The economic importance of migrant entrepreneurship: An ...

African Journals Online (AJOL)

The economic importance of migrant entrepreneurship: An application of data ... as an interesting focus for the city's Small and Medium Enterprise (SME) policy. ... and provide a positive stimulus for creative business-making in modern cities.

the economic importance of microorganism in food processing

African Journals Online (AJOL)

BSN

This paper attempts to highlight the Economic Importance of microorganisms in food processing and manufacturing; it goes further to differentiate between the desirable ... Desirable importance are those cost saving and revenue generating activities ... Microorganism (yeast) play very useful role in the Bakery industries.

Application of liquid metals for the extraction of solid metals

International Nuclear Information System (INIS)

Borgstedt, H.U.

1996-01-01

Liquid metals dissolve several solid metals in considerable amounts at moderate temperatures. The dissolution processes may be based upon simple physical solubility, formation of intermetallic phases. Even chemical reactions are often observed in which non-metallic elements might be involved. Thus, the capacity to dissolve metals and chemical properties of the liquid metals play a role in these processes. Besides the solubility also chemical properties and thermochemical data are of importance. The dissolution of metals in liquid metals can be applied to separate the solutes from other metals or non-metallic phases. Relatively noble metals can be chemically reduced by the liquid phases. Such solution processes can be applied in the extractive metallurgy, for instance to extract metals from metallic waste. The recycling of metals is of high economical and ecological importance. Examples of possible processes are discussed. (author)

Historical economic and environmental policies influencing trace metal inputs in Montevideo Bay, Río de la Plata.

Science.gov (United States)

Bueno, C; Brugnoli, E; Figueira, R C L; Muniz, P; Ferreira, P A L; García Rodríguez, F

2016-12-15

Montevideo Bay is located in the middle zone of the Rio de la Plata, and since the foundation of the city, several key economic and environmental policies affected the industry, and thus, metal inputs into this ecosystem. The aim of this study is to evaluate the sedimentary geochemical record of Montevideo Bay, in order to determine the historical inputs of anthropogenic metals to the system. In addition, environmental and economic policies of the country were taken into account to infer the relationship between them and the historic metal input. Concentrations of aluminum, chromium, copper, lead, scandium and zinc were analyzed and the EF and SPI indices were calculated. The analysis showed that since Montevideo foundation, metal concentrations increased in accordance with industry development, and the indices as well as the metal concentration represent a reliable footprint of the history of different economic and environmental policies influencing historical industrial activities. Copyright © 2016 Elsevier Ltd. All rights reserved.

Comparison of the multifractal characteristics of heavy metals in soils within two areas of contrasting economic activities in China

Science.gov (United States)

Li, Xiaohui; Li, Xiangling; Yuan, Feng; Jowitt, Simon M.; Zhou, Taofa; Yang, Kui; Zhou, Jie; Hu, Xunyu; Li, Yang

2016-09-01

Industrial and agricultural activities can generate heavy metal pollution that can cause a number of negative environmental and health impacts. This means that evaluating heavy metal pollution and identifying the sources of these pollutants, especially in urban or developed areas, is an important first step in mitigating the effects of these contaminating but necessary economic activities. Here, we present the results of a heavy metal (Cu, Pb, Zn, Cd, As, and Hg) soil geochemical survey in Hefei city. We used a multifractal spectral technique to identify and compare the multifractality of heavy metal concentrations of soils within the industrial Daxing and agricultural Yicheng areas. This paper uses three multifractal parameters (Δα, Δf(α), and τ''(1)) to indicate the overall amount of multifractality within the soil geochemical data. The results show all of the elements barring Hg have larger Δα, Δf(α), and τ''(1) values in the Daxing area compared to the Yicheng area. The degree of multifractality suggests that the differing economic activities in Daxing and Yicheng generate very different heavy metal pollution loads. In addition, the industrial Daxing area contains significant Pb and Cd soil contamination, whereas Hg is the main heavy metal present in soils within the Yicheng area, indicating that differing clean-up procedures and approaches to remediating these polluted areas are needed. The results also indicate that multifractal modelling and the associated generation of multifractal parameters can be a useful approach in the evaluation of heavy metal pollution in soils.

Copepoda parasites in economically important fish, Mugilidae ...

African Journals Online (AJOL)

FUNMILAYO

of economically important fish, both from the wild and fish farms, thus making them difficult to market. In this study ... Sakiti, 1997; Gbankoto et al., 2003) but no work has been carried out on ... digital weighing balance and recorded. ..... Life Sci. J. 9(3):733-737. Paperna I, Lahav M (1971). New records and further data on fish.

Trace Metal Concentrations in Commercially Important Fishes from ...

African Journals Online (AJOL)

komla

Some trace metals such as zinc and copper are important in small quantities for ...... Cameroon: Institut de recherches meddicales et d'etudes des plantes edicinales, ... Determination of Total Cadmium, Zinc, Lead, Copper in Selected Marine ...

Economic importance of bats in agriculture

Science.gov (United States)

Boyles, Justin G.; Cryan, Paul M.; McCracken, Gary F.; Kunz, Thomas H.

2011-01-01

White-nose syndrome (WNS) and the increased development of wind-power facilities are threatening populations of insectivorous bats in North America. Bats are voracious predators of nocturnal insects, including many crop and forest pests. We present here analyses suggesting that loss of bats in North America could lead to agricultural losses estimated at more than $3.7 billion/year. Urgent efforts are needed to educate the public and policy-makers about the ecological and economic importance of insectivorous bats and to provide practical conservation solutions.

Local knowledge and economic importance of Mondia whitei ...

African Journals Online (AJOL)

Local knowledge of many medicinal lianas that support rural people health in Africa remains poorly documented leaving incomplete understanding of their pharmacological and economic importance. This information is however critical to conserve target species and design formal management strategies. This study aimed ...

The Price Volatility of Precious Metals in Times of Economic and Geopolitical Crisis

Directory of Open Access Journals (Sweden)

Viorel Mionel

2017-09-01

Full Text Available People perceive gold, silver and platinum as jewellery and massive ingots, but their rarity and physicochemical properties recommend them as being suitable for a wide range of uses. The value of gold has led many states to diversify their economic portfolio by creating sovereign reserves. By buying massive amounts of gold, countries like China, Russia, India, Brazil and Turkey suggest that the purchase of precious metals is the best investment during the crisis. Research results show that the value of precious metals greatly increases at times of crisis because buying precious metals indemnifies states against international currency devaluation.

Evolving Importance of Securities Market to Ensure Economic Growth: Evidence from Armenia

Directory of Open Access Journals (Sweden)

Salnazaryan Ashot

2017-12-01

Full Text Available This research aims to reveal the importance of securities market in ensuring economic growth in Armenia. In order to make the research more substantial, we also examined the impact of other financial market segments, such as insurance market and credit market, on the economic growth. To estimate the relationship between financial market segments and economic growth, an empirical research was conducted using correlation and regression techniques. The research reveals that the most significant impact on the economic growth among Armenian financial market segments has the credit market of Armenia. There is no significant relationship between economic growth and insurance, as well as corporate securities market. It is pointed out in the research, that the evolving importance of the role of securities market in the economic growth is not yet demonstrated in Armenia, which, perhaps, results from the absence of interaction between securities market and economy in Armenia.

Import demand of crude oil and economic growth. Evidence from India

International Nuclear Information System (INIS)

Ghosh, Sajal

2009-01-01

This study establishes a long-run equilibrium relationship among quantity of crude oil import, income and price of the imported crude in India for the time span 1970-1971 to 2005-2006 using autoregressive distributed lag (ARDL) bounds testing approach of cointegration. Empirical results show that the long-term income elasticity of imported crude in India is 1.97 and there exists a unidirectional long-run causality running from economic growth to crude oil import. So reduction of crude oil import will not affect the future economic growth in India in the long-run. India should take various energy efficiency and demand side management measures in transport sector along with other measures like expanding and strengthening indigenous resource-base, substituting imported fuels by domestic fuels and de-controlling the price of petroleum products to reduce its import dependence. (author)

ECONOMIC IMPORTANCE OF THE PREVENTIVE MEASURES IN DENTISTRY.

Science.gov (United States)

Deljo, Emsudina; Sijercic, Zinaida; Mulaosmanovic, Amina; Musanovic, Alma; Prses, Nedim

2016-10-01

Previous studies have shown that the state of oral health in the area of Podrinje Canton is really poor. Taking into account that in the last five years are implemented two projects in the municipality it is necessary to examine the impact of preventive measures in dentistry on the oral health. a) To evaluate the impact of continuing education and local fluoridation on the state of oral health; b) To analyze the economic importance of preventive measures. For the purpose of the research on activities of continuing education on the importance of oral health and local fluoridation of teeth and to determine the economic aspects of the application of preventive measures is tested and reviewed 900 students from fourth to ninth grade. The children were divided into three groups of 300 students in each group: a) In the first group of children is carried out continuous education about proper tooth brushing and the importance of oral hygiene and local fluoridation twice a year during the last three years, b) In the second group children carried out local fluoridation twice a year during the last three years while in the third group, there were no continuous prevention measures; c) Used is a single questionnaire for all respondents. Data obtained in this study were analyzed by descriptive and inferential statistical methods. The importance of continuing education and local fluoridation is clearly reflected in the different values DMF-index, which was the subject of research. In the first group, in which is carried out continuous education and local fluoridation value of DMF index was 2.7, in the second group with local fluorination this value was 3.56, while in the third group, in which is not implemented preventive measures, the value DMF- index was 5.93. From an economic point the preventive measures are the cheapest, most effective and the best solution in order to maintain oral health.

THE IMPORTANCE OF ECONOMIC PROMOTION FOR A SMALL OPEN ECONOMY – THE CASE OF SLOVENIA

OpenAIRE

DEJAN ROMIH

2014-01-01

This paper discusses the importance of economic promotion for Slovenia and certain other European countries affected by the current economic crisis. For a small open economy like Slovenia, economic promotion is particularly important for several reasons. One of them is its contribution to Slovenia’s overall economic performance (in terms of achieving certain economic goals such as reducing unemployment).

Radiation protection aspects in importing metallic scraps

International Nuclear Information System (INIS)

Risica, S.; Di Ciaccio, P.

1996-09-01

The meeting deals with radiation protection problems caused by the possibility that radioactive metal scraps or radioactive sources hidden in the scraps, may arrive in a foundry. The importance of this issue and of rational and systematic solutions is showed by several accidents, happened in the past in numerous countries, by many signals in Italy and by some papers published in international scientific journals or reports issued by authorities and institutions in different countries

[Strategic planning: an important economic action for German hospitals].

Science.gov (United States)

Wiese, Christoph H R; Zink, Wolfgang; Russo, Sebastian G

2011-11-01

In medical systems, economic issues and means of action are in the course of dwindling human (physicians and nurses) and financial resources are more important. For this reason, physicians must understand basic economic principles. Only in this way, there may be medical autonomy from social systems and hospital administrators. The current work is an approach to present a model for strategic planning of an anesthesia department. For this, a "strengths", "weaknesses", "opportunities", and "threats" (SWOT) analysis is used. This display is an example of an exemplary anaesthetic department. © Georg Thieme Verlag Stuttgart · New York.

Contamination of the soil along the river Zletovska by metals as by products of economic production of Pb-Zn

OpenAIRE

Boev, Blazo; Lepitkova, Sonja

1996-01-01

This paper shows the results constraining the degree of contamination of soil along the course of the River Zletovska by some mewls. These are by- products of economic production of lead-zinc ores which are common in this area. Contamination of soils by some metals, first of all by Pb, Zn, Cu, Cd, As, Fe, Al, Mn, Na, K is an important issue for the quality of the environment in which we live from several aspects: accumulation of waters under river alluvions; agricultural produ...

Relative Importance of Political Instability and Economic Variables on Perceived Country Creditworthiness

OpenAIRE

Suk Hun Lee

1993-01-01

This paper examines the relative importance of political instability and economic variables on perceived country creditworthiness. Our results indicate that both political instability and economic variables are taken into account in evaluating country creditworthiness; however, it appears that bankers assign larger weight to economic performances, which we except of reflect longer term political stability. In addition, the frequency of changes in the regime and armed conflict, both proxying f...

Economic importance of non-destructive testing

International Nuclear Information System (INIS)

Loebert, P.

1979-01-01

On May 21 to 23, 1979, the annual meeting of the Deutsche Gesellschaft fuer Zerstoerungsfreie Pruefung took place in Lindau near the Bodensee lake. About 600 experts from Germany and abroad participated in the meeting, whose general subject was 'The Economic Importance of Non-Destructive Testing'. Theoretical problems and practical investigations were discussed in a number of papers on special subjects. Apart from the 33 papers, there was also a poster show with 53 stands with texts, drawings, diagrams, and figures where the authors informed those interested on the latest state of knowledge in testing. The short papers were read in six sessions under the headings of rentability of non-destructive testing, X-ray methods, electromagnetic methods, and ultrasonic methods 1 and 2. (orig.) [de

Economic Assessment for Recycling Critical Metals From Hard Disk Drives Using a Comprehensive Recovery Process

Science.gov (United States)

Nguyen, Ruby Thuy; Diaz, Luis A.; Imholte, D. Devin; Lister, Tedd E.

2017-09-01

Since the 2011 price spike of rare earth elements (REEs), research on permanent magnet recycling has blossomed globally in an attempt to reduce future REE criticality. Hard disk drives (HDDs) have emerged as one feasible feedstock for recovering valuable REEs such as praseodymium, neodymium, and dysprosium. Nevertheless, current processes for recycling electronic waste only focus on certain metals as a result of feedstock and metal price uncertainties. In addition, there is a perception that recycling REEs is unprofitable. To shed some light on the economic viability of REE recycling from U.S. HDDs, this article combines techno-economic information of an electro-hydrometallurgical process with end-of-life HDD availability in a simulation model. The results showed that adding REE recovery to an HDD base and precious metal recovery process was profitable given current prices. Recovered REEs from U.S. HDDs could meet up to 5.2% rest-of-world (excluding China) neodymium magnet demand. Feedstock, aluminum, and gold prices are key factors to recycling profitability. REEs contributed 13% to the co-recycling profit.

Bioaccessibility of micron-sized powder particles of molybdenum metal, iron metal, molybdenum oxides and ferromolybdenum--Importance of surface oxides.

Science.gov (United States)

Mörsdorf, Alexander; Odnevall Wallinder, Inger; Hedberg, Yolanda

2015-08-01

The European chemical framework REACH requires that hazards and risks posed by chemicals, including alloys and metals, that are manufactured, imported or used in different products (substances or articles) are identified and proven safe for humans and the environment. Metals and alloys need hence to be investigated on their extent of released metals (bioaccessibility) in biologically relevant environments. Read-across from available studies may be used for similar materials. This study investigates the release of molybdenum and iron from powder particles of molybdenum metal (Mo), a ferromolybdenum alloy (FeMo), an iron metal powder (Fe), MoO2, and MoO3 in different synthetic body fluids of pH ranging from 1.5 to 7.4 and of different composition. Spectroscopic tools and cyclic voltammetry have been employed to characterize surface oxides, microscopy, light scattering and nitrogen absorption for particle characterization, and atomic absorption spectroscopy to quantify released amounts of metals. The release of molybdenum from the Mo powder generally increased with pH and was influenced by the fluid composition. The mixed iron and molybdenum surface oxide of the FeMo powder acted as a barrier both at acidic and weakly alkaline conditions. These findings underline the importance of the surface oxide characteristics for the bioaccessibility of metal alloys. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

Radon monitoring in sites of economical importance in Jamaica

International Nuclear Information System (INIS)

Grant, C.N.; Lalor, G.C.; Balcázar, M.

2012-01-01

The main task was to evaluate possible radon risk to the public and workers in four caves of economical importance. Green Grotto Cave is a large labyrinthine limestone cave, open to the tourism; kept Rn concentration in the range 30–40 Bq m −3 . Xtabil a coral limestone sea cave is part of a beach resort resulted in very low radon concentration of 10 Bq m −3 . Windsor is an intricate limestone cave system showed Rn concentration in the range 250–350 Bq m −3 . Whereas the Oxford caves, is situated in a region of high radioactivity in soil due to the bauxite mines, reached a maximum of 2592 Bq m −3 . - Highlights: ► Touristic caves of economical importance shown no radon risk for workers and visitors. ► Maximum permanence time due to abnormal radon is given for caves used by speleologist. ► Despite high Rn and U in soil in bauxite areas no risk is determined in houses.

The economic importance of meetings and conferences: A satellite account approach

OpenAIRE

Jones, C; Li, S

2015-01-01

Meetings and conventions (MICE) visitation is often considered an important element of the travel economy, and destinations target such activities to encourage their growth. It has hitherto been difficult to measure the economic significance of such activity at any spatial scale. Latterly, the development and codification of tourism satellite account (TSA) approaches to the economic measurement of tourism offers an opportunity to develop a parallel approach to understanding the MICE economy. ...

[Economic determinants of the demand for importation of pharmacochemical and pharmaceutical products].

Science.gov (United States)

Santos, Anderson Moreira Aristides Dos; Tejada, César Augusto Oviedo; Jacinto, Paulo de Andrade

2017-09-28

: This article analyzes the relationship between the demand for importation of pharmacochemical and pharmaceutical products and economic variables (exchange rate, import prices, and aggregate income) in Brazil, using monthly data from 1997-2014. The main results showed that increases in aggregate income and price reductions in imports have a positive and significant impact (elastic and inelastic, respectively) on imports. Exchange rate was only significant in the more aggregate model. Thus, aggregate income was a robust variable with strong impact on the importation of pharmacochemical and pharmaceutical products. The arguments in the literature that this industry's international trade deficit is related to a deficit in knowledge and technology and the current study's results provide evidence that as economic activity grows, there is a greater demand for this type of product. Additionally, if domestic production is insufficient, there is a need for imports, which can generate pressure on the trade deficit in the industry and contribute to Brazil's dependence on other countries.

Economics of power generation from imported biomass

International Nuclear Information System (INIS)

Lako, P.; Van Rooijen, S.N.M.

1998-02-01

Attention is paid to the economics of import of biomass to the Netherlands, and subsequent utilisation for power generation, as a means to reduce dependence on (imported) fossil fuels and to reduce CO2 emission. Import of wood to the extent of 40 PJ or more from Baltic and South American states seems to be readily achievable. Import of biomass has various advantages, not only for the European Union (reduced CO2 emissions) but also for the countries of origin (employment creation). However, possible disadvantages or risks should be taken into account. With that in mind, import of biomass from Baltic states seems very interesting, although it should be noted that in some of those countries the alternative of fuel-switching to biomass seems to be more cost-effective than import of biomass from those countries. Given the expected increase in inland biomass consumption in the Baltic countries and the potential substantial future demand for biomass in other Western European countries it is expected that the biomass supply from Baltic countries will not be sufficient to fulfill the demand. An early focus on import from other countries seems advisable. Several power generation options are available with short to medium term potential and long term potential. The margin between costs of biomass-fuelled power and of coal fired power will be smaller, due to substantial improvements in power generating efficiency and reductions of investment costs of options for power generation from biomass, notably Biomass Gasification Combined Cycle. 18 refs

IOLOGICAL IMPORTANCE AND TOXICITY OF HEAVY METALS FOR BIOTA OF FRESHWATER BODIES (REVIEW

Directory of Open Access Journals (Sweden)

I. Hrytsyniak

2014-06-01

Full Text Available Purpose. To investigate the sources of scientific information on biological functions of heavy metals (Fe, Zn, Mn, Cu, Ni, Co, Pb, Cd and their negative effect on biota of fresh water bodies. Findings. A review of works of a variety of scientists showed that the majority of the studied heavy metals (Fe, Zn, Mn, Cum and Co played an important role in vital functions of freshwater organisms. The significance of other studied heavy metals (Ni, Pb, and Cd is probable or unknown. Besides biological importance, we also know about toxicity of heavy metals – a group of mineral polluting substances, which are the most distributed and dangerous for biota. Their negative effect includes drastic deterioration of conditions for existence of the majority of aquatic organisms, some species disappear, others reduce their number, components of trophic chains are lost, links in ecosystems become broken, and productivity of biocenoses decreases. Practical value. An array of generalized information will be useful for scientists who investigate freshwater ecosystems and effect of toxicants on them, in particular heavy metals.

The Economic Importance of Forest Products in Enugu State, Nigeria

African Journals Online (AJOL)

The Economic Importance of Forest Products in Enugu State, Nigeria. ... International Journal of Tropical Agriculture and Food Systems ... The regression results, showed that access to modern forest products harvesting/processing technology (Te) and relative contribution of forest output in total household economy (Ro) ...

Economic importance and GIS mapping of medicinal plants in Iran ...

African Journals Online (AJOL)

This study identified the economic importance of medicinal plants and evaluated with Geographical Information System (GIS) tool to develop spatial maps covering medicinal plants prevalent in Darkesh area, Northern Khorasan, Iran. Then provide the coordinates of the identified area as your results. 10 medicinal plants ...

Vegetation status and socio-economic importance of gum and resin ...

African Journals Online (AJOL)

Ethiopian Journal of Biological Sciences ... Abstract. Study on population status, socio-economic importance and threats of gum- and resin-producing plant species was made in Borena, South Wollo, (Ethiopia). ... A total of 14 gum- and resin-bearing plant species representing seven families were recorded. Five of them ...

Economics of All-Polyethylene Versus Metal-Backed Tibial Prosthesis Designs.

Science.gov (United States)

Chambers, Monique C; El-Othmani, Mouhanad M; Sayeed, Zain; Anoushiravani, Afshin; Schnur, Anne-Kathrin; Mihalko, William M; Saleh, Khaled J

2016-05-01

With the large number of total knee arthroplasties being performed and expectations that these numbers will be on the rise over the coming decades, efforts to provide cost-efficient care are of greater interest. The preferred design of knee arthroplasty implants has changed over time, with the original all-polyethylene tibial (APT) design being replaced by metal-backed tibial (MBT) components, as well as more recent considerations of newer APT designs. Modern APT components have been shown to have similar or superior outcomes than MBT components. Despite their limitations, APT components can be used to reduce the economic burden to the provider, medical institution, and health care system as a whole. There is a paucity of evidence-based literature directly comparing the cost associated with APT and MBT components. The purpose of this report is to review the literature to assess the available data regarding direct and indirect costs of both designs so that orthopedic surgeons can account for economic differences in everyday practice. [Orthopedics. 2016; 39(3):S61-S66.]. Copyright 2016, SLACK Incorporated.

Impact of the global economic crisis on metal levels in particulate matter (PM) at an urban area in the Cantabria Region (Northern Spain)

International Nuclear Information System (INIS)

Arruti, A.; Fernandez-Olmo, I.; Irabien, A.

2011-01-01

Air pollution by particulate matter is well linked with anthropogenic activities; the global economic crisis that broke out in the last year may be a proper indicator of this close relationship. Some economic indicators show the regional effects of the crisis on the Cantabria Region. The present work aims to evaluate the impact of the economic crisis on PM10 levels and composition at the major city of the region, Santander. Some metals linked to anthropogenic activities were measured at Santander and studied by Positive Matrix Factorization; this statistical analysis allowed to identify three main factors: urban background, industrial and molybdenum-related factor. The main results show that the temporal trend of the levels of the industrial tracers found in the present study are well agree with the evolution of the studied economic indicators; nevertheless, the urban background tracers and PM10 concentration levels are not well correlated with the studied economic indicators. - Highlights: → The impact of the crisis is higher on the PM-bound metal levels than on the PM levels. → The crisis effects on the trace metal associated to the urban background are negligible. → The temporal trend of the industrial trace metals levels and the studied economic indicators is similar. → The crisis effects on the main industrial tracer levels in PM2.5 and PM10 are similar. - The study presents an evaluation of the economic crisis impact on PM levels and composition at a coastal urban area in the Region of Cantabria (Northern Spain).

Forests of Indiana: Their Economic Importance

Science.gov (United States)

Stephen Bratkovich; Joey Gallion; Earl Leatherberry; William Hoover; William Reading; Glenn Durham

2007-01-01

Mental images of Indiana often range from corn, soybeans, and hogs, to high school basketball. The average Hoosier has little knowledge, however, of the scope, productivity, and economic impact of Indiana's forestland. The State's best-kept secret is that its beautiful forests that draw many visitors are also economically vital to the State's economy....

IOLOGICAL IMPORTANCE AND TOXICITY OF HEAVY METALS FOR BIOTA OF FRESHWATER BODIES (REVIEW)

OpenAIRE

I. Hrytsyniak; N. Kolesnyk

2014-01-01

Purpose. To investigate the sources of scientific information on biological functions of heavy metals (Fe, Zn, Mn, Cu, Ni, Co, Pb, Cd) and their negative effect on biota of fresh water bodies. Findings. A review of works of a variety of scientists showed that the majority of the studied heavy metals (Fe, Zn, Mn, Cum and Co) played an important role in vital functions of freshwater organisms. The significance of other studied heavy metals (Ni, Pb, and Cd) is probable or unknown. Besides bi...

Predictors of the Perceived Importance of Food Skills of Home Economics Teachers

Science.gov (United States)

Fordyce-Voorham, Sandra P.

2016-01-01

Purpose: The purpose of this paper is to test an hypothesis that teachers' personal orientations toward food preparation, nutrition and environmental issues would be related to their perceived importance of food skills. Design/methodology/approach: Little research has been conducted on home economics teachers' views on the importance of the food…

THE IMPORTANCE OF LAW AND ECONOMICS IN THE CONTEMPORARY ECONOMIC REALITY

OpenAIRE

Pomaskow, Joanna

2015-01-01

The law and economics movement can improve the functioning of companies doing business in the contemporary, rapidly changing, reality. The tensions between the idea of efficiency and the idea of justice cause difficulties in the application of tools which are proposed by the representatives of the law and economics movement in legal solutions. Economics proposes a new, fresh look at the law, which makes it easier to assess and influence the growth of its transparency. Perspective can therefor...

Study of a simplified method of evaluating the economic maintenance importance of components in nuclear power plant system

International Nuclear Information System (INIS)

Aoki, Takayuki; Takagi, Toshiyuki; Kodama, Noriko

2014-01-01

Safety risk importance of components in nuclear power plants has been evaluated based on the probabilistic risk assessment and used for the decisions in various plant managements. But economic risk importance of the components has not been discussed very much. Therefore, this paper discusses risk importance of the components from the viewpoint of plant economic efficiency and proposes a simplified evaluation method of the economic risk importance (or economic maintenance importance). As a result of consideration, the followings were obtained. (1) A unit cost of power generation is selected as a performance indicator and can be related to a failure rate of components in nuclear power plant which is a result of maintenance. (2) The economic maintenance importance has to major factors, i.e. repair cost at component failure and production loss associated with plant outage due to component failure. (3) The developed method enables easy understanding of economic impacts of plant shutdown or power reduction due to component failures on the plane which adopts the repair cost in vertical axis and the production loss in horizontal axis. (author)

Progress on PRISM, an inherently safe, economic, and testable advanced liquid metal reactor

International Nuclear Information System (INIS)

Tippets, F.E.; Salerno, L.N.; Boardman, C.E.; Kwant, W.; Murata, R.E.; Snyder, C.R.

1987-01-01

This paper reports progress on the design of PRISM (Power Reactor Inherently Safe Module) under the DOE-sponsored innovative reactor program now in its third year at General Electric. The purpose of this program is to develop a design for an inherently safe, reliable, and marketable liquid metal fast reactor power plant. The PRISM design approach includes the following key elements: Compact sodium-cooled pool-type reactor modules that are sized to enable factory fabrication, economical shipment to inland as well as water-side sites, and economical full-scale prototype testing for design certification; Nuclear safety-related envelope limited to the reactor modules and their service systems; Inherent, passive shutdown heat removal for loss-of-cooling events; Inherent, passive reactivity shutdown for failure-to-scram events

The Economic Importance of Financial Literacy: Theory and Evidence.

Science.gov (United States)

Lusardi, Annamaria; Mitchell, Olivia S

2014-03-01

This paper undertakes an assessment of a rapidly growing body of economic research on financial literacy. We start with an overview of theoretical research which casts financial knowledge as a form of investment in human capital. Endogenizing financial knowledge has important implications for welfare as well as policies intended to enhance levels of financial knowledge in the larger population. Next, we draw on recent surveys to establish how much (or how little) people know and identify the least financially savvy population subgroups. This is followed by an examination of the impact of financial literacy on economic decision-making in the United States and elsewhere. While the literature is still young, conclusions may be drawn about the effects and consequences of financial illiteracy and what works to remedy these gaps. A final section offers thoughts on what remains to be learned if researchers are to better inform theoretical and empirical models as well as public policy.

Screening of variable importance for optimizing electrodialytic remediation of heavy metals from polluted harbour sediments

DEFF Research Database (Denmark)

Pedersen, Kristine B.; Lejon, Tore; Ottosen, Lisbeth M.

2015-01-01

Using multivariate design and modelling, the optimal conditions for electrodialytic remediation (EDR) of heavy metals were determined for polluted harbour sediments from Hammerfest harbour located in the geographic Arctic region of Norway. The comparative importance of the variables, current......) was computed and variable importance in the projection was used to assess the influence of the experimental variables. Current density and remediation time proved to have the highest influence on the remediation of the heavy metals Cr, Cu, Ni, Pb and Zn in the studied experimental domain. In addition......, it was shown that excluding the acidification time improved the PLS model, indicating the importance of applying a limited experimental domain that covers the removal phases of each heavy metal in the specific sediment. Based on PLS modelling, the optimal conditions for remediating the Hammerfest sediment were...

Economically important species dominate aboveground carbon storage in forests of southwestern Amazonia

Directory of Open Access Journals (Sweden)

N. Galia Selaya

2017-06-01

Full Text Available Tree species in tropical forests provide economically important goods and ecosystem services. In submontane forests of southwestern Amazonia, we investigated the degree to which tree species important for subsistence and trade contribute to aboveground carbon storage (AGC. We used 41 1-hectare plots to determine the species abundance, basal area, and AGC of stems > 10 cm diameter at breast height (dbh. Economically important taxa were classified using ethnobotanical studies and according to their stem density. These taxa (n = 263 accounted for 45% of total stems, 53% of total basal area, and 56% of total AGC, significantly more than taxa with minor or unknown uses (Welch test at p 40 cm and few stems in regeneration classes of dbh < 10 to 20 cm (e.g., Bertholletia excelsa, Cariniana spp., Cedrelinga spp., Ceiba spp., Dipteryx spp., whereas dominant Tetragastris spp., and Pseudolmedia spp. had most stems in low diameter classes and a median diameter of < 30 cm. Bertholletia excelsa, with 1.5 stems per hectare, showed the highest basal area of any species and accounted for 9% of AGC (11 Mg/ha, twice that of the second-ranking species. Our study shows that economic importance and carbon stocks in trees are closely linked in southwestern Amazonia. Unplanned harvests can disrupt synergistic dual roles altering carbon stocks temporally or permanently. Precautionary measures based on species ecology, demography, and regeneration traits should be at the forefront of REDD+ to reconcile maximum harvesting limits, biodiversity conservation, and sustainable forest management.

Heavy Metal Resistance Strategies of Acidophilic Bacteria and Their Acquisition: Importance for Biomining and Bioremediation

Directory of Open Access Journals (Sweden)

Claudio A Navarro

2013-01-01

Full Text Available Microbial solubilizing of metals in acid environments is successfully used in industrial bioleaching of ores or biomining to extract metals such as copper, gold, uranium and others. This is done mainly by acidophilic and other microorganisms that mobilize metals and generate acid mine drainage or AMD, causing serious environmental problems. However, bioremediation or removal of the toxic metals from contaminated soils can be achieved by using the specific properties of the acidophilic microorganisms interacting with these elements. These bacteria resist high levels of metals by using a few "canonical" systems such as active efflux or trapping of the metal ions by metal chaperones. Nonetheless, gene duplications, the presence of genomic islands, the existence of additional mechanisms such as passive instruments for pH and cation homeostasis in acidophiles and an inorganic polyphosphate-driven metal resistance mechanism have also been proposed. Horizontal gene transfer in environmental microorganisms present in natural ecosystems is considered to be an important mechanism in their adaptive evolution. This process is carried out by different mobile genetic elements, including genomic islands (GI, which increase the adaptability and versatility of the microorganism. This mini-review also describes the possible role of GIs in metal resistance of some environmental microorganisms of importance in biomining and bioremediation of metal polluted environments such as Thiomonas arsenitoxydans, a moderate acidophilic microorganism, Acidithiobacillus caldus and Acidithiobacillus ferrooxidans strains ATCC 23270 and ATCC 53993, all extreme acidophiles able to tolerate exceptionally high levels of heavy metals. Some of these bacteria contain variable numbers of GIs, most of which code for high numbers of genes related to metal resistance. In some cases there is an apparent correlation between the number of metal resistance genes and the metal tolerance of each

Utility industry evaluation of the metal fuel facility and metal fuel performance for liquid metal reactors

International Nuclear Information System (INIS)

Burstein, S.; Gibbons, J.P.; High, M.D.; O'Boyle, D.R.; Pickens, T.A.; Pilmer, D.F.; Tomonto, J.R.; Weinberg, C.J.

1990-02-01

A team of utility industry representatives evaluated the liquid metal reactor metal fuel process and facility conceptual design being developed by Argonne National Laboratory (ANL) under Department of Energy sponsorship. The utility team concluded that a highly competent ANL team was making impressive progress in developing high performance advanced metal fuel and an economic processing and fabrication technology. The utility team concluded that the potential benefits of advanced metal fuel justified the development program, but that, at this early stage, there are considerable uncertainties in predicting the net overall economic benefit of metal fuel. Specific comments and recommendations are provided as a contribution towards enhancing the development program. 6 refs

ANALYSIS IMPORT POLICY OF SOYBEAN ON ECONOMICS PERFORMANCE OF INDONESIAN SOYBEAN

Directory of Open Access Journals (Sweden)

Muthiah Abda Azizah

2015-11-01

Full Text Available Trade liberalization is closely related to the opening of market access for Indonesian products to the world and vice versa. Since the soybean trade out of BULOG control began in 1998, soybean imports increased very rapidly (Sudaryanto and Swastika, 2007. This research aims to determine the general picture of soybean economy, factors analyses that influence the economic performance of Indonesian soybean and findings the alternative of policies that can reduce soybean imports in Indonesia. Methods of data analysis are descriptive analysis, 2SLS simultaneous equations, and simulation of policy alternatives. Results of the analysis of the factors that affect the economic performance of Indonesian soybean, consists of 1 The area of soybean harvest is influenced significantly by the price of domestic soybean and domestic prices of corn, 2 Productivity soybean influenced significantly by the domestic prices of soybean and fertilizer prices, 3 soybean demand influenced significantly by population, domestic prices of soybean, 4 domestic prices of soybean significantly affected by world prices of soybean, exchange rates, and soybean supply, 5 Imports of soybean influenced significantly by the domestic demand of soybean and soybean production. Therefore, policy scenarios should be made to reduce soybean imports, including by carrying out the expansion of soybean harvest policy, the policy of increasing the productivity of soybean, the policy of subsidizing the price of fertilizer.

Competitive platinum-group-metal (PGM) supply from the Eastern Limb, Bushveld Complex: Geological, mining and mineral economic aspects

CSIR Research Space (South Africa)

McGill, JE

2011-08-01

Full Text Available -GROUP-METAL (PGM) SUPPLY FROM THE EASTERN LIMB, BUSHVELD COMPLEX: GEOLOGICAL, MINING, AND MINERAL ECONOMIC ASPECTS Dr. Jeannette E. McGill & Prof. Murray W. Hitzman ACKNOWLEDGEMENTS ? COUNCIL FOR SCIENTIFIC AND INDUSTRIAL RESEARCH (CSIR) ? Centre for Mining... Innovation ? Office of Graduate Studies, Fogarty Endowment ? Mr. VISHNU PILLAY (EXECUTIVE HEAD: JV?S ? Anglo Platinum) ? ACADEMIC ADVISORS Prof. Murray Hitzman (Economic Geology); Dr. Hugh Miller (Mining Engineering); Prof. Rodderick Eggert (Mineral...

Indonesia Export, Import, and Demand for Domestic Commodities under Economics Liberalisation

Directory of Open Access Journals (Sweden)

Andi Irawan

2011-09-01

Full Text Available The aim of this research is to identify the behaviour of export, import and domestic commoditiesdemand in liberalization era both in the long run and the short run. This researchapplies the Vector Error Correction Model, Johansen Cointegration Test, Impulse ResponseAnalysis and Granger Causality Test. The data range from 1993:01 to 2002:12. The resultshows that in the long run the cross-price elasticity of imported non agricultural goods withrespect to demand for domestically produced goods have lower magnitudes than own priceelasticity of domestically produced goods. The demand elasticity of import commodities iselastic but that of domestic commodities is inelastic.Keywords: Import, Export, Economic Liberalization, Vector Error Correction Model

Metals industry seeks economic comeback

International Nuclear Information System (INIS)

Nappi, C.

1993-01-01

The North American minerals and metals industry has experienced a shockwave of change during the past two decades but is making a gallant comeback attempt, says Carmine Nappi, a mineral economist at the University of Montreal in Canada. Beginning in the mid-1970s, demand for major metals-aluminum, copper, lead, nickel, and zinc-dropped precipitately as the industrialized world shifted from a products to a services economy and as manufacturers discovered ways to make their products lighter, smaller, and more efficient. At the same time, Nappi says, rising energy and environmental costs pushed mining costs upward and squeezed profit margins, while foreign competitors stepped up their pressure. As a result, more than 7,000 US jobs in the minerals and metals industry were lost between 1980 and 1985. The value of mining production dropped $3.3 billion, and the industry went from $1.9 billion in profits to $900 million in losses. The industry responded to the crisis in different ways, Nappi says. Most zinc producers simply shut down, and many aluminum smelters, especially in the Southeast, also became resigned to their fate. Copper producers, however, fought back, changed the ways they did business, and survived. While conceding that the North American minerals and metals industry may never be as robust again as it was two decades ago, Nappi says the recent changes have slowed, and in some cases reversed, the hemorrhaging

Catalytic potential of selected metal ions for bioleaching, and potential techno-economic and environmental issues: A critical review.

Science.gov (United States)

Pathak, Ashish; Morrison, Liam; Healy, Mark Gerard

2017-04-01

Bioleaching is considered to be a low-cost, eco-friendly technique for leaching valuable metals from a variety of matrixes. However, the inherent slow dissolution kinetics and low metal leaching yields have restricted its wider commercial applicability. Recent advancements in bio-hydrometallurgy have suggested that these critical issues can be successfully alleviated through the addition of a catalyst. The catalyzing properties of a variety of metals ions (Ag + , Hg ++ , Bi +++ , Cu ++ , Co ++ etc.) during bioleaching have been successfully demonstrated. In this article, the role and mechanisms of these metal species in catalyzing bioleaching from different minerals (chalcopyrite, complex sulfides, etc.) and waste materials (spent batteries) are reviewed, techno-economic and environmental challenges associated with the use of metals ions as catalysts are identified, and future prospectives are discussed. Based on the analysis, it is suggested that metal ion-catalyzed bioleaching will play a key role in the development of future industrial bio-hydrometallurgical processes. Copyright © 2017 Elsevier Ltd. All rights reserved.

Global patterns and determinants of the economic importance of bushmeat

DEFF Research Database (Denmark)

Nielsen, Martin Reinhardt; Pouliot, Mariéve; Meilby, Henrik

2017-01-01

to analyse the economic importance of bushmeat to rural households in sites selected with no consideration of the level of bushmeat hunting. Data were gathered from 7978 households in 333 communities across 24 tropical and sub-tropical countries in Latin America, Asia, and Sub-Saharan Africa. We report......, focusing on six general hypothesis identified from the literature. Hunting is more prevalent than generally assumed (39%) but contributes less to rural household income than expected (2%) and mainly through own consumption (87%). Bushmeat is more important in smaller and more remote communities......, in communities in the middle of the cash income distribution, communities with few domestic animals, in countries characterised by poor governance, and with rising costs of living. We argue that bushmeat is likely to be most important to rural households as a source of protein and micronutrients unavailable...

Heavy Metal Concentrations in an Important Mangrove Species, Sonneratia caseolaris, in Peninsular Malaysia

Directory of Open Access Journals (Sweden)

Mohd Fazlin Nazli

2010-01-01

Full Text Available Mangrove forests in Peninsular Malaysia are increasingly threatened by heavy metal pollution. Due to their unique location, mangroves receive heavy metal pollution from upstream areas and the sea. However, little is known about the capacity of mangrove plants to take up and store heavy metals. In this study, the concentrations of cadmium (Cd, chromium (Cr, copper (Cu, lead (Pb and zinc (Zn in an important mangrove species, Sonneratia caseolaris, were measured. It was found that the total concentrations of Cd, Cr, Cu, Pb, and Zn in the sediments were below the general critical soil concentrations. However, the total concentrations of Cu and Pb in both the roots and leaves of Sonneratia caseolaris exceeded the general normal upper range in plants. This study has therefore shown the potential of Sonneratia caseolaris as a phytoremediation species for selected heavy metals in Malaysian mangrove ecosystem.

Possibility of using metal uranium fuel in heavy water reactors

International Nuclear Information System (INIS)

Djuric, B.; Mihajlovic, A.; Drobnjak, Dj.

1965-01-01

The review of metal uranium properties including irradiation in the reactor core lead to the following conclusions. Using metal uranium in the heavy water reactors would be favourable from economic point of view for ita high density, i.e. high conversion factor and low cost of fuel elements fabrication. Most important constraint is swelling during burnup and corrosion

The role and importance of ECB's monetary policy in the global economic crisis

Directory of Open Access Journals (Sweden)

Stakić Nikola

2014-01-01

Full Text Available This paper presents the role and importance of the European Central Bank (ECB in the context of measures and effects that are being taken to repair the consequences of the current economic crisis. The ECB, together with the European single currency, the euro, symbolizes long-lasting monetary integration of the EU states. Such form of integration has created the possibility of a supranational action of ECB in the banking sector and financial markets in general. Along with the other most important central banks in the world, the ECB applies various unconventional instruments of monetary policy to stimulate economic growth and development. In this context, the paper explains the nature and mechanism of such measures in order to influence on the insufficient liquidity in the financial markets.

Concentrations of Heavy Metals in NPK Fertilizers Imported in Serbia

Directory of Open Access Journals (Sweden)

Jelena Milinović

2008-01-01

Full Text Available Concentrations of Pb, Cd, Cu and Mn in sixteen NPK fertilizers imported and widely used in Serbia were determined by flame atomic absorption spectrometry (AAS. The results show that contents of heavy metals varied significantly in different fertilizers dependingon N:P:K ratio and fertilizer origin. Pb and Cd contents in water solution of fertilizers occurred at low ranges: 2.0-3.1 and 0.03- 1.56 mg/kg, respectively. An NPK (15:15:15 fertilizer from Romania was found to contain the highest concentration of Pb and Cd as impurities. Cu content, ranging from 7.1 to 974.7 mg/kg, was the highest in coloured fertilizers from Hungary, the Netherlands and Greece. Mn value in a Hungarian NPK product (10:10:20 exceeds the average Mn value in soil. The data indicate variable contents of heavy metals in fertilizers, some of which are significantly higher than natural concentrations in soil, which suggests that they need to be continuously monitored.

Metal and hydrogen catalysis in isotopic hydrogen exchange in some biologically important heterocyclic compounds

International Nuclear Information System (INIS)

Buncel, E.; Joly, H.A.; Jones, J.R.; Onyido, I.

1989-01-01

This study reports on the catalytic roles of metal and hydrogen ions in tritium exchange in some heterocyclic substrates which occur as residues in many biologically important molecules. We have found that detritiation of 1-methyl[2- 3 H]imidazole is inhibited by a number of metal ions. As well, inhibition of exchange rates was noted with Ag(I) and Cu(II) for [2- 3 H]thiazole and 1-methyl[8- 3 H]inosine, with Ag(I) for [2- 3 H]benzothiazole, and with Cu(II) for 1-methyl[8- 3 H]guanosine. A complete mechanistic description, which includes the various metal ion-coordinated species generated under the experimental conditions, is presented. The results demonstrate the reactivity order: protonated >> metal-coordinated >> neutral substrates. The differential catalytic effects of metal and hydrogen ions in these processes are discussed in terms of the extent of charge developed on the ligating heteroatom in the reaction intermediate. (author). 13 refs.; 1 fig

Heavy metal distribution frequency in Iranian and imported rice varieties marketed in central Iran, Yazd, 2012

Directory of Open Access Journals (Sweden)

Reza Morekian

2013-01-01

Full Text Available Aims: This study aimed to determine the concentration of heavy metals including lead (Pb, cadmium (Cd, and arsenic (As in rice samples in Yazd markets. Materials and Methods: In this study, 108 rice samples were collected from 36 different brands including 26 imported and 10 Iranian rice varieties from July-December 2011. Determination of heavy metals was carried out by wet ashing and digestion methods following graphite furnace atomic absorption spectrometry and hydride generation atomic absorption spectrometry. Results: The average concentrations of lead in both Iranian and imported samples were 328.3 ± 81.44 and 254.55 ± 77.2 μg/kg, respectively, well above the safe limit set by Iranian standard, whereas mean concentrations of cadmium and arsenic were both below their permissible limit. In homemade rice samples, their concentration levels were shown to be 37.25 ± 23.39 and 33.5 ± 18.35 μg/kg, respectively. However, for imported products, their levels were 43.71 ± 13.74 and 87.55 ± 72.99 μg/kg, respectively. Conclusion: Deterministic estimation of exposure to heavy metals from rice showed that there was no health issue concerning exposure to toxic metals through rice intake in Iran when potential risk of each heavy metal is considered individually, cumulative risk assessment must be applied in future studies.

Characterisation of hydrocarbonaceous overlayers important in metal-catalysed selective hydrogenation reactions

Energy Technology Data Exchange (ETDEWEB)

Lennon, David; Warringham, Robbie [School of Chemistry, Joseph Black Building, University of Glasgow, Glasgow G12 8QQ (United Kingdom); Guidi, Tatiana [ISIS Facility, STFC Rutherford Appleton Laboratory, Chilton, Didcot, Oxfordshire OX11 0QX (United Kingdom); Parker, Stewart F., E-mail: stewart.parker@stfc.ac.uk [ISIS Facility, STFC Rutherford Appleton Laboratory, Chilton, Didcot, Oxfordshire OX11 0QX (United Kingdom)

2013-12-12

Highlights: • Inelastic neutron scattering spectroscopy of a commercial dehydrogenation catalyst. • The overlayer present on the catalyst is predominantly aliphatic. • A population of strongly hydrogen bonded hydroxyls is also present. - Abstract: The hydrogenation of alkynes to alkenes over supported metal catalysts is an important industrial process and it has been shown that hydrocarbonaceous overlayers are important in controlling selectivity profiles of metal-catalysed hydrogenation reactions. As a model system, we have selected propyne hydrogenation over a commercial Pd(5%)/Al{sub 2}O{sub 3} catalyst. Inelastic neutron scattering studies show that the C–H stretching mode ranges from 2850 to 3063 cm{sup −1}, indicating the mostly aliphatic nature of the overlayer and this is supported by the quantification of the carbon and hydrogen on the surface. There is also a population of strongly hydrogen-bonded hydroxyls, their presence would indicate that the overlayer probably contains some oxygen functionality. There is little evidence for any olefinic or aromatic species. This is distinctly different from the hydrogen-poor overlayers that are deposited on Ni/Al{sub 2}O{sub 3} catalysts during methane reforming.

Import dependence of industrial enterprises in the region as an economic security hazard

Directory of Open Access Journals (Sweden)

A. N. Makarov

2010-12-01

Full Text Available Import is traditionally considered as a source for saturation of a home market with scarce commodities or goods non-manufactured in an importing country. However, the larger is the share of import in the total volume of deliveries, the greater is the hazard for economic security of the region and for the state upon the whole. The analysis has revealed the fact that in the regional industry there is a real situation of absolute import dependence. It means that enterprises have been functioning only based on import deliveries to manufacture some single components for products of production-technical purposes.

Algae of economic importance that accumulate cadmium and lead: a review

Directory of Open Access Journals (Sweden)

Priscila O. Souza

2012-08-01

Full Text Available Currently, algae and algae products are extensively applied in the pharmaceutical, cosmetic and food industries. Algae are the main organisms that take up and store heavy metals. Therefore, the use of compounds derived from algae by the pharmaceutical industry should be closely monitored for possible contamination. The pollution generated by heavy metals released by industrial and domestic sources causes serious changes in the aquatic ecosystem, resulting in a loss of biological diversity and a magnification and bioaccumulation of toxic agents in the food chain. Since algae are at the bottom of the aquatic food chain, they are the most important vector for transfer of pollution to upper levels of the trophic chain in aquatic environments. Moreover, microalgae are also used for the bioremediation of wastewater, a process that does not produce secondary pollution, that enables efficient recycling of nutrients and that generates biomass useful for the production of bioactive compounds and biofuel.

Algae of economic importance that accumulate cadmium and lead: a review

Directory of Open Access Journals (Sweden)

Priscila O. Souza

2012-06-01

Full Text Available Currently, algae and algae products are extensively applied in the pharmaceutical, cosmetic and food industries. Algae are the main organisms that take up and store heavy metals. Therefore, the use of compounds derived from algae by the pharmaceutical industry should be closely monitored for possible contamination. The pollution generated by heavy metals released by industrial and domestic sources causes serious changes in the aquatic ecosystem, resulting in a loss of biological diversity and a magnification and bioaccumulation of toxic agents in the food chain. Since algae are at the bottom of the aquatic food chain, they are the most important vector for transfer of pollution to upper levels of the trophic chain in aquatic environments. Moreover, microalgae are also used for the bioremediation of wastewater, a process that does not produce secondary pollution, that enables efficient recycling of nutrients and that generates biomass useful for the production of bioactive compounds and biofuel.

Potential economic impact of introduction and spread of the red imported fire ant, Solenopsis invicta, in Hawaii

Science.gov (United States)

Gutrich, J.J.; VanGelder, E.; Loope, L.

2007-01-01

Globally, many invasive alien species have caused extensive ecological and economic damage from either accidental or intentional introduction. The red imported fire ant, Solenopsis invicta, has created billions of dollars in costs annually, spreading as an invasive species across the southern United States. In 1998, the red imported fire ant spread into California creating a highly probable future introduction via shipped products to Hawaii. This paper presents the estimation of potential economic impacts of the red imported fire ant (RIFA) to the state of Hawaii. Evaluation of impacts focuses on the economic sectors of (1) households, (2) agriculture (cattle and crop production), (3) infrastructure (cemeteries, churches, cities, electrical, telephone, and cable services, highways, hospitals and schools), (4) recreation, tourism and business (hotels/resort areas, golf courses, commercial businesses and tourists), and (5) government expenditures (with minimal intervention). The full annual economic costs of the red imported fire ant to Hawaii are estimated (in US$ 2006) to be $211 million/year, comprised of $77 million in damages and expenditures and $134 million in foregone outdoor opportunities to households and tourists. The present value of the projected costs of RIFA over a 20-year period after introduction total $2.5 billion. RIFA invasions across the globe indicate that economic cost-effective action in Hawaii entails implementation of prevention, early detection and rapid response treatment programs for RIFA. ?? 2007 Elsevier Ltd. All rights reserved.

Improved inventory for heavy metal emissions from stationary combustion plants

DEFF Research Database (Denmark)

Nielsen, Malene; Nielsen, Ole-Kenneth; Hoffmann, Leif

On behalf of the Ministry of the Environment DCE at Aarhus University annually reports heavy metals (HM) emissions to the UNECE CLRTAP (United Nations Economic Commission for Europe Convention on Long-Range Transboundary Air Pollution). This report presents updated heavy metal emission factors......-2009. The report also include methodology, references and an uncertainty estimate. In Denmark, stationary combustion plants are among the most important emission sources for heavy metals. Emissions of all heavy metals have decreased considerably (73 % - 92 %) since 1990. The main HM emission sources are coal...

Global epidemiology of phytoplasma diseases of economic importance in Southeast Europe

OpenAIRE

Mitrev, Sasa

2007-01-01

The network ‘Global epidemiology of phytoplasma diseases of economic importance in Southeast Europe’ will coordinate the efforts of plant pathologists, microbiologists and entomologists of Southeast European countries to better monitor phytoplasma strains propagation through nurseries and insect vectors, at the European scale. This will be investigated both in plants and insects using up to date molecular typing tools and real-time PCR detection technology. In addition, the network will initi...

Economic performance of liquid-metal fast breeder reactor and gas-cooled fast reactor radial blankets

International Nuclear Information System (INIS)

Tsoulfanidis, N.; Jankhah, M.H.

1979-01-01

The economic performance of the radial blanket of a liquid-metal fast breeder reactor (LMFBR) and a gas-cooled fast reactor (GCFR) has been studied based on the calculation of the net financial gain as well as the value of the levelized fuel cost. The necessary reactor physics calculations have been performed using the code CITATION, and the economic analysis has been carried out with the code ECOBLAN, which has been written for that purpose. The residence time of fuel in the blanket is the main variable of the economic analysis. Other parameters that affect the results and that have been considered are the value of plutonium, the price of heat, the effective cost of money, and the holdup time of the spent fuel before reprocessing. The results show that the radial blanket of both reactors is a producer of net positive income for a broad range of values of the parameters mentioned above. The position of the fuel in the blanket and the fuel management scheme applied affect the monetary gain. There is no significant difference between the economic performance of the blanket of an LMFBR and a GCFR

Physical energy cost serves as the 'invisible hand' governing economic valuation. Direct evidence from biogeochemical data and the U.S. metal market

International Nuclear Information System (INIS)

Liu, Zhicen; Koerwer, Joel; Nemoto, Jiro; Imura, Hidefumi

2008-01-01

Energy supply is mandatory for the production of economic value. Nevertheless, tradition dictates that an enigmatic 'invisible hand' governs economic valuation. Physical scientists have long proposed alternative but testable energy cost theories of economic valuation, and have shown the gross correlation between energy consumption and economic output at the national level through input-output energy analysis. However, due to the difficulty of precise energy analysis and highly complicated real markets, no decisive evidence directly linking energy costs to the selling prices of individual commodities has yet been found. Over the past century, the US metal market has accumulated a huge body of price data, which for the first time ever provides us the opportunity to quantitatively examine the direct energy-value correlation. Here, by analyzing the market price data of 65 purified chemical elements (mainly metals) relative to the total energy consumption for refining them from naturally occurring geochemical conditions, we found a clear correlation between the energy cost and their market prices. The underlying physics we proposed has compatibility with conventional economic concepts such as the ratio between supply and demand or scarcity's role in economic valuation. It demonstrates how energy cost serves as the 'invisible hand' governing economic valuation. Thorough understanding of this energy connection between the human economic and the Earth's biogeochemical metabolism is essential for improving the overall energy efficiency and furthermore the sustainability of the human society. (author)

Foreign Remittances, Foreign Direct Investment, Foreign Imports and Economic Growth in Pakistan: A Time Series Analysis

Directory of Open Access Journals (Sweden)

Muhammad Tahir

2015-10-01

Full Text Available This empirical research paper focuses on establishing a relationship between external determinants and economic growth of Pakistan economy. Empirical analyses are carried out with time series econometric techniques using data over the period of 1977-2013. The main finding is that external determinants such as foreign remittances, foreign direct investment, and foreign imports matter from a growth perspective. Foreign remittances and foreign direct investment have a significant positive role in the growth process of Pakistan economy. Furthermore, it is found that foreign imports have adversely influenced the economic growth of Pakistan. The study recommends that policy makers shall take appropriate steps to increase the inflow of both foreign remittances and foreign direct investment in order to achieve the long run economic growth.

Health Economic Data in Reimbursement of New Medical Technologies: Importance of the Socio-Economic Burden as a Decision-Making Criterion.

Science.gov (United States)

Iskrov, Georgi; Dermendzhiev, Svetlan; Miteva-Katrandzhieva, Tsonka; Stefanov, Rumen

2016-01-01

Assessment and appraisal of new medical technologies require a balance between the interests of different stakeholders. Final decision should take into account the societal value of new therapies. This perspective paper discusses the socio-economic burden of disease as a specific reimbursement decision-making criterion and calls for the inclusion of it as a counterbalance to the cost-effectiveness and budget impact criteria. Socio-economic burden is a decision-making criterion, accounting for diseases, for which the assessed medical technology is indicated. This indicator is usually researched through cost-of-illness studies that systematically quantify the socio-economic burden of diseases on the individual and on the society. This is a very important consideration as it illustrates direct budgetary consequences of diseases in the health system and indirect costs associated with patient or carer productivity losses. By measuring and comparing the socio-economic burden of different diseases to society, health authorities and payers could benefit in optimizing priority setting and resource allocation. New medical technologies, especially innovative therapies, present an excellent case study for the inclusion of socio-economic burden in reimbursement decision-making. Assessment and appraisal have been greatly concentrated so far on cost-effectiveness and budget impact, marginalizing all other considerations. In this context, data on disease burden and inclusion of explicit criterion of socio-economic burden in reimbursement decision-making may be highly beneficial. Realizing the magnitude of the lost socio-economic contribution resulting from diseases in question could be a reasonable way for policy makers to accept a higher valuation of innovative therapies.

The importance of economic theory in the regulation of the economy

Directory of Open Access Journals (Sweden)

Nusratullin Vil Kasimovich

2011-06-01

Full Text Available The author proposes to pay more attention to the scientific results of local authors, their recommendations, including its development in the framework of non-equilibrium economics. In particular, he stressed the importance of the ideological interpretation of nonequilibrium profits and justify its source - intelligence and its carriers; formulated to them the law of large numbers, which proves that there is no special law of value separately for rent and nerentnyh industries etc.

Possibilities of using metal uranium fuel in heavy water reactors

International Nuclear Information System (INIS)

Djuric, B.; Mihajlovic, A.; Drobnjak, Dj.

1965-11-01

There are serious economic reasons for using metal uranium in heavy water reactors, because of its high density, i.e. high conversion factor, and low cost of fuel elements production. Most important disadvantages are swelling at high burnup and corrosion risk. Some design concepts and application of improved uranium obtained by alloying are promising for achievement of satisfactory stability of metal uranium under reactor operation conditions [sr

How EU Economic Integration Advances on the Way of Some Important Unions

Directory of Open Access Journals (Sweden)

PETRE PRISECARU

2015-05-01

Full Text Available Economic union and monetary union are deeply connected: two dimensions of the third stage of European integration. But achieving monetary union without a complete single market in the field of financial services proved the vulnerability of Eurozone to external shocks and the need to a further economic integration. While banking union has advanced quite fast in the last two years, capital markets union is only a project, also the fiscal union, which is the basic foundation of a true political union. A complete financial union will take a long time to accomplish due to many political, financial and bureaucratic obstacles facing such an ambitious project. Energy Union is another important project meant to remove market fragmentation, to enhance energy security and to reduce environmental impact of energy sector. Finally the political union, the last stage of European integration, the dream of many famous politicians and scholars, will be only possible on the long run as a new type of federation of nation states, provided that all components of economic union will be fully attained.

Toxicity from Metals, Old Menaces and New Threats

Directory of Open Access Journals (Sweden)

Wayne Briner

2010-12-01

Full Text Available Metals make up the bulk of the periodic table and range from the very light (e.g., beryllium to the very heavy (e.g., the actinides. Metals are important constituents of life, drive economic activity and industry, but can also be a hazard to human health. The metals can be roughly divided into three groups. The first being those metals, such as iron and zinc, that are essential to human life and have a wide therapeutic dose range. The second group of metals, such as lead, mercury, and uranium, has no known biological role and are toxic even at low doses. The third group of metals, such as selenium and manganese, has a role in maintaining human health but has a very narrow dose range that, when exceeded, produces toxic effects. [...

Health economic data in reimbursement of new medical technologies: importance of the socio-economic burden as a decision-making criterion

Directory of Open Access Journals (Sweden)

Georgi Iskrov

2016-08-01

Full Text Available Background: Assessment and appraisal of new medical technologies require a balance between the interests of different stakeholders. Final decision should take into account the societal value of new therapies.Objective: This perspective paper discusses the socio-economic burden of disease as a specific reimbursement decision-making criterion and calls for the inclusion of it as a counterbalance to the cost-effectiveness and budget impact criteria.Results/Conclusions: Socio-economic burden is a decision-making criterion, accounting for diseases, for which the assessed medical technology is indicated. This indicator is usually researched through cost-of-illness studies that systematically quantify the socio-economic burden of diseases on the individual and on the society. This is a very important consideration as it illustrates direct budgetary consequences of diseases in the health system and indirect costs associated with patient or carer productivity losses. By measuring and comparing the socio-economic burden of different diseases to society, health authorities and payers could benefit in optimizing priority setting and resource allocation.New medical technologies, especially innovative therapies, present an excellent case study for the inclusion of socio-economic burden in reimbursement decision-making. Assessment and appraisal have been greatly concentrated so far on cost-effectiveness and budget impact, marginalizing all other considerations. In this context, data on disease burden and inclusion of explicit criterion of socio-economic burden in reimbursement decision-making may be highly beneficial. Realizing the magnitude of the lost socio-economic contribution resulting from diseases in question could be a reasonable way for policy makers to accept a higher valuation of innovative therapies.

Microbial biofilms control economic metal mobility in an acid-sulfate hydrothermal system

Science.gov (United States)

Phillips-Lander, C. M.; Roberts, J. A.; Hernandez, W.; Mora, M.; Fowle, D. A.

2012-12-01

Trace metal cycling in hydrothermal systems has been the subject of a variety of geochemical and economical geology studies. Typically in these settings these elements are sequestered in sulfide and oxide mineral fractions, however in near-surface low-temperature environments organic matter and microorganisms (typically in mats) have been implicated in their mobility through sorption. Here we specifically examine the role of microbial biofilms on metal partitioning in an acid-sulfate hydrothermal system. We studied the influence of microorganisms and microbial biofilms on trace metal adsorption in Pailas de Aguas I, an acid-sulfate hot spring on the southwest flank of Rincon de la Vieja, a composite stratovolcano in the Guanacaste Province, Costa Rica. Spring waters contain high suspended loads, and are characterized by high T (79.6-89.3oC), low pH (2.6-4), and high ionic strengths (I= 0.5-0.8). Waters contain high concentrations of the biogeochemically active elements Fe (4-6 mmol/l) and SO42- (38 mmol/l), but PO43- are below detection limits (bdl). Silver, Ni, and Mo concentrations are bdl; however other trace metals are present in solution in concentrations of 0.1-0.2 mg/l Cd, 0.2-0.4 mg/l Cr and V, 0.04-1 mg/l Cu,. Preliminary 16S rRNA analyses of microorganisms in sediments reveal several species of algae, including Galderia sp., Cyanidium sp, γ-proteobacteria, Acidithiobacillus caldus, Euryarcheota, and methanogens. To evaluate microbial biofilms' impact on trace metal mobility we analyzed a combination of suspended, bulk and biofilm associated sediment samples via X-ray diffraction (XRD) and trace element sequential extractions (SE). XRD analysis indicated all samples were primarily composed of Fe/Al clay minerals (nontronite, kaolinite), 2- and 6-line ferrihydrite, goethite, and hematite, quartz, and opal-α. SE showed the highest concentrations of Cu, Mo, and V were found in the suspended load. Molybdenum was found primarily in the residual and organic

Process combinations for the manufacturing of metal-plastic hybrid parts

International Nuclear Information System (INIS)

Drossel, W-G; Lies, C; Albert, A; Haase, R; Müller, R; Scholz, P

2016-01-01

The usage of innovative lightweight materials and processing technologies gains importance in manifold industrial scopes. Especially for moving parts and mobility products the weight is decisively. The aerospace and automotive industries use light and high-strength materials to reduce weight and energy consumption and thereby improve the performance of their products. Composites with reinforced plastics are of particular importance. They offer a low density in combination with high specific stiffness and strength. A pure material substitution through reinforced plastics is still not economical. The approach of using hybrid metal-plastic structures with the principle of “using the right material at the right place” is a promising solution for the economical realization of lightweight structures with a high achievement potential. The article shows four innovative manufacturing possibilities for the realization of metal-plastic-hybrid parts. (paper)

Impact of the Sugar Import Reduction on Iran Economic Value Added (Input- Output Approach

Directory of Open Access Journals (Sweden)

Fateme Hayatgheibi

2014-06-01

Full Text Available The present study aimed at understanding interactions and linkages between the sugar sector with other economic sectors, and the influence of sugar import reduction on the economic value added. To achieve the purpose, the Input-Output table of Iran for the year 2006, Leontief inverse matrix and hypothetical extraction method were used. Based on the results, sugar industry has the most forward linkages with “Manufacture of food products and beverages,…”, “husbandry, aviculture,…”, “cultivation, horticulture”, “bakery products” and “restaurants”. This sector has also strong backward linkages with “cultivation, horticulture”, “chemicals and chemical products”, “other services”, “transport and telecommunication” and “financial services, insurance and bank”. Furthermore, either one unit increase in the final demand of sugar or one unit decrease in the sugar import increases the output of whole economic, agricultural and fishing, industry and mining, and services sectors by 2.3060, 0.6019, 1.4331, and 0.2710 unit, respectively. The increasing coefficients of the value added for the above sectors are 0.4308, 0.3700, and 0.1992 unit, respectively.

Economic indicators of the production of important fruit-specific species in Vojvodina

Directory of Open Access Journals (Sweden)

Lukač-Bulatović Mirjana

2017-01-01

Full Text Available The paper discusses the basic economic and production results of important fruit species (apple, pear, peach, sour cherry and plum on agricultural farms of Vojvodina. The aim of the research is to evaluate the most important parameters of cost-effectiveness of these productions, and propose measures to improve the existing situation. Comparative analysis clearly shows that the most cost-effective is pears production, followed by apple, cherry, peach and plum. Pear production gives the largest coverage margin per unit capacity (1,261,786 din /ha, which is 16.5% better than in apple production (1,083,160 din /ha, or about 7.8 times better in relation to plums production (161,796 din /ha. The highest coefficient of economy (3.19 is, also, recorded in the production of pear (for apples 2.94, cherry 2.27, peach 2.17 and plum 1.44. Further development of fruit production in Vojvodina involves raising intensive farms with quality fruit varieties, firmer vertical linking of producers and processors, ensurement of economic safety of producers in the long run, making of fruit producing regions, etc.

Importance of low-temperature distillation of coal for German fuel economics

Energy Technology Data Exchange (ETDEWEB)

Rosendahl, F

1942-01-01

Improved processes are available to give low-temperature distillation products economic importance. Low-temperature distillation is limited to the utilization of high-volatile nut coals and briquets. The coke formed can be used as a smokeless fuel, and the tar directly as a fuel oil. Phenols can be extracted, in order to work up the residue into fuel oil and motor fuel. Large deposits of coal in Upper Silesia and in the Saar District are suitable for low-temperature distillation.

Methods for recovering precious metals from industrial waste

Science.gov (United States)

Canda, L.; Heput, T.; Ardelean, E.

2016-02-01

The accelerated rate of industrialization increases the demand for precious metals, while high quality natural resources are diminished quantitatively, with significant operating costs. Precious metals recovery can be successfully made from waste, considered to be secondary sources of raw material. In recent years, concerns and interest of researchers for more increasing efficient methods to recover these metals, taking into account the more severe environmental protection legislation. Precious metals are used in a wide range of applications, both in electronic and communications equipment, spacecraft and jet aircraft engines and for mobile phones or catalytic converters. The most commonly recovered precious metals are: gold from jewellery and electronics, silver from X- ray films and photographic emulsions, industrial applications (catalysts, batteries, glass/mirrors), jewellery; platinum group metals from catalytic converters, catalysts for the refining of crude oil, industrial catalysts, nitric acid manufacturing plant, the carbon-based catalyst, e-waste. An important aspect is the economic viability of recycling processes related to complex waste flows. Hydrometallurgical and pyrometallurgical routes are the most important ways of processing electrical and electronic equipment waste. The necessity of recovering precious metals has opened new opportunities for future research.

Studies and research concerning BNFP. Identification and simplified modeling of economically important radwaste variables

International Nuclear Information System (INIS)

Ebel, P.E.; Godfrey, W.L.; Henry, J.L.; Postles, R.L.

1983-09-01

An extensive computer model describing the mass balance and economic characteristics of radioactive waste disposal systems was exercised in a series of runs designed using linear statistical methods. The most economically important variables were identified, their behavior characterized, and a simplified computer model prepared which runs on desk-top minicomputers. This simplified model allows the investigation of the effects of the seven most significant variables in each of four waste areas: Liquid Waste Storage, Liquid Waste Solidification, General Process Trash Handling, and Hulls Handling. 8 references, 1 figure, 12 tables

Presence and Distribution of Economically Important Potato Viruses in Montenegro

Directory of Open Access Journals (Sweden)

Jelena Zindović

2011-01-01

Full Text Available The research was carried out, in the period 2002-2004 in order to determine the presence and distribution of potato viruses at 12 different locations and on 9 different potato varieties grown in Montenegro. The research included collecting of samples in seed potato crops and testing of six economically important potato viruses: Potato leaf roll virus (PLRV, Potato virus Y (PVY, Potato virus X (PVX, Potato virus S (PVS, Potato virus A (PVA i Potato virus M (PVM. Using the direct enzyme-linked immunosorbent assay (DAS-ELISA and commercial antisera specific for six potato viruses, it was found that PVY was the most frequent virus during the three-year research period. The second frequent virus was PVS, followed by PVA, PLRV, PVM and PVX. Single and mixed infections were detected, and the most prevalent were the single infections of PVY. Also, in the period 2002-2004, PVY had the highest distribution and the number of present viruses was different at different localities and on different potato varieties. Further investigations were related to detailed characterization of the most prevalent virus (PVY, which is at the same time economically the most important one. Serological characterization of PVY was performed utilizing DAS-ELISA kit with commercial monoclonal antibodies specific for detection of the three strain groups of PVY, and the two straingroups - necrotic (PVYN/PVYNTN and common (PVYO, were identified. Necrotic strains were prevalent in 2002 and 2004, while in 2003 PVYO was the most frequent strain in virus population. The presence of stipple streak strain (PVYC was not detected in any of the testedsamples.

Farmers' breeding practices and traits of economic importance for indigenous chicken in RWANDA.

Science.gov (United States)

Mahoro, J; Muasya, T K; Mbuza, F; Mbuthia, J; Kahi, A K

2018-01-01

Data on breeding practices and traits of economic importance for the indigenous chicken (IC) were collected through personal interviews using structured questionnaires and direct observations of chicken management practices. The study was conducted from November 2015 to January 2016 in Rwamagana, Rulindo, Ruhango, Kicukiro and Muhanga districts of Rwanda. Data were collected and analysed through computation of indices, which represented a weighted average of all rankings of a specific trait. Spearman's non-parametric rank correlation was calculated for ranking of traits of economic importance to indicate the directional effects. The results on chicken ecotypes and their attributes showed that prolificacy, mature weight, disease tolerance, egg number and heat tolerance were highly preferred. The dwarf ecotype was most abundantly reared (38.84%) and considered to be significantly smaller and to have poorer growth rate, but to have better prolificacy than other indigenous chicken ecotypes. Selection of breeding cock and hen was based on disease tolerance, body weight at sexual maturity, body size and growth rate. In addition, for hen, mothering ability and egg fertility (Fer) were considered. Indices for the traits perceived by farmers as of primary economic importance were egg yield (0.093), disease tolerance (0.091), high growth rate (0.089), prolificacy (0.088), high body weight (0.087) and egg fertility (0.083). The most important traits considered by the marketers were body weight (BW), disease tolerance (Dtol), plumage colour (Pcol), egg yolk colour (EYC), meat quality (MQ), growth rate (GR) and egg yield (EY) whereas for consumers, meat quality, egg yolk colour, egg yield, body weight and growth rate were considered. Among traits perceived as important by farmers, a positive and significant correlation was found between BW and GR and Fer. Correlation was moderate for BW and prolificacy, drought tolerance (Drtol), Dtol and EYC. BW was negatively correlated with

Valuable metals - recovery processes, current trends, and recycling strategies

Energy Technology Data Exchange (ETDEWEB)

Froehlich, Peter; Lorenz, Tom; Martin, Gunther; Brett, Beate; Bertau, Martin [Institut fuer Technische Chemie, TU Bergakademie Freiberg, Leipziger Strasse 29, 09599, Freiberg (Germany)

2017-03-01

This Review provides an overview of valuable metals, the supply of which has been classified as critical for Europe. Starting with a description of the current state of the art, novel approaches for their recovery from primary resources are presented as well as recycling processes. The focus lies on developments since 2005. Chemistry strategies which are used in metal recovery are summarized on the basis of the individual types of deposit and mineral. In addition, the economic importance as well as utilization of the metals is outlined. (copyright 2017 Wiley-VCH Verlag GmbH and Co. KGaA, Weinheim)

Eco-thermodynamics. Economics and the second law

International Nuclear Information System (INIS)

Ayres, Robert U.

1998-01-01

The laws of physics, especially the first and second laws of thermodynamics, have significant implications for economic theory. The major implications of the First Law (conservation of mass/energy) are straightforward and have been discussed at length elsewhere. In brief, raw material inputs to economic processes are not 'consumed'. Having been extracted from the environment in the first place, they eventually return to the environment as wastes. The economic implications of the Second Law (entropy law) are far more subtle. There is considerable literature, initiated by the work of Georgescu-Roegen, on the supposed constraints on economic growth imposed by the fact that economic processes utilize 'low-entropy' raw materials (fossil fuels and high grade metal ores) and discard 'high entropy' wastes. However, as a practical matter the flux of available low-entropy energy (exergy) from the sun is extremely large and certainly adequate to sustain economic activity in the solar system indefinitely, even though fossil fuel and metal ore stocks may eventually be exhausted. It is argued in this paper that the real economic significance of the Second Law lies in the fact that exergy is: (1) not conserved; and (2) is a useful common measure of resource quality, as well as quantity, applicable to both materials and energy. Thus, exergy can be used to measure and compare resource inputs and outputs, including wastes and losses. This is potentially important in itself. Moreover, since exergy is not conserved it is truly consumed (i.e. used up) in economic processes. Hence, exergy is no less a 'factor of production' than labor or capital. This fact has strong implications for economic growth theory, especially with regard to assessing the role of technical progress

Spectroscopy on metal-halide lamps under varying gravity conditions

NARCIS (Netherlands)

Flikweert, A.J.

2008-01-01

Worldwide, 20% of all electricity is used for lighting. For this reason, efficient lamps are economically and ecologically important. High intensity discharge (HID) lamps are efficient lamps. The most common HID lamp these days is the metal-halide (MH) lamp. MH lamps have a good colour rendering

Institutional delivery in rural India: the relative importance of accessibility and economic status.

Science.gov (United States)

Kesterton, Amy J; Cleland, John; Sloggett, Andy; Ronsmans, Carine

2010-06-06

Skilled attendance at delivery is an important indicator in monitoring progress towards Millennium Development Goal 5 to reduce the maternal mortality ratio by three quarters between 1990 and 2015. In addition to professional attention, it is important that mothers deliver their babies in an appropriate setting, where life saving equipment and hygienic conditions can also help reduce the risk of complications that may cause death or illness to mother and child. Over the past decade interest has grown in examining influences on care-seeking behavior and this study investigates the determinants of place of delivery in rural India, with a particular focus on assessing the relative importance of community access and economic status. A descriptive analysis of trends in place of delivery using data from two national representative sample surveys in 1992 and 1998 is followed by a two-level (child/mother and community) random-effects logistical regression model using the second survey to investigate the determinants. In this investigation of institutional care seeking for child birth in rural India, economic status emerges as a more crucial determinant than access. Economic status is also the strongest influence on the choice between a private-for-profit or public facility amongst institutional births. Greater availability of obstetric services will not alone solve the problem of low institutional delivery rates. This is particularly true for the use of private-for-profit institutions, in which the distance to services does not have a significant adjusted effect. In the light of these findings a focus on increasing demand for existing services seems the most rational action. In particular, financial constraints need to be addressed, and results support current trials of demand side financing in India.

Extracting metals directly from metal oxides

International Nuclear Information System (INIS)

Wai, C.M.; Smart, N.G.; Phelps, C.

1997-01-01

A method of extracting metals directly from metal oxides by exposing the oxide to a supercritical fluid solvent containing a chelating agent is described. Preferably, the metal is an actinide or a lanthanide. More preferably, the metal is uranium, thorium or plutonium. The chelating agent forms chelates that are soluble in the supercritical fluid, thereby allowing direct removal of the metal from the metal oxide. In preferred embodiments, the extraction solvent is supercritical carbon dioxide and the chelating agent is selected from the group consisting of β-diketones, halogenated β-diketones, phosphinic acids, halogenated phosphinic acids, carboxylic acids, halogenated carboxylic acids, and mixtures thereof. In especially preferred embodiments, at least one of the chelating agents is fluorinated. The method provides an environmentally benign process for removing metals from metal oxides without using acids or biologically harmful solvents. The chelate and supercritical fluid can be regenerated, and the metal recovered, to provide an economic, efficient process. 4 figs

The Importance of Socio-Economic Versus Environmental Risk Factors for Reported Dengue Cases in Java, Indonesia.

Science.gov (United States)

Wijayanti, Siwi P M; Porphyre, Thibaud; Chase-Topping, Margo; Rainey, Stephanie M; McFarlane, Melanie; Schnettler, Esther; Biek, Roman; Kohl, Alain

2016-09-01

Dengue is a major mosquito-borne viral disease and an important public health problem. Identifying which factors are important determinants in the risk of dengue infection is critical in supporting and guiding preventive measures. In South-East Asia, half of all reported fatal infections are recorded in Indonesia, yet little is known about the epidemiology of dengue in this country. Hospital-reported dengue cases in Banyumas regency, Central Java were examined to build Bayesian spatial and spatio-temporal models assessing the influence of climatic, demographic and socio-economic factors on the risk of dengue infection. A socio-economic factor linking employment type and economic status was the most influential on the risk of dengue infection in the Regency. Other factors such as access to healthcare facilities and night-time temperature were also found to be associated with higher risk of reported dengue infection but had limited explanatory power. Our data suggest that dengue infections are triggered by indoor transmission events linked to socio-economic factors (employment type, economic status). Preventive measures in this area should therefore target also specific environments such as schools and work areas to attempt and reduce dengue burden in this community. Although our analysis did not account for factors such as variations in immunity which need further investigation, this study can advise preventive measures in areas with similar patterns of reported dengue cases and environment.

Import of renewable energy from biomass from Sweden by The Netherlands. Costs and macro-economic effects

International Nuclear Information System (INIS)

Agterberg, A.E.

1997-12-01

Import of renewable energy from biomass by the Netherlands is expected to be necessary to meet the objective for renewable energy set by the Dutch government. However, this import does not take place yet and there are many possibilities for import because several countries may serve as a supplier of biomass, there are several types of biomass available in these countries and this biomass can be transported to the Netherlands in many ways. Analysis is necessary to find out what are the best possibilities for import of renewable energy from biomass by the Netherlands. In this study the import of energy, produced in Sweden from biomass, by the Netherlands is analyzed. Sweden is selected as the biomass supplying country because it is expected to have a large potential of biomass. The aspects studied are costs and macro-economic effects (increase in employment and value added caused by the import operation). The objectives are: (1) Selection of likely export chains based on the different sources of biomass for energy in Sweden and the different energy carriers that can be exported; (1) Calculation of the costs for the delivery of 1 kWh of electricity to the main grid in the Netherlands for each chain, for the present and for the year 2010; (3) Calculation of macro-economic effects (changes in employment and value added) in Sweden and the Netherlands for the import of 10 PJ of energy from biomass per year for each chain; (4) Comparison of the chains based on both costs and macro-economic effects; and (5) Discussion of the method and recommendations for simplifications for application in situations with a lower data quality. 45 refs

Human capital demand in Brazil: The effects of adjustment cost, economic growth, exports and imports

Directory of Open Access Journals (Sweden)

Joilson Dias

2015-01-01

Full Text Available The objective of this paper is to learn about the effects of the adjustment costs, economic growth, imports and exports on human capital labor demand. The dynamic model proposed by Sargent (1978 was adjusted to consider three types of human capital: (a one with fundamental education (1–8 years of schooling; (b one with secondary education level (9–11 years of education; (c and one with tertiary education level (12 years or more of schooling. Using state level panel data, the dynamic econometrics estimates showed the following results: (i the labor market adjustment costs are very higher; (ii the adjustment cost for the human capital with intermediary education level is the highest one compared to the others; (iii the states’ economic growth favor those with superior education; (iv the imports seems to favor the demand for those with intermediate education levels; (v the degree of openness does show some weak effect on the demand for human capitals with intermediate education. In sum, the growing demand for human capital with some superior education seems to be more associated to its lower adjustment cost and economic growth; the non-significance of real wage elasticity and high adjustment cost seems to indicate that the human capital with intermediate knowledge is in short supply; hence, economic education policy that increases supply of such human capital are in need.

Spatiotemporal Analysis of Heavy Metal Water Pollution in Transitional China

Directory of Open Access Journals (Sweden)

Huixuan Li

2015-07-01

Full Text Available China’s socioeconomic transitions have dramatically accelerated its economic growth in last three decades, but also companioned with continuous environmental degradation. This study will advance the knowledge of heavy metal water pollution in China from a spatial–temporal perspective. Specifically, this study addressed the following: (1 spatial patterns of heavy metal water pollution levels were analyzed using data of prefecture-level cities from 2004 to 2011; and (2 spatial statistical methods were used to examine the underlying socioeconomic and physical factors behind water pollution including socioeconomic transitions (industrialization, urbanization, globalization and economic development, and environmental characteristic (natural resources, hydrology and vegetation coverage. The results show that only Cr pollution levels increased over the years. The individual pollution levels of the other four heavy metals, As, Cd, Hg, and Pb, declined. High heavy metal water pollution levels are closely associated with both anthropogenic activities and physical environments, in particular abundant mineral resources and industrialization prosperity. On the other hand, economic development and urbanization play important roles in controlling water pollution problems. The analytical findings will provide valuable information for policy-makers to initiate and adjust protocols and strategies for protecting water sources and controlling water pollution; thus improving the quality of living environments.

Economic Indicators Selected Countries.

Science.gov (United States)

1987-12-01

DEFENCE I ECONOMIC INDICATORS SELECTED COUNTRIES DECEMBER QUARTER 1987 . ’-H ISSUED BY MANPOWER POLICY & STRATEGIES BRANCH " "’ :.S S ’,1l f ,am -m mW...100 Sour:e: Main Economic Indicators (OECD) Manufactured Basic Metal Year Goods Chemicals Metals Products 1980 100 100 100 100 1981 110 117 102 107...Earnings of all 1982 1986 7.4 Male Employees (a) Aug 1986 Aug 1987 4.8 Hourly Wace Rates 3 1979 1987 lt.2 Garden Island 1983 1987 6.7 Dockyards Dec

The Role and Importance of Local Economic Development in Urban Development: A Case of Harare

Directory of Open Access Journals (Sweden)

Gladys Mandisvika

2015-12-01

Full Text Available The study assessed the role and importance of Local Economic Development as a means of enhancing urban development paying particular attention to the regulators of Local Economic Development in Harare. Local Economic Development is a process which encourages partners from the community, public sector, private sector and non-governmental sectors to work collectively to create better conditions for economic growth and employment generation with the aim of improving the locality economic future and the quality of life for all citizens. The study was premised on the theory of competitive advantage which puts up that prosperity and wealth creation is determined by microeconomic factors and that prosperity means increasing the standards of living for the local people and ultimately their quality of life. Primary data for the research was gathered through observation and key informant interviews. Data on key stakeholders understanding on the concept of Local Economic Development, how it is being practised and how the current regulatory framework enhance or impinge on local people’s participation in Local Economic Development was collected. Secondary data was also collected from Harare’s 2014 budget, census and existing forward plans. The study revealed that the practice of Local Economic Development in Harare is biased towards the setting aside of land zoned for industrial and commercial uses and implementation of development control parameters. Small to Medium Enterprises and the informal sector have also been identified as the major forms of Local Economic Development that citizens are involved in. However, the study revealed that proper policy frameworks which guide practice of Local Economic Development initiatives were missing

Control of orphan sources. Import to and transport through Slovenia

International Nuclear Information System (INIS)

Cesarek, J.; Vokal Nemec, B.

2007-01-01

Orphan sources are radioactive sources which are not under regulatory control, either because they have never been under regulatory control, or because they have been abandoned, lost, misplaced, stolen or transferred without proper authorisation. The issue of orphan sources is not a new one but the situation has been highlighted more and more in the last ten years. One of the most important international milestones in this regard was the conference in Dijon, France in 1998. The orphan sources have become an international problem due to steady increase in international trade which made impossible to control every transfer of goods between countries. Shipments of metal scrap, either national or international, could comprise orphan sources which had come into metal stream. The consequences of such events vary greatly: from contaminated metal just above exemption levels to a melting of volatile radionuclides of significant activity which may cause enormous remediation costs. In addition, the phenomenon of deliberate abuse of nuclear material and radioactive material or previous accidents with found orphan sources worldwide and fatalities have made this issue even more provoking. In Slovenia, no such drastic events have occurred so far. Since 1991 there have been a few meltings of cobalt-60 sources with only economic impact. On several occasions, Italy - the country with strict import control - has detected elevated radiation and denied shipments of scrap metal. They had originated either from Slovenia or from other countries, mostly from former Yugoslav republics. The Slovenian experience shows that majority of cases is related to import of scrap metal in Slovenia or to transit of such material through Slovenia. These orphan sources have originated from past industrial activities or have been under no or weak regulatory control in their countries of origin. In order to prevent inadvertent movement and illicit trafficking of nuclear material and radioactive sources some

Remediation of Steel Slag on Acidic Soil Contaminated by Heavy Metal

OpenAIRE

Gu, Haihong; Li, Fuping; Guan, Xiang; Li, Zhongwei; Yu, Qiang

2013-01-01

The technology of in situ immobilization with amendments is an important measure that remediates the soil contaminated by heavy metal, and selecting economical and effective modifier is the key. The effects and mechanism of steel slag, the silicon-rich alkaline by-product which can remediate acidic soil contaminated by heavy metal, are mainly introduced in this paper to provide theory inferences for future research. Firstly, the paper analyzes current research situation of in situ immobilizat...

The Role of Economic Uncertainty on the Block Economic Value - a New Valuation Approach / Rola Czynnika Niepewności Przy Obliczaniu Wskaźnika Rentowności - Nowe Podejście

Science.gov (United States)

Dehghani, H.; Ataee-Pour, M.

2012-12-01

The block economic value (EV) is one of the most important parameters in mine evaluation. This parameter can affect significant factors such as mining sequence, final pit limit and net present value. Nowadays, the aim of open pit mine planning is to define optimum pit limits and an optimum life of mine production scheduling that maximizes the pit value under some technical and operational constraints. Therefore, it is necessary to calculate the block economic value at the first stage of the mine planning process, correctly. Unrealistic block economic value estimation may cause the mining project managers to make the wrong decision and thus may impose inexpiable losses to the project. The effective parameters such as metal price, operating cost, grade and so forth are always assumed certain in the conventional methods of EV calculation. While, obviously, these parameters have uncertain nature. Therefore, usually, the conventional methods results are far from reality. In order to solve this problem, a new technique is used base on an invented binomial tree which is developed in this research. This method can calculate the EV and project PV under economic uncertainty. In this paper, the EV and project PV were initially determined using Whittle formula based on certain economic parameters and a multivariate binomial tree based on the economic uncertainties such as the metal price and cost uncertainties. Finally the results were compared. It is concluded that applying the metal price and cost uncertainties causes the calculated block economic value and net present value to be more realistic than certain conditions.

Importance of Economic Evaluation in Health Care: An Indian Perspective.

Science.gov (United States)

Dang, Amit; Likhar, Nishkarsh; Alok, Utkarsh

2016-05-01

Health economic studies provide information to decision makers for efficient use of available resources for maximizing health benefits. Economic evaluation is one part of health economics, and it is a tool for comparing costs and consequences of different interventions. Health technology assessment is a technique for economic evaluation that is well adapted by developed countries. The traditional classification of economic evaluation includes cost-minimization, cost-effectiveness analysis, cost-utility analysis, and cost-benefit analysis. There has been uncertainty in the conduct of such economic evaluations in India, due to some hesitancy with respect to the adoption of their guidelines. The biggest challenge in this evolutionary method is lack of understanding of methods in current use by all those involved in the provision and purchasing of health care. In some countries, different methods of economic evaluation have been adopted for decision making, most commonly to address the question of public subsidies for the purchase of medicines. There is limited evidence on the impact of health insurance on the health and economic well-being of beneficiaries in developing countries. India is currently pursuing several strategies to improve health services for its population, including investing in government-provided services as well as purchasing services from public and private providers through various schemes. Prospects for future growth and development in this field are required in India because rapid health care inflation, increasing rates of chronic conditions, aging population, and increasing technology diffusion will require greater economic efficiency into health care systems. Copyright © 2016 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Trends And Economic Assessment Of Integration Processes At The Metal Market

Directory of Open Access Journals (Sweden)

Olga Aleksandrovna Romanova

2015-03-01

Full Text Available The article discussed the integration process from the perspective of three dimensions that characterize the corresponding increase in the number and appearance of new relationships; strength, character, and stability of emerging communications; dynamics and the appropriate form of the process. In the article, trends of development of integration processes in metallurgy are identified, identification of five stages of development in Russian metal trading are justified. We propose a step by step way to implement the integration process, developed a methodical approach to assessing the feasibility of economic integration processes steel producers and steel traders, including three consecutive stages of its implementing respectively, the principles of reflexive control, entropy approach, the traditional assessment of mergers and acquisitions. The algorithm for the practical realization of the author’s approach, which allows to identify the optimal trajectory of the integration process as a series of horizontal and vertical integration steps is developed.

The importance of capital cost reduction in improving nuclear economics

International Nuclear Information System (INIS)

Langmo, A.; Braun, C.

1996-01-01

In the developed countries having existing nuclear programs, the situation necessitates lower total power generation cost. The restructuring of utility industry due to the deregulation causes to reorganize the ownership of some nuclear plants, and the overall economics of nuclear plants in relation to their local competition is reexamined. The reluctance to make any new long term capital cost commitment arises, and it makes new plant construction less likely in near future, and plant upgrading and improvement to be put to intense scrutiny. The capital cost recovery in existing nuclear plants in USA is discussed. It is important to recognize that there is very little that can be done to affect already expended capital, and only that can be done is to improve plant capacity factors, besides write-off. The roles of architects and engineers in improved plant economics are now evaluated by the various organizations which are interested in the participation in new nuclear industry reorganization and restructuring. The reduction of operation and maintenance costs and capital investment, and the improvement of capacity factor are reported. In new ALWR construction program, architects and engineers can significantly support the control of plant capital costs by the selection of the plant design and the sites, and the strategies of procurement and contract, construction schedule and others. (K.I.)

The importance of biological factors affecting trace metal concentration as revealed from accumulation patterns in co-occurring terrestrial invertebrates

Energy Technology Data Exchange (ETDEWEB)

Hendrickx, Frederik; Maelfait, Jean-Pierre; Bogaert, Nicolas; Tojal, Catarina; Du Laing, Gijs; Tack, Filip M.G.; Verloo, Marc G

2004-02-01

As physicochemical properties of the soil highly influence the bioavailable fraction of a particular trace metal, measured metal body burdens in a particular species are often assumed to be more reliable estimators of the contamination of the biota. To test this we compared the Cd, Cu and Zn content of three spiders (generalist predators) and two amphipods (detritivores), co-occurring in seven tidal marshes along the river Schelde, between each other and with the total metal concentrations and the concentrations of four sequential extractions of the soils. Correlations were significant in only one case and significant sitexspecies interactions for all metals demonstrate that factors affecting metal concentration were species and site specific and not solely determined by site specific characteristics. These results emphasize that site and species specific biological factors might be of the utmost importance in determining the contamination of the biota, at least for higher trophic levels. A hypothetical example clarifies these findings. - Site and species specific biological factors are important in determining contamination of biota.

Effect of Heavy Metals in Plants of the Genus Brassica

Science.gov (United States)

Mourato, Miguel P.; Moreira, Inês N.; Leitão, Inês; Pinto, Filipa R.; Sales, Joana R.; Louro Martins, Luisa

2015-01-01

Several species from the Brassica genus are very important agricultural crops in different parts of the world and are also known to be heavy metal accumulators. There have been a large number of studies regarding the tolerance, uptake and defense mechanism in several of these species, notably Brassica juncea and B. napus, against the stress induced by heavy metals. Numerous studies have also been published about the capacity of these species to be used for phytoremediation purposes but with mixed results. This review will focus on the latest developments in the study of the uptake capacity, oxidative damage and biochemical and physiological tolerance and defense mechanisms to heavy metal toxicity on six economically important species: B. juncea, B. napus, B. oleracea, B. carinata, B. rapa and B. nigra. PMID:26247945

The Danish fabricated metal industry:

DEFF Research Database (Denmark)

Hansen, Teis

2010-01-01

This paper aims to contribute to the knowledge on innovation processes in low- and medium-low-tech industries. Today, industries characterised as high-tech are perceived to be central to economic development, as the research intensity shields them from competition from low-wage countries....... This is less the case for low-tech industries, but their economic importance continues to be large, however. It is thus interesting to analyse how they manage to remain competitive. The analysis focuses on a case study of the fabricated metal industry by identifying the innovation strategies followed by firms...... located in a part of Jutland, where this industry has experienced growth. It is found that the ability to create tailor-made solutions is central to the competitiveness of these medium-low-tech firms. Knowledge is thus highly important, yet in different ways than for high-tech industries. This illustrates...

Ethno-botanical studies of economically important plants from mountainous region of gilgit-baltistan, pakistan

International Nuclear Information System (INIS)

Awan, M.R.; Khan, A.; Jamal, Z.

2013-01-01

Ethno botanical studies of economically important plants from Gilgit-Baltistan were conducted during 2003-2006. Extensive field trips were conducted for collection of plants according to their flowering and fruiting period and ethno-botanical data obtained during field trips. This area has many ecological zones, lies between 3000ft to 29000ft above sea level. Due to difference in soil, climate, moisture contents, latitude, longitude, altitude and topography, great diversity of plants of economic importance were found in these areas. Locals belonging to different ethnic groups, like, sayed, Gujjar, Mughal, Sheen, Yaskuin, Wakhi, Tajik, Khowar, etc., are settled there. They have distinct life styles, beliefs, traditions, life style and culture. There is a great shortage medical treatment therefore locals use indigenous plants for treatment of various diseases at local level. Folklore treatment is considered the cheapest source of curing diseases at local level. Information regarding ethno-medicinal importance was obtained from local inhabitants of old age. These plants have been utilised over many generations by various ethnic groups. It was found that indigenous medicinal flora of the area is quite rich and is diverse, due to the difference in altitude, climate and other topographic conditions. It is expected that this paper will be beneficial for locals, students, researchers, farmers, foresters and general public alike. (author)

Research Progress of Artificial Forest in the Remediation of Heavy Metal Contaminated Soils

Science.gov (United States)

Jiafang, MA; Guangtao, MENG; Liping, HE; Guixiang, LI

2017-01-01

(1) Remediation of soil contaminated by heavy metals has become a hot topic in the world, and phytoremediation technology is the most widely used. (2) In addition to traditional economic benefits, ecological benefits of artificial forest have been more and more important, which are very helpful to soil polluted with heavy metals in the environment. (3) The characteristics of heavy metal pollution of soil and plantations of repair mechanism have been reviewed, and the current mining areas, wetlands, urban plantations on heavy metal elements have enriched the research results. The purpose is to find a new path for governance of heavy metal soil pollution.

Trees of Laos and Vietnam: a field guide to 100 economically or ecologically important species

NARCIS (Netherlands)

Sam, Hoang Van; Nanthavong, Khamseng; Keßler, P.J.A.

2004-01-01

This field guide to 100 economically or ecologically important tree species from Laos and Vietnam enables the user to identify the included taxa with user-friendly keys. It includes scientific names, botanical descriptions of families, genera, and species. Specific information on distribution,

Breeding programs for the main economically important traits of zebu dairy cattle

OpenAIRE

Ariosto Ardila Silva

2010-01-01

In tropical regions, Gyr and Guzerat breeds (Bos indicus) are most explored for dairy industry and are much more adapted to climate. Gyr and Guzerat are Zebu breeds very common in Brazil and they are being used to generate Bos taurus x Bos indicus crosses in order to combine good production, heat and parasite tolerance on the tropics. Breeding programs for the main economically important traits of Zebu dairy cattle have been recently introduced in Brazil and is based on the use of genetically...

Recycling Potentials of Critical Metals-Analyzing Secondary Flows from Selected Applications

Directory of Open Access Journals (Sweden)

Till Zimmermann

2014-03-01

Full Text Available Metal mobilization in general, as well as the number of metals used in products to increase performance and provide sometimes unique functionalities, has increased steadily in the past decades. Materials, such as indium, gallium, platinum group metals (PGM, and rare earths (RE, are used ever more frequently in high-tech applications and their criticality as a function of economic importance and supply risks has been highlighted in various studies. Nevertheless, recycling rates are often below one percent. Against this background, secondary flows of critical metals from three different end-of-life products up to 2020 are modeled and losses along the products’ end-of-life (EOL chain are identified. Two established applications of PGM and RE–industrial catalysts and thermal barrier coatings–and CIGS photovoltaic cells as a relatively new product have been analyzed. In addition to a quantification of future EOL flows, the analysis showed that a relatively well working recycling system exists for PGM-bearing catalysts, while a complete loss of critical metals occurs for the other applications. The reasons include a lack of economic incentives, technologically caused material dissipation and other technological challenges.

Applications of inorganic mass spectrometry in metal analysis of high-tech industry

International Nuclear Information System (INIS)

Ling Yongjian; Wang Shimin; Li Peiling; Chen Lizhen

2007-01-01

The metals in the nature are closely related to the progress of human culture and economic activities. Various kinds of metals are continuously being applied to new processes and products. During the effect by biogeochemical cycle, metals were released to environmental compartments, such as air, water, soil, and living organisms. The deficiency in knowledge, poor management, greedy, and bad intention usually leads to serious environmental pollution, eco-environment damage, and human poisoning. Effective analysis of metal concentrations and species during economic activities and eco-environment is an important research and survey subject. Internationally, the establishment of high-tech industrial park has become the major means to simultaneously improve living quality and broaden economic activity. High-tech industry uses metals. It is mandatory to control the distribution of metals in feed, process, product, waste, environment, and the life-cycle. This report is based on our experience with inorganic mass spectrometry focusing on the use of secondary ion mass spectrometry (SIMS) and inductively-coupled mass spectrometry (ICP-MS) in metal analysis of high-tech industrial parts. The report includes (1) The use of SIMS for analyzing impurity in depth and on surface demonstrates the importance of integrating trace metal, depth profile, micro-area, and surface analyses. (2) Survey ambient heavy metals (As, Be, Cd, Dr, Hg, Mn, Ni and Pb) around industrial parks and compare the findings to stack heavy metals. The results demonstrate that ICP-MS is indispensable to help reveal heavy metal distribution in industrial park ambient air and clarify suspected polluting sources. (3) Research and develop analytical method to determine metal impurities (Na, K, Mg, Ca, Cu, Fe, Mn, Li and Al) in photoresist. The method uses a novel nitric acid digestion technique to convert photoresist into carbon dioxide and water, followed by ICP-MS analysis of high-purity nitric acid recovery

Measurement and Evaluation of Ecological Risk of Heavy Metals in Surface Sediments of Pars Special Economic Energy Zone

OpenAIRE

Arash Haghshenas; Masoud Hatami-manesh; Mohsen Mirzaei; MirMehrdad Mir Sanjari; Parisa Hossein Khezri

2017-01-01

Background: Today, heavy metals pollution in aquatic ecosystems is one of the most important global environmental problems. Because this metals have characteristics such as chemical stability, low degradability and bioaccumulation ability at different levels of the food chain cause the abundant ecological risks for organisms. Therefore, this study investigates the concentration of heavy metals (mercury, cadmium, lead, chromium, copper, nickel, zinc and iron) and ecological risk assessment of ...

Mother's education is the most important factor in socio-economic inequality of child stunting in Iran.

Science.gov (United States)

Emamian, Mohammad Hassan; Fateh, Mansooreh; Gorgani, Neman; Fotouhi, Akbar

2014-09-01

Malnutrition is one of the most important health problems, especially in developing countries. The present study aimed to describe the socio-economic inequality in stunting and its determinants in Iran for the first time. Cross-sectional, population-based survey, carried out in 2009. Using randomized cluster sampling, weight and height of children were measured and anthropometric indices were calculated based on child growth standards given by the WHO. Socio-economic status of families was determined using principal component analysis on household assets and social specifications of families. The concentration index was used to calculate socio-economic inequality in stunting and its determinants were measured by decomposition of this index. Factors affecting the gap between socio-economic groups were recognized by using the Oaxaca-Blinder decomposition method. Shahroud District in north-eastern Iran. Children (n 1395) aged economic inequality in stunting was -0·1913. Mother's education contributed 70 % in decomposition of this index. Mean height-for-age Z-score was -0·544 and -0·335 for low and high socio-economic groups, respectively. Mother's education was the factor contributing most to the gap between these two groups. There was a significant socio-economic inequality in the studied children. If mother's education is distributed equally in all the different groups of Iranian society, one can expect to eliminate 70 % of the socio-economic inequalities. Even in high socio-economic groups, the mean height-for-age Z-score was lower than the international standards. These issues emphasize the necessity of applying new interventions especially for the improvement of maternal education.

The role and importance of diversified farming enterprises in socio-economic development of rural areas

OpenAIRE

Askarov N.

2018-01-01

In this article considered the necessity of the organization and development of diversified farming enterprises, their role and importance in the practical solution of socio-economic problems of rural areas. The issues of the development of farms are important in increasing the employment and income of the rural population, as well as in addressing the social problems associated with them. For the period 2013-2016. 352,015 new jobs were created. Today one of the most effective factors...

Role of oil imports in economic development

International Nuclear Information System (INIS)

Madduri, V.B.N.S.; Radhika, G.

1990-01-01

This paper reports that energy has a vital role to play in a developing economy. The process of industrialization calls for continuous increase in energy use. In general, the greater the use of energy, the higher the economy is placed in the order of developed countries. Countries with high per-capita income have a high consumption level of energy too. On a per-capita basis, energy consumed in U.S.A. is 51.7 barrels of oil equivalent per year while in India, it is 0.9 barrels of oil equivalent only. Therefore, energy consumption, industrial development and economic growth are interlinked. Energy became a significant part in the process of development. In the case of developing countries, any change in the price of oil has a negative effect on economic growth. It was stated in one of the Oil and Natural Gas Commission reports that a fivefold increase in the international price of oil, in real terms, over the past 15 years has had profound effects on balance of payments and growth prospects in developing countries

Perfil socioeconômico de jovens metalúrgicos Socio-economic profile of young metalworkers

Directory of Open Access Journals (Sweden)

Iram Jácome Rodrigues

2005-11-01

Full Text Available Este artigo analisa os dados de pesquisa realizada com trabalhadores da indústria automobilística na região do ABC, com destaque para aqueles em faixa etária entre 19 e 29 anos, efetuando uma comparação entre o perfil socioeconômico desses jovens metalúrgicos e o de seus colegas de trabalho com 30 anos de idade ou mais. Destacando a heterogeneidade que caracteriza a juventude, os autores mostram as diferenças existentes não só entre os trabalhadores mais jovens e os mais velhos, mas também entre os jovens metalúrgicos e aqueles investigados em pesquisas anteriores. A análise mostrou que, se em determinados aspectos a situação dos jovens trabalhadores em montadoras é melhor do que a de outros jovens inseridos no mercado de trabalho e, em todos os sentidos, superior à dos jovens que permanecem à margem do trabalho, seja como desempregados, seja como subempregados, isso não significa, contudo, que não apresentem insatisfações e temores diante das incertezas do mundo globalizado.This paper analyses data from a research done with automobile workers in the ABC region (in the State of São Paulo, with special emphasis on those who are between 19 and 29 years of age. A comparison of their socio-economic profile was made with that of their colleagues who are thirty or over. Pointing out the heterogeneity that characterizes youth, the text shows the existing differences, not only between the younger and the older metal workers, but also between the young metal workers and other youths that took part in previous researches. The analysis shows that, to a certain extent, those working in the automobile industry are better off than that other youths in the labor market in general, and in all senses, their situation is a lot superior to that of youths who have not been absorbed by the market, either because they are unemployed, or because they are underemployed. This does not mean, however, that these young metal workers are satisfied or

Inspection and Reconstruction of Metal-Roof Deformation under Wind Pressure Based on Bend Sensors

OpenAIRE

Yang, Liman; Cui, Langfu; Li, Yunhua; An, Chao

2017-01-01

Metal roof sheathings are widely employed in large-span buildings because of their light weight, high strength and corrosion resistance. However, their severe working environment may lead to deformation, leakage and wind-lift, etc. Thus, predicting these damages in advance and taking maintenance measures accordingly has become important to avoid economic losses and personal injuries. Conventionally, the health monitoring of metal roofs mainly relies on manual inspection, which unavoidably com...

Mathematics in Finance and Economics: Importance of Teaching Higher Order Mathematical Thinking Skills in Finance

Science.gov (United States)

Tularam, Gurudeo Anand

2013-01-01

This paper addresses the importance of teaching mathematics in business and finance schools of tertiary institutions of Australia. The paper explores the nature of thinking and reasoning required for advancement financial or economic studies involves the use of higher order thinking and creativity skills (HOTS) for teaching in mathematics classes.…

Monitoring of trace metals and pharmaceuticals as anthropogenic and socio-economic indicators of urban and industrial impact on surface waters

Science.gov (United States)

Vystavna, Yuliya

2014-05-01

The research focuses on the monitoring of trace metals and pharmaceuticals as potential anthropogenic indicators of industrial and urban influences on surface water in poorly gauged transboundary Ukraine/Russia region. This study includes analysis of tracers use for the indication of water pollution events, including controlled and emerging discharges, and discussion of the detection method of these chemicals. The following criteria were proposed for the evaluation of indicators: specificity (physical chemical properties), variability (spatial and temporal) and practicality (capacity of the sampling and analytical techniques). The combination of grab and passive water sampling (i.e. DGT and POCIS) procedure was applied for the determination of dissolved and labile trace metals (Ag, Cd, Cr, Cu, Ni, Pb and Zn) and pharmaceuticals (carbamazepine, diazepam, paracetamol, caffeine, diclofenac and ketoprofen). Samples were analysed using ICP - MS (trace metals) and LC-MS/MS ESI +/- (pharmaceuticals). Our results demonstrate the distinctive spatial and temporal patterns of trace elements distribution along an urban watercourse. Accordingly, two general groups of trace metals have been discriminated: 'stable' (Cd and Cr) and 'time-varying' (Cu, Zn, Ni and Pb). The relationship Cd >> Cu > Ag > Cr ≥ Zn was proposed as an anthropogenic signature of the industrial and urban activities pressuring the environment from point sources (municipal wastewaters) and the group Pb - Ni was discussed as a relevant fingerprint of the economic activity (industry and transport) mainly from non-point sources (run-off, atmospheric depositions, etc.). Pharmaceuticals with contrasting hydro-chemical properties of molecules (water solubility, bioaccumulation, persistence during wastewater treatment processes) were discriminated on conservative, labile and with combined properties in order to provide information on wastewater treatment plant efficiency, punctual events (e.g. accidents on sewage

Economical characteristics of base types of minerals. 1. Metallic minerals

International Nuclear Information System (INIS)

Khasanov, A.Kh.

1990-01-01

Metallic minerals is raw materials base of black and colour metallurgy. In this article of book author describes the group of black metals (iron, manganese, chromium), group of tempers (titanium, vanadium, nickel, cobalt, molybdenum, tungsten), colour metals (copper, lead, zinc, aluminium, tin, mercury, antimony, bismuth) and etc.

Oligarchic forests of economic plants in amazonia: utilization and conservation of an important tropical resource.

Science.gov (United States)

Peters, C M; Balick, M J; Kahn, F; Anderson, A B

1989-12-01

Tropical forests dominated by only one or two tree species occupy tens of millions of hectares in Ammonia In many cases, the dominant species produce fruits, seeds, or oils of economic importance. Oligarchic (Gr. oligo = few, archic = dominated or ruled by) forests of six economic species, i. e., Euterpe oleracea, Grias peruviana, Jessenia bataua, Mauritia flexuosa, Myrciaria dubia, and Orbignya phalerata, were studied in Brazil and Peru Natural populations of these species contain from 100 to 3,000 conspecific adult trees/ha and produce up to 11.1 metric tons of fruit/hd/yr. These plant populations are utilized and occasionally managed, by rural inhabitants in the region. Periodic fruit harvests, if properly controlled have only a minimal impact on forest structure and function, yet can generate substantial economic returns Market-oriented extraction of the fruits produced by oligarchic forests appears to represent a promising alternative for reconciling the development and conservation of Amazonian forests.

Characterization of Toxic Metals in Tobacco, Tobacco Smoke, and Cigarette Ash from Selected Imported and Local Brands in Pakistan

Directory of Open Access Journals (Sweden)

Huma Ajab

2014-01-01

Full Text Available In this study, concentrations of Cd, Ni, Pb, and Cr were determined in tobacco, tobacco smoke-condensate, and cigarette ash for selected brands used in Pakistan. Smoking apparatus was designed for metal extraction from cigarette smoke. Samples were digested through microwave digester and then analyzed by flame atomic absorption spectrophotometer (FAAS. Higher concentration of Ni was detected in imported brands than the counterparts in the local brands. Pb levels were however higher in local brands while significant concentration of Cd was observed in both brands. For Cr, the level in tobacco of local brands was higher than their emitted smoke, whereas imported brands showed higher level in smoke than in tobacco. The cigarette ash retained 65 to 75% of the metal and about 25 to 30% went into the body. While this study revealed the serious requirement to standardize the manufacturing of tobacco products, more importantly is the urgent need for stronger enforcements to put in place to alert the general population about the hazardous effects of cigarettes and the health risks associated with these toxic metals.

Measuring socio-economic position in dietary research: is choice of socio-economic indicator important?

Science.gov (United States)

Turrell, Gavin; Hewitt, Belinda; Patterson, Carla; Oldenburg, Brian

2003-04-01

To examine the association between socio-economic position (SEP) and diet, by assessing the unadjusted and simultaneously adjusted (independent) contributions of education, occupation and household income to food purchasing behaviour. The sample was randomly selected using a stratified two-stage cluster design, and the response rate was 66.4%. Data were collected by face-to-face interview. Food purchasing was examined on the basis of three composite indices that reflected a household's choice of grocery items (including meat and chicken), fruit and vegetables. Brisbane City, Australia, 2000. : Non-institutionalised residents of private dwellings located in 50 small areas (Census Collectors Districts). When shopping, respondents in lower socio-economic groups were less likely to purchase grocery foods that were high in fibre and low in fat, salt and sugar. Disadvantaged groups purchased fewer types of fresh fruits and vegetables, and less often, than their counterparts from more advantaged backgrounds. When the relationship between SEP and food purchasing was examined using each indicator separately, education and household income made an unadjusted contribution to purchasing behaviour for all three food indices; however, occupation was significantly related only with the purchase of grocery foods. When education and occupation were simultaneously adjusted for each other, the socio-economic patterning with food purchase remained largely unchanged, although the strength of the associations was attenuated. When household income was introduced into the analysis, the association between education, occupation and food purchasing behaviour was diminished or became non-significant; income, however, showed a strong, graded association with food choice. The food purchasing behaviours of socio-economically disadvantaged groups were least in accord with dietary guideline recommendations, and hence are more consistent with greater risk for the development of diet

Metal Separations and Recovery in the Mining Industry

Science.gov (United States)

Izatt, Steven R.; Bruening, Ronald L.; Izatt, Neil E.

2012-11-01

Molecular Recognition Technology (MRT) plays an important role in the hydrometallurgical processing dissolved entities in solutions in the mining industry. The status of this industry with respect to sustainability and environmental issues is presented and discussed. The roles of MRT and ion exchange in metal separation and recovery processes in the mining industry are discussed and evaluated. Examples of MRT separation processes of interest to the mining community are given involving gold, cobalt purification by extraction of trace cadmium, rhenium, and platinum group metals (PGMs). MRT processes are shown to be sustainable, economically viable, energy efficient, and environmentally friendly, and to have a low carbon footprint.

Trees of Laos and Vietnam: a field guide to 100 economically or ecologically important species

OpenAIRE

Sam, Hoang Van; Nanthavong, Khamseng; Keßler, P.J.A.

2004-01-01

This field guide to 100 economically or ecologically important tree species from Laos and Vietnam enables the user to identify the included taxa with user-friendly keys. It includes scientific names, botanical descriptions of families, genera, and species. Specific information on distribution, habitat, ecology, and uses has been compiled. All specimens examined have been listed.

Damage clustering in metals: Importance, advances and challenges

International Nuclear Information System (INIS)

Nordlund, K.; Sand, A.E.; Granberg, F.; Levo, E.; Djurabekova, F.

2016-01-01

The damage produced in metals has traditionally been primarily characterized in terms of the total damage production, which typically is first estimated with the dpa number. As discussed in previous meetings of this CRP, the dpa is not actually very well suited for typical dense metals, since the number it gives is typically about 3 times larger than the number of actual defects produced, and 30 times smaller than the actual number of defects produced. Hence we developed the improved arc-dpa and rpa standards, that give in a simple analytical form a defect number that does correspond well to MD and experimental data. Section 2 summarizes the development of the arc-dpa and rpa standards. In sections 3 and 4 we discuss the role of damage clustering in damage production

The importance of atomic and molecular correlation on the bonding in transition metal compounds

Science.gov (United States)

Bauschlicher, Charles W., Jr.; Langhoff, Stephen R.; Walch, Stephen P.

1986-01-01

The determination of accurate spectroscopic parameters for molecular systems containing transition metal atoms is shown to require extensive data sets and a high level correlation treatment, and techniques and their limitations are considered. Extensive results reported on the transition metal atoms, hydrides, oxides, and dimers makes possible the design of a calculation to correctly describe the mixing of different atomic asymptotes, and to give a correct balance between molecular bonding and exchange interactions. Examples considered include the dipole moment of the 2Delta state of NiH, which can help determine the mixture of 3d(8)4s(2) and 3d(9)4s(1) in the NiH wavefunction, and the bonding in CrO, where an equivalent description of the relative energies associated with the Cr 3d-3d atomic exchange and the Cr-O bond is important.

STAR FORMATION AT VERY LOW METALLICITY. V. THE GREATER IMPORTANCE OF INITIAL CONDITIONS COMPARED TO METALLICITY THRESHOLDS

International Nuclear Information System (INIS)

Jappsen, Anne-Katharina; Low, Mordecai-Mark Mac; Glover, Simon C. O.; Klessen, Ralf S.; Kitsionas, Spyridon

2009-01-01

The formation of the first stars out of metal-free gas appears to result in stars at least an order of magnitude more massive than in the present-day case. We here consider what controls the transition from a primordial to a modern initial mass function. It has been proposed that this occurs when effective metal line cooling occurs at a metallicity threshold of Z/Z sun > 10 -3.5 . We study the influence of low levels of metal enrichment on the cooling and collapse of initially ionized gas in small protogalactic halos using three-dimensional, smoothed particle hydrodynamics simulations with particle splitting. Our initial conditions represent protogalaxies forming within a previously ionized H II region that has not yet had time to cool and recombine. These differ considerably from those used in simulations predicting a metallicity threshold, where the gas was initially cold and only partially ionized. In the centrally condensed potential that we study here, a wide variety of initial conditions for the gas yields a monolithic central collapse. Our models show no fragmentation during collapse to number densities as high as 10 5 cm -3 , for metallicities reaching as high as 10 -1 Z sun , far above the threshold suggested by previous work. Rotation allows for the formation of gravitationally stable gas disks over large fractions of the local Hubble time. Turbulence slows the growth of the central density slightly, but both spherically symmetric and turbulent initial conditions collapse and form a single sink particle. We therefore argue that fragmentation at moderate density depends on the initial conditions for star formation more than on the metal abundances present. The actual initial conditions to be considered still need to be determined in detail by observation and modeling of galaxy formation. Metal abundance may still drive fragmentation at very high densities due to dust cooling, perhaps giving an alternative metallicity threshold.

THE SOCIO-ECONOMIC IMPORTANCE OF PROGRAMS FOR THE FINANCING OF CROSS-BORDER COOPERATION

Directory of Open Access Journals (Sweden)

Mioara BORZA

2015-12-01

Full Text Available The topic of European funding shows a great interest for present and, especially, for the future. The common problems of areas implied in the cross-border programs are correlated to socio-economic development of communities. By this paper we propose an analysis, by inventory type, descriptive and qualitative, of implemented projects and of the perspectives for projects in 2014-2020 period. The results of paper consist in identification of solid arguments about the importance and necessity of these programmes and projects.

Heavy metals in Australian grown and imported rice and vegetables on sale in Australia: health hazard.

Science.gov (United States)

Rahman, M Azizur; Rahman, Mohammad Mahmudur; Reichman, Suzie M; Lim, Richard P; Naidu, Ravi

2014-02-01

Dietary exposure to heavy metals is a matter of concern for human health risk through the consumption of rice, vegetables and other major foodstuffs. In the present study, we investigated concentrations of cadmium (Cd), cobalt (Co), chromium (Cr), copper (Cu), manganese (Mn), nickel (Ni), lead (Pb), and zinc (Zn) in Australian grown and imported rice and vegetables on sale in Australia. The mean concentrations of Cd, Co, Cr, Cu, Mn, Ni, Pb, and Zn in Australian grown rice were 7.5 µg kg(-1), 21 µg kg(-1), 144 µg kg(-1), 2.9 mg kg(-1), 24.4 mg kg(-1), 166 µg kg(-1), 375 µg kg(-1), and 17.1 mg kg(-1) dry weight (d. wt.), respectively. Except Cd, heavy metal concentrations in Australian grown rice were higher than Bangladeshi rice on sale in Australia. However, the concentrations of Cd, Cr, Cu, and Ni in Indian rice on sale in Australia were higher than Australian grown rice. The concentrations of Cu and Ni in Vietnamese rice, and that of Cd, Cr, Cu, Ni, and Pb in Thai rice on sale in Australia were also higher than Australian grown rice. Heavy metal concentrations in Pakistani rice on sale in Australia were substantially lower than that in Australian grown rice. In Australian grown rice varieties, the concentrations of heavy metals were considerably higher in brown rice varieties than white rice varieties, indicating Australian brown rice as a potential source of dietary heavy metals for Australian consumers. The mean concentrations of heavy metals in Australian grown and Bangladeshi vegetables on sale in Australia were also determined. Some of the Australian grown and Bangladeshi vegetables contained heavy metals higher than Australian standard maximum limits indicating them as potential sources of dietary heavy metals for Australian consumers. Further investigation is required to estimate health risks of heavy metals from rice and vegetables consumption for Australian consumers. © 2013 Published by Elsevier Inc.

Economics of Sustainable Development. Competitiveness and Economic Growth

Directory of Open Access Journals (Sweden)

Dorel AILENEI

2011-02-01

Full Text Available Economic growth is one of the most important issues of humanity. Both in national economies and world economy, recession and prosperity periods are regularly succeeding with different amplitudes. But beyond these fluctuations and their effects, the results are important: performance and economic growth. Because of the problematical issue of economic growth, the authors are trying to critically reflect on the economic growth concept and on its implications on the praxis area. Although there is a large literature about economic growth modeling, it is intriguing that there still are some serious obstacles for conceptualization and praxis. Only the simple fact that the economic growth process needs serious thinking on the time dimension is sufficient for understanding the real difficulties of this problematical issue. As for the economic growth praxis, a clear analysis of the interests system within an economy is needed. Without trying to find miraculous solutions for the economic growth issue, the authors suggest a clear and correct analysis of this important subject.

Personality Type and Student Performance in Upper-Level Economics Courses: The Importance of Race and Gender.

Science.gov (United States)

Borg, Mary O.; Stranahan, Harriet A.

2002-01-01

Demonstrates that personality type is an important explanatory variable in student performance in upper level economics courses. Finds that certain personality types, combined with race and gender effects, produce students who outperform other students. Introverts and those with the Keirsey-Bates temperament combination of sensing/judging…

Comparative assessment of metallurgical recovery of metals from electronic waste with special emphasis on bioleaching.

Science.gov (United States)

Priya, Anshu; Hait, Subrata

2017-03-01

Waste electrical and electronic equipment (WEEE) or electronic waste (e-waste) is one of the fastest growing waste streams in the urban environment worldwide. The core component of printed circuit board (PCB) in e-waste contains a complex array of metals in rich quantity, some of which are toxic to the environment and all of which are valuable resources. Therefore, the recycling of e-waste is an important aspect not only from the point of waste treatment but also from the recovery of metals for economic growth. Conventional approaches for recovery of metals from e-waste, viz. pyrometallurgical and hydrometallurgical techniques, are rapid and efficient, but cause secondary pollution and economically unviable. Limitations of the conventional techniques have led to a shift towards biometallurgical technique involving microbiological leaching of metals from e-waste in eco-friendly manner. However, optimization of certain biotic and abiotic factors such as microbial species, pH, temperature, nutrients, and aeration rate affect the bioleaching process and can lead to profitable recovery of metals from e-waste. The present review provides a comprehensive assessment on the metallurgical techniques for recovery of metals from e-waste with special emphasis on bioleaching process and the associated factors.

Liquid metal batteries - materials selection and fluid dynamics

Science.gov (United States)

Weier, T.; Bund, A.; El-Mofid, W.; Horstmann, G. M.; Lalau, C.-C.; Landgraf, S.; Nimtz, M.; Starace, M.; Stefani, F.; Weber, N.

2017-07-01

Liquid metal batteries are possible candidates for massive and economically feasible large-scale stationary storage and as such could be key components of future energy systems based mainly or exclusively on intermittent renewable electricity sources. The completely liquid interior of liquid metal batteries and the high current densities give rise to a multitude of fluid flow phenomena that will primarily influence the operation of future large cells, but might be important for today’s smaller cells as well. The paper at hand starts with a discussion of the relative merits of using molten salts or ionic liquids as electrolytes for liquid metal cells and touches the choice of electrode materials. This excursus into electrochemistry is followed by an overview of investigations on magnetohydrodynamic instabilities in liquid metal batteries, namely the Tayler instability and electromagnetically excited gravity waves. A section on electro-vortex flows complements the discussion of flow phenomena. Focus of the flow related investigations lies on the integrity of the electrolyte layer and related critical parameters.

Importance of dose metrics for lethal and sublethal sediment metal toxicity in the oligochaete worm Lumbriculus variegatus

Energy Technology Data Exchange (ETDEWEB)

Penttinen, O.P.; Kilpi-Koski, J.; Toivainen, K. [Helsinki Univ., Lahti (Finland). Dept. of Ecology end Environmental Sciences; Jokela, M. [Mikkeli Univ. of Applied Sciences, Mikkeli (Finland); Vaeisaenen, A. [Jyvaeskylae Univ. (Finland). Dept. of Chemistry

2008-02-15

Background, aims, and scope. There is an increasing demand for controlled toxicity tests to predict biological effects related to sediment metal contamination. In this context, questions of metal-specific factors, sensitivity of toxicity endpoints, and variability in exposure duration arise. In addition, the choice of the dose metrics for responses is equally important and is related to the applicability of the concept of critical body residue (CBR) in exposure assessments, as well as being the main focus of this study. Methods. Experiments were conducted to assess toxicity of Cd, Cr, Cu and Pb to the oligochaete worm Lumbriculus variegatus with the aim of determining CBRs for two response metrics. Mortality and feeding activity of worms exposed to sediment-spiked metals were used as end-points in connection with residue analyses from both the organisms and the surrounding media. Results. LC50 values were 0.3, 1.4, 5.2, and 6.7 mg/L (from 4.7 {mu}mol/L to 128.0 {mu}mol/L), and the order of toxicity, from most toxic to least toxic, was Cu > Cd > Pb>Cr. By relating toxicity to body residue, variability in toxicity among the metals decreased and the order of toxicity was altered. The highest lethal residue value was obtained for Cu (10.8 mmol/kg) and the lowest was obtained for Cd (2.3 mmol/kg). In the 10-d sublethal test, both time and metal exposure were an important source of variation in the feeding activity of worms. The significant treatment effects were observed from worms exposed to Cd or Pb, with the controls yielding the highest feeding rate. However, quantitative changes in the measured end-point did not correlate with the exposure concentrations or body residues, which remained an order of magnitude lower than in the acute exposures. (orig.)

The social, economic, and environmental importance of inland fish and fisheries

Science.gov (United States)

Lynch, Abigail J.; Cooke, Steven J.; Deines, Andrew M.; Bower, Shannon D.; Bunnell, David B.; Cowx, Ian G.; Nguyen, Vivian M.; Nohner, Joel K.; Phouthavong, Kaviphone; Riley, Betsy; Rogers, Mark W.; Taylor, William W.; Woelmer, Whitney; Youn, So-Jung; Beard, T. Douglas

2016-01-01

Though reported capture fisheries are dominated by marine production, inland fish and fisheries make substantial contributions to meeting the challenges faced by individuals, society, and the environment in a changing global landscape. Inland capture fisheries and aquaculture contribute over 40% to the world’s reported finfish production from less than 0.01% of the total volume of water on earth. These fisheries provide food for billions and livelihoods for millions of people worldwide. Herein, using supporting evidence from the literature, we review 10 reasons why inland fish and fisheries are important to the individual (food security, economic security, empowerment), to society (cultural services, recreational services, human health and well-being, knowledge transfer and capacity building), and to the environment (ecosystem function and biodiversity, as aquatic “canaries”, the “green food” movement). However, the current limitations to valuing the services provided by inland fish and fisheries make comparison with other water resource users extremely difficult. This list can serve to demonstrate the importance of inland fish and fisheries, a necessary first step to better incorporating them into agriculture, land-use, and water resource planning, where they are currently often underappreciated or ignored.

Radiometric monitoring of contaminated scrap metals imported in Italy. Technical and regulatory features

International Nuclear Information System (INIS)

Dobici, F.; Piermattei, S.; Susanna, A.

1996-01-01

During these last ten years there have been occasional reports of mishaps from trafficking of contaminated scraps or containing radioactive sources. Recently an increase of events indicated that the problem becomes more important as to generate possible consequences, from a radiation protection standpoint, for workers and general public. Following the detection of contaminated metal scraps in some recycling industries and in some consignments entering the Italian borders, the competent Authorities laid down rules to put the matter under control. In this paper technical and regulatory features are discussed. (author)

Toxicity of heavy metals to fish: an important consideration for sucessful aquaculture

OpenAIRE

Nnaji, J.C.; Okoye, F.C.

2007-01-01

Heavy metals are toxic to man, animals and plants once safe limits are exceeded. Then ability to bio accumulate in plant and animal tissues makes them particularly hazardous. Heavy metals are toxic to all aquatic biota and cause high mortality of fish larva, fry, fingerling and adult fish. They accumulate in the gills, heart, liver, kidneys, brain, bones and muscles of fish. The physico-chemical forms of heavy metals determine their mobility, availability and toxicity to fish. These metals en...

THE IMPORTANCE OF FOREIGN DIRECT INVESTMENTS ON ECONOMIC DEVELOPMENT OF KOSOVA

OpenAIRE

Myrvete Badivuku Pantina; Mihane Berisha Namani

2008-01-01

Kosova, in the period of nine years, has gone from a post-conflict environment into a state which is considered to be under transition. It has passed the reconstruction period by orienting itself toward the economic development and European Integrations. Yet, an economic development is not enough to be able to address the challenges Kosova is facing, such as high unemployment and high trade deficit rate. The unemployment rate in Kosova is one the highest economic concerns. The unemployment ra...

The importance of biomass net uptake for a trace metal budget in a forest stand in north-eastern France

International Nuclear Information System (INIS)

Gandois, L.; Nicolas, M.; VanderHeijden, G.; Probst, A.

2010-01-01

The trace metal (TM: Cd, Cu, Ni, Pb and Zn) budget (stocks and annual fluxes) was evaluated in a forest stand (silver fir, Abies alba Miller) in north-eastern France. Trace metal concentrations were measured in different tree compartments in order to assess TM partitioning and dynamics in the trees. Inputs included bulk deposition, estimated dry deposition and weathering. Outputs were leaching and biomass exportation. Atmospheric deposition was the main input flux. The estimated dry deposition accounted for about 40% of the total trace metal deposition. The relative importance of leaching (estimated by a lumped parameter water balance model, BILJOU) and net biomass uptake (harvesting) for ecosystem exportation depended on the element. Trace metal distribution between tree compartments (stem wood and bark, branches and needles) indicated that Pb was mainly stored in the stem, whereas Zn and Ni, and to a lesser extent Cd and Cu, were translocated to aerial parts of the trees and cycled in the ecosystem. For Zn and Ni, leaching was the main output flux (> 95% of the total output) and the plot budget (input-output) was negative, whereas for Pb the biomass net exportation represented 60% of the outputs and the budget was balanced. Cadmium and Cu had intermediate behaviours, with 18% and 30% of the total output relative to biomass exportation, respectively, and the budgets were negative. The net uptake by biomass was particularly important for Pb budgets, less so for Cd and Cu and not very important for Zn and Ni in such forest stands.

The importance of biomass net uptake for a trace metal budget in a forest stand in north-eastern France.

Science.gov (United States)

Gandois, L; Nicolas, M; VanderHeijden, G; Probst, A

2010-11-01

The trace metal (TM: Cd, Cu, Ni, Pb and Zn) budget (stocks and annual fluxes) was evaluated in a forest stand (silver fir, Abies alba Miller) in north-eastern France. Trace metal concentrations were measured in different tree compartments in order to assess TM partitioning and dynamics in the trees. Inputs included bulk deposition, estimated dry deposition and weathering. Outputs were leaching and biomass exportation. Atmospheric deposition was the main input flux. The estimated dry deposition accounted for about 40% of the total trace metal deposition. The relative importance of leaching (estimated by a lumped parameter water balance model, BILJOU) and net biomass uptake (harvesting) for ecosystem exportation depended on the element. Trace metal distribution between tree compartments (stem wood and bark, branches and needles) indicated that Pb was mainly stored in the stem, whereas Zn and Ni, and to a lesser extent Cd and Cu, were translocated to aerial parts of the trees and cycled in the ecosystem. For Zn and Ni, leaching was the main output flux (>95% of the total output) and the plot budget (input-output) was negative, whereas for Pb the biomass net exportation represented 60% of the outputs and the budget was balanced. Cadmium and Cu had intermediate behaviours, with 18% and 30% of the total output relative to biomass exportation, respectively, and the budgets were negative. The net uptake by biomass was particularly important for Pb budgets, less so for Cd and Cu and not very important for Zn and Ni in such forest stands. Copyright © 2010 Elsevier B.V. All rights reserved.

Critical metals in the great transformation

International Nuclear Information System (INIS)

Exner, Andreas; Held, Martin; Kuemmerer, Klaus

2016-01-01

The book broadens the view on the short-term availability of critical metals to the fundamental question: critical for whom? The authors take all stakeholders into consideration and deal with geological, chemical, technical, economic and social aspects as well as questions of recycling. They also address questions of good life and mining from the perspective of countries of the South, questions of resource policy and justice. A further topic is the UN deep-sea mining regime and its perspectives on how unconventional ore from the deep-sea can be won in the future. Critical metals are classified into the overlapping context of the upcoming Great Transformation. The book examines in particular the fundamental importance of the material prerequisites of the energy transition and the energetic prerequisites of the material turnaround as well as the digitization. This shows that not only rare earths are critical, but also industrial metals such as copper. Resource policy aims, among other things, to secure primary supplies of technology metals, resource efficiency, recycling and substitution of critical substances. Despite the first successes, the dynamics are still unbroken in the direction of an increasing dissipation of valuable critical metals. What is needed is a rapid reversal with the aim of no longer consuming critical metals on a grand scale, but of using them wisely. [de

Metal cluster compounds - chemistry and importance; clusters containing isolated main group element atoms, large metal cluster compounds, cluster fluxionality

International Nuclear Information System (INIS)

Walther, B.

1988-01-01

This part of the review on metal cluster compounds deals with clusters containing isolated main group element atoms, with high nuclearity clusters and metal cluster fluxionality. It will be obvious that main group element atoms strongly influence the geometry, stability and reactivity of the clusters. High nuclearity clusters are of interest in there own due to the diversity of the structures adopted, but their intermediate position between molecules and the metallic state makes them a fascinating research object too. These both sites of the metal cluster chemistry as well as the frequently observed ligand and core fluxionality are related to the cluster metal and surface analogy. (author)

The Priority Importance of Economic Motivation Factors Against Risks for Green Building Development in Malaysia

Directory of Open Access Journals (Sweden)

Mohamed Ghazali Farid Ezanee

2017-01-01

Full Text Available Green building development is an emerging paradigm for the construction industry practice all around the world. The establishement of Green Building rating tool helps to assess the whole life cycle process in planning to operation in a building. The Malaysian construction industry recognizes buildings that have been assessed using established green building tool such Green Building Index, Green RE or My CREST. Eventhough these rating tools provide motivation factors in its criteria and sub-criteria to promote sustainability in Malaysia buildings, there is still a major doubt to developers in terms of risks that may hinder their investments in green buildings. This paper highlights the priority importance of economic motivation factors against risks in the green building development in Malaysia. The data presented in this paper have been mainly derived from responses received through questionnaires completed by building stakeholders involved in green building developments. In order to determine the priority importance of economic motivation factors and risks identified for green building development, the questionnaire outcomes have been thoroughly assessed using the Analytical Hierarchy Process (AHP method. As a result, lack of government incentive and high capital cost, which classified under green building risks, are the two key factors with highest priority importance that influenced most of the decision making for green building development in Malaysia. The results show green buildings have proliferated as governmental support and incentives with more exampler of higher profit return of investment in enhancing developers preference for green building development.

Metal Sulfide Cluster Complexes and their Biogeochemical Importance in the Environment

International Nuclear Information System (INIS)

Luther, George W.; Rickard, David T.

2005-01-01

Aqueous clusters of FeS, ZnS and CuS constitute a major fraction of the dissolved metal load in anoxic oceanic, sedimentary, freshwater and deep ocean vent environments. Their ubiquity explains how metals are transported in anoxic environmental systems. Thermodynamic and kinetic considerations show that they have high stability in oxic aqueous environments, and are also a significant fraction of the total metal load in oxic river waters. Molecular modeling indicates that the clusters are very similar to the basic structural elements of the first condensed phase forming from aqueous solutions in the Fe-S, Zn-S and Cu-S systems. The structure of the first condensed phase is determined by the structure of the cluster in solution. This provides an alternative explanation of Ostwald's Rule, where the most soluble, metastable phases form before the stable phases. For example, in the case of FeS, we showed that the first condensed phase is nanoparticulate, metastable mackinawite with a particle size of 2 nm consisting of about 150 FeS subunits, representing the end of a continuum between aqueous FeS clusters and condensed material. These metal sulfide clusters and nanoparticles are significant in biogeochemistry. Metal sulfide clusters reduce sulfide and metal toxicity and help drive ecology. FeS cluster formation drives vent ecology and AgS cluster formation detoxifies Ag in Daphnia magna neonates. We also note a new reaction between FeS and DNA and discuss the potential role of FeS clusters in denaturing DNA

Assessment of alkali metal coolants for the ITER blanket

International Nuclear Information System (INIS)

Natesan, K.; Reed, C.B.; Mattas, R.F.

1994-01-01

The blanket system is one of the most important components of a fusion reactor because it has a major impact on both the economics and safety of fusion energy. The primary functions of the blanket in a deuterium/tritium-fueled fusion reactor are to convert the fusion energy into sensible heat and to breed tritium for the fuel cycle. The Blanket Comparison and Selection Study, conducted earlier, described the overall comparative performance of different blanket concepts, including liquid metal, molten salt, water, and helium. This paper will discuss the ITER requirements for a self-cooled blanket concept with liquid lithium and for indirectly cooled concepts that use other alkali metals such as NaK. The paper will address the thermodynamics of interactions between the liquid metals (i.e., lithium and NaK) and structural materials (e.g., V-base alloys), together with associated corrosion/compatibility issues. Available experimental data will be used to assess the long-term performance of the first wall in a liquid metal environment

Impact of hydrogen onboard storage technologies on the performance of hydrogen fuelled vehicles: A techno-economic well-to-wheel assessment

NARCIS (Netherlands)

de Wit, M.P.; Faaij, A.P.C.

2007-01-01

Hydrogen onboard storage technologies form an important factor in the overall performance of hydrogen fuelled transportation, both energetically and economically. Particularly, advanced storage options such as metal hydrides and carbon nanotubes are often hinted favourable to conventional, liquid

Method and apparatus for dissociating metals from metal compounds extracted into supercritical fluids

Science.gov (United States)

Wai, Chien M.; Hunt, Fred H.; Smart, Neil G.; Lin, Yuehe

2000-01-01

A method for dissociating metal-ligand complexes in a supercritical fluid by treating the metal-ligand complex with heat and/or reducing or oxidizing agents is described. Once the metal-ligand complex is dissociated, the resulting metal and/or metal oxide form fine particles of substantially uniform size. In preferred embodiments, the solvent is supercritical carbon dioxide and the ligand is a .beta.-diketone such as hexafluoroacetylacetone or dibutyldiacetate. In other preferred embodiments, the metals in the metal-ligand complex are copper, silver, gold, tungsten, titanium, tantalum, tin, or mixtures thereof. In preferred embodiments, the reducing agent is hydrogen. The method provides an efficient process for dissociating metal-ligand complexes and produces easily-collected metal particles free from hydrocarbon solvent impurities. The ligand and the supercritical fluid can be regenerated to provide an economic, efficient process.

Metal footprint linked to economy

Science.gov (United States)

Burke, Paul J.

2018-04-01

The annual quantity of metal being used by humans has been on the rise. A new analysis of 43 major economies reveals the extent to which year-to-year fluctuations in metal footprints have been in lockstep with countries' economic growth and changes in investment spending.

Insights into the Importance of Economic Concepts to Other Introductory Business Courses

Science.gov (United States)

Prenshaw, Penelope J.; Taylor, Susan Washburn

2007-01-01

Economics is a building block for additional business knowledge. In most business curricula, the principles of economics sequence is a prerequisite for further business study. Economists have their own ideas of which economic concepts are most valued by business peers, but the authors are unaware of any published study which specifically asks…

Economic benefits of subsea flexible flowlines

International Nuclear Information System (INIS)

Hill, R.T.; Measamer, J.C.

1993-01-01

The development of marginal off-shore hydrocarbon deposits has resulted in production of increasingly corrosive fluids, thus furthering the need for pipelines capable of operating at elevated temperatures in the presence of high concentrations of H 2 S and CO 2 gases. Conventional pipelines require the use of stainless steels or other corrosion resistant alloys which drives up the cost of materials and fabrication/installation of the system. The use of flexible pipe is assuming an important role in these applications where the selection of compatible metallic and non-metallic components have resulted in cost effective alternatives. As development of marginal and aggressive hydrocarbon reservoirs increases operators are faced with providing systems which minimize the cost of field production. This paper describes the results of economic analyses of actual field developments in order to provide a methodology for selection of an appropriate pipeline technology to minimize life cycle costs of the flowline system

Study of radiation portal monitor and its application to metal recycling industry

International Nuclear Information System (INIS)

Pujol, L.; Lara-Calleja, S.; Suarez-Navarro, M. J.; Gonzalez-Gonzalez, J. A.

2009-01-01

The industry of the iron and the steel in one of the most important sectors in Spain for its economic development. the recycling of metallic materials as well as the import of metallic scrap is very significant. Several reports on accidental dispersion or smelting of radioactive sources in metal recycling industries confirm the possibility that radioactive material might be mixed with scrap. In consequence, this type of accident shows the necessity of a rigorous and specific radiation control of the sector. The control of these materials with radioactive content can be carried out with radiation portal monitors installed at the entrance of these industries. The detection of radioactive materials presents special features as the continuous background acquisition or the minimisation of the relatively large number of innocent/nuisance detections. In the present work, we study a radiation portal monitor, the FHT-1388-T Thermo-Eberline. This is one of the usual radiation portal systems installed at the entrance of the metal recycling industry. Se study the characteristics and parameters of this portal monitor to optimise its use. furthermore, we propose some rapid tests for radiation portal systems in metal recycling industry. (Author) 16 refs

Homegrown or imported? Frugal innovation and local economic development in Zambia

NARCIS (Netherlands)

Pesa, I.

2015-01-01

Innovation and entrepreneurship have the potential to stimulate economic growth. Yet it remains unclear whether top-down or bottom-up innovations are more likely to lead to local economic development. By looking at three cases of frugal innovation on the Zambian Copperbelt, in the spheres of

Method of dissolving metal ruthenium

International Nuclear Information System (INIS)

Tsuno, Masao; Soda, Yasuhiko; Kuroda, Sadaomi; Koga, Tadaaki.

1988-01-01

Purpose: To dissolve and clean metal ruthenium deposited to the inner surface of a dissolving vessel for spent fuel rods. Method: Metal ruthenium is dissolved in a solution of an alkali metal hydroxide to which potassium permanganate is added. As the alkali metal hydroxide used herein there can be mentioned potassium hydroxide, sodium hydroxide and lithium hydroxide can be mentioned, which is used as an aqueous solution from 5 to 20 % concentration in view of the solubility of metal ruthenium and economical merit. Further, potassium permanganate is used by adding to the solution of alkali metal hydroxide at a concentration of 1 to 5 %. (Yoshihara, H.)

Metals in geopropolis from beehive of Melipona scutellaris in urban environments.

Science.gov (United States)

Bonsucesso, Josemário S; Gloaguen, Thomas V; do Nascimento, Andreia S; de Carvalho, Carlos Alfredo L; de S Dias, Fabio

2018-09-01

Geopropolis, a different type of propolis, presents a mixture of resin and exudates, containing wax, silt, and sand particles. This product has been the subject of research interest for its physicochemical properties, economic importance, and likely for environmental monitoring. The determination of toxic metals in hive products has been reported as an efficient tool for environmental monitoring. As the honey production is now common in urban environments, this study aimed to determine the concentration of toxic metals in the Melipona scutellaris geopropolis of the Metropolitan Region of Salvador, Bahia. Geopropolis and soil samples were collected from seven important beehives between June 2015 and July 2016. After EPA 3050B acid digestion procedure, metals were determined by ICP OES. As the geopropolis is partially made from soil, the values of Cr and Fe were extremely more important than the values reported in propolis, wax, and honey found in other worldwide studies. It gives different characteristics to this product depending on the location of the hive and characterizes it as an efficient integrating indicator of soil pollution. Using the enrichment factor, we determined that the soils around the meliponary are not or only slightly polluted by Cu, Cr, Ni, Pb and Zn. However, there was a shift in the particle size of geopropolis, being loamier and less sandy than the surrounding soil. In such case, a higher metal content could be expected, though no metal enrichment in the geopropolis was found, even a decrease in zinc, possibly due to the exclusion of metals by bees, was noted. Nevertheless, the results on the proportions of lithogenic metal and anthropogenic metal indicate that some metals have an external origin (about 20% for Ni and Cu). Geopropolis can be considered as a good environmental indicator even in low contaminated areas. Copyright © 2018 Elsevier B.V. All rights reserved.

Network versus Economic Incentives

DEFF Research Database (Denmark)

Larsen, Christian Albrekt

The article supplements the traditional economic line of reasoning with an economic sociological account of the transition from unemployment to employment. The lack of full information is recognised by economic theory while the focus on network within the tradition of economic sociology has...... not been adopted. The article argues that the importance of network actually might be very well understood within recent economic theories that emphasise the lack of full information. The empirical evidence for the importance of network both for employed and unemployed is provided by analysing a best case...... might be an important part of the vicious circles of unemployment. Finally, the article analyse the importance of network versus the importance of economic incentives. The result supports the thesis that economic sociology provides a better account of the transition from unemployment to employment than...

THE SUSTAINABLE IMPORTANCE OF REMITTANCES AND THEIR ROLE IN ECONOMIC DEVELOPMENT. THE CASE OF ROMANIA

Directory of Open Access Journals (Sweden)

Liana SON

2009-06-01

Full Text Available The increasing amplitude of migrants and remittences in the last years, especially toward the developing countries has positive effects on development in the countries of origin. Empiric research outline the potentially significant effect of remittances on the economy of a country in various ways, as a source of external financing, contributing to the growth and economic development, to the increase of the national income and stimulation of consumption, and at the same time, important in financing households, contributing to poverty decrease. These challenges are a priority for Romania, an emigration country that receives every year un important volume of remittances, but, at present with a preponderant role in the consumption.

Direct Metal Laser Sintering: A Digitised Metal Casting Technology

OpenAIRE

Venkatesh, K. Vijay; Nandini, V. Vidyashree

2013-01-01

Dental technology is undergoing advancements at a fast pace and technology is being imported from various other fields. One such imported technology is direct metal laser sintering technology for casting metal crowns. This article will discuss the process of laser sintering for making metal crowns and fixed partial dentures with a understanding of their pros and cons.

Direct metal laser sintering: a digitised metal casting technology.

Science.gov (United States)

Venkatesh, K Vijay; Nandini, V Vidyashree

2013-12-01

Dental technology is undergoing advancements at a fast pace and technology is being imported from various other fields. One such imported technology is direct metal laser sintering technology for casting metal crowns. This article will discuss the process of laser sintering for making metal crowns and fixed partial dentures with a understanding of their pros and cons.

Metals Are Important Contact Sensitizers: An Experience from Lithuania

Directory of Open Access Journals (Sweden)

Kotryna Linauskienė

2017-01-01

Full Text Available Background. Metals are very frequent sensitizers causing contact allergy and allergic contact dermatitis worldwide; up-to-date data based on patch test results has proved useful for the identification of a problem. Objectives. In this retrospective study prevalence of contact allergy to metals (nickel, chromium, palladium, gold, cobalt, and titanium in Lithuania is analysed. Patients/Methods. Clinical and patch test data of 546 patients patch tested in 2014–2016, in Vilnius University Hospital Santariskiu Klinikos, was analysed and compared with previously published data. Results. Almost third of tested patients (29.56% were sensitized to nickel. Younger women were more often sensitized to nickel than older ones (36% versus 22.8%, p=0.0011. Women were significantly more often sensitized to nickel than men (33% versus 6.1%, p<0.0001. Younger patients were more often sensitized to cobalt (11.6% versus 5.7%, p=0.0183. Sensitization to cobalt was related to sensitization to nickel (p<0.0001. Face dermatitis and oral discomfort were related to gold allergy (28% versus 6.9% dermatitis of other parts, p<0.0001. Older patients were patch test positive to gold(I sodium thiosulfate statistically significantly more often than younger ones (44.44% versus 21.21%, p=0.0281. Conclusions. Nickel, gold, cobalt, and chromium are leading metal sensitizers in Lithuania. Cobalt sensitization is often accompanied by sensitization to nickel. Sensitivity rate to palladium and nickel indicates possible cross-reactivity. No sensitization to titanium was found.

Metal recovery by bioleaching of sulfidic mining wastes — Application to a European case study

Science.gov (United States)

Guézennec, A. G.; Jacob, J.; Joulian, C.; Dupraz, S.; Menard, Y.; d'Hugues, P.

The non-energy extractive industry (NEEI) of the EU-25 generated a direct turnover of about €40 billion, and provided employment to about 250000 people in 16629 companies in 2004. The use of primary raw materials in the production of other branches of EU industry means they have a central role in guaranteeing industrial and economic sustainability. Nevertheless current demand exceeds production, and so the EU is heavily dependent on minerals and metals imports. In this context of securing access to metals, turning mining wastes into new resources of currently unexploited valuable metals is an important challenge. The mining wastes can contain base and precious metals, but also metalloids and rare earth elements that are nowadays considered as highly critical for the industrial development of the European Union. Nevertheless, the development of alternative routes to conventional processing is still required in order to decrease the cost associated to the treatment of these unconventional resources which are more complex in composition and with lower grades.

Economic and Social Models in Europe and the Importance of Reform

Directory of Open Access Journals (Sweden)

Martin Heipertz

2008-09-01

Full Text Available This paper contributes to the ongoing debate on European economic and social models. It provides a comparative assessment of fiscal and regulatory policies in 17 industrialised countries (the EU15, US and Japan and presents the records of these countries in attaining key economic and social objectives. Social and economic systems that feature efficient public sectors and flexible market structures tend to experience reasonably sustainable public finances, high economic growth, education standards and employment, and well-functioning markets. Anglo-Saxon countries broadly fit this mould, albeit, seemingly, at some cost of income equality. A more pronounced emphasis on welfare state policies and the corresponding relatively high levels of public spending bring benefit to income distribution in the Nordic countries while the resulting inefficiencies in their economies are counterbalanced by flexibility in labour and particularly product markets. Also, a number of reform-minded European countries have improved their fiscal and regulatory policies while significantly enhancing the functioning of markets, fiscal sustainability and economic performance. This was generally attained without jeopardising social objectives. On the other hand, those continental and Mediterranean countries that maintain market inefficiencies and at the same time sustain expensive and inefficient welfare states generally suffer from low growth and employment and less well-functioning markets and face serious risks to their economies’ fiscal sustainability. The findings of this note support calls for the comprehensive reform of fiscal policies, as well as of product and labour markets.

Relation between heavy metals level in soil and some economic ...

African Journals Online (AJOL)

Ekpo

Soil sample with the depth of (0-15cm), cassava leaves and, ... and P111. The high concentrations of trace metals recorded in the leaves of the plant species may be due to ... average temperature is between 250C and 360C ... the traditional land tenure system and the major crops ..... Historical records of metals pollution.

Relative importance of different exposure routes of heavy metals for humans living near a municipal solid waste incinerator

International Nuclear Information System (INIS)

Li, Tong; Wan, Yi; Ben, Yujie; Fan, Senrong; Hu, Jianying

2017-01-01

The potential health effects of toxic chemicals (e.g. heavy metals) emitted by municipal solid waste incinerators (MSWIs) are of great concern to local residents, however there have been few studies on the contributions of different exposure pathways and their subsequent effects on the body burden of residents living near MSWIs. In this study, multiple exposure routes of heavy metals including Pb, Cr, Cd and Mn were assessed by investigating the metals in foods (such as vegetables, crops, meats and fruits etc.), drinking water, ambient air and soil collected surrounding an MSWI in Shenzhen, south China. Vegetable ingestion played the most important role in the total average daily dose of Pb and Cr, and cereals were the key exposure routes for Mn and Cd. Compound-specific contaminations were observed in the investigated areas, with Pb and Cr present in the surrounding environment, having accumulated to relatively high levels in the local vegetables, and the intake of contaminated vegetable foods greatly influencing the body burden of Pb and Cr. Consistently, significantly high blood concentrations of Pb and Cr were detected in the local residents compared to a referenced population, and a lack of significant differences was found for Cd and Mn. The results possibly suggested that emission of MSWI influenced the external exposure doses of the major pathways of Pb and Cr in this study, and resulted in the different body burden of metals in humans living near a MSWI. MSWI-local food-humans is an important exposure pathway for residents living near MSWI, and thus should not be neglected in developing future strategies and policies to prevent the high risks suffered by residents living near MSWIs. - Highlights: • Vegetable and cereal ingestion were the main contributors to exposure of Pb/Cr and Mn/Cd, respectively. • Concentrations of Pb/Cr in vegetables grown near MSWI were significantly higher. • Blood concentrations of Pb/Cr in populations near MSWI were

Economic importance of the small miner and small mining businesses in Alaska

Energy Technology Data Exchange (ETDEWEB)

Hawley, C.C.; Whitney, J.W.; Wobber, F.J.

1977-11-01

This study documents the economic characteristics of the small mining industry in Alaska, including both mine production and mineral deposit discovery. Economic effects on business activities in Alaska are considered. The study is largely qualitative in nature. It is based on state economic statistics, data obtained from state and federal government agencies, interviews, and indirect evaluation. Direct and indirect effects on employment, purchase and maintenance of heavy equipment, fuels, other consumables, and transportation are identified.

INEL metal recycle radioactive scrap metal survey report

International Nuclear Information System (INIS)

Funk, D.M.

1994-09-01

DOE requested that inventory and characterization of radioactive scrap metal (RSM) be conducted across the DOE complex. Past studies have estimated the metal available from unsubstantiated sources. In meetings held in FY-1993, with seven DOE sites represented and several DOE-HQ personnel present, INEL personnel discovered that these numbers were not reliable and that large stockpiles did not exist. INEL proposed doing in-field measurements to ascertain the amount of RSM actually available. This information was necessary to determine the economic viability of recycling and to identify feed stock that could be used to produce containers for radioactive waste. This inventory measured the amount of RSM available at the selected DOE sites. Information gathered included radionuclide content and chemical form, general radiation field, alloy type, and mass of metal

Metal toxicity characterization factors for marine ecosystems: considering the importance of the estuary for freshwater emissions

DEFF Research Database (Denmark)

Dong, Yan; Rosenbaum, Ralph K.; Hauschild, Michael Zwicky

2017-01-01

The study develops site-dependent characterization factors (CFs) for marine ecotoxicity of metals emitted to freshwater, taking their passage of the estuary into account. To serve life cycle assessment (LCA) studies where emission location is often unknown, site-generic marine CFs were developed...... with an estuary removal process to calculate FF. BF and EF were taken from Dong et al. Environ Sci Technol 50:269–278 (2016). Site-generic marine CFs were derived from site-dependent marine CFs. Different averaging principles were tested, and the approach representing estuary discharge rate was identified...... between both methods. Accounting for estuary removal particularly influences marine ecotoxicity CFs for emission to freshwater of metals that have a strong tendency to complex-bind to particles. It indicates the importance of including estuary in the characterization modelling when dealing with those...

Book review: Economic geology: Principles and practice: Metals, minerals, coal and hydrocarbons—Introduction to formation and sustainable exploitation of mineral deposits

Science.gov (United States)

Anderson, Eric

2013-01-01

This volume, available in both hardcover and paperback, is an English translation of the fifth edition of the German language text Mineralische und Energie-Rohstoffe. The book provides an extensive overview of natural resources and societal issues associated with extracting raw materials. The comprehensive list of raw materials discussed includes metals, industrial minerals, coal, and hydrocarbons. The book is divided into four parts: (1) “Metalliferous ore deposits,” (2) “Nonmetallic minerals and rocks,” (3) “Practice of economic geology,” and (4) “Fossil energy raw materials—coal, oil, and gas.” These sections are bound by a brief introduction and an extensive list of up-to-date references as well as an index. Each chapter begins with a concise synopsis and concludes with a summary that contains useful suggestions for additional reading. All figures are grayscale images and line drawings; however, several have been grouped together and reproduced as color plates. Also included is a companion website (www.wiley.com/go/pohl/geology) that contains additional resources, such as digital copies of figures, tables, and an expanded index, all available for download in easy-to-use formats.Economic Geology: Principles and Practice: Metals, Minerals, Coal and Hydrocarbons—Introduction to Formation and Sustainable Exploitation of Mineral Deposits. Walter l. Pohl. 2011. Wiley-Blackwell. Pp. 663. ISBN 978-1-4443-3663-4 (paperback).

Economic foundation and importance of non-state security sector within the national security system

Directory of Open Access Journals (Sweden)

Anđelković Slobodan

2016-01-01

Full Text Available The main purpose of this paper was to present the causes (for, role (played by and the growing importance of the non-state actors within the national security sector, while analyzing the economic interest of individuals, organizations and the state itself that were favoring such a development. In the course of our research we established how, as the state narrowed its activities down to more vital and more dangerous fields of work, this opened up space for independent contractors to enter those fields which carried less systemic risk. Such change was made possible in the post-Cold War context, when many of the former service members were hired by private companies. The economic motive had a role to play as well, given the need for additional security going beyond what state offered to its citizens, as many doubted the ability (efficiency of state to provide it in the first place; and private sector's willingness to provide it for a price. In Serbia, position of non-state security sector is still very much limited by the traditional notion of security as well as the division of competences, both left-overs from socialist times. This goes against positive tendencies within the sector itself (improvement of types and specialization of the security as service; strengthening of legal regulation; flexibility of services being offered. By conducting its basic service and improving the security of its clients, representatives of non-state security sector are - indirectly - improving the security of society as a whole, ensuring economic stability, which presents one of key national interests.

Metal mobility during metamorphism and formation of orogenic gold deposits: Insights from the Dalradian of Scotland

OpenAIRE

Engström, Adam

2013-01-01

Orogenic gold deposits occur within metamorphic belts throughout the world and have through time represented the source for over 25% of the world’s gold production. Although orogenic gold deposits are of great economic importance, controversies exist on the subject of fluid and metal sources and there have been few studies of gold´s distribution and mobility outside of large economic deposits. Research made by Pitcairn et al. (2006), on the Mesozoic Otago and Alpine schists of New Zealand, ob...

METALert - an emergency response system for China for heavy metals in the environment

Science.gov (United States)

Joris, Ingeborg; Seuntjens, Piet; Dams, Jef; Desmet, Nele; Van Looy, Stijn; Raymaekers, Jens; Decorte, Lieve; Raben, Ingrid; Thijssen, Chris; Zhang, Hongzhen; Dong, Jingqi; Zhang, Qianwen

2016-04-01

The rapid industrialisation and economic growth of China has resulted in a mirrored increase of environmental issues and threats, which make the updating of the current environmental emergency response protocols very important. Heavy metal pollution accidents with high environmental risks are happening more frequently than ever in recent years. Despite efforts made by the authorites in respect to the formulation of sound policy, efficient technical methods and regulations for dealing with appropriate responses to emergency environmental incidents related to heavy metal pollution are still lacking. METALert is a generic Emergency Response System (ERS) for accidental pollution incidents caused by key heavy metal related industries in China and developed to support China in achieving its environmental targets. The METALert tool is based on environmental models for forecasting, simulation and visualisation of dispersion of heavy metal pollution in water, air and soil. The tool contains a generic database with scenarios for accidental release of metals in typical accidents related to the five key heavy metal industries in China. The tool can calculate the impact of an accident in water, air and soil and is evaluated and demonstrated for a river basin in the Chenzhou area, an important heavy metal mining area in China. The setup of the tool, the background models and the application in Chenzhou will be presented.

Process development study on production of uranium metal from monazite sourced crude uranium tetra-fluoride

International Nuclear Information System (INIS)

Chowdhury, S; Satpati, S.K.; Hareendran, K.N.; Roy, S.B.

2014-01-01

Development of an economic process for recovery, process flow sheet development, purification and further conversion to nuclear grade uranium metal from the crude UF 4 has been a technological challenge and the present paper, discusses the same.The developed flow-sheet is a combination of hydrometallurgical and pyrometallurgical processes. Crude UF 4 is converted to uranium di-oxide (UO 2 ) by chemical conversion route and UO 2 produced is made fluoride-free by repeated repulping, followed by solid liquid separation. Uranium di-oxide is then purified by two stages of dissolution and suitable solvent extraction methods to get uranium nitrate pure solution (UNPS). UNPS is then precipitated with air diluted ammonia in a leak tight stirred vessel under controlled operational conditions to obtain ammonium di-uranate (ADU). The ADU is then calcined and reduced to produce metal grade UO 2 followed by hydro-fluorination using anhydrous hydrofluoric acid to obtain metal grade UF 4 with ammonium oxalate insoluble (AOI) content of 4 is essential for critical upstream conversion process. Nuclear grade uranium metal ingot is finally produced by metallothermic reduction process at 650℃ in a closed vessel, called bomb reactor. In the process, metal-slag separation plays an important role for attaining metal purity as well as process yield. Technological as well economic feasibility of indigenously developed process for large scale production of uranium metal from the crude UF 4 has been established in Bhabha Atomic Research Centre (BARC), India

Economic Importance of Camel: A Unique Alternative under Crisis

Directory of Open Access Journals (Sweden)

S. Ahmad*, M. Yaqoob, N. Hashmi1, S. Ahmad2, M. A. Zaman3 and M. Tariq

2010-10-01

Full Text Available Increasing human population in the world has arisen the issue of food security. In order to combat with this issue, there is need to explore a new world of resources. Camel can serve the best useful addition to the food supply chain in terms of milk, meat and other products. Dromedary camel is found in Pakistan and its population is highest in Baluchistan (41%. In Pakistan, there are 21 breeds of camel. The main two types are riverine and mountainous. Camels are of vital socio-economic importance in the country as people use it for drawing water from wells, ploughing and leveling land, working mini-mills for oil extraction, grinding wheat, corn and other grains and for crushing sugarcane, and pulling carts for the transportation of goods as well as people. Well-fed camel can yield 10-15L milk per day. Camel milk can also be used for making yogurt, kurth, butter, ghee, rabbri and khoa. Meat, hides and hair are useful by-products of camel. Camel farming will be beneficial for farmers when proper marketing infrastructure is established. Also, standard procedures for the classification and identification of camel breeds for different purposes need more attention. Camel ranching schemes and collaborative research approach are need of the hour. These measures can lead us to utilize this novel animal as a natural resource for coping food demand of ever increasing population.

Economics of population versus economic demography

Directory of Open Access Journals (Sweden)

A. A. Tkachenko

2017-01-01

Full Text Available The article specifies the correlation between economic demography and the economy of population as the most important scientific areas of modern research. It is concluded that the Russian scientific community lags in the development of these sciences from the world scientific thought. Special attention is paid to the works and ideas of S. Kuznets and Amartya Sen as outstanding researchers of the interrelationships between the population and the economy. It is emphasized that their contribution was not only theoretical but also of practical importance. The importance of G. Myrdal’s works for modern studies of the consequences of population aging is considered. The article examines foreign training courses on “Population Economics”, presented at the Universities of Wisconsin and McMaster, their analysis led to the conclusion that the preparation of textbooks on courses is less productive than the use of scientific articles in journals, containing more recent ideas and achievements of science. The author considers the system, proposed in the course Michel Grignon and Byron G. Spencer «The Economics of Population» more preferable. The article substantiates the opinion that the economic theory of well-being should be the core of the population economy. It is concluded that the differences between economic demography and the economy of population are not just differences between the micro- and macro levels, as some authors write, but the transition to large scales and entropy.The author identifies three most important areas of demo-economic research, which include research in the field of human capital, international economic migration, especially remittance, analysis of the stratification of the population and society by the income in the global and national economies. One can single out the general area of interests of the population economy and economic demography in which these sciences are almost impossible to divide and in which only

Economics of Convention and New Economic Sociology

DEFF Research Database (Denmark)

Jagd, Søren

2007-01-01

The aim of the article is to explore potential common themes in economic sociology and economics of conventions. The article explores two issues raised by economics of conventions that may be of particular importance to economic sociology. First, the explicit exploration of the consequences...... of a plurality of forms of justification, as elaborated in économie de la grandeur. This perspective was recently taken up in economic sociology by David Stark's introduction of the notion ‘sociology of worth'. The second issue, recently suggested by André Orléan, is the need to denaturalize economic theory...... and economic action to demonstrate the social constructed nature of economic action. It is argued that these two issues demonstrate that a fruitful dialogue is indeed possible between economic sociology and economics of convention and should be encouraged....

Metallic elements occurrences within metallic fragments in the municipal waste incineration bottom ash

Science.gov (United States)

Kowalski, Piotr; Kasina, Monika; Michalik, Marek

2017-04-01

70%, 15% and 5% of the total amount of fragments. Fe occurred mainly as component of metallic inclusions and separate grains. Al was mostly present in metallic fragments on grains boundaries and also and as separate grains (often oxidised), moreover Al was important component of aluminosilicates and amorphous phase. Zn-rich metallic fragments were mostly in the form of separate grains. In complex composition of metallic fragments some regularities in elements co-occurrences were observed: Fe often co-existed with Si, Ca, P, Al and Ti; Al co-occurred with Fe, Si and Ca; Zn co-existed with Ca, Al and Si. Forms and composition of metallic fragments allows to evaluate them as potential polymetallic resource, however an economically reasonable extraction techniques must be applied. Acknowledgment Research was funded by Polish National Science Centre (NCN). Scientific grant No. UMO-2014/15/B/ST10/04171. Reference Kowalski, P.R., Kasina, M. and Michalik M.: Metallic elements fractionation in municipal solid waste incineration residues, Energy Procedia, 97, 31-36, doi: 10.1016/j.egypro.2016.10.013, 2016.

Socio-economic status plays important roles in childhood cancer treatment outcome in Indonesia.

Science.gov (United States)

Mostert, Saskia; Gunawan, Stefanus; Wolters, Emma; van de Ven, Peter; Sitaresmi, Mei; Dongen, Josephine van; Veerman, Anjo; Mantik, Max; Kaspers, Gertjan

2012-01-01

The influence of parental socio-economic status on childhood cancer treatment outcome in low-income countries has not been sufficiently investigated. Our study examined this influence and explored parental experiences during cancer treatment of their children in an Indonesian academic hospital. Medical charts of 145 children diagnosed with cancer between 1999 and 2009 were reviewed retrospectively. From October 2011 until January 2012, 40 caretakers were interviewed using semi-structured questionnaires. Of all patients, 48% abandoned treatment, 34% experienced death, 9% had progressive/ relapsed disease, and 9% overall event-free survival. Prosperous patients had better treatment outcome than poor patients (Pfate or God (55%). Causes of cancer were thought to be destiny (35%) or God's punishment (23%). Alternative treatment could (18%) or might (50%) cure cancer. Most parents (95%) would like more information about cancer and treatment. More contact with doctors was desired (98%). Income decreased during treatment (55%). Parents lost employment (48% fathers, 10% mothers), most of whom stated this loss was caused by their child's cancer (84% fathers, 100% mothers). Loss of income led to financial difficulties (63%) and debts (55%). Treatment abandonment was most important reason for treatment failure. Treatment outcome was determined by parental socio-economic status. Childhood cancer survival could improve if financial constraints and provision of information and guidance are better addressed.

Homegrown or imported? Frugal innovation and local economic development in Zambia

OpenAIRE

Pesa, I.

2015-01-01

Innovation and entrepreneurship have the potential to stimulate economic growth. Yet it remains unclear whether top-down or bottom-up innovations are more likely to lead to local economic development. By looking at three cases of frugal innovation on the Zambian Copperbelt, in the spheres of housing, water and energy, it will be argued that polycentric innovation (which connects local and international actors) is most likely to generate inclusive development. Yet even a polycentric approach d...

PCR-RFLP Method to Identify Salmonid Species of Economic Importance

Directory of Open Access Journals (Sweden)

Andreea Dudu

2011-05-01

Full Text Available The identification of different fish species by molecular methods has become necessary to avoid both the incorrect labelling of individuals involved in repopulation programmes and the commercial frauds on the fish market. Different fish species of great economical importance, like the salmonids, which are very much requested for their meat, can be identified using molecular techniques such as PCR-RFLP. The method is based on the amplification of a target region from the genome by PCR reaction followed by endonucleases digestion to detect the polymorphism of restriction fragments. In our study we analysed the following salmonid species from Romania: Salmo trutta fario, Salmo labrax, Salvelinus fontinalis, Onchorhynchus mykiss, Thymallus thymallus and Hucho hucho. In order to discriminate between the analysed species we amplified a fragment of mitochondrial genome comprising tRNAGlu/ cytochrome b/ tRNAThr/ tRNAPro/ D-loop/ tRNAPhe, followed by digestion with a specific restriction enzyme. The direct digestion of unpurified PCR products generated species-specific restriction patterns and proved to be a simple, reliable, inexpensive and fast method. Thus, it may be successfully utilized in specialized laboratories for the correct identification of the fish species for multiple purposes, including the traceability of fish food products.

Metal leaching from refinery waste hydroprocessing catalyst.

Science.gov (United States)

Marafi, Meena; Rana, Mohan S

2018-05-18

The present study aims to develop an eco-friendly methodology for the recovery of nickel (Ni), molybdenum (Mo), and vanadium (V) from the refinery waste spent hydroprocessing catalyst. The proposed process has two stages: the first stage is to separate alumina, while the second stage involves the separation of metal compounds. The effectiveness of leaching agents, such as NH 4 OH, (NH 4 ) 2 CO 3 , and (NH 4 ) 2 S 2 O 8 , for the extraction of Mo, V, Ni, and Al from the refinery spent catalyst has been reported as a function of reagent concentration (0.5 to 2.0 molar), leaching time (1 to 6 h), and temperature (35 to 60°C). The optimal leaching conditions were achieved to obtain the maximum recovery of Mo, Ni, and V metals. The effect of the mixture of multi-ammonium salts on the metal extraction was also studied, which showed an adverse effect for Ni and V, while marginal improvement was observed for Mo leaching. The ammonium salts can form soluble metal complexes, in which stability or solubility depends on the nature of ammonium salt and the reaction conditions. The extracted metals and support can be reused to synthesize a fresh hydroprocessing catalyst. The process will reduce the refinery waste and recover the expensive metals. Therefore, the process is not only important from an environmental point of view but also vital from an economic perspective.

Space and economics : An introduction to regional economics

NARCIS (Netherlands)

Heijman, W.J.M.; Schipper, R.A.

2010-01-01

The subject area Regional Economics is becoming more and more topical. This means that in economic analyses the production factor 'space' is of increasing importance. This study book aims to integrate space in the area of General Economics in an analytical way. Models and their applications play a

Breeding programs for the main economically important traits of zebu dairy cattle

Directory of Open Access Journals (Sweden)

Ariosto Ardila Silva

2010-06-01

Full Text Available In tropical regions, Gyr and Guzerat breeds (Bos indicus are most explored for dairy industry and are much more adapted to climate. Gyr and Guzerat are Zebu breeds very common in Brazil and they are being used to generate Bos taurus x Bos indicus crosses in order to combine good production, heat and parasite tolerance on the tropics. Breeding programs for the main economically important traits of Zebu dairy cattle have been recently introduced in Brazil and is based on the use of genetically superior sires in the herds. A major objective of QTL (Quantitative Trait Loci and candidate genes is to find genes and markers that can be implemented in breeding programs across marker assisted selection (MAS. In Zebu dairy cattle MAS could be used to pre-select young candidate bulls to progeny testing, thus increasing selection differentials, shortening generation interval and increasing genetic gain

Recent progress in the development of metallic fuel

International Nuclear Information System (INIS)

Seidel, B.R.; Batte, G.L.; Dodds, N.E.; Lahm, C.E.; Pahl, R.G.; Tsai, H.C.

1990-01-01

Tests to date demonstrate that metallic fuel for advanced liquid metal reactors performs well, is easily reprocessed and refabricated and provides inherent reactor safety within an economic design. The behavior and performance of metallic fuel is key to the demonstration of the Integral Fast Reactor (IFR) concept at Argonne National Laboratory. Since 1985, more than 40 assemblies of experimental fuel in addition to the standard metallic driver fuel for Experimental Breeder Reactor 2 (EBR-2)have been irradiated; several more continue to be designed and fabricated. Results have characterized the influence of a wide range of fabrication, design and material variables upon irradiation behavior throughout the fuel lifetime under normal and upset conditions including operation with breached cladding. Results of test, both in- and out-of-reactor, indicate that metallic fuel is readily and economically fabricated, capable of achieving high exposure and long reactor residence times, and possesses unique and promising safety features. 9 refs., 6 figs

Stephanitis takeyai and S. rhododendri (Heteroptera: Tingidae in Slovakia: first record and economic importance

Directory of Open Access Journals (Sweden)

Barta Marek

2016-04-01

Full Text Available This is the first report on the occurrence of andromeda lace bug, Stephanitis (Stephanitis takeyai Drake and Maa, 1955, and rhododendron lace bug, Stephanitis (Stephanitis rhododendri Horvath, 1905, in Slovakia. Syntopic colonies of both species were found on rhododendron shrubs (Rhododendron sp. in south-western Slovakia in 2015. The feeding of the lace bugs resulted in damage to infested rhododendrons. Leaves turned yellow and brown, prematurely dropped what led to continuous drying up of twigs and the whole plants. Details on morphology of adult stages of the two species, description of damage symptoms and economic importance of these pests are presented and discussed.

A large economic liquid metal reactor for United States utilities

International Nuclear Information System (INIS)

Rodwell, E.

1985-01-01

The United States has demonstrated its ability to build and operate small and medium sized liquid metal reactors and continues to operate the Experimental Breeder Reactor II and the Fast Flux Test Facility to demonstrate long life fuel designs. Similar-sized liquid metal reactors in Europe have been followed by a step-up to the 1200 MWe capacity of the Superphenix plant. To permit the United States to make a similar step-up in capacity, a 1320 MWe liquid metal reactor plant has been designed with the main emphasis on minimizing the specific capital cost in order to be competitive with light water reactor plant and fossil plant alternatives. The design is based on a four parallel heat transport loops arrangement and complies with current regulatory requirements. The primary heat transport loops are now being integrated into the reactor vessel to achieve further reduction in the capital cost

Recycling of spent noble metal catalysts with emphasis on pyrometallurgical processing

Energy Technology Data Exchange (ETDEWEB)

Hagelueken, C. [Degussa Huels AG, Hanau (Germany)

1999-09-01

Precious metal catalysts for catalytic Naphta Reforming, Isomerization, Hydrogenation and other chemical and petrochemical processes are valuable assets for oil refineries and chemical companies. At the end of the service life of a reactor load of catalyst, the efficient and reliable recovery of the precious metals contained in the catalyst is of paramount importance. More than 150 years of technological advances at Degussa-Huels have resulted in refining methods for all kinds of precious metal containing materials which guarantee an optimum technical yield of the precious metals included. The refining of catalysts today is one of the important activities in the precious metals business unit. In the state-of-the-art precious metal refinery at Hanau in the centre of Germany, a wide variety of processes for the recovery of all precious metals is offered. These processes include accurate preparation, sampling and analysis as well as both wet-chemical and pyrometallurgical recovery techniques. Special emphasis in this presentation is laid on the advantages of pyrometallurgical processes for certain kinds of catalysts. To avoid any risks during transport, sampling and treatment of the spent catalyst, all parties involved in the recycling chain strictly have to follow the relevant safety regulations. Under its commitment to 'Responsible Care' standard procedures have been developed which include pre-shipment samples, safety data sheets/questionnaires and inspection of spent catalysts. These measures not only support a safe and environmentally sound catalyst recycling but also enable to determine the most suitable and economic recovery process - for the benefit of the customer. (orig.)

Walter Isard's Contributions to Environmental Economics and Ecological Economics

NARCIS (Netherlands)

Rose, Adam; Folmer, Henk; Nijkamp, Peter

This article summarizes Walter Isard's important contributions to environmental economics and ecological economics. The former is the traditional field that incorporates some limited aspects of the environment into neoclassical economic theory, while the latter is a more comprehensive integration of

Renewable and non-renewable energy consumption and economic growth: Evidence from MENA Net Oil Importing Countries

OpenAIRE

Kahia, Montassar; Ben Aissa, Mohamed Safouane

2014-01-01

In this paper, we use panel cointegration techniques to explore the relationship between renewable and non-renewable energy consumption and economic growth in a sample of 11 MENA Net Oil Importing Countries covering the period 1980–2012. The Pedroni (1999, 2004), Kao(1999) as well as Westerlund(2007) panel cointegration tests indicate that there is a long-run equilibrium relationship between real GDP, renewable energy consumption, non-renewable energy consumption, real gross fixed capital for...

The prospect for recycle of radioactive scrap metals to products for restricted and unrestricted use

International Nuclear Information System (INIS)

Liby, A.L.

1995-01-01

Large quantities of radioactive scrap metals will arise from decontamination and decommissioning of nuclear power plants and DOE facilities. Much of this metal can be easily decontaminated and released to the existing secondary metals industry for recycling. For metal that can not be readily released, recycle into restricted-use end products is an economically attractive alternative to burial as low level radioactive waste. This paper will examine sources and types of scrap metal, technical approaches, potential products, and economics of metals recycle. Construction, licensing, environmental compliance, and possible reuse of existing nuclear facilities for metals recycling will be discussed. (author)

Exploration economics

International Nuclear Information System (INIS)

Mcgill, R.E.

1992-01-01

This paper deals with determining the economic viability of the play or prospect. At the outset, one point is important. Preexploration economists are important because they enable geologists to see if their assumptions will prove profitable. Their assumptions must consider the full range of possible outcomes, even if only some portion of that range may contain prospects or plays that are estimated to be profitable. Play economics are preferable to prospect economics because, being the sum of several prospects, they give a broader view of the investment opportunity. Finally, remember that play and prospect economics are always slightly optimistic. They seldom include all of the exploration and overhead changes that must ultimately be borne by the successful prospects

Economic Sociology and Economics of Convention

DEFF Research Database (Denmark)

Jagd, Søren

This paper is part of a larger exploration of the French Economics of Convention tradition. The aim of the paper is to explore potential themes of common interest to economic sociology and Economics of Conventions. The paper is in two parts. First, I summarise the main theoretical features of EC...... the institutional framework of social action. Second, I explore two issues raised by economics of conventions that may be particularly important to consider for economic sociology. The first issue is the explicit exploration of the consequences of a plurality of forms of justification suggested by Luc Boltanski...... and Laurent Thévenot in ‘économie de la grandeur’. This perspective has already been taken up in economic sociology in David Stark’s notion of a ‘Sociology of Worth’. The second issue, recently suggested by André Orléan, is the need to denaturalise economic theory and economic action to demonstrate the social...

Monitoring of essential and toxic metals in imported herbal teas ...

African Journals Online (AJOL)

Journal of Applied Sciences and Environmental Management ... Teas are the most consumed beverage worldwide after water, and its consumption ... Key words: Herbal teas, food safety, health risk assessment, THQ, EDI, HI, toxic metals ...

One-century sedimentary record of heavy metal pollution in western Taihu Lake, China.

Science.gov (United States)

Li, Yan; Zhou, Shenglu; Zhu, Qing; Li, Baojie; Wang, Junxiao; Wang, Chunhui; Chen, Lian; Wu, Shaohua

2018-05-16

Long-term trends of sediment compositions are important for assessing the impact of human activities on the sediment and protecting the sediment environment. In this study, based on the contents of heavy metals and the Pb isotope ratios in lake sediments, atmospheric dustfall and soil in Yixing, China, the representative heavy metals (Zn, Pb, Cr and Cd) in lake sediments from western Taihu Lake were studied. The evolution history of heavy metals in the local environment was constructed for the past 100 years. From 1892 to the 1990s, the anthropogenic fluxes of the representative heavy metals were negligible, indicating minimal anthropogenic emissions of heavy metals. Since the 1990s, anthropogenic fluxes of the representative heavy metals began to increase, concurrent with the economic growth and development in the western Taihu Lake Basin after the Chinese economic reform. The maximum flux percentage of the heavy metals in the sediments, caused by human activities, is 23.0% for Zn, 31.6% for Pb, 39.5% for Cr and 85.3% for Cd, indicating that most of the Cd comes from human activities. The Cd content in the western Taihu Lake Basin was significantly higher than that in the other areas, and the rapid development of the industry in the western Taihu Lake Basin and ceramics in Yixing led to the enrichment of heavy metals in local sediments. Since the 21st century, measures have been taken to control the pollution of heavy metals, including the increase in local government attention and the deployment of environmental monitoring technology. However, heavy metal content remains high, and the Pb content is still increasing. The ratios of Pb isotopes show that the main sources of heavy metals in the western Taihu Lake sediments, the local soil of Yixing and the atmospheric dustfall are coal combustion, leaded gasoline combustion, industrial wastewater and domestic sewage. Copyright © 2018 Elsevier Ltd. All rights reserved.

Constitutional tolerance to heavy metals of a fiber crop, ramie (Boehmeria nivea), and its potential usage

Energy Technology Data Exchange (ETDEWEB)

Yang, B.; Zhou, M.; Shu, W.S.; Lan, C.Y. [State Key Laboratory of Biocontrol, and School of Life Sciences, Sun Yat-sen (Zhongshan) University, Guangzhou 510275 (China); Ye, Z.H., E-mail: lssyzhh@mail.sysu.edu.c [State Key Laboratory of Biocontrol, and School of Life Sciences, Sun Yat-sen (Zhongshan) University, Guangzhou 510275 (China); Qiu, R.L. [Guangdong Provincial Key Lab of Environmental Pollution Control and Remediation Technology, and School of Sciences and Engineering, Sun Yat-sen (Zhongshan) University, Guangzhou 510275 (China); Jie, Y.C. [Institute of Bast Fiber Crops, Chinese Academy of Agricultural Sciences, Changsha 410205 (China); Cui, G.X. [Ramie Research Institute, Hunan Agricultural University, Changsha 410128 (China); Wong, M.H., E-mail: mhwong@hkbu.edu.h [Croucher Institute for Environmental Sciences, and Department of Biology, Hong Kong Baptist University, Kowloon Tong (Hong Kong)

2010-02-15

It is observed that ramie (Boehmeria nivea), an economic fiber crop, can establish and colonize metal-contaminated sites in China. Metal tolerance and accumulation by ramie originating from 13 metal-contaminated and 4 'clean' sites in China were compared under field and hydroponic conditions. All selected populations and germplasms displayed good growth performance under diverse metal-contaminated habitats; while growth responses, metal accumulation and tolerance were similar among the 8 populations and 2 germplasms when exposed to solutions containing elevated As, Cd, Pb, or Zn in the laboratory. These revealed that ramie possesses a certain degree of constitutional metal tolerance. To our knowledge, this is the first report of constitutional metal tolerance possessed by a fiber crop. Ramie can be considered as a good candidate for both fiber production and phytoremediation of sites contaminated by multi-metals, as it accumulates relative low metal concentrations, but possesses both high biomass and high economic value. - Ramie possesses economic and environmental values in phytoremediation

An anthropometric study of Serbian metal industry workers.

Science.gov (United States)

Omić, S; Brkić, V K Spasojevic; Golubović, T A; Brkić, A D; Klarin, M M

2017-01-01

There are recent studies using new industrial workers' anthropometric data in different countries, but for Serbia such data are not available. This study is the first anthropometric study of Serbian metal industry workers in the country, whose labor force is increasingly employed both on local and international markets. The metal industry is one of Serbia's most important economic sectors. To this end, we collected the basic static anthropometric dimensions of 122 industrial workers and used principal components analysis (PCA) to obtain multivariate anthropometric models. To confirm the results, the dimensions of an additional 50 workers were collected. The PCA methodology was also compared with the percentile method. Comparing both data samples, we found that 96% of the participants are within the tolerance ellipsoid. According to this study, multivariate modeling covers a larger extent of the intended population proportion compared to percentiles. The results of this research are useful for the designers of metal industry workstations. This information can be used in dimensioning the workplace, thus increasing job satisfaction, reducing the risk of injuries and fatalities, and consequently increasing productivity and safety.

Economic losses due to important diseases of bovines in central India

Directory of Open Access Journals (Sweden)

Dhananjay Singh

2014-08-01

Full Text Available Aim: To analyze the factors associated with morbidity and mortality rates as well as to evaluate economic losses due to important diseases of bovines, viz. mastitis, HS and surra in Purvanchal Region of Uttar Pradesh. Materials and Methods: A sample of 300 livestock owners were selected from each of five divisions of Purvanchal region of the state of Uttar Pradesh using multistage stratified sampling with simple random sampling without replacement at village level. The morbidity, mortality and case fatality rates due to different diseases were determined using standard statistical indices. Association between cattle morbidity and mortality rates and different factors was calculated by χ2 Test. The total economic loss due to diseases in bovines was worked out as sum of mortality loss, loss in milk yield and cost of treatment of affected animals. Results: The overall morbidity rates of mastitis, HS and surra in cattle and buffaloes were 15.5%, 7.1% and 5.3%, respectively. The mortality and case fatality due to HS was found higher in the young calves as compared to the adults in case of both buffaloes and cattle. Mortality and case fatality due to surra was greater in the adult animals as compared to the younger ones in case of both buffaloes and cattle. Total losses due to mastitis per lactation in ND cow, CB cow and buffalo were INR 868.34, INR 1, 314.10 and INR 1, 272.36, respectively. Total losses due to HS per animal in ND cows, CB cows and buffaloes were INR 2, 355.78, INR 3, 228.52 and INR 4, 262.57, respectively. Total losses due to surra per animal in ND cow, CB cow and buffalo were INR 3, 328.18, INR 6, 193 and INR 9, 872.33, respectively. Conclusion: The study thus revealed significant losses due to diseases in large ruminants on. There is thus ample scope for preventive measures to control the disease bovines.

Monitoring of essential and toxic metals in imported herbal teas ...

African Journals Online (AJOL)

ADOWIE PERE

ABSTRACT: Teas are the most consumed beverage worldwide after water, and its consumption among. Nigerians has ... toxic metals in food and beverages with regards to the permissible ...... Risk assessment and risk management, in: D.R. ...

The preferred orientation of the metallurgical enterprises of the Urals to the domestic market — one of the most important conditions for economic security

Directory of Open Access Journals (Sweden)

Igor' Il'ich Pichurin

2011-09-01

Full Text Available It this paper, the author tries to show that the export orientation of the Ural metallurgy, perceived until recently as its dignity and therefore encouraged by the authorities, actually poses a threat to economic security of the region. Being the basis of the regional economy and of Sverdlovsk region in particular, metallurgical industry has suffered serious loss during the global crisis of 2008-2009, thereby causing considerable damage to the socio-economic development of the region. It is generally accepted, but considered as a temporary loss, which was compensated at the end of the crisis. The author puts some suggestions forward on reduction of the global demand for metals in the coming decade. The author tries to prove that without reorientation of the Ural metallurgy onto the domestic market, such losses are very likely also in the future after the crisis overcoming.

Extreme conditions synthesis, processing and characterization of metal-nitrides and alloys of mechanical and optoelectronic importance

International Nuclear Information System (INIS)

Serghiou, G; McGaff, A J; Russell, N; Morniroli, J P; Frost, D J; Odling, N; Boehler, R; Troadec, D; Lathe, C

2010-01-01

High density nitrides and group IV alloys are of growing importance for both ceramic and optoelectronic applications. We present here new data and processes in our ongoing preparation of alkaline earth and transition metal nitrides as well as group IV alloys, here, up to 25 GPa and 2300 K. We employ large volume and laser-heated diamond anvil cell techniques for synthesis, processing tools including focused ion beam, and synchrotron X-ray diffraction, transmission electron microscopy and scanning electron microscopy for characterization.

Half-Metallic Ferromagnetism and Stability of Transition Metal Pnictides and Chalcogenides

Science.gov (United States)

Liu, Bang-Gui

It is highly desirable to explore robust half-metallic ferromagnetic materials compatible with important semiconductors for spintronic applications. A state-of-the-art full potential augmented plane wave method within the densityfunctional theory is reliable enough for this purpose. In this chapter we review theoretical research on half-metallic ferromagnetism and structural stability of transition metal pnictides and chalcogenides. We show that some zincblende transition metal pnictides are half-metallic and the half-metallic gap can be fairly wide, which is consistent with experiment. Systematic calculations reveal that zincblende phases of CrTe, CrSe, and VTe are excellent half-metallic ferromagnets. These three materials have wide half-metallic gaps, are low in total energy with respect to the corresponding ground-state phases, and, importantly, are structurally stable. Halfmetallic ferromagnetism is also found in wurtzite transition metal pnictides and chalcogenides and in transition-metal doped semiconductors as well as deformed structures. Some of these half-metallic materials could be grown epitaxially in the form of ultrathin .lms or layers suitable for real spintronic applications.

Ecological economics and economic growth.

Science.gov (United States)

Victor, Peter A

2010-01-01

Boulding's 1966 paper on the economics of spaceship Earth established the framework for ecological economics and an understanding of economic growth. In ecological economics, economies are conceptualized as open subsystems of the closed biosphere and are subject to biophysical laws and constraints. Economic growth measured as an increase in real gross domestic product (GDP) has generally been associated with increases in the use of energy and materials and the generation of wastes. Scale, composition, and technology are the proximate determinants of environmental impacts. They are often reduced to two: scale (GDP) and intensity (impact per unit GDP). New work described in this paper defines "green" growth as intensity that declines faster than scale increases. Similarly, "brown" growth occurs when intensity declines more slowly than increases in scale, and "black" growth happens when both scale and intensity increase. These concepts are then related to the environmental Kuznets curve, which can be understood as a transition from brown to green growth. Ecological economics provides a macroperspective on economic growth. It offers broad policy principles, and it challenges the primacy of economic growth as a policy objective, but many important questions remain.

Economic analysis model for total energy and economic systems

International Nuclear Information System (INIS)

Shoji, Katsuhiko; Yasukawa, Shigeru; Sato, Osamu

1980-09-01

This report describes framing an economic analysis model developed as a tool of total energy systems. To prospect and analyze future energy systems, it is important to analyze the relation between energy system and economic structure. We prepared an economic analysis model which was suited for this purpose. Our model marks that we can analyze in more detail energy related matters than other economic ones, and can forecast long-term economic progress rather than short-term economic fluctuation. From view point of economics, our model is longterm multi-sectoral economic analysis model of open Leontief type. Our model gave us appropriate results for fitting test and forecasting estimation. (author)

[The acerola fruit: composition, productive characteristics and economic importance].

Science.gov (United States)

Mezadri, Tatiana; Fernández-Pachón, Ma Soledad; Villaño, Débora; García-Parrilla, Ma Carmen; Troncoso, Ana M

2006-06-01

The acerola (Malpighia emarginata Sessé y Mociño ex DC) is a wild plant grown in zones of tropical and subtropical climate. Acerola is origin from South of Mexico, Central America and Septentrional area of South America. Its scientific name was adopted in 1986 by the International Council of Vegetable Genetic Resources. Malpighia emarginata has a subglobulose drupa fruit with three seeds which account between the 19 - 25% of the total weight. The diameter and weight of the fruit varies between 1 - 4 cm and 2 - 15 g, respectively. The fruit shows green color when it is developing, which changes to yellow and red tones when it is mature. Each plant produces annually 20 - 30 kg of fruits. This fruit contents macro and micronutrients: proteins (0.21-0.80 g/100 g), fats (0.23-0.80 g/100 g), carbohydrates (3.6-7.80 g/100 g), mineral salts (iron 0.24, calcium 11.7, phosphorus 17.1 mg/100 g) and vitamins (thiamine 0.02, riboflavine 0.07, piridoxine 8.7 mg/100 g). Its high content in vitamin C (695 a 4827 mg/100 g) is remarkable, therefore acerola has an increasing economic value by its great consume during last years. Acerola also presents carotenoids and bioflavonoids which provide important nutritive value and its potential use as antioxidant. Brazil has a climate and soil appropriate for the culture of acerola, thus this country is the main mundial productor. Acerola is commercialised as juices, jams, ices, gelatins, sweets or liquors. Bibliographical data have been mainly supplied by Electronic Resources of the University of Seville and the University do Vale do Itajaí (Santa Catarina, Brazil).

Heavy metal emissions for Danish road transport

Energy Technology Data Exchange (ETDEWEB)

Winther, M.; Slentoe, E.

2010-04-15

This report presents new heavy metal emission factors for cars, vans, trucks, buses, mopeds and motorcycles for each of the emission sources fuel consumption, engine oil, tyre wear, brake wear and road abrasion. The emission components covered are Arsenic (As), Cadmium (Cd), Chromium (Cr), Copper (Cu), Mercury (Hg), Nickel (Ni), Lead (Pb), Selenium (Se) and Zinc (Zn), all of them relevant for emission reporting to the UNECE CLRTAP (United Nations Economic Commission for Europe Convention on Long Range Transboundary Pollutants) convention. The report also presents a new Danish inventory for the year 2007. The following emissions in total TSP (in brackets) are calculated for the year 2007: As (8 kg), Cd (48 kg), Cr (197 kg), Cu (51 779 kg), Hg (28 kg), Ni (158 kg), Pb (6 989 kg), Se (33 kg) and Zn (28 556 kg). Per vehicle type cars are the most important source of emission for all heavy metal species, followed by vans, trucks, buses and 2-wheelers. By using the detailed emission factors and inventory calculation methods established in the present project, estimates of heavy metal emissions can be made for other years than 2007. (author)

Heavy metal pollution in coastal areas of South China: A review

International Nuclear Information System (INIS)

Wang, Shuai-Long; Xu, Xiang-Rong; Sun, Yu-Xin; Liu, Jin-Ling; Li, Hua-Bin

2013-01-01

Highlights: • Heavy metal contamination in coastal areas of South China has been reviewed. • Heavy metal levels were closely related to economic development in past decades. • Heavy metal levels from Hong Kong continually decreased from the early 1990s. • Higher concentrations of heavy metals were found in mollusk. • Levels of heavy metals in part of seafood exceeded the safety limit. -- Abstract: Coastal areas of South China face great challenges due to heavy metal contamination caused by rapid urbanization and industrialization. In this paper, more than 90 articles on levels, distributions, and sources of heavy metals in sediments and organisms were collected to review the status of heavy metal pollution along coastal regions of South China. The results show that heavy metal levels were closely associated with local economic development. Hong Kong and the Pearl River Estuary were severely contaminated by heavy metals. However, concentrations of heavy metals in sediments from Hong Kong have continually decreased since the early 1990s. High levels of heavy metals were found in biota from Lingdingyang in Guangdong province. Mollusks had higher concentrations of heavy metals than other species. Human health risk assessments suggested that levels of heavy metals in some seafood from coastal areas of South China exceeded the safety limit

High-Pressure Thermodynamic Properties of f-electron Metals, Transition Metal Oxides, and Half-Metallic Magnets

International Nuclear Information System (INIS)

Richard T. Scalettar; Warren E. Pickett

2005-01-01

This project involves research into the thermodynamic properties of f-electron metals, transition metal oxides, and half-metallic magnets at high pressure. These materials are ones in which the changing importance of electron-electron interactions as the distance between atoms is varied can tune the system through phase transitions from localized to delocalized electrons, from screened to unscreened magnetic moments, and from normal metal to one in which only a single spin specie can conduct. Three main thrusts are being pursued: (1) Mott transitions in transition metal oxides, (2) magnetism in half-metallic compounds, and (3) large volume-collapse transitions in f-band metals

High-Pressure Thermodynamic Properties of f-electron Metals, Transition Metal Oxides, and Half-Metallic Magnets

Energy Technology Data Exchange (ETDEWEB)

Scalettar, Richard T.; Pickett, Warren E.

2004-07-01

This project involves research into the thermodynamic properties of f-electron metals, transition metal oxides, and half-metallic magnets at high pressure. These materials are ones in which the changing importance of electron-electron interactions as the distance between atoms is varied can tune the system through phase transitions from localized to delocalized electrons, from screened to unscreened magnetic moments, and from normal metal to one in which only a single spin specie can conduct. Three main thrusts are being pursued: (1) Mott transitions in transition metal oxides, (2) magnetism in half-metallic compounds, and (3) large volume-collapse transitions in f-band metals.

High-Pressure Thermodynamic Properties of f-electron Metals, Transition Metal Oxides, and Half-Metallic Magnets

Energy Technology Data Exchange (ETDEWEB)

Richard T. Scalettar; Warren E. Pickett

2005-08-02

This project involves research into the thermodynamic properties of f-electron metals, transition metal oxides, and half-metallic magnets at high pressure. These materials are ones in which the changing importance of electron-electron interactions as the distance between atoms is varied can tune the system through phase transitions from localized to delocalized electrons, from screened to unscreened magnetic moments, and from normal metal to one in which only a single spin specie can conduct. Three main thrusts are being pursued: (i) Mott transitions in transition metal oxides, (ii) magnetism in half-metallic compounds, and (iii) large volume-collapse transitions in f-band metals.

Radiation protection aspects in importing metallic scraps; Problemi di radioprotezione connessi con l`importazione di rottami metallici

Energy Technology Data Exchange (ETDEWEB)

Risica, S.; Di Ciacco, P. [Istituto Superiore di Sanita`, Rome (Italy). Laboratorio di Fisica

1996-09-01

The meeting deals with radiation protection problems caused by the possibility that radioactive metal scraps or radioactive sources hidden in the scraps, may arrive in a foundry. The importance of this issue and of rational and systematic solutions is showed by several accidents, happened in the past in numerous countries, by many signals in Italy and by some papers published in international scientific journals or reports issued by authorities and institutions in different countries.

The importance and role of theoretical economics in contemporary higher educational process with a review of the situation in Bosnia and Herzegovina

Directory of Open Access Journals (Sweden)

Slijepčević Đoko

2012-01-01

Full Text Available After pointing out the importance and role of theoretical economics in contemporary higher education and in creation of a long-term stable and successful economic and general social development, the authors analyze in this paper the status of theoretical economics and representation of theoretical economics courses (Political economy, Economic Doctrines, Macroeconomics, Microeconomics... in the Curricula of the Faculties of Economics and other Faculties in Bosnia and Herzegovina (BiH (Law, Political Science. Thereby it is ascertained that Neo-Liberal School and its concepts still dominate in both, economic politics of transition, and in creation of Curricula within the Bologna System of Higher Education in BiH and its entities. However, the Neo-Liberal School has been undergoing a crisis for a long time, as it is not able to explain properly neither the global financial crisis, nor the transitional processes and crisis in BiH. Therefore, the knowledge of Keynesian, Marxist, and other schools of economic thought and learning, should be used more in creating the Curricula of general education courses. In analyzing the representation and role of courses of theoretical character in current high education of economists, lawyers and political scientists in BiH, the authors highlight the thesis that 'Political Economics' and other disciplines of theoretical economics have been repressed, while business and specialist disciplines, which study the skills and techniques of business management, are more and more present. The authors consider that this state of affairs is unacceptable and that it should be changed in direction of reaffirmation of 'Political Economics' and other general education disciplines from theoretical economics domain, since only these disciplines provide fundamental knowledge for creation of economic system, economic policy and achievement of a successful economic and general development of every socio-political community.

Metals in coastal zones impacted with urban and industrial wastes: Insights on the metal accumulation pattern in fish species

Science.gov (United States)

La Colla, Noelia S.; Botté, Sandra E.; Marcovecchio, Jorge E.

2018-05-01

The pollution of aquatic environments is a worldwide problem of difficult solution since these areas are used for the disposal and dilution of anthropogenic wastes. This study evaluated the concentrations of Cd, Cu, Ni and Zn in the gills, liver and muscle tissues of six economically important fish species from the Bahía Blanca estuary in Argentina, a coastal environment that is under anthropogenic pressure. Metal contents in 147 fish samples were determined by digestion and a subsequent analysis with an ICP OES. The concentrations (μg/g, wet weight) of each metal in the fish tissues ranged from below the limit of detection for the four metals to 5.2 in the case of Cd, 340 for Cu, 20 for Ni, and 101 for Zn. The results suggested that metal burden in fishes varied with the species and metal elements, with Cd, Cu and Zn mean maximum accumulation towards the liver tissue. Ni showed a high number of samples with concentrations below the limit of detection. Among species, Cynoscion guatucupa was found to have the highest concentrations of Cu and Zn in the liver tissues, whereas the gills and liver tissues of Mustelus schmitti showed the lowest levels of Ni and Zn. As regards the human health risks, two samples of muscle tissue belonging to C. guatucupa reached to Cd levels that exceeded the permissible levels for human consumption. Moreover, the estimated daily intakes calculated suggest that people would not experience significant health risks from the intake of individual metals through fish consumption.

Socio-economic importance of environmentally sustainable nature tourism in Pakistan

International Nuclear Information System (INIS)

Siddiqui, S.

2005-01-01

The research paper deals with the nature tourism which is defined as unremunerated visits by local and foreign mountaineers, trekkers and rock climbers to the mountainous areas in Gilgit, Skardu and Chitral. Pakistan is gifted with one of the richest and unique collection of high mountains with three spectacular mountain ranges of the world Karakoram, Hindukush and Himalayas located in the Northern Areas. These ranges have more than 700 peaks above 6000 meters, with as many as 160 peaks rising above 7000 meters. Five out of the total fourteen peaks rising above eight thousand meters, namely K-2, Nanga Parbat, the Hidden Peak Gasherbrum-I, the Broad peak and the Gasherbrum-ll, situated within 20 Kms radius around famous glacial junction-Concordia in Karakoram. Nature Tourism besides being of importance to Federal Government as a source of foreign exchange earnings through royalty and trekking fees, tt is of particular importance for the local economy in the Northern Areas where nature tourists generate considerable economic activities. The Research Paper intends to study and analyze prospects and scope of Nature Tourism in Pakistan with a view to highlight dangers of environmental degradation and suggest balanced set of measures for promoting nature tourism with minimal negative environmental impact. The Research study is primarily based on secondary data collected by Ministry of Tourism during debriefing of mountaineers and trekkers, supplemented with primary data collected through self completion questionnaire and structured interview of Adventure and participants of International Conference on sustainable Tourism -New Vision and the Moving Force for Poverty Alleviation, held in Lahore on April 12 -13, 2005 Tour Operators. The analysis shows that owing to relatively small size of nature tourism environmental condition in Pakistan is not as bad as it might be in other comparable countries. Nevertheless with the growing volume of nature tourism there is a need to

The importance of the Maillard-metal complexes and their silicates in astrobiology

Science.gov (United States)

Liesch, Patrick J.; Kolb, Vera M.

2007-09-01

The Maillard reaction occurs when sugars and amino acids are mixed together in the solid state or in the aqueous solution. Since both amino acids and sugar-like compounds are found on meteorites, we hypothesized that they would also undergo the Maillard reaction. Our recent work supports this idea. We have shown previously that the water-insoluble Maillard products have substantial similarities with the insoluble organic materials from the meteorites. The Maillard organic materials are also part of the desert varnish on Earth, which is a dark, shiny, hard rock coating that contains iron and manganese and is glazed in silicate. Rocks that are similar in appearance to the desert varnish have been observed on the Martian surface. They may also contain the organic materials. We have undertaken study of the interactions between the Maillard products, iron and other metals, and silicates, to elucidate the role of the Maillard products in the chemistry of desert varnish and meteorites. Specifically, we have synthesized a series of the Maillard-metal complexes, and have tested their reactivity towards silicates. We have studied the properties of these Maillard-metal-silicate products by the IR spectroscopy. The astrobiological potential of the Maillard-metal complexes is assessed.

Green Algae from Coal Bed Methane Ponds as a Source of Fertilizer for Economically Important Plants of Montana

Science.gov (United States)

Ogunsakin, O. R.; Apple, M. E.; Zhou, X.; Peyton, B.

2016-12-01

The Tongue River Basin of northeastern Wyoming and southeastern Montana is the location of natural gas reserves and coal bed methane (CBM) acreage. Although the water that emanates from CBM extraction varies with site, it is generally of higher quality than the waters produced by conventional oil and gas wells, in part because it is low in volatile organic compounds. However, since CBM water contains dissolved solids, including sodium (Na), bicarbonate (HCO3) and chloride (Cl) ions, the water must be treated before it can be discharged into the river or wetlands, or used for stock ponds or irrigation. Several ponds have been constructed to serve as a holding facility for CBM water. Algae from the CBM ponds of the Tongue River Basin have the potential to be utilized as fertilizer on economically important plants of Montana. Two very important crop plants of Montana are wheat, Triticum aestivum, and potatoes, Solanum tuberosum. To explore this potential, isolates of unicellular green algae (Chlorella sp.) from the CBM ponds were cultured in aerated vessels with Bold's Basic Growth Medium and natural and/or supplemental light. Algal biomass was condensed in and collected from a valved funnel, after which cell density was determined via light microscopy and a hemacytometer. Algal/water slurries with known nutrient contents were added to seedlings of hard winter wheat, T.aestivum, grown in a greenhouse for three months before harves. When compared to wheat provided with just water, or with water and a commercially available fertilizer, the wheat fertilized with algae had a higher chlorophyll content, more tillers (side shoots), and a higher ratio of influorescences (groups of flowers) per stem. In a related experiment, Ranger Russet seed potatoes, S. tuberosum were given just water, water and Hoagland's nutrient solution, or water with algae in order to compare aboveground growth and potato production among the treatments. The results of this study suggest that

High sensitivity of metal footprint to national GDP in part explained by capital formation

Science.gov (United States)

Zheng, Xinzhu; Wang, Ranran; Wood, Richard; Wang, Can; Hertwich, Edgar G.

2018-04-01

Global metal ore extraction tripled between 1970 and 2010 as metals are widely used in new infrastructure and advanced technology. Meanwhile, the energy and environmental costs of metal mining increase as lower ore grades are being exploited. The domestic use of metals has been found to reach a plateau when gross domestic product reaches US15,000 per person. Here we present a quantification of the annual metal footprint (that is, the amount of metal ore extracted to satisfy the final demand of a country, including metals used abroad to produce goods that are then imported, and excluding metals used domestically to produce exports) for 43 large economies during 1995-2013. We use a panel analysis to assess short-term drivers of changes in metal footprint, and find that a 1% rise in gross domestic product raises the metal footprint by as much as 1.9% in the same year. Further, every percentage point increase in gross capital formation as a share of gross domestic product increased the metal footprint by 2% when controlling for gross domestic product. Other socioeconomic variables did not significantly influence the metal footprint. Finding ways to break the strong coupling of economic development and investment with metal ore extraction may be required to ensure resource access and a low-carbon future.

Water infrastructure for human and economic development

CSIR Research Space (South Africa)

Wall, K

2010-01-01

Full Text Available quality as it gives rise to waterborne diseases such as cholera, bacterial infections, heavy metal accumulation and endocrine disrupting substances; and ? Poor quality irrigation water has a ripple effect ? for example, health inspectors may have... to reject export fruit because of bacterial contamination or bioaccumulation of heavy metals. Economic growth implies industrialisation and urbanisation, which will result in further deterioration of our water resources. The National Water Resource...

Waste printing paper as analogous adsorbents for heavy metals in ...

African Journals Online (AJOL)

user

heavy metals uptake from aqueous solutions but the recovery efficacy as economic and environmental ... system. 1 . Wastes containing metals are directly or indirectly discharge into the environment ... According to World health Organization. 5.

Characteristics comparison of weld metal zones welded to cast and forged steels for piston crown material

Science.gov (United States)

Moon, Kyung-Man; Kim, Yun-Hae; Lee, Myeong-Hoon; Baek, Tae-Sil

2015-03-01

An optimum repair welding for the piston crown which is one of the engine parts exposed to the combustion chamber is considered to be very important to prolong the engine lifetime from an economical point of view. In this study, two types of filler metals such as 1.25Cr-0.5Mo, 0.5Mo were welded with SMAW method and the other two types of filler metals such as Inconel 625 and 718 were welded with GTAW method, respectively, and the used base metals were the cast and forged steels of the piston crown material. The weld metal zones welded with Inconel 625 and 718 filler metals exhibited higher corrosion resistance compared to 1.25Cr-0.5Mo and 0.5Mo filler metals. In particular, the weld metal zone welded with Inconel 718 and 0.5Mo, filler metals indicated the best and worst corrosion resistance, respectively. Consequently, it is suggested that the corrosion resistance of the weld metal zone surely depends on the chemical components of each filler metal and welding method irrespective of the types of piston crown material.

Liquid metal MHD generator systems

International Nuclear Information System (INIS)

Satyamurthy, P.; Dixit, N.S.; Venkataramani, N.; Rohatgi, V.K.

1985-01-01

Liquid Metal MHD (LMMHD) Generator Systems are becoming increasingly important in space and terrestrial applications due to their compactness and versatility. This report gives the current status and economic viability of LMMHD generators coupled to solar collectors, fast breeder reactors, low grade heat sources and conventional high grade heat sources. The various thermodynamic cycles in the temperatures range of 100degC-2000degC have been examined. The report also discusses the present understanding of various loss mechanisms inherent in LMMHD systems and the techniques for overcoming these losses. A small mercury-air LMMHD experimental facility being set up in Plasma Physics Division along with proposals for future development of this new technology is also presented in this report. (author)

Fernald scrap metal recycling and beneficial reuse

International Nuclear Information System (INIS)

Motl, G.P.; Burns, D.D.

1993-10-01

The Fernald site, formerly the Feed Materials Production Facility, produced uranium metal products to meet defense production requirements for the Department of Energy from 1953 to 1989. In this report is is described how the Fernald scrap metal project has demonstrated that contractor capabilities can be used successfully to recycle large quantities of Department of Energy scrap metal. The project has proven that the open-quotes beneficial reuseclose quotes concept makes excellent economic sense when a market for recycled products can be identified. Topics covered in this report include the scrap metal pile history, the procurement strategy, scrap metal processing, and a discussion of lessons learned

A decade of advances in metallic fuel

International Nuclear Information System (INIS)

Lahm, C.E.; Pahl, R.G.; Porter, D.L.; Tsai, H.; Seidel, B.R.; Batte, G.L.; Dodds, N.E.; Hofman, G.L.; Walters, L.C.

1991-01-01

Significant advances in the understanding of behavior and performance of metallic fuels to high burnup have been achieved over the past four decades. Metallic fuels were the first fuels for liquid-metal-cooled fast reactors (LMR) but in the late 1960's worldwide interest turned toward ceramic fuels before the full potential of metallic fuel could be achieved. Now metallic fuels are recognized as a preferred viable option with regard to safety, integral fuel cycle, waste minimization and deployment economics. This paper reviews the key advances in the last decade and highlights the behavior and performance features which have demonstrated a much greater potential than previously expected

Proposal for the Development of an Economic Operator's Socially Responsible Management, by Manufacturing Metallic Objects for the Children's Play, both Outdoors and Indoors

Directory of Open Access Journals (Sweden)

Potincu L.

2014-12-01

Full Text Available This scientific paper intends to practically approach aspects related to socially responsible management by relating it to the activity of an economic operator manufacturing metal objects. The development of the socially responsible management is approached in relation to the responsibilities which are part of the corporate social responsibility concept (CSR. Thus, in our research, we have especially used juridical analysis methods and juridical proposals (de lege ferenda proposals, but also several elements belonging to other research fields.

On dithiothreitol (DTT as a measure of oxidative potential for ambient particles: evidence for the importance of soluble ewline transition metals

Directory of Open Access Journals (Sweden)

J. G. Charrier

2012-10-01

Full Text Available The rate of consumption of dithiothreitol (DTT is increasingly used to measure the oxidative potential of particulate matter (PM, which has been linked to the adverse health effects of PM. While several quinones are known to be very reactive in the DTT assay, it is unclear what other chemical species might contribute to the loss of DTT in PM extracts. To address this question, we quantify the rate of DTT loss from individual redox-active species that are common in ambient particulate matter. While most past research has indicated that the DTT assay is not sensitive to metals, our results show that seven out of the ten transition metals tested do oxidize DTT, as do three out of the five quinones tested. While metals are less efficient at oxidizing DTT compared to the most reactive quinones, concentrations of soluble transition metals in fine particulate matter are generally much higher than those of quinones. The net result is that metals appear to dominate the DTT response for typical ambient PM_2.5 samples. Based on particulate concentrations of quinones and soluble metals from the literature, and our measured DTT responses for these species, we estimate that for typical PM_2.5 samples approximately 80% of DTT loss is from transition metals (especially copper and manganese, while quinones account for approximately 20%. We find a similar result for DTT loss measured in a small set of PM_2.5 samples from the San Joaquin Valley of California. Because of the important contribution from metals, we also tested how the DTT assay is affected by EDTA, a chelator that is sometimes used in the assay. EDTA significantly suppresses the response from both metals and quinones; we therefore recommend that EDTA should not be included in the DTT assay.

Culturally and economically important nontimber forest products of northern Maine

Science.gov (United States)

Michelle J. Baumflek; Marla R. Emery; Clare. Ginger

2010-01-01

Nontimber forest products (NTFPs) gathered for food, medicine, craft, spiritual, aesthetic, and utilitarian purposes make substantial contributions to the economic viability and cultural vitality of communities. In the St. John River watershed of northern Maine, people identifying with cultural groups including Acadian, Maliseet, Mi'kmaq, Scotch-Irish, and Swedish...

Contamination with heavy metals and bacteria in some local and imported fish and fish products

International Nuclear Information System (INIS)

Salem, S.B.; El-Dashlout, A.A.; El-Schiwee, M.A.; EL-Shourbagy, G.A.; Ibrahim, R.E.

2004-01-01

Some local and imported fish and fish products sold in retail markets of three cities at Sharkia Governorate, Egypt, were examined against heavy metals contamination (i.e. Pb, Cd and Hg) and the presence of some specific groups of bacteria. The results showed that concentrations of Pb in fresh and frozen fish, salted and smoked fish and canned fish samples were lower than the permissible limits recommended by the Egyptian Organization 1993 (1.0 mg/kg). On the other hand, all the tested fish and fish products of collected samples showed levels of Cd (0.29-0.41 mg/kg) higher than the permissible limit (0.10 mg/kg) recommended by the Egyptian Organization. Such limits should be re-considered because the limit determined by WHO (1992) was 0.5 mg/kg. Mercury level in fresh mullet was equal or lower (0.46-0.50 mg/kg) than the limit of Egyptian Organization (0.50 mg/kg) while other fresh and frozen fish, salted and smoked fish samples had higher Hg than the allowance. In most cases, imported canned products of sardine, mackerel and tuna had higher Pb, Cd and Hg concentrations than that found in the local ones. Among fresh fish samples, such as mackarona, contained the highest total bacterial count, while mullet was the lowest. Considering salted and smoked fish, heavy salted mullet had the highest total bacterial count, while the lowest number was recorded in salted sardine. Smoked herring showed lowest total bacterial count than salted samples. Generally, no correlation was observed between fish species or consumption place and the contamination with heavy metals and bacteria

A Review of Eight High-Priority, Economically Important Viral Pathogens of Poultry within the Caribbean Region

Science.gov (United States)

Gongora, Victor; Hartley, Dane; Oura, Christopher

2018-01-01

Viral pathogens cause devastating economic losses in poultry industries worldwide. The Caribbean region, which boasts some of the highest rates of poultry consumption in the world, is no exception. This review summarizes evidence for the circulation and spread of eight high-priority, economically important poultry viruses across the Caribbean region. Avian influenza virus (AIV), infectious bronchitis virus (IBV), Newcastle disease virus (NDV), infectious laryngotracheitis virus (ILTV), avian metapneumovirus (aMPV), infectious bursal disease virus (IBDV), fowl adenovirus group 1 (FADV Gp1), and egg drop syndrome virus (EDSV) were selected for review. This review of serological, molecular, and phylogenetic studies across Caribbean countries reveals evidence for sporadic outbreaks of respiratory disease caused by notifiable viral pathogens (AIV, IBV, NDV, and ILTV), as well as outbreaks of diseases caused by immunosuppressive viral pathogens (IBDV and FADV Gp1). This review highlights the need to strengthen current levels of surveillance and reporting for poultry diseases in domestic and wild bird populations across the Caribbean, as well as the need to strengthen the diagnostic capacity and capability of Caribbean national veterinary diagnostic laboratories. PMID:29373488

A Review of Eight High-Priority, Economically Important Viral Pathogens of Poultry within the Caribbean Region

Directory of Open Access Journals (Sweden)

Arianne Brown Jordan

2018-01-01

Full Text Available Viral pathogens cause devastating economic losses in poultry industries worldwide. The Caribbean region, which boasts some of the highest rates of poultry consumption in the world, is no exception. This review summarizes evidence for the circulation and spread of eight high-priority, economically important poultry viruses across the Caribbean region. Avian influenza virus (AIV, infectious bronchitis virus (IBV, Newcastle disease virus (NDV, infectious laryngotracheitis virus (ILTV, avian metapneumovirus (aMPV, infectious bursal disease virus (IBDV, fowl adenovirus group 1 (FADV Gp1, and egg drop syndrome virus (EDSV were selected for review. This review of serological, molecular, and phylogenetic studies across Caribbean countries reveals evidence for sporadic outbreaks of respiratory disease caused by notifiable viral pathogens (AIV, IBV, NDV, and ILTV, as well as outbreaks of diseases caused by immunosuppressive viral pathogens (IBDV and FADV Gp1. This review highlights the need to strengthen current levels of surveillance and reporting for poultry diseases in domestic and wild bird populations across the Caribbean, as well as the need to strengthen the diagnostic capacity and capability of Caribbean national veterinary diagnostic laboratories.

Economic analysis of fusion breeders

International Nuclear Information System (INIS)

Delene, J.G.

1985-01-01

This paper presents a study of the economic performance of Fission/Fusion Hybrid devices. This work takes fusion breeder cost estimates and applies methodology and cost factors used in the fission reactor programs to compare fusion breeders with Liquid Metal Fast Breeder Reactors (LMFBR). The results of the analysis indicate that the Hybrid will be in the same competitive range as proposed LMFBRs and have the potential to provide economically competitive power in a future of rising uranium prices. The sensitivity of the results to variations in key parameters is included

International mineral economics

International Nuclear Information System (INIS)

Gocht, W.R.; Eggert, R.G.

1988-01-01

International Mineral Economics provides an integrated overview of the important concepts. The treatment is interdisciplinary, drawing on the fields of economics, geology, business, and mining engineering. Part I examines the technical concepts important for understanding the geology of ore deposits, the methods of exploration and deposit evaluation, and the activities of mining and mineral processing. Part II focuses on the economic and related concepts important for understanding mineral development, the evaluation of exploration and mining projects, and mineral markets and market models. Finally, Part III reviews and traces the historical development of the policies of international organizations, the industrialized countries, and the developing countries. (orig.)

Heavy metal sorption by microalgae

International Nuclear Information System (INIS)

Sandau, E.; Sandau, P.; Pulz, O.

1996-01-01

Viable microalgae are known to be able to accumulate heavy metals (bioaccumulation). Against a background of the increasing environmental risks caused by heavy metals, the microalgae Chlorella vulgaris and Spirulina platensis and their potential for the biological removal of heavy metals from aqueous solutions were taken as an example for investigation. Small-scale cultivation tests (50 l) with Cd-resistant cells of Chlorella vulgaris have shown that approx. 40% of the added 10 mg Cd/l was removed from the solution within seven days. At this heavy metal concentration sensitive cells died. Non-viable microalgae are able to eliminate heavy metal ions in a short time by biosorption in uncomplicated systems, without any toxicity problems. Compared with original biomasses, the sorption capacity of microalgal by-products changes only insignificantly. Their low price makes them economical. (orig.)

Tracking cashew economically important diseases in the West African region using metagenomics

Science.gov (United States)

Monteiro, Filipa; Romeiras, Maria M.; Figueiredo, Andreia; Sebastiana, Mónica; Baldé, Aladje; Catarino, Luís; Batista, Dora

2015-01-01

During the last decades, agricultural land-uses in West Africa were marked by dramatic shifts in the coverage of individual crops. Nowadays, cashew (Anacardium occidentale L.) is one of the most export-oriented horticulture crops, notably in Guinea-Bissau. Relying heavily on agriculture to increase their income, developing countries have been following a strong trend of moving on from traditional farming systems toward commercial production. Emerging infectious diseases, driven either by adaptation to local conditions or inadvertent importation of plant pathogens, are able to cause tremendous cashew production losses, with economic and social impact of which, in developing countries is often underestimated. Presently, plant genomics with metagenomics as an emergent tool, presents an enormous potential to better characterize diseases by providing extensive knowledge on plant pathogens at a large scale. In this perspective, we address metagenomics as a promising genomic tool to identify cashew fungal associated diseases as well as to discriminate the causal pathogens, aiming at obtaining tools to help design effective strategies for disease control and thus promote the sustainable production of cashew in West African Region. PMID:26175748

Tracking cashew economically important diseases in the West African region using metagenomics

Directory of Open Access Journals (Sweden)

Filipa eMonteiro

2015-06-01

Full Text Available During the last decades, agricultural land-uses in West Africa were marked by dramatic shifts in the coverage of individual crops. Nowadays, cashew (Anacardium occidentale L. is one of the most export-oriented horticulture crops, notably in Guinea-Bissau. Relying heavily on agriculture to increase their income, developing countries have been following a strong trend of moving on from traditional farming systems towards commercial production. Emerging infectious diseases, driven either by adaptation to local conditions or inadvertent importation of plant pathogens, are able to cause tremendous cashew production losses, with economic and social impact of which, in developing countries is often underestimated. Presently, plant genomics with metagenomics as an emergent tool, presents an enormous potential to better characterize diseases by providing extensive knowledge on plant pathogens at a large scale. In this perspective, we address metagenomics as a promising genomic tool to identify cashew fungal associated diseases as well as to discriminate the causal pathogens, aiming at obtaining tools to help design effective strategies for disease control and thus promote the sustainable production of cashew in West African region.

Economic openness and economic growth: A cointegration analysis for ASEAN-5 countries

Directory of Open Access Journals (Sweden)

Klimis Vogiatzoglou

2016-11-01

Full Text Available The paper considers three channels of economic openness, namely FDI, imports, and exports, and examines their short-run and long-run effects on the economic growth in the five founding member countries of the Association of Southeast Asian Nations (ASEAN over the period from 1980 to 2014. Besides the impact on the economic growth, the authors analyze all possible causal interrelationships to discern patterns and directions of causality among FDI, imports, exports, and GDP. The quantitative analysis, which is based on the vector error correction co-integration framework, is conducted separately for each country in order to assess their individual experiences and allow for a comparative view. Although the precise details differ across countries, the findings indicate that there is a long-run equilibrium relationship between economic openness and GDP in all ASEAN-5 economies. FDI, imports and exports have a significantly positive short-run and long-run impact on the economic growth. Our results also show that export-led growth is the most important economic growth factor in most countries, followed by FDI-led growth. Another crucial finding is the bi-directional causality between exports and FDI across the ASEAN-5 countries. This indicates the presence of direct and indirect effects on GDP and a self-reinforcing process of causality between those two variables, which strengthens their impact on the economic growth.

The economic aspect

International Nuclear Information System (INIS)

MacKerron, G.

1984-01-01

The subject is covered in sections: introduction (indicating the importance of 'back end' operations in the economics of nuclear power production); irradiated fuel transport costs in the UK (the Sizewell PWR; existing UK reactors); economic appraisal; past nuclear economics; future nuclear economics; (electricity demand; technological maturity; social and political factors; competition to nuclear power). (U.K.)

CURRENT ACCOUNT DEFICIT AND ECONOMIC GROWTH IN ARMENIA

Directory of Open Access Journals (Sweden)

Arus Tunian

2015-07-01

Full Text Available The article is devoted to the study of the problem of economic growth in Armenia. It is identified the nature of the balance of payments of the country, indicating a net debtor position, which leads to inherent deterioration of the international investment position. A small open economy of Armenia moves to a new phase of development, in the frame of the integration processes within the Customs Union and the Eurasian Economic Union of Russia, Belarus and Kazakhstan. One of the main characteristics of the Armenian economy vulnerability remains a negative balance in foreign trade, which continues to grow, despite the export growth. Economic growth is provided, as before, mostly due to the sale of raw materials - non-ferrous metals and metal ores, both in the primary as well as in the previous preprocessing. Estimating the econometric VAR models revealed that the negative current account impacts on GDP growth negatively.

IMPORTANCE OF REGIONAL DEVELOPMENT PROGRAMS FOR THE ECONOMIC GROWTH OF RURAL AREAS

Directory of Open Access Journals (Sweden)

Dorosh A.

2017-05-01

Full Text Available Article determine the essence of the definition of "region", defined types of regions. In general, we can distinguish four types of regions, formed to implement the tasks under different direction: a homogeneous regions (formed on the basis of common characteristics – mountain region, economically developed / underdeveloped region and so on.. b functional regions (formed by determining the basic type of economic activity – touristic region, agricultural region, etc.. c administrative regions (formed by pre-defined criteria for performing administrative functions in a particular area – district, local council, etc.. d personal perception regions (based on personal values – Homeland and so on.. The focus of this publication focuses on the study of rural regions. As a result of studies is found that the population of Ukraine decreased by about 7 million Inhabitants. In 1993 there was 52.2 million of people, and in 2016 dropped to 42.7 million (temporary occupied territories excluded. Determined that the most influential factors are the degradation of rural region’s economic and demographic crisis (can be both a cause and consequence of each other. In this regard, the worsening of demographic situation is the biggest problem, because without human resources economic growth can’t be achieved. For more profound understanding of the problem we used the spiral of negative developed of communities/regions proposed by Austrian scientists G. Weber and T. Fisher. It indicates the relationship between adverse events and their sequence. This choice is not accidental, because the spiral indicates that this is a progressive movement that eventually accelerated and the difficulty of stopping the negative processes increases not arithmetically but geometrically. Therefore, developing regional programs of rural development moderators (selected and trained specialists who work in the region cooperate with the heads of communities and local residents

Agglomeration Economies, Economic Growth and the New Economic Geography in Mexico

OpenAIRE

Alejandro Diaz-Bautista

2005-01-01

The present study of regional economic growth in Mexico is based on the new economic geography, where distance plays an important role in explaining urban regional economic growth. The results show that distance to the northern border of Mexico and labor migration between states of Mexico, after the passage of NAFTA are important factors that explain the regional state growth and agglomerations in Mexico between 1994 and 2000. The results also indicate that job growth and FDI are not signific...

Tritium in metals

International Nuclear Information System (INIS)

Schober, T.

1990-01-01

In this Chapter a review is given of some of the important features of metal tritides as opposed to hydrides and deuterides. After an introduction to the topics of tritium and tritium in metals information will be presented on a variety of metal-tritium systems. Of main interest here are the differences from the classic hydrogen behavior; the so called isotope effect. A second important topic is that of aging effects produced by the accumulation of 3 He in the samples. (orig.)

A Phylogenetic Analysis of Chloroplast Genomes Elucidates the Relationships of the Six Economically Important Brassica Species Comprising the Triangle of U

NARCIS (Netherlands)

Li, Peirong; Zhang, Shujiang; Li, Fei; Zhang, Shifan; Zhang, Hui; Wang, Xiaowu; Sun, Rifei; Bonnema, Guusje; Borm, Theo J.A.

2017-01-01

The Brassica genus comprises many economically important worldwide cultivated crops. The well-established model of the Brassica genus, U’s triangle, consists of three basic diploid plant species (Brassica rapa, Brassica oleracea, and Brassica nigra) and three amphidiploid species (Brassica napus,

Recycling of metals from metal containing industrial wastes by means of plasma

International Nuclear Information System (INIS)

Burkhard, R.

1995-01-01

Recovery of metals from complex mixed wastes is a challenging task of modern material and waste management strategies. Thermal methods are an important tool in this respect. Plasma turned out to be particularly useful for treatment of complex or toxic wastes and residuals. In order to study the recycling parameters and behaviour of different metal containing wastes at reasonable costs, two pilot plasma plants have been used and metal containing, industrial wastes like spent Raney-Nickel catalysts, copper and aluminium drosses, MMC's, scrap, and others were investigated. The heart of the plasma equipment used is the Rotating Hearth (PRH) with a central base orifice. The hearth of the furnace rotates with a speed which prevents the melt from dripping. For pouring, the rotational speed is lowered, which allows the melt to be dripped into a mould. The RIF2 is equipped with a transferred plasma torch which can be operated up to 200 kW. The furnace is equipped with a secondary combustion chamber (SCC). The gases leaving the SCC go through a quench/scrubber. A powerful fan maintains underpressure in the whole system. Waste and additives can be fed through a nitrogen-purged port batchwise or with a screw feeder. The main components of the waste material investigated are nickel and aluminium in Raney-Nickel. The goal to recycle it is to produce NiFe-alloys for further use in the steel industry, or even NiAl-alloy for new catalyst production by using aluminium scrap as reducing and alloying element respectively. Aluminium dross occurs as an unavoidable by-product of all aluminium melting operations. It consists of metallic aluminium, oxides, nitrides, and salts. The separation of the aluminium phase from the oxides is the main task for recycling the aluminium. The general result is: recovery of metals out of complex mixed waste by using plasma rotating hearth technology and appropriate furnace modifications is feasible and ecological-economically interesting. (author) 147

BIOSORBENTS – PROSPECTIVE MATERIALS FOR HEAVY METAL IONS EXTRACTION FROM WASTEWATER

Directory of Open Access Journals (Sweden)

О. Kovalenko

2018-04-01

Full Text Available The article deals with ecological safety, resource saving, economic efficienty in the technologies of wastewater purification from heavy metals ions. It is shown that modern technologies of wastewater purification from such substances need to be improved. А promising way to solve this problem is the production and wide use of carbon sorbents obtained from the waste of processing agricultural raw materials and waste generated at food enterprises. Scientific research is actively carried out in this area. This is due to the possibility of organizing the process of wastewater purification from heavy metal ions in a cheap and effective way. The development of biosorbent production is relevant for Ukraine, as the development of agriculture and food industry is of primary importance. The article presents the results of an analytical review of literary sources on various aspects of the scientific problem. In particular, possible sources of raw materials for the production of biosorbents, classical and modified technologies for their production, mechanisms of biosorption using raw materials with different chemical composition, sorption characteristics of biosorbents, and indicators of the economic efficiency of their production are considered.

Application of ion implantation in metals and alloys

International Nuclear Information System (INIS)

Dearnaley, G.

1981-01-01

Ion implantation first became established as a precise method of introducing dopant elements into semiconductors. It is now appreciated that there may be equally important applications in metallic tools or components with the purpose of improving their resistance to wear, fatigue or corrosion. Nitrogen ions implanted into steels pin dislocations and thereby harden the metal. Some metallic ions such as yttrium reduce the tendency for oxidative wear. There is a fairly good understanding of how both treatments can provide a long-lasting protection that extends to many times the original depth of implantation. Nitrogen implantation also improves the wear resistance of Co-cemented tungsten carbide and of hard chromium electroplated coatings. These treatments have wide application in press tools, molds, dies and other metal-forming tools as well as in a more limited variety of cutting tools. Some striking improvements can be achieved in the corrosion field, but there are economic and technical reasons for concluding that practical applications of ion implantation will be more restricted and specialized in this area. The most promising area is that in which mechanical stress and oxidation coexist. When a metallic species has to be introduced, a promising new development is to bombard a thin coating of the metal at an elevated temperature. Several powerful mechanisms of radiation-enhanced diffusion can bring about a complete intermixing. Examples of how this has been used to produce wear resistant surfaces in titanium are given. Finally, the equipment developed for the large scale application of the ion implantation process in the engineering field is described

A decade of advances in metallic fuel

International Nuclear Information System (INIS)

Seidel, B.R.; Batte, G.L.; Dodds, N.E.; Hofman, G.L.; Lahm, C.E.; Pahl, R.G.; Porter, D.L.; Tsai, H.; Walters, L.C.

1990-01-01

Significant advances in the understanding of behavior and performance of metallic fuels to high burnup have been achieved over the past four decades. Metallic fuels were the first fuels for liquid-metal-cooled fast reactors (LMR) but in the late 1960s worldwide interest turned toward ceramic fuels before the full potential of metallic fuel could be achieved. Now metallic fuels are recognized as a preferred viable option with regard to safety, integral fuel cycle, waste minimization and deployment economics. This paper reviews the key advances in the last decade and highlights the behavior and performance features which have demonstrated a much greater potential than previously expected. 28 refs., 2 figs., 1 tab

Small hazardous waste generators in developing countries: use of stabilization/solidification process as an economic tool for metal wastewater treatment and appropriate sludge disposal.

Science.gov (United States)

Silva, Marcos A R; Mater, Luciana; Souza-Sierra, Maria M; Corrêa, Albertina X R; Sperb, Rafael; Radetski, Claudemir M

2007-08-25

The aim of this study was to propose a profitable destination for an industrial sludge that can cover the wastewater treatment costs of small waste generators. Optimized stabilization/solidification technology was used to treat hazardous waste from an electroplating industry that is currently released untreated to the environment. The stabilized/solidified (S/S) waste product was used as a raw material to build concrete blocks, to be sold as pavement blocks or used in roadbeds and/or parking lots. The quality of the blocks containing a mixture of cement, lime, clay and waste was evaluated by means of leaching and solubility tests according to the current Brazilian waste regulations. Results showed very low metal leachability and solubility of the block constituents, indicating a low environmental impact. Concerning economic benefits from the S/S process and reuse of the resultant product, the cost of untreated heavy metal-containing sludge disposal to landfill is usually on the order of US$ 150-200 per tonne of waste, while 1tonne of concrete roadbed blocks (with 25% of S/S waste constitution) has a value of around US$ 100. The results of this work showed that the cement, clay and lime-based process of stabilization/solidification of hazardous waste sludge is sufficiently effective and economically viable to stimulate the treatment of wastewater from small industrial waste generators.

Impact of mine waste dumps on growth and biomass of economically important crops.

Science.gov (United States)

Mathiyazhagan, Narayanan; Natarajan, Devarajan

2012-11-01

The present study aimed to investigate the effect of magnesite and bauxite waste dumps on growth and biochemical parameters of some edible and economically important plants such as Vigna radiata, V. mungo, V. unguiculata, Eleusine coracana, Cajanus cajan, Pennisetum glaucum, Macrotyloma uniflorum, Oryza sativa, Sorghum bicolour, Sesamum indicum, Ricinus communis, Brassica juncea, Gossypium hirsutum and Jatropha curcas. The growth rate of all the crops was observed in the range of 75 to 100% in magnesite and 15 to 100% in bauxite mine soil. The moisture content of roots and shoots of all the crops were in the range of 24 to 77, 20 to 88% and 42 to 87, 59 to 88% respectively. The height of the crops was in the range of 2.6 to 48 cm in magnesite soil and 3 to 33 cm in bauxite soil. Thus the study shows that both mine soils reflects some physical and biomolecule impact on selected crops.

Understanding how cells allocate metals using metal sensors and metallochaperones.

Science.gov (United States)

Tottey, Stephen; Harvie, Duncan R; Robinson, Nigel J

2005-10-01

Each metalloprotein must somehow acquire the correct metal. We review the insights into metal specificity in cells provided by studies of ArsR-SmtB DNA binding, metal-responsive transcriptional repressors, and a bacterial copper chaperone. Cyanobacteria are the one bacterial group that have known enzymatic demand for cytoplasmic copper import. The copper chaperone and ATPases that supply cyanobacterial plastocyanin and cytochrome oxidase are reviewed, along with related ATPases for cobalt and zinc. These studies highlight the contributions of protein-protein interactions to metal speciation. Metal sensors and metallochaperones, along with metal transporters and metal-storage proteins, act in concert not only to supply the correct metals but also to withhold the wrong ones.

Space and economics

NARCIS (Netherlands)

Klijs, Jeroen; Heijman, Wim J.M.; Peerlings, Jack H.M.; Rouwendal, Jan; Schipper, Rob A.

2017-01-01

The subject area Regional Economics has become topical. This means that in economic analyses the production factor 'space' is of increasing importance. This study book aims to integrate space in the area of General Economics in an analytical way. Models and their applications play a major role in

Physics of amorphous metals

CERN Document Server

Kovalenko, Nikolai P; Krey, Uwe

2008-01-01

The discovery of bulk metallic glasses has led to a large increase in the industrial importance of amorphous metals, and this is expected to continue. This book is the first to describe the theoretical physics of amorphous metals, including the important theoretical development of the last 20 years.The renowned authors stress the universal aspects in their description of the phonon or magnon low-energy excitations in the amorphous metals, e.g. concerning the remarkable consequences of the properties of these excitations for the thermodynamics at low and intermediate temperatures. Tunneling

Proposed industrial recovered materials utilization targets for the metals and metal products industry

Energy Technology Data Exchange (ETDEWEB)

None

1979-05-01

Set targets for increased utilization of energy-saving recovered materials in the metals and metal products industries (ferrous, aluminium, copper, zinc, and lead) are discussed. Data preparation and methodology development and analysis of the technological and economic factors in order to prepare draft targets for the use of recovered materials are covered. Chapter 2 provides an introductory discussion of the factors that affect the recovery and reuse of secondary materials and the competition between the primary and secondary metals industries. Chapter 3 presents general profiles for the major industrial segments comprising SIC 33, including industry structure, process technology, materials and recycling flow, and future trends for the 5 industries: ferrous, aluminium, copper, zinc, and lead. Chapter 4 presents the evaluation of recycling targets for those industries. (MCW)

Odonata larvae as a bioindicator of metal contamination in aquatic environments: application to ecologically important wetlands in Iran.

Science.gov (United States)

Nasirian, Hassan; Irvine, K N

2017-09-01

The objectives of this study were twofold: (i) assess the bioaccumulation characteristics of a suite of metals associated with several different species of Odonata and (ii) examine Odonata species richness as a reflection of ecosystem health in two ecologically important wetlands of southwestern Iran, the Shadegan and Hawr Al Azim wetlands. Levels of arsenic (As), cadmium (Cd), cobalt (Co), chromium (Cr), copper (Cu), iron (Fe), mercury (Hg), manganese (Mn), lead (Pb), and zinc (Zn) were determined using inductively coupled plasma optical emission spectrometry (ICP-OES) in nine different Odonata larva species. Based on these data, biota-sediment accumulation factors (BSAFs) were calculated and generally, it was found that Cr, Cu, Mn, and Zn were being taken up by the Odonata (BSAFs >1). Because of its prevalence in the wetland and its observed ability to take up metals, it is suggested that Ischnura ramburii is an appropriate indicator of ecosystem health for these wetlands with respect to metal contamination. Odonata species richness across all sites was 49, while for the individual sites, the greatest species richness was 26 and the lowest species richness was 13. The species richness value across all sites is quite healthy, given the arid climate of the region.

Adsorption of heavy metal in freeway by asphalt block

Science.gov (United States)

Zheng, Chaocheng

2017-08-01

Heavy metals are toxic, persistent, and carcinogenic in freeway. Various techniques are available for the removal of heavy metals from waste water among soils during freeway including ion-exchange, membrane filtration, electrolysis, coagulation, flotation, and adsorption. Among them, bio-sorption processes are widely used for heavy metal and other pollutant removal due to its sustainable, rapid and economic. In this paper, heavy metal removal facilitated by adsorption in plants during freeway was illustrated to provide concise information on exploring the adsorption efficiency.

Report: the current situation of sanitary landfills in Brazil and the importance of the application of economic models

OpenAIRE

Oliveira Neto, Raúl; Otávio Petter, Carlos; Cortina Pallás, José Luís

2009-01-01

We present the development stage of the sanitary landfills in Brazil in the context of urban solid residue management, demonstrating the necessity and importance of the employment of economic models. In the article, a cost estimate model is proposed as the basis for studies to be applied by sector management, including the city council, companies, consultants and engineers, contributing to the choice of new areas, public bids, municipal consortia and private public partnerships. Peer Re...

The Economics of Minorities

Science.gov (United States)

Coles, Flournoy A., Jr.

1973-01-01

This article discusses some of the more important economic problems of minorities in the United States, identifying the economics of minorities with the economics of poverty, discrimination, exploitation, urban life, and alienation. (JM)

The study of Forest Hara Biosphere Reserve in coast of Persian Gulf and the importance of heavy metal accumulation; Case study: feathers of great cormorant

Directory of Open Access Journals (Sweden)

MIR MEHRDAD MIRSANJARI

2014-11-01

Full Text Available Mirsanjari MM, Sheybanifar F, Arjmand F. 2014. The study of forest Hara Biosphere Reserve in coast of Persian Gulf and the importance of heavy metal accumulation; Case study: feathers of great cormorant. Nusantara Bioscience 6: 159-164. In recent years, concerns about the long term effects of heavy metals as environmental polluters have arisen, since considerable quantities of heavy metals have been released into the environment as a result of extensive human activities. Heavy metal has been determined as a serious threat to the stability of ecosystems. In this study, we examined the levels of zinc‚ copper‚ lead, and cadmium in the feathers of twenty great cormorants (Phalacrocorax carbo, collected from Hara Biosphere Reserve during November and December in 2012. The results revealed that the mean concentration of heavy metals in the feathers of males is significantly higher than females (P < 0.05. In addition‚ no significant difference was observed in heavy metal concentration between juvenile and adult birds. Moreover, according to the results, the high concentration of heavy metals in some samples indicated this fact that birds are potentially exposed to the risk of heavy metals in their habitat.

Prospects for Ukrainian ferrous metals in the post-soviet period

Science.gov (United States)

Levine, R.M.; Bond, A.R.

1998-01-01

Two specialists on the mineral industries of the countries of the former USSR survey current problems confronting producers of ferrous metals in Ukraine and future prospects for domestic production and exports. A series of observations documenting the importance of ferrous metals production to Ukraine's economy is followed by sections describing investment plans and needs in the sector, and the role played by Ukraine within the iron and steel industry of the Soviet Union. The focus then turns to assessment of the current regional and global competitive position of Ukrainian producers for each of the major commodities of the sector-iron ore, manganese ore, ferroalloys, steel, and the products of the machine manufacturing and metal working industries. In conclusion, the paper discusses a potential regional industrial integration strategy analogous to that employed in the United States' Great Lakes/Midwest region, which possesses similar types of iron ore deposits and similar transport cost advantages and metallurgical and manufacturing industries. Journal of Economic Literature, Classification Numbers: F14, L61, L72. 1 table, 26 references.

Toxic metals distribution in different components of Pakistani and imported cigarettes by electrothermal atomic absorption spectrometer

International Nuclear Information System (INIS)

Kazi, T.G.; Jalbani, N.; Arain, M.B.; Jamali, M.K.; Afridi, H.I.; Sarfraz, R.A.; Shah, A.Q.

2009-01-01

It was extensively investigated that a significant flux of toxic metals, along with other toxins, reaches the lungs through smoking. In present study toxic metals (TMs) (Al, Cd, Ni and Pb) were determined in different components of Pakistani local branded and imported cigarettes, including filler tobacco (FT), filter (before and after normal smoking by a single volunteer) and ash by electrothermal atomic absorption spectrometer (ETAAS). Microwave-assisted digestion method was employed. The validity and accuracy of methodology were checked by using certified sample of Virginia tobacco leaves (ICHTJ-cta-VTL-2). The percentages (%) of TMs in different components of cigarette were calculated with respect to their total contents in FT of all branded cigarettes before smoking, while smoke concentration has been calculated by subtracting the filter and ash contents from the filler tobacco content of each branded cigarette. The highest percentage (%) of Al was observed in ash of all cigarettes, with range 97.3-99.0%, while in the case of Cd, a reverse behaviour was observed, as a range of 15.0-31.3% of total contents were left in the ash of all branded cigarettes understudy

The hydrological and economic importance of the Rhine, from its sources to its entry into the Rhenish Slate Mountains

International Nuclear Information System (INIS)

Calvis, H.

1981-01-01

Using example of Europe's most important river, investigations are carried out on the conditions and problems occurring where water- and energy economy are interacting, as well as on the different characteristics they assume in the various sections of the river. The influence of the hydroelectric power plants, the conventional thermal power plants and the nuclear power plants upon the water economy is reviewed. Moreover, the importance of these power plants within the total energy economy of the individual adjacent countries as well as the economic effects they cause to their site areas are considered. (HSCH) [de

Are acid volatile sulfides (AVS) important trace metals sinks in semi-arid mangroves?

Science.gov (United States)

Queiroz, Hermano Melo; Nóbrega, Gabriel Nuto; Otero, Xose L; Ferreira, Tiago Osório

2018-01-01

Acid-volatile sulfides (AVS) formation and its role on trace metals bioavailability were studied in semi-arid mangroves. The semi-arid climatic conditions at the studied sites, marked by low rainfall and high evapotranspiration rates, clearly limited the AVS formation (AVS contents varied from 0.10 to 2.34μmolg -1 ) by favoring oxic conditions (Eh>+350mV). The AVS contents were strongly correlated with reactive iron and organic carbon (r=0.84; r=0.83 respectively), evidencing their dominant role for AVS formation under semi-arid conditions. On the other hand, the recorded ΣSEM/AVS values remained >1 evidencing a little control of AVS over the bioavailability of trace metals and, thus, its minor role as a sink for toxic metals. Copyright © 2017 Elsevier Ltd. All rights reserved.

The importance of counting cows: Social and economic effects of a high-level nuclear waste repository in Texas

International Nuclear Information System (INIS)

Fleishman, J.; Brody, J.; Galavotti, C.

1987-01-01

Impact assessments that rely on existing records and extrapolation from broad geographic areas provide inadequate information about social and economic conditions important in siting a high-level nuclear waste repository. Texas has used an alternative approach, involving systematic surveys of representative samples of local residents, farm operators and businesses in the proposed site counties and comparison areas. Results show that this technique is useful in describing current economic conditions, including characteristics of key sectors of the economy, changes related to the siting process, and expectations that may influence investment. In addition, the surveys are useful in assessing the degree of consensus in local communities and in identifying possible differential effects of a repository on particular groups. They also provide a baseline for long-term monitoring of repository effects and contribute to their understanding of the underlying processes that shape public response to the nuclear waste program

THE IMPORTANCE OF THE BANKING FINANCIAL EDUCATION COMPONENT IN ECONOMIC PERSPECTIVE

Directory of Open Access Journals (Sweden)

Lucian-Ion MEDAR

2016-10-01

Full Text Available Economy and civil society has gone through an unprecedented financial crisis determined by an acute shortage of financial education among the large community of individuals and legal persons. Thus, the low level of economic and financial knowledge from society contributed to the amplification of economic crisis. In 2008, in the midst of financial crisis in the European Union was created Expert Group on Financial Education (EGFE, aimed at supporting a new financial education order. Breaking the vicious circle of banks debt and sovereign one, improvement of supervision European banking system, solving the financial problems of some banks through the mechanism of bank resolution, without recourse to public resources, strengthening the trust of potential customers in the financial market, in the first process of finalizing the Union European banking, can be achieved and by a new order of financial education

Importance of physical infrastructure in the economic growth of municipalities in the northern border

Directory of Open Access Journals (Sweden)

Héctor Alonso Barajas Bustillos

2012-01-01

Full Text Available This paper evaluates the importance of infrastructure on economic growth for the Mexican northern border municipalities. From the growth literature, we know that infrastructure, besides other factors, has been pointed out as a key factor in the long run perspectives of regional growth. Nevertheless, and within this thematic context, works that use a disaggregated analysis down to the level of the municipality are still scarce, which in the case of the northern border constitutes a scenario of much relevance given the development model adopted by the Mexican economy in recent decades. Empirical models results indicate that the municipalities of Piedras Negras, Nogales and Torreon maintain a positive relationship between physical infrastructure and growth. In the case of other municipalities like Tijuana, its elevated population growth inhibits a proper infrastructure allocation, although the positive effect induced by infrastructure on growth remains.

On the Beneficial Role of Silicon to Organisms : A Case Study on the Importance of Silicon Chemistry to Metal Accumulation in Yeast

NARCIS (Netherlands)

Brasser, H.J.; Krijger, G.C.; Wolterbeek, H.T.

2008-01-01

Silicon is involved in numerous important structural and functional roles in a wide range of organisms, including diatoms, plants, and humans, but clear mechanisms have been discovered only in diatoms and sponges. Silicate availability influences metal concentrations within various cell- and

Nanotoxicity: the toxicity research progress of metal and metal-containing nanoparticles.

Science.gov (United States)

Ding, Lingling; Liu, Zhidong; Aggrey, Mike Okweesi; Li, Chunhua; Chen, Jing; Tong, Ling

2015-01-01

Along with the exuberant development of nanotechnology, a large number of nanoformulations or non materials are successfully applied in the clinics, biomedicine, cosmetics and industry. Despite some unique advantages of nanoformulations, there exist potentially worrying toxic effects, particularly those related to metal and metal-containing nanoparticles (NPs). Although various researches have been conducted to assess the metallic and metal-containing nanoparticles toxic effects, only little is known about the toxicity expressive types and evaluation, reasons and mechanisms, influencing factors and research methods of metal and metal-containing nanotoxicity. Therefore, it is of importance to acquire a better understanding of metal and metal-containing nanoparticles toxicity for medical application. This review presents a summary on the metal and metal-containing nanoparticles toxicity research progress consulting relevant literature.

Economic Studies

Directory of Open Access Journals (Sweden)

A. V. Kholopov

2014-01-01

Full Text Available The establishment of the School of Economic Science at MGIMO was due to the necessity of the world economy research, and the need to prepare highly skilled specialists in international economics. The school is developing a number of areas, which reflect the Faculty structure. - Economic theory is one of the most important research areas, a kind of foundation of the School of Economic Science at MGIMO. Economic theory studies are carried out at the chair of Economic theory. "The course of economic theory" textbook was published in 1991, and later it was reprinted seven times. Over the past few years other textbooks and manuals have been published, including "Economics for Managers" by Professor S.N. Ivashkovskaya, which survived through five editions; "International Economics" - four editions and "History of Economic Thought" - three editions. - International Economic Relations are carried out by the Department of International Economic Relations and Foreign Economic Activity. Its establishment is associated with the prominent economist N.N. Lyubimov. In 1957 he with his colleagues published the first textbook on the subject which went through multiple republications. The editorial team of the textbook subsequently formed the pride of Soviet economic science - S.M. Menshikov, E.P. Pletnev, V.D. Schetinin. Since 2007, the chair of Foreign Economic Activities led by Doctor of Economics, Professor I. Platonova has been investigating the problems of improving the architecture of foreign economic network and the international competitiveness of Russia; - The history of the study of problems of the world economy at MGIMO begins in 1958 at the chair baring the same name. Since 1998, the department has been headed by Professor A. Bulatov; - The study of international monetary relations is based on the chair of International Finance, and is focused on addressing the fundamental scientific and practical problems; - The chair "Banks, monetary circulation

The Extraction of Heavy Metals by Means of a New Electrolytic Method

International Nuclear Information System (INIS)

Guiragossian, Z. G.; Martoyan, G. A.; Injeyan, S. G.; Tonikyan, S. G.; Nalbandyan, G. G.

2003-01-01

The extraction of metals in known metallurgical methods is pursued on the basis of separating as much as possible the desired metal's content from the ore concentrate, in the most economical manner. When these principles are also applied to the extraction of heavy metals, the related environmental factors do not readily meet with requirements. Today, an acceptable extraction technology for metals must satisfy the need to produce the deep separation of metals from their source in both economical and environmentally safe manner. This pertains to the direction of our ongoing research and development, among others in the field of environmental remediation. Earlier, we successfully addressed in an environmentally safe manner the selective extraction of radioactive isotopes from liquid radioactive wastes, produced at Armenia's Metzamor Nuclear Power Plant and implemented a functioning LRW station at the NPP. Currently, we extended our new electrodialysis-based electrolytic method in a laboratory scale, for the extraction and deep separation of different metals, including the heavy metals. Our new method, its efficiency, economy and full compliance with environmental issues will be presented

Titanium metal: extraction to application

Energy Technology Data Exchange (ETDEWEB)

Gambogi, Joseph (USGS, Reston, VA); Gerdemann, Stephen J.

2002-09-01

In 1998, approximately 57,000 tons of titanium metal was consumed in the form of mill products (1). Only about 5% of the 4 million tons of titanium minerals consumed each year is used to produce titanium metal, with the remainder primarily used to produce titanium dioxide pigment. Titanium metal production is primarily based on the direct chlorination of rutile to produce titanium tetrachloride, which is then reduced to metal using the Kroll magnesium reduction process. The use of titanium is tied to its high strength-to-weight ratio and corrosion resistance. Aerospace is the largest application for titanium. In this paper, we discuss all aspects of the titanium industry from ore deposits through extraction to present and future applications. The methods of both primary (mining of ore, extraction, and purification) and secondary (forming and machining) operations will be analyzed. The chemical and physical properties of titanium metal will be briefly examined. Present and future applications for titanium will be discussed. Finally, the economics of titanium metal production also are analyzed as well as the advantages and disadvantages of various alternative extraction methods.

Durability of metals from archaeological objects, metal meteorites, and native metals

International Nuclear Information System (INIS)

Johnson, A.B. Jr.; Francis, B.

1980-01-01

Metal durability is an important consideration in the multi-barrier nuclear waste storage concept. This study summarizes the ancient metals, the environments, and factors which appear to have contributed to metal longevity. Archaeological and radiochemical dating suggest that human use of metals began in the period 6000 to 7000 BC. Gold is clearly the most durable, but many objects fashioned from silver, copper, bronze, iron, lead, and tin have survived for several thousand years. Dry environments, such as tombs, appear to be optimum for metal preservation, but some metals have survived in shipwrecks for over a thousand years. The metal meteorites are Fe-base alloys with 5 to 60 wt% Ni and minor amounts of Co, I, and S. Some meteoritic masses with ages estimated to be 5,000 to 20,000 years have weathered very little, while other masses from the same meteorites are in advanced stages of weathering. Native metals are natural metallic ores. Approximately five million tonnes were mined from native copper deposits in Michigan. Copper masses from the Michigan deposits were transported by the Pleistocene glaciers. Areas on the copper surfaces which appear to represent glacial abrasion show minimal corrosion. Dry cooling tower technology has demonstrated that in pollution-free moist environments, metals fare better at temperatures above than below the dewpoint. Thus, in moderate temperature regimes, elevated temperatures may be useful rather than detrimental for exposures of metal to air. In liquid environments, relatively complex radiolysis reactions can occur, particularly where multiple species are present. A dry environment largely obviates radiolysis effects

Durability of metals from archaeological objects, metal meteorites, and native metals

Energy Technology Data Exchange (ETDEWEB)

Johnson, A.B. Jr.; Francis, B.

1980-01-01

Metal durability is an important consideration in the multi-barrier nuclear waste storage concept. This study summarizes the ancient metals, the environments, and factors which appear to have contributed to metal longevity. Archaeological and radiochemical dating suggest that human use of metals began in the period 6000 to 7000 BC. Gold is clearly the most durable, but many objects fashioned from silver, copper, bronze, iron, lead, and tin have survived for several thousand years. Dry environments, such as tombs, appear to be optimum for metal preservation, but some metals have survived in shipwrecks for over a thousand years. The metal meteorites are Fe-base alloys with 5 to 60 wt% Ni and minor amounts of Co, I, and S. Some meteoritic masses with ages estimated to be 5,000 to 20,000 years have weathered very little, while other masses from the same meteorites are in advanced stages of weathering. Native metals are natural metallic ores. Approximately five million tonnes were mined from native copper deposits in Michigan. Copper masses from the Michigan deposits were transported by the Pleistocene glaciers. Areas on the copper surfaces which appear to represent glacial abrasion show minimal corrosion. Dry cooling tower technology has demonstrated that in pollution-free moist environments, metals fare better at temperatures above than below the dewpoint. Thus, in moderate temperature regimes, elevated temperatures may be useful rather than detrimental for exposures of metal to air. In liquid environments, relatively complex radiolysis reactions can occur, particularly where multiple species are present. A dry environment largely obviates radiolysis effects.

Development of Experimental Setup of Metal Rapid Prototyping Machine using Selective Laser Sintering Technique

Science.gov (United States)

Patil, S. N.; Mulay, A. V.; Ahuja, B. B.

2018-04-01

Unlike in the traditional manufacturing processes, additive manufacturing as rapid prototyping, allows designers to produce parts that were previously considered too complex to make economically. The shift is taking place from plastic prototype to fully functional metallic parts by direct deposition of metallic powders as produced parts can be directly used for desired purpose. This work is directed towards the development of experimental setup of metal rapid prototyping machine using selective laser sintering and studies the various parameters, which plays important role in the metal rapid prototyping using SLS technique. The machine structure in mainly divided into three main categories namely, (1) Z-movement of bed and table, (2) X-Y movement arrangement for LASER movements and (3) feeder mechanism. Z-movement of bed is controlled by using lead screw, bevel gear pair and stepper motor, which will maintain the accuracy of layer thickness. X-Y movements are controlled using timing belt and stepper motors for precise movements of LASER source. Feeder mechanism is then developed to control uniformity of layer thickness metal powder. Simultaneously, the study is carried out for selection of material. Various types of metal powders can be used for metal RP as Single metal powder, mixture of two metals powder, and combination of metal and polymer powder. Conclusion leads to use of mixture of two metals powder to minimize the problems such as, balling effect and porosity. Developed System can be validated by conducting various experiments on manufactured part to check mechanical and metallurgical properties. After studying the results of these experiments, various process parameters as LASER properties (as power, speed etc.), and material properties (as grain size and structure etc.) will be optimized. This work is mainly focused on the design and development of cost effective experimental setup of metal rapid prototyping using SLS technique which will gives the feel of

Bees as Bioindicators of Environmental Pollution with Metals in an Urban Area

Directory of Open Access Journals (Sweden)

Mirosław Skorbiłowicz

2018-05-01

Full Text Available The commonness of metal contamination, even at considerable distances from industrial centers and intensively used economic areas, has become the interest of many researchers. The issue of evaluating the state of the environment with the help of living organisms has become a very important part in the control of the natural environment. Honey bee (Apis mellifera L is a good bioindicator as it is inextricably linked to the natural environment in which it lives. The aim of the research, and at the same time the main assumption of the study, was to evaluate the effectiveness of honeybees (Apis mellifera L as bioindicators for the presence of Cu, Cr, Zn, Mn, Fe in the urban area (example of Bialystok city. The study includes pilot studies covering three sampling periods (March, June and September 2015. Analyses of metals were made by ASA method. The results showed the presence of Cu, Cr Zn, Mn and Fe in all bees samples. An increased content of Cr in bees was also found, which may be the result of the presence of this element in the environment (air, soil, water, plants, pollen and in the impregnation agent applied to protect wooden elements of the bee hive. The research showed seasonal variation of metals in bees bodies. The main sources of studied metals in bee samples seem to be motorization, industry, and municipal economy within the urban area. Statistical calculations showed a common origin of majority of studied metals. Bee studies for metals contents can be an important element of a bio-monitoring of changing natural environment as a consequence of anthropogenic activity.

Advances in metal forming expert system for metal forming

CERN Document Server

Hingole, Rahulkumar Shivajirao

2015-01-01

This comprehensive book offers a clear account of the theory and applications of advanced metal forming. It provides a detailed discussion of specific forming processes, such as deep drawing, rolling, bending extrusion and stamping. The author highlights recent developments of metal forming technologies and explains sound, new and powerful expert system techniques for solving advanced engineering problems in metal forming. In addition, the basics of expert systems, their importance and applications to metal forming processes, computer-aided analysis of metalworking processes, formability analysis, mathematical modeling and case studies of individual processes are presented.

Establishing the importance of human health risk assessment for metals and metalloids in urban environments.

Science.gov (United States)

Peña-Fernández, A; González-Muñoz, M J; Lobo-Bedmar, M C

2014-11-01

Rapid development, industrialisation, and urbanisation have resulted in serious contamination of soil by metals and metalloids from anthropogenic sources in many areas of the world, either directly or indirectly. Exponential urban and economic development has resulted in human populations settling in urban areas and as a result being exposed to these pollutants. Depending on the nature of the contaminant, contaminated urban soils can have a deleterious effect on the health of exposed populations and may require decontamination, recovery, remediation and restoration. Therefore, human health risk assessments in urban environments are very important. In the case of Spain, there are few studies regarding risk assessment of trace elements in urban soils, and those that exist have been derived mainly from areas potentially exposed to industrial contamination or in the vicinity of point pollution. The present study analysed Al, As, Be, Cd, Cr, Cu, Hg, Mn, Ni, Pb, Sn, Ti, Tl, V and Zn soil concentrations in and around the city of Alcalá de Henares (35 km NE of Madrid). Soil samples were collected in public parks and recreation areas within the city and in an industrial area on the periphery of the city. From these results, an assessment of the health risk for the population was performed following the methodology described by the US EPA (1989). In general, it was observed that there could be a potential increased risk of developing cancer over a lifetime from exposure to arsenic (As) through ingestion of the soils studied (oral intake), as well as an increased risk of cancer due to inhalation of chromium (Cr) present in re-suspended soils from the industrial area. Our group has previously reported (Granero and Domingo, 2002; Peña-Fernández et al., 2003) that there was an increased risk of developing cancer following exposure to As in the same soils in a previous study. Therefore, it is necessary to reduce the levels of contaminants in these soils, especially As and Cr

Phytoremediation of metals contaminated dredged sediments: Use of synthetic chelates in metals phytoextraction

Science.gov (United States)

Sahut, C.; Geniaut, G.; Lillo, M. P.

2003-05-01

(in Times 10 points) The waterways maintenance leads to a large volume of dredged polluted sediments, to be disposed of, every year. As the economic disposal of dredged sediment is a single line along the stream they can behave as a sink of pollutant and a migration in the environment is observed. Chelate-enhanced phytoremediation has been proposed as an effective tool for the extraction of heavy metals from dredged sediment by plants. Lysimeters studies were conducted to study the phytoremediation of sediments with EDTA and lactic acid used as synthetic chelators. EDTA appeared to enhance metal solubility by plant uptake did not increase accordingly. Futhermore EDTA enhance metal leaching which could lead 10 groungwater pollution. To prevent these unwanted side-effects, careful management of phytoremediation and of the use of EDTA seems necessary.

A Study of the Relative Importance of Communication and Economic Variables in Diffusion: Dwarf Wheats on Unirrigated Small Holdings in Pakistan.

Science.gov (United States)

Rochin, Refugio I.

The purpose of this paper is twofold: (1) it presents some empirical findings of the relative importance of both "economic" and "communication" variables in the diffusion of an innovation (dwarf wheats) in an unirrigated region of Pakistan which is densely populated by smallholders. The sample of farmers reported are…

Arms and technology transfers: Security and economic considerations among importing and exporting states

International Nuclear Information System (INIS)

Lodgaard, S.; Pfaltzgraff, R.L. Jr.

1995-01-01

The issues of technology and armament transfers are increasingly at the forefront of problems of international security and disarmament. Three major reasons could explain this. First, the disarmament process has been very successful in the last few years, especially in the field of nuclear, as well chemical and conventional, weapons. Second the disarmament effort underway concerns primarily the old partners of the East-West confrontation. Last, the general context, characterized by the opening and widening of exchanges, the increasingly open and transparent circulation of techniques and material, and the globalization of economic relations, must be taken into account. This report, prepared by UNIDIR comprises the following subjects: General trends in defense related transfers; Political/military factors associated with the diffusion of advanced technology; economic and technological consideration; and facilitation of economic growth/maximization of regional security and stability

Recycling of rare metals from the decommissioning of nuclear facilities

International Nuclear Information System (INIS)

Charlier, Frank; Dabruck, Jan Philipp

2014-01-01

The German Government decided in 2011 to phase out nuclear power. Thus, 17 power reactors will be shut down within the next 11 years and to be decommissioned. An interesting question is, in which extent rare metals of strategic economic importance can be recycled within the scope of decommissioning. To be named are valuable bulk metals like copper, aluminium and lead, but also rare metals like indium, niobium, vanadium, cobalt, or tin and rare earth metals. Due to high requirements in terms of material technology, materials found in nuclear reactor components are of particular importance when it comes to recycling. These include components of the primary cooling system (RPV-internals, control rods and grid-structures) components for process control systems and components from the non-nuclear part of reactors (pumps, valves, heat exchangers or boilers). Especially the radiologically controlled melt-down of metals is used as an alternative to free release or disposal. This process has some serious disadvantages, thus it seems to be appropriate optimizing the decommissioning process regarding recycling of valuable metals. The work schedule for pre-investigation is outlined for 18 months and can be summarized as follows: - Requesting design, operational and material data, - Data from a sample facility: detailed specification of used components, substances contained and data from related activation calculations, fluence-values and contamination, - Setting up a database to assign non-ferrous metals and components with additional data like activation and decay time possibly needed, concentration, distribution, total mass, aggregate state, state of chemical bonding and recyclability, - Determining the activation distribution to evaluate if a components is recyclable at all, thus: preparation of an MCNP-model, simulation of n-fluence and application of variance-reduction methods to optimize activation calculations, - Classification of recyclability considering the following

Experienţa parcursului economic de vecinătate - securitatea economică a României

Directory of Open Access Journals (Sweden)

Viorica ŢURCANU

2016-06-01

Full Text Available The importance of the subject of national economic security is one of the main problems facing most national economies. At present, the process of globalization which included full and multi-criteria most countries, is one of the important conditions of development, including economically. Thus, economic development and security (national, regional or international is the major landmarks in manifesting major global changes and those within each country and, therefore, of every citizen. In these circumstances, a strong, powerful and, not least, competitive, stable in terms of macro-economic and exchange in terms of the tempo of development and adaptation to new conditions of exchange, represents an important basis for creating a policy security truly secure. Given the apparent importance of the subject of specific system in which we live today, the economic situation and the policy of the West European countries.

Recognition of the importance of geogenic sources in the content of metals in PM2.5 collected in the Mexico City Metropolitan Area.

Science.gov (United States)

Morton-Bermea, Ofelia; Garza-Galindo, Rodrigo; Hernández-Álvarez, Elizabeth; Amador-Muñoz, Omar; Garcia-Arreola, Maria Elena; Ordoñez-Godínez, Sara L; Beramendi-Orosco, Laura; Santos-Medina, Graciela L; Miranda, Javier; Rosas-Pérez, Irma

2018-01-17

The study of airborne metals in urban areas is relevant due to their toxic effects on human health and organisms. In this study, we analyzed metals including rare earth elements (REE) in particles smaller than 2.5 μm (PM 2.5 ), collected at five sites around the Mexico City Metropolitan Area (MCMA), during three periods in 2011: April (dry-warm season, DW), August (rainy season, R), and November (dry-cold season, DC). Principal component analysis allowed identifying factors related to geogenic sources and factors related to anthropogenic sources. The recognition of the high impact of geogenic sources in PM 2.5 is in agreement with the REE distribution patterns, which show similar behavior as those shown by igneous rocks, confirming the influence of the regional geogenic material. Metals associated to geogenic sources showed higher concentration (p  0.05) and no similar seasonal pattern among them. These unexpected results exposed outstanding information regarding the identification of different geogenic sources as the main contributors of metals in the atmospheric environment in the MCMA and highlighted the importance of meteorology in the spatial and seasonal metal patterns.

Trade in the telecoupling framework: evidence from the metals industry

Directory of Open Access Journals (Sweden)

Hang Xiong

2018-03-01

Full Text Available As a conceptual framework for understanding contemporary sustainability challenges, telecoupling emphasizes the importance of socioeconomic and environmental interactions over long distances. These long-distance interactions can occur through multiple human activities. We focus on international trade, a major channel of telecoupling flows, and in particular on the international trade of metals. We use the data of physical products and embedded greenhouse gas (GHG emissions trade in the World Input-Output Database (WIOD to quantitatively examine how countries contribute to both economic and environmental flows through the trade of metals, but also how that contribution varies depending on their position in the global value chain (GVC of contemporary international trade. This analysis is built on previously developed techniques for decomposing gross exports of products, which we apply to examine embedded GHG emissions. We make comparisons between countries' contributions to flows of economic value versus embedded GHG emissions, but also examine contributions beyond total volumes of trade and bilateral trade. Specifically, we quantify the economic and environmental spillover effects that occur in contemporary international trade because of the GVC in which flows of intermediate goods form components in other subsequently traded goods. We interpret differences between countries' contributions to the flows of economic value versus embedded GHG emissions as being related to the intensity and efficiency of resource use during production. In turn, differences in contributions to direct trade flows versus spillover flows are related to their positions in the GVC. Subsequently, we discuss other elements of the telecoupling framework in trade, i.e., agents, causes, and effects. Quantitatively incorporating these telecoupling framework elements alongside spillover flows will enable investigation of dynamics and relationships that traditional trade theories

The Alchemist’s Approach to Metal Poisoning: Transforming the Metal Burden

Directory of Open Access Journals (Sweden)

Wayne Briner

2014-06-01

Full Text Available Metal poisoning is a global problem with humans being exposed to a wide range of metals in varying doses and varying time frames. Traditionally, treatment involves removal of the toxic source or chelation therapy. An intermediate approach is needed. This review outlines the argument for the use of essential metal supplementation as a strategy to induce metallothionein expression and displace the toxic metal from important biological systems, improving the metal burden of the patient. Specific recommendations are given for supplementation with calcium, zinc and vitamin E as a broad strategy to improve the status of those exposed to toxic metals.

Judaism and Economics: The Link between Judaism and Economic Life

Directory of Open Access Journals (Sweden)

Stanisław Fel

2014-09-01

Full Text Available This article deals with the relationship of Judaism to economic activity. The subject is the typical approach of Jewish ethical thought, concerning the understanding of money, wealth, jobs and economic initiatives. Issues related to fundamental economic life are shown to be covered in the books that the Jewish community considers sacred. Particularly important are the Old Testament and the Talmud. Also important are references to the cultural interpretation of Judaism, including the classical works on the subject – Jacques Attali and Werner Sombart. The key concept is the subject of “wealth,” the meaning of which is derived from the Bible’s Book of Exodus and the Talmud. Finally, the foundations for Jewish economic thought can be expressed as the product of an embedded culture, which is founded on religion, in which property acquires ethical legitimacy. The argument is crowned with historical examples of the noble economic activity of the Jewish people, which also give evidence of the interrelatedness of religion and the proper use of wealth.

Crystallochemistry of rhenium compounds with metal-metal bonds

International Nuclear Information System (INIS)

Koz'min, P.A.; Surazhskaya, M.D.

1980-01-01

A review is presented including a brief description of atomic structure of 59 coordination rhenium compounds with metal-metal bond. The most important bond lengths and valent angles are presented for each compound. The dependence of rhenium-rhenium bond length on its multiplicity is discussed and possible causes of deviations from this dependence (namely, axial ligand presence, steric repulsion of ligands) are considered. On the basis of qualitative comparison of electronegativity of ligands in dimer compounds with quarternary bond of rhenium-rhenium a supposition is made on the influence of formal charge of atomic group and summary electro-negativity of ligands on the possibility of the metal-metal bond formation

Hospital-physician relations: the relative importance of economic, relational and professional attributes to organizational attractiveness

Science.gov (United States)

2014-01-01

Background Belgian hospitals face a growing shortage of physicians and increasingly competitive market conditions. In this challenging environment hospitals are struggling to build effective hospital-physician relationships which are considered to be a critical determinant of organizational success. Methods Employed physicians of a University hospital were surveyed. Organizational attributes were identified through the literature and two focus groups. Variables were measured using validated questionnaires. Descriptive analyses and linear regression were used to test the model and relative importance analyses were performed. Results The selected attributes predict hospital attractiveness significantly (79.3%). The relative importance analysis revealed that hospital attractiveness is most strongly predicted by professional attributes (35.3%) and relational attributes (29.7%). In particular, professional development opportunities (18.8%), hospital prestige (16.5%), organizational support (17.2%) and leader support (9.3%) were found to be most important. Besides these non-economic aspects, the employed physicians indicated pay and financial benefits (7.4%) as a significant predictor of hospital attractiveness. Work-life balance and job security were not significantly related to hospital attractiveness. Conclusions This study shows that initiatives aimed at strengthening physicians’ positive perceptions of professional and relational aspects of practicing medicine in hospitals, while assuring satisfactory financial conditions, may offer useful avenues for increasing the level of perceived hospital attractiveness. Overall, hospitals are advised to use a differentiated approach to increase their attractiveness to physicians. PMID:24884491

Hospital-physician relations: the relative importance of economic, relational and professional attributes to organizational attractiveness.

Science.gov (United States)

Trybou, Jeroen; Gemmel, Paul; Van Vaerenbergh, Yves; Annemans, Lieven

2014-05-21

Belgian hospitals face a growing shortage of physicians and increasingly competitive market conditions. In this challenging environment hospitals are struggling to build effective hospital-physician relationships which are considered to be a critical determinant of organizational success. Employed physicians of a University hospital were surveyed. Organizational attributes were identified through the literature and two focus groups. Variables were measured using validated questionnaires. Descriptive analyses and linear regression were used to test the model and relative importance analyses were performed. The selected attributes predict hospital attractiveness significantly (79.3%). The relative importance analysis revealed that hospital attractiveness is most strongly predicted by professional attributes (35.3%) and relational attributes (29.7%). In particular, professional development opportunities (18.8%), hospital prestige (16.5%), organizational support (17.2%) and leader support (9.3%) were found to be most important. Besides these non-economic aspects, the employed physicians indicated pay and financial benefits (7.4%) as a significant predictor of hospital attractiveness. Work-life balance and job security were not significantly related to hospital attractiveness. This study shows that initiatives aimed at strengthening physicians' positive perceptions of professional and relational aspects of practicing medicine in hospitals, while assuring satisfactory financial conditions, may offer useful avenues for increasing the level of perceived hospital attractiveness. Overall, hospitals are advised to use a differentiated approach to increase their attractiveness to physicians.

Heavy metal jako subkultura

OpenAIRE

KOUTNÁ, Daniela

2016-01-01

This bachelor thesis deals with heavy metal subculture. Its aim is to introduce the most important branches and to show broadness of heavy metal. This bachelor thesis describes development and history, briefly shows Czech heavy metal history alongside with the biggest and most popular Czech heavy metal festivals. It shows the most dressing concerns of society against this style.

Local knowledge of traditional fishermen on economically important crabs (Decapoda: Brachyura) in the city of Conde, Bahia State, Northeastern Brazil.

Science.gov (United States)

de Magalhães, Henrique Fernandes; Costa Neto, Eraldo Medeiros; Schiavetti, Alexandre

2012-07-02

This article records the traditional knowledge of crab gatherers in the city of Conde, in the North Coast Region of Bahia State, Northeastern Brazil. Data on biological and ecological aspects of economically important brachyuran crustaceans have been obtained from semi-structured interviews and in loco observations conducted from September 2007 to December 2009. A total of 57 fishermen of both genders, aged between 10 and 78 years have been interviewed (individually or collectively) in different contexts; interviewees were asked about aspects such as external morphology, life cycle, trophic ecology, and spatial and temporal distribution of the major economically important brachyuran crustaceans in the region. Seven fishing communities were visited: Siribinha, Sítio do Conde, Poças, Ilha das Ostras, Cobó, Buri and Sempre Viva. Data were analyzed by comparing the information provided by participants with those from the specialized academic literature. The results show that artisanal fishermen have a wide ranging and well-grounded knowledge on the ecological and biological aspects of crustaceans. Crab gatherers of Conde know about growth and reproductive behavior of the animals they interact with, especially with regard to the three major biological aspects: "molt", "walking dance" and "spawning". This knowledge constitutes an important source of information that should be considered in studies of management and sustainable use of fishery resources in the North Coast Region of Bahia State.

ALMR deployment economic analysis

International Nuclear Information System (INIS)

Delene, J.G.; Fuller, L.C.; Hudson, C.R.

1993-06-01

This analysis seeks to model and evaluate the economics of the use of Advanced Liquid Metal Reactors (ALMR) as a component of this country's future electricity generation mix. The ALMR concept has the ability to utilize as fuel the fissile material contained in previously irradiated nuclear fuel (i.e., spent fuel). While not a requirement for the successful deployment of ALMR power plant technology, the reprocessing of spent fuel from light water reactors (LWR) is necessary for any rapid introduction of ALMR power plants. In addition, the reprocessing of LWR spent fuel may reduce the number of high level waste repositories needed in the future by burning the long-lived actinides produced in the fission process. With this study, the relative economics of a number of potential scenarios related to these issues are evaluated. While not encompassing the full range of all possibilities, the cases reported here provide an indication of the potential costs, timings, and relative economic attractiveness of ALMR deployment

Uranium metal production by molten salt electrolysis

International Nuclear Information System (INIS)

Takasawa, Yutaka

1999-01-01

Atomic vapor laser isotope separation (AVLIS) is a promising uranium enrichment technology in the next generation. Electrolytic reduction of uranium oxides into uranium metal is proposed for the preparation of uranium metal as a feed material for AVLIS plant. Considering economical performance, continuos process concept and minimizing the amount of radioactive waste, an electrolytic process for producing uranium metal directly from uranium oxides will offer potential advantages over the existing commercial process. Studies of uranium metal by electrolysis in fluoride salts (BaF 2 -LiF-UF 4 (74-11-15 w/o) at 1150-1200degC, using both a laboratory scale apparatus and an engineering scale one, and continuous casting of uranium metal were carried out in order to decide the optimum operating conditions and the design of the industrial electrolytic cells. (author)

Studies on selected organic-metal interactions of importance in the environment

International Nuclear Information System (INIS)

Mason, Ian.

1995-10-01

This research project investigated the interaction between natural organics acids and selected metal ions. The aims of the project was to provide quantitative data on the speciation of metal ions when placed in systems containing natural organic acids. It was envisaged that such data will assist in the risk assessment of the Drigg low level waste site in Cumbria. The formation and complexing ability of these natural organic acids is discussed and the classing of these acids into high molecular weight organic acids and low molecular weight organic acids. Initial investigations used a potentiometric technique to study the interaction between nickel and europium and selected low molecular weight organic acids which were thought to occur in significant concentrations in soils and groundwaters. These experiments confirmed existing critically assessed literature values, and provided an experimental methodology for further 'in-house' measurement of such values. In addition, studies were also performed on systems containing two competing organic acids. (author)

Asymmetric designed sintered metal filter elements in the HTF process of LILW vitrification plant

International Nuclear Information System (INIS)

Roehlig, Rainer

2005-01-01

Sintered metal filter elements have been used for years and have been successfully in operation in different application. The technical and economical advantages of only recently developed asymmetric Metallic Membranes elements, which operate as a surface filter, will be shown in comparison with standard sintered metal filter cartridges. The permeability, particle retention and back flushing performance have been improved. In order to achieve this, an asymmetric structure was designed in which an active filtration layer is applied onto a coarse porous metal support material made out of the same alloy. The economical benefits for customers are low maintenance and reduced investment cost as well as defined particle retention as is required by the users

The computer-aided design of rubber-metal products

Directory of Open Access Journals (Sweden)

Pavlo S. Shvets

2015-12-01

Full Text Available The important problem in design of rubber-metal products is the optimization of their mass without sacrificing of proportionality factor is in the limits of standard. Aim: The aim of this work is to improve the computer-aided systems by development and implementation of improved optimization method in rubber-metal CAD systems for designers based on the reverse optimization. Materials and Methods: The paper studies the matters of computer-aided structural design of technical composite products composed of anisotropic materials that are essentially different in properties. Results: The structure of CAD systems for designers solving the problems of such design is offered and the work principles of its subsystems are described. It is shown that complicated systems optimization in CAD systems must consider as restrictions the entitative connection between separate elements of these systems within the area of the optimizing arguments. Conclusions: The problem of the “reverse” optimization when objective functions are the connectivity area parameters is considered. In many cases, this allows receiving solutions that are more effective during the computer-aided design process. The developed CAD system for designers was used during the production of rubber-metal shock absorbers at the Odessa Rubber Technical Articles Plant. The positive technical and economic effect was obtained.

The Importance of Economic Perspective and Quantitative Approaches in Oncology Value Frameworks of Drug Selection and Shared Decision Making.

Science.gov (United States)

Waldeck, A Reginald; Botteman, Marc F; White, Richard E; van Hout, Ben A

2017-06-01

The debate around value in oncology drug selection has been prominent in recent years, and several professional bodies have furthered this debate by advocating for so-called value frameworks. Herein, we provide a viewpoint on these value frameworks, emphasizing the need to consider 4 key aspects: (1) the economic underpinnings of value; (2) the importance of the perspective adopted in the valuation; (3) the importance of the difference between absolute and relative measures of risk and measuring patient preferences; and (4) the recognition of multiple quality-of-life (QoL) domains, and the aggregation and valuation of those domains, through utilities within a multicriteria decision analysis, may allow prioritization of QoL above the tallying of safety events, particularly in a value framework focusing on the individual patient. While several frameworks exist, they incorporate different attributes and-importantly-assess value from alternative perspectives, including those of patients, regulators, payers, and society. The various perspectives necessarily lead to potentially different, if not sometimes divergent, conclusions about the valuation. We show that the perspective of the valuation affects the framing of the risk/benefit question and the methodology to measure the individual patient choice, or preference, as opposed to the collective, or population, choice. We focus specifically on the American Society of Clinical Oncology (ASCO) Value Framework. We argue that its laudable intent to assist in shared clinician-patient decision making can be augmented by more formally adopting methodology underpinned by micro- and health economic concepts, as well as application of formal quantitative approaches. Our recommendations for value frameworks focusing on the individual patient, such as the ASCO Value Framework, are 3-fold: (1) ensure that stakeholders understand the importance of the adopted (economic) perspective; (2) consider using exclusively absolute measures of

The industry of metallic rare earths (R.E.)

International Nuclear Information System (INIS)

Poirier, P.

1979-01-01

The following subjects are discussed: rare earths resources (rare earths abondance and world reserves, main ores). Rare earths separation and purification (ionic exchange, solvent extraction). Metallic rare earths and their mixtures, metallothermic reduction of oxides or fluorides (Ca, Mg, Al, Si or rare earth metals), Co-reduction process for intermetallic compounds (SmCo 5 ). Industrial applications of metallic rare earths (traditional applications such as flints, nodular cast iron, steel refining, magnesium industrie, applications under development such as rare earths/cobalt magnets, LaNi 5 for hydrogen storage, special alloys (automotive post combustion), magnetostrictive alloys). Economical problems: rare earth are elements relatively abundant and often at easily accessible prices. However, this group of 15 elements are liable to certain economical restraints. It is difficult to crack ore for only one rare earth. Availability of one given rare earth must be associated with the other corresponding rare earths to absorb all the other rare earths in other applications. Rare-earth industry has a strong expanding rate. 20% per year average for 6 years with Rhone-Poulenc. Thanks to their exceptional, specific characteristics rare earths have a bright future particularly for their metals

Important facts on Canada's natural resources (as of November 2004)

International Nuclear Information System (INIS)

2004-01-01

This brochure presents a statistical account of Canada's natural resources sector, including the forest sector, mineral and mining sector, and energy producing sector. Canada's natural resources sectors and allied industries have contributed significantly to the country's economic growth and job creation for several decades. This brochure includes facts for 2003 and information on gross domestic products, direct employment, new capital investment, trade, imports, and balance of trade for each of the 3 sectors. The national economic importance of each sector was also outlined. In 2003, the forest sector contributed $33.7 billion to the Canadian economy (3 per cent of the national gross domestic product). Forest products were a major contributor to Canada's surplus balance of trade in 2003, with major commodities being softwood lumber, newsprint and wood pulp. Canada is also among the largest mining nations in the world, producing more than 60 minerals and metals. In 2003, the value of production from Canadian mining, mineral-processing and metal producing industries was about $50 billion (4 per cent of the national gross domestic product). The brochure includes a table that ranks 2003 world production and exports of uranium, nickel, zinc, gold, copper, potash, asbestos, gypsum and salt. Approximately 80 per cent of Canada's mineral production is exported. The brochure also presents data on the remaining established reserves in 2002 for natural gas (59.8 trillion cubic feet), crude oil (179.1 billion barrels), and primary energy production by commodity. These were 41.5 per cent gas, 32.9 per cent petroleum, 9.5 per cent electricity, 9.0 per cent coal, and 4.0 per cent wood waste. Alberta accounted for 63 per cent of total energy production, followed by British Columbia at 13 per cent, Saskatchewan at 9 per cent, Quebec at 4 per cent, and Ontario at 2 per cent. The international importance of geomatics and geoscience in Canada was also highlighted. This sector

ECONOMIC GROWTH AND EQUALITY IN REDUCING POVERTY

Directory of Open Access Journals (Sweden)

Zaenal Muttaqin

2016-02-01

Full Text Available In some developing countries, the instrument to alleviate the poverty is by using the economic growth. So, the increasing in investment, infrastructure development, and macroeconomics stability always be priority from developing countries. In this article explain that economic growth is not the important factor to alleviate the poverty, because equality sometimes is more important rather than the economic growth. In this context, its measure by inequality growth trade off index (IGTI. This method is to measure the influence of economic growth to reducing the inequality, with this method every country can measure which one is better to reducing the poverty whether the economic growth or equality. With this method, Laos in 2000 show that economic growth is more important than equality, but in the same year in Thailand show that equality is more important than economic growth.DOI: 10.15408/sjie.v1i1.2592

The importance of socio-economic context for social marketing models for improving reproductive health: Evidence from 555 years of program experience

Directory of Open Access Journals (Sweden)

Rahaim Stephen

2005-01-01

Full Text Available Abstract Background Over the past two decades, social marketing programs have become an important element of the national family planning and HIV prevention strategy in several developing countries. As yet, there has not been any comprehensive empirical assessment to determine which of several social marketing models is most effective for a given socio-economic context. Such an assessment is urgently needed to inform the design of future social marketing programs, and to avoid that programs are designed using an ineffective model. Methods This study addresses this issue using a database of annual statistics about reproductive health oriented social marketing programs in over 70 countries. In total, the database covers 555 years of program experience with social marketing programs that distribute and promote the use of oral contraceptives and condoms. Specifically, our analysis assesses to what extent the model used by different reproductive health social marketing programs has varied across different socio-economic contexts. We then use random effects regression to test in which socio-economic context each of the models is most successful at increasing use of socially marketed oral contraceptives and condoms. Results The results show that there has been a tendency to design reproductive health social marketing program with a management structure that matches the local context. However, the evidence also shows that this has not always been the case. While socio-economic context clearly influences the effectiveness of some of the social marketing models, program maturity and the size of the target population appear equally important. Conclusions To maximize the effectiveness of future social marketing programs, it is essential that more effort is devoted to ensuring that such programs are designed using the model or approach that is most suitable for the local context.

The importance of socio-economic context for social marketing models for improving reproductive health: evidence from 555 years of program experience.

Science.gov (United States)

Meekers, Dominique; Rahaim, Stephen

2005-01-27

Over the past two decades, social marketing programs have become an important element of the national family planning and HIV prevention strategy in several developing countries. As yet, there has not been any comprehensive empirical assessment to determine which of several social marketing models is most effective for a given socio-economic context. Such an assessment is urgently needed to inform the design of future social marketing programs, and to avoid that programs are designed using an ineffective model. This study addresses this issue using a database of annual statistics about reproductive health oriented social marketing programs in over 70 countries. In total, the database covers 555 years of program experience with social marketing programs that distribute and promote the use of oral contraceptives and condoms. Specifically, our analysis assesses to what extent the model used by different reproductive health social marketing programs has varied across different socio-economic contexts. We then use random effects regression to test in which socio-economic context each of the models is most successful at increasing use of socially marketed oral contraceptives and condoms. The results show that there has been a tendency to design reproductive health social marketing program with a management structure that matches the local context. However, the evidence also shows that this has not always been the case. While socio-economic context clearly influences the effectiveness of some of the social marketing models, program maturity and the size of the target population appear equally important. To maximize the effectiveness of future social marketing programs, it is essential that more effort is devoted to ensuring that such programs are designed using the model or approach that is most suitable for the local context.

Scenarios for Demand Growth of Metals in Electricity Generation Technologies, Cars, and Electronic Appliances.

Science.gov (United States)

Deetman, Sebastiaan; Pauliuk, Stefan; van Vuuren, Detlef P; van der Voet, Ester; Tukker, Arnold

2018-04-17

This study provides scenarios toward 2050 for the demand of five metals in electricity production, cars, and electronic appliances. The metals considered are copper, tantalum, neodymium, cobalt, and lithium. The study shows how highly technology-specific data on products and material flows can be used in integrated assessment models to assess global resource and metal demand. We use the Shared Socio-economic Pathways as implemented by the IMAGE integrated assessment model as a starting point. This allows us to translate information on the use of electronic appliances, cars, and renewable energy technologies into quantitative data on metal flows, through application of metal content estimates in combination with a dynamic stock model. Results show that total demand for copper, neodymium, and tantalum might increase by a factor of roughly 2 to 3.2, mostly as a result of population and GDP growth. The demand for lithium and cobalt is expected to increase much more, by a factor 10 to more than 20, as a result of future (hybrid) electric car purchases. This means that not just demographics, but also climate policies can strongly increase metal demand. This shows the importance of studying the issues of climate change and resource depletion together, in one modeling framework.

Scenarios for Demand Growth of Metals in Electricity Generation Technologies, Cars, and Electronic Appliances

Science.gov (United States)

2018-01-01

This study provides scenarios toward 2050 for the demand of five metals in electricity production, cars, and electronic appliances. The metals considered are copper, tantalum, neodymium, cobalt, and lithium. The study shows how highly technology-specific data on products and material flows can be used in integrated assessment models to assess global resource and metal demand. We use the Shared Socio-economic Pathways as implemented by the IMAGE integrated assessment model as a starting point. This allows us to translate information on the use of electronic appliances, cars, and renewable energy technologies into quantitative data on metal flows, through application of metal content estimates in combination with a dynamic stock model. Results show that total demand for copper, neodymium, and tantalum might increase by a factor of roughly 2 to 3.2, mostly as a result of population and GDP growth. The demand for lithium and cobalt is expected to increase much more, by a factor 10 to more than 20, as a result of future (hybrid) electric car purchases. This means that not just demographics, but also climate policies can strongly increase metal demand. This shows the importance of studying the issues of climate change and resource depletion together, in one modeling framework. PMID:29533657

Value Added Tax Impacton Economic Activity: Importance, Implication and Assessment –The Romanian Experience

Directory of Open Access Journals (Sweden)

Mariana MUREȘAN

2014-12-01

Full Text Available This paper studies the impact of VAT upon the economic activity in Romania. By developing a new mathematical model we offer several dy-namic and effcient possibilities for observing the modifcations caused by the temporary reduc-tion of taxes upon the personal incomes which suggest that the resulting additional incomes are often saved and less consumed. Analyzing several temporary reductions in incomes, the model describes also a scheme regarding the developments of economic growth. Based on this scheme, are revealed the different arrangements in which a present economic activity infuences a future one. According to the proposed model, it is highlighted that the national income increases as a response to the aggregated demand.

Polycyclic Aromatic Hydrocarbon and Metal Concentrations in Imported Canned Maize

OpenAIRE

Embbey K Ossai; Chukwujindu Maxwell Iwegbue; Elizabeth E. Ajogungbe; Godswill O Tesi

2014-01-01

Concentrations and profile of polycyclic aromatic hydrocarbons(PAHs) and metals (Cd, Pb, Ni, Cr, Fe and Mn) were determined in selected brands of canned maize in the Nigeria market with a view to providing information on the hazards associated with the consumption of these products. The measurement of the concentrations of PAHs was carried out by using a gas chromatography equipped with flame ionization detector (GC-FID) after extraction by ultra-sonication with acetone/dichloromethane and cl...

The importance of actions and the worth of an object: dissociable neural systems representing core value and economic value

Science.gov (United States)

Coppin, Géraldine; Schwartz, Sophie; Sander, David

2012-01-01

Neuroeconomic research has delineated neural regions involved in the computation of value, referring to a currency for concrete choices and decisions (‘economic value’). Research in psychology and sociology, on the other hand, uses the term ‘value’ to describe motivational constructs that guide choices and behaviors across situations (‘core value’). As a first step towards an integration of these literatures, we compared the neural regions computing economic value and core value. Replicating previous work, economic value computations activated a network centered on medial orbitofrontal cortex. Core value computations activated medial prefrontal cortex, a region involved in the processing of self-relevant information and dorsal striatum, involved in action selection. Core value ratings correlated with activity in precuneus and anterior prefrontal cortex, potentially reflecting the degree to which a core value is perceived as internalized part of one’s self-concept. Distributed activation pattern in insula and ACC allowed differentiating individual core value types. These patterns may represent evaluation profiles reflecting prototypical fundamental concerns expressed in the core value types. Our findings suggest mechanisms by which core values, as motivationally important long-term goals anchored in the self-schema, may have the behavioral power to drive decisions and behaviors in the absence of immediately rewarding behavioral options. PMID:21642352

APPLING REMOTE SENSING TECHNIQUE TO MONITORING SPATIAL EXPANSION OF IMPORTANT CITIES IN CHINA-INDOCHINA PENINSULA ECONOMIC CORRIDOR

Directory of Open Access Journals (Sweden)

J. Li

2017-09-01

Full Text Available Since twentieth Century, the process of economic globalization has made great progress, and Southeast Asia has developed rapidly under the background of international industrial transferring. In this paper, the 6 important nodes cities in China - Indochina Peninsula along the economic corridor are took as study area. The main data is time series Landsat data. The method of object-oriented random forest classification was used to extract the classification results of study area from 2000 to 2015. The urban expansion of the node cities was evaluated by calculating the expansion speed of the impervious surface and the landscape pattern metrics. The results indicated that the method of object oriented random forest classification can effectively extract the urban impervious surface. the overall accuracy is over 81 %, and the Kappa coefficient is over 0.82. In the past 15 years, the expansion speed of Vientiane city was fastest in 6 countries. The area of urban impervious surface expanded 8 times than that of 2000.The pattern of expansion is summarized as “gather first-diffuse then”, “diffuse first-gather then” and “gather”. Overall, the process of urbanization of these cities are still in the rising period.

Mineral constituents of medicinally important herbs mentha arvensis and ocimum basilicum

International Nuclear Information System (INIS)

Sahito, S.; Kazi, G.H.; Kazi, T.; Hafeez-u-Raman Shaikh; Memon, A.N.

2003-01-01

The role of elements particularly trace elements in health and disease are now well established. In this paper we investigate the presence of various elements in very common herbs Mentha arvensis (Mint, vern. Podina) and ocimum basilicum(vern Niazboo or Tulsi). Economically the both herbs have great importance as the source of volatile aromatic oils, medicines. Medicinal drugs like menthol is derived from Mentha arvensis, which is useful in cough and diarrhea. The samples of both plants were collected from surrounding of Hyderabad and vouchers specimens were prepared following the standard Herbarium techniques. The dried parts of each plant were digested with nitric acid and hydrogen peroxide and analysed by atomic absorption spectrophotometer technique using air acetylene flame to estimate various metals present in both herbs. (author)

Mineral constituents of medicinally important herbs mentha arvensis and ocimum basilicum

Energy Technology Data Exchange (ETDEWEB)

Sahito, S; Kazi, G H; Kazi, T [University of Sindh, Jamshoro (Pakistan). Centre of Excellence in Analytical Chemistry; Shar, G Q [Liaquat Univ. of Health and Sciences, Jamshoro (Pakistan); Shaikh, Hafeez-u-Raman [University of Sindh, Jamshoro (Pakistan). Inst. of Biochemistry; Memon, A N [University of Sindh, Jamshoro (Pakistan). Dept. of Botany

2003-06-01

The role of elements particularly trace elements in health and disease are now well established. In this paper we investigate the presence of various elements in very common herbs Mentha arvensis (Mint, vern. Podina) and ocimum basilicum(vern Niazboo or Tulsi). Economically the both herbs have great importance as the source of volatile aromatic oils, medicines. Medicinal drugs like menthol is derived from Mentha arvensis, which is useful in cough and diarrhea. The samples of both plants were collected from surrounding of Hyderabad and vouchers specimens were prepared following the standard Herbarium techniques. The dried parts of each plant were digested with nitric acid and hydrogen peroxide and analysed by atomic absorption spectrophotometer technique using air acetylene flame to estimate various metals present in both herbs. (author)

Metals, scraps and opportunities; Metales, chatarras y oportunidades

Energy Technology Data Exchange (ETDEWEB)

Roman Ortega, F.

2003-07-01

This article attempts to focus on the vision that recuperation and recycling of metals is an activity which must attract attention of Mine Engineers, as much for its increasing importance as the fact that the techniques involved are not anything else but adaptation, in certain conditions of the ones used in the treatment and benefit of the metallic ores. (Author)

Advanced breeder cycle uses metallic fuel

International Nuclear Information System (INIS)

Chang, Y.I.

1991-01-01

Scientists from Argonne National Laboratory have been developing a concept called the Integral fast Reactor (IFR). This fast breeder reactor could effectively increase Uranium resources a hundred fold making nuclear power essentially an inexhaustible energy source. The IFR is outlined. In the IFR, the inherent properties of liquid metal cooling are combined with a new metallic fuel which is allowed to swell and gives an improved burnup level and a radically different refining process to allow breakthroughs in passive safety, fuel cycle economics and waste management. (author)

Benchmark physics tests in the metallic-fuelled assembly ZPPR-15

International Nuclear Information System (INIS)

McFarlane, H.F.; Brumbach, S.B.; Carpenter, S.G.; Collins, P.J.

1987-01-01

In the last two years a shift in emphasis to inherent safety and economic competitiveness has led to a resurgence in US interest in metallic-alloy fuels for LMRs. Argonne National Laboratory initiated an extensive testing program for metallic-fuelled LMR technology that has included benchmark physics as one component. The tests done in the ZPPR-15 Program produced the first physics results in over 20 years for a metal-composition LMR core

Natural resources as a factor of economic growth in Kosovo

Directory of Open Access Journals (Sweden)

Haki Shatri

2015-11-01

Full Text Available In the history of the economic growth, there are numerous examples of countries that have developed based on their available natural resources. Especially, these assets have been the propulsion of the development in the initial period. But we also find some cases where countries with limited natural resources have experienced dynamic economic development. Kosovo is the last federal unit dismembered from former Yugoslavia after a decade under Milosevic’s Serbian regime and a two years’ war. International intervention and the inclusion of the country under an international protectorate created the conditions for the development of devastated economy by war and the robbery to be recovered together with the creation of institutional and economic infrastructure (Lidhja e Ekonomistëve të Kosovës, 1996. Under these conditions, everything had to start from scratch. The only development factor that Kosovo possessed was the human factor - age structure and the abundant natural resources, especially in key sectors such as the energy and in mining and minerals, agriculture and tourism. Thus it is sustainable the conclusion that “The rapid and sustainable economic and social development of Kosovo depends substantially from the implementation of the appropriate policies and suitable economic reforms that enable more rational use of its natural and human resources”. The list of the available resources of Kosovo is long. Kosovo possesses significant amount of all mineral raw materials in both quality and quantity terms. Among the most important raw materials have been ranked the power-lignite mining that is stretched into three basins and it is estimated to be around 9 billion exploitable tons (Kelmendi, 2012. Kosovo also owns mineral resources which are found in the Trepca’s Metals basin. The geological researches show favorable conditions of exploitation and high quality of the ore. Mainly one can found the lead, zinc, silver and other

Heavy metals adsorption on rolling mill scale; Adsorcion de metales pesados sobre cascarill de laminacion

Energy Technology Data Exchange (ETDEWEB)

Lopez, F. A.; Martin, M. I.; Perez, C.; Lopez-Delgado, A.; Alguacil, E. J.

2003-07-01

A great quantity of industries are responsible for contaminating the environment with the heavy metals which are containing in their wastewaters. The recovery of these metals is both from an environmental and economical points of view of the upmost interest. A study is made of the use of mill scale-originating in the hot rolling of steel-as an adsorbent for the removal of heavy metals from liquid effluents. The adsorption of Zn''2+, Cd''2+ y Pb''2+ on the rolling mill scale was investigated by determination of adsorption isotherms. The effect of time, equilibrium temperature and concentration of metal solution on mill scale adsorption efficiency was evaluated. The adsorption process was analysed using the theories of Langmuir and Freundlich. Desorption process of metals from loaded mill scales was also studied using several doser bent at different experimental conditions. It has been proved that the mill scale is an effective adsorbent for the cations studies in aqueous solutions within the range of the working concentrations. (Author) 32 refs.

Local knowledge of traditional fishermen on economically important crabs (Decapoda: Brachyura in the city of Conde, Bahia State, Northeastern Brazil

Directory of Open Access Journals (Sweden)

de Magalhães Henrique

2012-07-01

Full Text Available Abstract Background This article records the traditional knowledge of crab gatherers in the city of Conde, in the North Coast Region of Bahia State, Northeastern Brazil. Methods Data on biological and ecological aspects of economically important brachyuran crustaceans have been obtained from semi-structured interviews and in loco observations conducted from September 2007 to December 2009. A total of 57 fishermen of both genders, aged between 10 and 78 years have been interviewed (individually or collectively in different contexts; interviewees were asked about aspects such as external morphology, life cycle, trophic ecology, and spatial and temporal distribution of the major economically important brachyuran crustaceans in the region. Seven fishing communities were visited: Siribinha, Sítio do Conde, Poças, Ilha das Ostras, Cobó, Buri and Sempre Viva. Data were analyzed by comparing the information provided by participants with those from the specialized academic literature. Results The results show that artisanal fishermen have a wide ranging and well-grounded knowledge on the ecological and biological aspects of crustaceans. Crab gatherers of Conde know about growth and reproductive behavior of the animals they interact with, especially with regard to the three major biological aspects: “molt”, “walking dance” and “spawning”. Conclusion This knowledge constitutes an important source of information that should be considered in studies of management and sustainable use of fishery resources in the North Coast Region of Bahia State.

THE IMPORTANCE OF DIFFERENT TYPES OF COMPANIES WITH FOREIGN CAPITAL FOR ECONOMIC DEVELOPMENT

Directory of Open Access Journals (Sweden)

CEAUSESCU IONUȚ

2017-08-01

Full Text Available The process of globalization of economic relations international, in particular capital investments, it is accompanied by a multitude of forms of cooperation technology between firms. Globalization means, first of all, communications, computer science, economy based on information and knowledge, innovations, free circulation of capital flows and the expansion of markets. The answer of a firm or of the economy in the global competition requires flexibility, innovation and learning continue, networking (in the network and the investment in the image of the brand. The response of a state to the demands of the global market, consists in transferring technology and attracting foreign investment by creating a favorable business climate. An attractive business environment for investors requires a consistent system of facilities on which to base a medium to long-term business plan. We propose that, within this short study, we should carry out a radiography of the main types of foreignowned companies that contribute to the economic growth process and, implicitly, long-term to the economic development.

In Vitro Conservation of Some Threatened and Economically Important Ferns Belonging to the Indian Subcontinent

Directory of Open Access Journals (Sweden)

Shastri P. Shukla

2014-01-01

Full Text Available This study was undertaken to identify methods of mass multiplication for five ornamental, economically important ferns (Nephrolepis biserrata (Sw. Schott., N. cordifolia cv. ‘‘duffii’’ (L. Presl., N. exaltata cv. bostoniensis (L. Schott., Pteris vittata L., and Cyclosorus dentatus Link., and three threatened ferns, namely, Cyathea spinulosa Wall. ex. Hook, Pityrogramma calomelanos (L. Link., and Microsorum punctatum (L. Schott., through in vitro techniques. Collections were made from different biodiversity zones of India including Northeast Himalayas, Kumaon Himalayas, and Western Ghat and successfully introduced and grown in a fern-house. Aseptic cultures were raised at the morphogenic level of callus, axillary shoot, multiple shoot, and rooted plants. An optimized medium is described for each fern species. Plantlets were also produced from spore culture of Cyathea spinulosa and successfully hardened under fern house conditions.

A review on the importance of metals and metalloids in atmospheric dust and aerosol from mining operations.

Science.gov (United States)

Csavina, Janae; Field, Jason; Taylor, Mark P; Gao, Song; Landázuri, Andrea; Betterton, Eric A; Sáez, A Eduardo

2012-09-01

Contaminants can be transported rapidly and over relatively long distances by atmospheric dust and aerosol relative to other media such as water, soil and biota; yet few studies have explicitly evaluated the environmental implications of this pathway, making it a fundamental but understudied transport mechanism. Although there are numerous natural and anthropogenic activities that can increase dust and aerosol emissions and contaminant levels in the environment, mining operations are notable with respect to the quantity of particulates generated, the global extent of area impacted, and the toxicity of contaminants associated with the emissions. Here we review (i) the environmental fate and transport of metals and metalloids in dust and aerosol from mining operations, (ii) current methodologies used to assess contaminant concentrations and particulate emissions, and (iii) the potential health and environmental risks associated with airborne contaminants from mining operations. The review evaluates future research priorities based on the available literature and suggest that there is a particular need to measure and understand the generation, fate and transport of airborne particulates from mining operations, specifically the finer particle fraction. More generally, our findings suggest that mining operations play an important but underappreciated role in the generation of contaminated atmospheric dust and aerosol and the transport of metal and metalloid contaminants, and highlight the need for further research in this area. The role of mining activities in the fate and transport of environmental contaminants may become increasingly important in the coming decades, as climate change and land use are projected to intensify, both of which can substantially increase the potential for dust emissions and transport. Copyright © 2012 Elsevier B.V. All rights reserved.

A Review on the Importance of Metals and Metalloids in Atmospheric Dust and Aerosol from Mining Operations

Science.gov (United States)

Csavina, Janae; Field, Jason; Taylor, Mark P.; Gao, Song; Landázuri, Andrea; Betterton, Eric A.; Sáez, A. Eduardo

2012-01-01

Contaminants can be transported rapidly and over relatively long distances by atmospheric dust and aerosol relative to other media such as water, soil and biota; yet few studies have explicitly evaluated the environmental implications of this pathway, making it a fundamental but understudied transport mechanism. Although there are numerous natural and anthropogenic activities that can increase dust and aerosol emissions and contaminant levels in the environment, mining operations are notable with respect to the quantity of particulates generated, the global extent of area impacted, and the toxicity of contaminants associated with the emissions. Here we review (i) the environmental fate and transport of metals and metalloids in dust and aerosol from mining operations, (ii) current methodologies used to assess contaminant concentrations and particulate emissions, and (iii) the potential health and environmental risks associated with airborne contaminants from mining operations. The review evaluates future research priorities based on the available literature and suggest that there is a particular need to measure and understand the generation, fate and transport of airborne particulates from mining operations, specifically the finer particle fraction. More generally, our findings suggest that mining operations play an important but underappreciated role in the generation of contaminated atmospheric dust and aerosol and the transport of metal and metalloid contaminants, and highlight the need for further research in this area. The role of mining activities in the fate and transport of environmental contaminants may become increasingly important in the coming decades, as climate change and land use are projected to intensify, both of which can substantially increase the potential for dust emissions and transport. PMID:22766428

Metal decontamination for waste minimization using liquid metal refining technology

International Nuclear Information System (INIS)

Joyce, E.L. Jr.; Lally, B.; Ozturk, B.; Fruehan, R.J.

1993-01-01

The current Department of Energy Mixed Waste Treatment Project flowsheet indicates that no conventional technology, other than surface decontamination, exists for metal processing. Current Department of Energy guidelines require retrievable storage of all metallic wastes containing transuranic elements above a certain concentration. This project is in support of the National Mixed Low Level Waste Treatment Program. Because of the high cost of disposal, it is important to develop an effective decontamination and volume reduction method for low-level contaminated metals. It is important to be able to decontaminate complex shapes where surfaces are hidden or inaccessible to surface decontamination processes and destruction of organic contamination. These goals can be achieved by adapting commercial metal refining processes to handle radioactive and organic contaminated metal. The radioactive components are concentrated in the slag, which is subsequently vitrified; hazardous organics are destroyed by the intense heat of the bath. The metal, after having been melted and purified, could be recycled for use within the DOE complex. In this project, we evaluated current state-of-the-art technologies for metal refining, with special reference to the removal of radioactive contaminants and the destruction of hazardous organics. This evaluation was based on literature reports, industrial experience, plant visits, thermodynamic calculations, and engineering aspects of the various processes. The key issues addressed included radioactive partitioning between the metal and slag phases, minimization of secondary wastes, operability of the process subject to widely varying feed chemistry, and the ability to seal the candidate process to prevent the release of hazardous species

The Future of Economic Power

OpenAIRE

Malanciuc Bogdan Simion

2014-01-01

The importance of power in the development of society is undeniable. The power relations between national economies are more and more important and should be considered in every international economics analysis. Economic power has become the bedrock of both the military and the political power. Today the balance of economic power is shifting. The emerging states (China in the first place) are now demanding a greater role in global politics, challenging the existing international order dominat...

IS IT IMPORTANT THE ACCOUNTING MODEL USED BY THE ECONOMIC ENTITY IN MAKING DECISIONS BY THE USERS OF THE INFORMATION? POINTS OF VIEW.

Directory of Open Access Journals (Sweden)

Luminita Rus

2014-07-01

Full Text Available Nowadays it is vital to stay informed. But why is the information so important? The following will present the role and the importance of accounting information in decision-making regarding economic entity. Is accounting information a want or a need? Can accounting information be interpreted correctly indifferent of the accounting model used? Decisions made by the consumers of accounting information would be the same in terms of using the "cash" or "accrual" method? Based on these questions, this paper presents data as a whole for everyone and from where each consumer of information can extract only the part that they are interested in and which is useful for them. This paper follows the interests of users of accounting information regarding the interest, the need for information and the decisions they may take as a result of the information received, and also of the accounting model used by the entity from which the information is expected. This paper does not include all users of the accounting information that have interest in the economic entity, nor does it take into account all the information that are affected by the use of a model of accounting or the other one of the economic entity, but we can conclude that there are situations in which users ' decisions are influenced by the accounting model used, and others where there is no influence. We can't rule on any model to be the best; it is good that provides useful information showing the true reality of the economic entity.

Heavy metals adsorption on blast furnace sludges; Adsorcion de metales pesados sobre lodos de horno alto

Energy Technology Data Exchange (ETDEWEB)

Lopez-Delgado, A.; Perez, C.; Lopez, F.A. [Centro Nacional de Investigaciones Metalurgicas. CENIM. Madrid (Spain)

1998-10-01

Most of industrial liquid effluents have high contents of heavy metals. The recovery of these metals is environmental and economically interesting. In this work we study the use of sludge, a by-product of the steel industry, as an adsorbent for the removal of heavy metals from liquid effluents. The adsorption of Pb``2+, Zn``2+, Cd``2+, Cu``2+ and Cr``3+ on the sludge was investigated by determination of adsorption isotherms. The effect of time, equilibrium temperature and concentration of metal solution on sludge adsorption efficiency was evaluated. The adsorption process was analysed using the theories of Freundlich and Langumuir and the thermodynamic values {Delta}G, {Delta}H and {Delta}S corresponding to each adsorption process were calculated. Blast furnace sludge was found to be an effective sorbent for Pb, Zn, Cd, Cu and Cr-ions within the range of ion concentrations employed. (Author) 5 refs.

Technical and economic evaluation of hydrogen storage systems based on light metal hydrides

Energy Technology Data Exchange (ETDEWEB)

Jepsen, Julian

2014-07-01

Novel developments regarding materials for solid-state hydrogen storage show promising prospects. These complex hydrides exhibit high mass-related storage capacities and thus great technical potential to store hydrogen in an efficient and safe way. However, a comprehensive evaluation of economic competitiveness is still lacking, especially in the case of the LiBH4 / MgH2 storage material. In this study, an assessment with respect to the economic feasibility of implementing complex hydrides as hydrogen storage materials is presented. The cost structure of hydrogen storage systems based on NaAlH4 and LiBH4 / MgH2 is discussed and compared with the conventional high pressure (700 bar) and liquid storage systems. Furthermore, the properties of LiBH4 / MgH2, so-called Li-RHC (Reactive Hydride Composite), are scientifically compared and evaluated on the lab and pilot plant scale. To enhance the reaction rate, the addition of TiCl3 is investigated and high energy ball milling is evaluated as processing technique. The effect of the additive in combination with the processing technique is described in detail. Finally, an optimum set of processing parameters and additive content are identified and can be applied for scaled-up production of the material based on simple models considering energy input during processing. Furthermore, thermodynamic, heat transfer and kinetic properties are experimentally determined by different techniques and analysed as a basis for modelling and designing scaled-up storage systems. The results are analysed and discussed with respect to the reaction mechanisms and reversibility of the system. Heat transfer properties are assessed with respect to the scale-up for larger hydrogen storage systems. Further improvements of the heat transfer were achieved by compacting the material. In this regard, the influence of the compaction pressure on the apparent density, thermal conductivity and sorption behaviour, was investigated in detail. Finally, scaled

Metallurgical recovery of metals from electronic waste: A review

International Nuclear Information System (INIS)

Cui Jirang; Zhang Lifeng

2008-01-01

Waste electric and electronic equipment, or electronic waste, has been taken into consideration not only by the government but also by the public due to their hazardous material contents. In the detailed literature survey, value distributions for different electronic waste samples were calculated. It is showed that the major economic driver for recycling of electronic waste is from the recovery of precious metals. The state of the art in recovery of precious metals from electronic waste by pyrometallurgical processing, hydrometallurgical processing, and biometallurgical processing are highlighted in the paper. Pyrometallurgical processing has been a traditional technology for recovery of precious metals from waste electronic equipment. However, state-of-the-art smelters are highly depended on investments. Recent research on recovery of energy from PC waste gives an example for using plastics in this waste stream. It indicates that thermal processing provides a feasible approach for recovery of energy from electronic waste if a comprehensive emission control system is installed. In the last decade, attentions have been removed from pyrometallurgical process to hydrometallurgical process for recovery of metals from electronic waste. In the paper, hydrometallurgical processing techniques including cyanide leaching, halide leaching, thiourea leaching, and thiosulfate leaching of precious metals are detailed. In order to develop an environmentally friendly technique for recovery of precious metals from electronic scrap, a critical comparison of main leaching methods is analyzed for both economic feasibility and environmental impact. It is believed that biotechnology has been one of the most promising technologies in metallurgical processing. Bioleaching has been used for recovery of precious metals and copper from ores for many years. However, limited research was carried out on the bioleaching of metals from electronic waste. In the review, initial researches on the

Metallurgical recovery of metals from electronic waste: A review

Energy Technology Data Exchange (ETDEWEB)

Cui Jirang [Department of Materials Science and Engineering, Norwegian University of Science and Technology (NTNU), Alfred Getz vei 2, N-7491 Trondheim (Norway)], E-mail: Jirang.Cui@material.ntnu.no; Zhang Lifeng [Department of Materials Science and Engineering, Norwegian University of Science and Technology (NTNU), Alfred Getz vei 2, N-7491 Trondheim (Norway)], E-mail: zhanglife@mst.edu

2008-10-30

Waste electric and electronic equipment, or electronic waste, has been taken into consideration not only by the government but also by the public due to their hazardous material contents. In the detailed literature survey, value distributions for different electronic waste samples were calculated. It is showed that the major economic driver for recycling of electronic waste is from the recovery of precious metals. The state of the art in recovery of precious metals from electronic waste by pyrometallurgical processing, hydrometallurgical processing, and biometallurgical processing are highlighted in the paper. Pyrometallurgical processing has been a traditional technology for recovery of precious metals from waste electronic equipment. However, state-of-the-art smelters are highly depended on investments. Recent research on recovery of energy from PC waste gives an example for using plastics in this waste stream. It indicates that thermal processing provides a feasible approach for recovery of energy from electronic waste if a comprehensive emission control system is installed. In the last decade, attentions have been removed from pyrometallurgical process to hydrometallurgical process for recovery of metals from electronic waste. In the paper, hydrometallurgical processing techniques including cyanide leaching, halide leaching, thiourea leaching, and thiosulfate leaching of precious metals are detailed. In order to develop an environmentally friendly technique for recovery of precious metals from electronic scrap, a critical comparison of main leaching methods is analyzed for both economic feasibility and environmental impact. It is believed that biotechnology has been one of the most promising technologies in metallurgical processing. Bioleaching has been used for recovery of precious metals and copper from ores for many years. However, limited research was carried out on the bioleaching of metals from electronic waste. In the review, initial researches on the

Regional Economic Resilience: Resistance and Recoverability of Resource-Based Cities during Economic Crises in Northeast China

Directory of Open Access Journals (Sweden)

Juntao Tan

2017-11-01

Full Text Available This paper quantitatively analyzes the economic resilience of resource-based cities (RBCs in Northeast China in terms of resistance and recoverability during two economic crises: the Asian financial crisis and the global financial crisis. Moreover, it analyzes the main factors that affected regional resilience. There are three main findings. First, the RBCs in general demonstrated poor resistance during both recessions, but there were variations among the different types of RBCs. Petroleum and metal cities demonstrated the most resistance, whereas coal cities performed the worst. Second, the influential factors affecting economic resilience varied across the two economic cycles, but location advantage, research and development (R and D intensity, foreign trade dependence ratio, and supporting policies had positive effects on resilience during both economic cycles, while the proportion of employed persons in resource industries had a negative effect. Industrial diversity had a weak and ambiguous effect on resilience. Third, the secondary industry was more resilient during the Asian financial crisis, but the tertiary industry was more resilient during the global financial crisis. This shift may be attributed to both the nature of the crises and the strength of the sectors at the time of the crises.

The Importance of Broadband for Socio-Economic Development: A Perspective from Rural Australia

Directory of Open Access Journals (Sweden)

Julie Freeman

2016-10-01

Full Text Available Advanced connectivity offers rural communities prospects for socio-economic development. Despite Australia’s national broadband infrastructure plans, inferior availability and quality of rural Internet connections remain persistent issues. This article examines the impact of limited connectivity on rural socio-economic opportunities, drawing from the views of twelve citizens from the Boorowa local government area in New South Wales. The available fixed wireless and satellite connections in Boorowa are slow and unreliable, and remote regions in the municipality are still without any Internet access. Participants identified four key areas in their everyday lives that are impacted by insufficient connectivity: business development, education, emergency communication, and health. Rural citizens often already face challenges in these areas, and infrastructure advancements in urban spaces can exacerbate rural-urban disparities. Participants’ comments demonstrated apprehension that failure to improve connectivity would result in adverse long-term consequences for the municipality. This article suggests that current broadband policy frameworks require strategic adaptations to account for the socio-economic and geographic contexts of rural communities. In order to narrow Australia’s rural-urban digital divide, infrastructure developments should be prioritised in the most underserved regions.

Nuclear fuel cycle waste recycling technology deverlopment - Radioactive metal waste recycling technology development

International Nuclear Information System (INIS)

Oh, Won Zin; Moon, Jei Kwon; Jung, Chong Hun; Park, Sang Yoon

1998-08-01

With relation to recycling of the radioactive metal wastes which are generated during operation and decommissioning of nuclear facilities, the following were described in this report. 1. Analysis of the state of the art on the radioactive metal waste recycling technologies. 2. Economical assessment on the radioactive metal waste recycling. 3. Process development for radioactive metal waste recycling, A. Decontamination technologies for radioactive metal waste recycling. B. Decontamination waste treatment technologies, C. Residual radioactivity evaluation technologies. (author). 238 refs., 60 tabs., 79 figs

Recovering metals from sewage sludge, waste incineration residues and similar substances with hyperaccumulative plants

Science.gov (United States)

Kisser, Johannes; Gattringer, Heinz; Iordanopoulos-Kisser, Monika

2015-04-01

Sewage sludges as well as ashes from waste incineration plants are known accumulation sinks of many elements that are either important nutrients for biological organisms (phosphorus, potassium, magnesium, etc.) or valuable metals when considered on their own in pure form (nickel, chrome, zinc, etc.); they are also serious pollutants when they occur in wild mixtures at localized anthropogenic end- of-stream points. Austria and many other countries have to import up to 90% of the material inputs of metals from abroad. These primary resources are becoming more expensive as they become more scarce and remaining deposits more difficult to mine, which is a serious concern for industrialized nations. Basic economic and strategic reasoning demands an increase in recycling activities and waste minimization. Technologies to recover metals in a reasonable and economically relevant manner from very diffuse sources are practically non-existent or require large amounts of energy and chemicals, which pose environmental risks. On the other hand agriculture uses large volumes of mineral fertilizers, which are often sourced from mines as well, and thus are also subject to the same principle of finiteness and potential shortage in supply. These converted biological nutrients are taken up by crops and through the food chain and human consumption end up in sewage systems and in wastewater treatment plants in great quantities. The metabolized nutrients mostly do not return to agriculture, but due to contamination with heavy metals are diverted to be used as construction aggregates or are thermally treated and end up rather uselessly in landfills. The project BIO-ORE aimed to explore new pathways to concentrate metals from diluted sources such as sewage sludge and wastewater by using highly efficient biological absorption and transport mechanisms. These enzymatic systems from plants work with very little energy input. The process is called bioaccumulation and can be most effectively

EXPERIMENT IN ECONOMICS

OpenAIRE

Basilgan, Müslüm

2011-01-01

In contrast to sciences such as physics, chemistry and psychology, using experimental methods in economics has encountered significant resistance reaching as far back as Mill. The basic reason for the resistance is the widely accepted view that experiment is not suited to analyzing complex human activity including economic behaviors. However, experimental studies, which started to test economics theories from the 1940s, have now reached an important point. The purpose of this study is to show...

The tribology of metal-on-metal total hip replacements.

Science.gov (United States)

Scholes, S C; Unsworth, A

2006-02-01

Total hip surgery is an effective way of alleviating the pain and discomfort caused by diseased or damaged joints. However, in the majority of cases, these joints have a finite life. The main reason for failure is osteolysis (bone resorption). It is well documented that an important cause of osteolysis, and therefore the subsequent loosening and failure of conventional metal- or ceramic-on-ultra-high molecular weight polyethylene joints, is the body's immunological response to the polyethylene wear particles. To avoid this, interest has been renewed in metal-on-metal joints. The intention of this paper is to review the studies that have taken place within different laboratories to determine the tribological performance of new-generation metal-on-metal total hip replacements. These types of joint offer a potential solution to enhance the longevity of prosthetic hip systems; however, problems may arise owing to the effects of metal ion release, which are, as yet, not fully understood.

Economics of ALMR deployment

International Nuclear Information System (INIS)

Delene, J.G.; Fuller, L.C.; Hudson, C.R.

1994-01-01

The Advanced Liquid Metal Reactor (ALMR) has the potential to extend the economic life of the nuclear option and of reducing the number of high level waste repositories which will eventually be needed in an expanding nuclear economy. This paper reports on an analysis which models and evaluates the economics of the use of ALMRs as a component of this country's future electricity generation mix. The ALMR concept has the ability to utilize as fuel the fissile material contained in previously irradiated nuclear fuel (i.e., spent fuel) or from surplus weapons grade material. While not a requirement for the successful deployment of ALMR power plant technology, the reprocessing of spent fuel from light water reactors (LWR) is necessary for any rapid introduction of ALMR power plants. In addition, the reprocessing of LWR spent fuel may reduce the number of high level waste repositories needed in the future by burning the long-lived actinides produced in the fission process. With this study, the relative economics of a number of potential scenarios related to these issues are evaluated. While not encompassing the full range of all possibilities, the cases reported here provide an indication of the potential costs, timings, and relative economic attractiveness of ALMR deployment

Improvement of non-key traits in radiata pine breeding programme when long-term economic importance is uncertain.

Science.gov (United States)

Li, Yongjun; Dungey, Heidi; Yanchuk, Alvin; Apiolaza, Luis A

2017-01-01

Diameter at breast height (DBH), wood density (DEN) and predicted modulus of elasticity (PME) are considered as 'key traits' (KT) in the improvement in radiata pine breeding programmes in New Zealand. Any other traits which are also of interest to radiata pine breeders and forest growers are called 'non-key traits' (NKTs). External resin bleeding (ERB), internal checking (IC), number of heartwood rings (NHR) are three such non-key traits which affect wood quality of radiata pine timber. Economic importance of the KTs and NKTs is hard to define in radiata pine breeding programmes due to long rotation period. Desired-gain index (DGIs) and robust selection were proposed to incorporate NKTs into radiata pine breeding programme in order to deal with the uncertainty of economic importance. Four desired-gain indices A-D were proposed in this study. The desired-gain index A (DGI-A) emphasized growth and led to small decrease in ERB and small increase in IC and NHR. The expected genetic gains of all traits in the desired-gain index B (DGI-B) were in the favourable directions (positive genetic gains in the key traits and negative genetic gains in the non-key traits). The desired-gain index C (DGI-C) placed emphasis on wood density, leading to favourable genetic gain in the NKTs but reduced genetic gains for DBH and PME. The desired-gain index D (DGI-D) exerted a bit more emphasis on the non-key traits, leading large favourable reduction in the non-key traits and lower increase in the key traits compared with the other DGIs. When selecting both the key traits and the non-key traits, the average EBVs of six traits were all in the same directions as the expected genetic gains except for DBH in the DGI-D. When the key traits were measured and selected, internal checking always had a negative (favourable) genetic gain but ERB and NHR had unfavourable genetic gain in the most of time. After removing some individuals with high sensitivity to the change of economic weights, robust

Improvement of non-key traits in radiata pine breeding programme when long-term economic importance is uncertain.

Directory of Open Access Journals (Sweden)

Yongjun Li

Full Text Available Diameter at breast height (DBH, wood density (DEN and predicted modulus of elasticity (PME are considered as 'key traits' (KT in the improvement in radiata pine breeding programmes in New Zealand. Any other traits which are also of interest to radiata pine breeders and forest growers are called 'non-key traits' (NKTs. External resin bleeding (ERB, internal checking (IC, number of heartwood rings (NHR are three such non-key traits which affect wood quality of radiata pine timber. Economic importance of the KTs and NKTs is hard to define in radiata pine breeding programmes due to long rotation period. Desired-gain index (DGIs and robust selection were proposed to incorporate NKTs into radiata pine breeding programme in order to deal with the uncertainty of economic importance. Four desired-gain indices A-D were proposed in this study. The desired-gain index A (DGI-A emphasized growth and led to small decrease in ERB and small increase in IC and NHR. The expected genetic gains of all traits in the desired-gain index B (DGI-B were in the favourable directions (positive genetic gains in the key traits and negative genetic gains in the non-key traits. The desired-gain index C (DGI-C placed emphasis on wood density, leading to favourable genetic gain in the NKTs but reduced genetic gains for DBH and PME. The desired-gain index D (DGI-D exerted a bit more emphasis on the non-key traits, leading large favourable reduction in the non-key traits and lower increase in the key traits compared with the other DGIs. When selecting both the key traits and the non-key traits, the average EBVs of six traits were all in the same directions as the expected genetic gains except for DBH in the DGI-D. When the key traits were measured and selected, internal checking always had a negative (favourable genetic gain but ERB and NHR had unfavourable genetic gain in the most of time. After removing some individuals with high sensitivity to the change of economic weights

Development Trends And Economic Assessment Of The Integration Processes On The Metals Market

OpenAIRE

Romanova, Olga A.; Makarov, Eduard V.

2018-01-01

The article examines the integration process from the perspective of three dimensions, which characterize the increase in quantity and appearance of new relationships; strength, character and stability of emerging communications; dynamics and the proper form of the process. The authors identify the development trends of the integration processes in the metals market and provide justification for the breaking of the period of Russian metal trading for 1991–2016 into five stages of development....

The efficient importation and distribution of radioisotopes. Suggestions for the most economic importation of radioisotopes

Energy Technology Data Exchange (ETDEWEB)

NONE

1963-08-01

In the course of their work in many Member States, IAEA technical assistance experts have sometimes encountered difficulties in connection with the importation of radioactive isotopes. In some countries they have been consulted as to the possible improvement of import procedures. The purpose of this publication is to summarize the experience that has been gained in the hope that it may be useful both to scientists who wish to import radioisotopes for their work and to public officials who are concerned with the administrative and financial aspects of the problem. This question is of considerable importance because many countries have only limited resources of scientific man-power and foreign exchange and hence it is essential, if these resources are to be utilized fully, that efficient importing procedures be established. Furthermore, the success or failure of technical assistance activities may depend on whether radioisotopes needed for the project can be efficiently imported. Although the data summarized in this publication are based mainly on the experience of medical users of radioisotopes, they are equally applicable to their uses in other fields such as agriculture and hydrology. This publication covers the subject of importation and distribution of radioisotopes, and concludes with a brief section on the domestic production of short-lived radioisotopes in research reactors.

The efficient importation and distribution of radioisotopes. Suggestions for the most economic importation of radioisotopes

International Nuclear Information System (INIS)

1963-01-01

In the course of their work in many Member States, IAEA technical assistance experts have sometimes encountered difficulties in connection with the importation of radioactive isotopes. In some countries they have been consulted as to the possible improvement of import procedures. The purpose of this publication is to summarize the experience that has been gained in the hope that it may be useful both to scientists who wish to import radioisotopes for their work and to public officials who are concerned with the administrative and financial aspects of the problem. This question is of considerable importance because many countries have only limited resources of scientific man-power and foreign exchange and hence it is essential, if these resources are to be utilized fully, that efficient importing procedures be established. Furthermore, the success or failure of technical assistance activities may depend on whether radioisotopes needed for the project can be efficiently imported. Although the data summarized in this publication are based mainly on the experience of medical users of radioisotopes, they are equally applicable to their uses in other fields such as agriculture and hydrology. This publication covers the subject of importation and distribution of radioisotopes, and concludes with a brief section on the domestic production of short-lived radioisotopes in research reactors

Plant responses to metal toxicity

Energy Technology Data Exchange (ETDEWEB)

Briat, J.F. [Montpellier-2 Univ., 34 (France). Biochimie et physiologie moleculaire des plantes, CNRS, URA 2133; Lebrun, M. [Montpellier-2 Univ., 34 (France). Biochimie et physiologie vegetale appliquee

1999-01-01

Increased metal concentration in the soils, up to toxic levels, is becoming an important environmental problem. Safety rule evolution will require solutions in order to cope with food safety rules, and to freeze metal leakage from heavily metal-poisoned soils, such as those from industrial fallows. In this context, plants could serve to develop bio-assays in order to promote new standards, more realistic than the mass of a given metal per kg of soil, that does not consider the metal bio-disponibility. Plants could also be used for phyto-extraction and/or phyto-stabilization. To reach these objectives, a genetic approach could be useful to generate metal-tolerant plants with enough biomass. In this work is more particularly studied the plant responses to metal toxicity. Metal toxicity for living organisms involves oxidative and /or genotoxic mechanisms. Plant protection against metal toxicity occurs, at least in part, through control of root metal uptake and of long distance metal transport. Inside cells, proteins such as ferritins and metallothioneins, and glutathione-derived peptides named phyto-chelatins, participate in excess metal storage and detoxification. Low molecular weight organic molecules, mainly organic acids and amino acids and their derivatives, also play an important role in plant metal homeostasis. When these systems are overloaded, oxidative stress defense mechanisms are activated. Molecular and cellular knowledge of these processes will be necessary to improve plant metal resistance. Occurrence of naturally tolerant plants which hyper accumulate metals provides helpful tools for this research. (authors) 130 refs.

Gas-Cooled Reactors: the importance of their development

International Nuclear Information System (INIS)

Kasten, P.R.

1978-01-01

Gas-Cooled Reactors are considered to have a significant future impact on the application of fission energy. The specific types are the steam-cycle High-Temperature Gas-Cooled Reactor, the Gas-Cooled Fast Breeder Reactor, the gas-turbine HTGR, and the Very High-Temperature Process Heat Reactor. The importance of developing the above systems is discussed relative to alternative fission power systems involving Light Water Reactors, Heavy Water Reactors, Spectral Shift Controlled Reactors, and Liquid-Metal-Cooled Fast Breeder Reactors. A primary advantage of developing GCRs as a class lies in the technology and cost interrelations, permitting cost-effective development of systems having diverse applications. Further, HTGR-type systems have highly proliferation-resistant characteristics and very attractive safety features. Finally, such systems and GCFRs are mutally complementary. Overall, GCRs provide interrelated systems that serve different purposes and needs; their development can proceed in stages that provide early benefits while contributing to future needs. It is concluded that the long-term importance of the various GCRs is as follows: HTGR, providing a technology for economic GCFRs and HTGR-GTs, while providing a proliferation-resistant reactor system having early economic and fuel utilization benefits; GCFR, providing relatively low cost fissile fuel and reducing overall separative work needs at capital costs lower than those for LMFBRs; HTGR-GT (in combination with a bottoming cycle), providing a very high thermal efficiency system having low capital costs and improved fuel utilization and technology pertinent to VHTRs; HTGR-GT, providing a power system well suited for dry cooling conditions for low-temperature process heat needs; and VHTR, providing a high-temperature heat source for hydrogen production processes

Economic calculation in socialist countries

NARCIS (Netherlands)

Ellman, M.; Durlauf, S.N.; Blume, L.E.

2008-01-01

In the 1930s, when the classical socialist system emerged, economic decisions were based not on detailed and precise economic methods of calculation but on rough and ready political methods. An important method of economic calculation - particularly in the post-Stalin period - was that of

Recovering valuable metals from recycled photovoltaic modules.

Science.gov (United States)

Yi, Youn Kyu; Kim, Hyun Soo; Tran, Tam; Hong, Sung Kil; Kim, Myong Jun

2014-07-01

Recovering valuable metals such as Si, Ag, Cu, and Al has become a pressing issue as end-of-life photovoltaic modules need to be recycled in the near future to meet legislative requirements in most countries. Of major interest is the recovery and recycling of high-purity silicon (> 99.9%) for the production of wafers and semiconductors. The value of Si in crystalline-type photovoltaic modules is estimated to be -$95/kW at the 2012 metal price. At the current installed capacity of 30 GW/yr, the metal value in the PV modules represents valuable resources that should be recovered in the future. The recycling of end-of-life photovoltaic modules would supply > 88,000 and 207,000 tpa Si by 2040 and 2050, respectively. This represents more than 50% of the required Si for module fabrication. Experimental testwork on crystalline Si modules could recover a > 99.98%-grade Si product by HNO3/NaOH leaching to remove Al, Ag, and Ti and other metal ions from the doped Si. A further pyrometallurgical smelting at 1520 degrees C using CaO-CaF2-SiO2 slag mixture to scavenge the residual metals after acid leaching could finally produce > 99.998%-grade Si. A process based on HNO3/NaOH leaching and subsequent smelting is proposed for recycling Si from rejected or recycled photovoltaic modules. Implications: The photovoltaic industry is considering options of recycling PV modules to recover metals such as Si, Ag, Cu, Al, and others used in the manufacturing of the PV cells. This is to retain its "green" image and to comply with current legislations in several countries. An evaluation of potential resources made available from PV wastes and the technologies used for processing these materials is therefore of significant importance to the industry. Of interest are the costs of processing and the potential revenues gained from recycling, which should determine the viability of economic recycling of PV modules in the future.

How important is homeland education for refugees' economic position in the Netherlands?

NARCIS (Netherlands)

Hartog, J.; Zorlu, A.

2009-01-01

We use data on refugees admitted to The Netherlands that include registration of education in their homeland by immigration officers. Such data are seldom available. We investigate the quality and reliability of the registrations and then use them to assess effects on refugees’ economic position

The Importance of Transition Metals in the Expanding Network of Microbial Metabolism in the Archean Eon

Science.gov (United States)

Moore, E. K.; Jelen, B. I.; Giovannelli, D.; Prabhu, A.; Raanan, H.; Falkowski, P. G.

2017-12-01

Deep time changes in Earth surface redox conditions, particularly due to global oxygenation, has impacted the availability of different metals and substrates that are central in biology. Oxidoreductase proteins are molecular nanomachines responsible for all biological electron transfer processes across the tree of life. These enzymes largely contain transition metals in their active sites. Microbial metabolic pathways form a global network of electron transfer, which expanded throughout the Archean eon. Older metabolisms (sulfur reduction, methanogenesis, anoxygenic photosynthesis) accessed negative redox potentials, while later evolving metabolisms (oxygenic photosynthesis, nitrification/denitrification, aerobic respiration) accessed positive redox potentials. The incorporation of different transition metals facilitated biological innovation and the expansion of the network of microbial metabolism. Network analysis was used to examine the connections between microbial taxa, metabolic pathways, crucial metallocofactors, and substrates in deep time by incorporating biosignatures preserved in the geologic record. Nitrogen fixation and aerobic respiration have the highest level of betweenness among metabolisms in the network, indicating that the oldest metabolisms are not the most central. Fe has by far the highest betweenness among metals. Clustering analysis largely separates High Metal Bacteria (HMB), Low Metal Bacteria (LMB), and Archaea showing that simple un-weighted links between taxa, metabolism, and metals have phylogenetic relevance. On average HMB have the highest betweenness among taxa, followed by Archaea and LMB. There is a correlation between the number of metallocofactors and metabolic pathways in representative bacterial taxa, but Archaea do not follow this trend. In many cases older and more recently evolved metabolisms were clustered together supporting previous findings that proliferation of metabolic pathways is not necessarily chronological.

Economic assessment of a waste hydrogen utilization project

International Nuclear Information System (INIS)

Zhou, H.; Wang, L.; Zhou, W.; Wu, J.; Wang, Q.

1993-01-01

This article reports an economic assessment on a hydride hydrogen recovery, purification, storage, transportation and application project (HRPSTA) set for a system including a nitrogenous fertilizer plant and a float glass factory. In this project, a pretreatment unit and metal hydride containers are used to recover and purify the hydrogen from the purge gas of the ammonia fertilizer plant and to transport and use the hydrogen in the tin bath in the float glass factory. Detailed economic assessment, cost analysis and a cash flow statement are presented, and financial net present value (NPV), as well as intrinsic rate of return (IRR), is calculated. The results shows that this project, which is feasible technologically, is profitable economically. (Author)

Removal of heavy metals from emerging cellulosic low-cost adsorbents: a review

Science.gov (United States)

Malik, D. S.; Jain, C. K.; Yadav, Anuj K.

2017-09-01

Heavy metal pollution is a major problems in the environment. The impact of toxic metal ions can be minimized by different technologies, viz., chemical precipitation, membrane filtration, oxidation, reverse osmosis, flotation and adsorption. But among them, adsorption was found to be very efficient and common due to the low concentration of metal uptake and economically feasible properties. Cellulosic materials are of low cost and widely used, and very promising for the future. These are available in abundant quantity, are cheap and have low or little economic value. Different forms of cellulosic materials are used as adsorbents such as fibers, leaves, roots, shells, barks, husks, stems and seed as well as other parts also. Natural and modified types of cellulosic materials are used in different metal detoxifications in water and wastewater. In this review paper, the most common and recent materials are reviewed as cellulosic low-cost adsorbents. The elemental properties of cellulosic materials are also discussed along with their cellulose, hemicelluloses and lignin contents.

Automated economic analysis model for hazardous waste minimization

International Nuclear Information System (INIS)

Dharmavaram, S.; Mount, J.B.; Donahue, B.A.

1990-01-01

The US Army has established a policy of achieving a 50 percent reduction in hazardous waste generation by the end of 1992. To assist the Army in reaching this goal, the Environmental Division of the US Army Construction Engineering Research Laboratory (USACERL) designed the Economic Analysis Model for Hazardous Waste Minimization (EAHWM). The EAHWM was designed to allow the user to evaluate the life cycle costs for various techniques used in hazardous waste minimization and to compare them to the life cycle costs of current operating practices. The program was developed in C language on an IBM compatible PC and is consistent with other pertinent models for performing economic analyses. The potential hierarchical minimization categories used in EAHWM include source reduction, recovery and/or reuse, and treatment. Although treatment is no longer an acceptable minimization option, its use is widespread and has therefore been addressed in the model. The model allows for economic analysis for minimization of the Army's six most important hazardous waste streams. These include, solvents, paint stripping wastes, metal plating wastes, industrial waste-sludges, used oils, and batteries and battery electrolytes. The EAHWM also includes a general application which can be used to calculate and compare the life cycle costs for minimization alternatives of any waste stream, hazardous or non-hazardous. The EAHWM has been fully tested and implemented in more than 60 Army installations in the United States

Liquid Metal Transformers

OpenAIRE

Sheng, Lei; Zhang, Jie; Liu, Jing

2014-01-01

The room temperature liquid metal is quickly emerging as an important functional material in a variety of areas like chip cooling, 3D printing or printed electronics etc. With diverse capabilities in electrical, thermal and flowing behaviors, such fluid owns many intriguing properties that had never been anticipated before. Here, we show a group of unconventional phenomena occurring on the liquid metal objects. Through applying electrical field on the liquid metals immersed in water, a series...

Proposed industrial recovered materials utilization targets for the metals and metal-products industry

Energy Technology Data Exchange (ETDEWEB)

None

1979-05-01

The introductory chapter provides a discussion of the factors that affect the recovery and reuse of secondary materials and the competition between the primary and secondary metals industries. It discusses these industries in terms of resource characteristics, industry technology, pollution control requirements, market structure, the economics of recycling, and the issues involved in econometrically estimating scrap supply response behavior. It further presents the methodology established by DOE for the metals, textiles, rubber, and pulp and paper industries. The areas in which government policies might have a significant impact on the utilization of primary and secondary metals and on any recycling targets between now and 1987 are noted. Chapter 3 presents general profiles for the major industrial segments comprising SIC 33. The profiles include such topics as industry structure, process technology, materials and recycling flow, and future trends. Chapter 4 specifically covers the evaluation of recycling targets for the ferrous, aluminum, copper, zinc, and lead industries. (MCW)

Material efficiency: rare and critical metals.

Science.gov (United States)

Ayres, Robert U; Peiró, Laura Talens

2013-03-13

In the last few decades, progress in electronics, especially, has resulted in important new uses for a number of geologically rare metals, some of which were mere curiosities in the past. Most of them are not mined for their own sake (gold, the platinum group metals and the rare Earth elements are exceptions) but are found mainly in the ores of the major industrial metals, such as aluminium, copper, zinc and nickel. We call these major metals 'attractors' and the rare accompanying metals 'hitch-hikers'. The key implication is that rising prices do not necessarily call forth greater output because that would normally require greater output of the attractor metal. We trace the geological relationships and the functional uses of these metals. Some of these metals appear to be irreplaceable in the sense that there are no known substitutes for them in their current functional uses. Recycling is going to be increasingly important, notwithstanding a number of barriers.

Can treatment and disposal costs be reduced through metal recovery?

Science.gov (United States)

Smith, Kathleen S.; Figueroa, Linda; Plumlee, Geoffrey S.

2015-01-01

This paper describes a framework to conduct a “metal-recovery feasibility assessment” for mining influenced water (MIW) and associated treatment sludge. There are multiple considerations in such a determination, including the geologic/geochemical feasibility, market feasibility, technical feasibility, economic feasibility, and administrative feasibility. Each of these considerations needs to be evaluated to determine the practicality of metal recovery from a particular MIW.

Importance of using roller compacted concrete in techno-economic investigation and design of small dams

Science.gov (United States)

Rouissat, Bouchrit; Smail, N.; Zenagui, S.

2017-12-01

In recent years, and under constraints caused by persistent drought, Algeria has launched a new mobilization strategy for surface water resources from small and medium dams. However, by making a review of the studies and achievements of twenty small dams in the west of Algeria, some deficiencies appeared. In addition to reservoir siltation assessment, operation spillways have been the major constraint on the reliability of these types of dams. The objective of this paper is to use the roller compacted concrete (RCC) for small dams' design for the benefit it offers and its ability to incorporate spillways. The development of this reflection was applied to the Khneg Azir earth dam situated in southwest of Algeria. Its uncontrolled lateral spillway has registered significant damage following the flood of October 2005, amounted, at that time, to more than 100 million Algerian dinars (1 million US Dollars). The present research encompasses a technical and economical comparative analysis concerning multiple criteria dam design types coupled with the conjugation of the spillways. Thus, on the basis of financial estimates calculated for all design types, the variant RCC remains competitive with that of the earth dam's spillway isolated (Less than 40% of the cost). To assess the mechanical behavior of the foundations for both types of dams, (earth and RCC dams), numerical modeling has been undertaken, according to the comparative analysis of deformations in the foundations. Analysis of deformations showed that the average foundation deformations was between (0.052-0.85) m for earth dam and (0.023-0.373) m for RCC dam. These economical and technical considerations open up important prospects for the use of RCC in the design of small dams.

Massive production of heavy metals in the Ganga (Hooghly) River estuary, India: Global importance of solute-particle interaction and enhanced metal fluxes to the oceans

Science.gov (United States)

Samanta, Saumik; Dalai, Tarun K.

2018-05-01

The Ganga River System is a major contributor to the global sediment and water discharge to the oceans. The estuary of Ganga (Hooghly) River in India is under increasing influence of anthropogenic contributions via discharge of the industrial and urban effluents. Here we document, based on the investigation of water and suspended sediment samples collected during six periods over two years, that there is extensive production of heavy metals (Co, Ni and Cu) in the estuary such that the annual dissolved fluxes of metals from the Hooghly River are enhanced by up to 230-1770%. Furthermore, the estuarine dissolved metal fluxes, when normalized with water fluxes, are the highest among estuaries of the major rivers in the world. Our simultaneous data on the dissolved, suspended particulate and exchangeable phases allow us to identify the ion-exchange process (coupled adsorption and desorption) as the dominant contributor to the generation of heavy metals in the middle and lower estuary where the estimated anthropogenic contribution is negligible. The estimated contributions from the groundwater are also insufficient to explain the measured metal concentrations in the estuary. A strong positive correlation that is observed between the dissolved heavy metal fluxes and the suspended particulate matter (SPM) fluxes, after normalizing them with the water fluxes, for estuaries of the major global rivers imply that the solute-particle interaction is a globally significant process in the estuarine production of metals. Based on this correlation that is observed for major estuaries around the world, we demonstrate that the South Asian Rivers which supply only ∼9% of the global river water discharge but carry elevated SPM load, contribute a far more significant proportion (∼40 ± 2% Ni and 15 ± 1% Cu) to the global supply of the dissolved metals from the rivers.

Materials mobilized by the French economy from 1990 to 2011: a relative stability disturbed by the economic crisis

International Nuclear Information System (INIS)

Louis, Herve

2013-04-01

While proposing graphs and tables indicating the evolution of material extractions, imports and exports, consumption, and a comparison between material consumption per inhabitant in France and in other European countries and other countries of the World, this document comments the evolution from 1990 to 2011 of various reference values such as Direct Material Input (DMI), Domestic Material Consumption (DMC), Total Material Requirement (TMR), and Total Material Consumption (TMC). Domestic consumption, material extractions, imports and exports are also given for different types of materials (biomass, wood, metals, coal, oil products, and so on). The difference between hidden and apparent fluxes as well as the impact of the economic crisis are highlighted

Behavioral Economics

OpenAIRE

Sendhil Mullainathan; Richard H. Thaler

2000-01-01

Behavioral Economics is the combination of psychology and economics that investigates what happens in markets in which some of the agents display human limitations and complications. We begin with a preliminary question about relevance. Does some combination of market forces, learning and evolution render these human qualities irrelevant? No. Because of limits of arbitrage less than perfect agents survive and influence market outcomes. We then discuss three important ways in which humans devi...

Economic Efficiency of Innovative Materials for Sectors of Economy

Directory of Open Access Journals (Sweden)

Miroshnikova Tatyana

2016-01-01

Full Text Available The paper proposes an approach to the assessment of the economic efficiency of innovative anti-corrosion coatings for sectors of the national economy of the Russia on the basis of a synthesis of strategic sectoral and cost analysis. According to the authors, a comparative analysis of composite polymeric anticorrosion protecting coatings with similar products, estimating of direct and indirect economic effect and prognosis of implementation, forms a deeper understanding of the role of innovative technologies in the Russian state development of import substitution, the investment attractiveness of Russian industries in the new part technologies, applied research activities of private companies. Metal consumption sectors of the economy were chosen as an object of research, as they are characterized by the use of the following products: industrial construction and reconstruction, nuclear and thermal power, chemical, oil and gas, utilities, food processing, automotive, shipbuilding, aviation and rocket science, other industry. Basic modeling of implementation of anticorrosion protecting coatings in industrial enterprises was carried out on the basis of generating energy enterprises as one of the main end-users of anti-corrosive materials that also issue accurate statements.

Transfer and accumulation of metals in a soil-diet-wood mouse food chain along a metal pollution gradient

International Nuclear Information System (INIS)

Rogival, Damien; Scheirs, Jan; Blust, Ronny

2007-01-01

We studied the accumulation and transfer of As, Cd, Cu, Pb and Zn in the compartments of a soil-diet-wood mouse (Apodemus sylvaticus) food chain at five sites located along a metal pollution gradient. We observed a clear gradient in metal exposure at increasing distance from the smelter in all compartments of the food chain for the non-essential metals. The gradient was less clear or absent for the essential metals in acorn and mice target tissues. Regression analysis showed overall strong relationships within the soil-diet and diet-wood mouse compartments for the non-essential metals, while relationships for the essential metals were weak or absent. Total metal in soil appeared as a better predictor for the diet metal content than the available metal fraction. Our results suggest a more important transfer of non-essential elements through the food chain than essential elements, which is probably a consequence of homeostatic control of the latter group. - Non-essential metal transfer through a soil-diet-wood mouse food chain is more important than essential metal transfer

Importance of bio-medical and socio-economic factors for increase of life expectancy

Directory of Open Access Journals (Sweden)

Radivojević Biljana M.

2004-01-01

Full Text Available This paper analyzes the connection between life expectancy according to sex and numerous factors on which its level depends on. Statistical analysis understood application of correlation and regression analysis for determining the connection strength of life expectancy and researched factors separately and then all factors together, as well as separately groups of health-medical and socio-economic factors. The analysis was carried out for a group of developed countries, medium developed, mixed group and Yugoslavia (now SCG on available data for the second half of the 20th century. Analysis results for Yugoslavia showed that the greatest influence on life expectancy of all factors together were setting aside funds for social security (p<0.05. If only health-medical factors are observed, then child mortality up to 5 years and tumor mortality are in question. With women, the greatest influence is with child mortality up to five years old among all factors (importance of certain factors analysis showed that the influence of socio-economic factors on life expectancy was very strong in present conditions of mortality, not only in positive, but in negative direction as well, and that their influence in that second half of the 20th century was greater than the influence of health

Speciation in Metal Toxicity and Metal-Based Therapeutics

Directory of Open Access Journals (Sweden)

Douglas M. Templeton

2015-04-01

Full Text Available Metallic elements, ions and compounds produce varying degrees of toxicity in organisms with which they come into contact. Metal speciation is critical to understanding these adverse effects; the adjectives “heavy” and “toxic” are not helpful in describing the biological properties of individual elements, but detailed chemical structures are. As a broad generalization, the metallic form of an element is inert, and the ionic salts are the species that show more significant bioavailability. Yet the salts and other chelates of a metal ion can give rise to quite different toxicities, as exemplified by a range of carcinogenic potential for various nickel species. Another important distinction comes when a metallic element is organified, increasing its lipophilicity and hence its ability to penetrate the blood brain barrier, as is seen, for example, with organic mercury and tin species. Some metallic elements, such as gold and platinum, are themselves useful therapeutic agents in some forms, while other species of the same element can be toxic, thus focusing attention on species interconversions in evaluating metal-based drugs. The therapeutic use of metal-chelating agents introduces new species of the target metal in vivo, and this can affect not only its desired detoxification, but also introduce a potential for further mechanisms of toxicity. Examples of therapeutic iron chelator species are discussed in this context, as well as the more recent aspects of development of chelation therapy for uranium exposure.

Metals and Neurodegeneration

Science.gov (United States)

Chen, Pan; Miah, Mahfuzur Rahman; Aschner, Michael

2016-01-01

Metals play important roles in the human body, maintaining cell structure and regulating gene expression, neurotransmission, and antioxidant response, to name a few. However, excessive metal accumulation in the nervous system may be toxic, inducing oxidative stress, disrupting mitochondrial function, and impairing the activity of numerous enzymes. Damage caused by metal accumulation may result in permanent injuries, including severe neurological disorders. Epidemiological and clinical studies have shown a strong correlation between aberrant metal exposure and a number of neurological diseases, including Alzheimer’s disease, amyotrophic lateral sclerosis, autism spectrum disorders, Guillain–Barré disease, Gulf War syndrome, Huntington’s disease, multiple sclerosis, Parkinson’s disease, and Wilson’s disease. Here, we briefly survey the literature relating to the role of metals in neurodegeneration. PMID:27006759

Results of chemical decontamination of DOE`s uranium-enrichment scrap metal

Energy Technology Data Exchange (ETDEWEB)

Levesque, R.G.

1997-02-01

The CORPEX{reg_sign} Nuclear Decontamination Processes were used to decontaminate representative scrap metal specimens obtained from the existing scrap metal piles located at the Department of Energy (DOE) Portsmouth Gaseous Diffusion Plant (PORTS), Piketon, Ohio. In September 1995, under contract to Lockheed Martin Energy Systems, MELE Associates, Inc. performed the on-site decontamination demonstration. The decontamination demonstration proved that significant amounts of the existing DOE scrap metal can be decontaminated to levels where the scrap metal could be economically released by DOE for beneficial reuse. This simple and environmentally friendly process can be used as an alternative, or in addition to, smelting radiologically contaminated scrap metal.

Updated reference design of a liquid metal cooled tandem mirror fusion breeder

International Nuclear Information System (INIS)

Berwald, D.H.; Whitley, R.H.; Garner, J.K.

1985-09-01

Detailed studies of key techinical issues for liquid metal cooled fusion breeder (fusion-fission hybrid blankets) have been performed during the period 1983-4. Based upon the results of these studies, the 1982 reference liquid metal cooled tandem mirror fusion breeder blanket design was updated and is described. The updated reference blankets provides increased breeding and lower technological risk in comparison with the original reference blanket. In addition to the blanket design revisions, a plant concept, cost, and fuel cycle economics assessment is provided. The fusion breeder continues to promise an economical source of fissile fuel for the indefinite future

Updated reference design of a liquid metal cooled tandem mirror fusion breeder

Energy Technology Data Exchange (ETDEWEB)

Berwald, D.H.; Whitley, R.H.; Garner, J.K.; Gromada, R.J.; McCarville, T.J.; Moir, R.W.; Lee, J.D.; Bandini, B.R.; Fulton, F.J.; Wong, C.P.C.; Maya, I.; Hoot, C.G.; Schultz, K.R.; Miller, L.G.; Beeston, J.M.; Harris, B.L.; Westman, R.A.; Ghoniem, N.M.; Orient, G.; Wolfer, M.; DeVan, J.H.; Torterelli, P.

1985-09-01

Detailed studies of key techinical issues for liquid metal cooled fusion breeder (fusion-fission hybrid blankets) have been performed during the period 1983-4. Based upon the results of these studies, the 1982 reference liquid metal cooled tandem mirror fusion breeder blanket design was updated and is described. The updated reference blankets provides increased breeding and lower technological risk in comparison with the original reference blanket. In addition to the blanket design revisions, a plant concept, cost, and fuel cycle economics assessment is provided. The fusion breeder continues to promise an economical source of fissile fuel for the indefinite future.

Nutrition economics - characterising the economic and health impact of nutrition.

Science.gov (United States)

Lenoir-Wijnkoop, I; Dapoigny, M; Dubois, D; van Ganse, E; Gutiérrez-Ibarluzea, I; Hutton, J; Jones, P; Mittendorf, T; Poley, M J; Salminen, S; Nuijten, M J C

2011-01-01

There is a new merging of health economics and nutrition disciplines to assess the impact of diet on health and disease prevention and to characterise the health and economic aspects of specific changes in nutritional behaviour and nutrition recommendations. A rationale exists for developing the field of nutrition economics which could offer a better understanding of both nutrition, in the context of having a significant influence on health outcomes, and economics, in order to estimate the absolute and relative monetary impact of health measures. For this purpose, an expert meeting assessed questions aimed at clarifying the scope and identifying the key issues that should be taken into consideration in developing nutrition economics as a discipline that could potentially address important questions. We propose a first multidisciplinary outline for understanding the principles and particular characteristics of this emerging field. We summarise here the concepts and the observations of workshop participants and propose a basic setting for nutrition economics and health outcomes research as a novel discipline to support nutrition, health economics and health policy development in an evidence and health-benefit-based manner.

Assessment of heavy metals in Averrhoa bilimbi and A. carambola fruit samples at two developmental stages.

Science.gov (United States)

Soumya, S L; Nair, Bindu R

2016-05-01

Though the fruits of Averrhoa bilimbi and A. carambola are economically and medicinally important, they remain underutilized. The present study reports heavy metal quantitation in the fruit samples of A. bilimbi and A. carambola (Oxalidaceae), collected at two stages of maturity. Heavy metals are known to interfere with the functioning of vital cellular components. Although toxic, some elements are considered essential for human health, in trace quantities. Heavy metals such as Cr, Mn, Co, Cu, Zn, As, Se, Pb, and Cd were analyzed by atomic absorption spectroscopy (AAS). The samples under investigation included, A. bilimbi unripe (BU) and ripe (BR), A. carambola sour unripe (CSU) and ripe (CSR), and A. carambola sweet unripe (CTU) and ripe (CTR). Heavy metal analysis showed that relatively higher level of heavy metals was present in BR samples compared to the rest of the samples. The highest amount of As and Se were recorded in BU samples while Mn content was highest in CSU samples and Co in CSR. Least amounts of Cr, Zn, Se, Cd, and Pb were noted in CTU while, Mn, Cu, and As were least in CTR. Thus, the sweet types of A. carambola (CTU, CTR) had comparatively lower heavy metal content. There appears to be no reason for concern since different fruit samples of Averrhoa studied presently showed the presence of various heavy metals in trace quantities.

Synthesis of Metal Nanoparticles by Bacteria

Directory of Open Access Journals (Sweden)

Fikriye Alev Akçay

2018-04-01

Full Text Available Metal particles reduced to nano size by nanotechnological methods are confronted in many different fields such as biomedical and physicochemical, pharmaceutical, electric-electronic, automotive and food industries. Nanoparticles can be produced using chemical, physical and biological methods, of which chemical processes are in common use. However, physical and chemical methods are not environmentally friendly and economical because they require the use of high temperature, high pressure and toxic chemicals. For this reason, interest in the production of metal nanoparticles by biological methods, also called green technology, an environmentally friendly and sustainable approach, has increased in recent years. With some plant extracts and intracellular and extracellular secretions of microorganisms, some reduction reactions take place and metal nanoparticles are produced. Bacteria have been actively involved in nanotechnology in recent years due to their diversity in nature, their ease of isolation, and ease of nanoparticle synthesis. In this article, production and application of metal nanoparticles by using bacterial methods have been reviewed.

Modularity and Economic Organization

DEFF Research Database (Denmark)

Sanchez, Ron; Mahoney, Joseph T.

This paper addresses modularity as a basis for organizing economic activity. We first define the key concepts of architecture and of modularity as a special form of architecture. We then suggest how modular systems of all types may exhibit several properties of fundamental importance to the organ......This paper addresses modularity as a basis for organizing economic activity. We first define the key concepts of architecture and of modularity as a special form of architecture. We then suggest how modular systems of all types may exhibit several properties of fundamental importance...... to the organization of economic activities, including greater adaptability and evolvability than systems that lack modular properties. We draw extensively on our original 1996 paper on modularity and subsequent research to suggest broad theoretical implications of modularity for (i) firms' product strategies...... markets. We also discuss an evolutionary perspective on modularity as an emergent phenomenon in firms and industries. We explain how modularity as a relatively new field of strategy and economic research may provide a new theoretical perspective on economic organizing that has significant potential...

Catalytic extraction processing of contaminated scrap metal

International Nuclear Information System (INIS)

Griffin, T.P.; Johnston, J.E.

1994-01-01

The contract was conceived to establish the commercial capability of Catalytic Extraction Processing (CEP) to treat contaminated scrap metal in the DOE inventory. In so doing, Molten Metal Technology, Inc. (MMT), pursued the following objectives: demonstration of the recycling of ferrous and non-ferrous metals--to establish that radioactively contaminated scrap metal can be converted to high-grade, ferrous and non-ferrous alloys which can be reused by DOE or reintroduced into commerce; immobilize radionuclides--that CEP will concentrate the radionuclides in a dense vitreous phase, minimize secondary waste generation and stabilize and reduce waste volume; destroy hazardous organics--that CEP will convert hazardous organics to valuable industrial gases, which can be used as feed gases for chemical synthesis or as an energy source; recovery volatile heavy metals--that CEP's off-gas treatment system will capture volatile heavy metals, such as mercury and lead; and establish that CEP is economical for processing contaminated scrap metal in the DOE inventory--that CEP is a more cost-effective and, complete treatment and recycling technology than competing technologies for processing contaminated scrap. The process and its performance are described

Economic impact of world mining

International Nuclear Information System (INIS)

Walser, G.

2002-01-01

Mining plays a vital role in the economic development of many countries. The emerging economies are now major players in the production and availability of key commodities such as copper (70%), bauxite (40%), iron ore and precious metals. Mining also has a positive impact on the economy of many countries. Another impact of mining can be measured in terms of employment opportunities and income generation. Commercial scale mining provides employment and skills transfer to more than 2 million workers. The multiplier effect increases this benefit by a factor of between 2 and 5. The World Bank Mining Department has carried out an in-depth study on economic and social impact of mining at the community level in Chile, Peru, Bolivia, Papua New Guinea and Mali. This study demonstrates that there are substantial social and economic benefits to the community. The most positive cases are related to the growth of local small- and micro-enterprise activities. However, mining remains controversial, as true sustainable development is not only a matter of financial flows. Mining has also been associated with a number of economic and social problems. As a result there are questions about the sustainability of the economic outcome of mining. The contribution of mining to sustainable development needs to be considered in terms of economic and technical viability, ecological sustainability and social equity. To achieve this, governments, mining companies and local communities must work together to address these issues. (author)

Applying Economics Using Interactive Learning Modules

Science.gov (United States)

Goma, Ophelia D.

2010-01-01

This article describes the use of web-based, interactive learning modules in the principles of economics course. The learning modules introduce students to important, historical economic events while providing real-world application of the economic theory presented in class. Each module is designed to supplement and complement the economic theory…

The Relevance of Metal Recycling for Nuclear Industry Decommissioning Programmes

Energy Technology Data Exchange (ETDEWEB)

O' Sullivan, P.J., E-mail: nea@nea.fr [OECD Nuclear Energy Agency, Paris (France)

2011-07-15

The large amount of scrap metal arising from the decommissioning of nuclear facilities may present significant problems in the event that the facility owners seek to implement a management strategy based largely or fully on disposal in dedicated disposal facilities. Depending on whether disposal facilities currently exist or need to be developed, this option can be very expensive. Also, public reluctance to accept the expansion of existing disposal facilities, or the siting of new ones, mean that the disposal option should be used only after a wide consideration of all available management options. A comparison of health, environmental and socio-economic impacts of the recycling of lightly contaminated scrap metal, as compared with equivalent impacts associated with the production of replacement material, suggests that recycling has significant overall advantages. With present-day technologies, a large proportion of the metal waste from decommissioning can be decontaminated to clearance levels because most of the contamination is on or near the surface of the metal. In purely economic terms, it makes little sense for lightly contaminated scrap metal from decommissioning, which tends to be of high quality, to be removed from the supply chain and replaced with metal from newly-mined ore. In many countries, the metal recycling industry remains reluctant to accept metal from decommissioning. In Germany, the recycling industry and the decommissioning industry have worked together to develop an approach whereby such material is accepted for melting and the recycled material and is then used for certain defined end uses. Sweden also uses dedicated melting facilities for the recycling of metal from the nuclear industry. Following this approach, the needs of the decommissioning industry are being met in a way that also addresses the needs of the recycling industry. (author)

Principles of (Behavioral) Economics

OpenAIRE

David Laibson; John A. List

2015-01-01

Behavioral economics has become an important and integrated component of modern economics. Behavioral economists embrace the core principles of economics—optimization and equilibrium—and seek to develop and extend those ideas to make them more empirically accurate. Behavioral models assume that economic actors try to pick the best feasible option and those actors sometimes make mistakes. Behavioral ideas should be incorporated throughout the first-year undergraduate course. Instructors should...

THE IMPORTANCE OF COLLECTING ECONOMIC AND OTHER GENERAL FACTORS’ INFLUENCE ON THE VALUE OF PUBLIC COMPANIES IN SERBIA

Directory of Open Access Journals (Sweden)

SLOBODAN POPOVIĆ

2016-06-01

Full Text Available To make the right decision in regard to the expression of the value of property, equipment or something else, first for appraiser it is necessary to examine the general economic and other factors that may affect the expression of the value of the company. Especially there is a need to pay attention to devote to the expression value of a public company, because the public companies manage property that stems in part by funds from the budget. This is especially important in the case of a country that aspires to become an EU member. The Republic of Serbia signed the first two chapters with the EU in December 2015. Chapter 32 imperatively requires that the Republic of Serbia begins important application of fair expression of value of the property of public enterprises, because it is a section that requires audit activities of the entire public users, and therefore the company.

Surface modification and functionalization of metal and metal oxide nanoparticles by organic ligands

NARCIS (Netherlands)

Neouze, M.A.; Schubert, U.S.

2008-01-01

Metal or metal oxide nanoparticles possess unique features compared to equivalent larger-scale materials. For applications, it is often necessary to stabilize or functionalize such nanoparticles. Thus, modification of the surface of nanoparticles is an important chemical challenge. In this survey,

REMITTANCES AND ECONOMIC GROWTH IN TURKEY

Directory of Open Access Journals (Sweden)

Huseyin KARAMELIKLI

2015-07-01

Full Text Available Savings are one of the important determinants beyond the theories of economic growth. Therefore remittances and foreign direct investment inflows have importance for the countries having insufficient savings. This study examines the relationship between economic growth, remittances, foreign direct investment inflows and gross domestic savings in Turkey during the period 1974-2013 by using Autoregressive Distributed Lag approach. We found that remittances, foreign direct investment and gross domestic savings had positive impact on economic growth.

The economic security of power plants

Directory of Open Access Journals (Sweden)

Niedziółka Dorota

2017-01-01

Full Text Available Currently, power plants in Poland have to work in a very uncomfortable situation. Unstable market conditions and frequent changes in the law may have serious adverse consequences for their economic security. Power plants play a very important role in the economy. The effectiveness of their performance affects the activity of all other businesses. Therefore, it is very important to provide a definition of economic security for the power plants’ sector and the factors determining its level. Maintaining economic security will allow energy generation companies to grow in a sustainable way as well as limit operational risk. A precise definition can also be used to create analytical tools for economic security measurement and monitoring. Proper usage of such tools can help energy generation companies sustain their economic security and properly plan their capital expenditures. The article focuses on the definition of economic security in the “micro” context of a separate business unit (enterprise. We also present an analytical model that measures economic security of a company engaged in the production of energy - a company of strategic importance for the national economy. The model uses macroeconomic variables, variables describing prices of raw material and legal / political stability in the country, as well as selected financial indicators. The appliance of conclusions resulting from the model’s implementation will help provide economic security for companies generating energy.

Economic and social importance of dam reservoirs – a study of the Soła River cascade

Directory of Open Access Journals (Sweden)

Andrzej Jaguś

2018-02-01

Full Text Available The paper is devoted to the functions of dam reservoirs in terms of their socioeconomic usefulness. Three dam reservoirs of the Soła cascade were chosen (Tresna, Porąbka, Czaniec as the example that are located in the southern part of Silesian Provence. The cascade is an integrated retention system, but particular reservoirs have different functions. The role of reservoirs in flood protection (Tresna, Porąbka, drinking water supply (Czaniec, electricity production (Porąbka/Porąbka-Żar, recreation (Porąbka, Tresna, supply of rock aggregate (Tresna was depicted as well. The high importance of the cascade for economic development of the region was demonstrated. Finally, the controversies about the construction and utility of dam reservoirs were discussed.

Economic bid evaluation

International Nuclear Information System (INIS)

Bode, T.

1975-01-01

When it is intended to install a new nuclear power station, the usual procedure is to invite for tenders. In due course, bids will be received from various manufacturers, out of which the most favourable one is then to be selected. Appraisal is concluded in the Economic Bid Evaluation, the purpose of which is to define the economically most favourable bid by comparing overall costs and benefits of the various alternatives. Thus, Economic Bid Evaluation is a most important instrument for deciding on award of contract. (orig.) [de

BEHAVIORAL ECONOMICS AND THE NEED OF PSYCHOLOGY IN ECONOMIC RESEARCH

Directory of Open Access Journals (Sweden)

Andreea GRADINARU

2014-06-01

Full Text Available The turning point in economic science has now come, marked especially by triggering the biggest crisis since the Great Depression of '29-'33, has called into question the need to reconsider the status of economic science and finding ways in which it can increase its practical foundations. In the elaboration of this study I’ve took into account the fact that beyond any abstract, formal and mathematical model, economics is a science, having the man in its center. Furthermore, every economic process is based on the human being. But the way individuals behave does not follow precisely the pattern predicted by classical and neoclassical models, but most of the time they are making decisions under the influence of psychological factors. Starting from these assumptions I considered important to highlight a real need for psychology in economic research. Therefore, the aim of this work is exclusively theoretical meant to show that the study of psychological factors is necessary in economic research, because it allows a better explanation of the economic problems and lead to obtaining results closer to reality than those who only take into consideration economic factors. In this way I appealed to behavioral economics. This represents a new trend of economic thinking that reunites psychology with economy. The thing that I observed after finishing the study is that behavioral economics can increase the explanatory power of economics by providing more realistic psychological bases, because human behavior is not only the subject matter of economics but psychology too.

Adlayer Core-Level Shifts of Random Metal Overlayers on Transition-Metal Substrates

DEFF Research Database (Denmark)

Ganduglia-Pirovano, M. V.; Kudrnovský, J.; Scheffler, M.

1997-01-01

and the screening effects induced by the core hole, and study the influence of the alloy composition for a number of noble metal-transition metal systems. Our analysis clearly indicates the importance of final-state screening effects for the interpretation of measured core-level shifts. Calculated deviations from...

Metal pollution in a contaminated bay: Relationship between metal geochemical fractionation in sediments and accumulation in a polychaete

International Nuclear Information System (INIS)

Fan, Wenhong; Xu, Zhizhen; Wang, Wen-Xiong

2014-01-01

Jinzhou Bay in Northern China has been seriously contaminated with metals due to the impacts of smelting activities. In this study, we investigated the relationship between metal accumulation in a deposit-feeding polychaete Neanthes japonica and metal concentration and geochemical fractionation (Cd, Cu, Pb, Zn and Ni) in sediments of Jinzhou Bay. Compared with the historical data, metals in the more mobile geochemical fraction (exchangeable and carbonate fractions) were gradually partitioned into the more stable fraction (Fe–Mn oxides) over time. Metal concentration and geochemical fractionation in sediment significantly affected metal bioavailability and accumulation in polychaetes, except for Ni. Metal accumulation in polychaetes was significantly influenced by Fe or Mn content, and to a lesser degree by organic matter. Prediction of metal bioaccumulation in polychaetes was greatly improved by normalizing metal concentrations to Mn content in sediment. The geochemical fractionation of metals in sediments including the exchangeable, organic matter and Fe–Mn oxides were important in controlling the sediment metal bioavailability to polychaetes. - Highlights: • Metals in contaminated sediments gradually partitioned into the more stable phase over time. • Metal accumulation in polychaetes was more significantly influenced by Fe/Mn content than by organic matter. • Prediction of metal bioaccumulation greatly improved by normalizing metals to Mn content in sediment. • Metals in exchangeable, organic matter and Fe–Mn oxides were important in controlling their bioavailability. - Prediction of metal bioaccumulation in polychaetes was significantly improved by normalizing metal concentrations to Mn content in sediment

Application of nuclear analytical methods to heavy metal pollution studies of estuaries

International Nuclear Information System (INIS)

Anders, B.; Junge, W.; Knoth, J.; Michaelis, W.; Pepelnik, R.; Schwenke, H.

1984-01-01

Important objectives of heavy metal pollution studies of estuaries are the understanding of the transport phenomena in these complex ecosystems and the discovery of the pollution history and the geochemical background. Such studies require high precision and accuracy of the analytical methods. Moreover, pronounced spatial heterogeneities and temporal variabilities that are typical for estuaries necessitate the analysis of a great number of samples if relevant results are to be obtained. Both requirements can economically be fulfilled by a proper combination of analytical methods. Applications of energy-dispersive X-ray fluorescence analysis with total reflection of the exciting beam at the sample support and of neutron activation analysis with both thermal and fast neutrons are reported in the light of pollution studies performed in the Lower Elbe River. Profiles are presented for the total heavy metal content determined from particulate matter and sediment. They include V, Mn, Fe, Ni, Cu, Zn, As, Pb, and Cd. 16 references 10 figures, 1 table

The mineral base and productive capacities of metals and non-metals of Kosovo

Science.gov (United States)

Rizaj, M.; Beqiri, E.; McBow, I.; O'Brien, E. Z.; Kongoli, F.

2008-08-01

All historical periods of Kosovo—Ilirik, Roman, Medieval, Turkish, and former Yugoslavian—are linked with the intensive development of mining and metallurgy. This activity influenced and still is influencing the overall position of Kosovo as a country. For example, according to a 2006 World Bank report as well as other studies, Kosovo has potential lignite resources (geological reserves) of about 1.5 billion tonnes, which are ranked fifth in the world in importance. Other significant Kosovan mineral resources include lead, zinc, gold, silver, bauxite, and uranium, and rare metals accompanying those minerals, including indium, cadmium, thallium, gallium, and bismuth. These rare metals are of particular importance in developing advanced industrial technologies. Kosovo also has reserves of high-quality non-metals, including magnesite, quartz grit, bentonite, argil, talc, and asbestos. No database exists for these non-metal reserves, and further research and studies are needed.

About the Distribution of Metal Objects in Prepalatial Crete

Directory of Open Access Journals (Sweden)

Borja Legarra Herrero

2004-11-01

Full Text Available Although metal objects have been used as evidence in different interpretations of the socioeconomic changes identified in Prepalatial Crete (c.3100-1900 BC, they constitute an understudied category of material. This paper argues that metal objects on Crete were subject to complex processes regarding the creation of meaning; a more comprehensive appraisal of metal objects on the island may cast new light on these issues. Copper-based, gold, lead and silver objects are investigated from their ore extraction locations outside Crete to their final deposition, linking the different steps of the process of creating an artefact with different layers of meanings for the metal and, subsequently, for the finished objects. This study evaluates differences in the use of metals, with a particular focus on their intra-island depositional patterns. It seeks to identify differences in the roles of metals within Cretan communities as well as regional fashions in the use of metal objects. It is suggested that metals had different characters since their depositional patterns vary, and that people consciously chose certain metals to make specific objects and also used metal objects in different ways, reflecting the socio-economic context for each region.

Application of radiation and radioisotopes for the management of insect pests of economic importance

International Nuclear Information System (INIS)

Dongre, T.K.

2001-01-01

This article gives brief account of radiation and radioisotope applications in the field of insect pest management. Radiation has a direct application in controlling insect pests, through sterile insect techniques (SIT) and radiation disinfestations of food grains, whereas radioisotopes can be used in basic as well as applied studies in the field of insect physiology, ecology and metabolism. The successful implementation of SIT against New world screwworm fly and different fruit fly species has clearly demonstrated the usefulness of radiation in agriculture. Over the past 35 years, the joint FAO/IAEA committee has played a critical role in supporting member states in the development and application of SIT for the management of various economically important insect pests. BARC has developed SIT for the management of red palm weevil, Rhynchophorus ferrugineus Oliv, the most serious pest of coconut in India and date palms in Arabian countries. Now, through thematic BRNS project this technique is being evaluated under field conditions in collaboration with three Indian agricultural universities. Present status and future prospects of sterile insect technique for the area wide control of different insect species will be discussed in detail. (author)

Estimating North Dakota's Economic Base

OpenAIRE

Coon, Randal C.; Leistritz, F. Larry

2009-01-01

North Dakota’s economic base is comprised of those activities producing a product paid for by nonresidents, or products exported from the state. North Dakota’s economic base activities include agriculture, mining, manufacturing, tourism, and federal government payments for construction and to individuals. Development of the North Dakota economic base data is important because it provides the information to quantify the state’s economic growth, and it creates the final demand sectors for the N...

Micropropagation of Cyclopia genistoides, an endemic South African plant of economic importance.

Science.gov (United States)

Kokotkiewicz, Adam; Luczkiewicz, Maria; Hering, Anna; Ochocka, Renata; Gorynski, Krzysztof; Bucinski, Adam; Sowinski, Pawel

2012-01-01

An efficient micropropagation protocol of Cyclopia genistoides (L.) Vent., an indigenous South African shrub of economic importance, was established. In vitro shoot cultures were obtained from shoot tip fragments of sterile seedlings cultured on solid Schenk and Hildebrandt (SH) medium supplemented with 9.84 microM 6-(gamma,gamma-dimethylallylamino)purine (2iP) and 1.0 microM thidiazuron (TDZ). Maximum shoot multiplication rate [(8.2 +/- 1.3) microshoots/explant)] was observed on this medium composition. Prior to rooting, the multiplied shoots were elongated for 60 days (two 30-days passages) on SH medium with one-half sucrose concentration, supplemented with 4.92 microM indole-3-butyric acid (IBA). The rooting of explants was only possible in the case of the elongated shoots. The highest root induction rate (54.8%) was achieved on solid SH medium with one-half sucrose and one-half potassium nitrate and ammonium nitrate concentration, respectively, supplemented with 28.54 microM indole-3-acetic acid (IAA) and 260.25 microM citric acid. The plantlets were acclimatized for 30 days in the glasshouse, with the use of peat/gravel/perlite substrate (1:1:1). The highest acclimatization rate (80%) was obtained for explants rooted with the use of IAA-supplemented medium. The phytochemical profile of the regenerated plants was similar to that of the reference intact plant material. HPLC analyses showed that C. genistoides plantlets obtained by the micropropagation procedure kept the ability to produce xanthones (mangiferin and isomangiferin) and the flavanone hesperidin, characteristic of wild-growing shrubs.

Environment-friendly approach for the removal of toxic metals

International Nuclear Information System (INIS)

Zahra, N.; Mehmood, F.; Sheikh, S.T.; Javed, K.; Amin, A.

2006-01-01

Water pollution is serious economical problem and the presence of toxic metals like lead causes contamination of plants and then through nutritional chain it affects the health of humans and animals. This research work describes the removal of lead from wastewater using natural bentonites taken from various areas of Pakistan. The batch adsorption process was applied to remove this toxic metal. The quantities of lead metal before and after the treatment of standard solutions with different samples of bentonite were determined by atomic absorption spectroscopic method. The studies were carried out at room temperature, pH 7 and -200 mesh particle size using 50 ml of metal solutions. The time taken to maintain equilibrium was one hour. Then percentage adsorption was estimated on bentonite samples. (author)

The importance of foreign direct investments in Sumadija and Pomoravlje region

Directory of Open Access Journals (Sweden)

Đorđević Ivan

2015-01-01

Full Text Available The terms of foreign investment and foreign direct investments are very often terms in foreign economics policy because they represent one of the key issues in foreign economics and practice. The relationship between investments and economic growth is the key question in the modern economic theory. Foreign direct investments are representing the most common shape of international capital movement wich are including the long term connections between more differents countries, regions. The Sumadija and Pomoravlje Region is located in the central Part of Serbia. This Region is the heart of Serbia. Economic development of this part of Serbia is important for the economic development of the whole Serbia as a country. It is very important for the longrange economic growth to define strategy for economic growth for the region of Sumadija and Pomoravlje. In this strategy we will determine the most important tasks and objectives of economic growth also the incentives in the ten year period to come. In the transition country which is Serbia with huge regional and economical problems, without its own funds it is important to attract foreign investment, first of all direct investment. Foreign direct investment which are the basics of all investments in Serbia especially in Shumadija and Pomoravlje region.

Metallurgy - steel and non-ferrous metals

International Nuclear Information System (INIS)

Wusatowski, R.

1999-01-01

Several actual problems of metallurgy and processing of the chief metals and their alloys, especially of steel, copper, zinc and aluminium were discussed. The thought was given to the problems of: scientific, technical (also the energy consumption of production, the evolution of technology), organizational, economical, even political nature (influence of the state on the development of industry). (author)

Contaminated metallic melt volume reduction testing

International Nuclear Information System (INIS)

Deichman, J.L.

1981-01-01

Laboratory scale metallic melts (stainless steel) were accomplished in support of Decontamination and Decommissioning's (D and D) contaminated equipment volume reduction and Low-Level Lead Site Waste programs. Six laboratory scale melts made with contaminated stainless steel provided data that radionuclide distribution can be predicted when proper temperature rates and ranges are employed, and that major decontamination occurs with the use of designed slagging materials. Stainless steel bars were contaminated with plutonium, cobalt, cesium and europium. This study was limited to stainless steel, however, further study is desirable to establish data for other metals and alloys. This study represents a positive beginning in defining the feasibility of economical volume reduction or conversion from TRU waste forms to LLW forms for a large portion of approximately 50 thousand tons of contaminated metal waste now being stored at Hanford underground or in deactivated facilities

Nanotoxicology of Metal Oxide Nanoparticles

Directory of Open Access Journals (Sweden)

Amedea B. Seabra

2015-06-01

Full Text Available This review discusses recent advances in the synthesis, characterization and toxicity of metal oxide nanoparticles obtained mainly through biogenic (green processes. The in vitro and in vivo toxicities of these oxides are discussed including a consideration of the factors important for safe use of these nanomaterials. The toxicities of different metal oxide nanoparticles are compared. The importance of biogenic synthesized metal oxide nanoparticles has been increasing in recent years; however, more studies aimed at better characterizing the potent toxicity of these nanoparticles are still necessary for nanosafely considerations and environmental perspectives. In this context, this review aims to inspire new research in the design of green approaches to obtain metal oxide nanoparticles for biomedical and technological applications and to highlight the critical need to fully investigate the nanotoxicity of these particles.

Economic assessment of flash co-pyrolysis of short rotation coppice and biopolymer waste streams

OpenAIRE

KUPPENS, Tom; CORNELISSEN, Tom; CARLEER, Robert; YPERMAN, Jan; SCHREURS, Sonja; JANS, Maarten; THEWYS, Theo

2010-01-01

The disposal problem associated with phytoextraction of farmland polluted with heavy metals by means of willow requires a biomass conversion technique which meets both ecological and economical needs. Combustion and gasification of willow require special and costly flue gas treatment to avoid re-emission of the metals in the atmosphere, whereas flash pyrolysis mainly results in the production of (almost) metal free bio-oil with a relatively high water content. Flash co-pyrolysis of biomass an...

Fixed-base recycling of contaminated metals in the commercial market

International Nuclear Information System (INIS)

Loiselle, V.

1993-01-01

Since the establishment of the first fixed-base commercial decontamination facility in 1982, commercial processors have cleaned and recycled more than 120 million lb of metals for productive reuse. This represents enough metal to duplicate the Eiffel Tower eight times. This paper examines the economic conditions that led to the foundation of this industry and the types of decontamination technology that have been successfully employed by the processors

Environmentally Sustainable Economic Growth

Directory of Open Access Journals (Sweden)

Stelian Brad

2016-05-01

Full Text Available Economic growth and sustainable development are important issues for social prosperity. Sustainable development strives for moderate and responsible use within the economic activity of the limited resources of our planet, whereas economic growth does not limit the resource exploitation and energy, being mainly focused on productivity increase. From this perspective, both conceptual and operational contradictions occur between the two pillars of prosperity. This paper looks to these contradictions and proposes some streams of intervention such as economic growth and environmental sustainability to operate in harmony. A structured framework for innovative problem solving is considered in this respect. Results of this research show that it is possible to induce smart measures in the economic system for directing businesses towards new paradigms where economic growth is possible without negative effects on environmental sustainability.

Incorporation of metal bioavailability into regulatory frameworks-metal exposure in water and sediment

Energy Technology Data Exchange (ETDEWEB)

Ahlf, Wolfgang [Inst. of Environmental Tech. and Energy Economics, TUHH, Hamburg (Germany); Drost, Wiebke [Umweltpruefung Chemikalien IV, Umweltbundesamt, Dessau (Germany); Heise, Susanne [Dept. of Life Sciences, HAW, Hamburg (Germany)

2009-10-15

Background, aim, and scope The cause for this position paper is the impression that risk assessors consider primarily the concentration of free metal ions dissolved in solution controlling metal bioavailability in aquatic systems. Aiming at a more realistic risk assessment of metals, bioavailability has to be discussed under the scope of main uptake routes of metals to organisms. Materials and methods On the basis of a review on the literature relating to bioavailability approaches, this work discusses the incorporation of metal bioavailability into the risk assessment of metals in the context of metal exposure. Results The biotic ligand model (BLM) and the concept of sulfide bound metals described by the ratio of simultaneously extracted metals and acid volatile sulfide concept (AVS) have been developed to consider the bioavailability of metals. Both approaches assume that the free ion concentration is the most relevant exposure pathway. However, apart from geochemical conditions, which control free metal concentration, bioavailability is additionally a result of contaminant/particle interaction and of organisms' activity. Asking for the relevant exposure pathways for inorganic metals to organisms, the compartments' water and sediment have been evaluated and also the importance of contaminated food. (orig.)

Identification and conservation of important plant areas (IPAS) for the distribution of medicinal, aromatic and economic plants in the Hindukush-Himalaya mountain range

International Nuclear Information System (INIS)

Sher, H.; Ali, H.; Rehman, S.

2012-01-01

Study on the identification of Important Plant Areas (IPAs) was conducted in seven valleys of Hindukush-Himalayas mountainous ranges of Pakistan during 2005 and 2006. The principal aim of the study is to search new avenues for the conservation and sustainable utilization of threatened medicinal and economic plants and their habitats in IPAs. IPAs are sites of tremendous ecological and economic values that still exist in the world and are being managed on specific sites to study wild plant diversity. Several of such plants are used in the traditional medicines that are being used since the dawn of history to provide basic healthcare to people the world over. According to WHO, 80% of the human population of Africa still use medicinal plants in their primary healthcare. The popularity of herbal drugs is on the constant rise in many developed countries of the world, while in developing countries like Pakistan; medicinal plants contribute significantly to the income sources of people living in remote areas. Keeping such importance in view, the World Health Organization (WHO) launched a global vision in the form of 'Global Strategy for Plant Conservation' having various targets and mile stones. Target 5 of the strategy required for the global integration of the herbal medicine in health care system with proper identification of medicinal plants and the conservation of sites where such plants are found naturally, as its basic elements. In order to contribute to the specified target, WHO advised the relevant institutions to develop research plans and conservation programmes that are focused on the Global strategy in general and target 5 in specific. While complementing the appeal and contributing to its vision, a study was conducted in various eco-systems of the Pakistan's Hindukush-Himalayas region, identifying Important Plant Areas (IPAs) for their subsequent conservation and uses for scientific purposes. Site selection for the study was based on: 1). Exceptional

Multidrug-Resistance and Toxic Metal Tolerance of Medically Important Bacteria Isolated from an Aquaculture System

Science.gov (United States)

Resende, Juliana Alves; Silva, Vânia L.; Fontes, Cláudia Oliveira; Souza-Filho, Job Alves; de Oliveira, Tamara Lopes Rocha; Coelho, Cíntia Marques; César, Dionéia Evangelista; Diniz, Cláudio Galuppo

2012-01-01

The use of antimicrobials and toxic metals should be considered carefully in aquaculture and surrounding environments. We aimed to evaluate medically relevant bacteria in an aquaculture system and their susceptibility to antimicrobials and toxic metals. Selective cultures for enterobacteria (ENT), non-fermenting Gram-negative rods (NFR) and Gram-positive cocci (GPC) were obtained from water samples collected in two different year seasons. The isolated bacteria were biochemically identified and antimicrobial and toxic metal susceptibility patterns were determined. Overall, 407 representative strains were recovered. In general, bacteria isolated from fish ponds showed higher multiple antibiotic resistance indices when compared to those isolated from a water-fed canal. Resistance to penicillin and azithromycin was observed more frequently in the GPC group, whereas resistance to ampicillin and ampicillin/sulbactam or gentamicin was observed more frequently in the ENT and NFR groups, respectively. All the isolated bacteria were tolerant to nickel, zinc, chromium and copper at high levels (≥1,024 μg mL−1), whereas tolerance to cadmium and mercury varied among the isolated bacteria (2–1,024 μg mL−1). Multidrug-resistant bacteria were more frequent and diverse in fish ponds than in the water-fed canal. A positive correlation was observed between antimicrobial resistance and metal tolerance. The data point out the need for water treatment associated with the aquaculture system. PMID:22972388

Heavy metal pollution in coastal areas of South China: a review.

Science.gov (United States)

Wang, Shuai-Long; Xu, Xiang-Rong; Sun, Yu-Xin; Liu, Jin-Ling; Li, Hua-Bin

2013-11-15

Coastal areas of South China face great challenges due to heavy metal contamination caused by rapid urbanization and industrialization. In this paper, more than 90 articles on levels, distributions, and sources of heavy metals in sediments and organisms were collected to review the status of heavy metal pollution along coastal regions of South China. The results show that heavy metal levels were closely associated with local economic development. Hong Kong and the Pearl River Estuary were severely contaminated by heavy metals. However, concentrations of heavy metals in sediments from Hong Kong have continually decreased since the early 1990 s. High levels of heavy metals were found in biota from Lingdingyang in Guangdong province. Mollusks had higher concentrations of heavy metals than other species. Human health risk assessments suggested that levels of heavy metals in some seafood from coastal areas of South China exceeded the safety limit. Copyright © 2013 Elsevier Ltd. All rights reserved.

WINCO Metal Recycle annual report, FY 1993

International Nuclear Information System (INIS)

Bechtold, T.E.

1993-12-01

This report is a summary of the first year progress of the WINCO Metal Recycle Program. Efforts were directed towards assessment of radioactive scrap metal inventories, economics and concepts for recycling, technology development, and transfer of technology to the private sector. Seven DOE laboratories worked together to develop a means for characterizing scrap metal. Radioactive scrap metal generation rates were established for several of these laboratories. Initial cost estimates indicate that recycle may be preferable over burial if sufficient decontamination factors can be achieved during melt refining. Radiation levels of resulting ingots must be minimized in order to keep fabrication costs low. Industry has much of the expertise and capability to execute the recycling of radioactive scrap metal. While no single company can sort, melt, refine, roll and fabricate, a combination of two to three can complete this operation. The one process which requires development is in melt refining for removal of radionuclides other than uranium. WINCO is developing this capability in conjunction with academia and industry. This work will continue into FY-94

WINCO Metal Recycle annual report, FY 1993

Energy Technology Data Exchange (ETDEWEB)

Bechtold, T.E. [ed.

1993-12-01

This report is a summary of the first year progress of the WINCO Metal Recycle Program. Efforts were directed towards assessment of radioactive scrap metal inventories, economics and concepts for recycling, technology development, and transfer of technology to the private sector. Seven DOE laboratories worked together to develop a means for characterizing scrap metal. Radioactive scrap metal generation rates were established for several of these laboratories. Initial cost estimates indicate that recycle may be preferable over burial if sufficient decontamination factors can be achieved during melt refining. Radiation levels of resulting ingots must be minimized in order to keep fabrication costs low. Industry has much of the expertise and capability to execute the recycling of radioactive scrap metal. While no single company can sort, melt, refine, roll and fabricate, a combination of two to three can complete this operation. The one process which requires development is in melt refining for removal of radionuclides other than uranium. WINCO is developing this capability in conjunction with academia and industry. This work will continue into FY-94.

Socio-economic Status Plays Important Roles in Childhood Cancer Treatment Outcome in Indonesia

NARCIS (Netherlands)

Mostert, S.; Gunawan, S.; Wolters, E.; van de Ven, P.M.; Sitaresmi, M.N.; van Dongen, J.; Veerman, A.J.P.; Mantik, M.F.J.; Kaspers, G.J.L.

2012-01-01

Background: The influence of parental socio-economic status on childhood cancer treatment outcome in low-income countries has not been sufficiently investigated. Our study examined this influence and explored parental experiences during cancer treatment of their children in an Indonesian academic

Essays in antitrust economics

NARCIS (Netherlands)

Verouden, V.C.H.M.

2001-01-01

Competition law - or antitrust law, as it is called in the United States - is a field of law to which economic concepts, such as "restriction of competition" and "anti-competitive effect", are of central importance. This thesis analyses a number of such concepts, both from an economic and a legal

Integrating remediation and resource recovery: On the economic conditions of landfill mining

International Nuclear Information System (INIS)

Frändegård, Per; Krook, Joakim; Svensson, Niclas

2015-01-01

Highlights: • We compare two remediation scenarios; one with resource recovery and one without. • Economic analysis includes relevant direct costs and revenues for the landfill owner. • High degrees of metal and/or combustible contents are important economic factors. • Landfill tax and the access to a CHP can have a large impact on the result. • Combining landfill mining and remediation may decrease the project cost. - Abstract: This article analyzes the economic potential of integrating material separation and resource recovery into a landfill remediation project, and discusses the result and the largest impact factors. The analysis is done using a direct costs/revenues approach and the stochastic uncertainties are handled using Monte Carlo simulation. Two remediation scenarios are applied to a hypothetical landfill. One scenario includes only remediation, while the second scenario adds resource recovery to the remediation project. Moreover, the second scenario is divided into two cases, case A and B. In case A, the landfill tax needs to be paid for re-deposited material and the landfill holder does not own a combined heat and power plant (CHP), which leads to disposal costs in the form of gate fees. In case B, the landfill tax is waived on the re-deposited material and the landfill holder owns its own CHP. Results show that the remediation project in the first scenario costs about €23/ton. Adding resource recovery as in case A worsens the result to −€36/ton, while for case B the result improves to −€14/ton. This shows the importance of landfill tax and the access to a CHP. Other important factors for the result are the material composition in the landfill, the efficiency of the separation technology used, and the price of the saleable material

Integrating remediation and resource recovery: On the economic conditions of landfill mining

Energy Technology Data Exchange (ETDEWEB)

Frändegård, Per, E-mail: per.frandegard@liu.se; Krook, Joakim; Svensson, Niclas

2015-08-15

Highlights: • We compare two remediation scenarios; one with resource recovery and one without. • Economic analysis includes relevant direct costs and revenues for the landfill owner. • High degrees of metal and/or combustible contents are important economic factors. • Landfill tax and the access to a CHP can have a large impact on the result. • Combining landfill mining and remediation may decrease the project cost. - Abstract: This article analyzes the economic potential of integrating material separation and resource recovery into a landfill remediation project, and discusses the result and the largest impact factors. The analysis is done using a direct costs/revenues approach and the stochastic uncertainties are handled using Monte Carlo simulation. Two remediation scenarios are applied to a hypothetical landfill. One scenario includes only remediation, while the second scenario adds resource recovery to the remediation project. Moreover, the second scenario is divided into two cases, case A and B. In case A, the landfill tax needs to be paid for re-deposited material and the landfill holder does not own a combined heat and power plant (CHP), which leads to disposal costs in the form of gate fees. In case B, the landfill tax is waived on the re-deposited material and the landfill holder owns its own CHP. Results show that the remediation project in the first scenario costs about €23/ton. Adding resource recovery as in case A worsens the result to −€36/ton, while for case B the result improves to −€14/ton. This shows the importance of landfill tax and the access to a CHP. Other important factors for the result are the material composition in the landfill, the efficiency of the separation technology used, and the price of the saleable material.

Laser processing of metals and alloys

International Nuclear Information System (INIS)

Goswami, G.L.; Kumar, Dilip; Roy, P.R.

1988-01-01

Laser, due to its high degree of coherence can produce powder density in the range of 10 3 -10 11 W/mm 2 . This high power density of the laser beam enables it to be utilized for many industrial applications, e.g. welding, cutting, drilling, surface treatment, etc. Laser processing of materials has many advantages, e.g. good quality product at high processing speed, least heat affected zone, minimum distortion, etc. In addition, the same laser system can be utilized for different applications, a very cost effective factor for any industry. Therefore laser has been adopted for processing of different materials for a wide range of applications and is now replacing conventional materials processing techniques on commercial merits with several economic and metallurgical advantages. Applications of laser to process materials of different thicknesses varying from 0.1 mm to 100 mm have demonstrat ed its capability as an important manufacturing tool for engineering industries. While lasers have most widely been utilized in welding, cutting and drilling they have also found applications in surface treatment of metals and alloys, e.g. transfor mation hardening and annealing. More recently, there has been significant amount of research being undertaken in laser glazing, laser surface alloying and laser cladding for obtaining improved surface properties. This report reviews the stat us of laser processing of metals and alloys emphasising its metallurgical aspects a nd deals with the different laser processes like welding, cutting, drilling and surface treatment highlighting the types and choice of laser and its interaction with metals and alloys and the applications of these processes. (author). 93 refs., 32 figs., 7 tables

Rapid, Selective Heavy Metal Removal from Water by a Metal-Organic Framework/Polydopamine Composite.

Science.gov (United States)

Sun, Daniel T; Peng, Li; Reeder, Washington S; Moosavi, Seyed Mohamad; Tiana, Davide; Britt, David K; Oveisi, Emad; Queen, Wendy L

2018-03-28

Drinking water contamination with heavy metals, particularly lead, is a persistent problem worldwide with grave public health consequences. Existing purification methods often cannot address this problem quickly and economically. Here we report a cheap, water stable metal-organic framework/polymer composite, Fe-BTC/PDA, that exhibits rapid, selective removal of large quantities of heavy metals, such as Pb 2+ and Hg 2+ , from real world water samples. In this work, Fe-BTC is treated with dopamine, which undergoes a spontaneous polymerization to polydopamine (PDA) within its pores via the Fe 3+ open metal sites. The PDA, pinned on the internal MOF surface, gains extrinsic porosity, resulting in a composite that binds up to 1634 mg of Hg 2+ and 394 mg of Pb 2+ per gram of composite and removes more than 99.8% of these ions from a 1 ppm solution, yielding drinkable levels in seconds. Further, the composite properties are well-maintained in river and seawater samples spiked with only trace amounts of lead, illustrating unprecedented selectivity. Remarkably, no significant uptake of competing metal ions is observed even when interferents, such as Na + , are present at concentrations up to 14 000 times that of Pb 2+ . The material is further shown to be resistant to fouling when tested in high concentrations of common organic interferents, like humic acid, and is fully regenerable over many cycles.

Essays in health economics and labor economics

NARCIS (Netherlands)

Palali, Ali

2015-01-01

The economics literature presents a growing number of studies focusing on risky health behaviors such as tobacco use or cannabis use. One of the most important characteristics of these risky health behaviors is that they harm the users and the people around the users, causing great social and

Purposeful engineering economics

CERN Document Server

Chadderton, Ronald A

2015-01-01

This textbook/course supplement stands as a unique and highly original complement to the traditional engineering economics curriculum. Its primarily narrative approach conveys the essence of an “Austrian" economic perspective on cash flow analysis and decision making in engineering, without extensive tables and graphs, and requires very little mathematics. The book’s objective is to add a new perspective to the usual study of cash flow analysis and solely econometric engineering decision making. The author draws on the methodology of the Austrian Economists—a school of economic thought that bases its study of economic phenomena on the interpretation and analysis of the purposeful actions of individuals. The book includes an array of illustrative case studies examined in detail by the author and emphasizes the importance of market processes and price signals to coordinate engineering plans. Purposeful Engineering Economics is an ideal resource for students, teaching faculty, and practicing professional ...

Theories of International Economic Development (Case Study: Economic Development in Kosovo

Directory of Open Access Journals (Sweden)

MSc. Bardhok Bashota

2012-06-01

Full Text Available Karl Popper rightly says that “real starting point for each research is set based on assumptions of reality, not only based on the real facts”. The text below was prepared In accordance with this logic, where the Theories of International Development are treated especially focusing on International Economic Development. Therefore, theoretical reflections present assumption side, and study of many empirically measured data will correspond with real facts, because with ought these facts assumption would be useless. Technically this writing consists of two parts: in the first part are elaborated all theoretical and practical characteristics of overall international development, while in a second part as a case study will be Economic Development i Kosovo. From methodological point of view this is a comparative study and based on statistical data, while problem treating approach is critical and explanatory. As it will be understood later, development theories have been decisively influenced by economic thinking, and the focus on this dimension responds best to the nature of the term development. On the other hand the fact of unfolding economical development will reflect interference and the nature of it’s inter politics. Today economic development becomes a worldwide goal, having a considerable place in most of the literature with economic content. Also, here are presented as well examples from different practices that reflect economic development in different periods and places. Here is presented international economic development starting with a brief description of a genealogy of this development and ways of economic development back that time. It is of a special importance elaboration through theoretical approach on the creation of capital and economic development, as  mercantilist theory, classic and neo classic theory, than capitalization and Socialism-Marxism. To better understand the nature of economic development, the focus falls on

Reviewing metallic PEMFC bipolar plates

Energy Technology Data Exchange (ETDEWEB)

Wang, H.; Turner, J.A. [National Renewable Energy Laboratory, Golden, CO (United States)

2010-08-15

A bipolar plate is one of the most important components in a polymer exchange membrane fuel cell (PEMFC) stack and has multiple functions. Metallic bipolar plate candidates have advantages over composite rivals in excellent electrical and thermal conductivity, good mechanical strength, high chemical stability, very wide alloy choices, low cost and, most importantly, existing pathways for high-volume, high-speed mass production. The challenges with metallic bipolar plates are the higher contact resistance and possible corrosion products, which may contaminate the membrane electrode assembly. This review evaluates the candidate metallic and coating materials for bipolar plates and gives the perspective of the research trends. (Abstract Copyright [2010], Wiley Periodicals, Inc.)

Environmental and economic assessment of discharges from Gulf of Mexico region oil and gas operations

International Nuclear Information System (INIS)

Gettleson, D.A.

1993-01-01

Continental Shelf Associates, Inc. (CSA) was contracted to conduct a three-year study of the environmental and health related impacts of produced water and sand discharges from oil and gas operations. Data on naturally occurring radioactive materials (NORM), heavy metals, and hydrocarbons in water, sediment, and biota will be collected and evaluated. Health related impacts will be studied through field collections and analyses of commercially- and recreationally-important fish and shellfish tissues. Additionally, information on seafood catch, consumption, and use patterns for the Gulf of Mexico will be gathered and analyzed. The facilities to be studied will include both offshore and coastal facilities in the Gulf of Mexico. Coastal sites will be additionally studied to determine ecological recovery of impacted wetland and open bay areas. The economic impact of existing and proposed effluent federal and state regulations will also be evaluated. The primary objectives of the project are to increase the base of scientific knowledge concerning (1) the fate and environmental effects of organics, trace metals, and NORM in water, sediment, and biota near several offshore oil and gas facilities; (2) the characteristics of produced water and produced sand discharges as they pertain to organics, trace metals, and NORM variably found in association with the discharges; (3) the recovery of four terminated produced water discharge sites located in wetland and high-energy open bay sites of coastal Louisiana and Texas; (4) the economic and energy supply impacts of existing and anticipated federal and state offshore and coastal discharge regulations; and (5) the catch, consumption and human use patterns of seafood species collected from coastal and offshore waters. Accomplishments for this period are described

The economics of health

OpenAIRE

Beck, V; Quinn, M; Dunn, A; Edmunds Otter, M; Hammer, N; Pitchforth, E

2008-01-01

Health economics has, in recent years, become a major area of research in economics. This important collection presents a careful selection of the best articles and is classified according to eight fields within health economics. It thus provides a comprehensive cross-section of the large and disparate literature on the subject. It forms, in a real sense, a book which will be invaluable for teachers and researchers who wish to have these frequently cited articles easily to hand. It will be es...

On economic inequality and social welfare

Directory of Open Access Journals (Sweden)

Begović Boris

2015-01-01

Full Text Available The aim of the paper is to explore the relations between economic inequality and social welfare staring from the assumption that causality goes from economic inequality to social welfare. Standard methodological framework of economic science was enhanced with interpersonal function of individual welfare so the effects of economic inequality of the level of social welfare can be considered. It was demonstrated that there is no unequivocal theoretical conclusion and that differences in the preferences among people should be empirical considered for more insights. The analysis of the consequences of economic inequality to economic growth, i.e. dynamics of social welfare, demonstrated that there are numerous mechanisms of causality with the countervailing effects. The most important mechanism by which inequality speeds-up economic growth is based on the increased saving and invents rates, and the most important mechanism by which it slows-down growth is based on decreasing investments in human capital. Accordingly, there is no unequivocal theoretical conclusion also in this case. Nonetheless, modern growth theory has demonstrated that that the most dangerous economic growth is inequality of the treatment of economic agents, i.e. discrimination and exclusion, as that kind of inequality creates substantial allocative inefficiency.

A novel heavy metal ATPase peptide from Prosopis juliflora is involved in metal uptake in yeast and tobacco.

Science.gov (United States)

Keeran, Nisha S; Ganesan, G; Parida, Ajay K

2017-04-01

Heavy metal pollution of agricultural soils is one of the most severe ecological problems in the world. Prosopis juliflora, a phreatophytic tree species, grows well in heavy metal laden industrial sites and is known to accumulate heavy metals. Heavy Metal ATPases (HMAs) are ATP driven heavy metal pumps that translocate heavy metals across biological membranes thus helping the plant in heavy metal tolerance and phytoremediation. In the present study we have isolated and characterized a novel 28.9 kDa heavy metal ATPase peptide (PjHMT) from P. juliflora which shows high similarity to the C-terminal region of P 1B ATPase HMA1. It also shows the absence of the invariant signature sequence DKTGT, and the metal binding CPX motif but the presence of conserved regions like MVGEGINDAPAL (ATP binding consensus sequence), HEGGTLLVCLNS (metal binding domain) and MLTGD, GEGIND and HEGG motifs which play important roles in metal transport or ATP binding. PjHMT, was found to be upregulated under cadmium and zinc stress. Heterologous expression of PjHMT in yeast showed a higher accumulation and tolerance of heavy metals in yeast. Further, transgenic tobacco plants constitutively expressing PjHMT also showed increased accumulation and tolerance to cadmium. Thus, this study suggests that the transport peptide from P. juliflora may have an important role in Cd uptake and thus in phytoremediation.

BIOACCUMULATION AND DEPURATION STUDIES OF LEAD NITRATE ON ECONOMICALLY IMPORTANT SHRIMP PENAEOUS MONODON

OpenAIRE

S.Palani Kumar; A.S.Sharadhamma

2013-01-01

Current study of Bioaccumulation and Depuration of Lead nitrate on marine shrimp Penaeous monodon shows Lead nitrate accumulation more in hepatopancreas compared to muscle and the depuration level of heavy metal Lead nitrate was more through hepatopancreas comparing to muscle tissues, when comparing to the control animals.This shows the major role of Hepatopacreas in Bioaccumulation and depuration in this study on muscle tissues and hepatopancreas tissues

State-of-the-art of furnace recuperation in the primary metals industry: technical briefing report

Energy Technology Data Exchange (ETDEWEB)

Moore, N.L.

1983-08-01

Existing and emerging recuperator technology is identified, as well as the technical and economic issues in applying such technology. An overview of recuperation and its relevance to the primary metals industry is presented. Design considerations, equipment, and energy and cost savings of five recuperator applications in the primary metals industry are examined. Three applications include a case history of a recent recuperator installation. A cost engineering analysis of recuperator technology is included to ensure that technically feasible engineering projects are also economically attractive business ventures. An overview of emerging recuperation technology is presented.

Unusual and highly tunable missing-linker defects in zirconium metal-organic framework UiO-66 and their important effects on gas adsorption.

Science.gov (United States)

Wu, Hui; Chua, Yong Shen; Krungleviciute, Vaiva; Tyagi, Madhusudan; Chen, Ping; Yildirim, Taner; Zhou, Wei

2013-07-17

UiO-66 is a highly important prototypical zirconium metal-organic framework (MOF) compound because of its excellent stabilities not typically found in common porous MOFs. In its perfect crystal structure, each Zr metal center is fully coordinated by 12 organic linkers to form a highly connected framework. Using high-resolution neutron power diffraction technique, we found the first direct structural evidence showing that real UiO-66 material contains significant amount of missing-linker defects, an unusual phenomenon for MOFs. The concentration of the missing-linker defects is surprisingly high, ∼10% in our sample, effectively reducing the framework connection from 12 to ∼11. We show that by varying the concentration of the acetic acid modulator and the synthesis time, the linker vacancies can be tuned systematically, leading to dramatically enhanced porosity. We obtained samples with pore volumes ranging from 0.44 to 1.0 cm(3)/g and Brunauer-Emmett-Teller surface areas ranging from 1000 to 1600 m(2)/g, the largest values of which are ∼150% and ∼60% higher than the theoretical values of defect-free UiO-66 crystal, respectively. The linker vacancies also have profound effects on the gas adsorption behaviors of UiO-66, in particular CO2. Finally, comparing the gas adsorption of hydroxylated and dehydroxylated UiO-66, we found that the former performs systematically better than the latter (particularly for CO2) suggesting the beneficial effect of the -OH groups. This finding is of great importance because hydroxylated UiO-66 is the practically more relevant, non-air-sensitive form of this MOF. The preferred gas adsorption on the metal center was confirmed by neutron diffraction measurements, and the gas binding strength enhancement by the -OH group was further supported by our first-principles calculations.

Metal and metalloid removal in constructed wetlands, with emphasis on the importance of plants and standardized measurements: A review

International Nuclear Information System (INIS)

Marchand, L.; Mench, M.; Jacob, D.L.; Otte, M.L.

2010-01-01

This review integrates knowledge on the removal of metals and metalloids from contaminated waters in constructed wetlands and offers insight into future R and D priorities. Metal removal processes in wetlands are described. Based on 21 papers, the roles and impacts on efficiency of plants in constructed wetlands are discussed. The effects of plant ecotypes and class (monocots, dicots) and of system size on metal removal are addressed. Metal removal rates in wetlands depend on the type of element (Hg > Mn > Fe = Cd > Pb = Cr > Zn = Cu > Al > Ni > As), their ionic forms, substrate conditions, season, and plant species. Standardized procedures and data are lacking for efficiently comparing properties of plants and substrates. We propose a new index, the relative treatment efficiency index (RTEI), to quantify treatment impacts on metal removal in constructed wetlands. Further research is needed on key components, such as effects of differences in plant ecotypes and microbial communities, in order to enhance metal removal efficiency. - A new index, the relative treatment efficiency index (RTEI), to quantify treatment impacts on metal and metalloid removal in constructed wetlands.

Microbiological metal extraction processes

International Nuclear Information System (INIS)

Torma, A.E.

1991-01-01

Application of biotechnological principles in the mineral processing, especially in hydrometallurgy, has created new opportunities and challenges for these industries. During the 1950's and 60's, the mining wastes and unused complex mineral resources have been successfully treated in bacterial assisted heap and dump leaching processes for copper and uranium. The interest in bio-leaching processes is the consequence of economic advantages associated with these techniques. For example, copper can be produced from mining wastes for about 1/3 to 1/2 of the costs of copper production by the conventional smelting process from high-grade sulfide concentrates. The economic viability of bio leaching technology lead to its world wide acceptance by the extractive industries. During 1970's this technology grew into a more structured discipline called 'bio hydrometallurgy'. Currently, bio leaching techniques are ready to be used, in addition to copper and uranium, for the extraction of cobalt, nickel, zinc, precious metals and for the desulfurization of high-sulfur content pyritic coals. As a developing technology, the microbiological leaching of the less common and rare metals has yet to reach commercial maturity. However, the research in this area is very active. In addition, in a foreseeable future the biotechnological methods may be applied also for the treatment of high-grade ores and mineral concentrates using adapted native and/or genetically engineered microorganisms. (author)

Phytoremediation of Metal Contaminated Soil Using Willow: Exploiting Plant-Associated Bacteria to Improve Biomass Production and Metal Uptake.

Science.gov (United States)

Janssen, Jolien; Weyens, Nele; Croes, Sarah; Beckers, Bram; Meiresonne, Linda; Van Peteghem, Pierre; Carleer, Robert; Vangronsveld, Jaco

2015-01-01

Short rotation coppice (SRC) of willow and poplar is proposed for economic valorization and concurrently as remediation strategy for metal contaminated land in northeast-Belgium. However, metal phytoextraction appears insufficient to effectuate rapid reduction of soil metal contents. To increase both biomass production and metal accumulation of SRC, two strategies are proposed: (i) in situ selection of the best performing clones and (ii) bioaugmentation of these clones with beneficial plant-associated bacteria. Based on field data, two experimental willow clones, a Salix viminalis and a Salix alba x alba clone, were selected. Compared to the best performing commercial clones, considerable increases in stem metal extraction were achieved (up to 74% for Cd and 91% for Zn). From the selected clones, plant-associated bacteria were isolated and identified. All strains were subsequently screened for their plant growth-promoting and metal uptake enhancing traits. Five strains were selected for a greenhouse inoculation experiment with the selected clones planted in Cd-Zn-Pb contaminated soil. Extraction potential tended to increase after inoculation of S. viminalis plants with a Rahnella sp. strain due to a significantly increased twig biomass. However, although bacterial strains showing beneficial traits in vitro were used for inoculation, increments in extraction potential were not always observed.

Use of metallic fibers in concretes

Directory of Open Access Journals (Sweden)

Kherbache Souad

2014-04-01

Full Text Available The addition of a waste (fibers in construction materials, particularly, the concretes is a technique increasingly used, for several reasons, either ecological, or economic, or to improve some properties in a fresh or hardened state. In our work we studied the behavior of the concrete and the mortar containing metallic fibers resulting from the unit BCR which is in Bordj-Menaiel in Algeria (metallic fibers resulting from the rejection at the end of the domestic operation of silvering of the tools and which is stored in plastic bags which are preserved in metal containers. Our work consists to study the behavior of the concretes and the mortars containing these fibers of cement substitution. We noted that the use of these fibers in the concretes in substitution of cement decreases its of compressive strength and flexural strength but to 10% of waste these strength remain acceptable.

Transfer of heavy metals through terrestrial food webs: a review.

Science.gov (United States)

Gall, Jillian E; Boyd, Robert S; Rajakaruna, Nishanta

2015-04-01

Heavy metals are released into the environment by both anthropogenic and natural sources. Highly reactive and often toxic at low concentrations, they may enter soils and groundwater, bioaccumulate in food webs, and adversely affect biota. Heavy metals also may remain in the environment for years, posing long-term risks to life well after point sources of heavy metal pollution have been removed. In this review, we compile studies of the community-level effects of heavy metal pollution, including heavy metal transfer from soils to plants, microbes, invertebrates, and to both small and large mammals (including humans). Many factors contribute to heavy metal accumulation in animals including behavior, physiology, and diet. Biotic effects of heavy metals are often quite different for essential and non-essential heavy metals, and vary depending on the specific metal involved. They also differ for adapted organisms, including metallophyte plants and heavy metal-tolerant insects, which occur in naturally high-metal habitats (such as serpentine soils) and have adaptations that allow them to tolerate exposure to relatively high concentrations of some heavy metals. Some metallophyte plants are hyperaccumulators of certain heavy metals and new technologies using them to clean metal-contaminated soil (phytoextraction) may offer economically attractive solutions to some metal pollution challenges. These new technologies provide incentive to catalog and protect the unique biodiversity of habitats that have naturally high levels of heavy metals.

Application of Metal Oxide Heterostructures in Arsenic Removal from Contaminated Water

Directory of Open Access Journals (Sweden)

Lei Chen

2014-01-01

Full Text Available It has become one of the major environmental problems for people worldwide to be exposed to high arsenic concentrations through contaminated drinking water, and even the long-term intake of small doses of arsenic has a carcinogenic effect. As an efficient and economic approach for the purification of arsenic-containing water, the adsorbents in adsorption processes have been widely studied. Among a variety of adsorbents reported, the metal oxide heterostructures with high surface area and specific affinity for arsenic adsorption from aqueous systems have demonstrated a promising performance in practical applications. This review paper aims to summarize briefly the metal oxide heterostructures in arsenic removal from contaminated water, so as to provide efficient, economic, and robust solutions for water purification.

Friction and metal transfer for single-crystal silicon carbide in contact with various metals in vacuum

International Nuclear Information System (INIS)

Miyoshi, K.; Buckley, D.H.

1978-04-01

Sliding friction experiments were conducted with single-crystal silicon carbide in contact with transition metals (tungsten, iron, rhodium, nickel, titanium, and cobalt), copper, and aluminum. Results indicate the coefficient of friction for a silicon carbide-metal system is related to the d bond character and relative chemical activity of the metal. The more active the metal, the higher the coefficient of friction. All the metals examined transferred to the surface of silicon carbide in sliding. The chemical activity of metal to silicon and carbon and shear modulus of the metal may play important roles in metal transfer and the form of the wear debris. The less active metal is, and the greater resistance to shear it has, with the exception of rhodium and tungsten, the less transfer to silicon carbide

Geosciences: an important tool for the ethical advancement and the economic and cultural development of our society