Increased wood-fiber production: technology, economics, and ecology

Science.gov (United States)

William R. Bentley

1973-01-01

Forest tree improvement is a form of technological change, and it should be viewed as such. The economic objective of technological change is to increase productivity per dollar invested. This is accomplished through selection and breeding for increased growth rates or reduced losses to insects and disease. Programs which yield improved planting stock make forest...

Finding the economics in economic entomology.

Science.gov (United States)

Onstad, David W; Knolhoff, Lisa M

2009-02-01

To recommend new pest management tactics and strategies to farmers and policy makers, economic entomologists must evaluate the economics of biologically reasonable approaches. We collected data to determine how frequently these economic evaluations occur. We discovered from our survey of entomological journals representing the discipline of economic entomology that papers published since 1972 include economic evaluations of pest management tactics. At least 85% of these analyses were performed by entomologists and not economists. Much of the research on economic evaluations is performed without special funds granted by agencies separate from the authors' institutions. In the United States, USDA competitive grants supported 20% of the economic evaluations published since 2000. However, only approximately 12% of the projects funded since 2000 by three sections of the USDA (Crops at Risk, Risk Avoidance and Mitigation Program, and Pest Management Alternatives Program) resulted in publications concerning economic evaluations. If the purpose of economic entomology is to ultimately determine the value of different kinds of tactics, the discipline may need to take steps to enhance the research that supports these evaluations.

Shear wall ultimate drift limits

International Nuclear Information System (INIS)

Duffey, T.A.; Goldman, A.; Farrar, C.R.

1994-04-01

Drift limits for reinforced-concrete shear walls are investigated by reviewing the open literature for appropriate experimental data. Drift values at ultimate are determined for walls with aspect ratios ranging up to a maximum of 3.53 and undergoing different types of lateral loading (cyclic static, monotonic static, and dynamic). Based on the geometry of actual nuclear power plant structures exclusive of containments and concerns regarding their response during seismic (i.e.,cyclic) loading, data are obtained from pertinent references for which the wall aspect ratio is less than or equal to approximately 1, and for which testing is cyclic in nature (typically displacement controlled). In particular, lateral deflections at ultimate load, and at points in the softening region beyond ultimate for which the load has dropped to 90, 80, 70, 60, and 50 percent of its ultimate value, are obtained and converted to drift information. The statistical nature of the data is also investigated. These data are shown to be lognormally distributed, and an analysis of variance is performed. The use of statistics to estimate Probability of Failure for a shear wall structure is illustrated

Ultimate and proximate explanations of strong reciprocity.

Science.gov (United States)

Vromen, Jack

2017-08-23

Strong reciprocity (SR) has recently been subject to heated debate. In this debate, the "West camp" (West et al. in Evol Hum Behav 32(4):231-262, 2011), which is critical of the case for SR, and the "Laland camp" (Laland et al. in Science, 334(6062):1512-1516, 2011, Biol Philos 28(5):719-745, 2013), which is sympathetic to the case of SR, seem to take diametrically opposed positions. The West camp criticizes advocates of SR for conflating proximate and ultimate causation. SR is said to be a proximate mechanism that is put forward by its advocates as an ultimate explanation of human cooperation. The West camp thus accuses advocates of SR for not heeding Mayr's original distinction between ultimate and proximate causation. The Laland camp praises advocates of SR for revising Mayr's distinction. Advocates of SR are said to replace Mayr's uni-directional view on the relation between ultimate and proximate causes by the bi-directional one of reciprocal causation. The paper argues that both the West camp and the Laland camp misrepresent what advocates of SR are up to. The West camp is right that SR is a proximate cause of human cooperation. But rather than putting forward SR as an ultimate explanation, as the West camp argues, advocates of SR believe that SR itself is in need of ultimate explanation. Advocates of SR tend to take gene-culture co-evolutionary theory as the correct meta-theoretical framework for advancing ultimate explanations of SR. Appearances notwithstanding, gene-culture coevolutionary theory does not imply Laland et al.'s notion of reciprocal causation. "Reciprocal causation" suggests that proximate and ultimate causes interact simultaneously, while advocates of SR assume that they interact sequentially. I end by arguing that the best way to understand the debate is by disambiguating Mayr's ultimate-proximate distinction. I propose to reserve "ultimate" and "proximate" for different sorts of explanations, and to use other terms for distinguishing

Physical demands in competitive ultimate frisbee

DEFF Research Database (Denmark)

Krustrup, Peter; Mohr, Magni

2015-01-01

The objective was to study game demands in competitive ultimate Frisbee by performing match analysis during a game. Thirteen moderately trained (Yo-Yo intermittent recovery test levels 1 and 2 [Yo-Yo IR1 and IR2] performance: 1790 ± 382 m and 657 ± 225 m, respectively) competitive male ultimate...... = 0.74, p ≤ 0.05). Ultimate Frisbee is an intense intermittent team sport with high cardiovascular loading and clear indications of fatigue toward the end of each half. Yo-Yo IR test performances correlate with physical match performance....

Economic Assessment of Rising Global Demand for Farmland

DEFF Research Database (Denmark)

Hvid, Anna

and homogeneous group in a country with political competition and stability. However, if the power distribution between the farmers and the political-economic elite is highly equal, this may have negative welfare effects, because the competition for rents will be very high, and hence a large amount of resources...... incomes, with poverty reductions and general economic development as the ultimate outcome. On the other hand it could also induce a neo-colonial scramble for land, where politically and economically powerful actors appropriate land at the expense of rural populations, whose livelihoods depend on this land...... increasing land values will mainly benefit the rural populations or the political-economic elites. In addition, it takes into account the deeper determinants of the extent to which farmers are able to obtain political power, and thereby claim their rights to a share of the benefits from increased value...

Economic impact of reduced mortality due to increased cycling.

Science.gov (United States)

Rutter, Harry; Cavill, Nick; Racioppi, Francesca; Dinsdale, Hywell; Oja, Pekka; Kahlmeier, Sonja

2013-01-01

Increasing regular physical activity is a key public health goal. One strategy is to change the physical environment to encourage walking and cycling, requiring partnerships with the transport and urban planning sectors. Economic evaluation is an important factor in the decision to fund any new transport scheme, but techniques for assessing the economic value of the health benefits of cycling and walking have tended to be less sophisticated than the approaches used for assessing other benefits. This study aimed to produce a practical tool for estimating the economic impact of reduced mortality due to increased cycling. The tool was intended to be transparent, easy to use, reliable, and based on conservative assumptions and default values, which can be used in the absence of local data. It addressed the question: For a given volume of cycling within a defined population, what is the economic value of the health benefits? The authors used published estimates of relative risk of all-cause mortality among regular cyclists and applied these to levels of cycling defined by the user to produce an estimate of the number of deaths potentially averted because of regular cycling. The tool then calculates the economic value of the deaths averted using the "value of a statistical life." The outputs of the tool support decision making on cycle infrastructure or policies, or can be used as part of an integrated economic appraisal. The tool's unique contribution is that it takes a public health approach to a transport problem, addresses it in epidemiologic terms, and places the results back into the transport context. Examples of its use include its adoption by the English and Swedish departments of transport as the recommended methodologic approach for estimating the health impact of walking and cycling. Copyright © 2013 World Health Organization. Published by Elsevier Inc. All rights reserved.

The Economic Burden of Malnutrition in Pregnant Women and Children under 5 Years of Age in Cambodia.

Science.gov (United States)

Moench-Pfanner, Regina; Silo, Sok; Laillou, Arnaud; Wieringa, Frank; Hong, Rathamony; Hong, Rathavuth; Poirot, Etienne; Bagriansky, Jack

2016-05-14

Malnutrition is locked in a vicious cycle of increased mortality, poor health, impaired cognitive development, slow physical growth, reduced learning capacity, inferior performance, and ultimately lower adult work performance and productivity. The consensus of global scientific evidence indicates that lowering the rates of malnutrition will be an indispensable component of any successful program to raise the quality of human capital and resources. This study used a "consequence model" to apply the coefficient risk-deficit on economic losses, established in the global scientific literature, to Cambodian health, demographic, and economic data to develop a national estimate of the value of economic losses due to malnutrition. The impact of the indicators of malnutrition analyzed represent a burden to the national economy of Cambodia estimated at 266 million USD annually (1.7% of GDP). Stunting is reducing the Cambodian economic output by more than 120 million USD, and iodine deficiency disorders alone by 57 million USD. This economic burden is too high in view of Cambodia's efforts to drive economic development. The government should rapidly expand a range of low-cost effective nutrition interventions to break the current cycle of increased mortality, poor health and ultimately lower work performance, productivity, and earnings.

Educational attainment and ultimate fertility among Swedish women born in 1955-59

Directory of Open Access Journals (Sweden)

Gerda Neyer

2006-05-01

Full Text Available This is the second of two companion papers addressing the association between educational attainment and fertility for some sixty educational groups of Swedish women, defined according to field of education as well as level of education. The first paper is about childlessness and education, the present one about the mean number of children ever born. We find that ultimate fertility decreases somewhat with an increasing educational level, but its dependence on the field of education is much more impressive. In general, educational groups with relatively little childlessness also have relatively high ultimate fertility, and educational groups with much childlessness have relatively low ultimate fertility. In particular, women educated for the teaching or health-care professions have less childlessness and a higher ultimate fertility than others. Conversely, women with an education for esthetic or (non-teacher humanist occupations have unusually high fractions childless and low ultimate fertility. Women with religious educations stand out by having very high fractions childless but quite ordinary mean ultimate fertility nevertheless; such women have very little childbearing outside of marriage. Women with research degrees have remarkably ordinary childbearing behavior; they do not forego motherhood to the extent that some theories would predict.

Optimized molten salt receivers for ultimate trough solar fields

Science.gov (United States)

Riffelmann, Klaus-J.; Richert, Timo; Kuckelkorn, Thomas

2016-05-01

Today parabolic trough collectors are the most successful concentrating solar power (CSP) technology. For the next development step new systems with increased operation temperature and new heat transfer fluids (HTF) are currently developed. Although the first power tower projects have successfully been realized, up to now there is no evidence of an all-dominant economic or technical advantage of power tower or parabolic trough. The development of parabolic trough technology towards higher performance and significant cost reduction have led to significant improvements in competitiveness. The use of molten salt instead of synthetic oil as heat transfer fluid will bring down the levelized costs of electricity (LCOE) even further while providing dispatchable energy with high capacity factors. FLABEG has developed the Ultimate TroughTM (UT) collector, jointly with sbp Sonne GmbH and supported by public funds. Due to its validated high optical accuracy, the collector is very suitable to operate efficiently at elevated temperatures up to 550 °C. SCHOTT will drive the key-innovations by introducing the 4th generation solar receiver that addresses the most significant performance and cost improvement measures. The new receivers have been completely redesigned to provide a product platform that is ready for high temperature operation up to 550 °C. Moreover distinct product features have been introduced to reduce costs and risks in solar field assembly and installation. The increased material and design challenges incurred with the high temperature operation have been reflected in sophisticated qualification and validation procedures.

Exploration economics

International Nuclear Information System (INIS)

Mcgill, R.E.

1992-01-01

This paper deals with determining the economic viability of the play or prospect. At the outset, one point is important. Preexploration economists are important because they enable geologists to see if their assumptions will prove profitable. Their assumptions must consider the full range of possible outcomes, even if only some portion of that range may contain prospects or plays that are estimated to be profitable. Play economics are preferable to prospect economics because, being the sum of several prospects, they give a broader view of the investment opportunity. Finally, remember that play and prospect economics are always slightly optimistic. They seldom include all of the exploration and overhead changes that must ultimately be borne by the successful prospects

Process Inherent Ultimate Safety (PIUS) reactor evaluation study: Final report

International Nuclear Information System (INIS)

1987-02-01

This report presents the results of an independent study by United Engineers and Constructors (UNITED) of the SECURE-P Process Inherent Ultimate Safety (PIUS) Reactor Concept which is presently under development by the Swedish light water reactor vendor ASEA-ATOM of Vasteras, Sweden. This study was performed to investigate whether there is any realistic basis for believing that the PIUS reactor could be a viable competitor in the US energy market in the future. Assessments were limited to the technical, economic and licensing aspects of PIUS. Socio-political issues, while certainly important in answering this question, are so broad and elusive that it was considered that addressing them with the limited perspective of one small group from one company would be of questionable value and likely be misleading. Socio-political issues aside, the key issue is economics. For this reason, the specific objectives of this study were to determine if the estimated PIUS plant cost will be competitive in the US market and to identify and evaluate the technical and licensing risks that might make PIUS uneconomical or otherwise unacceptable

Influence of cracks and pitting corrosion on residual ultimate strength of stiffened plates

Directory of Open Access Journals (Sweden)

ZHANG Jing

2018-02-01

Full Text Available [Objectives] Ships and offshore platforms serve in the harsh sea environment for a long time. Cracks and pitting corrosion will occur in such a structure and the damage will affect its ultimate strength.[Methods] To investigate the influence of cracks and pitting corrosion on ultimate bearing capacity, the ultimate strength of a structure under axial compression is studied by using a nonlinear finite element. The mesh size of a stiffened plate with cracks and pitting corrosion is first discussed. Then the influence of the relative positions of cracks and pitting corrosion, number of corrosion points and crack length impact on the residual ultimate strength of damaged stiffened plates is discussed via a series of calculations.[Results] The results indicate that the increase in crack length and pitting corrosion significantly decreases the ultimate strength of a stiffened plate. [Conclusions] This provides a useful reference for designing and maintaining ships and offshore structures in their life cycles.

Stapledon's Interplanetary Man: A Commonwealth of Worlds and the Ultimate Purpose of Space Colonisation

Science.gov (United States)

Crawford, Ian A.

In his 1948 lecture to the British Interplanetary Society Stapledon considered the ultimate purpose of colonising other worlds. Having examined the possible motivations arising from improved scientific knowledge and access to extraterrestrial raw materials, he concludes that the ultimate benefits of space colonisation will be the increased opportunities for developing human (and post-human) diversity, intellectual and aesthetic potential and, especially, `spirituality'. By the latter concept he meant a striving for ``sensitive and intelligent awareness of things in the universe (including persons), and of the universe as a whole.'' A key insight articulated by Stapledon in this lecture was that this should be the aspiration of all human development anyway, with or without space colonisation, but that the latter would greatly increase the scope for such developments. Another key aspect of his vision was the development of a diverse, but connected, `Commonwealth of Worlds' extending throughout the Solar System, and eventually beyond, within which human potential would be maximised. In this paper I analyse Stapledon's vision of space colonisation, and will conclude that his overall conclusions remain sound. However, I will also argue that he was overly utopian in believing that human social and political unity are prerequisites for space exploration (while agreeing that they are desirable objectives in their own right), and that he unnecessarily downplayed the more prosaic scientific and economic motivations which are likely to be key drivers for space exploration (if not colonisation) in the shorter term. Finally, I draw attention to some recent developments in international space policy which, although probably not influenced by Stapledon's work, are nevertheless congruent with his overarching philosophy as outlined in `Interplanetary Man?'.

The Economic Burden of Malnutrition in Pregnant Women and Children under 5 Years of Age in Cambodia

Science.gov (United States)

Moench-Pfanner, Regina; Silo, Sok; Laillou, Arnaud; Wieringa, Frank; Hong, Rathamony; Hong, Rathavuth; Poirot, Etienne; Bagriansky, Jack

2016-01-01

Malnutrition is locked in a vicious cycle of increased mortality, poor health, impaired cognitive development, slow physical growth, reduced learning capacity, inferior performance, and ultimately lower adult work performance and productivity. The consensus of global scientific evidence indicates that lowering the rates of malnutrition will be an indispensable component of any successful program to raise the quality of human capital and resources. This study used a “consequence model” to apply the coefficient risk-deficit on economic losses, established in the global scientific literature, to Cambodian health, demographic, and economic data to develop a national estimate of the value of economic losses due to malnutrition. The impact of the indicators of malnutrition analyzed represent a burden to the national economy of Cambodia estimated at 266 million USD annually (1.7% of GDP). Stunting is reducing the Cambodian economic output by more than 120 million USD, and iodine deficiency disorders alone by 57 million USD. This economic burden is too high in view of Cambodia’s efforts to drive economic development. The government should rapidly expand a range of low-cost effective nutrition interventions to break the current cycle of increased mortality, poor health and ultimately lower work performance, productivity, and earnings. PMID:27187462

The Economic Burden of Malnutrition in Pregnant Women and Children under 5 Years of Age in Cambodia

Directory of Open Access Journals (Sweden)

Regina Moench-Pfanner

2016-05-01

Full Text Available Malnutrition is locked in a vicious cycle of increased mortality, poor health, impaired cognitive development, slow physical growth, reduced learning capacity, inferior performance, and ultimately lower adult work performance and productivity. The consensus of global scientific evidence indicates that lowering the rates of malnutrition will be an indispensable component of any successful program to raise the quality of human capital and resources. This study used a “consequence model” to apply the coefficient risk-deficit on economic losses, established in the global scientific literature, to Cambodian health, demographic, and economic data to develop a national estimate of the value of economic losses due to malnutrition. The impact of the indicators of malnutrition analyzed represent a burden to the national economy of Cambodia estimated at 266 million USD annually (1.7% of GDP. Stunting is reducing the Cambodian economic output by more than 120 million USD, and iodine deficiency disorders alone by 57 million USD. This economic burden is too high in view of Cambodia’s efforts to drive economic development. The government should rapidly expand a range of low-cost effective nutrition interventions to break the current cycle of increased mortality, poor health and ultimately lower work performance, productivity, and earnings.

Ultimate justification: Wittgenstein and medical ethics.

Science.gov (United States)

Hughes, J

1995-02-01

Decisions must be justified. In medical ethics various grounds are given to justify decisions, but ultimate justification seems illusory and little considered. The philosopher Wittgenstein discusses the problem of ultimate justification in the context of general philosophy. His comments, nevertheless, are pertinent to ethics. From a discussion of Wittgensteinian notions, such as 'bedrock', the idea that 'ultimate' justification is grounded in human nature as such is derived. This discussion is relevant to medical ethics in at least five ways: it shows generally what type of certainty there is in practical ethics; it seems to imply some objective foundation to our ethical judgements; it squares with our experience of making ethical decisions; it shows something of the nature of moral arguments; and, finally, it has implications for teaching medicine and ethics.

Assessment on Ultimate Load of Cold-formed Steel Channel (CFSC Stub Column

Directory of Open Access Journals (Sweden)

Mohd Sani Mohd Syahrul Hisyam

2015-01-01

Full Text Available Cold-formed steel is used as the non-structural and structural material in civil engineering work and building. Cold-formed steel channel is selected and cut into 100 mm, 200 mm, 300 mm, 400 mm and 500 mm. The slenderness ratio is calculated and noted as a stub or short column because below 40. The column is tested by using Universal Testing Machine to determine the ultimate load of the stub column. Besides, the CFSC is determined the material properties of CFSC for checking it’s the originality of steel based material. The experimental data are tested and compared with the Direct Strength Method (DSM. It showed that the CFSC1 with a height of 100 mm is reported to have a higher value of ultimate load when compared with other samples. When the height of the stub column increased, the ultimate load of the sample is decreased. Then, the CFSC1 also showed a higher in initial stiffness when compared with other samples. All samples are shown having a higher data in ultimate load when compared with the Direct Strength Method prediction. The ultimate load of experimental and DSM all gave a ratio below 1.03. Finally, all samples can further recommend determining the relation between the ultimate loads with variations of height of the column.

Human Development and Economic Growth

OpenAIRE

Ranis, Gustav

2004-01-01

Recent literature has contrasted Human Development, described as the ultimate goal of the development process, with economic growth, described as an imperfect proxy for more general welfare, or as a means toward enhanced human development. This debate has broadened the definitions and goals of development but still needs to define the important interrelations between human development (HD) and economic growth (EG). To the extent that greater freedom and capabilities improve economic performan...

Ultimate capacity of piles penetrating in weak soil layers

Directory of Open Access Journals (Sweden)

Al-Obaidi Ahmed

2018-01-01

Full Text Available A pile foundation is one of the most popular forms of deep foundations. They are routinely employed to transfer axial structure loads through the soft soil to stronger bearing strata. Piles generally used to increase the load carrying capacity of the foundation and reduce the settlement of the foundation. On the other hand, many cases in practice where piles pass through different layers of soil that contain weak layers located at different depths and extension, also some time cavities with a different shape, size, and depth are found. In this study, a total of 96 cases is considered and simulated in PLAXIS 2D program aiming to understand the influence of weak soil on the ultimate pile capacity. The piles embedded in the dense sand with a layer of weak soil at different extension and location. The cross section of the geometry used in this study was designed as an axisymmetric model with the 15-node element; the boundary condition recommended at least 5D in the horizontal direction, and (L+5D in the vertical direction where D and L are the diameter and length of pile, respectively. The soil is modeled as Mohr-Coulomb, with five input parameters and the behavior of pile material represented by the linear elastic model. The results of the above cases are compared with the results found in a pile embedded in dense soil without weak layers or cavities. The results indicated that the existence of weak soil layer within the surrounding soil around the pile decreases the ultimate capacity. Furthermore, it has been found that increase in the weak soil width (extension leads to reduction in the ultimate capacity of the pile. This phenomenon is applicable to all depth of weak soil. The influence of weak layer extension on the ultimate capacity is less when it is presentin the upper soil layers.

Ultimate - a new generation of gasoline and diesel fuels; Ultimate - eine neue Generation von Otto- und Dieselkraftstoffen

Energy Technology Data Exchange (ETDEWEB)

Strempel, G. [Aral Forschung/Global Fuels Technology, Bochum (Germany); Beckwith, P. [BP Fuels Management Group, Pangbourne (United Kingdom); Froehling, J. [Aral Forschung, Bochum (Germany). Labor/Analytik; Baron, U. [Aral Forschung, Bochum (Germany). Motor- und Fahrzeuglaboratorium; Sauermann, P.; Balfanz, U. [Aral Forschung, Bochum (Germany). Produktentwicklung; Doermer, W. [Aral Forschung, Bochum (Germany). Produktqualitaet

2005-06-01

With the launch of Ultimate 100 gasoline and Ultimate Diesel, motorists in Germany now have the opportunity to choose new advanced performance fuels designed to get the very best from their engines. This article gives details of the technical development behind these fuels, their wide range of benefits, and how it is possible to manufacture fuels which meet the considerable technical challenge of achieving both more performance and less pollution. (orig.)

Ultimate stress increase in unbonded tendons in post-tensioned indeterminate I-beams cast with high strength normal and self compacting concrete

Directory of Open Access Journals (Sweden)

Yousef Askari Dolatabad

2018-06-01

Full Text Available The use of un-bonded tendons is prevalent in post-tensioned concrete structures. Equations for prediction of stress in un-bonded tendons of post-tensioned normal (vibrating concrete flexural members have been given in various codes. They are based on experience and don’t account all of important parameters such as concrete strength (normal and high strength and its type (vibrating and non-vibrating concrete. Since self-compacting concrete (SCC is nearly a new innovation therefore, understanding the implementation of this type of non-vibrating concrete on the ultimate unbonded tendon stress is critical. For this aim, in this paper there are presented experimental results of six continuous un-bonded post-tensioned I-beams in two groups were casted and monitored by different electrical strain gauges. In the first tested group, the beams (UPN1-12, UPN1-18, UPN1-22 were consisting of high strength normal concrete (HSNC where as in the second group (UPS1-12, UPS1-18, UPS1-22 high strength self-compacting concrete (HSSCC were tested. The variables included the type of concrete and percentage of bounded non-prestressed steel. Experimental monitored results of ultimate stress increase in unbonded tendons are compared with predicted equations of different researchers and standards. It was found that, the proposed equation is in better agreement with the test results. The results of standard error of estimate Sy/x, indicates that for two types of HSCs, the ACI 318-2011 provides better estimates than AASHTO-2010 model whereas this model provides better estimates than BS 8110-97. Keywords: Post-tensioned, Unbonded tendons, Stress increase, High strength normal and self-compacting concrete, Continuous beams

Revisiting perceptions of quality of hospice care: managing for the ultimate referral.

Science.gov (United States)

Churchman, Richard; York, Grady S; Woodard, Beth; Wainright, Charles; Rau-Foster, Mary

2014-08-01

Hospice services provided in the final months of life are delivered through complex interpersonal relationships between caregivers, patients, and families. Often, service value and quality are defined by these interpersonal interactions. This understanding provides hospice leaders with an enormous opportunity to create processes that provide the optimal level of care during the last months of life. The authors argue that the ultimate referral is attained when a family member observes the care of a loved one, and the family member conveys a desire to receive the same quality of services their loved one received at that facility. The point of this article is to provide evidence that supports the methods to ultimately enhance the patient's and family's experience and increase the potential for the ultimate referral. © The Author(s) 2013.

Ultimate disposal of radioactive wastes

International Nuclear Information System (INIS)

Roethemeyer, H.

1991-01-01

The activities developed by the Federal Institution of Physical Engineering PTB and by the Federal Office for Radiation Protection (BfS) concentrated, among others, on work to implement ultimate storage facilities for radioactive wastes. The book illuminates this development from site designation to the preliminary evaluation of the Gorleben salt dome, to the preparation of planning documents proving that the Konrad ore mine is suitable for a repository. The paper shows the legal provisions involved; research and development tasks; collection of radioactive wastes ready for ultimate disposal; safety analysis in the commissioning and post-operational stages, and product control. The historical development of waste management in the Federal Republic of Germany and international cooperation in this area are outlined. (DG) [de

THE ROLE OF INTERNATIONAL INNOVATION CLUSTERS ON INCREASING ECONOMIC AGENTS SUSTAINABILITY

Directory of Open Access Journals (Sweden)

M. Ustymenko

2014-09-01

Full Text Available The influence of enterprises integration into international innovation clusters on the increasing of enterprises, countries and regions economic sustainability under the global instability are explored. Potential sources of instability and threats of the integration into international cluster structures are defined. Author outlines the main benefits of international innovation cluster for enhancement of economic agents sustainability, such as: possibility for joint exploitation of market opportunities and efforts consolidation for overcoming market threats, cluster self-sufficiency, effective cluster internal reorganization and adaptation in response to external changes. Three clusters (engineering for agriculture production cluster (Hersonska oblast and German enterprises, IT cluster (Lvivska oblast and Poland enterprises, cluster for R&D commercialization (Slobodzanschina euroregion are examined to uncover the role of international innovation cluster formation on enhancement of economic agents' economic sustainability.

The Financial Regulation of the Country’s Economic Development

Directory of Open Access Journals (Sweden)

Davydova Irina I.

2017-12-01

Full Text Available The article is aimed at disclosing the essence of the system of financial regulation of economic development of the country, defining institutional foundations in the process of development of financial mechanism. Approaches to strengthening the efficiency of financial policy as an important economic institution, which should significantly influence economic growth, have been developed. The directions of increase of efficiency of budget policy in conditions of institutional changes have been defined. Currently, financial regulation of the country is being formed in the context of socio-economic policy, which is resulting from the need for the State participation in the world economic and financial relations, for improving the quality of public services on the part of the State, which requires the implementation of a strategy of economic growth at a qualitatively new institutional level. The State financial policy should ultimately focus on the appropriate endogenous factors of economic growth. In modern conditions it is expedient to strengthen the role of financial policy as a significant macro-economic instrument, which provides an effective influence on achievement of financial and economic balance, efficiency of economic transformations.

Management of intellectual capital and its influence on personnel economic performance

Directory of Open Access Journals (Sweden)

mahmoud Gholami Karin

2016-02-01

Full Text Available Studies have shown that, knowledge is an effective source for increasing personnel economic performance. Basically, managers of companies by considering prevailing economic conditions are forced to correct and improve methods of production, marketing, and innovation and ultimately increase economic productivity. One of the main ways to improve economic growth and increase competitive advantage, for factories is the use of creative thinking that it without the recognition and management of intellectual capitals will not be possible. The main objective of present research is to study the influence of intellectual capital components on economic performance of companies working in Saipa Automotive Manufacturing Group. Also determine relation between components of intellectual capital together. Components of intellectual capital (human, structural, and relational capital are independent variables and personnel economic performance is considered as a dependent variable. Multiple regression analysis has used for study the influence of components of intellectual capital on personnel economic performance. For test of relation between components of intellectual capital together, have used Pearson correlation analysis and for test of model has used structural equation modeling. The collected data were analyzed with the SPSS and Lisrel software, and finally the relationship between intellectual capital components were confirmed and it has been determined that relational and structural capital directly and human capital, indirectly, impress personnel economic performance in Saipa Automotive Manufacturing Group.

Ultimate fate of constrained voters

International Nuclear Information System (INIS)

Vazquez, F; Redner, S

2004-01-01

We examine the ultimate fate of individual opinions in a socially interacting population of leftists, centrists and rightists. In an elemental interaction between agents, a centrist and a leftist can both become centrists or both become leftists with equal rates (and similarly for a centrist and a rightist). However leftists and rightists do not interact. This interaction step between pairs of agents is applied repeatedly until the system can no longer evolve. In the mean-field limit, we determine the exact probability that the system reaches consensus (either leftist, rightist or centrist) or a frozen mixture of leftists and rightists as a function of the initial composition of the population. We also determine the mean time until the final state is reached. Some implications of our results for the ultimate fate in a limit of the Axelrod model are discussed

Ultimate fate of constrained voters

Energy Technology Data Exchange (ETDEWEB)

Vazquez, F [Department of Physics, Center for BioDynamics, Boston University, Boston, MA 02215 (United States); Redner, S [Department of Physics, Center for Polymer Studies, Boston University, Boston, MA 02215 (United States)

2004-09-03

We examine the ultimate fate of individual opinions in a socially interacting population of leftists, centrists and rightists. In an elemental interaction between agents, a centrist and a leftist can both become centrists or both become leftists with equal rates (and similarly for a centrist and a rightist). However leftists and rightists do not interact. This interaction step between pairs of agents is applied repeatedly until the system can no longer evolve. In the mean-field limit, we determine the exact probability that the system reaches consensus (either leftist, rightist or centrist) or a frozen mixture of leftists and rightists as a function of the initial composition of the population. We also determine the mean time until the final state is reached. Some implications of our results for the ultimate fate in a limit of the Axelrod model are discussed.

Ultimate Lateral Capacity of Rigid Pile in c- φ Soil

Science.gov (United States)

Zhang, Wei-min

2018-03-01

To date no analytical solution of the pile ultimate lateral capacity for the general c- φ soil has been obtained. In the present study, a new dimensionless embedded ratio was proposed and the analytical solutions of ultimate lateral capacity and rotation center of rigid pile in c- φ soils were obtained. The results showed that both the dimensionless ultimate lateral capacity and dimensionless rotation center were the univariate functions of the embedded ratio. Also, the ultimate lateral capacity in the c- φ soil was the combination of the ultimate lateral capacity ( f c ) in the clay, and the ultimate lateral capacity ( f φ ) in the sand. Therefore, the Broms chart for clay, solution for clay ( φ=0) put forward by Poulos and Davis, solution for sand ( c=0) obtained by Petrasovits and Awad, and Kondner's ultimate bending moment were all proven to be the special cases of the general solution in the present study. A comparison of the field and laboratory tests in 93 cases showed that the average ratios of the theoretical values to the experimental value ranged from 0.85 to 1.15. Also, the theoretical values displayed a good agreement with the test values.

ECONOMIC INTELLIGENCE - THEORETICAL AND PRACTICAL ASPECTS

Directory of Open Access Journals (Sweden)

VIRGIL - ION POPOVICI

2014-12-01

Full Text Available Economic Intelligence (EI may be a solution in knowledge management as involves collecting, evaluating, processing, analysis and dissemination of economic data within organizations. The ultimate goal of economic intelligence (EI is to take advantage of this opportunity to develop and improve methods for identifying relevant information sources, analysis of information collected and manipulation, to give the user all the necessary decisions. Scope of the Economic Intelligence focused on information available outside the organization, covering wide areas from technology to market or legal issues. Economic Intelligence (EI is closely related to other approaches to information management, and knowledge management and business intelligence, excelling in the use of software tools.

Income Inequality Explains Why Economic Growth Does Not Always Translate to an Increase in Happiness.

Science.gov (United States)

Oishi, Shigehiro; Kesebir, Selin

2015-10-01

One of the most puzzling social science findings in the past half century is the Easterlin paradox: Economic growth within a country does not always translate into an increase in happiness. We provide evidence that this paradox can be partly explained by income inequality. In two different data sets covering 34 countries, economic growth was not associated with increases in happiness when it was accompanied by growing income inequality. Earlier instances of the Easterlin paradox (i.e., economic growth not being associated with increasing happiness) can thus be explained by the frequent concurrence of economic growth and growing income inequality. These findings suggest that a more even distribution of growth in national wealth may be a precondition for raising nationwide happiness. © The Author(s) 2015.

Economic Impact of Tobacco Price Increases Through Taxation: A Community Guide Systematic Review.

Science.gov (United States)

Contreary, Kara A; Chattopadhyay, Sajal K; Hopkins, David P; Chaloupka, Frank J; Forster, Jean L; Grimshaw, Victoria; Holmes, Carissa B; Goetzel, Ron Z; Fielding, Jonathan E

2015-11-01

Tobacco use is a leading cause of preventable death in the U.S. and around the world. Increasing tobacco price through higher taxes is an effective intervention both to reduce tobacco use in the population and generate government revenues. The goal of this paper is to review evidence on the economic impact of tobacco price increases through taxation with a focus on the likely healthcare cost savings and improvements in employee productivity. The search covered studies published in English from January 2000 to July 2012 and included evaluations of national, state, and local policies to increase the price of any type of tobacco product by raising taxes in high-income countries. Economic review methods developed for The Guide to Community Preventive Services were used to screen and abstract included studies. Economic impact estimates were standardized to summarize the available evidence. Analyses were conducted in 2012. The review included eight modeling studies, with seven providing estimates of the impact on healthcare costs and three providing estimates of the value of productivity gains. Only one study provided an estimate of intervention costs. The economic merit of tobacco product price increases through taxation was determined from the overall body of evidence on per capita annual cost savings from a conservative 20% price increase. The evidence indicates that interventions that raise the unit price of tobacco products through taxes generate substantial healthcare cost savings and can generate additional gains from improved productivity in the workplace. Published by Elsevier Inc.

Ultimate Educational Aims, Overridingness, and Personal Well-Being

Science.gov (United States)

Haji, Ishtiyaque; Cuypers, Stefaan E.

2011-01-01

Discussion regarding education's aims, especially its ultimate aims, is a key topic in the philosophy of education. These aims or values play a pivotal role in regulating and structuring moral and other types of normative education. We outline two plausible strategies to identify and justify education's ultimate aims. The first associates these…

Public Expenditure On Education And Economic Growth In Nigeria ...

African Journals Online (AJOL)

No doubt, human resources constitute the ultimate basis for the wealth of nations. Capital and natural resources are passive factors of production; human beings are the active agents who accumulate capital, exploit natural resources, build social, economic and political organization for sustainable economic development.

Economical Feedback of Increasing Fuel Enrichment on Electricity Cost for VVER-1000

Directory of Open Access Journals (Sweden)

Mohammed Saad Dwiddar

2015-08-01

Full Text Available A methodology of evaluating the economics of the front-end nuclear fuel cycle with a price change sensitivity analysis for a VVER-1000 reactor core as a case study is presented. The effect of increasing the fuel enrichment and its corresponding reactor cycle length on the energy cost is investigated. The enrichment component was found to represent the highly expenses dynamic component affecting the economics of the front-end fuel cycle. Nevertheless, the increase of the fuel enrichment will increase the reactor cycle length, which will have a positive feedback on the electricity generation cost (cent/KWh. A long reactor operation time with a cheaper energy cost set the nuclear energy as a competitive alternative when compared with other energy sources.

Protein and glucogenic precursor supplementation: a nutritional strategy to increase reproductive and economic output.

Science.gov (United States)

Mulliniks, J T; Cox, S H; Kemp, M E; Endecott, R L; Waterman, R C; Vanleeuwen, D M; Torell, L A; Petersen, M K

2011-10-01

Reproductive performance in young beef cows is often compromised due to a mismatch of physiological demands and suboptimal environmental conditions. Studies conducted at the Corona Range and Livestock Research Center from 2000 to 2007 evaluated 3 postpartum supplement strategies that varied in the amount of glucogenic potential (GP) supplied. Reproductive variables, milk production, and serum metabolites were used to assess supplement effectiveness and economics associated with 2- and 3-yr-old beef cows (n = 379) grazing native range. Supplements were individually fed twice/week at 1,135 g/d (2003 to 2004) or 908 g/d (all other years) and provided 1) 327 g of CP, 109 to 118 g of RUP (CON); 2) 327 to 341 g of CP, 142 to 157 g of RUP (RUP); or 3) 327 g of CP, 151 to 173 g of RUP + 40 to 100 g of propionate salt (PS; RUP+PS). Ultimately, total GP for CON, RUP, and RUP+PS was 44 to 47, 57 to 70, and 93 to 141 g, respectively. Blood samples were collected once/week (2000) or twice/week (2001 to 2007) for progesterone analysis to estimate days to resumption of estrus. Cows were exposed to bulls for 60 d or less, and pregnancy was confirmed by rectal palpation at weaning. Days to resumption of estrus after calving decreased linearly (P = 0.02), resulting in an increased pregnancy rate (P = 0.03) with increasing GP. Milk production exhibited a quadratic (P = 0.04) response to increasing GP, with cows fed RUP producing the most amount of milk. However, a linear decrease (P = 0.07) in days from BW nadir to estrus was found with increasing GP. Total kilograms of calf weaned per cow exposed for the supplemental year and subsequent year was increased linearly (P = 0.07) with increased GP. The improvement in pregnancy rate by supplementing RUP+PS resulted in an increase in total revenue of 18% compared with CON-fed cows and 9.5% compared with RUP-fed cows in the subsequent year after supplementation. These data suggest feeding young cows additional GP in the form of PS allows

Economic potential of inertial fusion

International Nuclear Information System (INIS)

Nuckolls, J.H.

1984-04-01

Beyond the achievement of scientific feasibility, the key question for fusion energy is: does it have the economic potential to be significantly cheaper than fission and coal energy. If fusion has this high economic potential then there are compelling commercial and geopolitical incentives to accelerate the pace of the fusion program in the near term, and to install a global fusion energy system in the long term. Without this high economic potential, fusion's success depends on the failure of all alternatives, and there is no real incentive to accelerate the program. If my conjectures on the economic potential of inertial fusion are approximately correct, then inertial fusion energy's ultimate costs may be only half to two-thirds those of advanced fission and coal energy systems. Relative cost escalation is not assumed and could increase this advantage. Both magnetic and inertial approaches to fusion potentially have a two-fold economic advantage which derives from two fundamental properties: negligible fuel costs and high quality energy which makes possible more efficient generation of electricity. The wining approach to fusion may excel in three areas: electrical generating efficiency, minimum material costs, and adaptability to manufacture in automated factories. The winning approach must also rate highly in environmental potential, safety, availability factor, lifetime, small 0 and M costs, and no possibility of utility-disabling accidents

Experimental investigation of ultimate loads

Energy Technology Data Exchange (ETDEWEB)

Petersen, S M; Larsen, G C; Antoniou, I; Lind, S O; Courtney, M [Risoe National Lab., Wind Energy and Atmospheric Physics, Roskilde (Denmark)

1999-03-01

Verification of the structural integrity of a wind turbine involves analysis of fatigue loading as well as ultimate loading. With the trend of persistently growing turbines, the ultimate loading seems to become relatively more important. For wind turbines designed according to the wind conditions prescribed in the IEC-61400 code, the ultimate load is often identified as the leading load parameter. Exemplified by the use of an extensive measurement campaign a procedure for evaluation of the extreme flap-wise bending moments, occurring during normal operating of a wind turbine, is presented. The structural measurements are made on a NEG Micon 650 kW wind turbine erected at a complex high wind site in Oak Creek, California. The turbine is located on the top of a ridge. The prevailing wind direction is perpendicular to the ridge, and the annual mean wind speed is 9.5 m/s. The associated wind field measurement, are taken from two instrumented masts erected less than one rotor diameter in front of the turbine in direction of the prevailing wind direction. Both masts are instrumented at different heights in order to gain insight of the 3D-wind speed structure over the entire rotor plane. Extreme distributions, associated with a recurrence period of 10 minutes, conditioned on the mean wind speed and the turbulence intensity are derived. Combined with the wind climate model proposed in the IEC standard, these distributions are used to predict extreme distributions with recurrence periods equal to one and fifty years, respectively. The synthesis of the conditioned PDF`s and the wind climate model is performed by means of Monte Carlo simulation. (au)

Ultimate internal pressure capacity of concrete containment structures

International Nuclear Information System (INIS)

Krishnaswamy, C.N.; Namperumal, R.; Al-Dabbagh, A.

1983-01-01

Lesson learned from the accident at Three-Mile Island nuclear plant has necessitated the computation of the ultimate internal pressure capacity of containment structures as a licensing requirement in the U.S. In general, a containment structure is designed to be essentially elastic under design accident pressure. However, as the containment pressure builds up beyond the design value due to a more severe postulated accident, the containment response turns nonlinear as it sequentially passes through cracking of concrete, yielding of linear plate, yielding of rebar, and yielding of post-tensioning tendon (if the containment concrete is prestressed). This paper reports on the determination of the ultimate internal pressure capacity and nonlinear behavior of typical reinforced and prestressed concrete BWR containments. The probable modes of failure, the criteria for ultimate pressure capacity, and the most critical sections are described. Simple equations to hand-calculate the ultimate pressure capacity and the nonlinear behavior at membrane sections of the containment shell are presented. A nonlinear finite element analysis performed to determine the nonlinear behavior of the entire shell including nonmembrane sections is briefly discribed. The analysis model consisted of laminated axisymmetric shell finite elements with nonlinear stress-strain properties for each material. Results presented for typical BWR concrete containments include nonlinear response plots of internal pressure versus containment deflection and strains in the liner, rebar, and post-tensioning tendons at the most stressed section in the shell. Leak-tightness of the containment liner and the effect of thermal loads on the ultimate capacity are discussed. (orig.)

Ultimate load capacity assessment of reinforced concrete shell structures

International Nuclear Information System (INIS)

Gupta, Amita; Singh, R.K.; Kushwaha, H.S.; Mahajan, S.C.; Kakodkar, A.

1993-01-01

The objective of this study is to develop capability for prediction of ultimate load capacity of reinforced concrete shell structures. The present finite element code ULCA (Ultimate Load Capacity Assessment) adopts a degenerate concept of formulating general isoparametric shell element with a layered approach in the thickness direction. Different failure modes such as crushing, tensile cracking and reinforcement yielding are recognised for various problems. The structure fails by crushing of concrete when the concrete strain/stress reaches the ultimate stress or strain of concrete. Material nonlinearities as a result of tension cracking, tension stiffening between reinforcement and concrete in cracked region and yielding of reinforcement are considered along with geometric nonlinearity. Thus with this code it is possible to predict the pressure at which the first cracking, first through thickness cracking, first yielding of reinforcement occurs. After validating the code with few bench mark problems for different failure modes a reinforced concrete nuclear containment is analysed for its ultimate capacity and the results are matched with the published results. Further the ultimate load capacity of outer containment wall of Narora Atomic Power Station is predicted. It is observed that containment fails in membrane region and has a sufficient margin against design pressure. (author). 9 refs., 56 figs., 3 tabs., 1 appendix with 4 tabs

Sensitivity analysis on ultimate strength of aluminium stiffened panels

DEFF Research Database (Denmark)

Rigo, P.; Sarghiuta, R.; Estefen, S.

2003-01-01

This paper presents the results of an extensive sensitivity analysis carried out by the Committee III.1 "Ultimate Strength" of ISSC?2003 in the framework of a benchmark on the ultimate strength of aluminium stiffened panels. Previously, different benchmarks were presented by ISSC committees on ul...

Energy consumption and economic development after the energy price increases of 1973

International Nuclear Information System (INIS)

Danielewski, J.

1993-01-01

The interdependence between energy consumption and economic development are highlighted in this research, which focuses on energy price rises between 1973 and 1989. Three groups of countries are identified, developing and developed market economies and centrally planned economies. Two areas of interdependence are examined, firstly the dynamic relationship between primary energy consumption growth and real economic growth and secondly the static relationship between primary energy consumption and national income. In the period under review, developing market economies reacted most strongly to higher energy prices, with lower energy consumption while maintaining real growth in the Gross Domestic Product. However developing countries and centrally planned economies increased their energy consumption per unit of national income although the rate of increase slowed after 1975. (UK)

Increasing the Economical Efficiency and Sustainability of Indoor Fish Farming by Means of Aquaponics - Review

Directory of Open Access Journals (Sweden)

Flavius Blidariu

2011-10-01

Full Text Available This review focuses on increasing economical efficiency and sustainability of indoor fish farming. Aspects like sustainability and economical efficiency were reviewed. In order to improve man`s health we must reconsider the agricultural sciences, by this we understand that we must develop technologies friendly for the environment. Sustainable indoor fish farming is the farming of the new millennium. Combining aquaculture with hydroponics we obtain a new innovation named aquaponics which respects principles of sustainable agriculture (wastewater biofiltration by plants and gives us the possibility to increase economical efficiency with an additional production (organic vegetables.

Economic expansion and increase in labout market formality: a poaching approach

Directory of Open Access Journals (Sweden)

Carlos Henrique L. Corseuil

2012-06-01

Full Text Available This paper investigates the relationship between economic expansion and the degree of formalization for the Brazilian labour market in the recent period. We present a theoretical framework that attempts to explain this relationship through the dynamics of firms hiring strategies. The main predictions are: the share of formal employment rises as the unemployment rate falls, and that the formal-informal wage gap increases, at least at the beginning of the economic expansion. In the empirical part, we use longitudinal microdata from a Brazilian household survey to check whether these two predictions are confirmed. To a large extent our results corroborate both predictions.

Environmental economics of lignin derived transport fuels

OpenAIRE

Obydenkova, SV; Kouris, P Panagiotis; Hensen, EJM Emiel; Heeres, Hero J; Boot, MD Michael

2017-01-01

This paper explores the environmental and economic aspects of fast pyrolytic conversion of lignin, obtained from 2G ethanol plants, to transport fuels for both the marine and automotive markets. Various scenarios are explored, pertaining to aggregation of lignin from several sites, alternative energy carries to replace lignin, transport modalities, and allocation methodology. The results highlight two critical factors that ultimately determine the economic and/or environmental fuel viability....

Economic repercussions of OPEC's crude oil price increases

Energy Technology Data Exchange (ETDEWEB)

Merklein, H A

1980-05-01

Accusations that the Organization of Petroleum Exporting Countries (OPEC) created the world energy crisis and destroyed the economies of oil-importing nations are challenged by Dr. Merklein. He shows that the economic impact of OPEC price increases have only accelerated an already-developing energy shortage and only reflect the existing problems of inflation, unemployment, and declining currency exchange rates. The real problem is argued to be a US energy policy that is incapable of responding appropriately to what should be a manageable crude oil tax. When the arguments against OPEC policies are examined in an historical context, they are shown to be essentially neutral. 4 tables. (DCK)

Ultimate Strength of Ship Hulls under Torsion

DEFF Research Database (Denmark)

Paik, Jeom Kee; Thayamballi, Anil K.; Pedersen, Preben Terndrup

2001-01-01

For a ship hull with large deck openings such as container vessels and some large bulk carriers, the analysis of warping stresses and hatch opening deformations is an essential part of ship structural analyses. It is thus of importance to better understand the ultimate torsional strength characte......For a ship hull with large deck openings such as container vessels and some large bulk carriers, the analysis of warping stresses and hatch opening deformations is an essential part of ship structural analyses. It is thus of importance to better understand the ultimate torsional strength...... characteristics of ships with large hatch openings. The primary aim of the present study is to investigate the ultimate strength characteristics of ship hulls with large hatch openings under torsion. Axial (warping) as well as shear stresses are normally developed for thin-walled beams with open cross sections...... subjected to torsion. A procedure for calculating these stresses is briefly described. As an illustrative example, the distribution and magnitude of warping and shear stresses for a typical container vessel hull cross section under unit torsion is calculated by the procedure. By theoretical and numerical...

Economic Effects of Increased Control Zone Sizes in Conflict Resolution

Science.gov (United States)

Datta, Koushik

1998-01-01

A methodology for estimating the economic effects of different control zone sizes used in conflict resolutions between aircraft is presented in this paper. The methodology is based on estimating the difference in flight times of aircraft with and without the control zone, and converting the difference into a direct operating cost. Using this methodology the effects of increased lateral and vertical control zone sizes are evaluated.

Evaluation of Ultimate Pressure Capacity of a Prestressed Concrete Containment Building with Steel or Polyamide Fiber Reinforcement

Energy Technology Data Exchange (ETDEWEB)

Choun, Youngsun; Hahm, Daegi [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2014-05-15

Fiber reinforced concrete (FRC) includes thousands of small fibers that are distributed randomly in the concrete. Fibers resist the growth of cracks in concrete through their bridging at the cracks. Therefore, FRC fails in tension only when the fibers break or are pulled out of the cement matrix. For this reason, the addition of fibers in concrete mixing increases the tensile toughness of concrete and enhances the post-cracking behavior. A prevention of through-wall cracks and an increase of the post-cracking ductility will improve the ultimate internal pressure capacity of a prestressed concrete containment building (PCCB). In this study, the effects of steel or polyamide fiber reinforcement on the ultimate pressure capacity of a PCCB are evaluated. When R-SFRC contains hooked steel fibers in a volume fraction of 1.0%, the ultimate pressure capacity of a PCCB can be improved by 17%. When R-PFRC contains polyamide fibers in a volume fraction of 1.5%, the ultimate pressure capacity of a PCCB can be enhanced by 10%. Further studies are needed to determine the strain limits acceptable for PCCBs reinforced with fibers.

Evaluation of Ultimate Pressure Capacity of a Prestressed Concrete Containment Building with Steel or Polyamide Fiber Reinforcement

International Nuclear Information System (INIS)

Choun, Youngsun; Hahm, Daegi

2014-01-01

Fiber reinforced concrete (FRC) includes thousands of small fibers that are distributed randomly in the concrete. Fibers resist the growth of cracks in concrete through their bridging at the cracks. Therefore, FRC fails in tension only when the fibers break or are pulled out of the cement matrix. For this reason, the addition of fibers in concrete mixing increases the tensile toughness of concrete and enhances the post-cracking behavior. A prevention of through-wall cracks and an increase of the post-cracking ductility will improve the ultimate internal pressure capacity of a prestressed concrete containment building (PCCB). In this study, the effects of steel or polyamide fiber reinforcement on the ultimate pressure capacity of a PCCB are evaluated. When R-SFRC contains hooked steel fibers in a volume fraction of 1.0%, the ultimate pressure capacity of a PCCB can be improved by 17%. When R-PFRC contains polyamide fibers in a volume fraction of 1.5%, the ultimate pressure capacity of a PCCB can be enhanced by 10%. Further studies are needed to determine the strain limits acceptable for PCCBs reinforced with fibers

Economic analyses of LWR fuel cycles

International Nuclear Information System (INIS)

Field, F.R.

1977-05-01

An economic comparison was made of three options for handling irradiated light-water reactor (LWR) fuel. These options are reprocessing of spent reactor fuel and subsequent recycle of both uranium and plutonium, reprocessing and recycle of uranium only, and direct terminal storage of spent fuel not reprocessed. The comparison was based on a peak-installed nuclear capacity of 507 GWe by CY 2000 and retirement of reactors after 30 years of service. Results of the study indicate that: Through the year 2000, recycle of uranium and plutonium in LWRs saves about $12 billion (FY 1977 dollars) compared with the throwaway cycle, but this amounts to only about 1.3% of the total cost of generating electricity by nuclear power. If deferred costs are included for fuel that has been discharged from reactors but not reprocessed, the economic advantage increases to $17.7 billion. Recycle of uranium only (storage of plutonium) is approximately $7 billion more expensive than the throwaway fuel cycle and is, therefore, not considered an economically viable option. The throwaway fuel cycle ultimately requires >40% more uranium resources (U 3 O 8 ) than does reprocessing spent fuel where both uranium and plutonium are recycled

The ultimate disposition of depleted uranium

Energy Technology Data Exchange (ETDEWEB)

1990-12-01

Significant amounts of the depleted uranium (DU) created by past uranium enrichment activities have been sold, disposed of commercially, or utilized by defense programs. In recent years, however, the demand for DU has become quite small compared to quantities available, and within the US Department of Energy (DOE) there is concern for any risks and/or cost liabilities that might be associated with the ever-growing inventory of this material. As a result, Martin Marietta Energy Systems, Inc. (Energy Systems), was asked to review options and to develop a comprehensive plan for inventory management and the ultimate disposition of DU accumulated at the gaseous diffusion plants (GDPs). An Energy Systems task team, under the chairmanship of T. R. Lemons, was formed in late 1989 to provide advice and guidance for this task. This report reviews options and recommends actions and objectives in the management of working inventories of partially depleted feed (PDF) materials and for the ultimate disposition of fully depleted uranium (FDU). Actions that should be considered are as follows. (1) Inspect UF{sub 6} cylinders on a semiannual basis. (2) Upgrade cylinder maintenance and storage yards. (3) Convert FDU to U{sub 3}O{sub 8} for long-term storage or disposal. This will include provisions for partial recovery of costs to offset those associated with DU inventory management and the ultimate disposal of FDU. Another recommendation is to drop the term tails'' in favor of depleted uranium'' or DU'' because the tails'' label implies that it is waste.'' 13 refs.

78 FR 57408 - U.S. Customs and Border Protection 2013 East Coast Trade Symposium: “Increasing Economic...

Science.gov (United States)

2013-09-18

..., 2013. Maria Luisa Boyce, Senior Advisor for Private Sector Engagement, Executive Director, Office of... Protection 2013 East Coast Trade Symposium: ``Increasing Economic Competitiveness Through Global Partnership..., 2013. The theme for the 2013 East Coast Trade Symposium will be ``Increasing Economic Competitiveness...

Assessment and characterization of radioactive waste for ultimate storage

International Nuclear Information System (INIS)

Brennecke, P.; Warnecke, E.

1986-01-01

The waste specifications determined from site safety analyses define the requirements to be met by waste forms for ultimate storage. Product quality control is the process step ensuring compliance with the conditions to be met for ultimate storage. For this purpose, radionuclide inventory, fixation method, container type, waste form and quantity, and type of waste are the most significant items on the checking list. (DG) [de

Transition to the Ultimate Regime in Two-Dimensional Rayleigh-Bénard Convection

Science.gov (United States)

Zhu, Xiaojue; Mathai, Varghese; Stevens, Richard J. A. M.; Verzicco, Roberto; Lohse, Detlef

2018-04-01

The possible transition to the so-called ultimate regime, wherein both the bulk and the boundary layers are turbulent, has been an outstanding issue in thermal convection, since the seminal work by Kraichnan [Phys. Fluids 5, 1374 (1962), 10.1063/1.1706533]. Yet, when this transition takes place and how the local flow induces it is not fully understood. Here, by performing two-dimensional simulations of Rayleigh-Bénard turbulence covering six decades in Rayleigh number Ra up to 1 014 for Prandtl number Pr =1 , for the first time in numerical simulations we find the transition to the ultimate regime, namely, at Ra*=1013 . We reveal how the emission of thermal plumes enhances the global heat transport, leading to a steeper increase of the Nusselt number than the classical Malkus scaling Nu ˜Ra1 /3 [Proc. R. Soc. A 225, 196 (1954), 10.1098/rspa.1954.0197]. Beyond the transition, the mean velocity profiles are logarithmic throughout, indicating turbulent boundary layers. In contrast, the temperature profiles are only locally logarithmic, namely, within the regions where plumes are emitted, and where the local Nusselt number has an effective scaling Nu ˜Ra0.38 , corresponding to the effective scaling in the ultimate regime.

Herbert A. Simon: Nobel Prize in Economic Sciences, 1978.

Science.gov (United States)

Leahey, Thomas H

2003-09-01

In 1978, Herbert A. Simon won the Nobel Prize in Economic Sciences, the same Nobel won by Daniel Kahneman in 2002. Simon's work in fact paved the way for Kahneman's Nobel. Although trained in political science and economics rather than psychology, Simon applied psychological ideas to economic theorizing. Classical and neoclassical economic theories assume that people are perfectly rational and strive to optimize economic outcomes. Simon argued that human rationality is constrained, not perfect, and that people seek satisfactory rather than ideal outcomes. Despite his Nobel, Simon felt isolated in economics and ultimately moved into psychology. Nevertheless, his ideas percolated through the economic community, so that Kahneman, whose research advanced Simon's broad perspective, could be the psychologist who won the Nobel in economics.

Internship – tool for improving the employability of Economic Science graduates

Directory of Open Access Journals (Sweden)

Silvia SUMEDREA

2016-07-01

Full Text Available Romania's economy has undergone major changes as a result of various technological, economic and social factors, so that the labor market has undergone major changes too, which puts more acute the problem of youth employability. The article presents the results of a project to develop human resources financed by European Union funds aimed at improving the way students realize internship, the ultimate goal of implementation of the project being to accustom students with employers' demands and rigors of a job to thus contribute to increasing the employability of future graduates of economic studies. Internship results are presented by taking into account the students’ opinions and some suggestions are made in order to improve this activity in the future.

Influence of initial imperfections on ultimate strength of spherical shells

Directory of Open Access Journals (Sweden)

Chang-Li Yu

2017-09-01

Full Text Available Comprehensive consideration regarding influence mechanisms of initial imperfections on ultimate strength of spherical shells is taken to satisfy requirement of deep-sea structural design. The feasibility of innovative numerical procedure that combines welding simulation and non-linear buckling analysis is verified by a good agreement to experimental and theoretical results. Spherical shells with a series of wall thicknesses to radius ratios are studied. Residual stress and deformations from welding process are investigated separately. Variant influence mechanisms are discovered. Residual stress is demonstrated to be influential to stress field and buckling behavior but not to the ultimate strength. Deformations are proved to have a significant impact on ultimate strength. When central angles are less than critical value, concave magnitudes reduce ultimate strengths linearly. However, deformations with central angles above critical value are of much greater harm. Less imperfection susceptibility is found in spherical shells with larger wall thicknesses to radius ratios.

FINANCIAL-ECONOMIC INTEGRATION AS A TOOL FOR INCREASE OF INVESTMENT SUPPORT OF AGRO-INDUSTRIAL PRODUCTION

Directory of Open Access Journals (Sweden)

E. R. Zakirova

2017-01-01

Full Text Available The article reveals the essence and systematizes the advantages of financial and economic integration. In the agro-industrial complex, this kind of integration contributes to attracting investments and reducing risks for investors, increasing the competitiveness and economic growth of the region. The relevance of the study is due to insufficiently researched remains many aspects of the functioning of integrated business systems in relation to individual industries, in particular, to agroindustrial production. The aim of the article is to study theoretical approaches to the essence of financial and economic integration in agro-industrial production and analyze the mechanism of investment support for the Russian agrarian sector, taking into account financial and economic integration. In preparing the article, general scientific methods of research were used: analysis and synthesis, generalization, comparison, classification. Results. The interpretation of financial and economic integration in Russian and foreign scientific publications is generalized. Distinctions of financial and economic integration are distinguished from other economic processes. The advantages of financial and economic integration for the economy and business entities are systematized. The importance of integrating industries and business entities in the agro-industrial complex, which is of strategic importance for ensuring Russia's food security, was noted. The branch structure of the agro-industrial complex is analyzed. The scheme of the integrated financial and economic mechanism in the agroindustrial complex is described. The importance of an optimal balance between cooperation and integration was underscored. The insufficiency of the methodological level of studies of agro-industrial integration is grounded. The components of the effect of financial and economic integration are considered. Positive effects of integration processes in the agroindustrial complex are

Ultimate pressure capacity of CANDU 6 containment structures

International Nuclear Information System (INIS)

Radulescu, J.P.; Pradolin, L.; Mamet, J.C.

1997-01-01

This paper summarizes the analytical work carried out and the results obtained when determining the ultimate pressure capacity (UPC) of the containment structures of CANDU 6 nuclear power plants. The purpose of the analysis work was to demonstrate that such containment structures are capable of meeting design requirements under the most severe accident conditions. For this concrete vessel subjected to internal pressure, the UPC was defined as the pressure causing through cracking in the concrete. The present paper deals with the overall behaviour of the containment. The presence of openings, penetrations and the ultimate pressure of the airlocks were considered separately. (author)

Goals, ways and the roots of our economic crisis

Directory of Open Access Journals (Sweden)

Bob Goudzwaard

2014-08-01

Full Text Available This article deals with the question if and how far religious points of view and messages of churches involved matter in the analysis of the roots of the present global economic crisis, and even more in the discussion about how to overcome the crisis itself. Economic experts such as Stiglitz point to the presence of factors such as greed, fear and utmost selfish behaviour. It inevitably leads to the ethical, but in fact also the religious question of how far people, especially economic agents, can go in the pursuit of their own economic interests without doing harm to others. Jesus asked his disciples to follow him: with Bonhoeffer, we could call that a Way-orientation. Where and how far can a conflict therefore arise between human goal-orientations, on the one hand, and a biblical Way-orientation, on the other hand? And is it indeed relevant when considering our present economic crisis? This article defends the last position, describing some categories (such as the choice of ultimate meaning, the sacro-sanctity of chosen instruments, and the demonisation of opponents which indicate that the borderline has been passed between responsible and irresponsible goal-orientations. The glorification of greed and the delegation of ultimate power to financial markets indicate that at this moment elements of idolatry (or the obedience to Mammon are at hand. They are also aggravating the present economic crisis. This implies that returning to the choice for decisive normative Way-orientations in economic life is possibly the only true way out of the present economic crisis.

Economic impacts of invasive species in forest past, present, and future

Science.gov (United States)

Thomas P. Holmes; Juliann E. Aukema; Betsy Von Holle; Andrew Liebhold; Erin Sills

2009-01-01

Biological invasions by nonnative species are a by-product of economic activities, with the vast majority of nonnative species introduced by trade and transport of products and people. Although most introduced species are relatively innocuous, a few species ultimately cause irreversible economic and ecological impacts, such as the chestnut blight that functionally...

Strong economic growth driving increased electricity consumption

International Nuclear Information System (INIS)

Tiusanen, P.

2000-01-01

The Finnish economy is growing faster today than anyone dared hope only a few years ago. Growth estimates for 2000 have already had to be raised. This strong level of economic growth has been reflected in electricity consumption, which has continued to increase, despite the exceptionally warm winter. A major part of this increased electricity usage has so far been met through imports. The continued growth in electricity imports has largely been a result of the fact that the good water level situation in Sweden and Norway, together with the mild winter, has kept electricity prices exceptionally low on the Nordic electricity exchange. The short period of low temperatures seen at the end of January showed, however, that this type of temperature fluctuation, combined with the restrictions that exist in regard to transfer capacity, can serve to push Nordic exchange electricity prices to record levels. This increase in price also highlights the fact that we are approaching a situation in which capacity will be insufficient to meet demand. A truly tough winter has not been seen since the Nordic region's electricity markets were deregulated. The lesson that needs to be learnt is that Finland needs sufficient capacity of her own to meet demand even during particularly cold winters. Finland used 77.9 billion kWh of electricity last year, up 1.6% or 1.3 billion kWh on 1998. This growth was relatively evenly distributed among different user groups. This year, electricity consumption is forecast to grow by 2-3%

13 CFR 123.19 - May I request an increase in the amount of an economic injury loan?

Science.gov (United States)

2010-01-01

... amount of an economic injury loan? 123.19 Section 123.19 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION DISASTER LOAN PROGRAM Overview § 123.19 May I request an increase in the amount of an economic... increase is essential for your business to continue and is based on events occurring after SBA approved...

Ecological economics and economic growth.

Science.gov (United States)

Victor, Peter A

2010-01-01

Boulding's 1966 paper on the economics of spaceship Earth established the framework for ecological economics and an understanding of economic growth. In ecological economics, economies are conceptualized as open subsystems of the closed biosphere and are subject to biophysical laws and constraints. Economic growth measured as an increase in real gross domestic product (GDP) has generally been associated with increases in the use of energy and materials and the generation of wastes. Scale, composition, and technology are the proximate determinants of environmental impacts. They are often reduced to two: scale (GDP) and intensity (impact per unit GDP). New work described in this paper defines "green" growth as intensity that declines faster than scale increases. Similarly, "brown" growth occurs when intensity declines more slowly than increases in scale, and "black" growth happens when both scale and intensity increase. These concepts are then related to the environmental Kuznets curve, which can be understood as a transition from brown to green growth. Ecological economics provides a macroperspective on economic growth. It offers broad policy principles, and it challenges the primacy of economic growth as a policy objective, but many important questions remain.

Economic Reform Orchestra And Technical Manpower Development ...

African Journals Online (AJOL)

The study examined economic reform issues in Nigeria since 1986 and the impact on technical manpower development in Rivers State in particular. Two sets of structured questionnaire were used to elicit responses from target respondents who ultimately comprised 105 instructors and 340 final year students in the four ...

Ultimate guide to YouTube for business

CERN Document Server

2018-01-01

Ultimate Guide to YouTube for Business helps small business owners create marketing videos to help promote their products, share their story, build a community around their brand without spending a fortune-all the while making money.

BENEFITS, COSTS AND LIMITS OF ECONOMIC INCREASE

Directory of Open Access Journals (Sweden)

VĂDUVA CECILIA ELENA

2014-08-01

Full Text Available The macroeconomic situation of a nation cannot be characterized just by the equilibrium conditions of its economy, but especially by the growth level and rate of the gross domestic product or the national, total income and per inhabitant. These are at the base to ensure the resources to raise the life standard of people, and for the overall progress of the country, for its honorable placement or framing in the national economy. The oscillations of the economic activities and the long term trend interweaved along centuries. Looked in a millenary retrospective by “L'Histoire” known magazine, they appear like: “while the brutal, short-term crises are well sighted, and the tri-decennial cycles have been defined by the Russian economist Kondratieff and are admitted, the long term movements are less known, those trends which make the succession of “The beautiful of the XIV century”, “The gloomy of the XVII century” and the XIX century, considered “grey”, the extraordinary of the XX century, the economics and economic historians are far from agreeing on the reality of these long movements, and if they admit them, they separate on their profound causes.”

The impact of the 2008 economic crisis on the increasing number of young psychiatric inpatients.

Science.gov (United States)

Medel-Herrero, Alvaro; Gomez-Beneyto, Manuel

2017-11-21

Little is published about the impact of the 2008 economic crisis on mental health services in Spain. An interrupted time series analysis was conducted to investigate a potential short-term association between the 2008 economic crisis and the number of psychiatric hospital admissions. The timing of the intervention (April 2008) was based on observed changes in Gross Domestic Product (GDP). Data on 1,152,880 psychiatric inpatients from the national Hospital Morbidity Survey, 69 months before and after the onset of the economic crisis (April 2008), were analyzed. Age-adjusted psychiatric (ICD9 290-319) hospital discharge rates significantly increased from April 2008, matching the onset of the crisis, especially for inpatients aged 15-24 years old and to a less extend for inpatients aged 25-34 years old. Other age groups were not affected. There was a significant increase in diagnoses for disturbance of conduct and emotions, depression, neurotic and personality disorders and alcohol and drug disorders; however, diagnoses for mental retardation and organic psychosis for 15-34 years old inpatients were unaffected. Psychiatric hospital admissions abruptly increased in April 2008, coinciding with the onset of the economic crisis. We identified age groups and diagnoses affected. Increased hospitalizations were found only at the age-ranges most affected by the rise in unemployment. The diagnoses affected were those most sensitive to environmental changes. Copyright © 2017 SEP y SEPB. Publicado por Elsevier España, S.L.U. All rights reserved.

Librarians Are the Ultimate Knowledge Managers?

Science.gov (United States)

Koina, Cathie

2003-01-01

Librarians are the ultimate knowledge managers. Everyone knows that. After all, haven't they been the custodians of documented knowledge for centuries? Who could possibly do it better than them? Well, then why aren't people knocking down their doors, begging them to be the knowledge managers of the organisation? Are they just ignorant of how…

Inertial fusion: strategy and economic potential

International Nuclear Information System (INIS)

Nuckolls, J.H.

1983-01-01

Inertial fusion must demonstrate that the high target gains required for practical fusion energy can be achieved with driver energies not larger than a few megajoules. Before a multi-megajoule scale driver is constructed, inertial fusion must provide convincing experimental evidence that the required high target gains are feasible. This will be the principal objective of the NOVA laser experiments. Implosions will be conducted with scaled targets which are nearly hydrodynamically equivalent to the high gain target implosions. Experiments which demonstrate high target gains will be conducted in the early nineties when multi-megajoule drivers become available. Efficient drivers will also be demonstrated by this time period. Magnetic fusion may demonstrate high Q at about the same time as inertial fusion demonstrates high gain. Beyond demonstration of high performance fusion, economic considerations will predominate. Fusion energy will achieve full commercial success when it becomes cheaper than fission and coal. Analysis of the ultimate economic potential of inertial fusion suggests its costs may be reduced to half those of fission and coal. Relative cost escalation would increase this advantage. Fusions potential economic advantage derives from two fundamental properties: negligible fuel costs and high quality energy (which makes possible more efficient generation of electricity)

Trump er gældsøkonomiens ultimative illusionist

DEFF Research Database (Denmark)

Nielsen, Peter

2018-01-01

Trump giver ikke kun gevaldige skattelettelser og nærer en illusion om, at vækst vil løse alle problemer. Han fortrænger også gældsøkonomiens ultimative bundlinje i form af klimaforandringerne.......Trump giver ikke kun gevaldige skattelettelser og nærer en illusion om, at vækst vil løse alle problemer. Han fortrænger også gældsøkonomiens ultimative bundlinje i form af klimaforandringerne....

Think Again: Higher Elasticity of Substitution Increases Economic Resilience

OpenAIRE

P. Dumas; S. Hallegatte

2009-01-01

This paper shows that, counter-intuitively, a higher elasticity of substitution in model production function can lead to reduced economic resilience and larger vulnerability to shocks in production factor prices. This result is due to the fact that assuming a higher elasticity of substitution requires a recalibration of the production function parameters to keep the model initial state unchanged. This result has consequences for economic analysis, e.g., on the economic vulnerability to climat...

Applying lessons from behavioral economics to increase flu vaccination rates.

Science.gov (United States)

Chen, Frederick; Stevens, Ryan

2017-12-01

Seasonal influenza imposes an enormous burden on society every year, yet many people refuse to obtain flu shots due to misconceptions of the flu vaccine. We argue that recent research in psychology and behavioral economics may provide the answers to why people hold mistaken beliefs about flu shots, how we can correct these misconceptions, and what policy-makers can do to increase flu vaccination rates. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

The ultimate disposition of depleted uranium

Energy Technology Data Exchange (ETDEWEB)

Lemons, T.R. [Uranium Enrichment Organization, Oak Ridge, TN (United States)

1991-12-31

Depleted uranium (DU) is produced as a by-product of the uranium enrichment process. Over 340,000 MTU of DU in the form of UF{sub 6} have been accumulated at the US government gaseous diffusion plants and the stockpile continues to grow. An overview of issues and objectives associated with the inventory management and the ultimate disposition of this material is presented.

26 CFR 5c.168(f)(8)-9 - Pass-through leases-transfer of only the investment tax credit to a party other than the ultimate...

Science.gov (United States)

2010-04-01

... investment tax credit to a party other than the ultimate user of the property. [Reserved] 5c.168(f)(8)-9...) INCOME TAX (CONTINUED) TEMPORARY INCOME TAX REGULATIONS UNDER THE ECONOMIC RECOVERY TAX ACT OF 1981 § 5c.168(f)(8)-9 Pass-through leases—transfer of only the investment tax credit to a party other than the...

Conflict Between Economic Growth and Environmental Protection

Energy Technology Data Exchange (ETDEWEB)

Czech, Bryan

2012-01-09

The conflict between economic growth and environmental protection may not be reconciled via technological progress. The fundamentality of the conflict ultimately boils down to laws of thermodynamics. Physicists and other scholars from the physical sciences are urgently needed for helping the public and policy makers grasp the conflict between growth and environmental protection.

TAX COMPONENT OF FISCAL POLICY OF INCREASE COMPETITIVENESS OF NATIONAL ECONOMICS

Directory of Open Access Journals (Sweden)

A. Danilov

2013-08-01

Full Text Available The article is devoted to the problems of using fiscal levers to regulate the national economy competitiveness. What kind of tax levers should be used in order to increase the competitiveness of the national economy is justified. Taxes are the main source of fiscal revenue of the country, which depends on the inherent principles of optimizing the tax system, determined Ukraine's withdrawal from the crisis and raising the country's competitiveness. It is proposed differentiation in income tax rates, depending on whether the company is engaged in innovation and investment activity or not. Changing the rate of value added tax in a downward will reduce the revenue of the country. For enterprises that are not exporting products to decrease the amount of working capital for a certain period Fiscal policy that promotes the removal of the country's financial and economic crisis and the increasing competitiveness of the state, should be challenging. In order to implement incentive effects of taxes set forth in the tax code, we propose a linear programming model of the budget (revenue and expenditure . Building the economic and mathematical optimization model with possible actions challenging the tax factors of individual taxes and the possibilities of using the proceeds of certain taxes on certain items of expenditure budget.

Ultimate load model test for Sizewell 'B' primary containment

International Nuclear Information System (INIS)

Crowder, R.

1988-01-01

This paper considers the factors influencing the adoption of an ultimate load factor for the Sizewell 'B' PWR primary containment structure. As part of the validation process for the ultimate load analysis method, a proposal has been made by Nuclear Design Associates to build and test a 1/10th scale model of the containment structure, which would proceed following the granting of section 2 consent for Sizewell 'B'. The modelling principles, construction method and test proposals are examined in some detail. The proposal is currently being considered by the CEGB's Project Management Team. (author)

Ultimate limits to proton decay searches

International Nuclear Information System (INIS)

Learned, J.G.

1981-01-01

Proton decay searches become increasingly difficult above lifetimes of 10 33 years. It is concluded that in the foreseeable future no experiment will surpass approx. 10 34 years. If proton decay is not observed by the current round of experiments, then the approach suggested herein, of a deep ocean experiment, will permit achieving a lifetime limit near 10 34 years. Utilizing a relatively dense DUMAND-like deep ocean detector of (100 m) 3 size appears to be the only economically feasible approach for detectors containing greater than or equal to 10 35 nucleons

Ultimate capabilities of soft x-ray optics

International Nuclear Information System (INIS)

Vinogradov, A.V.; Zorev, N.N.; Kozhevnikov, I.V.

1988-01-01

Nonimaging soft X-ray optics is examined. The ultimate capabilities of a number of X-ray optical components designed for concentration and collimation of radiation from point sources are determined. The applications of X-ray optics are discussed together with the properties of materials in the X-ray range

Happiness Function in an Islamic Economy: Triple Economic Growth, Fair Distribution and Human Happiness

Directory of Open Access Journals (Sweden)

محمد أحمد حسن الأفندي

2017-12-01

Full Text Available This study investigated the characteristics of happiness function in an Islamic economy framework. It analyzed the nature and trend of the link between economic growth, equal distribution and level of human happiness. These interrelated concepts form the essence of this study problem. The study assumed four main possible tracks for the happiness function in an Islamic economy, which ultimately emphasized the wider concept of happiness that includes faith and moral values. It indicates that people’s happiness increases with the increase of material and non material resources. However, happiness increases even if material resources decline. That is a case which reflects impact of faith and moral values on people’s happiness. The study indicated the importance of conducting empirical and field studies to examine the effect of material and non- material potentials on happiness. Keywords: Happiness function, Material resources for Happiness, Nonmaterial resources for happiness, Economic growth, Equal distribution.

Ultimate Opening Combined with Area Stability Applied to Urban Scenes

OpenAIRE

Marcotegui , Beatriz; Serna , Andrés; Hernández , Jorge

2017-01-01

International audience; This paper explores the use of ultimate opening in urban analysis context. It demonstrates the efficiency of this approach for street level elevation images, derived from 3D point clouds acquired by terrestrial mobile mapping systems. An area-stability term is introduced in the residual definition, reducing the over-segmentation of the vegetation while preserving small significant regions. We compare two possible combinations of the Ultimate Opening and the Area Stabil...

Three essays in energy and environmental economics

Science.gov (United States)

Redlinger, Michael

This thesis exploits the boom in U.S. oil and gas production to explore several empirical questions in environmental and energy economics. In the first essay, statistical techniques are employed to evaluate learning-by-doing in the Bakken Shale Play. Furthermore, the essay demonstrates organizational forgetting and knowledge spillovers among firms. The results show rates of learning in an important sector the U.S. economy and may have broader lessons for productivity gains and losses. The second essay investigates interfirm learning economies in oil well drilling in terms of productivity improvements and increases in environmental safety. The empirical results improve our understanding of how interfirm relationships influence productivity as well as the drivers of environmental incidents. Lastly, the third essay analyzes the impacts of stricter environmental regulations on oil production and well drilling in North Dakota. The results have particular relevance for policymakers seeking to understand the trade-offs between resource development and environmental quality. These three essays ultimately expand our knowledge of how learning economies occur and the effects of environmental regulations on economic activity.

The Ultimate Technology

DEFF Research Database (Denmark)

Riis, Søren

2013-01-01

One of the most influential philosophers of the 20th century, Martin Heidegger (1889-1976), died prior to the remarkable cloning of the sheep Dolly and before Dr. Venter started his experiments on creating synthetic life, and he never explicitly discussed living technologies. However, by reinterp......One of the most influential philosophers of the 20th century, Martin Heidegger (1889-1976), died prior to the remarkable cloning of the sheep Dolly and before Dr. Venter started his experiments on creating synthetic life, and he never explicitly discussed living technologies. However......, by reinterpreting his notion of "modern technology," this article shows how it is possible to philosophically assess living technologies and to recognize ways in which Heidegger anticipated this phenomenon with his notion of cybernetics. The interpretation elucidates the fundamental process of technology becoming...... living and simultaneously presents living technology as the ultimate technology. The thesis of this article is that living technology is not just one more technology; rather, it is the perfection of technology as understood by Aristotle. Aristotle's thinking is in this way a key example of a profound...

A study on nonlinear behavior of reactor containment structures during ultimate accident condition(I)

Energy Technology Data Exchange (ETDEWEB)

Kim, Sun Hoon; Kim, Young Jin; Park, Joo Yeon [Youngdong Univ., Yeongdong (Korea, Republic of)] (and others)

2003-03-15

In this study, the following scope and contents are established for first year's study of determining ultimate pressure capacity of CANDU-type reactor containment. State-of-arts on the prediction of the ultimate pressure capacity of prestressed concrete reactor containment. Comparative study on structural characteristics and analysis model of CANDU-type reactor containment. State-of-arts on evaluation method of the ultimate pressure capacity of prestressed concrete reactor containment. Enhancement of evaluation method of the ultimate pressure capacity for PWR containment structure. In order to determine a realistic lower bound of a typical reactor containment structural capacity for internal pressure, modelling techniques and analytical investigation to predict its non-linear behavior up to ultimate capacity are required. Especially, the in-depth evaluation of modeling technique and analysis procedure for determining ultimate pressure capacity of CANDU-type reactor containment is required. Therefore, modelling techniques and analytical investigation to predict its non-linear behavior up to ultimate pressure capacity of CANDU-type reactor containment for internal pressure will be suggested in this study.

A study on nonlinear behavior of reactor containment structures during ultimate accident condition(I)

International Nuclear Information System (INIS)

Kim, Sun Hoon; Kim, Young Jin; Park, Joo Yeon

2003-03-01

In this study, the following scope and contents are established for first year's study of determining ultimate pressure capacity of CANDU-type reactor containment. State-of-arts on the prediction of the ultimate pressure capacity of prestressed concrete reactor containment. Comparative study on structural characteristics and analysis model of CANDU-type reactor containment. State-of-arts on evaluation method of the ultimate pressure capacity of prestressed concrete reactor containment. Enhancement of evaluation method of the ultimate pressure capacity for PWR containment structure. In order to determine a realistic lower bound of a typical reactor containment structural capacity for internal pressure, modelling techniques and analytical investigation to predict its non-linear behavior up to ultimate capacity are required. Especially, the in-depth evaluation of modeling technique and analysis procedure for determining ultimate pressure capacity of CANDU-type reactor containment is required. Therefore, modelling techniques and analytical investigation to predict its non-linear behavior up to ultimate pressure capacity of CANDU-type reactor containment for internal pressure will be suggested in this study

75 FR 60133 - Agency Information Collection Activities: Declaration of Ultimate Consignee That Articles Were...

Science.gov (United States)

2010-09-29

... Activities: Declaration of Ultimate Consignee That Articles Were Exported for Temporary Scientific or... the Declaration of Ultimate Consignee That Articles Were Exported for Temporary Scientific or...: Title: Declaration of Ultimate Consignee That Articles Were Exported for Temporary Scientific or...

Effects of urbanization on animal behaviour : patterns, underlying mechanisms and ultimate causes

OpenAIRE

Miranda, Ana Catarina Sequeira Nunes Coutinho de

2014-01-01

Human-altered environmental conditions affect many species at the global scale. An extreme form of anthropogenic alteration is the existence and rapid increase of urban areas. A key question is how animals cope with urbanization. In order to live in cities, animals have to adjust their behaviour and life histories to the urban novel environment.The main objectives of this thesis were to investigate (i) the existence of behavioural changes related to the urbanization process, (ii) the ultimate...

Ultimate gradient in solid-state accelerators

International Nuclear Information System (INIS)

Whittum, D.H.

1998-08-01

The authors recall the motivation for research in high-gradient acceleration and the problems posed by a compact collider. They summarize the phenomena known to appear in operation of a solid-state structure with large fields, and research relevant to the question of the ultimate gradient. They take note of new concepts, and examine one in detail, a miniature particle accelerator based on an active millimeter-wave circuit and parallel particle beams

Increasing Impact of Economic Conditions upon Higher Education Enrollments.

Science.gov (United States)

Rusk, James J.; And Others

1982-01-01

To assess the impact of economic conditions on enrollment in higher education, researchers used time series analysis on national data for 1966-78 and on 1972-78 data from all eight regions of the country and the University of Arizona. The findings indicate enrollment has gone up during economic downturns. (Author/RW)

78 FR 69101 - Agency Information Collection Activities: Declaration of the Ultimate Consignee That Articles...

Science.gov (United States)

2013-11-18

... Activities: Declaration of the Ultimate Consignee That Articles Were Exported for Temporary Scientific or... the Declaration of the Ultimate Consignee that Articles were Exported for Temporary Scientific or...: Title: Declaration of the Ultimate Consignee that Articles were Exported for Temporary Scientific or...

INCREASING ECONOMIC WELFARE OF CHURCH CONGREGATION : A CONCEPT OF EMPOWERMENT

Directory of Open Access Journals (Sweden)

TONGAM SIHOL NABABAN

2017-03-01

Full Text Available In our community, many structural problems unresolved well, especially in social and economic life. Seeing this reality, the Church needs to have a sensitivity and a strong commitment to encourage cooperation of some parties to empower people, especially its congregation. Congregation of the Church, especially the poor need to be raised and empowered to pursue their own welfare through economic business. One manifestation of the Church's task is to empower the community-based and to revitalize its role more focused on optimizing the institution of community economy. For that, it is important to use the Model of Empowerment of Congregation-Based Community Economic in form of business partnership. The success of congregation economic empowerment lies in the motivation and orientation of the actors themselves, where the Church is expected to seriously fight. Keywords: Church, Congregation, Community-Based Economic, Business Partnership,  Empowerment.

''Project Crystal'' for ultimate storage of highly radioactive waste

International Nuclear Information System (INIS)

Anon.

1983-01-01

NAGRA (The National Association for storage of radioactive waste) in Baden has launched in North Switzerland an extensive geological research program. The current research program, under the title of ''Project Crystal'', aims at providing the scientific knowledge which is required for the assessment of the suitability of the crystalline sub-soil of North Switzerland for the ultimate storage of highly radioactive waste. Safety and feasibility of such ultimate storage are in the forefront of preoccupations. Scientific institutes of France, Germany, USA and Canada are cooperating more particularly on boring research and laboratory analyses. Technical data are given on the USA and German installations used. (P.F.K.)

Test research and analysis for ultimate capacity of Qinshan NPP PCCV

International Nuclear Information System (INIS)

Zufeng, X.

1994-01-01

This paper introduces design and research for containment of Qinshan NPP which is the first PWR in CHINA designed and constructed by ourselves. The PCCV design is basically in conformity to ASME code. To verify the structural integrity capacity of Qinshan NPP containment, we fulfilled SIT and ILRT successfully in June, 1991. The special attention of the paper is focused on the ultimate capacity of the PCCV under severe accidents and earthquake. A study comprised of five different independent parts has been performed for the development of containment model test and corresponding nonlinear analysis. There are two prestressed concrete containment models with equipment hatch. One is 1/15 scale with steel liner tested on shake table and then moved out loaded with atmospheric pressure. The other is 1/10 scale without steel liner loaded with water pressure until destruction. From different methods including model test and nonlinear analysis, all obtained unanimous conclusion. The capacity under internal pressure and earthquake is reliable. The safety margin is enough. Consequently, in the second phase of Qinshan NPP and other PWR NPP under design, PCCV should be a better selection in China since it's more economic, rational and safe. (author)

Seismic shear wall ISP NUPEC's seismic ultimate dynamic response test. Comparison report

International Nuclear Information System (INIS)

1996-01-01

In the seismic design of a nuclear power plant, evaluation of the ultimate strength of the nuclear reactor building is an important subject for assessment of seismic reliability of the plant. In order to carry out the evaluation, the response characteristics of reinforced concrete seismic shear walls up to their ultimate state have to be understood. For this purpose, there is a need to develop reliable non-linear response analysis methods which enables the reliable ultimate strength evaluation of nuclear reactor buildings. Along with this need, many computer codes have been developed. These computer codes are compared. (K.A.)

Problems of Development and Increase of Economic Efficiency of Sugar Beet Production

Directory of Open Access Journals (Sweden)

Tomashevska Olga A.

2017-06-01

Full Text Available The aim of the article is the studying of the trends of development and economic efficiency of sugar beet production (using the example of agricultural enterprises of Rokytne district of Kyiv region and an attempt to outline the directions for improvement of the situation in the sugar beet industry. As a result of the research, the dynamics of development and economic efficiency of sugar beet production at farms of Rokytne district of Kyiv region is analyzed, and the break-even volume of sugar beet production by agrarian enterprises of Kiev region and an individual enterprise of Rokytne district is determined. Particular attention is paid to the dynamics of profitability of sugar beet production in the period from 2011 to 2015. The main problems hindering the development of sugar beet production are identified, namely, the lack of sales channels and high production costs. Prospects for further research in this area are to increase the economic efficiency of sugar beet production and find ways to develop this sector, provided that the production is properly organized, the manufacturing process is followed, the fertilizers are properly used, the seeds are chosen correctly, advanced technologies and high-performance equipment are applied, etc.

Relationship between Economic Freedom and Pro-poor Growth: Evidence from Pakistan (1995-2010

Directory of Open Access Journals (Sweden)

Khalid ZAMAN

2011-07-01

Full Text Available The relationship between economic freedom and pro-poor growth is examined in Pakistan from 1995-2010. The concept of pro-poor growth is derived from the literature of Kakwani and Pernia (2000 and Kakwani and Son (2003. The domino effect shows that there is a strong link between economic freedom indicators and pro-poor growth. Econometric analysis proves a strong relationship between economic freedom, poverty reduction and income inequality. Results reveal that larger the business freedom and / or trade freedom, greater the economic growth. This will ultimately reduce poverty in the country.

Ductility and Ultimate Capacity of Prestressed Steel Reinforced Concrete Beams

Directory of Open Access Journals (Sweden)

Chengquan Wang

2017-01-01

Full Text Available Nonlinear numerical analysis of the structural behaviour of prestressed steel reinforced concrete (PSRC beams was carried out by using finite element analysis software ABAQUS. By comparing the load-deformation curves, the rationality and reliability of the finite element model have been confirmed; moreover, the changes of the beam stiffness and stress in the forcing process and the ultimate bearing capacity of the beam were analyzed. Based on the model, the effect of prestressed force, and H-steel to the stiffness, the ultimate bearing capacity and ductility of beam were also analyzed.

Ultimate strength and ductility of steel reinforced concrete beam-columns

International Nuclear Information System (INIS)

Shohara, Ryoichi

1991-01-01

The ultimate strength and ductility of SRC beam-columns are investigated using the data gathered in Architectural Institute of Japan. Though the simple superposed strength formula in AIJ standard underestimates the strength of SRC beam-column failed in flexure, the generalized superposed strength formula estimates it satisfactory. The strength formula in AIJ standard does not good agreement with test data. The SRC beam-column failed in shear has almost equalductility with that failed in flexure owing to the encased steel. Author presents the formulas which estimate the ultimate deformation angle for SRC beam-columns. (author)

Hydrogeological problems in the ultimate storage of radioactive wastes

International Nuclear Information System (INIS)

Uerpmann, E.P.

1980-01-01

The following work shows how one can achieve the safe closure of ultimate-stored radioactive wastes by connecting a series of various barriers to the biosphere. The propagation of radionuclides by ground water is considered to be the most important long-term transport mechanism. Salt occurences in the Federal Republic of Germany are considered to be the best form suitable for end storage formations for known reasons. When not observing mining and hydrogeological knowledge, the danger of uncontrollable water flow in the end storage can arise from the water solubility of the salt rocks. Therefore the filling of salt mines and the subsequent procedures are dealt with in detail. The leading of radioactive nuclides is influenced by the properties of the ultimately stored wastes and by the quality of the remaining filling of the caves. These problems are dealt with in detail. A series of barriers to the closure of the underground caves are suggested and discussed. The most important barriers consist of the stability of the corresponding selected end storage structure. Possible arrangements of the storage cave are given which even after storage must maintain a high stability. Proposals are made on how the ultimately stored wastes can protect themselves against contact with free water or salt solutions. (orig.) [de

Anticipating ocean acidification's economic consequences for commercial fisheries

International Nuclear Information System (INIS)

Cooley, Sarah R; Doney, Scott C

2009-01-01

Ocean acidification, a consequence of rising anthropogenic CO 2 emissions, is poised to change marine ecosystems profoundly by increasing dissolved CO 2 and decreasing ocean pH, carbonate ion concentration, and calcium carbonate mineral saturation state worldwide. These conditions hinder growth of calcium carbonate shells and skeletons by many marine plants and animals. The first direct impact on humans may be through declining harvests and fishery revenues from shellfish, their predators, and coral reef habitats. In a case study of US commercial fishery revenues, we begin to constrain the economic effects of ocean acidification over the next 50 years using atmospheric CO 2 trajectories and laboratory studies of its effects, focusing especially on mollusks. In 2007, the $3.8 billion US annual domestic ex-vessel commercial harvest ultimately contributed $34 billion to the US gross national product. Mollusks contributed 19%, or $748 million, of the ex-vessel revenues that year. Substantial revenue declines, job losses, and indirect economic costs may occur if ocean acidification broadly damages marine habitats, alters marine resource availability, and disrupts other ecosystem services. We review the implications for marine resource management and propose possible adaptation strategies designed to support fisheries and marine-resource-dependent communities, many of which already possess little economic resilience.

Europe's economic integration: Maastricht and Europe. Europas wirtschaftliche Integration: Maastricht und Europa

Energy Technology Data Exchange (ETDEWEB)

Jaeggi, U. (DuPont de Nemours International S.A., Genf (Switzerland))

1994-10-01

The Maastricht Treaty is a decisive step towards Europe's economic integration, which will ultimately provide an alignment of economic policies and a common currency. Companies wishing to keep abreast of their competitors and contribute to improving the competitivity of Europe's industry are faced with the challenge of changing their traditional ways of business relations. (orig.)

Mindfulness training increases cooperative decision making in economic exchanges: Evidence from fMRI.

Science.gov (United States)

Kirk, Ulrich; Gu, Xiaosi; Sharp, Carla; Hula, Andreas; Fonagy, Peter; Montague, P Read

2016-09-01

Emotions have been shown to exert influences on decision making during economic exchanges. Here we investigate the underlying neural mechanisms of a training regimen which is hypothesized to promote emotional awareness, specifically mindfulness training (MT). We test the hypothesis that MT increases cooperative economic decision making using fMRI in a randomized longitudinal design involving 8weeks of either MT or active control training (CT). We find that MT results in an increased willingness to cooperate indexed by higher acceptance rates to unfair monetary offers in the Ultimatum Game. While controlling for acceptance rates of monetary offers between intervention groups, subjects in the MT and CT groups show differential brain activation patterns. Specifically, a subset of more cooperative MT subjects displays increased activation in the septal region, an area linked to social attachment, which may drive the increased willingness to express cooperative behavior in the MT cohort. Furthermore, MT resulted in attenuated activity in anterior insula compared with the CT group in response to unfair monetary offers post-training, which may suggest that MT enables greater ability to effectively regulate the anterior insula and thereby promotes social cooperation. Finally, functional connectivity analyses show a coupling between the septal region and posterior insula in the MT group, suggesting an integration of interoceptive inputs. Together, these results highlight that MT may be employed in contexts where emotional regulation is required to promote social cooperation. Copyright © 2016 Elsevier Inc. All rights reserved.

Exploring Ultimate Water Capillary Evaporation in Nanoscale Conduits.

Science.gov (United States)

Li, Yinxiao; Alibakhshi, Mohammad Amin; Zhao, Yihong; Duan, Chuanhua

2017-08-09

Capillary evaporation in nanoscale conduits is an efficient heat/mass transfer strategy that has been widely utilized by both nature and mankind. Despite its broad impact, the ultimate transport limits of capillary evaporation in nanoscale conduits, governed by the evaporation/condensation kinetics at the liquid-vapor interface, have remained poorly understood. Here we report experimental study of the kinetic limits of water capillary evaporation in two dimensional nanochannels using a novel hybrid channel design. Our results show that the kinetic-limited evaporation fluxes break down the limits predicated by the classical Hertz-Knudsen equation by an order of magnitude, reaching values up to 37.5 mm/s with corresponding heat fluxes up to 8500 W/cm 2 . The measured evaporation flux increases with decreasing channel height and relative humidity but decreases as the channel temperature decreases. Our findings have implications for further understanding evaporation at the nanoscale and developing capillary evaporation-based technologies for both energy- and bio-related applications.

Experimental study on ultimate strength and strain behavior of concrete under biaxial compressive stresses

International Nuclear Information System (INIS)

Onuma, Hiroshi; Aoyagi, Yukio

1976-01-01

The purpose of this investigation was to study the ultimate strength failure mode and deformation behavior of concrete under short-term biaxial compressive stresses, as an aid to design and analyze the concrete structures subjected to multiaxial compression such as prestressed or reinforced concrete vessel structures. The experimental work on biaxial compression was carried out on the specimens of three mix proportions and different ages with 10cm x 10cm x 10cm cubic shape in a room controlled at 20 0 C. The results are summarized as follows. (1) To minimize the surface friction between specimens and loading platens, the pads of teflon sheets coated with silicone grease were used. The coefficient of friction was measured and was 3 percent on the average. (2) The test data showed that the strength of the concrete subjected to biaxial compression increased as compared to uniaxial compressive strength, and that the biaxial strength increase was mainly dependent on the ratio of principal stresses, and it was hardly affected by mix proportions and ages. (3) The maximum increase of strength, which occurred at the stress ratio of approximately sigma 2 /sigma 1 = 0.6, was about 27 percent higher than the uniaxial strength of concrete. (4) The ultimate strength in case of biaxial compression could be approximated by the parabolic equation. (Kako, I.)

ORGANIZATIONAL AND ECONOMIC ASPECTS OF INCREASING COMPETITIVENESS OF UKRAINIAN BANKS

Directory of Open Access Journals (Sweden)

Ivanova S.

2018-01-01

Full Text Available Introduction. Modern business conditions and comprehensive economic globalization put the banking institutions at the forefront of the task of achieving and maintaining a high level of competitiveness both on the domestic and on the external financial markets, as banks serve as the main intermediaries in the whole complex of relationships between different economic subjects. To achieve and maintain the competitiveness of banks it is important to create an effective management mechanism, which determines the relevance of the chosen topic. Purpose. The purpose of the work is to summarize the existing theoretical aspects concerning the competitiveness of banks and develop organizational and economic approaches to its enhancement and implementation in banking practice. Results. The article generalizes the notion of competitiveness as an economic category and defines the main approaches of scientists to its interpretation. The role and importance of foreign capital in the banking system and its impact on the competitiveness of banks are considered, and the share of foreign capital in the authorized capital of banks for the period of 2008-2017 is calculated. On the basis of the comparative analysis, the impact on the competitiveness of the largest banking institutions of Ukraine on the performance indicators, such as volumes of assets, liabilities of banks and capital adequacy, was investigated. The possibility of increasing the efficiency of the mechanism of ensuring competitiveness according to the process approach is outlined. By means of the Microsoft Office Visio software system, the Bank’s own Banking Business Management business process was built to ensure the bank’s viability and its structural analysis according to the IDEF0 standard of the SADT methodology. Conclusions. The relationship between the analysis of the bank’s position and the development of its development strategy is important for the understanding and effective management

Social and economic factors of the natural risk increasing: estimation of the Russian regions

Directory of Open Access Journals (Sweden)

E. Petrova

2004-01-01

Full Text Available This study is an attempt to assess quantitatively social and economic factors that determine vulnerability of Russian regions to natural risk, to trace the space differences of the considered factors, and to group the regions by their similarity. In order to indicate the regional differences in social and economic development, equipment condition, dangerous substances accumulation, and social trouble four the most suitable parameters were estimated, including the per capita production of Gross Regional Product (GRP, capital consumption, volume of total toxic waste, and crime rate. Increase of the first parameter causes vulnerability reducing, the increase of the last three causes its increasing. Using multidimensional cluster analysis five types of regions were found for Russia according to similarity of the considered parameters. These types are characterized with higher value of a single (rarely two chosen parameter, which seems to be sufficient enough to affect natural risks increasing in these regions in near future. Only few regions belonging to the fifth type proved to have rather high value of GRP and relatively low values of the other parameters. The negative correlation was found between a number of natural disasters (ND and the per capita GRP in case when some parameters reached anomalously high value. The distinctions between regions by prevailing different parameters, which result in natural risk increasing, help risk management to find directions where to focus on.

The ultimate challenge of cloacal exstrophy.

Science.gov (United States)

Schober, Justine M; Carmichael, Polly A; Hines, Melissa; Ransley, Philip G

2002-01-01

Our review addresses the various system abnormalities associated with cloacal exstrophy and revisits the question of gender assignment. Gender assignment decisions and psychological aspects of gender issues have become the "ultimate challenge." Exploration of gender identity, gender role behavior and sexual orientation has just begun. A comprehensive literature review was performed with all world literature regarding the current management of cloacal exstrophy. Research focused on management principles, outcomes and documentation of concurrent anomalies. We also describe original research evaluating gender identity in our own series of patients raised as girls to illustrate the challenge of treatment and augment the available literature, which is scant. Abnormalities of the vertebral column ranged from hemivertebra to myelomeningocele. With magnetic resonance imaging, the incidence of spinal dysraphism approached 100% and cord tethering was also more frequently recognized. For children with the short bowel syndrome, advances in antibiotic usage, and parenteral and enteral nutrition have increased the survival rate and reduced morbidity. A neurological component has been recognized for bladder function, bladder neck continence, lower extremity function and erectile capacity. Mitrofanoff-type reconstruction with bladder neck closure and continent catheterizable stoma dramatically increased continence. Diminutive or absent penis has been documented in 30% of males, and no documentation of paternity exists. The majority of females have bicornuate uterus. However, ovaries and tubes were generally normal. No reports of proven fertility exist. The strategy and timing of surgery relating to gender assignment remain controversial. A desperate need exists for research focusing on gender development and quality of life. Until that time, a cautious watchful approach may be most appropriate as our patients with cloacal exstrophy mature into adulthood.

Ultimate capacity and influenced factors analysis of nuclear RC containment subjected to internal pressure

International Nuclear Information System (INIS)

Song Chenning; Hou Gangling; Zhou Guoliang

2014-01-01

Ultimate compressive bearing capacity, influenced factors and its rules of nuclear RC containment are key problems of safety assessment, accident treatment and structure design, etc. Ultimate compressive bearing capacity of nuclear RC containment is shown by concrete damaged plasticity model and steel double liner model of ABAQUS. The study shows that the concrete of nuclear RC containment cylinder wall becomes plastic when the internal pressure is up to 0.87 MPa, the maximum tensile strain of steel liner exceeds 3000 × 10 6 and nuclear RC containment reaches ultimate status when the internal pressure is up to 1.02 MPa. The result shows that nuclear RC containment is in elastic condition under the design internal pressure and the bearing capacity meets requirement. Prestress and steel liner play key parts in the ultimate internal pressure and failure mode of nuclear RC containment. The study results have value for the analysis of ultimate compressive bearing capacity, structure design and safety assessment. (authors)

The economic benefits of malaria elimination: do they include increases in tourism?

Science.gov (United States)

Modrek, Sepideh; Liu, Jenny; Gosling, Roland; Feachem, Richard G A

2012-07-28

Policy makers have speculated that one of the economic benefits of malaria elimination includes increases in foreign direct investment, particularly tourism. This study examines the empirical relationship between the demand for travel and malaria cases in two countries with large tourism industries around the time in which they carried out malaria-elimination campaigns. In Mauritius, this analysis examines historical, yearly tourist arrivals and malaria cases from 1978-1999, accounting for the background secular trend of increasing international travel. In Dominican Republic, a country embarking upon malaria elimination, it employs a time-series analysis of the monthly, international tourist arrivals from 1998-2010 to determine whether the timing of significant deviations in tourist arrivals coincides with malaria outbreaks. While naïve relationships exist in both cases, the results show that the relationships between tourist arrivals and malaria cases are relatively weak and statistically insignificant once secular confounders are accounted for. This suggests that any economic benefits from tourism that may be derived from actively pursuing elimination in countries that have high tourism potential are likely to be small when measured at a national level. Rather, tourism benefits are likely to be experienced with greater impact in more concentrated tourist areas within countries, and future studies should seek to assess these relationships at a regional or local level.

78 FR 55117 - Ultimate Heat Sink for Nuclear Power Plants; Draft Regulatory Guide

Science.gov (United States)

2013-09-09

... NUCLEAR REGULATORY COMMISSION [NRC-2013-0203] Ultimate Heat Sink for Nuclear Power Plants; Draft... (DG), DG-1275, ``Ultimate Heat Sink for Nuclear Power Plants.'' This regulatory guide (RG) describes methods and procedures acceptable to the NRC staff that nuclear power plant facility licensees and...

Ultimate strength analysis of ring-stiffened cylinders subjected to hydrostatic pressure

International Nuclear Information System (INIS)

Park, Chi Mo

1990-01-01

In this study, ultimate strength analysis of ring-stiffened cylinders have been performed, considering the elasto-plastic large deflection. In the elasto-plastic analysis, von Mises yield criteria, the plastic flow theory and the layered approach have been adopted. In order to take into account the follower force effect of the hydrostatic pressure, the incremental load components have been updated at every loading step. As collapse modes, axisymmetric yielding, interframe shell buckling and general buckling are considered, while local buckling of ring-stiffener is not considered. Initial shape imperfection is assumed to be the elastic buckling mode to obtain the lower bound of the ultimate strength. Results of numerical analysis are compared with the experimental results to show the validity of the present approach. It has been drawn that the present numerical results are closely correlated with the experimental results. On the other hand, the effects of initial shape imperfection and condition on the ultimate strength have been investigated. (Author)

Economic measures of performance

International Nuclear Information System (INIS)

Anon.

1992-01-01

Cogeneration systems can reduce the total cost of utility service, and, in some instances where power is sold to an electric utility, can even produce a positive net revenue stream. This is, the total cogeneration revenue is greater than the cogeneration system's operating cost plus the cost of supplemental fuel and power. Whether it is sited at an existing facility or new construction, cogeneration systems do require an incremental investment over and above that which would be required if the end user were to utilize more conventional utility services. While the decision as to whether or not one should invest in cogeneration may consider such intangibles as predictability of future utility costs, reliability of electrical supply and the quality of that supply, the decision ultimately becomes one of basic economics. This chapter briefly reviews several economic measures with regard to ease of use, accuracy and financial objective

Mechanics of arterial subfailure with increasing loading rate.

Science.gov (United States)

Stemper, Brian D; Yoganandan, Narayan; Pintar, Frank A

2007-01-01

Arterial subfailure leads to delayed symptomatology and high morbidity and mortality rates, particularly for the thoracic aorta and carotid arteries. Although arterial injuries occur during high-velocity automotive collisions, previous studies of arterial subfailure focused on quasi-static loading. This investigation subjected aortic segments to increasing loading rates to quantify effects on elastic, subfailure, and ultimate vessel mechanics. Sixty-two specimens were axially distracted, and 92% demonstrated subfailure before ultimate failure. With increasing loading rate, stress at initial subfailure and ultimate failure significantly increased, and strain at initial subfailure and ultimate failure significantly decreased. Present results indicate increased susceptibility for arterial subfailure and/or dissection under higher-rate extension. According to the present results, automotive occupants are at greater risk of arterial injury under higher velocity impacts due to greater body segment motions in addition to decreased strain tolerance to subfailure and catastrophic failure.

A comparison of international criteria for the ultimate storage of radioactive wastes

International Nuclear Information System (INIS)

Mielke, H.

1985-01-01

In countries other than the Federal Republic of Germany and internationally there are no comprehensive codes referring to criteria and safety requirements except those of the IAEA and USA. In other countries there exist safety goals for the ultimate storage or for purely geological criteria. The degree of detailing regulations differs widely abroad and internationally. Safety goals abroad and internationally as well as measures for their realisation in the ultimate storage of radioactive wastes in deep geological formations are in line with the German safety goals. The IAEA refers to general aspects of geological, waste technology and ultimate storage technology criteria. In the USA, ultimate storage technology criteria have been quantified in part. The quantitative geological criteria existing in Great Britain and in the Netherlands are only relevant in as much as safety analyses must be performed for a specific site to provide evidence for the safety of this site. The comparison shows that most requirements pronounced abroad are also made for the Federal Republic of Germany. Some requirements are more specified in the Federal Republic of Germany, some are more detailed abroad. (orig./HP) [de

Two Essays on Increasing the Learning Effectiveness of Economics Education

Science.gov (United States)

McLean, William J.

2010-01-01

Scope and Method of Study: This study develops, implements, and evaluates a new economics teaching pedagogy based on the U.S. Army's systems approach to training model. Using the approach, tasks are identified that compose the task domain for the Principles of Microeconomics course. From the 130 identified tasks, 73 are used by Economics of…

Ultimate Bound of a 3D Chaotic System and Its Application in Chaos Synchronization

Directory of Open Access Journals (Sweden)

Jiezhi Wang

2014-01-01

Full Text Available Two ellipsoidal ultimate boundary regions of a special three-dimensional (3D chaotic system are proposed. To this chaotic system, the linear coefficient of the ith state variable in the ith state equation has the same sign; it also has two one-order terms and one quadratic cross-product term in each equation. A numerical solution and an analytical expression of the ultimate bounds are received. To get the analytical expression of the ultimate boundary region, a new result of one maximum optimization question is proved. The corresponding ultimate boundary regions are demonstrated through numerical simulations. Utilizing the bounds obtained, a linear controller is proposed to achieve the complete chaos synchronization. Numerical simulation exhibits the feasibility of the designed scheme.

Ultimate internal pressure capacity assessment of SC structure

International Nuclear Information System (INIS)

Park, Hyungkui; Choi, Inkil

2013-01-01

An SC structure applied to a containment building can be quite effective. However, an SC structure cannot be applied to a containment building, because its internal pressure resistance performance has not been verified. The containment building, which undergoes ultimate internal pressure, resists the internal pressure through a pre-stress tendon. It is hard to apply a tendon to an SC structure because of its structural characteristics. Therefore, the internal pressure resistance performance of the SC structure itself should be ensured to apply it to a structure with internal pressure resistance. In this study, the suitability of an SC structure as a substitution for the tendon of a pressure resistant structure was evaluated. A containment structure model was used in this study, because it was representative structures that resistance of ultimate internal pressure be required. In this study, a nonlinear analysis was performed to evaluate and compare the behaviors of tendon model and SC structure model. By comparing the internal pressure-displacement according to the structure type, the stability of SC structure model was assessed

Ultimate dynamics of the Kirschner-Panetta model: Tumor eradication and related problems

Science.gov (United States)

Starkov, Konstantin E.; Krishchenko, Alexander P.

2017-10-01

In this paper we consider the ultimate dynamics of the Kirschner-Panetta model which was created for studying the immune response to tumors under special types of immunotherapy. New ultimate upper bounds for compact invariant sets of this model are given, as well as sufficient conditions for the existence of a positively invariant polytope. We establish three types of conditions for the nonexistence of compact invariant sets in the domain of the tumor-cell population. Our main results are two types of conditions for global tumor elimination depending on the ratio between the proliferation rate of the immune cells and their mortality rate. These conditions are described in terms of simple algebraic inequalities imposed on model parameters and treatment parameters. Our theoretical studies of ultimate dynamics are complemented by numerical simulation results.

The importance of mines for ultimate storage at Deilmann-Haniel Shaft Sinking

International Nuclear Information System (INIS)

Greinacher, Jochen; Oellers, Thomas; Ahlbrecht, Thomas

2011-01-01

Deilmann-Haniel Shaft Sinking GmbH and its predecessor and associate companies have been involved in projects for underground ultimate storage in Germany, Europe and America for over 45 years. The field of activities previously comprised surveying, planning and sinking of shafts, repair and conversion work, design of underground sealing structures, planning of conveyors and support of the BfS in planning approval procedures. Following discontinuation of activities in the German coal mining industry the use of mines for ultimate storage is an important support for German specialist mining companies. The use of mines for ultimate storage ensures that the existing mining know how in Germany is maintained, because training of the younger generation on the commercial and engineering side of the companies is made possible by the imminent major projects.

DYNAMIC ECONOMIC EFFICIENCY IN THE SOUTH-WEST OLTENIA REGION

Directory of Open Access Journals (Sweden)

Laura Mariana Cismaş

2012-03-01

Full Text Available The structure of an economy is not and has never been permanent, it does not have a static character, but only a moment of stability of a system whose internal organization is, is therefore a dynamic process. In this sense, the ultimate goal of the analysis of structural changes is to highlight the phenomenon of economic efficiency in the complex process of economic growth during the cross in our country since 1990.Lisbon agenda have targeted the European Union to become the most competitive region until 2010.Ulterior this target strategy was complemented by growth and job creation, becoming the main way of creating a European competitiveness . In this context, public policy challenges identified in the national economies have become energy market liberalization, efficiency and diversification, regulation of the economic environment, innovation and technology transfer policies that contribute to a strategy of market leadership.Besides gross value added, labor productivity is also the medium of efficient use of labor.Growth achieved both national and regional level, may be related, in terms of human resource, or increase the number of employees, or a better use of existing employees work. That aecest aspect of a better use of existing staff employee makes labor productivity is a key element in the expression efficiency of economic performance. Understanding the forces governing labor productivity, and especially the accumulation of fixed capital, improving the institutional infrastructure to generate new technologies, is objectively necessary for the formulation of policies for economic growth.

Maintained ship hull girder ultimate strength reliability considering corrosion and fatigue

DEFF Research Database (Denmark)

Hu, Yong; Cui, W.; Pedersen, Preben Terndrup

2004-01-01

The prupose of this paper is to propose a methodology to assess the time-variant ultimate strength of ship hull girder under the degradations of corrosion and fatigue. The effects of fatigue cracks on the tensile and compressive residual ultimate strength of stiffened panels and unstiffened plates......, webs and flanges, respectively. The effects of inspections and repair are taken into account. A minimum net thickness rule is used to determine repair policies. A procedure is proposed to determine the maximum allowable corrosion thickness of different parts of the hull cross section. The procedure...

Structural Change, Economic Growth and the Environmental Kuznets Curve: A Theoretical Perspective

NARCIS (Netherlands)

H.L.F. de Groot (Henri)

2003-01-01

textabstractThe question of whether economic growth will ultimately resolve environmental problems has recently been discussed in a mainly empirical literature. One of the mechanisms that can explain the finding of an inverted U-shaped relationship between income and emissions relies on the changes

The economics of nuclear power

International Nuclear Information System (INIS)

Hunt, H.; Betteridge, G.

1978-01-01

It is stated that nuclear power stations throughout the world are now providing consumers with substantially the cheapest electricity, except in areas with extensive hydro-power or cheap, clean, local coal. Thermal nuclear power stations will continue to provide economic electricity until the cost of uranium rises to several times the present level; fast reactors have the potential to continue to stabilise the cost of electricity and by moderating demand for other fuels will keep down their cost also. Headings of this paper include -The historical perspective; methods of comparing nuclear and fossil generating costs; historical comparisons of UK nuclear and fossil generating costs; waste storage and decommissioning; future changes in costs; criteria for future investment in nuclear power; alternative methods of comparison; total system cost analysis; the economics of fast reactors; and the ultimate role of fast reactors. 13 references. (author)

THE ECONOMIC CONSEQUENCES OF THE INCREASE OF THE WORLD OCEAN’S TEMPERATURE

Directory of Open Access Journals (Sweden)

Diana Perticas

2016-12-01

Full Text Available Environmental pollution represents one of the problems that humanity is facing right now, problems that create a series of economic, ecologic and social consequences. This paper wishes to identify by presenting concrete data, some of the negative effects that occurred as a result of the increase of pollution on global scale, for example like the rise of global temperature. Starting with the industrial revolution but especially with the increase of the population’s needs, desires, interests that occurred during the last decades, environmental pollution intensified to an extent that we could even consider alarming. A main effect which can be easily observed by each and every person without the need to perform measurements, is the climate warming which has a series of consequences, like for example: drought, natural disasters, decrease in agricultural production, fires (especially wildfires which reduce the population of wild animals, etc. So the effects of global warming are not just ecologic but also economic and social. Another aspect analyzed in this paper is the rise of the seas’ and oceans’ temperature which inevitably results in the decrease of the population of fish and aquatic animals. The melting of glaciers is another negative effect of the climate warming which is discussed in this paper, effect which is responsible for numerous floods that result from the rise of the sea levels causing numerous damages, the most affected people being those living in the vicinity of waters. During floods, phenomenon which occurs more and more often, drainage channels are overused many times not being able to handle the huge quantities of water, thus favoring the multiplication and spreading of rodents. There are evidences showing that the number of cases of diseases transmitted by rodents increases during natural disasters, which occur more and more often during the last decades.

Ultimate load design and testing of a cylindrical prestressed concrete vessel

International Nuclear Information System (INIS)

Stefanou, G.D.

1982-01-01

The object of this research was to design, construct and test to failure a prestressed concrete pressure vessel model that could be used to investigate the behavior of a full scale structure underworking and ultimate load. The properties and the design of the model was based generally on full scale vessels already constructed to house the nuclear reactors used in atomic power stations. To design the model the ultimate load approach was adopted throughout. All load factors associated with the prestressing have been defined and kept to a minimum in order that the vessel's behavior may be predicted. The tests on the vessel were carried out first on the elastic range to observe its behavior at working load and then at the ultimate range to observe the modes of failure and compare the actual results in both cases with the predicted values. Although full agreement between observed results and predicted values was not obtained, the conclusions drawn from the study were useful for the design of full scale vessels. (author)

Reduced design load basis for ultimate blade loads estimation in multidisciplinary design optimization frameworks

DEFF Research Database (Denmark)

Pavese, Christian; Tibaldi, Carlo; Larsen, Torben J.

2016-01-01

The aim is to provide a fast and reliable approach to estimate ultimate blade loads for a multidisciplinary design optimization (MDO) framework. For blade design purposes, the standards require a large amount of computationally expensive simulations, which cannot be efficiently run each cost...... function evaluation of an MDO process. This work describes a method that allows integrating the calculation of the blade load envelopes inside an MDO loop. Ultimate blade load envelopes are calculated for a baseline design and a design obtained after an iteration of an MDO. These envelopes are computed...... for a full standard design load basis (DLB) and a deterministic reduced DLB. Ultimate loads extracted from the two DLBs with the two blade designs each are compared and analyzed. Although the reduced DLB supplies ultimate loads of different magnitude, the shape of the estimated envelopes are similar...

Micro and Macro Economic Policies of Government of Kosovo toward SMEs

Directory of Open Access Journals (Sweden)

Merita Shabani

2017-03-01

Full Text Available The emphasis of the discussion in this paper is centered on economic policies of Kosovo government towards SMEs. The paper will analyze trends of economic policies fostered by the Government of Kosovo in attempt to maximize the development of SME’s sector. Furthermore, the paper will carry out an in-depth analytical approach of SME policies taking into account their crucial role for economic growth. The critical mode of discussion will reveal advantages and disadvantages, and subsequently ultimate paybacks as a result of promoting favorable economic policies in favor of cultivating suitable business environment for SMEs. Similarly, in concluding remarks this paper appeals for more suitable and sustainable economic policies towards SMEs taking in consideration their high potential of employment generation. The paper also suggests concrete steps the Government of Kosovo needs to undertake in terms of promoting policy opportunities in order to speed up economic development of the country, growth as well as economic welfare.

Ultimate loading of wind turbines

DEFF Research Database (Denmark)

Larsen, Gunner Chr.; Ronold, K.; Ejsing Jørgensen, Hans

1999-01-01

An extreme loading study has been conducted comprising a general wind climate analysis as well as a wind turbine reliability study. In the wind climate analysis, the distribution of the (horizontal) turbulence standard deviation, conditioned on the meanwind speed, has been approximated by fitting......, a design turbulence intensity for off-shore application is proposed which, in the IEC code framework, is applicable for extreme as well as for fatigue loaddetermination. In order to establish a rational method to analyse wind turbine components with respect to failure in ultimate loading, and in addition...... a three parameter Weibull distribution to the measured on-shore and off-shore data for wind speed variations. Specific recommendations on off-shore design turbulence intensities are lacking in the presentIEC-code. Based on the present analysis of the off-shore wind climate on two shallow water sites...

Ultimate Explanations of the Universe

CERN Document Server

Heller, Michael

2009-01-01

We humans are collectively driven by a powerful - yet not fully explained - instinct to understand. We would like to see everything established, proven, laid bare. The more important an issue, the more we desire to see it clarified, stripped of all secrets, all shades of gray. What could be more important than to understand the Universe and ourselves as a part of it? To find a window onto our origin and our destiny? This book examines how far our modern cosmological theories - with their sometimes audacious models, such as inflation, cyclic histories, quantum creation, parallel universes - can take us towards answering these questions. Can such theories lead us to ultimate truths, leaving nothing unexplained? Last, but not least, Heller addresses the thorny problem of why and whether we should expect to find theories with all-encompassing explicative power.

75 FR 76746 - Agency Information Collection Activities: Declaration of Ultimate Consignee That Articles Were...

Science.gov (United States)

2010-12-09

... Activities: Declaration of Ultimate Consignee That Articles Were Exported for Temporary Scientific or... That Articles Were Exported for Temporary Scientific or Educational Purposes. This is a proposed... forms of information. Title: Declaration of Ultimate Consignee That Articles Were Exported for Temporary...

Anticipating ocean acidification's economic consequences for commercial fisheries

Energy Technology Data Exchange (ETDEWEB)

Cooley, Sarah R; Doney, Scott C [Woods Hole Oceanographic Institution, Woods Hole, MA 02543 (United States)], E-mail: scooley@whoi.edu

2009-06-15

Ocean acidification, a consequence of rising anthropogenic CO{sub 2} emissions, is poised to change marine ecosystems profoundly by increasing dissolved CO{sub 2} and decreasing ocean pH, carbonate ion concentration, and calcium carbonate mineral saturation state worldwide. These conditions hinder growth of calcium carbonate shells and skeletons by many marine plants and animals. The first direct impact on humans may be through declining harvests and fishery revenues from shellfish, their predators, and coral reef habitats. In a case study of US commercial fishery revenues, we begin to constrain the economic effects of ocean acidification over the next 50 years using atmospheric CO{sub 2} trajectories and laboratory studies of its effects, focusing especially on mollusks. In 2007, the $3.8 billion US annual domestic ex-vessel commercial harvest ultimately contributed $34 billion to the US gross national product. Mollusks contributed 19%, or $748 million, of the ex-vessel revenues that year. Substantial revenue declines, job losses, and indirect economic costs may occur if ocean acidification broadly damages marine habitats, alters marine resource availability, and disrupts other ecosystem services. We review the implications for marine resource management and propose possible adaptation strategies designed to support fisheries and marine-resource-dependent communities, many of which already possess little economic resilience.

Conception of electron beam-driven subcritical molten salt ultimate safety reactor

Energy Technology Data Exchange (ETDEWEB)

Abalin, S.S.; Alekseev, P.N.; Ignat`ev, V.V. [Kurchatov Institute, Moscow (Russian Federation)] [and others

1995-10-01

This paper is a preliminary sketch of a conception to develop the {open_quotes}ultimate safety reactor{close_quotes} using modern reactor and accelerator technologies. This approach would not require a long-range R&D program. The ultimate safety reactor could produce heat and electric energy, expand the production of fuel, or be used for the transmutation of long-lived wastes. The use of the combined double molten salt reactor system allows adequate neutron multiplication to permit using an electron accelerator for the initial neutron flux. The general parameters of such a system are discussed in this paper.

Assessing Fatigue and Ultimate Load Uncertainty in Floating Offshore Wind Turbines Due to Varying Simulation Length

Energy Technology Data Exchange (ETDEWEB)

Stewart, G.; Lackner, M.; Haid, L.; Matha, D.; Jonkman, J.; Robertson, A.

2013-07-01

With the push towards siting wind turbines farther offshore due to higher wind quality and less visibility, floating offshore wind turbines, which can be located in deep water, are becoming an economically attractive option. The International Electrotechnical Commission's (IEC) 61400-3 design standard covers fixed-bottom offshore wind turbines, but there are a number of new research questions that need to be answered to modify these standards so that they are applicable to floating wind turbines. One issue is the appropriate simulation length needed for floating turbines. This paper will discuss the results from a study assessing the impact of simulation length on the ultimate and fatigue loads of the structure, and will address uncertainties associated with changing the simulation length for the analyzed floating platform. Recommendations of required simulation length based on load uncertainty will be made and compared to current simulation length requirements.

Quantum economics

Directory of Open Access Journals (Sweden)

Vukotić Veselin

2011-01-01

Full Text Available The globalization is breaking-down the idea of national state, which was the base for the development of economic theory which is dominant today. Global economic crisis puts emphasis on limited possibilities of national governments in solving economic problems and general problems of society. Does it also mean that globalization and global economic crisis points out the need to think about new economic theory and new understanding of economics? In this paper I will argue that globalization reveals the need to change dominant economic paradigm - from traditional economic theory (mainstream with macroeconomic stability as the goal of economic policy, to the “quantum economics“, which is based on “economic quantum” and immanent to the increase of wealth (material and non-material of every individual in society and promoting set of values immanent to the wealth increase as the goal of economic policy. Practically the question is how we can use global market for our development!

Assessing future economic impacts of acidic deposition on the recreational fishery of eastern Canada

International Nuclear Information System (INIS)

1990-01-01

A study was carried out to assess the socio-economic impacts and net economic value effects related to potential reduction in acidic deposition on the sports fishery of eastern Canada. Impacts and net economic effects that would have occurred from 1950 to 1985 if emission/deposition controls were in place are measured. Impacts and net economic effects that will occur from 1986 to 2021 if controls are put in place in the future are also measured. The study incorporated the latest data describing the relationship of acidic deposition to lake pH levels and ultimate impact on fish survival, and applies a spatial analysis system to model changes in sport fish availability with respect to pH changes and fish survival responses. It was found that if emission controls were put in place beginning in 1950 the Canadian economy would have accrued $4.3 billion in net economic value from 1950 to 1985 inclusive. The 1986 value of the historical stream of losses that occurred because controls were not put in place is $24 billion assuming a 10% rate of return. If controls were put in place in the future, net economic value to Canada due to increased angler activity would be $4.2 billion for the period 1986-2021. The value in 1986 would be $925 million. 9 figs., 34 tabs

Increasing Access for Economically Disadvantaged Students: The NSF/CSEM & S-STEM Programs at Louisiana State University

Science.gov (United States)

Wilson, Zakiya S.; Iyengar, Sitharama S.; Pang, Su-Seng; Warner, Isiah M.; Luces, Candace A.

2012-10-01

Increasing college degree attainment for students from disadvantaged backgrounds is a prominent component of numerous state and federal legislation focused on higher education. In 1999, the National Science Foundation (NSF) instituted the "Computer Science, Engineering, and Mathematics Scholarships" (CSEMS) program; this initiative was designed to provide greater access and support to academically talented students from economically disadvantaged backgrounds. Originally intended to provide financial support to lower income students, this NSF program also advocated that additional professional development and advising would be strategies to increase undergraduate persistence to graduation. This innovative program for economically disadvantaged students was extended in 2004 to include students from other disciplines including the physical and life sciences as well as the technology fields, and the new name of the program was Scholarships for Science, Technology, Engineering and Mathematics (S-STEM). The implementation of these two programs in Louisiana State University (LSU) has shown significant and measurable success since 2000, making LSU a Model University in providing support to economically disadvantaged students within the STEM disciplines. The achievement of these programs is evidenced by the graduation rates of its participants. This report provides details on the educational model employed through the CSEMS/S-STEM projects at LSU and provides a path to success for increasing student retention rates in STEM disciplines. While the LSU's experience is presented as a case study, the potential relevance of this innovative mentoring program in conjunction with the financial support system is discussed in detail.

Ultimate deformation capacity of reinforced concrete slabs underblast load

NARCIS (Netherlands)

Doormaal, J.C.A.M. van; Weerheijm, J.

1996-01-01

In this paper a test method to determine the deformation capacity and the resistance-deformation curve of blast-loaded slabs is described. This method was developed at TNO-PML. The method has been used to determine the ultimate deformation capacity of some simply supported reinforced concrete slabs

Socio-Economic Affects of Floods on Female Teachers in Jampur (Pakistan)

Science.gov (United States)

Buzdar, Muhammad Ayub; Ali, Akhtar

2011-01-01

Women are major affected segment of society in any disaster in under developed countries. Floods of 2010, in Pakistan, affected more than 17 million people. Ultimately, it created several social, psychological and financial problems for affected females. The current paper aimed to study the socio-economic affects of floods on female teachers of…

Analysis of Increasing Malwares and Cyber Crimes Using Economic Approach

OpenAIRE

Asgher, Umer; Dar, Fahad Moazzam; Hamza, Ali; Paracha, Abdul Moeed

2014-01-01

The economics of an internet crime has newly developed into a field of controlling black money. This economic approach not only provides estimated technique of analyzing internet crimes but also gives details to analyzers of system dependability and divergence. This paper will highlight on the subject of online crime, which has formed its industry since. It all started from amateur hackers who cracked websites and wrote malicious software in pursuit of fun or achieving limited objectives to p...

The feasibility study: a health economics perspective

Directory of Open Access Journals (Sweden)

Brenda Gannon

2017-02-01

Full Text Available The remit of research funding bodies is to prioritise funding for research that is of relevance and of high quality. This in turn will aim to raise the quality of healthcare and benefit to patients. Researchers are faced with increasing demands and expectations from the public purse and patients. The emphasis is to improve the quality of their research, with the ultimate aim of improving population health. While guidelines on feasibility study methods concentrate heavily on trials, there appears less guidance on application of health economics within feasibility studies, yet these are a less costly way to determine first of all if a full randomised controlled trial (RCT is feasible. A feasibility study assesses if the study can be done in a small RCT type study. Since by definition, a feasibility study does not evaluate the outcome, researchers often omit the health economics aspects but do however include statistical analysis. This leaves a gap in interpretation for policy makers and potential funders. It also means that any resulting publication does not include relevant information and therefore comparison across studies in terms of difficulty in collecting cost data is not possible. The main aim of this commentary therefore, is to demonstrate a suggested health economics analysis within a feasibility study and to recommend to researchers to include these aspects from the conception of their intervention. This paper proposes a number of points, with rationale for each point, to indicate the health economics data and the potential benefits required for coherent interpretation of the feasibility of future economic evaluations in a full trial. Economic evaluation is necessary if implementation into standard care is anticipated. Therefore, collection and summary analysis of relevant data is good practice at each point of the intervention development. Current guidelines for economic evaluation, for example, The Medical Research Guidelines in the

Evaluating the influence of increasing block tariffs in residential gas sector using agent-based computational economics

International Nuclear Information System (INIS)

Gong, Chengzhu; Yu, Shiwei; Zhu, Kejun; Hailu, Atakelty

2016-01-01

Designing a desirable increasing block tariff for the residential gas retail market has been a challenging task for regulated utilities, especially in China. To deal with such problems, in this paper, we establish an agent-based, computational economics system to provide a formal evaluation of the direct and indirect influences of several issued increasing block tariffs in the residential gas market. Moreover, a comprehensive demand response behaviour model has been improved in term of price elasticity, while still coping with income levels and complex social environment. We also compute and compare the outcomes of several increasing block tariffs with the initial flat tariff by running the system on a test-case using real-world data from a middle-scale gas retail market in Wuhan. The results indicate that there is an appropriate increasing block gas tariff scheme that has greater ability to improve social equity while still ensuring operator revenue and promoting gas conservation. In order to offset the limitations of the proposed increasing block tariffs, the regulator should adopt some complementary measures, such as applying appropriate policies targeting the intended consumers, and allowing large families to obtain extra allowance of volume. - Highlights: •Analyse the influence of increasing block tariffs in residential gas sector. •An agent-based computational economics system is utilised for policy analysis. •Increasing block tariff can generate revenue while still promote gas conservation. •The increasing subsidy for low income household can improve the social equity.

Implications for U.S. trade and nonindigenous species risk resulting from increased economic integration of the Asia-Pacific Region

Science.gov (United States)

Amanda M. Countryman; Travis Warziniack; Erin Grey

2018-01-01

This work investigates how potential changes in trade patterns resulting from increased economic integration in the Asia-Pacific region may affect the risk for nonindigenous species spread to the United States. We construct an invasion risk index utilizing the results from a global economic modeling framework in tandem with data for climate similarities between trade...

Ultimate-gradient accelerators physics and prospects

CERN Document Server

Skrinsky, Aleksander Nikolayevich

1995-01-01

As introduction, the needs and ways for ultimate acceleration gradients are discussed briefly. The Plasma Wake Field Acceleration is analized in the most important details. The structure of specific plasma oscillations and "high energy driver beam SP-plasma" interaction is presented, including computer simulation of the process. Some pratical ways to introduce the necessary mm-scale bunching in driver beam and to arrange sequential energy multiplication are dicussed. The influence of accelerating beam particle - plasma binary collisions is considered, also. As applications of PWFA, the use of proton super-colliders beams (LHC and Future SC) to drive the "multi particle types" accelerator, and the arrangements for the electron-positron TeV range collider are discussed.

Numerical Study on Ultimate Behaviour of Bolted End-Plate Steel Connections

Directory of Open Access Journals (Sweden)

R.E.S. Ismail

Full Text Available Abstract Bolted end-plate steel connections have become more popular due to ease of fabrication. This paper presents a three dimension Finite Element Model (FEM, using the multi-purpose software ABAQUS, to study the effect of different geometrical parameters on the ultimate behavior of the connection. The proposed model takes into account material and geometrical non-linearities, initial imperfection, contact between adjacent surfaces and the pretension force in the bolts. The Finite Element results are calibrated with published experimental results ''briefly reviewed in this paper'' and verified that the numerical model can simulate and analyze the overall and detailed behavior of different types of bolted end-plate steel connections. Using verified FEM, parametric study is then carried out to study the ultimate behavior with variations in: bolt diameter, end-plate thickness, length of column stiffener, angle of rib stiffener. The results are examined with respect to the failure modes, the evolution of the resistance, the initial stiffness, and the rotation capacity. Finally, the ultimate behavior of the bolted end-plate steel connection is discussed in detail, and recommendations for the design purpose are made.

Thermo-Economic Assessment of Advanced,High-Temperature CANDU Reactors

International Nuclear Information System (INIS)

Spinks, Norman J.; Pontikakis, Nikos; Duffey, Romney B.

2002-01-01

Research underway on the advanced CANDU examines new, innovative, reactor concepts with the aim of significant cost reduction and resource sustainability through improved thermodynamic efficiency and plant simplification. The so-called CANDU-X concept retains the key elements of the current CANDU designs, including heavy-water moderator that provides a passive heat sink and horizontal pressure tubes. Improvement in thermodynamic efficiency is sought via substantial increases in both pressure and temperature of the reactor coolant. Following on from the new Next Generation (NG) CANDU, which is ready for markets in 2005 and beyond, the reactor coolant is chosen to be light water but at supercritical operating conditions. Two different temperature regimes are being studied, Mark 1 and Mark 2, based respectively on continued use of zirconium or on stainless-steel-based fuel cladding. Three distinct cycle options have been proposed for Mark 1: the High-Pressure Steam Generator (HPSG) cycle, the Dual cycle, and the Direct cycle. For Mark 2, the focus is on simplification via a Direct cycle. This paper presents comparative thermo-economic assessments of the CANDU-X cycle options, with the ultimate goal of ascertaining which particular cycle option is the best overall in terms of thermodynamics and economics. A similar assessment was already performed for the NG CANDU. The economic analyses entail obtaining cost estimates of major plant components, such as heat exchangers, turbines and pumps. (authors)

Cable tray ultimate strength test employing a large shaker table

Energy Technology Data Exchange (ETDEWEB)

Komatsu, K.; Myojin, K.; Imai, K. [The Kansai Electric Power Co., Osaka (Japan); Fuyama, H. [Mitsubishi Heavy Industries Ltd, Takasago (Japan); Kokubo, E. [Mitsubishi Heavy Industdries Ltd, Kobe (Japan)

2004-07-01

Ultimate behaviors of cable trays, used in nuclear plants, have not been well studied since cable trays are designed based on conservative design criteria. In this study, by employing a large shaker table, an ultimate strength test was conducted for cable trays used in nuclear power plants. This report describes the results of shaker table test. The following results were obtained. First, in an S{sub 2} earthquake, the damping ratio was so large - more than 30% due to the rubbing of cables - that a large response was not present and the strains in the support were within the elastic limits. Secondly, the support was strong enough to sustain the cable trays even when the strain in the support was 20 times larger than the elastic limit. (authors)

Out-of-plane ultimate shear strength of RC mat-slab foundations

International Nuclear Information System (INIS)

Kumagai, Hitoshi; Nukui, Yasushi; Imamura, Akira; Terayama, Takeshi; Hagiwara, Tetsuya; Kojima, Isao

2011-01-01

There have been few studies on the out-of-plane shear in RC mat-slab foundations, and the reasonable method has been demanded to estimate ultimate shear strength of RC mat-slab foundations in the nuclear facilities. In the previous study, the out-of-plane loading tests on the 20 square slab specimens had been performed to collect the fundamental data. In this study, the test results were successfully predicted by 3D non-linear Finite Element Analysis. It has been confirmed that the ultimate shear stress in the slab specimen can be estimated by the Arakawa's formula, which is commonly used to estimate the shear strength of RC beams. (author)

PSEUDO-SCIENTIFIC ECONOMIC POLICIES OF MOLDOVA ASSOCIATION TO THE EU: METHODOLOGY, PROBLEMS, SOLUTIONS

Directory of Open Access Journals (Sweden)

Gheorghe RUSU

2016-01-01

Full Text Available Economic policies and decisions on EU association starting with the begginig of 90’s were pseudo-scientific, contradictory, incoherent because those policies have not based themselves on modern and current economic theories elaborated and promoted by the EU. Actuality. The topic is actual from the perspective of the factors’ analysis which were conducting to delay the association process of Moldova to the EU. At the same time, those were increasing instability, disequilibrium in the national economy and raise of social vulnerability and constraint levels which ultimately increased the gap between the national and EU economic development levels. During the period of 2000-2015, the socio-economic policy of the Republic of Moldova is described more as small and fragmented steps on conceiving economic and financial instruments for the integration into the EU which were reflected in the Neighbourhood Partnership and Association Agreement with the EU. These processes conducted for the state incapacity to define its own objectives and social-economic priorities for the association as well as legitimated a continuous stage of transition to the market economy. The scope of the present article is to propose a real change of the development and social-economic association policies for achieving final objective on integration to EU. The proposals would consist in emphasizing and implementation of the EU economic principles reflected in the neoclassic synthesis and neo-conservative theories; the elaboration and implementation of a new Strategy on economic supervision, coordination and anticipation of the economic disequilibrium; achieve economic stability for diminishing the negative effects of the global and regional crisis on national economy and adaptation of the development policies to the national socio-economic conditions. The methods used for the elaboration and achieving the expected results of the study were analysis and synthesis of the

Analysis of ultimate-heat-sink spray ponds. Technical report

International Nuclear Information System (INIS)

Codell, R.

1981-08-01

This report develops models which can be utilized in the design of certain types of spray ponds used in ultimate heat sinks at nuclear power plants, and ways in which the models may be employed to determine the design basis required by U.S. Nuclear Regulatory Commission Regulatory Guide 1.27

Environmental economics of lignin derived transport fuels.

Science.gov (United States)

Obydenkova, Svetlana V; Kouris, Panos D; Hensen, Emiel J M; Heeres, Hero J; Boot, Michael D

2017-11-01

This paper explores the environmental and economic aspects of fast pyrolytic conversion of lignin, obtained from 2G ethanol plants, to transport fuels for both the marine and automotive markets. Various scenarios are explored, pertaining to aggregation of lignin from several sites, alternative energy carries to replace lignin, transport modalities, and allocation methodology. The results highlight two critical factors that ultimately determine the economic and/or environmental fuel viability. The first factor, the logistics scheme, exhibited the disadvantage of the centralized approach, owing to prohibitively expensive transportation costs of the low energy-dense lignin. Life cycle analysis (LCA) displayed the second critical factor related to alternative energy carrier selection. Natural gas (NG) chosen over additional biomass boosts well-to-wheel greenhouse gas emissions (WTW GHG) to a level incompatible with the reduction targets set by the U.S. renewable fuel standard (RFS). Adversely, the process' economics revealed higher profits vs. fossil energy carrier. Copyright © 2017 The Author(s). Published by Elsevier Ltd.. All rights reserved.

Ultimate Owner and Firm Performance - Evidence from Romanian Mining and Quarrying Listed Firms

Directory of Open Access Journals (Sweden)

Cosmin MIHAI

2012-08-01

Full Text Available The main objectives of this paper are to describe the necessary steps to identify the ultimate owner and to investigate the relation between the ultimate ownership and the financial performance of Romanian mining and quarrying listed firms. The study was conducted for the companies listed on Bucharest Stock Exchange, in both regulated and non-regulated segments. The final sample included 17 companies of mining and quarrying. Return on Equity was used for measuring the financial performance of the firms. The ultimate ownership was measured by the percentage of voting rights held by a shareholder. Econometric tools like multiple linear regression analysis were used for analysis. The results of the study suggest that there is a significant negative link between financial performance and divergence between voting rights and cash-flow rights.

Telecommunications, politics, economics, and national sovereignty: A new game

Energy Technology Data Exchange (ETDEWEB)

Bugliarello, G.

1996-12-31

The impact of telecommunications on politics, economics and national sovereignty is creating a new game. Political and economic power may operate over the same territory, as in the now-rare case of isolated economies, but, more often, their domains do not coincide. Increasingly, telecommunications create major challenges for countries preoccupied with issues of national sovereignty because the national state has only a limited ability to control these intrinsic and at times potentially destabilizing powers of telecommunications and the {open_quotes}telecommunities{close_quotes} they make possible. As many traditional aspects of sovereignty are becoming weakened by telecommunications, and as the intense dynamics of networks and the expansion of telecommunities revolutionize business and politics, there is a need to prevent the situation from becoming chaotic and uncontrollable, even while recognizing the possibilities of enhanced opportunities. This requires focusing on a more flexible conception of sovereignty which can enhance the state`s attractiveness for telecommunications infrastructure, while addressing issues of ethics and morality in the new telecommications environment. A new, broad socio-technological research agenda needs to be developed - with the ultimate purpose of providing society with the tools to play the new game and thrive. 10 refs., 3 tabs.

Increase Economic Valuation of Marine Ecotourism Spots In Small Islands

Science.gov (United States)

Rahakbauw, Siska D.; Teniwut, Wellem A.; Renjaan, Meiskyana R.; Hungan, Marselus

2017-10-01

Ecotourism is one of the fast-growing sectors especially in the developing country as a source of revenue. To get a sustainable development of ecotourism, it needs broad and comprehensive effort from central government and local government, perfect example in that regards in Indonesia is Bali and Lombok. For another area in Indonesia like Kei Islands which located in two administrative governments have a major problem to build a sustainable nature-based tourism because of the location of this area to the major cities in the country makes the travel cost is high. This situation makes the role of local community as the backbone of the growth and development of nature-based tourism is critical. By using structural equation modeling (SEM), we constructed a model to enhance local community perception on economic valuation of ecotourism spots in the area. Results showed that perceived quality as the mediation driven by the intensity of appearance on national television and the internet could increase community attachment to increase willingness to pay from the local community on ecotourism in Kei islands. Also, the result also indicated that WTP value for the local community on ecotourism in Kei Islands was 10.81 per trip, with average trip per month was 1 to 4 times.

Applying Psychology to Economic Policy Design: Using Incentive Preserving Rebates to Increase Acceptance of Critical Peak Electricity Pricing

OpenAIRE

Letzler, Robert

2007-01-01

This project extends the idea that policy makers should address problems by improving economic incentives. This project adds that presenting incentives in a way that reflects how people make decisions can sometimes improve consumers’ responses to the incentives and policy outcomes. This paper uses behavioral economics to propose ways to increase electricity policy effectiveness. The cost of generating power fluctuates enormously from hour to hour but most customers pay time-invariant prices f...

Increased crop failure due to climate change: assessing adaptation options using models and socio-economic data for wheat in China

Energy Technology Data Exchange (ETDEWEB)

Challinor, Andrew J [Institute for Climate and Atmospheric Science, School of Earth and Environment, University of Leeds, Leeds LS2 9JT (United Kingdom); Simelton, Elisabeth S; Fraser, Evan D G [Sustainability Research Institute, School of Earth and Environment, University of Leeds, Leeds LS2 9JT (United Kingdom); Hemming, Debbie; Collins, Mathew, E-mail: a.j.challinor@leeds.ac.uk [Met Office Hadley Centre, FitzRoy Road, Exeter EX1 3PB (United Kingdom)

2010-07-15

Tools for projecting crop productivity under a range of conditions, and assessing adaptation options, are an important part of the endeavour to prioritize investment in adaptation. We present ensemble projections of crop productivity that account for biophysical processes, inherent uncertainty and adaptation, using spring wheat in Northeast China as a case study. A parallel 'vulnerability index' approach uses quantitative socio-economic data to account for autonomous farmer adaptation. The simulations show crop failure rates increasing under climate change, due to increasing extremes of both heat and water stress. Crop failure rates increase with mean temperature, with increases in maximum failure rates being greater than those in median failure rates. The results suggest that significant adaptation is possible through either socio-economic measures such as greater investment, or biophysical measures such as drought or heat tolerance in crops. The results also show that adaptation becomes increasingly necessitated as mean temperature and the associated number of extremes rise. The results, and the limitations of this study, also suggest directions for research for linking climate and crop models, socio-economic analyses and crop variety trial data in order to prioritize options such as capacity building, plant breeding and biotechnology.

49 Stories That Make an Ultimate STEM Lesson Plan

Science.gov (United States)

Mehta, Swati; Mehta, Rohit; Berzina-Pitcher, Inese; Seals, Christopher; Mishra, Punya

2016-01-01

In this paper we reviewed what 49 large urban public school district STEM teachers enrolled in a year-long graduate certificate and fellowship program at a large Midwestern university considered as their amazing teaching moments. They were asked to share their amazing teaching moments that would make an Ultimate Lesson Plan in STEM. In smaller…

Safety related aspects of ultimate disposal of radioactive wastes

International Nuclear Information System (INIS)

Goemmel, R.

1992-01-01

Solutions and questions related to nuclear waste management are presented. In particular, long-term safety of repositories in Germany and Sweden is considered, with special attention being paid to methods of detection, geotechnical barriers and post-operational phase of salt dome repositories, and conditioning of wastes to make them fit for ultimate disposal. (DG) [de

Ultimate Gradient Limitation in Niobium Superconducting Accelerating Cavities

Energy Technology Data Exchange (ETDEWEB)

Checchin, Mattia [Illinois Inst. of Technology, Chicago, IL (United States); Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Grassellino, Anna [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Martinello, Martina [Illinois Inst. of Technology, Chicago, IL (United States); Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Posen, Sam [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Romanenko, Alexander [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Zasadzinski, John [Illinois Inst. of Technology, Chicago, IL (United States)

2016-06-01

The present study is addressed to the theoretical description of the ultimate gradient limitation in SRF cavities. Our intent is to exploit experimental data to confirm models which provide feed-backs on how to improve the current state-of-art. New theoretical insight on the cavities limiting factor can be suitable to improve the quench field of N-doped cavities, and therefore to take advantage of high Q₀ at high gradients.

Ultimate survival in anomalous ψ(2S) decays

International Nuclear Information System (INIS)

Gérard, Jean-Marc; Martini, Antony

2014-01-01

The hierarchy among the radiative γ(π 0 ,η,η ′ ) decay channels for the ψ ′ looks quite different from the J/ψ one. The fate of charm, namely an ultimate survival of on-shell cc ¯ intermediate states, might give us the clue for this new puzzle in exclusive charmonium decays. A similar self-preservation has already been invoked in the past to solve the so-called ρπ puzzle.

Reliability analysis of production ships with emphasis on load combination and ultimate strength

Energy Technology Data Exchange (ETDEWEB)

Wang, Xiaozhi

1995-05-01

This thesis deals with ultimate strength and reliability analysis of offshore production ships, accounting for stochastic load combinations, using a typical North Sea production ship for reference. A review of methods for structural reliability analysis is presented. Probabilistic methods are established for the still water and vertical wave bending moments. Linear stress analysis of a midships transverse frame is carried out, four different finite element models are assessed. Upon verification of the general finite element code ABAQUS with a typical ship transverse girder example, for which test results are available, ultimate strength analysis of the reference transverse frame is made to obtain the ultimate load factors associated with the specified pressure loads in Det norske Veritas Classification rules for ships and rules for production vessels. Reliability analysis is performed to develop appropriate design criteria for the transverse structure. It is found that the transverse frame failure mode does not seem to contribute to the system collapse. Ultimate strength analysis of the longitudinally stiffened panels is performed, accounting for the combined biaxial and lateral loading. Reliability based design of the longitudinally stiffened bottom and deck panels is accomplished regarding the collapse mode under combined biaxial and lateral loads. 107 refs., 76 refs., 37 tabs.

Determination of Ultimate Torque for Multiply Connected Cross Section Rod

Directory of Open Access Journals (Sweden)

V. L. Danilov

2015-01-01

Full Text Available The aim of this work is to determine load-carrying capability of the multiply cross-section rod. This calculation is based on the model of the ideal plasticity of the material, so that the desired ultimate torque is a torque at which the entire cross section goes into a plastic state.The article discusses the cylindrical multiply cross-section rod. To satisfy the equilibrium equation and the condition of plasticity simultaneously, two stress function Ф and φ are introduced. By mathematical transformations it has been proved that Ф is constant along the path, and a formula to find its values on the contours has been obtained. The paper also presents the rationale of the line of stress discontinuity and obtained relationships, which allow us to derive the equations break lines for simple interaction of neighboring circuits, such as two lines, straight lines and circles, circles and a different sign of the curvature.After substitution into the boundary condition at the end of the stress function Ф and mathematical transformations a formula is obtained to determine the ultimate torque for the multiply cross-section rod.Using the doubly connected cross-section and three-connected cross-section rods as an example the application of the formula of ultimate torque is studied.For doubly connected cross-section rod, the paper offers a formula of the torque versus the radius of the rod, the aperture radius and the distance between their centers. It also clearly demonstrates the torque dependence both on the ratio of the radii and on the displacement of hole. It is shown that the value of the torque is more influenced by the displacement of hole, rather than by the ratio of the radii.For the three-connected cross-section rod the paper shows the integration feature that consists in selection of a coordinate system. As an example, the ultimate torque is found by two methods: analytical one and 3D modeling. The method of 3D modeling is based on the Nadai�

LWR recycle--economic at what price U3O8

International Nuclear Information System (INIS)

Brandfon, W.W.; Hang, D.F.

1980-01-01

The Department of Energy has suggested that the Presidential decision to delay reprocessing is also an economic one. To test this hypothesis, a detailed economic analysis is currently being conducted by the Subcommittee on Financing the Nuclear Fuel Cycle of the Atomic Industrial Forum Committee on Financial Considerations. Two cycles studied for their economic impacts are illustrated. The first is the traditional closed fuel cycle upon which the nuclear power industry has based its planning. The second is the throwaway cycle or an open cycle which does not utilize the residual uranium and plutonium values contained in the spent nuclear fuel leaving power reactors. Instead, the fuel is stored and cooled at the reactor site and/or at an intermediary site prior to ultimate disposal in a waste repository. 28 refs

Consequences of the 1873 Economic Crisis for the Argentinian State Educational Design

Science.gov (United States)

Duarte, Oscar Daniel

2016-01-01

This article aims to explain the ultimate organisation of the Argentinian educational system during the 1870s as a result of the 1873 world economic crisis, which led, among other measures, to budget cuts. These had serious consequences in both curriculum design and the general structure of the different educational levels. Such a system fostered…

The ultimate challenge of pregnancy-associated breast carcinoma

International Nuclear Information System (INIS)

Raja, R.; Tahira, A.

2005-01-01

Pregnancy associated breast carcinoma requires making judicious use of all diagnostic modalities and the therapeutic options of surgery, irradiation, chemotherapy and hormonal therapy to enhance survival rates. Individualization of treatment for each patient is the key to success. The effects on future fertility, the time interval before next conception, and whether to breast feed or not are all well-documented. A multidisciplinary coordinated team approach to this ultimate challenge of patient care will prove fruitful. (author)

Ultimate survival in anomalous ψ(2S) decays

Energy Technology Data Exchange (ETDEWEB)

Gérard, Jean-Marc; Martini, Antony

2014-03-07

The hierarchy among the radiative γ(π{sup 0},η,η{sup ′}) decay channels for the ψ{sup ′} looks quite different from the J/ψ one. The fate of charm, namely an ultimate survival of on-shell cc{sup ¯} intermediate states, might give us the clue for this new puzzle in exclusive charmonium decays. A similar self-preservation has already been invoked in the past to solve the so-called ρπ puzzle.

Getting “Just Deserts” or Seeing the “Silver Lining”: The Relation between Judgments of Immanent and Ultimate Justice

Science.gov (United States)

Harvey, Annelie J.; Callan, Mitchell J.

2014-01-01

People can perceive misfortunes as caused by previous bad deeds (immanent justice reasoning) or resulting in ultimate compensation (ultimate justice reasoning). Across two studies, we investigated the relation between these types of justice reasoning and identified the processes (perceptions of deservingness) that underlie them for both others (Study 1) and the self (Study 2). Study 1 demonstrated that observers engaged in more ultimate (vs. immanent) justice reasoning for a “good” victim and greater immanent (vs. ultimate) justice reasoning for a “bad” victim. In Study 2, participants' construals of their bad breaks varied as a function of their self-worth, with greater ultimate (immanent) justice reasoning for participants with higher (lower) self-esteem. Across both studies, perceived deservingness of bad breaks or perceived deservingness of ultimate compensation mediated immanent and ultimate justice reasoning respectively. PMID:25036011

Transcending matter: physics and ultimate meaning.

Science.gov (United States)

Paulson, Steve; Frank, Adam; Kaiser, David; Maudlin, Tim; Natarajan, Priyamvada

2015-12-01

From the discovery of new galaxies and nearly undetectable dark energy to the quantum entanglement of particles across the universe, new findings in physics naturally elicit a sense of awe and wonder. For the founders of modern physics-from Einstein and Bohr to Heisenberg, Pauli, and Bohm-a fascination with deeper questions of meaning and ultimate reality led some of them to explore esoteric traditions and metaphysics. More recently, however, physicists have largely shunned such philosophical and spiritual associations. What can contemporary physics offer us in the quest to understand our place in the universe? Has physics in some ways become a religion unto itself that rejects the search for existential meaning? Discussion of these and related questions is presented in this paper. © 2015 New York Academy of Sciences.

Economic Analysis of Cikaso Mini Hydro Power Plant as a CDM Project for Increasing IRR

Directory of Open Access Journals (Sweden)

Irhan Febijanto

2013-12-01

Full Text Available Renewable energy fueled power generations are few developed by private sector in Indonesia. High-cost investment and low electricity selling price to PT PLN as a single buyer is main barriers for private sector to involve in the development of renewable energy fueled power generations. In this project, the economic feasibility of Mini Hydro Power Plant of Cikaso with capacity of 5.3 MW, located at Sukabumi Regency, West Java province was assessed. This project utilized revenue generated from carbon market to increase the economic feasibility. Procedure to register the project to United Nation for Climate Change Convention (UNFCCC as a Clean Development Mechanism project was explained in detail. Approved Consolidation Methodology (ACM 0002 Version 12.3.0 was used to calculate grid emission factor in Jawa-Bali-Madura the grid electricity system. It was calculated that the grid emission factor is 0.833 (t-CO2/MWh, and the carbon emission reduction generated for this project is 21,982 ton/year. From the analysis result, it can be proven that the additional revenue from carbon credit could increase the project IRR from 10.28% to 13.52%.

Parametric Study on Ultimate Failure Criteria of Elbow Piping Components in Seismically Isolated NPP

Energy Technology Data Exchange (ETDEWEB)

Hahm, Dae Gi; Ki, Min Kyu [KAERI, Daejeon (Korea, Republic of); Jeon, Bub Gyu; Kim, Nam Sik [Pusan National University, Busan (Korea, Republic of)

2016-05-15

It is well known that the interface pipes between isolated and non-isolated structures will become the most critical in the seismically isolated NPPs. Therefore, seismic performance of such interface pipes should be evaluated comprehensively especially in terms of the seismic fragility capacity. To evaluate the seismic capacity of interface pipes in the isolated NPP, firstly, we should define the failure mode and failure criteria of critical pipe components. Hence, in this study, we performed the dynamic tests of elbow components which were installed in a seismically isolated NPP, and evaluated the ultimate failure mode and failure criteria by using the test results. To do this, we manufactured 25 critical elbow component specimens and performed cyclic loading tests under the internal pressure condition. The failure mode and failure criteria of a pipe component will be varied by the design parameters such as the internal pressure, pipe diameter, loading type, and loading amplitude. From the tests, we assessed the effects of the variation parameters onto the failure criteria. For the tests, we generated the seismic input protocol of relative displacement between the ends of elbow component. In this paper, elbow in piping system was defined as a fragile element and numerical model was updated by component test. Failure mode of piping component under seismic load was defined by the dynamic tests of ultimate pipe capacity. For the interface piping system, the seismic capacity should be carefully estimated since that the required displacement absorption capacity will be increased significantly by the adoption of the seismic isolation system. In this study, the dynamic tests were performed for the elbow components which were installed in an actual NPPs, and the ultimate failure mode and failure criteria were also evaluated by using the test results.

A probabilistics safety assessment of ultimate response guidelines of Maanshan Nuclear Power Plant

Energy Technology Data Exchange (ETDEWEB)

Wang, P-Y.; Lee, M. [National Tsing Hua Univ., Hsinchu, Taiwan (China); Chao, C-C. [Inst. of Nuclear Energy Research, Taoyuan, Taiwan (China)

2014-07-01

Ultimate Response Guidelines (URGs) was proposed to mitigate the so called 'Fukushima type accident' of nuclear power plants (NPPs). As specified in URGs, if it is necessary, operators will depressurize the secondary side of steam generators (SGs) to bring in the low pressure water. The injection damages the economic value of the plant. However, the injection prevents the cladding temperature from rising above 1500 F (1089 K), which is the temperature that release of volatile fission products from gap is initiated. In the present study, the impact of URGs on the Core Damage Frequency (CDF) in a SBO (Station Blackout) accident of a Pressurized Water Reactor (PWR) designed by Westinghouse and adopts large dry containment is quantified. In the Base Case analysis of the study, the actions in the URGs are not considered. The CDF of SBO in the base case calculation is 2.49x10{sup -7} year. The actions specified in URGs can reduce CDF by 62%. The strategies in URGs are very effective in enhancing the reliability of decay heat removal via SG secondary side. Therefore, the implementation of these strategies can reduce the CDF of sequences involving late failure of AFWS. After the incorporation URGs, the dominant sequences of SBO are the sequences with seal failure. (author)

The Role and Importance of Local Economic Development in Urban Development: A Case of Harare

Directory of Open Access Journals (Sweden)

Gladys Mandisvika

2015-12-01

Full Text Available The study assessed the role and importance of Local Economic Development as a means of enhancing urban development paying particular attention to the regulators of Local Economic Development in Harare. Local Economic Development is a process which encourages partners from the community, public sector, private sector and non-governmental sectors to work collectively to create better conditions for economic growth and employment generation with the aim of improving the locality economic future and the quality of life for all citizens. The study was premised on the theory of competitive advantage which puts up that prosperity and wealth creation is determined by microeconomic factors and that prosperity means increasing the standards of living for the local people and ultimately their quality of life. Primary data for the research was gathered through observation and key informant interviews. Data on key stakeholders understanding on the concept of Local Economic Development, how it is being practised and how the current regulatory framework enhance or impinge on local people’s participation in Local Economic Development was collected. Secondary data was also collected from Harare’s 2014 budget, census and existing forward plans. The study revealed that the practice of Local Economic Development in Harare is biased towards the setting aside of land zoned for industrial and commercial uses and implementation of development control parameters. Small to Medium Enterprises and the informal sector have also been identified as the major forms of Local Economic Development that citizens are involved in. However, the study revealed that proper policy frameworks which guide practice of Local Economic Development initiatives were missing

The Influence of Groundwater Depletion from Irrigated Agriculture on the Tradeoffs between Ecosystem Services and Economic Returns.

Science.gov (United States)

Kovacs, Kent; West, Grant

2016-01-01

An irrigated agricultural landscape experiencing groundwater overdraft generates economic returns and a suite of ecosystem services (in particular, groundwater supply, greenhouse gases reduction, and surface water quality). Alternative land cover choices indicate tradeoffs among the value of ecosystem services created and the economic returns. These tradeoffs are explored using efficiency frontiers that determine the least value in ecosystem services that must be given up to generate additional economic returns. Agricultural producers may switch to irrigation with surface water using on-farm reservoirs and tail water recovery systems in response to groundwater overdraft, and this has consequences for the bundle of ecosystem service values and economic returns achievable from the landscape. Planning that accounts for both ecosystem service value and economic returns can achieve more value for society, as does the adoption of reservoirs though lowering the costs of irrigation, increasing groundwater levels, and reducing fuel combustion and associated GHG emissions from groundwater pumping. Sensitivity analyses of per unit value of ecosystem services, crop prices, and the groundwater and water purification model parameters indicate tradeoff among ecosystems service values, such as the use of a high-end social cost of carbon ultimately lowers groundwater supply and water purification value by more than 15%.

The Influence of Groundwater Depletion from Irrigated Agriculture on the Tradeoffs between Ecosystem Services and Economic Returns.

Directory of Open Access Journals (Sweden)

Kent Kovacs

Full Text Available An irrigated agricultural landscape experiencing groundwater overdraft generates economic returns and a suite of ecosystem services (in particular, groundwater supply, greenhouse gases reduction, and surface water quality. Alternative land cover choices indicate tradeoffs among the value of ecosystem services created and the economic returns. These tradeoffs are explored using efficiency frontiers that determine the least value in ecosystem services that must be given up to generate additional economic returns. Agricultural producers may switch to irrigation with surface water using on-farm reservoirs and tail water recovery systems in response to groundwater overdraft, and this has consequences for the bundle of ecosystem service values and economic returns achievable from the landscape. Planning that accounts for both ecosystem service value and economic returns can achieve more value for society, as does the adoption of reservoirs though lowering the costs of irrigation, increasing groundwater levels, and reducing fuel combustion and associated GHG emissions from groundwater pumping. Sensitivity analyses of per unit value of ecosystem services, crop prices, and the groundwater and water purification model parameters indicate tradeoff among ecosystems service values, such as the use of a high-end social cost of carbon ultimately lowers groundwater supply and water purification value by more than 15%.

Space and economics : An introduction to regional economics

NARCIS (Netherlands)

Heijman, W.J.M.; Schipper, R.A.

2010-01-01

The subject area Regional Economics is becoming more and more topical. This means that in economic analyses the production factor 'space' is of increasing importance. This study book aims to integrate space in the area of General Economics in an analytical way. Models and their applications play a

Ultimate explanations and suboptimal choice.

Science.gov (United States)

Vasconcelos, Marco; Machado, Armando; Pandeirada, Josefa N S

2018-07-01

Researchers have unraveled multiple cases in which behavior deviates from rationality principles. We propose that such deviations are valuable tools to understand the adaptive significance of the underpinning mechanisms. To illustrate, we discuss in detail an experimental protocol in which animals systematically incur substantial foraging losses by preferring a lean but informative option over a rich but non-informative one. To understand how adaptive mechanisms may fail to maximize food intake, we review a model inspired by optimal foraging principles that reconciles sub-optimal choice with the view that current behavioral mechanisms were pruned by the optimizing action of natural selection. To move beyond retrospective speculation, we then review critical tests of the model, regarding both its assumptions and its (sometimes counterintuitive) predictions, all of which have been upheld. The overall contention is that (a) known mechanisms can be used to develop better ultimate accounts and that (b) to understand why mechanisms that generate suboptimal behavior evolved, we need to consider their adaptive value in the animal's characteristic ecology. Copyright © 2018 Elsevier B.V. All rights reserved.

Landau damping: the mechanics model and its ultimate entropy gain

International Nuclear Information System (INIS)

Hannay, J H; Kluge, Michel

2011-01-01

Classical mechanics has only been invoked to account for Landau damping in a rather half-hearted way, alongside plasma perturbation theory. In particular this invocation is essential for the study of the saturation, or post-linear (or 'nonlinear') regime of the damping initiated by Dawson and O'Neill. By embracing mechanics wholeheartedly here, with its attendant phase space, one can access results, old and new, cleanly and directly, and with one fewer numerical integration for the post-linear regime. By using a summation technique familiar in semiclassical quantum mechanics (Poisson summation), the one remaining numerical integration can be much improved in accuracy. Also accessible from mechanics is the ultimate entropy gain. Though zero for any finite time (in the absence of coarse graining), the entropy gain is ultimately non-zero (at infinite time the required coarse graining is zero). It is calculated analytically by using the appropriate asymptotics, hitherto not fully exploited.

[Deniss Hanovs, Valdis Tēraudkalns: Ultimate Freedom - no choice] / Olaf Mertelsmann

Index Scriptorium Estoniae

Mertelsmann, Olaf, 1969-

2014-01-01

Arvustus: Deniss Hanovs, Valdis Tēraudkalns: Ultimate Freedom - no choice. The culture of authoritarianism in Latvia, 1934-1940. (Central and Eastern Europe. Reginal perspectives in global context, Bd. 2.) Brill. Leiden-Boston 2013

78 FR 77141 - U.S. Customs and Border Protection 2014 East Coast Trade Symposium: “Increasing Economic...

Science.gov (United States)

2013-12-20

..., 2013. Maria Luisa Boyce, Senior Advisor for Private Sector Engagement, Executive Director, Office of... Protection 2014 East Coast Trade Symposium: ``Increasing Economic Competitiveness Through Global Partnership... Competitiveness Through Global Partnership and Innovation.'' The format of the East Coast Trade Symposium will be...

The ultimate security bounds of quantum key distribution protocols

International Nuclear Information System (INIS)

Nikolopoulos, G.M.; Alber, G.

2005-01-01

Full text: Quantum key distribution (QKD) protocols exploit quantum correlations in order to establish a secure key between two legitimate users. Recent work on QKD has revealed a remarkable link between quantum and secret correlations. In this talk we report on recent results concerning the ultimate upper security bounds of various QKD schemes (i.e., the maximal disturbance up to which the two legitimate users share quantum correlations) under the assumption of general coherent attacks. In particular, we derive an analytic expression for the ultimate upper security bound of QKD schemes that use two mutually unbiased bases. As long as the two legitimate users focus on the sifted key and treat each pair of data independently during the post processing, our results are valid for arbitrary dimensions of the information carriers. The bound we have derived is well below the predictions of optimal cloning machines. The possibility of extraction of a secret key beyond entanglement distillation is also discussed. In the case of qutrits we argue that any eavesdropping strategy is equivalent to a symmetric one. For higher dimensions, however, such equivalence is generally no longer valid. (author)

Economic integration and cross-border economic organizations: The case of San Diego-Tijuana

Directory of Open Access Journals (Sweden)

Jorge Eduardo Mendoza Cota

2017-01-01

Full Text Available The economic integration between the United States and Mexico has affected the economic, political and social relations in the border region. The paper seeks to relate the increasing economic integration and business cycles of the economies of San Diego and Tijuana to the development of both national and binational economic organizations in the border region. The methodology of analysis uses both statistical estimations of the economic integration of San Diego and Tijuana and semi-structured interviews of economic organizations to analyze the increasing economic integration and the role and achievements of the cross-border economic organizations. The results showed that cross-border cooperation is predominately controlled by federal and state governments on both sides of the border. However, the main achievements of cross-border economic cooperation have been accomplished by local private organizations. The perspective of further local economic development greatly depends on both the possibility of increased involvement of federal governments and the growing encouragement of regional organizations.

Economic innovation and efficiency gains as the driving force for accelerating carbon dioxide emissions

Science.gov (United States)

Garrett, T. J.

2012-12-01

It is normally assumed that gains in energy efficiency are one of the best routes that society has available to it for stabilizing future carbon dioxide emissions. For a given degree of economic productivity less energy is consumed and a smaller quantity of fossil fuels is required. While certainly this observation is true in the instant, it ignores feedbacks in the economic system such that efficiency gains ultimately lead to greater energy consumption: taken as a global whole, they permit civilization to accelerate its expansion into the energy reserves that sustain it. Here this argument is formalized from a general thermodynamic perspective. The core result is that there exists a fixed, time-independent link between a very general representation of global inflation-adjusted economic wealth (units currency) and civilization's total capacity to consume power (units energy per time). Based on 40 years of available statistics covering more than a tripling of global GDP and a doubling of wealth, this constant has a value of 7.1 +/- 0.01 Watts per one thousand 2005 US dollars. Essentially, wealth is power. Civilization grows by dissipating power in order to sustain all its current activities and to incorporate more raw material into its existing structure. Growth of its structure is related to economic production, so more energy efficient economic production facilitates growth. Growth is into the reserves that sustain civilization, in which case there is a positive feedback in the economic system whereby energy efficiency gains ultimately "backfire" if their intended purpose is to reduce energy consumption and carbon dioxide emissions. The analogy that can be made is to a growing child: a healthy child who efficiently incorporates food into her structure grows quickly and is able to consume more in following years. Economically, an argument is made that, for a range of reasons, there are good reasons to refer to efficiency gains as economic "innovation", both for

Concept for an ultimate storage facility for heat-generating radioactive waste in clay stone in Germany

International Nuclear Information System (INIS)

Bollingerfehr, Wilhelm; Poehler, Matthias

2010-01-01

According to the German reference ultimate storage concept heat-generating radioactive waste from the operation of nuclear power stations should be stored permanently maintenance-free and in a non-recoverable manner in a salt formation. Within the framework of investigations into the utilisation of alternative host rocks a concept for an ultimate storage facility in clay stone was developed in an R and D project. For this purpose all important aspects of the design, development, operation and shutdown were taken into account for a model region in northern Germany. It was established that storage in 50 m deep vertical boreholes in a mine at a depth of about 350 m appears to be the most practical solution for an ultimate storage facility in clay stone. Compared to the reference concept in salt an ultimate storage facility in clay stone requires solid support of all mine openings with steel arches or shotcrete. Because of the lower maximum permissible temperature in the backfilling material (bentonite) the area required for the ultimate storage facility is about five times larger. A period of more than 100 years is estimated from survey to shutdown. (orig.)

Simulation-economic model of using the geothermal energy of Uzbekistan

International Nuclear Information System (INIS)

Mukhamedov, R.S.; Yuksel, B.

1990-01-01

Although a wide range of estimates with different authors have the common view that Soviet Central Asia is a region ranking among the first in the USSR in terms of geothermal resources which are economically feasible for exploitation. Uzbekistan has the highest potential in the region. The areas inside the republic's territory which have particularly high geothermal energy potential are: the Fergana fracture, specifically the Adrusman-Chust anomaly, the Ustyurt plateau, the southern coast of the Aral Sea, and a group of small artesian basins in the heart of the Kyzyl Kum desert. The ultimate goal of this paper is to construct a simulation-economic model with the following characteristics: minimum effect on the ecological situation in the republic; minimum cost; heat and mass transfer in geological and geothermal structures; economic parameters for different technological systems

Selection and evaluation of nuclear fuel cycle strategies. Technical and economic aspects

International Nuclear Information System (INIS)

Clarke, F.J.P.; Main, F.K.

1983-01-01

The original choices of thermal reactors and fuel cycles were largely determined by specific national circumstances and by experience and facilities acquired from defence-related programmes. These led to the development of LWRs in the USA and to the natural uranium/gas/graphite system in the United Kingdom and France, while Canada selected the HWR. Most countries with nuclear power programmes saw the plutonium-fuelled fast reactor, with its breeding potential, as the means to ensure that exhaustion of economic uranium resources would not prematurely curtail the contribution of nuclear power to world energy supplies. Fuel reprocessing was essential to this fuel cycle or indeed to other recycling options to make better use of the available uranium; it was also favoured for waste management reasons. Early expectations of nuclear power growth suggested that a transition from thermal to fast reactors would occur during the present century but the urgency has been reduced by world economic recession, slower increases in nuclear capacity and the continued availability of supplies of low-priced uranium. Reprocessing costs have risen and economics of scale favour large plants, which are therefore most likely to be built in countries with substantial thermal reactor capacities; these countries will be able to provide reprocessing services to others. As the ultimate strategic need for fast reactors has not been reduced by this slowdown it is important to continue the development and demonstration of fast-reactor technology and the associated fuel cycles. Uncertainties in future fuel prices mean that it could be advantageous to introduce fast reactors as soon as they become an economic, although not necessarily the most economic, choice. Notably, fast reactors may be installed initially when and where they become economic compared to coal-fired generation, in order to lay the foundation for more rapid expansion when economic break-even with thermal reactors occurs. (author)

Decision basis for a Danish ultimate storage for low and intermediate radioactive wastes

International Nuclear Information System (INIS)

2008-11-01

In 2003 the Danish Parliament consented to let the government start the preparation of a basis for decision on a Danish ultimate storage for low and intermediate radioactive wastes. The present report was prepared by a working group and it presents the final proposal for such a decision basis. The report describes the fundamental safety and environmental principles for establishing an ultimate storage, including determining the principles for site selection, storage construction, and safety analysis. In an appendix, the amount, types, and activity level of the Danish radioactive wastes are presented. (ln)

UHS, Ultimate Heat Sink Cooling Pond Analysis

International Nuclear Information System (INIS)

Codell, R.; Nuttle, W.K.

1998-01-01

1 - Description of program or function: Three programs model performance of an ultimate heat sink cooling pond. National Weather Service data is read and analyzed to predict periods of lowest cooling performance and highest evaporative loss. The data is compared to local site data for significant differences. Then the maximum pond temperature is predicted. Five programs model performance of an ultimate heat sink spray pond. The cooling performance, evaporative water loss, and drift water loss as a function of wind speed are estimated for a spray field. These estimates are used in conjunction with National Weather Service data to predict periods of lowest cooling performance and highest evaporative loss. This data is compared to local site data for significant differences. Then the maximum pond temperature is predicted. 2 - Method of solution: The transfer of heat and water vapor is modeled using an equilibrium temperature procedure for an UHS cooling pond. The UHS spray pond model considers heat, mass, and momentum transfer from a single water drop with the surrounding air, and modification of the surrounding air resulting from the heat, mass, and momentum transfer from many drops in different parts of a spray field. 3 - Restrictions on the complexity of the problem: The program SPRCO uses RANF, a uniform random number generator which is an intrinsic function on the CDC. All programs except COMET use the NAMELIST statement, which is non standard. Otherwise these programs conform to the ANSI Fortran 77 standard. The meteorological data scanning procedure requires tens of years of recorded data to be effective. The models and methods, provided as useful tool for UHS analyses of cooling ponds and spray ponds, are intended as guidelines only. Use of these methods does not automatically assure NRC approval, nor are they required procedures for nuclear-power-plant licensing

The Project Approach in Organization of Foreign Economic Activity as a Means of Increasing Competitiveness of Industrial Enterprise

Directory of Open Access Journals (Sweden)

Lazarenko Vladimir Ye.

2017-12-01

Full Text Available The article is aimed at studying the organization of foreign economic activity of industrial enterprise in case of introduction of project approach to its management. New conditions of doing business in terms of aircraft building enterprises, consisting in the transition to production according to international standards, require a modern approach to the solution of the range of issues. In conditions of limited internal financial resources of company and high expenses connected with entering the foreign market, it is extremely important to define the priority directions of foreign economic activity and the most optimal mechanisms of its organization and management. The functioning of the sphere of foreign economic activity of industrial enterprise in case of introduction of project approach to management has been analyzed. The essence, features and the main parameters of project approach as a means of increasing the competitiveness of enterprise have been defined. Priorities of the large-scale enterprise development strategy have been analyzed and suggested by means of carrying out the project method of organization of foreign economic activity.

Effect of Deep Drying and Torrefaction Temperature on Proximate, Ultimate Composition, and Heating Value of 2-mm Lodgepole Pine (Pinus contorta) Grind

Energy Technology Data Exchange (ETDEWEB)

Tumuluru, Jaya

2016-06-01

Deep drying and torrefaction is a thermal pretreatment method, where biomass is heated in the temperature range of 150–300°C in an inert or reduced environment. The process parameters like temperature and residence time has a significant impact on proximate, ultimate, and energy properties of the biomass. In the present study, torrrefaction experiments were conducted on 2 mm lodgepole pine grind using a thermogravimetric analyzer. Both deep drying and torrefaction temperature (160–270°C) and time (15–120 min) were selected. Torrefied samples were analyzed for proximate, ultimate and energy properties. Results indicated that moisture content decreased with increases in torrefaction temperature and time, where at 270°C and 120 min, the moisture content was found to be 1.15% (w.b.). Volatile content in the biomass decreased from about 80% to about 45%, and ash content increased from 0.77 to about 1.91% at 270°C and 120 min. The hydrogen, oxygen and sulfur content decreased to 3%, 28.24%, and 0.01 whereas carbon content and higher heating value increased to 68.86% and 23.67 MJ/kg at 270°C and 120 min. H/C and O/C ratio calculated at 270°C and 120 min residence time were about 0.56 and 0.47. This study indicated that higher torrefaction temperatures >230°C and residence time >15 min influenced the proximate, ultimate, and energy properties.

Ultimate analysis of PWR prestressed concrete containment subjected to internal pressure

International Nuclear Information System (INIS)

Hu, H.-T.; Lin, Y.-H.

2006-01-01

Numerical analyses are carried out by using the ABAQUS finite element program to predict the ultimate pressure capacity and the failure mode of the PWR prestressed concrete containment at Maanshan nuclear power plant. Material nonlinearity such as concrete cracking, tension stiffening, shear retention, concrete plasticity, yielding of prestressing tendon, yielding of steel reinforcing bar and degradation of material properties due to high temperature are all simulated with proper constitutive models. Geometric nonlinearity due to finite deformation has also been considered. The results of the analysis show that when the prestressed concrete containment fails, extensive cracks take place at the apex of the dome, the junction of the dome and cylinder, and the bottom of the cylinder connecting to the base slab. In addition, the ultimate pressure capacity of the containment is higher than the design pressure by 86%

Ultimate Limit State Model Basis for Assessment of Offshore Wind Energy Converters

DEFF Research Database (Denmark)

Thöns, Sebastian; Faber, M. H.; Rücker, W.

2012-01-01

then in combina-tion with the ultimate limit state requirements leads to the specific constitutive relations. As a result finite element models based on shell elements incorporating a structural and a loading model are introduced and described in detail. Applying these models the ultimate capacity of the support...... on the basis of literature review and measurement data from a prototype Multibrid M5000 support structure. In combination with the developed structural and loading models, sensitivity analyses in regard to the responses are peiformed to enhance the understanding and to refine the developed models. To this end...... variables on the responses including nonlinearity the refinement of the model is performed on a quantitative basis....

Energy system, electricity market and economic studies on increasing nuclear power capacity

International Nuclear Information System (INIS)

Forsstrom, J.; Pursiheimo, E.; Kekkonen, V.; Honkatukia, J.

2010-04-01

Objective of this research project is to examine effects of addition of nuclear capacity from three different angles by using energy system, electricity market and economic analysis. In each area the analysis is based on computational methods. Finland is a member of Nordic electricity market which is further connected to networks of Continental Europe and Russia. Due to the foreign connections Finland has been able to import inexpensive electricity from its neighboring countries and this state is expected to continue. Addition of nuclear capacity lowers electricity import demand, affects level of electricity price decreasingly and decreases shortfall of installed production capacity. Substantial additions of nuclear power capacity and generous import supply have disadvantageous effect on profitability of combined heat and power production. The development of import possibilities depends on progression of difficult-to-estimate balance between electricity consumption and production in the neighboring countries. Investments on nuclear power increase national product during the construction phase. Growth of employment is also rather significant, especially during the construction phase. In the long term permanent jobs will be created too. Increase of employment is held back by increasing real wages, but it is though evident that consumer purchasing power is improved due to these nuclear power developments. (orig.)

Blend-wall economics. Relaxing US ethanol regulations can lead to increased use of fossil fuels

International Nuclear Information System (INIS)

Zhang, Zibin; Qiu, Cheng; Wetzstein, Michael

2010-01-01

The US Environmental Protection Agency is currently considering a waiver allowing an increase in the fuel-ethanol blend limit (the 'blend wall') from 10% (E10) up to 15% (E15). Justifications for this waiver are reduced vehicle fuel prices and less consumption of petroleum gasoline leading to energy security. A theoretical examination of this waiver reveals an anomaly where a relaxation of this blend wall elicits a demand response. Under a wide range of elasticities, this demand response can actually increase the consumption of petroleum gasoline and thus lead to greater energy insecurity. The economics supporting this result and associated policy implications are developed and discussed. (author)

Blend-wall economics. Relaxing US ethanol regulations can lead to increased use of fossil fuels

Energy Technology Data Exchange (ETDEWEB)

Zhang, Zibin [Department of Economics at Zhejiang University, Hangzhou (China); Qiu, Cheng; Wetzstein, Michael [Department of Agricultural and Applied Economics, University of Georgia, Athens, Georgia 30602 (United States)

2010-07-15

The US Environmental Protection Agency is currently considering a waiver allowing an increase in the fuel-ethanol blend limit (the 'blend wall') from 10% (E10) up to 15% (E15). Justifications for this waiver are reduced vehicle fuel prices and less consumption of petroleum gasoline leading to energy security. A theoretical examination of this waiver reveals an anomaly where a relaxation of this blend wall elicits a demand response. Under a wide range of elasticities, this demand response can actually increase the consumption of petroleum gasoline and thus lead to greater energy insecurity. The economics supporting this result and associated policy implications are developed and discussed. (author)

Economic impact of a head and neck oncologic surgeon: the case mix index.

Science.gov (United States)

Jalisi, Scharukh; Sanan, Akshay; Mcdonough, Katie; Hussein, Khalil; Platt, Michael; Truong, Minh Tam; Couch, Marion; Burkey, Brian B

2014-10-01

Head and neck oncologic surgery is a time-consuming specialty that requires extensive resources and manpower. Case mix index (CMI) is used in evaluating the complexity and economic impact of surgeons. Head and neck oncologic surgeons generate significant revenue for hospitals, yet compensation is relatively low. Retrospective review of a tertiary hospital's case mix data for 605 otolaryngology admissions from 2009 to 2011 was performed. CMI comparison for head and neck oncologic surgeons versus general otolaryngology was performed. In an otolaryngology department of 9 surgeons; there was a significant difference (p 1) favoring head and neck oncologic surgeons. Head and neck oncologic surgeons increase the CMI for hospitals and ultimately influence the hospital's reimbursement. There is a need for increased collaboration between hospitals and departments in fostering and furthering their head and neck surgical oncology programs by taking CMI into consideration. © 2013 Wiley Periodicals, Inc.

ULtiMATE system for rapid assembly of customized TAL effectors.

Directory of Open Access Journals (Sweden)

Junjiao Yang

Full Text Available Engineered TAL-effector nucleases (TALENs and TALE-based constructs have become powerful tools for eukaryotic genome editing. Although many methods have been reported, it remains a challenge for the assembly of designer-based TALE repeats in a fast, precise and cost-effective manner. We present an ULtiMATE (USER-based Ligation Mediated Assembly of TAL Effector system for speedy and accurate assembly of customized TALE constructs. This method takes advantage of uracil-specific excision reagent (USER to create multiple distinct sticky ends between any neighboring DNA fragments for specific ligation. With pre-assembled templates, multiple TALE DNA-binding domains could be efficiently assembled in order within hours with minimal manual operation. This system has been demonstrated to produce both functional TALENs for effective gene knockout and TALE-mediated gene-specific transcription activation (TALE-TA. The feature of both ease-of-operation and high efficiency of ULtiMATE system makes it not only an ideal method for biologic labs, but also an approach well suited for large-scale assembly of TALENs and any other TALE-based constructions.

Truth Behind Economic Performance, Natural Resources and Attracting Foreign Direct Investment

Directory of Open Access Journals (Sweden)

Arthelo P. Palma

2016-10-01

Full Text Available Using a preliminary investigation and analysis on the latest data on GDP (Gross Domestic Product performance, GOI (Global Opportunity Index, Vulnerability Score, Readiness Score, and the number of resources of economic importance, exploratory or preliminary SEM (structural equation modelling was prompted on the recent available data of the 131 countries (n=131. The model was robust, addressing concerns about multivariate assumptions and other measures on the goodness of fit. It was found that the number of natural resources of economic importance plays a large role in the GDP performance. Thus, the preliminary symptom of Dutch disease continues to manifest for as long as each country aims for development, with their resources as ultimate enticing factors for foreign direct investment (FDI. In addition, economic growth is so far observed to be associated with the vulnerability of the country to climate change. Finally, economic growth was found to be linked to the negative impacts argued by the dependency theory. Implication on governance was discussed.

How robust is the relationship between economic freedom and economic growth?

NARCIS (Netherlands)

Sturm, JE; De Haan, J

Using various indicators for economic freedom, it is shown that increases in economic freedom are robustly related to economic growth. This conclusion holds even if the impact of outlying observations is taken into account. The level of economic freedom is not related to growth.

Population increase, economic growth, educational inequality, and income distribution: some recent evidence.

Science.gov (United States)

Ram, R

1984-04-01

The relationship between population increase, economic growth, education and income inequality was examined in a cross-section study based on data from 26 developing and 2 developed countries. As other studies have noted, high population growth is associated with a less equal income distribution. A 1 percentage point reduction in the rate of population growth tends to raise the income share of the poorest 80% in the less developed world by almost 5 percentage points and is associated with a 1.7 percentage point increase in the income share of the poorest 40%. The relationship between short-run income growth and equality, on the other hand, is strong and positive. Estimates suggest that a 1 percentage point increase in the short-run rate of growth of the gross domestic product (GDP) increases the income share of the bottom 80% by about 2 percentage points and that of the poorest 40% by almost 1 percentage point. Although higher mean schooling appears to be a mild equalizer, educational inequality does not appear to have an adverse effect on income distribution. Overall, these results challenge the widely held belief that there must be a growth-equity trade-off. Moreover, they suggest that the impact of educational inequality on income distribution may be different from that observed in earlier studies, implying a need for caution in using these earlier results as a basis for educational policy development.

Molar mass of poly(ethylene terephthalate) (PET) during ultimate uniaxial drawing

NARCIS (Netherlands)

Göschel, U.; Cools, P.J.C.H.

2000-01-01

The changes of the average molar mass Mw, Mn, Mz, and molar mass distributions during multistep uniaxial drawing of poly(ethylene terephthalate) (PET) to achieve ultimate mechanical properties have been studied in detail by means of size exclusion chromatography (SEC) with triple detection:

Molar-Mass of Poly(Ethylene-Terephthalate) (PET) During Ultimate Uniaxial Drawing

NARCIS (Netherlands)

Göschel, A.G.P.U.; Cools, P.J.C.H.

2000-01-01

The changes of the average molar mass Mw, Mn, Mz, and molar mass distributions during multistep uniaxial drawing of poly(ethylene terephthalate) (PET) to achieve ultimate mechanical properties have been studied in detail by means of size exclusion chromatography (SEC) with triple detection:

Ultimate refrigerating conditions, behavior turning and a thermodynamic analysis for absorption–compression hybrid refrigeration cycle

International Nuclear Information System (INIS)

Zheng Danxing; Meng Xuelin

2012-01-01

Highlights: ► Two novel fundamental concepts of the absorption refrigeration cycle were proposed. ► The interaction mechanism of compressor pressure increasing with other key-parameters was investigated. ► A set of optimal operating condition of hybrid refrigeration cycle was found. ► A simulation and investigation for R134a-DMF hybrid refrigeration cycle was performed. - Abstract: The absorption–compression hybrid refrigeration cycle has been considered as an effective approach to reduce the mechanical work consumption by using low-grade heat, such as solar energy. This work aims at studying the thermodynamic mechanism of the hybrid refrigeration cycle. Two fundamental concepts have been proposed, which are the ultimate refrigerating temperature (or the ultimate temperature lift) and the behavior turning. On the basis of that, the interaction mechanism of compressor pressure increasing with other key-parameters and the impact of compressor pressure increasing on the cycle performance have been investigated. The key-parameters include the concentration difference, the circulation ratio of working fluid, etc. The work points out that the hybrid refrigeration cycle performance varies with the change of compressor outlet pressure and depends on which one achieves dominance in the hybrid refrigeration cycle, the absorption sub-system or the compression sub-system. The behavior turning point during parameters changing corresponds to a maximum value of the heat powered coefficient of performance. In this case, the hybrid refrigeration cycle performance is optimal because the low-grade heat utilization is the most effective. In addition, to validate the theoretical analysis, a solar hybrid refrigeration cycle with R134a–DMF as working pair was simulated. The Peng–Robinson equation of state was adopted to calculate thermophysical properties when the reliability assessment of the prediction models on the available literature data of R134a–DMF system had been

Economic Developments on Perceived Safety, Violence, and Economic Benefits

Directory of Open Access Journals (Sweden)

Anthony Fabio

2015-01-01

Full Text Available Background. Emerging research highlights the promise of community- and policy-level strategies in preventing youth violence. Large-scale economic developments, such as sports and entertainment arenas and casinos, may improve the living conditions, economics, public health, and overall wellbeing of area residents and may influence rates of violence within communities. Objective. To assess the effect of community economic development efforts on neighborhood residents’ perceptions on violence, safety, and economic benefits. Methods. Telephone survey in 2011 using a listed sample of randomly selected numbers in six Pittsburgh neighborhoods. Descriptive analyses examined measures of perceived violence and safety and economic benefit. Responses were compared across neighborhoods using chi-square tests for multiple comparisons. Survey results were compared to census and police data. Results. Residents in neighborhoods with the large-scale economic developments reported more casino-specific and arena-specific economic benefits. However, 42% of participants in the neighborhood with the entertainment arena felt there was an increase in crime, and 29% of respondents from the neighborhood with the casino felt there was an increase. In contrast, crime decreased in both neighborhoods. Conclusions. Large-scale economic developments have a direct influence on the perception of violence, despite actual violence rates.

The future of health economics: The potential of behavioral and experimental economics

Directory of Open Access Journals (Sweden)

Fredrik Hansen

2015-05-01

Full Text Available Health care systems around the globe are facing great challenges. The demand for health care is increasing due to the continuous development of new medical technologies, changing demographics, increasing income levels, and greater expectations from patients. The possibilities and willingness to expand health care resources, however, are limited. Consequently, health care organizations are increasingly required to take economic restrictions into account, and there is an urgent need for improved efficiency. It is reasonable to ask whether the health economics field of today is prepared and equipped to help us meet these challenges. Our aim with this article is twofold: to introduce the fields of behavioral and experimental economics and to then identify and characterize health economics areas where these two fields have a promising potential. We also discuss the advantages of a pluralistic view in health economics research, and we anticipate a dynamic future for health economics.

Mutual Payments in Increase of the Level of Economic Security of Energy Generating Enterprises

Directory of Open Access Journals (Sweden)

Ruzhytskyi Andrіy V

2013-12-01

Full Text Available The article presents main approaches to the essence of the economic security of an enterprise notion, namely, approach of counter-action to threats, approach of successful market activity and approach of achievement of certain development goals; it identifies the role of economic security of energy generating enterprises in economic security of other subjects and the country in general; it offers definition of the economic security of an enterprise notion as a complex characteristic of the state of the enterprise that reflects the level of the enterprise possibility to ensure functioning and development; it marks out functional components of economic security, which are connected with mutual payments, namely, financial, personnel, technical and technological, political and legal, informational and interface ones; it presents connection of mutual payments with the level of financial component of economic security of enterprises, which envisages financial flow from or to the enterprise for changing the obligation status or its quantitative characteristics.

Wall roughness induces asymptotic ultimate turbulence

Science.gov (United States)

Zhu, Xiaojue; Verschoof, Ruben A.; Bakhuis, Dennis; Huisman, Sander G.; Verzicco, Roberto; Sun, Chao; Lohse, Detlef

2018-04-01

Turbulence governs the transport of heat, mass and momentum on multiple scales. In real-world applications, wall-bounded turbulence typically involves surfaces that are rough; however, characterizing and understanding the effects of wall roughness on turbulence remains a challenge. Here, by combining extensive experiments and numerical simulations, we examine the paradigmatic Taylor-Couette system, which describes the closed flow between two independently rotating coaxial cylinders. We show how wall roughness greatly enhances the overall transport properties and the corresponding scaling exponents associated with wall-bounded turbulence. We reveal that if only one of the walls is rough, the bulk velocity is slaved to the rough side, due to the much stronger coupling to that wall by the detaching flow structures. If both walls are rough, the viscosity dependence is eliminated, giving rise to asymptotic ultimate turbulence—the upper limit of transport—the existence of which was predicted more than 50 years ago. In this limit, the scaling laws can be extrapolated to arbitrarily large Reynolds numbers.

Big Numbers about Small Children: Estimating the Economic Benefits of Addressing Undernutrition.

Science.gov (United States)

Alderman, Harold; Behrman, Jere R; Puett, Chloe

2017-02-01

Different approaches have been used to estimate the economic benefits of reducing undernutrition and to estimate the costs of investing in such programs on a global scale. While many of these studies are ultimately based on evidence from well-designed efficacy trials, all require a number of assumptions to project the impact of such trials to larger populations and to translate the value of the expected improvement in nutritional status into economic terms. This paper provides a short critique of some approaches to estimating the benefits of investments in child nutrition and then presents an alternative set of estimates based on different core data. These new estimates reinforce the basic conclusions of the existing literature: the economic value from reducing undernutrition in undernourished populations is likely to be substantial.

Prisoner Fasting as Symbolic Speech: The Ultimate Speech-Action Test.

Science.gov (United States)

Sneed, Don; Stonecipher, Harry W.

The ultimate test of the speech-action dichotomy, as it relates to symbolic speech to be considered by the courts, may be the fasting of prison inmates who use hunger strikes to protest the conditions of their confinement or to make political statements. While hunger strikes have been utilized by prisoners for years as a means of protest, it was…

Financial Development and Economic Growth: Experiences of Selected Developing Economies

OpenAIRE

Ahmed, Syed; Horner, James; Rafiq, Rafiqul Bhuyan

2008-01-01

The last two decades of the twentieth century witnessed a series of financial reforms in emerging economics of Asia, Africa and Latin America. The seminal works of R.I. McKinnon and E.S. Shaw, which attribute the slow growth of these economies to financial repression, inspired many of these reforms. The McKinnon-Shaw thesis demonstrates how government regulations cause low savings and investment, and ultimately engender financial repression. Financial liberalization, in this view, creates mar...

Environmental and economic impacts of livestock productivity increase in sub-Saharan Africa.

Science.gov (United States)

Cardoso, Luis Alfaro

2012-12-01

Livestock production in sub-Saharan Africa (SSA) is not matching the annual 2.5 % growth of its population. Regional per capita meat and milk production corresponds, respectively, to about 13 and 8 % of developed countries indicators. Livestock performances in this region have decreased within the last 30 years. In fact, SSA, with a 12 % bovine extraction rate against a world average of 21 %, includes about 16 % of world cattle, only producing 6 and 2.6 % of global meat and milk, respectively. These low performances have economic and environmental consequences reflecting the necessity for upgrading livestock managing skills in the region. This effort includes various components such as sanitary prophylaxis, reproduction, nutrition, and in particular, substantial increase in livestock yield for human consumption. This will allow for an improved animal and pasture management and soil preservation, enhancing meat production and decreasing methane and nitrogen emissions from enteric fermentation and manure processing. These environmental gains due to increased livestock off-take rates can represent relevant credits in the global Environmental Carbon Market under the United Nations Framework Convention on Climate Change Kyoto protocol. These credits can be used for investments in livestock essential services and marketing facilities leading to improved productivity.

Method for ultimate disposition of borate containing radioactive wastes by vitrification

International Nuclear Information System (INIS)

Bege, D.; Faust, H.J.; Puthawala, A.; Stunkel, H.

1984-01-01

Method for the ultimate disposition of radioactive wastes by vitrification, in which weak to medium radioactive waste concentrates from borate-containing radioactive liquids are mixed with added glass-forming materials, maximally in a ratio of 1:3, and the mixture heated to obtain a glass-forming melt

The Role of Nuclear Power for Sustainable Development: Assessment of Nuclear Power's Contribution to National Economic Development

International Nuclear Information System (INIS)

Min, B. J.; Lee, M. K.; Ahn, S. K.

2008-04-01

The study begins with a short review of nuclear power development in Korea within the overall reference energy system. It then explores changing circumstances, present energy balances and ultimately the needs underpinning future electricity requirements. The major part of the study uses a model-based approach to analyze and quantify economic linkages between nuclear technologies and other economic sectors, and to assess various techno-economic futures that include nuclear generation for the Korean power sector, exploring for each future scenario the optimal electricity supply mix. The results of the analysis represents that the nuclear industry in the Republic of Korea has already made strong contributions to the growth of the country. It has been an integral part of the country's economic development, evolving from an import- to an export-oriented industry, providing spin-offs to Korean technological innovation as well as to socio-economic development such as infrastructure and education. Furthermore, the study provides some meaningful suggestions and recommendations in order to make sound decisions for sustainable energy policy and strategies, in particular for achieving a balance in nuclear power development and socio-economic development consistent with sustainable energy development goals. In general, these reflect the increasing national (public and private) participation in the nuclear industry. Specifically, the study identifies the nuclear relevant strategies in four dimensions: innovative nuclear technology development, nuclear human resource development and management (HRD and M), investment and financing of the nuclear technology and enhancement of institutional framework

BEHAVIORAL ECONOMICS AND THE NEED OF PSYCHOLOGY IN ECONOMIC RESEARCH

Directory of Open Access Journals (Sweden)

Andreea GRADINARU

2014-06-01

Full Text Available The turning point in economic science has now come, marked especially by triggering the biggest crisis since the Great Depression of '29-'33, has called into question the need to reconsider the status of economic science and finding ways in which it can increase its practical foundations. In the elaboration of this study I’ve took into account the fact that beyond any abstract, formal and mathematical model, economics is a science, having the man in its center. Furthermore, every economic process is based on the human being. But the way individuals behave does not follow precisely the pattern predicted by classical and neoclassical models, but most of the time they are making decisions under the influence of psychological factors. Starting from these assumptions I considered important to highlight a real need for psychology in economic research. Therefore, the aim of this work is exclusively theoretical meant to show that the study of psychological factors is necessary in economic research, because it allows a better explanation of the economic problems and lead to obtaining results closer to reality than those who only take into consideration economic factors. In this way I appealed to behavioral economics. This represents a new trend of economic thinking that reunites psychology with economy. The thing that I observed after finishing the study is that behavioral economics can increase the explanatory power of economics by providing more realistic psychological bases, because human behavior is not only the subject matter of economics but psychology too.

Tokyo Tech–Hitotsubashi Interdisciplinary Conference : New Approaches to the Analysis of Large-Scale Business and Economic Data

CERN Document Server

Takayasu, Misako; Takayasu, Hideki; Econophysics Approaches to Large-Scale Business Data and Financial Crisis

2010-01-01

The new science of econophysics has arisen out of the information age. As large-scale economic data are being increasingly generated by industries and enterprises worldwide, researchers from fields such as physics, mathematics, and information sciences are becoming involved. The vast number of transactions taking place, both in the financial markets and in the retail sector, is usually studied by economists and management and now by econophysicists. Using cutting-edge tools of computational analysis while searching for regularities and “laws” such as those found in the natural sciences, econophysicists have come up with intriguing results. The ultimate aim is to establish fundamental data collection and analysis techniques that embrace the expertise of a variety of academic disciplines. This book comprises selected papers from the international conference on novel analytical approaches to economic data held in Tokyo in March 2009. The papers include detailed reports on the market behavior during the finan...

Duties of the Physikalisch-Technische Bundesanstalt (PTB) in connection with radioactive waste safeguarding and ultimate storage

International Nuclear Information System (INIS)

Roethemeyer, H.

1977-01-01

An outline of the history and duties of the Physikalisch-Technische Bundesanstalt (PTB) is to illustrate that the new duties of the PTB in connection with radioactive substance safeguarding and ultimate storage fit in very well with the range of duties of the PTB. The organisatory and technical accomplishment of these duties in cooperation with a building and operating company and with industry is explained. The department of the PTB for the 'safeguarding and ultimate storage of radioactive wastes' has an examining, appraising and licensing function in connection with construction, operation and shutdown of safety facilities. Methods for the safeguarding and ultimate storage of all the radioactive wastes in the Federal Republic of Germany are described. (HS) [de

Perspectives of economics – behavioural economics

Directory of Open Access Journals (Sweden)

Paula-Elena DIACON

2013-07-01

Full Text Available The present turning point, accentuated by the crisis, has revitalized the interdisciplinary study of economics and determined the reconsideration of its fundamental bases as a social science. The economists have abandoned the traditional neoclassical sphere and have directed towards understanding the behaviour resorting to psychology and developing in this manner a new field - behavioural economics. This article examines whether this economic sub-discipline is a viable research direction and the extent to which it may increase the explanatory power of science by providing a realistic database for analysis, taking into account the complexity of the human factor.

Can Economic Model Transparency Improve Provider Interpretation of Cost-effectiveness Analysis? Evaluating Tradeoffs Presented by the Second Panel on Cost-effectiveness in Health and Medicine.

Science.gov (United States)

Padula, William V; McQueen, Robert Brett; Pronovost, Peter J

2017-11-01

The Second Panel on Cost-Effectiveness in Health and Medicine convened on December 7, 2016 at the National Academy of Medicine to disseminate their recommendations for conduct, methodological practices, and reporting of cost-effectiveness analyses (CEAs). Following its summary, panel proceedings included lengthy discussions including the field's struggle to disseminate findings efficiently through peer-reviewed literature to target audiences. With editors of several medical and outcomes research journals in attendance, there was consensus that findings of cost-effectiveness analyses do not effectively reach other researchers or health care providers. The audience members suggested several solutions including providing additional training to clinicians in cost-effectiveness research and requiring that cost-effectiveness models are made publicly available. However, there remains the questions of whether making economic modelers' work open-access through journals is fair under the defense that these models remain one's own intellectual property, or whether journals can properly manage the peer-review process specifically for cost-effectiveness analyses. In this article, we elaborate on these issues and provide some suggested solutions that may increase the dissemination and application of cost-effectiveness literature to reach its intended audiences and ultimately benefit the patient. Ultimately, it is our combined view as economic modelers and clinicians that cost-effectiveness results need to reach the clinician to improve the efficiency of medical practice, but that open-access models do not improve clinician access or interpretation of the economics of medicine.

LRFD software for design and actual ultimate capacity of confined rectangular columns.

Science.gov (United States)

2013-04-01

The analysis of concrete columns using unconfined concrete models is a well established practice. On the : other hand, prediction of the actual ultimate capacity of confined concrete columns requires specialized nonlinear : analysis. Modern codes and...

Long-term experience in salt mining and experience in salt mine decommissioning - a chance for ultimate storage?

International Nuclear Information System (INIS)

Sitz, P.; Rauche, H.

2003-01-01

The author discusses similarities between salt mining and ultimate storage and the possibility of using abandoned salt mines as ultimate storage site. He states that with all the numeric prediction tools now available, expert knowledge of mining engineers is still indispensable [de

Ultimate load capacities of expansion anchor bolts

International Nuclear Information System (INIS)

Czarnecki, R.M.; Manrique, M.A.; Samaddar, S.K.

1993-01-01

A summary of available experimental expansion anchor bolt test data is presented. These data were collected as part of programs by the nuclear industry to address generic issues related to verification of seismic adequacy of equipment in nuclear power plants. Some of the data presented are suitable for use in seismic probabilistic risk assessments. For example, mean values of ultimate strength, along with their standard deviation and coefficients of variation, for a range of most typical expansion anchor bolt sizes are presented. Effects of interaction between shear and tension, edge distance, spacing, and cracking of the concrete are presented in a manner that is more suitable for use in deterministic evaluations. Related industry programs to derive anchor bolt capacities are briefly discussed. Recommendations for areas of further investigation are also presented

Increasing efficiency in ethanol production: Water footprint and economic productivity of sugarcane ethanol under nine different water regimes in north-eastern Brazil

Energy Technology Data Exchange (ETDEWEB)

Chico, D.; Santiago, A. D.; Garrido, A.

2015-07-01

Ethanol production in Brazil has grown by 219% between 2001 and 2012, increasing the use of land and water resources. In the semi-arid north-eastern Brazil, irrigation is the main way for improving sugarcane production. This study aimed at quantifying water consumed in ethanol production from sugarcane in this region using the water footprint (WF) indicator and complementing it with an evaluation of the water apparent productivity (WAP). This way we were able to provide a measure of the crop´s physical and economic water productivity using, respectively, the WF and WAP concepts. We studied sugarcane cultivation under nine different water regimes, including rainfed and full irrigation. Data from a mill of the state of Alagoas for three production seasons were used. Irrigation influenced sugarcane yield increasing total profit per hectare and economic water productivity. Full irrigation showed the lowest WF, 1229 litres of water per litre of ethanol (L/L), whereas rainfed production showed the highest WF, 1646 L/L. However, the lower WF in full irrigation as compared to the rest of the water regimes implied the use of higher volumes of blue water per cultivated hectare. Lower water regimes yielded the lowest economic productivity, 0.72 US$/m3 for rainfed production as compared to 1.11 US$/m3 for full irrigation. Since economic revenues are increased with higher water regimes, there are incentives for the development of these higher water regimes. This will lead to higher general crop water and economic productivity at field level, as green water is replaced by blue water consumption. (Author)

The U.S. Gas Flooding Experience: CO2 Injection Strategies and Impact on Ultimate Recovery

Energy Technology Data Exchange (ETDEWEB)

Nunez-Lopez, Vanessa [The University of Texas at Austin; Hosseini, Seyyed; Gil-Egui, Ramon

2017-09-29

The Permian Basin in West Texas and southwestern New Mexico has seen 45 years of oil reserve growth through CO2 enhanced oil recovery (CO2 EOR). More than 60 CO2 EOR projects are currently active in the region’s limestone, sandstone and dolomite reservoirs. Water alternating gas (WAG) has been the development strategy of choice in the Permian for several technical and economic reasons. More recently, the technology started to get implemented in the much more porous and permeable clastic depositional systems of the onshore U.S. Gulf Coast. Continued CO2 injection (CGI), as opposed to WAG, was selected as the injection strategy to develop Gulf Coast oil fields, where CO2 injection volumes are significantly larger (up to 6 times larger) than those of the Permian. We conducted a compositional simulation based study with the objective of comparing the CO2 utilization ratios (volume of CO2 injected to produce a barrel of oil) of 4 conventional and novel CO2 injection strategies: (1) continuous gas injection (CGI), (2) water alternating gas (WAG), (3) water curtain injection (WCI), and (4) WAG and WCI combination. These injection scenarios were simulated using the GEM module from the Computer Modeling Group (CMG). GEM is an advanced general equation-of-state compositional simulator, which includes equation of state, CO2 miscible flood, CO2/brine interactions, and complex phase behavior. The simulator is set up to model three fluid phases including water, oil, and gas. Our study demonstrates how the selected field development strategy has a significant impact on the ultimate recovery of CO2-EOR projects, with GCI injection providing maximum oil recovery in absolute volume terms, but with WAG offering a more balanced technical-economical approach.

Rapid population growth and environmental degradation: ultimate versus proximate factors.

Science.gov (United States)

Shaw, R P

1989-01-01

This philosophical review of 2 arguments about responsibility for and solutions to environmental degradation concludes that both sides are correct: the ultimate and the proximal causes. Ultimate causes of pollution are defined as the technology responsible for a given type of pollution, such as burning fossil fuel; proximate causes are defined as situation-specific factors confounding the problem, such as population density or rate of growth. Commoner and others argue that developed countries with low or negative population growth rates are responsible for 80% of world pollution, primarily in polluting technologies such as automobiles, power generation, plastics, pesticides, toxic wastes, garbage, warfaring, and nuclear weapons wastes. Distortionary policies also contribute; examples are agricultural trade protection, land mismanagement, urban bias in expenditures, and institutional rigidity., Poor nations are responsible for very little pollution because poverty allows little waste or expenditures for polluting, synthetic technologies. The proximal causes of pollution include numbers and rate of growth of populations responsible for the pollution. Since change in the ultimate cause of pollution remains out of reach, altering the numbers of polluters can make a difference. Predictions are made for proportions of the world's total waste production, assuming current 1.6 tons/capita for developed countries and 0.17 tons/capita for developing countries. If developing countries grow at current rates and become more wealthy, they will be emitting half the world's waste by 2025. ON the other hand, unsustainable population growth goes along with inadequate investment in human capital: education, health, employment, infrastructure. The solution is to improve farming technologies in the 117 non-self-sufficient countries, fund development in the most unsustainable enclaves of growing countries, break institutionalized socio-political rigidity in these enclaves, and focus on

Integrated rice-duck farming decreases global warming potential and increases net ecosystem economic budget in central China.

Science.gov (United States)

Sheng, Feng; Cao, Cou-Gui; Li, Cheng-Fang

2018-05-31

Over the past decades, many attempts have been made to assess the effects of integrated rice-duck farming on greenhouse gas emissions, use efficient of energy, soil fertility, and economic significance. However, very few studies have been focused on the effects of the farming on net ecosystem economic budget (NEEB). Here, a 2-year field experiment was conducted to comprehensively investigate the effects of ducks raised in paddy fields on CH 4 and N 2 O emissions, global warming potential (GWP), rice grain yield, and NEEB in central China. The experiment included two treatments: integrated rice-duck farming (RD) and conventional rice farming (R). The introduction of ducks into the paddy fields markedly increased the rice grain yield due to enhanced tiller number and root bleeding rate. RD treatment significantly elevated the N 2 O emissions (p < 0.05) but decreased CH 4 emissions (p < 0.05) during rice growing seasons compared with R treatment. Analysis of GWP based on CH 4 and N 2 O emissions showed that compared with R treatment, RD treatment significantly decreased the GWP by 28.1 and 28.0% and reduced the greenhouse gas intensity by 30.6 and 29.8% in 2009 and 2010, respectively. In addition, RD treatment increased NEEB by 40.8 and 39.7% respectively in 2009 and 2010 relative to R treatment. Taken together, our results suggest that the integrated rice-duck farming system is an effective strategy to optimize the economic and environmental benefits of paddy fields in central China.

proximate and ultimate analysis of fuel pellets from oil palm residues

African Journals Online (AJOL)

HOD

Keywords: Oil Palm Residues, Fuel Pellets, Proximate Analysis, Ultimate Analysis. 1. INTRODUCTION ... Pelletizing of this biomass resources into pellets is a way of ensuring a ... demand for pellets [3], and alternative feed-stocks such as palm kernel ... agro-residues, selection of the best pellets has to be made based on ...

Energy, economics, environment and politics

International Nuclear Information System (INIS)

Foster, R.J.

1993-01-01

The pressure on the Earth's environment and resources is the ultimate result of population growth and the only humane means available for stabilizing world population is to increase per capita living standards in the developing countries. However, this will require a very large increase in global energy consumption. If, as at present, the energy demand is met largely by fossil fuels, atmospheric concentrations of CO 2 will rise rapidly. Until the end of the century, and perhaps beyond it, any actions to control CO 2 emissions will be taken for precautionary reasons alone, because no reliable basis will exist for predicting their global (or regional) impact on the climate. The sustainability of the natural environment is also under threat from human activities such as the clearing of forests for crop-growing and grazing. The resulting elimination of habitats for, and genetic variability in, the victor is as serious a concern as global warming. The economic and social consequences of rigidly curtailing the growth of energy use in developed countries would be severe, and in developing countries extreme; even then greenhouse gas build up could only be slowed not prevented. On the other hand, a wealthier world would be more able to bear the financial burden of protecting biodiversity. It is concluded that since the developed countries on whom the main cost would have to fall, adequate effort into both biodiversity and greenhouse gas reduction, biodiversity must take procedence. (1 figure, 2 tables). (UK)

Evaluation of time-accelerated irradiation method of elastomer by modulus-ultimate elongation profile

International Nuclear Information System (INIS)

Ito, Masayuki; Oka, Toshitaka; Hama, Yosimasa

2009-01-01

'Generalized modulus-ultimate elongation profile' was induced from the relationship between the modulus and the ultimate elongation of an elastomer that was quantitatively added crosslinking and scission. This profile can be used to evaluate the time-accelerated irradiation methods of ethylene-propylene-diene elastomer. The irradiation under low dose rate (0.33 kGy/h) at room temperature was the reference condition. The short-time irradiation condition was 4.2 kGy/h in 0.5 MPa oxygen at room temperature and 5.0 kGy/h in air at 70 o C. The former tended to bring about the higher ratio of scission than the reference condition; the latter tended to bring about the higher ratio of crosslinking.

Economic costs attributable to smoking in Hong Kong in 2011: a possible increase from 1998.

Science.gov (United States)

Chen, Jing; McGhee, Sarah; Lam, Tai Hing

2017-11-15

Reduction in smoking prevalence does not necessarily reduce the costs of smoking as evidence shows in developed countries. We provide up-to-date estimates for direct and indirect costs attributable to smoking in Hong Kong in 2011 and compare with our 1998 estimates. We took a societal perspective to include lives and life years lost, health care costs and time lost from work in the costing. We followed guidelines on estimating costs of active smoking for those aged 35 years or above (35+) and costs due to SHS exposure for 35+, infants aged 12 months and under and children aged 15 and below. All costs are in US$. We estimated that 6154 deaths among 35+ in Hong Kong in 2011 were attributable to active smoking, an increase of 10% from 1998. Besides, 672 deaths were attributable to SHS exposure, i.e. 10% of the total 6826 smoking-attributable deaths. The estimate of productive life lost due to deaths from active smoking by those aged under 65 years in 2011 was $166 million, an increase of about 4% over the estimate in 1998. Our conservative estimate of the annual tobacco-related disease cost in 2011 was $716 million which accounted for 0.3% of GDP. If we added the value of attributable lives lost, the annual cost would be $4.7 billion. Despite the reduction in smoking prevalence, smoking-attributable disease still imposes a substantial economic burden on Hong Kong society. These findings support more stringent and effective tobacco control legislation, polices and measures. Current evidence shows reduction in smoking prevalence does not necessarily reduce the economic costs of smoking. Most studies in developed countries employed a societal perspective, including costs of productivity loss and indirect costs, but not all studies estimated costs associated with second-hand smoking (SHS). The present study estimated the total costs of smoking in Hong Kong including direct and indirect costs attributable to active smoking and to SHS exposure. Our study confirms the

Economic and environmental effects of providing increased amounts of solid feed to veal calves.

Science.gov (United States)

Mollenhorst, H; Berentsen, P B M; Berends, H; Gerrits, W J J; de Boer, I J M

2016-03-01

Traditionally, veal calves receive most of their nutrients from milk replacer (MR). Nowadays, however, solid feed (SF; i.e., concentrates and roughages) increasingly substitutes for MR. Studies have shown that providing SF reduces different types of nonnutritive oral behaviors. The objective of this study was to assess the economic and environmental effects of substituting SF for MR in veal calf diets. With respect to environmental effects, we considered the emission of greenhouse gases and land occupation. Substitution rates were based on an experiment in which 160 calves were provided 2 mixtures of SF at 4 levels of dry matter (DM) intake. Mixtures of SF contained either 80% concentrates, 10% corn silage, and 10% straw on DM basis (C80) or 50% concentrates, 25% corn silage, and 25% straw (C50). The 4 levels of SF during the last 17 wk of the fattening period were 20, 100, 180, and 260 kg of DM SF. Additionally, provision of MR was adjusted to achieve equal rates of carcass gain. Substitution rates, representing the SF equivalent needed to substitute for 1 kg of DM MR, were 1.43 kg of DM for C80 and 1.61 kg of DM for C50. Economic effects were assessed based on prices and substitution rates of SF for MR and the possible penalty for carcass color. Environmental effects were assessed based on effects related to the production of feed ingredients, substitution rates, and changes in enteric methane emission and energy use for feed preparation. Costs of feeding SF needed to substitute for 1 kg of DM MR were €0.68 lower for C80 and €0.71 lower for C50, compared with the costs of feeding 1 kg of DM MR. When carcass color scores became too high, however, lower feeding costs were offset by lower revenues from meat. Emissions of greenhouse gases were hardly affected when SF intake was increased. In general, increased enteric methane emission were offset by lower emissions from feed production and energy use. Land occupation increased when intake of SF was increased

Effect of Deep Drying and Torrefaction Temperature on Proximate, Ultimate Composition, and Heating Value of 2-mm Lodgepole Pine (Pinus contorta) Grind.

Science.gov (United States)

Tumuluru, Jaya Shankar

2016-06-22

Deep drying and torrefaction compose a thermal pretreatment method where biomass is heated in the temperature range of 150-300 °C in an inert or reduced environment. The process parameters, like torrefaction temperature and residence time, have a significant impact on the proximate, ultimate, and energy properties. In this study, torrefaction experiments were conducted on 2-mm ground lodgepole pine ( Pinus contorta ) using a thermogravimetric analyzer. Both deep drying and torrefaction temperature (160-270 °C) and time (15-120 min) were selected. Torrefied samples were analyzed for the proximate, ultimate, and higher heating value. The results indicate that moisture content decreases with increases in torrefaction temperature and time, where at 270 °C and 120 min, the moisture content is found to be 1.15% (w.b.). Volatile content in the lodgepole pine decreased from about 80% to about 45%, and ash content increased from 0.77% to about 1.91% at 270 °C and 120 min. The hydrogen, oxygen, and sulfur content decreased to 3%, 28.24%, and 0.01%, whereas the carbon content and higher heating value increased to 68.86% and 23.67 MJ/kg at 270 °C and 120 min. Elemental ratio of hydrogen to carbon and oxygen to carbon (H/C and O/C) calculated at 270 °C and a 120-min residence time were about 0.56 and 0.47. Based on this study, it can be concluded that higher torrefaction temperatures ≥230 °C and residence time ≥15 min influence the proximate, ultimate, and energy properties of ground lodgepole pine.

Effect of Deep Drying and Torrefaction Temperature on Proximate, Ultimate Composition, and Heating Value of 2-mm Lodgepole Pine (Pinus contorta Grind

Directory of Open Access Journals (Sweden)

Jaya Shankar Tumuluru

2016-06-01

Full Text Available Deep drying and torrefaction compose a thermal pretreatment method where biomass is heated in the temperature range of 150–300 °C in an inert or reduced environment. The process parameters, like torrefaction temperature and residence time, have a significant impact on the proximate, ultimate, and energy properties. In this study, torrefaction experiments were conducted on 2-mm ground lodgepole pine (Pinus contorta using a thermogravimetric analyzer. Both deep drying and torrefaction temperature (160–270 °C and time (15–120 min were selected. Torrefied samples were analyzed for the proximate, ultimate, and higher heating value. The results indicate that moisture content decreases with increases in torrefaction temperature and time, where at 270 °C and 120 min, the moisture content is found to be 1.15% (w.b.. Volatile content in the lodgepole pine decreased from about 80% to about 45%, and ash content increased from 0.77% to about 1.91% at 270 °C and 120 min. The hydrogen, oxygen, and sulfur content decreased to 3%, 28.24%, and 0.01%, whereas the carbon content and higher heating value increased to 68.86% and 23.67 MJ/kg at 270 °C and 120 min. Elemental ratio of hydrogen to carbon and oxygen to carbon (H/C and O/C calculated at 270 °C and a 120-min residence time were about 0.56 and 0.47. Based on this study, it can be concluded that higher torrefaction temperatures ≥230 °C and residence time ≥15 min influence the proximate, ultimate, and energy properties of ground lodgepole pine.

Space and economics

NARCIS (Netherlands)

Klijs, Jeroen; Heijman, Wim J.M.; Peerlings, Jack H.M.; Rouwendal, Jan; Schipper, Rob A.

2017-01-01

The subject area Regional Economics has become topical. This means that in economic analyses the production factor 'space' is of increasing importance. This study book aims to integrate space in the area of General Economics in an analytical way. Models and their applications play a major role in

The Contemporary System of German Economic Diplomacy

Directory of Open Access Journals (Sweden)

Roman O. Raynkhardt

2015-01-01

Full Text Available The article deals with the description and analysis of functioning of the German national system of economic diplomacy. The author provides a brief summary of historical and economic background, stages and conditions of its development from the 1950-s to present time. He casts light upon the procedures and mechanisms of interaction between the key national economic-diplomatic agents i.e. ministries, agencies, other authorized bodies, public and private institutes outlining their usage of concrete economic, administrative and legal instruments in the course of respective policy measures. The author looks into the distinctive features which encompass the essence of the model: a two-level system with three pillars: foreign representations of the MFA, Germany Trade and Investment Agency, chambers of commerce. The above elements do not overlap each other's functions, but complement them; their functioning is based upon interministeriality and the single window concept. A special focus is made on the practice of economic-diplomatic agents, especially chambers of commerce, using private public partnership instruments. In general, notwithstanding recurring negative trends of the domestic and global business climate (oil crisis in the 1970-s, recession of the late 2000s - early 2010s the German economy demonstrated of high resistibility to exogenous shocks compared to other economies and according to the absolute values of its macroeconomic indicators. Alongside other economic and noneconomic factors this stability can to a certain extent be explained by an efficient system of economic diplomacy. Established in the 1970s it keeps on evolving in order to stand up to new challenges. At any stage of the business cycle it constitutes a pillar of the German economy and, ultimately, of the economy of the European Union.

Comparison between field data and ultimate heat-sink cooling-pond and spray-pond models

International Nuclear Information System (INIS)

Codell, R.

1982-09-01

Two previously published reports, NUREG-0693 and NUREG-0733, presented models and methods by which ultimate heat sink cooling ponds and spray ponds used for safety-related water supplies in nuclear power plants could be analyzed for design-basis conditions of heat load and meteorology. These models were only partially verified with field data. The present report compares the NRC models to data collected for NRC by Battelle Pacific Northwest Laboratories on the performance of small geothermally heated ponds and spray ponds. These comparisons generally support the conclusion that the NRC models are useful tools in predicting ultimate heat sink performance

Increasing efficiency in ethanol production: Water footprint and economic productivity of sugarcane ethanol under nine different water regimes in north-eastern Brazil

Directory of Open Access Journals (Sweden)

Daniel Chico

2015-06-01

Full Text Available Ethanol production in Brazil has grown by 219% between 2001 and 2012, increasing the use of land and water resources. In the semi-arid north-eastern Brazil, irrigation is the main way for improving sugarcane production. This study aimed at quantifying water consumed in ethanol production from sugarcane in this region using the water footprint (WF indicator and complementing it with an evaluation of the water apparent productivity (WAP. This way we were able to provide a measure of the crop´s physical and economic water productivity using, respectively, the WF and WAP concepts. We studied sugarcane cultivation under nine different water regimes, including rainfed and full irrigation. Data from a mill of the state of Alagoas for three production seasons were used. Irrigation influenced sugarcane yield increasing total profit per hectare and economic water productivity. Full irrigation showed the lowest WF, 1229 litres of water per litre of ethanol (L/L, whereas rainfed production showed the highest WF, 1646 L/L. However, the lower WF in full irrigation as compared to the rest of the water regimes implied the use of higher volumes of blue water per cultivated hectare. Lower water regimes yielded the lowest economic productivity, 0.72 US$/m3 for rainfed production as compared to 1.11 US$/m3 for full irrigation. Since economic revenues are increased with higher water regimes, there are incentives for the development of these higher water regimes. This will lead to higher general crop water and economic productivity at field level, as green water is replaced by blue water consumption.

Ultimate Electrical Means for Severe Accident and Multi Unit Event Management

International Nuclear Information System (INIS)

Guisez, Xavier

2015-01-01

Following the Multi Unit Severe Accident that occurred at Fukushima as a result of the tsunami on 11 March 2011, the European Council decided to submit its Nuclear Power Plants to a Stress Test. In Belgium, this Stress Test, named BEST (Belgian Stress Test), was successfully concluded at the end of 2011. Nevertheless, Electrabel decided, in agreement with the Authorities, to start a beyond design basis action plan, with the goal to mitigate the consequences of a Beyond Design Basis Accident and a Multi Unit Event. Consequently, this has led to an improvement of the robustness of its Nuclear Power Plants. Considering the importance of electrical power supply to a nuclear power plant, a significant part of this action plan consisted of setting up a mobile, 'plug and play' method for the electrical power supply to some major safety systems. In order to install this ultimate power supply, three factors were retained as essential. First, important reactor monitoring instrumentation is preserved. Second, core cooling is provided at all times. Finally, systems are easily made operational within a very short delay of time. During normal operation and Design Basis Events, core cooling is provided by High Voltage equipment. However, during high stress circumstances, it is too complex to realize connections on this equipment. Therefore, analysis was performed to realize core cooling with, easier to handle, Low Voltage equipment. These systems are powered by several GenSets, especially designed and manufactured for this application. The outcome of this project are easy to use, ultimate means, that supply electric power to important safety systems in order to drastically reduce the risk of core damage, during a beyond design basis event. Additionally, for all ultimate means, procedures and training modules were developed for the operators. (authors)

Recommendation for basis for decision on a Danish ultimate storage for low and intermediate radioactive wastes

International Nuclear Information System (INIS)

2006-12-01

In 2003 the Danish Parliament consented to let the government start the preparation of a basis for decision on a Danish ultimate storage for low and intermediate radioactive wastes. The present report is the result of the preparation process, and it describes the fundamental safety and environmental principles for establishing an ultimate storage, including determining the principles for the site selection, storage construction, and safety analyses. (LN)

A Technique for Temperature and Ultimate Load Calculations of Thin Targets in a Pulsed Electron Beam

DEFF Research Database (Denmark)

Hansen, Jørgen-Walther; Lundsager, Per

1979-01-01

A technique is presented for the calculation of transient temperature distributions and ultimate load of rotationally symmetric thin membranes with uniform lateral load and exposed to a pulsed electron beam from a linear accelerator. Heat transfer by conduction is considered the only transfer...... mechanism. The ultimate load is calculated on the basis of large plastic strain analysis. Analysis of one aluminum and one titanium membrane is shown....

Does increase in the depreciation expensing allowance spur economic growth? Evidence from USA

Directory of Open Access Journals (Sweden)

Xiaoli Yuan

2016-07-01

Full Text Available Despite substantial evidence that economic growth is influenced by taxation, the impact of Section 179 on GDP is unclear. Section 179 of the Internal Revenue Code enacted in 1958 has operated for several decades in the United States. In addition, in late 2010, two congressional acts affecting Section 179 have been passed, i.e. The Tax Relief Act of 2010 and The Small Business Jobs Act of 2010. The essence of these adoptions is to provide incentives for corporate as well as individual taxpayers. However, there are concerns as to the degree of economic growth these adoptions will provide. This research is therefore focused on showing the correlation between these Section 179 deductions, depreciation and economic growth as the Section 179 figures are debated and changed annually. The study suggests that annual increments of capital depreciation deductions will aid corporate growth as well as other variables that affect economic growth in the United States. However, the benefits for small business are lower than for corporations.

Analysis on the relationship between economic development and water environment pollution in Shandong province

Science.gov (United States)

Liu, Yi; Zhang, Zhengxian

2018-02-01

With the continuous development of the economy of the Shandong Province watershed, a large number of pollutant emission, resulting in water quality of the basin has undergone significant changes. To study the Shandong Province watershed economic development and the relationship between the discharge of pollutants, in this paper, the relationship between economic growth and pollutant emissions in the Shandong Province watershed was established by Shandong Province watershed in 2002-2015 per capita GDP and wastewater, COD, ammonia nitrogen(AN) pollutant emissions. The data were analyzed by software such as SPSS, and the cubic equation model between various pollutants and economic indexes was fitted. To further make the relationship between pollutants and economic development map to study the conventional pollutant emissions and economic development trends. It is found that only the relationship between industrial wastewater discharge and per capita GDP is most coordinated, that is, industrial wastewater emissions with the continuous development of the basin economy, showing a tendency to rise first and then fall. Finally, ultimately based on the results of the study of the water environment and economic development proposals were proposed.

Economic Evaluation of Climate Change Impacts and Adaptation in Italy

International Nuclear Information System (INIS)

Gambarelli, G.; Goria, A.

2004-07-01

The paper deals with the social and economic dimensions of climate change impacts and adaptation in Italy. The ultimate aim of the paper is to provide policy makers and experts with a conceptual framework, as well as methodological and operational tools for dealing with climate change impacts and adaptation from an economic perspective. In order to do so, first a conceptual and theoretical framework of the economic assessment of climate change impacts is presented and the state of the art about impact assessment studies is briefly analysed. Then, the Italian case is taken into account, by underlying the main impacts and adaptation challenges that are likely to be implied by climate change in the next decades. The analysis of the Italian case is particularly addressed through the description of the methodology and results of two case studies. The first one, dealing mainly with impact assessment, is carried out at the national level and is part of a EC funded project on Weather Impacts on Natural, Social and Economic Systems (WISE). The second one is carried out at the local level and focuses on sea level rise impacts and adaptation in a plane south of Rome. The two case studies allow to propose simple and flexible methodologies for the economic impact assessment and the economic valuation of adaptation strategies

Access to water provides economic relief through enhanced relationships in Kenya.

Science.gov (United States)

Zolnikov, Tara Rava; Blodgett-Salafia, Elizabeth

2017-03-01

Sub-Saharan Africa is comprised of low- and middle-income countries subject to the residual effects of chronic poverty. Poverty contributes to health disparities and social inequities. Public health strategies and solutions seek to remedy the effects of poverty. Providing access to quality water is one priority public health project that alleviates adverse health effects, but may have additional outcomes. Previous research has not thoroughly reviewed the economic relief and relationship changes from implemented water interventions. A qualitative phenomenological approach used 52 semi-structured interviews to understand relationship experiences among primary water gatherers and their families after implemented water interventions in a community. This study took place throughout the historically semi-arid eastern region in Kitui, Kenya, where community members have been beneficiaries of various water interventions. Prior to the water intervention, relationships were strained because of economic hardships. Households experienced economic difficulties in paying for children's school fees, buying bricks for housing structures, having water for house gardens, trees for shade in the compound, crops and providing water for their animals. After receiving access to water, relationships improved, because families were able to discuss and address economic challenges. Additional financial revenue was gained and used to pay for water to make bricks to sell or use on housing structures, expand on house gardens and agricultural crops, build new businesses, purchase water for animals, and construct local water spouts near the household. Access to water improved relationships, which encouraged economic growth. This information provides a critical component in understanding the interconnected nature between access to water, poverty and family relationships. Ultimately, this research suggests an increased need for access to quality water worldwide to improve both economic situations

Waste Field Characteristics, Ultimate Mixing and Dilution in Surface Discharge of Dense Jets into Stagnant Water Bodies

Directory of Open Access Journals (Sweden)

2012-04-01

Full Text Available Direct discharges of municipal and industrial waste waters into water bodies through marine outfalls are considered as a common way to dispose the generated waste in coastal zones. Marine discharge, intensifying flow mixing and entrainment, decrease the concentration of polutant up to accepted concentration and meet the guideline values and to make possible continues discharge of flow into matine environment. During last years due to quick development of coastal desalination plants, surface discharge of preduced salty water into seas and oceans has increased significantly. In this study, releases of dense jets from surface rectangular channel into stagnant bodies are experimentally studied. The location of flow plunge point, impact point and discharge ultimate dilution were drown out by a digital video technology. In addition, using some conductivity probes located in ambient floor, waste filed dilution in flow impact point and discharge ultimate dilution were identified. Finally the obtained results were plotted and explained along with some diagrams to show flow non-dimensional behavior. The results showed that the properties of flow are changing directly with ambient water depth and discharge initial fluxes.

Methodology for predicting ultimate pressure capacity of the ACR-1000 containment structure

International Nuclear Information System (INIS)

Saudy, A.M.; Awad, A.; Elgohary, M.

2006-01-01

The Advanced CANDU Reactor or the ACR-1000 is developed by Atomic Energy of Canada Limited (AECL) to be the next step in the evolution of the CANDU product line. It is based on the proven CANDU technology and incorporates advanced design technologies. The ACR containment structure is an essential element of the overall defense in depth approach to reactor safety, and is a physical barrier against the release of radioactive material to the environment. Therefore, it is important to provide a robust design with an adequate margin of safety. One of the key design requirements of the ACR containment structure is to have an ultimate pressure capacity that is at least twice the design pressure Using standard design codes, the containment structure is expected to behave elastically at least up to 1.5 times the design pressure. Beyond this pressure level, the concrete containment structure with reinforcements and post-tension tendons behaves in a highly non-linear manner and exhibits a complex response when cracks initiate and propagate. To predict the structural non-linear responses, at least two critical features are involved. These are: the structural idealization by the geometry and material property models, and the adopted solution algorithm. Therefore, detailed idealization of the concrete structure is needed in order to accurately predict its ultimate pressure capacity. This paper summarizes the analysis methodology to be carried out to establish the ultimate pressure capacity of the ACR containment structure and to confirm that the structure meets the specified design requirements. (author)

Experimental research on the ultimate strength of hard aluminium alloy 2017 subjected to short-time radioactive heating

International Nuclear Information System (INIS)

Dafang, Wu; Yuewu, Wang; Bing, Pan; Meng, Mu; Lin, Zhu

2012-01-01

Highlights: ► Ultimate strength at transient heating is critical to security design of missiles. ► We measure the ultimate strength of alloy 2017 subjected to transient heating. ► Experimental results at transient heating are lacking in strength design handbook. ► Ultimate strength of alloy 2017 experimented is much higher than handbook value. ► The results provide a new method for optimal design of high-speed flight vehicles. -- Abstract: Alloy 2017 (Al–Cu–Mg) is a hard aluminium alloy strengthened by heat treatment. Because of its higher strength, finer weldability and ductility, hard aluminium alloy 2017 has been widely used in the field of aeronautics and astronautics. However, the ultimate strength and other characteristic mechanical parameters of aluminium alloy 2017 in a transient heating environment are still unclear, as these key mechanical parameters are lacking in the existing strength design handbook. The experimental characterisation of these critical parameters of aluminium alloy 2017 is undoubtedly meaningful for reliably estimating life span of and improving safety in designing high-speed flight vehicles. In this paper, the high-temperature ultimate strength, loading time and other mechanical properties of hard aluminium alloy 2017 under different transient heating temperatures and loading conditions are investigated by combining a transient aerodynamic heating simulation system and a material testing machine. The experimental results reveal that the ultimate strength and loading capability of aluminium alloy 2017 subjected to transient thermal heating are much higher than those tested in a long-time stable high-temperature environment. The research of this work not only provides a substantial basis for the loading capability improvement and optimal design of aerospace materials and structures subject to transient heating but also presents a new research direction with a practical application value.

Determinants of economic freedom of the Association of Southeast Asian Nation economic community

Directory of Open Access Journals (Sweden)

Karen Debbie C. Magallon

2016-01-01

Full Text Available One of the determinants of the well-being of people across the world is economic freedom. It is the freedom to choose the ways to produce, sell, and use your private resources, while respecting rights of the other to practice the same. The primordial intention of the study was to investigate the factors affecting economic freedom in the Association of Southeast Asian Nations (ASEAN Economic Community. Human Development Index (HDI, Corruption Perceptions Index (CPI and GDP per capita are dimensions considered to characterize the level of a country’s economic freedom. Trend performance of AEC in these indexes was also determined. The empirical estimate was based on a panel dataset covering 6 member-countries of the ASEAN Economic Community from 2001 to 2010. The model was estimated through Ordinary Least Squares (OLS multiple linear regression analysis. For the trend performance of the indexes, Singapore found to have a remarkable performance. The empirical result strongly suggests that CPI and GDP per capita foster economic freedom. For every 1% decrease in CPI would lead to an increase in economic freedom index by.121 % and for every 1% increase in GDP per capita, EFI will increase by .019%.

Procedure for calculating estimated ultimate recoveries of Bakken and Three Forks Formations horizontal wells in the Williston Basin

Science.gov (United States)

Cook, Troy A.

2013-01-01

Estimated ultimate recoveries (EURs) are a key component in determining productivity of wells in continuous-type oil and gas reservoirs. EURs form the foundation of a well-performance-based assessment methodology initially developed by the U.S. Geological Survey (USGS; Schmoker, 1999). This methodology was formally reviewed by the American Association of Petroleum Geologists Committee on Resource Evaluation (Curtis and others, 2001). The EUR estimation methodology described in this paper was used in the 2013 USGS assessment of continuous oil resources in the Bakken and Three Forks Formations and incorporates uncertainties that would not normally be included in a basic decline-curve calculation. These uncertainties relate to (1) the mean time before failure of the entire well-production system (excluding economics), (2) the uncertainty of when (and if) a stable hyperbolic-decline profile is revealed in the production data, (3) the particular formation involved, (4) relations between initial production rates and a stable hyperbolic-decline profile, and (5) the final behavior of the decline extrapolation as production becomes more dependent on matrix storage.

Development of mechanisms and instruments of increasing economic safety with regard to the peculiarities of the present stage of the economy

Directory of Open Access Journals (Sweden)

Yu. M. Sokolinskaya

2017-01-01

Full Text Available The development of theoretical provisions of economic security, their mechanisms and instruments is determined by the laws of the economy that reveal the management of production, the market processes of distribution, exchange, consumption, taking into account the features of industries, regions, the level of globalization, etc. Each sphere, region or branch of the economy is characterized by peculiar economic processes justified by a specific approach to their disclosure. Economic security, its emergence, development and adaptation to changing market conditions, is based on the information economy or on the knowledge economy. Economic security is determined by the costs of information, its confidentiality, taking into account the interaction, on the one hand, and the competition of various enterprises, regions and countries, on the other. In the process of economic development, knowledge in general and any specialists are needed, but only those that are necessary in the economy. Communication and interaction of science, knowledge, information with production provides not only economic security, but also their successful development. To develop certain principles or laws for the interaction of technological and economic factors, their degree and level of interaction, a study of economic activity was conducted. In the present study, a civilizational approach was used that is based on the determining role of man in the economy and society and the importance of knowledge and information, when the important mechanisms remain: the development of technology and technology, the role of knowledge and information, and communication. The implementation of the civilized approach takes into account the new methodological level of increasing economic security, when the main factor in the development of the economy is the scientific and technological progress that justifies the information path of economic development.

Focused ion beam technology and ultimate applications

International Nuclear Information System (INIS)

Gierak, Jacques

2009-01-01

In this topical review, the potential of the focused ion beam (FIB) technology and ultimate applications are reviewed. After an introduction to the technology and to the operating principles of liquid metal ion sources (LMIS), of ion optics and instrument architectures, several applications are described and discussed. First, the application of FIB for microcircuit inspection, metrology and failure analysis is presented. Then, we introduce and illustrate some advanced patterning schemes we propose as next generation FIB processing examples. These patterning schemes are (i) local defect injection or smoothing in magnetic thin film direct patterning, (ii) functionalization of graphite substrates to guide organization of clusters, (iii) local and selective epitaxy of III–V semiconductor quantum dots and (iv) FIB patterned solid-state nanopores for biological molecules manipulation and analysis. We conclude this work by giving our vision of the future developments for FIB technology. (topical review)

Structural Change, Economic Growth and the Environmental Kuznets Curve. A Theoretical Perspective

International Nuclear Information System (INIS)

De Groot, H.L.F.

1999-01-01

The question of whether economic growth will ultimately resolve environmental problems has recently been discussed in a mainly empirical literature. One of the mechanisms that can explain the finding of an inverted U-shaped relationship between income and emissions relies on the changes in the sectoral composition of economies associated with economic growth. This paper develops a multi-sector general-equilibrium model to study the dynamic relationships between technological progress, economic development, the sectoral composition of economies and emissions. In the model, structural change is the outcome of a complex interplay between factors of demand and supply, and results from both differences in technological progress on a sectoral level and from differences in income elasticities of demand for different goods. We will derive under what conditions such changes can give rise to a hump-shaped relationship between per capita income and emissions. 39 refs

Skill-based immigration, economic integration, and economic performance

OpenAIRE

Aydemir, Abdurrahman

2014-01-01

Studies for major immigrant-receiving countries provide evidence on the comparative economic performance of immigrant classes (skill-, kinship-, and humanitarian-based). Developed countries are increasingly competing for high-skilled immigrants, who perform better in the labor market. However, there are serious challenges to their economic integration, which highlights a need for complementary immigration and integration policies.

Management and ultimate storage of wastes from nuclear power generation

International Nuclear Information System (INIS)

1989-09-01

The annotation on R and D prorgam 86 parts I-II have been brought together in the present report part I, together with some general viewpoints, and been classified according to subject. Part II of the present report comprises viewpoints of 'Research Program 1987-1992' and part III of 'Alternative methods of ultimate storage'. Swedish and French viewpoints are presented in Swedish, the remaining foreign material in English. The comments are grouped in subject catergories. (O.S.)

Ultimate uniaxial compressive strength of stiffened panel with opening under lateral pressure

Directory of Open Access Journals (Sweden)

Chang-Li Yu

2015-03-01

Full Text Available This paper concentrated on the ultimate uniaxial compressive strength of stiffened panel with opening under lateral load and also studied the design-oriented formulae. For this purpose, three series of well executed experiments on longitudinal stiffened panel with rectangular opening subjected to the combined load have been selected as test models. The finite element analysis package, ABAQUS, is used for simulation with considering the large elasticplastic deflection behavior of stiffened panels. The feasibility of the numerical procedure is verified by a good agreement of experimental results and numerical results. More cases studies are executed employing nonlinear finite element method to analyze the influence of design variables on the ultimate strength of stiffened panel with opening under combined pressure. Based on data, two design formulae corresponding to different opening types are fitted, and accuracy of them is illustrated to demonstrate that they could be applied to basic design of practical engineering structure.

Adobe Photoshop CS5 for Photographers The Ultimate Workshop

CERN Document Server

Evening, Martin

2010-01-01

If you already have a good knowledge of Adobe Photoshop and are looking to advance your skills, Adobe Photoshop CS5 for Photographers: The Ultimate Workshop is the book you've been waiting for.  Renowned photographers Martin Evening and Jeff Schewe impart their Photoshop tips and workflow, showing you how to use a vast array of rarely seen advanced Photoshop techniques.  Whether the subject is serious retouching work, weird and wonderful compositions, or planning a shoot before you've even picked up a camera, you can be sure that the advice is based on years of practical experience.

Classification of radioactive waste and determination of waste specifications as well as conditions of acceptance for ultimate storage

International Nuclear Information System (INIS)

Merz, E.

1983-04-01

The determination of waste specification and conditions of acceptance must follow a certain scheme, the basics of which will be presented. First the types of waste and the ultimate storage facilities will be characterized. The various categories of waste will be listed in a universally valid system, and the preliminary conditioning options will be determined. Based on the results of safety analysis taking into account the whole system - geological circumstances, ultimate store mines, types and forms of waste - specifications for the various ultimate store products are to be derived following iterative methods. Suggestions though not of a binding nature and probably subject to eventual revisions in part will be presented. To ensure the safety goals, i.e. the exclusion of radioactivity from the human biosphere, appropriate quality control is required concerning the production and the acceptance at the ultimate store. The guiding principles to be heeded will be discussed in brief. (orig./HP) [de

Economic cost of increased somatic cell count in South African dairy ...

African Journals Online (AJOL)

cuthbert

2014-06-24

Jun 24, 2014 ... Relative economic values, standardized to the value of protein, were ... as somatic cell count (SCC), is the most widely used measure of raw milk quality. .... Milk (l). Fat (kg). Protein (kg). Calving interval (days). Live weight (kg).

Too many journals? Towards a theory of repeated rejections and ultimate acceptance

NARCIS (Netherlands)

Oosterhaven, Jan

Under a set of reasonable assumptions, it is shown that all manuscripts submitted to any journal will ultimately be published, either by the first journal or by one of the following journals to which a manuscript is resubmitted. This suggests that low quality manuscripts may also be published, which

Magnetic surfaces, particle orbits and neutral injection in conventional and ultimate torsatrons

International Nuclear Information System (INIS)

Anderson, D.T.; Derr, J.A.; Kruckewitt, T.; Shohet, J.L.; Rehker, S.; Tataronis, J.A.

1979-01-01

Capabilities in fully non-axisymmetric numerical methods have resulted in a parametric study of various conventional and ultimate torsatron configurations. No superbananas are found in torsatrons without local magnetic wells. Neutral injection calculations show that, if the vacuum magnetic surfaces are well defined, tangential injection is very efficient

National approach to economic performance indicators for nuclear power plants: USA

International Nuclear Information System (INIS)

2006-01-01

The structure of the US electric power industry comprises a combination of traditional electric utilities and less traditional electricity producing companies. The electric utilities include investor owned, publicly owned, federal and cooperative firms. Approximately three quarters of the electricity generated by utilities is generated by investor owned companies. These utilities are, for the most part, franchised monopolies that have an obligation to provide electricity to all customers within a service area. Most provide for the generation, transmission and distribution of electricity, although the distinctions between these services are breaking down as the electricity industry becomes more deregulated. The shares are publicly traded and their areas of business operation are expanding into new ones, sometimes unrelated to the provision of electricity or even energy. Under deregulation and open market pricing of electricity, the business and financial success of operating nuclear plants must be considered to a much greater extent along with the successful achievement of safety and reliability objectives. In developing strategic and operational goals, nuclear plant managers are required to embrace clear and measurable business objectives and goals that not only assure the achievement of safety and reliability but, in addition, eliminate unnecessary costs and identify investment opportunities. These goals must balance operating and safety risk while optimizing plant revenues and earnings and ultimately ensure the profitability of electricity generating facilities. In doing so, it is essential that plant managers articulate goal achievement through the application of effective, measurable, economic performance indicators. Individual nuclear plants will sell their output competing on electricity price, ultimately to ensure the safe, reliable and economic dispatch of their generation either onto open spot markets or by competitive bidding for bilateral contracts. In

ZIO: The Ultimate Linux I/O Framework

CERN Document Server

Gonzalez Cobas, J D; Rubini, A; Nellaga, S; Vaga, F

2014-01-01

ZIO (with Z standing for “The Ultimate I/O” Framework) was developed for CERN with the specific needs of physics labs in mind, which are poorly addressed in the mainstream Linux kernel. ZIO provides a framework for industrial, high-bandwith, high-channel count I/O device drivers (digitizers, function generators, timing devices like TDCs) with performance, generality and scalability as design goals. Among its features, it offers abstractions for • both input and output channels, and channel sets • run-time selection of trigger types • run-time selection of buffer types • sysfs-based configuration • char devices for data and metadata • a socket interface (PF ZIO) as alternative to char devices In this paper, we discuss the design and implementation of ZIO, and describe representative cases of driver development for typical and exotic applications: drivers for the FMC (FPGAMezzanine Card, see [1]) boards developed at CERN like the FMC ADC 100Msps digitizer, FMC TDC timestamp counter, and FMC DEL ...

Ultimately short ballistic vertical graphene Josephson junctions

Science.gov (United States)

Lee, Gil-Ho; Kim, Sol; Jhi, Seung-Hoon; Lee, Hu-Jong

2015-01-01

Much efforts have been made for the realization of hybrid Josephson junctions incorporating various materials for the fundamental studies of exotic physical phenomena as well as the applications to superconducting quantum devices. Nonetheless, the efforts have been hindered by the diffusive nature of the conducting channels and interfaces. To overcome the obstacles, we vertically sandwiched a cleaved graphene monoatomic layer as the normal-conducting spacer between superconducting electrodes. The atomically thin single-crystalline graphene layer serves as an ultimately short conducting channel, with highly transparent interfaces with superconductors. In particular, we show the strong Josephson coupling reaching the theoretical limit, the convex-shaped temperature dependence of the Josephson critical current and the exceptionally skewed phase dependence of the Josephson current; all demonstrate the bona fide short and ballistic Josephson nature. This vertical stacking scheme for extremely thin transparent spacers would open a new pathway for exploring the exotic coherence phenomena occurring on an atomic scale. PMID:25635386

The Assessment of the Ultimate Hull Girder Strength of RO-RO Ship after Damages

Science.gov (United States)

Zubair Muis Alie, Muhammad; Sitepu, Ganding; Izaak Latumahin, Samuel

2018-03-01

Many accidents of Ro-Ro ships happen in Indonesia such as collision and grounding. When the collision or grounding takes place on the Ro-Ro ship, the ultimate strength of hull structure after damage becomes decrease. Car and passenger decks are critical location since collision and/or grounding occur. In the present study, the assessment of the ultimate hull girder strength is conducted. The cross section of Ro-Ro ship is taken to be analyzed. The collision and grounding damages are assumed to be palced on the side and bottom area, respectively. The damages are created by removing the element from the side shell and bottom part. Finally, the result obtained is compared with one another.

APPLYING THE THEORY OF CONSTRAINTS TO INCREASE ECONOMIC VALUE ADDED: PART 1—THEORY

Directory of Open Access Journals (Sweden)

Malan Smith

2012-01-01

Full Text Available

ENGLISH ABSTRACT: This article, presented in two parts, explains how to apply the Theory of Constraints (TOC in a business to increase Economic Value Added (EVA. The first part deals with the theory, while the second part deals with the implementation. The goal of a business, the measurements of the goal and the priority of the measurements are discussed. The future reality of a company which implements TOC principles is shown through cause and effect to lead to an increase in EVA. The increase in EVA is caused by an increase in return on investment and a reduction in the cost of capital. The actions the company must take to increase EVA is presented.

AFRIKAANSE OPSOMMING: Hierdie artikel, aangebied in twee dele, verduidelik hoe om die Teorie van Beperkinge (TVB in a besigheid toe te pas om Ekonomiese Toegevoegde Waarde (ETW te vermeerder. Die eerste gedeelte verduidelik die teorie, terwyl die tweede gedeelte die toepassing hanteer. Die doel van ’n besigheid, die maatstawwe van die doel en die prioriteit van die maatstawwe word bespreek. Deur middel van oorsaak en effek word gewys dat die toekomstige werklikheid van ’n besigheid wat TVB beginsels toepas lei tot ’n toename in ETW. Die toename in ETW word veroorsaak deur ’n toename in opbrengs op belegging en ’n afname in die koste van kapitaal. Die aksies wat ’n besigheid moet neem om ETW te vermeerder, word genoem.

Prediction of Local Ultimate Strain and Toughness of Trabecular Bone Tissue by Raman Material Composition Analysis

Directory of Open Access Journals (Sweden)

Roberto Carretta

2015-01-01

Full Text Available Clinical studies indicate that bone mineral density correlates with fracture risk at the population level but does not correlate with individual fracture risk well. Current research aims to better understand the failure mechanism of bone and to identify key determinants of bone quality, thus improving fracture risk prediction. To get a better understanding of bone strength, it is important to analyze tissue-level properties not influenced by macro- or microarchitectural factors. The aim of this pilot study was to identify whether and to what extent material properties are correlated with mechanical properties at the tissue level. The influence of macro- or microarchitectural factors was excluded by testing individual trabeculae. Previously reported data of mechanical parameters measured in single trabeculae under tension and bending and its compositional properties measured by Raman spectroscopy was evaluated. Linear and multivariate regressions show that bone matrix quality but not quantity was significantly and independently correlated with the tissue-level ultimate strain and postyield work (r=0.65–0.94. Principal component analysis extracted three independent components explaining 86% of the total variance, representing elastic, yield, and ultimate components according to the included mechanical parameters. Some matrix parameters were both included in the ultimate component, indicating that the variation in ultimate strain and postyield work could be largely explained by Raman-derived compositional parameters.

Economics-driven software architecture

CERN Document Server

Mistrik, Ivan; Kazman, Rick; Zhang, Yuanyuan

2014-01-01

Economics-driven Software Architecture presents a guide for engineers and architects who need to understand the economic impact of architecture design decisions: the long term and strategic viability, cost-effectiveness, and sustainability of applications and systems. Economics-driven software development can increase quality, productivity, and profitability, but comprehensive knowledge is needed to understand the architectural challenges involved in dealing with the development of large, architecturally challenging systems in an economic way. This book covers how to apply economic consider

Technical and Vocational Education and Training for Economic Growth in Pakistan

Directory of Open Access Journals (Sweden)

Shirin Nooruddin

2017-06-01

Full Text Available This discussion paper aims to highlight the existing scenario of Technical and Vocational Education and Training (TVET for the economic growth in Pakistan. It specifically analysis the status of vocational training, related policies and practices with reference to the 18th Amendment, which abolishes the concurrent list and grants more provincial autonomy in the matters of education. Article 25A of the Constitution of the Islamic Republic of Pakistan (iv states that the provinces should set priorities for access and quality education based on the provincial needs and develop action plans for its actualization. A developing country like Pakistan needs to devise a systematic, well thought and sophisticated policy for TVET; therefore, this paper proposes a policy following the simple framework of input, process and output. The inputs are predominantly focused on highlighting and matching demand and supply of the TVET. The process thoroughly discusses both the formal and informal education arrangements. Finally, the outputs are deliberated in the form of economic effects such as the manpower structures, technological development, manpower quality and economic behavior leading to the ultimate goal of economic growth and development of the country.

The cost of LLW disposal - Is it sound economics?

International Nuclear Information System (INIS)

Stelluto, Janis D.

1992-01-01

Low-level radioactive waste (LLW) management is a growth industry. Since 1980, when the LLW Policy Act was passed, regional and state LLW bureaucracies have grown, and LLW services and consulting businesses have prospered. Most states and federal agencies have LLW programs with increased regulation of LLW management. Costs of all these programs have soared as facilities for LLW disposal are proposed in sixteen, or more, locations in the country. LLW management costs have also increased as licensees implement comprehensive programs for volume reduction and waste form stabilization. Yet, the total cost of LLW management service is borne by nearly the same universe of payers as in 1980: taxpayers and radioactive materials licensees. Those costs are, in turn, passed on through taxes and consumer costs. Ultimately, everybody pays. Despite this investment, the LLW situation is adrift. New facilities have not been built, and existing facilities are closing or limiting access. LLW management has not advanced to a respected field of engineering and science. Nor does it include exceptional benefit and opportunity to host communities. A new focus is needed to allow an economically sound solution to emerge, one where the supply of LLW management and disposal fits the demand for service. (author)

Ultimate pressure capacity assessment of R FRC PCCV based on the tension stiffening tests

International Nuclear Information System (INIS)

Hahm, Dae Gi; Choun, Young Sun

2012-01-01

The use of fibers in concrete or cement composites can enhance the performance of structural elements. Fibers have been used for a cement mixture to increase the toughness and tensile strength, and to improve the cracking and deformation characteristics. The addition of fibers into concrete can improve the ductility and increase the tensile resistance of concrete structures. Recently, the application of fibers to prestressed concrete containment vessels (PCCVs) has been a major research topic. However, the tensile stiffening behavior of reinforced - fiber reinforced concrete (RFRC) is not fully developed yet especially for specimens using large diameter re bars. In nuclear power plant (NPP) PCCVs, large diameter re bars are applied. Therefore, the tensile stiffening behavior model should be developed to assess ultimate pressure capacity (UPC) of R FRC PCCVs. In this study, we modeled the tensile stiffening behavior of R FRC PCCVs by using recently developed model, and assessed the UPC of R FRC PCCVs. To do this, we performed tension stiffening test of R FRC with large diameter re bar

Ultimate pressure capacity assessment of R FRC PCCV based on the tension stiffening tests

Energy Technology Data Exchange (ETDEWEB)

Hahm, Dae Gi; Choun, Young Sun [KAERI, Daejeon (Korea, Republic of)

2012-10-15

The use of fibers in concrete or cement composites can enhance the performance of structural elements. Fibers have been used for a cement mixture to increase the toughness and tensile strength, and to improve the cracking and deformation characteristics. The addition of fibers into concrete can improve the ductility and increase the tensile resistance of concrete structures. Recently, the application of fibers to prestressed concrete containment vessels (PCCVs) has been a major research topic. However, the tensile stiffening behavior of reinforced - fiber reinforced concrete (RFRC) is not fully developed yet especially for specimens using large diameter re bars. In nuclear power plant (NPP) PCCVs, large diameter re bars are applied. Therefore, the tensile stiffening behavior model should be developed to assess ultimate pressure capacity (UPC) of R FRC PCCVs. In this study, we modeled the tensile stiffening behavior of R FRC PCCVs by using recently developed model, and assessed the UPC of R FRC PCCVs. To do this, we performed tension stiffening test of R FRC with large diameter re bar.

Nicotine reduction as an increase in the unit price of cigarettes: a behavioral economics approach.

Science.gov (United States)

Smith, Tracy T; Sved, Alan F; Hatsukami, Dorothy K; Donny, Eric C

2014-11-01

Urgent action is needed to reduce the harm caused by smoking. Product standards that reduce the addictiveness of cigarettes are now possible both in the U.S. and in countries party to the Framework Convention on Tobacco Control. Specifically, standards that required substantially reduced nicotine content in cigarettes could enable cessation in smokers and prevent future smoking among current non-smokers. Behavioral economics uses principles from the field of microeconomics to characterize how consumption of a reinforcer changes as a function of the unit price of that reinforcer (unit price=cost/reinforcer magnitude). A nicotine reduction policy might be considered an increase in the unit price of nicotine because smokers are paying more per unit of nicotine. This perspective allows principles from behavioral economics to be applied to nicotine reduction research questions, including how nicotine consumption, smoking behavior, use of other tobacco products, and use of other drugs of abuse are likely to be affected. This paper reviews the utility of this approach and evaluates the notion that a reduction in nicotine content is equivalent to a reduction in the reinforcement value of smoking-an assumption made by the unit price approach. Copyright © 2014 Elsevier Inc. All rights reserved.

"Economics Imperialism", Education Policy and Educational Theory

Science.gov (United States)

Allais, Stephanie

2012-01-01

This paper examines how economics imperialism (the increasing colonization of other disciplines by neoclassical economics) has affected contemporary education policies. I suggest that an increasing preoccupation with education meeting the needs of the economy, together with the prevalence of economic concepts outside of economics, have contributed…

The Impact of the Economic Transition on the Development of Economic Freedom – Case of Poland

Directory of Open Access Journals (Sweden)

Anna Stepniak-Kucharska

2015-06-01

Full Text Available The changes in the Polish socio-economic system, initiated at the turn of 1989 and 1990, led to a systematic increase in the liberalization of economy and thereby the rise of the level of economic freedom. The aim of this paper is to examine the impact of the economic transition on the development of economic freedom in Poland. The analysis, carried out in the period 1995-2015, was conducted on the basis of the chain-linked Economic Freedom Index by the Fraser Institute and the Index of Economic Freedom of the Heritage Foundation and the Wall Street Journal. The analysis indicates that: (1 Poland cannot be considered as a country that is fully free economically, but the transition of its economic system has resulted in a rapid growth of economic freedom. (2 The impact of transition varies for different areas (sub-indices of the economy. (3 The European economic integration stimulated the increase of EFI, but the economic crisis did not decrease the level of economic freedom.

The prospects of transition metal dichalcogenides for ultimately scaled CMOS

Science.gov (United States)

Thiele, S.; Kinberger, W.; Granzner, R.; Fiori, G.; Schwierz, F.

2018-05-01

MOSFET gate length scaling has been a main source of progress in digital electronics for decades. Today, researchers still spend considerable efforts on reducing the gate length and on developing ultimately scaled MOSFETs, thereby exploring both new device architectures and alternative channel materials beyond Silicon such as two-dimensional TMDs (transition metal dichalcogenide). On the other hand, the envisaged scaling scenario for the next 15 years has undergone a significant change recently. While the 2013 ITRS edition required a continuation of aggressive gate length scaling for at least another 15 years, the 2015 edition of the ITRS suggests a deceleration and eventually a levelling off of gate length scaling and puts more emphasis on alternative options such as pitch scaling to keep Moore's Law alive. In the present paper, future CMOS scaling is discussed in the light of emerging two-dimensional MOSFET channel, in particular two-dimensional TMDs. To this end, the scaling scenarios of the 2013 and 2015 ITRS editions are considered and the scaling potential of TMD MOSFETs is investigated by means of quantum-mechanical device simulations. It is shown that for ultimately scaled MOSFETs as required in the 2013 ITRS, the heavy carrier effective masses of the Mo- and W-based TMDs are beneficial for the suppression of direct source-drain tunneling, while to meet the significantly relaxed scaling targets of the 2016 ITRS heavy-effective-mass channels are not needed.

Future Synchrotron Light Sources Based on Ultimate Storage Rings

International Nuclear Information System (INIS)

Cai, Yunhai

2012-01-01

The main purpose of this talk is to describe how far one might push the state of the art in storage ring design. The talk will start with an overview of the latest developments and advances in the design of synchrotron light sources based on the concept of an 'ultimate' storage ring. The review will establish how bright a ring based light source might be, where the frontier of technological challenges are, and what the limits of accelerator physics are. Emphasis will be given to possible improvements in accelerator design and developments in technology toward the goal of achieving an ultimate storage ring. An ultimate storage ring (USR), defined as an electron ring-based light source having an emittance in both transverse planes at the diffraction limit for the range of X-ray wavelengths of interest for a scientific community, would provide very high brightness photons having high transverse coherence that would extend the capabilities of X-ray imaging and probe techniques beyond today's performance. It would be a cost-effective, high-coherence 4th generation light source, competitive with one based on energy recovery linac (ERL) technology, serving a large number of users studying material, chemical, and biological sciences. Furthermore, because of the experience accumulated over many decades of ring operation, it would have the great advantage of stability and reliability. In this paper we consider the design of an USR having 10-pm-rad emittance. It is a tremendous challenge to design a storage ring having such an extremely low emittance, a factor of 100 smaller than those in existing light sources, especially such that it has adequate dynamic aperture and beam lifetime. In many ultra-low emittance designs, the injection acceptances are not large enough for accumulation of the electron beam, necessitating on-axis injection where stored electron bunches are completely replaced with newly injected ones. Recently, starting with the MAX-IV 7-bend achromatic cell, we

Future Synchrotron Light Sources Based on Ultimate Storage Rings

Energy Technology Data Exchange (ETDEWEB)

Cai, Yunhai; /SLAC

2012-04-09

The main purpose of this talk is to describe how far one might push the state of the art in storage ring design. The talk will start with an overview of the latest developments and advances in the design of synchrotron light sources based on the concept of an 'ultimate' storage ring. The review will establish how bright a ring based light source might be, where the frontier of technological challenges are, and what the limits of accelerator physics are. Emphasis will be given to possible improvements in accelerator design and developments in technology toward the goal of achieving an ultimate storage ring. An ultimate storage ring (USR), defined as an electron ring-based light source having an emittance in both transverse planes at the diffraction limit for the range of X-ray wavelengths of interest for a scientific community, would provide very high brightness photons having high transverse coherence that would extend the capabilities of X-ray imaging and probe techniques beyond today's performance. It would be a cost-effective, high-coherence 4th generation light source, competitive with one based on energy recovery linac (ERL) technology, serving a large number of users studying material, chemical, and biological sciences. Furthermore, because of the experience accumulated over many decades of ring operation, it would have the great advantage of stability and reliability. In this paper we consider the design of an USR having 10-pm-rad emittance. It is a tremendous challenge to design a storage ring having such an extremely low emittance, a factor of 100 smaller than those in existing light sources, especially such that it has adequate dynamic aperture and beam lifetime. In many ultra-low emittance designs, the injection acceptances are not large enough for accumulation of the electron beam, necessitating on-axis injection where stored electron bunches are completely replaced with newly injected ones. Recently, starting with the MAX-IV 7-bend

Collaborative innovation as a tool for environmental, economic and social sustainability in regional governance

DEFF Research Database (Denmark)

Torfing, Jacob; Hofstad, Hege

2015-01-01

solutions to common problems. The paper analyses the efforts of Norwegian regions to enhance collaborative innovation through the formation of interactive governance arenas. It compares three different policy areas in order to better understand how different forms of interactive governance enhance...... collaborative innovation for economic, social and environmental sustainability. The ultimate goal is to assess the ability and potential of Norwegian regions to solve wicked and unruly problems through collaborative innovation.......In the Scandinavian countries, the regional level of governance is neither the locus of large-scale policy reforms nor a significant provider of welfare to citizens. Nevertheless, it has some important policy tasks in the area of environmental, economic, and social sustainability. These policy...

Economic Modelling in Institutional Economic Theory

Directory of Open Access Journals (Sweden)

Wadim Strielkowski

2017-06-01

Full Text Available Our paper is centered around the formation of theory of institutional modelling that includes principles and ideas reflecting the laws of societal development within the framework of institutional economic theory. We scrutinize and discuss the scientific principles of this institutional modelling that are increasingly postulated by the classics of institutional theory and find their way into the basics of the institutional economics. We propose scientific ideas concerning the new innovative approaches to institutional modelling. These ideas have been devised and developed on the basis of the results of our own original design, as well as on the formalisation and measurements of economic institutions, their functioning and evolution. Moreover, we consider the applied aspects of the institutional theory of modelling and employ them in our research for formalizing our results and maximising the practical outcome of our paper. Our results and findings might be useful for the researchers and stakeholders searching for the systematic and comprehensive description of institutional level modelling, the principles involved in this process and the main provisions of the institutional theory of economic modelling.

Coniferous tree plantations in forest conditions-economic analysis of dedicated and semi-dedicated pathways to increase wood production

International Nuclear Information System (INIS)

Rakotoarison, Hanitra; Richter, Claudine; Cailly, Priscilla; Deleuze, Christine; Berthelot, Alain

2015-01-01

To meet growing demand for wood, particularly softwoods, the authors study a number of new silvicultural pathways for planting 3 species: Douglas fir, spruce and maritime pine. The goal of these pathways is to achieve specialised production of either industrial and workable timber, or a mixture of industrial and workable timber with medium-diameter workable timber. Pathways of this type have already been standardised for hardwoods, generally on fertile farmland. In a less fertile forest context, softwoods have a significant potential for woody production but specialized pathways and their profitability have yet to be studied. This article describes the innovative work being done to construct and simulate profitable production, new potential pathways, where plantation density, rotation time, the level of fertility are made to vary using the data from the FCBA test network in conjunction with the FCBA growth models (Oasis for spruce and Douglas fir, Sylveco for maritime pine). Economic data is derived from auction sales statistics and the ONF management and forestry work costs for the period 2012-2015. The Economics module developed by FCBA and ONF on the Capsis platform in the framework of the ICI project (Futurol) was used for the economic simulations. The analyses show that compared to conventional pathways, these pathways generally increase productivity but are nonetheless less profitable than current economic assumptions, although results vary according to species, fertility and the particular pathway. The sensitivity study shows that variations in the price of wood could alter the performance ratings as between conventional and specialised pathways. (authors)

Casual relationship between gross domestic saving and economic ...

African Journals Online (AJOL)

The empirical study confirmed that a significant relationship between domestic savings and ... and, which ultimately increases the country domestic saving level. ... which increase saving and investment into the country due to its dual effect. ... South Africa (96); South Sudan (1); Sudan (3); Swaziland (3); Tanzania (19); Togo ...

Ultimate strength performance of tankers associated with industry corrosion addition practices

Directory of Open Access Journals (Sweden)

Kim Do Kyun

2014-09-01

Full Text Available In the ship and offshore structure design, age-related problems such as corrosion damage, local denting, and fatigue damage are important factors to be considered in building a reliable structure as they have a significant influence on the residual structural capacity. In shipping, corrosion addition methods are widely adopted in structural design to prevent structural capacity degradation. The present study focuses on the historical trend of corrosion addition rules for ship structural design and investigates their effects on the ultimate strength performance such as hull girder and stiffened panel of double hull oil tankers. Three types of rules based on corrosion addition models, namely historic corrosion rules (pre-CSR, Common Structural Rules (CSR, and harmonised Common Structural Rules (CSRH are considered and compared with two other corrosion models namely UGS model, suggested by the Union of Greek Shipowners (UGS, and Time-Dependent Corrosion Wastage Model (TDCWM. To identify the general trend in the effects of corrosion damage on the ultimate longitudinal strength performance, the corrosion addition rules are applied to four representative sizes of double hull oil tankers namely Panamax, Aframax, Suezmax, and VLCC. The results are helpful in understanding the trend of corrosion additions for tanker structures

Ultimate strength performance of tankers associated with industry corrosion addition practices

Directory of Open Access Journals (Sweden)

Do Kyun Kim

2014-09-01

Full Text Available In the ship and offshore structure design, age-related problems such as corrosion damage, local denting, and fatigue damage are important factors to be considered in building a reliable structure as they have a significant influence on the residual structural capacity. In shipping, corrosion addition methods are widely adopted in structural design to prevent structural capacity degradation. The present study focuses on the historical trend of corrosion addition rules for ship structural design and investigates their effects on the ultimate strength performance such as hull girder and stiffened panel of double hull oil tankers. Three types of rules based on corrosion addition models, namely historic corrosion rules (pre-CSR, Common Structural Rules (CSR, and harmonised Common Structural Rules (CSRH are considered and compared with two other corrosion models namely UGS model, suggested by the Union of Greek Shipowners (UGS, and Time-Dependent Corrosion Wastage Model (TDCWM. To identify the general trend in the effects of corrosion damage on the ultimate longitudinal strength performance, the corrosion addition rules are applied to four representative sizes of double hull oil tankers namely Panamax, Aframax, Suezmax, and VLCC. The results are helpful in understanding the trend of corrosion additions for tanker structures.

Behaviour of concrete nuclear containment structures upto ultimate failure with special reference to MAPP-1 containment

International Nuclear Information System (INIS)

Appa Rao, T.V.S.R.

1975-01-01

Theoretical and experimental methods for investigating the behaviour of concrete secondary containment structures subjected to loads upto their ultimate failure have been discussed in the paper. Need for inelastic nonlinear analysis of containments has been emphasized. Different contitutive models of concrete that can be employed in the nonlinear analysis of concrete structures were briefly reviewed. Based on the experimental results obtained in a 1:12 scale model test conducted at the Structural Engineering Research (Regional) Centre, Madras, behaviour of the MAPP-1 containment to internal pressure loading upto its ultimate failure has been discussed. (author)

An Experimental Investigation on the Ultimate Strength of Partially Infilled: Braced Steel Frames

Science.gov (United States)

Dubey, Shailendra Kumar Damodar; Kute, Sunil Y.

2017-12-01

Infilled walls are usually, considered as non-structural elements. However, these walls are effective in carrying lateral loads. In this regard, an experimental investigation was planned and conducted to study the effect of braced and partially infilled steel frames with cement mortar and concrete in comparison to the bare frames. All these frames were tested up to collapse and subjected only to horizontal loads to obtain an effective and possible solution for soft storey which are generally not infilled. In comparison to bare steel frames, partially infilled frames have an increase of lateral load capacity by 45-60%. Central bracing is more effective than that of the corner bracing. For the same load partially infilled frames have significantly less deflection than that of the bare frames. A reduced load factor is suggested for the design of soft storey columns with the partial infills. A mathematical model has been proposed to calculate the theoretical ultimate load for the braced, cement mortar and concrete partial infilled frames.

Technology in the Aid of Delivering Economic Content to Teachers: Virtual Economics v. 3

Directory of Open Access Journals (Sweden)

John R. Swinton

2012-01-01

Full Text Available We examine the impact on student achievement of a face-to-face teacher workshop that also provides economics instructors with access to an electronic library of instructional and reference material for their economics classroom—Virtual Economics v. 3 (VE3, offered by the Council for Economic Education. Based on evidence using student and teacher-level administrative data from the Georgia Department of Education and controlling for students’ prior achievement in mathematics, we find evidence that the VE3 workshop experience increases student achievement in high school economics. Our difference-in-differences estimates suggest that teacher participation in the VE3 workshop increases student achievement by 0.061 standard deviations on Georgia’s high stakes economics end-of-course test. Future research should seek estimating the effect of treatments in education such as the VE3 workshop using randomized controlled trials (RCT.

Effects of Problem Based Economics on High School Economics Instruction

Science.gov (United States)

Finkelstein, Neal; Hanson, Thomas

2011-01-01

The primary purpose of this study is to assess student-level impacts of a problem-based instructional approach to high school economics. The curriculum approach examined here was designed to increase class participation and content knowledge for high school students who are learning economics. This study tests the effectiveness of Problem Based…

Development Strategies in Papua Economic Democracy

Directory of Open Access Journals (Sweden)

Muhamad Ismail

2015-09-01

Full Text Available Based economic development aims to increase community participation in various development activities, especially in the economic field. Populist both economic development by exploiting the potential of Micro Small Medium Enterprises has not made a significant impact to the welfare of society. The purpose of the study to see how far the populist economic development in Papua, and formulate a strategy based economic development in the province of Papua. Using SWOT the analysis, using primary and secondary data. The results showed populist economic development in Papua province could not be implemented to the fullest because it is affected by several drawbacks and other technical constraints such as shortage of working capital, equipment is still modest, the quality and quantity of the product is low, the difficulty of access to markets and weak entrepreneurial spirit, especially for community / indigenous people of Papua economic actors. Based economic development can be done by utilizing the role of micro and medium-sized businesses and cooperatives / KUD because people could easily be involved in both the economic container. Based economic development can be done by: Increasing the quality and quantity of local products to compete with regional and international markets, giving stimulant fund for venture capital for the economic actors of the people by utilizing funds OTSUS, and the state budget, Improved HR agriculture through private sector support (partners’ business and capital of banking institutions. To overcome the weaknesses in the development of community economy, it can be done through: Boosting qualities SDM economic actors people through non-formal education / training, education and ongoing training for facilitators, provision of venture capital and agricultural equipment by utilizing appropriate technology (TTG, increasing the role of Micro, Small and Medium Enterprises and co-operatives to all districts / cities, utilization of

Application of risk-informed design methods to select the PSACS ultimate heat sink

International Nuclear Information System (INIS)

Elliott, Michael A.; Apostolakis, George E.

2009-01-01

In the early phases of advanced system design, information is scarce. The technologies, components and processes to be used have not been specified adequately or are not well understood and uncertainties are very large. Yet, it is during these early phases that design teams and other stakeholders are required to make critical decisions to guide the development of the system. To aid in this decision making, a formal process is proposed based on the Analytic-Deliberative Decision-Making Process (ADP) that allows stakeholders to synthesize rationally their knowledge and experience and facilitate learning and sharing of best practices. The ADP identifies and prioritizes attributes relevant to a decision problem and supports the formulation of metrics to measure the performance of different design options. This paper reports on an application of the ADP to the selection of an ultimate heat sink for the Flexible Conversion Ratio (FCR) reactor's Passive Secondary Auxiliary Cooling System (PSACS). Two ultimate heat sink options are identified and evaluated, air and water.

Modelling management process of key drivers for economic sustainability in the modern conditions of economic development

Directory of Open Access Journals (Sweden)

Pishchulina E.S.

2017-01-01

Full Text Available The text is about issues concerning the management of driver for manufacturing enterprise economic sustainability and manufacturing enterprise sustainability assessment as the key aspect of the management of enterprise economic sustainability. The given issues become topical as new requirements for the methods of manufacturing enterprise management in the modern conditions of market economy occur. An economic sustainability model that is considered in the article is an integration of enterprise economic growth, economic balance of external and internal environment and economic sustainability. The method of assessment of economic sustainability of a manufacturing enterprise proposed in the study allows to reveal some weaknesses in the enterprise performance, and untapped reserves, which can be further used to improve the economic sustainability and efficiency of the enterprise. The management of manufacturing enterprise economic sustainability is one of the most important factors of business functioning and development in modern market economy. The relevance of this trend is increasing in accordance with the objective requirements of the growing volumes of production and sale, the increasing complexity of economic relations, changing external environment of an enterprise.

ULTimateCO2 - State of the art report. Dealing with uncertainty associated with long-term CO2 geological storage

International Nuclear Information System (INIS)

2014-01-01

ULTimateCO2, a four-year collaborative project financed by the 7. Framework Programme and coordinated by BRGM, aims to shed more light on the long-term processes associated with the geological storage of CO 2 . ULTimateCO2 unites 12 partners (research institutes, universities, industrialists) and a varied panel of experts (NGOs, national authority representatives, IEAGHG,...). Based on a multidisciplinary approach, and bringing together laboratory experiments, numerical modelling and natural analogue field studies, ULTimateCO2 will increase our understanding of the long-term effects of CO 2 Capture and Storage (CCS) in terms of hydrodynamics, geochemistry, mechanics of the storage formations and their vicinity. The report contains the partners' pooled knowledge and provides a view of the current state-of-the-art for the issues addressed by this project: - The long-term reservoir trapping efficiency (WP3); - The long-term sealing integrity of faulted and fractured cap-rock (WP4); - The near-well leakage characterisation and chemical processes (WP5); - The long-term behavior of stored CO 2 looking at the basin scale (WP2); - Uncertainty assessment (WP6). Each chapter is divided into two sections: (i) a summary which explains in 'simple words' the main issues and objectives of the WP, and (ii) a current state of the art section which provides a more sound review on the specific studied processes. The aim is to provide answers to pertinent questions from a variety of users, particularly project owners, site operators and national authorities, about their exposure to uncertainty downstream of closure of a CO 2 geological storage site

Management options to increase soil organic matter and nitrogen availability in cultivated drylands

International Nuclear Information System (INIS)

Grace, P.R.

1998-01-01

Cropping of dryland soils in marginal regions with an emphasis on economic rather than ecological sustainability has generally led to decline in soil organic matter reserves and hence nutrient availability. Outputs commonly exceed inputs, with degradation of soil structure, reduction in infiltration and increase in runoff. Biological productivity is severely affected, leading to a vicious cycle of events usually culminating in decreased N release, excessive soil loss and ultimately desertification. Reducing the incidence of bare fallow, increasing crop-residue retention, strategic N-fertilizer application and shifting to cereal-legume rotations (as opposed to monocultures) and intercropping can slow the spiral. Simulation models such as DSSAT and SOCRATES provide suitable and easy-to-use platforms to evaluate these management strategies in terms of soil organic matter accumulation and yield performance. Through the linkage of these models to global information systems and the use of spatial-characterization software to identify zones of similarity, it is now possible to examine the transportability and risk of a particular management strategy under a wide range of climatic and soil conditions. (author)

The ultimate safe (US) Reactor: A concept for the third millenium

International Nuclear Information System (INIS)

Gat, U.

1986-01-01

The Ultimate Safe (U.S.) Reactor is based on a novel safety concept. Fission products in the reactor are allowed to accumulate only to a level at which they would constitute a harmless source term. Removal of fission products also removes the decay heat - the driving force for the source term. The reactor has no excess criticality and is controlled by the reactivity temperature coefficient. Safety is inherent and passive. Waste is removed from the site promptly

Economic enterprise during economic dowturn

Directory of Open Access Journals (Sweden)

Eugeniusz Niedzielski

2015-12-01

The analysis showed, among others, that after a marked deterioration in the small and medium-sized enterprises sector in 2009 there was a gradual improvement of the financial situation and development of companies. Also, last year the level of optimism of entrepreneurs in the perception of the economic situation increased significantly.

Economic inequality and economic crisis: a challenge for social workers.

Science.gov (United States)

Goldberg, Gertrude Schaffner

2012-07-01

To social workers, extreme economic inequality is primarily a violation of social justice, but this article shows how growing economic inequality since the mid-1970s was not only unjust, but also dysfunctional to the U.S. economy and linked to the recent economic crisis with its devastating effects, particularly on the social work clientele. The article identifies interrelated changes in ideology, the market economy, and government policies since the mid-1970s; contrasts the political economy of this period with the preceding post-World War II decades when the trend was toward a "shared prosperity"; and shows how increased economic inequality and political consequences that undermined democracy itself contributed to the economic meltdown. The analysis has implications for the direction of social reform and for broadening the constituency of social movements in pursuit of the social work mission of social justice. How social workers can contribute to such movements and to a reduction of economic and political inequality is explored.

An analysis of China's coal supply and its impact on China's future economic growth

International Nuclear Information System (INIS)

Wang, Jianliang; Feng, Lianyong; Tverberg, Gail E.

2013-01-01

Many people believe that China's economic growth can continue almost indefinitely. For a manufacturing-based economy such as China's to continue to grow, it needs an adequate supply of inexpensive energy. To date, this energy growth has primarily come from coal, but China's indigenous coal supplies are now falling short of the amount needed to support this growth. In this situation, the status of China's future coal supply will be very important for China's future economic development. Our analysis shows that China's ultimate recoverable coal reserves equal 223.6×10 9 MT, and its production will peak between 2025 and 2030, with peak production of approximately 3.9×10 9 MT. The extent to which China can import coal in the future is uncertain. With rising coal demand, this combination is likely to create a significant challenge to China's future economic development. - Highlights: ► We analyze an issue of prime importance for the future of China's economy. ► The decline in coal supply will present a challenge to China's economic growth. ► Rising coal price will also have an adverse impact on economic growth

Connecting thermodynamics and economics: well-lit roads and burned bridges.

Science.gov (United States)

Glucina, Mark David; Mayumi, Kozo

2010-01-01

Almost 40 years have passed since Georgescu-Roegen's seminal work, The Entropy Law and the Economic Process. During this time there has been much debate on the relevance of thermodynamics to economics, and many attempts to build bridges between the two. There has also been much confusion as to what the laws of thermodynamics actually say. This article clearly explains heat, work, and the thermodynamic laws, the meaning of entropy, and the importance of kinetics as a barrier to thermodynamically favorable processes. The two most important misunderstandings in the literature, namely entropy as disorder, and entropy as a measure of information, are highlighted. Reviewing the literature shows that thermodynamics is most relevant for building a descriptive model, or preanalytic vision of economics, because it implies physical constraints on production and consumption. Similarly, it suggests that there may be serious flaws with neoclassical economic models, and in particular the primacy of sustained growth. However, thermodynamics does not seem to aid mathematical modeling in economics, nor does it provide normative insights. As an aid to energy policy, thermodynamics is useful for assessing the feasibility of technology options--those that have the potential to meet our goals, and should be counted as options, and those that should not. But it does not provide a prescription outside of this technical realm. Factors, such as environmental impact, cost, and social acceptability, will ultimately determine which technically feasible options are most desirable.

Ultimate Tensile Strength as a Function of Test Rate for Various Ceramic Matrix Composites at Elevated Temperatures

Science.gov (United States)

Choi, Sung R.; Bansal, Narottam P.; Gyekenyesi, John P.

2002-01-01

Ultimate tensile strength of five different continuous fiber-reinforced ceramic composites, including SiC/BSAS (2D 2 types), SiC/MAS-5 (2D), SiC/SiC (2D enhanced), and C/SiC(2D) was determined as a function of test rate at I 100 to 1200 'C in air. All five composite materials exhibited a significant dependency of ultimate strength on test rate such that the ultimate strength decreased with decreasing test rate, similar to the behavior observed in many advanced monolithic ceramics at elevated temperatures. The application of the preloading technique as well as the prediction of life from one loading configuration (constant stress rate) to another (constant stress loading) for SiC/BSAS suggested that the overall macroscopic failure mechanism of the composites would be the one governed by a power-law type of damage evolution/accumulation, analogous to slow crack growth commonly observed in advanced monolithic ceramics.

26 CFR 48.6427-10 - Kerosene; claims by registered ultimate vendors (blocked pumps).

Science.gov (United States)

2010-04-01

... (blocked pumps). 48.6427-10 Section 48.6427-10 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE...; claims by registered ultimate vendors (blocked pumps). (a) Overview. This section provides rules under... allowed by section 6427(l)(5)(B)(i). These claims relate to kerosene sold from a blocked pump. Claims...

Testing the economic independence hypothesis: the effect of an exogenous increase in child support on subsequent marriage and cohabitation.

Science.gov (United States)

Cancian, Maria; Meyer, Daniel R

2014-06-01

We examine the effects of an increase in income on the cohabitation and marriage of single mothers. Using data from an experiment that resulted in randomly assigned differences in child support receipt for welfare-receiving single mothers, we find that exogenous income increases (as a result of receiving all child support that was paid) are associated with significantly lower cohabitation rates between mothers and men who are not the fathers of their child(ren). Overall, these results support the hypothesis that additional income increases disadvantaged women's economic independence by reducing the need to be in the least stable type of partnerships. Our results also show the potential importance of distinguishing between biological and social fathers.

Qualtum cosmics-and-chaotics--the ultimate tortoise in physics and modern medicine.

Directory of Open Access Journals (Sweden)

Kothari M

1997-10-01

Full Text Available Qualtum cosmics is the qualitative opposite of quantum mechanics. The flip-side of qualtum cosmics is qualtum chaotics, the two governing much of what is seen as inscrutable in medicine. The Ultimate (Last Tortoise is close to Einsteinean idea of a Unified Theory, a single concept that can explain whatsoever there is in physics, (and in medicine, or what have you.

Design Dependent Cutoff Frequency of Nanotransistors Near the Ultimate Performance Limit

Science.gov (United States)

Kordrostami, Zoheir; Sheikhi, M. Hossein; Zarifkar, Abbas

2012-12-01

We have studied the effect of different structural designs of double gate MOSFETs (DG-MOSFETs) and carbon nanotube field effect transistors (CNTFETs) on the cutoff frequency (fT). The effects of metallic contacts with Schottky barriers, gate work function, dual material gate (DMG), halo doped channel and lightly doped drain and source (LDDS) architectures on the fT have been investigated for DG-MOSFETs and CNTFETs and the design dependent fT for both types of transistors has been studied for the first time. The simulations are based on the Schrödinger-Poisson solvers developed for each nanotransistor separately. The ballistic limit has been studied as the ultimate performance limit of the DG-MOSFETs and CNTFETs. The results of this paper, for the first time, show how some designations used for modification of short channel effects or current-voltage characteristics affect the fT. The results revealed that the cutoff frequencies of both types of the transistors exhibit the same behavior with changing design parameters. We have shown that the Schottky barriers, parasitic capacitances and halo doping reduce the fT and have proposed the DMG and LDDS artchitectures as ways to increase the fT for DG-MOSFETs and CNTFETs for the first time.

Intellectual property-A strong determinant of Economic Growth

Directory of Open Access Journals (Sweden)

Love k Singh

2009-12-01

Full Text Available

Americans misperceive racial economic equality.

Science.gov (United States)

Kraus, Michael W; Rucker, Julian M; Richeson, Jennifer A

2017-09-26

The present research documents the widespread misperception of race-based economic equality in the United States. Across four studies ( n = 1,377) sampling White and Black Americans from the top and bottom of the national income distribution, participants overestimated progress toward Black-White economic equality, largely driven by estimates of greater current equality than actually exists according to national statistics. Overestimates of current levels of racial economic equality, on average, outstripped reality by roughly 25% and were predicted by greater belief in a just world and social network racial diversity (among Black participants). Whereas high-income White respondents tended to overestimate racial economic equality in the past, Black respondents, on average, underestimated the degree of past racial economic equality. Two follow-up experiments further revealed that making societal racial discrimination salient increased the accuracy of Whites' estimates of Black-White economic equality, whereas encouraging Whites to anchor their estimates on their own circumstances increased their tendency to overestimate current racial economic equality. Overall, these findings suggest a profound misperception of and unfounded optimism regarding societal race-based economic equality-a misperception that is likely to have any number of important policy implications.

Economic Value Approach to Industrial Water Demand Management, A Case Study of Chemical Plants

Directory of Open Access Journals (Sweden)

morteza tahami pour zarandi

2017-03-01

Full Text Available Limitations in water supply to meet the increasing demand have encouraged both planners and researchers to focus attention on water demand management, in which such economic tools as the water pricing system play a major role. A fundamental component of the pricing system is the estimation of the economic value of water, which reflects a firm’s maximum affordable water price or the ultimate elasticity of industrial water. The present study was conducted to estimate the economic value of water for basic chemical plants, excluding fertilizers and nitrogen compounds (code 2411, representing the four-digit ISIC industrial codes which account for about 14% of the total industrial water consumption. The econometric method of production function within the framework of panel data and the residual method were used. Data were collected from the Census of medium-sized businesses carried out by the Statistical Center of Iran over the period 1997–2013.  Results showed that one cubic meter of water allocated to the plants surveyed creates a value of 3,7071 Rials, which shows a large gap with the current purchase price of 5685 Rials. Moreover, it was found that the present water prices account for only about 1.3 percent of the total production cost of basic chemicals, excluding fertilizers and nitrogen compounds. It may, thus, be concluded that it is reasonable to increase the present water tariffs and discriminate among the various manufacturing codes by differences in tariffs in order to achieve water demand management goals. Finally, the information emerging from the study may be exploited to improve the revenues earned by water authorities or to carry out feasibility studies of industrial water development projects.

Nonlinear finite element analysis of nuclear reinforced prestressed concrete containments up to ultimate load capacity

International Nuclear Information System (INIS)

Gupta, A.; Singh, R.K.; Kushwaha, H.S.; Mahajan, S.C.; Kakodkar, A.

1996-01-01

For safety evaluation of nuclear structures a finite element code ULCA (Ultimate Load Capacity Assessment) has been developed. Eight/nine noded isoparametric quadrilateral plate/shell element with reinforcement as a through thickness discrete but integral smeared layer of the element is presented to analyze reinforced and prestressed concrete structures. Various constitutive models such as crushing, cracking in tension, tension stiffening and rebar yielding are studied and effect of these parameters on the reserve strength of structures is brought out through a number of benchmark tests. A global model is used to analyze the prestressed concrete containment wall of a typical 220 MWe Pressurized Heavy Water Reactor (PHWR) up to its ultimate capacity. This demonstrates the adequacy of Indian PHWR containment design to withstand severe accident loads

Modeling The Economic And Health Impact Of Increasing Children's Physical Activity In The United States.

Science.gov (United States)

Lee, Bruce Y; Adam, Atif; Zenkov, Eli; Hertenstein, Daniel; Ferguson, Marie C; Wang, Peggy I; Wong, Michelle S; Wedlock, Patrick; Nyathi, Sindiso; Gittelsohn, Joel; Falah-Fini, Saeideh; Bartsch, Sarah M; Cheskin, Lawrence J; Brown, Shawn T

2017-05-01

Increasing physical activity among children is a potentially important public health intervention. Quantifying the economic and health effects of the intervention would help decision makers understand its impact and priority. Using a computational simulation model that we developed to represent all US children ages 8-11 years, we estimated that maintaining the current physical activity levels (only 31.9 percent of children get twenty-five minutes of high-calorie-burning physical activity three times a week) would result each year in a net present value of $1.1 trillion in direct medical costs and $1.7 trillion in lost productivity over the course of their lifetimes. If 50 percent of children would exercise, the number of obese and overweight youth would decrease by 4.18 percent, averting $8.1 billion in direct medical costs and $13.8 billion in lost productivity. Increasing the proportion of children who exercised to 75 percent would avert $16.6 billion and $23.6 billion, respectively. Project HOPE—The People-to-People Health Foundation, Inc.

THE RELEVANCE OF ECONOMIC INFORMATION IN ANALYZING THE ECONOMIC PERFORMANCE

Directory of Open Access Journals (Sweden)

PATRUTA MIRCEA IOAN

2017-12-01

Full Text Available The performance analysis is based on an informational system, which provides financial information in various formatsand with various applicabilities.We intend to formulate a set of important caracteristics of financial information along with identifying a set of relevant financial rates and indicatorsused to appreciate the performance level of a company. Economic performance can be interpreted in different ways at each level of analysis. Generally, it refers to economic growth, increased productivity and profitability. The growth of labor productivity or increased production per worker is a measure of efficient use of resources in value creation.

Skills Management: A Base for Increasing Economic Competitiveness in Romania

Directory of Open Access Journals (Sweden)

Viorica CHIŞU

2012-06-01

Full Text Available The study incorporates an analysis of the performance of higher education system (the Bologna Model from the perspective of evaluations made by companies. The main objective is to identify the competence areas required from fresh graduates for sustaining the contention of business enterprises and to analyse investments made by companies for developing talents within the framework of pressure generated by the economic crisis. The study take into consideration the partnership between the economic environment and higher education institutions as well as an anticipation of occupation trends for young graduates based on employee forecasts. Research results demonstrate the fact that the education system relies mainly on a transfer of knowledge and not on developing the competencies necessary for enhancing the employment chances of graduates or on their job performance. Only two out of ten employers are satisfied by the competencies demonstrated by graduates, the statistics being similar to the number of employers who collaborate with higher education institutions for providing adequate study programmes. From amongst the companies declaring that they provide continual development programmes, most invest in courses related to communication, team work and client orientation, although they are not satisfied with the graduates’ abilities in solving problems, making decisions or in leadership. A weak collaboration between companies and educational institutions generates a lack of rapid response from the educational system to the requirements of the market economy, amplifying the deficiency of competences, especially in fields with continual technological development or in those where new occupations are constantly appearing.

ONE FINANCIAL REPORTING GLOBAL LANGUAGE: THE ULTIMATE GOAL?

Directory of Open Access Journals (Sweden)

Amelia Limijaya

2017-05-01

Full Text Available This article aims to analyse the extent to which international accounting standards is applied and whether it is the ultimate goal. Up until the end of 2016, approximately there are 84% of the 149 jurisdictions analysed which require IFRS for all or most domestic publicly accountable entities. This may indicate that we are not that much further from having a single set of globally-accepted accounting standards. However, there is more to financial reporting than just accounting standards alone, such as the political aspect of accounting standard-setting, translation issues surrounding IFRS adoption, the US position and the complexity of financial reporting. Improving financial reporting quality needs more than just having global accounting standards, rather, it is also essential to consider the preparers’ incentives and other institutions surrounding the firm. Stakeholders need to broaden the perspective when viewing financial reporting, so that it will not be focused merely on accounting standards alone.

ECONOMIC GROWTH THEORIES, CONCEPTUAL ELEMENTS, CHARACTERISTICS

Directory of Open Access Journals (Sweden)

Florina, POPA

2014-11-01

Full Text Available The approach of economic growth involves understanding the concept and growth factors, respectively, analysing the growth theories, their trend in the context of the development of economic and social life. The economic growth signifies a process aimed at increasing activities in the national economy, expressed by macroeconomic indicators, respectively, the dynamics of the overall Gross Domestic Product or per inhabitant. It can appreciate that, in the short term, this process signifies phases of economic prosperity and on the long-term, expresses an upward trend, a consequence of the succession of increases and decreases. The study presents some elements which outlines the concept of economic growth, that is, definitions, meanings and the main characteristics of the theories of growth, as well as some of its determinant factors. Also, it gives a brief overview of the main theories of economic growth, as they have evolved over time, in line with the economic reality dynamics and the development of the instruments of economic analysis, starting from the classical theories to the new theories and models of economic growth of the modern age.

Economic Values and Resource Use

Directory of Open Access Journals (Sweden)

Jan Mikael Malmaeus

2016-05-01

Full Text Available Absolute decoupling of GDP growth from resource use implies that economic output can be increased without simultaneously increasing input. The essential meaning of this proposition is that the economic values that represent the GDP can be realized by increasing resource efficiency. Given that the GDP is first and foremost a measure of economic activity rather than welfare the possibility of absolute decoupling is theoretically limited. This paper demonstrates theoretically and empirically that economic values at the macroeconomic level are fundamentally determined by the use of production factors, primarily labor and physical capital. Technical innovations or efficiency gains increasing utility without raising the costs of production do not add to the GDP unless they stimulate investments in physical capital. Hence the neoclassical notion of productivity is only found to be relevant as a microeconomic concept. In practice, GDP growth is mostly explained by capital accumulation and a key question is whether or not capital accumulation can be decoupled from the use of materials and energy. This will determine the possibility of decoupling of GDP growth from resource use and environmental impact. Alternative measures of progress focusing on welfare rather than economic activity are more likely to achieve absolute decoupling.

La simplexité, ultime avatar de la complexité ?

OpenAIRE

Demongeot, Jacques; Amor, Hedi Ben; Hazgui, Hana; Lontos, Athanasios

2014-01-01

1. Introduction La simplexité peut être considérée comme l’émergence de nouvelles fonctionnalités, issues des interactions entre sous-systèmes (ou modules) d’un système complexe : elle apparaît ainsi comme l’ultime avatar de la complexité, ce qui permet de la définir, sans rupture épistémologique avec le courant scientifique des systèmes complexes, comme la tendance qu’a la nature de sélectionner les fonctions vitales des êtres vivants, en particulier celles les plus utiles à la spécificité e...

Socio-economic impact of antiretroviral treatment in HIV patients. An economic review of cost savings after introduction of HAART.

Science.gov (United States)

Gonzalo, Teresa; García Goñi, Manuel; Muñoz-Fernández, María Angeles

2009-01-01

Star celebrities such as Rock Hudson, Freddie Mercury, Magic Johnson, and Isaac Asimov have unfortunately something in common: they were all victims of the HIV global pandemic. Since then HIV infection has become considered a pandemic disease, and it is regarded as a priority in healthcare worldwide. It is ranked as the first cause of death among young people in industrialized countries, and it is recognized as a public healthcare problem due to its human, social, mass media, and economic impact. Incorporation of new and highly active antiretroviral treatment, available since 1996 for HIV/AIDS treatment, has provoked a radical change in the disease pattern, as well as in the impact on patient survival and quality of life. The pharmaceutical industry's contribution, based on the research for more active new drugs, has been pivotal. Mortality rates have decreased significantly in 20 years by 50% and now AIDS is considered a chronic and controlled disease. In this review we have studied the impact of HAART treatment on infected patients, allowing them to maintain their status as active workers and the decreased absenteeism from work derived from this, contributing ultimately to overall social wealth and, thus, to economic growth. Furthermore, an analysis of the impact on healthcare costs, quality of life per year, life per year gained, cost economic savings and cost opportunity among other parameters has shown that society and governments are gaining major benefits from the inclusion of antiretroviral therapies in HIV/AIDS patients.

The theoretical ultimate magnetoelectric coefficients of magnetoelectric composites by optimization design

International Nuclear Information System (INIS)

Wang, H.-L.; Liu, B.

2014-01-01

This paper investigates what is the largest magnetoelectric (ME) coefficient of ME composites, and how to realize it. From the standpoint of energy conservation, a theoretical analysis is carried out on an imaginary lever structure consisting of a magnetostrictive phase, a piezoelectric phase, and a rigid lever. This structure is a generalization of various composite layouts for optimization on ME effect. The predicted theoretical ultimate ME coefficient plays a similar role as the efficiency of ideal heat engine in thermodynamics, and is used to evaluate the existing typical ME layouts, such as the parallel sandwiched layout and the serial layout. These two typical layouts exhibit ME coefficient much lower than the theoretical largest values, because in the general analysis the stress amplification ratio and the volume ratio can be optimized independently and freely, but in typical layouts they are dependent or fixed. To overcome this shortcoming and achieve the theoretical largest ME coefficient, a new design is presented. In addition, it is found that the most commonly used electric field ME coefficient can be designed to be infinitely large. We doubt the validity of this coefficient as a reasonable ME effect index and consider three more ME coefficients, namely the electric charge ME coefficient, the voltage ME coefficient, and the static electric energy ME coefficient. We note that the theoretical ultimate value of the static electric energy ME coefficient is finite and might be a more proper measure of ME effect

Dose-dependent effects of an immune challenge at both ultimate and proximate levels in Drosophila melanogaster.

Science.gov (United States)

Nystrand, M; Dowling, D K

2014-05-01

Immune responses are highly dynamic. The magnitude and efficiency of an immune response to a pathogen can change markedly across individuals, and such changes may be influenced by variance in a range of intrinsic (e.g. age, genotype, sex) and external (e.g. abiotic stress, pathogen identity, strain) factors. Life history theory predicts that up-regulation of the immune system will come at a physiological cost, and studies have confirmed that increased investment in immunity can reduce reproductive output and survival. Furthermore, males and females often have divergent reproductive strategies, and this might drive the evolution of sex-specific life history trade-offs involving immunity, and sexual dimorphism in immune responses per se. Here, we employ an experiment design to elucidate dose-dependent and sex-specific responses to exposure to a nonpathogenic immune elicitor at two scales--the 'ultimate' life history and the underlying 'proximate' immune level in Drosophila melanogaster. We found dose-dependent effects of immune challenges on both male and female components of reproductive success, but not on survival, as well as a response in antimicrobial activity. These results indicate that even in the absence of the direct pathogenic effects that are associated with actual disease, individual life histories respond to a perceived immune challenge--but with the magnitude of this response being contingent on the initial dose of exposure. Furthermore, the results indicate that immune responses at the ultimate life history level may indeed reflect underlying processes that occur at the proximate level. © 2014 The Authors. Journal of Evolutionary Biology © 2014 European Society For Evolutionary Biology.

Stochasticity in economic losses increases the value of reputation in indirect reciprocity.

Science.gov (United States)

dos Santos, Miguel; Placì, Sarah; Wedekind, Claus

2015-12-14

Recent theory predicts harsh and stochastic conditions to generally promote the evolution of cooperation. Here, we test experimentally whether stochasticity in economic losses also affects the value of reputation in indirect reciprocity, a type of cooperation that is very typical for humans. We used a repeated helping game with observers. One subject (the "Unlucky") lost some money, another one (the "Passer-by") could reduce this loss by accepting a cost to herself, thereby building up a reputation that could be used by others in later interactions. The losses were either stable or stochastic, but the average loss over time and the average efficiency gains of helping were kept constant in both treatments. We found that players with a reputation of being generous were generally more likely to receive help by others, such that investing into a good reputation generated long-term benefits that compensated for the immediate costs of helping. Helping frequencies were similar in both treatments, but players with a reputation to be selfish lost more resources under stochastic conditions. Hence, returns on investment were steeper when losses varied than when they did not. We conclude that this type of stochasticity increases the value of reputation in indirect reciprocity.

The costs and consequences of assisted reproductive technology: an economic perspective.

Science.gov (United States)

Connolly, Mark P; Hoorens, Stijn; Chambers, Georgina M

2010-01-01

Despite the growing use of assisted reproductive technologies (ART) worldwide, there is only a limited understanding of the economics of ART to inform policy about effective, safe and equitable financing of ART treatment. A review was undertaken of key studies regarding the costs and consequences of ART treatment, specifically examining the direct and indirect costs of treatment, economic drivers of utilization and clinical practice and broader economic consequences of ART-conceived children. The direct costs of ART treatment vary substantially between countries, with the USA standing out as the most expensive. The direct costs generally reflect the costliness of the underlying healthcare system. If unsubsidized, direct costs represent a significant economic burden to patients. The level of affordability of ART treatment is an important driver of utilization, treatment choices, embryo transfer practices and ultimately multiple birth rates. The costs associated with caring for multiple-birth ART infants and their mothers are substantial, reflecting the underlying morbidity associated with such pregnancies. Investment analysis of ART treatment and ART-conceived children indicates that appropriate funding of ART services appears to represent sound fiscal policy. The complex interaction between the cost of ART treatment and how treatments are subsidized in different healthcare settings and for different patient groups has far-reaching consequences for ART utilization, clinical practice and infant outcomes. A greater understanding of the economics of ART is needed to inform policy decisions and to ensure the best possible outcomes from ART treatment.

Modeling and simulation of loss of the ultimate heat sink in a typical material testing reactor

International Nuclear Information System (INIS)

El-Khatib, Hisham; El-Morshedy, Salah El-Din; Higazy, Maher G.; El-Shazly, Karam

2013-01-01

Highlights: ► A thermal–hydraulic model has been developed to simulate loss of the ultimate heat sink in MTR. ► The model involves three coupled sub-models for core, heat exchanger and cooling tower. ► The model is validated against PARET for steady-state and verified by operation data for transients. ► The model is used to simulate the behavior of the reactor under a loss of the ultimate heat sink. ► The model results are analyzed and discussed. -- Abstract: A thermal–hydraulic model has been developed to simulate loss of the ultimate heat sink in a typical material testing reactor (MTR). The model involves three interactively coupled sub-models for reactor core, heat exchanger and cooling tower. The model is validated against PARET code for steady-state operation and verified by the reactor operation records for transients. Then, the model is used to simulate the thermal–hydraulic behavior of the reactor under a loss of the ultimate heat sink event. The simulation is performed for two operation regimes: regime I representing 11 MW power and three cooling tower cells operated, and regime II representing 22 MW power and six cooling tower cells operated. In regime I, the simulation is performed for 1, 2 and 3 cooling tower cells failed while in regime II, it is performed for 1, 2, 3, 4, 5 and 6 cooling tower cells failed. The simulation is performed under protected conditions where the safety action called power reduction is triggered by reactor protection system to decrease the reactor power by 20% when the coolant inlet temperature to the core reaches 43 °C and scram is triggered if the core inlet temperature reaches 44 °C. The model results are analyzed and discussed.

Ultimate pressures achieved in TiZrV sputter-coated vacuum chambers

CERN Document Server

Benvenuti, Cristoforo; Ruzinov, V

2001-01-01

Two metre long, cylindrical vacuum chambers of diameter ranging from 34 to 100 mm, coated with TiZrV getter films by sputtering, have been baked for about 24 h at temperatures from 120 to 250 degrees C. The ultimate pressures achieved after bakeout were found to correspond to the ratio of the pressure gauge degassing to the effective pumping speed provided by the chamber at the location of the gauge. The results covering a pressure range from 10/sup -11/ Torr down to 10 /sup -13/ Torr are presented and discussed. (6 refs).

Environmentally Sustainable Economic Growth

Directory of Open Access Journals (Sweden)

Stelian Brad

2016-05-01

Full Text Available Economic growth and sustainable development are important issues for social prosperity. Sustainable development strives for moderate and responsible use within the economic activity of the limited resources of our planet, whereas economic growth does not limit the resource exploitation and energy, being mainly focused on productivity increase. From this perspective, both conceptual and operational contradictions occur between the two pillars of prosperity. This paper looks to these contradictions and proposes some streams of intervention such as economic growth and environmental sustainability to operate in harmony. A structured framework for innovative problem solving is considered in this respect. Results of this research show that it is possible to induce smart measures in the economic system for directing businesses towards new paradigms where economic growth is possible without negative effects on environmental sustainability.

Economic development with limited supplies of family labor: Chinese peasant families in balancing demographic and economic requisites.

Science.gov (United States)

Chang, K S

1991-07-01

Family planning (FP) in rural China, particularly the ramifications of the 1-child policy, has profound implications and ramifications for family-centered social and economic life in addition to demographic control. Under a constitutionally endorsed policy of strict birth control, favorable economic opportunities coexisted with the problem of familial labor shortages. Recent reform policies have led to a more relaxed FP environment. The Chinese state is in a dilemma between the need to allow peasant's autonomy in determining the familial work situation and the population pressure on the limited cultivated land. The Chinese experience of rural reform is examined in terms of the complex relationship between population change and economic development which are influenced by the production and welfare activities of the peasant family. The theoretical argument is that a family reliant strategy of economic reform undercuts the effectiveness of population control programs. The ultimate solution lies with sustained industrialization with high labor absorption. National trends and the Dahe People's Commune/Township experience are analyzed. Discussion is focused on the dilemma of FP and family production, old and new evidence of family size and economic performance, welfare outcome of family size, the role of the state in altering the demographic balance sheet, and the strategic response of peasant families to bring families of old designs back and urban migration and proletarianization. It is concluded that there is growing understanding that the causal relationships between population growth and economic development do not clearly support universal population control. Human social organization, not the man/land ratio, shapes the consequences of population growth. The implications for the Malthusian vs. Marxian debate for developing countries are that the resources/population imbalance needs to consider more carefully the human organizational factors. Mao's notions that a

Study of ultimate heat sink to Angra-1,2 and 3 Nuclear Power Plants

International Nuclear Information System (INIS)

Moreira, R.M.; Pinto, A.M.F.

1985-03-01

This report presents the premises, results and conclusion of study done to ultimate heat sink of Angra 1,2 and 3 units, with base in postulated accidents that generate transient heat discharges to environment. It's explicitily presumed the eventuality of discharging heat water recirculation. (C.M.) [pt

PUBLIC EDUCATION AND ECONOMIC COMPETITIVENESS

Directory of Open Access Journals (Sweden)

Gabriel-Andrei Donici

2011-09-01

Full Text Available There is a certain connection between education and economic competitiveness. The relation between these two concepts is easy to intuit. On the medium and long term investments in education generate astrong increase in a country’s level of economic competitiveness. Through education the human capital is formed, and it affects all economic fields. Therefore we can observe that human capital has a decisive influence on the economic competitiveness of a country.

Financial history and financial economics

OpenAIRE

Turner, John D.

2014-01-01

This essay looks at the bidirectional relationship between financial history and financial economics. It begins by giving a brief history of financial economics by outlining the main topics of interest to financial economists. It then documents and explains the increasing influence of financial economics upon financial history, and warns of the dangers of applying financial economics unthinkingly to the study of financial history. The essay proceeds to highlight the many insights that financi...

Ultimate strength analysis of thin plated structures using eigen-functions. 3rd Report. Application to reliability analysis; Koyu kansu wo mochiita usuita kozobutsu no dansosei kaisekiho. 3. Shinraisei kaiseki eno oyo

Energy Technology Data Exchange (ETDEWEB)

Ueda, Y. [Osaka University, Osaka (Japan). Welding Research Institute; Masaoka, K.; Okada, H. [University of Osaka Prefecture, Osaka (Japan). Faculty of Engineering

1996-12-31

A reliability analysis was performed on ultimate strength of a hull by introducing reliability engineerings into the idealized structural unit method. Elements developed under the present study were applied to a model of an actual structure to indicate that even an analysis requiring much time under the finite element method can be performed in a short time and at high accuracy when this method is used. Analysis acted with bending moment and shear force simultaneously was performed on a model used as a structure in experiments carried out by Nishihara, assuming pure bending moment and longitudinal strength during slamming. Then, a reliability analysis was conducted on the same model based on this analysis method to investigate the ultimate strength. In an analysis of an ultimate strength when bending and shearing that assume slamming act upon simultaneously, axial force in the hull side decreases as loading increases, wherein how the shearing force increases can be identified clearly. Although existence of initial bends reduces the strength, the effect of variance in the vicinity of the average value on the reliability is rather small, while the effect due to variance in yield stress is greater. 27 refs., 14 figs., 4 tabs.

Ultimate strength analysis of thin plated structures using eigen-functions. 3rd Report. Application to reliability analysis; Koyu kansu wo mochiita usuita kozobutsu no dansosei kaisekiho. 3. Shinraisei kaiseki eno oyo

Energy Technology Data Exchange (ETDEWEB)

Ueda, Y [Osaka University, Osaka (Japan). Welding Research Institute; Masaoka, K; Okada, H [University of Osaka Prefecture, Osaka (Japan). Faculty of Engineering

1997-12-31

A reliability analysis was performed on ultimate strength of a hull by introducing reliability engineerings into the idealized structural unit method. Elements developed under the present study were applied to a model of an actual structure to indicate that even an analysis requiring much time under the finite element method can be performed in a short time and at high accuracy when this method is used. Analysis acted with bending moment and shear force simultaneously was performed on a model used as a structure in experiments carried out by Nishihara, assuming pure bending moment and longitudinal strength during slamming. Then, a reliability analysis was conducted on the same model based on this analysis method to investigate the ultimate strength. In an analysis of an ultimate strength when bending and shearing that assume slamming act upon simultaneously, axial force in the hull side decreases as loading increases, wherein how the shearing force increases can be identified clearly. Although existence of initial bends reduces the strength, the effect of variance in the vicinity of the average value on the reliability is rather small, while the effect due to variance in yield stress is greater. 27 refs., 14 figs., 4 tabs.

Monitoring and economic factors affecting the economic viability of afforestation for carbon sequestration projects

International Nuclear Information System (INIS)

Robertson, Kimberly; Loza-Balbuena, Isabel; Ford-Robertson, Justin

2004-01-01

The Kyoto Protocol is the first step towards achieving the objectives of the United Nations Framework Convention on Climate Change and aims among others to promote 'the protection and enhancement of carbon sinks and reservoirs'. To encourage afforestation for carbon sequestration a project must be economically viable. This study uses a model to analyse the impact on project viability of a range of carbon monitoring options, international carbon credit value and discount rate, applied to a Pinus radiata afforestation project in New Zealand. Monitoring carbon in conjunction with conventional forest inventory shows the highest return. Long-term average carbon accounting has lower accounting costs, compared to annual and 5 yearly accounting, as monitoring is only required every 5-10 years until the long-term average is attained. In this study we conclude that monitoring soil carbon stocks is not economically feasible using any of the accounting methods, when carbon is valued at US$ 10/t. This conclusion may be relevant to forest carbon sequestration projects elsewhere in the world and suggests care is needed in selecting the appropriate carbon monitoring options to avoid the risk that costs could be higher than any monetary benefits from terrestrial carbon sequestration. This would remove any commercial incentive to afforest for carbon sequestration reasons and severely limit the use of forest sinks as part of any package of measures addressing the ultimate objective of the UNFCCC

Ultimate Drivers and Proximate Correlates of Polyandry in Predatory Mites.

Directory of Open Access Journals (Sweden)

Peter Schausberger

Full Text Available Polyandry is more widespread than anticipated from Bateman's principle but its ultimate (evolutionary causes and proximate (mechanistic correlates are more difficult to pinpoint than those of polygyny. Here, we combined mating experiments, quantification of reproductive traits and microsatellite genotyping to determine the fitness implications of polyandry in two predatory mite species, where males are highly polygynous (up to 45 fertilized females during life, whereas females range from monandry to various polyandry levels. The medium-level polyandrous (up to eight male mates possible Neoseiulus californicus received clear direct and indirect benefits: multiply mated females produced more offspring with higher survival chances over longer times than singly mated females. In contrast, singly and multiply mated females of the low-level polyandrous (commonly two male mates at maximum Phytoseiulus persimilis produced similar numbers of offspring having similar survival chances. In both species, multiple mating resulted in mixed offspring paternities, opening the chance for indirect fitness benefits such as enhanced genetic compatibility, complementarity and/or variability. However, the female re-mating likelihood and the paternity chance of non-first male mates were lower in P. persimilis than in N. californicus. Regarding proximate factors, in both species first mating duration and female re-mating likelihood were negatively correlated. Based on occasional fertilization failure of first male mates in P. persimilis, and mixed offspring paternities in both species, we argue that fertilization assurance and the chance to gain indirect fitness benefits are the ultimate drivers of polyandry in P. persimilis, whereas those of N. californicus are higher offspring numbers coupled with enhanced offspring viability and possibly other indirect fitness benefits. Overall, the adaptive significance and proximate events well reflected the polyandry levels. Our

Ultimate Drivers and Proximate Correlates of Polyandry in Predatory Mites.

Science.gov (United States)

Schausberger, Peter; Patiño-Ruiz, J David; Osakabe, Masahiro; Murata, Yasumasa; Sugimoto, Naoya; Uesugi, Ryuji; Walzer, Andreas

2016-01-01

Polyandry is more widespread than anticipated from Bateman's principle but its ultimate (evolutionary) causes and proximate (mechanistic) correlates are more difficult to pinpoint than those of polygyny. Here, we combined mating experiments, quantification of reproductive traits and microsatellite genotyping to determine the fitness implications of polyandry in two predatory mite species, where males are highly polygynous (up to 45 fertilized females during life), whereas females range from monandry to various polyandry levels. The medium-level polyandrous (up to eight male mates possible) Neoseiulus californicus received clear direct and indirect benefits: multiply mated females produced more offspring with higher survival chances over longer times than singly mated females. In contrast, singly and multiply mated females of the low-level polyandrous (commonly two male mates at maximum) Phytoseiulus persimilis produced similar numbers of offspring having similar survival chances. In both species, multiple mating resulted in mixed offspring paternities, opening the chance for indirect fitness benefits such as enhanced genetic compatibility, complementarity and/or variability. However, the female re-mating likelihood and the paternity chance of non-first male mates were lower in P. persimilis than in N. californicus. Regarding proximate factors, in both species first mating duration and female re-mating likelihood were negatively correlated. Based on occasional fertilization failure of first male mates in P. persimilis, and mixed offspring paternities in both species, we argue that fertilization assurance and the chance to gain indirect fitness benefits are the ultimate drivers of polyandry in P. persimilis, whereas those of N. californicus are higher offspring numbers coupled with enhanced offspring viability and possibly other indirect fitness benefits. Overall, the adaptive significance and proximate events well reflected the polyandry levels. Our study provides a

Economic impacts of invasive species in forests: past, present, and future.

Science.gov (United States)

Holmes, Thomas P; Aukema, Juliann E; Von Holle, Betsy; Liebhold, Andrew; Sills, Erin

2009-04-01

Biological invasions by nonnative species are a by-product of economic activities, with the vast majority of nonnative species introduced by trade and transport of products and people. Although most introduced species are relatively innocuous, a few species ultimately cause irreversible economic and ecological impacts, such as the chestnut blight that functionally eradicated the American chestnut across eastern North America. Assessments of the economic costs and losses induced by nonnative forest pests are required for policy development and need to adequately account for all of the economic impacts induced by rare, highly damaging pests. To date, countrywide economic evaluations of forest-invasive species have proceeded by multiplying a unit value (price) by a physical quantity (volume of forest products damaged) to arrive at aggregate estimates of economic impacts. This approach is inadequate for policy development because (1) it ignores the dynamic impacts of biological invasions on the evolution of prices, quantities, and market behavior, and (2) it fails to account for the loss in the economic value of nonmarket ecosystem services, such as landscape aesthetics, outdoor recreation, and the knowledge that healthy forest ecosystems exist. A review of the literature leads one to anticipate that the greatest economic impacts of invasive species in forests are due to the loss of nonmarket values. We proposed that new methods for evaluating aggregate economic damages from forest-invasive species need to be developed that quantify market and nonmarket impacts at microscales that are then extended using spatially explicit models to provide aggregate estimates of impacts. Finally, policies that shift the burden of economic impacts from taxpayers and forest landowners onto parties responsible for introducing or spreading invasives, whether through the imposition of tariffs on products suspected of imposing unacceptable risks on native forest ecosystems or by requiring

Review and evaluation of information on the thermal performance of ultimate heat sinks: spray ponds and cooling ponds

International Nuclear Information System (INIS)

Drake, R.L.

1975-09-01

A report is presented which identifies and evaluates available information and data useful in validating and improving existing models for the thermal performance of ultimate heat sinks. Included are discussions of the thermal elements of cooling ponds and spray ponds, the available information and data pertinent to the problem, and the requirements and needs for further research and performance data. An outline is presented of the necessary elements required for a performance test of an ultimate heat sink before the system is thermally approved. (auth)

On the ultimate uncertainty of the top quark pole mass

Energy Technology Data Exchange (ETDEWEB)

Beneke, M. [Technische Univ. Muenchen, Garching (Germany). Physik-Department; Marquard, P. [Deutsches Elektronen-Synchrotron (DESY), Zeuthen (Germany); Nason, P. [INFN, Sezione di Milano Bicocca (Italy); Steinhauser, M. [Karlsruher Institut fuer Technologie (Germany). Inst. fuer Theoretische Teilchenphysik

2016-05-15

We combine the known asymptotic behaviour of the QCD perturbation series expansion, which relates the pole mass of a heavy quark to the MS mass, with the exact series coefficients up to the four-loop order to determine the ultimate uncertainty of the top-quark pole mass due to the renormalon divergence. We perform extensive tests of our procedure by varying the number of colours and flavours, as well as the scale of the strong coupling and the MS mass, and conclude that this uncertainty is around 70 MeV. We further estimate the additional contribution to the mass relation from the five-loop correction and beyond to be 250 MeV.

On the ultimate uncertainty of the top quark pole mass

International Nuclear Information System (INIS)

Beneke, M.; Nason, P.; Steinhauser, M.

2016-05-01

We combine the known asymptotic behaviour of the QCD perturbation series expansion, which relates the pole mass of a heavy quark to the MS mass, with the exact series coefficients up to the four-loop order to determine the ultimate uncertainty of the top-quark pole mass due to the renormalon divergence. We perform extensive tests of our procedure by varying the number of colours and flavours, as well as the scale of the strong coupling and the MS mass, and conclude that this uncertainty is around 70 MeV. We further estimate the additional contribution to the mass relation from the five-loop correction and beyond to be 250 MeV.

The Influence of Wagon Structure Part Shape Optimization on Ultimate Fatigue Strength

OpenAIRE

Milovanović, Vladimir; Živković, Miroslav; Jovičić, Gordana; Živković, Jelena; Kozak, Dražan

2016-01-01

This study investigates how shape optimisation affects the ultimate fatigue strength of a mechanical part. The mechanical part chosen for this investigation is an axle guard of running gear elements of the Hccrrs 2x2 axle car-carrying wagon. The static and fatigue strength analysis procedure according to the UIC 517 standard and numerical methods have been applied. Material properties were determined experimentally and the necessary numerical calculations were performed by using the finite el...

Intrinsically Safe and Economical Reactor (ISER)

International Nuclear Information System (INIS)

Wakabayashi, Hiroaki; Asahi, Yoshiro

1991-01-01

The Intrinsically Safe and Economical Reactor (ISER) is designed based on the principle of a process inherent ultimate safe reactor, PIUS, a so-called inherently safe reactor (ISR). ISER has been developed joingly by the members of the Kanagawa Institute of Technology, the University of Tokyo, the Japan Atomic Energy Research Institute (JAERI) and several industrial firms in Japan. This paper describes the requirements for the next generation of power reactor, the safety design philosphy of ISR and ISER, the controllability of ISER and the results of analyses of some of the design-based accidents (DBA) of ISER, namely station blackout, accidents in which the pressurizer relief valve becomes jammed and stuck in open position and tube breaks in the steam generator. It is concluded that the ISER can ensure a wide range of contraollabitily and fuel integrity for all the analysed DBAs. (orig.)

Fuels planning: science synthesis and integration; economic uses fact sheet 03: economic impacts of fuel treatments

Science.gov (United States)

Rocky Mountain Research Station USDA Forest Service

2004-01-01

With increased interest in reducing hazardous fuels in dry inland forests of the American West, agencies and the public will want to know the economic impacts of fuel reduction treatments. This fact sheet discusses the economic impact tool, a component of My Fuel Treatment Planner, for evaluating economic impacts.

ECONOMIC VALUE ADDED SEBAGAI UKURAN KEBERHASILAN KINERJA MANAJEMEN PERUSAHAAN

Directory of Open Access Journals (Sweden)

Lisa Linawati Utomo

1999-01-01

Full Text Available The company's performance is mostly measured by analysis based on the financial ratio for a specific period. This type of measurement is highly dependent upon the accounting methods used in preparing the financial statement. Therefore a company's performance often looks good and improving overtime, but in reality its performance is deteriorating. The unreliable accounting measure needs an improved performance measure that will recognize and encourage management actions and strategies to increase the overall value of the company and ultimately to punish any activity that reduce value. The introduction of Economic Value Added (EVA has been very relevant recently because based on its definition, EVA measures the amount of value added created by specific action or strategy taken in a company. EVA is also used in the process of goal setting, capital budgeting, performance assessment, and most importantly, incentive compensation within a company. Its implication to the overall being of a company is so important these days that it should not be overlooked when companies plan their strategies. Abstract in Bahasa Indonesia : Kinerja sebuah perusahaan lebih banyak diukur berdasarkan rasio-rasio keuangan selama satu periode tertentu. Pengukuran berdasarkan rasio keuangan ini sangatlah bergantung pada metode atau perlakuan akuntansi yang digunakan dalam menyusun laporan keuangan perusahaan. Sehingga seringkali kinerja perusahaan terlihat baik dan meningkat, yang mana sebenarnya kinerja tidak mengalami peningkatan dan bahkan menurun. Diperlukannya suatu alat ukur kinerja yang menunjukkan prestasi manajemen sebenarnya dengan tujuan untuk mendorong aktivitas atau strategi yang menambah nilai ekonomis (value added activities dan menghapuskan aktivitas yang merusak nilai (non-value added activities. Economic Value Added (EVA sangat relevan dalam hal ini karena EVA dapat mengukur kinerja (prestasi manajemen berdasarkan besar kecilnya nilai tambah yang diciptakan

An experimental investigation on the ultimate strength of epoxy repaired braced partial infilled RC frames

Science.gov (United States)

Dubey, Shailendra Kumar Damodar; Kute, Sunil

2014-09-01

Due to earthquake, buildings are damaged partially or completely. Particularly structures with soft storey are mostly affected. In general, such damaged structures are repaired and reused. In this regard, an experimental investigation was planned and conducted on models of single-bay, single-storey of partial concrete infilled reinforced concrete (RC) frames up to collapse with corner, central and diagonal steel bracings. Such collapsed frames were repaired with epoxy resin and retested. The initiative was to identify the behaviour, extent of restored ultimate strength and deflection of epoxy-retrofitted frames in comparison to the braced RC frames. The performance of such frames has been considered only for lateral loads. In comparison to bare RC frames, epoxy repaired partial infilled frames have significant increase in the lateral load capacity. Central bracing is more effective than corner and diagonal bracing. For the same load, epoxy repaired frames have comparable deflection than similar braced frames.

Bootstrap calculation of ultimate strength temperature maxima for neutron irradiated ferritic/martensitic steels

Science.gov (United States)

Obraztsov, S. M.; Konobeev, Yu. V.; Birzhevoy, G. A.; Rachkov, V. I.

2006-12-01

The dependence of mechanical properties of ferritic/martensitic (F/M) steels on irradiation temperature is of interest because these steels are used as structural materials for fast, fusion reactors and accelerator driven systems. Experimental data demonstrating temperature peaks in physical and mechanical properties of neutron irradiated pure iron, nickel, vanadium, and austenitic stainless steels are available in the literature. A lack of such an information for F/M steels forces one to apply a computational mathematical-statistical modeling methods. The bootstrap procedure is one of such methods that allows us to obtain the necessary statistical characteristics using only a sample of limited size. In the present work this procedure is used for modeling the frequency distribution histograms of ultimate strength temperature peaks in pure iron and Russian F/M steels EP-450 and EP-823. Results of fitting the sums of Lorentz or Gauss functions to the calculated distributions are presented. It is concluded that there are two temperature (at 360 and 390 °C) peaks of the ultimate strength in EP-450 steel and single peak at 390 °C in EP-823.

Ultimate shearing strength of aseismatic walls with many small holes for reactor buildings

International Nuclear Information System (INIS)

Yoshizaki, Seiji; Ezaki, Tetsuro; Korenaga, Takeyoshi; Sotomura, Kentaro.

1984-01-01

The aseismatic walls for reactor buildings have complicated forms, and are characterized by large wall thickness and high reinforcement ratio as compared with ordinary aseismatic walls. The forms are mainly box, cylinder or irregular polygonal prism and their combination. The design of the walls with many small holes has been performed on the basis of the reinforced concrete structure calculation standard of the Architectural Institute of Japan, following the case with large opening. When there are many small holes, the arrangement of reinforcement for the openings becomes complex, and the construction is difficult. It is necessary to rationalize the design and to simplify the reinforcement work. Under the background like this, the experiment to examine the shearing property in bending of the aseismatic walls with many small holes for reactor buildings was carried out, and horizontal loading test was performed on 43 specimens. The method of calculating the ultimate shearing strength of a wall without opening was proposed, and the method of applying it to a wall with many small holes is shown. The experimental method and the results, the examination of the experimental results, and the ultimate shearing strength of the aseismatic walls are reported. (Kako, I.)

An Employee Assistance Curriculum: The Ultimate Collaborative Function.

Science.gov (United States)

Epstein, Howard V.; Perryman, William J.

Employees who abuse alcohol and drugs experience lost efficiency, absenteeism, poor decision making, and accidents. The economic losses to employers resulting from such abuse and the belief that employers should help employees with personal problems have stimulated corporations and unions to develop employee assistance programs (EAPs). These…

Discussion of the Method to Determine the Ultimate Bearing Capacity of Soil Foundation

Science.gov (United States)

Du, Peng; Liu, Xiaoling; Zhang, Yangfu

2017-12-01

Combining literature examples, this paper has carried out Contrastive analysis of the theoretical formula method and finite element method about the ultimate bearing capacity of foundation, To verify rationality and superiority of the incremental load method in finite element ABAQUS in solving the bearing capacity of foundation soil. The study can provide certain reference for practical engineering calculation and analysis of foundation bearing capacity.

Lava ultimate resin nano ceramic for CAD/ CAM: customization case study.

Science.gov (United States)

Koller, M; Arnetzl, G V; Holly, L; Arnetzl, G

2012-01-01

Lava Ultimate Resin Nano Ceramic (RNC) blocks are innovative new CAD/CAM materials that make it possible to achieve superior esthetic results in easy steps. The blocks are made of nano ceramic particles embedded in a highly cured resin matrix. Therefore, composite materials can be used to characterize and adjust resin nano ceramic restorations after milling. The milled RNC restorations can be individualized intra-orally or extra-orally, either before or after insertion. Unlike conventional ceramic restorations, customization and glaze firing is neither necessary nor possible with RNC restorations. This opens up the opportunity for intraoral individualization and adaptation of the restorations.

Ultimate strength analysis of long-span cable-stayed bridges; Chodai chachokyo no shukyoku kyodo kaiseki to kyodo ni kansuru ichikosatsu

Energy Technology Data Exchange (ETDEWEB)

Xie, X.; Yamaguchi, H. [Saitama Univ., Urawa (Japan)] Nagai, M. [Nagaoka Technical Coll., Niigata (Japan)

1998-07-21

Recently, span of cable-stayed bridges has been getting loner and longer, present situation is that cable-stayed bridges with span 600 to 800m class have been built inside and outside the country, and accurate determination of its ultimate strength has been an important problem statistically. However, concrete design method for evaluating load bearing stress of long-span cable-stayed bridge. Particularly of the main beam whose axial stress is dominating, has not been established so far. As for cable-stayed bridge, even for long-span, effect of plasticization of cross section on ultimate strength is severe because there is little effect of geometric nonlinearity and it is thought that accurate evaluation of ultimate strength only by elastic finite potential analysis is difficult. Accordingly, it is necessary to study the behavior by using combined nonlinear analysis considering the nonlinearity of the material in order to evaluate the safety and economy to long-span cable-stayed bridge. In this report, 3 dimensional analysis method was formularized taking into account the combine nonlinearity of multi-box girder and analysis program of ultimate strength behavior of long-span cable-stayed bridge was developed. 19 refs., 17 figs., 2 tabs.

Undergraduate Economics Journals: Learning by Doing

Science.gov (United States)

Leekley, Robert M.; Davis-Kahl, Stephanie; Seeborg, Michael C.

2013-01-01

Although there are currently only a few undergraduate journals in economics, we expect their numbers to increase substantially in the future because of several developments: (1) research and writing activity is increasing in economics programs, (2) online publication is now more feasible and cost efficient than ever, and (3) students are…

Intellectual property: A strong determinant of economic growth

Directory of Open Access Journals (Sweden)

Munmun Rai

2009-01-01

Full Text Available The returns from almost all human endeavors can ultimately be translated into monetary gains. The past few years have seen increased attention paid to the strengthening of intellectual property rights due to globalization. The development of Intellectual property rights (IPR over the years has invariably brought an upsurge in the outlook of nations toward the aspect of societal and cultural growth, this being said with the preliminary assumption that economic growth has been the most affected realm and that it requires a separate spectrum of analysis. The artifacts between the IP regime and the national economy can be easily interpreted by the fact that India′s independence had itself brought an era where the enactment of the national IP laws were considered to stand on the touchstone of the market economy. The aim of the present article is to investigate the impact of a strong IP regime on the economic development of a nation and also a light is raised into Indian economy, and the creation of an efficient innovative system is discussed. A strong relation of the IPR with the pharma and biotech sectors has been discussed. Undoubtedly, the Intellectual property (IP systems must be developed so as to bring in socioeconomic well-being. The fact that a strong IPR actually provokes IPR infringements in many developing nations also seems to be an issue that needs to be analyzed while understanding the need of the former. The trade-off between unfair competition laws and IP also assumes importance of high magnitude and hence needs to be particularly emphasized. With the growing recognition of IPR, the importance of worldwide forums on IPR has been realized. Companies, universities, and industries want to protect their IPR internationally. In order to reach this goal, countries have signed numerous agreements and treaties.

A New Algorithm for Determining Ultimate Pit Limits Based on Network Optimization

OpenAIRE

Ali Asghar Khodayari

2013-01-01

One of the main concerns of the mining industry is to determine ultimate pit limits. Final pit is a collection of blocks, which can be removed with maximum profit while following restrictions on the slope of the mine’s walls. The size, location and final shape of an open-pit are very important in designing the location of waste dumps, stockpiles, processing plants, access roads and other surface facilities as well as in developing a production program. There are numerous methods for designing...

Economic Theory, Economic Reality And Economic Policy

Directory of Open Access Journals (Sweden)

Dmitry Evgenievich Sorokin

2015-03-01

Full Text Available This paper analyzes the opposition between the «liberals» and «statists» in the Russian political and economic thought. It demonstrates that the economic liberalization is an absolute prerequisite for the transition to sustainable socio-economic development. Such development must rely on investment activities of the state, which in the current circumstances is a necessary but not sufficient measure for reversing the negative trends. The negative developments can be prevented only through implementation, along with the institutional changes in the economic area that form a strata of economically independent entrepreneurs-innovators, of no less profound transformation in political institutions aimed at democratization of public life

Multiple (Two) Met Bel 601 In Series Ultimate Vacuum Testing

Energy Technology Data Exchange (ETDEWEB)

Restivo, M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

2016-09-30

SRNL Environmental and Chemical Process Technology (E&CPT) was requested to perform testing of vacuum pumps per a verbal request from the Customer, SRNL Hydrogen Processing Technology. Tritium Operations is currently having difficulties procuring the Normetex™® Model 15 m³/hr (9 CFM) vacuum pump (formerly Normetex Pompes, now Eumeca_SARL). One possible solution proposed by Hydrogen Processing Technology personnel is to use two Senior Aerospace Metal Bellows MB-601 vacuum pumps piped with the heads in series, and the pumps in series (Figure 1 below). This memorandum documents the ultimate vacuum testing that was performed to determine if this concept was a viable alternate vacuum pump strategy. This testing dovetails with previous pump evaluations documented in references 1 and 2.

On the ultimate uncertainty of the top quark pole mass

Science.gov (United States)

Beneke, M.; Marquard, P.; Nason, P.; Steinhauser, M.

2017-12-01

We combine the known asymptotic behaviour of the QCD perturbation series expansion, which relates the pole mass of a heavy quark to the MS ‾ mass, with the exact series coefficients up to the four-loop order to determine the ultimate uncertainty of the top-quark pole mass due to the renormalon divergence. We perform extensive tests of our procedure by varying the number of colours and flavours, as well as the scale of the strong coupling and the MS ‾ mass. Including an estimate of the internal bottom and charm quark mass effect, we conclude that this uncertainty is around 110 MeV. We further estimate the additional contribution to the mass relation from the five-loop correction and beyond to be around 300 MeV.

Exploring economic structure and drivers of economic growth in Botswana

Directory of Open Access Journals (Sweden)

Patricia Lindelwa Makoni

2015-12-01

Full Text Available This article set out to analyse the economic structure and main economic drivers in Botswana. Botswana, a country in sub-Saharan Africa, is a relatively small economy, hugely dependent on its diamond mineral wealth. Concerns have arisen in recent years that the diamond deposits will soon be depleted and the country therefore needs to embark on a diversification programme to broaden its economic base. In order to understand the Botswana economy, its economic structure and current domestic sectorial performance were evaluated, as well as its trends in imports and exports. An analysis of the data shows that, regardless of the awareness of the sensitivity to external shocks of commodity prices, as well as the obvious future depletion of diamond reserves, the Botswana economy continues to rely on diamonds, at the expense of attracting international capital flows to enhance and maintain sustainable economic growth, through investments in agriculture, manufacturing and tourism. It is therefore recommended that the Government of Botswana becomes proactive and implements recommended policies to diversify its economy, so that it can sustain or improve its economic growth by becoming a prime destination of international capital and domestic private sector investment, thereby increasing employment and trade opportunities.

COLLECTIVE VORTEX BEHAVIORS: DIVERSITY, PROXIMATE, AND ULTIMATE CAUSES OF CIRCULAR ANIMAL GROUP MOVEMENTS.

Science.gov (United States)

Delcourt, Johann; Bode, Nikolai W F; Denoël, Mathieu

2016-03-01

Ant mill, caterpillar circle, bat doughnut, amphibian vortex, duck swirl, and fish torus are different names for rotating circular animal formations, where individuals turn around a common center. These "collective vortex behaviors" occur at different group sizes from pairs to several million individuals and have been reported in a large number of organisms, from bacteria to vertebrates, including humans. However, to date, no comprehensive review and synthesis of the literature on vortex behaviors has been conducted. Here, we review the state of the art of the proximate and ultimate causes of vortex behaviors. The ubiquity of this behavioral phenomenon could suggest common causes or fundamental underlying principles across contexts. However, we find that a variety of proximate mechanisms give rise to vortex behaviors. We highlight the potential benefits of collective vortex behaviors to individuals involved in them. For example, in some species, vortices increase feeding efficiency and could give protection against predators. It has also been argued that vortices could improve collective decision-making and information transfer. We highlight gaps in our understanding of these ubiquitous behavioral phenomena and discuss future directions for research in vortex studies.

THE IMPACT OF THE FINANCIAL AND ECONOMIC CRISIS ON THE EVOLUTION AND STRUCTURE OF UNEMPLOYMENT IN ROMANIA

Directory of Open Access Journals (Sweden)

Lazăr Mirela

2013-06-01

Full Text Available Unemployment represents one of the economic and social phenomena highly sensitive to changes in the dynamics and structure of the national economy. The impact of the financial crisis, triggered at the end of 2008, had dramatic consequences also on the Romanian economy, which was still fragile and quickly responded as a restriction, a retreat, both preventively and curatively. Negative evolutions occurred in the immediate future in all areas, both economic and social, for many economic operators unemployment representing one of the alternatives to "mitigate" the effects of the crisis. In this context, the paper approaches a series of theoretical aspects related to determining the unemployment indicators and presents the evolution of the main field indicators, in Romania, after 2008, to highlight the negative influence of the global financial and economical crisis. Thus, the analysis of unemployment in Romania after 2008, the year that marked the beginning of the financial crisis, showed a rapid and significant increase of it, at least in 2009, illustrating this thorough the immediate reaction the significant impact of the crisis on the Romanian economy. Although the years 2010 and 2012 showed a slight easing of the situation, the beginning of 2013, as a consequence of the deepening financial problems and of a particularly tense global climate, marked a new period of rising unemployment. Recourse to unemployment, as a result and in response to the financial crisis is a measure which, although apparently has a preventive character of bankruptcy, it will surely not give positive results in the future. It is just a postponement of it, which will ultimately lead to the drastic compression of the activity, to the collapse.

Accounting conservatism,ultimate ownership and investment efficiency

Institute of Scientific and Technical Information of China (English)

Xiaodong Xu; Xia Wang; Nina Han

2012-01-01

Purpose-The purpose of this paper is to analyze and examine the role of accounting conservatism on firm investment behavior in China.Design/methodology/approach-By combining a developed theoretical framework and empirical study,this paper examines the impacts of accounting conservatism on firm investment.The sample and data are all collected from Wind and CAMAR databases.Findings-The paper finds that the association between accounting conservatism and capital expenditure is significantly positive when inside capital is not enough to use for investment,suggesting that conservatism can expend the level of investment by decreasing information asymmetry and cost of capital;however,the association between accounting conservatism and capital expenditure is significantly negative when inside capital is enough to use for investment,suggesting that conservatism can curtail the level of investment by mitigating the interest conflicts between management and outside shareholders and decreasing agency costs.Additionally,the paper finds that the severity of information asymmetry and agency problem affects the role of accounting conservatism on firm investment behaviour,and the association between accounting conservatism and capital expenditure is weaker for firms with ultimate ownership controller as local government or individuals.Originality/value-This is the first paper to analyze and examine the impacts of accounting conservatism on firm investment in China directly.The findings are also useful to explain the awkward predicament found by prior literature.

Identifying solutions to increase participation in physical activity interventions within a socio-economically disadvantaged community: a qualitative study.

Science.gov (United States)

Cleland, Claire L; Hunter, Ruth F; Tully, Mark A; Scott, David; Kee, Frank; Donnelly, Michael; Prior, Lindsay; Cupples, Margaret E

2014-05-23

There is an urgent need to increase population levels of physical activity, particularly amongst those who are socio-economically disadvantaged. Multiple factors influence physical activity behaviour but the generalisability of current evidence to such 'hard-to-reach' population subgroups is limited by difficulties in recruiting them into studies. Also, rigorous qualitative studies of lay perceptions and perceptions of community leaders about public health efforts to increase physical activity are sparse. We sought to explore, within a socio-economically disadvantaged community, residents' and community leaders' perceptions of physical activity (PA) interventions and issues regarding their implementation, in order to improve understanding of needs, expectations, and social/environmental factors relevant to future interventions. Within an ongoing regeneration project (Connswater Community Greenway), in a socio-economically disadvantaged community in Belfast, we collaborated with a Community Development Agency to purposively sample leaders from public- and voluntary-sector community groups and residents. Individual semi-structured interviews were conducted with 12 leaders. Residents (n = 113), of both genders and a range of ages (14 to 86 years) participated in focus groups (n = 14) in local facilities. Interviews and focus groups were recorded, transcribed verbatim and analysed using a thematic framework. Three main themes were identified: awareness of PA interventions; factors contributing to intervention effectiveness; and barriers to participation in PA interventions. Participants reported awareness only of interventions in which they were involved directly, highlighting a need for better communications, both inter- and intra-sectoral, and with residents. Meaningful engagement of residents in planning/organisation, tailoring to local context, supporting volunteers, providing relevant resources and an 'exit strategy' were perceived as important factors

Clickenomics: Using a Classroom Response System to Increase Student Engagement in a Large-Enrollment Principles of Economics Course

Science.gov (United States)

Salemi, Michael K.

2009-01-01

One of the most important challenges facing college instructors of economics is helping students engage. Engagement is particularly important in a large-enrollment Principles of Economics course, where it can help students achieve a long-lived understanding of how economists use basic economic ideas to look at the world. The author reports how…

The legal ensurance of underground ultimate storage of radioactive wastes without risk

International Nuclear Information System (INIS)

Prasse, R.

1974-01-01

1. The legal position towards the property owner: a) with a view to the freedom of property claim, b) in the light of the influence of the property owner. 2. The legal position towards the neighbouring property owners: a) resistance rights of the body corporate responsible for the ultimate storage, b) resistance rights of the neighbouring property owner. 3. The legal position towards those authorized to mine: a) mining free minerals, b) mining minerals reserved for the state. 4. The legal position towards prospectors. (orig./HP) [de

Theoretical and methodological basis for the formation and evaluation of the level of the economic system's strategic economic potential

Directory of Open Access Journals (Sweden)

Kljushin Vladislav Vladimirovich

2014-12-01

Full Text Available The current level of business activity of socio-economic systems of different scale and insufficient to increase their overall potential. To solve this problem, the first priority is the effective management of their strategic and economic potential. Managerial decision-making about the use of economic resources strategic socio-economic systems requires the development of a methodology to identify and evaluate strategic and economic potential.

Accelerator physics and technology limitations to ultimate energy and luminosity in very large hadron colliders

Energy Technology Data Exchange (ETDEWEB)

P. Bauer et al.

2002-12-05

The following presents a study of the accelerator physics and technology limitations to ultimate energy and luminosity in very large hadron colliders (VLHCs). The main accelerator physics limitations to ultimate energy and luminosity in future energy frontier hadron colliders are synchrotron radiation (SR) power, proton-collision debris power in the interaction regions (IR), number of events-per-crossing, stored energy per beam and beam-stability [1]. Quantitative estimates of these limits were made and translated into scaling laws that could be inscribed into the particle energy versus machine size plane to delimit the boundaries for possible VLHCs. Eventually, accelerator simulations were performed to obtain the maximum achievable luminosities within these boundaries. Although this study aimed at investigating a general VLHC, it was unavoidable to refer in some instances to the recently studied, [2], 200 TeV center-of-mass energy VLHC stage-2 design (VLHC-2). A more thorough rendering of this work can be found in [3].

Institutional factor in international economic activity of region and its socio-economic development

Directory of Open Access Journals (Sweden)

Elena Leonidovna Andreeva

2016-12-01

Full Text Available The article substantiates the impact of the institutional factor on the development of regional international economic relations. The scope of the study is regional international economic activity (IEA, the subject-matter is the role of the institutional factor in its development. The study purpose is to develop a scientific approach for the assessment of the institutional factor impact on the development of region’s international economic relations. The hypothesis is that the targeted efforts of all participants of IEA of the region (business, authorities, local community to strengthen of theese components of the institutional factor, which have a strong influence on the regional socio-economic development. A methodological approach for the assessment of this influenceis developed. It includes determining three elements of IEA institutionalization—agreements, organizations, events. A three-dimensional model is proposed for the coordination of these elements with 3 groups of countries—developed, developing and CIS, including the Eurasian Economic Union, and also with basic indexes characterizing the qualitative and quantitative contribution of region’s IEA into its socio-economic development. This model is tested on the example of the Sverdlovsk region of Russia for 2003–2015. That has allowed to define various kinds of the effects from strenthening the IEA institutional component, which are expressed in the increase of the export of the region, improvement of its investment attractiveness, the diversification of regional economy as well as the the generation of additional jobs and tax flows increase.

A New Algorithm for Determining Ultimate Pit Limits Based on Network Optimization

Directory of Open Access Journals (Sweden)

Ali Asghar Khodayari

2013-12-01

Full Text Available One of the main concerns of the mining industry is to determine ultimate pit limits. Final pit is a collection of blocks, which can be removed with maximum profit while following restrictions on the slope of the mine’s walls. The size, location and final shape of an open-pit are very important in designing the location of waste dumps, stockpiles, processing plants, access roads and other surface facilities as well as in developing a production program. There are numerous methods for designing ultimate pit limits. Some of these methods, such as floating cone algorithm, are heuristic and do not guarantee to generate optimum pit limits. Other methods, like Lerchs–Grossmann algorithm, are rigorous and always generate the true optimum pit limits. In this paper, a new rigorous algorithm is introduced. The main logic in this method is that only positive blocks, which can pay costs of their overlying non-positive blocks, are able to appear in the final pit. Those costs may be paid either by positive block itself or jointly with other positive blocks, which have the same overlying negative blocks. This logic is formulated using a network model as a Linear Programming (LP problem. This algorithm can be applied to two- and three-dimension block models. Since there are many commercial programs available for solving LP problems, pit limits in large block models can be determined easily by using this method.

Economic Analysis Supporting the Increase of the Unspecified Minor Military Construction Threshold

Science.gov (United States)

2016-06-01

rates. Some even go as far as including productivity rates, taxes and insurance costs . A complete breakdown, conducted by OSD, of all the major indices...of technical solution. (6) Completeness of scope and cost estimate. (7) Adequacy of economic analysis (when required). (8) Compliance with the...and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188) Washington, DC 20503. 1. AGENCY USE ONLY (Leave blank) 2

Commentary: Monozygotic twins or unrelated stepchildren? On the relationship between economic psychology and behavioral economics

NARCIS (Netherlands)

Fetchenhauer, D.; Azar, O.H.; Antonides, G.; Dunning, D.; Frank, R.H.; Lea, S.; Ölander, F.

2012-01-01

Recent years have seen increased cooperation between psychologists and economists. This is mirrored in interdisciplinary journals (like the Journal of Economic Psychology or the Journal of Socio-Economics) as well as in interdisciplinary conferences. During one of these conferences, The IAREP/SABE

15 CFR Supplement No. 3 to Part 748 - BIS-711, Statement by Ultimate Consignee and Purchaser Instructions

Science.gov (United States)

2010-01-01

...” include: contractual, franchise, distributor, wholesaler, continuing and regular individual business, etc... persons, other than employees of the ultimate consignee or purchaser, who assisted in the preparation of...

Efficiency Of Different Teaching Models In Teaching Of Frisbee Ultimate

Directory of Open Access Journals (Sweden)

Žuffová Zuzana

2015-05-01

Full Text Available The aim of the study was to verify the efficiency of two frisbee ultimate teaching models at 8-year grammar schools relative to age. In the experimental group was used a game based model (Teaching Games for Understanding and in the control group the traditional model based on teaching techniques. 6 groups of female students took part in experiment: experimental group 1 (n=10, age=11.6, experimental group 2 (n=12, age=13.8, experimental group 3 (n=14, age =15.8, control group 1 (n=11, age =11.7, control group 2 (n=10, age =13.8 and control group 3 (n=9, age =15.8. Efficiency of the teaching models was evaluated based of game performance and special knowledge results. Game performance was evaluated by the method of game performance assessment based on GPAI (Game Performance Assessment Instrument through video record. To verify level of knowledge, we used a knowledge test, which consisted of questions related to the rules and tactics knowledge of frisbee ultimate. To perform statistical evaluation Mann-Whitney U-test was used. Game performance assessment and knowledge level indicated higher efficiency of TGfU in general, but mostly statistically insignificant. Experimental groups 1 and 2 were significantly better in the indicator that evaluates tactical aspect of game performance - decision making (p<0.05. Experimental group 3 was better in the indicator that evaluates skill execution - disc catching. The results showed that the students of the classes taught by game based model reached partially better game performance in general. Experimental groups achieved from 79.17 % to 80 % of correct answers relating to the rules and from 75 % to 87.5 % of correct answers relating to the tactical knowledge in the knowledge test. Control groups achieved from 57.69 % to 72.22 % of correct answers relating to the rules and from 51.92 % to 72.22 % of correct answers relating to the tactical knowledge in the knowledge test.

The Economic Crisis and Sustainable Development

DEFF Research Database (Denmark)

Lund, Henrik; Hvelplund, Frede

2012-01-01

of sustainable energy solutions involves the replacement of imported fossil fuels by substantial investments in energy conservation and renewable energy (RE). In such situation, it becomes increasingly essential to develop economic thinking and economic models that can analyse the concrete institutions in which......This paper presents Concrete Institutional Economics as an economic paradigm to understand how the wish for sustainable energy in times of economiccrisis can be used to generate jobs as well as economic growth. In most countries, including European countries, the USA and China, the implementation...

A strategy for an advanced nuclear-electric sector - proliferation-proof, environmentally-sound, economical

International Nuclear Information System (INIS)

Walter, C.E.

1995-01-01

A strategy is proposed for deployment of an advanced nuclear-electric power sector that is ultimately fueled only by recycled uranium. The sector is optimized on a system basis to meet several objectives in the context of international safeguards against diversion of plutonium and proliferation of nuclear weapons. These objectives include: generation of electric power efficiently and economically; performance with utmost predictable safety; minimization of environmental impacts through conservation of natural resources, consumption of actinides and long-lived fission products, and responsible disposal of unavoidable waste; and consumption of spent fuel from currently used reactors. (author)

Increase in cellular concrete resistance to brittle fracture

International Nuclear Information System (INIS)

Chernyshov, E.M.; Krokhin, A.M.

1979-01-01

Considered are theoretical premises of decrease in cellular concrete resistance to brittle fracture at the expense of dispersed reinforcement. It is stated experimentally that the introduction of 3% asbestos fibers permits to increase the ultimate extensibility and strength during cellular concrete tension by 15-30% and to increase in unit rupture work 1.4-1.6 time more and therefore to decrease its brittleness

Effects of Credit on Economic Growth, Unemployment and Poverty

Directory of Open Access Journals (Sweden)

Mangasa Augustinus Sipahutar

2016-06-01

              Effect of credit on economic growth, unemployment and poverty provides evidence from Indonesia on the role of banks credit for promoting economic growth and reducing both unemployment and poverty.  To document the link between banks credit and economic growth, we estimate a VAR model and variance decompositions of annual GDP per capita growth rates to examine what proxy measures of banks credit are most important in accounting for economic growth over time and how much they contribute to explaining economic growth.  We also estimate an ECM to document the relationship between banks credit to both unemployment and poverty.  This paper revealed bi-direction causality between banks credit and economic growth.  Banks credit promotes economic growth and economic growth affects credit depth and financial development.  Furthermore, banks credit is a growth accelerating factor on Indonesian economic growth.  Banks credit is an endogenous growth and a good predictor on Indonesian economy. Our estimation model explained that credit allocated by banks increases business escalation to the real sectors then promotes economic growth, decreases unemployment rate through increasing in labor demanded, increases income and then decrease poverty.  This overall transmission mechanism just occurred through presence of banks credit by increasing money supply to the real sectors, promotes growth and social welfare.   Keywords :  banks credit, economic growth, growth accelerating factor, poverty, unemployment   JEL Classification : E51, E52, E58

Investigations on the ultimate compressive strength of composite plates with geometrical imperfections

DEFF Research Database (Denmark)

Misirlis, K.; Downes, J.; Dow, R.S.

2009-01-01

with initial geometric imperfections. This paper presents the validation of finite element models against a series of plate tests that were performed within this framework and parametric studies that were carried out to identify the effects of geometric imperfections on the ultimate compressive strength......A series of studies has been performed within the MARSTRUCT Network of Excellence on Marine Structures in order to investigate the buckling response of glass fibre reinforced polymer plates. These studies include the fabrication, testing and finite element analysis of a large number of plates...

Neoclassical economic orthodoxy and the need for a new post-crisis economic paradigm

Directory of Open Access Journals (Sweden)

Andrei JOSAN

2013-08-01

Full Text Available Capitalism is a social adaptive system that evolve, change and grow in response to the challenges of a rapidly changing economic environment. When capitalism is seriously threatened by a systemic crisis, a new version much better adapted to existing conditions appears. Critical analysis of the fundamental ideas underlying neoclassical economic theory shows that the capitalist system is fundamentally a dynamic and therefore static neoclassical models proved to be unsuitable for studying it. Contrary to neoclassical economic vision, the capitalist economy is not governed by immutable economic laws. Global systemic crisis of capitalism that began in 2007 has highlighted the need for a new economic paradigm on which to be built and to be performed a new version of capitalism, in line with the increasingly complex realities of a globalized and quick changing world.

A Pedagogical Note on Modeling the Economic Benefit of Emissions Abatement vs. the Economic Harm from Emissions

OpenAIRE

Christopher S. Decker

2012-01-01

The number of undergraduate-level textbooks on environmental economics has increased in recent years, but the textbook treatment of optimal emissions (abatement) varies markedly from textbook to textbook. In particular, there is no consensus as to whether to model the economic “bad” (i.e. emissions) or the economic “good” (abatement). This inconsistency can lead to some needless confusion for students introduced to environmental economics for the first time, particularly those students outsid...

Introduction to health economics and decision-making: Is economics relevant for the frontline clinician?

Science.gov (United States)

Goeree, Ron; Diaby, Vakaramoko

2013-12-01

In a climate of escalating demands for new health care services and significant constraints on new resources, the disciplines of health economics and health technology assessment (HTA) have increasingly been turned to as explicit evidence-based frameworks to help make tough health care access and reimbursement decisions. Health economics is the discipline of economics concerned with the efficient allocation of health care resources, essentially trying to maximize health benefits to society contingent upon available resources. HTA is a broader field drawing upon several disciplines, but which relies heavily upon the tools of health economics and economic evaluation. Traditionally, health economics and economic evaluation have been widely used at the political (macro) and local (meso) decision-making levels, and have progressively had an important role even at informing individual clinical decisions (micro level). The aim of this paper is to introduce readers to health economics and discuss its relevance to frontline clinicians. Particularly, the content of the paper will facilitate clinicians' understanding of the link between economics and their medical practice, and how clinical decision-making reflects on health care resource allocation. Copyright © 2013 Elsevier Ltd. All rights reserved.

The Metaphysics of Economic Exchanges

Directory of Open Access Journals (Sweden)

Massin Olivier

2017-05-01

Full Text Available What are economic exchanges? The received view has it that exchanges are mutual transfers of goods motivated by inverse valuations thereof. As a corollary, the standard approach treats exchanges of services as a subspecies of exchanges of goods. We raise two objections against this standard approach. First, it is incomplete, as it fails to take into account, among other things, the offers and acceptances that lie at the core of even the simplest cases of exchanges. Second, it ultimately fails to generalize to exchanges of services, in which neither inverse preferences nor mutual transfers hold true. We propose an alternative definition of exchanges, which treats exchanges of goods as a special case of exchanges of services and which builds in offers and acceptances. According to this theory: (i The valuations motivating exchanges are propositional and convergent rather than objectual and inverse; (ii All exchanges of goods involve exchanges of services/actions, but not the reverse; (iii Offers and acceptances, together with the contractual obligations and claims they bring about, lie at the heart of all cases of exchange.

Functional and rheological properties of proteins in frozen turkey breast meat with different ultimate pH.

Science.gov (United States)

Chan, J T Y; Omana, D A; Betti, M

2011-05-01

Functional and rheological properties of proteins from frozen turkey breast meat with different ultimate pH at 24 h postmortem (pH(24)) have been studied. Sixteen breast fillets from Hybrid Tom turkeys were initially selected based on lightness (L*) values for each color group (pale, normal, and dark), with a total of 48 breast fillets. Further selection of 8 breast samples was made within each class of meat according to the pH(24). The average L* and pH values of the samples were within the following range: pale (L* >52; pH ≤5.7), normal (46 meat, respectively. Ultimate pH did not cause major changes in the emulsifying and foaming properties of the extracted sarcoplasmic and myofibrillar proteins. An SDS-PAGE profile of proteins from low and normal pH meat was similar, which revealed that the extent of protein denaturation was the same. Low pH meat had the lowest water-holding capacity compared with normal and high pH meat as shown by the increase in cooking loss, which can be explained by factors other than protein denaturation. Gel strength analysis and folding test revealed that gel-forming ability was better for high pH meat compared with low and normal pH meat.Dynamic viscoelastic behavior showed that myosin denaturation temperature was independent of pH(24). Normal and high pH meat had similar hardness, springiness, and chewiness values as revealed by texture profile analysis. The results from this study indicate that high pH meat had similar or better functional properties than normal pH meat. Therefore, high pH meat is suitable for further processed products, whereas low pH meat may need additional treatment or ingredient formulations to improve its functionality.

Sector Economic Outlook. Energy

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-04-15

The energy sector is a key driver of the economic pillar of Vision 2030. As the economy grows, urbanization intensifies and incomes increase, corporate and household demand for energy also rises. To meet this growth in demand for energy, the sector needs to increase investments and diversify into more sources of energy such as geothermal and wind power. It is therefore critical that focus is directed towards development and sustainability of the energy sector to ensure delivery of least cost power that will improve Kenya's competitiveness and achieve the Vision 2030 objective of 10% average annual economic growth.

Experimental study on buckling and ultimate strength of thin-walled box stub columns; Usuniku hakogata danmen buzai no zakutsu / shukyoku kyodo tokusei ni kansuru jikkenteki kenkyu

Energy Technology Data Exchange (ETDEWEB)

Nakai, H.; Kitada, T. [Osaka City Univ. (Japan); Oryu, T. [Kawasaki Heavy Industries Ltd., Kobe (Japan)

1998-10-21

Thin-walled box stub columns such as beams of cable-stayed bridge, suspension bridge tower, arch rib of arch bridge and steel piers and so forth can also bear torsion at the same time besides compression and bending. These thin-walled box stub columns may achieve ultimate condition before reaching to plastic condition due to the effect of local buckling and so forth. Accordingly, it is the important topic to study the properties regarding ultimate strength of thin-walled box members in order to evaluate correctly the effect on load bearing resistance of local buckling. In this report, validity of load bearing resistance curve and ultimate strength interaction curve proposed by authors was studied using load bearing capacity experiment results. As a result, all ultimate strengths obtained by the experiment were higher than the ultimate strengths estimated by load bearing capacity curve and ultimate strength interaction curve. Further, it was revealed that the specimens subjected to torsion or subjected to bending and torsion and so forth exceeded the plastic strength due to the effect of strain hardening. 12 refs., 14 figs., 4 tabs.

INTERRELATIONSHIP S BETWEEN HEALTH, ENVIRONMENT QUALITY AND ECONOMIC ACTIVITY: WHAT CONSEQUENCES FOR ECONOMIC CONVERGENCE?

Directory of Open Access Journals (Sweden)

Alassane Drabo

2010-03-01

Full Text Available This paper examines the link between health indicators, environmental variables and economic development, and th e consequences of this relationship on economic convergence for a large sample of rich and poor countries. While in economic literature income and environment are seen to have an inverted-U shaped relationship (Environment Kuznets Curve hypothesis, it is also well established that an improvement in environmental quality is positively related to health. Our study focuses on the implications of this relationship for economic convergence. In the early stage of economic development, the gain from income growth could be cancelled or mitigated by environmental degradation through populations' health (and other channels and create a vicious circle in economic activity unlike in developed countries. This in turn could slow down economic convergence. To empirically assess these issues, we proceeded to an econometric analysis through three equations: a growth equation, a health equation and an environment equation. We found that health is a channel through which environment impacts economic growth. When we take into account the effect of environment quality on economic growth, the speed of convergence tends to increase slightly. This shows that environmental quality could be considered as a constraint for economic convergence.

Health care quality, access, cost, workforce, and surgical education: the ultimate perfect storm.

Science.gov (United States)

Schwartz, Marshall Z

2012-01-01

The discussions on health care reform over the past two years have focused on cost containment while trying to maintain quality of care. Focusing on just cost and quality unfortunately does not address other very important factors that impact on our health care delivery system. Availability of a well-trained workforce, maintaining the sophisticated medical/surgical education system, and ultimately access to quality care by the public are critical to maintaining and enhancing our health care delivery system. Unfortunately, all five of these components are under at risk. Thus, we have evolving the ultimate perfect storm affecting our health care delivery system. Although not ideal and given the uniqueness of our population and their expectations, our current delivery system is excellent compared to other countries. However, the cost of our current system is rising at an alarming rate. Currently, health care consumes 17% of our gross domestic product. If our system is not revised this will continue to rise and by 2025 it will consume 48%. The dilemma, given the current state of our overall economy and rising debt, is how to address this major problem. Unfortunately, the Affordable Care Act, which is now law, does not address most of the issues and the cost was initially grossly under estimated. Furthermore, the law does not address the issues of workforce, maintaining our medical education system or ultimately, access. A major revision of our system will be necessary to truly create a system that protects and enhances all five of the components of our health care delivery system. To effectively accomplish this will require addressing those issues that lead to wasteful spending and diversion of our health care dollars to profit instead of care. Improved and efficient delivery systems that reduce complications, reduction of duplication of tertiary and quaternary programs or services within the same markets (i.e. regionalization of care), health insurance reform, and

Socio-economic evaluation of selected biogas technologies

Energy Technology Data Exchange (ETDEWEB)

Moeller, F.; Martinsen, L.

2013-05-15

Financial and welfare economic analyses are conducted of 15 different biogas production scenarios that vary in terms of plant size and type of input. All considered scenarios lead to welfare economic losses. Overall welfare economic GHG reduction costs seem to increase with increasing crop/crop material share of input, and although the costs vary significantly across scenarios they are quite high for all scenarios. The financial analyses suggest that biogas production generally will be financially profitable for the agricultural sector and local CHP facilities but unprofitable for the biogas plants and the State. Seen from a policy perspective the results highlights the importance of designing regulatory instruments in a way that create incentives for private actors to engage in welfare economically desirable biogas production activities while discouraging the expansion of welfare economically undesirable activities. (Author)

Utilization of metal scrap for the production of waste drums for ultimate disposal

International Nuclear Information System (INIS)

Janberg, K.; Rittscher, D.

1988-01-01

The contribution reviews the history of development of the techniques for treatment of decommissioning scrap from the beginning of the 1980's onwards (decommissioning of the Niederaichbach and Gundremmingen nuclear power stations), together with the radiological measuring methods required for regulatory purposes. The advantages of the recycling of the metal scrap by means of melting, and of materials utilization for production of waste containers for ultimate storage are discussed together with product quality assurance criteria. (RB) [de

Ultimate internal pressure capacity of a reinforced concrete Mark III containment

International Nuclear Information System (INIS)

McGaughy, J.P. Jr.; Lin, F.T.; Sen, S.K.

1983-01-01

The static ultimate capacity of a Mark III BWR pressure suppression type containment has been investigated with a view to determine its capability to withstand the internal pressure associated with a postulated hydrogen burn. The reinforced concrete containment consists of a right circular cylinder covered by a hemispherical dome and supported on a flat circular foundation mat. A 1/4'' thick welded steel liner plate covers the inside surface of the containment shell. The cylinder is a 3.5 ft. thick shell with an inside radius of 62.0 feet. The thickness of the dome is 3.5 feet. Reinforcement in the shell is comprised of multi-layers of circumferential, meridional and diagonal rebars. Major containment penetrations consists of a circular equipment hatch and two personnel airlock assemblies. The containment ultimate capacity is determined by performing a non-linear analysis using the proprietary finite element computer code 'FINEL'. The code has the capability of modelling concrete cracking in tension and redistribution forces and moments to account for such phenomenon. For analysis purposes, the finite element model included the containment dome and the upper portion of the containment cylinder with appropriate boundary conditions applied at the model cut off region. This portion of the containment structure is selected because the segment of the cylinder that is included in the model has the least amount of hopp reinforcement, and when the general yield state is reached, the hoop reinforcement will be the limiting element. The containment structure has been treated as an axisymmetric shell using axisymmetric quadrilateral finite elements in the radial plane to model the liner plate and concrete. The reinforcing steel have been idealized by finite elements with unidirectional stiffness. (orig./RW)

Increase in socio-economic value of the fresh water fishery by reductions in the sulfur precipitation. [Norway]. Oekt samfunnsoekonomisk verdi av ferskvannsfisket ved reduksjoner i svovelnedfallet

Energy Technology Data Exchange (ETDEWEB)

Navrud, S

1985-01-29

A reduction of about 30% in the sulfur out-lets in Europe would lead to approximately the same reduction in acid precipitation in the South of Norway. The resulting improvement of water quality would facilitate improvements in the fish population. The report discussed various methods of measuring the socio-economic value of an assumed marginal increase of the amount of fresh water fish and recommends a ''parcel of methods'' in order to solve the estimation problem. A reduction of 30% in the acid precipitation would result in a total yearly socio-economic value increase of approximately 37 millions Norwegian kroners measured by the total willingness of payment by the Norwegian population - wich probably is an underestimation. 66 references, 22 drawings, 5 tables.

Ethical Implications in the Socio-Economical Life

OpenAIRE

Ion Hirghiduş

2009-01-01

Concern for the morality of economic life is relatively recent and involves the need to implement ethical codes that prevent violation of rules of conduct. The Socio-economical sphere is marked by profound transformations that shape a particular kind of rationality. The ethical rules can also be found under this kind of rationality. Apparently these rules hinder the economical processes, but in reality respecting the economical rule, leads to the increase of trust between economical actors. H...

INNOVATION ASPECTS OF THE ECONOMIC DEVELOPMENT

Directory of Open Access Journals (Sweden)

M. Veselovsky

2016-01-01

Full Text Available In the article the problems of economic increase and development under the conditions for the growth of crisis phenomena in the economy of Russia is investigated. Are analyzed the factors, which infl uence economic of the development of state and guarantee of its steady increase. Is examined the integral approach in conducting of economic reforms, which is based to the use of innovation developments and new forms of management of control. They are given to recommendation regarding conducting of the necessary reforms in the systems of management, planning, of organizing of labor, of circulation of money and crediting, taxation and other systems, which have the direct and defi ned by example eff ect on economic development. Is emphasized that for steady economic development is, in the first place, necessary further integration of Russia in the world community, the adjusting of mutually benefi cial intergovermental connections, the exchange, by scientific, technical and economic information, the free motion of labor and capital.Purposes / tasks. The purpose of article is a study of the factors of influencing the economic development in build-up conditions crisis phenomena and the development of the proposals, which ensure economic increase and development.Article tasks: to investigate and to isolate the growth factors, under the conditions of the being deteriorated economic situation, which is expedient to use with the solution of the problem of economic development, the application of innovation developments and new forms of management of control.Methodology. With conducting of the present investigation by the basic sources of initial data served the materials of the state statistics and other information sources. The comparative methods of analysis and synthesis are assumed as the basis of systematic developments.Results. The need for the complex conducting of economic reforms is revealed. The influence of new technologies on the development of

Ultimate compression after impact load prediction in graphite/epoxy coupons using neural network and multivariate statistical analyses

Science.gov (United States)

Gregoire, Alexandre David

2011-07-01

The goal of this research was to accurately predict the ultimate compressive load of impact damaged graphite/epoxy coupons using a Kohonen self-organizing map (SOM) neural network and multivariate statistical regression analysis (MSRA). An optimized use of these data treatment tools allowed the generation of a simple, physically understandable equation that predicts the ultimate failure load of an impacted damaged coupon based uniquely on the acoustic emissions it emits at low proof loads. Acoustic emission (AE) data were collected using two 150 kHz resonant transducers which detected and recorded the AE activity given off during compression to failure of thirty-four impacted 24-ply bidirectional woven cloth laminate graphite/epoxy coupons. The AE quantification parameters duration, energy and amplitude for each AE hit were input to the Kohonen self-organizing map (SOM) neural network to accurately classify the material failure mechanisms present in the low proof load data. The number of failure mechanisms from the first 30% of the loading for twenty-four coupons were used to generate a linear prediction equation which yielded a worst case ultimate load prediction error of 16.17%, just outside of the +/-15% B-basis allowables, which was the goal for this research. Particular emphasis was placed upon the noise removal process which was largely responsible for the accuracy of the results.

Climate change and macro-economic cycles in pre-industrial europe.

Science.gov (United States)

Pei, Qing; Zhang, David D; Lee, Harry F; Li, Guodong

2014-01-01

Climate change has been proven to be the ultimate cause of social crisis in pre-industrial Europe at a large scale. However, detailed analyses on climate change and macro-economic cycles in the pre-industrial era remain lacking, especially within different temporal scales. Therefore, fine-grained, paleo-climate, and economic data were employed with statistical methods to quantitatively assess the relations between climate change and agrarian economy in Europe during AD 1500 to 1800. In the study, the Butterworth filter was adopted to filter the data series into a long-term trend (low-frequency) and short-term fluctuations (high-frequency). Granger Causality Analysis was conducted to scrutinize the associations between climate change and macro-economic cycle at different frequency bands. Based on quantitative results, climate change can only show significant effects on the macro-economic cycle within the long-term. In terms of the short-term effects, society can relieve the influences from climate variations by social adaptation methods and self-adjustment mechanism. On a large spatial scale, temperature holds higher importance for the European agrarian economy than precipitation. By examining the supply-demand mechanism in the grain market, population during the study period acted as the producer in the long term, whereas as the consumer in the short term. These findings merely reflect the general interactions between climate change and macro-economic cycles at the large spatial region with a long-term study period. The findings neither illustrate individual incidents that can temporarily distort the agrarian economy nor explain some specific cases. In the study, the scale thinking in the analysis is raised as an essential methodological issue for the first time to interpret the associations between climatic impact and macro-economy in the past agrarian society within different temporal scales.

Regions’ Economic Autonomy in the New Reality

Directory of Open Access Journals (Sweden)

Vladimir Stepanovich Bochko

2016-06-01

Full Text Available The paper discloses the understanding of new reality (normality for Russia that consists in the strengthening of the role of a man-personality and in the expansion of the economic autonomy of the territories in their interaction with the federal center. The rationale is based on a hypothesis according to which in the conditions of new reality, the increase of the well-being of the population and the overcoming of economic inequality between the territories are provided by the expansion of their economic independence as it leads to the increase of their intellectual, engineering and manufacturing potential. In the research, the author used the basic concepts of the classical economic theory, the theory of behavioural economics, interdisciplinary approach and statistical grouping method. The dynamics of the economic independence of the territories, which is manifested in the decrease in a number of donor regions and the socio-economic dividing of the territories, is shown. The assumption is proved that the consequences of the territorial stratification are the restraining of the growth of their socio-economic development and possibility probable emergence of «regional peripheral economy» with the property of the dependence of the periphery on the center, the decrease in a local initiative, the inhibition of technological development. The need to use the social psychology of the population, the psychological sets of economic development, «the second invisible hand of the market» and soft power to overcome the «regional peripheral economy» is revealed. The result of the research is the proof that the expansion of the economic independence of the territories is not only the increase of the self-isolation of regions and municipalities, but also the need to save the considerable part of the income from the production of goods and services created by the local population under control of the regional and municipal authorities and direct it to the

Secondary Moments due to Prestressing with Different Bond at the Ultimate Limit State

Directory of Open Access Journals (Sweden)

Halvoník Jaroslav

2018-03-01

Full Text Available Secondary effects of prestressing develop in statically indeterminate structures (e.g., continuous beams due to the restraint of deformations imposed by hyperstatic restraints. These effects may significantly influence internal forces and stresses in prestressed structures. Secondary effects are influenced by the redundancy of a structural system, which raises the question of whether they will remain constant after a change in the structural system, e.g., due to the development of plastic hinge(s in a critical cross-section(s or after the development of a kinematic mechanism, or if they will disappear when the structure changes into a sequence of simply supported beams. The paper deals with an investigation of the behavior of continuous post-tensioned beams subjected to an ultimate load with significant secondary effects from prestressing. A total of 6 two-span beams prestressed by tendons with different bonds were tested in a laboratory with a load that changed their structural system into a kinematic mechanism. The internal forces and secondary effects of the prestressing were controlled through measurements of the reactions in all the supports. The results revealed that the secondary effects remained as a permanent part of the action on the experimental beams, even after the development of the kinematic mechanism. The results obtained confirmed that secondary effects should be included in all combinations of actions for verifications of ultimate limit states (ULS.

Secondary Moments due to Prestressing with Different Bond at the Ultimate Limit State

Science.gov (United States)

Halvoník, Jaroslav; Pažma, Peter; Vida, Radoslav

2018-03-01

Secondary effects of prestressing develop in statically indeterminate structures (e.g., continuous beams) due to the restraint of deformations imposed by hyperstatic restraints. These effects may significantly influence internal forces and stresses in prestressed structures. Secondary effects are influenced by the redundancy of a structural system, which raises the question of whether they will remain constant after a change in the structural system, e.g., due to the development of plastic hinge(s) in a critical cross-section(s) or after the development of a kinematic mechanism, or if they will disappear when the structure changes into a sequence of simply supported beams. The paper deals with an investigation of the behavior of continuous post-tensioned beams subjected to an ultimate load with significant secondary effects from prestressing. A total of 6 two-span beams prestressed by tendons with different bonds were tested in a laboratory with a load that changed their structural system into a kinematic mechanism. The internal forces and secondary effects of the prestressing were controlled through measurements of the reactions in all the supports. The results revealed that the secondary effects remained as a permanent part of the action on the experimental beams, even after the development of the kinematic mechanism. The results obtained confirmed that secondary effects should be included in all combinations of actions for verifications of ultimate limit states (ULS).

HOW TO SUSTAIN ECONOMIC PERFORMANCE? ECONOMIC GROWTH AND ITS IMPACT FACTORS

Directory of Open Access Journals (Sweden)

OANA SIMONA HUDEA (CARAMAN

2012-05-01

Full Text Available This paper intends to render several important factors of impact on economic growth and to describe the particular types of relationships of the latter with each one of its influencing elements. In order to correctly determine such issue, we have resorted to three carefully selected models that have been estimated and compared so as to identify the most adequate and representative regression. For this purpose we have performed an analysis based on cross-section annual data for 105 countries spread all over the world. After having tested and rejected certain exogenous variables initially considered, such as imports or exports, we have finally retained the external debt and foreign direct investments as explanatory items of the dependent variable. The results revealed that both of them positively affect the gross domestic product of the analysed countries, this one being inelastic in relation to the exogenous variables considered. Even if the relationship between the economic growth and the external debt of a country is usually negative, as the money exit out of the country due to the debt service causes non-achieved potential investments, yet, there is an inflexion point up to which the external debt has a positive influence on economic growth by the increase of the investments funds acquired as result of the external credit contracting, this being the case reflected by our study. As for the relationship existing between foreign direct investments and GDP, the economic theory confirms that FDI and economic growth are directly correlated, the former contributing to technical progress, production increase and, finally, to the improvement of the living standard.

Spatiotemporal Assessment of PM2.5-Related Economic Losses from Health Impacts during 2014–2016 in China

Directory of Open Access Journals (Sweden)

Yang Yang

2018-06-01

Full Text Available Background: Particulate air pollution, especially PM2.5, is highly correlated with various adverse health impacts and, ultimately, economic losses for society, however, few studies have undertaken a spatiotemporal assessment of PM2.5-related economic losses from health impacts covering all of the main cities in China. Methods: PM2.5 concentration data were retrieved for 190 Chinese cities for the period 2014–2016. We used a log-linear exposure–response model and monetary valuation methods, such as value of a statistical life (VSL, amended human capital (AHC, and cost of illness to evaluate PM2.5-related economic losses from health impacts at the city level. In addition, Monte Carlo simulation was used to analyze uncertainty. Results: The average economic loss was 0.3% (AHC to 1% (VSL of the total gross domestic product (GDP of 190 Chinese cities from 2014 to 2016. Overall, China experienced a downward trend in total economic losses over the three-year period, but the Beijing–Tianjin–Hebei, Shandong Peninsula, Yangtze River Delta, and Chengdu-Chongqing regions experienced greater annual economic losses. Conclusions: Exploration of spatiotemporal variations in PM2.5-related economic losses from long-term health impacts could provide new information for policymakers regarding priority areas for PM2.5 pollution prevention and control in China.

Increasing the complexity of a refinery: a analysis of the economic impacts of the introduction of new process in refineries; O aumento da complexidade de uma refinaria: uma analise dos impactos economicos da introducao de novos processos em refinarias

Energy Technology Data Exchange (ETDEWEB)

Fontes, Cristiane M; Seidl, Peter R [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Escola de Quimica

2008-07-01

The importance of the refining segment in the oil productive chain turns decision making on production and investment to be made at refineries dependent upon general context of the oil industry. Several technical and economic factors limit the possibilities to be foreseen by the managers. The ultimate goal of a refinery is to meet market demand in a region. Moreover, the type of processed oil and refining techniques will shape the profile of the production of derivatives. In a segment dynamic and full of uncertainties, such as refining, where the type of oil supplied to processing, specifications of products, and their demands, changes in the course of time, how to keep refining margins acceptable? This paper presents the relationship between the characteristics and the use of different kinds of oil, the characteristics of the national market of derivatives, and some characteristics of the refining processes considered in the study. The possible economic impacts that the introduction of different processes can bring to a refinery are analysed and alternatives for expansion are evaluated. To achieve these goals, a methodology for analysis considering the yield of Marlin oil refining for different schemes has been developed. (author)

ECONOMIC MECHANISMS OF POPULATION PROTECTION AGAINST PENSION RISKS AS A TOOL FOR SOCIO-ECONOMIC DEVELOPMENT OF THE REGION

Directory of Open Access Journals (Sweden)

Lyubov V. Grigoryeva

2017-06-01

Full Text Available The problem of finding effective economic instruments for socio-economic development of the regions has recently become of increasing relevance. Strengthening the regional differentiation, highlighting the leading and lagging regions, the lack of own resources in the regions has forced regional authorities to use new instruments of territorial development, in particular, economic mechanisms of protection against pension risks. The use of these mechanisms has a dual effect (economic and social, due to the attraction of the regions with additional financial resources in the form of “long money” and increasing the protection of citizens against pension risks (the increase in the level of pension payments. The analysis of the current use of economic mechanisms of protection against pension risks in the regions of the Southern Federal District helped to articulate key issues of their use, in particular, low pension literacy of the population, distrust towards specialized financial institutions, the investment policy of the regions does not take into account the possibility of attracting private pension funds into regional projects, and there is no mechanism to support regional National Pension Fund. Territorial analysis revealed the potential application of economic mechanisms to protect against pension risks in the regions of the Southern Federal District as a tool for socio-economic development, which is based on the existence of regional pension funds and insurance companies (providing services for pension insurance, as well as participation in private pension provision. The Krasnodar, Rostov and Volgograd regions have the highest potential among the regions of the Southern Federal District, as there already exist regional National Pension Fund, and the participation in private pension insurance is confirmed by the statistics of the contributions paid. The study of existing economic mechanisms to protect against pension risks will provide the

Health economic evaluation in Greece.

Science.gov (United States)

Rovithis, Dimitrios

2006-01-01

There is a growing volume of literature on health economic evaluation, with this form of analysis becoming increasingly influential at the decision-making level worldwide. The purpose of this study was to review the current state of health economic evaluation in Greece, with a view to uncovering reasons why its use in this country is limited. A search of the NHS Economic Evaluation Database was undertaken. The search included cost, cost-of-illness, cost-minimization, cost-effectiveness, cost-consequences, cost-utility, and cost-benefit analyses and was narrowed only to Greek authors undertaking solo or joint health economic evaluation in Greece. The search revealed that, in Greece, very little health economic evaluation has been undertaken. The main reason for the lack of interest is that the current chaotic healthcare system structure and financing does not provide the appropriate incentives to stimulate a powerful interest in this type of research. This condition is a result of the lack of a long-term national health policy and the hesitation of the present and past Greek governments to date to proceed to large-scale reforms because of political considerations. The Greek governments have also been content with the good health indicators being achieved. Even if it is accepted that good health prevails in Greece, slower economic growth rates, an ageing population, and the continuous immigration will place increasing pressure on healthcare resources and will necessitate a more rational use of these resources. Health economic evaluation, by weighing benefits against costs, therefore, has an important role to play.

Economic conditions, hypertension, and cardiovascular disease: analysis of the Icelandic economic collapse.

Science.gov (United States)

Birgisdóttir, Kristín Helga; Jónsson, Stefán Hrafn; Ásgeirsdóttir, Tinna Laufey

2017-12-01

Previous research has found a positive short-term relationship between the 2008 collapse and hypertension in Icelandic males. With Iceland's economy experiencing a phase of economic recovery, an opportunity to pursue a longer-term analysis of the collapse has emerged. Using data from a nationally representative sample, fixed-effect estimations and mediation analyses were performed to explore the relationship between the Icelandic economic collapse in 2008 and the longer-term impact on hypertension and cardiovascular health. A sensitivity analysis was carried out with pooled logit models estimated as well as an alternative dependent variable. Our attrition analysis revealed that results for cardiovascular diseases were affected by attrition, but not results from estimations on the relationship between the economic crisis and hypertension. When compared to the boom year 2007, our results point to an increased probability of Icelandic women having hypertension in the year 2012, when the Icelandic economy had recovered substantially from the economic collapse in 2008. This represents a deviation from pre-crisis trends, thus suggesting a true economic-recovery impact on hypertension.

Episodic foresight and anxiety: Proximate and ultimate perspectives.

Science.gov (United States)

Miloyan, Beyon; Bulley, Adam; Suddendorf, Thomas

2016-03-01

In this paper, we examine the relationship between episodic foresight and anxiety from an evolutionary perspective, proposing that together they confer an advantage for modifying present moment decision-making and behaviour in the light of potential future threats to fitness. We review the body of literature on the role of episodic foresight in anxiety, from both proximate and ultimate perspectives. We propose that anxious feelings associated with episodic simulation of possible threat-related future events serve to imbue these simulations with motivational currency. Episodic and semantic details of a future threat may be insufficient for motivating its avoidance, but anxiety associated with a simulation can provoke adaptive threat management. As such, we detail how anxiety triggered by a self-generated, threat-related future simulation prepares the individual to manage that threat (in terms of its likelihood and/or consequences) over greater temporal distances than observed in other animals. We then outline how anxiety subtypes may represent specific mechanisms for predicting and managing particular classes of fitness threats. This approach offers an inroad for understanding the nature of characteristic future thinking patterns in anxiety disorders and serves to illustrate the adaptive function of the mechanism from which clinical anxiety deviates. © 2015 The British Psychological Society.

Syllabus and Economics: Reasoning with Generation "Why"

Science.gov (United States)

Burdina, Mariya; Sasser, Sue Lynn

2018-01-01

In this article, the authors propose to enhance the syllabus for economic courses with economic explanations. They argue that providing economic rationale for course policies can increase student interest in the course and at the same time positively affect student attitude toward course policies. The authors describe practical strategies for…

Population, poverty and economic development.

Science.gov (United States)

Sinding, Steven W

2009-10-27

Economists, demographers and other social scientists have long debated the relationship between demographic change and economic outcomes. In recent years, general agreement has emerged to the effect that improving economic conditions for individuals generally lead to lower birth rates. But, there is much less agreement about the proposition that lower birth rates contribute to economic development and help individuals and families to escape from poverty. The paper examines recent evidence on this aspect of the debate, concludes that the burden of evidence now increasingly supports a positive conclusion, examines recent trends in demographic change and economic development and argues that the countries representing the last development frontier, those of Sub-Saharan Africa, would be well advised to incorporate policies and programmes to reduce high fertility in their economic development strategies.

The scaling of economic and performance parameters of DT and advanced fuel fusion reactors

International Nuclear Information System (INIS)

Roth, J.R.

1983-01-01

In this study, the plasma stability index beta and the fusion power density in the plasma were treated as independent variables to determine how they influenced three economic performance parameters of fusion reactors burning the DT and four advanced fusion fuel cycles. The economic/performance parameters included the total power produced per unit length of reactor; the mass per unit length, and the specific mass in kilograms/kilowatt. The scaling of these parameters with beta and fusion power density was examined for a common set of engineering assumptions on the allowable wall loading limits, the maximum magnetic field existing in the plasma, average blanket mass density, etc. It was found that the power per unit length decreased as the plasma power density and beta increased. This is a consequence of the fact that the first wall is a bottleneck in the energy flow from the plasma to the generating equipment, and the wall power flux will exceed wall loading limits if the plasma radius exceeds a critical value. If one wished to build an engineering test reactor which produced a burning plasma at the lowest possible initial cost, and without regard to whether such a reactor would ultimately produce the cheapest power, then one would minimize the mass per unit length. The mass per unit length decreases with increasing plasma power density and beta, with the DT reaction being the most expensive at a fixed plasma power density (because of its thicker blanket), and the least expensive at a fixed value of beta, at least up to values of beta of 50%. The specific mass, in kg/kw, which is a rough measure of the cost of the power generated by the reactor, shows an opposite trend. It increases with increasing plasma power density and beta. At a given plasma power density and low beta, the DT reaction gives the lowest specific mass, but at a fixed beta above 10%, the advanced fuel cycles have the lowest specific mass

INCREASED COMPETITIVENESS OF CONSTRUCTION ENTERPRISES ON THE BASIS OF ORGANISATIONAL-ECONOMIC DECISIONS OF PERSONNEL POTENTIAL MANAGEMENT

Directory of Open Access Journals (Sweden)

J. R. Emirbekova

2017-01-01

Full Text Available Objectives. The development of an algorithm for optimising the formation and use of human resources of a construction enterprise.Methods. The research basis consists in a generalised methodology  for personnel management, as well as specific methods for logical  and statistical analysis of management decision-making in  construction activities. The approaches, criteria, indicators and methods for assessing the effectiveness of human resource  management are studied alongside factors influencing the efficiency  resource potential management in a construction enterprise.Results. A quantitative methodology for the selection of qualified  staff for the implementation of construction projects is proposed.  The indicators of the effectiveness of the staff potential are  determined. Qualitative and quantitative data for the optimal  personnel formation for the construction project realisation are  systematised. An algorithm for optimising the personnel potential of  a construction enterprise is proposed. The use of this algorithm will  inform the choice of organisational and economic solutions for the  formation and effective use of qualified personnel at the expense of  combining professions, thereby reducing the cost and duration of construction work and increasing the resource efficiency and competitiveness of the construction enterprise.Conclusion. The labour potential of a construction enterprise can  significantly contribute to increased efficiency if it is used  appropriately and in an organised manner, using modern scientific  methods of management. Methods for building and organising the  activity of the personnel management system are proposed and a  mechanism for establishing relationships between the employer and employees that promote the most effective use of all types of resources for the development of the enterprise according to  strategic objectives is disclosed. The dominant role of the

Sewage sludge and wastewater fertilisation of Short Rotation Coppice (SRC) for increased bioenergy production - Biological and economic potential

International Nuclear Information System (INIS)

Dimitriou, I.; Rosenqvist, H.

2011-01-01

Application of municipal residues, e.g. wastewater or sewage sludge, to Short Rotation Coppice (SRC) is among the most attractive methods for attaining environmental and energy goals set for Europe. At current woodchip prices in Sweden, the gross margin for SRC cultivation is positive only if biomass production is >9 t DM/ha yr. The gross profit margin increases (by 39 and 199 EUR/GJ, respectively) if sewage sludge and wastewater are applied to SRC. Application of residues to SRC has proved to be an acceptable alternative treatment method, and the farmer's profit can be markedly increased if compensation is paid for waste treatment. If all available sludge and wastewater were applied to SRC plantations, they could be grown on large agricultural areas in Europe, and c. 6000 PJ of renewable energy could be produced annually. However, a more economical landuse strategy, e.g. the use of more P-rich residues, appears more rational, and is biologically justifiable. (author)

Sewage sludge and wastewater fertilisation of Short Rotation Coppice (SRC) for increased bioenergy production - Biological and economic potential

Energy Technology Data Exchange (ETDEWEB)

Dimitriou, I. [Department of Crop Production Ecology, Swedish University of Agricultural Sciences, P.O. Box 7043, SE 750 07 Uppsala (Sweden); Rosenqvist, H. [Department of Agriculture-Farming Systems, Technology and Product Quality, Swedish University of Agricultural Sciences, P.O. Box 17, SE-261 21 Billeberga (Sweden)

2011-02-15

Application of municipal residues, e.g. wastewater or sewage sludge, to Short Rotation Coppice (SRC) is among the most attractive methods for attaining environmental and energy goals set for Europe. At current woodchip prices in Sweden, the gross margin for SRC cultivation is positive only if biomass production is >9 t DM/ha yr. The gross profit margin increases (by 39 and 199 EUR/GJ, respectively) if sewage sludge and wastewater are applied to SRC. Application of residues to SRC has proved to be an acceptable alternative treatment method, and the farmer's profit can be markedly increased if compensation is paid for waste treatment. If all available sludge and wastewater were applied to SRC plantations, they could be grown on large agricultural areas in Europe, and c. 6000 PJ of renewable energy could be produced annually. However, a more economical landuse strategy, e.g. the use of more P-rich residues, appears more rational, and is biologically justifiable. (author)

Health, "illth," and economic growth: medicine, environment, and economics at the crossroads.

Science.gov (United States)

Egger, Garry

2009-07-01

Economic growth has been the single biggest contributor to population health since the Industrial Revolution. The growth paradigm, by definition, is dynamic, implying similar diminishing returns on investment at both the macro- and the micro-economic levels. Changes in patterns of health in developing countries, from predominantly microbial-related infectious diseases to lifestyle-related chronic diseases (e.g., obesity, type 2 diabetes) beyond a point of economic growth described as the epidemiologic transition, suggest the start of certain declining benefits from further investment in the growth model. These changes are reflected in slowing improvements in some health indices (e.g., mortality, infant mortality) and deterioration in others (e.g., disability-associated life years, obesity, chronic diseases). Adverse environmental consequences, such as climate change from economic development, are also related to disease outcomes through the development of inflammatory processes due to an immune reaction to new environmental and lifestyle-related inducers. Both increases in chronic disease and climate change can be seen as growth problems with a similar economic cause and potential economic and public health-rather than personal health-solutions. Some common approaches for dealing with both are discussed, with a plea for greater involvement by health scientists in the economic and environmental debates in order to deal effectively with issues like obesity and chronic disease.

Economic drivers of mineral supply

Science.gov (United States)

Wagner, Lorie A.; Sullivan, Daniel E.; Sznopek, John L.

2003-01-01

The debate over the adequacy of future supplies of mineral resources continues in light of the growing use of mineral-based materials in the United States. According to the U.S. Geological Survey, the quantity of new materials utilized each year has dramatically increased from 161 million tons2 in 1900 to 3.2 billion tons in 2000. Of all the materials used during the 20th century in the United States, more than half were used in the last 25 years. With the Earth?s endowment of natural resources remaining constant, and increased demand for resources, economic theory states that as depletion approaches, prices rise. This study shows that many economic drivers (conditions that create an economic incentive for producers to act in a particular way) such as the impact of globalization, technological improvements, productivity increases, and efficient materials usage are at work simultaneously to impact minerals markets and supply. As a result of these economic drivers, the historical price trend of mineral prices3 in constant dollars has declined as demand has risen. When price is measured by the cost in human effort, the price trend also has been almost steadily downward. Although the United States economy continues its increasing mineral consumption trend, the supply of minerals has been able to keep pace. This study shows that in general supply has grown faster than demand, causing a declining trend in mineral prices.

Economic benefits of productivity increases through truck-to-rail mode shift in freight transport.

Science.gov (United States)

2016-01-29

Although the study of economic benefits of improving (or not improving) the efficiency of freight movement has been recognized as one of the critical research topic by the decision makers and researchers alike, there remains a dearth of transparent a...

Increasing Public Expenditure

Directory of Open Access Journals (Sweden)

Ammar Ben Zaed

2017-04-01

Full Text Available This article aims to analyze and interpret the phenomenon of increased public expenditures and test explanatory theories as well as to analyze Abstract the relationship between public spending and GDP in the short and long term where you see the Wagner hypothesis that causal heading of GDP to government spending while there is a causal relationship analysis positive trending of government spending to GDP according to the Keynesian hypothesis in this study will be used descriptive analytical method to validate these hypotheses. Results in the short and long term made it clear that there is a difference in the outcome of Applied Studies where we find that each supports a relationship Wagner in the sense that the causal trending of real GDP to government spending and more precisely to increase the economic growth lead to increased aggregate demand which leads in turn increasing the need to increase government spending and to increase the resources available to the government sector to finance the increase in spending by the additional resources resulting from the economic growth while others opines opposes the existence of the relationship.

The economic burden of kidney disorders in Korea.

Science.gov (United States)

Kim, Ju Hee; Ho, Seung Hee; Kim, Hyun-Jin; Lee, Sol

2018-03-01

To estimate the economic burden of kidney disorders in Korea. The economic burden of kidney disorders was estimated using a prevalence-based approach. Related kidney diseases in patients with kidney disorders (RPWKD) were defined using codes from the tenth International Classification of Disease (E70-E90, F30-F48, F60-F69, F90-F99, K65-K67, N00-N08, N17-N19, and N30-N39). All diseases in patients with kidney disorders (APWKD) were defined as kidney disorders that involved all disease codes. Economic costs were divided into direct costs (medical costs and non-medical costs) and indirect costs (productivity loss because of morbidity and premature mortality). The prevalence of kidney disorders increased from 0.08% (2008) to 0.11% (2011). The total economic burden of RPWKD also substantially increased from $898.9 million (2008) to $1.43 billion (2011). This ∼59.4% increase in the economic burden was equal to 0.12% of the Korean gross domestic product. The economic burden of APWKD also increased during the study period: $1.06 billion (2008), $1.23 billion (2009), $1.44 billion (2010), and $1.46 billion (2011). The present study provides the first data regarding the economic burden of kidney disorders in Korea. The findings support the need for early intervention services and prevention programs to prevent, identify, and manage kidney disorders.

The Economic Crisis and Sustainable Development

DEFF Research Database (Denmark)

Lund, Henrik; Hvelplund, Frede

of sustainable energy solutions involves the replacement of imported fossil fuels by substantial investments in energy conservation and renewable energy. In such situation, it becomes increasingly essential to develop economic thinking and economic models that can analyse the concrete institutions in which......This paper presents Concrete Institutional Economics as an economic paradigm to understand how the wish for sustainable energy in times of economic crisis can be used to generate jobs as well as economic growth. In most countries, including European countries, the USA and China, the implementation...... the market is embedded. This paper presents such tools and methodologies and applies them to the case of the Danish heating sector. The case shows how investments in decreasing fossil fuels and CO2 emissions can be made in a way in which they have a positive influence on job creation and economic development...

Ultimate Pressure Capacity of Prestressed Concrete Containment Vessels with Steel Fibers

Energy Technology Data Exchange (ETDEWEB)

Hahm, Dae Gi; Choun, Young Sun; Choi, In Kil [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2011-10-15

The ultimate pressure capacity (UPC) of the prestressed concrete containment vessel (PCCV) is very important since the PCCV are final protection to prevent the massive leakage of a radioactive contaminant caused by the severe accident of nuclear power plants (NPPs). The tensile behavior of a concrete is an important factor which influence to the UPC of PCCVs. Hence, nowadays, it is interested that the application of the steel fiber to the PCCVs since that the concrete with steel fiber shows an improved performance in the tensile behavior compared to reinforced concrete (RC). In this study, we performed the UPC analysis of PCCVs with steel fibers corresponding to the different volume ratio of fibers to verify the effectiveness of steel fibers on PCCVs

Getting Risks Right:Thoughts about Increasing the Resilience of the Global Social & Economic System

Directory of Open Access Journals (Sweden)

Patrick Liedtke

2012-04-01

Full Text Available The extraordinary extent of the financial crisis has inspired deep systemic reforms world-wide, rethinking financial stability, the resilience of our economic systems, and the role that national and international institutions play. While most of the ongoing activities are understandably centred on banks and the banking sector – the origin and centre of the crisis – other important elements have been relegated into secondary roles and fundamental democratic processes have been sidelined. Financial issues have crowded out real economic issues as policy-makers and politicians spend more time on the financial than the substantial (i.e. the real economy and the democratic. Two fundamental concerns need to be addressed proactively: 1. A comprehensive approach to deal with both financial and real world risks on this planet, and 2. The global governance system based on democratic principles to follow globalisation of the business (and particularly the financial sector.

Plasticity and constraints on social evolution in African mole-rats: ultimate and proximate factors.

Science.gov (United States)

Faulkes, Chris G; Bennett, Nigel C

2013-05-19

Here, we review comparative studies of African mole-rats (family Bathyergidae) to explain how constraints acting at the ultimate (environmental) and proximate (organismal) levels have led to convergent gains and losses of sociality within this extensive adaptive radiation of subterranean rodents endemic to sub-Saharan Africa. At the ultimate level, living in environments that range from mesic through to arid has led to both variation and flexibility in social organization among species, culminating in the pinnacle of social evolution in the eusocial naked and Damaraland mole-rats (Heterocephalus glaber and Fukomys damarensis). The common mole-rat (Cryptomys hottentotus) provides a model example of how plasticity in social traits exists within a single species inhabiting areas with different ecological constraint. At the proximate level, reproductive strategies and cooperative breeding may be constrained by the correlated evolution of a suite of traits including physiological suppression of reproduction, the development of physiological and morphological castes, and the mode of ovulatory control and seasonality in breeding. Furthermore, recent neurobiological advances indicate that differential patterns of neurotransmitter expression within the forebrain may underpin (and limit) either a solitary or group living/cooperative lifestyle not only in mole-rats, but also more widely among disparate mammalian taxa.

Evaluation of the ultimate pressure capacity of rectangular HVAC ducts for nuclear pwoer plants

International Nuclear Information System (INIS)

Wedellsborg, B.W.

1984-01-01

Typical Category I HVAC ducts in a nuclear plant must be designed for loads and load combinations including positive and negative pressure loads which are generated due to the normal operation and postulated accident conditions. These pressure loads most often govern the design of the HVAC ducts. Structural design criteria are presently based on the AISI Code which limits the duct panel width-to-thickness ratio to a maximum of 500 and the maximum height-to-thickness ratio to 200, unless it can be shown by structural tests that larger ratios can be used. Test Programs performed on rectangular HVAC ducts subjected to vacumm loads have substantiated the use of ducts having panel width to thickness ratios of up to 1600. The results of the test programs were subsequently incorporated into the design through a more rational analytical design method which was developed from and correlates well with the test results. The purpose of this paper is to present the analytical design method and its correlation with the test results. Simple formulae for the design of rectangular HVAC ducts are presented. Lower bound values of duct sheet, and stiffener ultimate loads are derived, and correlated with recent test results. Analytically predicted ultimate pressures are also compared with other available duct test data

Economic effects on taxing CO2 emissions

International Nuclear Information System (INIS)

Haaparanta, P.; Jerkkola, J.; Pohjola, J.

1996-01-01

The CO 2 emissions can be reduced by using economic instruments, like carbon tax. This project included two specific questions related to CO 2 taxation. First one was the economic effects of increasing CO 2 tax and decreasing other taxes. Second was the economic adjustment costs of reducing net emissions instead of gross emissions. A computable general equilibrium (CGE) model was used in this analysis. The study was taken place in Helsinki School of Economics

Why Energy is AN Economic Planetary Emergency

Science.gov (United States)

Difiglio, Carmine

2014-07-01

This paper analyzes why high and volatile oil prices cause reduced world-wide economic growth. Disruptions in the petroleum market, due to unexpected economic growth or reduced petroleum supplies, have been shown to cause sharp increases in petroleum prices as a result of the inflexibilities of petroleum supply and demand. An examination of over 40 years of data reveals that oil price shocks are invariably followed by 2-3 years of weak economic growth and weak economic growth is almost always preceded by an oil price shock. While the statistical literature provides evidence that economies have become less vulnerable to a given oil price increase than they were during the 1970s, it also shows that the elasticity of demand for oil has significantly decreased. The increased resiliency of economies to higher oil prices has been partially or fully offset by the increased sensitivity of oil prices to any oil market perturbation. This paper also reviews the current state of oil-supply security noting that previous episodes of supply instability appear to have become chronic conditions. While new unconventional oil production technologies have revitalized North American oil production, it is concluded that these technologies will have only a modest effect on world-wide oil production. The marginal cost of oil production, whether from tight-oil plays, or other unconventional sources, is expected to increase contributing to rising longterm oil prices in an international oil market that will remain vulnerable to disruptions and sharp price increases. Recurring episodes of poor world-wide economic growth are shown to affect hundreds of millions of people though unemployment in the modern economy and, in developing countries, though slower emigration out of agricultural-sector poverty. It is also noted that world-wide greenhouse gas emissions require strong national policies. Clean-energy policies are more likely to be pursued by countries enjoying strong economic growth than

Asia-Pacific Economic Update, 2012. Volume 3

Science.gov (United States)

2012-09-01

starred each other down at Scarborough Reef . More damaging, China began to deny entry to Philippine bananas that reached Chinese ports claiming...and banana industries continue to suffer as a result of the standoff at Scarborough Reef . Theoretically, the two nations will ultimately reconcile...case mainly because the 2012 acceleration in exports to the US reflects large increases in exports of vehicles and in turbines for nuclear power plants

An economic evaluation of solar radiation management

Energy Technology Data Exchange (ETDEWEB)

Aaheim, Asbjørn; Romstad, Bård; Wei, Taoyuan [CICERO — Center for International Climate and Environmental Research Oslo (Norway); Kristjánsson, Jón Egill; Muri, Helene [Department of Geosciences, University of Oslo (Norway); Niemeier, Ulrike; Schmidt, Hauke [Max Planck Institute for Meteorology, Hamburg (Germany)

2015-11-01

Economic evaluations of solar radiation management (SRM) usually assume that the temperature will be stabilized, with no economic impacts of climate change, but with possible side-effects. We know from experiments with climate models, however, that unlike emission control the spatial and temporal distributions of temperature, precipitation and wind conditions will change. Hence, SRM may have economic consequences under a stabilization of global mean temperature even if side-effects other than those related to the climatic responses are disregarded. This paper addresses the economic impacts of implementing two SRM technologies; stratospheric sulfur injection and marine cloud brightening. By the use of a computable general equilibrium model, we estimate the economic impacts of climatic responses based on the results from two earth system models, MPI-ESM and NorESM. We find that under a moderately increasing greenhouse-gas concentration path, RCP4.5, the economic benefits of implementing climate engineering are small, and may become negative. Global GDP increases in three of the four experiments and all experiments include regions where the benefits from climate engineering are negative.

An economic evaluation of solar radiation management

International Nuclear Information System (INIS)

Aaheim, Asbjørn; Romstad, Bård; Wei, Taoyuan; Kristjánsson, Jón Egill; Muri, Helene; Niemeier, Ulrike; Schmidt, Hauke

2015-01-01

Economic evaluations of solar radiation management (SRM) usually assume that the temperature will be stabilized, with no economic impacts of climate change, but with possible side-effects. We know from experiments with climate models, however, that unlike emission control the spatial and temporal distributions of temperature, precipitation and wind conditions will change. Hence, SRM may have economic consequences under a stabilization of global mean temperature even if side-effects other than those related to the climatic responses are disregarded. This paper addresses the economic impacts of implementing two SRM technologies; stratospheric sulfur injection and marine cloud brightening. By the use of a computable general equilibrium model, we estimate the economic impacts of climatic responses based on the results from two earth system models, MPI-ESM and NorESM. We find that under a moderately increasing greenhouse-gas concentration path, RCP4.5, the economic benefits of implementing climate engineering are small, and may become negative. Global GDP increases in three of the four experiments and all experiments include regions where the benefits from climate engineering are negative

Analysis of Fiji’s Export and Its Impact on Economic Growth

Directory of Open Access Journals (Sweden)

Shivneil Kumar Raj

2017-05-01

Full Text Available Exports are vital for Fiji’s economy as it contributes significantly to its gross domestic product (GDP and economic growth. The export data over the years show very slow growth and is gradually increasing. Fiji’s GDP data show that GDP is gradually increasing. Thus, Fiji’s economic growth is also increasing at a steady rate. This study aims to measure the relationship between exports and economic growth in Fiji. A regression analysis on data collected for Fiji from 2000-2015 shows that there is a strong positive relationship between exports and economic growth. Thus, when exports increase, economic growth also increases. Potential sectors that can be further developed to boost Fiji’s exports are sugar, garment, tourism and agriculture. The government should restrict imports through import quotas, tariffs and embargoes and give subsidies and tax incentives to potential export sectors to boost domestic production and increase exports. The government’s motive is to increase export incentives and promote Fiji made products both locally and overseas. Thus, this leads to an increase in exports, improves the trade balance and economic growth. This research article was undertaken to carry out research to investigate the link between Fiji’s export and economic growth and highlight ways and potential sectors to increase Fiji’s export and reduce imports.

Energy consumption and economic development

International Nuclear Information System (INIS)

Tremblay, M.T.

1994-01-01

Speaking as an economic planner, the author of this address suggests a scenario that is rather pessimistic for the future of nuclear energy. He emphasizes that technological change will lead to economic growth, but then supposes that improvements in hydrogen energy and solar energy, combined with global competition, may lead to a fall rather than an increase in oil prices early in the next century. The 10 year lead time for bringing a nuclear station from design to commissioning makes it difficult to predict the economics of operation

The Decomposition Analysis of CO2 Emission and Economic Growth in Pakistan India and China

Directory of Open Access Journals (Sweden)

Muhammad Irfan Javaid Attari

2011-12-01

Full Text Available The conflict between economic growth and keeping greenhouse gases (GHG at controllable levels is one of the ultimate challenges of this century. The aim of Kyoto Protocol is to keep the level of carbon dioxide (CO2 below a certain threshold level. The purpose of this paper is to study the effect of CO2 emission on economic growth by conducting the regional analysis of PIC nations i.e. Pakistan, India and China. The study also provides the detail information regarding the atmospheric emission by applying decomposition analysis. It is suggested that environmental policies need more attention in the region by keeping the differences aside. So, the emission trading is considered to be the new concept. The approach should be introduced to tackle down the global warming in the region. Now it is time to respond because the low Carbon Economy is the reality.

Economic viability of Stratified Medicine concepts: An investor perspective on drivers and conditions that favour using Stratified Medicine approaches in a cost-contained healthcare environment.

Science.gov (United States)

Fugel, Hans-Joerg; Nuijten, Mark; Postma, Maarten

2016-12-25

Stratified Medicine (SM) is becoming a natural result of advances in biomedical science and a promising path for the innovation-based biopharmaceutical industry to create new investment opportunities. While the use of biomarkers to improve R&D efficiency and productivity is very much acknowledged by industry, much work remains to be done to understand the drivers and conditions that favour using a stratified approach to create economically viable products and to justify the investment in SM interventions as a stratification option. In this paper we apply a decision analytical methodology to address the economic attractiveness of different SM development options in a cost-contained healthcare environment. For this purpose, a hypothetical business case in the oncology market has been developed considering four feasible development scenarios. The article outlines the effects of development time and time to peak sales as key economic value drivers influencing profitability of SM interventions under specific conditions. If regulatory and reimbursement challenges can be solved, decreasing development time and enhancing early market penetration would most directly improve the economic attractiveness of SM interventions. Appropriate tailoring of highly differentiated patient subgroups is the prerequisite to leverage potential efficiency gains in the R&D process. Also, offering a better targeted and hence ultimately more cost-effective therapy at reimbursable prices will facilitate time to market access and allow increasing market share gains within the targeted populations. Copyright © 2016 Elsevier B.V. All rights reserved.

Dual characteristics of yield and ultimate strength as applied to two grades of beryllium

International Nuclear Information System (INIS)

Priddy, T.G.; Benzley, S.E.; Johnson, R.L.

1977-02-01

Published yield and ultimate biaxial strength data for two grades of beryllium are correlated with the use of a macroscopic failure model. Cross sections of the resulting surfaces in three-dimensional stress space are drawn to illustrate the expected transition from ductile to brittle fracture for triaxial tension states of stress. The usefulness of these models to the prediction of fracture in ductile materials is discussed. 5 tables, 8 figures, 11 references

The in vitro digestibility of beef varies with its inherent ultimate pH.

Science.gov (United States)

Farouk, Mustafa M; Wu, Guojie; Frost, Deborah A; Clerens, Stefan; Knowles, Scott O

2014-11-01

Animal carcasses and cuts of meat are usually differentiated and valued according to size and compositional attributes. An underappreciated variable of red meat is its inherent ultimate pH (pHu) value, which affects organoleptic and processing characteristics. This study tests the hypothesis that high pHu aged meat would be more digestible than low pHu unaged (fresh) meat. Longissimus dorsi muscles collected from 59 bull carcasses had pHu values of 5.6-6.9. These were aged for 21 days at -1.5 °C, then raw and cooked (72 °C) samples were enzymatically digested at 37 °C with pepsin (pH 1.9 for 90 min) followed by pancreatin (pH 8.0 for an additional 120 min) to simulate conditions in the stomach and small intestine, respectively. Meat proteins and peptides in the digests were separated by 1D SDS PAGE. Regardless of pHu, ageing or cooking, most sarcoplasmic and myofibrillar proteins were rapidly digested by pepsin, with concomitant release of products identified by LC-MS/MS as mainly myosin-1, -2 and -7, α-actinin-2 or -3 and tropomyosin beta and alpha chains. These products were resistant to further digestion for the entire 210 min duration of the incubation. In terms of rate and extent of digestibility of these resistant products, high pHu > low pHu (P unaged (P meat samples increased with increasing pHu (P meat was highly digestible but could be further differentiated on the basis of its pHu and the ease of digestibility of proteins. Specific carcasses or cuts could be targeted to consumer groups in order to provide benefits and add value.

Seismic proving test of ultimate piping strength (current status of preliminary tests)

International Nuclear Information System (INIS)

Suzuki, K.; Namita, Y.; Abe, H.; Ichihashi, I.; Suzuki, K.; Ishiwata, M.; Fujiwaka, T.; Yokota, H.

2001-01-01

In 1998 Fiscal Year, the 6 year program of piping tests was initiated with the following objectives: i) to clarify the elasto-plastic response and ultimate strength of nuclear piping, ii) to ascertain the seismic safety margin of the current seismic design code for piping, and iii) to assess new allowable stress rules. In order to resolve extensive technical issues before proceeding on to the seismic proving test of a large-scale piping system, a series of preliminary tests of materials, piping components and simplified piping systems is intended. In this paper, the current status of the material tests and the piping component tests is reported. (author)

Conservation through the economics lens.

Science.gov (United States)

Farley, Joshua

2010-01-01

Although conservation is an inherently transdisciplinary issue, there is much to be gained from examining the problem through an economics lens. Three benefits of such an approach are laid out in this paper. First, many of the drivers of environmental degradation are economic in origin, and the better we understand them, the better we can conserve ecosystems by reducing degradation. Second, economics offers us a when-to-stop rule, which is equivalent to a when-to-conserve rule. All economic production is based on the transformation of raw materials provided by nature. As the economic system grows in physical size, it necessarily displaces and degrades ecosystems. The marginal benefits of economic growth are diminishing, and the marginal costs of ecological degradation are increasing. Conceptually, we should stop economic growth and focus on conservation when the two are equal. Third, economics can help us understand how to efficiently and justly allocate resources toward conservation, and this paper lays out some basic principles for doing so. Unfortunately, the field of economics is dominated by neoclassical economics, which builds an analytical framework based on questionable assumptions and takes an excessively disciplinary and formalistic approach. Conservation is a complex problem, and analysis from individual disciplinary lenses can make important contributions to conservation only when the resulting insights are synthesized into a coherent vision of the whole. Fortunately, there are a number of emerging transdisciplines, such as ecological economics and environmental management, that are dedicated to this task.

Economics of Convention and New Economic Sociology

DEFF Research Database (Denmark)

Jagd, Søren

2007-01-01

The aim of the article is to explore potential common themes in economic sociology and economics of conventions. The article explores two issues raised by economics of conventions that may be of particular importance to economic sociology. First, the explicit exploration of the consequences...... of a plurality of forms of justification, as elaborated in économie de la grandeur. This perspective was recently taken up in economic sociology by David Stark's introduction of the notion ‘sociology of worth'. The second issue, recently suggested by André Orléan, is the need to denaturalize economic theory...... and economic action to demonstrate the social constructed nature of economic action. It is argued that these two issues demonstrate that a fruitful dialogue is indeed possible between economic sociology and economics of convention and should be encouraged....

The economics of a landing obligation

DEFF Research Database (Denmark)

Andersen, Peder; Ståhl, Lisa

By 2015 The European Common Fisheries Policy Reform includes a landing obligation in some fisheries and over the next few years all EU fisheries will be facing the obligation to land all catches. In spite of that, there is a lack of theoretical as well as empirical analyses of the consequences...... of a landing obligation. The paper includes an empirical analysis of the landing obligation’s impact on the Danish fishery in the short run. In the first part of the paper, we survey the fisheries economics literature for theoretical findings regarding behavioural aspects of a discard ban and we exploring gaps...... things, the analysis shows that the fisheries will suffer economic losses under the landing obligation if quotas are not increased with the historical discard rate. With quota top-ups however fisheries can experience economic gains which increase with reduced minimum sizes or by increasing selectivity....

Partnering for Economic Development: How Town-Gown Relations Impact Local Economic Development in Small and Medium Cities

Science.gov (United States)

Massey, Jennifer; Field, Sean; Chan, Yolande

2014-01-01

Universities play an increasingly prominent role in shaping regional, social, and economic development. In Canada, however, spatial, economic, and social differences between universities and their host communities continue to challenge positive town--gown relationships and undermine the benefits associated with high concentrations of prospective…

The Economics Degree in Australia: Down but Not out?

Science.gov (United States)

Round, David K.; Shanahan, Martin P.

2010-01-01

Before 1980, strong demand existed in Australia for the economics degree. Since then, competition from programs in business and management has increased. Student preferences have shifted from university and secondary economics. Economics enrollments have declined in both sectors. The authors analyze these trends and assess economic education…

Economic Citizenship and Socio-Economic Rationality as Foundations of an Appropriate Economic Education

Directory of Open Access Journals (Sweden)

Christoph Schank

2014-10-01

Full Text Available In this article we argue that social science education needs to convey more than operational mechanisms of society. Especially in socio-economic education, questions of business ethics, i.e. phenomena of economics and society need to be integrated and reflected, decidedly focusing on the moral content of economics. With the introduction of economic citizenship as the ideal economic actor to be the purpose of economic education, this paper proposes that economic education needs to connect economic expertise and moral judgment and should also allude to the necessity of every market action’s conditional legitimization by society. We propose to discuss different ‘sites’ of morality as a heuristic approach to the different areas of economic responsibility. The individual, organizational and political level of responsibility helps to categorize the different moral issues of economic activity and serves as a great pattern to explain economic relations to scholars and students.

Temporal trends in BMI in Argentina by socio-economic position and province-level economic development, 2005-2009.

Science.gov (United States)

Christine, Paul J; Diez Roux, Ana V; Wing, Jeffrey J; Alazraqui, Marcio; Spinelli, Hugo

2015-04-01

We investigated temporal trends in BMI, and assessed hypothesized predictors of trends including socio-economic position (SEP) and province-level economic development, in Argentina. Using multivariable linear regression, we evaluated cross-sectional patterning and temporal trends in BMI and examined heterogeneity in these associations by SEP and province-level economic development with nationally representative samples from Argentina in 2005 and 2009. We calculated mean annual changes in BMI for men and women to assess secular trends. Women, but not men, exhibited a strong cross-sectional inverse association between SEP and BMI, with the lowest-SEP women having an average BMI 2.55 kg/m(2) greater than the highest-SEP women. Analysis of trends revealed a mean annual increase in BMI of 0.19 kg/m(2) and 0.15 kg/m(2) for women and men, respectively, with slightly greater increases occurring in provinces with greater economic growth. No significant heterogeneity in trends existed by individual SEP. BMI is increasing rapidly over time in Argentina irrespective of various sociodemographic characteristics. Higher BMI remains more common in women of lower SEP compared with those of higher SEP.

Health economic evaluation: important principles and methodology.

Science.gov (United States)

Rudmik, Luke; Drummond, Michael

2013-06-01

To discuss health economic evaluation and improve the understanding of common methodology. This article discusses the methodology for the following types of economic evaluations: cost-minimization, cost-effectiveness, cost-utility, cost-benefit, and economic modeling. Topics include health-state utility measures, the quality-adjusted life year (QALY), uncertainty analysis, discounting, decision tree analysis, and Markov modeling. Economic evaluation is the comparative analysis of alternative courses of action in terms of both their costs and consequences. With increasing health care expenditure and limited resources, it is important for physicians to consider the economic impact of their interventions. Understanding common methodology involved in health economic evaluation will improve critical appraisal of the literature and optimize future economic evaluations. Copyright © 2012 The American Laryngological, Rhinological and Otological Society, Inc.

Debt, Democratization, and Development in Latin America: How Policy Can Affect Global Warming

Science.gov (United States)

Aubourg, Rene W.; Good, David H.; Krutilla, Kerry

2008-01-01

The environmental Kuznets curve (EKC) hypothesis conjectures a nonlinear relationship between pollution and economic growth, such that pollution per capita initially increases as countries economically develop, but then reaches a maximum point before ultimately declining. Much of the EKC literature has focused on testing this basic hypothesis and,…

China-Pakistan Economic Corridor.

Energy Technology Data Exchange (ETDEWEB)

Boyce, Tucker [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-01-01

International trade and related economic activities in Central and South Asia are increasing as developing economies, particularly India and Pakistan, grow. China continues to emerge as a major regional and global power and has embarked upon numerous regional economic and political initiatives . A major development is the China - Pakistan Economic Corridor (CPEC), a host of infrastructure and trade projects worth over 40 billion American dollars . This report analyzes CPEC a nd its potential regional effects, including the trade security implications of the port and land infrastructure developments . As trade increase s in the reg ion and the major CPEC infrastructure projects are completed, there will be numerous implications on trade security and geopolitics within South Asia. CPEC projects uniquely intersect numerous regional situations, including territorial disputes in Kashmir, the Afghanistan/Pakistan border, and Chinese foreign policy a mbitions. A nuanced understanding of these effects can influence future policy adjustments in this region . The views expressed in this report are those of the author and do not necessarily reflect the position of Sandia National Laboratories or the author's current and past institutions.

Rethinking Economics and Education: Exponential Growth and Post-Growth Strategies

Science.gov (United States)

Irwin, Ruth

2017-01-01

Education is increasingly vocational and structured to serve the ongoing exponential increase in economic growth. Climate change is an outcome of these same economic values and praxes. Attempts to shift these values and our approach to technology are continually absorbed and overcome by the pressing motif of economic growth. In this article, Ruth…

Modeling the economic and epidemiologic impact of hookworm vaccine and mass drug administration (MDA) in Brazil, a high transmission setting.

Science.gov (United States)

Bartsch, Sarah M; Hotez, Peter J; Hertenstein, Daniel L; Diemert, David J; Zapf, Kristina M; Bottazzi, Maria Elena; Bethony, Jeffrey M; Brown, Shawn T; Lee, Bruce Y

2016-04-27

Although mass drug administration (MDA) has helped reduce morbidity attributed to soil-transmitted helminth infections in children, its limitations for hookworm infection have motivated the development of a human hookworm vaccine to both improve morbidity control and ultimately help block hookworm transmission leading to elimination. However, the potential economic and epidemiologic impact of a preventive vaccine has not been fully evaluated. We developed a dynamic compartment model coupled to a clinical and economics outcomes model representing both the human and hookworm populations in a high transmission region of Brazil. Experiments simulated different implementation scenarios of MDA and vaccination under varying circumstances. Considering only intervention costs, both annual MDA and vaccination were highly cost-effective (ICERs ≤ $790/DALY averted) compared to no intervention, with vaccination resulting in lower incremental cost-effectiveness ratios (ICERs ≤ $444/DALY averted). From the societal perspective, vaccination was economically dominant (i.e., less costly and more effective) versus annual MDA in all tested scenarios, except when vaccination was less efficacious (20% efficacy, 5 year duration) and MDA coverage was 75%. Increasing the vaccine's duration of protection and efficacy, and including a booster injection in adulthood all increased the benefits of vaccination (i.e., resulted in lower hookworm prevalence, averted more disability-adjusted life years, and saved more costs). Assuming its target product profile, a pediatric hookworm vaccine drastically decreased hookworm prevalence in children to 14.6% after 20 years, compared to 57.2% with no intervention and 54.1% with MDA. The addition of a booster in adulthood further reduced the overall prevalence from 68.0% to 36.0% and nearly eliminated hookworm infection in children. Using a human hookworm vaccine would be cost-effective and in many cases economically dominant, providing both health

Economic Sociology and Economics of Convention

DEFF Research Database (Denmark)

Jagd, Søren

This paper is part of a larger exploration of the French Economics of Convention tradition. The aim of the paper is to explore potential themes of common interest to economic sociology and Economics of Conventions. The paper is in two parts. First, I summarise the main theoretical features of EC...... the institutional framework of social action. Second, I explore two issues raised by economics of conventions that may be particularly important to consider for economic sociology. The first issue is the explicit exploration of the consequences of a plurality of forms of justification suggested by Luc Boltanski...... and Laurent Thévenot in ‘économie de la grandeur’. This perspective has already been taken up in economic sociology in David Stark’s notion of a ‘Sociology of Worth’. The second issue, recently suggested by André Orléan, is the need to denaturalise economic theory and economic action to demonstrate the social...

Using Increases in Criminal Deportees from the US to Estimate the Effect of Crime on Economic Growth and Development in Latin America and the Caribbean

Directory of Open Access Journals (Sweden)

Garfield O. Blake

2015-11-01

Full Text Available Previous empirical studies have uncovered little evidence that crime hinders development, possibly due to simultaneity problems. This paper uses the increase in criminal deportees from the US as an instrumental variable to identify the causal effect of crime on economic growth and development. An increase in the number of criminal deportees received by a country is shown to substantially increase that country’s homicide rate. Using panel data for a sample of 30 Latin America and the Caribbean (LAC countries, I show that the increase in crime is becoming a major obstacle to growth and development in the region.

Proximate and ultimate aspects of phenotypic plasticity in timing of great tit breeding in a heterogeneous environment

NARCIS (Netherlands)

Nager, R.G.; Van Noordwijk, A.J.

1995-01-01

Using the theoretical framework of phenotypic plasticity, we studied the timing of breeding in great tits (Parus major), combining proximate questions about its physiological causation and ultimate questions about its fitness consequences. The plasticity observed in the timing of breeding can be

Clusters - Tourism Activity Increase Competitiveness Support

Directory of Open Access Journals (Sweden)

Carmen IORDACHE

2010-05-01

Full Text Available Tourism represents one of those areas with the greatest potential of global expansion. Tourism development strategy in terms of maximizing its positive effects on regional economic increase and implicitly on the national one starts from the premise that in global economy value is created in regions which are defined as particular geographical entities, separated by geographical reasons and not as political-administrative structures, and economic increase is centrally cumulated and valued according to the economic policy and the national legal system.Regional economic system approach based on “cluster” concept is explained by the fact that the regional activities portfolio is based on an inter and intra-industry networking grouped by cluster, in which is created the value that increases as the activity results are leading to the final consumers.This type of communication aims to highlight the tourism role as a factor in regional development, the clustering process significance in obtaining some competitiveness advantages, clusters development in tourism beginnings, and also the identification methodology used to select one touristic area to create the cluster.

The relationship between income, economic freedom, and BMI.

Science.gov (United States)

Lawson, R A; Murphy, R H; Williamson, C R

2016-05-01

What explains increases in BMI (and obesity) over time and across countries? Although many microeconomic forces are likely explanations, increasingly scholars are arguing that macroeconomic forces such as market liberalism and globalization are root causes of the obesity epidemic. The purpose of this paper is to examine the impact of economic freedom on obesity conditional on the level of income and other factors. We use an unbalanced pooled cross section of up to 135 countries for 1995 and 2000-2009. Our statistical model specifications include pooled OLS and fixed effects. First, we find that controlling for fixed effects siphons off much of the relationship previously documented between economic freedom and BMI. Second, economic freedom is associated with slightly higher BMIs but only for men in developing nations. Lastly, we show that economic freedom increases life expectancy for both men and women in developing countries. Therefore, policies aimed at reducing obesity that limit economic liberalism may come at the expense of life expectancy in the developing world. Copyright © 2016 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

French Economics of Convention and Economic Sociology

DEFF Research Database (Denmark)

Jagd, Søren

foundation of markets and of money may be an occasion for economic sociology to focus even more on elaborating on the institutional void created by traditional economic theory. A second point is that economic sociology could benefit from the perspective of a plurality of forms of coordination involved......The French Economics of convention tradition has developed to be an influential research tradition situated in the area between economics and sociology. The aim of the paper is to explore some of the themes that may be common to economics of conventions and economic sociology by looking more...... closely into three recent texts from the economics of convention tradition discussing, in slightly different ways, differences and similarities between economics of convention and economic sociology. It is argued that André Orléan’s point that a common aim could be to ‘denaturalise’ the institutional...

Economic conversion: The US experience

International Nuclear Information System (INIS)

Williams, R.C.

1994-01-01

At the end of the Second World War, our country experienced what economists have called open-quotes The Great Conversionclose quotes or open-quotes The Great Disarmament.close quotes Following that period and until the beginning of the Viet-Nam War was a time marked by economic expansion and boom. Since those years, there have been several periods during which bases were closed and defense spending was slowed. For the communities going through these transitions, again there was economic expansion. A recent survey reports that, within the last 25 years, over 100 communities redeveloped their economic base and experienced, not catastrophy as they expected, but a period of economic growth. Jobs were not lost but nearly doubled. Small businesses and educational institutions multiplied. Building starts accelerated. The survey attributed this economic growth to proper planning, increased awareness of the need for job training and education, diversification of economic activity, and an ownership on the part of the citizens in their collective economic future. The lesson for us should be that realigning our community economic priorities away from such a strong emphasis on military spending and toward a diverse and productive civilian economy brings economic health. We are relearning this lesson in the redevelopment of Lowry Air Force Base and the transition of Rocky Flats Nuclear Plant from a weapons manufacturing mission to one of cleanup

Integrating economic parameters into genetic selection for Large White pigs.

Science.gov (United States)

Dube, Bekezela; Mulugeta, Sendros D; Dzama, Kennedy

2013-08-01

The objective of the study was to integrate economic parameters into genetic selection for sow productivity, growth performance and carcass characteristics in South African Large White pigs. Simulation models for sow productivity and terminal production systems were performed based on a hypothetical 100-sow herd, to derive economic values for the economically relevant traits. The traits included in the study were number born alive (NBA), 21-day litter size (D21LS), 21-day litter weight (D21LWT), average daily gain (ADG), feed conversion ratio (FCR), age at slaughter (AGES), dressing percentage (DRESS), lean content (LEAN) and backfat thickness (BFAT). Growth of a pig was described by the Gompertz growth function, while feed intake was derived from the nutrient requirements of pigs at the respective ages. Partial budgeting and partial differentiation of the profit function were used to derive economic values, which were defined as the change in profit per unit genetic change in a given trait. The respective economic values (ZAR) were: 61.26, 38.02, 210.15, 33.34, -21.81, -68.18, 5.78, 4.69 and -1.48. These economic values indicated the direction and emphases of selection, and were sensitive to changes in feed prices and marketing prices for carcasses and maiden gilts. Economic values for NBA, D21LS, DRESS and LEAN decreased with increasing feed prices, suggesting a point where genetic improvement would be a loss, if feed prices continued to increase. The economic values for DRESS and LEAN increased as the marketing prices for carcasses increased, while the economic value for BFAT was not sensitive to changes in all prices. Reductions in economic values can be counterbalanced by simultaneous increases in marketing prices of carcasses and maiden gilts. Economic values facilitate genetic improvement by translating it to proportionate profitability. Breeders should, however, continually recalculate economic values to place the most appropriate emphases on the respective

Economics of rapeseed production in Serbia

Directory of Open Access Journals (Sweden)

Popović Rade

2010-01-01

Full Text Available Rapeseed production in Serbia is characterized by an increasing trend, as a result of positive price signals from international market. Since previous researches on economics of rapeseed production were aimed at non-family farms, focus in this paper is on the same aspects on family farms from lowland production region. Results are analyzed in view of micro and macro-economic trends. Increase of world demand for oil crops, as a result of increasing production of renewable fuels and food needs, causes a trend of higher prices, which will probably remain in the following period. Due to this, opportunities are made for Serbian farmers in lowland production region to increase agriculture area under rapeseed. .

"Big data" in economic history.

Science.gov (United States)

Gutmann, Myron P; Merchant, Emily Klancher; Roberts, Evan

2018-03-01

Big data is an exciting prospect for the field of economic history, which has long depended on the acquisition, keying, and cleaning of scarce numerical information about the past. This article examines two areas in which economic historians are already using big data - population and environment - discussing ways in which increased frequency of observation, denser samples, and smaller geographic units allow us to analyze the past with greater precision and often to track individuals, places, and phenomena across time. We also explore promising new sources of big data: organically created economic data, high resolution images, and textual corpora.

Thermal performance measurements on ultimate heat sinks--cooling ponds

International Nuclear Information System (INIS)

Hadlock, R.K.; Abbey, O.B.

1977-12-01

The primary objective of the studies described is to obtain the requisite data, with respect to modeling requirements, to characterize thermal performance of heat sinks for nuclear facilities existing at elevated water temperatures in result of experiencing a genuinely large heat load and responding to meteorological influence. The data should reflect thermal performance for combinations leading to worst-case meteorological influence. A geothermal water retention basin has been chosen as the site for the first measurement program and data have been obtained in the first of several experiments scheduled to be performed there. These data illustrate the thermal and water budgets during episodes of cooling from an initially high pond water bulk temperature. Monitoring proceeded while the pond experienced only meteorological and seepage influence. The data are discussed and are presented as a data volume which may be used for calculation purposes. Suggestions for future measurement programs are stated with the intent to maintain and improve relevance to nuclear ultimate heat sinks while continuing to examine the performance of the analog geothermal pond. It is further suggested that the geothermal pond, with some modification, may be a suitable site for spray pond measurements

ECOLOGICAL ECONOMICS VS ECONOMIC(AL ECOLOGY

Directory of Open Access Journals (Sweden)

G. Kharlamova

2015-10-01

Full Text Available Currently world faces the dilemma – ecological economy or economic(al ecology. The researchers produce hundreds of surveys on the topic. However the analyses of recent most cited simulations had shown the diversity of results. Thus, for some states the Kuznets environmental curve has place, for others – no. Same could be said about different years for the same state. It provokes the necessity of drawing new group analyses to reveal the tendencies and relationships between economic and environmental factors. Most flexible and mirror factor of environmental sustainability is the volume of CO2 emissions. The econometric analysis was used for detecting the economic impact on this indicator at the global level and in the spectra of group of states depending on their income. The hypothesis of the existence of environmental Kuznets curve for the analysed data is rejected. Real GDP per capita impact on carbon dioxide emissions is considered only at the global level. The impact of openness of the economy is weak. Rejection happened also to the hypothesis that for the developed countries there is a reverse dependence between the environmental pollution and economic openness. Indicator “energy consumption per capita” impacts on greenhouse gas emissions only in countries with high income. Whereby it should be noted that the more developed a country is, the more elastic is this influence. These results have a potential usage for environmental policy regulation and climate strategy.

Economic analysis in support of broad scale land management strategies.

Science.gov (United States)

Richard. Haynes

2003-01-01

The US has a century of experience with the development of forest policies that have benefited from or been influenced by economic research activities in the forest sector. At the same time, increasing rigor in policy debates stimulated economics research. During the past four decades economic research has evolved to include increased understanding of consumer demands...

Economic crisis and oil market balances

International Nuclear Information System (INIS)

Duquesnoy, S.; Rozenberg, J.; Hourcade, J.Ch.

2011-01-01

One might intuitively think that an economic crisis would at least relieve the pressure on oil supply since it slows energy demand. From the model of the oil market DYSMO, we show that an economic crisis may on the contrary increase tension, as it postpones investment in oil supply. (authors)

Income inequality: Implications and relevant economic policies

Directory of Open Access Journals (Sweden)

Arestis Philip

2016-01-01

Full Text Available The aim of this contribution is to discuss closely the implications of income inequality and the economic policies to tackle it, especially so in view of inequality being one of the main causes of the 2007/2008 international financial crisis and the “great recession” that subsequently emerged. Wealth inequality is also important in this respect, but the focus is on income inequality. Ever since the financial crisis and the subsequent “great recession”, inequality of income, and wealth, has increased and the demand for economic policy initiatives to produce a more equal distribution of income and wealth has become more urgent. Such reduction would help to increase the level of economic activity as has been demonstrated again more recently. A number of economic policy initiatives for this purpose will be the focus of this contribution.

Nuclear energy consumption and economic growth in nine developed countries

International Nuclear Information System (INIS)

Wolde-Rufael, Yemane; Menyah, Kojo

2010-01-01

This article attempts to test the causal relationship between nuclear energy consumption and real GDP for nine developed countries for the period 1971-2005 by including capital and labour as additional variables. Using a modified version of the Granger causality test developed by Toda and Yamamoto (1995), we found a unidirectional causality running from nuclear energy consumption to economic growth in Japan, Netherlands and Switzerland; the opposite uni-directional causality running from economic growth to nuclear energy consumption in Canada and Sweden; and a bi-directional causality running between economic growth and nuclear energy consumption in France, Spain, the United Kingdom and the United States. In Spain, the United Kingdom and the USA, increases in nuclear energy consumption caused increases in economic growth implying that conservation measures taken that reduce nuclear energy consumption may negatively affect economic growth. In France, Japan, Netherlands and Switzerland increases in nuclear energy consumption caused decreases in economic growth, suggesting that energy conservation measure taken that reduce nuclear energy consumption may help to mitigate the adverse effects of nuclear energy consumption on economic growth. In Canada and Sweden energy conservation measures affecting nuclear energy consumption may not harm economic growth.

[Economic aspects of epilepsy].

Science.gov (United States)

Argumosa, A; Herranz, J L

2000-06-01

The economic magnitude of epilepsy is determined by its effect on the employment status of the patients, the cost of drug treatment for them and the healthcare system and the repercussion worldwide. Studies of the cost of the disease show that it has economic importance due to the sum of the direct and indirect costs caused by it. In the case of epilepsy, the results of studies in various countries led to the creation of a Commission on Economic Aspects of Epilepsy. The lack of epidemiological studies regarding epilepsy in Spain may explain the lack of publications on this subject in our country. The percentage of the total cost due to antiepileptic drugs is considerable and will probably increase in the future. The pharmaco-economic evaluation made by cost-benefit, cost-effectiveness, cost-usefulness analysis and studies to minimize costs should serve to use healthcare resources in the most effective manner and justify the rational use of the new antiepileptic drugs. The economic impact of epilepsy is added to the repercussion of the disease itself on the patient and his family. The different distribution of costs in children and adults with epilepsy suggest the need for intervention at an early age to try to reduce the long term economic and personal repercussions. The pharmaco-economic evaluation of the new antiepileptic drugs will make it clear whether their considerable cost is worth paying for their greater effectivity.

Climate Change, Air Pollution, and the Economics of Health Impacts

Science.gov (United States)

Reilly, J.; Yang, T.; Paltsev, S.; Wang, C.; Prinn, R.; Sarofim, M.

2003-12-01

Climate change and air pollution are intricately linked. The distinction between greenhouse substances and other air pollutants is resolved at least for the time being in the context of international negotiations on climate policy through the identification of CO2, CH4, N2O, SF6 and the per- and hydro- fluorocarbons as substances targeted for control. Many of the traditional air pollutant emissions including for example CO, NMVOCs, NOx, SO2, aerosols, and NH3 also directly or indirectly affect the radiative balance of the atmosphere. Among both sets of gases are precursors of and contributors to pollutants such as tropopospheric ozone, itself a strong greenhouse gas, particulate matter, and other pollutants that affect human health. Fossil fuel combustion, production, or transportation is a significant source for many of these substances. Climate policy can thus affect traditional air pollution or air pollution policy can affect climate. Health effects of acute or chronic exposure to air pollution include increased asthma, lung cancer, heart disease and bronchitis among others. These, in turn, redirect resources in the economy toward medical expenditures or result in lost labor or non-labor time with consequent effects on economic activity, itself producing a potential feedback on emissions levels. Study of these effects ultimately requires a fully coupled earth system model. Toward that end we develop an approach for introducing air pollution health impacts into the Emissions Prediction and Policy Analysis (EPPA) model, a component of the MIT Integrated Global Systems Model (IGSM) a coupled economics-chemistry-atmosphere-ocean-terrestrial biosphere model of earth systems including an air pollution model resolving the urban scale. This preliminary examination allows us to consider how climate policy affects air pollution and consequent health effects, and to study the potential impacts of air pollution policy on climate. The novel contribution is the effort to

Tasks of radiation protection in the centralized collection and ultimate disposal of radioactive waste

International Nuclear Information System (INIS)

Boerst, F.M.; Fasten, C.; Koerner, W.; Oppermann, U.; Werner, H.J.; Zappe, D.

1988-01-01

In the GDR, the ERAM (Endlager fuer radioaktive Abfaelle, Morsleben), an operating unit of Volkseigenes Kombinat Kernkraftwerke 'Bruno Leuschner' in Greifswald, is responsible for the central collection and ultimate disposal of radioactive waste. From the licensing body's point of view an assessment is given of the legislation for radioactive wastes, especially as to their collection, transport to and handling in the final repository. As a result, some conclusions are drawn concerning future work in this field. 9 tabs., 34 refs. (author)

Decision Making under Ecological Regime Shift: An Experimental Economic Approach

OpenAIRE

Kawata, Yukichika

2011-01-01

Environmental economics postulates the assumption of homo economicus and presumes that externality occurs as a result of the rational economic activities of economic agents. This paper examines this assumption using an experimental economic approach in the context of regime shift, which has been receiving increasing attention. We observe that when externality does not exist, economic agents (subjects of experimemt) act economically rationally, but when externality exists, economic agents avoi...

Solar energy system economic evaluation for Wormser Columbia, South Carolina

Science.gov (United States)

1980-01-01

The Solar Energy System is not economically beneficial under the assumed economic conditions at the sites considered. Economic benefits from this system depend on decreasing the initial investment and the continued increase in the cost of conventional energy. Decreasing the cost depends on favorable tax treatment and continuing development of solar energy technology. Fuel cost would have to increase drastically while the cost of the system would have to remain constant or decrease for the system to become economically feasible.

The ultimate SharePoint performance guide ! configuring SharePoint, SQL and Office 365 for maximum performance

CERN Document Server

Catrinescu, Vlad

2017-01-01

This is an ultimate guidance on performance for SharePoint Server 2013, 2016 and SharePoint Online inspired both by Microsoft’s best practices and real life experiences from countless deployments on the field.This book was Tech Reviewed by Microsoft MVP & RD Jussi Roine and includes an awesome foreword by SharePoint MVP Christian Buckley.