergency areas, and in any zone where silos are needed which can be rapidly assembled and taken down, are light in weight and easy to transport. These silos can contain solids, liquids, and, with a special external treatment, also aggressive chemicals for agricultural purposes.La firma Waagner-Biro, en colaboración con la Farbwerke Hoechst AG de Frankfurt y bajo la eficaz promoción del Gobierno austríaco, fabrica este moderno silo de acero-trevira destinado a cubrir las necesidades de países en vía de desarrollo, de zonas catastróficas y, en general, de cualquier lugar donde se requiera gran rapidez de montaje y desmontaje, poco peso propio y facilidad subsiguiente de transporte y celeridad de entrega. Puede contener productos sólidos y líquidos y, aplicándole un recubrimiento especial, incluso materias químicas biológicamente agresivas.

  13. Silo Storage Preconceptual Design

    Energy Technology Data Exchange (ETDEWEB)

    Stephanie L. Austad; Patrick W. Bragassa; Kevin M Croft; David S Ferguson; Scott C Gladson; Annette L Shafer; John H Weathersby

    2012-09-01

    The National Nuclear Security Administration (NNSA) has a need to develop and field a low-cost option for the long-term storage of a variety of radiological material. The storage option’s primary requirement is to provide both environmental and physical protection of the materials. Design criteria for this effort require a low initial cost and minimum maintenance over a 50-year design life. In 1999, Argonne National Laboratory-West was tasked with developing a dry silo storage option for the BN-350 Spent Fuel in Aktau Kazakhstan. Argon’s design consisted of a carbon steel cylinder approximately 16 ft long, 18 in. outside diameter and 0.375 in. wall thickness. The carbon steel silo was protected from corrosion by a duplex coating system consisting of zinc and epoxy. Although the study indicated that the duplex coating design would provide a design life well in excess of the required 50 years, the review board was concerned because of the novelty of the design and the lack of historical use. In 2012, NNSA tasked Idaho National Laboratory (INL) with reinvestigating the silo storage concept and development of alternative corrosion protection strategies. The 2012 study, “Silo Storage Concepts, Cathodic Protection Options Study” (INL/EST-12-26627), concludes that the option which best fits the design criterion is a passive cathotic protection scheme, consisting of a carbon steel tube coated with zinc or a zinc-aluminum alloy encapsulated in either concrete or a cement grout. The hot dipped zinc coating option was considered most efficient, but the flame-sprayed option could be used if a thicker zinc coating was determined to be necessary.

  14. Siloette, Siloe mock-up; Siloette, modele nucleaire de siloe

    Energy Technology Data Exchange (ETDEWEB)

    Delcroix, V; Jeanne, G; Mitault, G; Schulhof, P [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1964-07-01

    Siloette is the Siloe mock-up. The main installations are described: various tanks, building, auxiliaries, control systems... Precis ions are given about precautions taken for using spent fuel elements. (authors) [French] Siloette est le modele nucleaire de SILOE. On decrit ses diverses installations: bassins, batiments, auxiliaires, controle... Des precisions sont donnees sur les precautions prises pour y utiliser des elements uses. (auteurs)

  15. Investigation of the influence of wall stiffness on the stress ratio in mammoth silos

    NARCIS (Netherlands)

    van Leeuwenstijn, P.L.L.; van Leeuwenstijn, P.L.L.; van Wijk, L.A.; van Wijk, L.A.; Haaker, G.

    1994-01-01

    To calculate the stresses on the walls of silos, it is necessary to have a good estimate of the ratio of horizontal to vertical stress. This ratio however is not known precisely, especially in cases of static stress as found in a mammoth silo. In this paper the influence of the wall stiffness on the

  16. Siloette, Siloe mock-up

    International Nuclear Information System (INIS)

    Delcroix, V.; Jeanne, G.; Mitault, G.; Schulhof, P.

    1964-01-01

    Siloette is the Siloe mock-up. The main installations are described: various tanks, building, auxiliaries, control systems... Precis ions are given about precautions taken for using spent fuel elements. (authors) [fr

  17. temperature fluctuation inside inert atmosphere silos

    African Journals Online (AJOL)

    user

    significant difference in the mean temperature at different position or sections of the silos and as well between the two silos. ... environment since the constituents are present normally in ... fungi, thereby reducing the production of mycotoxins;.

  18. Avaliação da composição química de milho seco e armazenado em silo tipo alambrado com ar natural forçado Evaluation of chemical composition of corn dried and stored with forced natural air

    Directory of Open Access Journals (Sweden)

    Luiz Carlos Gutkoski

    2009-12-01

    Full Text Available O trabalho objetivou estudar o efeito da umidade de colheita e do tempo de armazenamento em grãos de milho secos e armazenados em silos com ar natural forçado. Grãos de milho colhidos com 17,8; 18,9 e 20,5% de água foram acondicionados em silos tipo alambrado com fundo falso perfurado e com ventiladores ligados ininterruptamente até a secagem. Amostras de milho foram coletadas nos tempos zero, 4, 8, 22 e 112 dias, em seis alturas de camada de cada silo (10, 60, 110, 160, 210 e 260 cm. A composição química foi determinada pelo uso de Espectrofotômetro do Infravermelho Proximal (NIR e os resultados expressos em porcentagem e em base seca. Os dados foram analisados estatisticamente (Anova e nas interações significativas, elaborados os gráficos de regressão. Nas determinações de proteínas, lipídios, matéria seca e fibra em detergente neutro as interações foram significativas ao nível de 5% de probabilidade de erro, enquanto que em cinzas, umidade e carboidratos não foram verificadas diferenças significativas. A aeração natural forçada é capaz de reduzir a umidade do milho para 13%, sendo tecnicamente viável em propriedades familiares.The aim of this work was to study the effects of moisture at harvest and time of storage upon grains of corn dried and stored in bins with forced natural air. Grains of corn harvested with 17.8; 18.9, and 20.5% of water were stored in drying bins with false floor with fans working full-time until drying. Samples of corn were collected at zero, 4, 8, 22, and 112 days from six different heights in each bin (10, 60, 110, 160, 210 and 260 cm. The chemical composition was determined through Near-Infrared Spectrophotometer (NIR and the results were expressed in percentage at dry basis. The data were statistically analyzed (Anova and for the significant interactions graphics of regression were provided. In the process of determination of protein, fat, dry matter, and neutral detergent fiber the

  19. Vertical Mulching e manejo da água em semeadura direta Vertical Mulching and water management in no tillage system

    Directory of Open Access Journals (Sweden)

    Sandra Maria Garcia

    2008-04-01

    Full Text Available A intensa mobilização do solo no sistema cultivo convencional causou degradação da estrutura, compactação e adensamento do solo abaixo da camada arável, reduzindo a macroporosidade e a taxa de infiltração de água no solo, com conseqüente aumento de escoamento superficial, de erosão e de assoreamento de rios e de reservatórios. A semeadura direta, que protege a superfície do solo, praticamente controlou a perda por erosão hídrica, os terraços foram eliminados, pelos agricultores, e a conseqüência foi maior escoamento superficial do que no sistema cultivo convencional. Com o objetivo de avaliar o comportamento hidrológico do vertical mulching em semeadura direta, em relação ao escoamento superficial, realizou-se esta pesquisa nos anos agrícolas 2002/2003 e 2003/2004, em Latossolo Vermelho distrófico típico, na região fisiográfica do planalto médio do Rio Grande do Sul, isto é, um experimento em escala de campo, com parcelas sem vertical mulching, com vertical mulching a cada 10 m e com vertical mulching a cada 5 m, no delineamento de blocos ao acaso com três repetições. Sulcos em nível, perpendiculares ao declive, com dimensões de 0,08 m de largura por x 0,38 m de profundidade, foram abertos e preenchidos com palha compactada o suficiente para prevenir desmoronamento das paredes do sulco. No ciclo da cultura da soja e do trigo foram simuladas chuvas com duas intensidades, 70 e 106 mm h-1. Foram determinados o escoamento superficial, a taxa de infiltração básica de água no solo e a concentração de nutrientes e de CO no escoamento superficial. Os resultados indicam que o vertical mulching na semeadura direta reduz, significativamente, o volume do escoamento superficial aumenta a taxa de infiltração básica de água no solo e reduz também as perdas totais de nutrientes e de CO devido ao menor volume de água no escoamento superficial.Intensive soil mobilization in the conventional tillage system has caused

  20. Silos. Optimisation of underground storages' management

    International Nuclear Information System (INIS)

    Formaggio, M.

    1997-01-01

    The operation of Silos in the optimization of storages' management at Snam is presented, together with an assessment of the benefits obtained through closer attention and higher commitment of the staff, as well as better communication between Dispatching and other organizational functions. Silos has proven to be a useful decision-making tool, while applying traditional risk-assessment methods. (au)

  1. temperature fluctuation inside inert atmosphere silos

    African Journals Online (AJOL)

    ... the two silos for twenty-eight (28) months of storage were recorded in order to monitor temperature fluctuation at different sections inside the inert atmosphere silos loaded with two varieties of wheat namely LACRIWHT-2 (Cettia) and LACRIWHT-4 (Atilla-Gan-Atilla) from Lake Chad Research Institute, Maiduguri, Nigeria.

  2. Characterization of Fernald Silo 3 Waste

    Energy Technology Data Exchange (ETDEWEB)

    Langton, C.A.

    2001-04-04

    This report summarizes characterization results for uranium residues from the Fernald Environmental Management Project (FEMP) Operable Unit (OU-4). These residues are currently stored in a one-million-gallon concrete silo, Silo 3, at the DOE Fernald Site, Ohio. Characterization of the Silo 3 waste is the first part of a three part study requested by Rocky Mountain Remedial Services (RMRS) through a Work for others Agreement, WFO-00-007, between the Westinghouse Savannah River Company (WSRC) and RMRS. Parts 2 and 3 of this effort include bench- and pilot-scale testing.

  3. The valuation of commercial grain silos

    African Journals Online (AJOL)

    The valuation of grain silos is a complex exercise when one considers all the variables that affect their ... their grains, larger grain-processing companies, traders, importers or exporters that have ..... 2015: personal interview). The percentages ...

  4. Statistical analysis of silo wall pressures

    DEFF Research Database (Denmark)

    Ditlevsen, Ove Dalager; Berntsen, Kasper Nikolaj

    1998-01-01

    Previously published silo wall pressure measurements during plug flow of barley in alarge concrete silo are re-analysed under the hypothesis that the wall pressures are gamma-distributed.The fits of the gamma distribution type to the local pressure data from each measuring cell are satisfactory.......However, the estimated parameters of the gamma distributions turn out to be significantly inhomogeneous overthe silo wall surface. This inhomogeneity is attributed to the geometrical imperfections of the silo wall.Motivated by the engineering importance of the problem a mathematical model for constructing astochastic...... gamma-type continuous pressure field is given. The model obeys the necessary equilibrium conditionsof the wall pressure field and reflects the spatial correlation properties as estimated from simultaneouslymeasured pressures at different locations along a horizontal perimeter....

  5. The four silo STK Powderhorn Tape Library

    CERN Multimedia

    Patrice Loïez

    2001-01-01

    A view of the four silo Storage Tek (STK) Powderhorn Tape Library and its control area. Each silo can contain up to 6000 storage slots with cartridges of 10, 20, 25 or 50 GB capacity, reaching a data transfer rate of up to 12 Mbytes/sec. This will form part of the Grid system that will process the huge amounts of data produced at the LHC.

  6. Design, construction and performance of the clay-based isolation of the SFR silo

    Energy Technology Data Exchange (ETDEWEB)

    Pusch, Roland [Geodevelopment AB, Lund (Sweden)

    2003-09-01

    The report describes the host rock performance, recording systems, silo movement, and performance of the wall filling and recording systems. Recommendations for future performance checking are given as well. The measurements of rock movements show that creep is very limited but that instantaneous block movements may have taken place soon after the excavation. Such movements may occur in future as a result of creep-induced stress accumulation, or generated by earthquakes. One cannot draw safe conclusions concerning the magnitude and direction of the vertical component of the strain of the cavern wall, which largely determines the accuracy of silo settlement recordings made by use of reference bolts anchored in the walls. However, it is reasonable to believe that the net movement is directed downwards and amounts at a couple of hundred micrometers to date. The initial settlement of the silo was somewhat faster than predicted while there is rather good agreement between actual and predicted settlement of the silo top for the period 1991 to 1997 when the waste loading rate was slightly below the assumed lower limit. From 1997 the annual waste loading rate dropped by about 50 % of this limit and gave a theoretical overestimation of the settlement by about 15 %. Considering the uncertainties and conservatism in selecting parameter values for the calculations it can be stated that the agreement between the predicted and actual subsidence of the silo top is acceptable. Major conclusions from the analysis are that the dominant part of the silo top settlement is caused by compression of the bottom bed and that this compression and the silo top subsidence are within the initially assumed ranges. The analysis can be taken as a basis of the design of the future top fill with respect to the desired continuity of the silo/top fill/rock system. The pressure of the wall fill on the silo and rock has reached a maximum value of 100 kPa, which equals the lower limit for highly

  7. Design, construction and performance of the clay-based isolation of the SFR silo

    International Nuclear Information System (INIS)

    Pusch, Roland

    2003-09-01

    The report describes the host rock performance, recording systems, silo movement, and performance of the wall filling and recording systems. Recommendations for future performance checking are given as well. The measurements of rock movements show that creep is very limited but that instantaneous block movements may have taken place soon after the excavation. Such movements may occur in future as a result of creep-induced stress accumulation, or generated by earthquakes. One cannot draw safe conclusions concerning the magnitude and direction of the vertical component of the strain of the cavern wall, which largely determines the accuracy of silo settlement recordings made by use of reference bolts anchored in the walls. However, it is reasonable to believe that the net movement is directed downwards and amounts at a couple of hundred micrometers to date. The initial settlement of the silo was somewhat faster than predicted while there is rather good agreement between actual and predicted settlement of the silo top for the period 1991 to 1997 when the waste loading rate was slightly below the assumed lower limit. From 1997 the annual waste loading rate dropped by about 50 % of this limit and gave a theoretical overestimation of the settlement by about 15 %. Considering the uncertainties and conservatism in selecting parameter values for the calculations it can be stated that the agreement between the predicted and actual subsidence of the silo top is acceptable. Major conclusions from the analysis are that the dominant part of the silo top settlement is caused by compression of the bottom bed and that this compression and the silo top subsidence are within the initially assumed ranges. The analysis can be taken as a basis of the design of the future top fill with respect to the desired continuity of the silo/top fill/rock system. The pressure of the wall fill on the silo and rock has reached a maximum value of 100 kPa, which equals the lower limit for highly

  8. Los empujes del material almacenado en silos

    Directory of Open Access Journals (Sweden)

    Ayuga, Francisco

    1995-04-01

    Full Text Available The design of silos has been the object of scientific and technical research for a whole century and this has led to great advances in the field. The results have not always been adequately disseminated among the technicians. The aim of this paper is to present the techniques for calculation of the loads of the materials stored in silos, inform about and comment on the standards, introduce the latest works carried out worldwide based on the finite elements method and, lastly, venture an opinion on the changes this may cause in the future.

    Durante un siglo el cálculo de silos ha sido objeto de investigación científica, técnica y aplicada y se han producido grandes avances. Todo este desarrollo no siempre ha sido bien dado a conocer entre los técnicos. El objeto de este artículo es precisamente presentar las técnicas de cálculo de acciones del material almacenado en silos, presentar y comentar la normativa, introducir los últimos trabajos que en el cálculo de silos se están haciendo en todo el mundo basados en la técnica de los elementos finitos y aventurar los cambios que esto va a suponer en un futuro.

  9. AIDS em gestantes: possibilidade de reduzir a transmissão vertical

    Directory of Open Access Journals (Sweden)

    Fernanda Scherer Wiethäuper

    2003-06-01

    Full Text Available Neste estudo, buscamos investigar o conhecimento que gestantes possuem sobre a transmissão vertical, o comprometimento do feto e o significado do resultado soropositivo que a identifica como infectada pelo HIV. A pesquisa exploratória, de natureza qualitativa, foi desenvolvida em Unidades Sanitárias de São Leopoldo/RS. A análise permitiu captar a percepção de 63 gestantes entre 16 e 40 anos sobre os motivos e os significados para realização do teste, os conhecimentos e vivências do cotidiano e as perspectivas e cuidados com o bebê. Os resultados trazem um alerta aos profissionais que atuam no pré-natal, visto que necessitam atender uma complexidade de situações que emergem quando se vincula gestação e AIDS.

  10. Stress distribution in two-dimensional silos

    Science.gov (United States)

    Blanco-Rodríguez, Rodolfo; Pérez-Ángel, Gabriel

    2018-01-01

    Simulations of a polydispersed two-dimensional silo were performed using molecular dynamics, with different numbers of grains reaching up to 64 000, verifying numerically the model derived by Janssen and also the main assumption that the walls carry part of the weight due to the static friction between grains with themselves and those with the silo's walls. We vary the friction coefficient, the radii dispersity, the silo width, and the size of grains. We find that the Janssen's model becomes less relevant as the the silo width increases since the behavior of the stresses becomes more hydrostatic. Likewise, we get the normal and tangential stress distribution on the walls evidencing the existence of points of maximum stress. We also obtained the stress matrix with which we observe zones of concentration of load, located always at a height around two thirds of the granular columns. Finally, we observe that the size of the grains affects the distribution of stresses, increasing the weight on the bottom and reducing the normal stress on the walls, as the grains are made smaller (for the same total mass of the granulate), giving again a more hydrostatic and therefore less Janssen-type behavior for the weight of the column.

  11. Application of electrostatic prevention technology on polyethylene silos

    International Nuclear Information System (INIS)

    Gong, Hong; Liu, Quanzhen; Tan, Fenggui; Zhang, Yunpeng

    2013-01-01

    The main reasons of static electric explosion accidents in polyolefin plant silos were analyzed in this paper, and the study finds that the reasons include control failure of flammable gas content in the feed, high electrification caused by the wind supply, and frequent electrostatic discharge in silos. The electrostatic-reducing technologies of polyolefin powder were introduced, and its application performance in polyolefin plant silos was also clarified. In addition, the methods including FDCS and DGES for evaluation of electrostatic explosion in polyolefin plant silo were proposed. In the end, the risk of electrostatic explosion in PE plant blended silo was evaluated before and after application of electrostatic reducing technology.

  12. Granular Silo collapse: an experimental study

    Science.gov (United States)

    Clement, Eric; Gutierriez, Gustavo; Boltenhagen, Philippe; Lanuza, Jose

    2008-03-01

    We present an experimental work that develop some basic insight into the pre-buckling behavior and the buckling transition toward plastic collapse of a granular silo. We study different patterns of deformation generated on thin paper cylindrical shells during granular discharge. We study the collapse threshold for different bed height, flow rates and grain sizes. We compare the patterns that appear during the discharge of spherical beads, with those obtained in the axially compressed cylindrical shells. When the height of the granular column is close to the collapse threshold, we describe a ladder like pattern that rises around the cylinder surface in a spiral path of diamond shaped localizations, and develops into a plastic collapsing fold that grows around the collapsing silo.

  13. Influence of particle size in silo discharge

    Directory of Open Access Journals (Sweden)

    Gella Diego

    2017-01-01

    Full Text Available Recently Janda et al. [Phys. Rev. Lett. 108, 248001 (2012] reported an experimental study where it was measured the velocity and volume fraction fields of 1 mm diameter stainless steel beads in the exit of a two-dimensional silo. In that work, they proposed a new expression to predict the flow of granular media in silos which does not explicitly include the particle size as a parameter. Here, we study if effectively, there is not such influence of the particle size in the flux equations as well as investigate any possible effect in the velocity and volume fraction fields. To this end, we have performed high speed motion measurements of these magnitudes in a two-dimensional silo filled with 4 mm diameter beads of stainless steel, the same material than the previous works. A developed tracking program has been implemented to obtain at the same time both, the velocity and volume fraction. The final objective of this work has been to extend and generalize the theoretical framework of Janda et al. for all sizes of particles. We have found that the obtained functionalities are the same than in the 1 mm case, but the exponents and other fitting parameters are different.

  14. Avaliação da vertical visual subjetiva em indivíduos brasileiros normais Subjective visual vertical evaluation in normal Brazilian subjects

    Directory of Open Access Journals (Sweden)

    Aline M. Kozoroski Kanashiro

    2007-06-01

    Full Text Available A função otolítica pode ser avaliada pela Vertical Visual Subjetiva (VVS que determina a capacidade de um indivíduo julgar se objetos estão na posição vertical na ausência de outras referências visuais. O objetivo deste estudo foi avaliar a VVS em indivíduos brasileiros normais usando um aparelho portátil. As medidas da VVS foram realizadas em 160 indivíduos (16 a 85 anos. O valor médio da VVS foi obtido após dez ajustes. A VVS teve valores médios entre -2,0º e +2,4º (média=0,18º, e DP=0,77º. Não houve diferença entre as médias da VVS em relação à idade (teste de Kruskal-Wallis; p=0,40, mas as faixas etárias maiores tiveram variância maior (teste de Levene; p=0,016. Os valores da VVS encontrados neste estudo foram semelhantes aos registrados na literatura. Não houve diferença nas médias das inclinações da VVS de acordo com a idade, mas foi encontrada maior variância entre indivíduos mais idosos.Otolith function can be evaluated by subjective visual vertical (SVV that determine the capacity of a subject to judge if the objects are on vertical position with absence of any visual reference. The aim of this study was to evaluate the SVV in a sample of normal Brazilian subjects using a portable device. Measurements of SVV were performed in 160 normal subjects (aged from 16 to 85. SVV mean value was obtained after ten adjustments. SVV mean values ranged from -2.0º to +2.4º (mean=0.18º, and SD=0.77. Considering all age groups, there was no difference of SVV mean values (Kruskal-Wallis test; p=0.40, but older groups had a greater variance (Levene test; p=0.016. SVV values observed in this study are comparable to those described in previous studies. Although there was no difference in mean SVV-inclination according to age, there was a greater variance in older subjects.

  15. SILOS, Reused Machine-Buildings: A Proposal for Its Transformation

    Science.gov (United States)

    Garrido-Cifuentes, María; Santiago-Zaragoza, Juan Manuel; Lafuente-Bolívar, Francisco Javier

    2017-10-01

    Second half of the 20th century: The Spanish rural landscape changes with the imposing profile of Silos. In the urban edge, next to the railroad, they are risen competing in height with church steeples. Today they are inseparable elements of the image of many peoples of cereal geography of any region of Spain. They are consequence of the autarkic economy of that time (storage of grain and state control over distribution and price) Silos were the answer given by the engineering efficiency and economy of means: A type of store operated by screw-conveyor moved with electricity, transport grain to fill high slender square plant cells. Hydraulic push offset between cells that form a matrix-walled plates constructed of thin sheets of brick or concrete block, armed only horizontally. And huge vertical loads carried by thick foundation reinforced concrete pillars. The political regime change and the energy crisis of the late seventies caused these magnificent building-machines stopped being used. Its radical specialization led them to death. After years of neglect and transfer of ownership between administrations, a consciousness has emerged in Spain (National Plan of Industrial Heritage, 2000) that has prevented its demolition, and recognize the values they bring to the landscape and structural-construction of its own, as beautiful works of Engineering which are worth cataloguing / protection. Hence this proposal tries to intervene these giants through new uses, transforming, allowing their conservation. This process investigates various structural types and implements strict standards of construction resolved with efficient construction solutions. The result is returned to society by publishing their work, while stressing heritage values, demonstrates the new strength of these local systems.

  16. Finite element analysis of CFRP reinforced silo structure design method

    Science.gov (United States)

    Yuan, Long; Xu, Xinsheng

    2017-11-01

    Because of poor construction, there is a serious problem of concrete quality in the silo project, which seriously affects the safe use of the structure. Concrete quality problems are mainly seen in three aspects: concrete strength cannot meet the design requirements, concrete cracking phenomenon is serious, and the unreasonable concrete vibration leads to a lot of honeycombs and surface voids. Silos are usually reinforced by carbon fiber cloth in order to ensure the safe use of silos. By the example of an alumina silo in a fly ash plant in Binzhou, Shandong Province, the alumina silo project was tested and examined on site. According to filed test results, the actual concrete strength was determined, and the damage causes of the silo was analysed. Then, a finite element analysis model of this silo was established, the CFRP cloth reinforcement method was adopted to strengthen the silo, and other technology like additional reinforcement, rebar planting, carbon fiber bonding technology was also expounded. The research of this paper is of great significance to the design and construction of silo structure.

  17. Proposta de medição da posição vertical da laringe em repouso Proposal of measurement of vertical larynx position at rest

    Directory of Open Access Journals (Sweden)

    Osiris de Oliveira Camponês do Brasil

    2005-06-01

    Full Text Available OBJETIVO: Esta pesquisa tem como objetivo propor uma forma de medir a posição vertical da laringe (PVL no pescoço, em repouso, de adultos jovens sem queixas vocais. FORMA DE ESTUDO: Estudo de coorte transversal. MATERIAL E MÉTODO: Participaram da pesquisa 68 sujeitos, faixa etária de 18 a 44 anos de idade, sendo 33 do sexo feminino e 35 do sexo masculino. Os pontos de referência utilizados para a pesquisa foram os ângulos da mandíbula direito e esquerdo (AMD e AME, o centro do arco da cartilagem cricóidea (CC e o centro da fúrcula esternal (FE. Para a obtenção das medidas, os sujeitos foram orientados a permanecerem sentados com a cabeça em hiperextensão máxima. Os materiais utilizados foram um compasso e uma régua de 20cm. RESULTADOS: A obtenção das medidas se mostrou ser de fácil realização e não apresentou qualquer tipo de desconforto aos participantes. Houve diferença estatisticamente significante entre os sexos feminino e masculino quanto à posição vertical da laringe, sendo que as mulheres apresentaram a laringe em posição mais alta que os homens. A posição vertical da laringe foi de fácil obtenção e parece ser um parâmetro muito interessante no acompanhamento clínico intra-sujeitos.AIM: The purpose of this research is to propose a procedure to measure the vertical larynx position in the neck at rest in young adults without vocal complaint. STUDY DESIGN: Transversal cohort study. MATERIAL AND METHOD: There were 68 subjects, aged between 18 to 44 years, 33 female and 35 male. The anatomical landmarks used for this research study were the right and left jaw angle (RJA and LJA, the centre of the cricoid arch cartilage (CC and the centre of the sternal furculum (SF. In order to obtain the measures, the subjects were asked to be sitting still with their heads stretched up to the highest possible position. The devices used were a drawing compass and a 20-centimeter ruler. RESULTS: The measurement procedure

  18. Press tour Siloe CEA/GRENOBLE; Voyage de presse Siloe CEA/GRENOBLE

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-04-01

    The experimental reactor, Siloe, has been stopped the 23 december 1997. This paper of the Cea Grenoble, presents the historical aspects of this reactor and its missions. It gives then a global description of the stopping and dismantling procedure, with the planning, the financing and the human impacts of the operation. The wastes management is also takes into account. (A.L.B.)

  19. Large-scale Homogenization of Bulk Materials in Mammoth Silos

    NARCIS (Netherlands)

    Schott, D.L.

    2004-01-01

    This doctoral thesis concerns the large-scale homogenization of bulk materials in mammoth silos. The objective of this research was to determine the best stacking and reclaiming method for homogenization in mammoth silos. For this purpose a simulation program was developed to estimate the

  20. Efficacy of heat treatment for disinfestation of concrete grain silos

    Science.gov (United States)

    Field experiments were conducted in 2007 and 2008 to evaluate heat treatment for disinfestations of empty concrete elevator silos. A Mobile Heat Treatment Unit was used to introduce heat into silos to attain target conditions of 50°C for at least 6 h. Ventilated plastic containers with a capacity of...

  1. CARACTERIZAÇÃO DE ARGAMASSAS PARA USO EM SISTEMAS DE VEDAÇÃO VERTICAL EXTERNO (SVVE

    Directory of Open Access Journals (Sweden)

    Vagner Arruda de Castro

    2011-03-01

    Full Text Available A Associação Brasileira de Normas Técnicas publicou em maio de 2010 uma nova norma de desempenho, a NBR 15.575, referente as edificações de até cinco pavimentos. Essa norma trará impactos importantes a fabricantes de materiais, projetistas, construtoras e prestadores de serviços, portanto os laboratórios de construção civil, como o LCC do IFRN, devem estar atentos a implicações destas normas, buscando gerar conhecimento a cerca dos aspectos nela envolvida, quanto para estarem aptos a avaliarem os materiais de construção e os sistemas construtivos empregados nas edificações abordadas na norma. Dentro deste contexto este artigo pretende caracterizar argamassas de revestimento para uso em sistema de vedação vertical externo (SVVE compostos de blocos cerâmicos, revestidos com argamassas em diferentes composições, visando propor inovações tecnológicas aplicados ao processo de produção de SVVE, objetivando a melhoria de desempenho, qualidade e custo dos SVVE. PALAVRAS-CHAVE: argamassa de revestimento, sistemas de vedação vertical externo, propriedades no estado fresco.

  2. Slip-stick excitation and travelling waves excite silo honking

    Directory of Open Access Journals (Sweden)

    Warburton Katarzyna

    2017-01-01

    Full Text Available Silo honking is the harmonic sound generated by the discharge of a silo filled with a granular material. In industrial storage silos, the acoustic emission during discharge of PET-particles forms a nuisance for the environment and may ultimately result in structural failure. This work investigates the phenomenon experimentally using a laboratory-scale silo, and successfully correlates the frequency of the emitted sound with the periodicity of the mechanical motion of the grains. The key driver is the slip-stick interaction between the wall and the particles, characterized as a wave moving upwards through the silo. A quantitative correlation is established for the first time between the frequency of the sound, measured with an electret microphone, and the slip-frequency, measured with a high-speed camera. In the lower regions of the tube, both the slip-stick motion and the honking sound disappear.

  3. Slip-stick excitation and travelling waves excite silo honking

    Science.gov (United States)

    Warburton, Katarzyna; Porte, Elze; Vriend, Nathalie

    2017-06-01

    Silo honking is the harmonic sound generated by the discharge of a silo filled with a granular material. In industrial storage silos, the acoustic emission during discharge of PET-particles forms a nuisance for the environment and may ultimately result in structural failure. This work investigates the phenomenon experimentally using a laboratory-scale silo, and successfully correlates the frequency of the emitted sound with the periodicity of the mechanical motion of the grains. The key driver is the slip-stick interaction between the wall and the particles, characterized as a wave moving upwards through the silo. A quantitative correlation is established for the first time between the frequency of the sound, measured with an electret microphone, and the slip-frequency, measured with a high-speed camera. In the lower regions of the tube, both the slip-stick motion and the honking sound disappear.

  4. Estudo comparativo de diferentes tipos de silos sobre a composição bromatológica e perfil fermentativo da silagem de milho Comparative studies on chemical composition and fermentation characteristics of corn silage

    Directory of Open Access Journals (Sweden)

    Laércio Melotti

    2002-04-01

    Full Text Available Três diferentes tipos de silos de laboratório, confeccionados a partir de baldes plásticos, sacos plásticos e manilhas de concreto com revestimento plástico, em dois diferentes graus de compactação (400 ou 600 kg de silagem/m3, foram comparados com o silo comercial tipo trincheira amostrado a 0, 50 e 100 cm da sua superfície. A planta de milho (27,3% de MS e 8,4% de PB foi picada, homogeneizada e utilizada para encher quatro silos por tratamento. Depois de abertos, estes foram amostrados para análise da composição bromatológica e perfil fermentativo. Os teores de MS e PB variaram entre os diferentes extratos do silo comercial e foram intermediários nos silos laboratoriais, indicando maior translocação de água e nutrientes naquele do que nestes. Os silos laboratoriais representaram bem os comerciais, quanto aos componentes da parede celular, amido, carboidratos solúveis e DIVMS. O pH foi menor na silagem obtida no extrato médio, intermediário no profundo e maior na superfície do silo comercial. Silagens obtidas no extrato médio também apresentaram maiores teores de nitrogênio amoniacal e ácido lático, enquanto que as obtidas no extrato profundo apresentaram as concentrações mais elevadas de ácido acético. De forma geral, os silos laboratoriais representaram bem o perfil de fermentação dos silos comerciais (pH, concentração de etanol, acético, propiônico, butírico, lático e N amoniacal, já que a maior variabilidade de resposta foi observada entre os extratos do silo comercialA commercial bunker silo and three types of experimental silos were used for determination of chemical composition and fermentation characteristics of corn silage (27.3% DM and 8.4% CP ensiled in two different densities (400 or 600kg of silage/m3: 1 commercial bunker silo sampled at 0, 50 and 100 cm from the top; 2 plastic silo with bulsen valve; 3 plastic bag; and 4 concrete pipe. Dry matter and CP concentration showed larger variation

  5. DIEL AND VERTICAL DYNAMIC OF LIMNOLOGICAL CHARACTERISTICS IN FISH REARING NET-CAGES ENVIROMENT DINÂMICA NICTIMERAL E VERTICAL DAS CARACTERÍSTICAS LIMNOLÓGICAS EM AMBIENTE DE CRIAÇÃO DE PEIXES EM TANQUES-REDE

    Directory of Open Access Journals (Sweden)

    Odair Diemer

    2010-04-01

    Full Text Available

    This study aimed to verify the diel and vertical dynamic characteristics in limnological environment for rearing native fish in net-cage at the reservoir of Itaipu Binacional. The parameters evaluated were water temperature, dissolved oxygen, electrical conductivity, pH, phosphorus, nitrite and ammonia. It was found that there was diel variation for all parameters, except for ammonia and phosphorus. But the variables are in the recommended limits for aquaculture, with the exception of dissolved oxygen that showed critical rates at night. For the vertical distribution concentrations of physical and chemical parameters of water did not exceed the limit established by CONAMA Resolution 357/05 for fish rearing, however, there was vertical variation for nitrite and phosphorus.

    KEY WORDS: Aquaculture, intensive culture, limnology, water quality.

    O presente trabalho teve como objetivo verificar a dinâmica nictimeral e vertical das características limnológicas em ambiente de criação de peixes nativos em tanques-rede no reservatório da Itaipu Binacional. Os parâmetros avaliados foram temperatura da água, oxigênio dissolvido, condutividade elétrica, pH, fósforo total, nitrito e amônia. Verificou-se que ocorreu variação nictimeral para todos os parâmetros, exceto para amônia e fósforo total. Entretanto, as variáveis estão dentro dos limites recomendados para a aquicultura, com exceção do oxigênio dissolvido, que apresentou valores críticos à noite. Para a distribuição vertical, as concentrações dos parâmetros físicos e químicos da água não ultrapassaram o limite estabelecido pela resolução do CONAMA 357/05 para criação de peixes. No entanto, houve variação vertical para nitrito e fósforo.

    PALAVRAS-CHAVES: Aquicultura, cultivo intensivo, limnologia, qualidade de água.

  6. An improved system to verify CANDU spent fuel elements in dry storage silos

    International Nuclear Information System (INIS)

    Almeida, Gevaldo L. de; Soares, Milton G.; Filho, Anizio M.; Martorelli, Daniel S.; Fonseca, Manoel

    2000-01-01

    An improved system to verify CANDU spent fuel elements stored in dry storage silos was developed. It is constituted by a mechanical device which moves a semi-conductor detector along a vertical verification pipe incorporated to the silo, and a modified portable multi-channel analyzer. The mechanical device contains a winding drum accommodating a cable hanging the detector, in such a way that the drum rotates as the detector goes down due to its own weight. The detector is coupled to the multi-channel analyzer operating in the multi-scaler mode, generating therefore a spectrum of total counts against time. To assure a linear transformation of time into detector position, the mechanical device dictating the detector speed is controlled by the multi-channel analyzer. This control is performed via a clock type escapement device activated by a solenoid. Whenever the multi-channel analyzer shifts to the next channel, the associated pulse is amplified, powering the solenoid causing the drum to rotate a fixed angle. Spectra taken in laboratory, using radioactive sources, have shown a good reproducibility. This qualify the system to be used as an equipment to get a fingerprint of the overall distribution of the fuel elements along the silo axis, and hence, to verify possible diversion of the nuclear material by comparing spectra taken at consecutive safeguards inspections. All the system is battery operated, being thus capable to operate in the field where no power supply is available. (author)

  7. An improved system to verify CANDU spent fuel elements in dry storage silos

    Energy Technology Data Exchange (ETDEWEB)

    Almeida, Gevaldo L. de; Soares, Milton G.; Filho, Anizio M.; Martorelli, Daniel S.; Fonseca, Manoel [Instituto de Engenharia Nuclear (IEN), Rio de Janeiro, RJ (Brazil)

    2000-07-01

    An improved system to verify CANDU spent fuel elements stored in dry storage silos was developed. It is constituted by a mechanical device which moves a semi-conductor detector along a vertical verification pipe incorporated to the silo, and a modified portable multi-channel analyzer. The mechanical device contains a winding drum accommodating a cable hanging the detector, in such a way that the drum rotates as the detector goes down due to its own weight. The detector is coupled to the multi-channel analyzer operating in the multi-scaler mode, generating therefore a spectrum of total counts against time. To assure a linear transformation of time into detector position, the mechanical device dictating the detector speed is controlled by the multi-channel analyzer. This control is performed via a clock type escapement device activated by a solenoid. Whenever the multi-channel analyzer shifts to the next channel, the associated pulse is amplified, powering the solenoid causing the drum to rotate a fixed angle. Spectra taken in laboratory, using radioactive sources, have shown a good reproducibility. This qualify the system to be used as an equipment to get a fingerprint of the overall distribution of the fuel elements along the silo axis, and hence, to verify possible diversion of the nuclear material by comparing spectra taken at consecutive safeguards inspections. All the system is battery operated, being thus capable to operate in the field where no power supply is available. (author)

  8. Carbon dioxide not suitable for extinguishment of smouldering silo fires: static electricity may cause silo explosion

    DEFF Research Database (Denmark)

    Hedlund, Frank Huess

    2018-01-01

    argues that injection of inert carbon dioxide into the silo headspace is unsafe. Carbon dioxide is generally available as a liquid under high pressure. When discharged, small particles of dry ice are formed. The rapid flow of particles can generate considerable amounts of static electricity, which can...... act as a source of ignition if ignitable pyrolysis gasses are present. This article discusses a serious wood pellet smouldering fire and silo explosion in Norway in 2010, which took place when firefighters discharged portable CO2 fire extinguishers into the headspace. The attempt to suppress the fire...... may have ignited pyrolysis gasses. The article examines selected guidelines, standards, popular wood pellet handbooks and other literature and argues that the electrostatic hazard is widely under-appreciated. In the past, major explosions have been attributed to electrostatic ignition of flammable...

  9. Solar grain drier associated with underground silo; Secador solar para graos associado a silo subterraneo

    Energy Technology Data Exchange (ETDEWEB)

    Braga, C.A.S.; Armond, G.; Oliveira, G.M. da; Correa, H.G.; Moreira, C.A.; Martins, F.P.

    1992-12-31

    This paper refers to the design and test of a system including a drier with solar heating and an underground silo for grain storage intend for small farms. The tests showed good performance of the system. Three tons of moist corn were dried. Drying time and area were reduced by 14 and 90% respectively when compared with the traditional drying on brick flat surfaces. (author) 8 refs., 11 figs., 3 tabs.

  10. SECAGEM DE SEMENTES DE SOJA EM SILO COM DISTRIBUIÇÃO RADIAL DO FLUXO DE AR: I. MONITORAMENTO FÍSICO DRYING OF SOYBEAN SEEDS IN A RADIAL AIR FLOW DRYER: I. PHYSICAL MONITORING

    Directory of Open Access Journals (Sweden)

    LUIZ CARLOS MIRANDA

    1999-11-01

    Full Text Available O trabalho foi desenvolvido com o objetivo de avaliar a evolução física do processo de remoção de água das sementes em secador estacionário, com cilindro central perfurado e distribuição radical de ar. A pesquisa foi conduzida com sementes de soja, variando o fluxo (26,9, 28,4 e 33,2 m³/minuto/t e a temperatura do ar insuflado (42, 46 e 50ºC, considerando a posição das sementes (17, 34 e 51 cm em relação ao cilindro de insuflação e o tempo de secagem (zero a doze horas, com intervalos de duas horas. Foram caracterizados o ar ambiente, o ar insuflado, as temperaturas e os teores de água da massa, as velocidades e curvas de secagem. As avaliações realizadas destacaram vantagens físicas operacionais da combinação de 28,4 m³/minuto/t com 46ºC e o contrário, com a combinação de 26,9 m³/minuto/t com 42ºC.The purpose of this research was to study several physical parameters of soybean seed drying submitted to stationary process with radial air distribution by combining different air flows (26.9, 28.4 and 33.2 m³/minute/ton and temperatures (42, 46 and 50ºC, considering seed positions in the seed mass (17, 34 and 51 cm in relation to the insuflation cylinder and drying periods (zero to twelve hours with two-hour intervals. Environmental air, insuflation air, seed temperatures, moisture content of seeds, drying speed and drying curves were characterized. Considering the evaluated parameters during the drying process, the physical advantages of the combination of 28.4 m³/minute/ton with 46ºC, and the desadvantage of the combination of 26.9 m³/minute/ton with 42ºC were observed.

  11. Silo outflow of soft frictionless spheres

    Science.gov (United States)

    Ashour, Ahmed; Trittel, Torsten; Börzsönyi, Tamás; Stannarius, Ralf

    2017-12-01

    Outflow of granular materials from silos is a remarkably complex physical phenomenon that has been extensively studied with simple objects like monodisperse hard disks in two dimensions (2D) and hard spheres in 2D and 3D. For those materials, empirical equations were found that describe the discharge characteristics. Softness adds qualitatively new features to the dynamics and to the character of the flow. We report a study of the outflow of soft, practically frictionless hydrogel spheres from a quasi-2D bin. Prominent features are intermittent clogs, peculiar flow fields in the container, and a pronounced dependence of the flow rate and clogging statistics on the container fill height. The latter is a consequence of the ineffectiveness of Janssen's law: the pressure at the bottom of a bin containing hydrogel spheres grows linearly with the fill height.

  12. De portadas y retablos: Siloe y Vandelvira

    Directory of Open Access Journals (Sweden)

    Luz de Ulierte Vázquez

    2009-12-01

    Full Text Available Partiendo de Siloe y su portada del Perdón de la Catedral de Granada, Andrés de Vandelvira realiza con ciertas diferencias la principal del Salvador de Úbeda, convirtiéndola en una portada-retablo. La obra será punto de partida para una serie de portadas giennenses y para la introducción del lenguaje del retablo como arquitectura en la provincia de Jaén. En la de Granada, aparte de en Guadahortuna, la del Perdón no tendrá descendencia directa: el paradigma para las parroquiales de la provincia será el tipo de otras portadas de su Catedral, y sus retablos se convertirán al lenguaje arquitectónico algo más tardíamente.

  13. Unidade piloto em regime de batelada com sistema de reatores anaeróbios + microalgas + wetlands construídos em fluxo vertical

    Directory of Open Access Journals (Sweden)

    Matheus Wink

    2016-10-01

    Full Text Available Três configurações para operar em batelada sistemas integrados que evoluíram para Reatores Anaeróbios + Microalgas + Wetlands Construídos de Fluxo Vertical (RA + MA + WCFV foram investigadas neste trabalho, tendo as configurações as seguintes características: combinação de tanque de MA com 90L de volume útil, dotado de recirculação interna em cone de acrílico e externa com tanque de 20L, também em acrílico, sendo integrado com WCFV com tempo de detenção hidráulico (TDH de 3 dias com a macrófita Hymenachne grumosa. A configuração do sistema RAs +MA + WCFV vem em operação nos últimos 8 meses, mostrando reduções totais de N-NH4+ (com concentração inicial de 68 mg L-1 , associando 50% de redução de DQO e 70% de fósforo total. Melhorias para o controle de remoção de algas residuais devem ser feitas para aplicação do WCFV, especialmente quanto a carga volumétrica, que deverá ser com até 20 cm dia-1. Para continuidade da evolução foram considerados que devem ser pesquisados os seguintes aspectos: impossibilidade de operação do sistema em fluxo contínuo; drenagem do sistema de lodo não permite sua remoção completa nos Reatores Anaeróbios (RAs e impossibilidade de recarga simultânea dos sistemas.

  14. Distribuição vertical e horizontal de temperaturas do ar em ambientes protegidos Vertical and horizontal distribution of air temperature in a plastic greenhouse

    Directory of Open Access Journals (Sweden)

    Raquel A. Furlan

    2002-04-01

    Full Text Available Este trabalho foi realizado na área experimental do Departamento de Engenharia Rural da Escola Superior de Agricultura "Luiz de Queiroz", Piracicaba, SP, Brasil, em dois ambientes protegidos construídos no sentido leste-oeste, com área total de 112 m² e coberto com plástico (150 micra, tratado contra raios ultravioleta. Para caracterizar a distribuição espacial da temperatura do ar no ambiente protegido, instalaram-se termopares (cobre-constantã formando malhas, com espaçamento horizontal entre eles de 3,0 m e nas alturas de 0,5, 1,0, 2,0, 3,0 e 4,0 m em relação ao solo. Os dados foram armazenados a cada 15 min por sistemas automáticos de aquisição de dados nos ambientes protegidos. O sistema de nebulização constituiu-se de duas linhas com 70 bocais totais, instalados a uma altura de 3,0 m, utilizando-se uma pressão de trabalho de 200 kPa. A nebulização não afetou o gradiente vertical de temperatura, que manteve a tendência de aumento de temperatura com a altura, em relação ao nível do solo, enquanto o efeito na redução de temperatura pelo sistema de nebulização somente foi eficaz durante a realização da mesma. Para a representação da distribuição espacial de temperatura do ar no ambiente protegido nos diferentes níveis de altura, construiu-se superfícies isotérmicas a partir dos resultados. Verifica-se que a nebulização apresentou maior efeito na homogeneização da distribuição de temperatura no ambiente protegido no nível referente a 2,0 m de altura, em relação ao solo.This work was conducted in the experimental area of the Department of Rural Engineering of "Escola Superior de Agricultura Luiz de Queiroz", University of São Paulo, Piracicaba, São Paulo, Brazil. Two greenhouses were installed in the east-west direction, with 6.4 m of width, 17.5 m of length and 3.0 m high, with total area of 112 m²; covered by plastic of 150 micra thickness, treated against ultra violet rays. To characterize the

  15. Exploring the Impact of Silos in Achieving Brand Orientation

    DEFF Research Database (Denmark)

    Gyrd-Jones, Richard I.; Helm, Clive; Munk, Jonas

    2013-01-01

    the achievement of brand orientation. Through inductive analysis of a case study of an organisation implementing a major brand-revitalisation strategy, this paper demonstrates how, despite a strong brand vision and high level of management commitment, functional silos associated with different mindsets......Brands are widely recognised as important sources of organisational value. Brand orientation describes the extent to which the organisation is orientated around the brand and around maximising brand potential. However, silos or divisions within the culture of an organisation can frustrate...... contributed to the failure of the new brand strategy. The paper concludes with recommendations for the brand platform to be implemented meaningfully and effectively within each silo....

  16. Development And Evaluation Of A Prototype Household Wooden Silo

    African Journals Online (AJOL)

    A prototype household wooden silo with 8 kg capacity for storing shelled maize was designed, constructed and evaluated for performance. The structure was rectangular in shape, of total height of 0.6 m and width of 0.3 m, with a conical top inclined at an angle of 30 º with 0.1 m height and 0.3 m width. The silo had a top ...

  17. Application of EM holographic methods to borehole vertical electric source data to map a fuel oil spill

    International Nuclear Information System (INIS)

    Bartel, L.C.

    1993-01-01

    The multifrequency, multisource holographic method used in the analysis of seismic data is to extended electromagnetic (EM) data within the audio frequency range. The method is applied to the secondary magnetic fields produced by a borehole, vertical electric source (VES). The holographic method is a numerical reconstruction procedure based on the double focusing principle for both the source array and the receiver array. The approach used here is to Fourier transform the constructed image from frequency space to time space and set time equal to zero. The image is formed when the in-phase part (real part) is a maximum or the out-of-phase (imaginary part) is a minimum; i.e., the EM wave is phase coherent at its origination. In the application here the secondary magnetic fields are treated as scattered fields. In the numerical reconstruction, the seismic analog of the wave vector is used; i.e., the imaginary part of the actual wave vector is ignored. The multifrequency, multisource holographic method is applied to calculated model data and to actual field data acquired to map a diesel fuel oil spill

  18. Applications of EM holographic methods to borehole vertical electric source data to map a fuel oil spill

    International Nuclear Information System (INIS)

    Bartel, L.C.

    1993-01-01

    The multifrequency, multisource holographic method used in the analysis of seismic data is to extended electromagnetic (EM) data within the audio frequency range. The method is applied to the secondary magnetic fields produced by a borehole, vertical electric source (VES). The holographic method is a numerical reconstruction procedure based on the double focusing principle for both the source array and the receiver array. The approach used here is to Fourier transform the constructed image from frequency space to time space and set time equal to zero. The image is formed when the in-phase part (real part) is a maximum or the out-of-phase (imaginary part) is a minimum; i.e., the EM wave is phase coherent at its origination. In the application here the secondary magnetic fields are treated as scattered fields. In the numerical reconstruction, the seismic analog of the wave vector is used; i.e., the imaginary part of the actual wave vector is ignore. The multifrequency, multisource holographic method is applied to calculated model data and to actual field data acquired to map a diesel fuel oil spill

  19. Analysis of Cylindrical Granular Material Silos under Seismic Excitation

    Directory of Open Access Journals (Sweden)

    Christoph Butenweg

    2017-07-01

    Full Text Available Silos generally work as storage structures between supply and demand for various goods, and their structural safety has long been of interest to the civil engineering profession. This is especially true for dynamically loaded silos, e.g., in case of seismic excitation. Particularly thin-walled cylindrical silos are highly vulnerable to seismic induced pressures, which can cause critical buckling phenomena of the silo shell. The analysis of silos can be carried out in two different ways. In the first, the seismic loading is modeled through statically equivalent loads acting on the shell. Alternatively, a time history analysis might be carried out, in which nonlinear phenomena due to the filling as well as the interaction between the shell and the granular material are taken into account. The paper presents a comparison of these approaches. The model used for the nonlinear time history analysis considers the granular material by means of the intergranular strain approach for hypoplasticity theory. The interaction effects between the granular material and the shell is represented by contact elements. Additionally, soil–structure interaction effects are taken into account.

  20. Maternidade e projetos vitais em jovens infectadas com HIV por transmissão vertical

    Directory of Open Access Journals (Sweden)

    Ana Paula Eid

    2015-01-01

    Full Text Available Este artículo relata una investigación cualitativa con el objetivode analizar a través de entrevistas narrativas, autobiográficas, cómo los jóvenes VIH positivos,infectadas con trasmisión vertical, construyen sus proyectos de vida y sobretodo de maternidad. Elanálisis de las entrevistas se basó teóricamente en Análisis Crítico del Discurso (ACD. Emergierondos ejes de discusión: Proyecto Vital y Maternidad. Las narrativas apuntan hacia una construcciónde proyecto vital basadas en cuatro elementos complementarios: estudio, trabajo, conyugalidad yfuturo. El eje discursivo Maternidad, se comprehende a través de seis elementos clave: la maternidad,embarazo planeado y no planeado, parto y puerperio, la lactancia, El VIH versus hijo(a sano(a yculpa y responsabilidad. Factores particulares, como prejuicio, aspiraciones y miedos, atraviesan lacotidianidad de quien vive con VIH/Sida. Las participantes perciben que la sociedad no las consideraaptas para crear una familia y luchar por sus proyectos de vida.

  1. Maternidade e projetos vitais em jovens infectadas com HIV por transmissão vertical

    Directory of Open Access Journals (Sweden)

    Ana Paula Eid, Brasil

    2015-07-01

    Full Text Available (analítico Este artículo relata una investigación cualitativa con el objetivo de analizar a través de entrevistas narrativas, autobiográficas, cómo los jóvenes VIH positivos, infectadas con trasmisión vertical, construyen sus proyectos de vida y sobretodo de maternidad. El análisis de las entrevistas se basó teóricamente en Análisis Crítico del Discurso (ACD. Emergieron dos ejes de discusión: Proyecto Vital y Maternidad. Las narrativas apuntan hacia una construcción de proyecto vital basadas en cuatro elementos complementarios: estudio, trabajo, conyugalidad y futuro. El eje discursivo Maternidad, se comprehende a través de seis elementos clave: la maternidad, embarazo planeado y no planeado, parto y puerperio, la lactancia, El VIH versus hijo(a sano(a y culpa y responsabilidad. Factores particulares, como prejuicio, aspiraciones y miedos, atraviesan la cotidianidad de quien vive con VIH/Sida. Las participantes perciben que la sociedad no las considera aptas para crear una familia y luchar por sus proyectos de vida.

  2. Prevalência de HIV em gestantes e transmissão vertical segundo perfil socioeconômico, Vitória, ES

    Directory of Open Access Journals (Sweden)

    Anne Caroline Barbosa Cerqueira Vieira

    2011-08-01

    Full Text Available OBJETIVO: Descrever a prevalência de infecção por HIV em gestantes e a taxa de transmissão vertical, segundo o perfil socioeconômico dos bairros de residência das mães. MÉTODOS: Estudo ecológico exploratório utilizando a base de dados do Sistema de Informação de Agravos de Notificação de gestantes HIV-positivas e aids em crianças notificadas entre 2000 e 2006 em Vitória, ES. Para análise das informações socioeconômicas foi utilizado o Índice de Qualidade Urbana. A prevalência de HIV em gestantes e a taxa de transmissão vertical foram calculadas. A distribuição espacial dos casos foi realizada no programa Terraview 3.2.0. Para verificar a associação entre a qualidade urbana e a prevalência de HIV em gestantes utilizou-se o modelo de regressão de Poisson. RESULTADOS: Um total de 137 gestantes e 14 crianças infectadas por transmissão vertical foi notificado no período. Sete crianças correspondiam a mães HIV-positivas sem notificação de caso no período analisado. A prevalência de infecção em gestantes no período foi de 0,44% e a taxa de transmissão vertical foi de 9,7%. CONCLUSÕES: A prevalência de infecção por HIV em gestantes e a transmissão vertical associam-se à qualidade urbana do bairro de residência, indicando que os bairros com menor qualidade urbana devem ser priorizados quanto às ações para redução da transmissão vertical.

  3. Degradation modelling for the concrete silo in TVO's VLJ repository

    International Nuclear Information System (INIS)

    Alcorn, S.R.; Christian-Frear, T.L.; Wallace, M.

    1991-05-01

    Teollisuuden Voima Oy (TVO) is currendy construcing in Finland an underground repository (the VLJ repository) for storage of low- and intermediate-level radioactive wastes generated at the Olkiluoto (TVO I and TVO II) nuclear power plant. Intermediate level wastes will be emplaced inside a large concrete silo, which is the principal engineered barrier in the repository. The primary objective of the investigation is to develop an estimate of the length of time it will take for the silo to degrade due to interaction with groundwater to the point that it fails to perform as designed. A secondary objective is to develop a methodology to estimate the length of time required for radio nuclides to migrate from the region inside the silo through the silo wall and floor to the accessible environment as a function of cement and concrete properties. Chemical modeling techniques using the codes EQ3NR/EQ6 were employed to model the degradation of the repository concrete due to interaction with groundwater, and porous flow and diffusion modeling approaches were taken to: (1) estimate the time it would take groundwater and ions to travel into and out of the silo concrete, and (2) determine how these travel times change as the concrete degrades. The results of the investigation suggest that the hydraulic conductivity of the concrete will decrease over time because of the considerable net volume increase (net porosity decrease) from the chemical interactions. Therefore, it appears likely, based on the geochemical and mass transport models, that the silo win perform as required for at least its 500-year design life, and possibly much longer

  4. 30 CFR 56.16002 - Bins, hoppers, silos, tanks, and surge piles.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Bins, hoppers, silos, tanks, and surge piles... MINES Materials Storage and Handling § 56.16002 Bins, hoppers, silos, tanks, and surge piles. (a) Bins, hoppers, silos, tanks, and surge piles, where loose unconsolidated materials are stored, handled or...

  5. 30 CFR 57.16002 - Bins, hoppers, silos, tanks, and surge piles.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Bins, hoppers, silos, tanks, and surge piles... NONMETAL MINES Materials Storage and Handling § 57.16002 Bins, hoppers, silos, tanks, and surge piles. (a) Bins, hoppers, silos, tanks, and surge piles, where loose unconsolidated materials are stored, handled...

  6. Natural phenomena hazards evaluation of concrete silos 1, 2, 3 and 4 at Fernald, Ohio

    International Nuclear Information System (INIS)

    Char, C.V.; Shiner, T.J.

    1995-08-01

    Fernald Environmental Management Project (FEMP) is a United States Department of Energy (DOE) site located near Cincinnati, Ohio. FEMP was formerly established as the Feed Materials Production Center (FMPC) in 1951 under the Atomic Energy Commission. FEMP is currently undergoing site wide environmental remediation. This paper addresses four concrete silos built during the 1950s and located in Operable Unit 4 (OU-4). Silos 1 and 2 known as K-65 Silos contain residues from Uranium Ore processing. Silo 3 contains metal oxides in powder form. Silo 4 is empty. The Silos are categorized as low hazard facilities and the Natural Phenomena Hazards (NPH) performance category is PC-2, based on a recently completed safety analysis report. This paper describes the structural evaluation of concrete Silos 1, 2, 3 and 4 for NPH. Non Destructive Tests (NDT) were conducted to establish the current conditions of the silos. Analytical and computer methods were used to evaluate the stresses and displacements for different silo configurations and different loading combinations. Finite element models were developed to uniquely represent each silo, and analyzed using SAP90 computer program. The SAPLOT post processor was used for rapid determination of critical areas of concern for critical loading combinations and for varying silo configurations

  7. Transmissão vertical do HIV em população atendida no serviço de referência Vertical transmission of HIV in the population treated at a reference center

    Directory of Open Access Journals (Sweden)

    Sueli Teresinha Cruz Rodrigues

    2013-01-01

    Full Text Available OBJETIVO: Identificar a taxa de transmissão vertical do HIV e avaliar os fatores envolvidos em partes materna e fetal. MÉTODOS: Estudo transversal realizado no Serviço de Atendimento Especializado. Foram investigados 102 prontuários de mulheres com HIV que deram à luz a recém-nascidos vivos. RESULTADOS: A prevalência de 6,6% de transmissão vertical. Entre as crianças infectadas: 40,0% de mães sem pré-natal e 75% sem a profilaxia com anti-retrovirais durante o pré-natal, 50,0% sem profilaxia com AZT com oral e amamentado. Entre as crianças não infectadas: 91,5% iniciaram a profilaxia com AZT oral ao nascimento e 84,1% das mães receberam ARV. CONCLUSÃO: A ocorrência de transmissão vertical do HIV no serviço de referência correspondeu a 6,6%, o que indica uma alta prevalência.OBJECTIVE: To identify the rate of vertical transmission of HIV and assess the factors involved in maternal and fetal share. METHODS: Cross-sectional study conducted in the Specialized Care Service. We investigated 102 clinical records of HIV positive women who had given birth to live newborns. The primary variable was the occurrence of vertical transmission of HIV and the secondary variables were the factors associated with vertical transmission of HIV. RESULTS: Prevalence of 6.6% of vertical transmission. Among the infected children: 40.0% of mothers with out prenatal care and 75% without prophylaxis with antiretroviral drugs during the prenatal, 50.0% without AZT prophylaxis with oral and breast-fed. Among the uninfected children: 91.5% were started on prophylaxis with oral AZT at birth and 84.1% of mothers received ARV delivery. CONCLUSION: The occurrence of vertical transmission of HIV in the reference service corresponded to 6.6%, indicating a high prevalence.

  8. Seismic Base Isolators For A Silo Supporting Structure

    Directory of Open Access Journals (Sweden)

    Bîtcă Daniel

    2015-05-01

    Full Text Available A 3000 tones capacity silo, located in a seismic area with ground acceleration ag = 0,20g and TC =1,0s, was designed in a classical solution The supporting structure has an octagonal shape in planview, and columns with “Maltese cross sections”. The main lateral resisting system is made up of centric bracings with cross-section class I.

  9. Parto vertical em hospital universitário: série histórica, 1996 a 2005 Vertical-position births at a University Hospital: a time-series study, 1996 to 2005

    Directory of Open Access Journals (Sweden)

    Odaléa Maria Brüggemann

    2009-06-01

    Full Text Available OBJETIVOS: descrever a evolução do número de partos horizontais e verticais na maternidade do Hospital da Universidade Federal de Santa Catarina, Brasil, e avaliar a associação dos mesmos com a taxa de cesárea, de internações dos recém-nascidos em unidade de tratamento intensivo e semi-intensivo e as transfusões sanguíneas maternas. MÉTODOS: estudo descritivo -série histórica. Foram incluídos todos os partos, as internações dos recémnascidos na Unidade de Terapia Intensiva e as transfusões sanguíneas maternas ocorridas de 1996 até 2005. Para testar as tendências, utilizou-se o método de Prais-Winsten para regressão linear generalizada. RESULTADOS: em 1996 a porcentagem de partos verticais era 5,4% e em 2005 foi 52,3%. A variação média anual dos partos verticais foi de +20,8% (p=0,007 e dos partos horizontais de -15,2% (pOBJECTIVES: to describe the evolution of the number of horizontal and vertical births in the maternity ward of the University Hospital of the Federal University of Santa Catarina, Brazil and to evaluate their correlation with the rates for caesarian, for transfer of newborns to intensive and semi-intensive care units, and maternal blood transfusions. METHODS: a time-series study. All births resulting in newborns being transferred to the Intensive Care Unit, and the maternal blood transfusions obstetrics ward between 1996 and 2005 were included in this study. In order to test the tendencies, the Prais-Winsten generalized linear regression method was used. RESULTS: in 1996 the percentage for vertical births was 5.4% and in 2005 52.3%. The average annual variance for vertical births was +20.8% (p=0.007, and for horizontal births -15.2% (p<0.001. Caesarian births showed a tendency to stabilize (p=0.243. There was a decrease of in the number of newborns transferred to the neonatal intensive care unit, 6.1% per year (p=0.001 and in the need of maternal blood transfusions (5.2% -p<0.01. CONCLUSIONS: the

  10. Sintering study in vertical fixed bed reactor for synthetic aggregate production; Estudo da sinterizacao em reator vertical de leito fixo para producao de agregado sintetico

    Energy Technology Data Exchange (ETDEWEB)

    Quaresma, D.S.; Neves, A.S.S.; Melo, A.O.; Pereira, L.F.S.; Bezerra, P.T.S.; Macedo, E.N.; Souza, J.A.S., E-mail: danysq@gmail.com [Universidade Federal do Para (UFPA), Belem, PA (Brazil). Faculdade de Engenharia Quimica

    2017-04-15

    The synthetic aggregates are being employed in civil construction for the reduction of mineral extraction activities. Within this context, the recycling of industrial waste is the basis of the majority of processes to reduce the exploitation of mineral resources. In this work the sintering in a vertical fixed bed reactor for synthetic aggregate production using 20% pellets and 80% charcoal was studied. The pellets were prepared from a mixture containing clay, charcoal and fly ash. Two experiments varying the speed of air sucking were carried out. The material produced was analyzed by X-ray diffraction, scanning electron microscopy, measures of their ceramic properties, and particle size analysis. The results showed that the solid-state reactions, during the sintering process, were efficient and the produced material was classified as coarse lightweight aggregate. The process is interesting for the sintering of aggregates, and can be controlled by composition, particle size, temperature gradient and gaseous flow. (author)

  11. Experimental silo-dryer-aerator for the storage of soybean grains

    Directory of Open Access Journals (Sweden)

    Paulo C. Coradi

    Full Text Available ABSTRACT This study aimed to verify the capacity of silo-dryer-aerator prototype equipment operating as a silo-storage-aerator for soybean quality analysis. Soybeans with water content of 17% (wet basis – w.b. were dried and stored in a silo-dryer-aerator system that was designed using a drying chamber, four independent storage cells, and a static capacity of 164 kg. Another batch of grains was stored in a silo-storage-aerator with a capacity of 1,200 kg. The experiment was set up in a completely randomized factorial 5 × 4 experimental design including five grain batches stored after being dried at 30, 40, and 50 °C (mixed grains were dried at three temperatures in the silo-dryer-aerator cells and one mixed grain batch stored in the silo-storage-aerator system under ambient air conditions for four storage times (zero, one, two, and three months. There was no difference between the grains stored in the silo-dryer-aerator and silo-storage-aerator at the end of the three-month storage in terms of the physico-chemical quality. The storage time associated with drying at 50 °C caused a reduction in the physical-chemical quality of the grains. The silo-dryer-aerator system was presented as a possible alternative to store soybean (Glycine max L. grains.

  12. Avaliação da capacidade preditiva da bioimpedância tetrapolar segmentada vertical na detecção do excesso de peso em adolescentes

    Directory of Open Access Journals (Sweden)

    Felipe Silva Neves

    2015-12-01

    Full Text Available Resumo Objetivo Analisar a capacidade preditiva da bioimpedância tetrapolar segmentada vertical na detecção do excesso de peso em adolescentes com o uso da bioimpedância tetrapolar horizontal como referência. Métodos Estudo transversal feito com 411 alunos de 10 a 14 anos, de ambos os sexos, matriculados em escolas públicas e privadas, selecionados por processo amostral aleatório simples e estratificados de acordo com sexo, idade e proporção em cada instituição. Foi feita avaliação antropométrica e analisada a composição corporal por meio das bioimpedâncias bipolar vertical, tetrapolar horizontal e tetrapolar segmentada vertical. Foram construídas as curvas ROC com base nos cálculos de sensibilidade/especificidade para cada ponto das diferentes medições possíveis de gordura corporal do equipamento em questão. Posteriormente, foram executados os seguintes testes estatíticos: t de Student, correlação de Pearson e qui-quadrado de McNemar. Para a interpretação das variáveis, usou-se o software SPSS 17.0. Resultados A amostra foi composta por 53,7% meninas e 46,3% meninos. Do total, 20% e 12,5% exibiram, respectivamente, sobrepeso e obesidade. Os gráficos das medidas dos segmentos corporais refletiram-se em altos valores de sensibilidade e especificidade, além de elevadas áreas sob a curva ROC, que variaram de 0,83 a 0,95 para meninas e de 0,92 a 0,98 para meninos, o que sugere um desempenho levemente superior para o sexo masculino. O percentual de gordura total foi apontado como o critério mais eficiente do equipamento para a detecção do excesso de peso, enquanto a gordura segmentar do tronco apresentou-se como um indicador de precisão inferior. Conclusão A aparelho comportou-se satisfatoriamente na predição do excesso de peso.

  13. Cracked reinforced concrete walls of chimneys, silos and cooling towers as result of using formworks

    Directory of Open Access Journals (Sweden)

    Maj Marek

    2018-01-01

    Full Text Available There are presented in this paper some problems connected with reinforced concrete shell objects operation in the aggressive environment and built in method of formworks. Reinforced concrete chimneys, cooling towers, silos and other shells were built for decades. Durability of cracked shells are one of the most important parameters during process of designing, construction and exploitation of shells. Some reasons of appearance of horizontal and vertical cracks as temperature, pressure of stored material, live loads e.g. dynamic character of wind, moisture, influence of construction joints, thermal insulation, chemistry active environmental etc. reduce the carrying capacity of the walls. Formworks, as is occurred recently, are the reason for technological joints with leaking connection, imperfections of flexible formworks slabs and as result can initiate cracks. Cracked surface of this constructions causes decreasing capacity and lower the state of reliability. Horizontal, vertical cracks can caused corrosion of concrete and steel bars, decreasing stiffness of contraction, increasing of deflection and carbonation of concrete cover. Local and global imperfactions of concrete shells are increasing according to greater number of cracks...

  14. Coeficiente de transferência de carga nas fundações de silos verticais cilíndricos

    Directory of Open Access Journals (Sweden)

    Marivone Z. Fank

    2015-09-01

    Full Text Available RESUMOO dimensionamento das estruturas armazenadoras de grãos carece de uma norma brasileira que prescreva sobre seus projetos e ações; contudo, existem muitas lacunas no estado atual do conhecimento sendo imprescindíveis pesquisas adicionais sobre o tema. Com o objetivo de determinar a distribuição das cargas nas fundações dos silos foram instrumentadas, por meio de células de carga, quatro estacas localizadas sob o anel de um silo protótipo. O experimento ocorreu durante o período de agosto a dezembro de 2009 em Palotina, PR. As leituras das células foram realizadas por sistema automático de aquisição de dados durante o carregamento de grãos de milho e, a partir dos resultados, pode-se destacar um coeficiente de transferência médio de 0,30 para o anel até o carregamento de 44% do silo, a partir do qual ocorreu um incremento na taxa de transferência. As cargas máximas atuantes nas estacas instrumentadas foram de 800, 845, 520 e 600 kN, correspondentes a coeficientes de transferência de 0,48; 0,51; 0,31 e 0,36, respectivamente. Assim, o coeficiente regionalmente adotado de 0,30 para o dimensionamento das fundações do anel está subestimado fazendo-se necessária uma análise mais criteriosa nas taxas de transferência.

  15. Distribuição vertical e sazonal de Anopheles (Kerteszia em Ilha Comprida, SP Vertical and seasonal distribution of Anopheles (Kerteszia in Ilha Comprida, Southeastern Brazil

    Directory of Open Access Journals (Sweden)

    Helene Mariko Ueno

    2007-04-01

    Full Text Available OBJETIVO: Anopheles bellator e An. cruzii são vetores da malária-bromélia, característicos de áreas preservadas. O objetivo do estudo foi analisar a distribuição sazonal e vertical desses anofelinos, visando contribuir para a avaliação do risco de transmissão desse agravo. MÉTODOS: No município de Ilha Comprida, SP, foram instaladas armadilhas luminosas tipo CDC iscadas com gelo seco, das 17 às 20h, a um, seis e 12m do solo, quinzenalmente, de setembro de 2001 a setembro de 2002. A relação da densidade desses anofelinos com o clima foi avaliada pelo coeficiente de Spearman e suas densidades entre os estratos foram comparadas pelo teste não paramétrico de Mann-Whitney. RESULTADOS: Do total de 55.226 mosquitos, 1.341 eram An. bellator (2,4% do total de Culicidae, sendo capturados 278 indivíduos próximo ao solo, 261 a seis metros e 802 na copa (12 m. Na mesma ordem, foram capturados 452, 1.032 e 4.420 adultos de An. cruzii, totalizando 5.904 mosquitos desta espécie (10,7%. Houve correlação positiva entre a densidade das duas espécies com a temperatura máxima, e entre An. bellator e amplitude térmica diária. As densidades das duas espécies foram maiores na copa. Nos três estratos, An. cruzii predominou sobre An. bellator. CONCLUSÕES: Confirmou-se o comportamento acrodendrófilo dessas espécies, principalmente An. cruzii. Após medidas drásticas de controle, esses anofelinos permaneceram na região mas, atualmente, não são alvo de vigilância entomológica. A persistência da transmissão de malária autóctone e o incremento de atividades de ecoturismo na região apontam a necessidade de monitoramento dessas espécies.OBJECTIVE: Anopheles bellator e An. cruzii are vectors of the so-called bromeliad-malaria, typical of conserved areas. The objective was to evaluate the seasonal and vertical distribution of these anophelines, aiming at assessing the risk of malaria transmission. METHODS: In the municipality of Ilha

  16. Acesso transeptal vertical ampliado em reoperações valvares mitrais com átrio esquerdo pequeno Extended vertical transseptal approach in mitral valve reoperation with a small left atrium

    Directory of Open Access Journals (Sweden)

    Walter Vosgrau Fagundes

    2004-03-01

    Full Text Available OBJETIVO: Avaliar a abordagem transeptal vertical ampliada em reoperações da valva mitral com átrio esquerdo pequeno. MÉTODO: De janeiro de 2001 a dezembro de 2002, 15 pacientes portadores de doença valvar mitral com indicação de reintervenção cirúrgica, átrio esquerdo pequeno (menor ou igual a 4,0 cm e fibrilação atrial crônica, foram submetidos à abordagem transeptal vertical ampliada da valva mitral. Nove pacientes (pt eram do sexo feminino. A idade variou de 22 a 48 anos. As indicações cirúrgicas foram: disfunção de prótese mitral (seis pt; insuficiência mitral (cinco pt e dupla lesão mitral (quatro pt. Três pacientes apresentavam insuficiência aórtica associada e um pt, insuficiência tricúspide. Nove (60% pacientes encontravam-se em ICC CF III da NYHA e seis (40%, em CF IV. RESULTADOS: A exposição do aparelho valvar mitral foi excelente. O tempo de circulação extracorpórea variou de 65 a 150 min (média = 95min. Foram implantadas próteses em todos os pacientes (15 mitrais, três aórticas e um tricúspide. A mortalidade hospitalar foi de 6,7%, com um óbito devido a baixo débito cardíaco e falência de múltiplos órgãos. Um (6,7% paciente apresentou broncopneumonia na fase hospitalar. Dez pacientes permaneceram com fibrilação atrial, três pt reverteram para ritmo sinusal e um evoluiu com ritmo juncional. A permanência hospitalar média foi de 8,2 dias. Doze (85,7% pacientes encontram-se em CF I e dois (14,3% em CF II. A curva atuarial de sobrevida é de 92,5 % em 22 meses de seguimento. CONCLUSÃO: A técnica cirúrgica empregada proporciona excelente visibilização do aparelho valvar mitral, com baixo índice de complicações.OBJECTIVE: To evaluate the efficacy of the extended vertical transseptal approach in mitral valve reoperation with a small left atrium. METHOD: From January 2001 to December 2002, 15 patients with previous mitral operations, small left atrium and atrial fibrillation

  17. Diafragmas horizontais de piso em madeira, confeccionados com chapas de OSB e vigas I, submetido ao carregamento vertical = Wood light-frame floor diaphragms, made with OSB panels and Ijoists, subjected to vertical loads

    Directory of Open Access Journals (Sweden)

    Altevir Castro dos Santos

    2007-07-01

    Full Text Available Este trabalho aborda construções em madeira sob a ótica de sistemas com estruturas leves; apresenta análise computacional por meio de modelagem pelo método de elementos finitos de diafragmas de piso e vigas I, submetidas a ensaio de flexão a quatro pontos. O objetivo geral é avaliar a resistência e a rigidez de diafragmas horizontais,construídos em Sistemas Leves de Madeira, quando submetidos a ações verticais. As análises foram realizadas por meio do programa computacional SAP2000 e foram avaliadas as influências dos seguintes parâmetros: espaçamento entre vigas que constituem os elementosde ossatura do diafragma horizontal e o espaçamento entre pregos de fixação do contrapiso, composto por chapas de OSB – Oriented Strand Board. Ao final do trabalho, comparam-se os resultados obtidos a partir das análises numérica e teórica, e são apresentadas algumasconclusões.Wood light-frame floor diaphragms, made with OSB panels and I-joists, subjected to vertical loads. This work is focused on lightweight woodframe constructions, and presents a finite element modeling of floor diaphragms and wood I-joists subjected to four-point bending. It presents the results of experimental tests on wood I-joists subjected to vertical loads. The main goal of this research is to evaluate the resistance and rigidity of wood light-frame floor diaphragms, when subjected to monotonic vertical forces acting in the plane of the floor. The analyses were performed using the SAP2000 computer program and tested with diferent constructive arrangements, and the influence of the following variables were examined: distance between wood I-joists, and distance between nails around the perimeter of the OSB boards. Finally, a comparison between analytical and numerical results is performed.

  18. Extinguishing smouldering fires in silos. BRANDFORSK project 745-961

    Energy Technology Data Exchange (ETDEWEB)

    Tuomisaari, M.; Baroudi, D.; Latva, R. [VTT Building Technology, Espoo (Finland). Building Physics, Building Services and Fire Technology

    1998-11-01

    Combustible, porous materials may self-ignite during their storage time in silos as a result of internal heating. The self-ignition process may be slow, and it results in smouldering fires that are extremely difficult to extinguish. Suitable means to fight the smouldering fire were studied both theoretically and experimentally. General heat and mass transfer equations for porous media subject to fires and suppression were written. The equations together with dimensional analysis revealed critical parameters, like the grain size and moisture content, affecting the combustion and suppression process, but they also revealed the complexity of the problem. Experimental results of over 50 tests with varying combustibles and suppression agents were used as the basis for proposed qualitative guidelines on how to fight a smouldering silo fire. Among the potential gaseous agents, CO{sub 2} was found to be the most efficient one. Low expansion foam was also found to be a potential candidate, but its applicability requires further confirmation. Quantifying the guidelines requires a whole new study on the detection of a smouldering fire. The same detection system should be capable of monitoring the suppression process and - most importantly - verifying the extinguishment. (orig.) 46 refs.

  19. "Vertical mulching" como prática conservacionista para manejo de enxurrada em sistema plantio direto Vertical mulching as a soil conservation practice to manage runoff in no tillage systems

    Directory of Open Access Journals (Sweden)

    José Eloir Denardin

    2008-12-01

    Full Text Available Nas regiões brasileiras de clima temperado e subtropical úmido, situadas ao sul do paralelo 24° de latitude sul, as características fundamentais da chuva apresentam potencial para superar a taxa de infiltração de água no solo e gerar enxurrada, em qualquer época do ano, independentemente do uso e do manejo de solo. O sistema plantio direto não tem sido implementado com a plenitude das práticas conservacionistas requeridas pelas condições de solo dessas regiões do País para conter o potencial erosivo de chuvas intensas. A enxurrada resulta na produção de sedimento enriquecido por agroquímicos, que, além de promover prejuízos econômicos ao sistema agrícola produtivo, pode afetar a ambiência. Este trabalho teve por objetivo avaliar a eficiência da prática conservacionista vertical mulching no manejo de enxurrada em lavouras sob sistema plantio direto, por meio da quantificação do índice de enriquecimento do sedimento. O estudo contemplou amostragens pareadas de solo em lavouras sem e com a prática conservacionista vertical mulching. As amostras pareadas foram constituídas por solo representativo de cada lavoura e pelo respectivo sedimento gerado por erosão hídrica. As amostras foram submetidas à determinação de pH em água, índice SMP, P disponível, K, Ca, Mg e Al trocáveis e matéria orgânica, e calculadas a soma de bases, a saturação por bases e a capacidade de troca de cátions efetiva. Os resultados indicam que a prática conservacionista vertical mulching reduz o grau de enriquecimento do sedimento produzido e previne o carreamento deste para fora da lavoura, minimizando perdas econômicas e riscos à ambiência. Em adição, infere-se que o sistema plantio direto, sem práticas complementares para manejo de enxurrada, não representa manejo conservacionista de solo capaz de prevenir degradação ambiental.In regions of temperate and subtropical humid climate in Brazil, below the parallel of 24

  20. Vitrification of Simulated Fernald K-65 Silo Waste at Low Temperature

    International Nuclear Information System (INIS)

    Jantzen, C.M.

    1999-01-01

    Vitrification is the technology that has been chosen to solidify approximately 18,000 tons of geologic mill tailings at the Fernald Environmental Management Project (FEMP) in Fernald, Ohio. The geologic mill tailings are residues from the processing of pitchlende ore during 1949-1958. These waste residues are contained in silos in Operable Unit 4 (OU4) at the FEMP facility. Operable Unit 4 is one of five operable units at the FEMP. Operable Unit 4 is one of five operable units at the FEMP. Operating Unit 4 consists of four concrete storage silos and their contents. Silos 1 and 2 contain K-65 mill tailing residues and a bentonite cap, Silo 3 contains non-radioactive metal oxides, and Silo 4 is empty

  1. On the use of plate-type normal pressure cells in silos

    DEFF Research Database (Denmark)

    Ramirez, Alvaro; Nielsen, Jørgen; Ayuga, F.

    2010-01-01

    the interpretation of results. Once the cells have been delivered from the manufacturer to the researcher, they should be calibrated and validated with reference to the measurement of pressure from a granular material against a silo wall. Two related papers deal with a specific plate-type normal pressure cell...... for use in an installation of three full-scale steel silos with different hopper eccentricities (concentric, half-eccentric and full-eccentric) as part of a silo research project. It was found to be necessary to validate the performance of the cells when measuring pressures in the silos in order to arrive...... at a solid basis for the interpretation of the pressure measurements in the silo installation aforementioned. This paper presents calibration results from three investigated methods as well as results from a finite element analysis of the plate deflection of the pressure cell which were performed to evaluate...

  2. Numerical analysis of hydrodynamic forces acting on vertical lift gates; Analise dos esforcos hidrodinamicas em comportas hidraulicas

    Energy Technology Data Exchange (ETDEWEB)

    Andrade, Jell Lima de [Mecanica Pesada S.A., Taubate, SP (Brazil); Amorim, Jose Carlos Cesar [Instituto Militar de Engenharia (IME), Rio de Janeiro, RJ (Brazil)]. E-mail: jcamorim@ime.eb.br

    1997-07-01

    A numerical analysis has been developed for calculating viscous flows controlled by a vertical lift gate and hydrodynamic forces acting on it. The numerical solution is obtained from the incompressible Navier-Stoles equations. The numerical techniques is based on a finite element method. A Poisson equation is derived from the pressure-weighted substitution of the full momentum equations into the continuity equation. Turbulence effects are simulated by a K-{epsilon} turbulence model. The procedure developed here is applied for a vertical lift gate operating in a CESP installation, and the results are compared with available experimental data at various opening positions. Good agreement is obtained for the velocity and pressure distributions. (author)

  3. Confined granular flow in silos experimental and numerical investigations

    CERN Document Server

    Tejchman, Jacek

    2013-01-01

      During confined flow of bulk solids in silos some characteristic phenomena can be created, such as: —         sudden and significant increase of wall stresses, —         different flow patterns, —         formation and propagation of wall and interior shear zones, —         fluctuation of pressures and, —         strong autogenous dynamic effects. These phenomena have not been described or explained in detail yet. The main intention of the experimental and theoretical research presented in this book is to explain the above mentioned phenomena in granular bulk solids and to describe them with numerical FE models verified by experimental results.

  4. Exploring the Impact of Silos in Achieving Brand Orientation

    DEFF Research Database (Denmark)

    Gyrd-Jones, Richard; Helm, Clive; Munk, Jonas

    silos are associated with different mindsets that create barriers to the achievement of brand orientation. The case follows a medium sized manufacturing company in its efforts to introduce a brand revitalization strategy across the organization. Despite the strategy having top management full support......Brands are widely recognised as important sources of competitive advantage. The newly emerged concept of brand orientation has be used to assess the extent to which the whole organisation is orientated around the brand and thus the extent to which organisational resources are focused around...... maximising brand potential. Whilst offering potential to improve our understanding of how brands can be effectively managed and offering practitioners a set of tool to this end, this concept is limited in both its empirical and theoretical foundations. Through a case study this paper documents how functional...

  5. Efeito do Uso do Estabilizador Active Ankle System® na Altura do Salto Vertical em Jogadores de Voleibol Effect of the Use of the Active Ankle System Stabilizer in The Vertical Jump Height in Volleyball Players

    Directory of Open Access Journals (Sweden)

    Marco Túlio Saldanha dos Anjos

    2009-10-01

    Full Text Available INTRODUÇÃO E OBJETIVO: Na prática do voleibol, as entorses de tornozelo representam 25 a 50% das lesões agudas. Medidas preventivas, como estabilizadores dinâmicos de tornozelo (EDT, são frequentemente utilizadas, porém, há controvérsias se esse dispositivo pode ou não interferir no desempenho esportivo. O objetivo deste estudo foi analisar o efeito do EDT Active Ankle System® (AAS na altura do salto vertical em jogadoras de voleibol. MÉTODOS: Selecionou-se uma amostra de conveniência de 14 atletas entre 14 e 18 anos de idade, do gênero feminino. Estas foram instruídas a saltar simulando o gesto esportivo do ataque e do bloqueio com e sem o EDT, sobre placas de contato conectadas a um computador portátil que, através de um programa, calculava a altura do salto vertical. Previamente, foi feito um estudo-piloto para determinação do coeficiente de correlação intraclasse para as quatro condições de teste (n = 4, no qual os valores encontrados foram: ataque com EDT, 0,95; ataque sem EDT, 0,76; bloqueio com EDT, 0,92; bloqueio sem EDT, 0,89. Os dados de altura de cada tipo de salto vertical nas condições com e sem EDT foram comparadas através de testes t de Student para amostras pareadas. RESULTADOS: Para um nível de significância de α = 0,05, não foi encontrada diferença significativa entre os saltos do ataque com o EDT (0,41 + 0,073m e sem o EDT (0,41 + 0,086m, p = 0,517. Também não foi encontrada diferença significativa para os saltos do bloqueio com o EDT (0,31 ± 0,048m e sem o EDT (0,32 ± 0,050m, p = 0,06. CONCLUSÃO: Os resultados do presente estudo apontam para não interferência do uso do EDT AAS no desempenho do salto vertical em atletas de voleibol.INTRODUCTION AND OBJECTIVES: In volleyball practice, ankle sprains represent 25 to 50% of the acute injuries. Preventive measures such as dynamic ankle bracing (DAB are very often used; however, there is controversy on whether this would affect athletic

  6. Vertical distribution of phytoplankton functional groups in a tropical shallow lake: driving forces on a diel scale Distribuição vertical de grupos funcionais fitoplanctônicos em um lago tropical raso: forças direcionadoras em escala nictemeral

    Directory of Open Access Journals (Sweden)

    Luciana Gomes Barbosa

    2011-03-01

    Full Text Available AIM: This study analyzed the vertical distribution of phytoplankton functional groups in two diel cycles in a warm monomictic shallow tropical lake; METHODS: Sampling of the abiotic variables, phytoplankton and zooplankton communities was performed at intervals of 3 hours over 24 hours in vertical profiles, in the stratification (February and circulation (July periods; RESULTS: The high thermal stability and the partial atelomixis favored the coexistence of functional groups that are sensitive to destratification, N A and F, composed by desmids and Chlorophyceae coccoids, and groups S2 and Lo, which persisted during the circulation, and were composed by filamentous cyanobacteria which do not fix N2 and dinoflagellates, respectively. The discontinuity in the vertical distribution of the functional groups, with dominance of N A and F in the epilimnion and R and Lo in the metalimnion and hypolimnion, was characteristic of the stratification, and differences between the daytime and nighttime periods were not significant. CONCLUSIONS: The reduction of 80% of the biomass of the NA group during the mixing period indicates the influence of thermal stability and partial atelomixis as determinant factors in the compartmentalization of functional groups, restricting daytime vertical migration (DVM and loss by sedimentation during the stratification period.OBJETIVO: Analisar a distribuição vertical dos grupos funcionais fitoplanctônicos em dois ciclos nictemerais em um lago tropical monomítico raso; MÉTODOS: As amostragens das variáveis abióticas, comunidades fitoplanctônica e zooplanctônica foram realizadas a intervalos de 3 horas ao longo de 24 horas em perfis verticais, nos períodos de estratificação (fevereiro e de circulação (julho; RESULTADOS: A elevada estabilidade térmica e a atelomixia parcial favoreceram a coexistência de grupos funcionais sensíveis a desestratificação N A e F, compostos por desmidias e clorofícias cocoides e

  7. Alterações químicas e microbiológicas nas silagens de capim-Tifton 85 após a abertura dos silos Chemical and microbiological changes of Tifton 85 grass silage after silos opening

    Directory of Open Access Journals (Sweden)

    Rúben Pablo Schocken-Iturrino

    2005-04-01

    Full Text Available O trabalho foi conduzido para avaliação da presença de Listeria sp. e de fungos nas silagens de capim-Tifton 85 sem emurchecimento, com emurchecimento por uma e duas horas e sem emurchecimento com adição ou não de polpa cítrica (5,0% do peso verde. As amostragens foram efetuadas no momento da abertura do silo (80 dias da ensilagem, aos 15 e 30 dias após exposição ao ar, para avaliar os teores de matéria seca (MS, as alterações químicas (pH, N amoniacal, ácidos orgânicos e a ocorrência de Listeria sp. e de fungos. Os dados foram analisados segundo o delineamento em blocos casualizados, em esquema de parcelas subdivididas (nas parcelas foram avaliadas as silagens submetidas aos tratamentos e nas subparcelas, os períodos de exposição ao ar, com quatro repetições. Observaram-se baixos teores de ácidos orgânicos e de N amoniacal decorrentes dos altos valores de MS, o que acarretou baixa formação de produtos fermentados e elevação do pH. A presença de Listeria sp. foi observada em 65,6% das amostras no momento da abertura dos silos e, destas, 10% foram positivas para Listeria monocytogenes. As silagens apresentaram baixa estabilidade aeróbia, tendo sido registrado aumento na ocorrência dos fungos Penicillium, Fusarium e Pithomyces com o prolongamento do período de exposição ao ar.The experiment was carried out to evaluate the fermentation characteristics, Listeria sp. and molds occurrence on Tifton 85 silage no wilted, wilted for one and two hours and no wilted with or without citrus pulp (5.0 % of fresh forage. The samplings were taken at the opening of the silos (80 days after ensiling, 15, and 30 days after air exposition to evaluated dry matter (DM content, chemical changes (pH, ammonia N, organic acids and Listeria sp., and molds occurrence. Data were analyzed according to a randomized block design in split plot scheme, considering the silage on the plots, and periods of air exposure on the split plot, with four

  8. Systemic model for the aid for operating of the reactor Siloe; Modelisation systeme pour l`aide a l`exploitation du reacteur de recherche Siloe

    Energy Technology Data Exchange (ETDEWEB)

    Royer, J.C.; Moulin, V.; Monge, F. [CEA Centre d`Etudes de Grenoble, 38 (France). Direction des Reacteurs Nucleaires; Baradel, C. [ITMI APTOR, 38 - Meylan (France)

    1995-12-31

    The Service of the Reactor Siloe (CEA/DRN/DRE/SRS), fully aware of the abilities and knowledge of his teams in the field of research reactor operating, has undertaken a project of knowledge engineering in this domain. The following aims have been defined: knowledge capitalization for the installation in order to insure its perenniality and valorization, elaboration of a project for the aid of the reactor operators. This article deals with the different actions by the SRS to reach the aims: realization of a technical model for the operation of the Siloe reactor, development of a knowledge-based system for the aid for operating. These actions based on a knowledge engineering methodology, SAGACE, and using industrial tools will lead to an amelioration of the security and the operating of the Siloe reactor. (authors). 13 refs., 7 figs.

  9. Stochastic stresses in granular matter simulated by dripping identical ellipses into plane silo

    DEFF Research Database (Denmark)

    Berntsen, Kasper Nikolaj; Ditlevsen, Ove Dalager

    2000-01-01

    A two-dimensional silo pressure model-problem is investigated by molecular dynamics simulations. A plane silo container is filled by a granular matter consisting of congruent elliptic particles dropped one by one into the silo. A suitable energy absorbing contact force mechanism is activatedduring...... the granular matter in the silo are compared to thesolution of a stochastic equilibrium differential equation. In this equation the stochasticity source is a homogeneouswhite noise gamma-distributed side pressure factor field along the walls. This is a generalization of the deterministic side pressure factor...... proposed by Janssen in 1895. The stochastic Janssen factor model is shown to be fairly consistentwith the observations from which the mean and the intensity of the white noise is estimated by the method of maximumlikelihood using the properties of the gamma-distribution. Two wall friction coefficients...

  10. An assessment of temperature history on concrete silo dry storage system for CANDU spent fuel

    International Nuclear Information System (INIS)

    Lee, Dong-Gyu; Sung, Nak-Hoon; Park, Jea-Ho; Chung, Sung-Hwan

    2016-01-01

    Highlights: • We performed thermal analysis to predict the temperature distribution in the concrete silo. • Thermal analysis of the concrete silo was based on CFD code. • Temperature distribution and history for storage period was presented. • Thermal analysis results and test results agreed well. • The correlations can predict the maximum fuel temperature over storage period. - Abstract: Concrete silo is a dry storage system for spent fuel generated from CANDU reactors. The silo is designed to remove passively the decay heat from spent fuel, as well as to secure the integrity of spent fuel during storage period. Dominant heat transfer mechanisms must be characterized and validated for the thermal analysis model of the silo, and the temperature history along storage period could be determined by using the validated thermal analysis model. Heat transfer characteristics on the interior and exterior of fuel basket in the silo were assessed to determine the temperature history of silo, which is necessary for evaluating the long-term degradation behavior of CANDU spent fuel stored in the silo. Also a methodology to evaluate the temperature history during dry storage period was proposed in this study. A CFD model of fuel basket including fuel bundles was suggested and temperature difference correlation between fuel bundles and silo’s internal member, as a function of decay heat of fuel basket considering natural convection and radiation heat transfer, was deduced. Temperature difference between silo’s internal cavity and ambient air was determined by using a concept of thermal resistance, which was validated by CFD analysis. Fuel temperature was expressed as a function of ambient temperature and decay heat of fuel basket in the correlation, and fuel temperature along storage period was determined. Therefore, it could be used to assess the degradation behavior of spent fuel by applying the degradation mechanism expressed as a function of spent fuel

  11. The impact of silo mentality on team identity: An organisational case study

    Directory of Open Access Journals (Sweden)

    Frans Cilliers

    2012-03-01

    Research purpose: The purpose of this research was to describe how the silo mentality impacts on team identity. Motivation for the study: During a recent organisational consultation the researchers realised that a so-called silo phenomenon had much more unexplained unconscious behaviour than was traditionally realised in terms of organisational development. It is hoped that findings from this qualitative study could give consultants entry into what happens below the surface in the silos’ unconscious. Research design, approach and method: A qualitative and descriptive research design using a case study strategy was used. Data gathering consisted of 25 narrative interviews. Using discourse analysis four themes manifested, integrated into four working hypotheses and a research hypothesis. Trustworthiness and ethical standards were ensured. Main findings: Themes that emerged were the physical environment and structure, intra-group relations, experiences of management, and intergroup relations. Practical/managerial implications: Consulting on silo behaviour as physical structures only may not be successful in changing organisational behaviour. The silo resembles an iceberg – the largest part is below the surface. Contribution/value-add: The findings evidenced silo behaviour to be an unconscious phenomenon influencing team identity negatively. Consultants are urged to study these manifestations towards understanding silos and their effect on team identity better.

  12. Prevenção da transmissão vertical do HIV: atitude dos obstetras em Salvador, Brasil Prevention of HIV vertical transmission: obstetricians'atitude in Salvador, Brasil

    Directory of Open Access Journals (Sweden)

    João Paulo Queiroz Farias

    2008-03-01

    Full Text Available OBJETIVO: avaliar as atitudes e conhecimento dos obstetras das maternidades públicas da cidade de Salvador (MPS sobre as recomendações do Ministério da Saúde para a profilaxia da transmissão vertical do vírus humano da imunodeficiência (HIV e terapia antiretroviral em gestantes. Avaliou-se também a influência das condições de trabalho, disponibilidade da testagem rápida e da terapia antiretroviral em relação à aplicação destas recomendações. MÉTODOS: realizou-se um estudo de corte transversal entre agosto e novembro de 2005, envolvendo 129/152 (85% dos obstetras de todas as MPS. Utilizou-se como instrumento um questionário anônimo, estruturado e auto-explicativo, com questões sobre as características da população, condições de trabalho e disponibilidade de insumos, conhecimento e atitudes relacionadas ao aconselhamento e testagem para o HIV e condutas com as pacientes (uso da zidovudina (AZT, reconhecimento de fatores de risco, escolha e manejo da via de parto e cuidados no puerpério. RESULTADOS: dos obstetras, 69% referiram conhecer integralmente as recomendações do Ministério da Saúde; 90,7% concordaram com a solicitação compulsória da testagem rápida para o HIV; 63,6% escolheram a cesariana para via de parto; 38% contra-indicaram o parto por via vaginal; 37,5% recomendaram isolamento das pacientes soropositivas e 58,1% indicaram laqueadura tubária. A maioria (90% dos sujeitos referiram a existência de fatores prejudiciais à aplicabilidade das recomendações, sendo que os mais apontados foram a realização inadequada e a indisponibilidade das informações do pré-natal na admissão. Embora a testagem rápida estivesse disponível, apenas um terço dos entrevistados afirmou que o resultado estava sempre disponível em tempo hábil. CONCLUSÕES: algumas atitudes relacionadas à assistência à gestante com HIV foram discordantes das recomendações do Ministério da Saúde. Na opinião dos

  13. The simultaneous discharge of liquid and grains from a silo

    Science.gov (United States)

    Cervantes-Álvarez, A. M.; Hidalgo-Caballero, S.; Pacheco-Vázquez, F.

    2018-04-01

    The flow rate of water through an orifice at the bottom of a container depends on the hydrostatic pressure whereas for a dry granular material it is nearly constant. But what happens during the simultaneous discharge of grains and liquid from a silo? By measuring the flow rate as a function of time, we found that (i) different regimes appear, going from the constant flow rate to a hydrostatic-like discharge depending on the aperture size and grain diameter, (ii) the mixed material is always discharged faster than dry grains but slower than liquid, (iii) for the mixture, the liquid level drops faster than the grain level, but they are always linearly proportional to one another, and (iv) a sudden growth in the flow rate happens during the transition from a biphasic discharge to a single phase discharge. These results are associated to the competition between the decrease in hydrostatic pressure above the granular bed and the hydrodynamic resistance. A model combining Darcy's law with Bernoulli and mass conservation equations is proposed, and the numerical results are in good agreement with experiments.

  14. Creating value: unifying silos into public health business intelligence.

    Science.gov (United States)

    Davidson, Arthur J

    2014-01-01

    Through September 2014, federal investments in health information technology have been unprecedented, with more than 25 billion dollars in incentive funds distributed to eligible hospitals and providers. Over 85 percent of eligible United States hospitals and 60 percent of eligible providers have used certified electronic health record (EHR) technology and received Meaningful Use incentive funds (HITECH Act1). Certified EHR technology could create new public health (PH) value through novel and rapidly evolving data-use opportunities, never before experienced by PH. The long-standing "silo" approach to funding has fragmented PH programs and departments,2 but the components for integrated business intelligence (i.e., tools and applications to help users make informed decisions) and maximally reuse data are available now. Challenges faced by PH agencies on the road to integration are plentiful, but an emphasis on PH systems and services research (PHSSR) may identify gaps and solutions for the PH community to address. Technology and system approaches to leverage this information explosion to support a transformed health care system and population health are proposed. By optimizing this information opportunity, PH can play a greater role in the learning health system.

  15. Transmissão vertical do HIV: situação encontrada em uma maternidade de Teresina Transmisión vertical del HIV: situación encontrada en una maternidade de Teresina Vertical transmission of HIV: situation found in a maternity of Teresina

    Directory of Open Access Journals (Sweden)

    Liliam Mendes de Araújo

    2007-08-01

    Full Text Available Oaumento dos casos de AIDS em mulheres evidencia um progressivo aumento da transmissão vertical do HIV, no Brasil e no Piauí. Considerando a relevância do tema o presente estudo teve como objetivo analisar as condições da implementação das normas e medidas recomendadas pelo Ministério da Saúde para prevenir a transmissão vertical do HIV em uma maternidade de Teresina - PI. O caminho teórico-metodológico compreendeu o estudo da dinâmica organizacional e dos seus atores, por meio de abordagem qualitativa. Para obtenção dos dados foram realizadas 17 entrevistas semi-estruturadas. Os resultados mostraram que as recomendações do Ministério da Saúde não foram atendidas na sua totalidade evidenciando a precariedade da assistência prestada para o binômio mãe/filho.El aumento de los casos de AIDS en mujeres, evidencia un progresivo aumento de la transmisión vertical de lo HIV en el Brasil, e en el Piauí. Considerando la relevancia del tema, el presente estudio tuve como objetivo analizar las condiciones de la implementación de las reglas y medidas recomendadas por el Ministerio de la Salud para prevenir la transmisión vertical del HIV en una maternidad de Teresina-PI. El camino teórico-metodológico comprendió el estudio de la dinámica organizacional y de sus actores, a través del abordaje cualitativa.. Para la obtención de los datos fueran realizados 17 entrevistas medio-estructuradas. Los resultados mostraran que las recomendaciones del Ministerio de la Salud non fueran atendidas en la suya totalidad, evidenciando la precariedad de la asistencia prestada, para el binomio madre / hijo.The increase of the number of cases of AIDS among women reveals a progressive increase of the vertical transmission of HIV in Brazil, as well as in Piauí. Considering the relevance of the subject, this study had as objective to analyze the conditions of the implementation of the rules and measures recommended by the Ministry of Health to

  16. Implementing 10 CFR 830 at the FEMP Silos: Nuclear Health and Safety Plans as Documented Safety Analysis

    International Nuclear Information System (INIS)

    Fisk, Patricia; Rutherford, Lavon

    2003-01-01

    The objective of the Silos Project at the Fernald Closure Project (FCP) is to safely remediate high-grade uranium ore residues (Silos 1 and 2) and metal oxide residues (Silo 3). The evolution of Documented Safety Analyses (DSAs) for these facilities has reflected the changes in remediation processes. The final stage in silos DSAs is an interpretation of 10 CFR 830 Safe Harbor Requirements that combines a Health and Safety Plan with nuclear safety requirements. This paper will address the development of a Nuclear Health and Safety Plan, or N-HASP

  17. Climatologia da estrutura vertical da atmosfera em novembro para Belém-PA Climatology of the atmospheric vertical structure over the Belém-PA city during november

    Directory of Open Access Journals (Sweden)

    Daniela dos Santos Ananias

    2010-06-01

    Full Text Available Usando um conjunto de dados para um período de 26 anos (1982 a 2007, este trabalho apresentou um estudo diagnóstico sobre a estrutura vertical da temperatura do ar, temperatura do ponto de orvalho e umidade relativa sobre a região de Belém-PA, durante o mês de novembro. As análises foram conduzidas para duas composições contrastantes no que se refere ao regime de precipitação: a composição dos anos chuvosos e a composição dos anos secos, as quais foram estabelecidas objetivamente pelo método dos percentis. Os resultados apresentados permitiram concluir que a principal diferença observada nos perfis de temperatura e umidade atmosférica, comparando-se os perfis dos anos chuvosos e secos, ocorre na camada atmosférica entre os médios e altos níveis da troposfera (entre os níveis padrões de 700 hPa e 400 hPa. Nesta camada, a diferença entre as temperaturas do ar e do ponto de orvalho é significativamente maior e o contraste de umidade associado à convecção também apresenta os maiores valores. Em geral, as composições demonstraram que os perfis de temperatura anomalamente mais quente (frio e os de umidade anomalamente mais úmido (seco associam-se aos anos com registro de chuva acima (abaixo do normal na região de Belém.The present work reports a diagnostic study on the vertical structure of air temperature, dew point temperature and relative humidity over the region of Belém-PA (eastern Amazon, based on monthly dataset for a period of 26 years (1982 to 2007. The focus is on the transition period from dry to wet season in the eastern Amazon, i.e., the month of November. Two contrasting composites in relation to the rainfall regime were considered: the wet and the dry year's composites, which were established objectively by the percentiles method. The results showed that the main difference observed in the temperature and humidity profiles, comparing dry and wet years, occurs in the atmospheric layer between the middle

  18. Cleanup Progress on High Hazard Legacy Facilities at Sellafield: Pile Fuel Cladding Silo

    International Nuclear Information System (INIS)

    Skilbeck, D.

    2006-01-01

    This facility was constructed in the 1940's as the original dry storage silo for Intermediate Level Waste (ILW) arising from the Windscale Pile Reactors. Subsequently it was used as the main storage facility for all ILW arising from the Sellafield operation. It was operated until it became full and the Magnox Swarf Storage Silos were constructed in the mid 1960's. A systematic and As Low As Reasonably Practicable (ALARP) risk reduction approach has been adopted at Sellafield to address issues in order of risk magnitude. Prior to being in a position to retrieve stored wastes it has been necessary to improve the overall safety performance of the silo. This has involved installing new fire prevention systems, improving structural integrity, clearing waste from the Transfer Tunnel, and improving overall seismic performance. A major step towards reducing the overall risk profile of this facility has been to seal the six charge holes in the Transfer Tunnel, that were used for tipping the waste into the silo compartments during operations. This also enabled the silo Transfer Tunnel to be removed. Overall this work has proved that significant cleanup can be performed safely and successfully, in one of the most hazardous environments at Sellafield. (authors)

  19. Estimate of induced stress during filling and discharge of metallic silos for cement storage

    Directory of Open Access Journals (Sweden)

    Wilmer Bayona-Carvajal

    2015-01-01

    Full Text Available El presente artículo describe el análisis estructural realizado a un silo metálico que almacena cemento por medio de un modelo paramétrico desarrollado en el software de elementos finitos ANSYS APDL, las presiones de llenado y vaciado que el material ejerce sobre las paredes del silo se determinan basados en la normativa del Eurocódigo EN 1991-4. El modelo se realiza con elementos tipos cáscara permitiendo que su estructura se ajuste que la geometría cilíndrica y cónica del silo. Se explica cada una de las fases involucradas en el desarrollo del modelo y se hace un análisis detallado de los resultados arrojados por el software, se evalúan diferentes modelos variando los espesores de lámina con el fin de seleccionar el más adecuado. También se analizan los resultados obtenidos cuando la tolva del silo cambia su ángulo de inclinación y se revisa el comportamiento que tiene el silo cuando es analizado en conjunto con su estructura soporte.

  20. In-situ grouting of the low-level radioactive waste disposal silos at ORNL's Solid Waste Storage Area Six

    International Nuclear Information System (INIS)

    Francis, C.W.; Farmer, C.D.; Stansfield, R.G.

    1993-07-01

    At Oak Ridge National Laboratory (ORNL), one method of solid low-level radioactive waste disposal has been disposed of in below-grade cylindrical concrete silos. Located in Solid Waste Storage Area 6 (SWSA 6), each silo measures 8 ft in diameter and 20 ft deep. Present day operations involve loading the silos with low-level radioactive waste and grouting the remaining void space with a particulate grout of low viscosity. Initial operations involving the disposal of wastes into the below-grade silos did not include the grouting process. Grouting was stated as a standard practice (in late 1988) after discovering that ∼75% of the silos accumulated water in the bottom of the silos in the ∼2 years after capping. Silo water (leachate) contained a wide range of types and concentrations of radionuclides. The migration of contaminated leachate out of the silo into adjoining soil and groundwater was considered to be a serious environmental concern. This report describes how a specially designed particulate-base grout was used to grout 54 silos previously filled with low-level radioactive waste. Grouting involved three steps: (1) silo preparation, (2) formulation and preparation of the grout mixture, and (3) injection of the grout into the silos. Thirty-five of the 54 silos grouted were equipped with a 3-in.-diam Polyvinyl Chloride (PVC) pipe used to monitor water levels in the silos. A method for rupturing the bottom section of these PVC wells was developed so that grout could be pumped to the bottom of those silos. Holes (2-in. diam) were drilled through the ∼18 in. thick concrete to fill the remaining 19 wells without the PVC monitoring wells. The formulation of grout injected into the silos was based on a Portland Type I cement, flyash, sand, and silica fume admixture. Compressive strength of grout delivered to SWSA6 during grouting operations averaged 1,808 lb/in 2 with a bulk density of 3,549 lb/yd 3

  1. Simulation study of the discharge characteristics of silos with cohesive particles

    Science.gov (United States)

    Hund, David; Weis, Dominik; Hesse, Robert; Antonyuk, Sergiy

    2017-06-01

    In many industrial applications the silo for bulk materials is an important part of an overall process. Silos are used for instance to buffer intermediate products to ensure a continuous supply for the next process step. This study deals with the discharging behaviour of silos containing cohesive bulk solids with particle sizes in the range of 100-500 μm. In this contribution the TOMAS [1,2] model developed for stationary and non-stationary discharging of a convergent hopper is verified with experiments and simulations using the Discrete Element Method. Moreover the influence of the cohesion of the bulk solids on the discharge behaviour is analysed by the simulation. The simulation results showed a qualitative agreement with the analytical model of TOMAS.

  2. Systemic model for the aid for operating of the reactor Siloe

    International Nuclear Information System (INIS)

    Royer, J.C.; Moulin, V.; Monge, F.

    1995-01-01

    The Service of the Reactor Siloe (CEA/DRN/DRE/SRS), fully aware of the abilities and knowledge of his teams in the field of research reactor operating, has undertaken a project of knowledge engineering in this domain. The following aims have been defined: knowledge capitalization for the installation in order to insure its perenniality and valorization, elaboration of a project for the aid of the reactor operators. This article deals with the different actions by the SRS to reach the aims: realization of a technical model for the operation of the Siloe reactor, development of a knowledge-based system for the aid for operating. These actions based on a knowledge engineering methodology, SAGACE, and using industrial tools will lead to an amelioration of the security and the operating of the Siloe reactor. (authors). 13 refs., 7 figs

  3. Respostas neuromusculares dos membros inferiores durante protocolo intermitente de saltos verticais em voleibolistas Neuromuscular responses of the lower limb muscles during vertical jumping in volleyball athletes

    Directory of Open Access Journals (Sweden)

    Caroline Tosini Felicissimo

    2012-03-01

    Full Text Available O objetivo deste estudo foi analisar o desempenho e as respostas eletromiográficas dos músculos Reto Femoral, Bíceps Femoral e Gastrocnêmio Medial durante protocolo de saltos verticais. Participaram 13 voleibolistas do sexo feminino (15,6 ± 0,9 anos. Inicialmente foi realizado um protocolo de potência máxima (três saltos máximos, seguido do protocolo de resistência de saltos (ciclos de três saltos máximos em aproximadamente 10 segundos (s - um salto a cada três s, com recuperação de 15 s. O tempo de duração do protocolo de resistência foi de 20 minutos. Foi usada a técnica do salto com contramovimento sem ajuda dos braços, sobre tapete de contato. Para tratamento dos dados os saltos foram divididos em quatro períodos com 12 ciclos cada um. Os resultados mostraram queda na altura dos saltos de aproximadamente 1,3cm entre os períodos de 1 a 4, sendo que, essa queda foi mais significativa nos 3º e 4º períodos em comparação ao 1º e 2º. Entretanto, com relação às variáveis RMS e FM, não ocorreu alteração nas respostas eletromiográficas entre músculos e períodos. Concluiu-se, assim, que a fadiga pode depender de variáveis psicofisiológicas, ao nível do SNC, que também influem no desempenho.The purpose of this study was to analyze the performance and the electromyographic responses of the muscles Rectus Femoris, Biceps Femoris and Gastrocnemius Medialis during vertical jumping protocol. Participated 13 female volleyball players (15,6 ± 0,9 years. Initially was performed a protocol of maximum power (three maximum jumps, followed by resistance jumps protocol (cycles of three maximum jumps in about 10 seconds (s - one jump every three s, with recovery of 15s. The duration of resistance protocol was 20 minutes. Technique used was countermovement jump without the aid of arms on a mat of contact. The data collected during the jumps were divided into four periods containing 12 cycles each. The results showed a

  4. Should the scope of human mixture risk assessment span legislative/regulatory silos for chemicals?

    Science.gov (United States)

    Evans, Richard M; Martin, Olwenn V; Faust, Michael; Kortenkamp, Andreas

    2016-02-01

    Current chemicals regulation operates almost exclusively on a chemical-by-chemical basis, however there is concern that this approach may not be sufficiently protective if two or more chemicals have the same toxic effect. Humans are indisputably exposed to more than one chemical at a time, for example to the multiple chemicals found in food, air and drinking water, and in household and consumer products, and in cosmetics. Assessment of cumulative risk to human health and/or the environment from multiple chemicals and routes can be done in a mixture risk assessment (MRA). Whilst there is a broad consensus on the basic science of mixture toxicology, the path to regulatory implementation of MRA within chemical risk assessment is less clear. In this discussion piece we pose an open question: should the scope of human MRA cross legislative remits or 'silos'? We define silos as, for instance, legislation that defines risk assessment practice for a subset of chemicals, usually on the basis of substance/product, media or process orientation. Currently any form of legal mandate for human MRA in the EU is limited to only a few pieces of legislation. We describe two lines of evidence, illustrated with selected examples, that are particularly pertinent to this question: 1) evidence that mixture effects have been shown for chemicals regulated in different silos and 2) evidence that humans are co-exposed to chemicals from different silos. We substantiate the position that, because there is no reason why chemicals allocated to specific regulatory silos would have non-overlapping risk profiles, then there is also no reason to expect that MRA limited only to chemicals within one silo can fully capture the risk that may be present to human consumers. Finally, we discuss possible options for implementation of MRA and we hope to prompt wider discussion of this issue. Copyright © 2015 The Authors. Published by Elsevier B.V. All rights reserved.

  5. Numerical simulations in granular matter: The discharge of a 2D silo

    Indian Academy of Sciences (India)

    ... short and elementary review of numerical simulations in granular assemblies, giving the process of discharge of a 2D silo as an example. The strengths and limitations of different approaches are discussed, together with some comments on the specific issues related to the numerics of discontinuous dissipative collisions.

  6. Dry matter losses of grass, lucerne and maize silages in bunker silos

    Directory of Open Access Journals (Sweden)

    Brigitte Koehler

    2013-03-01

    Full Text Available An efficient feed management is important for a sustainable and economic agricultural production. One of the main points for improving the efficiency is the reduction of feed losses. In the present investigation the dry matter (DM losses of grass, lucerne and maize silages in farm scaled bunker silos were analysed. The method of determining DM losses was the total-in versus total-out DM mass flow of the silos, including the determination of DM content and other silage parameters via manual sampling. The results taken from 48 silos showed on average for all investigated crops 9–12% of DM losses. Density and feed out rate showed a negative correlation to DM losses in maize silages. According to the applied method for determining DM losses on farm scale, a guideline of 8% can be suggested for maximum DM losses in bunker silos for grass and maize silages. The described method seems to be applicable for improving the feed management by using largely automated measurements on the harvest and feeding side.

  7. Who's worried about turkeys? How 'organisational silos' impede zoonotic disease surveillance.

    Science.gov (United States)

    Jerolmack, Colin

    2013-02-01

    Though emerging infectious diseases ignore boundaries between species, the agencies that respond to them do not. Based on interviews with state and federal epidemiologists, veterinarians, and physicians and on case studies of disease events, this article examines how the jurisdictional and cultural divides that exist among human and animal health agencies hinder efforts to successfully contain species-jumping diseases (zoonoses). I argue that newly emergent zoonoses make these agencies' organisational cultures function as silos because the institutionalised thinking and practices developed to address the diseases that traditionally concerned each agency constrain members from building the inter-organisational bridges required to manage the latest 'hybrid' diseases. The silo effect is evident both across the human-animal health divide and within the landscape of animal health, as agencies that monitor livestock and wildlife follow distinct and sometimes competing agendas. The article also touches on moments of inter-agency cooperation in order to specify how health practitioners can begin making connections between 'organisational silos'. This article encourages sociologists of health to explore the crucial link between animal and human health; and it introduces the concept of organisational silos to capture the relational dilemmas that arise when a 'hybrid' problem systemically links agencies with disparate organisational cultures. © 2012 The Author. Sociology of Health & Illness © 2012 Foundation for the Sociology of Health & Illness/Blackwell Publishing Ltd.

  8. SIMULATION OF A MATHEMATICAL MODEL FOR THE TEMPERATURE PROFILE IN A SILO BAG FOR BEAN

    Directory of Open Access Journals (Sweden)

    M. R. Hauth

    2015-02-01

    Full Text Available The problems encountered with storage of agricultural products has warranted studies related to finding alternative methods of grain storage, thereby avoiding unnecessary losses. Stored grain deteriorates quickly at high temperatures. The moisture content of the grain influences the respiratory process; therefore, when at the recommended humidity of between 11 and 13%, this rate remains low, it prolongs maintenance of the product quality. The silo bag being airtight enables the grain mass to consume the entire internal O2 purse within it, and in that low or absent oxygen environment the grain mass saturates the CO2 atmosphere, inhibiting the multiplication of insects and fungi, thus providing a controlled environment. This study aims at simulating, using Computational Fluid Dynamics (CFD, the time it would take for the entire grain mass contained in a silo bag to reach thermal equilibrium with the environment and analyzes the feasibility of the technique employed here. The simulations were performed based on the data of the average air temperature in the region at each harvest time and the average storage temperature of the bean mass (60°C. The results obtained from the simulations reveal that after one month of silo storage the entire bag remains in thermal stabilization, and four months later when it hits the entire mass, all the beans are in thermal equilibrium. Therefore, maintaining stable temperature and humidity within the recommended silo bag preserves the grain quality well.

  9. Magnox Swarf Storage Silo Liquor Effluent Management -Sellafield Site, Cumbria, UK - Legacy radioactive waste storage - 59271

    International Nuclear Information System (INIS)

    Le Clere, Stephen

    2012-01-01

    The Sellafield Magnox Swarf Storage Silo (MSSS) was constructed to provide an underwater storage facility for irradiated magnox cladding metal Swarf, as well as miscellaneous beta-gamma waste from several sources. Liquid effluent arisings from hazard reduction activities at this facility represent the toughest effluent treatment challenge within the company's Legacy Ponds and Silos portfolio. The key requirement for hazard reduction has generated many substantial challenges as the facility is readied for decommissioning. This has demanded the production of carefully thought out strategies for managing, and overcoming, the key difficulties to be encountered as hazard reduction progresses. The complexity associated with preparing for waste retrievals from the Magnox Swarf Storage Silo, has also generated the demand for a mix of creativity and perseverance to meet the challenges and make progress. Challenging the status quo and willingness to accept change is not easy and the road to overall hazard reduction for the high hazard MSSS facility will demand the skills and investment of individuals, teams, and entire facility work-forces. The first steps on this road have been taken with the successful introduction of liquor management operations, however much more is yet to be achieved. Clear communication, investing in stakeholder management, perseverance in the face of difficulty and a structured yet flexible programme delivery approach, will ensure the continued success of tackling the complex challenges of treating liquid effluent from a legacy fuel storage silo at the Sellafield Site. (authors)

  10. Breaking down IT silos: a "connected" way to improve customer experience and the bottom line.

    Science.gov (United States)

    Hallowell, Bruce; Turisco, Frances

    2009-03-01

    Hospitals can provide customer service like Amazon.com without purchasing new technology. Making technology interactive requires sharing patient data across applications and enhancing existing IT with decision support. Breaking down technology silos between hospital and outpatient care provider systems significantly improves efficiency, lowers costs, and speeds care delivery.

  11. Silo effect a prominence factor to decrease efficiency of pharmaceutical industry.

    Science.gov (United States)

    Vatanpour, Hossein; Khorramnia, Atoosa; Forutan, Naghmeh

    2013-01-01

    To be sure, all the industries try to be involved in globalization with a constant trend to find out ways to increase productivity across different functions within an organization to maintain competitive advantage world. Pharmaceutical industries are not exceptional and further are based on fragmentation. So these kind of companies need to cope with several barriers such as silo mentality that may affect efficiency of their business activity. Due to eliminate a part of resources such as raw materials, new molecule developed, financial and human resources and so on, companies can gradually loss their competitive potentials in the market and increase their expenses. Furthermore, to avoid any business disturbances in financially connected companies due to silo effect, they should arrange their management to integrated organization form. Otherwise, actions taken by one business member of the chain can influence the profitability of all the other members in the chain. That is why recently supply chain has generated much interest in many business units. In this paper, it has been tried to investigate the different aspects of silo effect which can affect integrate supply chain. Finally, a fluent communication, high level of information exchange, fragmentation management, cross-functional control in a supply chain management format are needed to reduce or control silo effect within entire chain of the holding company by Supply chain management.

  12. Dealing with Organizational Silos with Communities of Practice and Human Resource Management

    Science.gov (United States)

    Forsten-Astikainen, Riitta; Hurmelinna-Laukkanen, Pia; Lämsä, Tuija; Heilmann, Pia; Hyrkäs, Elina

    2017-01-01

    Purpose: Organizational silos that build on the existing organizational structures are often considered to have negative effects in the form of focus on private narrow objectives and organizational fragmentation. To avoid such harmful outcomes, competence management is called for, and in this, the human resources (HR) function takes a key role.…

  13. How to Move Away from the Silos of Business Management Education?

    Science.gov (United States)

    Nisula, Karoliina; Pekkola, Samuli

    2018-01-01

    Business management education is criticized for being too theoretical and fractional. Despite the numerous efforts to build integrated and experiential business curricula, learning is still organized in disciplinary silos. The curriculum integration efforts are carried out in separate sections of the curriculum rather than the core. There are…

  14. FEM investigation of concrete silos damaged and reinforced externally with CFRP

    Science.gov (United States)

    Kermiche, Sihem; Boussaid, Ouzine; Redjel, Bachir; Amirat, Abdelaziz

    2018-03-01

    The present work investigates the reinforcement of concrete wheat-grain silos under initial damage. The reinforcement is achieved by mounting bands of carbon fiber reinforced polymer (CFRP) on the external walls of the silo. 4 modes of reinforcement are adapted according to the width of the band, the gap between two bands, the height of reinforcement and the number of layers achieved through banding. Analytical analyses were conducted using the Reimbert method and the Eurocode 1 Part 4 method, as well as numerically through the finite element software Abaqus. Results show that the normal pressure reaches a peak value when approaching the silo hopper. Initial damage in a concrete silo was first determined using a 3D geometrical model, while the damage analyses were conducted to optimize the CFRP reinforcement by mounting 2 CFRP bands close together above and below the cylinder-hopper joint. Increasing the number of banding layers could produce better performance as the damage was slightly decreased from 0.161 to 0.152 for 1 and 4 layers respectively.

  15. Bloqueio do plexo braquial, por via infraclavicular vertical, em paciente com doença pulmonar obstrutiva crônica: relato de caso Bloqueo del plexo braquial, por vía infraclavicular vertical, en paciente con enfermedad pulmonar obstructiva crónica: relato de caso Infraclavicular vertical brachial plexus blockade in patients with chronic obstructive pulmonary disease: case report

    Directory of Open Access Journals (Sweden)

    Diogo Brüggemann da Conceição

    2006-10-01

    Full Text Available JUSTIFICATIVA E OBJETIVOS: Os pacientes com doença pulmonar obstrutiva crônica (DPOC têm risco aumentado de complicações pós-operatórias, sobretudo quando submetidos à anestesia geral. O bloqueio do plexo braquial representa uma alternativa para estes pacientes em intervenções cirúrgicas de membros superiores. O objetivo deste relato foi apresentar um caso de bloqueio do plexo braquial, por via infraclavicular vertical em paciente com DPOC com fratura de cotovelo. RELATO DO CASO: Paciente do sexo feminino, 67 anos, 52 kg, estado físico ASA III, com indicação de osteossíntese de cotovelo, portadora de bronquiectasias desde nove anos de idade após uma pneumonia. Apresentava tosse produtiva habitualmente, e fora submetida à avaliação de seu pneumologista que a liberou para o procedimento. Após instalação de monitorização com pressão arterial não-invasiva, ECG e oxímetro de pulso, foi realizado bloqueio do plexo braquial por via infraclavicular vertical com 30 mL de ropivacaína a 0,5%. A intervenção cirúrgica foi realizada sem intercorrências. A paciente recebeu alta hospitalar no dia seguinte ao procedimento cirúrgico. CONCLUSÕES: O bloqueio do plexo braquial por via infraclavicular vertical é uma técnica alternativa para portadores de DPOC e fratura de cotovelo, por sua menor morbidade quando comparado com a anestesia geral e com a via supraclavicular.JUSTIFICATIVA Y OBJETIVOS: Los pacientes con enfermedad pulmonar obstructiva crónica (DPOC presentan riesgo mayor de complicaciones postoperatorias especialmente cuando se les someten a la anestesia general. El bloqueo del plexo braquial representa una alternativa para esos pacientes en intervenciones quirúrgicas de miembros superiores. El objetivo de este relato fue el de presentar un caso de bloqueo del plexo braquial, por vía infraclavicular vertical en paciente con DPOC con fractura de codo. RELATO DEL CASO: Paciente del sexo femenino, 67 años, 52 kg

  16. Prevalência de HIV em gestantes e transmissão vertical segundo perfil socioeconômico, Vitória, ES Factores asociados a recidiva en hanseníasis en Mato Grosso, Centro-oeste de Brasil HIV prevalence in pregnant women and vertical transmission in according to socioeconomic status, Southeastern Brazil

    Directory of Open Access Journals (Sweden)

    Anne Caroline Barbosa Cerqueira Vieira

    2011-08-01

    Full Text Available OBJETIVO: Descrever a prevalência de infecção por HIV em gestantes e a taxa de transmissão vertical, segundo o perfil socioeconômico dos bairros de residência das mães. MÉTODOS: Estudo ecológico exploratório utilizando a base de dados do Sistema de Informação de Agravos de Notificação de gestantes HIV-positivas e aids em crianças notificadas entre 2000 e 2006 em Vitória, ES. Para análise das informações socioeconômicas foi utilizado o Índice de Qualidade Urbana. A prevalência de HIV em gestantes e a taxa de transmissão vertical foram calculadas. A distribuição espacial dos casos foi realizada no programa Terraview 3.2.0. Para verificar a associação entre a qualidade urbana e a prevalência de HIV em gestantes utilizou-se o modelo de regressão de Poisson. RESULTADOS: Um total de 137 gestantes e 14 crianças infectadas por transmissão vertical foi notificado no período. Sete crianças correspondiam a mães HIV-positivas sem notificação de caso no período analisado. A prevalência de infecção em gestantes no período foi de 0,44% e a taxa de transmissão vertical foi de 9,7%. CONCLUSÕES: A prevalência de infecção por HIV em gestantes e a transmissão vertical associam-se à qualidade urbana do bairro de residência, indicando que os bairros com menor qualidade urbana devem ser priorizados quanto às ações para redução da transmissão vertical.OBJETIVO: Analizar factores asociados a la ocurrencia de recidiva en hanseníasis. MÉTODOS: Estudio retrospectivo caso-control con 159 pacientes mayores de 15 años diagnosticados con hanseníasis en cinco municipios del Estado de Mato Grosso, Centro-oeste de Brasil, cuyas unidades de salud eran consideradas de referencia para el atendimiento. El grupo de casos incluyó 53 individuos con recidiva de 2005 a 2007 y fue comparado con el grupo control (106 con alta por cura en 2005, pareados por sexo y clasificación operacional. Se usaron datos del Sistema de Informaci

  17. Modelo para simulação da dinâmica de nitrato em colunas verticais de solo não saturado A simulation model of nitrate displacement in vertical columns in a non-saturated soil

    Directory of Open Access Journals (Sweden)

    Jarbas H. de Miranda

    2002-01-01

    Full Text Available A agricultura intensiva está sempre em busca de incrementos de produtividade mas, em contrapartida, pouca atenção é dedicada a possíveis impactos ambientais. Portanto, o entendimento sobre processos de transporte de solutos no solo auxilia na redução da sua lixiviação para as camadas subsuperficiais. Neste sentido, objetivou-se, com o presente trabalho, desenvolver e avaliar um modelo computacional aplicado para simulação da dinâmica de solutos no solo por meio de soluções numéricas de equações diferenciais que descrevam esse transporte. Pelos resultados obtidos, o modelo apresentou bom ajuste das concentrações de nitrato e dos perfis de umidade, simulados com relação aos medidos em condições de laboratório em coluna vertical de solo não saturado.Intensive agriculture always aims at increased productivity, with limited or no attention dedicated to possible impacts on the environment. Therefore, the understanding of processes of solute transport in the soil contributes to reduction of leaching to the deep layers. In this connection, the present study had the objective of developing and evaluating a computational model for solute displacement simulation in the soil based on numerical solutions of differential equations describing this displacement. From the results obtained, the model presented a good agreement of nitrate concentrations as well as soil moisture profile when compared with the results obtained on a vertical column of non-saturated soil under laboratory conditions.

  18. Moisture profile measurements of concrete samples in vertical flow by gamma ray attenuation method. Medidas do perfil de umidade de amostras de concreto em infiltracao vertical, atraves da atenuacao de raios gama

    Energy Technology Data Exchange (ETDEWEB)

    Appoloni, C R; Nardocci, A C; Obuti, M M [Universidade Estadual de Londrina, PR (Brazil). Dept. de Fisica

    1988-04-01

    This work deals with the study of the water diffusion in concrete by the gamma ray attenuation method. The moisture profiles, [theta] (z,t), of the vertical water flow were determined in concrete samples of different trace and porosity. The data were taken with a vertical and horizontal measurement table, a [sup 60] Co gamma ray source, a NaI (T) scintillation detector and the standard gamma ray spectrometry electronic. The [theta] (z,t) data analysis is presented using a phenomenological model of the moisture profile temporal evolution in heterogeneous materials. Two other models, Cell and Sandwich, were also applied to determine the attenuation coefficient of a non-homogeneous media from the attenuation coefficients of the components, taking into account particles-size effects. (author).

  19. Perfil clínico-laboratorial de crianças vivendo com HIV/AIDS por transmissão vertical em uma cidade do Nordeste brasileiro Clinical and laboratory profile of children living with vertically transmitted HIV/AIDS in a city in northeastern Brazily

    Directory of Open Access Journals (Sweden)

    Margareth Jamil Maluf e Silva

    2010-02-01

    Full Text Available INTRODUÇÃO: a transmissão vertical constitui a principal via de infecção infantil pelo vírus HIV-1 (vírus da imunodeficiência humana. A presente pesquisa tem como objetivo estudar a evolução clínica e laboratorial de crianças vivendo com HIV/AIDS decorrente da transmissão vertical. MÉTODOS: trata-se de um estudo descritivo, retrospectivo, realizado a partir da coleta de dados em prontuário médico de todas as crianças atendidas em um Serviço de Assistência Especializada, no período de janeiro de 1998 a junho de 2006. RESULTADOS: foram avaliadas 80 crianças que preencheram critérios de inclusão. Observou-se que em 56 (70% crianças, o diagnóstico da infecção pelo HIV na mãe deu-se após o parto e que em 44 (55% o parto foi via vaginal. Amamentação ao seio materno foi documentada em 56 (70% crianças e esta variou de um mês até mais de 12 meses. A não utilização ou uso incompleto do Protocolo ACTG 076 foi documentado em 63 (78,5% casos. CONCLUSÕES: os dados observados em nosso estudo são bastante preocupantes e revelam falha na assistência materno-infantil, especialmente voltada para prevenção da transmissão.INTRODUCTION: Vertical transmission constitutes the main route for child infection by the HIV-1 virus (human immune deficiency virus. This study aimed to investigate the clinical and laboratory evolution of children with vertically transmitted HIV/AIDS. METHODS: This was a retrospective descriptive study based on data gathered from the medical records of all the children who were seen at a specialized care unit between January 1998 and June 2006. RESULTS: Eighty children who met the inclusion criteria were evaluated. In the cases 56 (70% of the children, their mothers were diagnosed as HIV-positive after childbirth. The delivery was vaginal for 44 (55% of the children. Fifty-six children (70% were breastfed by their mothers for periods ranging from one to more than 12 months. Failure to use or incomplete

  20. Fire and fire extinguishment in silos. An experimental study[Storage of wood fuel pellets]; Brand och brandslaeckning i siloanlaeggningar. En experimentell studie

    Energy Technology Data Exchange (ETDEWEB)

    Persson, Henry; Blomqvist, Per; Zhenghua Yan

    2007-01-15

    A series of four tests have been conducted with wood pellets stored in a reduced size silo. The tests were conducted in order to increase the knowledge on fire development, detection and extinction technique in silo fires. The project originated from a pre-study on the extinction of silo fires made for the Swedish Rescue Service Agency (SRV). The test silo was built of concrete rings, had a diameter of 1 m, and a height of almost 6 m, which gave a volume of 4.4 m{sup 3}. The silo was filled with wood pellets up to a height of 5 m. A local auto ignition was imitated by a coiled heating wire placed in the pellet bulk centrally in the silo and a self sustaining pyrolysis zone was established within one hour. The silo was instrumented with almost 100 thermocouples as a mean to follow the development of the pyrolysis zone and later the efficiency of the extinguishment. Gas analyses were further made, both in the top of the silo, and at four different levels in the pellet bulk. After 30 hours the extinguishment was initiated using nitrogen (N{sub 2}) and carbon dioxide (CO{sub 2}), respectively. The gas was injected into the bottom of the silo. Two tests were also conducted where gas injection was combined foam application in the top of the silo. The tests showed that the pyrolysis zone preferably spreads downwards in the silo, while moisture and pyrolysis gases form a wave that slowly spreads upwards. It was difficult to detect the fire before the main 'gas wave' reached the pellet surface in the silo top, and detection time was about 20 hours in these tests. The spread of the pyrolysis zone, downward, was even slower. The slow development is probably an explanation of why real silo fires often are rather extensive once discovered. Inerting the silo with either nitrogen or carbon dioxide worked out well in the tests. The gas must be in gas phase and slowly introduced into the silo, as close to the bottom as possible. An efficient extinction implies an air

  1. Facility design to apply cover material over radioactive residue in storage silos

    International Nuclear Information System (INIS)

    Fekete, L.J.; Emerson, R.J. Jr.; Heckendorn, L.A.

    1991-01-01

    This paper discusses the BentoGrout application system designed by Parsons under contract to the US Department of Energy (DOE) for the Environmental Remedial Action (ERA) Project, Fernald Environmental Management Project (FEMP) Fernald, Ohio, as cleaned by the K-65 removal action work plan prepared by Theta Technologies, Inc. and Westinghouse Environmental Management Company of Ohio (WEMCO) with the objectives to reduce radon emissions from the silos. The paper discusses support activities undertaken to develop the design basis and design criteria for the K-65 Silos BentoGrout Covering System. The development and execution of an application demonstration program is described with presentation of the results. Also addressed is the design of the full-scale application system and the philosophy of operational control. The instrumentation and monitoring subsystems are illustrated on system schematics. The paper concludes with an evaluation of the above activities in achieving the purpose and objectives set forth in the Removal Action Work Plan

  2. Exerimental study on the water permeability of a reinforced concrete silo for radioactive waste repository

    International Nuclear Information System (INIS)

    Iriya, K.; Itoh, Y.; Hosoda, M.; Fujiwara, A.; Tsuji, Y.

    1992-01-01

    A low permeable conrete structure is required in a shallow land disposal system in order to isolate radioactive waste from the biosphere. Two model silos (7.25 m dia., 5.25 m height, 1.50 m wall thickness) will be constructed to demonstrate the performance of the concrete structure constructed by the two concepts. One concept is called the improved grouting method. We intend to inject cementitious material to the defective zone such as a crack after its construction by an ordinary construction method. The other concept is called the improved constructing method. We intend to minimize the defective zone, which influences the permeability, during the construction by an improved constructing method. The permeability of the concrete structure as a whole structure will be assessed by two large-scale-model-silos until 1992. The design, objectives, and preliminary results of this experiment are mainly described in this paper. (orig.)

  3. Presión en medios granulares en silos: experimentos para un curso de fluidos

    Directory of Open Access Journals (Sweden)

    Saulo Hernández López

    2015-06-01

    Full Text Available Se presentan las experiencias obtenidas en el análisis del comportamiento estático de un medio granular en un silo. Haciendo uso de un dispositivo experimental construido para tal fin, se explora el comportamiento de la presión ejercida sobre el fondo de un silo cuando sobre él descansa una columna de medio granular (maíz sobrecargado y se compara con el de un líquido. Se utiliza el modelo teórico de Janssen para describir el comportamiento de la presión, obteniendo resultados satisfactorios. Este trabajo podrá servir de base en la elaboración de protocolos de prácticas para los laboratorios de los cursos de física clásica que se imparten en los programas de licenciatura en ciencias e ingeniería.

  4. Vitrification of Simulated Fernald K-65 Silo Waste at Low Temperature

    International Nuclear Information System (INIS)

    Jantzen, C.M.; Pickett, J.B.

    1998-01-01

    Vitrification is the technology that has been chosen to solidify approximately 15,500 tons of geologic mill tailings at the Fernald Environmental Management Project (FEMP) in Fernald, Ohio. The geologic mill tailings are residues from the processing of pitchlende ore during 1949-1958. These waste residues are contained in silos in Operable Unit 4 (OU4) at the FEMP facility. Operable Unit 4 is one of five operable units at the FEMP. Operating Unit 4 consists of four concrete storage silos and their contents. Silos 1 and 2 contain K-65 mill tailing residues and a bentonite cap, Silo 3 contains non-radioactive metal oxides, and Silo 4 is empty. The K-65 residues contain radium, uranium, uranium daughter products, and heavy metals such as lead and barium.The K-65 waste leaches lead at greater than 100 times the allowable Environmental Protection Agency (EPA) Resource, Conservation, and Recovery Act (RCRA) concentration limits when tested by the Toxic Characteristic Leaching Procedure (TCLP). Vitrification was chosen by FEMP as the preferred technology for the Silos 1, 2, 3 wastes because the final waste form met the following criteria: controls radon emanation, eliminates the potential for hazardous or radioactive constituents to migrate to the aquifer below FEMP, controls the spread of radioactive particulates, reduces leachability of metals and radiological constituents, reduces volume of final wasteform for disposal, silo waste composition is favorable to vitrification, will meet current and proposed RCRA TCLP leaching criteria Glasses that melt at 1350 degrees C were developed by Pacific Northwest National Laboratory (PNNL) and glasses that melt between 1150-1350 degrees C were developed by the Vitreous State Laboratory (VSL) for the K-65 silo wastes. Both crucible studies and pilot scale vitrification studies were conducted by PNNL and VSL. Subsequently, a Vitrification Pilot Plant (VPP) was constructed at FEMP capable of operating at temperatures up to 1450

  5. Non-linear thermal and structural analysis of a typical spent fuel silo

    International Nuclear Information System (INIS)

    Alvarez, L.M.; Mancini, G.R.; Spina, O.A.F.; Sala, G.; Paglia, F.

    1993-01-01

    A numerical method for the non-linear structural analysis of a typical reinforced concrete spent fuel silo under thermal loads is proposed. The numerical time integration was performed by means of a time explicit axisymmetric finite-difference numerical operator. An analysis was made of influences by heat, viscoelasticity and cracking upon the concrete behaviour between concrete pouring stage and the first period of the silo's normal operation. The following parameters were considered for the heat generation and transmission process: Heat generated during the concrete's hardening stage, Solar radiation effects, Natural convection, Spent-fuel heat generation. For the modelling of the reinforced concrete behaviour, use was made of a simplified formulation of: Visco-elastic effects, Thermal cracking, Steel reinforcement. A comparison between some experimental temperature characteristic values obtained from the numerical integration process and empirical data obtained from a 1:1 scaled prototype was also carried out. (author)

  6. La vida de Santo Domingo de Silos: onirocrítica y semántica

    Directory of Open Access Journals (Sweden)

    González, Javier Roberto

    2007-12-01

    Full Text Available We study the prophetic vision of Santo Domingo de Silos in Gonzalo de Berceo’s Vida de Santo Domingo de Silos, with the aim of: a analysing the text according to categories of prophecy, vision and dream in medieval christian culture; b analysing the configuration of oniric images as an allegorical discourse; c given the limits of allegorical semantics, interpreting those symbolic images characterized by prophetical obscuritas in the light of Grimaldus’ Vita Beati Dominici, source of Berceo’s Vida, and also in the light of medieval tradition of Other World visions and general chromatic an arithmetical symbolism, in order to establish semantic innovations and the proper meanning of Berceo’s text.Estudiamos la visión profética de Santo Domingo de Silos en la Vida de Santo Domingo de Silos de Gonzalo de Berceo, con el objeto de: a analizar el texto según las categorías de profecía, visión y sueño vigentes en la cultura cristiana medieval; b analizar la configuración de las imágenes oníricas como discurso alegórico; c dados los límites de la semántica alegórica, interpretar aquellas imágenes simbólicas caracterizadas por la obscuritas profética a la luz de la Vita Beati Dominici de Grimaldo, fuente de la Vida de Berceo, y también a la luz de la tradición medieval de las visiones de trasmundo y del simbolismo general cromático y aritmético, en orden al establecimiento de las innovaciones semánticas y con ellas del recto sentido del texto de Berceo.

  7. Parametric design of silo steel framework of concrete mixing station based on the finite element method and MATLAB

    Directory of Open Access Journals (Sweden)

    Long Hui

    2016-01-01

    Full Text Available When the structure of the silo steel framework of concrete mixing station is designed, In most cases, the dimension parameters, shape parameters and position parameters of silo steel framework beams are changed as the productivity adjustment of the concrete mixing station, but the structure types of silo steel framework will remain the same. In order to acquire strength of silo steel framework rapidly and efficiently, it is need to provide specialized parametric strength computational software for engineering staff who does not understand the three-dimensional software such as PROE and finite element analysis software. By the finite element methods(FEM, the parametric stress calculation modal of the silo steel framework of concrete mixing station is established, which includes dimension parameters, shape parameters, position parameters and applied load parameters of each beams, and then the parametric calculation program is written with MATLAB. The stress equations reflect the internal relationship between the stress of the silo steel frames with the dimension parameters, shape parameters, position parameters and load parameters. Finally, an example is presented, the calculation results show the stress of all members and the size and location of the maximum stress, which agrees well with realistic cases.

  8. New perspectives on the "silo effect": initial comparisons of network structures across public health collaboratives.

    Science.gov (United States)

    Bevc, Christine A; Retrum, Jessica H; Varda, Danielle M

    2015-04-01

    We explored to what extent "silos" (preferential partnering) persist in interorganizational boundaries despite advances in working across boundaries. We focused on organizational homophily and resulting silo effects within networks that might both facilitate and impede success in public health collaboratives (PHCs). We analyzed data from 162 PHCs with a series of exponential random graph models to determine the influence of uniform and differential homophily among organizations and to identify the propensity for partnerships with similar organizations. The results demonstrated a low presence (8%) of uniform homophily among networks, whereas a greater number (30%) of PHCs contained varying levels of differential homophily by 1 or more types of organization. We noted that the higher frequency among law enforcement, nonprofits, and public health organizations demonstrated a partner preference with similar organizations. Although we identified only a modest occurrence of partner preference in PHCs, overall success in efforts to work across boundaries might be problematic when public health members (often leaders of PHCs) exhibit the tendency to form silos.

  9. Votive deposit or destroyed necropolis?: the protohistoric silo of El Pontarró (La Secuita, Tarragona

    Directory of Open Access Journals (Sweden)

    Maria Carme Belarte

    2017-12-01

    Full Text Available This work analyzes the materials recovered from the silo of ‘El Pontarró’, located in La Secuita (Tarragona, filled with debris dated to the end of the 5th century BC or the beginnings of the 4th century BC. Among them, a number of bronze ornaments and about 6,000 glass beads stand out, together with pottery, spindle whorls, querns, as well as faunal, malacological (mainly Cypraea and archaeobotanical remains. Most elements are rare and related to funerary or ritual practices. This supports the hypothesis that the filling of the silo could correspond to a ritual action, perhaps after the destruction of a necropolis. The accidental discovery of the silo as well as the altered field conditions that for the moment make further archaeological intervention impossible, prevent gaining more information about the context of the deposit. Nevertheless, its contents include the biggest assemblage of glass beads from the Protohistory of the the Iberian Peninsula and are thus.

  10. Experimental study on detection of electrostatic discharges generated by polymer granules inside a metal silo

    Science.gov (United States)

    Choi, Kwangseok; Mogami, Tomofumi; Suzuki, Teruo

    2014-04-01

    To detect electrostatic discharges generated by polymer granules within a metal silo, we developed a novel and simple electrostatic discharge detector that utilizes a photosensor. The novel detector consists of a photosensor module in a metal cylinder, an optical band-pass filter, a quartz glass, a power supply, an amplifier for the photosensor module, and a digital oscilloscope. In this study, we conducted experiments at a real pneumatic powder transport facility that includes a metal silo to evaluate the novel detector using polypropylene granules. To determine the performance of the novel detector, we observed the electrostatic discharge within the metal silo using a conventional image intensifier system. The results obtained from the experiments show that the novel detector worked well in this study. The signals obtained with the novel detector were identical to the electrostatic discharges obtained with the conventional image intensifier system. The greatest advantage of this novel detector is that it is effective even when placed under external lights. In addition, the influence of various optical band-pass filters on the performance of the novel detector was discussed. Our study confirmed that an optical band-pass filter with a center wavelength of λ 330 nm (λ1/2: 315-345 nm) was the best performer among the optical band-pass filters used in this study.

  11. Waste-surface mapping of the Fernald K-65 silos using a structured light measurement system

    International Nuclear Information System (INIS)

    Burks, B.L.; DePiero, F.W.; Dinkins, M.A.; Rowe, J.C.; Selleck, C.B.; Jacoboski, D.L.

    1992-10-01

    A remotely operated surface-mapping measurement system was developed by the Robotics ampersand Process Systems Division at Oak Ridge National Laboratory for use in the K-65 waste-storage silos at Fernald, Ohio. The mapping system used three infrared line-generating laser diodes as illumination sources and three high-resolution, low-lux, calibrated, black-and-white, charge-coupled-device video cameras as receivers. These components were combined to form structured light source range and direction sensors with six different possible emitter-receiver pairs. A technology demonstration and predeployment tests were performed at Fernald using the empty Silo 4 into which was placed rectangular objects of known dimensions. These objects were scanned by the structured light sources to demonstrate functionality and verify that the system was giving sufficiently accurate range data in three dimensions. The structured light sources were deployed in Silos 1 and 2 to scan the waste surfaces. The resulting data were merged to create three-dimensional maps of those surfaces. A bentonite clay cap was placed over the waste surfaces and surface maps were obtained. The change in surface height before and after bentonite addition was utilized as a measure of clay cap thickness

  12. Vertical integration

    International Nuclear Information System (INIS)

    Antill, N.

    1999-01-01

    This paper focuses on the trend in international energy companies towards vertical integration in the gas chain from wellhead to power generation, horizontal integration in refining and marketing businesses, and the search for larger projects with lower upstream costs. The shape of the petroleum industry in the next millennium, the creation of super-major oil companies, and the relationship between size and risk are discussed. The dynamics of vertical integration, present events and future developments are considered. (UK)

  13. Determining the amount of anhydrous alcohol evaporated in vertical cylindrical tanks; Determinacao da quantidade de alcool etilico anidro evaporado em tanques cilindricos verticais

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Elcio Cruz de [TRANSPETRO - PETROBRAS Transporte S.A., Rio de Janeiro, RJ (Brazil)

    2008-07-01

    In order to assess the anhydrous alcohol evaporated amount in vertical cylindrical tanks was developed a calculation methodology based on the rate of mass transfer of the product, the Reynolds number and the mass transfer coefficient. An Excel spreadsheet was prepared with data entry of the tank and physical and chemical properties of the product (temperature and density). For a temperature of 50 deg C, the volume evaporated reaches values of 0.8% by day. (author)

  14. Mapeamento do ambiente térmico de aviários de postura abertos em sistema vertical de criação

    Directory of Open Access Journals (Sweden)

    Diogo J. de R. Coelho

    2015-10-01

    Full Text Available RESUMOObjetivou-se, com este trabalho monitorar, em tempo real, o ambiente térmico de um aviário de postura e realizar o mapeamento completo da distribuição das variáveis temperatura do ar, umidade relativa do ar e índice de temperatura e umidade no alojamento. O trabalho foi conduzido no mês de janeiro de 2013 em uma granja comercial de aves de postura, sistemas verticais, com seis andares de gaiolas. O aviário é totalmente automatizado possuindo 100.000 aves alojadas na densidade de 300 cm2 ave-1. A partir dos dados coletados foram determinadas as médias de temperatura e umidade relativa do ar para período diurno e noturno de diferentes posições na instalação. Os mapas térmicos resultantes demostram que ocorreu uma variabilidade térmica em diferentes posições espaciais no interior do aviário, com a região central apresentando temperaturas superiores às das extremidades porém dentro da faixa de conforto térmico das aves considerando a situação de temperaturas médias, durante calor extremo a temperatura interna na instalação alcançou 33 oC. A umidade relativa do ar apresentou pequenas variações durante o dia e maiores no período da noite. Em relação ao índice de temperatura e umidade a maior parte da instalação permaneceu dentro da faixa de conforto.

  15. Fauna de flebotomíneos (Diptera: Psychodidae em fragmentos de floresta ao redor de conjuntos habitacionais na cidade de Manaus, Amazonas, Brasil. I. Estratificação Vertical Sand flies fauna (Diptera: Psychodidae in forest fragments around housing complexes in the Manaus municipality, state of Amazonas, Brazil. I. Vertical Stratification

    Directory of Open Access Journals (Sweden)

    Marlisson Augusto Costa Feitosa

    2006-12-01

    Full Text Available No período de janeiro a agosto de 1999 foram realizadas coletas de flebotomíneos (Diptera: Psychodidae em duas áreas de floresta residual (Estrada do Turismo e Cidade de Deus, na periferia da cidade de Manaus (AM, tendo o objetivo de verificar as espécies e a estratificação vertical. Foram utilizadas armadilhas luminosas tipo CDC, colocadas nos fragmentos de florestas a um e dez metros de altura. Foram capturados 7.516 flebotomíneos distribuídos em 45 espécies; 4.836 espécimes, de 36 espécies, na estrada de Turismo e 2.680 exemplares, de 40 espécies, na Cidade de Deus. Predominaram na Estrada do Turismo Lutzomyia umbratilis e L. ubiquitalis e na Cidade de Deus, L. umbratilis e L. anduzei. A presença de algumas espécies, apenas em certas áreas, indica a adaptabilidade destes flebotomíneos em áreas sobre ação antrópica.Between January and August of 1999, a study was carried out on the phlebotomine (Diptera: Psychodidae sand flies occurrence in two areas of residual forest (Estrada do Turismo and Cidade de Deus, in the periphery of Manaus, AM. The objective of this study was to verify the Phlebotominae sand fly fauna and vertical stratification. CDC light traps were placed in the forests, one to ten meters in height. A total of 7.516 sand flies, distributed in 45 species, were captured: 4.836 specimens of 36 species in the Estrada do Turismo and 2.680 individuals of 40 species in the Cidade de Deus.Predominant in the Estrada do Turismo were the species Lutzomyia umbratilis and L. ubiquitalis were as L. umbratilis and L. anduzei prevailed in the Cidade de Deus. Different Phlebotominae sand fly species in certain areas, showed an adaptation of these sand flies to areas of human activity.

  16. Desenvolvimento e avaliação de um secador solar para grãos, associado a silo subterrâneo Development and evaluation of a solar drier for grains associated to underground bin

    Directory of Open Access Journals (Sweden)

    Carlos A. da S. Braga

    2005-12-01

    Full Text Available Um secador com aquecimento solar, tipo barcaça, com sistema mecânico de descarregamento, foi testado na secagem de grãos de feijão (Phaseolus vulgaris, L.. Em comparação com o sistema tradicional (secagem em terreiro, foram alcançadas reduções de: 83%, no tempo de secagem; 76% na área necessária à operação e 95% no tempo de descarregamento do secador e enchimento do silo respectivo.A batch-type, solar-heated air drier with mechanical system of unloading was tested in drying edible beans (Phaseolus vulgaris, L.. Reductions in drying time and area, reached 83 and 76%, respectively, as compared with the natural drying process. A hand-driven mechanical unloading system incorporated allows 95% reduction in unloading time.

  17. Irradiation testing of LEU fuels in the SILOE Reactor - Progress report

    International Nuclear Information System (INIS)

    Merchie, Francis; Baas, Claude; Martel, Patrick

    1985-01-01

    Irradiation of uranium-silicide fuels has continued in the SILOE reactor during the past year. Thickness vs. fission density data from four U 3 Si plates containing 5.5 and 6.0 g U/cm 3 have been analyzed, and the results are presented. The irradiation of a full 60 g U/cm 3 U 3 Si element has begun. In addition, four U 3 Si 2 plates containing 20 to 54 g U/cm 3 are now being irradiated. These irradiations and future plans are discussed in the paper. (author)

  18. Salida de campo a Santo Domingo de Silos, en Burgos, el 14 de septiembre de 1953

    OpenAIRE

    Valverde Gómez, José Antonio, 1926-2003

    2008-01-01

    Salida de campo a Santo Domingo de Silos, en Burgos, el 14 de septiembre de 1953, de la que se anotaron observaciones sobre cangrejos, los siguientes peces: "Foxinellus sp." y Trucha (Salmo trutta o Oncorhynchus mykiss), los siguientes mamíferos: Bos taurus (Vaca), Capra aegagrus hircus (Cabra doméstica) y Galemys pyrenaicus (Desmán pirenaico), y las siguientes aves: Aquila sp. (Águila), Carduelis cannabina (Pardillo común, llamada Colorín y Acanthis cannabina por el autor), Carduelis carduel...

  19. The 'SILOE' reactor at Grenoble, France and associated hot cell facilities. Information sheets

    International Nuclear Information System (INIS)

    Hardt, P. von der; Roettger, H.

    1981-01-01

    Technical information is given on the SILOE reactor and associated hot cell facilities, with the main emphasis on experimental irradiation facilities, specialized irradiation devices (loops and capsules) and possibilities for post-irradiation examinations of samples. The information is presented in the form of eight information sheets under the headings: main characteristics of the reactor; utilization and specialization of the reactor; experimental facilities; neutron spectra; main characteristics of specialized irradiation devices; main characteristics of hot cell facilities; equipment and techniques available for post-irradiation examinations; utilization and specialization of the hot cell facilities

  20. Experiences in the emptying of waste silos containing solid nuclear waste from graphite- moderated reactors

    International Nuclear Information System (INIS)

    Wall, S.; Schwarz, T.

    2003-01-01

    Before reactor sites can be handed over for ultimate decommissioning, at some sites silos containing waste from operations need to be emptied. The form and physical condition of the waste demands sophisticated retrieval technologies taking into account the onsite situation in terms of infrastructure and silo geometry. Furthermore, in the case of graphite moderated reactors, this waste usually includes several tonnes of graphite waste requiring special HVAC and dust handling measures. RWE NUKEM Group has already performed several contracts dealing with such emptying tasks. Of particular interest for the upcoming decommissioning projects in France might be the activities at Vandellos, Spain and Trawsfynnyd, UK. Retrieval System for Vandellos NPP is discussed. Following an international competitive tender exercise, RWE NUKEM won the contract to provide a turn-key retrieval system. This involved the design, manufacture and installation of a system built around the modules of a 200 kg capacity version of the ARTISAN manipulator system. The ARTISAN 200 manipulator, with remote slave arm detach facility, was deployed on a telescopic mast inserted into the silos through the roof penetrations. The manipulator deployed a range of tools to gather the waste and load it into a transfer basket, deployed through an adjacent penetration. After commissioning, the system cleared the vaults in less than the scheduled period with no failures. At the Trawsfynnyd Magnox plants two types of intermediate level waste (ILW) accumulated on site; namely Miscellaneous Activated Components (MAC) and Fuel Element Debris (FED). MAC is predominantly components that have been activated by the reactor core and then discharged. FED mainly consists of fuel cladding produced when fuel elements were prepared for dispatch to the reprocessing facility. RWE NUKEM Ltd. was awarded a contract to design, supply, commission and operate equipment to retrieve, pack and immobilize the two waste streams. Major

  1. Two dimensional neutron transport calculation system for plate-reactors: experimental design and qualification with SILOE

    International Nuclear Information System (INIS)

    Roussos, N.

    1982-01-01

    The main objective of this work is to create a neutronic calculations system for the SILOE-SILOETTE reactors, adaptable to other types of plate reactors. The author presents the methodology and the development of the APOLLO 1D (99 gr.) calculations for the creation of cross sections libraries. After a recall of the Discrete Ordinate Method (DOT), the method accuracy is studied in order to optimize the spatial discretization of the calculations; calculations of DOT 3.5 and of SILOETTE core are conducted and their convergence and costs are examined. DOT calculations of SILOETTE and experimental tests results are then compared [fr

  2. Fighting Smoldering Fires in Silos – A Cautionary Note on Using Carbon Dioxide to Inert

    DEFF Research Database (Denmark)

    Hedlund, Frank Huess

    2017-01-01

    This communication seeks to draw attention to the hazards of releasing liquid carbon dioxide into environments where an ignitable atmosphere may exist. Static discharges have sufficient energy to ignite flammable vapors and an internal explosion may result when fighting smoldering fires using...... this approach. A recent article in Biomass and Bioenergy examines an explosion in a Norwegian wood pellet silo when attempting to suppress a smoldering fire with CO₂. The article argues that the electrostatic hazard of CO₂ is widely under-appreciated and incidents like this are avoidable....

  3. Overview of Remote Retrieval Equipment and the Strategy for removal of Radon Bearing Waste from Silos 1 and 2 at the Fernald Site

    International Nuclear Information System (INIS)

    Rinker, Michael W.; Samuel, Todd J.

    2001-01-01

    This document provides an overview of the remote retrieval equipment and strategy for the retrieval of waste from Silos 1 and 2 at the Department of Energy's Fernald site in southwestern Ohio. The scope of this paper is limited to general descriptions of remote equipment specifically related in-silo retrieval. The retrieval strategy describes how the contractor team is planning to utilize the various remote subsystems to efficiently remove the waste from the silos from a philosophical standpoint as opposed to a procedural and operational standpoint. The retrieval strategy and approach is based upon the successful tank retrieval operations conducted at DOE's Oak Ridge and Hanford Sites. Lessons learned from these previous operations have been utilized in planning an approach for the Fernald Silo Retrieval Project. The equipment overview includes discussion of the retrieval system configurations together with descriptions of the robotic arm and retrieval end effectors, the conditioning and transfer pumping system, the sluicer and sluicing pump, as well as the debris retrieval system. A unique challenge being addressed as part of this project is the waste contents. Silos 1 and 2 contain two distinct layers of material that need to be retrieved. The first layer is a Bentonite (trade name BentogroutTM) cap that was placed in the silos to prevent radon migration into the dome space and out of the silos. The Bentonite layer varies, but in general it is approximately six inches deep in the center of the silo and thirty-six inches near the silo walls. The material may have dried out on the surface, and may still be wetted near the bottom of the bentonite layer. The K-65 ore tailings, which were slurried into the silos, are the remainder of the waste that is over 20' in depth. This paper provides an overview of the retrieval strategies, technologies, and techniques that will be used to safely and efficiently retrieve the waste from the Fernald Silos

  4. Formulation and evaluation of gas release scenarios for the silo in Swedish Final Repository for Radioactive Waste (SFR)

    International Nuclear Information System (INIS)

    Carlsson, J.; Moreno, L.

    1992-01-01

    The Swedish Final Repository for Radioactive Waste (SFR) has been in operation since 1988 and is located in the crystalline rock, 60 m below the Baltic Sea. In the licensing procedure for the SFR the safety assessment has been complemented with a detailed scenario analysis of the performance of the repository. The scenarios include the influence on radionuclide release by gas formation and gas transport processes in the silo. The overall conclusion is that the release of most radionuclides from the silo is only marginally affected by the formation and release of gas, even for scenarios considering unexpected events. The largest effects were found for short-lived radionuclides and radionuclides that have no or low sorption ability. Except for very extreme scenarios for the silo the overall impact from repository on the environment is by far dominated by the release of radionuclides from the rock vaults. 10 refs., 6 figs

  5. Espectro e distribuição vertical das estratégias de dispersão de diásporos do componente arbóreo em uma floresta estacional no sul do Brasil Spectrum and vertical distribution of diaspore dispersal modes in a seasonal forest in Southern Brazil

    Directory of Open Access Journals (Sweden)

    Eduardo Luís Hettwer Giehl

    2007-03-01

    Full Text Available A dispersão de diásporos é um evento de elevada importância para as espécies vegetais, que dispõem de diversas estratégias para este fim. O presente estudo teve por objetivos conhecer e caracterizar o espectro das diferentes estratégias de dispersão do componente arbóreo em uma floresta estacional de Santa Maria, Rio Grande do Sul, Brasil (próximo às coordenadas 53º54'W e 29º38'S e, a partir desses dados, investigar sua relação com os estratos verticais da floresta. Foram amostrados todos os indivíduos com perímetro à altura do peito > 15 cm, em 100 unidades amostrais de 10×10 m. A caracterização das estratégias de dispersão foi realizada por meio de observações a campo de frutos e potenciais dispersores, e consulta à bibliografia especializada. Foram amostradas 58 espécies pertencentes a 26 famílias botânicas. Dessas espécies, 74% apresentaram estratégia de dispersão zoocórica; 24%, estratégia de dispersão anemocórica e apenas Gymnanthes concolor Spreng. apresentou a estratégia autocórica. Analisando-se a proporção das estratégias de dispersão por meio da densidade relativa, verificou-se que 80% dos indivíduos são zoocóricos, 12% anemocóricos e 8% autocóricos. Para a floresta analisada foram encontradas diferenças significativas nos padrões de distribuição vertical das espécies agrupadas de acordo com a estratégia de dispersão. A zoocoria ocorreu em espécies de todos os estratos, enquanto a autocoria ficou limitada ao sub-bosque. Já a anemocoria foi mais importante entre as espécies com indivíduos emergentes.Diaspore dispersal is presumed to have great fitness for plants, which could be enhanced by different dispersal modes. Our aim was to generate a dispersal spectrum and to seek for analyze relative ecological importance of tree-species dispersal modes in a seasonal forest in Santa Maria, Rio Grande do Sul, Brazil (approximately 53º54'W and 29º38'S and, with these data, to

  6. Composition, community structure and vertical distribution of epiphytic ferns on Alsophila setosa Kaulf., in a Semideciduous Seasonal Forest, Morro Reuter, RS, Brazil Composição, estrutura comunitária e distribuição vertical de samambaias epifíticas sobre Alsophila setosa Kaulf. (Cyatheaceae, em Floresta Estacional Semidecidual, Morro Reuter, RS, Brasil

    Directory of Open Access Journals (Sweden)

    Paulo Henrique Schneider

    2011-09-01

    Full Text Available In tropical forests, tree ferns constitute an important phorophyte for the establishment and occurrence of epiphytic species. Composition, structure and vertical distribution of epiphytic ferns were studied on Alsophila setosa Kaulf., in a semideciduous seasonal forest fragment, in the city of Morro Reuter (29º32'07"S and 51º05'26"W, in the state of Rio Grande do Sul, Brazil. The sample consisted of 60 caudices of at least 4 m high, which were divided in 1 m intervals from the ground. The specific importance value was estimated trough the coverage value and caudex frequency at the intervals. A total of 14 species was recorded, belonging to 10 genera and five families. The highest specific richness occurred in Polypodiaceae. The rarefaction curve for the total sample did not reach an asymptote with an estimated 14.98 to 16.95 species, showing that a few species could still be recorded. The species with the highest importance value and vertical amplitude was Blechnum binervatum (Poir. C.V. Morton & Lellinger, with a decreasing frequency from bottom to top of the caudex. Considering the predominance of habitual holoepiphytes, the removal of Alsophila setosa caudices compromises microhabitat availability for epiphytes in the forest understory.Nas florestas tropicais as samambaias arborescentes constituem forófitos importantes para o estabelecimento e ocorrência de espécies epifíticas. A composição, a estrutura e a distribuição vertical de samambaias epifíticas foram estudadas sobre Alsophila setosa Kaulf., em fragmento de Floresta Estacional Semidecidual, localizado no município de Morro Reuter (29º32'07"S e 51º05'26"W, Rio Grande do Sul, Brasil. Foram amostrados 60 cáudices de no mínimo 4 m de altura e eles foram divididos em intervalos de 1 m, a partir do solo. O valor de importância específico foi estimado a partir da freqüência nos cáudices , nos intervalos e do valor de cobertura. Foram registradas 14 espécies epif

  7. Efeitos do tratamento da Classe II divisão 1 em pacientes dolicofaciais tratados segundo a Terapia Bioprogressiva (AEB cervical e arco base inferior, com ênfase no controle vertical Treatment effects on Class II division 1 high angle patients treated according to the Bioprogressive therapy (cervical headgear and lower utility arch, with emphasis on vertical control

    Directory of Open Access Journals (Sweden)

    Viviane Santini Tamburús

    2011-06-01

    Full Text Available OBJETIVO: o presente estudo investigou o controle vertical e os efeitos do tratamento ortodôntico em pacientes dolicofaciais, empregando o AEB cervical e o arco base inferior. MÉTODOS: foi realizada a avaliação cefalométrica de 26 pacientes dolicofaciais com Classe II, divisão 1, idade média de 114 meses. O tratamento ortodôntico envolveu a utilização do AEB cervical na arcada superior e arco base na arcada inferior, até a obtenção da chave de oclusão normal dos molares, e finalizado segundo a Terapia Bioprogressiva, com duração média de 56 meses. Foram avaliados os valores de FMA, SN.GoGn, ANB, Fg-S, S-FPm, comprimento maxilar, comprimento mandibular, AFP (altura facial posterior, AFA (altura facial anterior, IAF (índice de altura facial, ângulo do plano oclusal, ângulo do plano palatino, QT (queixo total, LS (lábio superior e ângulo Z. RESULTADOS: o tratamento promoveu estabilidade dos planos mandibular, oclusal e palatino. Ocorreu a correção anteroposterior das bases apicais, verificada pela redução significativa da grandeza ANB. A maxila apresentou um suave deslocamento anterior,com um suave aumento da dimensão anteroposterior.A mandíbula apresentou melhora de seu posicionamento em relação à base do crânio e sua dimensão anteroposterior aumentou significativamente. As alturas faciais posterior e anterior permaneceram em equilíbrio, não alterando significativamente o IAF. O perfil tegumentar apresentou melhora significativa. CONCLUSÃO: o tratamento realizado promoveu a correção das bases apicais, com controle dos planos horizontais e das alturas faciais, sendo efetivo no controle vertical.OBJECTIVE: This study investigated vertical control and the effects of orthodontic treatment on dolichofacial patients, using cervical headgear (CHG and lower utility arch. METHODS: Cephalometric assessment of 26 dolichofacial patients with Class II, division 1, and mean age of 114 months. Orthodontic treatment involved

  8. Maize Storage in Termite Mound Clay, Concrete, and Steel Silos in the Humid Tropics: Comparison and Effect on Bacterial and Fungal Counts

    Science.gov (United States)

    This study investigated the functional suitability of using the readily-available termite mound clay (TMC) for grain silo construction in comparison to conventional reinforced concrete (RC) and galvanized steel (GS) silos for maize storage in the humid tropics. The extent to which temperature and r...

  9. Performance evaluation of termite-mound clay, concrete and steel silos for the storage of maize grains in the humid tropics

    Science.gov (United States)

    Inadequate storage facilities have contributed to severe maize postharvest losses in many developing countries. This study determined the potential of termite mound clay (TMC), a readily-available material in Nigeria, as a construction material for storage silos. The performance of the TMC silo was ...

  10. Siloe, Osiris, and the future perspective of swimming-pool reactors

    International Nuclear Information System (INIS)

    Chatoux, J.; Denielou, G.; Lerouge, B.

    1964-01-01

    Siloe and Osiris are two new general purpose research reactors of the 'Commissariat a l'energie Atomique'. Siloe, located within the 'Centre d'Etudes Nucleaires' of Grenoble is a swimming pool reactor of the same type as Melusine and Triton. It operates, at a nominal power of 15 MW thermal and has reached the peak power of 20 MW thermal with two thirds of its cooling system working. The fast flux above 1 MeV, which is maximum at the center of the core at 15 MW thermal is 1,2. 10 14 . The core, quite open, is downward cooled. Average specific power is 159 kW/l. Osiris is under construction at Saclay. Designed for 50 MW thermal, this reactor is upward cooled. The fast flux at the center of the core above 1 MeV is calculated to be 2, 5.10 14 . The average designed specific power is 280 kW/l. A fixed zircaloy gamma shield makes a box round the core. Future perspectives open to non-pressurised swimming-pool reactors are examined. Ways are suggested for neutronic; thermal and shielding modifications which make possible further improvements in the performances and economy of these devices. (authors) [fr

  11. Effect of Nitrogen Fertilizers on the Lysine Synthesis in Silo-Maize

    Energy Technology Data Exchange (ETDEWEB)

    Cencelj, J.; Jelenic, Dj. [Institute for the Application of Nuclear Energy in Agriculture, Veterinary Medicine and Forestry, Belgrade, Yugoslavia (Serbia)

    1968-07-01

    In investigations on amino acids of silo-maize, different nitrogen fertilizers were studied to determine their effect on amino acid composition and variation during the growth period. The experiment was carried out with silo-maize, hybrid W 464A, grown on sandy soil, which had not been treated for six years with either fertilizers or manure. Before cultivation phosphorus and potassium fertilizers were applied, and the nitrogen fertilizers, ammonium sulphate, ammonium nitrate, calcium cyanamide and urea, were applied at the most appropriate time of application. The first samples were taken at the time of flowering, the second after flowering, and the third, fourth and fifth in the lactic, wax, and full maturity phases, respectively. The percentages of crude protein of the maize gradually decreased while the nitrogen-free extraction matter increased during this period. The protein content of the maize was highest with sodium nitrate and urea fertilization and lowest when calcium cyanamide was used. Investigations to determine whether or not an increase in crude protein content was correlated with an increased content of lysine have shown that there is a correlation when plants are fertilized with calcium cyanamide. The content of essential amino acids was more satisfactory in plants fertilized with urea than with sodium nitrate. According to the statistical analysis, the best improvement in lysine content was obtained with urea (0.23%), the least satisfactory with calcium cyanamide (0.17%), and PK fertilizers without nitrogen (0.15%). (author)

  12. Downward surface flux computations in a vertically inhomogeneous grey planetary atmosphere Cálculo do fluxo radiativo superficial em uma atmosfera planetária cinza e verticalmente não-homogênea

    Directory of Open Access Journals (Sweden)

    Marcos Pimenta de Abreu

    2008-03-01

    Full Text Available We describe an efficient computational scheme for downward surface flux computations in a vertically inhomogeneous grey planetary atmosphere for different values of solar zenith angle. We start with the basic equations of a recently developed discrete ordinates spectral nodal method, and we derive suitable bidirectional functions whose diffuse components do not depend on the solar zenith angle. We then make use of these bidirectional functions to construct an efficient scheme for computing the downward surface fluxes in a given model atmosphere for a number of solar zenith angles. We illustrate the merit of the computational scheme described here with downward surface flux computations in a three-layer grey model atmosphere for four values of solar zenith angle, and we conclude this article with general remarks and directions for future work.Este artigo descreve um esquema computacional baseado em desenvolvimentos recentes do método espectro-nodal de ordenadas discretas para o cálculo eficiente do fluxo radiativo superficial em uma atmosfera planetária cinza e verticalmente não-homogênea para valores distintos do ângulo zenital solar. A partir das equações básicas do método espectro-nodal de ordenadas discretas, são obtidas funções bidirecionais discretas cujas componentes difusas não dependem do ângulo zenital solar. Com essas funções bidirecionais discretas, é construído um esquema computacional para calcular eficientemente fluxos radiativos superficiais em uma dada atmosfera-modelo para vários ângulos zenitais solares. O mérito computacional do esquema resultante é ilustrado com resultados numéricos para os fluxos radiativos superficiais em uma atmosfera-modelo cinza com três camadas para quatro valores distintos do ângulo zenital solar. Este artigo é finalizado com observações gerais e indicações de trabalhos futuros.

  13. Uncertainty determination in a custody transfer operation from vertical cylinder storage tanks; Determinacao da incerteza do volume transferido em tanques cilindricos verticais

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Elcio C.; Ferreira, Ana Luisa A.S. [TRANSPETRO - PETROBRAS Transporte S.A., Rio de Janeiro, RJ (Brazil); Orlando, Alcir F.; Val, Luiz G. do [Pontificia Univ. Catolica do Rio de Janeiro, RJ (Brazil)

    2004-07-01

    The INMETRO/ANP 1 regulation (2000), presents rules to be followed for measuring and calibrating cylindrical vertical oil storage tanks in Brazil, according to ISO 7507-1 (1993) standard. A methodology for estimating the uncertainty (95,45 % confidence level) of the volume in a custody transfer process was developed, based on ISO GUM (1998) standard. The strapping method was selected for this study, because it has been used as a standard procedure by INMETRO. In this study, the same uncertainty values, as suggested by the standard, were used to estimate the uncertainty of the liquid volume in the tank. This study showed that the uncertainty of the transferred liquid volume from the tank varies from 0,2% to 0,4%, being smaller for larger volumes, which is thus the recommended application. The uncertainty of the ring height measurement is the largest contribution to the volume measurement uncertainty, and, thus, must be accurately measured. The tank internal diameter uncertainty is a small contribution to it. This paper calculates the uncertainty of liquid volume transferred from the tank by three methods, namely, this paper's, ISO 7507- 1's and INMETRO's, and shows that the most important contribution to the measurement uncertainty is the density measurement uncertainty, which must be accurately measured, at least, to within {+-} 0,0005, if the volume uncertainty is to remain in the 0,5 % to 1 % range. (author)

  14. The cryogenic installations for irradiation in the reactors Melusine and Siloe; Les installations cryogeniques pour irradiations des reacteurs Melusine et Siloe

    Energy Technology Data Exchange (ETDEWEB)

    Bochirol, L; Le Calvez, J; Doulat, J; Verdier, J; Lacaze, A; Weil, L [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1964-07-01

    The study of defects created in solids by irradiation is of considerable fundamental and practical interest. Low temperature irradiation allows defects to be obtained in their simplest 'primary' state, not being then annihilated or rearranged by thermal motion. In-pile irradiation at low temperature raises a number of technical problems connected to 1) the necessary refrigeration power which may be considerable, 2) chemical processes which may occur under irradiation, 3) the lack of space in a reactor. Furthermore the necessity that all the irradiation and subsequent measurements be done without reheating the samples demands continuous and reliable working of the irradiation device and its being designed so as to permit removal of the samples in the cold condition or their measurement and controlled annealing 'in situ'. The way in which these problems have been solved in Grenoble for irradiation devices at 78 deg. K, 28 deg. K and 4 deg. K in the swimming-pool reactors Melusine and Siloe is described. Some operation results are given about the liquid nitrogen rig, called mark A, which has worked for several years in Melusine. In particular certain observations about chemical reactions which may occur in impure liquid nitrogen under radiation are made. The liquid nitrogen rig, called mark B, which has just been installed in the Siloe reactor, is described with some detail. The essential features of this apparatus are that irradiation can be performed in higher fluxes with it than with the former one, and that its operation is made much easier by a design which allows the samples to be introduced and removed without any disconnection of the apparatus. A liquid hydrogen loop, which has worked for one year in the Melusine reactor, is then analysed. An entirely closed hydrogen refrigerating circuit provides the coldness to the irradiation enclosure, which contains neon. Owing to this solution, the samples may be recovered in the cold condition without hydrogen being

  15. Distribuição horizontal e vertical de fósforo em sistemas de cultivos exclusivos de soja e de integração lavoura-pecuária-floresta

    Directory of Open Access Journals (Sweden)

    Debora Diel

    2014-08-01

    Full Text Available O objetivo deste trabalho foi avaliar a distribuição horizontal e vertical do fósforo no solo e a produtividade de soja em sistemas de cultivos exclusivos e de integração lavoura-pecuária-floresta (ILPF. Foram avaliados os tratamentos: floresta plantada de eucalipto; lavoura de soja e milho safrinha consorciado com Urochloa brizantha 'Marandu'; pastagem de U. brizantha; sistema de ILPF; e duas áreas controle, com floresta nativa e pousio. O solo foi coletado nas camadas de 0-5, 5-10, 10-20 e 20-30 cm, para determinação das características químicas. As avaliações foram realizadas no segundo ano agrícola após a implantação do experimento. No sistema de ILPF, solo e produtividade foram avaliados em quatro transectos equidistantes, no centro do renque e a 3, 6, 10 e 15 m do renque, nas faces norte e sul. Os teores de P disponível (Mehlich-1 foram maiores nas camadas superficiais do solo, nos sistemas com soja/milho safrinha e com ILPF. No ILPF, os teores de P disponível não diferiram entre as distâncias do renque das árvores, e a produtividade de soja não diferiu da observada no sistema com soja/milho safrinha. Portanto, com dois anos de implantação, o sistema ILPF ainda não é capaz de interferir marcadamente nas características químicas do solo e na produtividade da soja.

  16. PENGEMBANGAN PRODUK OLAHAN KOPI DI DESA SIDOMULYO KECAMATAN SILO KABUPATEN JEMBER

    Directory of Open Access Journals (Sweden)

    Yuli Hariyati

    2014-04-01

    Full Text Available ABSTRAKKopi (Coffea spp. L. merupakan komoditi perkebunan yang strategis. Kopi rakyat tersebar di beberapa kecamatan di Kabupaten Jember, terutama di Kalisat dan Silo. Adanya faktor pendorong dan faktor penghambat pada pengolahan produk olahan kopi dapat dirumuskan suatu rekomendasi kebijakan pengembangan produk olahan kopi, dimana meningkatkan faktor pendorong dan meminimalisir faktor penghambat. Penelitian ini bertujuan untuk mengetahui rekomendasi kebijakan pada pengembangan pengolahan kopi di Desa Sidomulyo Kecamatan Silo Kabupaten Jember. Metode penelitian yang digunakan adalah metode deskriptif dan metode analitis. Analisis data yang digunakan adalah analisis medan kekuatan. Hasil penelitian menunjukkan bahwa faktor pendorong tertinggi adalah motivasi petani yang tinggi dengan nilai faktor urgensi sebesar 1,74, sedangkan faktor penghambat tertinggi adalah bahan baku yang diolah terbatas dengan nilai faktor urgensi sebesar 1,42. Rekomendasi yang sebaiknya diterapkan untuk mendukung faktor pendorong adalah melakukan penyuluhan secara berkesinambungan, sedangkan rekomendasi sebagai solusi faktor penghambat adalah menjalin kerja sama dengan petani olah basah yang belum melakukan olah basah untuk melakukan olah basah  guna menjaga ketersediaan kopi olah basah dan menambah modal bagi unit usaha produksi pada koperasi ABSTRACTCoffee (Coffea spp. L. is one of a strategic commodity. The coffee public plantation is spread out to some sub-districts in Jember, especially in Kalisat and Silo. The existence of factors driving and inhibiting factors in the processing of coffee processed products can be formulated a policy recommendation development of processed coffee products, which enhance the driving factors and minimize the inhibiting factors. This study aims to determine policy recommendations on the development of coffee cultivation in the village of Shiloh Sidomulyo Jember District. The method used is descriptive method and analytical methods

  17. Control program of the neutron four-circle-diffractometer P32 at the SILOE reactor/CEN Grenoble

    International Nuclear Information System (INIS)

    Guth, H.; Paulus, H.; Reimers, W.; Heger, G.

    1983-09-01

    The four-circle diffractometer P32 for elastic neutron scattering on single crystals was installed at the SILOE reactor/CEN Grenoble in 1981. The control program, presented here, is a new update of the former program versions used at the FR2 reactor/Kernforschungszentrum Karlsruhe. Important improvements concerning reliability and handling of the diffractometer are added. (orig.) [de

  18. Produção hidropônica de morangueiro em sistema de colunas verticais, sob cultivo protegido Hydroponic strawberry production in vertical columns system under protected cultivation

    Directory of Open Access Journals (Sweden)

    Eunice Oliveira Calvete

    2007-01-01

    Full Text Available O cultivo do morangueiro fora do solo possibilita a eliminação do uso de produtos para desinfecção, reduzindo o consumo de frutos contaminados e a agressão ao meio ambiente, além de proporcionar melhor aproveitamento da área e maior facilidade de manejo da cultura. Este trabalho teve como objetivo avaliar, em ambiente protegido e colunas verticais, dois sistemas de irrigação: gotejamento por estacas (externo e autocompensante (interno; dois tipos de substratos: Horta 2 e Tabaco 1; com e sem drenagem. A cultivar utilizada foi a Oso Grande. O delineamento foi em blocos casualizados, com os tratamentos dispostos em parcela subsubdividida, com três repetições. Com base nos rendimentos obtidos nos terços superior, médio e inferior das colunas, o sistema de irrigação mais indicado é o gotejamento por estacas (externo, com drenagem na extremidade inferior da coluna. Os substratos não diferem quanto à produção, mas Horta 2 incrementa o teor de antocianina nos frutos.Since strawberry cultivation in soil less system does not needs disinfection products, it decreases fruits and environmental contamination. Besides it provides a better utilization of the area and makes easy the management of the culture. The objective of this work was to evaluate two irrigation systems: dripping for props (outside and self compensate (inside; and two types of substrates: Horta 2 and Tabaco 1; with or without draining, on the cultivar Oso Grande of strawberry. The experiment was carried out under protected cultivation and in vertical columns conditions. The experimental design was randomized blocks, with three replications, and the treatments were arranged in a split-plot. The strawberry yield found in the upper, medium, and lower positions of the columns indicates that the dripping for props (outside is the most efficient irrigation system, since drainage is used in the lower extremity of the column. Although there were no differences substrates, Horta

  19. Long-Term Performance of Silo Concrete in Low- and Intermediate-Level Waste (LILW) Disposal Facility

    International Nuclear Information System (INIS)

    Jung, Hae Ryong; Kwon, Ki Jung; Lee, Seung Hyun; Lee, Sung Bok; Jeong, Yi Yeong; Yoon, Eui Sik; Kim, Do Gyeum

    2012-01-01

    Concrete has been considered one of the engineered barriers in the geological disposal facility for low- and intermediate-level wastes (LILW). The concrete plays major role as structural support, groundwater infiltration barrier, and transport barrier of radionuclides dissolved from radioactive wastes. It also works as a chemical barrier due to its high pH condition. However, the performance of the concrete structure decrease over a period of time because of several physical and chemical processes. After a long period of time in the future, the concrete would lose its effectiveness as a barrier against groundwater inflow and the release of radionuclides. An subsurface environment below the frost depth should be favorable for concrete longevity as temperature and moisture variation should be minimal, significantly reducing the potential of cracking due to drying shrinkage and thermal expansion and contraction. Therefore, the concrete structures of LILW disposal facilities below groundwater table are expected to have relatively longer service life than those of near-surface or surface concrete structures. LILW in Korea is considered to be disposed of in the Wolsong LILW Disposal Center which is under construction in geological formation. 100,000 waste packages are expected to be disposed in the 6 concrete silos below EL -80m in the Wolsong LILW Disposal Center as first stage. The concrete silo has been considered the main engineered barrier which plays a role to inhibit water inflow and the release of radionuclides to the environments. Although a number of processes are responsible for the degradation of the silo concrete, it is concluded that a reinforcing steel corrosion cause the failure of the silo concrete. Therefore, a concrete silo failure time is calculated based on a corrosion initiation time which takes for chloride ions to penetrate through the concrete cover, and a corrosion propagation time. This paper aims to analyze the concrete failure time in the

  20. Long-Term Performance of Silo Concrete in Low- and Intermediate-Level Waste (LILW) Disposal Facility

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Hae Ryong; Kwon, Ki Jung; Lee, Seung Hyun; Lee, Sung Bok; Jeong, Yi Yeong [Korea Radioactive-waste Management Corporation, Daejeon (Korea, Republic of); Yoon, Eui Sik [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of); Kim, Do Gyeum [Korea Institute of Construction Technology, Goyang (Korea, Republic of)

    2012-05-15

    Concrete has been considered one of the engineered barriers in the geological disposal facility for low- and intermediate-level wastes (LILW). The concrete plays major role as structural support, groundwater infiltration barrier, and transport barrier of radionuclides dissolved from radioactive wastes. It also works as a chemical barrier due to its high pH condition. However, the performance of the concrete structure decrease over a period of time because of several physical and chemical processes. After a long period of time in the future, the concrete would lose its effectiveness as a barrier against groundwater inflow and the release of radionuclides. An subsurface environment below the frost depth should be favorable for concrete longevity as temperature and moisture variation should be minimal, significantly reducing the potential of cracking due to drying shrinkage and thermal expansion and contraction. Therefore, the concrete structures of LILW disposal facilities below groundwater table are expected to have relatively longer service life than those of near-surface or surface concrete structures. LILW in Korea is considered to be disposed of in the Wolsong LILW Disposal Center which is under construction in geological formation. 100,000 waste packages are expected to be disposed in the 6 concrete silos below EL -80m in the Wolsong LILW Disposal Center as first stage. The concrete silo has been considered the main engineered barrier which plays a role to inhibit water inflow and the release of radionuclides to the environments. Although a number of processes are responsible for the degradation of the silo concrete, it is concluded that a reinforcing steel corrosion cause the failure of the silo concrete. Therefore, a concrete silo failure time is calculated based on a corrosion initiation time which takes for chloride ions to penetrate through the concrete cover, and a corrosion propagation time. This paper aims to analyze the concrete failure time in the

  1. Making the Paradigm Shift from Siloed Population Health Management to an Enterprise-Wide Approach.

    Science.gov (United States)

    Matthews, Marc R; Miller, Claudia; Stroebel, Robert J; Bunkers, Kari S

    2017-08-01

    Health systems across the United States have started their journeys toward population health management and the future of accountable care. Models of population health management include patient-centered medical homes and private sector accountable care organizations (ACOs). Other models include public sector efforts, such as Physician Group Practice Transition Demonstrations, Medicare Health Care Quality Demonstration Programs, Beacon Communities, Medicare Shared Savings Program, and Pioneer ACOs. As a result, health care organizations often have pockets of population health initiatives that lack an enterprise-wide strategy. The next steps are to build on these efforts, leverage the learnings from these experiences, and incorporate the initiatives into an overarching framework and a road map for the future. This paper describes the current challenge many organizations face to implement an enterprise solution, describes how to transition from existing siloed initiatives, and shares a case study of how Mayo Clinic launched its Mayo Model of Community Care.

  2. Gravity-driven granular flow in a silo: Characterizing local forces and rearrangements

    Directory of Open Access Journals (Sweden)

    Thackray Emma

    2017-01-01

    Full Text Available While the gravity-driven flow of a granular material in a silo geometry can be modeled by the Beverloo equation, the mesoscale-level particle rearrangements and interactions that drive this flow are not wellunderstood. We have constructed a quasi-two-dimensional system of bidisperse, millimeter-scale disks with photoelastic properties that make force networks within the material visible. The system is contained in an acrylic box with an adjustable bottom opening. We can approach the clogging transition by adjusting this opening. By placing the system between cross-polarizers, we can obtain high-speed video of this system during flow, and extract intensity signals that can be used to identify and quantify localized, otherwise indeterminate forces. We can simultaneously track individual particle motions, which can be used to identify shear transformation zones in the system. In this paper, we present our results thus far.

  3. Advice about the safety of graphite storage silos of Saint Laurent des Eaux facility

    International Nuclear Information System (INIS)

    2005-01-01

    This document is the safety analysis made by the national association of the local commissions of information about nuclear activities (ANCLI), about the safety of graphite storage silos of Saint Laurent des Eaux nuclear facility. The analysis covers: the operation safety and the accident hypothesis, the monitoring of indoor and outdoor contamination in routine situation, the geotechnical characteristics of the site environment, the isotopic inventory and the estimation of radioactivity in routine and accidental situation, the estimation of doses received by the population in accidental situation and the internal emergency plan. After examination of these different points, the scientific committee of the ANCLI considers that a new global evaluation of risks, which integrates more recent exposure data, has to be carried out. (J.S.)

  4. Knowledge silos: assessing knowledge sharing between specialties through the vestibular schwannoma literature.

    Science.gov (United States)

    Schnurman, Zane; Golfinos, John G; Roland, J Thomas; Kondziolka, Douglas

    2017-12-01

    OBJECTIVE It is common for a medical disorder to be managed or researched by individuals who work within different specialties. It is known that both neurosurgeons and neurotologists manage vestibular schwannoma (VS) patients. While overlap in specialty focus has the potential to stimulate multidisciplinary collaboration and innovative thinking, there is a risk of specialties forming closed-communication loops, called knowledge silos, which may inhibit knowledge diffusion. This study quantitatively assessed knowledge sharing between neurosurgery and otolaryngology on the subject of VS. METHODS A broad Web of Science search was used to download details for 4439 articles related to VS through 2016. The publishing journal's specialty and the authors' specialties (based on author department) were determined for available articles. All 114,647 of the article references were categorized by journal specialty. The prevalence of several VS topics was assessed using keyword searches of titles. RESULTS For articles written by neurosurgeons, 44.0% of citations were from neurosurgery journal articles and 23.4% were from otolaryngology journals. The citations of otolaryngology authors included 11.6% neurosurgery journals and 56.5% otolaryngology journals. Both author specialty and journal specialty led to more citations of the same specialty, though author specialty had the largest effect. Comparing the specialties' literature, several VS topics had significantly different levels of coverage, including radiosurgery and hearing topics. Despite the availability of the Internet, there has been no change in the proportions of references for either specialty since 1997 (the year PubMed became publicly available). CONCLUSIONS Partial knowledge silos are observed between neurosurgery and otolaryngology on the topic of VS, based on the peer-reviewed literature. The increase in access provided by the Internet and searchable online databases has not decreased specialty reference bias

  5. Silo busting: how to execute on the promise of customer focus.

    Science.gov (United States)

    Gulati, Ranjay

    2007-05-01

    For many senior executives, shifting from selling products to selling solutions--packages of products and services--is a priority in today's increasingly commoditized markets. Companies, however, aren't always structured to make that shift. Knowledge and expertise often reside in silos, and many companies have trouble harnessing their resources across those boundaries in a way that customers value and are willing to pay for. Some companies--like GE Healthcare, Best Buy, and commercial real estate provider Jones Lang LaSalle (JLL)--have restructured themselves around customer needs to deliver true solutions. They did so by engaging in four sets of activities: COORDINATION: To deliver customer-focused solutions, three things must occur easily across boundaries: information sharing, division of labor, and decision making. Sometimes this involves replacing traditional silos with customer-focused ones, but more often it entails transcending existing boundaries. JLL has experimented with both approaches. COOPERATION: Customer-centric companies, such as Cisco Systems, develop metrics for customer satisfaction and incentives that reward customer-focused cooperation. Most also shake up the power structure so that people who are closest to customers have the authority to act on their behalf. CAPABILITY: Delivering customer-focused solutions requires some employees to be generalists instead of specialists. They need experience with more than one product or service, a deep knowledge of customer needs, and the ability to traverse internal boundaries. CONNECTION: By combining their offerings with those of a partner, companies can cut costs even as they create higher-value solutions, as Starbucks has found through its diverse partnerships. To stand out in a commoditized market, companies must understand what customers value. Ultimately, some customers may be better off purchasing products and services piecemeal.

  6. Tratamento da escoliose em crianças com paralisia cerebral utilizando a prótese vertical expansível de titânio para costela (VEPTR Tratamiento de la escoliosis en niños con parálisis cerebral mediante la prótesis vertical expansible de titanio para las costillas (VEPTR Treatment of scoliosis in children with cerebral palsy using the vertical expandable prosthetic titanium rib (VEPTR

    Directory of Open Access Journals (Sweden)

    Kiyomori de Quental Tyba

    2011-01-01

    Full Text Available OBJETIVO: Avaliar o uso da prótese vertical expansível de titânio (VEPTR como opção de tratamento inicial da escoliose em crianças de baixa idade portadoras de paralisia cerebral. MÉTODOS: Foram avaliados 10 pacientes portadores de paralisia cerebral (PC tratados com VEPTR pelo grupo de escoliose da AACD de São Paulo. Caracterizavam-se por imaturidade esquelética e escoliose progressiva; sem deformidade grave no plano sagital. Realizamos avaliação da curva pelo método de Cobb no pré e pós-operatório e após dois anos de seguimento. RESULTADOS: A correção obtida com o uso do VEPTR no pós-operatório imediato foi em média de 41,4% nas radiografias iniciais sem tração (p = 0,005 e 9,1% (p = 0,055 nas radiografias com tração. Após quatro meses de pós-operatório mantiveram-se ganhos de 27,2% com relação ao início. Houve correção da obliquidade pélvica de 10,2º no pré-operatório para 5,4º em média (p = 0,007. As complicações ocorreram em seis pacientes (60% e em apenas um paciente foi necessária a retirada do VEPTR. CONCLUSÃO: O VEPTR é um método que obteve correção significativa no tratamento provisório das escolioses na PC, apesar de frequentes complicações de baixa morbidade.OBJETIVO: Evaluar el uso de la prótesis vertical expansible de titanio (VEPTR como opción de tratamiento inicial para la escoliosis en niños pequeños con parálisis cerebral. MÉTODOS: 10 pacientes con parálisis cerebral (PC fueron evaluados y tratados con VEPTR por el grupo de escoliosis de la AACD en Sao Paulo. Caracterizados por escoliosis progresiva inmadurez esquelética, sin deformidad grave en el plano sagital. Se evaluó la curva por el método de Cobb en el preoperatorio, posoperatorio, y después de dos años de seguimiento. RESULTADOS: LA CORRECCIón, obtenida con el uso de VEPTR en el posoperatorio inmediato, fue en promedio 41,4% en relación a las radiografías iniciales sin tracción (p = 0,005 y 9,1% (p = 0

  7. Avaliação da resistência de força explosiva em voleibolistas através de testes de saltos verticais Assessment of explosive strength-endurance in volleyball players through vertical jumping test

    Directory of Open Access Journals (Sweden)

    Jefferson Eduardo Hespanhol

    2007-06-01

    Full Text Available O propósito deste estudo foi verificar a existência de diferenças entre o teste de salto vertical com natureza contínua de 60 segundos (TSVC e o teste de salto vertical com natureza intermitente de quatro séries de 15 segundos (TSVI. Os dados foram obtidos através de amostra composta por 10 voleibolistas do sexo masculino (19,01 ± 1,36 anos; 191,5 ± 5,36cm; e 81,74 ± 7,45kg, todos com participação voluntária. As variáveis estudadas foram: as estimativas do pico de potência (PP, potência média (PM e o índice de fadiga (IF. O desempenho estimado através dos testes TSVC, com duração de 60 segundos, e o TSVI foi determinado em quatro séries de 15 segundos, com 10 segundos de recuperação entre cada série. Os dados foram determinados através da estatística descritiva e do teste de Wilcoxon; o nível de significância utilizado foi de p The aim of this study was to verify the differences between the continuous jump test of 60 seconds (CJ60 sec and the intermittent jump test of 4 sets of 15 seconds (IJ4x15 sec. The sample was composed of 10 male volleyball players with 19.01 ± 1.36 years, 191.5 ± 5.36 cm height and 81.74 ± 7.45 of body mass, who participated in this research as volunteers. The variables studied were estimated as the peak power (PP, mean power (MP and fatigue index (FI. These performances were measured through tests of vertical jump with duration the 60 seconds and with the performance of 4 sets of 15 seconds with 10 seconds of recovery between the sets. The data were analyzed through descriptive statistics and the Wilcoxon test. The significance level was of p < 0.05. It was possible to analyze that the continuous and the intermittent jump test presented significant differences in MP (p < 0.05, FI (p < 0.01, and in the number of the vertical jump in 60 seconds (p < 0.01, and the height in 60 seconds exercise (p < 0.05. The MP found in IJ4x15sec was significantly higher than in the CJ60 sec in volleyball

  8. Construcción de silos con encofrados deslizantes - Santa Cruz de Tenerife – España

    Directory of Open Access Journals (Sweden)

    Barrios Martínez, M.

    1976-10-01

    Full Text Available These cereal and oil-cake silos are made up of 10 exterior cylindrical cells, with an inner diameter of 6 m and a height of 31.88 m. The cells are joined together by means of walls whereby four additional octagonal cells are created. Out of these, three are subdivided into four cells and the fourth forms the central silo. Below this unit there is a corridor for the emptying of the silos. The work has been carried out with a travelling form with the following characteristics: mixed with regard to shape and materials; stiff, since the top platforms are connected; and it has a constant cross-section as the dimensions of the silos remain the same throughout the whole height. The form was lifted by means of elevation devices, controlled by a centralized hydraulic mechanism. In view of the characteristics of the travelling form, the concrete used ¡n the work had to fulfill several very special conditions, notably different from these applying to the concrete that is normally used for fixed forms. For this reason, it was submitted to a great number of studies and tests until the requirements had been met. The construction was finished in record time: in the first place, because a detailed programme had been worked out in advance, consisting of a diagram of bars and preference network and secondly, because continuous concreting was applied with day and night shifts, whebery the foreseen two and a half months for finishing the silos were reduced to 12 days.Estos silos, destinados a almacenamiento de cereales y borujo, están formados por 10 celdas exteriores cilíndricas, de 6 m de diámetro interior y 31,88 m de altura, que se unen entre sí por medio de muros, dando lugar a cuatro celdas adicionales de forma octogonal. De éstas, tres están subdivididas en cuatro interceldas, quedando la cuarta como silo central. Debajo del conjunto se ha dispuesto una galería para el vaciado de los silos. La obra se ha realizado con un encofrado deslizante

  9. Fighting fire with gas. CO{sub 2} extinguishes smouldering fires in biomass silos and waste bunkers; Effizientes Feuerwehr-Gas. CO{sub 2} loescht Schwelbraende in Biomasse-Silos und Abfallbunkern

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    2011-07-01

    Organic materials are a great source of energy and so biomass is in big demand. But wherever large amounts of wood, waste and straw are stored in huge silos, there is also a risk of smouldering fires and even explosions. Conventional methods are relatively ineffective at extinguishing fires such as these. But a new extinguishing system from Linde uses CO{sub 2} to effectively fight smouldering fires at the source. (orig.)

  10. Case study: evaluation of continuos blending silos in the cement industry, by the aid of tracer techniques; Caso de estudio: Evaluacion de silos continuos de homogenizacion en la industria del cemento, utilizando tecnicas de radiotrazadores

    Energy Technology Data Exchange (ETDEWEB)

    Sebastian, C; Maghella, G; Mamani, E [Direccion de Aplicaciones. Instituto Peruano de Energia Nuclear, Lima (Peru)

    2000-12-01

    Besides the actual burning process in cement manufacture, particular importance is attached to raw material preparation and homogenization, not only because of the quality of the kiln fed and therefore of the produced cement, but also because of the economy of the kiln operation, which significantly depends on the uniformity of the chemical composition of the material. As a result, the blending process of the cement raw material, before burning, is a basic stage of cement technology production. In this case, the pneumatic homogenization process is studied in a silo with a great storing and processing capacity. The objective is to evaluate the parameters which influence in the continuos operation. The method allows us to determine the optimal blending parameters, through the observation of the movement and distribution of the different fractions of fine dust raw meal, labelled with La-140 as tracer. Changes in blending according to time are discussed as well as the influence of the silo design on the degree of homogenization. It was showed that the silo blending operation has a strong influence on the production of good-quality cement as well as the implications on energy saving.

  11. El tabernáculo de la Catedral de Granada: de Diego de Siloe a Navas Parejo

    Directory of Open Access Journals (Sweden)

    José Antonio Peinado Guzmán

    2010-03-01

    Full Text Available Uno de los elementos más olvidados en los estudios acerca de la Catedral de Granada, ha sido, históricamente, el tabernáculo de su Capilla Mayor. El ideado por Diego de Siloe en 1561, supuso la creación de un elemento innovador dentro del ornato de su presbiterio. Este ciborio, venía a completar un programa iconográfico-teológico cargado de simbolismos. El paso del tiempo hizo que tuviese que ser sustituido por otros. Tras el de Siloe, tenemos referencias de la adquisición de uno en 1648 con forma de «Carro de Ezequiel», otro provisional en 1804 y, finalmente, el actual, hecho por Navas Parejo entre 1924-1929.

  12. Análise da ocorrência dos fluxos e Jatos de Nível Baixo no perfil vertical do vento na baixa atmosfera em Manaus (AM Analysis of the occurrence of streams and Low Level Jets in the vertical wind profile at the lower-atmosphere of Manaus city

    Directory of Open Access Journals (Sweden)

    Cleber Souza Corrêa

    2008-09-01

    Full Text Available Este estudo apresenta uma análise sobre as estruturas verticais nos baixos níveis da atmosfera tropical, região norte do Brasil, utilizando dados de radiossondagem realizadas na cidade de Manaus. Foi descrito um modelo dinâmico que envolve fluxos/Jatos de Nível Baixo (JNB entre os níveis de 950 hPa e 926 hPa, entre 860 hPa e 880 hPa (correspondendo aproximadamente ao nível intermediário de 850 hPa e ao terceira camada mais alta entre 800 hPa e 700 hPa (níveis médios. Esses fluxos e Jatos caracterizam um processo dinâmico de intenso transporte de energia e massa, criando uma estrutura estratificada turbulenta muito eficiente na geração de convecção na região tropical, demonstrando a influência da Camada Limite Planetária Tropical (CLPT na geração de convecção em meso escala.This study presents an analysis of the vertical structure of the low level tropical atmosphere, north region of Brazil, using radiosonde data at Manaus. A dynamical model involving flow/Low Level Jet (LLJ between the 950hPa and 926 hPa levels, between 860 hPa and 880 hPa levels (correspounding to 850 hPa intermediary level and in the third higher layer between 800 hPa and 700 hPa levels (middle levels is described. These streams and jets characterise a dynamical process of intense energy and mass transport, creating a turbulent stratified structure which is very efficient in producing convection at tropical region, demonstrating the influence of the Tropical Planetary Boundary Layer (TPLB, in the mesoscale convection generation.

  13. Feedback of the behaviour of a silo founded on a compressible soil improved by floating stone columns

    Directory of Open Access Journals (Sweden)

    Bahar Ramdane

    2018-01-01

    Full Text Available The coastal city of Bejaia, located 250 kilometers east of the capital Algiers, Algeria, is characterized by soft soils. The residual grounds encountered on the first 40 meters usually have a low bearing capacity, high compressibility, insufficient strength, and subject to the risk of liquefaction. These unfavorable soil conditions require deep foundations or soil improvement. Since late 1990s, stone columns technique is used to improve the weak soils of the harbor area of the city. A shallow raft foundation on soft soil improved by stone columns was designed for a heavy storage steel silo and two towers. The improvement of 18m depth have not reached the substratum located at 39m depth. The stresses transmitted to the service limit state are variable 73 to 376 kPa. A rigorous and ongoing monitoring of the evolution of loads in the silo and settlements of the soil was carried out during 1400 days that is from the construction of foundations in 2008 to 2012. After the loading of the silo in 2010, settlement occurred affecting the stability of the towers due to excessive differential settlements. Consequently, the towers were inclined and damaged the transporter. This paper presents and discusses the experience feedback of the behavior of these structures. Numerical calculations by finite elements have been carried and the results are compared with the measurements.

  14. Case study: evaluation of continuos blending silos in the cement industry, by the aid of tracer techniques

    International Nuclear Information System (INIS)

    Sebastian, C.; Maghella, G.; Mamani, E.

    2000-12-01

    Besides the actual burning process in cement manufacture, particular importance is attached to raw material preparation and homogenization, not only because of the quality of the kiln fed and therefore of the produced cement, but also because of the economy of the kiln operation, which significantly depends on the uniformity of the chemical composition of the material. As a result, the blending process of the cement raw material, before burning, is a basic stage of cement technology production. In this case, the pneumatic homogenization process is studied in a silo with a great storing and processing capacity. The objective is to evaluate the parameters which influence in the continuos operation. The method allows us to determine the optimal blending parameters, through the observation of the movement and distribution of the different fractions of fine dust raw meal, labelled with La-140 as tracer. Changes in blending according to time are discussed as well as the influence of the silo design on the degree of homogenization. It was showed that the silo blending operation has a strong influence on the production of good-quality cement as well as the implications on energy saving

  15. Breaking down the silos to decrease internal diversions and patient flow delays.

    Science.gov (United States)

    Driscoll, Molly; Tobis, Kristen; Gurka, David; Serafin, Frederick; Carlson, Elizabeth

    2015-01-01

    Hospitals strive to admit patients to the units where caregiver competencies align with the patient's condition. When the hospital's census peaks, internal diversions and the associated risks increase, which are intensified when silos exist, as segregated care negatively impacts collaboration and patient safety. In this study, a 600+-bed academic, tertiary care specialty hospital experienced an increase in internal diversions. Within the neuroscience service line, emergent neuroscience transfers from outside hospitals had been declined or internally diverted because of capacity limitations. Formalized processes for improving collaboration between health care providers related to capacity issues were required to decrease internal diversions and improve patient flow and patient safety. A pilot project was conducted on neuroscience units during a process improvement initiative. A hospital-wide internal diversion plan was developed, identifying primary and secondary placement options for all patients requiring hospitalization to support patient flow and patient safety. Forecasting tools were developed to provide units' leadership with current information on expected admissions. Daily capacity huddles were instituted to increase collaboration between patient care units. The interventions trialed during the pilot decreased internal diversions and improved patient flow. The improved collaboration resulted in an 80% decrease in declinations of emergent intensive care unit transfers from outside hospitals due to capacity limitations and a 50% decrease in the number of these patients being internally diverted to alternate intensive care units. The interventions implemented minimized internal diversions and improved patient flow. The transparency of the patient placement process led to an increased collaboration between all participants.

  16. Control of quality and silo storage of sunflower seeds using near infrared technology

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez-Martin, I.; Vilaescusa-Garcia, V.; Lopez-Gonzalez, F.; Oiz-Jimenez, C.; Lobos-Ortega, I. A.; Gordillo, B.; Hernandez-Hierro, J. M.

    2013-05-01

    This work assesses the application of near infrared spectroscopy technology for the quality control of sunflower seeds direct from farmers and from a storage silo. The results show that the analytical method employing near infrared spectroscopy can be used as a rapid and non-destructive tool for the determination of moisture, fat and high/low oleic acid contents in samples of sunflower seeds. The ranges obtained were comparable to those reported for classic chemical methods, and were between 4.6-21.4% for moisture; 38.4-49.6% for fat, and 60.0-93.1% for oleic acid expressed as percentage of total fatty acids. A stepwise discriminant analysis was performed to determine the most useful wavelengths for classifying sunflower seeds in terms of their (high/low) oleic acid composition. The discriminant model allows the acid contents, with a prediction rate of 90.5% for internal validation and of 89.4% for cross-validation. (Author) 23 refs.

  17. Control of quality and silo storage of sunflower seeds using near infrared technology

    International Nuclear Information System (INIS)

    Gonzalez-Martin, I.; Vilaescusa-Garcia, V.; Lopez-Gonzalez, F.; Oiz-Jimenez, C.; Lobos-Ortega, I. A.; Gordillo, B.; Hernandez-Hierro, J. M.

    2013-01-01

    This work assesses the application of near infrared spectroscopy technology for the quality control of sunflower seeds direct from farmers and from a storage silo. The results show that the analytical method employing near infrared spectroscopy can be used as a rapid and non-destructive tool for the determination of moisture, fat and high/low oleic acid contents in samples of sunflower seeds. The ranges obtained were comparable to those reported for classic chemical methods, and were between 4.6-21.4% for moisture; 38.4-49.6% for fat, and 60.0-93.1% for oleic acid expressed as percentage of total fatty acids. A stepwise discriminant analysis was performed to determine the most useful wavelengths for classifying sunflower seeds in terms of their (high/low) oleic acid composition. The discriminant model allows the acid contents, with a prediction rate of 90.5% for internal validation and of 89.4% for cross-validation. (Author) 23 refs.

  18. National security. Nuclear silo counterforce: calculating the Soviet--U.S. balance

    International Nuclear Information System (INIS)

    Anon.

    1975-01-01

    In recent months the nuclear counterforce work of Kosta Tsipis of the Stockholm International Peace Research Institute and the Massachusetts Institute of Technology has gained wide circulation. His arguments are grounded on comparing, for the Soviet Union and the U. S., the lethality (or K factor), rather than numbers of missiles or throw weight. The latter parameters, he claims, are irrelevant to a counterforce capability against ICBM silos, whereas K, which is a function of yield and accuracy, is a valid measure of potential counterforce performance. Using K factors, he reaches a number of conclusions indicating that the U. S. has and will continue to have counterforce superiority over the U.S.S.R. We have analyzed the counterforce situation also using K factors, but taking into account several parameters and arguments not included by Dr. Tsipis. Although some of the conclusions of our analysis agree with his, there are significant differences. In particular, we find that by 1985 the Soviet Union could equal the U. S. in counterforce lethality and could have a first-strike countersilo capability. (auth)

  19. Uso da prótese vertical expansível de titânio para costela no tratamento da cifose congênita em portadores de mielomeningocele torácica Uso de la prótesis vertical expansible de titanio para costilla en el tratamiento de la cifosis congénita en portadores de mielomeningocele torácico Use of vertical expandable prosthetic of titanium for the rib for treating congenital kyphosis in thoracic meningomyelocele patients

    Directory of Open Access Journals (Sweden)

    Guilherme Rebechi Zuiani

    2009-09-01

    Full Text Available OBJETIVO: avaliar os resultados clínicos e radiográficos pós-operatórios da correção de cifose congênita em pacientes com mielomeningocele de nível torácico, utilizando a prótese vertical expansível de titânio para costela (VEPTR. MÉTODOS: estudo retrospectivo de 19 pacientes com mielomeningocele torácica e cifose congênita submetidos a tratamento com VEPTR, entre Outubro de 2005 e Outubro de 2008, com avaliação radiográfica e clínica pré e pós-operatória imediata. Foram avaliadas também a duração do procedimento cirúrgico, a necessidade de transfusão sanguínea e as complicações pós-operatórias. RESULTADOS: a média de idade dos pacientes foi de 70 meses ou cinco anos e dez meses (32 a 130 meses. A média de seguimento dos pacientes foi de 13,5 meses (2 a 26 meses. A duração média do procedimento foi de 117 minutos (variação de 70 a 195 minutos. Todas as crianças adquiriram equilíbrio de tronco, sendo que 13 delas não apresentavam isto no pré-operatório. A média da cifose pré-operatória foi de 115° (80° a 150° e pós-operatória de 77° (50° a 104°, com porcentagem média de correção de 31,2% (1,1 a 61,5%. O desequilíbrio do tronco pré-operatório foi de 7,9 cm, em média (1,0 a 15,5 cm e pós-operatório de 3,4 cm (0 a 8 cm. A correção média desse desequilíbrio foi de 50,4% (0 a 100%. Com relação ao peso, no pré-operatório a média foi de 15,4 kg (8 a 30 kg, e no pós-operatório de 20,6 kg (8,5 a 35 kg. O ganho médio de peso foi de 36,6% (9,8 a 100%. Dos 19 pacientes, cinco (26,3% apresentaram complicações pós-operatórias. Nenhum paciente necessitou de transfusão sanguínea. CONCLUSÃO: a utilização do VEPTR nos pacientes portadores de mielomeningocele torácica com cifose congênita tem se mostrado uma alternativa eficaz e promissora de controle da deformidade em pacientes esqueleticamente imaturos.OBJETIVO: evaluar los resultados clínicos y radiográficos postoperatorios

  20. Chip-scale fluorescence microscope based on a silo-filter complementary metal-oxide semiconductor image sensor.

    Science.gov (United States)

    Ah Lee, Seung; Ou, Xiaoze; Lee, J Eugene; Yang, Changhuei

    2013-06-01

    We demonstrate a silo-filter (SF) complementary metal-oxide semiconductor (CMOS) image sensor for a chip-scale fluorescence microscope. The extruded pixel design with metal walls between neighboring pixels guides fluorescence emission through the thick absorptive filter to the photodiode of a pixel. Our prototype device achieves 13 μm resolution over a wide field of view (4.8 mm × 4.4 mm). We demonstrate bright-field and fluorescence longitudinal imaging of living cells in a compact, low-cost configuration.

  1. It's hard to play ball: A qualitative study of knowledge exchange and silo effects in public health.

    Science.gov (United States)

    Johnson, Rebecca; Grove, Amy; Clarke, Aileen

    2018-01-02

    Partnerships in public health form an important component of commissioning and implementing services, in England and internationally. In this research, we examine the views of staff involved in a City-wide health improvement programme which ran from 2009 to 2013 in England. We examine the practicalities of partnership work in community settings, and we describe some of barriers faced when implementing a large, multi-organisation health improvement programme. Qualitative, semi-structured interviews were performed. Purposive sampling was used to identify potential participants in the programme: programme board of directors, programme and project managers and intervention managers. Interviews were conducted one-to-one. We conducted a thematic analysis using the 'one sheet of paper' technique. This involved analysing data deductively, moving from initial to axial coding, developing categories and then identifying emerging themes. Fifteen interviews were completed. Three themes were identified. The first theme reflects how poor communication approaches hindered the ability of partnerships to deliver their aims and objectives in a range of ways and for a range of reasons. Our second theme reflects how a lack of appropriate knowledge exchange hindered decision-making, affected trust and contributed to protectionist approaches to working. This lack of shared, and communicated, understanding of what type of knowledge is most appropriate and in which circumstance made meaningful knowledge exchange challenging for decision-making and partnership-working in the City-wide health improvement programme. Theme three demonstrates how perceptions about silos in partnership-working could be problematic, but silos themselves were at times beneficial to partnerships. This revealed a mismatch between rhetoric and a realistic understanding of what components of the programme were functional and which were more hindrance than help. There were high expectations placed on the concept of

  2. Global Vertical Reference Frame

    Czech Academy of Sciences Publication Activity Database

    Burša, Milan; Kenyon, S.; Kouba, J.; Šíma, Zdislav; Vatrt, V.; Vojtíšková, M.

    2004-01-01

    Roč. 33, - (2004), s. 404-407 ISSN 1436-3445 Institutional research plan: CEZ:AV0Z1003909 Keywords : geopotential WO * vertical systems * global vertical frame Subject RIV: BN - Astronomy, Celestial Mechanics, Astrophysics

  3. New Perspectives on the “Silo Effect”: Initial Comparisons of Network Structures Across Public Health Collaboratives

    Science.gov (United States)

    H. Retrum, Jessica; M. Varda, Danielle

    2015-01-01

    Objectives. We explored to what extent “silos” (preferential partnering) persist in interorganizational boundaries despite advances in working across boundaries. We focused on organizational homophily and resulting silo effects within networks that might both facilitate and impede success in public health collaboratives (PHCs). Methods. We analyzed data from 162 PHCs with a series of exponential random graph models to determine the influence of uniform and differential homophily among organizations and to identify the propensity for partnerships with similar organizations. Results. The results demonstrated a low presence (8%) of uniform homophily among networks, whereas a greater number (30%) of PHCs contained varying levels of differential homophily by 1 or more types of organization. We noted that the higher frequency among law enforcement, nonprofits, and public health organizations demonstrated a partner preference with similar organizations. Conclusions. Although we identified only a modest occurrence of partner preference in PHCs, overall success in efforts to work across boundaries might be problematic when public health members (often leaders of PHCs) exhibit the tendency to form silos. PMID:25689195

  4. Discharge flow of a granular media from a silo: effect of the packing fraction and of the hopper angle

    Science.gov (United States)

    Benyamine, Mebirika; Aussillous, Pascale; Dalloz-Dubrujeaud, Blanche

    2017-06-01

    Silos are widely used in the industry. While empirical predictions of the flow rate, based on scaling laws, have existed for more than a century (Hagen 1852, translated in [1] - Beverloo et al. [2]), recent advances have be made on the understanding of the control parameters of the flow. In particular, using continuous modeling together with a mu(I) granular rheology seem to be successful in predicting the flow rate for large numbers of beads at the aperture (Staron et al.[3], [4]). Moreover Janda et al.[5] have shown that the packing fraction at the outlet plays an important role when the number of beads at the apeture decreases. Based on these considerations, we have studied experimentally the discharge flow of a granular media from a rectangular silo. We have varied two main parameters: the angle of the hopper, and the bulk packing fraction of the granular material by using bidisperse mixtures. We propose a simple physical model to describe the effect of these parameters, considering a continuous granular media with a dilatancy law at the outlet. This model predicts well the dependance of the flow rate on the hopper angle as well as the dependance of the flow rate on the fine mass fraction of a bidisperse mixture.

  5. Vertical axis wind turbines

    Science.gov (United States)

    Krivcov, Vladimir [Miass, RU; Krivospitski, Vladimir [Miass, RU; Maksimov, Vasili [Miass, RU; Halstead, Richard [Rohnert Park, CA; Grahov, Jurij [Miass, RU

    2011-03-08

    A vertical axis wind turbine is described. The wind turbine can include a top ring, a middle ring and a lower ring, wherein a plurality of vertical airfoils are disposed between the rings. For example, three vertical airfoils can be attached between the upper ring and the middle ring. In addition, three more vertical airfoils can be attached between the lower ring and the middle ring. When wind contacts the vertically arranged airfoils the rings begin to spin. By connecting the rings to a center pole which spins an alternator, electricity can be generated from wind.

  6. Neosporose bovina: avaliação da transmissão vertical e fração atribuível de aborto em uma população de bovinos no Estado do Rio Grande do Sul

    Directory of Open Access Journals (Sweden)

    Héber E. Hein

    2012-05-01

    Full Text Available O protozoário Nespora caninum é um parasito que causa grandes perdas reprodutivas e econômicas em bovinos no mundo inteiro. Os objetivos deste estudo foram verificar tanto a associação entre o histórico de aborto e a presença de anticorpos contra N. caninum, quanto a transmissão vertical como forma de manutenção da infecção nos rebanhos bovinos em regiões do Rio Grande do Sul, através da sorologia pareada de mães e filhas. Foi realizada amostragem de 60 propriedades distribuídas em duas regiões do Rio Grande do Sul, das quais foi coletado sangue de 40% dos animais presentes para a detecção de anticorpos anti-N. caninum por imunofluorescência indireta (IFI. Para verificar a relação aborto e soropositividade foi utilizado o teste de regressão logística univariada, e para sorologia de mães e filhas o teste de qui-quadrado de McNemar para dados pareados. Foram confrontados os dados de sorologia e aborto, sendo encontrada a frequência de 58,5% (24/41 de soropositivos quando havia histórico de aborto, e 16,4% (199/1215 dentre os sem histórico de aborto. Os animais soropositivos apresentaram um risco 7,21 (IC 95%, 3,65-14,32 vezes maior de possuir histórico de abortamento (estatística de Wald χ2=44,93, P<0,001. A fração atribuível à neosporose como causa de aborto na população em risco nas duas regiões foi estimada em 9,73% (λpop. O resultado sorológico de cada mãe foi pareado com o de sua filha e, pelo teste de qui-quadrado de McNemar (χ2=59,84, P<0,001, houve associação significativa entre as sorologias de mães e filhas, sugerindo transmissão vertical. Ressalta-se ainda a importância do acompanhamento sorológico para N. caninum, evitando assim manutenção de animais portadores que sirvam como reservatório do protozoário nas propriedades.

  7. Advice about the safety of graphite storage silos of Saint Laurent des Eaux facility; Avis sur la surete des silos de stockage de graphite de Saint Laurent des Eaux

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    This document is the safety analysis made by the national association of the local commissions of information about nuclear activities (ANCLI), about the safety of graphite storage silos of Saint Laurent des Eaux nuclear facility. The analysis covers: the operation safety and the accident hypothesis, the monitoring of indoor and outdoor contamination in routine situation, the geotechnical characteristics of the site environment, the isotopic inventory and the estimation of radioactivity in routine and accidental situation, the estimation of doses received by the population in accidental situation and the internal emergency plan. After examination of these different points, the scientific committee of the ANCLI considers that a new global evaluation of risks, which integrates more recent exposure data, has to be carried out. (J.S.)

  8. The Reclaim Screw in Mammoth Silos Operating on a Free Surface: Comparison Between Horizontal and Inclined Operation on Free Flowing Bulk Solids

    NARCIS (Netherlands)

    Oosterhuis, E.J.; Schott, Dingena; van Wijk, Arjen

    2004-01-01

    Although the screw conveyor, operating on a free surface, has been used for years as reclaim and storage equipment in mammoth silos, there is no documented knowledge about its spill characteristics. Research at Delft University of Technology together with ESI Eurosilo B.V. on the inclined use of the

  9. Effect of harvest time on fermentation profiles of maize ensiled in laboratory silos and determination of drying losses at 60°C

    DEFF Research Database (Denmark)

    Nielsen, Tina Skau; Kristensen, Niels Bastian; Weisbjerg, Martin Riis

    2007-01-01

    The objectives were to investigate the effect of premature ensiling of maize on alcohol fermentation in laboratory silos and the loss of fermentation products and glucose in silage following drying at 60°C for 48 h. During four consecutive weeks maize was harvested and ensiled for 60 days in vacuum-sealed...

  10. Escrita Escolar Brasileira: a escrita vertical

    Directory of Open Access Journals (Sweden)

    Carlos André Xavier Villela

    2014-12-01

    Full Text Available O exame grafoscópico visa essencialmente a determinar se duas escritas partiram ou não de um mesmo punho. A fim de buscar dados empíricos capazes de melhor embasar uma valoração de raridade, diversos pesquisadores se dedicaram ao estudo dos sistemas de escrita. O presente trabalho analisa algumas bibliografias nacionais e estrangeiras que descrevem como se deu o alvorecer da escrita vertical e sua implantação no universo escolar brasileiro. Foi a partir das últimas décadas do século XIX que alógrafos cursivos verticais começaram a ser utilizados para o ensino da escrita. Os novos sistemas, sob a denominação escrita vertical, tiveram presença marcante em todo o mundo ocidental, sendo até hoje os sistemas predominantes em diversos países.

  11. Aplicación de la norma EN 14491:2006 a los silos de acero cilíndricos para la protección frente a explosiones de polvo

    Directory of Open Access Journals (Sweden)

    Tascón, A.

    2012-06-01

    Full Text Available Dust explosions represent a serious hazard in industries and silo facilities that handle combustible materials. Venting devices are commonly used to try to mitigate the damage caused by any dust explosion. To calculate vent area size, the recommendations given in European standard EN 14491:2006 can be used. However, the protection of silos is not always simple, and frequently the installation of vents becomes technically difficult and costly. The aim of the present work was to analyse the application of standard EN 14491:2006 to cylindrical steel silos, remarking the existing difficulties and limitations and explaining some critical points in order to understand the aforementioned standard. In addition, the cost of protection by venting in silos was studied. Finally, the authors have provided some suggestions to solve the protection of silos, alternative methods to calculate vent areas and expected future trends in this field.

    Las explosiones de polvo representan un serio peligro en aquellas industrias y silos en los que se manejan materiales combustibles. Para mitigar los efectos de una posible explosión generalmente se utilizan dispositivos de venteo, que pueden dimensionarse siguiendo la norma europea EN 14491:2006. Sin embargo, frecuentemente surgen complicaciones que hacen que la instalación de venteos sea técnicamente complicada y muy costosa. El objetivo de este trabajo fue analizar la aplicación de la norma EN 14491:2006 a los silos metálicos cilíndricos, remarcando las dificultades y limitaciones existentes y explicando sus aspectos clave para poder aplicarla correctamente. También se ha calculado el coste que puede suponer la protección de silos mediante venteos. Finalmente, se proporcionan algunas sugerencias para afrontar la protección de silos, información sobre métodos alternativos de cálculo de venteos y tendencias de futuro en este campo.

  12. Vertical pump assembly

    International Nuclear Information System (INIS)

    Dohnal, M.; Rosel, J.; Skarka, V.

    1988-01-01

    The mounting is described of the drive assembly of a vertical pump for nuclear power plants in areas with seismic risk. The assembly is attached to the building floor using flexible and damping elements. The design allows producing seismically resistant pumps without major design changes in the existing types of vertical pumps. (E.S.). 1 fig

  13. Simulação do deslocamento de potássio em colunas verticais de solo não-saturado Potassium displacement simulation in vertical columns of unsaturated soil

    Directory of Open Access Journals (Sweden)

    Jarbas H. Miranda

    2005-12-01

    Full Text Available O estudo do transporte de água e potássio em solo não-saturado é importante, tanto do ponto de vista do ambiente quanto do econômico. Assim sendo, o uso da modelagem computacional é importante, pois permite de maneira precisa e rápida o monitoramento do deslocamento de solutos, importante na prevenção de impactos ao ambiente. No presente trabalho, teve-se o objetivo de avaliar a simulação do deslocamento do íon potássio em colunas de solo não-saturado, utilizando o modelo MIDI, bem como apresentar a determinação dos parâmetros de transporte do íon potássio em um Latossolo Vermelho-Amarelo, fase arenosa. Concluiu-se que o modelo foi capaz de simular de maneira satisfatória o perfil de umidade e o deslocamento do íon potássio.Water and solute transport studies in unsaturated soil are important for both economical and environmental points of view and, in this sense, it should be emphasized the increase of agricultural use of urban and industrial residues, to the water resources and fertilizers saving. Thus, the computational modeling use is important, because it allows the monitoring of solute displacement, necessary to the environmental impacts prevention in a precise and fast way. The main objective of the present work is to simulate the displacement of potassium ion in unsaturated soil columns, using the MIDI model, as well as to present transport parameters determination of the potassium ion in a Red Yellowish Latossol, sandy phase. The obtained results allowed concluding that the model was capable to adequately simulate the potassium ion displacement.

  14. Comportamento diário ao longo do período de alimentação do primeiro estágio do sistema francês de wetland vertical, em termos de remoção de matéria orgânica e amônia

    Directory of Open Access Journals (Sweden)

    Camila Maria Trein

    2018-01-01

    Full Text Available O objetivo desse trabalho foi avaliar o comportamento do potencial de nitrificação e remoção de matéria orgânica no primeiro estágio de um wetland construído vertical - sistema francês (WCV-SF, operando com dois leitos em paralelo, cada um com 7 dias de alimentação e 7 dias de repouso, sob condições climáticas brasileiras. A estação de tratamento avaliada está localizada no Centro de Pesquisa e Treinamento em Saneamento (CePTS da Universidade Federal de Minas Gerais e Companhia de Saneamento de Minas Gerais, UFMG/COPASA, na cidade de Belo Horizonte, Brasil. Complementando o monitoramento rotineiro praticado há anos neste sistema, efetuou-se um monitoramento intensivo da qualidade do afluente e do efluente do WCV-SF durante uma semana, por meio de análises físico-químicas, através de coletas simples diárias nos tempos de 5, 10, 15, 20, 30, 40 e 50 minutos depois do início de uma batelada. Durante o período de monitoramento foi possível observar a eficiência dessa etapa associada à decomposição da matéria orgânica, permanecendo satisfatória mesmo em períodos de sobrecarga. Com concentrações positivas de oxigênio no efluente, o desempenho do sistema ao longo dos 7 dias de alimentação apresentou eficiência média de remoção e 69% para DQO. Em termos de nitrogênio, a eficiência de remoção de N-NH4+ foi de 58% e a produção de N-NO3- diminuiu com o avanço dos dias de alimentação, reportando 20 mg L-1 no 2º dia e 11 mg L-1 no último. De uma forma geral, apesar de ter apenas duas unidades em paralelo, o sistema mostrou boa capacidade de receber esgoto bruto por um período de tempo maior de alimentação, reforçando os resultados obtidos no monitoramento rotineiro.

  15. Coordination in vertical jumping

    NARCIS (Netherlands)

    Bobbert, Maarten F.; van Ingen Schenau, Gerrit Jan

    1988-01-01

    The present study was designed to investigate for vertical jumping the relationships between muscle actions, movement pattern and jumping achievement. Ten skilled jumpers performed jumps with preparatory countermovement. Ground reaction forces and cinematographic data were recorded. In addition,

  16. Diafragmas horizontais de piso em madeira, confeccionados com chapas de OSB e vigas I, submetido ao carregamento vertical - DOI: 10.4025/actascitechnol.v29i2.579

    Directory of Open Access Journals (Sweden)

    Altevir Castro dos Santos

    2008-02-01

    Full Text Available Este trabalho aborda construções em madeira sob a ótica de sistemas com estruturas leves; apresenta an疝ise computacional por meio de modelagem pelo metodo de elementos finitos de diafragmas de piso e vigas I, submetidas a ensaio de flexão a quatro pontos. O objetivo geral é avaliar a resistência e a rigidez de diafragmas horizontais, construçõos em Sistemas Leves de Madeira, quando submetidos a ações verticais. As análises foram realizadas por meio do programa computacional SAP2000 e foram avaliadas as influencias dos seguintes parametros: espaçamento entre vigas que constituem os elementos de ossatura do diafragma horizontal e o espaçamento entre pregos de fixação do contrapiso, composto por chapas de OSB – Oriented Strand Board. Ao final do trabalho, comparam-se os resultados obtidos a partir das análises numérica e teórica, e são apresentadas algumas conclusões.

  17. Hybrid vertical cavity laser

    DEFF Research Database (Denmark)

    Chung, Il-Sug; Mørk, Jesper

    2010-01-01

    A new hybrid vertical cavity laser structure for silicon photonics is suggested and numerically investigated. It incorporates a silicon subwavelength grating as a mirror and a lateral output coupler to a silicon ridge waveguide.......A new hybrid vertical cavity laser structure for silicon photonics is suggested and numerically investigated. It incorporates a silicon subwavelength grating as a mirror and a lateral output coupler to a silicon ridge waveguide....

  18. Within plant distribution of Anthonomus grandis (Coleoptera: Curculionidae feeding and oviposition damages in cotton cultivars Distribuição vertical de botões florais com danos de alimentação e de oviposição de Anthonomus grandis (Coleoptera: Curculionidae em cultivares de algodoeiro

    Directory of Open Access Journals (Sweden)

    José Fernando Jurca Grigolli

    2013-02-01

    Full Text Available The feeding and oviposition behavior of boll weevil in new cotton cultivars is essential for an adequate management. The objective of this study was to evaluate the vertical distribution of squares punctured for feeding and oviposition of the pest in the cultivars NuOPAL, DeltaOPAL, FMT-701, FMX-910 and FMX-993, and record the most and least preferred times of feeding and oviposition. The number of squares used for boll weevil feeding and oviposition were evaluated weekly in three parts of plant canopy. It was observed that, regardless the cultivar, A. grandis preferred to lay eggs in squares located in the upper part and feed on squares in the middle and upper parts. The boll weevil preferred to feed on cultivar FMT-701 in the beginning of the period of cotton flowering and fruiting, and the cultivars NuOPAL, DeltaOPAL, FMX-910 and FMX-993 throughout the whole period of flowering and fruiting. A. grandis preferred to lay eggs on cultivars NuOPAL, FMT-701 and FMX-993 at the beginning and end of flowering and fruiting of plants, while the cultivars DeltaOPAL and FMX-910 are used for oviposition throughout the period of flowering and fruiting.O conhecimento do comportamento de alimentação e de oviposição de Anthonomus grandis em cultivares recentes de algodoeiro é essencial para seu manejo. Neste trabalho, objetivou-se avaliar a distribuição vertical de botões florais com orifícios de alimentação e de oviposição da praga nas cultivares NuOPAL, DeltaOPAL, FMT-701, FMX-910 e FMX-993, bem como registrar as épocas de maior e menor preferência alimentar e de oviposição. O experimento foi conduzido em Jaboticabal, SP, Brasil, safra 2010/2011. Foram realizadas avaliações semanais, baseadas no número de botões florais, utilizados para alimentação e para oviposição pelo bicudo-do-algodoeiro, em três regiões do dossel das plantas. Observou-se que A. grandis preferiu ovipositar em botões florais localizados no terço superior das

  19. Vertical and horizontal subsidiarity

    Directory of Open Access Journals (Sweden)

    Ivan V. Daniluk

    2016-02-01

    Full Text Available This article makes an attempt to analyze the principle of subsidiarity in its two main manifestations, namely vertical and horizontal, to outline the principles of relations between the state and regions within the vertical subsidiarity, and features a collaboration of the government and civil society within the horizontal subsidiarity. Scientists identify two types, or two levels of the subsidiarity principle: vertical subsidiarity and horizontal subsidiarity. First, vertical subsidiarity (or territorial concerning relations between the state and other levels of subnational government, such as regions and local authorities; second, horizontal subsidiarity (or functional concerns the relationship between state and citizen (and civil society. Vertical subsidiarity expressed in the context of the distribution of administrative responsibilities to the appropriate higher level lower levels relative to the state structure, ie giving more powers to local government. However, state intervention has subsidiary-lower action against local authorities in cases of insolvency last cope on their own, ie higher organisms intervene only if the duties are less authority is insufficient to achieve the goals. Horizontal subsidiarity is within the relationship between power and freedom, and is based on the assumption that the concern for the common good and the needs of common interest community, able to solve community members (as individuals and citizens’ associations and role of government, in accordance horizontal subsidiarity comes to attracting features subsidiarity assistance, programming, coordination and possibly control.

  20. Experimental analysis of ultrasonic signals in air-water vertical upward for void fraction measurement using neural networks; Analise experimental dos sinais ultra-sonicos em escoamentos verticais bifasicos para medicao da fracao de vazios atraves de redes neurais

    Energy Technology Data Exchange (ETDEWEB)

    Nishida, Milton Y.; Massignan, Joao P.D.; Daciuk, Rafael J.; Neves Junior, Flavio; Arruda, Lucia V.R. [Universidade Tecnologica Federal do Parana (UTFPR), Curitiba, PR (Brazil)

    2008-07-01

    Rheology of emulsion mixtures and void fraction measurements of multiphase flows requires proper instrumentation. Sometimes it is not possible to install this instrumentation inside the pipe or view the flow. Ultrasound technology has characteristics compatible with the requirements of the oil industry. It can assist the production of heavy oil. This study provides important information for an analysis of the feasibility of developing non-intrusive equipment. These probes can be used for measurement of multiphase void fraction and detect the flow pattern using ultrasound. Experiments using simulated upward air-water vertical two-phase flow show that there is a correlation between the acoustic attenuation and the concentration of the gas phase. Experimental data were obtained through the prototype developed for ultrasonic data acquisition. This information was processed and used as input parameters for a neural network classifier. Void fractions ({proportional_to}) were analyzed between 0% - 16%, in increments of 1%. The maximum error of the neural network for the classification of the flow pattern was 6%. (author)

  1. [Duane vertical surgical treatment].

    Science.gov (United States)

    Merino, M L; Gómez de Liaño, P; Merino, P; Franco, G

    2014-04-01

    We report 3 cases with a vertical incomitance in upgaze, narrowing of palpebral fissure, and pseudo-overaction of both inferior oblique muscles. Surgery consisted of an elevation of both lateral rectus muscles with an asymmetrical weakening. A satisfactory result was achieved in 2 cases, whereas a Lambda syndrome appeared in the other case. The surgical technique of upper-insertion with a recession of both lateral rectus muscles improved vertical incomitance in 2 of the 3 patients; however, a residual deviation remains in the majority of cases. Copyright © 2011 Sociedad Española de Oftalmología. Published by Elsevier Espana. All rights reserved.

  2. Vertical market participation

    DEFF Research Database (Denmark)

    Schrader, Alexander; Martin, Stephen

    1998-01-01

    Firms that operate at both levels of vertically related Cournot oligopolies will purchase some input supplies from independent rivals, even though they can produce the good at a lower cost, driving up input price for nonintegrated firms at the final good level. Foreclosure, which avoids this stra......Firms that operate at both levels of vertically related Cournot oligopolies will purchase some input supplies from independent rivals, even though they can produce the good at a lower cost, driving up input price for nonintegrated firms at the final good level. Foreclosure, which avoids...

  3. Vertical Protocol Composition

    DEFF Research Database (Denmark)

    Groß, Thomas; Mödersheim, Sebastian Alexander

    2011-01-01

    The security of key exchange and secure channel protocols, such as TLS, has been studied intensively. However, only few works have considered what happens when the established keys are actually used—to run some protocol securely over the established “channel”. We call this a vertical protocol.......e., that the combination cannot introduce attacks that the individual protocols in isolation do not have. In this work, we prove a composability result in the symbolic model that allows for arbitrary vertical composition (including self-composition). It holds for protocols from any suite of channel and application...

  4. Isoline curves obtained from vertical aerophotos

    OpenAIRE

    Barros, Zacarias Xavier de; Campos, Sérgio; Cardoso, Lincoln Gehring; Pollo, Ronaldo Alberto

    2000-01-01

    Objetiva-se, com este trabalho, obter curvas de nível a partir de fotografias aéreas verticais, utilizando-se de gráfico linear de correção, em áreas com diferentes classes de declividade. A análise estatística dos dados foi efetuada por meio de regressões múltiplas das variáveis, erro horizontal e erro vertical, em função das variáveis independentes: altitude; altitude e declividade. Os erros médios horizontais e verticais pouco dependem da altitude, bem como da altitude e declividade, induz...

  5. Avaliação cefalométrica das alterações verticais e ântero-posteriores em pacientes Classe II esquelética, tratados com aparelho extrabucal de tração cervical ou combinada Cephalometric evaluation of anteroposterior and vertical changes in skeletal Class II patients treated with cervical or combined traction

    Directory of Open Access Journals (Sweden)

    Márlio Vinícius de Oliveira

    2007-04-01

    Full Text Available OBJETIVO: avaliar cefalometricamente as alterações ântero-posteriores e verticais em pacientes Classe II esquelética (ANB > 5°, tratados com aparelho extrabucal cervical (grupo 1 associado a aparelho fixo do tipo Edgewise ou tratados com aparelho extrabucal de tração combinada (grupo 2 associado ao mesmo. METODOLOGIA: a amostra consistiu-se de 60 radiografias cefalométricas laterais obtidas nas fases pré-tratamento e pós-tratamento de 30 indivíduos leucodermas, sendo 13 do gênero masculino e 17 do feminino. A idade média dos 15 pacientes do grupo 1, no pré-tratamento, era de 10 anos e 7 meses, e no pós-tratamento era de 13 anos e 9 meses. Os 15 pacientes do grupo 2 apresentavam idade média, no pré-tratamento, de 11 anos e 5 meses e no pós-tratamento a idade média era de 14 anos e 9 meses. As medidas cefalométricas iniciais e finais foram analisadas e comparadas pelo teste t de Student. RESULTADOS E CONCLUSÕES: não houve alteração significante no padrão de crescimento facial durante o tratamento em nenhum dos grupos avaliados. Nos pacientes do grupo 2, que possuíam tendência de crescimento vertical (GoGn-SN> 36°, o aparelho extrabucal de tração combinada, mesmo não provocando efeito extrusivo sobre os molares superiores, não foi capaz de diminuir o ângulo do plano mandibular. A maxila apresentou uma restrição no seu deslocamento anterior e verticalmente manteve-se estável. A mandíbula expressou seu crescimento e deslocou-se anteriormente, porém manteve sua inclinação inalterada. A relação maxilomandibular apresentou uma melhora significante com redução sensível do ANB.AIM: To evaluate the antero-posterior and vertical changes in patients with skeletal Class II malocclusions (ANB > 5º by means of the cephalometry. The patients had been treated with either cervical traction device (Group 1 or combined traction device (Group 2 both in association with a Edgewise-type device. METHODS: The sample consisted

  6. Vertical Search Engines

    OpenAIRE

    Curran, Kevin; Mc Glinchey, Jude

    2017-01-01

    This paper outlines the growth in popularity of vertical search engines, their origins, the differences between them and well-known broad based search engines such as Google and Yahoo. We also discuss their use in business-to-business, their marketing and advertising costs, what the revenue streams are and who uses them.

  7. Vertical cavity laser

    DEFF Research Database (Denmark)

    2016-01-01

    The present invention provides a vertical cavity laser comprising a grating layer comprising an in-plane grating, the grating layer having a first side and having a second side opposite the first side and comprising a contiguous core grating region having a grating structure, wherein an index...

  8. Global Vertical Reference Frame

    Czech Academy of Sciences Publication Activity Database

    Burša, Milan; Kenyon, S.; Kouba, J.; Šíma, Zdislav; Vatrt, V.; Vojtíšková, M.

    -, č. 5 (2009), s. 53-63 ISSN 1801-8483 R&D Projects: GA ČR GA205/08/0328 Institutional research plan: CEZ:AV0Z10030501 Keywords : sea surface topography * satellite altimetry * vertical frames Subject RIV: BN - Astronomy, Celestial Mechanics, Astrophysics

  9. Efeitos de um programa de treinamento neuromuscular sobre o consumo máximo de oxigênio e salto vertical em atletas iniciantes de voleibol Los efectos de un programa de entrenamiento neuromuscular nel consumo máximo de oxígeno y salto vertical en atletas principiantes de voleyball Effects of a neuromuscular training program on the maximal Oxygen consumption and vertical jump in beginning volleyball players

    Directory of Open Access Journals (Sweden)

    Alexandre Altini Neto

    2006-02-01

    Full Text Available As alterações ocorridas na performance motora de jovens envolvidos em treinamentos especializados ainda não são muito claras. Este é um conhecimento de suma importância para a correta prescrição desses treinos. O objetivo deste estudo foi verificar a influência do treinamento nas variáveis neuromotoras e orgânicas de jovens atletas na modalidade voleibol em diferentes momentos do programa. Foram selecionadas nove atletas, do sexo feminino, da equipe infantil, do Clube de Campo de Piracicaba/SP, na faixa etária de 14 e 15 anos, para a realização dos testes: alcance de ataque e bloqueio e o teste de 1.000 metros, com o objetivo de avaliar, em três momentos distintos, o programa de treino sugerido. Foram realizadas quatro coletas de dados, a primeira na apresentação das atletas, a segunda no final da etapa geral, a terceira no final da etapa especial e a última no final do período competitivo. No período preparatório foram utilizados exercícios com o objetivo de melhorar o desempenho das atletas na realização das ações motoras do jogo. No competitivo foram realizados exercícios com o objetivo de manter os índices de rendimento alcançados anteriormente, priorizando os exercícios coletivos envolvendo a técnica e a tática da modalidade. Com base na análise estatística dos dados, obtida através do cálculo da média, desvio-padrão, nível de significância (p Todavía no están claras las alteraciones de la actuaciones deportivas de juventud involucrada en entrenamientos especializados. Éste es un conocimiento de suma importancia para la prescripción correcta de los entrenamientos. El objetivo de este estudio fue verificar la influencia del entrenamiento en las variables neuromotoras y orgánicas de atletas jóvenes en la modalidad de voleyball en momentos diferentes de un programa. Se seleccionaron 9 atletas, mujeres, del equipo infantil, del Club de Campo de Piracicaba/SP, con edades de 14 y 15 años, para el

  10. Vertical steam generator

    International Nuclear Information System (INIS)

    Cuda, F.; Kondr, M.; Kresta, M.; Kusak, V.; Manek, O.; Turon, S.

    1982-01-01

    A vertical steam generator for nuclear power plants and dual purpose power plants consists of a cylindrical vessel in which are placed heating tubes in the form upside-down U. The heating tubes lead to the jacket of the cylindrical collector placed in the lower part of the steam generator perpendicularly to its vertical axis. The cylindrical collector is divided by a longitudinal partition into the inlet and outlet primary water sections of the heating tubes. One ends of the heating tube leads to the jacket of the collector for primary water feeding and the second ends of the heating tubes into the jacket of the collector which feeds and offtakes primary water from the heating tubes. (B.S.)

  11. Vertical organic transistors.

    Science.gov (United States)

    Lüssem, Björn; Günther, Alrun; Fischer, Axel; Kasemann, Daniel; Leo, Karl

    2015-11-11

    Organic switching devices such as field effect transistors (OFETs) are a key element of future flexible electronic devices. So far, however, a commercial breakthrough has not been achieved because these devices usually lack in switching speed (e.g. for logic applications) and current density (e.g. for display pixel driving). The limited performance is caused by a combination of comparatively low charge carrier mobilities and the large channel length caused by the need for low-cost structuring. Vertical Organic Transistors are a novel technology that has the potential to overcome these limitations of OFETs. Vertical Organic Transistors allow to scale the channel length of organic transistors into the 100 nm regime without cost intensive structuring techniques. Several different approaches have been proposed in literature, which show high output currents, low operation voltages, and comparatively high speed even without sub-μm structuring technologies. In this review, these different approaches are compared and recent progress is highlighted.

  12. Dismantling the Justice Silos: avoiding the pitfalls and reaping the benefits of information-sharing between forensic science, medicine and law.

    Science.gov (United States)

    Kelty, Sally F; Julian, Roberta; Ross, Alastair

    2013-07-10

    Forensic science is increasingly relied on by police and the courts to exonerate the innocent and to establish links to crime. With this increased reliance the potential for unjust outcomes increases, especially in serious matters for two reasons. The more serious the matter, the more likely that evidence mishandling can lead to wrongful imprisonment, and the more likely the personnel involved will be multi-disciplinary (police, medicine, law, forensic science), and multi-organisational (Health, Justice, private legal/medical, police). The importance of identifying effective multi-organisational interactions was highlighted in the recent wrongful imprisonment of an Australian male for a sexual assault he did not commit. One factor that led to this unjust outcome was the justice silo effect: where forensic practitioners from different agencies operate in isolation (rarely communicating or sharing information/knowledge). In this paper we discuss findings from the Interfaces Project designed to assess the extent of the justice silos within Australia. We interviewed 103 police, forensic scientists, lawyers, judges, coroners, pathologists and forensic physicians Australian-wide. Five main themes were identified in the data: the silo effect was only partial and in each jurisdiction some form of inter-agency communication was actively occurring; inter-agency meetings were more common in homicide than sexual assault cases; forensic physicians were semi-invisible; there had been considerable momentum over the past ten years for practice improvement groups, and; practitioners gain more benefits than pitfalls from inter-agency information-sharing. Based on these findings, five recommendations are made for improving practice. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

  13. Dismantling the justice silos: Flowcharting the role and expertise of forensic science, forensic medicine and allied health in adult sexual assault investigations.

    Science.gov (United States)

    Kelty, Sally F; Julian, Roberta; Bruenisholz, Eva; Wilson-Wilde, Linzi

    2018-04-01

    Forensic science is increasingly used to help exonerate the innocent and establishing links between individuals and criminal activities. With increased reliance on scientific services provided by multi-disciplinary (police, medicine, law, forensic science), and multi-organisational in the private and government sectors (health, justice, legal, police) practitioners, the potential for miscommunication resulting unjust outcomes increases. The importance of identifying effective multi-organisational information sharing is to prevent the 'justice silo effect'; where practitioners from different organisations operate in isolation with minimal or no interaction. This paper presents the findings from the second part of the Interfaces Project, an Australia-wide study designed to assess the extent of the justice silos. We interviewed 121 police, forensic scientists, lawyers, judges, coroners, pathologists and forensic physicians. The first paper published in 2013 presented two key findings: first investigative meetings were rare in adult sexual assault cases; second many medical practitioners were semi-invisible in case decision-making with this low level of visibility being due to lawyers, forensic scientists or police not being aware of the role/expertise medical practitioners offer. These findings led to the development of a flowchart model for adult sexual assault that highlights the range of agencies and practitioners typically involved in sexual assault. The rationale for the flowchart is to produce a visual representation of a typical sexual assault investigative process highlighting where and who plays a role in order to minimise the risk of justice silos. This is the second paper in a series of two. Copyright © 2018 Elsevier B.V. All rights reserved.

  14. Relato de caso: transmissão vertical de dengue Case report: vertical dengue infection

    Directory of Open Access Journals (Sweden)

    Samara L. C. Maroun

    2008-12-01

    Full Text Available OBJETIVOS: Relatar um caso de transmissão vertical de dengue ocorrido durante epidemia de 2008 pelo vírus tipo II no Rio de Janeiro e revisar a literatura sobre transmissão vertical de dengue. DESCRIÇÃO: Relatamos um caso de transmissão vertical de dengue. Recém-nascido a termo do sexo feminino, peso de nascimento de 3.940 g, foi admitida na unidade de terapia intensiva neonatal com rash cutâneo, hipoatividade e febre no quinto dia de vida. O hemograma evidenciava plaquetopenia importante (38.000 plaquetas. A mãe apresentou quadro clínico compatível com dengue 3 dias antes do parto. Foram colhidos então IgM para dengue da mãe e do recém-nascido, realizados pelo método de ELISA, sendo positivos em ambos. Dengue tipo 2 foi detectado no recém-nascido através de reação em cadeia da polimerase. COMENTÁRIOS: Este relato enfatiza a importância do pediatra estar alerta para a possibilidade de transmissão vertical de dengue iniciando precocemente o tratamento.OBJECTIVES: To report a case of vertical dengue infection in a newborn from Rio de Janeiro, Brazil, and to review the literature concerning this problem. DESCRIPTION: We report a case of vertical dengue infection. Female neonate, birth weight 3,940 g, term, was admitted to a neonatal intensive care unit on the fifth day of life with fever and erythematous rash. Her mother had had dengue fever 3 days before delivery. Her platelet count was 38,000, dropping to 15,000. She did not have any hemorrhagic episodes, including cerebral hemorrhages. Anti-dengue antibodies (IgM were positive in the mother and infant. Dengue type 2 was detected in the infant using polymerase chain reaction. COMMENTS: This report emphasizes that pediatricians should be aware of the possibility of vertical dengue infection so that early management can be instituted.

  15. Vertical axis wind turbine

    International Nuclear Information System (INIS)

    Obretenov, V.; Tsalov, T.; Chakarov, T.

    2012-01-01

    In recent years, the interest in wind turbines with vertical axis noticeably increased. They have some important advantages: low cost, relatively simple structure, reliable packaging system of wind aggregate long period during which require no maintenance, low noise, independence of wind direction, etc.. The relatively low efficiency, however, makes them applicable mainly for small facilities. The work presents a methodology and software for approximately aerodynamic design of wind turbines of this type, and also analyzed the possibility of improving the efficiency of their workflow

  16. Vertical vector face lift.

    Science.gov (United States)

    Somoano, Brian; Chan, Joanna; Morganroth, Greg

    2011-01-01

    Facial rejuvenation using local anesthesia has evolved in the past decade as a safer option for patients seeking fewer complications and minimal downtime. Mini- and short-scar face lifts using more conservative incision lengths and extent of undermining can be effective in the younger patient with lower face laxity and minimal loose, elastotic neck skin. By incorporating both an anterior and posterior approach and using an incision length between the mini and more traditional face lift, the Vertical Vector Face Lift can achieve longer-lasting and natural results with lesser cost and risk. Submentoplasty and liposuction of the neck and jawline, fundamental components of the vertical vector face lift, act synergistically with superficial musculoaponeurotic system plication to reestablish a more youthful, sculpted cervicomental angle, even in patients with prominent jowls. Dramatic results can be achieved in the right patient by combining with other procedures such as injectable fillers, chin implants, laser resurfacing, or upper and lower blepharoplasties. © 2011 Wiley Periodicals, Inc.

  17. Vertical organic transistors

    International Nuclear Information System (INIS)

    Lüssem, Björn; Günther, Alrun; Fischer, Axel; Kasemann, Daniel; Leo, Karl

    2015-01-01

    Organic switching devices such as field effect transistors (OFETs) are a key element of future flexible electronic devices. So far, however, a commercial breakthrough has not been achieved because these devices usually lack in switching speed (e.g. for logic applications) and current density (e.g. for display pixel driving). The limited performance is caused by a combination of comparatively low charge carrier mobilities and the large channel length caused by the need for low-cost structuring. Vertical Organic Transistors are a novel technology that has the potential to overcome these limitations of OFETs. Vertical Organic Transistors allow to scale the channel length of organic transistors into the 100 nm regime without cost intensive structuring techniques. Several different approaches have been proposed in literature, which show high output currents, low operation voltages, and comparatively high speed even without sub-μm structuring technologies. In this review, these different approaches are compared and recent progress is highlighted. (topical review)

  18. Fate of Escherichia coli O26 in Corn Silage Experimentally Contaminated at Ensiling, at Silo Opening, or after Aerobic Exposure, and Protective Effect of Various Bacterial Inoculants▿

    Science.gov (United States)

    Dunière, Lysiane; Gleizal, Audrey; Chaucheyras-Durand, Frédérique; Chevallier, Isabelle; Thévenot-Sergentet, Delphine

    2011-01-01

    Shiga toxin-producing Escherichia coli (STEC) strains are responsible for human illness. Ruminants are recognized as a major reservoir of STEC, and animal feeds, such as silages, have been pointed out as a possible vehicle for the spread of STEC. The present study aimed to monitor the fate of pathogenic E. coli O26 strains in corn material experimentally inoculated (105 CFU/g) during ensiling, just after silo opening, and after several days of aerobic exposure. The addition of 3 bacterial inoculants, Propionibacterium sp., Lactobacillus buchneri, and Leuconostoc mesenteroides (106 CFU/g), was evaluated for their abilities to control these pathogens. The results showed that E. coli O26 could not survive in corn silage 5 days postensiling, and the 3 inoculants tested did not modify the fate of pathogen survival during ensiling. In the case of direct contamination at silo opening, E. coli O26 could be totally eradicated from corn silage previously inoculated with Leuconostoc mesenteroides. The combination of proper ensiling techniques and the utilization of selected bacterial inoculants appears to represent a good strategy to guarantee nutritional qualities of cattle feed while at the same time limiting the entry of pathogenic E. coli into the epidemiological cycle to improve the microbial safety of the food chain. PMID:21984243

  19. Microbial processes in the final repository, the silo part. Theoretical approach and preliminary experiments on the biodegradation of bitumen. Part 1

    International Nuclear Information System (INIS)

    Roffey, R.; Hjalmarsson, K.

    1984-01-01

    On Commission of SKBF/KBS the microbial processes that are likely to occur in the silo part of SFR, the final repository for medium- and low-level nuclear wastes, have been put together. The experimental studies concerning microbial degradation of bitumen are described. From a microbial point of view it is the biodegradation of bitumen that constitutes the greatest risk in the silo part of SFR. The degradation, aerobic as well as anaerobic, leads to production of carbon dioxide which might cause a decrease in pH to such an extent that hydrogen-gas producing corrosion of metal could occur. This production of gas can cause an increase in internal pressure of the repository. A culture of bacteria able to degrade bitumen aerobically has been enriched. Uptil now no culture degrading bitumen under anaerobic conditions have been obtained. When making a risk assessment of the SFR at the present time it is not possible to completely disregard the microbial activity. An account is also given for some international contacts in this area. 11 references

  20. From silos to synergy.

    Science.gov (United States)

    Treadwell, Janet; Levermann, Laurie; Soffar, Gail; Giardino, Angelo

    2007-08-01

    Texas Children's Health Plan (TCHP) redesigned its approach to care management in an effort to provide support for member-centric care and the medical home. The changes in process and structure focused on connecting information and programs to promote care for members in a collaborative manner and taking advantage of the synergy between staff, programming, and the physician practices serving health plan membership. The results brought about an improvement in job satisfaction, positive change in the medical-loss ratio, and new innovations to support preventive and chronic care service delivery needs of the TCHP membership.

  1. Desempenho de um “wetland” vertical aplicado ao tratamento do efluente de um filtro anaeróbio em uma estação de tratamento de águas cinzas claras visando o reúso não potável em edificações residenciais

    OpenAIRE

    Sarnaglia, Solange Aparecida Alho

    2014-01-01

    No tratamento de água cinza com vistas ao reúso predial os “wetlands” têm se mostrado como uma opção viável devido à boa remoção de poluentes, ao baixo custo de implantação e operação, além do baixo impacto ambiental quando comparados a outros sistemas. O presente estudo teve como objetivo caracterizar físico-química e microbiologicamente a água cinza clara gerada em um edifício universitário avaliar a influência das cargas hidráulica e orgânica na remoção de matéria orgânica, turbidez e de c...

  2. The online distribution strategy of luxury products and their vertical extensions

    OpenAIRE

    Marliot, Sylvain Jean-Claude

    2014-01-01

    Uma importante tendência do mercado de luxo é a extensão de marca em um novo segmento de mercado por meio da chamada extensão vertical, que pode ser para cima ou para baixo. Em outras palavras, significa que a organização passa a atuar em um novo segmento dentro de uma mesma categoria de produtos, mas com diferente público-alvo que sua marca original. Nesse processo, a empresa inicia atividade em um novo segmento com diferente nível de luxo. A distribuição é um aspecto fundamental do compo...

  3. Aplicação da alvenaria estrutural em sistemas de armazenamento de produtos agrícolas a granel Applying structural masonry for granular material storage systems

    Directory of Open Access Journals (Sweden)

    José F. de A Marques Neto

    2011-02-01

    Full Text Available O armazenamento de produtos agrícolas cumpre um papel importante no agronegócio. Observa-se uma tendência cada vez maior em se trabalhar com produtos a granel, em grandes volumes. Visando a uma concepção construtiva racional e econômica, o presente trabalho propõe um sistema misto em concreto armado e alvenaria estrutural aplicado a silos para armazenagem de produto agrícola a granel. No projeto proposto, o silo é composto de células em alvenaria estrutural, geminadas duas a duas na largura e com um número variável de células no comprimento, em função do volume desejado de armazenagem. Esse sistema simétrico favorece a racionalidade operacional, garantindo a continuidade entre os fluxos de recebimento e de expedição. O fundo da célula é em forma de tremonha dupla troncopiramidal, com saída central, construída em painéis treliçados pré-moldados. A sustentação das células e das tremonhas é feita através de vigas e de pilares de concreto armado. O isolamento térmico necessário para que a qualidade do produto armazenado seja garantida é estabelecido pela utilização de telhas trapezoidais de aço galvanizado, tanto na cobertura como nos fechamentos laterais. A fim de ilustrar o presente trabalho, um exemplo de silo utilizando o sistema proposto é apresentado, e a viabilidade da concepção construtiva adotada é analisada.The storage of granular materials has had an important role in the agribusiness. Storing granular materials in silos, instead of in bags or big-bags, has been an increase tendency. Aiming at an economic and rational solution for storing granular materials this paper presents an alternative design: a multi-cell silo group composed of reinforced masonry rectangular cells coupled two by two in width, and a variable number of cells in length according to the volume of desired storage. Such symmetrical system benefits the loading and the unloading operations, and guarantees the continuity between the

  4. Ventilation system design for control of radioactive airborne particulates during the decontamination and dismantlement (D&D) of the plant one ore silos

    Energy Technology Data Exchange (ETDEWEB)

    Williams, J.E. III [Parsons Environmental Services, Inc., Fairfield, OH (United States)

    1995-02-01

    The Fernald facility is a 1,050-acre site located in southwest Ohio. In July 1989, production was discontinued. The Fernald site has completed its site wide Remedial Investigation/Feasibility Study (RI/FS). In the RI/FS, a variety of response actions where identified for various Operable Unit (OU) area at the FEMP. Of the many response actions in progress at the FEMP, removal action No.17 (in OU-3), known as the Decontamination & Dismantlement (D&D) of the Plant One Ore Silos, exemplifies a state of the art nuclear air cleaning system. Constructed in 1953, Plant 1 was the Sampling Plant for the FEMP site and the receiving point for incoming ores and residues to be processed for the production of uranium metal. The contents were removed except for small amounts of residue. The objective of the removal action is to mitigate the potential for release of contaminants or potential hazards presented by the Plant One Ore Silos until total remediation of the OU-3 area is performed. All D&D work activity is controlled to prevent the release of contamination. The work areas are isolated with physical barriers and a ventilated containment system. The containment for the silo structures consists of scaffolding and polyethylene fabric sheeting (area containment). The containment material is flame-retardant and corrosion resistant in compliance with DOE Order 6430.1A. Ventilation air is filtered through portable air cleaning devices equipped with pre-filters and High Efficiency Particulate Air (HEPA) filters and monitored before discharge to the atmosphere. This paper will illustrate the design of the ventilation in compliance with ASME codes AG-1, N509, N510, and DOE order 6430.1A. The materials of construction and design of the ductwork, stack, portable nuclear air cleaning units, and the type of air sampler used will be addressed. Also, this paper will describe the phase approach to dismantlement and ventilation that resulted in reduced costs and waste minimization.

  5. Specific effects of small doses of 60Co-γ-radiation applied to the seeds before sowing on the yield of silo maize (small and large plot field experiments)

    International Nuclear Information System (INIS)

    Degner, W.; Schacht, W.; Koepp, R.

    1975-01-01

    Dry seeds of silo maize were cultivated under outside conditions after fractionated irradiation with low radiation doses. The yields of irradiated and unirradiated seeds were compared. The resistance of irradiated and unirradiated plants and ensilage were also studied and compared. The findings are discussed. (GSE/AK) [de

  6. Method of aeration disinfecting and drying grain in bulk and pretreating seeds and a transverse blow silo grain dryer therefor

    Science.gov (United States)

    Danchenko, Vitaliy G [Dnipropetrovsk, UA; Noyes, Ronald T [Stillwater, OK; Potapovych, Larysa P [Dnipropetrovsk, UA

    2012-02-28

    Aeration drying and disinfecting grain crops in bulk and pretreating seeds includes passing through a bulk of grain crops and seeds disinfecting and drying agents including an ozone and air mixture and surrounding air, subdividing the disinfecting and drying agents into a plurality of streams spaced from one another in a vertical direction, and passing the streams at different heights through levels located at corresponding heights of the bulk of grain crops and seeds transversely in a substantially horizontal direction.

  7. Vertical guidance of shearers

    International Nuclear Information System (INIS)

    Pocock, J.

    1985-01-01

    Mining Engineers have always been aware of the basic need to avoid contamination of the mined product, by controlling the cutting horizon at the coal face. The ability to maintain the optimum cutting horizon results in more effective roof control and ensures a safer and more efficient working environment, for men and machinery. The cost of treatment in the surface coal preparation plant is reduced. Transportation through the total mine system of material finally destined for the spoil heap is minimised. A reduction in product contamination is achieved and makes more effective use of the mine capacity. These benefits make possible significant improvements in productivity and financial returns. Exploitation of micro computer based systems has enabled the successful development of equipment which employs sensors to detect the very low natural gamma radiation from roof strata; to determine and allow control of the position of the cut relative to the roof and floor. This paper reviews the experience gained by the National Coal Board, particularly in South Yorkshire Area, with the vertical steering of ranging drum shearers. It outlines the benefits and considers the future for this technology and its contribution to total coal face automation

  8. TRATAMIENTO DE AGUAS RESIDUALES MEDIANTE REACTORES ANAERÓBICOS DE PLACAS VERTICALES PARALELAS EN ACRÍLICO TRATAMENTO DE ÁGUAS RESIDUÁRIAS POR REATORES ANAERÓBIOS DE PLACAS VERTICAIS PARALELAS EM ACRÍLICO WASTEWATER TREATMENT BY ANAEROBIC REACTORS OF VERTICAL PARALLEL PLATES IN ACRYLIC

    Directory of Open Access Journals (Sweden)

    Guillermo Chaux F

    2011-12-01

    Full Text Available Algunos filtros anaeróbicos con lecho de piedra construidos en el departamento del Cauca (Colombia, están presentando problemas de colmatación. Si se reemplaza la piedra por placas verticales paralelas, se elimina el problema de obstrucción. Este documento presenta el desarrollo y resultados de una investigación que evaluó a escala de laboratorio el potencial de los reactores anaeróbicos de placas verticales paralelas en acrílico para remover contaminantes (materia orgánica y sólidos suspendidos. El reactor anaeróbico de placas paralelas en acrílico se desempeñó como tratamiento secundario; se alimentó con agua residual efluente de un Tanque Imhoff con concentraciones medias de 156 ± 14 mg/L de DB05, 438 ± 32 mg/L de DQO y 98 ±22 mg/L de sólidos suspendidos totales. Las remociones de DQO y DB05 en el reactor sobrepasan el 50% y la remoción de sólidos suspendidos sobrepasó el 60% para tiempos de detención de 24 horas. La facilidad en la operación del reactor lo hace viable como tratamiento biológico anaeróbico de aguas residuales previamente decantadasAlguns filtros anaeróbios com recheio de pedras construída no departamento de Cauca (Colombia estão apresentando problemas de obstrução. Se a pedra é substituída por placas verticais paralelas, evita o problema da obstrução. Este artigo apresenta o desenvolvimento e os resultados e no estudo realizado em escala de laboratório que avaliaram o potencial de reatores anaeróbios de placas verticais paralelas em acrílico para remover os contaminantes (sólidos suspensos e matéria orgânica. 0 reator anaeróbio de placas paralelas de acrílico serviu como tratamento secundário; foi alimentado com água residuária do efluente de um tanque Imhoff com concentrações médias de 156 ± 14 mg/L DB05, 438 ± 32 mg/L de DQO e 98 ±22 mg/L de sólidos suspensos totais. A remoção de DQO e DB05 no reator são mais de 50% ea remoção de sólidos em suspensão superior a 60

  9. Trade Liberalisation and Vertical Integration

    DEFF Research Database (Denmark)

    Bache, Peter Arendorf; Laugesen, Anders

    We build a three-country model of international trade in final goods and intermediate inputs and study the relation between different types of trade liberalisation and vertical integration. Firms are heterogeneous with respect to both productivity and factor intensity as observed in data. Final......-good producers face decisions on exporting, vertical integration of intermediate-input production, and whether the intermediate-input production should be offshored to a low-wage country. We find that the fractions of final-good producers that pursue either vertical integration, offshoring, or exporting are all...... increasing when intermediate-input or final-goods trade is liberalised and when the fixed cost of vertical integration is reduced. At the same time, one observes firms that shift away from either vertical integration, offshoring, or exporting. Further, we provide guidance for testing the open...

  10. Inservice testing of vertical pumps

    International Nuclear Information System (INIS)

    Cornman, R.E. Jr.; Schumann, K.E.

    1994-01-01

    This paper focuses on the problems that may occur with vertical pumps while inservice tests are conducted in accordance with existing American Society of Mechanical Engineers Code, Section XI, standards. The vertical pump types discussed include single stage, multistage, free surface, and canned mixed flow pumps. Primary emphasis is placed on the hydraulic performance of the pump and the internal and external factors to the pump that impact hydraulic performance. In addition, the paper considers the mechanical design features that can affect the mechanical performance of vertical pumps. The conclusion shows how two recommended changes in the Code standards may increase the quality of the pump's operational readiness assessment during its service life

  11. Vertical axis wind turbine airfoil

    Science.gov (United States)

    Krivcov, Vladimir; Krivospitski, Vladimir; Maksimov, Vasili; Halstead, Richard; Grahov, Jurij Vasiljevich

    2012-12-18

    A vertical axis wind turbine airfoil is described. The wind turbine airfoil can include a leading edge, a trailing edge, an upper curved surface, a lower curved surface, and a centerline running between the upper surface and the lower surface and from the leading edge to the trailing edge. The airfoil can be configured so that the distance between the centerline and the upper surface is the same as the distance between the centerline and the lower surface at all points along the length of the airfoil. A plurality of such airfoils can be included in a vertical axis wind turbine. These airfoils can be vertically disposed and can rotate about a vertical axis.

  12. Trade Liberalisation and Vertical Integration

    DEFF Research Database (Denmark)

    Bache, Peter Arendorf; Laugesen, Anders Rosenstand

    We build a three-country model of international trade in final goods and intermediate inputs and study the relation between four different types of trade liberalisation and vertical integration. Firms are heterogeneous with respect to both productivity and factor (headquarter) intensity. Final......-good producers face decisions on exporting, vertical integration of intermediate-input production, and whether the intermediate-input production should be offshored to a low-wage country. We find that the fractions of final-good producers that pursue either vertical integration, offshoring, or exporting are all...... increasing when intermediate-input trade or final-goods trade is liberalised. Finally, we provide guidance for testing the open-economy property rights theory of the firm using firm-level data and surprisingly show that the relationship between factor (headquarter) intensity and the likelihood of vertical...

  13. The TEXT upgrade vertical interferometer

    International Nuclear Information System (INIS)

    Hallock, G.A.; Gartman, M.L.; Li, W.; Chiang, K.; Shin, S.; Castles, R.L.; Chatterjee, R.; Rahman, A.S.

    1992-01-01

    A far-infrared interferometer has been installed on TEXT upgrade to obtain electron density profiles. The primary system views the plasma vertically through a set of large (60-cm radialx7.62-cm toroidal) diagnostic ports. A 1-cm channel spacing (59 channels total) and fast electronic time response is used, to provide high resolution for radial profiles and perturbation experiments. Initial operation of the vertical system was obtained late in 1991, with six operating channels

  14. Evaluation of <em>HER2em> Gene Amplification in Breast Cancer Using Nuclei Microarray <em>in em>S>itu em>Hybridization

    Directory of Open Access Journals (Sweden)

    Xuefeng Zhang

    2012-05-01

    Full Text Available Fluorescence<em> em>>in situ em>hybridization (FISH assay is considered the “gold standard” in evaluating <em>HER2/neu (HER2em> gene status. However, FISH detection is costly and time consuming. Thus, we established nuclei microarray with extracted intact nuclei from paraffin embedded breast cancer tissues for FISH detection. The nuclei microarray FISH (NMFISH technology serves as a useful platform for analyzing <em>HER2em> gene/chromosome 17 centromere ratio. We examined <em>HER2em> gene status in 152 cases of invasive ductal carcinomas of the breast that were resected surgically with FISH and NMFISH. <em>HER2em> gene amplification status was classified according to the guidelines of the American Society of Clinical Oncology and College of American Pathologists (ASCO/CAP. Comparison of the cut-off values for <em>HER2em>/chromosome 17 centromere copy number ratio obtained by NMFISH and FISH showed that there was almost perfect agreement between the two methods (κ coefficient 0.920. The results of the two methods were almost consistent for the evaluation of <em>HER2em> gene counts. The present study proved that NMFISH is comparable with FISH for evaluating <em>HER2em> gene status. The use of nuclei microarray technology is highly efficient, time and reagent conserving and inexpensive.

  15. A New Natural Lactone from <em>Dimocarpus> <em>longan> Lour. Seeds

    Directory of Open Access Journals (Sweden)

    Zhongjun Li

    2012-08-01

    Full Text Available A new natural product named longanlactone was isolated from <em>Dimocarpus> <em>longan> Lour. seeds. Its structure was determined as 3-(2-acetyl-1<em>H>-pyrrol-1-yl-5-(prop-2-yn-1-yldihydrofuran-2(3H-one by spectroscopic methods and HRESIMS.

  16. DEM study of granular discharge rate through a vertical pipe with a bend outlet in small absorber sphere system

    Energy Technology Data Exchange (ETDEWEB)

    Li, Tianjin, E-mail: tjli@tsinghua.edu.cn; Zhang, He; Liu, Malin; Huang, Zhiyong; Bo, Hanliang; Dong, Yujie

    2017-04-01

    Highlights: • The work concerns granular flow in a vertical pipe with a bend. • Discharge rate fluctuation in vertical pipe are mainly from velocity fluctuation. • Steady discharge rate decreases rapidly and saturates with μ{sub s} increasing. • Steady discharge rate W{sub s} still obey the 5/2 power law of pipe internal diameter. • A correlation developed for steady discharge rate for this new geometry. - Abstract: Absorber sphere pneumatic conveying is a special application of pneumatic conveying technique in the pebble bed High Temperature Gas-Cooled Reactor (HTGR or HTR). Granular discharge through a vertical pipe with a bend outlet is one of the control modes to determine solid mass flowrate which is an important parameter for the design of absorber sphere pneumatic conveying. Granular discharge rate through the vertical pipe with a bend outlet in the small absorber sphere system are investigated by discrete element method simulation. The effect of geometry parameters on discharge rate, the discharge rate fluctuation in the vertical pipe, and the effect of friction on steady discharge rate (W{sub s}) are analyzed and discussed. The phenomena of discharge rate fluctuation in the vertical pipe are observed, which are mainly resulted from the evolution of the average downward granular velocity. The steady discharge rate decreases rapidly with sliding friction coefficient increasing from 0.125 to 0.5, and gradually saturates with the friction coefficient further increasing from 0.5 to 1. It is interesting that the linear relation between W{sub s}{sup 2/5} and pipe internal diameter D with zero intercept are found for the vertical pipe discharge with a bend outlet, which is different from the orifice discharge through a hopper or silo with none-zero intercept. A correlation similar to Beverloo’s correlation is developed to predict the steady discharge rate through the vertical pipe with a bend outlet. These results are helpful for the design of sphere

  17. Decree no. 2005-78 from January 26, 2005, authorizing the Atomic Energy Commission to proceed to the definitive shutdown and dismantling operations of the nuclear facility no.20, named Siloe reactor, in the Grenoble city territory (Isere)

    International Nuclear Information System (INIS)

    2005-02-01

    On March 19, 2003, the French atomic energy commission (CEA) addressed an authorization demand for the definitive shutdown and dismantling of the Siloe reactor. After a technical and administrative instruction of this demand by the French nuclear safety authority (ASN), a project of decree has been presented on July 6, 2004 at the permanent section of the inter-ministry commission of basic nuclear facilities. The commission gave its favourable judgment which is the object of this decree. (J.S.)

  18. Reference Gene Selection in the Desert Plant <em>Eremosparton songoricuem>m>

    Directory of Open Access Journals (Sweden)

    Dao-Yuan Zhang

    2012-06-01

    Full Text Available <em>Eremosparton songoricum em>(Litv. Vass. (<em>E. songoricumem> is a rare and extremely drought-tolerant desert plant that holds promise as a model organism for the identification of genes associated with water deficit stress. Here, we cloned and evaluated the expression of eight candidate reference genes using quantitative real-time reverse transcriptase polymerase chain reactions. The expression of these candidate reference genes was analyzed in a diverse set of 20 samples including various <em>E. songoricumem> plant tissues exposed to multiple environmental stresses. GeNorm analysis indicated that expression stability varied between the reference genes in the different experimental conditions, but the two most stable reference genes were sufficient for normalization in most conditions.<em> EsEFem> and <em>Esα-TUB> were sufficient for various stress conditions, <em>EsEF> and <em>EsACT> were suitable for samples of differing germination stages, and <em>EsGAPDH>and <em>Es>UBQ em>were most stable across multiple adult tissue samples. The <em>Es18Sem> gene was unsuitable as a reference gene in our analysis. In addition, the expression level of the drought-stress related transcription factor <em>EsDREB2em>> em>verified the utility of<em> E. songoricumem> reference genes and indicated that no single gene was adequate for normalization on its own. This is the first systematic report on the selection of reference genes in <em>E. songoricumem>, and these data will facilitate future work on gene expression in this species.

  19. Vertical distribution of pelagic photosynthesis

    DEFF Research Database (Denmark)

    Lyngsgaard, Maren Moltke

    chlorophyll maxima (DCM) to be a general feature in the ocean. Today, it is generally accepted that DCMs occur in most of our oceans still, despite this empirical knowledge, subsurface primary production is still largely ignored in marine science. The work included in this PhD examines the vertical...... each of the three regions combined with 15 years of survey data for the Baltic Sea transition zone. Overall, the results of this PhD work show that the vertical distribution of phytoplankton and their activity is important for the understanding, dynamics and functioning of pelagic ecosystems. It, thus......, emphasizes that future research and modelling exercises aimed at improving understanding of pelagic ecosystems and their role in the global ocean should include a consideration of the vertical heterogeneity in phytoplankton distributions and activity....

  20. Neglected locked vertical patellar dislocation

    Science.gov (United States)

    Gupta, Rakesh Kumar; Gupta, Vinay; Sangwan, Sukhbir Singh; Kamboj, Pradeep

    2012-01-01

    Patellar dislocations occurring about the vertical and horizontal axis are rare and irreducible. The neglected patellar dislocation is still rarer. We describe the clinical presentation and management of a case of neglected vertical patellar dislocation in a 6 year-old boy who sustained an external rotational strain with a laterally directed force to his knee. Initially the diagnosis was missed and 2 months later open reduction was done. The increased tension generated by the rotation of the lateral extensor retinaculum kept the patella locked in the lateral gutter even with the knee in full extension. Traumatic patellar dislocation with rotation around a vertical axis has been described earlier, but no such neglected case has been reported to the best of our knowledge. PMID:23162154

  1. Neglected locked vertical patellar dislocation

    Directory of Open Access Journals (Sweden)

    Rakesh Kumar Gupta

    2012-01-01

    Full Text Available Patellar dislocations occurring about the vertical and horizontal axis are rare and irreducible. The neglected patellar dislocation is still rarer. We describe the clinical presentation and management of a case of neglected vertical patellar dislocation in a 6 year-old boy who sustained an external rotational strain with a laterally directed force to his knee. Initially the diagnosis was missed and 2 months later open reduction was done. The increased tension generated by the rotation of the lateral extensor retinaculum kept the patella locked in the lateral gutter even with the knee in full extension. Traumatic patellar dislocation with rotation around a vertical axis has been described earlier, but no such neglected case has been reported to the best of our knowledge.

  2. Building a progressive vertical integration

    International Nuclear Information System (INIS)

    Charette, D.

    2008-01-01

    AAER Inc. is a Quebec-based company that manufactures turbines using proven European designs. This presentation discussed the company's business model. The company places an emphasis on identifying strategic and key components currently available for its turbines. Market analyses are performed in order to determine ideal suppliers and define business strategies and needs. The company invests in long-term relationships with its suppliers. Business partners for AAER are of a similar size and have a mutual understanding and respect for the company's business practices. Long-term agreements with suppliers are signed in order to ensure reliability and control over costs. Progressive vertical integration has been achieved by progressively manufacturing key components and integrating a North American supply chain. The company's secure supply chain and progressive vertical integration has significantly reduced financial costs and provided better quality control. It was concluded that vertical integration has also allowed AAER to provide better customer service and reduce transportation costs. tabs., figs

  3. Hybrid Vertical-Cavity Laser

    DEFF Research Database (Denmark)

    2010-01-01

    The present invention provides a light source (2) for light circuits on a silicon platform (3). A vertical laser cavity is formed by a gain region (101) arranged between a top mirror (4) and a bottom grating-mirror (12) in a grating region (11) in a silicon layer (10) on a substrate. A waveguide...... (18, 19) for receiving light from the grating region (11) is formed within or to be connected to the grating region, and functions as an 5 output coupler for the VCL. Thereby, vertical lasing modes (16) are coupled to lateral in-plane modes (17, 20) of the in-plane waveguide formed in the silicon...

  4. Experimental determination of self-heating and self-ignition risks associated with the dusts of agricultural materials commonly stored in silos.

    Science.gov (United States)

    Ramírez, Alvaro; García-Torrent, Javier; Tascón, Alberto

    2010-03-15

    Agricultural products stored in silos, and their dusts, can undergo oxidation and self-heating, increasing the risk of self-ignition and therefore of fires and explosions. The aim of the present work was to determine the thermal susceptibility (as reflected by the Maciejasz index, the temperature of the emission of flammable volatile substances and the combined information provided by the apparent activation energy and the oxidation temperature) of icing sugar, bread-making flour, maize, wheat, barley, alfalfa, and soybean dusts, using experimental methods for the characterisation of different types of coal (no standardised procedure exists for characterising the thermal susceptibility of either coal or agricultural products). In addition, the thermal stability of wheat, i.e., the risk of self-ignition determined as a function of sample volume, ignition temperature and storage time, was determined using the methods outlined in standard EN 15188:2007. The advantages and drawbacks of the different methods used are discussed. (c) 2009 Elsevier B.V. All rights reserved.

  5. SECADOR VERTICAL SOLAR PARA AMÊNDOAS DE CACAU

    Directory of Open Access Journals (Sweden)

    Everton Costa Santos

    2014-12-01

    Full Text Available Este artigo apresenta a simulação de um secador vertical solar e sua eficiência em relação ao método tradicional. Usando um programa computacional é obtida a geometria, efeitos térmicos e mecânicos. Depois é feita uma simulação para a transferência de calor via condução, convecção e radiação. Para teste de confiabilidade fazemos uma comparação dos nossos resultados com os dados simulados nas barcaças.

  6. Vertical reactor coolant pump instabilities

    International Nuclear Information System (INIS)

    Jones, R.M.

    1985-01-01

    The investigation conducted at the Tennessee Valley Authority's Sequoyah Nuclear Power Plant to determine and correct increasing vibrations in the vertical reactor coolant pumps is described. Diagnostic procedures to determine the vibration causes and evaluate the corractive measures taken are also described

  7. Synthesis, Crystal Structure and Luminescent Property of Cd (II Complex with <em>N-Benzenesulphonyl-L>-leucine

    Directory of Open Access Journals (Sweden)

    Xishi Tai

    2012-09-01

    Full Text Available A new trinuclear Cd (II complex [Cd3(L6(2,2-bipyridine3] [L =<em> Nem>-phenylsulfonyl-L>-leucinato] has been synthesized and characterized by elemental analysis, IR and X-ray single crystal diffraction analysis. The results show that the complex belongs to the orthorhombic, space group<em> Pem>212121 with<em> aem> = 16.877(3 Å, <em>b> em>= 22.875(5 Å, <em>c em>= 29.495(6 Å, <em>α> em>= <emem>= <emem>= 90°, <em>V> em>= 11387(4 Å3, <em>Z> em>= 4, <em>Dc>= 1.416 μg·m−3, <emem>= 0.737 mm−1, <em>F> em>(000 = 4992, and final <em>R>1 = 0.0390, <em>ωR>2 = 0.0989. The complex comprises two seven-coordinated Cd (II atoms, with a N2O5 distorted pengonal bipyramidal coordination environment and a six-coordinated Cd (II atom, with a N2O4 distorted octahedral coordination environment. The molecules form one dimensional chain structure by the interaction of bridged carboxylato groups, hydrogen bonds and p-p interaction of 2,2-bipyridine. The luminescent properties of the Cd (II complex and <em>N-Benzenesulphonyl-L>-leucine in solid and in CH3OH solution also have been investigated.

  8. Coexistence of Strategic Vertical Separation and Integration

    DEFF Research Database (Denmark)

    Jansen, Jos

    2003-01-01

    This paper gives conditions under which vertical separation is chosen by some upstream firms, while vertical integration is chosen by others in the equilibrium of a symmetric model. A vertically separating firm trades off fixed contracting costs against the strategic benefit of writing a (two......-part tariff, exclusive dealing) contract with its retailer. Coexistence emerges when more than two vertical Cournot oligopolists supply close substitutes. When vertical integration and separation coexist, welfare could be improved by reducing the number of vertically separating firms. The scope...

  9. Vertical and lateral heterogeneous integration

    Science.gov (United States)

    Geske, Jon; Okuno, Yae L.; Bowers, John E.; Jayaraman, Vijay

    2001-09-01

    A technique for achieving large-scale monolithic integration of lattice-mismatched materials in the vertical direction and the lateral integration of dissimilar lattice-matched structures has been developed. The technique uses a single nonplanar direct-wafer-bond step to transform vertically integrated epitaxial structures into lateral epitaxial variation across the surface of a wafer. Nonplanar wafer bonding is demonstrated by integrating four different unstrained multi-quantum-well active regions lattice matched to InP on a GaAs wafer surface. Microscopy is used to verify the quality of the bonded interface, and photoluminescence is used to verify that the bonding process does not degrade the optical quality of the laterally integrated wells. The authors propose this technique as a means to achieve greater levels of wafer-scale integration in optical, electrical, and micromechanical devices.

  10. Kinematic Fitting of Detached Vertices

    Energy Technology Data Exchange (ETDEWEB)

    Mattione, Paul [Rice Univ., Houston, TX (United States)

    2007-05-01

    The eg3 experiment at the Jefferson Lab CLAS detector aims to determine the existence of the $\\Xi_{5}$ pentaquarks and investigate the excited $\\Xi$ states. Specifically, the exotic $\\Xi_{5}^{--}$ pentaquark will be sought by first reconstructing the $\\Xi^{-}$ particle through its weak decays, $\\Xi^{-}\\to\\pi^{-}\\Lambda$ and $\\Lambda\\to\\pi^{-}$. A kinematic fitting routine was developed to reconstruct the detached vertices of these decays, where confidence level cuts on the fits are used to remove background events. Prior to fitting these decays, the exclusive reaction $\\gamma D\\rightarrow pp\\pi^{-}$ was studied in order to correct the track measurements and covariance matrices of the charged particles. The $\\Lambda\\rightarrow p\\pi^{-}$ and $\\Xi^{-}\\to\\pi^{-}\\Lambda$ decays were then investigated to demonstrate that the kinematic fitting routine reconstructs the decaying particles and their detached vertices correctly.

  11. Interference Lithography for Vertical Photovoltaics

    Science.gov (United States)

    Balls, Amy; Pei, Lei; Kvavle, Joshua; Sieler, Andrew; Schultz, Stephen; Linford, Matthew; Vanfleet, Richard; Davis, Robert

    2009-10-01

    We are exploring low cost approaches for fabricating three dimensional nanoscale structures. These vertical structures could significantly improve the efficiency of devices made from low cost photovoltaic materials. The nanoscale vertical structure provides a way to increase optical absorption in thin photovoltaic films without increasing the electronic carrier separation distance. The target structure is a high temperature transparent template with a dense array of holes on a 400 - 600 nm pitch fabricated by a combination of interference lithography and nanoembossing. First a master was fabricated using ultraviolet light interference lithography and the pattern was transferred into a silicon wafer master by silicon reactive ion etching. Embossing studies were performed with the master on several high temperature polymers.

  12. Vertically Integrated Circuits at Fermilab

    International Nuclear Information System (INIS)

    Deptuch, Grzegorz; Demarteau, Marcel; Hoff, James; Lipton, Ronald; Shenai, Alpana; Trimpl, Marcel; Yarema, Raymond; Zimmerman, Tom

    2009-01-01

    The exploration of the vertically integrated circuits, also commonly known as 3D-IC technology, for applications in radiation detection started at Fermilab in 2006. This paper examines the opportunities that vertical integration offers by looking at various 3D designs that have been completed by Fermilab. The emphasis is on opportunities that are presented by through silicon vias (TSV), wafer and circuit thinning and finally fusion bonding techniques to replace conventional bump bonding. Early work by Fermilab has led to an international consortium for the development of 3D-IC circuits for High Energy Physics. The consortium has submitted over 25 different designs for the Fermilab organized MPW run organized for the first time.

  13. Vertical Launch System Loadout Planner

    Science.gov (United States)

    2015-03-01

    United States Navy USS United States’ Ship VBA Visual Basic for Applications VLP VLS Loadout Planner VLS Vertical Launch System...with 32 gigabytes of random access memory and eight processors, General Algebraic Modeling System (GAMS) CPLEX version 24 (GAMS, 2015) solves this...problem in ten minutes to an integer tolerance of 10%. The GAMS interpreter and CPLEX solver require 75 Megabytes of random access memory for this

  14. NASA-Ames vertical gun

    Science.gov (United States)

    Schultz, P. H.

    1984-01-01

    A national facility, the NASA-Ames vertical gun range (AVGR) has an excellent reputation for revealing fundamental aspects of impact cratering that provide important constraints for planetary processes. The current logistics in accessing the AVGR, some of the past and ongoing experimental programs and their relevance, and the future role of this facility in planetary studies are reviewed. Publications resulting from experiments with the gun (1979 to 1984) are listed as well as the researchers and subjects studied.

  15. Strategic Inventories in Vertical Contracts

    OpenAIRE

    Krishnan Anand; Ravi Anupindi; Yehuda Bassok

    2008-01-01

    Classical reasons for carrying inventory include fixed (nonlinear) production or procurement costs, lead times, nonstationary or uncertain supply/demand, and capacity constraints. The last decade has seen active research in supply chain coordination focusing on the role of incentive contracts to achieve first-best levels of inventory. An extensive literature in industrial organization that studies incentives for vertical controls largely ignores the effect of inventories. Does the ability to ...

  16. DG Connect Funded Projects on Information and Communication Technologies (ICT) for Old Age People: Beyond Silos, CareWell and SmartCare.

    Science.gov (United States)

    Keijser, W; de Manuel-Keenoy, E; d'Angelantonio, M; Stafylas, P; Hobson, P; Apuzzo, G; Hurtado, M; Oates, J; Bousquet, J; Senn, A

    2016-01-01

    Information and communication technologies (ICT) are promising for the long-term care of older and frequently frail people. These innovations can improve health outcomes, quality of life and efficiency of care processes, while supporting independent living. However, they may be disruptive innovations. As all European member states are facing an increasing complexity of health and social care, good practices in ICT should be identified and evaluated. Three projects funded by DG CNECT are related to Active and Healthy Ageing (AHA) and frailty: (i) BeyondSilos, dealing with independent living and integrated services, (ii) CareWell, providing integrated care coordination, patient empowerment and home support and (iii) SmartCare, proposing a common set of standard functional specifications for an ICT platform enabling the delivery of integrated care to older patients. The three projects described in this paper provide a unique pan-European research field to further study implementation efforts and outcomes of new technologies. Below, based on a description of the projects, the authors display four domains that are in their views fundamental for in-depth exploration of heterogeneity in the European context: 1. Definition of easily transferable, high level pathways with solid evidence-base; 2. Change management in implementing ICT enabled integrated care; 3. Evaluation and data collection methodologies based on existing experience with MAST and MEDAL methodologies; and 4. Construction of new models for delivery of health and social care. Understanding complementarity, synergies and differences between the three unique projects can help to identify a more effective roll out of best practices within a varying European context.

  17. [Vertical fractures: apropos of 2 clinical cases].

    Science.gov (United States)

    Félix Mañes Ferrer, J; Micò Muñoz, P; Sánchez Cortés, J L; Paricio Martín, J J; Miñana Laliga, R

    1991-01-01

    The aim of the study is to present a clinical review of the vertical root fractures. Two clinical cases are presented to demonstrates the criteria for obtaining a correct diagnosis of vertical root fractures.

  18. Vertical melting of a stack of membranes

    Science.gov (United States)

    Borelli, M. E. S.; Kleinert, H.; Schakel, A. M. J.

    2001-02-01

    A stack of tensionless membranes with nonlinear curvature energy and vertical harmonic interaction is studied. At low temperatures, the system forms a lamellar phase. At a critical temperature, the stack disorders vertically in a melting-like transition.

  19. VERTICAL ACTIVITY ESTIMATION USING 2D RADAR

    African Journals Online (AJOL)

    hennie

    estimates on aircraft vertical behaviour from a single 2D radar track. ... Fortunately, the problem of detecting relative vertical motion using a single 2D ..... awareness tools in scenarios where aerial activity sensing is typically limited to 2D.

  20. Vertical structures in vibrated wormlike micellar solutions

    Science.gov (United States)

    Epstein, Tamir; Deegan, Robert

    2008-11-01

    Vertically vibrated shear thickening particulate suspensions can support a free-standing interfaces oriented parallel to gravity. We find that shear thickening worm-like micellar solutions also support such vertical interfaces. Above a threshold in acceleration, the solution spontaneously accumulates into a labyrinthine pattern characterized by a well-defined vertical edge. The formation of vertical structures is of interest because they are unique to shear-thickening fluids, and they indicate the existence of an unknown stress bearing mechanism.

  1. Vertical sounding balloons for stratospheric photochemistry

    Science.gov (United States)

    Pommereau, J. P.

    The use of vertical sounding balloons for stratospheric photochemistry studies is illustrated by the use of a vertical piloted gas balloon for the search of NO2 diurnal variations. It is shown that the use of montgolfieres (hot air balloons) can enhance the vertical sounding technique. Particular attention is given to a sun-heated montgolfiere and to the more sophisticated infrared montgolfiere that is able to perform three to four vertical excursions per day and to remain aloft for weeks or months.

  2. Determinations of vertical stroke V{sub cb} vertical stroke and vertical stroke V{sub ub} vertical stroke from baryonic Λ{sub b} decays

    Energy Technology Data Exchange (ETDEWEB)

    Hsiao, Y.K. [Shanxi Normal University, School of Physics and Information Engineering, Linfen (China); National Tsing Hua University, Department of Physics, Hsinchu (China); Geng, C.Q. [Shanxi Normal University, School of Physics and Information Engineering, Linfen (China); National Tsing Hua University, Department of Physics, Hsinchu (China); Hunan Normal University, Synergetic Innovation Center for Quantum Effects and Applications (SICQEA), Changsha (China)

    2017-10-15

    We present the first attempt to extract vertical stroke V{sub cb} vertical stroke from the Λ{sub b} → Λ{sub c}{sup +}l anti ν{sub l} decay without relying on vertical stroke V{sub ub} vertical stroke inputs from the B meson decays. Meanwhile, the hadronic Λ{sub b} → Λ{sub c}M{sub (c)} decays with M = (π{sup -},K{sup -}) and M{sub c} =(D{sup -},D{sup -}{sub s}) measured with high precisions are involved in the extraction. Explicitly, we find that vertical stroke V{sub cb} vertical stroke =(44.6 ± 3.2) x 10{sup -3}, agreeing with the value of (42.11 ± 0.74) x 10{sup -3} from the inclusive B → X{sub c}l anti ν{sub l} decays. Furthermore, based on the most recent ratio of vertical stroke V{sub ub} vertical stroke / vertical stroke V{sub cb} vertical stroke from the exclusive modes, we obtain vertical stroke V{sub ub} vertical stroke = (4.3 ± 0.4) x 10{sup -3}, which is close to the value of (4.49 ± 0.24) x 10{sup -3} from the inclusive B → X{sub u}l anti ν{sub l} decays. We conclude that our determinations of vertical stroke V{sub cb} vertical stroke and vertical stroke V{sub ub} vertical stroke favor the corresponding inclusive extractions in the B decays. (orig.)

  3. Metal Oxide Vertical Graphene Hybrid Supercapacitors

    Science.gov (United States)

    Meyyappan, Meyya (Inventor)

    2018-01-01

    A metal oxide vertical graphene hybrid supercapacitor is provided. The supercapacitor includes a pair of collectors facing each other, and vertical graphene electrode material grown directly on each of the pair of collectors without catalyst or binders. A separator may separate the vertical graphene electrode materials.

  4. Influência da alteração da dimensão vertical de oclusão na postura da cabeça e da coluna cervical, em voluntários edêntulos portadores de disfunção temporomandibular, tratados com aparelhos oclusais planos

    OpenAIRE

    João Paulo dos Santos Fernandes

    2012-01-01

    Resumo: O objetivo neste trabalho foi analisar a influência da dimensão vertical de oclusão na postura da coluna cervical e da cabeça por meio de aferições de medidas angulares craniocervicais. Foram selecionados 17 voluntários desdentados totais, com sinais clínicos de diminuição de dimensão vertical de oclusão, portadores de sinais e sintomas de disfunção temporomandibular e usuários de próteses totais, inscritos no cadastro de pacientes do CETASE (Centro de Estudos e Tratamento das Alteraç...

  5. Crystalline beams: The vertical zigzag

    International Nuclear Information System (INIS)

    Haffmans, A.F.; Maletic, D.; Ruggiero, A.G.

    1994-01-01

    This note is the continuation of our comprehensive investigation of Crystalline Beams. After having determined the equations of motion and the conditions for the formation of the simplest configuration, i.e. the string, we study the possibility of storing an intense beam of charged particles in a storage ring where they form a vertical zigzag. We define the equilibrium configuration, and examine the confinement conditions. Subsequently, we derive the transfer matrix for motion through various elements of the storage ring. Finally we investigate the stability conditions for such a beam

  6. Vertices in the abelized picture

    International Nuclear Information System (INIS)

    Embacher, F.

    1990-01-01

    Covariant vertices of open bosonic string theory are transformed to the abelized picture. The way the pure transverse (light-cone gauge) vertex is contained therein is exhibited explicitly. The formalism shows in a quite transparent way that all further content of a covariant vertex is of gauge type. By applying the transverse projection operator in the abelized picture, an algebraic condition whether a set of Neumann coefficients define a vertex for string theory is obtained. A speculation concerning field redefinitions in string field theory is added. (Author) 33 refs

  7. Determination of the quark coupling strength vertical bar V-ub vertical bar using baryonic decays

    NARCIS (Netherlands)

    Aaij, R.; Adeva, B.; Adinolfi, M.; Older, A. A.; Ajaltouni, Z.; Akar, S.; Albrecht, J.; Alessio, F.; Alexander, M.; Ali, S.; Alkhazov, G.; Cartelle, P. Alvarez; Alves, A. A.; Amato, S.; Amerio, S.; Amhis, Y.; An, L.; Anderlini, L.; Andreotti, M.; Andrews, J. E.; Appleby, R. B.; Gutierrez, O. Aquines; Archilli, F.; Artamonov, A.; Artuso, M.; Aslanides, E.; Auriemma, G.; Baalouch, M.; Bachmann, S.; Back, J. J.; Badalov, A.; Baesso, C.; Baldini, W.; Barlow, R. J.; Barschel, C.; Barsuk, S.; Barter, W.; Batozskaya, V.; Battista, V.; Beaucourt, L.; Beddow, J.; Bedeschi, F.; Bediaga, I.; Bel, L. J.; Belyaev, I.; Ben-Haim, E.; Bencivenni, G.; Onderwater, C. J. G.; Pellegrino, A.; Tolk, S.

    In the Standard Model of particle physics, the strength of the couplings of the b quark to the u and c quarks, vertical bar V-ub vertical bar and vertical bar V-ub vertical bar, are governed by the coupling of the quarks to the Higgs boson. Using data from the LHCb experiment at the Large Hadron

  8. Neonatal Phosphate Nutrition Alters <em>in em>Vivo> and <em>in em>Vitro> Satellite Cell Activity in Pigs

    Directory of Open Access Journals (Sweden)

    Chad H. Stahl

    2012-05-01

    Full Text Available Satellite cell activity is necessary for postnatal skeletal muscle growth. Severe phosphate (PO4 deficiency can alter satellite cell activity, however the role of neonatal PO4 nutrition on satellite cell biology remains obscure. Twenty-one piglets (1 day of age, 1.8 ± 0.2 kg BW were pair-fed liquid diets that were either PO4 adequate (0.9% total P, supra-adequate (1.2% total P in PO4 requirement or deficient (0.7% total P in PO4 content for 12 days. Body weight was recorded daily and blood samples collected every 6 days. At day 12, pigs were orally dosed with BrdU and 12 h later, satellite cells were isolated. Satellite cells were also cultured <em>in vitroem> for 7 days to determine if PO4 nutrition alters their ability to proceed through their myogenic lineage. Dietary PO4 deficiency resulted in reduced (<em>P> < 0.05 sera PO4 and parathyroid hormone (PTH concentrations, while supra-adequate dietary PO4 improved (<em>P> < 0.05 feed conversion efficiency as compared to the PO4 adequate group. <em>In vivoem> satellite cell proliferation was reduced (<em>P> < 0.05 among the PO4 deficient pigs, and these cells had altered <em>in vitroem> expression of markers of myogenic progression. Further work to better understand early nutritional programming of satellite cells and the potential benefits of emphasizing early PO4 nutrition for future lean growth potential is warranted.

  9. Vertically stacked nanocellulose tactile sensor.

    Science.gov (United States)

    Jung, Minhyun; Kim, Kyungkwan; Kim, Bumjin; Lee, Kwang-Jae; Kang, Jae-Wook; Jeon, Sanghun

    2017-11-16

    Paper-based electronic devices are attracting considerable attention, because the paper platform has unique attributes such as flexibility and eco-friendliness. Here we report on what is claimed to be the firstly fully integrated vertically-stacked nanocellulose-based tactile sensor, which is capable of simultaneously sensing temperature and pressure. The pressure and temperature sensors are operated using different principles and are stacked vertically, thereby minimizing the interference effect. For the pressure sensor, which utilizes the piezoresistance principle under pressure, the conducting electrode was inkjet printed on the TEMPO-oxidized-nanocellulose patterned with micro-sized pyramids, and the counter electrode was placed on the nanocellulose film. The pressure sensor has a high sensitivity over a wide range (500 Pa-3 kPa) and a high durability of 10 4 loading/unloading cycles. The temperature sensor combines various materials such as poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS), silver nanoparticles (AgNPs) and carbon nanotubes (CNTs) to form a thermocouple on the upper nanocellulose layer. The thermoelectric-based temperature sensors generate a thermoelectric voltage output of 1.7 mV for a temperature difference of 125 K. Our 5 × 5 tactile sensor arrays show a fast response, negligible interference, and durable sensing performance.

  10. Averiguação do potencial de vento em ambiente edificado para aproveitamentos

    OpenAIRE

    Magalhães, Nuno Filipe da Costa

    2011-01-01

    O objectivo deste projecto consiste em analisar o potencial eólico em ambiente edificado urbano, considerando a utilização de turbinas eólicas de eixo vertical para produção de energia nesse contexto. Pretende-se com este documento demonstrar que, embora os estudos sobre as turbinas de eixo vertical sejam ainda reduzidos quando comparados aos das de eixo horizontal, tal não implica que as mesmas não tenham características que, em determinados cenários, sejam superiores às turbinas de eixo hor...

  11. Achievement of 900kgf/cm[sup 2] super workable high strength concrete with belite Portland cement (elevator building of cement silo in Chichibu cement). 2. ; Application to the actual structure. Ko belite kei cement de 900kgf/cm[sup 2] wo tassei (Chichibu cement cement silo no elevator to). 2. ; Jitsukozobutsu eno tekiyo

    Energy Technology Data Exchange (ETDEWEB)

    Yoda, K.; Sakuramoto, F. (Kajima Corp., Tokyo (Japan))

    1993-08-01

    For the purpose of rationalization of concrete works, the super workable high strength concrete was applied to the underground part of elevator building of cement silo in the Kumagaya Works, Chichibu Cement, and was successfully put into practice. Quality control values of the super workable high strength concrete were 65[plus minus]5cm in the slump flow and 900kgf/cm[sup 2] in the compressive strength at the age of 28 days. Addition of the admixture was 1.25% of the unit cement amount. Based on the linear correlation between the slump flow and mixer load immediately before discharge, the slump flow was controlled by the mixer load. Property of the fresh concrete, fluidity, compacting property, material segregation resistance property, and strength property were examined by using a sidewall test model. For all tests, satisfactory properties were obtained. Subsequently, the actual structure was successfully constructed. As a result, laborsaving and improvement of productivity were confirmed for the super workable high strength concrete work. 3 refs., 8 figs., 4 tabs.

  12. Constituents from <em>Vigna em>vexillata> and Their Anti-Inflammatory Activity

    Directory of Open Access Journals (Sweden)

    Guo-Feng Chen

    2012-08-01

    Full Text Available The seeds of <em>Vigna em>genus are important food resources and there have already been many reports regarding their bioactivities. In our preliminary bioassay, the chloroform layer of methanol extracts of<em> V. vexillata em>demonstrated significant anti-inflammatory bioactivity. Therefore, the present research is aimed to purify and identify the anti-inflammatory principles of <em>V. vexillataem>. One new sterol (1 and two new isoflavones (2,3 were reported from the natural sources for the first time and their chemical structures were determined by the spectroscopic and mass spectrometric analyses. In addition, 37 known compounds were identified by comparison of their physical and spectroscopic data with those reported in the literature. Among the isolates, daidzein (23, abscisic acid (25, and quercetin (40 displayed the most significant inhibition of superoxide anion generation and elastase release.

  13. Stakeholder participation for the legacy ponds and legacy silos (LP and LS) facility at Sellafield, Cumbria. UK: the nature and effectiveness of the dialogue - 16030

    International Nuclear Information System (INIS)

    Whitton, John

    2009-01-01

    The Legacy Ponds and Silos (LP and S) facilities are part of the UK nuclear legacy located at the Sellafield Site, Cumbria. There are four individual facilities containing nuclear wastes that have accumulated over a period of approximately 50 years. Waste retrieval and conditioning, in preparation for decommissioning, is currently being carried out by the site operator. LP and S have recently proposed a re-engagement with stakeholders following the initial engagement in December 2005. This paper reviews this earlier engagement in terms of the nature of dialogue that was carried out when compared against definitions of deliberation provided in the literature. The aim of this paper is to provide those planning future engagement with a better understanding of how the nature of dialogue can vary and uses participation and deliberation as indicators of effective engagement. A concern of those working towards a programme of effective stakeholder participation in 2005 was how to ensure genuine dialogue and stakeholder representation in such a strictly controlled and regulated environment with a technical complexity that challenges technical specialist and lay person alike. LP and S recognised that effective dialogue with stakeholders on the available technical options and their associated societal impacts would form a significant part of this process if options were to prove resilient. However, the challenge presented to LP and S was how to engage stakeholders on a variety of projects, whilst ensuring the output could be used by the projects as part of their technical decision making. Initial contact was made with stakeholders in December 2005, as part of a 'Baseline' Best Practicable Environmental Option (BPEO) study. A BPEO study leads to decisions on waste management based on an integrated assessment of alternative options, on the basis of factors such as the occupational and environmental risks, the environmental impacts, costs and social implications of the options

  14. Comparação entre o efeito do aumento da dimensão vertical de oclusão e do avanço mandibular na qualidade do sono em pacientes idosos portadores de próteses totais bimaxilares

    OpenAIRE

    Thiago Carôso Fróes

    2011-01-01

    A população idosa possui alta prevalência de edentulismo e, conseqüentemente, é afetada pelos problemas a ele associados. A perda da dimensão vertical de oclusão (DVO) é um destes problemas que compromete, entre outros fatores, o desempenho do sistema estomatognático. Logo, doenças relacionadas ao colapso da musculatura da via aérea superior (VAS), como a síndrome da apnéia obstrutiva do sono (SAOS), tornam-se enfermidades relevantes para pacientes nesta faixa etária. Sendo assim, medidas ter...

  15. Capillary holdup between vertical spheres

    Directory of Open Access Journals (Sweden)

    S. Zeinali Heris

    2009-12-01

    Full Text Available The maximum volume of liquid bridge left between two vertically mounted spherical particles has been theoretically determined and experimentally measured. As the gravitational effect has not been neglected in the theoretical model, the liquid interface profile is nonsymmetrical around the X-axis. Symmetry in the interface profile only occurs when either the particle size ratio or the gravitational force becomes zero. In this paper, some equations are derived as a function of the spheres' sizes, gap width, liquid density, surface tension and body force (gravity/centrifugal to estimate the maximum amount of liquid that can be held between the two solid spheres. Then a comparison is made between the result based on these equations and several experimental results.

  16. Contabilidad, información y control en un contexto de actividades económicas diversificadas en la edad moderna: el Monasterio de Silos y su sofisticado sistema contable

    Directory of Open Access Journals (Sweden)

    Lorenzo Maté Sadornil

    2008-12-01

    Full Text Available El artículo permite observar el complejo sistema contable utilizado por los monjes benedictinos del Monasterio de Silos (Burgos, España durante la Edad Moderna, así como mostrar su utilidad para el registro y control de las variadas actividades económicas que de forma eficiente llevó a cabo. La riqueza documental del Archivo del Monasterio de Silos, en cuanto a Libros de Cuentas se refiere, ha permitido el análisis, cuantificación e interpretación de dicha actividad. Se obtienen resultados globales acerca de la importancia absoluta y relativa del conjunto de aportaciones que contribuyeron al desarrollo económico del Monasterio y su entorno desde finales del siglo XVII hasta principios del XIX. El trabajo incluye el desglose de los diferentes tipos de ingresos existentes, tanto los procedentes de la administración y gestión económica de los bienes propiedad del Monasterio: rentas de los censos, rentas de las tierras cedidas en explotación y productos de tierras y ganados obtenidos mediante la explotación directa, como los procedentes de su condición eclesiástica y actividad religiosa: diezmos, sacristía y extraordinarios. Igualmente, se analizan las aplicaciones a las que fueron destinados los flujos financieros procedentes de los ingresos y se vierte la síntesis de los resultados obtenidos.

  17. Momentos em freios e em embraiagens

    OpenAIRE

    Mimoso, Rui Miguel Pereira

    2011-01-01

    Dissertação para obtenção do Grau de Mestre em Mestrado Integrado em Engenharia Mecânica Nesta dissertação reúnem-se os modelos de cálculo utilizados na determinação dos momentos em freios e em embraiagens. Neste trabalho consideram-se os casos de freios e embraiagens de atrito seco e atrito viscoso. Nos freios de atrito viscoso são considerados casos em que as características dos fluidos não são induzidas, e outros em que são induzidas modificações a essas mesmas características. São a...

  18. Análisis de la distribución de presiones estáticas en silos cilíndricos con tolva excéntrica mediante el M. E. F. Influencia de la excentricidad y comparación con el Eurocódigo 1

    Directory of Open Access Journals (Sweden)

    Vidal López, Pablo

    2001-04-01

    Full Text Available At the European level, silos are considered under the European Standards (Eurocode 1, Part 4. Actions in si/os and tanks, with no proposed method of calculation in the case of an eccentric outlet. The guidelines include a brief mention that eccentricity should not exceed 25% of the silo diameter and that in the future, attempts will be made to cover large eccentricities. We have developed an analysis of static pressure distributions in grain silos with eccentric outlets. To this end, silos were modelled using ANSYS 5.5. According to the F.E.M. maximum normal pressures on the silo wall correspond to the si/o-hopper junction. on the opposite side to the displacement of the outlet for any eccentricity, increasing at this point as hopper eccentricity rises. Compared to the Eurocode, static pressures are proposed when the hopper is centered and considered to be valid up to an eccentricity limit of 0.25 times the diameter , their redistribution at the hopper wall when this is eccentric may be observed by means of the FE.M. increasing on the opposite side to the outlet and decreasing on the same side with respect to the central hopper. This leads us to conclude that a more conservative method of calculation should be used in the Eurocode for normal pressures on the hopper wall when centered, and coefficients drawn up to include the variations produced in the static state when it is off-center.En Europa las acciones en silos se recogen en la Norma Europea (ENV 1991-4. Eurocode l. Part 4: Actions on silos and tanks., sin proponer método alguno de cálculo cuando la boca de salida es excéntrica, limitándose a mencionar que la excentricidad de ésta no debe de ser mayor del 25% del diámetro y mencionando que en un futuro se intentará que cubra las grandes excentricidades. En este artículo realizamos un análisis de la distribución de presiones estáticas en silos cilíndricos con tolva excéntrica. Para ello hemos usado el programa ANSYS 5.5. con

  19. Dermatoses em renais cronicos em terapia dialitica

    Directory of Open Access Journals (Sweden)

    Luis Alberto Batista Peres

    2014-03-01

    Full Text Available Objetivo: As desordens cutâneas e das mucosas são comuns em pacientes em hemodiálise a longo prazo. A diálise prolonga a expectativa de vida, dando tempo para a manifestação destas anormalidades. Os objetivos deste estudo foram avaliar a prevalência de problemas dermatológicos em pacientes com doença renal crônica (DRC em hemodiálise. Métodos: Cento e quarenta e cinco pacientes com doença renal crônica em hemodiálise foram estudados. Todos os pacientes foram completamente analisados para as alterações cutâneas, de cabelos, mucosas e unhas por um único examinador e foram coletados dados de exames laboratoriais. Os dados foram armazenados em um banco de dados do Microsolft Excel e analisados por estatística descritiva. As variáveis contínuas foram comparadas pelo teste t de Student e as variáveis categóricas utilizando o teste do qui-quadrado ou o teste Exato de Fischer, conforme adequado. Resultados: O estudo incluiu 145 pacientes, com idade média de 53,6 ± 14,7 anos, predominantemente do sexo masculino (64,1% e caucasianos (90,0%. O tempo médio de diálise foi de 43,3 ± 42,3 meses. As principais doenças subjacentes foram: hipertensão arterial em 33,8%, diabetes mellitus em 29,6% e glomerulonefrite crônica em 13,1%. As principais manifestações dermatológicas observadas foram: xerose em 109 (75,2%, equimose em 87 (60,0%, prurido em 78 (53,8% e lentigo em 33 (22,8% pacientes. Conclusão: O nosso estudo mostrou a presença de mais do que uma dermatose por paciente. As alterações cutâneas são frequentes em pacientes em diálise. Mais estudos são necessários para melhor caracterização e manejo destas dermatoses.

  20. Vertical grid of retrieved atmospheric profiles

    International Nuclear Information System (INIS)

    Ceccherini, Simone; Carli, Bruno; Raspollini, Piera

    2016-01-01

    The choice of the vertical grid of atmospheric profiles retrieved from remote sensing observations is discussed considering the two cases of profiles used to represent the results of individual measurements and of profiles used for subsequent data fusion applications. An ozone measurement of the MIPAS instrument is used to assess, for different vertical grids, the quality of the retrieved profiles in terms of profile values, retrieval errors, vertical resolutions and number of degrees of freedom. In the case of individual retrievals no evident advantage is obtained with the use of a grid finer than the one with a reduced number of grid points, which are optimized according to the information content of the observations. Nevertheless, this instrument dependent vertical grid, which seems to extract all the available information, provides very poor results when used for data fusion applications. A loss of about a quarter of the degrees of freedom is observed when the data fusion is made using the instrument dependent vertical grid relative to the data fusion made using a vertical grid optimized for the data fusion product. This result is explained by the analysis of the eigenvalues of the Fisher information matrix and leads to the conclusion that different vertical grids must be adopted when data fusion is the expected application. - Highlights: • Data fusion application is taken into account for the choice of the vertical grid. • The study is performed using ozone profiles retrieved from MIPAS measurements. • A very fine vertical grid is not needed for the analysis of a single instrument. • The instrument dependent vertical grid is not the best choice for data fusion. • A data fusion dependent vertical grid must be used for profiles that will be fused.

  1. Vertical and horizontal access configurations

    International Nuclear Information System (INIS)

    Spampinato, P.T.

    1987-01-01

    A number of configuration features and maintenance operations are influenced by the choice of whether a design is based on vertical or horizontal access for replacing reactor components. The features which are impacted most include the first wall/blanket segmentation, the poloidal field coil locations, the toroidal field coil number and size, access port size for in-vessel components, and facilities. Since either configuration can be made to work, the choice between the two is not clear cut because both have certain advantages. It is apparent that there are large cost benefits in the poloidal field coil system for ideal coil locations for high elongation plasmas and marginal savings for the INTOR case. If we assume that a new tokamak design will require a higher plasma elongation, the recommendation is to arrange the poloidal field coils in a cost-effective manner while providing reasonable midplane access for heating interfaces and test modules. If a new design study is not based on a high elongation plasma, it still appears prudent to consider this approach so that in-vessel maintenance can be accomplished without moving very massive structures such as the bulk shield. 10 refs., 29 figs., 3 tabs

  2. The Ames Vertical Gun Range

    Science.gov (United States)

    Karcz, J. S.; Bowling, D.; Cornelison, C.; Parrish, A.; Perez, A.; Raiche, G.; Wiens, J.-P.

    2016-01-01

    The Ames Vertical Gun Range (AVGR) is a national facility for conducting laboratory- scale investigations of high-speed impact processes. It provides a set of light-gas, powder, and compressed gas guns capable of accelerating projectiles to speeds up to 7 km s(exp -1). The AVGR has a unique capability to vary the angle between the projectile-launch and gravity vectors between 0 and 90 deg. The target resides in a large chamber (diameter approximately 2.5 m) that can be held at vacuum or filled with an experiment-specific atmosphere. The chamber provides a number of viewing ports and feed-throughs for data, power, and fluids. Impacts are observed via high-speed digital cameras along with investigation-specific instrumentation, such as spectrometers. Use of the range is available via grant proposals through any Planetary Science Research Program element of the NASA Research Opportunities in Space and Earth Sciences (ROSES) calls. Exploratory experiments (one to two days) are additionally possible in order to develop a new proposal.

  3. Flooding Mechanism in Vertical Flow

    International Nuclear Information System (INIS)

    Ronny-Dwi Agussulistyo; Indarto

    2000-01-01

    This research was carried out to investigate the mechanism of flooding ina vertical liquid-gas counter current flow, along two meter length of thetube. The tube use both circular and square tube, a cross section of squaretube was made the same as a cross section of circular tube with one inchdiameter tube. The liquid enters the tube, passes through a porous wall inletand a groove inlet in a distributor and it flows downwards through a liquidoutlet in a collector. The gas is being introduced at the bottom of the tube,it flows upwards through nozzle in the collector. The results of researchshowed that the flooding occurs earlier in the circular tube than in thesquare tube, either uses a porous wall inlet or a groove inlet. In the squaretube , onset of the flooding occurs at the top of the tube, in front ofliquid injection, it is related to the formation of a film wave, just belowthe liquid feed. Whereas in the circular tube, onset of the flooding occursfrom the bottom of the tube, at the liquid outlet, it is related to theexpand of the film wave. However, in the circular tube with the groove inlet,for the higher liquid flow rate, onset of the flooding from the top, like inthe square tube. (author)

  4. Wind tower with vertical rotors

    Energy Technology Data Exchange (ETDEWEB)

    Dietz, A

    1978-08-03

    The invention concerns a wind tower with vertical rotors. A characteristic is that the useful output of the rotors is increased by the wind pressure, which is guided to the rotors at the central opening and over the whole height of the structure by duct slots in the inner cells. These duct slots start behind the front nose of the inner cell and lead via the transverse axis of the pillar at an angle into the space between the inner cells and the cell body. This measure appreciably increases the useful output of the rotors, as the rotors do not have to provide any displacement work from their output, but receive additional thrust. The wind pressure pressing from inside the rotor and accelerating from the outside produces a better outflow of the wind from the power plant pillar with only small tendency to turbulence, which appreciably improves the effect of the adjustable turbulence smoothers, which are situated below the rotors over the whole height.

  5. Vertical mixing by Langmuir circulations

    International Nuclear Information System (INIS)

    McWilliams, James C.; Sullivan, Peter P.

    2001-01-01

    Wind and surface wave frequently induce Langmuir circulations (LC) in the upper ocean, and the LC contribute to mixing materials down from the surface. In this paper we analyze large-eddy simulation (LES) cases based on surface-wave-averaged, dynamical equations and show that the effect of the LC is a great increase in the vertical mixing efficiency for both material properties and momentum. We provide new confirmation that the previously proposed K-profile parameterization (KPP) model accurately characterizes the turbulent transport in a weakly convective, wind-driven boundary layer with stable interior stratification. We also propose a modest generalization of KPP for the regime of weakly convective Langmuir turbulence. This makes the KPP turbulent flux profiles match those in the LES case with LC present fairly well, especially so for material properties being transported downwards from the ocean surface. However, some open issues remain about how well the present LES and KPP formulations represent Langmuir turbulence, in part because wave-breaking effects are not yet included. (Author)

  6. Influência do anel de contenção na evolução pós-operatória dos pacientes submetidos à gastroplastia vertical em "Y de roux para tratamento da obesidade mórbida

    OpenAIRE

    Silvia Zenobio Nascimento

    2012-01-01

    Introdução: A obesidade mórbida (OM) e as doenças a ela associadas tornaram-se grave problema de saúde pública. O tratamento cirúrgico da OM é considerado o método mais eficaz de perda sustentada do excesso de peso. A derivação gástrica em Y de Roux (GVYR) ou bypass gástrico é um dos procedimentos mais realizados no Brasil e no mundo. A utilização do anel de contenção associada a este procedimento tem o objetivo de retardar o esvaziamento gástrico, mantendo a sensação de saciedade mais pr...

  7. The green building envelope : Vertical greening

    NARCIS (Netherlands)

    Ottelé, M.

    2011-01-01

    Planting on roofs and façades is one of the most innovative and fastest developing fields of green technologies with respect to the built environment and horticulture. This thesis is focused on vertical greening of structures and to the multi-scale benefits of vegetation. Vertical green can improve

  8. Safety Aspects for Vertical Wall Breakwaters

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Burcharth, H. F.; Christiani, E.

    1996-01-01

    In this appendix some safety aspects in relation to vertical wall breakwaters are discussed. Breakwater structures such as vertical wall breakwaters are used under quite different conditions. The expected lifetime can be from 5 years (interim structure) to 100 years (permanent structure) and the ...

  9. Updated Vertical Extent of Collision Damage

    DEFF Research Database (Denmark)

    Tagg, R.; Bartzis, P.; Papanikolaou, P.

    2002-01-01

    The probabilistic distribution of the vertical extent of collision damage is an important and somewhat controversial component of the proposed IMO harmonized damage stability regulations for cargo and passenger ships. The only pre-existing vertical distribution, currently used in the international...

  10. Plasmon Modes of Vertically Aligned Superlattices

    DEFF Research Database (Denmark)

    Filonenko, Konstantin; Duggen, Lars; Willatzen, Morten

    2017-01-01

    By using the Finite Element Method we visualize the modes of vertically aligned superlattice composed of gold and dielectric nanocylinders and investigate the emitter-plasmon interaction in approximation of weak coupling. We find that truncated vertically aligned superlattice can function...

  11. The strategic value of partial vertical integration

    OpenAIRE

    Fiocco, Raffaele

    2014-01-01

    We investigate the strategic incentives for partial vertical integration, namely, partial ownership agreements between manufacturers and retailers, when retailers privately know their costs and engage in differentiated good price competition. The partial misalignment between the profit objectives within a partially integrated manufacturer-retailer hierarchy entails a higher retail price than under full integration. This `information vertical effect' translates into an opposite ...

  12. Vertical integration increases opportunities for patient flow.

    Science.gov (United States)

    Radoccia, R A; Benvenuto, J A; Blancett, L

    1991-08-01

    New sources of patients will become more and more important in the next decade as hospitals continue to feel the squeeze of a competitive marketplace. Vertical integration, a distribution tool used in other industries, will be a significant tool for health care administrators. In the following article, the authors explain the vertical integration model that shows promise for other institutions.

  13. Vertical integration from the large Hilbert space

    Science.gov (United States)

    Erler, Theodore; Konopka, Sebastian

    2017-12-01

    We develop an alternative description of the procedure of vertical integration based on the observation that amplitudes can be written in BRST exact form in the large Hilbert space. We relate this approach to the description of vertical integration given by Sen and Witten.

  14. Vertical Integration, Monopoly, and the First Amendment.

    Science.gov (United States)

    Brennan, Timothy J.

    This paper addresses the relationship between the First Amendment, monopoly of transmission media, and vertical integration of transmission and content provision. A survey of some of the incentives a profit-maximizing transmission monopolist may have with respect to content is followed by a discussion of how vertical integration affects those…

  15. Moving vertices to make drawings plane

    NARCIS (Netherlands)

    Goaoc, X.; Kratochvil, J.; Okamoto, Y.; Shin, C.S.; Wolff, A.; Hong, S.K.; Nishizeki, T.; Quan, W.

    2008-01-01

    In John Tantalo’s on-line game Planarity the player is given a non-plane straight-line drawing of a planar graph. The aim is to make the drawing plane as quickly as possible by moving vertices. In this paper we investigate the related problem MinMovedVertices which asks for the minimum number of

  16. EM International. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    1993-07-01

    It is the intent of EM International to describe the Office of Environmental Restoration and Waste Management`s (EM`s) various roles and responsibilities within the international community. Cooperative agreements and programs, descriptions of projects and technologies, and synopses of visits to international sites are all highlighted in this semiannual journal. Focus on EM programs in this issue is on international collaboration in vitrification projects. Technology highlights covers: in situ sealing for contaminated sites; and remote sensors for toxic pollutants. Section on profiles of countries includes: Arctic contamination by the former Soviet Union, and EM activities with Germany--cooperative arrangements.

  17. Effects of target location and uncertainty on reaching movements in standing position Los efectos de la ubicación de la diana y la incertidumbre en los movimientos de alcance en la posición vertical Efeitos da localização do alvo e da incerteza em movimentos de alcance na postura ereta

    Directory of Open Access Journals (Sweden)

    Luiz de França Bahia Loureiro Junior

    2012-09-01

    movimientos de alcance en la posición erecta.Os efeitos da localização do alvo e da incerteza quanto à posição do alvo em movimentos de alcance foram investigados. Dez adultos permaneceram emem frente a um monitor sensível ao toque. Eles foram instruídos a pressionar com o dedo indicador direito um interruptor e tocar o centro do alvo apresentado no monitor após ele acender, movendo o membro superior rapidamente. O alvo foi mostrado ipsi ou contralateralmente e os participantes tinham ou não certeza sobre a posição do alvo. O tempo de reação (TR e movimento (TM e o erro radial (ER foram avaliados. Os resultados revelaram menor TR (≈35 ms e ER (≈0,19 cm para a condição de certeza e maiores TR (≈8 ms e TM (≈18 ms para os moimentos ao alvo contralateral. Concluindo, esses achados mostraram que os efeitos da incerteza da localização e a posição final do alvo podem ser aplicados para movimentos de alcance na posição ereta.

  18. COMPUTING VERTICES OF INTEGER PARTITION POLYTOPES

    Directory of Open Access Journals (Sweden)

    A. S. Vroublevski

    2015-01-01

    Full Text Available The paper describes a method of generating vertices of the polytopes of integer partitions that was used by the authors to calculate all vertices and support vertices of the partition polytopes for all n ≤ 105 and all knapsack partitions of n ≤ 165. The method avoids generating all partitions of n. The vertices are determined with the help of sufficient and necessary conditions; in the hard cases, the well-known program Polymake is used. Some computational aspects are exposed in more detail. These are the algorithm for checking the criterion that characterizes partitions that are convex combinations of two other partitions; the way of using two combinatorial operations that transform the known vertices to the new ones; and employing the Polymake to recognize a limited number (for small n of partitions that need three or more other partitions for being convexly expressed. We discuss the computational results on the numbers of vertices and support vertices of the partition polytopes and some appealing problems these results give rise to.

  19. Microsatellite Loci in the Gypsophyte <em>Lepidium subulatum em>(Brassicaceae, and Transferability to Other <em>Lepidieae>

    Directory of Open Access Journals (Sweden)

    José Gabriel Segarra-Moragues

    2012-09-01

    Full Text Available Polymorphic microsatellite markers were developed for the Ibero-North African, strict gypsophyte <em>Lepidium subulatumem> to unravel the effects of habitat fragmentation in levels of genetic diversity, genetic structure and gene flow among its populations. Using 454 pyrosequencing 12 microsatellite loci including di- and tri-nucleotide repeats were characterized in <em>L. subulatumem>. They amplified a total of 80 alleles (2–12 alleles per locus in a sample of 35 individuals of <em>L. subulatumem>, showing relatively high levels of genetic diversity, <em>H>O = 0.645, <em>H>E = 0.627. Cross-species transferability of all 12 loci was successful for the Iberian endemics <em>Lepidium cardaminesem>, <em>Lepidium stylatumem>, and the widespread, <em>Lepidium graminifoliumem> and one species each of two related genera, <em>Cardaria drabaem> and <em>Coronopus didymusem>. These microsatellite primers will be useful to investigate genetic diversity, population structure and to address conservation genetics in species of <em>Lepidium>.

  20. Análise de trilha da contaminação por aflatoxinas em grãos de milho armazenados

    Directory of Open Access Journals (Sweden)

    Adriana Sbardelotto Di Domenico

    2015-06-01

    Full Text Available O objetivo deste trabalho foi determinar a magnitude dos efeitos diretos e indiretos de parâmetros físico-químicos e microbiológicos sobre a ocorrência de aflatoxinas em grãos de milho armazenados, por meio da análise de trilha. Os dados foram coletados em dois experimentos: um cultivo de inverno (colheita do milho em julho de 2012 e um cultivo de verão (colheita em fevereiro de 2013. Os grãos foram armazenados por 12 meses, em dois tipos de acondicionamentos: em sacarias convencionais de polipropileno e a granel em silo metálico. Avaliaram-se 14 características dos grãos. Calculou-se a matriz de correlações de Pearson entre todos os parâmetros, realizou-se o diagnóstico de multicolinearidade e, posteriormente, aplicou-se a análise de trilha com regressão em crista. Observou-se forte influência das condições ambientais entre as safras de inverno e de verão, e entre época e tipo de armazenagem, nos coeficientes de análise de trilha. As variáveis teor de umidade, conteúdo de cinzas, proteínas, lipídios, grãos sem defeitos, massa volumétrica, incidência de Penicillium sp., Aspergillus sp. e Fusarium sp. devem ser consideradas conjuntamente na definição da possibilidade de ocorrência de aflatoxinas na massa de grãos armazenados.

  1. Decree no. 2005-78 from January 26, 2005, authorizing the Atomic Energy Commission to proceed to the definitive shutdown and dismantling operations of the nuclear facility no.20, named Siloe reactor, in the Grenoble city territory (Isere); Decret no. 2005-78 du 26 janvier 2005, autorisant le Commissariat a l'energie atomique a proceder aux operations de mise a l'arret definitif et de demantelement de l'installation nucleaire de base no.20 denommee reacteur Siloe sur le territoire de la commune de Grenoble (Isere)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-02-15

    On March 19, 2003, the French atomic energy commission (CEA) addressed an authorization demand for the definitive shutdown and dismantling of the Siloe reactor. After a technical and administrative instruction of this demand by the French nuclear safety authority (ASN), a project of decree has been presented on July 6, 2004 at the permanent section of the inter-ministry commission of basic nuclear facilities. The commission gave its favourable judgment which is the object of this decree. (J.S.)

  2. Vertical Motions of Oceanic Volcanoes

    Science.gov (United States)

    Clague, D. A.; Moore, J. G.

    2006-12-01

    lasting a few hundred thousand years as the island migrates over a broad flexural arch related to isostatic compensation of a nearby active volcano. The arch is located about 190±30 km away from the center of volcanic activity and is also related to the rejuvenated volcanic stage on the islands. Reefs on Oahu that are uplifted several tens of m above sea level are the primary evidence for uplift as the islands over-ride the flexural arch. At the other end of the movement spectrum, both in terms of magnitude and length of response, are the rapid uplift and subsidence that occurs as magma is accumulated within or erupted from active submarine volcanoes. These changes are measured in days to years and are of cm to m variation; they are measured using leveling surveys, tiltmeters, EDM and GPS above sea level and pressure gauges and tiltmeters below sea level. Other acoustic techniques to measure such vertical movement are under development. Elsewhere, evidence for subsidence of volcanoes is also widespread, ranging from shallow water carbonates on drowned Cretaceous guyots, to mapped shoreline features, to the presence of subaerially-erupted (degassed) lavas on now submerged volcanoes. Evidence for uplift is more limited, but includes makatea islands with uplifted coral reefs surrounding low volcanic islands. These are formed due to flexural uplift associated with isostatic loading of nearby islands or seamounts. In sum, oceanic volcanoes display a long history of subsidence, rapid at first and then slow, sometimes punctuated by brief periods of uplift due to lithospheric loading by subsequently formed nearby volcanoes.

  3. Measuring of vertical stroke Vub vertical stroke in the forthcoming decade

    International Nuclear Information System (INIS)

    Kim, C.S.

    1997-01-01

    I first introduce the importance of measuring V ub precisely. Then, from a theoretician's point of view, I review (a) past history, (b) present trials, and (c) possible future alternatives on measuring vertical stroke V ub vertical stroke and/or vertical stroke V ub /V cb vertical stroke. As of my main topic, I introduce a model-independent method, which predicts Γ(B→X u lν)/Γ(B→X c lν)≡(γ u /γ c ) x vertical stroke V ub /V cb vertical stroke 2 ≅(1.83±0.28) x vertical stroke V ub /V cb vertical stroke 2 and vertical stroke V ub /V cb vertical stroke ≡(γ c /γ u ) 1/2 x [B(B→X u lν)/B(B→ X c lν]) 1/2 ≅(0.74±0.06) x [B(B→X u lν/)B(B→X c lν)] 1/2 , based on the heavy quark effective theory I also explore the possible experimental options to separate B→X u lν from the dominant B→X c lν: the measurement of inclusive hadronic invariant mass distributions, and the 'D-π' (and 'K-π') separation conditions I also clarify the relevant experimental backgrounds. (orig.)

  4. determination of verticality of reservoir engineering structure

    African Journals Online (AJOL)

    user

    applications is 3D survey and management of oil and gas facilities and other engineering structures. This recent .... also affect ground water contamination. 2. VERTICALITY ...... The soil, water and concrete in a Reservoir at the foundation bed ...

  5. Vertical activity estimation using 2D radar

    CSIR Research Space (South Africa)

    Hakl, H

    2008-12-01

    Full Text Available Understanding airspace activity is essential for airspace control. Being able to detect vertical activity in aircraft allows prediction of aircraft intent, thereby allowing more accurate situation awareness and correspondingly more appropriate...

  6. HL-LHC vertical cryostat during construction

    CERN Multimedia

    Lanaro, Andrea

    2016-01-01

    7m high "Cluster D" vertical test cryostat during construction at contractor's premises, Alca Technology Srl, in Schio, Italy. The inner helium vessel with its heat exchanger are visible. To be installed in the D pit in SMA18.

  7. Prefabricated vertical drains, vol. I : engineering guidelines.

    Science.gov (United States)

    1986-09-01

    This volume presents procedures and guidelines applicable to the design and instal : tion of prefabricated vertical drains to accelerate consolidation of soils. The : contents represent the Consultant's interpretation of the state-of-the-art as of : ...

  8. Effects of Bacterial Inoculants and Absorbents on Fermentation Properties and Chemical Composition of Fresh Sugar Beet Pulp Silage Using Laboratory silos

    Directory of Open Access Journals (Sweden)

    Saeid Seidali Dolat-Abad

    2016-04-01

    treatment after mixing the fresh sugar beet pulp with absorbents or inoculants. Ensilages were filled in laboratory silos and packed and then were kept for 90 d in room temperature at dark. After opening the concentration of volatile and non-volatile fatty acids, crude protein, fibers, total and ammonia-N and the values of pH were measured in final produced silages. Results and Discussion In the experiment 1, concentration of dry matter (DM, neutral detergent insoluble fibers (NDF and acid detergent insoluble fibers were higher in absorbents treated silage (P>0.01 when compared with untreated one. Application of absorbents resulted in silages with lower seepages (P>0.01 production compared to the control. However, application of the absorbents to the beet pulp produced silages with lower in vitro DM digestibility (P>0.05. Straw treated silage had the highest NDF concentration and the lowest apparent and true in vitro DM digestibility. Application of absorbents produced silages with lower lactic acid (P>0.01 and higher pH (P> 0.05 and ammonia-N (P>0.01 concentration. Adding straw to sugar beet pulp produced silages with higher acetate concentration, total volatile fatty acids concentrations (VFA (P> 0.01, the ratio of ammonia-N from total N (P>0.01 but lower ratios of lactate to acetate (P>0.01, lactate to acetate + propionate (P>0.01 and lactate to VFA (P>0.05 when compared with control group. In contrast, adding pith to sugar beet pulp produced silages with lower acetate concentration (P>0.01, propionate concentration (P>0.01, total VFA (P> 0.01 but higher ratios of lactate to acetate (P> 0.01, lactate to acetate + propionate (P> 0.01 and lactate to VFA (P>0.05 when compared with control group. The Fleig point was not affected by the different treatments. Application of bacterial inoculant resulted in silages with higher DM concentration (P>0.01, water soluble carbohydrates concentration (P> 0.01 and in vitro DM digestibility (P>0.05 but lower crude protein concentration

  9. Electrically Pumped Vertical-Cavity Amplifiers

    DEFF Research Database (Denmark)

    Greibe, Tine

    2007-01-01

    In this work, the design of electrically pumped vertical cavity semiconductor optical amplifiers (eVCAs) for use in a mode-locked external-cavity laser has been developed, investigated and analysed. Four different eVCAs, one top-emitting and three bottom emitting structures, have been designed...... and discussed. The thesis concludes with recommendations for further work towards the realisation of compact electrically pumped mode-locked vertical externalcavity surface emitting lasers....

  10. Vertical Josephson Interferometer for Tunable Flux Qubit

    Energy Technology Data Exchange (ETDEWEB)

    Granata, C [Istituto di Cibernetica ' E. Caianiello' del Consiglio Nazionale delle Ricerche, I- 80078, Pozzuoli (Italy); Vettoliere, A [Istituto di Cibernetica ' E. Caianiello' del Consiglio Nazionale delle Ricerche, I- 80078, Pozzuoli (Italy); Lisitskiy, M [Istituto di Cibernetica ' E. Caianiello' del Consiglio Nazionale delle Ricerche, I- 80078, Pozzuoli (Italy); Rombetto, S [Istituto di Cibernetica ' E. Caianiello' del Consiglio Nazionale delle Ricerche, I- 80078, Pozzuoli (Italy); Russo, M [Istituto di Cibernetica ' E. Caianiello' del Consiglio Nazionale delle Ricerche, I- 80078, Pozzuoli (Italy); Ruggiero, B [Istituto di Cibernetica ' E. Caianiello' del Consiglio Nazionale delle Ricerche, I- 80078, Pozzuoli (Italy); Corato, V [Dipartimento di Ingegneria dell' Informazione, Seconda Universita di Napoli, I-8 1031, Aversa (Italy) and Istituto di Cibernetica ' E. Caianiello' del CNR, I-80078, Pozzuoli (Italy); Russo, R [Dipartimento di Ingegneria dell' Informazione, Seconda Universita di Napoli, I-8 1031, Aversa (Italy) and Istituto di Cibernetica ' E. Caianiello' del CNR, I-80078, Pozzuoli (Italy); Silvestrini, P [Dipartimento di Ingegneria dell' Informazione, Seconda Universita di Napoli, I-8 1031, Aversa (Italy) and Istituto di Cibernetica ' E. Caianiello' del CNR, I-80078, Pozzuoli (Italy)

    2006-06-01

    We present a niobium-based Josephson device as prototype for quantum computation with flux qubits. The most interesting feature of this device is the use of a Josephson vertical interferometer to tune the flux qubit allowing the control of the off-diagonal Hamiltonian terms of the system. In the vertical interferometer, the Josephson current is precisely modulated from a maximum to zero with fine control by a small transversal magnetic field parallel to the rf superconducting loop plane.

  11. Vertical Scan-Conversion for Filling Purposes

    OpenAIRE

    Hersch, R. D.

    1988-01-01

    Conventional scan-conversion algorithms were developed independently of filling algorithms. They cause many problems, when used for filling purposes. However, today's raster printers and plotters require extended use of filling, especially for the generation of typographic characters and graphic line art. A new scan-conversion algorithm, called vertical scan-conversion has been specifically designed to meet the requirements of parity scan line fill algorithms. Vertical scan-conversion ensures...

  12. Aerobic stability of triticale silage in single culture or in mixtures with oat and/or legumes Estabilidade aeróbia de silagens de triticale em cultivo exclusivo ou em misturas com aveia e/ou leguminosas

    Directory of Open Access Journals (Sweden)

    Valter Harry Bumbieris Junior

    2010-11-01

    Full Text Available The objective of the present study was to evaluate the aerobic stability and losses during the fermentation process of triticale silages in single crop or in mixtures with oats and/or legumes. The following crops were used for silage production: triticale (X. Triticosecale Wittimack, triticale intercropped with forage pea (Pisum arvense and triticale intercropped with oats (Avena strigosa Schreb, forage pea and vetch (Vicia sativa. The dry matter content and its recovery did not differ among the silages. Buffer capacity was higher for tricale silage intercropped with oats, forage pea and vetch(88.67 m eq. NaOH/100 g DM followed by triticale intercropped with forage pea (80.80 m eq. NaOH/100 g DM. Electric conductivity values were higher in the intercropped triticale silages. Triticale silage presented the lowest temperatures observed in the silos, and the silages of intercropped triticale silages presented higher heat retention and higher pH values. Silage of triticale intercropped with oats and legumes presented lower aerobic stability but it did not reduce the aerobic stability of the total feed. Dry matter recovery during storage and in stability evaluations in aerobiosis is similar among the silages.O objetivo neste trabalho foi avaliar a estabilidade aeróbia e as perdas durante o processo de fermentação de silagens de triticale em cultivo exclusivo ou em misturas com aveia e/ou leguminosas. As culturas utilizadas para produção das silagens foram: triticale (X. Triticosecale Wittimack; triticale em consórcio com ervilha-forrageira (Pisum arvense; e triticale em consórcio com aveia (Avena strigosa Schreb, ervilha-forrageira e ervilhaca (Vicia sativa. O teor de matéria seca e a recuperação de matéria seca não diferiram entre as silagens. A capacidade tampão foi maior para a silagem de triticale cultivado em consórcio com aveia, ervilha-forrageira e ervilhaca (88,67 m eq. NaOH/100 g de MS, seguida da silagem de triticale cultivado

  13. Marketing em moda

    OpenAIRE

    Leães, Sabrina Durgante

    2008-01-01

    Dissertação de mestrado em Design e Marketing O actual estado do Marketing em Moda é uma das questões ainda complexa com que se debate a sociedade global. As questões do Marketing em Moda percorrem alguns aspectos fundamentais tais como as constantes mutações do meio envolvente, a forma de como é percebida e comunicada a identidade das marcas de moda, em busca da melhor forma de segmentar o mercado e definir o seu posicionamento, bem como a reacção ao produto de moda do consumidor final. ...

  14. Analysis of the direction of plasma vertical movement during major disruptions in ITER

    International Nuclear Information System (INIS)

    Lukash, Victor; Sugihara, Masayoshi; Gribov, Yuri; Fujieda, Hirobumi

    2005-01-01

    The plasma movement in the upward direction (away from the X-point) after the thermal quench (TQ) of major disruptions in ITER is favourable for the machine design, since the downward movement causes larger electromagnetic (EM) load due to the induced eddy and halo currents. Vertical directions of plasma movement after the TQ in ITER are investigated using the predictive mode of the DINA code. Three dominant parameters in determining the direction of plasma movement are identified: (i) the rate of plasma current quench (plasma temperature after the TQ) (ii) the width of plasma current mixing area just after the TQ (change of the internal plasma inductance l i ) and (iii) the initial vertical position of plasma column before the TQ. It is shown that the reference ITER plasma moves upwards after the TQ, if the electron temperature after the TQ is less than 10 eV and the drop of l i does not exceed 0.2 for the present reference initial vertical position (55.5 cm above the centre of the machine). It is also shown that the operational domain leading to the upward movement is considerably large for disruptions with fast current quench, which could generate quite severe EM load due to the induced eddy current combined with the induced halo current if the movement is downwards

  15. Emergency Medical Service (EMS) Stations

    Data.gov (United States)

    Kansas Data Access and Support Center — EMS Locations in Kansas The EMS stations dataset consists of any location where emergency medical services (EMS) personnel are stationed or based out of, or where...

  16. Vertical integration in the nuclear fuel cycle

    International Nuclear Information System (INIS)

    Mommsen, J.T.

    1977-01-01

    Vertical integration in the nuclear fuel cycle and its contribution to market power of integrated fuel suppliers were studied. The industry subdivision analyzed is the uranium raw materials sector. The hypotheses demonstrated are that (1) this sector of the industry is trending toward vertical integration between production of uranium raw materials and the manufacture of nuclear fuel elements, and (2) this vertical integration confers upon integrated firms a significant market advantage over non-integrated fuel manufacturers. Under microeconomic concepts the rationale for vertical integration is the pursuit of efficiency, and it is beneficial because it increases physical output and decreases price. The Market Advantage Model developed is an arithmetical statement of the relative market power (in terms of price) between non-integrated nuclear fuel manufacturers and integrated raw material/fuel suppliers, based on the concept of the ''squeeze.'' In operation, the model compares net profit and return on sales of nuclear fuel elements between the competitors, under different price and cost circumstances. The model shows that, if integrated and non-integrated competitors sell their final product at identical prices, the non-integrated manufacturer returns a net profit only 17% of the integrated firm. Also, the integrated supplier can price his product 35% below the non-integrated producer's price and still return the same net profit. Vertical integration confers a definite market advantage to the integrated supplier, and the basic source of that advantage is the cost-price differential of the raw material, uranium

  17. Climatology of tropospheric vertical velocity spectra

    Science.gov (United States)

    Ecklund, W. L.; Gage, K. S.; Balsley, B. B.; Carter, D. A.

    1986-01-01

    Vertical velocity power spectra obtained from Poker Flat, Alaska; Platteville, Colorado; Rhone Delta, France; and Ponape, East Caroline Islands using 50-MHz clear-air radars with vertical beams are given. The spectra were obtained by analyzing the quietest periods from the one-minute-resolution time series for each site. The lengths of available vertical records ranged from as long as 6 months at Poker Flat to about 1 month at Platteville. The quiet-time vertical velocity spectra are shown. Spectral period ranging from 2 minutes to 4 hours is shown on the abscissa and power spectral density is given on the ordinate. The Brunt-Vaisala (B-V) periods (determined from nearby sounding balloons) are indicated. All spectra (except the one from Platteville) exhibit a peak at periods slightly longer than the B-V period, are flat at longer periods, and fall rapidly at periods less than the B-V period. This behavior is expected for a spectrum of internal waves and is very similar to what is observed in the ocean (Eriksen, 1978). The spectral amplitudes vary by only a factor of 2 or 3 about the mean, and show that under quiet conditions vertical velocity spectra from the troposphere are very similar at widely different locations.

  18. A Physician's Perspective On Vertical Integration.

    Science.gov (United States)

    Berenson, Robert A

    2017-09-01

    Vertical integration has been a central feature of health care delivery system change for more than two decades. Recent studies have demonstrated that vertically integrated health care systems raise prices and costs without observable improvements in quality, despite many theoretical reasons why cost control and improved quality might occur. Less well studied is how physicians view their newfound partnerships with hospitals. In this article I review literature findings and other observations on five aspects of vertical integration that affect physicians in their professional and personal lives: patients' access to physicians, physician compensation, autonomy versus system support, medical professionalism and culture, and lifestyle. I conclude that the movement toward physicians' alignment with and employment in vertically integrated systems seems inexorable but that policy should not promote such integration either intentionally or inadvertently. Instead, policy should address the flaws in current payment approaches that reward high prices and excessive service use-outcomes that vertical integration currently produces. Project HOPE—The People-to-People Health Foundation, Inc.

  19. <em>Angiostrongylus vasorumem> in red foxes (<em>Vulpes vulpesem> and badgers (<em>Meles melesem> from Central and Northern Italy

    Directory of Open Access Journals (Sweden)

    Marta Magi

    2010-06-01

    Full Text Available Abstract During 2004-2005 and 2007-2008, 189 foxes (<em>Vulpes vulpesem> and 6 badgers (<em>Meles melesem> were collected in different areas of Central Northern Italy (Piedmont, Liguria and Tuscany and examined for <em>Angiostrongylus vasorumem> infection. The prevalence of the infection was significantly different in the areas considered, with the highest values in the district of Imperia (80%, Liguria and in Montezemolo (70%, southern Piedmont; the prevalence in Tuscany was 7%. One badger collected in the area of Imperia turned out to be infected, representing the first report of the parasite in this species in Italy. Further studies are needed to evaluate the role played by fox populations as reservoirs of infection and the probability of its spreading to domestic dogs.
    Riassunto <em>Angiostrongylus vasorumem> nella volpe (<em>Vulpes vulpesem> e nel tasso (<em>Meles melesem> in Italia centro-settentrionale. Nel 2004-2005 e 2007-2008, 189 volpi (<em>Vulpes vulpesem> e 6 tassi (<em>Meles melesem> provenienti da differenti aree dell'Italia settentrionale e centrale (Piemonte, Liguria Toscana, sono stati esaminati per la ricerca di <em>Angiostrongylus vasorumem>. La prevalenza del nematode è risultata significativamente diversa nelle varie zone, con valori elevati nelle zone di Imperia (80% e di Montezemolo (70%, provincia di Cuneo; la prevalenza in Toscana è risultata del 7%. Un tasso proveniente dall'area di Imperia è risultato positivo per A. vasorum; questa è la prima segnalazione del parassita in tale specie in Italia. Ulteriori studi sono necessari per valutare il potenziale della volpe come serbatoio e la possibilità di diffusione della parassitosi ai cani domestici.

    doi:10.4404/hystrix-20.2-4442

  20. Measurement of vertical stroke Vcb vertical stroke at the Z energy from B mesons exclusive decays

    International Nuclear Information System (INIS)

    Marinelli, N.

    1998-01-01

    Recent ALEPH, DELPHI and OPAL measurements of the form factors in the exclusive decay modes anti B 0 → D *+ l - anti ν l and anti B 0 →D + l - anti ν l are reviewed here. The values obtained allow an almost model-independent determination of vertical stroke V cb vertical stroke in the HQET framework. (orig.)

  1. Measurement of vertical stroke Vub vertical stroke using b hadron semileptonic decay

    International Nuclear Information System (INIS)

    Abbiendi, G.; Aakesson, P.F.

    2001-01-01

    The magnitude of the CKM matrix element vertical stroke V ub vertical stroke is determined by measuring the inclusive charmless semileptonic branching fraction of beauty hadrons at OPAL based on b → X u lν event topology and kinematics. This analysis uses OPAL data collected between 1991 and 1995, which correspond to about four million hadronic Z decays. We measure Br(b → X u lν) to be (1.63 ±0.53 +0.55 -0.62 ) x 10 -3 . The first uncertainty is the statistical error and the second is the systematic error. From this analysis, vertical stroke V ub vertical stroke is determined to be: vertical stroke V ub vertical stroke =(4.00±0.65(stat) +0.67 -0.76 (sys)±0.19(HQE)) x 10 -3 . The last error represents the theoretical uncertainties related to the extraction of vertical stroke V ub vertical stroke from Br(b→X u l ν) using the Heavy Quark Expansion. (orig.)

  2. A global vertical reference frame based on four regional vertical datums

    Czech Academy of Sciences Publication Activity Database

    Burša, Milan; Kenyon, S.; Kouba, J.; Šíma, Zdislav; Vatrt, V.; Vojtíšková, M.

    2004-01-01

    Roč. 48, č. 3 (2004), s. 493-502 ISSN 0039-3169 Institutional research plan: CEZ:AV0Z1003909 Keywords : geopotentinal * local vertical datums * global vertical reference frame Subject RIV: BN - Astronomy, Celestial Mechanics, Astrophysics Impact factor: 0.447, year: 2004

  3. On the vertical structure of wind gusts

    DEFF Research Database (Denmark)

    Suomi, I.; Gryning, Sven-Erik; Floors, Rogier Ralph

    2015-01-01

    The increasing size of wind turbines, their height and the area swept by their blades have revised the need for understanding the vertical structure of wind gusts. Information is needed for the whole profile. In this study, we analyzed turbulence measurements from a 100m high meteorological mast...... and the turbulence intensity, of which the turbulence intensity was found to dominate over the peak factor in determining the effects of stability and height above the surface on the gust factor. The peak factor only explained 15% or less of the vertical decrease of the gust factor, but determined the effect of gust...... duration on the gust factor. The statistical method to estimate the peak factor did not reproduce the observed vertical decrease in near-neutral and stable conditions and near-constant situation in unstable conditions. Despite this inconsistency, the theoretical method provides estimates for the peak...

  4. Vertical Footbridge Vibrations: The Response Spectrum Methodology

    DEFF Research Database (Denmark)

    Georgakis, Christos; Ingólfsson, Einar Thór

    2008-01-01

    In this paper, a novel, accurate and readily codifiable methodology for the prediction of vertical footbridge response is presented. The methodology is based on the well-established response spectrum approach used in the majority of the world’s current seismic design codes of practice. The concept...... of a universally applicable reference response spectrum is introduced, from which the pedestrian-induced vertical response of any footbridge may be determined, based on a defined “event” and the probability of occurrence of that event. A series of Monte Carlo simulations are undertaken for the development...... period is introduced and its implication on the calculation of footbridge response is discussed. Finally, a brief comparison is made between the theoretically predicted pedestrian-induced vertical response of an 80m long RC footbridge (as an example) and actual field measurements. The comparison shows...

  5. Certified standards and vertical coordination in aquaculture

    DEFF Research Database (Denmark)

    Trifkovic, Neda

    2014-01-01

    This paper explores the interaction between food standards and vertical coordination in the Vietnamese pangasius sector. For farmers and processors alike, the adoption of standards is motivated by a desire to improve market access by ensuring high quality supply. Instead of encouraging the applic......This paper explores the interaction between food standards and vertical coordination in the Vietnamese pangasius sector. For farmers and processors alike, the adoption of standards is motivated by a desire to improve market access by ensuring high quality supply. Instead of encouraging...... the application of standards and contract farming, processing companies prefer to vertically integrate primary production largely due to concerns over the stable supply of pangasius with satisfactory quality and safety attributes. These tendencies increase the market dominance of industrial farming and worsen...

  6. Vertical vibration analysis for elevator compensating sheave

    International Nuclear Information System (INIS)

    Watanabe, Seiji; Nakazawa, Daisuke; Fukui, Daiki; Okawa, Takeya

    2013-01-01

    Most elevators applied to tall buildings include compensating ropes to satisfy the balanced rope tension between the car and the counter weight. The compensating ropes receive tension by the compensating sheave, which is installed at the bottom space of the elevator shaft. The compensating sheave is only suspended by the compensating ropes, therefore, the sheave can move vertically while the car is traveling. This paper shows the elevator dynamic model to evaluate the vertical motion of the compensating sheave. Especially, behavior in emergency cases, such as brake activation and buffer strike, was investigated to evaluate the maximum upward motion of the sheave. The simulation results were validated by experiments and the most influenced factor for the sheave vertical motion was clarified

  7. Plasmonic Properties of Vertically Aligned Nanowire Arrays

    Directory of Open Access Journals (Sweden)

    Hua Qi

    2012-01-01

    Full Text Available Nanowires (NWs/Ag sheath composites were produced to investigate plasmonic coupling between vertically aligned NWs for surface-enhanced Raman scattering (SERS applications. In this investigation, two types of vertical NW arrays were studied; those of ZnO NWs grown on nanosphere lithography patterned sapphire substrate via vapor-liquid-solid (VLS mechanism and Si NW arrays produced by wet chemical etching. Both types of vertical NW arrays were coated with a thin layer of silver by electroless silver plating for SERS enhancement studies. The experimental results show extremely strong SERS signals due to plasmonic coupling between the NWs, which was verified by COMSOL electric field simulations. We also compared the SERS enhancement intensity of aligned and random ZnO NWs, indicating that the aligned NWs show much stronger and repeatable SERS signal than those grown in nonaligned geometries.

  8. Vertical gradients of sunspot magnetic fields

    Science.gov (United States)

    Hagyard, M. J.; Teuber, D.; West, E. A.; Tandberg-Hanssen, E.; Henze, W., Jr.; Beckers, J. M.; Bruner, M.; Hyder, C. L.; Woodgate, B. E.

    1983-01-01

    The results of a Solar Maximum Mission (SMM) guest investigation to determine the vertical gradients of sunspot magnetic fields for the first time from coordinated observations of photospheric and transition-region fields are described. Descriptions are given of both the photospheric vector field of a sunspot, derived from observations using the NASA Marshall Space Flight Center vector magnetograph, and of the line-of-sight component in the transition region, obtained from the SMM Ultraviolet Spectrometer and Polarimeter instrument. On the basis of these data, vertical gradients of the line-of-sight magnetic field component are calculated using three methods. It is found that the vertical gradient of Bz is lower than values from previous studies and that the transition-region field occurs at a height of approximately 4000-6000 km above the photosphere.

  9. Vertical vibration analysis for elevator compensating sheave

    Science.gov (United States)

    Watanabe, Seiji; Okawa, Takeya; Nakazawa, Daisuke; Fukui, Daiki

    2013-07-01

    Most elevators applied to tall buildings include compensating ropes to satisfy the balanced rope tension between the car and the counter weight. The compensating ropes receive tension by the compensating sheave, which is installed at the bottom space of the elevator shaft. The compensating sheave is only suspended by the compensating ropes, therefore, the sheave can move vertically while the car is traveling. This paper shows the elevator dynamic model to evaluate the vertical motion of the compensating sheave. Especially, behavior in emergency cases, such as brake activation and buffer strike, was investigated to evaluate the maximum upward motion of the sheave. The simulation results were validated by experiments and the most influenced factor for the sheave vertical motion was clarified.

  10. Study on characteristics of vertical strong motions

    International Nuclear Information System (INIS)

    Akao, Y.; Katukura, H.; Fukushima, S.; Mizutani, M.

    1993-01-01

    Statistic properties of vertical strong ground motions from near-field earthquakes are discussed in comparison with that of horizontal motions. It is a feature of this analysis that time history of each observed record is divided into direct P- and S-wave segments from a seismological viewpoint. Following results are obtained. Vertical motion energy excited by direct S-waves is about 0.6 times of horizontal ones at deep underground, and it approaches to 1.0 at shallow place. Horizontal motion energy excited by direct P-waves becomes 0.2 times (at deep) or more (at shallow) of vertical one. These results can be available in modeling of input motions for aseismic design. (author)

  11. Vertical stability, high elongation, and the consequences of loss of vertical control on DIII-D

    International Nuclear Information System (INIS)

    Kellman, A.G.; Ferron, J.R.; Jensen, T.H.; Lao, L.L.; Luxon, J.L.; Skinner, D.G.; Strait, E.J.; Reis, E.; Taylor, T.S.; Turnbull, A.D.; Lazarus, E.A.; Lister, J.B.

    1990-09-01

    Recent modifications to the vertical control system for DIII-D has enabled operation of discharges with vertical elongation κ, up to 2.5. When vertical stability is lost, a disruption follows and a large vertical force on the vacuum vessel is observed. The loss of plasma energy begins when the edge safety factor q is 2 but the current decay does not begin until q ∼1.3. Current flow on the open field lines in the plasma scrapeoff layer has been measured and the magnitude and distribution of these currents can explain the observed force on the vessel. Equilibrium calculations and simulation of this vertical displacement episode are presented. 7 refs., 4 figs

  12. The Revolutionary Vertical Lift Technology (RVLT) Project

    Science.gov (United States)

    Yamauchi, Gloria K.

    2018-01-01

    The Revolutionary Vertical Lift Technology (RVLT) Project is one of six projects in the Advanced Air Vehicles Program (AAVP) of the NASA Aeronautics Research Mission Directorate. The overarching goal of the RVLT Project is to develop and validate tools, technologies, and concepts to overcome key barriers for vertical lift vehicles. The project vision is to enable the next generation of vertical lift vehicles with aggressive goals for efficiency, noise, and emissions, to expand current capabilities and develop new commercial markets. The RVLT Project invests in technologies that support conventional, non-conventional, and emerging vertical-lift aircraft in the very light to heavy vehicle classes. Research areas include acoustic, aeromechanics, drive systems, engines, icing, hybrid-electric systems, impact dynamics, experimental techniques, computational methods, and conceptual design. The project research is executed at NASA Ames, Glenn, and Langley Research Centers; the research extensively leverages partnerships with the US Army, the Federal Aviation Administration, industry, and academia. The primary facilities used by the project for testing of vertical-lift technologies include the 14- by 22-Ft Wind Tunnel, Icing Research Tunnel, National Full-Scale Aerodynamics Complex, 7- by 10-Ft Wind Tunnel, Rotor Test Cell, Landing and Impact Research facility, Compressor Test Facility, Drive System Test Facilities, Transonic Turbine Blade Cascade Facility, Vertical Motion Simulator, Mobile Acoustic Facility, Exterior Effects Synthesis and Simulation Lab, and the NASA Advanced Supercomputing Complex. To learn more about the RVLT Project, please stop by booth #1004 or visit their website at https://www.nasa.gov/aeroresearch/programs/aavp/rvlt.

  13. Vertically Integrated Multinationals and Productivity Spillovers

    DEFF Research Database (Denmark)

    Clementi, Federico; Bergmann, Friedrich

    are not automatic. In this paper, we study how these externalities are affected by the strategy of vertical integration of foreign multinationals. Our analysis, based on firm-level data of European manufacturing companies, shows that local firms perceive weaker backward spillovers if client foreign affiliates...... are vertically integrated in their industry. The spillovers that arise from the activity of companies that do not invest in the domestic firms’ industry are 2.6 to 5 times stronger than the ones than come from affiliates of multinationals that invest in the industry of local firms....

  14. Thermal Stratification in Vertical Mantle Tanks

    DEFF Research Database (Denmark)

    Knudsen, Søren; Furbo, Simon

    2001-01-01

    It is well known that it is important to have a high degree of thermal stratification in the hot water storage tank to achieve a high thermal performance of SDHW systems. This study is concentrated on thermal stratification in vertical mantle tanks. Experiments based on typical operation conditions...... are carried out to investigate how the thermal stratification is affected by different placements of the mantle inlet. The heat transfer between the solar collector fluid in the mantle and the domestic water in the inner tank is analysed by CFD-simulations. Furthermore, the flow pattern in the vertical mantle...

  15. Breakwaters with Vertical and Inclined Concrete Walls

    DEFF Research Database (Denmark)

    Burcharth, Hans Falk

    Following the PIANC PTC II working group on Analyses of Rubble Mound Breakwaters it was, in 1991, decided to form Working Group (WG) n° 28 on "Breakwaters with vertical and inclined concrete walls" The scope of the work was to achieve a better understanding of the overall safety aspects in the de......Following the PIANC PTC II working group on Analyses of Rubble Mound Breakwaters it was, in 1991, decided to form Working Group (WG) n° 28 on "Breakwaters with vertical and inclined concrete walls" The scope of the work was to achieve a better understanding of the overall safety aspects...

  16. Preserving the Modernist Vertical Urban Factory

    Directory of Open Access Journals (Sweden)

    Nina Rappaport

    2016-07-01

    Full Text Available This essay is adapted in part, from the section, “Modern Factory Architecture” case studies from Nina Rappaport’s book Vertical Urban Factory, published by Actar this spring. Vertical Urban Factory began as an architecture studio, and then an exhibition, which opened in New York in 2011 and traveled to Detroit and Toronto in 2012. Last year the show was displayed at Archizoom at EPFL in Lausanne; Industry City, Brooklyn; and the Charles Moore School of Architecture at Kean University, in New Jersey. The project continues as a think tank evaluating factory futures and urban industrial potential.

  17. Geophysical aspects of vertical streamer seismic data

    Energy Technology Data Exchange (ETDEWEB)

    Sognnes, Walter

    1999-12-31

    Vertical cable acquisition is performed by deploying a certain number of vertical hydrophone arrays in the water column, and subsequently shooting a source point on top of it. The advantage of this particular geometry is that gives a data set with all azimuths included. Therefore a more complete 3-D velocity model can be derived. In this paper there are presented some results from the Fuji survey in the Gulf of Mexico. Based on these results, improved geometries and review recommendations for future surveys are discussed. 7 figs.

  18. Geophysical aspects of vertical streamer seismic data

    Energy Technology Data Exchange (ETDEWEB)

    Sognnes, Walter

    1998-12-31

    Vertical cable acquisition is performed by deploying a certain number of vertical hydrophone arrays in the water column, and subsequently shooting a source point on top of it. The advantage of this particular geometry is that gives a data set with all azimuths included. Therefore a more complete 3-D velocity model can be derived. In this paper there are presented some results from the Fuji survey in the Gulf of Mexico. Based on these results, improved geometries and review recommendations for future surveys are discussed. 7 figs.

  19. Measurement of the CKM matrix element vertical stroke Vts vertical stroke 2

    International Nuclear Information System (INIS)

    Unverdorben, Christopher Gerhard

    2015-03-01

    This is the first direct measurement of the CKM matrix element vertical stroke V ts vertical stroke, using data collected by the ATLAS detector in 2012 at √(s)= 8 TeV pp-collisions with a total integrated luminosity of 20.3 fb -1 . The analysis is based on 112 171 reconstructed t anti t candidate events in the lepton+jets channel, having a purity of 90.0 %. 183 t anti t→W + W - b anti s decays are expected (charge conjugation implied), which are available for the extraction of the CKM matrix element vertical stroke V ts vertical stroke 2 . To identify these rare decays, several observables are examined, such as the properties of jets, tracks and of b-quark identification algorithms. Furthermore, the s-quark hadrons K 0 s are considered, reconstructed by a kinematic fit. The best observables are combined in a multivariate analysis, called ''boosted decision trees''. The responses from Monte Carlo simulations are used as templates for a fit to data events yielding a significance value of 0.7σ for t→s+W decays. An upper limit of vertical stroke V ts vertical stroke 2 <1.74 % at 95 % confidence level is set, including all systematic and statistical uncertainties. So this analysis, using a direct measurement of the CKM matrix element vertical stroke V ts vertical stroke 2 , provides the best direct limit on vertical stroke V ts vertical stroke 2 up to now.

  20. Development of dynamic 3-D surface profilometry using stroboscopic interferometric measurement and vertical scanning techniques

    Energy Technology Data Exchange (ETDEWEB)

    Fan, K-C [Department of Mechanical Engineering, National Taiwan University, 1, Sec. 4 Roosevelt Rd, Taipei, Taiwan (China); Chen, L-C [Graduate Institute of Automation Technology, National Taipei University of Technology, 1 Sec. 3 Chung-Hsiao East Rd, Taipei, 106, Taiwan (China); Lin, C-D [Department of Mechanical Engineering, National Taiwan University, 1, Sec. 4 Roosevelt Rd, Taipei, Taiwan (China); Chang, Calvin C [Industrial Technology Research Institute, Centre for Measurement Standards, 321 Sec. 2, Kuang Fu Rd, Hsinchu, Taiwan, 300 (China); Kuo, C-F [Industrial Technology Research Institute, Centre for Measurement Standards, 321 Sec. 2, Kuang Fu Rd, Hsinchu, Taiwan, 300 (China); Chou, J-T [Industrial Technology Research Institute, Centre for Measurement Standards, 321 Sec. 2, Kuang Fu Rd, Hsinchu, Taiwan, 300 (China)

    2005-01-01

    The main objective of this technical advance is to provide a single optical interferometric framework and methodology to be capable of delivering both nano-scale static and dynamic surface profilometry. Microscopic interferometry is a powerful technique for static and dynamic characterization of micro (opto) electromechanical systems (M (O) EMS). In view of this need, a microscopic prototype based on white-light stroboscopic interferometry and the white light vertical scanning principle, was developed to achieve dynamic full-field profilometry and characterization of MEMS devices. The system primarily consists of an optical microscope, on which a Mirau interferometric objective embedded with a piezoelectric vertical translator, a high-power LED light module with dual operation modes and light synchronizing electronics unit are integrated. A micro cantilever beam used in AFM was measured to verify the system capability in accurate characterization of dynamic behaviours of the device. The full-field second-mode vibration at a vibratory frequency of 68.60 kHz can be fully characterized and 3-5 nm of vertical measurement resolution as well as tens of micrometers of vertical measurement range can be easily achieved.

  1. An experimental and computational investigation of gas/particle flow in a vertical lifter

    Energy Technology Data Exchange (ETDEWEB)

    Mathisen, Anette

    2010-07-01

    Experimental and computational investigations of dilute gas/particle flow in a vertical lifter are performed. The effect of superficial gas velocity, particle density, particle size distribution and particle loading on particle velocities, particle fluctuations and particle cross-moment have been studied experimentally using laser Doppler anemometry (LDA) and particle image velocimetry (PIV). The results from the experimental investigation is compared with the computational investigation using FluentR. The experimental measurements are performed on a lab-scale vertical lifter, consisting of a fluidizing silo and a receiving tank with a glass pipe in which the solids phase is transported. The particles are placed in the fluidization tank and transport air enters at the bottom of the silo. The transport pipe is suspended above the inlet and as the transport air passes the opening, the particles are dragged into the air flow and transported upwards to the receiving tank. Fluidizing air is used to control the particle loading in the system and supplied through a distribution plate. The test section of the transport pipe is made of glass to enable the use of the optical laser based investigation techniques, LDA and PIV. Two types of powders are used, ZrO{sub 2} and glass, each with two different particle size distributions, average diameter of 260 and 530 micron and 120 and 518 micron, respectively. The experimental techniques LDA and PIV are used to investigate a dilute gas/particle vertical flow. The two techniques are also evaluated for use on this type of flow. LDA is a single point measurement technique, which means that one point is measured at a time. The acquisition stops when a pre-set criteria is reached, this can either be based on sample number or time. A measurement spanning over the whole cross-section of the pipe consists of several points. These points makes up a cross-sectional profile. PIV on the other hand is a whole field technique and consequently

  2. 33 CFR 118.85 - Lights on vertical lift bridges.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Lights on vertical lift bridges... BRIDGES BRIDGE LIGHTING AND OTHER SIGNALS § 118.85 Lights on vertical lift bridges. (a) Lift span lights. The vertical lift span of every vertical lift bridge shall be lighted so that the center of the...

  3. Salmonella sp. bacteriology monitoring in laying hens at different growing and laying periods from poultry farms in Metropolitan Region of Fortaleza Monitoramento bacteriológico para Salmonella sp. em poedeira comercial em diferentes fases de recria e produção de empresas avícolas da Região Metropolitana de Fortaleza

    Directory of Open Access Journals (Sweden)

    Emanuella Evangelista da Silva

    2008-07-01

    Full Text Available

    This work aimed to verify <em>Salmonella> occurrence in laying hen flocks from eight poultry farms in Metropolitan Region of Fortaleza city. Swab collections were performed in transport boxes of day-old-chicks, totaling 40 feces samples (5 samples/flock, which presented no <em>Salmonella> contamination. Bacterial analyses from a pool of feces were performed in the same flocks at 10, 20, 30 and 40 weeks of age. <em>Salmonella enterica em>rough strain and <em>Salmonella em>Newport were found in two flocks at 20 and 40 weeks of age, respectively. These results suggest that the birds were infected with <em>Salmonella em>after their arrival in the poultry farms. It was verified that 25% of the poultry farms presented positive feces samples for <em>Salmonella> contamination, indicating the need for a more efficacious preventive program in the poultry farms for egg production. This work suggests that day old birds were of <em>Salmonella> contamination which indicates no vertical <em>Salmonella> transmission, however the rearing phase present failures regarding bacterial control.

     

    KEY WORDS: Bacteriology, chickens, eggs, feces, Salmonella.

    O presente trabalho objetivou investigar a presença de <em>Salmonella em>em lotes de poedeiras comerciais de oito empresas da região metropolitana de Fortaleza,CE, Brasil. Realizaram-se suabes em cinco caixas de transporte por lote das oito empresas analisadas, totalizando quarenta amostras de mecônio, sendo todas negativas para <em>Salmonella. em>Os mesmos lotes (oito foram monitorados na décima, vigésima, trigésima e quadragésima semanas de idade com exame bacteriológico de <em>pool> de cem fezes frescas. Foram isoladas <em>Salmonella> <em>enterica em>subsepécie <em>enterica> cepa rugosa e<em> Salmonella em>Newport> em>das amostras de fezes nas empresas 2 e 6 na

  4. Vortex capturing vertical axis wind turbine

    International Nuclear Information System (INIS)

    Zannetti, L; Gallizio, F; Ottino, G

    2007-01-01

    An analytical-numerical study is presented for an innovative lift vertical axis turbine whose blades are designed with vortex trapping cavities that act as passive flow control devices. The unsteady flow field past one-bladed and two-bladed turbines is described by a combined analytical and numerical method based on conformal mapping and on a blob vortex method

  5. Digital Microfluidic System with Vertical Functionality

    Directory of Open Access Journals (Sweden)

    Brian F. Bender

    2015-11-01

    Full Text Available Digital (droplet microfluidics (DµF is a powerful platform for automated lab-on-a-chip procedures, ranging from quantitative bioassays such as RT-qPCR to complete mammalian cell culturing. The simple MEMS processing protocols typically employed to fabricate DµF devices limit their functionality to two dimensions, and hence constrain the applications for which these devices can be used. This paper describes the integration of vertical functionality into a DµF platform by stacking two planar digital microfluidic devices, altering the electrode fabrication process, and incorporating channels for reversibly translating droplets between layers. Vertical droplet movement was modeled to advance the device design, and three applications that were previously unachievable using a conventional format are demonstrated: (1 solutions of calcium dichloride and sodium alginate were vertically mixed to produce a hydrogel with a radially symmetric gradient in crosslink density; (2 a calcium alginate hydrogel was formed within the through-well to create a particle sieve for filtering suspensions passed from one layer to the next; and (3 a cell spheroid formed using an on-chip hanging-drop was retrieved for use in downstream processing. The general capability of vertically delivering droplets between multiple stacked levels represents a processing innovation that increases DµF functionality and has many potential applications.

  6. Vertical retorts for distilling, carbonizing, roasting, etc

    Energy Technology Data Exchange (ETDEWEB)

    Walker, H R.L.; Bates, W R

    1917-11-17

    In a continuously operated vertical retort for destructive distillation or roasting the combination of an annular internally and externally heated construction with an annular plunger adapted to compress and assist the travel of the charge and to aid in discharging material substantially is described.

  7. The Design Philosophy for a Vertical Breakwater

    DEFF Research Database (Denmark)

    Vrijling, J. K.; Burcharth, H. F.; Voortman, H. G.

    2000-01-01

    A consistent risk-based design philosophy for vertical breakwaters is proposed. The design philosophy consists of a two-step approach. The first step is the definition of the main function of the breakwater, which leads to a definition of failure. The second step is the choice of the acceptable...

  8. Determinants Of Vertical And Horizontal Export Diversification ...

    African Journals Online (AJOL)

    The study also reveals domestic investment plays an important role to enhance vertical as well as horizontal export diversification for East Asia, while it only ... resource-based industries and gradually shift production and exports from customary products to more dynamic ones by developing competitive advantage in the ...

  9. A Comparison of Methods of Vertical Equating.

    Science.gov (United States)

    Loyd, Brenda H.; Hoover, H. D.

    Rasch model vertical equating procedures were applied to three mathematics computation tests for grades six, seven, and eight. Each level of the test was composed of 45 items in three sets of 15 items, arranged in such a way that tests for adjacent grades had two sets (30 items) in common, and the sixth and eighth grades had 15 items in common. In…

  10. Vertical reflector for bifacial PV-panels

    DEFF Research Database (Denmark)

    Jakobsen, Michael Linde; Thorsteinsson, Sune; Poulsen, Peter Behrensdorff

    2016-01-01

    Bifacial solar modules offer an interesting price/performance ratio, and much work has been focused on directing the ground albedo to the back of the solar cells. In this work we design and develop a reflector for a vertical bifacial panel, with the objective to optimize the energy harvest...

  11. On production costs in vertical differentiation models

    OpenAIRE

    Dorothée Brécard

    2009-01-01

    In this paper, we analyse the effects of the introduction of a unit production cost beside a fixed cost of quality improvement in a duopoly model of vertical product differentiation. Thanks to an original methodology, we show that a low unit cost tends to reduce product differentiation and thus prices, whereas a high unit cost leads to widen product differentiation and to increase prices

  12. MHD stability of vertically asymmetric tokamak equilibria

    International Nuclear Information System (INIS)

    Dalhed, H.E.; Grimm, R.C.; Johnson, J.L.

    1981-03-01

    The ideal MHD stability properties of a special class of vertically asymmetric tokamak equilibria are examined. The calculations confirm that no major new physical effects are introduced and the modifications can be understood by conventional arguments. The results indicate that significant departures from up-down symmetry can be tolerated before the reduction in β becomes important for reactor operation

  13. Optical anisotropy in vertically coupled quantum dots

    DEFF Research Database (Denmark)

    Yu, Ping; Langbein, Wolfgang Werner; Leosson, Kristjan

    1999-01-01

    We have studied the polarization of surface and edge-emitted photoluminescence (PL) from structures with vertically coupled In0.5Ga0.5As/GaAs quantum dots (QD's) grown by molecular beam epitaxy. The PL polarization is found to be strongly dependent on the number of stacked layers. While single...... number due to increasing dot size....

  14. Transient well flow in vertically heterogeneous aquifers.

    NARCIS (Netherlands)

    Hemker, C.J.

    1999-01-01

    A solution for the general problem of computing well flow in vertically heterogeneous aquifers is found by an integration of both analytical and numerical techniques. The radial component of flow is treated analytically; the drawdown is a continuous function of the distance to the well. The

  15. Proverbs : Probabilistic design tools for vertical breakwaters

    NARCIS (Netherlands)

    Oumeraci, H.; Allsop, N.W.H.; De Groot, M.B.; Crouch, R.S.; Vrijling, J.K.

    1999-01-01

    Final report and appendices of the European project Proverbs on tools for the design of vertical breakwaters (caisson type breakwaters) and similar hydraulic structures in the coastal zone. It includes the loads (waves) as well as the strength of the structure (geotechnial aspects, structural

  16. The capillary interaction between two vertical cylinders

    KAUST Repository

    Cooray, Himantha; Cicuta, Pietro; Vella, Dominic

    2012-01-01

    surface clusters. Here we present a numerical method for determining the three-dimensional meniscus around a pair of vertical circular cylinders. This involves the numerical solution of the fully nonlinear Laplace-Young equation using a mesh-free finite

  17. Manufacturing: the new case for vertical integration

    NARCIS (Netherlands)

    Kumpe, Ted; Bolwijn, Piet

    1988-01-01

    The article argues that the solid corporation will continue to view vertical integration as a critical part of manufacturing reform. Manufacturing reform and backward integration are related in insidious ways to the three stages of production over which the big manufacturers preside. Without

  18. Vertical integration as organizational strategy formation

    NARCIS (Netherlands)

    Romme, A.G.L.

    1990-01-01

    This paper contributes to research into the strategy—environment relationship, especially looking at the issue of vertical integration. It aims at a synthesis of process and content approaches to strategic change on the level of the organization’s dominant group. The key factor is uncertainty, which

  19. Vertical Integration: Teachers' Knowledge and Teachers' Voice.

    Science.gov (United States)

    Corrie, L.

    1995-01-01

    Traces the theoretical basis for vertical integration in early school years. Contrasts transmission-based pedagogy with a higher level of teacher control, and acquirer-based pedagogy with a higher level of student control. Suggests that early childhood pedagogy will be maintained when teachers are able to articulate their pedagogical knowledge and…

  20. Vertical integration of HRD policy within companies

    NARCIS (Netherlands)

    Wognum, Ida

    2001-01-01

    This study concerns HRD policy making in companies. More specifically, it explores whether so-called vertical integration of HRD policy at different organizational levels occurs within companies. The study involved forty-four large companies in the industrial and the financial and commercial

  1. A note on partial vertical integration

    NARCIS (Netherlands)

    G.W.J. Hendrikse (George); H.J.M. Peters (Hans)

    1989-01-01

    textabstractA simple model is constructed to show how partial vertical integration may emerge as an equilibrium market structure in a world characterized by rationing, differences in the reservation prices of buyers, and in the risk attitudes of buyers and sellers. The buyers with the high

  2. Vertical Integration Spurs American Health Care Revolution.

    Science.gov (United States)

    Phillips, Richard C.

    1986-01-01

    Under new "managed health care systems," the classical functional separation of risk taker, claims payor, and provider are vertically integrated into a common entity. This evolution should produce a competitive environment with medical care rendered to all Americans on a more cost-effective basis. (CJH)

  3. Oblique patterned etching of vertical silicon sidewalls

    Science.gov (United States)

    Bruce Burckel, D.; Finnegan, Patrick S.; David Henry, M.; Resnick, Paul J.; Jarecki, Robert L.

    2016-04-01

    A method for patterning on vertical silicon surfaces in high aspect ratio silicon topography is presented. A Faraday cage is used to direct energetic reactive ions obliquely through a patterned suspended membrane positioned over the topography. The technique is capable of forming high-fidelity pattern (100 nm) features, adding an additional fabrication capability to standard top-down fabrication approaches.

  4. Vertical Dynamic Stiffness of Offshore Foundations

    DEFF Research Database (Denmark)

    Latini, Chiara; Cisternino, Michele; Zania, Varvara

    2016-01-01

    Nowadays, pile and suction caisson foundations are widely used to support offshore structures which are subjected to vertical dynamic loads. The dynamic soil-structure interaction of floating foundations (foundations embedded in a soil layer whose height is greater than the foundation length) is ...

  5. Vertical pump with free floating check valve

    International Nuclear Information System (INIS)

    Lindsay, M.

    1980-01-01

    A vertical pump is described which has a bottom discharge with a free floating check valve disposed in the outlet plenum thereof. The free floating check valve comprises a spherical member with a hemispherical cage-like member attached thereto which is capable of allowing forward or reverse flow under appropriate conditions while preventing reverse flow under inappropriate conditions

  6. Vertical field and equilibrium calculation in ETE

    International Nuclear Information System (INIS)

    Montes, Antonio; Shibata, Carlos Shinya.

    1996-01-01

    The free-boundary MHD equilibrium code HEQ is used to study the plasma behaviour in the tokamak ETE, with optimized compensations coils and vertical field coils. The changes on the equilibrium parameters for different plasma current values are also investigated. (author). 5 refs., 4 figs., 2 tabs

  7. Abdome agudo em pós-operatório tardio de apendicite aguda: pode não ser bridas

    Directory of Open Access Journals (Sweden)

    Bruno Castro Fernandes

    2014-10-01

    Full Text Available As ressecções intestinais em países desenvolvidos ocorrem devido às malformações congênitas. Em países em desenvolvimento essas resseções ocorrem por causas potencialmente evitáveis, como invaginação intestinal irredutível, trauma abdominal fechado, volvo de jejuno-íleo, enterocolite necrosante, hérnia inguinal estrangulada e obstrução por bridas pós-operatórias. O volvo intestinal na infância é raro e geralmente de causas iatrogênicas causado, por exemplo, pela presença de grampos soltos a cavidade intestinal após apendicectomia laparoscópica. O volvo de jejuno-íleo pode ser secundário à isquemia nos casos de gastrosquise tratadas com silo ou mesmo pela colocação de banda gástrica pós-laparoscopia, ou ainda pela presença de lipoma mesentérico. Não foi identificado trabalho na literatura recente sobre volvo jejuno-íleo e isquemia e necrose de segmento de alça intestinal. O autores relatam um caso de abdome agudo obstrutivo em criança de 6 anos, em pós-operatório tardio (4 anos de apendicectomia aberta e cuja ressecção de segmento de Alça intestinal foi necessária nas duas oportunidades mas por motivos diferentes. Situações adversas em abdome agudo pós-operatório podem não ser por aderências intestinais, mas por situações mais graves e o cirurgião deve estar preparado para corrigir sua tática operatória.

  8. International EMS Systems

    DEFF Research Database (Denmark)

    Langhelle, Audun; Lossius, Hans Morten; Silfvast, Tom

    2004-01-01

    exist, however, especially within the ground and air ambulance service, and the EMS systems face several challenges. Main problems and challenges emphasized by the authors are: (1) Denmark: the dispatch centres are presently not under medical control and are without a national criteria based system......Emergency medicine service (EMS) systems in the five Nordic countries have more similarities than differences. One similarity is the involvement of anaesthesiologists as pre-hospital physicians and their strong participation for all critically ill and injured patients in-hospital. Discrepancies do....... Access to on-line medical advice of a physician is not available; (2) Finland: the autonomy of the individual municipalities and their responsibility to cover for primary and specialised health care, as well as the EMS, and the lack of supporting or demanding legislation regarding the EMS; (3) Iceland...

  9. A possible Echinococcus granulosus calcified cyst found in a medieval adult female from the churchyard of Santo Domingo de Silos (Prádena del Rincón, Madrid, Spain).

    Science.gov (United States)

    Monge Calleja, Álvaro M; Sarkic, Natasa; López, Jesus Herrerín; Antunes, Wilson D T; Pereira, Manuel F C; Matos, António Pedro Alves de; Santos, Ana Luísa

    2017-03-01

    Calcification, or mineralisation, can occur as part of a natural process, or by pathological processes. The purpose of this work is to examine an unidentified semi-spherical and perforate hollow mass, found near the pelvis of an adult female, dated 12th-13th century AD, exhumed of the Church of Santo Domingo de Silos (Prádena del Ricón, Madrid, Spain). The mass was examined by SEM and Energy Dispersive X-Ray Spectroscopy. These procedures revealed a heterogeneous inner surface with both smooth and irregular areas. A larger spherical and several smaller crescent-shaped perforations were noticed. X-ray microanalysis revealed the presence of the elements C, K, P, Ca, Al, Si, Fe, and Mg. The co-localisation of Ca and P suggests that they may be combined in a mineral matrix, likely formed in vivo. Other minerals probably came from the soil, although Fe could be related to the presence of blood. The macroscopic and microscopic appearances, chemical composition, and location of the calcified mass point to a possible hydatid cyst from Echinococcus granulosus, common in agricultural populations. This study used a suite of analytical techniques that are useful in the diagnosis of unknown calcified masses and can, therefore, be recommended for use in future analytical work. Copyright © 2017 Elsevier Inc. All rights reserved.

  10. Subsurface imaging by electrical and EM methods

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-01

    This report consists of 3 subjects. 1) Three dimensional inversion of resistivity data with topography : In this study, we developed a 3-D inversion method based on the finite element calculation of model responses, which can effectively accommodate the irregular topography. In solving the inverse problem, the iterative least-squares approach comprising the smoothness-constraints was taken along with the reciprocity approach in the calculation of Jacobian. Furthermore the Active Constraint Balancing, which has been recently developed by ourselves to enhance the resolving power of the inverse problem, was also employed. Since our new algorithm accounts for the topography in the inversion step, topography correction is not necessary as a preliminary processing and we can expect a more accurate image of the earth. 2) Electromagnetic responses due to a source in the borehole : The effects of borehole fluid and casing on the borehole EM responses should thoroughly be analyzed since they may affect the resultant image of the earth. In this study, we developed an accurate algorithm for calculating the EM responses containing the effects of borehole fluid and casing when a current-carrying ring is located on the borehole axis. An analytic expression for primary vertical magnetic field along the borehole axis was first formulated and the fast Fourier transform is to be applied to get the EM fields at any location in whole space. 3) High frequency electromagnetic impedance survey : At high frequencies the EM impedance becomes a function of the angle of incidence or the horizontal wavenumber, so the electrical properties cannot be readily extracted without first eliminating the effect of horizontal wavenumber on the impedance. For this purpose, this paper considers two independent methods for accurately determining the horizontal wavenumber, which in turn is used to correct the impedance data. The 'apparent' electrical properties derived from the corrected impedance

  11. A poliomielite em Sergipe

    Directory of Open Access Journals (Sweden)

    Hélio A. Oliveira

    1994-06-01

    Full Text Available Os autores apresentam estudo retrospectivo da poliomielite em Sergipe. Dividem o estudo em três períodos levando em consideração a taxa de notificação de casos positivos e enfatizam o período que vai de 1979 a 1989, pelo estudo de 159 casos consecutivos. As seguintes informações foram levantadas para cada caso: sexo, idade, procedência, estado vacinai anterior e evolução clínica. São também avaliadas a incidência anual, relação incidência/cobertura vacinai e distribuição geográfica. Tecem comentários sobre os surtos epidêmicos ocorridos em 1984 e 1986, sobre as alterações na circulação do poliovírus selvagem (P1 para P3 e sobre problemas relacionados à não aquisição de imunidade em crianças com esquema vacinal completo. Consideram a poliomielite controlada no Estado, mas enfatizam a necessidade de manutenção de Vigilância epidemiológica efetiva para todos os casos de paralisia aguda e flácida em menores de 14 anos de idade.

  12. EM type radioactive standards. Radioaktivni etalony EM

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    The standard contains technical specifications and conditions of production, testing, packing, transport and storage of EM type planar calibration standards containing radionuclides /sup 14/C, /sup 60/Co, /sup 90/Sr, /sup 137/Cs, /sup 147/Pm, /sup 204/Tl, /sup 239/Pu, /sup 241/Am and natural U. The terminology is explained, the related Czechoslovak standards and legal prescriptions given and amendments to these prescriptions presented.

  13. Modeling tides and vertical tidal mixing: A reality check

    International Nuclear Information System (INIS)

    Robertson, Robin

    2010-01-01

    Recently, there has been a great interest in the tidal contribution to vertical mixing in the ocean. In models, vertical mixing is estimated using parameterization of the sub-grid scale processes. Estimates of the vertical mixing varied widely depending on which vertical mixing parameterization was used. This study investigated the performance of ten different vertical mixing parameterizations in a terrain-following ocean model when simulating internal tides. The vertical mixing parameterization was found to have minor effects on the velocity fields at the tidal frequencies, but large effects on the estimates of vertical diffusivity of temperature. Although there was no definitive best performer for the vertical mixing parameterization, several parameterizations were eliminated based on comparison of the vertical diffusivity estimates with observations. The best performers were the new generic coefficients for the generic length scale schemes and Mellor-Yamada's 2.5 level closure scheme.

  14. Vertical Structure of Radiation-pressure-dominated Thin Disks: Link between Vertical Advection and Convective Stability

    International Nuclear Information System (INIS)

    Gong, Hong-Yu; Gu, Wei-Min

    2017-01-01

    In the classic picture of standard thin accretion disks, viscous heating is balanced by radiative cooling through the diffusion process, and the radiation-pressure-dominated inner disk suffers convective instability. However, recent simulations have shown that, owing to the magnetic buoyancy, the vertical advection process can significantly contribute to energy transport. In addition, in comparing the simulation results with the local convective stability criterion, no convective instability has been found. In this work, following on from simulations, we revisit the vertical structure of radiation-pressure-dominated thin disks and include the vertical advection process. Our study indicates a link between the additional energy transport and the convectively stable property. Thus, the vertical advection not only significantly contributes to the energy transport, but it also plays an important role in making the disk convectively stable. Our analyses may help to explain the discrepancy between classic theory and simulations on standard thin disks.

  15. vertical bar Vub vertical bar from exclusive semileptonic B→π decays

    International Nuclear Information System (INIS)

    Flynn, Jonathan M.; Nieves, Juan

    2007-01-01

    We use Omnes representations of the form factors f + and f 0 for exclusive semileptonic B→π decays, paying special attention to the treatment of the B* pole and its effect on f + . We apply them to combine experimental partial branching fraction information with theoretical calculations of both form factors to extract vertical bar V ub vertical bar. The precision we achieve is competitive with the inclusive determination and we do not find a significant discrepancy between our result, vertical bar V ub vertical bar=(3.90+/-0.32+/-0.18)x10 -3 , and the inclusive world average value (4.45+/-0.20+/-0.26)x10 -3 [Heavy Flavor Averaging Group (HFAG), hep-ex/0603003

  16. Vertical distribution of paracalanus crassirostris (copepoda, calanoidea: analysis by the general linear model

    Directory of Open Access Journals (Sweden)

    Ana Milstein

    1979-01-01

    Full Text Available The vertical distribution of each developmental stage of Paracalanus crassirostris was studied in a shallow water station at Ubatuba, SP, Brazil (23º30'S-45º07'W. Samples were collected monthly at the surface, 2m and near bottom levels . Salinity, temperature, dissolved oxygen, tide height, light penetration arid solar radiation were also recorded. Data were analysed by the general linear model. It showed that the amount of individuals at any developmental stage is affected diversely by hour, depth, hour-depth interaction and environmental factors throughout the year and that these effects are stronger in summer. All developmental stages were spread in the water column showing no regular vertical migrations. On the other hand, the number of organisms caught in a particular hour seemed to dependmore on the tide than on the animals behaviour. The results of the present paper showed, as observed by some other authors, the lack of vertical migration of a coastal copepod which is a grazer of fine particles throughout its life.A distribuição vertical dos diferentes estádios de desenvolvimento de P. crassirostris foi estudada durante um ano (junho 1976 - maio 1977, numa estação pouco profunda (5 m em Ubatuba. As amostras foram coletadas mensalmente, em tres profundidades, cada quatro horas, com garrafa van Dorn de 9 l registrando-se dados ambientais. Os dados foram processados com a técnica dos Mínimos Quadrados, na forma de uma Aralise de Regressão de um Modelo Linear que inclui covariáveis. O modelo foi construído a priori, considerando densidade de organismos por amostra, fatores ambientais, diferenças entre amostras procedentes de diferentes profundidades e horas, também como interações entre hora e profundidade. Para cada estádio de P. crassirostris, o modelo foi repetido 9 vezes, com os dados de dois meses cada vez, a fim de obter a variação das respostas no ano. Os resultados do modelo indicaram que a quantidade de indiv

  17. The Vertical Farm: A Review of Developments and Implications for the Vertical City

    Directory of Open Access Journals (Sweden)

    Kheir Al-Kodmany

    2018-02-01

    Full Text Available This paper discusses the emerging need for vertical farms by examining issues related to food security, urban population growth, farmland shortages, “food miles”, and associated greenhouse gas (GHG emissions. Urban planners and agricultural leaders have argued that cities will need to produce food internally to respond to demand by increasing population and to avoid paralyzing congestion, harmful pollution, and unaffordable food prices. The paper examines urban agriculture as a solution to these problems by merging food production and consumption in one place, with the vertical farm being suitable for urban areas where available land is limited and expensive. Luckily, recent advances in greenhouse technologies such as hydroponics, aeroponics, and aquaponics have provided a promising future to the vertical farm concept. These high-tech systems represent a paradigm shift in farming and food production and offer suitable and efficient methods for city farming by minimizing maintenance and maximizing yield. Upon reviewing these technologies and examining project prototypes, we find that these efforts may plant the seeds for the realization of the vertical farm. The paper, however, closes by speculating about the consequences, advantages, and disadvantages of the vertical farm’s implementation. Economic feasibility, codes, regulations, and a lack of expertise remain major obstacles in the path to implementing the vertical farm.

  18. Adaptation of the vertical vestibulo-ocular reflex in cats during low-frequency vertical rotation.

    Science.gov (United States)

    Fushiki, Hiroaki; Maruyama, Motoyoshi; Shojaku, Hideo

    2018-04-01

    We examined plastic changes in the vestibulo-ocular reflex (VOR) during low-frequency vertical head rotation, a condition under which otolith inputs from the vestibular system are essential for VOR generation. For adaptive conditioning of the vertical VOR, 0.02Hz sinusoidal pitch rotation for one hour about the earth's horizontal axis was synchronized with out-of-phase vertical visual stimulation from a random dot pattern. A vertical VOR was well evoked when the upright animal rotated around the earth-horizontal axis (EHA) at low frequency due to the changing gravity stimulus and dynamic stimulation of the otoliths. After adaptive conditioning, the amplitude of the vertical VOR increased by an average of 32.1%. Our observations showing plasticity in the otolithic contribution to the VOR may provide a new strategy for visual-vestibular mismatch training in patients with otolithic disorders. This low-frequency vertical head rotation protocol also provides a model for investigating the mechanisms underlying the adaptation of VORs mediated by otolith activation. Copyright © 2017 Elsevier B.V. All rights reserved.

  19. Evaluation of vertical coordinate and vertical mixing algorithms in the HYbrid-Coordinate Ocean Model (HYCOM)

    Science.gov (United States)

    Halliwell, George R.

    Vertical coordinate and vertical mixing algorithms included in the HYbrid Coordinate Ocean Model (HYCOM) are evaluated in low-resolution climatological simulations of the Atlantic Ocean. The hybrid vertical coordinates are isopycnic in the deep ocean interior, but smoothly transition to level (pressure) coordinates near the ocean surface, to sigma coordinates in shallow water regions, and back again to level coordinates in very shallow water. By comparing simulations to climatology, the best model performance is realized using hybrid coordinates in conjunction with one of the three available differential vertical mixing models: the nonlocal K-Profile Parameterization, the NASA GISS level 2 turbulence closure, and the Mellor-Yamada level 2.5 turbulence closure. Good performance is also achieved using the quasi-slab Price-Weller-Pinkel dynamical instability model. Differences among these simulations are too small relative to other errors and biases to identify the "best" vertical mixing model for low-resolution climate simulations. Model performance deteriorates slightly when the Kraus-Turner slab mixed layer model is used with hybrid coordinates. This deterioration is smallest when solar radiation penetrates beneath the mixed layer and when shear instability mixing is included. A simulation performed using isopycnic coordinates to emulate the Miami Isopycnic Coordinate Ocean Model (MICOM), which uses Kraus-Turner mixing without penetrating shortwave radiation and shear instability mixing, demonstrates that the advantages of switching from isopycnic to hybrid coordinates and including more sophisticated turbulence closures outweigh the negative numerical effects of maintaining hybrid vertical coordinates.

  20. Microstructure, vertical strain control and tunable functionalities in self-assembled, vertically aligned nanocomposite thin films

    International Nuclear Information System (INIS)

    Chen, Aiping; Bi, Zhenxing; Jia, Quanxi; MacManus-Driscoll, Judith L.; Wang, Haiyan

    2013-01-01

    Vertically aligned nanocomposite (VAN) oxide thin films have recently stimulated a significant amount of research interest owing to their novel architecture, vertical interfacial strain control and tunable material functionalities. In this work, the growth mechanisms of VAN thin films have been investigated by varying the composite material system, the ratio of the two constituent phases, and the thin film growth conditions including deposition temperature and oxygen pressure as well as growth rate. It has been shown that thermodynamic parameters, elastic and interfacial energies and the multiple phase ratio play dominant roles in the resulting microstructure. In addition, vertical interfacial strain has been observed in BiFeO 3 (BFO)- and La 0.7 Sr 0.3 MnO 3 (LSMO)-based VAN thin film systems; the vertical strain could be tuned by the growth parameters and selection of a suitable secondary phase. The tunability of physical properties such as dielectric loss in BFO:Sm 2 O 3 VAN and low-field magnetoresistance in LSMO-based VAN systems has been demonstrated. The enhancement and tunability of those physical properties have been attributed to the unique VAN architecture and vertical strain control. These results suggest that VAN architecture with novel microstructure and unique vertical strain tuning could provide a general route for tailoring and manipulating the functionalities of oxide thin films

  1. Conhecimento dos obstetras sobre a transmissão vertical da hepatite B Knowledge of obstetricians about the vertical transmission of hepatitis B virus

    Directory of Open Access Journals (Sweden)

    Joseni Santos da Conceição

    2009-03-01

    Full Text Available CONTEXTO: A transmissão vertical é responsável por 35% a 40% dos novos casos de hepatite B no mundo e a infecção precoce pelo vírus da hepatite B aumenta o risco de evolução para a hepatite crônica, cirrose e carcinoma hepatocelular. OBJETIVO: Determinar o conhecimento dos obstetras sobre as práticas para o diagnóstico da infecção pelo vírus da hepatite B em gestantes e as condutas para a prevenção desta infecção em recém-nascidos de mães infectadas. MÉTODOS: Foram sorteados aleatoriamente profissionais de saúde cadastrados na Sociedade de Obstetrícia e Ginecologia da Bahia, que foram convidados a responder um questionário anônimo com informações sobre sua formação acadêmica, o local de trabalho, o contato com estudantes e as suas práticas profissionais em relação ao vírus da hepatite B. Adotou-se como critério de exclusão o não exercício atual da obstetrícia e a não residência na Bahia. A análise dos dados foi feita através do programa estatístico Epiinfo e para análise das correlações foi adotado intervalo de confiança de 95%. RESULTADOS: Foram entrevistados 301 obstetras, dos quais 90,3% reconheciam a transmissibilidade vertical do vírus da hepatite B e 81,7% solicitavam algum exame para detecção de hepatite B durante o pré-natal de suas pacientes. Sessenta e seis por cento dos médicos entrevistados referiram o AgHBs como o marcador sorológico mais adequado para avaliar a presença de infecção pelo VHB. Apenas 13,0% destes profissionais indicavam de modo sistemático a vacina contra a hepatite B e a administração de imunoglobulina nas primeiras 12 horas de vida do recém-nascido de mães infectadas. O número de respostas corretas quanto à transmissibilidade vertical do VHB, ao marcador sorológico mais adequado e à conduta para o recém-nascido de mãe infectada foi maior entre os obstetras que possuíam o Título de Especialista em Ginecologia e Obstetrícia que entre os demais

  2. Ultimately short ballistic vertical graphene Josephson junctions

    Science.gov (United States)

    Lee, Gil-Ho; Kim, Sol; Jhi, Seung-Hoon; Lee, Hu-Jong

    2015-01-01

    Much efforts have been made for the realization of hybrid Josephson junctions incorporating various materials for the fundamental studies of exotic physical phenomena as well as the applications to superconducting quantum devices. Nonetheless, the efforts have been hindered by the diffusive nature of the conducting channels and interfaces. To overcome the obstacles, we vertically sandwiched a cleaved graphene monoatomic layer as the normal-conducting spacer between superconducting electrodes. The atomically thin single-crystalline graphene layer serves as an ultimately short conducting channel, with highly transparent interfaces with superconductors. In particular, we show the strong Josephson coupling reaching the theoretical limit, the convex-shaped temperature dependence of the Josephson critical current and the exceptionally skewed phase dependence of the Josephson current; all demonstrate the bona fide short and ballistic Josephson nature. This vertical stacking scheme for extremely thin transparent spacers would open a new pathway for exploring the exotic coherence phenomena occurring on an atomic scale. PMID:25635386

  3. New Urban Vertical Axis Wind Turbine Design

    Directory of Open Access Journals (Sweden)

    Alexandru-Mihai CISMILIANU

    2015-12-01

    Full Text Available This paper develops a different approach for enhancing the performance of Vertical Axis Wind Turbines for the use in the urban or rural environment and remote isolated residential areas. Recently the vertical axis wind turbines (VAWT have become more attractive due to the major advantages of this type of turbines in comparison to the horizontal axis wind turbines. We aim to enhance the overall performance of the VAWT by adding a second set of blades (3 x 2=6 blades following the rules of biplane airplanes. The model has been made to operate at a maximum power in the range of the TSR between 2 to 2.5. The performances of the VAWT were investigated numerically and experimentally and justify the new proposed design.

  4. Alignment analysis of a vertical sodium pump

    International Nuclear Information System (INIS)

    Gupta, V.K.; Fair, C.E.

    1981-01-01

    With the objective of identifying important alignment features of pumps such as FFTF, HALLAM, EBR II, PNC, PHENIX, and CRBR, alignment of the vertical sodium pump for the Clinch River Breeder Reactor Plant (CRBRP) is investigated. The CRBRP pump includes a flexibly coupled pump shaft and motor shaft, two oil-film tilting-pad hydrodynamic radial bearings in the motor plus a vertical thrust bearing, and two sodium hydrostatic bearings straddling the double-suction centrifugal impeller in the pump. The assembled CRBRP prototype pump shows smooth predictable vibration behavior experienced during water test. An ealier swing check of the pump shaft about the motor shaft hub demonstrated that the pump is relatively insensitive to manufacturing and assembly tolerances, a consequence of close dimensional control and unique alignment features. (orig./GL)

  5. Asymmetric SOL Current in Vertically Displaced Plasma

    Science.gov (United States)

    Cabrera, J. D.; Navratil, G. A.; Hanson, J. M.

    2017-10-01

    Experiments at the DIII-D tokamak demonstrate a non-monotonic relationship between measured scrape-off layer (SOL) currents and vertical displacement event (VDE) rates with SOL currents becoming largely n=1 dominant as plasma is displaced by the plasma control system (PCS) at faster rates. The DIII-D PCS is used to displace the magnetic axis 10x slower than the intrinsic growth time of similar instabilities in lower single-null plasmas. Low order (n VDE instabilities observed when vertical control is disabled. Previous inquiry shows VDE asymmetry characterized by SOL current fraction and geometric parameters of tokamak plasmas. We note that, of plasmas displaced by the PCS, short displacement time scales near the limit of the PCS temporal control appear to result in larger n=1/n=2 asymmetries. Work supported under USDOE Cooperative Agreement DE-FC02-04ER54698 and DE-FG02-04ER54761.

  6. Round beams generated by vertical dispersion

    International Nuclear Information System (INIS)

    Bagley, P.

    1990-01-01

    Simulations suggest that in e + e - storage rings collisions of round beams (equal emittances and equal β*) can produce very large tune shifts and luminosities. We understand how to make equal β*s, but generating equal emittances is more difficult. We describe an equal emittance scheme that uses several skew quads to couple horizontal dispersion into vertical dispersion. These skew quads also produce a coupling bump. At the interaction point and at other points outside the coupling bump, the motion is not coupled, so that the 'A' normal mode corresponds to horizontal motion and the 'B' normal mode corresponds to vertical motion. We present a round beam lattice for CESR that incorporates this scheme

  7. Equilibrium vertical field in the TBR Tokamak

    International Nuclear Information System (INIS)

    Ueta, A.Y.

    1985-01-01

    An experimental study on the influence of the vertical magnetic field of the TBR tokamak on the stability and equilibrium of plasma column, was done. Magnetic pick-up coils were built to measure plasma current and position, together with active networks, necessary fo the electronic processing of signals. Some measurements were on the space configuration of the vertical field, and on the influence due to the toroidal vessel. From the data obtained it was possible to discuss the influence of the currents induced on the vessel surface, on plasma equilibrium. Theoretical and experimental results of the vertica field, as a function of plasma current were compared, and allowed an evaluation of the plasma kinetic pressure and temperature. (Author) [pt

  8. High-Performance Vertical Organic Electrochemical Transistors.

    Science.gov (United States)

    Donahue, Mary J; Williamson, Adam; Strakosas, Xenofon; Friedlein, Jacob T; McLeod, Robert R; Gleskova, Helena; Malliaras, George G

    2018-02-01

    Organic electrochemical transistors (OECTs) are promising transducers for biointerfacing due to their high transconductance, biocompatibility, and availability in a variety of form factors. Most OECTs reported to date, however, utilize rather large channels, limiting the transistor performance and resulting in a low transistor density. This is typically a consequence of limitations associated with traditional fabrication methods and with 2D substrates. Here, the fabrication and characterization of OECTs with vertically stacked contacts, which overcome these limitations, is reported. The resulting vertical transistors exhibit a reduced footprint, increased intrinsic transconductance of up to 57 mS, and a geometry-normalized transconductance of 814 S m -1 . The fabrication process is straightforward and compatible with sensitive organic materials, and allows exceptional control over the transistor channel length. This novel 3D fabrication method is particularly suited for applications where high density is needed, such as in implantable devices. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  9. Soft soils reinforced by rigid vertical inclusions

    Directory of Open Access Journals (Sweden)

    Iulia-Victoria NEAGOE

    2013-12-01

    Full Text Available Reinforcement of soft soils by rigid vertical inclusions is an increasingly used technique over the last few years. The system consists of rigid or semi-rigid vertical inclusions and a granular platform for the loads transfer from the structure to the inclusions. This technique aims to reduce the differential settlements both at ground level as below the structure. Reinforcement by rigid inclusions is mainly used for foundation works for large commercial and industrial platforms, storage tanks, wastewater treatment plants, wind farms, bridges, roads, railway embankments. The subject is one of interest as it proves the recently concerns at international level in research and design; however, most studies deal more with the static behavior and less with the dynamic one.

  10. Interaction vertices in reduced string field theories

    International Nuclear Information System (INIS)

    Embacher, F.

    1989-01-01

    In contrast to previous expectations, covariant overlap vertices are not always suitable for gauge-covariant formulations of bosonic string field theory with a reduced supplementary field content. This is demonstrated for the version of the theory suggested by Neveu, Schwarz and West. The method to construct the interaction, as formulated by Neveu and West, fails at one level higher than these authors have considered. The condition for a general vertex to describe formally a local gauge-invariant interaction is derived. The solution for the action functional and the gauge transformation law is exhibited for all fields at once, to the first order in the coupling constant. However, all these vertices seem to be unphysical. 21 refs. (Author)

  11. Purification, Characterization and Antioxidant Activities <em>in Vitroem>> em>and <em>in Vivoem> of the Polysaccharides from <em>Boletus edulisem> Bull

    Directory of Open Access Journals (Sweden)

    Yijun Fan

    2012-07-01

    Full Text Available A water-soluble polysaccharide (BEBP was extracted from <em>Boletus edulis em>Bull using hot water extraction followed by ethanol precipitation. The polysaccharide BEBP was further purified by chromatography on a DEAE-cellulose column, giving three major polysaccharide fractions termed BEBP-1, BEBP-2 and BEBP-3. In the next experiment, the average molecular weight (Mw, IR and monosaccharide compositional analysis of the three polysaccharide fractions were determined. The evaluation of antioxidant activities both <em>in vitroem> and <em>in vivo em>suggested that BEBP-3 had good potential antioxidant activity, and should be explored as a novel potential antioxidant.

  12. Sulla presenza di <em>Sorex antinoriiem>, <em>Neomys anomalusem> (Insectivora, Soricidae e <em>Talpa caecaem> (Insectivora, Talpidae in Umbria

    Directory of Open Access Journals (Sweden)

    A.M. Paci

    2003-10-01

    Full Text Available Lo scopo del contributo è di fornire un aggiornamento sulla presenza del Toporagno del Vallese <em>Sorex antinoriiem>, del Toporagno acquatico di Miller <em>Neomys anomalusem> e della Talpa cieca <em>Talpa caecaem> in Umbria, dove le specie risultano accertate ormai da qualche anno. A tal fine sono stati rivisitati i reperti collezionati e la bibliografia conosciuta. Toporagno del Vallese: elevato di recente a livello di specie da Brünner et al. (2002, altrimenti considerato sottospecie del Toporagno comune (<em>S. araneus antinoriiem>. È conservato uno di tre crani incompleti (mancano mandibole ed incisivi superiori al momento prudenzialmente riferiti a <em>Sorex> cfr. <em>antinorii>, provenienti dall?Appennino umbro-marchigiano settentrionale (dintorni di Scalocchio - PG, 590 m. s.l.m. e determinati sulla base della pigmentazione rossa degli ipoconi del M1 e M2; Toporagno acquatico di Miller: tre crani (Breda in Paci e Romano op. cit. e un esemplare intero (Paci, ined. sono stati trovati a pochi chilometri di distanza gli uni dall?altro tra i comuni di Assisi e Valfabbrica, in ambienti mediocollinari limitrofi al Parco Regionale del M.te Subasio (Perugia. In provincia di Terni la specie viene segnalata da Isotti (op. cit. per i dintorni di Orvieto. Talpa cieca: sono noti una femmina e un maschio raccolti nel comune di Pietralunga (PG, rispettivamente in una conifereta a <em>Pinus nigraem> (m. 630 s.l.m. e nelle vicinanze di un bosco misto collinare a prevalenza di <em>Quercus cerrisem> (m. 640 s.l.m.. Recentemente un terzo individuo è stato rinvenuto nel comune di Sigillo (PG, all?interno del Parco Regionale di M.te Cucco, sul margine di una faggeta a 1100 m s.l.m. In entrambi i casi l?areale della specie è risultato parapatrico con quello di <em>Talpa europaeaem>.

  13. Electrically floating, near vertical incidence, skywave antenna

    Science.gov (United States)

    Anderson, Allen A.; Kaser, Timothy G.; Tremblay, Paul A.; Mays, Belva L.

    2014-07-08

    An Electrically Floating, Near Vertical Incidence, Skywave (NVIS) Antenna comprising an antenna element, a floating ground element, and a grounding element. At least part of said floating ground element is positioned between said antenna element and said grounding element. The antenna is separated from the floating ground element and the grounding element by one or more electrical insulators. The floating ground element is separated from said antenna and said grounding element by one or more electrical insulators.

  14. RADIALLY MAGNETIZED PROTOPLANETARY DISK: VERTICAL PROFILE

    International Nuclear Information System (INIS)

    Russo, Matthew; Thompson, Christopher

    2015-01-01

    This paper studies the response of a thin accretion disk to an external radial magnetic field. Our focus is on protoplanetary disks (PPDs), which are exposed during their later evolution to an intense, magnetized wind from the central star. A radial magnetic field is mixed into a thin surface layer, wound up by the disk shear, and pushed downward by a combination of turbulent mixing and ambipolar and ohmic drift. The toroidal field reaches much greater strengths than the seed vertical field that is usually invoked in PPD models, even becoming superthermal. Linear stability analysis indicates that the disk experiences the magnetorotational instability (MRI) at a higher magnetization than a vertically magnetized disk when both the effects of ambipolar and Hall drift are taken into account. Steady vertical profiles of density and magnetic field are obtained at several radii between 0.06 and 1 AU in response to a wind magnetic field B r ∼ (10 −4 –10 −2 )(r/ AU) −2 G. Careful attention is given to the radial and vertical ionization structure resulting from irradiation by stellar X-rays. The disk is more strongly magnetized closer to the star, where it can support a higher rate of mass transfer. As a result, the inner ∼1 AU of a PPD is found to evolve toward lower surface density. Mass transfer rates around 10 −8 M ⊙ yr −1 are obtained under conservative assumptions about the MRI-generated stress. The evolution of the disk and the implications for planet migration are investigated in the accompanying paper

  15. RADIALLY MAGNETIZED PROTOPLANETARY DISK: VERTICAL PROFILE

    Energy Technology Data Exchange (ETDEWEB)

    Russo, Matthew [Department of Physics, University of Toronto, 60 St. George St., Toronto, ON M5S 1A7 (Canada); Thompson, Christopher [Canadian Institute for Theoretical Astrophysics, 60 St. George St., Toronto, ON M5S 3H8 (Canada)

    2015-11-10

    This paper studies the response of a thin accretion disk to an external radial magnetic field. Our focus is on protoplanetary disks (PPDs), which are exposed during their later evolution to an intense, magnetized wind from the central star. A radial magnetic field is mixed into a thin surface layer, wound up by the disk shear, and pushed downward by a combination of turbulent mixing and ambipolar and ohmic drift. The toroidal field reaches much greater strengths than the seed vertical field that is usually invoked in PPD models, even becoming superthermal. Linear stability analysis indicates that the disk experiences the magnetorotational instability (MRI) at a higher magnetization than a vertically magnetized disk when both the effects of ambipolar and Hall drift are taken into account. Steady vertical profiles of density and magnetic field are obtained at several radii between 0.06 and 1 AU in response to a wind magnetic field B{sub r} ∼ (10{sup −4}–10{sup −2})(r/ AU){sup −2} G. Careful attention is given to the radial and vertical ionization structure resulting from irradiation by stellar X-rays. The disk is more strongly magnetized closer to the star, where it can support a higher rate of mass transfer. As a result, the inner ∼1 AU of a PPD is found to evolve toward lower surface density. Mass transfer rates around 10{sup −8} M{sub ⊙} yr{sup −1} are obtained under conservative assumptions about the MRI-generated stress. The evolution of the disk and the implications for planet migration are investigated in the accompanying paper.

  16. Assessing verticalization effects on urban safety perception

    OpenAIRE

    Lourenço, Ricardo Barros

    2017-01-01

    We describe an experiment with the modeling of urban verticalization effects on perceived safety scores as obtained with computer vision on Google Streetview data for New York City. Preliminary results suggests that for smaller buildings (between one and seven floors), perceived safety increases with building height, but that for high-rise buildings, perceived safety decreases with increased height. We also determined that while height contributing for this relation, other zonal aspects also ...

  17. Vertical Integration Versus Outsourcing in Industry Equilibrium

    OpenAIRE

    Bin Wang

    2006-01-01

    We study the determinants of the extent of in-house vertical integration and of outsourcing in foreign countries. Potential suppliers must make a relationship-specific investment in order to serve each prospective customer. Such investments are governed by imperfect contracts. A final-good producer can manufacture components for it, but the per-unit cost is higher than for specialized suppliers. We consider how the size of the cost differential, the trade costs of components, the relative cos...

  18. Vertical Integration in the Taiwan Aquaculture Industry

    OpenAIRE

    Tzong-Ru Lee (Jiun-Shen); Yi-Hsu; Cheng-Jen Lin; Kongkiti Phusavat; Nirote Sinnarong

    2011-01-01

    The study aims to improve the distribution channels in the Taiwan aquaculture industry through a better vertical integration. This study is derived from a need to improve the distribution performance of agricultural-based industries in response to increasing food demands in Asia and elsewhere. Based on a four-by-eight matrix derived from both a value chain and a service profit chain, thirty different strategies are developed. This development is based on key success factors and strategies for...

  19. Vertical integration technologies for vertex detectors

    International Nuclear Information System (INIS)

    Ratti, L.

    2011-01-01

    This work is focused on the use of vertical integration (3D) technologies in the design of hybrid or monolithic pixel detectors in view of applications to silicon vertex trackers (SVTs) at the future high luminosity colliders. After a short introduction on the specifications of next-generation SVTs, the paper will discuss the general features of 3D microelectronic processes and the benefits they can provide to the design of pixel detectors for high energy physics experiments.

  20. Vertical hydraulic transport of particulate solids

    International Nuclear Information System (INIS)

    Restini, C.V.; Massarani, G.

    1977-01-01

    The problem of particulate solid vertical transport is formulated using the conservation equations of Continuum Mechanics. It is shown that the constitutive equation for solid-fluid interaction term in the equations of motion may be determined by rather simple experiments of homogeneous fluidization. The predicted fluid pressure drop and solid concentration are in satisfacting agreement with past experiments and with data obtained in this work. (Author) [pt

  1. Data driven modelling of vertical atmospheric radiation

    International Nuclear Information System (INIS)

    Antoch, Jaromir; Hlubinka, Daniel

    2011-01-01

    In the Czech Hydrometeorological Institute (CHMI) there exists a unique set of meteorological measurements consisting of the values of vertical atmospheric levels of beta and gamma radiation. In this paper a stochastic data-driven model based on nonlinear regression and on nonhomogeneous Poisson process is suggested. In the first part of the paper, growth curves were used to establish an appropriate nonlinear regression model. For comparison we considered a nonhomogeneous Poisson process with its intensity based on growth curves. In the second part both approaches were applied to the real data and compared. Computational aspects are briefly discussed as well. The primary goal of this paper is to present an improved understanding of the distribution of environmental radiation as obtained from the measurements of the vertical radioactivity profiles by the radioactivity sonde system. - Highlights: → We model vertical atmospheric levels of beta and gamma radiation. → We suggest appropriate nonlinear regression model based on growth curves. → We compare nonlinear regression modelling with Poisson process based modeling. → We apply both models to the real data.

  2. Rotation of vertically oriented objects during earthquakes

    Science.gov (United States)

    Hinzen, Klaus-G.

    2012-10-01

    Vertically oriented objects, such as tombstones, monuments, columns, and stone lanterns, are often observed to shift and rotate during earthquake ground motion. Such observations are usually limited to the mesoseismal zone. Whether near-field rotational ground motion components are necessary in addition to pure translational movements to explain the observed rotations is an open question. We summarize rotation data from seven earthquakes between 1925 and 2009 and perform analog and numeric rotation testing with vertically oriented objects. The free-rocking motion of a marble block on a sliding table is disturbed by a pulse in the direction orthogonal to the rocking motion. When the impulse is sufficiently strong and occurs at the `right' moment, it induces significant rotation of the block. Numeric experiments of a free-rocking block show that the initiation of vertical block rotation by a cycloidal acceleration pulse applied orthogonal to the rocking axis depends on the amplitude of the pulse and its phase relation to the rocking cycle. Rotation occurs when the pulse acceleration exceeds the threshold necessary to provoke rocking of a resting block, and the rocking block approaches its equilibrium position. Experiments with blocks subjected to full 3D strong motion signals measured during the 2009 L'Aquila earthquake confirm the observations from the tests with analytic ground motions. Significant differences in the rotational behavior of a monolithic block and two stacked blocks exist.

  3. Human sensitivity to vertical self-motion.

    Science.gov (United States)

    Nesti, Alessandro; Barnett-Cowan, Michael; Macneilage, Paul R; Bülthoff, Heinrich H

    2014-01-01

    Perceiving vertical self-motion is crucial for maintaining balance as well as for controlling an aircraft. Whereas heave absolute thresholds have been exhaustively studied, little work has been done in investigating how vertical sensitivity depends on motion intensity (i.e., differential thresholds). Here we measure human sensitivity for 1-Hz sinusoidal accelerations for 10 participants in darkness. Absolute and differential thresholds are measured for upward and downward translations independently at 5 different peak amplitudes ranging from 0 to 2 m/s(2). Overall vertical differential thresholds are higher than horizontal differential thresholds found in the literature. Psychometric functions are fit in linear and logarithmic space, with goodness of fit being similar in both cases. Differential thresholds are higher for upward as compared to downward motion and increase with stimulus intensity following a trend best described by two power laws. The power laws' exponents of 0.60 and 0.42 for upward and downward motion, respectively, deviate from Weber's Law in that thresholds increase less than expected at high stimulus intensity. We speculate that increased sensitivity at high accelerations and greater sensitivity to downward than upward self-motion may reflect adaptations to avoid falling.

  4. Measurement of vertical stability metrics in KSTAR

    Science.gov (United States)

    Hahn, Sang-Hee; Humphreys, D. A.; Mueller, D.; Bak, J. G.; Eidietis, N. W.; Kim, H.-S.; Ko, J. S.; Walker, M. L.; Kstar Team

    2017-10-01

    The paper summarizes results of multi-year ITPA experiments regarding measurement of the vertical stabilization capability of KSTAR discharges, including most recent measurements at the highest achievable elongation (κ 2.0 - 2.1). The measurements of the open-loop growth rate of VDE (γz) and the maximum controllable vertical displacement (ΔZmax) are done by the release-and-catch method. The dynamics of the vertical movement of the plasma is verified by both relevant magnetic reconstructions and non-magnetic diagnostics. The measurements of γz and ΔZmax were done for different plasma currents, βp, internal inductances, elongations and different configurations of the vessel conductors that surround the plasma as the first wall. Effects of control design choice and diagnostics noise are discussed, and comparison with the axisymmetric plasma response model is given for partial accounting for the measured control capability. This work supported by Ministry of Science, ICT, and Future Planning under KSTAR project.

  5. Feedback control of vertical instability in TNS

    International Nuclear Information System (INIS)

    Frantz, E.R.

    1978-05-01

    Due to the unfavorable curvature of the vertical vacuum magnetic field, elongated plasmas are vertically unstable when the elongation, epsilon, becomes too large. The TNS (The Next Step) tokamak, as evolved in the Westinghouse-ORNL studies has an inside-D configuration (epsilon = 1.6, A = 5/1.25 = 4) characterized by an average decay index n approximately equal -0.75 at the plasma flux surface near the magnetic axis and is vertically unstable with a growth rate γ 0 approximately 10 5 sec -1 . Eddy currents produced in the vacuum vessel wall will slow this instability to growth rates γ 0 approximately 10 2 sec -1 provided there are no transverse insulating gaps in the vessel wall. A matrix equation has been developed for calculating the eddy currents induced in the EF coils and their stabilizing effect. Control theory for feedback systems with and without delay time is presented and possible plasma position detectors are discussed. For a plasma current of 6.1 MA, the controller peak power requirements using separate controller circuits are approximately 1 MW depending upon EF coil configurations and time delay. This feedback system is designed to stabilize a maximum plasma excursion of 10 cm from the midplane with delay times up to 2 sec

  6. TFTR vertically viewing electron cyclotron emission diagnostic

    International Nuclear Information System (INIS)

    Taylor, G.

    1990-01-01

    The Tokamak Fusion Test Reactor (TFTR) Michelson interferometer has a spectral coverage of 75--540 GHz, allowing measurement of the first four electron cyclotron harmonics. Until recently the instrument has been configured to view the TFTR plasma on the horizontal midplane, primarily in order to measure the electron temperature profile. Electron cyclotron emission (ECE) extraordinary mode spectra from TFTR Supershot plasmas exhibit a pronounced, spectrally narrow feature below the second harmonic. A similar feature is seen with the ECE radiometer diagnostic below the electron cyclotron fundamental frequency in the ordinary mode. Analysis of the ECE spectra indicates the possibility of a non-Maxwellian 40--80 keV tail on the electron distribution in or near the core. During 1990 three vertical views with silicon carbide viewing targets will be installed to provide a direct measurement of the electron energy distribution at major radii of 2.54, 2.78, and 3.09 m with an energy resolution of approximately 20% at 100 keV. To provide the maximum flexibility, the optical components for the vertical views will be remotely controlled to allow the Michelson interferometer to be reconfigured to either the midplane horizontal view or one of the three vertical views between plasma shots

  7. Vertical and horizontal seismometric observations of tides

    Science.gov (United States)

    Lambotte, S.; Rivera, L.; Hinderer, J.

    2006-01-01

    Tidal signals have been largely studied with gravimeters, strainmeters and tiltmeters, but can also be retrieved from digital records of the output of long-period seismometers, such as STS-1, particularly if they are properly isolated. Horizontal components are often noisier than the vertical ones, due to sensitivity to tilt at long periods. Hence, horizontal components are often disturbed by local effects such as topography, geology and cavity effects, which imply a strain-tilt coupling. We use series of data (duration larger than 1 month) from several permanent broadband seismological stations to examine these disturbances. We search a minimal set of observable signals (tilts, horizontal and vertical displacements, strains, gravity) necessary to reconstruct the seismological record. Such analysis gives a set of coefficients (per component for each studied station), which are stable over years and then can be used systematically to correct data from these disturbances without needing heavy numerical computation. A special attention is devoted to ocean loading for stations close to oceans (e.g. Matsushiro station in Japon (MAJO)), and to pressure correction when barometric data are available. Interesting observations are made for vertical seismometric components; in particular, we found a pressure admittance between pressure and data 10 times larger than for gravimeters for periods larger than 1 day, while this admittance reaches the usual value of -3.5 nm/s 2/mbar for periods below 3 h. This observation may be due to instrumental noise, but the exact mechanism is not yet understood.

  8. Algebraic motion of vertically displacing plasmas

    Science.gov (United States)

    Pfefferlé, D.; Bhattacharjee, A.

    2018-02-01

    The vertical motion of a tokamak plasma is analytically modelled during its non-linear phase by a free-moving current-carrying rod inductively coupled to a set of fixed conducting wires or a cylindrical conducting shell. The solutions capture the leading term in a Taylor expansion of the Green's function for the interaction between the plasma column and the surrounding vacuum vessel. The plasma shape and profiles are assumed not to vary during the vertical drifting phase such that the plasma column behaves as a rigid body. In the limit of perfectly conducting structures, the plasma is prevented to come in contact with the wall due to steep effective potential barriers created by the induced Eddy currents. Resistivity in the wall allows the equilibrium point to drift towards the vessel on the slow timescale of flux penetration. The initial exponential motion of the plasma, understood as a resistive vertical instability, is succeeded by a non-linear "sinking" behaviour shown to be algebraic and decelerating. The acceleration of the plasma column often observed in experiments is thus concluded to originate from an early sharing of toroidal current between the core, the halo plasma, and the wall or from the thermal quench dynamics precipitating loss of plasma current.

  9. Dynamic stiffness of suction caissons - vertical vibrations

    Energy Technology Data Exchange (ETDEWEB)

    Ibsen, Lars Bo; Liingaard, M.; Andersen, Lars

    2006-12-15

    The dynamic response of offshore wind turbines are affected by the properties of the foundation and the subsoil. The purpose of this report is to evaluate the dynamic soil-structure interaction of suction caissons for offshore wind turbines. The investigation is limited to a determination of the vertical dynamic stiffness of suction caissons. The soil surrounding the foundation is homogenous with linear viscoelastic properties. The dynamic stiffness of the suction caisson is expressed by dimensionless frequency-dependent dynamic stiffness coefficients corresponding to the vertical degree of freedom. The dynamic stiffness coefficients for the foundations are evaluated by means of a dynamic three-dimensional coupled Boundary Element/Finite Element model. Comparisons are made with known analytical and numerical solutions in order to evaluate the static and dynamic behaviour of the Boundary Element/Finite Element model. The vertical frequency dependent stiffness has been determined for different combinations of the skirt length, Poisson's ratio and the ratio between soil stiffness and skirt stiffness. Finally the dynamic behaviour at high frequencies is investigated. (au)

  10. Methyl 2-Benzamido-2-(1<em>H>-benzimidazol-1-ylmethoxyacetate

    Directory of Open Access Journals (Sweden)

    Alami Anouar

    2012-09-01

    Full Text Available The heterocyclic carboxylic α-aminoester methyl 2-benzamido-2-(1<em>H>-benzimidazol-1-ylmethoxyacetate is obtained by <em>O>-alkylation of methyl α-azido glycinate <em>N>-benzoylated with 1<em>H>-benzimidazol-1-ylmethanol.

  11. A specimen of <em>Sorex> cfr. <em>samniticus> in Barn Owl's pellets from Murge plateau (Apulia, Italy / Su di un <em>Sorex> cfr. <em>samniticus> (Insectivora, Soricidae rinvenuto in borre di <em>Tyto albaem> delle Murge (Puglia, Italia

    Directory of Open Access Journals (Sweden)

    Giovanni Ferrara

    1992-07-01

    Full Text Available Abstract In a lot of Barn Owl's pellets from the Murge plateau a specimen of <em>Sorex> sp. was detected. Thank to some morphological and morphometrical features, the cranial bones can be tentatively attributed to <em>Sorex samniticusem> Altobello, 1926. The genus <em>Sorex> was not yet included in the Apulia's fauna southwards of the Gargano district; the origin and significance of the above record is briefly discussed, the actual presence of a natural population of <em>Sorex> in the Murge being not yet proved. Riassunto Viene segnalato il rinvenimento di un esemplare di <em>Sorex> cfr. <em>samniticus> da borre di <em>Tyto albaem> delle Murge. Poiché il genere non era stato ancora segnalato nella Puglia a sud del Gargano, viene discusso il significato faunistico del reperto.

  12. Glycosylation of Vanillin and 8-Nordihydrocapsaicin by Cultured <em>Eucalyptus perrinianaem> Cells

    Directory of Open Access Journals (Sweden)

    Naoji Kubota

    2012-05-01

    Full Text Available Glycosylation of vanilloids such as vanillin and 8-nordihydrocapsaicin by cultured plant cells of <em>Eucalyptus perrinianaem> was studied. Vanillin was converted into vanillin 4-<em>O>-b-D-glucopyranoside, vanillyl alcohol, and 4-<em>O>-b-D-glucopyranosylvanillyl alcohol by <em>E. perriniana em>cells. Incubation of cultured <em>E. perrinianaem> cells with 8-nor- dihydrocapsaicin gave 8-nordihydrocapsaicin 4-<em>O>-b-D-glucopyranoside and 8-nordihydro- capsaicin 4-<em>O>-b-D-gentiobioside.

  13. Retratos em movimento.

    Directory of Open Access Journals (Sweden)

    Luiz Carlos Oliveira Junior

    Full Text Available resumo O artigo aborda aspectos da relação do cinema com a arte do retrato. Buscamos, em primeiro lugar, uma definição estética do que seria um retrato cinematográfico, sempre em tensão com os critérios formais e padrões estilísticos que historicamente constituíram o retrato pictórico. Em seguida, relacionamos essa questão com a importância que se deu à representação do close-up de rosto nas primeiras décadas do cinema, quando foi atribuído aos filmes um papel inédito no estudo da fisionomia e da expressão facial. Por fim, apresentamos exemplos de autorretratos na pintura e no cinema para expor a forma como a autorrepresentação põe em crise as noções de subjetividade e identidade em que a definição clássica do retrato se apoiava.

  14. Retrieving Vertical Air Motion and Raindrop Size Distributions from Vertically Pointing Doppler Radars

    Science.gov (United States)

    Williams, C. R.; Chandra, C. V.

    2017-12-01

    The vertical evolution of falling raindrops is a result of evaporation, breakup, and coalescence acting upon those raindrops. Computing these processes using vertically pointing radar observations is a two-step process. First, the raindrop size distribution (DSD) and vertical air motion need to be estimated throughout the rain shaft. Then, the changes in DSD properties need to be quantified as a function of height. The change in liquid water content is a measure of evaporation, and the change in raindrop number concentration and size are indicators of net breakup or coalescence in the vertical column. The DSD and air motion can be retrieved using observations from two vertically pointing radars operating side-by-side and at two different wavelengths. While both radars are observing the same raindrop distribution, they measure different reflectivity and radial velocities due to Rayleigh and Mie scattering properties. As long as raindrops with diameters greater than approximately 2 mm are in the radar pulse volumes, the Rayleigh and Mie scattering signatures are unique enough to estimate DSD parameters using radars operating at 3- and 35-GHz (Williams et al. 2016). Vertical decomposition diagrams (Williams 2016) are used to explore the processes acting on the raindrops. Specifically, changes in liquid water content with height quantify evaporation or accretion. When the raindrops are not evaporating, net raindrop breakup and coalescence are identified by changes in the total number of raindrops and changes in the DSD effective shape as the raindrops. This presentation will focus on describing the DSD and air motion retrieval method using vertical profiling radar observations from the Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) central facility in Northern Oklahoma.

  15. ostglacial rebound from VLBI Geodesy: On Establishing Vertical Reference

    Science.gov (United States)

    Argus, Donald .

    1996-01-01

    I propose that a useful reference frame for vertical motions is that found by minimizing differences between vertical motions observed with VLBI [Ma and Ryan, 1995] and predictions from postglacial rebound predictions [Peltier, 1995].

  16. Vertically aligned carbon nanotube field-effect transistors

    KAUST Repository

    Li, Jingqi; Zhao, Chao; Wang, Qingxiao; Zhang, Qiang; Wang, Zhihong; Zhang, Xixiang; Abutaha, Anas I.; Alshareef, Husam N.

    2012-01-01

    Vertically aligned carbon nanotube field-effect transistors (CNTFETs) have been developed using pure semiconducting carbon nanotubes. The source and drain were vertically stacked, separated by a dielectric, and the carbon nanotubes were placed

  17. Going Up? The Pros and Cons of Vertical Expansion.

    Science.gov (United States)

    Myler, Patricia A.; Boggs, Richard C.

    2002-01-01

    Describes the advantages and disadvantages of the vertical expansion of school buildings. Considers such factors as fire protection, compliance with the Americans with Disabilities Act, and cost. Discusses alternatives to vertical expansion. (PKP)

  18. Horizontalidade e verticalidade: os modelos de improvisação de Pixinguinha e K-Ximbinho no choro brasileiro Horizontal and vertical structures: Pixinguinha and K-Ximbinho's models of improvisation in the Brazilian Music

    Directory of Open Access Journals (Sweden)

    Paula Veneziano Valente

    2011-06-01

    Full Text Available Análise sobre os procedimentos de improvisação utilizados por Pixinguinha em 1 x 0 (1947 e por K-Ximbinho em Velhos Companheiros (1981. Uma comparação das diferenças e semelhanças entre suas abordagens mostra uma preferência pelos modelos estilísticos vertical ou horizontal.Analysis of the improvisation procedures of Brazilian instrumentalists Pixinguinha in 1 x 0 (One to zero; 1947 and K-Ximbinho in Velhos Companheiros (Old pals; 1981. A comparison of differences and similarities in their approaches reveals a preference for horizontal or vertical stylistic models.

  19. <em>In Vivoem> Histamine Optical Nanosensors

    Directory of Open Access Journals (Sweden)

    Heather A. Clark

    2012-08-01

    Full Text Available In this communication we discuss the development of ionophore based nanosensors for the detection and monitoring of histamine levels <em>in vivoem>. This approach is based on the use of an amine-reactive, broad spectrum ionophore which is capable of recognizing and binding to histamine. We pair this ionophore with our already established nanosensor platform, and demonstrate <em>in vitroem> and <em>in vivoem> monitoring of histamine levels. This approach enables capturing rapid kinetics of histamine after injection, which are more difficult to measure with standard approaches such as blood sampling, especially on small research models. The coupling together of <em>in vivoem> nanosensors with ionophores such as nonactin provide a way to generate nanosensors for novel targets without the difficult process of designing and synthesizing novel ionophores.

  20. Tolerances for the vertical emittance in damping rings

    International Nuclear Information System (INIS)

    Raubenheimer, T.O.

    1991-11-01

    Future damping rings for linear colliders will need to have very small vertical emittances. In the limit of low beam current, the vertical emittance is primarily determined by the vertical dispersion and the betatron coupling. In this paper, the contributions to these effects from random misalignments are calculated and tolerances are derived to limit the vertical emittance with a 95% confidence level. 10 refs., 5 figs

  1. The correction of occlusal vertical dimension on tooth wear

    Directory of Open Access Journals (Sweden)

    Rostiny Rostiny

    2007-12-01

    Full Text Available The loss of occlusal vertical dimension which is caused by tooth wear is necessarily treated to regain vertical dimension. Correctional therapy should be done as early possible. In this case, simple and relatively low cost therapy was performed. In unserve loss of occlusal vertical dimension, partial removable denture could be used and the improvement of lengthening anterior teeth using composite resin to improve to regain vertical dimensional occlusion.

  2. Vertical specialization and industrial upgrading: a preliminary note

    OpenAIRE

    Xiao Jiang; William Milberg

    2012-01-01

    Abstract Vertical specialization is a measure of the import content of exports. Given the widely recognized importance of trade in tasks and global production networks, vertical specialization has recently gained the attention of international trade researchers and policy makers. In this note, we use measured changes in the within-country pattern of vertical specialization to gauge the relevance of task trade for industrial upgrading and economic development. We first calculate vertical speci...

  3. Study of the <em>in Vitroem> Antiplasmodial, Antileishmanial and Antitrypanosomal Activities of Medicinal Plants from Saudi Arabia

    Directory of Open Access Journals (Sweden)

    Nawal M. Al-Musayeib

    2012-09-01

    Full Text Available The present study investigated the <em>in vitroem> antiprotozoal activity of sixteen selected medicinal plants. Plant materials were extracted with methanol and screened <em>in vitroem> against erythrocytic schizonts of <em>Plasmodium falciparumem>, intracellular amastigotes of <em>Leishmania infantum em>and <em>Trypanosoma cruzi em>and free trypomastigotes of<em> T. bruceiem>. Cytotoxic activity was determined against MRC-5 cells to assess selectivity<em>. em>The criterion for activity was an IC50 < 10 µg/mL (4. Antiplasmodial activity was found in the<em> em>extracts of<em> em>>Prosopis julifloraem> and <em>Punica granatumem>. Antileishmanial activity<em> em>against <em>L. infantumem> was demonstrated in <em>Caralluma sinaicaem> and <em>Periploca aphylla.em> Amastigotes of<em> T. cruzi em>were affected by the methanol extract of<em> em>>Albizia lebbeckem>> em>pericarp, <em>Caralluma sinaicaem>,> Periploca aphylla em>and <em>Prosopius julifloraem>. Activity against<em> T. brucei em>was obtained in<em> em>>Prosopis julifloraem>. Cytotoxicity (MRC-5 IC50 < 10 µg/mL and hence non-specific activities were observed for<em> em>>Conocarpus lancifoliusem>.>

  4. Analysis of vertical stability limits and vertical displacement event behavior on NSTX-U

    Science.gov (United States)

    Boyer, Mark; Battaglia, Devon; Gerhardt, Stefan; Menard, Jonathan; Mueller, Dennis; Myers, Clayton; Sabbagh, Steven; Smith, David

    2017-10-01

    The National Spherical Torus Experiment Upgrade (NSTX-U) completed its first run campaign in 2016, including commissioning a larger center-stack and three new tangentially aimed neutral beam sources. NSTX-U operates at increased aspect ratio due to the larger center-stack, making vertical stabilization more challenging. Since ST performance is improved at high elongation, improvements to the vertical control system were made, including use of multiple up-down-symmetric flux loop pairs for real-time estimation, and filtering to remove noise. Similar operating limits to those on NSTX (in terms of elongation and internal inductance) were achieved, now at higher aspect ratio. To better understand the observed limits and project to future operating points, a database of vertical displacement events and vertical oscillations observed during the plasma current ramp-up on NSTX/NSTX-U has been generated. Shots were clustered based on the characteristics of the VDEs/oscillations, and the plasma parameter regimes associated with the classes of behavior were studied. Results provide guidance for scenario development during ramp-up to avoid large oscillations at the time of diverting, and provide the means to assess stability of target scenarios for the next campaign. Results will also guide plans for improvements to the vertical control system. Work supported by U.S. D.O.E. Contract No. DE-AC02-09CH11466.

  5. 2D Vertical Heterostructures for Novel Tunneling Device Applications

    Science.gov (United States)

    2017-03-01

    2D Vertical Heterostructures for Novel Tunneling Device Applications Philip M. Campbell, Christopher J. Perini, W. Jud Ready, and Eric M. Vogel...School of Materials Science and Engineering Georgia Institute of Technology Atlanta, GA, USA 30332 Abstract: Vertical heterostructures...digital logic, signal processing, analog-to-digital conversion, and high-frequency communications, vertical heterostructure tunneling devices have

  6. Vertical vs. Horizontal Integration: Pre-emptive Merging.

    OpenAIRE

    Colangelo, Giuseppe

    1995-01-01

    Preemption plays a crucial role in arms merger decisions. The author studies whether and under which circumstances preemptive merging occurs in vertically related industries. He finds that vertical mergers often preempt horizontal mergers and are dominant outcomes. Preempting the threat of a detrimental horizontal integration may be the main reason for vertically integrating. Copyright 1995 by Blackwell Publishing Ltd.

  7. Mechanical design of NASA Ames Research Center vertical motion simulator

    Science.gov (United States)

    Engelbert, D. F.; Bakke, A. P.; Chargin, M. K.; Vallotton, W. C.

    1976-01-01

    NASA has designed and is constructing a new flight simulator with large vertical travel. Several aspects of the mechanical design of this Vertical Motion Simulator (VMS) are discussed, including the multiple rack and pinion vertical drive, a pneumatic equilibration system, and the friction-damped rigid link catenaries used as cable supports.

  8. Vertical selection in the information domain of children

    NARCIS (Netherlands)

    Duarte Torres, Sergio; Hiemstra, Djoerd; Huibers, Theo W.C.

    In this paper we explore the vertical selection methods in aggregated search in the specific domain of topics for children between 7 and 12 years old. A test collection consisting of 25 verticals, 3.8K queries and relevant assessments for a large sample of these queries mapping relevant verticals to

  9. Effect of vertical integration on the utilization of hardwood resources

    Science.gov (United States)

    Jan Wiedenbeck

    2002-01-01

    The effectiveness of vertical integration in promoting the efficient utilization of the hardwood resource in the eastern United States was assessed during a series of interviews with vertically integrated hardwood manufacturers in the Appalachian region. Data from 19 companies that responded to the 1996 phone survey indicate that: 1) vertically integrated hardwood...

  10. Simple suggestions for including vertical physics in oil spill models

    International Nuclear Information System (INIS)

    D'Asaro, Eric; University of Washington, Seatle, WA

    2001-01-01

    Current models of oil spills include no vertical physics. They neglect the effect of vertical water motions on the transport and concentration of floating oil. Some simple ways to introduce vertical physics are suggested here. The major suggestion is to routinely measure the density stratification of the upper ocean during oil spills in order to develop a database on the effect of stratification. (Author)

  11. ELECTRICAL MUSCLE STIMULATION (EMS IMPLEMENTATION IN EXPLOSIVE STRENGTH DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Zoran Đokić

    2013-07-01

    Full Text Available Electrical muscle stimulation (EMS, is also known as neuromuscular electrical stimulation (NMES may be used for therapeutic purposes and training. EMS is causing muscle contractions via electrical impulses. The survey was conducted as a case study. The study was conducted on subject of 3 male of different ages. The study lasted 4 weeks, and the respondents have not used any type of training or activity, which would affect the development of explosive strength of the lower extremities. Electrical stimulation was performed in the evening, every other day, with COMPEX mi sport apparatus (Medical SA - All rights reserved - 07/06 - Art. 885,616 - V.2 model. In 4 week period, a total of 13 treatments were performed on selected muscle groups - quadriceps femoris and gastrocnemius. Program of plyometric training (Plyometric (28 min per treatment, for each muscle group were applied. The main objective of this study was to quantify and compare explosive leg strength, using different vertical jump protocols, before and after the EMS program. The initial and final testing was conducted in the laboratory of the Faculty of Sport and Tourism in Novi Sad, on the contact plate AXON JUMP (Bioingeniería Deportiva, VACUMED, 4538 Westinghouse Street Ventura, CA 93 003 under identical conditions. In all three of the respondents indicated an increase in vertical jump in all applied protocols.

  12. Cyberbullying em adolescentes brasileiros

    OpenAIRE

    Wendt, Guilherme Welter

    2012-01-01

    O cyberbullying é entendido como uma forma de comportamento agressivo que ocorre através dos meios eletrônicos de interação (computadores, celulares, sites de relacionamento virtual), sendo realizado de maneira intencional por uma pessoa ou grupo contra alguém em situação desigual de poder e, ainda, com dificuldade em se defender. Os estudos disponíveis até o presente momento destacam que o cyberbullying é um fator de risco para o desenvolvimento de sintomas de ansiedade, depressão, ideação s...

  13. Nietzsche em voga

    OpenAIRE

    Borromeu, Carlos

    2015-01-01

    Resumo:Texto publicado em 1941, na revista de orientação católica A Ordem, no Rio de Janeiro. Seu autor considera que Nietzsche teria negado a moral tradicional, concebendo em seu lugar outra, porém imoral e brutal. Acusa o filósofo, por fim, de ser responsável pela Guerra ora e curso na Europa. Abstract:Text published in 1941 in the Catholic orientation magazine, A Ordem, in Rio de Janeiro. The author believes that Nietzsche would have denied traditional morality, conceiving another in it...

  14. Performance, intake and digestibility of feedlot lambs receiving elephant grass silage with different proportions of dried peel of passion fruitDesempenho, consumo e digestibilidade de cordeiros em confinamento recebendo silagens de capim elefante com diferentes proporções de casca desidratada de maracujá

    Directory of Open Access Journals (Sweden)

    Jefferson Bomfim Rocha

    2011-10-01

    Full Text Available The consumption, digestibility, and performance was evaluated of lambs fed silage elephant grass containing different inclusion levels of passion fruit peel dried (0, 10, 20 and 30% in natural matter of elephant grass, in a randomized completely randomized design with four replications. The elephant grass was cut at 60 days of age, chopped and ensiled in barrels along with the proportions of dried passion fruit peel, according to each treatment. After 30 days, the silos were opened for evaluation. It was observed that the inclusion of the residual affected the intake and digestibility of certain nutrients (PAvaliou-se o consumo, a digestibilidade, e o desempenho de silagens de capim-elefante, contendo diferentes níveis de inclusão (0; 10; 20 e 30% de casca de maracujá desidratada na matéria natural do capim-elefante, em um delineamento inteiramente casualizado, com 4 repetições. O capim elefante foi cortado com 60 dias de idade, picado e ensilado em tonéis juntamente com as proporções de casca de maracujá desidratada conforme cada tratamento. Após 30 dias de armazenagem os silos foram abertos para avaliações. Observou-se que a inclusão do resíduo influenciou o consumo e a digestibilidade de alguns nutrientes (P<0,05. Houve efeito para o ganho de peso médio diário e ganho total dos cordeiros, sendo que para cada 1% de casca de maracujá desidratada adicionada elevou-se 2,42% o GMD. A conversão alimentar apresentou efeito linear decrescente (8,9; 9,2; 8,6 e 7,2, respectivamente, entre os tratamentos, permitindo concluir que, a casca de maracujá desidratada pode ser utilizada em até 30% de inclusão ao capim-elefante.

  15. Transient well flow in vertically heterogeneous aquifers

    Science.gov (United States)

    Hemker, C. J.

    1999-11-01

    A solution for the general problem of computing well flow in vertically heterogeneous aquifers is found by an integration of both analytical and numerical techniques. The radial component of flow is treated analytically; the drawdown is a continuous function of the distance to the well. The finite-difference technique is used for the vertical flow component only. The aquifer is discretized in the vertical dimension and the heterogeneous aquifer is considered to be a layered (stratified) formation with a finite number of homogeneous sublayers, where each sublayer may have different properties. The transient part of the differential equation is solved with Stehfest's algorithm, a numerical inversion technique of the Laplace transform. The well is of constant discharge and penetrates one or more of the sublayers. The effect of wellbore storage on early drawdown data is taken into account. In this way drawdowns are found for a finite number of sublayers as a continuous function of radial distance to the well and of time since the pumping started. The model is verified by comparing results with published analytical and numerical solutions for well flow in homogeneous and heterogeneous, confined and unconfined aquifers. Instantaneous and delayed drainage of water from above the water table are considered, combined with the effects of partially penetrating and finite-diameter wells. The model is applied to demonstrate that the transient effects of wellbore storage in unconfined aquifers are less pronounced than previous numerical experiments suggest. Other applications of the presented solution technique are given for partially penetrating wells in heterogeneous formations, including a demonstration of the effect of decreasing specific storage values with depth in an otherwise homogeneous aquifer. The presented solution can be a powerful tool for the analysis of drawdown from pumping tests, because hydraulic properties of layered heterogeneous aquifer systems with

  16. Vertical Transport by Coastal Mesoscale Convective Systems

    Science.gov (United States)

    Lombardo, K.; Kading, T.

    2016-12-01

    This work is part of an ongoing investigation of coastal mesoscale convective systems (MCSs), including changes in vertical transport of boundary layer air by storms moving from inland to offshore. The density of a storm's cold pool versus that of the offshore marine atmospheric boundary layer (MABL), in part, determines the ability of the storm to successfully cross the coast, the mechanism driving storm propagation, and the ability of the storm to lift air from the boundary layer aloft. The ability of an MCS to overturn boundary layer air can be especially important over the eastern US seaboard, where warm season coastal MCSs are relatively common and where large coastal population centers generate concentrated regions of pollution. Recent work numerically simulating idealized MCSs in a coastal environment has provided some insight into the physical mechanisms governing MCS coastal crossing success and the impact on vertical transport of boundary layer air. Storms are simulated using a cloud resolving model initialized with atmospheric conditions representative of a Mid-Atlantic environment. Simulations are run in 2-D at 250 m horizontal resolution with a vertical resolution stretched from 100 m in the boundary layer to 250 m aloft. The left half of the 800 km domain is configured to represent land, while the right half is assigned as water. Sensitivity experiments are conducted to quantify the influence of varying MABL structure on MCS coastal crossing success and air transport, with MABL values representative of those observed over the western Mid-Atlantic during warm season. Preliminary results indicate that when the density of the cold pool is much greater than the MABL, the storm successfully crosses the coastline, with lifting of surface parcels, which ascend through the troposphere. When the density of the cold pool is similar to that of the MABL, parcels within the MABL remain at low levels, though parcels above the MABL ascend through the troposphere.

  17. Vertical deformation at western part of Sumatra

    Energy Technology Data Exchange (ETDEWEB)

    Febriyani, Caroline, E-mail: caroline.fanuel@students.itb.ac.id; Prijatna, Kosasih, E-mail: prijatna@gd.itb.ac.id; Meilano, Irwan, E-mail: irwan.meilano@gd.itb.ac.id

    2015-04-24

    This research tries to make advancement in GPS signal processing to estimate the interseismic vertical deformation field at western part of Sumatra Island. The data derived by Continuous Global Positioning System (CGPS) from Badan Informasi Geospasial (BIG) between 2010 and 2012. GPS Analyze at Massachusetts Institute of Technology (GAMIT) software and Global Kalman Filter (GLOBK) software are used to process the GPS signal to estimate the vertical velocities of the CGPS station. In order to minimize noise due to atmospheric delay, Vienna Mapping Function 1 (VMF1) is used as atmospheric parameter model and include daily IONEX file provided by the Center for Orbit Determination in Europe (CODE) as well. It improves GAMIT daily position accuracy up to 0.8 mm. In a second step of processing, the GLOBK is used in order to estimate site positions and velocities in the ITRF08 reference frame. The result shows that the uncertainties of estimated displacement velocity at all CGPS stations are smaller than 1.5 mm/yr. The subsided deformation patterns are seen at the northern and southern part of west Sumatra. The vertical deformation at northern part of west Sumatra indicates postseismic phase associated with the 2010 and 2012 Northern Sumatra earthquakes and also the long-term postseismic associated with the 2004 and 2005 Northern Sumatra earthquakes. The uplifted deformation patterns are seen from Bukit Tinggi to Seblat which indicate a long-term interseismic phase after the 2007 Bengkulu earthquake and 2010 Mentawai earthquake. GANO station shows a subsidence at rate 12.25 mm/yr, indicating the overriding Indo-Australia Plate which is dragged down by the subducting Southeast Asian Plate.

  18. Natural Products from Antarctic Colonial Ascidians of the Genera <em>Aplidium> and <em>Synoicum>: Variability and Defensive Role

    Directory of Open Access Journals (Sweden)

    Conxita Avila

    2012-08-01

    Full Text Available Ascidians have developed multiple defensive strategies mostly related to physical, nutritional or chemical properties of the tunic. One of such is chemical defense based on secondary metabolites. We analyzed a series of colonial Antarctic ascidians from deep-water collections belonging to the genera <em>Aplidium> and <em>Synoicum> to evaluate the incidence of organic deterrents and their variability. The ether fractions from 15 samples including specimens of the species <em>A.> <em>falklandicum>, <em>A.> <em>fuegiense>, <em>A.> <em>meridianum>, <em>A.> <em>millari> and <em>S.> <em>adareanum> were subjected to feeding assays towards two relevant sympatric predators: the starfish <em>Odontaster> <em>validus>, and the amphipod <em>Cheirimedon> <em>femoratus>. All samples revealed repellency. Nonetheless, some colonies concentrated defensive chemicals in internal body-regions rather than in the tunic. Four ascidian-derived meroterpenoids, rossinones B and the three derivatives 2,3-epoxy-rossinone B, 3-epi-rossinone B, 5,6-epoxy-rossinone B, and the indole alkaloids meridianins A–G, along with other minoritary meridianin compounds were isolated from several samples. Some purified metabolites were tested in feeding assays exhibiting potent unpalatabilities, thus revealing their role in predation avoidance. Ascidian extracts and purified compound-fractions were further assessed in antibacterial tests against a marine Antarctic bacterium. Only the meridianins showed inhibition activity, demonstrating a multifunctional defensive role. According to their occurrence in nature and within our colonial specimens, the possible origin of both types of metabolites is discussed.

  19. Opportunity's Surroundings on Sol 1818 (Vertical)

    Science.gov (United States)

    2009-01-01

    NASA's Mars Exploration Rover Opportunity used its navigation camera to take the images combined into this full-circle view of the rover's surroundings during the 1,818th Martian day, or sol, of Opportunity's surface mission (March 5, 2009). South is at the center; north at both ends. This view is presented as a vertical projection with geometric seam correction. North is at the top. The rover had driven 80.3 meters (263 feet) southward earlier on that sol. Tracks from the drive recede northward in this view. The terrain in this portion of Mars' Meridiani Planum region includes dark-toned sand ripples and lighter-toned bedrock.

  20. On triangle meshes with valence dominant vertices

    KAUST Repository

    Morvan, Jean-Marie

    2018-01-01

    We study triangulations $\\cal T$ defined on a closed disc $X$ satisfying the following condition: In the interior of $X$, the valence of all vertices of $\\cal T$ except one of them (the irregular vertex) is $6$. By using a flat singular Riemannian metric adapted to $\\cal T$, we prove a uniqueness theorem when the valence of the irregular vertex is not a multiple of $6$. Moreover, for a given integer $k >1$, we exhibit non isomorphic triangulations on $X$ with the same boundary, and with a unique irregular vertex whose valence is $6k$.

  1. Surface vertical deposition for gold nanoparticle film

    International Nuclear Information System (INIS)

    Diao, J J; Qiu, F S; Chen, G D; Reeves, M E

    2003-01-01

    In this rapid communication, we present the surface vertical deposition (SVD) method to synthesize the gold nanoparticle films. Under conditions where the surface of the gold nanoparticle suspension descends slowly by evaporation, the gold nanoparticles in the solid-liquid-gas junction of the suspension aggregate together on the substrate by the force of solid and liquid interface. When the surface properties of the substrate and colloidal nanoparticle suspension define for the SVD, the density of gold nanoparticles in the thin film made by SVD only depends on the descending velocity of the suspension surface and on the concentration of the gold nanoparticle suspension. (rapid communication)

  2. Biomineralization of superhydrophilic vertically aligned carbon nanotubes.

    Science.gov (United States)

    Marsi, Teresa Cristina O; Santos, Tiago G; Pacheco-Soares, Cristina; Corat, Evaldo J; Marciano, Fernanda R; Lobo, Anderson O

    2012-03-06

    Vertically aligned carbon nanotubes (VACNT) promise a great role for the study of tissue regeneration. In this paper, we introduce a new biomimetic mineralization routine employing superhydrophilic VACNT films as highly stable template materials. The biomineralization was obtained after VACNT soaking in simulated body fluid solution. Detailed structural analysis reveals that the polycrystalline biological apatites formed due to the -COOH terminations attached to VACNT tips after oxygen plasma etching. Our approach not only provides a novel route for nanostructured materials, but also suggests that COOH termination sites can play a significant role in biomimetic mineralization. These new nanocomposites are very promising as nanobiomaterials due to the excellent human osteoblast adhesion.

  3. On triangle meshes with valence dominant vertices

    KAUST Repository

    Morvan, Jean-Marie

    2018-02-16

    We study triangulations $\\\\cal T$ defined on a closed disc $X$ satisfying the following condition: In the interior of $X$, the valence of all vertices of $\\\\cal T$ except one of them (the irregular vertex) is $6$. By using a flat singular Riemannian metric adapted to $\\\\cal T$, we prove a uniqueness theorem when the valence of the irregular vertex is not a multiple of $6$. Moreover, for a given integer $k >1$, we exhibit non isomorphic triangulations on $X$ with the same boundary, and with a unique irregular vertex whose valence is $6k$.

  4. Vertically Polarized Omnidirectional Printed Slot Loop Antenna

    DEFF Research Database (Denmark)

    Kammersgaard, Nikolaj Peter Iversen; Kvist, Søren H.; Thaysen, Jesper

    2015-01-01

    A novel vertically polarized omnidirectional printed slot loop antenna has been designed, simulated, fabricated and measured. The slot loop works as a magnetic loop. The loop is loaded with inductors to insure uniform and in-phase fields in the slot in order to obtain an omnidirectional radiation...... pattern. The antenna is designed for the 2.45 GHz Industrial, Scientific and Medical band. Applications of the antenna are many. One is for on-body applications since it is ideal for launching a creeping waves due to the polarization....

  5. Vertical-Screw-Auger Conveyer Feeder

    Science.gov (United States)

    Walton, Otis (Inventor); Vollmer, Hubert J. (Inventor)

    2016-01-01

    A conical feeder is attached to a vertically conveying screw auger. The feeder is equipped with scoops and rotated from the surface to force-feed regolith the auger. Additional scoops are possible by adding a cylindrical section above the conical funnel section. Such then allows the unit to collect material from swaths larger in diameter than the enclosing casing pipe of the screw auger. A third element includes a flexible screw auger. All three can be used in combination in microgravity and zero atmosphere environments to drill and recover a wide area of subsurface regolith and entrained volatiles through a single access point on the surface.

  6. Vertical Cable Seismic Survey for Hydrothermal Deposit

    Science.gov (United States)

    Asakawa, E.; Murakami, F.; Sekino, Y.; Okamoto, T.; Ishikawa, K.; Tsukahara, H.; Shimura, T.

    2012-04-01

    The vertical cable seismic is one of the reflection seismic methods. It uses hydrophone arrays vertically moored from the seafloor to record acoustic waves generated by surface, deep-towed or ocean bottom sources. Analyzing the reflections from the sub-seabed, we could look into the subsurface structure. This type of survey is generally called VCS (Vertical Cable Seismic). Because VCS is an efficient high-resolution 3D seismic survey method for a spatially-bounded area, we proposed the method for the hydrothermal deposit survey tool development program that the Ministry of Education, Culture, Sports, Science and Technology (MEXT) started in 2009. We are now developing a VCS system, including not only data acquisition hardware but data processing and analysis technique. Our first experiment of VCS surveys has been carried out in Lake Biwa, JAPAN in November 2009 for a feasibility study. Prestack depth migration is applied to the 3D VCS data to obtain a high quality 3D depth volume. Based on the results from the feasibility study, we have developed two autonomous recording VCS systems. After we carried out a trial experiment in the actual ocean at a water depth of about 400m and we carried out the second VCS survey at Iheya Knoll with a deep-towed source. In this survey, we could establish the procedures for the deployment/recovery of the system and could examine the locations and the fluctuations of the vertical cables at a water depth of around 1000m. The acquired VCS data clearly shows the reflections from the sub-seafloor. Through the experiment, we could confirm that our VCS system works well even in the severe circumstances around the locations of seafloor hydrothermal deposits. We have, however, also confirmed that the uncertainty in the locations of the source and of the hydrophones could lower the quality of subsurface image. It is, therefore, strongly necessary to develop a total survey system that assures a accurate positioning and a deployment techniques

  7. Propulsion systems for vertical flight aircraft

    Energy Technology Data Exchange (ETDEWEB)

    Brooks, A.

    1990-01-01

    The present evaluation of VTOL airframe/powerplant integration configurations combining high forward flight speed with safe and efficient vertical flight identifies six configurations that can be matched with one of three powerplant types: turboshafts, convertible-driveshaft lift fans, and gas-drive lift fans. The airframes configurations are (1) tilt-rotor, (2) folded tilt-rotor, (3) tilt-wing, (4) rotor wing/disk wing, (5) lift fan, and (6) variable-diameter rotor. Attention is given to the lift-fan VTOL configuration. The evaluation of these configurations has been conducted by both a joint NASA/DARPA program and the NASA High Speed Rotorcraft program. 7 refs.

  8. Dissociation of Vertical Semiconductor Diatomic Artificial Molecules

    International Nuclear Information System (INIS)

    Pi, M.; Emperador, A.; Barranco, M.; Garcias, F.; Muraki, K.; Tarucha, S.; Austing, D. G.

    2001-01-01

    We investigate the dissociation of few-electron circular vertical semiconductor double quantum dot artificial molecules at 0T as a function of interdot distance. A slight mismatch introduced in the fabrication of the artificial molecules from nominally identical constituent quantum wells induces localization by offsetting the energy levels in the quantum dots by up to 2meV, and this plays a crucial role in the appearance of the addition energy spectra as a function of coupling strength particularly in the weak coupling limit

  9. Carbon export by vertically migrating zooplankton

    DEFF Research Database (Denmark)

    Hansen, Agnethe Nøhr; Visser, André W.

    2016-01-01

    Through diel vertical migration (DVM), zooplankton add an active transport to the otherwise passive sinking of detrital material that constitutes the biological pump. This active transport has proven difficult to quantify. We present a model that estimates both the temporal and depth characterist...... is transported than at either equatorial or boreal latitudes. We estimate that the amount of carbon transported below the mixed layer by migrating zooplankton in the North Atlantic Ocean constitutes 27% (16–30%) of the total export flux associated with the biological pump in that region...

  10. Diel vertical migration and distribution of zooplankton in a tropical Brazilian reservoirlian

    Directory of Open Access Journals (Sweden)

    Ana M. A. da Silva

    2009-08-01

    amostradas em quatro profundidades (Sub-superfície, 50% Io, 1% Io e Fundo em uma estação de amostragem com cinco metros de profundidade, em intervalos de quatro horas, ao longo de 24 horas. Duas espécies de Cladocera (Moina minuta e Diaphanosoma spinulosum e uma espécie de Copepoda (Notodiaptomus cearensis apresentaram padrões relativamente semelhantes de migração noturna, permanecendo no fundo durante o dia e se deslocando próximo à superfície no fim da tarde e ao longo da noite. Brachionus falcatus e Hexarthra mira (Rotifera não apresentaram padrões migratórios e as suas distribuições verticais foram relativamente homogêneas. As variáveis ambientais e as distribuições das espécies correlacionaram-se fracamente, sugerindo que outros mecanismos podem ser responsáveis por induzir a migração vertical.

  11. Vertical designs and agriculture joined for food production in the modules for urban vertical gardens.

    Directory of Open Access Journals (Sweden)

    Fritz Hammerling Navas Navarro

    2012-10-01

    Full Text Available Modules for Vertical Urban Gardens (MHUG are a hybrid of vertical gardens and urban agriculture. Vertical gardens have been recognized for the past 2500 years, mainly in the form of the Hanging Gardens of Babylon, while urban agriculture is being practiced today by more than 700 million people worldwide. The benefits that MHUV offers are multiple, but perhaps the most significant is the consumption of foods free of chemicals, free of GMO’s, irrigated with potable water, and that are 100% organic. It is presented a “culinary and medicinal module” that can be implemented in the kitchen area, on roofs, terraces, balconies or patios, where species such as thyme, mint, peppermint, parsley, lemon balm and rosemary can be at hand when preparing dishes. The module consists of three plastic baskets that are recyclable and resistant to decay. Each basket has four rows with space for fourteen seedlings. The baskets are first lined on the interior with a black geotextile, and then are covered with a mesh (polisombra which helps support the substrate and seedlings. Each basket rests on a structure made of recycled wood (from pallets or crates that both holds the basket vertically and serves as a rain cover. The cages measure 0.33m by 0.55m by 0.14m. Each module comes with hosing and connectors for a drip irrigation system, and an instructional manual. The modules demonstrate the benefits of urban agriculture combined with the beauty and modality of vertical gardens, leading to useful applications for food production and decoration in the spaces where vertical urban gardens are possible.

  12. Role of the vertical pressure gradient in wave boundary layers

    DEFF Research Database (Denmark)

    Jensen, Karsten Lindegård; Sumer, B. Mutlu; Vittori, Giovanna

    2014-01-01

    By direct numerical simulation (DNS) of the flow in an oscillatory boundary layer, it is possible to obtain the pressure field. From the latter, the vertical pressure gradient is determined. Turbulent spots are detected by a criterion involving the vertical pressure gradient. The vertical pressure...... gradient is also treated as any other turbulence quantity like velocity fluctuations and statistical properties of the vertical pressure gradient are calculated from the DNS data. The presence of a vertical pressure gradient in the near bed region has significant implications for sediment transport....

  13. Expected sliding distance of vertical slit caisson breakwater

    Science.gov (United States)

    Kim, Dong Hyawn

    2017-06-01

    Evaluating the expected sliding distance of a vertical slit caisson breakwater is proposed. Time history for the wave load to a vertical slit caisson is made. It consists of two impulsive wave pressures followed by a smooth sinusoidal pressure. In the numerical analysis, the sliding distance for an attack of single wave was shown and the expected sliding distance during 50 years was also presented. Those results were compared with a vertical front caisson breakwater without slit. It was concluded that the sliding distance of a vertical slit caisson may be over-estimated if the wave pressure on the caisson is evaluated without considering vertical slit.

  14. Processing vertical size disparities in distinct depth planes.

    Science.gov (United States)

    Duke, Philip A; Howard, Ian P

    2012-08-17

    A textured surface appears slanted about a vertical axis when the image in one eye is horizontally enlarged relative to the image in the other eye. The surface appears slanted in the opposite direction when the same image is vertically enlarged. Two superimposed textured surfaces with different horizontal size disparities appear as two surfaces that differ in slant. Superimposed textured surfaces with equal and opposite vertical size disparities appear as a single frontal surface. The vertical disparities are averaged. We investigated whether vertical size disparities are averaged across two superimposed textured surfaces in different depth planes or whether they induce distinct slants in the two depth planes. In Experiment 1, two superimposed textured surfaces with different vertical size disparities were presented in two depth planes defined by horizontal disparity. The surfaces induced distinct slants when the horizontal disparity was more than ±5 arcmin. Thus, vertical size disparities are not averaged over surfaces with different horizontal disparities. In Experiment 2 we confirmed that vertical size disparities are processed in surfaces away from the horopter, so the results of Experiment 1 cannot be explained by the processing of vertical size disparities in a fixated surface only. Together, these results show that vertical size disparities are processed separately in distinct depth planes. The results also suggest that vertical size disparities are not used to register slant globally by their effect on the registration of binocular direction of gaze.

  15. Vertical Slot Convection: A linear study

    International Nuclear Information System (INIS)

    McAllister, A.; Steinolfson, R.; Tajima, T.

    1992-11-01

    The linear stability properties of fluid convection in a vertical slot were studied. We use a Fourier-Chebychev decomposition was used to set up the linear eigenvalue problems for the Vertical Slot Convection and Benard problems. The eigenvalues, neutral stability curves, and critical point values of the Grashof number, G, and the wavenumber were determined. Plots of the real and imaginary parts of the eigenvalues as functions of G and α are given for a wide range of the Prandtl number, Pr, and special note is made of the complex mode that becomes linearly unstable above Pr ∼ 12.5. A discussion comparing different special cases facilitates the physical understanding of the VSC equations, especially the interaction of the shear-flow and buoyancy induced physics. Making use of the real and imaginary eigenvalues and the phase properties of the eigenmodes, the eigenmodes were characterized. One finds that the mode structure becomes progressively simpler with increasing Pr, with the greatest complexity in the mid ranges where the terms in the heat equation are of roughly the same size

  16. Effective solidity in vertical axis wind turbines

    Science.gov (United States)

    Parker, Colin M.; Leftwich, Megan C.

    2016-11-01

    The flow surrounding vertical axis wind turbines (VAWTs) is investigated using particle imaging velocimetry (PIV). This is done in a low-speed wind tunnel with a scale model that closely matches geometric and dynamic properties tip-speed ratio and Reynolds number of a full size turbine. Previous results have shown a strong dependance on the tip-speed ratio on the wake structure of the spinning turbine. However, it is not clear whether this is a speed or solidity effect. To determine this, we have measured the wakes of three turbines with different chord-to-diameter ratios, and a solid cylinder. The flow is visualized at the horizontal mid-plane as well as the vertical mid-plane behind the turbine. The results are both ensemble averaged and phase averaged by syncing the PIV system with the rotation of the turbine. By keeping the Reynolds number constant with both chord and diameter, we can determine how each effects the wake structure. As these parameters are varied there are distinct changes in the mean flow of the wake. Additionally, by looking at the vorticity in the phase averaged profiles we can see structural changes to the overall wake pattern.

  17. The capillary interaction between two vertical cylinders

    KAUST Repository

    Cooray, Himantha

    2012-06-27

    Particles floating at the surface of a liquid generally deform the liquid surface. Minimizing the energetic cost of these deformations results in an inter-particle force which is usually attractive and causes floating particles to aggregate and form surface clusters. Here we present a numerical method for determining the three-dimensional meniscus around a pair of vertical circular cylinders. This involves the numerical solution of the fully nonlinear Laplace-Young equation using a mesh-free finite difference method. Inter-particle force-separation curves for pairs of vertical cylinders are then calculated for different radii and contact angles. These results are compared with previously published asymptotic and experimental results. For large inter-particle separations and conditions such that the meniscus slope remains small everywhere, good agreement is found between all three approaches (numerical, asymptotic and experimental). This is as expected since the asymptotic results were derived using the linearized Laplace-Young equation. For steeper menisci and smaller inter-particle separations, however, the numerical simulation resolves discrepancies between existing asymptotic and experimental results, demonstrating that this discrepancy was due to the nonlinearity of the Laplace-Young equation. © 2012 IOP Publishing Ltd.

  18. Control of the vertical instability in tokamaks

    International Nuclear Information System (INIS)

    Lazarus, E.A.; Lister, J.B.; Neilson, G.H.

    1989-05-01

    The problem of control of the vertical instability is formulated for a massless filamentary plasma. The massless approximation is justified by an examination of the role of inertia in the control problem. The system is solved using Laplace transform techniques. The linear system is studied to determine the stability boundaries. It is found that the system can be stabilized up to a critical decay index, which is predominantly a function of the geometry of the passive stabilizing shell. A second, smaller critical index, which is a function of the geometry of the control coils, determines the limit of stability in the absence of derivative gain in the control circuit. The system is also studied numerically in order to incorporate the non-linear effects of power supply dynamics. The power supply bandwidth requirement is determined by the open-loop growth rate of the instability. The system is studied for a number of control coil options which are available on the DIII-D tokamak. It is found that many of the coils will not provide adequate stabilization and that the use of inboard coils is advantageous in stabilizing the system up to the critical index. Experiments carried out on DIII-D confirm the appropriateness of the model. Using the results of the model study, we have stabilized DIII-D plasmas with decay indices up to 98% of the critical index. Measurement of the plasma vertical position is also discussed. (author) 27 figs., 6 refs

  19. Algebraic motion of vertically displacing plasmas

    Science.gov (United States)

    Bhattacharjee, Amitava; Pfefferle, David; Hirvijoki, Eero

    2017-10-01

    The vertical displacement of tokamak plasmas is modelled during the non-linear phase by a free-moving current-carrying rod coupled to a set of fixed conducting wires and a cylindrical conducting shell. The models capture the leading term in a Taylor expansion of the Green's function for the interaction between the plasma column and the vacuum vessel. The plasma is assumed not to vary during the VDE such that it behaves as a rigid body. In the limit of perfectly conducting structures, the plasma is prevented from coming in contact with the wall due to steep effective potential barriers by the eddy currents, and will hence oscillate at Alfvénic frequencies about a given force-free position. In addition to damping oscillations, resistivity allows for the column to drift towards the vessel on slow flux penetration timescales. The initial exponential motion of the plasma, i.e. the resistive vertical instability, is succeeded by a non-linear sinking behaviour, that is shown analytically to be algebraic and decelerative. The acceleration of the plasma column often observed in experiments is thus conjectured to originate from an early sharing of toroidal current between the core, the halo plasma and the wall or from the thermal quench dynamics precipitating loss of plasma current

  20. Elastic kirchhoff migration for vertical seismic profiles

    International Nuclear Information System (INIS)

    Keho, T.H.; Wu, R.S.

    1987-01-01

    Elastic Kirchhoff migration is implemented for the VSP recording geometry. The resulting migration formula requires measurement of the stress as well as the displacement. Since stress is not measured in a VSP, and in many cases the horizontal component of displacement is not measured, approximate migration formulas are given for these cases. The elastic migration formula for the case where only the vertical components are available, is the same as the acoustic migration formula, where the pressure data are replaced by the magnitudes of the elastic data as reconstructed from the vertical components, and the acoustic Green's functions are replaced with either the P or S wave elastic Green's functions. Two expressions for migration of two component displacement data are presented. In the first, the terms involving traction data are simply ignored. In the second, an improved backpropagation operator for the displacement field is obtained by replacing the traction data in the Kirchhoff integral by displacement data using Hooke's law. The migration expressions for the cases where two component data are available produce images which are less contaminated by artifacts than the migration images of one component data

  1. Vertical profile of 137Cs in soil.

    Science.gov (United States)

    Krstić, D; Nikezić, D; Stevanović, N; Jelić, M

    2004-12-01

    In this paper, a vertical distribution of 137Cs in undisturbed soil was investigated experimentally and theoretically. Soil samples were taken from the surroundings of the city of Kragujevac in central Serbia during spring-summer of 2001. The sampling locations were chosen in such a way that the influence of soil characteristics on depth distribution of 137Cs in soil could be investigated. Activity of 137Cs in soil samples was measured using a HpGe detector and multi-channel analyzer. Based on vertical distribution of 137Cs in soil which was measured for each of 10 locations, the diffusion coefficient of 137Cs in soil was determined. In the next half-century, 137Cs will remain as the source of the exposure. Fifteen years after the Chernobyl accident, and more than 30 years after nuclear probes, the largest activity of 137Cs is still within 10 cm of the upper layer of the soil. This result confirms that the penetration of 137Cs in soil is a very slow process. Experimental results were compared with two different Green functions and no major differences were found between them. While both functions fit experimental data well in the upper layer of soil, the fitting is not so good in deeper layers. Although the curves obtained by these two functions are very close to each other, there are some differences in the values of parameters acquired by them.

  2. High-performance vertical organic transistors.

    Science.gov (United States)

    Kleemann, Hans; Günther, Alrun A; Leo, Karl; Lüssem, Björn

    2013-11-11

    Vertical organic thin-film transistors (VOTFTs) are promising devices to overcome the transconductance and cut-off frequency restrictions of horizontal organic thin-film transistors. The basic physical mechanisms of VOTFT operation, however, are not well understood and VOTFTs often require complex patterning techniques using self-assembly processes which impedes a future large-area production. In this contribution, high-performance vertical organic transistors comprising pentacene for p-type operation and C60 for n-type operation are presented. The static current-voltage behavior as well as the fundamental scaling laws of such transistors are studied, disclosing a remarkable transistor operation with a behavior limited by injection of charge carriers. The transistors are manufactured by photolithography, in contrast to other VOTFT concepts using self-assembled source electrodes. Fluorinated photoresist and solvent compounds allow for photolithographical patterning directly and strongly onto the organic materials, simplifying the fabrication protocol and making VOTFTs a prospective candidate for future high-performance applications of organic transistors. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. Vertical transmission of macular telangiectasia type 2.

    Science.gov (United States)

    Delaere, Lien; Spielberg, Leigh; Leys, Anita M

    2012-01-01

    The purpose of this study was to report vertical transmission of macular telangiectasia type 2 and type 2 diabetes mellitus in 3 families. In this retrospective interventional case series, the charts of patients with inherited macular telangiectasia type 2 were reviewed. A large spectrum of presentations of macular telangiectasia type 2 was observed and has been studied with different techniques including best-corrected visual acuity, microperimetry, confocal blue reflectance fundus autofluorescence, fluorescein angiography, and time domain and spectral domain optical coherence tomography. Vertical transmission of macular telangiectasia type 2 and associated type 2 diabetes mellitus is described in 3 families. Symptomatic as well as asymptomatic eyes with macular telangiectasia type 2 were identified. In 2 families, a mother and son experienced visual loss and were diagnosed with macular telangiectasia type 2. All 4 patients had type 2 diabetes. Diabetic retinopathy was observed in one mother and her son. In the third family, the index patient was diagnosed macular telangiectasia type 2 after complaints of metamorphopsia. She and her family members had type 2 diabetes mellitus, and further screening of her family revealed familial macular telangiectasia type 2. None of the patients were treated for macular telangiectasia type 2. Macular telangiectasia type 2 may be more common than previously assumed, as vision can remain preserved and patients may go undiagnosed. Screening of family members is indicated, and detection of mild anomalies is possible using fundus autofluorescence and spectral domain optical coherence tomography.

  4. Fusion reactor horizontal versus vertical maintenance approach

    International Nuclear Information System (INIS)

    Charruyer, Ph.; Djerassi, H.; Leger, D.; Maupou, M.; Rouillard, J.; Salpietro, E.; Holloway, C.; Suppan, A.

    1987-01-01

    This paper concerns the comparison of horizontal versus vertical maintenance options of internal components (blanket and segment) of fusion reactors NET (Next European Torus) and INTOR Design. The described mechanical options are taken to ensure the handling of internals with the required precision, taking into account the problems raised by the safety and confinement requirements. Handling is obviously performed remotely. The option comparisons are performed according to the criteria of feasibility, building size, duration of maintenance operations, safety, flexibility, availability and cost. The first conclusions point on that the vertical handling option offers advantages, as regards the ease of handling and confinement possibilities. From the building size point of view, the two solutions are almost equivalent, while other criteria do not provide a basis for choice. It is emphasized that the confinement option C.T.U. (Containment Transfer Unit) or T.I.C. (Tight Intermediate Confinement) should be the major factor in determining the best options. In additions, a cost comparative analysis emphasizes the best cost/benefit ratio for the different options studied

  5. Determinants of Arbovirus Vertical Transmission in Mosquitoes.

    Directory of Open Access Journals (Sweden)

    Sebastian Lequime

    2016-05-01

    Full Text Available Vertical transmission (VT and horizontal transmission (HT of pathogens refer to parental and non-parental chains of host-to-host transmission. Combining HT with VT enlarges considerably the range of ecological conditions in which a pathogen can persist, but the factors governing the relative frequency of each transmission mode are poorly understood for pathogens with mixed-mode transmission. Elucidating these factors is particularly important for understanding the epidemiology of arthropod-borne viruses (arboviruses of public health significance. Arboviruses are primarily maintained by HT between arthropod vectors and vertebrate hosts in nature, but are occasionally transmitted vertically in the vector population from an infected female to her offspring, which is a proposed maintenance mechanism during adverse conditions for HT. Here, we review over a century of published primary literature on natural and experimental VT, which we previously assembled into large databases, to identify biological factors associated with the efficiency of arbovirus VT in mosquito vectors. Using a robust statistical framework, we highlight a suite of environmental, taxonomic, and physiological predictors of arbovirus VT. These novel insights contribute to refine our understanding of strategies employed by arboviruses to persist in the environment and cause substantial public health concern. They also provide hypotheses on the biological processes underlying the relative VT frequency for pathogens with mixed-mode transmission that can be tested empirically.

  6. Clinical Relevance of <em>CDH1em> and <em>CDH13em> DNA-Methylation in Serum of Cervical Cancer Patients

    Directory of Open Access Journals (Sweden)

    Günther K. Bonn

    2012-07-01

    Full Text Available This study was designed to investigate the DNA-methylation status of <em>E>-cadherin (<em>CDH1em> and <em>H>-cadherin (<em>CDH13em> in serum samples of cervical cancer patients and control patients with no malignant diseases and to evaluate the clinical utility of these markers. DNA-methylation status of <em>CDH1em> and <em>CDH13em> was analyzed by means of MethyLight-technology in serum samples from 49 cervical cancer patients and 40 patients with diseases other than cancer. To compare this methylation analysis with another technique, we analyzed the samples with a denaturing high performance liquid chromatography (DHPLC PCR-method. The specificity and sensitivity of <em>CDH1em> DNA-methylation measured by MethyLight was 75% and 55%, and for <em>CDH13em> DNA-methylation 95% and 10%. We identified a specificity of 92.5% and a sensitivity of only 27% for the <em>CDH1em> DHPLC-PCR analysis. Multivariate analysis showed that serum <em>CDH1em> methylation-positive patients had a 7.8-fold risk for death (95% CI: 2.2–27.7; <em>p> = 0.001 and a 92.8-fold risk for relapse (95% CI: 3.9–2207.1; <em>p> = 0.005. We concluded that the serological detection of <em>CDH1em> and <em>CDH13em> DNA-hypermethylation is not an ideal diagnostic tool due to low diagnostic specificity and sensitivity. However, it was validated that <em>CDH1em> methylation analysis in serum samples may be of potential use as a prognostic marker for cervical cancer patients.

  7. Fumigant Antifungal Activity of Myrtaceae Essential Oils and Constituents from <em>Leptospermum petersoniiem> against Three <em>Aspergillus> Species

    Directory of Open Access Journals (Sweden)

    Il-Kwon Park

    2012-09-01

    Full Text Available Commercial plant essential oils obtained from 11 Myrtaceae plant species were tested for their fumigant antifungal activity against <em>Aspergillus ochraceusem>, <em>A. flavusem>, and <em>A. nigerem>. Essential oils extracted from<em> em>Leptospermum> <em>petersonii> at air concentrations of 56 × 10−3 mg/mL and 28 × 10−3 mg/mL completely inhibited the growth of the three <em>Aspergillus> species. However, at an air concentration of 14 × 10−3 mg/mL, inhibition rates of <em>L. petersoniiem> essential oils were reduced to 20.2% and 18.8% in the case of <em>A. flavusem> and <em>A. nigerem>, respectively. The other Myrtaceae essential oils (56 × 10−3 mg/mL only weakly inhibited the fungi or had no detectable affect. Gas chromatography-mass spectrometry analysis identified 16 compounds in <em>L. petersoniiem>> em>essential> em>oil.> em>The antifungal activity of the identified compounds was tested individually by using standard or synthesized compounds. Of these, neral and geranial inhibited growth by 100%, at an air concentration of 56 × 10−3 mg/mL, whereas the activity of citronellol was somewhat lover (80%. The other compounds exhibited only moderate or weak antifungal activity. The antifungal activities of blends of constituents identified in <em>L. petersoniiem> oil indicated that neral and geranial were the major contributors to the fumigant and antifungal activities.

  8. Predicting vertical jump height from bar velocity.

    Science.gov (United States)

    García-Ramos, Amador; Štirn, Igor; Padial, Paulino; Argüelles-Cienfuegos, Javier; De la Fuente, Blanca; Strojnik, Vojko; Feriche, Belén

    2015-06-01

    The objective of the study was to assess the use of maximum (Vmax) and final propulsive phase (FPV) bar velocity to predict jump height in the weighted jump squat. FPV was defined as the velocity reached just before bar acceleration was lower than gravity (-9.81 m·s(-2)). Vertical jump height was calculated from the take-off velocity (Vtake-off) provided by a force platform. Thirty swimmers belonging to the National Slovenian swimming team performed a jump squat incremental loading test, lifting 25%, 50%, 75% and 100% of body weight in a Smith machine. Jump performance was simultaneously monitored using an AMTI portable force platform and a linear velocity transducer attached to the barbell. Simple linear regression was used to estimate jump height from the Vmax and FPV recorded by the linear velocity transducer. Vmax (y = 16.577x - 16.384) was able to explain 93% of jump height variance with a standard error of the estimate of 1.47 cm. FPV (y = 12.828x - 6.504) was able to explain 91% of jump height variance with a standard error of the estimate of 1.66 cm. Despite that both variables resulted to be good predictors, heteroscedasticity in the differences between FPV and Vtake-off was observed (r(2) = 0.307), while the differences between Vmax and Vtake-off were homogenously distributed (r(2) = 0.071). These results suggest that Vmax is a valid tool for estimating vertical jump height in a loaded jump squat test performed in a Smith machine. Key pointsVertical jump height in the loaded jump squat can be estimated with acceptable precision from the maximum bar velocity recorded by a linear velocity transducer.The relationship between the point at which bar acceleration is less than -9.81 m·s(-2) and the real take-off is affected by the velocity of movement.Mean propulsive velocity recorded by a linear velocity transducer does not appear to be optimal to monitor ballistic exercise performance.

  9. Assessment of Genetic Fidelity in <em>Rauvolfia em>s>erpentina em>Plantlets Grown from Synthetic (Encapsulated Seeds Following <em>in Vitroem> Storage at 4 °C

    Directory of Open Access Journals (Sweden)

    Mohammad Anis

    2012-05-01

    Full Text Available An efficient method was developed for plant regeneration and establishment from alginate encapsulated synthetic seeds of <em>Rauvolfia serpentinaem>. Synthetic seeds were produced using <em>in vitroem> proliferated microshoots upon complexation of 3% sodium alginate prepared in Llyod and McCown woody plant medium (WPM and 100 mM calcium chloride. Re-growth ability of encapsulated nodal segments was evaluated after storage at 4 °C for 0, 1, 2, 4, 6 and 8 weeks and compared with non-encapsulated buds. Effects of different media <em>viz>; Murashige and Skoog medium; Lloyd and McCown woody Plant medium, Gamborg’s B5 medium and Schenk and Hildebrandt medium was also investigated for conversion into plantlets. The maximum frequency of conversion into plantlets from encapsulated nodal segments stored at 4 °C for 4 weeks was achieved on woody plant medium supplement with 5.0 μM BA and 1.0 μM NAA. Rooting in plantlets was achieved in half-strength Murashige and Skoog liquid medium containing 0.5 μM indole-3-acetic acid (IAA on filter paper bridges. Plantlets obtained from stored synseeds were hardened, established successfully <em>ex vitroem> and were morphologically similar to each other as well as their mother plant. The genetic fidelity of <em>Rauvolfia em>clones raised from synthetic seeds following four weeks of storage at 4 °C were assessed by using random amplified polymorphic<em> em>DNA (RAPD and inter-simple sequence repeat<em> em>(ISSR markers. All the RAPD and ISSR profiles from generated plantlets were monomorphic and comparable<em> em>to the mother plant, which confirms the genetic<em> em>stability among the clones. This synseed protocol could be useful for establishing a particular system for conservation, short-term storage and production of genetically identical and stable plants before it is released for commercial purposes.

  10. The EM Earthquake Precursor

    Science.gov (United States)

    Jones, K. B., II; Saxton, P. T.

    2013-12-01

    Many attempts have been made to determine a sound forecasting method regarding earthquakes and warn the public in turn. Presently, the animal kingdom leads the precursor list alluding to a transmission related source. By applying the animal-based model to an electromagnetic (EM) wave model, various hypotheses were formed, but the most interesting one required the use of a magnetometer with a differing design and geometry. To date, numerous, high-end magnetometers have been in use in close proximity to fault zones for potential earthquake forecasting; however, something is still amiss. The problem still resides with what exactly is forecastable and the investigating direction of EM. After the 1989 Loma Prieta Earthquake, American earthquake investigators predetermined magnetometer use and a minimum earthquake magnitude necessary for EM detection. This action was set in motion, due to the extensive damage incurred and public outrage concerning earthquake forecasting; however, the magnetometers employed, grounded or buried, are completely subject to static and electric fields and have yet to correlate to an identifiable precursor. Secondly, there is neither a networked array for finding any epicentral locations, nor have there been any attempts to find even one. This methodology needs dismissal, because it is overly complicated, subject to continuous change, and provides no response time. As for the minimum magnitude threshold, which was set at M5, this is simply higher than what modern technological advances have gained. Detection can now be achieved at approximately M1, which greatly improves forecasting chances. A propagating precursor has now been detected in both the field and laboratory. Field antenna testing conducted outside the NE Texas town of Timpson in February, 2013, detected three strong EM sources along with numerous weaker signals. The antenna had mobility, and observations were noted for recurrence, duration, and frequency response. Next, two

  11. Ruas e a ocupação vertical recente: labirintos murados

    Directory of Open Access Journals (Sweden)

    Lígia Beatriz Carreri Mauá

    Full Text Available Resumo No Brasil, o processo de verticalização nas cidades é cada vez mais intenso e, por conseguinte, verifica-se um grande número de lançamentos imobiliários em torres altas. A partir do exame das implantações de edifícios residenciais recentes, pontua-se a relação insuficiente entre esses espaços privados com as ruas nas quais estão inseridos. Essas construções ocupam grandes lotes, possuem fechamentos extensos e não evidenciam nenhum cuidado quanto à sua colocação no espaço urbano. Este estudo pretende abordar a qualidade da rua em uma conjuntura de ocupação vertical contemporânea. O estudo de caso abrange uma rua no bairro Gleba Palhano, em Londrina, PR, que apresenta uma concentração de edifícios verticais e em processo de consolidação. A fundamentação teórica possibilitou a extração de atributos analíticos dos espaços públicos e o exame do estudo de caso. O resultado obtido aponta prejuízos desse contexto no cotidiano dos cidadãos, uma vez que o espaço público não é utilizado como lugar de interação e troca social. O artigo conclui afirmando ser indispensável a retificação dessa forma de produção, objetivando a concepção de ambientes de maior qualidade.

  12. Classe social: conceitos e esquemas operacionais em pesquisa em saude

    Directory of Open Access Journals (Sweden)

    Rita Barradas Barata

    2013-08-01

    Full Text Available Discute-se a utilização do conceito de classe em pesquisas em saúde, as diferentes abordagens sociológicas de estratificação social e de estrutura de classes, o potencial explicativo do conceito em estudos de determinação social e desigualdades em saúde, os modelos de operacionalização elaborados para uso em pesquisas sociológicas, demográficas ou de saúde e os limites e possibilidades desses modelos. Foram destacados quatro modelos de operacionalização: de Singer para estudo da distribuição de renda no Brasil, adaptado por Barros para uso em pesquisas epidemiológicas; de Bronfman & Tuirán para o censo demográfico mexicano, adaptado por Lombardi et al para pesquisas epidemiológicas; de Goldthorpe para estudos socioeconômicos ingleses, adaptado pela Sociedade Espanhola de Epidemiologia; e o modelo de Wright para pesquisa em sociologia e ciência política, também usado em inquéritos populacionais em saúde. Em conclusão, conceitualmente cada um dos modelos apresentados é coerente com a concepção teórica que os embasam, mas não há como optar por qualquer deles, descartando os demais.

  13. Efecto de extractos vegetales de <em>Polygonum hydropiperoidesem>, <em>Solanum nigrumem> y <em>Calliandra pittieriem> sobre el gusano cogollero (<em>Spodoptera frugiperdaem>

    Directory of Open Access Journals (Sweden)

    Lizarazo H. Karol

    2008-12-01

    Full Text Available

    El gusano cogollero <em>Spodoptera frugiperdaem> es una de las plagas que más afectan los cultivos en la región de Sumapaz (Cundinamarca, Colombia. En la actualidad se controla principalmente aplicando productos de síntesis química, sin embargo la aplicación de extractos vegetales surge como una alternativa de menor impacto sobre el ambiente. Este control se emplea debido a que las plantas contienen metabolitos secundarios que pueden inhibir el desarrollo de los insectos. Por tal motivo, la presente investigación evaluó el efecto insecticida y antialimentario de extractos vegetales de barbasco <em>Polygonum hydropiperoidesem> (Polygonaceae, carbonero <em>Calliandra pittieriem> (Mimosaceae y hierba mora <em>Solanum nigrumem> (Solanaceae sobre larvas de <em>S. frugiperdaem> biotipo maíz. Se estableció una cría masiva del insecto en el laboratorio utilizando una dieta natural con hojas de maíz. Posteriormente se obtuvieron extractos vegetales utilizando solventes de alta polaridad (agua y etanol y media polaridad (diclorometano los cuales se aplicaron sobre las larvas de segundo instar. Los resultados más destacados se presentaron con extractos de <em>P. hydropiperoidesem>, obtenidos con diclorometano en sus diferentes dosis, con los cuales se alcanzó una mortalidad de 100% 12 días después de la aplicación y un efecto antialimentario representado por un consumo de follaje de maíz inferior al 4%, efectos similares a los del testigo comercial (Clorpiriphos.

  14. Estimating tropical vertical motion profile shapes from satellite observations

    Science.gov (United States)

    Back, L. E.; Handlos, Z.

    2013-12-01

    The vertical structure of tropical deep convection strongly influences interactions with larger scale circulations and climate. This research focuses on investigating this vertical structure and its relationship with mesoscale tropical weather states. We test the hypothesis that vertical motion shape varies in association with weather state type. We estimate mean state vertical motion profile shapes for six tropical weather states defined using cloud top pressure and optical depth properties from the International Satellite Cloud Climatology Project. The relationship between vertical motion and the dry static energy budget are utilized to set up a regression analysis that empirically determines two modes of variability in vertical motion from reanalysis data. We use these empirically determined modes, this relationship and surface convergence to estimate vertical motion profile shape from observations of satellite retrievals of rainfall and surface convergence. We find that vertical motion profile shapes vary systematically between different tropical weather states. The "isolated systems" regime exhibits a more ''bottom-heavy'' profile shape compared to the convective/thick cirrus and vigorous deep convective regimes, with maximum upward vertical motion occurring in the lower troposphere rather than the middle to upper troposphere. The variability we observe with our method does not coincide with that expected based on conventional ideas about how stratiform rain fraction and vertical motion are related.

  15. Opportunity's Surroundings on Sol 1798 (Vertical)

    Science.gov (United States)

    2009-01-01

    NASA's Mars Exploration Rover Opportunity used its navigation camera to take the images combined into this 180-degree view of the rover's surroundings during the 1,798th Martian day, or sol, of Opportunity's surface mission (Feb. 13, 2009). North is on top. This view is presented as a vertical projection with geometric seam correction. The rover had driven 111 meters (364 feet) southward on the preceding sol. Tracks from that drive recede northward in this view. For scale, the distance between the parallel wheel tracks is about 1 meter (about 40 inches). The terrain in this portion of Mars' Meridiani Planum region includes dark-toned sand ripples and lighter-toned bedrock.

  16. Opportunity's Surroundings on Sol 1687 (Vertical)

    Science.gov (United States)

    2009-01-01

    NASA's Mars Exploration Rover Opportunity used its navigation camera to take the images combined into this 360-degree view of the rover's surroundings on the 1,687th Martian day, or sol, of its surface mission (Oct. 22, 2008). Opportunity had driven 133 meters (436 feet) that sol, crossing sand ripples up to about 10 centimeters (4 inches) tall. The tracks visible in the foreground are in the east-northeast direction. Opportunity's position on Sol 1687 was about 300 meters southwest of Victoria Crater. The rover was beginning a long trek toward a much larger crater, Endeavour, about 12 kilometers (7 miles) to the southeast. This view is presented as a vertical projection with geometric seam correction.

  17. Opportunity's Surroundings After Sol 1820 Drive (Vertical)

    Science.gov (United States)

    2009-01-01

    NASA's Mars Exploration Rover Opportunity used its navigation camera to take the images combined into this full-circle view of the rover's surroundings during the 1,820th to 1,822nd Martian days, or sols, of Opportunity's surface mission (March 7 to 9, 2009). This view is presented as a vertical projection with geometric seam correction. North is at the top. The rover had driven 20.6 meters toward the northwest on Sol 1820 before beginning to take the frames in this view. Tracks from that drive recede southwestward. For scale, the distance between the parallel wheel tracks is about 1 meter (about 40 inches). The terrain in this portion of Mars' Meridiani Planum region includes dark-toned sand ripples and small exposures of lighter-toned bedrock.

  18. Lepton flavor violation with displaced vertices

    Directory of Open Access Journals (Sweden)

    Julian Heeck

    2018-01-01

    Full Text Available If light new physics with lepton-flavor-violating couplings exists, the prime discovery channel might not be ℓ→ℓ′γ but rather ℓ→ℓ′X, where the new boson X could be an axion, majoron, familon or Z′ gauge boson. The most conservative bound then comes from ℓ→ℓ′+inv, but if the on-shell X can decay back into leptons or photons, displaced-vertex searches could give much better limits. We show that only a narrow region in parameter space allows for displaced vertices in muon decays, μ→eX,X→γγ,ee, whereas tauon decays can have much more interesting signatures.

  19. Aerodynamic drag reduction by vertical splitter plates

    Science.gov (United States)

    Gilliéron, Patrick; Kourta, Azeddine

    2010-01-01

    The capacity of vertical splitter plates placed at the front or the rear of a simplified car geometry to reduce drag, with and without skew angle, is investigated for Reynolds numbers between 1.0 × 106 and 1.6 × 106. The geometry used is a simplified geometry to represent estate-type vehicles, for the rear section, and MPV-type vehicle. Drag reductions of nearly 28% were obtained for a zero skew angle with splitter plates placed at the front of models of MPV or utility vehicles. The results demonstrate the advantage of adapting the position and orientation of the splitter plates in the presence of a lateral wind. All these results confirm the advantage of this type of solution, and suggest that this expertise should be used in the automotive field to reduce consumption and improve dynamic stability of road vehicles.

  20. Aerodynamic drag reduction by vertical splitter plates

    Energy Technology Data Exchange (ETDEWEB)

    Gillieron, Patrick [Renault Group, Research Division, Fluid Mechanics and Aerodynamics, Guyancourt (France); Kourta, Azeddine [Polytech' Orleans, Institut PRISME, ESA, Orleans (France)

    2010-01-15

    The capacity of vertical splitter plates placed at the front or the rear of a simplified car geometry to reduce drag, with and without skew angle, is investigated for Reynolds numbers between 1.0 x 10{sup 6} and 1.6 x 10{sup 6}. The geometry used is a simplified geometry to represent estate-type vehicles, for the rear section, and MPV-type vehicle. Drag reductions of nearly 28% were obtained for a zero skew angle with splitter plates placed at the front of models of MPV or utility vehicles. The results demonstrate the advantage of adapting the position and orientation of the splitter plates in the presence of a lateral wind. All these results confirm the advantage of this type of solution, and suggest that this expertise should be used in the automotive field to reduce consumption and improve dynamic stability of road vehicles. (orig.)

  1. Vertically aligned BCN nanotubes with high capacitance.

    Science.gov (United States)

    Iyyamperumal, Eswaramoorthi; Wang, Shuangyin; Dai, Liming

    2012-06-26

    Using a chemical vapor deposition method, we have synthesized vertically aligned BCN nanotubes (VA-BCNs) on a Ni-Fe-coated SiO(2)/Si substrate from a melamine diborate precursor. The effects of pyrolysis conditions on the morphology and thermal property of grown nanotubes, as well as the nanostructure and composition of an individual BCN nanotube, were systematically studied. It was found that nitrogen atoms are bonded to carbons in both graphitic and pyridinic forms and that the resultant VA-BCNs grown at 1000 °C show the highest specific capacitance (321.0 F/g) with an excellent rate capability and high durability with respect to nonaligned BCN (167.3 F/g) and undoped multiwalled carbon nanotubes (117.3 F/g) due to synergetic effects arising from the combined co-doping of B and N in CNTs and the well-aligned nanotube structure.

  2. Functionalization of vertically aligned carbon nanotubes.

    Science.gov (United States)

    Van Hooijdonk, Eloise; Bittencourt, Carla; Snyders, Rony; Colomer, Jean-François

    2013-01-01

    This review focuses and summarizes recent studies on the functionalization of carbon nanotubes oriented perpendicularly to their substrate, so-called vertically aligned carbon nanotubes (VA-CNTs). The intrinsic properties of individual nanotubes make the VA-CNTs ideal candidates for integration in a wide range of devices, and many potential applications have been envisaged. These applications can benefit from the unidirectional alignment of the nanotubes, the large surface area, the high carbon purity, the outstanding electrical conductivity, and the uniformly long length. However, practical uses of VA-CNTs are limited by their surface characteristics, which must be often modified in order to meet the specificity of each particular application. The proposed approaches are based on the chemical modifications of the surface by functionalization (grafting of functional chemical groups, decoration with metal particles or wrapping of polymers) to bring new properties or to improve the interactions between the VA-CNTs and their environment while maintaining the alignment of CNTs.

  3. The ergonomics of vertical turret lathe operation.

    Science.gov (United States)

    Pratt, F M; Corlett, E N

    1970-12-01

    A study of the work load of 14 vertical turret lathe operators engaged on different work tasks in two factories is reported. For eight of these workers continuous heart rate recordings were made throughout the day. It was shown that in four cases improved technology was unlikely to lead to higher output and certain aspects of posture and equipment manipulation were major contributors to the limitations on increased output. The role of the work-rest schedule in increasing work loads was also demonstrated. Improvements in technology and methods to reduce the extent of certain work loads to enable heavy work to be done in shorter periods followed by light work or rest periods are given as means to modify and improve the output of these machines. Finally, the direction for the development of a predictive model for man-machine matching is introduced.

  4. The Vertical Profile of Ocean Mixing

    Science.gov (United States)

    Ferrari, R. M.; Nikurashin, M.; McDougall, T. J.; Mashayek, A.

    2014-12-01

    The upwelling of bottom waters through density surfaces in the deep ocean is not possible unless the sloping nature of the sea floor is taken into account. The bottom--intensified mixing arising from interaction of internal tides and geostrophic motions with bottom topography implies that mixing is a decreasing function of height in the deep ocean. This would further imply that the diapycnal motion in the deep ocean is downward, not upwards as is required by continuity. This conundrum regarding ocean mixing and upwelling in the deep ocean will be resolved by appealing to the fact that the ocean does not have vertical side walls. Implications of the conundrum for the representation of ocean mixing in climate models will be discussed.

  5. Solar heat gain through vertical cylindrical glass

    Energy Technology Data Exchange (ETDEWEB)

    Kassem, M.A.; Kaseb, S.; El-Refaie, M.F. [Cairo Univ., Mechanical Power Engineering Dept., Cairo (Egypt)

    1999-10-01

    Spaces with nonplanar glazed envelopes are frequently encountered in contemporary buildings. Such spaces represent a problem when calculating the solar heat gain in the course of estimating the cooling or heating load; and hence, sizing of cooling or heating systems. The calculation, using the information currently available in the literature, is tedious and/or approximate. In the present work, the computational procedure for evaluating the solar heat gain to a space having a vertical cylindrical glass envelope is established, and, a computer program is coded to carry out the necessary computations and yield the results in a detailed usable form. The program is versatile and allows for the arbitrary variation of all pertinent parameters. (Author)

  6. Solar heat gain through vertical cylindrical glass

    International Nuclear Information System (INIS)

    Kassem, M.A.; Kaseb, S.; El-Refaie, M.F.

    1999-01-01

    Spaces with nonplanar glazed envelopes are frequently encountered in contemporary buildings. Such spaces represent a problem when calculating the solar heat gain in the course of estimating the cooling or heating load; and hence, sizing of cooling or heating systems. The calculation, using the information currently available in the literature, is tedious and/or approximate. In the present work, the computational procedure for evaluating the solar heat gain to a space having a vertical cylindrical glass envelope is established, and, a computer program is coded to carry out the necessary computations and yield the results in a detailed usable form. The program is versatile and allows for the arbitrary variation of all pertinent parameters. (Author)

  7. Solar heat gain through vertical cylindrical glass

    Energy Technology Data Exchange (ETDEWEB)

    Kassem, M.A.; Kaseb, S.; El-Refaie, M.F. [Cairo Univ., Mechanical Power Engineering Dept., Cairo (Egypt)

    1999-07-01

    Spaces with nonplanar glazed envelopes are frequently encountered in contemporary buildings. Such spaces represent a problem when calculating the solar heat gain in the course of estimating the cooling or heating load; and hence, sizing of cooling or heating systems. The calculation, using the information currently available in the literature, is tedious and/or approximate. In the present work, the computational procedure for evaluating the solar heat gain to a space having a vertical cylindrical glass envelope is established, and, a computer program is coded to carry out the necessary computations and yield the results in a detailed usable form. The program is versatile and allows for the arbitrary variation of all pertinent parameters. (Author)

  8. Vertical pellet injection in FTU discharges

    International Nuclear Information System (INIS)

    Giovannozzi, E.; Annibaldi, S.V.; Buratti, P.

    2005-01-01

    Central fuelling and pellet enhanced performance modes have been obtained with pellets injected vertically from the high field side on the FTU tokamak. Four phases have been recognized: ablation of the pellets, drifting plasmoids, MHD modes which take the density to the centre of the discharge and finally an anomalous drift which further increases the density peaking. Pellet ablation data have been compared with values from a pellet ablation and deposition code. Comparison between 0.8 and 1.1 MA discharges at a high magnetic field (B T = 7 T) has been carried out: a higher performance has been obtained with the latter due to the higher target density and the larger inversion radius which would increase the effects of m = 1 modes to take the density to the plasma centre

  9. Vertical integration and optimal reimbursement policy.

    Science.gov (United States)

    Afendulis, Christopher C; Kessler, Daniel P

    2011-09-01

    Health care providers may vertically integrate not only to facilitate coordination of care, but also for strategic reasons that may not be in patients' best interests. Optimal Medicare reimbursement policy depends upon the extent to which each of these explanations is correct. To investigate, we compare the consequences of the 1997 adoption of prospective payment for skilled nursing facilities (SNF PPS) in geographic areas with high versus low levels of hospital/SNF integration. We find that SNF PPS decreased spending more in high integration areas, with no measurable consequences for patient health outcomes. Our findings suggest that integrated providers should face higher-powered reimbursement incentives, i.e., less cost-sharing. More generally, we conclude that purchasers of health services (and other services subject to agency problems) should consider the organizational form of their suppliers when choosing a reimbursement mechanism.

  10. Vertical distribution of radionuclides in soil

    International Nuclear Information System (INIS)

    Bikit, I.; Slivka, J.; Krmar, M.; Chonkic, Lj.; Veskovic, M.; Hadzhic, V.

    1990-01-01

    Pedological profiles were opened at selected representative locations on different geomorphic types and in certain soil layers down to 3 m depth. The mechanical composition, hydro physical and chemical features were studied. The vertical distribution of naturally occurring radionuclides and 137 Cs was analyzed during 1988 and 1989. The parameter alpha of the exponential dependence of activity concentration vs. depth were calculated for the three soil types, as well as the activity concentration of 137 Cs at depths of 1 and 3 m. The extent of 137 Cs migration was evaluated at these depths and it is shown that the coefficient α is proportional to the reciprocal of the time elapsed from the surface contamination. (author)

  11. GAUGING THE VERTICAL SPECIALIZATION IN EU TRADE

    Directory of Open Access Journals (Sweden)

    IULIA MONICA OEHLER-SINCAI

    2014-11-01

    Full Text Available The purpose of this paper is threefold. First, we review the mechanisms and determinants of vertical specialization (VS, as this has gradually become the dominant characteristic of international trade. Second, we underline that there is a rich literature regarding VS in EU trade, at aggregate and individual levels and research is advancing together with the instruments used to measure trade in value added. Third, our investigation brings to the forefront a classification of EU countries according to their GVC participation index, taking into consideration both upstream and downstream links. As a conclusion, the VS analyses help us better understand the interconnectedness among countries and industries by means of foreign direct investment, trade, labour migration and technology transfer.

  12. Development of Vertical Cable Seismic System (2)

    Science.gov (United States)

    Asakawa, E.; Murakami, F.; Tsukahara, H.; Ishikawa, K.

    2012-12-01

    The vertical cable seismic is one of the reflection seismic methods. It uses hydrophone arrays vertically moored from the seafloor to record acoustic waves generated by surface, deep-towed or ocean bottom sources. Analyzing the reflections from the sub-seabed, we could look into the subsurface structure. This type of survey is generally called VCS (Vertical Cable Seismic). Because VCS is an efficient high-resolution 3D seismic survey method for a spatially-bounded area, we proposed the method for the hydrothermal deposit survey tool development program that the Ministry of Education, Culture, Sports, Science and Technology (MEXT) started in 2009. We are now developing a VCS system, including not only data acquisition hardware but data processing and analysis technique. Our first experiment of VCS surveys has been carried out in Lake Biwa, JAPAN in November 2009 for a feasibility study. Prestack depth migration is applied to the 3D VCS data to obtain a high quality 3D depth volume. Based on the results from the feasibility study, we have developed two autonomous recording VCS systems. After we carried out a trial experiment in the actual ocean at a water depth of about 400m and we carried out the second VCS survey at Iheya Knoll with a deep-towed source. In this survey, we could establish the procedures for the deployment/recovery of the system and could examine the locations and the fluctuations of the vertical cables at a water depth of around 1000m. The acquired VCS data clearly shows the reflections from the sub-seafloor. Through the experiment, we could confirm that our VCS system works well even in the severe circumstances around the locations of seafloor hydrothermal deposits. We have carried out two field surveys in 2011. One is a 3D survey with a boomer for a high-resolution surface source and the other one for an actual field survey in the Izena Cauldron an active hydrothermal area in the Okinawa Trough. Through these surveys, we have confirmed that the

  13. Vertical profiles of BC direct radiative effect over Italy: high vertical resolution data and atmospheric feedbacks

    Science.gov (United States)

    Močnik, Griša; Ferrero, Luca; Castelli, Mariapina; Ferrini, Barbara S.; Moscatelli, Marco; Grazia Perrone, Maria; Sangiorgi, Giorgia; Rovelli, Grazia; D'Angelo, Luca; Moroni, Beatrice; Scardazza, Francesco; Bolzacchini, Ezio; Petitta, Marcello; Cappelletti, David

    2016-04-01

    Black carbon (BC), and its vertical distribution, affects the climate. Global measurements of BC vertical profiles are lacking to support climate change research. To fill this gap, a campaign was conducted over three Italian basin valleys, Terni Valley (Appennines), Po Valley and Passiria Valley (Alps), to characterize the impact of BC on the radiative budget under similar orographic conditions. 120 vertical profiles were measured in winter 2010. The BC vertical profiles, together with aerosol size distribution, aerosol chemistry and meteorological parameters, have been determined using a tethered balloon-based platform equipped with: a micro-Aethalometer AE51 (Magee Scientific), a 1.107 Grimm OPC (0.25-32 μm, 31 size classes), a cascade impactor (Siuotas SKC), and a meteorological station (LSI-Lastem). The aerosol chemical composition was determined from collected PM2.5 samples. The aerosol absorption along the vertical profiles was measured and optical properties calculated using the Mie theory applied to the aerosol size distribution. The aerosol optical properties were validated with AERONET data and then used as inputs to the radiative transfer model libRadtran. Vertical profiles of the aerosol direct radiative effect, the related atmospheric absorption and the heating rate were calculated. Vertical profile measurements revealed some common behaviors over the studied basin valleys. From below the mixing height to above it, a marked concentration drop was found for both BC (from -48.4±5.3% up to -69.1±5.5%) and aerosol number concentration (from -23.9±4.3% up to -46.5±7.3%). These features reflected on the optical properties of the aerosol. Absorption and scattering coefficients decreased from below the MH to above it (babs from -47.6±2.5% up to -71.3±3.0% and bsca from -23.5±0.8% up to -61.2±3.1%, respectively). Consequently, the Single Scattering Albedo increased above the MH (from +4.9±2.2% to +7.4±1.0%). The highest aerosol absorption was

  14. Poesia em Revista: Oroboro

    Directory of Open Access Journals (Sweden)

    Helena Alves Gouveia

    2008-10-01

    Full Text Available http://dx.doi.org/10.5007/1984-784x.2008v8n12p38 A serpente que engole a si mesma é uma figura curiosa do simbolismo de um processo de contínua transformação, de um movimento circular incessante, rumo à infinitude, sem traços de fim ou começo. Oroboro é um nome de origem grega que remete a esta serpente que se morde e penetra em si mesma ao engolir o próprio rabo. Mas também é o nome da revista de cultura editada em Curitiba pelos artistas-editores Ricardo Corona e Eliana Borges.

  15. Hipervitaminose D em animais

    Directory of Open Access Journals (Sweden)

    Paulo V. Peixoto

    2012-07-01

    Full Text Available Por meio de revisão da literatura, são apresentados dados referentes ao metabolismo da vitamina D, bem como aos principais aspectos toxicológicos, clínicos, bioquímicos, macroscópicos, microscópicos, ultraestruturais, imuno-histoquímicos e radiográficos de animais intoxicados natural e experimentalmente por essa vitamina, em diferentes espécies. Este estudo objetiva demonstrar a existência de muitas lacunas no conhecimento sobre mineralização fisiológica e patológica, em especial na mediação hormonal do fenômeno, bem como alertar para os riscos de ocorrência dessa intoxicação.

  16. A democracia em Cuba

    OpenAIRE

    Zaldívar, Julio César Guanche

    2011-01-01

    O triunfo revolucionário de 1959 consagrou em Cuba um novo conceito de democracia, com o intuito de garantir o acesso à vida política ativa de grandes setores da população, antes excluídos. Para isso, foi desenvolvida uma política de inclusão social com caráter universal. A prática política popular deixou as riquezas do país em mãos da população carente e gerou uma grande mobilidade social, fato que foi central para o aumento da participação popular. O contexto de agressão imperialista e o pr...

  17. Tuberculose Infantil em Portugal

    OpenAIRE

    Carapau, João

    2014-01-01

    Dos números recentemente publicados pela Direcção Geral da Saúde / Núcleo de Tuberculose e Doenças Respiratórias relativos aos anos de 1992 e 1993 e pelo Instituto Nacional de Estatística relativos a 1994, conclui-se que os casos de Tuberculose (TB) notificados pouco têm decrescido nos últimos 15 anos: descida média anual de 6,3% para os casos em geral e 14% para os menores de 15 anos; a taxa global de incidência apurada em 1994 voltou a subir — 51,1 (52,4 no Continente). Para o autor a me...

  18. Universidade em ruinas?

    OpenAIRE

    Katuta, Ângela Massumi; UEL/CCE/Departamento de Geociências

    2010-01-01

    A Universidade, desde as suas origens no século XII, sempre esteve atrelada a instituições e setores hegemônicos da sociedade. Segundo Trindade (2000), a sua “invenção” ocorreu em plena Idade Média na Europa, sob a proteção da Igreja romana, sendo que as Universidades de Bolonha (1108) e Paris (1211) foram as primeiras a serem criadas 

  19. Produção de frutos e estolhos do morangueiro em diferentes sistemas de cultivo em ambiente protegido

    Directory of Open Access Journals (Sweden)

    Fernandes-Júnior Flavio

    2002-01-01

    Full Text Available Este trabalho teve por objetivo comparar a produção de frutos e de estolhos do morangueiro (Fragariaxananassa Duch. cv. Campinas IAC-2712, em função de três sistemas de condução em ambiente protegido (solo, hidropônico-NFT e hidroponia em casca de arroz carbonizada em colunas verticais. O experimento foi realizado no período de junho de 2000 a fevereiro de 2001, na Estação Experimental de Agronomia de Jundiaí (latitude: 23:06'S, longitude: 46:55'W, altitude média: 715 m, clima Cwa, do Instituto Agronômico, seguindo-se o delineamento de parcelas subdivididas com três repetições, em casa de vegetação modelo semi-arco com abertura zenital superior. Nos dois sistemas hidropônicos foram usadas duas composições de soluções nutritivas, respectivamente, para a fase de crescimento vegetativo e para a produção de frutos. Os resultados obtidos permitiram concluir que no sistema vertical, embora as produções de frutos e de estolhos por planta tenham sido menores que nos demais sistemas estudados, há possibilidade de melhor aproveitamento interno do ambiente protegido, com reflexos positivos no aumento do rendimento por área e maior facilidade de manejo da cultura, incluindo as operações de transplante, limpeza das plantas e colheitas de frutos e remoção de estolhos. Essas vantagens também se aplicam ao sistema hidropônico-NFT mesmo não tendo apresentado diferenças de produção em relação ao cultivo convencional.

  20. Vertical and horizontal distribution of pollination systems in cerrado fragments of central Brazil

    Directory of Open Access Journals (Sweden)

    Fernanda Quintas Martins

    2007-05-01

    Full Text Available In fragments of the cerrado, we determined the frequency of pollination systems and analyzed their spatial distribution. We placed 38 transects, sampling 2,280 individuals and 121 species. As expected in Neotropical regions, bee-pollination was the most frequent pollination system. We found a decrease in the frequency of plants pollinated by beetles towards the fragment interior. Similarly, we found significant variation in relation to height just for the bats; there was an increase in the frequency of plants pollinated by bats towards the higher heights. In general, we found no horizontal and vertical variation in the pollination systems, probably as consequence of the more open physiognomy of the cerrado vegetation.As principais pressões seletivas nas estratégias de polinização originam principalmente do ambiente em que plantas ocorrem, como subdossel, dossel, borda ou interior de um fragmento. Diferentes condições ambientais aumentam as diferenças entre os nichos ecológicos e podem implicar diferenças nas proporções dos sistemas de polinização. Em fragmentos de cerrado, determinamos a freqüência dos sistemas de polinização e analisamos sua distribuição espacial. Lançamos 38 transecções aleatoriamente, amostrando 2.280 indivíduos e 121 espécies. Como esperado para regiões neotropicais, a polinização por abelhas foi o sistema de polinização mais freqüente. Encontramos uma diminuição na freqüência de plantas polinizadas por besouros em direção ao interior do fragmento. De modo similar, encontramos uma variação significativa em relação à altura somente para os morcegos, havendo um aumento na freqüência de plantas em direção a alturas mais altas. Em geral, não encontramos variações horizontais e verticais nos sistemas de polinização, provavelmente, como conseqüência da fisionomia mais aberta de cerrado.