WorldWideScience

Sample records for element llatas meeldivalt

  1. 28 June 2012 - Members of the European Brain Council led by President Mary Baker visiting the LHC tunnel at Point 5 with Technology Department Group Leader L. Bottura and CMS experimental area with Run Coordinator M. Chamizo-Llatas.

    CERN Multimedia

    Jean-Claude Gadmer

    2012-01-01

    28 June 2012 - Members of the European Brain Council led by President Mary Baker visiting the LHC tunnel at Point 5 with Technology Department Group Leader L. Bottura and CMS experimental area with Run Coordinator M. Chamizo-Llatas.

  2. Microsoft üllatas hiigeldividenidga / Sirje Rank

    Index Scriptorium Estoniae

    Rank, Sirje, 1966-

    2004-01-01

    Microsoft alustab aktsionäridele oma ajaloo suurima dividendi väljamaksmist, mille suuruseks on 75 miljardit dollarit. Dividendist teenivad tulu ka Eesti pankade vahendusel Microsofti investeerinud inimesed

  3. Angola üllatas valimistega / Allan Espenberg

    Index Scriptorium Estoniae

    Espenberg, Allan

    2008-01-01

    Angolas toimusid peale 16 aastast vaheaega parlamendivalimised, kus ülekaaluka võidu saavutas Angola Vabastamise Rahvaliikumine (MPLA). Uus peaminister teatas Antonio Paulo Kassoma, et tema prioriteedid on MPLA programmi elluviimine ja lähtumine Jose Eduardo dos Santose antud suunistest

  4. Noortalunik üllatas õpetajaid raamatuga / Silvia Paluoja

    Index Scriptorium Estoniae

    Paluoja, Silvia, 1956-

    2005-01-01

    Täna annab MTÜ Eesti Noortalunikud juhatuse liige Karel Tölp Audru Keskkoolile üle paarkümend põllumajandust käsitlevat raamatut, seega on trükis tema vahendusel jõudnud maakonna igasse keskkooli ja gümnaasiumi. Raamatu pealkiri on ́ђجEU Enlargement, discovering the Agriculture of the new Member Statéђح, trükise on välja andnud Euroopa noortalunike organisatsioon (CEJA) Euroopa Komisjoni toetusel. Vestlusest K. Tölbiga

  5. Silvano üllatas tugeva aasta alguse tulemusega / Silvia Viidik

    Index Scriptorium Estoniae

    Viidik, Silvia, 1972-

    2010-01-01

    Rahvusvahelise naistrerõivaste müügiketi Silvano Fashion Groupi käive kasvas 2009. a. I kvartaliga võrreldes veerandi võrra. Silvano tulud on suurenenud tänu nõudluse taastumisele Vene turul. Baltika kahjum I kvartalis oli 32 mln. krooni, mida on 50% vähem kui aasta tagasi. Graafik

  6. Eesti Telekom üllatas heade tulemustega / Erkki Erilaid

    Index Scriptorium Estoniae

    Erilaid, Erkki

    2000-01-01

    Eesti Telekom teenib enne tavatelefonituru konkurentsile avanemist rekordilisi kasumeid, firma esimese poolaasta kasum ulatus üle 541 miljoni krooni. Diagramm: Mobiiltelefonide kasutajad Euroopas 100 elaniku kohta

  7. Toxic Elements

    DEFF Research Database (Denmark)

    Hajeb, Parvaneh; Shakibazadeh, Shahram; Sloth, Jens Jørgen

    2016-01-01

    Food is considered the main source of toxic element (arsenic, cadmium, lead, and mercury) exposure to humans, and they can cause major public health effects. In this chapter, we discuss the most important sources for toxic element in food and the foodstuffs which are significant contributors...... to human exposure. The occurrence of each element in food classes from different regions is presented. Some of the current toxicological risk assessments on toxic elements, the human health effect of each toxic element, and their contents in the food legislations are presented. An overview of analytical...... techniques and challenges for determination of toxic elements in food is also given....

  8. PELTIER ELEMENTS

    CERN Document Server

    Tani, Laurits

    2015-01-01

    To control Peltier elements, temperature controller was used. I used TEC-1091 that was manufactured my Meerstetter Engineering. To gain control with the temperature controller, software had to be intalled on a controlling PC. There were different modes to control the Peltier: Tempererature controller to control temperature, Static current/voltage to control voltage and current and LIVE ON/OFF to auto-tune the controller respectively to the system. Also, since near the collision pipe there is much radiation, radiation-proof Peltier elements have to be used. To gain the best results, I had to find the most efficient Peltier elements and try to get their cold side to -40 degrees Celsius.

  9. FUEL ELEMENT

    Science.gov (United States)

    Bean, R.W.

    1963-11-19

    A ceramic fuel element for a nuclear reactor that has improved structural stability as well as improved cooling and fission product retention characteristics is presented. The fuel element includes a plurality of stacked hollow ceramic moderator blocks arranged along a tubular raetallic shroud that encloses a series of axially apertured moderator cylinders spaced inwardly of the shroud. A plurality of ceramic nuclear fuel rods are arranged in the annular space between the shroud and cylinders of moderator and appropriate support means and means for directing gas coolant through the annular space are also provided. (AEC)

  10. Radiographic element

    International Nuclear Information System (INIS)

    Abbott, T.I.; Jones, C.G.

    1983-01-01

    Radiographic elements are disclosed having first and second silver halide emulsion layers comprised of a dispersing medium and radiation-sensitive silver halide grains, and a support interposed between said silver halide emulsion layers capable of transmitting radiation to which said second silver halide emulsion layer is responsive. These elements are characterized in that at least said first silver halide emulsion layer contains tabular silver halide grains and spectral sensitizing dye adsorbed to the surface of the grains. Crossover can be improved in relation to the imaging characteristics. (author)

  11. Fuel element

    International Nuclear Information System (INIS)

    Hirose, Yasuo.

    1982-01-01

    Purpose: To increase the plenum space in a fuel element used for a liquid metal cooled reactor. Constitution: A fuel pellet is secured at one end with an end plug and at the other with a coil spring in a tubular container. A mechanism for fixing the coil spring composed of a tubular unit is mounted by friction with the inner surface of the tubular container. Accordingly, the recoiling force of the coil spring can be retained by fixing mechanism with a small volume, and since a large amount of plenum space can be obtained, the internal pressure rise in the cladding tube can be suppressed even if large quantities of fission products are discharged. (Kamimura, M.)

  12. Element Method

    Directory of Open Access Journals (Sweden)

    Fong Kah Soon

    2017-01-01

    Full Text Available The vibration of damped pipeline conveying fluid with the effect of fluid-structure interaction is known to pose challenging problems in oil and gas industry. In this study, the natural frequency of fluid-structure interaction in pipeline conveying fluid set on viscoelastic foundation is investigated by using finite element method. The governing partial differential equation is modelled based on Euler-Bernoulli beam theory. By applying Galerkin weighted residual method, the stiffness, damping, and mass matrices are obtained. For a given boundary condition which is simply supported, two components of the foundation (foundation stiffness and damping which are influencing the damped natural frequency of the pipeline are studied for different fluid velocity. The results indicate that increasing the foundation stiffness from 10 kN/m3 to 30 kN/m3 increases the natural frequency of the pipeline, while increasing the foundation damping from 1 kN.s/m3 to 3 kN.s/m3 and fluid velocity decrease the natural frequency of the pipeline. The accuracy of the results obtained is validated against data from literature.

  13. Poola parlamendivalimiste võitja üllatas peaministrikandidaadiga / Heiki Suurkask

    Index Scriptorium Estoniae

    Suurkask, Heiki, 1972-

    2005-01-01

    Kõige tõenäolisema peaministrikandidaadi Jaroslaw Kaczynski asemel hakkab Poola valitsust moodustama Kazimierz Marcinkiewicz. Vaatlejate hinnangul keskendub J. Kaczynski oma venna presidendiks aitamisele

  14. Välismaa noori üllatas metsarohkus / Sirle Sommer-Kalda

    Index Scriptorium Estoniae

    Sommer-Kalda, Sirle, 1974-

    2009-01-01

    Euroopa Noored Esti büroo poolt rahastatud rahvusvahelisest noorteprojektist "From Nature - To Nature", milles osalesid Avinurme noored ja 16 erinevate välisriikide noort. Illuka põhikool võõrustas välismaa noori Comeniuse projekti raames, mille teemaks "Roheline planeet"

  15. Külanäitemäng üllatas tenori ja kooriga / Liisi Seil

    Index Scriptorium Estoniae

    Seil, Liisi, 1971-

    2009-01-01

    17.-19. juulini toimus Lilli külas 4. Nava lava festival. Loeti luulet ja mängiti Jaak Kõdari kirjutatud mulgikeelset näitemängu "Kõik läheb mööda" ning lasteetendust "Hundi ja Rebase lend lõunanabale". Mõlemad lavastas Silvia Soro

  16. City Plaza büroohoone edu üllatas asjatundjaid / Aivo Vahemets

    Index Scriptorium Estoniae

    Vahemets, Aivo

    2004-01-01

    Kuigi kinnisvaraspetsialistid olid City Plaza büroohoonesse äripindade rentnike leidmise suhtes skeptilised, on Tallinnas asuvas City Plaza kõrghoones 31 äripinnast rentimata veel vaid kaks. Vt. samas intervjuud Ain Kivisaarega. Lisa: City Plaza büroohoone

  17. The Ekamanganese elements

    International Nuclear Information System (INIS)

    Noddack, W.; Tacke, I.; Berg, O.

    1988-03-01

    A recent study tends to revalidate the search for element 43 done in 1925. In ores with properties similar to the hypothetical chemical properties of the missing elements 43 and 75, the unknown elements were concentrated by chemical means. Roentgen-ray spectroscopy was applied in order to observe the characteristic Roentgen L lines for element 75 and K lines for element 43. Element 43 was observed in sperrylith, gadolinit, fergusonit and columbit. The name masurium was proposed. Similarly, element 75 was observed in tantalit, wolframit and platinit. The name rhenium was chosen. (MCB)

  18. Mikromechanisches Element und Sensor zur Ueberwachung eines mikromechanischen Elements

    OpenAIRE

    Klose, T.; Conrad, H.; Grasshoff, T.

    2008-01-01

    DE 102008049647 A1 UPAB: 20100428 NOVELTY - The micromechanical element (100) has a mobile functional element (110) and a retaining element (120), where a retaining element and the functional element are connected at a junction (122). Another retaining element (130) and the functional element are connected at another junction (132). The former retaining element has a piezoelectric drive element (124) and the latter retaining element has another piezoelectric drive element (134). DETAILED DESC...

  19. Element-ary Development.

    Science.gov (United States)

    Schamp, Homer W., Jr.

    1989-01-01

    Describes the historic development of the periodic table from the four-element theory to the Lavoisier's table. Presents a table listing the old and new names of chemicals and the Lavoisier's table of elements. Lists two references. (YP)

  20. Data Element Registry Services

    Data.gov (United States)

    U.S. Environmental Protection Agency — Data Element Registry Services (DERS) is a resource for information about value lists (aka code sets / pick lists), data dictionaries, data elements, and EPA data...

  1. Basic Finite Element Method

    International Nuclear Information System (INIS)

    Lee, Byeong Hae

    1992-02-01

    This book gives descriptions of basic finite element method, which includes basic finite element method and data, black box, writing of data, definition of VECTOR, definition of matrix, matrix and multiplication of matrix, addition of matrix, and unit matrix, conception of hardness matrix like spring power and displacement, governed equation of an elastic body, finite element method, Fortran method and programming such as composition of computer, order of programming and data card and Fortran card, finite element program and application of nonelastic problem.

  2. Rare (Earth Elements [score

    Directory of Open Access Journals (Sweden)

    Camilo Méndez

    2014-12-01

    Full Text Available Rare (Earth Elements is a cycle of works for solo piano. The cycle was inspired by James Dillon’s Book of Elements (Vol. I-V. The complete cycle will consist of 14 pieces; one for each selected rare (earth element. The chosen elements are Neodymium, Erbium, Tellurium, Hafnium, Tantalum, Technetium, Indium, Dysprosium, Lanthanium, Cerium, Europium, Terbium, Yttrium and Darmstadtium. These elements were selected due to their special atomic properties that in many cases make them extremely valuable for the development of new technologies, and also because of their scarcity. To date, only 4 works have been completed Yttrium, Technetium, Indium and Tellurium.

  3. The synthetic elements

    International Nuclear Information System (INIS)

    Hoffman, D.C.

    1990-05-01

    Prior to 1940, the heaviest element known was uranium, discovered in 1789. Since that time the elements 93 through 109 have been synthesized and identified and the elements 43, 61, 85, and 87 which were missing form the periodic tables of the 1930's have been discovered. The techniques and problems involved in these discoveries and the placement of the transuranium elements in the periodic table will be discussed. The production and positive identification of elements heavier than Md (Z=101), which have very short half-lives and can only be produced an atom-at-a-time, are very difficult and there have been controversies concerning their discovery. Some of the new methods which have been developed and used in these studies will be described. The prospects for production of still heavier elements will be considered

  4. The solar element

    DEFF Research Database (Denmark)

    Kragh, Helge

    2009-01-01

    of the nineteenth century. In the modest form of a yellow spectral line known as D3, 'helium' was sometimes supposed to exist in the Sun's atmosphere, an idea which is traditionally ascribed to J. Norman Lockyer. Did Lockyer discover helium as a solar element? How was the suggestion received by chemists, physicists...... and astronomers in the period until the spring of 1895, when William Ramsay serendipitously found the gas in uranium minerals? The hypothetical element helium was fairly well known, yet Ramsay's discovery owed little or nothing to Lockyer's solar element. Indeed, for a brief while it was thought that the two...... elements might be different. The complex story of how helium became established as both a solar and terrestrial element involves precise observations as well as airy speculations. It is a story that is unique among the discovery histories of the chemical elements....

  5. The Pulley Element

    Directory of Open Access Journals (Sweden)

    Štekbauer Hynek

    2016-12-01

    Full Text Available The pulley is used in a number of structures for the mechanical advantage it gives. This paper presents an approach for the calculation of a pulley-cable system using a special pulley element in the finite element method. The Lagrange Multiplier method and Penalty method are used to define the pulley element, as described in this paper. Both approaches are easy to implement in general FEM codes.

  6. The Pulley Element

    OpenAIRE

    Štekbauer Hynek

    2016-01-01

    The pulley is used in a number of structures for the mechanical advantage it gives. This paper presents an approach for the calculation of a pulley-cable system using a special pulley element in the finite element method. The Lagrange Multiplier method and Penalty method are used to define the pulley element, as described in this paper. Both approaches are easy to implement in general FEM codes.

  7. Elements in biological AMS

    International Nuclear Information System (INIS)

    Vogel, J.S.; McAninch, J.; Freeman, S.

    1996-08-01

    AMS (Accelerator Mass Spectrometry) provides high detection sensitivity for isotopes whose half-lives are between 10 years and 100 million years. 14 C is the most developed of such isotopes and is used in tracing natural and anthropogenic organic compounds in the Earth's biosphere. Thirty-three elements in the main periodic table and 17 lanthanides or actinides have long lived isotopes, providing potential tracers for research in elemental biochemistry. Overlap of biologically interesting heavy elements and possible AMS tracers is discussed

  8. Fuel element loading system

    International Nuclear Information System (INIS)

    Arya, S.P; s.

    1978-01-01

    A nuclear fuel element loading system is described which conveys a plurality of fuel rods to longitudinal passages in fuel elements. Conveyor means successively position the fuel rods above the longitudinal passages in axial alignment therewith and adapter means guide the fuel rods from the conveyor means into the longitudinal passages. The fuel elements are vibrated to cause the fuel rods to fall into the longitudinal passages through the adapter means

  9. Chemistry of superheavy elements

    International Nuclear Information System (INIS)

    Schaedel, M.

    2012-01-01

    The chemistry of superheavy elements - or transactinides from their position in the Periodic Table - is summarized. After giving an overview over historical developments, nuclear aspects about synthesis of neutron-rich isotopes of these elements, produced in hot-fusion reactions, and their nuclear decay properties are briefly mentioned. Specific requirements to cope with the one-atom-at-a-time situation in automated chemical separations and recent developments in aqueous-phase and gas-phase chemistry are presented. Exciting, current developments, first applications, and future prospects of chemical separations behind physical recoil separators ('pre-separator') are discussed in detail. The status of our current knowledge about the chemistry of rutherfordium (Rf, element 104), dubnium (Db, element 105), seaborgium (Sg, element 106), bohrium (Bh, element 107), hassium (Hs, element 108), copernicium (Cn, element 112), and element 114 is discussed from an experimental point of view. Recent results are emphasized and compared with empirical extrapolations and with fully-relativistic theoretical calculations, especially also under the aspect of the architecture of the Periodic Table. (orig.)

  10. Berkeley new element program

    International Nuclear Information System (INIS)

    Ghiorso, A.

    1975-09-01

    The work done with element 106 is reviewed, and a new experiment which bears on the properties of the isotope of mass 260 with atomic number 104 is discussed. It is noted that in the case of element 106 a link is demonstrated to the granddaughter as well as the daughter

  11. Fuel element development

    Energy Technology Data Exchange (ETDEWEB)

    Muehling, G.

    1983-01-01

    The studies concerning breeders for the development of fuel elements carried out in Karlsruhe aim at: - optimization of fuel, - support of fuel rod and fuel element concepts from steady-state and field irradiation experiments and their evaluation, and - developing appropriate cladding and structural material and its adaptation to the requirements of high-output breeder reactors.

  12. Seagrass leaf element content

    NARCIS (Netherlands)

    Vonk, J.A.; Smulders, Fee O.H.; Christianen, Marjolijn J.A.; Govers, Laura L.

    2017-01-01

    Knowledge on the role of seagrass leaf elements and in particular micronutrients and their ranges is limited. We present a global database, consisting of 1126 unique leaf values for ten elements, obtained from literature and unpublished data, spanning 25 different seagrass species from 28 countries.

  13. Proceedings of transuranium elements

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    The identification of the first synthetic elements was established by chemical evidence. Conclusive proof of the synthesis of the first artificial element, technetium, was published in 1937 by Perrier and Segre. An essential aspect of their achievement was the prediction of the chemical properties of element 43, which had been missing from the periodic table and which was expected to have properties similar to those of manganese and rhenium. The discovery of other artificial elements, astatine and francium, was facilitated in 1939-1940 by the prediction of their chemical properties. A little more than 50 years ago, in the spring of 1940, Edwin McMillan and Philip Abelson synthesized element 93, neptunium, and confirmed its uniqueness by chemical means. On August 30, 1940, Glenn Seaborg, Arthur Wahl, and the late Joseph Kennedy began their neutron irradiations of uranium nitrate hexahydrate. A few months later they synthesized element 94, later named plutonium, by observing the alpha particles emitted from uranium oxide targets that had been bombarded with deuterons. Shortly thereafter they proved that is was the second transuranium element by establishing its unique oxidation-reduction behavior. The symposium honored the scientists and engineers whose vision and dedication led to the discovery of the transuranium elements and to the understanding of the influence of 5f electrons on their electronic structure and bonding. This volume represents a record of papers presented at the symposium

  14. Transposable elements in mosquitoes.

    Science.gov (United States)

    Boulesteix, M; Biémont, C

    2005-01-01

    We describe the current state of knowledge about transposable elements (TEs) in different mosquito species. DNA-based elements (class II elements), non-LTR retrotransposons (class I elements), and MITEs (Miniature Inverted Repeat Transposable Elements) are found in the three genera, Anopheles, Aedes and Culex, whereas LTR retrotransposons (class I elements) are found only in Anopheles and Aedes. Mosquitoes were the first insects in which MITEs were reported; they have several LTR retrotransposons belonging to the Pao family, which is distinct from the Gypsy-Ty3 and Copia-Ty1 families. The number of TE copies shows huge variations between classes of TEs within a given species (from 1 to 1000), in sharp contrast to Drosophila, which shows only relatively minor differences in copy number between elements (from 1 to 100). The genomes of these insects therefore display major differences in the amount of TEs and therefore in their structure and global composition. We emphasize the need for more population genetic data about the activity of TEs, their distribution over chromosomes and their frequencies in natural populations of mosquitoes, to further the current attempts to develop a transgenic mosquito unable to transmit malaria that is intended to replace the natural populations.

  15. Neutronic fuel element fabrication

    Science.gov (United States)

    Korton, George

    2004-02-24

    This disclosure describes a method for metallurgically bonding a complete leak-tight enclosure to a matrix-type fuel element penetrated longitudinally by a multiplicity of coolant channels. Coolant tubes containing solid filler pins are disposed in the coolant channels. A leak-tight metal enclosure is then formed about the entire assembly of fuel matrix, coolant tubes and pins. The completely enclosed and sealed assembly is exposed to a high temperature and pressure gas environment to effect a metallurgical bond between all contacting surfaces therein. The ends of the assembly are then machined away to expose the pin ends which are chemically leached from the coolant tubes to leave the coolant tubes with internal coolant passageways. The invention described herein was made in the course of, or under, a contract with the U.S. Atomic Energy Commission. It relates generally to fuel elements for neutronic reactors and more particularly to a method for providing a leak-tight metal enclosure for a high-performance matrix-type fuel element penetrated longitudinally by a multiplicity of coolant tubes. The planned utilization of nuclear energy in high-performance, compact-propulsion and mobile power-generation systems has necessitated the development of fuel elements capable of operating at high power densities. High power densities in turn require fuel elements having high thermal conductivities and good fuel retention capabilities at high temperatures. A metal clad fuel element containing a ceramic phase of fuel intimately mixed with and bonded to a continuous refractory metal matrix has been found to satisfy the above requirements. Metal coolant tubes penetrate the matrix to afford internal cooling to the fuel element while providing positive fuel retention and containment of fission products generated within the fuel matrix. Metal header plates are bonded to the coolant tubes at each end of the fuel element and a metal cladding or can completes the fuel-matrix enclosure

  16. The Elements Drawing

    Science.gov (United States)

    Dkeidek, Iyad M.

    2003-05-01

    This paper presents a game designed to convey chemical concepts related to periodic table elements: their symbols, electronic configurations, uses, and properties. Students answer questions and connect chemical symbols (as in a connect-the-dots game), so that correct answers yield a picture. Different pictures can be obtained depending on the elements chosen, their location in the figure of the game, and the questions asked. While this game was developed for first- or second-year high school students, teachers have the flexibility to choose different elements and alter the questions of the game to accommodate the level of the students in their classes.

  17. Flow Element Models

    DEFF Research Database (Denmark)

    Heiselberg, Per; Nielsen, Peter V.

    Air distribution in ventilated rooms is a flow process that can be divided into different elements such as supply air jets, exhaust flows, thermal plumes, boundary layer flows, infiltration and gravity currents. These flow elements are isolated volumes where the air movement is controlled...... by a restricted number of parameters, and the air movement is fairly independent of the general flow in the enclosure. In many practical situations, the most convenient· method is to design the air distribution system using flow element theory....

  18. Elements in biological AMS

    Energy Technology Data Exchange (ETDEWEB)

    Vogel, J.S.; McAninch, J.; Freeman, S.

    1996-08-01

    AMS (Accelerator Mass Spectrometry) provides high detection sensitivity for isotopes whose half-lives are between 10 years and 100 million years. {sup 14}C is the most developed of such isotopes and is used in tracing natural and anthropogenic organic compounds in the Earth`s biosphere. Thirty-three elements in the main periodic table and 17 lanthanides or actinides have long lived isotopes, providing potential tracers for research in elemental biochemistry. Overlap of biologically interesting heavy elements and possible AMS tracers is discussed.

  19. Nuclear reactor fuel elements

    International Nuclear Information System (INIS)

    Hindle, E.D.

    1981-01-01

    An array of rods comprising zirconium alloy sheathed nuclear fuel pellets assembled to form a fuel element for a pressurised water reactor is claimed. The helium gas pressure within each rod differs substantially from that of its closest neighbours

  20. Nuclear reactor fuel elements

    International Nuclear Information System (INIS)

    Hindle, E.D.

    1984-01-01

    The fuel elements for a pressurised water reactor comprise arrays of rods of zirconium alloy sheathed nuclear fuel pellets. The helium gas pressure within each rod differs substantially from that of its closest neighbours

  1. Bridge element deterioration rates.

    Science.gov (United States)

    2008-10-01

    This report describes the development of bridge element deterioration rates using the NYSDOT : bridge inspection database using Markov chains and Weibull-based approaches. It is observed : that Weibull-based approach is more reliable for developing b...

  2. Divergent picornavirus IRES elements

    DEFF Research Database (Denmark)

    Belsham, Graham

    2009-01-01

    Internal ribosome entry site (IRES) elements were first identified about 20 years ago within the 5' untranslated region of picornavirus RNAs. They direct a cap-independent mechanism of translation initiation on the viral RNA. Within the picornavirus family it is now known that there are four...... classes of IRES element which vary in size (450-270nt), they also have different, complex, secondary structures and distinct requirements for cellular proteins to allow them to function. This review describes the features of each class of picornavirus IRES element but focuses on the characteristics...... of the most recently described group, initially identified within the porcine teschovirus-1 RNA, which has strong similarities to the IRES elements from within the genomes of hepatitis C virus and the pestiviruses which are members of the flavivirus family. The selection of the initiation codon...

  3. 2. Transuranic elements

    International Nuclear Information System (INIS)

    Anon.

    1975-01-01

    Methods of sample collection, sample storage, sample procedures and radioanalytical procedures for transuranic elements in marine environment are reviewed and recommended. Alpha spectrometry and scintillation techniques are used for measurement of isotopic content. Separation processes for samples are described

  4. Heavy element research

    International Nuclear Information System (INIS)

    Anon.

    1976-01-01

    Heavy element research activities in metallurgy and ceramics during 1976 at Lawrence Berkeley Laboratory are reviewed. Topics include: microstructure, properties and alloy design; ceramic alloy program; high resolution and high voltage electron microscopy; and powder metallurgy

  5. New roof element system

    DEFF Research Database (Denmark)

    Ditlev, Jesper; Rudbeck, Claus Christian

    1997-01-01

    The aim of the project has been to develop an element system for warm deck roofs which, from a thermal and economical point of view, can deal with the future demands for heat loss coefficients for low slope roofs.......The aim of the project has been to develop an element system for warm deck roofs which, from a thermal and economical point of view, can deal with the future demands for heat loss coefficients for low slope roofs....

  6. Structural elements design manual

    CERN Document Server

    Draycott, Trevor

    2012-01-01

    Gives clear explanations of the logical design sequence for structural elements. The Structural Engineer says: `The book explains, in simple terms, and with many examples, Code of Practice methods for sizing structural sections in timber, concrete,masonry and steel. It is the combination into one book of section sizing methods in each of these materials that makes this text so useful....Students will find this an essential support text to the Codes of Practice in their study of element sizing'.

  7. Atoms, molecules & elements

    CERN Document Server

    Graybill, George

    2007-01-01

    Young scientists will be thrilled to explore the invisible world of atoms, molecules and elements. Our resource provides ready-to-use information and activities for remedial students using simplified language and vocabulary. Students will label each part of the atom, learn what compounds are, and explore the patterns in the periodic table of elements to find calcium (Ca), chlorine (Cl), and helium (He) through hands-on activities.

  8. Intrusion detection system elements

    International Nuclear Information System (INIS)

    Eaton, M.J.; Mangan, D.L.

    1980-09-01

    This report highlights elements required for an intrusion detection system and discusses problems which can be encountered in attempting to make the elements effective. Topics discussed include: sensors, both for exterior detection and interior detection; alarm assessment systems, with the discussion focused on video assessment; and alarm reporting systems, including alarm communication systems and dislay/console considerations. Guidance on careful planning and design of a new or to-be-improved system is presented

  9. Trace elements in adolescents

    OpenAIRE

    Barany, Ebba

    2002-01-01

    The major aim of the thesis was to monitor toxic and essential trace elements in a cohort of adolescents by blood and serum analyses, and describe the impact of different factors on the element concentrations. The adolescents were from the Swedish cities Uppsala and Trollhättan which represent different socioeconomic and environmental conditions, and were investigated at age 15 and 17. It was shown that an inductively coupled plasma mass spectrometry method was suitable for simultaneous deter...

  10. Novel porcine repetitive elements

    Directory of Open Access Journals (Sweden)

    Nonneman Dan J

    2006-12-01

    Full Text Available Abstract Background Repetitive elements comprise ~45% of mammalian genomes and are increasingly known to impact genomic function by contributing to the genomic architecture, by direct regulation of gene expression and by affecting genomic size, diversity and evolution. The ubiquity and increasingly understood importance of repetitive elements contribute to the need to identify and annotate them. We set out to identify previously uncharacterized repetitive DNA in the porcine genome. Once found, we characterized the prevalence of these repeats in other mammals. Results We discovered 27 repetitive elements in 220 BACs covering 1% of the porcine genome (Comparative Vertebrate Sequencing Initiative; CVSI. These repeats varied in length from 55 to 1059 nucleotides. To estimate copy numbers, we went to an independent source of data, the BAC-end sequences (Wellcome Trust Sanger Institute, covering approximately 15% of the porcine genome. Copy numbers in BAC-ends were less than one hundred for 6 repeat elements, between 100 and 1000 for 16 and between 1,000 and 10,000 for 5. Several of the repeat elements were found in the bovine genome and we have identified two with orthologous sites, indicating that these elements were present in their common ancestor. None of the repeat elements were found in primate, rodent or dog genomes. We were unable to identify any of the replication machinery common to active transposable elements in these newly identified repeats. Conclusion The presence of both orthologous and non-orthologous sites indicates that some sites existed prior to speciation and some were generated later. The identification of low to moderate copy number repetitive DNA that is specific to artiodactyls will be critical in the assembly of livestock genomes and studies of comparative genomics.

  11. About the element 118

    International Nuclear Information System (INIS)

    Mathis, A.

    2003-01-01

    In 1999 a team of researchers of the Lawrence Berkeley National Laboratory (LBNL) announced the discovery of the element 118. Several laboratories throughout the world tried to repeat the synthesis but in vain. In july 2002 LBNL authorities stated that the results that had led to the discovery had been forged by one of the physicists of the team. As a consequence the element 118 was removed from the Mendeleev classification table. (A.C.)

  12. The transuranium elements

    International Nuclear Information System (INIS)

    Seaborg, G.T.

    1983-01-01

    Following the synthesis and identification of the first transuranium element (neptunium, atomic number 93) in 1940, an additional 14 have been synthesized through neutron and charged particle (including heavy ion) irradiations. The recognition that numbers 93-103 should be placed in the periodic table as an actinide transition series made their identification possible. It should be possible to discover elements beyond 107, perhaps even some in the ''superheavy'' group. (author)

  13. Nuclear fuel element

    International Nuclear Information System (INIS)

    Penrose, R.T.; Thompson, J.R.

    1976-01-01

    A method of protecting the cladding of a nuclear fuel element from internal attack and a nuclear fuel element for use in the core of a nuclear reactor are disclosed. The nuclear fuel element has disposed therein an additive of a barium-containing material and the barium-containing material collects reactive gases through chemical reaction or adsorption at temperatures ranging from room temperature up to fuel element plenum temperatures. The additive is located in the plenum of the fuel element and preferably in the form of particles in a hollow container having a multiplicity of gas permeable openings in one portion of the container with the openings being of a size smaller than the size of the particles. The openings permit gases and liquids entering the plenum to contact the particles. The additive is comprised of elemental barium or a barium alloy containing one or more metals in addition to barium such as aluminum, zirconium, nickel, titanium and combinations thereof. 6 claims, 3 drawing figures

  14. Solar energy - design element

    International Nuclear Information System (INIS)

    Sudimac, Budimir S.; Dubljevic, Andjela N.

    2015-01-01

    The main focus of this study is the theoretical examination of the possibilities of applying technological, functional, aesthetic and energy resources in elements of urban design. Designed solutions are treated as part of the overall optimization of architectural elements and urban space, in which technological development enables the use of certain energy potentials of elements of urban design. The paper presents student hypothetical design models of urban architectural elements with integrated photovoltaic modules. The analytical procedure was applied in the analysis of student work in a seminar of the first year of master studies at the Faculty of Architecture. The aim is to improve students' awareness of the need for proper handling of energy and the possibility of integration with other architectural elements. The research and the results have enabled further work on the sustainable development of architectural elements with a focus on the use of solar energy by promoting the modern design approach. Key words: PV module, teaching, solar energy, urban design

  15. Nuclear fuel element

    Science.gov (United States)

    Zocher, Roy W.

    1991-01-01

    A nuclear fuel element and a method of manufacturing the element. The fuel element is comprised of a metal primary container and a fuel pellet which is located inside it and which is often fragmented. The primary container is subjected to elevated pressure and temperature to deform the container such that the container conforms to the fuel pellet, that is, such that the container is in substantial contact with the surface of the pellet. This conformance eliminates clearances which permit rubbing together of fuel pellet fragments and rubbing of fuel pellet fragments against the container, thus reducing the amount of dust inside the fuel container and the amount of dust which may escape in the event of container breach. Also, as a result of the inventive method, fuel pellet fragments tend to adhere to one another to form a coherent non-fragmented mass; this reduces the tendency of a fragment to pierce the container in the event of impact.

  16. Creativity Management Key Elements

    Directory of Open Access Journals (Sweden)

    Rosa María Fuchs Ángeles

    2015-09-01

    Full Text Available Organizations are constantly looking towards innovation. In order to reach it they must foment creativity. This paper analyzes a series of elements considered in the organizational creativity management and proposes a model with the indispensable factors that organizations should consider to reach it. These elements are: culture and organizational environment, strategy, structure, communication, relation with customers, human resources (recruiting, training, job design, compensation, promotion, and performance evaluation, long term orientation and the organizational life cycle. Having the analysis of those elements as a basis, the indispensable pillars on management creativity are identified. The proposed model is based on 5 pillars: the alignment between strategic, culture and organizational structure, called by the authors 'Holy Trinity'; intern publicity; customer’s voice; recognition and a look towards future. Finally, the case of an innovative Peruvian enterprise is presented from the model’s perspective and the study conclusions.

  17. Fuel Element Technical Manual

    Energy Technology Data Exchange (ETDEWEB)

    Burley, H.H. [ed.

    1956-08-01

    It is the purpose of the Fuel Element Technical Manual to Provide a single document describing the fabrication processes used in the manufacture of the fuel element as well as the technical bases for these processes. The manual will be instrumental in the indoctrination of personnel new to the field and will provide a single data reference for all personnel involved in the design or manufacture of the fuel element. The material contained in this manual was assembled by members of the Engineering Department and the Manufacturing Department at the Hanford Atomic Products Operation between the dates October, 1955 and June, 1956. Arrangement of the manual. The manual is divided into six parts: Part I--introduction; Part II--technical bases; Part III--process; Part IV--plant and equipment; Part V--process control and improvement; and VI--safety.

  18. Finite elements and approximation

    CERN Document Server

    Zienkiewicz, O C

    2006-01-01

    A powerful tool for the approximate solution of differential equations, the finite element is extensively used in industry and research. This book offers students of engineering and physics a comprehensive view of the principles involved, with numerous illustrative examples and exercises.Starting with continuum boundary value problems and the need for numerical discretization, the text examines finite difference methods, weighted residual methods in the context of continuous trial functions, and piecewise defined trial functions and the finite element method. Additional topics include higher o

  19. Chemistry of rare elements

    International Nuclear Information System (INIS)

    Tananaev, I.V.

    1988-01-01

    The main directions of the research in the field of rare element chemistry (mainly rare earths, as well as In, U, Th, V, Nb, Ta, Mo, W) carried out for the recent decade in the laboratory of chemistry of rare elements and inorganic polymers of the USSR Academy of Sciences Institute, of General and Inorganic Chemistry (IGIC) are reviewed. The research of synthesis, structure and properties of rare earth phosphites, phoshates, arsenates, selenates, selenites and borates, as well as rare earth compounds with mixed oxide anions is of great importance. The fields of practical application of these compounds in view of their unique properties are noted

  20. Archaeal extrachromosomal genetic elements

    DEFF Research Database (Denmark)

    Wang, Haina; Peng, Nan; Shah, Shiraz Ali

    2015-01-01

    SUMMARY: Research on archaeal extrachromosomal genetic elements (ECEs) has progressed rapidly in the past decade. To date, over 60 archaeal viruses and 60 plasmids have been isolated. These archaeal viruses exhibit an exceptional diversity in morphology, with a wide array of shapes, such as spind......SUMMARY: Research on archaeal extrachromosomal genetic elements (ECEs) has progressed rapidly in the past decade. To date, over 60 archaeal viruses and 60 plasmids have been isolated. These archaeal viruses exhibit an exceptional diversity in morphology, with a wide array of shapes...

  1. Elements of social security

    DEFF Research Database (Denmark)

    Hansen, Hans

    Elements of Social Security is a comparative study of important elements of the social security systems in Denmark (DK), Sweden (S), Finland (FIN), Austria (A), Germany (D), the Netherlands (NL), Great Britain (GB) and Canada (CAN). It should be emphasized that Germany is the former West Germany...... (Alte Länder). This is the 9th and last edition of the publication,covering income levels and rules for social security and personal taxation for 1999. Basis for the projections to 1999 income levels is the 1998 data (in some cases 1999 data)for OECD's Taxing Wages as reported by national experts....

  2. Bibliography on transuranium elements

    International Nuclear Information System (INIS)

    Sood, D.D.

    1991-01-01

    A selective bibliography of prominent publications on transuranium elements is compiled. Heading papers, symposia proceedings and the textbooks are included in the bibliography. The bibliography is arranged under the headings: (1)Books, Symposia Proceedings, Reviews etc., (2)Discovery, (3)Weighable Isolation, (4)Metal Preparation, (5)Nuclear Properties, (6)Plutonium as Reactor Fuel, (7)Fuel Reprocessing, (8)Solid State Chemistry, Thermochemistry and Spectroscopy, (9)Radiation Safety, (10)Applications, and (11)Some Typical Indian Papers. Total number of references cited are 298. The bibliography, though selective, will serve as a starting point for comprehensive literature search on transuranium elements. (author)

  3. Elements of linear space

    CERN Document Server

    Amir-Moez, A R; Sneddon, I N

    1962-01-01

    Elements of Linear Space is a detailed treatment of the elements of linear spaces, including real spaces with no more than three dimensions and complex n-dimensional spaces. The geometry of conic sections and quadric surfaces is considered, along with algebraic structures, especially vector spaces and transformations. Problems drawn from various branches of geometry are given.Comprised of 12 chapters, this volume begins with an introduction to real Euclidean space, followed by a discussion on linear transformations and matrices. The addition and multiplication of transformations and matrices a

  4. CONSTRUCTION OF NUCLEAR FUEL ELEMENTS

    Science.gov (United States)

    Weems, S.J.

    1963-09-24

    >A rib arrangement and an end construction for nuclearfuel elements laid end to end in a coolant tube are described. The rib arrangement is such that each fuel element, when separated from other fuel elements, fits loosely in the coolant tube and so can easily be inserted or withdrawn from the tube. The end construction of the fuel elements is such that the fuel elements when assembled end to end are keyed against relative rotation, and the ribs of each fuel element cooperate with the ribs of the adjacent fuel elements to give the assembled fuel elements a tight fit with the coolant tube. (AEC)

  5. Water, the intangible element

    NARCIS (Netherlands)

    Schotting, R.J.

    2009-01-01

    Water is the key to life. No living creature can survive without water. Too much water or polluted water are serious threats to mankind. Managing this intangible element is complex, not only in wet deltaic regions but also in the (semi-)arid regions of the world. Combined efforts of the

  6. Improved nuclear fuel element

    International Nuclear Information System (INIS)

    Gordon, G.M.; Cowan, R.L. II; Davies, J.H.

    1975-01-01

    A nuclear fuel element is described. It includes a central nuclear fuel core and a composite cladding composed of a substrate, the inner face of which is coated with copper, nickel, iron or one of their alloys. The nuclear fuel is selected from uranium compounds, plutonium compounds or mixtures thereof. The substrate is selected from zirconium and zirconium alloys [fr

  7. Elements of Chemistry

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 17; Issue 1. Elements of Chemistry. Antoine-Laurent Lavoisier. Classics Volume 17 Issue 1 January 2012 pp 92-100. Fulltext. Click here to view fulltext PDF. Permanent link: http://www.ias.ac.in/article/fulltext/reso/017/01/0092-0100. Author Affiliations.

  8. TABLE OF RADIOACTIVE ELEMENTS.

    Energy Technology Data Exchange (ETDEWEB)

    HOLDEN,N.E.

    2001-06-29

    For those chemical elements which have no stable nuclides with a terrestrial isotopic composition, the data on radioactive half-lives and relative atomic masses for the nuclides of interest and importance have been evaluated and the recommended values and uncertainties are listed.

  9. Plants' essential chemical elements

    Science.gov (United States)

    Kevin T. Smith

    2007-01-01

    Every garden center and hardware store sells fertilizer guaranteed to "feed" plants. In a strict sense, we can't feed plants. Food contains an energy source. Green plants capture solar energy and make their own food through photosynthesis! Photosynthesis and other metabolic processes require chemical elements in appropriate doses for plants to survive...

  10. The elements of life

    Directory of Open Access Journals (Sweden)

    Sergey P. Fedotov

    2016-11-01

    Full Text Available Article "Elements of Life" offers a hypothesis about the relationship of the phenomenon of traditional Chinese medicine with the physical laws. It shows the principle of forming a sequence of daily activity of the acupuncture meridians as a consequence of the Doppler effect in the process of flowing around the planet Earth by cosmic wind (by Ether. In accordance with this specification the daily structure of meridians had been built. It is suggested that the essence of the Chinese Qi (Chi are vibrations of a certain range in the medium. Consequently, it became possible to set the interrelation of frequencies of the visible spectrum with certain meridians. It is shown that the topological relationship of ancient (barrier points of the Five Elements (Wu-Shu points are associated with the wave lengths of the so-called Qi. It is shown also that the essence of the Wu-Xing law is based on daily circulation patterns of meridians. The examples of the surrounding world, including pulses processes in the human body, are confirming the above mentioned theses. A correlation diagram between the main elements by Dr. Samohotsky A.S. (dissertation "The experience of the definition of medical laws", 1946 and the Five Elements of traditional Chinese philosophy is established. The above represented hypotheses are yet introduced in practice in form of pulse spectral analysis system.

  11. Inside finite elements

    CERN Document Server

    Weiser, Martin

    2016-01-01

    All relevant implementation aspects of finite element methods are discussed in this book. The focus is on algorithms and data structures as well as on their concrete implementation. Theory is covered as far as it gives insight into the construction of algorithms. Throughout the exercises a complete FE-solver for scalar 2D problems will be implemented in Matlab/Octave.

  12. Elements of Architecture

    DEFF Research Database (Denmark)

    Elements of Architecture explores new ways of engaging architecture in archaeology. It conceives of architecture both as the physical evidence of past societies and as existing beyond the physical environment, considering how people in the past have not just dwelled in buildings but have existed...

  13. Elemente einer Soziolinguistik Nordafrikas

    African Journals Online (AJOL)

    Elemente einer Soziolinguistik Nordafrikas. 43. Arbeitsgebiet der klassischen Afrikanistik, die als solche allerdings auf deutsche und einige europäische Lehr- und Forschungseinrichtungen beschränkt ist und in deren geographischem. Fokus zudem zumeist das sog. subsaharische Afrika liegt; man vgl. auch das jüngere.

  14. Beam transport elements

    CERN Multimedia

    CERN PhotoLab

    1965-01-01

    Two of the beam transport elements for the slow ejection system. On the left, a quadrupole 1.2 m long with a 5 cm aperture, capable of producing a gradient of 5000 gauss. On the right, a 1 m bending magnet with a 4 cm gap; its field is 20 000 gauss.

  15. Epidemiology and trace elements.

    Science.gov (United States)

    Elwood, P C

    1985-08-01

    Basically, epidemiology is the making of measurements of known reproducibility, in a bias-free manner, on representative samples of subjects drawn from defined communities. Epidemiology has become a relatively precise science and its value in medicine is widely appreciated. So too are its limitations: the difficulties in achieving a high response rate, in identifying and controlling confounding factors in the examination of an association, and the ultimate difficulties in distinguishing causation from association. While the value of community-based studies seems to be recognized by those interested in man and his environment, the need for the strict application of epidemiological procedures, and the limitations imposed on conclusions drawn from studies in which these procedures have been compromised, does not seem to be adequately understood. There are certain known links between trace elements in the environment and disease: for example the level of iodine in soil and water and the prevalence of goitre; the level of fluoride in water and the prevalence of dental caries. The investigation of other possible associations is difficult for a number of reasons, including interrelationships between trace elements, confounding of trace element levels (and disease) with social and dietary factors, and the probability that relationships are generally weak. Two conditions in which associations are likely are cardiovascular disease and cancer. Despite research along a number of lines, the relevance of trace elements to cardiovascular disease is not clear, and certainly the apparent association with hardness of domestic water supply seems unlikely to be causal. The same general conclusion seems reasonable for cancer, and although there are a very few well established associations which are likely to be causal, such as exposure to arsenic and skin cancer, the role of trace elements is obscure, and likely to be very small.

  16. Elements of quantum optics

    CERN Document Server

    Meystre, Pierre

    2007-01-01

    Elements of Quantum Optics gives a self-contained and broad coverage of the basic elements necessary to understand and carry out research in laser physics and quantum optics, including a review of basic quantum mechanics and pedagogical introductions to system-reservoir interactions and to second quantization. The text reveals the close connection between many seemingly unrelated topics, such as probe absorption, four-wave mixing, optical instabilities, resonance fluorescence and squeezing. It also comprises discussions of cavity quantum electrodynamics and atom optics. The 4th edition includes a new chapter on quantum entanglement and quantum information, as well as added discussions of the quantum beam splitter, electromagnetically induced transparency, slow light, and the input-output formalism needed to understand many problems in quantum optics. It also provides an expanded treatment of the minimum-coupling Hamiltonian and a simple derivation of the Gross-Pitaevskii equation, an important gateway to rese...

  17. Periodic table of elements

    International Nuclear Information System (INIS)

    Fluck, E.; Heumann, K.G.

    1985-01-01

    Following a recommendation by the International Union for Pure and Applied Chemistry (IUPAC), the groups of the periodic table shall be numbered from 1 to 18, instead of I to VIII as before. The recommendations has been approved of by the Committee on Nomenclature of the American Chemical Society. The new system abandons the distinction between main groups (a) and auxiliary groups (b), which in the past frequently has been the reason for misunderstandings between European and American chemists, due to different handling. The publishing house VCH Verlagsgesellschaft recently produced a new periodic table that shows the old and the new numbering system together at a glance, so that chemists will have time to get familiar with the new system. In addition the new periodic table represents an extensive data compilation arranged by elements. The front page lists the chemical properties of elements, the back page their physical properties. (orig./EF) [de

  18. Nuclear fuel element

    International Nuclear Information System (INIS)

    1974-01-01

    A nuclear fuel element for use in the core of a nuclear reactor is disclosed. A heat conducting fission product retaining metal liner of a refractory metal is incorporated in the fuel element between the cladding and the nuclear fuel to inhibit mechanical interaction between the nuclear fuel and the cladding, to isolate fission products and nuclear fuel impurities from contacting the cladding, and to improve the axial thermal peaking gradient along the length of the fuel rod. The metal liner can be in the form of a tube or hollow cylindrical column, a foil of single or multiple layers in the shape of a hollow cylindrical column, or a coating on the internal surface of the cladding. Preferred refractory metal materials are molybdenum, tungsten, rhenium, niobium and alloys of the foregoing metals

  19. Volume elements and torsion

    Science.gov (United States)

    Mosna, Ricardo A.; Saa, Alberto

    2005-11-01

    We reexamine here the issue of consistency of minimal action formulation with the minimal coupling procedure (MCP) in spaces with torsion. In Riemann-Cartan spaces, it is known that a proper use of the MCP requires that the trace of the torsion tensor be a gradient, Tμ=∂μθ, and that the modified volume element τθ=eθ√g dx1∧⋯∧dxn be used in the action formulation of a physical model. We rederive this result here under considerably weaker assumptions, reinforcing some recent results about the inadequacy of propagating torsion theories of gravity to explain the available observational data. The results presented here also open the door to possible applications of the modified volume element in the geometric theory of crystalline defects.

  20. Nuclear reactor fuel element

    International Nuclear Information System (INIS)

    D'Eye, R.W.M.; Shennan, J.V.; Ford, L.H.

    1977-01-01

    Fuel element with particles from ceramic fissionable material (e.g. uranium carbide), each one being coated with pyrolitically deposited carbon and all of them being connected at their points of contact by means of an individual crossbar. The crossbar consists of silicon carbide produced by reaction of silicon metal powder with the carbon under the influence of heat. Previously the silicon metal powder together with the particles was kneaded in a solvent and a binder (e.g. epoxy resin in methyl ethyl ketone plus setting agent) to from a pulp. The reaction temperature lies at 1750 0 C. The reaction itself may take place in a nitrogen atmosphere. There will be produced a fuel element with a high overall thermal conductivity. (DG) [de

  1. Radiolabeled cellular blood elements

    International Nuclear Information System (INIS)

    Thakur, M.L.; Ezikowitz, M.D.; Hardeman, M.R.

    1985-01-01

    This book contains papers delivered by guest lectures and participants at the Advanced Study Institute's colloquium on Radiolabeled Cellular Blood Elements at Maratea, Italy on August 29, to September 9, 1982. The book includes chapters on basic cell physiology and critical reviews of data and experience in the preparation and use of radiolabeled cells, as well as reports on very recent developments, from a faculty that included experts on cell physiology in health and disease and on the technology of in vivo labeling

  2. Improved nuclear fuel element

    International Nuclear Information System (INIS)

    Gordon, G.M.; Cowan, R.L. II.

    1975-01-01

    A nuclear fuel element is described. It includes a central nuclear fuel core and a composite cladding, composed of a substrate with two coatings on its inner face, the first coating being a diffusion barrier and the second a metal coating. The metal coating is in copper, nickel or iron. The substrate is a zirconium alloy. The diffusion barrier is in chromium or chromium alloy. The nuclear fuel is a uranium or plutonium compound or a mixture of both [fr

  3. Nuclear reactor fuel element

    International Nuclear Information System (INIS)

    1987-01-01

    A fuel element of a PWR has a deflector projection outside on the intermediate strip of the spacer to avoid hooking up during fuelling and fuel removal, which is placed in the direction of the diagonals of the corner grid mesh between the two outer bars on the intermediate strip and is oblique to the two ends of the intermediate strip in the longitudinal direction of the bars. (orig./HP) [de

  4. COLOR- SENSITIZED SOLAR ELEMENTS

    OpenAIRE

    Gish R. A.; Ranabkhat K.; Yatsenko A. N.

    2016-01-01

    Photovoltaic devices are a promising solution to the energy crisis, because they generate electricity directly from sunlight, without producing CO2. While color-sensitized batteries are the most studied element, mainly due to its low cost and high efficiency solar energy conversion into electricity. Until recently, the color-sensitized solar cells performance was less than 1%, however, the use of titanium dioxide as the anode material have greatly raised their efficiency. The advantages of ti...

  5. Nuclear reactor fuel elements

    International Nuclear Information System (INIS)

    Butterfield, C.E.; Waite, E.

    1982-01-01

    A nuclear reactor fuel element comprising a column of vibration compacted fuel which is retained in consolidated condition by a thimble shaped plug. The plug is wedged into gripping engagement with the wall of the sheath by a wedge. The wedge material has a lower coefficient of expansion than the sheath material so that at reactor operating temperature the retainer can relax sufficient to accommodate thermal expansion of the column of fuel. (author)

  6. Elements of Social Security

    DEFF Research Database (Denmark)

    Hansen, Hans

    Elements of Social Security contains an overview of important benefit schemes in Denmark, Sweden, Finland, Austria, Germany, the Netherlands, Great Britain and Canada. The schemes are categorized according to common sets of criteria and compared. Stylized cases illustrate the impact on disposable...... income of different ‘events’ such as illness, unemployment, disability and retirement. Maternity benefits and family allowances are also included. The information is up-dated on an annual basis, that of this 8th edition is for 1998....

  7. Elements of Social Security

    DEFF Research Database (Denmark)

    Hansen, Hans

    Elements of Social Security contains an overview of important benefit schemes in Denmark, Sweden, Finland, Germany, Great Britain, the Netherlands and Canada. The schemes are categorized according to common sets of criteria and compared. Stylized cases illustrate the impact on disposable income...... of different "events" such as illness, unemployment, injuries from work and retirement. Maternity benefits and family allowances are also included. The information of the 6th edition is for 1996. The contents are updated on an annual basis....

  8. Elements of Social Security

    DEFF Research Database (Denmark)

    Hansen, Hans

    Elements of Social Security contains an overview of important benefit schemes in Denmark, Sweden, Finland, Germany, the Netherlands, Great Britain and Canada. The schemes are categorized according to common sets of criteria and compared. Stylized cases illustrate the impact on disposable income...... of different 'events' such as illness, unemployment, disability and retirement. Maternity benefits and family allowances are also included. The information is up-dated on an annual basis, that of this 7th edition is for 1997....

  9. New functionalities in abundant element oxides: ubiquitous element strategy

    International Nuclear Information System (INIS)

    Hosono, Hideo; Hayashi, Katsuro; Kamiya, Toshio; Atou, Toshiyuki; Susaki, Tomofumi

    2011-01-01

    While most ceramics are composed of ubiquitous elements (the ten most abundant elements within the Earth's crust), many advanced materials are based on rare elements. A 'rare-element crisis' is approaching owing to the imbalance between the limited supply of rare elements and the increasing demand. Therefore, we propose a 'ubiquitous element strategy' for materials research, which aims to apply abundant elements in a variety of innovative applications. Creation of innovative oxide materials and devices based on conventional ceramics is one specific challenge. This review describes the concept of ubiquitous element strategy and gives some highlights of our recent research on the synthesis of electronic, thermionic and structural materials using ubiquitous elements. (topical review)

  10. Chemical Elements Bingo

    Science.gov (United States)

    Tejeda, Silvia; Palacios, Joaquin

    1995-12-01

    An important part of the high school chemistry program is the topic of periodic classification and periodicity. We have observed that one of the obstacles for the study of the matter is the new vocabulary necessary to initiate this work. Our students have to understand that the periodic classification is an orderly way of presenting the elements and its properties, they compare the table with other classification systems that they already know, nevertheless for the average student it is difficult to deduce or predict properties with periodic classification. As an example of this concept, we can point out the electronic configuration, atomic radii, oxidation state, and valence number. In order to facilitate the learning-teaching process of this topic in high school level, we stimulate the class to play with the periodic table, to get familiar with the general concepts of periodicity. We started our work dealing with the most common elements in each group. Chemical Elements Bingo (CEB) is a game we designed to teach periodic classification.

  11. Helium the disappearing element

    CERN Document Server

    Sears, Wheeler M

    2015-01-01

    The subject of the book is helium, the element, and its use in myriad applications including MRI machines, particle accelerators, space telescopes, and of course balloons and blimps. It was at the birth of our Universe, or the Big Bang, where the majority of cosmic helium was created; and stellar helium production continues. Although helium is the second most abundant element in the Universe, it is actually quite rare here on Earth and only exists because of radioactive elements deep within the Earth. This book includes a detailed history of the discovery of helium, of the commercial industry built around it, how the helium we actually encounter is produced within the Earth, and the state of the helium industry today. The gas that most people associate with birthday party balloons is running out. “Who cares?” you might ask. Well, without helium, MRI machines could not function, rockets could not go into space, particle accelerators such as those used by CERN could not operate, fiber optic cables would not...

  12. Elements of quantum information

    International Nuclear Information System (INIS)

    Schleich, W.P.

    2007-01-01

    Elements of Quantum Information introduces the reader to the fascinating field of quantum information processing, which lives on the interface between computer science, physics, mathematics, and engineering. This interdisciplinary branch of science thrives on the use of quantum mechanics as a resource for high potential modern applications. With its wide coverage of experiments, applications, and specialized topics - all written by renowned experts - Elements of Quantum Information provides and indispensable, up-to-date account of the state of the art of this rapidly advancing field and takes the reader straight up to the frontiers of current research. The articles have first appeared as a special issue of the journal 'Fortschritte der Physik / Progress of Physics'. Since then, they have been carefully updated. The book will be an inspiring source of information and insight for anyone researching and specializing in experiments and theory of quantum information. Topics addressed in Elements of Quantum Information include - Cavity Quantum Electrodynamics - Segmented Paul Traps - Cold Atoms and Bose-Einstein Condensates in Microtraps, Optical Lattices, and on Atom Chips - Rydberg Gases - Factorization of Numbers with Physical Systems - Entanglement of Continuous Variables - NMR and Solid State Quantum Computation - Quantum Algorithms and Quantum Machines - Complexity Theory - Quantum Crytography. (orig.)

  13. Using Finite Element Method

    Directory of Open Access Journals (Sweden)

    M.H.R. Ghoreishy

    2008-02-01

    Full Text Available This research work is devoted to the footprint analysis of a steel-belted radial tyre (185/65R14 under vertical static load using finite element method. Two models have been developed in which in the first model the tread patterns were replaced by simple ribs while the second model was consisted of details of the tread blocks. Linear elastic and hyper elastic (Arruda-Boyce material models were selected to describe the mechanical behavior of the reinforcing and rubbery parts, respectively. The above two finite element models of the tyre were analyzed under inflation pressure and vertical static loads. The second model (with detailed tread patterns was analyzed with and without friction effect between tread and contact surfaces. In every stage of the analysis, the results were compared with the experimental data to confirm the accuracy and applicability of the model. Results showed that neglecting the tread pattern design not only reduces the computational cost and effort but also the differences between computed deformations do not show significant changes. However, more complicated variables such as shape and area of the footprint zone and contact pressure are affected considerably by the finite element model selected for the tread blocks. In addition, inclusion of friction even in static state changes these variables significantly.

  14. The transuranium elements: From neptunium and plutonium to element 112

    International Nuclear Information System (INIS)

    Hoffman, D.C.

    1996-01-01

    Beginning in the 1930's, both chemists and physicists became interested in synthesizing new artificial elements. The first transuranium element, Np, was synthesized in 1940. Over the past six decades, 20 transuranium elements have been produced. A review of the synthesis is given. The procedure of naming the heavy elements is also discussed. It appears feasible to produce elements 113 and 114. With the Berkeley Gas-filled Separator, it should be possible to reach the superheavy elements in the region of the spherical Z=114 shell, but with fewer neutrons than the N=184 spherical shell. 57 refs, 6 figs

  15. Elemental matrices for the finite element method in electromagnetics with quadratic triangular elements

    OpenAIRE

    Cojocaru, E.

    2009-01-01

    The finite element method has become a preeminent simulation technique in electromagnetics. For problems involving anisotropic media and metamaterials, proper algorithms should be developed. It has been proved that discretizing in quadratic triangular elements may lead to an improved accuracy. Here we present a collection of elemental matrices evaluated analytically for quadratic triangular elements. They could be useful for the finite element method in advanced electromagnetics.

  16. Transuranium elements: A half century

    International Nuclear Information System (INIS)

    Seaborg, G.T.

    1990-01-01

    Neutron irradiation of uranium, beginning in 1934, led to the reported discovery of such transuranium elements as eka-rhenium, etc. After a few years of investigation these were correctly identified, in December 1938, as fission products. The first real transuranium elements, with atomic numbers 93 and 94 (neptunium and plutonium) were discovered in 1940-1941. Not until it was recognized that transuranium elements should be part of a 14-member actinide series could elements 95 and 95 (americium and curium) be chemically identified following their nuclear synthesis. This new view was the key to the synthesis and identification of the next seven transuranium elements, resulting in the completion of the actinide series at element 103 in 1961. The transactinide elements could, according to the actinide concept, also be correctly placed in the Periodic Table and the chemical properties of the first transactinide elements, elements 104 and 105 (rutherfordium and hahnium), confirm this point of view

  17. Elements of social action

    Directory of Open Access Journals (Sweden)

    Marjanović Miloš

    2011-01-01

    Full Text Available Because of the significant analytical advantages, the author prefers social action as initial sociological concept in the relation to social phenomenon. Its basic elements are: actors, subjects and tools, needs and interests, values and norms, positions and roles. Actors set in motion and unify the rest of elements, guide to the magic triangle of sociology (movement, change, order, reaffirm actor paradigm to systemic paradigm. Subjects and tools materialize an action and its overestimate results in technological determinism or (by means of property as institutional appropriation of nature in the (unclassed historical type of society. Needs and interests are the basis of person's motivation and starting point for depth analysis of sociability. The expansion of legitimate interests circle develops techniques of normative regulation. Values and norms guide to institutional-organizational, positions to vertical and roles to horizontal structure. Values give the meaning to the action as well as to human existence, they are orientations of motivate system of personality but also basic aspect of society. As abstractions, values are latent background of norms and they tell to us what to do, and norms how to do something. Norms are specified instructions for suitable behavior Without normative order, not to be possible the satisfying of needs and the conciliation of interests. Riches, power and prestige are components of social position, and legal status is the determination of rights and obligations of the position. Roles are normative expectation of behavior. Toward kinds of sanctions roles are classified. Roles but also other elements of social action are starting point for sociological analysis of legal norms and institutes. On the other side, the observation of legal component of social actions enriches, strengths and precises sociological analysis of them.

  18. Nuclear reactor fuel elements

    International Nuclear Information System (INIS)

    Hindle, E. D.

    1984-01-01

    An array of rods is assembled to form a fuel element for a pressurized water reactor, the rods comprising zirconium alloy sheathed nuclear fuel pellets and containing helium. The helium gas pressure is selected for each rod so that it differs substantially from the helium gas pressure in its closest neighbors. In a preferred arrangement the rods are arranged in a square lattice and the helium gas pressure alternates between a relatively high value and a relatively low value so that each rod has as its closest neighbors up to four rods containing helium gas at the other pressure value

  19. Nuclear reactor fuel elements

    Energy Technology Data Exchange (ETDEWEB)

    Hindle, E. D.

    1984-10-16

    An array of rods is assembled to form a fuel element for a pressurized water reactor, the rods comprising zirconium alloy sheathed nuclear fuel pellets and containing helium. The helium gas pressure is selected for each rod so that it differs substantially from the helium gas pressure in its closest neighbors. In a preferred arrangement the rods are arranged in a square lattice and the helium gas pressure alternates between a relatively high value and a relatively low value so that each rod has as its closest neighbors up to four rods containing helium gas at the other pressure value.

  20. Elements of differential topology

    CERN Document Server

    Shastri, Anant R

    2011-01-01

    Derived from the author's course on the subject, Elements of Differential Topology explores the vast and elegant theories in topology developed by Morse, Thom, Smale, Whitney, Milnor, and others. It begins with differential and integral calculus, leads you through the intricacies of manifold theory, and concludes with discussions on algebraic topology, algebraic/differential geometry, and Lie groups.The first two chapters review differential and integral calculus of several variables and present fundamental results that are used throughout the text. The next few chapters focus on smooth manifo

  1. Elements of Architecture

    DEFF Research Database (Denmark)

    Elements of Architecture explores new ways of engaging architecture in archaeology. It conceives of architecture both as the physical evidence of past societies and as existing beyond the physical environment, considering how people in the past have not just dwelled in buildings but have existed...... and affective impacts, of these material remains. The contributions in this volume investigate the way time, performance and movement, both physically and emotionally, are central aspects of understanding architectural assemblages. It is a book about the constellations of people, places and things that emerge...

  2. Nuclear reactor fuel element

    International Nuclear Information System (INIS)

    Lippert, H.J.

    1985-01-01

    The fuel element box for a BWR is situated with a corner bolt on the inside in one corner of its top on the top side of the top plate. This corner bolt is screwed down with a bolt with a corner part which is provided with leaf springs outside on two sides, where the bolt has a smaller diameter and an expansion shank. The bolt is held captive to the bolt head on the top and the holder on the bottom of the corner part. The holder is a locknut. If the expansion forces are too great, the bolt can only break at the expansion shank. (HP) [de

  3. Elements of real analysis

    CERN Document Server

    Sprecher, David A

    2010-01-01

    This classic text in introductory analysis delineates and explores the intermediate steps between the basics of calculus and the ultimate stage of mathematics: abstraction and generalization.Since many abstractions and generalizations originate with the real line, the author has made it the unifying theme of the text, constructing the real number system from the point of view of a Cauchy sequence (a step which Dr. Sprecher feels is essential to learn what the real number system is).The material covered in Elements of Real Analysis should be accessible to those who have completed a course in

  4. [Healthcare marketing elements].

    Science.gov (United States)

    Ameri, Cinzia; Fiorini, Fulvio

    2014-01-01

    Marketing puts its foundation on a few key concepts: need-demand, product-service, satisfaction, exchange, market, or business structure manufacturing / supply. The combination of these elements allows you to build an effective marketing strategy. Crucial in this respect is to remember the Porter matrix, which shows that for a correct analysis of the relevant market is necessary to refer to the "five forces at play", ie: customers, competitors, new entrants and substitutes threat. Another key lever for proper marketing oriented approach is the continuous and constant monitoring of the application, anticipating their dissatisfactions.

  5. Analytical elements of mechanics

    CERN Document Server

    Kane, Thomas R

    2013-01-01

    Analytical Elements of Mechanics, Volume 1, is the first of two volumes intended for use in courses in classical mechanics. The books aim to provide students and teachers with a text consistent in content and format with the author's ideas regarding the subject matter and teaching of mechanics, and to disseminate these ideas. The book opens with a detailed exposition of vector algebra, and no prior knowledge of this subject is required. This is followed by a chapter on the topic of mass centers, which is presented as a logical extension of concepts introduced in connection with centroids. A

  6. Optical Finite Element Processor

    Science.gov (United States)

    Casasent, David; Taylor, Bradley K.

    1986-01-01

    A new high-accuracy optical linear algebra processor (OLAP) with many advantageous features is described. It achieves floating point accuracy, handles bipolar data by sign-magnitude representation, performs LU decomposition using only one channel, easily partitions and considers data flow. A new application (finite element (FE) structural analysis) for OLAPs is introduced and the results of a case study presented. Error sources in encoded OLAPs are addressed for the first time. Their modeling and simulation are discussed and quantitative data are presented. Dominant error sources and the effects of composite error sources are analyzed.

  7. Osteoporosis and trace elements

    DEFF Research Database (Denmark)

    Aaseth, J.; Boivin, G.; Andersen, Ole

    2012-01-01

    More than 200 million people are affected by osteoporosis worldwide, as estimated by 2 million annual hip fractures and other debilitating bone fractures (vertebrae compression and Colles' fractures). Osteoporosis is a multi-factorial disease with potential contributions from genetic, endocrine...... in new bone and results in a net gain in bone mass, but may be associated with a tissue of poor quality. Aluminum induces impairment of bone formation. Gallium and cadmium suppresses bone turnover. However, exact involvements of the trace elements in osteoporosis have not yet been fully clarified...

  8. Elements of energy conversion

    CERN Document Server

    Russell, Charles R

    2013-01-01

    Elements of Energy Conversion brings together scattered information on the subject of energy conversion and presents it in terms of the fundamental thermodynamics that apply to energy conversion by any process. Emphasis is given to the development of the theory of heat engines because these are and will remain most important power sources. Descriptive material is then presented to provide elementary information on all important energy conversion devices. The book contains 10 chapters and opens with a discussion of forms of energy, energy sources and storage, and energy conversion. This is foll

  9. Heavy-element nucleosynthesis

    International Nuclear Information System (INIS)

    Mathews, G.J.

    1990-01-01

    New measurements and theoretical studies of nuclear properties, together with new astronomical data on the growth of heavy-element abundances during the early history of the Galaxy, now provide a clearer picture of where in nature the elements heavier than iron are produced by rapid (r-process) and show (s-process) neutron capture reactions. The nuclear data suggest that the r-process involves a high-neutron-density beta-flow equilibrium environment and that the s-process may have occurred at a temperature and neutron density consistent with a 13 C(α,n) 16 0 neutron source. The astronomical data, when compared with simple galactic chemical evolution modes, suggests that the r-process is associated with type II supernovae and that the neutron source must be manufactured by the star. Low-mass type II supernovae are proposed as the most important contributors to the r-process. A 13 C neutron source in intermediate-mass stars is proposed for the s-process. 64 refs., 7 figs

  10. Heavy-element nucleosynthesis

    Energy Technology Data Exchange (ETDEWEB)

    Mathews, G.J.

    1990-10-30

    New measurements and theoretical studies of nuclear properties, together with new astronomical data on the growth of heavy-element abundances during the early history of the Galaxy, now provide a clearer picture of where in nature the elements heavier than iron are produced by rapid (r-process) and show (s-process) neutron capture reactions. The nuclear data suggest that the r-process involves a high-neutron-density beta-flow equilibrium environment and that the s-process may have occurred at a temperature and neutron density consistent with a {sup 13}C({alpha},n){sup 16}0 neutron source. The astronomical data, when compared with simple galactic chemical evolution modes, suggests that the r-process is associated with type II supernovae and that the neutron source must be manufactured by the star. Low-mass type II supernovae are proposed as the most important contributors to the r-process. A {sup 13}C neutron source in intermediate-mass stars is proposed for the s-process. 64 refs., 7 figs.

  11. The CEBAF Element Database

    Energy Technology Data Exchange (ETDEWEB)

    Theodore Larrieu, Christopher Slominski, Michele Joyce

    2011-03-01

    With the inauguration of the CEBAF Element Database (CED) in Fall 2010, Jefferson Lab computer scientists have taken a step toward the eventual goal of a model-driven accelerator. Once fully populated, the database will be the primary repository of information used for everything from generating lattice decks to booting control computers to building controls screens. A requirement influencing the CED design is that it provide access to not only present, but also future and past configurations of the accelerator. To accomplish this, an introspective database schema was designed that allows new elements, types, and properties to be defined on-the-fly with no changes to table structure. Used in conjunction with Oracle Workspace Manager, it allows users to query data from any time in the database history with the same tools used to query the present configuration. Users can also check-out workspaces to use as staging areas for upcoming machine configurations. All Access to the CED is through a well-documented Application Programming Interface (API) that is translated automatically from original C++ source code into native libraries for scripting languages such as perl, php, and TCL making access to the CED easy and ubiquitous.

  12. NIH Common Data Elements Repository

    Data.gov (United States)

    U.S. Department of Health & Human Services — The NIH Common Data Elements (CDE) Repository has been designed to provide access to structured human and machine-readable definitions of data elements that have...

  13. REACTOR FUEL ELEMENTS TESTING CONTAINER

    Science.gov (United States)

    Whitham, G.K.; Smith, R.R.

    1963-01-15

    This patent shows a method for detecting leaks in jacketed fuel elements. The element is placed in a sealed tank within a nuclear reactor, and, while the reactor operates, the element is sparged with gas. The gas is then led outside the reactor and monitored for radioactive Xe or Kr. (AEC)

  14. Improved nuclear fuel element

    International Nuclear Information System (INIS)

    1974-01-01

    A nuclear fuel element for use in the core of a nuclear reactor is disclosed and has a metal liner disposed between the cladding and the nuclear fuel material and a high lubricity material in the form of a coating disposed between the liner and the cladding. The liner preferably has a thickness greater than the longest fission product recoil distance and is composed of a low neutron capture cross-section material. The liner is preferably composed of zirconium, an alloy of zirconium, niobium or an alloy of niobium. The liner serves as a preferential reaction site for volatile impurities and fission products and protects the cladding from contact and reaction with such impurities and fission products. The high lubricity material acts as an interface between the liner and the cladding and reduces localized stresses on the cladding due to fuel expansion and cracking of the fuel

  15. Heavy-element research

    International Nuclear Information System (INIS)

    Anon.

    1975-01-01

    The status is reported of studies on the solid-state chemistry of the actinides and lanthanides, spectroscopy of actinide compounds, and dynamic chemical description of actinide elements in solution. Phase studies were done on Rb 2 UO 4 , K 2 UO 4 , Li 2 UO 4 , and Es 2 U 2 O 7 . The lithium neptunate (VI) system was investigated and the existence of Li 2 NpO 4 was established. In oxidation-reduction studies it was shown that Am(III) can be electrolytically oxidized to Am(IV) in strong H 3 PO 4 , but Cf(III) and Pr(III) do not oxidize. The low-temperature absorption spectrum of thin films of NpBr 3 was investigated. (U.S.)

  16. ELEMENTAL FORMS OF HOSPITALITY

    Directory of Open Access Journals (Sweden)

    Maximiliano Emanuel Korstanje

    2010-11-01

    Full Text Available Modern studies emphasized on the needs of researching the hospitality as relevant aspects of tourism and hospitality fields. Anyway, these approaches are inextricably intertwined to the industry of tourism and do not take seriously the anthropological and sociological roots of hospitality. In fact, the hotel seems to be a partial sphere of hospitality at all. Under this context, the present paper explores the issue of hospitality enrooted in the political and economic indo-European principle of free-transit which is associated to a much broader origin.  Starting from the premise etymologically hostel and hospital share similar origins, we follow the contributions of J Derrida to determine the elements that formed the hospitality up to date.

  17. Ucla, escuela elemental

    Directory of Open Access Journals (Sweden)

    Neutra, Richard J.

    1962-03-01

    Full Text Available La Escuela Elemental de Preparación de la Universidad de California, en Los Angeles, está dedicada a la educación e investigación y preparación del profesorado de la infancia. Se ha construido en un paraje maravilloso, de frondosa vegetación, frente a un terreno bastante quebrado, circunstancia que presta mayor encanto al conjunto, construido con gran pericia y adaptación al paisaje a base de una dominante horizontalidad, con materiales sencillos (ladrillos, hierro y madera y gran comunicación con la naturaleza mediante grandes cristaleras correderas que ensanchan las clases y las suplementan hacia el jardín de acuerdo con las nuevas normas y prácticas docentes.

  18. Nuclear fuel element

    International Nuclear Information System (INIS)

    Hirama, H.

    1978-01-01

    A nuclear fuel element comprises an elongated tube having upper and lower end plugs fixed to both ends thereof and nuclear fuel pellets contained within the tube. The fuel pellets are held against the lower end plug by a spring which is supported by a setting structure. The setting structure is maintained at a proper position at the middle of the tube by a wedge effect caused by spring force exerted by the spring against a set of balls coacting with a tapered member of the setting structure thereby wedging the balls against the inner wall of the tube, and the setting structure is moved free by pushing with a push bar against the spring force so as to release the wedge effect

  19. Nuclear reactor fuel element

    International Nuclear Information System (INIS)

    Steinke, A.

    1985-01-01

    The grid-shaped spacer for PWR fuel elements consists of flat, upright metal bars at right angles to the fuel rods. In one corner of a grid mesh it has a spring with two end parts for the fuel rod. The cut-outs for the end parts start from an end edge of the metal bar parallel to the fuel rods. The transverse metal bar is one of four outer metal bars. Both end parts of the spring have an extension parallel to this outer metal arm, which grips a grid mesh adjacent to this grid mesh at the side in one corner of the spacer and forms an end part of a spring for the fuel rod there on the inside of the outer metal bar. (HP) [de

  20. Statistical finite element analysis.

    Science.gov (United States)

    Khalaji, Iman; Rahemifar, Kaamran; Samani, Abbas

    2008-01-01

    A novel technique is introduced for tissue deformation and stress analysis. Compared to the conventional Finite Element method, this technique is orders of magnitude faster and yet still very accurate. The proposed technique uses preprocessed data obtained from FE analyses of a number of similar objects in a Statistical Shape Model framework as described below. This technique takes advantage of the fact that the body organs have limited variability, especially in terms of their geometry. As such, it is well suited for calculating tissue displacements of body organs. The proposed technique can be applied in many biomedical applications such as image guided surgery, or virtual reality environment development where tissue behavior is simulated for training purposes.

  1. Accelerator vacuum system elements

    International Nuclear Information System (INIS)

    Sivokon', V.V.; Kobets, A.F.; Shvetsov, V.A.; Sivokon', L.V.

    1980-01-01

    Some elements of vacuum systems are investigated. Considerable attention has been given to the investigation into peculiarities in pumping out of a ionoguide for transportation of an accelerated charged particles beam the spread of which often attains a considerable length. The number of pumps over the ionoguide length is experimentally determined. It is shown that as a result of ionoguide warm-up the pumping out time is considerably reduced maximum permissible pressure is decreased by two orders and lesser rate of pump pumping out is required. The investigations have shown that when operating the ionoguide there is no necessity in setting up seals between the ionoguide and magnetodischarged pump. The causes of the phenomenon in which the pressure near the pump is greater than in the end of the ionoguide, are impurities carried in by the pump into the ionoguide volume and the pumping out capacity of the pressure converter

  2. RECONDITIONING FUEL ELEMENTS

    Science.gov (United States)

    Brandt, H.L.

    1962-02-20

    A process is given for decanning fuel elements that consist of a uranium core, an intermediate section either of bronze, silicon, Al-Si, and uranium silicide layers or of lead, Al-Si, and uranium silicide layers around said core, and an aluminum can bonded to said intermediate section. The aluminum can is dissolved in a solution of sodium hydroxide (9 to 20 wt%) and sodium nitrate (35 to 12 wt %), and the layers of the intermediate section are dissolved in a boiling sodium hydroxide solution of a minimum concentration of 50 wt%. (AEC) A method of selectively reducing plutonium oxides and the rare earth oxides but not uranium oxides is described which comprises placing the oxides in a molten solvent of zinc or cadmium and then adding metallic uranium as a reducing agent. (AEC)

  3. The fantastic four.. elements

    Science.gov (United States)

    Marsili, Antonella; D'Addezio, Giuliana; Rubbia, Giuliana; Ramieri, Caterina; Todaro, Riccardo; Scipilliti, Francesca; Tosto, Eleonora

    2015-04-01

    With a "Sunday between territory and music to 'National Institute of Geophysics and Volcanology," October 12, 2014 the headquarters of INGV Roma kicked off the activities of the second edition of the Week of Planet Earth. The laboratory of scientific outreach and museum activities together with volunteers of the National Civil Service have organized the whole day dedicated to the dissemination of earth sciences, involving adults and children. Especially for primary school children a laboratory was made involving three amusing activities all aimed at inspiring respect for the Earth: a theatrical representation called "The Fantastic 4... elements", a behavioral game and a nursery rhyme reading. The theater as a means of communication of science is an innovative and creative way to introduce children to important scientific concepts. The use of this methodology and simple language favoring the emotional involvement of the child facilitating learning. The main character is a child, chosen to facilitate the identification of the spectators with the protagonist, that through a fantastic journey discovers the importance of the four elements of our planet: earth, fire, air and water. As a second step, volunteers involved children in reading a nursery rhyme "the ABC to become a Friend of the Earth" inviting them to protect and respect the environment and its resources. Finally, the behavioral game gave indications about behaviors to adopt to safeguard the planet. Volunteers introduced a billboard divided into two colors, green to indicate the right behaviors and red for the wrong ones. Each child, after reading a card with indication on the behavior to adopt, had to decide if they were correct or not with respect to the environment safeguard. After listening to the children's answer, the volunteer gave the correct explanation about the appropriate behavior to adopt. At the end of the activities, each child received a certificate as "a friend of Planet Earth".

  4. Transplutonium elements - a literature survey

    International Nuclear Information System (INIS)

    Sivaramakrishnan, C.K.; Jadhav, A.V.

    1974-01-01

    The report surveys reported work on the discovery of transplutonium elements and their production through various methods like bombardment of heavy elements with charged ions, successive neutron captures on heavy elements in reactors and multiple neutron captures by heavy elements during nuclear explosions. Estimated yields of transplutonium elements in special targets irradiated in reactors, and also as byproducts from spent power reactor fuels are quoted. Various chemical procedures adopted for recovery of these elements from irradiated target and also from power reactor fuel reprocessing streams are described. A brief survey of shielded facilities available at various centres for transplutonium programmes is also included. Major uses of some of these heavy elements are described. (author)

  5. The Chemistry of Superheavy Elements

    CERN Document Server

    Schädel, M

    2003-01-01

    The chemistry of transactinide or superheavy elements has reached element 108. Preparations are under way to leap to element 112 and beyond. The current status of this atom-at-a-time chemical research and its future perspectives are reviewed from an experimental point of view together with some of the interesting results from n -rich nuclides near and at the N=162 neutron shell. Experimental techniques and important results enlightening typical chemical properties of elements 104 through 108 are presented in an exemplary way. From the results of these experiments it is justified to place these elements in the Periodic Table of the Elements in to groups 4 through 8, respectively. However, mainly due to the influence of relativistic effects, it is no longer possible to deduce detailed chemical properties of these superheavy elements simply from this position.

  6. Slave finite elements: The temporal element approach to nonlinear analysis

    Science.gov (United States)

    Gellin, S.

    1984-01-01

    A formulation method for finite elements in space and time incorporating nonlinear geometric and material behavior is presented. The method uses interpolation polynomials for approximating the behavior of various quantities over the element domain, and only explicit integration over space and time. While applications are general, the plate and shell elements that are currently being programmed are appropriate to model turbine blades, vanes, and combustor liners.

  7. Nuclear fuel element

    International Nuclear Information System (INIS)

    Armijo, J.S.

    1977-01-01

    A nuclear fuel element for use in the core of a nuclear reactor is disclosed which has a composite cladding having a substrate, a metal barrier metallurgically bonded to the inside surface of the substrate and an inner layer metallurgically bonded to the inside surface of the metal barrier. In this composite cladding, the inner layer and the metal barrier shield the substrate from any impurities or fission products from the nuclear fuel material held within the composite cladding. The metal barrier forms about 1 to about 4 percent of the thickness of the cladding and is comprised of a metal selected from the group consisting of niobium, aluminum, copper, nickel, stainless steel, and iron. The inner layer and then the metal barrier serve as reaction sites for volatile impurities and fission products and protect the substrate from contact and reaction with such impurities and fission products. The substrate and the inner layer of the composite cladding are selected from conventional cladding materials and preferably are a zirconium alloy. Also in a preferred embodiment the substrate and the inner layer are comprised of the same material, preferably a zirconium alloy. 19 claims, 2 figures

  8. Chemistry of transuranium elements

    International Nuclear Information System (INIS)

    Anon.

    1976-01-01

    The half-wave amalgamation potential of No (element 102) was determined. Studies on the preparation and properties of Cf are reported; previously reported results on Es were confirmed. The heat of solution of Bk was measured. Spectroscopic and x-ray diffraction studies of Es-253 bromides are reported. Salicylate complexes with Sm(III), Am(III), Th(IV), and U(IV)O 2 were prepared; crystal data are given. Results of studies on the effect of secondary bonds on the strength of O double bond Np double bond O bonds are reported. The M series x rays of Np were measured. Anomalous spin--orbit splitting of the 4f level in the actinide series is reported. Progress is reported in studies on the Cf oxide system for oxygen pressures up to 760 mm and temperatures between 25 and 1000 0 C, as well as structural parameters of transplutonium oxysulfates and oxysulfides and actinide and lanthanide hydroxides. The electron paramagnetic resonance spectrum of 253 Es 2+ was observed in the cubic monocrystal hosts BaF 2 and SrCl 2

  9. Chemistry of the superheavy elements.

    Science.gov (United States)

    Schädel, Matthias

    2015-03-13

    The quest for superheavy elements (SHEs) is driven by the desire to find and explore one of the extreme limits of existence of matter. These elements exist solely due to their nuclear shell stabilization. All 15 presently 'known' SHEs (11 are officially 'discovered' and named) up to element 118 are short-lived and are man-made atom-at-a-time in heavy ion induced nuclear reactions. They are identical to the transactinide elements located in the seventh period of the periodic table beginning with rutherfordium (element 104), dubnium (element 105) and seaborgium (element 106) in groups 4, 5 and 6, respectively. Their chemical properties are often surprising and unexpected from simple extrapolations. After hassium (element 108), chemistry has now reached copernicium (element 112) and flerovium (element 114). For the later ones, the focus is on questions of their metallic or possibly noble gas-like character originating from interplay of most pronounced relativistic effects and electron-shell effects. SHEs provide unique opportunities to get insights into the influence of strong relativistic effects on the atomic electrons and to probe 'relativistically' influenced chemical properties and the architecture of the periodic table at its farthest reach. In addition, they establish a test bench to challenge the validity and predictive power of modern fully relativistic quantum chemical models. © 2015 The Author(s) Published by the Royal Society. All rights reserved.

  10. Experimental Study of Elements Promoting Mixing in Fuel Elements

    International Nuclear Information System (INIS)

    Silin, Nicolas; Juanico, Luis; Delmastro, Dario

    2003-01-01

    In the present work a thermal tracing technique is used to measure the increase of the mixing between subchannels in the presence of different mixing elements.As representative elements a spacer, a spacer with mixing vanes and turbulence promoter buttons were considered.The performance of these elements was evaluated by studying the behavior of a thermal trace in each case.Also the pressure drop for each case is presented.The results present a qualitative and quantitative guide for the application of each one of these appendages in future nuclear elements

  11. NUCLEAR REACTOR FUEL ELEMENT ASSEMBLY

    Science.gov (United States)

    Stengel, F.G.

    1963-12-24

    A method of fabricating nuclear reactor fuel element assemblies having a plurality of longitudinally extending flat fuel elements in spaced parallel relation to each other to form channels is presented. One side of a flat side plate is held contiguous to the ends of the elements and a welding means is passed along the other side of the platertransverse to the direction of the longitudinal extension of the elements. The setting and speed of travel of the welding means is set to cause penetration of the side plate with welds at bridge the gap in each channel between adjacent fuel elements with a weld-through bubble of predetermined size. The fabrication of a high strength, dependable fuel element is provided, and the reduction of distortion and high production costs are facilitated by this method. (AEC)

  12. Photoshop Elements 10 For Dummies

    CERN Document Server

    Obermeier, Barbara

    2011-01-01

    Perfect your photos and images with this "focused" guide to the latest version of Photoshop Elements For most of us, the professional-level Photoshop is overkill for our needs. Amateur photographers and photo enthusiasts turn to Photoshop Elements for a powerful but simpler way to edit and retouch their snapshots. Photoshop Elements 10 For Dummies, fully updated and revised for the latest release of this software product, helps you navigate Elements to create, edit, fix, share, and organize the high-quality images you desire. Full color pages bring the techniques to life and make taking great

  13. Electronic structure of superheavy elements

    Energy Technology Data Exchange (ETDEWEB)

    Saito, Susumu [Tokyo Inst. of Tech. (Japan). Dept. of Physics

    2000-03-01

    The electronic structure of superheavy elements, from element 121 to 131, studied using the relativistic density-functional theory with quantum electrodynamical corrections (Berit interaction) by MacDonald and Vosko, is reported. These corrections give rise to a modification to previous results, and the g electron is found to appear from element 126. Since a recent study on molecular systems has clarified the surprising accuracy of the density-functional approach in evaluating the relative energy difference of ground and excited states, a further study of the electronic configuration of heavy elements using the relativistic density-functional theory and the further improvement of the theory are both awaited. (author)

  14. Rare-earth elements

    Science.gov (United States)

    Van Gosen, Bradley S.; Verplanck, Philip L.; Seal, Robert R.; Long, Keith R.; Gambogi, Joseph; Schulz, Klaus J.; DeYoung,, John H.; Seal, Robert R.; Bradley, Dwight C.

    2017-12-19

    The rare-earth elements (REEs) are 15 elements that range in atomic number from 57 (lanthanum) to 71 (lutetium); they are commonly referred to as the “lanthanides.” Yttrium (atomic number 39) is also commonly regarded as an REE because it shares chemical and physical similarities and has affinities with the lanthanides. Although REEs are not rare in terms of average crustal abundance, the concentrated deposits of REEs are limited in number.Because of their unusual physical and chemical properties, the REEs have diverse defense, energy, industrial, and military technology applications. The glass industry is the leading consumer of REE raw materials, which are used for glass polishing and as additives that provide color and special optical properties to the glass. Lanthanum-based catalysts are used in petroleum refining, and cerium-based catalysts are used in automotive catalytic converters. The use of REEs in magnets is a rapidly increasing application. Neodymium-iron-boron magnets, which are the strongest known type of magnets, are used when space and weight are restrictions. Nickel-metal hydride batteries use anodes made of a lanthanum-based alloys.China, which has led the world production of REEs for decades, accounted for more than 90 percent of global production and supply, on average, during the past decade. Citing a need to retain its limited REE resources to meet domestic requirements as well as concerns about the environmental effects of mining, China began placing restrictions on the supply of REEs in 2010 through the imposition of quotas, licenses, and taxes. As a result, the global rare-earth industry has increased its stockpiling of REEs; explored for deposits outside of China; and promoted new efforts to conserve, recycle, and substitute for REEs. New mine production began at Mount Weld in Western Australia, and numerous other exploration and development projects noted in this chapter are ongoing throughout the world.The REE-bearing minerals are

  15. Solution of Finite Element Equations

    DEFF Research Database (Denmark)

    Krenk, Steen

    An important step in solving any problem by the finite element method is the solution of the global equations. Numerical solution of linear equations is a subject covered in most courses in numerical analysis. However, the equations encountered in most finite element applications have some special...... features that justify the development of specialized solution algorithms....

  16. What Is a Chemical Element?

    Science.gov (United States)

    ten Hoor, Marten J.

    2017-01-01

    Contrary to current IUPAC recommendations, the chemical element X should be defined as the nucleus of the X atom. Consequently, different isotopes with their different nuclei belong to different elements, each one with its own physical and chemical properties. This view leads to the conclusion that we no longer have a periodic table of the…

  17. Lysets rytme som belysningsarkitektonisk element

    DEFF Research Database (Denmark)

    Bülow, Katja

    2009-01-01

    I den rytmiske tilgang til arkitektonisk belysning betragtes lyskilder som agerende elementer i et landskab, hvor en iagttager interagerer med lyset fra lyskilden.......I den rytmiske tilgang til arkitektonisk belysning betragtes lyskilder som agerende elementer i et landskab, hvor en iagttager interagerer med lyset fra lyskilden....

  18. Thermal insulation of fuel elements

    International Nuclear Information System (INIS)

    Dubrovcak, P.; Pec, V.; Pitonak, J.

    1978-01-01

    The claim of the invention concerns thermal insulation of fuel elements heated for measurement of uranium fuel physical properties. For this, layers of aluminium film and of glass fibre are wound onto the inner tube of the element cladding. The space between the inner and the outer tubes is evacuated and the tubes are spaced using spacer wires. (M.S.)

  19. Chemical experiments with superheavy elements.

    Science.gov (United States)

    Türler, Andreas

    2010-01-01

    Unnoticed by many chemists, the Periodic Table of the Elements has been extended significantly in the last couple of years and the 7th period has very recently been completed with eka-Rn (element 118) currently being the heaviest element whose synthesis has been reported. These 'superheavy' elements (also called transactinides with atomic number > or = 104 (Rf)) have been artificially synthesized in fusion reactions at accelerators in minute quantities of a few single atoms. In addition, all isotopes of the transactinide elements are radioactive and decay with rather short half-lives. Nevertheless, it has been possible in some cases to investigate experimentally chemical properties of transactinide elements and even synthesize simple compounds. The experimental investigation of superheavy elements is especially intriguing, since theoretical calculations predict significant deviations from periodic trends due to the influence of strong relativistic effects. In this contribution first experiments with hassium (Hs, atomic number 108), copernicium (Cn, atomic number 112) and element 114 (eka-Pb) are reviewed.

  20. Fluid element in SAP IV

    International Nuclear Information System (INIS)

    Yilmaz, C.; Akkas, N.

    1979-01-01

    In previous studies a fluid element is incorporated in the widely used general purpose finite element program SAPIV. This type of problem is of interest in the design of nuclear components involving geometric complexities and nonlinearities. The elasticity matrix of a general-purpose finite element program is modified in such a way that it becomes possible to idealize fluid as a structural finite element with zero shear modulus and a given bulk modules. Using the modified version of SAPIV, several solid-fluid interactions problems are solved. The numerical solutions are compared with the available analytical solutions. They are shown to be in reasonable aggrement. It is also shown that by solving an exterior-fluid interaction problem, the pressure wave propagation in the acoustic medium can be solved with the same approach. In this study, two of the problem not studied in the previous work will be presented. These problems are namely the effects of the link elements used at solid-fluid interfaces and of the concentrated loads on the response of the fluid medium. Truss elements are used as the link elements. After these investigations, it is decided that general purpose finite element programs with slight modifications can be used in the safety analysis of nuclear reactor plants. By this procedure it is possible to handle two-dimensional plane strain and tridimensional axisymmetric problems of this type. (orig.)

  1. Rack for nuclear fuel elements

    International Nuclear Information System (INIS)

    Rubinstein, H.J.; Gordon, C.B.; Robison, A.; Clark, P.M.

    1977-01-01

    Disclosed is a rack for storing spent nuclear fuel elements in which a plurality of aligned rows of upright enclosures of generally square cross-sectional areas contain vertically disposed spent fuel elements. Each fuel element is supported at the lower end thereof by a respective support that rests on the floor of the spent fuel pool for a nuclear power plant. An open rack frame is employed as an upright support for the enclosures containing the spent fuel elements. Legs at the lower corners of the frame rest on the floor of the pool to support the frame. In one exemplary embodiment, the support for the fuel element is in the form of a base on which a fuel element rests and the base is supported by legs. In another exemplary embodiment, each fuel element is supported on the pool floor by a self-adjusting support in the form of a base on which a fuel element rests and the base rests on a ball or swivel joint for self-alignment. The lower four corners of the frame are supported by legs adjustable in height for leveling the frame. Each adjustable frame leg is in the form of a base resting on the pool floor and the base supports a threaded post. The threaded post adjustably engages a threaded column on which rests the lower end of the frame. 16 claims, 14 figures

  2. On symmetric pyramidal finite elements

    Czech Academy of Sciences Publication Activity Database

    Liu, L.; Davies, K. B.; Yuan, K.; Křížek, Michal

    2004-01-01

    Roč. 11, 1-2 (2004), s. 213-227 ISSN 1492-8760 R&D Projects: GA AV ČR IAA1019201 Institutional research plan: CEZ:AV0Z1019905 Keywords : mesh generation * finite element method * composite elements Subject RIV: BA - General Mathematics Impact factor: 0.108, year: 2004

  3. Repetitive elements in parasitic protozoa

    Directory of Open Access Journals (Sweden)

    Clayton Christine

    2010-05-01

    Full Text Available Abstract A recent paper published in BMC Genomics suggests that retrotransposition may be active in the human gut parasite Entamoeba histolytica. This adds to our knowledge of the various types of repetitive elements in parasitic protists and the potential influence of such elements on pathogenicity. See research article http://www.biomedcentral.com/1471-2164/11/321

  4. Massively Parallel Finite Element Programming

    KAUST Repository

    Heister, Timo

    2010-01-01

    Today\\'s large finite element simulations require parallel algorithms to scale on clusters with thousands or tens of thousands of processor cores. We present data structures and algorithms to take advantage of the power of high performance computers in generic finite element codes. Existing generic finite element libraries often restrict the parallelization to parallel linear algebra routines. This is a limiting factor when solving on more than a few hundreds of cores. We describe routines for distributed storage of all major components coupled with efficient, scalable algorithms. We give an overview of our effort to enable the modern and generic finite element library deal.II to take advantage of the power of large clusters. In particular, we describe the construction of a distributed mesh and develop algorithms to fully parallelize the finite element calculation. Numerical results demonstrate good scalability. © 2010 Springer-Verlag.

  5. Trace elements and bone health.

    Science.gov (United States)

    Zofková, Ivana; Nemcikova, Petra; Matucha, Petr

    2013-08-01

    The importance of nutrition factors such as calcium, vitamin D and vitamin K for the integrity of the skeleton is well known. Moreover, bone health is positively influenced by certain elements (e.g., zinc, copper, fluorine, manganese, magnesium, iron and boron). Deficiency of these elements slows down the increase of bone mass in childhood and/or in adolescence and accelerates bone loss after menopause or in old age. Deterioration of bone quality increases the risk of fractures. Monitoring of homeostasis of the trace elements together with the measurement of bone density and biochemical markers of bone metabolism should be used to identify and treat patients at risk of non-traumatic fractures. Factors determining the effectivity of supplementation include dose, duration of treatment, serum concentrations, as well as interactions among individual elements. Here, we review the effect of the most important trace elements on the skeleton and evaluate their clinical importance.

  6. Platinum-group elements

    Science.gov (United States)

    Zientek, Michael L.; Loferski, Patricia J.; Parks, Heather L.; Schulte, Ruth F.; Seal, Robert R.; Schulz, Klaus J.; DeYoung,, John H.; Seal, Robert R.; Bradley, Dwight C.

    2017-12-19

    The platinum-group elements (PGEs)—platinum, palladium, rhodium, ruthenium, iridium, and osmium—are metals that have similar physical and chemical properties and tend to occur together in nature. PGEs are indispensable to many industrial applications but are mined in only a few places. The availability and accessibility of PGEs could be disrupted by economic, environmental, political, and social events. The United States net import reliance as a percentage of apparent consumption is about 90 percent.PGEs have many industrial applications. They are used in catalytic converters to reduce carbon monoxide, hydrocarbon, and nitrous oxide emissions in automobile exhaust. The chemical industry requires platinum or platinum-rhodium alloys to manufacture nitric oxide, which is the raw material used to manufacture explosives, fertilizers, and nitric acid. In the petrochemical industry, platinum-supported catalysts are needed to refine crude oil and to produce aromatic compounds and high-octane gasoline. Alloys of PGEs are exceptionally hard and durable, making them the best known coating for industrial crucibles used in the manufacture of chemicals and synthetic materials. PGEs are used by the glass manufacturing industry in the production of fiberglass and flat-panel and liquid crystal displays. In the electronics industry, PGEs are used in computer hard disks, hybridized integrated circuits, and multilayer ceramic capacitors.Aside from their industrial applications, PGEs are used in such other fields as health, consumer goods, and finance. Platinum, for example, is used in medical implants, such as pacemakers, and PGEs are used in cancer-fighting drugs. Platinum alloys are an ideal choice for jewelry because of their white color, strength, and resistance to tarnish. Platinum, palladium, and rhodium in the form of coins and bars are also used as investment commodities, and various financial instruments based on the value of these PGEs are traded on major exchanges

  7. Elemental Impurities in Pharmaceutical Excipients.

    Science.gov (United States)

    Li, Gang; Schoneker, Dave; Ulman, Katherine L; Sturm, Jason J; Thackery, Lisa M; Kauffman, John F

    2015-12-01

    Control of elemental impurities in pharmaceutical materials is currently undergoing a transition from control based on concentrations in components of drug products to control based on permitted daily exposures in drug products. Within the pharmaceutical community, there is uncertainty regarding the impact of these changes on manufactures of drug products. This uncertainty is fueled in part by a lack of publically available information on elemental impurity levels in common pharmaceutical excipients. This paper summarizes a recent survey of elemental impurity levels in common pharmaceutical excipients as well as some drug substances. A widely applicable analytical procedure was developed and was shown to be suitable for analysis of elements that are subject to United States Pharmacopoeia Chapter and International Conference on Harmonization's Q3D Guideline on Elemental Impurities. The procedure utilizes microwave-assisted digestion of pharmaceutical materials and inductively coupled plasma mass spectrometry for quantitative analysis of these elements. The procedure was applied to 190 samples from 31 different excipients and 15 samples from eight drug substances provided through the International Pharmaceutical Excipient Council of the Americas. The results of the survey indicate that, for the materials included in the study, relatively low levels of elemental impurities are present. © 2015 The Authors. Journal of Pharmaceutical Sciences published by Wiley Periodicals, Inc. and the American Pharmacists Association.

  8. Chemistry of the heaviest elements

    International Nuclear Information System (INIS)

    Hoffman, D.C.

    1996-01-01

    Studies of the chemical properties of the elements at the uppermost end of the periodic table are discussed. Some historical perspective is given, but major emphasis is on recent studies. Isotopes of these elements are short-lived and, therefore, must be studied near the site of production. They must be produced with charged-particle beams at accelerators rather than via neutron capture. The use of radioactive heavy actinide targets is often required and the number of atoms produced is so small that any chemistry to be performed must be done on an ''atom-at-a-time'' basis. Furthermore, a knowledge of their nuclear properties is required in order to identify and detect them. To date, both gas and aqueous phase properties of elements as heavy as element 104 (rutherfordium) and element 105 (hahnium) have been investigated, even though their longest-lived known isotopes have half-lives of only 65 and 35 seconds, respectively. The experimental results show that their chemical properties cannot be simply extrapolated from the known properties of their lighter homologs in the periodic table, emphasizing the importance of obtaining additional experimental information for the heaviest elements to compare with predictions and help assess the influence of relativistic effects. The feasibility of the extension of chemical studies to still heavier elements is also discussed. (orig.)

  9. Hydrogen in CANDU fuel elements

    International Nuclear Information System (INIS)

    Sejnoha, R.; Manzer, A.M.; Surette, B.A.

    1995-01-01

    Unirradiated and irradiated CANDU fuel cladding was tested to compare the role of stress-corrosion cracking and of hydrogen in the development of fuel defects. The results of the tests are compared with information on fuel performance in-reactor. The role of hydriding (deuteriding) from the coolant and from the fuel element inside is discussed, and the control of 'hydrogen gas' content in the element is confirmed as essential for defect-free fuel performance. Finally, implications for fuel element design are discussed. (author)

  10. quadratic spline finite element method

    Directory of Open Access Journals (Sweden)

    A. R. Bahadir

    2002-01-01

    Full Text Available The problem of heat transfer in a Positive Temperature Coefficient (PTC thermistor, which may form one element of an electric circuit, is solved numerically by a finite element method. The approach used is based on Galerkin finite element using quadratic splines as shape functions. The resulting system of ordinary differential equations is solved by the finite difference method. Comparison is made with numerical and analytical solutions and the accuracy of the computed solutions indicates that the method is well suited for the solution of the PTC thermistor problem.

  11. Elements of Tiny Plasma Spectrometers

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose to advance major elements of a miniaturized plasma spectrometer for flight on future missions. This type of instrument has been developed and successfully...

  12. sources of the chemical elements

    African Journals Online (AJOL)

    THE GEOCHEMISTRY OF BANDED IRON. FORMATIONS IN THE SUKUMALAND GREENSTONE. BELT OF GEITA, NORTHERN TANZANIA: EVIDENCE. FOR MIXING OF HYDROTHERMAL AND CLASTIC. SOURCES OF THE CHEMICAL ELEMENTS. MAH Maboko. Department of Geology, University of Dar es Salaam.

  13. Finite element methods for engineers

    CERN Document Server

    Fenner, Roger T

    2013-01-01

    This book is intended as a textbook providing a deliberately simple introduction to finite element methods in a way that should be readily understandable to engineers, both students and practising professionals. Only the very simplest elements are considered, mainly two dimensional three-noded “constant strain triangles”, with simple linear variation of the relevant variables. Chapters of the book deal with structural problems (beams), classification of a broad range of engineering into harmonic and biharmonic types, finite element analysis of harmonic problems, and finite element analysis of biharmonic problems (plane stress and plane strain). Full Fortran programs are listed and explained in detail, and a range of practical problems solved in the text. Despite being somewhat unfashionable for general programming purposes, the Fortran language remains very widely used in engineering. The programs listed, which were originally developed for use on mainframe computers, have been thoroughly updated for use ...

  14. Elemental ABAREX -- a user's manual

    International Nuclear Information System (INIS)

    Smith, A.B.

    1999-01-01

    ELEMENTAL ABAREX is an extended version of the spherical optical-statistical model code ABAREX, designed for the interpretation of neutron interactions with elemental targets consisting of up to ten isotopes. The contributions from each of the isotopes of the element are explicitly dealt with, and combined for comparison with the elemental observables. Calculations and statistical fitting of experimental data are considered. The code is written in FORTRAN-77 and arranged for use on the IBM-compatible personal computer (PC), but it should operate effectively on a number of other systems, particularly VAX/VMS and IBM work stations. Effort is taken to make the code user friendly. With this document a reasonably skilled individual should become fluent with the use of the code in a brief period of time

  15. Environmental research on actinide elements

    International Nuclear Information System (INIS)

    Pinder, J.E. III; Alberts, J.J.; McLeod, K.W.; Schreckhise, R.G.

    1987-08-01

    The papers synthesize the results of research sponsored by DOE's Office of Health and Environmental Research on the behavior of transuranic and actinide elements in the environment. Separate abstracts have been prepared for the 21 individual papers

  16. The evolution of the elements

    International Nuclear Information System (INIS)

    Williams, P.M.

    1978-01-01

    It is believed that only the lightest elements, hydrogen and helium, were created during the 'Big Bang' origin of the Universe and that all heavier elements were synthesized by nuclear reactions in stars, the interstellar medium and possibly in 'little bangs' in the nuclei of galaxies. The composition of the interstellar medium has evolved through enrichment by processed material shed by evolving stars and the composition of the Solar System reflects that of the interstellar medium at the time of its formation. Differentiation processes during the evolution of the Solar System and individual planets account for the different compositions of the Sun and the planets. The measurement of the abundance distribution of the elements has become a very powerful tool in the elucidation of the evolution of the Solar System, stars and the Galaxy. This review attempts to trace the formation of the elements in stars and their subsequent evolution. (author)

  17. FUEL ELEMENTS FOR NEUTRONIC REACTORS

    Science.gov (United States)

    Foote, F.G.; Jette, E.R.

    1963-05-01

    A fuel element for a nuclear reactor is described that consists of a jacket containing a unitary core of fissionable material and a filling of a metal of the group consisting of sodium and sodium-potassium alloys. (AEC)

  18. Trace elements and human fertility.

    OpenAIRE

    Stovell, Alex Gordon.

    1999-01-01

    Methods were developed and validated for the analysis of trace elements in human scalp hair, blood serum, ovarian follicular fluid and seminal plasma by inductively coupled plasma mass spectrometry (ICP-MS). An interlaboratory comparison was also undertaken to compare the analysis of biological materials by ICP-MS with instrumental neutron activation analysis (INAA). Preliminary trace element protein speciation experiments were carried out using size exclusion high performance liquid chromato...

  19. PROPOSAL OF NEW OPTICAL ELEMENTS

    Directory of Open Access Journals (Sweden)

    Goce Chadzitaskos

    2013-10-01

    Full Text Available A overview of our patented proposals of new optical elements is presented. The elements are suitable for laser pulse analysis, telescopy, X-ray microscopy and X-ray telescopy. They are based on the interference properties of light: a special grating for a double slit pattern, parabolic strip imaging for a telescope, and Bragg’s condition for X-ray scattering on a slice of a single crystal for X-raymicroscopy and X-ray telescopy.

  20. Fuel element box inspection device

    International Nuclear Information System (INIS)

    Ortmayer, R.M.; Pick, W.

    1985-01-01

    The invention concerns a device for inspecting the outer geometry of a long fuel element box by measuring the surface contours over its longitudinal crossection and along its length by sensors. These are kept in a sledge which can be moved along the fuel element guide in a slot guide. The measurement signals reach an evaluation device outside the longitudinal box. (orig./HP) [de

  1. Programming the finite element method

    CERN Document Server

    Smith, I M; Margetts, L

    2013-01-01

    Many students, engineers, scientists and researchers have benefited from the practical, programming-oriented style of the previous editions of Programming the Finite Element Method, learning how to develop computer programs to solve specific engineering problems using the finite element method. This new fifth edition offers timely revisions that include programs and subroutine libraries fully updated to Fortran 2003, which are freely available online, and provides updated material on advances in parallel computing, thermal stress analysis, plasticity return algorithms, convection boundary c

  2. Chemistry of the transactinide elements

    International Nuclear Information System (INIS)

    Schaedel, M.

    1995-01-01

    The experimentally known chemical properties of the transactinide elements 104 and 105, and the experimental techniques used to study these properties on an atom-at-a-time base, are reviewed. The production of transactinides in heavy ion reactions and the specific aspects of chemical separations with single atoms is briefly discussed. The chemical properties of the first two transactinide elements are compared with the lighter element homologs in group 4 and 5 of the Periodic Table and with the expected behaviour obtained from most recent atomic and molecular calculations which take the increasingly strong relativistic effect into account. Elements 104 and 105 behave as transactinide elements and, in general, exhibit properties characteristic of their position in group 4 and 5 of the Periodic Table. However, surprising deviations of the chemical properties from expectations based on simple extrapolations have been observed. It is shown that the chemical properties of the heaviest elements cannot reliably be predicted by simple extrapolations. Prospects to extend our chemical knowledge at the top end of the Periodic Table are discussed. (orig.)

  3. ANSYS duplicate finite-element checker routine

    Science.gov (United States)

    Ortega, R.

    1995-01-01

    An ANSYS finite-element code routine to check for duplicated elements within the volume of a three-dimensional (3D) finite-element mesh was developed. The routine developed is used for checking floating elements within a mesh, identically duplicated elements, and intersecting elements with a common face. A space shuttle main engine alternate turbopump development high pressure oxidizer turbopump finite-element model check using the developed subroutine is discussed. Finally, recommendations are provided for duplicate element checking of 3D finite-element models.

  4. New elements - approaching Z=114

    Energy Technology Data Exchange (ETDEWEB)

    Hofmann, S.

    1998-03-01

    The search for new elements is part of the broader field of investigations of nuclei at the limits of stability. In two series of experiments at SHIP, six new elements (Z=107-112) were synthesized via fusion reactions using 1n-deexcitation channels and lead or bismuth targets. The isotopes were unambiguously identified by means of {alpha}-{alpha} correlations. Not fission, but alpha decay is the dominant decay mode. The collected decay data establish a means of comparison with theoretical data. This aids in the selection of appropriate models that describe the properties of known nuclei. Predictions based on these models are useful in the preparation of the next generation of experiments. Cross-sections decrease by two orders of magnitude from bohrium (Z=107) to element 112, for which a cross-section of 1 pb was measured. The development of intense beam currents and sensitive detection methods is essential for the production and identification of still heavier elements and new isotopes of already known elements, as well as the measurement of small {alpha}-, {beta}- and fission-branching ratios. An equally sensitive set-up is needed for the measurement of excitation functions at low cross-sections. Based on our results, it is likely that the production of isotopes of element 114 close to the island of spherical super heavy elements (SHE) could be achieved by fusion reactions using {sup 208}Pb targets. Systematic studies of the reaction cross-sections indicate that the transfer of nucleons is an important process for the initiation of fusion. The data allow for the fixing of a narrow energy window for the production of SHE using 1n-emission channels. (orig.)

  5. New elements - approaching Z=114

    International Nuclear Information System (INIS)

    Hofmann, S.

    1998-03-01

    The search for new elements is part of the broader field of investigations of nuclei at the limits of stability. In two series of experiments at SHIP, six new elements (Z=107-112) were synthesized via fusion reactions using 1n-deexcitation channels and lead or bismuth targets. The isotopes were unambiguously identified by means of α-α correlations. Not fission, but alpha decay is the dominant decay mode. The collected decay data establish a means of comparison with theoretical data. This aids in the selection of appropriate models that describe the properties of known nuclei. Predictions based on these models are useful in the preparation of the next generation of experiments. Cross-sections decrease by two orders of magnitude from bohrium (Z=107) to element 112, for which a cross-section of 1 pb was measured. The development of intense beam currents and sensitive detection methods is essential for the production and identification of still heavier elements and new isotopes of already known elements, as well as the measurement of small α-, β- and fission-branching ratios. An equally sensitive set-up is needed for the measurement of excitation functions at low cross-sections. Based on our results, it is likely that the production of isotopes of element 114 close to the island of spherical super heavy elements (SHE) could be achieved by fusion reactions using 208 Pb targets. Systematic studies of the reaction cross-sections indicate that the transfer of nucleons is an important process for the initiation of fusion. The data allow for the fixing of a narrow energy window for the production of SHE using 1n-emission channels. (orig.)

  6. Finite element modeling of piezoelectric elements with complex electrode configuration

    International Nuclear Information System (INIS)

    Paradies, R; Schläpfer, B

    2009-01-01

    It is well known that the material properties of piezoelectric materials strongly depend on the state of polarization of the individual element. While an unpolarized material exhibits mechanically isotropic material properties in the absence of global piezoelectric capabilities, the piezoelectric material properties become transversally isotropic with respect to the polarization direction after polarization. Therefore, for evaluating piezoelectric elements the material properties, including the coupling between the mechanical and the electromechanical behavior, should be addressed correctly. This is of special importance for the micromechanical description of piezoelectric elements with interdigitated electrodes (IDEs). The best known representatives of this group are active fiber composites (AFCs), macro fiber composites (MFCs) and the radial field diaphragm (RFD), respectively. While the material properties are available for a piezoelectric wafer with a homogeneous polarization perpendicular to its plane as postulated in the so-called uniform field model (UFM), the same information is missing for piezoelectric elements with more complex electrode configurations like the above-mentioned ones with IDEs. This is due to the inhomogeneous field distribution which does not automatically allow for the correct assignment of the material, i.e. orientation and property. A variation of the material orientation as well as the material properties can be accomplished by including the polarization process of the piezoelectric transducer in the finite element (FE) simulation prior to the actual load case to be investigated. A corresponding procedure is presented which automatically assigns the piezoelectric material properties, e.g. elasticity matrix, permittivity, and charge vector, for finite element models (FEMs) describing piezoelectric transducers according to the electric field distribution (field orientation and strength) in the structure. A corresponding code has been

  7. Brain trace elements and aging

    International Nuclear Information System (INIS)

    Hebbrecht, Geert; Maenhaut, Willy; Reuck, Jacques de

    1999-01-01

    Degenerative mechanisms involved in the aging process of the brain are to a certain extent counteracted by repair mechanisms. In both degenerative and recovery processes, trace elements are involved. The present study focused on the role of two minor (i.e., K and Ca) and six trace elements (i.e., Mn, Fe, Cu, Zn, Se and Rb) in the aging process. The elements were determined by PIXE in cerebral cortex and white matter, basal ganglia, brainstem and cerebellar cortex of 18 postmortem human brains, from persons without a history of neurologic or psychiatric disease who deceased between the age of 7 and 79. This age range allowed us to study the relationship between elemental concentrations and age. The most prominent findings were a concentration decrease for K and Rb and a concentration increase for the elements Ca, Fe, Zn and Se. The study supports recent findings that Ca and Fe are involved in brain degenerative processes initiated by oxygen free radicals, whereas Zn and Se are involved in immunological reactions counteracting the aging process

  8. Spectral element simulation of ultrafiltration

    DEFF Research Database (Denmark)

    Hansen, M.; Barker, Vincent A.; Hassager, Ole

    1998-01-01

    A spectral element method for simulating stationary 2-D ultrafiltration is presented. The mathematical model is comprised of the Navier-Stokes equations for the velocity field of the fluid and a transport equation for the concentration of the solute. In addition to the presence of the velocity...... vector in the transport equation, the system is coupled by the dependency of the fluid viscosity on the solute concentration and by a concentration-dependent boundary condition for the Navier-Stokes equations at the membrane surface. The spectral element discretization yields a nonlinear algebraic system....... The performance of the spectral element code when applied to several ultrafiltration problems is reported. (C) 1998 Elsevier Science Ltd. All rights reserved....

  9. Lysets rytme som belysningsarkitektonisk element

    DEFF Research Database (Denmark)

    Bülow, Katja

    2007-01-01

    I afhandlingen "Lysets rytme som belysningsarkitektonisk element" optræder lysstofrør, neonrør, billygter og LED som lyskilder, der markerer et sted ved hjælp af et rytmisk tema. Motivationen for afhandlingen var at indkredse lyskilders rytmiske optræden som et arkitektonisk potentiale og udvide...... opfattelsen af belysningsarkitekturens virkefelt. Ofte betragtes arkitektonisk belysning som et element, der 'modulerer' - former - et stykke arkitektur visuelt, så det fremstår tydeligt i mørket. Her er lyskilden en stille statist, der sørger for at belyse omgivelserne. I den rytmiske tilgang til...... arkitektonisk belysning betragtes lyskilder, dagslys som kunstige, som agerende elementer i et landskab hvor en iagttager interagerer med lyset fra lyskilden. Denne tilgang giver mulighed for ikke kun at betragte arkitektonisk belysning som visuel repræsentation af omgivelserne, men også som en sammensætning af...

  10. [Trace elements of bone tumors].

    Science.gov (United States)

    Kalashnikov, V M; Zaĭchik, V E; Bizer, V A

    1983-01-01

    Due to activation analysis involving the use of neutrons from a nuclear reactor, the concentrations of 11 trace elements: scandium, iron, cobalt, mercury, rubidium, selenium, silver, antimony, chrome, zinc and terbium in intact bone and skeletal tumors were measured. 76 specimens of bioptates and resected material of operations for bone tumors and 10 specimens of normal bone tissue obtained in autopsies of cases of sudden death were examined. The concentrations of trace elements and their dispersion patterns in tumor tissue were found to be significantly higher than those in normal bone tissue. Also, the concentrations of some trace elements in tumor differed significantly from those in normal tissue; moreover, they were found to depend on the type and histogenesis of the neoplasm.

  11. Marine oligotrophy and element biogeochemistry

    International Nuclear Information System (INIS)

    Jeffree, R.A.; Szymczak, R.

    1999-01-01

    A biogeochemical model has been developed that explains the inverse and non-linear relationship between Po-210 concentration in zooplankton and their biomass, under oligotrophic conditions in French Polynesia. This study identified other elements with comparable accumulatory behaviours to Po-210 in phytoplankton, seston and zooplankton, that are proposed to be critical to its enhanced environmental levels under oligotrophy. Field investigation in the Gulf of Papua showed that four of these a priori identified elements viz Cd, Co, Pb and Mn, as well as Cr and Ni, showed elevated water concentrations with reduced biological productivity, results that are consistent with those previously obtained for Po-210 and the proposed explanatory model. These findings point to the enhanced susceptibility of oligotrophic systems to contamination from particle-reactive elements. (author)

  12. QCD Matrix Elements + Parton Showers

    CERN Document Server

    Catani, S; Kühn, R; Webber, Bryan R

    2001-01-01

    We propose a method for combining QCD matrix elements and parton showers in Monte Carlo simulations of hadronic final states in $e^+e^-$ annihilation. The matrix element and parton shower domains are separated at some value $y_{ini}$ of the jet resolution, defined according to the $k_T$-clustering algorithm. The matrix elements are modified by Sudakov form factors and the parton showers are subjected to a veto procedure to cancel dependence on $y_{ini}$ to next-to-leading logarithmic accuracy. The method provides a leading-order description of hard multi-jet configurations together with jet fragmentation, while avoiding the most serious problems of double counting. We present first results of an approximate implementation using the event generator APACIC++.

  13. Physical model of Nernst element

    International Nuclear Information System (INIS)

    Nakamura, Hiroaki; Ikeda, Kazuaki; Yamaguchi, Satarou

    1998-08-01

    Generation of electric power by the Nernst effect is a new application of a semiconductor. A key point of this proposal is to find materials with a high thermomagnetic figure-of-merit, which are called Nernst elements. In order to find candidates of the Nernst element, a physical model to describe its transport phenomena is needed. As the first model, we began with a parabolic two-band model in classical statistics. According to this model, we selected InSb as candidates of the Nernst element and measured their transport coefficients in magnetic fields up to 4 Tesla within a temperature region from 270 K to 330 K. In this region, we calculated transport coefficients numerically by our physical model. For InSb, experimental data are coincident with theoretical values in strong magnetic field. (author)

  14. Fuel element tomography by gammametry

    International Nuclear Information System (INIS)

    Simonet, G.; Pineira, T.

    1982-03-01

    As from transversal gamma determinations of a cylindrical fuel element, the TOMOGAM program reconstitutes the distribution of fission products in a section. This direct, fast and non destructive method, makes it possible to have access to the behaviour of the fuel at any time: - the soluble fission products in the matrix represent the fuel itself and the distribution of the fissions, - the migrating elements inform on the temperature reached in accordance with the permitted powers, - the volatile nuclides build up in particular points where physical-chemical phenomena of fuel-cladding interaction are liable to corrode the latter. Hence, gamma spectrometry extends its possibilities of analysis relative to the performance of reactor elements [fr

  15. ASTEROID PROPER ELEMENTS V1.0

    Data.gov (United States)

    National Aeronautics and Space Administration — Proper elements of asteroids are derived from the osculating orbital elements by correcting for the perturbations of the major planets to arrive at elements which...

  16. FINITE ELEMENT ANALYSIS OF ELEMENT ANALYSIS OF A FREE ...

    African Journals Online (AJOL)

    eobe

    formulated as functional minimization. Finite Element Method (FEM) is regarde accurate and versatile numerical too differential equations that model phys. The methodology is used in vari engineering in which the problems ar partial differential equations. The met considerable application in structural e related disciplines.

  17. Fractal elements and their applications

    CERN Document Server

    Gil’mutdinov, Anis Kharisovich; El-Khazali, Reyad

    2017-01-01

    This book describes a new type of passive electronic components, called fractal elements, from a theoretical and practical point of view. The authors discuss in detail the physical implementation and design of fractal devices for application in fractional-order signal processing and systems. The concepts of fractals and fractal signals are explained, as well as the fundamentals of fractional calculus. Several implementations of fractional impedances are discussed, along with comparison of their performance characteristics. Details of design, schematics, fundamental techniques and implementation of RC-based fractal elements are provided. .

  18. Quality assurance of fuel elements

    International Nuclear Information System (INIS)

    Hoerber, J.

    1980-01-01

    The quality assurance activities for reactor fuel elements are based on a quality assurance system which implies the requirements resulting from the specifications, regulations of the authorities, national standards and international rules and regulations. The quality assurance related to production of reactor fuel will be shown for PWR fuel elements in all typical fabrication steps as conversion into UO 2 -powder, pelletizing, rodmanufacture and assembling. A wide range of destructive and nondestructive techniques is applied. Quality assurance is not only verified by testing techniques but also by process monitoring by means of parameter control in production and testing procedures. (RW)

  19. Nuclear fuel element end fitting

    International Nuclear Information System (INIS)

    Jabsen, F.S.

    1979-01-01

    A typical embodiment of the invention has an array of sockets that are welded to the intersections of the plates that form the upper and lower end fittings of a nuclear reactor fuel element. The sockets, which are generally cylindrical in shape, are oriented in directions that enable the longitudinal axes of the sockets to align with the longitudinal axes of the fuel rods that are received in the respective sockets. Detents impressed in the surfaces of the sockets engage mating grooves that are formed in the ends of the fuel rods to provide for the structural integrity of the fuel element

  20. Organic chemistry of elemental phosphorus

    International Nuclear Information System (INIS)

    Milyukov, V A; Budnikova, Yulia H; Sinyashin, Oleg G

    2005-01-01

    The principal achievements and the modern trends in the development of the chemistry of elemental phosphorus are analysed, described systematically and generalised. The possibilities and advantages of the preparation of organophosphorus compounds directly from white phosphorus are demonstrated. Attention is focused on the activation and transformation of elemental phosphorus in the coordination sphere of transition metal complexes. The mechanisms of the reactions of white phosphorus with nucleophilic and electrophilic reagents are discussed. Electrochemical approaches to the synthesis of organic phosphorus derivatives based on white phosphorus are considered.

  1. Multiphoton spectroscopy in heavy elements

    International Nuclear Information System (INIS)

    Solarz, R.W.; Paisner, J.A.; Worden, E.F.

    1977-01-01

    Some recently discovered regularities in the spectra of heavy elements which are also applicable to the analysis of the spectra of lighter atoms are described. It is pointed out that stepwise resonant multiphoton methods are irreplaceable tools in the study of high lying states in a complex atomic system. Systematic applications of these methods has permitted regularities to be observed which also hold for the lighter elements. It is noted that greatly increased understanding of the excited state structure of heavy atoms is not possible. 8 references

  2. Elements of spatial data quality

    CERN Document Server

    Guptill, SC

    1995-01-01

    Elements of Spatial Data Quality outlines the need and suggests potential categories for the content of a comprehensive statement of data quality that must be imbedded in the metadata that accompanies the transfer of a digital spatial data file or is available in a separate metadata catalog. Members of the International Cartographic Association's Commission on Spatial Data Quality have identified seven elements of data quality: positional accuracy, attribute accuracy, completeness, logical consistency, lineage, semantic accuracy and temporal information. In the book the authors describe: compo

  3. Transposable elements and circular DNAs

    KAUST Repository

    Mourier, Tobias

    2016-09-26

    Circular DNAs are extra-chromosomal fragments that become circularized by genomic recombination events. We have recently shown that yeast LTR elements generate circular DNAs through recombination events between their flanking long terminal repeats (LTRs). Similarly, circular DNAs can be generated by recombination between LTRs residing at different genomic loci, in which case the circular DNA will contain the intervening sequence. In yeast, this can result in gene copy number variations when circles contain genes and origins of replication. Here, I speculate on the potential and implications of circular DNAs generated through recombination between human transposable elements.

  4. Status of transuranium element production

    International Nuclear Information System (INIS)

    King, L.J.

    1985-01-01

    The Transuranium Processing Plant at Oak Ridge National Laboratory has been the production, storage, and distribution center for the heavy-element research program of the US Department of Energy since 1966. During the past four years, annual production rates of transcurium elements have been relatively stable, averaging 34 mg of 249 Bk, 369 mg of 252 Cf, 1.4 mg of 253 Es, and 0.7 pg of 257 Fm. The extensive provisions for changing and modifying equipment have allowed continual updating of the plant to include new concepts in chemical processes and equipment design. 21 refs., 4 figs., 2 tabs

  5. FINITE ELEMENT ANALYSIS OF STRUCTURES

    Directory of Open Access Journals (Sweden)

    PECINGINA OLIMPIA-MIOARA

    2015-05-01

    Full Text Available The application of finite element method is analytical when solutions can not be applied for deeper study analyzes static, dynamic or other types of requirements in different points of the structures .In practice it is necessary to know the behavior of the structure or certain parts components of the machine under the influence of certain factors static and dynamic . The application of finite element in the optimization of components leads to economic growth , to increase reliability and durability organs studied, thus the machine itself.

  6. Elements to diminish radioactive accidents

    International Nuclear Information System (INIS)

    Cortes I, M.E.; Ramirez G, F.P.

    1998-01-01

    In this work it is presented an application of the cause-effect diagram method or Ichikawa method identifying the elements that allow to diminish accidents when the radioactive materials are transported. It is considered the transport of hazardous materials which include radioactive materials in the period: December 1996 until March 1997. Among the identified elements by this method it is possible to mention: the road type, the radioactive source protection, the grade driver responsibility and the preparation that the OEP has in the radioactive material management. It is showed the differences found between the country inner roads and the Mexico City area. (Author)

  7. An Improved Triangular Element With Drilling Rotations

    DEFF Research Database (Denmark)

    Damkilde, Lars; Grønne, Mikael

    2002-01-01

    A new plane element with rotational degrees in the corner nodes is presented. The element has 12 degrees of freedom and the only difference from the well-known Linear Strain Triangular (LST) element is that the displacements perpendicular to the element sides in the mid-side nodes are replaced...... by rotations in the corner nodes. Compared to Allman's plane element which was the first succesfull implementation of drilling rotations the proposed element has extra displacements in the mid-side nodes parallel to the element sides. The performance should therefore be better and closer to the LST-element...

  8. Nuclear fuel elements design, fabrication and performance

    CERN Document Server

    Frost, Brian R T

    1982-01-01

    Nuclear Fuel Elements: Design, Fabrication and Performance is concerned with the design, fabrication, and performance of nuclear fuel elements, with emphasis on fast reactor fuel elements. Topics range from fuel types and the irradiation behavior of fuels to cladding and duct materials, fuel element design and modeling, fuel element performance testing and qualification, and the performance of water reactor fuels. Fast reactor fuel elements, research and test reactor fuel elements, and unconventional fuel elements are also covered. This volume consists of 12 chapters and begins with an overvie

  9. Superheavy elements and decay properties

    Indian Academy of Sciences (India)

    2015-08-04

    Aug 4, 2015 ... Home; Journals; Pramana – Journal of Physics; Volume 85; Issue 3. Superheavy elements and decay properties. K P Santhosh. Volume 85 Issue 3 ... Author Affiliations. K P Santhosh1. School of Pure and Applied Physics, Kannur University, Swami Anandatheertha Campus, Payyanur 670 327, India ...

  10. Automatic welding of fuel elements

    International Nuclear Information System (INIS)

    Briola, J.

    1958-01-01

    The welding process depends on the type of fuel element, the can material and the number of cartridges to be welded: - inert-gas welding (used for G2 and the 1. set of EL3), - inert atmosphere arc welding (used for welding uranium and zirconium), - electronic welding (used for the 2. set of EL3 and the tank of Proserpine). (author) [fr

  11. Treatment of incorporated transuranium elements

    International Nuclear Information System (INIS)

    Volf, V.

    1978-01-01

    The text of this report and its tables and figures provide basic information on the decorporation of transuranium elements as well as an insight into the more general principles, trends and interactions. The detailed tables and the exhaustive list of important references should enable the reader to make his own conclusions in a minimum of time

  12. Variation of elements in nature

    International Nuclear Information System (INIS)

    Venkatavaradan, V.S.

    1977-01-01

    A review is made of nuclear reactions and other physical processes during the formations of planets, leading to the existing elemental and isotope variation. Thermonuclear fusion, radioactive decay, nuclear reactions caused by cosmic rays, man-made isotopes as some of the causes are discussed in details

  13. FOIL ELEMENT FOR NUCLEAR REACTOR

    Science.gov (United States)

    Noland, R.A.; Walker, D.E.; Spinrad, B.I.

    1963-07-16

    A method of making a foil-type fuel element is described. A foil of fuel metal is perforated in; regular design and sheets of cladding metal are placed on both sides. The cladding metal sheets are then spot-welded to each other through the perforations, and the edges sealed. (AEC)

  14. Environmental research on actinide elements

    Energy Technology Data Exchange (ETDEWEB)

    Pinder, J.E. III; Alberts, J.J.; McLeod, K.W.; Schreckhise, R.G. (eds.)

    1987-08-01

    The papers synthesize the results of research sponsored by DOE's Office of Health and Environmental Research on the behavior of transuranic and actinide elements in the environment. Separate abstracts have been prepared for the 21 individual papers. (ACR)

  15. Trace elements in brazilian soils

    International Nuclear Information System (INIS)

    Rocha, Geraldo Cesar

    1995-01-01

    A literature revision on trace elements (Zn, B, Mn, Mo, Cu, Fe, and Cl) in Brazilian soils was prepared, with special attention to the chemical form and range in the soil, extraction methods and correlation of the amount in soils with soil properties

  16. Scarcity of rare earth elements

    NARCIS (Netherlands)

    de Boer, M.A.; Lammertsma, K.

    2013-01-01

    Rare earth elements (REEs) are important for green and a large variety of high-tech technologies and are, therefore, in high demand. As a result, supply with REEs is likely to be disrupted (the degree of depends on the REE) in the near future. The 17 REEs are divided into heavy and light REEs. Other

  17. Quadrilateral finite element mesh coarsening

    Science.gov (United States)

    Staten, Matthew L; Dewey, Mark W; Benzley, Steven E

    2012-10-16

    Techniques for coarsening a quadrilateral mesh are described. These techniques include identifying a coarsening region within the quadrilateral mesh to be coarsened. Quadrilateral elements along a path through the coarsening region are removed. Node pairs along opposite sides of the path are identified. The node pairs along the path are then merged to collapse the path.

  18. Pyrochemical properties of actinides elements

    International Nuclear Information System (INIS)

    Akabori, Mitsuo; Hayashi, Hirokazu; Minato, Kazuo

    2005-01-01

    The present status of research works on pyrochemical processing is introduced in view of: 1) the process concept; 2) R and D progress; 3) new experimental facilities in NUCEF. Basic laboratory studies with rare-earth elements have almost been completed and hot tests with americium have been started at the TRU-HITEC facility in NUCEF. (author)

  19. Elements of a Spatial Web

    DEFF Research Database (Denmark)

    Jensen, Christian S.

    2010-01-01

    and are relevant to a text argument. An important element in enabling such queries is to be able to rank spatial web objects. Another is to be able to determine the relevance of an object to a query. Yet another is to enable the efficient processing of such queries. The talk covers recent results on spatial web...

  20. Backfire antennas with dipole elements

    DEFF Research Database (Denmark)

    Nielsen, Erik Dragø; Pontoppidan, Knud

    1970-01-01

    A method is set up for a theoretical investigation of arbitrary backfire antennas based upon dipole structures. The mutual impedance between the dipole elements of the antenna is taken into account, and the field radiated due to a surface wave reflector of finite extent is determined by calculating...

  1. Main Elements for Upscaling Recreation

    DEFF Research Database (Denmark)

    Zandersen, Marianne; Termansen, Mette

    2012-01-01

    This report provides information on the main elements used to scale up modelled local visitor flow data to regional level based on recreational de-mand models. These models are described in Report #1. This report also provides information on data sources such as spatial data (e.g. land cov...

  2. Experimental search for superheavy elements

    International Nuclear Information System (INIS)

    Wieloch, A.

    2008-12-01

    This work reports on the experimental search for superheavy elements (SHE). Two types of approaches for SHE production are studied i.e. '' cold '' fusion mechanism and massive transfer mechanism. First mechanism was studied in normal and inverse kinematics, by using Wien filter at the GANIL facility. The production of SHE elements with Z 106 and 108 is reported while negative results on the synthesis of SHE elements with Z 114 and 118 was received. The other approach i.e. reactions induced by heavy ion projectiles (e.g. 172 Yb, 197 Au) on fissile target nuclei (e.g. 238 U, 232 Th) at near Coulomb barrier incident energies was studied by using superconducting solenoid installed Texas A(and)M University. Preliminary results for the reaction 197 Au(7.5 MeV/u) - 232 Th are presented where three cases of the possible candidates for SHE elements were found. A dedicated detection setup for such studies is discussed and the detailed data analysis is presented. Detection of alpha and spontaneous fission radioactive decays is used to unambiguously identify the atomic number of SHE. Special statistical analysis for a very low detected number of α decays is applied to check consistency of the αradioactive chains. (author)

  3. Names of the Heavier Elements

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 4; Issue 3. Names of the Heavier Elements. Jitendra K Bera. General Article Volume 4 Issue 3 March 1999 pp ... Author Affiliations. Jitendra K Bera1. Department of Inorganic and Physical Chemistry, Indian Institute of Science, Bangalore 560 012, India.

  4. Fuel element database: developer handbook

    International Nuclear Information System (INIS)

    Dragicevic, M.

    2004-09-01

    The fuel elements database which was developed for Atomic Institute of the Austrian Universities is described. The software uses standards like HTML, PHP and SQL. For the standard installation freely available software packages such as MySQL database or the PHP interpreter from Apache Software Foundation and Java Script were used. (nevyjel)

  5. Names of the Heavier Elements

    Indian Academy of Sciences (India)

    Although each element in the periodic table is unique due to its atomic number, it is obviously convenient to assign an appropriate name, and a symbol. One can then systematically name and represent compounds, from simple salts to coordination complexes. It is a generally accepted convention that the discoverer of an ...

  6. Compact Fuel Element Environment Test

    Science.gov (United States)

    Bradley, D. E.; Mireles, O. R.; Hickman, R. R.; Broadway, J. W.

    2012-01-01

    Deep space missions with large payloads require high specific impulse (I(sub sp)) and relatively high thrust to achieve mission goals in reasonable time frames. Conventional, storable propellants produce average I(sub sp). Nuclear thermal rockets (NTRs) capable of high I(sub sp) thrust have been proposed. NTR employs heat produced by fission reaction to heat and therefore accelerate hydrogen, which is then forced through a rocket nozzle providing thrust. Fuel element temperatures are very high (up to 3,000 K) and hydrogen is highly reactive with most materials at high temperatures. Data covering the effects of high-temperature hydrogen exposure on fuel elements are limited. The primary concern is the mechanical failure of fuel elements that employ high melting point metals, ceramics, or a combination (cermet) as a structural matrix into which the nuclear fuel is distributed. It is not necessary to include fissile material in test samples intended to explore high-temperature hydrogen exposure of the structural support matrices. A small-scale test bed designed to heat fuel element samples via noncontact radio frequency heating and expose samples to hydrogen for typical mission durations has been developed to assist in optimal material and manufacturing process selection without employing fissile material. This Technical Memorandum details the test bed design and results of testing conducted to date.

  7. Elemental Compositions of Extrasolar Planetesimals

    Science.gov (United States)

    Xu, Siyi; Jura, M.

    2014-01-01

    The composition of extrasolar rocky planets is essential for understanding the formation and evolution of these alien worlds. Studying externally-polluted white dwarfs provides the only method to directly measure the elemental compositions of extrasolar planetesimals, the building blocks of planets. The standard model is that some planetesimals can survive to the white dwarf phase, get perturbed, enter into the tidal radius of the white dwarf and get accreted, polluting its pure hydrogen or helium atmosphere. We have been performing high-resolution spectroscopic observations on a number of polluted white dwarfs to measure the bulk compositions of the accreted objects. To have a full picture of the abundance pattern, we gathered data from both Keck/HIRES and HST/COS. I will present the analysis for one of the most interesting objects -- G29-38. It is the first white dwarf identified with an infrared excess from debris of pulverized planetesimals and among the very first identified polluted hydrogen atmosphere white dwarfs. Our analysis indicates that the accreted extrasolar planetesimal is enhanced in refractory elements and depleted in volatile elements. A detailed comparison with solar system objects show that the observed composition can be best interpreted as a blend of chondritic object with some refractory-rich material, a result from post-nebular processing. When all polluted white dwarfs are viewed as an ensemble, we find that the elemental compositions of accreted extrasolar planetesimals resemble to those of solar system objects to zeroth order. (i) The big four elements, O, Fe, Mg and Si are also dominant. Objects with exotic compositions, e.g. diamond planets and refractory-dominated planets, are yet to be found. (ii) Volatiles, such as carbon and water, are only trace constituents. In terms of bulk composition, solar system objects are essentially normal.

  8. Superheavy-element spectroscopy: Correlations along element 115 decay chains

    Directory of Open Access Journals (Sweden)

    Rudolph D.

    2016-01-01

    Full Text Available Following a brief summary of the region of the heaviest atomic nuclei yet created in the laboratory, data on more than hundred α-decay chains associated with the production of element 115 are combined to investigate time and energy correlations along the observed decay chains. Several of these are analysed using a new method for statistical assessments of lifetimes in sets of decay chains.

  9. Modified 37-element bundle dryout

    Energy Technology Data Exchange (ETDEWEB)

    Tahir, A., E-mail: ab.tahir@amec.com [AMEC NSS Ltd., Fuel and Fuel Channel Safety Analysis, Ontario (Canada); Parlatan, Y., E-mail: yuksel.parlatan@opg.com [Ontario Power Generation Inc., Nuclear Safety Projects, Ontario (Canada); Kwee, M., E-mail: marc.kwee@brucepower.com [Bruce Power., Nuclear Safety Analysis and Support, Ontario (Canada); Liauw, W., E-mail: wie.kiong.liauw@opg.com [Ontario Power Generation Inc., Nuclear Safety Projects, Ontario (Canada); Hadaller, G.; Fortman, R., E-mail: ghadaller@sternlab.com, E-mail: rfortman@sternlab.com [Stern Labs Inc., Hamilton, Ontario (Canada)

    2011-07-01

    The Heat Transport Systems (HTS) of the Canadian nuclear reactors are ageing. One of the effects of ageing is the non-uniform change in the dimension of the reactor pressure tubes through the mechanism of diametral creep. The mechanism has the global effect of increasing channel flows and decreasing the reactor header-to-header pressure drop. However, the increased flow is not distributed uniformly through the fuel bundle cross-section because the bundle tends to settle at the bottom of the pressure tube leaving a crescent shaped space on the top. This portion experiences the bulk of the increased flow, as it offers the path of least hydraulic resistance. As a result of this flow bypass, the coolant flows through some of the interior-subchannels of the fuel bundle are reduced. For a given flow, inlet temperature and exit pressure, flow bypass in the top of the channel reduces flow from the interior subchannels and consequently reduces the Critical Heat Flux (CHF). To recover some of the reduction in dryout power, OPG started a program in 2004 to examine possible modifications to the reference 37-element bundles that may result in an increase in dryout powers for the uncrept and crept pressure tube. Under accident conditions, where CHF is a concern, the ideal design is one where all fuel elements reach dryout at the same time. The ASSERT subchannel code was used to explore potential modifications to the 37-element bundle that may result in increased dryout powers in an uncrept and crept pressure tube. In addition analysis of post-dryout tests in 37-element bundle were examined to explore the potential of increasing the dryout power of the reference 37-element bundle by slightly modifying the bundle geometry. A small reduction of the centre element in the bundle was selected as an approach to enhance the dryout power of the bundle. CHF tests of the modified bundle were performed. The measurement confirmed that the modified bundle has higher dryout powers than the

  10. Reliability-Based Optimization of Structural Elements

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard

    In this paper structural elements from an optimization point of view are considered, i.e. only the geometry of a structural element is optimized. Reliability modelling of the structural element is discussed both from an element point of view and from a system point of view. The optimization...

  11. Low cost, lightweight fuel cell elements

    Science.gov (United States)

    Kindler, Andrew (Inventor)

    2001-01-01

    New fuel cell elements for use in liquid feed fuel cells are provided. The elements including biplates and endplates are low in cost, light in weight, and allow high efficiency operation. Electrically conductive elements are also a part of the fuel cell elements.

  12. Finite elements methods in mechanics

    CERN Document Server

    Eslami, M Reza

    2014-01-01

    This book covers all basic areas of mechanical engineering, such as fluid mechanics, heat conduction, beams, and elasticity with detailed derivations for the mass, stiffness, and force matrices. It is especially designed to give physical feeling to the reader for finite element approximation by the introduction of finite elements to the elevation of elastic membrane. A detailed treatment of computer methods with numerical examples are provided. In the fluid mechanics chapter, the conventional and vorticity transport formulations for viscous incompressible fluid flow with discussion on the method of solution are presented. The variational and Galerkin formulations of the heat conduction, beams, and elasticity problems are also discussed in detail. Three computer codes are provided to solve the elastic membrane problem. One of them solves the Poisson’s equation. The second computer program handles the two dimensional elasticity problems, and the third one presents the three dimensional transient heat conducti...

  13. FUEL ELEMENT FOR NUCLEAR REACTORS

    Science.gov (United States)

    Bassett, C.H.

    1961-11-21

    A fuel element is designed which is particularly adapted for reactors of high power density used to generate steam for the production of electricity. The fuel element consists of inner and outer concentric tubes forming an annular chamber within which is contained fissionable fuel pellet segments, wedge members interposed between the fuel segments, and a spring which, acting with wedge members, urges said fuel pellets radially into contact against the inner surface of the outer tube. The wedge members may be a fertile material convertible into fissionable fuel material by absorbing neutrons emitted from the fissionable fuel pellet segments. The costly grinding of cylindrical fuel pellets to close tolerances for snug engagement is reduced because the need to finish the exact size is eliminated. (AEC)

  14. Automation of finite element methods

    CERN Document Server

    Korelc, Jože

    2016-01-01

    New finite elements are needed as well in research as in industry environments for the development of virtual prediction techniques. The design and implementation of novel finite elements for specific purposes is a tedious and time consuming task, especially for nonlinear formulations. The automation of this process can help to speed up this process considerably since the generation of the final computer code can be accelerated by order of several magnitudes. This book provides the reader with the required knowledge needed to employ modern automatic tools like AceGen within solid mechanics in a successful way. It covers the range from the theoretical background, algorithmic treatments to many different applications. The book is written for advanced students in the engineering field and for researchers in educational and industrial environments.

  15. Chemistry of the transactinide elements

    International Nuclear Information System (INIS)

    Schaedel, Matthias

    1996-01-01

    Synthesis and decay of elements in the upper end of periodic table (z=104 to 111) are described. In view of very short half-life of about 1 s, the production of the transactinide isotopes and their transport to the separation and detection chamber are to be necessarily carried out employing fast and reliable techniques. Advances in microchemical separation techniques such as OLGA-II, HEVI, ARCA-II and SISAK, coupled to sensitive detection methods enable the detection of these heavier transactinide elements at atomic level. Their position in the periodic table and similarities, if any, with the corresponding lighter homologs are discussed based on their predicted and observed chemical behaviour. (author). 70 refs., 15 figs

  16. Representation Elements of Spatial Thinking

    Science.gov (United States)

    Fiantika, F. R.

    2017-04-01

    This paper aims to add a reference in revealing spatial thinking. There several definitions of spatial thinking but it is not easy to defining it. We can start to discuss the concept, its basic a forming representation. Initially, the five sense catch the natural phenomenon and forward it to memory for processing. Abstraction plays a role in processing information into a concept. There are two types of representation, namely internal representation and external representation. The internal representation is also known as mental representation; this representation is in the human mind. The external representation may include images, auditory and kinesthetic which can be used to describe, explain and communicate the structure, operation, the function of the object as well as relationships. There are two main elements, representations properties and object relationships. These elements play a role in forming a representation.

  17. Integral nuclear fuel element assembly

    International Nuclear Information System (INIS)

    Schluderberg, D. C.

    1985-01-01

    An integral nuclear fuel element assembly utilizes longitudinally finned fuel pins. The continuous or interrupted fins of the fuel pins are brazed to fins of juxtaposed fuel pins or directly to the juxtaposed fuel pins or both. The integrally brazed fuel assembly is designed to satisfy the thermal and hydraulic requirements of a fuel assembly lattice having moderator to fuel atom ratios required to achieve high conversion and breeding ratios

  18. Blade-element/momentum theory

    DEFF Research Database (Denmark)

    Sørensen, Jens Nørkær

    2016-01-01

    Although there exists a large variety of methods for predicting performance and loadings of wind turbines, the only approach used today by wind turbine manufacturers is based on the blade-element/momentum (BEM) theory by Glauert (Aerodynamic theory. Springer, Berlin, pp. 169-360, 1935). A basic...... assumption in the BEM theory is that the flow takes place in independent stream tubes and that the loading is determined from two-dimensional sectional airfoil characteristics....

  19. Studying accelerometers with capacitive sensing elements

    OpenAIRE

    Ágoston Katalin

    2011-01-01

    This paper presents types and operating mode of vibration sensors. Differential capacitor sensing elements are often used in integrated accelerometers. It will be investigate the structure and transfer function of the seismic mass type sensing element. The article presents how the piezoelectric sensing element works and compares with capacitor sensing element and how can be modeled with an electronic circuit and Simulink models. The transfer functions of the capacitor sensing element models a...

  20. Elemental composition of cosmic ray

    International Nuclear Information System (INIS)

    Yanagida, Shohei

    1987-01-01

    The report first summarizes some data that have been obtained so far from observation of isotopes and elements in cosmic rays in the low energy region. Then, objectives of studies planned to be carried out with Astromag are outlined and the number of incident particles expected to be measured by baloon observation is estimated. Heavy elements with atomic numbers of greater than 30 are considered to be formed through neutron absorption reactions by the s- or r-process. Observations show that products of the r-process is abundant in cosmic ray sources. The escape length depends on energy. In relation to this, it has been reported that the ratios Ar-Fe and Ca-Fe increase above 200 GeV-n while such a tendency is not observed for K, Sc, Ti or V. Thus, no satisfactory models are available at present which can fully explain the changes in the escape length. The ratio 3 He- 4 He in the range of 5 - 10 GeV-n is inconsistent with the general theory that interprets the escape length of heavy elements. Some models, including the supermetallicity model and Wolf Rayet theory, have been proposed to explain unusual ratios of isotopes in cosmic rays, but more measurements are required to verify them. It is expected that Astromag can serve to make observations that can clarify these points. (Nogami, K.)

  1. Inorganic elements in sugar samples

    International Nuclear Information System (INIS)

    Salles, Paulo M.B. de; Campos, Tarcisio P.R. de

    2013-01-01

    Sugar is considered a safe food ingredient; however, it can be contaminated by organic elements since its planting until its production process. Thus, this study aims at checking the presence of inorganic elements in samples of crystal, refined and brown sugar available for consumption in Brazil. The applied technique was neutron activation analysis, the k 0 method, using the TRIGA MARK - IPR-R1 reactor located at CDTN/CNEN, in Belo Horizonte. It was identified the presence of elements such as, Au, Br, Co, Cr, Hf, K, Na, Sb, Sc and Zn in the samples of crystal/refined sugar and the presence of As, Au, Br, Ca, Co, Cr, Cs, Fe, Hf, K, Na, Sb, Sc, Sm, Sr, Th and Zn in the brown sugar samples. The applied technique was appropriate to this study because it was not necessary to put the samples in solution, essential condition in order to apply other techniques, avoiding contaminations and sample losses, besides allowing a multi elementary detection in different sugar samples. (author)

  2. Adobe Photoshop Elements 10 unleash the hidden performance of Elements

    CERN Document Server

    Galer, Mark

    2011-01-01

    Master the most powerful photo editing tools and techniques that Elements has to offer! Using step-by-step projects, Mark Galer will have you creating stunning images in no time at all. Whether you want to create impressive, seamless montages, optimize your photos for perfect print quality, or simply enhance your images for maximum impact, Maximum Performance will give you the skills and know-how you need to create professional quality results. Featured projects teach you how to work with multilayered 16 bit/channel files, as well as convert to black and white using Adobe Camera Raw, create

  3. Adobe Photoshop Elements 9 Unleash the hidden performance of Elements

    CERN Document Server

    Chattaraj, Abhijit

    2010-01-01

    Let Mark Galer guide you through the most powerful photo editing tools and techniques that Elements has to offer! A unique cominbtion of step-by-step projects, movie tutorials and sample images will have you creating stunning images in no time at all. Whether you want to enhance your images for maximum impact, optimize your photos for perfect print quality, or creating impressive, seamless montages, Maximum Performance will give you the skills and know-how to create professional quality results, enabling you get maximum performance from this credit crunch approved

  4. Peridynamic Multiscale Finite Element Methods

    Energy Technology Data Exchange (ETDEWEB)

    Costa, Timothy [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Bond, Stephen D. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Littlewood, David John [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Moore, Stan Gerald [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-12-01

    The problem of computing quantum-accurate design-scale solutions to mechanics problems is rich with applications and serves as the background to modern multiscale science research. The prob- lem can be broken into component problems comprised of communicating across adjacent scales, which when strung together create a pipeline for information to travel from quantum scales to design scales. Traditionally, this involves connections between a) quantum electronic structure calculations and molecular dynamics and between b) molecular dynamics and local partial differ- ential equation models at the design scale. The second step, b), is particularly challenging since the appropriate scales of molecular dynamic and local partial differential equation models do not overlap. The peridynamic model for continuum mechanics provides an advantage in this endeavor, as the basic equations of peridynamics are valid at a wide range of scales limiting from the classical partial differential equation models valid at the design scale to the scale of molecular dynamics. In this work we focus on the development of multiscale finite element methods for the peridynamic model, in an effort to create a mathematically consistent channel for microscale information to travel from the upper limits of the molecular dynamics scale to the design scale. In particular, we first develop a Nonlocal Multiscale Finite Element Method which solves the peridynamic model at multiple scales to include microscale information at the coarse-scale. We then consider a method that solves a fine-scale peridynamic model to build element-support basis functions for a coarse- scale local partial differential equation model, called the Mixed Locality Multiscale Finite Element Method. Given decades of research and development into finite element codes for the local partial differential equation models of continuum mechanics there is a strong desire to couple local and nonlocal models to leverage the speed and state of the

  5. Element-by-element parallel spectral-element methods for 3-D teleseismic wave modeling

    KAUST Repository

    Liu, Shaolin

    2017-09-28

    The development of an efficient algorithm for teleseismic wave field modeling is valuable for calculating the gradients of the misfit function (termed misfit gradients) or Fréchet derivatives when the teleseismic waveform is used for adjoint tomography. Here, we introduce an element-by-element parallel spectral-element method (EBE-SEM) for the efficient modeling of teleseismic wave field propagation in a reduced geology model. Under the plane-wave assumption, the frequency-wavenumber (FK) technique is implemented to compute the boundary wave field used to construct the boundary condition of the teleseismic wave incidence. To reduce the memory required for the storage of the boundary wave field for the incidence boundary condition, a strategy is introduced to efficiently store the boundary wave field on the model boundary. The perfectly matched layers absorbing boundary condition (PML ABC) is formulated using the EBE-SEM to absorb the scattered wave field from the model interior. The misfit gradient can easily be constructed in each time step during the calculation of the adjoint wave field. Three synthetic examples demonstrate the validity of the EBE-SEM for use in teleseismic wave field modeling and the misfit gradient calculation.

  6. 7 CFR 29.1101 - Elements of quality and degrees of each element.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Elements of quality and degrees of each element. 29... STANDARD CONTAINER REGULATIONS TOBACCO INSPECTION Standards Elements of Quality § 29.1101 Elements of quality and degrees of each element. These standardized words or terms are used to describe tobacco...

  7. 7 CFR 29.6081 - Elements of quality and degrees of each element.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Elements of quality and degrees of each element. 29... STANDARD CONTAINER REGULATIONS TOBACCO INSPECTION Standards Elements of Quality § 29.6081 Elements of quality and degrees of each element. These standardized words or terms are used to describe tobacco...

  8. 7 CFR 29.3586 - Elements of quality and degrees of each element.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Elements of quality and degrees of each element. 29... STANDARD CONTAINER REGULATIONS TOBACCO INSPECTION Standards Elements of Quality § 29.3586 Elements of quality and degrees of each element. These standardized words or terms are used to describe tobacco...

  9. 7 CFR 29.3101 - Elements of quality and degrees of each element.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Elements of quality and degrees of each element. 29... STANDARD CONTAINER REGULATIONS TOBACCO INSPECTION Standards Elements of Quality § 29.3101 Elements of quality and degrees of each element. These standardized words or terms are used to describe tobacco...

  10. Nuclear reactor fuel element sub-assemblies

    International Nuclear Information System (INIS)

    Dodd, J.A.; Ashton, M.W.; Aubertin, J.C.

    1975-01-01

    Reference is made to fuel element sub-assemblies for use in a Na cooled fast reactor. Such sub-assemblies may comprise a hexagonal bundle of slender fuel elements enclosed in a tubular sleeve, often referred to as a 'wrapper'. The fuel elements are spaced apart by helical wire wraps forming fins and which also space the wrapper from the bundle. The wire wraps make contact with the sheaths of adjacent elements and with the wrapper, so that each fuel element is well supported against thermal, bowing, rattling and vibration, whilst allowing adequate coolant flow passages through the bundle. The arrangement of the fuel elements usually provides two groups of passageways for coolant flow through the bundle -an inner group each bounded by four fuel elements, and an outer group each bounded by two outer fuel elements and the wrapper. It has been found, however, that this arrangement results in over-cooling of the outer fuel elements. An arrangement is described that overcomes this disadvantage to a considerable extent. The fuel elements are arranged in three groups - an inner group, and intermediate group and an outer group. The fins on the outer group elements are helically wound at half the pitch of the other two groups and alternate outer group elements are wound opposite handed to abutting outer row elements; elements of the outer and intermediate groups are orientated and end located to enable them to nest together. By utilising half pitch helical fins on the outer elements a greater number of lateral support points is obtained for the outer and intermediate groups of elements and the increased number of turns of fins on the outer elements assist in reducing overcooling of the outer elements. (U.K.)

  11. Duration judgements over multiple elements

    Directory of Open Access Journals (Sweden)

    Inci eAyhan

    2012-11-01

    Full Text Available We investigated the limits of the number of events observers can simultaneously time. For single targets occurring in one of eight positions sensitivity to duration was improved for spatially pre-cued items as compared to post-cued items indicating that exogenous driven attention can improve duration discrimination. Sensitivity to duration for pre-cued items was also marginally better for single items as compared to eight items indicating that even after the allocation of focal attention, distracter items can interfere with the encoding of duration. For an eight item array discrimination was worse for post-cued locations as compared to pre-cued locations indicating both that attention can improve duration discrimination performance and that it was not possible to access a perfect memory trace of the duration of eight elements. The interference from the distracters in the pre-cued eight item array may reflect some mandatory averaging of target and distracter events. To further explore duration averaging we asked subjects to explicitly compare average durations of multiple item arrays against a single item standard duration. Duration discrimination thresholds were significantly lower for single elements as compared to multiple elements, showing that averaging, either automatically or intentionally, impairs duration discrimination. There was no set size effect. Performance was the same for averages of two and eight items, but performance with even an average of two items was worse than for one item. This was also true for sequential presentation indicating poor performance was not due to limits on the division of attention across items. Rather performance appears to be limited by an inability to remember or aggregate duration information from two or more items. Although it is possible to manipulate perceived duration locally, there appears to be no perceptual mechanisms for aggregating local durations across space.

  12. Fluidic Elements based on Coanda Effect

    Directory of Open Access Journals (Sweden)

    Constantin OLIVOTTO

    2010-12-01

    Full Text Available This paper contains first some definitions and classifications regarding the fluidic elements. Thegeneral current status is presented, nominating the main specific elements based on the Coanda effect developedspecially in Romania. In particularly the development of an original bistable element using industrial compressedair at industrial pressure supply is presented. The function of this element is based on the controlled attachmentof the main jet at a curved wall through the Coanda effect. The methods used for particular calculation andexperiments are nominated. The main application of these elements was to develop a specific execution element:a fluidic step–by-step motor based on the Coanda effect.

  13. Unified fuel elements development for research reactors

    International Nuclear Information System (INIS)

    Vatulin, A.; Stetsky, Y.; Dobrikova, I.

    1998-01-01

    Square cross-section rod type fuel elements have been developed for russian pool-type research reactors. new fuel elements can replace the large nomenclature of tubular fuel elements with around, square and hexahedral cross-sections and to solve a problem of enrichment reduction. the fuel assembly designs with rod type fuel elements have been developed. The overall dimensions of existing the assemblies are preserved in this one. the experimental-industrial fabricating process of fuel elements, based on a joint extrusion method has been developed. The fabricating process has been tested in laboratory conditions, 150 experimental fuel element samples of the various sizes were produced. (author)

  14. Monitoring arrangement for vented nuclear fuel elements

    Science.gov (United States)

    Campana, Robert J.

    1981-01-01

    In a nuclear fuel reactor core, fuel elements are arranged in a closely packed hexagonal configuration, each fuel element having diametrically opposed vents permitting 180.degree. rotation of the fuel elements to counteract bowing. A grid plate engages the fuel elements and forms passages for communicating sets of three, four or six individual vents with respective monitor lines in order to communicate vented radioactive gases from the fuel elements to suitable monitor means in a manner readily permitting detection of leakage in individual fuel elements.

  15. Essential Grid Workflow Monitoring Elements

    Energy Technology Data Exchange (ETDEWEB)

    Gunter, Daniel K.; Jackson, Keith R.; Konerding, David E.; Lee,Jason R.; Tierney, Brian L.

    2005-07-01

    Troubleshooting Grid workflows is difficult. A typicalworkflow involves a large number of components networks, middleware,hosts, etc. that can fail. Even when monitoring data from all thesecomponents is accessible, it is hard to tell whether failures andanomalies in these components are related toa given workflow. For theGrid to be truly usable, much of this uncertainty must be elim- inated.We propose two new Grid monitoring elements, Grid workflow identifiersand consistent component lifecycle events, that will make Gridtroubleshooting easier, and thus make Grids more usable, by simplifyingthe correlation of Grid monitoring data with a particular Gridworkflow.

  16. Entropy conservative finite element schemes

    Science.gov (United States)

    Tadmor, E.

    1986-01-01

    The question of entropy stability for discrete approximations to hyperbolic systems of conservation laws is studied. The amount of numerical viscosity present in such schemes is quantified and related to their entropy stability by means of comparison. To this end, two main ingredients are used: entropy variables and the construction of certain entropy conservative schemes in terms of piecewise-linear finite element approximations. It is then shown that conservative schemes are entropy stable, if and (for three-point schemes) only if, they contain more numerical viscosity than the abovementioned entropy conservation ones.

  17. Elements of partial differential equations

    CERN Document Server

    Sneddon, Ian Naismith

    1957-01-01

    Geared toward students of applied rather than pure mathematics, this volume introduces elements of partial differential equations. Its focus is primarily upon finding solutions to particular equations rather than general theory.Topics include ordinary differential equations in more than two variables, partial differential equations of the first and second orders, Laplace's equation, the wave equation, and the diffusion equation. A helpful Appendix offers information on systems of surfaces, and solutions to the odd-numbered problems appear at the end of the book. Readers pursuing independent st

  18. Transportation of irradiated fuel elements

    International Nuclear Information System (INIS)

    Preece, A.H.

    1980-01-01

    The report falls under the headings: introduction (explaining the special interest of the London Borough of Brent, as forming part of the route for transportation of irradiated fuel elements); nuclear power (with special reference to transport of spent fuel and radioactive wastes); the flask aspect (design, safety regulations, criticisms, tests, etc.); the accident aspect (working manual for rail staff, train formation, responsibility, postulated accident situations); the emergency arrangements aspect; the monitoring aspect (health and safety reports); legislation; contingency plans; radiation - relevant background information. (U.K.)

  19. Elements of abstract harmonic analysis

    CERN Document Server

    Bachman, George

    2013-01-01

    Elements of Abstract Harmonic Analysis provides an introduction to the fundamental concepts and basic theorems of abstract harmonic analysis. In order to give a reasonably complete and self-contained introduction to the subject, most of the proofs have been presented in great detail thereby making the development understandable to a very wide audience. Exercises have been supplied at the end of each chapter. Some of these are meant to extend the theory slightly while others should serve to test the reader's understanding of the material presented. The first chapter and part of the second give

  20. INDUSTRIAL DESIGN ELEMENTS IN MARKETING

    Directory of Open Access Journals (Sweden)

    TOCARIU Liliana

    2015-06-01

    Full Text Available Industrial design represents an important 20th century phenomenon, which contributed to the spectacular development of human society. There are a lot of domains in which the insertion of the industrial design methods and theories is extremely necessary, becoming common practice. Marketing uses industrial design elements in order to draw up advertisements for products, to develop logos or packaging with all its attached factors, to organise promotional sales with the view of penetrating a certain market or of appealing to a large number of consumers.

  1. Basic Elements of Knowledge Management

    Directory of Open Access Journals (Sweden)

    Marcin W. Staniewski

    2007-10-01

    Full Text Available The article is a review of basic knowledge management terminology. It presents such a description as: knowledge resources levels (data, information, knowledge, and wisdom, knowledge sources (internal, external, and knowledge typology (implicit, tacit or individual, social. Moreover the article characterizes knowledge management process, knowledge management system and main knowledge management strategies (codification, personalization. At the end of the article there is mentioned the knowledge creating process (the concept of knowledge creation spiral and the role of Intelligence Technology (IT and organizational culture as main elements supporting knowledge management implementation in organizations.

  2. Spacer grid for fuel elements

    International Nuclear Information System (INIS)

    Hensolt, T.; Huenner, M.; Rau, P.; Veca, A.

    1978-01-01

    The spacer grid for fuel elements of a gas-cooled fast breeder reactor (but also for PWRs and BWRs) consists of a lattice field with dodecagonal meshes. These meshes are formed by three each adjacent hexagons grouped arround a central axis. The pairs of legs extending into the dodecagon and being staggered by 120 0 are designed as knubs with inclined abutting surfaces for the fuel rods. By this means there is formed a three-point bearing for centering the fuel rods. The spacer grid mentioned above is rough-worked from a single disc- resp. plate-shaped body (unfinished piece). (DG) [de

  3. Spacer grid for fuel elements

    International Nuclear Information System (INIS)

    Hensolt, T.; Huenner, M.; Rau, P.; Veca, A.

    1980-01-01

    The spacer grid for fuel elements of a gas-cooled fast breeder reactor (but also for PWRs and BWRs) consists of a lattice field with dodecagonal meshes. These meshes are formed by three each adjacent hexagons grouped arround a central axis. The pairs of legs extending into the dodecagon and being staggered by 120 are designed as knubs with inclined abutting surfaces for the fuel rods. By this means there is formed a three-point bearing for centering the fuel rods. The spacer grid mentioned above is rough-worked from a single disc- resp. plate-shaped body (unfinished piece). (orig.)

  4. The Plasmodium export element revisited.

    Directory of Open Access Journals (Sweden)

    Jan Alexander Hiss

    Full Text Available We performed a bioinformatical analysis of protein export elements (PEXEL in the putative proteome of the malaria parasite Plasmodium falciparum. A protein family-specific conservation of physicochemical residue profiles was found for PEXEL-flanking sequence regions. We demonstrate that the family members can be clustered based on the flanking regions only and display characteristic hydrophobicity patterns. This raises the possibility that the flanking regions may contain additional information for a family-specific role of PEXEL. We further show that signal peptide cleavage results in a positional alignment of PEXEL from both proteins with, and without, a signal peptide.

  5. Elemental composition of Malawian rice.

    Science.gov (United States)

    Joy, Edward J M; Louise Ander, E; Broadley, Martin R; Young, Scott D; Chilimba, Allan D C; Hamilton, Elliott M; Watts, Michael J

    2017-08-01

    Widespread potential dietary deficiencies of calcium (Ca), iron (Fe), iodine (I), selenium (Se) and zinc (Zn) have been identified in Malawi. Several deficiencies are likely to be compounded by high phytic acid (PA) consumption. Rice (Oryza sativa) is commonly consumed in some Malawian populations, and its mineral micronutrient content is important for food security. The considerable irrigation requirements and flooded conditions of paddy soils can also introduce or mobilise potentially toxic elements including arsenic (As), cadmium (Cd) and lead (Pb). The aim of this study was to determine the mineral composition of rice sampled from farmers' fields and markets in Malawi. Rice was sampled from 18 extension planning areas across Malawi with 21 white (i.e. polished) and 33 brown samples collected. Elemental composition was determined by inductively coupled plasma-mass spectrometry (ICP-MS). Arsenic speciation was performed using high-performance liquid chromatography (HPLC)-ICP-MS. Concentration of PA was determined using a PA-total phosphorus assay. Median total concentrations (mg kg -1 , dry weight) of elements important for human nutrition in brown and white rice, respectively, were: Ca = 66.5 and 37.8; Cu = 3.65 and 2.49; Fe = 22.1 and 7.2; I = 0.006 and rice samples, respectively, median PA concentrations were 5438 and 1906 mg kg -1 , and median PA:Zn molar ratios were 29 and 13. Concentrations of potentially toxic elements (mg kg -1 , dry weight) in brown and white rice samples, respectively, were: As = 0.030 and 0.006; Cd  ≤ 0.002 and 0.006; Pb = 0.008 and 0.008. Approximately 95 % of As was found to be inorganic As, where this could be quantified. Malawian rice, like the more widely consumed staple grain maize, contains inadequate Ca, I, Se or Zn to meet dietary requirements. Biofortification strategies could significantly increase Se and Zn concentrations and require further investigation. Concentrations of Fe in rice grain varied

  6. METHOD OF MAKING FUEL ELEMENTS

    Science.gov (United States)

    Bean, C.H.; Macherey, R.E.

    1959-12-01

    A method is described for fabricating fuel elements, particularly for enclosing a plate of metal with a second metal by inserting the plate into an aperture of a frame of a second plate, placing a sheet of the second metal on each of opposite faces of the assembled plate and frame, purging with an inert gas the air from the space within the frame and the sheets while sealing the seams between the frame and the sheets, exhausting the space, purging the space with air, re-exhausting the spaces, sealing the second aperture, and applying heat and pressure to bond the sheets, the plate, and the frame to one another.

  7. METHODOLOGICAL ELEMENTS OF SITUATIONAL ANALYSIS

    Directory of Open Access Journals (Sweden)

    Tetyana KOVALCHUK

    2016-07-01

    Full Text Available The article deals with the investigation of theoretical and methodological principles of situational analysis. The necessity of situational analysis is proved in modern conditions. The notion “situational analysis” is determined. We have concluded that situational analysis is a continuous system study which purpose is to identify dangerous situation signs, to evaluate comprehensively such signs influenced by a system of objective and subjective factors, to search for motivated targeted actions used to eliminate adverse effects of the exposure of the system to the situation now and in the future and to develop the managerial actions needed to bring the system back to norm. It is developed a methodological approach to the situational analysis, its goal is substantiated, proved the expediency of diagnostic, evaluative and searching functions in the process of situational analysis. The basic methodological elements of the situational analysis are grounded. The substantiation of the principal methodological elements of system analysis will enable the analyst to develop adaptive methods able to take into account the peculiar features of a unique object which is a situation that has emerged in a complex system, to diagnose such situation and subject it to system and in-depth analysis, to identify risks opportunities, to make timely management decisions as required by a particular period.

  8. Cosmic Feast of the Elements

    Science.gov (United States)

    Morisset, C.; Delgado-Inglada, G.; García-Rojas, J.

    2017-11-01

    In the past few decades most of our understanding of the history and chemical evolution of galaxies has been guided by the study of their stars and gaseous nebulae. Nebulae, thanks to their bright emission lines, are especially useful tracers of chemical elements from the very center to the outskirts of galaxies. In order to pin down the chemical abundances in nebulae, we must rely on careful analysis of emission lines combined with detailed models of the microscopic physical processes inside nebulae and state-of-the-art atomic data. Another important piece of the puzzle is the interplay between galaxy evolution and the activity of their central engines either as optical AGNs or radio jets. Last but not least, let us not forget the huge population of lineless, retired galaxies ionized by hot low-mass evolved stars: after nuclear and star formation activity quiets down, retired galaxies are the natural consequence of galaxy evolution. Grażyna Stasińska has made important contributions to each and every one of those aspects. This conference is to honor her work. We invite you to take part and share the latest news on this cosmic feast that transmutes chemical species, the onward journey of elements inside and outside galaxies either as lonely atoms or gregarious molecules and crystals, and their recycling in stars, which starts the cosmic feast all over again.

  9. Scarcity of rare earth elements.

    Science.gov (United States)

    de Boer, M A; Lammertsma, K

    2013-11-01

    Rare earth elements (REEs) are important for green and a large variety of high-tech technologies and are, therefore, in high demand. As a result, supply with REEs is likely to be disrupted (the degree of depends on the REE) in the near future. The 17 REEs are divided into heavy and light REEs. Other critical elements besides REEs, identified by the European Commission, are also becoming less easily available. Although there is no deficiency in the earth's crust of rare earth oxides, the economic accessibility is limited. The increased demand for REEs, the decreasing export from China, and geopolitical concerns on availability contributed to the (re)opening of mines in Australia and the USA and other mines are slow to follow. As a result, short supply of particularly terbium, dysprosium, praseodymium, and neodymium is expected to be problematic for at least the short term, also because they cannot be substituted. Recycling REEs from electronic waste would be a solution, but so far there are hardly any established REE recycling methods. Decreasing the dependency on REEs, for example, by identifying possible replacements or increasing their efficient use, represents another possibility. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. Radionuclides in forest biogeocenose elements

    International Nuclear Information System (INIS)

    Bulavik, I.M.; Zhuchenko, T.A.

    1992-01-01

    In 1991 year investigations are made on a studying of the radionuclide distribution (CS-137 and Sr-90) through the main forest biogeocenose elements (a litter a mineral soil layer, overground trees parts) on 5 experimental objects of Gomel' region with a various contamination. Radiation characters of the objects are done. As compared with 1989 year cesium and strontium migration from tress into the litter and from the litter to the soil is shown. In the litter and upper soil layer (5 m) contents of Cs-137 and Sr-90 are 95 and 80% accordingly. The Sr-90 concentration in the wood and the isotope concentration change through yearly layers (1986-1991 years) are studied. Wood layers formed to the accident have a lesser cesium concentration, especially in the oax-tree. The highest Cs and Se translocation, into the wood is noted in the pine the lesse one in the oax-tree. Among all elements of the biogeocenose the highest Cs-137 concentration the litter has and then one-year-old shoots, needles, lives, the bark and the wood go on. Even on the sixth year after the accident Cs concentration in the wood was 20-30 times less, than the one in needes and one-year-old shoot of this year. 4 refs.; 5 tabs

  11. Finite element and boundary element applications in quantum mechanics

    International Nuclear Information System (INIS)

    Ueta, Tsuyoshi

    2003-01-01

    Although this book is one of the Oxford Texts in Applied and Engineering Mathematics, we may think of it as a physics book. It explains how to solve the problem of quantum mechanics using the finite element method (FEM) and the boundary element method (BEM). Many examples analysing actual problems are also shown. As for the ratio of the number of pages of FEM and BEM, the former occupies about 80%. This is, however, reasonable reflecting the flexibility of FEM. Although many explanations of FEM and BEM exist, most are written using special mathematical expressions and numerical computation fields. However, this book is written in the 'language of physicists' throughout. I think that it is very readable and easy to understand for physicists. In the derivation of FEM and the argument on calculation accuracy, the action integral and a variation principle are used consistently. In the numerical computation of matrices, such as simultaneous equations and eigen value problems, a description of important points is also fully given. Moreover, the practical problems which become important in the electron device design field and the condensed matter physics field are dealt with as example computations, so that this book is very practical and applicable. It is characteristic and interesting that FEM is applied to solve the Schroedinger and Poisson equations consistently, and to the solution of the Ginzburg--Landau equation in superconductivity. BEM is applied to treat electric field enhancements due to surface plasmon excitations at metallic surfaces. A number of references are cited at the end of all the chapters, and this is very helpful. The description of quantum mechanics is also made appropriately and the actual application of quantum mechanics in condensed matter physics can also be surveyed. In the appendices, the mathematical foundation, such as numerical quadrature formulae and Green's functions, is conveniently described. I recommend this book to those who need to

  12. Multimodal transportation best practices and model element.

    Science.gov (United States)

    2014-06-01

    This report provides guidance in developing a multimodal transportation element of a local government comprehensive : plan. Two model elements were developed to address differences in statutory requirements for communities of different : sizes and pl...

  13. Natural wetland emissions of methylated trace elements

    NARCIS (Netherlands)

    Vriens, B.; Lenz, M.; Charlet, L.; Berg, M.; Winkel, L.H.E.

    2014-01-01

    Natural wetlands are well known for their significant methane emissions. However, trace element emissions via biomethylation and subsequent volatilization from pristine wetlands are virtually unstudied, even though wetlands constitute large reservoirs for trace elements. Here we show that the

  14. The heaviest elements: Past, present and future

    International Nuclear Information System (INIS)

    Hoffman, D.C.

    1990-01-01

    The region referred to be the designation heaviest elements has been a moving target ever since the production and the first identification of neptunium in 1940. The heaviest elements rapidly got heavier and, when their ACS Division of Nuclear Chemistry and Technology was formed in 1964, the elements through lawrencium (103) had been discovered. However, the chemical properties of nobelium and lawrencium had not yet been investigated. A program to produce transplutonium isotopes for studies of their chemical and nuclear properties and to provide targets for production of still heavier elements was initiated in the early 1960s. Since then, using targets in the lead region as well, the heaviest elements have been extended through element 109. A brief review of their progress in the past 25 years, the current state of their knowledge of the heaviest elements, and some predictions about what the heaviest elements may be 25 years from now will be given

  15. Chemistry of transuranium elements and compounds

    International Nuclear Information System (INIS)

    Haire, R.G.

    1982-01-01

    The following were studied: transplutonium elements and their compounds, lanthanide and actinide phosphates, decay, spectra of complexes, synthesis of superheavy elements (SHE), search for a SHE in Atlantic-II hot brines

  16. Bounded elements in Locally C*-algebras

    International Nuclear Information System (INIS)

    El Harti, Rachid

    2001-09-01

    In order to get more useful information about Locally C*-algebras, we introduce in this paper the notion of bounded elements. First, we study the connection between bounded elements and spectrally bounded elements. Some structural results of Locally C*-algebras are established in Theorems 1 , 2 and 3. As an immediate consequence of Theorem 3, we give a characterization of the connected component of the identity in the group of unitary elements for a Locally C*-algebra. (author)

  17. Integrating Environmentally Responsive Elements in Buildings

    DEFF Research Database (Denmark)

    Heiselberg, Per

    2006-01-01

    Significant improvement have been achieved on efficiency improvements of specific building elements like the building envelope and building equipment and services and whilst most building elements still offer opportunities for efficiency improvements, the greatest future potential lie with techno......Significant improvement have been achieved on efficiency improvements of specific building elements like the building envelope and building equipment and services and whilst most building elements still offer opportunities for efficiency improvements, the greatest future potential lie...

  18. Analytic matrix elements with shifted correlated Gaussians

    DEFF Research Database (Denmark)

    Fedorov, D. V.

    2017-01-01

    Matrix elements between shifted correlated Gaussians of various potentials with several form-factors are calculated analytically. Analytic matrix elements are of importance for the correlated Gaussian method in quantum few-body physics.......Matrix elements between shifted correlated Gaussians of various potentials with several form-factors are calculated analytically. Analytic matrix elements are of importance for the correlated Gaussian method in quantum few-body physics....

  19. Solid finite elements through three decades

    OpenAIRE

    Venkatesh, DN; Shrinivasa, U

    1994-01-01

    conventionally, solid finite elements have been looked upon as just generalizations of two-dimensional finite elements. In this article we trace their development starting from the days of their inception. Keeping in tune with our perceptions on developing finite elements, without taking recourse to any extra variational techniques, we discuss a few of the techniques which have been applied to solid finite elements. Finally we critically examine our own work on formulating solid finite elemen...

  20. Use of SCC in Prefabricated Concrete Elements

    DEFF Research Database (Denmark)

    Thrane, Lars Nyholm; Lauritsen, Ib

    2004-01-01

    This paper presents observations made on the use of self-compacting concrete for pre-cast elements at Byggebjerg Beton A/S during the last 3 years. The elements include L- and sandwich elements and are mainly produced for agriculture purposes. In general, the flow properties and air content...

  1. 47 CFR 97.503 - Element standards.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Element standards. 97.503 Section 97.503... SERVICE Qualifying Examination Systems § 97.503 Element standards. A written examination must be such as... question set as follows: (a) Element 2: 35 questions concerning the privileges of a Technician Class...

  2. 47 CFR 97.505 - Element credit.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Element credit. 97.505 Section 97.505... SERVICE Qualifying Examination Systems § 97.505 Element credit. (a) The administering VEs must give credit... operator license grant: Elements 2 and 3. (2) An unexpired (or expired but within the grace period for...

  3. DIFFERENT ELEMENT METHODS IN ENGINEERING PRACTICE

    African Journals Online (AJOL)

    2012-11-03

    Nov 3, 2012 ... Presented is the most common element methods used for analysis in engineering. The methods are discussed in an overall and ... The Finite Element Method (FEM). 3. The Finite Element Difference (FED). 4. .... large extent to the background of structural mechanics as the physical meaning of the steps of ...

  4. Mobile genetic elements in protozoan parasites

    Indian Academy of Sciences (India)

    Unknown

    function of these genetic elements. [Bhattacharya S., Bakre A. and Bhattacharya A. 2002 Mobile genetic ... The LTR elements have remarkable structural and functional resemblance to retroviruses, and ..... ponsible for antigenic variation, a possible role of these elements may be in the evolution of VSG gene reper- toires by ...

  5. Innovative Elastomeric Element for Earthquake Isolation

    Directory of Open Access Journals (Sweden)

    Vasile Iancu

    2012-09-01

    Full Text Available A modern tool to study the behavior of elastomeric elements for earthquake isolation is the Finite Element Method. The results of the simulations obtained in this way provide a large series of data about the behavior of the elastomeric elements under different types of loads and help in taking right decisions regarding geometrical optimizations needed for improve such kind of devices.

  6. Determination of toxic elements in Malaysian foodstuffs

    International Nuclear Information System (INIS)

    Hamzah, Z.; Wood, A.K.H.; Mahmood, C.S.; Hamzah, S.

    1988-01-01

    This project is concentrating on the analysis of toxic elements content in seafoods including fishes, mussel, squid and prawn. Samples were collected from various places throughout Malay Peninsular. Samples were prepared according to RCA research protocol - nuclear techniques for toxic element in foodstuffs. Techniques used for elemental analysis were neutron activation analysis (instrumental and radiochemical) and anodic stripping voltametry. (author). 9 refs, 9 tabs

  7. 40 CFR 721.10068 - Elemental mercury.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Elemental mercury. 721.10068 Section... Substances § 721.10068 Elemental mercury. (a) Definitions. The definitions in § 721.3 apply to this section... elemental mercury (CAS. No. 7439-97-6) is subject to reporting under this section for the significant new...

  8. On higher order pyramidal finite elements

    Czech Academy of Sciences Publication Activity Database

    Liu, L.; Davies, K.B.; Křížek, Michal; Guan, L.

    2011-01-01

    Roč. 3, č. 2 (2011), s. 131-140 ISSN 2070-0733 R&D Projects: GA AV ČR(CZ) IAA100190803 Institutional research plan: CEZ:AV0Z10190503 Keywords : pyramidal polynomial basis functions * finite element method * composite elements * three-dimensional mortar elements Subject RIV: BA - General Mathematics Impact factor: 0.750, year: 2011

  9. Stable propagation of 'selfish'genetic elements

    Indian Academy of Sciences (India)

    These elements exhibit a variety of `selfish' strategies to ensure their replication and propagation during the growth of their host cells. To establish long-term ... The 2 m plasmid of Saccharomyces cerevisiae and related yeast plasmids provide models for optimized eukaryotic selfish DNA elements. Selfish DNA elements ...

  10. Detector for failed fuel elements

    International Nuclear Information System (INIS)

    Ito, Masaru.

    1979-01-01

    Purpose: To provide automatic monitor for the separation or reactor water and sampling water, in a failed fuel element detector using a sipping chamber. Constitution: A positional detector for the exact mounting of a sipping chamber on a channel box and a level detector for the detection of complete discharge of cooling water in the sipping chamber are provided in the sipping chamber. The positional detector is contacted to the upper end of the channel box and operated when the sipping chamber is correctly mounted to the fuel assemblies. The level detector comprises a float and a limit switch and it is operated when the water in the sipping chamber is discharged by a predetermined amount. Isolation of reactor water and sampling water are automatically monitored by the signal from these two detectors. (Ikeda, J.)

  11. Zinc: a multipurpose trace element

    Energy Technology Data Exchange (ETDEWEB)

    Stefanidou, M.; Maravelias, C.; Dona, A.; Spiliopoulou, C. [University of Athens, Department of Forensic Medicine and Toxicology, Athens (Greece)

    2006-01-01

    Zinc (Zn) is one of the most important trace elements in the body and it is essential as a catalytic, structural and regulatory ion. It is involved in homeostasis, in immune responses, in oxidative stress, in apoptosis and in ageing. Zinc-binding proteins (metallothioneins, MTs), are protective in situations of stress and in situations of exposure to toxic metals, infections and low Zn nutrition. Metallothioneins play a key role in Zn-related cell homeostasis due to their high affinity for Zn, which is in turn relevant against oxidative stress and immune responses, including natural killer (NK) cell activity and ageing, since NK activity and Zn ion bioavailability decrease in ageing. Physiological supplementation of Zn in ageing and in age-related degenerative diseases corrects immune defects, reduces infection relapse and prevents ageing. Zinc is not stored in the body and excess intakes result in reduced absorption and increased excretion. Nevertheless, there are cases of acute and chronic Zn poisoning. (orig.)

  12. Elements of algebraic coding systems

    CERN Document Server

    Cardoso da Rocha, Jr, Valdemar

    2014-01-01

    Elements of Algebraic Coding Systems is an introductory text to algebraic coding theory. In the first chapter, you'll gain inside knowledge of coding fundamentals, which is essential for a deeper understanding of state-of-the-art coding systems. This book is a quick reference for those who are unfamiliar with this topic, as well as for use with specific applications such as cryptography and communication. Linear error-correcting block codes through elementary principles span eleven chapters of the text. Cyclic codes, some finite field algebra, Goppa codes, algebraic decoding algorithms, and applications in public-key cryptography and secret-key cryptography are discussed, including problems and solutions at the end of each chapter. Three appendices cover the Gilbert bound and some related derivations, a derivation of the Mac- Williams' identities based on the probability of undetected error, and two important tools for algebraic decoding-namely, the finite field Fourier transform and the Euclidean algorithm f...

  13. Getter for nuclear fuel elements

    International Nuclear Information System (INIS)

    Ross, W.T.; Williamson, H.E.

    1976-01-01

    A nuclear fuel element for use in the core of a nuclear reactor is disclosed and has disposed therein an improved getter capable of gettering reactive gases including a source of hydrogen. The getter comprises a composite with a substrate having thereon a coating capable of gettering reactive gases. The substrate has a greater coefficient of thermal expansion than does the coating, and over a period of time at reactor operating temperatures any protective film on the coating is fractured at various places and fresh portions of the coating are exposed to getter reactive gases. With further passage of time at reactor operating temperatures a fracture of the protective film on the coating will grow into a crack in the coating exposing further portions of the coating capable of gettering reactive gases. 13 claims, 5 drawing figures

  14. Getter for nuclear fuel elements

    International Nuclear Information System (INIS)

    Ross, W.T.; Williamson, H.E.

    1976-01-01

    A nuclear fuel element for use in the core of a nuclear reactor is disclosed and has disposed therein an improved getter capable of gettering reactive gases including a source of hydrogen. The getter comprises a composite with a substrate having thereon a coating capable of gettering reactive gases. The substrate has a greater coefficient of thermal expansion than does the coating, and over a period of time at reactor operating temperatures any protective film on the coating is fractured at various places and fresh portions of the coating are exposed to getter reactive gases. With further passage of time at reactor operating temperatures a fracture of the protective film on the coating will grow into a crack in the coating exposing further portions of the coating capable of gettering reactive gases

  15. Thermionic fuel element technology status

    Science.gov (United States)

    Holland, J. W.; Horner, M. W.; Yang, L.

    1985-01-01

    The results of research, conducted between the mid-1960s and 1973, on the multiconverter thermionic fuel elements (TFEs) that comprise the reactor core of an SP-100 thermionic reactor system are presented. Fueled-emitter technology, insulator technology and cell and TFE assembly technology of the prototypical TFEs which were tested in-pile and out-of-pile during these years are described. The proto-TFEs have demonstrated reproducible performance within 5 percent and no premature failures within the 1.5 yr of operation (with projected 3-yr lifetimes). The two primary life-limiting factors had been identified as thermionic emitter dimensional increase due to interactions with the fuel and electrical insulator structural damage from fast neutrons. Multiple options for extending TFE lifetimes to 7 yr or longer are available and will be investigated in the 1984-1985 SP-100 program for resolution of critical technology issues. Design diagrams and test graphs are included.

  16. Trace Element Analysis of Selenium

    International Nuclear Information System (INIS)

    Soliman, M.S.A.

    2010-01-01

    The present thesis divided into four chapters as follows:Chapter (1):This chapter contains an introduction on different oxidation states of organic and inorganic species for selenium in environmental and biological samples, the process for separation of selenium from these samples and the importance of selenium as a component for these samples. Also gives notes about the techniques which are used in the elemental analysis for selenium species and the detection limits for selenium in these techniques, selenium species in human body and the importance of these species in protecting the body from the different types of cancer and the sources of selenium in environmental samples (soil and water) and distribution levels of selenium in these samples.Chapter (2):This chapter is divided into two parts :The first part deals with the sample collection process for environmental samples (underground water, soil) and the wet digestion ( microwave digestion ) process of soil samples. It also contains the theory of work of the closed microwave digestion system.The second part contains detailed information concerning the theoretical considerations of the used analytical techniques. These techniques include Hydride generation - Atomic Absorption Spectrometer (HG-AAS), Inductively Coupled Plasma Mass Spectrometer (ICP-MS) and Neutron Activation Analysis (NAA).Chapter (3): This chapter includes the methods of sampling, sample preparation, and sample digesition. The measures of quality assurance are disscused in this chapter. It describes in details the closed microwave digestion technique and the analytical methods used in this study which are present in Central Laboratory for Elemental and Isotopic Analysis (CLEIA) and the Egypt Second Research Reactor (ETRR-2). The described techniques are Atomic Absorption Spectrometer (AAS 6 vario, Analytical Jena GmbH, Germany), JMS-PLASMAX2 Mass Spectrometer (ICP-MS) and the Egypt Second Research Reactor (NAA).

  17. Studying accelerometers with capacitive sensing elements

    Directory of Open Access Journals (Sweden)

    Ágoston Katalin

    2011-12-01

    Full Text Available This paper presents types and operating mode of vibration sensors. Differential capacitor sensing elements are often used in integrated accelerometers. It will be investigate the structure and transfer function of the seismic mass type sensing element. The article presents how the piezoelectric sensing element works and compares with capacitor sensing element and how can be modeled with an electronic circuit and Simulink models. The transfer functions of the capacitor sensing element models are studied in Matlab and the results are presented.

  18. Remediation using trace element humate surfactant

    Science.gov (United States)

    Riddle, Catherine Lynn; Taylor, Steven Cheney; Bruhn, Debra Fox

    2016-08-30

    A method of remediation at a remediation site having one or more undesirable conditions in which one or more soil characteristics, preferably soil pH and/or elemental concentrations, are measured at a remediation site. A trace element humate surfactant composition is prepared comprising a humate solution, element solution and at least one surfactant. The prepared trace element humate surfactant composition is then dispensed onto the remediation site whereby the trace element humate surfactant composition will reduce the amount of undesirable compounds by promoting growth of native species activity. By promoting native species activity, remediation occurs quickly and environmental impact is minimal.

  19. Drying of mock spent nuclear fuel elements

    Energy Technology Data Exchange (ETDEWEB)

    Crepeau, J.C.; Reese, S.; McIlroy, H.M. Jr. [Univ. of Idaho, Idaho Falls, ID (United States). Dept. of Mechanical Engineering; Lords, R.E. [Lockheed Martin Idaho Technologies Co., Idaho Falls, ID (United States)

    1998-03-01

    Spent nuclear fuel elements are stored in underwater cooling pools until the elements can be safely handled and prepared for interim dry storage. The fuel was intended for short-term storage in water before it was to be reprocessed. However, the fuel will no longer be reprocessed, and extended storage in water has caused many of the aluminum-clad elements to degrade, exposing the uranium fuel. In addition, sludge, comprised of corroded aluminum and sediment, has accumulated in and around the fuel plates. The water in the sludge must be removed before the spent fuel elements can be placed in dry storage. Experiments have been performed on mock spent fuel elements with simulated corrosion product applied between the plates. A series of vacuum and heating cycles were used to dry the elements, and a mixture of clay and aluminum oxide was used to simulate corrosion products on the elements. The procedures used in the experiments were determined to be adequate to dry the mock spent fuel elements, and the temperature behavior of the simulated corrosion product within the fuel elements could be used to determine when the element was dry. On plates where areas of wet simulant were found, a sharp frying front was observed that separated the wet and dry parts of the simulated corrosion product. The drying front propagated inward towards the center of the mock fuel elements over time.

  20. Pump element for a tube pump

    DEFF Research Database (Denmark)

    2011-01-01

    The invention relates to a tube pump comprising a tube and a pump element inserted in the tube, where the pump element comprises a rod element and a first and a second non-return valve member positioned a distance apart on the rod element. The valve members are oriented in the same direction...... portion acts to alternately close and open the valve members thereby generating a fluid flow through the tube. The invention further relates to a pump element comprising at least two non-return valve members connected by a rod element, and for insertion in an at least partly flexible tube in such tube...... pump as mentioned above, thereby acting to generate a fluid flow through the tube upon repeated deformation of the tube between the two valve members. The pump element may comprise a connecting part for coupling to another tube and may comprise a sealing part establishing a fluid tight connection...

  1. Super-Light Prefabricated Deck Element Integrated in Traditional Concrete Prefabricated Element Construction

    DEFF Research Database (Denmark)

    Christensen, Jacob Ellehauge; Hertz, Kristian Dahl

    of the super-light slab element are element size, which have greatly reduced the total number of elements the pedestrian bridges consist of. The application also demonstrated the ability to control the path that the forces will take in the element. The deck elements are for example fully prepared......Super-light structures in form of deck elements have been used for the first time in a building to construct indoor pedestrian bridges. Examples of connections to external structures and other super-light deck elements are given along with other details. Other examples on the great versatility...

  2. Fuel elements of thermionic converters

    International Nuclear Information System (INIS)

    Hunter, R.L.

    1997-01-01

    Work on thermionic nuclear power systems has been performed in Russia within the framework of the TOPAZ reactor program since the early 1960s. In the TOPAZ in-core thermionic convertor reactor design, the fuel element's cladding is also the thermionic convertor's emitter. Deformation of the emitter can lead to short-circuiting and is the primary cause of premature TRC failure. Such deformation can be the result of fuel swelling, thermocycling, or increased unilateral pressure on the emitter due to the release of gaseous fission products. Much of the work on TRCs has concentrated on preventing or mitigating emitter deformation by improving the following materials and structures: nuclear fuel; emitter materials; electrical insulators; moderator and reflector materials; and gas-exhaust device. In addition, considerable effort has been directed toward the development of experimental techniques that accurately mimic operational conditions and toward the creation of analytical and numerical models that allow operational conditions and behavior to be predicted without the expense and time demands of in-pile tests. New and modified materials and structures for the cores of thermionic NPSs and new fabrication processes for the materials have ensured the possibility of creating thermionic NPSs for a wide range of powers, from tens to several hundreds of kilowatts, with life spans of 5 to 10 years

  3. EXTERNAL ELEMENTS OF INTERCULTURAL MANAGEMENT

    Directory of Open Access Journals (Sweden)

    Ruxandra GEORGESCU

    2017-12-01

    Full Text Available Because nowadays we attach a great importance to our look, this article wants to highlight certain aspects of intercultural management that are external to us, the personal label with which we "come into contact with the whole world” and also this article gives some suggestions that I want to consider for business success. As speakers of a language, we are both "producers" and "consumers" of it. In a sense, this is also the case for the dress code, the "language" of clothing: we dress in a certain way and this send messages to others; We perceive how others are dressed and so we receive messages from them. But there is no difference: we are not the ones who produce the signs. Beyond fashion, myths and motes, clothing, accessories, gesture, face expression, posture and body lines are the first elements that give visual identity to any person. In the business environment, as in the world of fashion, immediate visual identity is the one that generates the first impression.

  4. Superheavy element chemistry at GARIS

    Directory of Open Access Journals (Sweden)

    Haba Hiromitsu

    2016-01-01

    Full Text Available A gas-jet transport system has been installed to the RIKEN GAs-filled Recoil Ion Separator, GARIS to start up SuperHeavy Element (SHE chemistry. This system is a promising approach for exploring new frontiers in SHE chemistry: background radioactivities from unwanted by-products are suppressed, a high gas-jet transport yield is achieved, and new chemical reactions can be investigated. Useful radioisotopes of 261Rfa,b, 262Db, and 265Sga,b for chemical studies were produced in the reactions of 248Cm(18O,5n261Rfa,b, 248Cm(19F,5n262Db, and 248Cm(22Ne,5n265Sga,b, respectively. They were successfully extracted to a chemistry laboratory by the gas-jet method. Production and decay properties of 261Rfa,b, 262Db, and 265Sga,b were investigated in detail with the rotating wheel apparatus for α- and spontaneous fission spectrometry. Present status and perspectives of the SHE chemistry at GARIS are also briefly presented.

  5. FEBio: finite elements for biomechanics.

    Science.gov (United States)

    Maas, Steve A; Ellis, Benjamin J; Ateshian, Gerard A; Weiss, Jeffrey A

    2012-01-01

    In the field of computational biomechanics, investigators have primarily used commercial software that is neither geared toward biological applications nor sufficiently flexible to follow the latest developments in the field. This lack of a tailored software environment has hampered research progress, as well as dissemination of models and results. To address these issues, we developed the FEBio software suite (http://mrl.sci.utah.edu/software/febio), a nonlinear implicit finite element (FE) framework, designed specifically for analysis in computational solid biomechanics. This paper provides an overview of the theoretical basis of FEBio and its main features. FEBio offers modeling scenarios, constitutive models, and boundary conditions, which are relevant to numerous applications in biomechanics. The open-source FEBio software is written in C++, with particular attention to scalar and parallel performance on modern computer architectures. Software verification is a large part of the development and maintenance of FEBio, and to demonstrate the general approach, the description and results of several problems from the FEBio Verification Suite are presented and compared to analytical solutions or results from other established and verified FE codes. An additional simulation is described that illustrates the application of FEBio to a research problem in biomechanics. Together with the pre- and postprocessing software PREVIEW and POSTVIEW, FEBio provides a tailored solution for research and development in computational biomechanics.

  6. Functions over RDF Language Elements

    Science.gov (United States)

    Schandl, Bernhard

    RDF data are usually accessed using one of two methods: either, graphs are rendered in forms perceivable by human users (e.g., in tabular or in graphical form), which are difficult to handle for large data sets. Alternatively, query languages like SPARQL provide means to express information needs in structured form; hence they are targeted towards developers and experts. Inspired by the concept of spreadsheet tools, where users can perform relatively complex calculations by splitting formulas and values across multiple cells, we have investigated mechanisms that allow us to access RDF graphs in a more intuitive and manageable, yet formally grounded manner. In this paper, we make three contributions towards this direction. First, we present RDFunctions, an algebra that consists of mappings between sets of RDF language elements (URIs, blank nodes, and literals) under consideration of the triples contained in a background graph. Second, we define a syntax for expressing RDFunctions, which can be edited, parsed and evaluated. Third, we discuss Tripcel, an implementation of RDFunctions using a spreadsheet metaphor. Using this tool, users can easily edit and execute function expressions and perform analysis tasks on the data stored in an RDF graph.

  7. Division algebras with integral elements

    International Nuclear Information System (INIS)

    Koca, M.; Ozdes, N.

    1988-06-01

    Pairing two elements of a given division algebra furnished with a multiplication rule leads to an algebra of higher dimension restricted by 8. This fact is used to obtain the roots of SO(4) and SP(2) from the roots ±1 of SU(2) and the weights ±1/2 of its spinor representation. The root lattice of SO(8) described by 24 integral quaternions are obtained by pairing two sets of roots of SP(2). The root system of F 4 is constructed in terms of 24 integral and 24 ''half-integral'' quaternions. The root lattice of E 8 expressed as 240 integral octonions are obtained by pairing two sets of roots of F 4 . 24 integral quaternions of SO(8) forming a discrete subgroup of SU(2) is shown to be the automorphism group of the root lattices of SO(8), F 4 and E 8 . The roots of maximal subgroups SO(16), E 7 XSU(2), E 6 XSU(3), SU(9) and SU(5)XSU(5) of E 8 are identified with a simple method. Subsets of the discrete subgroup of SU(2) leaving maximal subgroups of E 8 are obtained. Constructions of E 8 root lattice with integral octonions in 7 distinct ways are made. Magic square of integral lattices of Goddard, Nahm, Olive, Ruegg and Schwimmer are derived. Possible physical applications are suggested. (author). 16 refs, 6 figs, 5 tabs

  8. Finite element coiled cochlea model

    Science.gov (United States)

    Isailovic, Velibor; Nikolic, Milica; Milosevic, Zarko; Saveljic, Igor; Nikolic, Dalibor; Radovic, Milos; Filipović, Nenad

    2015-12-01

    Cochlea is important part of the hearing system, and thanks to special structure converts external sound waves into neural impulses which go to the brain. Shape of the cochlea is like snail, so geometry of the cochlea model is complex. The simplified cochlea coiled model was developed using finite element method inside SIFEM FP7 project. Software application is created on the way that user can prescribe set of the parameters for spiral cochlea, as well as material properties and boundary conditions to the model. Several mathematical models were tested. The acoustic wave equation for describing fluid in the cochlea chambers - scala vestibuli and scala timpani, and Newtonian dynamics for describing vibrations of the basilar membrane are used. The mechanical behavior of the coiled cochlea was analyzed and the third chamber, scala media, was not modeled because it does not have a significant impact on the mechanical vibrations of the basilar membrane. The obtained results are in good agreement with experimental measurements. Future work is needed for more realistic geometry model. Coiled model of the cochlea was created and results are compared with initial simplified coiled model of the cochlea.

  9. Spacer for supporting fuel element boxes

    International Nuclear Information System (INIS)

    Wild, E.

    1979-01-01

    A spacer plate unit arranged externally on each side and at a predetermined level of a polygonal fuel element box for mutually supporting, with respect to one another, a plurality of the fuel element boxes forming a fuel element bundle, is formed of a first and a second spacer plate part each having the same length and the same width and being constituted of unlike first and second materials, respectively. The first and second spacer plate parts of the several spacer plate units situated at the predetermined level are arranged in an alternating continuous series when viewed in the peripheral direction of the fuel element box, so that any two spacer plate units belonging to face-to-face oriented sides of two adjoining fuel element boxes in the fuel element bundle define interfaces of unlike materials

  10. Equilibrium-Based Nonhomogeneous Anisotropic Beam Element

    DEFF Research Database (Denmark)

    Krenk, Steen; Couturier, Philippe

    2017-01-01

    The stiffness matrix and the nodal forces associated with distributed loads are obtained for a nonhomogeneous anisotropic elastic beam element by the use of complementary energy. The element flexibility matrix is obtained by integrating the complementary-energy density corresponding to six beam...... equilibrium states, and then inverted and expanded to provide the element-stiffness matrix. Distributed element loads are represented via corresponding internal-force distributions in local equilibrium with the loads. The element formulation does not depend on assumed shape functions and can, in principle......, include any variation of cross-sectional properties and load variation, provided that these are integrated with sufficient accuracy in the process. The ability to represent variable cross-sectional properties, coupling from anisotropic materials, and distributed element loads is illustrated by numerical...

  11. Automated Fuel Element Closure Welding System

    International Nuclear Information System (INIS)

    Wahlquist, D.R.

    1993-01-01

    The Automated Fuel Element Closure Welding System is a robotic device that will load and weld top end plugs onto nuclear fuel elements in a highly radioactive and inert gas environment. The system was developed at Argonne National Laboratory-West as part of the Fuel Cycle Demonstration. The welding system performs four main functions, it (1) injects a small amount of a xenon/krypton gas mixture into specific fuel elements, and (2) loads tiny end plugs into the tops of fuel element jackets, and (3) welds the end plugs to the element jackets, and (4) performs a dimensional inspection of the pre- and post-welded fuel elements. The system components are modular to facilitate remote replacement of failed parts. The entire system can be operated remotely in manual, semi-automatic, or fully automatic modes using a computer control system. The welding system is currently undergoing software testing and functional checkout

  12. A set of robotic building elements

    DEFF Research Database (Denmark)

    2017-01-01

    A set of building elements (900), comprising one or more building elements (101;701;901..907) with a housing (119) which is selected from a group of straight, bend, L-shaped, and T-shaped bodies with one or more end-portions (121); wherein the building elements are configured with at least one...... building element. A drive unit (114) is coupled to turn the first one of connectors (103) in response to a control signal and an energy storage unit (117) is coupled to supply operating power the drive unit. Preferably, the body members (119) are tubular or tubular with one or more branches....... or greater than a width (Wf) of the female engagement member. At least a first building element among the building elements (101;701) comprises at least a first one of the connectors (103); wherein the at least first one of the connectors (103) is rotatable mounted in a bearing (108) fixed to the first...

  13. Critically Important Object Security System Element Model

    Directory of Open Access Journals (Sweden)

    I. V. Khomyackov

    2012-03-01

    Full Text Available A stochastic model of critically important object security system element has been developed. The model includes mathematical description of the security system element properties and external influences. The state evolution of the security system element is described by the semi-Markov process with finite states number, the semi-Markov matrix and the initial semi-Markov process states probabilities distribution. External influences are set with the intensity of the Poisson thread.

  14. CONTROVERSY REGARDING ELEMENTS IN THE FINANCIAL STATEMENTS

    OpenAIRE

    Marilena-Roxana Zuca

    2013-01-01

    The definitions of the elements identify their main traits, but their purpose, the reason for their presence in the financial statements is ensured by meeting the recognition criteria.The current concerns of accounting regulatory organisms in setting and developing the elements and the common conceptual Framework have materialized by setting recognition criteria, that help to achieve a more accurate position of elements in the financial statements, thus creating credibility and relevance of t...

  15. The elements of life and medicines.

    Science.gov (United States)

    Chellan, Prinessa; Sadler, Peter J

    2015-03-13

    Which elements are essential for human life? Here we make an element-by-element journey through the periodic table and attempt to assess whether elements are essential or not, and if they are, whether there is a relevant code for them in the human genome. There are many difficulties such as the human biochemistry of several so-called essential elements is not well understood, and it is not clear how we should classify elements that are involved in the destruction of invading microorganisms, or elements which are essential for microorganisms with which we live in symbiosis. In general, genes do not code for the elements themselves, but for specific chemical species, i.e. for the element, its oxidation state, type and number of coordinated ligands, and the coordination geometry. Today, the biological periodic table is in a position somewhat similar to Mendeleev's chemical periodic table of 1869: there are gaps and we need to do more research to fill them. The periodic table also offers potential for novel therapeutic and diagnostic agents, based on not only essential elements, but also non-essential elements, and on radionuclides. Although the potential for inorganic chemistry in medicine was realized more than 2000 years ago, this area of research is still in its infancy. Future advances in the design of inorganic drugs require more knowledge of their mechanism of action, including target sites and metabolism. Temporal speciation of elements in their biological environments at the atomic level is a major challenge, for which new methods are urgently needed.

  16. Noncoding Elements: Evolution and Epigenetic Regulation

    KAUST Repository

    Seridi, Loqmane

    2016-03-09

    When the human genome project was completed, it revealed a surprising result. 98% of the genome did not code for protein of which more than 50% are repeats— later known as ”Junk DNA”. However, comparative genomics unveiled that many noncoding elements are evolutionarily constrained; thus luckily to have a role in genome stability and regulation. Though, their exact functions remained largely unknown. Several large international consortia such as the Functional Annotation of Mammalian Genomes (FANTOM) and the Encyclopedia of DNA Elements (ENCODE) were set to understand the structure and the regulation of the genome. Specifically, these endeavors aim to measure and reveal the transcribed components and functional elements of the genome. One of the most the striking findings of these efforts is that most of the genome is transcribed, including non-conserved noncoding elements and repeat elements. Specifically, we investigated the evolution and epigenetic properties of noncoding elements. 1. We compared genomes of evolutionarily distant species and showed the ubiquity of constrained noncoding elements in metazoa. 2. By integrating multi-omic data (such as transcriptome, nucleosome profiling, histone modifications), I conducted a comprehensive analysis of epigenetic properties (chromatin states) of conserved noncoding elements in insects. We showed that those elements have distinct and protective sequence features, undergo dynamic epigenetic regulation, and appear to be associated with the structural components of the chromatin, replication origins, and nuclear matrix. 3. I focused on the relationship between enhancers and repetitive elements. Using Cap Analysis of Gene Expression (CAGE) and RNASeq, I compiled a full catalog of active enhancers (a class of noncoding elements) during myogenesis of human primary cells of healthy donors and donors affected by Duchenne muscular dystrophy (DMD). Comparing the two time-courses, a significant change in the epigenetic

  17. Domain decomposition methods for mortar finite elements

    Energy Technology Data Exchange (ETDEWEB)

    Widlund, O.

    1996-12-31

    In the last few years, domain decomposition methods, previously developed and tested for standard finite element methods and elliptic problems, have been extended and modified to work for mortar and other nonconforming finite element methods. A survey will be given of work carried out jointly with Yves Achdou, Mario Casarin, Maksymilian Dryja and Yvon Maday. Results on the p- and h-p-version finite elements will also be discussed.

  18. Superheavy Elements Challenge Experimental and Theoretical Chemistry

    CERN Document Server

    Zvára, I

    2003-01-01

    When reflecting on the story of superheavy elements, the an experimenter, acknowledges the role, which the predictions of nuclear and chemical theories have played in ongoing studies. Today, the problems of major interest for experimental chemistry are the studies of elements 112 and 114 including their chemical identification. Advanced quantum chemistry calculations of atoms and molecules would be of much help. First experiments with element 112 evidence that the metal is much more volatile and inert than mercury.

  19. Rack for storing spent nuclear fuel elements

    Science.gov (United States)

    Rubinstein, Herbert J.; Clark, Philip M.; Gilcrest, James D.

    1978-06-20

    A rack for storing spent nuclear fuel elements in which a plurality of aligned rows of upright enclosures of generally square cross-sectional areas contain vertically disposed fuel elements. The enclosures are fixed at the lower ends thereof to a base. Pockets are formed between confronting walls of adjacent enclosures for receiving high absorption neutron absorbers, such as Boral, cadmium, borated stainless steel and the like for the closer spacing of spent fuel elements.

  20. Interaction Between Flow Elements in Large Enclosures

    DEFF Research Database (Denmark)

    Heiselberg, Per

    In this paper experiments in a scale model are used as a first attempt to investigate how different flow elements such as supply air jets, thermal plumes and free convection flows interact with each other in a large enclosure, if the path of each individual flow element changes and if this influe......In this paper experiments in a scale model are used as a first attempt to investigate how different flow elements such as supply air jets, thermal plumes and free convection flows interact with each other in a large enclosure, if the path of each individual flow element changes...

  1. Anisotropic damping of Timoshenko beam elements

    DEFF Research Database (Denmark)

    Hansen, M.H.

    2001-01-01

    This report contains a description of a structural damping model for Timoshenko beam elements used in the aeroelastic code HawC developed at Risø for modeling wind turbines. The model has been developed to enable modeling of turbine blades which oftenhave different damping characteristics...... for ¤flapwise¤, ¤edgewise¤ and ¤torsional¤ vibrations. The structural damping forces acting on the beam element are modeled by viscous damping described by an element damping matrix. The composition of this matrix is basedon the element mass and stiffness matrices. It is shown how the coefficients for the mass...

  2. Stability analysis of artificial synthetic overweight elements

    International Nuclear Information System (INIS)

    Zhou Jian

    1990-01-01

    Stability of artificial synthetic overweight elements has been analysed theoretically using a diagram of nuclear stability. It is indicated that overweight nucleus can be synthesized only when a certain amount of neutrons participate simultaneously in the synthesis. The maximum number of protons in overweight elements is 1002. The proton number of 'extreme overweight' elements of which the neutron star is possibly composed is in the range from 326 to 1002. It is expected that the mass number of the stable overweight elements with proton number 114 is in the range from 299 to 315

  3. Time elements. [for transformations in satellite equations

    Science.gov (United States)

    Nacozy, P. E.

    1974-01-01

    Time elements are introduced for use with Sundman time transformations of the type dt = r(alpha)ds for satellite equations of motion. Two time elements are given, one providing maximum accuracy for alpha = 1, the other for alpha = 2. Time elements and time transformations reduce local truncation error and Liapunov (in track) instability, and provide analytical step size control. Numerical results show accuracy improvements of more than one order of magnitude when time elements are employed with time transformations in the numerical integration of the satellite equations, compared with using time transformations alone.

  4. Hydriding failure in water reactor fuel elements

    International Nuclear Information System (INIS)

    Sah, D.N.; Ramadasan, E.; Unnikrishnan, K.

    1980-01-01

    Hydriding of the zircaloy cladding has been one of the important causes of failure in water reactor fuel elements. This report reviews the causes, the mechanisms and the methods for prevention of hydriding failure in zircaloy clad water reactor fuel elements. The different types of hydriding of zircaloy cladding have been classified. Various factors influencing zircaloy hydriding from internal and external sources in an operating fuel element have been brought out. The findings of post-irradiation examination of fuel elements from Indian reactors, with respect to clad hydriding and features of hydriding failure are included. (author)

  5. Quadrature representation of finite element variational forms

    DEFF Research Database (Denmark)

    Ølgaard, Kristian Breum; Wells, Garth N.

    2012-01-01

    This chapter addresses the conventional run-time quadrature approach for the numerical integration of local element tensors associated with finite element variational forms, and in particular automated optimizations that can be performed to reduce the number of floating point operations. An alter......This chapter addresses the conventional run-time quadrature approach for the numerical integration of local element tensors associated with finite element variational forms, and in particular automated optimizations that can be performed to reduce the number of floating point operations...

  6. A first course in finite elements

    CERN Document Server

    Fish, Jacob

    2007-01-01

    Developed from the authors, combined total of 50 years undergraduate and graduate teaching experience, this book presents the finite element method formulated as a general-purpose numerical procedure for solving engineering problems governed by partial differential equations.  Focusing on the formulation and application of the finite element method through the integration of finite element theory, code development, and software application, the book is both introductory and self-contained, as well as being a hands-on experience for any student. This authoritative text on Finite Elements:Adopts

  7. Books and monographs on finite element technology

    Science.gov (United States)

    Noor, A. K.

    1985-01-01

    The present paper proviees a listing of all of the English books and some of the foreign books on finite element technology, taking into account also a list of the conference proceedings devoted solely to finite elements. The references are divided into categories. Attention is given to fundamentals, mathematical foundations, structural and solid mechanics applications, fluid mechanics applications, other applied science and engineering applications, computer implementation and software systems, computational and modeling aspects, special topics, boundary element methods, proceedings of symmposia and conferences on finite element technology, bibliographies, handbooks, and historical accounts.

  8. Mexico and the global problematic: power relations, knowledge and communication in neoliberal Mexico

    NARCIS (Netherlands)

    Gómez-Llata Cázares, E.G.

    2012-01-01

    Enrique Gómez-Llata onderzocht welke sociale structuren tussen 1980 en 2010 hebben bijgedragen aan de toename van armoede en agressie in de Mexicaanse samenleving. Hij richtte zich met name op de communicatiepraktijken die tijdens deze periode in Mexico gebruikelijk waren. Gómez-Llata concludeert

  9. DISCRETE ELEMENT MODELLING OF THE COMPRESSIVE ...

    African Journals Online (AJOL)

    Discrete element modelling is a numerical method capable of tracking the movement of individual objects within a bulk system and compute the resulting force and deformation as well as other parameters. The Discrete Element Method (DEM) has been used in this study to investigate the deformation of individual particles ...

  10. Soils element history, sampling, analyses, and recommendations

    International Nuclear Information System (INIS)

    Fowler, E.B.; Essington, E.H.

    1976-01-01

    A five year history of the Soils Element of the Nevada Applied Ecology Group (NAEG) is presented. Major projects are reviewed. Emphasis is placed on mound studies and profile studies for the period March 1, 1975, through February 1, 1976. A series of recommendations is made relative to extensions of past efforts of the Soils Element of the NAEG

  11. Phytochemical screening, proximate and elemental analysis of ...

    African Journals Online (AJOL)

    Citrus sinensis was screened for its phytochemical composition and was evaluated for the proximate and elemental analysis. The phytochemical analysis indicated the presence of reducing sugar, saponins, cardiac glycosides, tannins and flavonoids. The elemental analysis indicated the presence of the following mineral ...

  12. Finite-Element Software for Conceptual Design

    DEFF Research Database (Denmark)

    Lindemann, J.; Sandberg, G.; Damkilde, Lars

    2010-01-01

    and research. Forcepad is an effort to provide a conceptual design and teaching tool in a finite-element software package. Forcepad is a two-dimensional finite-element application based on the same conceptual model as image editing applications such as Adobe Photoshop or Microsoft Paint. Instead of using...

  13. Element sharing in interleaved antenna arrays

    CSIR Research Space (South Africa)

    Du Plessis, WP

    2012-03-01

    Full Text Available The effect of allowing shared elements in interleaved thinned arrays is investigated. The sidelobe level (SLL) as a function of the number of shared elements mirrors the SLL of thinned arrays as a function of filling factor because the number...

  14. 14 CFR 271.6 - Profit element.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Profit element. 271.6 Section 271.6 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION (AVIATION PROCEEDINGS) ECONOMIC... element. The reasonable return for a carrier for providing essential air service at an eligible place...

  15. 49 CFR 236.744 - Element, roadway.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Element, roadway. 236.744 Section 236.744 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Element, roadway. That portion of the roadway apparatus of automatic train stop, train control, or cab...

  16. Det pædagogiske element

    DEFF Research Database (Denmark)

    Thomsen, Viggo Ernst; Skipper-Jørgensen, Anette Maren

    2010-01-01

    Om det pædagogiske element i læreruddannelsen på matematik aldersspecialisering mod begynder- og mellemtrin......Om det pædagogiske element i læreruddannelsen på matematik aldersspecialisering mod begynder- og mellemtrin...

  17. Non-linear finite element modeling

    DEFF Research Database (Denmark)

    Mikkelsen, Lars Pilgaard

    The note is written for courses in "Non-linear finite element method". The note has been used by the author teaching non-linear finite element modeling at Civil Engineering at Aalborg University, Computational Mechanics at Aalborg University Esbjerg, Structural Engineering at the University...

  18. Optimization of the response of magnetoresistive elements

    NARCIS (Netherlands)

    Eijkel, C.J.M.; Fluitman, J.H.J.

    A way to optimize the output signal of a general thin-film magnetoresistive element with a homogeneous magnetization field as used in applications with a saturating external magnetic field is presented. The element is assumed to be operated by four-point measurement. In order to be able to compare

  19. Contact fatigue in rolling-element bearings

    CSIR Research Space (South Africa)

    Fernandes, PJL

    1997-06-01

    Full Text Available Surface contact fatigue is a common cause of failure in rolling-element bearings. The extent of damage observed depends on the contact loads, the curvature of the rolling elements, and the relative motion between the contacting surfaces...

  20. Nonlinear finite element modeling of corrugated board

    Science.gov (United States)

    A. C. Gilchrist; J. C. Suhling; T. J. Urbanik

    1999-01-01

    In this research, an investigation on the mechanical behavior of corrugated board has been performed using finite element analysis. Numerical finite element models for corrugated board geometries have been created and executed. Both geometric (large deformation) and material nonlinearities were included in the models. The analyses were performed using the commercial...

  1. Just-in-time elements and benefits

    CERN Document Server

    García-Alcaraz, Jorge Luis

    2016-01-01

    This book reports the elements required for implementing Just in Time (JIT) technique in companies. The main reasons for low implementation processes and the main benefits from the successful implementation of them are highlighted in this book. Structural equation models are presented to help identify the essential elements in JIT.

  2. Heavy element nuclear chemistry research in JAERI

    International Nuclear Information System (INIS)

    Nagame, Yuichiro; Asai, Masato; Haba, Hiromitsu; Tsukada, Kazuaki; Sakama, Minoru; Goto, Shin-ichi; Nishinaka, Ichiro; Ichikawa, Shin-ichi

    2001-01-01

    Heavy element nuclear chemistry research in JAERI is reviewed. Recent experimental results on decay studies of neutron deficient actinide nuclei using the gas-jet coupled JAERI-ISOL are presented. Successful production of the transactinide nuclei, 261 Rf and 262 Db, and the present status of studies of chemical properties on the transactinide elements are introduced. (author)

  3. On elastic structural elements for nuclear reactors

    International Nuclear Information System (INIS)

    Povolo, F.

    1978-03-01

    The in-pile stress-relaxation behaviour of materials usually employed for the elastic structural elements, in nuclear reactors, is critically reviewed and the results are compared with those obtained in commercial zirconium alloys irradiated under similar conditions. Finally, it is shown that, under certain conditions, some zirconium alloys may be used as an alternative material for these structural elements. (orig.) [de

  4. Chemistry gains a new element: Z=106

    International Nuclear Information System (INIS)

    Gaeggeler, H.W.; Eichler, B.; Tuerler, A.

    1997-01-01

    Even though 112 chemical elements are presently known, for elements with atomic numbers above 105 only nuclear decay properties have been investigated so far. Such data allow to proof the existence of a given nuclide, but they do not yield any information with respect to the position of a chemical element in the Periodic Table. We have performed ever first chemical investigations of element 106. According to the Periodic Table element 106 should be a member of group 6, having similar chemical properties as W, Mo and Cr. Two different techniques were applied to separate and identify element 106: a liquid chromatography system (ARCA = Automated Rapid Chemistry Apparatus) and a continuous isothermal chromatography device (OLGA = On-Line Gaschemistry Apparatus). With ARCA about 5'000 separations on small cation exchange columns (Aminex A6) with a 0.1 M HNO 3 /5.10 -4 M Hf solution were performed and with OLGA the gas adsorption behaviour of oxychlorides on quartz columns using Cl 2 /SOCl 2 /O 2 as reactive gas were studied. On the basis of only ten detected atoms, it was possible to proof that element 106 forms complexes which are eluted at positions similar to those of Mo and W. In addition, in the gas phase element 106 forms oxychlorides of lower volatility compared to those of Mo and W. (author) 1 ref

  5. Nuclear reactor fuel element sub-assemblies

    International Nuclear Information System (INIS)

    Ashton, M.W.

    1975-01-01

    Reference is made to fuel element sub-assemblies for use in a Na cooled fast reactor. Such sub-assemblies may comprises a hexagonal bundle of slender fuel elements enclosed in a tubular sleeve, often referred to as a 'wrapper'. The fuel elements are spaced apart by helical wire wraps forming fins and which also space the wrapper from the bundle. The wire wraps make contact with the sheaths of adjacent elements and with the wrapper, so that each fuel element is well supported against thermal bowing, rattling and vibration, whilst allowing adequate coolant flow passages through the bundle. It has been found, however, that the outer fuel elements of the bundle are subject to over-cooling in this arrangement; this problem can, however, be largely overcome by reducing the flow passage between the bundle and the wrapper. In the arrangement described a wire filler is employed, extending along each outer coolant flow passage, and constructed in wave form. Fillers of such form have been found to reduce over-cooling considerably and they avoid the need for varied height wraps on the fuel elements. The fuel elements also have improved lateral support by contact with the fillers. (U.K.)

  6. Protein export elements from Lactococcus lactis

    NARCIS (Netherlands)

    Perez-Martinez, Gaspar; Kok, Jan; Venema, Gerhardus; Dijl, Jan Maarten van; Smith, Hilda; Bron, Sierd

    Broad-host-range plasmids carrying α-amylase or β-lactamase reporter genes lacking a signal sequence were used to select export elements from Lactococcus lactis chromosomal DNA that could function as signal sequences. Fragments containing such elements were identified by their ability to direct the

  7. Elements of Inclusion: Findings from the Field

    Science.gov (United States)

    McMaster, Christopher

    2014-01-01

    The Ministry of Education has set the target of 100% of New Zealand schools to be "mostly" inclusive by 2014. But what are the essential elements of inclusion? This paper explores essential core elements that allow inclusion to flourish. Based on an extensive time in the field as part of a year-long doctoral research project, these…

  8. Photosynthetic system as a biological functional element

    International Nuclear Information System (INIS)

    Zakhidov, E.A.; Zakhidova, M.A.; Kasymdzhanov, M.A.; Kurbanov, S.S.; Nematov, Sh.K.; Khabibullaev, P.K.

    2005-01-01

    Photosynthetic apparatus of high plants and photosynthetic bacteria is essentially autonomic system in terms of genetics and structural -functional properties located in specific medium, a bio-membrane. Processes of light absorption and exciton migration in light harvesting antenna, separation and further transfer of charges in reaction centers have specific features, which may be used for application of these objects as key elements in construction of future biological functional elements. Progress in study and genetic modification of photosynthetic membranes achieved during the last decade opens great prospects in development biological functional elements and systems. The main characteristics of photosynthetic system for these purposes are: (i) energy conversion processes in the first light phase of the photosynthesis have very short periods, up to picoseconds, which indicates possibility of creation of ultrafast functional elements on their basis; (ii) characteristics sizes of photosynthetic units, 10-100 nm, and possibility to arrange regularly disposed elements in relevant membranes could be prospective point for creation of nano structures and on their basis relevant biologic functional elements; (iii) elements based on modified photosynthetic apparatus and bio-membranes might be efficiently created by methods of gene engineering and manipulation, that open huge opportunities for development of read biological functional systems. In the paper structural-functional properties and characteristics of high plants and purple photosynthetic bacteria, which may be useful for creation of future biological functional elements are considered. (author)

  9. The New Element Curium (Atomic Number 96)

    Science.gov (United States)

    Seaborg, G. T.; James, R. A.; Ghiorso, A.

    1948-01-01

    Two isotopes of the element with atomic number 96 have been produced by the helium-ion bombardment of plutonium. The name curium, symbol Cm, is proposed for element 96. The chemical experiments indicate that the most stable oxidation state of curium is the III state.

  10. Chemical identification and properties of element 112

    Czech Academy of Sciences Publication Activity Database

    Yakushev, AB.; Zvára, Ivo; Oganessian, YT.; Belozerov, AV.; Dmitriev, S. N.; Eichler, B.; Hubener, S.; Sokol, EA.; Turler, A.; Yeremin, AV.; Buklanov, GV.; Chelnokov, ML.; Chepigin, VI.; Gorshkov, VA.; Gulyaev, AV.; Lebedev, VY.; Malyshev, ON.; Popeko, AG.; Soverna, S.; Szeglowski, Z.; Timokhin, SN.; Tretyakova, SP.; Vasko, VM.; Itkis, MG.

    2003-01-01

    Roč. 91, č. 8 (2003), s. 433-439 ISSN 0033-8230 Institutional research plan: CEZ:AV0Z1048901 Keywords : element 112 * superheavy elements * transactinoids Subject RIV: CH - Nuclear ; Quantum Chemistry Impact factor: 0.940, year: 2003

  11. 42 CFR 51c.504 - Project elements.

    Science.gov (United States)

    2010-10-01

    ... local law, contract for construction (including the purchase and installation of built-in equipment) on... 42 Public Health 1 2010-10-01 2010-10-01 false Project elements. 51c.504 Section 51c.504 Public... SERVICES Acquisition and Modernization of Existing Buildings § 51c.504 Project elements. (a) General...

  12. Rovibrational matrix elements of the multipole moments

    Indian Academy of Sciences (India)

    Rovibrational matrix elements of the multipole moments ℓ up to rank 10 and of the linear polarizability of the H2 molecule in the condensed phase have been computed taking into account the effect of the intermolecular potential. Comparison with gas phase matrix elements shows that the effect of solid state interactions is ...

  13. Elemental composition of human and animal milk

    International Nuclear Information System (INIS)

    Iyengar, G.V.

    1982-09-01

    A review is presented of the elemental composition of human and animal milk with special reference to trace elements determined through nuclear techniques, particularly neutron activation analysis (NAA). In the joint IAEA/WHO research project, 16 of the 24 elements under investigation have been analysed by NAA with the aid of advanced research nuclear reactors. Literature data are discussed and tabulated in 50 separate tables (one for each element) mainly for the period after 1950. Each table uses a standard format comprising 10 columns indicating (1) source of milk (e.g. human or animal), (2) status of the milk (colostrum, transitional or mature), (3) country of origin, (4) year of data publication, (5) mean concentration, (6) range of single values or standard deviation of the mean, (7) number of samples analysed, (8) analytical technique employed, (9) literature source of the data, and (10) relevant remarks, if any. The most abundant data refer to the minor elements Ca, Cl, K, Mg, N, Na, P and S and to the trace elements Cu, Fe and Zn. Fewer data are available for Cd, Hg, I, Mn, Pb and Se. For the remaining elements, including such biologically important trace elements as As, Co, Cr, F, Mo, Ni, Si and Sn, very few reliable data so far appear to exist

  14. Chilean fuel elements fabrication progress report

    International Nuclear Information System (INIS)

    Baeza, J.; Contreras, H.; Chavez, J.; Klein, J.; Mansilla, R.; Marin, J.; Medina, R.

    1993-01-01

    Due to HEU-LEU core conversion necessity for the Chilean MTR reactors, the Fuel Elements Plant is being implemented to LEU nuclear fuel elements fabrication. A glove box line for powder-compact processing designed at CCHEN, which supposed to operate under an automatic control system, is at present under initial tests. Results of first natural uranium fuel plates manufacturing runs are shown

  15. The Superheavy Elements and Anti-Gravity

    International Nuclear Information System (INIS)

    Anastasovski, Petar K.

    2004-01-01

    The essence of any propulsion concept is to overcome gravity. Anti-gravity is a natural means to achieve this. Thus, the technology to pursue anti-gravity, by using superheavy elements, may provide a new propulsion paradigm. The theory of superluminal relativity provides a hypothesis for existence of elements with atomic number up to Z = 145, some of which may possess anti-gravity properties. Analysis results show that curved space-time exists demonstrating both gravitic and anti-gravitic properties not only around nuclei but inside the nuclei as well. Two groups of elements (Z < 64 and 63 < Z <145) exist that demonstrate these capabilities. The nuclei of the first group of elements have the masses with only the property of gravity. The nuclei of the elements of the second group have the masses with both properties: gravity and anti-gravity in two different ranges of curved space-time around the nuclei.. The hypothetical element with Z = 145 is the unique among all elements whose nucleus has only anti-gravity property. It is proposed that this element be named Hawking, in honour of Stephen W. Hawking

  16. Trace element metabolism in man and animals

    International Nuclear Information System (INIS)

    Kirchgessner, M.

    1977-01-01

    Uptake, distribution, storage, excretion of different trace elements and resulting disturbances are investigated in blood and organs in animal experiments and in human diagnostics with the aid of radioisotopes. Apart from this, untritional disturbances are mentioned. Finally, future aspects of physiological trace element examinations are listed. (AJ) 891 AJ [de

  17. Trace elements characterization of the hydrothermally deposited ...

    African Journals Online (AJOL)

    With the exception of higher barium contents in pelites, trace element contents in the psammitic and pelitic gneisses show some similarities while in the hydrothermally altered rocks where gemstones (tanzanite and green grossular) are localized reveal that the following trace elements: Ba, Cu, Mo, Ni, Rb, Sr, U, V and Zn ...

  18. Mobile genetic elements in protozoan parasites

    Indian Academy of Sciences (India)

    Mobile genetic elements, by virtue of their ability to move to new chromosomal locations, are considered important in shaping the evolutionary course of the genome. They are widespread in the biological kingdom. Among the protozoan parasites several types of transposable elements are encountered. The largest variety ...

  19. Dissolution of aluminium-cladded fuel elements

    International Nuclear Information System (INIS)

    Bernhard, G.; Boessert, W.; Hladik, O.; Schwarzbach, R.

    1984-01-01

    In the molybdenum production plant at Rossendorf (AMOR) short-term irradiated aluminium-cladded fuel elements from the Rossendorf research reactor RFR are dissolved for the purpose of molybdenum 99 production. The dissolution behaviour of these fuel elements and the appropriate dissolver are described. (author)

  20. Conceptual problems with remote element synthesis

    Indian Academy of Sciences (India)

    The notion of remote element synthesis has recently been modified to explain the presence of nucleogenetic isotopic anomalies and decay products of short-lived nuclides by injection of a small amount of exotic nucleogenetic material. Even with this modification, remote element synthesis seems inconsistent with the ...

  1. Least-squares finite element methods

    CERN Document Server

    Bochev, Pavel

    2009-01-01

    Since their emergence, finite element methods have taken a place as one of the most versatile and powerful methodologies for the approximate numerical solution of Partial Differential Equations. This book presents the theory and practice of least-square finite element methods, their strengths and weaknesses, successes, and open problems

  2. DISSOLUTION OF ZIRCONIUM-CONTAINING FUEL ELEMENTS

    Science.gov (United States)

    Horn, F.L.

    1961-12-12

    Uranium is recovered from spent uranium fuel elements containing or clad with zirconium. These fuel elements are placed in an anhydrous solution of hydrogen fluoride and nitrogen dioxide. Within this system uranium forms a soluble complex and zirconium forms an insoluble complex. The uranium can then be separated, treated, and removed from solution as uranium hexafluoride. (AEC)

  3. Verification of Orthogrid Finite Element Modeling Techniques

    Science.gov (United States)

    Steeve, B. E.

    1996-01-01

    The stress analysis of orthogrid structures, specifically with I-beam sections, is regularly performed using finite elements. Various modeling techniques are often used to simplify the modeling process but still adequately capture the actual hardware behavior. The accuracy of such 'Oshort cutso' is sometimes in question. This report compares three modeling techniques to actual test results from a loaded orthogrid panel. The finite element models include a beam, shell, and mixed beam and shell element model. Results show that the shell element model performs the best, but that the simpler beam and beam and shell element models provide reasonable to conservative results for a stress analysis. When deflection and stiffness is critical, it is important to capture the effect of the orthogrid nodes in the model.

  4. Element 74, the Wolfram Versus Tungsten Controversy

    Energy Technology Data Exchange (ETDEWEB)

    Holden,N.E.

    2008-08-11

    Two and a quarter centuries ago, a heavy mineral ore was found which was thought to contain a new chemical element called heavy stone (or tungsten in Swedish). A few years later, the metal was separated from its oxide and the new element (Z=74) was called wolfram. Over the years since that time, both the names wolfram and tungsten were attached to this element in various countries. Sixty years ago, IUPAC chose wolfram as the official name for the element. A few years later, under pressure from the press in the USA, the alternative name tungsten was also allowed by IUPAC. Now the original, official name 'wolfram' has been deleted by IUPAC as one of the two alternate names for the element. The history of this controversy is described here.

  5. Finite Element Modeling of Cracks and Joints

    Directory of Open Access Journals (Sweden)

    Jozef Čížik

    2006-12-01

    Full Text Available The application of finite element method to the analysis of discontinuous structural systems has received a considerable interest in recent years. Examples of problems in which discontinuities play a prominent role in the physical behaviour of a system are numerous and include various types of contact problems and layered or jointed systems. This paper gives a state-of-the-art report on the different methods developed to date for the finite element modelling of cracks and joints in discontinuous systems. Particular attention, however, has been given to the use of joint/interface elements, since their application is considered to be most appropriate for modelling of all kinds of discontinuities that may present in a structural system. A chronology of development of the main types of joint elements, including their pertinent characteristics, is also given. Advantages and disadvantages of the individual methods and types of joint elements presented are briefly discussed, together with various applications of interest.

  6. Automated rapid chemistry in heavy element research

    International Nuclear Information System (INIS)

    Schaedel, M.

    1994-01-01

    With the increasingly short half-lives of the heavy element isotopes in the transition region from the heaviest actinides to the transactinide elements the demand for automated rapid chemistry techniques is also increasing. Separation times of significantly less than one minute, high chemical yields, high repetition rates, and an adequate detection system are prerequisites for many successful experiments in this field. The development of techniques for separations in the gas phase and in the aqueous phase for applications of chemical or nuclear studies of the heaviest elements are briefly outlined. Typical examples of results obtained with automated techniques are presented for studies up to element 105, especially those obtained with the Automated Rapid Chemistry Apparatus, ARCA. The prospects to investigate the properties of even heavier elements with chemical techniques are discussed

  7. Transuranic element behavior in soils and plants

    International Nuclear Information System (INIS)

    Wildung, R.E.

    1982-01-01

    The principal objective of this study is to define soil, plant, and foliar interaction processes that influence the availability of transuranic elements to agricultural plants and animals as a basis for improved modeling and dose-assessment. Major areas of emphasis are: (1) soil and soil-microbial processes that influence the concentration and form of transuranic elements in soil solutions and availability to the plant root with time; (2) deposition and plant interception of airborne submicronic particles containing transuranic elements and their susceptibility to leaching; (3) plant processes that influence transport across plant root membrane and foliar surfaces, as well as the form and sites of deposition of transuranic elements in mature plants; and (4) the integrated effect of soil and plant processes on transuranic element availability to, and form in, animals that consume plants

  8. On the reliability of finite element solutions

    International Nuclear Information System (INIS)

    Prasad, K.S.R.K.

    1975-01-01

    The extent of reliability of the finite element method for analysis of nuclear reactor structures, and that of reactor vessels in particular and the need for the engineer to guard against the pitfalls that may arise out of both physical and mathematical models have been high-lighted. A systematic way of checking the model to obtain reasonably accurate solutions is presented. Quite often sophisticated elements are suggested for specific design and stress concentration problems. The desirability or otherwise of these elements, their scope and utility vis-a-vis the use of large stack of conventional elements are discussed from the view point of stress analysts. The methods of obtaining a check on the reliability of the finite element solutions either through modelling changes or an extrapolation technique are discussed. (author)

  9. Concentration of stable elements in food products

    Energy Technology Data Exchange (ETDEWEB)

    Montford, M.A.; Shank, K.E.; Hendricks, C.; Oakes, T.W.

    1980-01-01

    Food samples were taken from commercial markets and analyzed for stable element content. The concentrations of most stable elements (Ag, Al, As, Au, Ba, Br, Ca, Ce, Cl, Co, Cr, Cs, Cu, Fe, Hf, I, K, La, Mg, Mn, Mo, Na, Rb, Sb, Sc, Se, Sr, Ta, Th, Ti, V, Zn, Zr) were determined using multiple-element neutron activation analysis, while the concentrations of other elements (Cd, Hg, Ni, Pb) were determined using atomic absorption. The relevance of the concentrations found are noted in relation to other literature values. An earlier study was extended to include the determination of the concentration of stable elements in home-grown products in the vicinity of the Oak Ridge National Laboratory. Comparisons between the commercial and local food-stuff values are discussed.

  10. Rolling Element Bearing Stiffness Matrix Determination (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Guo, Y.; Parker, R.

    2014-01-01

    Current theoretical bearing models differ in their stiffness estimates because of different model assumptions. In this study, a finite element/contact mechanics model is developed for rolling element bearings with the focus of obtaining accurate bearing stiffness for a wide range of bearing types and parameters. A combined surface integral and finite element method is used to solve for the contact mechanics between the rolling elements and races. This model captures the time-dependent characteristics of the bearing contact due to the orbital motion of the rolling elements. A numerical method is developed to determine the full bearing stiffness matrix corresponding to two radial, one axial, and two angular coordinates; the rotation about the shaft axis is free by design. This proposed stiffness determination method is validated against experiments in the literature and compared to existing analytical models and widely used advanced computational methods. The fully-populated stiffness matrix demonstrates the coupling between bearing radial, axial, and tilting bearing deflections.

  11. Alloying Characteristics of the Rare Earth Elements with the Transition Elements

    National Research Council Canada - National Science Library

    Elliott, Rodney

    1964-01-01

    The alloying characteristics of the rare earth elements with the transition metals undergo a radical change as the atomic number of the transition series increases - - transition elements in Groups...

  12. Multi-Element Lean Direct Injection Combustor Single Element Demonstration, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose to demonstrate the feasibility in a single element of a Multi-Element Lean Direct Injection, ME-LDI, Combustion concept. The concept will have the...

  13. 7 CFR 29.2351 - Elements of quality and degrees of each element.

    Science.gov (United States)

    2010-01-01

    ... designated as elements of quality. The range within each element is expressed by words or terms designated as... Moderate Deep. Width Narrow Normal Spready Broad. Uniformity. Expressed in percentages. Injury tolerance. Expressed in percentages. sizes ...

  14. 7 CFR 29.2601 - Elements of quality and degrees of each element.

    Science.gov (United States)

    2010-01-01

    ... designated as elements of quality. The range within each element is expressed by words or terms designated as... Moderate Deep. Width Narrow Normal Spready. Uniformity......Expressed in percentages. Injury tolerance...Expressed in percentages. Sizes ...

  15. Restraint system for core elements of a reactor core

    International Nuclear Information System (INIS)

    Class, G.

    1975-01-01

    In a nuclear reactor, a core element bundle formed of a plurality of side-by-side arranged core elements is surrounded by restraining elements that exert a radially inwardly directed restraining force generating friction forces between the core elements in a restraining plane that is transverse to the core element axes. The adjoining core elements are in rolling contact with one another in the restraining plane by virtue of rolling-type bearing elements supported in the core elements

  16. Control volume finite element method with multidimensional edge element Scharfetter-Gummel upwinding. Part 1, formulation.

    Energy Technology Data Exchange (ETDEWEB)

    Bochev, Pavel Blagoveston

    2011-06-01

    We develop a new formulation of the Control Volume Finite Element Method (CVFEM) with a multidimensional Scharfetter-Gummel (SG) upwinding for the drift-diffusion equations. The formulation uses standard nodal elements for the concentrations and expands the flux in terms of the lowest-order Nedelec H(curl; {Omega})-compatible finite element basis. The SG formula is applied to the edges of the elements to express the Nedelec element degree of freedom on this edge in terms of the nodal degrees of freedom associated with the endpoints of the edge. The resulting upwind flux incorporates the upwind effects from all edges and is defined at the interior of the element. This allows for accurate evaluation of integrals on the boundaries of the control volumes for arbitrary quadrilateral elements. The new formulation admits efficient implementation through a standard loop over the elements in the mesh followed by loops over the element nodes (associated with control volume fractions in the element) and element edges (associated with flux degrees of freedom). The quantities required for the SG formula can be precomputed and stored for each edge in the mesh for additional efficiency gains. For clarity the details are presented for two-dimensional quadrilateral grids. Extension to other element shapes and three dimensions is straightforward.

  17. Building Spectral Element Dynamic Matrices Using Finite Element Models of Waveguide Slices and Elastodynamic Equations

    Directory of Open Access Journals (Sweden)

    P.B. Silva

    2013-01-01

    Full Text Available Structural spectral elements are formulated using the analytical solution of the applicable elastodynamic equations and, therefore, mesh refinement is not needed to analyze high frequency behavior provided the elastodynamic equations used remain valid. However, for modeling complex structures, standard spectral elements require long and cumbersome analytical formulation. In this work, a method to build spectral finite elements from a finite element model of a slice of a structural waveguide (a structure with one dimension much larger than the other two is proposed. First, the transfer matrix of the structural waveguide is obtained from the finite element model of a thin slice. Then, the wavenumbers and wave propagation modes are obtained from the transfer matrix and used to build the spectral element matrix. These spectral elements can be used to model homogeneous waveguides with constant cross section over long spans without the need of refining the finite element mesh along the waveguide. As an illustrating example, spectral elements are derived for straight uniform rods and beams and used to calculate the forced response in the longitudinal and transverse directions. Results obtained with the spectral element formulation are shown to agree well with results obtained with a finite element model of the whole beam. The proposed approach can be used to generate spectral elements of waveguides of arbitrary cross section and, potentially, of arbitrary order.

  18. Combining classifiers for robust PICO element detection

    Directory of Open Access Journals (Sweden)

    Grad Roland

    2010-05-01

    Full Text Available Abstract Background Formulating a clinical information need in terms of the four atomic parts which are Population/Problem, Intervention, Comparison and Outcome (known as PICO elements facilitates searching for a precise answer within a large medical citation database. However, using PICO defined items in the information retrieval process requires a search engine to be able to detect and index PICO elements in the collection in order for the system to retrieve relevant documents. Methods In this study, we tested multiple supervised classification algorithms and their combinations for detecting PICO elements within medical abstracts. Using the structural descriptors that are embedded in some medical abstracts, we have automatically gathered large training/testing data sets for each PICO element. Results Combining multiple classifiers using a weighted linear combination of their prediction scores achieves promising results with an f-measure score of 86.3% for P, 67% for I and 56.6% for O. Conclusions Our experiments on the identification of PICO elements showed that the task is very challenging. Nevertheless, the performance achieved by our identification method is competitive with previously published results and shows that this task can be achieved with a high accuracy for the P element but lower ones for I and O elements.

  19. The Electronic Structure of Heavy Element Complexes

    Energy Technology Data Exchange (ETDEWEB)

    Bursten, Bruce E.

    2000-07-25

    The area of study is the bonding in heavy element complexes, and the application of more sophisticated electronic structure theories. Progress is recounted in several areas: (a) technological advances and current methodologies - Relativistic effects are extremely important in gaining an understanding of the electronic structure of compounds of the actinides, transactinides, and other heavy elements. Therefore, a major part of the continual benchmarking was the proper inclusion of the appropriate relativistic effects for the properties under study. (b) specific applications - These include organoactinide sandwich complexes, CO activation by actinide atoms, and theoretical studies of molecules of the transactinide elements. Finally, specific directions in proposed research are described.

  20. Finite element analysis of piezoelectric materials

    International Nuclear Information System (INIS)

    Lowrie, F.; Stewart, M.; Cain, M.; Gee, M.

    1999-01-01

    This guide is intended to help people wanting to do finite element analysis of piezoelectric materials by answering some of the questions that are peculiar to piezoelectric materials. The document is not intended as a complete beginners guide for finite element analysis in general as this is better dealt with by the individual software producers. The guide is based around the commercial package ANSYS as this is a popular package amongst piezoelectric material users, however much of the information will still be useful to users of other finite element codes. (author)

  1. The ENCODE (ENCyclopedia Of DNA Elements) Project.

    Science.gov (United States)

    2004-10-22

    The ENCyclopedia Of DNA Elements (ENCODE) Project aims to identify all functional elements in the human genome sequence. The pilot phase of the Project is focused on a specified 30 megabases (approximately 1%) of the human genome sequence and is organized as an international consortium of computational and laboratory-based scientists working to develop and apply high-throughput approaches for detecting all sequence elements that confer biological function. The results of this pilot phase will guide future efforts to analyze the entire human genome.

  2. Photoshop Elements 10 The Missing Manual

    CERN Document Server

    Brundage, Barbara

    2011-01-01

    Elements 10 offers much of Photoshop's power without the huge price tag. It's a great tool for most image-editing buffs-whether you're a photographer, scrapbooker, or aspiring graphic artist. But Elements still doesn't come with a useful manual. This bestselling book helps you get the most out of the program, from the basics to advanced tips for both Windows and Mac users. The important stuff you need to know: Quickly learn your way around. Customize Elements to suit your working style.Get to work right away. Import, organize, and make quick image fixes with ease.Retouch any image. Learn how

  3. Photoshop Elements 5 The Missing Manual

    CERN Document Server

    Brundage, Barbara

    2006-01-01

    Anyone still think that Adobe Photoshop Elements is a toy version of the real thing? As the most popular photo-editing program on the market, Photoshop Elements not only has Photoshop's marvelous powers, but also has capabilities the mothership lacks. Each new version includes more tools designed specifically for today's consumer digital photo enthusiasts. The latest edition, Photoshop Elements 5, solidifies the reputation of this superb and inexpensive product with new scrapbook features, a link to online photo services, and many other improvements. In fact, there's so much to Photoshop Ele

  4. Photoshop Elements 9 the missing manual

    CERN Document Server

    Brundage, Barbara

    2010-01-01

    Elements 9 offers much of Photoshop's power without the huge price tag. It's an ideal tool for most image-editing buffs -- including scrapbookers, photographers, and aspiring graphic artists. But Elements still doesn't come with a decent manual. This bestselling book will help you get the most out of the program, from the basics to advanced tips for both Windows and Mac. Quickly learn your way around. Customize Elements to suit your working style.Get to work right away. Import, organize, and make quick image fixes with ease.Retouch any image. Learn how to repair and restore your old and damag

  5. The Superheavy Elements and Anti-Gravity

    Science.gov (United States)

    Anastasovski, Petar K.

    2004-02-01

    The essence of any propulsion concept is to overcome gravity. Anti-gravity is a natural means to achieve this. Thus, the technology to pursue anti-gravity, by using superheavy elements, may provide a new propulsion paradigm. The theory of superluminal relativity provides a hypothesis for existence of elements with atomic number up to Z = 145, some of which may possess anti-gravity properties. Analysis results show that curved space-time exists demonstrating both gravitic and anti-gravitic properties not only around nuclei but inside the nuclei as well. Two groups of elements (Z Hawking, in honour of Stephen W. Hawking.

  6. Determination of light elements in amalgam restorations

    International Nuclear Information System (INIS)

    Hanson, A.L.; Jones, K.W.; Kraner, H.W.; Osborne, J.W.; Nelson, G.V.

    1982-01-01

    Rutherford backscattering has been used to measure the major elemental compositions in the near-surface regions of freshly prepared and used samples of dental amalgam. A depletion from bulk stoichiometry of the major elements, which indicates an accumulation of lighter elements on the surface of the materials, has been observed. Increases in the F, Na, Cl, P, O, C, and N concentrations between freshly prepared samples and used samples were measured by observation of gamma rays produced by proton and deuteron induced reactions

  7. Electrical machine analysis using finite elements

    CERN Document Server

    Bianchi, Nicola

    2005-01-01

    OUTLINE OF ELECTROMAGNETIC FIELDSVector AnalysisElectromagnetic FieldsFundamental Equations SummaryReferencesBASIC PRINCIPLES OF FINITE ELEMENT METHODSIntroductionField Problems with Boundary ConditionsClassical Method for the Field Problem SolutionThe Classical Residual Method (Galerkin's Method)The Classical Variational Method (Rayleigh-Ritz's Method)The Finite Element MethodReferencesAPPLICATIONS OF THE FINITE ELEMENT METHOD TO TWO-DIMENSIONAL FIELDSIntroductionLinear Interpolation of the Function fApplication of the Variational MethodSimple Descriptions of Electromagnetic FieldsAppendix: I

  8. Recent research on the heavy transuranium elements

    International Nuclear Information System (INIS)

    Seaborg, G.T.

    1988-09-01

    This review is devoted to recent research (performed in the 1980s) on the heavy members of the group, defined as the transcurium elements (with a few references to related work on lighter elements). It covers the discovery of the three heaviest elements, the discovery of new isotopes, investigation of interesting decay properties of some previously known isotopes, investigations of some heavy ion reaction mechanisms in this region, and recent investigations of nuclear and chemical properties. It is not exhaustive in its coverage, is necessarily succinct, and inevitably places emphasis on those aspects with which the author is most familiar. 92 refs., 3 figs

  9. Trace elements as paradigms of developmental neurotoxicants

    DEFF Research Database (Denmark)

    Grandjean, Philippe; Herz, Katherine T

    2015-01-01

    Trace elements have contributed unique insights into developmental neurotoxicity and serve as paradigms for such adverse effects. Many trace elements are retained in the body for long periods and can be easily measured to assess exposure by inexpensive analytical methods that became available...... neurotoxicants that provide a reference for other substances that may have similar adverse effects. Less evidence is available on manganese, fluoride, and cadmium, but experience from the former trace elements suggest that, with time, adverse effects are likely to be documented at exposures previously thought...

  10. Trace element analysis in soy sauce. 2

    International Nuclear Information System (INIS)

    Haruyama, Yoichi; Saito, Manabu; Tomita, Michio; Yoshida, Koji.

    1994-01-01

    Trace elements in four kinds of soybean and three kinds of salt have been measured by means of in-air PIXE. In soybeans, which were made in Japan, America, Canada and China, six kinds of trace elements were detected, such as Mn, Fe, Ni, Cu, Zn and Br. The concentration of these elements varied depending on the place they were made. American soybean showed characteristic feature compared with other soybeans. As to the bromine concentration, American soybean contains ten times as much as Japanese one. In salts Br and Sr were detected. (author)

  11. MRT fuel element inspection at Dounreay

    International Nuclear Information System (INIS)

    Gibson, J.

    1997-01-01

    To ensure that their production and inspection processes are performed in an acceptable manner, ie. auditable and traceable, the MTR Fuel Element Fabrication Plant at Dounreay operates to a documented quality system. This quality system, together with the fuel element manufacturing and inspection operations, has been independently certified to ISO9002-1987, EN29002-1987 and BS5750:Pt2:1987 by Lloyd's Register Quality Assurance Limited (LRQA). This certification also provides dual accreditation to the relevant German, Dutch and Australian certification bodies. This paper briefly describes the quality system, together with the various inspection stages involved in the manufacture of MTR fuel elements at Dounreay

  12. Mineral elements in milk and dairy products

    Directory of Open Access Journals (Sweden)

    Šimun Zamberlin

    2012-06-01

    Full Text Available Mineral elements occur in milk and dairy products as inorganic ions and salts, as well as part of organic molecules, such as proteins, fats, carbohydrates and nucleic acids. The chemical form of mineral elements is important because it determines their absorption in the intestine and their biological utilization. The mineral composition of milk is not constant because it depends on lactation phase, nutritional status of the animal, and environmental and genetic factors. The objective of this research is to point out the research results of chemical form, content and nutritional importance of individual mineral elements that are present in various milks and dairy products.

  13. Nonstationary temperature field in the fuel element

    International Nuclear Information System (INIS)

    Vehauc, A.; Spasojevic, D.

    1970-03-01

    Nonstationary temperature field in the fuel element was examined for spatial and time distribution of the specific power generated in the fuel element. Analytical method was developed for calculating the temperature variation in the fuel element of a nuclear reactor for a typical shape of the heat generation function. The method is based on series expansion of the temperature field by self functions and application of Laplace transformation in time coordinate. For numerical calculation of the temperature distribution a computer code was developed based on the proposed method and applied on the ZUSE-Z-23 computer [sr

  14. Unconscious emotional effects of packaging design elements

    DEFF Research Database (Denmark)

    Liao, Lewis; Corsi, Armando; Lockshin, Larry

    This research investigates consumers’ unconscious emotional responses to packaging elements such as image, colour and font. The intensity and valence of the emotional response, in reaction to these packaging elements, is established by the use of skin conductance tests and facial electromyography...... on a convenience sample of 120 participants. The results suggest that image is the only element able to generate a significant effect on consumers’ unconscious emotional response. In addition, the results also suggest the interaction between image and colour has a significant effect on consumers’ unconscious...... response to packaging....

  15. A study on human hair element content as monitor for trace elements pollution in Eg

    International Nuclear Information System (INIS)

    Tadros, N.; Metwally, E.

    2004-01-01

    Trace element content in human is a suitable indicator of exposure to trace element pollutants. Concentration levels of 12 trace elements in human head hair samples collected from more than 23 individuals have been determined. The collected hair samples were classified into four groups collected from workers at nuclear research center and others far away from the center. Neutron activation analysis technique was used in the preset study. The data reported for trace elements content in different hair samples were discussed. Significant differences were observed for several elements levels. comparative studies demonstrated that the concentration of some elements in hair of exposed workers, are greater than those corresponding to non exposed workers. Also, there was no clear significant correlation between the elements content of different hair samples and the age of the donors

  16. Simple tangible language elements for young children

    CSIR Research Space (South Africa)

    Smith, Andrew C

    2009-06-01

    Full Text Available In this paper, researchers have proposed simple tangible language elements for very young children to use when constructing programmes. The equivalent Turtle Talk instructions are given for comparison. Two examples of the tangible language code...

  17. NEW RSW & Wall Fine Mixed Element Grid

    Data.gov (United States)

    National Aeronautics and Space Administration — RSW Fine Mixed Element Grid with viscous root wind tunnel wall. This grid is for a node-based unstructured solver. Quad Surface Faces= 38016 Tria Surface Faces=...

  18. Finite element methods a practical guide

    CERN Document Server

    Whiteley, Jonathan

    2017-01-01

    This book presents practical applications of the finite element method to general differential equations. The underlying strategy of deriving the finite element solution is introduced using linear ordinary differential equations, thus allowing the basic concepts of the finite element solution to be introduced without being obscured by the additional mathematical detail required when applying this technique to partial differential equations. The author generalizes the presented approach to partial differential equations which include nonlinearities. The book also includes variations of the finite element method such as different classes of meshes and basic functions. Practical application of the theory is emphasised, with development of all concepts leading ultimately to a description of their computational implementation illustrated using Matlab functions. The target audience primarily comprises applied researchers and practitioners in engineering, but the book may also be beneficial for graduate students.

  19. California aviation system plan : policy element.

    Science.gov (United States)

    2011-10-01

    The Policy Element (PE) is the primary document that explains and guides the business of the Division of Aeronautics (Division) that is housed in the California Department of Transportation (Caltrans). The Divisions primary duties and functions ar...

  20. Advanced finite element method in structural engineering

    CERN Document Server

    Long, Yu-Qiu; Long, Zhi-Fei

    2009-01-01

    This book systematically introduces the research work on the Finite Element Method completed over the past 25 years. Original theoretical achievements and their applications in the fields of structural engineering and computational mechanics are discussed.

  1. Fuel elements handling device and method

    International Nuclear Information System (INIS)

    Jabsen, F.S.

    1976-01-01

    This invention relates to nuclear equipment and more particularly to methods and apparatus for the non-destructive inspection, manipulation, disassembly and assembly of reactor fuel elements and the like. (author)

  2. Finite element analysis of tibial fractures

    DEFF Research Database (Denmark)

    Wong, Christian Nai En; Mikkelsen, Mikkel Peter W; Hansen, Leif Berner

    2010-01-01

    INTRODUCTION: Fractures of the tibial shaft are relatively common injuries. There are indications that tibial shaft fractures share characteristics in terms of site, type and local fracture mechanisms. In this study, we aimed to set up a mathematical, computer-based model using finite element...... of bony healing. The biomechanical results are the basis for fracture healing, biomechanical fall analysis and stability analysis of osteosynthesis. MATERIAL AND METHODS: A finite element model of the bony part of the lower leg was generated on the basis of computed tomography data from the Visible Human...... Project. The data consisted of 21,219 3D elements with a cortical shell and a trabecular core. Three types of load of torsion, a direct lateral load and axial compression were applied. RESULTS: The finite element linear static analysis resulted in relevant fracture localizations and indicated relevant...

  3. Multigrid methods for mortar finite elements

    OpenAIRE

    Wohlmuth, Barbara

    2000-01-01

    Multigrid methods for mortar finite elements / R. Krause ; B. Wohlmuth. - In: Multigrid methods VI / Erik Dick ... (ed.). - Berlin u.a. : Springer, 2000. - S. 136-142 (Lecture notes in computational science and engineering ; 14)

  4. Rare earth elements in nuclear medicine

    Directory of Open Access Journals (Sweden)

    Kodina G.E.

    2014-12-01

    Full Text Available The review focuses on the key applications of stable and radioactive isotopes of rare earth elements in the technology of nuclear medicine, radionuclide diagnostics and therapy, as well as magnetic resonance imaging and binary radiotherapy technologies.

  5. NEW RSW & Wall Coarse Mixed Element Grid

    Data.gov (United States)

    National Aeronautics and Space Administration — This is the Coarse Mixed Element Grid for the RSW with a viscous wall at the root. This grid is for a node-based unstructured solver. Quad Surface Faces= 9728 Tria...

  6. Preparation of fingernails for trace element analysis.

    Science.gov (United States)

    Bank, H L; Robson, J; Bigelow, J B; Morrison, J; Spell, L H; Kantor, R

    1981-10-26

    There are substantial differences in the reported elemental composition of human nails. Most investigators have used extensive washing procedures to minimize environmental contamination, however, such washing poses the risk of extraction of elements bound to the nail matrix. To determine if a portion of this variability could be accounted for by the "washing solutions" used by different investigators, nails were washed in nine solvents previously used for cleaning nails and their residual elemental composition measured by atomic absorption spectroscopy or energy dispersion analysis. In general, treatment with organic solvents resulted in less elemental loss than did treatment with aqueous detergents, while aqueous acids caused the greatest loss. Organic solvents more readily extracted iron and magnesium than calcium, copper and zinc. Virtually all of the magnesium was extracted by distilled water or aqueous detergents.

  7. Computation of Asteroid Proper Elements: Recent Advances

    Science.gov (United States)

    Knežević, Z.

    2017-12-01

    The recent advances in computation of asteroid proper elements are briefly reviewed. Although not representing real breakthroughs in computation and stability assessment of proper elements, these advances can still be considered as important improvements offering solutions to some practical problems encountered in the past. The problem of getting unrealistic values of perihelion frequency for very low eccentricity orbits is solved by computing frequencies using the frequency-modified Fourier transform. The synthetic resonant proper elements adjusted to a given secular resonance helped to prove the existence of Astraea asteroid family. The preliminary assessment of stability with time of proper elements computed by means of the analytical theory provides a good indication of their poorer performance with respect to their synthetic counterparts, and advocates in favor of ceasing their regular maintenance; the final decision should, however, be taken on the basis of more comprehensive and reliable direct estimate of their individual and sample average deviations from constancy.

  8. Computation of asteroid proper elements: Recent advances

    Directory of Open Access Journals (Sweden)

    Knežević Z.

    2017-01-01

    Full Text Available The recent advances in computation of asteroid proper elements are briefly reviewed. Although not representing real breakthroughs in computation and stability assessment of proper elements, these advances can still be considered as important improvements offering solutions to some practical problems encountered in the past. The problem of getting unrealistic values of perihelion frequency for very low eccentricity orbits is solved by computing frequencies using the frequencymodified Fourier transform. The synthetic resonant proper elements adjusted to a given secular resonance helped to prove the existence of Astraea asteroid family. The preliminary assessment of stability with time of proper elements computed by means of the analytical theory provides a good indication of their poorer performance with respect to their synthetic counterparts, and advocates in favor of ceasing their regular maintenance; the final decision should, however, be taken on the basis of more comprehensive and reliable direct estimate of their individual and sample average deviations from constancy.

  9. Third order transfer matrix elements of octopoles

    International Nuclear Information System (INIS)

    Heck, D.

    1976-04-01

    The matrix elements of the third order transport matrices for electrostatic and magnetic octopoles are derived. They are needed in ion optical calculations, if octopoles are used as correctors of image aberrations. (orig.) [de

  10. Finite Element Aircraft Simulation of Turbulence

    Science.gov (United States)

    1997-02-01

    A Simulation of Rotor Blade Element Turbulence (SORBET) model has been : developed for realtime aircraft simulation that accommodates stochastic : turbulence and distributed discrete gusts as a function of the terrain. This : model is applicable to c...

  11. Origin of the biologically important elements.

    Science.gov (United States)

    Trimble, V

    1997-06-01

    The chemical elements most widely distributed in terrestrial living creatures are the ones (apart from inert helium and neon) that are commonest in the Universe--hydrogen, oxygen, carbon, and nitrogen. A chemically different Universe would clearly have different biology, if any. We explore here the nuclear processes in stars, the early Universe, and elsewhere that have produced these common elements, and, while we are at it, also encounter the production of lithium, gold, uranium, and other elements of sociological, if not biological, importance. The relevant processes are, for the most part, well understood. Much less well understood is the overall history of chemical evolution of the Galaxy, from pure hydrogen and helium to the mix of elements we see today. One implication is that we cannot do a very good job of estimating how many stars and which ones might be orbited by habitable planets.

  12. Integrating Responsive Building Elements in Buildings

    DEFF Research Database (Denmark)

    Haase, Matthias; Amato, Alex; Heiselberg, Per

    2006-01-01

    energy strategies to develop guidelines and procedures for estimation of environmental performance of responsive building elements and integrated building concepts This paper introduces the ideas of this collaborative work and discusses its usefulness for Hong Kong and China. Special focus was put......There is a global need for a more sustainable building development. About 50% of energy is used in buildings indicating that buildings provide a considerable potential for operational energy savings. Studies were conducted with the following objectives: to perform a state-of-the-art review...... of responsive building elements, of integrated building concepts and of environmental performance assessment methods to improve and optimize responsive building elements to develop and optimize new building concepts with integration of responsive building elements, HVAC-systems as well as natural and renewable...

  13. The Elements of a Narrative Environment

    DEFF Research Database (Denmark)

    Grinder-Hansen, Arne; Schoenau-Fog, Henrik

    2013-01-01

    Reactions reflecting the psychology behind a user’s desire to play games have been addressed in a number of studies. However, this paper focuses on a more inclusive understanding of how game elements, such as controls and objects, play their part in interactive storytelling and games. Based...... on findings from user studies and game theory, an open game world was constructed, in order to serve as a test environment. A survey was then developed in order to identify reactions and patterns in user responses to frequently used game elements. This study thus attempts to provide an insight into general...... reactions to game elements in open game worlds, and it aims at laying the foundations for defining a process which can be applied to user relations with game elements. Furthermore, it has potential uses for improved game and interactive storytelling application design....

  14. Elemental Analysis and Biological Activities of Chrysophyllum ...

    African Journals Online (AJOL)

    Sapotaceae) Leaves. ... The plant material could be used as a source of important elements required for the body. In suitable form, the plant could be used in the prevention and treatment of dental caries, oxidative damage, obesity and cancer.

  15. FINITE ELEMENT MODEL FOR PREDICTING RESIDUAL ...

    African Journals Online (AJOL)

    direction (σx) had a maximum value of 375MPa (tensile) and minimum value of ... These results shows that the residual stresses obtained by prediction from the finite element method are in fair agreement with the experimental results.

  16. Discrete mechanics Based on Finite Element Methods

    OpenAIRE

    Chen, Jing-bo; Guo, Han-Ying; Wu, Ke

    2002-01-01

    Discrete Mechanics based on finite element methods is presented in this paper. We also explore the relationship between this discrete mechanics and Veselov discrete mechanics. High order discretizations are constructed in terms of high order interpolations.

  17. Data sheets on selected toxic elements

    International Nuclear Information System (INIS)

    Jaworski, J.F.

    1982-01-01

    The chemical elements considered in this volume have been identified as toxic to animal and vegetable life forms; however, these elements have not been studied as intensely as lead, mercury, cadmium, etc. Since, in most cases, existing data are insufficient to permit discussion and comparisons of relative quality, it was decided to present what quantitative data there are in as concise a manner as possible. The resulting data sheets present what is considered to be the best available information on the environmental levels, emissions and toxicology of these elements and some of their compounds. Reference is made to the article or review in which the datum appears and which may contain any discussion of the datum and the methods whereby it was obtained. Elements considered in this volume are antimony, barium, beryllium, bismuth, boron, cesium, gallium, germanium, indium, molybdenum, silver, tellurium, thallium, tin, uranium and zirconium

  18. ANSYS mechanical APDL for finite element analysis

    CERN Document Server

    Thompson, Mary Kathryn

    2017-01-01

    ANSYS Mechanical APDL for Finite Element Analysis provides a hands-on introduction to engineering analysis using one of the most powerful commercial general purposes finite element programs on the market. Students will find a practical and integrated approach that combines finite element theory with best practices for developing, verifying, validating and interpreting the results of finite element models, while engineering professionals will appreciate the deep insight presented on the program's structure and behavior. Additional topics covered include an introduction to commands, input files, batch processing, and other advanced features in ANSYS. The book is written in a lecture/lab style, and each topic is supported by examples, exercises and suggestions for additional readings in the program documentation. Exercises gradually increase in difficulty and complexity, helping readers quickly gain confidence to independently use the program. This provides a solid foundation on which to build, preparing readers...

  19. Finite elements in CAD and ADINA

    International Nuclear Information System (INIS)

    Bathe, K.J.

    1986-01-01

    The use of finite element methods in computer-aided-design - CAD - is discussed. Some current capabilities are presented and important future developments are outlined. The discussion focusses on the use of the ADINA program in CAD applications. (orig.)

  20. Analysis of light elements by PIGE

    International Nuclear Information System (INIS)

    Kim, Y. S.; Choi, H. W.; Kim, D. K.; Woo, H. J.; Kim, N. B.; Park, K. S.

    2000-01-01

    The PIGE (Proton Induced Gamma ray Emission) method was applied for the measurement of light elements Li - K. A test measurement has been performed for geological, biological, environmental and material samples by using a standard sample for each element. The measurement was performed for the two proton energies of 2.4 and 3.4 MeV, and 3.4MeV was found to yield better result for multielemental analysis. The result shows a fair agreement within 15% for all elements with standard values. The detection limits of Li, B, F and Na are less than 100 ppm, while those of the other elements are from a few hundred ppm to a few percents. (author)

  1. NEUTRONIC REACTOR AND FUEL ELEMENT THEREFOR

    Science.gov (United States)

    Szilard, L.; Young, G.J.

    1958-03-01

    This patent relates to a reactor design of the type which employs solid fuel elements disposed in channels within the moderator through which channels and around the fuel elements is conveyed a coolant fiuid. The coolant channels are comprised of aluminum tubes extending through a solid moderator such as graphite and the fuel elements are comprised of an elongated solid body of natural uranium jacketed in an aluminum jacket with the ends thereof closed by aluminum caps of substantially greater thickness than the jacket was and in good thermal contact with the fuel material to facilitate the conduction of heat from the central portion of said ends to the coolant surrounding the fuel element to prevent overheating of said central portion.

  2. Molecular clusters of the main group elements

    CERN Document Server

    Driess, Matthias

    2008-01-01

    ""To summarize, Molecular Clusters of the Main Group Elements is certainly not a popular science book, nor is it a textbook; it is a very good, up-to-date collection of articles for the specialist. Als Fazit bleibt: Molecular Clusters of the Main Group Elements ist sicher kein populissenschaftliches Werk, auch kein Lehrbuch, aber eine gelungene, hoch aktuelle Zusammenstellung fen interessierten Fachmann."" -Michael Ruck, TU Dresden, Angewandte Chemie, 2004 - 116/36 + International Edition 2004 - 43/36

  3. Damper mechanism for nuclear reactor control elements

    International Nuclear Information System (INIS)

    Taft, W.E.

    1976-01-01

    A damper mechanism which provides a nuclear reactor control element decelerating function at the end of the scram stroke is described. The total damping function is produced by the combination of two assemblies, which operate in sequence. First, a tapered dashram assembly decelerates the control element to a lower velocity, after which a spring hydraulic damper assembly takes over to complete the final damping. 3 claims, 2 figures

  4. Finite element approximation of the Isaacs equation

    OpenAIRE

    Salgado, Abner J.; Zhang, Wujun

    2015-01-01

    We propose and analyze a two-scale finite element method for the Isaacs equation. The fine scale is given by the mesh size $h$ whereas the coarse scale $\\varepsilon$ is dictated by an integro-differential approximation of the partial differential equation. We show that the method satisfies the discrete maximum principle provided that the mesh is weakly acute. This, in conjunction with weak operator consistency of the finite element method, allows us to establish convergence of the numerical s...

  5. Trace element analysis of nail polishes

    International Nuclear Information System (INIS)

    Misra, G.; Mittal, V.K.; Sahota, H.S.

    1999-01-01

    Instrumental neutron activation analysis (INAA) technique was used to measure the concentrations of various trace elements in nail polishes of popular Indian and foreign brands. The aim of the present experiment was to see whether trace elements could distinguish nail polishes of different Indian and foreign brands from forensic point of view. It was found that cesium can act as a marker to differentiate foreign and Indian brands. (author)

  6. Trace elements distribution in environmental compartments

    Energy Technology Data Exchange (ETDEWEB)

    Queiroz, Juliana C. de; Peres, Sueli da Silva; Godoy, Maria Luiza D.P., E-mail: suelip@ird.gov.br [Instituto de Radioprotecao e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

    2017-11-01

    Trace elements term defines the presence of low concentrations metals at environment. Some of them are considered biologically essential, as Co, Cu and Mn. Others can cause detriment to environment and human health, as Pb, Cd, Hg, As, Ti and U. A large number of them have radioactive isotopes, implying the evaluation of risks for human health should be done considering the precepts of environmental radiological protection. The ecosystem pollution with trace elements generates changes at the geochemistry cycle of these elements and in environmental quality. Soils have single characteristics when compared with another components of biosphere (air, water and biota), cause they introduce themselves not only as a drain towards contaminants, but also as natural buffer that control the transport of chemical elements and other substances for atmosphere, hydrosphere and biota. The main purpose of environmental monitoring program is to evaluate the levels of contaminants in the various compartments of the environment: natural or anthropogenic, and to assess the contribution of a potential contaminant source on the environment. Elemental Composition for the collected samples was determined by inductively coupled plasma mass spectroscopy. The main objective of this work was to evaluate the map baseline of concentration of interest trace elements in environmental samples of water, sediment and soil from Environmental Monitoring Program of Instituto de Radioprotecao e Dosimetria (IRD). The samples were analyzed using an inductively coupled plasma mass spectrometer (ICP-MS) at IRD. >From the knowledge of trace elements concentrations, could be evaluated the environmental quality parameters at the studied ecosystems. The data allowed evaluating some relevant aspects of the study of trace elements in soil and aquatic systems, with emphasis at the distribution, concentration and identification of main anthropic sources of contamination at environment. (author)

  7. Finite Element Model of Gear Induction Hardening

    OpenAIRE

    Hodek, J; Zemko, M; Shykula, P

    2015-01-01

    International audience; This paper presents a finite element model of a gear induction hardening process. The gear was surface-heated by an induction coil and quickly cooled by spraying water. The finite element model was developed as a three-dimensional model. The electromagnetic field, temperature field, stress distribution and microstructure distribution were examined. Temperature and microstructural characteristics were measured and used. The gear material data was obtained in part by mea...

  8. The finite element method in electromagnetics

    CERN Document Server

    Jin, Jianming

    2014-01-01

    A new edition of the leading textbook on the finite element method, incorporating major advancements and further applications in the field of electromagnetics The finite element method (FEM) is a powerful simulation technique used to solve boundary-value problems in a variety of engineering circumstances. It has been widely used for analysis of electromagnetic fields in antennas, radar scattering, RF and microwave engineering, high-speed/high-frequency circuits, wireless communication, electromagnetic compatibility, photonics, remote sensing, biomedical engineering, and space exploration. The

  9. Quadrilateral/hexahedral finite element mesh coarsening

    Science.gov (United States)

    Staten, Matthew L; Dewey, Mark W; Scott, Michael A; Benzley, Steven E

    2012-10-16

    A technique for coarsening a finite element mesh ("FEM") is described. This technique includes identifying a coarsening region within the FEM to be coarsened. Perimeter chords running along perimeter boundaries of the coarsening region are identified. The perimeter chords are redirected to create an adaptive chord separating the coarsening region from a remainder of the FEM. The adaptive chord runs through mesh elements residing along the perimeter boundaries of the coarsening region. The adaptive chord is then extracted to coarsen the FEM.

  10. Børnehaven De fire Elementer

    DEFF Research Database (Denmark)

    Sørensen, Hanne Værum

    I projektet undersøges og beskrives arbejdet i børnehaven De fire Elementer, med særligt fokus på kønsopdelingen fire formiddage om ugen.......I projektet undersøges og beskrives arbejdet i børnehaven De fire Elementer, med særligt fokus på kønsopdelingen fire formiddage om ugen....

  11. Surgery simulation using fast finite elements

    DEFF Research Database (Denmark)

    Bro-Nielsen, Morten

    1996-01-01

    This paper describes our recent work on real-time surgery simulation using fast finite element models of linear elasticity. In addition, we discuss various improvements in terms of speed and realism......This paper describes our recent work on real-time surgery simulation using fast finite element models of linear elasticity. In addition, we discuss various improvements in terms of speed and realism...

  12. Using reciprocity in Boundary Element Calculations

    DEFF Research Database (Denmark)

    Juhl, Peter Møller; Cutanda Henriquez, Vicente

    2010-01-01

    The concept of reciprocity is widely used in both theoretical and experimental work. In Boundary Element calculations reciprocity is sometimes employed in the solution of computationally expensive scattering problems, which sometimes can be more efficiently dealt with when formulated as the recip......The concept of reciprocity is widely used in both theoretical and experimental work. In Boundary Element calculations reciprocity is sometimes employed in the solution of computationally expensive scattering problems, which sometimes can be more efficiently dealt with when formulated...

  13. A CAREM type fuel element dynamic analysis

    International Nuclear Information System (INIS)

    Magoia, J.E.

    1990-01-01

    A first analysis on the dynamic behaviour of a fuel element designed for the CAREM nuclear reactor (Central Argentina de Elementos Modulares) was performed. The model used to represent this dynamic behaviour was satisfactorily evaluated. Using primary estimations for some of its numerical parameters, a first approximation to its natural vibrational modes was obtained. Results obtained from fuel elements frequently used in nuclear power plants of the PWR (Pressurized Water Reactors) type, are compared with values resulting from similar analysis. (Author) [es

  14. Trace elements distribution in environmental compartments

    International Nuclear Information System (INIS)

    Queiroz, Juliana C. de; Peres, Sueli da Silva; Godoy, Maria Luiza D.P.

    2017-01-01

    Trace elements term defines the presence of low concentrations metals at environment. Some of them are considered biologically essential, as Co, Cu and Mn. Others can cause detriment to environment and human health, as Pb, Cd, Hg, As, Ti and U. A large number of them have radioactive isotopes, implying the evaluation of risks for human health should be done considering the precepts of environmental radiological protection. The ecosystem pollution with trace elements generates changes at the geochemistry cycle of these elements and in environmental quality. Soils have single characteristics when compared with another components of biosphere (air, water and biota), cause they introduce themselves not only as a drain towards contaminants, but also as natural buffer that control the transport of chemical elements and other substances for atmosphere, hydrosphere and biota. The main purpose of environmental monitoring program is to evaluate the levels of contaminants in the various compartments of the environment: natural or anthropogenic, and to assess the contribution of a potential contaminant source on the environment. Elemental Composition for the collected samples was determined by inductively coupled plasma mass spectroscopy. The main objective of this work was to evaluate the map baseline of concentration of interest trace elements in environmental samples of water, sediment and soil from Environmental Monitoring Program of Instituto de Radioprotecao e Dosimetria (IRD). The samples were analyzed using an inductively coupled plasma mass spectrometer (ICP-MS) at IRD. >From the knowledge of trace elements concentrations, could be evaluated the environmental quality parameters at the studied ecosystems. The data allowed evaluating some relevant aspects of the study of trace elements in soil and aquatic systems, with emphasis at the distribution, concentration and identification of main anthropic sources of contamination at environment. (author)

  15. Einspannung in der ein mechanisches Element gehalten ist

    OpenAIRE

    Roedig, T.; Schoenecker, A.; Brueckner, B.

    2005-01-01

    WO2005073591 A UPAB: 20050902 NOVELTY - Gripping element for holding a mechanical element (1) is configured as a rigid gripping element with at least two supports, preferably a fixed (2) and a moveable bearing (3). The gripping element also has at least one actuator (4) that is configured to apply a force and or torque to the element. USE - Gripping element for holding a mechanical element, e.g. to permit strength testing. ADVANTAGE - Dynamic alternating loads acting upon the mechanical eleme...

  16. PIXE - a new method for elemental analysis

    International Nuclear Information System (INIS)

    Johansson, S.A.E.

    1983-01-01

    With elemental analysis we mean the determination of which chemical elements are present in a sample and of their concentration. This is an old and important problem in chemistry. The earliest methods were purely chemical and many such methods are still used. However, various methods based on physical principles have gradually become more and more important. One such method is neutron activation. When the sample is bombarded with neutrons it becomes radioactive and the various radioactive isotopes produced can be identified by the radiation they emit. From the measured intensity of the radiation one can calculate how much of a certain element that is present in the sample. Another possibility is to study the light emitted when the sample is excited in various ways. A spectroscopic investigation of the light can identify the chemical elements and allows also a determination of their concentration in the sample. In the same way, if a sample can be brought to emit X-rays, this radiation is also characteristic for the elements present and can be used to determine the elemental concentration. One such X-ray method which has been developed recently is PIXE. The name is an acronym for Particle Induced X-ray Emission and indicates the principle of the method. Particles in this context means heavy, charged particles such as protons and a-particles of rather high energy. Hence, in PIXE-analysis the sample is irradiated in the beam of an accelerator and the emitted X-rays are studied. (author)

  17. Chemical analysis of rare earth elements

    International Nuclear Information System (INIS)

    Tsukahara, Ryoichi; Sakoh, Takefumi; Nagai, Iwao

    1994-01-01

    Recently attention has been paid to ICP-AES or ICP-MS, and the reports on the analysis of rare earth elements by utilizing these methods continue to increase. These reports have become to take about 30% of the reports on rare earth analysis, and this is because these methods are highly sensitive to rare earth elements, and also these methods have spread widely. In ICP-AES and ICP-MS, mostly solution samples are measured, therefore, solids must be made into solution. At the time of quantitatively determining the rare earth elements of low concentration, separation and concentration are necessary. Referring to the literatures reported partially in 1990 and from 1991 to 1993, the progress of ICP-AES and ICP-MS is reported. Rare earth oxides and the alloys containing rare earth elements are easily decomposed with acids, but the decomposition of rocks is difficult, and its method is discussed. The separation of the rare earth elements from others in geochemical samples, cation exchange process is frequently utilized. Also solvent extraction process has been studied. For the separation of rare earth elements mutually, chromatography is used. The spectral interference in spectral analysis was studied. The comparison of these methods with other methods is reported. (K.I)

  18. ElemeNT: a computational tool for detecting core promoter elements.

    Science.gov (United States)

    Sloutskin, Anna; Danino, Yehuda M; Orenstein, Yaron; Zehavi, Yonathan; Doniger, Tirza; Shamir, Ron; Juven-Gershon, Tamar

    2015-01-01

    Core promoter elements play a pivotal role in the transcriptional output, yet they are often detected manually within sequences of interest. Here, we present 2 contributions to the detection and curation of core promoter elements within given sequences. First, the Elements Navigation Tool (ElemeNT) is a user-friendly web-based, interactive tool for prediction and display of putative core promoter elements and their biologically-relevant combinations. Second, the CORE database summarizes ElemeNT-predicted core promoter elements near CAGE and RNA-seq-defined Drosophila melanogaster transcription start sites (TSSs). ElemeNT's predictions are based on biologically-functional core promoter elements, and can be used to infer core promoter compositions. ElemeNT does not assume prior knowledge of the actual TSS position, and can therefore assist in annotation of any given sequence. These resources, freely accessible at http://lifefaculty.biu.ac.il/gershon-tamar/index.php/resources, facilitate the identification of core promoter elements as active contributors to gene expression.

  19. Comparison of hexahedral and tetrahedral elements in finite element analysis of the foot and footwear.

    Science.gov (United States)

    Tadepalli, Srinivas C; Erdemir, Ahmet; Cavanagh, Peter R

    2011-08-11

    Finite element analysis has been widely used in the field of foot and footwear biomechanics to determine plantar pressures as well as stresses and strains within soft tissue and footwear materials. When dealing with anatomical structures such as the foot, hexahedral mesh generation accounts for most of the model development time due to geometric complexities imposed by branching and embedded structures. Tetrahedral meshing, which can be more easily automated, has been the approach of choice to date in foot and footwear biomechanics. Here we use the nonlinear finite element program Abaqus (Simulia, Providence, RI) to examine the advantages and disadvantages of tetrahedral and hexahedral elements under compression and shear loading, material incompressibility, and frictional contact conditions, which are commonly seen in foot and footwear biomechanics. This study demonstrated that for a range of simulation conditions, hybrid hexahedral elements (Abaqus C3D8H) consistently performed well while hybrid linear tetrahedral elements (Abaqus C3D4H) performed poorly. On the other hand, enhanced quadratic tetrahedral elements with improved stress visualization (Abaqus C3D10I) performed as well as the hybrid hexahedral elements in terms of contact pressure and contact shear stress predictions. Although the enhanced quadratic tetrahedral element simulations were computationally expensive compared to hexahedral element simulations in both barefoot and footwear conditions, the enhanced quadratic tetrahedral element formulation seems to be very promising for foot and footwear applications as a result of decreased labor and expedited model development, all related to facilitated mesh generation. Copyright © 2011. Published by Elsevier Ltd.

  20. Macro-Elements and Trace Elements in Cereal Grains Cultivated in Latvia

    Directory of Open Access Journals (Sweden)

    Jākobsone Ida

    2015-09-01

    Full Text Available Cereal-based foods have great importance in the compensation of micro- and trace element deficiency, because 50% of the foods produced worldwide are made up of cereal grains. The aim of the research was to determine the concentration of macro-elements and trace elements in different cereals cultivated in Latvia. Various cereals were used in the research: rye (n = 45, barley (n = 54, spring wheat (n = 27, winter wheat (n = 53, triticale (n = 45 and oats (n = 42. Thirteen macro- and trace elements (Cd, Pb, Ni, Cr, Al, Cu, K, Na, Mn, Fe, Zn, Mg, Ca were determined in cereal grain samples (n = 266. Macro-elements and trace elements varied significantly (p < 0.01 or p < 0.001. The highest concentrations of macro- and trace elements were found in oats and the lowest in rye. The obtained data will expand the opportunity for food and nutrition scientists to evaluate content of the examined elements in grain products, and dietary consumption (bioavailability of the examined macro-elements and trace elements.

  1. Finite element simulation of articular contact mechanics with quadratic tetrahedral elements.

    Science.gov (United States)

    Maas, Steve A; Ellis, Benjamin J; Rawlins, David S; Weiss, Jeffrey A

    2016-03-21

    Although it is easier to generate finite element discretizations with tetrahedral elements, trilinear hexahedral (HEX8) elements are more often used in simulations of articular contact mechanics. This is due to numerical shortcomings of linear tetrahedral (TET4) elements, limited availability of quadratic tetrahedron elements in combination with effective contact algorithms, and the perceived increased computational expense of quadratic finite elements. In this study we implemented both ten-node (TET10) and fifteen-node (TET15) quadratic tetrahedral elements in FEBio (www.febio.org) and compared their accuracy, robustness in terms of convergence behavior and computational cost for simulations relevant to articular contact mechanics. Suitable volume integration and surface integration rules were determined by comparing the results of several benchmark contact problems. The results demonstrated that the surface integration rule used to evaluate the contact integrals for quadratic elements affected both convergence behavior and accuracy of predicted stresses. The computational expense and robustness of both quadratic tetrahedral formulations compared favorably to the HEX8 models. Of note, the TET15 element demonstrated superior convergence behavior and lower computational cost than both the TET10 and HEX8 elements for meshes with similar numbers of degrees of freedom in the contact problems that we examined. Finally, the excellent accuracy and relative efficiency of these quadratic tetrahedral elements was illustrated by comparing their predictions with those for a HEX8 mesh for simulation of articular contact in a fully validated model of the hip. These results demonstrate that TET10 and TET15 elements provide viable alternatives to HEX8 elements for simulation of articular contact mechanics. Copyright © 2016 Elsevier Ltd. All rights reserved.

  2. Plane-wave basis finite elements and boundary elements for three-dimensional wave scattering.

    Science.gov (United States)

    Perrey-Debain, E; Laghrouche, O; Bettess, P; Trevelyan, J

    2004-03-15

    Classical finite-element and boundary-element formulations for the Helmholtz equation are presented, and their limitations with respect to the number of variables needed to model a wavelength are explained. A new type of approximation for the potential is described in which the usual finite-element and boundary-element shape functions are modified by the inclusion of a set of plane waves, propagating in a range of directions evenly distributed on the unit sphere. Compared with standard piecewise polynomial approximation, the plane-wave basis is shown to give considerable reduction in computational complexity. In practical terms, it is concluded that the frequency for which accurate results can be obtained, using these new techniques, can be up to 60 times higher than that of the conventional finite-element method, and 10 to 15 times higher than that of the conventional boundary-element method.

  3. Swedish Chemists and Discovery of the Elements

    Science.gov (United States)

    Thomsen, Volker

    1996-10-01

    All of the elements not already known from antiquity were discovered in Europe and North America. So which country ranks number one on the discovery list? The question occurred to me while leafing through reference 1 in search of thermodynamic data on silicon. Never having seen such a tabulation, I wondered if it might prove useful in teaching. The question has a sports-related flavor that will appeal to many students. Personally, I picked England or Germany for #1. The actual result is surprising. The ranking considering only up to atomic number 103 is as follows: Note: Where two or more independent discoveries have been made, each country is credited. In the "others" category Austria and Denmark each has two discoveries. The remaining countries, with one each, are Finland, Italy, Mexico, Poland, Romania, Russia, and Spain. The high place for the USA is primarily due to the work done at Berkeley and Los Alamos on the transuranics. Without these discoveries, the US would have tied with Switzerland at three elements. Perhaps the most interesting aspect of this tabulation is that Swedish chemists have discovered the most elements. Four chemists alone account for twelve of the 20 discoveries: Baron Jöns Jakob Berzelius (1779-1848) is credited with four elements. His pupil, friend, and assistant, Carl Gustav Mosander (1797-1858) discovered three. P. T. Cleve also found three elements and Karl Wilhelm Scheele (1742-1786) discovered two. Biographical research on the Swedish chemists is a suitable assignment at the introductory level. Reasons for the predominance of Swedish chemists presents a challenging student research topic in the history of chemistry. Another interesting question at the introductory level is, transuranics aside, who discovered the most elements? At the more advanced level the question becomes, why? Literature Cited: 1. Emsley, J. The Elements; Clarendon: Oxford, 1989.

  4. Chemical element balances in aerosol over

    International Nuclear Information System (INIS)

    Mizohata, Akira; Mamuro, Tetsuo

    1980-01-01

    Eighteen airborne particulate samples were collected with a low volume type of Andersen air sampler (a cascade impactor of 9 stages) at an appropriate interval in the period from 1974 to 1977, and the size separated particulate samples thus collected were subjected to multielement analysis (37 elements) by means of instrumental neutron activation method and energy dispersive X-ray fluorescence spectrometry. The results of multielement analysis were interpreted by a chemical-element balance method, considering the seven main sources, namely, soil particles of local origin, soil particles of global origin, marine aerosol, suspended particles from iron and steel industry, refuse incineration, fuel oil combustion and automobile exhaust, and taking as index elements the seven elements, namely, Na, Al, K, Sc, V, Mn and Pb. The predicted total concentrations in the atmosphere agree with the observed total concentrations for most elements within a factor of around two, with the exception of S, As, Se and W. The predicted size distributions agree with the observed size distributions for a large number of elements, but appreciable disagreements were found for the elements, S, Cl, Cr, Co, Ni, As, Se, Cd, Sb, I and W. The sum of the percent contributions to the total suspended particles of the seven main sources was about 50%. Among the other main sources, diesel exhaust and conversion of SO 2 gas into SO 4 2+ in the atmosphere appear to be the most important. The sum of the percent contributions of these two sources is assumed to be about 30%. The rest 20% is possibly attributed to secondary aerosol formation from NOx and hydrocarbon and emissions from various small aerosol generating facilities. (author)

  5. Introduction to finite and spectral element methods using Matlab

    CERN Document Server

    Pozrikidis, Constantine

    2014-01-01

    The Finite Element Method in One Dimension. Further Applications in One Dimension. High-Order and Spectral Elements in One Dimension. The Finite Element Method in Two Dimensions. Quadratic and Spectral Elements in Two Dimensions. Applications in Mechanics. Viscous Flow. Finite and Spectral Element Methods in Three Dimensions. Appendices. References. Index.

  6. Stacked switchable element and diode combination with a low breakdown switchable element

    Science.gov (United States)

    Wang, Qi [Littleton, CO; Ward, James Scott [Englewood, CO; Hu, Jian [Englewood, CO; Branz, Howard M [Boulder, CO

    2012-06-19

    A device (10) comprises a semiconductor diode (12) and a switchable element (14) positioned in stacked adjacent relationship. The semiconductor diode (12) and the switchable element (14) are electrically connected in series with one another. The switchable element (14) is switchable from a low-conductance state to a high-conductance state in response to the application of a low-density forming current and/or a low voltage.

  7. Novel Tn4371-ICE like element in Ralstonia pickettii and genome mining for comparative elements.

    Science.gov (United States)

    Ryan, Michael P; Pembroke, J Tony; Adley, Catherine C

    2009-11-26

    Integrative Conjugative Elements (ICEs) are important factors in the plasticity of microbial genomes. An element related to the ICE Tn4371 was discovered during a bioinformatic search of the Ralstonia pickettii 12J genome. This element was analysed and further searches carried out for additional elements.A PCR method was designed to detect and characterise new elements of this type based on this scaffold and a culture collection of fifty-eight Ralstonia pickettii and Ralstonia insidiosa strains were analysed for the presence of the element. Comparative sequence analysis of bacterial genomes has revealed the presence of a number of uncharacterised Tn4371-like ICEs in the genomes of several beta and gamma- Proteobacteria. These elements vary in size, GC content, putative function and have a mosaic-like structure of plasmid- and phage-like sequences which is typical of Tn4371-like ICEs. These elements were found after a through search of the GenBank database. The elements, which are found in Ralstonia, Delftia, Acidovorax, Bordetella, Comamonas, Acidovorax, Congregibacter, Shewanella, Pseudomonas Stenotrophomonas, Thioalkalivibrio sp. HL-EbGR7, Polaromonas, Burkholderia and Diaphorobacter sp. share a common scaffold. A PCR method was designed (based on the Tn4371- like element detected in the Ralstonia pickettii 12J genome) to detect and characterise new elements of this type. All elements found in this study possess a common scaffold of core genes but contain different accessory genes. A new uniform nomenclature is suggested for ICEs of the Tn4371 family. Two novel Tn4371-like ICE were discovered and characterised, using the novel PCR method described in two different isolates of Ralstonia pickettii from laboratory purified water.

  8. Element quality analysis: estimating the accuracy of ephemeris predictions from orbital elements

    Science.gov (United States)

    Siegel, Alan

    1994-07-01

    Element Quality Analysis (EQA) is the evaluation of the accuracy with which an orbital element set describes the orbit of a satellite. This paper proposes practical methods for evaluating element quality and describes the benefits of improved EQA. The paper first discusses the need for and applications of EQA. Past and current operational methods for EQA are then considered. The main portion of the paper describes alternative methods for EQA.

  9. Augmented weak forms and element-by-element preconditioners: Efficient iterative strategies for structural finite elements. A preliminary study

    Science.gov (United States)

    Muller, A.; Hughes, T. J. R.

    1984-01-01

    A weak formulation in structural analysis that provides well conditioned matrices suitable for iterative solutions is presented. A mixed formulation ensures the proper representation of the problem and the constitutive relations are added in a penalized form. The problem is solved by a double conjugate gradient algorithm combined with an element by element approximate factorization procedure. The double conjugate gradient strategy resembles Uzawa's variable-length type algorithms the main difference is the presence of quadratic terms in the mixed variables. In the case of shear deformable beams these terms ensure that the proper finite thickness solution is obtained.

  10. Sparse adaptive finite elements for radiative transfer

    International Nuclear Information System (INIS)

    Widmer, G.; Hiptmair, R.; Schwab, Ch.

    2008-01-01

    The linear radiative transfer equation, a partial differential equation for the radiation intensity u(x,s), with independent variables x element of D is contained in R n in the physical domain D of dimension n=2,3, and angular variable s element of S 2 :={y element of R 3 :|y|=1}, is solved in the n+2-dimensional computational domain DxS 2 . We propose an adaptive multilevel Galerkin finite element method (FEM) for its numerical solution. Our approach is based on (a) a stabilized variational formulation of the transport operator, (b) on so-called sparse tensor products of two hierarchic families of finite element spaces in H 1 (D) and in L 2 (S 2 ), respectively, and (c) on wavelet thresholding techniques to adapt the discretization to the underlying problem. An a priori error analysis shows, under strong regularity assumptions on the solution, that the sparse tensor product method is clearly superior to a discrete ordinates method, as it converges with essentially optimal asymptotic rates while its complexity grows essentially only as that for a linear transport problem in R n . Numerical experiments for n=2 on a set of example problems agree with the convergence and complexity analysis of the method and show that introducing adaptivity can improve performance in terms of accuracy vs. number of degrees even further

  11. Method for inspecting nuclear reactor fuel elements

    International Nuclear Information System (INIS)

    Jabsen, F.S.

    1979-01-01

    A technique for disassembling a nuclear reactor fuel element without destroying the individual fuel pins and other structural components from which the element is assembled is described. A traveling bridge and trolley span a water-filled spent fuel storage pool and support a strongback. The strongback is under water and provides a working surface on which the spent fuel element is placed for inspection and for the manipulation that is associated with disassembly and assembly. To remove, in a non-destructive manner, the grids that hold the fuel pins in the proper relative positions within the element, bars are inserted through apertures in the grids with the aid of special tools. These bars are rotated to flex the adjacent grid walls and, in this way relax the physical engagement between protruding portions of the grid walls and the associated fuel pins. With the grid structure so flexed to relax the physical grip on the individual fuel pins, these pins can be withdrawn for inspection or replacement as necessary without imposing a need to destroy fuel element components

  12. Trace elements in glucometabolic disorders: an update

    Directory of Open Access Journals (Sweden)

    Wiernsperger Nicolas

    2010-12-01

    Full Text Available Abstract Many trace elements, among which metals, are indispensable for proper functioning of a myriad of biochemical reactions, more particularly as enzyme cofactors. This is particularly true for the vast set of processes involved in regulation of glucose homeostasis, being it in glucose metabolism itself or in hormonal control, especially insulin. The role and importance of trace elements such as chromium, zinc, selenium, lithium and vanadium are much less evident and subjected to chronic debate. This review updates our actual knowledge concerning these five trace elements. A careful survey of the literature shows that while theoretical postulates from some key roles of these elements had led to real hopes for therapy of insulin resistance and diabetes, the limited experience based on available data indicates that beneficial effects and use of most of them are subjected to caution, given the narrow window between safe and unsafe doses. Clear therapeutic benefit in these pathologies is presently doubtful but some data indicate that these metals may have a clinical interest in patients presenting deficiencies in individual metal levels. The same holds true for an association of some trace elements such as chromium or zinc with oral antidiabetics. However, this area is essentially unexplored in adequate clinical trials, which are worth being performed.

  13. Deletion of ultraconserved elements yields viable mice

    Energy Technology Data Exchange (ETDEWEB)

    Ahituv, Nadav; Zhu, Yiwen; Visel, Axel; Holt, Amy; Afzal, Veena; Pennacchio, Len A.; Rubin, Edward M.

    2007-07-15

    Ultraconserved elements have been suggested to retainextended perfect sequence identity between the human, mouse, and ratgenomes due to essential functional properties. To investigate thenecessities of these elements in vivo, we removed four non-codingultraconserved elements (ranging in length from 222 to 731 base pairs)from the mouse genome. To maximize the likelihood of observing aphenotype, we chose to delete elements that function as enhancers in amouse transgenic assay and that are near genes that exhibit markedphenotypes both when completely inactivated in the mouse as well as whentheir expression is altered due to other genomic modifications.Remarkably, all four resulting lines of mice lacking these ultraconservedelements were viable and fertile, and failed to reveal any criticalabnormalities when assayed for a variety of phenotypes including growth,longevity, pathology and metabolism. In addition more targeted screens,informed by the abnormalities observed in mice where genes in proximityto the investigated elements had been altered, also failed to revealnotable abnormalities. These results, while not inclusive of all thepossible phenotypic impact of the deleted sequences, indicate thatextreme sequence constraint does not necessarily reflect crucialfunctions required for viability.

  14. Biological toxicity of lanthanide elements on algae.

    Science.gov (United States)

    Tai, Peidong; Zhao, Qing; Su, Dan; Li, Peijun; Stagnitti, Frank

    2010-08-01

    The biological toxicity of lanthanides on marine monocellular algae was investigated. The specific objective of this research was to establish the relationship between the abundance in the seawater of lanthanides and their biological toxicities on marine monocellular algae. The results showed that all single lanthanides had similar toxic effects on Skeletonema costatum. High concentrations of lanthanides (29.04+/-0.61 micromol L(-1)) resulted in 50% reduction in growth of algae compared to the controls (0 micromol L(-1)) after 96 h (96 h-EC50). The biological toxicity of 13 lanthanides on marine monocellular algae was unrelated with the abundance of different lanthanide elements in nature, and the "Harkins rule" was not appropriate for the lanthanides. A mixed solution that contained equivalent concentrations of each lanthanide element had the same inhibition effect on algae cells as each individual lanthanide element at the same total concentration. This phenomenon is unique compared to the groups of other elements in the periodic table. Hence, we speculate that the monocellular organisms might not be able to sufficiently differentiate between the almost chemically identical lanthanide elements. Copyright (c) 2010 Elsevier Ltd. All rights reserved.

  15. Writing analytic element programs in Python.

    Science.gov (United States)

    Bakker, Mark; Kelson, Victor A

    2009-01-01

    The analytic element method is a mesh-free approach for modeling ground water flow at both the local and the regional scale. With the advent of the Python object-oriented programming language, it has become relatively easy to write analytic element programs. In this article, an introduction is given of the basic principles of the analytic element method and of the Python programming language. A simple, yet flexible, object-oriented design is presented for analytic element codes using multiple inheritance. New types of analytic elements may be added without the need for any changes in the existing part of the code. The presented code may be used to model flow to wells (with either a specified discharge or drawdown) and streams (with a specified head). The code may be extended by any hydrogeologist with a healthy appetite for writing computer code to solve more complicated ground water flow problems. Copyright © 2009 The Author(s). Journal Compilation © 2009 National Ground Water Association.

  16. Transposable elements in the Anopheles funestus transcriptome.

    Science.gov (United States)

    Fernández-Medina, Rita D; Carareto, Claudia M A; Struchiner, Cláudio J; Ribeiro, José M C

    2017-06-01

    Transposable elements (TEs) are present in most of the eukaryotic genomes and their impact on genome evolution is increasingly recognized. Although there is extensive information on the TEs present in several eukaryotic genomes, less is known about the expression of these elements at the transcriptome level. Here we present a detailed analysis regarding the expression of TEs in Anopheles funestus, the second most important vector of human malaria in Africa. Several transcriptionally active TE families belonging both to Class I and II were identified and characterized. Interestingly, we have identified a full-length putative active element (including the presence of full length TIRs in the genomic sequence) belonging to the hAT superfamily, which presents active members in other insect genomes. This work contributes to a comprehensive understanding of the landscape of transposable elements in A. funestus transcriptome. Our results reveal that TEs are abundant and diverse in the mosquito and that most of the TE families found in the genome are represented in the mosquito transcriptome, a fact that could indicate activity of these elements.The vast diversity of TEs expressed in A. funestus suggests that there is ongoing amplification of several families in this organism.

  17. The Heavy Element Volatility Instrument (HEVI)

    International Nuclear Information System (INIS)

    Kadkhodayan, B.; Tuerler, A.; Gregorich, K.E.; Nurmia, M.J.; Lee, D.M.; Hoffman, D.C.

    1992-01-01

    The practical investigation of the chemical properties of the transactinide elements is extremely difficult. These elements can only be produced in heavy ion fusion reactions at rates of a few atoms per minute or less. The longest lived known isotopes of these elements have half-lives of one minute or less, which further complicates chemical studies. Gas phase chemistry is one of the most unique chemical procedures designed to investigate the properties of these elements. This method takes advantage of the different volatilities of actinide and transactinide halides and their lighter homologs. The authors have constructed the Heavy Element Volatility Instrument (HEVI), an on-line gas chromatography system which is used to continuously separate halides according to their volatilities. Both gaseous HBr and HCl have been used as halogenating agents. The apparatus is described and some preliminary results are given. Calculated results from a Monte Carlo computer program, based on a simplified microscopic model for gas chromatography in open columns, agree quite well with the results obtained

  18. Trace elements in termites by PIXE analysis

    Energy Technology Data Exchange (ETDEWEB)

    Yoshimura, T. E-mail: tsuyoshi@termite.kuwri.kyoto-u.ac.jp; Kagemori, N.; Kawai, S.; Sera, K.; Futatsugawa, S

    2002-04-01

    Trace elements in a Japanese subterranean xylophagous termite, Coptotermes formosanus Shiraki, were analyzed by the PIXE method. The total amount of the 14 predominant elements out of 27 detected in an intact termite was higher in a soldier termite (23 000 {mu}g/g) than in a worker termite (10 000 {mu}g/g). A block of wood (Pinus densiflora Sieb. et Zucc.) for termite feed had a much lower concentration (3600 {mu}g/g) compared with that in an intact termite. This probably relates the functional bio-condensation and/or bio-recycling of trace elements in C. formosanus. When a termite was separated into three anatomical parts, head, degutted body and gut, the worker gut contained the highest total amount of the 14 predominant measured elements (31 000 {mu}g/g). This might be correlated with the higher activity of food digestion and energy production in the worker gut. Moreover, the mandible of the soldier head, with an exoskeleton that is intensely hardened, showed a preferential distribution of Mn and Fe. These results suggest that the characteristic localization of elements will be closely related to the functional role of the individual anatomical part of C. formosanus.

  19. Repetitive Elements in Mycoplasma hyopneumoniae Transcriptional Regulation.

    Directory of Open Access Journals (Sweden)

    Amanda Malvessi Cattani

    Full Text Available Transcriptional regulation, a multiple-step process, is still poorly understood in the important pig pathogen Mycoplasma hyopneumoniae. Basic motifs like promoters and terminators have already been described, but no other cis-regulatory elements have been found. DNA repeat sequences have been shown to be an interesting potential source of cis-regulatory elements. In this work, a genome-wide search for tandem and palindromic repetitive elements was performed in the intergenic regions of all coding sequences from M. hyopneumoniae strain 7448. Computational analysis demonstrated the presence of 144 tandem repeats and 1,171 palindromic elements. The DNA repeat sequences were distributed within the 5' upstream regions of 86% of transcriptional units of M. hyopneumoniae strain 7448. Comparative analysis between distinct repetitive sequences found in related mycoplasma genomes demonstrated different percentages of conservation among pathogenic and nonpathogenic strains. qPCR assays revealed differential expression among genes showing variable numbers of repetitive elements. In addition, repeats found in 206 genes already described to be differentially regulated under different culture conditions of M. hyopneumoniae strain 232 showed almost 80% conservation in relation to M. hyopneumoniae strain 7448 repeats. Altogether, these findings suggest a potential regulatory role of tandem and palindromic DNA repeats in the M. hyopneumoniae transcriptional profile.

  20. Repetitive Elements in Mycoplasma hyopneumoniae Transcriptional Regulation.

    Science.gov (United States)

    Cattani, Amanda Malvessi; Siqueira, Franciele Maboni; Guedes, Rafael Lucas Muniz; Schrank, Irene Silveira

    2016-01-01

    Transcriptional regulation, a multiple-step process, is still poorly understood in the important pig pathogen Mycoplasma hyopneumoniae. Basic motifs like promoters and terminators have already been described, but no other cis-regulatory elements have been found. DNA repeat sequences have been shown to be an interesting potential source of cis-regulatory elements. In this work, a genome-wide search for tandem and palindromic repetitive elements was performed in the intergenic regions of all coding sequences from M. hyopneumoniae strain 7448. Computational analysis demonstrated the presence of 144 tandem repeats and 1,171 palindromic elements. The DNA repeat sequences were distributed within the 5' upstream regions of 86% of transcriptional units of M. hyopneumoniae strain 7448. Comparative analysis between distinct repetitive sequences found in related mycoplasma genomes demonstrated different percentages of conservation among pathogenic and nonpathogenic strains. qPCR assays revealed differential expression among genes showing variable numbers of repetitive elements. In addition, repeats found in 206 genes already described to be differentially regulated under different culture conditions of M. hyopneumoniae strain 232 showed almost 80% conservation in relation to M. hyopneumoniae strain 7448 repeats. Altogether, these findings suggest a potential regulatory role of tandem and palindromic DNA repeats in the M. hyopneumoniae transcriptional profile.

  1. Concentration of trace elements in marine organisms

    International Nuclear Information System (INIS)

    Ishii, Takaaki; Suzuki, Hamaji; Iimura, Mitsue; Koyanagi, Taku

    1976-01-01

    Information on the quality and quantity of stable trace elements in marine environments is frequently required to analyze the radioecological behavior of radionuclides released from nuclear facilities into the sea. In the present work, special attention was concentrated in determination of stable Mn, Fe, Co, Zn, Rb and Cs in marine organisms to estimate the concentration factors for these elements and corresponding radionuclides. Marine organisms (fishes, marine invertebrates and seaweeds) were collected at the seashore of Ibaragi prefecture and provided for chemical analysis after dry-ashing and wet-ashing. Atomic absorption spectrophotometry and neutron activation analysis were applied to determine the concentration of elements. The concentration of stable elements in fish muscle was independent on species of the fishes though slightly higher trends were observed in ''Usumebaru'', Sebastes nivosus for Cs, ''Ishimochi'', Nibea mitsukurii for Zn and Fe compared with other species. The concentration of Co, Zn and Fe in muscle of marine invertebrates was one order of magnitude higher than fish muscles especially in shellfishes for Co. Seaweeds showed peculiar species specificity for the concentration of stable trace elements and remarkable differences was observed between the species even among the same genus. (auth.)

  2. Developments of Mindlin-Reissner Plate Elements

    Directory of Open Access Journals (Sweden)

    Song Cen

    2015-01-01

    Full Text Available Since 1960s, how to develop high-performance plate bending finite elements based on different plate theories has attracted a great deal of attention from finite element researchers, and numerous models have been successfully constructed. Among these elements, the most popular models are usually formulated by two theoretical bases: the Kirchhoff plate theory and the Mindlin-Reissener plate theory. Due to the advantages that only C0 continuity is required and the effect of transverse shear strain can be included, the latter one seems more rational and has obtained more attention. Through abundant works, different types of Mindlin-Reissener plate models emerged in many literatures and have been applied to solve various engineering problems. However, it also brings FEM users a puzzle of how to choose a “right” one. The main purpose of this paper is to present an overview of the development history of the Mindlin-Reissner plate elements, exhibiting the state-of-art in this research field. At the end of the paper, a promising method for developing “shape-free” plate elements is recommended.

  3. Fundamental aspects of nuclear reactor fuel elements

    International Nuclear Information System (INIS)

    Olander, D.R.

    1976-01-01

    The book presented is designed to function both as a text for first-year graduate courses in nuclear materials and as a reference for workers involved in the materials design and performance aspects of nuclear power plants. The contents are arranged under the following chapter headings: statistical thermodynamics, thermal properties of solids, crystal structures, cohesive energy of solids, chemical equilibrium, point defects in solids, diffusion in solids, dislocations and grain boundaries, equation of state of UO 2 , fuel element thermal performance, fuel chemistry, behavior of solid fission products in oxide fuel elements, swelling due to fission gases, pore migration and fuel restructuring kinetics, fission gas release, mechanical properties of UO 2 , radiation damage, radiation effects in metals, interaction of sodium and stainless steel, modeling of the structural behavior of fuel elements and assemblies

  4. Transfer of elements into mother's milk

    International Nuclear Information System (INIS)

    Wappelhorst, O.; Kuehn, I.; Heidenreich, H.; Markert, B.

    2000-01-01

    This research project aimed to determine the factors for the transfer of the elements silver (Ag), cerium (Ce), cobalt (Co), chrome (Cr), gallium (Ga), lanthanum (La), molybdenum (Mo), niobium (Nb), radium (Ra), ruthenium (Ru), antimony (sb), thorium (Th), titanium (Ti) and uranium (U) from food into the mother's milk. This factors will be used as a basic to check and derive activity values for the contamination of food and for radiation protection at working places of suckling women. For this purpose 19 mothers collected samples daily (2-8 weeks), using the duplicate method, of all the food they consumed as well as of their milk. After microwave-assisted digestion the element contents were analysed by mass-spectroscopy with inductive coupled plasma (ICP-MS). The results of the mothers who participate for more than 5 weeks were used to make a time lapse between the intake and transfer of the elements in the mothers milk visible. (orig.) [de

  5. Transposable Elements: No More 'Junk DNA'

    Directory of Open Access Journals (Sweden)

    Yun-Ji Kim

    2012-12-01

    Full Text Available Since the advent of whole-genome sequencing, transposable elements (TEs, just thought to be 'junk' DNA, have been noticed because of their numerous copies in various eukaryotic genomes. Many studies about TEs have been conducted to discover their functions in their host genomes. Based on the results of those studies, it has been generally accepted that they have a function to cause genomic and genetic variations. However, their infinite functions are not fully elucidated. Through various mechanisms, including de novo TE insertions, TE insertion-mediated deletions, and recombination events, they manipulate their host genomes. In this review, we focus on Alu, L1, human endogenous retrovirus, and short interspersed element/variable number of tandem repeats/Alu (SVA elements and discuss how they have affected primate genomes, especially the human and chimpanzee genomes, since their divergence.

  6. Using reciprocity in Boundary Element Calculations

    DEFF Research Database (Denmark)

    Juhl, Peter Møller; Cutanda Henriquez, Vicente

    2010-01-01

    The concept of reciprocity is widely used in both theoretical and experimental work. In Boundary Element calculations reciprocity is sometimes employed in the solution of computationally expensive scattering problems, which sometimes can be more efficiently dealt with when formulated as the recip......The concept of reciprocity is widely used in both theoretical and experimental work. In Boundary Element calculations reciprocity is sometimes employed in the solution of computationally expensive scattering problems, which sometimes can be more efficiently dealt with when formulated...... as the reciprocal radiation problem. The present paper concerns the situation of having a point source (which is reciprocal to a point receiver) at or near a discretized boundary element surface. The accuracy of the original and the reciprocal problem is compared in a test case for which an analytical solution...

  7. Separation and spectrophotometric determination of elements

    International Nuclear Information System (INIS)

    Marczenko, Z.

    1986-01-01

    This book is a useful text intended as a reference for the laboratory that is either involved in spectrophotometric analysis or requires separations prior to analysis by any method. It attempts to cover a diverse series of topics in fewer than 700 pages. Part I of the book covers general topics such as separation schemes (solvent extraction, precipitation, volatility, ion exchange), principles and instrumentation used for spectrophotometry, and color reagents in only 119 pages. Entire books have been written on each of those subjects. The author must therefore resort to extensive referencing to cover each subject adequately. Part II, Methods for Separation and Determination of Individual Elements, discusses all elements - both nonmetals and metals and major procedures for the separation and spectrophotometric determination of each element are adequately covered

  8. Elemental bioaccumulators in air pollution studies

    International Nuclear Information System (INIS)

    Freitas, M.C.

    1995-01-01

    K 0 -Based instrumental neutron activation analysis (k 0 INAA) was used to determine the concentrations of Cr, Fe, Co, Zn, Se, Sb and Hg in the vascular plants Cistus salvifolius and Inula viscosa and in the lichen Parmelia sulcata. The samples were collected in the neighbourhood of industrial complexes. The elemental accumulation in the vascular plants and the lichen are compared to optimize the choice of the bioaccumulator. It is concluded that P.sulcata seems to be the best accumulator of the three species for the element studied; Cistus salvifolius is sensitive to the contents of Zn, Fe, Cr and Sb in the air; Inula viscosa seems to accumulate Fe, Sb, Co, Cr and Zn. Nevertheless, it is concluded that lichen is a good air pollution indicator, while the vascular plants are not due to the large seasonal variations found in the elemental concentrations. (author) 11 refs.; 7 figs.; 2 tabs

  9. Trace element changes in cardiovascular diseases

    Science.gov (United States)

    Pinheiro, T.; Fernandes, R.; Maenhaut, W.; Hebbrecht, G.; Wätjen, U.; Halpern, M. J.

    1993-04-01

    Artery samples and five different brain structures originating from both atherosclerosis affected and healthy Portuguese individuals were examined for their elemental content. Particle-induced X-ray emission (PIXE) was used to determine K, Ca, Mn, Fe, Cu, Zn, Se and Rb in all the tissues studied. The most prominent differences between the pathological and reference data were those for Mn, Fe, Cu and Zn in the nucleus caudatus, putamen and substantia nigra brain regions. In the arteries a significant increase in Ca and Mn content was observed, whereas the K and Fe content declined. The decreased K and Rb content in the five brain structures from the pathological group and the changes for Mn in the nucleus caudatus, putamen and substantia nigra regions can be associated with aging. However, age cannot explain the other trace element alterations, e.g., for Fe, Cu and Zn. Most likely, the changes for these elements are due to atherosclerosis progression.

  10. Light element thermodynamics related to actinide separations

    International Nuclear Information System (INIS)

    Johnson, I.; Johnson, C.E.

    1997-01-01

    The accumulation of waste from the last five decades of nuclear reactor development has resulted in large quantities of materials of very diverse chemical composition. An electrometallurgical (EM) method is being developed to separate the components of the waste into several unique streams suitable for permanent disposal and an actinide stream suitable for retrievable storage. The principal types of nuclear wastes are spent oxide or metallic fuel. Since the EM module requires a metallic feed, and oxygen interferes with its operation, the oxide fuel has to be reduced prior to EM treatment. Further, the wastes contain, in addition to oxygen, other light elements (first- and second-row elements) that may also interfere with the operation of the EM module. The extent that these light elements interfere with the operation of the EM module has been determined by chemical thermodynamic calculations. (orig.)

  11. An automated fuel element scanning system

    International Nuclear Information System (INIS)

    Robinson, L.; Hobbs, R.W.; Dyer, F.F.; Pugh, L.P.; Teasley, N.A. Jr.; Snelgrove, J.L.

    1988-01-01

    This paper describes an automated fuel element scanning system, based upon gamma-ray spectroscopy, that has been developed at the Oak Ridge Research Reactor. The scanning system is located in the reactor pool and allows fuel elements to be scanned nondestructively at various intervals during their core life. Gamma-ray measurements are made using a GeLi detector positioned above the pool water. Measurements of 137 Cs count rates from relatively 'cold' elements indicate that the counting data obtained using this apparatus is reproducible within 5%. Power distribution in the reactor's core is derived from 140 La counting data. The method of determining power is discussed briefly and some example results are presented. (author) 11 refs.; 7 figs.; 4 tabs

  12. Chemical element abundance in K giant atmospheres

    International Nuclear Information System (INIS)

    Komarov, N.S.; Shcherbak, A.N.

    1980-01-01

    With the help of modified method of differential curves of growth studied are physical parameters of atmospheres of giant stars of KO111 spectral class of the NGC 752, M25 and UMa cluster. Observations have been made on reflector of Crimea astrophysical observatory of Academy of Sciences of the USSR in the period from February to May, 1978. Spectograms are obtained for the wave length range from 5000-5500 A. It is shown that the change of chemical content in the wide range in heavy element composition does not influence the star atmosphere structUre. It follows from the results of the investigation that the abundance of chemical elements in stars of various scattered clusters, is the same in the range of errors of measurements and is similar to the abundance of chemical elements in the Sun atmosphere

  13. CHARACTERISTIC OF THE COMPLEX MARKETING COMMUNICATIONS ELEMENTS

    Directory of Open Access Journals (Sweden)

    Natalia Kovalenko

    2017-07-01

    Full Text Available Purpose: The purpose and objectives of the article are detailed characterization of marketing communication’s elements and characteristics of synthetic and communications. Methods: The stages of the campaign and main advantages and disadvantages of advertising have been disclosed and analyzed in the article. The marketing communication and some elements of marketing communications, the issues of formation and development of the theory of marketing communications have been studied. Results: This article describes the elements of marketing communications factors and basic tools of marketing communications: advertising, personal selling, complex sales promotion, publicity and public relation, direct marketing. Discussion: Companies must also transmit information to customers and carefully carry out selection of such information. For this order is a complex system of marketing communications. Often marketing communications identified with the products promotion which leads to a false understanding of the nature and, consequently, to the irrational use potential of marketing communications in market activity.

  14. Geometrically unfitted finite element methods and applications

    CERN Document Server

    Burman, Erik; Larson, Mats; Olshanskii, Maxim

    2017-01-01

    This book provides a snapshot of the state of the art of the rapidly evolving field of integration of geometric data in finite element computations. The contributions to this volume, based on research presented at the UCL workshop on the topic in January 2016, include three review papers on core topics such as fictitious domain methods for elasticity, trace finite element methods for partial differential equations defined on surfaces, and Nitsche’s method for contact problems. Five chapters present original research articles on related theoretical topics, including Lagrange multiplier methods, interface problems, bulk-surface coupling, and approximation of partial differential equations on moving domains. Finally, two chapters discuss advanced applications such as crack propagation or flow in fractured poroelastic media. This is the first volume that provides a comprehensive overview of the field of unfitted finite element methods, including recent techniques such as cutFEM, traceFEM, ghost penalty, and aug...

  15. Nanoscience and nanotechnology of f elements

    International Nuclear Information System (INIS)

    Felinto, Maria Claudia F.C.; Brito, Hermi F.

    2005-01-01

    Medicaments that are carried via blood flow to sick organs; an electronic equipment capable of evaluating quality of beverages twice more sensitive than the human palate; magnets inside plastic micro-spheres that could help remove oil stains from the sea. Products that seem to have been taken from science fiction films, things that could never be part of our grandfather's imagination, they are actually the marvels of one more technological revolution: the nanotechnology. In this context, lanthanides and actinides elements play a fundamental role due to their singular chemical and physical properties. They appear as fundamental materials in a large range of areas such as, new materials applied to fuel element, sensors, electronics, drugs and markers (radio isotope), probes etc. The aim of this work is to review the chemistry and physics properties of these elements approaching this new technology point of view, emphasizing their nuclear applications. (author)

  16. Nuclear power: Health implications of transuranium elements

    International Nuclear Information System (INIS)

    1982-01-01

    This report provides general guidelines for national public health and environmental authorities. It does not provide detailed technical data, but instead broadly surveys the whole field, indicating the present position as assessed by members of the Working Group. The Working Group considered three major facets: physiological, toxicological and dosimetric aspects of the transuranium elements; the application of occupational health control, including health physics; and environmental behaviour together with public health implications associated with the transuranium elements. The intention was to cover all aspects relevant to health, with respect both to those who are occupationally engaged in work with such elements and to the general public who might be affected as the result of such operations. Consideration was also given to routine and emergency situations

  17. Fractional Order Element Based Impedance Matching

    KAUST Repository

    Radwan, Ahmed Gomaa

    2014-06-24

    Disclosed are various embodiments of methods and systems related to fractional order element based impedance matching. In one embodiment, a method includes aligning a traditional Smith chart (|.alpha.|=1) with a fractional order Smith chart (|.alpha.|.noteq.1). A load impedance is located on the traditional Smith chart and projected onto the fractional order Smith chart. A fractional order matching element is determined by transitioning along a matching circle of the fractional order Smith chart based at least in part upon characteristic line impedance. In another embodiment, a system includes a fractional order impedance matching application executed in a computing device. The fractional order impedance matching application includes logic that obtains a first set of Smith chart coordinates at a first order, determines a second set of Smith chart coordinates at a second order, and determines a fractional order matching element from the second set of Smith chart coordinates.

  18. Matrix elements from moments of correlation functions

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Chia Cheng [SLAC National Accelerator Lab., Menlo Park, CA (United States); Bouchard, Chris [College of William and Mary, Williamsburg, VA (United States); Orginos, Konstantinos [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); College of William and Mary, Williamsburg, VA (United States); Richards, David G. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States)

    2016-10-01

    Momentum-space derivatives of matrix elements can be related to their coordinate-space moments through the Fourier transform. We derive these expressions as a function of momentum transfer Q2 for asymptotic in/out states consisting of a single hadron. We calculate corrections to the finite volume moments by studying the spatial dependence of the lattice correlation functions. This method permits the computation of not only the values of matrix elements at momenta accessible on the lattice, but also the momentum-space derivatives, providing {\\it a priori} information about the Q2 dependence of form factors. As a specific application we use the method, at a single lattice spacing and with unphysically heavy quarks, to directly obtain the slope of the isovector form factor at various Q2, whence the isovector charge radius. The method has potential application in the calculation of any hadronic matrix element with momentum transfer, including those relevant to hadronic weak decays.

  19. Fundamental aspects of nuclear reactor fuel elements

    Energy Technology Data Exchange (ETDEWEB)

    Olander, D.R.

    1976-01-01

    The book presented is designed to function both as a text for first-year graduate courses in nuclear materials and as a reference for workers involved in the materials design and performance aspects of nuclear power plants. The contents are arranged under the following chapter headings: statistical thermodynamics, thermal properties of solids, crystal structures, cohesive energy of solids, chemical equilibrium, point defects in solids, diffusion in solids, dislocations and grain boundaries, equation of state of UO/sub 2/, fuel element thermal performance, fuel chemistry, behavior of solid fission products in oxide fuel elements, swelling due to fission gases, pore migration and fuel restructuring kinetics, fission gas release, mechanical properties of UO/sub 2/, radiation damage, radiation effects in metals, interaction of sodium and stainless steel, modeling of the structural behavior of fuel elements and assemblies. (DG)

  20. Diffractive optical elements written by photodeposition

    Energy Technology Data Exchange (ETDEWEB)

    Baal-Zedaka, I.; Hava, S.; Mirchin, N.; Margolin, R.; Zagon, M.; Lapsker, I.; Azoulay, J.; Peled, A

    2003-03-15

    In this work direct laser writing of diffractive optical elements (DOE) by photodeposition (PD) of amorphous selenium (a-Se) from colloid solutions has been investigated. We used a computer controlled laser scanner for patterning thin film micro-profiles creating thus planar optical elements by direct beam writing on surfaces immersed in a liquid phase PD cell. The laser employed was an argon ion laser at 488 nm wavelength, with powers up to 55 mW, for writing typically 25-250 {mu}m wide lines of 200 nm thickness at rates of about 150 {mu}m/s. Various elements made of photodeposited thin films on polymethyl-methacrylate (PMMA) substrates were produced for prototyping microlenses, linear grating arrays, cylindrical and circular profiled DOE patterns.

  1. Frontiers of heavy element nuclear and radiochemistry

    International Nuclear Information System (INIS)

    Hoffman, D.C.

    1999-01-01

    The production and half-lives of the heaviest chemical elements, now known through Z=112, are reviewed. Recent experimental evidence for the stabilization of heavy element isotopes due to proximity to deformed nuclear shells at Z=108 and N=162 is compared with the theoretical predictions. The possible existence of isotopes of elements 107-110 with half-lives of seconds or longer, and production reactions and experimental techniques for increasing the overall yields of such isotopes in order to study both their nuclear and chemical properties are discussed. The present status of studies of the chemical properties of Rf, Ha, and Sg is briefly summarized and prospects for extending chemical studies beyond Sg are considered. (author)

  2. Utilization of Large Cohesive Interface Elements for Delamination Simulation

    DEFF Research Database (Denmark)

    Bak, Brian Lau Verndal; Lund, Erik

    2012-01-01

    This paper describes the difficulties of utilizing large interface elements in delamination simulation. Solutions to increase the size of applicable interface elements are described and cover numerical integration of the element and modifications of the cohesive law....

  3. Energy efficiency of electrical infrared heating elements

    International Nuclear Information System (INIS)

    Brown, K.J.; Farrelly, R.; O’Shaughnessy, S.M.; Robinson, A.J.

    2016-01-01

    Highlights: • Characterization of the radiant energy efficiency of infrared heating elements. • Performed for a commercially available ceramic heater element for two cases. • Total radiant power and net radiant efficiency is computed. • Radiant efficiencies are strongly dependant on the input power to the element. • In-plane efficiencies depend on the distance from the heater. - Abstract: A measurement system has been designed to characterize the radiant energy efficiency of infrared heating elements. The system also allows for measurement of the radiant heat flux distribution emitted from radiant heater assemblies. To facilitate these, a 6-axis robotic arm is fitted with a Schmidt–Boelter radiant heat flux gauge. A LabVIEW interface operates the robot and positions the sensor in the desired location and subsequently acquires the desired radiant heat flux measurement. To illustrate the functionality of the measurement system and methodology, radiant heat flux distributions and efficiency calculations are performed for a commercially available ceramic heater element for two cases. In the first, a spherical surface is traced around the entire heater assembly and the total radiant power and net radiant efficiency is computed. In the second, 50 cm × 50 cm vertical planes are traced parallel to the front face of the heater assembly at distances between 10 cm and 50 cm and the in-plane power and efficiencies are computed. The results indicate that the radiant efficiencies are strongly dependant on the input power to the element and, for the in-plane efficiencies, depend on the distance from the heater.

  4. INCIDENCE OF FUNGAL ELEMENTS IN SINONASAL POLYPOSIS

    Directory of Open Access Journals (Sweden)

    Santhosh G. S

    2016-12-01

    Full Text Available BACKGROUND Nasal polyposis is a disease entity characterised by formation of pseudoedema of sinonasal mucus membrane progressing to form polyps. It presents clinically with nasal obstruction and fleshy masses in the nasal cavity. The nasal mucosa reacts to formation of polypi in allergic fungal sinusitis also. The present study is an attempt to demonstrate possible fungal elements from the polypi removed during surgery by KOH study and HPE study. The aim of the study is to find out the incidence of fungal elements in sinonasal polyposis. MATERIALS AND METHODS 50 patients attending the ENT OPD for nasal obstruction and showing polypi on anterior rhinoscopy were selected. All the patients were subjected to surgery and specimens collected were subjected to KOH study and histopathology to demonstrate fungal elements. RESULTS Among 50 patients, the age range was from 9-57 years; mean age- 36.46 years. The male-to-female ratio was 1.5:1. Deviated nasal septum was found in 38% of patients. Among the unilateral cases, 47% were antrochoanal polyps and 53% were ethmoid polyps. Out of 50 patients, only 3 specimens were positive for fungal elements with KOH study and only 2 cases with fungal culture. Thus, the incidence of fungal elements in sinonasal polyposis was 6%. CONCLUSION The incidence of fungal elements in sinonasal polyposis was 6%. Histopathological examination of polypectomy specimen was negative for invasive fungal disease and showed inflammatory changes only. There is no difference in the detection of the presence of fungal by two methods.

  5. Visualizing higher order finite elements. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Thompson, David C; Pebay, Philippe Pierre

    2005-11-01

    This report contains an algorithm for decomposing higher-order finite elements into regions appropriate for isosurfacing and proves the conditions under which the algorithm will terminate. Finite elements are used to create piecewise polynomial approximants to the solution of partial differential equations for which no analytical solution exists. These polynomials represent fields such as pressure, stress, and momentum. In the past, these polynomials have been linear in each parametric coordinate. Each polynomial coefficient must be uniquely determined by a simulation, and these coefficients are called degrees of freedom. When there are not enough degrees of freedom, simulations will typically fail to produce a valid approximation to the solution. Recent work has shown that increasing the number of degrees of freedom by increasing the order of the polynomial approximation (instead of increasing the number of finite elements, each of which has its own set of coefficients) can allow some types of simulations to produce a valid approximation with many fewer degrees of freedom than increasing the number of finite elements alone. However, once the simulation has determined the values of all the coefficients in a higher-order approximant, tools do not exist for visual inspection of the solution. This report focuses on a technique for the visual inspection of higher-order finite element simulation results based on decomposing each finite element into simplicial regions where existing visualization algorithms such as isosurfacing will work. The requirements of the isosurfacing algorithm are enumerated and related to the places where the partial derivatives of the polynomial become zero. The original isosurfacing algorithm is then applied to each of these regions in turn.

  6. Actinide elements in aquatic and terrestrial environments

    International Nuclear Information System (INIS)

    Bondietti, E.A.; Bogle, M.A.; Brantley, J.N.

    1979-01-01

    Progress is reported on the following research projects: water-sediment interactions of U, Pu, Am, and Cm; relative availability of actinide elements from abiotic to aquatic biota; comparative uptake of transuranic elements by biota bordering Pond 3513; metabolic reduction of 239 Np from Np(V) to Np(IV) in cotton rats; evaluation of hazards associated with transuranium releases to the biosphere; predicting Pu in bone; adsorption--solubility--complexation phenomena in actinide partitioning between sorbents and solution; comparative soil extraction data; and comparative plant uptake data

  7. Dietary patterns and trace elements intake evaluation

    International Nuclear Information System (INIS)

    Rahman, A.; Waheed, S.; Zaidi, J.H.; Ahmad, S.

    1998-01-01

    The dietary patterns and trace element contents of the integrated diets of middle income population in Gujranwala and of Islamabad have been studied and dietary intake of winter and summer are given. An overview of the elemental concentration in the two sets of integrated diets reveals similar zinc and manganese concentrations; comparatively higher nickel, selenium and potassium concentrations in Gujranwala and higher chromium, cesium, scandium, sodium and chlorine concentrations in Islamabad. These results undoubtedly reflect the difference in food selection and habits of the two populations, the influence of soil content and industrial pollution

  8. Comparative evaluation of trace elements in blood

    International Nuclear Information System (INIS)

    Goeij, J.J.M. de; Tjioe, P.S.; Pries, C.; Zwiers, J.H.L.

    1976-01-01

    The Interuniversitair Reactor Instituut and the Centraal Laboratorium TNO have carried out a common investigation on neutron-activation-analytical procedures for the determination of trace elements in blood. A comparative evaluation of five methods, destructive as well as non-destructive, is given. The sensitivity and reproducibility of the procedures are discussed. By combining some of the methods it is possible, starting with 1 ml blood, to give quantitative information on 14 important trace elements: antimony, arsenic, bromine, cadmium, cobalt, gold, copper, mercury, molybdenum, nickel, rubidium, selenium, iron and zinc. The methods have also been applied to sodium, chromium and potassium

  9. Hybrid natural element method for viscoelasticity problems

    Science.gov (United States)

    Zhou, Yan-Kai; Ma, Yong-Qi; Dong, Yi; Feng, Wei

    2015-01-01

    A hybrid natural element method (HNEM) for two-dimensional viscoelasticity problems under the creep condition is proposed. The natural neighbor interpolation is used as the test function, and the discrete equation system of the HNEM for viscoelasticity problems is obtained using the Hellinger-Reissner variational principle. In contrast to the natural element method (NEM), the HNEM can directly obtain the nodal stresses, which have higher precisions than those obtained using the moving least-square (MLS) approximation. Some numerical examples are given to demonstrate the validity and superiority of this HNEM. Project supported by the Natural Science Foundation of Shanghai, China (Grant No.13ZR1415900).

  10. Lumped elements for RF and microwave circuits

    CERN Document Server

    Bahl, Inder

    2003-01-01

    Due to the unprecedented growth in wireless applications over the past decade, development of low-cost solutions for RF and microwave communication systems has become of great importance. This practical new book is the first comprehensive treatment of lumped elements, which are playing a critical role in the development of the circuits that make these cost-effective systems possible. The books offers you an in-depth understanding of the different types of RF and microwave circuit elements, including inductors, capacitors, resistors, transformers, via holes, airbridges, and crossovers. Support

  11. Flexible Mould for Precast Concrete Elements

    DEFF Research Database (Denmark)

    Jepsen, Christian Raun; Kristensen, Mathias Kræmmergaard; Kirkegaard, Poul Henning

    2010-01-01

    The present paper describes the development of a digitally controlled mou Id that forms a double curved and fair surface directly from the digital CAD model. The primary motivation for the development of the mould is to reduce the cost of constructing double curved, cast elements for architecture......, both in-situ cast and modular. Today, such elements are usually cast in milled formwork that is expensive and produces a lot of waste. Architects are often limited in their freedom of design by the high costs of the existing methods and as a result, the possibilities for drawing and evaluating complex...

  12. Finite elements for analysis and design

    CERN Document Server

    Akin, J E; Davenport, J H

    1994-01-01

    The finite element method (FEM) is an analysis tool for problem-solving used throughout applied mathematics, engineering, and scientific computing. Finite Elements for Analysis and Design provides a thoroughlyrevised and up-to-date account of this important tool and its numerous applications, with added emphasis on basic theory. Numerous worked examples are included to illustrate the material.Key Features* Akin clearly explains the FEM, a numerical analysis tool for problem-solving throughout applied mathematics, engineering and scientific computing* Basic theory has bee

  13. Spectroscopy of element 115 decay chains.

    Science.gov (United States)

    Rudolph, D; Forsberg, U; Golubev, P; Sarmiento, L G; Yakushev, A; Andersson, L-L; Di Nitto, A; Düllmann, Ch E; Gates, J M; Gregorich, K E; Gross, C J; Heßberger, F P; Herzberg, R-D; Khuyagbaatar, J; Kratz, J V; Rykaczewski, K; Schädel, M; Åberg, S; Ackermann, D; Block, M; Brand, H; Carlsson, B G; Cox, D; Derkx, X; Eberhardt, K; Even, J; Fahlander, C; Gerl, J; Jäger, E; Kindler, B; Krier, J; Kojouharov, I; Kurz, N; Lommel, B; Mistry, A; Mokry, C; Nitsche, H; Omtvedt, J P; Papadakis, P; Ragnarsson, I; Runke, J; Schaffner, H; Schausten, B; Thörle-Pospiech, P; Torres, T; Traut, T; Trautmann, N; Türler, A; Ward, A; Ward, D E; Wiehl, N

    2013-09-13

    A high-resolution α, x-ray, and γ-ray coincidence spectroscopy experiment was conducted at the GSI Helmholtzzentrum für Schwerionenforschung. Thirty correlated α-decay chains were detected following the fusion-evaporation reaction 48Ca + 243Am. The observations are consistent with previous assignments of similar decay chains to originate from element Z=115. For the first time, precise spectroscopy allows the derivation of excitation schemes of isotopes along the decay chains starting with elements Z>112. Comprehensive Monte Carlo simulations accompany the data analysis. Nuclear structure models provide a first level interpretation.

  14. Structural elements design manual working with Eurocodes

    CERN Document Server

    Draycott, Trevor

    2009-01-01

    Structural Elements Design Manual: Working With Eurocodes is the structural engineers 'companion volume' to the four Eurocodes on the structural use of timber, concrete, masonry and steelwork. For the student at higher technician or first degree level it provides a single source of information on the behaviour and practical design of the main elements of the building structure. With plenty of worked examples and diagrams, it is a useful textbook not only for students of structural and civil engineering, but also for those on courses in related subjects such as

  15. Analyzing effective elements in agile supply chain

    Directory of Open Access Journals (Sweden)

    Babak Jamshidi Navid

    2012-01-01

    Full Text Available Agile supply chain plays an important role on having efficient production planning. There are different factors affecting the efficiency of a supply chain and the attempt of this paper is to find the most important elements in agile supply chain. The proposed model of this paper gathers decision makers' opinions and based on DEMATEL technique determines the most important items. The preliminary results of this survey indicate that we could divide the factors into four groups and two elements including automation and utilization of technical tools of relations and information play the most important roles among other factors.

  16. Elemental PIXE analysis of oolong tea

    International Nuclear Information System (INIS)

    Watanabe, M.; Ishii, K.; Matsuyama, S.

    2008-01-01

    The contamination of heavy metals in food becomes a serious problem. We analyzed oolong tea from different production areas by PIXE using very simple sample preparation and examined trace elements contained in these samples. From the results of this experiment, we could know oolong tea which analyzed in this experiment contains various minerals such as K, Ca, P, S, Cl, Fe, Mn, Cu and Cr but not toxic element of As which detection limit of PIXE was lower than the standard values given by the food hygiene law in Japan. (author)

  17. Fuel elements and safety engineering goals

    International Nuclear Information System (INIS)

    Schulten, R.; Bonnenberg, H.

    1990-01-01

    There are good prospects for silicon carbide anti-corrosion coatings on fuel elements to be realised, which opens up the chance to reduce the safety engineering requirements to the suitable design and safe performance of the ceramic fuel element. Another possibility offered is combined-cycle operation with high efficiencies, and thus good economic prospects, as with this design concept combining gas and steam turbines, air ingress due to turbine malfunction is an incident that can be managed by the system. This development will allow economically efficient operation also of nuclear power reactors with relatively small output, and hence contribute to reducing CO 2 emissions. (orig./DG) [de

  18. Razonamiento algebraico elemental: propuestas para el aula

    Directory of Open Access Journals (Sweden)

    Walter F. Castro G

    2014-09-01

    Full Text Available En este artículo se aborda el problema de la enseñanza de álgebra en la escuela primaria. Se discute lo que se entiende como “early álgebra” y se presentan varios enfoques sobre la introducción del álgebra en la escuela elemental. En correspondencia con los enfoques, se discuten tanto algunas tareas de razonamiento algebraico elemental que pueden ser implantadas en el aula, como algunas de las características algebraicas atribuidas. Finalmente, se presenta una propuesta para asignar niveles o grados de algebrización a algunas tareas.

  19. Fuel element cluster for nuclear reactors

    International Nuclear Information System (INIS)

    Anthony, A.J.; Hutchinson, J.J.

    1976-01-01

    The claim refers to the constructional design of a fuel element cluster the elements of which are held by upper and lower end plates connected to each other in upright position, the bearing being formed by a screw connection between at least one guide tube for control rods and the two end plates. The claims are directed, especially, to the connection of the parts as well as to the materials selection which are determined to a high degree by the thermal expansion coefficients. (UA) [de

  20. Elemental distribution in human femoral head

    Energy Technology Data Exchange (ETDEWEB)

    Santos, C., E-mail: catia.santos@itn.pt [Dep. Física, Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa, 2829-516 Caparica (Portugal); Centro de Física Nuclear da Universidade de Lisboa, 1649-003 Lisboa (Portugal); Campus Tecnológico e Nuclear, IST/CTN, Universidade Técnica de Lisboa E.N. 10, 2686-953 Sacavém (Portugal); Fonseca, M. [Dep. Física, Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa, 2829-516 Caparica (Portugal); Centro de Física Nuclear da Universidade de Lisboa, 1649-003 Lisboa (Portugal); Universidade Europeia|Laureate International Universities, 1500-210 Lisboa (Portugal); Corregidor, V. [Campus Tecnológico e Nuclear, IST/CTN, Universidade Técnica de Lisboa E.N. 10, 2686-953 Sacavém (Portugal); Silva, H. [Dep. Física, Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa, 2829-516 Caparica (Portugal); Centro de Física Nuclear da Universidade de Lisboa, 1649-003 Lisboa (Portugal); Campus Tecnológico e Nuclear, IST/CTN, Universidade Técnica de Lisboa E.N. 10, 2686-953 Sacavém (Portugal); Luís, H.; Jesus, A.P. [Dep. Física, Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa, 2829-516 Caparica (Portugal); Centro de Física Nuclear da Universidade de Lisboa, 1649-003 Lisboa (Portugal); and others

    2014-07-15

    Osteoporosis is the most common bone disease with severe symptoms and harmful effects on the patient quality of life. Because abnormal distribution and concentration of the major and trace elements may help to characterize the disease, ion beam analysis is applied to the study of bone samples. Proton Induced X-ray Emission and Elastic Backscattering Spectrometry are applied for qualitative and quantitative analysis of an osteoporotic bone sample, for the determination of the Ca/P ratio and analysis of the distribution of major and trace elements. The analysis was made both in trabecular and cortical bone and the results are in agreement with the information found in literature.

  1. Distribution of elements in human spinal cord

    International Nuclear Information System (INIS)

    Yukawa, Masae; Kobayashi, T.; Qiu, Y.; Kameda, N.; Ito, Y.; Otomo, E.

    1992-01-01

    The distribution of elements in human spinal cord was investigated on unfixed frozen cord material using PIXE technique. Distribution of Cu, Zn and Fe were not uniform in the cross section of the spinal cord and concentrations of these elements were higher in the anterior gray horn than in the other areas, while K and Cl distributed uniformly. The content of K changed along the spinal cord from the cervical to the lumbar level. These findings are discussed in relation to current understanding of the physiology of the spinal cord. (author)

  2. The forgotten Elements of Action Learning

    DEFF Research Database (Denmark)

    Nunez, Heilyn Camacho; Aguirre, María

    system of action learning, where you explore your values, should not be taken as a light activity. It is the essence of action learning, where the person can explore all the significant aspects of his complete development which includes these moral, ethical and spiritual aspects.......The aim of this article is to provide a discussion and description of some topics of action learning that are not so commonly discussed in the literature and that I have called ‘the forgotten elements of action learning’. Those elements are dealing with Revans’ moral, spiritual and ethical...

  3. THE MOBILITY OF CCA ELEMENTS IN SOILS

    Directory of Open Access Journals (Sweden)

    Engin Derya Gezer

    2004-11-01

    Full Text Available CCA was firstly developed in 1933 and has been extensively used to impregnate utility poles and railroad sleepers in all over the world. However, the leachate elements from CCA treated wood products may alter soil and water properties and may have some negative influence on environment and other living organisms. In this study, mobility of CCA elements in different types of soils and their reactions with soils were reviewed and summarized. Generally, the concentrations of copper, chromium and arsenic in the soil which leach out from CCA treated-utility poles decrease with the increase of soil depth and distance soil sample take from utility poles.

  4. Hydraulic modelling of the CARA Fuel element

    International Nuclear Information System (INIS)

    Brasnarof, Daniel O.; Juanico, Luis; Giorgi, M.; Ghiselli, Alberto M.; Zampach, Ruben; Fiori, Jose M.; Yedros, Pablo A.

    2004-01-01

    The CARA fuel element is been developing by the National Atomic Energy Commission for both Argentinean PHWRs. In order to keep the hydraulic restriction in their fuel channels, one of CARA's goals is to keep its similarity with both present fuel elements. In this paper is presented pressure drop test performed at a low-pressure facility (Reynolds numbers between 5x10 4 and 1,5x10 5 ) and rational base models for their spacer grid and rod assembly. Using these models, we could estimate the CARA hydraulic performance in reactor conditions that have shown to be satisfactory. (author) [es

  5. Stability and `volatility ` of element 104 oxychloride

    Energy Technology Data Exchange (ETDEWEB)

    Eichler, B.; Gaeggeler, H.W. [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

    1997-09-01

    The formation enthalpies {Delta}H{sup *} of solid and gaseous oxychlorides of element 104 from free atoms were estimated by extrapolation. Stability and volatility of these compounds are compared to those of the homologous and neighbouring elements in the periodic system. It can be supposed that in a gas adsorption chromatographic process with oxygen containing chlorinating carrier gas the transport with the carrier gas flow occurs in the chemical state 104Cl{sub 4}. Only in the absorbed state the compound 104OCl{sub 2} is formed. (author) 1 fig., 3 refs.

  6. Asteroid proper elements and secular resonances

    Science.gov (United States)

    Knezevic, Zoran; Milani, Andrea

    1992-01-01

    In a series of papers (e.g., Knezevic, 1991; Milani and Knezevic, 1990; 1991) we reported on the progress we were making in computing asteroid proper elements, both as regards their accuracy and long-term stability. Additionally, we reported on the efficiency and 'intelligence' of our software. At the same time, we studied the associated problems of resonance effects, and we introduced the new class of 'nonlinear' secular resonances; we determined the locations of these secular resonances in proper-element phase space and analyzed their impact on the asteroid family classification. Here we would like to summarize the current status of our work and possible further developments.

  7. Casimir elements of epsilon Lie algebras

    International Nuclear Information System (INIS)

    Scheunert, M.

    1982-10-01

    The classical framework for investigating the Casimir elements of a Lie algebra is generalized to the case of an epsilon Lie algebra L. We construct the standard L-module isomorphism of the epsilon-symmetric algebra of L onto its enveloping algebra and we introduce the Harish-Chandra homomorphism. In case the generators of L can be written in a canonical two-index form, we construct the associated standard sequence of Casimir elements and derive a formula for their eigenvalues in an arbitrary highest weight module. (orig.)

  8. JACKETED FUEL ELEMENTS FOR GRAPHITE MODERATED REACTORS

    Science.gov (United States)

    Szilard, L.; Wigner, E.P.; Creutz, E.C.

    1959-05-12

    Fuel elements for a heterogeneous, fluid cooled, graphite moderated reactor are described. The fuel elements are comprised of a body of natural uranium hermetically sealed in a jacket of corrosion resistant material. The jacket, which may be aluminum or some other material which is non-fissionable and of a type having a low neutron capture cross-section, acts as a barrier between the fissioning isotope and the coolant or moderator or both. The jacket minimizes the tendency of the moderator and coolant to become radioactive and/or contaminated by fission fragments from the fissioning isotope.

  9. Nodally Integrated Finite Element Formulation for Mindlin-Reissner Plates

    Science.gov (United States)

    Simoes, D. A.; Jadhav, T. A.

    2014-01-01

    This work describes a nodally integrated finite element formulation for plates under the Mindlin-Reissner theory. The formulation makes use of the weighted residual method and nodal integration to derive the assumed strain relations. An element formulation for four-node quadrilateral elements is implemented in the nonlinear finite element solver Abaqus using the UEL user element subroutine. Numerical tests are carried out on the new element and the results are presented.

  10. Implementation of mixed formulation elements in PC/NASTRAN

    Science.gov (United States)

    Schaeffer, Harry G.

    1993-01-01

    The purpose of this paper is to describe the implementation and use of a consistent family of two and three dimensional elements in NASTRAN. The elements which are based on a mixed formulation include a replacement of the original NASTRAN shear element and the addition of triangular quadrilateral shell elements and tetrahedral, pentahedral and hexahedral solid elements. These elements support all static loads including temperature gradient and pressure load. The mass matrix is also generated to support all dynamic rigid formats.

  11. Elemental analysis of silver coins by PIXE technique

    Energy Technology Data Exchange (ETDEWEB)

    Tripathy, B.B. [Department of Physics, Silicon Institute of Technology, Patia, Bhubaneswar 751 024 (India); Rautray, Tapash R. [Department of Dental Biomaterials, School of Dentistry, Kyungpook National University, 2-188-1 Samduk -dong, Jung-gu, Daegu 700 412 (Korea, Republic of); ARASMIN, G. Udayagiri, Kandhamal, Orissa 762 100 (India)], E-mail: tapash.rautray@gmail.com; Rautray, A.C. [ARASMIN, G. Udayagiri, Kandhamal, Orissa 762 100 (India); Vijayan, V. [Praveen Institute of Radiation Technology, Flat No. 9A, Avvai Street, New Perungalathur, Chennai 600 063 (India)

    2010-03-15

    Elemental analysis of nine Indian silver coins during British rule was carried out by proton induced X-ray emission spectroscopy. Eight elements, namely Cr, Fe, Ni, Cu, Zn, As, Ag, and Pb were determined in the present study. Ag and Cu were found to be the major elements, Zn was the only minor element and all other elements are present at the trace level. The variation of the elemental concentration may be due to the use of different ores for making coins.

  12. Elemental analysis of silver coins by PIXE technique

    International Nuclear Information System (INIS)

    Tripathy, B.B.; Rautray, Tapash R.; Rautray, A.C.; Vijayan, V.

    2010-01-01

    Elemental analysis of nine Indian silver coins during British rule was carried out by proton induced X-ray emission spectroscopy. Eight elements, namely Cr, Fe, Ni, Cu, Zn, As, Ag, and Pb were determined in the present study. Ag and Cu were found to be the major elements, Zn was the only minor element and all other elements are present at the trace level. The variation of the elemental concentration may be due to the use of different ores for making coins.

  13. Exploring the Everyday Context of Chemical Elements: Discovering the Elements of Car Components

    Science.gov (United States)

    Franco-Mariscal, Antonio Joaquín

    2015-01-01

    This paper presents a project about the chemical elements made by 15-year-old Spanish high school students of Chemistry. It focuses on context-based teaching combined with the advantages of creating a large mural which subsequently is exposed in the school. The project consisted of researching the chemical elements in the different materials that…

  14. A combination of a connector for glass elements and such glass elements

    NARCIS (Netherlands)

    Veer, F.A.

    2014-01-01

    A combination of a connector for glass elements and such glass elements to provide a loadbearing glass construc- tion that comprises at least one glass post and at least one glass beam that are arranged adjacent to each other, wherein the connector is arranged to provide a rotationally fixed

  15. About the names of the chemical elements, including the transfermium elements

    OpenAIRE

    Rocha-Filho, Romeu C.; Chagas, Aécio Pereira

    1999-01-01

    The names of the chemical elements in Brazilian portuguese are presented, including a discussion of corresponding Brazilian nomenclature rules and translation of some parts of the pertinent IUPAC rules. The rules for naming groups of elements in the periodic table, as well as those for the symbolic indication of atomic number, mass number and electric charge of atoms, are also presented.

  16. The Role of the Element Rhodium in the Hyperbolic Law of the Periodic Table of Elements

    Directory of Open Access Journals (Sweden)

    Albert Khazan

    2008-07-01

    Full Text Available The role of the element rhodium as an independent affirmation of calculations by the Hyperbolic Law and validity of all its relations is shown herein. The deviation in calculation by this method of the atomic mass of heaviest element is 0.0024%, and its coefficient of scaling 0.001-0.005%.

  17. Electron Configuration, and Element No.155 of the Periodic Table of Elements

    Directory of Open Access Journals (Sweden)

    Khazan A.

    2011-04-01

    Full Text Available Blocks of the Electron Configuration in the atom are considered with taking into account that the electron configuration should cover also element No.155. It is shown that the electron configuration formula of element No.155, in its graphical representation, completely satisfies Gaussian curve.

  18. Electron Configuration, and Element No.155 of the Periodic Table of Elements

    Directory of Open Access Journals (Sweden)

    Khazan A.

    2011-04-01

    Full Text Available Blocks of the Electron Configuration in the atom are considered with taking into ac- count that the electron configuration should cover also element No.155. It is shown that the electron configuration formula of element No.155, in its graphical representation, completely satisfies Gaussian curve.

  19. Can ID repetitive elements serve as cis-acting dendritic targeting elements? An in vivo study.

    Directory of Open Access Journals (Sweden)

    Tasneem Khanam

    Full Text Available Dendritic localization of mRNA/RNA involves interaction of cis-elements and trans-factors. Small, non-protein coding dendritic BC1 RNA is thought to regulate translation in dendritic microdomains. Following microinjections into cultured cells, BC1 RNA fused to larger mRNAs appeared to impart transport competence to these chimeras, and its 5' ID region was proposed as the cis-acting dendritic targeting element. As these ID elements move around rodent genomes and, if transcribed, form a long RNA stem-loop, they might, thereby, lead to new localizations for targeted gene products. To test their targeting ability in vivo we created transgenic mice expressing various ID elements fused to the 3' UTR of reporter mRNA for Enhanced Green Fluorescent Protein. In vivo, neither ID elements nor the BC1 RNA coding region were capable of transporting EGFP RNA to dendrites, although the 3' UTR of alpha-CaMKII mRNA, an established cis-acting element did produce positive results. Other mRNAs containing naturally inserted ID elements are also not found in neuronal dendrites. We conclude that the 5' ID domain from BC1 RNA is not a sufficient dendritic targeting element for mRNAs in vivo.

  20. On diversity performance of two-element coupling element based antenna structure for mobile terminal

    DEFF Research Database (Denmark)

    Al-Hadi, Azremi Abdullah; Toivanen, Juha; Laitinen, Tommi

    2010-01-01

    fading. The main challenge of antenna diversity in practical application is the integration of multiple antennas on a small ground plane. Two-element antenna structure based on coupling element antenna concept for diversity application has been studied in previous work and it has shown to be feasible...