WorldWideScience

Sample records for ecological construction methods

  1. Methodical ecologization principles in construction management

    OpenAIRE

    Nuzhina Irina Pavlovna; Yudakhina Olga Borisovna

    2015-01-01

    In the article the subject of ecologization of construction sector is presented, the necessity of ecologization technology and technological processes is proved. The article also presents principles of ecologically friendly management of construction and investment activities and describes these principles in detail.

  2. A climatic environmental performance assessment method for ecological city construction: Application to Beijing Yanqi Lake

    Directory of Open Access Journals (Sweden)

    Xiao-Yi Fang

    2015-03-01

    Full Text Available In contrast to the input perspective for evaluating planning metrics, this research takes the climatic environmental output effects as the starting point for assessing ecological city construction. Based on approaches such as observation data analysis, meteorological model simulation, and remote sensing, a set of climatic environmental performance assessment methods is developed and established. These methods mainly focus on surface ventilation assessment and urban thermal environment assessment. With the Yanqi Lake ecological development demonstration area located in Huairou district, Beijing as an example, the assessment of the local climatic environment before and after the construction are conducted, and relevant policy suggestions for urban planning and construction are presented. The results show that after development, the ventilation capacity will decrease overall and the ventilation potential index will decrease from 0.53 to 0.44. While this is not a large reduction, and is still at a favorable level, the ventilation potential in some local areas will markedly decrease. Furthermore, the thermal environment will become poorer to some extent; the urban heat island (UHI area and intensity will increase compared with the current situation; continuous heat islands may occur in local areas; the UHI potential index of the core area will rise from 0.0878 to 0.1217 (still a favorable level. Therefore, urban surfaces should be carefully developed and arranged during planning. It is suggested that the negative impacts of large areas of urban construction on the local climatic environment in the Yanqi Lake could be mitigated by 1 strengthening the airflow by introducing fresh, cold, northwesterly air via constructed ventilation corridors, 2 increasing the number of ecological cold sources, particularly for water bodies and green belts to prevent the UHI in the southern region of Yanqi Lake from becoming linked with each other, and 3 considering a

  3. Ecological risk assessment of hydropower dam construction based on ecological network analysis

    OpenAIRE

    Chen, Shaoqing; Fath, Brian D.; Chen, Bin

    2010-01-01

    Dam construction is regarded as one of the major factors contributing to significant modifications of the river ecosystems, and the ecological risk (ER) assessment of dam construction has received growing attention in recent years. In the present study, we explored the potential ecological risk caused by dam project based on the general principles of the ecological risk assessment. Ecological network analysis was proposed as the usable analytic method for the implement of ecological risk asse...

  4. [Regional ecological construction and mission of landscape ecology].

    Science.gov (United States)

    Xiao, Duning; Xie, Fuju; Wei, Jianbing

    2004-10-01

    The eco-construction on regional and landscape scale is the one which can be used to specific landscape and intercrossing ecosystem in specific region including performing scientific administration of ecosystem and optimizing environmental function. Recently, the government has taken a series of significant projects into action, such as national forest protection item, partly forest restoration, and adjustment of water, etc. Enforcing regional eco-construction and maintaining the ecology security of the nation have become the strategic requisition. In various regions, different eco-construction should be applied, for example, performing ecological safeguard measure in ecological sensitive zone, accommodating the ecological load in ecological fragile zone, etc., which can control the activities of human being, so that, sustainable development can be reached. Facing opportunity and challenge in the development of landscape ecology, we have some key topics: landscape pattern of ecological security, land use and ecological process, landscape changes under human activity stress, quantitative evaluation of the influence on human being activities, evaluation of zonal ecological security and advance warning of ecological risk, and planning and optimizing of model in landscape eco-construction.

  5. [Regional ecological planning and ecological network construction: a case study of "Ji Triangle" Region].

    Science.gov (United States)

    Li, Bo; Han, Zeng-Lin; Tong, Lian-Jun

    2009-05-01

    By the methods of in situ investigation and regional ecological planning, the present ecological environment, ecosystem vulnerability, and ecological environment sensitivity in "Ji Triangle" Region were analyzed, and the ecological network of the study area was constructed. According to the ecological resources abundance degree, ecological recovery, farmland windbreak system, environmental carrying capacity, forestry foundation, and ecosystem integrity, the study area was classified into three regional ecological function ecosystems, i. e., east low hill ecosystem, middle plain ecosystem, and west plain wetland ecosystem. On the basis of marking regional ecological nodes, the regional ecological corridor (Haerbin-Dalian regional axis, Changchun-Jilin, Changchun-Songyuan, Jilin-Songyuan, Jilin-Siping, and Songyuan-Siping transportation corridor) and regional ecological network (one ring, three links, and three belts) were constructed. Taking the requests of regional ecological security into consideration, the ecological environment security system of "Ji Triangle" Region, including regional ecological conservation district, regional ecological restored district, and regional ecological management district, was built.

  6. Ecological network analysis: network construction

    NARCIS (Netherlands)

    Fath, B.D.; Scharler, U.M.; Ulanowicz, R.E.; Hannon, B.

    2007-01-01

    Ecological network analysis (ENA) is a systems-oriented methodology to analyze within system interactions used to identify holistic properties that are otherwise not evident from the direct observations. Like any analysis technique, the accuracy of the results is as good as the data available, but

  7. About ecological aspects of "Eurasia" canal construction

    Directory of Open Access Journals (Sweden)

    G. M. Abdurakhmanov

    2010-01-01

    Full Text Available Ecological aspects of "Eurasia" canal construction are considered here. The fact that can negatively affect natural area preservation (preserves, reserves, located in Kumo-Manych depression, along where the canal construction will take place, is shown in this article.

  8. [Ecological carrying capacity and Chongming Island's ecological construction].

    Science.gov (United States)

    Wang, Kaiyun; Zou, Chunjing; Kong, Zhenghong; Wang, Tianhou; Chen, Xiaoyong

    2005-12-01

    This paper overviewed the goals of Chongming Island's ecological construction and its background, analyzed the current eco-economic status and constraints of the Island, and put forward some scientific issues on its ecological construction. It was suggested that for the resources-saving and sustainable development of the Island, the researches on its ecological construction should be based on its ecological carrying capacity, fully take the regional characteristics into consideration, and refer the successful development modes at home and abroad. The carrying capacity study should ground on systemic and dynamic views, give a thorough evaluation of the Island's present carrying capacity, simulate its possible changes, and forecast its demands and risks. Operable countermeasures to promote the Island's carrying capacity should be worked out, new industry structure, population scale, and optimized distribution projects conforming to regional carrying capacity should be formulated, and effective ecological security alarming and control system should be built, with the aim of providing suggestions and strategic evidences for the decision-making of economic development and sustainable environmental resources use of the region.

  9. Construction and Application of Enhanced Remote Sensing Ecological Index

    Science.gov (United States)

    Wang, X.; Liu, C.; Fu, Q.; Yin, B.

    2018-04-01

    In order to monitor the change of regional ecological environment quality, this paper use MODIS and DMSP / OLS remote sensing data, from the production capacity, external disturbance changes and human socio-economic development of the three main factors affecting the quality of ecosystems, select the net primary productivity, vegetation index and light index, using the principal component analysis method to automatically determine the weight coefficient, construction of the formation of enhanced remote sensing ecological index, and the ecological environment quality of Hainan Island from 2001 to 2013 was monitored and analyzed. The enhanced remote sensing ecological index combines the effects of the natural environment and human activities on ecosystems, and according to the contribution of each principal component automatically determine the weight coefficient, avoid the design of the weight of the parameters caused by the calculation of the human error, which provides a new method for the operational operation of regional macro ecological environment quality monitoring. During the period from 2001 to 2013, the ecological environment quality of Hainan Island showed the characteristics of decend first and then rise, the ecological environment in 2005 was affected by severe natural disasters, and the quality of ecological environment dropped sharply. Compared with 2001, in 2013 about 20000 square kilometers regional ecological environmental quality has improved, about 8760 square kilometers regional ecological environment quality is relatively stable, about 5272 square kilometers regional ecological environment quality has decreased. On the whole, the quality of ecological environment in the study area is good, the frequent occurrence of natural disasters, on the quality of the ecological environment to a certain extent.

  10. Suggestions on Strengthening Greening Construction of Ecological Residential Areas

    OpenAIRE

    Li, Peng

    2013-01-01

    Greening construction is an important part of the construction of ecological residential areas, but there exist some misunderstandings in greening construction of ecological residential districts at present. Based on the description of functions of green space in ecological residential areas, the summarization of principles of greening design, and the discussion of questions in greening construction of ecological residential districts, some suggestions as well as specific measures for strengt...

  11. PRINCIPLES OF ECOLOGICAL CONSTRUCTION IN FACHWERK ARCHITECTURE

    Directory of Open Access Journals (Sweden)

    Shubina Elena Vasil'evna

    2013-04-01

    Full Text Available The authors consider the ecological aspects of application of Fachwerk, a traditional structural system, in the present-day construction. The authors have identified the potential and defined the principal development and modernization trends of the Fachwerk architecture. The author provides arguments of outstanding contemporary architects in support of the statement that the Fachwerk architecture is friendly to humans and it does not deliver any damage to the environment. Fachwerk complies with the criteria of sustainable development; therefore, it may be retained in the future architecture.

  12. Concept and Connotation of Water Resources Carrying Capacity in Water Ecological Civilization Construction

    Science.gov (United States)

    Chao, Zhilong; Song, Xiaoyu; Feng, Xianghua

    2018-01-01

    Water ecological civilization construction is based on the water resources carrying capacity, guided by the sustainable development concept, adhered to the human-water harmony thoughts. This paper has comprehensive analyzed the concept and characteristics of the carrying capacity of water resources in the water ecological civilization construction, and discussed the research methods and evaluation index system of water carrying capacity in the water ecological civilization construction, finally pointed out that the problems and solutions of water carrying capacity in the water ecological civilization construction and put forward the future research prospect.

  13. Ecological security pattern construction based on ecological protection redlines in China

    Science.gov (United States)

    Zou, Changxin

    2017-04-01

    China is facing huge environmental problems with its current rapid rate of urbanization and industrialization, thus causing biodiversity loss, ecosystem service degradation on a major scale. Against this background, three previous examples (the nature reserve policy, the afforestation policy, and the zoning policy) are implemented in China. These all play important roles in protecting natural ecosystems, although they can sometimes cause new problems and lack rigorous targets for environmental outcomes. To overcome current management conflicts, China has proposed a new "ecological protection redlines" policy (EPR). EPR can be defined as the ecological baseline area needed to provide ecosystem services to guarantee and maintain ecological safety. This study analyzed the scope, objectives and technical methods of delineating EPR in China, and put forward the proposed scheme for the ecological security pattern based on EPR. We constructed three kinds of redlines in China, including key ecological function area redlines, ecological sensitive or fragile areas redlines, and forbidden development areas redlines. For the key ecological function area redlines, a total of 38 water conservation functional zones have been designated, covering a total area of 3.23 million km2; 14 soil conservation zones have been designated, covering a total area of 881700 km2; wind-prevention and sand-fixation zones across the country cover a total area of about 1.73 million km2, accounting for 57.13% of the total land area of the whole country. With respect to the ecologically vulnerable redlines, 18 ecologically vulnerable zones has been designated across the country, covering 2.19 million km2, accounting for 22.86% of the total land area of the whole country. Forbidden development areas redlines covered a total area of 3.29 million km2, accounting for 34.3% of the total land area of the whole country. We also suggest to form a complete ecological security pattern including patterns of

  14. The Ecology and Evolution of Constructed Ecosystems as Green Infrastructure

    Directory of Open Access Journals (Sweden)

    Jeremy eLundholm

    2015-09-01

    Full Text Available Green infrastructure consists of ecosystems that provide valuable services to urban areas. Constructed ecosystems, including green roofs, bioretention systems, constructed wetlands and bioreactors are artificial, custom-built components of green infrastructure that are becoming more common in cities. Small size, strong spatial boundaries, ecological novelty and the role of human design characterize all constructed ecosystems, influencing their functions and interactions with other urban ecosystems. Here I outline the relevance of ecology and evolution in understanding the functioning of constructed ecosystems. In turn, a research focus on the distinctive aspects of constructed ecosystems can contribute to fundamental science.

  15. Ecological approach in constructing residential areas

    Directory of Open Access Journals (Sweden)

    Bogdanović Ružica

    2004-01-01

    Full Text Available As a concept sustainable development has evolved over the past two decades from a concept closely associated with the biophysical environment to become much more complex, embracing social, cultural, economic political and esthetic phenomenon, which are invariably in mutual interaction, so they influence sustainability of natural environment. The very notion of "sustainable" we are meeting today in almost all significance areas of human activities. Contemporary planning, projecting and building techniques undoubtedly implied integration of goals of environmental prevention with goals of socio-economic development, all with respecting the esthetic standards. This paper represents experience from foreign praxis. Project defines and resolves objectives from social, economical, morphological and ecological aspects. Most important is aspect of Ecological Optimisation, which consists of main components: energy use optimization, water concept, exemplary waste management concept and ecological soil management.

  16. Quantifying Ecology: Constructing Life History Tables

    Science.gov (United States)

    Balgopal, Meena M.; Ode, Paul J.

    2009-01-01

    In the biology community there has been a call for integrating lessons on population growth rate and the human population crisis into biology classrooms. Ecologists fear that students do not understand the relationship between the magnitude of the human population growth and Earth's carrying capacity, as well as some basic ecological concepts. The…

  17. Waste Management in Industrial Construction: Investigating Contributions from Industrial Ecology

    OpenAIRE

    Larissa A. R. U. Freitas; Alessandra Magrini

    2017-01-01

    The need for effective construction waste management is growing in importance, due to the increasing generation of construction waste and to its adverse impacts on the environment. However, despite the numerous studies on construction waste management, recovery of construction waste through Industrial Symbiosis and the adoption of other inter-firm practices, comprised within Industrial Ecology field of study, have not been fully explored. The present research aims to investigate Industrial Ec...

  18. Ecological and evolutionary consequences of niche construction for its agent.

    Science.gov (United States)

    Kylafis, Grigoris; Loreau, Michel

    2008-10-01

    Niche construction can generate ecological and evolutionary feedbacks that have been underinvestigated so far. We present an eco-evolutionary model that incorporates the process of niche construction to reveal its effects on the ecology and evolution of the niche-constructing agent. We consider a simple plant-soil nutrient ecosystem in which plants have the ability to increase the input of inorganic nutrient as an example of positive niche construction. On an ecological time scale, the model shows that niche construction allows the persistence of plants under infertile soil conditions that would otherwise lead to their extinction. This expansion of plants' niche, however, requires a high enough rate of niche construction and a high enough initial plant biomass to fuel the positive ecological feedback between plants and their soil environment. On an evolutionary time scale, we consider that the rates of niche construction and nutrient uptake coevolve in plants while a trade-off constrains their values. Different evolutionary outcomes are possible depending on the shape of the trade-off. We show that niche construction results in an evolutionary feedback between plants and their soil environment such that plants partially regulate soil nutrient content. The direct benefit accruing to plants, however, plays a crucial role in the evolutionary advantage of niche construction.

  19. Methods of ecological capability evaluation of forest

    International Nuclear Information System (INIS)

    Hosseini, M.; Makhdoum, M.F.; Akbarnia, M.; Saghebtalebi, Kh.

    2000-01-01

    In this research common methods of ecological capability evaluation of forests were reviewed and limitations for performance were analysed. Ecological capability of forests is an index that show site potential in several role of wood production, soil conservation, flood control, biodiversity, conservation and water supply. This index is related to ecological characteristics of land, such as soil, micro climate, elevation, slope and aspect that affect potential of sites. Suitable method of ecological capability evaluation must be chosen according to the objective of forestry. Common methods for ecological capability evaluation include plant and animal diversity, site index curve, soil and land form, inter branches, index plants, leave analyses, analyses regeneration and ecological mapping

  20. Countermeasures for China’s Ecological Environment Construction in Land Reclamation

    Institute of Scientific and Technical Information of China (English)

    Chen; LI; Xinfeng; LIU; Zhe; PENG; Tao; SI; Lingfeng; KONG

    2013-01-01

    Basic situation of the current ecological environment construction in land consolidation and rehabilitation of China is introduced. The related advanced experience abroad is summarized from mainly four aspects, namely policy, system as well as subject development, planning guidance, design method of project planning and engineering study, and practical countermeasures to China’s ecological environment construction in land reclamation are proposed. In terms of policy, system and subject, relevant regulations, policies and system construction should be strengthened and the framework of policy, system and subject development in ecological landscape construction of China’s land reclamation should be proposed, integrating ecological environment construction into land reclamation. At the level of strategic planning, the spatial layout and construction key points of green infrastructure in land reclamation of "urban multi-functional developing region, eastern economic developed region, central modern agricultural region and northwestern ecological fragile region" should be achieved. At the level of project planning design, ecological principles, sustainable landscape design principles and vernacular landscape design methods are to be integrated into the planning procedure to form operable technique regulations or introductions. At the level of engineering design, engineering technique system, standards and regulations of ditches, roads, forests and channels with local distinctions should be formulated according to the characters and strategic demands of urbanization, industrialization, agriculture modernization and ecological environment preservation in different regions.

  1. Waste Management in Industrial Construction: Investigating Contributions from Industrial Ecology

    Directory of Open Access Journals (Sweden)

    Larissa A. R. U. Freitas

    2017-07-01

    Full Text Available The need for effective construction waste management is growing in importance, due to the increasing generation of construction waste and to its adverse impacts on the environment. However, despite the numerous studies on construction waste management, recovery of construction waste through Industrial Symbiosis and the adoption of other inter-firm practices, comprised within Industrial Ecology field of study, have not been fully explored. The present research aims to investigate Industrial Ecology contributions to waste management in industrial construction. The waste management strategies adopted in two industrial construction projects in Brazil are analyzed. The main waste streams generated are identified, recycling and landfilling diversion rates are presented and waste recovery through Industrial Symbiosis is discussed. A SWOT analysis was carried out. Results demonstrate that 9% of the waste produced in one of the projects was recovered through Industrial Symbiosis, while in the other project, waste recovery through Industrial Symbiosis achieved the rate of 30%. These data reveal Industrial Symbiosis’ potential to reduce landfilling of industrial construction wastes, contributing to waste recovery in construction. In addition, results show that industrial construction projects can benefit from the following synergies common in Industrial Ecology place-based approaches: centralized waste management service, shared waste management infrastructure and administrative simplification.

  2. Advanced construction methods in ACR

    International Nuclear Information System (INIS)

    Elgohary, M.; Choy, E.; Yu, S.K.W.

    2002-01-01

    The ACR - Advanced CANDU Reactor, developed by Atomic Energy of Canada Limited (AECL), is designed with constructability considerations as a major requirement during all project phases from the concept design stage to the detail design stage. This necessitated a much more comprehensive approach in including constructability considerations in the design to ensure that the construction duration is met. For the ACR-700, a project schedule of 48 months has been developed for the nth replicated unit with a 36 month construction period duration from First Concrete to Fuel Load. An overall construction strategy that builds on the success of the construction methods that are proven in the construction of the Qinshan CANDU 6 project has been developed for the ACR. The overall construction strategy comprises the 'Open Top' construction technique using a Very Heavy Lift crane, parallel construction activities, with extensive modularization and prefabrication. In addition, significant applications of up to date construction technology will be implemented, e.g. large volume concrete pours, prefabricated rebar, use of climbing forms, composite structures, prefabricated permanent formwork, automatic welding, and utilization of the latest electronic technology tools such as 3D CADDs modelling yields a very high quality, clash free product to allow construction to be completed 'right the first time' and eliminates rework. Integration of 3D CADDs models and scheduling tools such as Primavera has allowed development of actual construction sequences and an iterative approach to schedule verification and improvement. Modularization and prefabrication are major features of the ACR design in order to achieve the project schedule. For the reactor building approximately 80% of the volume will be installed as modules or prefabricated assembles. This ensures critical path activities are achieved. This paper examines the advanced construction methods implemented in the design in order to

  3. Ecological effectiveness as an essential quality requirement of innovational construction

    Directory of Open Access Journals (Sweden)

    Mkrtchyan Tamara

    2017-01-01

    Full Text Available Nowadays it seems to be very essential to develop national construction industry by implementation of innovative technologies. As an object of innovational construction «Smart house» or «green building» demonstrates the latest advances in ecological building materials, energy-saving structures and lean-technologies. According to the concept of TQM «green building» has tube compatible with environmental protection, environment sustainability and ecological effectiveness requirements. «Green certification» includes these terms into the National environment sustainability rating system. The main goal of this research work was to review and compare theoretical models and concepts of effectiveness and analyze their applicability to determine the term ecological effectiveness as the main Quality Score.

  4. [Effect of ecological civilized homestead construction on schistosomiasis control].

    Science.gov (United States)

    Tang, Meng; Jia, Tie-Wu; Wu, Zi-Song; Mao, Ping; Chen, Lin; Li, Han-Gang; Zhong, Bo; Qiu, Dong-Chuan; Yao, Qin; Hu, You-Ping

    2012-02-01

    To evaluate the effect of Ecological Civilized Homestead Construction on schistosomiasis control. The data of ecological civilized homestead construction and schistosomiasis control were collected and analyzed in Meiwan Village, Shuangqiao Town, Danling County, Sichuan Province from 2004 to 2010. Ecological Civilized Homestead Construction was carried out from 2004 to 2010. Totally 454 bio-gas pools were built. All the farmers used well water. The popularized rates of the household bio-gas pool, sanitary toilet, sewage treatment pool reached 100%. The number of cattle was 4, which decreased by 91.30% compared with that in 2004, and all the cattle were fed in captivity. The schistosome infection rates of populations were 0.26% and 0.30% in 2005 and 2008, respectively, and nobody was infected in other years. The infection rate of cattle was 0 from 2004 to 2010. The awareness rate of knowledge about schistosomiasis control achieved 100% in the population over 6 years old. Most of the farmers could use certain protective measures while they were farming. The effect of ecological civilized homestead construction on schistosomiasis control is remarkable.

  5. Model Configuration and Innovative Design of College Students’ Ecological Civilization Construction

    Science.gov (United States)

    Chengwen, Yang

    2018-02-01

    This study is based on Marxist eco-civilization thought, combining with Eco management theory, puts forward solutions for college students’ ecological civilization construction. The paper based on the perspective of ecological management theory to analyze the main elements of eco-civilization construction of college students, mainly including five categories. In view of above-mentioned analyze, constructed the model of college students’ eco-civilization which is based on the theory of eco-management, and put forward on concrete methods to improve it.

  6. Ecological balance between supply and demand based on cultivated land ecological footprint method in Guizhou Province

    Science.gov (United States)

    Qian, Qinghuan; Zhou, Dequan; Bai, Xiaoyong; Xiao, Jianyong; Chen, Fei; Zeng, Cheng

    2018-01-01

    In order to construct the indicators of the balance between supply and demand of the cultivated land ecological carrying capacity, basing on the relation of the cultivated land ecological carrying capacity supply and demand, applying the model of Cultivated Land Ecological Footprints and the method of CIS and considering the factors of cultivated land production, taking the statistical data of 2015 as an example, and then made a systematic evaluation of the balance between supply and demand of the cultivated land ecological carrying capacity in Guizhou Province. The results show that (1) the spatial distribution of supply and demand of cultivated land ecological carrying capacity in Guizhou is unbalanced, and the northern and eastern parts are the overloading area, the middle, the south and the west parts are the balance area. (2) From the perspective of cultivated land structure, the crops with ecological carrying capacity surplus were rice, vegetables and peanuts, among which rice was the highest and the ecological balance index was 0.7354. The crops with ecological carrying capacity overload were potato, wheat, maize, rapeseeds, soybeans and cured tobacco, of which the index of potato up to 7.11, other types of indices are less than 1.5. The research can provide the ecological security early warning, the overall plan of land use and sustainable development of the area cultivated land with scientific evidence and decision support.

  7. Cost-Sharing of Ecological Construction Based on Trapezoidal Intuitionistic Fuzzy Cooperative Games.

    Science.gov (United States)

    Liu, Jiacai; Zhao, Wenjian

    2016-11-08

    There exist some fuzziness and uncertainty in the process of ecological construction. The aim of this paper is to develop a direct and an effective simplified method for obtaining the cost-sharing scheme when some interested parties form a cooperative coalition to improve the ecological environment of Min River together. Firstly, we propose the solution concept of the least square prenucleolus of cooperative games with coalition values expressed by trapezoidal intuitionistic fuzzy numbers. Then, based on the square of the distance in the numerical value between two trapezoidal intuitionistic fuzzy numbers, we establish a corresponding quadratic programming model to obtain the least square prenucleolus, which can effectively avoid the information distortion and uncertainty enlargement brought about by the subtraction of trapezoidal intuitionistic fuzzy numbers. Finally, we give a numerical example about the cost-sharing of ecological construction in Fujian Province in China to show the validity, applicability, and advantages of the proposed model and method.

  8. Cost-Sharing of Ecological Construction Based on Trapezoidal Intuitionistic Fuzzy Cooperative Games

    Directory of Open Access Journals (Sweden)

    Jiacai Liu

    2016-11-01

    Full Text Available There exist some fuzziness and uncertainty in the process of ecological construction. The aim of this paper is to develop a direct and an effective simplified method for obtaining the cost-sharing scheme when some interested parties form a cooperative coalition to improve the ecological environment of Min River together. Firstly, we propose the solution concept of the least square prenucleolus of cooperative games with coalition values expressed by trapezoidal intuitionistic fuzzy numbers. Then, based on the square of the distance in the numerical value between two trapezoidal intuitionistic fuzzy numbers, we establish a corresponding quadratic programming model to obtain the least square prenucleolus, which can effectively avoid the information distortion and uncertainty enlargement brought about by the subtraction of trapezoidal intuitionistic fuzzy numbers. Finally, we give a numerical example about the cost-sharing of ecological construction in Fujian Province in China to show the validity, applicability, and advantages of the proposed model and method.

  9. Standard Operating Procedures and Field Methods Used for Conducting Ecological Risk Assessment Case Studies. Naval Construction Battalion Center, Davisville, Rhode Island, and Naval Shipyard, Portsmouth, Kittery, Maine.

    Science.gov (United States)

    1992-05-01

    Studies by Craig et al. 20 have chloride extraction/Grignard derivatization method. shown that significant evaporative losses of TBT + Methylene...and Craig . P1J Anahiw. 1987. 112: 1781 available from IEEE Service Center. 445 Hoes tLane. 21/ Aue. W A and Flinn. C G J Cltroinato-er.. 1977, 142 145...Environmental Research Laboratory Narragansett, Narragansett, RI. Keith, L.H., W. Crummett, J. Deegan , Jr, R.A. Libby, J.K. Taylor, and B. Wentler, 1983. Annal

  10. [Scale effect of Li-Xiang Railway construction impact on landscape pattern and its ecological risk].

    Science.gov (United States)

    Wang, De-zhi; Qiu, Peng-hua; Fang, Yuan-min

    2015-08-01

    As a large corridor project, plateau railway has multiple points and passes various sensitive environments along the railway. The determination of the scope of impact on ecological environment from railway construction is often controversial in ecological impact assessment work. Taking the Tangbu-Jiantang section of Li-Xiang Railway as study object, and using present land use map (1:10000) in 2012 and DEM as data sources, corridor cutting degree index ( CCI) and cumulative effect index of corridor (CCEI) were established by topology, buffer zone and landscape metrics methods. Besides, the ecological risk index used for railway construction was improved. By quantitative analysis of characteristics of the spatio-temporal change of landscape pattern and its evolution style at different spatial scales before and after railway construction, the most appropriate evaluation scale of the railway was obtained. Then the characteristics of the spatio-temporal variation of ecological risk within this scale before and after railway construction were analyzed. The results indicated that the cutting model and degree of railway corridor to various landscape types could be effectively reflected by CCI, and the exposure and harm relations between risk sources and risk receptors of railway can be measured by CCEI. After the railway construction, the railway corridor would cause a great deal of middle cutting effect on the landscape along the railroad, which would influence wood land and grassland landscape most greatly, while would cause less effect of edge cutting and internal cutting. Landscape indices within the 600 m buffer zone demonstrated the most obvious scale effect, therefore, the 600 m zone of the railway was set as the most suitable range of ecological impact assessment. Before railway construction, the low ecological risk level covered the biggest part of the 600 m assessment zone. However, after the railway construction, the ecological risk increased significantly, and

  11. Constructing Ecological Networks Based on Habitat Quality Assessment: A Case Study of Changzhou, China

    Science.gov (United States)

    Gao, Yu; Ma, Lei; Liu, Jiaxun; Zhuang, Zhuzhou; Huang, Qiuhao; Li, Manchun

    2017-01-01

    Fragmentation and reduced continuity of habitat patches threaten the environment and biodiversity. Recently, ecological networks are increasingly attracting the attention of researchers as they provide fundamental frameworks for environmental protection. This study suggests a set of procedures to construct an ecological network. First, we proposed a method to construct a landscape resistance surface based on the assessment of habitat quality. Second, to analyze the effect of the resistance surface on corridor simulations, we used three methods to construct resistance surfaces: (1) the method proposed in this paper, (2) the entropy coefficient method, and (3) the expert scoring method. Then, we integrated habitat patches and resistance surfaces to identify potential corridors using graph theory. These procedures were tested in Changzhou, China. Comparing the outputs of using different resistance surfaces demonstrated that: (1) different landscape resistance surfaces contribute to how corridors are identified, but only slightly affect the assessment of the importance of habitat patches and potential corridors; (2) the resistance surface, which is constructed based on habitat quality, is more applicable to corridor simulations; and (3) the assessment of the importance of habitat patches is fundamental for ecological network optimization in the conservation of critical habitat patches and corridors. PMID:28393879

  12. Method of constructing reactor buildings

    International Nuclear Information System (INIS)

    Hyuga, Takenori; Nagai, Fumio; Akutsu, Masayoshi.

    1985-01-01

    Purpose: To shorten the construction period for LMFBR type reactors, as well as smoothly introduce high pressure steams generated in concretes upon loss of coolant accidents to the outside of the system. Method: After disposing a liner plate as a chamber lining of reactor buildings, heat insulation materials having steam discharge channels at the outer surface are attached to the outside of the liner plate and, further, an organic films are disposed to the outside of the heat insulation materials. Then, concretes are spiked to the outside of the organic films using the liner plate and the heat insulation material as the mold for concretes. In this way, the construction period can be shortened by utilizing the liner plate and the heat insulation materials as the mold for concretes, as well as steams at high temperature resulted in the concretes upon loss of coolant accidents can smoothly be discharged to the outside of the system. (Moriyama, K.)

  13. The ecological value of constructed wetlands for treating urban runoff.

    Science.gov (United States)

    Pankratz, S; Young, T; Cuevas-Arellano-, H; Kumar, R; Ambrose, R F; Suffet, I H

    2007-01-01

    The Sweetwater Authority's urban runoff diversion system (URDS) comprises constructed wetlands on a hillside between the town of Spring Valley and the Sweetwater Reservoir, California, USA. The URDS were designed to divert dry-weather and first-flush urban runoff flows from the Sweetwater reservoir. However, these constructed wetlands have developed into ecologically valuable habitat. This paper evaluates the following ecological questions related to the URDS: (1) the natural development of the species present and their growth pattern; (2) the biodiversity and pollutant stress on the plants and invertebrates; and (3) the question of habitat provided for endangered species. The URDS wetlands are comprised primarily of rush (Scirpus spp.) and cattails (Typha spp.). This vegetative cover ranged from 39-78% of the area of the individual wetland ponds. Current analyses of plant tissues and wetland sediment indicates the importance of sediment sorption for metals and plant uptake of nutrients. Analyses of URDS water following runoff events show the URDS wetlands do reduce the amount of nutrients and metals in the water column. Invertebrate surveys of the wetland ponds revealed lower habitat quality and environmental stress compared to unpolluted natural habitat. The value of the wetlands as wildlife habitat is constrained by low plant biodiversity and pollution stress from the runoff. Since the primary Sweetwater Authority goal is to maintain good water quality for drinking, any secondary utilization of URDS habitat by species (endangered or otherwise) is deemed an added benefit.

  14. Exergy method technical and ecological applications

    CERN Document Server

    Szargut, J

    2005-01-01

    The exergy method makes it possible to detect and quantify the possibilities of improving thermal and chemical processes and systems. The introduction of the concept ""thermo-ecological cost"" (cumulative consumption of non-renewable natural exergy resources) generated large application possibilities of exergy in ecology. This book contains a short presentation on the basic principles of exergy analysis and discusses new achievements in the field over the last 15 years. One of the most important issues considered by the distinguished author is the economy of non-renewable natural exergy.

  15. The development of water quality methods within ecological ...

    African Journals Online (AJOL)

    The development of water quality methods within ecological Reserve ... Water Act (NWA, No 36 of 1998), the ecological Reserve is defined as the quality and quantity ... provide ecologically important flow-related habitat, or geomorphological ...

  16. [Basic theory and research method of urban forest ecology].

    Science.gov (United States)

    He, Xingyuan; Jin, Yingshan; Zhu, Wenquan; Xu, Wenduo; Chen, Wei

    2002-12-01

    With the development of world economy and the increment of urban population, the urban environment problem hinders the urban sustainable development. Now, more and more people realized the importance of urban forests in improving the quality of urban ecology. Therefore, a new subject, urban forest ecology, and correlative new concept frame in the field formed. The theoretic foundation of urban forest ecology derived from the mutual combination of theory relating to forest ecology, landscape ecology, landscape architecture ecology and anthrop-ecology. People survey the development of city from the view of ecosystem, and regard the environment, a colony of human, animals and plants, as main factors of the system. The paper introduces systematically the urban forest ecology as follows: 1) the basic concept of urban forest ecology; 2) the meaning of urban forest ecology; 3) the basic principle and theoretic base of urban forest ecology; 4) the research method of urban forest ecology; 5) the developmental expectation of urban forest ecology.

  17. Methods in gut microbial ecology for ruminants

    International Nuclear Information System (INIS)

    Makkar, H.P.S.; McSweeney, C.S.

    2005-01-01

    This book presents a comprehensive up-to-date account of the methodologies and protocols for conventional and modern molecular techniques that are currently in use for studying the gut microbial ecology of ruminants. Each chapter has been contributed by experts in the field and methods have been presented in a recipe-like format designed for direct practical use in the laboratory and also to provide insight into the most appropriate techniques, their applications and the type of information that could be expected. The techniques and procedures described are also relevant and adaptable to other gastrointestinal ecosystems and the microbiology of anaerobic environments in general. This manual will 'demystify' the methods in molecular microbial ecology for readers who are novice in the field but are excited by the prospects of this technology. It would also be invaluable for the experienced workers striving for giving new dimension to their research - expanding the work in other fields and initiating cross-cutting activities

  18. Construction method for plant facility

    International Nuclear Information System (INIS)

    Ito, Arata; Hirono, Hideharu; Kyoda, Shigeru; Hanawa, Minoru; Sato, Hitoshi

    1998-01-01

    A caisson structure is disposed on a construction site for facilities of nuclear power plants. A digging work is performed below the caisson structure and, simultaneous with the digging work, a construction of a base, construction of plant facilities including a building and installation of plant facility are performed on the caisson structure. Then, the caisson structure is sank together with the structures on a base rock in association with the progress of the digging work and secured on the base rock. When securing them on the base rock, a groove is formed to the base rock along tuyere of the caisson structure so that the tuyere and a ceiling portion of the caisson structure are in direct contact with the base rock. Since the construction for the containing building conducted on the caisson structure is performed simultaneous with the digging work conducted below the caisson structure, the term required for the construction of the plant facilities can greatly reduced. (N.H.)

  19. Economic and ecological assessment of impact of construction and operation of nuclear power plant as large capital construction project with respect to control of national economy development

    International Nuclear Information System (INIS)

    Bucek, M.

    1984-01-01

    The evaluation of costs and environmental impacts of the construction and operation of nuclear power plants is concentrated into two problem areas: 1. the calculation of capital and operation costs for the prevention and minimization of envirommental damage and restoration of the environment, 2. the calculation of damage to the environment of nuclear power plant construction and operation. The ecological cost benefit of capital costs is assessed. In Czechoslovakia there does not exist any method for converting cost effectiveness of investments into environmental protection. This problem is incorporated in the general method of assessing capital cost benefit. The relations are given for total socio-economic capital cost benefit and cost benefit of investments into environmental protection. Ecological investment is not exempted from the investment fund and from the point of view of content may be devided into net and gross ecological investment and from the point of view of time into preventive and compensation ecological investment. In the USSR the method has beem developed of the ecological and economic evaluation of projects for the construction and reconstruction of production units which proceeds from the evaluation of the negative environmental impact of wastes. The basic relations are given of the benefit of ecological investments. (E.S.)

  20. The construction strategy and measures for ecological analysis of China's ports

    Science.gov (United States)

    Zhang, Lu; Zhao, Junjie; Shou, Youping; Wang, Ning; Qiao, Jianzhe; Tian, Mingjing

    2018-04-01

    The Port is an important transport hub, one of the important infrastructure of the national economy, the corresponding regional development has a great role in promoting.The construction of the port has been developed rapidly, but it has also brought about more serious environmental problems. Therefore, this paper discusses the nature of ecological ports, summarized the experience of ecological protection measures on the international advanced ports and port construction ecology. The central idea is to explore the construction of ecological port ideas and development countermeasures.

  1. The Construction of Ecological Agriculture in Gongcheng County and Its Development Ideas

    OpenAIRE

    Zhong, Li-chuan; Zhou, Xiao-huan; Zhang, Hui-na

    2011-01-01

    On the basis of survey of current situations of eco-agricultural construction in Gongcheng County, major “Cultivation + Methane + Planting triple model of ecological agriculture in Gongcheng County is presented. Then, the eco-agricultural benefits of Gongcheng County are analyzed from three aspects, namely economic, social and ecological benefits. Through summing up, the eco-agricultural construction of Gongcheng County has following problems: imperfect ecological technological system; foll...

  2. [Ecological demonstration activity and eco-civilization construction mode: review and prospects].

    Science.gov (United States)

    Mao, Hui-ping; He, Xuan; He, Jia; Niu, Dong-jie; Bao, Cun-kuan

    2013-04-01

    Ecological civilization is to normalize human development behaviors to harmonize the relationships between social and ecological development and eco-environment protection. In this paper, a comparative analysis was made on the ecological demonstration activities of ecological demonstration areas led by the Ministry of Environmental Protection, exemplar cities of national environmental protection, and ecological provinces, cities, and counties. It was considered that all the ecological demonstration activities had the problems of lacking pertinence of construction goals, disordered construction subjects, inefficient construction processes, and lacking continuous incentive mechanisms of assessment. In the meantime, through the analysis of the connotations of eco-civilization, the relationships between eco-civilization and eco-demonstration constructions were approached, and the eco-civilization construction mode was put forward in terms of construction goal, construction subject, and construction processes and assessment. The construction mode included the construction goal based on regional characteristics; the synergistic cooperation of construction subjects, the expanding ways of public participation, and the establishment of evaluation system for comprehensively measuring the 'actions and results'.

  3. Problems of development and ecological construction in terms of design and construction activities in the Volgograd region

    OpenAIRE

    Taranova Anna Valer'evna; Borisova Natal'ja Ivanovna

    2016-01-01

    The analysis of existing problems and the further development of ecological construction in the Volgograd region. Discusses the problem of socio-environmental plan in terms of project construction activities. The necessity of identifying the sources of negative impact on the construction of residential properties, define solutions for their further elimination, the authors show the necessity of using environmental innovation techniques in modern construction industry.

  4. [Principles and methodology for ecological rehabilitation and security pattern design in key project construction].

    Science.gov (United States)

    Chen, Li-Ding; Lu, Yi-He; Tian, Hui-Ying; Shi, Qian

    2007-03-01

    Global ecological security becomes increasingly important with the intensive human activities. The function of ecological security is influenced by human activities, and in return, the efficiency of human activities will also be affected by the patterns of regional ecological security. Since the 1990s, China has initiated the construction of key projects "Yangtze Three Gorges Dam", "Qinghai-Tibet Railway", "West-to-East Gas Pipeline", "West-to-East Electricity Transmission" and "South-to-North Water Transfer" , etc. The interaction between these projects and regional ecological security has particularly attracted the attention of Chinese government. It is not only important for the regional environmental protection, but also of significance for the smoothly implementation of various projects aimed to develop an ecological rehabilitation system and to design a regional ecological security pattern. This paper made a systematic analysis on the types and characteristics of key project construction and their effects on the environment, and on the basis of this, brought forward the basic principles and methodology for ecological rehabilitation and security pattern design in this construction. It was considered that the following issues should be addressed in the implementation of a key project: 1) analysis and evaluation of current regional ecological environment, 2) evaluation of anthropogenic disturbances and their ecological risk, 3) regional ecological rehabilitation and security pattern design, 4) scenario analysis of environmental benefits of regional ecological security pattern, 5) re-optimization of regional ecological system framework, and 6) establishment of regional ecosystem management plan.

  5. Enriching behavioral ecology with reinforcement learning methods.

    Science.gov (United States)

    Frankenhuis, Willem E; Panchanathan, Karthik; Barto, Andrew G

    2018-02-13

    This article focuses on the division of labor between evolution and development in solving sequential, state-dependent decision problems. Currently, behavioral ecologists tend to use dynamic programming methods to study such problems. These methods are successful at predicting animal behavior in a variety of contexts. However, they depend on a distinct set of assumptions. Here, we argue that behavioral ecology will benefit from drawing more than it currently does on a complementary collection of tools, called reinforcement learning methods. These methods allow for the study of behavior in highly complex environments, which conventional dynamic programming methods do not feasibly address. In addition, reinforcement learning methods are well-suited to studying how biological mechanisms solve developmental and learning problems. For instance, we can use them to study simple rules that perform well in complex environments. Or to investigate under what conditions natural selection favors fixed, non-plastic traits (which do not vary across individuals), cue-driven-switch plasticity (innate instructions for adaptive behavioral development based on experience), or developmental selection (the incremental acquisition of adaptive behavior based on experience). If natural selection favors developmental selection, which includes learning from environmental feedback, we can also make predictions about the design of reward systems. Our paper is written in an accessible manner and for a broad audience, though we believe some novel insights can be drawn from our discussion. We hope our paper will help advance the emerging bridge connecting the fields of behavioral ecology and reinforcement learning. Copyright © 2018 The Authors. Published by Elsevier B.V. All rights reserved.

  6. Ecological studies related to construction of the Defense Waste Processing Facility on the Savannah River Site

    International Nuclear Information System (INIS)

    Scott, D.E.; Pechmann, J.H.K.; Knox, J.N.; Estes, R.A.; McGregor, J.H.; Bailey, K.

    1988-12-01

    The Savannah River Ecology Laboratory has completed 10 years of ecological studies related to the construction of the Defense Waste Processing Facility (DWPF) on the Savannah River Site. This progress report examines water quality studies on streams peripheral to the DWPF construction site and examines the effectiveness of ''refuge ponds'' in ameliorating the effects of construction on local amphibians. Individual papers on these topics are indexed separately. 93 refs., 15 figs., 15 tabs

  7. Ecological studies related to construction of the Defense Waste Processing Facility on the Savannah River Site

    Energy Technology Data Exchange (ETDEWEB)

    Scott, D.E.; Pechmann, J.H.K.; Knox, J.N.; Estes, R.A.; McGregor, J.H.; Bailey, K. (ed.)

    1988-12-01

    The Savannah River Ecology Laboratory has completed 10 years of ecological studies related to the construction of the Defense Waste Processing Facility (DWPF) on the Savannah River Site. This progress report examines water quality studies on streams peripheral to the DWPF construction site and examines the effectiveness of refuge ponds'' in ameliorating the effects of construction on local amphibians. Individual papers on these topics are indexed separately. 93 refs., 15 figs., 15 tabs. (MHB)

  8. Experimental study on rapid embankment construction methods

    International Nuclear Information System (INIS)

    Hirano, Hideaki; Egawa, Kikuji; Hyodo, Kazuya; Kannoto, Yasuo; Sekimoto, Tsuyoshi; Kobayashi, Kokichi.

    1982-01-01

    In the construction of a thermal or nuclear power plant in a coastal area, shorter embankment construction period has come to be called for recently. This tendency is remarkable where construction period is limited due to meteorological or sea conditions. To meet this requirement, the authors have been conducting basic experimental studies on two methods for the rapid execution of embankment construction, that is, Steel Plate Cellular Bulkhead Embedding Method and Ship Hull Caisson Method. This paper presents an outline of the results of the experimental study on these two methods. (author)

  9. Qinshan CANDU project open top construction method

    International Nuclear Information System (INIS)

    Petrunik, K.J.; Wittann, K.; Khan, A.; Ricciuti, R.; Ivanov, A.; Chen, S.

    2003-01-01

    The significant schedule reductions achieved on the Qinshan CANDU Project were due in large part to the incorporation of advanced construction technologies in project design and delivery. For the Qinshan Project, a number of key advantages were realized through the use of the 'Open Top' construction method. This paper discusses the Qinshan Phase III CANDU Project Open Top implementation method. The Open Top method allowed major equipment to be installed simply, via the use of a Very Heavy Lift (VHL) crane and permitted the use of large-scale modularization. The advantages of Open Top construction, such as simplified access, more flexible project scheduling, improved construction safety and quality, and reduced labours are presented. The large-scale modularization of the Reactor Building Dousing System and the Open Top installation method and advantages relative to traditional CANDU 6 construction practices are also presented. Finally, major improvements for future CANDU plant construction using the Open Top method are discussed. (author)

  10. Research on university culture construction in the view of ecological idea

    Directory of Open Access Journals (Sweden)

    Wang Xinggang

    2016-01-01

    Full Text Available With the progress of times, our spiritual pursuit becomes higher and higher, and it is especially true among modern youth. Therefore, establishment of university culture has gradually become the focus of attention. This paper firstly quantized university culture construction into four parts: material culture construction, spiritual culture construction, system culture construction, and behavioral culture construction. It then analogized each part as one population in ecological system; established multi-population ecological model; and analyzed the interactional relations between each part. At last, this paper reached conclusions based on multi-population ecological model and analyzed the correlations among various factors of university culture construction, so as to obtain a comprehensive, scientific and healthy scheme for university culture construction.

  11. Research on university culture construction in the view of ecological idea

    OpenAIRE

    Wang Xinggang; Jia Mingwei; Peng Chenggang

    2016-01-01

    With the progress of times, our spiritual pursuit becomes higher and higher, and it is especially true among modern youth. Therefore, establishment of university culture has gradually become the focus of attention. This paper firstly quantized university culture construction into four parts: material culture construction, spiritual culture construction, system culture construction, and behavioral culture construction. It then analogized each part as one population in ecological system; establ...

  12. Justification of system of assessment of ecological safety degree of housing construction objects

    Science.gov (United States)

    Kankhva, Vadim

    2017-10-01

    In article characteristics and properties of competitiveness of housing construction objects are investigated, criteria and points of national systems of ecological building’s standardization are structured, the compliance assessment form on stages of life cycle of a capital construction project is developed. The main indicators of level of ecological safety considering requirements of the international ISO standards 9000 and ISO 14000 and which are based on the basic principles of general quality management (TQM) are presented.

  13. Nondestructive evaluation ultrasonic methods for construction materials

    International Nuclear Information System (INIS)

    Chilibon, I.; Zisu, T.; Raetchi, V.

    2002-01-01

    The paper presents some ultrasonic methods for evaluation of physical-mechanical properties of construction materials (bricks, concrete, BCA), such as: pulse method, examination methods, and direct measurement of the propagation velocity and impact-echo method. Utilizing these nondestructive evaluation ultrasonic methods it can be determined the main material parameters and material characteristics (elasticity coefficients, density, propagation velocity, ultrasound attenuation, etc.) of construction materials. These method are suitable for construction materials because the defectoscopy methods for metallic materials cannot be utilized, due to its rugged and non-homogeneous structures and grate attenuation coefficients of ultrasound propagation through materials. Also, the impact-echo method is a technique for flaw detection in concrete based on stress wave propagation. Studies have shown that the impact-echo method is effective for locating voids, honeycombing, delaminating, depth of surface opening cracks, and measuring member thickness

  14. Adopting an ecological view of metropolitan landscape: the case of "three circles" system for ecological construction and restoration in Beijing area.

    Science.gov (United States)

    Zhang, Feng; Zhang, Xin-shi

    2004-01-01

    Ecological construction and restoration for sustainable development are now a driving paradigm. It is increasingly recognized that ecological principles, especially landscape ecology theory, are not only necessary but also essential to maintain the long-term sustainability worldwide. Key landscape ecology principles-element, structure and process, dynamics, heterogeneity, hierarchies, connectivity, place and time were reviewed, and use Beijing area as a case study to illustrate how these principles might be applied to ecological construction and restoration, to eventually achieve sustainability. An example to more effectively incorporate the ecological principles in sustainable planning in China was presented.

  15. Environmentally friendly planning and construction - ecological aspects; Unweltschonendes Planen und Bauen - oekologische Aspekte

    Energy Technology Data Exchange (ETDEWEB)

    Boos, H.J. [Bundesministerium fuer Raumordnung, Bauwesen und Staedtebau, Bonn (Germany)

    1995-09-01

    The author of the present lecture deals with the change in ecological awareness and its influence on construction. The following topics are covered: The starting situation as seen from today; political tasks, ecology and architecture; air pollution control and energy conservation; building materials and ecology; healthy construction concepts and healthy living. (HW) [Deutsch] Der Verfasser setzt sich in seinem Vortrag auseinander mit der Veraenderung im oekologischen Bewusstsein und der Auswirkung auf das Bauen. Inhalt: - Ausgangsituation aus heutiger Sicht - politische Aufgaben - Oekologie und Architektur - Immisionsschutz und Energieeinsparung - Baustoff und Oekologie - gesundes Bauen und Wohnen. (HW)

  16. Analysis of the Construction of Ecological Civilization in the Western Ethnic Areas

    Institute of Scientific and Technical Information of China (English)

    Wang Yongli

    2017-01-01

    Ecological civilization is a mode of civilization which is constructed on the concept of multiple-wins, such as economic benefit, social benefit and environmental benefit, etc. It requires that a harmonious relationship between man and nature permeate various aspects of civilization, such as material civilization, spiritual civilization, and political civilization, forming an ecological mode for production, living, consumption, and other behaviors. The theories and practices of eco ̄logical civilization both at home and abroad, as well as the strategic planning for the construction of ecological civilization in China, have constituted important theoretical and practical guidelines for the construction of ecological civilization in the western ethnic areas of China. Constructing ecological civilization in the western ethnic areas has important theoretical and practical significance. Compared with the eastern part of China or the whole country, the level of e ̄conomic and social development in the western eth ̄nic areas still lags behind; energy consumption is generally high , and the number of national key ecologically functional areas is large. Furthermore, these areas face a daunting task for their environ ̄mental protection and energy saving. In addition, the most concentrated areas of desertification in China are found in the western ethnic areas, espe ̄cially Xinjiang, Inner Mongolia, Tibet and Qing ̄hai. Therefore, the construction of ecological civi ̄lization in the western ethnic areas has an impor ̄tant role for the sustainable development of the e ̄conomy and society, ecological security, energy saving and emission reduction, and the prevention of land desertification. Generally speaking, the western ethnic areas actively participate in the national demonstration areas of the construction of ecological civilization, and constantly improve the level of ecological civi ̄lization construction. However, their overall level is low, and the

  17. [Measuring water ecological carrying capacity with the ecosystem-service-based ecological footprint (ESEF) method: Theory, models and application].

    Science.gov (United States)

    Jiao, Wen-jun; Min, Qing-wen; Li, Wen-hua; Fuller, Anthony M

    2015-04-01

    Integrated watershed management based on aquatic ecosystems has been increasingly acknowledged. Such a change in the philosophy of water environment management requires recognizing the carrying capacity of aquatic ecosystems for human society from a more general perspective. The concept of the water ecological carrying capacity is therefore put forward, which considers both water resources and water environment, connects socio-economic development to aquatic ecosystems and provides strong support for integrated watershed management. In this paper, the authors proposed an ESEF-based measure of water ecological carrying capacity and constructed ESEF-based models of water ecological footprint and capacity, aiming to evaluate water ecological carrying capacity with footprint methods. A regional model of Taihu Lake Basin was constructed and applied to evaluate the water ecological carrying capacity in Changzhou City which located in the upper reaches of the basin. Results showed that human demand for water ecosystem services in this city had exceeded the supply capacity of local aquatic ecosystems and the significant gap between demand and supply had jeopardized the sustainability of local aquatic ecosystems. Considering aqua-product provision, water supply and pollutant absorption in an integrated way, the scale of population and economy aquatic ecosystems in Changzhou could bear only 54% of the current status.

  18. EVALUATION OF ECOLOGICAL AND ECONOMIC EFFICIENCY OF STEEL-MAKING SLAG IN ROAD CONSTRUCTION

    Directory of Open Access Journals (Sweden)

    A. K. Коstenkо

    2008-01-01

    Full Text Available The paper provides an estimation of ecological and economic efficiency of utilization of the electric steel-melting slag of the Belarussian Steel Works in the road construction. The obtained results  give us a reason to consider that involvement of this type of industrial waste into economic turnover is an economically expedient and ecologically justified measure that will allow road-construction enterprises to reduce the cost of installation and construction works and enlarge their resource potential as well as to help the producer of wastes to release funds for innovation development and solve the problem of waste accumulation in the near future.

  19. Bacterial signaling ecology and potential applications during aquatic biofilm construction.

    Science.gov (United States)

    Vega, Leticia M; Alvarez, Pedro J; McLean, Robert J C

    2014-07-01

    In their natural environment, bacteria and other microorganisms typically grow as surface-adherent biofilm communities. Cell signal processes, including quorum signaling, are now recognized as being intimately involved in the development and function of biofilms. In contrast to their planktonic (unattached) counterparts, bacteria within biofilms are notoriously resistant to many traditional antimicrobial agents and so represent a major challenge in industry and medicine. Although biofilms impact many human activities, they actually represent an ancient mode of bacterial growth as shown in the fossil record. Consequently, many aquatic organisms have evolved strategies involving signal manipulation to control or co-exist with biofilms. Here, we review the chemical ecology of biofilms and propose mechanisms whereby signal manipulation can be used to promote or control biofilms.

  20. Quantitative analysis method for ship construction quality

    Directory of Open Access Journals (Sweden)

    FU Senzong

    2017-03-01

    Full Text Available The excellent performance of a ship is assured by the accurate evaluation of its construction quality. For a long time, research into the construction quality of ships has mainly focused on qualitative analysis due to a shortage of process data, which results from limited samples, varied process types and non-standardized processes. Aiming at predicting and controlling the influence of the construction process on the construction quality of ships, this article proposes a reliability quantitative analysis flow path for the ship construction process and fuzzy calculation method. Based on the process-quality factor model proposed by the Function-Oriented Quality Control (FOQC method, we combine fuzzy mathematics with the expert grading method to deduce formulations calculating the fuzzy process reliability of the ordinal connection model, series connection model and mixed connection model. The quantitative analysis method is applied in analyzing the process reliability of a ship's shaft gear box installation, which proves the applicability and effectiveness of the method. The analysis results can be a useful reference for setting key quality inspection points and optimizing key processes.

  1. Construction of the Savannah River Ecology Laboratory Conference Center

    International Nuclear Information System (INIS)

    1993-07-01

    This Environmental Assessment (EA) reviews the environmental consequences associated with the proposed action of granting a site use permit to construct and operate a conference center on an approximately 70-acre tract of land on the Savannah River Site (SRS). While the proposed action requires an administrative decision by DOE, this EA reviews the linked action of physically constructing and operating a conference center. The SRS is a DOE-owned nuclear production facility encompassing approximately 200,000 acres in southwestern South Carolina. The proposed conference center would have an area of approximately 4,000 square feet, and would infrequently accommodate as many as 150 people, with the average being about 20 people per day. In addition to the No-Action alternative, under which the Research Foundation would not require the 70-acre tract of SRS land for a conference center, this EA considers site preservation. Under Site Preservation only minimal activities necessary to the SRS mission would occur, thereby establishing the lower limits of environmental consequences. A review conducted under the SRS permitting process identified no other forms of possible site development. Similarly, SRS areas identified in the Nuclear Complex Reconfiguration Site Proposal (DOE, 199la) do not include the conference center site area in proposed weapons complex reconfiguration activities. As a consequence, this EA does not consider other forms of possible site development as alternatives. The potential environmental consequences associated with the action of constructing and operating a conference center include impacts to cultural resources and impacts from construction activities, primarily related to land clearing (5 to 10 acres) and providing access to the site

  2. Ecological performance of construction materials subject to ocean climate change.

    Science.gov (United States)

    Davis, Kay L; Coleman, Melinda A; Connell, Sean D; Russell, Bayden D; Gillanders, Bronwyn M; Kelaher, Brendan P

    2017-10-01

    Artificial structures will be increasingly utilized to protect coastal infrastructure from sea-level rise and storms associated with climate change. Although it is well documented that the materials comprising artificial structures influence the composition of organisms that use them as habitat, little is known about how these materials may chemically react with changing seawater conditions, and what effects this will have on associated biota. We investigated the effects of ocean warming, acidification, and type of coastal infrastructure material on algal turfs. Seawater acidification resulted in greater covers of turf, though this effect was counteracted by elevated temperatures. Concrete supported a greater cover of turf than granite or high-density polyethylene (HDPE) under all temperature and pH treatments, with the greatest covers occurring under simulated ocean acidification. Furthermore, photosynthetic efficiency under acidification was greater on concrete substratum compared to all other materials and treatment combinations. These results demonstrate the capacity to maximise ecological benefits whilst still meeting local management objectives when engineering coastal defense structures by selecting materials that are appropriate in an ocean change context. Therefore, mitigation efforts to offset impacts from sea-level rise and storms can also be engineered to alter, or even reduce, the effects of climatic change on biological assemblages. Copyright © 2017 Elsevier Ltd. All rights reserved.

  3. Ecological effects of feral biofuel crops in constructed oak ...

    Science.gov (United States)

    The effects of elevated temperatures and drought on constructed oak savannahs were studied to determine the interactive effects of potentially invasive feral biofuel species and climate change on native grassland communities. A total of 12 sunlit mesocosm were used. Each mesocosm held three tubs. One had six native plant species; one had five native species with the annual crop Sorghum bicolor and one had five native species along with the weedy perennial Sorghum halepense. The experimental treatments were ambient (control), elevated temperature, drought, or a combination of elevated temperature and drought. Total aboveground biomass of the community was greatest in the control and drought treatments, lowest with elevated temperature + drought, and intermediate in high temperature treatments (Pbacterial biomass. Active bacterial biomass was lowest in the drought and elevated temperature and drought treatments (P<0.05). Active soil fungal biomass was highest in the tubs containing S. bicolor. Percent total carbon in the soil increased between 2010 and 2011 (P=0.0054); it was lowest in the elevated temperature and drought mesocosms (P<0.05). Longer term studi

  4. Applied systems ecology: models, data, and statistical methods

    Energy Technology Data Exchange (ETDEWEB)

    Eberhardt, L L

    1976-01-01

    In this report, systems ecology is largely equated to mathematical or computer simulation modelling. The need for models in ecology stems from the necessity to have an integrative device for the diversity of ecological data, much of which is observational, rather than experimental, as well as from the present lack of a theoretical structure for ecology. Different objectives in applied studies require specialized methods. The best predictive devices may be regression equations, often non-linear in form, extracted from much more detailed models. A variety of statistical aspects of modelling, including sampling, are discussed. Several aspects of population dynamics and food-chain kinetics are described, and it is suggested that the two presently separated approaches should be combined into a single theoretical framework. It is concluded that future efforts in systems ecology should emphasize actual data and statistical methods, as well as modelling.

  5. The Impact of Ecological Construction Programs on Grassland Conservation in Inner Mongolia, China

    NARCIS (Netherlands)

    Liu, Min; Dries, Liesbeth; Heijman, Wim; Huang, Jikun; Zhu, Xueqin; Hu, Yuanning; Chen, Haibin

    2018-01-01

    A series of Ecological Construction Programs have been initiated to protect the condition of grasslands in China during recent decades. However, grassland degradation is still severe, and conditions have not been restored as intended. This paper aims to empirically examine the effectiveness of these

  6. Ecological monitoring of the construction phase of the Cold Northcott wind farm

    International Nuclear Information System (INIS)

    Hocking, S.

    1994-01-01

    This report outlines the advice provided during the pre-construction and construction periods and presents the results of the monitoring carried out over the whole construction period. The advice given aimed to ensure that the ecologically important areas, previously identified, were unaffected by the development. Where effects were unavoidable, the advice aimed to ensure that these were minimised and the monitoring undertaken quantified any damage that occurred. Monitoring of the recovery of affected areas also formed an important part of this study and provides valuable information for minimising the effects of similar developments in the future. (author)

  7. Construction of an adaptable European transnational ecological deprivation index: the French version.

    Science.gov (United States)

    Pornet, Carole; Delpierre, Cyrille; Dejardin, Olivier; Grosclaude, Pascale; Launay, Ludivine; Guittet, Lydia; Lang, Thierry; Launoy, Guy

    2012-11-01

    Studying social disparities in health implies the ability to measure them accurately, to compare them between different areas or countries and to follow trends over time. This study proposes a method for constructing a French European deprivation index, which will be replicable in several European countries and is related to an individual deprivation indicator constructed from a European survey specifically designed to study deprivation. Using individual data from the European Union Statistics on Income and Living Conditions survey, goods/services indicated by individuals as being fundamental needs, the lack of which reflect deprivation, were selected. From this definition, which is specific to a cultural context, an individual deprivation indicator was constructed by selecting fundamental needs associated both with objective and subjective poverty. Next, the authors selected among variables available both in the European Union Statistics on Income and Living Conditions survey and French national census those best reflecting individual experience of deprivation using multivariate logistic regression. An ecological measure of deprivation was provided for all the smallest French geographical units. Preliminary validation showed a higher association between the French European Deprivation Index (EDI) score and both income and education than the Townsend index, partly ensuring its ability to measure individual socioeconomic status. This index, which is specific to a particular cultural and social policy context, could be replicated in 25 other European countries, thereby allowing European comparisons. EDI could also be reproducible over time. EDI could prove to be a relevant tool in evidence-based policy-making for measuring and reducing social disparities in health issues and even outside the medical domain.

  8. [Construction and optimization of ecological network for nature reserves in Fujian Province, China].

    Science.gov (United States)

    Gu, Fan; Huang, Yi Xiong; Chen, Chuan Ming; Cheng, Dong Liang; Guo, Jia Lei

    2017-03-18

    The nature reserve is very important to biodiversity maintenance. However, due to the urbanization, the nature reserve has been fragmented with reduction in area, leading to the loss of species diversity. Establishing ecological network can effectively connect the fragmented habitats and plays an important role in species conversation. In this paper, based on deciding habitat patches and the landscape cost surface in ArcGIS, a minimum cumulative resistance model was used to simulate the potential ecological network of Fujian provincial nature reserves. The connectivity and importance of network were analyzed and evaluated based on comparison of connectivity indices (including the integral index of connectivity and probability of connectivity) and gravity model both before and after the potential ecological network construction. The optimum ecological network optimization measures were proposed. The result demonstrated that woodlands, grasslands and wetlands together made up the important part of the nature reserve ecological network. The habitats with large area had a higher degree of importance in the network. After constructing the network, the connectivity level was significantly improved. Although interaction strength between different patches va-ried greatly, the corridors between patches with large interaction were very important. The research could provide scientific reference and basis for nature protection and planning in Fujian Province.

  9. Research on Ecological Civilization Construction and Environmental Sustainable Development in the New Era

    Science.gov (United States)

    Xiang-chao, Pan

    2018-05-01

    After the 19th National Congress of the Communist Party of China, the Socialism with Chinese Characteristics entered a new era. However, the contradiction between China’s economic and social development and the sustainable development of environment is still outstanding. That is mainly due to the fact that China pays some attention to the economic development but neglects the ecological protection to a certain extent. In the report of the 19th National Congress of the Communist Party of China, it is clearly proposed that it is necessary to adhere to the harmonious coexistence between man and nature, and to establish the concept of green development firmly, focusing on solving the problem of the environmental pollution and destruction and other outstanding issues, and strengthening the construction of the ecological environment supervision system, and the legal guarantee of the construction of ecological civilization. Only by adhering to the concept of ecological civilization in the new era can we finally realize the fundamental improvement of ecological environment.

  10. Commutative algebra constructive methods finite projective modules

    CERN Document Server

    Lombardi, Henri

    2015-01-01

    Translated from the popular French edition, this book offers a detailed introduction to various basic concepts, methods, principles, and results of commutative algebra. It takes a constructive viewpoint in commutative algebra and studies algorithmic approaches alongside several abstract classical theories. Indeed, it revisits these traditional topics with a new and simplifying manner, making the subject both accessible and innovative. The algorithmic aspects of such naturally abstract topics as Galois theory, Dedekind rings, Prüfer rings, finitely generated projective modules, dimension theory of commutative rings, and others in the current treatise, are all analysed in the spirit of the great developers of constructive algebra in the nineteenth century. This updated and revised edition contains over 350 well-arranged exercises, together with their helpful hints for solution. A basic knowledge of linear algebra, group theory, elementary number theory as well as the fundamentals of ring and module theory is r...

  11. Feature Vector Construction Method for IRIS Recognition

    Science.gov (United States)

    Odinokikh, G.; Fartukov, A.; Korobkin, M.; Yoo, J.

    2017-05-01

    One of the basic stages of iris recognition pipeline is iris feature vector construction procedure. The procedure represents the extraction of iris texture information relevant to its subsequent comparison. Thorough investigation of feature vectors obtained from iris showed that not all the vector elements are equally relevant. There are two characteristics which determine the vector element utility: fragility and discriminability. Conventional iris feature extraction methods consider the concept of fragility as the feature vector instability without respect to the nature of such instability appearance. This work separates sources of the instability into natural and encodinginduced which helps deeply investigate each source of instability independently. According to the separation concept, a novel approach of iris feature vector construction is proposed. The approach consists of two steps: iris feature extraction using Gabor filtering with optimal parameters and quantization with separated preliminary optimized fragility thresholds. The proposed method has been tested on two different datasets of iris images captured under changing environmental conditions. The testing results show that the proposed method surpasses all the methods considered as a prior art by recognition accuracy on both datasets.

  12. Creating multithemed ecological regions for macroscale ecology: Testing a flexible, repeatable, and accessible clustering method

    Science.gov (United States)

    Cheruvelil, Kendra Spence; Yuan, Shuai; Webster, Katherine E.; Tan, Pang-Ning; Lapierre, Jean-Francois; Collins, Sarah M.; Fergus, C. Emi; Scott, Caren E.; Norton Henry, Emily; Soranno, Patricia A.; Filstrup, Christopher T.; Wagner, Tyler

    2017-01-01

    Understanding broad-scale ecological patterns and processes often involves accounting for regional-scale heterogeneity. A common way to do so is to include ecological regions in sampling schemes and empirical models. However, most existing ecological regions were developed for specific purposes, using a limited set of geospatial features and irreproducible methods. Our study purpose was to: (1) describe a method that takes advantage of recent computational advances and increased availability of regional and global data sets to create customizable and reproducible ecological regions, (2) make this algorithm available for use and modification by others studying different ecosystems, variables of interest, study extents, and macroscale ecology research questions, and (3) demonstrate the power of this approach for the research question—How well do these regions capture regional-scale variation in lake water quality? To achieve our purpose we: (1) used a spatially constrained spectral clustering algorithm that balances geospatial homogeneity and region contiguity to create ecological regions using multiple terrestrial, climatic, and freshwater geospatial data for 17 northeastern U.S. states (~1,800,000 km2); (2) identified which of the 52 geospatial features were most influential in creating the resulting 100 regions; and (3) tested the ability of these ecological regions to capture regional variation in water nutrients and clarity for ~6,000 lakes. We found that: (1) a combination of terrestrial, climatic, and freshwater geospatial features influenced region creation, suggesting that the oft-ignored freshwater landscape provides novel information on landscape variability not captured by traditionally used climate and terrestrial metrics; and (2) the delineated regions captured macroscale heterogeneity in ecosystem properties not included in region delineation—approximately 40% of the variation in total phosphorus and water clarity among lakes was at the regional

  13. Method of construction spatial transition curve

    Directory of Open Access Journals (Sweden)

    S.V. Didanov

    2013-04-01

    Full Text Available Purpose. The movement of rail transport (speed rolling stock, traffic safety, etc. is largely dependent on the quality of the track. In this case, a special role is the transition curve, which ensures smooth insertion of the transition from linear to circular section of road. The article deals with modeling of spatial transition curve based on the parabolic distribution of the curvature and torsion. This is a continuation of research conducted by the authors regarding the spatial modeling of curved contours. Methodology. Construction of the spatial transition curve is numerical methods for solving nonlinear integral equations, where the initial data are taken coordinate the starting and ending points of the curve of the future, and the inclination of the tangent and the deviation of the curve from the tangent plane at these points. System solutions for the numerical method are the partial derivatives of the equations of the unknown parameters of the law of change of torsion and length of the transition curve. Findings. The parametric equations of the spatial transition curve are calculated by finding the unknown coefficients of the parabolic distribution of the curvature and torsion, as well as the spatial length of the transition curve. Originality. A method for constructing the spatial transition curve is devised, and based on this software geometric modeling spatial transition curves of railway track with specified deviations of the curve from the tangent plane. Practical value. The resulting curve can be applied in any sector of the economy, where it is necessary to ensure a smooth transition from linear to circular section of the curved space bypass. An example is the transition curve in the construction of the railway line, road, pipe, profile, flat section of the working blades of the turbine and compressor, the ship, plane, car, etc.

  14. Screening-Level Ecological Risk Assessment Methods, Revision 3

    Energy Technology Data Exchange (ETDEWEB)

    Mirenda, Richard J. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2012-08-16

    This document provides guidance for screening-level assessments of potential adverse impacts to ecological resources from release of environmental contaminants at the Los Alamos National Laboratory (LANL or the Laboratory). The methods presented are based on two objectives, namely: to provide a basis for reaching consensus with regulators, managers, and other interested parties on how to conduct screening-level ecological risk investigations at the Laboratory; and to provide guidance for ecological risk assessors under the Environmental Programs (EP) Directorate. This guidance promotes consistency, rigor, and defensibility in ecological screening investigations and in reporting those investigation results. The purpose of the screening assessment is to provide information to the risk managers so informed riskmanagement decisions can be made. This document provides examples of recommendations and possible risk-management strategies.

  15. METHOD OF CONSTRUCTION OF GENETIC DATA CLUSTERS

    Directory of Open Access Journals (Sweden)

    N. A. Novoselova

    2016-01-01

    Full Text Available The paper presents a method of construction of genetic data clusters (functional modules using the randomized matrices. To build the functional modules the selection and analysis of the eigenvalues of the gene profiles correlation matrix is performed. The principal components, corresponding to the eigenvalues, which are significantly different from those obtained for the randomly generated correlation matrix, are used for the analysis. Each selected principal component forms gene cluster. In a comparative experiment with the analogs the proposed method shows the advantage in allocating statistically significant different-sized clusters, the ability to filter non- informative genes and to extract the biologically interpretable functional modules matching the real data structure.

  16. ECOLOGICAL REGIONALIZATION METHODS OF OIL PRODUCING AREAS

    Directory of Open Access Journals (Sweden)

    Inna Ivanovna Pivovarova

    2017-01-01

    Full Text Available The paper analyses territory zoning methods with varying degrees of anthropogenic pollution risk. The summarized results of spatial analysis of oil pollution of surface water in the most developed oil-producing region of Russia. An example of GIS-zoning according to the degree of environmental hazard is presented. All possible algorithms of cluster analysis are considered for isolation of homogeneous data structures. The conclusion is made on the benefits of using combined methods of analysis for assessing the homogeneity of specific environmental characteristics in selected territories.

  17. [Remote sensing analysis of ecological change caused by construction of the new island city: Pingtan Comprehensive Experimental Zone, Fujian Province].

    Science.gov (United States)

    Wen, Xiao-le; Lin, Zheng-feng; Tang, Fei

    2015-02-01

    Pingtan Island was officially established as the 'Pingtan Comprehensive Experimental Zone of Fujian' in 2010, and it led to a surge of construction in the island city. Based on the Landsat-5 images for 2007 and the latest Landsat-8 images for 2013, this paper studied the ecological status, the temporal trends of the ecological changes and the reasons for those changes in Pingtan Comprehensive Experimental Zone at its early stage of construction, by using the remote sensing of ecological index (RSEI). The results showed that as an ecologically fragile area, Pingtan Island had a moderate level of overall ecological status. In the early construction period (from 2007 to 2013), the ecological status of the island showed a downward trend, with a 14% drop of RSEI from 0.511 in 2007 down to 0.450 in 2013, and approximately 36.5% of the area of the island faced the degradation of ecological status, which mainly occurred in the central and southwestern parts of the island. The reason for the degradation was mainly due to the large-scale construction which further damaged the scarce vegetation on the island. Therefore, in order to curb the downward trend of the ecological quality of Pingtan Comprehensive Experimental Zone, some effective ecological protection measures must be developed and implemented during the construction.

  18. Ecological consequences of human niche construction: Examining long-term anthropogenic shaping of global species distributions.

    Science.gov (United States)

    Boivin, Nicole L; Zeder, Melinda A; Fuller, Dorian Q; Crowther, Alison; Larson, Greger; Erlandson, Jon M; Denham, Tim; Petraglia, Michael D

    2016-06-07

    The exhibition of increasingly intensive and complex niche construction behaviors through time is a key feature of human evolution, culminating in the advanced capacity for ecosystem engineering exhibited by Homo sapiens A crucial outcome of such behaviors has been the dramatic reshaping of the global biosphere, a transformation whose early origins are increasingly apparent from cumulative archaeological and paleoecological datasets. Such data suggest that, by the Late Pleistocene, humans had begun to engage in activities that have led to alterations in the distributions of a vast array of species across most, if not all, taxonomic groups. Changes to biodiversity have included extinctions, extirpations, and shifts in species composition, diversity, and community structure. We outline key examples of these changes, highlighting findings from the study of new datasets, like ancient DNA (aDNA), stable isotopes, and microfossils, as well as the application of new statistical and computational methods to datasets that have accumulated significantly in recent decades. We focus on four major phases that witnessed broad anthropogenic alterations to biodiversity-the Late Pleistocene global human expansion, the Neolithic spread of agriculture, the era of island colonization, and the emergence of early urbanized societies and commercial networks. Archaeological evidence documents millennia of anthropogenic transformations that have created novel ecosystems around the world. This record has implications for ecological and evolutionary research, conservation strategies, and the maintenance of ecosystem services, pointing to a significant need for broader cross-disciplinary engagement between archaeology and the biological and environmental sciences.

  19. An ecological method to understand agricultural standardization in peach orchard ecosystems.

    Science.gov (United States)

    Wan, Nian-Feng; Zhang, Ming-Yi; Jiang, Jie-Xian; Ji, Xiang-Yun; Hao-Zhang

    2016-02-22

    While the worldwide standardization of agricultural production has been advocated and recommended, relatively little research has focused on the ecological significance of such a shift. The ecological concerns stemming from the standardization of agricultural production may require new methodology. In this study, we concentrated on how ecological two-sidedness and ecological processes affect the standardization of agricultural production which was divided into three phrases (pre-, mid- and post-production), considering both the positive and negative effects of agricultural processes. We constructed evaluation indicator systems for the pre-, mid- and post-production phases and here we presented a Standardization of Green Production Index (SGPI) based on the Full Permutation Polygon Synthetic Indicator (FPPSI) method which we used to assess the superiority of three methods of standardized production for peaches. The values of SGPI for pre-, mid- and post-production were 0.121 (Level IV, "Excellent" standard), 0.379 (Level III, "Good" standard), and 0.769 × 10(-2) (Level IV, "Excellent" standard), respectively. Here we aimed to explore the integrated application of ecological two-sidedness and ecological process in agricultural production. Our results are of use to decision-makers and ecologists focusing on eco-agriculture and those farmers who hope to implement standardized agricultural production practices.

  20. Ecological studies related to construction of the Defense Waste Processing Facility on the Savannah River Site

    Energy Technology Data Exchange (ETDEWEB)

    Pechmann, J.H.K.; Scott, D.E.; McGregor, J.H.; Estes, R.A.; Chazal, A.C.

    1993-02-01

    The Defense Waste Processing Facility (DWPF) was built on the Savannah River Site (SRS) during the mid-1980's. The Savannah River Ecology Laboratory (SREL) has completed 12 years of ecological studies related to the construction of the DWPF complex. Prior to construction, the 600-acre site (S-Area) contained a Carolina bay and the headwaters of a stream. Research conducted by the SREL has focused primarily on four questions related to these wetlands: (1) Prior to construction, what fauna and flora were present at the DWPF site and at similar, yet undisturbed, alternative sites (2) By comparing the Carolina bay at the DWPF site (Sun Bay) with an undisturbed control Carolina bay (Rainbow Bay), what effect is construction having on the organisms that inhabited the DWPF site (3) By comparing control streams with streams on the periphery of the DWPF site, what effect is construction having on the peripheral streams (4) How effective have efforts been to lessen the impacts of construction, both with respect to erosion control measures and the construction of refuge ponds'' as alternative breeding sites for amphibians that formerly bred at Sun Bay Through the long-term census-taking of biota at the DWPF site and Rainbow Bay, SREL has begun to evaluate the impact of construction on the biota and the effectiveness of mitigation efforts. Similarly, the effects of erosion from the DWPF site on the water quality of S-Area peripheral streams are being assessed. This research provides supporting data relevant to the National Environmental Policy Act (NEPA) of 1969, the Endangered Species Act of 1973, Executive Orders 11988 (Floodplain Management) and 11990 (Protection of Wetlands), and United States Department of Energy (DOE) Guidelines for Compliance with Floodplain/Wetland Environmental Review Requirements (10CFR1022).

  1. Method of constructing an improved electrochemical cell

    Science.gov (United States)

    Grimes, Patrick G.; Einstein, Harry

    1984-10-09

    An electrochemical cell construction features a novel co-extruded plastic electrode in an interleaved construction with a novel integral separator-spacer. Also featured is a leak and impact resistant construction for preventing the spill of corrosive materials in the event of rupture.

  2. Ecological Vulnerability Assessment Based on Fuzzy Analytical Method and Analytic Hierarchy Process in Yellow River Delta.

    Science.gov (United States)

    Wu, Chunsheng; Liu, Gaohuan; Huang, Chong; Liu, Qingsheng; Guan, Xudong

    2018-04-25

    The Yellow River Delta (YRD), located in Yellow River estuary, is characterized by rich ecological system types, and provides habitats or migration stations for wild birds, all of which makes the delta an ecological barrier or ecotone for inland areas. Nevertheless, the abundant natural resources of YRD have brought huge challenges to the area, and frequent human activities and natural disasters have damaged the ecological systems seriously, and certain ecological functions have been threatened. Therefore, it is necessary to determine the status of the ecological environment based on scientific methods, which can provide scientifically robust data for the managers or stakeholders to adopt timely ecological protection measures. The aim of this study was to obtain the spatial distribution of the ecological vulnerability (EV) in YRD based on 21 indicators selected from underwater status, soil condition, land use, landform, vegetation cover, meteorological conditions, ocean influence, and social economy. In addition, the fuzzy analytic hierarchy process (FAHP) method was used to obtain the weights of the selected indicators, and a fuzzy logic model was constructed to obtain the result. The result showed that the spatial distribution of the EV grades was regular, while the fuzzy membership of EV decreased gradually from the coastline to inland area, especially around the river crossing, where it had the lowest EV. Along the coastline, the dikes had an obviously protective effect for the inner area, while the EV was higher in the area where no dikes were built. This result also showed that the soil condition and groundwater status were highly related to the EV spatially, with the correlation coefficients −0.55 and −0.74 respectively, and human activities had exerted considerable pressure on the ecological environment.

  3. Niche construction through phenological plasticity: life history dynamics and ecological consequences.

    Science.gov (United States)

    Donohue, Kathleen

    2005-04-01

    The ability of an organism to alter the environment that it experiences has been termed 'niche construction'. Plants have several ways whereby they can determine the environment to which they are exposed at different life stages. This paper discusses three of these: plasticity in dispersal, flowering timing and germination timing. It reviews pathways through which niche construction alters evolutionary and ecological trajectories by altering the selective environment to which organisms are exposed, the phenotypic expression of plastic characters, and the expression of genetic variation. It provides examples whereby niche construction creates positive or negative feedbacks between phenotypes and environments, which in turn cause novel evolutionary constraints and novel life-history expression. Copyright New Phytologist (2005).

  4. The use of modern measurement techniques for designing pro ecological constructions

    Science.gov (United States)

    Wieczorowski, Michał; Gapiński, Bartosz; Szymański, Maciej; Rękas, Artur

    2017-10-01

    In the paper some possibilities of application modern length and angle metrology techniques to design constructions that support ecology were presented. The paper is based on a project where a lighter bus and train car seat was developed. Different options were presented including static and dynamic photogrammetry, computed tomography and thermography. Research related with dynamic behaviour of designed structures gave input to determine deformation of a seat and passengers sitting on it during communication accidents. Works connected to strength of construction elements made it possible to optimize its dimensions maintaining proper durability. Metrological actions taken in relation to production machines and equipment enabled to better recognize phenomena that take place during manufacturing process and to correct its parameters, what in turns also contributed to slim down the construction.

  5. REVIEW OF INTERNATIONAL PROJECTS IN А FIELD OF HUMAN MICROBIAL ECOLOGY AND CONSTRUCTION OF PROBIOTICS

    Directory of Open Access Journals (Sweden)

    S. A. Starovoitova

    2013-06-01

    Full Text Available Modern huge and world-wide known projects concerning studying of human microbial ecology and construction of probiotics, particularly: Society for Microbial Ecology and Disease, Probiotics & Health Targeted Initiative of International Science and Technology Center (TI PROBIO ISTC, Human Microbiome Project of National Institutes of Health, MetaHIT Project (Metagenomics of the Human Intestinal Tract of European Commission, Human Metabolome Project of Canadian University of Alberta and some more else were characterized in the article. Brief historical information and reference to official sites of every discussed project were given. Main goals and tasks of every project were described. Short characteristic of discussed projects and also modern accessible results of researches were given. Importance of every examined project for widening scientific knowledge in the field of human microbial ecology and also for improvement and/or for construction of modern effective probiotics on basis of human normal intestinal microflora were paid attention. Close interaction of scientific data received by realization of every discussed project was shown.

  6. Evaluation of stream crossing methods prior to gas pipeline construction

    International Nuclear Information System (INIS)

    Murphy, M.H.; Rogers, J.S.; Ricca, A.

    1995-01-01

    Stream surveys are conducted along proposed gas pipeline routes prior to construction to assess potential impacts to stream ecosystems and to recommend preferred crossing methods. Recently, there has been a high level of scrutiny from the Public Service Commission (PSC) to conduct these stream crossings with minimal effects to the aquatic community. PSC's main concern is the effect of sediment on aquatic biota. Smaller, low flowing or intermittent streams are generally crossed using a wet crossing technique. This technique involves digging a trench for the pipeline while the stream is flowing. Sediment control measures are used to reduce sediment loads downstream. Wider, faster flowing, or protected streams are typically crossed with a dry crossing technique. A dry crossing involves placing a barrier upstream of the crossing and diverting the water around the crossing location. The pipeline trench is then dug in the dry area. O'Brien and Gere and NYSEG have jointly designed a modified wet crossing for crossing streams that exceed maximum flows for a dry crossing, and are too wide for a typical wet crossing. This method diverts water around the crossing using a pumping system, instead of constructing a dam. The trench is similar to a wet crossing, with sediment control devices in place upstream and downstream. If streams are crossed during low flow periods, the pumping system will be able to reduce the majority of water flow and volume form the crossing area, thereby reducing ecological impacts. Evaluation of effects of this crossing type on the stream biota are currently proposed and may proceed when construction begins

  7. Establishing the Boundaries and Building Bridges: Research Methods Into the Ecology of the Refugee Parenting Experience

    Directory of Open Access Journals (Sweden)

    Nombasa Williams

    2010-10-01

    Full Text Available This article discusses the suitability of the focus group method for conducting research early in post-resettlement among refugee parents and carers in South Australia. This method was employed to uncover the refugee parenting experience in pre-resettlement contexts. There were three refugee focus groups, consisting of a Sudanese women’s group, an African men’s group, and an Afghani and Iraqi women’s group. To illustrate each group’s differential parenting ecologies in milieus of forced migration ecological matrixes were devised which are presented in the results section. An ecological matrix was also developed to unpack, code and analyse transcripts. The matrix was designed to include categories and actions so as to construct meaning units and subsequent condensed meaning units to determine the concluding themes. These provided an analytical framework with which to illuminate the constructed meanings participants attributed to their refugee parenting experiences. The findings provide insights into the ecology of the refugee parenting experience and might be of considerable importance for Australian resettlement services and state systems of child protection seeking to develop culturally appropriate and relevant services.

  8. [Ecological risk assessment of dam construction for terrestrial plant species in middle reach of Lancangjiang River, Southwest China].

    Science.gov (United States)

    Li, Xiao-Yan; Dong, Shi-Kui; Liu, Shi-Liang; Peng, Ming-Chun; Li, Jin-Peng; Zhao, Qing-He; Zhang, Zhao-Ling

    2012-08-01

    Taking the surrounding areas of Xiaowan Reservoir in the middle reach of Lancangjiang River as study area, and based on the vegetation investigation at three sites including electricity transmission area (site 1), electricity-transfer substation and roadsides to the substation (site 2), and emigration area (site 3) in 1997 (before dam construction), another investigation was conducted on the vegetation composition, plant coverage, and dominant species at the same sites in 2010 (after dam construction), aimed to evaluate the ecological risk of the dam construction for the terrestrial plant species in middle reach of Lancangjiang River. There was an obvious difference in the summed dominance ratio of dominant species at the three sites before and after the dam construction. According the types of species (dominant and non-dominant species) and the changes of plant dominance, the ecological risk (ER) for the plant species was categorized into 0 to IV, i.e., no or extremely low ecological risk (0), low ecological risk (I), medium ecological risk (II), high ecological risk (III), and extremely high ecological risk (IV). As affected by the dam construction, the majority of the species were at ER III, and a few species were at ER IV. The percentage of the plant species at ER III and ER IV at site 3 was higher than that at sites 1 and 2. The decrease or loss of native plants and the increase of alien or invasive plants were the major ecological risks caused by the dam construction. Effective protection strategies should be adopted to mitigate the ecological risk of the dam construction for the terrestrial plants at species level.

  9. Application of econometric and ecology analysis methods in physics software

    Science.gov (United States)

    Han, Min Cheol; Hoff, Gabriela; Kim, Chan Hyeong; Kim, Sung Hun; Grazia Pia, Maria; Ronchieri, Elisabetta; Saracco, Paolo

    2017-10-01

    Some data analysis methods typically used in econometric studies and in ecology have been evaluated and applied in physics software environments. They concern the evolution of observables through objective identification of change points and trends, and measurements of inequality, diversity and evenness across a data set. Within each analysis area, various statistical tests and measures have been examined. This conference paper summarizes a brief overview of some of these methods.

  10. An improved spatial contour tree constructed method

    Science.gov (United States)

    Zheng, Yi; Zhang, Ling; Guilbert, Eric; Long, Yi

    2018-05-01

    Contours are important data to delineate the landform on a map. A contour tree provides an object-oriented description of landforms and can be used to enrich the topological information. The traditional contour tree is used to store topological relationships between contours in a hierarchical structure and allows for the identification of eminences and depressions as sets of nested contours. This research proposes an improved contour tree so-called spatial contour tree that contains not only the topological but also the geometric information. It can be regarded as a terrain skeleton in 3-dimention, and it is established based on the spatial nodes of contours which have the latitude, longitude and elevation information. The spatial contour tree is built by connecting spatial nodes from low to high elevation for a positive landform, and from high to low elevation for a negative landform to form a hierarchical structure. The connection between two spatial nodes can provide the real distance and direction as a Euclidean vector in 3-dimention. In this paper, the construction method is tested in the experiment, and the results are discussed. The proposed hierarchical structure is in 3-demintion and can show the skeleton inside a terrain. The structure, where all nodes have geo-information, can be used to distinguish different landforms and applied for contour generalization with consideration of geographic characteristics.

  11. Commodifying snow, taming the waters. Socio-ecological niche construction in an Alpine village.

    Science.gov (United States)

    Gross, Robert; Winiwarter, Verena

    White belts of snow clad mountains all over the world each winter. Even if there is no snow, the tourism industry is able to produce the white finery at the push of the button, thereby consuming large amounts of water. Studying Damüls, a well-known ski resort in Austria's westernmost province Vorarlberg, we can show that the development of a service sector within agro-pastoral landscapes was connected with novel water uses and massive interventions into Alpine landscapes. Human niche construction theory offers a unique avenue for studying the development of Alpine communities, but also highlights side effects accompanying the change from agrarian to tourism livelihoods. One aim of this paper is to broaden the scope of human niche construction theory. Inceptive, counteractive and relocational niche construction activities were coupled to the differentiation of actor groups. To incorporate social dynamics, indispensable for studies in environmental history, we propose the concept of socio-ecological niche construction. The paper investigates how villagers balanced resource limitations typical for an agrarian society with the differentiation of sub-niches, mediating selective forces on the population. When the valleys were industrialized, Damüls was almost given up as a permanent settlement. Then, tourists entered the stage, by and by turning the wheel of local development into a different direction. A tourism niche based on natural snow evolved from the 1930s onwards. While the socio-ecological niches of agriculture and tourism coexisted in the interwar years, this changed when ski lifts were built, embedded into a debt-based economy that made the tourism niche vulnerable to snow availability. Snow-dependency became a powerful selective force. It was mediated by the ski lift companies through a range of niche construction activities that turned water into an important resource of snowmaking systems.

  12. Simulation of ecological processes using response functions method

    International Nuclear Information System (INIS)

    Malkina-Pykh, I.G.; Pykh, Yu. A.

    1998-01-01

    The article describes further development and applications of the already well-known response functions method (MRF). The method is used as a basis for the development of mathematical models of a wide set of ecological processes. The model of radioactive contamination of the ecosystems is chosen as an example. The mathematical model was elaborated for the description of 90 Sr dynamics in the elementary ecosystems of various geographical zones. The model includes the blocks corresponding with the main units of any elementary ecosystem: lower atmosphere, soil, vegetation, surface water. Parameters' evaluation was provided on a wide set of experimental data. A set of computer simulations was done on the model to prove the possibility of the model's use for ecological forecasting

  13. Ecologically Safe Geothermal Energy Resources in Western Siberia near high-rise construction zones

    Science.gov (United States)

    Shevchenko, Alexandr; Shiganova, Olga

    2018-03-01

    The development of geothermal energy in combination with other renewable energy sources (the sun, the wind) will help to solve the problem of heat supply and electrification in near high-rise construction zones of the country, especially in sparsely populated parts, where centralized energy and heat supply is economically unacceptable, and will improve the ecological situation. The aim of the research is to analyze the geothermal resources of the main aquifers in Western Siberia and to develop recommendations for further study and use of heat and power resources of this territory. The article gives retrospective of state research programs and potential use of hydrothermal resources of administrative units geographically entering the territory under consideration. It is noted that by now such programs have been curtailed for various reasons, although there are examples of their successful and effective use in various fields of industry and agriculture. According to the decision of the Supreme Ecological Council of the State Duma Committee of the Russian Federation adopted in 2014 on the beginning of the development of federal targeted programs for the use of heat power water as a source of electricity and heat supply, the Ministry of Natural Resources and Ecology of the Russian Federation made proposals for further research and use of hydrothermal waters in Western Siberia. Implementation of the programs proposed by the authors, alongside with other positive aspects, will solve the problems of heat supply in remote territories and improve the environmental situation in the region.

  14. The assessment of waters ecological state of the Crimea coastal near high-rise construction zones

    Science.gov (United States)

    Vetrova, Natalya; Ivanenko, Tatyana; Mannanov, Emran

    2018-03-01

    The relevance of our study is determined by the significant level of coastal sea waters pollution by sewage near high-rise construction zones, which determines the violation of the sanitary and hygienic of sea waters `characteristics and limits the possibilities for organizing recreational activities. The purpose of this study is to identify the ecological state of the marine aquatic area by the example of the Western Crimea near high-rise construction zones. The studies confirmed that the recreational and coastal area wastewater is intensely mixed with seawater, as a result, the pollution in the coastal strip of the sea in the area of deep water discharges sharply decrease. This happens because of water rapid rise to the surface and under the influence of the continuous movement of sea water huge masses with deep-water discharge, fresh wastewater is actively mixed with sea water. However, with no doubt, it is inadmissible to discharge sewage into the sea directly from the shore, but only at the estimated distance from the coast. The materials of the article can be useful for the management bodies and organizations involved in monitoring the quality of the coastal zone of the sea, teachers and students of higher educational institutions when assessing the ecological situation of the territories.

  15. Preassembly method for construction of nuclear power station

    International Nuclear Information System (INIS)

    Shimazaki, Yasuyoshi

    1986-01-01

    Recently preassembly method for construction are generally popular in Japan and this trend is prevailing all over the world. They provide good solutions to the problems that the Japanese construction industry faces and also they meet the needs for construction of nuclear power plants having heavily reinforced concrete structures. We have already established basic technologies for the methods, developing more advanced methods (more systematic, larger sized, more applicable, etc.). In the near future, they will be further developed up to a complete system called 'Industrialized construction method'. This system will include the use of precast concrete component, steel concrete composit structures and construction robots. (author)

  16. [Impact of ecological protection construction on schistosomiasis transmission of Qionghai Lake wetland in Xichang City].

    Science.gov (United States)

    Feng, Zong-liang; Xu, Cong-min; Yin, Hong-zhi; Hua, Jiao; Lai, Yu-hua; Zhao, Lin; Wu, Zhong-ping

    2016-02-01

    To understand the impact of Qionghai Lake wetland ecological protection construction on the prevalence of schistosomiasis, so as to provide the evidence for formulating the strategies for schistosomiasis control and prevention. A retrospective survey of the construction of Qionghai Lake wetland was performed, and eleven villages around the wetland were surveyed for schistosomiasis endemic situation. The influence of the wetland project on the schistosomiasis prevalence and Oncomelania hupensis snail status were investigated. Before the construction of Qionghai Lake wetland, the snail elimination and extended chemotherapy for residents was performed. After the project was finished, the roads and ditches were hardened. From 2009 to 2014, the schistosome infection rate of residents declined from 0.37% to 0. No schistosome infected snails were found and in recent 2 years, no snails were found. No mice were infected in the sentinel tests. The construction of Qionghai Lake wetland effectively eliminates snails, and interrupts the transmission of schistosomiasis. However, the environment of the wetland is more suitable for snail breeding, and therefore, the surveillance still should be strengthened.

  17. Landscape scale ecological monitoring as part of an EIA of major construction activities: experience at the Turkish section of the BTC crude oil pipeline project.

    Science.gov (United States)

    Sahin, Sükran; Kurum, Ekrem

    2009-09-01

    Ecological monitoring is a complementary component of the overall environmental management and monitoring program of any Environmental Impact Assessment (EIA) report. The monitoring method should be developed for each project phase and allow for periodic reporting and assessment of compliance with the environmental conditions and requirements of the EIA. Also, this method should incorporate a variance request program since site-specific conditions can affect construction on a daily basis and require time-critical application of alternative construction scenarios or environmental management methods integrated with alternative mitigation measures. Finally, taking full advantage of the latest information and communication technologies can enhance the quality of, and public involvement in, the environmental management program. In this paper, a landscape-scale ecological monitoring method for major construction projects is described using, as a basis, 20 months of experience on the Baku-Tbilisi-Ceyhan (BTC) Crude Oil Pipeline Project, covering Turkish Sections Lot B and Lot C. This analysis presents suggestions for improving ecological monitoring for major construction activities.

  18. Ecological and Economic Use of Energy by Optimization of Building Construction

    International Nuclear Information System (INIS)

    Jahrmann, H. J.

    1998-01-01

    A major part of energy used in daily life is consumed by heating buildings during cold weather periods and for cooling buildings at warmer times. Another major use of energy takes place during production of building materials, construction of the building itself and the depletion and disposal of this building at the end of its lifecycle. Therefore it seems apparent, that effective conservation and saving of energy is a very comprehensive and total approach. The topic is not solely energy saving, it rather is the most effective use of economical and ecological resources. To be energy conscious we have to give closer look to all phases in the existence of a building, and not only of the building. The human being as well must be thoroughly considered in his surrounding, all aspects of his housing suspected for the waste and potential of energy use. So human itself, with his well being in the house, is a major source of energy use. Even the humans health and sickness with its need for cure will cause significant energy input. In the first phase of energy saving programs two aspects should be focused: 1. Primary energy need of construction materials: Primary energy need is the amount of energy used to produce a construction material; from its base origin up to assembling in the housing. Complete ecological balances already exist for a number of materials. Significant difference between materials is observed. The potential for energy saving is impressive. At least 10-30% total energy conservation during the lifecycle of a building appears likely. In many cases a strong positive impact on local economy is expected too. 2. Energy saving by improvement of the thermal quality of buildings: Energy conscious construction of buildings shows an enormous potential for saving. Thermal insulation and effective heating and ventilation systems promise energy savings in the amount of 30-70%. Infrared thermal building analysis and software simulations used prior revitalization of

  19. A Ranking Method for Evaluating Constructed Responses

    Science.gov (United States)

    Attali, Yigal

    2014-01-01

    This article presents a comparative judgment approach for holistically scored constructed response tasks. In this approach, the grader rank orders (rather than rate) the quality of a small set of responses. A prior automated evaluation of responses guides both set formation and scaling of rankings. Sets are formed to have similar prior scores and…

  20. Possibilities of the Integration of the Method of the Ecologically Oriented Independent Scientific Research in the Study Process

    Science.gov (United States)

    Grizans, Jurijs; Vanags, Janis

    2010-01-01

    The aim of this paper is to analyse possibilities of the integration of the method of the ecologically oriented independent scientific research in the study process. In order to achieve the set aim, the following scientific research methods were used: analysis of the conceptual guidelines for the development of environmentally oriented entrepreneurship, interpretation of the experts' evaluation of the ecologically oriented management, analysis of the results of the students' ecologically oriented independent scientific research, as well as monographic and logically constructive methods. The results of the study give an opportunity to make conclusions and to develop conceptual recommendations on how to introduce future economics and business professionals with the theoretical and practical aspects of ecologically oriented management during the study process.

  1. Ecology

    Science.gov (United States)

    Ternjej, Ivancica; Mihaljevic, Zlatko

    2017-10-01

    Ecology is a science that studies the mutual interactions between organisms and their environment. The fundamental subject of interest in ecology is the individual. Topics of interest to ecologists include the diversity, distribution and number of particular organisms, as well as cooperation and competition between organisms, both within and among ecosystems. Today, ecology is a multidisciplinary science. This is particularly true when the subject of interest is the ecosystem or biosphere, which requires the knowledge and input of biologists, chemists, physicists, geologists, geographists, climatologists, hydrologists and many other experts. Ecology is applied in a science of restoration, repairing disturbed sites through human intervention, in natural resource management, and in environmental impact assessments.

  2. Assessing the accuracy and stability of variable selection methods for random forest modeling in ecology

    Science.gov (United States)

    Random forest (RF) modeling has emerged as an important statistical learning method in ecology due to its exceptional predictive performance. However, for large and complex ecological datasets there is limited guidance on variable selection methods for RF modeling. Typically, e...

  3. Causes in the construction of causal law: A psycho-ecological model.

    Science.gov (United States)

    Young, Gerald

    2010-01-01

    The article presents an integrated psycho-ecological model of the construction of law, with implications for practice in law and mental health. The model is based on a series of concentric circles, each representing a layer of influence on the construction of law. The circle furthest removed from the center represents the influence of culture, society and industry, in particular, and the circle at the center of the circle represents the case at hand, for example, about individual complainant or mass action. The article begins by arguing that basic terms in relation to cause need clarification and also work is needed to disambiguate the concepts involved. After dealing with these issues, the article examines science and mental health. Is the scientific evidence presented by the expert sufficiently reliable and valid to meet admissibility standards of good compared to poor or junk science? Is the research undertaken for court or presented to court biased, with factors hidden, such as links to industry. Are individual evaluations conducted with biased science serving to justify partial conclusions? The dangers of powerful influences on the construction of law are highlighted, for example, related to the individual complainant malingering and the insurance industry protecting its financial interests at the expense of genuinely injured patients. In conclusion, suggestions for empirical research are offered. Copyright 2009 Elsevier Ltd. All rights reserved.

  4. An Integrated Framework for Process-Driven Model Construction in Disease Ecology and Animal Health.

    Science.gov (United States)

    Mancy, Rebecca; Brock, Patrick M; Kao, Rowland R

    2017-01-01

    Process models that focus on explicitly representing biological mechanisms are increasingly important in disease ecology and animal health research. However, the large number of process modelling approaches makes it difficult to decide which is most appropriate for a given disease system and research question. Here, we discuss different motivations for using process models and present an integrated conceptual analysis that can be used to guide the construction of infectious disease process models and comparisons between them. Our presentation complements existing work by clarifying the major differences between modelling approaches and their relationship with the biological characteristics of the epidemiological system. We first discuss distinct motivations for using process models in epidemiological research, identifying the key steps in model design and use associated with each. We then present a conceptual framework for guiding model construction and comparison, organised according to key aspects of epidemiological systems. Specifically, we discuss the number and type of disease states, whether to focus on individual hosts (e.g., cows) or groups of hosts (e.g., herds or farms), how space or host connectivity affect disease transmission, whether demographic and epidemiological processes are periodic or can occur at any time, and the extent to which stochasticity is important. We use foot-and-mouth disease and bovine tuberculosis in cattle to illustrate our discussion and support explanations of cases in which different models are used to address similar problems. The framework should help those constructing models to structure their approach to modelling decisions and facilitate comparisons between models in the literature.

  5. Lifestyle of the biotroph Agrobacterium tumefaciens in the ecological niche constructed on its host plant.

    Science.gov (United States)

    González-Mula, Almudena; Lang, Julien; Grandclément, Catherine; Naquin, Delphine; Ahmar, Mohammed; Soulère, Laurent; Queneau, Yves; Dessaux, Yves; Faure, Denis

    2018-07-01

    Agrobacterium tumefaciens constructs an ecological niche in its host plant by transferring the T-DNA from its Ti plasmid into the host genome and by diverting the host metabolism. We combined transcriptomics and genetics for understanding the A. tumefaciens lifestyle when it colonizes Arabidopsis thaliana tumors. Transcriptomics highlighted: a transition from a motile to sessile behavior that mobilizes some master regulators (Hfq, CtrA, DivK and PleD); a remodeling of some cell surface components (O-antigen, succinoglucan, curdlan, att genes, putative fasciclin) and functions associated with plant defense (Ef-Tu and flagellin pathogen-associated molecular pattern-response and glycerol-3-phosphate and nitric oxide signaling); and an exploitation of a wide variety of host resources, including opines, amino acids, sugars, organic acids, phosphate, phosphorylated compounds, and iron. In addition, construction of transgenic A. thaliana lines expressing a lactonase enzyme showed that Ti plasmid transfer could escape host-mediated quorum-quenching. Finally, construction of knock-out mutants in A. tumefaciens showed that expression of some At plasmid genes seemed more costly than the selective advantage they would have conferred in tumor colonization. We provide the first overview of A. tumefaciens lifestyle in a plant tumor and reveal novel signaling and trophic interplays for investigating host-pathogen interactions. © 2018 The Authors. New Phytologist © 2018 New Phytologist Trust.

  6. 23 CFR 635.104 - Method of construction.

    Science.gov (United States)

    2010-04-01

    ... CONSTRUCTION AND MAINTENANCE Contract Procedures § 635.104 Method of construction. (a) Actual construction work shall be performed by contract awarded by competitive bidding; unless, as provided in § 635.104(b), the... for bids and the award of contracts shall comply with the procedures and requirements set forth in...

  7. Estimation methods for nonlinear state-space models in ecology

    DEFF Research Database (Denmark)

    Pedersen, Martin Wæver; Berg, Casper Willestofte; Thygesen, Uffe Høgsbro

    2011-01-01

    The use of nonlinear state-space models for analyzing ecological systems is increasing. A wide range of estimation methods for such models are available to ecologists, however it is not always clear, which is the appropriate method to choose. To this end, three approaches to estimation in the theta...... logistic model for population dynamics were benchmarked by Wang (2007). Similarly, we examine and compare the estimation performance of three alternative methods using simulated data. The first approach is to partition the state-space into a finite number of states and formulate the problem as a hidden...... Markov model (HMM). The second method uses the mixed effects modeling and fast numerical integration framework of the AD Model Builder (ADMB) open-source software. The third alternative is to use the popular Bayesian framework of BUGS. The study showed that state and parameter estimation performance...

  8. Constructing an Intelligent Patent Network Analysis Method

    Directory of Open Access Journals (Sweden)

    Chao-Chan Wu

    2012-11-01

    Full Text Available Patent network analysis, an advanced method of patent analysis, is a useful tool for technology management. This method visually displays all the relationships among the patents and enables the analysts to intuitively comprehend the overview of a set of patents in the field of the technology being studied. Although patent network analysis possesses relative advantages different from traditional methods of patent analysis, it is subject to several crucial limitations. To overcome the drawbacks of the current method, this study proposes a novel patent analysis method, called the intelligent patent network analysis method, to make a visual network with great precision. Based on artificial intelligence techniques, the proposed method provides an automated procedure for searching patent documents, extracting patent keywords, and determining the weight of each patent keyword in order to generate a sophisticated visualization of the patent network. This study proposes a detailed procedure for generating an intelligent patent network that is helpful for improving the efficiency and quality of patent analysis. Furthermore, patents in the field of Carbon Nanotube Backlight Unit (CNT-BLU were analyzed to verify the utility of the proposed method.

  9. The Model Construction of English Ecological Class in the High School in China

    Science.gov (United States)

    Zhou, Zhen

    2017-01-01

    The Ecological class is a kind of class in which the system of class teaching is in a state of dynamic balance and it can enhance the efficiency of class teaching. The article analyzes the feature of English ecological class, illustrates the non-ecological class teaching problems and explores the ways to establish English ecological class from the…

  10. Construction method of pre assembled unit of bolt sphere grid

    Science.gov (United States)

    Hu, L. W.; Guo, F. L.; Wang, J. L.; Bu, F. M.

    2018-03-01

    The traditional construction of bolt sphere grid has many disadvantages, such as high cost, large amount of work at high altitude and long construction period, in order to make up for these shortcomings, in this paper, a new and applicable construction method is explored: setting up local scaffolding, installing the bolt sphere grid starting frame on the local scaffolding, then the pre assembled unit of bolt sphere grid is assembled on the ground, using small hoisting equipment to lift pre assembled unit to high altitude and install. Compared with the traditional installation method, the construction method has strong practicability and high economic efficiency, and has achieved good social and economic benefits.

  11. Method of detecting construction faults in concrete pressure vessels

    International Nuclear Information System (INIS)

    Robertson, S.A.; Duhoux, M.; Dawance, G.; Carrie, C.; Morel, D.

    1976-01-01

    A major problem in the design and construction of concrete pressure vessels for nuclear power stations is the risk of excessive air leaks through the concrete itself, due to faulty construction. The 'sonic coring' method of non-destructive concrete testing has been used successfully in pile and diaphragm wall construction control for several years, and the potential use of this method to control the presence of faults in concrete pressure vessels is here described. (author)

  12. Construction method for plant and facility for performing the method

    International Nuclear Information System (INIS)

    Matsuura, Tadashi; Koda, Koichi; Miyahara, Ryohei; Hasegawa, Hiroshi; Tatehoko, Kazuto; Takeda, Masakado; Yoshinaga, Toshiaki.

    1997-01-01

    For constructing a nuclear power plant, it is necessary to dispose a large-scaled temporarily constructed yard for install or operate a large crane. Rails are laid in series over located positions of a plurality of buildings, and a gantry crane which moves on rails and has a size striding over the buildings is disposed. The crane can work for loading operation required for the construction of a plurality of buildings and can operate over the entire region for the range of the loading operation even for large weighted loads. The gantry crane is moved toward the seashore, and construction materials and products transported on the sea are received by the gantry crane and installed to the buildings. The transportation on the land for the construction materials and products is reduced to improve efficiency. In addition, the rails are extended beyond the region where the buildings are constructed, and a yard is constructed along the extended region. The transportation from the yard can be conducted economically and efficiently with no relaying operation. (N.H.)

  13. Heat exchangers and methods of construction thereof

    International Nuclear Information System (INIS)

    Schluderberg, D.C.

    1988-01-01

    A heat exchanger is described comprising a shell having first inlet means and first outlet means for the flow of a first fluid therethrough, a plurality of tubes within the shell to provide a path for flow of a second fluid in heat exchange relation to the first fluid, second inlet means and second outlet means for flow of the second fluid to and from the tubes respectively, a tubular member concentric with at least a portion of the length of one of the tubes to define a space between the tube and the tubular member, at least one radially outwardly projecting portion on the tubular member, and a plurality of tube support means spaced apart and disposed generally perpendicular to the tube axes, wherein the tubular member is fixedly attached at one end to one of the tube support means and at the other end to an adjacent one of the tube support means, the space between the tube and the tubular member is closed to flow of both the first fluid and the second fluid, and the radially outwardly projecting portion on the tubular member extends longitudinally to allow flexing of the tubular member and expanding thereof radially outwardly during construction of the heat exchanger so as to allow insertion of the tube into the tubular member, the radially outwardly projecting portion defining a gap which contributes to the space between the tube and the tubular member. 6 figs

  14. Method of constructing a superconducting magnet

    Science.gov (United States)

    Satti, John A.

    1981-01-01

    A superconducting magnet designed to produce magnetic flux densities of the order of 4 to 5 Webers per square meter is constructed by first forming a cable of a plurality of matrixed superconductor wires with each wire of the plurality insulated from each other one. The cable is shaped into a rectangular cross-section and is wound with tape in an open spiral to create cooling channels. Coils are wound in a calculated pattern in saddle shapes to produce desired fields, such as dipoles, quadrupoles, and the like. Wedges are inserted between adjacent cables as needed to maintain substantially radial placement of the long dimensions of cross sections of the cables. After winding, individual strands in each of the cables are brought out to terminals and are interconnected to place all of the strands in series and to maximize the propagation of a quench by alternating conduction from an inner layer to an outer layer and from top half to bottom half as often as possible. Individual layers are separated from others by spiraled aluminum spacers to facilitate cooling. The wound coil is wrapped with an epoxy tape that is cured by heat and then machined to an interference fit with an outer aluminum pipe which is then affixed securely to the assembled coil by heating it to make a shrink fit. In an alternate embodiment, one wire of the cable is made of copper or the like to be heated externally to propagate a quench.

  15. An Integrated Approach to Explore the Relationship Among Economic, Construction Land Use, and Ecology Subsystems in Zhejiang Province, China

    Directory of Open Access Journals (Sweden)

    Chuyu Xia

    2016-05-01

    Full Text Available Zhejiang Province, China is experiencing rapid urbanization, facing the challenge of coupling socioeconomic development and ecological conservation. This paper establishes a comprehensive index system to assess coordinating development of economic, construction land use (CLU, and ecology subsystems. A Granger test and a coupling coordination model were applied to explore the causal relationship and the coordinated development state among the three subsystems from 2000 to 2012. The results showed that: (1 changes in the integrated value of the economic subsystem were the Granger cause of changes in the ecology and CLU subsystems, and the changes in the integrated values of ecology and CLU was each other’s Granger cause; (2 the coupling coordination relationship of the integrated value for economic–CLU–ecology was constrained by the relationship between the economic and the CLU subsystems from 2000 to 2004, and that between the ecology and the economic subsystems was the impediment of the sustainable development of economic–CLU–ecology from 2004 to 2012. This research helps to identify approach to sustainable development through analyzing synergistic effects, interdependencies, and trade-offs among the integrated economic–CLU–ecology values, and to make significant contribution to urban planning policies in rapid urbanization region.

  16. Bayesian data analysis in population ecology: motivations, methods, and benefits

    Science.gov (United States)

    Dorazio, Robert

    2016-01-01

    During the 20th century ecologists largely relied on the frequentist system of inference for the analysis of their data. However, in the past few decades ecologists have become increasingly interested in the use of Bayesian methods of data analysis. In this article I provide guidance to ecologists who would like to decide whether Bayesian methods can be used to improve their conclusions and predictions. I begin by providing a concise summary of Bayesian methods of analysis, including a comparison of differences between Bayesian and frequentist approaches to inference when using hierarchical models. Next I provide a list of problems where Bayesian methods of analysis may arguably be preferred over frequentist methods. These problems are usually encountered in analyses based on hierarchical models of data. I describe the essentials required for applying modern methods of Bayesian computation, and I use real-world examples to illustrate these methods. I conclude by summarizing what I perceive to be the main strengths and weaknesses of using Bayesian methods to solve ecological inference problems.

  17. An Integrated Framework for Process-Driven Model Construction in Disease Ecology and Animal Health

    Directory of Open Access Journals (Sweden)

    Rebecca Mancy

    2017-09-01

    Full Text Available Process models that focus on explicitly representing biological mechanisms are increasingly important in disease ecology and animal health research. However, the large number of process modelling approaches makes it difficult to decide which is most appropriate for a given disease system and research question. Here, we discuss different motivations for using process models and present an integrated conceptual analysis that can be used to guide the construction of infectious disease process models and comparisons between them. Our presentation complements existing work by clarifying the major differences between modelling approaches and their relationship with the biological characteristics of the epidemiological system. We first discuss distinct motivations for using process models in epidemiological research, identifying the key steps in model design and use associated with each. We then present a conceptual framework for guiding model construction and comparison, organised according to key aspects of epidemiological systems. Specifically, we discuss the number and type of disease states, whether to focus on individual hosts (e.g., cows or groups of hosts (e.g., herds or farms, how space or host connectivity affect disease transmission, whether demographic and epidemiological processes are periodic or can occur at any time, and the extent to which stochasticity is important. We use foot-and-mouth disease and bovine tuberculosis in cattle to illustrate our discussion and support explanations of cases in which different models are used to address similar problems. The framework should help those constructing models to structure their approach to modelling decisions and facilitate comparisons between models in the literature.

  18. Recognition method of construction conflict based on driver's eye movement.

    Science.gov (United States)

    Xu, Yi; Li, Shiwu; Gao, Song; Tan, Derong; Guo, Dong; Wang, Yuqiong

    2018-04-01

    Drivers eye movement data in simulated construction conflicts at different speeds were collected and analyzed to find the relationship between the drivers' eye movement and the construction conflict. On the basis of the relationship between the drivers' eye movement and the construction conflict, the peak point of wavelet processed pupil diameter, the first point on the left side of the peak point and the first blink point after the peak point are selected as key points for locating construction conflict periods. On the basis of the key points and the GSA, a construction conflict recognition method so called the CCFRM is proposed. And the construction conflict recognition speed and location accuracy of the CCFRM are verified. The good performance of the CCFRM verified the feasibility of proposed key points in construction conflict recognition. Copyright © 2018 Elsevier Ltd. All rights reserved.

  19. [Construction of individual-based ecological model for Scomber japonicas at its early growth stages in East China Sea].

    Science.gov (United States)

    Li, Yue-Song; Chen, Xin-Jun; Yang, Hong

    2012-06-01

    By adopting FVCOM-simulated 3-D physical field and based on the biological processes of chub mackerel (Scomber japonicas) in its early life history from the individual-based biological model, the individual-based ecological model for S. japonicas at its early growth stages in the East China Sea was constructed through coupling the physical field in March-July with the biological model by the method of Lagrange particle tracking. The model constructed could well simulate the transport process and abundance distribution of S. japonicas eggs and larvae. The Taiwan Warm Current, Kuroshio, and Tsushima Strait Warm Current directly affected the transport process and distribution of the eggs and larvae, and indirectly affected the growth and survive of the eggs and larvae through the transport to the nursery grounds with different water temperature and foods. The spawning grounds in southern East China Sea made more contributions to the recruitment to the fishing grounds in northeast East China Sea, but less to the Yangtze estuary and Zhoushan Island. The northwestern and southwestern parts of spawning grounds had strong connectivity with the nursery grounds of Cheju and Tsushima Straits, whereas the northeastern and southeastern parts of the spawning ground had strong connectivity with the nursery grounds of Kyushu and Pacific Ocean.

  20. Ecology

    International Nuclear Information System (INIS)

    Kalusche, D.

    1978-01-01

    The book turns to the freshment, the teacher, for preparation of ecological topics for lessons, but also to pupils of the secondary stage II, and the main course ecology. The book was knowingly held simple with the restriction to: the ecosystem and its abiotic basic functions, simple articles on population biology, bioceonotic balance ith the questions of niche formation and the life form types coherent with it, of the substance and energy household, the production biology and space-wise and time-wise differentations within an ecological system form the main points. A central role in the volume is given to the illustrations. Their variety is to show and deepen the coherences shown. (orig./HP) [de

  1. Using Voice, Meaning, Mutual Construction of Knowledge, and Transfer of Learning to Apply an Ecological Perspective to Group Work Training

    Science.gov (United States)

    Orr, Jonathan J.; Hulse-Killacky, Diana

    2006-01-01

    Concepts of voice, meaning, mutual construction of knowledge, and transfer of learning are presented in this paper as critical ingredients that support the teaching of group work from an ecological perspective. Examples of these concepts are given to illustrate their application in group work classes. (Contains 1 table.)

  2. Construction techniques and management methods for BWR plants

    International Nuclear Information System (INIS)

    Shimizu, Yohji; Tateishi, Mizuo; Hayashi, Yoshishige

    1989-01-01

    Toshiba is constantly striving for safer and more efficient plant construction to realize high-quality BWR plants within a short construction period. To achieve these aims, Toshiba has developed and improved a large number of construction techniques and construction management methods. In the area of installation, various techniques have been applied such as the modularization of piping and equipment, shop installation of reactor internals, etc. Further, installation management has been upgraded by the use of pre-installation review programs, the development of installation control systems, etc. For commissioning, improvements in commissioning management have been achieved through the use of computer systems, and testing methods have also been upgraded by the development of computer systems for the recording and analysis of test data and the automatic adjustment of controllers in the main control system of the BWR. This paper outlines these construction techniques and management methods. (author)

  3. Tank Operations Contract Construction Management Methodology. Utilizing The Agency Method Of Construction Management

    International Nuclear Information System (INIS)

    Lesko, K.F.; Berriochoa, M.V.

    2010-01-01

    Washington River Protection Solutions, LLC (WRPS) has faced significant project management challenges in managing Davis-Bacon construction work that meets contractually required small business goals. The unique challenge is to provide contracting opportunities to multiple small business constructioin subcontractors while performing high hazard work in a safe and productive manner. Previous to the WRPS contract, construction work at the Hanford Tank Farms was contracted to large companies, while current Department of Energy (DOE) Contracts typically emphasize small business awards. As an integral part of Nuclear Project Management at Hanford Tank Farms, construction involves removal of old equipment and structures and installation of new infrastructure to support waste retrieval and waste feed delivery to the Waste Treatment Plant. Utilizing the optimum construction approach ensures that the contractors responsible for this work are successful in meeting safety, quality, cost and schedule objectives while working in a very hazardous environment. This paper descirbes the successful transition from a traditional project delivery method that utilized a large business general contractor and subcontractors to a new project construction management model that is more oriented to small businesses. Construction has selected the Agency Construction Management Method (John E Schaufelberger, Len Holm, 'Management of Construction Projects, A Constructor's Perspective', University of Washington, Prentice Hall 2002). This method was implemented in the first quarter of Fiscal Year 2009 (FY2009), where Construction Management is performed by substantially home office resources from the URS Northwest Office in Richland, Washington. The Agency Method has allowed WRPS to provide proven Construction Managers and Field Leads to mentor and direct small business contractors, thus providing expertise and assurance of a successful project. Construction execution contracts are subcontracted

  4. TANK OPERATIONS CONTRACT CONSTRUCTION MANAGEMENT METHODOLOGY UTILIZING THE AGENCY METHOD OF CONSTRUCTION MANAGEMENT

    Energy Technology Data Exchange (ETDEWEB)

    LESKO KF; BERRIOCHOA MV

    2010-02-26

    Washington River Protection Solutions, LLC (WRPS) has faced significant project management challenges in managing Davis-Bacon construction work that meets contractually required small business goals. The unique challenge is to provide contracting opportunities to multiple small business constructioin subcontractors while performing high hazard work in a safe and productive manner. Previous to the WRPS contract, construction work at the Hanford Tank Farms was contracted to large companies, while current Department of Energy (DOE) Contracts typically emphasize small business awards. As an integral part of Nuclear Project Management at Hanford Tank Farms, construction involves removal of old equipment and structures and installation of new infrastructure to support waste retrieval and waste feed delivery to the Waste Treatment Plant. Utilizing the optimum construction approach ensures that the contractors responsible for this work are successful in meeting safety, quality, cost and schedule objectives while working in a very hazardous environment. This paper descirbes the successful transition from a traditional project delivery method that utilized a large business general contractor and subcontractors to a new project construction management model that is more oriented to small businesses. Construction has selected the Agency Construction Management Method (John E Schaufelberger, Len Holm, "Management of Construction Projects, A Constructor's Perspective", University of Washington, Prentice Hall 2002). This method was implemented in the first quarter of Fiscal Year 2009 (FY2009), where Construction Management is performed by substantially home office resources from the URS Northwest Office in Richland, Washington. The Agency Method has allowed WRPS to provide proven Construction Managers and Field Leads to mentor and direct small business contractors, thus providing expertise and assurance of a successful project. Construction execution contracts are

  5. Constructing a Sophistication Index as a Method of Market ...

    African Journals Online (AJOL)

    This study investigates the process of index construction as a means of measuring a hypothetical construct that can typically not be measured by a single question or item and applying it as a method of market segmentation. The availability of incidental secondary data provided a relevant quantitative basis to illustrate this ...

  6. Methods and models for the construction of weakly parallel tests

    NARCIS (Netherlands)

    Adema, J.J.; Adema, Jos J.

    1992-01-01

    Several methods are proposed for the construction of weakly parallel tests [i.e., tests with the same test information function (TIF)]. A mathematical programming model that constructs tests containing a prespecified TIF and a heuristic that assigns items to tests with information functions that are

  7. Methods and models for the construction of weakly parallel tests

    NARCIS (Netherlands)

    Adema, J.J.; Adema, Jos J.

    1990-01-01

    Methods are proposed for the construction of weakly parallel tests, that is, tests with the same test information function. A mathematical programing model for constructing tests with a prespecified test information function and a heuristic for assigning items to tests such that their information

  8. Introduction of characteristics and construction methods for Lungmen NPP

    International Nuclear Information System (INIS)

    Hur, Kyung Phil; Manager, General

    2007-01-01

    Daewoo Engineering and Construction Co., Ltd. has taken part in the construction of ABWR (Advance Boiling Water Reactor of capacity of 1,350MW) at Lungmen site in Taiwan since 1999 as a member of Joint Company for the Nuclear Island Civil Work and Nuclear Island Equipment and Piping Work. This paper discusses the introduction of NSSS of ABWR and the major construction methods applied to Lungmen Nuclear Power Plants. Even though there is no BWR or ABWR type of Nuclear Power Plants built in Korea, the information and data related to the newly advanced construction technologies which has been already applied successfully is very important for the future overseas expansion

  9. [Construction and evaluation of ecological network in Poyang Lake Eco-economic Zone, China.

    Science.gov (United States)

    Chen, Xiao Ping; Chen, Wen Bo

    2016-05-01

    Large-scale ecological patches play an important role in regional biodiversity conservation. However, with the rapid progress of China's urbanization, human disturbance on the environment is becoming stronger. Large-scale ecological patches will degrade not only in quantity, but also in quality, threatening the connections among them due to isolation and seriously affecting the biodiversity protection. Taking Poyang Lake Eco-economic Zone as a case, this paper established the potential ecological corridors by minimum cost model and GIS technique taking the impacts of landscape types, slope and human disturbance into consideration. Then, based on gravity quantitative model, we analyzed the intensity of ecological interactions between patches, and the potential ecological corridors were divided into two classes for sake of protection. Finally, the important ecological nodes and breaking points were identified, and the structure of the potential ecological network was analyzed. The results showed that forest and cropland were the main landscape types of ecological corridor composition, interaction between ecological patches differed obviously and the structure of the composed regional ecological network was complex with high connectivity and closure. It might provide a scientific basis for the protection of biodiversity and ecological network optimization in Poyang Lake Eco-economic Zone.

  10. The construction of optimal stated choice experiments theory and methods

    CERN Document Server

    Street, Deborah J

    2007-01-01

    The most comprehensive and applied discussion of stated choice experiment constructions available The Construction of Optimal Stated Choice Experiments provides an accessible introduction to the construction methods needed to create the best possible designs for use in modeling decision-making. Many aspects of the design of a generic stated choice experiment are independent of its area of application, and until now there has been no single book describing these constructions. This book begins with a brief description of the various areas where stated choice experiments are applicable, including marketing and health economics, transportation, environmental resource economics, and public welfare analysis. The authors focus on recent research results on the construction of optimal and near-optimal choice experiments and conclude with guidelines and insight on how to properly implement these results. Features of the book include: Construction of generic stated choice experiments for the estimation of main effects...

  11. A study on manufacturing and construction method of buffer

    International Nuclear Information System (INIS)

    Chijimatsu, Masakazu; Sugita, Yutaka; Amemiya, Kiyoshi

    1999-09-01

    As an engineered barrier system in the geological disposal of high-level waste, multibarrier system is considered. Multibarrier system consists of the vitrified waste, the overpack and the buffer. Bentonite is one of the potential material as the buffer because of its low water permeability, self-sealing properties, radionuclides adsorption and retardation properties, thermal conductivity, chemical buffering properties, overpack supporting properties, stress buffering properties, etc. In order to evaluate the functions of buffer, a lot of experiments has been conducted. The evaluations of these functions are based on the assumption that the buffer is emplaced or constructed in the disposal tunnel (or disposal pit) properly. Therefore, it is necessary to study on the manufacturing / construction method of buffer. As the manufacturing / construction technology of the buffer, the block installation method and in-situ compaction method, etc, are being investigated. The block installation method is to emplace the buffer blocks manufactured in advance at the ground facility, and construction processes of the block installation method at the underground will be simplified compared with the in-situ compaction method. On the other hand, the in-situ compaction method is to introduce the buffer material with specified water content into the disposal tunnel and to make the buffer with high density at the site using a compaction machine. In regard to the in-situ compaction method, it is necessary to investigate the optimum finished thickness of one layer because it is impossible to construct the buffer at one time. This report describes the results of compaction property test and the summary of the past investigation results in connection with the manufacturing / construction method. Then this report shows the construction method that will be feasible in the actual disposal site. (J.P.N.)

  12. Friendship in Young Children: Construction of a Behavioural Sociometric Method

    Science.gov (United States)

    van Hoogdalem, Anne-Greth; Singer, Elly; Eek, Anneloes; Heesbeen, Daniëlle

    2013-01-01

    We need methods to measure friendship among very young children to study the beginnings of friendship and the impact of experiences with friendship for later development. This article presents an overview of methods for measuring very young children's friendships. A behavioural sociometric method was constructed to study degrees of friendship…

  13. Efficacy of Two Different Instructional Methods Involving Complex Ecological Content

    Science.gov (United States)

    Randler, Christoph; Bogner, Franz X.

    2009-01-01

    Teaching and learning approaches in ecology very often follow linear conceptions of ecosystems. Empirical studies with an ecological focus consistent with existing syllabi and focusing on cognitive achievement are scarce. Consequently, we concentrated on a classroom unit that offers learning materials and highlights the existing complexity rather…

  14. Basic Methods for the Study of Reproductive Ecology of Fish in Aquaria.

    Science.gov (United States)

    Fukuda, Kazuya; Sunobe, Tomoki

    2017-07-20

    Captive-rearing observations are valuable for revealing aspects of fish behavior and ecology when continuous field investigations are impossible. Here, a series of basic techniques are described to enable observations of the reproductive behavior of a wild-caught gobiid fish, as a model, kept in an aquarium. The method focuses on three steps: collection, transport, and observations of reproductive ecology of a substrate spawner. Essential aspects of live fish collection and transport are (1) preventing injury to the fish, and (2) careful acclimation to the aquarium. Preventing harm through injuries such as scratches or a sudden change of water pressure is imperative when collecting live fish, as any physical damage is likely to negatively affect the survival and later behavior of the fish. Careful acclimation to aquaria decreases the incidence death and mitigates the shock of transport. Observations during captive rearing include (1) the identification of individual fish and (2) monitoring spawned eggs without negative effects to the fish or eggs, thereby enabling detailed investigation of the study species' reproductive ecology. The subcutaneous injection of a visible implant elastomer (VIE) tag is a precise method for the subsequent identification of individual fish, and it can be used with a wide size range of fish, with minimal influence on their survival and behavior. If the study species is a substrate spawner that deposits adhesive eggs, an artificial nest site constructed from polyvinyl chloride (PVC) pipe with the addition of a removable waterproof sheet will facilitate counting and monitoring the eggs, lessening the investigator's influence on the nest-holding and egg-guarding behavior of the fish. Although this basic method entails techniques that are seldom mentioned in detail in research articles, they are fundamental for undertaking experiments that require the captive rearing of a wild fish.

  15. Artificial urinary conduit construction using tissue engineering methods.

    Science.gov (United States)

    Kloskowski, Tomasz; Pokrywczyńska, Marta; Drewa, Tomasz

    2015-01-01

    Incontinent urinary diversion using an ileal conduit is the most popular method used by urologists after bladder cystectomy resulting from muscle invasive bladder cancer. The use of gastrointestinal tissue is related to a series of complications with the necessity of surgical procedure extension which increases the time of surgery. Regenerative medicine together with tissue engineering techniques gives hope for artificial urinary conduit construction de novo without affecting the ileum. In this review we analyzed history of urinary diversion together with current attempts in urinary conduit construction using tissue engineering methods. Based on literature and our own experience we presented future perspectives related to the artificial urinary conduit construction. A small number of papers in the field of tissue engineered urinary conduit construction indicates that this topic requires more attention. Three main factors can be distinguished to resolve this topic: proper scaffold construction along with proper regeneration of both the urothelium and smooth muscle layers. Artificial urinary conduit has a great chance to become the first commercially available product in urology constructed by regenerative medicine methods.

  16. Construction and validation of an ecological version of the Wisconsin Card Sorting Test applied to an elderly population.

    Science.gov (United States)

    Pezzuti, Lina; Mastrantonio, Elisa; Orsini, Arturo

    2013-01-01

    The goal of this project was to construct and validate an ecological version of the Wisconsin Card Sorting Test (WCST) aimed at the elderly. This was accomplished by replacing the geometric stimuli of the traditional version with stimuli belonging to the semantic category of transport vehicles, and by elimination of the color yellow. The results showed the ecological WCST version was preferred over the traditional version and older people felt less tired during test performance. In the two independent normal elderly groups, all pairs of scores that can be derived from the WCST correlated significantly with each other. Six of 11 outcome measures of the traditional WCST-128 (long) version were significantly influenced by age. By contrast, in the WCST-64 (short) version and in the ecological WCST-54 version only one measure was affected by the age variable. No significant effect of education level or gender emerged from the results in any WCST version. Again, the subjects with cognitive deterioration had lower performance in the ecological WCST-54 version than in the two traditional WCST versions. It seems reasonable to assume that the ecological version of WCST is more discriminating and has more advantages than the traditional versions. Further research on individual differences in the performance on this task will increase understanding of the components of the test, and of the variety of factors and possible deficits that could lead to an impaired performance of the test.

  17. [Constructing ecological security patterns in mountain areas based on geological disaster sensitivity: A case study in Yuxi City, Yunnan Province, China.

    Science.gov (United States)

    Peng, Jian; Guo, Xiao Nan; Hu, Yi Na; Liu, Yan Xu

    2017-02-01

    As one of the key topics in the research of landscape ecology, regional ecological security patterns can effectively promote regional sustainable development and terrestrial ecological barriers construction. It is extremely important for middle Yunnan, with frequent disasters and fragile ecolo-gical environment, to construct ecological security patterns so as to effectively avoid the geological disasters, maintain ecosystem health, and promote the coordinated development of regional ecological system and social economic system. Taking Yuxi City as a case study area, this study firstly estimated the ecosystem services importance of water conservation, carbon fixation and oxygen release, soil conservation, and biodiversity according to the basal characteristics of regional ecological environment, and then identified ecological sources in consideration of the quality of integrated ecosystem services and single types. Secondly, the resistance surface based on land use types was modified by the sensitivity of regional geological disasters. Lastly, the ecological corridors were identified using minimum cumulative resistance model, and as a result, the ecological security pattern of Yuxi City was constructed. The results showed that there were 81 patches for ecological sources in Yuxi City, accounting for 38.4% of the total area, and overlaying 75.2% of nature protection areas. The ecological sources were mainly distributed in the western mountainous areas as well as eastern water areas of the city. The length of ecological corridors was 1642.04 km, presenting a spatial pattern of one vertical and three horizontals, and extending along river valleys and fault basins with high vegetation coverage. This paper constructed ecological security patterns in mountainous areas aiming at the characteristics of geological disasters, providing spatial guidance for development and conservation decision-making in mountain areas.

  18. Ecological studies related to the construction of the Defense Waste Processing Facility on the Savannah River Site

    International Nuclear Information System (INIS)

    Scott, D.E.; Chazel, A.C.; Pechmann, J.H.K.; Estes, R.A.

    1993-06-01

    The Defense Waste Processing Facility (DWPF) was built on the Savannah River Site (SRS) during the mid-1980's. The Savannah River Ecology Laboratory (SREL) has completed 14 years of ecological studies related to the construction of the DWPF complex. Prior to construction, the 600-acre site (S-Area) contained a Carolina bay and the headwaters of a stream. Research conducted by the SREL has focused primarily on four questions related to these wetlands: (1) Prior to construction, what fauna and flora were present at the DWPF site and at similar, yet undisturbed, alternative sites? (2) By comparing the Carolina bay at the DWPF site (Sun Bay) with an undisturbed control Carolina bay (Rainbow Bay), what effect is construction having on the organisms that inhabited the DWPF site? (3) By comparing control streams with streams on the periphery of the DWPF site, what effect is construction having on the peripheral streams? (4) How effective have efforts been to lessen the impacts of construction, both with respect to erosion control measures and the construction of ''refuge ponds'' as alternative breeding sites for amphibians that formerly bred at Sun Bay? Through the long-term census-taking of biota at the DWPF site and Rainbow Bay, SREL has begun to evaluate the impact of construction on the biota and the effectiveness of mitigation efforts. Similarly, the effects of erosion from the DWPF site on the water quality of S-Area peripheral streams are being assessed. This research provides supporting data relevant to the National Environmental Policy Act (NEPA) of 1969, the Endangered Species Act of 1973, Executive Orders 11988 (Floodplain Management) and 11990 (Protection of Wetlands), and United States Department of Energy (DOE) Guidelines for Compliance with Floodplain/Wetland Environmental Review Requirements (10 CFR 1022)

  19. [Study on interventions based on systematic ecological system construction to interrupt transmission of schistosomiasis in hilly endemic regions].

    Science.gov (United States)

    Jia, Xu; Xue-Xiang, Wan; Lin, Chen; Bo, Zhong; Yi, Zhang

    2016-10-13

    To study the effectiveness of comprehensive control measures based on systematic ecological system construction to interrupt the transmission of schistosomiasis in hilly endemic regions in Sichuan Province, so as to provide the evidence for adjustment of schistosomiasis prevention and control strategies. A high endemic area of schistosomiasis, Panao Township of Dongpo District in Meishan City, was selected as a demonstration area. The comprehensive measures for schistosomiasis control with focus on systematic ecological management were implemented, and the income of residents, indexes of schistosomiasis control effect and so on were investigated before and after the intervention and the results were compared. The project based on systematic ecological system construction started in 2009 and 317.351 million Yuan was put into the construction. The construction included economic forest plant base (1 866.68 hm 2 , 72.66% of the total farmland areas), ecological protection gardens (585.35 hm 2 ) and so on. Totally 97.04% of historical areas with Oncomelania hupensis snails were comprehensively improved. In 2015, the peasants´ pure income per capita increased 4 938 Yuan, with the average annual growth rate of 14.69%. All the farm cattle were replaced by the machine. The benefit rate of water improvement was increased by 52.84% and the coverage rate of harmless toilets increased by 18.30%. The positive rate of serological tests for schistosomiasis decreased from 7.69% to 3.50%, and the positive rate of parasitological tests decreased from 1.18% to 0. The area with snails was decreased from 23.33 hm 2 to 0. The awareness rate of schistosomiasis control knowledge and correct behavior rate of the residents increased from 85.50% and 82.60% to 95.70% and 93.90% respectively. The comprehensive schistosomiasis control measures based on systematic ecological management are conform to the currently actual schistosomiasis prevention and control work in hilly endemic regions, and

  20. Estimating bacterial diversity for ecological studies: methods, metrics, and assumptions.

    Directory of Open Access Journals (Sweden)

    Julia Birtel

    Full Text Available Methods to estimate microbial diversity have developed rapidly in an effort to understand the distribution and diversity of microorganisms in natural environments. For bacterial communities, the 16S rRNA gene is the phylogenetic marker gene of choice, but most studies select only a specific region of the 16S rRNA to estimate bacterial diversity. Whereas biases derived from from DNA extraction, primer choice and PCR amplification are well documented, we here address how the choice of variable region can influence a wide range of standard ecological metrics, such as species richness, phylogenetic diversity, β-diversity and rank-abundance distributions. We have used Illumina paired-end sequencing to estimate the bacterial diversity of 20 natural lakes across Switzerland derived from three trimmed variable 16S rRNA regions (V3, V4, V5. Species richness, phylogenetic diversity, community composition, β-diversity, and rank-abundance distributions differed significantly between 16S rRNA regions. Overall, patterns of diversity quantified by the V3 and V5 regions were more similar to one another than those assessed by the V4 region. Similar results were obtained when analyzing the datasets with different sequence similarity thresholds used during sequences clustering and when the same analysis was used on a reference dataset of sequences from the Greengenes database. In addition we also measured species richness from the same lake samples using ARISA Fingerprinting, but did not find a strong relationship between species richness estimated by Illumina and ARISA. We conclude that the selection of 16S rRNA region significantly influences the estimation of bacterial diversity and species distributions and that caution is warranted when comparing data from different variable regions as well as when using different sequencing techniques.

  1. The Operation Method of Smarter City Based on Ecological Theory

    Science.gov (United States)

    Fan, C.; Fan, H. Y.

    2017-10-01

    As the city and urbanization’s accelerated pace has caused galloping population, the urban framework is extending with increasingly complex social problems. The urban management tends to become complicated and the governance seems more difficult to pursue. exploring the urban management’s new model has attracted local governments’ urgent attention. tcombines the guiding ideology and that management’s practices based on ecological theory, explains the Smarter city Ecology Managementmodel’s formation, makes modern urban management’s comparative analysis and further defines the aforesaid management mode’s conceptual model. Based on the smarter city system theory’s ecological carrying capacity, the author uses mathematical model to prove the coordination relationship between the smarter city Ecology Managementmode’s subsystems, demonstrates that it can improve the urban management’s overall level, emphasizes smarter city management integrity, believing that urban system’s optimization is based on each subsystem being optimized, attaching the importance to elements, structure, and balance between each subsystem and between internal elements. Through the establishment of the smarter city Ecology Managementmodel’s conceptual model and theoretical argumentation, it provides a theoretical basis and technical guidance to that model’s innovation.

  2. Evaluation method of radon preventing effect in underground construction

    International Nuclear Information System (INIS)

    Luo Shaodong; Deng Yuequan; Dong Faqin; Qu Ruixue; Xie Zhonglei

    2014-01-01

    Background: It's difficult to evaluate the radon prevention effect because of the short operating time of measuring instrument under the circumstances of high humidity in underground construction. Purpose: A new rapid method to evaluate the radon prevention efficiency of underground construction was introduced. Methods: The radon concentrations before and after shielding operation were determined, and according to the regularity of radon decay, the shielding rate can be calculated. Results: The results showed that radon shielding rate in underground construction remains generally stable with variation of time, and the actual relatively standard deviation was 3.95%. So the rapid determination and evaluation of radon preventing effect under special conditions in underground construction can be realized by taking shielding rate in a short time for the final shielding rate. Compared with those by the local static method in ground lab, the results were similar. Conclusion: This paper provided a prompt, accurate and practicable way for the evaluation of radon prevention in underground construction, having a certain reference value. (authors)

  3. Optimization and control methods in industrial engineering and construction

    CERN Document Server

    Wang, Xiangyu

    2014-01-01

    This book presents recent advances in optimization and control methods with applications to industrial engineering and construction management. It consists of 15 chapters authored by recognized experts in a variety of fields including control and operation research, industrial engineering, and project management. Topics include numerical methods in unconstrained optimization, robust optimal control problems, set splitting problems, optimum confidence interval analysis, a monitoring networks optimization survey, distributed fault detection, nonferrous industrial optimization approaches, neural networks in traffic flows, economic scheduling of CCHP systems, a project scheduling optimization survey, lean and agile construction project management, practical construction projects in Hong Kong, dynamic project management, production control in PC4P, and target contracts optimization.   The book offers a valuable reference work for scientists, engineers, researchers and practitioners in industrial engineering and c...

  4. Jiangsu coastal highland reclamation and its wetland ecological construction-a case analysis of the Tiaozini reclamation project

    Science.gov (United States)

    Yu, Meixiu; Xu, Xianghong

    2017-04-01

    ,developing more suitable water bird habitats by reserving natural ecological wetland and restoring affected wetland. The TRP is attempting to be built as an ecological cultivation demonstration integrated with ecological restoration, science research and education, and ecological leisure respectively. To better protecting and restoring tidal wetland, and for sustainable utilization and management of wetland resource, Jiangsu coast development group CO., Ltd (it is in charge of the TRP reclamation and development), Hohai University and Deltares signed a triple cooperation strategic framework agreement, co-building the Jiangsu Province coastal development and ecological construction engineering center. Besides, routine surveys in ecological, hydrological, topographic data in/around the TRP are also carrying out as well as the ecological compensations.

  5. Construction of extended exponential general linear methods 524 ...

    African Journals Online (AJOL)

    This paper introduces a new approach for constructing higher order of EEGLM which have become very popular and novel due to its enviable stability properties. This paper also shows that methods 524 is stable with its characteristics root lies in a unit circle. Numerical experiments indicate that Extended Exponential ...

  6. Research methods of the parameters of residential buildings construction

    Directory of Open Access Journals (Sweden)

    Grigor’ev Vladimir Aleksandrovich

    Full Text Available The analysis of construction theory and practice shows that rational organizational and technological parameters of the construction of residential buildings should be based on the manifestation in time and space of the most important stages construction with their harmonization. Basing on the experience of normalizing the construction duration, it is advisable to express the complex of residential buildings’ construction processes by their basic stages - preparatory period, underground part, aboveground part, external engineering networks and land improvement. The main indicators of the development and implementation of optimization solutions are: the total duration of the construction, the duration of the preparation period, the duration of the construction of the underground part, the duration of the construction of the aboveground part, the duration of external engineering networks laying, the duration of land improvement. The indicators of the total duration of the construction of residential buildings, the construction the underground and aboveground parts are determined on the basis of the operation of one assembly crane on an object of up to four sections. In case of more sections two (three cranes are considered and the total construction duration is set depending on these conditions. The duration of the construction of multisectional buildings is determined basing on the simultaneous construction of the stages or their combination with a certain time shift. However, this approach requires a significant amount of optimization solutions due to its multivariance. Therefore, in order to reduce the volume of calculations in some cases, for example, when planning the development of districts and neighborhoods, statistical methods can be used for determining the duration of the construction basing on the compilation of optimization solutions. The total duration of the construction and the duration of the main stages are multiple

  7. Ecological Wisdom and Inspiration Underlying the Planning and Construction of Ancient Human Settlements: Case Study of Hongcun UNESCO World Heritage Site in China

    Directory of Open Access Journals (Sweden)

    Shanwen Zheng

    2018-04-01

    Full Text Available Human settlements are social-economic-natural complex ecosystems centered on human activities and the most prominent site for the contradictions between humans and the environment. Taking Hongcun, a UNESCO World Heritage site in China, as an example, this paper analyzes the methods and effect of coupling man and nature in Hongcun, summarizes the ecological wisdom of dealing with the relationship between human and nature, and uses this wisdom to shed light on the planning, construction, and management of contemporary urban and rural settlements. Firstly, the study introduces the Human-Natural Intergraded Ecological Planning (HNIEP model’s hypothesis, explaining its foundation and potential principles or approaches. Secondly, using the case study of Hongcun to explain, support, and validate the HNIEP model and its framework, the study found that the unique planning and construction of Hongcun has greatly promoted ecosystem services, such as local microclimate regulation, rainwater runoff regulation, water conservation, landscape aesthetic, and engagement with nature. Thirdly, Hongcun reflects the concept of harmonious coexistence between human and nature, the wisdom of rational use of ecosystem structures, processes and functions, and the wisdom of coupling human activities with the living environment and natural ecosystem. Finally, the paper summarizes the enlightenment brought by both the HNIEP model and Hongcun wisdom to contemporary urban-rural planning and construction management.

  8. Making research relevant? Ecological methods and the ecosystem services framework

    Science.gov (United States)

    Root-Bernstein, Meredith; Jaksic, Fabián. M.

    2017-07-01

    We examine some unexpected epistemological conflicts that arise at the interfaces between ecological science, the ecosystem services framework, policy, and industry. We use an example from our own research to motivate and illustrate our main arguments, while also reviewing standard approaches to ecological science using the ecosystem services framework. While we agree that the ecosystem services framework has benefits in its industrial applications because it may force economic decision makers to consider a broader range of costs and benefits than they would do otherwise, we find that many alignments of ecology with the ecosystem services framework are asking questions that are irrelevant to real-world applications, and generating data that does not serve real-world applications. We attempt to clarify why these problems arise and how to avoid them. We urge fellow ecologists to reflect on the kind of research that can lead to both scientific advances and applied relevance to society. In our view, traditional empirical approaches at landscape scales or with place-based emphases are necessary to provide applied knowledge for problem solving, which is needed once decision makers identify risks to ecosystem services. We conclude that the ecosystem services framework is a good policy tool when applied to decision-making contexts, but not a good theory either of social valuation or ecological interactions, and should not be treated as one.

  9. NUMERICAL AND ANALYTIC METHODS OF ESTIMATION BRIDGES’ CONSTRUCTIONS

    Directory of Open Access Journals (Sweden)

    Y. Y. Luchko

    2010-03-01

    Full Text Available In this article the numerical and analytical methods of calculation of the stressed-and-strained state of bridge constructions are considered. The task on increasing of reliability and accuracy of the numerical method and its solution by means of calculations in two bases are formulated. The analytical solution of the differential equation of deformation of a ferro-concrete plate under the action of local loads is also obtained.

  10. Analysis of construction dynamic plan using fuzzy critical path method

    Directory of Open Access Journals (Sweden)

    Kurij Kazimir V.

    2014-01-01

    Full Text Available Critical Path Method (CPM technique has become widely recognized as valuable tool for the planning and scheduling large construction projects. The aim of this paper is to present an analytical method for finding the Critical Path in the precedence network diagram where the duration of each activity is represented by a trapezoidal fuzzy number. This Fuzzy Critical Path Method (FCPM uses a defuzzification formula for trapezoidal fuzzy number and applies it on the total float (slack time for each activity in the fuzzy precedence network to find the critical path. The method presented in this paper is very effective in determining the critical activities and finding the critical paths.

  11. Simulation of tunneling construction methods of the Cisumdawu toll road

    Science.gov (United States)

    Abduh, Muhamad; Sukardi, Sapto Nugroho; Ola, Muhammad Rusdian La; Ariesty, Anita; Wirahadikusumah, Reini D.

    2017-11-01

    Simulation can be used as a tool for planning and analysis of a construction method. Using simulation technique, a contractor could design optimally resources associated with a construction method and compare to other methods based on several criteria, such as productivity, waste, and cost. This paper discusses the use of simulation using Norwegian Method of Tunneling (NMT) for a 472-meter tunneling work in the Cisumdawu Toll Road project. Primary and secondary data were collected to provide useful information for simulation as well as problems that may be faced by the contractor. The method was modelled using the CYCLONE and then simulated using the WebCYCLONE. The simulation could show the duration of the project from the duration model of each work tasks which based on literature review, machine productivity, and several assumptions. The results of simulation could also show the total cost of the project that was modeled based on journal construction & building unit cost and online websites of local and international suppliers. The analysis of the advantages and disadvantages of the method was conducted based on its, wastes, and cost. The simulation concluded the total cost of this operation is about Rp. 900,437,004,599 and the total duration of the tunneling operation is 653 days. The results of the simulation will be used for a recommendation to the contractor before the implementation of the already selected tunneling operation.

  12. Modern Methods for Cost Management in Construction Enterprises

    Directory of Open Access Journals (Sweden)

    Mesároš Peter

    2015-06-01

    Full Text Available Cost management should be seen as an essential function of enterprises which perform their activities in current market environment. One of the main factors affecting the level of achieved profit and favourable market position is cost structure. The company's ability to obtain necessary and reliable information on their own cost, subsequent processing and effective cost management is crucial for achieving success. This study focuses on cost management and the use of modern methods of cost management in construction enterprises. The aim of this paper is to identify approaches to cost management in Slovak construction enterprises, based on own empirical research.

  13. Textile materials for lightweight constructions technologies, methods, materials, properties

    CERN Document Server

    2016-01-01

    In this book, experts on textile technologies convey both general and specific informa­tion on various aspects of textile engineering, ready-made technologies, and textile chemistry. They describe the entire process chain from fiber materials to various yarn constructions, 2D and 3D textile constructions, preforms, and interface layer design. In addition, the authors introduce testing methods, shaping and simulation techniques for the characterization of and structural mechanics calculations on anisotropic, pliable high-performance textiles, including specific examples from the fields of fiber plastic composites, textile concrete, and textile membranes. Readers will also be familiarized with the potential offered by increasingly popular textile structures, for instance in the fields of composite technology, construction technology, security technology, and membrane technology. Textile materials and semi-finished products have widely varied potential characteristics, and are commonly used as essential element...

  14. Modification of a recuperator construction with CFD methods

    Directory of Open Access Journals (Sweden)

    Ludwig Wojciech

    2017-12-01

    Full Text Available The purpose of the work was initial modification of the construction of a commercially produced heat exchanger – recuperator with CFD (computational fluid dynamics methods, based on designs and process parameters which were provided. Uniformity of gas distribution in the space between the tubes of the apparatus as well as the pressure drop in it were taken as modification criteria. Uniformity of the gas velocity field between the tubes of the heat exchanger should cause equalization of the local individual heat transfer coefficient values and temperature value. Changes of the apparatus construction which do not worsen work conditions of the equipment, but cause savings of constructional materials (elimination or shortening some parts of the apparatus were taken into consideration.

  15. Interactive valuation : the social construction of the value of ecological services

    NARCIS (Netherlands)

    Jiggins, J.; Röling, N.

    1999-01-01

    Two different perspectives mark the discourse about the valuation of ecological services: (i) a positivist-realist perspective, and (ii) a constructivist perspective. The implications of the constructivist perspective for valuation are presented. First, is analyzed the current dominant practice of

  16. Development of ecologically safe method for main oil and gas pipeline trenching

    Directory of Open Access Journals (Sweden)

    Akhmedov Asvar Mikdadovich

    2014-05-01

    Full Text Available Constructive, technical and technological reliability of major pipeline ensures ecological safety on different stages of life circle - beginning with project preparation activities up to the end of major pipeline operation. Even in the process of transition into new life circle stage, no matter if the pipeline needs major repairs or reconstruction, such technical and technological solutions should be found, which would preserve ecological stability of nature-anthropogenic system. Development of ecology protection technologies of construction, reconstruction and major repairs of main pipelines is of great importance not only for a region, but ensures ecological safety across the globe. The article presents a new way of trenching the main oil and gas pipeline, preservation and increase of ecological safety during its service. The updated technological plan is given in the paper for overhaul of the main oil and gas pipeline using the new technology of pipeline trenching. The suggested technical solution contributes to environment preservation with the help of deteriorating shells - the shells’ material decomposes into environment-friendly components: carbon dioxide, water and humus. The quantity of polluting agents in the atmosphere decreases with the decrease of construction term and quantity of technical equipment.

  17. Alternative constructive methods for construction and assembly of ducts in flooded areas

    Energy Technology Data Exchange (ETDEWEB)

    Machado, Otto L.M.; Gomes, Antonio E.; Loureiro, Mauro O. [Petroleo do Brasil S.A. (PETROBRAS), Rio de Janeiro, RJ (Brazil)

    2009-07-01

    The challenge of constructing the gas pipeline Urucu-Coari-Manaus, which has 662 kilometers of extension, from the Base of Operations Geologist Peter de Moura, in Urucu, to the Isaac Sabba Refinery - REMAN, in the city of Manaus, challenged PETROBRAS to search for innovative solutions in the construction of terrestrial ducts in Brazil. The introduction of these solutions was made necessary in view of, mainly, great difficulties of logistic imposed by the Amazonian forest, place where the enterprise in question was implemented. Of the new used techniques, the air transportation of pipes by cargo helicopters, the assembly of columns on pontoon ferries, opening ditches using excavators placed on 'H' shaped pontoon ferries and welding tie-in joints on a system of floating porches (pontoon ferries), must be emphasized. This work will be dedicated specifically to non-conventional constructive methods employed to overcome the construction difficulties due to the instability of the ground of flooded areas in the Amazonian forest, which during 6 (six) months of the year are total and/or partially submerged. (author)

  18. A new method for analysing socio-ecological patterns of vulnerability

    OpenAIRE

    Kok, M.; Lüdeke, M.; Lucas, P.; Sterzel, T.; Walther, C.; Janssen, P.; Sietz, D.; de Soysa, I.

    2016-01-01

    This paper presents a method for the analysis of socio-ecological patterns of vulnerability of people being at risk of losing their livelihoods as a consequence of global environmental change. This method fills a gap in methodologies for vulnerability analysis by providing generalizations of the factors that shape vulnerability in specific socio-ecological systems and showing their spatial occurrence. The proposed method consists of four steps that include both quantitative and qualitative an...

  19. Hydrologic, ecologic, and geomorphic responses of Brewery Creek to construction of a residential subdivision, Dane County, Wisconsin, 1999-2002

    Science.gov (United States)

    Selbig, William R.; Jopke, Peter L.; Marhshall, David W.; Sorge, Michael J.

    2004-01-01

    The U.S. Geological Survey (USGS), in cooperation with the Dane County Land Conservation Department (LCD) and the Wisconsin Department of Natural Resources (DNR), investigated the instream effects from construction of a residential subdivision on Brewery Creek in Dane County, Wisconsin. The purpose of the investigation was to determine whether a variety of storm-runoff and erosion-control best-management practices (BMPs) would effectively control the overall sediment load, as well as minimize any hydrologic, ecologic, and geomorphic stresses to Brewery Creek.

  20. Field Testing of Compartmentalization Methods for Multifamily Construction

    Energy Technology Data Exchange (ETDEWEB)

    Ueno, K. [Building Science Corporation, Westford, MA (United States); Lstiburek, J. [Building Science Corporation, Westford, MA (United States)

    2015-03-01

    The 2012 IECC has an airtightness requirement of 3 air changes per hour at 50 Pascals test pressure for both single-family and multifamily construction in Climate Zones 3-8. Other programs (LEED, ASHRAE 189, ASHRAE 62.2) have similar or tighter compartmentalization requirements, driving the need for easier and more effective methods of compartmentalization in multifamily buildings. Builders and practitioners have found that fire-resistance rated wall assemblies are a major source of difficulty in air sealing/compartmentalization, particularly in townhouse construction. This problem is exacerbated when garages are “tucked in” to the units and living space is located over the garages. In this project, Building Science Corporation examined the taping of exterior sheathing details to improve air sealing results in townhouse and multifamily construction, when coupled with a better understanding of air leakage pathways. Current approaches are cumbersome, expensive, time consuming, and ineffective; these details were proposed as a more effective and efficient method. The effectiveness of these air sealing methods was tested with blower door testing, including “nulled” or “guarded” testing (adjacent units run at equal test pressure to null out inter-unit air leakage, or “pressure neutralization”). Pressure diagnostics were used to evaluate unit-to-unit connections and series leakage pathways (i.e., air leakage from exterior, into the fire-resistance rated wall assembly, and to the interior).

  1. Chemical and ecological control methods for Epitrix spp.

    Directory of Open Access Journals (Sweden)

    A. G. S. Cuthbertson

    2015-01-01

    Full Text Available Very little information exists in regards to the control options available for potato flea beetles, Epitrix spp. This short review covers both chemical and ecological options currently available for control of Epitrix spp. Synthetic pyrethroids are the weapon of choice for the beetles. However, the impetus in integrated pest management is to do timely (early-season applications with something harsh which will give long-term protection at a time when there are not a lot of beneficials in the field. Finding the balance for control of Epitrix spp. is proving difficult.

  2. Do we understand children's restlessness? Constructing ecologically valid understandings through reflexive cooperation

    Directory of Open Access Journals (Sweden)

    Anna Helle-Valle

    2015-12-01

    Full Text Available Attention-deficit/hyperactivity disorder (ADHD is the most widely used children's mental health diagnosis today, but the validity of the diagnosis is controversial, for instance, because it might conceal relational and ecological dimensions of restlessness. We invited parents and professionals from one local community in western Norway to participate in cooperative group discussions on how to conceptualize and understand children's restlessness. We carried out a thematic and reflexive analysis of the cooperative group discussions on ADHD and children's restlessness, and present findings related to three ecological levels inspired by Bronfenbrenner's ecological systems model. At the level of the individual, restlessness was discussed as individual trait, as the expectation to be seen and heard, and as a result of traumatization. At the level of dyad, group or family, restlessness was discussed as a relational phenomenon and as parents' problems. At the level of community, restlessness was discussed as lack of cooperation and lack of structures or resources. Our findings show how contextualized and cooperative reflexivity can contribute to more valid understandings of children's restlessness, and how cooperative inquiry can stimulate reflections about solidarity and sustainability in relation to adult's actions.

  3. Semi top-down method combined with earth-bank, an effective method for basement construction.

    Science.gov (United States)

    Tuan, B. Q.; Tam, Ng M.

    2018-04-01

    Choosing an appropriate method of deep excavation not only plays a decisive role in technical success, but also in economics of the construction project. Presently, we mainly base on to key methods: “Bottom-up” and “Top-down” construction method. Right now, this paper presents an another method of construction that is “Semi Top-down method combining with earth-bank” in order to take the advantages and limit the weakness of the above methods. The Bottom-up method was improved by using the earth-bank to stabilize retaining walls instead of the bracing steel struts. The Top-down method was improved by using the open cut method for the half of the earthwork quantities.

  4. The ecological and construct validity of a newly developed measure of executive function: the Virtual Library Task.

    Science.gov (United States)

    Renison, Belinda; Ponsford, Jennie; Testa, Renee; Richardson, Barry; Brownfield, Kylie

    2012-05-01

    Virtual reality (VR) assessment paradigms have the potential to address the limited ecological validity of pen and paper measures of executive function (EF) and the pragmatic and reliability issues associated with functional measures. To investigate the ecological validity and construct validity of a newly developed VR measure of EF, the Virtual Library Task (VLT); a real life analogous task--the Real Library Task (RLT); and five neuropsychological measures of EF were administered to 30 patients with traumatic brain injury (TBI) and 30 healthy Controls. Significant others for each participant also completed the Dysexecutive Questionnaire (DEX), which is a behavioral rating scale of everyday EF. Performances on the VLT and the RLT were significantly positively correlated indicating that VR performance is similar to real world performance. The TBI group performed significantly worse than the Control group on the VLT and the Modified Six Elements Test (MSET) but the other four neuropsychological measures of EF failed to differentiate the groups. Both the MSET and the VLT significantly predicted everyday EF suggesting that they are both ecologically valid tools for the assessment of EF. The VLT has the advantage over the MSET of providing objective measurement of individual components of EF.

  5. Early Warning Signals of Ecological Transitions: Methods for Spatial Patterns

    Science.gov (United States)

    Brock, William A.; Carpenter, Stephen R.; Ellison, Aaron M.; Livina, Valerie N.; Seekell, David A.; Scheffer, Marten; van Nes, Egbert H.; Dakos, Vasilis

    2014-01-01

    A number of ecosystems can exhibit abrupt shifts between alternative stable states. Because of their important ecological and economic consequences, recent research has focused on devising early warning signals for anticipating such abrupt ecological transitions. In particular, theoretical studies show that changes in spatial characteristics of the system could provide early warnings of approaching transitions. However, the empirical validation of these indicators lag behind their theoretical developments. Here, we summarize a range of currently available spatial early warning signals, suggest potential null models to interpret their trends, and apply them to three simulated spatial data sets of systems undergoing an abrupt transition. In addition to providing a step-by-step methodology for applying these signals to spatial data sets, we propose a statistical toolbox that may be used to help detect approaching transitions in a wide range of spatial data. We hope that our methodology together with the computer codes will stimulate the application and testing of spatial early warning signals on real spatial data. PMID:24658137

  6. Under niche construction: an operational bridge between ecology, evolution, and ecosystem science

    NARCIS (Netherlands)

    Matthews, B.; De Meester, L.; Jones, C.G.; Ibelings, B.W.; Bouma, T.J.; Nuutinen, V.; van de Koppel, J.; Odling-Smee, J.

    2014-01-01

    All living organisms modify their biotic and abiotic environment. Niche construction theory posits that organism-mediated modifications to the environment can change selection pressures and influence the evolutionary trajectories of natural populations. While there is broad support for this

  7. Hydromechanical properties of some mortars used in some ecologic construction techniques

    OpenAIRE

    Hoxha , Dashnor; Vladimir Nicolae , Ungureanu; Belayachi , Naima; Duc Phi , Do

    2012-01-01

    International audience; This paper presents results of hydromechanical characterization tests performed on some mortars used in eco-construction practice. Typically, such mortars could be found in buildings constructed following so called GREB technique that uses straw bales as structural and insulating elements in addition to a wood frame. The full experimental program includes thermal, mechanical and hydraulic - hygroscopic tests. Mechanical tests, including uniaxial compression test and th...

  8. Application of photonuclear methods of analysis in biology, medicine, ecological studies

    International Nuclear Information System (INIS)

    Burmistenko, Yu.N.

    1986-01-01

    Examples of application of photonuclear methods of analysis (PhMA) of the substance composition in biology, medicine, ecology are considered. The methods for determining the element composition of soft and bone tissues, blood, urine are developed. The results of studying the limits of determination of different elements are presented. In ecological investigations PhMA is applied for studying the composition of atmospheric aerosols, industrial sewage, canalization wastes, pollution of soil, plants, animals with toxic elements

  9. VARIATIONS OF THE ENERGY METHOD FOR STUDYING CONSTRUCTION STABILITY

    Directory of Open Access Journals (Sweden)

    A. M. Dibirgadzhiev

    2017-01-01

    Full Text Available Objectives. The aim of the work is to find the most rational form of expression of the potential energy of a nonlinear system with the subsequent use of algebraic means and geometric images of catastrophe theory for studying the behaviour of a construction under load. Various forms of stability criteria for the equilibrium states of constructions are investigated. Some aspects of the using various forms of expression of the system’s total energy are considered, oriented to the subsequent use of the catastrophe theory methods for solving the nonlinear problems of construction calculation associated with discontinuous phenomena.Methods. According to the form of the potential energy expression, the mathematical description of the problem being solved is linked to a specific catastrophe of a universal character from the list of catastrophes. After this, the behaviour of the system can be predicted on the basis of the fundamental propositions formulated in catastrophe theory without integrating the corresponding system of nonlinear differential equations of high order in partial derivatives, to which the solution of such problems is reduced.Results. The result is presented in the form of uniform geometric images containing all the necessary qualitative and quantitative information about the deformation of whole construction classes under load for a wide range of changes in the values of external (control and internal (behavioural parameters.Conclusion. Methods based on catastrophe theory are an effective mathematical tool for solving non-linear boundary-value problems with parameters associated with discontinuous phenomena, which are poorly analysable by conventional methods. However, they have not yet received due attention from researchers, especially in the field of stability calculations, which remains a complex, relevant and attractive problem within structural mechanics. To solve a concrete nonlinear boundary value problem for calculating

  10. Marine Ecological Environment Management Based on Ecological Compensation Mechanisms

    Directory of Open Access Journals (Sweden)

    Qunzhen Qu

    2016-12-01

    Full Text Available The level of marine environmental management is a key factor in the successful implementation of marine power strategies. The improvement in management levels of marine environments requires innovation in marine management. In other words, the transformation of marine environmental management into marine ecological environment management must be done in order to achieve sustainable development of the marine economy. As an environmental economic policy that combines both administrative and market measures, ecological compensation mechanisms have significant advantages in marine ecological environment management. Based on the study of the current development of ecological compensation mechanisms in China, through the analysis of the connotation of marine ecological civilization, existing marine ecological protection practices and marine environmental management methods, this paper posits that the current marine ecological environment management in China should be established on the basis of ecological compensation mechanisms. At present, a lack of laws and regulations for overall marine ecological environment management is the key factor restricting the practice of marine ecological environment management. Therefore, it is necessary to explore the current path of marine ecological environment management in China from the perspective of the construction of legal system of ecological compensation law, the establishment of ecological compensation fees, ecological taxes and ecological compensation fund systems, and the clear status for a marine ecological management and supervision body.

  11. [Ecological regionalization of national cotton fiber quality in China using GGE biplot analysis method].

    Science.gov (United States)

    Xu, Nai Yin; Jin, Shi Qiao; Li, Jian

    2017-01-01

    The distinctive regional characteristics of cotton fiber quality in the major cotton-producing areas in China enhance the textile use efficiency of raw cotton yarn by improving fiber quality through ecological regionalization. The "environment vs. trait" GGE biplot analysis method was adopted to explore the interaction between conventional cotton sub-regions and cotton fiber quality traits based on the datasets collected from the national cotton regional trials from 2011 to 2015. The results showed that the major cotton-producing area in China were divided into four fiber quality ecological regions, namely, the "high fiber quality ecological region", the "low micronaire ecological region", the "high fiber strength and micronaire ecological region", and the "moderate fiber quality ecological region". The high fiber quality ecological region was characterized by harmonious development of cotton fiber length, strength, micronaire value and the highest spinning consistency index, and located in the conventional cotton regions in the upper and lower reaches of Yangtze River Valley. The low micronaire value ecological region composed of the northern and south Xinjiang cotton regions was characterized by low micronaire value, relatively lower fiber strength, and relatively high spinning consistency index performance. The high fiber strength and micronaire value ecological region covered the middle reaches of Yangtze River Valley, Nanxiang Basin and Huaibei Plain, and was prominently characterized by high strength and micronaire value, and moderate performance of other traits. The moderate fiber quality ecological region included North China Plain and Loess Plateau cotton growing regions in the Yellow River Valley, and was characterized by moderate or lower performances of all fiber quality traits. This study effectively applied "environment vs. trait" GGE biplot to regionalize cotton fiber quality, which provided a helpful reference for the regiona-lized cotton growing

  12. An assessment of potential hydrologic and ecologic impacts of constructing mitigation wetlands, Rifle, Colorado, UMTRA project sites

    International Nuclear Information System (INIS)

    1995-04-01

    This-assessment examines the consequences and risks that could result from the proposed construction of mitigation wetlands at the New and Old Rifle Uranium Mill Tailings Remedial Action (UMTRA) Project sites near Rifle, Colorado. Remediation of surface contamination at those sites is now under way. Preexisting wetlands at or near the Old and New Rifle sites have been cleaned up, resulting in the loss of 0.7 and 10.5 wetland acres (ac) (0.28 and 4.2 hectares [ha]) respectively. Another 9.9 ac (4.0 ha) of wetlands are in the area of windblown contamination west of the New Rifle site. The US Army Corps of Engineers (USACE) has jurisdiction over the remediated wetlands. Before remedial action began, and before any wetlands were eliminated, the USACE issued a Section 404 Permit that included a mitigation plan for the wetlands to be lost. The mitigation plan calls for 34.2 ac (1 3.8 ha) of wetlands to be constructed at the south end and to the west of the New Rifle site. The mitigation wetlands would be constructed over and in the contaminated alluvial aquifer at the New Rifle site. As a result of the hydrologic characteristics of this aquifer, contaminated ground water would be expected to enter the environment through the proposed wetlands. A preliminary assessment was therefore required to assess any potential ecological risks associated with constructing the mitigation wetlands at the proposed location

  13. The Construction of Higher Education Entrepreneur Services Network System a Research Based on Ecological Systems Theory

    Science.gov (United States)

    Xue, Jingxin

    The article aims to completely, systematically and objectively analyze the current situation of Entrepreneurship Education in China with Ecological Systems Theory. From this perspective, the author discusses the structure, function and its basic features of higher education entrepreneur services network system, and puts forward the opinion that every entrepreneurship organization in higher education institution does not limited to only one platform. Different functional supporting platforms should be combined closed through composite functional organization to form an integrated network system, in which each unit would impels others' development.

  14. Utilizing Ecological Health Index to Monitor Grazingland Ecological Health: A Quick and Flexible Method for Ranchers and Farmers

    Science.gov (United States)

    Xu, S.; Borrelli, P. R.; Raven, M. R.; Rowntree, J. E.

    2017-12-01

    Grazing lands should be monitored to ensure their long-term productivity and sustainability. While monitoring protocols do exist, there is a need to simplify procedures for land managers while maintaining efficacy in order to increase usage. The objective in this study was to investigate the effectiveness of an Ecological Health Index (EHI) on indicating ecological health in grazing lands. We introduced the EHI, which was derived by synthesizing vegetation and soil cover indicators already existing in the literature to ranchers in Patagonia. Additionally, we implemented long-term transects at 44 farms from two ecological regions in Patagonia, the non-brittle Humid Magellan Steppe (HMS) (n=24) and the brittle Subandean Grasslands (SG) (n=20), to collect quantitative vegetative and soil measurements and correlated this back to EHI. In the non-brittle area HMS with even distribution of rainfall and good temperature which can support more plant biomass, the EHI ranged from -40 to 65 with a mean of 12.5 ± 24. The EHI from brittle SG ranged from -80 to 75 with a mean of 1.25 ± 35, which was 90% lower than the mean non-brittle EHI. From a quantitative perspective, HMS had greater species richness compared to SG (27 vs. 20, P=0.0003). Similarly, the average percentage of total live vegetation was higher in HMS than that in SG (77% vs. 48%, P pavement percentage and bare ground + erosion pavement (P < 0.05). These results suggest that EHI could be a useful method to detect the ecological health and productivity in grazing lands. Overall, we conclude that EHI is an effective short and long-term monitoring approach that ranchers could easily use annually to monitor grazing lands and determine the impacts of ranch decision-making on important ecosystem indicators.

  15. Ergonomic lumbar risk analysis of construction workers by NIOSH method

    Directory of Open Access Journals (Sweden)

    Cinara Caetano Pereira

    2015-09-01

    Full Text Available Work in construction has tasks directly connected with manual transport. One of the body segments suffering greater demand in works with these characteristics is the lumbar spine segment. The aim of this study was to analyze the level of risk of lumbar construction workers in the shipment of materials. The sample was composed of 74 construction workers. Were used as a research tool: the NIOSH method for lumbar risk verification expressed by weight limit recommended (WPR and the lifting Index (IL, Visual analogue scale (VAS for the evaluation of pain intensity, the e-1 Corlett.0 for the mapping of the pain and Borg to the subjective perception of the intensity of physical exertion. The present study identified the weight limit (WP of 8.707 for management activity of bags of cement for the load of 8.194 wheelbarrows used. These findings are 6 times under actual weights handled during the activities that revolve around 50 kg with the sacks and averaged 49.72 kg stands with mass. The dimensional settings found in the search are at high risk for ergonomic lumbar region, and measures of reconfiguration of workplaces and operation of auxiliary devices for lifting, transporting and unloading are fundamental, in addition to the need for reflection about the current logistical problems that induce producers to supply the cement sacks with 50 kg.

  16. Construction of Industrial Ecosystem of an Electric Company under Ecological Perspective

    Science.gov (United States)

    Li, Xin; Zhang, Yuan; Wu, Han

    2018-01-01

    Be confronted with more and more fierce competition environment, only by constantly integrating, constructing and restructuring internal and external resources as well as capabilities can enterprises adapt themselves to the rapidly changing environment and maintain the advantages of sustained competition. Business competition has changed from product competition of single enterprise to competition of bussiness ecosystem. Therefore, how to build a business system is the key to win competition. This paper draws lessons from business ecosystem and industrial ecosystem concept and takes the subordinate industry company of a large enterprise as the research object. On the the basis of combing its characteristics and organizational structure, an industrial ecosystem is tired to constructed.

  17. Constructing financial network based on PMFG and threshold method

    Science.gov (United States)

    Nie, Chun-Xiao; Song, Fu-Tie

    2018-04-01

    Based on planar maximally filtered graph (PMFG) and threshold method, we introduced a correlation-based network named PMFG-based threshold network (PTN). We studied the community structure of PTN and applied ISOMAP algorithm to represent PTN in low-dimensional Euclidean space. The results show that the community corresponds well to the cluster in the Euclidean space. Further, we studied the dynamics of the community structure and constructed the normalized mutual information (NMI) matrix. Based on the real data in the market, we found that the volatility of the market can lead to dramatic changes in the community structure, and the structure is more stable during the financial crisis.

  18. Field Testing of Compartmentalization Methods for Multifamily Construction

    Energy Technology Data Exchange (ETDEWEB)

    Ueno, K. [Building Science Corporation, Westford, MA (United States); Lstiburek, J. W. [Building Science Corporation, Westford, MA (United States)

    2015-03-01

    The 2012 International Energy Conservation Code (IECC) has an airtightness requirement of 3 air changes per hour at 50 Pascals test pressure (3 ACH50) for single-family and multifamily construction (in climate zones 3–8). The Leadership in Energy & Environmental Design certification program and ASHRAE Standard 189 have comparable compartmentalization requirements. ASHRAE Standard 62.2 will soon be responsible for all multifamily ventilation requirements (low rise and high rise); it has an exceptionally stringent compartmentalization requirement. These code and program requirements are driving the need for easier and more effective methods of compartmentalization in multifamily buildings.

  19. The use of typed lambda calculus for comprehension and construction of simulation models in the domain of ecology

    Science.gov (United States)

    Uschold, Michael

    1992-01-01

    We are concerned with two important issues in simulation modelling: model comprehension and model construction. Model comprehension is limited because many important choices taken during the modelling process are not documented. This makes it difficult for models to be modified or used by others. A key factor hindering model construction is the vast modelling search space which must be navigated. This is exacerbated by the fact that many modellers are unfamiliar with the terms and concepts catered to by current tools. The root of both problems is the lack of facilities for representing or reasoning about domain concepts in current simulation technology. The basis for our achievements in both of these areas is the development of a language with two distinct levels; one for representing domain information, and the other for representing the simulation model. Of equal importance, is the fact that we make formal connections between these two levels. The domain we are concerned with is ecological modelling. This language, called Elklogic, is based on the typed lambda calculus. Important features include a rich type structure, the use of various higher order functions, and semantics. This enables complex expressions to be constructed from relatively few primitives. The meaning of each expression can be determined in terms of the domain, the simulation model, or the relationship between the two. We describe a novel representation for sets and substructure, and a variety of other general concepts that are especially useful in the ecological domain. We use the type structure in a novel way: for controlling the modelling search space, rather than a proof search space. We facilitate model comprehension by representing modelling decisions that are embodied in the simulation model. We represent the simulation model separately from, but in terms of a domain mode. The explicit links between the two models constitute the modelling decisions. The semantics of Elklogic enables

  20. Witnessing in the New Memory Ecology : Memory Construction of the Syrian Conflict on YouTube

    NARCIS (Netherlands)

    Smit, Pieter Hendrik; Broersma, Marcel; Heinrich, Ansgard

    2017-01-01

    With the pervasiveness of mobile technologies, witnesses have the opportunity to mediate up-close and seemingly truthful recordings of events. As such, “witness videos” have become prominent in news reports and serve as authoritative resources in the construction of memory. However, once they are

  1. Biocultural Ecology: Exploring the Social Construction of the Southern Appalachain Ecosystem

    Science.gov (United States)

    David P. Robertson; R. Bruce Hull

    2003-01-01

    The idea of a Southern Appalachian Ecosystem is now so much a part of our everyday language that many of the people who talk, write, and make decisions about thc place are unaware of the long and complicated history behind the idea. One primary purpose of this case study was to demonstrate how the Southern Appalachian Ecosystem has been socially constructed and reified...

  2. Ecological impact from large constructions of hydroelectric power plants in Parana River, Brazil

    International Nuclear Information System (INIS)

    Bonetto, Argentino A.

    1992-01-01

    An analysis over environmental impacts on Parana River as a result of the hydroelectric power plants construction is presented. Hydroelectric dams, also including the planned ones, are showing during the explanation, and biologic aspects are discussed. 30 refs., 4 figs., 2 tabs

  3. Effectiveness of innovation leadership styles: a manager's influence on ecological innovation in construction projects

    OpenAIRE

    Bossink, B.A.G.

    2004-01-01

    This article presents four basic innovation leadership styles: charismatic, instrumental, strategic and interactive innovation leadership. The leadership styles and their characteristics relate to process and product innovations in construction projects. A theoretical framework - which synthesizes these relations enables explorative research into the effects of leadership on organizational innovativeness. Four case studies, observing the same manager in four comparable projects, explore the e...

  4. The Methods for Diagnosing the Attractiveness of Ecological Entrepreneurship in Rural Areas

    Directory of Open Access Journals (Sweden)

    Shuliak Bogdan V.

    2018-03-01

    Full Text Available The study is aimed at substantiating the methods for diagnosing the attractiveness of ecological entrepreneurship in rural areas. The article defines the objectives of diagnosing the attractiveness of ecological entrepreneurship in rural areas. It is determined that the methods for diagnosing the attractiveness of environmentally oriented entrepreneurial activity should take into account its effectiveness in the context of economic, ecological, and social components; current status, dynamics and tendencies of development of basic indicators of attractiveness; relationship between the actual and target values of such indicators. The system of methods which is expedient for use in the process of diagnosing, has been defined as follows: methods of correlation analysis (substantiation of the purposes of diagnostics; coefficient analysis and fuzzy logic methods (estimation of the actual levels of attractiveness indicators; regression analysis and mathematical-statistical method (estimation of tendencies, building of forecasts; cluster analysis, ranking, rationing, and integral estimation (comparative analysis of the estimation results.

  5. "Earthen constructions" - towards creating a sustainable habitat by minimising the ecological footprint

    Directory of Open Access Journals (Sweden)

    Aparna Das

    2008-12-01

    Full Text Available Sustenance of the human race has put an immense pressure on our planet Earth in terms of sustainability of natural resources. The greenhouse effect and the ozone hole are the two most threatening effects of pollution. Constructions of buildings as well as materials contribute to a large percentage to this pollution. Again every material used in the building industry has its source in the Earth. In general the low energy materials will be least polluting. The conventionally used building materials like bricks, cement, steel, timber, plastics, glass etc. usually involve huge transportation costs and also manufacturing processes which are detriment al to the environment. On the other hand the demand for new buildings as well as the cost of building construction is growing a tremendous pace. We have to search for alternative materials which are energy efficient, environment friendly and economical like our traditional building materials - mud walls and thatch roofs. Of all the alternatives available to us which lead the way to sustainability, building with earth has been an ancient and accepted practice among communities all over the world. It is estimated that the construction and the operation of buildings is responsible for around half of all glob al C02 emissions, thereby contributing the largest single source attributable to climate change. Earthen construction has been, is and will continue to be a reality. Stabilised rammed earth walls can be used as a building integrated source of passive cooling technique. A huge population in Indi a lives in the rural areas where there has been a growing trend in shifting towards brick and concrete constructions in search for social status. Even a small percentage can lead to massive increase in glob l C02 emissions if the trend is not checked at this point. This papers looks into the current scenario and hence the corresponding responsibility on architects, planners and policy makers to bring in

  6. [Tourism ecological security early warning of Zhangjiajie, China based on the improved TOPSIS method and the grey GM (1,1)model].

    Science.gov (United States)

    Xu, Mei; Liu, Chun la; Li, Dan; Zhong, Xiao Lin

    2017-11-01

    Tourism ecological security early warning is of great significance both to the coordination of ecological environment protection and tourism industry rapid development in tourism destination, and the sustainable and healthy development of regional social and economy. Firstly, based on the DPSIR model, the tourism ecological security early warning index system of Zhangjiajie was constructed from 5 aspects, which were driving force, pressure, state, impact and response. Then, by using the improved TOPSIS method, the tourism ecological security situation of Zhangjiajie from 2001 to 2014 was analyzed. Lastly, by using the grey GM (1,1) model, the tourism ecological security evolution trend of 2015-2020 was predicted. The results indicated that, on the whole, the close degree of Zhangjiajie's tourism ecological security showed a slightly upward trend during 2001-2014, the warning degree was the moderate warning. In terms of each subsystem, warning degree of the driving force system and the pressure system of Zhangjiajie's tourism ecological secu-rity were on the rise, which evolved from light warning to heavy warning; warning degree of the state system and the impact system had not changed so much, and had been in the moderate warning; warning degree of the response system was on the decline, which changed from huge warning to no warning during 2001-2014. According to the current development trend, the close degree of Zhangjiajie's tourism ecological security would rise further in 2015-2020, and the warning degree would turn from moderate warning into light warning, but the task of coordinating the relationship between tourism development and ecological construction and environmental protection would be still arduous.

  7. Ecological aspects in construction of West Siberian oil field surface facilities

    International Nuclear Information System (INIS)

    Scvortzov, I.D.; Crushin, P.N.

    1991-01-01

    The exploitation of arctic regions, where permanently frozen grounds are widespread, leads to problems concerning the climate and the geo-cryological environment. One of the most urgent tasks is to minimize effects on the environment, otherwise irreversible, catastrophic processes, the deterioration of permafrost into swamps, fouling subsoil waters and rivers, ground surface pollution with petroleum products, and destruction of fish and birds, may occur. The measures aimed at providing the environmental ecological equilibrium during the exploitation of the northern oil deposits of West Siberia are described in this paper. These measures are worked out during the design stage. Then appropriate engineering decisions and product procedures are chosen, where much prominence is given to reliability of the oil and gas field facilities. The paper includes information about developing measures for the preventive systematic maintenance of the oil pipelines, maintenance schedule, prediction of accidents and certain procedures for their rectification

  8. Theoretical and methodological construction of ecological economic and analysis of operations industrial enterprises

    Directory of Open Access Journals (Sweden)

    D.O. Gritsishen

    2015-09-01

    Full Text Available To form an effective analytical maintenance of economic and environmental security of industrial enterprises were justified assumptions of ecological and economic analysis. In particular, the goal (the formation of the effect of business enterprises, based on established causal link that allows you to get a comprehensive assessment to management decisions to change the parameters of governance in general and individual management subsystems aimed at ensuring the environmental and economic safety of industrial enterprise and task object (causal relationships that characterize the state of the relationship of economic activity to the environment and determine the level of environmental and economic security of industrial enterprise and object (economic activity in partial relationship with the environment that determine the level of environmental and economic security of industrial enterprises. It is possible to expand understanding of economic analysis in general and its importance in ensuring effective interaction with the enterprise environment.

  9. Method and metaphysics in Clements's and Gleason's ecological explanations.

    Science.gov (United States)

    Eliot, Christopher

    2007-03-01

    To generate explanatory theory, ecologists must wrestle with how to represent the extremely many, diverse causes behind phenomena in their domain. Early twentieth-century plant ecologists Frederic E. Clements and Henry A. Gleason provide a textbook example of different approaches to explaining vegetation, with Clements allegedly committed, despite abundant exceptions, to a law of vegetation, and Gleason denying the law in favor of less organized phenomena. However, examining Clements's approach to explanation reveals him not to be expressing a law, and instead to be developing an explanatory structure without laws, capable of progressively integrating causal complexity. Moreover, Clements and Gleason largely agree on the causes of vegetation; but, since causal understanding here underdetermines representation, they differ on how to integrate recognized causes into general theory--that is, in their methodologies. Observers of the case may have mistakenly assumed that scientific representation across the disciplines typically aims at laws like Newton's, and that representations always reveal scientists' metaphysical commitments. Ironically, in the present case, this assumption seems to have been made even by observers who regard Clements as nai ve for his alleged commitment to an ecological law.

  10. The influence of technical testing methods on perceptions of constructions

    International Nuclear Information System (INIS)

    Oestberg, Gustaf

    2002-01-01

    In principle, methods of testing the reliability and safety of constructions are designed with the aim of representing critical conditions for their use. Because of variations within technical systems, including the one for which a certain test was once developed, the validity of the method also varies. The adoption of a standardized test for different applications had to be based on the assumption that the test deals adequately with a real situation. As a consequence of this acceptance of a trustworthy relationship between test and reality, an imprint of the former on the latter occurs. This effect may even cause the perception of a reality to be defined by the corresponding test. Examples of such an influence may be found in the field of materials testing. Related phenomena can be dealt with by reference to current concepts of cognitive science and psychology of the perception of images

  11. Method for construction of normalized cDNA libraries

    Science.gov (United States)

    Soares, Marcelo B.; Efstratiadis, Argiris

    1998-01-01

    This invention provides a method to normalize a directional cDNA library constructed in a vector that allows propagation in single-stranded circle form comprising: (a) propagating the directional cDNA library in single-stranded circles; (b) generating fragments complementary to the 3' noncoding sequence of the single-stranded circles in the library to produce partial duplexes; (c) purifying the partial duplexes; (d) melting and reassociating the purified partial duplexes to appropriate Cot; and (e) purifying the unassociated single-stranded circles, thereby generating a normalized cDNA library. This invention also provides normalized cDNA libraries generated by the above-described method and uses of the generated libraries.

  12. How to Construct a Mixed Methods Research Design.

    Science.gov (United States)

    Schoonenboom, Judith; Johnson, R Burke

    2017-01-01

    This article provides researchers with knowledge of how to design a high quality mixed methods research study. To design a mixed study, researchers must understand and carefully consider each of the dimensions of mixed methods design, and always keep an eye on the issue of validity. We explain the seven major design dimensions: purpose, theoretical drive, timing (simultaneity and dependency), point of integration, typological versus interactive design approaches, planned versus emergent design, and design complexity. There also are multiple secondary dimensions that need to be considered during the design process. We explain ten secondary dimensions of design to be considered for each research study. We also provide two case studies showing how the mixed designs were constructed.

  13. Assessment of ecological and human health risks of heavy metal contamination in agriculture soils disturbed by pipeline construction.

    Science.gov (United States)

    Shi, Peng; Xiao, Jun; Wang, Yafeng; Chen, Liding

    2014-02-28

    The construction of large-scale infrastructures such as nature gas/oil pipelines involves extensive disturbance to regional ecosystems. Few studies have documented the soil degradation and heavy metal contamination caused by pipeline construction. In this study, chromium (Cr), cadmium (Cd), copper (Cu), nickel (Ni), lead (Pb) and zinc (Zn) levels were evaluated using Index of Geo-accumulation (Igeo) and Potential Ecological Risk Index (RI) values, and human health risk assessments were used to elucidate the level and spatial variation of heavy metal pollution risks. The results showed that the impact zone of pipeline installation on soil heavy metal contamination was restricted to pipeline right-of-way (RoW), which had higher Igeo of Cd, Cu, Ni and Pb than that of 20 m and 50 m. RI showed a declining tendency in different zones as follows: trench > working zone > piling area > 20 m > 50 m. Pipeline RoW resulted in higher human health risks than that of 20 m and 50 m, and children were more susceptible to non-carcinogenic hazard risk. Cluster analysis showed that Cu, Ni, Pb and Cd had similar sources, drawing attention to the anthropogenic activity. The findings in this study should help better understand the type, degree, scope and sources of heavy metal pollution from pipeline construction to reduce pollutant emissions, and are helpful in providing a scientific basis for future risk management.

  14. Assessment of Ecological and Human Health Risks of Heavy Metal Contamination in Agriculture Soils Disturbed by Pipeline Construction

    Directory of Open Access Journals (Sweden)

    Peng Shi

    2014-02-01

    Full Text Available The construction of large-scale infrastructures such as nature gas/oil pipelines involves extensive disturbance to regional ecosystems. Few studies have documented the soil degradation and heavy metal contamination caused by pipeline construction. In this study, chromium (Cr, cadmium (Cd, copper (Cu, nickel (Ni, lead (Pb and zinc (Zn levels were evaluated using Index of Geo-accumulation (Igeo and Potential Ecological Risk Index (RI values, and human health risk assessments were used to elucidate the level and spatial variation of heavy metal pollution risks. The results showed that the impact zone of pipeline installation on soil heavy metal contamination was restricted to pipeline right-of-way (RoW, which had higher Igeo of Cd, Cu, Ni and Pb than that of 20 m and 50 m. RI showed a declining tendency in different zones as follows: trench > working zone > piling area > 20 m > 50 m. Pipeline RoW resulted in higher human health risks than that of 20 m and 50 m, and children were more susceptible to non-carcinogenic hazard risk. Cluster analysis showed that Cu, Ni, Pb and Cd had similar sources, drawing attention to the anthropogenic activity. The findings in this study should help better understand the type, degree, scope and sources of heavy metal pollution from pipeline construction to reduce pollutant emissions, and are helpful in providing a scientific basis for future risk management.

  15. Ecological effects of pipeline construction through deciduous forested wetlands, Midland County, Michigan

    International Nuclear Information System (INIS)

    Zellmer, S.D.; Rastorfer, J.R.; Van Dyke, G.D.

    1991-07-01

    Implementation of recent federal and state regulations promulgated to protect wetlands makes information on effects of gas pipeline rights-of-way (ROWs) in wetlands essential to the gas pipeline industry. This study is designed to record vegetational changes induced by the construction of a large-diameter gas pipeline through deciduous forested wetlands. Two second-growth forested wetland sites mapped as Lenawee soils, one mature and one subjected to recent selective logging, were selected in Midland County, Michigan. Changes in the adjacent forest and successional development on the ROW are being documented. Cover-class estimates are being made for understory and ROW plant species using 1 x1-m quadrats. Counts are also being made for all woody species with stems < 2 cm in diameter at breast height (dbh) in the same plots used for cover-class estimates. Individual stem diameters and species counts are being recorded for all woody understory and overstory plants with stems ≥2 cm dbh in 10 x 10-m plots. Although analyses of the data have not been completed, preliminary analyses indicate that some destruction of vegetation at the ROW forest edge may have been avoidable during pipeline construction. Rapid regrowth of many native wetland plant species on the ROW occurred because remnants of native vegetation and soil-bearing propagules of existing species survived on the ROW after pipeline construction and seeding operations. 91 refs., 11 figs., 3 tabs

  16. Ecological effects of pipeline construction through deciduous forested wetlands, Midland County, Michigan

    Energy Technology Data Exchange (ETDEWEB)

    Zellmer, S.D. (Argonne National Lab., IL (United States)); Rastorfer, J.R. (Chicago State Univ., IL (United States). Dept. of Biological Sciences ANL/CSU Cooperative Herbarium, Chicago, IL (United States)); Van Dyke, G.D. (Trinity Christian Coll., Palos Heights, IL (United States). Dept. of Biology)

    1991-07-01

    Implementation of recent federal and state regulations promulgated to protect wetlands makes information on effects of gas pipeline rights-of-way (ROWs) in wetlands essential to the gas pipeline industry. This study is designed to record vegetational changes induced by the construction of a large-diameter gas pipeline through deciduous forested wetlands. Two second-growth forested wetland sites mapped as Lenawee soils, one mature and one subjected to recent selective logging, were selected in Midland County, Michigan. Changes in the adjacent forest and successional development on the ROW are being documented. Cover-class estimates are being made for understory and ROW plant species using 1 {times}1-m quadrats. Counts are also being made for all woody species with stems < 2 cm in diameter at breast height (dbh) in the same plots used for cover-class estimates. Individual stem diameters and species counts are being recorded for all woody understory and overstory plants with stems {ge}2 cm dbh in 10 {times} 10-m plots. Although analyses of the data have not been completed, preliminary analyses indicate that some destruction of vegetation at the ROW forest edge may have been avoidable during pipeline construction. Rapid regrowth of many native wetland plant species on the ROW occurred because remnants of native vegetation and soil-bearing propagules of existing species survived on the ROW after pipeline construction and seeding operations. 91 refs., 11 figs., 3 tabs.

  17. Research into Behaviour Patterns Typical for Consumers of Construction Material as the Mission of Ecological Management

    Directory of Open Access Journals (Sweden)

    Ivanova Zinaida

    2016-01-01

    Full Text Available The objective of the co-authors is to study the motivation of purchasers of construction/finishing materials and the criteria that govern their selection. No systemic studies of consumer behavioral models and stereotypes in respect of residential housing have been performed so far. However, the environmentally determined management techniques, applicable to the production of building materials and construction of residential housing, are highly relevant both worldwide and in the Russian Federation. The co-authors have developed an original research methodology, drafted a questionnaire, and conducted a pilot survey. Its findings have proven that the price and quality of construction materials are the main factors that influence the decision making process in favor of particular items. Mere 14% of the respondents chose environmental friendliness as the decision making criterion. The findings of the focus group projects have also proven the trustworthiness of the stereotypes and behavioral models identified by the co-authors. The co-authors make a conclusion that further sociological surveys are needed to implement the patterns of environmentally determined management and to influence the value paradigms of the population.

  18. An algebraic method for constructing stable and consistent autoregressive filters

    International Nuclear Information System (INIS)

    Harlim, John; Hong, Hoon; Robbins, Jacob L.

    2015-01-01

    In this paper, we introduce an algebraic method to construct stable and consistent univariate autoregressive (AR) models of low order for filtering and predicting nonlinear turbulent signals with memory depth. By stable, we refer to the classical stability condition for the AR model. By consistent, we refer to the classical consistency constraints of Adams–Bashforth methods of order-two. One attractive feature of this algebraic method is that the model parameters can be obtained without directly knowing any training data set as opposed to many standard, regression-based parameterization methods. It takes only long-time average statistics as inputs. The proposed method provides a discretization time step interval which guarantees the existence of stable and consistent AR model and simultaneously produces the parameters for the AR models. In our numerical examples with two chaotic time series with different characteristics of decaying time scales, we find that the proposed AR models produce significantly more accurate short-term predictive skill and comparable filtering skill relative to the linear regression-based AR models. These encouraging results are robust across wide ranges of discretization times, observation times, and observation noise variances. Finally, we also find that the proposed model produces an improved short-time prediction relative to the linear regression-based AR-models in forecasting a data set that characterizes the variability of the Madden–Julian Oscillation, a dominant tropical atmospheric wave pattern

  19. Study on remote sensing method for drawing up and utilizing ecological and natural map II; concentrated on drawing up a plant ecological classification map

    Energy Technology Data Exchange (ETDEWEB)

    Jeon, Seong Woo; Chung, Hwui Chul [Korea Environment Institute, Seoul (Korea)

    1999-12-01

    Following with the flows of the environmental conservation, Korea has revised the law of natural environmental conservation. In this law, it has suggested to draw up an ecological nature figure for efficient preservation and utilization of a country. To draw up an ecological nature figure, it requires several evaluating factors. Among them, a plant ecological classification is a very important evaluating factor since it can evaluate a habitation area of natural organisms. This study investigated a drawing up method of plant ecological classification using satellite image data. However the limit of satellite image data and the quality of required plant ecological classification are not quite matched but if the satellite image data and the infrared color aerial photograph are mixed, it can be expected to have an excellent quality of plant ecological classification. 85 refs., 86 figs., 45 tabs.

  20. Least square method of estimation of ecological half-lives of radionuclides in sediments

    International Nuclear Information System (INIS)

    Ranade, A.K.; Pandey, M.; Datta, D.; Ravi, P.M.

    2012-01-01

    Long term behavior of radionuclides in the environment is an important issue for estimating probable radiological consequences and associated risks. It is also useful for evaluating potential use of contaminated areas and the possible effectiveness of remediation activities. The long term behavior is quantified by means of ecological half life, a parameter that aggregates all processes except radioactive decay which causes a decrease of activity in a specific medium. The process involved in ecological half life depends upon the environmental condition of the medium involved. A fitting model based on least square regression approach was used to evaluate the ecological half life. This least square method has to run several times to evaluate the number of ecological half lives present in the medium for the radionuclide. The case study data considered here is for 137 Cs in Mumbai Harbour Bay. The study shows the trend of 137 Cs over the years at a location in Mumbai Harbour Bay. First iteration model illustrate the ecological half life as 4.94 y and subsequently it passes through a number of runs for more number of ecological half-life present by goodness of fit test. The paper presents a methodology for evaluating ecological half life and exemplifies it with a case study of 137 Cs. (author)

  1. A shifting paradigm: Teachers' beliefs and methods for fostering ecological literacy in two public charter schools

    Science.gov (United States)

    Sterling, Evan P.

    Ecological literacy is measured by a person's ability to understand the natural systems that make life on earth possible and how to live in accordance with those systems. The emergence of the pedagogies of place- and community-based education during the past two decades provides a possible avenue for fostering ecological literacy in schools. This thesis explores the following research questions: 1) How is ecological literacy fostered in two Alaskan public charter schools? 2) What are teachers' beliefs in these two schools about the way children and youth develop ecological literacy? 3) What are effective teaching methods and what are the challenges in engaging students in ecological literacy? Semi-structured interviews were conducted with six K--12 teachers in two public charter schools in Alaska in order to investigate these questions, and relevant examples of student work were collected for study as well. Qualitative data analysis revealed several emergent themes: the need for real-world connections to curriculum; the necessity of time spent outdoors at a young age; the long-term and holistic nature of ecological literacy development; and the importance of family and community role models in developing connections with the natural world. Based upon the research findings, several recommendations are made to support the efforts of teachers in these schools and elsewhere for fostering ecological literacy in children and youth.

  2. Tunnels: different construction methods and its use for pipelines installation

    Energy Technology Data Exchange (ETDEWEB)

    Mattos, Tales; Soares, Ana Cecilia; Assis, Slow de; Bolsonaro, Ralfo; Sanandres, Simon [Petroleo do Brasil S.A. (PETROBRAS), Rio de Janeiro, RJ (Brazil)

    2009-07-01

    In a continental dimensions country like Brazil, the pipeline modal faces the challenge of opening ROW's in the most different kind of soils with the most different geomorphology. To safely fulfill the pipeline construction demand, the ROW opening uses all techniques in earthworks and route definition and, where is necessary, no digging techniques like horizontal directional drilling, micro tunneling and also full size tunnels design for pipelines installation in high topography terrains to avoid geotechnical risks. PETROBRAS has already used the tunnel technique to cross higher terrains with great construction difficult, and mainly to make it pipeline maintenance and operation easier. For the GASBOL Project, in Aparados da Serra region and in GASYRG, in Bolivia, two tunnels were opened with approximately 700 meters and 2,000 meters each one. The GASBOL Project had the particularity of being a gallery with only one excavation face, finishing under the hill and from this point was drilled a vertical shaft was drilled until the top to install the pipeline section, while in GASYRG Project the tunnel had two excavation faces. Currently, two projects are under development with tunnels, one of then is the Caraguatatuba-Taubate gas pipeline (GASTAU), with a 5 km tunnel, with the same concepts of the GASBOL tunnel, with a gallery to be opened with the use of a TBM (Tunneling Boring Machine), and a shaft to the surface, and the gas pipeline Cabiunas-Reduc III (GASDUC III) project is under construction with a 3.7 km tunnel, like the GASYRG tunnel with two faces. This paper presents the main excavation tunneling methods, conventional and mechanized, presenting the most relevant characteristics from both and, in particular, the use of tunnels for pipelines installation. (author)

  3. Constructive Epistemic Modeling: A Hierarchical Bayesian Model Averaging Method

    Science.gov (United States)

    Tsai, F. T. C.; Elshall, A. S.

    2014-12-01

    Constructive epistemic modeling is the idea that our understanding of a natural system through a scientific model is a mental construct that continually develops through learning about and from the model. Using the hierarchical Bayesian model averaging (HBMA) method [1], this study shows that segregating different uncertain model components through a BMA tree of posterior model probabilities, model prediction, within-model variance, between-model variance and total model variance serves as a learning tool [2]. First, the BMA tree of posterior model probabilities permits the comparative evaluation of the candidate propositions of each uncertain model component. Second, systemic model dissection is imperative for understanding the individual contribution of each uncertain model component to the model prediction and variance. Third, the hierarchical representation of the between-model variance facilitates the prioritization of the contribution of each uncertain model component to the overall model uncertainty. We illustrate these concepts using the groundwater modeling of a siliciclastic aquifer-fault system. The sources of uncertainty considered are from geological architecture, formation dip, boundary conditions and model parameters. The study shows that the HBMA analysis helps in advancing knowledge about the model rather than forcing the model to fit a particularly understanding or merely averaging several candidate models. [1] Tsai, F. T.-C., and A. S. Elshall (2013), Hierarchical Bayesian model averaging for hydrostratigraphic modeling: Uncertainty segregation and comparative evaluation. Water Resources Research, 49, 5520-5536, doi:10.1002/wrcr.20428. [2] Elshall, A.S., and F. T.-C. Tsai (2014). Constructive epistemic modeling of groundwater flow with geological architecture and boundary condition uncertainty under Bayesian paradigm, Journal of Hydrology, 517, 105-119, doi: 10.1016/j.jhydrol.2014.05.027.

  4. Assessment of impact of construction materials on the ecological safety of home

    Directory of Open Access Journals (Sweden)

    Zhigulina Anna

    2017-01-01

    Full Text Available The article deals with the problems of creating environmentally friendly aerial environment within residential premises. The main sources causing air pollution of urban housing are determined and classified. The origins of air pollution sources of residential premises are adopted as the classifying criterion. The sources of contamination are defined and assessed. Particular attention is paid to the choice of environmentally friendly building materials. The methodology for assessing toxicity of industrial waste used in the production of housing materials is developed to assess the comfort and environmental safety of home. The idea of creating “Residential buldings ID” containing information on the construction materials used is introduced.

  5. Advanced construction methods for new nuclear power plants

    International Nuclear Information System (INIS)

    Bilbao y Leon, Sama; Cleveland, John; Moon, Seong-Gyun; Tyobeka, Bismark

    2009-01-01

    The length of the construction and commissioning phases of nuclear power plants have historically been longer than for conventional fossil fuelled plants, often having a record of delays and cost overruns as a result from several factors including legal interventions and revisions of safety regulations. Recent nuclear construction projects however, have shown that long construction periods for nuclear power plants are no longer the norm. While there are several inter-related factors that influence the construction time, the use of advanced construction techniques has contributed significantly to reducing the construction length of recent nuclear projects. (author)

  6. Limitations of a metabolic network-based reverse ecology method for inferring host-pathogen interactions.

    Science.gov (United States)

    Takemoto, Kazuhiro; Aie, Kazuki

    2017-05-25

    Host-pathogen interactions are important in a wide range of research fields. Given the importance of metabolic crosstalk between hosts and pathogens, a metabolic network-based reverse ecology method was proposed to infer these interactions. However, the validity of this method remains unclear because of the various explanations presented and the influence of potentially confounding factors that have thus far been neglected. We re-evaluated the importance of the reverse ecology method for evaluating host-pathogen interactions while statistically controlling for confounding effects using oxygen requirement, genome, metabolic network, and phylogeny data. Our data analyses showed that host-pathogen interactions were more strongly influenced by genome size, primary network parameters (e.g., number of edges), oxygen requirement, and phylogeny than the reserve ecology-based measures. These results indicate the limitations of the reverse ecology method; however, they do not discount the importance of adopting reverse ecology approaches altogether. Rather, we highlight the need for developing more suitable methods for inferring host-pathogen interactions and conducting more careful examinations of the relationships between metabolic networks and host-pathogen interactions.

  7. Industrial ecology: Quantitative methods for exploring a lower carbon future

    Science.gov (United States)

    Thomas, Valerie M.

    2015-03-01

    Quantitative methods for environmental and cost analyses of energy, industrial, and infrastructure systems are briefly introduced and surveyed, with the aim of encouraging broader utilization and development of quantitative methods in sustainable energy research. Material and energy flow analyses can provide an overall system overview. The methods of engineering economics and cost benefit analysis, such as net present values, are the most straightforward approach for evaluating investment options, with the levelized cost of energy being a widely used metric in electricity analyses. Environmental lifecycle assessment has been extensively developed, with both detailed process-based and comprehensive input-output approaches available. Optimization methods provide an opportunity to go beyond engineering economics to develop detailed least-cost or least-impact combinations of many different choices.

  8. Mathematical Methods of System Analysis in Construction Materials

    Science.gov (United States)

    Garkina, Irina; Danilov, Alexander

    2017-10-01

    System attributes of construction materials are defined: complexity of an object, integrity of set of elements, existence of essential, stable relations between elements defining integrative properties of system, existence of structure, etc. On the basis of cognitive modelling (intensive and extensive properties; the operating parameters) materials (as difficult systems) and creation of the cognitive map the hierarchical modular structure of criteria of quality is under construction. It actually is a basis for preparation of the specification on development of material (the required organization and properties). Proceeding from a modern paradigm (model of statement of problems and their decisions) of development of materials, levels and modules are specified in structure of material. It when using the principles of the system analysis allows to considered technological process as the difficult system consisting of elements of the distinguished specification level: from atomic before separate process. Each element of system depending on an effective objective is considered as separate system with more detailed levels of decomposition. Among them, semantic and qualitative analyses of an object (are considered a research objective, decomposition levels, separate elements and communications between them come to light). Further formalization of the available knowledge in the form of mathematical models (structural identification) is carried out; communications between input and output parameters (parametrical identification) are defined. Hierarchical structures of criteria of quality are under construction for each allocated level. On her the relevant hierarchical structures of system (material) are under construction. Regularities of structurization and formation of properties, generally are considered at the levels from micro to a macrostructure. The mathematical model of material is represented as set of the models corresponding to private criteria by which separate

  9. A Group Action Method for Construction of Strong Substitution Box

    Science.gov (United States)

    Jamal, Sajjad Shaukat; Shah, Tariq; Attaullah, Atta

    2017-06-01

    In this paper, the method to develop cryptographically strong substitution box is presented which can be used in multimedia security and data hiding techniques. The algorithm of construction depends on the action of a projective general linear group over the set of units of the finite commutative ring. The strength of substitution box and ability to create confusion is assessed with different available analyses. Moreover, the ability of resistance against malicious attacks is also evaluated. The substitution box is examined by bit independent criterion, strict avalanche criterion, nonlinearity test, linear approximation probability test and differential approximation probability test. This substitution box is equated with well-recognized substitution boxes such as AES, Gray, APA, S8, prime of residue, Xyi and Skipjack. The comparison shows encouraging results about the strength of the proposed box. The majority logic criterion is also calculated to analyze the strength and its practical implementation.

  10. Laparotomy operative note template constructed through a modified Delphi method.

    Science.gov (United States)

    Moore, Lolonya; Churley-Strom, Ruth; Singal, Bonita; O'Leary, Sharon

    2009-05-01

    An operative note is indispensable to physician documentation and decision-making; however, there are no accepted standards for operative note content. Our aim was to use a modified Delphi consensus-building method to construct a uniform operative note template for laparotomy. Using Joint Commission on Accreditation of Healthcare Organizations requirements, literature review, and feedback from 15 medical malpractice defense attorneys, we compiled a draft operative note template of 31 elements. We surveyed 37 Association of Professor of Gynecology and Obstetrics/Solvay scholars asking for their input on inclusion of each item as essential content of the operative note. Two iterations of the survey were required to reach a predetermined 75% level of consensus. Nine elements were eliminated from the template: 6 original and 3 expert-suggested elements. We provide an operative note template that was compiled through a Delphi process.

  11. Control Scheme of River-lake System from the View of Ecological Sponge Basin aiming at Sponge City Construction

    Science.gov (United States)

    Ding, X.; Liu, J.; Yang, Z.

    2017-12-01

    China is in the rapid advance of urbanization, and is promoting the Sponge City Construction (SCC) with the characteristics of natural accumulation, natural infiltration and natural purification. The Chinese government selected 16 and 14 cities as pilot cities in 2015 and 2016 respectively to carry out SCC taking Low Impact Development (LID) as the concept. However, in 2015 and 2016, water-logging occurred in 10 cities and 9 cities respectively during the pilot cities. Therefore, relying solely on LID can not solve the problem of urban flood and waterlogging. Except for a series of LID measures during the process of SCC, corresponding control scheme of river-lake system should be established to realize water-related targets. From the view of ecological sponge basin, this study presents the general idea of SCC both in and out of the unban built-up area and the corresponding control scheme of river-lake system: for the regions outside the built-up area, the main aim of SCC is to carry out the top-level design of urban flood control and waterlogging, establish the water security system outside the city for solving the problems including flood control, water resources, water environment and water ecology; for the built-up area, the main aim of SCC is to construct different kinds of urban sponge according to local conditions and develop multi-scale drainage system responding to different intensities of rainfall taking the river-lake system as the core. Taking Fenghuang County of Hunan Province as an example for the application research, the results indicate that, after the implementation of the control scheme of river-lake system: 1) together with other SCC measures including LID, the control rate of total annual runoff in Fenghuang County is expected to be 82.9% which meets the target requirement of 80%; 2) flood control and drainage standards in Fenghuang County can be increased from the current 10-year return to 20-year return; 3) urban and rural water supply

  12. Construction of crystal structure prototype database: methods and applications

    International Nuclear Information System (INIS)

    Su, Chuanxun; Lv, Jian; Wang, Hui; Wang, Yanchao; Ma, Yanming; Li, Quan; Zhang, Lijun

    2017-01-01

    Crystal structure prototype data have become a useful source of information for materials discovery in the fields of crystallography, chemistry, physics, and materials science. This work reports the development of a robust and efficient method for assessing the similarity of structures on the basis of their interatomic distances. Using this method, we proposed a simple and unambiguous definition of crystal structure prototype based on hierarchical clustering theory, and constructed the crystal structure prototype database (CSPD) by filtering the known crystallographic structures in a database. With similar method, a program structure prototype analysis package (SPAP) was developed to remove similar structures in CALYPSO prediction results and extract predicted low energy structures for a separate theoretical structure database. A series of statistics describing the distribution of crystal structure prototypes in the CSPD was compiled to provide an important insight for structure prediction and high-throughput calculations. Illustrative examples of the application of the proposed database are given, including the generation of initial structures for structure prediction and determination of the prototype structure in databases. These examples demonstrate the CSPD to be a generally applicable and useful tool for materials discovery. (paper)

  13. Construction of crystal structure prototype database: methods and applications.

    Science.gov (United States)

    Su, Chuanxun; Lv, Jian; Li, Quan; Wang, Hui; Zhang, Lijun; Wang, Yanchao; Ma, Yanming

    2017-04-26

    Crystal structure prototype data have become a useful source of information for materials discovery in the fields of crystallography, chemistry, physics, and materials science. This work reports the development of a robust and efficient method for assessing the similarity of structures on the basis of their interatomic distances. Using this method, we proposed a simple and unambiguous definition of crystal structure prototype based on hierarchical clustering theory, and constructed the crystal structure prototype database (CSPD) by filtering the known crystallographic structures in a database. With similar method, a program structure prototype analysis package (SPAP) was developed to remove similar structures in CALYPSO prediction results and extract predicted low energy structures for a separate theoretical structure database. A series of statistics describing the distribution of crystal structure prototypes in the CSPD was compiled to provide an important insight for structure prediction and high-throughput calculations. Illustrative examples of the application of the proposed database are given, including the generation of initial structures for structure prediction and determination of the prototype structure in databases. These examples demonstrate the CSPD to be a generally applicable and useful tool for materials discovery.

  14. A Systematic Method to Analyze Force Majeure in Construction Claims

    Directory of Open Access Journals (Sweden)

    Saud Alshammari

    2017-12-01

    Full Text Available In construction delay claims, force majeure is normally recognized as an excusable risk that entitles contractors only to time extensions, but neither of the contracting parties is entitled to monetary compensation to recover delay damages. However, there are instances where contractors are entitled to both time and cost compensations, as evidenced by some court cases relating to force majeure claims. Such instances involve attributing the occurrence of the force majeure to the effect of other prior delay events that pushed project performance into the period of the force majeure. Existing delay analysis methods are not capable of addressing this issue, as none take the impact of other delays into consideration when analyzing force majeure claims. Stimulated by this gap, this study proposes an improved and sound method for fairly analyzing the responsibility of force majeure delay claims amongst contracting parties. This method was implemented on a case project to help demonstrate its application and also ascertain its practicability. The contribution of this paper is twofold. First, it has highlighted the situation of force majeure delay that can be compensable, creating more awareness among researchers and industry practitioners. The second is a proposed systematic process to appropriately analyze its responsibility, which equitably addresses claims from such delays with little or no chance of dispute ensuing.

  15. A Comparison of Affect Ratings Obtained with Ecological Momentary Assessment and the Day Reconstruction Method

    Science.gov (United States)

    Dockray, Samantha; Grant, Nina; Stone, Arthur A.; Kahneman, Daniel; Wardle, Jane; Steptoe, Andrew

    2010-01-01

    Measurement of affective states in everyday life is of fundamental importance in many types of quality of life, health, and psychological research. Ecological momentary assessment (EMA) is the recognized method of choice, but the respondent burden can be high. The day reconstruction method (DRM) was developed by Kahneman and colleagues ("Science,"…

  16. A new method for analysing socio-ecological patterns of vulnerability

    NARCIS (Netherlands)

    Kok, M.; Lüdeke, M.; Lucas, P.; Sterzel, T.; Walther, C.; Janssen, P.; Sietz, D.; Soysa, de I.

    2016-01-01

    This paper presents a method for the analysis of socio-ecological patterns of vulnerability of people being at risk of losing their livelihoods as a consequence of global environmental change. This method fills a gap in methodologies for vulnerability analysis by providing generalizations of the

  17. METHOD OF IMPROVING ENERGY, ECOLOGICAL AND STENGTH CHARACTERISTICS OF THE VEHICLE DIESEL ENGINE

    Directory of Open Access Journals (Sweden)

    F. Abramchuk

    2016-06-01

    Full Text Available The article deals with a complex method of deterioration of economic, ecological, and strength indicators of 16ЧН26/27 transport diesel engine. According to the offered method, there were considered conjugated problems applicable to the transport diesel engine combustion chamber and cooling cavities of the cylinder head. Based on the complex research conducted.

  18. Biological/ecological investigations parallel to wind power plant construction and operation. Final report. Biologisch-oekologische Begleituntersuchungen zum Bau und Betrieb von Windkraftanlagen. Endbericht

    Energy Technology Data Exchange (ETDEWEB)

    Boettger, M; Clemens, T; Grote, G; Hartmann, G; Hartwig, E; Lammen, C; Vauk-Hentzelt, E

    1990-01-01

    In view of the fact that there is no validated knowledge in Germany on the environmental effects of wind power plant construction and operation, the Norddeutsche Naturschutzakademie was asked by the BMFT to carry out a study in this field. The following problems were investigated: General ecological assessment and ornithological assessment of sites; investigations parallel to plant construction and operation, ecological effects; long-term effects; proposal of landscape conservation measures in regions with wind power plants. The report presents the results of the investigation. (BWI).

  19. Macroinvertebrate assemblages and biodiversity levels: ecological role of constructed wetlands and artificial ponds in a natural park

    Directory of Open Access Journals (Sweden)

    Laura Sartori

    2014-02-01

    Full Text Available Normal 0 14 false false false MicrosoftInternetExplorer4 Constructed wetlands play an important role in water supply, floodwater retention and nutrient removal, at the same time allowing the restoration of lost habitat and the preservation of biodiversity. There is little knowledge about the biodiversity that can be found in these artificial environments along time, especially at the invertebrate community level. Macroinvertebrate assemblages, water chemistry, morphology, and environmental characteristics of natural ponds, artificial pools and constructed wetlands in Parco Pineta (Northern Italy were studied to evaluate the effects of local factors on macroinvertebrate communities. The objective was to verify if each ecosystem could equally contribute to local biodiversity, regardless of its natural or artificial origin. Principal Components Analysis showed that ponds were divided into clusters, based on their morphology and their water quality, independently from their origin. The composition of macroinvertebrate communities was similar among natural wetlands and ponds artificially created to provide new habitats in the park, while it was different among natural wetlands and constructed wetlands created for wastewater treatment purposes. Biodiversity of natural ponds and constructed wetlands, evaluated using taxa richness, Shannon index, and Pielou index, was comparable. Canonical Correspondence Analysis highlighted differences in macroinvertebrate community composition and pointed out the relationships among macroinvertebrates and various environmental variables: habitat heterogeneity resulted as the most relevant factor that influences taxa richness. Water quality also affects the macroinvertebrate community structure. We determined that constructed wetlands with higher pollutant concentrations show different assemblage compositions but comparable overall macroinvertebrate biodiversity. Constructed wetlands became valuable ecological elements

  20. Chemical Footprint Method for Improved Communication of Freshwater Ecotoxicity Impacts in the Context of Ecological Limits

    DEFF Research Database (Denmark)

    Bjørn, Anders; Diamond, Miriam; Birkved, Morten

    2014-01-01

    The ecological footprint method has been successful in communicating environmental impacts of anthropogenic activities in the context of ecological limits. We introduce a chemical footprint method that expresses ecotoxicity impacts from anthropogenic chemical emissions as the dilution needed...... to avoid freshwater ecosystem damage. The indicator is based on USEtox characterization factors with a modified toxicity reference point. Chemical footprint results can be compared to the actual dilution capacity within the geographic vicinity receiving the emissions to estimate whether its ecological...... limit has been exceeded and hence whether emissions can be expected to be environmentally sustainable. The footprint method was illustrated using two case studies. The first was all inventoried emissions from European countries and selected metropolitan areas in 2004, which indicated that the dilution...

  1. Software Tool Implementing the Fuzzy AHP Method in Ecological Risk Assessment

    Directory of Open Access Journals (Sweden)

    Radionovs Andrejs

    2017-12-01

    Full Text Available Due to the increased spread of invasive animals and plants in the territory of Latvia, the necessity of ecological risk assessment related to such kind of spread has grown lately. In cases with sufficient statistical data, the risk assessment may be successfully performed on the basis of statistical methods. The amount of statistical data in the context of spread of invasive animals and plants is pretty poor; therefore, the only method of ecological risk assessment remains subjective judgements of experts. The present paper proposes using a programming tool for ecological risk analysis elaborated by the authors. With the help of this programming tool the method of Fuzzy Analytical Hierarchical Process is implemented. The elements of the pairwise comparison matrix are allowed to be expressed by triangular and trapezoidal fuzzy sets. The presented tool makes it possible to design the fuzzy pair-wise comparison matrix and process the results in a user-friendly way.

  2. [Application of ordinary Kriging method in entomologic ecology].

    Science.gov (United States)

    Zhang, Runjie; Zhou, Qiang; Chen, Cuixian; Wang, Shousong

    2003-01-01

    Geostatistics is a statistic method based on regional variables and using the tool of variogram to analyze the spatial structure and the patterns of organism. In simulating the variogram within a great range, though optimal simulation cannot be obtained, the simulation method of a dialogue between human and computer can be used to optimize the parameters of the spherical models. In this paper, the method mentioned above and the weighted polynomial regression were utilized to simulate the one-step spherical model, the two-step spherical model and linear function model, and the available nearby samples were used to draw on the ordinary Kriging procedure, which provided a best linear unbiased estimate of the constraint of the unbiased estimation. The sum of square deviation between the estimating and measuring values of varying theory models were figured out, and the relative graphs were shown. It was showed that the simulation based on the two-step spherical model was the best simulation, and the one-step spherical model was better than the linear function model.

  3. Introducing a Method for Social-ecological Assessment of Small Urban Parks

    Directory of Open Access Journals (Sweden)

    Zanariah Jasman

    2016-06-01

    Full Text Available Small parks in cities are important to support overall urban biodiversity and ecological network. The aim of this paper is to introduce a method of identifying and assessing the ecological characteristics and anthropogenic factors of small urban parks. We developed a framework that combined structured observation and field measurement. The method suggests an integrative assessment that is practical and understandable to the park planners and managers to enhance small parks to support overall urban biodiversity and ecosystem services. High biodiversity can provide opportunities for humans to experience nature and wildlife in cities, thus contributing to the quality of life of urban dwellers.

  4. Construction of the Cylindrical Ozone Generator by Silent Discharge Method

    International Nuclear Information System (INIS)

    Agus Purwadi; Widdi Usada; Suryadi; Isyuniarto; Sri Sukmajaya

    2002-01-01

    It has been constructed the ozone generator by silent discharge method. Anode and cathode of discharge tube were made of stainless steel (SS) in the cylinder form with diameters of 22 mm and 25 mm, the length of 100 mm and 110 mm, the equal thickness of 1 mm respectively. The dielectric was made of cylinder glass with diameter of 23 cm, the length of 105 cm and the thickness of 1 mm. The testing of apparatus was carried out by using discharge voltage of 12.5 kV and frequency of 1.5 kHz. Identification of the ozone gas formation was marked by the existing of special ozone smell and the separated of iodine molecule (yellow colour) from the potassium iodide solution which contaminated gas out put from the ozonizer. By using absorbing method can be shown that the ozone production rate was 0.196 mg/s by using oxygen gas input and 0.065 mg/s by using ordinary air input. (author)

  5. Range bagging: a new method for ecological niche modelling from presence-only data.

    Science.gov (United States)

    Drake, John M

    2015-06-06

    The ecological niche is the set of environments in which a population of a species can persist without introduction of individuals from other locations. A good mathematical or computational representation of the niche is a prerequisite to addressing many questions in ecology, biogeography, evolutionary biology and conservation. A particularly challenging question for ecological niche modelling is the problem of presence-only modelling. That is, can an ecological niche be identified from records drawn only from the set of niche environments without records from non-niche environments for comparison? Here, I introduce a new method for ecological niche modelling from presence-only data called range bagging. Range bagging draws on the concept of a species' environmental range, but was inspired by the empirical performance of ensemble learning algorithms in other areas of ecological research. This paper extends the concept of environmental range to multiple dimensions and shows that range bagging is computationally feasible even when the number of environmental dimensions is large. The target of the range bagging base learner is an environmental tolerance of the species in a projection of its niche and is therefore an ecologically interpretable property of a species' biological requirements. The computational complexity of range bagging is linear in the number of examples, which compares favourably with the main alternative, Qhull. In conclusion, range bagging appears to be a reasonable choice for niche modelling in applications in which a presence-only method is desired and may provide a solution to problems in other disciplines where one-class classification is required, such as outlier detection and concept learning.

  6. [Ecological risk assessment of hydropower dam construction on aquatic species in middle reaches of Lancang River, Southwest China based on ESHIPPO model].

    Science.gov (United States)

    Li, Xiao-Yan; Peng, Ming-Chun; Dong, Shi-Kui; Liu, Shi-Liang; Li, Jin-Peng; Yang, Zhi-Feng

    2013-02-01

    An investigation was conducted on the phytoplankton, zooplankton, and fish at 8 sampling sections in the Manwan Reservoir before and after the construction of Xiaowan Hydropower Dam. The modified ESHIPPO model was applied to study the changes of the featured aquatic species, including endangered species, endemic specie, peis resource species, and native fish, aimed to make an ecological risk assessment of the dam construction on the aquatic species. The dam construction had definite ecological risk on the aquatic species, especially the endemic fish, in Langcang River, due to the changes of hydrological conditions. The endemic species including Bangia atropurpurea, Lemanea sinica, Prasiola sp., Attheyella yunnanensis, and Neutrodiaptomus mariadvigae were at high ecological risk, and thus, besides monitoring, protection measures were needed to be taken to lower the possibility of the species extinction. The widely distributed species of phytoplankton and zooplankton were at medium ecological risk, and protection measures besides monitoring should be prepared. Twelve kinds of native fish, including Barbodes huangchuchieni, Sinilabeo laticeps, Racoma lantsangensis, Racoma lissolabiatus, Paracobitis anguillioides, Schistura latifasciata, Botia nigrolineata, Vanmanenia striata, Homaloptera yunnanensis, Platytropius longianlis, Glyptothorax zanaensis, and Pseudecheneis immaculate, were at high ecological risk, and protection measures needed to be developed to prevent the possibility of the species loss and extinction.

  7. A Conceptual Grey Analysis Method for Construction Projects

    Directory of Open Access Journals (Sweden)

    Maria Mikela Chatzimichailidou

    2015-05-01

    Full Text Available Concerning engineers, project management is a crucial field of research and development. Projects of high uncertainty and scale are characterized by risk, primarily related to their completion time. Thus, safe duration estimations, throughout the planning of a project, are a key objective for project managers. However, traditional linear approaches fail to include and sufficiently serve the dynamic nature of activities duration. On this ground, attention should be paid to designing and implementing methodologies that approximate the duration of the activities during the phase of planning and scheduling too. The grey analysis mathematical modeling seems to gain grounds, since it gradually becomes a well-adapted and up-to-date technique for numerous scientific sectors. This paper examines the contribution of the logic behind the aforementioned analysis, aiming to predict possible future divergences of task durations in big construction projects. Based on time observations of critical instances, a conceptual method is developed for making duration estimations and communicating deviations from the original schedule, in a way that approximations will fit reality better. The whole procedure endeavors to investigate the decrease of uncertainty, regarding project completion time and reduce, up to a scale, a possible inaccurate estimation of a project manager. The utmost effort is about exploiting the gained experience and eliminating the “hedgehog syndrome”. This is attainable by designing a reliable, easily updated, and readable information system. An enlightening example is to be found in the last section.

  8. Method to Increase the Coupling Force in a Construction Machine

    Directory of Open Access Journals (Sweden)

    Tsipurskij Il’ja

    2017-01-01

    Full Text Available This paper discusses a possible method to increase the coupling tractive force track-wheel locomotion of construction machines. Sufficient tractive coupling force allows organizing translational displacement of the machine under above-medium load modes during operation of overburden chain excavators, tower cranes and gantry cranes in outdoors environments. A mechanism is examined to convert rotary motion into rectilinear motion using the example of a gear and rail, with kinematic calculations quoted. Analysis of the “force couple” system is proposed to identify free traction forces. Factors are established that influence the machine’s working movements. Equations to calculate tractive forces in track-wheel locomotion are described. A laboratory complex is presented where students of mechanical engineering gain practical skills in mastering the production process of soil excavation and the influence of the coupling tractive force during the machine’s operation. As practical recommendation, the paper describes a device made of a balancing lever, drive cogwheel and tractive chain to implement the required tractive force of the trolley in coupling; this solution’s efficiency is demonstrated for experimental works on hard soils with high coefficient of difficulty.

  9. 46 CFR 50.20-30 - Alternative materials or methods of construction.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Alternative materials or methods of construction. 50.20... ENGINEERING GENERAL PROVISIONS Plan Submittal and Approval § 50.20-30 Alternative materials or methods of construction. (a) When new or alternative procedures, designs, or methods of construction are submitted for...

  10. [System construction of early warning for ecological security at cultural and natural heritage mixed sites and its application: a case study of Wuyishan Scenery District].

    Science.gov (United States)

    You, Wei-Bin; He, Dong-Jin; Qin, De-Hua; Ji, Zhi-Rong; Wu, Li-Yun; Yu, Jian-An; Chen, Bing-Rong; Tan, Yong

    2014-05-01

    This paper proposed a new concept of ecological security for protection by a comprehensive analysis of the contents and standards of world heritage sites. A frame concept model named "Pressure-State-Control" for early warning of ecological security at world heritage mixed sites was constructed and evaluation indicators of this frame were also selected. Wuyishan Scenery District was chosen for a case study, which has been severely disturbed by natural and artificial factors. Based on the frame model of "Pressure-State-Control" and by employing extension analysis, the matter-element model was established to assess the ecological security status of this cultural and natural world heritage mixed site. The results showed that the accuracy of ecological security early warning reached 84%. Early warning rank was I level (no alert status) in 1997 and 2009, but that in 2009 had a higher possibility to convert into II level. Likewise, the early-warning indices of sensitive ranks were different between 1997 and 2009. Population density, population growth rate, area index for tea garden, cultivated land owned per capita, level of drought, and investment for ecological and environmental construction were the main limiting factors to hinder the development of ecological security from 2009 to future. In general, the status of Wuyishan Scenery District ecological security was relatively good and considered as no alert level, while risk conditions also existed in terms of a few early-warning indicators. We still need to pay more attention to serious alert indicators and adopt effective prevention and control measures to maintain a good ecological security status of this heritage site.

  11. How scientific visions matter: insights from three long-term socio-ecological research (LTSER) platforms under construction in Europe

    NARCIS (Netherlands)

    Mauz, I.; Peltola, T.; Granjou, C.; Bommel, van S.; Buijs, A.E.

    2012-01-01

    Long-Term Socio-Ecological Research (LTSER) has been introduced to change the current approach to ecology and turn it into a big science. LTSER Platforms are currently being created across Europe. They are expected to enhance ecology's capacity to produce useful knowledge for facing global

  12. The Futures Wheel: A method for exploring the implications of social-ecological change

    Science.gov (United States)

    D.N. Bengston

    2015-01-01

    Change in social-ecological systems often produces a cascade of unanticipated consequences. Natural resource professionals and other stakeholders need to understand the possible implications of cascading change to prepare for it. The Futures Wheel is a "smart group" method that uses a structured brainstorming process to uncover and evaluate multiple levels of...

  13. Spatially based methods to assess the ecological status of riverine fish assemblages in European ecoregions

    NARCIS (Netherlands)

    Schmutz, S.; Beier, U.; Bohmer, J.; Leeuw, de J.J.

    2007-01-01

    The objective was to develop spatially based (type-specific) methods to assess the ecological status of European rivers according to the EU Water Framework Directive. Some 15 000 samples from about 8000 sites were pre-classified within a five-tiered classification system based on hydromorphological

  14. Harnessing the power of big data: infusing the scientific method with machine learning to transform ecology

    Science.gov (United States)

    Most efforts to harness the power of big data for ecology and environmental sciences focus on data and metadata sharing, standardization, and accuracy. However, many scientists have not accepted the data deluge as an integral part of their research because the current scientific method is not scalab...

  15. METHODOLOGICAL SUPPORT OF ECOLOGICAL SAFETY OF CONSTRUCTION WORKS IN URBAN LANDS EXPOSED TO LANDSLIDES

    Directory of Open Access Journals (Sweden)

    Koposov Evgeniy Vasilevich

    2012-10-01

    Full Text Available The article presents the findings of the research performed within the framework of Analytical Agency-Level Target-Oriented Programme entitled Development of the Research Potential of Higher School in 2009-2011, Action 2. Project 2.1.2/9589 is entitled Development of Scientific Foundations and Technologies of Protection of Urban Territories from Natural and Anthropogenic Disasters and Negative Impacts. Nizhny Novgorod was selected as the object of research. Manifested dangerous geological processes underway in the city are analyzed in the long-term run. The article demonstrates that the worst hazard comes from the landslides that can destroy the life sustenance system of the city, including its water supply, central heating and other systems. Assessment of efficiency of existing landslide prevention measures is also provided. Dependence of landslide phenomena on the cycles of the solar activity is proven. The landslide development pattern for the coming years is simulated through the employment of the fractal analysis method.

  16. Tank Operations Contract Construction Management Methodology. Utilizing The Agency Method Of Construction Management To Safely And Effectively Complete Nuclear Construction Work

    International Nuclear Information System (INIS)

    Leso, K.F.; Hamilton, H.M.; Farner, M.; Heath, T.

    2010-01-01

    Washington River Protection Solutions, LLC (WRPS) has faced significant project management challenges in managing Davis-Bacon construction work that meets contractually required small business goals. The unique challenge is to provide contracting opportunities to multiple small business construction subcontractors while performing high hazard work in a safe and productive manner. Previous to the Washington River Protection Solutions, LLC contract, Construction work at the Hanford Tank Farms was contracted to large companies, while current Department of Energy (DOE) Contracts typically emphasize small business awards. As an integral part of Nuclear Project Management at Hanford Tank Farms, construction involves removal of old equipment and structures and installation of new infrastructure to support waste retrieval and waste feed delivery to the Waste Treatment Plant. Utilizing the optimum construction approach ensures that the contractors responsible for this work are successful in meeting safety, quality, cost and schedule objectives while working in a very hazardous environment. This paper describes the successful transition from a traditional project delivery method that utilized a large business general contractor and subcontractors to a new project construction management model that is more oriented to small businesses. Construction has selected the Agency Construction Management Method. This method was implemented in the first quarter of Fiscal Year (FY) 2009, where Construction Management is performed by substantially home office resources from the URS Northwest Office in Richland, Washington. The Agency Method has allowed WRPS to provide proven Construction Managers and Field Leads to mentor and direct small business contractors, thus providing expertise and assurance of a successful project. Construction execution contracts are subcontracted directly by WRPS to small or disadvantaged contractors that are mentored and supported by DRS personnel. Each small

  17. TANK OPERATIONS CONTRACT CONSTRUCTION MANAGEMENT METHODOLOGY UTILIZING THE AGENCY METHOD OF CONSTRUCTION MANAGEMENT TO SAFELY AND EFFECTIVELY COMPLETE NUCLEAR CONSTRUCTION WORK

    Energy Technology Data Exchange (ETDEWEB)

    LESO KF; HAMILTON HM; FARNER M; HEATH T

    2010-01-14

    Washington River Protection Solutions, LLC (WRPS) has faced significant project management challenges in managing Davis-Bacon construction work that meets contractually required small business goals. The unique challenge is to provide contracting opportunities to multiple small business construction subcontractors while performing high hazard work in a safe and productive manner. Previous to the Washington River Protection Solutions, LLC contract, Construction work at the Hanford Tank Farms was contracted to large companies, while current Department of Energy (DOE) Contracts typically emphasize small business awards. As an integral part of Nuclear Project Management at Hanford Tank Farms, construction involves removal of old equipment and structures and installation of new infrastructure to support waste retrieval and waste feed delivery to the Waste Treatment Plant. Utilizing the optimum construction approach ensures that the contractors responsible for this work are successful in meeting safety, quality, cost and schedule objectives while working in a very hazardous environment. This paper describes the successful transition from a traditional project delivery method that utilized a large business general contractor and subcontractors to a new project construction management model that is more oriented to small businesses. Construction has selected the Agency Construction Management Method. This method was implemented in the first quarter of Fiscal Year (FY) 2009, where Construction Management is performed by substantially home office resources from the URS Northwest Office in Richland, Washington. The Agency Method has allowed WRPS to provide proven Construction Managers and Field Leads to mentor and direct small business contractors, thus providing expertise and assurance of a successful project. Construction execution contracts are subcontracted directly by WRPS to small or disadvantaged contractors that are mentored and supported by DRS personnel. Each small

  18. Ecological Equivalence Assessment Methods: What Trade-Offs between Operationality, Scientific Basis and Comprehensiveness?

    Science.gov (United States)

    Bezombes, Lucie; Gaucherand, Stéphanie; Kerbiriou, Christian; Reinert, Marie-Eve; Spiegelberger, Thomas

    2017-08-01

    In many countries, biodiversity compensation is required to counterbalance negative impacts of development projects on biodiversity by carrying out ecological measures, called offset when the goal is to reach "no net loss" of biodiversity. One main issue is to ensure that offset gains are equivalent to impact-related losses. Ecological equivalence is assessed with ecological equivalence assessment methods taking into account a range of key considerations that we summarized as ecological, spatial, temporal, and uncertainty. When equivalence assessment methods take into account all considerations, we call them "comprehensive". Equivalence assessment methods should also aim to be science-based and operational, which is challenging. Many equivalence assessment methods have been developed worldwide but none is fully satisfying. In the present study, we examine 13 equivalence assessment methods in order to identify (i) their general structure and (ii) the synergies and trade-offs between equivalence assessment methods characteristics related to operationality, scientific-basis and comprehensiveness (called "challenges" in his paper). We evaluate each equivalence assessment methods on the basis of 12 criteria describing the level of achievement of each challenge. We observe that all equivalence assessment methods share a general structure, with possible improvements in the choice of target biodiversity, the indicators used, the integration of landscape context and the multipliers reflecting time lags and uncertainties. We show that no equivalence assessment methods combines all challenges perfectly. There are trade-offs between and within the challenges: operationality tends to be favored while scientific basis are integrated heterogeneously in equivalence assessment methods development. One way of improving the challenges combination would be the use of offset dedicated data-bases providing scientific feedbacks on previous offset measures.

  19. Ecological effects of pipeline construction through deciduous forested wetlands, Midland County, Michigan. Topical report, October 1990--August 1992

    Energy Technology Data Exchange (ETDEWEB)

    Rastorfer, J.R. [Chicago State Univ., IL (United States). Dept. of Biological Sciences; Van Dyke, G.D.; Zellmer, S.D.; Wilkey, P.L. [Argonne National Lab., IL (United States)

    1995-04-01

    This study is designed to record vegetational changes induced by the construction of a large-diameter gas pipeline through deciduous forested wetlands. Two second-growth wetland sites mapped Lenawee soils were selected in Midland County, Michigan: Site 1, a younger stand subjected to recent selective logging, and Site 2, a more mature stand. The collection of ecological data to analyze plant succession on the right-of-way (ROW) and the effects of the developing ROW plant communities on adjacent forest communities was initiated in 1989. Cover class estimates were made for understory and ROW plant species on the basis of 1 {times} 1{minus}m quadrats. Individual stem diameters and species counts were recorded for overstory plants in 10{minus}m quadrats. Although long-term studies have not been completed, firm baseline data were established for comparative analyses with future sampling. Current data indicate that vegetation became well-established on the ROW within one year and subsequently increased in coverage. About 65% of the species were wetland indicators, and the dominants included seeded and natural invading species; nevertheless, some elements of the original flora regenerated and persist. The plants of the ecotone understories of both sites changed from their original composition as a result of the installation of the gas pipeline. Although some forest species persist at both sites, the ecotone of Site I was influenced more by the seeded species, whereas the natural invaders were more important at Site 2.

  20. Ecological studies related to the construction of the Defense Waste Processing Facility on the Savannah River Site. Annual report, FY-1994 and FY-1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-01

    The Savannah River Ecology Laboratory initiated ecological studies related to the construction of the DWPF on the SRS in FY-1979. Two areas have been used for biological surveys and long-term monitoring: the DWPF construction site (S-Area and Z-Area), and two control sites (Rainbow Bay and Tinker Creek). The Rainbow Bay study area and S-Area are located within 5 km of each other on the SRS, and both once contained Carolina bays which were very similar ecologically. One goal of the SREL`s faunal studies is to compare the natural variation in amphibian populations at the Rainbow Bay control site to the variation observed at the human-altered site (Sun Bay, formerly on the DWPF construction site). Pre-construction biological surveys included data on vegetation, birds, mammals, amphibians, reptiles, fish and several invertebrate groups. No species on the Federal Endangered or Threatened lists were found on either site, but several plants and animals of threatened or special-concern status in South Carolina were present and the gopher frog (Rana areolata) currently is being considered for federal listing. Continuing studies are directed towards assessing construction impacts on the biota and towares modeling the effects of alteration of wetland hydroperiod on the biota. Primary emphasis is being paced on evaluation the effectiveness of mitigation measures undertaken by DOE.

  1. Feasibility analysis of EDXRF method to detect heavy metal pollution in ecological environment

    Science.gov (United States)

    Hao, Zhixu; Qin, Xulei

    2018-02-01

    The change of heavy metal content in water environment, soil and plant can reflect the change of heavy metal pollution in ecological environment, and it is important to monitor the trend of heavy metal pollution in eco-environment by using water environment, soil and heavy metal content in plant. However, the content of heavy metals in nature is very low, the background elements of water environment, soil and plant samples are complex, and there are many interfering factors in the EDXRF system that will affect the spectral analysis results and reduce the detection accuracy. Through the contrastive analysis of several heavy metal elements detection methods, it is concluded that the EDXRF method is superior to other chemical methods in testing accuracy and method feasibility when the heavy metal pollution in soil is tested in ecological environment.

  2. A generic method for improving the spatial interoperability of medical and ecological databases.

    Science.gov (United States)

    Ghenassia, A; Beuscart, J B; Ficheur, G; Occelli, F; Babykina, E; Chazard, E; Genin, M

    2017-10-03

    The availability of big data in healthcare and the intensive development of data reuse and georeferencing have opened up perspectives for health spatial analysis. However, fine-scale spatial studies of ecological and medical databases are limited by the change of support problem and thus a lack of spatial unit interoperability. The use of spatial disaggregation methods to solve this problem introduces errors into the spatial estimations. Here, we present a generic, two-step method for merging medical and ecological databases that avoids the use of spatial disaggregation methods, while maximizing the spatial resolution. Firstly, a mapping table is created after one or more transition matrices have been defined. The latter link the spatial units of the original databases to the spatial units of the final database. Secondly, the mapping table is validated by (1) comparing the covariates contained in the two original databases, and (2) checking the spatial validity with a spatial continuity criterion and a spatial resolution index. We used our novel method to merge a medical database (the French national diagnosis-related group database, containing 5644 spatial units) with an ecological database (produced by the French National Institute of Statistics and Economic Studies, and containing with 36,594 spatial units). The mapping table yielded 5632 final spatial units. The mapping table's validity was evaluated by comparing the number of births in the medical database and the ecological databases in each final spatial unit. The median [interquartile range] relative difference was 2.3% [0; 5.7]. The spatial continuity criterion was low (2.4%), and the spatial resolution index was greater than for most French administrative areas. Our innovative approach improves interoperability between medical and ecological databases and facilitates fine-scale spatial analyses. We have shown that disaggregation models and large aggregation techniques are not necessarily the best ways to

  3. Principles and methods of ecological information science in the solution of ecological problems of the nuclear power industry

    International Nuclear Information System (INIS)

    Vorob'ev, E.I.; Kokoreva, L.V.; Reznichenko, V.Y.

    1989-01-01

    The accident at Chernobyl' Atomic Power Plant has drawn attention to the ecological aspects of the development of the nuclear power industry. It has become clear that the stage of discussions of the importance of ecological problems and of the advisability of studying them further has passed. We now face the stage of carrying out specific tasks: the creation of regional and global monitoring systems; the collection and analysis of data on the effect of nuclear power on nature and humans; modeling and optimization of the strategy for developing the power industry with consideration for ecological aspects; ecological factoring in scientific and technical decisions related to atomic power plant design and siting; and so forth. Three main areas of application of ecological information science can be identified in the nuclear power industry: the creation of global data banks on the safety and reliability of enterprises involved in the nuclear fuel cycle; the development of standard tools for processing and analysis of ecological data; and the creation of tools to support decisions in the field of ecology. The authors' experience in working with information systems and various groups of untrained users (biologists, medical workers, ecologists, etc.) makes possible the conclusion that the most important requirement is a convenient interface that does not require a great deal of effort to master. In the systems discussed here, the authors used structured query languages and menus

  4. A method for under-sampled ecological network data analysis: plant-pollination as case study

    Directory of Open Access Journals (Sweden)

    Peter B. Sorensen

    2012-01-01

    Full Text Available In this paper, we develop a method, termed the Interaction Distribution (ID method, for analysis of quantitative ecological network data. In many cases, quantitative network data sets are under-sampled, i.e. many interactions are poorly sampled or remain unobserved. Hence, the output of statistical analyses may fail to differentiate between patterns that are statistical artefacts and those which are real characteristics of ecological networks. The ID method can support assessment and inference of under-sampled ecological network data. In the current paper, we illustrate and discuss the ID method based on the properties of plant-animal pollination data sets of flower visitation frequencies. However, the ID method may be applied to other types of ecological networks. The method can supplement existing network analyses based on two definitions of the underlying probabilities for each combination of pollinator and plant species: (1, pi,j: the probability for a visit made by the i’th pollinator species to take place on the j’th plant species; (2, qi,j: the probability for a visit received by the j’th plant species to be made by the i’th pollinator. The method applies the Dirichlet distribution to estimate these two probabilities, based on a given empirical data set. The estimated mean values for pi,j and qi,j reflect the relative differences between recorded numbers of visits for different pollinator and plant species, and the estimated uncertainty of pi,j and qi,j decreases with higher numbers of recorded visits.

  5. Risk Evaluation on UHV Power Transmission Construction Project Based on AHP and FCE Method

    OpenAIRE

    Huiru Zhao; Sen Guo

    2014-01-01

    Ultra high voltage (UHV) power transmission construction project is a high-tech power grid construction project which faces many risks and uncertainty. Identifying the risk of UHV power transmission construction project can help mitigate the risk loss and promote the smooth construction. The risk evaluation on “Zhejiang-Fuzhou” UHV power transmission construction project was performed based on analytic hierarchy process (AHP) and fuzzy comprehensive evaluation (FCE) method in this paper. Afte...

  6. Strategies, methods and tools for managing nanorisks in construction

    Science.gov (United States)

    López de Ipiña, J. M.; Vaquero, C.; Boutry, D.; Damlencourt, J. F.; Neofytou, P.; Pilou, M.; Jankowska, E.; Larraza, I.; Pina, R.; Fernández, S.; Contreras, S.; Romero, A.; Calderon, M.; Swiezewsk, P.; Otkallo, K.; Pintea, A.; Salazar, C.; Oroz, T.; Hargreaves, B.; Ciobanu, R.; Tabrea, A.; Hazebrouck, B.; Salvi, O.; Stockmann-Juvala, H.; Vaananen, V.; Pui, D. H. Y.; Thompson, Drew

    2015-05-01

    This paper presents a general overview of the work carried out by European project SCAFFOLD (GA 280535) during its 30 months of life, with special emphasis on risk management component. The research conducted by SCAFFOLD is focused on the European construction sector and considers 5 types of nanomaterials (TiO2, SiO2, carbon nanofibres, cellulose nanofibers and nanoclays), 6 construction applications (Depollutant mortars, selfcompacting concretes, coatings, self-cleaning coatings, fire resistant panels and insulation materials) and 26 exposure scenarios, including lab, pilot and industrial scales. The document focuses on the structure, content and operation modes of the Risk Management Toolkit developed by the project to facilitate the implementation of “nano-management” in construction companies. The tool deploys and integrated approach OHSAS 18001 - ISO 31000 and is currently being validated on 5 industrial case studies.

  7. Strategies, methods and tools for managing nanorisks in construction

    International Nuclear Information System (INIS)

    De Ipiña, J M López; Vaquero, C; Boutry, D; Damlencourt, J F; Neofytou, P; Pilou, M; Jankowska, E; Larraza, I; Pina, R; Fernández, S; Contreras, S; Romero, A; Calderon, M; Swiezewsk, P; Otkallo, K; Pintea, A; Salazar, C; Oroz, T; Hargreaves, B; Ciobanu, R

    2015-01-01

    This paper presents a general overview of the work carried out by European project SCAFFOLD (GA 280535) during its 30 months of life, with special emphasis on risk management component. The research conducted by SCAFFOLD is focused on the European construction sector and considers 5 types of nanomaterials (TiO 2 , SiO 2 , carbon nanofibres, cellulose nanofibers and nanoclays), 6 construction applications (Depollutant mortars, selfcompacting concretes, coatings, self-cleaning coatings, fire resistant panels and insulation materials) and 26 exposure scenarios, including lab, pilot and industrial scales. The document focuses on the structure, content and operation modes of the Risk Management Toolkit developed by the project to facilitate the implementation of “nano-management” in construction companies. The tool deploys and integrated approach OHSAS 18001 - ISO 31000 and is currently being validated on 5 industrial case studies. (paper)

  8. Structure of diaphragm floor of reactor container, construction module and construction method thereof

    International Nuclear Information System (INIS)

    Hasegawa, Hiroshi; Oikawa, Tadaaki; Ushiroda, Koichi; Matsuura, Tadashi; Komaru, Toshimi; Nemoto, Yoichi; Makita, Tatsuo; Maezawa, Sumito.

    1998-01-01

    A diaphragm floor of a reactor container has a structure comprising iron beams buried in concretes and connection members connecting the iron beams and liners, in which the liners are supported by the iron beams, and the load of the iron reinforced concretes when formed on the liner is supported by the iron beams thereby enabling to construct a diaphragm floor with no or reduced amount of temporary support members. As a result, the construction operation can be promoted by reducing the amount of the temporary support members or making the removing operation of the temporary support members unnecessary. The concrete layer comprises at least two upper and lower layers of a firstly formed concrete layer and a subsequently formed concrete layer, and the iron beams have such a strength capable of enduring the load applied when the firstly formed concrete is placed. (N.H.)

  9. A revised simplex method for test construction problems

    NARCIS (Netherlands)

    Adema, Jos J.; Adema, J.J.

    1990-01-01

    Linear programming models with 0-1 variables are useful for the construction of tests from an item bank. Most solution strategies for these models start with solving the relaxed 0-1 linear programming model, allowing the 0-1 variables to take on values between 0 and 1. Then, a 0-1 solution is found

  10. Structure of steel reactor building and construction method therefor

    International Nuclear Information System (INIS)

    Yamakawa, Toshikimi.

    1997-01-01

    The building of the present invention contains a reactor pressure vessel, and has double steel plate walls endurable to elevation of inner pressure and keeping airtightness, and shielding concretes are filled between the double steel plate walls. It also has empty double steel plate walls not filled with concretes and has pipelines, vent ducts, wirings and a support structures for attaching them between the double steel plate walls. It is endurable to a great inner pressure satisfactory and keeps airtightness by the two spaced steel plates. It can be greatly reduced in the weight, and can be manufactured efficiently with high quality in a plant by so called module construction, and the dimension of the entire of the reactor building can be reduced. It is constructed in a dock, transported on the sea while having the space between the two steel plate walls as a ballast tanks, placed in the site, and shielding concretes are filled between the double steel plate walls. The term for the construction can be reduced, and the cost for the construction can be saved. (N.H.)

  11. Microbial ecology-based methods to characterize the bacterial communities of non-model insects.

    Science.gov (United States)

    Prosdocimi, Erica M; Mapelli, Francesca; Gonella, Elena; Borin, Sara; Crotti, Elena

    2015-12-01

    Among the animals of the Kingdom Animalia, insects are unparalleled for their widespread diffusion, diversity and number of occupied ecological niches. In recent years they have raised researcher interest not only because of their importance as human and agricultural pests, disease vectors and as useful breeding species (e.g. honeybee and silkworm), but also because of their suitability as animal models. It is now fully recognized that microorganisms form symbiotic relationships with insects, influencing their survival, fitness, development, mating habits and the immune system and other aspects of the biology and ecology of the insect host. Thus, any research aimed at deepening the knowledge of any given insect species (perhaps species of applied interest or species emerging as novel pests or vectors) must consider the characterization of the associated microbiome. The present review critically examines the microbiology and molecular ecology techniques that can be applied to the taxonomical and functional analysis of the microbiome of non-model insects. Our goal is to provide an overview of current approaches and methods addressing the ecology and functions of microorganisms and microbiomes associated with insects. Our focus is on operational details, aiming to provide a concise guide to currently available advanced techniques, in an effort to extend insect microbiome research beyond simple descriptions of microbial communities. Copyright © 2015 Elsevier B.V. All rights reserved.

  12. Applying Fishers' ecological knowledge to construct past and future lobster stocks in the Juan Fernandez Archipelago, Chile.

    Directory of Open Access Journals (Sweden)

    Tyler D Eddy

    Full Text Available Over-exploited fisheries are a common feature of the modern world and a range of solutions including area closures (marine reserves; MRs, effort reduction, gear changes, ecosystem-based management, incentives and co-management have been suggested as techniques to rebuild over-fished populations. Historic accounts of lobster (Jasus frontalis on the Chilean Juan Fernández Archipelago indicate a high abundance at all depths (intertidal to approximately 165 m, but presently lobsters are found almost exclusively in deeper regions of their natural distribution. Fishers' ecological knowledge (FEK tells a story of serial depletion in lobster abundance at fishing grounds located closest to the fishing port with an associated decline in catch per unit effort (CPUE throughout recent history. We have re-constructed baselines of lobster biomass throughout human history on the archipelago using historic data, the fishery catch record and FEK to permit examination of the potential effects of MRs, effort reduction and co-management (stewardship of catch to restore stocks. We employed a bioeconomic model using FEK, fishery catch and effort data, underwater survey information, predicted population growth and response to MR protection (no-take to explore different management strategies and their trade-offs to restore stocks and improve catches. Our findings indicate that increased stewardship of catch coupled with 30% area closure (MR provides the best option to reconstruct historic baselines. Based on model predictions, continued exploitation under the current management scheme is highly influenced by annual fluctuations and unsustainable. We propose a community-based co-management program to implement a MR in order to rebuild the lobster population while also providing conservation protection for marine species endemic to the Archipelago.

  13. Assessing the Ecological Relevance of Organic Discharge Limits for Constructed Wetlands by Means of a Model-Based Analysis

    Directory of Open Access Journals (Sweden)

    Natalia Donoso

    2018-01-01

    Full Text Available Polder watercourses within agricultural areas are affected by high chemical oxygen demand (COD and biological oxygen demand (BOD5 concentrations, due to intensive farming activities and runoff. Practical cases have shown that constructed wetlands (CWs are eco-friendly and cost-effective treatment systems which can reduce high levels of organic and nutrient pollution from agricultural discharges. However, accumulated recalcitrant organic matter, originated by in-situ sources or elements of CWs (i.e., plants or microbial detritus, limits the fulfilment of current COD discharge threshold. Thus, to evaluate its relevance regarding rivers ecosystem health preservation, we analysed the response of bio-indicators, the Multimetric Macroinvertebrate Index Flanders (MMIF and the occurrence of organic pollution sensitive taxa towards organic pollutants. For this purpose, statistical models were developed based on collected data in polder watercourses and CWs located in Flanders (Belgium. Results showed that, given the correlation between COD and BOD5, both parameters can be used to indicate the ecological and water quality conditions. However, the variability of the MMIF and the occurrence of sensitive species are explained better by BOD5, which captures a major part of their common effect. Whereas, recalcitrant COD and the interaction among other physico-chemical variables indicate a minor variability on the bio-indicators. Based on these outcomes we suggest a critical re-evaluation of current COD thresholds and moreover, consider other emerging technologies determining organic pollution levels, since this could support the feasibility of the implementation of CWs to tackle agricultural pollution.

  14. Enhancing criterion-related validity through bottom-up contextualization of personality inventories: The construction of an ecological conscientiousness scale

    NARCIS (Netherlands)

    dr René Butter; Marise Born

    2011-01-01

    In this paper the concept of "ecological personality scales" is introduced. These are contextualized inventories with a high ecological validity. They are developed in a bottom-up or qualitative way and combine a relatively high trait specificity with a relatively high situational specificity. An

  15. Progressive building methods in nuclear power plant construction

    International Nuclear Information System (INIS)

    Sikura, V.

    1980-01-01

    A detailed description is given of the new prospective technologies used in the construction of the Bohunice V-1 nuclear power plant. They include the use of steel and large-area forms, the use of profile sheets as a substitute for forms, assembled raw partitions, wall shells consisting of clamped porous concrete slabs, assembled roof shells, special finish of concrete walls, bearing wall deep foundation, the use of modern building machinery for concreting, reinforcing and welding works. (M.S.)

  16. A Systematic Method to Analyze Force Majeure in Construction Claims

    OpenAIRE

    Saud Alshammari; Khalid Al-Gahtani; Ibrahim Alhammad; Nuhu Braimah

    2017-01-01

    In construction delay claims, force majeure is normally recognized as an excusable risk that entitles contractors only to time extensions, but neither of the contracting parties is entitled to monetary compensation to recover delay damages. However, there are instances where contractors are entitled to both time and cost compensations, as evidenced by some court cases relating to force majeure claims. Such instances involve attributing the occurrence of the force majeure to the effect of othe...

  17. Hybrid Cryogenic Tank Construction and Method of Manufacture Therefor

    Science.gov (United States)

    DeLay, Thomas K. (Inventor)

    2011-01-01

    A lightweight, high-pressure cryogenic tank construction includes an inner layer comprising a matrix of fiber and resin suitable for cryogenic use. An outer layer in intimate contact with the inner layer provides support of the inner layer, and is made of resin composite. The tank is made by placing a fiber preform on a mandrel and infusing the preform with the resin. The infused preform is then encapsulated within the outer layer.

  18. Impacts of an Innovative Residential Construction Method on Internal Conditions

    Directory of Open Access Journals (Sweden)

    Roger Birchmore

    2015-02-01

    Full Text Available New Zealand houses are known for producing sub-optimal internal thermal conditions and unacceptably high internal moisture levels. These contribute to poor levels of health, mould and can coincide with the decay of structural timber frames. A proposed solution is to provide an alternative structure utilising plywood, a vapour check on the internal face of the timber frame and an additional air gap, followed by the internal lining. The internal vapour check is designed to prevent moisture vapour diffusion from inside into the frame and to permit moisture diffusion from outside through the structure to the internal environment. Two full scale houses had temperatures, dew points and humidity levels monitored in passive, unoccupied conditions. The test case house incorporated the innovative construction solution. The control house was of identical design and location, using standard construction practice. The calculated internal moisture content profile appeared to be unrelated to the external moisture content as expected, instead following the profile of the changing internal temperature. Whilst the innovative construction appeared to prevent moisture diffusion into the structure in winter and permit it inside in summer, this resulted in a generally higher internal relative humidity than the control house.

  19. An ecologically-based method for selecting ecological indicators for assessing risks to biological diversity from genetically-engineered plants

    DEFF Research Database (Denmark)

    Andow, D. A.; Lövei, Gabor L; Arpaia, Salvatore

    2013-01-01

    into ecological functional groups and selecting those that deliver the identified environmental values. (3) All of the species or ecosystem processes related to the selected functional groups are identified and (4) multi-criteria decision analysis (MCDA) is used to rank the indicator endpoint entities, which may...... adverse effects to biological diversity. The approach starts by (1) identifying the local environmental values so the ERA addresses specific concerns associated with local biological diversity. The model simplifies the indicator endpoint selection problem by (2) classifying biological diversity...... be species or ecological processes. MCDA focuses on those species and processes that are critical for the identified ecological functions and are likely to be highly exposed to the GE organism. The highest ranked indicator entities are selected for the next step. (5) Relevant risk hypotheses are identified...

  20. A Study on Nonconformance and Construction Method Improvement for Nuclear Power Plant

    International Nuclear Information System (INIS)

    Kim, Jong Yeob; Roh, Myung Sub

    2014-01-01

    Advanced power reactor was developed by domestic technology, and finally exported to abroad. In order to place the current nuclear power industrial base, construction has played a big role. Without magnificent construction technology, it would have been impossible to get a safe nuclear power plant on time and in budget. Construction industry occupies very large portion of the economy in South Korea and it has been a core of South Korea's economic growth. With a competitive construction industry and advanced nuclear power plant construction know-how, South Korea could provide safe and reliable nuclear power plants in domestic and world. However there are many repairs and number of corrective actions are in actual construction. Thus, this paper suggested the result of nonconformance and construction method improvement for nuclear power plant. Constructional engineering is a kind of science that has a variety of disciplines including structure, geology, mechanical equipment and other fields. Thus, the development of constructional engineering is closely associated with experience from failure and application advanced construction method. The recent experience in nuclear power plants construction has shown that those improved methods are fully applicable and can help shorten the construction schedule. The future of nuclear power plant construction seems to be more encouraged, even though it has many obstacles

  1. A study of best management practices for enhancing productivity in building projects: construction methods perspectives

    OpenAIRE

    Gurmu, Argaw Tarekegn; Aibinu, Ajibade Ayodeji; Chan, Toong Khuan

    2016-01-01

    This research investigates management practices that have the potential to enhance productivity in building projects by focusing on construction methods. In phase 1 of the study, face-to-face interviews with nineteen experts were conducted to identify the best management practices for construction methods. The qualitative data analysis reached saturation and resulted in a list of best practices for construction methods that are relevant to the local industry. The second phase used an industry...

  2. Methods and techniques for decontamination design and construction of facilities

    International Nuclear Information System (INIS)

    Augustin, X.; Cohen, S.

    1986-01-01

    TECHNICATOME and STMI have jointly solved a wide range of problems specific to decontamination from the very design studies up to operation. TECHNICATOME has brought its expertise in the design and construction of nuclear facilities concerned in particular with decontamination and radwaste management. STMI is an experienced operator with expertise in designing tools and developing advanced techniques in the same fields. The expertise of both companies in this field cumulated for many years has resulted in developing techniques and tools adapted to most of the decontamination problems including specific cases [fr

  3. Optimization of design and erection methods to minimize the construction time-schedule of EPR plants

    International Nuclear Information System (INIS)

    Pierrat, Michel; L'Huby, Yvan; Decelle, Alain

    1999-01-01

    This paper presents the results of the investigations made during the Basic Design of the EPR project (European Pressurized water Reactor) to shorten the construction schedule. A 57 months construction schedule can be reached for the first unit. The investigations concern both design and construction methods. (author)

  4. A Body of Work Standard-Setting Method with Construct Maps

    Science.gov (United States)

    Wyse, Adam E.; Bunch, Michael B.; Deville, Craig; Viger, Steven G.

    2014-01-01

    This article describes a novel variation of the Body of Work method that uses construct maps to overcome problems of transparency, rater inconsistency, and scores gaps commonly occurring with the Body of Work method. The Body of Work method with construct maps was implemented to set cut-scores for two separate K-12 assessment programs in a large…

  5. Comparison of Different Assembling Techniques Regarding Cost, Durability, and Ecology - A Survey of Multi-layer Wooden Panel Assembly Load-Bearing Construction Elements

    Directory of Open Access Journals (Sweden)

    Dietrich Buck

    2015-10-01

    Full Text Available Wood is a pure, sustainable, renewable material. The increasing use of wood for construction can improve its sustainability. There are various techniques to assemble multi-layer wooden panels into prefabricated, load-bearing construction elements. However, comparative market and economy studies are still scarce. In this study, the following assembling techniques were compared: laminating, nailing, stapling, screwing, stress laminating, doweling, dovetailing, and wood welding. The production costs, durability, and ecological considerations were presented. This study was based on reviews of published works and information gathered from 27 leading wood product manufacturing companies in six European countries. The study shows that the various techniques of assembling multi-layer wooden construction panel elements are very different. Cross laminated timber (CLT exhibited the best results in terms of cost and durability. With regard to ecological concerns, dovetailing is the best. Taking into account both durability and ecological considerations, wooden screw-doweling is the best. These alternatives give manufacturers some freedom of choice regarding the visibility of surfaces and the efficient use of lower-quality timber. CLT is the most cost-effective, is not patented, and is a well-established option on the market today.

  6. Ecological studies related to construction of the Defense Waste Processing Facility on the Savannah River Site. FY 1989--1990 annual report

    Energy Technology Data Exchange (ETDEWEB)

    Pechmann, J.H.K.; Scott, D.E.; McGregor, J.H.; Estes, R.A.; Chazal, A.C.

    1993-02-01

    The Defense Waste Processing Facility (DWPF) was built on the Savannah River Site (SRS) during the mid-1980`s. The Savannah River Ecology Laboratory (SREL) has completed 12 years of ecological studies related to the construction of the DWPF complex. Prior to construction, the 600-acre site (S-Area) contained a Carolina bay and the headwaters of a stream. Research conducted by the SREL has focused primarily on four questions related to these wetlands: (1) Prior to construction, what fauna and flora were present at the DWPF site and at similar, yet undisturbed, alternative sites? (2) By comparing the Carolina bay at the DWPF site (Sun Bay) with an undisturbed control Carolina bay (Rainbow Bay), what effect is construction having on the organisms that inhabited the DWPF site? (3) By comparing control streams with streams on the periphery of the DWPF site, what effect is construction having on the peripheral streams? (4) How effective have efforts been to lessen the impacts of construction, both with respect to erosion control measures and the construction of ``refuge ponds`` as alternative breeding sites for amphibians that formerly bred at Sun Bay? Through the long-term census-taking of biota at the DWPF site and Rainbow Bay, SREL has begun to evaluate the impact of construction on the biota and the effectiveness of mitigation efforts. Similarly, the effects of erosion from the DWPF site on the water quality of S-Area peripheral streams are being assessed. This research provides supporting data relevant to the National Environmental Policy Act (NEPA) of 1969, the Endangered Species Act of 1973, Executive Orders 11988 (Floodplain Management) and 11990 (Protection of Wetlands), and United States Department of Energy (DOE) Guidelines for Compliance with Floodplain/Wetland Environmental Review Requirements (10CFR1022).

  7. Ecological studies related to the construction of the Defense Waste Processing Facility on the Savannah River Site. Annual report, FY-1991 and FY-1992

    Energy Technology Data Exchange (ETDEWEB)

    Scott, D.E.; Chazel, A.C.; Pechmann, J.H.K.; Estes, R.A.

    1993-06-01

    The Defense Waste Processing Facility (DWPF) was built on the Savannah River Site (SRS) during the mid-1980`s. The Savannah River Ecology Laboratory (SREL) has completed 14 years of ecological studies related to the construction of the DWPF complex. Prior to construction, the 600-acre site (S-Area) contained a Carolina bay and the headwaters of a stream. Research conducted by the SREL has focused primarily on four questions related to these wetlands: (1) Prior to construction, what fauna and flora were present at the DWPF site and at similar, yet undisturbed, alternative sites? (2) By comparing the Carolina bay at the DWPF site (Sun Bay) with an undisturbed control Carolina bay (Rainbow Bay), what effect is construction having on the organisms that inhabited the DWPF site? (3) By comparing control streams with streams on the periphery of the DWPF site, what effect is construction having on the peripheral streams? (4) How effective have efforts been to lessen the impacts of construction, both with respect to erosion control measures and the construction of ``refuge ponds`` as alternative breeding sites for amphibians that formerly bred at Sun Bay? Through the long-term census-taking of biota at the DWPF site and Rainbow Bay, SREL has begun to evaluate the impact of construction on the biota and the effectiveness of mitigation efforts. Similarly, the effects of erosion from the DWPF site on the water quality of S-Area peripheral streams are being assessed. This research provides supporting data relevant to the National Environmental Policy Act (NEPA) of 1969, the Endangered Species Act of 1973, Executive Orders 11988 (Floodplain Management) and 11990 (Protection of Wetlands), and United States Department of Energy (DOE) Guidelines for Compliance with Floodplain/Wetland Environmental Review Requirements (10 CFR 1022).

  8. Pressure test method for reactor pressure vessel in construction field

    International Nuclear Information System (INIS)

    Takeda, Masakado; Ushiroda, Koichi; Miyahara, Ryohei; Takano, Hiroshi; Matsuura, Tadashi; Sato, Keiya.

    1998-01-01

    Plant constitutional parts as targets of both of a primary pressure test and a secondary pressure test are disposed in communication with a reactor pressure vessel, and a pressure of the primary pressure test is applied to the targets of both tests, so that the primary pressure test and the second pressure test are conducted together. Since the number of pressure tests can be reduced to promote construction, and the number of workers can also be reduced. A pressure exceeding the maximum pressure upon use is applied to the pressure vessel after disposing the incore structures, to continuously conduct the primary pressure test and the secondary pressure test joined together and an incore flowing test while closing the upper lid of the pressure vessel as it is in the construction field. The number of opening/closing of the upper lid upon conducting every test can be reduced, and since the pressure resistance test is conducted after arranging circumference conditions for the incore flowing test, the tests can be conducted collectively also in view of time. (N.H.)

  9. Pyramiding tumuli waste disposal site and method of construction thereof

    Science.gov (United States)

    Golden, Martin P.

    1989-01-01

    An improved waste disposal site for the above-ground disposal of low-level nuclear waste as disclosed herein. The disposal site is formed from at least three individual waste-containing tumuli, wherein each tumuli includes a central raised portion bordered by a sloping side portion. Two of the tumuli are constructed at ground level with adjoining side portions, and a third above-ground tumulus is constructed over the mutually adjoining side portions of the ground-level tumuli. Both the floor and the roof of each tumulus includes a layer of water-shedding material such as compacted clay, and the clay layer in the roofs of the two ground-level tumuli form the compacted clay layer of the floor of the third above-ground tumulus. Each tumulus further includes a shield wall, preferably formed from a solid array of low-level handleable nuclear wate packages. The provision of such a shield wall protects workers from potentially harmful radiation when higher-level, non-handleable packages of nuclear waste are stacked in the center of the tumulus.

  10. Investigation of Industrialised Building System Performance in Comparison to Conventional Construction Method

    Directory of Open Access Journals (Sweden)

    Othuman Mydin M.A.

    2014-03-01

    Full Text Available Conventional construction methods are still widely practised, although many researches have indicated that this method is less effective compared to the IBS construction method. The existence of the IBS has added to the many techniques within the construction industry. This study is aimed at making comparisons between the two construction approaches. Case studies were conducted at four sites in the state of Penang, Malaysia. Two projects were IBS-based while the remaining two deployed the conventional method of construction. Based on an analysis of the results, it can be concluded that the IBS approach has more to offer compared to the conventional method. Among these advantages are shorter construction periods, reduced overall costs, less labour needs, better site conditions and the production of higher quality components.

  11. Molecular ecological network analyses.

    Science.gov (United States)

    Deng, Ye; Jiang, Yi-Huei; Yang, Yunfeng; He, Zhili; Luo, Feng; Zhou, Jizhong

    2012-05-30

    Understanding the interaction among different species within a community and their responses to environmental changes is a central goal in ecology. However, defining the network structure in a microbial community is very challenging due to their extremely high diversity and as-yet uncultivated status. Although recent advance of metagenomic technologies, such as high throughout sequencing and functional gene arrays, provide revolutionary tools for analyzing microbial community structure, it is still difficult to examine network interactions in a microbial community based on high-throughput metagenomics data. Here, we describe a novel mathematical and bioinformatics framework to construct ecological association networks named molecular ecological networks (MENs) through Random Matrix Theory (RMT)-based methods. Compared to other network construction methods, this approach is remarkable in that the network is automatically defined and robust to noise, thus providing excellent solutions to several common issues associated with high-throughput metagenomics data. We applied it to determine the network structure of microbial communities subjected to long-term experimental warming based on pyrosequencing data of 16 S rRNA genes. We showed that the constructed MENs under both warming and unwarming conditions exhibited topological features of scale free, small world and modularity, which were consistent with previously described molecular ecological networks. Eigengene analysis indicated that the eigengenes represented the module profiles relatively well. In consistency with many other studies, several major environmental traits including temperature and soil pH were found to be important in determining network interactions in the microbial communities examined. To facilitate its application by the scientific community, all these methods and statistical tools have been integrated into a comprehensive Molecular Ecological Network Analysis Pipeline (MENAP), which is open

  12. Constructs and methods for genome editing and genetic engineering of fungi and protists

    Science.gov (United States)

    Hittinger, Christopher Todd; Alexander, William Gerald

    2018-01-30

    Provided herein are constructs for genome editing or genetic engineering in fungi or protists, methods of using the constructs and media for use in selecting cells. The construct include a polynucleotide encoding a thymidine kinase operably connected to a promoter, suitably a constitutive promoter; a polynucleotide encoding an endonuclease operably connected to an inducible promoter; and a recognition site for the endonuclease. The constructs may also include selectable markers for use in selecting recombinations.

  13. Comparative Analysis of Fuzzy Set Defuzzification Methods in the Context of Ecological Risk Assessment

    Directory of Open Access Journals (Sweden)

    Užga-Rebrovs Oļegs

    2017-12-01

    Full Text Available Fuzzy inference systems are widely used in various areas of human activity. Their most widespread use lies in the field of fuzzy control of technical devices of different kind. Another direction of using fuzzy inference systems is modelling and assessment of different kind of risks under insufficient or missing objective initial data. Fuzzy inference is concluded by the procedure of defuzzification of the resulting fuzzy sets. A large number of techniques for implementing the defuzzification procedure are available nowadays. The paper presents a comparative analysis of some widespread methods of fuzzy set defuzzification, and proposes the most appropriate methods in the context of ecological risk assessment.

  14. A new method of constructing scalar-flat Kaehler surfaces

    International Nuclear Information System (INIS)

    Kim, Jongsu; Pontecorvo, M.

    1993-10-01

    Building on the work of Donaldson-Friedman we present a geometric way of constructing anti-self-dual hermitian metrics on compact complex surfaces which is based on the relative complex deformations of singular 3-folds with divisors. Some of the consequences are that under a mild condition, fully described by LeBrun-Singer, any blow up of a scalar-flat Kaehler surface admits scalar-flat Kaehler metrics; this is used to prove that such extremal Kaehler metrics exists on an open dense subset of the moduli space of non-minimal ruled surfaces of genus g ≥ 2. Related results have been obtained by LeBrun-Singer. (author). 25 refs

  15. Statistical methods and their applications in constructional engineering

    International Nuclear Information System (INIS)

    1977-01-01

    An introduction into the basic terms of statistics is followed by a discussion of elements of the probability theory, customary discrete and continuous distributions, simulation methods, statistical supporting framework dynamics, and a cost-benefit analysis of the methods introduced. (RW) [de

  16. A Rapid Method to Score Stream Reaches Based on the Overall Performance of Their Main Ecological Functions

    Science.gov (United States)

    Rowe, David K.; Parkyn, Stephanie; Quinn, John; Collier, Kevin; Hatton, Chris; Joy, Michael K.; Maxted, John; Moore, Stephen

    2009-06-01

    A method was developed to score the ecological condition of first- to third-order stream reaches in the Auckland region of New Zealand based on the performance of their key ecological functions. Such a method is required by consultants and resource managers to quantify the reduction in ecological condition of a modified stream reach relative to its unmodified state. This is a fundamental precursor for the determination of fair environmental compensation for achieving no-net-loss in overall stream ecological value. Field testing and subsequent use of the method indicated that it provides a useful measure of ecological condition related to the performance of stream ecological functions. It is relatively simple to apply compared to a full ecological study, is quick to use, and allows identification of the degree of impairment of each of the key ecological functions. The scoring system was designed so that future improvements in the measurement of stream functions can be incorporated into it. Although the methodology was specifically designed for Auckland streams, the principles can be readily adapted to other regions and stream types.

  17. Cable Tension Preslack Method Construction Simulation and Engineering Application for a Prestressed Suspended Dome

    Directory of Open Access Journals (Sweden)

    Xuechun Liu

    2015-01-01

    Full Text Available To solve the shortage of traditional construction simulation methods for suspended dome structures, based on friction elements, node coupling technology, and local cooling, the cable tension preslack method is proposed in this paper, which is suitable for the whole process construction simulation of a suspended dome. This method was used to simulate the construction process of a large-span suspended dome case study. The effects on the simulation results of location deviation of joints, construction temperature, construction temporary supports, and friction of the cable-support joints were analyzed. The cable tension preslack method was demonstrated by comparing the data from the construction simulation with measured results, providing the control cable tension and the control standards for construction acceptance. The analysis demonstrated that the position deviation of the joint has little effect on the control value; the construction temperature and the friction of the cable-support joint significantly affect the control cable tension. The construction temperature, the temporary construction supports, and the friction of the cable-support joints all affect the internal force and deflection in the tensioned state but do not significantly affect the structural bearing characteristics at the load state. The forces should be primarily controlled in tensioned construction, while the deflections are controlled secondarily.

  18. Numerical ecology with R

    CERN Document Server

    Borcard, Daniel; Legendre, Pierre

    2018-01-01

    This new edition of Numerical Ecology with R guides readers through an applied exploration of the major methods of multivariate data analysis, as seen through the eyes of three ecologists. It provides a bridge between a textbook of numerical ecology and the implementation of this discipline in the R language. The book begins by examining some exploratory approaches. It proceeds logically with the construction of the key building blocks of most methods, i.e. association measures and matrices, and then submits example data to three families of approaches: clustering, ordination and canonical ordination. The last two chapters make use of these methods to explore important and contemporary issues in ecology: the analysis of spatial structures and of community diversity. The aims of methods thus range from descriptive to explanatory and predictive and encompass a wide variety of approaches that should provide readers with an extensive toolbox that can address a wide palette of questions arising in contemporary mul...

  19. The Stick Design Test on the assessment of older adults with low formal education: evidences of construct, criterion-related and ecological validity.

    Science.gov (United States)

    de Paula, Jonas Jardim; Costa, Mônica Vieira; Bocardi, Matheus Bortolosso; Cortezzi, Mariana; De Moraes, Edgar Nunes; Malloy-Diniz, Leandro Fernandes

    2013-12-01

    The assessment of visuospatial abilities is usually performed by drawing tasks. In patients with very low formal education, the use of these tasks might be biased by their cultural background. The Stick Design Test was developed for the assessment of this population. We aim to expand the test psychometric properties by assessing its construct, criterion-related and ecological validity in older adults with low formal education. Healthy older adults (n = 63) and Alzheimer's disease patients (n = 92) performed the Stick Design Test, Mini-Mental State Examination, Digit Span Forward and the Clock Drawing Test. Their caregivers answered Personal Care and Instrumental Activities of Daily Living). Construct validity was assessed by factor analysis, convergent correlations (with the Clock Drawing Test), and divergent correlations (with Digit Span Forward); criterion-related validity by receiver operating characteristic curve analysis and binary logistic regression; and Ecological validity by correlations with ADL. The test factor structure was composed by one component (R 2 = 64%). Significant correlations with the Clock Drawing Test and Digit Span Forward were found, and the relationship was stronger with the first measure. The test was less associated with formal education than the Clock Drawing Test. It classified about 76% of the participants correctly and had and additive effect with the Mini-Mental State Examination (84% of correct classification). The test also correlated significantly with measures of ADL, suggesting ecological validity. The Stick Design Test shows evidence of construct, criterion-related and ecological validity. It is an interesting alternative to drawing tasks for the assessment of visuospatial abilities.

  20. Estimation methods with ordered exposure subject to measurement error and missingness in semi-ecological design

    Directory of Open Access Journals (Sweden)

    Kim Hyang-Mi

    2012-09-01

    Full Text Available Abstract Background In epidemiological studies, it is often not possible to measure accurately exposures of participants even if their response variable can be measured without error. When there are several groups of subjects, occupational epidemiologists employ group-based strategy (GBS for exposure assessment to reduce bias due to measurement errors: individuals of a group/job within study sample are assigned commonly to the sample mean of exposure measurements from their group in evaluating the effect of exposure on the response. Therefore, exposure is estimated on an ecological level while health outcomes are ascertained for each subject. Such study design leads to negligible bias in risk estimates when group means are estimated from ‘large’ samples. However, in many cases, only a small number of observations are available to estimate the group means, and this causes bias in the observed exposure-disease association. Also, the analysis in a semi-ecological design may involve exposure data with the majority missing and the rest observed with measurement errors and complete response data collected with ascertainment. Methods In workplaces groups/jobs are naturally ordered and this could be incorporated in estimation procedure by constrained estimation methods together with the expectation and maximization (EM algorithms for regression models having measurement error and missing values. Four methods were compared by a simulation study: naive complete-case analysis, GBS, the constrained GBS (CGBS, and the constrained expectation and maximization (CEM. We illustrated the methods in the analysis of decline in lung function due to exposures to carbon black. Results Naive and GBS approaches were shown to be inadequate when the number of exposure measurements is too small to accurately estimate group means. The CEM method appears to be best among them when within each exposure group at least a ’moderate’ number of individuals have their

  1. Constructing a sophistication index as a method of market ...

    African Journals Online (AJOL)

    segmentation method offers researchers and marketing practitioners a ..... Pallant (2010) recommends a minimum value of 0.6 for a good analysis. .... a means of profiling segments, stock farmers are not classified as unsophisticated,.

  2. On Consistency Test Method of Expert Opinion in Ecological Security Assessment.

    Science.gov (United States)

    Gong, Zaiwu; Wang, Lihong

    2017-09-04

    To reflect the initiative design and initiative of human security management and safety warning, ecological safety assessment is of great value. In the comprehensive evaluation of regional ecological security with the participation of experts, the expert's individual judgment level, ability and the consistency of the expert's overall opinion will have a very important influence on the evaluation result. This paper studies the consistency measure and consensus measure based on the multiplicative and additive consistency property of fuzzy preference relation (FPR). We firstly propose the optimization methods to obtain the optimal multiplicative consistent and additively consistent FPRs of individual and group judgments, respectively. Then, we put forward a consistency measure by computing the distance between the original individual judgment and the optimal individual estimation, along with a consensus measure by computing the distance between the original collective judgment and the optimal collective estimation. In the end, we make a case study on ecological security for five cities. Result shows that the optimal FPRs are helpful in measuring the consistency degree of individual judgment and the consensus degree of collective judgment.

  3. How to Construct a Mixed Methods Research Design

    OpenAIRE

    Schoonenboom, Judith; Johnson, R. Burke

    2017-01-01

    This article provides researchers with knowledge of how to design a high quality mixed methods research study. To design a mixed study, researchers must understand and carefully consider each of the dimensions of mixed methods design, and always keep an eye on the issue of validity. We explain the seven major design dimensions: purpose, theoretical drive, timing (simultaneity and dependency), point of integration, typological versus interactive design approaches, planned versus emergent desig...

  4. A new method to construct co-author networks

    Science.gov (United States)

    Liu, Jie; Li, Yunpeng; Ruan, Zichan; Fu, Guangyuan; Chen, Xiaowu; Sadiq, Rehan; Deng, Yong

    2015-02-01

    In this paper, we propose a new method to evaluate the importance of nodes in a given network. The proposed method is based on the PageRank algorithm. However, we have made necessary improvements to combine the importance of the node itself and that of its community status. First, we propose an improved method to better evaluate the real impact of a paper. The proposed method calibrates the real influence of a paper over time. Then we propose a scheme of evaluating the contribution of each author in a paper. We later develop a new method to combine the information of the author itself and the structure of the co-author network. We use the number of co-authorship to calculate the effective distance between two authors, and evaluate the strength of their influence to each other with the law of gravity. The strength of influence is used to build a new network of authors, which is a comprehensive topological representation of both the quality of the node and its role in network. Finally, we apply our method to the Erdos co-author community and AMiner Citation Network to identify the most influential authors.

  5. Mathematical Methods of Managing Economic Sustainability of the Construction Company

    Science.gov (United States)

    Kostuchenko, Vasiliy; Zdanov, Andrej; Rodionov, Anatolij

    2017-10-01

    This article presents a long-term research in developing innovative mathematical techniques of managing the contractor’s economic sustainability proven by some experimental studies. The article aims at presenting some practical results of applying these techniques to the scientific community. This research presents a description of some applied mathematical models, views, and some results of their practical application in the applied field for the purposes of evaluating operational sustainability and minimizing losses in the process of managing the company. The authors have put the technology they have developed to practical use, and the article presents the results of such application. The authors have put the developed technology to practical use. Company management also means the management of power consumption, which is highly vital both for the construction and maintenance of buildings and structures. The articles also dwell on some possible improvements of managing energy consumption within the framework of the general management of company’s economic sustainability, because these phenomena have a tight organic interdependence. The authors continue researching this direction in order to improve the production efficiency of the proposed technologies as well as to eliminate some drawbacks they have spotted.

  6. Methods for the preparation of protein-oligonucleotide-lipid constructs.

    Science.gov (United States)

    Takasaki, Jennifer; Raney, Sameersingh G; Chikh, Ghania; Sekirov, Laura; Brodsky, Irina; Tam, Ying; Ansell, Steven M

    2006-01-01

    A mixture of ionizable cationic lipids, steric barrier lipids, and colipids is used to encapsulate oligonucleotide DNA in lipidic particles called SALP. This material is under development as an adjuvant for vaccines. Previously we have shown that coupling the antigen directly to the surface of SALP can lead to enhanced immunological responses in vivo. Two different methods for preparing ovalbumin-SALP were assessed in this work. Originally the conjugates were prepared by treating SALP containing a maleimide-derivatized lipid with thiolated ovalbumin, a method we refer to as active coupling. This reaction was found to be difficult to control and generally resulted in low coupling efficiencies. The issues relating to this approach were characterized. We have recently developed alternative techniques based on first coupling ovalbumin to a micelle and then incubating the resultant product with SALP, methods we refer to as passive coupling. We have shown that this method allows accurate control of the levels of protein associated SALP and does not suffer from surface saturation effects seen with the active coupling method that places maximum limits on the amount of protein that can be coupled to the SALP surface. The products from the passive coupling protocol are shown to have activity comparable to those derived from the active coupling protocol in investigations of in vivo immune responses.

  7. Construction of molecular potential energy curves by an optimization method

    Science.gov (United States)

    Wang, J.; Blake, A. J.; McCoy, D. G.; Torop, L.

    1991-01-01

    A technique for determining the potential energy curves for diatomic molecules from measurements of diffused or continuum spectra is presented. It is based on a numerical procedure which minimizes the difference between the calculated spectra and the experimental measurements and can be used in cases where other techniques, such as the conventional RKR method, are not applicable. With the aid of suitable spectral data, the associated dipole electronic transition moments can be simultaneously obtained. The method is illustrated by modeling the "longest band" of molecular oxygen to extract the E 3Σ u- and B 3Σ u- potential curves in analytical form.

  8. A new bricklayers' method for use in the construction industry

    NARCIS (Netherlands)

    Luijsterburg, P.A.J.; Bongers, P.M.; Vroome, E.M.M. de

    2005-01-01

    Objectives: The aim of this study was to investigate the effect of raised bricklaying on physical workload, reported musculoskeletal disorders, sickness absence, and job satisfaction. Methods: A controlled intervention study with a follow-up period of 10 months was performed among 202 bricklayers

  9. A new bricklayers' method for use in the construction industry

    NARCIS (Netherlands)

    Luijsterburg, P.A.; Bongers, P.M.; de Vroome, E.M.M.

    2005-01-01

    OBJECTIVES: The aim of this study was to investigate the effect of raised bricklaying on physical workload, reported musculoskeletal disorders, sickness absence, and job satisfaction. METHODS: A controlled intervention study with a follow-up period of 10 months was performed among 202 bricklayers

  10. A method of constructive quantum mechanics of remarkable hidden beauty

    Czech Academy of Sciences Publication Activity Database

    Znojil, Miloslav

    2016-01-01

    Roč. 49, č. 45 (2016), č. článku 451003. ISSN 1751-8113 R&D Projects: GA ČR GA16-22945S Institutional support: RVO:61389005 Keywords : eigenvalue problems * iteration method Subject RIV: BE - Theoretical Physics Impact factor: 1.857, year: 2016

  11. A New Method for Noninvasive Genetic Sampling of Saliva in Ecological Research.

    Directory of Open Access Journals (Sweden)

    Diana Lobo

    Full Text Available Noninvasive samples for genetic analyses have become essential to address ecological questions. Popular noninvasive samples such as faeces contain degraded DNA which may compromise genotyping success. Saliva is an excellent alternative DNA source but scarcity of suitable collection methods makes its use anecdotal in field ecological studies. We develop a noninvasive method of collection that combines baits and porous materials able to capture saliva. We report its potential in optimal conditions, using confined dogs and collecting saliva early after deposition. DNA concentration in saliva extracts was generally high (mean 14 ng μl(-1. We correctly identified individuals in 78% of samples conservatively using ten microsatellite loci, and 90% of samples using only eight loci. Consensus genotypes closely matched reference genotypes obtained from hair DNA (99% of identification successes and 91% of failures. Mean genotyping effort needed for identification using ten loci was 2.2 replicates. Genotyping errors occurred at a very low frequency (allelic dropout: 2.3%; false alleles: 1.5%. Individual identification success increased with duration of substrate handling inside dog's mouth and the volume of saliva collected. Low identification success was associated with baits rich in DNA-oxidant polyphenols and DNA concentrations <1 ng μl(-1. The procedure performed at least as well as other noninvasive methods, and could advantageously allow detection of socially low-ranked individuals underrepresented in sources of DNA that are involved in marking behaviour (faeces or urine. Once adapted and refined, there is promise for this technique to allow potentially high rates of individual identification in ecological field studies requiring noninvasive sampling of wild vertebrates.

  12. ECOLOGY-ECONOMICAL ASSESSMENT OF NEW RECLAMATION METHOD FOR CURRENTLY WORKING TECHNOGENIC MASSIFS

    Directory of Open Access Journals (Sweden)

    Alexey Strizhenok

    2017-01-01

    Full Text Available One of the most relevant problems of the mining industry is the need to reduce the negative impact of technogenic massifs formed by wastes of extraction and processing of mineral raw materials. This problem has a significant meaning for currently used massifs, because traditional ways of reclamation are not suitable for them. The article describes the results of a scientific study on the development of the most efficient reclamation method for currently used technogenic massifs. Described in detail the main results of the field observations, methods and equipment of laboratory experiments conducted to determine agro-chemical properties of the soil and optimal composition of binder agent. The article also provides ecological and economic assessment of the proposed method of reclamation. The study was conducted on the example of the real technogenic massif, formed by wastes of phosphorus ore processing.

  13. Case study on ventilation method development for Bar-Boljare highway tunnels construction in Montenegro

    Directory of Open Access Journals (Sweden)

    Cvjetić Aleksandar S.

    2017-01-01

    Full Text Available Sometimes tunnel construction is a necessity regardless of its purpose due to many reasons, to mention some of them: limited space, safe operation, environmental protection etc. In those cases, one of the main aspects concerning an appropriate design of a tunnel construction is site ventilation. Ventilation is required during the construction of any tunnel regardless of technology used to construct it. Three major construction ventilation schemes are typically applied. Which one will be use are often in dependency of the site requirements. In this paper is presented case study on ventilation method development for the highway tunnels construction and it includes ventilation solutions for tunnels ‘Suka’, ‘Vežešnik’, ‘Mrke’ and ‘Vjeternik’ during construction phase. The tunnels are part of the Bar-Boljare highway which is also a part of the Trans-European Highway (THE through the Republic of Montenegro.

  14. Concepts of ecological construction. Seminar volume of the Central Information Bureau for Environmental Consulting in Bavaria. Vol. 6; Oekologisches Bauen. Seminarband der Zentralen Informationsstelle Umweltberatung Bayern. Bd. 6

    Energy Technology Data Exchange (ETDEWEB)

    Kohmanns, B. [comp.; Koller, U. [comp.; Klemmer, A. [comp.; Haury, H.J. [comp.

    1995-09-01

    On 11 May 1995 the Central Information Bureau for Environmental Consulting in Bavaria held its sixth seminar. The seminar was dedicated to the subject `Concepts of Ecological Construction`. It attracted some 80 representatives of environmental consulting offices and other authorities assigned to environmental consulting tasks. Leading scientists from research institutions and the administration presented the current state of research into the ecological aspects of construction and planning. The lecturers dealt with diverse topics ranging from building site selection over questions on energy to aspects of building materials and illustrated the new possibilities of environmentally adapted construction by reference to practical examples. (orig./HW) [Deutsch] Am 11. Mai 1995 veranstaltete die Zentrale Informationsstelle, Umweltberatung Bayern ihr sechstes Seminar. Thema der Seminarveranstaltung, an der rund 80 Vertreterinnen und Vertreter von Umweltberatungsstellen und anderen mit Umweltberatung beauftragten Behoerden teilnahmen, war `Oekologisches Bauen`. Fuehrende Wissenschaftler und Wissenschaftlerinnen aus Forschung und Behoerden stellten den aktuellen Stand der Forschung oekologischer Aspekte des Bauens und Planens dar. Beginnend mit Kriterien fuer die Standortsuche von Bauvorhaben ueber Energiefragen und Aspekte oekologischer Baustoffe fuehrten die Referentinnen und Referenten schliesslich auch an praktischen Beispielen neue Moeglichkeiten des umweltgerechten Bauens vor. (orig./HW)

  15. MONITORING AND CONTROLLING ON SURFACE SETTLEMENT IN SAND AND GRAVEL STRATA CAUSED BY SUBWAY STATION CONSTRUCTION APPLYING PIPE-ROOF PRE-CONSTRUCTION METHOD (PPM

    Directory of Open Access Journals (Sweden)

    Xian Yang

    2017-07-01

    Full Text Available Pipe-roof Pre-construction Method (PPM is regarded as a safer method to construct underground space, especially suitable for the construction sites with dense surface buildings, underground pipelines and complicated geological conditions. Xinleyizhi Station of Shenyang Metro constructed by PPM. In order to ensure safety in construction, the whole construction process was closely monitored. In this paper, monitoring results of surface settlement in PPM is analyzed. According to the monitoring results, the most serious settlement occurred in pipes jacking, which was the first and the most crucial step in PPM. The settlement reasons in each step are discussed, and controlling methods of surface settlement in each step are elaborated. Through close monitoring and timely control, the construction of Xinleyizhi Station completed smoothly. Because of the obvious advantages of PPM, the method will be used more widely in construction of shallow buried excavation under complicated surrounding and geological conditions.

  16. LOGISTICS RISK RESEARCH OF PREFABRICATED HOUSE CONSTRUCTION ENGINEERING BASED ON CREDIBILITY METHOD

    Directory of Open Access Journals (Sweden)

    Xiaoping Bai

    2017-07-01

    Full Text Available In recent years, the prefabricated house industry has rapid development,.Because of fewer suppliers, higher demand transport scheme and complex quality test, the risks of construction engineering logistics links are relatively high. Studying how to effectively evaluate the risks of construction engineering logistics links is significant. According to the characteristics of the prefabricated house construction engineering, we analyse the construction engineering logistics risks and use the combined weights method to determine the weight of indexes which contains both subjective and objective factors, to improve the scientific value and the validity of the assessment. Based on credibility measure method, a new logistics risk evaluation model in prefabricated housing is established to estimate the risk during making prefabricated house construction engineering. The presented model can avoid the subjectivity of selecting the membership function and solve the problem of how to comprehensively assess the construction engineering logistics risk in a certain extent.

  17. 沼泽湿地生态储水量及生态需水量计算方法%Method for calculating ecological water storage and ecological water requirement of marsh

    Institute of Scientific and Technical Information of China (English)

    李丽娟; 李九一; 粱丽乔; 柳玉梅

    2009-01-01

    As one of the most typical wetlands, marsh plays an important role in hydrological and economic aspects, especially in keeping biological diversity. In this study, the definition and connotation of the ecological water storage of marsh is discussed for the first time, and its distinction and relationship with ecological water requirement are also analyzed. Furthermore, the gist and method of calculating ecological water storage and ecological water requirement have been provided, and Momoge wetland has been given as an example of calculation of the two variables. Ecological water use of marsh can be ascertained according to ecological water storage and ecological water requirement. For reasonably spatial and temporal varia-tion of water storage and rational water resources planning, the suitable quantity of water supply to marsh can be calculated according to the hydrological conditions, ecological de-mand and actual water resources.

  18. A novel construction method of QC-LDPC codes based on CRT for optical communications

    Science.gov (United States)

    Yuan, Jian-guo; Liang, Meng-qi; Wang, Yong; Lin, Jin-zhao; Pang, Yu

    2016-05-01

    A novel construction method of quasi-cyclic low-density parity-check (QC-LDPC) codes is proposed based on Chinese remainder theory (CRT). The method can not only increase the code length without reducing the girth, but also greatly enhance the code rate, so it is easy to construct a high-rate code. The simulation results show that at the bit error rate ( BER) of 10-7, the net coding gain ( NCG) of the regular QC-LDPC(4 851, 4 546) code is respectively 2.06 dB, 1.36 dB, 0.53 dB and 0.31 dB more than those of the classic RS(255, 239) code in ITU-T G.975, the LDPC(32 640, 30 592) code in ITU-T G.975.1, the QC-LDPC(3 664, 3 436) code constructed by the improved combining construction method based on CRT and the irregular QC-LDPC(3 843, 3 603) code constructed by the construction method based on the Galois field ( GF( q)) multiplicative group. Furthermore, all these five codes have the same code rate of 0.937. Therefore, the regular QC-LDPC(4 851, 4 546) code constructed by the proposed construction method has excellent error-correction performance, and can be more suitable for optical transmission systems.

  19. Radioisotopic methods for quality control of works and studies while constructing foundations and underground structures

    International Nuclear Information System (INIS)

    Smorodinov, M.I.

    1980-01-01

    The data on the use of radioisotope methods of quality control of various kinds of construction works when building foundations and underground constructions and when carrying out scientific research, are presented. Devices and equipment are described, their block diagrams are presented. The experience in using radioisotope devices to control the quality of construction works, is presented. The problems of economic effectivenes of works using radioisotope devices are solved

  20. Economic evaluation of neutral streams and of river construction methods

    International Nuclear Information System (INIS)

    Donat, M.

    1998-12-01

    There are no current markets for the management and restoration of natural streams. However, economic elements tend to play an increasingly important role when it comes to decisions about river management activities. Although preference structures of market consumers can be analyzed using prices, there are several short-comings in using this technique for goods with no or an insufficient market. This is especially true for 'natural streams'. The non-existence of market prices for goods or their parts does not mean that they do not have a value or that there is no preference structure for them. After an introductory discussion of ethical and value issues, specific methods for evaluating and analyzing the willingness-to-pay for natural streams and theirs restoration are developed further. Using direct interview techniques, locals in three different watersheds in Upper Austria are ask for their preferences and social pricing of natural streams and river management options. The areas the interviews were conducted in, represent a watershed dominated by intensive agricultural and residential uses, another watershed typical for a rural community and a third representing a watershed of a relatively pristine river of the Northern Alpine limestone range mainly used by forestry and tourism. Demographic data, eco-morphological stream characteristics and preferences of the interviewed about elements of a natural stream, user and non-user values were linked and analyzed. The results of a personal interviewing technique conducted in these watersheds showed to be capable to capture the preference structure in small watersheds and may offer some help for decision-making concerning river management issues. (author)

  1. Session-RPE Method for Training Load Monitoring: Validity, Ecological Usefulness, and Influencing Factors

    Directory of Open Access Journals (Sweden)

    Monoem Haddad

    2017-11-01

    Full Text Available Purpose: The aim of this review is to (1 retrieve all data validating the Session-rating of perceived exertion (RPE-method using various criteria, (2 highlight the rationale of this method and its ecological usefulness, and (3 describe factors that can alter RPE and users of this method should take into consideration.Method: Search engines such as SPORTDiscus, PubMed, and Google Scholar databases in the English language between 2001 and 2016 were consulted for the validity and usefulness of the session-RPE method. Studies were considered for further analysis when they used the session-RPE method proposed by Foster et al. in 2001. Participants were athletes of any gender, age, or level of competition. Studies using languages other than English were excluded in the analysis of the validity and reliability of the session-RPE method. Other studies were examined to explain the rationale of the session-RPE method and the origin of RPE.Results: A total of 950 studies cited the Foster et al. study that proposed the session RPE-method. 36 studies have examined the validity and reliability of this proposed method using the modified CR-10.Conclusion: These studies confirmed the validity and good reliability and internal consistency of session-RPE method in several sports and physical activities with men and women of different age categories (children, adolescents, and adults among various expertise levels. This method could be used as “standing alone” method for training load (TL monitoring purposes though some recommend to combine it with other physiological parameters as heart rate.

  2. The role played by social-ecological resilience as a method of integration in interdisciplinary research

    Directory of Open Access Journals (Sweden)

    Simone A. Beichler

    2014-09-01

    Full Text Available Today's multifaceted environmental problems, including climate change, necessitate interdisciplinary research. It is however difficult to combine disciplines to study such complex phenomena. We analyzed the experience we gained in applying a particular method of interdisciplinary integration, the 'bridging concept.' We outlined the entire process of developing, utilizing, and adapting social-ecological resilience as a bridging concept in a research project involving seven different disciplines. We focused on the tensions and opportunities arising from interdisciplinary dialogue and the understandings and manifestations of resilience in the disciplines involved. By evaluating the specific cognitive and social functions of resilience as a method of integration, we call for placing greater emphasis on the quality and value of the actual interdisciplinary process, rather than concentrating solely on the output of interdisciplinary work.

  3. Discussion on the method of environmental radiological impact assessment for the highway construction project

    International Nuclear Information System (INIS)

    Qiu Guohua

    2008-01-01

    Based on the characteristics and environmental radiological impact of the highway construction project, the basic procedure of environmental radiological impact assessment for the highway construction project is put forward, including analysis and determination of contamination sources, selection of evaluation factors, determination of assessment range and dose limit, environmental investigation, environmental impact prediction and assessment. The working method of each procedure is analyzed. (authors)

  4. An assessment of ecological and case-control methods for estimating lung cancer risk due to indoor radon

    International Nuclear Information System (INIS)

    Stidley, C.A.; Samet, J.M.

    1992-01-01

    Studies of underground miners indicate that indoor radon is an important cause of lung cancer. This finding has raised concern that exposure to radon also causes lung cancer in the general population. Epidemiological studies, including both case-control and ecological approaches, have directly addressed the risks of indoor residential radon; many more case-control studies are in progress. Ecological studies that associate lung-cancer rates with typical indoor radon levels in various geographic areas have not consistently shown positive associations. The results of purportedly negative ecological studies have been used as a basis for questioning the hazards of indoor radon exposure. Because of potentially serious methodologic flaws for testing hypotheses, we examined the ecological method as a tool for assessing lung-cancer risk from indoor radon exposure. We developed a simulation approach that utilizes the Environmental Protection Agency (EPA) radon survey data to assign exposures to individuals within counties. Using the computer-generated data, we compared risk estimates obtained by ecological regression methods with those obtained from other regression methods and with the open-quotes trueclose quotes risks used to generate the data. For many of these simulations, the ecological models, while fitting the summary data well, gave risk estimates that differed considerably from the true risks. For some models, the risk estimates were negatively correlated with exposure, although the assumed relationship was positive. Attempts to improve the ecological models by adding smoking variables, including interaction terms, did not always improve the estimates of risk, which are easily affected by model misspecification. Because exposure situations used in the simulations are realistic, our results show that ecological methods may not accurately estimate the lung-cancer risk associated with indoor radon exposure

  5. Cooling tower, construction method method therefor and precast prestressed concrete building units

    International Nuclear Information System (INIS)

    Lin, T.Y.; Yang, Y.C.

    1978-01-01

    A large, thin-shell cooling tower, a method for its erection, and novel precast units are described. Upon a foundation a series of angularly-extending columns is erected, and the columns are joined at their upper ends by a lower ring. Then a ribbed, waffle-like reinforced concrete wall is constructed to extend up from the lower ring and to provide a shell with a shape such as a hyperbolic paraboloid. The ribbed outer (or inner) surface strengthens the structure while enabling the thickness of the portions in between the ribs to be relatively thin. A series of vertically-spaced horizontal circumferential reinforcing bars or post-tensioning cables and a series of horizontally-spaced vertical or inclined bars or cables are included in the wall. The wall is preferably made up from a series of precast units that are of novel structure in themselves. At the top of the wall is an upper ring joining the various elements together

  6. Assessing the accuracy and stability of variable selection methods for random forest modeling in ecology.

    Science.gov (United States)

    Fox, Eric W; Hill, Ryan A; Leibowitz, Scott G; Olsen, Anthony R; Thornbrugh, Darren J; Weber, Marc H

    2017-07-01

    Random forest (RF) modeling has emerged as an important statistical learning method in ecology due to its exceptional predictive performance. However, for large and complex ecological data sets, there is limited guidance on variable selection methods for RF modeling. Typically, either a preselected set of predictor variables are used or stepwise procedures are employed which iteratively remove variables according to their importance measures. This paper investigates the application of variable selection methods to RF models for predicting probable biological stream condition. Our motivating data set consists of the good/poor condition of n = 1365 stream survey sites from the 2008/2009 National Rivers and Stream Assessment, and a large set (p = 212) of landscape features from the StreamCat data set as potential predictors. We compare two types of RF models: a full variable set model with all 212 predictors and a reduced variable set model selected using a backward elimination approach. We assess model accuracy using RF's internal out-of-bag estimate, and a cross-validation procedure with validation folds external to the variable selection process. We also assess the stability of the spatial predictions generated by the RF models to changes in the number of predictors and argue that model selection needs to consider both accuracy and stability. The results suggest that RF modeling is robust to the inclusion of many variables of moderate to low importance. We found no substantial improvement in cross-validated accuracy as a result of variable reduction. Moreover, the backward elimination procedure tended to select too few variables and exhibited numerous issues such as upwardly biased out-of-bag accuracy estimates and instabilities in the spatial predictions. We use simulations to further support and generalize results from the analysis of real data. A main purpose of this work is to elucidate issues of model selection bias and instability to ecologists interested in

  7. Computer-aided evaluation of waste disposal cavern construction methods. ISBN 3-9801713-0-2.

    International Nuclear Information System (INIS)

    Knissel, W.; Fahlbusch, M.

    1991-01-01

    The disposal of hazardous radioactive and toxic wastes in deep geological formations is considered the safest solution in many countries. The Federal Republic of Germany prefers salt formations for underground disposal on account of the special advantages of the rock salt. Calculation methods are presented for the mathematical description of mining techniques for the construction of waste disposal salt caverns. The developed calculation model allows one to evaluate different construction methods with regard to expenses and time. (orig./DG) [de

  8. A Novel Analysis Method for Paired-Sample Microbial Ecology Experiments.

    Science.gov (United States)

    Olesen, Scott W; Vora, Suhani; Techtmann, Stephen M; Fortney, Julian L; Bastidas-Oyanedel, Juan R; Rodríguez, Jorge; Hazen, Terry C; Alm, Eric J

    2016-01-01

    Many microbial ecology experiments use sequencing data to measure a community's response to an experimental treatment. In a common experimental design, two units, one control and one experimental, are sampled before and after the treatment is applied to the experimental unit. The four resulting samples contain information about the dynamics of organisms that respond to the treatment, but there are no analytical methods designed to extract exactly this type of information from this configuration of samples. Here we present an analytical method specifically designed to visualize and generate hypotheses about microbial community dynamics in experiments that have paired samples and few or no replicates. The method is based on the Poisson lognormal distribution, long studied in macroecology, which we found accurately models the abundance distribution of taxa counts from 16S rRNA surveys. To demonstrate the method's validity and potential, we analyzed an experiment that measured the effect of crude oil on ocean microbial communities in microcosm. Our method identified known oil degraders as well as two clades, Maricurvus and Rhodobacteraceae, that responded to amendment with oil but do not include known oil degraders. Our approach is sensitive to organisms that increased in abundance only in the experimental unit but less sensitive to organisms that increased in both control and experimental units, thus mitigating the role of "bottle effects".

  9. CLASSIFICATION AND COMPUTER SIMULATION OF CONSTRUCTIVE PROBLEM IN THE PLANE GEOMETRY: METHOD OF CIRCLES

    Directory of Open Access Journals (Sweden)

    Ivan H. Lenchuk

    2014-02-01

    Full Text Available Presented article concerns construction problems in plane geometry. Solved the problem of the formation of students' stereotypes efficient, economical in time visual representation of algorithms for solving problems on the modern computer screens. Used universal author’s method of fragmented typing tasks on the method of circles. Allocated rod-type problem with its subsequent filling with ingredients. Previously developed educational software (partially, GeoGebra ensure optimal realization of the construction. Their dynamic characteristics and constructive capabilities - quality visual- shaped stages of "evidence" and "research".

  10. On construction method of shipborne and airborne radar intelligence and related equipment knowledge graph

    Science.gov (United States)

    Hao, Ruizhe; Huang, Jian

    2017-08-01

    Knowledge graph construction in military intelligence domain is sprouting but technically immature. This paper presents a method to construct the heterogeneous knowledge graph in the field of shipborne and airborne radar and equipment. Based on the expert knowledge and the up-to-date Internet open source information, we construct the knowledge graph of radar characteristic information and the equipment respectively, and establish relationships between two graphs, providing the pipeline and method for the intelligence organization and management in the context of the crowding battlefields big data.

  11. Triadic (ecological, neural, cognitive) niche construction: a scenario of human brain evolution extrapolating tool use and language from the control of reaching actions.

    Science.gov (United States)

    Iriki, Atsushi; Taoka, Miki

    2012-01-12

    Hominin evolution has involved a continuous process of addition of new kinds of cognitive capacity, including those relating to manufacture and use of tools and to the establishment of linguistic faculties. The dramatic expansion of the brain that accompanied additions of new functional areas would have supported such continuous evolution. Extended brain functions would have driven rapid and drastic changes in the hominin ecological niche, which in turn demanded further brain resources to adapt to it. In this way, humans have constructed a novel niche in each of the ecological, cognitive and neural domains, whose interactions accelerated their individual evolution through a process of triadic niche construction. Human higher cognitive activity can therefore be viewed holistically as one component in a terrestrial ecosystem. The brain's functional characteristics seem to play a key role in this triadic interaction. We advance a speculative argument about the origins of its neurobiological mechanisms, as an extension (with wider scope) of the evolutionary principles of adaptive function in the animal nervous system. The brain mechanisms that subserve tool use may bridge the gap between gesture and language--the site of such integration seems to be the parietal and extending opercular cortices.

  12. Reliability of different mark-recapture methods for population size estimation tested against reference population sizes constructed from field data.

    Directory of Open Access Journals (Sweden)

    Annegret Grimm

    Full Text Available Reliable estimates of population size are fundamental in many ecological studies and biodiversity conservation. Selecting appropriate methods to estimate abundance is often very difficult, especially if data are scarce. Most studies concerning the reliability of different estimators used simulation data based on assumptions about capture variability that do not necessarily reflect conditions in natural populations. Here, we used data from an intensively studied closed population of the arboreal gecko Gehyra variegata to construct reference population sizes for assessing twelve different population size estimators in terms of bias, precision, accuracy, and their 95%-confidence intervals. Two of the reference populations reflect natural biological entities, whereas the other reference populations reflect artificial subsets of the population. Since individual heterogeneity was assumed, we tested modifications of the Lincoln-Petersen estimator, a set of models in programs MARK and CARE-2, and a truncated geometric distribution. Ranking of methods was similar across criteria. Models accounting for individual heterogeneity performed best in all assessment criteria. For populations from heterogeneous habitats without obvious covariates explaining individual heterogeneity, we recommend using the moment estimator or the interpolated jackknife estimator (both implemented in CAPTURE/MARK. If data for capture frequencies are substantial, we recommend the sample coverage or the estimating equation (both models implemented in CARE-2. Depending on the distribution of catchabilities, our proposed multiple Lincoln-Petersen and a truncated geometric distribution obtained comparably good results. The former usually resulted in a minimum population size and the latter can be recommended when there is a long tail of low capture probabilities. Models with covariates and mixture models performed poorly. Our approach identified suitable methods and extended options to

  13. Broad-scale assessments of ecological landscapes: developing methods and applications

    Science.gov (United States)

    Carr, Natasha B.; Wood, David J. A.; Bowen, Zachary H.; Haby, Travis S.

    2015-01-01

    The U.S. Department of the Interior (DOI) Bureau of Land Management (BLM) is developing a Landscape Approach for managing multiple uses of public lands by incorporating multiscale information to quantify the effects of natural and human influences on natural resource conditions and trends. A primary goal of the approach is to identify opportunities for resource conservation, restoration, and development. The BLM Landscape Approach is developing assessment methods that promote consistency in management decisions, identify ecological characteristics that promote ecosystem resilience under rapidly changing environmental conditions, and foster collaboration among land management agencies. The BLM Landscape Approach is closely aligned with the DOI’s “A Strategy for Improving the Mitigation Policies and Practices of The Department of the Interior.”

  14. [Comparison of the Wechsler Memory Scale-III and the Spain-Complutense Verbal Learning Test in acquired brain injury: construct validity and ecological validity].

    Science.gov (United States)

    Luna-Lario, P; Pena, J; Ojeda, N

    2017-04-16

    To perform an in-depth examination of the construct validity and the ecological validity of the Wechsler Memory Scale-III (WMS-III) and the Spain-Complutense Verbal Learning Test (TAVEC). The sample consists of 106 adults with acquired brain injury who were treated in the Area of Neuropsychology and Neuropsychiatry of the Complejo Hospitalario de Navarra and displayed memory deficit as the main sequela, measured by means of specific memory tests. The construct validity is determined by examining the tasks required in each test over the basic theoretical models, comparing the performance according to the parameters offered by the tests, contrasting the severity indices of each test and analysing their convergence. The external validity is explored through the correlation between the tests and by using regression models. According to the results obtained, both the WMS-III and the TAVEC have construct validity. The TAVEC is more sensitive and captures not only the deficits in mnemonic consolidation, but also in the executive functions involved in memory. The working memory index of the WMS-III is useful for predicting the return to work at two years after the acquired brain injury, but none of the instruments anticipates the disability and dependence at least six months after the injury. We reflect upon the construct validity of the tests and their insufficient capacity to predict functionality when the sequelae become chronic.

  15. Constructing Frozen Jacobian Iterative Methods for Solving Systems of Nonlinear Equations, Associated with ODEs and PDEs Using the Homotopy Method

    Directory of Open Access Journals (Sweden)

    Uswah Qasim

    2016-03-01

    Full Text Available A homotopy method is presented for the construction of frozen Jacobian iterative methods. The frozen Jacobian iterative methods are attractive because the inversion of the Jacobian is performed in terms of LUfactorization only once, for a single instance of the iterative method. We embedded parameters in the iterative methods with the help of the homotopy method: the values of the parameters are determined in such a way that a better convergence rate is achieved. The proposed homotopy technique is general and has the ability to construct different families of iterative methods, for solving weakly nonlinear systems of equations. Further iterative methods are also proposed for solving general systems of nonlinear equations.

  16. Construction Method of Display Proposal for Commodities in Sales Promotion by Genetic Algorithm

    Science.gov (United States)

    Yumoto, Masaki

    In a sales promotion task, wholesaler prepares and presents the display proposal for commodities in order to negotiate with retailer's buyers what commodities they should sell. For automating the sales promotion tasks, the proposal has to be constructed according to the target retailer's buyer. However, it is difficult to construct the proposal suitable for the target retail store because of too much combination of commodities. This paper proposes a construction method by Genetic algorithm (GA). The proposed method represents initial display proposals for commodities with genes, improve ones with the evaluation value by GA, and rearrange one with the highest evaluation value according to the classification of commodity. Through practical experiment, we can confirm that display proposal by the proposed method is similar with the one constructed by a wholesaler.

  17. ECOLOGICAL AND ECONOMIC SUBSTANTIATION OF SELECTION OF THE METHOD FOR PLASTIC WASTE MANAGEMENT

    Directory of Open Access Journals (Sweden)

    T. P. Shanina

    2015-11-01

    Full Text Available Analysis of the classifications of plastic waste from production and consumption is made by various criteria. Distinctive features of the specifi ed waste behavior under various treatment methods (deposition at landfill, incineration and recycling are discussed. Clustering of the polymeric waste by hazard categories of the combustion products is performed. The polyvinyl-chlorides and polycarbonates which generate the most hazardous products under  the combustion are singled out in a particular cluster. The qualitative and quantitative descrip- The qualitative and quantitative description of the plastic waste generated in Ukraine from 2011 to 2013 is provided. Grossemissions of the polyvinylchloride and polystyrene waste incineration products are calculated. Evaluation of the environmental damage resulting from implementation of various methods for plastic waste management is based on an environmental tax rate having a compensatory nature. Potential profit from selling the secondary raw materials, produced from plastic waste, is analysed. Ranking of the potential methods for plastic waste management is presented in the context of ecological and economic substantiation: the most preferable method is production of secondary raw materials (recycled resources; the least preferable one is incineration of the specified wastes.

  18. A Review of the Ecological Footprint Indicator—Perceptions and Methods

    Directory of Open Access Journals (Sweden)

    Thomas Wiedmann

    2010-06-01

    Full Text Available We present a comprehensive review of perceptions and methods around the Ecological Footprint (EF, based on a survey of more than 50 international EF stakeholders and a review of more than 150 original papers on EF methods and applications over the last decade. The key points identified in the survey are that the EF (a is seen as a strong communication tool, (b has a limited role within a policy context, (c is limited in scope, (d should be closer aligned to the UN System of Environmental and Economic Accounting and (e is most useful as part of a basket of indicators. Key issues from the review of methods are: (a none of the major methods identified can address all relevant issues and questions at once, (b basing bioproductivity calculations on Net Primary Production (NPP is a promising approach, (c advances in linking bioproductivity with ecosystem services and biodiversity have been made by the Dynamic EF concept and the HANPP indicator, (d environmentally extended input-output analysis (IOA provides a number of advantages for improving EF calculations and (e further variations such as the emergy-based concept or the inclusion of further pollutants are not regarded as providing a fundamental shift to the usefulness of EF for policy making. We also discuss the implications of our findings for the use of the EF as a headline indicator for sustainability decision-making.

  19. Investigation of the effects of construction and stage filling of reservoirs on the environment and ecology: Preproject baseline. [Missouri

    Science.gov (United States)

    Riggins, R. E. (Principal Investigator); Anderson, J. R.

    1977-01-01

    The author has identified the following significant results: (1) LANDSAT imagery can be used effectively as a baseline for detection of environmental change, resulting from construction of a major inland reservoir. (2) Forest cover can be observed adequately on two-band composite enlargements at a scale of 1:130,000. (3) Forest cover delineated on LANDSAT enlargements compares accurately with ground truth at a scale of 1:250,000. (4) A dual image mapping technique superimposing winter, summer, and spring scenes using the zoom transfer scope facilitates the determination. (5) The same technique can be used to detect changes in the project area, resulting from construction activities. (6) High altitude aircraft imagery can also be used to interpret changes in land use and forest type. (7) Construction operations can be more clearly detailed on the air photos than on LANDSAT imagery.

  20. Place and culture-based professional development: cross-hybrid learning and the construction of ecological mindfulness

    Science.gov (United States)

    Chinn, Pauline W. U.

    2015-03-01

    This paper approaches mindfulness, an awareness of internal and external realities, as a culturally-shaped habit of mind. Findings of a cross-cultural study and popular sayings that reflect America's cultural orientation to consumption and competition are contrasted with findings from Hawaiian language newspapers, traditional cultural practices, and Hawaiian sayings that indicate an orientation to ecological mindfulness that increased the resilience of fragile social ecosystems. Marginalization of indigenous culture, language, and knowledge and cultural differences between teachers and indigenous students are proposed as a contributing factor to lower science performance of Native Hawaiian students in mainstream schools. Two professional development projects designed to reduce conflicts between culture and science instruction are presented. Findings from these projects suggest alignment of science inquiry with indigenous cultural knowledge and practices oriented to sustainability supports the development of teachers' ecological mindfulness as indicated by increased awareness of, interest in, and incorporation of place and culture-based based resources into their instruction. Teacher feedback indicates that mapping technologies that enable teachers to visualize and integrate indigenous place-based Hawaiian knowledge with science inquiry are promising instructional strategies.

  1. Application of linear scheduling method (LSM) for nuclear power plant (NPP) construction

    International Nuclear Information System (INIS)

    Kim, Woojoong; Ryu, Dongsoo; Jung, Youngsoo

    2014-01-01

    Highlights: • Mixed use of linear scheduling method with traditional CPM is suggested for NPP. • A methodology for selecting promising areas for LSM application is proposed. • A case-study is conducted to validate the proposed LSM selection methodology. • A case-study of reducing NPP construction duration by using LSM is introduced. - Abstract: According to a forecast, global energy demand is expected to increase by 56% from 2010 to 2040 (EIA, 2013). The nuclear power plant construction market is also growing with sharper competition. In nuclear power plant construction, scheduling is one of the most important functions due to its large size and complexity. Therefore, it is crucial to incorporate the ‘distinct characteristics of construction commodities and the complex characteristics of scheduling techniques’ (Jung and Woo, 2004) when selecting appropriate schedule control methods for nuclear power plant construction. However, among various types of construction scheduling techniques, the traditional critical path method (CPM) has been used most frequently in real-world practice. In this context, the purpose of this paper is to examine the viability and effectiveness of linear scheduling method (LSM) applications for specific areas in nuclear power plant construction. In order to identify the criteria for selecting scheduling techniques, the characteristics of CPM and LSM were compared and analyzed first through a literature review. Distinct characteristics of nuclear power plant construction were then explored by using a case project in order to develop a methodology to select effective areas of LSM application to nuclear power plant construction. Finally, promising areas for actual LSM application are suggested based on the proposed evaluation criteria and the case project. Findings and practical implications are discussed for further implementation

  2. Application of linear scheduling method (LSM) for nuclear power plant (NPP) construction

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Woojoong, E-mail: minidung@nate.com [Central Research Institute, Korea Hydro and Nuclear Power Co., Ltd, Daejeon 305-343 (Korea, Republic of); Ryu, Dongsoo, E-mail: energyboy@khnp.co.kr [Central Research Institute, Korea Hydro and Nuclear Power Co., Ltd, Daejeon 305-343 (Korea, Republic of); Jung, Youngsoo, E-mail: yjung97@mju.ac.kr [College of Architecture, Myongji University, Yongin 449-728 (Korea, Republic of)

    2014-04-01

    Highlights: • Mixed use of linear scheduling method with traditional CPM is suggested for NPP. • A methodology for selecting promising areas for LSM application is proposed. • A case-study is conducted to validate the proposed LSM selection methodology. • A case-study of reducing NPP construction duration by using LSM is introduced. - Abstract: According to a forecast, global energy demand is expected to increase by 56% from 2010 to 2040 (EIA, 2013). The nuclear power plant construction market is also growing with sharper competition. In nuclear power plant construction, scheduling is one of the most important functions due to its large size and complexity. Therefore, it is crucial to incorporate the ‘distinct characteristics of construction commodities and the complex characteristics of scheduling techniques’ (Jung and Woo, 2004) when selecting appropriate schedule control methods for nuclear power plant construction. However, among various types of construction scheduling techniques, the traditional critical path method (CPM) has been used most frequently in real-world practice. In this context, the purpose of this paper is to examine the viability and effectiveness of linear scheduling method (LSM) applications for specific areas in nuclear power plant construction. In order to identify the criteria for selecting scheduling techniques, the characteristics of CPM and LSM were compared and analyzed first through a literature review. Distinct characteristics of nuclear power plant construction were then explored by using a case project in order to develop a methodology to select effective areas of LSM application to nuclear power plant construction. Finally, promising areas for actual LSM application are suggested based on the proposed evaluation criteria and the case project. Findings and practical implications are discussed for further implementation.

  3. PhyloChip™ microarray comparison of sampling methods used for coral microbial ecology

    Science.gov (United States)

    Kellogg, Christina A.; Piceno, Yvette M.; Tom, Lauren M.; DeSantis, Todd Z.; Zawada, David G.; Andersen, Gary L.

    2012-01-01

    Interest in coral microbial ecology has been increasing steadily over the last decade, yet standardized methods of sample collection still have not been defined. Two methods were compared for their ability to sample coral-associated microbial communities: tissue punches and foam swabs, the latter being less invasive and preferred by reef managers. Four colonies of star coral, Montastraea annularis, were sampled in the Dry Tortugas National Park (two healthy and two with white plague disease). The PhyloChip™ G3 microarray was used to assess microbial community structure of amplified 16S rRNA gene sequences. Samples clustered based on methodology rather than coral colony. Punch samples from healthy and diseased corals were distinct. All swab samples clustered closely together with the seawater control and did not group according to the health state of the corals. Although more microbial taxa were detected by the swab method, there is a much larger overlap between the water control and swab samples than punch samples, suggesting some of the additional diversity is due to contamination from water absorbed by the swab. While swabs are useful for noninvasive studies of the coral surface mucus layer, these results show that they are not optimal for studies of coral disease.

  4. Constructing Narrative Ecologies as a Site for Teachers' Professional Learning with New Technologies and Media in Primary Education

    Science.gov (United States)

    Turvey, Keith

    2012-01-01

    This article argues that to understand how new technologies and media can become co-agents in the process of pedagogical change, we first need to understand teachers' complex relationship with new technologies and media in both their personal and their professional lives. A conceptual framework is delineated for constructing a complex narrative…

  5. Environmental Impacts and Embodied Energy of Construction Methods and Materials in Low-Income Tropical Housing

    Directory of Open Access Journals (Sweden)

    Arman Hashemi

    2015-06-01

    Full Text Available This paper evaluates the current conditions of Ugandan low-income tropical housing with a focus on construction methods and materials in order to identify the key areas for improvement. Literature review, site visits and photographic surveys are carried out to collect relevant information on prevailing construction methods/materials and on their environmental impacts in rural areas. Low quality, high waste, and energy intensive production methods, as well as excessive soil extraction and deforestation, are identified as the main environmental damage of the current construction methods and materials. The embodied energy is highlighted as the key area which should be addressed to reduce the CO2 emissions of low-income tropical housing. The results indicate that the embodied energy of fired bricks in Uganda is up to 5.7 times more than general clay bricks. Concrete walling is identified as a much more environmentally friendly construction method compared to brick walling in East African countries. Improving fuel efficiency and moulding systems, increasing access to renewable energy sources, raising public awareness, educating local manufacturers and artisans, and gradual long-term introduction of innovative construction methods and materials which are adapted to local needs and conditions are some of the recommended actions to improve the current conditions.

  6. A Multistep Extending Truncation Method towards Model Construction of Infinite-State Markov Chains

    Directory of Open Access Journals (Sweden)

    Kemin Wang

    2014-01-01

    Full Text Available The model checking of Infinite-State Continuous Time Markov Chains will inevitably encounter the state explosion problem when constructing the CTMCs model; our method is to get a truncated model of the infinite one; to get a sufficient truncated model to meet the model checking of Continuous Stochastic Logic based system properties, we propose a multistep extending advanced truncation method towards model construction of CTMCs and implement it in the INFAMY model checker; the experiment results show that our method is effective.

  7. Fuzzy decision approach for selection of most suitable construction method of Green Buildings

    OpenAIRE

    Sunita Bansal; Srijit Biswas; S.K. Singh

    2017-01-01

    A big challenge in sustainable projects is selection of appropriate construction method and is considered to be the decisive factor for its success. Many environment friendly prefabricated elements are entering into the market at an increasing pace. This has increased the workload and inquisitiveness of the stakeholders who will need information about their environmental, technical and esthetic aspects. The use of prefabrication in sustainable construction is advantageous but appropriate deci...

  8. Method for the construction of a nuclear reactor with a prestressed concrete pressure vessel

    International Nuclear Information System (INIS)

    Schoening, J.; Schwiers, H.G.

    1981-01-01

    Method for the construction of nuclear reactors with prestressed concrete pressure vessel, providing during the initial stage of construction of the prestressed concrete pressure vessel a support structure around the liner. This enables an early mounting of core components in clean conditions as well as load reductions for final concreting in layers of the prestressed concrete pressure vessel. By applying the support structure, the overall assembly time of these nuclear power plant is considerably reduced without extra cost. (orig.) [de

  9. 13 CFR 305.6 - Allowable methods of procurement for construction services.

    Science.gov (United States)

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Allowable methods of procurement for construction services. 305.6 Section 305.6 Business Credit and Assistance ECONOMIC DEVELOPMENT... advertisement for bids and shall include the following, as applicable: (1) Justification for the proposed method...

  10. Monolithic Concrete vs Precast Concrete for the Construction of Bridge by Th Cantilever Method

    Directory of Open Access Journals (Sweden)

    Morlova Dumitru Daniel

    2015-07-01

    Full Text Available In the article "Monolithic Concrete vs Precast Concrete for the Construction of Bridges by the Cantilever Method", there are approached a number of issues that come out in the design and execution of prestressed concrete bridge structures using the cantilever method.

  11. Evaluation of a new method for assessing resilience in urban aquatic social-ecological systems

    Directory of Open Access Journals (Sweden)

    Jonathan P. Moores

    2017-12-01

    Full Text Available Urban aquatic social-ecological systems (SESs comprise socio-technical elements, the built environment and its management, and natural elements (water bodies that provide ecosystem services. Changed hydrology, poor stormwater quality, and the modification of water bodies associated with urban development brings challenges for maintaining ecosystem services provision in an urban aquatic SES. Water sensitive urban design (WSUD has emerged as a form of development that aims to better support the provision of ecosystem services. Resilience concepts provide a basis for discriminating between WSUD and conventional development approaches. Building on an existing decision support system, a new, preliminary method for assessing resilience based on the combination of the socio-technical capacity (STC and natural capacity (NC of urban aquatic SESs has been developed. The STC score reflects a multicriteria assessment of the characteristics of stormwater infrastructure and management. The NC score reflects an assessment of the state and trajectory of biophysical attributes of the system associated with the provision of ecosystem services. By modeling a series of future urban development scenarios in Auckland, New Zealand, the method has been shown to discriminate between scenario outcomes within constraints associated with the biophysical and built characteristics modeled. Results are consistent with key concepts of resilience theory: outcomes are grouped in regimes and exhibit hysteresis, with the ability of WSUD to improve the state of the system strongly influenced by the presence of legacy effects. The method provides a source of additional, valuable information that complements other indicators by providing a snapshot of the interaction of catchment management effort and outcomes and indicating the likely future state of the SES. Recognizing that the method is limited to providing a relative assessment of resilience and adopts certain simplistic

  12. Evaluation of gene association methods for coexpression network construction and biological knowledge discovery.

    Directory of Open Access Journals (Sweden)

    Sapna Kumari

    Full Text Available BACKGROUND: Constructing coexpression networks and performing network analysis using large-scale gene expression data sets is an effective way to uncover new biological knowledge; however, the methods used for gene association in constructing these coexpression networks have not been thoroughly evaluated. Since different methods lead to structurally different coexpression networks and provide different information, selecting the optimal gene association method is critical. METHODS AND RESULTS: In this study, we compared eight gene association methods - Spearman rank correlation, Weighted Rank Correlation, Kendall, Hoeffding's D measure, Theil-Sen, Rank Theil-Sen, Distance Covariance, and Pearson - and focused on their true knowledge discovery rates in associating pathway genes and construction coordination networks of regulatory genes. We also examined the behaviors of different methods to microarray data with different properties, and whether the biological processes affect the efficiency of different methods. CONCLUSIONS: We found that the Spearman, Hoeffding and Kendall methods are effective in identifying coexpressed pathway genes, whereas the Theil-sen, Rank Theil-Sen, Spearman, and Weighted Rank methods perform well in identifying coordinated transcription factors that control the same biological processes and traits. Surprisingly, the widely used Pearson method is generally less efficient, and so is the Distance Covariance method that can find gene pairs of multiple relationships. Some analyses we did clearly show Pearson and Distance Covariance methods have distinct behaviors as compared to all other six methods. The efficiencies of different methods vary with the data properties to some degree and are largely contingent upon the biological processes, which necessitates the pre-analysis to identify the best performing method for gene association and coexpression network construction.

  13. A construction method of reinforced-concrete very high stacks and natural draft cooling towers

    International Nuclear Information System (INIS)

    Miyamoto, Takao; Hosokawa, Osamu

    1978-01-01

    The new Shimizu flex-lip system was developed by the Shimizu Construction Co., Ltd. for constructing very high (about 200 m) towers made of reinforced concrete. Utilizing this system, towers of any shape, circular, triangular, square and polygonal, can be constructed. The wall thickness can be varied from 200 mm to 1 m. The diameter of towers can be enlarged from 3 m to any valve and the inclination of tower walls can be designed in any way between +1/5 and -1/5. The advantage of this system is to use the jack down mechanism, to test concrete strength without sampling, to reduce the connections of reinforcing steel bars and to adopt the continuous, and to use automatic measuring system using laser for checking up positional error. The design and analysis of high tower structures were systemized and automated with the development of the flex-lip construction method. The several past records of having applied this method to industrial areas are shown. As for natural draft cooling towers, the Shimizu jump-up system has been studied for the cooling water capacity of 60,000 m 3 /h. The towers are 120 m high, 110 m in diameter at the bottom and 65 m in diameter at the top. The advantage of this construction method, the plan of concrete jump-up and the construction test are explained. (Nakai, Y.)

  14. Rethinking environmental leadership: The social construction of leaders and leadership in discourses of ecological crisis, development and conservation

    OpenAIRE

    Case, P.; Evans, L.; Fabinyi, M.; Cohen, P.; Hicks, C.; Prideaux, M.; Mills, D.

    2015-01-01

    Leadership is heralded as being critical to addressing the ‘crisis of governance’ facing the Earth’s natural systems. While political, economic and corporate discourses of leadership have been widely and critically interrogated, narratives of environmental leadership remain relatively neglected in the academic literature. The aims of this paper are twofold. Firstly, to highlight the centrality and importance of environmental science’s construction and mobilization of leadership discourse. Sec...

  15. A Comparison of Affect Ratings Obtained with Ecological Momentary Assessment and the Day Reconstruction Method

    Science.gov (United States)

    Dockray, Samantha; Grant, Nina; Stone, Arthur A.; Kahneman, Daniel; Wardle, Jane

    2010-01-01

    Measurement of affective states in everyday life is of fundamental importance in many types of quality of life, health, and psychological research. Ecological momentary assessment (EMA) is the recognized method of choice, but the respondent burden can be high. The day reconstruction method (DRM) was developed by Kahneman and colleagues (Science, 2004, 306, 1776–1780) to assess affect, activities and time use in everyday life. We sought to validate DRM affect ratings by comparison with contemporaneous EMA ratings in a sample of 94 working women monitored over work and leisure days. Six EMA ratings of happiness, tiredness, stress, and anger/frustration were obtained over each 24 h period, and were compared with DRM ratings for the same hour, recorded retrospectively at the end of the day. Similar profiles of affect intensity were recorded with the two techniques. The between-person correlations adjusted for attenuation ranged from 0.58 (stress, working day) to 0.90 (happiness, leisure day). The strength of associations was not related to age, educational attainment, or depressed mood. We conclude that the DRM provides reasonably reliable estimates both of the intensity of affect and variations in affect over the day, so is a valuable instrument for the measurement of everyday experience in health and social research. PMID:21113328

  16. Non-destructive Inspection of Top-Down Construction Joints of Column in SRC Structure using Ultrasonic Method

    International Nuclear Information System (INIS)

    Park, Seok Kyun; Baek, Un Chan; Lee, Han Bum; Kim, Myoung Mo

    2000-01-01

    The joint treatment of concrete is one of the technical problems in top down construction method. Joints created with the top down construction result in serious weakness from the aspects of both structural and water-barrier function. Ultrasonic method was used for the inspection of top down construction joints of a various column in SRC structure in this study. The advantages and limitations of this method for non-destructive inspection in top down construction joints are investigated. As a result, it has been verified that the semi-direct measurement method is more effective than the other methods for detecting the voids of construction joints using ultrasonic method

  17. On the effectiveness in implementing a waste-management-plan method in construction

    International Nuclear Information System (INIS)

    Tam, Vivian W.Y.

    2008-01-01

    The increasing awareness of waste management concerns from construction and demolition waste has led to the development of waste management as an important function of construction project management. The Hong Kong government started employing the implementation of a waste-management-plan (WMP) method for all construction projects in 2003. During the trial period, the government received different version of feedback from the industry. It also came out that detailed descriptions of waste management procedures in the WMP method largely affect the productivity of companies. This paper investigates the effectiveness of the existing implementation of the WMP method in the Hong Kong construction industry. A questionnaire survey and structured interviews were conducted. The result showed that 'Propose methods for on-site reuse of materials' and 'Propose methods for reducing waste' are the main benefits gained from the implementation of the WMP method. However, 'Low financial incentive' and 'Increase in overhead cost' are considered as the major difficulties in the implementation. From that, 'Use of prefabricated building components' is considered as the major effective measure to encourage the implementation of the WMP method

  18. Do sampling methods differ in their utility for ecological monitoring? Comparison of line-point intercept, grid-point intercept, and ocular estimate methods

    Science.gov (United States)

    This study compared the utility of three sampling methods for ecological monitoring based on: interchangeability of data (rank correlations), precision (coefficient of variation), cost (minutes/transect), and potential of each method to generate multiple indicators. Species richness and foliar cover...

  19. The methodic of calculation for the need of basic construction machines on construction site when developing organizational and technological documentation

    Science.gov (United States)

    Zhadanovsky, Boris; Sinenko, Sergey

    2018-03-01

    Economic indicators of construction work, particularly in high-rise construction, are directly related to the choice of optimal number of machines. The shortage of machinery makes it impossible to complete the construction & installation work on scheduled time. Rates of performance of construction & installation works and labor productivity during high-rise construction largely depend on the degree of provision of construction project with machines (level of work mechanization). During calculation of the need for machines in construction projects, it is necessary to ensure that work is completed on scheduled time, increased level of complex mechanization, increased productivity and reduction of manual work, and improved usage and maintenance of machine fleet. The selection of machines and determination of their numbers should be carried out by using formulas presented in this work.

  20. A Novel Evaluation Method for Building Construction Project Based on Integrated Information Entropy with Reliability Theory

    Directory of Open Access Journals (Sweden)

    Xiao-ping Bai

    2013-01-01

    Full Text Available Selecting construction schemes of the building engineering project is a complex multiobjective optimization decision process, in which many indexes need to be selected to find the optimum scheme. Aiming at this problem, this paper selects cost, progress, quality, and safety as the four first-order evaluation indexes, uses the quantitative method for the cost index, uses integrated qualitative and quantitative methodologies for progress, quality, and safety indexes, and integrates engineering economics, reliability theories, and information entropy theory to present a new evaluation method for building construction project. Combined with a practical case, this paper also presents detailed computing processes and steps, including selecting all order indexes, establishing the index matrix, computing score values of all order indexes, computing the synthesis score, sorting all selected schemes, and making analysis and decision. Presented method can offer valuable references for risk computing of building construction projects.

  1. A novel evaluation method for building construction project based on integrated information entropy with reliability theory.

    Science.gov (United States)

    Bai, Xiao-ping; Zhang, Xi-wei

    2013-01-01

    Selecting construction schemes of the building engineering project is a complex multiobjective optimization decision process, in which many indexes need to be selected to find the optimum scheme. Aiming at this problem, this paper selects cost, progress, quality, and safety as the four first-order evaluation indexes, uses the quantitative method for the cost index, uses integrated qualitative and quantitative methodologies for progress, quality, and safety indexes, and integrates engineering economics, reliability theories, and information entropy theory to present a new evaluation method for building construction project. Combined with a practical case, this paper also presents detailed computing processes and steps, including selecting all order indexes, establishing the index matrix, computing score values of all order indexes, computing the synthesis score, sorting all selected schemes, and making analysis and decision. Presented method can offer valuable references for risk computing of building construction projects.

  2. A Survey of a System of Methods for Fire Safety Design of Traditional Concrete Constructions

    DEFF Research Database (Denmark)

    Hertz, Kristian

    2000-01-01

    constructions DS411. And the bases for many of the methods have been distributed by CIB W14 reports. But a survey of all the methods in coherence has never been presented, and much of this documentation and the additional documentation produced for the work with the codes needs still to be printed in papers......During the years since 1978 the author has been developing a series of calculation methods and sup-porting test methods for the fire safety design of concrete constructions. The basic methods have been adopted in the fire chapters of the Eurocode ENV1992-1-2 and the Danish code for concrete.......It is the aim of this paper to give a coherent presentation of the design methods, their degree of documentation and the available references in order to facilitate the application of them....

  3. Effective method for construction of low-dimensional models for heat transfer process

    Energy Technology Data Exchange (ETDEWEB)

    Blinov, D.G.; Prokopov, V.G.; Sherenkovskii, Y.V.; Fialko, N.M.; Yurchuk, V.L. [National Academy of Sciences of Ukraine, Kiev (Ukraine). Inst. of Engineering Thermophysics

    2004-12-01

    A low-dimensional model based on the method of proper orthogonal decomposition (POD) and the method of polyargumental systems (MPS) for thermal conductivity problems with strongly localized source of heat has been presented. The key aspect of these methods is that they enable to avoid weak points of other projection methods, which consists in a priori choice of basis functions. It enables us to use the MPS method and the POD method as convenient means to construct low-dimensional models of heat and mass transfer problems. (Author)

  4. An improved method for evaluating ecological suitability of hydropower development by considering water footprint and transportation connectivity in Tibet, China.

    Science.gov (United States)

    Cui, Guannan; Wang, Xuan; Xu, Linyu; Zhang, Jin; Yu, Bing

    2014-01-01

    Ecological suitability evaluation for hydropower development is effective in locating the most suitable area for construction and emphasizes a clear direction for water resources governance. In this paper, water footprints and transportation connectivity were introduced to improve the existing ecological suitability evaluation application for hydropower development by revising the defects of the traditional indicator system. The following conclusions were reached. (1) Tibet was in a state of water use surplus; the prospect of further hydropower development is positive. (2) Chamdo, Lhasa and Nyingchi excelled in water use efficiency, and Ali was placed last. Nakchu was slightly superior to Ali, but it lagged behind the southern regions. Lhasa, Chamdo, Nyingchi, Xigaze and Shannan were suitable for hydropower development, which could further meet local needs and benefit other regions of China. (3) The evaluation results were in accordance with the actual eco-environmental conditions of the built hydropower projects, indicating that current hydropower development planning was basically reasonable.

  5. Method of constructing lower dry well access tunnel for nuclear reactor container

    International Nuclear Information System (INIS)

    Kume, Tadashi; Furukawa, Hedeyasu.

    1993-01-01

    The method of the present invention facilitates construction of a lower dry well access tunnel for a nuclear reactor container. The lower dry well access tunnel is constructed across the reactor container and the reactor main body foundation. In this case, the lower dry well access tunnel is divided into three sections, i.e., axial end portions and a central portion. At first, each of the end portions is attached to the walls of the reactor container and the reactor main body foundation respectively. Subsequently, the central portion is attached to each of the end portions. An adjusting margin is previously provided to the central portion upon manufacturing each of the sections for adjusting deviation from a nominal size upon construction. In such a construction method, it is possible to eliminate interference accident during construction between the end portions of the lower dry well access tunnel and the reactor container and the reactor main body foundation, to facilitate the construction. Further, this facilitates the fabricating operation for dimensional alignment between the lower dry well access tunnel, and the reactor container and the reactor main body foundation. (I.S.)

  6. THE EFFECT OF EXCHANGE RATE ON THE CONSTRUCTION PROJECTS AND PROTECTION METHODS

    Directory of Open Access Journals (Sweden)

    Handan AKSUYEK,

    2017-02-01

    Full Text Available As with all sectors, recent extreme changes occurred in the exchange rates have substantially affected the construction operations. While the rise in foreign exchange rates leads to harmful effects in the negative direction at the operations having foreign exchange – based debt or it provides also advantageous effect in the positive direction at the construction companies having foreign exchange – indexed investments. In this context, this sudden change in foreign exchange rates which cannot be predicted beforehand and emerges as a result of speculative events. As with all operations carrying out foreign exchange – based tasks, these fluctuations in the foreign exchange rate head first among the factors which affect the achievement or failure of the cost or profit targets previously determined by the construction companies as well. Therefore, the companies whose costs and profits consist of different units of currency in their construction agreements should apply to the hedging methods in order to be protected against the exchange rate. As for the main tools of protection method are the derivative products such as forward, futures, swap and optional contracts. In this study, the effect of exchange rate fluctuations on the completion costs of construction projects is scrutinized. Moreover, the tools which may be employed by the construction companies in order to get rid of exchange rate which adversely influence the building companies in both directions have been comparatively evaluated.

  7. Asymptotic Method of Solution for a Problem of Construction of Optimal Gas-Lift Process Modes

    Directory of Open Access Journals (Sweden)

    Fikrat A. Aliev

    2010-01-01

    Full Text Available Mathematical model in oil extraction by gas-lift method for the case when the reciprocal value of well's depth represents a small parameter is considered. Problem of optimal mode construction (i.e., construction of optimal program trajectories and controls is reduced to the linear-quadratic optimal control problem with a small parameter. Analytic formulae for determining the solutions at the first-order approximation with respect to the small parameter are obtained. Comparison of the obtained results with known ones on a specific example is provided, which makes it, in particular, possible to use obtained results in realizations of oil extraction problems by gas-lift method.

  8. Technological aspects of lift-slab method in high-rise-building construction.

    Science.gov (United States)

    Gaidukov, Pavel V.; Pugach, Evgeny M.

    2018-03-01

    The utilization efficiency of slab lifting technology for high-rise-building construction is regarded in the present article. The main problem of the article is organizing technology abilities indication, which proves the method application possibility. There is the comparing of lifting technologies and sequential concrete-frame extension, as follows: the first one: the parameters are defined, and the second one: the organizational model is executed. This model defines borders of the usage methods, as well. There is the mathematic model creating, which describes boundary conditions of the present technologies usage. This model allows to predict construction efficiency for different stored-number buildings.

  9. A quantitative method for zoning of protected areas and its spatial ecological implications.

    Science.gov (United States)

    Del Carmen Sabatini, María; Verdiell, Adriana; Rodríguez Iglesias, Ricardo M; Vidal, Marta

    2007-04-01

    Zoning is a key prescriptive tool for administration and management of protected areas. However, the lack of zoning is common for most protected areas in developing countries and, as a consequence, many protected areas are not effective in achieving the goals for which they were created. In this work, we introduce a quantitative method to expeditiously zone protected areas and we evaluate its ecological implications on hypothetical zoning cases. A real-world application is reported for the Talampaya National Park, a UNESCO World Heritage Site located in Argentina. Our method is a modification of the zoning forest model developed by Bos [Bos, J., 1993. Zoning in forest management: a quadratic assignment problem solved by simulated annealing. Journal of Environmental Management 37, 127-145.]. Main innovations involve a quadratic function of distance between land units, non-reciprocal weights for adjacent land uses (mathematically represented by a non-symmetric matrix), and the possibility of imposing a connectivity constraint. Due to its intrinsic spatial dimension, the zoning problem belongs to the NP-hard class, i.e. a solution can only be obtained in non-polynomial time [Nemhausser, G., Wolsey, L., 1988. Integer and Combinatorial Optimization. John Wiley, New York.]. For that purpose, we applied a simulated annealing heuristic implemented as a FORTRAN language routine. Our innovations were effective in achieving zoning designs more compatible with biological diversity protection. The quadratic distance term facilitated the delineation of core zones for elements of significance; the connectivity constraint minimized fragmentation; non-reciprocal land use weightings contributed to better representing management decisions, and influenced mainly the edge and shape of zones. This quantitative method can assist the zoning process within protected areas by offering many zonation scheme alternatives with minimum cost, time and effort. This ability provides a new tool to

  10. The Participatory Construction of Agro-Ecological Knowledge As A Soil Conservation Strategy In The Mountain Region of Rio de Janeiro State (Brazil

    Directory of Open Access Journals (Sweden)

    de Assis Renato Linhares

    2018-02-01

    Full Text Available Agriculture in the mountain region of Rio de Janeiro State is characterized by intensive soil use and input. Such mountainous environments are vulnerable to climate events; thus, the current article presents a report on methods applied to exchange academic and traditional knowledge. The aim is to expand farmers’ perception about the need of implementing agro-ecological practices, mainly soil management practices, which are important for agricultural sustainability in mountainous environments. The study was conducted in a Nova Friburgo family production unit, in the mountain region of Rio de Janeiro State (Brazil. It consisted of implementing three observation and soil organic-matter management units. The idea was to reduce the incidence of clubroot of crucifers disease caused by Plasmidiophora brassicae. The soil fauna was discussed with local farmers, with emphasis on the association between ecological processes and soil management. The present study improved the discussion with farmers and the need of introducing other innovative conservation practices such as no-tillage system and participatory research based on agro-ecological propositions.

  11. The co-constructing stories method : feedback of designers on use of the method in real design cases

    NARCIS (Netherlands)

    Buskermolen, D.; Terken, J.M.B.; Eggen, J.H.

    2015-01-01

    In this paper we present the "Co-constructing Stories" method, aiming to elicit feedback from end-users on novel design concepts in the early phases of the design process. In sessions of less than an hour, participants are prompted by a storyboard depicting the current situation to recollect

  12. Predicting community structure in snakes on Eastern Nearctic islands using ecological neutral theory and phylogenetic methods.

    Science.gov (United States)

    Burbrink, Frank T; McKelvy, Alexander D; Pyron, R Alexander; Myers, Edward A

    2015-11-22

    Predicting species presence and richness on islands is important for understanding the origins of communities and how likely it is that species will disperse and resist extinction. The equilibrium theory of island biogeography (ETIB) and, as a simple model of sampling abundances, the unified neutral theory of biodiversity (UNTB), predict that in situations where mainland to island migration is high, species-abundance relationships explain the presence of taxa on islands. Thus, more abundant mainland species should have a higher probability of occurring on adjacent islands. In contrast to UNTB, if certain groups have traits that permit them to disperse to islands better than other taxa, then phylogeny may be more predictive of which taxa will occur on islands. Taking surveys of 54 island snake communities in the Eastern Nearctic along with mainland communities that have abundance data for each species, we use phylogenetic assembly methods and UNTB estimates to predict island communities. Species richness is predicted by island area, whereas turnover from the mainland to island communities is random with respect to phylogeny. Community structure appears to be ecologically neutral and abundance on the mainland is the best predictor of presence on islands. With regard to young and proximate islands, where allopatric or cladogenetic speciation is not a factor, we find that simple neutral models following UNTB and ETIB predict the structure of island communities. © 2015 The Author(s).

  13. Experimental study on joint construction method for aseismatic walls of reactor buildings, (1)

    International Nuclear Information System (INIS)

    Sugita, Kazunao; Mogami, Tatsuo; Ezaki, Tetsuro

    1987-01-01

    On the aseismatic walls of a reactor auxiliary building, many temporary openings are provided at the time of the construction for carrying equipment in later, due to the demand of shortening the construction period. Thus on the aseismatic walls, in most cases there are the joints due to the concrete placed later. As equipment tends to be unitized and become large, the quipment is placed close to the wall having an opening, consequently, the workability is poor, and the standardization of construction method is urgently demanded. The conventional method of closing temporary openings has the problems of safety and connecting reinforcing bars, therefore, the new construction method was proposed. In reactor buildings, the joints of walls are unavoidable, and since those are large scale structures, the joints are numerous. Therefore, at the joint parts, it abandoned and buried frames are used, it is advantageous in the time and cost of joint construction. In both cases, the mechanical properties were confirmed by the fundamental performance test partially modeling the joints and the verifying test modeling the whole walls. In this paper, the test of applying only shearing force to joint models is reported. (Kako, I.)

  14. Constructing inverse probability weights for continuous exposures: a comparison of methods.

    Science.gov (United States)

    Naimi, Ashley I; Moodie, Erica E M; Auger, Nathalie; Kaufman, Jay S

    2014-03-01

    Inverse probability-weighted marginal structural models with binary exposures are common in epidemiology. Constructing inverse probability weights for a continuous exposure can be complicated by the presence of outliers, and the need to identify a parametric form for the exposure and account for nonconstant exposure variance. We explored the performance of various methods to construct inverse probability weights for continuous exposures using Monte Carlo simulation. We generated two continuous exposures and binary outcomes using data sampled from a large empirical cohort. The first exposure followed a normal distribution with homoscedastic variance. The second exposure followed a contaminated Poisson distribution, with heteroscedastic variance equal to the conditional mean. We assessed six methods to construct inverse probability weights using: a normal distribution, a normal distribution with heteroscedastic variance, a truncated normal distribution with heteroscedastic variance, a gamma distribution, a t distribution (1, 3, and 5 degrees of freedom), and a quantile binning approach (based on 10, 15, and 20 exposure categories). We estimated the marginal odds ratio for a single-unit increase in each simulated exposure in a regression model weighted by the inverse probability weights constructed using each approach, and then computed the bias and mean squared error for each method. For the homoscedastic exposure, the standard normal, gamma, and quantile binning approaches performed best. For the heteroscedastic exposure, the quantile binning, gamma, and heteroscedastic normal approaches performed best. Our results suggest that the quantile binning approach is a simple and versatile way to construct inverse probability weights for continuous exposures.

  15. A working definition of scenario and a method of scenario construction

    International Nuclear Information System (INIS)

    Barr, G.E.; Dunn, E.

    1992-01-01

    The event-tree method of scenario construction has been chosen for the Yucca Mountain performance assessment. Its applicability and suitability to the problem are discussed and compared with those of the Nuclear Regulatory Commission (NRC) method. The event-tree method is appropriate for an incompletely characterized site, where there must be an evolving understanding, over time, of the processes at work, for a site that may require analysis of details in specific context, and when the scenario functions to guide site characterization. Anticipating the eventual requirement for using the NRC method, we show that the event-tree method can be translated to the NRC format after final scenario screening

  16. Habitat characterization of the Tortugas Ecological Reserve south using photographic and quadrat methods

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — We supply habitat characterization data along a single randomly oriented transect at each of 16 sampling stations in the Tortugas South Ecological Reserve. This...

  17. Ecological profiles of caddisfly larvae in Mediterranean streams: implications for bioassessment methods

    International Nuclear Information System (INIS)

    Bonada, N.; Zamora-Munoz, C.; Rieradevall, M.; Prat, N.

    2004-01-01

    Caddisflies are a well represented group with high species diversity in Mediterranean climate rivers. Although they are widely used in water quality assessment, little is known of the ecological profiles of families or species. We present a simple score for ecological profiles which measures intolerance to water quality. The ecological profiles of caddisflies are diverse and the degree of tolerance at the family level is related to species diversity and the tolerance of individual species to water quality. Comparisons with the scores used in the biotic index IBMWP show general agreement between the degree of intolerance of a family and its score in the IBMWP, with few exceptions. Studies on tolerance are required to elucidate the autecology of taxa, and to develop biological indices, especially in areas with high species diversity. - Capsule: Ecological profiles of caddisfly larvae in Mediterranean streams using water quality variables

  18. Habitat characterization of the Tortugas Ecological Reserve south using photographic and quadrat methods.

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — We supply habitat characterization data along a single randomly oriented transect at each of 16 sampling stations in the Tortugas South Ecological Reserve. This...

  19. [Progress and prospects on evaluation of ecological restoration: a review of the 5th World Conference on Ecological Restoration].

    Science.gov (United States)

    Ding, Jing-Yi; Zhao, Wen-Wu

    2014-09-01

    The 5th World Conference on Ecological Restoration was held in Madison, Wisconsin, USA on October 6-11, 2013. About 1200 delegates from more than 50 countries attended the conference, and discussed the latest developments in different thematic areas of ecological restoration. Discussions on evaluation of ecological restoration were mainly from three aspects: The construction for evaluation indicator system of ecological restoration; the evaluation methods of ecological restoration; monitoring and dynamic evaluation of ecological restoration. The meeting stressed the importance of evaluation in the process of ecological restoration and concerned the challenges in evaluation of ecological restoration. The conference had the following enlightenments for China' s research on evaluation of ecological restoration: 1) Strengthening the construction of comprehensive evaluation indicators system and focusing on the multi-participation in the evaluation process. 2) Paying more attentions on scale effect and scale transformation in the evaluation process of ecological restoration. 3) Expanding the application of 3S technology in assessing the success of ecological restoration and promoting the dynamic monitoring of ecological restoration. 4) Carrying out international exchanges and cooperation actively, and promoting China's international influence in ecological restoration research.

  20. LANDSCAPE ECOLOGICAL METHOD TO STUDY AGRICULTURAL VEGETATION: SOME EXAMPLES FROM THE PO VALLEY

    Directory of Open Access Journals (Sweden)

    E. GIGLIO

    2006-01-01

    Full Text Available Vegetation is the most important landscape component, as regards to its ability to catch solar energy and to transform it, but also to shape the landscape, to structure the space, to create the fit environment for different animal species, to contribute to the maintenance of a correct metastability level for the landscape, etc. It is a biological system which acts under the constraints of the principles of the System Theory and owns the same properties of any other living system: so, it is a complex adaptive, hierarchical, dynamic, dissipative, self-organizing, self-transcendent, autocatalytic, self-maintaining system and follows the non-equilibrium thermodynamic. Its ecological state can be investigated through the comparison between “gathered data” (pathology and “normal data” (physiology for analogous types of vegetation. The Biological Integrated School of Landscape Ecology provides an integrated methodology to define ecological threshold limits of the different Agricultural Landscape types and applies to agricultural vegetation the specific part of the new methodology already tested to studying forests (the Landscape Biological Survey of Vegetation. Ecological quality, better and worst parameters, biological territorial capacity of vegetated corridors, agricultural field, poplar groves, orchards and woody remnant patches are investigated. Some examples from diverse agricultural landscapes of the Po Valley will be discussed. KEY WORDS: agricultural landscape, vegetation, landscape ecology, landscape health, Biological Integrated Landscape Ecology, Landscape Biological Survey of vegetation.

  1. LANDSCAPE ECOLOGICAL METHOD TO STUDY AGRICULTURAL VEGETATION: SOME EXAMPLES FROM THE PO VALLEY

    Directory of Open Access Journals (Sweden)

    E. GIGLIO

    2006-05-01

    Full Text Available Vegetation is the most important landscape component, as regards to its ability to catch solar energy and to transform it, but also to shape the landscape, to structure the space, to create the fit environment for different animal species, to contribute to the maintenance of a correct metastability level for the landscape, etc. It is a biological system which acts under the constraints of the principles of the System Theory and owns the same properties of any other living system: so, it is a complex adaptive, hierarchical, dynamic, dissipative, self-organizing, self-transcendent, autocatalytic, self-maintaining system and follows the non-equilibrium thermodynamic. Its ecological state can be investigated through the comparison between “gathered data” (pathology and “normal data” (physiology for analogous types of vegetation. The Biological Integrated School of Landscape Ecology provides an integrated methodology to define ecological threshold limits of the different Agricultural Landscape types and applies to agricultural vegetation the specific part of the new methodology already tested to studying forests (the Landscape Biological Survey of Vegetation. Ecological quality, better and worst parameters, biological territorial capacity of vegetated corridors, agricultural field, poplar groves, orchards and woody remnant patches are investigated. Some examples from diverse agricultural landscapes of the Po Valley will be discussed. KEY WORDS: agricultural landscape, vegetation, landscape ecology, landscape health, Biological Integrated Landscape Ecology, Landscape Biological Survey of vegetation.

  2. Predicting high risk births with contraceptive prevalence and contraceptive method-mix in an ecologic analysis

    Directory of Open Access Journals (Sweden)

    Jamie Perin

    2017-11-01

    Full Text Available Abstract Background Increased contraceptive use has been associated with a decrease in high parity births, births that occur close together in time, and births to very young or to older women. These types of births are also associated with high risk of under-five mortality. Previous studies have looked at the change in the level of contraception use and the average change in these types of high-risk births. We aim to predict the distribution of births in a specific country when there is a change in the level and method of modern contraception. Methods We used data from full birth histories and modern contraceptive use from 207 nationally representative Demographic and Health Surveys covering 71 countries to describe the distribution of births in each survey based on birth order, preceding birth space, and mother’s age at birth. We estimated the ecologic associations between the prevalence and method-mix of modern contraceptives and the proportion of births in each category. Hierarchical modelling was applied to these aggregated cross sectional proportions, so that random effects were estimated for countries with multiple surveys. We use these results to predict the change in type of births associated with scaling up modern contraception in three different scenarios. Results We observed marked differences between regions, in the absolute rates of contraception, the types of contraceptives in use, and in the distribution of type of birth. Contraceptive method-mix was a significant determinant of proportion of high-risk births, especially for birth spacing, but also for mother’s age and parity. Increased use of modern contraceptives is especially predictive of reduced parity and more births with longer preceding space. However, increased contraception alone is not associated with fewer births to women younger than 18 years or a decrease in short-spaced births. Conclusions Both the level and the type of contraception are important factors in

  3. METHODS FOR THE ARRANGEMENT OF IMMERSED TUBE TUNNELS DURING CONSTRUCTION BASED ON STRUCTURALLY UNSTABLE SOILS

    Directory of Open Access Journals (Sweden)

    E. N. Kurbatskiy

    2017-01-01

    Full Text Available Objectives. The aim of the research is to develop the most effective construction and technological methods for strengthening the bottom of rivers and bays, composed of weak structurally unstable soils, including zones with seismic activity, using pile foundations with broadening and rock filling with micropiles.Methods. The method of constructing combined transport transitions was applied, consisting of overpasses running over relatively shallow channels from coasts to artificial islands on which the route enters tunnels crossing deep shipping canals.Results. The foreign experience in the construction of immersed tube tunnels in the construction of transport crossings through the extended river and sea barriers has been analytically generalised. The features, advantages and disadvantages of the construction of immersed tube tunnels in some countries of the world are revealed.Conclusion. A large number of already constructed and operated transport transits, including immersed tube tunnels, testifies to the advantages of such projects, as compared to other types of transport transitions like bridges and tunnels constructed using mining techniques. Constructiontechnological methods for strengthening the bottom of rivers and bays, composed of weak structurally unstable soils, are proposed. When selecting a design of a bridge to ensure the passage of hightonnage vessels, it is necessary to build large-span bridges on high supports. Weak, structurally unstable soils, deep bedding of bedrock and high seismicity of the area will create serious problems in the construction and operation of such structures. The natural vibration frequencies of the large-span bridges fall into the region of the dominant earthquake frequencies, which can lead to resonant phenomena and damage the structure even under weak seismic influences. Tunnels are less susceptible to seismic impacts, since, unlike ground structures, they don't experience resonance phenomena. When

  4. Evaluation of methods to assess push/pull forces in a construction task

    NARCIS (Netherlands)

    Hoozemans, M J; Van Der Beek, Allard J.; Frings-Dresena, M H; Van der Molen, Henk F.

    2001-01-01

    The objective of the present study was to determine the validity of methods to assess push/pull forces exerted in a construction task. Forces assessed using a hand-held digital force gauge were compared to those obtained using a highly accurate measuring frame. No significant differences were found

  5. Applying the Mixed Methods Instrument Development and Construct Validation Process: the Transformative Experience Questionnaire

    Science.gov (United States)

    Koskey, Kristin L. K.; Sondergeld, Toni A.; Stewart, Victoria C.; Pugh, Kevin J.

    2018-01-01

    Onwuegbuzie and colleagues proposed the Instrument Development and Construct Validation (IDCV) process as a mixed methods framework for creating and validating measures. Examples applying IDCV are lacking. We provide an illustrative case integrating the Rasch model and cognitive interviews applied to the development of the Transformative…

  6. Contact dermatitis is an unrecognized problem in the construction industry : Comparison of four different assessment methods

    NARCIS (Netherlands)

    Timmerman, Johan G; Heederik, Dick; Spee, Ton; van Rooy, Frits G; Krop, Esmeralda J M; Rustemeyer, Thomas; Smit, Lidwien A M

    2017-01-01

    BACKGROUND: A high contact dermatitis symptoms prevalence has been observed in Dutch construction workers. METHODS: Contact dermatitis was diagnosed by an expert panel using questionnaire data and photographs of 751 subjects' hands. A subset was evaluated by two occupational physicians. Their

  7. A study of best management practices for enhancing productivity in building projects: construction methods perspectives

    Directory of Open Access Journals (Sweden)

    Argaw Tarekegn Gurmu

    2016-09-01

    Full Text Available This research investigates management practices that have the potential to enhance productivity in building projects by focusing on construction methods. In phase 1 of the study, face-to-face interviews with nineteen experts were conducted to identify the best management practices for construction methods. The qualitative data analysis reached saturation and resulted in a list of best practices for construction methods that are relevant to the local industry. The second phase used an industry-wide survey to prioritize the best practices. Accordingly, project start-up plan, traffic control plan, machinery positioning strategy, project completion plan, and dynamic site layout plan were shown to be the top five best practices for construction methods. The study also revealed that high levels of implementation of best practices are associated with low levels of project delays. The use of best practices also varied according to the project costs. There were no discernible differences between the top five best practices. The authors suggest that they should be implemented jointly to improve productivity in building projects. Contractors could use the logistic regression model developed, to predict the probability of exceeding a baseline productivity factor and, on that basis, implement corrective actions to achieve the desired level of productivity.

  8. A Method of Sample Models of Program Construction in Terms of Petri Nets

    Directory of Open Access Journals (Sweden)

    D. I. Kharitonov

    2015-01-01

    Full Text Available In the article a method of automated construction of Petri nets simulating the behaviour of imperative programs is considered from the formal point of view. Petri net samples with certain characteristics are necessary in programming new algorithms for program analysis; in particular, they can be used for developing or optimizing algorithms of Petri nets compositions and decompositions, building the reachability tree, checking invariants and so on. The generation process consists of two stages. At the first stage, construction templates for a resulting net and parameters for construction are described. With the help of these parameters it is possible to regulate the final size and the absolute or relative amount of certain structures in the resulting net. At the second stage, iterative process of automated net construction is used for Petri net generation of any size, limited only by an available computer memory. In the first section of the article the minimum necessary definitions are given and a new version of Petri nets composition operation by places is introduced. Commutative and associative properties of introduced binary operation allow to synchronize any number of Petri nets in arbitrary order. Then construction template is defined as a marked Petri net with input and output interfaces and rules for templates composition using this interfaces. A number of construction templates can be united in a collection, for which the evolution rules are defined. The completeness property of a collection guarantees that the collection evolution results in a Petri net that simulates the imperative program behavior. The article provides a version of the construction templates complete collection and an example of Petri net simulating sequential imperative program construction.

  9. Post-construction monitoring for birds and bats : an examination of methods and issues

    International Nuclear Information System (INIS)

    Ebner, D.; Korpijaakko, C.

    2009-01-01

    The Canadian Environmental Assessment Act (CEAA) stipulates that bird and bat monitoring studies should be conducted following the construction of most wind turbine projects in Canada. The objectives of the monitoring studies are to verify the accuracy of the environmental assessment; determine the effectiveness of any measures taken to mitigate the adverse environmental effects of a project; and to evaluate the cumulative effects on species diversity and numbers. This presentation discussed post-construction monitoring for birds and bats and provided an examination of methods and issues. It emphasized why post-construction monitoring is important. Environmental effects that were examined in the presentation were changes in breeding birds; changes in passage migrants or wintering birds; changes in bat activity; and mortality monitoring/carcass surveys. The key issues regarding the design and implementation of post-construction monitoring programs include variation in field and analytical methods; protocols implemented that can add uncertainty and bias to estimates of mortality; and comparisons of project-specific results with other projects. Other topics that were addressed included federal requirements; provincial requirements; post-construction surveys and carcass searches; search efficiency and analysis. The presentation concluded with a discussion regarding the need for standardization. figs.

  10. Post-construction monitoring for birds and bats : an examination of methods and issues

    Energy Technology Data Exchange (ETDEWEB)

    Ebner, D.; Korpijaakko, C. [Stantec Consulting Ltd., Surrey, BC (Canada)

    2009-07-01

    The Canadian Environmental Assessment Act (CEAA) stipulates that bird and bat monitoring studies should be conducted following the construction of most wind turbine projects in Canada. The objectives of the monitoring studies are to verify the accuracy of the environmental assessment; determine the effectiveness of any measures taken to mitigate the adverse environmental effects of a project; and to evaluate the cumulative effects on species diversity and numbers. This presentation discussed post-construction monitoring for birds and bats and provided an examination of methods and issues. It emphasized why post-construction monitoring is important. Environmental effects that were examined in the presentation were changes in breeding birds; changes in passage migrants or wintering birds; changes in bat activity; and mortality monitoring/carcass surveys. The key issues regarding the design and implementation of post-construction monitoring programs include variation in field and analytical methods; protocols implemented that can add uncertainty and bias to estimates of mortality; and comparisons of project-specific results with other projects. Other topics that were addressed included federal requirements; provincial requirements; post-construction surveys and carcass searches; search efficiency and analysis. The presentation concluded with a discussion regarding the need for standardization. figs.

  11. A study on the economics enhancement of OPR1000 applied to advanced construction methods

    International Nuclear Information System (INIS)

    Park, Ki Jo; Yoon, Eun Sang

    2007-01-01

    OPR1000 (Optimized Power Reactor 1000MW) is a totally improved design model of Korea nuclear power plants and the latest 1,000MW nuclear power plant in the Republic of Korea. Shin Kori 1 and 2 and Shin Wolsong 1 and 2 and under construction and these are OPR1000 types. Although OPR1000 is up to data 1,000MW nuclear power plant, it is not enough to be much superior to other nuclear power plants. Under the WTO and FTA circumstance of domestic and stiff overseas competition for nuclear power plants, it is necessary to enhance the economics of OPR1000. And then, the enhanced economic alternatives are reviewed and the advanced construction methods are considered. Based on research and a comprehensive review of nuclear power plant construction experiences, an alternative application of advanced construction methods is developed and compared with existing OPR1000 for schedule and economics. In this paper, economic analyses of a construction cost and a levelized electricity generation cost are performed

  12. Predicting high risk births with contraceptive prevalence and contraceptive method-mix in an ecologic analysis.

    Science.gov (United States)

    Perin, Jamie; Amouzou, Agbessi; Walker, Neff

    2017-11-07

    Increased contraceptive use has been associated with a decrease in high parity births, births that occur close together in time, and births to very young or to older women. These types of births are also associated with high risk of under-five mortality. Previous studies have looked at the change in the level of contraception use and the average change in these types of high-risk births. We aim to predict the distribution of births in a specific country when there is a change in the level and method of modern contraception. We used data from full birth histories and modern contraceptive use from 207 nationally representative Demographic and Health Surveys covering 71 countries to describe the distribution of births in each survey based on birth order, preceding birth space, and mother's age at birth. We estimated the ecologic associations between the prevalence and method-mix of modern contraceptives and the proportion of births in each category. Hierarchical modelling was applied to these aggregated cross sectional proportions, so that random effects were estimated for countries with multiple surveys. We use these results to predict the change in type of births associated with scaling up modern contraception in three different scenarios. We observed marked differences between regions, in the absolute rates of contraception, the types of contraceptives in use, and in the distribution of type of birth. Contraceptive method-mix was a significant determinant of proportion of high-risk births, especially for birth spacing, but also for mother's age and parity. Increased use of modern contraceptives is especially predictive of reduced parity and more births with longer preceding space. However, increased contraception alone is not associated with fewer births to women younger than 18 years or a decrease in short-spaced births. Both the level and the type of contraception are important factors in determining the effects of family planning on changes in distribution of

  13. Comparison of hardenability calculation methods of the heat-treatable constructional steels

    Energy Technology Data Exchange (ETDEWEB)

    Dobrzanski, L.A.; Sitek, W. [Division of Tool Materials and Computer Techniques in Metal Science, Silesian Technical University, Gliwice (Poland)

    1995-12-31

    Evaluation has been made of the consistency of calculation of the hardenability curves of the selected heat-treatable alloyed constructional steels with the experimental data. The study has been conducted basing on the analysis of present state of knowledge on hardenability calculation employing the neural network methods. Several calculation examples and comparison of the consistency of calculation methods employed are included. (author). 35 refs, 2 figs, 3 tabs.

  14. BIMLR: a method for constructing rooted phylogenetic networks from rooted phylogenetic trees.

    Science.gov (United States)

    Wang, Juan; Guo, Maozu; Xing, Linlin; Che, Kai; Liu, Xiaoyan; Wang, Chunyu

    2013-09-15

    Rooted phylogenetic trees constructed from different datasets (e.g. from different genes) are often conflicting with one another, i.e. they cannot be integrated into a single phylogenetic tree. Phylogenetic networks have become an important tool in molecular evolution, and rooted phylogenetic networks are able to represent conflicting rooted phylogenetic trees. Hence, the development of appropriate methods to compute rooted phylogenetic networks from rooted phylogenetic trees has attracted considerable research interest of late. The CASS algorithm proposed by van Iersel et al. is able to construct much simpler networks than other available methods, but it is extremely slow, and the networks it constructs are dependent on the order of the input data. Here, we introduce an improved CASS algorithm, BIMLR. We show that BIMLR is faster than CASS and less dependent on the input data order. Moreover, BIMLR is able to construct much simpler networks than almost all other methods. BIMLR is available at http://nclab.hit.edu.cn/wangjuan/BIMLR/. © 2013 Elsevier B.V. All rights reserved.

  15. Efficiency assessment method of financial leasing as a factor of innovative development of a construction complex for a lessee in comparison with a credit

    Directory of Open Access Journals (Sweden)

    Alekseeva Tat’yana Romanovna

    Full Text Available Modernization and innovative and technological rearmament of a construction complex is one of the priority problems of national economy development. Development and implementation of innovative technologies in the process of creating construction production will allow improving its quality, consumer characteristics, ensuring energy efficiency and ecological safety of buildings and constructions. One of problems of innovative development of a construction complex is the problem of financing of innovative activity. In our opinion leasing is one of effective ways of its solving. In the leasing transaction the owner of an asset temporarily transfers a right to use an asset to other party. The owner of an asset is a lessor. Other party is a lessee. The lessor makes a lease for a specified time in return for a periodic rental payments from the lessee. One of the advantages of leasing is that it provides alternative to ownership. Also lessees benefit from a number of tax advantages. Leasing has many other advantages. The assessment method of the efficiency of financial leasing as a factor of innovative development of a construction complex for a lessee enterprise in comparison with the credit is shown in article. As a result of scientific research we specified the criteria of this assessment.

  16. Ecological construction methods are energy saving construction methods - experiences with the low-energy standard; Oekologisches Bauen ist energiesparendes Bauen - Erfahrungen mit dem Niedrigenergiestandard

    Energy Technology Data Exchange (ETDEWEB)

    Feist, W. [Inst. Wohnen und Umwelt, Darmstadt (Germany)

    1995-09-01

    Efficient energy utilisation (intelligent energy saving techniques) is characterised by the following features. When realised in new buildings using currently available techniques it can help save up to 90% of what has hitherto been considered normal energy consumption. It becomes economically efficient for reductions in energy consumption of 50% or more. In terms of cost it outcompetes all non-fossil energy carriers (i.e., excluding oil, natural gas, and coal) of the future. (orig./HW) [Deutsch] Die rationelle Energienutzung (`intelligente Einspartechnik`) - kann mit heute verfuegbarer Technik beim Neubau bis ca. 90% der bisher verwendeten Energie einsparen helfen; - ist bei Energieeinsparungen von ueber 50% bereits heute wirtschaftlich vertretbar; - ist gegenueber allen Zukunftsenergietraegern, die nicht auf fossilen Brennstoffen (also Oel, Erdgas und Kohle) basieren, konkurrenzlos kostenguenstig. (orig./HW)

  17. Field and laboratory test methods for geomembranes during waste management facility construction

    International Nuclear Information System (INIS)

    Allen, S.R.; McCutchan, J.B.

    1991-01-01

    Hazardous waste management facilities are required to use approved lining and leak detection systems to prevent the migration of waste into the environment. Synthetic flexible membrane liners (FMLs) have effectively served as the critical barrier for waste containment and fluid migration. The U.S. EPA has established minimum technology requirements for the construction of lined facilities that include detailed and documented Construction Quality Assurance (CQA) plans. The U.S. EPA (EPA) recognizes that CQA during field construction is imperative for successful completion of project work and long-term facility operation. This paper discusses the importance of CQA during FML installation and the practical aspects of implementing a successful CQA program. Standard methods used for FML evaluation, in both the field and laboratory, are discussed and specific aspects of seam testing and data evaluation are addressed. The general importance of comprehensive definition of geomembrane seam field failures is strongly emphasized so that an appropriate response to test failures can be recommended

  18. First-principle optimal local pseudopotentials construction via optimized effective potential method

    International Nuclear Information System (INIS)

    Mi, Wenhui; Zhang, Shoutao; Wang, Yanchao; Ma, Yanming; Miao, Maosheng

    2016-01-01

    The local pseudopotential (LPP) is an important component of orbital-free density functional theory, a promising large-scale simulation method that can maintain information on a material’s electron state. The LPP is usually extracted from solid-state density functional theory calculations, thereby it is difficult to assess its transferability to cases involving very different chemical environments. Here, we reveal a fundamental relation between the first-principles norm-conserving pseudopotential (NCPP) and the LPP. On the basis of this relationship, we demonstrate that the LPP can be constructed optimally from the NCPP for a large number of elements using the optimized effective potential method. Specially, our method provides a unified scheme for constructing and assessing the LPP within the framework of first-principles pseudopotentials. Our practice reveals that the existence of a valid LPP with high transferability may strongly depend on the element.

  19. Study on construction method of concrete in the underground research laboratory. 2

    International Nuclear Information System (INIS)

    Iriya, Keishiro; Mikami, Tetsuji; Akiyoshi, Kenji; Uegaki, Yoshiaki

    2002-02-01

    The underground research laboratory, which will be constructed in Horonobe, plays a role of demonstration of construction technique upon nuclear waste repositories. Low alkalinity cement is one of candidates for repositories as a cementitious material in order to prevent alteration of bentonite and rock by hyper alkaline solution. JNC has developed a low alkalinity cement (HFSC) which contains a lot of fly ash, and has studied the physical and chemical properties by laboratory test. However workability which is required for construction procedure of repositories has not been studied enough yet. This study shows if requirements in actual construction, such as shotcreting, self-compacting, and, grouting, are fulfilled, and if the workability is preferable for tunneling construction. It is demonstrated that HFSC is applicable for shotcreting by testing in a modeled tunnel. It is pointed out that re-bars have a possibility of corrosion in low alkalinity cement. In-site test for saline water which may accelerate corrosion is started by setting specimen made in last year. Analyzing and assessing will be done next year. Construction method of tunnel lining is investigated in case of applying pre-cast segments. Self-compacting concrete is adopted, since added silica-fume needs superplasticizer and its workability is very flowable. Two piece of segment were made for the section which designed for a ordinary urban tunnel. It is noted that pre-casting concrete can be made by HFSC. Super fine cement powder for grouting which indicate low alkalinity can be selected by combination of grinned lime stone powder and silica fume with grinned ordinary Portland cement. The items to be improved toward using in Horonobe construction are pointed out by results of this study and summarized a study plan is described. Major problem to be solved is delaying compressive strength generation of HFSC. It is recognized in shotcrete and self-compacting concrete. Selecting types of fly ash and

  20. Perception of User Criteria in the Context of Sustainability of Modern Methods of Construction Based on Wood

    Directory of Open Access Journals (Sweden)

    Jozef Švajlenka

    2018-01-01

    Full Text Available Recent developments in the construction industry have brought more efficient and sustainable technologies, technological procedures, and materials. An example of this are modern methods of construction, which offer larger production volumes with a higher quality and shorter procurement time. The goal of those methods is to improve construction sustainability through quality improvement, customer satisfaction, shortened construction time, and reduced environmental impact. The main goal of this research is to demonstrate, by means of theoretical assumptions, surveys, and analyses, the sustainability of modern methods of construction based on wood. The work focuses on identifying the user criteria for construction sustainability. Selected user criteria of construction sustainability are applied in a socio-economic survey whose purpose is to determine how users perceive the efficiency of selected construction systems. We evaluate certain user parameters in the context of sustainability by relying on the users of buildings (family houses which have already been built and compare the results with declared design parameters.

  1. Investigation of e-Linac tube construction method and implementation suitable method for IPM e-Linac

    Directory of Open Access Journals (Sweden)

    F ghasemi

    2015-09-01

    Full Text Available The goal of electron linear accelerator project in institute for research in fundamental sciences(IPM is to build its components as many as they can in Iran. This accelerator is a traveling wave type. Investigations show that there are various techniques in forming and connecting the accelerating tube cavities. The shrinking method applied for constructing the accelerating tube is selected based on the one applied for Stanford University’s Mark III accelerator. With success in building an 8-cavity test tube and finding the problems of the method, the construction of the final accelerating tube with 24 cavities has been accomplished. The results show that the obtained frequency of 2996.5 MHz and quality factor of 11200, satisfy the design desired values.

  2. Material characteristics and construction methods for a typical research reactor concrete containment in Iran

    International Nuclear Information System (INIS)

    Ebrahimia, Mahsa; Suha, Kune Y.; Eghbalic, Rahman; Jahan, Farzaneh Asadi malek

    2012-01-01

    Generally selecting an appropriate material and also construction style for a concrete containment due to its function and special geometry play an important role in applicability and also construction cost and duration decrease in a research reactor (RR) project. The reactor containment enclosing the reactor vessel comprises physical barriers reflecting the safety design and construction codes, regulations and standards so as to prevent the community and the environment from uncontrolled release of radioactive materials. It is the third and the last barrier against radioactivity release. It protects the reactor vessel from such external events as earthquake and aircraft crash as well. Thus, it should be designed and constructed in such a manner as to withstand dead and live loads, ground and seismic loads, missiles and aircraft loads, and thermal and shrinkage loads. This study aims to present a construction method for concrete containment of a typical RR in Iran. The work also presents an acceptable characteristic for concrete and reinforcing re bar of a typical concrete containment. The current study has evaluated the various types of the RR containments. The most proper type was selected in accordance with the current knowledge and technology of Iran

  3. Material characteristics and construction methods for a typical research reactor concrete containment in Iran

    Energy Technology Data Exchange (ETDEWEB)

    Ebrahimia, Mahsa; Suha, Kune Y. [Seoul National Univ., Seoul (Korea, Republic of); Eghbalic, Rahman; Jahan, Farzaneh Asadi malek [School of Architecture and Urbanism, Qazvin (Iran, Islamic Republic of)

    2012-10-15

    Generally selecting an appropriate material and also construction style for a concrete containment due to its function and special geometry play an important role in applicability and also construction cost and duration decrease in a research reactor (RR) project. The reactor containment enclosing the reactor vessel comprises physical barriers reflecting the safety design and construction codes, regulations and standards so as to prevent the community and the environment from uncontrolled release of radioactive materials. It is the third and the last barrier against radioactivity release. It protects the reactor vessel from such external events as earthquake and aircraft crash as well. Thus, it should be designed and constructed in such a manner as to withstand dead and live loads, ground and seismic loads, missiles and aircraft loads, and thermal and shrinkage loads. This study aims to present a construction method for concrete containment of a typical RR in Iran. The work also presents an acceptable characteristic for concrete and reinforcing re bar of a typical concrete containment. The current study has evaluated the various types of the RR containments. The most proper type was selected in accordance with the current knowledge and technology of Iran.

  4. Chapter 15: Commercial New Construction Evaluation Protocol. The Uniform Methods Project: Methods for Determining Energy Efficiency Savings for Specific Measures

    Energy Technology Data Exchange (ETDEWEB)

    Kurnik, Charles W. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Keates, Steven [ADM Associates, Inc., Atlanta, GA (United States)

    2017-10-09

    This protocol is intended to describe the recommended method when evaluating the whole-building performance of new construction projects in the commercial sector. The protocol focuses on energy conservation measures (ECMs) or packages of measures where evaluators can analyze impacts using building simulation. These ECMs typically require the use of calibrated building simulations under Option D of the International Performance Measurement and Verification Protocol (IPMVP).

  5. Marine ecology

    International Nuclear Information System (INIS)

    Anon.

    1977-01-01

    Studies on marine ecology included marine pollution; distribution patterns of Pu and Am in the marine waters, sediments, and organisms of Bikini Atoll and the influence of physical, chemical, and biological factors on their movements through marine biogeochemical systems; transfer and dispersion of organic pollutants from an oil refinery through coastal waters; transfer of particulate pollutants, including sediments dispersed during construction of offshore power plants; and raft culture of the mangrove oysters

  6. A qualitative model construction method of nuclear power plants for effective diagnostic knowledge generation

    International Nuclear Information System (INIS)

    Yoshikawa, Shinji; Endou, Akira; Kitamura, Yoshinobu; Sasajima, Munehiko; Ikeda, Mitsuru; Mizoguchi, Riichiro.

    1994-01-01

    This paper discusses a method to construct a qualitative model of a nuclear power plant, in order to generate effective diagnostic knowledge. The proposed method is to prepare deep knowledge to be provided to a knowledge compiler based upon qualitative reasoning (QR). Necessity of knowledge compilation for nuclear plant diagnosis will be explained first, and conventionally-experienced problems in qualitative reasoning and a proposed method to overcome this problem is shown next, then a sample procedure to build a qualitative nuclear plant model is demonstrated. (author)

  7. Monitoring the Error Rate of Modern Methods of Construction Based on Wood

    Science.gov (United States)

    Švajlenka, Jozef; Kozlovská, Mária

    2017-06-01

    A range of new and innovative construction systems, currently developed, represent modern methods of construction (MMC), which has the ambition to improve the performance parameters of buildings throughout their life cycle. Regarding the implementation modern methods of construction in Slovakia, assembled buildings based on wood seem to be the most preferred construction system. In the study, presented in the paper, were searched already built and lived-in wood based family houses. The residents' attitudes to such type of buildings in the context with declared designing and qualitative parameters of efficiency and sustainability are overlooked. The methodology of the research study is based on the socio-economic survey carried out during the years 2015 - 2017 within the Slovak Republic. Due to the large extent of data collected through questionnaire, only selected parts of the survey results are evaluated and discussed in the paper. This paper is aimed at evaluating the quality of buildings expressed in a view of users of existing wooden buildings. Research indicates some defects, which can be eliminated in the next production process. Research indicates, that some defects occur, so the production process quality should be improved in the future development.

  8. The method of selecting an integrated development territory for the high-rise unique constructions

    Science.gov (United States)

    Sheina, Svetlana; Shevtsova, Elina; Sukhinin, Alexander; Priss, Elena

    2018-03-01

    On the basis of data provided by the Department of architecture and urban planning of the city of Rostov-on-don, the problem of the choice of the territory for complex development that will be in priority for the construction of high-rise and unique buildings is solved. The objective of the study was the development of a methodology for selection of the area and the implementation of the proposed method on the example of evaluation of four-territories complex development. The developed method along with standard indicators of complex evaluation considers additional indicators that assess the territory from the position of high-rise unique building. The final result of the study is the rankings of the functional priority areas that takes into account the construction of both residential and public and business objects of unique high-rise construction. The use of the developed methodology will allow investors and customers to assess the investment attractiveness of the future unique construction project on the proposed site.

  9. The method of selecting an integrated development territory for the high-rise unique constructions

    Directory of Open Access Journals (Sweden)

    Sheina Svetlana

    2018-01-01

    Full Text Available On the basis of data provided by the Department of architecture and urban planning of the city of Rostov-on-don, the problem of the choice of the territory for complex development that will be in priority for the construction of high-rise and unique buildings is solved. The objective of the study was the development of a methodology for selection of the area and the implementation of the proposed method on the example of evaluation of four-territories complex development. The developed method along with standard indicators of complex evaluation considers additional indicators that assess the territory from the position of high-rise unique building. The final result of the study is the rankings of the functional priority areas that takes into account the construction of both residential and public and business objects of unique high-rise construction. The use of the developed methodology will allow investors and customers to assess the investment attractiveness of the future unique construction project on the proposed site.

  10. Tunnel boring an alternative method in construction of spent fuel repositories

    International Nuclear Information System (INIS)

    Christersson, Jukka

    1984-05-01

    In projecting of the final disposal of nuclear waste in geological formations a great importance should be paid to the selection of the tunneling method. The environment of the chosen repository area should not be exposed to any but as minor disturbances as possible by the excavation method applied. This study approaches full face tunneling methods as an alternative to conventional drill-and-blast methods in the construction of spent fuel repository tunnels. According to experiences up till now it is obvious, that tunnelboring today is fully capable technically competing with conventional tunneling methods, even in the hardest granitic rocks. The most important advantages, it provides for the construction of repositories, are: The methods does not produce any damage in the surrounding rock. Possibility to use placement techniques, which do not require preparing of additive repository holes for the fuel elements. Saving in the use of expensive filling material. The fact, that tunnel boring in hard rock is an expensive alternative, is still valid. Constuction of straight lined tunnels in unfractured rocks by tunnel boring would cost about 30-40% more than by conventional methods. The lay out arrangement of bored tunnels still have a great influence on tunnel boring machine's economy. Due to this it would be round 40-70% more expensive method in the construction of spent fuel repositories. However intensive development w is being carried out to eliminate these limitations and to make machines more flexible. Future trends in tunnel boring look good at the moment. The number of sold units has been increasing and new applications have widen out during last ten years. Harder and more abrasive rocks can now be bored than ever before and the trend seems to continue. It also looks like the cost difference in the hardest rocks is firmly getting smaller and smaller all the time. (author)

  11. Millennial-scale vegetation changes in the tropical Andes using ecological grouping and ordination methods

    NARCIS (Netherlands)

    Urrego, D.H.; Hooghiemstra, H.; Rama-Corredor, O.; Martrat, B.; Grimalt, J.O.; Thompson, L.; Bush, M.B.; González-Carranza, Z.; Hanselman, J.; Valencia, B.; Velásquez-Ruiz, C.

    2016-01-01

    We compare eight pollen records reflecting climatic and environmental change from northern and southern sites in the tropical Andes. Our analysis focuses on the last 30 000 years, with particular emphasis on the Pleistocene to Holocene transition. We explore ecological grouping and downcore

  12. A novel integrative method for measuring body condition in ecological studies based on physiological dysregulation

    NARCIS (Netherlands)

    Milot, E.; Cohen, A.A.; Vézina, F.; Buehler, D.M.; Matson, K.D.; Piersma, T.

    2014-01-01

    1. The body condition of free-ranging animals affects their response to stress, decisions, ability to fulfil vitalneeds and, ultimately, fitness. However, this key attribute in ecology remains difficult to assess, and there is aclear need for more integrativemeasures than the common univariate

  13. Missing data in forest ecology and management: advances in quantitative methods [Preface

    Science.gov (United States)

    Tara Barrett; Matti Maltomo

    2012-01-01

    In recent years, substantial progress has been made for handling missing data issues for applications in forest ecology and management, particularly in the area of imputation techniques. A session on this topic was held at the XXlll IUFRO World Congress in Seoul, South Korea, on August 23-28, 2010, resulting in this special issue of six papers that address recent...

  14. A Bayesian method for construction of Markov models to describe dynamics on various time-scales.

    Science.gov (United States)

    Rains, Emily K; Andersen, Hans C

    2010-10-14

    The dynamics of many biological processes of interest, such as the folding of a protein, are slow and complicated enough that a single molecular dynamics simulation trajectory of the entire process is difficult to obtain in any reasonable amount of time. Moreover, one such simulation may not be sufficient to develop an understanding of the mechanism of the process, and multiple simulations may be necessary. One approach to circumvent this computational barrier is the use of Markov state models. These models are useful because they can be constructed using data from a large number of shorter simulations instead of a single long simulation. This paper presents a new Bayesian method for the construction of Markov models from simulation data. A Markov model is specified by (τ,P,T), where τ is the mesoscopic time step, P is a partition of configuration space into mesostates, and T is an N(P)×N(P) transition rate matrix for transitions between the mesostates in one mesoscopic time step, where N(P) is the number of mesostates in P. The method presented here is different from previous Bayesian methods in several ways. (1) The method uses Bayesian analysis to determine the partition as well as the transition probabilities. (2) The method allows the construction of a Markov model for any chosen mesoscopic time-scale τ. (3) It constructs Markov models for which the diagonal elements of T are all equal to or greater than 0.5. Such a model will be called a "consistent mesoscopic Markov model" (CMMM). Such models have important advantages for providing an understanding of the dynamics on a mesoscopic time-scale. The Bayesian method uses simulation data to find a posterior probability distribution for (P,T) for any chosen τ. This distribution can be regarded as the Bayesian probability that the kinetics observed in the atomistic simulation data on the mesoscopic time-scale τ was generated by the CMMM specified by (P,T). An optimization algorithm is used to find the most

  15. The GSC method for constructing the entropy solution of hyperbolic conservation laws and applications

    International Nuclear Information System (INIS)

    Werner, K.D.

    1990-01-01

    In this paper we introduce briefly the Geometrical Shock Correction (GSC) method and consider various fields of applications, with special emphasis on two-phase flow problems in porous media. Some test problems are taken from this field. GSC is a very efficient numerical method for constructing the entropy solution of the Cauchy problem of scalar hyperboli conservation laws (with source term) in one space dimension and in specific two-dimensional cases. The novelty consists in constructing the solution at an arbitrary fixed time t=T>0 in one time step, based on transporting the initial values along characteristics and, if shocks appear, on a correction of the multivalued relation by a geometrical averaging technique. (orig.) With 7 figs [de

  16. A QUADTREE ORGANIZATION CONSTRUCTION AND SCHEDULING METHOD FOR URBAN 3D MODEL BASED ON WEIGHT

    OpenAIRE

    C. Yao; G. Peng; Y. Song; M. Duan

    2017-01-01

    The increasement of Urban 3D model precision and data quantity puts forward higher requirements for real-time rendering of digital city model. Improving the organization, management and scheduling of 3D model data in 3D digital city can improve the rendering effect and efficiency. This paper takes the complexity of urban models into account, proposes a Quadtree construction and scheduling rendering method for Urban 3D model based on weight. Divide Urban 3D model into different rendering weigh...

  17. Application of molecular genetic methods for identification of wood-decaying fungi in wood constructions

    OpenAIRE

    Elena Bobeková; Michal Tomšovský; Petr Horáček

    2008-01-01

    The aim of the paper is to evaluate the utilization of molecular biology methods for detection of wood decaying fungi directly from decomposed wood using a commercial DNA extraction kit developed for soil substrates (PowerSoil™ DNA isolation kit). The experiment based on dry rot fungus (Serpula lacrymans) detection from inoculated wooden pieces under laboratory conditions was followed by field detection of wood-decaying fungi from wood structures on building constructions. Fungal DNA was ide...

  18. Improvement of Cost Calculation in Constructions – Application of the Standard Cost Method

    Directory of Open Access Journals (Sweden)

    Adela Breuer

    2010-12-01

    Full Text Available Grace to the analysis of several commercial companies effectively performed “on the field”, we could remark the necessity to change the method of cost calculation, our motivation being related to the simplification of calculations and the reduction of the labour volume, but especially the necessity to know in due time the deviations occurred as well as the causes having led to their apparition. The importance of knowing the deviations in due time results from the very basic characteristics of the constructions execution, i.e. the performance of works during several budgetary years, which leads to the modifications of prices and materials, the introduction of new technologies, and to the performance of open air activities, making the execution of constructions works be influenced by the atmospheric condition. But the most important aspect of knowing the deviations is the correct determination of expenses and their inscribing in the corresponding period, in view of determining the result of the budgetary year. Our proposal for the enhancement of the method of cost calculation in constructions is the application of the standard cost method in the variant “single standard cost”.

  19. Aespoe Hard Rock Laboratory. Characterisation methods and instruments. Experiences from the construction phase

    International Nuclear Information System (INIS)

    Almen, Karl-Erik; Stenberg, Leif

    2005-12-01

    This report describes the different investigation methods used during the Aespoe HRL construction phase which commenced 1990 and ended 1995. The investigation methods are described with respect to performance, errors, uncertainty and usefulness in determined, analysed and/or calculated parameter values or other kind of geoscientific information. Moreover, other comments of the different methods, like those related to the practical performance of the measurements or tests are given. The practical performance is a major task as most of the investigations were conducted in parallel with the construction work. Much of the wide range of investigations carried out during the tunnelling work required special efforts of the personnel involved. Experiences and comments on these operations are presented in the report. The pre-investigation methods have been evaluated by comparing predictions based on pre-investigation models with data and results from the construction phase and updated geoscientific models. In 1997 a package of reports describe the general results of the pre-investigations. The investigation methods are in this report evaluated with respect to usefulness for underground characterisation of a rock volume, concerning geological, geohydrological, hydrochemical and rock mechanical properties. The report describes out opinion of the methods after the construction phase, i.e. the same platform of knowledge as for the package of reports of 1997. The evaluation of usefulness of the underground investigation methods are structured according to the key issues used for the preinvestigation modelling and predictions, i.e. Geological-structural model, Groundwater flow (hydrogeology), Groundwater chemistry (hydrochemistry), Transport of solutes and Mechanical stability models (or rock mechanics). The investigation methods selected for the different subjects for which the predictions were made are presented. Some of the subjects were slightly modified or adjusted during

  20. Aespoe Hard Rock Laboratory. Characterisation methods and instruments. Experiences from the construction phase

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-12-15

    This report describes the different investigation methods used during the Aespoe HRL construction phase which commenced 1990 and ended 1995. The investigation methods are described with respect to performance, errors, uncertainty and usefulness in determined, analysed and/or calculated parameter values or other kind of geoscientific information. Moreover, other comments of the different methods, like those related to the practical performance of the measurements or tests are given. The practical performance is a major task as most of the investigations were conducted in parallel with the construction work. Much of the wide range of investigations carried out during the tunnelling work required special efforts of the personnel involved. Experiences and comments on these operations are presented in the report. The pre-investigation methods have been evaluated by comparing predictions based on pre-investigation models with data and results from the construction phase and updated geoscientific models. In 1997 a package of reports describe the general results of the pre-investigations. The investigation methods are in this report evaluated with respect to usefulness for underground characterisation of a rock volume, concerning geological, geohydrological, hydrochemical and rock mechanical properties. The report describes out opinion of the methods after the construction phase, i.e. the same platform of knowledge as for the package of reports of 1997. The evaluation of usefulness of the underground investigation methods are structured according to the key issues used for the preinvestigation modelling and predictions, i.e. Geological-structural model, Groundwater flow (hydrogeology), Groundwater chemistry (hydrochemistry), Transport of solutes and Mechanical stability models (or rock mechanics). The investigation methods selected for the different subjects for which the predictions were made are presented. Some of the subjects were slightly modified or adjusted during

  1. Evaluation on applicability of construction methods and construction quality of low-diffusion layer of cavern type radioactive waste disposal facility

    International Nuclear Information System (INIS)

    Takechi, Shin-ichi; Yokozeki, Kosuke; Terada, Kenji; Akiyama, Yoshihiro; Yada, Tsutomu; Tsuji, Yukikazu

    2014-01-01

    A performance verification experiment of cavern type radioactive waste disposal facility with a real scale construction is being conducted to evaluate the applicability of proposed construction methods and construction quality of the facility. In this paper, we confirmed that the low-diffusion layer, which is one of the cementitious materials based members, could be filled with mortar from end to end of the member; cracks of low-diffusion layer would not affect the long-term safety evaluation of the facility. And also we figured out the relationship between the material strength and the accumulated temperature, relationship between diffusion coefficient and porosity of low-diffusion layer. (author)

  2. Computational methods for constructing protein structure models from 3D electron microscopy maps.

    Science.gov (United States)

    Esquivel-Rodríguez, Juan; Kihara, Daisuke

    2013-10-01

    Protein structure determination by cryo-electron microscopy (EM) has made significant progress in the past decades. Resolutions of EM maps have been improving as evidenced by recently reported structures that are solved at high resolutions close to 3Å. Computational methods play a key role in interpreting EM data. Among many computational procedures applied to an EM map to obtain protein structure information, in this article we focus on reviewing computational methods that model protein three-dimensional (3D) structures from a 3D EM density map that is constructed from two-dimensional (2D) maps. The computational methods we discuss range from de novo methods, which identify structural elements in an EM map, to structure fitting methods, where known high resolution structures are fit into a low-resolution EM map. A list of available computational tools is also provided. Copyright © 2013 Elsevier Inc. All rights reserved.

  3. SHAPE AND CONSTRUCTION OF BRICK VAULTS. CRITERIA, METHODS AND TOOLS FOR A POSSIBLE CATALOGUE

    Directory of Open Access Journals (Sweden)

    R. Brumana

    2017-05-01

    Full Text Available The use of cloister vaults in the construction of noble buildings, as covering elements for square or rectangular rooms, is widespread and well-known. The geometric continuity at the intrados makes generally possible the execution all over the span of frescoes, stucco and decorations. The construction of brick vaults, from the late Middle Age, was sped up by limiting the centering to the wooden planks arches that were instrumental in the profile determination. Nowadays, the availability of several procedures, phases and tools for carrying out a survey allows to draw reliable assumptions about the construction methods and the execution time. It is mandatory to determine the properties of the binders, the shape and dimensions of the bricks, and to carry out a comparison between the geometry of the intrados surface and the evidences emerging at the extrados. The support of the laser scanner technique allows to accurately identify the surface profile and thickness. All these indications, in turn, are useful, in view of an interpretation of the structural behavior, to identify weaknesses, and to highlight contributing factors of instability (if any. The paper focuses on a well-documented case, the Magio Grasselli palace in Cremona in which the cloister vaults of two main rooms show different construction systems, although they were built almost at the same time. The thermographic recordings and laser-scanner surveys highlight the various arrangements used for the cloister vaults.

  4. Methodical approaches to value assessment and determination of the capitalization level of high-rise construction

    Science.gov (United States)

    Smirnov, Vitaly; Dashkov, Leonid; Gorshkov, Roman; Burova, Olga; Romanova, Alina

    2018-03-01

    The article presents the analysis of the methodological approaches to cost estimation and determination of the capitalization level of high-rise construction objects. Factors determining the value of real estate were considered, three main approaches for estimating the value of real estate objects are given. The main methods of capitalization estimation were analyzed, the most reasonable method for determining the level of capitalization of high-rise buildings was proposed. In order to increase the value of real estate objects, the author proposes measures that enable to increase significantly the capitalization of the enterprise through more efficient use of intangible assets and goodwill.

  5. Application of molecular genetic methods for identification of wood-decaying fungi in wood constructions

    Directory of Open Access Journals (Sweden)

    Elena Bobeková

    2008-01-01

    Full Text Available The aim of the paper is to evaluate the utilization of molecular biology methods for detection of wood decaying fungi directly from decomposed wood using a commercial DNA extraction kit developed for soil substrates (PowerSoil™ DNA isolation kit. The experiment based on dry rot fungus (Serpula lacrymans detection from inoculated wooden pieces under laboratory conditions was followed by field detection of wood-decaying fungi from wood structures on building constructions. Fungal DNA was identified using the PCR–based methods including species-specific PCR and sequencing of amplified ITS region of ribosomal DNA.

  6. A new construction technique for tissue-engineered heart valves using the self-assembly method.

    Science.gov (United States)

    Tremblay, Catherine; Ruel, Jean; Bourget, Jean-Michel; Laterreur, Véronique; Vallières, Karine; Tondreau, Maxime Y; Lacroix, Dan; Germain, Lucie; Auger, François A

    2014-11-01

    Tissue engineering appears as a promising option to create new heart valve substitutes able to overcome the serious drawbacks encountered with mechanical substitutes or tissue valves. The objective of this article is to present the construction method of a new entirely biological stentless aortic valve using the self-assembly method and also a first assessment of its behavior in a bioreactor when exposed to a pulsatile flow. A thick tissue was created by stacking several fibroblast sheets produced with the self-assembly technique. Different sets of custom-made templates were designed to confer to the thick tissue a three-dimensional (3D) shape similar to that of a native aortic valve. The construction of the valve was divided in two sequential steps. The first step was the installation of the thick tissue in a flat preshaping template followed by a 4-week maturation period. The second step was the actual cylindrical 3D forming of the valve. The microscopic tissue structure was assessed using histological cross sections stained with Masson's Trichrome and Picrosirius Red. The thick tissue remained uniformly populated with cells throughout the construction steps and the dense extracellular matrix presented corrugated fibers of collagen. This first prototype of tissue-engineered heart valve was installed in a bioreactor to assess its capacity to sustain a light pulsatile flow at a frequency of 0.5 Hz. Under the light pulsed flow, it was observed that the leaflets opened and closed according to the flow variations. This study demonstrates that the self-assembly method is a viable option for the construction of complex 3D shapes, such as heart valves, with an entirely biological material.

  7. Evaluating a Bayesian approach to improve accuracy of individual photographic identification methods using ecological distribution data

    Directory of Open Access Journals (Sweden)

    Richard Stafford

    2011-04-01

    Full Text Available Photographic identification of individual organisms can be possible from natural body markings. Data from photo-ID can be used to estimate important ecological and conservation metrics such as population sizes, home ranges or territories. However, poor quality photographs or less well-studied individuals can result in a non-unique ID, potentially confounding several similar looking individuals. Here we present a Bayesian approach that uses known data about previous sightings of individuals at specific sites as priors to help assess the problems of obtaining a non-unique ID. Using a simulation of individuals with different confidence of correct ID we evaluate the accuracy of Bayesian modified (posterior probabilities. However, in most cases, the accuracy of identification decreases. Although this technique is unsuccessful, it does demonstrate the importance of computer simulations in testing such hypotheses in ecology.

  8. A mixed-methods analysis of social-ecological feedbacks between urbanization and forest persistence

    Directory of Open Access Journals (Sweden)

    Todd BenDor

    2014-09-01

    Full Text Available We examined how social-ecological factors in the land-change decision-making process influenced neighboring decisions and trajectories of alternative landscape ecologies. We decomposed individual landowner decisions to conserve or develop forests in the rapidly growing Charlotte, North Carolina, U.S. region, exposing and quantifying the effects of forest quality, and social and cultural dynamics. We tested the hypothesis that the intrinsic value of forest resources, e.g., cultural attachment to land, influence woodland owners' propensity to sell. Data were collected from a sample of urban, nonindustrial private forest (U-NIPF owners using an individualized survey design that spatially matched land-owner responses to the ecological and timber values of their forest stands. Cluster analysis (n = 126 revealed four woodland owner typologies with widely ranging views on the ecosystem, cultural, and historical values of their forests. Classification tree analysis revealed woodland owners' willingness to sell was characterized by nonlinear, interactive factors, including sense of place values regarding the retention of native vegetation, the size of forest holdings, their connectedness to nature, 'pressure' from surrounding development, and behavioral patterns, such as how often landowners visit their land. Several ecological values and economic factors were not found to figure in the decision to retain forests. Our study design is unique in that we address metropolitan forest persistence across urban-rural and population gradients using a unique individualized survey design that richly contextualizes survey responses. Understanding the interplay between policies and landowner behavior can also help resource managers to better manage and promote forest persistence. Given the region's paucity of policy tools to manage the type and amount of development, the mosaic of land cover the region currently enjoys is far from stable.

  9. Microbial ecology of artisanal italian cheese: Molecular microbial characterization by culture-independent method

    International Nuclear Information System (INIS)

    Colombo, E.; Scarpellini, M.; Franzatti, L.; Dioguardi, L.

    2009-01-01

    Present study will treat the next topics: ecology of the natural and man made environments and functional diversity of bacteria. The microbial communities in artisanal goat cheeses produced in mountain pastures (typical farms) in Piemonte mountain (North of Italy) change a lot during precessing and ripening time. Moreover cheese microbial ecosystems are different in each small dairy because adventitious microflora can come from the environment and contamination the milk before the cheese making process and the product during manufacture and ripening. (Author)

  10. Microbial ecology of artisanal italian cheese: Molecular microbial characterization by culture-independent method

    Energy Technology Data Exchange (ETDEWEB)

    Colombo, E.; Scarpellini, M.; Franzatti, L.; Dioguardi, L.

    2009-07-01

    Present study will treat the next topics: ecology of the natural and man made environments and functional diversity of bacteria. The microbial communities in artisanal goat cheeses produced in mountain pastures (typical farms) in Piemonte mountain (North of Italy) change a lot during precessing and ripening time. Moreover cheese microbial ecosystems are different in each small dairy because adventitious microflora can come from the environment and contamination the milk before the cheese making process and the product during manufacture and ripening. (Author)

  11. Macrosystems ecology: novel methods and new understanding of multi-scale patterns and processes

    Science.gov (United States)

    Songlin Fei; Qinfeng Guo; Kevin Potter

    2016-01-01

    As the global biomes are increasingly threatened by human activities, understanding of macroscale patterns and processes is pressingly needed for effective management and policy making. Macrosystems ecology, which studies multiscale ecologicalpatterns and processes, has gained growing interest in the research community. However, as a relatively new field in...

  12. Predicting ecological flow regime at ungaged sites: A comparison of methods

    Science.gov (United States)

    Murphy, Jennifer C.; Knight, Rodney R.; Wolfe, William J.; Gain, W. Scott

    2012-01-01

    Nineteen ecologically relevant streamflow characteristics were estimated using published rainfall–runoff and regional regression models for six sites with observed daily streamflow records in Kentucky. The regional regression model produced median estimates closer to the observed median for all but two characteristics. The variability of predictions from both models was generally less than the observed variability. The variability of the predictions from the rainfall–runoff model was greater than that from the regional regression model for all but three characteristics. Eight characteristics predicted by the rainfall–runoff model display positive or negative bias across all six sites; biases are not as pronounced for the regional regression model. Results suggest that a rainfall–runoff model calibrated on a single characteristic is less likely to perform well as a predictor of a range of other characteristics (flow regime) when compared with a regional regression model calibrated individually on multiple characteristics used to represent the flow regime. Poor model performance may misrepresent hydrologic conditions, potentially distorting the perceived risk of ecological degradation. Without prior selection of streamflow characteristics, targeted calibration, and error quantification, the widespread application of general hydrologic models to ecological flow studies is problematic. Published 2012. This article is a U.S. Government work and is in the public domain in the USA.

  13. An ecological method for the sampling of nonverbal signalling behaviours of young children with profound and multiple learning disabilities (PMLD).

    Science.gov (United States)

    Atkin, Keith; Lorch, Marjorie Perlman

    2016-08-01

    Profound and multiple learning disabilities (PMLD) are a complex range of disabilities that affect the general health and well-being of the individual and their capacity to interact and learn. We developed a new methodology to capture the non-symbolic signalling behaviours of children with PMLD within the context of a face-to-face interaction with a caregiver to provide analysis at a micro-level of descriptive detail incorporating the use of the ELAN digital video software. The signalling behaviours of participants in a natural, everyday interaction can be better understood with the use of this innovation in methodology, which is predicated on the ecology of communication. Recognition of the developmental ability of the participants is an integral factor within that ecology. The method presented establishes an advanced account of the modalities through which a child affected by PMLD is able to communicate.

  14. a Quadtree Organization Construction and Scheduling Method for Urban 3d Model Based on Weight

    Science.gov (United States)

    Yao, C.; Peng, G.; Song, Y.; Duan, M.

    2017-09-01

    The increasement of Urban 3D model precision and data quantity puts forward higher requirements for real-time rendering of digital city model. Improving the organization, management and scheduling of 3D model data in 3D digital city can improve the rendering effect and efficiency. This paper takes the complexity of urban models into account, proposes a Quadtree construction and scheduling rendering method for Urban 3D model based on weight. Divide Urban 3D model into different rendering weights according to certain rules, perform Quadtree construction and schedule rendering according to different rendering weights. Also proposed an algorithm for extracting bounding box extraction based on model drawing primitives to generate LOD model automatically. Using the algorithm proposed in this paper, developed a 3D urban planning&management software, the practice has showed the algorithm is efficient and feasible, the render frame rate of big scene and small scene are both stable at around 25 frames.

  15. A QUADTREE ORGANIZATION CONSTRUCTION AND SCHEDULING METHOD FOR URBAN 3D MODEL BASED ON WEIGHT

    Directory of Open Access Journals (Sweden)

    C. Yao

    2017-09-01

    Full Text Available The increasement of Urban 3D model precision and data quantity puts forward higher requirements for real-time rendering of digital city model. Improving the organization, management and scheduling of 3D model data in 3D digital city can improve the rendering effect and efficiency. This paper takes the complexity of urban models into account, proposes a Quadtree construction and scheduling rendering method for Urban 3D model based on weight. Divide Urban 3D model into different rendering weights according to certain rules, perform Quadtree construction and schedule rendering according to different rendering weights. Also proposed an algorithm for extracting bounding box extraction based on model drawing primitives to generate LOD model automatically. Using the algorithm proposed in this paper, developed a 3D urban planning&management software, the practice has showed the algorithm is efficient and feasible, the render frame rate of big scene and small scene are both stable at around 25 frames.

  16. Review of Underground Construction Methods and Opening Stability for Repositories in Clay/Shale Media

    Energy Technology Data Exchange (ETDEWEB)

    Hardin, Ernest [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)

    2014-06-01

    This report reviews the art and practice of excavating and constructing underground facilities in clay/shale media, as part of a multi-year evaluation of the technical feasibility of direct disposal of spent nuclear fuel (SNF) in dual-purpose canisters (DPCs). The purpose is to review worldwide examples of large-scale excavations in clay/shale media, the methods used for excavation and constructi on, and the costs. It is anticipated that this information will help to show the feasibility of construction for a deep geologic respository for (on the order of) 10,000 large, heavy, heat-generating waste packages. This report will refine the clay/shale disposal concept for DPC -based waste packages, in support of future studies that include cost estimation.

  17. EVALUATION OF SUBSOIL RESOURCES, LAND RESOURCES AND SOILS IN THE COURSE OF ENGINEERING AND ECOLOGICAL SURVEYS AT THE DESIGN STAGE OF CONSTRUCTION PROJECTS

    Directory of Open Access Journals (Sweden)

    Platov Nikolaj Aleksandrovich

    2012-10-01

    Full Text Available Effective environmental legislative acts, industrial regulations and Construction Standards and Norms do not comprise a consistent system governing rational use of natural resources. Inconsistency of regulatory acts, unavailability of a single approach or a methodological background backing the development of new and the update of effective regulatory documents causes inconsistency of engineering and ecological information. The inconsistency prevents any competent application and correlation of the information about the condition and properties of the ground and soils. The main objective of an engineering survey is the supply of trustworthy information to teams of designers. The quality of the engineering and ecological information stands behind the safety of buildings and structures. The quality of any environment-related information and data concerning any environmental protection measures is consequent to the quality of regulatory documents. In addition to their role in the built environment, resources of the lithosphere serve as the basis for the development of almost all branches of industry and other types of human activities. Effective legal and regulatory documents ignore the fact that subsoil resources serve as the material and physical basis of the living environment on Earth. Foundations of the Legislation of the USSR and the Union Republics on Subsoil Resources served as the basis for their protection. The successor legislation includes in excess of 40 regulatory documents that govern the extraction of natural resources and losses that accompany the exploitation of their deposits. The principal acts include the Unified Rules Governing Protection of Subsoil Resources in the course of Development of Deposits of Solid Mineral Resources (1985 and other acts approved by the Principal State Technical Supervision Committee; the above Unified Rules have not undergone any substantial changes since the days of the USSR. The exception is the

  18. Realist theory construction for a mixed method multilevel study of neighbourhood context and postnatal depression.

    Science.gov (United States)

    Eastwood, John G; Kemp, Lynn A; Jalaludin, Bin B

    2016-01-01

    We have recently described a protocol for a study that aims to build a theory of neighbourhood context and postnatal depression. That protocol proposed a critical realist Explanatory Theory Building Method comprising of an: (1) emergent phase, (2) construction phase, and (3) confirmatory phase. A concurrent triangulated mixed method multilevel cross-sectional study design was described. The protocol also described in detail the Theory Construction Phase which will be presented here. The Theory Construction Phase will include: (1) defining stratified levels; (2) analytic resolution; (3) abductive reasoning; (4) comparative analysis (triangulation); (5) retroduction; (6) postulate and proposition development; (7) comparison and assessment of theories; and (8) conceptual frameworks and model development. The stratified levels of analysis in this study were predominantly social and psychological. The abductive analysis used the theoretical frames of: Stress Process; Social Isolation; Social Exclusion; Social Services; Social Capital, Acculturation Theory and Global-economic level mechanisms. Realist propositions are presented for each analysis of triangulated data. Inference to best explanation is used to assess and compare theories. A conceptual framework of maternal depression, stress and context is presented that includes examples of mechanisms at psychological, social, cultural and global-economic levels. Stress was identified as a necessary mechanism that has the tendency to cause several outcomes including depression, anxiety, and health harming behaviours. The conceptual framework subsequently included conditional mechanisms identified through the retroduction including the stressors of isolation and expectations and buffers of social support and trust. The meta-theory of critical realism is used here to generate and construct social epidemiological theory using stratified ontology and both abductive and retroductive analysis. The findings will be applied to the

  19. Temperature gradient method for lipid phase diagram construction using time-resolved x-ray diffraction

    International Nuclear Information System (INIS)

    Caffrey, M.; Hing, F.S.

    1987-01-01

    A method that enables temperature-composition phase diagram construction at unprecedented rates is described and evaluated. The method involves establishing a known temperature gradient along the length of a metal rod. Samples of different compositions contained in long, thin-walled capillaries are positioned lengthwise on the rod and equilibrated such that the temperature gradient is communicated into the sample. The sample is then moved through a focused, monochromatic synchrotron-derived x-ray beam and the image-intensified diffraction pattern from the sample is recorded on videotape continuously in live-time as a function of position and, thus, temperature. The temperature at which the diffraction pattern changes corresponds to a phase boundary, and the phase(s) existing (coexisting) on either side of the boundary can be identified on the basis of the diffraction pattern. Repeating the measurement on samples covering the entire composition range completes the phase diagram. These additional samples can be conveniently placed at different locations around the perimeter of the cylindrical rod and rotated into position for diffraction measurement. Temperature-composition phase diagrams for the fully hydrated binary mixtures, dimyristoylphosphatidylcholine (DMPC)/dipalmitoylphosphatidylcholine (DPPC) and dipalmitoylphosphatidylethanolamine (DPPE)/DPPC, have been constructed using the new temperature gradient method. They agree well with and extend the results obtained by other techniques. In the DPPE/DPPC system structural parameters as a function of temperature in the various phases including the subgel phase are reported. The potential limitations of this steady-state method are discussed

  20. Evidence reasoning method for constructing conditional probability tables in a Bayesian network of multimorbidity.

    Science.gov (United States)

    Du, Yuanwei; Guo, Yubin

    2015-01-01

    The intrinsic mechanism of multimorbidity is difficult to recognize and prediction and diagnosis are difficult to carry out accordingly. Bayesian networks can help to diagnose multimorbidity in health care, but it is difficult to obtain the conditional probability table (CPT) because of the lack of clinically statistical data. Today, expert knowledge and experience are increasingly used in training Bayesian networks in order to help predict or diagnose diseases, but the CPT in Bayesian networks is usually irrational or ineffective for ignoring realistic constraints especially in multimorbidity. In order to solve these problems, an evidence reasoning (ER) approach is employed to extract and fuse inference data from experts using a belief distribution and recursive ER algorithm, based on which evidence reasoning method for constructing conditional probability tables in Bayesian network of multimorbidity is presented step by step. A multimorbidity numerical example is used to demonstrate the method and prove its feasibility and application. Bayesian network can be determined as long as the inference assessment is inferred by each expert according to his/her knowledge or experience. Our method is more effective than existing methods for extracting expert inference data accurately and is fused effectively for constructing CPTs in a Bayesian network of multimorbidity.

  1. Methods for constructing exact solutions of partial differential equations mathematical and analytical techniques with applications to engineering

    CERN Document Server

    Meleshko, Sergey V

    2005-01-01

    Differential equations, especially nonlinear, present the most effective way for describing complex physical processes. Methods for constructing exact solutions of differential equations play an important role in applied mathematics and mechanics. This book aims to provide scientists, engineers and students with an easy-to-follow, but comprehensive, description of the methods for constructing exact solutions of differential equations.

  2. Proximity Works and carry-over method without ground improvement in the construction works by shield method

    Energy Technology Data Exchange (ETDEWEB)

    Watanabe, Jun; Taki, Hideharu; Teraoka, Yoshiaki [Chubu Electric Power Co., Inc., Nagoya (Japan)

    1989-06-01

    Chubu Electric Power Co. is promoting to introduce ultrahigh-voltage transmission line into Nagoya City in order to supply electric power to the central area of the city. As a part of this project, the company constructed the tunnel extending 1400m long in the central area of Nagoya City by shield method. In the area around the route of this tunnel, high buildings for residence stand close together, the traffic is heavy, and also four railway lines cross over the tunnel. The important points of this construction are curved surface works of the tunnel at the main intersections, crosscutting works at the major trunk railway lines, and shield carry-over method. The finished inside diameter of the tunnel is 3.6m and it is protected by the primary lining of 175mm in thickness and by the secondary one of 200mm in thickness. As the construction is performed at the intersections where traffic is heavy, or required curved surface works, it must be carried out without the process of ground improvement such as chemical injection. Therefore, excavation was performed through high strength stratum, utilizing the strength of soil itself. At the portion where the tunnel runs across main railway line, it was taken in account that high strength stratum should remain as cover rock, and excavation was performed beneath the rock. At the end portion of shield, soil pile column with H-formed steel and steel bulk head were used as means of landslide protection. Thus, the ease operation and economic execution of works were realized. 1 ref., 14 figs., 2 tabs.

  3. Thermal Infrared Remote Sensing for Analysis of Landscape Ecological Processes: Methods and Applications

    Science.gov (United States)

    Quattrochi, Dale A.; Luvall, Jeffrey C.

    1998-01-01

    Thermal Infrared (TIR) remote sensing data can provide important measurements of surface energy fluxes and temperatures, which are integral to understanding landscape processes and responses. One example of this is the successful application of TIR remote sensing data to estimate evapotranspiration and soil moisture, where results from a number of studies suggest that satellite-based measurements from TIR remote sensing data can lead to more accurate regional-scale estimates of daily evapotranspiration. With further refinement in analytical techniques and models, the use of TIR data from airborne and satellite sensors could be very useful for parameterizing surface moisture conditions and developing better simulations of landscape energy exchange over a variety of conditions and space and time scales. Thus, TIR remote sensing data can significantly contribute to the observation, measurement, and analysis of energy balance characteristics (i.e., the fluxes and redistribution of thermal energy within and across the land surface) as an implicit and important aspect of landscape dynamics and landscape functioning. The application of TIR remote sensing data in landscape ecological studies has been limited, however, for several fundamental reasons that relate primarily to the perceived difficulty in use and availability of these data by the landscape ecology community, and from the fragmentation of references on TIR remote sensing throughout the scientific literature. It is our purpose here to provide evidence from work that has employed TIR remote sensing for analysis of landscape characteristics to illustrate how these data can provide important data for the improved measurement of landscape energy response and energy flux relationships. We examine the direct or indirect use of TIR remote sensing data to analyze landscape biophysical characteristics, thereby offering some insight on how these data can be used more robustly to further the understanding and modeling of

  4. Development of methods for remediation of artificial polluted soils and improvement of soils for ecologically clean agricultural production systems

    International Nuclear Information System (INIS)

    Bogachev, V.; Adrianova, G.; Zaitzev, V.; Kalinin, V.; Kovalenko, E.; Makeev, A.; Malikova, L.; Popov, Yu.; Savenkov, A.; Shnyakina, V.

    1996-01-01

    The purpose of the research: Development of methods for the remediation of artificial polluted soils and the improvement of polluted lands to ecologically clean agricultural production.The following tasks will be implemented in this project to achieve viable practical solutions: - To determine the priority pollutants, their ecological pathways, and sources of origin. - To form a supervised environmental monitoring data bank throughout the various geo system conditions. - To evaluate the degree of the bio geo system pollution and the influence on the health of the local human populations. - To establish agricultural plant tolerance levels to the priority pollutants. - To calculate the standard concentrations of the priority pollutants for main agricultural plant groups. - To develop a soil remediation methodology incorporating the structural, functional geo system features. - To establish a territory zone division methodology in consideration of the degree of component pollution, plant tolerance to pollutants, plant production conditions, and human health. - Scientific grounding of the soil remediation proposals and agricultural plant material introductions with soil pollution levels and relative plant tolerances to pollutants. Technological Means, Methods, and Approaches Final proposed solutions will be based upon geo system and ecosystem approaches and methodologies. The complex ecological valuation methods of the polluted territories will be used in this investigation. Also, laboratory culture in vitro, application work, and multi-factor field experiments will be conducted. The results will be statistically analyzed using appropriate methods. Expected Results Complex biogeochemical artificial province assessment according to primary pollutant concentrations. Development of agricultural plant tolerance levels relative to the priority pollutants. Assessment of newly introduced plant materials that may possess variable levels of pollution tolerance. Remediation

  5. A Differential Scanning Calorimetry Method for Construction of Continuous Cooling Transformation Diagram of Blast Furnace Slag

    Science.gov (United States)

    Gan, Lei; Zhang, Chunxia; Shangguan, Fangqin; Li, Xiuping

    2012-06-01

    The continuous cooling crystallization of a blast furnace slag was studied by the application of the differential scanning calorimetry (DSC) method. A kinetic model describing the correlation between the evolution of the degree of crystallization with time was obtained. Bulk cooling experiments of the molten slag coupled with numerical simulation of heat transfer were conducted to validate the results of the DSC methods. The degrees of crystallization of the samples from the bulk cooling experiments were estimated by means of the X-ray diffraction (XRD) and the DSC method. It was found that the results from the DSC cooling and bulk cooling experiments are in good agreement. The continuous cooling transformation (CCT) diagram of the blast furnace slag was constructed according to crystallization kinetic model and experimental data. The obtained CCT diagram characterizes with two crystallization noses at different temperature ranges.

  6. Modern methods of cost saving of the production activity in construction

    Science.gov (United States)

    Silka, Dmitriy

    2017-10-01

    Every time economy faces recession, cost saving questions acquire increased urgency. This article shows how companies of the construction industry have switched to the new kind of economic relations over recent years. It is specified that the dominant type of economic relations does not allow to quickly reorient on the necessary tools in accordance with new requirements of economic activity. Successful experience in the new environment becomes demanded. Cost saving methods, which were proven in other industries, are offered for achievement of efficiency and competitiveness of the companies. Analysis is performed on the example of the retail sphere, which, according to the authoritative analytical reviews, is extremely innovative on both local and world economic levels. At that, methods, based on the modern unprecedentedly high opportunities of communications and informational exchange took special place among offered methods.

  7. A method for estimation of fatigue properties from hardness of materials through construction of expert system

    International Nuclear Information System (INIS)

    Jeon, Woo Soo; Song, Ji Ho

    2001-01-01

    An expert system for estimation of fatigue properties from simple tensile data of material is developed, considering nearly all important estimation methods proposed so far, i.e., 7 estimation methods. The expert system is developed to utilize for the case of only hardness data available. The knowledge base is constructed with production rules and frames using an expert system shell, UNIK. Forward chaining is employed as a reasoning method. The expert system has three functions including the function to update the knowledge base. The performance of the expert system is tested using the 54 ε-N curves consisting of 381 ε-N data points obtained for 22 materials. It is found that the expert system developed has excellent performance especially for steel materials, and reasonably good for aluminum alloys

  8. Pursuing an ecological component for the Effect Factor in LCIA methods

    DEFF Research Database (Denmark)

    Cosme, Nuno Miguel Dias; Bjørn, Anders; Rosenbaum, Ralph K.

    have also been altered by past impacts. Model frameworks are usually built on stability, linearity of causality and expectation of a safe return to stable states if the stressor is minimised. However, the command-and-control paradigm has resulted in the erosion of natural resources and species...... EC50-based) or 1 (assuming that continuous stress affects reproduction rate), but these are all based on biological/physiological responses and do not add a true ecological component to the impact. Such factor simply changes the HC50 by 1 or 0.3 log units. A stressor with equal intensity in two...

  9. Development of knowledge acquisition methods for knowledge base construction for autonomous plants

    Energy Technology Data Exchange (ETDEWEB)

    Yoshikawa, S. [Power Reactor and Nuclear Fuel Development Corp., Oarai, Ibaraki (Japan). Oarai Engineering Center; Sasajima, M.; Kitamura, Y.; Ikeda, M.; Mizoguchi, R.

    1993-03-01

    In order to enhance safety and reliability of nuclear plant operation, it is strongly desired to construct diagnostic knowledge base without lacking, contradiction, and description inconsistency. Nowadays, an advanced method Knowledge Compiler` has been studied to acquire diagnostic knowledge, mainly based on qualitative reasoning technique, without accumulating heuristics by interviews. Until now, 2 methods to suppress the ambiguity observed when qualitative reasoning mechanism were applied to heat transport systems of nuclear power plants: In the first method, qualitative values are allocated to the system variables along with the causality direction, avoiding contradictions among plural variables in each qualitative constraint describing knowledge of deviation propagation, heat balance, or energy conservation. In the second method, all the qualitative information is represented as a set of simultaneous qualitative equations. And, an appropriate subset is selected so that the qualitative solutions of unknowns in this subset can be derived independently of the remaining part. A contrary method is applied for the selected subset to derive local solutions. Then the problem size is reduced by substituting solutions of the subset, in a recursive manner. In the previous report on this research project, complete computer softwares have been constructed based on these methods, and applied to a 2-loop heat transport system of a nuclear power plant. The detailed results are discussed in this report. In addition, an integrated configuration of diagnostic knowledge generation system of nuclear power plants is proposed, based upon the results and new foundings obtained through the research activities so far, and the future works to overcome remaining problems are also identified. (author)

  10. Preference Construction Processes for Renewable Energies: Assessing the Influence of Sustainability Information and Decision Support Methods

    Directory of Open Access Journals (Sweden)

    Kiyotada Hayashi

    2016-11-01

    Full Text Available Sustainability information and decision support can be two important driving forces for making sustainable transitions in society. However, not enough knowledge is available on the effectiveness of these two factors. Here, we conducted an experimental study to support the hypotheses that acquisition of sustainability information and use of decision support methods consistently construct preferences for renewable power generation technologies that use solar power, wind power, small-scale hydroelectric power, geothermal power, wood biomass, or biogas as energy sources. The sustainability information was prepared using a renewable energy-focused input-output model of Japan and contained life cycle greenhouse gas emissions, electricity generation costs, and job creation. We measured rank-ordered preferences in the following four steps in experimental workshops conducted for municipal officials: provision of (1 energy-source names; (2 sustainability information; (3 additional explanation of public value; and (4 knowledge and techniques about multi-attribute value functions. The degree of changes in preference orders was evaluated using Spearman’s rank correlation coefficient. The consistency of rank-ordered preferences among participants was determined by using the maximum eigenvalue for the coefficient matrix. The results show: (1 the individual preferences evolved drastically in response to the sustainability information and the decision support method; and (2 the rank-ordered preferences were more consistent during the preference construction processes. These results indicate that provision of sustainability information, coupled with decision support methods, is effective for decision making regarding renewable energies.

  11. ESPRIT: A Method for Defining Soluble Expression Constructs in Poorly Understood Gene Sequences.

    Science.gov (United States)

    Mas, Philippe J; Hart, Darren J

    2017-01-01

    Production of soluble, purifiable domains or multi-domain fragments of proteins is a prerequisite for structural biology and other applications. When target sequences are poorly annotated, or when there are few similar sequences available for alignments, identification of domains can be problematic. A method called expression of soluble proteins by random incremental truncation (ESPRIT) addresses this problem by high-throughput automated screening of tens of thousands of enzymatically truncated gene fragments. Rare soluble constructs are identified by experimental screening, and the boundaries revealed by DNA sequencing.

  12. Relativistic extension of the Kay-Moses method for constructing transparent potentials in quantum mechanics

    International Nuclear Information System (INIS)

    Toyama, F.M.; Nogami, Y.; Zhao, Z.

    1993-01-01

    For the Dirac equation in one space dimension with a potential of the Lorentz scalar type, we present a complete solution for the problem of constructing a transparent potential. This is a relativistic extension of the Kay-Moses method which was developed for the nonrelativistic Schroedinger equation. There is an infinite family of transparent potentials. The potentials are all related to solutions of a class of coupled, nonlinear Dirac equations. In addition, it is argued that an admixture of a Lorentz vector component in the potential impairs perfect transparency

  13. Construction of a path of MHD equilibrium solutions by an iterative method

    International Nuclear Information System (INIS)

    Kikuchi, Fumio.

    1979-09-01

    This paper shows a constructive proof of the existence of a path of solutions to a nonlinear eigenvalue problem expressed by -Δu = lambda u + in Ω, and u = -1 on deltaΩ where Ω is a two-dimensional domain with a boundary deltaΩ. This problem arises from the ideal MHD equilibria in tori. The existence proof is based on the principle of contraction mappings, which is widely employed in nonlinear problems such as those associated with bifurcation phenomena. Some comments are also given on the application of the present iteration techniques to numerical method. (author)

  14. [Ecology and ecologies].

    Science.gov (United States)

    Valera, Luca

    2011-01-01

    Ecology (from the Greek words οιχοσ, "house" and λογια "study of") is the science of the "house", since it studies the environments where we live. There are three main ways of thinking about Ecology: Ecology as the study of interactions (between humans and the environment, between humans and living beings, between all living beings, etc.), Ecology as the statistical study of interactions, Ecology as a faith, or rather as a science that requires a metaphysical view. The history of Ecology shows us how this view was released by the label of "folk sense" to gain the epistemological status of science, a science that strives to be interdisciplinary. So, the aim of Ecology is to study, through a scientific methodology, the whole natural world, answering to very different questions, that arise from several fields (Economics, Biology, Sociology, Philosophy, etc.). The plurality of issues that Ecology has to face led, during the Twentieth-century, to branch off in several different "ecologies". As a result, each one of these new approaches chose as its own field a more limited and specific portion of reality.

  15. A constructive nonlinear array (CNA) method for barely visible impact detection in composite materials

    Science.gov (United States)

    Malfense Fierro, Gian Piero; Meo, Michele

    2017-04-01

    Currently there are numerous phased array techniques such as Full Matrix Capture (FMC) and Total Focusing Method (TFM) that provide good damage assessment for composite materials. Although, linear methods struggle to evaluate and assess low levels of damage, while nonlinear methods have shown great promise in early damage detection. A sweep and subtraction evaluation method coupled with a constructive nonlinear array method (CNA) is proposed in order to assess damage specific nonlinearities, address issues with frequency selection when using nonlinear ultrasound imaging techniques and reduce equipment generated nonlinearities. These methods were evaluated using multiple excitation locations on an impacted composite panel with a complex damage (barely visible impact damage). According to various recent works, damage excitation can be accentuated by exciting at local defect resonance (LDR) frequencies; although these frequencies are not always easily determinable. The sweep methodology uses broadband excitation to determine both local defect and material resonances, by assessing local defect generated nonlinearities using a laser vibrometer it is possible to assess which frequencies excite the complex geometry of the crack. The dual effect of accurately determining local defect resonances, the use of an image subtraction method and the reduction of equipment based nonlinearities using CNA result in greater repeatability and clearer nonlinear imaging (NIM).

  16. Methods for conceptualising ‘visual ability’ as a measurable construct in children with cerebral palsy

    Directory of Open Access Journals (Sweden)

    Belinda Deramore Denver

    2017-03-01

    Full Text Available Abstract Background Vision influences functioning and disability of children with cerebral palsy, so there is a growing need for psychometrically robust tools to advance assessment of children’s vision abilities in clinical practice and research. Vision is a complex construct, and in the absence of clarity about this construct it is challenging to know whether valid, reliable measures exist. This study reports a method for conceptualising ‘visual ability’ as a measurable construct. Methods Using the items from 19 assessment tools previously identified in a systematic review, this study used a two-phase process: first, deductive content analysis linked items to the International Classification of Functioning, Disability and Health - Child and Youth version (ICF-CY, and second, vision-specific ‘Activity’-level items were explored using inductive thematic analysis. Results The linking and content analysis identified that existing assessment tools are measuring vision across the ICF-CY domains of Body Functions, Activities and Participation, and Environmental and Personal Factors. Items specifically coded to vision at the Activity level were defined as measuring ‘how vision is used’, and these items form the basis of the conceptualisation that ‘visual ability’ is measurable as a single construct. The thematic analysis led to the identification of 3 categories containing 13 themes that reflect a child’s observable visual behaviours. Seven abilities reflect how a child uses vision: responds or reacts, initiates, maintains or sustains looking, changes or shifts looking, searches, locates or finds, and follows. Four interactions reflect the contexts in which a child uses their vision to purposefully interact: watches and visually interacts with people and faces, objects, over distance, and with hands. Finally, two themes reflect a child’s overall use of vision in daily activities: frequency of use, and efficiency of use

  17. How much of our environment do we need?. MIPS - a measuring method for an ecological economy

    International Nuclear Information System (INIS)

    Schmidt-Bleek, F.; Klueting, R.

    1994-01-01

    This book illustrates how much of our environment we use up with the products and services associated with everyday life, how large the ecological impact of our consume society actually is; we build roads, dams, heavy goods vehicles, warehouses, factories, monocultures and rubbish tips. We take iron ore, sand, gravel, coal oil, water, air and wood from our environment in huge, ever-increasing qualities. Slag heaps, erosion and disrupted water flow are left behind. This man-made materialistic society is altering nature's balance persistently and for the long term. This materialism is no longer ecologically sustainable. We must learn to prosper with less negative environmental impacts. The author has developed a means of measuring the intensity of environmental impact of products, processes and services, based on the material consumed to allow acurate comparisons. In this comprehensible informative book he reveals, for the first time publicly, the measure/formula by means of many practical examples and illustrations to show a way out of the crisis. (orig./UA) [de

  18. Development of Ecological Buildings

    Directory of Open Access Journals (Sweden)

    Andrius Keizikas

    2011-04-01

    Full Text Available The article presents research on ecological buildings and their influence on the constructional sphere. The aim of the paper is to reveal the essence of ecological architecture showing substantial progress and its potential to stimulate architectural and technological growth. The article also describes relations between the ideas of ecological buildings and the ‘passive house’ concepts and aspects of development as well as describes the possibilities of improving building sustainability and energy efficiency. Article in Lithuanian

  19. A Study on remote sensing method for drawing up and utilizing ecological and natural map - concentrated on drawing up of Land Cover Classification Map

    Energy Technology Data Exchange (ETDEWEB)

    Jun, Sung Woo; Chung, Sung Moon [Korea Environment Institute, Seoul (Korea)

    1998-12-01

    The drawing up of ecological and natural map, which is highly efficient using remote exploration method, was promoted in this study. As the first step of drawing up of ecological and natural map, this study is working on the drawing up of Land Cover using as a base map. Through the detailed and sufficient consideration on GAP analysis of USA, CORINE project of EU, and examples in Korea, it studied and proposed the Land Cover Classification system and method suitable for Korea. It will be helpful to draw up ecological and natural map by providing two strategies and principles for land cover classification. 26 refs., 33 figs., 9 tabs.

  20. Fast method of constructing image correlations to build a free network based on image multivocabulary trees

    Science.gov (United States)

    Zhan, Zongqian; Wang, Xin; Wei, Minglu

    2015-05-01

    In image-based three-dimensional (3-D) reconstruction, one topic of growing importance is how to quickly obtain a 3-D model from a large number of images. The retrieval of the correct and relevant images for the model poses a considerable technological challenge. The "image vocabulary tree" has been proposed as a method to search for similar images. However, a significant drawback of this approach is identified in its low time efficiency and barely satisfactory classification result. The method proposed is inspired by, and improves upon, some recent methods. Specifically, vocabulary quality is considered and multivocabulary trees are designed to improve the classification result. A marked improvement was, indeed, observed in our evaluation of the proposed method. To improve time efficiency, graphics processing unit (GPU) computer unified device architecture parallel computation is applied in the multivocabulary trees. The results of the experiments showed that the GPU was three to four times more efficient than the enumeration matching and CPU methods when the number of images is large. This paper presents a reliable reference method for the rapid construction of a free network to be used for the computing of 3-D information.

  1. An Appraisal of Project Procurement Methods in the Nigerian Construction Industry

    Directory of Open Access Journals (Sweden)

    Ujaddughe I.C.

    2010-01-01

    Full Text Available The aim of every client at the beginning of any project is to have at the end of the day a quality structure delivered on time and within budget. However, researches have shown that in most cases this aim is not met. The aim of the study that formed the basis for this paper was to identify and assess procurement methods in use in the Nigerian construction industry and identify the factors that affect the choice of the variants under the traditional and the non-conventional procurement methods. Data were collected using well-structured questionnaires administered to professionals in Lagos metropolis. Data collected were analyzed using descriptive and inferential statistics. The study reveals that the variants of traditional method of contract procurement are the most adopted in project execution in Nigeria. In making choice of procurement method, the study reveals that project completion at estimated time ranks as the highest factor considered for traditional method, while quality assurance ranks highest with non-conventional method.

  2. Ecological analyses and applications

    International Nuclear Information System (INIS)

    Brocksen, R.W.

    1977-01-01

    Progress is reported on the following: analysis of ecological impacts of construction and operation of nuclear power plants; fossil energy environmental project; ecological analysis of geothermal energy development; HUD modular integrated utility systems; expansion of uranium enrichment facilities at Portsmouth; environmental standard review plans; environmental assessment of cooling reservoirs; and analysis of fish impingement at power plants in the southeastern United States

  3. A novel method for identifying settings for well-motivated ecologic studies of cancer

    Science.gov (United States)

    Stang, Andreas; Kowall, Bernd; Rusner, Carsten; Trabert, Britton; Bray, Freddie; Schüz, Joachim; McGlynn, Katherine A.; Kuss, Oliver

    2016-01-01

    A low within-country variability and a large between-country variability in cancer incidence may indicate that ecologic factors are involved in the etiology of the disease. The aim of this study is to explore the within- and between-country variability of cancer incidence to motivate high-quality ecologic studies. We extracted age-standardized incidence rate estimates (world standard population) from 135 regions for the 10 most frequent invasive cancers in Europe for non-Hispanic white populations from Cancer Incidence in Five Continents, Volume X. We fitted weighted multilevel Poisson regression models with random country effects for each cancer and sex. We estimated intraclass correlation coefficients (ICC) and 95% confidence intervals (95%CI). A high ICC indicates a low within and a high between-country variability of rates. The two cancer sites with the highest ICC among men were prostate cancer (0.96, 95%CI: 0.92–0.99) and skin melanoma (0.78, 0.64–0.93). Among women, high ICC were observed for lung cancer (0.84, 0.73–0.95) and breast cancer (0.80, 0.69–0.91). The two most prominent sex differences for ICC occurred for cancers of the head and neck (men: 0.70, 0.55–0.85, women: 0.19, 0.08–0.30) and breast cancer (men: 0.04, 0.01–0.07, women: 0.80, 0.69–0.91). ICCs were relatively low for pancreatic cancer (men: 0.23, 0.10–0.35; women: 0.13, 0.04–0.21) and leukemia (men: 0.12, 0.04–0.21; women: 0.08, 0.02–0.14). For cancers with high ICC for which systematic factors of the health care system, screening and diagnostic activities are not plausible explanations for between-country variations in incidence, cross-country sex-specific ecologic studies may be especially promising. PMID:26595447

  4. A method to construct covariance files in ENDF/B format for criticality safety applications

    International Nuclear Information System (INIS)

    Naberejnev, D.G.; Smith, D.L.

    1999-01-01

    Argonne National Laboratory is providing support for a criticality safety analysis project that is being performed at Oak Ridge National Laboratory. The ANL role is to provide the covariance information needed by ORNL for this project. The ENDF/B-V evaluation is being used for this particular criticality analysis. In this evaluation, covariance information for several isotopes or elements of interest to this analysis is either not given or needs to be reconsidered. For some required materials, covariance information does not exist in ENDF/B-V: 233 U, 236 U, Zr, Mg, Gd, and Hf. For others, existing covariance information may need to be re-examined in light of the newer ENDF/B-V evaluation and recent experimental data. In this category are the following materials: 235 U, 238 U, 239 Pu, 240 Pu, 241 Pu, Fe, H, C, N, O, Al, Si, and B. A reasonable estimation of the fractional errors for various evaluated neutron cross sections from ENDF/B-V can be based on the comparisons between the major more recent evaluations including ENDF/B-VI, JENDL3.2, BROND2.2, and JEF2.2, as well as a careful examination of experimental data. A reasonable method to construct correlation matrices is proposed here. Coupling both of these considerations suggests a method to construct covariances files in ENDF/B format that can be used to express uncertainties for specific ENDF/B-V cross sections

  5. Constructing a Measurement Method of Differences in Group Preferences Based on Relative Entropy

    Directory of Open Access Journals (Sweden)

    Shiyu Zhang

    2017-01-01

    Full Text Available In the research and data analysis of the differences involved in group preferences, conventional statistical methods cannot reflect the integrity and preferences of human minds; in particular, it is difficult to exclude humans’ irrational factors. This paper introduces a preference amount model based on relative entropy theory. A related expansion is made based on the characteristics of the questionnaire data, and we also construct the parameters to measure differences in the data distribution of different groups on the whole. In this paper, this parameter is called the center distance, and it effectively reflects the preferences of human minds. Using the survey data of securities market participants as an example, this paper analyzes differences in market participants’ attitudes toward the effectiveness of securities regulation. Based on this method, differences between groups that were overlooked by analysis of variance are found, and certain aspects obscured by general data characteristics are also found.

  6. Construction Method of the Topographical Features Model for Underwater Terrain Navigation

    Directory of Open Access Journals (Sweden)

    Wang Lihui

    2015-09-01

    Full Text Available Terrain database is the reference basic for autonomous underwater vehicle (AUV to implement underwater terrain navigation (UTN functions, and is the important part of building topographical features model for UTN. To investigate the feasibility and correlation of a variety of terrain parameters as terrain navigation information metrics, this paper described and analyzed the underwater terrain features and topography parameters calculation method. Proposing a comprehensive evaluation method for terrain navigation information, and constructing an underwater navigation information analysis model, which is associated with topographic features. Simulation results show that the underwater terrain features, are associated with UTN information directly or indirectly, also affect the terrain matching capture probability and the positioning accuracy directly.

  7. Islamic geometric patterns their historical development and traditional methods of construction

    CERN Document Server

    Bonner, Jay

    2017-01-01

    The main focus of this unique book is an in-depth examination of the polygonal technique; the primary method used by master artists of the past in creating Islamic geometric patterns. The author details the design methodology responsible for this all-but-lost art form and presents evidence for its use from the historical record, both of which are vital contributions to the understanding of this ornamental tradition. Additionally, the author examines the historical development of Islamic geometric patterns, the significance of geometric design within the broader context of Islamic ornament as a whole, the formative role that geometry plays throughout the Islamic ornamental arts (including calligraphy, the floral idiom, dome decoration, geometric patterns, and more), and the underexamined question of pattern classification. Featuring over 600 beautiful color images, Islamic Geometric Patterns: Their Historical Development and Traditional Methods of Construction is a valuable addition to the literature of Islam...

  8. Using GIS-based methods of multicriteria analysis to construct socio-economic deprivation indices

    Directory of Open Access Journals (Sweden)

    Hayes Michael V

    2007-05-01

    Full Text Available Abstract Background Over the past several decades researchers have produced substantial evidence of a social gradient in a variety of health outcomes, rising from systematic differences in income, education, employment conditions, and family dynamics within the population. Social gradients in health are measured using deprivation indices, which are typically constructed from aggregated socio-economic data taken from the national census – a technique which dates back at least until the early 1970's. The primary method of index construction over the last decade has been a Principal Component Analysis. Seldom are the indices constructed from survey-based data sources due to the inherent difficulty in validating the subjectivity of the response scores. We argue that this very subjectivity can uncover spatial distributions of local health outcomes. Moreover, indication of neighbourhood socio-economic status may go underrepresented when weighted without expert opinion. In this paper we propose the use of geographic information science (GIS for constructing the index. We employ a GIS-based Order Weighted Average (OWA Multicriteria Analysis (MCA as a technique to validate deprivation indices that are constructed using more qualitative data sources. Both OWA and traditional MCA are well known and used methodologies in spatial analysis but have had little application in social epidemiology. Results A survey of British Columbia's Medical Health Officers (MHOs was used to populate the MCA-based index. Seven variables were selected and weighted based on the survey results. OWA variable weights assign both local and global weights to the index variables using a sliding scale, producing a range of variable scenarios. The local weights also provide leverage for controlling the level of uncertainty in the MHO response scores. This is distinct from traditional deprivation indices in that the weighting is simultaneously dictated by the original respondent scores

  9. A robust method of thin plate spline and its application to DEM construction

    Science.gov (United States)

    Chen, Chuanfa; Li, Yanyan

    2012-11-01

    In order to avoid the ill-conditioning problem of thin plate spline (TPS), the orthogonal least squares (OLS) method was introduced, and a modified OLS (MOLS) was developed. The MOLS of TPS (TPS-M) can not only select significant points, termed knots, from large and dense sampling data sets, but also easily compute the weights of the knots in terms of back-substitution. For interpolating large sampling points, we developed a local TPS-M, where some neighbor sampling points around the point being estimated are selected for computation. Numerical tests indicate that irrespective of sampling noise level, the average performance of TPS-M can advantage with smoothing TPS. Under the same simulation accuracy, the computational time of TPS-M decreases with the increase of the number of sampling points. The smooth fitting results on lidar-derived noise data indicate that TPS-M has an obvious smoothing effect, which is on par with smoothing TPS. The example of constructing a series of large scale DEMs, located in Shandong province, China, was employed to comparatively analyze the estimation accuracies of the two versions of TPS and the classical interpolation methods including inverse distance weighting (IDW), ordinary kriging (OK) and universal kriging with the second-order drift function (UK). Results show that regardless of sampling interval and spatial resolution, TPS-M is more accurate than the classical interpolation methods, except for the smoothing TPS at the finest sampling interval of 20 m, and the two versions of kriging at the spatial resolution of 15 m. In conclusion, TPS-M, which avoids the ill-conditioning problem, is considered as a robust method for DEM construction.

  10. The causal pie model: an epidemiological method applied to evolutionary biology and ecology.

    Science.gov (United States)

    Wensink, Maarten; Westendorp, Rudi G J; Baudisch, Annette

    2014-05-01

    A general concept for thinking about causality facilitates swift comprehension of results, and the vocabulary that belongs to the concept is instrumental in cross-disciplinary communication. The causal pie model has fulfilled this role in epidemiology and could be of similar value in evolutionary biology and ecology. In the causal pie model, outcomes result from sufficient causes. Each sufficient cause is made up of a "causal pie" of "component causes". Several different causal pies may exist for the same outcome. If and only if all component causes of a sufficient cause are present, that is, a causal pie is complete, does the outcome occur. The effect of a component cause hence depends on the presence of the other component causes that constitute some causal pie. Because all component causes are equally and fully causative for the outcome, the sum of causes for some outcome exceeds 100%. The causal pie model provides a way of thinking that maps into a number of recurrent themes in evolutionary biology and ecology: It charts when component causes have an effect and are subject to natural selection, and how component causes affect selection on other component causes; which partitions of outcomes with respect to causes are feasible and useful; and how to view the composition of a(n apparently homogeneous) population. The diversity of specific results that is directly understood from the causal pie model is a test for both the validity and the applicability of the model. The causal pie model provides a common language in which results across disciplines can be communicated and serves as a template along which future causal analyses can be made.

  11. 太湖生态补偿方法及机制研究%Method and Mechanism of Ecological Compensation of Taihu Lake

    Institute of Scientific and Technical Information of China (English)

    何建兵; 吴永祥; 王高旭; 侯保灯; 周宏伟; 汤绍青; 赵宏臻

    2011-01-01

    针对太湖流域自然特征和社会经济条件,在分析太湖生态补偿驱动因素的基础上,提出了太湖生态补偿范围和内容,分析了太湖开发利用与生态保护的损益关系,以生态补偿基金为媒介简化了太湖生态补偿关系,基于共建共享理念构建了太湖生态补偿测算模型,依据现有太湖管理模式提出了太湖生态补偿模式、机制及政策的建议.%According to the natural characteristics and socio-economic conditions of Taihu Lake Basin, the scope and content of ecological compensation in Taihu Lake are proposed based on the analysis of its driving factors. And the benefit-loss relationship between the utilization and the ecological protection in Taihu Lake is analyzed. Then the ecological compensation relations are simplified by taking ecological compensation fund as the medium, and an ecological compensation calculation model of Taihu Lake is established on the basis of co-construction and sharing idea. Finally, the pattern, mechanism and policy of ecological compensation in Taihu Lake are suggested according to the existing management mode in this area.

  12. The study of combining Latin Hypercube Sampling method and LU decomposition method (LULHS method) for constructing spatial random field

    Science.gov (United States)

    WANG, P. T.

    2015-12-01

    Groundwater modeling requires to assign hydrogeological properties to every numerical grid. Due to the lack of detailed information and the inherent spatial heterogeneity, geological properties can be treated as random variables. Hydrogeological property is assumed to be a multivariate distribution with spatial correlations. By sampling random numbers from a given statistical distribution and assigning a value to each grid, a random field for modeling can be completed. Therefore, statistics sampling plays an important role in the efficiency of modeling procedure. Latin Hypercube Sampling (LHS) is a stratified random sampling procedure that provides an efficient way to sample variables from their multivariate distributions. This study combines the the stratified random procedure from LHS and the simulation by using LU decomposition to form LULHS. Both conditional and unconditional simulations of LULHS were develpoed. The simulation efficiency and spatial correlation of LULHS are compared to the other three different simulation methods. The results show that for the conditional simulation and unconditional simulation, LULHS method is more efficient in terms of computational effort. Less realizations are required to achieve the required statistical accuracy and spatial correlation.

  13. THE SIMULATION DIAGNOSTIC METHODS AND REGENERATION WAYS OF REINFORCED - CONCRETE CONSTRUCTIONS OF BRIDGES IN PROVIDING THEIR OPERATING RELIABILITY AND LONGEVITY

    Directory of Open Access Journals (Sweden)

    B. V. Savchinskiy

    2010-03-01

    Full Text Available On the basis of analysis of existing diagnostic methods and regeneration ways of reinforced-concrete constructions of bridges the recommendations on introduction of new modern technologies of renewal of reinforced-concrete constructions of bridges in providing their operating reliability and longevity are offered.

  14. THE SIMULATION DIAGNOSTIC METHODS AND REGENERATION WAYS OF REINFORCED - CONCRETE CONSTRUCTIONS OF BRIDGES IN PROVIDING THEIR OPERATING RELIABILITY AND LONGEVITY

    OpenAIRE

    B. V. Savchinskiy

    2010-01-01

    On the basis of analysis of existing diagnostic methods and regeneration ways of reinforced-concrete constructions of bridges the recommendations on introduction of new modern technologies of renewal of reinforced-concrete constructions of bridges in providing their operating reliability and longevity are offered.

  15. Construction Method Study For Installation Of A Large Riser In A Single-Shell Tank

    International Nuclear Information System (INIS)

    Adkisson, D.A.

    2010-01-01

    This study evaluates and identifies a construction method for cutting a hole in a single-shell tank dome. This study also identifies and evaluates vendors for performing the cut. Single-shell tanks (SST) in the 241-C tank farm are currently being retrieved using various retrieval technologies (e.g., modified sluicing). The Hanford Federal Facility Agreement and Consent Order require that the SSTs be retrieved to less than 360 cubic feet of radioactive waste. The current technologies identified and deployed for tank retrieval have not been able to retrieve waste in accordance with the Hanford Federal Facility Agreement and Consent Order. As such, alternative retrieval systems have been proposed and are currently under construction that will have the ability to retrieve waste to this defined level. The proposed retrieval systems will not fit down existing risers. New risers will need to be installed to provide the retrieval systems access to the inside of the SSTs. The purpose of this study is two-fold. The first objective is to identify multiple concrete cutting technologies and perform an initial pre-screening, evaluate the technologies identified for more in-depth analysis, and recommend a technology/methodology for cutting a hole in the tank dome. The identified/pre-screened methods will be evaluated based on the following criteria: (1) Maturity/complexity; (2) Waste generation; (3) Safety; (4) Cost; and (5) Schedule. Once the preferred method is identified to cut the hole in the tank dome, the second objective is to identify, evaluate, and recommend a vendor for the technology selected that will perform the cutting process.

  16. Thematic, conceptual and iconic metamorphosis: the construction of a morphological history epistemological method

    Directory of Open Access Journals (Sweden)

    Maurício de Carvalho Ramos

    2015-12-01

    Full Text Available In this essay, I propose the construction of an epistemological historical method through a morphological perspective. That involves the elaboration of a genetic rational process of conceptualization in which problems, themes and concepts organize in historical expressions increasingly more objective and determinated. Such expressions should be articulated generating a continuum of metamorphosis of a concept or conceptual core. This continuum should be capable of conferring intelligibility for scientific culture units without restrictions of spatial, temporal and conceptual amplitude. The connection of morphological and historical components that I propose is based on the results as well as the method used by Carlo Ginzburg in Myths, emblems and signs, especially in High and low: the theme of forbidden knowledge in the sixteenth and seventeenth centuries. After presenting a characterization of the minimal components of the historical epistemological method, I will start to incorporate elements of Ginsburg’s historical morphology through a dialogue in which I’ll try to understand how the author proceeds methodically and conceptually in his investigation. Finally, through a preliminary study of an alchemical emblem in which Hermes is the central figure, I will make a morphological experiment of application of this procedure to the scope of the scientific culture of chemistry

  17. On a method for constructing the Lax pairs for nonlinear integrable equations

    International Nuclear Information System (INIS)

    Habibullin, I T; Poptsova, M N; Khakimova, A R

    2016-01-01

    We suggest a direct algorithm for searching the Lax pairs for nonlinear integrable equations. It is effective for both continuous and discrete models. The first operator of the Lax pair corresponding to a given nonlinear equation is found immediately, coinciding with the linearization of the considered nonlinear equation. The second one is obtained as an invariant manifold to the linearized equation. A surprisingly simple relation between the second operator of the Lax pair and the recursion operator is discussed: the recursion operator can immediately be found from the Lax pair. Examples considered in the article are convincing evidence that the found Lax pairs differ from the classical ones. The examples also show that the suggested objects are true Lax pairs which allow the construction of infinite series of conservation laws and hierarchies of higher symmetries. In the case of the hyperbolic type partial differential equation our algorithm is slightly modified; in order to construct the Lax pairs from the invariant manifolds we use the cutting off conditions for the corresponding infinite Laplace sequence. The efficiency of the method is illustrated by application to some equations given in the Svinolupov–Sokolov classification list for which the Lax pairs and the recursion operators have not been found earlier. (paper)

  18. Contact dermatitis is an unrecognized problem in the construction industry: Comparison of four different assessment methods.

    Science.gov (United States)

    Timmerman, Johan G; Heederik, Dick; Spee, Ton; van Rooy, Frits G; Krop, Esmeralda J M; Rustemeyer, Thomas; Smit, Lidwien A M

    2017-10-01

    A high contact dermatitis symptoms prevalence has been observed in Dutch construction workers. Contact dermatitis was diagnosed by an expert panel using questionnaire data and photographs of 751 subjects' hands. A subset was evaluated by two occupational physicians. Their diagnoses were compared to those of the expert panel. In addition, two self-reported questionnaire-based assessment methods were compared to the expert panel evaluation. Associations between contact dermatitis and determinants were assessed using log-binomial regression analysis. Contact dermatitis prevalence was high: 61.4% (expert panel's diagnosis) and 32.9% (self-reported). Agreement between occupational physicians and the expert panel was low but increased after training. Washing hands with solvents and performing job-related tasks at home were related to contact dermatitis. Contact dermatitis prevalence among construction workers is high. Recognition of contact dermatitis by occupational physicians is poor but can be improved by training. Awareness of skin disorders should be raised. © 2017 Wiley Periodicals, Inc.

  19. Non invasive methods for genetic analysis applied to ecological and behavioral studies in Latino-America

    Directory of Open Access Journals (Sweden)

    Susana González

    2007-07-01

    Full Text Available Documenting the presence and abundance of the neotropical mammals is the first step for understanding their population ecology, behavior and genetic dynamics in designing conservation plans. The combination of field research with molecular genetics techniques are new tools that provide valuable biological information avoiding the disturbance in the ecosystems, trying to minimize the human impact in the process to gather biological information. The objective of this paper is to review the available non invasive sampling techniques that have been used in Neotropical mammal studies to apply to determine the presence and abundance, population structure, sex ratio, taxonomic diagnostic using mitochondrial markers, and assessing genetic variability using nuclear markers. There are a wide range of non invasive sampling techniques used to determine the species identification that inhabit an area such as searching for tracks, feces, and carcasses. Other useful equipment is the camera traps that can generate an image bank that can be valuable to assess species presence and abundance by morphology. With recent advances in molecular biology, it is now possible to use the trace amounts of DNA in feces and amplify it to analyze the species diversity in an area, and the genetic variability at intraspecific level. This is particularly helpful in cases of sympatric and cryptic species in which morphology failed to diagnose the taxonomic status of several species of brocket deer of the genus Mazama.

  20. Unraveling microbial ecology of industrial-scale Kombucha fermentations by metabarcoding and culture-based methods.

    Science.gov (United States)

    Coton, Monika; Pawtowski, Audrey; Taminiau, Bernard; Burgaud, Gaëtan; Deniel, Franck; Coulloumme-Labarthe, Laurent; Fall, Abdoulaye; Daube, Georges; Coton, Emmanuel

    2017-05-01

    Kombucha, historically an Asian tea-based fermented drink, has recently become trendy in Western countries. Producers claim it bears health-enhancing properties that may come from the tea or metabolites produced by its microbiome. Despite its long history of production, microbial richness and dynamics have not been fully unraveled, especially at an industrial scale. Moreover, the impact of tea type (green or black) on microbial ecology was not studied. Here, we compared microbial communities from industrial-scale black and green tea fermentations, still traditionally carried out by a microbial biofilm, using culture-dependent and metabarcoding approaches. Dominant bacterial species belonged to Acetobacteraceae and to a lesser extent Lactobacteriaceae, while the main identified yeasts corresponded to Dekkera, Hanseniaspora and Zygosaccharomyces during all fermentations. Species richness decreased over the 8-day fermentation. Among acetic acid bacteria, Gluconacetobacter europaeus, Gluconobacter oxydans, G. saccharivorans and Acetobacter peroxydans emerged as dominant species. The main lactic acid bacteria, Oenococcus oeni, was strongly associated with green tea fermentations. Tea type did not influence yeast community, with Dekkera bruxellensis, D. anomala, Zygosaccharomyces bailii and Hanseniaspora valbyensis as most dominant. This study unraveled a distinctive core microbial community which is essential for fermentation control and could lead to Kombucha quality standardization. © FEMS 2017. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  1. Constructing Tissue Microarrays: Protocols and Methods Considering Potential Advantages and Disadvantages for Downstream Use.

    Science.gov (United States)

    Bingle, Lynne; Fonseca, Felipe P; Farthing, Paula M

    2017-01-01

    Tissue microarrays were first constructed in the 1980s but were used by only a limited number of researchers for a considerable period of time. In the last 10 years there has been a dramatic increase in the number of publications describing the successful use of tissue microarrays in studies aimed at discovering and validating biomarkers. This, along with the increased availability of both manual and automated microarray builders on the market, has encouraged even greater use of this novel and powerful tool. This chapter describes the basic techniques required to build a tissue microarray using a manual method in order that the theory behind the practical steps can be fully explained. Guidance is given to ensure potential disadvantages of the technique are fully considered.

  2. CONSTRUCTION THEORY AND NOISE ANALYSIS METHOD OF GLOBAL CGCS2000 COORDINATE FRAME

    Directory of Open Access Journals (Sweden)

    Z. Jiang

    2018-04-01

    Full Text Available The definition, renewal and maintenance of geodetic datum has been international hot issue. In recent years, many countries have been studying and implementing modernization and renewal of local geodetic reference coordinate frame. Based on the precise result of continuous observation for recent 15 years from state CORS (continuously operating reference system network and the mainland GNSS (Global Navigation Satellite System network between 1999 and 2007, this paper studies the construction of mathematical model of the Global CGCS2000 frame, mainly analyzes the theory and algorithm of two-step method for Global CGCS2000 Coordinate Frame formulation. Finally, the noise characteristic of the coordinate time series are estimated quantitatively with the criterion of maximum likelihood estimation.

  3. Unsupervised method for automatic construction of a disease dictionary from a large free text collection.

    Science.gov (United States)

    Xu, Rong; Supekar, Kaustubh; Morgan, Alex; Das, Amar; Garber, Alan

    2008-11-06

    Concept specific lexicons (e.g. diseases, drugs, anatomy) are a critical source of background knowledge for many medical language-processing systems. However, the rapid pace of biomedical research and the lack of constraints on usage ensure that such dictionaries are incomplete. Focusing on disease terminology, we have developed an automated, unsupervised, iterative pattern learning approach for constructing a comprehensive medical dictionary of disease terms from randomized clinical trial (RCT) abstracts, and we compared different ranking methods for automatically extracting con-textual patterns and concept terms. When used to identify disease concepts from 100 randomly chosen, manually annotated clinical abstracts, our disease dictionary shows significant performance improvement (F1 increased by 35-88%) over available, manually created disease terminologies.

  4. DIGITAL GEOECOLOGICAL MAPS AND SEVERAL METHODS OF ITS CONSTRUCTING IN A GIS ARCGIS

    Directory of Open Access Journals (Sweden)

    S. V. Lebedev

    2015-01-01

    Full Text Available This article is focused on methods of digital geoecological maps construction with using GIS ArcGIS technologies. The technique of GIS ArcGIS mapping is illustrated by examples of GIS maps of radioactive and chemical pollution in the snow cover on the territory of St. Petersburg’s (Russia. The geostatistic and deterministic approaches were applied for interpolation of input data. The input data were presented by the coordinates of points located on territory according to the scheme of measurements. The most optimal amount of classification intervals describing the natural processes and the phenomena of all-over distribution on the geoeclogical GIS maps is the 3–5 intervals of the parameter that will be considered. The borders of classes of intervals are set in depend on existing normative of pollution in different components of environment and empirical character of study parameter distribution on territory under consideration.

  5. A Study of the Processes, Methods and Techniques used in Negotiated or "Best Value" Procurements for Construction Services

    National Research Council Canada - National Science Library

    Schilling, Leonard

    2000-01-01

    ... are: Traditional Design-Bid-Build, Construction Management, Design-Build, and Design-Build-Operate-Transfer and the two most commonly used selection methods are Invitation to Bid and Request for Proposal (Source Selection...

  6. Proper survey methods for research of aquatic plant ecology and management

    Science.gov (United States)

    Proper survey methods are essential for objective, quantitative assessment of the distribution and abundance of aquatic plants as part of research and demonstration efforts. For research, the use of the appropriate method is an essential part of the scientific method, to ensure that the experimenta...

  7. Soil mixing design methods and construction techniques for use in high organic soils : [summary].

    Science.gov (United States)

    2015-10-01

    The soils which serve as foundations for construction projects may be roughly classified as : inorganic or organic. Inorganic soils vary in firmness and suitability for construction. Soft : or loose inorganic soils may be stabilized using cement or s...

  8. Methodical foundations of the preparation of highly valued personnel for high-rise construction

    Science.gov (United States)

    Belyaeva, Svetlana; Belyantseva, Oksana; Safonova, Nataliya; Vasilyeva, Olga

    2018-03-01

    When carrying out design and survey and construction and installation works for such an innovative type of activity as high-rise construction, the problem of personnel qualification becomes urgent. The article poses a research problem, identifies the main reasons for the need for training highly qualified specialists in construction, and suggests areas for improving training. The expediency of development of mentoring system was proved, the corresponding model of interaction between educational institutions and construction enterprises was offered, key interaction effects were evaluated.

  9. Application of mathematical model methods for optimization tasks in construction materials technology

    Science.gov (United States)

    Fomina, E. V.; Kozhukhova, N. I.; Sverguzova, S. V.; Fomin, A. E.

    2018-05-01

    In this paper, the regression equations method for design of construction material was studied. Regression and polynomial equations representing the correlation between the studied parameters were proposed. The logic design and software interface of the regression equations method focused on parameter optimization to provide the energy saving effect at the stage of autoclave aerated concrete design considering the replacement of traditionally used quartz sand by coal mining by-product such as argillite. The mathematical model represented by a quadric polynomial for the design of experiment was obtained using calculated and experimental data. This allowed the estimation of relationship between the composition and final properties of the aerated concrete. The surface response graphically presented in a nomogram allowed the estimation of concrete properties in response to variation of composition within the x-space. The optimal range of argillite content was obtained leading to a reduction of raw materials demand, development of target plastic strength of aerated concrete as well as a reduction of curing time before autoclave treatment. Generally, this method allows the design of autoclave aerated concrete with required performance without additional resource and time costs.

  10. Advanced methods on the evaluation of design earthquake motions for important power constructions

    International Nuclear Information System (INIS)

    Higashi, Sadanori; Shiba, Yoshiaki; Sato, Hiroaki; Sato, Yusuke; Nakajima, Masato; Sakai, Michiya; Sato, Kiyotaka

    2009-01-01

    In this report, we compiled advanced methods on the evaluation of design earthquake motions for important power constructions such as nuclear power, thermal power, and hydroelectric power facilities. For the nuclear and hydroelectric power facilities, we developed an inversion method of broad-band (0.1-5Hz) source process and obtained valid results from applying the method to the 2007 Niigata-ken Chuetsu-oki earthquake (M6.8). We have also improved our modeling techniques of thick sedimentary layered structure such as the S-wave velocity modeling by using microtremor array measurement and the frequency dependent damping factor with a lower limit. For seismic isolation design for nuclear power facilities, we proposed a design pseudo-velocity response spectrum. For the thermal power facilities, we performed three-dimensional numerical simulation of Kanto Basin for a prediction relation of long-period ground motion. We also proposed the introduction of probabilistic approach into the deterministic evaluation flow of design earthquake motions and evaluated the effect of a great earthquake with a short return period on the seismic hazard in Miyagi Prefecture, Japan. (author)

  11. Design and construction of a prototype for distillation of 131 I by the dry method

    International Nuclear Information System (INIS)

    Palacios Gonzalez, O.G.M.

    1993-01-01

    Due to need of a procedure standard for production of 131 I in the Mexican Republic, is very important stablish, based in two proof for the method in hot of distillation in dry development satisfactory (radiochemistry purity of distillation 99.7 %. The development of the methodology used is based in the necessity to experience with greater amount of raw material or activity in the white as soon more time of irradiation, and, using a semiautomatic for the personal agent of the production of prototype is independent of specific characteristics to method for dry distillation, as: raw materials used, temperatures of distillation and gas for carry to 131 I. The proof to prototype are functional mechanical type, however to perfect the dry method of distillation is necessary to finish the stage of factibility to prototype. The results of proofs were in form general satisfactory waiting only to refine details and to propose the construction of a better equipment of distillation used stainless steel with completed more exacts for to garantized an useful life great to equipment and to obtain a production of 131 I continuously in the next years. (Author). 21 refs, 26 figs, 8 tabs

  12. The Application of the Real Options Method for the Evaluation of High-Rise Construction Projects

    Science.gov (United States)

    Izotov, Aleksandr; Rostova, Olga; Dubgorn, Alissa

    2018-03-01

    The paper is devoted to the problem of evaluation of high-rise construction projects in a rapidly changing environment. The authors proposed an algorithm for constructing and embedding real options in high-rise construction projects, which makes it possible to increase the flexibility of managing multi-stage projects that have the ability to adapt to changing conditions of implementation.

  13. A Comparative Analysis on Assessment of Land Carrying Capacity with Ecological Footprint Analysis and Index System Method.

    Directory of Open Access Journals (Sweden)

    Yao Qian

    Full Text Available Land carrying capacity (LCC explains whether the local land resources are effectively used to support economic activities and/or human population. LCC can be evaluated commonly with two approaches, namely ecological footprint analysis (EFA and the index system method (ISM. EFA is helpful to investigate the effects of different land categories whereas ISM can be used to evaluate the contributions of social, environmental, and economic factors. Here we compared the two LCC-evaluation approaches with data collected from Xiamen City, a typical region where rapid economic growth and urbanization are found in China. The results show that LCC assessments with EFA and ISM not only complement each other but also are mutually supportive. Both assessments suggest that decreases in arable land and increasingly high energy consumption have major negative effects on LCC and threaten sustainable development for Xiamen City. It is important for the local policy makers, planners and designers to reduce ecological deficits by controlling fossil energy consumption, protecting arable land and forest land from converting into other land types, and slowing down the speed of urbanization, and to promote sustainability by controlling rural-to-urban immigration, increasing hazard-free treatment rate of household garbage, and raising energy consumption per unit industrial added value. Although EFA seems more appropriate for estimating LCC for a resource-output or self-sufficient region and ISM is more suitable for a resource-input region, both approaches should be employed when perform LCC assessment in any places around the world.

  14. A method for resilience assessment in dry Mediterranean socio-ecological systems

    Science.gov (United States)

    jucker riva, matteo; schwilch, gudrun; liniger, hanspeter

    2016-04-01

    Resilience is acknowledged as an important concept to understand and forecast the evolution of ecosystems. Even more so when these ecosystems are at risk of undergoing a regime shift that could radically modify its functioning and the provision of important ecosystem services. However, there is a lack of methodologies for practical assessment of resilience on the ground that could be useful to improve land management strategies. We present here a methodology based on the WOCAT approach to land management evaluation, that allows assessing in a semi quantitative way the resilience of a land use system, and in particular the role of land management in preventing, mitigating or fostering recovery following a disturbance. The first step of the evaluation centers on assessing the values of land users with regards to the provision of ESS and the perception of degradation; this allows defining the healthy state of the system in a participative way. Furthermore, scientific and experience knowledge are combined to assess the possible evolution of the system and of the internal and external pressure sources that can degrade it, and the impact of shocks and disturbances on the system. The contribution of land management practices to the resilience of the system is analyzed in detail, together with the resilience of land management itself across time, space and different disturbances. Results from the first application of the Resilience Assessment Tool in the study sites of the CASCADE project will be shown, along with some general conclusions about the most relevant factors playing a role in the resilience of dry Mediterranean socio-ecological systems.

  15. The method of using current regulations and standards in designing management and technologies of construction

    Directory of Open Access Journals (Sweden)

    Sinenko Sergey

    2017-01-01

    Full Text Available Economic efficiency of using funds in construction of buildings and structures begins from an effective, proper design, which is based on modern, cutting-edge, advanced equipment, streamlined organization and process solutions of construction operations. In the light of this it is considered application of “Self-Organization and Technology of Building” multifunctional software package capable of solving various engineering tasks on designing management of construction operations in accordance with the applicable rules and regulations in view of using software for automatic generation of workflow. Implementing this software in the construction management processes may help to solve management tasks at the construction site.

  16. The influence of common method bias on the relationship of the socio-ecological model in predicting physical activity behavior

    Science.gov (United States)

    Wingate, Savanna; Sng, Eveleen; Loprinzi, Paul D.

    2018-01-01

    Background: The purpose of this study was to evaluate the extent, if any, that the association between socio-ecological parameters and physical activity may be influenced by common method bias (CMB). Methods: This study took place between February and May of 2017 at a Southeastern University in the United States. A randomized controlled experiment was employed among 119 young adults.Participants were randomized into either group 1 (the group we attempted to minimize CMB)or group 2 (control group). In group 1, CMB was minimized via various procedural remedies,such as separating the measurement of predictor and criterion variables by introducing a time lag (temporal; 2 visits several days apart), creating a cover story (psychological), and approximating measures to have data collected in different media (computer-based vs. paper and pencil) and different locations to control method variance when collecting self-report measures from the same source. Socio-ecological parameters (self-efficacy; friend support; family support)and physical activity were self-reported. Results: Exercise self-efficacy was significantly associated with physical activity. This association (β = 0.74, 95% CI: 0.33-1.1; P = 0.001) was only observed in group 2 (control), but not in group 1 (experimental group) (β = 0.03; 95% CI: -0.57-0.63; P = 0.91). The difference in these coefficients (i.e., β = 0.74 vs. β = 0.03) was statistically significant (P = 0.04). Conclusion: Future research in this field, when feasible, may wish to consider employing procedural and statistical remedies to minimize CMB. PMID:29423361

  17. Study on the methods of rational analysis about the area of the Planning of Sea Usage of Regional Construction

    Science.gov (United States)

    Ya-Juan, Li; Tian-Yu, Mao; Mingjing-Tian

    2018-03-01

    The Planning of Sea Usage of Regional Construction is a new area, and the rational analysis about the area of which is one of its difficulties. Based on “Urban land classification and land use planning and construction standards”, the land use control index method study the rationality of the sea usage area of the whole region, by accumulating for specific land use indicators for each land type within the planning area. This paper, takeing the project named “caofeidian integrated service area” for example, make a little study on the land use control index method used by the sea usage demonstration of the planning of sea usage of regional construction. The study will be good for improving the technical methods of rational analysis about the area of the planning of sea usage of regional construction.

  18. Ecological niche of plant pathogens

    Directory of Open Access Journals (Sweden)

    Ecaterina Fodor

    2011-06-01

    Full Text Available Disease ecology is a new approach to the understanding of the spread and dynamics of pathogens in natural and man-made environments. Defining and describing the ecological niche of the pathogens is one of the major tasks for ecological theory, as well as for practitioners preoccupied with the control and forecasting of established and emerging diseases. Niche theory has been periodically revised, not including in an explicit way the pathogens. However, many progresses have been achieved in niche modeling of disease spread, but few attempts were made to construct a theoretical frame for the ecological niche of pathogens. The paper is a review of the knowledge accumulated during last decades in the niche theory of pathogens and proposes an ecological approach in research. It quest for new control methods in what concerns forest plant pathogens, with a special emphasis on fungi like organisms of the genus Phytophthora. Species of Phytophthora are the most successful plant pathogens of the moment, affecting forest and agricultural systems worldwide, many of them being invasive alien organisms in many ecosystems. The hyperspace of their ecological niche is defined by hosts, environment and human interference, as main axes. To select most important variables within the hyperspace, is important the understanding of the complex role of pathogens in the ecosystems as well as for control programs. Biotic relationships within ecosystem of host-pathogen couple are depicted by ecological network and specific metrics attached to this. The star shaped network is characterized by few high degree nodes, by short path lengths and relatively low connectivity, premises for a rapid disturbance spread. 

  19. Ecological niche of plant pathogens

    Directory of Open Access Journals (Sweden)

    Ecaterina Fodor

    2011-02-01

    Full Text Available Disease ecology is a new approach to the understanding of the spread and dynamics of pathogens in natural and man-made environments. Defining and describing the ecological niche of the pathogens is one of the major tasks for ecological theory, as well as for practitioners preoccupied with the control and forecasting of established and emerging diseases. Niche theory has been periodically revised, not including in an explicit way the pathogens. However, many progresses have been achieved in niche modeling of disease spread, but few attempts were made to construct a theoretical frame for the ecological niche of pathogens. The paper is a review of the knowledge accumulated during last decades in the niche theory of pathogens and proposes an ecological approach in research. It quest for new control methods in what concerns forest plant pathogens, with a special emphasis on fungi like organisms of the genus Phytophthora. Species of Phytophthora are the most successful plant pathogens of the moment, affecting forest and agricultural systems worldwide, many of them being invasive alien organisms in many ecosystems. The hyperspace of their ecological niche is defined by hosts, environment and human interference, as main axes. To select most important variables within the hyperspace, is important for the understanding of the complex role of pathogens in the ecosystems as well as for control programs. Biotic relationships within ecosystem of host-pathogen couple are depicted by ecological network and specific metrics attached to this. The star shaped network is characterized by few high degree nodes, by short path lengths and relatively low connectivity, premises for a rapid disturbance spread.

  20. A Study on Remote Probing Method for Drawing Ecology/Nature Map and the Application (III) - Drawing the Swamp Classification Map around River

    Energy Technology Data Exchange (ETDEWEB)

    Jeon, Seong Woo; Cho, Jeong Keon; Jeong, Hwi Chol [Korea Environment Institute, Seoul (Korea)

    2000-12-01

    The map of ecology/nature in the amended Natural Environment Conservation Act is the necessary data, which is drawn through assessing the national land with ecological factors, to execute the Korea's environmental policy. Such important ecology/nature map should be continuously revised and improved the reliability with adding several new factors. In this point of view, this study has the significance in presenting the improvement scheme of ecology/nature map. 'A Study on Remote Probing Method for Drawing Ecology/Nature Map and the Application' that has been performed for 3 years since 1998 has researched the drawing method of subject maps that could be built in a short time - a land-covering classification map, a vegetation classification map, and a swamp classification map around river - and the promoting principles hereafter. This study also presented the possibility and limit of classification by several satellite image data, so it would be a big help to build the subject map in the Government level. The land-covering classification map, a result of the first year, has been already being built by Ministry of Environment as a national project, and the improvement scheme of the vegetation map that was presented as a result of second year has been used in building the basic ecology/nature map. We hope that the results from this study will be applied as basic data to draw an ecology/nature map and contribute to expanding the understanding on the usefulness of the several ecosystem analysis methods with applying an ecology/nature map and a remote probe. 55 refs., 38 figs., 24 tabs.

  1. Construction of dynamic model of CANDU-SCWR using moving boundary method

    International Nuclear Information System (INIS)

    Sun Peiwei; Jiang Jin; Shan Jianqiang

    2011-01-01

    Highlights: → A dynamic model of a CANDU-SCWR is developed. → The advantages of the moving boundary method are demonstrated. → The dynamic behaviours of the CANDU-SCWR are obtained by simulation. → The model can predict the dynamic behaviours of the CANDU-SCWR. → Linear dynamic models for CANDU-SCWR are derived by system identification techniques. - Abstract: CANDU-SCWR (Supercritical Water-Cooled Reactor) is one type of Generation IV reactors being developed in Canada. Its dynamic characteristics are different from existing CANDU reactors due to the supercritical conditions of the coolant. To study the behaviours of such reactors under disturbances and to design adequate control systems, it is essential to have an accurate dynamic model to describe such a reactor. One dynamic model is developed for CANDU-SCWR in this paper. In the model construction process, three regions have been considered: Liquid Region I, Liquid Region II and Vapour Region, depending on bulk and wall temperatures being higher or lower the pseudo-critical temperature. A moving boundary method is used to describe the movement of boundaries across these regions. Some benefits of adopting moving boundary method are illustrated by comparing with the fixed boundary method. The results of the steady-state simulation based on the developed model agree well with the design parameters. The transient simulations demonstrate that the model can predict the dynamic behaviours of CANDU-SCWR. Furthermore, to investigate the responses of the reactor to small amplitude perturbations and to facilitate control system designs, a least-square based system identification technique is used to obtain a set of linear dynamic models around the design point. The responses based on the linear dynamic models are validated with simulation results from nonlinear CANDU-SCWR dynamic model.

  2. Comparing models of rapidly rotating relativistic stars constructed by two numerical methods

    Science.gov (United States)

    Stergioulas, Nikolaos; Friedman, John L.

    1995-05-01

    We present the first direct comparison of codes based on two different numerical methods for constructing rapidly rotating relativistic stars. A code based on the Komatsu-Eriguchi-Hachisu (KEH) method (Komatsu et al. 1989), written by Stergioulas, is compared to the Butterworth-Ipser code (BI), as modified by Friedman, Ipser, & Parker. We compare models obtained by each method and evaluate the accuracy and efficiency of the two codes. The agreement is surprisingly good, and error bars in the published numbers for maximum frequencies based on BI are dominated not by the code inaccuracy but by the number of models used to approximate a continuous sequence of stars. The BI code is faster per iteration, and it converges more rapidly at low density, while KEH converges more rapidly at high density; KEH also converges in regions where BI does not, allowing one to compute some models unstable against collapse that are inaccessible to the BI code. A relatively large discrepancy recently reported (Eriguchi et al. 1994) for models based on Friedman-Pandharipande equation of state is found to arise from the use of two different versions of the equation of state. For two representative equations of state, the two-dimensional space of equilibrium configurations is displayed as a surface in a three-dimensional space of angular momentum, mass, and central density. We find, for a given equation of state, that equilibrium models with maximum values of mass, baryon mass, and angular momentum are (generically) either all unstable to collapse or are all stable. In the first case, the stable model with maximum angular velocity is also the model with maximum mass, baryon mass, and angular momentum. In the second case, the stable models with maximum values of these quantities are all distinct. Our implementation of the KEH method will be available as a public domain program for interested users.

  3. A method of constructing geo-object ontology in disaster system for prevention and decrease

    Science.gov (United States)

    Li, Bin; Liu, Jiping; Shi, Lihong; Wang, Zhenfeng

    2009-10-01

    A kind of formal system, which can express clearly a certain entity or information, is needed to express geographical concept. Besides, some rules explaining the interrelationship and action between different components are also required. Therefore, the conception of geo-object ontology is introduced. It is a shared formalization and display specification of conceptual knowledge system in the field of concrete application of spatial information science. It can constitute hierarchy structure, which derives from the concept classification system in the geographical area. Its concepts can be described by the property. Property sets can form a vector space with multi-dimensional characteristics. Geographic space is composed of different types of geographic entities. And its concept is formed by a series of geographic entities with the same properties and actions. Moreover, each of the geographic entities can be mapped to an object, and each object has its spatial property, time information and topology, semantic relationships associated with other objects. The biggest difference between ecumenical information ontology and geo-ontology is that the latter has the spatial characteristics. During the construction process of geo-object ontology, some important components, such as geographic type, spatial relation, spatial entity type and coordinates, time, should be included to make further research. Here, taking disaster as an example, by using Protégé and OWL, combined methods used by constructing the geo-object ontology in the form of being manual made by domanial experts and semi-automatic are investigated oriented to disaster to serve ultimately geographic information retrieval service driven by ontology.

  4. Design and Construction of Equipment for Applying the Geophysical Prospecting Method Electric Tomography

    Directory of Open Access Journals (Sweden)

    Fabio Héctor Giraldo Sánchez

    2013-06-01

    Full Text Available Outlines the procedure for the design and construction of electric equipment for geophysical prospecting through electrical tomography method. The team is of average power, ensuring exploration depths quite suitable for applications and commercial and geotechnical studies. The device is essentially a DC voltage source of 500 volts that is able to provide a maximum current of 1 amp. It also contains a small charge current source of electrical currents counteract naturally found in the subsoil and are manifested as a difference in the surface potential. A general explanation of the geophysical method in question, helps to understand the basic principles of operation of the equipment and functions to be fulfilled. After building the team, we conducted a field data acquisition, in area near the town of Gachancipa Cundinamarca. The data from this equipment are processed with specialized software. The images obtained with the software presents the distributions of subsurface resistivity can be associated with the possible structures and geology of the study area.

  5. Method of constructing a fundamental equation of state based on a scaling hypothesis

    Science.gov (United States)

    Rykov, V. A.; Rykov, S. V.; Kudryavtseva, I. V.; Sverdlov, A. V.

    2017-11-01

    The work studies the issues associated with the construction of the equation of state (EOS) taking due account of substance behavior in the critical region and associated with the scaling theory of critical phenomena (ST). The authors have developed a new version of the scaling hypothesis; this approach uses the following: a) substance equation of state having a form of a Schofield-Litster-Ho linear model (LM) and b) the Benedek hypothesis. The Benedek hypothesis has found a similar behavior character for a number of properties (isochoric and isobaric heat capacities, isothermal compressibility coefficient) at critical and near-critical isochors in the vicinity of the critical point. A method is proposed to build the fundamental equation of state (FEOS) which satisfies the ST power laws. The FEOS building method is verified by building the equation of state for argon within the state parameters range: up to 1000 MPa in terms of pressure, and from 83.056 К to 13000 К in terms of temperature. The executed comparison with the fundamental equations of state of Stewart-Jacobsen (1989), of Kozlov at al (1996), of Tegeler-Span-Wagner (1999), of has shown that the FEOS describes the known experimental data with an essentially lower error.

  6. Method of construction of transient from a cycle of neuronal recurrence equation

    International Nuclear Information System (INIS)

    Ndoundam, R.; Tchuente, M.

    2005-11-01

    We study the sequences generated by neuronal recurrence equations of the form x(n) = 1[Σ j k =1 a j x(n - j) - θ], where k is the size of memory (k represents the number of previous states x(n - 1), x(n - 2), ...,x(n - k) which intervene in the calculation of x(n)). We are interested in the number of steps (transient length) from an initial configuration to the cycle. We propose a method of construction of transient from a cycle generated by neuronal recurrence equation. We apply this method to build a neuronal recurrence equation with inhibitory memory of size (s+1)6m, whose dynamics contains an evolution of transient length (s + 1) x (5m + 2 + lcm(p 0 , p 1 , ..., p 1 , 3m - 1)) and a cycle of length (s + 1) x lcm(p 0 , p 1 , ..., p s-1 , 2m + 1) where lcm denotes the least common multiple, and p 0 , p 1 , ..., p s-1 are prime numbers lying between 2m and 3m. (author)

  7. LifePrint: a novel k-tuple distance method for construction of phylogenetic trees

    Directory of Open Access Journals (Sweden)

    Fabián Reyes-Prieto

    2011-01-01

    Full Text Available Fabián Reyes-Prieto1, Adda J García-Chéquer1, Hueman Jaimes-Díaz1, Janet Casique-Almazán1, Juana M Espinosa-Lara1, Rosaura Palma-Orozco2, Alfonso Méndez-Tenorio1, Rogelio Maldonado-Rodríguez1, Kenneth L Beattie31Laboratory of Biotechnology and Genomic Bioinformatics, Department of Biochemistry, National School of Biological Sciences, 2Superior School of Computer Sciences, National Polytechnic Institute, Mexico City, Mexico; 3Amerigenics Inc, Crossville, Tennessee, USAPurpose: Here we describe LifePrint, a sequence alignment-independent k-tuple distance method to estimate relatedness between complete genomes.Methods: We designed a representative sample of all possible DNA tuples of length 9 (9-tuples. The final sample comprises 1878 tuples (called the LifePrint set of 9-tuples; LPS9 that are distinct from each other by at least two internal and noncontiguous nucleotide differences. For validation of our k-tuple distance method, we analyzed several real and simulated viroid genomes. Using different distance metrics, we scrutinized diverse viroid genomes to estimate the k-tuple distances between these genomic sequences. Then we used the estimated genomic k-tuple distances to construct phylogenetic trees using the neighbor-joining algorithm. A comparison of the accuracy of LPS9 and the previously reported 5-tuple method was made using symmetric differences between the trees estimated from each method and a simulated “true” phylogenetic tree.Results: The identified optimal search scheme for LPS9 allows only up to two nucleotide differences between each 9-tuple and the scrutinized genome. Similarity search results of simulated viroid genomes indicate that, in most cases, LPS9 is able to detect single-base substitutions between genomes efficiently. Analysis of simulated genomic variants with a high proportion of base substitutions indicates that LPS9 is able to discern relationships between genomic variants with up to 40% of nucleotide

  8. Study of the two-dimensional Hubbard model at half-filling through constructive methods; Etude du modele de Hubbard bidimensionnel a demi remplissage par des methodes constructives

    Energy Technology Data Exchange (ETDEWEB)

    Afchain, St

    2005-02-15

    The Hubbard model is the simplest model to describe the behaviour of fermions on a network, it takes into account only fermion scattering and only interactions with other fermions located on the same site. Half-filling means that the total number of fermions is equal to half the number of sites. In the first chapter we show how we can pass trough successive approximations from a very general Hamiltonian to the Hubbard Hamiltonian. The second chapter is dedicated to the passage from the Hamiltonian formalism to the Grassmanian functional formalism. The main idea is to show that the correlation functions of the Hamiltonian approach can be described through fermionic functional integrals which implies the possibility of speaking of the model in terms of field theory. The chapter 3 deals with the main constructive techniques that allow the strict and consistent construction of models inside the frame of field theory. We show by proving the violation of a condition concerning self-energy, that the two-dimensional Hubbard model at half-filling has not the behaviour of a Fermi liquid in the Landau's interpretation. (A.C.)

  9. Knowledge acquisition in ecological poduct design: the effects of computer-mediated communication and elicitation method

    OpenAIRE

    Sauer, J.; Schramme, S.; Rüttinger, B.

    2000-01-01

    This article presents a study that examines multiple effects of using different means of computer-mediated communication and knowledge elicitation methods during a product design process. The experimental task involved a typical scenario in product design, in which a knowledge engineer consults two experts to generate knowledge about a design issue. Employing a 3x2 between-subjects design, three conference types (face-to-face, computer, multivedia) and two knowledge elicitation methods (struc...

  10. The use of physical methods for elemental analysis of ecological samples

    International Nuclear Information System (INIS)

    Kudryashov, V.I.; Zhuravleva, E.L.; Maslov, O.D.

    1996-01-01

    The possibility of the application of difference X-ray and instrumental activation methods elemental analysis of rock ice, snow, water, soil and other natural samples was investigated. The content of some elements in ice samples from the glaciers of the Pamirs-Alaj mountain system for period 1973-1984 years has been determined. The recommendations for the choice of analysis methods with the aim of the environmental control have been given. (author). 10 refs., 6 figs., 1 tab

  11. Understanding the relationship between safety culture dimensions and safety performance of construction projects through partial least square method

    Science.gov (United States)

    Latief, Yusuf; Machfudiyanto, Rossy A.; Arifuddin, Rosmariani; Yogiswara, Yoko

    2017-03-01

    Based on the data, 32% of accidental cases in Indonesia occurs on constructional sectors. It is supported by the data from Public Work and Housing Department that 27.43% of the implementation level of Safety Management System policy at construction companies in Indonesia remains unsafe categories. Moreover, there are dimensions of occupational safety culture formed including leadership, behavior, strategy, policy, process, people, safety cost, value and contract system. The aim of this study is to determine the model of an effective safety culture and know the relationship between dimensions in construction industry. The method used in this research was questionnaire survey which was distributed to the sample of construction companies either in a national private one in Indonesia. The result of this research is supposed to be able to illustrate the development of the relationship among occupational safety culture dimensions which have influences to the performances of constructional companies in Indonesia.

  12. A comparison of spatial analysis methods for the construction of topographic maps of retinal cell density.

    Directory of Open Access Journals (Sweden)

    Eduardo Garza-Gisholt

    Full Text Available Topographic maps that illustrate variations in the density of different neuronal sub-types across the retina are valuable tools for understanding the adaptive significance of retinal specialisations in different species of vertebrates. To date, such maps have been created from raw count data that have been subjected to only limited analysis (linear interpolation and, in many cases, have been presented as iso-density contour maps with contour lines that have been smoothed 'by eye'. With the use of stereological approach to count neuronal distribution, a more rigorous approach to analysing the count data is warranted and potentially provides a more accurate representation of the neuron distribution pattern. Moreover, a formal spatial analysis of retinal topography permits a more robust comparison of topographic maps within and between species. In this paper, we present a new R-script for analysing the topography of retinal neurons and compare methods of interpolating and smoothing count data for the construction of topographic maps. We compare four methods for spatial analysis of cell count data: Akima interpolation, thin plate spline interpolation, thin plate spline smoothing and Gaussian kernel smoothing. The use of interpolation 'respects' the observed data and simply calculates the intermediate values required to create iso-density contour maps. Interpolation preserves more of the data but, consequently includes outliers, sampling errors and/or other experimental artefacts. In contrast, smoothing the data reduces the 'noise' caused by artefacts and permits a clearer representation of the dominant, 'real' distribution. This is particularly useful where cell density gradients are shallow and small variations in local density may dramatically influence the perceived spatial pattern of neuronal topography. The thin plate spline and the Gaussian kernel methods both produce similar retinal topography maps but the smoothing parameters used may affect

  13. A comparison of spatial analysis methods for the construction of topographic maps of retinal cell density.

    Science.gov (United States)

    Garza-Gisholt, Eduardo; Hemmi, Jan M; Hart, Nathan S; Collin, Shaun P

    2014-01-01

    Topographic maps that illustrate variations in the density of different neuronal sub-types across the retina are valuable tools for understanding the adaptive significance of retinal specialisations in different species of vertebrates. To date, such maps have been created from raw count data that have been subjected to only limited analysis (linear interpolation) and, in many cases, have been presented as iso-density contour maps with contour lines that have been smoothed 'by eye'. With the use of stereological approach to count neuronal distribution, a more rigorous approach to analysing the count data is warranted and potentially provides a more accurate representation of the neuron distribution pattern. Moreover, a formal spatial analysis of retinal topography permits a more robust comparison of topographic maps within and between species. In this paper, we present a new R-script for analysing the topography of retinal neurons and compare methods of interpolating and smoothing count data for the construction of topographic maps. We compare four methods for spatial analysis of cell count data: Akima interpolation, thin plate spline interpolation, thin plate spline smoothing and Gaussian kernel smoothing. The use of interpolation 'respects' the observed data and simply calculates the intermediate values required to create iso-density contour maps. Interpolation preserves more of the data but, consequently includes outliers, sampling errors and/or other experimental artefacts. In contrast, smoothing the data reduces the 'noise' caused by artefacts and permits a clearer representation of the dominant, 'real' distribution. This is particularly useful where cell density gradients are shallow and small variations in local density may dramatically influence the perceived spatial pattern of neuronal topography. The thin plate spline and the Gaussian kernel methods both produce similar retinal topography maps but the smoothing parameters used may affect the outcome.

  14. [Assessment on the ecological suitability in Zhuhai City, Guangdong, China, based on minimum cumulative resistance model].

    Science.gov (United States)

    Li, Jian-fei; Li, Lin; Guo, Luo; Du, Shi-hong

    2016-01-01

    Urban landscape has the characteristics of spatial heterogeneity. Because the expansion process of urban constructive or ecological land has different resistance values, the land unit stimulates and promotes the expansion of ecological land with different intensity. To compare the effect of promoting and hindering functions in the same land unit, we firstly compared the minimum cumulative resistance value of promoting and hindering functions, and then looked for the balance of two landscape processes under the same standard. According to the ecology principle of minimum limit factor, taking the minimum cumulative resistance analysis method under two expansion processes as the evaluation method of urban land ecological suitability, this research took Zhuhai City as the study area to estimate urban ecological suitability by relative evaluation method with remote sensing image, field survey, and statistics data. With the support of ArcGIS, five types of indicators on landscape types, ecological value, soil erosion sensitivity, sensitivity of geological disasters, and ecological function were selected as input parameters in the minimum cumulative resistance model to compute urban ecological suitability. The results showed that the ecological suitability of the whole Zhuhai City was divided into five levels: constructive expansion prohibited zone (10.1%), constructive expansion restricted zone (32.9%), key construction zone (36.3%), priority development zone (2.3%), and basic cropland (18.4%). Ecological suitability of the central area of Zhuhai City was divided into four levels: constructive expansion prohibited zone (11.6%), constructive expansion restricted zone (25.6%), key construction zone (52.4%), priority development zone (10.4%). Finally, we put forward the sustainable development framework of Zhuhai City according to the research conclusion. On one hand, the government should strictly control the development of the urban center area. On the other hand, the

  15. Perspectives of construction robots

    Science.gov (United States)

    Stepanov, M. A.; Gridchin, A. M.

    2018-03-01

    This article is an overview of construction robots features, based on formulating the list of requirements for different types of construction robots in relation to different types of construction works.. It describes a variety of construction works and ways to construct new or to adapt existing robot designs for a construction process. Also, it shows the prospects of AI-controlled machines, implementation of automated control systems and networks on construction sites. In the end, different ways to develop and improve, including ecological aspect, the construction process through the wide robotization, creating of data communication networks and, in perspective, establishing of fully AI-controlled construction complex are formulated.

  16. Methods for Detecting Early Warnings of Critical Transitions in Time Series Illustrated Using Simulated Ecological Data

    Science.gov (United States)

    Dakos, Vasilis; Carpenter, Stephen R.; Brock, William A.; Ellison, Aaron M.; Guttal, Vishwesha; Ives, Anthony R.; Kéfi, Sonia; Livina, Valerie; Seekell, David A.; van Nes, Egbert H.; Scheffer, Marten

    2012-01-01

    Many dynamical systems, including lakes, organisms, ocean circulation patterns, or financial markets, are now thought to have tipping points where critical transitions to a contrasting state can happen. Because critical transitions can occur unexpectedly and are difficult to manage, there is a need for methods that can be used to identify when a critical transition is approaching. Recent theory shows that we can identify the proximity of a system to a critical transition using a variety of so-called ‘early warning signals’, and successful empirical examples suggest a potential for practical applicability. However, while the range of proposed methods for predicting critical transitions is rapidly expanding, opinions on their practical use differ widely, and there is no comparative study that tests the limitations of the different methods to identify approaching critical transitions using time-series data. Here, we summarize a range of currently available early warning methods and apply them to two simulated time series that are typical of systems undergoing a critical transition. In addition to a methodological guide, our work offers a practical toolbox that may be used in a wide range of fields to help detect early warning signals of critical transitions in time series data. PMID:22815897

  17. Wind energy development: Methods to assess bird and bat fatality rates post-construction

    Science.gov (United States)

    Huso, Manuela; Dalthorp, Daniel; Miller, T J; Bruns, Dawn

    2016-01-01

    Monitoring fatalities at wind energy facilities after they have been constructed can provide valuable information regarding impacts of wind power development on wildlife. The objective of this monitoring is to estimate abundance of a super-population of carcasses that entered the area within a designated period of time. By definition, the population is not closed and carcasses can enter as they are killed through collision with turbines, and leave as they are removed by scavengers or decompose to a point where they are not recognizable. In addition, the population is not inherently mobile, but can only change location through some external force. A focus on number of animal carcasses comprising the super-population, combined with peculiar traits that resist classic assumptions, distinguish fatality estimation at wind-power facilities from more classic abundance estimates that can be addressed through mark-recapture techniques or other well-known abundance estimators. We review the available methods to estimate the super-population of carcasses at wind power facilities. We discuss the role of these estimates in determining appropriate levels of minimization and mitigation of impacts to individual species of concern. We discuss the potential to extrapolate these measurements to reflect the cumulative effect of the industry on individual species. Finally, we suggest avenues of research needed to strengthen our understanding of the effect wind power development has, and might have in the future, on wildlife on this continent and worldwide.

  18. Design and construction of hydrogen pellet injector by droplet-method

    International Nuclear Information System (INIS)

    Noda, Etsuo; Iida, Yoshiyuki; Sekiguchi, Tadashi; Suemori, Nobuo; Imaizumi, Hideki.

    1984-01-01

    A hydrogen pellet injector by a droplet-method has been constructed and studied, in order to realize a hydrogen-isotope pellet injector for refueling into nuclear fusion reactors, which can inject pellets into plasma repetitively. Preliminary experiments with oxygen gas, instead of hydrogen gas, has been systematically carried out. Assuming the liquid concerned as viscous fluid, theoretical predictions about droplet-diameter, its ejected velocity and optimum frequency of ejecting-nozzle vibration for stable droplet production has been made, and it is found that theoretical results are in good agreement with experimental ones. It is found that the stable droplet train can be obtained when the value of Reynolds number is in the range of 1,100--1,300. In the hydrogen experiments based upon the oxygen results, the production of a stable hydrogen liquid-droplet train, their self-solidification and transfer into a vacuum space through an orifice (with the diameter of 1 mm) have been successfully realized, by maintaining the gas pressure around the droplets at 45--50 Torr. (author)

  19. Ecological content validation of the Information Assessment Method for parents (IAM-parent): A mixed methods study.

    Science.gov (United States)

    Bujold, M; El Sherif, R; Bush, P L; Johnson-Lafleur, J; Doray, G; Pluye, P

    2018-02-01

    This mixed methods study content validated the Information Assessment Method for parents (IAM-parent) that allows users to systematically rate and comment on online parenting information. Quantitative data and results: 22,407 IAM ratings were collected; of the initial 32 items, descriptive statistics showed that 10 had low relevance. Qualitative data and results: IAM-based comments were collected, and 20 IAM users were interviewed (maximum variation sample); the qualitative data analysis assessed the representativeness of IAM items, and identified items with problematic wording. Researchers, the program director, and Web editors integrated quantitative and qualitative results, which led to a shorter and clearer IAM-parent. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

  20. Is Acculturation a Dynamic Construct?: The Influence of Method of Priming Culture on Acculturation

    Science.gov (United States)

    Lechuga, Julia

    2008-01-01

    Recent evidence suggests that culture is a dynamic construct activated in response to cues encountered in a given situation. Research on acculturation indicates that this is a complex construct that might be domain specific. Two studies were undertaken to investigate the effect of two ways of priming culture on acculturation and enculturation…