WorldWideScience

Sample records for elektronen-synchrotron desy scientific

  1. Deutsches Elektronen-Synchrotron DESY. Scientific annual report 1991

    International Nuclear Information System (INIS)

    1991-11-01

    The scientific annual report 1991 presented by DESY again is a very detailed summary of the activities. The HERA activities reported for the most part deal with the preparatory work for the scientific programme for electron-proton collisions in HERA, and with the modified DORIS III electron-positron storage ring. But at the time this annual report will have been published, the physics studies at HERA will have yielded the first and certainly interesting scientific results, and there also are scientific results available of experiments with the newly installed beam guides in DORIS. (orig.) [de

  2. Deutsches Elektronen-Synchrotron DESY. Scientific annual report 1993

    International Nuclear Information System (INIS)

    1994-05-01

    The main event in 1993 was the commissioning start-up of DESY as synchrotron radiation source. The annual report covers activities in research (also DESY-Zeuthen), machinery, central data processing, development, and operation. There is much interest in international cooperation. (orig.) [de

  3. Deutsches Elektronen-Synchrotron DESY. Scientific annual report 1995

    International Nuclear Information System (INIS)

    1996-06-01

    As a result of the symbiosis between particle physics and synchrotron radiation research, the spectrum of research done at DESY is extraordinarily large, from research on elementary particles to solid state and surface physics, geosciences, chemistry and materials research up to molecular biology and medical diagnostics. This programme is unique in Europe. In 1995, research work was done by nearly 3000 scientists from 280 different institutions in 35 countries. About 1200 of these scientists were experts in particle physics. DESY is also one of the most important national research centers of Germany: The experimental facilities of HERA and DORIS III are used by about 1700 scientists from more than 90 German universities and research institutions. The annual report deals with research, machines and operation. (orig./DG) [de

  4. Von schnellen Teilchen und hellem Licht 50 Jahre Deutsches Elektronen-Synchrotron DESY

    CERN Document Server

    Lohrmann, Erich

    2009-01-01

    Das 1959 in Hamburg als Zentrum für Elementarteilchenforschung gegründete "Deutsche Elektronen-Synchrotron DESY" gelangte durch Pionierleistungen in der Entwicklung von Hochenergie-Beschleunigern und Speicherringen zu weltweiter Anerkennung. Seiner internationalen Nutzergemeinde sind eine Reihe wichtiger Entdeckungen über die Materiebausteine Quarks und Gluonen und die Kräfte, welche die Welt im Innersten zusammenhalten, zu verdanken. Zusätzlich wurde die Synchrotronstrahlung für breite Anwendungsgebiete erschlossen und ihre Nutzung systematisch ausgebaut mit Ergebnissen, die gleichrangig neben denen in der Teilchenforschung stehen. Dieses Buch behandelt die Entwicklung des Forschungszentrums von den Anfängen bis in das Jahr 2003, in dem mit dem Beschluss zum Bau des Europäischen Röntgenlasers in Hamburg eine Änderung der Schwerpunktsetzung in der Beschleunigerentwicklung erfolgte, die seitdem auf neuartige Photonenquellen gerichtet ist. Die wichtigsten nachfolgenden Ereignisse werden ebenfalls kurz...

  5. Deutsches Elektronen-Synchrotron DESY. Scientific annual report 1992

    International Nuclear Information System (INIS)

    1993-11-01

    The main event in 1992 was the beginning of the research program of HERA. The annual report covers activities in research, machinery, central data processing, development, and operation. There is much interest in international cooperation. (HP) [de

  6. Cost accounting at the Deutsches Elektronen Synchrotron = DESY

    International Nuclear Information System (INIS)

    1979-01-01

    The cost accounting procedure, consisting of accountings of cost type, burden centers and over-all projects, makes available comprehensive information at regular intervals. This procedure assists in the acquisition of data concerning the costs of the individual projects, data which at the same time form the basis for determining internal services which can be activated or for the invoicing of outside contracts. In addition, the cost accounting can insure a detailed comparison of debits and assests, if corresponding standards are established for cost type, burden centers and over-all projects. The cost accounting print-outs, published quarterly, are put at the disposal of the project commission, among others, which oversees the handling of technical projects, from project application through the planning stage and execution until completion. Further evaluations are planned, in particular, concerning the introduction of company code numbers as well as the projection of cost accounting results into future planning considerations. (author)

  7. Establishing a method for the design and maintenance of emergency evacuation plans based on the computer aided facility management (CAFM) at DESY; Entwicklung und Einfuehrung eines Verfahrens zur Erstellung und Pflege von Flucht- und Rettungsplaenen auf Grundlage des computergestuetzten Facility Managements (CAFM) am Deutschen Elektronen-Synchrotron (DESY)

    Energy Technology Data Exchange (ETDEWEB)

    Eucker, S.

    2005-12-15

    The present thesis describes a procedure for the design and maintenance of evacuation and rescue plans in a CAMF environment at the German Electron Synchrotron (DESY). The procedure is developed as business-process model and vizualized by the Unified Modelling Language (UML). The design of the evacuation and rescue plans and the technical design with a CAD software are presented. The introduction of the procedure pursues by the exemplary providing of a building with evacuation and rescue plans, Additionally safety informations of the evacuation and rescue plans are provided via the DESY Intranet. The termination of this thesis is the summarizing of the results and the experiences of the project as well as an outlook about future developments at DESY.

  8. Scientific annual report 1980 DESY

    International Nuclear Information System (INIS)

    This annual report contains a survey about the organization of DESY, a description of the different experiments performed at DESY and the developments in accelerator technology and data processing, as well as a list of publications and speeches. (HSI) [de

  9. DESY scientific annual report 1987

    International Nuclear Information System (INIS)

    1988-05-01

    This annual report contains a short description of the organization of DESY, extended abstracts concerning the experimental studies at the PETRA and DORIS storage rings, the development of the ZEUS detector, synchrotron-radiation experiments, theory of elementary particles, development of counting electronics, technical developments of the HERA, DORIS II and PETRA II storage rings and the DESY II respectively DESY I/III synchrotron, radiation protection, as well as data processing, and a list of speeches, publications, and theses. (HSI)

  10. DESY. Scientific annual report 2009

    International Nuclear Information System (INIS)

    2010-07-01

    The following topics are dealt with: Research with HERA and LHC, developments for the ILC, elementary-particle theory, astroparticle physics, the DESY Grid center, the ALPS experiment for the search for very light unknown particles decaying into γγ, the OLYMPUS experiment, experiments with synchrotron radiation at DORIS III and PETRA III, developments of FLASH and the European XFEL, the DESY accelerators, national and international collaboration, electronics development, speeches and publications. (HSI)

  11. Scientific annual report 1979 DESY

    International Nuclear Information System (INIS)

    In this annaual report the experiments at the storage rings PETRA and DORIS as well at the other DESY accelerators together with the synchrotron radiation experiments are described. Furthermore some developments in data processing in medicine and new detection methods are considered. In addition a list of publications and speeches is given. (HSI) [de

  12. DESY. Scientific annual report 2003

    International Nuclear Information System (INIS)

    2004-01-01

    In the following the main progresses at DESY in the fields accelerator development, elementary-particle physics, research with photons and particle astrophysics, as well as the accelerator development are briefly presented. More detailed descriptions of the events and important developments of the year 2003 are found in the following chapters of the present annual report [de

  13. Turning the Ship: The Transformation of DESY, 1993-2009

    Science.gov (United States)

    Heinze, Thomas; Hallonsten, Olof; Heinecke, Steffi

    2017-12-01

    This article chronicles the most recent history of the Deutsches Elektronen-Synchrotron (DESY) located in Hamburg, Germany, with particular emphasis on how this national laboratory founded for accelerator-based particle physics shifted its research program toward multi-disciplinary photon science. Synchrotron radiation became DESY's central experimental research program through a series of changes in its organizational, scientific, and infrastructural setup and the science policy context. Furthermore, the turn toward photon science is part of a broader transformation in the late twentieth century in which nuclear and particle physics, once the dominating fields in national and international science budgets, gave way to increasing investment in the materials sciences and life sciences. Synchrotron radiation research took a lead position on the experimental side of these growing fields and became a new form of big science, generously funded by governments and with user communities expanding across both academia and industry.

  14. DESY. Scientific annual report 2009; DESY. Wissenschaftlicher Jahresbericht 2009

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-07-15

    The following topics are dealt with: Research with HERA and LHC, developments for the ILC, elementary-particle theory, astroparticle physics, the DESY Grid center, the ALPS experiment for the search for very light unknown particles decaying into {gamma}{gamma}, the OLYMPUS experiment, experiments with synchrotron radiation at DORIS III and PETRA III, developments of FLASH and the European XFEL, the DESY accelerators, national and international collaboration, electronics development, speeches and publications. (HSI)

  15. DESY. Scientific annual report 2003; DESY. Wissenschaftlicher Jahresbericht 2003

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    In the following the main progresses at DESY in the fields accelerator development, elementary-particle physics, research with photons and particle astrophysics, as well as the accelerator development are briefly presented. More detailed descriptions of the events and important developments of the year 2003 are found in the following chapters of the present annual report. [German] Im Folgenden werden die wesentlichen Fortschritte bei DESY auf den Gebieten Beschleunigerentwicklung, Elementarteilchenphysik, Forschung mit Photonen und Astroteilchenphysik sowie der Beschleunigerentwicklung kurz dargestellt. Detailliertere Ausfuehrungen der Ereignisse und wichtige Entwicklungen des Jahres 2003 finden sich in den folgenden Kapiteln des vorliegenden Jahresberichts. (orig.)

  16. Experimental setup for x-ray absorption spectroscopy at the DESY

    International Nuclear Information System (INIS)

    Rabe, P.; Tolkiehn, G.; Werner, A.

    1979-10-01

    In this paper we describe an apparatus used at the Deutsches Elektronen-Synchrotron (DESY) for the measurement of x-ray absorption spectra, specially designed for the investigation of the extended x-ray absorption fine structure (EXAFS). Performance of the setup is discussed and compared with an apparatus using the bremsstrahlung of a conventional x-ray source. (orig.)

  17. DESY annual report on scientific activities 1982

    International Nuclear Information System (INIS)

    This annual report contains a description of the organization of DESY, a list of international collaborations, short descriptions of the experiments at the storage rings PETRA and DORIS II, the muon scattering experiments at the CERN SPS, experiments with synchrotron radiation, and research in theoretical physics, descriptions of the status and developments of the accelerators and storage rings, a survey about the developments in data processing, and a list of publications and speeches. (HSI) [de

  18. DESY Theoryfest

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1987-01-15

    The traditional annual Theory Workshop at the German DESY Laboratory in Hamburg concentrated this time on quantum chromodynamics (QCD) – the unchallenged but yet to be convincingly confirmed theory of quark and gluon forces in strong nuclear interactions. In principle, QCD describes a broad range of phenomena, but it is a long way to get from the apparently simple basic equations of the theory to the observed experimental data. Tests of QCD are good only to within about 20 per cent, and in many cases a lot of work is required even to attain this goal. However the workshop showed that theorists are far from discouraged by technical difficulties and try to make progress with refined perturbation methods and with numerical simulations.

  19. DESY Theoryfest

    International Nuclear Information System (INIS)

    Anon.

    1987-01-01

    The traditional annual Theory Workshop at the German DESY Laboratory in Hamburg concentrated this time on quantum chromodynamics (QCD) – the unchallenged but yet to be convincingly confirmed theory of quark and gluon forces in strong nuclear interactions. In principle, QCD describes a broad range of phenomena, but it is a long way to get from the apparently simple basic equations of the theory to the observed experimental data. Tests of QCD are good only to within about 20 per cent, and in many cases a lot of work is required even to attain this goal. However the workshop showed that theorists are far from discouraged by technical difficulties and try to make progress with refined perturbation methods and with numerical simulations

  20. Scientific Equipment Division - Overview

    International Nuclear Information System (INIS)

    Halik, J.

    2001-01-01

    . The machine allows the following tool movements in particular axes: X - 1000 mm, Y- 500 mm, Z - 500 mm; it is controlled by HEIDENHAIN 407 Control System, and ensures the accuracy and reproducibility of machining of 0.01 mm in each of the axis. In 2000, the Department of Mechanical Construction designed, manufactured and assembled an equipment for the following foreign laboratories: - Deutches Elektronen Synchrotron, Hamburg, FRG; - Forschungszentrum Karlsruhe, FRG; - Institute of Physics, Polish Academy of Sciences, Warsaw, Poland; - Jagiellonian University, Cracow, Poland; - Massachusetts Institute of Technology, Cambridge, Massachusetts, USA; - Brookhaven National Laboratory, Upton, NY, USA. Besides the large designs and systems described below, some interesting works were made for the departments of our Institute and other institutions: 1. Design and manufacturing of the new photon calorimeter of Luminosity Monitor for ZEUS Experiment at DESY; 2. Final installation of Detector Enclosures and Dry Air System for PHOBOS Experiment at BNL; 3. Design and manufacturing of the shutter and manufacturing of supporting structures for AUGER Project in Argentina; 4. Manufacturing and installation of Deflectors I and II for cyclotron AIC-144 at our Institute; 5. Design and manufacturing of resonator joggle for cyclotron AIC-144 at our Institute; 6. Upgrade of outlet chamber of for cyclotron AIC-144 at our Institute. (author)

  1. DESY Theory Workshop

    International Nuclear Information System (INIS)

    Anon.

    1985-01-01

    Held during the 'Festwoche' which marked the 25th anniversary of the German DESY Laboratory last year, the traditional DESY Theory Workshop concentrated on weak interactions of heavy quarks and on non-standard models for weak interactions, together with a progress report on lattice gauge theories with fermions. The organizing committee had invited eleven lecturers to present experiments and theoretical ideas in these fields. Also many short communications contributed interesting material

  2. DESY. Scientific annual report 2006

    International Nuclear Information System (INIS)

    2007-06-01

    The following topics are dealt with: The H1 experiment, the ZEUS experiment, the HERMES experiment, the HERA-B experiment, the ATLAS experiment, the CMS experiment, astroparticle physics, theoretical work on the standard model and its possible extensions, particle cosmology, string theory, and lattice gauge theory, the International Linear Collider, linear-accelerator technologies, the storage rings HERA and DORIS III, the preaccelerators, the free electron laser FLASH, the future synchrotron radiation source PETRA III, the XFEL, accelerator technologies concerning injection and ejection, RF techniques, accelerator control, personnel safety system, beam diagnostics and instrumentation, beam control, vacuum techniques, cryogenics and superconductivity, power supplies, as well as vacuum techniques. (HSI)

  3. Annual scientific report DESY 1975

    International Nuclear Information System (INIS)

    1976-01-01

    The main point of interest in experimental research was the study of the decay properties of PSI (3.1) and PSI (3.7). Information of particular value was gained from the study of those decay channels in which two or more photons are produced in the final state. A particle Pc and indications for another new particle were found. Apart from the search for new particles, the photo- and electroproduction of pseudoscalar and vector mesons was studied as well as shading effects in complex nuclei. The experiments finshed in progress, and to be started in 1975 are all shortly dealt with. The main subjects in the field of machines were the improvement of the performance of linacs, synchrotron and storage ring as well as the preparative work on PETRA.- A list of 1975 publications is added. (BJ) [de

  4. Division of Scientific Equipment - Overview

    International Nuclear Information System (INIS)

    Halik, J.

    2002-01-01

    allows the following tool movements in particular axes: X - 1000 mm, Y - 500 mm, Z - 500 mm; it is controlled by HEIDENHAIN 407 Control System, and ensures the accuracy and reproducibility of machining of 0.01 mm in each of the axis. In 2001 the Department of Mechanical Construction designed, manufactured and assembled an equipment for the following foreign laboratories: * Deutches Elektronen Synchrotron, Hamburg, FRG, * European Organization for Nuclear Research CERN, Geneva, Switzerland, * Forschungszentrum Karlsruhe, FRG, * Institute of Physics, Polish Academy of Science, Warsaw, Poland, * Jagiellonian University, Cracow, Poland. Besides the large designs and systems described below, some interesting works were made for the departments of our Institute and other institutions: 1. Design and manufacturing of the new photon calorimeter of Luminosity Monitor for ZEUS Experiment at DESY, 2. Manufacturing of the shutter and supporting structures for AUGER Project in Argentina, 3. Manufacturing and assembly of 105 sets of mirror positioning devices for AUGER Project in Argentina, 4. Design of ion source for cyclotron AIC-144 at our Institute, 5. Design and manufacturing of a vacuum chamber and parts of vacuum lines for dual beam ion implantator at our Institute, 6. Design and manufacturing of experimental chamber for Proton Microprobe at our Institute. (author)

  5. The DESY Research Center

    International Nuclear Information System (INIS)

    Waloschek, P.

    1988-01-01

    On November 12, 1964, the 6 GeV electrons synchrotron and the associated utility facilities were dedicated for regular operation. Since that date, the DESY Research Center, the German Electron Synchrotron in Hamburg, has offered to scientists from all over the world unique facilities in which to study the smallest constituents of matter. At present, some 580 physicists participate in DESY's research work on particle physics and high energy physics. Most of them are university teachers, a great many come from abroad. Their home institutions make considerable contributions to setting up the measuring equipment. Another 500 physicists annually make use of the extensive synchrotron radiation facilities available at DESY. DESY is one of the thirteen national research laboratories in the Federal Republic of Germany; its annual government grants for operation and personnel (1300 staff members in 1988) amount to some DM 150 million. In addition, some DM 950 million will be invested into the construction of the new HERA facility between 1984 and 1990, of which 15% will be contributed by foreign institutions. The ordinary budget of DESY is paid 90% by the German Federal Ministry for Research and Technology (BMFT) and 10% by the city of Hamburg. (orig.)

  6. DESY: Gus Voss retires

    International Nuclear Information System (INIS)

    Anon.

    1995-01-01

    As mentioned briefly in the previous issue (page 28), last year Gus Voss reached the age of 65 and therefore was released from official duties at DESY from the beginning of this year. However, as a senior scientist, he keeps an office at DESY and will continue his work in all the international committees of which he is a member, as well as giving colleagues and friends around the world the benefit of his advice - ''if requested'', as he likes to phrase it. Gus Voss was leader of DESY's Accelerator Division and as such a Laboratory Director for exactly 22 years. He contributed to planning the first electron synchrotron at DESY back in 1958-9. Then he went to CEA (Cambridge, Massachusetts), where he directed with Ken Robinson the famous bypass electron-positron collider project. He is also well known for his important contributions to accelerator technology, like low beta insertion for storage rings, which he made (again with Ken Robinson) in 1966. In January 1973 he returned to DESY, called by Wolfgang Paul, then chairman of the Board of Directors. He arrived in time to commission and inaugurate the DORIS electronpositron storage ring in 1974 and then directed the design and construction of the bigger PETRA ring, which began operation in 1978. Together with Bjorn Wiik he directed construction of the HERA electronproton collider, in operation since 1992. During the last few years he took strong interest in linear colliders, together with Norbert Holtkamp building a 400 MeV test section to develop new linear collider technology. Voss' position at DESY is taken over by Dieter Trines (52) who contributed to the construction and commissioning of PETRA from 1975. Dieter Trines spent two years in the TASSO Group at PETRA and in 1983 joined the HERA effort as head of the Proton Ring Vacuum Group

  7. DESY: Theory with flavour

    International Nuclear Information System (INIS)

    Rueckl, R.

    1989-01-01

    Last year, the annual Theory Workshop at the German DESY Laboratory in Hamburg had 'Flavour Physics' as its main theme. The sighting by the UA1 experiment at CERN's proton-antiproton collider and by the ARGUS team at DESY of 'oscillations' in the electrically neutral B mesons carrying the beauty quantum number, and the measurement at CERN of a new parameter in the delicate violation of combined particle-antiparticle and left-right symraetry (CP) in the decays of neutral kaons have made this subject particularly topical

  8. DESY: Theory with flavour

    Energy Technology Data Exchange (ETDEWEB)

    Rueckl, R.

    1989-03-15

    Last year, the annual Theory Workshop at the German DESY Laboratory in Hamburg had 'Flavour Physics' as its main theme. The sighting by the UA1 experiment at CERN's proton-antiproton collider and by the ARGUS team at DESY of 'oscillations' in the electrically neutral B mesons carrying the beauty quantum number, and the measurement at CERN of a new parameter in the delicate violation of combined particle-antiparticle and left-right symraetry (CP) in the decays of neutral kaons have made this subject particularly topical.

  9. DESY: QCD workshop

    International Nuclear Information System (INIS)

    Ingelman, Gunnar

    1994-01-01

    The traditional annual DESY Theory Workshop highlights a topical theory sector. The most recent was under the motto 'Quantum Chromo-Dynamics' - QCD, the field theory of quarks and gluons. The organizers had arranged a programme covering most aspects of current QCD research. This time the workshop was followed by a topical meeting on 'QCD at HERA' to look at the electron-proton scattering experiments now in operation at DESY's new HERA collider

  10. DESY greets CERN

    CERN Multimedia

    Helmut Dosch, Chairman of the DESY Board of Directors, continues the series of occasional exchanges between CERN and other laboratories world-wide. As part of this exchange, CERN Director-General Rolf Heuer wrote a message in DESY inForm. Helmut Dosch took over from Albrecht Wagner in March 2009. You may think that the connections between CERN and DESY are obvious – particle physics labs with record-breaking accelerators and users from all around the world trying to solve mankind’s great mysteries. We even exchanged a few Directors. But did you know that there are similarities that are much closer to home – for example that both labs have names for their staff in the host language that are untranslatable into English? You are CERNoises and CERNois, we are DESYanerinnen and DESYaner. And in the end it’s the people it all comes down to. We at DESY admire the resourcefulness, enthusiasm, dedication and perseverance with which you at CERN have designed, built, started ...

  11. DESY: HERA commissioning

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    The commissioning of the world's first electron-proton collider - the 6.3 kilometre HERA ring at the DESY Laboratory in Hamburg - last year was the result of more than a decade of careful planning, design and construction

  12. DESY: HERA polarization

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    The new HERA electron-proton collider at DESY in Hamburg achieved the first luminosity for electron-proton collisions on 19 October last year. Only one month later, on 20 November, HERA passed another important milestone with the observation of transverse electron polarization

  13. DESY: HERA polarization

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1992-03-15

    The new HERA electron-proton collider at DESY in Hamburg achieved the first luminosity for electron-proton collisions on 19 October last year. Only one month later, on 20 November, HERA passed another important milestone with the observation of transverse electron polarization.

  14. Centrally managed tapes at DESY

    International Nuclear Information System (INIS)

    Hell, O.

    1994-01-01

    Tapes at DESY are managed by the computer center and thus offer virtually unlimited storage space to the DESY computer center users. This paper describes the most recent version of the DESY tape management system, its predecessors having been in service for many years

  15. DESY: focuses on HERA

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1992-12-15

    On 1 October, a special 'FestKolloquium' at DESY marked the official start of the research programme at the new HERA electron-proton collider, which began operations earlier this year. The timing could not have been better, as HERA performance had improved by a factor of ten during the two weeks beforehand. More than 600 guests assembled in one of the big halls previously used for assembly of major components for HERA experiments.

  16. DESY: focuses on HERA

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    On 1 October, a special 'FestKolloquium' at DESY marked the official start of the research programme at the new HERA electron-proton collider, which began operations earlier this year. The timing could not have been better, as HERA performance had improved by a factor of ten during the two weeks beforehand. More than 600 guests assembled in one of the big halls previously used for assembly of major components for HERA experiments

  17. DESY: DORIS-III

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1991-07-15

    The DORIS electron-positron ring at the Hamburg DESY Laboratory has a long tradition - first beams were stored at the end of 1973 in the initial double-ring configuration. A six-month upgrade in 1982 resulted in the single-ring DORIS-II, attaining higher energies and improved collision rates. During its 28-year career so far, DORIS has made important contributions, particularly in heavy flavour physics, and, after a further upgrade, this looks set to continue.

  18. DESY: DORIS-III

    International Nuclear Information System (INIS)

    Anon.

    1991-01-01

    The DORIS electron-positron ring at the Hamburg DESY Laboratory has a long tradition - first beams were stored at the end of 1973 in the initial double-ring configuration. A six-month upgrade in 1982 resulted in the single-ring DORIS-II, attaining higher energies and improved collision rates. During its 28-year career so far, DORIS has made important contributions, particularly in heavy flavour physics, and, after a further upgrade, this looks set to continue

  19. Twelve years at DESY

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    As reported in our previous issue (page 27), on 28 February Volker Soergel stepped down after serving as Chairman of the Board of the DESY Laboratory in Hamburg since January 1981, when the previous chairman, Herwig Schopper, moved to become Director General of CERN. DESY is now headed by Bjorn Wiik. During the twelve years of Soergel's mandate, DESY substantially evolved and progressed. Dominating the landscape was the big HERA electron-proton collider - the world's first - proposed, approved, constructed and commissioned under Soergel's leadership. As well as pioneering electron-proton collisions, HERA also broke new ground in international collaboration. At the approval of the project by the German government, it had already been made clear that both the machine and its experiments had to be built with full international cooperation, using material contributions from foreign institutes. With the difficult task of transforming these requirements into hard reality, Volker Soergel succeeded brilliantly. The 'HERA model', with interested countries pledging contributions in equipment and/or manpower, established a new route to major project involvement. For HERA, the substantial Italian contribution, organized by Antonino Zichichi, was vital to the success of the project

  20. DESY: Theory Workshop 1994

    International Nuclear Information System (INIS)

    Anon.

    1995-01-01

    For 1994, the traditional annual DESY Theory Workshop was devoted to supersymmetry. This is a novel symmetry relating bosons (normally force-carrying particles) and fermions (which normally feel the forces). In supersymmetry, bosons could have fermion counterparts, and vice versa. Although this subject is still largely a theorist's playground, many of the particles and phenomena predicted by models of low energy supersymmetry now seem within reach of present and planned future accelerator experiments, and this was one of the main reasons for choosing a more speculative theme after more phenomenological orientations in recent DESY Theory Workshops. After the welcome by DESY Director General Bjorn Wiik, attention was immediately focused on experimental aspects. P. Steffen (DESY) presented the latest results from HERA. In the following talks, K. Honscheid (Ohio), S. Lammel (Fermilab) and S. Komamiya (CERN and Tokyo) reviewed the experimental situation at electron-proton, hadron and electron-positron colliders, respectively. They discussed the most recent limits for supersymmetric particles (still none in sight!), as well as precision experiments where deviations from the standard model might show up. The workshop was treated to a first rate introduction to the MSSM (''minimal supersymmetric standard model'') by F. Zwirner (CERN), who clearly explained the motivation for going supersymmetric and reviewed the basic structure of the MSSM, its particle content and couplings, as well as the soft breaking terms necessary to avoid immediate conflict with experiment. This was followed by a systematic discussion of the Higgs sector by H. Haber (Santa Cruz), where the first hints of new physics could appear. However, he also made clear that it may not be easy to distinguish standard and non-standard Higgs bosons. Symmetries beyond the standard model, and in particular supersymmetric grand unification were treated in detail by G. Ross (Oxford) and S

  1. DESY. Scientific annual report 2006; DESY. Wissenschaftlicher Jahresbericht 2006

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-06-15

    The following topics are dealt with: The H1 experiment, the ZEUS experiment, the HERMES experiment, the HERA-B experiment, the ATLAS experiment, the CMS experiment, astroparticle physics, theoretical work on the standard model and its possible extensions, particle cosmology, string theory, and lattice gauge theory, the International Linear Collider, linear-accelerator technologies, the storage rings HERA and DORIS III, the preaccelerators, the free electron laser FLASH, the future synchrotron radiation source PETRA III, the XFEL, accelerator technologies concerning injection and ejection, RF techniques, accelerator control, personnel safety system, beam diagnostics and instrumentation, beam control, vacuum techniques, cryogenics and superconductivity, power supplies, as well as vacuum techniques. (HSI)

  2. Dr. John Marburger visits DESY

    CERN Multimedia

    2003-01-01

    Dr. John Marburger, Director of the United States Office of Science and Technology Policy, visited the research center DESY in Hamburg. The American physicist wanted to inform himself about the status of the TESLA X-ray laser and the TESLA linear collider as well as the international collaboration at DESY (1/2 page).

  3. DESY: ARGUS bows out

    International Nuclear Information System (INIS)

    Wagner, Albrecht

    1993-01-01

    Last year the ARGUS experiment at DESY's DORIS electron-positron storage ring stopped taking data after ten years of fruitful physics. Analysis and new results will continue for some time, but members of the group are already looking to new physics horizons. The ARGUS collaboration was formed in 1978 by groups from DESY, Dortmund, Heidelberg (IHEP), Lund, Moscow (ITEP), and South Carolina under the leadership of Walter Schmidt-Parzefall. Later groups joined from IPP Canada, Kansas, Ljubljana, Karlsruhe, Erlangen/Nurnberg, Heidelberg (MPI) and Dresden. The detector was conceived to investigate the physics of the beauty and charm quarks and the tau lepton at the upgraded DORIS II electronpositron storage ring. With a similar programme started by the CLEO collaboration at Cornell's CESR electron-positron collider, the resulting competition ensured good physics. ARGUS rolled into the beam in October 1982 and took data until October 1992. In May 1993 the decision was taken to stop further ARGUS running. During those ten years a broad spectrum of physics has been covered, including weak decays of beauty and charm quarks and tau leptons, hadron spectroscopy, quark/gluon mechanisms, photon-photon interactions and particle searches. In particular, ARGUS has made valuable contributions to determination of many fundamental constants of the Standard Model. These comprise measurements of quark transitions (CKM matrix elements) in the decays of B mesons (containing the beauty quark), the determination of the properties of the tau lepton and its neutrino, as well as a measurement of the quark coupling constant. The charm study has resulted in first observations of many charmed hadrons and decay modes. The study of quark and gluon mechanisms (fragmentation) has yielded valuable input for future experiments, while the first observations of new final states in photon-photon interactions have created much interest. A total luminosity of 520 inverse picobarns has been

  4. DESY: HERA moves on

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    First encouraging physics results from the new HERA electron-proton collider at DESY, Hamburg, reported last year (October, page 6), came from the machine operating at less than 1% of its design luminosity (a measure of the proton-electron collision rate). In the short time available to the machine specialists, several substantial improvements have been made, and the HERA operating crew is confident of substantially improved performance when operations get underway again in April. The 820 GeV superconducting proton storage ring is behaving as expected. The number of stored bunches has been increased from 10 to 160 (the maximum is 210). Without any optimization the current reached 13 mA, nearly 10% of the design level, and the beam lifetime is generally longer than 50 hours. The protons can thus be kept in the machine over several successive electron fills. The long proton beam lifetime attests to the excellent vacuum in the beam pipe (much of it at liquid helium temperature) and to minimal beam losses. In the electron ring, 100 bunches were stored in the most recent tests (initially only ten bunches could be handled) and the multibunch feedback system brought into action. The 23 mA current represented about 40% of the design figure. The energy is usually kept around 27 GeV, but could be increased to 30 GeV if required

  5. DESY: Synchrotron and storage rings

    CERN Multimedia

    1972-01-01

    An improvement programme has been under way for several years at the 7.5 GeV électron synchrotron at DESY. In particular it has been designed to increase the accelerated beam intensity, to achieve better quality of the ejected électron beams and photon beams and to improve machine reliability.

  6. DESY: Technology transfer on show

    International Nuclear Information System (INIS)

    Anon.

    1991-01-01

    As well as exploring the unknown, fundamental physics research, with its continual demands for special conditions and precision measurements, makes special demands on frontier technology. One of the most prolific areas of this technology transfer, superconductivity and cryogenics, was highlighted by a recent exhibition at DESY organized by the International Cryogenic Engineering Committee

  7. DESY: Technology transfer on show

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1991-12-15

    As well as exploring the unknown, fundamental physics research, with its continual demands for special conditions and precision measurements, makes special demands on frontier technology. One of the most prolific areas of this technology transfer, superconductivity and cryogenics, was highlighted by a recent exhibition at DESY organized by the International Cryogenic Engineering Committee.

  8. DESY annual report of scientific activities 1981

    International Nuclear Information System (INIS)

    1981-01-01

    This annual report contains short descriptions of the experiments at the storage rings PETRA and DORIS together with the experiments with the European Muon-collaboration, the experiments with the sychrotron radiation, the studies of theoretical physics, the developments of detectors and counting electronics, and the development of data processing in medicine, descriptions of the current status of the storage rings PETRA and DORIS and the synchrotron together with the radiation protection and the planning of the HERA storage ring, descriptions of the data processing systems and new developments in cryogenics, as well a list of publications and speeches. (HSI) [de

  9. DESY: Handling persistent eddy currents

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1990-04-15

    The vanishing electrical resistance of superconducting coils as well as their ability to provide magnetic fields far beyond those of saturated iron is the main motivation behind the push to use superconducting technology in big new proton accelerators. But this advantage can turn into a drawback at low excitations when the eddy currents - induced in any electromagnet when the field is changed - do not decay, but continue to flow. Preparations for the proton ring of the HERA electron-proton collider nearing completion at the German DESY Laboratory in Hamburg have borne this in mind.

  10. DESY: Handling persistent eddy currents

    International Nuclear Information System (INIS)

    Anon.

    1990-01-01

    The vanishing electrical resistance of superconducting coils as well as their ability to provide magnetic fields far beyond those of saturated iron is the main motivation behind the push to use superconducting technology in big new proton accelerators. But this advantage can turn into a drawback at low excitations when the eddy currents - induced in any electromagnet when the field is changed - do not decay, but continue to flow. Preparations for the proton ring of the HERA electron-proton collider nearing completion at the German DESY Laboratory in Hamburg have borne this in mind

  11. DESY: Choosing an electron route

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1995-09-15

    In surveying the current particle physics scene, the European Committee for Future Accelerators (ECFA) meeting held at DESY, Hamburg, in June naturally highlighted work at the host Laboratory. A particular focus was development work for the next generation of linear colliders to accelerate electrons and positrons towards a total collision energy of 0.5 TeV. Owing to the inherent simplicity of the annihilation process, the study of electron-positron interactions has yielded a wealth of information on the basic constituents of matter and the forces which act between them. Indeed, an electron-positron collider which covers the mass range between the W-pair production threshold and 500 GeV with a peak luminosity of order 5 x 10{sup 33} cm{sup -2}s{sup -1} will have a rich physics programme complementary to that at the LHC proton-proton collider to be built at CERN. Driven by the physics potential, there is at present a strong world-wide effort directed at providing the technical basis for the construction of TeV electron-positron linear colliders. DESY, in collaboration with more than 30 institutions from 9 countries, is exploring two options, TESLA and SBLC, for a 500 GeV - 2000 GeV linear collider.

  12. DESY: Choosing an electron route

    International Nuclear Information System (INIS)

    Anon.

    1995-01-01

    In surveying the current particle physics scene, the European Committee for Future Accelerators (ECFA) meeting held at DESY, Hamburg, in June naturally highlighted work at the host Laboratory. A particular focus was development work for the next generation of linear colliders to accelerate electrons and positrons towards a total collision energy of 0.5 TeV. Owing to the inherent simplicity of the annihilation process, the study of electron-positron interactions has yielded a wealth of information on the basic constituents of matter and the forces which act between them. Indeed, an electron-positron collider which covers the mass range between the W-pair production threshold and 500 GeV with a peak luminosity of order 5 x 10 33 cm -2 s -1 will have a rich physics programme complementary to that at the LHC proton-proton collider to be built at CERN. Driven by the physics potential, there is at present a strong world-wide effort directed at providing the technical basis for the construction of TeV electron-positron linear colliders. DESY, in collaboration with more than 30 institutions from 9 countries, is exploring two options, TESLA and SBLC, for a 500 GeV - 2000 GeV linear collider

  13. CERN and DESY react to Nature editorial

    CERN Multimedia

    2002-01-01

    In response to the editorial which appeared in the 20 December 2001 issue of Nature (No. 414, p. 829), CERN's Director-General and the spokesperson of DESY have issued the following replies, which have been published in the latest issue of Nature (No. 415, p. 472). Luciano Maiani's response   Spokesperson of DESY, Petra Folkerts' response

  14. DESY: HERA superconducting magnets OK; Theory workshop

    International Nuclear Information System (INIS)

    Anon.

    1990-01-01

    The HERA electron-proton collider being built at the DESY Laboratory in Hamburg is the first accelerator using superconducting magnets manufactured by industry on a large scale. For this pioneering step several potential problems now seem to be all well under control, with important contributions coming from both the manufacturers and DESY's accelerator specialists

  15. Induced mutations for improvement of desi cotton

    International Nuclear Information System (INIS)

    Waghmare, V.N.; Mohan, Punit; Singh, Phundan; Gururajan, K.N.

    2000-01-01

    Desi cotton varieties of Gossypium arboreum have wide adaptability and are relatively tolerant to biotic (insect pests and diseases) and abiotic (moisture and salt) stresses. Desi varieties have got potential to yield even under adverse and low input situations. Most of them are synchronous in maturity and possess consistent fibre properties. Despite such merits, very little attention has been paid for improvement of desi cotton. The present area under arboreum varieties is 17.0% (15.30 lakh ha.) against 65% (35.75 lakh ha) during 1947-48. Deliberate attempts are required to improve G. arboreum for its economic and quality characters to compete with upland varieties in rainfed cotton ecology

  16. DESY compact 2010. Highlights and annual report

    International Nuclear Information System (INIS)

    2011-01-01

    The following topics are dealt with: DESY, DORIS, the synchrotron radiation source PETRA III, the FLASH free-electron laser, the European XFEL, new concepts for free-electron lasers, special electron sources, the relativistic electron gun REGAE for atomic explorations, research with photons at FLASH, DORIS III, and PETRA III, the center for free-electron laser science CFEL, nano- and material sciences, molecular biology, HERA, Helmholt-alliance, LHC experiments, R and D activities for the ILC, elementary-particle theory, astroparticle physics, the DESY-GRID center, the ALPS and OLYMPUS experiments, cooperation with the Hambuge University, technology transfer, cooperation with industry. (HSI)

  17. A multi VO Grid infrastructure at DESY

    International Nuclear Information System (INIS)

    Gellrich, Andreas

    2010-01-01

    As a centre for research with particle accelerators and synchrotron light, DESY operates a Grid infrastructure in the context of the EU-project EGEE and the national Grid initiative D-GRID. All computing and storage resources are located in one Grid infrastructure which supports a number of Virtual Organizations of different disciplines, including non-HEP groups such as the Photon Science community. Resource distribution is based on fair share methods without dedicating hardware to user groups. Production quality of the infrastructure is guaranteed by embedding it into the DESY computer centre.

  18. Status of the DESY II project

    International Nuclear Information System (INIS)

    Hemmie, G.

    1987-01-01

    DESY II has been extensively tested at low magnet current excitations corresponding to 1 GeV maximum energy. After the old DESY I synchrotron was turned off in Nov. 86 the provisional power supplies were replaced by magnet- and rf-power supplies of full 8 GeV rating. All external beam lines have now been connected to the new machine. Some modifications on components are described. A report on the results from the initial tests of the machine under full power conditions is given

  19. The New Hyperspectral Sensor Desis on the Multi-Payload Platform Muses Installed on the Iss

    Science.gov (United States)

    Müller, R.; Avbelj, J.; Carmona, E.; Eckardt, A.; Gerasch, B.; Graham, L.; Günther, B.; Heiden, U.; Ickes, J.; Kerr, G.; Knodt, U.; Krutz, D.; Krawczyk, H.; Makarau, A.; Miller, R.; Perkins, R.; Walter, I.

    2016-06-01

    The new hyperspectral instrument DLR Earth Sensing Imaging Spectrometer (DESIS) will be developed and integrated in the Multi-User-System for Earth Sensing (MUSES) platform installed on the International Space Station (ISS). The DESIS instrument will be launched to the ISS mid of 2017 and robotically installed in one of the four slots of the MUSES platform. After a four month commissioning phase the operational phase will last at least until 2020. The MUSES / DESIS system will be commanded and operated by the publically traded company TBE (Teledyne Brown Engineering), which initiated the whole program. TBE provides the MUSES platform and the German Aerospace Center (DLR) develops the instrument DESIS and establishes a Ground Segment for processing, archiving, delivering and calibration of the image data mainly used for scientific and humanitarian applications. Well calibrated and harmonized products will be generated together with the Ground Segment established at Teledyne. The article describes the Space Segment consisting of the MUSES platform and the instrument DESIS as well as the activities at the two (synchronized) Ground Segments consisting of the processing methods, product generation, data calibration and product validation. Finally comments to the data policy are given.

  20. DESY: ARGUS looks at the tau neutrino

    International Nuclear Information System (INIS)

    Anon.

    1991-01-01

    As well as contributing important results on B mesons (particles carrying the fifth - 'beauty' - quark), the ARGUS detector at DESY's DORIS II electron-positron storage ring also specializes in the third generation of weakly interacting particles (leptons), with data on about half a million examples of electron-positron collisions producing pairs of tau particles

  1. ELFE at DESY, status of machine studies

    Energy Technology Data Exchange (ETDEWEB)

    Tkatchenko, A.

    1996-12-31

    In this paper, the main outlines of the ELFE at DESY project are describes and the problems associated with the scenario proposed in july 1995 are reviewed. The results of the feasibility study recently carried out are presented and the achievable performances of the extracted beam in terms of emittance, energy spread and duty factor are given. (author).

  2. ELFE at DESY, status of machine studies

    International Nuclear Information System (INIS)

    Tkatchenko, A.

    1996-01-01

    In this paper, the main outlines of the ELFE at DESY project are describes and the problems associated with the scenario proposed in july 1995 are reviewed. The results of the feasibility study recently carried out are presented and the achievable performances of the extracted beam in terms of emittance, energy spread and duty factor are given. (author)

  3. DESY: Hot spots in the nucleon?

    International Nuclear Information System (INIS)

    Ali, A.; Bartels, J.

    1990-01-01

    The HERA electron-proton collider nearing completion at the DESY Laboratory in Hamburg and scheduled to come on-line next spring will provide unusual collision conditions (protons of almost 1000 GeV slamming into 30 GeV electrons). This physics will probe the deep structure of the proton under new conditions, particularly the kinematic area, known in the trade as small x, where a constituent quark carries only a small fraction of the total proton momentum

  4. The status of DESY H- - sources

    International Nuclear Information System (INIS)

    Peters, J.

    1996-01-01

    Two different types of H - sources are operated at DESY, a magnetron source and an rf- driven volume source. H - sources for HERA have to run for long uninterrupted periods with a low duty factor and a high reliability. Several necessary improvements are under construction for our rf - driven volume source. The status of both our magnetron and our volume source will be discussed and the first LINAC III experiment with the rf-driven volume source will be presented. (author)

  5. Printing in heterogeneous computer environment at DESY

    International Nuclear Information System (INIS)

    Jakubowski, Z.

    1996-01-01

    The number of registered hosts DESY reaches 3500 while the number of print queues approaches 150. The spectrum of used computing environment is very wide: from MAC's and PC's, through SUN, DEC and SGI machines to the IBM mainframe. In 1994 we used 18 tons of paper. We present a solution for providing print services in such an environment for more than 3500 registered users. The availability of the print service is a serious issue. Using centralized printing has a lot of advantages for software administration but creates single point of failure. We solved this problem partially without using expensive software and hardware. The talk provides information about the DESY central central print spooler concept. None of the systems available on the market provides ready to use reliable solution for all platforms used for DESY. We discuss concepts for installation, administration and monitoring large number of printers. We found a solution for printing both on central computing facilities likewise for support of stand-alone workstations. (author)

  6. DESY compact 2010. Highlights and annual report; DESY kompakt 2010. Highlights und Jahresbericht

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-12-02

    The following topics are dealt with: DESY, DORIS, the synchrotron radiation source PETRA III, the FLASH free-electron laser, the European XFEL, new concepts for free-electron lasers, special electron sources, the relativistic electron gun REGAE for atomic explorations, research with photons at FLASH, DORIS III, and PETRA III, the center for free-electron laser science CFEL, nano- and material sciences, molecular biology, HERA, Helmholt-alliance, LHC experiments, R and D activities for the ILC, elementary-particle theory, astroparticle physics, the DESY-GRID center, the ALPS and OLYMPUS experiments, cooperation with the Hambuge University, technology transfer, cooperation with industry. (HSI)

  7. DESI focal plate mechanical integration and cooling

    Science.gov (United States)

    Lambert, A. R.; Besuner, R. W.; Claybaugh, T. M.; Silber, J. H.

    2016-08-01

    The Dark Energy Spectroscopic Instrument (DESI) is under construction to measure the expansion history of the Universe using the Baryon Acoustic Oscillation technique[1]. The spectra of 40 million galaxies over 14000 sq. deg will be measured during the life of the experiment. A new prime focus corrector for the KPNO Mayall telescope will deliver light to 5000 fiber optic positioners. The fibers in turn feed ten broad-band spectrographs. This paper describes the mechanical integration of the DESI focal plate and the thermal system design. The DESI focal plate is comprised of ten identical petal assemblies. Each petal contains 500 robotic fiber positioners. Each petal is a complete, self-contained unit, independent from the others, with integrated power supply, controllers, fiber routing, and cooling services. The major advantages of this scheme are: (1) supports installation and removal of complete petal assemblies in-situ, without disturbing the others, (2) component production, assembly stations, and test procedures are repeated and parallelizable, (3) a complete, full-scale prototype can be built and tested at an early date, (4) each production petal can be surveyed and tested as a complete unit, prior to integration, from the fiber tip at the focal surface to the fiber slit at the spectrograph. The ten petal assemblies will be installed in a single integration ring, which is mounted to the DESI corrector. The aluminum integration ring attaches to the steel corrector barrel via a flexured steel adapter, isolating the focal plate from differential thermal expansions. The plate scale will be kept stable by conductive cooling of the petal assembly. The guider and wavefront sensors (one per petal) will be convectively cooled by forced flow of air. Heat will be removed from the system at ten liquid-cooled cold plates, one per petal, operating at ambient temperature. The entire focal plate structure is enclosed in an insulating shroud, which serves as a thermal barrier

  8. The NAF: National analysis facility at DESY

    International Nuclear Information System (INIS)

    Haupt, Andreas; Kemp, Yves

    2010-01-01

    Within the framework of a broad collaboration among German particle physicists, the strategic Helmholtz Alliance P hysics a the Terascale , an analysis facility has been set up at DESY. The facility is intended to provide the best possible analysis infrastructure for researches of the ATLAS, CMS, LHCb and ILC experiments and also for theory researchers. In a first part of the contribution, we will present the concept of the NAF and its place in the existing distributed grid landscape of the experiments. In a second part, the building blocks of the NAF will be detailed with an emphasis on technical implementations of some parts: - Usage of VOMS for separating grid resources between collaboration-wide and NAF-specific resources. - interactive and batch cluster and integration with PROOF. - usage of grid proxies to access work group servers and AFS. - the usage and operation of Lustre for fast data access. A special focus is the seamless integration of the facility into the two geographically separated DESY sites and its implications. In a third part, the experience of running the facility for one year will be reported.

  9. DESY: HERA looks back, and forward

    International Nuclear Information System (INIS)

    Anon.

    1994-01-01

    The HERA electron-proton collider at the DESY Laboratory in Hamburg has completed a successful second year of operation, with achievements and progress so far promising well for 1994. The collider was commissioned in October 1991 and during the winter 1991-92 shutdown the two major experiments (H1 and ZEUS) were installed in the ring. HERA commissioning resumed in April 1992 and by the end of June the experiments had their first meals of electron-proton collisions. 1992 peak luminosity with nine colliding bunches in each ring was roughly 2x10 29 cm -2 s -1 . By the end of that year a total integrated luminosity of 58 nb -1 had been delivered to each of the experiments, with 25 nb -1 recorded

  10. After the first five years: central Linux support at DESY

    International Nuclear Information System (INIS)

    Knut Woller; Thorsten Kleinwort; Peter Jung

    2001-01-01

    The authors will describe how Linux is embedded into DESY's unix computing, their support concept and policies, tools used and developed, and the challenges which they are facing now that the number of supported PCs is rapidly approaching one thousand

  11. Integrated nutrients management for 'desi' cotton

    International Nuclear Information System (INIS)

    Qazi, M.A.; Akram, M.; Ahmad, N.; Khattak, M.A.

    2007-01-01

    Intensive cropping with no return of crop residues and other organic inputs result in the loss of soil organic matter (SOM) and nutrient supply in (Desi) cotton-wheat cropping system in Pakistan. For appraisal of problem and finding solution to sustainability, we evaluated six treatments comprised of two fertilizer doses and three management techniques over a period of three years (2003-05) monitoring their effects on seed cotton yield and soil fertility. The techniques included chemical fertilizers, municipal solid waste manure (MSWM) integrated with chemical fertilizers in 1:4 ratios with, and without pesticides. The results revealed that cotton yields. Were enhanced by 19% due to site-specific fertilizer dose over conventional dose. Ignoring weeds control by means of herbicided application resulted in 5% decrease of seed cotton yield in IPNM technique positive effect of MSWM integration was noted on soil test phosphorus and SOM. Site-specific fertilizer application and integrated plant nutrient management by MSWM proved their suitability as the techniques not only improve soil quality in terms of sustained levels of organic matter and phosphorus but also provide a safe way of waste disposal. (author)

  12. Hydroforming of Tesla Cavities at Desy

    International Nuclear Information System (INIS)

    Singer, W.; Kaiser, H.; Singer, X.; Gonin, I.; Zhelezov, I.; Khabibullin, T.; Kneisel, P.; Saito, K.

    2000-01-01

    Since several years the development of seamless niobium cavity fabrication by hydro forming is being pursued at DESY. This technique offers the possibility of lower cost of fabrication and perhaps better rf performance of the cavities because of the elimination of electron-beam welds, which in the standard fabrication technique have sometimes lead to inferior cavity performance due to defects. Several single cell 1300 MHz cavities have been formed from high purity seamless niobium tubes, which are under computer control expanded with internal pressure while simultaneously being swaged axially. The seamless tubes have been made by either back extrusion and flow forming or by spinning or deep drawing. Standard surface treatment techniques such as high temperature post purification, buffered chemical polishing (BCP), electropolishing (EP) and high pressure ultra pure water rinsing (HPR) have been applied to these cavities. The cavities exhibited high Q - values of 2 x 10 10 at 2K and residual resistances as low as 3 n(Omega) after the removal of a surface layer of app. 100 (micro)m by BCP. Surprisingly, even at high gradients up to the maximum measured values of E acc ∼ 33 MV/m the Q-value did not decrease in the absence of field emission as often observed. After electropolishing of additional 100 (micro)m one of the cavities reached an accelerating gradient of E acc (ge) 42 MV/m

  13. DESY III, the new proton injector for HERA

    International Nuclear Information System (INIS)

    Hemmie, G.; Maidment, J.R.

    1987-01-01

    The design of a 7.5 GeV/c proton synchrotron, DESY III, which will form part of the injector chain for HERA /1/ is described. Features of the latice and brief details of sub-systems are presented. A selection of parameters and expected time schedule for the accelerator which is at present under construction at the DESY laboratory, Hamburg, are given

  14. Location for new research facility determined X-ray laser XFEL to be realized in the federal states of Hamburg and Schleswig-Holstein starting in 2006

    CERN Multimedia

    2003-01-01

    "...The site for the XFEL has now been determined by the research center DESY (Deutsches Elektronen-Synchrotron); it was announced today at a press conference in Hamburg. The 3.3-kilometer-long facility is to be located in the federal states of Hamburg and Schleswig-Holstein. It will begin on the DESY site in Hamburg-Bahrenfeld and run in a north-western direction to the town of Schenefeld (district of Pinneberg), which borders on Hamburg" (1 page).

  15. DESY in 2012: A year of light and dust

    CERN Multimedia

    Frank Lehner

    2012-01-01

    While 2011 will go down in history as the construction year at DESY, there might even be more of it in 2012. The construction activities will spread across the entire DESY campus and will go from mere digging in the dirt to high-tech installations.   Location of the DORIS III and PETRA III storage rings, the two free-electron laser FLASH, and the planned position of the European XFEL accelerator tunnel. Copyright: DESY 2010. The 2-kilometre-long accelerator tunnel of the European XFEL and the injector building on the DESY campus are ready, and will be technically equipped and prepared for the accelerator installation. The first accelerator modules will not be put in place before 2013, but a new module test hall will soon become operational and is expecting its first pre-series cavities and modules. FLASH II is another impressive construction site on the DESY premises. The area around FLASH, the free-electron laser for so...

  16. DESY in 2012: A year of light and dust

    CERN Multimedia

    Frank Lehner

    2011-01-01

    While 2011 will go down in history as the construction year at DESY, there might even be more of it in 2012. The construction activities will spread across the entire DESY campus and will go from mere digging in the dirt to high-tech installations.   Location of the DORIS III and PETRA III storage rings, the two free-electron laser FLASH, and the planned position of the European XFEL accelerator tunnel. Copyright: DESY 2010. The 2-kilometre-long accelerator tunnel of the European XFEL and the injector building on the DESY campus are ready, and will be technically equipped and prepared for the accelerator installation. The first accelerator modules will not be put in place before 2013, but a new module test hall will soon become operational and is expecting its first pre-series cavities and modules. FLASH II is another impressive construction site on the DESY premises. The area around FLASH, the free-electron laser for so...

  17. Scientific annual report 1972

    International Nuclear Information System (INIS)

    This is a report on scientific research at DESY in 1972. The activities in the field of electron-nucleon scattering, photoproduction and synchrotron radiation get a special mention. It is also reported on the work on the double storage ring as well as on the extension to the synchrotron. (WL/LN) [de

  18. Scientific annual report 1973

    International Nuclear Information System (INIS)

    A report is given on the scientific research at DESY in 1973, which included the first storage of electrons in the double storage ring DORIS. Also mentioned are the two large spectrometers PLUTO and DASP, and experiments relating to elementary particles, synchrotron radiation, and the improvement of the equipment are described. (WL/AK) [de

  19. Photon tagging; considerations for an ELFE DESY proposal

    International Nuclear Information System (INIS)

    Mackenzie, J.A.

    1996-01-01

    Photon Tagging in the 5-15 GeV region is considered. The advantage of performing exclusive measurements in relation to obtainable photon flux in described. Finally some technical problems in relation to implementing a photon beam in the framework of the ELFE at DESY proposal are discussed. (author)

  20. Synchrotron radiation facilities at DESY, a status report

    International Nuclear Information System (INIS)

    Koch, E.E.

    1979-12-01

    A short summary of the developments which have led to the present extensive use of Synchrotron Radiation at DESY is presented and a description of the Synchrotron Radiation facilities presently available and under development is given with emphasis on the new HASYLAB project at the storage ring DORIS. (orig.) 891 HSI/orig. 892 MKO

  1. Nutritional evaluation of kabuli and desi type chickpeas (cicer ...

    African Journals Online (AJOL)

    STORAGESEVER

    2008-08-18

    Aug 18, 2008 ... value of kabuli and desi type chickpeas using in vitro gas production technique in sheep. ... India Mexico, Morocco, Myanmar, Pakistan, Spain, Syria,. Tanzania, Tunisia ... contains 29% protein, 59% carbohydrate, 3% fiber, 5% oil ... production data were fitted to the model of Orskov and McDonald. (1979).

  2. DESY: All superconducting magnets in place for HERA

    International Nuclear Information System (INIS)

    Anon.

    1990-01-01

    On 19 September the last of the 646 superconducting magnets for the proton ring of the HERA electron-proton collider was placed in position in the 6.4 kilometre tunnel at the German DESY Laboratory in Hamburg. The different sections of the cryogenic ring are being cooled down, and all magnet connections should be complete by 8 November for the official ceremony marking the end of HERA construction and installation

  3. Active filter for the DESY III dipole circuit

    International Nuclear Information System (INIS)

    Bothe, W.

    1991-01-01

    The DESY 3 dipole circuit is now operated in a ramp mode cycle with 3.6 s repetition rate. Excitation is done by a 12-pulse thyristor converter, followed by a passive filter. The existing current control could be improved by addition of an active filter. The use of a more efficient passive filter reduces the size of the active filter and does not deteriorate the dynamic behavior. The design of the control loops and the results of the simulation are presented

  4. Modulators for the S-band test linac at DESY

    Science.gov (United States)

    Bieler, M.; Choroba, S.; Hameister, J.; Lewin, H.-Ch.

    1995-07-01

    The development of adequate modulators for high peak power klystrons is one of the focus points for linear collider R&D programs. For the DESY/THD S-band linear collider study 150 MW rf-pulse power at 50 Hz repetition rate and 3 μs pulse duration is required [1]. Two different modulator schemes are under investigation. One is the conventional line type pulser, using a pulse forming network and a step up transformer, the other one is a hard tube pulser, using a dc power source at the full klystron voltage and a switch tube. This paper is focused on the modulator development for the S-band Test Linac at DESY. After a short overview over the test linac and a brief description of the 150 MW S-band klystron the circuitry of the line type pulse (LTP) is given. A hard tube pulser (HTP), which switches the high voltage directly from a storage capacitor to the klystron, has been built up at DESY. Circuitry and the results of the commissioning of the switch tube are reported.

  5. The luminosity monitor of the HERMES experiment at DESY

    CERN Document Server

    Benisch, T; Devitsin, E G; Kozlov, V; Potashov, S Yu; Rith, K; Terkulov, A R; Weiskopf, C

    2001-01-01

    A detector is described which measures the luminosity of the HERMES experiment at DESY. It is based on the coincident detection of electron-positron and photon pairs, or electron pairs, originating from the interaction of the beam positrons, or electrons, with the electrons of the atomic gas target. It consists of two calorimeters with radiation hard NaBi(WO sub 4) sub 2 crystals. Properties of the monitor, investigated in an electron test beam, and its performance in the experiment are presented.

  6. Open day an enormous success more than 15 000 visitors came to DESY

    CERN Document Server

    2003-01-01

    "More than 15 000 visitors seized the opportunity to look behind the scenes at the Helmholtz research center DESY. Around 600 DESY employees were in action to present "their" research center, answer questions and care for the welfare of their guests" (1 page).

  7. ProtoDESI: First On-Sky Technology Demonstration for the Dark Energy Spectroscopic Instrument

    Science.gov (United States)

    Fagrelius, Parker; Abareshi, Behzad; Allen, Lori; Ballester, Otger; Baltay, Charles; Besuner, Robert; Buckley-Geer, Elizabeth; Butler, Karen; Cardiel, Laia; Dey, Arjun; Duan, Yutong; Elliott, Ann; Emmet, William; Gershkovich, Irena; Honscheid, Klaus; Illa, Jose M.; Jimenez, Jorge; Joyce, Richard; Karcher, Armin; Kent, Stephen; Lambert, Andrew; Lampton, Michael; Levi, Michael; Manser, Christopher; Marshall, Robert; Martini, Paul; Paat, Anthony; Probst, Ronald; Rabinowitz, David; Reil, Kevin; Robertson, Amy; Rockosi, Connie; Schlegel, David; Schubnell, Michael; Serrano, Santiago; Silber, Joseph; Soto, Christian; Sprayberry, David; Summers, David; Tarlé, Greg; Weaver, Benjamin A.

    2018-02-01

    The Dark Energy Spectroscopic Instrument (DESI) is under construction to measure the expansion history of the universe using the baryon acoustic oscillations technique. The spectra of 35 million galaxies and quasars over 14,000 square degrees will be measured during a 5-year survey. A new prime focus corrector for the Mayall telescope at Kitt Peak National Observatory will deliver light to 5,000 individually targeted fiber-fed robotic positioners. The fibers in turn feed ten broadband multi-object spectrographs. We describe the ProtoDESI experiment, that was installed and commissioned on the 4-m Mayall telescope from 2016 August 14 to September 30. ProtoDESI was an on-sky technology demonstration with the goal to reduce technical risks associated with aligning optical fibers with targets using robotic fiber positioners and maintaining the stability required to operate DESI. The ProtoDESI prime focus instrument, consisting of three fiber positioners, illuminated fiducials, and a guide camera, was installed behind the existing Mosaic corrector on the Mayall telescope. A fiber view camera was mounted in the Cassegrain cage of the telescope and provided feedback metrology for positioning the fibers. ProtoDESI also provided a platform for early integration of hardware with the DESI Instrument Control System that controls the subsystems, provides communication with the Telescope Control System, and collects instrument telemetry data. Lacking a spectrograph, ProtoDESI monitored the output of the fibers using a fiber photometry camera mounted on the prime focus instrument. ProtoDESI was successful in acquiring targets with the robotically positioned fibers and demonstrated that the DESI guiding requirements can be met.

  8. Summary and Conclusions of the First DESY Test Beam User Workshop arXiv

    CERN Document Server

    Arling, Jan-Hendrik; Bandiera, Laura; Behnke, Ties; Dannheim, Dominik; Diener, Ralf; Dreyling-Eschweiler, Jan; Ehrlichmann, Heiko; Gerbershagen, Andreas; Gregor, Ingrid-Maria; Hayrapetyan, Avetik; Kaminski, Jochen; Kroll, Jiri; Martinengo, Paolo; Meyners, Norbert; Müntz, Christian; Poley, Luise; Schwenker, Benjamin; Stanitzki, Marcel

    On October 5/6, 2017, DESY hosted the first DESY Test Beam User Workshop [1] which took place in Hamburg. Fifty participants from different user communities, ranging from LHC (ALICE, ATLAS, CMS, LHCb) to FAIR (CBM, PANDA), DUNE, Belle-II, future linear colliders (ILC, CLIC) and generic detector R&D presented their experiences with the DESY II Test Beam Facility, their concrete plans for the upcoming years and a first estimate of their needs for beam time in the long-term future beyond 2025. A special focus was also on additional improvements to the facility beyond its current capabilities.

  9. New storage ring at DESY's. HERA's realm in the shades. Pt. 2

    International Nuclear Information System (INIS)

    Habermann, A.

    1987-01-01

    The venture into the smallest dimensions of the microcosm requires gigantic machines. The HERA storage ring, due for completion in 1989, shall help the scientists at DESY in their venture into new realms of high-energy physics. (orig.) [de

  10. Molecular characterization of velogenic viscerotropic Ranikhet (Newcastle) disease virus from different outbreaks in desi chickens

    OpenAIRE

    Dhaygude, V. S.; Sawale, G. K.; Chawak, M. M.; Bulbule, N. R.; Moregaonkar, S. D.; Gavhane, D. S.

    2017-01-01

    Aim: Diagnosis of velogenic viscerotropic Ranikhet disease from six different flocks of desi chicken in and around Mumbai by gross and histopathological examination, isolation of virus and molecular methods. Materials and Methods: A total of 25 carcasses (varying between 2 and 6 carcasses from each flock) of six different flocks of adult desi chicken were subjected to necropsy examination for diagnosis of the disease during the span of a year (2014-2015). After thorough gross examination,...

  11. Lattice QCD calculations on commodity clusters at DESY

    International Nuclear Information System (INIS)

    Gellrich, A.; Pop, D.; Wegner, P.; Wittig, H.; Hasenbusch, M.; Jansen, K.

    2003-06-01

    Lattice Gauge Theory is an integral part of particle physics that requires high performance computing in the multi-Tflops regime. These requirements are motivated by the rich research program and the physics milestones to be reached by the lattice community. Over the last years the enormous gains in processor performance, memory bandwidth, and external I/O bandwidth for parallel applications have made commodity clusters exploiting PCs or workstations also suitable for large Lattice Gauge Theory applications. For more than one year two clusters have been operated at the two DESY sites in Hamburg and Zeuthen, consisting of 32 resp. 16 dual-CPU PCs, equipped with Intel Pentium 4 Xeon processors. Interconnection of the nodes is done by way of Myrinet. Linux was chosen as the operating system. In the course of the projects benchmark programs for architectural studies were developed. The performance of the Wilson-Dirac Operator (also in an even-odd preconditioned version) as the inner loop of the Lattice QCD (LQCD) algorithms plays the most important role in classifying the hardware basis to be used. Using the SIMD streaming extensions (SSE/SSE2) on Intel's Pentium 4 Xeon CPUs give promising results for both the single CPU and the parallel version. The parallel performance, in addition to the CPU power and the memory throughput, is nevertheless strongly influenced by the behavior of hardware components like the PC chip-set and the communication interfaces. The paper starts by giving a short explanation about the physics background and the motivation for using PC clusters for Lattice QCD. Subsequently, the concept, implementation, and operating experiences of the two clusters are discussed. Finally, the paper presents benchmark results and discusses comparisons to systems with different hardware components including Myrinet-, GigaBit-Ethernet-, and Infiniband-based interconnects. (orig.)

  12. Interobserver agreement in fusion status assessment after instrumental desis of the lower lumbar spine using 64-slice multidetector computed tomography

    DEFF Research Database (Denmark)

    Laoutliev, Borislav; Havsteen, Inger; Bech, Birthe Højlund

    2012-01-01

    Persistent lower back pain after instrumental posterolateral desis may arise from incomplete fusion. We investigate the impact of experience on interobserver agreement in fusion estimation.......Persistent lower back pain after instrumental posterolateral desis may arise from incomplete fusion. We investigate the impact of experience on interobserver agreement in fusion estimation....

  13. SLAC/DESY International Workshop on Interactions of Intense Sub-Picosecond X-Rays with Matter, Stanford, CA, January 23-24, 1997

    International Nuclear Information System (INIS)

    Tatchyn, Roman

    1998-01-01

    This is the proceedings volume of the 1997 SLAC/DESY International Workshop on Interactions of Intense Sub-picosecond X-Ray Pulses with Matter. The workshop theme evolved out of design and R and D studies, undertaken at SLAC, DESY, and elsewhere [1,2], of the new class of linac-driven X-Ray Free Electron Lasers (XRFELs) operating with photocathode-based, low-emittance electron beams in the Self-Amplified Spontaneous Emission (SASE) regime [3]. It can be noted that, following the conclusion of the workshop, funded design study reports on R and D facilities based on these novel sources have been completed and published by both laboratories [4,5]. Topical significance was imparted to the workshop agenda by a series of prior workshops organized to explore scientific and technological applications of linac driven XRFELs [6,7,8,9]. These served to highlight underlying concerns regarding the potential loading effects of the highly intense radiation pulses from this new class of light source on the instrumentation, samples, and experimental phenomena being considered. The primary objectives of the workshop were: (a) to provide tutorial overviews of existing theoretical, numerical, and experimental techniques in the study of interactions of intense, ultra-short radiation pulses with matter, and of their applicability to the parameter regimes of the SLAC and DESY XRFELs; (b) to discuss practical optics and instrumentation issues related to peak and average power density loading; (c) to identify and explore novel concepts and design approaches, with an emphasis on optical instrumentation and experimental physics; (d) to formulate independent or collaborative R and D programs and activities in the areas of theory, numerical simulation, and experimental physics relevant to the linac-driven XRFEL parameter regime

  14. GROWTH PERFORMANCE AND CARCASS CHARACTERISTICS AS INFLUENCED BY DIFFERENT VARIETIES OF DESI CHICKENS

    Directory of Open Access Journals (Sweden)

    A.W. Sahota, B. M. Bhatti and L. A. Akhtar

    2003-04-01

    Full Text Available This study was conducted to examine performance and carcass characteristics of different varieties of first generation Desi chickens. The parent Desi chickens were procured from different villages of Mianwali and Bhakkar districts of Punjab, Pakistan and were maintained at Poultry Research Institute, Rawalpindi. Nine hundred day-old chicks (of the first progeny, 300 each of black, dark brown and light brown colour, were obtained from this parent flock. The birds in each variety were divided into 3 equal replicates. They were maintained in 9 separate pens on deep litter under optima.l managemental conditions. The birds were fed ad-libitum a chick starter ration from day-old to 8 weeks and then subsequently a grower mash upto 12 weeks of age. The birds had free access to clean and fresh drinking water. The results showed significant (p<0.0 I variation in dressing percentage, shank and neck length and breast width between different varieties of Desi chickens, whereas, they differed non-significantly in growth rate and keel length. The light brown variety had significantly better dressing percentage, shank length and breast width than other two varieties. whereas neck length in both the brown varieties was significantly better than black Desi chickens. Both the brown varieties differed non-significantly from each other in neck length.

  15. SUSY signals at DESY HERA in the no-scale flipped SU(5) supergravity model

    Energy Technology Data Exchange (ETDEWEB)

    Lopez, J.L.; Nanopoulos, D.V.; Wang, X.; Zichichi, A. (Center for Theoretical Physics, Department of Physics, Texas A M University, College Station, Texas 77843-4242 (United States) Astroparticle Physics Group, Houston Advanced Research Center (HARC), The Woodlands, Texas 77381 (United States) CERN, Geneva (Switzerland))

    1993-11-01

    Sparticle production and detection at DESY HERA are studied within the recently proposed no-scale flipped SU(5) supergravity model. Among the various reaction channels that could lead to sparticle production at HERA, only the following are within its limit of sensitivity in this model: [ital e][sup [minus

  16. PLATELET AGGREGATION AND ANTI-INFLAMMATORY EFFECTS OF GARDEN PEA, DESI CHICKPEA AND KABULI CHICKPEA

    Czech Academy of Sciences Publication Activity Database

    ZIA-UL-HAQ, M.; ALI KHAN, B.; Landa, Přemysl; Kutil, Zsófia; AHMED, S.; QAYUM, M.; Ahmad, S.

    2012-01-01

    Roč. 69, č. 4 (2012), s. 707-711 ISSN 0001-6837 Institutional research plan: CEZ:AV0Z50380511 Keywords : platelet aggregation * Garden pea * Desi chickpea Subject RIV: EF - Botanics Impact factor: 0.665, year: 2012 http://home.ueb.cas.cz/publikace/2012_Haq_ACTA_POLONIAE_PHARMACEUTICA_707.pdf

  17. Brilliant research perspectives DESY's accelerator "PETRA" to become a most brilliant light source

    CERN Multimedia

    2003-01-01

    From 2007 onwards, the PETRA accelerator at the Helmholtz research center DESY will be converted into the most brilliant storage-ring-based X-ray source worldwide. Current plans envision 13 to 15 experimental stations, which will be equipped with so-called undulators: long magnet arrangements delivering X-ray radiation with especially high brilliance (1 page).

  18. The design and performance of 150-MW S-band klystrons

    International Nuclear Information System (INIS)

    Sprehn, D.; Phillips, R.M.; Caryotakis, G.

    1994-09-01

    As part of an international collaboration, the Stanford Linear Accelerator Center (SLAC) klystron group has designed, fabricated and tested a 60 Hz, 3 μs, 150 MW klystron built for Deutsches Elektronen Synchrotron (DESY). A test diode with a 535 kV, 700 A electron beam was constructed to verify the gun operation. The first klystron was built and successfully met design specifications. This paper discusses design issues and experimental results of the diode and klystron including the suppression of gun oscillations

  19. Synchrotron radiation

    CERN Document Server

    Kunz, C

    1974-01-01

    The production of synchrotron radiation as a by-product of circular high-energy electron (positron) accelerators or storage rings is briefly discussed. A listing of existing or planned synchrotron radiation laboratories is included. The following properties are discussed: spectrum, collimation, polarization, and intensity; a short comparison with other sources (lasers and X-ray tubes) is also given. The remainder of the paper describes the experimental installations at the Deutsches Elektronen-Synchrotron (DESY) and DORIS storage rings, presents a few typical examples out of the fields of atomic, molecular, and solid-state spectroscopy, and finishes with an outlook on the use of synchrotron radiation in molecular biology. (21 refs).

  20. Performance of 3.9 GHz SRF cavities at Fermilab's ILCTA_MDB nhorizontal test stand

    Energy Technology Data Exchange (ETDEWEB)

    Harms, Elvin; Hocker, Andy; /Fermilab

    2008-08-01

    Fermilab is building a cryomodule containing four 3.9 GHz superconducting radio frequency (SRF) cavities for the Free electron LASer in Hamburg (FLASH) facility at the Deutsches Elektronen-SYnchrotron (DESY) laboratory. Before assembling the cavities into the cryomodule, each individual cavity is tested at Fermilab's Horizontal Test Stand (HTS). The HTS provides the capability to test fully-dressed SRF cavities at 1.8 K with high-power pulsed RF in order to verify that the cavities achieve performance requirements under these conditions. The performance at the HTS of the 3.9 GHz cavities built for FLASH is presented here.

  1. Bus-based architectures in the H1 data acquisition system

    International Nuclear Information System (INIS)

    Haynes, W.J.

    1992-08-01

    The recently commissioned Hadron-Electron Ring Anage (HERA) electron-proton collider at DESY, Deutsches Elektronen Synchrotron has presented a challenging environment in coping with huge volumes of data in real-time. With bunch-crossing intervals of 96 nanoseconds, the H1 experiment can generate nearly 3 Megabytes of raw digital information from several hundred thousand electronic channels. The open VMEbus standard is exploited to provide the necessary modularity and system flexibility for embedding fast readout electronics in a multiprocessor design array. The architectural concepts of the data acquisition structure are discussed together with many of the experiences gained in implementing a large multi-crate system. (author)

  2. Design considerations and analysis of potential applications of a high power ultraviolet FEL at the TESLA test facility at DESY

    International Nuclear Information System (INIS)

    Pagani, C.; Saldin, E.L.; Schneidmiller, E.A.; Yurkov, M.V.

    1999-01-01

    A possibility of constructing a high power ultraviolet free electron laser at the TESLA test facility at DESY is discussed. The proposed facility consists of a tunable master oscillator (P av ∼10 mW, P peak ∼10 kW, λ≅200-350 nm) and an FEL amplifier with a tapered undulator. The average and peak radiation power at the exit of the FEL amplifier is about 7 kW and 220 GW, respectively. Installation of such a facility can significantly extend scientific potential of the TESLA test facility. The UV free electron laser can be used to construct a polarized, monochromatic gamma-source with the ultimate yield up to 10 12 gamma-quanta per second and the maximal energy of about 100 MeV. An intensive gamma-source can also form the base for constructing the test facility for the TESLA positron generation system. Another accelerator application of the proposed facility is verification of the main technical solutions for the laser and the optical system to be used in the gamma-gamma option of the TESLA collider. A high average power UV laser is also promising for industrial applications

  3. Processing Chains for Desis and Enmap Imaging Spectroscopy Data: Similarities and Differences

    Science.gov (United States)

    Storch, T.; Müller, R.

    2017-10-01

    The Earth Observation Center (EOC) of the German Aerospace Center (DLR) realizes operational processors for DESIS (DLR Earth Sensing Imaging Spectrometer) and EnMAP (Environmental Mapping and Analysis Program) high-resolution imaging spectroscopy remote sensing satellite missions. DESIS is planned to be launched in 2018 and EnMAP in 2020. The developmental (namely schedule, deployment, and team) and functional (namely processing levels, algorithms in processors, and archiving approaches) similarities and differences of the fully-automatic processors are analyzed. The processing chains generate high-quality standardized image products for users at different levels taking characterization and calibration data into account. EOC has long lasting experiences with the airborne and spaceborne acquisition, processing, and analysis of hyperspectral image data. It turns out that both activities strongly benefit from each other.

  4. The European X-ray Free Electron Laser Project at DESY

    CERN Document Server

    Schwarz, Andreas

    2004-01-01

    On February 5, 2003, the German Federal Ministry of Education and Research decided that the X-ray free-electron laser XFEL, proposed by the International TESLA Collaboration, should be realized as a European project and located at DESY/Hamburg. The ministry also announced that in view of the locational advantage, Germany is prepared to cover half of the investment and personnel costs for the XFEL. In the course of the last year work has concentrated on the following areas: setting up of an organizational structure at DESY for the preparation of the project, discussions with potential European partners on several levels, selection of a new site for the XFEL facility and the preparation of the 'plan approval procedure'. The present status of the technical layout of the Linear Accelerator, the SASE Undulator and Photon Beamlines and the experiment stations will be presented.

  5. Toward industrialization: Supporting the manufacturing processes of superconducting cavities at DESY

    International Nuclear Information System (INIS)

    Buerger, J.; Dammann, J.A.; Hagge, L.; Iversen, J.; Matheisen, A.; Singer, W.

    2006-01-01

    Manufacturing high-gradient superconducting cavities for future accelerators requires detailed knowledge of the entire production process. This knowledge has to be transferred from the laboratories, which are developing the process, to industry in order to achieve reproducible results in the industrial production of large numbers of cavities. The paper introduces DESY's approach to process industrialization based on the use of an engineering data management system (EDMS)

  6. An extraction of the skewing factor from DESY-HERA data

    International Nuclear Information System (INIS)

    Favart, Laurent; Machado, Magno V.T.; Schoeffel, Laurent

    2007-01-01

    In this contribution we present recent investigation on the extraction of the skewing factor, defined as the ratio of the imaginary parts of the amplitudes ImA (gamma * p → gamma * p) / ImA (gamma * p → gamma p). This factor is extracted from the data using the recent DVCS and the inclusive inelastic cross section measurements at DESY-HERA. We compare the results to the theoretical predictions for NLO QCD and the color dipole approach. (author)

  7. Analysis of personal care products on model skin surfaces using DESI and PADI ambient mass spectrometry.

    Science.gov (United States)

    Salter, Tara L; Green, Felicia M; Faruqui, Nilofar; Gilmore, Ian S

    2011-08-21

    Two ambient ionisation techniques, desorption electrospray ionisation (DESI) and plasma assisted desorption ionisation (PADI), have been used to analyse personal care products (PCPs) on fixed fibroblast cell surfaces. The similarities and differences between the two techniques for this type of analysis have been explored in various ways. Here, we show the results of DESI and PADI analysis of individual PCP ingredients as well as the analysis of these as complex creams on model skin surfaces, with minimal sample preparation. Typically, organosiloxanes and small molecules were detected from the creams. A study of the morphological damage of the fibroblast cells by the two ionisation techniques showed that for a less than 10% reduction in cell number, acquisition times should be limited to 5 s for PADI, which gives good signal levels; with DESI, the morphological damage was negligible. The operating parameters for the plasma source were optimised, and it was also found that the parameters could be modified to vary the relative intensity of different ions in the mass spectrum.

  8. The DESI Experiment Part I: Science,Targeting, and Survey Design

    Energy Technology Data Exchange (ETDEWEB)

    Aghamousa, Amir; et al.

    2016-10-31

    DESI (Dark Energy Spectroscopic Instrument) is a Stage IV ground-based dark energy experiment that will study baryon acoustic oscillations (BAO) and the growth of structure through redshift-space distortions with a wide-area galaxy and quasar redshift survey. To trace the underlying dark matter distribution, spectroscopic targets will be selected in four classes from imaging data. We will measure luminous red galaxies up to $z=1.0$. To probe the Universe out to even higher redshift, DESI will target bright [O II] emission line galaxies up to $z=1.7$. Quasars will be targeted both as direct tracers of the underlying dark matter distribution and, at higher redshifts ($ 2.1 < z < 3.5$), for the Ly-$\\alpha$ forest absorption features in their spectra, which will be used to trace the distribution of neutral hydrogen. When moonlight prevents efficient observations of the faint targets of the baseline survey, DESI will conduct a magnitude-limited Bright Galaxy Survey comprising approximately 10 million galaxies with a median $z\\approx 0.2$. In total, more than 30 million galaxy and quasar redshifts will be obtained to measure the BAO feature and determine the matter power spectrum, including redshift space distortions.

  9. An advanced draft genome assembly of a desi type chickpea (Cicer arietinum L.).

    Science.gov (United States)

    Parween, Sabiha; Nawaz, Kashif; Roy, Riti; Pole, Anil K; Venkata Suresh, B; Misra, Gopal; Jain, Mukesh; Yadav, Gitanjali; Parida, Swarup K; Tyagi, Akhilesh K; Bhatia, Sabhyata; Chattopadhyay, Debasis

    2015-08-11

    Chickpea (Cicer arietinum L.) is an important pulse legume crop. We previously reported a draft genome assembly of the desi chickpea cultivar ICC 4958. Here we report an advanced version of the ICC 4958 genome assembly (version 2.0) generated using additional sequence data and an improved genetic map. This resulted in 2.7-fold increase in the length of the pseudomolecules and substantial reduction of sequence gaps. The genome assembly covered more than 94% of the estimated gene space and predicted the presence of 30,257 protein-coding genes including 2230 and 133 genes encoding potential transcription factors (TF) and resistance gene homologs, respectively. Gene expression analysis identified several TF and chickpea-specific genes with tissue-specific expression and displayed functional diversification of the paralogous genes. Pairwise comparison of pseudomolecules in the desi (ICC 4958) and the earlier reported kabuli (CDC Frontier) chickpea assemblies showed an extensive local collinearity with incongruity in the placement of large sequence blocks along the linkage groups, apparently due to use of different genetic maps. Single nucleotide polymorphism (SNP)-based mining of intra-specific polymorphism identified more than four thousand SNPs differentiating a desi group and a kabuli group of chickpea genotypes.

  10. Differential response of kabuli and desi chickpea genotypes toward inoculation with PGPR in different soils

    Science.gov (United States)

    Imran, Asma; Mirza, Muhammad S.; Shah, Tariq M.; Malik, Kauser A.; Hafeez, Fauzia Y.

    2015-01-01

    Pakistan is among top three chickpea producing countries but the crop is usually grown on marginal lands without irrigation and fertilizer application which significantly hampers its yield. Soil fertility and inoculation with beneficial rhizobacteria play a key role in nodulation and yield of legumes. Four kabuli and six desi chickpea genotypes were, therefore, evaluated for inoculation response with IAA-producing Ochrobactrum ciceri Ca-34T and nitrogen fixing Mesorhizobium ciceri TAL-1148 in single and co-inoculation in two soils. The soil type 1 was previously unplanted marginal soil having low organic matter, P and N contents compared to soil type 2 which was a fertile routinely legume-cultivated soil. The effect of soil fertility status was pronounced and fertile soil on average, produced 31% more nodules, 62% more biomass and 111% grain yield than marginal soil. Inoculation either with O. ciceri alone or its co-inoculation with M. ciceri produced on average higher nodules (42%), biomass (31%), grains yield (64%) and harvest index (72%) in both chickpea genotypes over non-inoculated controls in both soils. Soil 1 showed maximum relative effectiveness of Ca-34T inoculation for kabuli genotypes while soil 2 showed for desi genotypes except B8/02. Desi genotype B8/02 in soil type 1 and Pb-2008 in soil type 2 showed significant yield increase as compared to respective un-inoculated controls. Across bacterial inoculation treatments, grain yield was positively correlated to growth and yield contributing parameters (r = 0.294* to 0.838*** for desi and r = 0.388* to 0.857** for kabuli). PCA and CAT-PCA analyses clearly showed a site-specific response of genotype x bacterial inoculation. Furthermore, the inoculated bacterial strains were able to persist in the rhizosphere showing colonization on root and within nodules. Present study shows that plant growth promoting rhizobacteria (PGPR) inoculation should be integrated with national chickpea breading program in

  11. Simulation of Particle Fluxes at the DESY-II Test Beam Facility

    International Nuclear Information System (INIS)

    Schuetz, Anne

    2015-05-01

    In the course of this Master's thesis ''Simulation of Particle Fluxes at the DESY-II Test Beam Facility'' the test beam generation for the DESY test beam line was studied in detail and simulated with the simulation software SLIC. SLIC uses the Geant4 toolkit for realistic Monte Carlo simulations of particles passing through detector material.After discussing the physics processes relevant for the test beam generation and the principles of the beam generation itself, the software used is introduced together with a description of the functionality of the Geant4 Monte Carlo simulation. The simulation of the test beam line follows the sequence of the test beam generation. Therefore, it starts with the simulation of the beam bunch of the synchrotron accelerator DESY-II, and proceeds step by step with the single test beam line components. An additional benefit of this thesis is the provision of particle flux and trajectory maps, which make fluxes directly visible by following the particle tracks through the simulated beam line. These maps allow us to see each of the test beam line components, because flux rates and directions change rapidly at these points. They will also guide the decision for placements of future test beam line components and measurement equipment.In the end, the beam energy and its spread, and the beam rate of the final test beam in the test beam area were studied in the simulation, so that the results can be compared to the measured beam parameters. The test beam simulation of this Master's thesis will serve as a key input for future test beam line improvements.

  12. Blotting Assisted by Heating and Solvent Extraction for DESI-MS Imaging

    Science.gov (United States)

    Cabral, Elaine C.; Mirabelli, Mario F.; Perez, Consuelo J.; Ifa, Demian R.

    2013-06-01

    Imprints of potato sprout ( Solanum tuberosum L.), gingko leaves (Gingko biloba L. ) and strawberries (Fragaria x ananassa Duch. ) were successfully imaged by desorption electrospray ionization mass spectrometry (DESI-MS) on TLC plates through blotting assisted by heating and/or solvent extraction. Ion images showing the distribution of significant compounds such as glycoalkaloid toxins in potato sprout, ginkgolic acids and flavonoids in ginkgo leaves, and sugars and anthocyanidin in strawberry were obtained. Practical implications of this work include analysis of a wide range of irregular or soft materials by different imprinting conditions without requiring the addition of matrices or use of specific kinds of surfaces.

  13. Improvement of cavity performance in the Saclay/Cornell/DESY's SC cavities

    International Nuclear Information System (INIS)

    Kako, E.; Noguchi, S.; Ono, M.

    2000-01-01

    Development of 1.3 GHz Nb superconducting cavities for TESLA (TeV Energy Superconducting Linear Collider) has been carried out with international collaboration. Three Saclay single-cell cavities, one Cornell two-cell cavity and one DESY nine-cell cavity were sent to KEK in order to compare the cavity performance. These cavities were tested at KEK after the following surface treatment: 1) high pressure rinsing, HPR, 2) chemical polishing and HPR, 3) electropolishing and HPR. The test results, especially, improvement of the cavity performance due to electropolishing are reported in this paper. (author)

  14. Wavefront propagation through the beamline designed for seeding the DESY XUV FEL

    CERN Document Server

    Reininger, R; Gürtler, P; Bahrdt, J

    2001-01-01

    A beamline designed to reduce the spectral bandwidth of the DESY XUV FEL is described. The beamline is intended to cover the wavelength range from 6.4 to 50 nm with three variable line spacing gratings. A plane mirror in front of the grating is used to maintain constant magnification in the dispersion direction. The electric field generated by the first undulator at three wavelengths, 6.4, 13, and 25 nm, is propagated through the beamline. The results show that the beamline has the resolution and imaging properties required for seeding the second undulator at these wavelengths.

  15. Preparatory procedure and equipment for the European x-ray free electron laser cavity implementation

    Directory of Open Access Journals (Sweden)

    D. Reschke

    2010-07-01

    Full Text Available The European x-ray free electron laser is under construction at Deutsches Elektronen-Synchrotron (DESY. The electron beam energy of up to 17.5 GeV will be achieved by using superconducting accelerator technology. Final prototyping, industrialization, and new infrastructure are the actual challenges with respect to the accelerating cavities. This paper describes the preparation strategy optimized for the cavity preparation procedure in industry. For the industrial fabrication and preparation, several new hardware components have been already developed at DESY. The design and construction of a semiautomated rf-measurement machine for dumbbells and end groups are described. In a collaboration among FNAL, KEK, and DESY, an automatic cavity tuning machine has been designed and four machines are under construction. The functionality of these machines with special attention to safety aspects is described in this paper. A new high pressure rinsing system has been developed and is operational.

  16. Desi Films: Articulating Images of South Asian Identity in a Global Communication Environment

    Directory of Open Access Journals (Sweden)

    Rekha Sharma

    2011-01-01

    Full Text Available Although India itself has been an important source of information about the Indian identity for Western audiences, a specialized genre of desi media have also garnered more recognition in recent years. Desi films—movies created by and/or for South Asian immigrants—are capable of reaching large numbers of people regardless of their educational level, economic status, or linguistic proficiency. Most are produced in English or with English subtitles and are easily accessible in most areas, either in theatres, video rental stores, libraries, or via Internet movie sites. This paper examines Indian diasporic films as a vehicle for cultural articulation and debate. First, it provides a theoretical foundation of hegemony and resistance with regard to notions of ethnicity and immigrants’ articulations of identity in interstitial zones. Second, it discusses sources of hegemony from Indian and Western media. Third, it explores the creation of a hybrid identity as reflected in Indian diasporic films, pointing out some of the themes and conventions of this emerging genre.

  17. The National Analysis Facility at DESY - status and use cases by the participating experiments

    Science.gov (United States)

    Aplin, S.; Ehrenfeld, W.; Haupt, A.; Kemp, Y.; Langenbruch, C.; Leffhalm, K.; Lucaci-Timoce, A.; Stadie, H.

    2011-12-01

    The German National Analysis Facility (NAF) was set up at DESY, starting end of 2007 in the context of the Helmholtz Alliance "Physics at the Terascale". The NAF complements the DESY and the German Grid resources, and hence offers users from the German HEP institutes the best possible environment for data analysis. In the first part, the key aspects and components of the NAF are briefly presented with an emphasis on recent improvements. In the second part, the use cases of the three participating LHC experiments, ATLAS, CMS and LHCb, will be presented. Differences and commonalities in the usage of the NAF will be shown. Special emphasis will be placed on the usage of PROOF, whose usage on the NAF has been pioneered by CMS. It is now adapted by ATLAS. The third part will concentrate on how the NAF was used for detector optimisation studies in the preparation of one of the ILC Lol's (ILD 2009), as well as how CALICE uses the NAF for the analysis of their data taken in several test beam experiments performed for detector R & D. Finally, future developments of the NAF are presented.

  18. The National Analysis Facility at DESY - status and use cases by the participating experiments

    International Nuclear Information System (INIS)

    Aplin, S; Ehrenfeld, W; Haupt, A; Kemp, Y; Leffhalm, K; Lucaci-Timoce, A; Langenbruch, C; Stadie, H

    2011-01-01

    The German National Analysis Facility (NAF) was set up at DESY, starting end of 2007 in the context of the Helmholtz Alliance 'Physics at the Terascale'. The NAF complements the DESY and the German Grid resources, and hence offers users from the German HEP institutes the best possible environment for data analysis. In the first part, the key aspects and components of the NAF are briefly presented with an emphasis on recent improvements. In the second part, the use cases of the three participating LHC experiments, ATLAS, CMS and LHCb, will be presented. Differences and commonalities in the usage of the NAF will be shown. Special emphasis will be placed on the usage of PROOF, whose usage on the NAF has been pioneered by CMS. It is now adapted by ATLAS. The third part will concentrate on how the NAF was used for detector optimisation studies in the preparation of one of the ILC Lol's (ILD 2009), as well as how CALICE uses the NAF for the analysis of their data taken in several test beam experiments performed for detector R and D. Finally, future developments of the NAF are presented.

  19. DESI and other Dark Energy experiments in the era of neutrino mass measurements

    Energy Technology Data Exchange (ETDEWEB)

    Font-Ribera, Andreu [Institute of Theoretical Physics, University of Zurich, Winterthurerstrasse 190, Zurich, 8057 (Switzerland); McDonald, Patrick; Mostek, Nick; Reid, Beth A.; Seo, Hee-Jong [Lawrence Berkeley National Laboratory, 1 Cyclotron Road, Berkeley, CA, 94720 (United States); Slosar, Anže, E-mail: afont@lbl.gov, E-mail: PVMcDonald@lbl.gov, E-mail: njmostek@lbl.gov, E-mail: BAReid@lbl.gov, E-mail: hee-jongseo@lbl.gov, E-mail: anze@bnl.gov [Brookhaven National Laboratory, Upton, NY, 11973 (United States)

    2014-05-01

    We present Fisher matrix projections for future cosmological parameter measurements, including neutrino masses, Dark Energy, curvature, modified gravity, the inflationary perturbation spectrum, non-Gaussianity, and dark radiation. We focus on DESI and generally redshift surveys (BOSS, HETDEX, eBOSS, Euclid, and WFIRST), but also include CMB (Planck) and weak gravitational lensing (DES and LSST) constraints. The goal is to present a consistent set of projections, for concrete experiments, which are otherwise scattered throughout many papers and proposals. We include neutrino mass as a free parameter in most projections, as it will inevitably be relevant — DESI and other experiments can measure the sum of neutrino masses to ∼ 0.02 eV or better, while the minimum possible sum is ∼ 0.06 eV. We note that constraints on Dark Energy are significantly degraded by the presence of neutrino mass uncertainty, especially when using galaxy clustering only as a probe of the BAO distance scale (because this introduces additional uncertainty in the background evolution after the CMB epoch). Using broadband galaxy power becomes relatively more powerful, and bigger gains are achieved by combining lensing survey constraints with redshift survey constraints. We do not try to be especially innovative, e.g., with complex treatments of potential systematic errors — these projections are intended as a straightforward baseline for comparison to more detailed analyses.

  20. water stress mediated changes in growth, physiology and secondary metabolites of desi ajwain (trachyspermum ammi l.)

    International Nuclear Information System (INIS)

    Azhar, N.; Hussain, B.; Abbasi, K.Y.

    2011-01-01

    Biotic and abiotic stresses exert a considerable influence on the production of several secondary metabolites in plants; water stress is one of the most important abiotic stress factors. This study was carried out to elucidate the effect of drought stress on growth, physiology and secondary metabolite production in desi ajwain (Trachyspermum ammi L.). Plants were grown in pots and three drought levels (100%, 80% and 60%) of field capacity were created. The experiment was laid out in complete randomized design (CRD) with three replicates. Data on growth, physiological and biochemical parameters were recorded and analyzed statistically. Physiological parameters like transpiration rate and stomatal conductance decreased concentration increased. The photosynthetic rate showed significantly with increasing water stress levels, but internal CO/sub 2/ non-significant reduction from 100% field capacity to 80% field capacity but increased at 60% field capacity. Growth parameters including plant height, herb fresh and dry weights were reduced significantly with increasing stress levels, while total phenolic contents and chlorophyll contents increased under water stress conditions. These results suggest that cultivation of medicinal plants like desi ajwain under drought stress could enhance the production of secondary metabolites. (author)

  1. SINBAD—The accelerator R&D facility under construction at DESY

    Energy Technology Data Exchange (ETDEWEB)

    Dorda, U., E-mail: ulrich.dorda@desy.de [DESY, Hamburg & Zeuthen (Germany); Assmann, R.; Brinkmann, R.; Flöttmann, K.; Hartl, I.; Hüning, M.; Kärtner, F.; Fallahi, A.; Marchetti, B.; Nie, Y.; Osterhoff, J.; Schlarb, H.; Zhu, J. [DESY, Hamburg & Zeuthen (Germany); Maier, A.R. [University Hamburg (Germany)

    2016-09-01

    The SINBAD facility (Short INnovative Bunches and Accelerators at DESY) is a long-term dedicated accelerator research and development facility currently under construction at DESY. It will be located in the premises of the old DORIS accelerator complex and host multiple independent experiments cost-effectively accessing the same central infrastructure like a central high power laser. With the removal of the old DORIS accelerator being completed, the refurbishment of the technical infrastructure is currently starting up. The presently ongoing conversion of the area into the SINBAD facility and the currently foreseen layout is described. The first experiment will use a compact S-band linac for the production of ultra-short bunches at hundred MeV. Once established, one of the main usages will be to externally inject electrons into a laser-driven plasma wakefield accelerator to boost the energy to GeV-level while maintaining a usable beam quality, ultimately aiming to drive an FEL. The second experiment already under planning is the setup of an attosecond radiation source with advanced technology. Further usage of the available space and infrastructure is revised and national and international collaborations are being established.

  2. 21 CFR 330.12 - Status of over-the-counter (OTC) drugs previously reviewed under the Drug Efficacy Study (DESI).

    Science.gov (United States)

    2010-04-01

    ... may also pertain to prescription drugs): (i) Certain Surgical Sutures (DESI 4725), published in the... filing of objections. (vi) Thorexin Cough Medicine (DESI 11160) for which a notice of opportunity for... following (the referenced document may also pertain to prescription drugs): (i) Certain Sulfonamide...

  3. Molecular characterization of velogenic viscerotropic Ranikhet (Newcastle) disease virus from different outbreaks in desi chickens.

    Science.gov (United States)

    Dhaygude, V S; Sawale, G K; Chawak, M M; Bulbule, N R; Moregaonkar, S D; Gavhane, D S

    2017-03-01

    Diagnosis of velogenic viscerotropic Ranikhet disease from six different flocks of desi chicken in and around Mumbai by gross and histopathological examination, isolation of virus and molecular methods. A total of 25 carcasses (varying between 2 and 6 carcasses from each flock) of six different flocks of adult desi chicken were subjected to necropsy examination for diagnosis of the disease during the span of a year (2014-2015). After thorough gross examination, the tissue samples were collected and processed for virus isolation and histopathological examination. The 20% tissue homogenate was inoculated into 9-day-old specific pathogen free (SPF) embryonated eggs. Mean death time (MDT) of embryos after inoculation and intracerebral pathogenicity index (ICPI) were used to judge velogenic nature of the virus. Newcastle disease virus (NDV) was isolated from six cases and confirmed by reverse transcriptase-polymerase chain reaction (RT-PCR) targeting the partial fusion protein gene of the viral genome. A total of 25 carcasses (varying between 2 and 6 carcasses from each flock) of six different flocks of desi chicken were presented for postmortem examination to Department of Veterinary Pathology, Bombay Veterinary College, Parel, Mumbai during 2014-2015. The gross and histopathological examination revealed lesions suggestive of viscerotropic velogenic form of the Newcastle disease (ND). The 20% tissue homogenate was inoculated into 9-day-old embryonated eggs from SPF chicken. NDV was isolated from six cases and confirmed by RT-PCR targeting the partial fusion protein gene. MDT of all the isolates was <60 h which indicated velogenic nature of the virus. ICPI of the isolates ranged between the 1.63 and 1.78. In four out of six outbreaks concurrent moderate to heavy infection of Ascardii galli in one flock and Railetina spp. in three flocks was also noted. In this study, viscerotropic velogenic form of ND was confirmed in all six outbreaks by gross and microscopic

  4. Molecular characterization of velogenic viscerotropic Ranikhet (Newcastle disease virus from different outbreaks in desi chickens

    Directory of Open Access Journals (Sweden)

    V. S. Dhaygude

    2017-03-01

    Full Text Available Aim: Diagnosis of velogenic viscerotropic Ranikhet disease from six different flocks of desi chicken in and around Mumbai by gross and histopathological examination, isolation of virus and molecular methods. Materials and Methods: A total of 25 carcasses (varying between 2 and 6 carcasses from each flock of six different flocks of adult desi chicken were subjected to necropsy examination for diagnosis of the disease during the span of a year (2014-2015. After thorough gross examination, the tissue samples were collected and processed for virus isolation and histopathological examination. The 20% tissue homogenate was inoculated into 9-day-old specific pathogen free (SPF embryonated eggs. Mean death time (MDT of embryos after inoculation and intracerebral pathogenicity index (ICPI were used to judge velogenic nature of the virus. Newcastle disease virus (NDV was isolated from six cases and confirmed by reverse transcriptase-polymerase chain reaction (RT-PCR targeting the partial fusion protein gene of the viral genome. Results: A total of 25 carcasses (varying between 2 and 6 carcasses from each flock of six different flocks of desi chicken were presented for postmortem examination to Department of Veterinary Pathology, Bombay Veterinary College, Parel, Mumbai during 2014-2015. The gross and histopathological examination revealed lesions suggestive of viscerotropic velogenic form of the Newcastle disease (ND. The 20% tissue homogenate was inoculated into 9-day-old embryonated eggs from SPF chicken. NDV was isolated from six cases and confirmed by RT-PCR targeting the partial fusion protein gene. MDT of all the isolates was <60 h which indicated velogenic nature of the virus. ICPI of the isolates ranged between the 1.63 and 1.78. In four out of six outbreaks concurrent moderate to heavy infection of Ascardii galli in one flock and Railetina spp. in three flocks was also noted. In this study, viscerotropic velogenic form of ND was confirmed in all

  5. Probing the structure of the virtual photon in the deep inelastic Compton process at the DESY HERA collider

    International Nuclear Information System (INIS)

    Krawczyk, M.; Zembrzuski, A.

    1998-01-01

    The sensitivity of deep inelastic Compton (DIC) scattering at DESY HERA to the structure of the virtual photon is discussed. It is demonstrated that the gluonic content of the virtual photon can be pinned down by measuring the photons with p T ∼5 GeV in the proton direction. copyright 1997 The American Physical Society

  6. Genetic and environmental factors contribute to variation in cell wall composition in mature desi chickpea (Cicer arietinum L.) cotyledons.

    Science.gov (United States)

    Wood, Jennifer A; Tan, Hwei-Ting; Collins, Helen M; Yap, Kuok; Khor, Shi Fang; Lim, Wai Li; Xing, Xiaohui; Bulone, Vincent; Burton, Rachel A; Fincher, Geoffrey B; Tucker, Matthew R

    2018-03-13

    Chickpea (Cicer arietinum L.) is an important nutritionally rich legume crop that is consumed worldwide. Prior to cooking, desi chickpea seeds are most often dehulled and cleaved to release the split cotyledons, referred to as dhal. Compositional variation between desi genotypes has a significant impact on nutritional quality and downstream processing, and this has been investigated mainly in terms of starch and protein content. Studies in pulses such as bean and lupin have also implicated cell wall polysaccharides in cooking time variation, but the underlying relationship between desi chickpea cotyledon composition and cooking performance remains unclear. Here, we utilized a variety of chemical and immunohistological assays to examine details of polysaccharide composition, structure, abundance, and location within the desi chickpea cotyledon. Pectic polysaccharides were the most abundant cell wall components, and differences in monosaccharide and glycosidic linkage content suggest both environmental and genetic factors contribute to cotyledon composition. Genotype-specific differences were identified in arabinan structure, pectin methylesterification, and calcium-mediated pectin dimerization. These differences were replicated in distinct field sites and suggest a potentially important role for cell wall polysaccharides and their underlying regulatory machinery in the control of cooking time in chickpea. © 2018 The Authors. Plant, Cell & Environment Published by John Wiley & Sons Ltd.

  7. Properties of hadronic final states in diffractive deep inelastic ep scattering at DESY HERA

    International Nuclear Information System (INIS)

    2002-01-01

    Characteristics of the hadronic final state of diffractive deep inelastic scattering events ep→eXp were studied in the kinematic range 4 X 2 2 , 70 P <0.03 with the ZEUS detector at the DESY ep collider HERA using an integrated luminosity of 13.8 pb-1. The events were tagged by identifying the diffractively scattered proton using the leading proton spectrometer. The properties of the hadronic final state X were studied in its center-of-mass frame using thrust, thrust angle, sphericity, energy flow, transverse energy flow, and 'seagull' distributions. As the invariant mass of the system increases, the final state becomes more collimated, more aligned, and more asymmetric in the average transverse momentum with respect to the direction of the virtual photon. Comparisons of the properties of the hadronic final state with predictions from various Monte Carlo model generators suggest that the final state is dominated by qq-barg states at the parton level

  8. Diffractive jet production in a simple model with applications to DESY HERA

    International Nuclear Information System (INIS)

    Berera, A.; Soper, D.E.

    1994-01-01

    In diffractive jet production, two high energy hardons A and B collide and produce high transverse momentum jets, while hadron A is diffractively scattered. Ingelman and Schlein predicted this phenomenon. In their model, part of the longitudinal momentum transferred from hadron A is delivered to the jet system, part is lost. Lossless diffractive jet production, in which all of this longitudinal momentum is delivered to the jet system, has been discussed by Collins, Frankfurt, and Strikman. We study the structure of lossless diffractive jet production in a simple model. The model suggests that the phenomenon can be probed experimentally at DESY HERA, with A being a proton and B being a bremsstrahlung photon with virtuality Q 2 . Lossless events should be present for small Q 2 , but not for Q 2 larger than 1/R P 2 , where R P is a characteristic size of the Pomeron

  9. Mitigating the impact of the DESI fiber assignment on galaxy clustering

    Energy Technology Data Exchange (ETDEWEB)

    Burden, Angela; Padmanabhan, Nikhil [Department of Physics, Yale University, New Haven, CT 06511 (United States); Cahn, Robert N.; White, Martin J. [Physics Division, Lawrence Berkeley National Laboratory, 1 Cyclotron Road, Berkeley, CA 94720 (United States); Samushia, Lado, E-mail: angela.burden@yale.edu, E-mail: nikhil.padmanabhan@yale.edu, E-mail: rncahn@lbl.gov, E-mail: mwhite@berkeley.edu, E-mail: lado@phys.ksu.edu [Physics Department, Kansas State University, 116 Cardwell Hall, 1228 N. 17th St. Manhattan, KS 66506 (United States)

    2017-03-01

    We present a simple strategy to mitigate the impact of an incomplete spectroscopic redshift galaxy sample as a result of fiber assignment and survey tiling. The method has been designed for the Dark Energy Spectroscopic Instrument (DESI) galaxy survey but may have applications beyond this. We propose a modification to the usual correlation function that nulls the almost purely angular modes affected by survey incompleteness due to fiber assignment. Predictions of this modified statistic can be calculated given a model of the two point correlation function. The new statistic can be computed with a slight modification to the data catalogues input to the standard correlation function code and does not incur any additional computational time. Finally we show that the spherically averaged baryon acoustic oscillation signal is not biased by the new statistic.

  10. Resolution Studies at Beam Position Monitors at the FLASH Facility at DESY

    Science.gov (United States)

    Baboi, N.; Lund-Nielsen, J.; Noelle, D.; Riesch, W.; Traber, T.; Kruse, J.; Wendt, M.

    2006-11-01

    More than 60 beam position monitors (BPM) are installed along about 350m of beamline of the Free Electron LASer in Hamburg (FLASH) at DESY. The room-temperature part of the accelerator is equipped mainly with stripline position monitors. In the accelerating cryo-modules there are cavity and re-entrant cavity BPMs, which will not be discussed here. In the undulator part of the machine button BPMs are used. This area requires a single bunch resolution of 10μm. The electronics is based on the AM/PM normalization principle and is externally triggered. Single-bunch position is measured. This paper presents the methods used to determine the resolution of the BPMs. The results based on correlations between different BPMs along the machine are compared to noise measurements in the RF lab. The performance and difficulties with the BPM design and the current electronics as well as its development are discussed.

  11. Lipid characterization of individual porcine oocytes by dual mode DESI-MS and data fusion

    International Nuclear Information System (INIS)

    Pirro, Valentina; Oliveri, Paolo; Ferreira, Christina Ramires; González-Serrano, Andrés Felipe; Machaty, Zoltan; Cooks, Robert Graham

    2014-01-01

    Highlights: • Repeated analysis by DESI(±)-MS of intact single oocytes for lipid characterization. • Deployment of a data fusion strategy to merge positive and negative ion mode data. • Enhanced interpretation of metabolic changes by more efficient analysis of spectral data. • Discovery of increased fatty acid metabolism and membrane complexity during maturation. • Assistance in the improvement of in vitro embryo production for porcine species. - Abstract: The development of sensitive measurements to analyze individual cells is of relevance to elucidate specialized roles or metabolic functions of each cell under physiological and pathological conditions. Lipids play multiple and critical roles in cellular functions and the application of analytical methods in the lipidomics area is of increasing interest. In this work, in vitro maturation of porcine oocytes was studied. Two independent sources of chemical information (represented by mass spectra in the positive and negative ion modes) from single oocytes (immature oocytes, 24-h and 44-h in vitro matured oocytes) were acquired by using desorption electrospray ionization-mass spectrometry (DESI-MS). Low and mid-level data fusion strategies are presented with the aim of better exploring the large amount of chemical information contained in the two mass spectrometric lipid profiles. Data were explored by principal component analysis (PCA) within the two multi-block approaches to include information on free fatty acids, phospholipids, cholesterol-related molecules, di- and triacylglycerols. After data fusion, clearer differences among immature and in vitro matured porcine oocytes were observed, which provide novel information regarding lipid metabolism throughout oocyte maturation. In particular, changes in TAG composition, as well as increase in fatty acid metabolism and membrane complexity were evidenced during the in vitro maturation process. This information can assist the improvement of in vitro embryo

  12. Comparative analysis of kabuli chickpea transcriptome with desi and wild chickpea provides a rich resource for development of functional markers.

    Directory of Open Access Journals (Sweden)

    Gaurav Agarwal

    Full Text Available Chickpea (Cicer arietinum L. is an important crop legume plant with high nutritional value. The transcriptomes of desi and wild chickpea have already been sequenced. In this study, we sequenced the transcriptome of kabuli chickpea, C. arietinum (genotype ICCV2, having higher commercial value, using GS-FLX Roche 454 and Illumina technologies. The assemblies of both Roche 454 and Illumina datasets were optimized using various assembly programs and parameters. The final optimized hybrid assembly generated 43,389 transcripts with an average length of 1065 bp and N50 length of 1653 bp representing 46.2 Mb of kabuli chickpea transcriptome. We identified a total of 5409 simple sequence repeats (SSRs in these transcript sequences. Among these, at least 130 and 493 SSRs were polymorphic with desi (ICC4958 and wild (PI489777 chickpea, respectively. In addition, a total of 1986 and 37,954 single nucleotide polymorphisms (SNPs were predicted in kabuli/desi and kabuli/wild genotypes, respectively. The SNP frequency was 0.043 SNP per kb for kabuli/desi and 0.821 SNP per kb for kabuli/wild, reflecting very low genetic diversity in chickpea. Further, SSRs and SNPs present in tissue-specific and transcription factor encoding transcripts have been identified. The experimental validation of a selected set of polymorphic SSRs and SNPs exhibited high intra-specific polymorphism potential between desi and kabuli chickpea, suggesting their utility in large-scale genotyping applications. The kabuli chickpea gene index assembled, and SSRs and SNPs identified in this study will serve as useful genomic resource for genetic improvement of chickpea.

  13. Monitoring Toxic Ionic Liquids in Zebrafish ( Danio rerio) with Desorption Electrospray Ionization Mass Spectrometry Imaging (DESI-MSI)

    Science.gov (United States)

    Perez, Consuelo J.; Tata, Alessandra; de Campos, Michel L.; Peng, Chun; Ifa, Demian R.

    2017-06-01

    Ambient mass spectrometry imaging has become an increasingly powerful technique for the direct analysis of biological tissues in the open environment with minimal sample preparation and fast analysis times. In this study, we introduce desorption electrospray ionization mass spectrometry imaging (DESI-MSI) as a novel, rapid, and sensitive approach to localize the accumulation of a mildly toxic ionic liquid (IL), AMMOENG 130 in zebrafish ( Danio rerio). The work demonstrates that DESI-MSI has the potential to rapidly monitor the accumulation of IL pollutants in aquatic organisms. AMMOENG 130 is a quaternary ammonium-based IL reported to be broadly used as a surfactant in commercialized detergents. It is known to exhibit acute toxicity to zebrafish causing extensive damage to gill secondary lamellae and increasing membrane permeability. Zebrafish were exposed to the IL in a static 96-h exposure study in concentrations near the LC50 of 1.25, 2.5, and 5.0 mg/L. DESI-MS analysis of zebrafish gills demonstrated the appearance of a dealkylated AMMOENG 130 metabolite in the lowest concentration of exposure identified by a high resolution hybrid LTQ-Orbitrap mass spectrometer as the trimethylstearylammonium ion, [C21H46N]+. With DESI-MSI, the accumulation of AMMOENG 130 and its dealkylated metabolite in zebrafish tissue was found in the nervous and respiratory systems. AMMOENG 130 and the metabolite were capable of penetrating the blood brain barrier of the fish with significant accumulation in the brain. Hence, we report for the first time the simultaneous characterization, distribution, and metabolism of a toxic IL in whole body zebrafish analyzed by DESI-MSI. This ambient mass spectrometry imaging technique shows great promise for the direct analysis of biological tissues to qualitatively monitor foreign, toxic, and persistent compounds in aquatic organisms from the environment. [Figure not available: see fulltext.

  14. DESI-MS imaging and NMR spectroscopy to investigate the influence of biodiesel in the structure of commercial rubbers.

    Science.gov (United States)

    Silva, Lorena M A; Alves Filho, Elenilson G; Simpson, André J; Monteiro, Marcos R; Cabral, Elaine; Ifa, Demian; Venâncio, Tiago

    2017-10-01

    Biodiesel has been introduced as an energetic matrix in several countries around the world. However, the affinity of biodiesel with the components of petrodiesel engines is a growing concern. In order to obtain information regarding the effect of biodiesel on the rubber structure, nuclear magnetic resonance technics under a new technology named as comprehensive multiphase (CMP NMR) and the imaging through desorption electrospray ionization mass spectrometry (DESI-MS imaging) were used. The 1 H CMP-DOSY NMR showed the entrapped fuel into the rubber cavities, which the higher constraint caused by the rubber structure is related to the smaller diffusion coefficient. The less affected type of rubber by biodiesel was ethylene-propylene-diene monomer (EPDM), and the most affected was synthetic rubber nitrile (NBR). The 13 C CMP MAS-SPE experiments also confirmed that the internal region of EPDM was less accessible to the biodiesel molecules (no fuels detected) while other rubbers were more susceptible to the penetration of the fuel. DESI-MS imaging revealed for the first time the topography of the rubbers exposed to fuels. The biodiesel molecules entrapped at the EPDM and NBR pores were in oxidized form, which might degrade the rubber structure at long exposure time. The employed technics enabled the study of dynamic and molecular structure of the mixing complex multiphase. The DOSY under CMP used in this study could prove helpful in assessing the interactions throughout all physical phases (liquid, solid, and gel or semi-solid) by observing swellability caused by the fuel in the rubber. In addition, the DESI-MS was especially valuable to detect the degradation products of biodiesel entangled at the rubber structure. In our knowledge, this was the first report in which chemical changes of commercial rubbers induced by biodiesel and petrodiesel were investigated by means of DESI-MS and DOSY NMR. Copyright © 2017 Elsevier B.V. All rights reserved.

  15. DESY: First physics from HERA; A wide gap; 30 Years of the HEP-Index

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    At the HERA collider at DESY, the dreams of electron-proton scattering experiments are becoming reality, with electron-proton collisions at an energy of about 300 GeV opening up new physics. Information about the distribution of quarks, antiquarks and gluons inside the proton can now be obtained with a precision never attained before. But there are many other reactions which could provide surprises at these energies. Collisions between HERA's 820 GeV protons and 26.7 GeV electrons started in June 1992. With a total of about 30 inverse nanobarns of integrated luminosity collected up to the winter shut-down (November 1992), the H1 and ZEUS experiments published results which gave a foretaste of things to come. As most electron-proton interactions take place through the exchange of a photon, this was the first reaction to be studied. When the scattered electron emerges at a very small angle, the mass of the exchanged virtual photon is close to zero and the photon nearly real. This opens up the study of photon proton collisions at energies in the region of 200 GeV. The total cross section for these reactions previously known up to 18 GeV collision energy was 118 micro barn, and was predicted to rise with energy

  16. Studies on a VUV free electron laser at the TESLA Test Facility at DESY

    Energy Technology Data Exchange (ETDEWEB)

    Rossbach, J. [Deutsches Elektronen-Synchrotron, Hamburg (Germany)

    1995-12-31

    The TESLA Test Facility (TTF) currently under construction at DESY is a test-bed for acceleration sections of a high-gradient, high efficiency superconducting linear collider. Due to ist unrivaled ability to sustain high beam quality during acceleration, a superconducting rf linac is considered the optimum choice to drive a Free Electron Laser (FEL). We aim at a photon wavelength of {lambda} = 6 manometer utilizing the TTF after is has been extended to 1 GeV beam energy. Due to lack of mirrors and seed-lasers in this wavelength regime, a single pass FEL and Self-Amplified-Spontaneous-Emission (SASE) is considered. A first test is foreseen at a larger photon wavelength. The overall design as well as both electron and photon beam properties will be discussed. To reach the desired photon wavelength, the main components that have to be added to the TTF are: (a) a low emittance rf gun including space charge compensation (b) a two stage bunch compressor increasing the peak bunch current from 100 A up to 2500 A (c) four more accelerating modules to achieve 1 GeV beam energy (d) a 25 m long undulator (period length 27 mm, peak field 0.5 T) The average brillance will be larger than 1-10{sup 22}photons/s/mm{sup 2}/mrad{sup 2}/0.1%. Each 800 {mu}s long pulse will contain up to 7200 equidistant bunches. The repetition frequency of the linac is 10 Hz.

  17. Studies for a silicon telescope to extend the magnet facility at the DESY test beam

    Energy Technology Data Exchange (ETDEWEB)

    Tsionou, Dimitra [Deutsches Elektronen-Synchrotron (DESY), Notkestrasse 85, 22607 Hamburg (Germany)

    2016-07-01

    The International Large Detector is a detector concept for the International Linear Collider (ILC) which uses a Time Projection Chamber (TPC) as its main tracking detector. Within the framework of the LCTPC collaboration, a large prototype (LP) TPC has been built as a demonstrator. The LP has been equipped with Micro-Pattern Gas Detector modules and studied with an electron beam (1-6 GeV) in a 1 Tesla magnetic field at DESY. To extend the capabilities of the test beam setup, an external silicon tracker to be installed inside the magnet will be discussed. The silicon detector will provide high precision space points in front and behind the TPC inside the magnet. It will provide reference tracks that will allow to determine the momentum of the tracks passing the TPC, and which will help in correcting for field distortion effects in the LPTPC volume. In order to meet these requirements, simulation studies have been performed to determine the layout of the system and have placed stringent requirements on the sensor spatial resolution of better than 10 μ m. These studies will be presented along with the hardware options under evaluation.

  18. The Coadministration of Unoxidized and Oxidized Desi Ghee Ameliorates the Toxic Effects of Thermally Oxidized Ghee in Rabbits

    Directory of Open Access Journals (Sweden)

    Alam Zeb

    2017-01-01

    Full Text Available Desi Ghee was thermally oxidized at 160°C for 9 h and characterized for peroxide value (PV, free fatty acid (FFA, thiobarbituric acid reactive substances (TBARS, radical scavenging activity (RSA, and fatty acid and cholesterol composition using GC-MS. Oxidized (OG and normal ghee (NG were fed to rabbits in different doses. Blood was collected for hematology and biochemical analyses after 7 and 14 days. The oxidation of desi ghee increased the PV, FFA, and TBARS values and showed a decline in the RSA values. GC-MS revealed that desi ghee was rich in saturated fatty acids (55.9 g/100 g and significant amounts of oleic acid (26.2 g/100 g. The OG significantly decreased the body weight, which was normalized by the coadministration of NG. Serum lipid profile showed a dose dependent increase in total cholesterol, triglycerides, and low density lipoproteins (LDL and decrease in RBCs count, hematocrit, glucose, and hemoglobin concentration with OG feeding. These parameters were normalized by coadministration of NG. Liver histopathology of OG fed groups showed bile duct dilation and necrotic changes, while normal architecture showed in NG groups, compared to control. These results indicate that NG has no significant effect on rabbits comparing with OG and that it was beneficial when coadministered with oxidized ghee.

  19. Effect of iron dextran injection on growth performance of crossbred and desi piglets under farm and village conditions

    Directory of Open Access Journals (Sweden)

    Raghuvir Ranjan

    Full Text Available Aim: To study the effect of iron dextran injection on growth performance of crossbred and desi piglets under farm and village conditions. Materials and Methods: The experiments were conducted in Pig Breeding Farm, Ranchi Veterinary College, Ranchi and different villages on crossbred and desi preweaned piglets. The piglets were divided into three treatment groups as T 1 (control, T2 (injected iron dextran @ 1 ml (50mg I/M twice at 3rd and 14th days of age and T3 (injected iron dextran @ 2 ml 2 3 (100mg I/M once at 3rd day of age. Results: The average body weight of crossbred piglets in farm condition of T1 , T2 and T3 groups at weaning (8 week were 7.162±0.365, 9.985±0.281 and 9.572±0.295 kg, respectively. The piglets of T2 group showed better performance over T3 and T1 groups in farm and village conditions on crossbred and desi piglets. Conclusion: On the basis of present findings it may be concluded that irondextran (50mg/ ml injection should be given to all piglets @ 1 ml I/M during preweaning period at 3rd and 14th day of age for better growth of piglets. [Vet World 2012; 5(10.000: 599-602

  20. Direct Visualization of Neurotransmitters in Rat Brain Slices by Desorption Electrospray Ionization Mass Spectrometry Imaging (DESI - MS)

    Science.gov (United States)

    Fernandes, Anna Maria A. P.; Vendramini, Pedro H.; Galaverna, Renan; Schwab, Nicolas V.; Alberici, Luciane C.; Augusti, Rodinei; Castilho, Roger F.; Eberlin, Marcos N.

    2016-12-01

    Mass spectrometry imaging (MSI) of neurotransmitters has so far been mainly performed by matrix-assisted laser desorption/ionization (MALDI) where derivatization reagents, deuterated matrix and/or high resolution, or tandem MS have been applied to circumvent problems with interfering ion peaks from matrix and from isobaric species. We herein describe the application of desorption electrospray ionization mass spectrometry imaging (DESI)-MSI in rat brain coronal and sagittal slices for direct spatial monitoring of neurotransmitters and choline with no need of derivatization reagents and/or deuterated materials. The amino acids γ-aminobutyric (GABA), glutamate, aspartate, serine, as well as acetylcholine, dopamine, and choline were successfully imaged using a commercial DESI source coupled to a hybrid quadrupole-Orbitrap mass spectrometer. The spatial distribution of the analyzed compounds in different brain regions was determined. We conclude that the ambient matrix-free DESI-MSI is suitable for neurotransmitter imaging and could be applied in studies that involve evaluation of imbalances in neurotransmitters levels.

  1. Imprint of DESI fiber assignment on the anisotropic power spectrum of emission line galaxies

    Energy Technology Data Exchange (ETDEWEB)

    Pinol, Lucas [Département de Physique, École Normale Supérieure, Paris (France); Cahn, Robert N. [Lawrence Berkeley National Laboratory, Berkeley, California (United States); Hand, Nick [Department of Astronomy, University of California, Berkeley, California (United States); Seljak, Uroš; White, Martin, E-mail: lucas.pinol@ens.fr, E-mail: rncahn@lbl.gov, E-mail: nhand@berkeley.edu, E-mail: useljak@berkeley.edu, E-mail: mwhite@berkeley.edu [Department of Physics, University of California, Berkeley, California (United States)

    2017-04-01

    The Dark Energy Spectroscopic Instrument (DESI), a multiplexed fiber-fed spectrograph, is a Stage-IV ground-based dark energy experiment aiming to measure redshifts for 29 million Emission-Line Galaxies (ELG), 4 million Luminous Red Galaxies (LRG), and 2 million Quasi-Stellar Objects (QSO). The survey design includes a pattern of tiling on the sky, the locations of the fiber positioners in the focal plane of the telescope, and an observation strategy determined by a fiber assignment algorithm that optimizes the allocation of fibers to targets. This strategy allows a given region to be covered on average five times for a five-year survey, with a typical variation of about 1.5 about the mean, which imprints a spatially-dependent pattern on the galaxy clustering. We investigate the systematic effects of the fiber assignment coverage on the anisotropic galaxy clustering of ELGs and show that, in the absence of any corrections, it leads to discrepancies of order ten percent on large scales for the power spectrum multipoles. We introduce a method where objects in a random catalog are assigned a coverage, and the mean density is separately computed for each coverage factor. We show that this method reduces, but does not eliminate the effect. We next investigate the angular dependence of the contaminated signal, arguing that it is mostly localized to purely transverse modes. We demonstrate that the cleanest way to remove the contaminating signal is to perform an analysis of the anisotropic power spectrum P ( k ,μ) and remove the lowest μ bin, leaving μ > 0 modes accurate at the few-percent level. Here, μ is the cosine of the angle between the line-of-sight and the direction of k-vector . We also investigate two alternative definitions of the random catalog and show that they are comparable but less effective than the coverage randoms method.

  2. Studies on the effectiveness of oral pellet vaccine in improving egg production and egg quality in desi chicken

    Directory of Open Access Journals (Sweden)

    T. Lurthu Reetha

    2016-08-01

    Full Text Available Aim: To study the effect of Newcastle disease (ND oral pellet vaccine in egg production and egg quality in desi chicken. Materials and Methods: The study was conducted at Veterinary University Training and Research Centre, Tiruchirapalli, Tamil Nadu. A total of 48-day-old desi chicks obtained from a private hatchery in Namakkal, Tamil Nadu, were maintained under cage system of rearing up to 52 weeks of age as per standard management practices. All the 48 chicks were divided into six groups having eight chicks in each group were subjected to different treatment regimes. All the birds were challenged at 52 weeks of age with 0.5 ml dose of 104.0 egg infectious dose 50 virulent ND field virus. 10 eggs from each group were randomly collected during the last 3 days of 8 weeks interval period from 28 to 52 weeks of age and were used to measure the egg quality parameters. The production performance of each group was assessed at 4 weeks interval period from 25 to 52 weeks of age. Results: In all the six treatment groups with respect to egg production, no significant difference (p≥0.05 was noticed from 25 to 52 weeks of age. Similarly, in egg weight, egg shape index and specific gravity, no significant difference (p≥0.05 was noticed from 28 to 52 weeks of age. Conclusion: From this study, it is concluded that the administration of ND oral pellet vaccine to desi chicken does not affect the egg production performance, egg weight, egg shape index, and specific gravity of egg.

  3. Studies on the effectiveness of oral pellet vaccine in improving egg production and egg quality in desi chicken.

    Science.gov (United States)

    Reetha, T Lurthu; Rajeswar, J Johnson; Harikrishnan, T J; Sukumar, K; Srinivasan, P; Kirubakaran, J John

    2016-08-01

    To study the effect of Newcastle disease (ND) oral pellet vaccine in egg production and egg quality in desi chicken. The study was conducted at Veterinary University Training and Research Centre, Tiruchirapalli, Tamil Nadu. A total of 48-day-old desi chicks obtained from a private hatchery in Namakkal, Tamil Nadu, were maintained under cage system of rearing up to 52 weeks of age as per standard management practices. All the 48 chicks were divided into six groups having eight chicks in each group were subjected to different treatment regimes. All the birds were challenged at 52 weeks of age with 0.5 ml dose of 10(4.0) egg infectious dose 50 virulent ND field virus. 10 eggs from each group were randomly collected during the last 3 days of 8 weeks interval period from 28 to 52 weeks of age and were used to measure the egg quality parameters. The production performance of each group was assessed at 4 weeks interval period from 25 to 52 weeks of age. In all the six treatment groups with respect to egg production, no significant difference (p≥0.05) was noticed from 25 to 52 weeks of age. Similarly, in egg weight, egg shape index and specific gravity, no significant difference (p≥0.05) was noticed from 28 to 52 weeks of age. From this study, it is concluded that the administration of ND oral pellet vaccine to desi chicken does not affect the egg production performance, egg weight, egg shape index, and specific gravity of egg.

  4. Statistical properties of SASE FEL radiation: experimental results from the VUV FEL at the TESLA test facility at DESY

    International Nuclear Information System (INIS)

    Yurkov, M.V.

    2002-01-01

    This paper presents an experimental study of the statistical properties of the radiation from a SASE FEL. The experiments were performed at the TESLA Test Facility VUV SASE FEL at DESY operating in a high-gain linear regime with a gain of about 10 6 . It is shown that fluctuations of the output radiation energy follows a gamma-distribution. We also measured for the first time the probability distribution of SASE radiation energy after a narrow-band monochromator. The experimental results are in good agreement with theoretical predictions, the energy fluctuations after the monochromator follow a negative exponential distribution

  5. "Loops and Legs in Quantum Field Theory", 12th DESY Workshop on Elementary Particle Physics

    Science.gov (United States)

    excellent working conditions. We would like to thank Martina Mende for all her work in helping to organize this conference. Details of the conference can be found under: https://indico.desy.de/conferenceDisplay.py?confId=8107

  6. Establishing a method for the design and maintenance of emergency evacuation plans based on the computer aided facility management (CAFM) at DESY

    International Nuclear Information System (INIS)

    Eucker, S.

    2005-12-01

    The present thesis describes a procedure for the design and maintenance of evacuation and rescue plans in a CAMF environment at the German Electron Synchrotron (DESY). The procedure is developed as business-process model and vizualized by the Unified Modelling Language (UML). The design of the evacuation and rescue plans and the technical design with a CAD software are presented. The introduction of the procedure pursues by the exemplary providing of a building with evacuation and rescue plans, Additionally safety informations of the evacuation and rescue plans are provided via the DESY Intranet. The termination of this thesis is the summarizing of the results and the experiences of the project as well as an outlook about future developments at DESY

  7. Limited Azithromycin Localization to Rabbit Meibomian Glands Revealed by LC-MS-Based Bioanalysis and DESI Imaging.

    Science.gov (United States)

    Asano, Nagayoshi; Wiseman, Justin Michael; Tsuji, Fumio; Kawazu, Kouichi

    2017-01-01

    Meibomian gland dysfunction (MGD) is the leading cause of dry eye, and although it affects approximately 4% of the population, treatment options remain limited. Topical azithromycin is one of the most promising pharmacological agents because of its multiple mechanisms of action and long sustainability. Azithromycin is frequently used as an off-label medication in the U.S. However, although azithromycin is presumed to act directly on meibomian gland cells, the mechanisms of action that contribute to its clinical efficacy remain unclear because no studies using a pharmacokinetic approach have been performed. Therefore, we aimed to clarify whether topical azithromycin reaches the meibomian glands sufficiently to generate a biological effect. We measured azithromycin concentrations in rabbit meibomian glands collected using a recently developed method. Moreover, we also visualized the azithromycin micro-distribution using desorption electrospray ionization (DESI) imaging. Azithromycin concentration in the meibomian glands reached only 0.8 µg/g tissue following a single application of a 1% azithromycin ophthalmic solution and was 1000-fold lower than the concentration in conjunctival epithelium. Similarly, no signal was observed in the meibomian glands on DESI images. Our results clearly demonstrated that topical azithromycin had limited access to the meibomian glands and was predominantly distributed in ocular surface tissues such as the palpebral conjunctiva and lid margins. These findings provide new insight into the clinical responses to topical azithromycin therapy and will aid in the further development of effective drugs with more suitable pharmacokinetic properties.

  8. DESI-MS2: a rapid and innovative method for trace analysis of six cytostatic drugs in health care setting.

    Science.gov (United States)

    Fabrizi, Giovanni; Fioretti, Marzia; Rocca, Lucia Mainero; Curini, Roberta

    2012-05-01

    With the aim of establishing exposure levels for hospital personnel preparing and administering cytostatic drugs (CDs), here, we present an innovative screening method based on the use of the desorption electrospray ionization (DESI) interface coupled with a hybrid quadrupole linear ion trap mass spectrometer. A rapid, simple, and sensitive procedure was developed for the simultaneous surface monitoring of cyclophosphamide, dacarbazine, methotrexate, vincristine, gemcitabine, and cytarabine. Since analytes were in the solid state, a novel approach based on the use of passive samplers was combined with the direct analysis of wipes. A PTFE-printed glass slide was used as a passive sampler, while hydrophobic centers of Swiffer® cloths were judged extremely efficient as wipe samplers. After the sampling period, the CD collectors were directly processed with the DESI-MS system without any further treatment. MS/MS confirmatory analysis was conducted using selected reaction monitoring in the positive ion mode and detection limits were evaluated. Values were at the picograms per square millimeter levels on the passive collector and at the picograms per square centimeter levels for the wipe ones. Direct determination on solid-state samples combined with mass spectrometry selectivity provided a powerful tool so far unapplied to occupational hygiene.

  9. Optimal germination condition impacts on the antioxidant activity and phenolic acids profile in pigmented desi chickpea (Cicer arietinum L.) seeds.

    Science.gov (United States)

    Domínguez-Arispuro, D M; Cuevas-Rodríguez, E O; Milán-Carrillo, J; León-López, L; Gutiérrez-Dorado, R; Reyes-Moreno, C

    2018-02-01

    Legume sprouts are considered natural, healthy products that provide a source of bioactive compounds to fight against chronic diseases. This study aims to identify the optimal germination temperature (GT) and germination time (Gt) to maximize total phenolic and flavonoid contents (TPC, FC), and antioxidant activity (AoxA) of desi chickpea. Response surface methodology was used as an optimization tool. An experimental design with two factors (GT and Gt) and five levels was used (13 treatments). The sprouts from each treatment were lyophilized, tempered, and milled to obtain germinated chickpea flours (GCF). To predict the phytochemicals composition and AoxA in GCF, regression models were developed. Maximum TPC, FC, and AoxA were attained during germination 33.7 °C for 171 h. Optimized germinated chickpea flour produced applying the optimal germination conditions resulted in an increase of protein and total dietary fibre content, TPC, FC, phenolic acids profile, and AoxA. Germination at optimal conditions also increased the level of coumaric, ferulic, synapic, ellagic, and syringic acids. This study demonstrated that germination carried out under optimal conditions enhanced the nutraceutical value of desi chickpea seeds.

  10. CAS CERN Accelerator School superconductivity in particle accelerators

    International Nuclear Information System (INIS)

    Turner, S.

    1989-01-01

    One of the objectives of the CERN Accelerator School is to run courses on specialised topics in the particle accelerator field. The present volume contains the proceedings of one such course, this time organized in conjunction with the Deutsches Elektronen Synchrotron (DESY) on the subject of superconductivity in particle accelerators. This course reflects the very considerable progress made over the last few years in the use of the technology for the magnet and radio-frequency systems of many large and small accelerators already in use or nearing completion, while also taking account of the development work now going on for future machines. The lectures cover the theory of superconductivity, cryogenics and accelerator magnets and cavities, while the seminars include superfluidity, superconductors, special magnets and the prospects for high-temperature superconductors. (orig.)

  11. Commissioning of an LED calibration and monitoring system for the prototype of a hadronic calorimeter

    Energy Technology Data Exchange (ETDEWEB)

    Wattimena, N.

    2006-12-15

    The anticipated physics program for the International Linear Collider (ILC) requires a highly granular hadronic calorimeter. One option for such a tracking calorimeter is a scintillator-steel sandwich structure placed inside the magnetic coil. The development of hadronic showers will be studied with a physics prototype, in order to improve current models. This prototype, currently being built within the collaboration for a CAlorimeter for the LInear Collider Experiment (CALICE) at the Deutsches Elektronen-Synchrotron (DESY) also serves to test a new semiconductor based photodetector the so called silicon photomultiplier. The calibration of these new photodetectors requires to take into account their nonlinear response.The response function, describing this behaviour, is investigated in this thesis. A calibration and monitoring system, needed to correct for the temperature and voltage dependence of the silicon photomultiplier signals and to observe changes of their response over time, is optimised and tested. (orig.)

  12. 150-MW S-Band klystron program at the Stanford Linear Accelerator Center

    Energy Technology Data Exchange (ETDEWEB)

    Sprehn, D.; Caryotakis, G.; Phillips, R.M. [Stanford Linear Accelerator Center, Stanford Univ., Stanford, CA (United States)

    1997-04-01

    Two S-Band klystrons operating at 150 MW have been designed, fabricated and tested at the Stanford Linear Accelerator Center (SLAC) during the past two years for use in an experimental accelerator at Deutsches Elektronen Synchrotron (DESY) in Hamburg, Germany. Both klystrons operate at the design power, 60 Hz repetition rate, 3 {mu}s pulsewidth, with an efficiency > 40%, and agreement between the experimental results and simulations is excellent. The 535 kV, 700 A electron gun was tested by constructing a solenoidal focused beam-stick which identified a source of oscillation, subsequently engineered out of the klystron guns. Design of the beam-stick and the two klystrons is discussed, along with observation and suppression of spurious oscillations. Differences in design and the resulting performance of the klystrons is emphasized. (author)

  13. Performance of a 150-MW S-band klystron

    International Nuclear Information System (INIS)

    Sprehn, D.; Phillips, R.M.; Caryotakis, G.

    1994-09-01

    As part of an international collaboration, the Stanford Linear Accelerator Center (SLAC) klystron group has designed, fabricated, and tested a 60-Hz, 3-μs, 150-MW S-band klystron built for Deutsches Elektronen Synchrotron (DESY). A test diode with a 535-kV, 700-A electron beam was constructed to verify the gun operation. The first klystron was built and successfully met design specifications. The 375-MW electron beam represents a new record for SLAC accelerator klystrons in terms of voltage, current, energy, and ruggedness of design. The rf output power is a 150% increase over the S-band tubes currently used in the two-mile-long linear accelerator at SLAC. This paper discusses design issues and experimental results of the diode and klystron

  14. A new measurement tool for characterization of superconducting rf accelerator cavities using high-performance LTS SQUIDs

    Energy Technology Data Exchange (ETDEWEB)

    Vodel, W [Friedrich-Schiller-University Jena, Helmholtzweg 5, 07743 Jena (Germany); Neubert, R [Friedrich-Schiller-University Jena, Helmholtzweg 5, 07743 Jena (Germany); Nietzsche, S [Friedrich-Schiller-University Jena, Helmholtzweg 5, 07743 Jena (Germany); Seidel, P [Friedrich-Schiller-University Jena, Helmholtzweg 5, 07743 Jena (Germany); Knaack, K [DESY Hamburg (Germany); Wittenburg, K [DESY Hamburg (Germany); Peters, A [Heidelberger Ionenstrahl-Therapiezentrum, Heidelberg (Germany)

    2007-11-15

    This paper presents a new system to measure very low currents in an accelerator environment, using a cryogenic current comparator (CCC). In principle a CCC is a conventional current transformer using the high-performance SQUID technology to sense the magnetic fields caused by the beam current. Since the system is sensitive on a pA level, it is an optimum device to detect dark currents of superconducting cavities. The system presented here is designed for the test facilities of the superconducting accelerator modules for the European XFEL at the Deutsches Elektronen-Synchrotron (DESY) in Hamburg. Measurements in a quiet environment showed that an intrinsic noise level of the CCC of 40 pA Hz{sup -1/2} could be achieved.

  15. The resonant wake field transformer (RWT)-collider

    International Nuclear Information System (INIS)

    Weiland, T.; Holtkamp, N.; Schuett, P.; Wanzenberg, R.

    1990-01-01

    Future e + e - Linear Colliders with center of mass energies of 2 TeV need average accelerating gradients of 100 MeV/m to be built within a length of 20 km. The gradients required by colliders at this energy range can be economically provided by resonant Wake Field Transformers. At the Wake Field Experiment at DESY (Deutsches Elektronen-Synchrotron) a 20 cm long transformer section was investigated and the most recent results are presented. The second part gives a short overview of the present status of research concerning the proposed next stage of a multibunch driver linac with superconducting cavities and long Wake Field Transformer sections. (author) 9 refs.; 5 figs.; 1 tab

  16. Commissioning of an LED calibration and monitoring system for the prototype of a hadronic calorimeter

    International Nuclear Information System (INIS)

    Wattimena, N.

    2006-12-01

    The anticipated physics program for the International Linear Collider (ILC) requires a highly granular hadronic calorimeter. One option for such a tracking calorimeter is a scintillator-steel sandwich structure placed inside the magnetic coil. The development of hadronic showers will be studied with a physics prototype, in order to improve current models. This prototype, currently being built within the collaboration for a CAlorimeter for the LInear Collider Experiment (CALICE) at the Deutsches Elektronen-Synchrotron (DESY) also serves to test a new semiconductor based photodetector the so called silicon photomultiplier. The calibration of these new photodetectors requires to take into account their nonlinear response.The response function, describing this behaviour, is investigated in this thesis. A calibration and monitoring system, needed to correct for the temperature and voltage dependence of the silicon photomultiplier signals and to observe changes of their response over time, is optimised and tested. (orig.)

  17. Fission and nuclear fragmentation of silver and bromine nuclei by photons of 1-6 GeV

    International Nuclear Information System (INIS)

    Pinheiro Filho, J.D.

    1983-01-01

    The studies of fission and fragmentation of silver and bromine nuclei by Bremsstrahlung photons of 1.6 GeV energy range are presented. The Il ford-KO nuclear emulsion submitted to Bremsstrahlung beams in Deutsches Elektronen Synchrotron (DESY) with total doses of 10'' equivalent photons, was used for nuclear fragment detection. The discrimination of fission and fragmentation events was done analysing angular distribution, range and angles between fragments. The results of fragment range distributions, angular distributions, distributions of angles between fragments, distributions of ratio between range, velocity distributions forward/backward ratio, cross sections of fission and fragmentation, nuclear fissionability and ternary fission frequency are presented and discussed. (M.C.K.)

  18. Methodological issues in protein and lipidic expressions in brain tissue exposed to Co60 based on DESI/MALDI-MS

    International Nuclear Information System (INIS)

    Soares, Matheus F.; Campos, Tarcísio P.R.; Augusti, Rodinei; Eberlin, Marcos N.; Vendramini, Pedro H.

    2017-01-01

    The present paper attempts to present some issues in the methodology of identifying lipid and protein changes in brain tissue induced by radiation. The goal was to address the analysis of the methodology and to investigate the feasibility of the generation of lipid/protein profiles of irradiated brain tissue, in order to identify radioinduced changes. Lipids and proteins are biomolecules with diverse structures and functionalities that participate in important intracellular processes. Changes in the lipid and the tissue protein profiles may indicate a cellular response to an external stimulus as well as the emergence of neoplasms or neurodegenerative diseases such as Alzheimer's. DESI-MS is a convenient method for identifying lipids and their spatial distribution in tissue beyond analytical quantification. DESI-MS allows the creation of an image of several low lipid m/z classes. MALDI-MS has already been a method used in the study of macromolecules as structural, membrane, hormone, neuromediator and immunological peptides. Through a full-scan matrix scan, with a m/z spectrum between 500-1000 for lipids and with a mass spectrum of 1000-15000 Da for proteins, the molecular profile can be analyzed. Generated pixel shape 2D chemical image. The produced image allows to associate the tissue distribution of the lipids and proteins with their chemical profile identified, allowing the verification of the changes radioinduced. Radiation triggers intense oxidative stress by increasing reactive oxygen species (ROS) and free radicals, causing DNA damage with consequent alterations in proteomics and cellular lipid explaining such changes in the lipid and protein expressions. The cellular morphophysiological changes are responsible for both the clonogenic inhibition and the induction of the apoptotic process. The images's production was directly dependent on the rigorous execution of the methodological procedures. Innumerable interferences could impair the image

  19. Effect of fermented bamboo shoot on the quality and shelf life of nuggets prepared from desi spent hen

    Directory of Open Access Journals (Sweden)

    Ankur Das

    Full Text Available Aim: An investigation was carried out to prepare nuggets from the relatively tough and fibrous meat of desi spent hen using fermented bamboo shoot as a phytopreservative in order to enhance the physico-chemical, microbiological and keeping quality of the nuggets. Materials and Methods: Lean meat of desi spent hen was minced and blended along with other non-meat ingredients and fermented bamboo shoot @10%. The emulsion was filled in metallic moulds and steam cooked and cut into pieces. Ready-toeat nuggets thus prepared were packed in sterilized LDPE zip bags and stored at 4±1°C up-to 15 days for quality evaluation. Emulsion stability (%, cooking yield (%, a and proximate composition were studied on the day of preparation, while estimation of pH, TBA values, microbial load and sensory evaluation were carried out at 5 days interval and up-to 15th day of storage. Results: The emulsion stability (%, cooking yield (%, moisture (%, crude protein (% and total ash (% of FBS treated nuggets differed significantly (p<0.01 from the control products. Storage studies revealed significantly lower (p<0.01 pH, TBA value, total plate count, psychrophillic count and counts for yeast and moulds in FBS treated nuggets in comparison to control products. Both control and treated nuggets exhibited gradual loss of panel ratings during the storage period (4±1°C for 15 days, however, nuggets containing fermented bamboo shoot revealed significantly higher (p<0.01 mean sensory scores in terms of flavour, texture, juiciness and overall acceptability. Conclusion: Nuggets with better physico-chemical and shelf life can be prepared with incorporation of fermented bamboo shoot @10% (w/w to the nugget emulsion. [Vet World 2013; 6(7.000: 419-423

  20. INSPIRE: A new scientific information system for HEP

    International Nuclear Information System (INIS)

    Ivanov, R; Raae, L

    2010-01-01

    The status of high-energy physics (HEP) information systems has been jointly analyzed by the libraries of CERN, DESY, Fermilab and SLAC. As a result, the four laboratories have started the INSPIRE project - a new platform built by moving the successful SPIRES features and content, curated at DESY, Fermilab and SLAC, into the open-source CDS Invenio digital library software that was developed at CERN. INSPIRE will integrate current acquisition workflows and databases to host the entire body of the HEP literature (about one million records), aiming to become the reference HEP scientific information platform worldwide. It will provide users with fast access to full text journal articles and preprints, but also material such as conference slides and multimedia. INSPIRE will empower scientists with new tools to discover and access the results most relevant to their research, enable novel text- and data-mining applications, and deploy new metrics to assess the impact of articles and authors. In addition, it will introduce the 'Web 2.0' paradigm of user-enriched content in the domain of sciences, with community-based approaches to scientific publishing. INSPIRE represents a natural evolution of scholarly communication built on successful community-based information systems, and it provides a vision for information management in other fields of science. Inspired by the needs of HEP, we hope that the INSPIRE project will be inspiring for other communities.

  1. Preliminary Report: DESiGN and Test Result of KSR-3 Rocket Magnetometers

    Directory of Open Access Journals (Sweden)

    Hyo-Min Kim

    2000-12-01

    Full Text Available The solar wind contributes to the formation of unique space environment called the Earth's magnetosphere by various interactions with the Earth's magnetic field. Thus the solar-terrestrial environment affects the Earth's magnetic field, which can be observed with an instrument for the magnetic field measurement, the magnetometer usually mounted on the rocket and the satellite and based on the ground observatory. The magnetometer is a useful instrument for the spacecraft attitude control as well as the Earth's magnetic field measurements for a scientific purpose. In this paper, we present the preliminary design and test results of the two onboard magnetometers of KARI's (Korea Aerospace Research Institute sounding rocket, KSR-3, which will be launched four times during the period of 2001-02. The KSR-3 magnetometers consist of the fluxgate magnetometer, MAG/AIM (Attitude Information Magnetometer for acquiring the rocket flight attitude information, and of the search-coil magnetometer, MAG/SIM (Scientific Investigation Magnetometer for the observation of the Earth's magnetic field fluctuations. With the MAG/AIM, the 3-axis attitude information can be acquired by the comparison of the resulting dc magnetic vector field with the IGRF (International Geomagnetic Reference Field. The Earth's magnetic field fluctuations ranging from 10 to 1,000 Hz can also be observed with the MAG/SIM measurement.

  2. Department of Nuclear Reactions - Overview

    International Nuclear Information System (INIS)

    Marianski, B.

    2010-01-01

    Full text: Our scientific activities in 2009 concentrated on four subjects: low energy nuclear physics, high energy nuclear physics, materials science and applications. · Low energy nuclear physics experiments were continued at the Heavy Ion Laboratory of Warsaw University in collaboration with foreign institutions: University of Jyvaskyla, Institute of Nuclear Research of the Ukrainian Academy of Science and Institut de Recherches Subatomique in Strasbourg. Dr Eryk Piasecki was nominated to full professor. · A group of our colleagues, involved in the Hermes collaboration which comprises 32 institutions from eleven countries at the Deutsches Elektronen Synchrotron ( DESY) in Hamburg, have continued the analysis of Spin Density Matrix Elements and asymmetry moments in ρ, φ, ω vector meson production. We hope that these studies will provide important constraints on the Generalized Parton Distribution (GPD). Prof. B. Zwieglinski and his team are involved in the large-scale international collaboration PANDA (antiProton ANnihilation at DArmstadt). They worked on the project of an electromagnetic calorimeter for the Panda detector at FAIR. Dr Dmytro Melychuk. a member of this team. defended his PhD thesis '' Development of electromagnetic calorimeter detectors and simulations for spectroscopic measurements of charmonium with PANDA ''. Grzegorz Kapica, a student in this team defended his master's thesis '' lnvestigating the energetic and time response of PWO scintillator with cooled photodiode readout in the gamma energy range 4 - 20 MeV '' · Materials science studies focused on semiconductor compounds that could be used in electronic and optoelectronic devices. This was done in close collaboration with the Institute of Electronic Materials Technology. In particular, a determination of the thermal stability of ohmic contacts in SiC monocrystals was performed. Beams from our Van de Graaff accelerator LECH were used in particle - induced X-ray emission (PIXE) studies

  3. Department of Nuclear Reactions - Overview

    Energy Technology Data Exchange (ETDEWEB)

    Marianski, B [The Andrzej Soltan Institute for Nuclear Studies, Swierk-Otwock (Poland)

    2010-07-01

    Full text: Our scientific activities in 2009 concentrated on four subjects: low energy nuclear physics, high energy nuclear physics, materials science and applications. centre dot Low energy nuclear physics experiments were continued at the Heavy Ion Laboratory of Warsaw University in collaboration with foreign institutions: University of Jyvaskyla, Institute of Nuclear Research of the Ukrainian Academy of Science and Institut de Recherches Subatomique in Strasbourg. Dr Eryk Piasecki was nominated to full professor. centre dot A group of our colleagues, involved in the Hermes collaboration which comprises 32 institutions from eleven countries at the Deutsches Elektronen Synchrotron ( DESY) in Hamburg, have continued the analysis of Spin Density Matrix Elements and asymmetry moments in rho, phi, omega vector meson production. We hope that these studies will provide important constraints on the Generalized Parton Distribution (GPD). Prof. B. Zwieglinski and his team are involved in the large-scale international collaboration PANDA (antiProton ANnihilation at DArmstadt). They worked on the project of an electromagnetic calorimeter for the Panda detector at FAIR. Dr Dmytro Melychuk, a member of this team, defended his PhD thesis ' Development of electromagnetic calorimeter detectors and simulations for spectroscopic measurements of charmonium with PANDA '. Grzegorz Kapica, a student in this team defended his master's thesis ' lnvestigating the energetic and time response of PWO scintillator with cooled photodiode readout in the gamma energy range 4 - 20 MeV ' centre dot Materials science studies focused on semiconductor compounds that could be used in electronic and optoelectronic devices. This was done in close collaboration with the Institute of Electronic Materials Technology. In particular, a determination of the thermal stability of ohmic contacts in SiC monocrystals was performed. Beams from our Van de Graaff accelerator LECH were used in particle - induced X

  4. Implementation of a change management solution based on a product lifecycle management system for a large international project; Einfuehrung eines Product-Lifecycle-Management-gestuetzten Aenderungsprozesses in einem internationalen Grossprojekt

    Energy Technology Data Exchange (ETDEWEB)

    Luehr, Anneke

    2011-10-15

    This Thesis describes the implementation of a Change Management solution based on a Product Lifecycle Management System (PLM System) for a large international project. The objective of Change Management is to ensure a systematic line of action for approving and implementing changes in the project. The Deutsches Elektronen-Synchrotron DESY is one of the world's leading accelerator centres with locations in Hamburg and Zeuthen. Currently, DESY participates in the realization of the international research facility European X-Ray Free-Electron Laser (XFEL) at the Hamburg site. DESY was responsible for the planning of the XFEL. When the project entered the construction phase it was internationalized and now comprises project groups in 12 countries. Thus the requirements on Change Management have changed, as participants from several labs at many different locations are now involved. First the project scope is described and then a target process for the Change Management solution is developed by a requirement analysis. Afterwards the technical implementation of this process in DESY's PLM System is described and the Change Management solution is tested. The process is visualized using the Unified Modeling Language (UML). Finally a description is given of how to transfer the solution to the project environment. (orig.)

  5. Implementation of a change management solution based on a product lifecycle management system for a large international project

    International Nuclear Information System (INIS)

    Luehr, Anneke

    2011-08-01

    This Thesis describes the implementation of a Change Management solution based on a Product Lifecycle Management System (PLM System) for a large international project. The objective of Change Management is to ensure a systematic line of action for approving and implementing changes in the project. The Deutsches Elektronen-Synchrotron DESY is one of the world's leading accelerator centres with locations in Hamburg and Zeuthen. Currently, DESY participates in the realization of the international research facility European X-Ray Free-Electron Laser (XFEL) at the Hamburg site. DESY was responsible for the planning of the XFEL. When the project entered the construction phase it was internationalized and now comprises project groups in 12 countries. Thus the requirements on Change Management have changed, as participants from several labs at many different locations are now involved. First the project scope is described and then a target process for the Change Management solution is developed by a requirement analysis. Afterwards the technical implementation of this process in DESY's PLM System is described and the Change Management solution is tested. The process is visualized using the Unified Modeling Language (UML). Finally a description is given of how to transfer the solution to the project

  6. Method Development for Binding Media Analysis in Painting Cross-Sections by Desorption Electrospray Ionization-Mass Spectrometry (DESI-MS).

    Science.gov (United States)

    Watts, Kristen; Lagalante, Anthony

    2018-06-06

    Art conservation science is in need of a relatively nondestructive way of rapidly identifying the binding media within a painting cross-section and isolating binding media to specific layers within the cross-section. Knowledge of the stratigraphy of cross-sections can be helpful for removing possible unoriginal paint layers on the artistic work. Desorption electrospray ionization-mass spectrometry (DESI-MS) was used in ambient mode to study cross-sections from mock-up layered paint samples and samples from a 17th century baroque painting. The DESI spray was raster scanned perpendicular to the cross-section layers to maximize lateral resolution then analyzed with a triple quadrupole mass analyzer in linear ion trap mode. From these scans, isobaric mass maps were created to map the locations of masses indicative of particular binding media onto the cross-sections. Line paint-outs of pigments in different binding media showed specific and unique ions to distinguish between the modern acrylic media and the lipid containing binding media. This included: OP (EO) 9 surfactant in positive ESI for acrylic (m/z 621), and oleic (m/z 281), stearic (m/z 283), and azelaic (m/z 187) acids in negative ESI for oil and egg tempera. DESI-MS maps of mock-up cross-sections of layered pigmented binding media showed correlation between these ions and the layers with a spatial resolution of 100 μm. DESI-MS is effective in monitoring binding media within an intact painting cross-section via mass spectrometric methods. This includes distinguishing between lipid-containing and modern binding materials present in a known mockup cross section matrix as well as identifying lipid binding media in a 17th century baroque era painting. This article is protected by copyright. All rights reserved.

  7. Study of quality and field limitation of superconducting 1.3 GHz 9-Cell RF-cavities at DESY

    International Nuclear Information System (INIS)

    Schlander, Felix

    2013-01-01

    The European XFEL and the International Linear Collider are based on superconducting rf cavities made of niobium. Their advantages are low ohmic losses which allow high duty cycles and the possibility to use a large beam aperture which is substantial to prevent wake fields at high current accelerators. To reach the theoretical limits of superconducting cavities, it is required to understand the present performance limitations. These are field emission, thermal breakdown (quench) and the ohmic losses dependent on the accelerating field, which are expressed in the quality factor. As the limiting mechanisms themselves are understood in general, the origin of the quench is often unclear. To determine the quench locations, a localisation tool for thermal breakdown using the second sound in superfluid helium has been installed at the cavity test facility at DESY and the results for a sample of about 30 cavities have been examined. The features of the distribution of the quench locations have been analysed and it has been found that the quench locations are in the area of the highest surface magnetic field and not necessarily at the equator of the cells. The data sample has been extended in an attempt to characterise the average behaviour of the quality factor related to the accelerating field. An analysis of the surface resistance of individual cavities shows that a recently developed model for the surface resistance of niobium is not able to describe the measurement in all detail, but the application of an additional mechanism showed promising results.

  8. Study of quality and field limitation of superconducting 1.3 GHz 9-Cell RF-cavities at DESY

    Energy Technology Data Exchange (ETDEWEB)

    Schlander, Felix

    2013-01-15

    The European XFEL and the International Linear Collider are based on superconducting rf cavities made of niobium. Their advantages are low ohmic losses which allow high duty cycles and the possibility to use a large beam aperture which is substantial to prevent wake fields at high current accelerators. To reach the theoretical limits of superconducting cavities, it is required to understand the present performance limitations. These are field emission, thermal breakdown (quench) and the ohmic losses dependent on the accelerating field, which are expressed in the quality factor. As the limiting mechanisms themselves are understood in general, the origin of the quench is often unclear. To determine the quench locations, a localisation tool for thermal breakdown using the second sound in superfluid helium has been installed at the cavity test facility at DESY and the results for a sample of about 30 cavities have been examined. The features of the distribution of the quench locations have been analysed and it has been found that the quench locations are in the area of the highest surface magnetic field and not necessarily at the equator of the cells. The data sample has been extended in an attempt to characterise the average behaviour of the quality factor related to the accelerating field. An analysis of the surface resistance of individual cavities shows that a recently developed model for the surface resistance of niobium is not able to describe the measurement in all detail, but the application of an additional mechanism showed promising results.

  9. Sardana, the software for building SCADAS in scientific environments

    International Nuclear Information System (INIS)

    Coutinho, T.; Cuni, G.; Fernandez-Carreiras, D.; Klora, J.; Pascual-Izarra, C.; Reszela, Z.; Sune, R.; Homs, A.; Taurel, E.; Rey, V.

    2012-01-01

    Sardana is a software package for Supervision, Control and Data Acquisition in scientific installations. It delivers important cost and time reductions associated with the design, development and support of the control and data acquisition systems. It enhances TANGO with the capabilities for building graphical interfaces without writing code, a powerful python-based macro environment for building sequences and complex macros, and a comprehensive access to the hardware. Just as Tango, Sardana is Open Source and its development model is open to collaboration, which provides a free platform that scales well to small laboratories as well as to large scientific institutions. The first beta version has been commissioned for the control system of Accelerators and Beamlines at the Alba Synchrotron. Furthermore, there is a collaboration in place, comprising Desy, MaxIV and Solaris, and several other potential users are evaluating it. (authors)

  10. Scientific Misconduct.

    Science.gov (United States)

    Goodstein, David

    2002-01-01

    Explores scientific fraud, asserting that while few scientists actually falsify results, the field has become so competitive that many are misbehaving in other ways; an example would be unreasonable criticism by anonymous peer reviewers. (EV)

  11. The PLUTO experiment at DORIS (DESY) and the discovery of the gluon (A recollection)

    Energy Technology Data Exchange (ETDEWEB)

    Stella, Bruno R. [Rome-3 Univ. (Italy). Dipt. di Fisica; Istituto Nazionale di Fisica Nucleare, Rome (Italy); Meyer, Hans-Juergen

    2010-08-15

    With the aim of determining the contribution of the PLUTO experiment at the DORIS e{sup +}e{sup -} storage ring to the discovery of the gluon, as members of this former collaboration we have reconsidered all the scientific material produced by PLUTO in 1978 and the first half of 1979. It is clear that the experiment demonstrated the main decay of the Y(9.46 GeV) resonance to be mediated by 3 gluons, by providing evidence for the agreement of this hypothesis with average values and differential distributions of all possible experimental variables and by excluding all other possible alternative models. Moreover PLUTO measured in June 1979 the matrix element of the 3-gluon decay to be quantitatively as expected by QCD (even after hadronization) and, having checked the possibility to correctly trace the gluons' directions, demonstrated the spin 1 nature of the gluon by excluding spin 0 and spin 1/2. The hadronization of the gluon like a quark jet, hypothesized in the 3-gluon jet Monte Carlo simulation, was compatible with the topological data at this energy and was shown to be an approximation at 10% level for the multiplicity ({approx} < p {sub vertical} {sub stroke} {sub vertical} {sub stroke} {sub >}{sup -1}); the right expected gluon fragmentation was needed for the inclusive distributions; this was the first experimental study of (identified) gluon jets. In the following measurements at the PETRA storage ring, these results were confirmed by PLUTO and by three contemporaneous experiments by evidencing at higher energies the gluon radiation (''bremsstrahlung''), the softer one, by jet broadening, and the hard one, by the emission of (now clearly visible) gluon jets by quarks. The gluon's spin 1 particle nature was also confirmed. The PLUTO results on Y decays had been confirmed both by contemporaneous experiments at DORIS (partially) and later (also partially) were confirmed by more sophisticated detectors. (orig.)

  12. The PLUTO experiment at DORIS (DESY) and the discovery of the gluon (A recollection)

    International Nuclear Information System (INIS)

    Stella, Bruno R.; Meyer, Hans-Juergen

    2010-08-01

    With the aim of determining the contribution of the PLUTO experiment at the DORIS e + e - storage ring to the discovery of the gluon, as members of this former collaboration we have reconsidered all the scientific material produced by PLUTO in 1978 and the first half of 1979. It is clear that the experiment demonstrated the main decay of the Y(9.46 GeV) resonance to be mediated by 3 gluons, by providing evidence for the agreement of this hypothesis with average values and differential distributions of all possible experimental variables and by excluding all other possible alternative models. Moreover PLUTO measured in June 1979 the matrix element of the 3-gluon decay to be quantitatively as expected by QCD (even after hadronization) and, having checked the possibility to correctly trace the gluons' directions, demonstrated the spin 1 nature of the gluon by excluding spin 0 and spin 1/2. The hadronization of the gluon like a quark jet, hypothesized in the 3-gluon jet Monte Carlo simulation, was compatible with the topological data at this energy and was shown to be an approximation at 10% level for the multiplicity (∼ vertical stroke vertical stroke > -1 ); the right expected gluon fragmentation was needed for the inclusive distributions; this was the first experimental study of (identified) gluon jets. In the following measurements at the PETRA storage ring, these results were confirmed by PLUTO and by three contemporaneous experiments by evidencing at higher energies the gluon radiation (''bremsstrahlung''), the softer one, by jet broadening, and the hard one, by the emission of (now clearly visible) gluon jets by quarks. The gluon's spin 1 particle nature was also confirmed. The PLUTO results on Y decays had been confirmed both by contemporaneous experiments at DORIS (partially) and later (also partially) were confirmed by more sophisticated detectors. (orig.)

  13. INSPIRE: a new scientific information system for HEP

    CERN Document Server

    Ivanov, R; CERN. Geneva. IT Department

    2010-01-01

    The status of high-energy physics (HEP) information systems has been jointly analyzed by the libraries of CERN, DESY, Fermilab and SLAC. As a result, the four laboratories have started the INSPIRE project – a new platform built by moving the successful SPIRES features and content, curated at DESY, Fermilab and SLAC, into the open-source CDS Invenio digital library software that was developed at CERN. INSPIRE will integrate current acquisition workflows and databases to host the entire body of the HEP literature (about one million records), aiming to become the reference HEP scientific information platform worldwide. It will provide users with fast access to full text journal articles and preprints, but also material such as conference slides and multimedia. INSPIRE will empower scientists with new tools to discover and access the results most relevant to their research, enable novel text- and data-mining applications, and deploy new metrics to assess the impact of articles and authors. In addition, it will ...

  14. INSPIRE: a new scientific information system for HEP

    CERN Multimedia

    Ivanov, R

    2009-01-01

    The status of high-energy physics (HEP) information systems has been jointly analyzed by the libraries of CERN, DESY, Fermilab and SLAC. As a result, the four laboratories have started the INSPIRE project – a new platform built by moving the successful SPIRES features and content, curated at DESY, Fermilab and SLAC, into the open-source CDS Invenio digital library software that was developed at CERN. INSPIRE will integrate present acquisition workflows and databases to host the entire body of the HEP literature (about one million records), aiming to become the reference HEP scientific information platform worldwide. It will provide users with fast access to full-text journal articles and preprints, but also material such as conference slides and multimedia. INSPIRE will empower scientists with new tools to discover and access the results most relevant to their research, enable novel text- and data-mining applications, and deploy new metrics to assess the impact of articles and authors. In addition, it will ...

  15. Scientific communication

    Directory of Open Access Journals (Sweden)

    Aleksander Kobylarek

    2017-09-01

    Full Text Available The article tackles the problem of models of communication in science. The formal division of communication processes into oral and written does not resolve the problem of attitude. The author defines successful communication as a win-win game, based on the respect and equality of the partners, regardless of their position in the world of science. The core characteristics of the process of scientific communication are indicated , such as openness, fairness, support, and creation. The task of creating the right atmosphere for science communication belongs to moderators, who should not allow privilege and differentiation of position to affect scientific communication processes.

  16. Scientific millenarianism

    International Nuclear Information System (INIS)

    Weinberg, A.M.

    1997-01-01

    Today, for the first time, scientific concerns are seriously being addressed that span future times--hundreds, even thousands, or more years in the future. One is witnessing what the author calls scientific millenarianism. Are such concerns for the distant future exercises in futility, or are they real issues that, to the everlasting gratitude of future generations, this generation has identified, warned about and even suggested how to cope with in the distant future? Can the four potential catastrophes--bolide impact, CO 2 warming, radioactive wastes and thermonuclear war--be avoided by technical fixes, institutional responses, religion, or by doing nothing? These are the questions addressed in this paper

  17. Scientific meetings

    International Nuclear Information System (INIS)

    1973-01-01

    One of the main aims of the IAEA is to foster the exchange of scientific and technical information and one of the main ways of doing this is to convene international scientific meetings. They range from large international conferences bringing together several hundred scientists, smaller symposia attended by an average of 150 to 250 participants and seminars designed to instruct rather than inform, to smaller panels and study groups of 10 to 30 experts brought together to advise on a particular programme or to develop a set of regulations. The topics of these meetings cover every part of the Agency's activities and form a backbone of many of its programmes. (author)

  18. Characterization of the transverse phase space at the photo-injector test facility in DESY, Zeuthen site

    Energy Technology Data Exchange (ETDEWEB)

    Staykov, Lazar

    2012-10-15

    High brightness electron beams with charge of 1 nC and low transverse emittance are necessary for the functioning of advanced light sources such as the Free-electron Laser in Hamburg (FLASH) and the European X-ray FEL (XFEL). The photo-injector test facility at DESY, Zeuthen site (PITZ) is dedicated to the optimization of such electron beams. At PITZ the electrons are produced using an RF gun cavity operated at accelerating gradients of up to 60 MV/m. The gun is equipped with a pair of solenoids for the compensation of the emittance growth due to linear space charge forces. This solenoid compensation scheme is enhanced with a properly matched TESLA type normal conducting booster cavity. The main tool for the characterization of the transverse phase space of the electron beam at PITZ is the emittance measurement system (EMSY). It employs the single slit method for the measurement of the transverse phase space distribution of the electron beam. In this thesis, the performance of the EMSY was optimized for measurement of low emittances in a wide range of photo-injector parameters including such that result in electron beams close to the XFEL specifications. First results on the characterization of the PITZ photo-injector with a gun operated at maximum accelerating gradient of 60 MV/m are presented. This includes scans of the solenoid focusing strength, the initial beam size and the booster gradient. A comparison between results obtained at lower accelerating gradients is made with emphasize on the benefit of higher accelerating gradient.

  19. Characterization of the transverse phase space at the photo-injector test facility in DESY, Zeuthen site

    International Nuclear Information System (INIS)

    Staykov, Lazar

    2012-10-01

    High brightness electron beams with charge of 1 nC and low transverse emittance are necessary for the functioning of advanced light sources such as the Free-electron Laser in Hamburg (FLASH) and the European X-ray FEL (XFEL). The photo-injector test facility at DESY, Zeuthen site (PITZ) is dedicated to the optimization of such electron beams. At PITZ the electrons are produced using an RF gun cavity operated at accelerating gradients of up to 60 MV/m. The gun is equipped with a pair of solenoids for the compensation of the emittance growth due to linear space charge forces. This solenoid compensation scheme is enhanced with a properly matched TESLA type normal conducting booster cavity. The main tool for the characterization of the transverse phase space of the electron beam at PITZ is the emittance measurement system (EMSY). It employs the single slit method for the measurement of the transverse phase space distribution of the electron beam. In this thesis, the performance of the EMSY was optimized for measurement of low emittances in a wide range of photo-injector parameters including such that result in electron beams close to the XFEL specifications. First results on the characterization of the PITZ photo-injector with a gun operated at maximum accelerating gradient of 60 MV/m are presented. This includes scans of the solenoid focusing strength, the initial beam size and the booster gradient. A comparison between results obtained at lower accelerating gradients is made with emphasize on the benefit of higher accelerating gradient.

  20. Matrix effect in the analysis of drugs of abuse from urine with desorption atmospheric pressure photoionization-mass spectrometry (DAPPI-MS) and desorption electrospray ionization-mass spectrometry (DESI-MS)

    International Nuclear Information System (INIS)

    Suni, Niina M.; Lindfors, Pia; Laine, Olli; Ostman, Pekka; Ojanperae, Ilkka; Kotiaho, Tapio; Kauppila, Tiina J.; Kostiainen, Risto

    2011-01-01

    Highlights: → DAPPI-MS and DESI-MSI in the analysis of drugs of abuse from urine. → DAPPI-MS has better urine matrix tolerance over DESI-MS. → Urine matrix can affect the ionization mechanism in DAPPI. → DAPPI-MS/MS can be used for screening of drugs from urine after sample pretreatment. - Abstract: We have studied the matrix effect within direct analysis of benzodiazepines and opioids from urine with desorption electrospray ionization-mass spectrometry (DESI-MS) and desorption atmospheric pressure photoionization-mass spectrometry (DAPPI-MS). The urine matrix was found to affect the ionization mechanism of the opioids in DAPPI-MS favoring proton transfer over charge exchange reaction. The sensitivity for the drugs in solvent matrix was at the same level with DESI-MS and DAPPI-MS (LODs 0.05-6 μg mL -1 ) but the decrease in sensitivity due to the urine matrix was higher with DESI (typically 20-160-fold) than with DAPPI (typically 2-15-fold) indicating better matrix tolerance of DAPPI over DESI. Also in MS/MS mode, DAPPI provided better sensitivity than DESI for the drugs in urine. The feasibility of DAPPI-MS/MS was then studied in screening the same drugs from five authentic, forensic post mortem urine samples. A reference measurement with gas chromatography-mass spectrometry (GC-MS) (including pretreatment) revealed 16 findings from the samples, whereas with DAPPI-MS/MS after sample pretreatment, 15 findings were made. Sample pretreatment was found necessary, since only eight findings were made from the same samples untreated.

  1. Matrix effect in the analysis of drugs of abuse from urine with desorption atmospheric pressure photoionization-mass spectrometry (DAPPI-MS) and desorption electrospray ionization-mass spectrometry (DESI-MS)

    Energy Technology Data Exchange (ETDEWEB)

    Suni, Niina M.; Lindfors, Pia; Laine, Olli [Division of Pharmaceutical Chemistry, University of Helsinki, P.O. Box 56, Helsinki FI-00014 (Finland); Ostman, Pekka; Ojanperae, Ilkka [Hjelt Institute, Department of Forensic Medicine, University of Helsinki, P.O. Box 40, Helsinki FI-00014 (Finland); Kotiaho, Tapio [Division of Pharmaceutical Chemistry, University of Helsinki, P.O. Box 56, Helsinki FI-00014 (Finland); Laboratory of Analytical Chemistry, Department of Chemistry, University of Helsinki, P.O. Box 55, Helsinki FI-00014 (Finland); Kauppila, Tiina J. [Division of Pharmaceutical Chemistry, University of Helsinki, P.O. Box 56, Helsinki FI-00014 (Finland); Kostiainen, Risto, E-mail: risto.kostiainen@helsinki.fi [Division of Pharmaceutical Chemistry, University of Helsinki, P.O. Box 56, Helsinki FI-00014 (Finland)

    2011-08-05

    Highlights: {yields} DAPPI-MS and DESI-MSI in the analysis of drugs of abuse from urine. {yields} DAPPI-MS has better urine matrix tolerance over DESI-MS. {yields} Urine matrix can affect the ionization mechanism in DAPPI. {yields} DAPPI-MS/MS can be used for screening of drugs from urine after sample pretreatment. - Abstract: We have studied the matrix effect within direct analysis of benzodiazepines and opioids from urine with desorption electrospray ionization-mass spectrometry (DESI-MS) and desorption atmospheric pressure photoionization-mass spectrometry (DAPPI-MS). The urine matrix was found to affect the ionization mechanism of the opioids in DAPPI-MS favoring proton transfer over charge exchange reaction. The sensitivity for the drugs in solvent matrix was at the same level with DESI-MS and DAPPI-MS (LODs 0.05-6 {mu}g mL{sup -1}) but the decrease in sensitivity due to the urine matrix was higher with DESI (typically 20-160-fold) than with DAPPI (typically 2-15-fold) indicating better matrix tolerance of DAPPI over DESI. Also in MS/MS mode, DAPPI provided better sensitivity than DESI for the drugs in urine. The feasibility of DAPPI-MS/MS was then studied in screening the same drugs from five authentic, forensic post mortem urine samples. A reference measurement with gas chromatography-mass spectrometry (GC-MS) (including pretreatment) revealed 16 findings from the samples, whereas with DAPPI-MS/MS after sample pretreatment, 15 findings were made. Sample pretreatment was found necessary, since only eight findings were made from the same samples untreated.

  2. Recent experiments at DESY

    International Nuclear Information System (INIS)

    Fluegge, G.

    1979-05-01

    After a short introduction into e + e - machines the author concentrate on the third generation of particles: the heavy lepton tau and the Upsilons. In the second part the various aspects of event topologies in the DORIS energy range will be discussed and in the final chapter the physics at PETRA is described. (WL)

  3. Scientific computing

    CERN Document Server

    Trangenstein, John A

    2017-01-01

    This is the third of three volumes providing a comprehensive presentation of the fundamentals of scientific computing. This volume discusses topics that depend more on calculus than linear algebra, in order to prepare the reader for solving differential equations. This book and its companions show how to determine the quality of computational results, and how to measure the relative efficiency of competing methods. Readers learn how to determine the maximum attainable accuracy of algorithms, and how to select the best method for computing problems. This book also discusses programming in several languages, including C++, Fortran and MATLAB. There are 90 examples, 200 exercises, 36 algorithms, 40 interactive JavaScript programs, 91 references to software programs and 1 case study. Topics are introduced with goals, literature references and links to public software. There are descriptions of the current algorithms in GSLIB and MATLAB. This book could be used for a second course in numerical methods, for either ...

  4. Methodological issues in protein and lipidic expressions in brain tissue exposed to Co{sup 60} based on DESI/MALDI-MS

    Energy Technology Data Exchange (ETDEWEB)

    Soares, Matheus F.; Campos, Tarcísio P.R.; Augusti, Rodinei, E-mail: matheus.soares@gmail.com, E-mail: tprcampos@pq.cnpq.br, E-mail: augusti.rodinei@gmail.com, E-mail: augusti@ufmg.br [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte (Brazil); Eberlin, Marcos N.; Vendramini, Pedro H., E-mail: eberlin@iqm.unicamp.br, E-mail: ph_vendramini@yahoo.com.br [Universidade de Campinas (UNICAMP), SP (Brazil). Thompson Mass Spectroscopy Laboratory

    2017-07-01

    The present paper attempts to present some issues in the methodology of identifying lipid and protein changes in brain tissue induced by radiation. The goal was to address the analysis of the methodology and to investigate the feasibility of the generation of lipid/protein profiles of irradiated brain tissue, in order to identify radioinduced changes. Lipids and proteins are biomolecules with diverse structures and functionalities that participate in important intracellular processes. Changes in the lipid and the tissue protein profiles may indicate a cellular response to an external stimulus as well as the emergence of neoplasms or neurodegenerative diseases such as Alzheimer's. DESI-MS is a convenient method for identifying lipids and their spatial distribution in tissue beyond analytical quantification. DESI-MS allows the creation of an image of several low lipid m/z classes. MALDI-MS has already been a method used in the study of macromolecules as structural, membrane, hormone, neuromediator and immunological peptides. Through a full-scan matrix scan, with a m/z spectrum between 500-1000 for lipids and with a mass spectrum of 1000-15000 Da for proteins, the molecular profile can be analyzed. Generated pixel shape 2D chemical image. The produced image allows to associate the tissue distribution of the lipids and proteins with their chemical profile identified, allowing the verification of the changes radioinduced. Radiation triggers intense oxidative stress by increasing reactive oxygen species (ROS) and free radicals, causing DNA damage with consequent alterations in proteomics and cellular lipid explaining such changes in the lipid and protein expressions. The cellular morphophysiological changes are responsible for both the clonogenic inhibition and the induction of the apoptotic process. The images's production was directly dependent on the rigorous execution of the methodological procedures. Innumerable interferences could impair the image

  5. Physicochemical, thermal and functional characterisation of protein isolates from Kabuli and Desi chickpea (Cicer arietinum L.): a comparative study with soy (Glycine max) and pea (Pisum sativum L.).

    Science.gov (United States)

    Withana-Gamage, Thushan S; Wanasundara, Janitha P D; Pietrasik, Zeb; Shand, Phyllis J

    2011-04-01

    Chickpea (Cicer arietinum L.) seeds are a good source of protein that has potential applications in new product formulation and fortification. The main objectives of this study were to analyse the physicochemical, thermal and functional properties of chickpea protein isolates (CPIs) and compare them with those of soy (SPI) and pea (PPI) protein isolates. Extracted CPIs had mean protein contents of 728-853 g kg(-1) (dry weight basis). Analysis of their deconvoluted Fourier transform infrared spectra gave secondary structure estimates of 25.6-32.7% α-helices, 32.5-40.4% β-sheets, 13.8-18.9% turns and 16.3-19.2% disordered structures. CPIs from CDC Xena, among Kabuli varieties, and Myles, among Desi varieties, as well as SPI had the highest water-holding and oil absorption capacities. The emulsifying properties of Kabuli CPIs were superior to those of PPI and Desi CPIs and as good as those of SPI. The heat-induced gelation properties of CPIs showed a minimum protein concentration required to form a gel structure ranging from 100 to 140 g L(-1) . Denaturation temperatures and enthalpies of CPIs ranged from 89.0 to 92.0 °C and from 2.4 to 4.0 J g(-1) respectively. The results suggest that most physicochemical, thermal and functional properties of CPIs compare favourably with those of SPI and are better than those of PPI. Hence CPI may be suitable as a high-quality substitute for SPI in food applications. Copyright © 2011 Society of Chemical Industry.

  6. NIC symposium 2010. Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Muenster, Gernot [Muenster Univ. (Germany). Inst. fuer Theoretische Physik 1; Wolf, Dietrich [Duisburg-Essen Univ., Duisburg (Germany). Fakultaet fuer Physik; Kremer, Manfred (eds.) [Forschungszentrum Juelich GmbH (DE). Juelich Supercomputing Centre (JSC)

    2012-06-21

    The fifth NIC-Symposium gave an overview of the activities of the John von Neumann Institute for Computing (NIC) and of the results obtained in the last two years by research groups supported by the NIC. The large recent progress in supercomputing is highlighted by the fact that the newly installed Blue Gene/P system in Juelich - with a peak performance of 1 Petaflop/s - currently ranks number four in the TOP500 list. This development opens new dimensions in simulation science for researchers in Germany and Europe. NIC - a joint foundation of Forschungszentrum Juelich, Deutsches Elektronen-Synchrotron (DESY) and Gesellschaft fuer Schwerionenforschung (GSI) - supports with its members' supercomputer facilities about 130 research groups at universities and national labs working on computer simulations in various fields of science. Fifteen invited lectures covered selected topics in the following fields: Astrophysics Biophysics Chemistry Elementary Particle Physics Condensed Matter Materials Science Soft Matter Science Environmental Research Hydrodynamics and turbulence Plasma Physics Computer Science The talks are intended to inform a broad audience of scientists and the interested public about the research activities at NIC. The proceedings of the symposium cover projects that have been supported by the IBM supercomputers JUMP and IBM Blue Gene/P in Juelich and the APE topical computer at DESY-Zeuthen in an even wider range than the lectures.

  7. Performance of a reentrant cavity beam position monitor

    Directory of Open Access Journals (Sweden)

    Claire Simon

    2008-08-01

    Full Text Available The beam-based alignment and feedback systems, essential operations for the future colliders, require high resolution beam position monitors (BPMs. In the framework of the European CARE/SRF program, a reentrant cavity BPM with its associated electronics was developed by the CEA/DSM/Irfu in collaboration with DESY. The design, the fabrication, and the beam test of this monitor are detailed within this paper. This BPM is designed to be inserted in a cryomodule, work at cryogenic temperature in a clean environment. It has achieved a resolution better than 10  μm and has the possibility to perform bunch to bunch measurements for the x-ray free electron laser (X-FEL and the International Linear Collider (ILC. Its other features are a small size of the rf cavity, a large aperture (78 mm, and an excellent linearity. A first prototype of a reentrant cavity BPM was installed in the free electron laser in Hamburg (FLASH, at Deutsches Elektronen-Synchrotron (DESY and demonstrated its operation at cryogenic temperature inside a cryomodule. The second, installed, also, in the FLASH linac to be tested with beam, measured a resolution of approximately 4  μm over a dynamic range ±5  mm in single bunch.

  8. NIC symposium 2010. Proceedings

    International Nuclear Information System (INIS)

    Muenster, Gernot

    2012-01-01

    The fifth NIC-Symposium gave an overview of the activities of the John von Neumann Institute for Computing (NIC) and of the results obtained in the last two years by research groups supported by the NIC. The large recent progress in supercomputing is highlighted by the fact that the newly installed Blue Gene/P system in Juelich - with a peak performance of 1 Petaflop/s - currently ranks number four in the TOP500 list. This development opens new dimensions in simulation science for researchers in Germany and Europe. NIC - a joint foundation of Forschungszentrum Juelich, Deutsches Elektronen-Synchrotron (DESY) and Gesellschaft fuer Schwerionenforschung (GSI) - supports with its members' supercomputer facilities about 130 research groups at universities and national labs working on computer simulations in various fields of science. Fifteen invited lectures covered selected topics in the following fields: Astrophysics Biophysics Chemistry Elementary Particle Physics Condensed Matter Materials Science Soft Matter Science Environmental Research Hydrodynamics and turbulence Plasma Physics Computer Science The talks are intended to inform a broad audience of scientists and the interested public about the research activities at NIC. The proceedings of the symposium cover projects that have been supported by the IBM supercomputers JUMP and IBM Blue Gene/P in Juelich and the APE topical computer at DESY-Zeuthen in an even wider range than the lectures.

  9. NIC symposium 2010. Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Muenster, Gernot [Muenster Univ. (Germany). Inst. fuer Theoretische Physik 1; Wolf, Dietrich [Duisburg-Essen Univ., Duisburg (Germany). Fakultaet fuer Physik; Kremer, Manfred [Forschungszentrum Juelich GmbH (DE). Juelich Supercomputing Centre (JSC)

    2012-06-21

    The fifth NIC-Symposium gave an overview of the activities of the John von Neumann Institute for Computing (NIC) and of the results obtained in the last two years by research groups supported by the NIC. The large recent progress in supercomputing is highlighted by the fact that the newly installed Blue Gene/P system in Juelich - with a peak performance of 1 Petaflop/s - currently ranks number four in the TOP500 list. This development opens new dimensions in simulation science for researchers in Germany and Europe. NIC - a joint foundation of Forschungszentrum Juelich, Deutsches Elektronen-Synchrotron (DESY) and Gesellschaft fuer Schwerionenforschung (GSI) - supports with its members' supercomputer facilities about 130 research groups at universities and national labs working on computer simulations in various fields of science. Fifteen invited lectures covered selected topics in the following fields: Astrophysics Biophysics Chemistry Elementary Particle Physics Condensed Matter Materials Science Soft Matter Science Environmental Research Hydrodynamics and turbulence Plasma Physics Computer Science The talks are intended to inform a broad audience of scientists and the interested public about the research activities at NIC. The proceedings of the symposium cover projects that have been supported by the IBM supercomputers JUMP and IBM Blue Gene/P in Juelich and the APE topical computer at DESY-Zeuthen in an even wider range than the lectures.

  10. Performance of a reentrant cavity beam position monitor

    International Nuclear Information System (INIS)

    Simon, C.; Luong, M.; Chel, S.; Napoly, O.; Novo, J.; Roudier, D.; Rouviere, N.; Baboi, N.; Mildner, N.; Nolle, D.

    2008-01-01

    The beam-based alignment and feedback systems, essential operations for the future colliders, require high resolution beam position monitors (BPMs). In the framework of the European CARE/SRF program, a reentrant cavity BPM with its associated electronics was developed by the CEA/DSM/Irfu in collaboration with DESY. The design, the fabrication, and the beam test of this monitor are detailed within this paper. This BPM is designed to be inserted in a cryo-module, work at cryogenic temperature in a clean environment. It has achieved a resolution better than 10 μm and has the possibility to perform bunch to bunch measurements for the X-ray free electron laser (X-FEL) and the International Linear Collider (ILC). Its other features are a small size of the rf cavity, a large aperture (78 mm), and an excellent linearity. A first prototype of a reentrant cavity BPM was installed in the free electron laser in Hamburg (FLASH), at Deutsches Elektronen-Synchrotron (DESY) and demonstrated its operation at cryogenic temperature inside a cryo-module. The second, installed, also, in the FLASH linac to be tested with beam, measured a resolution of approximately 4 μm over a dynamic range ± 5 mm in single bunch. (authors)

  11. Performance of a reentrant cavity beam position monitor

    Science.gov (United States)

    Simon, Claire; Luong, Michel; Chel, Stéphane; Napoly, Olivier; Novo, Jorge; Roudier, Dominique; Rouvière, Nelly; Baboi, Nicoleta; Mildner, Nils; Nölle, Dirk

    2008-08-01

    The beam-based alignment and feedback systems, essential operations for the future colliders, require high resolution beam position monitors (BPMs). In the framework of the European CARE/SRF program, a reentrant cavity BPM with its associated electronics was developed by the CEA/DSM/Irfu in collaboration with DESY. The design, the fabrication, and the beam test of this monitor are detailed within this paper. This BPM is designed to be inserted in a cryomodule, work at cryogenic temperature in a clean environment. It has achieved a resolution better than 10μm and has the possibility to perform bunch to bunch measurements for the x-ray free electron laser (X-FEL) and the International Linear Collider (ILC). Its other features are a small size of the rf cavity, a large aperture (78 mm), and an excellent linearity. A first prototype of a reentrant cavity BPM was installed in the free electron laser in Hamburg (FLASH), at Deutsches Elektronen-Synchrotron (DESY) and demonstrated its operation at cryogenic temperature inside a cryomodule. The second, installed, also, in the FLASH linac to be tested with beam, measured a resolution of approximately 4μm over a dynamic range ±5mm in single bunch.

  12. The diagnostic utility of 3D-ESI rotating and moving dipole methodology in the pre-surgical evaluation of MRI-negative childhood epilepsy due to focal cortical dysplasia.

    Science.gov (United States)

    Russo, Angelo; Lallas, Matt; Jayakar, Prasanna; Miller, Ian; Hyslop, Ann; Dunoyer, Catalina; Resnick, Trevor; Duchowny, Michael

    2016-09-01

    This study investigates whether a combined rotating dipole (RD) and moving dipole (MD) solution enhances three-dimensional electroencephalography (EEG) source imaging (3D-ESI) localization in magnetic resonance imaging (MRI)-negative pediatric patients with focal cortical dysplasia (FCD). We retrospectively selected 14 MRI-negative patients with FCD from a cohort of 60 pediatric patients previously used to evaluate the diagnostic utility of 3D-ESI in epilepsy surgery. Patients were younger than 18 years at time of surgery and had at least 1 year of outcome data. RD and MD models were constructed for each interictal spike or sharp wave, and it was determined whether each inverse algorithm localized within the surgical resection cavity (SRC). We also compared the 3D-ESI findings and surgical outcome with positron emission tomography (PET) and ictal single photon emission computed tomography (iSPECT). RD analyses revealed a high concordance with the SRC (78.6%), particularly for temporal lobe resection (100.0%), and showed superior localization compared to PET and iSPECT, with the highest correlation in FCD type I and temporal lobe resection. Furthermore, the RD method was superior to iSPECT in FCD type II cases and to PET in extratemporal resections. RD and MD results were comparable, but in 18.2% of patients with FCD type I with localizing RDs, the MD solution was only partially within the SRC; in all of these patients 3D-ESI also correlated with superior surgical outcome compared to PET and iSPECT, especially when RD and MD solutions were analyzed together. 3D-ESI in MRI-negative cases showed superior localization compared to iSPECT or PET, especially in FCD type I and temporal lobe epilepsy, and correlated with superior surgical outcome compared to iSPECT and PET at 1 year and 2 years postoperatively, especially when RD and MD solutions were analyzed together. These findings suggest that 3D-ESI based on a combined RD-MD solution improves surgical accuracy in

  13. Scientific instruments, scientific progress and the cyclotron

    International Nuclear Information System (INIS)

    Baird, David; Faust, Thomas

    1990-01-01

    Philosophers speak of science in terms of theory and experiment, yet when they speak of the progress of scientific knowledge they speak in terms of theory alone. In this article it is claimed that scientific knowledge consists of, among other things, scientific instruments and instrumental techniques and not simply of some kind of justified beliefs. It is argued that one aspect of scientific progress can be characterized relatively straightforwardly - the accumulation of new scientific instruments. The development of the cyclotron is taken to illustrate this point. Eight different activities which promoted the successful completion of the cyclotron are recognised. The importance is in the machine rather than the experiments which could be run on it and the focus is on how the cyclotron came into being, not how it was subsequently used. The completed instrument is seen as a useful unit of scientific progress in its own right. (UK)

  14. Spatially resolved investigation of systemic and contact pesticides in plant material by desorption electrospray ionization mass spectrometry imaging (DESI-MSI).

    Science.gov (United States)

    Gerbig, Stefanie; Brunn, Hubertus E; Spengler, Bernhard; Schulz, Sabine

    2015-09-01

    Distribution of pesticides both on the surface of leaves and in cross sections of plant stem and leaves was investigated using desorption electrospray ionization mass spectrometry imaging (DESI-MSI) with a spatial resolution of 50-100 μm. Two commercially available insecticide sprays containing different contact pesticides were applied onto leaves of Cotoneaster horizontalis, and the distributions of all active ingredients were directly analyzed. The first spray contained pyrethrins and rapeseed oil, both known as natural insecticides. Each component showed an inhomogeneous spreading throughout the leaf, based on substance polarity and solubility. The second spray contained the synthetic insecticides imidacloprid and methiocarb. Imidacloprid accumulated on the border of the leaf, while methiocarb was distributed more homogenously. In order to investigate the incorporation of a systemically acting pesticide into Kalanchoe blossfeldiana, a commercially available insecticide tablet containing dimethoate was spiked to the soil of the plant. Cross sections of the stem and leaf were obtained 25 and 60 days after application. Dimethoate was mainly detected in the transport system of the plant after 25 days, while it was found to be homogenously distributed in a leaf section after 60 days.

  15. The preparation of particle beams for experiments of hadron physics: Slow extraction at ELFE rate at DESY and ELSA, as well as beam cooling at HERA

    International Nuclear Information System (INIS)

    Gentner, M.

    1999-02-01

    Various complementary experimental approaches are possible to study hadron physics, all of which require dedicated accelerator facilities. One approach, known as the ELFE rate at DESY project, makes use of a continuous electron beam with an energy of 15 to 25 GeV, a current of at least 30 μA and very small emittance, for fixed target experiments. The formation of such a beam by stretching a pulsed LINAC beam with the help of the HERA electron ring has been studied. At lower beam energies and currents this concept is already being used at the ELSA facility of Bonn University. Here the extraction process has been studied intensively and has been compared with measurements. Another approach to study hadron physics is the use of an electron - ion collider. To achieve high integrated luminosities cooling of the ion beam is necessary, especially in the case of heavy ions. For HERA high energy beam cooling with the help of an electron storage ring has been studied. (orig.)

  16. Beam extraction dynamics at the space-charge-limit of the high brightness E-XFEL electron source at DESY-PITZ

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Ye; Gjonaj, Erion; Weiland, Thomas [TEMF, Technische Universitaet Darmstadt, Schlossgartenstrasse 8, 64289 Darmstadt (Germany)

    2015-07-01

    The physics of the photoemission, as one of the key issues for successful operation of linac based free-electron lasers like the European X-ray Free Electron Laser (E-XFEL) and the Free-electron Laser in Hamburg (FLASH), is playing an increasingly important role in the high brightness DESY-PITZ electron source. We study photoemission physics and discuss full three-dimensional numerical modeling of the electron bunch emission. The beam extraction dynamics at the photocathode has been investigated through the 3D fully electromagnetic (EM) Particle-in-Cell (PIC) solver of CST Particle Studio under the assumption of the photoemission source operating at or close to its space charge limit. PIC simulation results have shown good agreements with measurements on total emitted bunch charge for distinct experimental parameters. Further comparisons showed a general failure for the conventional Poisson solver based tracking algorithm to correctly predict the beam dynamics at the space charge limit. It is furthermore found, that fully EM PIC simulations are also consistent with a simple emission model based on the multidimensional Child-Langmuir law.

  17. SALTON SEA SCIENTIFIC DRILLING PROJECT: SCIENTIFIC PROGRAM.

    Science.gov (United States)

    Sass, J.H.; Elders, W.A.

    1986-01-01

    The Salton Sea Scientific Drilling Project, was spudded on 24 October 1985, and reached a total depth of 10,564 ft. (3. 2 km) on 17 March 1986. There followed a period of logging, a flow test, and downhole scientific measurements. The scientific goals were integrated smoothly with the engineering and economic objectives of the program and the ideal of 'science driving the drill' in continental scientific drilling projects was achieved in large measure. The principal scientific goals of the project were to study the physical and chemical processes involved in an active, magmatically driven hydrothermal system. To facilitate these studies, high priority was attached to four areas of sample and data collection, namely: (1) core and cuttings, (2) formation fluids, (3) geophysical logging, and (4) downhole physical measurements, particularly temperatures and pressures.

  18. Scientific integrity in Brazil.

    Science.gov (United States)

    Lins, Liliane; Carvalho, Fernando Martins

    2014-09-01

    This article focuses on scientific integrity and the identification of predisposing factors to scientific misconduct in Brazil. Brazilian scientific production has increased in the last ten years, but the quality of the articles has decreased. Pressure on researchers and students for increasing scientific production may contribute to scientific misconduct. Cases of misconduct in science have been recently denounced in the country. Brazil has important institutions for controlling ethical and safety aspects of human research, but there is a lack of specific offices to investigate suspected cases of misconduct and policies to deal with scientific dishonesty.

  19. The Scientific Enterprise

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 13; Issue 9. The Scientific Enterprise - Assumptions, Problems, and Goals in the Modern Scientific Framework. V V Raman. Reflections Volume 13 Issue 9 September 2008 pp 885-894 ...

  20. Extensional scientific realism vs. intensional scientific realism.

    Science.gov (United States)

    Park, Seungbae

    2016-10-01

    Extensional scientific realism is the view that each believable scientific theory is supported by the unique first-order evidence for it and that if we want to believe that it is true, we should rely on its unique first-order evidence. In contrast, intensional scientific realism is the view that all believable scientific theories have a common feature and that we should rely on it to determine whether a theory is believable or not. Fitzpatrick argues that extensional realism is immune, while intensional realism is not, to the pessimistic induction. I reply that if extensional realism overcomes the pessimistic induction at all, that is because it implicitly relies on the theoretical resource of intensional realism. I also argue that extensional realism, by nature, cannot embed a criterion for distinguishing between believable and unbelievable theories. Copyright © 2016 Elsevier Ltd. All rights reserved.

  1. WWW: The Scientific Method

    Science.gov (United States)

    Blystone, Robert V.; Blodgett, Kevin

    2006-01-01

    The scientific method is the principal methodology by which biological knowledge is gained and disseminated. As fundamental as the scientific method may be, its historical development is poorly understood, its definition is variable, and its deployment is uneven. Scientific progress may occur without the strictures imposed by the formal…

  2. ELFEαDESY: an electron laboratory for Europe at DESY

    International Nuclear Information System (INIS)

    Frois, B.; Brinkmann, R.; Kose, R.; Maidment, J.; Bruinsma, P.; Wu, Y.; Conto, J.M. de; Faure, J.; Gentner, M.; Husmann, D.; Tazzioli, F.

    1997-01-01

    ELFE is a project to develop a 15 to 30 GeV, high luminosity, continuous beam electron accelerator for scattering experiments from fixed nuclear targets. The goal is to explore the quark and gluon structure of matter by exclusive and semi-exclusive electron scattering from nuclei. The idea of integrating ELFE into TESLA facility is based on the fact that the superconducting linac is operated at a low duty cycle, about 0.4%, for the electron-positron collider mode and the machine is available for other tasks during the time between collider pulses. A fraction of the beam pulses produced by TESLA could be injected into the HERA ring until the ring is filled. The authors show that it is possible to extract the electrons from HERA used as a stretcher ring and produce a high luminosity quasi continuous beam suitable for nuclear physics experiments. The performances of the extracted beam in term of emittance, energy spread and duty factor have been evaluated. (N.T.)

  3. Physicists thriving with paperless

    International Nuclear Information System (INIS)

    O'Connell, H.B.

    2000-01-01

    The Stanford Linear Accelerator Center (SLAC) and Deutsches Elektronen Synchrotron (DESY) libraries have been comprehensively cataloguing the High Energy Particle Physics (HEP) literature since 1974 and the core database, SPIRES-HEP, now indexes over 400,000 research articles, with almost 50% linked to fulltext electronic versions. This database motivated the creation of the first web implementation in the United States (and the second in the world). With this database and the invention of the Los Alamos E-print archives in 1991, the HEP community pioneered the trend to ''paperless publishing'' and the trend to paperless access, in other words, the ''virtual library.'' the authors examine the impact this has had both on the way scientists research and on paper-based publishing. With the E-print distribution having evolved from an established tradition of sending out hard-copy pre-prints, the standard of work archived at Los Alamos is very high (70% of papers are eventually published in journals and another 20% are conference proceedings). To allow authors to ''thrive'' the SPIRES-HEP collaboration has been ensuring that as much information as possible is included with each bibliographic entry for a paper. Such meta-data can include, tables of the experimental data that researchers can easily use to perform their own analyses as well as detailed descriptions of the experiment, citation tracking and links to full-text documents

  4. DESERTEC: energy for the planet

    CERN Multimedia

    Anaïs Schaeffer

    2011-01-01

    The DESERTEC project, launched in 2007, aims to enable the countries of Europe, North Africa and the Middle East to cover a large part of their energy needs through the use of renewable energies by 2050. One of the instigators of this project is Gerhard Knies, former particle physicist at DESY (Deutsches Elektronen-Synchrotron). On several occasions he also took part in experiments at CERN, and on 3 February he returned to the Laboratory to present DESERTEC at a special colloquium.   By combining different sources of renewable energy, the DESERTEC project could supply the energy needs of the EU-MENA region countries. The red squares represent the total CSP surfaces needed to provide the present day electricity demands of the world, Europe and the MENA region. Source: DESERTEC Foundation, www.desertec.org The first stage of the project is to install solar power stations in the deserts of the North Africa and Middle East (MENA) region. Deserts are incomparable sources of clean energy and might hold ...

  5. Spin-orbit maps and electron spin dynamics for the luminosity upgrade project at HERA

    International Nuclear Information System (INIS)

    Berglund, G.Z.M.

    2001-09-01

    HERA is the high energy electron(positron)-proton collider at deutsches elektronen-synchrotron (DESY) in Hamburg. Following eight years of successful running, five of which were with a longitudinally spin polarized electron(positron) beam for the HERMES experiment, the rings have now been modified to increase the luminosity by a factor of about five and spin rotators have been installed for the H1 and ZEUS experiments. The modifications involve nonstandard configurations of overlapping magnetic fields and other aspects which have profound implications for the polarization. This thesis addresses the problem of calculating the polarization in the upgraded machine and the measures needed to maintain the polarization. A central topic is the construction of realistic spin-orbit transport maps for the regions of overlapping fields and their implementation in existing software. This is the first time that calculations with such fields have been possible. Using the upgraded software, calculations are presented for the polarization that can be expected in the upgraded machine and an analysis is made of the contributions to depolarization from the various parts of the machine. It is concluded that about 50% polarization should be possible. The key issues for tuning the machine are discussed. The last chapter deals with a separate topic, namely how to exploit a simple unitary model of spin motion to describe electron depolarization and thereby expose a misconception appearing in the literature. (orig.)

  6. 3D Chemical Information in Clays Using Synchrotron Techniques

    International Nuclear Information System (INIS)

    Denecke, Melissa A.; Schaefer, Thorsten

    2013-01-01

    In this presentation, two examples exploiting these advantages of using focused beams and especially X-rays for understanding actinide geochemistry in heterogeneous, natural geological media (sediment and granite), necessary for establishment of reliable predictive models required for designing safe nuclear disposal concepts and assessing associated potential long-term hazards. Combining spectroscopic results from focused IR radiation and X-rays in both the hard and soft (C 1s) regimes in the first example reveals the speciation of U in U-rich argillaceous sediment to be a nano-particulate tetravalent UO 2 -like phase, which is associated with light elements and organic material. This allows a tentative hypothesis for U immobilization in the sediment involving the organic material associated with the clay. The second example specifically deals with characterizing an immobile actinide (Np) species in a granite column following a tracer experiment. These results will be presented orally and are not found in the abstract below; information can be found in (Denecke et al. 2009, 2011). The talk will conclude with an outlook of the exciting opportunities offered by emerging X-ray sources such as the new PETRAIII facility at the Deutsches Elektronen-Synchrotron (DESY). (authors)

  7. Quantitative X-ray microtomography with synchrotron radiation

    International Nuclear Information System (INIS)

    Donath, T.

    2007-01-01

    Synchrotron-radiation-based computed microtomography (SR μ CT) is an established method for the examination of volume structures. It allows to measure the x-ray attenuation coefficient of a specimen three-dimensionally with a spatial resolution of about one micrometer. In contrast to conventional x-ray sources (x-ray tubes), the unique properties of synchrotron radiation enable quantitative measurements that do not suffer from beam-hardening artifacts. During this work the capabilities for quantitative SR μ CT measurements have been further improved by enhancements that were made to the SR μ CT apparatus and to the reconstruction chain. For high-resolution SR μ CT an x-ray camera consisting of luminescent screen (x-ray phosphor), lens system, and CCD camera was used. A significant suppression of blur that is caused by reflections inside the luminescent screen could be achieved by application of an absorbing optical coating to the screen surface. It is shown that blur and ring artifacts in the tomographic reconstructions are thereby drastically reduced. Furthermore, a robust and objective method for the determination of the center of rotation in projection data (sinograms) is presented that achieves sub-pixel precision. By implementation of this method into the reconstruction chain, complete automation of the reconstruction process has been achieved. Examples of quantitative SR μ CT studies conducted at the Hamburger Synchrotronstrahlungslabor HASYLAB at the Deutsches Elektronen-Synchrotron DESY are presented and used for the demonstration of the achieved enhancements. (orig.)

  8. Fission and fragmentation of silver and bromine nuclei by 1-6 GeV energy photons

    International Nuclear Information System (INIS)

    Pinheiro Filho, J. de D.

    1983-01-01

    Fission and fragmentation of silver and bromine nuclei induced by bremsstrahlung photons in the maximum energy range of 1-6 GeV are studied. A special technique of nuclear emulsion for the highly ionizing nuclear fragment detection is used in the discrimination between nuclear fission and fragmentation events. Films of Ilford-KO nuclear emulsion (approximatelly 10 20 atoms/cm 2 of Ag, Br) which had been exposed to bremsstrahlung beams in 'Deutsches Elektronen Synchrotron' (DESY, Hamburg) with total doses of approximatelly 10 11 equivalent photons are used. Through a detailed analysis of range, angular and angle between fragment distributions, and empirical relations which permit to estimate nuclear fragment energy, range and velocity, the discrimination between fission and fragmentation events is made. Results related to fragment range distribution, angular distribution, distribution of angle between fragments, distribution of ratio between ranges, velocity distributions, forward/backward ratio, fission and fragmentation cross sections, nuclear fissionability and ternary fission frequency are presented and discussed. The results show that the mean photofragmentation cross section in the internal 1-6 GeV (0,09+-0,02mb) is significant when compared to the photofission (0,29+-0,05mb). It is also shown that the mean photofission cross section between 1 and 6 GeV is great by a factor of approximatelly 10 when compared to the foreseen by the cascade-evaporation nuclear model for monoenergetic photons of 0,6 GeV. (L.C.) [pt

  9. Highlights from e-EPS: New milestone reached for the European XFEL construction

    CERN Multimedia

    Jorge Rivero González

    2013-01-01

    e-EPS News is an addition to the CERN Bulletin line-up, showcasing articles from e-EPS – the European Physical Society newsletter – as part of a collaboration between the two publications.   In June 2013 an important milestone was reached for the European X-ray free-electron laser [XFEL] with the completion of its underground portion. Located in the Hamburg area (Germany), the European XFEL is one of the largest and most ambitious European projects to date. Starting full operations in 2016, the European XFEL is expected to generate intensive, ultrashort X-ray flashes that will open up entirely new areas of research with X-rays that are currently inaccessible. Organisations from 12 European countries, Denmark, France, Germany, Greece, Hungary, Italy, Poland, Russia, Slovakia, Spain, Sweden and Switzerland are members of the European XFEL consortium, with the Deutsches Elektronen-Synchrotron [DESY] as the main shareholder. The total length of the facility will be 3.4km and ...

  10. Aerogel Cerenkov counters at DESY

    International Nuclear Information System (INIS)

    Poelz, G.

    1984-11-01

    In high energy physics it is common to identify a charged particle and its kinematical parameters by the measurement of its momentum and its velocity. Cerenkov detectors have developed into a standard tool because they operate in the γ = (1-β 2 )sup(-1/2) range from about 1 to 100 which is not easily accessible by other devices. Pions, kaons and protons in present high energy experiments reach energies of several GeV. Threshold Cerenkov detectors for these particles need indices of refraction below 1.1 which are often produced with gases under high pressure. The design for chambers operating in this region was drasticly simplified when porous materials serving as Cerenkov radiators were invented. These chambers complement the time-of-flight counters, which cover the low energy region. Aerogel of silica is up to now the only porous substance with sufficient optical transparency. Its quality has been improved substantially in recent times so that large size detectors can be constructed. (orig.)

  11. Age and Scientific Performance.

    Science.gov (United States)

    Cole, Stephen

    1979-01-01

    The long-standing belief that age is negatively associated with scientific productivity and creativity is shown to be based upon incorrect analysis of data. Studies reported in this article suggest that the relationship between age and scientific performance is influenced by the operation of the reward system. (Author)

  12. Scientific Notation Watercolor

    Science.gov (United States)

    Linford, Kyle; Oltman, Kathleen; Daisey, Peggy

    2016-01-01

    (Purpose) The purpose of this paper is to describe visual literacy, an adapted version of Visual Thinking Strategy (VTS), and an art-integrated middle school mathematics lesson about scientific notation. The intent of this lesson was to provide students with a real life use of scientific notation and exponents, and to motivate them to apply their…

  13. Scientific rigor through videogames.

    Science.gov (United States)

    Treuille, Adrien; Das, Rhiju

    2014-11-01

    Hypothesis-driven experimentation - the scientific method - can be subverted by fraud, irreproducibility, and lack of rigorous predictive tests. A robust solution to these problems may be the 'massive open laboratory' model, recently embodied in the internet-scale videogame EteRNA. Deploying similar platforms throughout biology could enforce the scientific method more broadly. Copyright © 2014 Elsevier Ltd. All rights reserved.

  14. Rediscovering the scientific ethos

    DEFF Research Database (Denmark)

    Djørup, Stine

    The doctoral dissertation discusses some of the moral standards of good scientific practice that areunderexposed in the literature. In particular, attempts are made to correct the conceptual confusionsurrounding the norm of 'disinterestedness' in science (‘uhildethed’), and the norm of scientific...

  15. NIC symposium 2012. 25 years HLRZ/NIC. Proceedings

    International Nuclear Information System (INIS)

    Binder, Kurt

    2012-01-01

    Stuttgart, and (in Europe) the Partnership for High Performance Computing in Europe (PRACE). In fact, the successful experience of NIC has served as a role model for this joint European effort, which now is hosted by France, Italy and Spain in addition to Germany. Actually, by now 22 of the 27 member states of the EU have joined PRACE in order to profit from the advances that supercomputing offers for basic science and technology. In fact, in the last two years a significant fraction of the supercomputer resources at JSC have been given to PRACE, and have fertilised research on an even broader range of topics. The first PRACE projects have been finished since a couple of months, and very important results can be expected. The John von Neumann Institute for Computing operates on the basis of a cooperation agreement between three research centres of the Helmholtz association, namely Forschungszentrum Juelich, Deutsches Elektronen-Synchrotron (DESY) Hamburg and the Gesellschaft fuer Schwerionenforschung Darmstadt (GSI). A very important ingredient of this research is that these institutions sponsor NIC research groups, where specific knowhow on computer simulation techniques relevant for topical research at supercomputers is developed further. The present volume contains brief reports from these groups; at Juelich the NIC research group devoted to ''Computational Materials Physics'', headed by M. Mueser from the Universitaet des Saarlandes at Saarbruecken, has started its work on April 1st, 2011.

  16. NIC symposium 2012. 25 years HLRZ/NIC. Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Binder, Kurt [Mainz Univ. (Germany). Inst. fuer Physik; Muenster, Gernot [Muenster Univ. (Germany). Inst. fuer Theoretische Physik 1; Kremer, Manfred [Forschungszentrum Juelich GmbH (DE). Juelich Supercomputing Centre (JSC)

    2012-08-07

    and Stuttgart, and (in Europe) the Partnership for High Performance Computing in Europe (PRACE). In fact, the successful experience of NIC has served as a role model for this joint European effort, which now is hosted by France, Italy and Spain in addition to Germany. Actually, by now 22 of the 27 member states of the EU have joined PRACE in order to profit from the advances that supercomputing offers for basic science and technology. In fact, in the last two years a significant fraction of the supercomputer resources at JSC have been given to PRACE, and have fertilised research on an even broader range of topics. The first PRACE projects have been finished since a couple of months, and very important results can be expected. The John von Neumann Institute for Computing operates on the basis of a cooperation agreement between three research centres of the Helmholtz association, namely Forschungszentrum Juelich, Deutsches Elektronen-Synchrotron (DESY) Hamburg and the Gesellschaft fuer Schwerionenforschung Darmstadt (GSI). A very important ingredient of this research is that these institutions sponsor NIC research groups, where specific knowhow on computer simulation techniques relevant for topical research at supercomputers is developed further. The present volume contains brief reports from these groups; at Juelich the NIC research group devoted to ''Computational Materials Physics'', headed by M. Mueser from the Universitaet des Saarlandes at Saarbruecken, has started its work on April 1st, 2011.

  17. Department of Nuclear Reactions - Overview

    International Nuclear Information System (INIS)

    Rusek, K.

    2009-01-01

    Full text: Our activity in 2008 has focused on well-established domains of research: nuclear and atomic physics, and applications. · As far as nuclear physics is concerned; our interests are very broad, ranging from the structure of the nucleon to the structure of the nucleus including high-energy multifragmentation studies. Our colleagues led by Prof. Pawel Zupranski, members of the HERMES collaboration that comprises 32 institutions from eleven countries at the Deutsches Elektronen Synchrotron (DESY) in Hamburg, worked last year on the extraction of Spin Density Matrix Elements of vector mesons from scattering experiments on hydrogen targets. They also studied the distribution of quarks and gluons in nucleon. A team led by Prof. B. Zwieglinski was involved in the large-scale international collaboration PANDA (antiProton ANnihilation at DArmstadt). They studied the response of cooled PWO scintillators irradiated by gammas in the energy range of 4-20 MeV. The gammas were produced radiative proton capture on light by nuclei using a proton beam from the Van de Graaff accelerator of our Department. As a result, an important extrapolation of measurements performed by another group of physicists at much higher γ-ray energies was obtained. Low energy nuclear physics experiments were continued at the Heavy Ion Laboratory of Warsaw University in collaboration with foreign institutions: the University of Jyvaeskylae, the Institute of Nuclear Research of the Ukrainian Academy of Science and the Institute de Recherches Subatomique in Strasbourg. At high energies, a study of the isospin - dependence of the caloric curve was performed by the ALADIN Collaboration in a series of experiments at GSI - Darmstadt using radioactive beams of Sn and La. It was found that the asymmetry due to isospin is very weak. · Atomic physics studies were devoted to ionisation of heavy atoms by oxygen ions from the tandem accelerator of Erlangen-Nuernberg University. X-rays generated in the

  18. Department of Nuclear Reactions - Overview

    Energy Technology Data Exchange (ETDEWEB)

    Rusek, K [The Andrzej Soltan Institute for Nuclear Studies, Swierk-Otwock (Poland)

    2009-07-01

    Full text: Our activity in 2008 has focused on well-established domains of research: nuclear and atomic physics, and applications. {center_dot} As far as nuclear physics is concerned; our interests are very broad, ranging from the structure of the nucleon to the structure of the nucleus including high-energy multifragmentation studies. Our colleagues led by Prof. Pawel Zupranski, members of the HERMES collaboration that comprises 32 institutions from eleven countries at the Deutsches Elektronen Synchrotron (DESY) in Hamburg, worked last year on the extraction of Spin Density Matrix Elements of vector mesons from scattering experiments on hydrogen targets. They also studied the distribution of quarks and gluons in nucleon. A team led by Prof. B. Zwieglinski was involved in the large-scale international collaboration PANDA (antiProton ANnihilation at DArmstadt). They studied the response of cooled PWO scintillators irradiated by gammas in the energy range of 4-20 MeV. The gammas were produced radiative proton capture on light by nuclei using a proton beam from the Van de Graaff accelerator of our Department. As a result, an important extrapolation of measurements performed by another group of physicists at much higher {gamma}-ray energies was obtained. Low energy nuclear physics experiments were continued at the Heavy Ion Laboratory of Warsaw University in collaboration with foreign institutions: the University of Jyvaeskylae, the Institute of Nuclear Research of the Ukrainian Academy of Science and the Institute de Recherches Subatomique in Strasbourg. At high energies, a study of the isospin - dependence of the caloric curve was performed by the ALADIN Collaboration in a series of experiments at GSI - Darmstadt using radioactive beams of Sn and La. It was found that the asymmetry due to isospin is very weak. {center_dot} Atomic physics studies were devoted to ionisation of heavy atoms by oxygen ions from the tandem accelerator of Erlangen-Nuernberg University. X

  19. NIC symposium 2012. 25 years HLRZ/NIC. Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Binder, Kurt [Mainz Univ. (Germany). Inst. fuer Physik; Muenster, Gernot [Muenster Univ. (Germany). Inst. fuer Theoretische Physik 1; Kremer, Manfred (eds.) [Forschungszentrum Juelich GmbH (DE). Juelich Supercomputing Centre (JSC)

    2012-08-07

    Supercomputing (GCS), an alliance of the three German national supercomputing centres in Juelich, Garching and Stuttgart, and (in Europe) the Partnership for High Performance Computing in Europe (PRACE). In fact, the successful experience of NIC has served as a role model for this joint European effort, which now is hosted by France, Italy and Spain in addition to Germany. Actually, by now 22 of the 27 member states of the EU have joined PRACE in order to profit from the advances that supercomputing offers for basic science and technology. In fact, in the last two years a significant fraction of the supercomputer resources at JSC have been given to PRACE, and have fertilised research on an even broader range of topics. The first PRACE projects have been finished since a couple of months, and very important results can be expected. The John von Neumann Institute for Computing operates on the basis of a cooperation agreement between three research centres of the Helmholtz association, namely Forschungszentrum Juelich, Deutsches Elektronen-Synchrotron (DESY) Hamburg and the Gesellschaft fuer Schwerionenforschung Darmstadt (GSI). A very important ingredient of this research is that these institutions sponsor NIC research groups, where specific knowhow on computer simulation techniques relevant for topical research at supercomputers is developed further. The present volume contains brief reports from these groups; at Juelich the NIC research group devoted to ''Computational Materials Physics'', headed by M. Mueser from the Universitaet des Saarlandes at Saarbruecken, has started its work on April 1st, 2011.

  20. The Revista Scientific

    Directory of Open Access Journals (Sweden)

    Oscar Antonio Martínez Molina

    2017-02-01

    Full Text Available The Revista Scientific aims to publish quality papers that include the perspective of analysis in educational settings. Together with www.indtec.com.ve, this electronic publication aims to promote and disseminate, with seriousness and rigor, the academic production in this field. Editorial of the new stage Revista Scientific was created with the aim of constituting a reference space for scientific research in the field of research analysis that is carried out within the universities in Latin America, once the distribution list hosted on the INDTEC platform (http://www.indtec.com.ve is consolidated as a space for dissemination and development of new ideas and initiatives. The first presentation of INDTEC Magazine was held in August 2016 in Venezuela. Thanks to the support of the INDTEC platform, SCIENTIFIC Magazine has been able to develop from the cooperative work of the people who make up its Editorial Committee, Academic Committee and Scientific Committee in Electronic Edition, and of the referees of each one of the numbers. Part of the success is due to the motivation of its co-editors and excellent professionals from different parts of the world: Argentina, Belgium, Colombia, Cuba, Ecuador, Spain, Mexico, Venezuela, which form the various committees, with enthusiasm and joy participating in this project (whose organizational structure is presented in this edition and continues in increcendo. Also, the strategy adopted to edit a monographic number from the various events organized in the framework of the universities, has contributed to provide SCIENTIFIC with a point value speaker of intellectual progress in the field of education. SCIENTIFIC Magazine is currently indexed in ISI, International Scientific Indexing, Dubai - UAE; ROAD, the Directory of Open Access Scholarly Resources (ISSN International Center, France; REVENCYT-ULA, Venezuela; Google Scholar (Google Scholar, International Index; Published in Calaméo; ISSUU; Academia

  1. Scientific meeting abstracts

    International Nuclear Information System (INIS)

    1999-01-01

    The document is a collection of the scientific meeting abstracts in the fields of nuclear physics, medical sciences, chemistry, agriculture, environment, engineering, different aspects of energy and presents research done in 1999 in these fields

  2. Identifying Strategic Scientific Opportunities

    Science.gov (United States)

    As NCI's central scientific strategy office, CRS collaborates with the institute's divisions, offices, and centers to identify research opportunities to advance NCI's vision for the future of cancer research.

  3. Visualization in scientific computing

    National Research Council Canada - National Science Library

    Nielson, Gregory M; Shriver, Bruce D; Rosenblum, Lawrence J

    1990-01-01

    The purpose of this text is to provide a reference source to scientists, engineers, and students who are new to scientific visualization or who are interested in expanding their knowledge in this subject...

  4. The Scientific Enterprise

    Indian Academy of Sciences (India)

    Srimath

    The phrase pre-modern scientific may be used to describe certain attitudes and ..... But unfortunately, in the general atmosphere of poor education and collective fears .... present day science and technology that old time beliefs and traditional ...

  5. WITHER SCIENTIFIC AND TECHNOLOGICAL

    African Journals Online (AJOL)

    No library or information service and especially in a developing .... Good public relations, consultancy services including bilateral and ... project proposal for the creation of a scientific and technological information ... For example, in 1995 the ...

  6. Shaping a Scientific Self

    DEFF Research Database (Denmark)

    Andrade-Molina, Melissa; Valero, Paola

    us to understand how a truth is reproduced, circulating among diverse fields of human knowledge. Also it will show why we accept and reproduce a particular discourse. Finally, we state Euclidean geometry as a truth that circulates in scientific discourse and performs a scientific self. We unfold...... the importance of having students following the path of what schools perceive a real scientist is, no to become a scientist, but to become a logical thinker, a problem solver, a productive citizen who uses reason....

  7. Scientific information processing procedures

    Directory of Open Access Journals (Sweden)

    García, Maylin

    2013-07-01

    Full Text Available The paper systematizes several theoretical view-points on scientific information processing skill. It decomposes the processing skills into sub-skills. Several methods such analysis, synthesis, induction, deduction, document analysis were used to build up a theoretical framework. Interviews and survey to professional being trained and a case study was carried out to evaluate the results. All professional in the sample improved their performance in scientific information processing.

  8. Open scientific communication urged

    Science.gov (United States)

    Richman, Barbara T.

    In a report released last week the National Academy of Sciences' Panel on Scientific Communication and National Security concluded that the ‘limited and uncertain benefits’ of controls on the dissemination of scientific and technological research are ‘outweighed by the importance of scientific progress, which open communication accelerates, to the overall welfare of the nation.’ The 18-member panel, chaired by Dale R. Corson, president emeritus of Cornell University, was created last spring (Eos, April 20, 1982, p. 241) to examine the delicate balance between open dissemination of scientific and technical information and the U.S. government's desire to protect scientific and technological achievements from being translated into military advantages for our political adversaries.The panel dealt almost exclusively with the relationship between the United States and the Soviet Union but noted that there are ‘clear problems in scientific communication and national security involving Third World countries.’ Further study of this matter is necessary.

  9. Scientific computer simulation review

    International Nuclear Information System (INIS)

    Kaizer, Joshua S.; Heller, A. Kevin; Oberkampf, William L.

    2015-01-01

    Before the results of a scientific computer simulation are used for any purpose, it should be determined if those results can be trusted. Answering that question of trust is the domain of scientific computer simulation review. There is limited literature that focuses on simulation review, and most is specific to the review of a particular type of simulation. This work is intended to provide a foundation for a common understanding of simulation review. This is accomplished through three contributions. First, scientific computer simulation review is formally defined. This definition identifies the scope of simulation review and provides the boundaries of the review process. Second, maturity assessment theory is developed. This development clarifies the concepts of maturity criteria, maturity assessment sets, and maturity assessment frameworks, which are essential for performing simulation review. Finally, simulation review is described as the application of a maturity assessment framework. This is illustrated through evaluating a simulation review performed by the U.S. Nuclear Regulatory Commission. In making these contributions, this work provides a means for a more objective assessment of a simulation’s trustworthiness and takes the next step in establishing scientific computer simulation review as its own field. - Highlights: • We define scientific computer simulation review. • We develop maturity assessment theory. • We formally define a maturity assessment framework. • We describe simulation review as the application of a maturity framework. • We provide an example of a simulation review using a maturity framework

  10. Scientific collaboratories in higher education

    DEFF Research Database (Denmark)

    Sonnenwald, Diane H.; Li, Bin

    2003-01-01

    Scientific collaboratories hold the promise of providing students access to specialized scientific instruments, data and experts, enabling learning opportunities perhaps otherwise not available. However, evaluation of scientific collaboratories in higher education has lagged behind...

  11. Making better scientific figures

    Science.gov (United States)

    Hawkins, Ed; McNeall, Doug

    2016-04-01

    In the words of the UK government chief scientific adviser "Science is not finished until it's communicated" (Walport 2013). The tools to produce good visual communication have never been so easily accessible to scientists as at the present. Correspondingly, it has never been easier to produce and disseminate poor graphics. In this presentation, we highlight some good practice and offer some practical advice in preparing scientific figures for presentation to peers or to the public. We identify common mistakes in visualisation, including some made by the authors, and offer some good reasons not to trust defaults in graphics software. In particular, we discuss the use of colour scales and share our experiences in running a social media campaign (http://tiny.cc/endrainbow) to replace the "rainbow" (also "jet", or "spectral") colour scale as the default in (climate) scientific visualisation.

  12. Plagiarism in scientific publishing.

    Science.gov (United States)

    Masic, Izet

    2012-12-01

    Scientific publishing is the ultimate product of scientist work. Number of publications and their quoting are measures of scientist success while unpublished researches are invisible to the scientific community, and as such nonexistent. Researchers in their work rely on their predecessors, while the extent of use of one scientist work, as a source for the work of other authors is the verification of its contributions to the growth of human knowledge. If the author has published an article in a scientific journal it cannot publish the article in any other journal h with a few minor adjustments or without quoting parts of the first article, which are used in another article. Copyright infringement occurs when the author of a new article with or without the mentioning the author used substantial portions of previously published articles, including tables and figures. Scientific institutions and universities should,in accordance with the principles of Good Scientific Practice (GSP) and Good Laboratory Practices (GLP) have a center for monitoring,security, promotion and development of quality research. Establish rules and compliance to rules of good scientific practice are the obligations of each research institutions,universities and every individual-researchers,regardless of which area of science is investigated. In this way, internal quality control ensures that a research institution such as a university, assume responsibility for creating an environment that promotes standards of excellence, intellectual honesty and legality. Although the truth should be the aim of scientific research, it is not guiding fact for all scientists. The best way to reach the truth in its study and to avoid the methodological and ethical mistakes is to consistently apply scientific methods and ethical standards in research. Although variously defined plagiarism is basically intended to deceive the reader's own scientific contribution. There is no general regulation of control of

  13. PLAGIARISM IN SCIENTIFIC PUBLISHING

    Science.gov (United States)

    Masic, Izet

    2012-01-01

    Scientific publishing is the ultimate product of scientist work. Number of publications and their quoting are measures of scientist success while unpublished researches are invisible to the scientific community, and as such nonexistent. Researchers in their work rely on their predecessors, while the extent of use of one scientist work, as a source for the work of other authors is the verification of its contributions to the growth of human knowledge. If the author has published an article in a scientific journal it cannot publish the article in any other journal h with a few minor adjustments or without quoting parts of the first article, which are used in another article. Copyright infringement occurs when the author of a new article with or without the mentioning the author used substantial portions of previously published articles, including tables and figures. Scientific institutions and universities should,in accordance with the principles of Good Scientific Practice (GSP) and Good Laboratory Practices (GLP) have a center for monitoring,security, promotion and development of quality research. Establish rules and compliance to rules of good scientific practice are the obligations of each research institutions,universities and every individual-researchers,regardless of which area of science is investigated. In this way, internal quality control ensures that a research institution such as a university, assume responsibility for creating an environment that promotes standards of excellence, intellectual honesty and legality. Although the truth should be the aim of scientific research, it is not guiding fact for all scientists. The best way to reach the truth in its study and to avoid the methodological and ethical mistakes is to consistently apply scientific methods and ethical standards in research. Although variously defined plagiarism is basically intended to deceive the reader’s own scientific contribution. There is no general regulation of control of

  14. NASA's Scientific Visualization Studio

    Science.gov (United States)

    Mitchell, Horace G.

    2003-01-01

    Since 1988, the Scientific Visualization Studio(SVS) at NASA Goddard Space Flight Center has produced scientific visualizations of NASA s scientific research and remote sensing data for public outreach. These visualizations take the form of images, animations, and end-to-end systems and have been used in many venues: from the network news to science programs such as NOVA, from museum exhibits at the Smithsonian to White House briefings. This presentation will give an overview of the major activities and accomplishments of the SVS, and some of the most interesting projects and systems developed at the SVS will be described. Particular emphasis will be given to the practices and procedures by which the SVS creates visualizations, from the hardware and software used to the structures and collaborations by which products are designed, developed, and delivered to customers. The web-based archival and delivery system for SVS visualizations at svs.gsfc.nasa.gov will also be described.

  15. Recording Scientific Knowledge

    International Nuclear Information System (INIS)

    Bowker, Geof

    2006-01-01

    The way we record knowledge, and the web of technical, formal, and social practices that surrounds it, inevitably affects the knowledge that we record. The ways we hold knowledge about the past - in handwritten manuscripts, in printed books, in file folders, in databases - shape the kind of stories we tell about that past. In this talk, I look at how over the past two hundred years, information technology has affected the nature and production of scientific knowledge. Further, I explore ways in which the emergent new cyberinfrastructure is changing our relationship to scientific practice.

  16. Usability in Scientific Databases

    Directory of Open Access Journals (Sweden)

    Ana-Maria Suduc

    2012-07-01

    Full Text Available Usability, most often defined as the ease of use and acceptability of a system, affects the users' performance and their job satisfaction when working with a machine. Therefore, usability is a very important aspect which must be considered in the process of a system development. The paper presents several numerical data related to the history of the scientific research of the usability of information systems, as it is viewed in the information provided by three important scientific databases, Science Direct, ACM Digital Library and IEEE Xplore Digital Library, at different queries related to this field.

  17. Funding scientific open access

    International Nuclear Information System (INIS)

    Canessa, E.; Fonda, C.; Zennaro, M.

    2006-11-01

    In order to reduce the knowledge divide, more Open Access Journals (OAJ) are needed in all languages and scholarly subject areas that exercise peer-review or editorial quality control. To finance needed costs, it is discussed why and how to sell target specific advertisement by associating ads to given scientific keywords. (author)

  18. Scientific Report 2007

    International Nuclear Information System (INIS)

    2009-09-01

    This annual scientific report gives an concise overview of research and development activities at the Belgian Nuclear Research Centre SCK-CEN in 2007. The report discusses progress and main achievements in the following areas: reactor safety, radioactive waste and clean-up, radiation protection, the BR2 reactor, nuclear research and society, managing nuclear knowledge and fusion research

  19. Report of scientific results

    International Nuclear Information System (INIS)

    1978-01-01

    The findings of R+D activities of the HMI radiation chemistry department in the fields of pulsed radiolysis, reaction kinematics, insulators and plastics are presented as well as the scientific publications and lectures of HMI staff and visitors including theoretical contributions, theses and dissertations, and conference papers. (HK) [de

  20. Scientific Report 2001

    International Nuclear Information System (INIS)

    2002-04-01

    The annual scientific report gives an overview of the R and D activities at the Belgian Nuclear Research Centre SCK-CEN in 2001. The report discusses progress and main achievements in four principal areas: Radiation Protection, Radioactive Waste and Clean-up, Reactor Safety and the BR2 Reactor

  1. Scientific Report 2005

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-04-15

    The annual scientific report gives a summary overview of the research and development activities at the Belgian Nuclear Research Centre SCK-CEN in 2005. The report discusses progress and main achievements in the following areas: reactor safety, radioactive waste and clean-up, radiation protection, the BR2 reactor, nuclear research and society, managing nuclear knowledge and fusion research.

  2. Dorky Poll Scientific Fears

    CERN Multimedia

    2008-01-01

    The questions posed in yesterday's posts about hopes for 2008 were half of what we were asked by the Powers That Be. The other half: What scientific development do you fear you'll be blogging or reading about in 2008?

  3. Scientific Report 2004

    International Nuclear Information System (INIS)

    2005-04-01

    The annual scientific report gives a summary overview of the research and development activities at the Belgian Nuclear Research Centre SCK-CEN in 2004. The report discusses progress and main achievements in the following areas: reactor safety, radioactive waste and clean-up, radiation protection, the BR2 reactor, nuclear research and society, managing nuclear knowledge and fusion research

  4. Scientific Report 2004

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-04-01

    The annual scientific report gives a summary overview of the research and development activities at the Belgian Nuclear Research Centre SCK-CEN in 2004. The report discusses progress and main achievements in the following areas: reactor safety, radioactive waste and clean-up, radiation protection, the BR2 reactor, nuclear research and society, managing nuclear knowledge and fusion research.

  5. Is risk analysis scientific?

    Science.gov (United States)

    Hansson, Sven Ove; Aven, Terje

    2014-07-01

    This article discusses to what extent risk analysis is scientific in view of a set of commonly used definitions and criteria. We consider scientific knowledge to be characterized by its subject matter, its success in developing the best available knowledge in its fields of study, and the epistemic norms and values that guide scientific investigations. We proceed to assess the field of risk analysis according to these criteria. For this purpose, we use a model for risk analysis in which science is used as a base for decision making on risks, which covers the five elements evidence, knowledge base, broad risk evaluation, managerial review and judgment, and the decision; and that relates these elements to the domains experts and decisionmakers, and to the domains fact-based or value-based. We conclude that risk analysis is a scientific field of study, when understood as consisting primarily of (i) knowledge about risk-related phenomena, processes, events, etc., and (ii) concepts, theories, frameworks, approaches, principles, methods and models to understand, assess, characterize, communicate, and manage risk, in general and for specific applications (the instrumental part). © 2014 Society for Risk Analysis.

  6. Scientific Medical Journal

    African Journals Online (AJOL)

    Scientific Medical Journal: an official journal of Egyptian Medical Education provides a forum for dissemination of knowledge, exchange of ideas, inform of exchange of ideas, information and experience among workers, investigators and clinicians in all disciplines of medicine with emphasis on its treatment and prevention.

  7. Scientific Report 2001

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-04-01

    The annual scientific report gives an overview of the R and D activities at the Belgian Nuclear Research Centre SCK-CEN in 2001. The report discusses progress and main achievements in four principal areas: Radiation Protection, Radioactive Waste and Clean-up, Reactor Safety and the BR2 Reactor.

  8. Assessing Scientific Performance.

    Science.gov (United States)

    Weiner, John M.; And Others

    1984-01-01

    A method for assessing scientific performance based on relationships displayed numerically in published documents is proposed and illustrated using published documents in pediatric oncology for the period 1979-1982. Contributions of a major clinical investigations group, the Childrens Cancer Study Group, are analyzed. Twenty-nine references are…

  9. Scientific Report 2006

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-09-15

    The annual scientific report gives a summary overview of the research and development activities at the Belgian Nuclear Research Centre SCK-CEN in 2006. The report discusses progress and main achievements in the following areas: reactor safety, radioactive waste and clean-up, radiation protection, the BR2 reactor, nuclear research and society, managing nuclear knowledge and fusion research.

  10. Scientific Report 2006

    International Nuclear Information System (INIS)

    2007-09-01

    The annual scientific report gives a summary overview of the research and development activities at the Belgian Nuclear Research Centre SCK-CEN in 2006. The report discusses progress and main achievements in the following areas: reactor safety, radioactive waste and clean-up, radiation protection, the BR2 reactor, nuclear research and society, managing nuclear knowledge and fusion research

  11. Scientific Report 2003

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-01-01

    The annual scientific report gives an overview of the R and D activities at the Belgian Nuclear Research Centre SCK-CEN in 2003. The report discusses progress and main achievements in the following areas: reactor safety, radioactive waste and clean-up, radiation protection, the BR2 reactor, nuclear research and society, managing nuclear knowledge, and fusion research.

  12. 3 CFR - Scientific Integrity

    Science.gov (United States)

    2010-01-01

    ... information in policymaking. The selection of scientists and technology professionals for positions in the... Administration on a wide range of issues, including improvement of public health, protection of the environment... technological findings and conclusions. If scientific and technological information is developed and used by the...

  13. Scientific Report 2005

    International Nuclear Information System (INIS)

    2006-04-01

    The annual scientific report gives a summary overview of the research and development activities at the Belgian Nuclear Research Centre SCK-CEN in 2005. The report discusses progress and main achievements in the following areas: reactor safety, radioactive waste and clean-up, radiation protection, the BR2 reactor, nuclear research and society, managing nuclear knowledge and fusion research

  14. Scientific Report 2003

    International Nuclear Information System (INIS)

    2004-01-01

    The annual scientific report gives an overview of the R and D activities at the Belgian Nuclear Research Centre SCK-CEN in 2003. The report discusses progress and main achievements in the following areas: reactor safety, radioactive waste and clean-up, radiation protection, the BR2 reactor, nuclear research and society, managing nuclear knowledge, and fusion research

  15. Mario Bunge's Scientific Realism

    Science.gov (United States)

    Cordero, Alberto

    2012-01-01

    This paper presents and comments on Mario Bunge's scientific realism. After a brief introduction in Sects. 1 and 2 outlines Bunge's conception of realism. Focusing on the case of quantum mechanics, Sect. 3 explores how his approach plays out for problematic theories. Section 4 comments on Bunge's project against the background of the current…

  16. 1995 Scientific Report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-11-01

    This annual scientific report of SCK-CEN presents a comprehensive coverage and research activities in the filed of (a) waste and site restoration (b) reactor safety and radiation protection (c) operation of BR2 Materials Testing Reactor and (d) services provided by the center (analysis for characterization of waste packages, nuclear measurements, low-level radioactivity measurements).

  17. Toward executable scientific publications

    NARCIS (Netherlands)

    Strijkers, R.J.; Cushing, R.; Vasyunin, D.; Laat, C. de; Belloum, A.S.Z.; Meijer, R.J.

    2011-01-01

    Reproducibility of experiments is considered as one of the main principles of the scientific method. Recent developments in data and computation intensive science, i.e. e-Science, and state of the art in Cloud computing provide the necessary components to preserve data sets and re-run code and

  18. 2003 Scientific Technological Report

    International Nuclear Information System (INIS)

    Prado Cuba, A.; Gayoso Caballero, C.; Robles Nique, A.; Olivera Lescano, P.

    2004-08-01

    This annual scientific-technological report provides an overview of research and development activities at Peruvian Institute of Nuclear Energy (IPEN) during the period from 1 january to 31 december, 2003. This report includes 54 papers divided in 9 subject matters: physics and nuclear chemistry, nuclear engineering, materials science, radiochemistry, industrial applications, medical applications, environmental applications, protection and radiological safety, and management aspects

  19. Scientific Tourism in Armenia

    Science.gov (United States)

    Tashchyan, Davit

    2016-12-01

    The Scientific Tourism is relatively new direction in the world, however it already has managed to gain great popularity. As it is, it has arisen in 1980s, but its ideological basis comes from the earliest periods of the human history. In Armenia, it is a completely new phenomenon and still not-understandable for many people. At global level, the Scientific Tourism has several definitions: for example, as explains the member of the scientific tourist centre of Zlovlen Mrs. Pichelerova "The essence of the scientific tourism is based on the provision of the educational, cultural and entertainment needs of a group of people of people who are interested in the same thing", which in our opinion is a very comprehensive and discreet definition. We also have our own views on this type of tourism. Our philosophy is that by keeping the total principles, we put the emphasis on the strengthening of science-individual ties. Our main emphasis is on the scientific-experimental tourism. But this does not mean that we do not take steps to other forms of tourism. Studying the global experience and combining it with our resources, we are trying to get a new interdisciplinary science, which will bring together a number of different professionals as well as individuals, and as a result will have a new lore. It is in this way that an astronomer will become an archaeologist, an archaeologist will become an astrophysicist, etc. Speaking on interdisciplinary sciences, it's worth mentioning that in recent years, the role of interdisciplinary sciences at global level every day is being considered more and more important. In these terms, tourism is an excellent platform for the creation of interdisciplinary sciences and, therefore, the preparation of corresponding scholars. Nevertheless, scientific tourism is very important for the revelation, appreciation and promotion of the country's historical-cultural heritage and scientific potential. Let us not forget either that tourism in all its

  20. Turning Scientific Presentations into Stories

    Science.gov (United States)

    Aruffo, Christopher

    2015-01-01

    To increase students' confidence in giving scientific presentations, students were shown how to present scientific findings as a narrative story. Students who were preparing to give a scientific talk attended a workshop in which they were encouraged to experience the similarities between telling a personal anecdote and presenting scientific data.…

  1. Scientific Programming in Fortran

    Directory of Open Access Journals (Sweden)

    W. Van Snyder

    2007-01-01

    Full Text Available The Fortran programming language was designed by John Backus and his colleagues at IBM to reduce the cost of programming scientific applications. IBM delivered the first compiler for its model 704 in 1957. IBM's competitors soon offered incompatible versions. ANSI (ASA at the time developed a standard, largely based on IBM's Fortran IV in 1966. Revisions of the standard were produced in 1977, 1990, 1995 and 2003. Development of a revision, scheduled for 2008, is under way. Unlike most other programming languages, Fortran is periodically revised to keep pace with developments in language and processor design, while revisions largely preserve compatibility with previous versions. Throughout, the focus on scientific programming, and especially on efficient generated programs, has been maintained.

  2. 1997 Scientific Report

    International Nuclear Information System (INIS)

    Govaerts, P.

    1998-01-01

    The 1997 Scientific Report of the Belgian Nuclear Research Centre SCK-CEN describes progress achieved in nuclear safety, radioactive waste management, radiation protection and safeguards. In the field of nuclear research, the main projects concern the behaviour of high-burnup and MOX fuel, the embrittlement of reactor pressure vessels, the irradiation-assisted stress corrosion cracking of reactor internals, and irradiation effects on materials of fusion reactors. In the field of radioactive waste management, progress in the following domains is reported: the disposal of high-level radioactive waste and spent fuel in a clay formation, the decommissioning of nuclear installations, the study of alternative waste-processing techniques. For radiation protection and safeguards, the main activities reported on are in the field of site and environmental restoration, emergency planning and response and scientific support to national and international programmes

  3. Scientific report 1999

    International Nuclear Information System (INIS)

    1999-01-01

    The aim of this report is to outline the main developments of the 'Departement des Reacteurs Nucleaires' (DRN) during the year 1999. DRN is one of the CEA Institutions. This report is divided in three main parts: the DRN scientific programs, the scientific and technical publications (with abstracts in English) and economic data on staff, budget and communication. Main results of the Department for the year 1999 are presented giving information on the simulation of low mach number compressible flow, experimental irradiation of multi-materials, progress in the dry route conversion process of UF 6 to UO 2 , the neutronics, the CASCADE installation, the corium, the BWR type reactor cores technology, the reactor safety, the transmutation of americium and fuel cell flow studies, the crack propagation, the hybrid systems and the CEA sites improvement. (A.L.B.)

  4. Scientific publications in Nepal.

    Science.gov (United States)

    Magar, A

    2012-09-01

    Scientific publications have become a mainstay of communication among readers, academicians, researchers and scientists worldwide. Although, its existence dates back to 17 th century in the West, Nepal is still struggling to take few steps towards improving its local science for last 50 years. Since the start of the first medical journal in 1963, the challenges remains as it were decades back regarding role of authors, peer reviewers, editors and even publishers in Nepal. Although, there has been some development in terms of the number of articles being published and appearances of the journals, yet there is a long way to go. This article analyzes the past and present scenario, and future perspective for scientific publications in Nepal.

  5. Sherlock Holmes: scientific detective.

    Science.gov (United States)

    Snyder, Laura J

    2004-09-01

    Sherlock Holmes was intended by his creator, Arthur Conan Doyle, to be a 'scientific detective'. Conan Doyle criticized his predecessor Edgar Allan Poe for giving his creation - Inspector Dupin - only the 'illusion' of scientific method. Conan Doyle believed that he had succeeded where Poe had failed; thus, he has Watson remark that Holmes has 'brought detection as near an exact science as it will ever be brought into the world.' By examining Holmes' methods, it becomes clear that Conan Doyle modelled them on certain images of science that were popular in mid- to late-19th century Britain. Contrary to a common view, it is also evident that rather than being responsible for the invention of forensic science, the creation of Holmes was influenced by the early development of it.

  6. Collaboration in scientific practice

    DEFF Research Database (Denmark)

    Wagenknecht, Susann

    2014-01-01

    This monograph investigates the collaborative creation of scientific knowledge in research groups. To do so, I combine philosophical analysis with a first-hand comparative case study of two research groups in experimental science. Qualitative data are gained through observation and interviews......, and I combine empirical insights with existing approaches to knowledge creation in philosophy of science and social epistemology. On the basis of my empirically-grounded analysis I make several conceptual contributions. I study scientific collaboration as the interaction of scientists within research...... to their publication. Specifically, I suggest epistemic difference and the porosity of social structure as two conceptual leitmotifs in the study of group collaboration. With epistemic difference, I emphasize the value of socio-cognitive heterogeneity in group collaboration. With porosity, I underline the fact...

  7. Scientific report 1998

    International Nuclear Information System (INIS)

    1998-01-01

    The aim of this report is to outline the main developments of the ''Departement des Reacteurs Nucleaires'', (DRN) during the year 1998. DRN is one of the CEA Institution. This report is divided in three main parts: the DRN scientific programs, the scientific and technical publications (with abstracts in english) and economic data on staff, budget and communication. Main results of the Department, for the year 1998, are presented giving information on the reactors technology and safety, the neutronics, the transmutation and the hybrid systems, the dismantling and the sites improvement, the nuclear accidents, the nuclear matter transport, the thermonuclear fusion safety, the fuel cladding materials and radioactive waste control. (A.L.B.)

  8. Scientific Resource EXplorer

    Science.gov (United States)

    Xing, Z.; Wormuth, A.; Smith, A.; Arca, J.; Lu, Y.; Sayfi, E.

    2014-12-01

    Inquisitive minds in our society are never satisfied with curatedimages released by a typical public affairs office. They always want tolook deeper and play directly on original data. However, most scientificdata products are notoriously hard to use. They are immensely large,highly distributed and diverse in format. In this presentation,we will demonstrate Resource EXplorer (REX), a novel webtop applicationthat allows anyone to conveniently explore and visualize rich scientificdata repositories, using only a standard web browser. This tool leverageson the power of Webification Science (w10n-sci), a powerful enabling technologythat simplifies the use of scientific data on the web platform.W10n-sci is now being deployed at an increasing number of NASA data centers,some of which are the largest digital treasure troves in our nation.With REX, these wonderful scientific resources are open for teachers andstudents to learn and play.

  9. Professional scientific blog

    Directory of Open Access Journals (Sweden)

    Tamás Beke

    2009-03-01

    Full Text Available The professional blog is a weblog that on the whole meets the requirements of scientific publication. In my opinion it bear a resemblance to digital notice board, where the competent specialists of the given branch of science can place their ideas, questions, possible solutions and can raise problems. Its most important function can be collectivization of the knowledge. In this article I am going to examine the characteristics of the scientific blog as a genre. Conventional learning counts as a rather solitary activity. If the students have access to the materials of each other and of the teacher, their sense of solitude diminishes and this model is also closer to the constructivist approach that features the way most people think and learn. Learning does not mean passively collecting tiny pieces of knowledge; it much more esembles ‘spinning a conceptual net’ which is made up by the experiences and observations of the individual. With the spreading of the Internet more universities and colleges worldwide gave a try to on-line educational methods, but the most efficient one has not been found yet. The publication of the curriculum (the material of the lectures and the handling of the electronic mails are not sufficient; much more is needed for collaborative learning. Our scholastic scientific blog can be a sufficient field for the start of a knowledge-building process based on cooperation. In the Rocard-report can be read that for the future of Europe it is crucial to develop the education of the natural sciences, and for this it isnecessary to act on local, regional, national and EU-level. To the educational processes should be involved beyond the traditional actors (child, parent, teacher also others (scientists, professionals, universities, local institutions, the actors of the economic sphere, etc.. The scholastic scientific blog answer the purposes, as a collaborative knowledge-sharing forum.

  10. Scientific progress report 1980

    International Nuclear Information System (INIS)

    1981-01-01

    The R + D-projects in this field and the infrastructural tasks mentioned are handled in seven working- and two project groups: Computer systems, Numerical and applied mathematics, Software development, Process calculation systems- hardware, Nuclear electronics, measuring- and automatic control technique, Research of component parts and irradiation tests, Central data processing, Processing of process data in the science of medicine, Co-operation in the BERNET-project in the 'Wissenschaftliches Rechenzentrum Berlin (WRB)' (scientific computer center in Berlin). (orig./WB)

  11. Scientific Technological Report 2002

    International Nuclear Information System (INIS)

    Gayoso C, C.; Cuya G, T.; Robles N, A.; Prado C, A.

    2003-07-01

    This annual scientific-technological report provides an overview of research and development activities at Peruvian Institute of Nuclear Energy (IPEN) during the period from 1 january to 31 december, 2002. This report includes 58 papers divided in 10 subject matters: physics and nuclear chemistry, nuclear engineering, materials, industrial applications, biological applications, medical applications, environmental applications, protection and radiological safety, nuclear safety, and management aspects

  12. Evaluating a scientific collaboratory

    DEFF Research Database (Denmark)

    Sonnenwald, Diane H.; Whitton, Mary C.; Maglaughlin, Kelly L.

    2003-01-01

    of the system, and post-interviews to understand the participants' views of doing science under both conditions. We hypothesized that study participants would be less effective, report more difficulty, and be less favorably inclined to adopt the system when collaborating remotely. Contrary to expectations...... of collaborating remotely. While the data analysis produced null results, considered as a whole, the analysis leads us to conclude there is positive potential for the development and adoption of scientific collaboratory systems....

  13. National nuclear scientific program

    International Nuclear Information System (INIS)

    Plecas, I.; Matausek, M.V.; Neskovic, N.

    2001-01-01

    National scientific program of the Vinca Institute Nuclear Reactors And Radioactive Waste comprises research and development in the following fields: application of energy of nuclear fission, application of neutron beams, analyses of nuclear safety and radiation protection. In the first phase preparatory activities, conceptual design and design of certain processes and facilities should be accomplished. In the second phase realization of the projects is expected. (author)

  14. PROSCENIUM OF SCIENTIFIC MANAGEMENT

    Directory of Open Access Journals (Sweden)

    Vasile Berlingher

    2013-09-01

    Full Text Available During the last three decades of the nineteenth century, organizations developed rapidly, their managers began to realize that they had too frequent managerial problems; this awareness lead to a new phase of development of scientific management. Examining the titles published in that period, it can be concluded that management issues that pose interest related to payroll and payroll systems, problems exacerbated by the industrial revolution and related work efficiency. Noting that large organizations losing power, direct supervision, the managers were looking for incentives to replace this power . One of the first practitioners of this new management system was Henry R. Towne, the president of the well-known enterprise "Yale and Towne Manufacturing Company", which applied the management methods in his company workshops. Publishers of magazines "Industrial Management" and "The Engineering Magazine" stated that HR Towne is, undisputedly, the pioneer of scientific management. He initiated the systematic application of effective management methods and his famous article "The Engineer as Economist" provided to the company. "American Society of Mechanical Engineers" in 1886 was the one that probably inspired Frederick W. Taylor to devote his entire life and work in scientific management.

  15. The next scientific revolution.

    Science.gov (United States)

    Hey, Tony

    2010-11-01

    For decades, computer scientists have tried to teach computers to think like human experts. Until recently, most of those efforts have failed to come close to generating the creative insights and solutions that seem to come naturally to the best researchers, doctors, and engineers. But now, Tony Hey, a VP of Microsoft Research, says we're witnessing the dawn of a new generation of powerful computer tools that can "mash up" vast quantities of data from many sources, analyze them, and help produce revolutionary scientific discoveries. Hey and his colleagues call this new method of scientific exploration "machine learning." At Microsoft, a team has already used it to innovate a method of predicting with impressive accuracy whether a patient with congestive heart failure who is released from the hospital will be readmitted within 30 days. It was developed by directing a computer program to pore through hundreds of thousands of data points on 300,000 patients and "learn" the profiles of patients most likely to be rehospitalized. The economic impact of this prediction tool could be huge: If a hospital understands the likelihood that a patient will "bounce back," it can design programs to keep him stable and save thousands of dollars in health care costs. Similar efforts to uncover important correlations that could lead to scientific breakthroughs are under way in oceanography, conservation, and AIDS research. And in business, deep data exploration has the potential to unearth critical insights about customers, supply chains, advertising effectiveness, and more.

  16. The paradox of scientific expertise

    DEFF Research Database (Denmark)

    Alrøe, Hugo Fjelsted; Noe, Egon

    2011-01-01

    Modern societies depend on a growing production of scientific knowledge, which is based on the functional differentiation of science into still more specialised scientific disciplines and subdisciplines. This is the basis for the paradox of scientific expertise: The growth of science leads to a f...... cross-disciplinary research and in the collective use of different kinds of scientific expertise, and thereby make society better able to solve complex, real-world problems.......Modern societies depend on a growing production of scientific knowledge, which is based on the functional differentiation of science into still more specialised scientific disciplines and subdisciplines. This is the basis for the paradox of scientific expertise: The growth of science leads...... to a fragmentation of scientific expertise. To resolve this paradox, the present paper investigates three hypotheses: 1) All scientific knowledge is perspectival. 2) The perspectival structure of science leads to specific forms of knowledge asymmetries. 3) Such perspectival knowledge asymmetries must be handled...

  17. On the Possibility of a Scientific Theory of Scientific Method.

    Science.gov (United States)

    Nola, Robert

    1999-01-01

    Discusses the philosophical strengths and weaknesses of Laudan's normative naturalism, which understands the principles of scientific method to be akin to scientific hypotheses, and therefore open to test like any principle of science. Contains 19 references. (Author/WRM)

  18. Marie Curie: scientific entrepreneur

    International Nuclear Information System (INIS)

    Boudia, S.

    1998-01-01

    Marie Curie is best known for her discovery of radium one hundred years ago this month, but she also worked closely with industry in developing methods to make and monitor radioactive material, as Soraya Boudia explains. One hundred years ago this month, on 28 December 1898, Pierre Curie, Marie Sklodowska-Curie and Gustave Bemont published a paper in Comptes-rendus - the journal of the French Academy of Sciences. In the paper they announced that they had discovered a new element with astonishing properties: radium. But for one of the authors, Marie Curie, the paper was more than just the result of outstanding work: it showed that a woman could succeed in what was then very much a male-dominated scientific world. Having arrived in Paris from Poland in 1891, Marie Curie became the first woman in France to obtain a PhD in physics, the first woman to win a Nobel prize and the first woman to teach at the Sorbonne. She also helped to found a new scientific discipline: the study of radioactivity. She became an icon and a role-model for other women to follow, someone who succeeded - despite many difficulties - in imposing herself on the world of science. Although Curie's life story is a familiar and well documented one, there is one side to her that is less well known: her interaction with industry. As well as training many nuclear physicists and radiochemists in her laboratory, she also became a scientific pioneer in industrial collaboration. In this article the author describes this side of Marie Curie. (UK)

  19. Scientific (Wo)manpower?

    DEFF Research Database (Denmark)

    Amilon, Anna; Persson, Inga

    2013-01-01

    Purpose – The purpose of this paper is to investigate to what extent male and female PhDs choose academic vs non‐academic employment. Further, it analyses gender earnings differences in the academic and non‐academic labour markets. Design/methodology/approach – Rich Swedish cross‐sectional regist...... scientific human capital. Originality/value – The study is the first to investigate career‐choice and earnings of Swedish PhDs. Further, the study is the first to investigate both the academic and the non‐academic labour markets....

  20. Scientific report 1999

    International Nuclear Information System (INIS)

    2000-01-01

    This scientific report of the Fuel Cycle Direction of the Cea, presents the Direction activities and research programs in the fuel cycle domain during the year 1999. The first chapter is devoted to the front end of the fuel cycle with the SILVA process as main topic. The second chapter is largely based on the separation chemistry of the back end cycle. The third and fourth chapters present studies of more applied and sometimes more technical developments in the nuclear industry or not. (A.L.B.)

  1. Scientific report 1997

    International Nuclear Information System (INIS)

    Gosset, J.; Gueneau, C.; Doizi, D.

    1998-01-01

    In this book are found technical and scientific papers on the main works of the Direction of the Fuel Cycle (DCC) in France. The study fields are: the up-side of the nuclear fuel cycle with theoretical studies (plasma simulation) and technological developments and instrumentation (lasers diodes, carbides plasma projection, carbon 13 enrichment); the down-side nuclear fuel cycle with theoretical studies (ion Eu 3+ complexation simulation, decay simulation, uranium and plutonium diffusion study, electrolyser operating simulation), scenario studies ( recycling, wastes management), experimental studies; dismantling and cleaning (soils cleaning, surface-active agent for decontamination, fault tree analysis); analysis with expert systems and mass spectrometry. (A.L.B.)

  2. Annual scientific report 1974

    International Nuclear Information System (INIS)

    Billiau, R.; Bobin, K.; Michiels, G.; Proost, J.

    1975-01-01

    The main activities of SCK/CEN during 1974 are reported in individual summaries. Fields of research are the following: sodium cooled fast reactors, gas cooled reactors, light water reactors, applied nuclear research (including waste disposal, safeguards and fusion research), basic and exploratory research (including materials science, nuclear physics and radiobiology). The BR2 Materials testing reactor and associated facilities are described. The technical and administrative support activities are also presented. A list of publications issued by the SCK/CEN Scientific staff is given

  3. SCIENTIFIC BASIS OF DENTISTRY

    Directory of Open Access Journals (Sweden)

    Yegane GÜVEN

    2017-10-01

    Full Text Available Technological and scientific innovations have increased exponentially over the past years in the dentistry profession. In this article, these developments are evaluated both in terms of clinical practice and their place in the educational program. The effect of the biologic and digital revolutions on dental education and daily clinical practice are also reviewed. Biomimetics, personalized dental medicine regenerative dentistry, nanotechnology, high-end simulations providing virtual reality, genomic information, and stem cell studies will gain more importance in the coming years, moving dentistry to a different dimension.

  4. Annual scientific report 1975

    International Nuclear Information System (INIS)

    Billiau, R.; Bobin, K.; Michiels, G.; Proost, J.

    1976-01-01

    The main activities of SCK/CEN during 1975 are reported in individual summaries. Field of research are the following: sodium cooled fast reactors, gas cooled reactors, light water reactors, applied nuclear research (including waste disposal, safeguards and fusion research), basic and exploratory research (including materials science, nuclear physics and radiobiology). The BR2 Materials testing reactor and associated facilities are described. The technical and administrative support activities are also presented. A list of publications issued by the SCK/CEN Scientific staff is given

  5. Practical scientific computing

    CERN Document Server

    Muhammad, A

    2011-01-01

    Scientific computing is about developing mathematical models, numerical methods and computer implementations to study and solve real problems in science, engineering, business and even social sciences. Mathematical modelling requires deep understanding of classical numerical methods. This essential guide provides the reader with sufficient foundations in these areas to venture into more advanced texts. The first section of the book presents numEclipse, an open source tool for numerical computing based on the notion of MATLAB®. numEclipse is implemented as a plug-in for Eclipse, a leading integ

  6. Scientific activities 1979

    International Nuclear Information System (INIS)

    1981-01-01

    The scientific activities and achievements of the Nuclear Research Center Democritus for the year 1979 are presented in the form of a list of 78 projects giving title, objectives, commencement year, responsible of each project, developed activities and the pertaining lists of publications. The 15 chapters of this work cover the activities of the main Divisions of the Democritus NRC: Electronics, Biology, Physics, Chemistry, Health Physics, Reactor, Radioisotopes, Environmental Radioactivity, Soil Science, Computer Center, Uranium Exploration, Medical Service, Technological Applications and Training. (T.A.)

  7. Energy and scientific communication

    Science.gov (United States)

    De Sanctis, E.

    2013-06-01

    Energy communication is a paradigmatic case of scientific communication. It is particularly important today, when the world is confronted with a number of immediate, urgent problems. Science communication has become a real duty and a big challenge for scientists. It serves to create and foster a climate of reciprocal knowledge and trust between science and society, and to establish a good level of interest and enthusiasm for research. For an effective communication it is important to establish an open dialogue with the audience, and a close collaboration among scientists and science communicators. An international collaboration in energy communication is appropriate to better support international and interdisciplinary research and projects.

  8. Scientific visualization and radiology

    International Nuclear Information System (INIS)

    Lawrance, D.P.; Hoyer, C.E.; Wrestler, F.A.; Kuhn, M.J.; Moore, W.D.; Anderson, D.R.

    1989-01-01

    Scientific visualization is the visual presentation of numerical data. The National Center for Supercomputing Applications (NCSA) has developed methods for visualizing computerbased simulations of digital imaging data. The applicability of these various tools for unique and potentially medical beneficial display of MR images is investigated. Raw data are obtained from MR images of the brain, neck, spine, and brachial plexus obtained on a 1.5-T imager with multiple pulse sequences. A supercomputer and other mainframe resources run a variety of graphic and imaging programs using this data. An interdisciplinary team of imaging scientists, computer graphic programmers, an physicians works together to achieve useful information

  9. The Scientific Case against Astrology.

    Science.gov (United States)

    Kelly, Ivan

    1980-01-01

    Discussed is the lack of a scientific foundation and scientific evidence favoring astrology. Included are several research studies conducted to examine astrological tenets which yield generally negative results. (Author/DS)

  10. Expectations for a scientific collaboratory

    DEFF Research Database (Denmark)

    Sonnenwald, Diane H.

    2003-01-01

    In the past decade, a number of scientific collaboratories have emerged, yet adoption of scientific collaboratories remains limited. Meeting expectations is one factor that influences adoption of innovations, including scientific collaboratories. This paper investigates expectations scientists have...... with respect to scientific collaboratories. Interviews were conducted with 17 scientists who work in a variety of settings and have a range of experience conducting and managing scientific research. Results indicate that scientists expect a collaboratory to: support their strategic plans; facilitate management...... of the scientific process; have a positive or neutral impact on scientific outcomes; provide advantages and disadvantages for scientific task execution; and provide personal conveniences when collaborating across distances. These results both confirm existing knowledge and raise new issues for the design...

  11. Metadata in Scientific Dialects

    Science.gov (United States)

    Habermann, T.

    2011-12-01

    Discussions of standards in the scientific community have been compared to religious wars for many years. The only things scientists agree on in these battles are either "standards are not useful" or "everyone can benefit from using my standard". Instead of achieving the goal of facilitating interoperable communities, in many cases the standards have served to build yet another barrier between communities. Some important progress towards diminishing these obstacles has been made in the data layer with the merger of the NetCDF and HDF scientific data formats. The universal adoption of XML as the standard for representing metadata and the recent adoption of ISO metadata standards by many groups around the world suggests that similar convergence is underway in the metadata layer. At the same time, scientists and tools will likely need support for native tongues for some time. I will describe an approach that combines re-usable metadata "components" and restful web services that provide those components in many dialects. This approach uses advanced XML concepts of referencing and linking to construct complete records that include reusable components and builds on the ISO Standards as the "unabridged dictionary" that encompasses the content of many other dialects.

  12. Budapest scientific a guidebook

    CERN Document Server

    Hargittai, István

    2015-01-01

    This guidebook introduces the reader—the scientific tourist and others—to the visible memorabilia of science and scientists in Budapest—statues, busts, plaques, buildings, and other artefacts. According to the Hungarian–American Nobel laureate Albert Szent-Györgyi, this metropolis at the crossroads of Europe has a special atmosphere of respect for science. It has been the venue of numerous scientific achievements and the cradle, literally, of many individuals who in Hungary, and even more beyond its borders became world-renowned contributors to science and culture. Six of the eight chapters of the book cover the Hungarian Nobel laureates, the Hungarian Academy of Sciences, the university, the medical school, agricultural sciences, and technology and engineering. One chapter is about selected gimnáziums from which seven Nobel laureates (Szent-Györgyi, de Hevesy, Wigner, Gabor, Harsanyi, Olah, and Kertész) and the five “Martians of Science” (von Kármán, Szilard, Wigner, von Neumann, and Teller...

  13. Compendium of Scientific Linacs

    Energy Technology Data Exchange (ETDEWEB)

    Clendenin, James E

    2003-05-16

    The International Committee supported the proposal of the Chairman of the XVIII International Linac Conference to issue a new Compendium of linear accelerators. The last one was published in 1976. The Local Organizing Committee of Linac96 decided to set up a sub-committee for this purpose. Contrary to the catalogues of the High Energy Accelerators which compile accelerators with energies above 1 GeV, we have not defined a specific limit in energy. Microtrons and cyclotrons are not in this compendium. Also data from thousands of medical and industrial linacs has not been collected. Therefore, only scientific linacs are listed in the present compendium. Each linac found in this research and involved in a physics context was considered. It could be used, for example, either as an injector for high energy accelerators, or in nuclear physics, materials physics, free electron lasers or synchrotron light machines. Linear accelerators are developed in three continents only: America, Asia, and Europe. This geographical distribution is kept as a basis. The compendium contains the parameters and status of scientific linacs. Most of these linacs are operational. However, many facilities under construction or design studies are also included. A special mention has been made at the end for the studies of future linear colliders.

  14. Verified scientific findings

    International Nuclear Information System (INIS)

    Bullinger, M.G.

    1982-01-01

    In this essay, the author attempts to enlighten the reader as to the meaning of the term ''verified scientific findings'' in section 13, sub-section 1, sentence 2 of the new Chemicals Control Law. The examples given here are the generally accepted regulations in regards to technology (that is sections 7a and 18b of the WHG (law on water economy), section 3, sub-section 1 of the machine- and engine protection laws) and to the status of technology (section 3, sub-section 6 of the BImSchG (Fed. law on prevention of air-borne pollution)), and to the status of science (section 5, sub-section 2 of the AMG (drug legislation). The ''status of science and technology'' as defined in sections 4 ff of the Atomic Energy Law (AtomG) and in sections 3, 4, 12, 2) of the First Radiation Protection Ordinance (1.StrlSch. VO), is also being discussed. The author defines the in his opinion ''dynamic term'' as the generally recognized result of scientific research, and the respective possibilities of practical utilization of technology. (orig.) [de

  15. Drilling for scientific purpose

    Energy Technology Data Exchange (ETDEWEB)

    Tanaka, Shoichi

    1987-09-01

    Drilling for scientific purpose is a process of conducting geophysical exploration at deep underground and drilling for collecting crust samples directly. This is because earth science has advanced to get a good understanding about the top of the crust and has shifted its main interest to the lower layer of the crust in land regions. The on-land drilling plan in Japan has just started, and the planned drilling spots are areas around the Minami River, Hidaka Mts., kinds of the Mesozoic and Cenozoic granite in outside zone, the extension of Japan Sea, Ogasawara Is., Minami-Tori Is., and active volcanos. The paper also outlines the present situation of on-land drilling in the world, focusing on the SG-3rd super-deep well SG-3 on the Kola Peninsula, USSR, Satori SG-1st well SG-1 in Azerbaidzhan S.S.R, V.S.S.R, Sweden's wells, Cyprus' wells, Bayearn well Plan in West Germany, and Salton Sea Scientific Drilling Program in the U.S. At its end, the paper explains the present situation and the future theme of the Japanese drilling technique and points out the necessity of developing equipment, and techniques. (14 figs, 5 tabs, 26 refs)

  16. The Scientific Competitiveness of Nations.

    Science.gov (United States)

    Cimini, Giulio; Gabrielli, Andrea; Sylos Labini, Francesco

    2014-01-01

    We use citation data of scientific articles produced by individual nations in different scientific domains to determine the structure and efficiency of national research systems. We characterize the scientific fitness of each nation-that is, the competitiveness of its research system-and the complexity of each scientific domain by means of a non-linear iterative algorithm able to assess quantitatively the advantage of scientific diversification. We find that technological leading nations, beyond having the largest production of scientific papers and the largest number of citations, do not specialize in a few scientific domains. Rather, they diversify as much as possible their research system. On the other side, less developed nations are competitive only in scientific domains where also many other nations are present. Diversification thus represents the key element that correlates with scientific and technological competitiveness. A remarkable implication of this structure of the scientific competition is that the scientific domains playing the role of "markers" of national scientific competitiveness are those not necessarily of high technological requirements, but rather addressing the most "sophisticated" needs of the society.

  17. Should scientific realists be platonists?

    DEFF Research Database (Denmark)

    Busch, Jacob; Morrison, Joe

    2015-01-01

    an appropriate use of the resources of Scientific Realism (in particular, IBE) to achieve platonism? (§2) We argue that just because a variety of different inferential strategies can be employed by Scientific Realists does not mean that ontological conclusions concerning which things we should be Scientific...

  18. EFSA Scientific Committee; Scientific Opinion on Risk Assessment Terminology

    DEFF Research Database (Denmark)

    Hald, Tine

    of improving the expression and communication of risk and/or uncertainties in the selected opinions. The Scientific Committee concluded that risk assessment terminology is not fully harmonised within EFSA. In part this is caused by sectoral legislation defining specific terminology and international standards......The Scientific Committee of the European Food Safety Authority (EFSA) reviewed the use of risk assessment terminology within its Scientific Panels. An external report, commissioned by EFSA, analysed 219 opinions published by the Scientific Committee and Panels to recommend possible ways......, the Scientific Committee concludes that particular care must be taken that the principles of CAC, OIE or IPPC are followed strictly. EFSA Scientific Panels should identify which specific approach is most useful in dealing with their individual mandates. The Scientific Committee considered detailed aspects...

  19. Final Scientific EFNUDAT Workshop

    CERN Multimedia

    CERN. Geneva

    2010-01-01

    The Final Scientific EFNUDAT Workshop - organized by the CERN/EN-STI group on behalf of n_TOF Collaboration - will be held at CERN, Geneva (Switzerland) from 30 August to 2 September 2010 inclusive.EFNUDAT website: http://www.efnudat.euTopics of interest include: Data evaluationCross section measurementsExperimental techniquesUncertainties and covariancesFission propertiesCurrent and future facilities  International Advisory Committee: C. Barreau (CENBG, France)T. Belgya (IKI KFKI, Hungary)E. Gonzalez (CIEMAT, Spain)F. Gunsing (CEA, France)F.-J. Hambsch (IRMM, Belgium)A. Junghans (FZD, Germany)R. Nolte (PTB, Germany)S. Pomp (TSL UU, Sweden) Workshop Organizing Committee: Enrico Chiaveri (Chairman)Marco CalvianiSamuel AndriamonjeEric BerthoumieuxCarlos GuerreroRoberto LositoVasilis Vlachoudis Workshop Assistant: Géraldine Jean

  20. Scientific developments ISFD3

    Science.gov (United States)

    Schropp, M.H.I.; Soong, T.W.

    2006-01-01

    Highlights, trends, and consensus from the 63 papers submitted to the Scientific Developments theme of the Third International Symposium on Flood Defence (ISFD) are presented. Realizing that absolute protection against flooding can never be guaranteed, trends in flood management have shifted: (1) from flood protection to flood-risk management, (2) from reinforcing structural protection to lowering flood levels, and (3) to sustainable management through integrated problem solving. Improved understanding of watershed responses, climate changes, applications of GIS and remote-sensing technologies, and advanced analytical tools appeared to be the driving forces for renewing flood-risk management strategies. Technical competence in integrating analytical tools to form the basin wide management systems are demonstrated by several large, transnation models. However, analyses from social-economic-environmental points of view are found lag in general. ?? 2006 Taylor & Francis Group.

  1. Dishonesty in scientific research.

    Science.gov (United States)

    Mazar, Nina; Ariely, Dan

    2015-11-02

    Fraudulent business practices, such as those leading to the Enron scandal and the conviction of Bernard Madoff, evoke a strong sense of public outrage. But fraudulent or dishonest actions are not exclusive to the realm of big corporations or to evil individuals without consciences. Dishonest actions are all too prevalent in everyone's daily lives, because people are constantly encountering situations in which they can gain advantages by cutting corners. Whether it's adding a few dollars in value to the stolen items reported on an insurance claim form or dropping outlier data points from a figure to make a paper sound more interesting, dishonesty is part of the human condition. Here, we explore how people rationalize dishonesty, the implications for scientific research, and what can be done to foster a culture of research integrity.

  2. Dishonesty in scientific research

    Science.gov (United States)

    Mazar, Nina; Ariely, Dan

    2015-01-01

    Fraudulent business practices, such as those leading to the Enron scandal and the conviction of Bernard Madoff, evoke a strong sense of public outrage. But fraudulent or dishonest actions are not exclusive to the realm of big corporations or to evil individuals without consciences. Dishonest actions are all too prevalent in everyone’s daily lives, because people are constantly encountering situations in which they can gain advantages by cutting corners. Whether it’s adding a few dollars in value to the stolen items reported on an insurance claim form or dropping outlier data points from a figure to make a paper sound more interesting, dishonesty is part of the human condition. Here, we explore how people rationalize dishonesty, the implications for scientific research, and what can be done to foster a culture of research integrity. PMID:26524587

  3. Annual scientific report 1978

    International Nuclear Information System (INIS)

    Proost, J.; Billiau, R.; Kirk, F.

    1979-01-01

    This report of the Centre d'Etude de l'Energie Nucleaire - Studiecentrum voor Kernenergie gives a survey of the scientific and technical work done in 1978. The research areas are: 1. The sodium cooled fast reactor and namely the mixed oxide fuels, the carbide fuel, the materials development, the reprocessing, the fast reactor physics, the safety and instrumentation and the sodium technology. 2. The gas cooled reactors as gas cooled fast and high temperature reactors. 3. The light water reactors namely the BR3 reactor, the light water reactor fuels and the plutonium recycling. 4. The applied nuclear research, waste conditioning and disposal as the safeguards, the fusion research and the lithium technology. 5. The basic and exploratory research namely the materials science and the nuclear physics and finally 6. Non-nuclear research and development such as the air pollution, the pollution abatement and waste handling, the fuel cells and applied electrochemistry. (AF)

  4. Ben Franklin's Scientific Amusements

    Science.gov (United States)

    Herschbach, Dudley

    2003-04-01

    As an American icon, Benjamin Franklin is often portrayed as wise and canny in business and politics, earnestly pursuing and extolling diligence, sensible conduct, pragmatism, and good works. Also legendary are some of his inventions, particularly the lightning rod, bifocals, and an efficient wood-burning stove. The iconic image is misleading in major respects. Today, surprisingly few people appreciate that, in the 18th century, Franklin was greatly esteemed throughout Europe as a scientist (termed then a "natural philosopher.") He was hailed as the "Newton of Electricity." Indeed, until Franklin, electricity seemed more mysterious than had gravity in Newton's time, and lightning was considered the wrath of God. By his own account, Franklin's studies of electricity and many other phenomena were prompted not by practical aims, but by his playful curiosity--which often became obsessive. Also not generally appreciated is the importance of Franklin's scientific reputation in enhancing his efforts to obtain French support for the American Revolution.

  5. Ethics in Scientific Publishing

    Science.gov (United States)

    Sage, Leslie J.

    2012-08-01

    We all learn in elementary school not turn in other people's writing as if it were our own (plagiarism), and in high school science labs not to fake our data. But there are many other practices in scientific publishing that are depressingly common and almost as unethical. At about the 20 percent level authors are deliberately hiding recent work -- by themselves as well as by others -- so as to enhance the apparent novelty of their most recent paper. Some people lie about the dates the data were obtained, to cover up conflicts of interest, or inappropriate use of privileged information. Others will publish the same conference proceeding in multiple volumes, or publish the same result in multiple journals with only trivial additions of data or analysis (self-plagiarism). These shady practices should be roundly condemned and stopped. I will discuss these and other unethical actions I have seen over the years, and steps editors are taking to stop them.

  6. Annual scientific report 1977

    International Nuclear Information System (INIS)

    Proost, J.; Billiau, R.; Kirk, F.

    1978-01-01

    This report of the Centre d'Etude de l'Energie Nucleaire - Studiecentrum voor Kernenergie gives a survey of the scientific and technical work done in 1977. The research areas are: 1. The sodium cooled fast reactors and namely the mixed oxide fuels, the carbide fuel, the materials development, the reprocessing, the fast reactor physics, the safety and instrumentation and the sodium technology. 2. The gas cooled reactors as gas cooled fast and high temperature reactors. 3. The light water reactors namely the BR3 reactor, the light water reactor fuels and the plutonium recycling. 4. The applied nuclear research, waste conditioning and disposal as the safeguards, the fusion research and the lithium technology. 5. The basic and exploraty research namely the materials science and the nuclear physics and finally 6. Non-nuclear reseach and development such as the air pollution, the pollution abatement and waste handling, the fuel cells and applied electrochemistry. (AF)

  7. Annual scientific report 1976

    International Nuclear Information System (INIS)

    Billiau, R.; Kirk, F.; Proost, J.

    1977-01-01

    This report of the Centre d'Etude de l'Energie Nucleaire - Studiecentrum voor Kernenergie gives a survey of the scientific and technical work done in 1976. The research areas are: 1. The sodium cooled fast reactors and namely the mixed oxide fuels, the carbide fuel, the materials development, the reprocessing, the fast reactor physics, the safety and instrumentation and the sodium technology. 2. The gas cooled reactors as gas cooled fast and high temperature reactors. 3. The light water reactors namely the BR3 reactor, the light water reactor fuels and the plutonium recycling. 4. The applied nuclear research, waste conditioning and disposal as the safeguards, the fusion research and the lithium technology. 5. The basic and exploratory research namely the materials science and the nuclear physics and finally 6. Non-nuclear research and development such as the air pollution, the pollution abatement and waste handling, the fuel cells and applied electrochemistry

  8. Annual scientific report 1980

    International Nuclear Information System (INIS)

    Billiau, R.; Proost, J.

    This report of the Centre d'Etude de l'Energie Nucleaire - Studiecentrum voor Kernenergie - gives a survey of the scientific and technical work done in 1980. The research areas are: 1. The sodium cooled fast reactor and namely the mixed oxide fuels, the carbide fuel, the materials development, the reprocessing, the fast reactor physics; the safety and instrumentation and the sodium technology. 2. The gas cooled reactors as gas cooled fast and high temperature reactors. 3. The light water reactors, namely the BR3 reactor, the light water reactor fuels and the plutonium recycling. 4. The applied nuclear research, waste conditioning and disposal as the safeguards, the fusion research and the lithium technology. 5. The basis and exploratory research namely the materials science and the nuclear physics and finally 6. Non-nuclear research and development such as the air pollution, the pollution abatement and waste handling, the fuel cells and applied electrochemistry. (AF)

  9. Scientific journal cancellations

    CERN Multimedia

    The Library

    2001-01-01

    Earlier this year the Scientific Information Policy Board (SIPB) requested the Library and the Working Group for Acquisitions to revise the current printed journal collection in order to cancel those titles that are less required. Savings could then be used for the development of other collections and particularly electronic resources needed to support CERN current research activities. A list of proposed cancellations was drawn and posted on the Library web pages: http://library.cern.ch/library_general/cancel.html The SIPB invites every one to check if any of the titles are of importance to their work, in which case you are invited to inform the Library before the 25th of September by sending an e-mail to: eliane.chaney@cern.ch Titles not reconsidered by the users will be cancelled by the end of the year. Thank you, The Library

  10. Apollo's scientific legacy

    International Nuclear Information System (INIS)

    Meadows, J.

    1979-01-01

    The scientific value and importance of the Apollo lunar programme is assessed in the light of data obtained both from the lunar surface itself and also from the command modules which orbited above. It is stated that much of the material they returned still awaits a detailed examination and that the cooperative teams set up to handle the lunar material have established new methods and standards of analysis, which are currently revitalising the old science of meteoritics. The new forms of organised research have also been carried over in the rapidly developing subject of planetary science. It is concluded that whatever the motives for launching the Apollo missions, planetary scientists have been in a much better position to understand the Solar System since then. (UK)

  11. The Uncertain of Scientific Process

    Directory of Open Access Journals (Sweden)

    Jovina dÁvila Bordoni

    2016-10-01

    Full Text Available The study assesses the existence of certainty in the scientific process, it seeks the truth, however, faced with the unknown, causes uncertainties and doubts. We used the bibliographical research, in which it systematized the scientific literature on epistemology and knowledge related to the scientific process and the uncertainties that surround him. The scientific process, though continuously seeks the truth, will not attain perfection, because the researcher deals with the unknown. The science seeks constantly new knowledge and progress with the criticism of the mistakes, seeks the truth, however these are provisional. It is concluded that all scientific knowledge is uncertain.

  12. Designing scientific applications on GPUs

    CERN Document Server

    Couturier, Raphael

    2013-01-01

    Many of today's complex scientific applications now require a vast amount of computational power. General purpose graphics processing units (GPGPUs) enable researchers in a variety of fields to benefit from the computational power of all the cores available inside graphics cards.Understand the Benefits of Using GPUs for Many Scientific ApplicationsDesigning Scientific Applications on GPUs shows you how to use GPUs for applications in diverse scientific fields, from physics and mathematics to computer science. The book explains the methods necessary for designing or porting your scientific appl

  13. PSI Scientific report 2009

    International Nuclear Information System (INIS)

    Piwnicki, P.

    2010-04-01

    This annual report issued by the Paul Scherrer Institute (PSI) in Switzerland takes a look at work done at the institute in the year 2009. In particular, the SwissFEL X-ray Laser facility that will allow novel investigations of femtosecond molecular dynamics in chemical, biochemical and condensed-matter systems and permit coherent diffraction imaging of individual nanostructures is commented on. Potential scientific applications of the SwissFEL are noted. Further, the institute's research focus and its findings are commented on. Synchrotron light is looked at and results obtained using neutron scattering and muon spin resonance are reported on. Work done in the micro and nano-technology, biomolecular research and radiopharmacy areas is also reported on Work performed in the biology, general energy and environmental sciences area is also reported on. The institute's comprehensive research facilities are reviewed and the facilities provided for users from the national and international scientific community, in particular regarding condensed matter, materials science and biology research are noted. In addition to the user facilities at the accelerators, other PSI laboratories are also open to external users, e.g. the Hot Laboratory operated by the Nuclear Energy and Safety Department that allows experiments to be performed on highly radioactive samples. The Technology Transfer Office at PSI is also reported on. This department assists representatives from industry in their search for opportunities and sources of innovation at the PSI. Further, an overview is presented of the people who work at the PSI, how the institute is organised and how the money it receives is distributed and used. Finally, a comprehensive list of publications completes the report

  14. Paul Scherrer Institute Scientific Report 1999. Volume I: Particles and Matter

    International Nuclear Information System (INIS)

    Gobrecht, J.; Gaeggeler, H.; Herlach, D.; Junker, K.; Kettle, P.-R.; Kubik, P.; Zehnder, A.

    2000-01-01

    Although originally planned for fundamental research in nuclear physics, the particle beams of pions, muons, protons and neutrons are now used in a large variety of disciplines in both natural science and medicine. The beams at PSI have the world's highest intensities and therefore allow certain experiments to be performed, which would not be possible elsewhere. The highlight of research this year was the first-ever determination of the chemical properties of the superheavy element 107 Bohrium. This was undertaken, by an international team led by H. Gaeggeler of PSI's Laboratory for Radiochemistry. Bohrium was produced by bombarding a Berkelium target with Neon ions from the Injector I cyclotron and six atoms were detected after having passed through an online gas chromatography device. At the Laboratory for Particle Physics the focus has shifted from nuclear physics to elementary particle physics with about a fifty-fifty split between investigations of rare processes or particle decays using the high intensity muon, pion and recently also polarized neutron beams of PSI, and research at the highest energy frontier at CERN (Geneva) and DESY (Hamburg). Important space instrumentation has been contributed by the Laboratory for Astrophysics to the European Space Agency and NASA satellite programmes. The Laboratory for Micro and Nanotechnology continued to focus on research into molecular nanotechnology and SiGeC nanostructures, the latter with the aim of producing silicon based optoelectronics. Progress in 1999 in these topical areas is described in this report. A list of scientific publications in 1999 is also provided

  15. Paul Scherrer Institute Scientific Report 1999. Volume I: Particles and Matter

    Energy Technology Data Exchange (ETDEWEB)

    Gobrecht, J; Gaeggeler, H; Herlach, D; Junker, K; Kettle, P -R; Kubik, P; Zehnder, A [eds.

    2000-07-01

    lthough originally planned for fundamental research in nuclear physics, the particle beams of pions, muons, protons and neutrons are now used in a large variety of disciplines in both natural science and medicine. The beams at PSI have the world's highest intensities and therefore allow certain experiments to be performed, which would not be possible elsewhere. The highlight of research this year was the first-ever determination of the chemical properties of the superheavy element {sup 107} Bohrium. This was undertaken, by an international team led by H. Gaeggeler of PSI's Laboratory for Radiochemistry. Bohrium was produced by bombarding a Berkelium target with Neon ions from the Injector I cyclotron and six atoms were detected after having passed through an online gas chromatography device. At the Laboratory for Particle Physics the focus has shifted from nuclear physics to elementary particle physics with about a fifty-fifty split between investigations of rare processes or particle decays using the high intensity muon, pion and recently also polarized neutron beams of PSI, and research at the highest energy frontier at CERN (Geneva) and DESY (Hamburg). Important space instrumentation has been contributed by the Laboratory for Astrophysics to the European Space Agency and NASA satellite programmes. The Laboratory for Micro and Nanotechnology continued to focus on research into molecular nanotechnology and SiGeC nanostructures, the latter with the aim of producing silicon based optoelectronics. Progress in 1999 in these topical areas is described in this report. A list of scientific publications in 1999 is also provided.

  16. Evolution of the scientific paper

    Energy Technology Data Exchange (ETDEWEB)

    Harmon, J.E.

    1992-09-01

    The first papers reporting original research results in technical periodicals and proceedings appeared in the late 17th century. Since that time, the typical scientific paper has evolved from a fairly simple document, accessible to a general audience, to a much more complex one, aimed at a specialized audience. The purpose of this article is to give an overview of what the first scientific papers were like and how they evolved to their present form and style. To facilitate this discussion, the scientific paper`s development has arbitrarily been divided into four stages: the origin and formative years of the scientific paper (1665-1765), emergence of scientific papers written for specialized publications (1765-1865), development of the modem scientific paper (1865-1965), and hyperspecialization and computerization of the modem scientific paper (1965-?).

  17. Evolution of the scientific paper

    Energy Technology Data Exchange (ETDEWEB)

    Harmon, J.E.

    1992-01-01

    The first papers reporting original research results in technical periodicals and proceedings appeared in the late 17th century. Since that time, the typical scientific paper has evolved from a fairly simple document, accessible to a general audience, to a much more complex one, aimed at a specialized audience. The purpose of this article is to give an overview of what the first scientific papers were like and how they evolved to their present form and style. To facilitate this discussion, the scientific paper's development has arbitrarily been divided into four stages: the origin and formative years of the scientific paper (1665-1765), emergence of scientific papers written for specialized publications (1765-1865), development of the modem scientific paper (1865-1965), and hyperspecialization and computerization of the modem scientific paper (1965- ).

  18. Scientific Journal Indexing

    Directory of Open Access Journals (Sweden)

    Getulio Teixeira Batista

    2007-08-01

    Full Text Available It is quite impressive the visibility of online publishing compared to offline. Lawrence (2001 computed the percentage increase across 1,494 venues containing at least five offline and five online articles. Results shown an average of 336% more citations to online articles compared to offline articles published in the same venue. If articles published in the same venue are of similar quality, then they concluded that online articles are more highly cited because of their easier access. Thomson Scientific, traditionally concerned with printed journals, announced on November 28, 2005, the launch of Web Citation Index™, the multidisciplinary citation index of scholarly content from institutional and subject-based repositories (http://scientific.thomson. com/press/2005/8298416/. The Web Citation Index from the abstracting and indexing (A&I connects together pre-print articles, institutional repositories and open access (OA journals (Chillingworth, 2005. Basically all research funds are government granted funds, tax payer’s supported and therefore, results should be made freely available to the community. Free online availability facilitates access to research findings, maximizes interaction among research groups, and optimizes efforts and research funds efficiency. Therefore, Ambi-Água is committed to provide free access to its articles. An important aspect of Ambi-Água is the publication and management system of this journal. It uses the Electronic System for Journal Publishing (SEER - http://www.ibict.br/secao.php?cat=SEER. This system was translated and customized by the Brazilian Institute for Science and Technology Information (IBICT based on the software developed by the Public Knowledge Project (Open Journal Systems of the British Columbia University (http://pkp.sfu.ca/ojs/. The big advantage of using this system is that it is compatible with the OAI-PMH protocol for metadata harvesting what greatly promotes published articles

  19. Atalante: scientific report 2008

    International Nuclear Information System (INIS)

    2008-01-01

    This report makes a synthesis of the research works carried out at CEA Marcoule in the domain of the back-end of the fuel cycle. The research programs involving the ATALANTE facility concern: the improvement of the spent fuel reprocessing of today's and tomorrow's reactors, the separation of minor actinides prior to their transmutation, and the long-term behaviour of ultimate radioactive wastes immobilized in suitable matrices for a reversible storage or a disposal in deep geologic repositories. The report presents the main scientific results obtained these last years in the domain of: 1 - basic chemistry of actinides and fission products, 2 - processing of spent fuels, 3 - actinides recycling experiments, 4 - long-term behaviour of conditioning matrices for materials and wastes, and 5 - measurements and analytical techniques used in the above mentioned studies. The ATALANTE facility is in the core of the future nuclear stakes which aim at optimizing the recycling of nuclear materials using innovative and proliferation-safe processes, and at minimizing the impact of radioactive wastes on the environment. (J.S.)

  20. Load Balancing Scientific Applications

    Energy Technology Data Exchange (ETDEWEB)

    Pearce, Olga Tkachyshyn [Texas A & M Univ., College Station, TX (United States)

    2014-12-01

    The largest supercomputers have millions of independent processors, and concurrency levels are rapidly increasing. For ideal efficiency, developers of the simulations that run on these machines must ensure that computational work is evenly balanced among processors. Assigning work evenly is challenging because many large modern parallel codes simulate behavior of physical systems that evolve over time, and their workloads change over time. Furthermore, the cost of imbalanced load increases with scale because most large-scale scientific simulations today use a Single Program Multiple Data (SPMD) parallel programming model, and an increasing number of processors will wait for the slowest one at the synchronization points. To address load imbalance, many large-scale parallel applications use dynamic load balance algorithms to redistribute work evenly. The research objective of this dissertation is to develop methods to decide when and how to load balance the application, and to balance it effectively and affordably. We measure and evaluate the computational load of the application, and develop strategies to decide when and how to correct the imbalance. Depending on the simulation, a fast, local load balance algorithm may be suitable, or a more sophisticated and expensive algorithm may be required. We developed a model for comparison of load balance algorithms for a specific state of the simulation that enables the selection of a balancing algorithm that will minimize overall runtime.

  1. Scientific report 1998

    International Nuclear Information System (INIS)

    Camarcat, N.

    1999-01-01

    This book contains technical and scientific papers on the main works of the Direction of the Fuel Cycle (DCC) in France. The study fields are: the upper fuel cycle studies with the SILVA (isotope separation by laser on atomic vapor) process (a model of gas centrifuge separative performance, an estimation of electron gun cathodes erosion, a power improvement of diode-pumped solid-state-lasers, measurement using intracavity near resonant propagation in atomic vapours); the down side fuel cycle studies (electronic structure of lanthanide or actinides complexes, forecasting of the stoichiometry of europium nitrate complexes, actinides complexes structural determination, experimental studies on separations, radioactive wastes processing and conditioning with the vitrification processes, radioactive wastes storage with concrete behaviour and biodegradation); studies on dismantling and cleansing (rheological behaviour of foams, remote decontamination of austenitic steel by ultra-violet laser); and technological analysis (high resolution wavelength meter, optimization methodology for diffractive and hybrid optic systems, reliability of fast switches in power electronics, study of cesium isolation, chemical optodes based on evanescent-wave absorption, study of viscous liquid ultrafiltration using supercritical CO 2 as a promoter). (A.L.B.)

  2. [Scientific journalism and epidemiological risk].

    Science.gov (United States)

    Luiz, Olinda do Carmo

    2007-01-01

    The importance of the communications media in the construction of symbols has been widely acknowledged. Many of the articles on health published in the daily newspapers mention medical studies, sourced from scientific publications focusing on new risks. The disclosure of risk studies in the mass media is also a topic for editorials and articles in scientific journals, focusing the problem of distortions and the appearance of contradictory news items. The purpose of this paper is to explore the meaning and content of disclosing scientific risk studies in large-circulation daily newspapers, analyzing news items published in Brazil and the scientific publications used as their sources during 2000. The "risk" is presented in the scientific research projects as a "black box" in the meaning of Latour, with the news items downplaying scientific disputes and underscoring associations between behavioral habits and the occurrence of diseases, emphasizing individual aspects of the epidemiological approach, to the detriment of the group.

  3. Implicit normativity in scientific advice

    DEFF Research Database (Denmark)

    Folker, Anna Paldam; Andersen, Hanne; Sandøe, Peter

    2008-01-01

    This paper focuses on implicit normative considerations underlying scientific advice-those normative questions, decisions, or issues that scientific advisers and the general public are not fully aware of but that nevertheless have implications for the character of the advice given. Using...... nutritional science as an example, we identify three such implicit normative issues. The first concerns the aim of scientific advice: whether it is about avoiding harm or promoting good. The second concerns the intended beneficiaries of the advice: whether advice should be framed to benefit the society...... as a whole or with special concern for the most vulnerable members of the population. The third consideration involves scientific advisers' attempts to balance the strengths of the scientific evidence with the expected consequences of scientific advice. We hope to promote more explicit discussion...

  4. Mastering scientific computing with R

    CERN Document Server

    Gerrard, Paul

    2015-01-01

    If you want to learn how to quantitatively answer scientific questions for practical purposes using the powerful R language and the open source R tool ecosystem, this book is ideal for you. It is ideally suited for scientists who understand scientific concepts, know a little R, and want to be able to start applying R to be able to answer empirical scientific questions. Some R exposure is helpful, but not compulsory.

  5. TAYLOR’S SCIENTIFIC MANAGEMENT

    OpenAIRE

    Dimitrios N. KOUMPAROULIS; Dionysios K. SOLOMOS

    2012-01-01

    Frederick Taylor is known as the father of modern management. Taylor’s scientific management revolutionized industry and helped shape the modern organization. Scientific management revolutionized industry because it explains how to increase production by working smarter, not harder. Taylor’s ideas were not limited to only serving the company’s bottom line but from the increase in productivity benefited the workforce as well. The principles of scientific management have become a machine of uni...

  6. Scientific Information Service at CERN

    CERN Document Server

    Pereira, Margarida

    2016-01-01

    Dissemination of information is an essential part of CERN's mission. It brings people together from all around the world and trains the scientists of tomorrow. CERN scientific output is documented and made available for the scientific community and the general public through the CERN Document Server, INSPIRE-HEP and Wikipedia. This report presents the work done in the Scientific Information Service during the summer student program.

  7. The GTC Scientific Data Centre

    Science.gov (United States)

    Solano, E.

    2005-12-01

    Since the early stages of the GTC project, the need of a scientific archive was already identified as an important tool for the scientific exploitation of the data. In this work, the conceptual design and the main functionalities of the Scientific Data Archive of the Gran Telescopio Canarias (GSA) are described. The system will be developed, implemented and maintained at the Laboratorio de Astrofísica Espacial y Física Fundamental (LAEFF).

  8. Eismitte in the Scientific Imagination

    DEFF Research Database (Denmark)

    Martin-Nielsen, Janet

    was a setting for scientific knowledge production as well as diplomatic maneuvering, providing new insights into the history of polar exploration and the intertwining of scientific and geopolitical considerations. Author Janet Martin-Nielsen draws on new research in private, government, military......Since the first attempts by Europeans to penetrate Greenland's interior, its geometric center, Eismitte (‘middle ice’), has been one of the most forbidding but scientifically rich locations in the Arctic. Tracing its history from European contact through the Cold War, this study shows how Eismitte......, and institutional archives in many languages in multiple countries to illuminate Eismitte’s place in the scientific imagination....

  9. The craft of scientific writing

    CERN Document Server

    Alley, Michael

    2019-01-01

    The Craft of Scientific Writing uses scores of examples to show the differences between scientific writing that informs and persuades and scientific writing that does not. Focusing on technical papers, dissertations, and reports, this text shows engineers, scientists, and technical professionals the five keys of style that distinguish the best scientific documents: (1) having the details presented in a methodical fashion, (2) having the important details emphasized, (3) having ideas cast into clear and precise sentences, (4) having clear connections between those ideas, and (5) having illustrations that persuade.

  10. Ethical principles of scientific communication

    Directory of Open Access Journals (Sweden)

    Baranov G. V.

    2017-03-01

    Full Text Available the article presents the principles of ethical management of scientific communication. The author approves the priority of ethical principle of social responsibility of the scientist.

  11. Scientific Jargon, Good and Bad

    Science.gov (United States)

    Hirst, Russel

    2003-01-01

    Scientific and technical jargon--specialized vocabulary, usually Latinate--plays a vital role in scientific and technical communication. But its proper use continues to be a point of discussion because of our concern with audience adaptation, rhetorical exigence, rhetorical purpose, and ethics. We've focused on teaching students--and on convincing…

  12. In Search of Scientific Inspiration.

    Science.gov (United States)

    2017-01-12

    In the ever-expanding sea of scientific advances, how do you find inspiration for your own study? Cell editor Jiaying Tan talked with Mark Lemmon and Joseph (Yossi) Schlessinger about the importance of fueling your research creativity with the conceptual excitement and technical advance from the broad scientific field. An excerpt of the conversation appears below. Copyright © 2017. Published by Elsevier Inc.

  13. International Scientific and Technical Organisations

    International Nuclear Information System (INIS)

    Nunez-Lagos Rogla, R.

    2003-01-01

    The nuclear scientific and technical world is well aware of the EURATOM and IAEA activities but usually other international scientific and technical organisations relevant for their ordinary work are unknown. In this article three international organisations are described briefly, the International Union of Pure and Applied Physics (IUPAP). International Union of Pure and Applied chemistry (IUPAC) and the international council of Science (ICSU). (Author)

  14. Scientific Research: Commodities or Commons?

    Science.gov (United States)

    Vermeir, Koen

    2013-01-01

    Truth is for sale today, some critics claim. The increased commodification of science corrupts it, scientific fraud is rampant and the age-old trust in science is shattered. This cynical view, although gaining in prominence, does not explain very well the surprising motivation and integrity that is still central to the scientific life. Although…

  15. Scientific Research: How Many Paradigms?

    Science.gov (United States)

    Strawn, George O.

    2012-01-01

    As Yogi Berra said, "Predictions are hard, especially about the future." In this article, the author offers a few forward-looking observations about the emerging impact of information technology on scientific research. Scientific research refers to a particular method for acquiring knowledge about natural phenomena. This method has two dimensions:…

  16. Scientific Progress in Strategic Management

    DEFF Research Database (Denmark)

    Foss, Nicolai Juul

    Does the RBV represent a case of scientific progress? And has it emerged as the dominant approach to the analysis of competitive advantage for this reason? Conventional criteria for scientific progress, notably those of the growth of knowledge literature, are not particularly helpful for understa...

  17. Scientific Representation and Science Learning

    Science.gov (United States)

    Matta, Corrado

    2014-01-01

    In this article I examine three examples of philosophical theories of scientific representation with the aim of assessing which of these is a good candidate for a philosophical theory of scientific representation in science learning. The three candidate theories are Giere's intentional approach, Suárez's inferential approach and Lynch and…

  18. Scientific legacy of Stanley Ruby

    International Nuclear Information System (INIS)

    Shenoy, G. K.

    2006-01-01

    Stanley L. Ruby (1924-2004) made major contributions to Moessbauer spectroscopy and was the first to suggest the feasibility of observing the Moessbauer effect using synchrotron radiation. In this article we recall his scientific legacy that have inspired his scientific colleagues.

  19. Scientific evaluation at the CEA

    International Nuclear Information System (INIS)

    1999-01-01

    This report presents a statement of the scientific and technical activity of the French atomic energy commission (CEA) for the year 1998. This evaluation is made by external and independent experts and requires some specific dispositions for the nuclear protection and safety institute (IPSN) and for the direction of military applications (DAM). The report is divided into 5 parts dealing successively with: part 1 - the CEA, a public research organization (civil nuclear research, technology research and transfers, defence activities); the scientific and technical evaluation at the CEA (general framework, evaluation of the IPSN and DAM); part 2 - the scientific and technical councils (directions of fuel cycle, of nuclear reactors, and of advanced technologies); part 3 - the scientific councils (directions of matter and of life sciences); the nuclear protection and safety institute; the direction of military applications; part 4 - the corresponding members of the evaluation; part 5 - the list of scientific and technical councils and members. (J.S.)

  20. PSI scientific report 2010

    International Nuclear Information System (INIS)

    2011-04-01

    at. The substantial enhancement of the therapeutic efficacy of antibodies is reported on, as is the production of terbium radioisotopes for diagnostic and therapeutic applications in nuclear medicine. Non-homogeneous distribution of radionuclides in proton-irradiated liquid-metal targets is the topic covered in a further report and the precise simulation of high-intensity cyclotrons is reported on. The expanding horizons for proton therapy are examined. The report also reviews the Strategy and highlights of general energy research and deals with a Niobia-Ceria based multi-purpose catalyst for diesel exhaust gas after-treatment. High-flux solar-driven thermochemical dissociation of CO 2 and H 2 O using ceria redox reactions and the characterisation of combustion processes by laser spectroscopic measuring techniques are further topics covered. Results of the first projects completed by the Competence Center Energy and Mobility CCEM are discussed, scientific findings on nuclear safety and the safety analysis of the EPR nuclear reactor are discussed, as is the improved retention of radioactive aerosols during a steam-generator tube rupture. Predictive sorption modelling of various substances in Bentonite and opalinus clay and a safety analysis of nuclear power plant systems and their operators are reported on. The characterisation of plutonium in mixed-oxide nuclear fuel by synchrotron radiation is reported on. The impact of the Eyjafjallajoekull volcano eruption on air quality and the detection of recent climatic changes in the Russian Altai are further atmospheric topics dealt with. Finally, the heuristic design for the technical characterisation of passenger vehicles is looked at. The report also lists the facilities available to external users and their use in 2010. Technology transfer is discussed and a statistical overview of the PSI in 2010 is presented. The comprehensive report is finalised with contact information and an extensive overview of publications made

  1. Scientific Publication Ethics

    Directory of Open Access Journals (Sweden)

    Osman İnci

    2015-06-01

    Full Text Available Science based on consciousness of responsibility and principles of trust puts academics under an obligation to act according to the values and principles, ethical attitudes and standards of behaviour. A quest for perfectness, to observe truth and show respect for the dignity and value of each individual should be a fundamental principle. In this context, academic freedom and autonomy, academic integrity,  responsibility and accountabily, respect for others, the protection of the fundamental rights and competence are among the core values of academic merit. Science is not possible without ethics. Protection of academic value is essential for an academic publication. It is also fundamental that academics should not behave contrary to the ethics values. It is assumed that academic studies are conducted honestly, based on true foundations, that the research data are collected according to the correct methods, accurate statistics are used and results are reported accordingly. It is also assumed that professional standards are carried out in software presentation and share of results. The exceptional methods in academical publications should be classified as those carried out intentionally, aiming to mislead the related studies and the others to be distinguished from the ones carried out by some ignorances and various innocent facts. The most serious infraction of the ethical rules and standards is the ‘academic misappropriation’. Among all, the most crucial one is the academic plagiarism, which is transferring the production of some other person under one’s own name or stealing away the work of other persons. Creating some not-existing data and results, and fabrication is inventing some information just by sitting at the table. Changing the datas and results without scientific reasoning, and falsification is accepted as another and the third kind of misappropriation (FTP. Their most important difference from the other kinds is

  2. The cryogenic photon detection system for the ALPS II experiment. Characterization, optimization and background rejection

    International Nuclear Information System (INIS)

    Bastidon, Noemi Alice Chloe

    2017-01-01

    The search for new fundamental bosons at very low mass is the central objective of the ALPS II experiment which is currently set up at the Deutsches Elektronen-Synchrotron (DESY, Hamburg). This experiment follows the light-shining-through-the-wall concept where photons could oscillate into weakly interacting light bosons in front of a wall and back into photons behind the wall, giving the impression that light can shine through a light tight barrier. In this concept, the background-free detection of near-infrared photons is required to fully exploit the sensitivity of the apparatus. The high efficiency single-photon detection in the near-infrared is challenging and requires a cryogenic detector. In this project, a Transition-Edge Sensor (TES) operated below 100mK will be used to detect single photons. This thesis focuses on the characterization and optimization of the ALPS II detector system including an Adiabatic Demagnetisation Refrigerator (ADR) with its two-stage pulse-tube cooler, two TES detectors and their Superconducting Quantum Interference Devices (SQUIDs) read-out system. Stability of the detection system over time is a priority in the ALPS II experiment. It is in this context that the cooling system has been subjected to many upgrades. In the framework of this thesis, the cooling setup has been studied in detail in order to optimize its cooling performances. Furthermore, the stability of the detector has been studied according to various criteria. Other essential parameters of the ALPS II experiment are its detection efficiency and its background rate. Indeed, the sensitivity of the experiment directly depends on these two characteristics. Both elements have been studied in depth in order to define if the chosen TES detector will meet ALPS IIc specifications.

  3. Prototype Control System for Compensation of Superconducting Cavities Detuning Using Piezoelectric Actuators

    Science.gov (United States)

    Przygoda, K.; Piotrowski, A.; Jablonski, G.; Makowski, D.; Pozniak, T.; Napieralski, A.

    2009-08-01

    Pulsed operation of high gradient superconducting radio frequency (SCRF) cavities results in dynamic Lorentz force detuning (LFD) approaching or exceeding the bandwidth of the cavity of order of a few hundreds of Hz. The resulting modulation of the resonance frequency of the cavity is leading to a perturbation of the amplitude and phase of the accelerating field, which can be controlled only at the expense of RF power. Presently, at various labs, a piezoelectric fast tuner based on an active compensation scheme for the resonance frequency control of the cavity is under study. The tests already performed in the Free Electron Laser in Hamburg (FLASH), proved the possibility of Lorentz force detuning compensation by the means of the piezo element excited with the single period of sine wave prior to the RF pulse. The X-Ray Free Electron Laser (X-FEL) accelerator, which is now under development in Deutsche Elektronen-Synchrotron (DESY), will consists of around 800 cavities with a fast tuner fixture including the actuator/sensor configuration. Therefore, it is necessary to design a distributed control system which would be able to supervise around 25 RF stations, each one comprised of 32 cavities. The Advanced Telecomunications Computing Architecture (ATCA) was chosen to design, develop, and build a Low Level Radio Frequency (LLRF) controller for X-FEL. The prototype control system for Lorentz force detuning compensation was designed and developed. The control applications applied in the system were fitted to the main framework of interfaces and communication protocols proposed for the ATCA-based LLRF control system. The paper presents the general view of a designed control system and shows the first experimental results from the tests carried out in FLASH facility. Moreover, the possibilities for integration of the piezo control system to the ATCA standards are discussed.

  4. Quantitative X-ray microtomography with synchrotron radiation

    Energy Technology Data Exchange (ETDEWEB)

    Donath, T. [GKSS-Forschungszentrum Geesthacht GmbH (Germany). Inst. fuer Materialforschung

    2007-07-01

    Synchrotron-radiation-based computed microtomography (SR{sub {mu}}CT) is an established method for the examination of volume structures. It allows to measure the x-ray attenuation coefficient of a specimen three-dimensionally with a spatial resolution of about one micrometer. In contrast to conventional x-ray sources (x-ray tubes), the unique properties of synchrotron radiation enable quantitative measurements that do not suffer from beam-hardening artifacts. During this work the capabilities for quantitative SR{sub {mu}}CT measurements have been further improved by enhancements that were made to the SR{sub {mu}}CT apparatus and to the reconstruction chain. For high-resolution SR{sub {mu}}CT an x-ray camera consisting of luminescent screen (x-ray phosphor), lens system, and CCD camera was used. A significant suppression of blur that is caused by reflections inside the luminescent screen could be achieved by application of an absorbing optical coating to the screen surface. It is shown that blur and ring artifacts in the tomographic reconstructions are thereby drastically reduced. Furthermore, a robust and objective method for the determination of the center of rotation in projection data (sinograms) is presented that achieves sub-pixel precision. By implementation of this method into the reconstruction chain, complete automation of the reconstruction process has been achieved. Examples of quantitative SR{sub {mu}}CT studies conducted at the Hamburger Synchrotronstrahlungslabor HASYLAB at the Deutsches Elektronen-Synchrotron DESY are presented and used for the demonstration of the achieved enhancements. (orig.)

  5. The cryogenic photon detection system for the ALPS II experiment. Characterization, optimization and background rejection

    Energy Technology Data Exchange (ETDEWEB)

    Bastidon, Noemi Alice Chloe

    2017-01-12

    The search for new fundamental bosons at very low mass is the central objective of the ALPS II experiment which is currently set up at the Deutsches Elektronen-Synchrotron (DESY, Hamburg). This experiment follows the light-shining-through-the-wall concept where photons could oscillate into weakly interacting light bosons in front of a wall and back into photons behind the wall, giving the impression that light can shine through a light tight barrier. In this concept, the background-free detection of near-infrared photons is required to fully exploit the sensitivity of the apparatus. The high efficiency single-photon detection in the near-infrared is challenging and requires a cryogenic detector. In this project, a Transition-Edge Sensor (TES) operated below 100mK will be used to detect single photons. This thesis focuses on the characterization and optimization of the ALPS II detector system including an Adiabatic Demagnetisation Refrigerator (ADR) with its two-stage pulse-tube cooler, two TES detectors and their Superconducting Quantum Interference Devices (SQUIDs) read-out system. Stability of the detection system over time is a priority in the ALPS II experiment. It is in this context that the cooling system has been subjected to many upgrades. In the framework of this thesis, the cooling setup has been studied in detail in order to optimize its cooling performances. Furthermore, the stability of the detector has been studied according to various criteria. Other essential parameters of the ALPS II experiment are its detection efficiency and its background rate. Indeed, the sensitivity of the experiment directly depends on these two characteristics. Both elements have been studied in depth in order to define if the chosen TES detector will meet ALPS IIc specifications.

  6. Generation and transport of double-bunch electron beams in the FLASH beamline

    International Nuclear Information System (INIS)

    Entrena Utrilla, Carlos Manuel

    2014-10-01

    The Free Electron Laser in Hamburg (FLASH) is part of the Deutsches Elektronen-Synchrotron (DESY) research center. Its linear accelerator produces high-quality electron bunches of up to about 1.2 GeV that are used in its undulator to generate short, intense, high-brilliance soft-X ray pulses with a wavelength from 4.2 nm to 45 nm with the SASE process. This characteristics make FLASH a leading facility worldwide in photon science and linear accelerator technologies, along with the Linac Coherent Light Source (in SLAC, Standford, USA), the FERMI rate at Elettra in Trieste (Italy) and SACLA (Japan). For several reasons, there is a substantial interest to accelerate two electron bunches with a final temporal distance of several hundreds of femtoseconds. These two bunches are generated on the photocathode within picoseconds from each other and accelerated within the same RF bucket (the same period of the RF (radio-frequency) accelerating fields). These experiments are of interest for two-color FEL for pump-probe experiments, and for the external injection of electrons in the future particle-driven plasma wakefield accelerator experiment, called FLASHForward, which will start in early 2016. This work analyzes the longitudinal dynamics of said double-bunches, from generation on the photocathode to the transport and compression through the linac. It is shown how a working point for a desired compression scenario (shape and final current of the bunches, and final distance between them) can be found with different numerical tracking procedures, and how the electrons can be experimentally generated and transported through the accelerator in the current layout, which was confirmed in a proof-of-concept experiment in late May 2014.

  7. ERINDA Scientific Results: Transnational Access Activities and Scientific Visits

    CERN Document Server

    Hambsch, Franz-Josef

    2014-01-01

    This paper gives an overview of the Transnational Access Activities and Scientific visits within the FP7 project ERINDA (European Research Infrastructures for Nuclear Data). It highlights the fact that nearly 3200 data - taking hours for external users were made available in the partner installations and 104 man weeks for scientific visits to par tner institutes. This is much more than the 2500 beam hours and 80 weeks promised in the Description of Work of the project.

  8. Accelerating the scientific exploration process with scientific workflows

    International Nuclear Information System (INIS)

    Altintas, Ilkay; Barney, Oscar; Cheng, Zhengang; Critchlow, Terence; Ludaescher, Bertram; Parker, Steve; Shoshani, Arie; Vouk, Mladen

    2006-01-01

    Although an increasing amount of middleware has emerged in the last few years to achieve remote data access, distributed job execution, and data management, orchestrating these technologies with minimal overhead still remains a difficult task for scientists. Scientific workflow systems improve this situation by creating interfaces to a variety of technologies and automating the execution and monitoring of the workflows. Workflow systems provide domain-independent customizable interfaces and tools that combine different tools and technologies along with efficient methods for using them. As simulations and experiments move into the petascale regime, the orchestration of long running data and compute intensive tasks is becoming a major requirement for the successful steering and completion of scientific investigations. A scientific workflow is the process of combining data and processes into a configurable, structured set of steps that implement semi-automated computational solutions of a scientific problem. Kepler is a cross-project collaboration, co-founded by the SciDAC Scientific Data Management (SDM) Center, whose purpose is to develop a domain-independent scientific workflow system. It provides a workflow environment in which scientists design and execute scientific workflows by specifying the desired sequence of computational actions and the appropriate data flow, including required data transformations, between these steps. Currently deployed workflows range from local analytical pipelines to distributed, high-performance and high-throughput applications, which can be both data- and compute-intensive. The scientific workflow approach offers a number of advantages over traditional scripting-based approaches, including ease of configuration, improved reusability and maintenance of workflows and components (called actors), automated provenance management, 'smart' re-running of different versions of workflow instances, on-the-fly updateable parameters, monitoring

  9. Scientific Revolutions and Political Attitudes

    Czech Academy of Sciences Publication Activity Database

    Mervart, Jan

    2014-01-01

    Roč. 2, č. 2 (2014), s. 185-190 ISSN 2336-3142 Institutional support: RVO:67985955 Keywords : Scientific revolution * party historiography * Czechoslovakia * communist reformism Subject RIV: AB - History

  10. Taylor’s Scientific Management

    Directory of Open Access Journals (Sweden)

    Dimitrios Koumparoulis

    2012-08-01

    Full Text Available Frederick Taylor is known as the father of modern management. Taylor’s scientific management revolutionized industry and helped shape modern organization. Scientific management revolutionized industry because it explains how to increase production by working smarter, not harder. Taylor’s ideas were not limited to only serving the company’s bottom line but the increase in productivity benefited the workforce as well. The principles of scientific management became a machine of universal efficiency since there was a widespread use of scientific management worldwide and beyond the scope of the workplace. Taylor’s theories on using science and statistical fact have become a guideline that many have followed to great success.

  11. Scientific papers for health informatics.

    Science.gov (United States)

    Pereira, Samáris Ramiro; Duarte, Jacy Marcondes; Bandiera-Paiva, Paulo

    2013-01-01

    From the hypothesis that the development of scientific papers, mainly in interdisciplinary areas such as Health Informatics, may bring difficulties to the author, as had its communicative efficacy decreased or compromising their approval for publication; we aim to make considerations on the main items to good players making this kind of text. The scientific writing has peculiarities that must be taken into consideration when it writes: general characteristics, such as simplicity and objectivity, and characteristics of each area of knowledge, such as terminology, formatting and standardization. The research methodology adopted is bibliographical. The information was based on literature review and the authors' experience, teachers and assessors of scientific methodology in peer review publications in the area. As a result, we designed a checklist of items to be checked before submission of a paper to a scientific publication vehicle in order to contribute to the promotion of research, facilitating the publication and increase its capacity in this important area of knowledge.

  12. EPA scientific integrity policy draft

    Science.gov (United States)

    Showstack, Randy

    2011-08-01

    The U.S. Environmental Protection Agency (EPA) issued its draft scientific integrity policy on 5 August. The draft policy addresses scientific ethical standards, communications with the public, the use of advisory committees and peer review, and professional development. The draft policy was developed by an ad hoc group of EPA senior staff and scientists in response to a December 2010 memorandum on scientific integrity from the White House Office of Science and Technology Policy. The agency is accepting public comments on the draft through 6 September; comments should be sent to osa.staff@epa.gov. For more information, see http://www.epa.gov/stpc/pdfs/draft-scientific-integrity-policy-aug2011.pdf.

  13. Scientific Services on the Cloud

    Science.gov (United States)

    Chapman, David; Joshi, Karuna P.; Yesha, Yelena; Halem, Milt; Yesha, Yaacov; Nguyen, Phuong

    Scientific Computing was one of the first every applications for parallel and distributed computation. To this date, scientific applications remain some of the most compute intensive, and have inspired creation of petaflop compute infrastructure such as the Oak Ridge Jaguar and Los Alamos RoadRunner. Large dedicated hardware infrastructure has become both a blessing and a curse to the scientific community. Scientists are interested in cloud computing for much the same reason as businesses and other professionals. The hardware is provided, maintained, and administrated by a third party. Software abstraction and virtualization provide reliability, and fault tolerance. Graduated fees allow for multi-scale prototyping and execution. Cloud computing resources are only a few clicks away, and by far the easiest high performance distributed platform to gain access to. There may still be dedicated infrastructure for ultra-scale science, but the cloud can easily play a major part of the scientific computing initiative.

  14. Till Moritz Karbach, Scientific Legacy

    CERN Document Server

    Aaij, Roel; Adinolfi, Marco; Affolder, Anthony; Ajaltouni, Ziad; Akar, Simon; Albrecht, Johannes; Alessio, Federico; Alexander, Michael; Ali, Suvayu; Alkhazov, Georgy; Alvarez Cartelle, Paula; Alves Jr, Antonio Augusto; Amato, Sandra; Amerio, Silvia; Amhis, Yasmine; An, Liupan; Anderlini, Lucio; Anderson, Jonathan; Andreassi, Guido; Andreotti, Mirco; Andrews, Jason; Appleby, Robert; Aquines Gutierrez, Osvaldo; Archilli, Flavio; d'Argent, Philippe; Artamonov, Alexander; Artuso, Marina; Aslanides, Elie; Auriemma, Giulio; Baalouch, Marouen; Bachmann, Sebastian; Back, John; Badalov, Alexey; Baesso, Clarissa; Baldini, Wander; Barlow, Roger; Barschel, Colin; Barsuk, Sergey; Barter, William; Batozskaya, Varvara; Battista, Vincenzo; Bay, Aurelio; Beaucourt, Leo; Beddow, John; Bedeschi, Franco; Bediaga, Ignacio; Bel, Lennaert; Bellee, Violaine; Belyaev, Ivan; Ben-Haim, Eli; Bencivenni, Giovanni; Benson, Sean; Benton, Jack; Berezhnoy, Alexander; Bernet, Roland; Bertolin, Alessandro; Bettler, Marc-Olivier; van Beuzekom, Martinus; Bien, Alexander; Bifani, Simone; Bird, Thomas; Birnkraut, Alex; Bizzeti, Andrea; Blake, Thomas; Blanc, Frédéric; Blouw, Johan; Blusk, Steven; Bocci, Valerio; Bondar, Alexander; Bondar, Nikolay; Bonivento, Walter; Borghi, Silvia; Borsato, Martino; Bowcock, Themistocles; Bowen, Espen Eie; Bozzi, Concezio; Braun, Svende; Brett, David; Britsch, Markward; Britton, Thomas; Brodzicka, Jolanta; Brook, Nicholas; Bursche, Albert; Buytaert, Jan; Cadeddu, Sandro; Calabrese, Roberto; Calvi, Marta; Calvo Gomez, Miriam; Campana, Pierluigi; Campora Perez, Daniel; Capriotti, Lorenzo; Carbone, Angelo; Carboni, Giovanni; Cardinale, Roberta; Cardini, Alessandro; Carniti, Paolo; Carson, Laurence; Carvalho Akiba, Kazuyoshi; Casse, Gianluigi; Cassina, Lorenzo; Castillo Garcia, Lucia; Cattaneo, Marco; Cauet, Christophe; Cavallero, Giovanni; Cenci, Riccardo; Charles, Matthew; Charpentier, Philippe; Chefdeville, Maximilien; Chen, Shanzhen; Cheung, Shu-Faye; Chiapolini, Nicola; Chrzaszcz, Marcin; Cid Vidal, Xabier; Ciezarek, Gregory; Clarke, Peter; Clemencic, Marco; Cliff, Harry; Closier, Joel; Coco, Victor; Cogan, Julien; Cogneras, Eric; Cogoni, Violetta; Cojocariu, Lucian; Collazuol, Gianmaria; Collins, Paula; Comerma-Montells, Albert; Contu, Andrea; Cook, Andrew; Coombes, Matthew; Coquereau, Samuel; Corti, Gloria; Corvo, Marco; Couturier, Benjamin; Cowan, Greig; Craik, Daniel Charles; Crocombe, Andrew; Cruz Torres, Melissa Maria; Cunliffe, Samuel; Currie, Robert; D'Ambrosio, Carmelo; Dalseno, Jeremy; David, Pieter; Davis, Adam; De Bruyn, Kristof; De Capua, Stefano; De Cian, Michel; De Miranda, Jussara; De Paula, Leandro; De Silva, Weeraddana; De Simone, Patrizia; Dean, Cameron Thomas; Decamp, Daniel; Deckenhoff, Mirko; Del Buono, Luigi; Déléage, Nicolas; Demmer, Moritz; Derkach, Denis; Deschamps, Olivier; Dettori, Francesco; Dey, Biplab; Di Canto, Angelo; Di Ruscio, Francesco; Dijkstra, Hans; Donleavy, Stephanie; Dordei, Francesca; Dorigo, Mirco; Dosil Suárez, Alvaro; Dossett, David; Dovbnya, Anatoliy; Dreimanis, Karlis; Dufour, Laurent; Dujany, Giulio; Dupertuis, Frederic; Durante, Paolo; Dzhelyadin, Rustem; Dziurda, Agnieszka; Dzyuba, Alexey; Easo, Sajan; Egede, Ulrik; Egorychev, Victor; Eidelman, Semen; Eisenhardt, Stephan; Eitschberger, Ulrich; Ekelhof, Robert; Eklund, Lars; El Rifai, Ibrahim; Elsasser, Christian; Ely, Scott; Esen, Sevda; Evans, Hannah Mary; Evans, Timothy; Falabella, Antonio; Färber, Christian; Farinelli, Chiara; Farley, Nathanael; Farry, Stephen; Fay, Robert; Ferguson, Dianne; Fernandez Albor, Victor; Ferrari, Fabio; Ferreira Rodrigues, Fernando; Ferro-Luzzi, Massimiliano; Filippov, Sergey; Fiore, Marco; Fiorini, Massimiliano; Firlej, Miroslaw; Fitzpatrick, Conor; Fiutowski, Tomasz; Fohl, Klaus; Fol, Philip; Fontana, Marianna; Fontanelli, Flavio; Forty, Roger; Francisco, Oscar; Frank, Markus; Frei, Christoph; Frosini, Maddalena; Fu, Jinlin; Furfaro, Emiliano; Gallas Torreira, Abraham; Galli, Domenico; Gallorini, Stefano; Gambetta, Silvia; Gandelman, Miriam; Gandini, Paolo; Gao, Yuanning; García Pardiñas, Julián; Garra Tico, Jordi; Garrido, Lluis; Gascon, David; Gaspar, Clara; Gastaldi, Ugo; Gauld, Rhorry; Gavardi, Laura; Gazzoni, Giulio; Geraci, Angelo; Gerick, David; Gersabeck, Evelina; Gersabeck, Marco; Gershon, Timothy; Ghez, Philippe; Gianelle, Alessio; Gianì, Sebastiana; Gibson, Valerie; Girard, Olivier Göran; Giubega, Lavinia-Helena; Gligorov, Vladimir; Göbel, Carla; Golubkov, Dmitry; Golutvin, Andrey; Gomes, Alvaro; Gotti, Claudio; Grabalosa Gándara, Marc; Graciani Diaz, Ricardo; Granado Cardoso, Luis Alberto; Graugés, Eugeni; Graverini, Elena; Graziani, Giacomo; Grecu, Alexandru; Greening, Edward; Gregson, Sam; Griffith, Peter; Grillo, Lucia; Grünberg, Oliver; Gui, Bin; Gushchin, Evgeny; Guz, Yury; Gys, Thierry; Hadavizadeh, Thomas; Hadjivasiliou, Christos; Haefeli, Guido; Haen, Christophe; Haines, Susan; Hall, Samuel; Hamilton, Brian; Han, Xiaoxue; Hansmann-Menzemer, Stephanie; Harnew, Neville; Harnew, Samuel; Harrison, Jonathan; He, Jibo; Head, Timothy; Heijne, Veerle; Hennessy, Karol; Henrard, Pierre; Henry, Louis; Hernando Morata, Jose Angel; van Herwijnen, Eric; Heß, Miriam; Hicheur, Adlène; Hill, Donal; Hoballah, Mostafa; Hombach, Christoph; Hulsbergen, Wouter; Humair, Thibaud; Hussain, Nazim; Hutchcroft, David; Hynds, Daniel; Idzik, Marek; Ilten, Philip; Jacobsson, Richard; Jaeger, Andreas; Jalocha, Pawel; Jans, Eddy; Jawahery, Abolhassan; Jing, Fanfan; John, Malcolm; Johnson, Daniel; Jones, Christopher; Joram, Christian; Jost, Beat; Jurik, Nathan; Kandybei, Sergii; Kanso, Walaa; Karacson, Matthias; Karodia, Sarah; Kelsey, Matthew; Kenyon, Ian; Kenzie, Matthew; Ketel, Tjeerd; Khanji, Basem; Khurewathanakul, Chitsanu; Klaver, Suzanne; Klimaszewski, Konrad; Kochebina, Olga; Kolpin, Michael; Komarov, Ilya; Koopman, Rose; Koppenburg, Patrick; Korolev, Mikhail; Kozeiha, Mohamad; Kravchuk, Leonid; Kreplin, Katharina; Kreps, Michal; Krocker, Georg; Krokovny, Pavel; Kruse, Florian; Kucewicz, Wojciech; Kucharczyk, Marcin; Kudryavtsev, Vasily; Kuonen, Axel Kevin; Kurek, Krzysztof; Kvaratskheliya, Tengiz; Lacarrere, Daniel; Lafferty, George; Lai, Adriano; Lambert, Dean; Lambert, Robert W; Lanfranchi, Gaia; Langenbruch, Christoph; Langhans, Benedikt; Latham, Thomas; Lazzeroni, Cristina; Le Gac, Renaud; van Leerdam, Jeroen; Lees, Jean-Pierre; Lefèvre, Regis; Leflat, Alexander; Lefrançois, Jacques; Leroy, Olivier; Lesiak, Tadeusz; Leverington, Blake; Li, Yiming; Likhomanenko, Tatiana; Liles, Myfanwy; Lindner, Rolf; Linn, Christian; Lionetto, Federica; Liu, Bo; Liu, Xuesong; Loh, David; Lohn, Stefan; Longstaff, Iain; Lopes, Jose; Lowdon, Peter; Lucchesi, Donatella; Luo, Haofei; Lupato, Anna; Luppi, Eleonora; Lupton, Oliver; Machefert, Frederic; Maciuc, Florin; Maev, Oleg; Maguire, Kevin; Malde, Sneha; Malinin, Alexander; Manca, Giulia; Mancinelli, Giampiero; Manning, Peter Michael; Mapelli, Alessandro; Maratas, Jan; Marchand, Jean François; Marconi, Umberto; Marin Benito, Carla; Marino, Pietro; Märki, Raphael; Marks, Jörg; Martellotti, Giuseppe; Martin, Morgan; Martinelli, Maurizio; Martinez Santos, Diego; Martinez Vidal, Fernando; Martins Tostes, Danielle; Massafferri, André; Matev, Rosen; Mathad, Abhijit; Mathe, Zoltan; Matteuzzi, Clara; Mauri, Andrea; Maurin, Brice; Mazurov, Alexander; McCann, Michael; McCarthy, James; McNab, Andrew; McNulty, Ronan; Meadows, Brian; Meier, Frank; Meissner, Marco; Melnychuk, Dmytro; Merk, Marcel; Milanes, Diego Alejandro; Minard, Marie-Noelle; Mitzel, Dominik Stefan; Molina Rodriguez, Josue; Monteil, Stephane; Morandin, Mauro; Morawski, Piotr; Mordà, Alessandro; Morello, Michael Joseph; Moron, Jakub; Morris, Adam Benjamin; Mountain, Raymond; Muheim, Franz; Müller, Janine; Müller, Katharina; Müller, Vanessa; Mussini, Manuel; Muster, Bastien; Naik, Paras; Nakada, Tatsuya; Nandakumar, Raja; Nandi, Anita; Nasteva, Irina; Needham, Matthew; Neri, Nicola; Neubert, Sebastian; Neufeld, Niko; Neuner, Max; Nguyen, Anh Duc; Nguyen, Thi-Dung; Nguyen-Mau, Chung; Niess, Valentin; Niet, Ramon; Nikitin, Nikolay; Nikodem, Thomas; Ninci, Daniele; Novoselov, Alexey; O'Hanlon, Daniel Patrick; Oblakowska-Mucha, Agnieszka; Obraztsov, Vladimir; Ogilvy, Stephen; Okhrimenko, Oleksandr; Oldeman, Rudolf; Onderwater, Gerco; Osorio Rodrigues, Bruno; Otalora Goicochea, Juan Martin; Otto, Adam; Owen, Patrick; Oyanguren, Maria Aranzazu; Palano, Antimo; Palombo, Fernando; Palutan, Matteo; Panman, Jacob; Papanestis, Antonios; Pappagallo, Marco; Pappalardo, Luciano; Pappenheimer, Cheryl; Parkes, Christopher; Passaleva, Giovanni; Patel, Girish; Patel, Mitesh; Patrignani, Claudia; Pearce, Alex; Pellegrino, Antonio; Penso, Gianni; Pepe Altarelli, Monica; Perazzini, Stefano; Perret, Pascal; Pescatore, Luca; Petridis, Konstantinos; Petrolini, Alessandro; Petruzzo, Marco; Picatoste Olloqui, Eduardo; Pietrzyk, Boleslaw; Pilař, Tomas; Pinci, Davide; Pistone, Alessandro; Piucci, Alessio; Playfer, Stephen; Plo Casasus, Maximo; Poikela, Tuomas; Polci, Francesco; Poluektov, Anton; Polyakov, Ivan; Polycarpo, Erica; Popov, Alexander; Popov, Dmitry; Popovici, Bogdan; Potterat, Cédric; Price, Eugenia; Price, Joseph David; Prisciandaro, Jessica; Pritchard, Adrian; Prouve, Claire; Pugatch, Valery; Puig Navarro, Albert; Punzi, Giovanni; Qian, Wenbin; Quagliani, Renato; Rachwal, Bartolomiej; Rademacker, Jonas; Rama, Matteo; Rangel, Murilo; Raniuk, Iurii; Rauschmayr, Nathalie; Raven, Gerhard; Redi, Federico; Reichert, Stefanie; Reid, Matthew; dos Reis, Alberto; Ricciardi, Stefania; Richards, Sophie; Rihl, Mariana; Rinnert, Kurt; Rives Molina, Vincente; Robbe, Patrick; Rodrigues, Ana Barbara; Rodrigues, Eduardo; Rodriguez Lopez, Jairo Alexis; Rodriguez Perez, Pablo; Roiser, Stefan; Romanovsky, Vladimir; Romero Vidal, Antonio; Ronayne, John William; Rotondo, Marcello; Rouvinet, Julien; Ruf, Thomas; Ruiz, Hugo; Ruiz Valls, Pablo; Saborido Silva, Juan Jose; Sagidova, Naylya; Sail, Paul; Saitta, Biagio; Salustino Guimaraes, Valdir; Sanchez Mayordomo, Carlos; Sanmartin Sedes, Brais; Santacesaria, Roberta; Santamarina Rios, Cibran; Santimaria, Marco; Santovetti, Emanuele; Sarti, Alessio; Satriano, Celestina; Satta, Alessia; Saunders, Daniel Martin; Savrina, Darya; Schiller, Manuel; Schindler, Heinrich; Schlupp, Maximilian; Schmelling, Michael; Schmelzer, Timon; Schmidt, Burkhard; Schneider, Olivier; Schopper, Andreas; Schubiger, Maxime; Schune, Marie Helene; Schwemmer, Rainer; Sciascia, Barbara; Sciubba, Adalberto; Semennikov, Alexander; Serra, Nicola; Serrano, Justine; Sestini, Lorenzo; Seyfert, Paul; Shapkin, Mikhail; Shapoval, Illya; Shcheglov, Yury; Shears, Tara; Shekhtman, Lev; Shevchenko, Vladimir; Shires, Alexander; Silva Coutinho, Rafael; Simi, Gabriele; Sirendi, Marek; Skidmore, Nicola; Skillicorn, Ian; Skwarnicki, Tomasz; Smith, Edmund; Smith, Eluned; Smith, Iwan Thomas; Smith, Jackson; Smith, Mark; Snoek, Hella; Sokoloff, Michael; Soler, Paul; Soomro, Fatima; Souza, Daniel; Souza De Paula, Bruno; Spaan, Bernhard; Spradlin, Patrick; Sridharan, Srikanth; Stagni, Federico; Stahl, Marian; Stahl, Sascha; Steinkamp, Olaf; Stenyakin, Oleg; Sterpka, Christopher Francis; Stevenson, Scott; Stoica, Sabin; Stone, Sheldon; Storaci, Barbara; Stracka, Simone; Straticiuc, Mihai; Straumann, Ulrich; Sun, Liang; Sutcliffe, William; Swientek, Krzysztof; Swientek, Stefan; Syropoulos, Vasileios; Szczekowski, Marek; Szczypka, Paul; Szumlak, Tomasz; T'Jampens, Stephane; Tekampe, Tobias; Teklishyn, Maksym; Tellarini, Giulia; Teubert, Frederic; Thomas, Christopher; Thomas, Eric; van Tilburg, Jeroen; Tisserand, Vincent; Tobin, Mark; Todd, Jacob; Tolk, Siim; Tomassetti, Luca; Tonelli, Diego; Topp-Joergensen, Stig; Torr, Nicholas; Tournefier, Edwige; Tourneur, Stephane; Trabelsi, Karim; Tran, Minh Tâm; Tresch, Marco; Trisovic, Ana; Tsaregorodtsev, Andrei; Tsopelas, Panagiotis; Tuning, Niels; Ukleja, Artur; Ustyuzhanin, Andrey; Uwer, Ulrich; Vacca, Claudia; Vagnoni, Vincenzo; Valenti, Giovanni; Vallier, Alexis; Vazquez Gomez, Ricardo; Vazquez Regueiro, Pablo; Vázquez Sierra, Carlos; Vecchi, Stefania; Velthuis, Jaap; Veltri, Michele; Veneziano, Giovanni; Vesterinen, Mika; Viaud, Benoit; Vieira, Daniel; Vieites Diaz, Maria; Vilasis-Cardona, Xavier; Vollhardt, Achim; Volyanskyy, Dmytro; Voong, David; Vorobyev, Alexey; Vorobyev, Vitaly; Voß, Christian; de Vries, Jacco; Waldi, Roland; Wallace, Charlotte; Wallace, Ronan; Walsh, John; Wandernoth, Sebastian; Wang, Jianchun; Ward, David; Watson, Nigel; Websdale, David; Weiden, Andreas; Whitehead, Mark; Wiedner, Dirk; Wilkinson, Guy; Wilkinson, Michael; Williams, Mark Richard James; Williams, Matthew; Williams, Mike; Williams, Timothy; Wilson, Fergus; Wimberley, Jack; Wishahi, Julian; Wislicki, Wojciech; Witek, Mariusz; Wormser, Guy; Wotton, Stephen; Wright, Simon; Wyllie, Kenneth; Xie, Yuehong; Xu, Zhirui; Yang, Zhenwei; Yu, Jiesheng; Yuan, Xuhao; Yushchenko, Oleg; Zangoli, Maria; Zavertyaev, Mikhail; Zhang, Liming; Zhang, Yanxi; Zhelezov, Alexey; Zhokhov, Anatoly; Zhong, Liang

    2015-01-01

    We are deeply touched by the sudden loss of our dear friend and colleague Till Moritz Karbach. With this memorial book we wish to commemorate Moritz’ scientific legacy, and what Moritz meant to us as a friend.

  15. Scientific Letter: Monosymptomatic Hypochondriacal Psychosis ...

    African Journals Online (AJOL)

    Scientific Letter: Monosymptomatic Hypochondriacal Psychosis (somatic delusional disorder): A report of two cases. ... African Journal of Psychiatry. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives.

  16. Scientific impact: opportunity and necessity.

    Science.gov (United States)

    Cohen, Marlene Z; Alexander, Gregory L; Wyman, Jean F; Fahrenwald, Nancy L; Porock, Davina; Wurzbach, Mary E; Rawl, Susan M; Conn, Vicki S

    2010-08-01

    Recent National Institutes of Health changes have focused attention on the potential scientific impact of research projects. Research with the excellent potential to change subsequent science or health care practice may have high scientific impact. Only rigorous studies that address highly significant problems can generate change. Studies with high impact may stimulate new research approaches by changing understanding of a phenomenon, informing theory development, or creating new research methods that allow a field of science to move forward. Research with high impact can transition health care to more effective and efficient approaches. Studies with high impact may propel new policy developments. Research with high scientific impact typically has both immediate and sustained influence on the field of study. The article includes ideas to articulate potential scientific impact in grant applications as well as possible dissemination strategies to enlarge the impact of completed projects.

  17. High-End Scientific Computing

    Science.gov (United States)

    EPA uses high-end scientific computing, geospatial services and remote sensing/imagery analysis to support EPA's mission. The Center for Environmental Computing (CEC) assists the Agency's program offices and regions to meet staff needs in these areas.

  18. Scientific and Technological Report 2010

    International Nuclear Information System (INIS)

    Prado Cuba, Antonio; Santiago Contreras, Julio; Solis Veliz, Jose; Lopez Moreno, Edith

    2011-10-01

    This annual scientific and technological report provides an overview of research and development activities at Peruvian Institute of Nuclear Energy (IPEN) during the period from 1 january to 31 december, 2010. This report includes 41 papers divided in 8 subject matters, such as: physics and chemistry, materials science, nuclear engineering, mining industrial and environmental applications, medical and biological applications, radiation protection and nuclear safety, scientific instrumentation and management aspects. It also includes annexes. (APC)

  19. Scientific and Technological Report 2011

    International Nuclear Information System (INIS)

    Lopez Milla, Alcides; Prado Cuba, Antonio; Agapito Panta, Juan; Montoya Rossi, Eduardo

    2013-01-01

    This annual scientific and technological report provides an overview of research and development activities at Peruvian Institute of Nuclear Energy (IPEN) during the period from 1 january to 31 december, 2011. This report includes 30 papers divided in 8 subject matters, such as: physics and chemistry, materials science, nuclear engineering, mining industrial and environmental applications, medical and biological applications, radiation protection and nuclear safety, scientific instrumentation and management aspects. It also includes annexes. (APC)

  20. Science communication at scientific societies.

    Science.gov (United States)

    Braha, Jeanne

    2017-10-01

    Scientific societies can play a key role in bridging the research and practice of scientists' engagement of public audiences. Societies are beginning to support translation of science communication research, connections between scientists and audiences, and the creation of opportunities for scientists to engage publics without extensive customization. This article suggests roles, strategies, and mechanisms for scientific societies to promote and enhance their member's engagement of public audiences. Copyright © 2017 Elsevier Ltd. All rights reserved.

  1. Human-scientific Planning Theory

    OpenAIRE

    Hagen, Aksel

    1998-01-01

    This working report is a paper written to XII AESOP Congress 22 – 25 July 1998, Aveiro, Portugal. It is a presentation of human-scientific action theory and its linkage to planning, both planning theory and planning practice. Human-scientific action theory is created by professor Gunnar Olsson and professor José Luis Ramírez, Nordic School of Planning, Stockholm. Planning is primarily a practical and reflective activity. The notion ”Planning” may, therefore, describe the activi...

  2. Scientific Ethics: A New Approach.

    Science.gov (United States)

    Menapace, Marcello

    2018-06-04

    Science is an activity of the human intellect and as such has ethical implications that should be reviewed and taken into account. Although science and ethics have conventionally been considered different, it is herewith proposed that they are essentially similar. The proposal set henceforth is to create a new ethics rooted in science: scientific ethics. Science has firm axiological foundations and searches for truth (as a value, axiology) and knowledge (epistemology). Hence, science cannot be value neutral. Looking at standard scientific principles, it is possible to construct a scientific ethic (that is, an ethical framework based on scientific methods and rules), which can be applied to all sciences. These intellectual standards include the search for truth (honesty and its derivatives), human dignity (and by reflection the dignity of all animals) and respect for life. Through these it is thence achievable to draft a foundation of a ethics based purely on science and applicable beyond the confines of science. A few applications of these will be presented. Scientific ethics can have vast applications in other fields even in non scientific ones.

  3. Proceedings of the 20th particles and nuclei international conference PANIC2014

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, Alexander; Sander, Christian (eds.)

    2015-03-15

    The PANIC Conference is a major international conference that brings together astroparticle physics, elementary particle physics and nuclear physics. The conference takes place every 3 years, and in 2014 the event was held in Hamburg (Germany). The previous conference was organised by the Massachusetts Institute of Technology (MIT) in Cambridge (Massachusetts, USA) in 2011. This years conference was jointly organised by the Deutsches Elektronen Synchrotron (DESY) and the Institute for Experimental Physics of the University of Hamburg. One third of the 350 participants came from Germany, one third from Europe and one third from outside of Europe, it was a truly very international event. The conference took place from Monday, August 25, 2014 to Friday, August 29, 2014. The programme included five days of plenary and parallel sessions and a poster session, all held in the main building of the University of Hamburg, right in the heart of the city of Hamburg. The social programme consisted of a reception at the Hamburg City Hall, a half-day excursion, a concert at DESY, a conference dinner, and a public evening lecture by Prof. Albrecht Wagner, former director of DESY. During the conference, many results from the Large Hadron Collider (LHC) at CERN (Geneva, Switzerland) were presented together with final results from the experiments at the Tevatron collider at the Fermi National Accelerator Laboratory (Chicago) and at the HERA accelerator at DESY. A large number of physics studies were discussed also for an International Linear Collider (ILC) considered to be built in Japan. The conference programme included dedicated sessions on physics at the ILC and on the status of the project. In neutrino and nuclear physics, there are a number of medium- and small-size experiments that provide highly accurate results. These experiments are often complementary to those at large accelerators at the energy frontier. The PANIC conference provided an excellent overview of these

  4. Proceedings of the 20th particles and nuclei international conference PANIC2014

    International Nuclear Information System (INIS)

    Schmidt, Alexander; Sander, Christian

    2015-03-01

    The PANIC Conference is a major international conference that brings together astroparticle physics, elementary particle physics and nuclear physics. The conference takes place every 3 years, and in 2014 the event was held in Hamburg (Germany). The previous conference was organised by the Massachusetts Institute of Technology (MIT) in Cambridge (Massachusetts, USA) in 2011. This years conference was jointly organised by the Deutsches Elektronen Synchrotron (DESY) and the Institute for Experimental Physics of the University of Hamburg. One third of the 350 participants came from Germany, one third from Europe and one third from outside of Europe, it was a truly very international event. The conference took place from Monday, August 25, 2014 to Friday, August 29, 2014. The programme included five days of plenary and parallel sessions and a poster session, all held in the main building of the University of Hamburg, right in the heart of the city of Hamburg. The social programme consisted of a reception at the Hamburg City Hall, a half-day excursion, a concert at DESY, a conference dinner, and a public evening lecture by Prof. Albrecht Wagner, former director of DESY. During the conference, many results from the Large Hadron Collider (LHC) at CERN (Geneva, Switzerland) were presented together with final results from the experiments at the Tevatron collider at the Fermi National Accelerator Laboratory (Chicago) and at the HERA accelerator at DESY. A large number of physics studies were discussed also for an International Linear Collider (ILC) considered to be built in Japan. The conference programme included dedicated sessions on physics at the ILC and on the status of the project. In neutrino and nuclear physics, there are a number of medium- and small-size experiments that provide highly accurate results. These experiments are often complementary to those at large accelerators at the energy frontier. The PANIC conference provided an excellent overview of these

  5. Network effects on scientific collaborations.

    Directory of Open Access Journals (Sweden)

    Shahadat Uddin

    Full Text Available BACKGROUND: The analysis of co-authorship network aims at exploring the impact of network structure on the outcome of scientific collaborations and research publications. However, little is known about what network properties are associated with authors who have increased number of joint publications and are being cited highly. METHODOLOGY/PRINCIPAL FINDINGS: Measures of social network analysis, for example network centrality and tie strength, have been utilized extensively in current co-authorship literature to explore different behavioural patterns of co-authorship networks. Using three SNA measures (i.e., degree centrality, closeness centrality and betweenness centrality, we explore scientific collaboration networks to understand factors influencing performance (i.e., citation count and formation (tie strength between authors of such networks. A citation count is the number of times an article is cited by other articles. We use co-authorship dataset of the research field of 'steel structure' for the year 2005 to 2009. To measure the strength of scientific collaboration between two authors, we consider the number of articles co-authored by them. In this study, we examine how citation count of a scientific publication is influenced by different centrality measures of its co-author(s in a co-authorship network. We further analyze the impact of the network positions of authors on the strength of their scientific collaborations. We use both correlation and regression methods for data analysis leading to statistical validation. We identify that citation count of a research article is positively correlated with the degree centrality and betweenness centrality values of its co-author(s. Also, we reveal that degree centrality and betweenness centrality values of authors in a co-authorship network are positively correlated with the strength of their scientific collaborations. CONCLUSIONS/SIGNIFICANCE: Authors' network positions in co

  6. Autonomy vs. dependency of scientific collaboration in scientific performance

    Energy Technology Data Exchange (ETDEWEB)

    Chinchilla-Rodriguez, Z.; Miguel, S.; Perianes-Rodriguez, A.; Ovalle-Perandones, M.A.; Olmeda-Gomez, C.

    2016-07-01

    This article explores the capacity of Latin America in the generation of scientific knowledge and its visibility at the global level. The novelty of the contribution lies in the decomposition of leadership, plus its combination with the results of performance indicators. We compare the normalized citation of all output against the leading output, as well as scientific excellence (Chinchilla, et al. 2016a; 2016b), technological impact and the trends in collaboration types and normalized citation. The main goal is to determine to what extent the main Latin American producers of scientific output depend on collaboration to heighten research performance in terms of citation; or to the contrary, whether there is enough autonomy and capacity to leverage its competitiveness through the design of research and development agendas. To the best of our knowledge this is the first study adopting this approach at the country level within the field of N&N. (Author)

  7. Division of Mechanical Construction - Overview

    International Nuclear Information System (INIS)

    Halik, J.

    1999-01-01

    The Department of Mechanical Construction consists of the Design Group and the Mechanical Workshop. The activity of the Department includes the following: designs of devices and equipment for experiments in physics and their mechanical construction and assembly, particularly vacuum chambers and installations for HV and UHV; maintenance and upgrading of the existing installations and equipment in our Institute; participation of our engineers and technicians in design works, equipment assembly and maintenance for experiments in foreign laboratories. The Design Group is equipped with PC-computers and AutoCad graphic software (release 12 and 13) what allows to make drawings and a mechanical documentation which meets world standards. Also ANSYS (version 5.2) - a software for mechanical, heat and magnetic calculations using finite-elements methods is used in our design activity. The Mechanical Workshop can offer a wide range of machining and treatment methods with satisfactory tolerances and surface quality. In 1998 the Department of Mechanical Construction designed, manufactured and assembled an equipment for the following foreign laboratories: Deutches Elektronen Synchrotron, Hamburg, FRG; Jagiellonian University, Cracow; Massachusetts Institute of Technology, Cambridge, Massachusetts, USA; University of Rochester. Rochester, NY, USA; Brookhaven National Laboratory, Upton, NY, USA. Besides the large designs and systems described below, some interesting works have been made for the departments of our Institute and other institutions: 1. The works for Cyclotron Section: The assembly of dipole magnet for extraction the cyclotron beam: - design and manufacturing of technological device for winding magnet coils; - winding of 16 coils; - manufacturing and assembly of magnet collars driving system; - design and manufacturing of vacuum chamber placed inside the magnet; - manufacturing of magnet cooling system; assembly of remachined magnet yoke and mentioned above units

  8. Tomography of the electron beam transverse phase space at PITZ

    Energy Technology Data Exchange (ETDEWEB)

    Asova, Galina

    2013-09-15

    The operation of a Free Elector Laser, FEL, requires high energy, high peak current electron beams with small transverse emittance. In the contemporary FELs, the electron beam is passed through a periodic magnetic structure - an undulator - which modifies the straight beam trajectory into a sinusoidal one, where FEL light is generated at each bend. According to the energy, the transverse emittance and the peak current of the beam and the parameters of the undulator, FEL radiation with wavelength in the range of nano- to micrometers can be generated. Studies and development of FELs are done all over the world. The Free electron LASer in Hamburg, FLASH, and the international European X-ray FEL, XFEL, in Hamburg, Germany, are two leading projects of the Deutsches Elektronen SYnchrotron, DESY. Part of the research program on FELs in DESY is realized in Zeuthen within the project Photo-Injector Test Facility at DESY in Zeuthen, PITZ. PITZ is an international collaboration including Germany, Russia, Italy, France, Bulgaria, Thailand, United Kingdom. The Institute of Nuclear Research and Nuclear Energy, INRNE, at the Bulgarian Academy of Sciences participates from bulgarian side. PITZ studies and optimizes the photo-injectors for FLASH and the XFEL. The research program emphasizes on detailed measurements of the transverse phase-space density distribution. Until 2010 the single slit scan technique has been used to measure the beam transverse distributions. At the end of 2010 a module for tomographic diagnostics has been installed which extends the possibilities of PITZ to measure simultaneously the two transverse planes of a single micropulse with improved signal-to-noise ratio. The difficult conditions of low emittance for high bunch charge and low energy make the operation of the module challenging. This thesis presents the design considerations for the tomography module, a number of reconstruction algorithms and their applicability to limited data sets, the influence

  9. Tomography of the electron beam transverse phase space at PITZ

    International Nuclear Information System (INIS)

    Asova, Galina

    2013-09-01

    The operation of a Free Elector Laser, FEL, requires high energy, high peak current electron beams with small transverse emittance. In the contemporary FELs, the electron beam is passed through a periodic magnetic structure - an undulator - which modifies the straight beam trajectory into a sinusoidal one, where FEL light is generated at each bend. According to the energy, the transverse emittance and the peak current of the beam and the parameters of the undulator, FEL radiation with wavelength in the range of nano- to micrometers can be generated. Studies and development of FELs are done all over the world. The Free electron LASer in Hamburg, FLASH, and the international European X-ray FEL, XFEL, in Hamburg, Germany, are two leading projects of the Deutsches Elektronen SYnchrotron, DESY. Part of the research program on FELs in DESY is realized in Zeuthen within the project Photo-Injector Test Facility at DESY in Zeuthen, PITZ. PITZ is an international collaboration including Germany, Russia, Italy, France, Bulgaria, Thailand, United Kingdom. The Institute of Nuclear Research and Nuclear Energy, INRNE, at the Bulgarian Academy of Sciences participates from bulgarian side. PITZ studies and optimizes the photo-injectors for FLASH and the XFEL. The research program emphasizes on detailed measurements of the transverse phase-space density distribution. Until 2010 the single slit scan technique has been used to measure the beam transverse distributions. At the end of 2010 a module for tomographic diagnostics has been installed which extends the possibilities of PITZ to measure simultaneously the two transverse planes of a single micropulse with improved signal-to-noise ratio. The difficult conditions of low emittance for high bunch charge and low energy make the operation of the module challenging. This thesis presents the design considerations for the tomography module, a number of reconstruction algorithms and their applicability to limited data sets, the influence

  10. Biomedical ontologies: toward scientific debate.

    Science.gov (United States)

    Maojo, V; Crespo, J; García-Remesal, M; de la Iglesia, D; Perez-Rey, D; Kulikowski, C

    2011-01-01

    Biomedical ontologies have been very successful in structuring knowledge for many different applications, receiving widespread praise for their utility and potential. Yet, the role of computational ontologies in scientific research, as opposed to knowledge management applications, has not been extensively discussed. We aim to stimulate further discussion on the advantages and challenges presented by biomedical ontologies from a scientific perspective. We review various aspects of biomedical ontologies going beyond their practical successes, and focus on some key scientific questions in two ways. First, we analyze and discuss current approaches to improve biomedical ontologies that are based largely on classical, Aristotelian ontological models of reality. Second, we raise various open questions about biomedical ontologies that require further research, analyzing in more detail those related to visual reasoning and spatial ontologies. We outline significant scientific issues that biomedical ontologies should consider, beyond current efforts of building practical consensus between them. For spatial ontologies, we suggest an approach for building "morphospatial" taxonomies, as an example that could stimulate research on fundamental open issues for biomedical ontologies. Analysis of a large number of problems with biomedical ontologies suggests that the field is very much open to alternative interpretations of current work, and in need of scientific debate and discussion that can lead to new ideas and research directions.

  11. Betting on better scientific literacy

    CERN Multimedia

    Daisy Yuhas

    Dmitry Zimin, founder of the Russian philanthropic foundation Dynasty, visited CERN on 23 October. Zimin, who is himself a scientist and businessman, founded Dynasty in order to support scientific education and a greater public understanding of scientific thinking. Zimin met the Bulletin to reflect on the experience and what had interested him about CERN. Zimin, who had read about and researched CERN before his visit, felt prepared for the physics at CERN but was greatly impressed by the collaborative “brainforce.” He observed that “The organization of all of these people is not less important as an achievement than all of the technical achievements, the collider, the experiments.” He was amazed at “how CERN has been able to organize such a grand collaboration of different people from different institutes of countries from all over the world.” At the core of the Dynasty Foundation’s ideals is the dissemination of scientific thought. Zimin ...

  12. The scientific status of fusion

    International Nuclear Information System (INIS)

    Crandall, D.H.

    1989-01-01

    The development of fusion energy has been a large-scale scientific undertaking of broad interest. The magnetic plasma containment in tokamaks and the laser-drive ignition of microfusion capsules appear to be scientifically feasible sources of energy. These concepts are bounded by questions of required intensity in magnetid field and plasma currents or in drive energy and, for both concepts, by issues of plasma stability and energy transport. The basic concept and the current scientific issues are described for magnetic fusion and for the interesting, but likely infeasible, muon-catalyzed fusion concept. Inertial fusion is mentioned, qualitatively, to complete the context. For magnetic fusion, the required net energy production within the plasma may be accomplished soon, but the more useful goal of self-sustained plasma ignition requires a new device of somewhat uncertain (factor of 2) cost and size. (orig.)

  13. Scientific Utopia: An agenda for improving scientific communication (Invited)

    Science.gov (United States)

    Nosek, B.

    2013-12-01

    The scientist's primary incentive is publication. In the present culture, open practices do not increase chances of publication, and they often require additional work. Practicing the abstract scientific values of openness and reproducibility thus requires behaviors in addition to those relevant for the primary, concrete rewards. When in conflict, concrete rewards are likely to dominate over abstract ones. As a consequence, the reward structure for scientists does not encourage openness and reproducibility. This can be changed by nudging incentives to align scientific practices with scientific values. Science will benefit by creating and connecting technologies that nudge incentives while supporting and improving the scientific workflow. For example, it should be as easy to search the research literature for my topic as it is to search the Internet to find hilarious videos of cats falling off of furniture. I will introduce the Center for Open Science (http://centerforopenscience.org/) and efforts to improve openness and reproducibility such as http://openscienceframework.org/. There will be no cats.

  14. Similarity measures for scientific workflows

    OpenAIRE

    Starlinger, Johannes

    2016-01-01

    In Laufe der letzten zehn Jahre haben Scientific Workflows als Werkzeug zur Erstellung von reproduzierbaren, datenverarbeitenden in-silico Experimenten an Aufmerksamkeit gewonnen, in die sowohl lokale Skripte und Anwendungen, als auch Web-Services eingebunden werden können. Über spezialisierte Online-Bibliotheken, sogenannte Repositories, können solche Workflows veröffentlicht und wiederverwendet werden. Mit zunehmender Größe dieser Repositories werden Ähnlichkeitsmaße für Scientific Workfl...

  15. The role of scientific institutions

    International Nuclear Information System (INIS)

    Gonzalez, A.J.

    2002-01-01

    The topic that was requested to address at this Nea seminar is the role (i.e., what is expected to be done) by institutions (i.e., organisations for the promotion of a public object) of a scientific nature (assisted by expert knowledge), with regard to a better integration of radiation protection in modern society. The scientific radiation protection institutions at an international level are the I.C.R.P. (non governmental), UNSCEAR (governmental) and the IAEA, acting together as an international forum. They are the focus of this paper. (N.C.)

  16. Scientific publications 1973-1974

    International Nuclear Information System (INIS)

    1976-01-01

    This catalogue supplements the HMI report 'Scientific publications 1958-1972' (HMI-B-142). It lists all the publications by the Hahn-Meitner-Institut fuer Kernforschung Berlin of the years 1973-1974. The catalogue contains progress reports, dissertations, publications from scientific journals and anthologies if these are available in print. The titles listed in this catalogue are based on the HMI's annual reports. The classification according to fields and departments follows the development of the institute as outlined in the annual reports. Further classification is done according to the year of publication. (orig./HK) [de

  17. Paul Scherrer Institute Scientific Report 1999. Volume I: Particles and Matter

    Energy Technology Data Exchange (ETDEWEB)

    Gobrecht, J.; Gaeggeler, H.; Herlach, D.; Junker, K.; Kettle, P.-R.; Kubik, P.; Zehnder, A. [eds.

    2000-07-01

    lthough originally planned for fundamental research in nuclear physics, the particle beams of pions, muons, protons and neutrons are now used in a large variety of disciplines in both natural science and medicine. The beams at PSI have the world's highest intensities and therefore allow certain experiments to be performed, which would not be possible elsewhere. The highlight of research this year was the first-ever determination of the chemical properties of the superheavy element {sup 107} Bohrium. This was undertaken, by an international team led by H. Gaeggeler of PSI's Laboratory for Radiochemistry. Bohrium was produced by bombarding a Berkelium target with Neon ions from the Injector I cyclotron and six atoms were detected after having passed through an online gas chromatography device. At the Laboratory for Particle Physics the focus has shifted from nuclear physics to elementary particle physics with about a fifty-fifty split between investigations of rare processes or particle decays using the high intensity muon, pion and recently also polarized neutron beams of PSI, and research at the highest energy frontier at CERN (Geneva) and DESY (Hamburg). Important space instrumentation has been contributed by the Laboratory for Astrophysics to the European Space Agency and NASA satellite programmes. The Laboratory for Micro and Nanotechnology continued to focus on research into molecular nanotechnology and SiGeC nanostructures, the latter with the aim of producing silicon based optoelectronics. Progress in 1999 in these topical areas is described in this report. A list of scientific publications in 1999 is also provided.

  18. Scientific opportunities in nuclear resonance spectroscopy from source-driven revolution

    Energy Technology Data Exchange (ETDEWEB)

    Shenoy, G. K., E-mail: gks@aps.anl.gov [Argonne National Laboratory (United States); Roehlsberger, R. [Deutsches Elektronen Synchrotron, DESY (Germany)

    2008-02-15

    From the beginning of its discovery the Moessbauer effect has continued to be one of the most powerful tools with broad applications in diverse areas of science and technology. With the advent of synchrotron radiation sources such as the Advanced Photon Source (APS), the European Synchrotron Radiation Facility (ESRF) and the Super Photon Ring-8 (SPring-8), the tool has enlarged its scope and delivered new capabilities. The popular techniques most generally used in the field of materials physics, chemical physics, geoscience, and biology are hyperfine spectroscopy via elastic nuclear forward scattering (NFS), vibrational spectroscopy via nuclear inelastic scattering (NRIXS), and, to a lesser extent, diffusional dynamics from quasielastic nuclear forward scattering (QNFS). As we look ahead, new storage rings with enhanced brilliance such as PETRA-III under construction at DESY, Hamburg, and PEP-III in its early design stage at SLAC, Stanford, will provide new and unique science opportunities. In the next two decades, x-ray free-electron lasers (XFELs), based both on self-amplified spontaneous emission (SASE-XFELs) and a seed (SXFELs), with unique time structure, coherence and a five to six orders higher average brilliance will truly revolutionize nuclear resonance applications in a major way. This overview is intended to briefly address the unique radiation characteristics of new sources on the horizon and to provide a glimpse of scientific prospects and dreams in the nuclear resonance field from the new radiation sources. We anticipate an expanded nuclear resonance research activity with applications such as spin and phonon mapping of a single nanostructure and their assemblies, interfaces, and surfaces; spin dynamics; nonequilibrium dynamics; photochemical reactions; excited-state spectroscopy; and nonlinear phenomena.

  19. PREFACE: International Conference on Computing in High Energy and Nuclear Physics (CHEP 2010)

    Science.gov (United States)

    Lin, Simon C.; Shen, Stella; Neufeld, Niko; Gutsche, Oliver; Cattaneo, Marco; Fisk, Ian; Panzer-Steindel, Bernd; Di Meglio, Alberto; Lokajicek, Milos

    2011-12-01

    & Genoa University/INFN, Switzerland Lothar Bauerdick, Fermilab, USA Ian Bird, CERN, Switzerland Amber Boehnlein, US Department of Energy, USA Kors Bos, CERN, Switzerland Federico Carminati, CERN, Switzerland Philippe Charpentier, CERN, Switzerland Gang Chen, Institute of High Energy Physics, China Peter Clarke, University of Edinburgh, UK Michael Ernst, Brookhaven National Laboratory, USA David Foster, CERN, Switzerland Merino Gonzalo, CIEMAT, Spain John Gordon, STFC-RAL, UK Volker Guelzow, Deutsches Elektronen-Synchrotron DESY, Hamburg, Germany John Harvey, CERN, Switzerland Frederic Hemmer, CERN, Switzerland Hafeez Hoorani, NCP, Pakistan Viatcheslav Ilyin, Moscow State University, Russia Matthias Kasemann, DESY, Germany Nobuhiko Katayama, KEK, Japan Milos Lokajícek, FZU Prague, Czech Republic David Malon, ANL, USA Pere Mato Vila, CERN, Switzerland Mirco Mazzucato, INFN CNAF, Italy Richard Mount, SLAC, USA Harvey Newman, Caltech, USA Mitsuaki Nozaki, KEK, Japan Farid Ould-Saada, University of Oslo, Norway Ruth Pordes, Fermilab, USA Hiroshi Sakamoto, The University of Tokyo, Japan Alberto Santoro, UERJ, Brazil Jim Shank, Boston University, USA Alan Silverman, CERN, Switzerland Randy Sobie , University of Victoria, Canada Dongchul Son, Kyungpook National University, South Korea Reda Tafirout , TRIUMF, Canada Victoria White, Fermilab, USA Guy Wormser, LAL, France Frank Wuerthwein, UCSD, USA Charles Young, SLAC, USA

  20. The Effectiveness of Scientific Inquiry With/Without Integration of Scientific Reasoning

    Science.gov (United States)

    Chen, Chun-Ting; She, Hsiao-Ching

    2015-01-01

    This study examines the difference in effectiveness between two scientific inquiry programs-one with an emphasis on scientific reasoning and one without a scientific reasoning component-on students' scientific concepts, scientific concept-dependent reasoning, and scientific inquiry. A mixed-method approach was used in which 115 grade 5…

  1. Building Bridges through Scientific Conferences

    DEFF Research Database (Denmark)

    Zierath, Juleen R

    2016-01-01

    Getting together to exchange ideas, forge collaborations, and disseminate knowledge is a long-standing tradition of scientific communities. How conferences are serving the community, what their current challenges are, and what is in store for the future of conferences are the topics covered...

  2. Scientific Assistant Virtual Laboratory (SAVL)

    Science.gov (United States)

    Alaghband, Gita; Fardi, Hamid; Gnabasik, David

    2007-03-01

    The Scientific Assistant Virtual Laboratory (SAVL) is a scientific discovery environment, an interactive simulated virtual laboratory, for learning physics and mathematics. The purpose of this computer-assisted intervention is to improve middle and high school student interest, insight and scores in physics and mathematics. SAVL develops scientific and mathematical imagination in a visual, symbolic, and experimental simulation environment. It directly addresses the issues of scientific and technological competency by providing critical thinking training through integrated modules. This on-going research provides a virtual laboratory environment in which the student directs the building of the experiment rather than observing a packaged simulation. SAVL: * Engages the persistent interest of young minds in physics and math by visually linking simulation objects and events with mathematical relations. * Teaches integrated concepts by the hands-on exploration and focused visualization of classic physics experiments within software. * Systematically and uniformly assesses and scores students by their ability to answer their own questions within the context of a Master Question Network. We will demonstrate how the Master Question Network uses polymorphic interfaces and C# lambda expressions to manage simulation objects.

  3. Scientific applications of symbolic computation

    International Nuclear Information System (INIS)

    Hearn, A.C.

    1976-02-01

    The use of symbolic computation systems for problem solving in scientific research is reviewed. The nature of the field is described, and particular examples are considered from celestial mechanics, quantum electrodynamics and general relativity. Symbolic integration and some more recent applications of algebra systems are also discussed [fr

  4. Trieste's lesson in scientific communication

    International Nuclear Information System (INIS)

    1968-01-01

    The opening of the new home of the International Centre for Theoretical Physics in Trieste also marked the start of a most important manifestation in science - a review of the whole of contemporary physics carried out by world leaders of scientific thought. Eight Nobel Laureates were included among more than 300 distinguished participants. (author)

  5. Communication; A Scientific American Book.

    Science.gov (United States)

    Scientific American, Inc., New York, NY.

    With present advances in communication technology, profound and qualitative changes in our civilization are taking place--in business and politics, in education, in entertainment, interpersonal relations, and the organization of society itself. In honor of the significance of such developments, an entire issue of "Scientific American" magazine…

  6. The Evolution of Scientific Knowledge

    DEFF Research Database (Denmark)

    Jensen, Hans Siggaard; Ricard, Lykke Margot; Vendelø, Morten Thanning

    The Evolution of Scientific Knowledge aims to reach a unique understanding of science with the help of economic and sociological theories. They use institutional and evolutionary theories and the sociological theories draw from the type of work on social studies of science that have, in recent...

  7. Report of scientific results 1977

    International Nuclear Information System (INIS)

    1977-01-01

    The scientific progress report of the HMI for 1977 gives a survey of the main results of HMI research in the fields of neutron scattering, radiation damage in solids, reactor chemistry, trace element research in biomedicine, geochemistry, reactor operation, and radionuclide production. After this, short summaries are given of HMI publications and papers in the above fields. (HK) [de

  8. Scientific and Technological Report 2004

    International Nuclear Information System (INIS)

    Prado Cuba, Antonio; Robles Nique, Anita; Solis Veliz, Jose; Rodriguez R, Juan

    2005-08-01

    This annual scientific and technological report provides an overview of research and development activities at Peruvian Institute of Nuclear Energy (IPEN) during the period from 1 january to 31 december, 2004. This report includes 48 papers divided in 6 subject matters, such as: materials science, nuclear engineering, industrial and environmental applications, medical and biological applications, radiation protection and nuclear safety, and management aspects

  9. The art of scientific writing

    NARCIS (Netherlands)

    Wopereis, Iwan

    2018-01-01

    This three-part workshop introduces strategies, tools, and techniques for sound scientific output. It discusses success and failure factors relevant to the publication process (writing included). The first part aims to understand the entire publication process. It presents an overview of standard

  10. How Old Is Scientific Psychology?

    Science.gov (United States)

    Harding, John S.

    Scientific psychology did not begin with Fechner and Wundt in the 19th century; its roots actually stretch back to 18th century Germany. The only detailed account of this period was published by Max Dessoir more than 80 years ago. Dessoir identified some of the crucial figures in early psychology, including Wolff, Bonnet, Kruger, Hissman, and…

  11. Scientific knowledge and modern prospecting

    Science.gov (United States)

    Neuerburg, G.J.

    1985-01-01

    Modern prospecting is the systematic search for specified and generally ill-exposed components of the Earth's crust known as ore. This prospecting depends entirely on reliable, or scientific knowledge for guidance and for recognition of the search objects. Improvement in prospecting results from additions and refinements to scientific knowledge. Scientific knowledge is an ordered distillation of observations too numerous and too complex in themselves for easy understanding and for effective management. The ordering of these observations is accomplished by an evolutionary hierarchy of abstractions. These abstractions employ simplified descriptions consisting of characterization by selected properties, sampling to represent much larger parts of a phenomenon, generalized mappings of patterns of geometrical and numerical relations among properties, and explanation (theory) of these patterns as functional relations among the selected properties. Each abstraction is predicated on the mode of abstraction anticipated for the next higher level, so that research is a deductive process in which the highest level, theory, is indispensible for the growth and refinement of scientific knowledge, and therefore of prospecting methodology. ?? 1985 Springer-Verlag.

  12. Scientific Reporting: Raising the Standards

    Science.gov (United States)

    McLeroy, Kenneth R.; Garney, Whitney; Mayo-Wilson, Evan; Grant, Sean

    2016-01-01

    This article is based on a presentation that was made at the 2014 annual meeting of the editorial board of "Health Education & Behavior." The article addresses critical issues related to standards of scientific reporting in journals, including concerns about external and internal validity and reporting bias. It reviews current…

  13. Teaching scientific integrity through statistics

    NARCIS (Netherlands)

    van Duijn, Marijtje A.J.; Post, Wendy J.; Makar, Katie; de Sousa, Bruno; Gould, Robert1

    In the past years, Dutch academia was confronted with several cases of fraud. The Stapel investigation revealed that the prevailing research culture allowed questionable research practices (QRP). As a consequence, there is an ongoing debate on how to prevent academic misconduct. Teaching scientific

  14. Scientific Instruments and Epistemology Engines

    Czech Academy of Sciences Publication Activity Database

    Dvořák, Tomáš

    2012-01-01

    Roč. 34, č. 4 (2012), s. 529-540 ISSN 1210-0250 R&D Projects: GA ČR(CZ) GAP401/11/2338 Institutional support: RVO:67985955 Keywords : material culture of science * scientific instruments * epistemology engines * experimental systems Subject RIV: AA - Philosophy ; Religion

  15. Biology, Philosophy, and Scientific Method.

    Science.gov (United States)

    Hill, L.

    1985-01-01

    The limits of falsification are discussed and the historically based models of science described by Lakatos and Kuhn are shown to offer greater insights into the practice of science. The theory of natural selection is used to relate biology to philosophy and scientific method. (Author/JN)

  16. Scientific 'Laws', 'Hypotheses' and 'Theories'

    Indian Academy of Sciences (India)

    verified, the hypothesis changes from the status of a 'mere' hypothesis, and ... a pre-existing law and the body of facts upon which that law is based. Hypotheses .... implicit belief that order objectively exists in nature, and that scientific laws ...

  17. Promoting Science Learning and Scientific Identification through Contemporary Scientific Investigations

    Science.gov (United States)

    Van Horne, Katie

    This dissertation investigates the implementation issues and the educational opportunities associated with "taking the practice turn" in science education. This pedagogical shift focuses instructional experiences on engaging students in the epistemic practices of science both to learn the core ideas of the disciplines, as well as to gain an understanding of and personal connection to the scientific enterprise. In Chapter 2, I examine the teacher-researcher co-design collaboration that supported the classroom implementation of a year-long, project-based biology curriculum that was under development. This study explores the dilemmas that arose when teachers implemented a new intervention and how the dilemmas arose and were managed throughout the collaboration of researchers and teachers and between the teachers. In the design-based research of Chapter 3, I demonstrate how students' engagement in epistemic practices in contemporary science investigations supported their conceptual development about genetics. The analysis shows how this involved a complex interaction between the scientific, school and community practices in students' lives and how through varied participation in the practices students come to write about and recognize how contemporary investigations can give them leverage for science-based action outside of the school setting. Finally, Chapter 4 explores the characteristics of learning environments for supporting the development of scientific practice-linked identities. Specific features of the learning environment---access to the intellectual work of the domain, authentic roles and accountability, space to make meaningful contributions in relation to personal interests, and practice-linked identity resources that arose from interactions in the learning setting---supported learners in stabilizing practice-linked science identities through their engagement in contemporary scientific practices. This set of studies shows that providing students with the

  18. Deathcore, creativity, and scientific thinking

    Science.gov (United States)

    Angeler, David G.; Sundstrom, Shana M.; Allen, Craig R.

    2016-01-01

    BackgroundMajor scientific breakthroughs are generally the result of materializing creative ideas, the result of an inductive process that sometimes spontaneously and unexpectedly generates a link between thoughts and/or objects that did not exist before. Creativity is the cornerstone of scientific thinking, but scientists in academia are judged by metrics of quantification that often leave little room for creative thinking. In many scientific fields, reductionist approaches are rewarded and new ideas viewed skeptically. As a result, scientific inquiry is often confined to narrow but safe disciplinary ivory towers, effectively preventing profoundly creative explorations that could yield unexpected benefits.New informationThis paper argues how apparently unrelated fields specifically music and belief systems can be combined in a provocative allegory to provide novel perspectives regarding patterns in nature, thereby potentially inspiring innovation in the natural, social and other sciences. The merger between basic human tensions such as those embodied by religion and music, for example the heavy metal genre of deathcore, may be perceived as controversial, challenging, and uncomfortable. However, it is an example of moving the thinking process out of unconsciously established comfort zones, through the connection of apparently unrelated entities. We argue that music, as an auditory art form, has the potential to enlighten and boost creative thinking in science. Metal, as a fast evolving and diversifying extreme form of musical art, may be particularly suitable to trigger surprising associations in scientific inquiry. This may pave the way for dealing with questions about what we don´t know that we don´t know in a fast-changing planet.

  19. Software Defects, Scientific Computation and the Scientific Method

    CERN Multimedia

    CERN. Geneva

    2011-01-01

    Computation has rapidly grown in the last 50 years so that in many scientific areas it is the dominant partner in the practice of science. Unfortunately, unlike the experimental sciences, it does not adhere well to the principles of the scientific method as espoused by, for example, the philosopher Karl Popper. Such principles are built around the notions of deniability and reproducibility. Although much research effort has been spent on measuring the density of software defects, much less has been spent on the more difficult problem of measuring their effect on the output of a program. This talk explores these issues with numerous examples suggesting how this situation might be improved to match the demands of modern science. Finally it develops a theoretical model based on an amalgam of statistical mechanics and Hartley/Shannon information theory which suggests that software systems have strong implementation independent behaviour and supports the widely observed phenomenon that defects clust...

  20. 50 CFR 600.512 - Scientific research.

    Science.gov (United States)

    2010-10-01

    ... 50 Wildlife and Fisheries 8 2010-10-01 2010-10-01 false Scientific research. 600.512 Section 600... research. (a) Scientific research activity. Persons planning to conduct scientific research activities on board a scientific research vessel in the EEZ that may be confused with fishing are encouraged to submit...

  1. 50 CFR 35.11 - Scientific uses.

    Science.gov (United States)

    2010-10-01

    ... NATIONAL WILDLIFE REFUGE SYSTEM WILDERNESS PRESERVATION AND MANAGEMENT General Rules § 35.11 Scientific uses. Recognizing the scientific value of wilderness, research data gathering and similar scientific... 50 Wildlife and Fisheries 6 2010-10-01 2010-10-01 false Scientific uses. 35.11 Section 35.11...

  2. Transactions of the Zimbabwe Scientific Association

    African Journals Online (AJOL)

    The Zimbabwe Scientific Association was founded in Bulawayo in 1899 (called the Rhodesia Scientific Assocation at the time) to promote the study and advancement of science in Zimbabwe and to facilitate the acquisition and dissemination of scientific knowledge. Its journal, Transactions of the Zimbabwe Scientific ...

  3. Popularization of science and scientific journalism: possibilities of scientific literacy

    Directory of Open Access Journals (Sweden)

    Alessandro Augusto Barros Façanha

    2017-07-01

    Full Text Available This study evidences the intersection between science education and communication in the perspective of the popularization of sciences based on the evidence produced in a specific column of a large circulation newspaper of the city of Teresina / PI. The discussions were based on the analysis of content carried out in the context of science classes in a school of basic education with elementary students, where journalistic texts were used with diverse themes that involved science and daily life in order to understand the interpretation of texts And the relationship with the context of scientific dissemination and citizenship. The analysis of the content was used and the answers were stratified into categories of conceptual nature and application of the themes. The analyses show that the texts of scientific dissemination have a contribution in relation to the popularization of Sciences, fomentation to the debate in the classroom, didactic increment in the classes of sciences, in spite of their insertion still incipient in the context of science education. However, the results of the research denote the difficulty faced by the students in understanding the text of dissemination in their conceptual comprehension and resolution of daily problems, as well as the distance between the context of the sciences in their theoretical scope and their presentation in everyday situations, Despite this, the texts of divulgation corroborated as an important way of real insertion in the process of scientific literacy and promotion of citizenship.

  4. 5 February 2010: Romanian Former Minister of Justice V. Stoica (4th from left) visiting SM18 with, from left to right, University of Bucharest Faculty of Physics A. Costescu, DESY Hamburg C. Diaconu; Mrs Valeriu Stoica; Université de Montpellier II S. Ciulli; Technology Department Vacuum, Surfaces and Coatings group S. Ilie; Technology Department Head F. Bordry and Adviser for Russian Federation, Central and Eastern Europe T. Kurtyka.

    CERN Multimedia

    Maximilien Brice

    2010-01-01

    5 February 2010: Romanian Former Minister of Justice V. Stoica (4th from left) visiting SM18 with, from left to right, University of Bucharest Faculty of Physics A. Costescu, DESY Hamburg C. Diaconu; Mrs Valeriu Stoica; Université de Montpellier II S. Ciulli; Technology Department Vacuum, Surfaces and Coatings group S. Ilie; Technology Department Head F. Bordry and Adviser for Russian Federation, Central and Eastern Europe T. Kurtyka.

  5. The (Surplus) Value of Scientific Communication

    OpenAIRE

    Fröhlich, Gerhard

    1996-01-01

    In research on scientific communication there are above all theory-less and formal/natural scientific models of scientific communication. These are juxtaposed to social-scientific, power-sensitive models (Elias, Bourdieu, Merton). The (surplus) value of scientific communication can be variously understood: either as inherent surplus values in the sense of potential effects of stimulation, synergy, critique, quality control; or as symbolic surplus value in the sense of symbolic capital (Bourdi...

  6. CERN Scientific Book Fair 2013

    CERN Multimedia

    CERN Library

    2013-01-01

    The CERN Bookshop and CERN Library invite you to attend the 2013 CERN Book Fair, a two-day scientific event offering you the opportunity to meet key publishers and to browse and purchase books at significant discounts.   Key publishers will present a selection of titles in physics, technology, mathematics, engineering, computing and popular science. You are welcome to come along and meet the publishers’ representatives or simply have a look at the books on sale. The fair will take place in the Main Building (Bldg. 500) on the ground floor near Restaurant 1 on Monday 9 and Tuesday 10 September. Participating or represented publishers include: Oxford University Press, Princeton University Press, Springer, Wiley, and World Scientific-Imperial College Press. Fair opening times:  - Monday 9 September 9:00 - 18:00  - Tuesday 10 September 9:00 - 18:00

  7. CERN scientific book fair 2010

    CERN Document Server

    CERN Library

    2010-01-01

    The CERN Bookshop and CERN Library invite you to attend the 2010 CERN Book Fair, a two-day scientific event offering you the opportunity to meet key publishers and to browse and purchase books at significant discounts.   Some twelve companies will be present and will bring with them a selection of titles in physics, technology, mathematics, engineering, computing and popular science. You are welcome to come along and meet the publishers’ representatives or simply have a look to the books on offer. The Fair will take place in the Main Building (bldg. 500) on the ground floor near the Restaurant 1 on Tuesday 7th and Wednesday 8th September. Participating or represented publishers include: Cambridge University Press, EPFL Press – PPUR, Oxford University Press, Imperial College Press, McGraw-Hill, Oxford University Press, Pearson Education, Princeton University Press, Springer, Taylor and Francis, Wiley, World Scientific. Fair opening times: Tuesday 7 September 9:00 &ndash...

  8. Cyber-Enabled Scientific Discovery

    International Nuclear Information System (INIS)

    Chan, Tony; Jameson, Leland

    2007-01-01

    It is often said that numerical simulation is third in the group of three ways to explore modern science: theory, experiment and simulation. Carefully executed modern numerical simulations can, however, be considered at least as relevant as experiment and theory. In comparison to physical experimentation, with numerical simulation one has the numerically simulated values of every field variable at every grid point in space and time. In comparison to theory, with numerical simulation one can explore sets of very complex non-linear equations such as the Einstein equations that are very difficult to investigate theoretically. Cyber-enabled scientific discovery is not just about numerical simulation but about every possible issue related to scientific discovery by utilizing cyberinfrastructure such as the analysis and storage of large data sets, the creation of tools that can be used by broad classes of researchers and, above all, the education and training of a cyber-literate workforce

  9. Tracing Young Children's Scientific Reasoning

    Science.gov (United States)

    Tytler, Russell; Peterson, Suzanne

    2003-08-01

    This paper explores the scientific reasoning of 14 children across their first two years of primary school. Children's view of experimentation, their approach to exploration, and their negotiation of competing knowledge claims, are interpreted in terms of categories of epistemological reasoning. Children's epistemological reasoning is distinguished from their ability to control variables. While individual children differ substantially, they show a relatively steady growth in their reasoning, with some contextual variation. A number of these children are reasoning at a level well in advance of curriculum expectations, and it is argued that current recommended practice in primary science needs to be rethought. The data is used to explore the relationship between reasoning and knowledge, and to argue that the generation and exploration of ideas must be the key driver of scientific activity in the primary school.

  10. Genealogical Trees of Scientific Papers.

    Science.gov (United States)

    Waumans, Michaël Charles; Bersini, Hugues

    2016-01-01

    Many results have been obtained when studying scientific papers citations databases in a network perspective. Articles can be ranked according to their current in-degree and their future popularity or citation counts can even be predicted. The dynamical properties of such networks and the observation of the time evolution of their nodes started more recently. This work adopts an evolutionary perspective and proposes an original algorithm for the construction of genealogical trees of scientific papers on the basis of their citation count evolution in time. The fitness of a paper now amounts to its in-degree growing trend and a "dying" paper will suddenly see this trend declining in time. It will give birth and be taken over by some of its most prevalent citing "offspring". Practically, this might be used to trace the successive published milestones of a research field.

  11. Characteristics of scientific web publications

    DEFF Research Database (Denmark)

    Thorlund Jepsen, Erik; Seiden, Piet; Ingwersen, Peter Emil Rerup

    2004-01-01

    were generated based on specifically selected domain topics that are searched for in three publicly accessible search engines (Google, AllTheWeb, and AltaVista). A sample of the retrieved hits was analyzed with regard to how various publication attributes correlated with the scientific quality...... of the content and whether this information could be employed to harvest, filter, and rank Web publications. The attributes analyzed were inlinks, outlinks, bibliographic references, file format, language, search engine overlap, structural position (according to site structure), and the occurrence of various...... types of metadata. As could be expected, the ranked output differs between the three search engines. Apparently, this is caused by differences in ranking algorithms rather than the databases themselves. In fact, because scientific Web content in this subject domain receives few inlinks, both Alta...

  12. Scientific Freedom and Human Rights

    Science.gov (United States)

    Munoz, Elisa

    2000-03-01

    As part of her ongoing work monitoring issues at the intersection of science and human rights, Ms. Munoz has highlighted violations of academic freedom in Serbia and Iran, the denial of visas and travel licenses to U.S. and Cuban scientists, interference with scientific freedom in Brazil, Mexico, Russia, and the Ukraine, the use of organs from executed prisoners in China, legislation jeopardizing women's health in Iran, and the closure of centers for the treatment of torture survivors in Turkey. Such violations contravene international human rights principles listed in the Universal Declaration of Human Rights and other international human rights covenants. Ms. Munoz will describe current violations of scientific freedom and the relevant international principles on which these freedoms rest.

  13. Learning scientific programming with Python

    CERN Document Server

    Hill, Christian

    2015-01-01

    Learn to master basic programming tasks from scratch with real-life scientifically relevant examples and solutions drawn from both science and engineering. Students and researchers at all levels are increasingly turning to the powerful Python programming language as an alternative to commercial packages and this fast-paced introduction moves from the basics to advanced concepts in one complete volume, enabling readers to quickly gain proficiency. Beginning with general programming concepts such as loops and functions within the core Python 3 language, and moving onto the NumPy, SciPy and Matplotlib libraries for numerical programming and data visualisation, this textbook also discusses the use of IPython notebooks to build rich-media, shareable documents for scientific analysis. Including a final chapter introducing challenging topics such as floating-point precision and algorithm stability, and with extensive online resources to support advanced study, this textbook represents a targeted package for students...

  14. [Scientific concepts in clinical medicine].

    Science.gov (United States)

    Rogler, G

    2003-11-28

    The understanding of the scientific basis and the theory of knowledge are surprisingly heterogeneous in practical and clinical medicine. It is frequently influenced or based on the philosophical theory of critical rationalism founded by Sir Karl Popper. Because the theory of knowledge and the understanding of scientific truth is the central basis for cautious and good clinical practise it is necessary to discuss both points to avoid unscientific auto-immunisation against critique in a type of medicine that regards herself as science-based. Evidence-based medicine would not be possible without interpretation and explanation of existing data into the individual treatment context. Besides an inductive or deductive logic the historical and situative side-conditions of the gathering of knowledge and of experiments are of central importance for their interpretation and their relevance in clinical practice. This historical and situative context warrants reflection but must also be paid attention to in the reflections on medical ethics.

  15. Scientific and Technological Report 2005

    International Nuclear Information System (INIS)

    Prado Cuba, Antonio; Robles Nique, Anita; Rodriguez R, Juan; Solis Veliz, Jose

    2006-07-01

    This annual scientific and technological report provides an overview of research and development activities at Peruvian Institute of Nuclear Energy (IPEN) during the period from 1 january to 31 december, 2005. This report includes 38 papers divided in 7 subject matters, such as: physics and chemistry, materials science, nuclear engineering, industrial and environmental applications, medical and biological applications, radiation protection and nuclear safety, and management aspects

  16. Tunisian women in scientific research

    Science.gov (United States)

    Jaziri, Sihem

    2013-03-01

    The number of Tunisian women conducting scientific research is comparable to that of countries where educating girls has been going on much longer. Although women play an increasingly important role in the field of research, they rarely hold positions of responsibility. Enormous similarities exist between the degree of integration of Tunisian women in science and technology and that of developed countries. Since independence and the removal of discrimination between girls and boys, Tunisian women have been catching up very quickly.

  17. Scientific and Technological Report 2009

    International Nuclear Information System (INIS)

    Prado Cuba, Antonio; Santiago Contreras, Julio; Lopez Milla, Alcides; Ramos Trujillo, Bertha

    2010-11-01

    This annual scientific and technological report provides an overview of research and development activities at Peruvian Institute of Nuclear Energy (IPEN) during the period from 1 january to 31 december, 2009. This report includes 46 papers divided in 7 subject matters, such as: physics and chemistry, materials science, nuclear engineering, mining industrial and environmental applications, medical and biological applications, radiation protection and nuclear safety, and management aspects. It also includes annexes. (APC)

  18. Scientific and Technological Report 2006

    International Nuclear Information System (INIS)

    Prado Cuba, Antonio; Robles Nique, Anita; Solis Veliz, Jose; Osores Rebaza, Jose

    2007-08-01

    This annual scientific and technological report provides an overview of research and development activities at Peruvian Institute of Nuclear Energy (IPEN) during the period from 1 january to 31 december, 2006. This report includes 54 papers divided in 7 subject matters, such as: physics and chemistry, materials science, nuclear engineering, industrial and environmental applications, medical and biological applications, radiation protection and nuclear safety, and management aspects. (APC)

  19. Scientific and Technological Report 2008

    International Nuclear Information System (INIS)

    Prado Cuba, A.; Santiago Contreras, J.; Rojas Tapia, J.; Ramos Trujillo, B.; Vela Mora, M.; Castro Gamero, E.

    2010-04-01

    This annual scientific and technological report provides an overview of research and development activities at Peruvian Institute of Nuclear Energy (IPEN) during the period from 1 january to 31 december, 2008. This report includes 60 papers divided in 7 subject matters, such as: physics and chemistry, materials science, nuclear engineering, mining industrial and environmental applications, medical and biological applications, radiation protection and nuclear safety, and management aspects. It also includes annexes. (APC)

  20. A Guide to Scientific Crowdfunding.

    Science.gov (United States)

    Vachelard, Julien; Gambarra-Soares, Thaise; Augustini, Gabriela; Riul, Pablo; Maracaja-Coutinho, Vinicius

    2016-02-01

    Crowdfunding represents an attractive new option for funding research projects, especially for students and early-career scientists or in the absence of governmental aid in some countries. The number of successful science-related crowdfunding campaigns is growing, which demonstrates the public's willingness to support and participate in scientific projects. Putting together a crowdfunding campaign is not trivial, however, so here is a guide to help you make yours a success.

  1. A Guide to Scientific Crowdfunding.

    Directory of Open Access Journals (Sweden)

    Julien Vachelard

    2016-02-01

    Full Text Available Crowdfunding represents an attractive new option for funding research projects, especially for students and early-career scientists or in the absence of governmental aid in some countries. The number of successful science-related crowdfunding campaigns is growing, which demonstrates the public's willingness to support and participate in scientific projects. Putting together a crowdfunding campaign is not trivial, however, so here is a guide to help you make yours a success.

  2. NOAA's Scientific Data Stewardship Program

    Science.gov (United States)

    Bates, J. J.

    2004-12-01

    The NOAA mission is to understand and predict changes in the Earth's environment and conserve and manage coastal and marine resources to meet the Nation's economic, social and environmental needs. NOAA has responsibility for long-term archiving of the United States environmental data and has recently integrated several data management functions into a concept called Scientific Data Stewardship. Scientific Data Stewardship a new paradigm in data management consisting of an integrated suite of functions to preserve and exploit the full scientific value of NOAA's, and the world's, environmental data These functions include careful monitoring of observing system performance for long-term applications, the generation of authoritative long-term climate records from multiple observing platforms, and the proper archival of and timely access to data and metadata. NOAA has developed a conceptual framework to implement the functions of scientific data stewardship. This framework has five objectives: 1) develop real-time monitoring of all satellite observing systems for climate applications, 2) process large volumes of satellite data extending up to decades in length to account for systematic errors and to eliminate artifacts in the raw data (referred to as fundamental climate data records, FCDRs), 3) generate retrieved geophysical parameters from the FCDRs (referred to as thematic climate data records TCDRs) including combining observations from all sources, 4) conduct monitoring and research by analyzing data sets to uncover climate trends and to provide evaluation and feedback for steps 2) and 3), and 5) provide archives of metadata, FCDRs, and TCDRs, and facilitate distribution of these data to the user community. The term `climate data record' and related terms, such as climate data set, have been used for some time, but the climate community has yet to settle on a concensus definition. A recent United States National Academy of Sciences report recommends using the

  3. How to write scientific paper

    International Nuclear Information System (INIS)

    Kim, Si Jung

    1977-03-01

    This book introduces the essence of scientific paper, contents of paper, writing of manuscript, as well as research and analysis and arrangement of reference. It shows conditions of paper, kinds of paper, division and arrangement of content, title, author name, table of contents, abstracts, introduction, experimental materials and methods, results, consideration, conclusion, summary, acknowledgements, references. It also covers draft, quotation, footnotes and references, graphs and pictures, importance of literature research, how to find special literature, and analysis and arrangement of literature.

  4. Scientific papers: A new paradigm

    Science.gov (United States)

    Reid, George C.

    The problem of how to organize and write a scientific paper is a very basic one for most of us. A scientific paper is, after all, the only tangible product of a research scientist and, like all products, will be a failure if not marketed properly to reach its potential buyers. I think that a lack of attention to this “marketing and sales” aspect of research is a serious fault in our community, by which I mean those of us who publish in AGU journals.The potential audience for a scientific paper can be divided roughly into three distinct categories. The first group is usually rather small in number, consisting of fellow scientists working in a very closely related field, and to whom the details of the work are of major importance. The second group is also fellow scientists, but their interest is less sharply focused, and they are concerned with the broad outlines of the work and essential results. The third group is the sponsors and the people who actually pay for the work, whose interest in the details is minimal and they, sadly enough, are often concerned only with the fact that a paper has been published rather than its content.

  5. Neophilia Ranking of Scientific Journals.

    Science.gov (United States)

    Packalen, Mikko; Bhattacharya, Jay

    2017-01-01

    The ranking of scientific journals is important because of the signal it sends to scientists about what is considered most vital for scientific progress. Existing ranking systems focus on measuring the influence of a scientific paper (citations)-these rankings do not reward journals for publishing innovative work that builds on new ideas. We propose an alternative ranking based on the proclivity of journals to publish papers that build on new ideas, and we implement this ranking via a text-based analysis of all published biomedical papers dating back to 1946. In addition, we compare our neophilia ranking to citation-based (impact factor) rankings; this comparison shows that the two ranking approaches are distinct. Prior theoretical work suggests an active role for our neophilia index in science policy. Absent an explicit incentive to pursue novel science, scientists underinvest in innovative work because of a coordination problem: for work on a new idea to flourish, many scientists must decide to adopt it in their work. Rankings that are based purely on influence thus do not provide sufficient incentives for publishing innovative work. By contrast, adoption of the neophilia index as part of journal-ranking procedures by funding agencies and university administrators would provide an explicit incentive for journals to publish innovative work and thus help solve the coordination problem by increasing scientists' incentives to pursue innovative work.

  6. Lexical Features of Scientific Discourse

    Directory of Open Access Journals (Sweden)

    Tatjana Rusko

    2014-06-01

    Full Text Available Currently, a lot of emphasis is placed of the ability of a person to successfully communicate in any sphere of activity, which along with upbringing and education is among the factors that determine a person’s culture. In the context of rapid scientific and technological progress, it is vital to constantly exchange relevant infor- mation. The effectiveness of this process relies not only on the proficient knowledge of the subject and the ability to make grammatically correct sentences, but to a large extent on the level of competence in scientific language. The present article attempts to consider the interaction of discourse and vocabulary, different types of cognitive phenomena responsible for the use of a language in real time and related to the language as a means of storing and organising information. Analysing and classifying some key elements of a scientific discourse lexicon contributes to the development of certain provisions of lexicology, functional stylistics, cognitive linguistics and terminology. The results of the analysis may be advantageous both to linguistics and teaching the language for specific purposes.

  7. Ethics of reviewing scientific publications.

    Science.gov (United States)

    Napolitani, Federica; Petrini, Carlo; Garattini, Silvio

    2017-05-01

    The approval or rejection of scientific publications can have important consequences for scientific knowledge, so considerable responsibility lies on those who have to assess or review them. Today it seems that the peer review process, far from being considered an outdated system to be abandoned, is experiencing a new upturn. This article proposes criteria for the conduct of reviewers and of those who select them. While commenting on new emerging models, it provides practical recommendations for improving the peer-review system, like strengthening the role of guidelines and training and supporting reviewers. The process of peer review is changing, it is getting more open and collaborative, but those same ethical principles which guided it from its very origin should remain untouched and be firmly consolidated. The paper highlights how the ethics of reviewing scientific publications is needed now more than ever, in particular with regard to competence, conflict of interest, willingness to discuss decisions, complete transparency and integrity. Copyright © 2016 European Federation of Internal Medicine. Published by Elsevier B.V. All rights reserved.

  8. GBF scientific progress report 1979

    International Nuclear Information System (INIS)

    1980-01-01

    The structure and style of representation of the paragraphs about scientific results are adjusted to the research and development program 1979. Since in this program an arrangement according to fields or departments resp. was chosen, the individual reports of this report on results were arranged as to departments too. In doing so, however, a survey of the aims and the development of the department as a whole precedes, and subsequently information on the results of the individual projects is given. In addition to the results of the year under report, the aims during the life of the project are summarized. Para. 2.1 puts the individual FE (research and development) projects into relation to the five research programs, which are at present dealt with by the GBF (Society for Biotechnological Research). The reports on the individual projects refer to the FE program number. For the first time, the report on the results contains a paragraph about the collecting activity and the research work of the DSM (German collection of microorganisms), which became part of the GBF at the beginning of the year under report. A separate paragraph deals with the scientific and technical infrastructure, especially with the work of the Service-Unit 'Biotechnikum' which produces natural substances, which are commercially not available. Paragraphs about further activities in the fields of scientific cooperation, results transfer etc, as well as about the staff and the economical developments of the GBF follow. (orig./AJ) [de

  9. CERN Library - Scientific journal cancellations

    CERN Multimedia

    2004-01-01

    Due to the constant increase of the subscription costs of scientific journals and the current budget restrictions, the Scientific Information Policy Board has mandated the Working Group for Acquisitions (WGA) together with the Library to propose a list of titles to be cancelled at the end of 2004. As a first step, the WGA has identified the scientific journals listed at the web site below as candidates for cancellation. The choice has been guided by the personal experience of the WGA members, consultation of other expert CERN staff for highly specialized titles, and by criteria such as subscription price, impact factor, and - where available - access statistics for electronic journals. The list also accounts for the fact that many titles are subscribed to in 'packages' such that a cancellation of individual titles would not lead to any cost savings. We invite users to carefully check the list on the Library homepage (http://library.cern.ch/). If you find any title that you consider critically important for y...

  10. The craft of scientific writing

    CERN Document Server

    Alley, Michael

    1996-01-01

    Designed to help both professional and student scientists and engineers write clearly and effectively, this text approaches the subject in a fresh way. Using scores of examples from a wide variety of authors and disciplines, the author - himself a writer and physicist -- demonstrates the difference between strong and weak scientific writing, and how to convey ideas to the intended audience. In addition, he gives advice on how to start writing, and how to revise drafts, including many suggestions about approaching a wide variety of tasks - from laboratory reports to grant proposals, from internal communications to press releases - as well as a concise guide to appropriate style and usage.

  11. Scientific activities 1977 and 1978

    International Nuclear Information System (INIS)

    1980-01-01

    The scientific activities and achievements of the Nuclear Research Center Democritus for the years 1977 and 1978 are presented in the form of a list of 79 projects giving title, objectives, commencement year, responsible of each project and the pertaining lists of publications. The 14 chapters of this work cover the activities of the main Divisions of the Democritus NRC: Exploration of Radioactive Minerals, Computer Center, Environmental Radioactivity, Chemistry, Physics, Biology, Soil Science, Electronics, Reactor, Health Physics, Radioisotopes, Technological Applications and Medical Service. (T.A.)

  12. Quantum chemistry and scientific calculus

    International Nuclear Information System (INIS)

    Gervais, H.P.

    1988-01-01

    The 1988 progress report of the Polytechnic School research team, concerning the quantum chemistry and the scientific calculus. The research program involves the following topics: the transition metals - carbon monoxide systems, which are a suitable model for the chemisorption phenomena; the introduction of the vibronic perturbations in the magnetic screen constants; the gauge invariance method (used in the calculation of the magnetic perturbations), extended to the case of the static or dynamic electrical polarizabilities. The published papers, the congress communications and the thesis are listed [fr

  13. Scientific Investigation with the SJCSI

    Science.gov (United States)

    Berbey, E.; Delpeyroux, G.; Douay, E.; Juchereau, C.; Garavet, O.

    2012-04-01

    Scientific Investigation with the SJCSI (Saint Jean* Crime Scene Investigation) Our work, which we have been teaching for 3 years, consists of a scientific investigation. We create a case from A to Z and then our students (15 to 16 years old) are meant to collect samples and clues from a reconstituted crime scene and then have to catch the culprit thanks to laboratory tests crossing four subjects: Physics and Chemistry, Biology, Math and English. I'm a biology teacher and I work with 3 other teachers in my school. The objectives of these activities are: • Make sciences more attractive by putting them into a context of crime investigation. • Use science techniques to find a culprit or to clear a suspect. • To acquire scientific knowledge. • Realize that the different scientific subjects complement each other to carry out a survey. • Use English language and improve it. The investigation consists of doing experiments after collecting different samples and clues on the crime scene. Examples of Biology experimentation: • Detecting the origin of the blood samples found on the crime scene. Students observe blood samples with a microscope and compare the characteristics to those of human blood found on the web. They discover that blood samples found aren't human blood because the red cells have a nucleus. By using the information given in the scenario, they discover that blood sample belongs to the parrot of a suspect. Students, also take a photo of their microscopic preparations, add title and caption and so they learn the cell's structure and the characteristics of blood cells. • In another case, students have to study the blood sample found under the victims fingernails. They observe blood preparation and compare it to the blood of a suspect who has a genetic disease: drepanocytosis. So, they discover the characteristics of blood cells by comparing them to sickle cells. • DNA electrophoresis to identify DNA found, for example, on the gun. • Blood type

  14. Scientific Workflow Management in Proteomics

    Science.gov (United States)

    de Bruin, Jeroen S.; Deelder, André M.; Palmblad, Magnus

    2012-01-01

    Data processing in proteomics can be a challenging endeavor, requiring extensive knowledge of many different software packages, all with different algorithms, data format requirements, and user interfaces. In this article we describe the integration of a number of existing programs and tools in Taverna Workbench, a scientific workflow manager currently being developed in the bioinformatics community. We demonstrate how a workflow manager provides a single, visually clear and intuitive interface to complex data analysis tasks in proteomics, from raw mass spectrometry data to protein identifications and beyond. PMID:22411703

  15. Surgical Skills Beyond Scientific Management.

    Science.gov (United States)

    Whitfield, Nicholas

    2015-07-01

    During the Great War, the French surgeon Alexis Carrel, in collaboration with the English chemist Henry Dakin, devised an antiseptic treatment for infected wounds. This paper focuses on Carrel's attempt to standardise knowledge of infected wounds and their treatment, and looks closely at the vision of surgical skill he espoused and its difference from those associated with the doctrines of scientific management. Examining contemporary claims that the Carrel-Dakin method increased rather than diminished demands on surgical work, this paper further shows how debates about antiseptic wound treatment opened up a critical space for considering the nature of skill as a vital dynamic in surgical innovation and practice.

  16. Quantifying the Ease of Scientific Discovery.

    Science.gov (United States)

    Arbesman, Samuel

    2011-02-01

    It has long been known that scientific output proceeds on an exponential increase, or more properly, a logistic growth curve. The interplay between effort and discovery is clear, and the nature of the functional form has been thought to be due to many changes in the scientific process over time. Here I show a quantitative method for examining the ease of scientific progress, another necessary component in understanding scientific discovery. Using examples from three different scientific disciplines - mammalian species, chemical elements, and minor planets - I find the ease of discovery to conform to an exponential decay. In addition, I show how the pace of scientific discovery can be best understood as the outcome of both scientific output and ease of discovery. A quantitative study of the ease of scientific discovery in the aggregate, such as done here, has the potential to provide a great deal of insight into both the nature of future discoveries and the technical processes behind discoveries in science.

  17. General outline of scientific programme for 1971

    CERN Multimedia

    1971-01-01

    A description of the 1971 scientific and technical programme at CERN was prepared for the Scientific Policy Committee and was used to accompany the budget document. The opening chapter is reproduced here with a few minor modifications.

  18. Queen's discovery lauded by top scientific journal

    CERN Multimedia

    McGrady, S

    2002-01-01

    A scientific breakthrough at Queen's University's Sudbury Neutrino Observatory has received major international recognition. The journal Science ranked the discovery that cracked the "neutrino problem" second, in the journal's top 10 scientific achievements of 2002 (1/2 page).

  19. Preventing statistical errors in scientific journals.

    NARCIS (Netherlands)

    Nuijten, M.B.

    2016-01-01

    There is evidence for a high prevalence of statistical reporting errors in psychology and other scientific fields. These errors display a systematic preference for statistically significant results, distorting the scientific literature. There are several possible causes for this systematic error

  20. Scientific perspectives on music therapy.

    Science.gov (United States)

    Hillecke, Thomas; Nickel, Anne; Bolay, Hans Volker

    2005-12-01

    What needs to be done on the long road to evidence-based music therapy? First of all, an adequate research strategy is required. For this purpose the general methodology for therapy research should be adopted. Additionally, music therapy needs a variety of methods of allied fields to contribute scientific findings, including mathematics, natural sciences, behavioral and social sciences, as well as the arts. Pluralism seems necessary as well as inevitable. At least two major research problems can be identified, however, that make the path stony: the problem of specificity and the problem of eclecticism. Neuroscientific research in music is giving rise to new ideas, perspectives, and methods; they seem to be promising prospects for a possible contribution to a theoretical and empirical scientific foundation for music therapy. Despite the huge heterogeneity of theoretical approaches in music therapy, an integrative model of working ingredients in music therapy is useful as a starting point for empirical studies in order to question what specifically works in music therapy. For this purpose, a heuristic model, consisting of five music therapy working factors (attention modulation, emotion modulation, cognition modulation, behavior modulation, and communication modulation) has been developed by the Center for Music Therapy Research (Viktor Dulger Institute) in Heidelberg. Evidence shows the effectiveness of music therapy for treating certain diseases, but the question of what it is in music therapy that works remains largely unanswered. The authors conclude with some questions to neuroscientists, which we hope may help elucidate relevant aspects of a possible link between the two disciplines.

  1. Choosing ESRO's first scientific satellites

    Science.gov (United States)

    Russo, Arturo

    1992-11-01

    The choice of the scientific payloads of the European Space Research Organization's (ESRO's) first generation of satellites is analyzed. Concentration is on those aspects of the decision process that involved more directly the scientific community and that emerged as major issues in the discussion of the Launching Program Advisory Committee (LPAC). The main theme was the growing competition between the various fields of space science within the progressive retrenching of the Organization's financial resources available for the satellite program. A general overview of the status of the program by the end of 1966 is presented. The choice of the first small satellites' payloads (ESRO 1 and 2, and HEOS-A) and the difficult definition of the TD satellite program are discussed. This part covers a time span going from early 1963 to the spring of 1966. In the second part, the narrative starts from the spring of 1967, when the decision to recommend a second HEOS-type satellite was taken, and then analyzes the complex situation determined by the crisis of the TD program in 1968, and the debates which eventually led to the abandonment of TD-2 and the start of the far less ambitious ESRO 5 project.

  2. The scaling issue: scientific opportunities

    Science.gov (United States)

    Orbach, Raymond L.

    2009-07-01

    A brief history of the Leadership Computing Facility (LCF) initiative is presented, along with the importance of SciDAC to the initiative. The initiative led to the initiation of the Innovative and Novel Computational Impact on Theory and Experiment program (INCITE), open to all researchers in the US and abroad, and based solely on scientific merit through peer review, awarding sizeable allocations (typically millions of processor-hours per project). The development of the nation's LCFs has enabled available INCITE processor-hours to double roughly every eight months since its inception in 2004. The 'top ten' LCF accomplishments in 2009 illustrate the breadth of the scientific program, while the 75 million processor hours allocated to American business since 2006 highlight INCITE contributions to US competitiveness. The extrapolation of INCITE processor hours into the future brings new possibilities for many 'classic' scaling problems. Complex systems and atomic displacements to cracks are but two examples. However, even with increasing computational speeds, the development of theory, numerical representations, algorithms, and efficient implementation are required for substantial success, exhibiting the crucial role that SciDAC will play.

  3. The scaling issue: scientific opportunities

    International Nuclear Information System (INIS)

    Orbach, Raymond L

    2009-01-01

    A brief history of the Leadership Computing Facility (LCF) initiative is presented, along with the importance of SciDAC to the initiative. The initiative led to the initiation of the Innovative and Novel Computational Impact on Theory and Experiment program (INCITE), open to all researchers in the US and abroad, and based solely on scientific merit through peer review, awarding sizeable allocations (typically millions of processor-hours per project). The development of the nation's LCFs has enabled available INCITE processor-hours to double roughly every eight months since its inception in 2004. The 'top ten' LCF accomplishments in 2009 illustrate the breadth of the scientific program, while the 75 million processor hours allocated to American business since 2006 highlight INCITE contributions to US competitiveness. The extrapolation of INCITE processor hours into the future brings new possibilities for many 'classic' scaling problems. Complex systems and atomic displacements to cracks are but two examples. However, even with increasing computational speeds, the development of theory, numerical representations, algorithms, and efficient implementation are required for substantial success, exhibiting the crucial role that SciDAC will play.

  4. Scientific progress at Yucca Mountain

    International Nuclear Information System (INIS)

    Gertz, C.P.

    1990-01-01

    The US Department of Energy (DOE) is moving forward with studies to determine whether Yucca Mountain, Nevada, would be a suitable site for the nation's first high-level radioactive waste repository; however, the DOE's Congressionally mandated task of characterizing the site has been severely delayed by a lack of cooperation from the state of Nevada. The state has refused to issue the appropriate permits that must be obtained before surface disturbing studies can proceed; therefore, an extensive surface-based drilling and trenching program and construction of underground exploration facilities are on hold until pending litigation between the DOE and Nevada has been resolved. Despite this major impasse, significant scientific progress has been made, and the DOE is aggressively pursuing investigations that can be conducted without the state-issued permits. Additionally, the DOE is developing a high-quality technical and management structure as well as equipment, plans, and quality assurance procedures, so that the scientific investigation program can proceed without delay once the appropriate permits are obtained

  5. Scientific issues in fuel behaviour

    International Nuclear Information System (INIS)

    1995-01-01

    The current limits on discharge burnup in today's nuclear power stations have proven the fuel to be very reliable in its performance, with a negligibly small rate of failure. However, for reasons of economy, there are moves to increase the fuel enrichment in order to extend both the cycle time and the discharge burnup. But, longer periods of irradiation cause increased microstructural changes in the fuel and cladding, implying a larger degradation of physical and mechanical properties. This degradation may well limit the plant life, hence the NSC concluded that it is of importance to develop a predictive capability of fuel behaviour at extended burnup. This can only be achieved through an improved understanding of the basic underlying phenomena of fuel behaviour. The Task Force on Scientific Issues Related to Fuel Behaviour of the NEA Nuclear Science Committee has identified the most important scientific issues on the subject and has assigned priorities. Modelling aspects are listed in Appendix A and discussed in Part II. In addition, quality assurance process for performing and evaluating new integral experiments is considered of special importance. Main activities on fuel behaviour modelling, as carried out in OECD Member countries and international organisations, are listed in Part III. The aim is to identify common interests, to establish current coverage of selected issues, and to avoid any duplication of efforts between international agencies. (author). refs., figs., tabs

  6. Scientific report 1996-1997

    International Nuclear Information System (INIS)

    1998-01-01

    A general introduction gives a summary of the present scientific program of the SPEC and presents some of the recent highlights, the organization, the recent evolution and the relationship of the laboratory with the CEA and the scientific community. Most of the information on the organization is gathered at the end of the report in a section called 'Facts and Figures'. The central part consists in 20 chapters which can be divided in 4 subsets corresponding to the contributions of the four laboratories of the SPEC. In front of each of these subsets, an inset gives a summary of the respective contributions. The distribution is as follows: Chapter 1 - 4: Soft matter, interfaces and turbulence. Chapter 5 - 11: Solid state and novel materials. Chapter 12 - 16 : Quantum condensed matter. Chapter 17 - 20: Condensed matter theory. The headings of each chapter list the physicists, technicians, PhD students as well as the visitors and main collaborators which have taken part in the corresponding activities. In most cases, graduate students were involved in some of the work during their training period. Their names can be found in the section Facts and Figures (subsection Teaching and Training). The Index lists all the contributors and gives the page numbers at which their names appear. (authors)

  7. SCWEB, Scientific Workstation Evaluation Benchmark

    Energy Technology Data Exchange (ETDEWEB)

    Raffenetti, R C [Computing Services-Support Services Division, Argonne National Laboratory, 9700 South Cass Avenue, Argonne, Illinois 60439 (United States)

    1988-06-16

    1 - Description of program or function: The SCWEB (Scientific Workstation Evaluation Benchmark) software includes 16 programs which are executed in a well-defined scenario to measure the following performance capabilities of a scientific workstation: implementation of FORTRAN77, processor speed, memory management, disk I/O, monitor (or display) output, scheduling of processing (multiprocessing), and scheduling of print tasks (spooling). 2 - Method of solution: The benchmark programs are: DK1, DK2, and DK3, which do Fourier series fitting based on spline techniques; JC1, which checks the FORTRAN function routines which produce numerical results; JD1 and JD2, which solve dense systems of linear equations in double- and single-precision, respectively; JD3 and JD4, which perform matrix multiplication in single- and double-precision, respectively; RB1, RB2, and RB3, which perform substantial amounts of I/O processing on files other than the input and output files; RR1, which does intense single-precision floating-point multiplication in a tight loop, RR2, which initializes a 512x512 integer matrix in a manner which skips around in the address space rather than initializing each consecutive memory cell in turn; RR3, which writes alternating text buffers to the output file; RR4, which evaluates the timer routines and demonstrates that they conform to the specification; and RR5, which determines whether the workstation is capable of executing a 4-megabyte program

  8. [On freedom of scientific research].

    Science.gov (United States)

    Folkers, G

    2013-07-01

    Debates about science and, more specifically, about scientific research quickly bring up the question about its freedom. Science is readily blamed for technological disasters or criticized for nursing fantasies of omnipotence and commercial gain. This prompts the call for a restriction of its freedom. At the same time, society's demands on science are enormous, to the effect that science and technology have acquired the status of a deus-ex-machina: they are expected to furnish short-term, affordable, and convenient solutions to a wide range of problems, including issues of health, transportation, food and, more generally, a comfortable life. What kind of freedom is required to meet these expectations? Who is in a position to grant it? What does freedom for science mean and how is it linked to responsibility? The paper examines the current situation of freedom in scientific research and of its restrictions, many of which are mentally or economically conditioned. It calls for the involvement of an informed, self-confident bourgeoisie in research decisions and for the educational measures this necessitates. Finally, it demands a greater appreciation of education (rather than training) as the basis of social trust, and the recognition of continuous education as a productive investment of time and a crucial element in the employment of social goods.

  9. Methods of Scientific Research: Teaching Scientific Creativity at Scale

    Science.gov (United States)

    Robbins, Dennis; Ford, K. E. Saavik

    2016-01-01

    We present a scaling-up plan for AstroComNYC's Methods of Scientific Research (MSR), a course designed to improve undergraduate students' understanding of science practices. The course format and goals, notably the open-ended, hands-on, investigative nature of the curriculum are reviewed. We discuss how the course's interactive pedagogical techniques empower students to learn creativity within the context of experimental design and control of variables thinking. To date the course has been offered to a limited numbers of students in specific programs. The goals of broadly implementing MSR is to reach more students and early in their education—with the specific purpose of supporting and improving retention of students pursuing STEM careers. However, we also discuss challenges in preserving the effectiveness of the teaching and learning experience at scale.

  10. Principal scientific and technical results. Scientific report 1994

    International Nuclear Information System (INIS)

    1995-01-01

    On January, 1, 1994, the French Bureau de Recherches Geologiques et Minieres has developed a new organization to carry out its scientific research in applied geosciences. With the exception of cartography and geologic synthesis which are dependent on the Direction of the National Geologic Service, a research management has been created with 90 engineers-searchers and 20 technicians for the execution of the research program. This report comprises two parts. The first part is a summary of the objectives and principal results for each research project of 1994, and the second part is a more detailed presentation of the main results for about a third of the projects. (J.S.). 568 refs., 54 figs., 2 tabs., 3 photos

  11. Motivating Scientific Research and Development: | Ononogbu | Bio ...

    African Journals Online (AJOL)

    Scientific research is an important aspect of the function of a university lecturer. It is how he/she carries out this function that determines his/her relevance in the university system and indeed in the scientific community as a whole. Scientific research or investigation may be divided into four sections: mental exercise, ...

  12. Scientific Communication and the Nature of Science

    Science.gov (United States)

    Nielsen, Kristian H.

    2013-01-01

    Communication is an important part of scientific practice and, arguably, may be seen as constitutive to scientific knowledge. Yet, often scientific communication gets cursory treatment in science studies as well as in science education. In Nature of Science (NOS), for example, communication is rarely mentioned explicitly, even though, as will be…

  13. RF system modeling and controller design for the European XFEL

    International Nuclear Information System (INIS)

    Schmidt, Christian

    2011-06-01

    The European XFEL is being constructed at the Deutsche Elektronen Synchrotron DESY to generate intense, ultrashort pulses of highly coherent and monochromatic X-Rays for material science research. X-ray flashes are generated by accelerating electron bunches within superconducting cavities with radio frequency (RF) fields to energies up to 17.5 GeV. The digital control of these fields requires extremely high quality in order to achieve the physical processes of photon generation. DESY offers with FLASH a pilot test facility, allowing to test and develop most necessary components, even before the XFEL is conducted. Current field control is based on a proportional feedback controller in addition to a constant feedforward drive, which do not meet the high requirements of the XFEL. This thesis shows that a model based controller design can achieve the necessary field regulation requirements. A linear, time invariant ''black box model'' is estimated, which characterizes the essential dynamic behavior. This model is not based on physical assumptions, but describes exclusively the transfer behavior of the plant. The acceleration modules are operated in a pulsed mode, in which the RF field must be kept constant for a finite period. The character of the disturbances and variations from pulse-to-pulse, together with the properties of the system, require a combination of controlled feedforward drive and feedback. Generally unpredictable, low frequency pulse-to-pulse variations are suppressed by the feedback controller. The structural design of the complex multivariable feedback controller is given, which constrains the model based design approach to assign the controller parameters only. Estimation of the parameters, which can not be tuned manually, is done by the method of H loop shaping which is often applied in modern control theory. However, disturbances within a pulse are in a high frequency range concerning the short pulse duration. They are not sufficiently suppressed

  14. RF system modeling and controller design for the European XFEL

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, Christian

    2011-06-15

    The European XFEL is being constructed at the Deutsche Elektronen Synchrotron DESY to generate intense, ultrashort pulses of highly coherent and monochromatic X-Rays for material science research. X-ray flashes are generated by accelerating electron bunches within superconducting cavities with radio frequency (RF) fields to energies up to 17.5 GeV. The digital control of these fields requires extremely high quality in order to achieve the physical processes of photon generation. DESY offers with FLASH a pilot test facility, allowing to test and develop most necessary components, even before the XFEL is conducted. Current field control is based on a proportional feedback controller in addition to a constant feedforward drive, which do not meet the high requirements of the XFEL. This thesis shows that a model based controller design can achieve the necessary field regulation requirements. A linear, time invariant ''black box model'' is estimated, which characterizes the essential dynamic behavior. This model is not based on physical assumptions, but describes exclusively the transfer behavior of the plant. The acceleration modules are operated in a pulsed mode, in which the RF field must be kept constant for a finite period. The character of the disturbances and variations from pulse-to-pulse, together with the properties of the system, require a combination of controlled feedforward drive and feedback. Generally unpredictable, low frequency pulse-to-pulse variations are suppressed by the feedback controller. The structural design of the complex multivariable feedback controller is given, which constrains the model based design approach to assign the controller parameters only. Estimation of the parameters, which can not be tuned manually, is done by the method of H{sub {infinity}} loop shaping which is often applied in modern control theory. However, disturbances within a pulse are in a high frequency range concerning the short pulse duration

  15. ELFE{alpha}DESY: an electron laboratory for Europe at DESY

    Energy Technology Data Exchange (ETDEWEB)

    Frois, B.; Brinkmann, R.; Kose, R.; Maidment, J.; Bruinsma, P.; Wu, Y.; Conto, J.M. de; Faure, J.; Gentner, M.; Husmann, D.; Tazzioli, F.

    1997-12-01

    ELFE is a project to develop a 15 to 30 GeV, high luminosity, continuous beam electron accelerator for scattering experiments from fixed nuclear targets. The goal is to explore the quark and gluon structure of matter by exclusive and semi-exclusive electron scattering from nuclei. The idea of integrating ELFE into TESLA facility is based on the fact that the superconducting linac is operated at a low duty cycle, about 0.4%, for the electron-positron collider mode and the machine is available for other tasks during the time between collider pulses. A fraction of the beam pulses produced by TESLA could be injected into the HERA ring until the ring is filled. The authors show that it is possible to extract the electrons from HERA used as a stretcher ring and produce a high luminosity quasi continuous beam suitable for nuclear physics experiments. The performances of the extracted beam in term of emittance, energy spread and duty factor have been evaluated. (N.T.).

  16. Worldwide Market For Scientific Lasers

    Science.gov (United States)

    Westra, Sicco

    1989-06-01

    I'm going to talk about the worldwide market for scientific lasers. I felt we should start with a quote from our soon-to-be President and learn from him how he feels about the commitment that the government should make to R&D. "R&D is the economic Fountain of Youth, and we really should take good care of it because that is where our business is for the future." If you read through that quote, it is very clear that at least before the election, he made a very strong commitment to this. It will be interesting to see over the next four years whether he keeps to that commitment or not, but I happen to totally agree with what he is saying here. The R&D market, as I see it, is certainly, as far as lasers are concerned, the growth place for new technology and applications.

  17. Petronas: research and scientific services

    International Nuclear Information System (INIS)

    1995-01-01

    Petroleum is one of Malaysia's major commodities. In 1993 alone, Malaysia exported about 21 million tonne crude petroleum and 3.4 million tonne of petroleum products with export value of about RM 9.2 billion. Despite the large local and export market of the fuel, our petroleum industry is facing several difficulties. The supply of petrol will inevitably deplete. The industry faces an increase in the exploration costs and decline in the discovery of large reserves. Petronas research and scientific services Sdn Bhd was established 3 years ago. The company which supports its holding company's needs in R and D started its history as an analytical laboratory in 1978. Today, it is one of the leading upstream and downstream petroleum research institute in this region

  18. Scientific Computing in Electrical Engineering

    CERN Document Server

    Amrhein, Wolfgang; Zulehner, Walter

    2018-01-01

    This collection of selected papers presented at the 11th International Conference on Scientific Computing in Electrical Engineering (SCEE), held in St. Wolfgang, Austria, in 2016, showcases the state of the art in SCEE. The aim of the SCEE 2016 conference was to bring together scientists from academia and industry, mathematicians, electrical engineers, computer scientists, and physicists, and to promote intensive discussions on industrially relevant mathematical problems, with an emphasis on the modeling and numerical simulation of electronic circuits and devices, electromagnetic fields, and coupled problems. The focus in methodology was on model order reduction and uncertainty quantification. This extensive reference work is divided into six parts: Computational Electromagnetics, Circuit and Device Modeling and Simulation, Coupled Problems and Multi‐Scale Approaches in Space and Time, Mathematical and Computational Methods Including Uncertainty Quantification, Model Order Reduction, and Industrial Applicat...

  19. Scientific literacy in hospital workers

    International Nuclear Information System (INIS)

    Guerci, Alba M.; Pinero, Adalberto; Zubiria, M. Guillermina; Sanz, Vanesa; Larragueta, Nicolas; Puntigliano, Diego

    2008-01-01

    Full text: Previous studies realized by our group have demonstrated radio-induction of genotoxic damage in peripheral blood of hospital workers exposed to chronic X-ray. The cytogenetic and cytomolecular damage was significant in the radiologists evaluated. Accordingly, we have researched the knowledge of risk radiation in 57 workers to different health centres, private and public, in La Plata city. Most of respondents (96.4%) answered to know the risk of working with radiation ionizing, but a large portion do not carry out with the appropriate safety rules. The workers have not interest in this rules, it is evidenced by negligence in the use of protective clothing and personal dosimeters. These results suggested that individuals could be sensitising to minimize their risk. For this purpose we are working in scientific literacy conferences which are organized by 'Asociacion de Tecnicos Radiologos y de Diagnostico por Imagenes de La Plata (ASTEDIRLP)'. (author)

  20. CERN Scientific Book Fair 2008

    CERN Multimedia

    DSU Unit

    2008-01-01

    The CERN Bookshop and CERN Library invite you to attend the 2008 CERN Book Fair 2008, a three-day scientific book festival offering you the opportunity to meet key publishers and electronic book suppliers and to browse and purchase books at significant discounts. Some ten companies will be participating and will bring with them a selection of titles in physics, technology, mathematics, engineering and popular science. There will also be a number of tie-in events intended to give you an insight into the writing and publishing process from authors within our own community. Come along and meet the authors, discuss your book ideas with the publishers’ representatives or simply browse the books on offer. The Fair will take place in Building 500 in the area near the Main Auditorium, and special presentations (as detailed below) will be held in rooms nearby or in the Library. Participating publishers and book traders include: Cambridge ...

  1. Scientific and educational recommender systems

    Science.gov (United States)

    Guseva, A. I.; Kireev, V. S.; Bochkarev, P. V.; Kuznetsov, I. A.; Philippov, S. A.

    2017-01-01

    This article discusses the questions associated with the use of reference systems in the preparation of graduates in physical function. The objective of this research is creation of model of recommender system user from the sphere of science and education. The detailed review of current scientific and social network for scientists and the problem of constructing recommender systems in this area. The result of this study is to research user information model systems. The model is presented in two versions: the full one - in the form of a semantic network, and short - in a relational form. The relational model is the projection in the form of semantic network, taking into account the restrictions on the amount of bonds that characterize the number of information items (research results), which interact with the system user.

  2. Surviving Scientific Academia . . . and Beyond

    Energy Technology Data Exchange (ETDEWEB)

    Conlin, Jeremy Lloyd [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-02-03

    It's been 16 years since I first took a physics class at Weber State University. Since them, I've survived graduate school in Nuclear Engineering, and a postdoc appointment doing nuclear nonproliferation. Now I'm a Technical Staff Member at Los Alamos National Laboratory working with nuclear data, the physics behind the numerical simulations of nuclear reactors and nuclear weapons. Along the way, I've learned a few things. First, scientific computing is everywhere in science. If you are not writing codes, you will be analyzing their output, and generally there will be more output than a human can correctly and accurately interpret in a timely manner. Second, a career in science or engineering can be very rewarding with opportunities to collaborate with and generate friendships with very bright people from all over the world.

  3. Helping to expand scientific knowledge

    International Nuclear Information System (INIS)

    1969-01-01

    Nuclear research has spread rapidly across practically all of the established sciences. It has been a dynamic and creative process in which the Agency has been able to play a constructive role. One of the methods has been the programme of research contracts. This has provided financial support for research involving some form of nuclear technology to physicists, chemists, medical doctors, hydrologists, entomologists, geneticists and scientists in many other disciplines. It is a system almost unique within the United Nations family, though the World Health Organization (WHO) also supports medical research under contract. An examination of the programme and its catalysing and co-ordinating effects in the expansion of scientific knowledge is made here by Clarence O'Neal, of the Division of Research and Laboratories. (author)

  4. Superphenix: technical and scientific achievements

    International Nuclear Information System (INIS)

    Guidez, Joel; Prele, Gerard

    2016-04-01

    In this book, the authors propose a synthesis of technical and scientific achievements related to the design, fabrication and eleven-year operation of Superphenix, the most powerful fast breeder reactor ever built and operated. They had the opportunity to use various and important archives maintained by the different involved institutions, actors and companies, such as the CEA with its MADONA database, AREVA and EDF. They address all the different fields: construction, chemistry, exploitation, handling, small and large components, materials, fuel manufacturing, environmental assessment, thermal hydraulics, the sodium-water reaction, sodium fires, the release of residual power, in-service inspection, and dismantling operations. Moreover, a chapter addresses design studies for Superphenix 2 and for the European Fast Reactor (EFR) which should be the successors of Superphenix

  5. Atypical combinations and scientific impact.

    Science.gov (United States)

    Uzzi, Brian; Mukherjee, Satyam; Stringer, Michael; Jones, Ben

    2013-10-25

    Novelty is an essential feature of creative ideas, yet the building blocks of new ideas are often embodied in existing knowledge. From this perspective, balancing atypical knowledge with conventional knowledge may be critical to the link between innovativeness and impact. Our analysis of 17.9 million papers spanning all scientific fields suggests that science follows a nearly universal pattern: The highest-impact science is primarily grounded in exceptionally conventional combinations of prior work yet simultaneously features an intrusion of unusual combinations. Papers of this type were twice as likely to be highly cited works. Novel combinations of prior work are rare, yet teams are 37.7% more likely than solo authors to insert novel combinations into familiar knowledge domains.

  6. Scientific inference learning from data

    CERN Document Server

    Vaughan, Simon

    2013-01-01

    Providing the knowledge and practical experience to begin analysing scientific data, this book is ideal for physical sciences students wishing to improve their data handling skills. The book focuses on explaining and developing the practice and understanding of basic statistical analysis, concentrating on a few core ideas, such as the visual display of information, modelling using the likelihood function, and simulating random data. Key concepts are developed through a combination of graphical explanations, worked examples, example computer code and case studies using real data. Students will develop an understanding of the ideas behind statistical methods and gain experience in applying them in practice. Further resources are available at www.cambridge.org/9781107607590, including data files for the case studies so students can practise analysing data, and exercises to test students' understanding.

  7. Phase I Final Scientific Report

    Energy Technology Data Exchange (ETDEWEB)

    Lu, Xijia [National Energy Technology Lab. (NETL), Albany, OR (United States); Fetvedt, Jeremy [National Energy Technology Lab. (NETL), Albany, OR (United States); Dimmig, Walker [National Energy Technology Lab. (NETL), Albany, OR (United States)

    2017-10-15

    This Final Scientific Report addresses the accomplishments achieved during Phase I of DE- FE0023985, Coal Syngas Combustor Development for Supercritical CO2 Power Cycles. The primary objective of the project was to develop a coal syngas-fueled combustor design for use with high-pressure, high-temperature, oxy-fuel, supercritical CO2 power cycles, with particular focus given to the conditions required by the Allam Cycle. The primary goals, from the Statement of Project Objectives, were to develop: (1) a conceptual design of a syngas-fueled combustor-turbine block for a 300MWe high-pressure, oxy-fuel, sCO2 power plant; (2) the preliminary design of a 5MWt test combustor; and (3) the definition of a combustor test program. Accomplishments for each of these goals are discussed in this report.

  8. The martial art of scientific publication

    Science.gov (United States)

    Parker, E. N.

    Publication of scientific results in refereed journals is an essential part of the scientific process. It is the final payoff for the obscure labors that compose scientific research. Unfortunately, effective operation of the publication procedure requires simultaneous rational scientific judgment on the part of the author, the referee, and the editor, and the coincidence of all of these cannot be taken for granted on every given occasion. There are times when the working definition of truth is taken to be the consensus of one's scientific intimates: the “good old boys.” Anything outside that limited horizon is discomforting and improper and is to be barred from consideration.

  9. Scientific Facts and Methods in Public Reason

    DEFF Research Database (Denmark)

    Jønch-Clausen, Karin; Kappel, Klemens

    2016-01-01

    Should scientific facts and methods have an epistemically privileged status in public reason? In Rawls’s public reason account he asserts what we will label the Scientific Standard Stricture: citizens engaged in public reason must be guided by non-controversial scientific methods, and public reason...... must be in line with non-controversial scientific conclusions. The Scientific Standard Stricture is meant to fulfill important tasks such as enabling the determinateness and publicity of the public reason framework. However, Rawls leaves us without elucidation with regard to when science...

  10. Can scientific medicine incorporate alternative medicine?

    Science.gov (United States)

    Federspil, G; Vettor, R

    2000-06-01

    The authors examine the problem of defining alternative medicine, and after a brief analysis conclude that a satisfactory unifying definition of the different practices is not possible. Scientific knowledge is a function of scientific method. In turn the principle of falsifiability proposed by Karl Popper is used as a demarcation line between science and pseudoscience. They assert that the various alternative modalities do not represent authentic scientific disciplines, as they lack many of the minimum requirements of scientific discourse and, above all, because they violate the principle of falsifiability. Until they overcome these methodological shortcomings, alternative medical practices cannot become authentic scientific disciplines.

  11. Access to the scientific literature

    Science.gov (United States)

    Albarède, Francis

    The Public Library of Science Open Letter (http://www.publiclibraryofscience.org) is a very generous initiative, but, as most similar initiatives since the advent of electronic publishing, it misses the critical aspects of electronic publishing.Ten years ago, a Publisher would be in charge of running a system called a “scientific journal.” In such a system, the presence of an Editor and peer Reviewers secures the strength of the science and the rigor of writing; the Publisher guarantees the professional quality of printing, efficient dissemination, and long-term archiving. Publishing used to be in everyone's best interest, or nearly everyone. The Publisher, because he/she is financially motivated, ensures widespread dissemination of the journal amongst libraries and individual subscribers. The interest of the Author is that the system guarantees a broad potential readership. The interest of the Reader is that a line is drawn between professionally edited literature, presumably of better quality, and gray literature or home publishing, so that he/she does not waste time going through ‘low yield’ ungraded information. The Publisher could either be a private company, an academic institution, or a scholarly society. My experience is that, when page charges and subscription rates are compounded, journals published by scholarly societies are not necessarily cheaper. The difference between these cases is not the cost of running an office with rents, wages, printing, postage, advertisement, and archiving, but that a private Publisher pays shareholders. Shareholders have the bad habit of minding their own business and, therefore, they may interfere negatively with scientific publishing. Nevertheless, while the stranglehold imposed by private Publishers on our libraries over the last 10 years by increasing subscription rates may in part be due to shareholders' greed, this is true only in part. The increases are also a consequence of the booming number of pages being

  12. Open access to scientific publishing

    Directory of Open Access Journals (Sweden)

    Janne Beate Reitan

    2016-12-01

    Full Text Available Interest in open access (OA to scientific publications is steadily increasing, both in Norway and internationally. From the outset, FORMakademisk has been published as a digital journal, and it was one of the first to offer OA in Norway. We have since the beginning used Open Journal Systems (OJS as publishing software. OJS is part of the Public Knowledge Project (PKP, which was created by Canadian John Willinsky and colleagues at the Faculty of Education at the University of British Columbia in 1998. The first version of OJS came as an open source software in 2001. The programme is free for everyone to use and is part of a larger collective movement wherein knowledge is shared. When FORMakademisk started in 2008, we received much help from the journal Acta Didactic (n.d. at the University of Oslo, which had started the year before us. They had also translated the programme to Norwegian. From the start, we were able to publish in both Norwegian and English. Other journals have used FORMakademisk as a model and source of inspiration when starting or when converting from subscription-based print journals to electronic OA, including the Journal of Norwegian Media Researchers [Norsk medietidsskrift]. It is in this way that the movement around PKP works and continues to grow to provide free access to research. As the articles are OA, they are also easily accessible to non-scientists. We also emphasise that the language should be readily available, although it should maintain a high scientific quality. Often there may be two sides of the same coin. We on the editorial team are now looking forward to adopting the newly developed OJS 3 this spring, with many new features and an improved design for users, including authors, peer reviewers, editors and readers.

  13. Fostering successful scientific software communities

    Science.gov (United States)

    Bangerth, W.; Heister, T.; Hwang, L.; Kellogg, L. H.

    2016-12-01

    Developing sustainable open source software packages for the sciences appears at first to be primarily a technical challenge: How can one create stable and robust algorithms, appropriate software designs, sufficient documentation, quality assurance strategies such as continuous integration and test suites, or backward compatibility approaches that yield high-quality software usable not only by the authors, but also the broader community of scientists? However, our experience from almost two decades of leading the development of the deal.II software library (http://www.dealii.org, a widely-used finite element package) and the ASPECT code (http://aspect.dealii.org, used to simulate convection in the Earth's mantle) has taught us that technical aspects are not the most difficult ones in scientific open source software. Rather, it is the social challenge of building and maintaining a community of users and developers interested in answering questions on user forums, contributing code, and jointly finding solutions to common technical and non-technical challenges. These problems are posed in an environment where project leaders typically have no resources to reward the majority of contributors, where very few people are specifically paid for the work they do on the project, and with frequent turnover of contributors as project members rotate into and out of jobs. In particular, much software work is done by graduate students who may become fluent enough in a software only a year or two before they leave academia. We will discuss strategies we have found do and do not work in maintaining and growing communities around the scientific software projects we lead. Specifically, we will discuss the management style necessary to keep contributors engaged, ways to give credit where credit is due, and structuring documentation to decrease reliance on forums and thereby allow user communities to grow without straining those who answer questions.

  14. A generative model for scientific concept hierarchies.

    Science.gov (United States)

    Datta, Srayan; Adar, Eytan

    2018-01-01

    In many scientific disciplines, each new 'product' of research (method, finding, artifact, etc.) is often built upon previous findings-leading to extension and branching of scientific concepts over time. We aim to understand the evolution of scientific concepts by placing them in phylogenetic hierarchies where scientific keyphrases from a large, longitudinal academic corpora are used as a proxy of scientific concepts. These hierarchies exhibit various important properties, including power-law degree distribution, power-law component size distribution, existence of a giant component and less probability of extending an older concept. We present a generative model based on preferential attachment to simulate the graphical and temporal properties of these hierarchies which helps us understand the underlying process behind scientific concept evolution and may be useful in simulating and predicting scientific evolution.

  15. Improving the scientific misconduct hearing process.

    Science.gov (United States)

    Parrish, D M

    The overturning and withdrawal of several of the Office of Research Integrity's (ORI's) findings of scientific misconduct have called its role into question. The contested findings of scientific misconduct that have been tried before the hearing body have been based on lengthy and expensive ORI investigations. How could ORI have failed to prove its findings of scientific misconduct after the commitment of substantial resources that far exceed those devoted during institutional investigations? One reason may be that the current hearing process makes it difficult or impossible for ORI, institutions, or individuals to prove scientific misconduct. The hearing process has been criticized by discouraged whistleblowers who believe that their allegations of scientific misconduct should have been upheld, and by the accused for the expensive and protracted nature of the proceedings. The following article examines problems in the scientific misconduct hearing process and suggests that the process could be improved by letting administrative law judges, patent attorneys, and a scientific majority decide these cases.

  16. A generative model for scientific concept hierarchies

    Science.gov (United States)

    Adar, Eytan

    2018-01-01

    In many scientific disciplines, each new ‘product’ of research (method, finding, artifact, etc.) is often built upon previous findings–leading to extension and branching of scientific concepts over time. We aim to understand the evolution of scientific concepts by placing them in phylogenetic hierarchies where scientific keyphrases from a large, longitudinal academic corpora are used as a proxy of scientific concepts. These hierarchies exhibit various important properties, including power-law degree distribution, power-law component size distribution, existence of a giant component and less probability of extending an older concept. We present a generative model based on preferential attachment to simulate the graphical and temporal properties of these hierarchies which helps us understand the underlying process behind scientific concept evolution and may be useful in simulating and predicting scientific evolution. PMID:29474409

  17. Making Sense of Scientific Biographies: Scientific Achievement, Nature of Science, and Storylines in College Students' Essays

    Science.gov (United States)

    Hwang, Seyoung

    2015-01-01

    In this article, the educative value of scientific biographies will be explored, especially for non-science major college students. During the "Scientist's life and thought" course, 66 college students read nine scientific biographies including five biologists, covering the canonical scientific achievements in Western scientific history.…

  18. Effects of Scaffolds and Scientific Reasoning Ability on Web-Based Scientific Inquiry

    Science.gov (United States)

    Wu, Hui-Ling; Weng, Hsiao-Lan; She, Hsiao-Ching

    2016-01-01

    This study examined how background knowledge, scientific reasoning ability, and various scaffolding forms influenced students' science knowledge and scientific inquiry achievements. The students participated in an online scientific inquiry program involving such activities as generating scientific questions and drawing evidence-based conclusions,…

  19. Exploration of Korean Students' Scientific Imagination Using the Scientific Imagination Inventory

    Science.gov (United States)

    Mun, Jiyeong; Mun, Kongju; Kim, Sung-Won

    2015-01-01

    This article reports on the study of the components of scientific imagination and describes the scales used to measure scientific imagination in Korean elementary and secondary students. In this study, we developed an inventory, which we call the Scientific Imagination Inventory (SII), in order to examine aspects of scientific imagination. We…

  20. Scientific goals of SCHOOLS & QUAKES

    Science.gov (United States)

    Brückl, Ewald; Köberl, Christian; Lenhardt, Wolfgang; Mertl, Stefan; Rafeiner-Magor, Walter; Stark, Angelika; Stickler, Gerald; Weber, Robert

    2015-04-01

    In many countries around the world seismometers are used in schools to broaden the knowledge in seismology in a vivid way and to take part in the observation of the current worldwide seismic activity. SCHOOLS & QUAKES is a project within the Sparkling Science program (http://www.sparklingscience.at), which not only pursues the given educational goals but also integrates scholars in seismological research permitting their own contributions. Research within SCHOOLS & QUAKES concentrates on the seismic activity of the Mürz Valley - Semmering - Vienna Basin transfer fault system in Austria because of its relatively high earthquake hazard and risk. The detection of low magnitude local earthquakes (magnitude ≤ 2), precise location of hypocenters, determination of the focal mechanisms, and correlation of hypocenters with active geological structures are the main scientific goals in this project. Furthermore, the long term build-up of tectonic stress, slip deficit and aseismic slip, and the maximum credible earthquake in this area are issues to be addressed. The scientific efforts of SCHOOLS & QUAKES build on the work of the Seismological Service of Austria at the Zentralanstalt für Meteorologie und Geodynamik (ZAMG), and benefit from the findings on the lithospheric structure of the Eastern Alps gained by the CELEBRATION 2000 and ALP 2002 projects. Regional Vp and Vs-models were derived from this data covering the SCHOOLS & QUAKES target area. Within the ALPAACT project (Seismological and geodetic monitoring of ALpine-PAnnonian ACtive Tectonics) the seismic network of the target area was densified by 7 broadband und 2 short period stations. Relocations based on a 3D-velocity model and the densified seismic network yielded substantially higher spatial resolution of seismically active structures. A new method based on waveform stacking (GRA, 16, EGU2014-5722) allowed for focal mechanism solutions of low magnitude (Ml ~2.5) events. Data from 22 GNSS stations have been

  1. Ontolology Negotiation Between Scientific Archives

    Science.gov (United States)

    Bailin, Sidney C.; Truszkowski, Walt; Obenschain, Arthur F. (Technical Monitor)

    2001-01-01

    This paper describes an approach to ontology negotiation between information agents. Ontologies are declarative (data driven) expressions of an agent's "world": the objects, operations, facts, and rules that constitute the logical space within which an agent performs. Ontology negotiation enables agents to cooperate in performing a task, even if they are based on different ontologies. 'Me process allows agents to discover ontology conflicts and then, though incremental interpretation, clarification, and explanation, establish a common basis for communicating with each other. The need for ontology negotiation stems from the proliferation of information sources and of agents with widely varying specialty expertise. The unmanageability of massive amounts of web-based information is already becoming apparent. It is starting to have an impact on professions that rely on distributed archived information. If the expansion continues at its present rate without an ontology negotiation process being introduced, there will soon be no way to ensure the accuracy and completeness of information that scientists obtain from sources other than their own experiments. Ontology negotiation is becoming increasingly recognized as a crucial element of scalable agent technology. This is because agents, by their very nature, are supposed to operate with a fair amount of autonomy and independence from their end-users. Part of this independence is the ability to enlist other agents for help in performing a task (such as locating information on the web). The agents enlisted for help may be "owned" by a different end-user or organization (such as a document archive), and there is no guarantee that they will use the same terminology or understand the same concepts (objects, operators, theorems, rules) as the recruiting agent. For NASA, the need for ontology negotiation arises at the boundaries between scientific disciplines. For example: modeling the effects of global warming might involve

  2. Scientific spirit in early childhood

    Directory of Open Access Journals (Sweden)

    Isabel Samacá Bohórquez

    2016-01-01

    Full Text Available Play and fun are key elements in the pedagogical work with five-year school children, since the teacher is required to carry out a hermeneutical and phenomenological exercise coming from the interaction among the different languages used by children to communicate their thoughts, emotions and ideas. In order to reflect about the scientific spirit in early childhood, it is necessary firstly to think about how its logic develops and operates and about the need to recognize in the sociocultural environment the possibilities to stimulate talents or the limitations demarcating their development, secondly, teaching practice must be thought in order to establish dialogue forums with students to know their needs and interests and guide their searches. To meet other is possible for children to the extent that the dialogical principle of knowledge interaction is recognized and the discovery of tensions and meeting points around the educational praxis, as an approach to infant’s rationality and his/her ways of learning, towards the social construction of boy and girl gender identity in our society.

  3. Scientific and Technical Report, 1997

    International Nuclear Information System (INIS)

    Metivier, Henri; Mur, Emmanuelle

    1998-01-01

    This report highlights the most significant scientific and technical achievements of the Institute of Nuclear Protection and Safety in 1997. In all 23 reports are grouped in the following 7 sections: 1.Reactor safety; 2.Safety of nuclear facility; 3.Safeguards for radioactive materials and transports; 4.Public protection; 5.Environment protection; 6.Radioactive waste safety; 7.Crisis management. Special attention is paid to the pressurized water and fast neutron reactors and, accordingly, the program PHEBUS PF and the first results obtained with it concerning nuclear safety are reported. The safety of nuclear fuel cycle and spent fuel storage is addressed in a couple of reports, as well as the problem of inspection, measurement and containers for nuclear materials. Concerning the public and environment protection, studies are reported on medical surveillance of people working with CEA Group, and clinical dosimetric follow-up of radiological events as well as the strategy of contaminated site rehabilitation. In the field of radioactive waste management, the IPSN project of Tournemire tunnel and the project of deep disposal are presented. Finally, the issue of major nuclear accidents is approached through the exercise Becquerel, the SESAME system of predicting the radioactive products release in PWR reactors and ASTRAL, the evaluation system of aftermath of an accidental environmental contamination by radioactive release. Each section of this IPSN report is opened by a review paper

  4. Problematizing as a scientific endeavor

    Directory of Open Access Journals (Sweden)

    Anna McLean Phillips

    2017-08-01

    Full Text Available The work of physics learners at all levels revolves around problems. Physics education research has inspired attention to the forms of these problems, whether conceptual or algorithmic, closed or open response, well or ill structured. Meanwhile, it has been the work of curriculum developers and instructors to develop these problems. Physics education research has supported these efforts with studies of students problem solving and the effects of different kinds of problems on learning. In this article we argue, first, that developing problems is central to the discipline of physics. It involves noticing a gap of understanding, identifying and articulating its precise nature, and motivating a community of its existence and significance. We refer to this activity as problematizing, and we show its importance by drawing from writings in physics and philosophy of science. Second, we argue that students, from elementary age to adults, can problematize as part of their engaging in scientific inquiry. We present four cases, drawing from episodes vetted by a panel of collaborating faculty in science departments as clear instances of students doing science. Although neither we nor the scientists had problematizing in mind when screening cases, we found it across the episodes. We close with implications for instruction, including the value of helping students recognize and manage the situation of being confused but not yet having a clear question, and implications for research, including the need to build problematizing into our models of learning.

  5. Problematizing as a scientific endeavor

    Science.gov (United States)

    Phillips, Anna McLean; Watkins, Jessica; Hammer, David

    2017-12-01

    The work of physics learners at all levels revolves around problems. Physics education research has inspired attention to the forms of these problems, whether conceptual or algorithmic, closed or open response, well or ill structured. Meanwhile, it has been the work of curriculum developers and instructors to develop these problems. Physics education research has supported these efforts with studies of students problem solving and the effects of different kinds of problems on learning. In this article we argue, first, that developing problems is central to the discipline of physics. It involves noticing a gap of understanding, identifying and articulating its precise nature, and motivating a community of its existence and significance. We refer to this activity as problematizing, and we show its importance by drawing from writings in physics and philosophy of science. Second, we argue that students, from elementary age to adults, can problematize as part of their engaging in scientific inquiry. We present four cases, drawing from episodes vetted by a panel of collaborating faculty in science departments as clear instances of students doing science. Although neither we nor the scientists had problematizing in mind when screening cases, we found it across the episodes. We close with implications for instruction, including the value of helping students recognize and manage the situation of being confused but not yet having a clear question, and implications for research, including the need to build problematizing into our models of learning.

  6. The hunter a scientific novel

    CERN Document Server

    Genta, Giancarlo

    2013-01-01

    The 24th century: humankind has become a spacefaring civilization, colonizing the solar system and beyond. While no alien forms of life have yet been encountered in this expansion into space, colonists suddenly encounter machines of alien origin - huge robots able to reproduce themselves.  Called replicators by the colonists, they seem to have but a single goal: to destroy all organic life they come in contact with. Since the colonial governments have no means to fight this menace directly, they instead promise huge rewards to whoever destroys a replicator. As a result, the frontier attracts a new kind of adventurers, the Hunters, who work to find and destroy the replicators. Mike Edwards, a skilled young maintenance technician and robotics expert at a faraway outpost, will not only become one of them - but be the very first one to unlock the secret behind the replicators’ origin and mission.   The scientific and technical aspects underlying the plot - in particular space travel, robotics and self-replica...

  7. Scientific progress as increasing verisimilitude.

    Science.gov (United States)

    Niiniluoto, Ilkka

    2014-06-01

    According to the foundationalist picture, shared by many rationalists and positivist empiricists, science makes cognitive progress by accumulating justified truths. Fallibilists, who point out that complete certainty cannot be achieved in empirical science, can still argue that even successions of false theories may progress toward the truth. This proposal was supported by Karl Popper with his notion of truthlikeness or verisimilitude. Popper's own technical definition failed, but the idea that scientific progress means increasing truthlikeness can be expressed by defining degrees of truthlikeness in terms of similarities between states of affairs. This paper defends the verisimilitude approach against Alexander Bird who argues that the "semantic" definition (in terms of truth or truthlikeness alone) is not sufficient to define progress, but the "epistemic" definition referring to justification and knowledge is more adequate. Here Bird ignores the crucial distinction between real progress and estimated progress, explicated by the difference between absolute (and usually unknown) degrees of truthlikeness and their evidence-relative expected values. Further, it is argued that Bird's idea of returning to the cumulative model of growth requires an implausible trick of transforming past false theories into true ones.

  8. NIPNE-Scientific Report 1997

    International Nuclear Information System (INIS)

    Alexa, Calin; Andries, Mihai; Badescu, Elisabeta

    1998-01-01

    This annual report of the Horia Hulubei National Institute for Physics and Nuclear Engineering on 1997 covers the following eight main directions: 1 - Theoretical Physics (42 p.); 2 - Experimental Physics (76 p.); 3 - Biophysics (8 p.); 4 - Applied Physics (40 p.); 5 - Radiation Processing, Tracers and Radiometry (16 p.); 6 - Technological Development (12 p.); 7 - Waste Management and Site Restoration (16 p.); 8 - Standardization (6 p.). The Theoretical Physics division contains four research fields: 1 - Nuclear and Atomic Physics; 2 - Condensed Matter: 3 - Mathematical Physics, Field Theory and Elementary Particles: 4 - Physics of Information. The Experimental Physics division is divided in the following seven directions: 1 - Nuclear Structure; 2 - Nuclear Reactions; 3 - Atomic Physics; 4 - Particle Physics; 5 - Cosmic Rays and Nuclear Astrophysics; 6 - Inertial Fusion, Physics of Neutrons and Nuclear Transmutations; 7 - Nuclear Instruments and Methods. The Waste Management and Site Restoration section is dealing with: 1 - Nuclear Reactors; 2 - Radioactive Waste Treatment Facility. The document contains also appendices reporting: Publications (journals, books and preprints); Contributions at international conferences; Patents; PhD Theses; Training courses; Scientific exchanges (foreign visitors, invited seminars, visits abroad, seminars abroad); Research Staff

  9. Managing scientific information and research data

    CERN Document Server

    Baykoucheva, Svetla

    2015-01-01

    Innovative technologies are changing the way research is performed, preserved, and communicated. Managing Scientific Information and Research Data explores how these technologies are used and provides detailed analysis of the approaches and tools developed to manage scientific information and data. Following an introduction, the book is then divided into 15 chapters discussing the changes in scientific communication; new models of publishing and peer review; ethics in scientific communication; preservation of data; discovery tools; discipline-specific practices of researchers for gathering and using scientific information; academic social networks; bibliographic management tools; information literacy and the information needs of students and researchers; the involvement of academic libraries in eScience and the new opportunities it presents to librarians; and interviews with experts in scientific information and publishing.

  10. The ESO Scientific and Technical Committee.

    Science.gov (United States)

    Léna, P.

    1982-03-01

    Since 1978, the structure of ESO involves a Scientific and Technical Committee (STC) which advises the Council on scientific and technical matters. This committee meets twice a year, usually at Garehing; its members are nominated by the Council and their term is 4 years. The STC has 10 members, who are as evenly distributed as possible among member countries, although indeed mainly chosen for their scientific abilities. The chairman is invited to attend Council meetings and to report to the members.

  11. Clustering of scientific citations in Wikipedia

    DEFF Research Database (Denmark)

    Nielsen, Finn Årup

    The instances of templates in Wikipedia form an interesting data set of structured information. Here I focus on the cite journal template that is primarily used for citation to articles in scientific journals. These citations can be extracted and analyzed: Non-negative matrix factorization...... is performed on a (article x journal) matrix resulting in a soft clustering of Wikipedia articles and scientific journals, each cluster more or less representing a scientific topic....

  12. On Writing Scientific Articles in English

    Institute of Scientific and Technical Information of China (English)

    JamesHartley

    2003-01-01

    If we examine the text of scientific articles it is clear that there is a generally accepted way of writing them. Scientific prose in English stereotypically uses the third person, the passive tense, complex terminology, and various footnoting and referencing systems. Scientific prose is not known for discursive anecdotes, humour, pictures, colour, bizarre typography or exclamation marks! Often the written text appears quite impersonal-the human element is removed.

  13. Speech and scientific paper. A rhetorical approach

    Directory of Open Access Journals (Sweden)

    Juan Carlos Carmona Sandoval

    2013-01-01

    Full Text Available This essay attempts to show that the ancient rhetorical theory has explanatory capabilities to understand and learn to write modern texts and to analyze them in order to understand their communication skills, as in the scientific article, one of the most prestigious forms on scientific communication. It starts with the notion of discourse in the field of scientific communication and then address the rhetorical dimension of the paper.

  14. Scientific word, Version 1.0

    Directory of Open Access Journals (Sweden)

    Semen Köksal

    1993-01-01

    Full Text Available Scientific Word is the first fully integrated mathematical word processor in the Windows 3.1 environment, which uses the TEX typesetting language for output. It runs as a Microsoft Windows application program and has two-way interface to TEX. The Scientific Word is an object-oriented WYSIWYG word processor for virtually all users who need typesetting scientific books, manuals and papers. It includes automatic equation numbering, spell checking, and LATEX and DVI previewer.

  15. Introduction to scientific publishing backgrounds, concepts, strategies

    CERN Document Server

    Öchsner, Andreas

    2013-01-01

    This book is a very concise introduction to the basic knowledge of scientific publishing. It  starts with the basics of writing a scientific paper, and recalls the different types of scientific documents. In gives an overview on the major scientific publishing companies and different business models. The book also introduces to abstracting and indexing services and how they can be used for the evaluation of science, scientists, and institutions. Last but not least, this short book faces the problem of plagiarism and publication ethics.

  16. How to write a good scientific paper

    CERN Document Server

    Mack, Chris A

    2018-01-01

    Many scientists and engineers consider themselves poor writers or find the writing process difficult. The good news is that you do not have to be a talented writer to produce a good scientific paper, but you do have to be a careful writer. In particular, writing for a peer-reviewed scientific or engineering journal requires learning and executing a specific formula for presenting scientific work. This book is all about teaching the style and conventions of writing for a peer-reviewed scientific journal. From structure to style, titles to tables, abstracts to author lists, this book gives practical advice about the process of writing a paper and getting it published.

  17. Mapping the research on scientific collaboration

    Institute of Scientific and Technical Information of China (English)

    HOU Jianhua; CHEN Chaomei; YAN Jianxin

    2010-01-01

    The aim of this paper was to identify the trends and hot topics in the study of scientific collaboration via scientometric analysis.Information visualization and knowledge domain visualization techniques were adopted to determine how the study of scientific collaboration has evolved.A total of 1,455 articles on scientific cooperation published between 1993 and 2007 were retrieved from the SCI,SSCI and A&HCI databases with a topic search of scientific collaboration or scientific cooperation for the analysis.By using CiteSpace,the knowledge bases,research foci,and research fronts in the field of scientific collaboration were studied.The results indicated that research fronts and research foci are highly consistent in terms of the concept,origin,measurement,and theory of scientific collaboration.It also revealed that research fronts included scientific collaboration networks,international scientific collaboration,social network analysis and techniques,and applications of bibliometrical indicators,webmetrics,and health care related areas.

  18. The emergence of scientific management in America

    Directory of Open Access Journals (Sweden)

    Sorin-George Toma

    2014-05-01

    Full Text Available A scientific approach to management was initiated for the first time in America in the late 19th century. Scientific management arose mainly from the need to increase efficiency in America, but other key factors were the spread of big businesses and the expanding application of science in industry. The aims of our paper are to present the emergence of scientific management in America and to emphasize the contribution of some of the most representatives American authors to its development. The methodological approach is literature review. Our paper shows that scientific management was essentially an American achievement that provided useful lessons for the whole human society.

  19. Scientific Integrity Policy Creation and Implementation.

    Science.gov (United States)

    Koizumi, K.

    2017-12-01

    Ensuring the integrity of science was a priority for the Obama Administration. In March 2009, President Obama issued a Presidential Memorandum that recognized the need for the public to be able to trust the science and scientific process informing public policy decisions. In 2010, the White House Office of Science and Technology Policy (OSTP) issued a Memorandum providing guidelines for Federal departments and agencies to follow in developing scientific integrity policies. This Memorandum describes minimum standards for: (1) strengthening the foundations of scientific integrity in government, including by shielding scientific data and analysis from inappropriate political influence; (2) improving public communication about science and technology by promoting openness and transparency; (3) enhancing the ability of Federal Advisory Committees to provide independent scientific advice; and (4) supporting the professional development of government scientists and engineers. The Memorandum called upon the heads of departments and agencies to develop scientific integrity policies that meet these requirements. At the end of the Obama Administration, 24 Federal departments and agencies had developed and implemented scientific integrity policies consistent with the OSTP guidelines. This year, there are significant questions as to the Trump Administration's commitment to these scientific integrity policies and interest in the Congress in codifying these policies in law. The session will provide an update on the status of agency scientific integrity policies and legislation.

  20. Brazilian law for scientific use of animals.

    Science.gov (United States)

    Marques, Ruy Garcia; Morales, Marcelo Marcos; Petroianu, Andy

    2009-01-01

    The Brazilian scientific community claimed for a definitive systematization and for comprehensive and realistic national rules, to provide guidance and regulation, instead of sanctions, so that the question of scientific research involving animals could be better contemplated. This is beginning to occur now with Law no. 11.794, sanctioned by the President of the Republic on November 8, 2008. To describe the evolution of Brazilian regimentation for scientific use of animals and to analyze Law no. 11.794. The legislation about the use of animals in teaching and in scientific research in Brazil and in Rio de Janeiro State was identified and discussed. Until now, there was no updated general and systematizing rule regarding animal vivisection and experimentation for didactic or scientific purposes. The only specific law dates back to 1979 and was not regimented. More recent laws equated the practice of scientific experiments to acts of abuse and mistreatment of animals, when alternative technology was available. Municipal laws that restricted the scientific practice of vivisection and experimentation with animals were created in the cities of Rio de Janeiro and Florianopolis. With the claim and collaboration of the scientific community, the sanction of Law no. 11.794 regarding the scientific use of animals represented an invaluable advance in spite of the presence of some points that eventually may require another type of treatment. The new Law states that it will be regimented within 180 (one-hundred-and-eighty) days, when some of these points could be better elucidated.