WorldWideScience

Sample records for eco reactor

  1. ECO LOGIC INTERNATIONAL GAS-PHASE CHEMICAL REDUCTION PROCESS - THE REACTOR SYSTEM - APPLICATIONS ANALYSIS REPORT

    Science.gov (United States)

    The ELI Eco Logic International Inc. (Eco Logic) process thermally separates organics, then chemically reduces them in a hydrogen atmosphere, converting them to a reformed gas that consists of light hydrocarbons and water. A scrubber treats the reformed gas to remove hydrogen chl...

  2. Comparative study on nutrient removal of agricultural non-point source pollution for three filter media filling schemes in eco-soil reactors.

    Science.gov (United States)

    Du, Fuyi; Xie, Qingjie; Fang, Longxiang; Su, Hang

    2016-08-01

    Nutrients (nitrogen and phosphorus) from agricultural non-point source (NPS) pollution have been increasingly recognized as a major contributor to the deterioration of water quality in recent years. The purpose of this article is to investigate the discrepancies in interception of nutrients in agricultural NPS pollution for eco-soil reactors using different filling schemes. Parallel eco-soil reactors of laboratory scale were created and filled with filter media, such as grit, zeolite, limestone, and gravel. Three filling schemes were adopted: increasing-sized filling (I-filling), decreasing-sized filling (D-filling), and blend-sized filling (B-filling). The systems were intermittent operations via simulated rainstorm runoff. The nutrient removal efficiency, biomass accumulation and vertical dissolved oxygen (DO) distribution were defined to assess the performance of eco-soil. The results showed that B-filling reactor presented an ideal DO for partial nitrification-denitrification across the eco-soil, and B-filling was the most stable in the change of bio-film accumulation trends with depth in the three fillings. Simultaneous and highest removals of NH4(+)-N (57.74-70.52%), total nitrogen (43.69-54.50%), and total phosphorus (42.50-55.00%) were obtained in the B-filling, demonstrating the efficiency of the blend filling schemes of eco-soil for oxygen transfer and biomass accumulation to cope with agricultural NPS pollution.

  3. Nitrogen and phosphorus treatment of marine wastewater by a laboratory-scale sequencing batch reactor with eco-friendly marine high-efficiency sediment.

    Science.gov (United States)

    Cho, Seonghyeon; Kim, Jinsoo; Kim, Sungchul; Lee, Sang-Seob

    2017-06-22

    We screened and identified a NH 3 -N-removing bacterial strain, Bacillus sp. KGN1, and a [Formula: see text] removing strain, Vibrio sp. KGP1, from 960 indigenous marine isolates from seawater and marine sediment from Tongyeong, South Korea. We developed eco-friendly high-efficiency marine sludge (eco-HEMS), and inoculated these marine bacterial strains into the marine sediment. A laboratory-scale sequencing batch reactor (SBR) system using the eco-HEMS for marine wastewater from land-based fish farms improved the treatment performance as indicated by 88.2% removal efficiency (RE) of total nitrogen (initial: 5.6 mg/L) and 90.6% RE of total phosphorus (initial: 1.2 mg/L) under the optimal operation conditions (food and microorganism (F/M) ratio, 0.35 g SCOD Cr /g mixed liquor volatile suspended solids (MLVSS)·d; dissolved oxygen (DO) 1.0 ± 0.2 mg/L; hydraulic retention time (HRT), 6.6 h; solids retention time (SRT), 12 d). The following kinetic parameters were obtained: cell yield (Y), 0.29 g MLVSS/g SCOD Cr ; specific growth rate (µ), 0.06 d -1 ; specific nitrification rate (SNR), 0.49 mg NH 3 -N/g MLVSS·h; specific denitrification rate (SDNR), 0.005 mg [Formula: see text]/g MLVSS·h; specific phosphorus uptake rate (SPUR), 0.12 mg [Formula: see text]/g MLVSS·h. The nitrogen- and phosphorus-removing bacterial strains comprised 18.4% of distribution rate in the microbial community of eco-HEMS under the optimal operation conditions. Therefore, eco-HEMS effectively removed nitrogen and phosphorus from highly saline marine wastewater from land-based fish farms with improving SNR, SDNR, and SPUR values in more diverse microbial communities. DO: dissolved oxygen; Eco-HEMS: eco-friendly high efficiency marine sludge; F/M: food and microorganism ratio; HRT: hydraulic retention time; ML(V)SS: mixed liquor (volatile) suspended solids; NCBI: National Center for Biotechnology Information; ND: not determined; qPCR: quantitative real-time polymerase

  4. DEMONSTRATION BULLETIN: THE ECO LOGIC THERMAL DESORPTION UNIT - MIDDLEGROUND LANDFILL - BAY CITY, MI - ELI ECO LOGIC INTERNATIONAL, INC.

    Science.gov (United States)

    ECO Logic has developed a thermal desorption unit 0"DU) for the treatment of soils contaminated with hazardous organic contaminants. This TDU has been designed to be used in conjunction with Eco Logic's patented gas-phase chemical reduction reactor. The Eco Logic reactor is the s...

  5. EcoBears

    DEFF Research Database (Denmark)

    Nielsen, Nick; Pedersen, Sandra Bleuenn; Sørensen, Jens Ager

    2015-01-01

    In this paper, we introduce the EcoBears concept that aims to augment household appliances with functional and aesthetic features to promote their "use'' and "longevity of use'' to prevent their disposal. The EcoBears also aim to support the communication of environmental issues in the home setting....... We present our initial design and implementation of the EcoBears that consist of two bear modules (a mother and her cub). We also present our preliminary concept validations and lessons learned to be considered for future directions....

  6. Reactor

    International Nuclear Information System (INIS)

    Toyama, Masahiro; Kasai, Shigeo.

    1978-01-01

    Purpose: To provide a lmfbr type reactor wherein effusion of coolants through a loop contact portion is reduced even when fuel assemblies float up, and misloading of reactor core constituting elements is prevented thereby improving the reactor safety. Constitution: The reactor core constituents are secured in the reactor by utilizing the differential pressure between the high-pressure cooling chamber and low-pressure cooling chamber. A resistance port is formed at the upper part of a connecting pipe, and which is connect the low-pressure cooling chamber and the lower surface of the reactor core constituent. This resistance part is formed such that the internal sectional area of the connecting pipe is made larger stepwise toward the upper part, and the cylinder is formed larger so that it profiles the inner surface of the connecting pipe. (Aizawa, K.)

  7. Reactor

    International Nuclear Information System (INIS)

    Ikeda, Masaomi; Kashimura, Kazuo; Inoue, Kazuyuki; Nishioka, Kazuya.

    1979-01-01

    Purpose: To facilitate the construction of a reactor containment building, whereby the inspections of the outer wall of a reactor container after the completion of the construction of the reactor building can be easily carried out. Constitution: In a reactor accommodated in a container encircled by a building wall, a space is provided between the container and the building wall encircling the container, and a metal wall is provided in the space so that it is fitted in the building wall in an attachable or detatchable manner. (Aizawa, K.)

  8. Umberto Eco - autobiograf?

    Directory of Open Access Journals (Sweden)

    Regina Lubas-Bartoszyńska

    2009-01-01

    Full Text Available This text shows that U. Eco is an autobiographer in only some sense of the word. He has not written an autobiobiographical text in which he would present a segment of his life. However, he told the history of his novelistic work and presented his intellectual train of thought in his essays, interviews, introductions to his works. There also exists an indirect autobiographism in Eco, which expresses signs of the author's life and of his personality dispersed in his interpretative and theoretical writings on literature, aesthetics, history, in his feuilletons and in his novels. Five types of autobiographism have been distinguished in Eco as well as five autobiographical strategies within the indirect autobiographism. The first strategy - a strong presence of autorial I in the text - is not sufficient and requires support of some other of the strategies discussed.

  9. EcoCount

    Directory of Open Access Journals (Sweden)

    Phillip P. Allen

    2014-05-01

    Full Text Available Techniques that analyze biological remains from sediment sequences for environmental reconstructions are well established and widely used. Yet, identifying, counting, and recording biological evidence such as pollen grains remain a highly skilled, demanding, and time-consuming task. Standard procedure requires the classification and recording of between 300 and 500 pollen grains from each representative sample. Recording the data from a pollen count requires significant effort and focused resources from the palynologist. However, when an adaptation to the recording procedure is utilized, efficiency and time economy improve. We describe EcoCount, which represents a development in environmental data recording procedure. EcoCount is a voice activated fully customizable digital count sheet that allows the investigator to continuously interact with a field of view during the data recording. Continuous viewing allows the palynologist the opportunity to remain engaged with the essential task, identification, for longer, making pollen counting more efficient and economical. EcoCount is a versatile software package that can be used to record a variety of environmental evidence and can be installed onto different computer platforms, making the adoption by users and laboratories simple and inexpensive. The user-friendly format of EcoCount allows any novice to be competent and functional in a very short time.

  10. Eco-Innovation Manual

    DEFF Research Database (Denmark)

    O'Hare, Jamie Alexander; McAloone, Tim C.; Pigosso, Daniela Cristina Antelmi

    This tool is designed to support you in identifying companies that are more likely to be willing and able to benefit from eco-innovation services. The tool provides questions to guide your research analysis, starting at the industry sector level, before progressing through the market level, down ...

  11. The Eco House

    Energy Technology Data Exchange (ETDEWEB)

    Hobbett, A. (Leicester Ecology Trust (United Kingdom))

    The Eco House is a former park keeper's lodge on the periphery of Leicester's largest public park. Taken over by Leicester Ecology Trust in 1990, the Eco House was a successor to the Trust's earlier low energy house. This has been a local authority decant house, retrofitted to show the potential for increased energy efficiency in older buildings. Many of the ideas from the earlier project were adopted by the new with a widening of its remit to include all matters of environmental concern connected with people's homes. So in addition to energy efficiency, other issues addressed include conservation of resources, wildlife, organic gardening, food production, water, environmental consumerism, recycling and health. Given that the use of energy is regarded by many environmentalists to be the single most important environmental issue today, and one which is easiest for households to address, it remains the project's dominant theme. (author)

  12. Eco-ethology

    International Nuclear Information System (INIS)

    Krebs, J.R.; Davies, N.B.

    1981-01-01

    Eco-ethology is the science of the effects of animal behaviour on animal environment and the effects of animal environment on animal behaviour, with the purpose to find out how natural selection within this control loop has formed and molded animals. N. Tinbergen was the first to make experiments on the evolution of patterns of behaviour which are influenced not only by the evolution of species but also by their adaptation to a changing environment. R.H. MacArthur then introduced mathematical modelling for better clarification of the function and adoptive value of behavioural patterns. The book gives a detailed description of both methods and a successful attempt at a synthesis. In surveys and specific contribution, an exemplary outline of eco-ethology is presented, with information, ideas and reflections that are of interest both to teachers and students. The book is addressed to biologists, zoologists, ecologists, sociologists, and evolutionary biologists and to students of these disciplines. (orig.) [de

  13. Reactors

    DEFF Research Database (Denmark)

    Shah, Vivek; Vaz Salles, Marcos António

    2018-01-01

    The requirements for OLTP database systems are becoming ever more demanding. Domains such as finance and computer games increasingly mandate that developers be able to encode complex application logic and control transaction latencies in in-memory databases. At the same time, infrastructure...... engineers in these domains need to experiment with and deploy OLTP database architectures that ensure application scalability and maximize resource utilization in modern machines. In this paper, we propose a relational actor programming model for in-memory databases as a novel, holistic approach towards......-level function calls. In contrast to classic transactional models, however, reactors allow developers to take advantage of intra-transaction parallelism and state encapsulation in their applications to reduce latency and improve locality. Moreover, reactors enable a new degree of flexibility in database...

  14. Analisa Eco-friendly Attitudes Dan Eco-friendly Behavior Terhadap Eco-friendly Intention Green Hotel Di Indonesia

    OpenAIRE

    Silvia, Lanny; Rudijanto, Diana Gabriela; Kristanti, Monika

    2017-01-01

    Kesadaran masyarakat akan lingkungan yang semakin meningkat membuat masyarakat gencar mencari hotel yang ramah lingkungan dibandingkan dengan hotel konvensional. Penelitian ini bertujuan untuk mengetahui perbedaan eco-friendly attitude, eco- friendly behavior, dan eco-friendly intention konsumen generasi x dan generasi y terhadap green hotel di Indonesia dan apakah eco-friendly attitudes dan eco-friendly behavior berpengaruh signifikan terhadap eco-friendly intention. Total responden dalam pe...

  15. Dossier Shell Eco-Marathon; Dossier Shell Eco-Marathon

    Energy Technology Data Exchange (ETDEWEB)

    Matla, P.

    2012-05-15

    Three articles address subjects concerning the annual race with highly energy efficient cars: the Shell Eco-Marathon. [Dutch] In 3 artikelen wordt aandacht besteed aan de ontwerpen voor de jaarlijkse race met superzuinige auto's, de Shell Eco-Marathon.

  16. Reactor

    International Nuclear Information System (INIS)

    Fujibayashi, Toru.

    1976-01-01

    Object: To provide a boiling water reactor which can enhance a quake resisting strength and flatten power distribution. Structure: At least more than four fuel bundles, in which a plurality of fuel rods are arranged in lattice fashion which upper and lower portions are supported by tie-plates, are bundled and then covered by a square channel box. The control rod is movably arranged within a space formed by adjoining channel boxes. A spacer of trapezoidal section is disposed in the central portion on the side of the channel box over substantially full length in height direction, and a neutron instrumented tube is disposed in the central portion inside the channel box. Thus, where a horizontal load is exerted due to earthquake or the like, the spacers come into contact with each other to support the channel box and prevent it from abnormal vibrations. (Furukawa, Y.)

  17. ECO-DRIVING MODELING ENVIRONMENT

    Science.gov (United States)

    2015-11-01

    This research project aims to examine the eco-driving modeling capabilities of different traffic modeling tools available and to develop a driver-simulator-based eco-driving modeling tool to evaluate driver behavior and to reliably estimate or measur...

  18. Developing an eco-routing application.

    Science.gov (United States)

    2014-01-01

    The study develops eco-routing algorithms and investigates and quantifies the system-wide impacts of implementing an eco-routing system. Two eco-routing algorithms are developed: one based on vehicle sub-populations (ECO-Subpopulation Feedback Assign...

  19. EcoMark 2.0

    DEFF Research Database (Denmark)

    Guo, Chenjuan; Yang, Bin; Andersen, Ove

    2015-01-01

    Eco-routing is a simple yet effective approach to substantially reducing the environmental impact, e.g., fuel consumption and greenhouse gas (GHG) emissions, of vehicular transportation. Eco-routing relies on the ability to reliably quantify the environmental impact of vehicles as they travel...... in a spatial network. The procedure of quantifying such vehicular impact for road segments of a spatial network is called eco-weight assignment. EcoMark 2.0 proposes a general framework for eco-weight assignment to enable eco-routing. It studies the abilities of six instantaneous and five aggregated models......, and experiments for assessing the utility of the impact models in assigning eco-weights. The application of EcoMark 2.0 indicates that the instantaneous model EMIT and the aggregated model SIDRA-Running are suitable for assigning eco-weights under varying circumstances. In contrast, other instantaneous models...

  20. Eco-marketing and eco-design of products

    Directory of Open Access Journals (Sweden)

    Filipović Jovan

    2007-01-01

    Full Text Available Environmental marketing (Eco-marketing, as a relatively new movement, emerged at the beginning of the 20th century, is in the growing phase of its development. Eco-labeling and other ways/types of eco-marketing are attracting more attention of consumers, since they are aware of the necessity of nature conservation and environmental protection. There has been a lot of misunderstanding and miss leadings in interpretation and substantiation of ecomarketing claims in previous period of time. One of the most concrete improvements in eco-marketing was appearance and establishment of ISO 14020 guidelines. ISO 14020 guidelines are integral part of ISO 14000 series of standards, which could be implemented in eco-marketing. At the same time, development of "green" products and marketing of "green" products, are direct positive contributions to resources reduction, environmental protection and sustainable economic development. Companies designing this kind of products can expect better position on the market, improvement of competitiveness, reduction of expenses (less raw materials, less waste, less harmful effects on the environment, raising corporate social responsibility, higher export.

  1. Umberto Eco : olemise piire kombates / Marina Grishakova

    Index Scriptorium Estoniae

    Grišakova, Marina, 1961-

    2004-01-01

    Arvustus: Eco, Umberto. Eilse päeva saar / tõlkinud Merike Pau. Tallinn : Eesti Raamat, 2003 ; Eco, Umberto. Baudolino / itaalia keelest tõlkinud [ja järelsõna:] Ülar Ploom. Tallinn : Varrak, 2003

  2. Umberto Eco og fortolkningens semiotik

    DEFF Research Database (Denmark)

    Frandsen, Finn

    1997-01-01

    En analyse af spørgsmålet om fortolkningens muligheder og grænser, sådan som det bliver formuleret og besvaret i den italienske semiotiker Umberto Ecos teoretiske forfatterskab. Problemstillingen - og dens transformationer hvad angår såvel metasprog, omfang, niveau og fokus - følges fra begyndelsen...... af 60'erne, hvor Eco er inspireret af fænomenologi og hermeneutik (f.eks. i Opera aperta), til begyndelsen af 90'erne, hvor han arbejder med tekstpragmatik og receptionssemiotik. (f.eks. i I limiti dell'interpretazione)...

  3. Eco-feedback for non-consumption

    NARCIS (Netherlands)

    Lim, V.; Jense, A.; Janmaat, J.; Funk, M.

    2014-01-01

    Eco-feedback is a strategy to increase awareness of resource use and to encourage conservation. We applied eco-feedback on household food waste with the prospective to increase awareness and explore its impact on food related decision-making. In this paper we present a prototype of an eco-feedback

  4. Eco matters; In & Out

    Directory of Open Access Journals (Sweden)

    Editorial

    2016-11-01

    uncontrolled or premature differentiation and the onset of senescence [12]. Stressing the importance of in vitro environments, even regulatory agencies like the US-FDA use in vitro manipulation as a gauge to classify cell therapies[13]. In this issue, a diverse assortment of articles ranging from the use of scaffolds for in vitro culture by Gomathysankar et al [14] to employing tools for in vivo transplantation of cells by Maiti et al [15]and Fauzi et al [16] have been published. During regenerative medicine applications, cells undergo several transitions across environments, starting with an in vivo to in vitro transition when harvested from the body and subjected to culture-expansion or tissue engineering kind of processing and then a reversal back to an in vivo environment. While the factors and materials employed in the in vitro eco-system are known, their effects are known though to an extent, some of their implications still remain unknown and the mechanisms of those implications are largely obscure [17-19]. These bunch of changes in the whole eco-system inside-out and vice versa need a meticulous and flawless assessment which is indispensable in improvising the clinical outcome of regenerative medicine applications. References Yanoa K, Watanabe N, Tsuyuki K, Ikawa T, Kasanuki H, Yamato M. Regulatory approval for autologous human cells and tissue products in the United States, the European Union, and Japan. Regenerative Therapy 2015; 1: 45-56 Schnabel M, Marlovits S, Eckhoff G, Fichtel I, Gotzen L, Vécsei V, Schlegel J. Dedifferentiation-associated changes in morphology and gene expression in primary human articular chondrocytes in cell culture. Osteoarthritis Cartilage. 2002;10(1:62-70. Caron MM, Emans PJ, Coolsen MM, Voss L, Surtel DA, Cremers A, van Rhijn LW, Welting TJ. Redifferentiation of dedifferentiated human articular chondrocytes: comparison of 2D and 3D cultures. Osteoarthritis Cartilage. 2012;20(10:1170-8. Hsiong SX, Carampin P, Kong HJ, Lee KY, Mooney DJ

  5. [Review on enterprises'eco-innovation].

    Science.gov (United States)

    Liao, Zhong Ju; Huang, Chao

    2017-12-01

    Eco-innovation is an important way to realize sustainable development. It has the dual positive externality of "knowledge spillover" and "environmental spillover", which has attracted much attention from theory and practice. In order to systematically grasp the current situation of eco-innovation, this study collected the relevant foreign literatures on eco-innovation in the past ten years, and made a systematic review of the definition, characteristics and dimensions of eco-innovation. Focusing on the theory of institutional theory, stakeholder theory and resource-based view, this paper explored the antecedents of eco-innovation. Then, this paper also demonstrated the positive and negative effects of eco-innovation on corporate financial performance, and the meditating and moderating mechanisms between eco-innovation and financial performance. Finally, based on the limitations of existing research, the future research direction was put forward.

  6. Sustainable packaging: from eco-efficiency to eco-effectiveness

    DEFF Research Database (Denmark)

    Niero, Monia; Boas, Simon H.; Olsen, Stig Irving

    2014-01-01

    According to Verghese et al (2012) sustainable packaging should be: effective in delivering its functional requirements, efficient in its use of materials, energy, and water throughout its life cycle, cyclic in its use of renewable materials and recoverability at end-of-life, and safe for people...... and the natural environment. Companies in the packaging sector have traditionally been using the Life Cycle Assessment (LCA) methodology to fulfill these requirements. However, being inspired by the eco-efficiency principle, LCA aims to reduce the negative environmental footprint of human activities by optimizing...... and emissions can be taken up as nutrients by other processes instead of reducing the amount of waste as eco-efficiency advocates. From a company point of view, LCA and C2C are complementary approaches to develop sustainable andinnovative solutions for packaging, see Figure 1. We will illustrate the challenges...

  7. ECO DESIGN IN DESIGN PROCESS

    Directory of Open Access Journals (Sweden)

    PRALEA Jeni

    2014-05-01

    Full Text Available Eco-design is a new domain, required by the new trends and existing concerns worldwide, generated by the necessity of adopting new design principles. New design principles require the designer to provide a friendly relationship between concept created, environment and consume. This "friendly" relationship should be valid both at present and in the future, generating new opportunities for product, product components or materials from which it was made. Awareness, by the designer, the importance of this new trend, permits the establishment of concepts that have as their objective the protection of present values and ensuring the legacy of future generations. Ecodesig, by its principles, is involved in the design process, from early stage, the stage of product design. Priority objective of the designers will consist in reducing the negative effects on the environment through the entire life cycle and after it is taken out of use. The main aspects of the eco-design will consider extending product exploitation, make better use of materials, reduction of emission of waste. The design process in the "eco"domein must be started by selecting the function of the concept, materials and technological processes, causing the shape of macro and micro geometric of the product through an analysis that involves optimizing and streamlining the product. This paper presents the design process of a cross-sports footwear concept, built on the basis of the principles of ecodesign

  8. Eco-friendly Development Of Industry

    International Nuclear Information System (INIS)

    An, Gi Cheol; Park, Hun; Lee, Dong Jin; Ryu, Sang Hui

    1998-02-01

    This book reports eco-friendly development of industry, which has summary on bring up the issue and research way and system of research. It deals with current state of affairs on eco-friendly development of industry and the case of developed countries such as necessity and meaning of eco-friendly development industry, prospect and change of the tendency, environmental issue by field in Korea like the steel industry, nonferrous metal industry, auto industry, and cement industry and general policy for eco-friendly development of industry.

  9. User's guide to the biosphere code ECOS

    International Nuclear Information System (INIS)

    Kane, P.; Thorne, M.C.

    1984-10-01

    This report constitutes the user's guide to the biosphere model ECOS and provides a detailed description of the processes modelled and mathematical formulations used. The FORTRAN code ECOS is an equilibrium-type compartmental biosphere code. ECOS was designed with the objective of producing a general but comprehensive code for use in the assessment of the radiological impact of unspecified geological repositories for radioactive waste. ECOS transforms the rate of release of activity from the geosphere to the rate of accumulation of weighted committed effective dose equivalent (dose). Both maximum individual dose (critical group dose) and collective dose rates may be computed. (author)

  10. Triple helix interactions for eco-innovation

    DEFF Research Database (Denmark)

    Hermann, Roberto Rivas; Riisgaard, Henrik; Remmen, Arne

    the role of science parks in promoting eco-innovation. This study uses qualitative data gathered in two units of analysis: Panama Canal Authority and City of Knowledge Science Park. The study examines how Triple Helix interactions have built the regional system of eco-innovation at the Panama Canal...

  11. Eco-efficiency in industrial production

    NARCIS (Netherlands)

    von Raesfeld Meijer, Ariane M.; de Bakker, F.G.A.; Groen, Arend J.

    2001-01-01

    English AbstractThis report of the MATRIC project investigated 'Eco-efficiency in industrial production'. After a general introduction into the domain of eco-efficiency, the first part of this report further focusses on the organisation of Product-Oriented Environmental Management (POEM), which is

  12. EcoGene 3.0.

    Science.gov (United States)

    Zhou, Jindan; Rudd, Kenneth E

    2013-01-01

    EcoGene (http://ecogene.org) is a database and website devoted to continuously improving the structural and functional annotation of Escherichia coli K-12, one of the most well understood model organisms, represented by the MG1655(Seq) genome sequence and annotations. Major improvements to EcoGene in the past decade include (i) graphic presentations of genome map features; (ii) ability to design Boolean queries and Venn diagrams from EcoArray, EcoTopics or user-provided GeneSets; (iii) the genome-wide clone and deletion primer design tool, PrimerPairs; (iv) sequence searches using a customized EcoBLAST; (v) a Cross Reference table of synonymous gene and protein identifiers; (vi) proteome-wide indexing with GO terms; (vii) EcoTools access to >2000 complete bacterial genomes in EcoGene-RefSeq; (viii) establishment of a MySql relational database; and (ix) use of web content management systems. The biomedical literature is surveyed daily to provide citation and gene function updates. As of September 2012, the review of 37 397 abstracts and articles led to creation of 98 425 PubMed-Gene links and 5415 PubMed-Topic links. Annotation updates to Genbank U00096 are transmitted from EcoGene to NCBI. Experimental verifications include confirmation of a CTG start codon, pseudogene restoration and quality assurance of the Keio strain collection.

  13. EcoGene 3.0

    Science.gov (United States)

    Zhou, Jindan; Rudd, Kenneth E.

    2013-01-01

    EcoGene (http://ecogene.org) is a database and website devoted to continuously improving the structural and functional annotation of Escherichia coli K-12, one of the most well understood model organisms, represented by the MG1655(Seq) genome sequence and annotations. Major improvements to EcoGene in the past decade include (i) graphic presentations of genome map features; (ii) ability to design Boolean queries and Venn diagrams from EcoArray, EcoTopics or user-provided GeneSets; (iii) the genome-wide clone and deletion primer design tool, PrimerPairs; (iv) sequence searches using a customized EcoBLAST; (v) a Cross Reference table of synonymous gene and protein identifiers; (vi) proteome-wide indexing with GO terms; (vii) EcoTools access to >2000 complete bacterial genomes in EcoGene-RefSeq; (viii) establishment of a MySql relational database; and (ix) use of web content management systems. The biomedical literature is surveyed daily to provide citation and gene function updates. As of September 2012, the review of 37 397 abstracts and articles led to creation of 98 425 PubMed-Gene links and 5415 PubMed-Topic links. Annotation updates to Genbank U00096 are transmitted from EcoGene to NCBI. Experimental verifications include confirmation of a CTG start codon, pseudogene restoration and quality assurance of the Keio strain collection. PMID:23197660

  14. Snapshots from a leading eco-city

    DEFF Research Database (Denmark)

    Mehlsen, Camilla

    2009-01-01

    The government of Singapore wants to make Singapore the leading Eco-city in Asia. Professor Kim Chuan Goh explains why this might be an achievable goal.......The government of Singapore wants to make Singapore the leading Eco-city in Asia. Professor Kim Chuan Goh explains why this might be an achievable goal....

  15. ECO steam explosion experiments on the conversion of thermal into mechanical energy

    International Nuclear Information System (INIS)

    Cherdron, W.; Kaiser, A.; Schuetz, W.; Will, H.

    2001-01-01

    In case of a steam explosion, e.g. as a consequence of a severe reactor accident, part of the thermal energy of the melt is transferred into mechanical energy. At Forschungszentrum Karlsruhe, so-called ECO experiments, are being directed to measure the conversion factor under well-defined conditions. In ECO, alumina from a thermite reaction is used as a simulating material instead of corium. Dimensions of the test facility as well as major test conditions, e.g. temperature and release mode of the melt, water inventory and test procedure, are based on the former PREMIX experimental series. In the paper, results of the first test, ECO 01, are given. (orig.)

  16. Experimental investigation into fast pyrolysis of biomass using an entrained flow reactor

    Science.gov (United States)

    Bohn, M.; Benham, C.

    1981-02-01

    Pyrolysis experiments were performed with steam as a carrier gas and two different feedstocks - wheat straw and powdered material derived from municipal solid waste (ECO-II TM). Reactor wall temperature was varied from 7000 to 1400 C. Gas composition data from the ECO-II tests were comparable to previously reported data but ethylene yield appeared to vary with reactor wall temperature and residence time. The important conclusion from the wheat straw tests is that olefin yields are about one half that obtained from ECO-II. Evidence was found that high olefin yields from ECO-II are due to the presence of plastics in the feedstock.

  17. Does Nationality Matter in Eco-Behaviour?

    Directory of Open Access Journals (Sweden)

    Michelle Bonera

    2017-09-01

    Full Text Available Although many authors agree on the role of personal values in explaining the main determinants of eco-behaviour, disagreement about the effects of socio-demographic features exists, particularly about the effect of nationality. In an attempt to fill this gap in the literature, this paper contributes to the debate surrounding the main determinants of eco-behaviour, based on a cross-country analysis. To test the role of nationality and personal values in eco-behaviour, a linear regression model involving 353 Chinese and 333 Italian subjects was performed. A stepwise analysis was then conducted to identify the main significant effects. The explorative and stepwise analyses confirmed that nationality is significant when explaining individual eco-behaviour, for both Italian and Chinese people. Moreover, the linear regression model, as a stepwise analysis, showed that regulatory focus and universalism are the main personal values influencing ecological behaviour. Differences emerging from the analysis show significant differences in terms of eco-behaviour and eco-awareness, for the two countries involved in the analysis, that might lead companies to adopt different marketing strategies when promoting eco-products.

  18. Eco-marketing in industrial enterprise activities

    OpenAIRE

    N.M. Chupryna

    2015-01-01

    The aim of the article. The aim of the article is determination of the areas of industrial enterprise’s development and detection of the specificity of their activity in terms of environmental priorities. The results of the analysis. The analysis of the research and publications of the leading scholars on the eco-marketing’s problem was conducted. The main factors of eco-marketing’s mechanism use were considered. Eco-marketing was determined as an important tool of the enterprises’ modern ...

  19. Optimization of some eco-energetic systems

    International Nuclear Information System (INIS)

    Purica, I.; Pavelescu, M.; Stoica, M.

    1976-01-01

    An optimization problem of two eco-energetic systems is described. The first one is close to the actual eco-energetic system in Romania, while the second is a new one, based on nuclear energy as primary source and hydrogen energy as secondary source. The optimization problem solved is to find the optimal structure of the systems so that the objective functions adopted, namely unitary energy cost C and total pollution P, to be minimum at the same time. The problem can be modelated with a bimatrix cooperative mathematical game without side payments. We demonstrate the superiority of the new eco-energetic system. (author)

  20. Eco-Material Selection for Auto Bodies

    Energy Technology Data Exchange (ETDEWEB)

    Mayyas, Ahmad T [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Omar, Mohammed [Masdar Institute of Science & Technology; Hayajneh, Mohammed T. [Jordan University of Science and Technology

    2017-09-25

    In the last decades, majority of automakers started to include lightweight materials in their vehicles to meet hard environmental regulations and to improve fuel efficiency of their vehicles. As a result, eco-material selection for vehicles emerged as a new discipline under design for environment. This chapter will summarize methods of eco-material selections for automotive applications with more emphasis into auto-bodies. A set of metrics for eco-material selection that takes into account all economic, environmental and social factors will be developed using numerical and qualitative methods. These metrics cover products' environmental impact, functionality and manufacturability, in addition to the economic and societal factors.

  1. 'Eco' For Whom? Envisioning Eco-urbanism in the Sino-Singapore Tianjin Eco-city, China

    OpenAIRE

    Caprotti, Federico; Springer, Cecilia; Harmer, Nichola

    2015-01-01

    Eco-cities have attracted international attention from governments, corporations, academics and other actors seeking to use sustainable urban planning to reduce urban environmental impacts. China has devoted significant political will and economic resources to the development of new-build eco-city projects, reflecting the Chinese government's goals to build a 'harmonious society' in which environmental sustainability and social stability are mutually reinforcing. We critically analyse the cas...

  2. Policy Instruments for Eco-Innovation in Asian Countries

    OpenAIRE

    Jang, Eun; Park, Mi; Roh, Tae; Han, Ki

    2015-01-01

    Eco-innovation globally emerged as an effort to implement sustainable development. States and firms established and implemented policies and strategies for eco-innovation as one route to achieving sustainable development. Eco-innovation has been facilitated in developed countries, specifically OECD members and European countries, through action plans. Recently, eco-innovation policies have emerged in developing countries. Thus, this study analyzes eco-innovation policies in Asian countries. ...

  3. ECO-FRIENDLY SYNTHESIS OF SILVER NANOPARTICLES ...

    African Journals Online (AJOL)

    userpc

    Keywords: Silver nanoparticles; UV-Visible Spectrophotometry; Dynamic Light Scattering;. Transmission ... The eco- friendly protocol developed led to the synthesis ... lamp for. 5 minutes. (Omidiet al.,. 2014).Authentication of the formation of.

  4. ECO-SUSTAINABLE DEVELOPMENT AND ROMANIAN TOURISM

    Directory of Open Access Journals (Sweden)

    MARIANA BĂLAN

    2014-05-01

    Full Text Available In a changing world, the development of eco-sustainable tourism is manifested in the form of interaction of elements compatible with each other in various dimensions: economic, environmental, human, technological, environmental, ethical, etc. Through eco-sustainable tourism aims to satisfy the present needs of tourists in favor and not in detrimental to the interests of future generations, along with educating them in the spirit of reducing negative environmental impacts. This paper provides a brief overview of the tourism - ecology - sustainable development relationship, by highlighting the evolutionary theoretical considerations regarding the concept of tourism, the need for sustainable tourism development, the ecology as a priority in the development and integration of tourism activities within the coordinates the eco-sustainable development. It also discusses the main indicators used to characterize the tourism activities in Romania in the context of eco-sustainable development.

  5. EPA EcoBox Tools by Stressors

    Science.gov (United States)

    Eco-Box is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases

  6. Eco friendly expectations and limitations in daycare

    DEFF Research Database (Denmark)

    Husted, Mia

    This presentation elaborates on expectations and limitations of eco-friendly pedagogical responses to the sustainability crisis. The pedagogical perspectives on eco-friendly responses originates from an action research project involving pedagogues in day care centers and teachers at a University ...... College in Denmark. As part of the project they were asked to explore, elaborate and develop new pedagogical actions and perspectives related to future relationships between human beings and our common nature......This presentation elaborates on expectations and limitations of eco-friendly pedagogical responses to the sustainability crisis. The pedagogical perspectives on eco-friendly responses originates from an action research project involving pedagogues in day care centers and teachers at a University...

  7. ECO-INNOVATION FOR A SUSTAINABLE FUTURE

    Directory of Open Access Journals (Sweden)

    RATIU Mariana

    2014-05-01

    Full Text Available Eco-innovation is any form of innovation resulting in or aiming at significant and demonstrable progress towards the goal of sustainable development, through reducing impacts on the environment, enhancing resilience to environmental pressures, or achieving a more efficient and responsible use of natural resources. States and governments of the world, different institutions and organizations actively involved and aware in public policies, strategies and actions, reaffirm their commitments and reassess actions in order to achieve a truly sustainable development. In the common vision and the resolutions and other documents of the United Nations Conference on Sustainable Development, Rio+20, the words "environment", "innovation", "green economy" appear very often and almost always along the same context, to achieve the objectives of the sustainable development. The objectives of EU's Europe 2020 strategy for smart, sustainable and inclusive growth, are being implemented through a number of Flagship Initiatives addressing the main challenges, like “Innovation for a sustainable Future - The Eco-innovation Action Plan (EcoAP”. Eco-innovation Observatory developed the Eco-Innovation index, the first tool to assess and illustrate eco-innovation performance across the EU Member States. Like in all fields, in textiles and leather field, eco-innovation is present and there are a lot of tools available that measure environmental damage and help manufacturers and brands become more sustainable. Eco-innovation is not just a trendy concept but a reality and a necessity nowadays, a way to achieve a sustainable future for ourselves and future generations.

  8. Development of Eco-Industry Sector

    OpenAIRE

    Mariana Ioviţu

    2012-01-01

    Measures to encourage development of Eco-industries represent an important part of the programs of many countries; analyses of different international organisms reveal a series of advantages of this sector for economy. According to OCDE “The environmental goods and services industry consists of activities which produce goods and services to measure, prevent, limit, minimize or correct environmental damage to water, air and soil, as well as problems related to waste, noise and Eco-systems”. Th...

  9. From “eco-pessimism” to “eco-optimism” ECOMOG And The West ...

    African Journals Online (AJOL)

    From “eco-pessimism” to “eco-optimism” ECOMOG And The West African Integration Process. Emmanuel Kwesi Aning. Abstract. No Abstract African Journal of Political Science Vol.4(1) 1999: 21-39. Full Text: EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT.

  10. Eco-Schools campaign. The European projects

    International Nuclear Information System (INIS)

    Blanchini, P.; Marino, G.

    1999-01-01

    The Foundation for Environmental Education in Europe (FEEE) was established in 1981; since then it was been actively promoting and delivering education through a series of successful internationals programmes launched in 21 different European nations. The Eco-School Campaign aims to raise students' awareness of environment issues through classroom study, and provide an integrated system for environmental management of schools based on EMAS (with waste, water and energy management as priority areas). As a process of facilitating sustainable developpement at a local level, pupils are encouraged to take an active role in mental impact of the schools. The Eco-Schools Green Flag, awarded to schools with high achievement in their Programme, is a recognised and respected eco-label for environmental education and performance. In Italy the National Eco-Schools operator was asked to set up a ten-schools pilot programme in the region Friuli Venezia Giulia: these are very first national schools that are likely to become 'Eco-Schools'

  11. ENTREPRENEURIAL ECO-SYSTEMS & REGIONAL ALLIANCES

    Directory of Open Access Journals (Sweden)

    Joe ENGLISH

    2015-05-01

    Full Text Available The study of universities and their role in enterprise development, support and education is very mature. However when Isenberg coined the term ‘entrepreneurial ecosystem’ and suggested that higher education was one of the key foundation blocks of a regional eco-system it threw open the concept of the university having a wider role in the overall business, economic and civic life of a region. What is this wider role, and how do the universities themselves view their place in this evolving entrepreneurial eco-system? How do they fit into Regional Alliances set up to build regional economic development? This paper introduces two pilot Alliances that have been recently formed using both the education institutes and the wider eco-system to drive Innovation and Graduate Employability (The SHIP and REAL Alliances.

  12. Eco-efficiency and control loop configuration for recycle systems

    Energy Technology Data Exchange (ETDEWEB)

    Munir, Muhammad Tajammal; Yu, Wei; Young, Brent P. [The University of Auckland, Auckland (New Zealand)

    2013-05-15

    To integrate measurements of eco-efficiency with control loop configuration has become an important topic since all industrial processes/plants are requested to increase their eco-efficiency. The exergy eco-efficiency factor, a new measure of eco-efficiency for control loop configuration, has been developed recently. The exergy eco-efficiency factor is based on the thermodynamic concept of exergy, which can be used to analyze a process in terms of its efficiency. The combination of the relative gain array (RGA), NI, CN, dynamic RGA, and the exergy eco-efficiency factor will help guide the process designer to find the optimal control design with low operating cost/eco-efficiency. In this paper, we validate the proposed exergy eco-efficiency factor for processes with recycles which are very common industrially.

  13. Eco-efficiency and control loop configuration for recycle systems

    International Nuclear Information System (INIS)

    Munir, Muhammad Tajammal; Yu, Wei; Young, Brent P.

    2013-01-01

    To integrate measurements of eco-efficiency with control loop configuration has become an important topic since all industrial processes/plants are requested to increase their eco-efficiency. The exergy eco-efficiency factor, a new measure of eco-efficiency for control loop configuration, has been developed recently. The exergy eco-efficiency factor is based on the thermodynamic concept of exergy, which can be used to analyze a process in terms of its efficiency. The combination of the relative gain array (RGA), NI, CN, dynamic RGA, and the exergy eco-efficiency factor will help guide the process designer to find the optimal control design with low operating cost/eco-efficiency. In this paper, we validate the proposed exergy eco-efficiency factor for processes with recycles which are very common industrially

  14. Looking for a Framework for Analyzing Eco-innovation Dynamics

    DEFF Research Database (Denmark)

    Yang, Yan

    2011-01-01

    Looking for a Framework for Analyzing Eco-innovation Dynamics: A Triple Helix Model of Innovation Perspective.......Looking for a Framework for Analyzing Eco-innovation Dynamics: A Triple Helix Model of Innovation Perspective....

  15. SUSTAINABLE ECONOMIC GROWTH AND ECO-EFFICIENCY

    Directory of Open Access Journals (Sweden)

    Mariana\tLUPAN

    2015-06-01

    Full Text Available The current economic and social contexts have brought forth the issues regarding growth and sustainability. The concept of growth has always been linked to an increase in consumption levels, and this inevitably led to pressures on the environment and on the resources that support human activity. Given these circumstances, the question whether we can avoid an environmental disaster while maintaining economic growth, has become more stringent. We chose to approach this aspect by examining the concept of eco-efficiency, a concept that embodies aspects of both economic efficiency and environmental efficiency. Eco-efficiency can be regarded as the effectiveness with which resources are used in order to create products and services that satisfy human needs. Based on this idea, the last decade has produced an increasing number of studies on eco-efficiency and how it can be measured and implemented in the production of goods and services, but also in the field regarding demand patterns. An analysis regarding the aspects of eco-efficiency at the macro level of the Romanian economy is in line with the current environmental concerns, thus I have chosen to cover these questions, as well as the evolution of the locale economy towards a more sustainable development. The outcome of the examined aspects shows that, in spite of an increase in eco-efficiency levels, energy and material consumption and emissions have increased. This raises the question if measuring economic and environmental efficiency by reporting to the GDP value is becoming obsolete and if there is a need to revaluate eco-efficiency indicators in order to measure the transition to a greener and more sustainable development from different points of view.

  16. Eco-Innovation in the Value Chain

    DEFF Research Database (Denmark)

    McAloone, Tim C.; Mougaard, Krestine; Restrepo-Giraldo, John Dairo

    2010-01-01

    processes is often reactive, resulting in a retrospective and insufficient approach. This paper describes the mechanisms, opportunities and barriers for the actual realisation of value chain based eco-innovation, together with a first indication of a methodical approach to realising eco-innovation.......It is well known that companies face challenges integrating environmental considerations into their product development processes and there is an established body of research focusing on ways and means to aid this. The approach for integrating environmental considerations into product development...

  17. An R&D Management Framework for Eco-Technology

    OpenAIRE

    Hideki Kobayashi; Masahiro Kato; Yukishige Maezawa; Kenji Sano

    2011-01-01

    Although research and development (R&D) affects new value-added creation, including that related to environmental aspects, there is little literature dealing with the integration of R&D management and eco-value. Here, eco-value of technology is defined as the advantage of environmental competitiveness in the market. This paper proposes a framework of R&D management of eco-technology (RDMOET), consisting of: (1) future research for sustainability; (2) making an original eco-theme p...

  18. The economic value of corporate eco-efficiency

    NARCIS (Netherlands)

    Guenster, N.; Bauer, R.; Derwall, J.M.M.; Koedijk, C.G.

    2011-01-01

    This study adds new insights to the long-running corporate environmental-financial performance debate by focusing on the concept of eco-efficiency. Using a new database of eco-efficiency scores, we analyse the relation between eco-efficiency and financial performance from 1997 to 2004. We report

  19. Eco2 Cities : Ecological Cities as Economic Cities

    OpenAIRE

    Suzuki, Hiroaki; Dastur, Arish; Moffatt, Sebastian; Yabuki, Nanae; Maruyama, Hinako

    2010-01-01

    This book provides an overview of the World Bank's Eco2 cities : ecological cities as economic cities initiative. The objective of the Eco2 cities initiative is to help cities in developing countries achieve a greater degree of ecological and economic sustainability. The book is divided into three parts. Part one describes the Eco2 cities initiative framework. It describes the approach, be...

  20. Constraints in the Adoption of Eco Friendly Conservation Practices

    Directory of Open Access Journals (Sweden)

    L. Murali Krishnan

    2016-05-01

    Insect pest and diseases management, Lack of awareness of agro environmental problems and farmer’s attitude towards the Eco Friendly Conservation Practices are the major constraints in the adoption of Eco Friendly Conservation Practices.The study suggests educational, extension & training strategies for fostering the adopted of ECO friendly Conservation Practices.

  1. Modelling Of Eco-innovation Diffusion: The EU Eco-label

    Directory of Open Access Journals (Sweden)

    KIJEK TOMASZ

    2015-03-01

    Full Text Available The aim of this article is to carry out a theoretical and empirical analysis of the process of eco-label diffusion. Eco-labels allow consumers to identify products and services that have a reduced environmental impact during their life cycle. Thus, they are aimed at diminishing the information gap between sellers and buyers. The results of the estimation using the Bass model indicate that the diffusion of the EU eco-label has been most dynamic in countries such as Hungary, Poland, Denmark, Germany and France. In turn, the scope of diffusion (absolute saturation level reached the highest value for companies in France and Italy. In addition, the results of the study confirm the stimulating impact of the scope of eco-label diffusion on consumer awareness of environmental issues. This finding points to the need for environmental education among consumers, which could in turn encourage firms to undertake pro-environmental actions.

  2. Eco-Systemic Analysis of Anorexia Nervosa.

    Science.gov (United States)

    Sheppy, Margarette I.; And Others

    1988-01-01

    Tested eco-systemic approach to understanding of anorexia nervosa. Compared 30 anorexics and parents to 34 matched control subjects and parents. Found that, compared to controls, families of anorexics were less supportive, helpful, and committed to each other. Family interactions perceived by anorexics were characterized by overprotective,…

  3. Clash of the eco-sciences

    DEFF Research Database (Denmark)

    Blok, Anders

    2011-01-01

    South. The performativity programme, it is concluded, stands to gain from conceptualizing politics as dynamic assemblages of collective actors, sites of contestation and technologies of witnessing. Re-framing performativity in this direction allows for a reintegration of economics into a wider political...... ecology of contested eco-sciences....

  4. A declaration of eco-ethics

    Directory of Open Access Journals (Sweden)

    John Cairns Jr.

    2002-11-01

    Full Text Available Eco-ethics is the essential foundation for sustainable use of the planet. Such a foundation must consist of a series of value judgments to which humanity is committed. This declaration is a tentative attempt to provide some illustrative examples.

  5. Eco-Cities: Possible or Purely Utopian?

    Science.gov (United States)

    2009-12-01

    00-2009 to 00-00-2009 4. TITLE AND SUBTITLE Eco-Cities: Possible or Purely Utopian? 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT...2005, Disney modified their building plans for Hong Kong Disneyland by shifting the angle of the front gate by twelve degrees in order to abide by

  6. Eco-Friendly Alternative Refrigeration Systems

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 6; Issue 10. Eco-Friendly Alternative Refrigeration Systems - Magnetic and ... Author Affiliations. S S Verma1. Deptartment of Physics, Sant Longowal Institute of Engineering and Technology Longowal, District Sangrur, Punjab 148 106, India.

  7. Eco-design of power transmissions systems

    International Nuclear Information System (INIS)

    Wang, W.

    2011-01-01

    The demand to preserve the environment and form a sustainable development is greatly increasing in the recent decades all over the world, and this environmental concern is also merged in electrical power industry, resulting in many eco-design approaches in Transmission and Distribution (T and D) industries. As a method of eco-design, Life Cycle Assessment (LCA) is a systematic tool that enables the assessment of the environmental impacts of a product or service throughout its entire life cycle, i.e. raw material production, manufacture, distribution, use and disposal including all intervening transportation steps necessary or caused by the product's existence. In T and D industries, LCA has been done for a lot of products individually, in order to see one product's environmental impacts and to seek for ways of improving its environmental performance. This eco-design for product approach is a rather well-developed trend, however, as only a single electrical product cannot provide the electrical power to users, electrical system consists of a huge number of components, in order to investigate system's environmental profile, the entire environmental profiles of different composing products has to be integrated systematically, that is to say, a system approach is needed. Under this philosophy, the study 'Eco-design of Power Transmission Systems' is conducted in this thesis, with the purpose of analysing the transmission systems' environmental impacts, locating the major environmental burden sources of transmission systems, selecting and/or developing methodologies of reducing its environmental impacts. (author)

  8. EcoDesign and future environmental impacts

    DEFF Research Database (Denmark)

    Jeswiet, Jack; Hauschild, Michael Zwicky

    2005-01-01

    This paper describes the relation between EcoDesign and Life Cycle Engineering; both include Product Engineering as a focal point. Product Engineering includes both product design and manufacture, two fields which are changing quickly. In addition, this paper shows where future changes can be exp...

  9. ECO-Report - Great issues, great diversions

    Science.gov (United States)

    Janie Canton-Thompson; Jim Saveland; Sharon Ritter; Yvette K Ortega; Dean F. Pearson; Mick Harrington; Elaine Kennedy Sutherland; Clint Cook; Greg Jones

    2004-01-01

    ECO-Report is an annual Rocky Mountain Research Station (RMRS) publication which contains a set of articles showcasing the Bitterroot Ecosystem Management Research Project (BEMRP) research projects and activities. The articles are concise, user-friendly, and designed to inform a broad range of audiences interested in ecosystem management. Articles featured in...

  10. How To Develop Ngorongoro As An Eco Tourism Destination : Eco Tourism In Ngorongoro

    OpenAIRE

    Londo, Amwewa; Londo, Amwewa

    2008-01-01

    In the third World Countries there is a need to develop and promote Tourism industry. Tourism Sector needs to be promoted to push economic development and increase the number of employments This research aims to find out whether eco-tourism sector at Ngorongoro Conservation area generates suistanable profit to local people. Qualitative reasearch was used to analyze eco-tourism value that leads to better understanding of different supports methods being used by government to local peopl...

  11. The Study of Critical Eco-Linguistic in Green Discourse: Prospective Eco-Linguistic Analysis

    Directory of Open Access Journals (Sweden)

    Tommi Yuniawan

    2017-10-01

    Full Text Available Eco-linguistic studies are influenced by one of the other interdisciplinary sciences, namely critical discourse analysis. The combination of these two sciences is called critical eco-linguistic studies. Critical eco-linguistic examines the discourse about the environment and various forms of discourse and their ideology which concerns people and the environment. The environmental discourse with all its manifestations (oral text, written text is called green discourse. To that end, critical eco-linguistic dictates the linguistic aspects contained in the green discourse. Utilization of lingual units in green discourse will affect the sense and logic of people involved in the discourse, ie the writers and readers or the speakers and the speakers. What is recorded in their cognition, will affect their attitudes and actions to the environment. If green discourse is constructive, then their attitude and actions to the environment are constructive. Conversely, if green discourse is more destructive and exploitative, then their attitudes and actions towards the environment will also be affected towards destruction and exploitation. For this reason, critical eco-linguistic studies in green discourse deserve to be given space as a form of prospective eco-linguistic analysis.

  12. Establishment of an eco-compensation fund based on eco-services consumption.

    Science.gov (United States)

    Liu, Moucheng; Yang, Lun; Min, Qingwen

    2018-04-01

    Eco-compensation is a type of institutional arrangement that uses economic measures to adjust the relationships among stakeholders in order to conserve and/or sustainably use ecosystem services. The externality of the value of ecosystem services is one of the theoretical bases for eco-compensation. Different types of ecosystem services are consumed by people from different regions. Some are consumed by people living where the services originate, while some are carried by rivers, wind, vehicles or other natural or manmade means to other areas. Thus, the flow and consumption of ecosystem services should be seen as the basis for establishing eco-compensation funds. This paper uses satellite images of the Zhang-Cheng area near Beijing in 2013 to discuss how to establish an eco-compensation fund for stakeholders in this area. Firstly, six important types of ecosystem services in the Zhang-Cheng area were identified based on ecological function zoning, and the value of these ecosystem services was calculated based on ecological pricing methods. Secondly, the field intensity model from physics was used to analyze where Zhang-Cheng area ecosystem services flowed and calculate how much of these services were used by other areas. Thirdly, based on this analysis and calculation, the paper proposes the rates that different stakeholders should invest in the eco-compensation fund, based on their consumption of eco-services. Copyright © 2018 Elsevier Ltd. All rights reserved.

  13. An R&D Management Framework for Eco-Technology

    Directory of Open Access Journals (Sweden)

    Kenji Sano

    2011-08-01

    Full Text Available Although research and development (R&D affects new value-added creation, including that related to environmental aspects, there is little literature dealing with the integration of R&D management and eco-value. Here, eco-value of technology is defined as the advantage of environmental competitiveness in the market. This paper proposes a framework of R&D management of eco-technology (RDMOET, consisting of: (1 future research for sustainability; (2 making an original eco-theme portfolio and roadmap; (3 gap analysis and implementation of new eco-themes; and (4 eco-value evaluation. (1 and (4 are new processes compared with conventional R&D management. Through practice at the Corporate R&D Center of Toshiba Corporation, the usefulness of the proposed framework is verified from the viewpoint of not only technological eco-innovation, but also that of organizational learning for environmental sustainability.

  14. Determinants of eco-efficiency in the Chinese industrial sector.

    Science.gov (United States)

    Fujii, Hidemichi; Managi, Shunsuke

    2013-12-01

    This study measures productive inefficiency within the context of multi-environmental pollution (eco-efficiency) in the Chinese industrial sector. The weighted Russell directional distance model is applied to measure eco-efficiency using production technology. The objective is to clarify how external factors affect eco-efficiency. The major findings are that both foreign direct investment and investment for pollution abatement improve eco-efficiency as measured by air pollutant substances. A levy system for wastewater discharge improves eco-efficiency as measured by wastewater pollutant substances. However, an air pollutant levy does not significantly affect eco-efficiency as measured by air pollutants. Copyright © 2013 The Research Centre for Eco-Environmental Sciences, Chinese Academy of Sciences. Published by Elsevier B.V. All rights reserved.

  15. Eco-Efficiency Indicators for Urban Transport

    Directory of Open Access Journals (Sweden)

    Patrick Moriarty

    2015-06-01

    Full Text Available This paper focuses on urban passenger transport eco-efficiency, which can be defined as the production of maximum benefits to society while minimising environmental impacts from urban transport’s inputs of energy and materials. Researchers have intensively studied transport’s varied environmental impacts, particularly through Life Cycle Assessment; this paper argues that primary transport energy per capita is presently the best measure of impact. Although transport’s societal benefits have generally been regarded as self-evident, access to out-of-home activities, not passenger-km, should be considered as the fundamental useful output of an urban transport system, since transport is a derived demand. We argue that access levels are roughly similar in all high-income OECD cities, so that these cities can be ranked on transport eco-efficiency simply on the basis of per capita primary transport energy.

  16. The eco-efficiency of tourism

    International Nuclear Information System (INIS)

    Goessling, Stefan; Peeters, Paul; Ceron, Jean-Paul; Dubois, Ghislain; Patterson, Trista; Richardson, Robert B.

    2005-01-01

    The use of fossil energy is one of the major environmental problems associated with tourism and travel. Consequently, the need to limit fossil energy use has been highlighted as a precondition for achieving sustainable tourism development. However, tourism is also one of the most important sectors of the world economy, and fears have thus been expressed by the tourist industry and its organisations that increasing energy prices (for example, as a result of eco-taxes) could substantially decrease the economic welfare of countries and destinations. In this article, the interplay of environmental damage and economic gains is thus analysed within the context of tourism. Carbon dioxide-equivalent emissions are assessed in relation to the revenues generated, allowing for conclusions about the eco-efficiency of tourism

  17. Going green with eco-friendly dentistry.

    Science.gov (United States)

    Avinash, Bhagyalakshmi; Avinash, B S; Shivalinga, B M; Jyothikiran, S; Padmini, M N

    2013-07-01

    Eco-friendly dentistry is currently transforming the medical and dental field to decrease its affect on our natural environment and reduce the amount of waste being produced. Eco-friendly dentistry uses a sustainable approach to encourage dentists to implement new strategies to try and reduce the energy being consumed and the large amount of waste being produced by the industry. Many reasonable, practical and easy alternatives do exist which would reduce the environmental footprint of a dental office were it to follow the 'green' recommendations. Dentist should take a leading role in the society by implementing 'green' initiatives to lessen their impact on the environment. This article provides a series of 'green' recommendations that dentists around the world can implement to become a leading Stewards of the environment.

  18. Eco-ethology. Oeko-Ethologie

    Energy Technology Data Exchange (ETDEWEB)

    Krebs, J.R.; Davies, N.B.

    1981-01-01

    Eco-ethology is the science of the effects of animal behaviour on animal environment and the effects of animal environment on animal behaviour, with the purpose to find out how natural selection within this control loop has formed and molded animals. N. Tinbergen was the first to make experiments on the evolution of patterns of behaviour which are influenced not only by the evolution of species but also by their adaptation to a changing environment. R.H. MacArthur then introduced mathematical modelling for better clarification of the function and adoptive value of behavioural patterns. The book gives a detailed description of both methods and a successful attempt at a synthesis. In surveys and specific contribution, an exemplary outline of eco-ethology is presented, with information, ideas and reflections that are of interest both to teachers and students. The book is addressed to biologists, zoologists, ecologists, sociologists, and evolutionary biologists and to students of these disciplines.

  19. The eco-efficiency of tourism

    Energy Technology Data Exchange (ETDEWEB)

    Goessling, Stefan [Department of Service Management, Lund University, Box 882, 251 08 Helsingborg (Sweden); Peeters, Paul [NHTV Breda University, Centre for Sustainable Tourism and Transport, P.O. Box 3917, 4800 DX Breda (Netherlands); Ceron, Jean-Paul [Centre de Recherche en Droit de l' Environnement, de l' Amenagement et de l' Urbanisme (CRIDEAU), Universite de Limoges, 34 Rue Dupleix, 87000 Limoges (France); Dubois, Ghislain [Tourisme Environnement Consultants (TEC), 89 Rue de la Republique, 13002 Marseille (France); Patterson, Trista [University of Siena, Department of Science and Technology for Physical Chemistry in Biosystems, Via Della Diana 2A, 53100 Siena (Italy); Richardson, Robert B. [1024 Philip Street, New Orleans, LA 70130 (United States)

    2005-09-15

    The use of fossil energy is one of the major environmental problems associated with tourism and travel. Consequently, the need to limit fossil energy use has been highlighted as a precondition for achieving sustainable tourism development. However, tourism is also one of the most important sectors of the world economy, and fears have thus been expressed by the tourist industry and its organisations that increasing energy prices (for example, as a result of eco-taxes) could substantially decrease the economic welfare of countries and destinations. In this article, the interplay of environmental damage and economic gains is thus analysed within the context of tourism. Carbon dioxide-equivalent emissions are assessed in relation to the revenues generated, allowing for conclusions about the eco-efficiency of tourism.

  20. Does resilient mean eco-inefficient?

    DEFF Research Database (Denmark)

    Pizzol, Massimo

    as long-term perfomance. Resilience is not explicitly taken into account within life cycle assessment (LCA). LCA determines the eco-efficiency of product systems, i.e. the ratio between the function provided by the product and its impact on the environment. The question is whether a product system which...... structure is improved or designed to be more resilient will not only be more inefficient, but also eco-inefficient, when studied by means of LCA. In this work a two steps approach is proposed to study resilience of product systems: 1) assessment of disturbance conditions and their inclusion within the scope......, because the redundant connections between elements of a system make it less efficient but also more flexible and adaptable and allow to perform a function even if some connections are interrupted or missing. Balancing between resilience and efficiency seems to be the key for sustainability intended...

  1. [Eco-epidemiology: towards epidemiology of complexity].

    Science.gov (United States)

    Bizouarn, Philippe

    2016-05-01

    In order to solve public health problems posed by the epidemiology of risk factors centered on the individual and neglecting the causal processes linking the risk factors with the health outcomes, Mervyn Susser proposed a multilevel epidemiology called eco-epidemiology, addressing the interdependence of individuals and their connection with molecular, individual, societal, environmental levels of organization participating in the causal disease processes. The aim of this epidemiology is to integrate more than a level of organization in design, analysis and interpretation of health problems. After presenting the main criticisms of risk-factor epidemiology focused on the individual, we will try to show how eco-epidemiology and its development could help to understand the need for a broader and integrative epidemiology, in which studies designed to identify risk factors would be balanced by studies designed to answer other questions equally vital to public health. © 2016 médecine/sciences – Inserm.

  2. ECO-EFFICIENCY INDICATORS’ EVOLUTION IN ROMANIA

    Directory of Open Access Journals (Sweden)

    Camelia CAMASOIU

    2005-06-01

    Full Text Available Due to the importance of improving the environmental performance and of integrating the environmental protection policies in long-term strategies, the practical interest has increased for identifying, selecting and building the most expressive eco-efficiency indicators. The paper analyses the basic performance indicators for environment at micro-economic level, which might show progress on the sustainable development road. The study of the eco-efficiency was developed based on a financing pilot study of urban infrastructure investments in Calarasi county for a municipal association. The main objective was to improve gas and sewerage systems for four localities (Calarasi, Oltenita, Lehliu Gara and Budesti under the conditions of improving the economic and ecological efficiency of the proposed project.

  3. Novel application of bacteriophage for controlling foaming in wastewater treatment plant- an eco-friendly approach

    Science.gov (United States)

    Khairnar, Krishna; Chandekar, Rajshree; Nair, Aparna; Pal, Preeti; Paunikar, Waman N.

    2016-01-01

    ABSTRACT This addendum to “Novel application of bacteriophage for controlling foaming in wastewater treatment plant- an eco-friendly approach “ includes characteristics of the phages NOC1, NOC2 and NOC3 not discussed in the previous paper. The phage adsorption and host interaction properties, their sensitivity to pH and temperature are inferred. NOC2 is seen to be more temperature resistant while others are not. All the phages show pH sensitivity. There is a variance observed in the behavior of these phages. Also, applicability of the phage based system to large scale reactors is studied and discussed here. PMID:26890996

  4. CAD Instructor Designs Eco-Friendly Shed

    Science.gov (United States)

    Schwendau, Mark

    2013-01-01

    Dissatisfied with the options offered by big box stores--and wanting to save some money and go as green as possible--the author puts his design and construction skills to good use. In this article, he shares how he designed and built an eco-friendly shed. He says he is very pleased with the results of working with his own design, reducing waste,…

  5. Dead-end eco-state

    International Nuclear Information System (INIS)

    Schauerhammer, R.

    1990-01-01

    The author comes to the conclusion that, in its present form, the ecology movement is creating a conflict which is alienating man from nature. He investigates the validity of theories about the ozone hole, the greenhouse effect and general pollution. The author also shows that the arguments for environmental conservation favour nuclear technology. The political development of the Green Movement is depicted up to the eco-dictatorship. (DG) [de

  6. Eco efficiency of urban form and transportation

    International Nuclear Information System (INIS)

    Wahlgren, Irmeli

    2007-01-01

    Urban planning and transportation system solutions and decisions have a large-scale significance for eco efficiency, the consumption of energy and other natural resources, the production of greenhouse gas and other emissions, and the costs caused by communities.Planning solutions may impact on greenhouse gas emissions by 10 % at regional level, by 20 % at local community level and even by 200 % at local dwelling area level. Impact on emissions caused by transportation is even bigger: at least double compared to the impact on total emissions. Similarly large impacts can be seen concerning consumption of energy and other natural resources as well as costs.The most important factors in sustainable urban and transportation planning are at dwelling area level: location, structure, building density, house types, space heating systems, at community and regional level: area density, energy consumption and production systems, location of and distances between dwellings, working places and services, transportation systems, possibilities of walking and cycling, availability of public transport, and necessity for use of private cars. The presentation is based on the author's research and case studies from 1992 to 2006. The assessment method EcoBalance was developed to assess sustainability of communities and it has been applied at different planning levels: regional plans, local master plans and detailed plans. The EcoBalance model estimates the total consumption of energy and other natural resources, the production of emissions and wastes and the costs caused directly and indirectly by communities on a life-cycle basis

  7. Eco Logic signs deal to destroy Japanese PCB stocks

    International Nuclear Information System (INIS)

    Anon.

    1997-01-01

    According to a recent announcement, Eco Logic of Rockwood, Ontario, has entered into a partnership with the Japanese companies Tokyo Boeki and Nippon Sharyo for the destruction of stockpiled PCB materials in Japan, using Eco Logic's non-incineration technology. The deal is reported to be worth about $50 million in revenues to Eco Logic, spread over the next few years. The agreement includes provisions for the Japanese companies to purchase, or manufacture under licence, a number of Eco Logic's gas phase chemical reduction processing units to serve the Japanese market. In exchange for exclusive rights to the Japanese market, Eco Logic will receive license fees and royalties of up to nine per cent for the use of its process. Eco Logic is currently building a demonstration unit under contract with the two Japanese companies. The Japanese PCB waste destruction market is estimated to be worth as much as $400 million. Incineration, the conventional form of disposal, is strongly opposed by local governments

  8. EcoMark: Evaluating Models of Vehicular Environmental Impact

    DEFF Research Database (Denmark)

    Guo, Chenjuan; Ma, Mike; Yang, Bin

    2012-01-01

    The reduction of greenhouse gas (GHG) emissions from transporta- tion is essential for achieving politically agreed upon emissions re- duction targets that aim to combat global climate change. So-called eco-routing and eco-driving are able to substantially reduce GHG emissions caused by vehicular...... the vehicle travels in. We develop an evaluation framework, called EcoMark, for such environmental impact models. In addition, we survey all eleven state-of-the-art impact models known to us. To gain insight into the capabilities of the models and to understand the effectiveness of the EcoMark, we apply...

  9. ECOS: sorption, dose, consumption and miscellaneous data values

    International Nuclear Information System (INIS)

    Kane, P.

    1984-10-01

    This report describes the nature of the data stored within the program ECOS, lists the values currently used and references the sources used. Also included are the element-specific equilibrium distribution coefficients (Ksub(D)) which are held in a data file external to ECOS. Nuclide-specific decay constants and dose factors are presented, as are certain plant- and animal-specific data not included in external files. Several miscellaneous items of data stored within ECOS are described. None of the data stored within ECOS are accessible to the user. (author)

  10. Perspective on Eco-Hydrology Developing Strategy in China

    Science.gov (United States)

    Xia, J.

    2017-12-01

    China is one of developing countries with higher eco-environmental press in the world due to large population and its socio-economic development. In China, water is not only the sources for life, but also the key for production, and the foundation for eco-system. Thus, Eco-hydrology becomes a fundamental also an applied sciences related to describe the hydrologic mechanisms that underlie ecologic patterns and processes. This paper addresses the issue of Eco-hydrology Developing Strategy in China, supported by Chinese Academy of Sciences (CAS). Major contents include four aspects, namely: (1) Demands and frontier of eco-hydrology in the world; (2) Major theories and approaches of Eco-hydrology; (3) Perspective of future development on Eco-hydrology; (4) Enacting and proposal for China development strategy on Eco-hydrology. Application fields involves urban, rural area, wetland, river & lake, forest and special regions in China, such as the arid and semi-arid region and so on. The goal is to promote the disciplinary development of eco-hydrology, and serve for national demands on ecological civilization construction in China.

  11. Course Content for Life Cycle Engineering and EcoDesign

    DEFF Research Database (Denmark)

    Jerswiet, Jack; Duflou, Joost; Dewulf, Wim

    2007-01-01

    There is a need to create an awareness of Life Cycle Engineering and EcoDesign in Engineering students. Topics covered in an LCE/EcoDesign course will create an awareness of environmental impacts, especially in other design course projects. This paper suggests that an awareness of product impact...... upon the environment must be created at an early stage in undergraduate education. Deciding what to include in an LCE/EcoDesign Course can be difficult because there are many different views on the subject. However, there are more similarities than differences. All LCE/ EcoDesign Engineering courses...

  12. Experimental characterisation of Polyethylene Terephthalate (PET) bottle Eco-bricks

    International Nuclear Information System (INIS)

    Taaffe, Jonathan; O’Sullivan, Seán; Rahman, Muhammad Ekhlasur; Pakrashi, Vikram

    2014-01-01

    Highlights: • Characterisation of a novel “Eco-brick” by recycling PET bottles and plastic waste. • Eco-bricks have properties for possible uses in construction. • Consistent manufacturing of Eco-bricks demonstrated to be possible. • Weight of Eco-bricks has a nearly linear relationship with mechanical strength. • Light passage and sound reduction potential of Eco-bricks shown to be good. - Abstract: This paper addresses the issue of recycling waste plastic by considering the feasibility of use of Eco-bricks for constructional purposes. The Eco-bricks are formed by packing plastic within Polyethylene Terephthalate (PET) bottles. Guidelines were provided for the construction of Eco-bricks. Experiments were carried out to characterise some of the properties of these bricks. Compression test, sound insulation assessment and light transmission were considered in this regard and compared with traditional construction materials and conditions. Possible applications of Eco-bricks were discussed. The paper presents the first attempt to characterise these bricks and the results encourage future use of them to a significantly wider extent and for various purposes

  13. Organic Foods: Do Eco-Friendly Attitudes Predict Eco-Friendly Behaviors?

    Science.gov (United States)

    Dahm, Molly J.; Samonte, Aurelia V.; Shows, Amy R.

    2009-01-01

    Objective: The purpose of this study was to determine whether student awareness and attitudes about organic foods would predict their behaviors with regard to organic food consumption and other healthy lifestyle practices. A secondary purpose was to determine whether attitudes about similar eco-friendly practices would result in socially conscious…

  14. Chinese eco-cities, an integrated sectoral approach or an eco-cities approach?

    NARCIS (Netherlands)

    M.P. van Dijk (Meine Pieter)

    2012-01-01

    textabstractCities, aware of their environmental challenges, have introduced policies and programs to deal with issues like climate change and pollution. They want to become more ecological which would secure them the label of ‘eco-city’. Policies found in such cases are: closing the water cycle to

  15. Nuclear reactors

    International Nuclear Information System (INIS)

    Barre, Bertrand

    2015-10-01

    After some remarks on the nuclear fuel, on the chain reaction control, on fuel loading and unloading, this article proposes descriptions of the design, principles and operations of different types of nuclear reactors as well as comments on their presence and use in different countries: pressurized water reactors (design of the primary and secondary circuits, volume and chemistry control, backup injection circuits), boiling water reactors, heavy water reactors, graphite and boiling water reactors, graphite-gas reactors, fast breeder reactors, and fourth generation reactors (definition, fast breeding). For these last ones, six concepts are presented: sodium-cooled fast reactor, lead-cooled fast reactor, gas-cooled fast reactor, high temperature gas-cooled reactor, supercritical water-cooled reactor, and molten salt reactor

  16. Some challenges in eco-hydrology

    Science.gov (United States)

    Porporato, A.

    2007-12-01

    The importance of the mutual interactions between biosphere in hydrosphere has become increasingly apparent in both the ecological and hydrological sciences. In hydrology, while the role of plants in controlling soil water balance has been recognized from some time, more subtle controls have also been realized, such as the impact of soil organic matter on soil water dynamics and soil properties, the plant control on infiltration, erosion, and geomorphology. Ecosystem dynamics and land-use changes have also been recognized to impact water availability and quality. On the other hand, biologists and ecologists have increased their attention towards the dynamics of the terrestrial water balance and its impact on plants (photosynthesis, plant growth and reproduction) as well as microbial life (and thus decomposition and the entire cycling of nutrients and carbon fluxes). In this eco-hydrological context, we discuss: (i) the need to distinguish complex from complicated eco- hydrologic behaviors, which are both expected to be present in systems with many degrees of freedom, spatial heterogeneity, nonlinearities and feedbacks (and with biological components). (ii) The use of ideas and tools from complex systems science and non-equilibrium statistical mechanics to explore possible emerging behaviors and patterns. (iii) The importance of intermittency and of the entire spectrum of eco-hydrologic fluctuations conferred by the system nonlinearities, and their connection to a possible theory of biologically- meaningful hydroclimatic extremes. (iv) The need for further research of basic questions yet unanswered (e.g., role of organic matter/roots on soil water balance and soil properties; vegetation control on infiltration; competition for water by plants; role of plant control on uptake (e.g., hydraulic lift)). (v) Ways to merge observations, minimalist models and complex numerical simulations as well as to increase communication of hydrologists with physicists, statisticians

  17. Eco-sustainable routing in optical networks

    DEFF Research Database (Denmark)

    Ricciardi, Sergio; Wang, Jiayuan; Palmieri, Francesco

    2013-01-01

    infrastructures are now widely recognized to play a fundamental role in the emission of green-house gases (GHG) in the at- mosphere, signicantly aecting the environmental sustainability of new evolutions in network architectures as well as technological developments in communication devices. In this paper......, a novel eco-sustainable Routing and Wavelength Assignment (RWA) algorithm, based on shortest-path routing with an adaptive link weighting function relying on an extension of the OSPF-TE protocol to convey carbon footprint information, has been proposed to decrease the network ecological impact while...

  18. Steps towards an integrated eco-economy

    DEFF Research Database (Denmark)

    Kjeldsen, Chris; Christensen, Bo Allesøe

    Twenty years ago, the Danish city Randers still suffered from the effects of an economic restructuring process, which had closed many of the traditional industries of the city. In many ways, the challenge for the city of Randers was to reinvent itself. Today, an overall renaissance of the city is...... in Randers constitutes a case of an integrated rural and urban eco-economy, which transcends established borders between public and private organisations, private and community enterprise and between rural and urban spatial development....

  19. Smart and eco cities in China and India

    NARCIS (Netherlands)

    Höffken, J.I.; Kneitz, A.

    2016-01-01

    The development of smart and eco cities in both China and in India has gained high political attention and momentum on the national policy agendas. Since 2014, China is officially building an “Ecological Civilization” for which eco-cities are believed to be strong pillars. India has announced a

  20. Eco-Visualization: Promoting Environmental Stewardship in the Museum

    Science.gov (United States)

    Holmes, Tiffany

    2007-01-01

    Eco-visualizations are artworks that reinterpret environmental data with custom software to promote stewardship. Eco-visualization technology offers a new way to dynamically picture environmental data and make it meaningful to a museum population. The questions are: How might museums create new projects and programs around place-based information?…

  1. Eco-efficient Agriculture: Concepts, Challenges, and Opportunities

    NARCIS (Netherlands)

    Keating, B.A.; Carberry, P.S.; Bindraban, P.S.; Asseng, S.; Meinke, H.B.; Dixon, J.

    2010-01-01

    Eco-efficiency in the simplest of terms is about achieving more with less—more agricultural outputs, in terms of quantity and quality, for less input of land, water, nutrients, energy, labor, or capital. The concept of eco-efficiency encompasses both the ecological and economic dimensions of

  2. The analysis of ink jet printed eco-font efficiency

    Directory of Open Access Journals (Sweden)

    Rastko Milošević

    2016-07-01

    Full Text Available Utilization of eco-font for office printing is one of sustainable, “green” printing concepts, which besides obvious economic benefits, as a result has a certain effect on environmental sustainability as well. The fundamental problem that this practice faces is decreased quality of text printed using eco-fonts comparing to those printed with regular fonts. The aim of this research is eco-font efficiency estimation, i.e. determination of toner usage reduction level of ink jet printed documents typed with this font type, as well as estimation of the extent humans perceive differences between text printed with eco-font and the one printed by its „non-eco“ equivalent. Combining instrumental measuring method and digital image analysis, it was found that this simple principle (eco-font utilization enables substantial toner usage reduction for an ink jet printing system, while visual test showed that visual experience of text printed using eco-font is sufficient. In addition, awareness of benefits that eco-font utilization brings, change users’ attitude towards eco-font quality.

  3. Constructing Ideologies and Valuing Nature in Two Eco-Cities

    Science.gov (United States)

    Eco-city development is flourishing as the scale and scope of environmental damage becomes increasingly clear. While there are no standard criteria of what constitutes an eco-city, the term has been increasingly applied to a number of different projects that straddle a broad arra...

  4. Preparation, characterization and antibacterial effects of eco-friendly ...

    African Journals Online (AJOL)

    Purpose: To synthesize and characterize eco-friendly gold nanorods (Au-NRs) and to assess their effects against two bacterial strains. Methods: Synthesis of eco-friendly gold nanorods was done from an aqueous solution of chloroauric acid and cetyltrimethylammonium bromide by mixing Olea europaea fruit and Acacia ...

  5. Roll forming of eco-friendly stud

    Science.gov (United States)

    Keum, Y. T.; Lee, S. Y.; Lee, T. H.; Sim, J. K.

    2013-12-01

    In order to manufacture an eco-friendly stud, the sheared pattern is designed by the Taguchi method and expanded by the side rolls. The seven geometrical shape of sheared pattern are considered in the structural and thermal analyses to select the best functional one in terms of the durability and fire resistance of dry wall. For optimizing the size of the sheared pattern chosen, the L9 orthogonal array and smaller-the-better characteristics of the Taguchi method are used. As the roll gap causes forming defects when the upper-and-lower roll type is adopted for expanding the sheared pattern, the side roll type is introduced. The stress and strain distributions obtained by the FEM simulation of roll-forming processes are utilized for the design of expanding process. The expanding process by side rolls shortens the length of expanding process and minimizes the cost of dies. Furthermore, the stud manufactured by expanding the sheared pattern of the web is an eco-friend because of the scrapless roll-forming process. In addition, compared to the conventionally roll-formed stud, the material cost is lessened about 13.6% and the weight is lightened about 15.5%.

  6. Multichannel wireless ECoG array ASIC devices.

    Science.gov (United States)

    DeMichele, Glenn A; Cogan, Stuart F; Troyk, Philip R; Chen, Hongnan; Hu, Zhe

    2014-01-01

    Surgical resection of epileptogenic foci is often a beneficial treatment for patients suffering debilitating seizures arising from intractable epilepsy [1], [2], [3]. Electrodes placed subdurally on the surface of the brain in the form of an ECoG array is one of the multiple methods for localizing epileptogenic zones for the purpose of defining the region for surgical resection. Currently, transcutaneous wires from ECoG grids limit the duration of time that implanted grids can be used for diagnosis. A wireless ECoG recording and stimulation system may be a solution to extend the diagnostic period. To avoid the transcutaneous connections, a 64-channel wireless silicon recording/stimulating ASIC was developed as the electronic component of a wireless ECoG array that uses SIROF electrodes on a polyimide substrate[4]. Here we describe two new ASIC devices that have been developed and tested as part of the on-going wireless ECoG system design.

  7. Understanding Eco-innovation and Green Business Models

    DEFF Research Database (Denmark)

    Andersen, Maj Munch

    2014-01-01

    Eco-innovation is considered a still more important competitive strategy to maintain production in highcost economies such as the Danish one. Within the studies of economics of technological change only little research has been undertaken on the dynamics of eco-innovation. Rigorous statistics...... technologies which has taken a starting pointin the environmental effects of varies technologies. The seven categories are:1. Curative eco-innovations - add-on (clean-up, recycling and resource handling)2. Integrated continuous process and product eco-innovations (cleaner production and products)3. User...... and definitions of ecoinnovationare lacking leading to much confusion and methodologically weak empirical analyses. This paperseeks to remedy this by offering a definition and taxonomy of eco-innovations and discussing theimplications for green business model thinking, bringing in examples of Danish successful...

  8. Eco-Innovation in Circular Agri-Business

    Directory of Open Access Journals (Sweden)

    Dong-Her Shih

    2018-04-01

    Full Text Available This study constructs a theory of eco-innovation in circular agri-business. Although previous studies have discussed eco-innovation in circular agri-business, they did not address eco-innovation from the perspective of a closed-loop sustainable supply chain. Hence, this study applied the fuzzy TOPSIS method to conduct the analysis and determine the interrelationship between eco-innovation and the closed-loop concept. The results are consistent with the theory and a significant improvement in terms of the decisive attributes. The findings suggest that improving water management, relationships with suppliers, knowledge sharing, environmental management systems, and new product and service development are the most effective and efficient ways to build eco-innovation in circular agri-business. The managerial and theoretical implications are discussed.

  9. Eco-modernism, a third way for tomorrow's energy?

    International Nuclear Information System (INIS)

    Anon.

    2017-01-01

    Considering climate warming as an immediate threat for humanity, ecologists from the Eco-modernism movement not only approve but call for the presence of nuclear power in the energy mix. For them nuclear energy is a mature low-carbon energy that can be used to combine all renewable energies more efficiently. NGO like 'Environmental Progress', 'Energy for Humanity' or 'Save the Nukes' back the Eco-modernism movement. The Eco-modernism movement gathers unconventional ecologists who consider that modern technologies by using the eco-system more efficiently than previous technologies did, are a powerful tool to reduce the global impact of humane activities on the biosphere. The Eco-modernism movement is for agricultural intensification, the use of GMO, waste recycling and for increasing urbanization. (A.C.)

  10. The Economic Value of Corporate Eco-Efficiency

    International Nuclear Information System (INIS)

    Guenster, N.; Derwall, J.; Bauer, R.; Koedijk, K.

    2006-08-01

    This study adds new insights to the long-running corporate environmental-financial performance debate by focusing on the concept of eco-efficiency. Using a new database of eco-efficiency ratings, we analyze the relation between eco-efficiency and financial performance from 1997 to 2004. We report that eco-efficiency relates positively to operating performance and market value. Moreover, our results suggest that the market's valuation of environmental performance has been time variant, which may indicate that the market incorporates environmental information with a drift. Although environmental leaders initially did not sell at a premium relative to laggards, the valuation differential increased significantly over time. Our results have implications for company managers, who evidently do not have to overcome a tradeoff between eco-efficiency and financial performance, and for investors, who can exploit environmental information for investment decisions

  11. Eco-innovations in the functioning of companies.

    Science.gov (United States)

    Ociepa-Kubicka, A; Pachura, P

    2017-07-01

    The development of entrepreneurships in the 21st century cannot occur without taking care of the natural environment. The article presents issues related to eco-innovation. Despite the opportunities offered by eco-innovations, implementation of such initiatives remains to lead to various difficulties. They vary across countries and sectors. The insufficient number of enterprises in Poland and other European countries implement adequate level of eco-innovations. The main aim of this paper is to indicate the causes of this status and activities aimed to develop eco-innovativeness. The benefits and risks connected with implementation of innovative products and technologies were also discussed. Furthermore, the advantages of and barriers to their implementation into companies were analysed. The entrepreneurs from the least eco-innovative countries emphasize serious barriers, including uncertain demand from the market, uncertain return on investment or too long a payback period for eco-innovation, lack of funds within the enterprise, insufficient access to existing subsidies and fiscal incentive. They are especially afraid of the financial risks, which raises uncertainty and leads to refraining from innovative initiatives. The possibilities were indicated for the entrepreneurs who face problems with the implementation of innovative solutions. Particular attention was paid to the European Union activities for the development of eco-innovations. Numerous programs supporting their implementation were indicated. The article also presents examples of eco-innovation in water and sewage enterprises. It was emphasized that planning of eco-innovative solutions should be based on comprehensive information about actual benefits and possibility of threats to the environment which can be caused by implementation of eco-innovations. The study presents the example of threats resulting from different methods of sewage sludge management. Copyright © 2017 Elsevier Inc. All rights

  12. From an eco-industrial park towards an eco-city : a case study in Suzhou, China

    NARCIS (Netherlands)

    Yu, Chang; Dijkema, Gerard P. J.; de Jong, Martin; Shi, Han

    2015-01-01

    As eco-industrial park policies have been in place for years, many mature eco-industrial parks tend to acquire more than just industrial functions and become new urban districts. We investigated this development and conducted empirical research in Suzhou Industrial Park, to obtain insight in how a

  13. H Reactor

    Data.gov (United States)

    Federal Laboratory Consortium — The H Reactor was the first reactor to be built at Hanford after World War II.It became operational in October of 1949, and represented the fourth nuclear reactor on...

  14. The Role of Interaction Patterns with Hybrid Electric Vehicle Eco-Features for Drivers' Eco-Driving Performance.

    Science.gov (United States)

    Arend, Matthias G; Franke, Thomas

    2017-03-01

    The objective of the present research was to understand drivers' interaction patterns with hybrid electric vehicles' (HEV) eco-features (electric propulsion, regenerative braking, neutral mode) and their relationship to fuel efficiency and driver characteristics (technical system knowledge, eco-driving motivation). Eco-driving (driving behaviors performed to achieve higher fuel efficiency) has the potential to reduce CO 2 emissions caused by road vehicles. Eco-driving in HEVs is particularly challenging due to the systems' dynamic energy flows. As a result, drivers are likely to show diverse eco-driving behaviors, depending on factors like knowledge and motivation. The eco-features represent an interface for the control of the systems' energy flows. A sample of 121 HEV drivers who had constantly logged their fuel consumption prior to the study participated in an online questionnaire. Drivers' interaction patterns with the eco-features were related to fuel efficiency. A common factor was identified in an exploratory factor analysis, characterizing the intensity of actively dealing with electric energy, which was also related to fuel efficiency. Driver characteristics were not related to this factor, yet they were significant predictors of fuel efficiency. From the perspective of user-energy interaction, the relationship of the aggregated factor to fuel efficiency emphasizes the central role of drivers' perception of and interaction with energy conversions in determining HEV eco-driving success. To arrive at an in-depth understanding of drivers' eco-driving behaviors that can guide interface design, authors of future research should be concerned with the psychological processes that underlie drivers' interaction patterns with eco-features.

  15. [Applications of eco-environmental big data: Progress and prospect].

    Science.gov (United States)

    Zhao, Miao Miao; Zhao, Shi Cheng; Zhang, Li Yun; Zhao, Fen; Shao, Rui; Liu, Li Xiang; Zhao, Hai Feng; Xu, Ming

    2017-05-18

    With the advance of internet and wireless communication technology, the fields of ecology and environment have entered a new digital era with the amount of data growing explosively and big data technologies attracting more and more attention. The eco-environmental big data is based airborne and space-/land-based observations of ecological and environmental factors and its ultimate goal is to integrate multi-source and multi-scale data for information mining by taking advantages of cloud computation, artificial intelligence, and modeling technologies. In comparison with other fields, the eco-environmental big data has its own characteristics, such as diverse data formats and sources, data collected with various protocols and standards, and serving different clients and organizations with special requirements. Big data technology has been applied worldwide in ecological and environmental fields including global climate prediction, ecological network observation and modeling, and regional air pollution control. The development of eco-environmental big data in China is facing many problems, such as data sharing issues, outdated monitoring facilities and techno-logies, and insufficient data mining capacity. Despite all this, big data technology is critical to solving eco-environmental problems, improving prediction and warning accuracy on eco-environmental catastrophes, and boosting scientific research in the field in China. We expected that the eco-environmental big data would contribute significantly to policy making and environmental services and management, and thus the sustainable development and eco-civilization construction in China in the coming decades.

  16. Eco-Labeled Seafood: Determinants for (Blue Green Consumption

    Directory of Open Access Journals (Sweden)

    Malin Jonell

    2016-09-01

    Full Text Available Eco-certification has become an increasingly popular market-based tool in the endeavor to reduce negative environmental impacts from fisheries and aquaculture. In this study, we aimed at investigating which psychological consumer characteristics influence demand for eco-labeled seafood by correlating consumers’ stated purchasing of eco-labeled seafood to nine variables: environmental knowledge regarding seafood production, familiarity with eco-labels, subjective knowledge, pro-environmental self-identification, sense of personal responsibility, concern for negative environmental impacts from seafood production, perceived consumer effectiveness, gender and education. Questionnaires were distributed to consumers in Stockholm, Sweden, and the data were tested with multiple regression analysis using linear modeling and model averaging (n = 371. Two variables were the best predictors of stated purchasing of eco-labeled seafood: (i recognition and understanding of eco-labels for seafood (Marine Stewardship Council, Fish for Life, Aquaculture Stewardship Council and KRAV; and (ii concern for negative environmental impacts associated with seafood production. Meanwhile, consumer environmental knowledge was a weaker predictor. Results from this study suggest that strengthening the emotional component of consumer decision-making and improving the level of consumer familiarity with seafood eco-labels could stimulate more pro-environmental seafood consumption.

  17. The Eco-Efficiency Premium Puzzle

    International Nuclear Information System (INIS)

    Guenster, N.; Derwall, J.; Bauer, R.; Koedijk, K.

    2004-09-01

    Conventional investment theory suggests that socially responsible investing (SRI) leads to inferior, rather than superior, portfolio performance. Using Innovest's well-established corporate eco-efficiency scores, we provide evidence supporting the contrary. We compose two equity portfolios that differ in ecoefficiency characteristics and find that our high-ranked portfolio provided substantially higher average returns compared to its low-ranked counterpart over the period 1995-2003. Using a wide range of performance attribution techniques to address common methodological concerns, we show that this performance differential cannot be explained by differences in market sensitivity, investment style, or industry-specific components. We finally investigate whether this ecoefficiency premium puzzle withstands the inclusion of transaction costs scenarios, and evaluate how excess returns can be earned in a practical setting via a best-in-class stock selection strategy. The results remain significant under all levels of transactions costs, thus suggesting that the incremental benefits of SRI can be substantial

  18. Evaluating Eco-Innovation of OECD Countries with Data Envelopment Analysis

    Science.gov (United States)

    Mavi, Reza Kiani; Standing, Craig

    2016-01-01

    Government regulations require businesses to improve their processes and products/services in a green and sustainable manner. For being environmentally friendly, businesses should invest more on eco-innovation practices. Firms eco-innovate to promote eco-efficiency and sustainability. This paper evaluates the eco-innovation performance of…

  19. Eco-efficiency of grinding processes and systems

    CERN Document Server

    Winter, Marius

    2016-01-01

    This research monograph aims at presenting an integrated assessment approach to describe, model, evaluate and improve the eco-efficiency of existing and new grinding processes and systems. Various combinations of grinding process parameters and system configurations can be evaluated based on the eco-efficiency. The book presents the novel concept of empirical and physical modeling of technological, economic and environmental impact indicators. This includes the integrated evaluation of different grinding process and system scenarios. The book is a valuable read for research experts and practitioners in the field of eco-efficiency of manufacturing processes but the book may also be beneficial for graduate students.

  20. Psychological predictors of eco-driving: A longitudinal study

    OpenAIRE

    Lauper Elisabeth; Moser Stephanie; Fischer Maja; Matthies Ellen; Kaufmann-Hayoz Ruth

    2015-01-01

    Eco-driving has well-known positive effects on fuel economy and greenhouse-gas emissions. Moreover, eco-driving reduces road-traffic noise, which is a serious threat to the health and well-being of many people. We investigated the psychological predictors of the adoption of eco-driving from the perspective of road-traffic noise abatement. The data came from 890 car drivers who participated in a longitudinal survey over four months. Specifically, we tested the effects of the intention to preve...

  1. Eco-innovation: The opportunities for engineering design research

    DEFF Research Database (Denmark)

    O'Hare, Jamie Alexander; McAloone, Tim C.

    2014-01-01

    Eco-innovation is an approach that has the potential to deliver step change improvements in the environmental performance of products, but the uptake by industry to date has been disappointing. The paper presents a selective review of the academic literature, choosing examples of research that gi...... a flavour of the key trends and interesting topics that are emerging from the eco-innovation body of knowledge. We conclude by suggesting 10 areas where we see potential for the engineering design research community to contribute to the advancement of eco-innovation.......Eco-innovation is an approach that has the potential to deliver step change improvements in the environmental performance of products, but the uptake by industry to date has been disappointing. The paper presents a selective review of the academic literature, choosing examples of research that give...

  2. Eco-industrial initiatives in Asia : issues and opportunities

    Energy Technology Data Exchange (ETDEWEB)

    Chiu, A.S.F. [Industrial Ecology Asia Network, (China)

    2002-07-01

    This Power Point presentation discusses the impact of industry urban-suburban relocation. This relocation to industrial zones is on the rise in Asia, where there are now approximately 4,000 industrial estates, resulting from export-oriented businesses, cluster-based activities and collective management systems. Eco-industrial parks are zones that promote sustainable development through the combined benefits of environmental, social and economic initiatives. Eco-industrial parks enact environmental management laws and initiate eco-industrial development projects. Asia is diverse in access to natural resources, economics, politics, and level of development and access to natural resources. The paper describes how eco-business and a recycling-oriented economic society is being adopted in countries in Asia including China, Japan, Thailand, Philippines, Indonesia, Malaysia, Vietnam and India. tabs., figs.

  3. EPA EcoBox Tools by Exposure Pathways

    Science.gov (United States)

    Eco-Box is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases

  4. EPA EcoBox Tools by Exposure Pathways - Air

    Science.gov (United States)

    Eco-Box is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases

  5. EPA EcoBox Tools by Exposure Pathways - Soil

    Science.gov (United States)

    Eco-Box is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases

  6. Eco-tourism potential along the Indian coasts

    Digital Repository Service at National Institute of Oceanography (India)

    Untawale, A.G.; Dhargalkar, V.K.

    in India for creating awareness in education, research, conservation, sustainable utilization and management of flora and fauna. India has several biosphere reserves, marine parks and sanctuaries having different eco-biological components and uniqueness...

  7. Eco-logical grant recipient peer exchange report

    Science.gov (United States)

    2012-05-15

    On March 21-22, 2012, the Federal Highway Administration (FHWA) Office of Project Development and Environmental Review sponsored a two-day peer exchange to convene recipients of FHWA Eco-Logical grants whose projects achieved noteworthy accomplishmen...

  8. Business sustainability performance measurement: Eco-ratio analysis

    Directory of Open Access Journals (Sweden)

    Collins C. Ngwakwe

    2016-12-01

    Full Text Available Eco-aware customers and stakeholders are demanding for a measurement that links environmental performance with other business operations. To bridge this seemingly measurement gap, this paper suggests ‘Eco-Ratio Analysis’ and proposes an approach for conducting eco-ratio analysis. It is argued that since accounting ratios function as a tool for evaluating corporate financial viability by management and investors, eco-ratio analysis should be brought to the fore to provide a succinct measurement about the linkage between environmental performance and conventional business performance. It is hoped that this suggestion will usher in a nuance debate and approach in the teaching, research and practice of environmental management and sustainability accounting

  9. EPA EcoBox Tools by Stressors - Chemical

    Science.gov (United States)

    Eco-Box is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases

  10. EPA EcoBox Tools by Stressors - Physical

    Science.gov (United States)

    Eco-Box is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases

  11. EPA EcoBox Tools by Stressors - Stressors in ERA

    Science.gov (United States)

    Eco-Box is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases

  12. EPA EcoBox Tools by Stressors - Biological

    Science.gov (United States)

    Eco-Box is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases

  13. ECO-TECHNIQUE OF SEWER RENOVATION USING COMPOSITE ...

    African Journals Online (AJOL)

    2011-12-31

    Dec 31, 2011 ... An eco-technical renovation of the sewage system is developed in this paper; this ... structural analysis of a typical shell unit with an ovoid form .... described by five fundamental equations, can be reduced to three equations.

  14. The Application Potential of Eco-Efficiency for Greening Company

    Science.gov (United States)

    Prasaja, Lukman Eka; Hadiyanto

    2018-02-01

    Eco-Efficiency emerged in the 1990s as a measure of "the efficiency that ecological sources use to meet human needs." As a tool in economic and environmental integration, Eco-efficiency needs to be promoted further so that regulation in government and industrial management can include it as an important instrument. This paper provides several approaches that can help various industries to develop effective eco-efficiency principles. The approach used is to maximize the role of the Steering Committee of the company's internal environment. Utilization of natural resources such as water, forests, mines and energy needs need to be balanced with Eco-Efficiency so that natural exploitation can be well controlled so that sustainable development aspired by the world can be realized.

  15. ECO-INDUSTRIAL PARK - A TOOL FOR SUSTAINABLE DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    BUGNAR NICOLETA GEORGETA

    2013-07-01

    Full Text Available Local communities embracing the concept of Eco-industrial park are looking for some additional benefits for all the interested parties – both public and private: higher economic efficiency, the increase of competitivity by applying last minute technologies, generation of additional revenues through positive regulations at the community level, the creation of jobs, solving the conflict between economy and environment, diminishing the demand on the county infrastructure, decreasing the effects of pollution, using energy from regenerating sources and replacement materials. Communities and enterprises creating Eco-industrial parks will have common grounds for industrial development, which is much more competitive, more efficient and much cleaner than traditional industrial parks. Moreover, the new business niches will be open to recruitment or new incubators. Eco-industrial parks represent a special category compared to industrial parks, a category which is different from the classical ones due to the fact that they are designed in such a way so that they promote the collaboration between companies in order to reuse recyclable materials and green energy sources. A long-term vision must reflect the focus on the creation of collaboration networks between firms and the fact that an Eco-industrial park should be a business community, not only a mathematical sum of companies located in the same geographical area. The quality, continuity and interconnection of economic flows within the firms of an Eco-industrial park are important characteristics for the success of Eco-industrial networks. The following discussion tackles the way in which an Eco-industrial park is set-up: creating and implementing an Eco-industrial park in accordance with the principles of circular economy or transforming an already existing industrial park into an Eco- industrial park. The quality, the continuity, the number of interconnected firms, the flows of resources and the

  16. Exploring Challenges and Opportunities for Eco-Feedback Technology

    DEFF Research Database (Denmark)

    Verdezoto, Nervo

    This position paper explores challenges and opportunities for eco-feedback technology. Drawing on two design cases, I discuss the importance of supporting active participation as well as the articulation of work in everyday practices to facilitate reduction of consumption.......This position paper explores challenges and opportunities for eco-feedback technology. Drawing on two design cases, I discuss the importance of supporting active participation as well as the articulation of work in everyday practices to facilitate reduction of consumption....

  17. Development and Eco-Efficiency in the Information Society

    OpenAIRE

    Cristina Balaceanu; Diana Apostol

    2012-01-01

    I / dematerialization of economies is probably the main characteristic of the IST (Information Society Technology). We explore in this text the benefits of i / dematerialization in the terms of eco-efficiency and / or sustainable development. If the main contribution of IST / ICT (Information and Communication Technology) is demonstrated by the efforts of the economies to increase their intangible capital stocks and to restructure, i / dematerialization is not inherently eco-efficient and / o...

  18. Revisiting eco-ethics and econ-ethics

    Directory of Open Access Journals (Sweden)

    Otto Kinne

    2002-11-01

    Full Text Available Modern humanity can survive only if traditional ethics are extended to include eco-ethics and econ-ethics. Success or failure in developing and implementing these new ethical constructs will affect the fate of our species Homo sapiens and that of millions of other forms of life. In the long run failure to accept and apply eco-ethics and econ-ethics would reduce the capacities of Planet Earth to support life.

  19. Proposal for the Evaluation of Eco-Efficient Concrete

    Directory of Open Access Journals (Sweden)

    Taehyoung Kim

    2016-07-01

    Full Text Available The importance of environmental consequences due to diverse substances that are emitted during the production of concrete is recognized, but environmental performance tends to be evaluated separately from the economic performance and durability performance of concrete. In order to evaluate concrete from the perspective of sustainable development, evaluation technologies are required for comprehensive assessment of environmental performance, economic performance, and durability performance based on a concept of sustainable development called the triple bottom line (TBL. Herein, an assessment method for concrete eco-efficiency is developed as a technique to ensure the manufacture of highly durable and eco-friendly concrete, while minimizing both the load on the ecological environment and manufacturing costs. The assessment method is based on environmental impact, manufacturing costs, and the service life of concrete. According to our findings, eco-efficiency increased as the compressive strength of concrete increased from 21 MPa to 40 MPa. The eco-efficiency of 40 MPa concrete was about 50% higher than the eco-efficiency of 24 MPa concrete. Thus eco-efficiency is found to increase with an increasing compressive strength of concrete because the rate of increase in the service life of concrete is larger than the rate of increase in the costs. In addition, eco-efficiency (KRW/year was shown to increase for all concrete strengths as mixing rates of admixtures (Ground Granulated Blast furnace Slag increased to 30% during concrete mix design. However, when the mixing rate of admixtures increased to 40% and 60%, the eco-efficiency dropped due to rapid reduction in the service life values of concrete to 74 (year/m3 and 44 (year/m3, respectively.

  20. Eco-audit as basis for an integral environment management

    International Nuclear Information System (INIS)

    Sepp, H.M.

    1994-01-01

    The author explains in a summary the possibility of utilizing the Eco-Audit as enterprise-oriented analysis of its strengths and weaknesses of the ecologically oriented factors, as well as its tendency to standardization by the European Union. Furthermore, he deals with the execution of an Eco-Audit in phases and its manifold utilization potentials for the investigated operation, which - when utilized consequently - can be seen in the realization of an integral ecologically oriented management. (orig.) [de

  1. [Research advances in eco-toxicological diagnosis of soil pollution].

    Science.gov (United States)

    Liu, Feng; Teng, Hong-Hui; Ren, Bai-Xiang; Shi, Shu-Yun

    2014-09-01

    Soil eco-toxicology provides a theoretical basis for ecological risk assessment of contaminated soils and soil pollution control. Research on eco-toxicological effects and molecular mechanisms of toxic substances in soil environment is the central content of the soil eco-toxicology. Eco-toxicological diagnosis not only gathers all the information of soil pollution, but also provides the overall toxic effects of soil. Therefore, research on the eco-toxicological diagnosis of soil pollution has important theoretical and practical significance. Based on the research of eco-toxicological diagnosis of soil pollution, this paper introduced some common toxicological methods and indicators, with the advantages and disadvantages of various methods discussed. However, conventional biomarkers can only indicate the class of stress, but fail to explain the molecular mechanism of damage or response happened. Biomarkers and molecular diagnostic techniques, which are used to evaluate toxicity of contaminated soil, can explore deeply detoxification mechanisms of organisms under exogenous stress. In this paper, these biomarkers and techniques were introduced systematically, and the future research trends were prospected.

  2. Application of eco-economy regionalization in western China

    Science.gov (United States)

    Zhang, Xiaojun; Dong, Suocheng; Weihong, Yin

    2008-08-01

    Ecological economics crossed extensively with some disciplines such as ecology, geography, economics, etc in China. And it is promoting the relevant disciplines to develop effectively in depth fields. The key research direction of eco-economic regionalizing is eco-economic space pattern, rule of territorial differentiation and eco-economic topological optimization. Based on GIS spatial analyze, the article elaborates the main characteristics and the problems of every eco-economic zones, districts and regions with the comprehensive geographical statistic data. The western eco-economic regionalizing was delimited by analyzing the superposition for ecological environment value and human actives value, refer to the topography and administrative boundary between provinces and the cities, the attachment of the regionalizing plans and territorial the continuity. There have several main indexes used in the regionalizing and the results to show the main character of each region, which comprise precipitation, temperature, primary production potential, while the population carrying capacity, and the index of water resources, land resources, landscape degradation, urbanization, and economic development, etc. To each type of eco-economic region, there are other analyzes respectively from the social, economic, and natural environment aspects. The result shows that there does now have serious economic development in western China, while the environmental problem still cannot be ignored.

  3. Eco-Efficiency Actions and Firm Growth in European SMEs

    Directory of Open Access Journals (Sweden)

    Elisenda Jové-Llopis

    2018-01-01

    Full Text Available This study investigates the effects of eco-efficiency actions on firm performance in terms of sales growth in an extensive sample of 11,336 small- and medium-sized enterprises (SMEs located in 28 European countries. Our empirical results suggest that not all eco-strategies are positively related to better performance, at least not in the short term. We found that European companies using renewable energies, and recycling or designing products that are easier to maintain, repair, or reuse, perform better. Those that aim to reduce water or energy pollution, however, seemed to show a negative correlation to firm growth. Our results also indicate that high investment in eco-strategies improves firm growth, particularly in new members that joined the EU from 2004 onwards. Finally, we observed a U-shaped relationship between eco-strategies and firm growth, which indicates that a greater breadth of eco-strategies is associated with better firm performance. However, few European SMEs are able to either invest heavily or undertake multiple eco-strategies, thus leaving room for policy interventions.

  4. Roles of Eco-labeling in Fisheries Conservation and Sustainability

    Directory of Open Access Journals (Sweden)

    Olaniyi Alaba Olopade

    2017-06-01

    Full Text Available An important goal of fisheries management is to ensure that fish stocks are harvested at sustainable levels of fishing pressure. However, the classical maximum sustainable yield theory and its derivatives have not worked for fisheries management. A number of mitigating measures have been suggested of which eco -labeling is one. An ecolabel on a fish product is a distinctive mark or statement indicating that it has been harvested in compliance with preset sustainability standards. This paper examines eco labeling in fisheries as the new strategy to achieve fisheries conservation and sustainability. It emphasizes the importance of fish as critical food resources and new approach to fisheries management through the use of certification programs. It considers the benefits and problems that may accrue from eco-certification of fish harvesting and trade practices in fisheries. This paper, attention is focused on examining the likely option for development of eco-labeling scheme in Nigeria. The paper concludes that the increase awareness amongst stakeholders of the potential role of eco-labeling in conservation and sustainability tools should be established.   Keywords: Fisheries management, fish, conservation, eco-certification

  5. Reactor Physics

    International Nuclear Information System (INIS)

    Ait Abderrahim, A.

    2002-01-01

    SCK-CEN's Reactor Physics and MYRRHA Department offers expertise in various areas of reactor physics, in particular in neutron and gamma calculations, reactor dosimetry, reactor operation and control, reactor code benchmarking and reactor safety calculations. This expertise is applied in the Department's own research projects in the VENUS critical facility, in the BR1 reactor and in the MYRRHA project (this project aims at designing a prototype Accelerator Driven System). Available expertise is also used in programmes external to the Department such as the reactor pressure steel vessel programme, the BR2 materials testing reactor dosimetry, and the preparation and interpretation of irradiation experiments by means of neutron and gamma calculations. The activities of the Fuzzy Logic and Intelligent Technologies in Nuclear Science programme cover several domains outside the department. Progress and achievements in these topical areas in 2001 are summarised

  6. Reactor Physics

    Energy Technology Data Exchange (ETDEWEB)

    Ait Abderrahim, A

    2001-04-01

    The Reactor Physics and MYRRHA Department of SCK-CEN offers expertise in various areas of reactor physics, in particular in neutronics calculations, reactor dosimetry, reactor operation, reactor safety and control and non-destructive analysis of reactor fuel. This expertise is applied in the Department's own research projects in the VENUS critical facility, in the BR1 reactor and in the MYRRHA project (this project aims at designing a prototype Accelerator Driven System). Available expertise is also used in programmes external to the Department such as the reactor pressure steel vessel programme, the BR2 reactor dosimetry, and the preparation and interpretation of irradiation experiments by means of neutron and gamma calculations. The activities of the Fuzzy Logic and Intelligent Technologies in Nuclear Science programme cover several domains outside the department. Progress and achievements in these topical areas in 2000 are summarised.

  7. Reactor Physics

    Energy Technology Data Exchange (ETDEWEB)

    Ait Abderrahim, A

    2002-04-01

    SCK-CEN's Reactor Physics and MYRRHA Department offers expertise in various areas of reactor physics, in particular in neutron and gamma calculations, reactor dosimetry, reactor operation and control, reactor code benchmarking and reactor safety calculations. This expertise is applied in the Department's own research projects in the VENUS critical facility, in the BR1 reactor and in the MYRRHA project (this project aims at designing a prototype Accelerator Driven System). Available expertise is also used in programmes external to the Department such as the reactor pressure steel vessel programme, the BR2 materials testing reactor dosimetry, and the preparation and interpretation of irradiation experiments by means of neutron and gamma calculations. The activities of the Fuzzy Logic and Intelligent Technologies in Nuclear Science programme cover several domains outside the department. Progress and achievements in these topical areas in 2001 are summarised.

  8. Reactor Physics

    International Nuclear Information System (INIS)

    Ait Abderrahim, A.

    2001-01-01

    The Reactor Physics and MYRRHA Department of SCK-CEN offers expertise in various areas of reactor physics, in particular in neutronics calculations, reactor dosimetry, reactor operation, reactor safety and control and non-destructive analysis of reactor fuel. This expertise is applied in the Department's own research projects in the VENUS critical facility, in the BR1 reactor and in the MYRRHA project (this project aims at designing a prototype Accelerator Driven System). Available expertise is also used in programmes external to the Department such as the reactor pressure steel vessel programme, the BR2 reactor dosimetry, and the preparation and interpretation of irradiation experiments by means of neutron and gamma calculations. The activities of the Fuzzy Logic and Intelligent Technologies in Nuclear Science programme cover several domains outside the department. Progress and achievements in these topical areas in 2000 are summarised

  9. ECO-DRIVING Europe - building the frame for a European market for eco-driving

    International Nuclear Information System (INIS)

    Raimund, Willy; Fickl, Stephan

    2003-01-01

    Due to rapidly increasing greenhouse gas emissions, the transport sector is a key issue in any sustainability and climate strategy. Still, it is the one most difficult to deal with because of it's complexity and direct impact on everybody's life. Innovative transport technologies can significantly contribute to reducing emissions and energy use, but there is also a need for behavioural changes to turn down energy demand, especially in individual motorised transport. One of the most cost-effective measures in this field is Ecodriving, an energy efficient and road safety improving driving style. Nowadays, there are several stand-alone initiatives in Europe. But to strengthen Ecodriving and increase its market share it needs: - an overview of existing offers and facilities, - pilot projects with different target groups, - training courses (both for novice drivers and experienced road users), - quality standards, - scientific proof of the various benefits, - awareness raising and marketing. That's why ECO-DRIVING Europe has been initiated by the main stakeholders in Europe. It aims to change the behaviour of drivers by using technological developments, influencing legislation and supporting long term driving and mobility culture change. The Europe-wide ECO-DRIVING project (www.ecodrive.org ) tries to reach this goal by integrating Ecodriving into various policy fields such as energy, climate change, road safety, local environment, sustainable transport and legislation for driver licence procedures. By decreasing greenhouse gas emission by 10-20% compared to normal driving, Ecodriving can considerably contribute to reduce energy demand in transport and fight climate change. Keywords ECO-DRIVING, sustainable transport, energy efficiency, behavioural change, market penetration, environmental and economic benefits, road safety

  10. On eco-planning for an eco-demonstration park (EDP) and sustainability-Case study of the Luhua EDP in the Chongming Island of Shanghai,China

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The background,concept,connotation,principles,and methods ofeco-planning for an Eco-Demonstration Park (EDP) and sustainability were examined based on a case study of the Luhua EDP in the Chongming Island of Shanghai,China,which is an important part of Shanghai Eco-city planning and construction in the 21st century.By analyzing natural,social and economic conditions,calculating population using the land capacity eco-model,eco-function zoning,and eco-construction,an innovative eco-industrial structure and technical chain were formulated.A comprehensive eco-planning scheme for the EDP was proposed,including planning and management strategies for subsystems of efficient industry,good quality human settlement,high standard eco-construction and eco-tourism as well as effective environmental protection and attractive landscape.The EDP should be an area with coordinated and sustainable economic,social and environmental subsystems.Eco-planning for the EDP should be a very important part of eco-city planning and sustainability.The paper aims to set up a theoretical framework and practical basis for eco-planning and promoting harmony between human and nature.

  11. Reactor operation

    CERN Document Server

    Shaw, J

    2013-01-01

    Reactor Operation covers the theoretical aspects and design information of nuclear reactors. This book is composed of nine chapters that also consider their control, calibration, and experimentation.The opening chapters present the general problems of reactor operation and the principles of reactor control and operation. The succeeding chapters deal with the instrumentation, start-up, pre-commissioning, and physical experiments of nuclear reactors. The remaining chapters are devoted to the control rod calibrations and temperature coefficient measurements in the reactor. These chapters also exp

  12. Reactor safeguards

    CERN Document Server

    Russell, Charles R

    1962-01-01

    Reactor Safeguards provides information for all who are interested in the subject of reactor safeguards. Much of the material is descriptive although some sections are written for the engineer or physicist directly concerned with hazards analysis or site selection problems. The book opens with an introductory chapter on radiation hazards, the construction of nuclear reactors, safety issues, and the operation of nuclear reactors. This is followed by separate chapters that discuss radioactive materials, reactor kinetics, control and safety systems, containment, safety features for water reactor

  13. ECO2, Emissions Trading Services, development project

    International Nuclear Information System (INIS)

    Ruokonen, A.

    2006-01-01

    Emissions Trading started within EU at the beginning of 2005. It caused substantial changes to the business environment of energy companies and energy intensive industry. The planning of Emissions Trading is a complicated process and companies will need consulting, IT systems and other services. Emissions Trading introduces a new factor of production emission allowances, which are tradable commodities. In future, Emissions Trading emissions, emission allowances and the prices of emission allowances have to be considered during the fuel purchasing and the energy production planning. And the best possible knowledge of the own emissions balance and market situation has a monetary value when trading emission allowances. Allocation of emission allowances has done in each country according to National Allocation Plan (NAP), accepted by EU. Finland itself and thus also the Finnish companies will be net buyers of emission allowances in long run. That means commonly that the Finnish companies have to buy more allowances meaning some extra costs to the companies. That's why it is very important to develop and provide to the companies an innovatory emissions planning, follow-up, management and reporting systems. With good emission balance management the extra costs of Emissions Trading will be as low as possible. In ECO2 project, Empower together with Power-Deriva, developed Expert services, Emissions Balance Management and Reporting services and Risk Management services for Emissions Trading and needed software and tools for these services. (orig.)

  14. SUSTAINABLE DEVELOPMENT THROUGH ECO-ECONOMIC DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Vergina CHIRITESCU

    2013-12-01

    Full Text Available The issue of the relationship between humankind and the environment became scientific and economic concerns of the international community since the first UN Conference on the Human Environment (Stockholm, 1972 and resulted in the work of the World Commission on Environment and Development, established in 1985. Report of the Commission presented in 1987 by GH Brundtland, entitled "Our Common Future" provided the first universally accepted definition of sustainable development as "development that meets the needs of the present generation without compromising the opportunities of future generations to meet their own needs". Brundtland Report, 1987, was reaffirmed by the United Nations Conference on Environment and Development / Earth Summit held in Rio de Janeiro - Brazil, 1992 which established the principles of Agenda 21, which was intended to be a guide implementation of sustainable development for the 21st century, a development that was required to be applied at national, regional and local level. [1] In the context of developing new eco-economic system adopted a number of international conventions that establish detailed obligations of the States and strict implementation deadlines climate change, biodiversity conservation, protection of forests and wetlands, limiting the use of certain chemicals, access information on the state of the environment and other international legal space outlining the practical application of the principles of sustainable economic development in ecological conditions.

  15. BREEAM Green Leaf Eco-rating Program

    International Nuclear Information System (INIS)

    2001-01-01

    The environmental performance of buildings is measured for several reasons, the main one being that it can help owners decide where to invest their retrofit dollars to maximize the energy performance of their building and reduce operating costs. The buildings constructed in the 1950s and 1960s in North America are reaching obsolescence and will require major retrofits to improve their energy efficiency, particularly in the area of mechanical equipment. In addition to reducing operating costs, better maintenance and environmental management of buildings can also address issues such as comfort, health, indoor air quality and productivity. In order to accurately measure the environmental performance of a building, it is necessary to develop a comprehensive measuring and benchmarking tool that would allow occupants to compare the buildings' performance with others. In this pilot study, 6 high-rise multi-residential buildings were assessed for environmental performance using the BREEAM Green Leaf assessment method. The methodology originated in Canada and was developed by ECD Energy, Environment Canada and Terra Choice. It combines the BREEAM set of environmental issues with the Green Leaf Eco-Rating technique. The method covers occupant health, energy efficiency, resource efficiency, environmental responsibility and affordability. Operation and management issues are also taken into consideration. The buildings used in this study were located in various locations, ranging from inner city housing to city/suburban areas. 2 tabs., 17 figs

  16. Ecos da poesia no leitor mirim

    Directory of Open Access Journals (Sweden)

    Flávia Brocchetto Ramos

    Full Text Available Resumo Este artigo relata, a partir de pesquisa empírica, como estudantes de 4° ano do Ensino Fundamental configuram o poético, por meio do estudo orientado de poemas veiculados em obras selecionadas pelo Programa Nacional Biblioteca da Escola (PNBE. Parte de investigação maior, o artigo propõe procedimentos mediadores para o poema "O eco", de Cecília Meireles, problematizando o letramento poético. A investigação apoia-se principalmente em Huizinga e Kirinus. O problema posto justifica-se em virtude de a formação de leitores ser um desafio para o âmbito educacional e para a criação e a manutenção de políticas públicas. O artigo contribui para apresentar possibilidade de inserção escolar do acervo do PNBE e aponta caminhos para o desenvolvimento do poético, que tende a ser pouco explorado na escola.

  17. The innovative application studty on eco-packaging design and materials

    Directory of Open Access Journals (Sweden)

    Cui Yong Min

    2016-01-01

    Full Text Available The paper solves the increasingly deteriorate environmental problems by positively exploring how to utilize and develop eco-packaging design reasonably. The paper explores an effective method that combines eco-packaging and environmental protection materials, hoping to define the sustainable development road of packaging design. The paper is centered on the design application of eco-packaging and environmental protection materials, applies and analyzes the method to obtain innovative design requirements and development tendency of eco-packaging design by analyzing status and significance of eco-packaging design, combining with the development and main types of eco-packaging packaging materials, and based on the achievements acquired by eco-packaging and environmental protection materials. Meanwhile, the paper also reveals mutual dependence and mutual promotion of eco-packaging design and eco-packaging materials.

  18. Nuclear reactors

    International Nuclear Information System (INIS)

    Middleton, J.E.

    1977-01-01

    Reference is made to water cooled reactors and in particular to the cooling system of steam generating heavy water reactors (SGHWR). A two-coolant circuit is described for the latter. Full constructural details are given. (U.K.)

  19. Reactor decommissioning

    International Nuclear Information System (INIS)

    Lawton, H.

    1984-01-01

    A pioneering project on the decommissioning of the Windscale Advanced Gas-cooled Reactor, by the UKAEA, is described. Reactor data; policy; waste management; remote handling equipment; development; and recording and timescales, are all briefly discussed. (U.K.)

  20. Energy sustainable cities. From eco villages, eco districts towards zero carbon cities

    Science.gov (United States)

    Zaręba, Anna; Krzemińska, Alicja; Łach, Janusz

    2017-11-01

    Minimizing energy consumption is the effect of sustainable design technics as among many others: designing buildings with solar access and natural ventilation, using climate responsive design materials and effective insulation. Contemporary examples of zero-carbon cities: Masdar City, United Arab Emirates and Dongtan, China, confirm technical feasibility of renewable energy by implementation of solar PV and wind technologies. The ecological city - medium or high density urban settlement separated by greenspace causes the smallest possible ecological footprint on the surrounding countryside through efficient use of land and its resources, recycling used materials and converting waste to energy. This paper investigates the concept of energy sustainable cities, examines, how urban settlements might affect building energy design in eco-villages, eco-districts (e.g. Vauban, Freiburg in Germany, Bo01 Malmo in Sweden), and discuss the strategies for achieving Zero Emission Cities principles in densely populated areas. It is focused on low energy architectural design solutions which could be incorporated into urban settlements to create ecological villages, districts and cities, designed with consideration of environmental impact, required minimal inputs of energy, water, food, waste and pollution.

  1. Eco-friendly dentistry: Need of future. An overview

    Directory of Open Access Journals (Sweden)

    Savy Arora

    2017-01-01

    Full Text Available In today's world, it is very necessary to understand the importance of being eco-friendly in every facet of our lives. The color “green” has healing power and denotes renewal, growth, and hope. “Eco-friendly dentistry” attempts to reduce the detrimental impact of dental practices on the environment and promote environmental awareness and sustainability to patients. This paper attempts to cover all possible aspects of making a dental practice eco-friendly, both in a dental perspective as well as a general perspective. While establishing an eco-friendly dental workplace, the dentist needs to assess his choices in planning the infrastructure and purchasing of equipment and dental materials. Eco-friendly dentistry is a newly evolving practice of dentistry, which encompasses a simultaneous devotion to sustainability, prevention, precaution, and a minimally invasive patient-centric, as well as global-centric treatment. There are two main avenues for implementing eco-friendly dentistry: (1 appropriate policy development and implementation and (2 dentists taking responsibility/ownership in the absence of policies and regulations. Although in some cases, it may take a little extra effort or money; dentists throughout the world are doing their best to reduce the environmental impact of the dental practice. Although the commitment of one small dental office cannot save the planet, certainly, the collective efforts of many small offices as well as large dental hospitals/colleges can ensure that dentists, at least, will not be responsible for destroying it. This article discusses various factors that can be incorporated into dental practice that can help make dentistry eco-friendly.

  2. RA Reactor

    International Nuclear Information System (INIS)

    1978-02-01

    In addition to basic characteristics of the RA reactor, organizational scheme and financial incentives, this document covers describes the state of the reactor components after 18 years of operation, problems concerned with obtaining the licence for operation with 80% fuel, problems of spent fuel storage in the storage pool of the reactor building and the need for renewal of reactor equipment, first of all instrumentation [sr

  3. Multiregion reactors

    International Nuclear Information System (INIS)

    Moura Neto, C. de; Nair, R.P.K.

    1979-08-01

    The study of reflected reactors can be done employing the multigroup diffusion method. The neutron conservation equations, inside the intervals, can be written by fluxes and group constants. A reflected reactor (one and two groups) for a slab geometry is studied, aplying the continuity of flux and current in the interface. At the end, the appropriated solutions for a infinite cylindrical reactor and for a spherical reactor are presented. (Author) [pt

  4. Nuclear reactor

    International Nuclear Information System (INIS)

    Hattori, Sadao; Sato, Morihiko.

    1994-01-01

    Liquid metals such as liquid metal sodium are filled in a reactor container as primary coolants. A plurality of reactor core containers are disposed in a row in the circumferential direction along with the inner circumferential wall of the reactor container. One or a plurality of intermediate coolers are disposed at the inside of an annular row of the reactor core containers. A reactor core constituted with fuel rods and control rods (module reactor core) is contained at the inside of each of the reactor core containers. Each of the intermediate coolers comprises a cylindrical intermediate cooling vessels. The intermediate cooling vessel comprises an intermediate heat exchanger for heat exchange of primary coolants and secondary coolants and recycling pumps for compulsorily recycling primary coolants at the inside thereof. Since a plurality of reactor core containers are thus assembled, a great reactor power can be attained. Further, the module reactor core contained in one reactor core vessel may be small sized, to facilitate the control for the reactor core operation. (I.N.)

  5. Nuclear power reactors

    International Nuclear Information System (INIS)

    1982-11-01

    After an introduction and general explanation of nuclear power the following reactor types are described: magnox thermal reactor; advanced gas-cooled reactor (AGR); pressurised water reactor (PWR); fast reactors (sodium cooled); boiling water reactor (BWR); CANDU thermal reactor; steam generating heavy water reactor (SGHWR); high temperature reactor (HTR); Leningrad (RMBK) type water-cooled graphite moderated reactor. (U.K.)

  6. Research reactors

    International Nuclear Information System (INIS)

    Merchie, Francois

    2015-10-01

    This article proposes an overview of research reactors, i.e. nuclear reactors of less than 100 MW. Generally, these reactors are used as neutron generators for basic research in matter sciences and for technological research as a support to power reactors. The author proposes an overview of the general design of research reactors in terms of core size, of number of fissions, of neutron flow, of neutron space distribution. He outlines that this design is a compromise between a compact enough core, a sufficient experiment volume, and high enough power densities without affecting neutron performance or its experimental use. The author evokes the safety framework (same regulations as for power reactors, more constraining measures after Fukushima, international bodies). He presents the main characteristics and operation of the two families which represent almost all research reactors; firstly, heavy water reactors (photos, drawings and figures illustrate different examples); and secondly light water moderated and cooled reactors with a distinction between open core pool reactors like Melusine and Triton, pool reactors with containment, experimental fast breeder reactors (Rapsodie, the Russian BOR 60, the Chinese CEFR). The author describes the main uses of research reactors: basic research, applied and technological research, safety tests, production of radio-isotopes for medicine and industry, analysis of elements present under the form of traces at very low concentrations, non destructive testing, doping of silicon mono-crystalline ingots. The author then discusses the relationship between research reactors and non proliferation, and finally evokes perspectives (decrease of the number of research reactors in the world, the Jules Horowitz project)

  7. Reactor physics and reactor computations

    International Nuclear Information System (INIS)

    Ronen, Y.; Elias, E.

    1994-01-01

    Mathematical methods and computer calculations for nuclear and thermonuclear reactor kinetics, reactor physics, neutron transport theory, core lattice parameters, waste treatment by transmutation, breeding, nuclear and thermonuclear fuels are the main interests of the conference

  8. Eco-labelling of shampoos, shower gels and foam baths.

    Science.gov (United States)

    Klaschka, Ursula; Liebig, Markus; Knacker, Thomas

    2007-01-01

    Environmental issues of personal care products have been met with little attention in the past. Monitoring data as well as preliminary environmental risk assessments indicate that some ingredients in personal care products might be relevant pollutants in the environment. Following the precautionary principle, eco-labelling is proposed as an effective tool for source control of one major group of personal care products, shampoos, shower gels and foam baths (SSBs). Eco-labelling is a soft, but effective market driven and product specific approach to lower discharge of environmentally detrimental substances. Products that fulfil the criteria proposed help to minimise the impact of SSBs on the environment. Available assessment tools for dangerous substances (e.g. current legislation on environmental risk assessments and classification, and labelling, eco-labelling criteria for similar products, the calculation of the critical dilution volume) were adapted and integrated into the criteria for the eco-labelling of SSBs. A short outline of the eco-labelling criteria developed for SSBs is provided. The basic criteria concern the effects of the substances discharged into the waste water during and after use. Products with an eco-label award may exclusively contain substances for which basic information about their effects on the environment is available. They may not contain persistent, bioaccumulating, toxic or ecotoxicological substances. In addition, the basic criteria include requirements for the container and consumer information. The basic criteria for eco-labelling SSBs are based on the actual state of science and are at the same time as simple and transparent as possible to ensure the best applicability. SSBs that comply with the described basic criteria can contribute to a lower chemical burden of waste water treatment plants and surface water. The proposal for basic criteria described should stimulate discussion on eco-labelling of SSBs. It should help to pass

  9. SOFT: smooth OPC fixing technique for ECO process

    Science.gov (United States)

    Zhang, Hongbo; Shi, Zheng

    2007-03-01

    SOFT (Smooth OPC Fixing Technique) is a new OPC flow developed from the basic OPC framework. It provides a new method to reduce the computation cost and complexities of ECO-OPC (Engineering Change Order - Optical Proximity Correction). In this paper, we introduce polygon comparison to extract the necessary but possibly lost fragmentation and offset information of previous post-OPC layout. By reusing these data, we can start the modification on each segment from a more accurate initial offset. In addition, the fragmentation method in the boundary of the patch in the previous OPC process is therefore available for engineers to stitch the regional ECO-OPC result back to the whole post-OPC layout seamlessly. For the ripple effect in the OPC, by comparing each segment's movement in each loop, we much free the fixing speed from the limitation of patch size. We handle layout remodification, especially in three basic kinds of ECO-OPC processes, while maintaining other design closure. Our experimental results show that, by utilizing the previous post-OPC layout, full-chip ECO-OPC can realize an over 5X acceleration and the regional ECO-OPC result can also be stitched back into the whole layout seamlessly with the ripple effect of the lithography interaction.

  10. Green Eco-Driving Effects in Non-Congested Cities

    Directory of Open Access Journals (Sweden)

    Juan Francisco Coloma

    2017-12-01

    Full Text Available Despite technological advances in engines and fuels, the transportation sector is still one of the largest emitters of greenhouse gas (GHG. Driving patterns, including eco-driving techniques, are a complementary measure for saving GHG emissions. Most eco-driving studies so far have been conducted in large cities suffering chronic congestion problems. The aim of this research is therefore to analyse the potential of driver behaviour for reducing emissions in a small non-congested city. Driver performance parameters such as travel speeds, number of stops, revolutions per minute, and maximum acceleration-deceleration are also studied. The methodology is designed to measure the effect of both eco-driving and eco-routing under real traffic conditions. A campaign was carried out in the city of Caceres (Spain to collect data on various types of roads under different traffic conditions. This research concludes that eco-driving leads to CO2 savings on all routes and road types of 17% in gasoline engines and 21% in diesel, although travel times are increased by 7.5% on average. The shortest route is also the most ecological, regardless of the traffic volume and characteristics, implying that consumption in non-congested cities depends mainly on distance travelled rather than driving patterns in terms of number of stops, speed and acceleration.

  11. O fundamento estrutural do pensamento de Umberto Eco

    Directory of Open Access Journals (Sweden)

    Winfried Nöth

    2016-08-01

    Full Text Available Uma análise detalhada apresenta o método argumentativo a contrario, característico do artigo "Existe a contracultura?", de Umberto Eco, como paradigmático do princípio estruturalista da constituição do sentido por meio de oposições semânticas. O artigo argumenta que muitos dos escritos de Eco podem ser lidos como aplicações do princípio estruturalista de que apenas diferenças ou oposições carregam significação. A evidência do modo como o pensamento de Eco está sob o encanto do princípio das oposições e da dialética da presença e da ausência é apresentada através do levantamento dos escritos gerais de Eco e também da inspeção das obras A estrutura ausente e Semiótica e filosofia da linguagem. Além disso, o artigo revela que o pensamento de Eco é igualmente atraído tanto por processos nos quais oposições anulam ou dissolvem a si próprias quanto pela crítica pós-estruturalista do pensamento estruturalista.

  12. Enabling Eco-Friendly Choices by Relying on the Proportional-Thinking Heuristic

    Directory of Open Access Journals (Sweden)

    Cleotilde Gonzalez

    2013-01-01

    Full Text Available Ecological (eco taxes are promising mechanisms to enable eco-friendly decisions, but few people prefer them. In this study, we present a way in which eco-tax options may be communicated to general public to encourage their payment. Our implementation (called “information presentation” takes advantage of the non-linear relationship between eco-tax payments and CO2 emissions and the human reliance on the proportional-thinking heuristic. According to the proportional-thinking heuristic, people are likely to prefer a small eco-tax increase and judge larger eco-tax increases to cause proportionally greater CO2 emissions reductions. In an online study, participants were asked to choose between eco-tax increases in two problems: In one, a smaller eco-tax increase resulted in greater CO2 emissions reduction, while in the other, a smaller tax increase resulted in lesser CO2 emissions reduction. Although the larger eco-tax increase did not reduce CO2 emissions the most, across both problems, people judged larger eco-tax increases to cause proportionally greater reductions in CO2 emissions and preferred smaller tax increases. Thus, eco-tax policies would benefit by presenting information in terms of eco-tax increases, such that smaller eco-tax increases (which are more attractive and are likely to be chosen by people cause greater CO2 emissions reductions.

  13. Research reactors

    International Nuclear Information System (INIS)

    Kowarski, L.

    1955-01-01

    It brings together the techniques data which are involved in the discussion about the utility for a research institute to acquire an atomic reactor for research purposes. This type of decision are often taken by non-specialist people who can need a brief presentation of a research reactor and its possibilities in term of research before asking advises to experts. In a first part, it draws up a list of the different research programs which can be studied by getting a research reactor. First of all is the reactor behaviour and kinetics studies (reproducibility factor, exploration of neutron density, effect of reactor structure, effect of material irradiation...). Physical studies includes study of the behaviour of the control system, studies of neutron resonance phenomena and study of the fission process for example. Chemical studies involves the study of manipulation and control of hot material, characterisation of nuclear species produced in the reactor and chemical effects of irradiation on chemical properties and reactions. Biology and medicine research involves studies of irradiation on man and animals, genetics research, food or medical tools sterilization and neutron beams effect on tumour for example. A large number of other subjects can be studied in a reactor research as reactor construction material research, fabrication of radioactive sources for radiographic techniques or applied research as in agriculture or electronic. The second part discussed the technological considerations when choosing the reactor type. The technological factors, which are considered for its choice, are the power of the reactor, the nature of the fuel which is used, the type of moderator (water, heavy water, graphite or BeO) and the reflector, the type of coolants, the protection shield and the control systems. In the third part, it described the characteristics (place of installation, type of combustible and comments) and performance (power, neutron flux ) of already existing

  14. Assessing ecological sustainability in urban planning - EcoBalance model

    Energy Technology Data Exchange (ETDEWEB)

    Wahlgren, I., Email: irmeli.wahlgren@vtt.fi

    2012-06-15

    Urban planning solutions and decisions have large-scale significance for ecological sustainability (eco-efficiency) the consumption of energy and other natural resources, the production of greenhouse gas and other emissions and the costs caused by urban form. Climate change brings new and growing challenges for urban planning. The EcoBalance model was developed to assess the sustainability of urban form and has been applied at various planning levels: regional plans, local master plans and detailed plans. The EcoBalance model estimates the total consumption of energy and other natural resources, the production of emissions and wastes and the costs caused directly and indirectly by urban form on a life cycle basis. The results of the case studies provide information about the ecological impacts of various solutions in urban development. (orig.)

  15. Umberto Eco: Freedom and the limits of artwork interpretation

    Directory of Open Access Journals (Sweden)

    Kršić Lamija

    2017-01-01

    Full Text Available In his study The Open Work (1962 Umberto Eco commenced his long term exploration of the nature of interpreting an artwork. The author problematizes the question of freedom and the limits of artwork interpretation in the context of semiology and theory of semiotics. Although the contemporary debates on interpreting art focus on interpretation and interpreter, that is to say, on unconditional openness of the work, Eco reminds us of the other side of the interpreting process - controllability of the interpretative activity and limitations of reading in new meanings. The paper points to the various theoretical basis on which Eco propagates the dialectics between the form and openness of a work of art, in other words, between intentio operis and intentio lectoris. This position enables him to differentiate art from nonart, as well as to consider interpretation of a work of art not as a self-sufficing process, but from the point of view of human experience.

  16. Theoretical Study of Watershed Eco-Compensation Standards

    Science.gov (United States)

    Yan, Dandan; Fu, Yicheng; Liu, Biu; Sha, Jinxia

    2018-01-01

    Watershed eco-compensation is an effective way to solve conflicts over water allocation and ecological destruction problems in the exploitation of water resources. Despite an increasing interest in the topic, the researches has neglected the effect of water quality and lacked systematic calculation method. In this study we reviewed and analyzed the current literature and proposedatheoretical framework to improve the calculation of co-compensation standard.Considering the perspectives of the river ecosystems, forest ecosystems and wetland ecosystems, the benefit compensation standard was determined by the input-output corresponding relationship. Based on the opportunity costs related to limiting development and water conservation loss, the eco-compensation standard was calculated.In order to eliminate the defects of eco-compensation implementation, the improvement suggestions were proposed for the compensation standard calculation and implementation.

  17. EcoDesign 2.0 - Quantitative EcoDesign within Drives and Automation Technologies

    DEFF Research Database (Denmark)

    Auer, Johannes

    with single products, eco-design of industrial automation and drive technologies has to address the key issue of the solution’s usage stage in terms of system design corresponding to the application context, where several products work in conjunction with each other. Further, in response to the above...... engineering approaches. Research focus lies in areas where these fields overlap and complement each other in the development process of given applications, in particular the development and implementation of Drives and Automation Technologies. The evaluation of the research background, based on research...... and currently implemented state-of-the-art of ecodesign of drives and automation technologies in discreet and process industries was evaluated, putting it in context to the processes and portfolio of the Siemens AG, Process Industries & Drives Division (PD), as well as current sustainability challenges...

  18. EVERYTHING MOVES NOTHING STANDS STILL. SOME ASPECTS ABOUT THE MEGASYSTEM EARTH ECO-SOC-ECO

    Directory of Open Access Journals (Sweden)

    Negucioiu Aurel

    2012-12-01

    Full Text Available One of the most important moments of the start or restart of the academic activity has always been the opening of courses in each subject (discipline that would be studied. On these occasions each professor shows to the students the subject of the discipline, place and role that intellectual seizure of that object in the formation of their professional competence required by the exigencies of the time. Most teachers stop on the most important sources, sources of knowledge that young learners can turn to and would be better to turn. They indicate written sources, books, magazines and other publications available in classical libraries and add, especially now, the world’s largest library: the Internet. However, teachers advise students to seek permanently another source, a "book" - permanently opened, the book of reality that contains the most truth and what is very important - many problems waiting to be discovered and resolved. Leafing over "the first pages" of one of the "volumes" of this huge established "book", I found that the paradigm "Everything moves. Nothing stands still" as the paradigm "movement is absolute, and the repose - roughly" is far from having exhausted full knowledge of "everything". But knowledge can enrich through investigation of the unknown aspects. Substantially reducing the size of the unknown we have subscribed to communicate, stopping on several sides and objectives of the issues: Further examination of the main contents of the concept of development; Nominate a limited number of forms of movement in the "kingdom" of the Megasystem Eco-soc-eco; Further investigation of the causes of motion; Pace to and rhythm in which the different forms of movement develop; Which are the directions in which evolve different directions of movement forms.

  19. Shedding Light on Eco-Innovation in Tourism: A Critical Analysis

    Directory of Open Access Journals (Sweden)

    Maria-del-Mar Alonso-Almeida

    2016-12-01

    Full Text Available The recent global increase in the competitiveness of tourism has made the implementation of eco-innovations a differentiating element among both the destinations and companies in the sector, with quality management and contribution to sustainable development being increasingly valued. However, the eco-innovations that have been developed and implemented in tourist industries have rarely been studied. In this study, the eco-innovations that have been developed and implemented by 57 tourism businesses worldwide are analysed. The identified eco-innovations are classified by using different qualitative methodologies. The obtained results shed light on the limited development of eco-innovations in the tourism industry and the industry focuses mainly on product eco-innovations. Several examples by the tourist sub-industry and types of eco-innovation are analysed. Furthermore, this study provides practical information about measures that both businesses and governmental organisations can adopt to promote eco-innovation in the sector.

  20. D3.6 Report on implementation of the ECO Federated Search infrastructure

    NARCIS (Netherlands)

    Ternier, Stefaan; Loozen, Kjeld; Viñuales, Javier; Tejera, Sara; Tomasini, Alessandra; Unruh, Sören

    2016-01-01

    This document describes the implementation of the ECO federated search architecture. It presents an analysis of various architectures and defines based on this analysis an architectural solution for federated search in ECO.

  1. Forest Ecosystem Services and Eco-Compensation Mechanisms in China

    Science.gov (United States)

    Deng, Hongbing; Zheng, Peng; Liu, Tianxing; Liu, Xin

    2011-12-01

    Forests are a major terrestrial ecosystem providing multiple ecosystem services. However, the importance of forests is frequently underestimated from an economic perspective because of the externalities and public good properties of these services. Forest eco-compensation is a transfer mechanism that serves to internalize the externalities of forest ecosystem services by compensating individuals or companies for the losses or costs resulting from the provision of these services. China's current forest eco-compensation system is centered mainly on noncommercial forest. The primary measures associated with ecosystem services are (1) a charge on destructive activities, such as indiscriminate logging, and (2) compensation for individual or local activities and investments in forest conservation. The Compensation Fund System for Forest Ecological Benefits was first listed in the Forest Law of the People's Republic of China in 1998. In 2004, the Central Government Financial Compensation Fund, an important source for the Compensation Fund for Forest Ecological Benefits, was formally established. To improve the forest eco-compensation system, it is crucial to design and establish compensation criteria for noncommercial forests. These criteria should take both theoretical and practical concerns into account, and they should be based on the quantitative valuation of ecosystem services. Although some initial headway has been made on this task, the implementation of an effective forest eco-compensation system in China still has deficiencies and still faces problems. Implementing classification-based and dynamic management for key noncommercial forests and establishing an eco-compensation mechanism with multiple funding sources in the market economy are the key measures needed to conquer these problems and improve the forest eco-compensation system and China's forestry development in sequence.

  2. Forest ecosystem services and eco-compensation mechanisms in China.

    Science.gov (United States)

    Deng, Hongbing; Zheng, Peng; Liu, Tianxing; Liu, Xin

    2011-12-01

    Forests are a major terrestrial ecosystem providing multiple ecosystem services. However, the importance of forests is frequently underestimated from an economic perspective because of the externalities and public good properties of these services. Forest eco-compensation is a transfer mechanism that serves to internalize the externalities of forest ecosystem services by compensating individuals or companies for the losses or costs resulting from the provision of these services. China's current forest eco-compensation system is centered mainly on noncommercial forest. The primary measures associated with ecosystem services are (1) a charge on destructive activities, such as indiscriminate logging, and (2) compensation for individual or local activities and investments in forest conservation. The Compensation Fund System for Forest Ecological Benefits was first listed in the Forest Law of the People's Republic of China in 1998. In 2004, the Central Government Financial Compensation Fund, an important source for the Compensation Fund for Forest Ecological Benefits, was formally established. To improve the forest eco-compensation system, it is crucial to design and establish compensation criteria for noncommercial forests. These criteria should take both theoretical and practical concerns into account, and they should be based on the quantitative valuation of ecosystem services. Although some initial headway has been made on this task, the implementation of an effective forest eco-compensation system in China still has deficiencies and still faces problems. Implementing classification-based and dynamic management for key noncommercial forests and establishing an eco-compensation mechanism with multiple funding sources in the market economy are the key measures needed to conquer these problems and improve the forest eco-compensation system and China's forestry development in sequence.

  3. Eco label and integrated product policies. Supporting companies by networking

    International Nuclear Information System (INIS)

    Frey, M.; Iraldo, F.

    1999-01-01

    In 1998 IEFE Bocconi University (Italy) carried out a project for the diffusion of the European Commission Eco label, the certification of the environmental quality of products. What clearly emerges from this experience is that some Italian SMEs, among the most innovative and market-oriented, are prone and ready to grasp the opportunities connected with the Eco label adoption. The more these enterprises are capable of starting up a network of socio-institutional actors eager to support them in promoting the environmental quality of their products, the more they succeed in exploiting the above mentioned opportunities [it

  4. Eco-power from the holiday-corner of Switzerland

    International Nuclear Information System (INIS)

    Niederhauesern, A.

    2005-01-01

    This article takes a look at how the Swiss Raetia-Energie group markets ecologically produced power. As opposed to physically delivering the electricity to its eco-customers, Raetia Energie sells certificates for the production of this form of clean power. The price of the certificates reflects the difference between the higher price for the eco-electricity and normal, non-certified power. The article discusses this mechanism, which is successfully used for customers in Switzerland and Germany. Part of the earnings made from the 'Naturemade Star' certified electricity is used to finance ecological projects in the company's area, famous for its tourist attractions

  5. Landscape of Industry: Transformation of (Eco Industrial Park through history

    Directory of Open Access Journals (Sweden)

    Archana Sharma

    2013-11-01

    Full Text Available The landscape of industry has been changing over time. Industry has transformed and many tangents have emerged from the sporadic home-based cottage industries to geographically scattered large manufacturing industries to co-located industrial parks to environment friendly eco-industrial parks. Curiosity about the catalysts that bring about the transformation of industrial landscape is the motivation of this article. Through the narrative on Industrial Park and the gradual shift towards Eco-Industrial Park, this article aims to shed light on the context and conditions that act as catalysts for industrial transformations, so as to serve as a reference for predicting future changes in industrial landscape.

  6. EcoVillage: A Net Zero Energy Ready Community

    Energy Technology Data Exchange (ETDEWEB)

    Arena, L. [Consortium for Advanced Residential Buildings, Norwalk, CT (United States); Faakye, O. [Consortium for Advanced Residential Buildings, Norwalk, CT (United States)

    2015-02-01

    CARB is working with the EcoVillage co-housing community in Ithaca, New York, on their third neighborhood called the Third Residential EcoVillage Experience (TREE). This community scale project consists of 40 housing units --15 apartments and 25 single family residences. The community is pursuing certifications for DOE Zero Energy Ready Home, U.S. Green Building Council Leadership in Energy and Environmental Design Gold, and ENERGY STAR for the entire project. Additionally, seven of the 25 homes, along with the four-story apartment building and community center, are being constructed to the Passive House (PH) design standard.

  7. Designing environmental performance indicators (EPIs) for eco-efficiency

    International Nuclear Information System (INIS)

    Campbell, B.

    1997-01-01

    Environmental performance indicators (EPI) were discussed and a method by which companies can design indicators to help measure their progress toward greater eco-efficiency was presented. EPIs are quantitative measures of environmental performance. EPIs can measure one attribute, such as effluent released to water, or they can be a complex index. EPIs track impacts on the environment and provide information for decision making. The need for more eco-efficient companies, i.e. companies that produce useful goods and services while reducing their consumption of resources and while making efforts to reduce pollution, was emphasized

  8. A Product Line Analysis for Eco-Designed Fashion Products: Evidence from an Outdoor Sportswear Brand

    OpenAIRE

    Luo Wang; Bin Shen

    2017-01-01

    With the increasing awareness of sustainability, eco-design has been an important trend in the fashion industry. Many fashion brands such as Nike, Adidas, and The North Face have developed sustainable fashion by incorporating eco-design elements. Eco-design is an important part of sustainable supply chains. In this paper, we conducted a product line analysis of eco-designed products from a famous outdoor sportswear brand, Patagonia. We collected Patagonia’s 2017 Spring Season product line dat...

  9. Reactor container

    International Nuclear Information System (INIS)

    Naruse, Yoshihiro.

    1990-01-01

    The thickness of steel shell plates in a reactor container embedded in sand cussions is monitored to recognize the corrosion of the steel shell plates. That is, the reactor pressure vessel is contained in a reactor container shell and the sand cussions are disposed on the lower outside of the reactor container shell to elastically support the shell. A pit is disposed at a position opposing to the sand cussions for measuring the thickness of the reactor container shell plates. The pit is usually closed by a closing member. In the reactor container thus constituted, the closing member can be removed upon periodical inspection to measure the thickness of the shell plates. Accordingly, the corrosion of the steel shell plates can be recognized by the change of the plate thickness. (I.S.)

  10. Hybrid reactors

    International Nuclear Information System (INIS)

    Moir, R.W.

    1980-01-01

    The rationale for hybrid fusion-fission reactors is the production of fissile fuel for fission reactors. A new class of reactor, the fission-suppressed hybrid promises unusually good safety features as well as the ability to support 25 light-water reactors of the same nuclear power rating, or even more high-conversion-ratio reactors such as the heavy-water type. One 4000-MW nuclear hybrid can produce 7200 kg of 233 U per year. To obtain good economics, injector efficiency times plasma gain (eta/sub i/Q) should be greater than 2, the wall load should be greater than 1 MW.m -2 , and the hybrid should cost less than 6 times the cost of a light-water reactor. Introduction rates for the fission-suppressed hybrid are usually rapid

  11. Nuclear reactor

    International Nuclear Information System (INIS)

    Garabedian, G.

    1988-01-01

    A liquid reactor is described comprising: (a) a reactor vessel having a core; (b) one or more satellite tanks; (c) pump means in the satellite tank; (d) heat exchanger means in the satellite tank; (e) an upper liquid metal conduit extending between the reactor vessel and the satellite tank; (f) a lower liquid metal duct extending between the reactor vessel and satellite tanks the upper liquid metal conduit and the lower liquid metal duct being arranged to permit free circulation of liquid metal between the reactor vessel core and the satellite tank by convective flow of liquid metal; (g) a separate sealed common containment vessel around the reactor vessel, conduits and satellite tanks; (h) the satellite tank having space for a volume of liquid metal that is sufficient to dampen temperature transients resulting from abnormal operating conditions

  12. Measured transfer factors in milk and meat after the Chernobyl reactor accident

    International Nuclear Information System (INIS)

    Bonka, H.; Kueppers, J.; Maqua, M.

    1988-01-01

    After the nuclear reactor accident at Chernobyl the radioactivity in the environment in Aachen was measured in detail at the Lehrgebiet Strahlenschutz in der Kerntechnik. The change of the different radionuclides in the eco-system made it possible to obtain radioecological parameters especially for iodine and caesium. The knowledge about the transport of iodine into cow's milk could be very much improved

  13. Field testing of eco-speed control using V2I communication.

    Science.gov (United States)

    2016-04-15

    This research focused on the development of an Eco-Cooperative Adaptive Cruise Control (EcoCACC) : System and addressed the implementation issues associated with applying it in the field. : The Eco-CACC system computes and recommends a fuel-efficient...

  14. The Effect of Eco-Schools on Children's Environmental Values and Behaviour

    Science.gov (United States)

    Boeve-de Pauw, Jelle; Van Petegem, Peter

    2013-01-01

    The study examines the effectiveness of eco-schools concerning their students' environmental values and environmental behaviour, and includes 1287 children from fifty-nine schools (thirty-eight eco-schools and twenty-one control schools) in Flanders. Controlling for effects of gender and socio-economic status, analyses show that eco-schools have…

  15. Nuclear reactor

    International Nuclear Information System (INIS)

    Batheja, P.; Huber, R.; Rau, P.

    1985-01-01

    Particularly for nuclear reactors of small output, the reactor pressure vessel contains at least two heat exchangers, which have coolant flowing through them in a circuit through the reactor core. The circuit of at least one heat exchanger is controlled by a slide valve, so that even for low drive forces, particularly in natural circulation, the required even loading of the heat exchanger is possible. (orig./HP) [de

  16. Heterogeneous reactors

    International Nuclear Information System (INIS)

    Moura Neto, C. de; Nair, R.P.K.

    1979-08-01

    The microscopic study of a cell is meant for the determination of the infinite multiplication factor of the cell, which is given by the four factor formula: K(infinite) = n(epsilon)pf. The analysis of an homogeneous reactor is similar to that of an heterogeneous reactor, but each factor of the four factor formula can not be calculated by the formulas developed in the case of an homogeneous reactor. A great number of methods was developed for the calculation of heterogeneous reactors and some of them are discussed. (Author) [pt

  17. Eco-innovation: reflections on an evolving research agenda

    NARCIS (Netherlands)

    Berkhout, F.G.H.

    2011-01-01

    This short paper reviews some trends in social science research on eco-innovation, drawing attention to four trends in particular: better disaggregated empirical research on firms, research on knowledge and technology flows, linkage of economic and physical models and growing sophistication in the

  18. Measuring Eco-efficiency of Production with Data Envelopment Analysis

    NARCIS (Netherlands)

    Kuosmanen, T.K.; Kortelainen, M.

    2005-01-01

    Aggregation of environmental pressures into a single environmental damage index is a major challenge of eco-efficiency measurement. This article examines how the data envelopment analysis (DEA) method can be adapted for this purpose. DEA accounts for substitution possibilities between different

  19. Urban eco-efficiency and system dynamics modelling

    Energy Technology Data Exchange (ETDEWEB)

    Hradil, P., Email: petr.hradil@vtt.fi

    2012-06-15

    Assessment of urban development is generally based on static models of economic, social or environmental impacts. More advanced dynamic models have been used mostly for prediction of population and employment changes as well as for other macro-economic issues. This feasibility study was arranged to test the potential of system dynamic modelling in assessing eco-efficiency changes during urban development. (orig.)

  20. ECO-generation for some restricted classes of compositions

    Directory of Open Access Journals (Sweden)

    Jean-Luc Baril

    2013-04-01

    Full Text Available We study several restricted classes of compositions by giving one-to-one maps between them and different classes of restricted binary strings or pattern avoiding permutations. Inspired by the ECO method \\cite{BDPP99}, new succession rules for these classes are presented. Finally, we obtain generating algorithms in Constant Amortized Time (CAT for theses classes.

  1. The EcoHealth Journal: Connecting the ecohealth community ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2011-05-09

    May 9, 2011 ... "We need [the EcoHealth] journal to help articulate what ecohealth is and to ... Ecosystems and Human Health ... Ecohealth is also unusual in academia because it encompasses both basic and applied science. "It is the ... Membership in the International Association for Ecology and Health, which publishes ...

  2. Candidate eco-friendly gas mixtures for MPGDs

    Science.gov (United States)

    Benussi, L.; Bianco, S.; Saviano, G.; Muhammad, S.; Piccolo, D.; Ferrini, M.; Parvis, M.; Grassini, S.; Colafranceschi, S.; Kjølbro, J.; Sharma, A.; Yang, D.; Chen, G.; Ban, Y.; Li, Q.

    2018-02-01

    Modern gas detectors for detection of particles require F-based gases for optimal performance. Recent regulations demand the use of environmentally unfriendly F-based gases to be limited or banned. This review studies properties of potential eco-friendly gas candidate replacements.

  3. Policies and Strategies for Eco-Friendly Dairy Product

    NARCIS (Netherlands)

    Ziggers, G.W.; Conte, F.; Del Nobile, M.A.; Faccia, M.; Zambrini, A.V.; Conte, A.

    2017-01-01

    Despite the growing interest in, and market for, eco-friendly dairy production, a large-scale transition is not taking place. This is partly explained by the institutional context, since dairy production is organized in supply chains that generate interdependencies and, in turn, are subject to

  4. EcoWellness: The Missing Factor in Holistic Wellness Models

    Science.gov (United States)

    Reese, Ryan F.; Myers, Jane E.

    2012-01-01

    A growing body of multidisciplinary literature has delineated the benefits that natural environments have on physical and mental health. Current wellness models in counseling do not specifically address the impact of nature on wellness or how the natural world can be integrated into counseling. The concept of EcoWellness is presented as the…

  5. Introducing guidelines for eco-dynamic development and design

    NARCIS (Netherlands)

    Van Koningsveld, M.; Van Raalte, G.H.

    2011-01-01

    One of the key activities within the Building with Nature innovation programme is the development of a guideline for Eco-dynamic Development and Design. This guidance will be focussed on implementation of the Building with Nature principles throughout all of the stages of hydraulic engineering

  6. Eco-Dimensionality as a Religious Foundation for Sustainability

    Directory of Open Access Journals (Sweden)

    Susan Power Bratton

    2018-03-01

    Full Text Available Academics have critiqued the Abrahamic faiths, particularly Christianity, as inadequate to respond to today’s environmental dilemmas due to abstract theological qualities like the concept of a unified or transcendent God. Christianity and Islam are the earth’s most populous religions, however, and they are growing in the global south. A literature review finds that both indigenous and world religions develop strategies for environmental sustainability. Examples include: Amazonian fisheries, Islamic gardens, monastic forest management, Baptist LEED certified buildings, and Christian agrarian stewardship. These cases share a characteristic termed eco-dimensionality, defined as the integrative expression of environmental values, caretaking norms and sustainable practices in all aspects of religion, that recognizes and specifically adapts to keystone environmental processes and ecosystemic or geo-physical diversity. Religious eco-dimensionality incorporates: inventorying biota and ecosystems, recognizing environmental spatial and temporal dynamics at multiple scales, understanding communitarian and anti-communitarian human behaviors, structuring social networks, adopting sustainable technologies, and developing an integrative repertoire of religious symbols, aesthetic endeavors and ceremonies. Eco-dimensionality can evolve to address new issues. Negatively stereotyping faith traditions can inhibit constructive conversations concerning environmental issues and development of religious symbols and practices enhancing eco-dimensionality.

  7. Consumer values and eco-fashion in the future

    OpenAIRE

    Niinimäki, Kirsi

    2009-01-01

    This paper discusses the consumer values, attitudes and expectations regarding sustainable textiles and clothing. Consumers' interest in ethical issues is currently raising ethical questions in the mass market. What does a consumer expect from sustainable products in the apparel industry? and what is future eco-fashion?

  8. Personalised feedback and eco-driving: An explorative study

    NARCIS (Netherlands)

    Brouwer, R.F.T.; Stuiver, A.; Hof, T.; Kroon, L.; Pauwelussen, J.; Holleman, B.

    2015-01-01

    Conventional road transport has negative impact on the environment. Stimulating eco-driving through feedback to the driver about his/her energy conservation performance has the potential to reduce CO2 emissions and promote fuel cost savings. Not all drivers respond well to the same type

  9. Umberto Eco on Libraries: A Discussion of "De Biblioteca."

    Science.gov (United States)

    Winter, Michael F.

    1994-01-01

    Discusses a scholar's reactions to libraries made by Umberto Eco in "De Biblioteca." Topics addressed include functions of libraries, including collecting; accessibility of materials; the scholar's creative use of libraries, and discovering materials not looked for or known about; North American research libraries; photocopying; and…

  10. Small and Shaping the Future Energy Eco-house System

    Science.gov (United States)

    Furukawa, Ryuzo; Takahashi, Hideyuki; Sato, Yoshinori; Sasaki, Hiroshi; Isu, Norifumi; Ohtsuka, Masuo; Tohji, Kazuyuki

    2010-11-01

    The objective of this research is to develop the elemental technology of the small and thin energy collection system from water, wind, and others in the house, and examine them at the eco-house which will be built at Tohoku University on March 2010. This small energy storage system will contribute to reduce 10% of greenhouse gas emission from household electricity. This project is done by three following groups. 1st group (NEC-Tokin Co. Ltd.) will develop the technologies on the accumulation of electric power pressured from low electric power in which electricity is generated and on the cooperation with AC power supply used for domestic use for this eco-house system. 2nd group (INAX Co. Ltd.) will develop the elemental technology of the slight energy collection system from tap water in the home using a small hydroelectric generator for this eco-house system. 3rd group (Shoei Co. Ltd.) will develop the technologies on existent magnetic gear device, health appliances (Exercise bike), wind power generator, for this eco-house system. Tokoku University compiles these groups. Furthermore, I develop a search of unused small energy and the use technology, and propose a new energy supply system using solar cell and Li ion secondary battery.

  11. EcoHealth Student: Emerging Researcher Awards encourages ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2011-05-10

    May 10, 2011 ... ... who were paired with EcoHealth board members or journal editors to score ... Students' work was evaluated based on its contribution to science and ecohealth. ... Through her previous epidemiological and medical research, and ... Her research findings have been surprising and run counter to global ...

  12. Elk viewing in Pennsylvania: an evolving eco-tourism system

    Science.gov (United States)

    Bruce E. Lord; Charles H. Strauss; Michael J. Powell

    2002-01-01

    In 1997, the Pennsylvania Game Commission established an Elk Viewing Area within Pennsylvania's elk range. The viewing area has become the focus for a developing eco-tourism system. During the four years of operation, a research team from Penn State has measured the number of visitors, their expenditure patterns, and other parameters of their visit. The trends...

  13. Perspectives on the Eco-Schools Programme: An Environment ...

    African Journals Online (AJOL)

    Perspectives on the Eco-Schools Programme: An Environment/Education Dialogue. K Ward, K Schnack. Abstract. No Abstract. Full Text: EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT · Creative Commons License This work is licensed under a Creative Commons ...

  14. Sustainable wetland resource utilization of Sango Bay through Eco ...

    African Journals Online (AJOL)

    Defining and achieving sustainable development is a major issue for policy debates both in the developed and developing countries. Eco-tourism as an important niche market in the world tourism industry has been embraced by developing countries like Uganda, which are trying to use tourism as an engine of national ...

  15. Prospects for Urban Eco-Tourism in Nairobi, Kenya: Experiences ...

    African Journals Online (AJOL)

    Despite the positive impact of urban tourism and eco-tourism on the city's economy, as well as the well-being of its citizenry, less attention has been given to it in developing countries. This paper argues that Nairobi city is well endowed with a wide range of natural ecological and bio-physical heritage and green spaces that ...

  16. Um eco de tumultos e de sombras Partitura

    Directory of Open Access Journals (Sweden)

    Willian Lentz

    2014-12-01

    Full Text Available Este memorial apresenta os fundamentos composicionais e uma breve análise estrutural da obra para piano Um eco de tumultos e de sombras, na qual são aplicadas técnicas estendidas através de ferramentas que ferem diretamente as cordas do instrumento.

  17. ECO-Report - Scale matters - some thoughts on landscape sustainability

    Science.gov (United States)

    Sharon Ritter; Janie Canton-Thompson; Greg Jones; Ward McCaughey; Dave Calkin; Mick Harrington; Peter Kolb; LaWen Hollingsworth; Joe Jensen; Katie Knotek; Brooke Thompson

    2005-01-01

    ECO-Report is an annual Rocky Mountain Research Station (RMRS) publication which contains a set of articles showcasing the Bitterroot Ecosystem Management Research Project (BEMRP) research projects and activities. The articles are concise, user-friendly, and designed to inform a broad range of audiences interested in ecosystem management. Articles featured in...

  18. Estimation methods of eco-environmental water requirements: Case study

    Institute of Scientific and Technical Information of China (English)

    YANG Zhifeng; CUI Baoshan; LIU Jingling

    2005-01-01

    Supplying water to the ecological environment with certain quantity and quality is significant for the protection of diversity and the realization of sustainable development. The conception and connotation of eco-environmental water requirements, including the definition of the conception, the composition and characteristics of eco-environmental water requirements, are evaluated in this paper. The classification and estimation methods of eco-environmental water requirements are then proposed. On the basis of the study on the Huang-Huai-Hai Area, the present water use, the minimum and suitable water requirement are estimated and the corresponding water shortage is also calculated. According to the interrelated programs, the eco-environmental water requirements in the coming years (2010, 2030, 2050) are estimated. The result indicates that the minimum and suitable eco-environmental water requirements fluctuate with the differences of function setting and the referential standard of water resources, and so as the water shortage. Moreover, the study indicates that the minimum eco-environmental water requirement of the study area ranges from 2.84×1010m3 to 1.02×1011m3, the suitable water requirement ranges from 6.45×1010m3 to 1.78×1011m3, the water shortage ranges from 9.1×109m3 to 2.16×1010m3 under the minimum water requirement, and it is from 3.07×1010m3 to 7.53×1010m3 under the suitable water requirement. According to the different values of the water shortage, the water priority can be allocated. The ranges of the eco-environmental water requirements in the three coming years (2010, 2030, 2050) are 4.49×1010m3-1.73×1011m3, 5.99×10m3?2.09×1011m3, and 7.44×1010m3-2.52×1011m3, respectively.

  19. Slurry reactors

    Energy Technology Data Exchange (ETDEWEB)

    Kuerten, H; Zehner, P [BASF A.G., Ludwigshafen am Rhein (Germany, F.R.)

    1979-08-01

    Slurry reactors are designed on the basis of empirical data and model investigations. It is as yet not possible to calculate the flow behavior of such reactors. The swarm of gas bubbles and cluster formations of solid particles and their interaction in industrial reactors are not known. These effects control to a large extent the gas hold-up, the gas-liquid interface and, similarly as in bubble columns, the back-mixing of liquids and solids. These hydrodynamic problems are illustrated in slurry reactors which constructionally may be bubble columns, stirred tanks or jet loop reactors. The expected effects are predicted by means of tests with model systems modified to represent the conditions in industrial hydrogenation reactors. In his book 'Mass Transfer in Heterogeneous Catalysis' (1970) Satterfield complained of the lack of knowledge about the design of slurry reactors and hence of the impossible task of the engineer who has to design a plant according to accepted rules. There have been no fundamental changes since then. This paper presents the problems facing the engineer in designing slurry reactors, and shows new development trends.

  20. Reactor safety

    International Nuclear Information System (INIS)

    Butz, H.P.; Heuser, F.W.; May, H.

    1985-01-01

    The paper comprises an introduction into nuclear physics bases, the safety concept generally speaking, safety devices of pwr type reactors, accident analysis, external influences, probabilistic safety assessment and risk studies. It further describes operational experience, licensing procedures under the Atomic Energy Law, research in reactor safety and the nuclear fuel cycle. (DG) [de

  1. Nuclear reactor

    International Nuclear Information System (INIS)

    Mysels, K.J.; Shenoy, A.S.

    1976-01-01

    A nuclear reactor is described in which the core consists of a number of fuel regions through each of which regulated coolant flows. The coolant from neighbouring fuel regions is combined in a manner which results in an averaging of the coolant temperature at the outlet of the core. By this method the presence of hot streaks in the reactor is reduced. (UK)

  2. Reactor container

    International Nuclear Information System (INIS)

    Kato, Masami; Nishio, Masahide.

    1987-01-01

    Purpose: To prevent the rupture of the dry well even when the melted reactor core drops into a reactor pedestal cavity. Constitution: In a reactor container in which a dry well disposed above the reactor pedestal cavity for containing the reactor pressure vessel and a torus type suppression chamber for containing pressure suppression water are connected with each other, the pedestal cavity and the suppression chamber are disposed such that the flow level of the pedestal cavity is lower than the level of the pressure suppression water. Further, a pressure suppression water introduction pipeway for introducing the pressure suppression water into the reactor pedestal cavity is disposed by way of an ON-OFF valve. In case if the melted reactor core should fall into the pedestal cavity, the ON-OFF valve for the pressure suppression water introduction pipeway is opened to introduce the pressure suppression water in the suppression chamber into the pedestal cavity to cool the melted reactor core. (Ikeda, J.)

  3. RA Reactor

    International Nuclear Information System (INIS)

    1989-01-01

    This chapter includes the following: General description of the RA reactor, organization of work, responsibilities of leadership and operators team, regulations concerning operation and behaviour in the reactor building, regulations for performing experiments, regulations and instructions for inserting samples into experimental channels [sr

  4. Reactor physics

    International Nuclear Information System (INIS)

    Ait Abderrahim, H.

    1998-01-01

    Progress in research on reactor physics in 1997 at the Belgian Nuclear Research Centre SCK/CEN is described. Activities in the following four domains are discussed: core physics, ex-core neutron transport, experiments in Materials Testing Reactors, international benchmarks

  5. A distributed eco-hydrological model and its application

    Directory of Open Access Journals (Sweden)

    Zong-xue Xu

    2017-10-01

    Full Text Available Eco-hydrological processes in arid areas are the focus of many hydrological and water resources studies. However, the hydrological cycle and the ecological system have usually been considered separately in most previous studies, and the correlation between the two has not been fully understood. Interdisciplinary research on eco-hydrological processes using multidisciplinary knowledge has been insufficient. In order to quantitatively analyze and evaluate the interaction between the ecosystem and the hydrological cycle, a new kind of eco-hydrological model, the ecology module for a grid-based integrated surface and groundwater model (Eco-GISMOD, is proposed with a two-way coupling approach, which combines the ecological model (EPIC and hydrological model (GISMOD by considering water exchange in the soil layer. Water interaction between different soil layers is simply described through a generalized physical process in various situations. A special method was used to simulate the water exchange between plants and the soil layer, taking into account precipitation, evapotranspiration, infiltration, soil water replenishment, and root water uptake. In order to evaluate the system performance, the Heihe River Basin in northwestern China was selected for a case study. The results show that forests and crops were generally growing well with sufficient water supply, but water shortages, especially in the summer, inhibited the growth of grass and caused grass degradation. This demonstrates that water requirements and water consumption for different kinds of vegetation can be estimated by considering the water-supply rules of Eco-GISMOD, which will be helpful for the planning and management of water resources in the future.

  6. Green Port / Eco Port Project - Applications and Procedures in Turkey

    Science.gov (United States)

    Akgul, Burak

    2017-12-01

    As being the heartlands of international trade, sea ports are the junction points of land and sea routes. The growth of global trade has led to the development of number and capacity as well as the service quality of ports. The policies and procedures applied during construction, operation and development of ports under development with environmental considerations scope has evolved in accordance with the needs of global trends. Although maritime transportation provides the most ecofriendly transportation method, the reduction of potential environmental threats and continuous improvement of ports and their vicinity is paramount from environmental concerns with regards to the international environmental standards. In the context of the study, national and international legal regulations governing the control of the environmental impacts of the activity groups causing pollution in Turkey based sea ports were viewed. In addition, the models applied during the measurement and documentation of environmental impacts were investigated. The most important aspects in terms of the effectiveness of the environmental management models are legal regulations. However, the standards applied at the ports without any legal obligation, such as EcoPorts applications, ISO 14001 standard, and the EMAS (Eco-Management and Audit Scheme) were sought in the scope of the study. The boundaries of the study were determined as the EU based Environmental Management Systems and the Green Port/Eco Port Project which is being administered by the Turkish Ministry of Transport, Maritime and Communication. “Marport”, which is Turkey’s first certified Green Port / Eco Port is designated as the experimental study site. In addition, the provisions in the ports of ESPO member countries are approached in order to compare the effectiveness and applicability of Green Port / Eco Port Project.

  7. Eco-genetic modeling of contemporary life-history evolution.

    Science.gov (United States)

    Dunlop, Erin S; Heino, Mikko; Dieckmann, Ulf

    2009-10-01

    We present eco-genetic modeling as a flexible tool for exploring the course and rates of multi-trait life-history evolution in natural populations. We build on existing modeling approaches by combining features that facilitate studying the ecological and evolutionary dynamics of realistically structured populations. In particular, the joint consideration of age and size structure enables the analysis of phenotypically plastic populations with more than a single growth trajectory, and ecological feedback is readily included in the form of density dependence and frequency dependence. Stochasticity and life-history trade-offs can also be implemented. Critically, eco-genetic models permit the incorporation of salient genetic detail such as a population's genetic variances and covariances and the corresponding heritabilities, as well as the probabilistic inheritance and phenotypic expression of quantitative traits. These inclusions are crucial for predicting rates of evolutionary change on both contemporary and longer timescales. An eco-genetic model can be tightly coupled with empirical data and therefore may have considerable practical relevance, in terms of generating testable predictions and evaluating alternative management measures. To illustrate the utility of these models, we present as an example an eco-genetic model used to study harvest-induced evolution of multiple traits in Atlantic cod. The predictions of our model (most notably that harvesting induces a genetic reduction in age and size at maturation, an increase or decrease in growth capacity depending on the minimum-length limit, and an increase in reproductive investment) are corroborated by patterns observed in wild populations. The predicted genetic changes occur together with plastic changes that could phenotypically mask the former. Importantly, our analysis predicts that evolutionary changes show little signs of reversal following a harvest moratorium. This illustrates how predictions offered by

  8. Eco-cities as an Assemblage of Worlding Practices

    Directory of Open Access Journals (Sweden)

    Zack Lee

    2015-09-01

    Full Text Available Eco-cities are gaining attention in policy and academic circles over the past few years. Yet they pose difficulties as objects of study since they have been diversely defined and implemented. This paper argues that eco-cities are better understood as an assemblage of worlding practices. Combining these two concepts foregoes the emphasis on the eco-city’s physical structures and focuses more on its policy environment and its relations with other locations. The case study being examined is the Philippine’s Clark Green, the country’s first eco-city project. Its main proponent is an independent government agency, the Bases Conversion and Development Authority (BCDA, tasked with developing former military locations for civilian uses. Their vision is to create a world-class project built by international stakeholders in order to elevate the status of the Philippines and the Filipinos. They have chosen to emulate the Songdo International Business District in South Korea as their benchmark model. Not only are they adopting the ideas of a smart city but also similar strategies to enter the international education and logistics industries. The paper will show how the BCDA uses the eco-city idea as a tool to enter various national and international discourses that extend beyond the project’s geographical boundaries. Yet the strategies and visions of an independent government-owned corporation are tempered by challenges from local stakeholders, conflicting national priorities, and failures from similar policies applied elsewhere. The paper highlights the need for worlding projects to be embedded in their own national context for greater policy coordination.

  9. Eco-evolutionary spatial dynamics in the Glanville fritillary butterfly.

    Science.gov (United States)

    Hanski, Ilkka A

    2011-08-30

    Demographic population dynamics, gene flow, and local adaptation may influence each other and lead to coupling of ecological and evolutionary dynamics, especially in species inhabiting fragmented heterogeneous environments. Here, I review long-term research on eco-evolutionary spatial dynamics in the Glanville fritillary butterfly inhabiting a large network of approximately 4,000 meadows in Finland. The metapopulation persists in a balance between frequent local extinctions and recolonizations. The genetic spatial structure as defined by neutral markers is much more coarse-grained than the demographic spatial structure determined by the fragmented habitat, yet small-scale spatial structure has important consequences for the dynamics. I discuss three examples of eco-evolutionary spatial dynamics. (i) Extinction-colonization metapopulation dynamics influence allele frequency changes in the phosphoglucose isomerase (Pgi) gene, which leads to strong associations between genetic variation in Pgi and dispersal, recolonization, and local population dynamics. (ii) Inbreeding in local populations increases their risk for extinction, whereas reciprocal effects between inbreeding, population size, and emigration represent likely eco-evolutionary feedbacks. (iii) Genetically determined female oviposition preference for two host plant species exhibits a cline paralleling a gradient in host plant relative abundances, and host plant preference of dispersing females in relation to the host plant composition of habitat patches influences immigration (gene flow) and recolonization (founder events). Eco-evolutionary spatial dynamics in heterogeneous environments may not lead to directional evolutionary changes unless the environment itself changes, but eco-evolutionary dynamics may contribute to the maintenance of genetic variation attributable to fluctuating selection in space and time.

  10. Reactor core

    International Nuclear Information System (INIS)

    Azekura, Kazuo; Kurihara, Kunitoshi.

    1992-01-01

    In a BWR type reactor, a great number of pipes (spectral shift pipes) are disposed in the reactor core. Moderators having a small moderating cross section (heavy water) are circulated in the spectral shift pipes to suppress the excess reactivity while increasing the conversion ratio at an initial stage of the operation cycle. After the intermediate stage of the operation cycle in which the reactor core reactivity is lowered, reactivity is increased by circulating moderators having a great moderating cross section (light water) to extend the taken up burnup degree. Further, neutron absorbers such as boron are mixed to the moderator in the spectral shift pipe to control the concentration thereof. With such a constitution, control rods and driving mechanisms are no more necessary, to simplify the structure of the reactor core. This can increase the fuel conversion ratio and control great excess reactivity. Accordingly, a nuclear reactor core of high conversion and high burnup degree can be attained. (I.N.)

  11. Reactor container

    International Nuclear Information System (INIS)

    Fukazawa, Masanori.

    1991-01-01

    A system for controlling combustible gases, it has been constituted at present such that the combustible gases are controlled by exhausting them to the wet well of a reactor container. In this system, however, there has been a problem, in a reactor container having plenums in addition to the wet well and the dry well, that the combustible gases in such plenums can not be controlled. In view of the above, in the present invention, suction ports or exhaust ports of the combustible gas control system are disposed to the wet well, the dry well and the plenums to control the combustible gases in the reactor container. Since this can control the combustible gases in the entire reactor container, the integrity of the reactor container can be ensured. (T.M.)

  12. Reactor container

    International Nuclear Information System (INIS)

    Kojima, Yoshihiro; Hosomi, Kenji; Otonari, Jun-ichiro.

    1997-01-01

    In the present invention, a catalyst for oxidizing hydrogen to be disposed in a reactor container upon rupture of pipelines of a reactor primary coolant system is prevented from deposition of water droplets formed from a reactor container spray to suppress elevation of hydrogen concentration in the reactor container. Namely, a catalytic combustion gas concentration control system comprises a catalyst for oxidizing hydrogen and a support thereof. In addition, there is also disposed a water droplet deposition-preventing means for preventing deposition of water droplets in a reactor pressure vessel on the catalyst. Then, the effect of the catalyst upon catalytic oxidation reaction of hydrogen can be kept high. The local elevation of hydrogen concentration can be prevented even upon occurrence of such a phenomenon that various kinds of mobile forces in the container such as dry well cooling system are lost. (I.S.)

  13. Nuclear reactor

    International Nuclear Information System (INIS)

    Tilliette, Z.

    1975-01-01

    A description is given of a nuclear reactor and especially a high-temperature reactor in which provision is made within a pressure vessel for a main cavity containing the reactor core and a series of vertical cylindrical pods arranged in spaced relation around the main cavity and each adapted to communicate with the cavity through two collector ducts or headers for the primary fluid which flows downwards through the reactor core. Each pod contains two superposed steam-generator and circulator sets disposed in substantially symmetrical relation on each side of the hot primary-fluid header which conveys the primary fluid from the reactor cavity to the pod, the circulators of both sets being mounted respectively at the bottom and top ends of the pod

  14. Practical Eco-Design and Eco-Innovation of Consumer Electronics—the Case of Mobile Phones

    Directory of Open Access Journals (Sweden)

    Anders S. G. Andrae

    2016-02-01

    Full Text Available Annually, it is estimated that about 4 billion units of consumer electronics for mobile communications are produced worldwide. This could lead to various ecological imbalances unless the design and disposal of the products are handled optimally. To illustrate how industry looks at and responds to the increasing social awareness, this article describes how sustainability is successfully implemented in practice at a large Chinese company, developing and producing various kinds of electronic products used for communication. It also describes how a variety of eco-innovations and business models contribute to reducing the environmental impact; for example, through increased recovery and recycling. A new kind of eco-design procedure is presented along with a new methodology which shows how a mobile phone gradually becomes more sustainable from one generation to the next. The issues with and set-up of new eco-labeling schemes for mobile phones, eco-rating, is described in detail. The conclusion is that due to high competition between companies, the industry acts resourcefully and a lot is done to the save the ecological environment.

  15. On the Faces and Phases of Eco-innovation - on the Dynamics of the Greening of the Economy

    DEFF Research Database (Denmark)

    Andersen, Maj Munch

    2010-01-01

    that the concept of eco-innovation could represent the evolutionary economic analysis of the greening of industry and the economy. The paper seeks to contribute to the development of evolutionary eco-innovation theory starting with a fundamental discussion on defining eco-innovation. Hitherto eco-technologies...

  16. Investigational research on eco-smart engines; Eco-smart engine no chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper investigated the trend of research on eco-smart engines into which optimization function of engine performance, high environmental-adaptability, etc. are integrated. The investigation was made in Japan and abroad on technologies of combustion, structure/material, control, design/analysis, systematization, etc. In case of Japan, specifications were established for three types of engines, subsonic, supersonic and hypersonic aircraft, and the research subjects to fulfil the specifications were extracted. In case of the U.S. and Europe, the survey was made of combustion, materials, noise, design concept, control, etc. Important subjects are selected in priority order. Namely, for the enhancement of efficiency, the following were taken up: three-dimensional fiber-reinforced large-size light-weight structure application technology, heat-resistant advanced-material structure damage-tolerant design technology, pseudo-vesicular structure transpiration cooling technology, etc. For the reduction of NOx emission, the paper took up technologies of environmentally optimization combustion, AI combustion control, and non-cooling combustor liner application. For the noise reduction, technologies of new inclination hole orientation noise absorbing structure material application, super noise control, and innovative CFD utilization low noise aerodynamics. Moreover, the results of fiscal 1997 were outlined to indicate the research in the next fiscal year. 14 figs., 10 tabs.

  17. Reactor building

    International Nuclear Information System (INIS)

    Maruyama, Toru; Murata, Ritsuko.

    1996-01-01

    In the present invention, a spent fuel storage pool of a BWR type reactor is formed at an upper portion and enlarged in the size to effectively utilize the space of the building. Namely, a reactor chamber enhouses reactor facilities including a reactor pressure vessel and a reactor container, and further, a spent fuel storage pool is formed thereabove. A second spent fuel storage pool is formed above the auxiliary reactor chamber at the periphery of the reactor chamber. The spent fuel storage pool and the second spent fuel storage pool are disposed in adjacent with each other. A wall between both of them is formed vertically movable. With such a constitution, the storage amount for spent fuels is increased thereby enabling to store the entire spent fuels generated during operation period of the plant. Further, since requirement of the storage for the spent fuels is increased stepwisely during periodical exchange operation, it can be used for other usage during the period when the enlarged portion is not used. (I.S.)

  18. Reactor container

    International Nuclear Information System (INIS)

    Shibata, Satoru; Kawashima, Hiroaki

    1984-01-01

    Purpose: To optimize the temperature distribution of the reactor container so as to moderate the thermal stress distribution on the reactor wall of LMFBR type reactor. Constitution: A good heat conductor (made of Al or Cu) is appended on the outer side of the reactor container wall from below the liquid level to the lower face of a deck plate. Further, heat insulators are disposed to the outside of the good heat conductor. Furthermore, a gas-cooling duct is circumferentially disposed at the contact portion between the good heat conductor and the deck plate around the reactor container. This enables to flow the cold heat from the liquid metal rapidly through the good heat conductor to the cooling duct and allows to maintain the temperature distribution on the reactor wall substantially linear even with the abrupt temperature change in the liquid metal. Further, by appending the good heat conductor covered with inactive metals not only on the outer side but also on the inside of the reactor wall to introduce the heat near the liquid level to the upper portion and escape the same to the cooling layer below the roof slab, the effect can be improved further. (Ikeda, J.)

  19. Nuclear reactor

    International Nuclear Information System (INIS)

    Rau, P.

    1980-01-01

    The reactor core of nuclear reactors usually is composed of individual elongated fuel elements that may be vertically arranged and through which coolant flows in axial direction, preferably from bottom to top. With their lower end the fuel elements gear in an opening of a lower support grid forming part of the core structure. According to the invention a locking is provided there, part of which is a control element that is movable along the fuel element axis. The corresponding locking element is engaged behind a lateral projection in the opening of the support grid. The invention is particularly suitable for breeder or converter reactors. (orig.) [de

  20. Nuclear reactors

    International Nuclear Information System (INIS)

    Prescott, R.F.

    1976-01-01

    A nuclear reactor containment vessel faced internally with a metal liner is provided with thermal insulation for the liner, comprising one or more layers of compressible material such as ceramic fiber, such as would be conventional in an advanced gas-cooled reactor and also a superposed layer of ceramic bricks or tiles in combination with retention means therefor, the retention means (comprising studs projecting from the liner, and bolts or nuts in threaded engagement with the studs) being themselves insulated from the vessel interior so that the coolant temperatures achieved in a High-Temperature Reactor or a Fast Reactor can be tolerated with the vessel. The layer(s) of compressible material is held under a degree of compression either by the ceramic bricks or tiles themselves or by cover plates held on the studs, in which case the bricks or tiles are preferably bedded on a yielding layer (for example of carbon fibers) rather than directly on the cover plates

  1. Nuclear reactor

    International Nuclear Information System (INIS)

    Miyashita, Akio.

    1981-01-01

    Purpose: To facilitate and accelerate a leakage test of valves of a main steam pipe by adding a leakage test partition valve thereto. Constitution: A leakage testing partition valve is provided between a pressure vessel for a nuclear reactor and the most upstream side valve of a plurality of valves to be tested for leakage, a testing branch pipe is communicated with the downstream side of the partition valve, and the testing water for preventing leakage is introduced thereto through the branch pipe. Since main steam pipe can be simply isolated by closing the partition valve in the leakage test, the leakage test can be conducted without raising or lowering the water level in the pressure vessel, and since interference with other work in the reactor can be eliminated, the leakage test can be readily conducted parallel with other work in the reactor in a short time. Clean water can be used without using reactor water as the test water. (Yoshihara, H.)

  2. Reactor container

    International Nuclear Information System (INIS)

    Abe, Yoshihito; Sano, Tamotsu; Ueda, Sabuo; Tanaka, Kazuhisa.

    1987-01-01

    Purpose: To improve the liquid surface disturbance in LMFBR type reactors. Constitution: A horizontal flow suppressing mechanism mainly comprising vertical members is suspended near the free liquid surface of coolants in the upper plenum. The horizontal flow of coolants near the free liquid surface is reduced by the suppressing mechanism to effectively reduce the surface disturbance. The reduction in the liquid surface disturbance further prevails to the entire surface region with no particular vertical variations to the free liquid surface to remarkably improve the preventive performance for the liquid surface disturbance. Accordingly, it is also possible to attain the advantageous effects such as prevention for the thermal fatigue in reactor vessel walls, reactor upper mechanisms, etc. and prevention of burning damage to the reactor core due to the reduction of envolved Ar gas. (Kamimura, M.)

  3. REACTOR SHIELD

    Science.gov (United States)

    Wigner, E.P.; Ohlinger, L.E.; Young, G.J.; Weinberg, A.M.

    1959-02-17

    Radiation shield construction is described for a nuclear reactor. The shield is comprised of a plurality of steel plates arranged in parallel spaced relationship within a peripheral shell. Reactor coolant inlet tubes extend at right angles through the plates and baffles are arranged between the plates at right angles thereto and extend between the tubes to create a series of zigzag channels between the plates for the circulation of coolant fluid through the shield. The shield may be divided into two main sections; an inner section adjacent the reactor container and an outer section spaced therefrom. Coolant through the first section may be circulated at a faster rate than coolant circulated through the outer section since the area closest to the reactor container is at a higher temperature and is more radioactive. The two sections may have separate cooling systems to prevent the coolant in the outer section from mixing with the more contaminated coolant in the inner section.

  4. NUCLEAR REACTOR

    Science.gov (United States)

    Miller, H.I.; Smith, R.C.

    1958-01-21

    This patent relates to nuclear reactors of the type which use a liquid fuel, such as a solution of uranyl sulfate in ordinary water which acts as the moderator. The reactor is comprised of a spherical vessel having a diameter of about 12 inches substantially surrounded by a reflector of beryllium oxide. Conventionnl control rods and safety rods are operated in slots in the reflector outside the vessel to control the operation of the reactor. An additional means for increasing the safety factor of the reactor by raising the ratio of delayed neutrons to prompt neutrons, is provided and consists of a soluble sulfate salt of beryllium dissolved in the liquid fuel in the proper proportion to obtain the result desired.

  5. Breeder reactors

    International Nuclear Information System (INIS)

    Gollion, H.

    1977-01-01

    The reasons for the development of fast reactors are briefly reviewed (a propitious neutron balance oriented towards a maximum uranium burnup) and its special requirements (cooling, fissile material density and reprocessing) discussed. The three stages in the French program of fast reactor development are outlined with Rapsodie at Cadarache, Phenix at Marcoule, and Super Phenix at Creys-Malville. The more specific features of the program of research and development are emphasized: kinetics and the core, the fuel and the components [fr

  6. Nuclear reactor

    International Nuclear Information System (INIS)

    Schulze, I.; Gutscher, E.

    1980-01-01

    The core contains a critical mass of UN or U 2 N 3 in the form of a noncritical solution with melted Sn being kept below a N atmosphere. The lining of the reactor core consists of graphite. If fission progresses part of the melted metal solution is removed and cleaned from fission products. The reactor temperatures lie in the range of 300 to 2000 0 C. (Examples and tables). (RW) [de

  7. Reactor technology

    International Nuclear Information System (INIS)

    Erdoes, P.

    1977-01-01

    This is one of a series of articles discussing aspects of nuclear engineering ranging from a survey of various reactor types for static and mobile use to mention of atomic thermo-electric batteries of atomic thermo-electric batteries for cardiac pacemakers. Various statistics are presented on power generation in Europe and U.S.A. and economics are discussed in some detail. Molten salt reactors and research machines are also described. (G.M.E.)

  8. Combined analyses of costs, market value and eco-costs in circular business models : eco-efficient value creation in remanufacturing

    NARCIS (Netherlands)

    Vogtländer, J.G.; Scheepens, A.E.; Bocken, N.M.P.; Peck, D.P.

    2017-01-01

    Eco-efficient Value Creation is a method to analyse innovative product and service design together with circular business strategies. The method is based on combined analyses of the costs, market value (perceived customer value) and eco-costs. This provides a prevention-based single indicator for

  9. From an eco-fairy tale to an environmentally friendly lifestyle. An eco-friendly reading project by Agnieszka Marzęcka

    Directory of Open Access Journals (Sweden)

    Anna Kapusta

    2012-06-01

    Full Text Available The article is concerning on the eco-critical literary phenomenon on the perspective of new species polish eco-fairy tale. The fabulous tale about ecological style of life (The metaphorical ecology of human biography was ilustrated by the Agnieszka Marzęcka's modernity tune entitled The Victory of King of Cleanness.

  10. Reactor containment

    International Nuclear Information System (INIS)

    Kawabe, Ryuhei; Yamaki, Rika.

    1990-01-01

    A water vessel is disposed and the gas phase portion of the water vessel is connected to a reactor container by a pipeline having a valve disposed at the midway thereof. A pipe in communication with external air is extended upwardly from the liquid phase portion to a considerable height so as to resist against the back pressure by a waterhead in the pipeline. Accordingly, when the pressure in the container is reduced to a negative level, air passes through the pipeline and uprises through the liquid phase portion in the water vessel in the form of bubbles and then flows into the reactor container. When the pressure inside of the reactor goes higher, since the liquid surface in the water vessel is forced down, water is pushed up into the pipeline. Since the waterhead pressure of a column of water in the pipeline and the pressure of the reactor container are well-balanced, gases in the reactor container are not leaked to the outside. Further, in a case if a great positive pressure is formed in the reactor container, the inner pressure overcomes the waterhead of the column of water, so that the gases containing radioactive aerosol uprise in the pipeline. Since water and the gases flow being in contact with each other, this can provide the effect of removing aerosol. (T.M.)

  11. Fast reactors

    International Nuclear Information System (INIS)

    Vasile, A.

    2001-01-01

    Fast reactors have capacities to spare uranium natural resources by their breeding property and to propose solutions to the management of radioactive wastes by limiting the inventory of heavy nuclei. This article highlights the role that fast reactors could play for reducing the radiotoxicity of wastes. The conversion of 238 U into 239 Pu by neutron capture is more efficient in fast reactors than in light water reactors. In fast reactors multi-recycling of U + Pu leads to fissioning up to 95% of the initial fuel ( 238 U + 235 U). 2 strategies have been studied to burn actinides: - the multi-recycling of heavy nuclei is made inside the fuel element (homogeneous option); - the unique recycling is made in special irradiation targets placed inside the core or at its surroundings (heterogeneous option). Simulations have shown that, for the same amount of energy produced (400 TWhe), the mass of transuranium elements (Pu + Np + Am + Cm) sent to waste disposal is 60,9 Kg in the homogeneous option and 204.4 Kg in the heterogeneous option. Experimental programs are carried out in Phenix and BOR60 reactors in order to study the feasibility of such strategies. (A.C.)

  12. Eco-efficiency assessment of dairy wastewater reuse

    DEFF Research Database (Denmark)

    Rygaard, Martin; Skrydstrup, Julie; Larsen, Sille Lyster

    . To evaluate the eco-efficiency of new technologies we have developed a method that aligns assessment of environmental impacts and value creation within a life-cycle boundary of a food processing industry. Using standard life-cycle assessment and the concept of value added we have demonstrated the method......, but it comes at the cost of decreased value creation when considering the entire value chain. The applied eco-efficiency method showed the benefits and drawbacks of implementing a new technology for all involved stakeholders and the concept of value added resonates well with the commercial actors involved...... supply and wastewater management can limit the production capacity of an industrial facility, when local water resources are under stress or wastewater treatment capacity is limited. In such situations, the industry will seek to increase its water efficiency through implementation of new technology...

  13. Glass fiber effect on mechanical properties of Eco-SCC

    Science.gov (United States)

    Prasad M. L., V.; Loksesh, G.; Ramanjaneyulu, B.; Venkatesh, S.; Mousumi, K.

    2017-07-01

    Sustainable Construction encouraging the use of recycled materials and implies adoption of fewer natural resources in buildings and other infrastructure. In this paper Quarry Dust (QD) is used as partial replacement for River Sand (RS) to make Self Compacting Concrete (SCC) of grade M40. Glass fiber is used as strengthening material to the developed concrete. The present study mainly focused to develop Eco-SCC using QD. In this study it was found that, for developing Eco-SCC, what is the optimum dosage of replacement of QD in RS. Fresh properties of SCC are satisfying the EFNARC specifications and also target strength is achieved. Further it is concluded that, with the glass fiber addition there is an improvement in the split and flexural strength values.

  14. Self-regulated dynamical criticality in human ECoG

    Directory of Open Access Journals (Sweden)

    Guillermo eSolovey

    2012-07-01

    Full Text Available Mounting experimental and theoretical results indicate that neural systems are poised near a critical state. In human subjects, however, most evidence comes from functional MRI studies, an indirect measurement of neuronal activity with poor temporal resolution. Electrocorticography (ECoG provides a unique window into human brain activity: each electrode records, with high temporal resolution, the activity resulting from the sum of the local field potentials of sim 10^5 neurons. We show that the human brain ECoG recordings display features of self-regulated dynamical criticality: dynamical modes of activation drift around the critical stability threshold, moving in and out of the unstable region and equilibrating the global dynamical state at a very fast time scale. Moreover, the analysis also reveals differences between the resting state and a motor task, associated with increased stability of a fraction of the dynamical modes.

  15. Eco-analytical Methodology in Environmental Problems Monitoring

    Science.gov (United States)

    Agienko, M. I.; Bondareva, E. P.; Chistyakova, G. V.; Zhironkina, O. V.; Kalinina, O. I.

    2017-01-01

    Among the problems common to all mankind, which solutions influence the prospects of civilization, the problem of ecological situation monitoring takes very important place. Solution of this problem requires specific methodology based on eco-analytical comprehension of global issues. Eco-analytical methodology should help searching for the optimum balance between environmental problems and accelerating scientific and technical progress. The fact that Governments, corporations, scientists and nations focus on the production and consumption of material goods cause great damage to environment. As a result, the activity of environmentalists is developing quite spontaneously, as a complement to productive activities. Therefore, the challenge posed by the environmental problems for the science is the formation of geo-analytical reasoning and the monitoring of global problems common for the whole humanity. So it is expected to find the optimal trajectory of industrial development to prevent irreversible problems in the biosphere that could stop progress of civilization.

  16. [Assessment of eco-environmental vulnerability of Hainan Island, China].

    Science.gov (United States)

    Huang, Bao-rong; Ouyang, Zhi-yun; Zhang, Hui-zhi; Zhang, Li-hua; Zheng, Hua

    2009-03-01

    Based on the assessment method of environmental vulnerability constructed by SOPAC and UNEP, this paper constructed an indicator system from three sub-themes including hazard, resistance, and damage to assess the eco-environmental vulnerability of Hainan Island. The results showed that Hainan Island was suffering a middling level eco-environmental hazard, and the main hazards came from some intensive human activities such as intensive agriculture, mass tourism, mining, and a mass of solid wastes thrown by islanders and tourists. Some geographical characters such as larger land area, larger altitude range, integrated geographical form, and abundant habitat types endowed Hainan Island higher resistance to environmental hazards. However, disturbed by historical accumulative artificial and natural hazards, the Island ecosystem had showed serious ecological damage, such as soil degradation and biodiversity loss. Comprehensively considered hazard, resistance, damage, and degradation, the comprehensive environmental vulnerability of the Island was at a middling level. Some indicators showed lower vulnerability, but some showed higher vulnerability.

  17. MODEL OF SPATIAL EVALUATION FOR TOURISM ECO-RENT

    Directory of Open Access Journals (Sweden)

    Maja Fredotović

    2011-02-01

    Full Text Available Tourism is extremely interacted with the environment. Taking into account that tourism uses the space and related resources, it seems right to pay for the damages caused to the environment. This is the basis of the tourist spatial eco rent. The paper evaluates the space and resources used by tourism as the basis for the introduction of the tourism eco-rent in the area of Makarska Riviera, a traditional tourism destination. It is divided into three main spatial units: urban areas, bathing zone (beaches, Biokovo Park of Nature. According to natural and geographical reasoning, a number of zones with different spatial values within each spatial unit has been identified. Each unit, i.e. zone was evaluated according to various criteria relevant to the evaluation of space for tourism and tourism development purposes. Having ranked zones within each unit, using the multiriteria ranking method PROMETHEE II, comparative analysis of the obtained results was carried out as well.

  18. Marketing eco-power - still lots to be done

    International Nuclear Information System (INIS)

    Baettig, I.

    2005-01-01

    This article takes a look at the various eco-power offers that can currently be found on the Swiss electricity market. Various electricity utilities offer ecologically produced power in various qualities under several different names. These range from pure solar power through to various mixes of solar, wind and hydro power. The varying marketing approaches used are discussed. Local utilities have the most success in selling eco-power, whereas a large Swiss supermarket chain had difficulty selling its customers certificates for renewable electricity. This, according to the chain's speaker, was due to the difficulty of explaining the relationship between production certificates and the actual power drawn from the wall socket. The offers of various utilities and independent power producers are looked at and discussed with those responsible

  19. THE ROLE OF ECO-INNOVATION IN THE ENERGY

    Directory of Open Access Journals (Sweden)

    Aleksandra Kokić Arsić

    2009-09-01

    Full Text Available The immediate effect of energy consumption on environment quality is its deterioration. Gas and dust emissions, as products of coal, mazut (heavy fuel oil or natural gas combustion, continually pollute the atmosphere and have a global effect on climate changes, ozone damage, acid rains, disappearing of sensitive ecosystems, etc. This, directly or indirectly, brings about pollution of soil and fresh water, since energy life cycle begins with mines, oil and gas deposits, and ends with mechanical operations, heating and cooling with the restoration of thermal energy back into the atmosphere. In order to anticipate these negative processes, it is necessary to conduct an array of eco innovations in the entire life cycle of final energy. What this paper will show, on the example of communally-industrial energetics, is methodology of research and realization of eco innovations, as well as assessment of effects on improvement of energetic efficiency, quality of the environment and human life.

  20. Eco taxes and double dividend. A co-integration analysis

    International Nuclear Information System (INIS)

    Ghignoni, E.

    1999-01-01

    The paper tackles with the critical discussion of the eco tax double dividend theory. It is built up a theoretical and empirical analysis on short and long run effects of changes in real prices of energetic inputs on the use of polluted sources and labour, as well as on short and long run effects of changes in real labour cost on the use of labour and energy. At that purpose Johansen's procedure allows to get a structural multivariate model of dynamic relationships among the variables enclosed in the data set of a production function with labour and energy. This model is submitted to a dynamic simulation and results suggest that the introduction of an eco tax coupled with a decreasing in real labour cost would have uncertain and not leasing effects on the reduction of pollution coming from the utilisation of energetic sources and very limited effects on employment [it

  1. Advanced scoring method of eco-efficiency in European cities.

    Science.gov (United States)

    Moutinho, Victor; Madaleno, Mara; Robaina, Margarita; Villar, José

    2018-01-01

    This paper analyzes a set of selected German and French cities' performance in terms of the relative behavior of their eco-efficiencies, computed as the ratio of their gross domestic product (GDP) over their CO 2 emissions. For this analysis, eco-efficiency scores of the selected cities are computed using the data envelopment analysis (DEA) technique, taking the eco-efficiencies as outputs, and the inputs being the energy consumption, the population density, the labor productivity, the resource productivity, and the patents per inhabitant. Once DEA results are analyzed, the Malmquist productivity indexes (MPI) are used to assess the time evolution of the technical efficiency, technological efficiency, and productivity of the cities over the window periods 2000 to 2005 and 2005 to 2008. Some of the main conclusions are that (1) most of the analyzed cities seem to have suboptimal scales, being one of the causes of their inefficiency; (2) there is evidence that high GDP over CO 2 emissions does not imply high eco-efficiency scores, meaning that DEA like approaches are useful to complement more simplistic ranking procedures, pointing out potential inefficiencies at the input levels; (3) efficiencies performed worse during the period 2000-2005 than during the period 2005-2008, suggesting the possibility of corrective actions taken during or at the end of the first period but impacting only on the second period, probably due to an increasing environmental awareness of policymakers and governors; and (4) MPI analysis shows a positive technological evolution of all cities, according to the general technological evolution of the reference cities, reflecting a generalized convergence of most cities to their technological frontier and therefore an evolution in the right direction.

  2. ShopGirls Shine in Eco-Marathon

    Science.gov (United States)

    Stowell, Shante

    2011-01-01

    The ShopGirls of Granite Falls (WA) High School are the first-ever all-female team to successfully design, build, and race a prototype diesel car in the Shell Eco-marathon. The team took first place in the diesel fuel-efficiency category with a vehicle that achieved 470 miles per gallon! The idea for the ShopGirls came when Vervia Gabriel, career…

  3. ECOS: values of parameters to be used for domestic animals

    International Nuclear Information System (INIS)

    Thorne, M.C.

    1984-03-01

    This report constitutes the database description for the domestic animals section of the biosphere code ECOS. Two categories of data are supplied, element-independent and element-dependent. The element-independent data comprise rates of food, water and soil consumption, inhalation rates and masses of animal tissues. The element-dependent data consist of f 1 (fractional gastrointestinal absorption), fsub(D) (fractional systematic deposition after inhalation) and NRF (weighted integrated retention function) values. All parameter values given are justified. (author)

  4. Design of Eco-Smart Homes For Elderly Independent Living

    OpenAIRE

    Zhang, Yiran; Liu, Xiaohui

    2015-01-01

    The aging of the world population has increased dramatically during the past century. The rapid increase of elderly population is putting a heavy strain on healthcare and social welfare. Living conditions and service provision for elderly people have thus become an increasingly hot topic worldwide. In this paper, we address this problem by presenting a conceptual model of an integrated and personalized system for an eco-smart home for elderly independent living. This approach was inspired by ...

  5. M-Eco enhanced Adaptation Service (D5.2)

    DEFF Research Database (Denmark)

    Dolog, Peter; Durao, Frederico; Lage, Ricardo Gomes

    2012-01-01

    In this report, we present the improvements of the Adaptive Tuning and Personalization (WP5) component of the M-Eco system. This component is focused on four main areas of interest to users of surveillance systems: presentation options for recommendation and adaptation, user and group models, use...... interests. The main contributions of the report are spatial reasoning methods evaluated in group recommendations, personalized tag clouds, and web services integration....

  6. The status of blood safety in ECO member states

    Science.gov (United States)

    Seighali, Fariba; Hosseini Divkolaye, Nasim S.; Koohi, Ebrahim; Pourfathollah, Ali A.; Rahmani, Ahmad M.

    2015-01-01

    Background Access to the information concerning blood safety is essential for managing problems and overcoming the challenges that are faced in any given region. Information on the availability and safety of blood in countries of the Economic Cooperation Organisation (ECO) is largely lacking. To address this problem, the Iranian Blood Transfusion Organisation, in collaboration with other ECO member states, initiated a research project in 2009 to collect, analyse and compare statistics on blood safety in the region. Materials and methods A modified and summarised version of the Global Database on Blood Safety (GDBS) questionnaire was used to collect data. The questionnaire was sent to all ten countries in the ECO region. The heads of the national transfusion services or focal points were requested to complete the form. Related literature and websites were also reviewed. Results Only three countries (Afghanistan, Iran and Turkey) completed the questionnaire, while other countries provided their available data on some parts of the questionnaire. The number of donations per year varied from 5 to 27/1,000 population. The rate of donors positive for human immunodeficiency virus ranged from 0.003% to 0.2%. The rate of donors positive for hepatitis C virus antibody varied from 0.05% to 3.9% while that of hepatitis B virus surface antigen ranged from 0.15% to 3.91% respectively. Discussion There is very clear diversity in blood transfusion services among ECO member states. Most countries in the region do not have a data-recording system. It is generally estimated that the need for blood is much higher than the supply in this region. Deficiencies in donor screening and a high prevalence of transfusion-transmitted infections are other important challenges. PMID:26192779

  7. The reality of fiction: the ECO by Mathias Goeritz

    Directory of Open Access Journals (Sweden)

    Fernando Quesada

    2016-05-01

    Full Text Available Abstract This article covers the full biography of a building, the Experimental Museum El Eco, designed by Germanborn and Mexican émigré artist and architect Mathias Goeritz. It provides an approach intersecting the biography of the author, the history of the building, and prominent  individuals of the two cultural traditions, German and Mexican, who  participated in the creation of a very special and unique building: El Eco. On the one hand, the ethics of Expressionism, the interest in  non-European art, the cult of primitivism and the aesthetic system of the  pair of concepts abstraction-empathy, all stemming from German culture. On the other, the pantheistic religiosity of landscape, zoomorphism and anthropomorphism, the interest in masks, and the aesthetics of  monumental scale, stemming from pre-Cortesian Mexican culture. Taking  the stance of intertwining Mathias Goeritz parcours with those of individuals and issues from his German past and his Mexican future – highlighting the figures of Wilhelm Worringer, Paul Westheim, Luis Barragán, Edmundo O'Gorman, and Ida Rodríguez Prampolini – this article proposes a return  trip from fiction to reality, following in the footsteps of the author and  comparing them with the pathway of the very building El Eco.

  8. On eco-efficient technologies to minimize industrial water consumption

    Science.gov (United States)

    Amiri, Mohammad C.; Mohammadifard, Hossein; Ghaffari, Ghasem

    2016-07-01

    Purpose - Water scarcity will further stress on available water systems and decrease the security of water in many areas. Therefore, innovative methods to minimize industrial water usage and waste production are of paramount importance in the process of extending fresh water resources and happen to be the main life support systems in many arid regions of the world. This paper demonstrates that there are good opportunities for many industries to save water and decrease waste water in softening process by substituting traditional with echo-friendly methods. The patented puffing method is an eco-efficient and viable technology for water saving and waste reduction in lime softening process. Design/methodology/approach - Lime softening process (LSP) is a very sensitive process to chemical reactions. In addition, optimal monitoring not only results in minimizing sludge that must be disposed of but also it reduces the operating costs of water conditioning. Weakness of the current (regular) control of LSP based on chemical analysis has been demonstrated experimentally and compared with the eco-efficient puffing method. Findings - This paper demonstrates that there is a good opportunity for many industries to save water and decrease waste water in softening process by substituting traditional method with puffing method, a patented eco-efficient technology. Originality/value - Details of the required innovative works to minimize industrial water usage and waste production are outlined in this paper. Employing the novel puffing method for monitoring of lime softening process results in saving a considerable amount of water while reducing chemical sludge.

  9. The Eco-Efficiency and Sustainable National Projects in Egypt

    Directory of Open Access Journals (Sweden)

    Khaled Gaber EL Sakty

    2015-08-01

    Full Text Available As national mega projects, the Suez Canal Area Development Project and New Suez Canal have logistically imposed two main questions. First, how the project can spot the preferred solution for balancing the business and environmental concerns? Second, how the project can enhance the trade-off between those two dimensions. In order to answer these two questions, the efficient frontier between the profitability and the environmental impact needs to be investigated. Three Levels of Thinking has to be applied. In Marlog 2, the Operational Thinking has been discussed using different supply chain approaches including SCOR and Lean Thinking. In Marlog 3, the Tactical Thinking has been explained for global growth opportunities including thinking process and value chain philosophy. This year, the Strategic Thinking approach will be discussed for improving the Eco-efficiency in logistics clusters with the application for the Suez Canal Logistics Corridor project.  The main purpose of this paper is to explore the eco-efficiency solution and the concept of eco-topology for the national mega project to transfer the Suez Canal region into a global logistics corridor.

  10. ACT NOW: Kindergarten children, eco citizens at its best - Pilot project in Algeria : Green Buds (Eco Bourgeons); AGIR MAINTENANT : Les enfants de la maternelle, eco citoyens par excellence -- Projet pilote en Algerie : Eco Bourgeons

    Energy Technology Data Exchange (ETDEWEB)

    Zahid, Fatima Djalila; Stambouli, Amine Boudghene; Youcef, Reda Dali

    2010-09-15

    Based on originality, reproducibility, impact, duration and consistence of action, the Green Buds pilot program (Eco Bourgeons) in Algeria under the wings of the 'El Baraim' association has for slogan: 'Consume adequately, live better' ('Consommons juste, vivons mieux'). The long term objective: Introduce the ED as a subject in the national education program. [French] Inculquer des eco gestes a 672 enfants de la maternelle dans le sens de la ME a travers un programme educatif riche et adequat, c'est eduquer nos futurs citoyens (industriels, dirigeants, etc.) au respect de nos ressources energetiques et de l'environnement. Se basant sur les criteres de l'originalite, la reproductibilite, l'impact, la duree et la ''consistance'' de l'action, le projet 'Eco Bourgeons' pilote en Algerie sous tutelle de l'association 'El Baraim' a pour slogan : 'Consommons juste, vivons mieux'. L'objectif a long terme: Introduire la ME comme matiere dans le Programme de l'Education Nationale.

  11. Certifying the commons: eco-certification, privatization, and collective action

    Directory of Open Access Journals (Sweden)

    Paul Foley

    2014-06-01

    Full Text Available We examine new dynamics of privatization and collective action in common pool resource situations facilitated by the nonstate multistakeholder institutions of the Marine Stewardship Council (MSC, the global leader in sustainability certification for wild caught seafood. Through a review of the literature and two case studies of fishing cooperatives in Baja California Sur, Mexico and on Fogo Island in the Canadian Province of Newfoundland and Labrador (NL, we advance two interrelated arguments. First, certification and eco-labeling institutions privatize fisheries governance in largely unexamined ways through the injection of new forms of exclusive rights or privileges into common pool resource situations already complicated by access and property privileges, creating conditions for confusion and conflict as well as cooperation. Second, the MSC whole stock definition of sustainability places greater demands on certification clients for engaging in collective action by encouraging coordination over all social extractions from targeted fish stocks. Although rules encouraging collective action in common pool situations militate against the narrow private capture of certificate and eco-label rights, they also undermine the ability of small-scale and community-based fisheries that are embedded in larger unhealthy fishery contexts to acquire the right to the MSC stamp of sustainability. We conclude that MSC certification and eco-labeling create new institutions of private property rights and collective action, which can result in exclusionary practices, inclusionary collective action, or both. Much will depend on the specific common pool context and history of the fishery.

  12. Eco-Anthropic Compatibility - a Multidisciplinary Model in Urban Ecology

    Directory of Open Access Journals (Sweden)

    MARIANO L. BIANCA

    2010-01-01

    Full Text Available In this paper I propose a multidisciplinary model of urban development which goes beyond the notion of ecological sustainability, by building on the concept of eco-anthropic compatibility. First of all I will sketch the historical development of human aggregations and I will underline the difference between ancient and modern aggregations. On the basis of this analysis, I will take into consideration the notion of sustainability and its possible application to present conurbations. I will underline several limits of the notion of sustainable development and I will propose a multidisciplinary model grounded on a broader and new notion: the eco-anthropic compatibility. Using this notion, which includes the idea of sustainability, it is possible to handle, within the model, the human factors and human living conditions inside an urban aggregation. Finally, I will state that the actual urban model is decaying and therefore, sooner or later, we will have to face the end of urban civilization; for this reason we can start imagining new future ways for human aggregations on the planet based on the notion of eco-anthropic compatibility.

  13. Generation IV reactors: reactor concepts

    International Nuclear Information System (INIS)

    Cardonnier, J.L.; Dumaz, P.; Antoni, O.; Arnoux, P.; Bergeron, A.; Renault, C.; Rimpault, G.; Delpech, M.; Garnier, J.C.; Anzieu, P.; Francois, G.; Lecomte, M.

    2003-01-01

    Liquid metal reactor concept looks promising because of its hard neutron spectrum. Sodium reactors benefit a large feedback experience in Japan and in France. Lead reactors have serious assets concerning safety but they require a great effort in technological research to overcome the corrosion issue and they lack a leader country to develop this innovative technology. In molten salt reactor concept, salt is both the nuclear fuel and the coolant fluid. The high exit temperature of the primary salt (700 Celsius degrees) allows a high energy efficiency (44%). Furthermore molten salts have interesting specificities concerning the transmutation of actinides: they are almost insensitive to irradiation damage, some salts can dissolve large quantities of actinides and they are compatible with most reprocessing processes based on pyro-chemistry. Supercritical water reactor concept is based on operating temperature and pressure conditions that infers water to be beyond its critical point. In this range water gets some useful characteristics: - boiling crisis is no more possible because liquid and vapour phase can not coexist, - a high heat transfer coefficient due to the low thermal conductivity of supercritical water, and - a high global energy efficiency due to the high temperature of water. Gas-cooled fast reactors combining hard neutron spectrum and closed fuel cycle open the way to a high valorization of natural uranium while minimizing ultimate radioactive wastes and proliferation risks. Very high temperature gas-cooled reactor concept is developed in the prospect of producing hydrogen from no-fossil fuels in large scale. This use implies a reactor producing helium over 1000 Celsius degrees. (A.C.)

  14. Research reactors - an overview

    International Nuclear Information System (INIS)

    West, C.D.

    1997-01-01

    A broad overview of different types of research and type reactors is provided in this paper. Reactor designs and operating conditions are briefly described for four reactors. The reactor types described include swimming pool reactors, the High Flux Isotope Reactor, the Mark I TRIGA reactor, and the Advanced Neutron Source reactor. Emphasis in the descriptions is placed on safety-related features of the reactors. 7 refs., 7 figs., 2 tabs

  15. Combining eco-efficiency and eco-effectiveness for continuous loop beverage packaging systems: learnings from the Carlsberg Circular Community

    DEFF Research Database (Denmark)

    Niero, Monia; Hauschild, Michael Zwicky; Hoffmeyer, Simon Boas

    2017-01-01

    Eco-efficiency (i.e., increasing value while reducing resource use and pollution) can with advantage be combined with eco-effectiveness (i.e., maximizing the benefits to ecological and economical systems) to address the challenges posed by the circular economy in the design of circular industrial......, the environmentally optimal beverage packaging life cycle scenario is identified, both in terms of defined use and reuse. Second, the limiting factors are identified for the continuous use of materials in multiple loops, meeting the two requirements in the C2C certification process that address the material level (i...... the most efficient and effective "upcycling" strategy for the beverage packaging, both from an environmental and an economic point of view. In the case of the aluminum cans, the main recommendation from both the LCA and C2C perspective is to ensure a system that enables can-to-can recycling....

  16. Eco-anthropological Considerations on Terroir Reflexiones desde la eco-antropología sobre el terroir

    Directory of Open Access Journals (Sweden)

    Frédéric Duhart

    2011-01-01

    Full Text Available Terroir currently constitutes a key concept in the thought about the production of quality foods and drinks. In this text, we consider this notion from an eco-anthropological point of view, relying on examples taken from the past and present of certain wines. We successively study the construction of this notion, its uses (especially in the framework of denomination of origin processes and its representations.El Terroir constituye en la actualidad un concepto clave en el pensamiento sobre la producción de alimentos y de bebidas de calidad. En este texto, consideramos esta noción con un punto de vista eco-antropológico apoyándonos sobre ejemplos sacados principalmente de la historia y de la actualidad de ciertos vinos. Estudiamos sucesivamente su construcción, sus usos (en particular en el marco de los procesos de denominación de origen y sus representaciones.

  17. The Silicon Valley Eco System. High-energetic in many ways; Het Silicon Valley Eco Systeem: hoogenergetisch in vele opzichten

    Energy Technology Data Exchange (ETDEWEB)

    Van den Heuvel, J.

    2012-04-15

    The highly commended Silicon Valley Eco System is bubbling with energy with regard to the subjects that are focused upon, including sustainable energy, or the widely available expertise that is needed for the developments, good ideas, capital and optimism, fed by frequent examples of extraordinarily successful companies. The sheer endlessness of network opportunities joins all these elements frequently. This article addresses several noteworthy interactions in the field of sustainable energy over the last period. [Dutch] Het veel geroemde Silicon Valley eco systeem bruist van energie in de vorm van de onderwerpen waar men zich op richt, waaronder duurzame energie, of de ruim aanwezige expertise die nodig is voor de ontwikkelingen, goede ideeen, kapitaal, en optimisme, gevoed door regelmatige voorbeelden van buitensporig succesvolle bedrijven. De schier oneindige netwerkmogelijkheden brengen al deze elementen met grote regelmaat bij elkaar. In dit artikel volgen enkele vermeldenswaardige interacties op het vlak van duurzame energie uit de afgelopen periode.

  18. Analisa Perbedaan Eco-friendly Attitude Dan Eco-friendly Intention Antara Turis Lokal Dan Turis Asing Terhadap Green

    OpenAIRE

    Jokom, Regina; Kristanti, Monika

    2014-01-01

    The increasing concern for environmental degradation caused many people to pay more attention to the green practice in the industry including hotel. Majority of hotel chains have adopted environmental programs and labeled as green hotel. This study examines the significant differences between local tourist and foreign tourist regarding ecofriendly attitude and eco-friendly intention toward green hotel. Questionnaires were distributed to 120 localtourists and 120 foreign tourists In Juanda...

  19. The EcoCyc database: reflecting new knowledge about Escherichia coli K-12.

    Science.gov (United States)

    Keseler, Ingrid M; Mackie, Amanda; Santos-Zavaleta, Alberto; Billington, Richard; Bonavides-Martínez, César; Caspi, Ron; Fulcher, Carol; Gama-Castro, Socorro; Kothari, Anamika; Krummenacker, Markus; Latendresse, Mario; Muñiz-Rascado, Luis; Ong, Quang; Paley, Suzanne; Peralta-Gil, Martin; Subhraveti, Pallavi; Velázquez-Ramírez, David A; Weaver, Daniel; Collado-Vides, Julio; Paulsen, Ian; Karp, Peter D

    2017-01-04

    EcoCyc (EcoCyc.org) is a freely accessible, comprehensive database that collects and summarizes experimental data for Escherichia coli K-12, the best-studied bacterial model organism. New experimental discoveries about gene products, their function and regulation, new metabolic pathways, enzymes and cofactors are regularly added to EcoCyc. New SmartTable tools allow users to browse collections of related EcoCyc content. SmartTables can also serve as repositories for user- or curator-generated lists. EcoCyc now supports running and modifying E. coli metabolic models directly on the EcoCyc website. © The Author(s) 2016. Published by Oxford University Press on behalf of Nucleic Acids Research.

  20. The innovative application studty on eco-packaging design and materials

    OpenAIRE

    Cui Yong Min; Ren Xin Guang

    2016-01-01

    The paper solves the increasingly deteriorate environmental problems by positively exploring how to utilize and develop eco-packaging design reasonably. The paper explores an effective method that combines eco-packaging and environmental protection materials, hoping to define the sustainable development road of packaging design. The paper is centered on the design application of eco-packaging and environmental protection materials, applies and analyzes the method to obtain innovative design r...

  1. Eco-efficiency analysis methodology on the example of the chosen polyolefins production

    OpenAIRE

    K. Czaplicka-Kolarz; D. Burchart-Korol; P. Krawczyk

    2010-01-01

    the chosen polyolefins production. The article presents also main tools of eco-efficiency analysis: Life Cycle Assessment (LCA) and Net Present Value (NPV).Design/methodology/approach: On the basis of LCA and NPV of high density polyethylene (HDPE) and low density polyethylene (LDPE) production, eco-efficiency analysis is conducted.Findings: In this article environmental and economic performance of the chosen polyolefins production was presented. The basis phases of eco-efficiency methodology...

  2. Eco-Innovation for Sustainability: Evidence from 49 Countries in Asia and Europe

    Directory of Open Access Journals (Sweden)

    Jang-Hwan Jo

    2015-12-01

    Full Text Available Following the trend on focusing on a nation’s economic-growth, side effects such as resource exhaustion, environmental pollution, and social injustice have begun to appear. As a solution, eco-innovation has received a great amount of attention from European countries and as a result, many efforts to analyze the development of eco-innovation quantitatively have been made. This study aims to evaluate the validity of an eco-innovation index developed to support the sustainable development goal. For this purpose, four factors of eco-innovation—capacity, supportive environment, activity, and performance—were applied to three categories of the Triple-Bottom-Line (TBL concept in sustainability to compare the eco-innovation development level of 49 Asia-Europe Meeting countries. Factors for eco-innovation and TBL at the country level were organized in quartile and compared to see strength and weaknesses for each nation. In order to test if eco-innovation factors of a nation adequately reflect its sustainability, we used various comparisons of ANOVA. The results of this study are as follows: First, the one-way ANOVA tests present the scores for capacity, supportive environment, and performance as grouped into four quartiles in the same pattern as their economic, social, and environmental scores. The three-way ANOVA tests showed significance for the economic category. Scores for capacity, supportive environment, activity and performance were significant at a nation’s economic level. Lastly, the MANOVA test revealed that TBL significantly explains four eco-innovation factors. In addition, the eco-innovation performance level of European nations and Asian nations were compared. The possibility that many nations still have room to be competitive in their eco-innovation efforts was identified. Nations with unbalanced eco-innovation growth are urged to implement new strategies to balance their growth. Therefore, this research contributes to extending

  3. Interface design considerations for an in-vehicle eco-driving assistance system

    OpenAIRE

    Jamson, AH; Hibberd, DL; Merat, N

    2015-01-01

    This high-fidelity driving simulator study used a paired comparison design to investigate the effectiveness of 12 potential eco-driving interfaces. Previous work has demonstrated fuel economy improvements through the provision of in-vehicle eco-driving guidance using a visual or haptic interface. This study uses an eco-driving assistance system that advises the driver of the most fuel efficient accelerator pedal angle, in real time. Assistance was provided to drivers through a visual dashboar...

  4. An International Review of Eco-City Theory, Indicators, and Case Studies

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Nan [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Williams, Christopher [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2013-03-01

    This report is intended to answer the question: “What international experiences with ‘eco-cities’ can help the central Chinese government evaluate the performance of Chinese cities that pursue ‘lowcarbon’ urban development?” To answer this question, we reviewed the literature on eco-cities and closely related concepts, surveyed performance indicators used to evaluate sustainable urban development around the world, and compiled case studies of exceptional eco- and sustainable cities.

  5. Consumer Acceptance of Eco-Labeled Fish: A Mexican Case Study

    OpenAIRE

    Pérez-Ramírez, Mónica; Almendarez-Hernández, Marco; Avilés-Polanco, Gerzaín; Beltrán-Morales, Luis

    2015-01-01

    Fish eco-labeling is a market-based incentive program for sustainable fisheries. This paper examines consumers’ acceptance of eco-labeled fish by using data from a pilot study conducted in a coastal area of northwestern Mexico. An ordered probit model was applied, using 364 observations. The results show that most respondents favor the idea of eco-labeled fish as a sustainable option and know that this is a costlier option. Income level, consumers’ occupation and frequency of fish consumption...

  6. Is the Eco Audit Ordinance an effective instrument for the protection of the environment?

    International Nuclear Information System (INIS)

    Hickmann, M.; Wasser, U.; Wolf, F.

    1994-01-01

    Mr. Adams' discussion of the Eco-Audit Ordinance needs to be supplemented to by pointed out that, different from producers, the gas and water utilities are excluded from a participation in this communal system as laid down by the current version of the Eco-Audit Ordinance. But utilities are welcomed to observe the introduction and practical implementation of the Eco-Audit System in active and constructive way. (orig.) [de

  7. Nuclear reactors

    Energy Technology Data Exchange (ETDEWEB)

    Prescott, R F; George, B V; Baglin, C J

    1978-05-10

    Reference is made to thermal insulation on the inner surfaces of containment vessels of fluid cooled nuclear reactors and particularly in situations where the thermal insulation must also serve a structural function and transmit substantial load forces to the surface which it covers. An arrangement is described that meets this requirement and also provides for core support means that favourably influences the flow of hot coolant from the lower end of the core into a plenum space in the hearth of the reactor. The arrangement comprises a course of thermally insulating bricks arranged as a mosaic covering a wall of the reactor and a course of thermally insulating tiles arranged as a mosaic covering the course of bricks. Full constructional details are given.

  8. Nuclear reactors

    International Nuclear Information System (INIS)

    Prescott, R.F.; George, B.V.; Baglin, C.J.

    1978-01-01

    Reference is made to thermal insulation on the inner surfaces of containment vessels of fluid cooled nuclear reactors and particularly in situations where the thermal insulation must also serve a structural function and transmit substantial load forces to the surface which it covers. An arrangement is described that meets this requirement and also provides for core support means that favourably influences the flow of hot coolant from the lower end of the core into a plenum space in the hearth of the reactor. The arrangement comprises a course of thermally insulating bricks arranged as a mosaic covering a wall of the reactor and a course of thermally insulating tiles arranged as a mosaic covering the course of bricks. Full constructional details are given. (UK)

  9. Bioconversion reactor

    Science.gov (United States)

    McCarty, Perry L.; Bachmann, Andre

    1992-01-01

    A bioconversion reactor for the anaerobic fermentation of organic material. The bioconversion reactor comprises a shell enclosing a predetermined volume, an inlet port through which a liquid stream containing organic materials enters the shell, and an outlet port through which the stream exits the shell. A series of vertical and spaced-apart baffles are positioned within the shell to force the stream to flow under and over them as it passes from the inlet to the outlet port. The baffles present a barrier to the microorganisms within the shell causing them to rise and fall within the reactor but to move horizontally at a very slow rate. Treatment detention times of one day or less are possible.

  10. The planning and construction of Distributed Energy System in Qingdao Sino-German Eco-park

    Science.gov (United States)

    Wei, Cun; Zhang, Gaijing; Song, Peipei

    2018-04-01

    This paper introduce the development and characteristics of new energy, Eco-city and Distributed Energy System in China, a case study of Qingdao Sino-German Eco-park, research on practical application about planning and construction of Distributed Energy System in Eco-city. Results show that: we must first do a good job in energy planning, giving full play to their own advantages, and Distributed Energy System based renewable energy resources is a promising option for reducing emissions from electricity generation in Eco-city.

  11. Analysis of the ECO Test Results for Vehicles in the Republic of Croatia

    Directory of Open Access Journals (Sweden)

    Dražen Kovačević

    2007-01-01

    Full Text Available The work presents the classification of engines for theECO test requirement at the technical inspection of vehicles.The types of harmful components in the raw emission of internalcombustion engine are listed and described, as well asthe possibilities of their reduction. In accordance with theclassification of engines for the ECO test requirements the allowedvalues of harmful components according to the legallystipulated standards in Croatia are given. The study includedthe number of vehicles that passed the ECO test at technicalinspection in 2004 and these were then statistically processedand analyzed according to the type of vehicle, classification ofcar engines for the ECO test requirements and the year ofproduction.

  12. Assessment of eco-environmental quality of Western Taiwan Straits Economic Zone.

    Science.gov (United States)

    Ma, He; Shi, Longyu

    2016-05-01

    Regional eco-environmental quality is the key and foundation to the sustainable socio-economic development of a region. Eco-environmental quality assessment can reveal the capacity of sustainable socio-economic development in a region and the degree of coordination between social production and the living environment. As part of a new development strategy for Fujian Province, the Western Taiwan Straits Economic Zone (hereafter referred to as the Economic Zone) provides an important guarantee for the development of China's southeastern coastal area. Based on ecological and remote sensing data on the Economic Zone obtained in 2000, 2005, and 2010, this study investigated county-level administrative regions with a comprehensive index of eco-environmental indicators. An objective weighting method was used to determine the importance of each indicator. This led to the development of an indicator system to assess the eco-environmental quality of the economic zone. ArcGIS software was used to assess the eco-environmental quality of the economic zone based on each indicator. The eco-environmental quality index (EQI) of the county-level administrative regions was calculated. The overall eco-environmental quality of the Economic Zone during the period studied is described and analyzed. The results show that the overall eco-environmental quality of the Economic Zone is satisfactory, but significant intraregional differences still exist. The key to improving the overall eco-environmental quality of this area is to restore vegetation and preserve biodiversity.

  13. Effects of Eco-Drive Education on the Reduction of Fuel Consumption and CO2 Emissions

    OpenAIRE

    Barić, Danijela; Zovak, Goran; Periša, Marko

    2013-01-01

    Sustainable mobility is the basic and long-term goal of the traffic policy. Eco-driving represents one of 40 measures that should by 2050 contribute to 60% of traffic-generated emission reduction. The paper presents the significance of educating the drivers about eco-driving as well as eco-drive training with the aim of reducing fuel consumption and CO2 emission. During research the drivers were tested in three cycles, prior to education, immediately following the education and eco-training a...

  14. RFM-based eco-efficiency analysis using Takagi-Sugeno fuzzy and AHP approach

    International Nuclear Information System (INIS)

    Chen Ruiyang

    2009-01-01

    Eco-design is crucial to take environmental aspects into account in the phases of design. Few literature review that green product must meet market value. The development of models to predict market value is thus very useful because it can provide early eco-efficiency to the eco-design. For the eco-design engineer, when he tries to solve a customer feedback problem, he usually faces the eco-efficiency. There are, however, often other types of fuzziness uncertainty present, which are related to the quantity of eco-design conditions. In this paper, it is derived that analysis of eco-efficiency can be identified by using the RFM value for quantifying eco-design with Takagi-Sugeno fuzzy system on customer feedback problem. It clusters eco-efficiency into segments according to green product usages value expressed in terms of weighted RFM. This experiment examined the weighted RFM effect of overall average normalized, AHP and non-weighted for F1 metric. The experimental results show that the proposed methodology indeed can yield identification of higher quality

  15. DOES ECO-EFFICENCY REDUCE THE COST OF EQUITY CAPITAL? EMPIRICAL EVIDENCE FROM INDONESIA

    Directory of Open Access Journals (Sweden)

    Lisa Alviani

    2015-05-01

    Full Text Available The objective of this study is to examine the effect of eco-efficiency on the cost of equity capital. The study hypothesizes that the implementation of eco-efficiency reduces the cost of equity capital. Using manufacturing companies listed on the Indonesian Stock Exchange for the period 2010-2012 as data, and controlling for beta, company size, Book to Market ratio, and leverage; the study finds that the implementation of eco-efficiency may reduce the cost of equity capital. The findings suggest that companies should implement eco-efficency.

  16. Nuclear reactor

    International Nuclear Information System (INIS)

    Scholz, M.

    1976-01-01

    An improvement of the accessibility of that part of a nuclear reactor serving for biological shield is proposed. It is intended to provide within the biological shield, distributed around the circumference of the reactor pressure vessel, several shielding chambers filled with shielding material, which are isolated gastight from the outside by means of glass panes with a given bursting strength. It is advantageous that, on the one hand, inspection and maintenance will be possible without great effort and, on the other, a large relief cross section will be at desposal if required. (UWI) [de

  17. NEUTRONIC REACTOR

    Science.gov (United States)

    Wigner, E.P.; Weinberg, A.W.; Young, G.J.

    1958-04-15

    A nuclear reactor which uses uranium in the form of elongated tubes as fuel elements and liquid as a coolant is described. Elongated tubular uranium bodies are vertically disposed in an efficient neutron slowing agent, such as graphite, for example, to form a lattice structure which is disposed between upper and lower coolant tanks. Fluid coolant tubes extend through the uranium bodies and communicate with the upper and lower tanks and serve to convey the coolant through the uranium body. The reactor is also provided with means for circulating the cooling fluid through the coolant tanks and coolant tubes, suitable neutron and gnmma ray shields, and control means.

  18. Feedback-Based Eco-Design for Integrating the Recency, Frequency, and Monetary Value of Eco-Efficiency into Sustainability Management

    Directory of Open Access Journals (Sweden)

    Rui Yang Chen

    2016-09-01

    Full Text Available Customer feedback is used to understand customer requirements. Early design phases require the consideration of items including manufacturing, the environment, and sustainability management. Therefore, it is crucial that eco-efficiency is taken into account in the early design phases. Traditionally, eco-efficiency is considered only in terms of eco-design issues, not customer requirements based on business values such as Recency, Frequency, and Monetary (RFM value. In the meantime, integrating innovation from eco-design is one important aspect. Here, I propose that customer feedback-based eco-efficiency and TRIZ-based innovation can be considered in early eco-design based on the RFM value for sustainability management. The analytic hierarchy process (AHP and fuzzy-based AHP were integrated to explore the relative weights of RFM variables for business value evaluation. The innovative method of the paper is using a TRIZ contradiction matrix associated with engineering parameters for eco-design. The experimental study has been carried out, and it meets the forecasting business value for green product usage. The business value was used as the decision-making factor in order to evaluate both environmental and marketing performance.

  19. Neutronic reactor

    International Nuclear Information System (INIS)

    Wende, C.W.J.

    1976-01-01

    The method of operating a water-cooled neutronic reactor having a graphite moderator is described which comprises flowing a gaseous mixture of carbon dioxide and helium, in which the helium comprises 40--60 volume percent of the mixture, in contact with the graphite moderator. 2 claims, 4 figures

  20. Neutronic reactor

    International Nuclear Information System (INIS)

    Wende, C.W.J.

    1976-01-01

    A safety rod for a nuclear reactor has an inner end portion having a gamma absorption coefficient and neutron capture cross section approximately equal to those of the adjacent shield, a central portion containing materials of high neutron capture cross section and an outer end portion having a gamma absorption coefficient at least equal to that of the adjacent shield

  1. Reactor facility

    International Nuclear Information System (INIS)

    Suzuki, Hiroaki; Murase, Michio; Yokomizo, Osamu.

    1997-01-01

    The present invention provides a BWR type reactor facility capable of suppressing the amount of steams generated by the mutual effect of a failed reactor core and coolants upon occurrence of an imaginal accident, and not requiring spacial countermeasures for enhancing the pressure resistance of the container vessel. Namely, a means for supplying cooling water at a temperature not lower by 30degC than the saturated temperature corresponding to the inner pressure of the containing vessel upon occurrence of an accident is disposed to a lower dry well below the pressure vessel. As a result, upon occurrence of such an accident that the reactor core should be melted and flown downward of the pressure vessel, when cooling water at a temperature not lower than the saturated temperature, for example, cooling water at 100degC or higher is supplied to the lower dry well, abrupt generation of steams by the mutual effect of the failed reactor core and cooling water is scarcely caused compared with a case of supplying cooling water at a temperature lower than the saturation temperature by 30degC or more. Accordingly, the amount of steams to be generated can be suppressed, and special countermeasure is no more necessary for enhancing the pressure resistance of the container vessel is no more necessary. (I.S.)

  2. Nuclear reactor

    International Nuclear Information System (INIS)

    Gilroy, J.E.

    1980-01-01

    An improved cover structure for liquid metal cooled fast breeder type reactors is described which it is claimed reduces the temperature differential across the intermediate grid plate of the core cover structure and thereby reduces its subjection to thermal stresses. (UK)

  3. Reactor licensing

    International Nuclear Information System (INIS)

    Harvie, J.D.

    2002-01-01

    This presentation discusses reactor licensing and includes the legislative basis for licensing, other relevant legislation , the purpose of the Nuclear Safety and Control Act, important regulations, regulatory document, policies, and standards. It also discusses the role of the CNSC, its mandate and safety philosophy

  4. Nuclear reactor

    International Nuclear Information System (INIS)

    Hattori, Sadao; Sekine, Katsuhisa.

    1987-01-01

    Purpose: To decrease the thickness of a reactor container and reduce the height and the height and plate thickness of a roof slab without using mechanical vibration stoppers. Constitution: Earthquake proofness is improved by filling fluids such as liquid metal between a reactor container and a secondary container and connecting the outer surface of the reactor container with the inner surface of the secondary container by means of bellows. That is, for the horizontal seismic vibrations, horizontal loads can be supported by the secondary container without providing mechanical vibration stoppers to the reactor container and the wall thickness can be reduced thereby enabling to simplify thermal insulation structure for the reduction of thermal stresses. Further, for the vertical seismic vibrations, verical loads can be transmitted to the secondary container thereby enabling to reduce the wall thickness in the same manner as for the horizontal load. By the effect of transferring the point of action of the container load applied to the roof slab to the outer circumferential portion, the intended purpose can be attained and, in addition, the radiation dose rate at the upper surface of the roof slab can be decreased. (Kamimura, M.)

  5. Reactor system

    International Nuclear Information System (INIS)

    Miyano, Hiroshi; Narabayashi, Naoshi.

    1990-01-01

    The represent invention concerns a reactor system with improved water injection means to a pressure vessel of a BWR type reactor. A steam pump is connected to a heat removing system pipeline, a high pressure water injection system pipeline and a low pressure water injection system pipeline for injecting water into the pressure vessel. A pump actuation pipeline is disposed being branched from a main steam pump or a steam relieaf pipeline system, through which steams are supplied to actuate the steam pump and supply cooling water into the pressure vessel thereby cooling the reactor core. The steam pump converts the heat energy into the kinetic energy and elevates the pressure of water to a level higher than the pressure of the steams supplied by way of a pressure-elevating diffuser. Cooling water can be supplied to the pressure vessel by the pressure elevation. This can surely inject cooling water into the pressure vessel upon loss of coolant accident or in a case if reactor scram is necessary, without using an additional power source. (I.N.)

  6. Reactor core

    International Nuclear Information System (INIS)

    Matsuura, Tetsuaki; Nomura, Teiji; Tokunaga, Kensuke; Okuda, Shin-ichi

    1990-01-01

    Fuel assemblies in the portions where the gradient of fast neutron fluxes between two opposing faces of a channel box is great are kept loaded at the outermost peripheral position of the reactor core also in the second operation cycle in the order to prevent interference between a control rod and the channel box due to bending deformation of the channel box. Further, the fuel assemblies in the second row from the outer most periphery in the first operation cycle are also kept loaded at the second row in the second operation cycle. Since the gradient of the fast neutrons in the reactor core is especially great at the outer circumference of the reactor core, the channel box at the outer circumference is bent such that the surface facing to the center of the reactor core is convexed and the channel box in the second row is also bent to the identical direction, the insertion of the control rod is not interfered. Further, if the positions for the fuels at the outermost periphery and the fuels in the second row are not altered in the second operation cycle, the gaps are not reduced to prevent the interference between the control rod and the channel box. (N.H.)

  7. New about research reactors

    International Nuclear Information System (INIS)

    Egorenkov, P.M.

    2001-01-01

    The multi-purpose research reactor MAPLE (Canada) and concept of new reactor MAPLE-CNF as will substitute the known Canadian research reactor NRU are described. New reactor will be used as contributor for investigations into materials, neutron beams and further developments for the CANDU type reactor. The Budapest research reactor (BRR) and its application after the last reconstruction are considered also [ru

  8. Procool - eco-efficient cold appliances for the commercial use

    International Nuclear Information System (INIS)

    Schaeppi, Bernd; Ritter, Herbert; Barthel, Claus; Hermann, Laurenz; Streif, Oswald

    2005-01-01

    Pro-Cool is an EU-wide demonstration project which supports the development and market penetration of eco-efficient plug-in cold appliances for the commercial use. These products should be both highly energy efficient, free of HFC-containing refrigerants and -foaming agents and eco-efficient in a general sense. Thus the project corresponds with the EU Integrated Product Policy which aims at improving products by considering the ecological impact along the product life cycle. Besides ecological criteria, which are central for the project, other aspects relevant for purchasers like warranty and functionality are taken into account to guarantee the acceptance of the products by the demand side target groups. The so called 'voice of the customer' has been considered in the development of the criteria To achieve the necessary stimulation of the supply and demand side market a combined competition and procurement approach is developed addressing both manufacturers and buyers respectively users of the products. The central measure of the project is a European competition for suppliers what offers leading manufacturers of the market the opportunity to present themselves as innovative companies which provide eco-efficient equipment. Eight leading manufacturers which have a high market share in the selected product categories are taking part in the competition. Furthermore three large companies representing the demand side branches of super market chains and drinks industry already have signed a general agreement to support the project and to consider the products resulting from the competition in their procurement activities. Thus major supply and demand side target groups which are capable to support market transformation have joined the project. The competition terminates by December 2005 and the award of the winning products takes place in spring 2006 at an international fair or conference event. The paper presents the objectives and the concept of the project. Relevant

  9. Eco RI RFLP in the human IGF II gene

    Energy Technology Data Exchange (ETDEWEB)

    Cocozza, S; Garofalo, S; Robledo, R; Monticelli, A; Conti, A; Chiarotti, L; Frunzio, R; Bruni, C B; Varrone, S

    1988-03-25

    The probe was a 500 bp cDNA containing exons 2-3 and 4 of the human IGF II gene. The clone was isolated by screening a human liver cDNA library with synthetic oligonucleotides. Eco RI digestion of genomic DNA and hybridization with the IGF II probe detects a two allele polymorphism with allelic fragments of 13.5 kb and 10.5 kb. The frequency was studied 38 unrelated Caucasians: Human IGF II gene was localized on the short arm of chromosome 11 (p15) by in situ hybridization. Codominant segregation was observed in 2 Caucasian families (10 individuals).

  10. Some Aspects of Eco Tourism with View to Montenegro: Overview

    Directory of Open Access Journals (Sweden)

    Jelisavka Bulatović

    2017-09-01

    Full Text Available The International Ecotourism Society defines ecotourism as responsible travel to natural areas that conserves the environment and sustains the well-being of local people (Honey, 1999. Thus, Ecotourism has been promoted as a non-consumptive use of nature and as a possible win – win development strategy, especially for underdeveloped areas. It should generate money in an ecologically and socially friendly way than other forms of land exploitation (Edwards et al., 1998. This article points to some aspects of eco-tourism, with emphasis on the Montenegro. The country has especially much to offer to nature enthusiasts.

  11. ECOS - analysis of sensitivity to database and input parameters

    International Nuclear Information System (INIS)

    Sumerling, T.J.; Jones, C.H.

    1986-06-01

    The sensitivity of doses calculated by the generic biosphere code ECOS to parameter changes has been investigated by the authors for the Department of the Environment as part of its radioactive waste management research programme. The sensitivity of results to radionuclide dependent parameters has been tested by specifying reasonable parameter ranges and performing code runs for best estimate, upper-bound and lower-bound parameter values. The work indicates that doses are most sensitive to scenario parameters: geosphere input fractions, area of contaminated land, land use and diet, flux of contaminated waters and water use. Recommendations are made based on the results of sensitivity. (author)

  12. Eco-theological Responses to Climate Change in Oceania

    DEFF Research Database (Denmark)

    Rubow, Cecilie; Bird, Cliff

    2016-01-01

    to reform classical theologies and church practices. Secondly, we identify challenges facing the contextual theologies, among them recent claims about climate-change-denying responses by Biblicist Christians in the Pacific region. These challenges apart, we suggest, thirdly, that the churches are important......This paper explores eco-theological responses to climate change in Oceania. First, we review central texts in the contextual theological tradition in Oceania, focusing on recent responses to climate change. This points to a body of theological texts integrating climate change into a broader effort...

  13. Reactor core of nuclear reactor

    International Nuclear Information System (INIS)

    Sasagawa, Masaru; Masuda, Hiroyuki; Mogi, Toshihiko; Kanazawa, Nobuhiro.

    1994-01-01

    In a reactor core, a fuel inventory at an outer peripheral region is made smaller than that at a central region. Fuel assemblies comprising a small number of large-diameter fuel rods are used at the central region and fuel assemblies comprising a great number of smalldiameter fuel rods are used at the outer peripheral region. Since a burning degradation rate of the fuels at the outer peripheral region can be increased, the burning degradation rate at the infinite multiplication factor of fuels at the outer region can substantially be made identical with that of the fuels in the inner region. As a result, the power distribution in the direction of the reactor core can be flattened throughout the entire period of the burning cycle. Further, it is also possible to make the degradation rate of fuels at the outer region substantially identical with that of fuels at the inner side. A power peak formed at the outer circumferential portion of the reactor core of advanced burning can be lowered to improve the fuel integrity, and also improve the reactor safety and operation efficiency. (N.H.)

  14. USING ECO-EVOLUTIONARY INDIVIDUAL-BASED MODELS TO INVESTIGATE SPATIALLY-DEPENDENT PROCESSES IN CONSERVATION GENETICS

    Science.gov (United States)

    Eco-evolutionary population simulation models are powerful new forecasting tools for exploring management strategies for climate change and other dynamic disturbance regimes. Additionally, eco-evo individual-based models (IBMs) are useful for investigating theoretical feedbacks ...

  15. Growing food, feeding change : Towards a holistic and dynamic approach of eco-city planning

    NARCIS (Netherlands)

    Vernay, A.B.H.; Salcedo Rahola, T.B.; Ravesteijn, W.

    2010-01-01

    In response to increasing environmental problems and consciousness in relation to urbanization, more and more cities are trying to become eco-cities. We can question, however, whether these cities can be considered as sustainable cities. The eco-city concept usually includes criteria regarding

  16. ECO TECH LINK: PT3 Grant Builds Technology Circles in the K-18 Community.

    Science.gov (United States)

    Klinger, Katie; Duckett, Jane; Medrano, Maria; Crow, Nedra; Stowers, Gwen

    Through the vehicle of the PT3 grant program, ECO TECH LINK has built a strong consortium to support technology circles of government, education and business in order to raise student achievement scores, shorten the time it takes to earn a teaching credential, and enhance the quality of teacher credential courses. The ECO TECH LINK grant enables…

  17. Analisis Pengaruh Eco-Label terhadap Kesadaran Konsumen untuk Membeli Green Product

    OpenAIRE

    Muslim, Erlinda; Indriani, Dyah Rusty

    2014-01-01

    . Pandangan manusia telah bergeser seiring dengan meningkatnya kepedulian terhadap lingkungan, sehingga menimbulkan tuntutan bagi pelaku bisnis untuk memberikan solusi dalam menghadapi berbagai permasalahan lingkungan melalui pengembangan green product. Eco-label sebagai jaminan mutu green product merupakan isu di dunia bisnis dan perdagangan global saat ini. Tujuan penelitian ini adalah menerapkan Structural Equation Modeling (SEM) untuk mengetahui pengaruh eco-label terhadap kesadaran kons...

  18. Advancing eco-driving strategies for drivers and automated vehicles traveling within intersection vicinities : final report.

    Science.gov (United States)

    2016-01-01

    Vehicle emissions occupy a considerable share of emission inventories in the United States. One of the approaches taken to minimize vehicle emissions is eco-driving. Supported by advanced ITS technologies, it is available to provide the real-time eco...

  19. The ECO European Project: A New MOOC Dimension Based on an Intercreativity Environment

    Science.gov (United States)

    Acedo, Sara Osuna; Cano, Lucía Camarero

    2016-01-01

    The ECO European Project funded by the European Commission is dedicated to bringing MOOCs to a new dimension by taking advantage of the new possibilities offered by the Social Web (O'Reilly, 2005). This paper focuses on the intercreative aspects of MOOCs. It takes a look at the characteristics of the new ECO MOOCs to see if they are designed and…

  20. [Ecosystem service value and its aplication in evaluation of eco-economic harmonious development].

    Science.gov (United States)

    Wu, Jian-zhai; Li, Bo; Zhang, Xin-shi

    2007-11-01

    Based on the data of land use/cover and by using eco-economic harmony index (EEH) this paper studied the spatiotemporal characteristics of ecosystem service value on the northern slope of Tianshan Mountains, and evaluated the harmony degree of eco-economic development in the region. The results showed that the total ecosystem service value on the northern slope of Tianshan Mountains was increased from 319.93 x 10(8) yuan in 1989 to 321.26 x 10(8) yuan in 2000, with a net increment of 0.42%. The regional eco-economic development was overall at a low harmony level, being higher in eastern part than in middle and western parts, among which, eight counties had a positive value of EEH and their eco-economic development was harmonious, while seven counties had a negative value of EEH and their eco-economic development was inharmonic. The eco-economic development in the region was at the margin of harmony, and thus, more attention should be paid to strengthen the protection of eco-environment and promote the harmonious development of eco-economy to have a sustainable development.

  1. Eco-Tourism Development Strategy Balurannational Park in the Regency of Situbondo, East Java, Indonesia

    Science.gov (United States)

    Siswanto, Adil; Moeljadi

    2015-01-01

    Baluran National Park in the regency of Situbondo, East Java-Indonesia, highly prospective for development of sustainable tourism that can improve the welfare of local people. The suitable tourism type is eco-tourism with local people involvement. The purposes of this study are: 1) To know the local people involvement in eco-tourism development;…

  2. ECO LOGIC INTERNATIONAL GAS-PHASE CHEMICAL REDUCTION PROCESS - THE THERMAL DESORPTION UNIT - APPLICATIONS ANALYSIS REPORT

    Science.gov (United States)

    ELI ECO Logic International, Inc.'s Thermal Desorption Unit (TDU) is specifically designed for use with Eco Logic's Gas Phase Chemical Reduction Process. The technology uses an externally heated bath of molten tin in a hydrogen atmosphere to desorb hazardous organic compounds fro...

  3. Eco-Webbing: A Teaching Strategy to Facilitate Critical Consciousness and Agency

    Science.gov (United States)

    Williams, Joseph M.; McMahon, H. George; Goodman, Rachael D.

    2015-01-01

    Eco-webbing is a teaching strategy that can be used to help counselor educators integrate a social justice focus into their courses. Preliminary data indicated increased critical consciousness and social justice agency as a result of using eco-webbing with counseling students (N = 17). The authors provide implications for counselor educators and…

  4. EcoIS: An image serialization library for plot-based plant flowering phenology

    DEFF Research Database (Denmark)

    Granados, Joel A.; Bonnet, Philippe; Hansen, Lars Hostrup

    2013-01-01

    they are produced by introducing an open source Python (www.python.org) library called EcoIS that creates image series from unaligned pictures of specially equipped plots. We use EcoIS to sample flowering phenology plots in a high arctic environment and create image series that later generate phenophase counts...

  5. Uma jornada histórica de Umberto Eco em busca da beleza

    Directory of Open Access Journals (Sweden)

    Elaine Cristina Senko

    2015-09-01

    Full Text Available Esta é uma resenha da importante obra de Umberto Eco "História da Beleza". ECO, Umberto. História da Beleza. Tradução de Eliana Aguiar. 3ª edição. Rio de Janeiro: Record, 2013, 438 p.

  6. EcoWellness & Guiding Principles for the Ethical Integration of Nature into Counseling

    Science.gov (United States)

    Reese, Ryan F.

    2016-01-01

    Connection with nature impacts human wellness, yet few resources currently exist in the international literature to help guide clinicians in the ethical integration of EcoWellness into therapeutic processes. Ethical principles for EcoWellness practice are introduced and linked to applicable portions of the American Counseling Association's (2014)…

  7. Activist or Terrorist? Negotiating Discourses of Eco-Terror in "If a Tree Falls"

    Science.gov (United States)

    Olson, Jade

    2018-01-01

    Environmentalist voices like the Earth Liberation Front have been labeled "eco-terrorists." The 2011 documentary film "If a Tree Falls" explores how "eco-terrorism" troubles the unstable border between activism and terrorism. This essay offers a textual analysis of the film's negotiation of the activism/terrorism…

  8. Eco-innovation Dynamics at a Large State-Owned Wind Turbine Manufacture in China

    DEFF Research Database (Denmark)

    Yang, Yan; YIN, Shoujun

    This paper discloses the learning process and stakeholder relations in eco-innovation dynamics at a large state-owned wind turbine manufacture in China in the past 7 years. Based on an understanding of eco-innovation and eco-innovation dynamics, we propose an analytical framework of eco-innovatio......This paper discloses the learning process and stakeholder relations in eco-innovation dynamics at a large state-owned wind turbine manufacture in China in the past 7 years. Based on an understanding of eco-innovation and eco-innovation dynamics, we propose an analytical framework of eco......-innovation dynamics from a multi-perspective of learning, triple helix and path dependence. We find that, in case company’s developing wind turbine business: (1) individual and collective learning were characterized by a Do-Use-Interact mode in product innovation and assembly procedure innovation and diverse learning...... approaches were employed; (2)its product development, marketing strategy and stakeholder relations were considerably affected by central government and local government on policies, directives, regulations; (3) co-R&D with foreign companies provided it an important learning platform on product development...

  9. A Product Line Analysis for Eco-Designed Fashion Products: Evidence from an Outdoor Sportswear Brand

    Directory of Open Access Journals (Sweden)

    Luo Wang

    2017-07-01

    Full Text Available With the increasing awareness of sustainability, eco-design has been an important trend in the fashion industry. Many fashion brands such as Nike, Adidas, and The North Face have developed sustainable fashion by incorporating eco-design elements. Eco-design is an important part of sustainable supply chains. In this paper, we conducted a product line analysis of eco-designed products from a famous outdoor sportswear brand, Patagonia. We collected Patagonia’s 2017 Spring Season product line data and analyzed the data through descriptive analysis, factor analysis and correlation analysis. We found that Patagonia mainly uses organic, recycled, and traceable materials in their eco-product line development. We identified that the usage of eco-materials may significantly affect the number of color choices and product weight as well as gender difference, pattern design, product fit and online reviewers’ opinions at Patagonia. We argued that Patagonia should focus on functionality more than aesthetics in eco-design. We discussed how sustainable fashion firms should manage eco-design in the supply chain.

  10. [Eco-efficiency change and its driving factors in Tongling City of Anhui Province].

    Science.gov (United States)

    Wang, Yi-Chen; Wang, Yuan; Zhu, Xiao-Dong; Wu, Xiao-Qing; Wang, Ke; Ren, Ke-Xiu; Lu, Gen-Fa

    2011-02-01

    This paper first applied material flow analysis (MFA) to construct three levels of regional eco-efficiency indicators, i.e., regional direct eco-efficiency (RDE), regional total eco-efficiency (RTE), and holistic eco-efficiency (HE), and adopted the newly developed data envelopment analysis (DEA) to evaluate the eco-efficiency of Tongling City during the period of 1990-2008. We also applied Malmquist productivity index (MPI) to explore the eco-efficiency change between two following years and its driving factors. The main results were summarized as 1) though the RDE of Tongling City in 1990-2008 kept an increasing trend, its mean eco-efficiency was not high (close to 0.8 in 80% of the years), being lower than that of the RTE and HE, and 2) the RDE change was closely relevant to the improvement in resource management and the technical input in environmental protection in recent years. In order to further improve the RDE of the City, it would be necessary to raise its eco-efficiency via expanding raw material input, reducing domestic extraction, promoting resources productivity, and taking more measures on environmental protection facilities construction.

  11. Construction and curation of a large ecotoxicological dataset for the EcoTTC

    Science.gov (United States)

    The Ecological Threshold for Toxicological Concern, or ecoTTC, has been proposed as a natural next step to the well-known human safety TTC concept. The ecoTTC is particularly suited for use as an early screening tool in the risk assessment process, in situations where chemical h...

  12. Do Eco-rating Schemes Improve the Environmental Performance of Ships?

    DEFF Research Database (Denmark)

    Poulsen, René Taudal; Hermann, Roberto Rivas; Smink, Carla K.

    2018-01-01

    of ships. Extending the private environmental governance literature into a mature service industry with global operations, the paper shows that concerns about eco-rating schemes’ effectiveness also have relevance here. Shipping eco-rating schemes fall short of best practices for design and governance...

  13. Nuclear reactor

    International Nuclear Information System (INIS)

    Gibbons, J.F.; McLaughlin, D.J.

    1978-01-01

    In the pressure vessel of the water-cooled nuclear reactor there is provided an internal flange on which the one- or two-part core barrel is hanging by means of an external flange. A cylinder is extending from the reactor vessel closure downwards to a seat on the core cupport structure and serves as compression element for the transmission of the clamping load from the closure head to the core barrel (upper guide structure). With the core barrel, subject to tensile stress, between the vessel internal flange and its seat on one hand and the compression of the cylinder resp. hold-down element between the closure head and the seat on the other a very strong, elastic sprung structure is obtained. (DG) [de

  14. Nuclear reactor

    International Nuclear Information System (INIS)

    Sasaki, Tomozo.

    1987-01-01

    Purpose: To improve the nuclear reactor availability by enabling to continuously exchange fuels in the natural-slightly enriched uranium region during operation. Constitution: A control rod is withdrawn to the midway of a highly enriched uranium region by means of control rod drives and the highly enriched uranium region is burnt to maintain the nuclear reactor always at a critical state. At the same time, fresh uranium-slightly enriched uranium is continuously supplied gravitationally from a fresh fuel reservoir through fuel reservoir to each of fuel pipes in the natural-slightly enriched uranium region. Then, spent fuels reduced with the reactivity by the burn up are successively taken out from the bottom of each of the fuel pipes through an exit duct and a solenoid valve to the inside of a spent fuel reservoir and the burn up in the natural-slightly enriched uranium region is conducted continuously. (Kawakami, Y.)

  15. Nuclear reactor

    International Nuclear Information System (INIS)

    Sakurai, Mikio; Yamauchi, Koki.

    1983-01-01

    Purpose: To improve the channel stability and the reactor core stability in a spontaneous circulation state of coolants. Constitution: A reactor core stabilizing device comprising a differential pressure automatic ON-OFF valve is disposed between each of a plurality of jet pumps arranged on a pump deck. The stabilizing device comprises a piston exerted with a pressure on the lower side of the pump deck by way of a pipeway and a valve for flowing coolants through the bypass opening disposed to the pump deck by the opening and closure of the valve ON-OFF. In a case where the jet pumps are stopped, since the differential pressure between the upper and the lower sides of the pump deck is removed, the valve lowers gravitationally into an opened state, whereby the coolants flow through the bypass opening to increase the spontaneous circulation amount thereby improve the stability. (Yoshino, Y.)

  16. Nuclear reactor

    International Nuclear Information System (INIS)

    Aleite, W.; Bock, H.W.; Struensee, S.

    1976-01-01

    The invention concerns the use of burnable poisons in a nuclear reactor, especially in PWRs, in order to improve the controllability of the reactor. An unsymmetrical arrangement in the lattice is provided, if necessary also by insertion of special rods for these additions. It is proposed to arrange the burnable poisons in fuel elements taken over from a previous burn-up cycle and to distribute them, going out from the side facing the control rods, over not more than 20% of the lenth of the fuel elements. It seems sufficient, for the burnable poisons to bind an initial reactivity of only 0.1% and to become ineffective after normal operation of 3 to 4 months. (ORU) [de

  17. Reactor container

    International Nuclear Information System (INIS)

    Ichiki, Tadaharu; Saba, Kazuhisa.

    1979-01-01

    Purpose: To improve the earthquake resistance as well as reduce the size of a container for a nuclear reactor with no adverse effects on the decrease of impact shock to the container and shortening of construction step. Constitution: Reinforcing profile steel materials are welded longitudinally and transversely to the inner surface of a container, and inner steel plates are secured to the above profile steel materials while keeping a gap between the materials and the container. Reactor shielding wall planted to the base concrete of the container is mounted to the pressure vessel, and main steam pipeways secured by the transverse beams and led to the outside of container is connected. This can improve the rigidity earthquake strength and the safetiness against the increase in the inside pressure upon failures of the container. (Yoshino, Y.)

  18. Reactor container

    International Nuclear Information System (INIS)

    Oyamada, Osamu; Furukawa, Hideyasu; Uozumi, Hiroto.

    1979-01-01

    Purpose: To lower the position of an intermediate slab within a reactor container and fitting a heat insulating material to the inner wall of said intermediate slab, whereby a space for a control rod exchanging device and thermal stresses of the inner peripheral wall are lowered. Constitution: In the pedestal at the lower part of a reactor pressure vessel there is formed an intermediate slab at a position lower than diaphragm floor slab of the outer periphery of the pedestal thereby to secure a space for providing automatic exchanging device of a control rod driving device. Futhermore, a heat insulating material is fitted to the inner peripheral wall at the upper side of the intermediate slab part, and the temperature gradient in the wall thickness direction at the time of a piping rupture trouble is made gentle, and thermal stresses at the inner peripheral wall are lowered. (Sekiya, K.)

  19. Neutronic reactor

    International Nuclear Information System (INIS)

    Lewis, W.R.

    1978-01-01

    Disclosed is a graphite-moderated, water-cooled nuclear reactor including a plurality of rectangular graphite blocks stacked in abutting relationship in layers, alternate layers having axes which are normal to one another, alternate rows of blocks in alternate layers being provided with a channel extending through the blocks, said channeled blocks being provided with concave sides and having smaller vertical dimensions than adjacent blocks in the same layer, there being nuclear fuel in the channels

  20. Nuclear reactors

    International Nuclear Information System (INIS)

    Humphreys, P.; Davidson, D.F.; Thatcher, G.

    1980-01-01

    The cooling system of a liquid metal cooled fast breeder nuclear reactor of the pool kind is described. It has an intermediate heat exchange module comprising a tube-in-shell heat exchanger and an electromagnetic flow coupler in the base region of the module. Primary coolant is flowed through the heat exchanger being driven by electromagnetic interaction with secondary liquid metal coolant flow effected by a mechanical pump. (author)

  1. Environmental Implications of Eco-Labeling for Rice Farming Systems

    Directory of Open Access Journals (Sweden)

    Solhee Kim

    2018-04-01

    Full Text Available Concerns about climate change have forced countries to strengthen regulations, standards, and certifications related to greenhouse gas emissions. Various policies targeting farm products, such as carbon labeling and the Environmentally-Friendly Agricultural Product Certification (EFAPC for agricultural products, have been implemented in South Korea to reduce greenhouse gas emissions in the agricultural sector. The purpose of this study was to evaluate the implications of the various certification systems for rice farming, including organic farming, non-pesticide farming, and low-pesticide farming. For this study, we constructed a life cycle inventory (LCI of rice farming systems including conventional, low-pesticide, non-pesticide, and organic farming systems in South Korea. Finally, we compared international farming systems in South Korea, the U.S., and the EU. The rice farming systems with eco-labeling certifications have reduced the environmental impacts. The environmental impacts of rice farming by country were highest in the U.S. (100.0, followed by the EU (53.7, and Korea’s conventional (48.6, low-pesticide (35.8, non-pesticide (28.9, and organic (16.7 farming practices. These results may be useful in proliferating and improving the methodology to evaluate eco-labeling and carbon labeling systems.

  2. ECO-TOURISM SUSTAINABILITY THROUGH PV TECHNOLOGY: A COMPREHENSIVE REVIEW

    Directory of Open Access Journals (Sweden)

    ARAVIND C. V

    2013-12-01

    Full Text Available Through the Economic Transformation program the Malaysian Government aims to consider tourism as one of the major contributors to the country’s economy and as an industry that imbibe on the principles of environmental responsibility and sustainable development. The growing challenges in the prevention of expansion in agriculture, forestry and aquaculture, and over-exploitation of the natural resources, have made ecotourism extremely popular as a solution for developing tourism sites. Ecotourism attracts many people who wish not only to explore natural wonders but also to protect them for future generations. Most of the ecotourism sites are presumably situated far from the conventional energy resources and thus transporting electricity to those areas are discussed as inefficient and unsustainable. However, solar Photo-voltaic (PV system is clean and alternative energy to suffice the energy demands of eco-tourist sites. This paper puts statements of the energy demand in global and its impact on the traditional fossil fuels and proposes PV as an alternative renewable technology pertaining to the eco-tourism application. The paper especially focuses on solar PV systems which not only could supply the energy demand of tourist sites but can also maintain the image of the ecotourism. A case of a model lodge is used for the study, through the energy demand analysis. A comprehensive review on the PV architecture is presented that derive interest in the implementation of such structure for the case presented.

  3. An experimental investigation on mechanical behaviour of eco - friendly concrete

    Science.gov (United States)

    Narender Reddy, A.; Meena, T.

    2017-11-01

    Fly ash (FA) and Alccofine are the eco-friendly materials that can be used in the production of concrete composites. Initially, concrete mixes of M30 grade with replacement of cement by 0%, 5%, 10%, 15%, 20% and 25% by weight of Fly ash were prepared. They were subjected to compression test so as to select the optimum replacement percentage of FA. Keeping this optimum percentage of FA as constant, additional replacement of cement with Alccofine was done varying its replacement in the range of 8%, 10%, 12% and 14%. The mechanical properties such as compressive, split tensile and flexural strengths of these mixes were computed for 7, 14 and 28 days. The results of Eco-Friendly Concrete (EFC) are compared with those of control concrete. It was observed that EFC mixes exhibited superior qualities like quick setting and enhanced workability, their mechanical properties were found to be higher than that of the conventional concrete. This goes to prove that the combination of FA and Alccofine together as replacement for cement would enhance the properties of EFC.

  4. Facilitation Processes and Skills Supporting EcoCity Development

    Directory of Open Access Journals (Sweden)

    Carmen Antuña-Rozado

    2018-03-01

    Full Text Available Ecocities can provide solutions for the improvement of human settlements around the world and the living conditions therein, but in the authors’ experience, only as long as they are able to address the following questions correctly: How to formulate an ecocity concept that, considering issues of general concern, can be at the same time adapted to different local conditions? What are the instruments supporting the development and implementation of ecocity solutions? VTT’s EcoCity concept for sustainable community and neighbourhood regeneration and development has been designed in response to the first question. Likewise, specific methodologies and effective facilitation processes and skills have been developed in response to the second question. Since the methodologies have been discussed in a previous scientific article, the present one focuses on the facilitation processes and skills, and also on other related, fundamental aspects like participation, adaptation, capacity building, etc. Facilitation processes supporting EcoCity development require matching “hard” and “soft” skills in a fluid way. The main findings are discussed with the help of two case studies: one in Medellín (Colombia, and the other one in Zambia.

  5. Nuclear reactor

    International Nuclear Information System (INIS)

    Jungmann, A.

    1975-01-01

    Between a PWR's reactor pressure vessel made of steel and the biological shield made of concrete there is a gap. This gap is filled up with a heat insulation facting the reactor pressure vessel, for example with insulating concrete segments jacketed with sheet steel and with an additional layer. This layer serves for smooth absorption of compressive forces originating in radial direction from the reactor pressure vessel. It consists of cylinder-segment shaped bricks made of on situ concrete, for instance. The bricks have cooling agent ports in one or several rows which run parallel to the wall of the pressure vessel and in alignment with superposed bricks. Between the layer of bricks and the biological shield or rather the heat insulation, there are joints which are filled, however, with injected mortar. That guarantees a smooth series of connected components resistant tom compression. Besides, a slip foil can be set between the heat insulation and the joining joint filled with mortar for the reduction of the friction at thermal expansions. (TK) [de

  6. Reactor building

    International Nuclear Information System (INIS)

    Ebata, Sakae.

    1990-01-01

    At least one valve rack is disposed in a reactor building, on which pipeways to a main closure valve, valves and bypasses of turbines are placed and contained. The valve rack is fixed to the main body of the building or to a base mat. Since the reactor building is designed as class A earthquake-proofness and for maintaining the S 1 function, the valve rack can be fixed to the building main body or to the base mat. With such a constitution, the portions for maintaining the S 1 function are concentrated to the reactor building. As a result, the dispersion of structures of earthquake-proof portion corresponding to the reference earthquake vibration S 1 can be prevented. Accordingly, the conditions for the earthquake-proof design of the turbine building and the turbine/electric generator supporting rack are defined as only the class B earthquake-proof design conditions. In view of the above, the amount of building materials can be saved and the time for construction can be shortened. (I.S.)

  7. Nuclear reactors

    International Nuclear Information System (INIS)

    Yoshioka, Michiko.

    1985-01-01

    Purpose: To obtain an optimum structural arrangement of IRM having a satisfactory responsibility to the inoperable state of a nuclear reactor and capable of detecting the reactor power in an averaged manner. Constitution: As the structural arrangement of IRM, from 6 to 16 even number of IRM are bisected into equial number so as to belong two trip systems respectively, in which all of the detectors are arranged at an equal pitch along a circumference of a circle with a radius rl having the center at the position of the central control rod in one trip system, while one detector is disposed near the central control rod and other detectors are arranged substantially at an equal pitch along the circumference of a circle with a radius r2 having the center at the position for the central control rod in another trip system. Furthermore, the radius r1 and r2 are set such that r1 = 0.3 R, r2 = 0.5 R in the case where there are 6 IRM and r1 = 0.4 R and R2 = 0.8 R where there are eight IRM where R represents the radius of the reactor core. (Kawakami, Y.)

  8. MLR reactor

    International Nuclear Information System (INIS)

    Ryazantsev, E.P.; Egorenkov, P.M.; Nasonov, V.A.; Smimov, A.M.; Taliev, A.V.; Gromov, B.F.; Kousin, V.V.; Lantsov, M.N.; Radchenko, V.P.; Sharapov, V.N.

    1998-01-01

    The Material Testing Loop Reactor (MLR) development was commenced in 1991 with the aim of updating and widening Russia's experimental base to validate the selected directions of further progress of the nuclear power industry in Russia and to enhance its reliability and safety. The MLR reactor is the pool-type one. As coolant it applies light water and as side reflector beryllium. The direction of water circulation in the core is upward. The core comprises 30 FA arranged as hexagonal lattice with the 90-95 mm pitch. The central materials channel and six loop channels are sited in the core. The reflector includes up to 11 loop channels. The reactor power is 100 MW. The average power density of the core is 0.4 MW/I (maximal value 1.0 MW/l). The maximum neutron flux density is 7.10 14 n/cm 2 s in the core (E>0.1 MeV), and 5.10 14 n/cm 2 s in the reflector (E<0.625 eV). In 1995 due to the lack of funding the MLR designing was suspended. (author)

  9. Nuclear reactor

    International Nuclear Information System (INIS)

    Shirakawa, Toshihisa.

    1979-01-01

    Purpose: To prevent cladding tube injuries due to thermal expansion of each of the pellets by successively extracting each of the control rods loaded in the reactor core from those having less number of notches, as well as facilitate the handling work for the control rods. Constitution: A recycle flow control device is provided to a circulation pump for forcibly circulating coolants in the reactor container and an operational device is provided for receiving each of the signals concerning number of notches for each of the control rods and flow control depending on the xenon poisoning effect obtained from the signals derived from the in-core instrument system connected to the reactor core. The operational device is connected with a control rod drive for moving each of the control rods up and down and a recycle flow control device. The operational device is set with a pattern for the aimed control rod power and the sequence of extraction. Upon extraction of the control rods, they are extracted successively from those having less notch numbers. (Moriyama, K.)

  10. Reactor container

    International Nuclear Information System (INIS)

    Hidaka, Masataka; Hatamiya, Shigeo; Kawasaki, Terufumi; Fukui, Toru; Suzuki, Hiroaki; Kataoka, Yoshiyuki; Kawabe, Ryuhei; Murase, Michio; Naito, Masanori.

    1990-01-01

    In order to suppress the pressure elevation in a reactor container due to high temperature and high pressure steams jetted out upon pipeway rupture accidents in the reactor container, the steams are introduced to a pressure suppression chamber for condensating them in stored coolants. However, the ability for suppressing the pressure elevation and steam coagulation are deteriorated due to the presence of inactive incondensible gases. Then, there are disposed a vent channel for introducing the steams in a dry well to a pressure suppression chamber in the reactor pressure vessel, a closed space disposed at the position lower than a usual liquid level, a first channel having an inlet in the pressure suppression chamber and an exit in the closed space and a second means connected by way of a backflow checking means for preventing the flow directing to the closed space. The first paths are present by plurality, a portion of which constitutes a syphon. The incondensible gases and the steams are discharged to the dry well at high pressure by using the difference of the water head for a long cooling time after the pipeway rupture accident. Then, safety can be improved without using dynamic equipments as driving source. (N.H.)

  11. Reactor core in FBR type reactor

    International Nuclear Information System (INIS)

    Masumi, Ryoji; Kawashima, Katsuyuki; Kurihara, Kunitoshi.

    1989-01-01

    In a reactor core in FBR type reactors, a portion of homogenous fuels constituting the homogenous reactor core is replaced with multi-region fuels in which the enrichment degree of fissile materials is lower nearer to the axial center. This enables to condition the composition such that a reactor core having neutron flux distribution either of a homogenous reactor core or a heterogenous reactor core has substantially identical reactivity. Accordingly, in the transfer from the homogenous reactor core to the axially heterogenous reactor core, the average reactivity in the reactor core is substantially equal in each of the cycles. Further, by replacing a portion of the homogenous fuels with a multi-region fuels, thereby increasing the heat generation near the axial center, it is possiable to reduce the linear power output in the regions above and below thereof and, in addition, to improve the thermal margin in the reactor core. (T.M.)

  12. Vegetarian Eco-feminist Consciousness in Carol Ann Duffy’s Poetry

    Directory of Open Access Journals (Sweden)

    Jie Zhou

    2015-07-01

    Full Text Available This paper discusses vegetarian eco-feminist consciousness in Carol Ann Duffy’s poetry by close analysis of two poems, namely “The Dolphins” and “A Healthy Diet” from her poem collection Standing Female Nude. The former is a dramatic monologue of a dolphin, which is exploited by people, and the latter is a dramatic monologue of an omnipotent observer in a restaurant. Both poems criticized the species-ism, and together, they showed the poet’s vegetarian eco-feminist consciousness. A close reading of the two poems from the eco-feminist perspective helps the reader understand why Carol Ann Duffy is honored as the first woman poet laureate in British history, and better understand vegetarian eco-feminism and its influence in British society. Keywords: eco-feminism; consciousness, species-ism, vegetarian, animal, diet

  13. Eco-balance of a vacuum insulation panel (VIP); Oekobilanz eines Vakuum-Isolations-Paneels (VIP)

    Energy Technology Data Exchange (ETDEWEB)

    Schonhardt, U.; Binz, A.; Wohler, M.; Dott, R. [Institut fuer Energie - Fachhochschule beider Basel, Muttenz (Switzerland); Frischknecht, R. [ESU-services, Uster (Switzerland)

    2003-07-01

    This report for the Swiss Federal Office of Energy (SFOE) made by the Institute for Energy at the University of Applied Sciences in Muttenz and ESU Services in Uster, Switzerland, presents the results of an eco-balance made on the ecological impact of vacuum insulation panels. These panels are being used more and more instead of bulky, traditional insulation materials. The three eco-balance models used - Eco-Indicator 99, Ecological Scarcity UBP 97 and Cumulative Energy Use KEA - are introduced. Comparisons were made between vacuum insulation systems and glass-fibre and polystyrene insulation materials. The methods used are described and the results of the eco-balance analyses made are presented for the three types of insulation. In an appendix to the report, the influence of power generation methods and transport services on the eco-balance is discussed.

  14. Enabling time-dependent uncertain eco-weights for road networks

    DEFF Research Database (Denmark)

    Hu, Jilin; Yang, Bin; Jensen, Christian S.

    2017-01-01

    travel costs. Based on the techniques above, different histogram aggregation methods are proposed to accurately estimate time-dependent GHG emissions for routes. Based on a 200-million GPS record data set collected from 150 vehicles in Denmark over two years, a comprehensive empirical study is conducted...... transportation. The foundation of eco-routing is a weighted-graph representation of a road network in which road segments, or edges, are associated with eco-weights that capture the GHG emissions caused by traversing the edges. Due to the dynamics of traffic, the eco-weights are best modeled as being time...... dependent and uncertain. We formalize the problem of assigning a time-dependent, uncertain eco-weight to each edge in a road network based on historical GPS records. In particular, a sequence of histograms is employed to describe the uncertain eco-weight of an edge at different time intervals. Compression...

  15. Pre-Service Teacher Opinions about Eco-Friendly Person Activity Package Developed to Raise Environmental Awareness

    Science.gov (United States)

    Candan, Sevcan; Erten, Sinan

    2015-01-01

    In this study, the effectiveness of Eco-Friendly Person Activity Package developed in order to raise environmental awareness in pre-service teachers and enable them to be an example of an eco-friendly teacher for their future students, and the responses about Eco-Friendly Person Activity Package were investigated. The study was conducted on 75…

  16. Redesigning the marketing mix for eco-friendly product consumption among non-purchasers in India

    Directory of Open Access Journals (Sweden)

    Chockalingam Senthil Nathan

    2016-04-01

    Full Text Available The present study was created in order to customise the marketing mix for non-purchasers of eco-friendly products by studying their perspectives on the introduction of eco-friendly variants of the regular products that they are using in particular product categories (personal care and home care. Overall previous literature reviews in this area imply that there is a gap in the scientific literature on the marketing mix formulation for converting non-purchasers into purchasers of eco-friendly products to augment eco-friendly product sales and adopt green marketing. As literature reviews had clearly indicated that green purchasers have a very low percentage when compared to non-purchasers, the purpose is to create new opportunities for successful green marketing as the study tries to convert non-purchasers into purchasers. We used descriptive research design to study a sample of 885 respondents, who were surveyed in 2 cities in the Tamil Nadu state in India, to acquire an in-depth understanding of consumer behaviour that would enable the consumption of eco-friendly products among non-purchasers. The results reveal the marketing mix requirement and the eco-friendly aspects needed by the non-purchasers in order to buy the eco-friendly variants. The research sheds light on the product, price and promotion components that will attract non-purchases of eco-friendly products to buy eco-friendly products, thus facilitating green marketing mix adaptation. The study will provide valuable input for further research in formulating the marketing mix necessary to enable consumption of eco-friendly products in different geographical locations and various product categories.

  17. Ecological Risk Assessment of Land Use Change in the Poyang Lake Eco-economic Zone, China

    Science.gov (United States)

    Xie, Hualin; Wang, Peng; Huang, Hongsheng

    2013-01-01

    Land use/land cover change has been attracting increasing attention in the field of global environmental change research because of its role in the social and ecological environment. To explore the ecological risk characteristics of land use change in the Poyang Lake Eco-economic Zone of China, an eco-risk index was established in this study by the combination of a landscape disturbance index with a landscape fragmentation index. Spatial distribution and gradient difference of land use eco-risk are analyzed by using the methods of spatial autocorrelation and semivariance. Results show that ecological risk in the study area has a positive correlation, and there is a decreasing trend with the increase of grain size both in 1995 and 2005. Because the area of high eco-risk value increased from 1995 to 2005, eco-environment quality declined slightly in the study area. There are distinct spatial changes in the concentrated areas with high land use eco-risk values from 1995 to 2005. The step length of spatial separation of land use eco-risk is comparatively long—58 km in 1995 and 11 km in 2005—respectively. There are still nonstructural factors affecting the quality of the regional ecological environment at some small-scales. Our research results can provide some useful information for land eco-management, eco-environmental harnessing and restoration. In the future, some measures should be put forward in the regions with high eco-risk value, which include strengthening land use management, avoiding unreasonable types of land use and reducing the degree of fragmentation and separation. PMID:23343986

  18. Eco-design pilot project in China - Monsoon offer 2 upgrade

    Science.gov (United States)

    Thai, Roselyne; Liu, Guoguo

    2017-11-01

    During COP21, Schneider Electric has committed that 100% of our new products would be eco-designed to tackle climate change. Launched in 2015, this initiative ecoDesign WayTM was tested on some pilot projects. This project covers the first ecoDesign WayTM pilot in China on an overvoltage or under voltage protective device used in both residential and industrial sectors, called Monsoon. Under the name ecoDesign WayTM, a method and a process have been deployed. The 3 main ecoDesign WayTM phases are: phase 1 - Marketing & Technique handshake, Phase 2 - ecoDesign WayTM follow-up and Phase 3 - Marketing communication. During the project, EIME from Bureau Veritas CODDE and ecoDesign WayTM scorecard from EVEA consulting are two core tools for eco-design implementation. They are respectively used for life cycle assessment and eco-design performance comparison. Thanks to the approach, compared to previous range, pollution emissions and resource depletion along the whole life cycle of product have decreased (reduction of 55% for energy depletion and 85% for water depletion). Global warming potential has dramatically decreased by 98.4% and air pollution by 33%. Meanwhile, the recycling rate has been improved by 18%, and recycled PA is used. The ecoDesign WayTM scorecard is stored as referent document for any customer request. Moreover, customers can access RoHS certificate, REACh declaration, PEP and EoLI in Check a product, an online environmental data repository, available 24/7.

  19. Molten salt reactors: reactor cores

    International Nuclear Information System (INIS)

    1983-01-01

    In this critical analysis of the MSBR I project are examined the problems concerning the reactor core. Advantages of breeding depend essentially upon solutions to technological problems like continuous reprocessing or graphite behavior under neutron irradiation. Graphite deformation, moderator unloading, control rods and core instrumentation require more studies. Neutronics of the core, influence of core geometry and salt composition, fuel evolution, and thermohydraulics are reviewed [fr

  20. Increased SRP reactor power

    International Nuclear Information System (INIS)

    MacAfee, I.M.

    1983-01-01

    Major changes in the current reactor hydraulic systems could be made to achieve a total of about 1500 MW increase of reactor power for P, K, and C reactors. The changes would be to install new, larger heat exchangers in the reactor buildings to increase heat transfer area about 24%, to increase H 2 O flow about 30% per reactor, to increase D 2 O flow 15 to 18% per reactor, and increase reactor blanket gas pressure from 5 psig to 10 psig. The increased reactor power is possible because of reduced inlet temperature of reactor coolant, increased heat removal capacity, and increased operating pressure (larger margin from boiling). The 23% reactor power increase, after adjustment for increased off-line time for reactor reloading, will provide a 15% increase of production from P, K, and C reactors. Restart of L Reactor would increase SRP production 33%

  1. Nuclear research reactors

    International Nuclear Information System (INIS)

    1985-01-01

    It's presented data about nuclear research reactors in the world, retrieved from the Sien (Nuclear and Energetic Information System) data bank. The information are organized in table forms as follows: research reactors by countries; research reactors by type; research reactors by fuel and research reactors by purpose. (E.G.) [pt

  2. Nuclear reactor physics course for reactor operators

    International Nuclear Information System (INIS)

    Baeten, P.

    2006-01-01

    The education and training of nuclear reactor operators is important to guarantee the safe operation of present and future nuclear reactors. Therefore, a course on basic 'Nuclear reactor physics' in the initial and continuous training of reactor operators has proven to be indispensable. In most countries, such training also results from the direct request from the safety authorities to assure the high level of competence of the staff in nuclear reactors. The aim of the basic course on 'Nuclear Reactor Physics for reactor operators' is to provide the reactor operators with a basic understanding of the main concepts relevant to nuclear reactors. Seen the education level of the participants, mathematical derivations are simplified and reduced to a minimum, but not completely eliminated

  3. ECO-INTELLIGENT TOOLS – A NECESSITY FOR SUSTAINABLE BUSINESSES

    Directory of Open Access Journals (Sweden)

    S. Nate

    2014-04-01

    Full Text Available Many of the challenges associated with sustainable development can be traced in the way modern society produces and consumes. Production, distribution and supply of goods and services require material and energy consumption, having an impact on natural resources both quantitatively and qualitatively, generating waste, pollution and disrupting ecosystems. Ecobusiness intelligence is the capacity of people, processes and applications / tools to organize business information, to facilitate consistent access to them and analyse them in order to improve management decisions, for better performance management of the organizations that are increasingly pressed to synchronize their processes and services with a sustainable development agenda, through the development, testing and implementation of decision support software. By adopting sustainable practices, eco – intelligent companies can gain added value, increase market share and boost shareholder value. Moreover, the growing demand for "green" products has created new markets and the visionary entrepreneurs already reap the rewards of approaching sustainability. Large and small companies are learning that sustainable business practices not only help the environment but also can improve profitability by pursuing higher efficiency, fewer harmful side-effects, and better relationships with the community and more. Gaining competitive advantage is a core concern of the companies and the existence of systems of identification, extraction and analysis of available data in a company, but also from the external environment, to provide real support for business decisions, is an essential ingredient of success. This paper highlights the necessity of eco-intelligent tools that help determining the organization's strategies, identifying the perceptions and capabilities of the competitors, analyzing the effectiveness of current operations, deploying long-term prospects for environmental action and establishing

  4. Soil stability and plant diversity in eco-engineering

    Science.gov (United States)

    Böll, Albert; Gerber, Werner; Rickli, Christian; Graf, Frank

    2010-05-01

    Slopes affected by superficial sliding and subsequently re-stabilised with eco-engineering measures were investigated, particularly related to soil stability and plant diversity. The sites are situated in three different areas of beech-fir-spruce forest associations of the higher montane zone of Switzerland. Climatic and site characteristics, in paraticular soil properties after the sliding event, of the three investigation areas are very similar. However, the number of species (shrubs and trees) used for the initial planting as well as the year of application of the eco-engineering measures differ substantially. In the investigation area Dallenwil-Wirzweli the biological measures taken in 1981 were restricted to one tree species, namely White Alder (Alnus incana). In Klosters, where measures were taken in 1983 as well as in the Arieschbach valley, where eco-engineering was applied in 1998, the initial planting consisted of 15 species either. Investigations in 2005/2006 revealed neither obvious differences among the three areas nor distinct correlations related to the diversity of the initial planting on the on hand and the development of the vegetation cover and soil stability on the other hand. During the available time of development, the soil aggregate stability increased by 30 to 39%. Compared to the corresponding climax association, the relative values of soil aggregate stability varied between 90 and 120%. Concurrently, the dry unit weight decreased between 1.1 and 3.1 kN/m3. The cumulative vegetation cover varied from 110 to 150%. Due to processes of soil development a distinct shift in the grain size distribution was noticed, from a well sorted gravel with clay and sand (GW-GC) to a silty gravel with sand (GM) in Dallenwil-Wirzweli and a silty to clayey gravel with sand (GC-GM) in Klosters and the Arieschbach valley. Furthermore, in all three investigation areas succession processes were observed that are comparable to average rates of natural secondary

  5. Nuclear reactor

    International Nuclear Information System (INIS)

    Jolly, R.

    1979-01-01

    The support grid for the fuel rods of a liquid metal cooled fast breeder reactor has a regular hexagonal contour and contains a large number of unit cells arranged honeycomb fashion. The totality of these cells make up a hexagonal shape. The grid contains a number of strips of material, and there is a window in each of three sidewalls staggered by one sidewall. The other sidewalls have embossed protrusions, thus generating a guide lining or guide bead. The windows reduce the rigidity of the areas in the middle between the ends of the cells. (DG) [de

  6. Nuclear reactor

    International Nuclear Information System (INIS)

    Anthony, A.J.; Gruber, E.A.

    1979-01-01

    A nuclear reactor with control rods in channels between fuel assemblies wherein the fuel assemblies incorporate guide rods which protrude outwardly into the control rod channels to prevent the control rods from engaging the fuel elements. The guide rods also extend back into the fuel assembly such that they are relatively rigid members. The guide rods are tied to the fuel assembly end or support plates and serve as structural members which are supported independently of the fuel element. Fuel element spacing and support means may be attached to the guide rods. 9 claims

  7. CHOICE Internal report I-4: The current status of ICT R&D&I for Chinese Eco-Cities

    OpenAIRE

    Owens, TJ; Itagaki, T

    2015-01-01

    This report attempts to give a flavour of the current of status of ICT R&D&I for Chinese Eco-cities and thereby provide some insights into the potential of China’s emerging market for Eco-city solutions for EU- China collaborative ICT R&D&I. It addresses Eco-city standards development in China. Evaluation Centres for Eco-City software solutions, the context into which ICT for Chinese Eco-cities fits, Chinese ICT R&D in smart cities, EU-China collaboration in ICT R&D smart cities, EU Member st...

  8. Gesture Decoding Using ECoG Signals from Human Sensorimotor Cortex: A Pilot Study

    Directory of Open Access Journals (Sweden)

    Yue Li

    2017-01-01

    Full Text Available Electrocorticography (ECoG has been demonstrated as a promising neural signal source for developing brain-machine interfaces (BMIs. However, many concerns about the disadvantages brought by large craniotomy for implanting the ECoG grid limit the clinical translation of ECoG-based BMIs. In this study, we collected clinical ECoG signals from the sensorimotor cortex of three epileptic participants when they performed hand gestures. The ECoG power spectrum in hybrid frequency bands was extracted to build a synchronous real-time BMI system. High decoding accuracy of the three gestures was achieved in both offline analysis (85.7%, 84.5%, and 69.7% and online tests (80% and 82%, tested on two participants only. We found that the decoding performance was maintained even with a subset of channels selected by a greedy algorithm. More importantly, these selected channels were mostly distributed along the central sulcus and clustered in the area of 3 interelectrode squares. Our findings of the reduced and clustered distribution of ECoG channels further supported the feasibility of clinically implementing the ECoG-based BMI system for the control of hand gestures.

  9. First Image Products from EcoSAR - Osa Peninsula, Costa Rica

    Science.gov (United States)

    Osmanoglu, Batuhan; Lee, SeungKuk; Rincon, Rafael; Fatuyinbo, Lola; Bollian, Tobias; Ranson, Jon

    2016-01-01

    Designed especially for forest ecosystem studies, EcoSAR employs state-of-the-art digital beamforming technology to generate wide-swath, high-resolution imagery. EcoSARs dual antenna single-pass imaging capability eliminates temporal decorrelation from polarimetric and interferometric analysis, increasing the signal strength and simplifying models used to invert forest structure parameters. Antennae are physically separated by 25 meters providing single pass interferometry. In this mode the radar is most sensitive to topography. With 32 active transmit and receive channels, EcoSARs digital beamforming is an order of magnitude more versatile than the digital beamforming employed on the upcoming NISAR mission. EcoSARs long wavelength (P-band, 435 MHz, 69 cm) measurements can be used to simulate data products for ESAs future BIOMASS mission, allowing scientists to develop algorithms before the launch of the satellite. EcoSAR can also be deployed to collect much needed data where BIOMASS satellite wont be allowed to collect data (North America, Europe and Arctic), filling in the gaps to keep a watchful eye on the global carbon cycle. EcoSAR can play a vital role in monitoring, reporting and verification schemes of internationals programs such as UN-REDD (United Nations Reducing Emissions from Deforestation and Degradation) benefiting global society. EcoSAR was developed and flown with support from NASA Earth Sciences Technology Offices Instrument Incubator Program.

  10. Assessment of Eco-Environmental Stress in the Western Taiwan Straits Economic Zone

    Directory of Open Access Journals (Sweden)

    Longyu Shi

    2015-03-01

    Full Text Available Eco-environmental stress refers to the pressure borne by the environment in sustaining the pre-existing non-industrialized state and/or in counteracting adverse impacts caused by natural and human factors. The present article introduces the concept, research progress, and method for assessing eco-environmental stress. An eco-environmental stress index (ESI is established to assess the eco-environmental stress of 13 cities in the Western Taiwan Straits Economic Zone (hereafter referred to as the Economic Zone during the period from 2000 to 2010. The research provides a reference for the strategic planning of industrial development and environmental protection. The results show that the overall eco-environmental stress of the Economic Zone was slight and did not have significant change during the past 10 years. The cities with the most severe eco-environmental stress are distributed in the north and south of the Economic Zone. Most areas of Fujian Province have a low degree of eco-environmental stress, a situation that is being constantly improved. The regions with high atmospheric and water pollutant emissions are concentrated in the northern, middle, and southern coastal regions of the Economic Zone. The pollutant emissions of coastal cities are higher than those of inland cities. In the future, ecological restoration and compensation mechanisms should be established for regions where environmental protection and remediation is urgently needed.

  11. Synthesis of Constructs for Modeling Consumers’ Understanding and Perception of Eco-Labels

    Directory of Open Access Journals (Sweden)

    Khan Md Raziuddin Taufique

    2014-04-01

    Full Text Available The term “eco-labeling” has become a buzzword in today’s sustainable business world. The use of eco-labeling in various forms has been increasing notably for past many years, sometimes as an environmental “requirement” and sometimes merely as a marketing tool. Questions arise about how well these eco-labels are attended and understood by consumers. However, though mentionable studies are found on various aspects of eco-labels, gaps exist in exploring an inclusive set of parameters for investigating consumer perceptions of eco-labels. This paper aims at preparing a synthesis of all the possible factors to be incorporated for measuring consumer perceptions of eco-labeling of products. For making such synthesis, all major works in the field have been thoroughly reviewed. The paper comes up with a total of 10 parameters that include consumer awareness, consumer knowledge, consumer involvement, consumer trust, design and visibility, credibility of the source, type and level of information, clarity of meaning, persuasiveness, and private benefits. This tentative, yet inclusive, set of parameters is thought to be useful for designing large scale future empirical researches for developing a dependable inclusive set of parameters to test consumer understanding and perceptions of eco-label. A framework is proposed for further empirical research.

  12. Italian electricity supply contracts optimization: ECO computer code

    International Nuclear Information System (INIS)

    Napoli, G.; Savelli, D.

    1993-01-01

    The ECO (Electrical Contract Optimization) code written in the Microsoft WINDOWS 3.1 language can be handled with a 286 PC and a minimum of RAM. It consists of four modules, one for the calculation of ENEL (Italian National Electricity Board) tariffs, one for contractual time-of-use tariffs optimization, a table of tariff coefficients, and a module for monthly power consumption calculations based on annual load diagrams. The optimization code was developed by ENEA (Italian Agency for New Technology, Energy and the Environment) to help Italian industrial firms comply with new and complex national electricity supply contractual regulations and tariffs. In addition to helping industrial firms determine optimum contractual arrangements, the code also assists them in optimizing their choice of equipment and production cycles

  13. Eco-districts and Social Housing in Northern Europe

    Directory of Open Access Journals (Sweden)

    Mario Losasso

    2012-10-01

    Full Text Available New districts and ‘eco-cities’ built between the '90s and 2000s in the Scandinavian countries and the UK, as well as in Germany, France, the Netherlands and in other European countries, represent a decisive overcoming of the experimental phase where the ecological housing was just an innovative approach limited to small pilot projects. In these districts the social housing is implemented according to percentages corresponding to the housing policies of the different countries. The role of technological choices and the characteristics of the building process have been crucial for building quality to reduce environmental impacts and to support and promote new ecologically oriented lifestyles and a wider social inclusion.

  14. MICP and Advances towards Eco-Friendly and Economical Applications

    Science.gov (United States)

    Rajasekar, Adharsh; Moy, Charles K. S.; Wilkinson, Stephen

    2017-07-01

    Biomineralization is a natural process aided by living organisms. Due to its applicability in ground improvement and bioremediation, Microbially Induced Calcite Precipitation (MICP) is an interdisciplinary field of study combining engineering, chemistry and microbiology. Bioremediation has been applied widely for contamination containment or removal, in this case it will be containment. MICP can also be applied to improve the efficiency of insitu bioremediation. Urease is an enzyme which can facilitate increased calcite precipitation. However the production of urease by bacteria and thus the resulting carbonate precipitation are inhibited by environmental factors including calcium concentration, bacterial concentration, pH and temperature. Under good conditions MICP can be used for heavy metal and radionuclide immobilization. However technologies such as bioconsolidation and biocementation require improvement such as time and cost. This paper highlights the application of MICP in addition to suggested improvements to make it more eco-friendly and sustainable.

  15. Eco-informatics for decision makers advancing a research agenda

    Science.gov (United States)

    Cushing, J.B.; Wilson, T.; Brandt, L.; Gregg, V.; Spengler, S.; Borning, A.; Delcambre, L.; Bowker, G.; Frame, M.; Fulop, J.; Hert, C.; Hovy, E.; Jones, J.; Landis, E.; Schnase, J.L.; Schweik, C.; Sonntag, W.; ,

    2005-01-01

    Resource managers often face significant information technology (IT) problems when integrating ecological or environmental information to make decisions. At a workshop sponsored by the NSF and USGS in December 2004, university researchers, natural resource managers, and information managers met to articulate IT problems facing ecology and environmental decision makers. Decision making IT problems were identified in five areas: 1) policy, 2) data presentation, 3) data gaps, 4) tools, and 5) indicators. To alleviate those problems, workshop participants recommended specific informatics research in modeling and simulation, data quality, information integration and ontologies, and social and human aspects. This paper reports the workshop findings, and briefly compares these with research that traditionally falls under the emerging eco-informatics rubric. ?? Springer-Verlag Berlin Heidelberg 2005.

  16. Play therapy in perspective theory of eco systemic therapy

    Directory of Open Access Journals (Sweden)

    Sofwan Adiputra

    2017-11-01

    Full Text Available Play therapy is a counseling approach for children applying toys, games, and other play media to communicate to the children "language." One of the Play therapy models that combine ecosystems as being formed by an inseparable reciprocal relationship between living things, and their environment is Eco systemic Play Therapy (EPT. Ecosystem Play Therapy as a hybrid model that integrates the concepts of science biology, several models of child psychotherapy, and developmental theories. This model is not eclectic. Rather, it is the integration of several models to create an independent model that is different from the sum of its parts. The focus of EPT is on the process of optimizing the implementation of the child's function as the context of the child's ecosystem or world. EPT is developed from a phenomenological philosophical perspective, in contrast to traditional perspectives.

  17. Eco-friendly Crosslinking Agent for Acid Functional Acrylic Resin

    Directory of Open Access Journals (Sweden)

    Archana Shah

    2009-01-01

    Full Text Available Oil from J. multifida was extracted and it was first converted into N,N-bis(2-hydroxyethyl Jatropha fatty amide (HEJFA. HEJFA has been synthesized by reaction between Jatropha oil and diethanol amine in presence of zinc oxide as a catalyst. The reaction is relatively rapid and proceeded to high yield at 200±5 OC. The resulting HEJFA was used to formulate thermosetting coating compositions. Films were cured at ambient (air drying and elevated (stove drying temperatures using N, N-bis(2-hydroxyethyl Jatropha fatty amide (HEJFA as eco-friendly crosslinking agent for acrylic resin. The coating performance of the various compositions was tested by measurement of scratch hardness, impact strength and chemical resistance. The results show better performance of the HEJFA based compositions compared to butylated melamine formaldehyde (MF based compositions.

  18. Nuclear power: an eco friendly energy source for sustainable development

    International Nuclear Information System (INIS)

    Obaidurrahman, K.; Singh, Om Pal

    2009-01-01

    When viewed from a large set of criteria such as abundance of energy resources, environmental impacts, low fuel inventory, quantum of waste generated and green house gas emissions, nuclear power can be considered as a large scale sustainable energy source. Among all energy sources, nuclear energy has perhaps the lowest impact on the environment, especially in relation to kilowatt-hr produced, because nuclear plants do not emit harmful gases and produce small quantity of waste. In other words, nuclear energy is the most environmental friendly electricity source. There are no significant adverse effects to water, land, habitat, species and air resources. The present paper discusses the sustainability and feasibility of nuclear power as an eco friendly energy source in the changing and challenging competitive power market. (author)

  19. Promoting green consumer behavior with eco-labels

    DEFF Research Database (Denmark)

    Thøgersen, John

    2002-01-01

    As a means to reduce the pollution and resource use following from consumption, attempts are made to motivate consumers to switch to less environmentally harmful and resource consuming products. One of the increasingly popular tools is to label the least harmful products in such a way that consum...... that consumers can distinguish them from others and, hence, are able to choose them. This paper reviews research on the effectiveness of eco-labels as a means to influence behavior and environmental outcomes.......As a means to reduce the pollution and resource use following from consumption, attempts are made to motivate consumers to switch to less environmentally harmful and resource consuming products. One of the increasingly popular tools is to label the least harmful products in such a way...

  20. Eco-friendly polymer nanocomposites processing and properties

    CERN Document Server

    Thakur, Vijay Kumar

    2015-01-01

    This book contains precisely referenced chapters, emphasizing environment-friendly polymer nanocomposites with basic fundamentals, practicality and alternatives to traditional nanocomposites through detailed reviews of different environmental friendly materials procured from different resources, their synthesis and applications using alternative green approaches. The book aims at explaining basics of eco-friendly polymer nanocomposites from different natural resources and their chemistry along with practical applications which present a future direction in the biomedical, pharmaceutical and automotive industry. The book attempts to present emerging economic and environmentally friendly polymer nanocomposites that are free from side effects studied in the traditional nanocomposites. This book is the outcome of contributions by many experts in the field from different disciplines, with various backgrounds and expertises. This book will appeal to researchers as well as students from different disciplines. The co...

  1. Nuclear reactors

    International Nuclear Information System (INIS)

    Prescott, R.F.; George, B.V.; Baglin, C.J.

    1979-01-01

    In a nuclear reactor (e.g. one having coolant down-flow through a core to a hearth below) thermal insulation (e.g. of a floor of the hearth) comprises a layer of bricks and a layer of tiles thereon, with smaller clearances between the tiles than between the bricks but with the bricks being of reduced cross-section immediately adjacent the tiles so as to be surrounded by interconnected passages, of relatively large dimensions, constituting a continuous chamber extending behind the layer of tiles. By this arrangement, lateral coolant flow in the inter-brick clearances is much reduced. The reactor core is preferably formed of hexagonal columns, supported on diamond-shaped plates each supported on a pillar resting on one of the hearth-floor tiles. Each plate has an internal duct, four upper channels connecting the duct with coolant ducts in four core columns supported by the plate, and lower channels connecting the duct to a downwardly-open recess common to three plates, grouped to form a hexagon, at their mutually-adjacent corners. This provides mixing, and temperature-averaging, of coolant from twelve columns

  2. Reactor container

    International Nuclear Information System (INIS)

    Oikawa, Hirohide; Otonari, Jun-ichiro; Tozaki, Yuka.

    1993-01-01

    Partition walls are disposed between a reactor pressure vessel and a suppression chamber to separate a dry well to an upper portion and a lower portion. A communication pipe is disposed to the partition walls. One end of the communication pipe is opened in an upper portion of the dry well at a position higher than a hole disposed to a bent tube of the suppression chamber. When coolants overflow from a depressurization valve by an erroneous operation of an emergency reactor core cooling device, the coolants accumulate in the upper portion of the dry well. When the pipeline is ruptured at the upper portion of the pressure vessel, only the inside of the pressure vessel and the upper portion of the dry well are submerged in water. In this case, the water level of the coolants does not elevate to the opening of the commuication pipe but they flow into the suppression chamber from the hole disposed to the bent tube. Since the coolants do not flow out to the lower portion of the dry well, important equipments such as control rod drives disposed at the lower portion of the dry wall can be prevented from submerging in water. (I.N.)

  3. Reactor monitor

    International Nuclear Information System (INIS)

    Takada, Tamotsu.

    1992-01-01

    The device of the present invention monitors a reactor so that each of the operations for the relocation of fuel assemblies and the withdrawal and the insertion of control rods upon exchange of fuel assemblies and control rods in the reactor. That is, when an operator conducts relocating operation by way of a fuel assembly operation section, the device of the present invention judges whether the operation indication is adequate or not, based on the information of control rod arrangement in a control rod memory section. When the operation indication is wrong, a stop signal is sent to a fuel assembly relocating device. Further, when the operator conducts control rod operation by way of a control rod operation section, the device of the present invention judges in the control rod withdrawal judging section, as to whether the operation indication given by the operator is adequate or not by comparing it with fuel assembly arrangement information. When the operation indication is wrong, a stop signal is sent to control rod drives. With such procedures, increase of nuclear heating upon occurrence of erroneous operation can be prevented. (I.S.)

  4. Nuclear reactors

    International Nuclear Information System (INIS)

    Matheson, J.E.

    1983-01-01

    A nuclear reactor has an upper and a lower grid plate. Protrusions project from the upper grid plate. Fuel assemblies having end fittings fit between the grid plates. An arrangement is provided for accepting axial forces generated during the operation of the nuclear reactor by the flow of the cooling medium and thermal expansion and irradiation-induced growth of the fuel assembly, which comprises rods. Each fuel assembly rests on the lower grid plate and its upper end is elastically supported against the upper grid plate by the above-mentioned arrangement. The arrangement comprises four (for example) torsion springs each having a torsion tube and a torsion bar nested within the torsion tube and connected at one end thereto. The other end of the torsion bar is connected to an associated one of four lever arms. The torsion tube is rigidly connected to the other end fitting and the springs are disposed such that the lever arms are biassed against the protrusions. (author)

  5. Reactor core fuel management

    International Nuclear Information System (INIS)

    Silvennoinen, P.

    1976-01-01

    The subject is covered in chapters, entitled: concepts of reactor physics; neutron diffusion; core heat transfer; reactivity; reactor operation; variables of core management; computer code modules; alternative reactor concepts; methods of optimization; general system aspects. (U.K.)

  6. Hybrid adsorptive membrane reactor

    Science.gov (United States)

    Tsotsis, Theodore T [Huntington Beach, CA; Sahimi, Muhammad [Altadena, CA; Fayyaz-Najafi, Babak [Richmond, CA; Harale, Aadesh [Los Angeles, CA; Park, Byoung-Gi [Yeosu, KR; Liu, Paul K. T. [Lafayette Hill, PA

    2011-03-01

    A hybrid adsorbent-membrane reactor in which the chemical reaction, membrane separation, and product adsorption are coupled. Also disclosed are a dual-reactor apparatus and a process using the reactor or the apparatus.

  7. Reactor outage schedule (tentative)

    Energy Technology Data Exchange (ETDEWEB)

    Walton, R.P.

    1969-11-01

    This single page document is the November 1, 1969 reactor refueling outage schedule for the Hanford Production Reactor. It also contains data on the amounts and types of fuels to be loaded and relocated in the production reactor.

  8. Reactor outage schedule (tentative)

    Energy Technology Data Exchange (ETDEWEB)

    Walton, R.P.

    1969-10-01

    This single page document is the October 1, 1969 reactor refueling outage schedule for the Hanford Production Reactor. It also contains data on the amounts and types of fuels to be loaded and relocated in the Production Reactor.

  9. Reactor outage schedule (tentative)

    Energy Technology Data Exchange (ETDEWEB)

    Walton, R.P.

    1969-10-15

    This single page document is the October 15, 1969 reactor refueling outage schedule for the Hanford Production Reactor. It also contains data on the amounts and types of fuels to be loaded and relocated in the Production Reactor.

  10. Reactor outage schedule (tentative)

    Energy Technology Data Exchange (ETDEWEB)

    Walton, R.P.

    1969-09-15

    This single page document is the September 15, 1969 reactor refueling outage schedule for the Hanford Production Reactor. It also contains data on the amounts and types of fuels to be loaded and relocated in the Production Reactor.

  11. Reactor outage schedule (tentative)

    Energy Technology Data Exchange (ETDEWEB)

    Walton, R.P.

    1969-12-15

    This single page document is the December 16, 1969 reactor refueling outage schedule for the Hanford Production Reactor. It also contains data on the amounts and types of fuels to be loaded and relocated in the Production reactor.

  12. Reactor outage schedule (tentative)

    Energy Technology Data Exchange (ETDEWEB)

    Walton, R.P.

    1969-12-01

    This single page document is the December 1, 1969 reactor refueling outage schedule for the Hanford Production Reactor. It also contains data on the amounts and types of fuels to be loaded and relocated in the Production reactor.

  13. Reactor theory and power reactors. 1. Calculational methods for reactors. 2. Reactor kinetics

    International Nuclear Information System (INIS)

    Henry, A.F.

    1980-01-01

    Various methods for calculation of neutron flux in power reactors are discussed. Some mathematical models used to describe transients in nuclear reactors and techniques for the reactor kinetics' relevant equations solution are also presented

  14. The eco-driving effect of electric vehicles compared to conventional gasoline vehicles

    Directory of Open Access Journals (Sweden)

    Hideki Kato

    2016-10-01

    Full Text Available Eco-driving is attractive to the public, not only users of internal-combustion-engine vehicles (ICEVs including hybrid electric vehicles (HEVs but also users of electric vehicles (EVs have interest in eco-driving. In this context, a quantitative evaluation of eco-driving effect of EVs was conducted using a chassis dynamometer (C/D with an “eco-driving test mode.” This mode comprised four speed patterns selected from fifty-two real-world driving datasets collected during an eco-driving test-ride event. The four patterns had the same travel distance (5.2 km, but showed varying eco-driving achievement levels. Three ICEVs, one HEV and two EVs were tested using a C/D. Good linear relationships were found between the eco-driving achievement level and electric or fuel consumption rate of all vehicles. The reduction of CO2 emissions was also estimated. The CO2-reduction rates of the four conventional (including hybrid vehicles were 10.9%–12.6%, while those of two types of EVs were 11.7%–18.4%. These results indicate that the eco-driving tips for conventional vehicles are effective to not only ICEVs and HEVs but also EVs. Furthermore, EVs have a higher potential of eco-driving effect than ICEVs and HEVs if EVs could maintain high energy conversion efficiency at low load range. This study is intended to support the importance of the dissemination of tools like the intelligent speed adaptation (ISA to obey the regulation speed in real time. In the future, also in the development and dissemination of automated driving systems, the viewpoint of achieving the traveling purpose with less kinetic energy would be important.

  15. Development of eco-friendly polymeric materials by radiation

    International Nuclear Information System (INIS)

    Choi, Jae-hak; Shim, Kihyung; Kim, Jaeyoung

    2012-12-01

    In this project, the core technologies such as fabrication of eco-friendly and high-performance bioplastics, anionic exchange membranes for the energy generation, and anisotropic conductive films (ACF) for the electronic devices were developed by using an eco-friendly and low-energy consumption radiation. In the 1 st project group, the fabrication technologies of biodegradable polymer-based blends, biocompoistes, and foam were developed using a radiation crosslinking technology, and the possibility of their commercialization was evaluated through the fabrication of prototype products (fruits packaging material and adhesive) in the practical production lines. In the 2 nd project group, the fabrication technology of the anion exchange membranes for alkaline fuel cell were prepared by utilizing the inherent property of radiation such as high ionizing energy and penetrating depth. The ion exchange capacity, ion conductivity, high ionizing energy and penetrating depth. The ion exchange capacity, ion conductivity, high ionizing energy and penetrating depth. The ion exchange capacity, ion conductivity, mechanical property, and chemical stability of the prepared membranes were measured. The results of the MEA performance test, the maximum power density of 115 mW and operation for 200 hours, indicates the possibility of the use of anion exchange membranes for alkaline fuel cell. In the 3rd project group, the electron beam-induced room temperature and fast curable epoxy was developed and the mechanism of electron beam-induced curing was investigated using various analytical methods. On the basis of the physical and electrical characterization, the prepared ACF exhibited lower resistance and higher tensile strength compared to that of the commercialized one

  16. Creating a Liveable City - Eco-services, Systems and Place

    Science.gov (United States)

    Hamilton, R. J.; Dean, M.; Birtles, P. J.; Hore, J.; Dahlenburg, J.

    2014-12-01

    The use of an ecosystem service framework for natural resource management has gained increasing traction in the public sector. This is of especial interest in cities as residual ecosystems - typically located along creeks and estuaries, or remaining in scattered pockets throughout the urban area - offer some of the highest value social and economic returns per capita for the land area they occupy, yet are often impractical to manage from more traditional approaches to conservation. We posit that the well-being of humans and other species is the outcome of healthy, functioning ecosystems, and that, from a policy perspective, it is essential to consider services in this context. We arrange ecosystem services into three categories: life-enabling, life-sustaining and life-fulfilling, in a modification to the categories of the Millennium Ecosystem Assessment, and identify additional eco-services unique to urban areas. At local scale, these contribute to the well-being of city residents and positively affect quality of life, forming essential elements of urban liveability. However, dynamics of co-located built and natural environments challenge the capacity of ecosystems to function and provide their full suite of services. Using Sydney as an example, we outline a modular framework of socio-ecological systems and places to show how eco-services supporting liveability can be considered in conceptual and physical space. At a policy level, framing systems-based management objectives that protect, improve and re-discover desirable ecosystem services within the city (as opposed to further increasing the environmental footprint outside), will allow for unique, positive, socially-enabling outcomes for urban centres, in Australia, and globally.

  17. Development of eco-friendly polymeric materials by radiation

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Jae-hak; Shim, Kihyung; Kim, Jaeyoung; and others

    2012-12-15

    In this project, the core technologies such as fabrication of eco-friendly and high-performance bioplastics, anionic exchange membranes for the energy generation, and anisotropic conductive films (ACF) for the electronic devices were developed by using an eco-friendly and low-energy consumption radiation. In the 1{sup st} project group, the fabrication technologies of biodegradable polymer-based blends, biocompoistes, and foam were developed using a radiation crosslinking technology, and the possibility of their commercialization was evaluated through the fabrication of prototype products (fruits packaging material and adhesive) in the practical production lines. In the 2{sup nd} project group, the fabrication technology of the anion exchange membranes for alkaline fuel cell were prepared by utilizing the inherent property of radiation such as high ionizing energy and penetrating depth. The ion exchange capacity, ion conductivity, high ionizing energy and penetrating depth. The ion exchange capacity, ion conductivity, high ionizing energy and penetrating depth. The ion exchange capacity, ion conductivity, mechanical property, and chemical stability of the prepared membranes were measured. The results of the MEA performance test, the maximum power density of 115 mW and operation for 200 hours, indicates the possibility of the use of anion exchange membranes for alkaline fuel cell. In the 3rd project group, the electron beam-induced room temperature and fast curable epoxy was developed and the mechanism of electron beam-induced curing was investigated using various analytical methods. On the basis of the physical and electrical characterization, the prepared ACF exhibited lower resistance and higher tensile strength compared to that of the commercialized one.

  18. Keeping it pure: could New Zealand be an eco paradise?

    Directory of Open Access Journals (Sweden)

    Ian Yeoman

    2015-03-01

    Full Text Available Purpose – The world is changing and key change agents include climate change and scarcity of resources. The purpose of this paper is to address how New Zealand and tourism could address the future and generate appropriate strategic responses. Design/methodology/approach – Using the process of scenario analysis and drawing upon recent research from the www.tourism2050.com project, this paper describes the circumstances, drivers, economic consequences and key decisions that New Zealand would have to take in order to position itself as an eco paradise. The background to the scenario presumes overarching behaviours in a cooperative world in which resources are scarce. Findings – The scenario portrays a future of collective individualism, where a high degree of personal freedom exists but within the constraints of a world in which there is a scarcity of resources. A communitarian ethos drives policy making with an emphasis on efficient resource use and waste minimisation. New Zealand is a nation favoured by climate change. Environmental intellectual property is one of the nation's key resources and in the spirit of achieving a global environmental equilibrium these technologies are shared with the rest of the world. Life is simple. Competitive individualism is equated with excess and resource waste, while cooperation, harmony, and the continuation of a global cooperative psyche are seen as the foundation stones of the continued, relatively comfortable survival of humanity. Tourism is a luxury and activities are environmentally ethical. Visitors are well-off, purposeful, highly respectful and careful to prove their worth. Originality/value – Eco paradise represents the classic tale of a prisoner's dilemma in which decision makers and consumers ponder the betterment of humankind against individualism. The scenario concludes with a strategic map of the core decisions New Zealand's tourism industry would have to take. The significance of the

  19. Who Manages Space? Eco-DRR and the Local Community

    Directory of Open Access Journals (Sweden)

    Syarifah Aini Dalimunthe

    2018-05-01

    Full Text Available The notion of ecosystem-based disaster risk reduction (DRR has only recently emerged in Indonesia. The Indonesian central government now adopts some policies related to ecosystem-based DRR with formal commitments from local administrations. At the implementation level, various activities have taken place, such as mangrove planting and restoration along the coastline to address the rising sea level and the “one billion trees” program to address the urgent issue of deforestation. These governmental activities have involved local communities that reside in the high-risk area, while nonlocal actors, particularly from the private and the nongovernmental sectors, have contributed as a third element to development. This paper examines space management in the context of Eco-DRR, paying special attention to uncertainty and anxiety in the local communities as the government and private sectors engage in development activities that have significant impacts on their present and future lives. The present study pursues this purpose by means of in-depth interview and focus group discussions (FGD with local leaders in mangrove planting and restoration programs. The study took place in a small island community in a part of the Jakarta Megapolitan Region, Indonesia. The results point out that the community feels left behind due to lack of trust in managing the conservation space. Another issue to be addressed is how to improve the democratization of environment management and livelihood base of the local community. Therefore, building confidence and ameliorating relationships between actors within/without the local community should lead to a better Eco-DRR initiative.

  20. Sustainable Eco Coastal Development Through Corporate Social Responsibility (CSR) Program

    Science.gov (United States)

    Rakhmanissazly, Arsi; Mursito Ardy, Yong; Abdullah

    2017-02-01

    Besides technical problems the company’s operational constraints that may effect high deficiency for the company is the company - community conflicts. Company - community conflict can also arise depends on the geographic conditions and characteristics of the community itself. Some studies has show that coastal community have higher level of social risk when compared to non-coastal community. Also, the coastal community ussually only rely on what sea provides as their main livelihood. Because of the level of education still contemtible the community couldn’t optimized the potential of their own area. Corporate Social Responsibility (CSR) har emerged as an important approach for addressing the social and environmental impact of company activities. Through CSR program, PT Pertamina EP Asset 3 Tambun Field (PEP) try to form value integration by utilizing resources from the community and the company by making sustainable eco - coastal living in Desa Tambaksari, Karawang, one of PEP working area. Using sustainable livelihood approach begin with compiling data by doing social mapping PEP has initiate the area to becoming Fish Processing Industry Centre. By implementing PDCA in every steps of the program, PEP has multiplied some other programs such as Organic Fish Feed Processing, Seaweed Farming and Waste Bank for Green Coastal Village. These program is PEP’s effort to create a sustainability environment by enhancing the community’s potentials as well as resolving social problems around Tambaksari. The most important result besides getting our license to operate from the community, is the community itself can grow into an eco coastal sustainable system.

  1. The CEA research reactors

    International Nuclear Information System (INIS)

    Schwartz, J.P.

    1993-01-01

    Two main research reactors, specifically designed, PEGASE reactor and Laue-Langevin high flux reactor, are presented. The PEGASE reactor was designed at the end of the 50s for the study of the gas cooled reactor fuel element behaviour under irradiation; the HFR reactor, was designed in the late 60s to serve as a high yield and high level neutron source. Historical backgrounds, core and fuel characteristics and design, flux characteristics, etc., are presented. 5 figs

  2. Atomic reactor thermal engineering

    International Nuclear Information System (INIS)

    Kim, Gwang Ryong

    1983-02-01

    This book starts the introduction of atomic reactor thermal engineering including atomic reaction, chemical reaction, nuclear reaction neutron energy and soon. It explains heat transfer, heat production in the atomic reactor, heat transfer of fuel element in atomic reactor, heat transfer and flow of cooler, thermal design of atomic reactor, design of thermodynamics of atomic reactor and various. This deals with the basic knowledge of thermal engineering for atomic reactor.

  3. Pilot Comparative Case Study on Eco-innovation Dynamics at firm level

    DEFF Research Database (Denmark)

    Yang, Yan; Du, Xiangyun; SHAO, Yunfei

    2010-01-01

    This paper pays special attention to eco-innovations dynamics at firm level. Triple helix twins are employed to disclose the complex collaborations within and across the case companies, as it provides us the possibilities of looking beyond the simpler, linear model of innovation and. Grundfos...... and environmental regulations. Dong Fang (China) is identified as a company at the very beginning of eco-innovation, as its compliance with environmental standards such as ISO 9001, ISO14001, OHSAS 18001 is absent at present; its collaborations with government and universities or research institutions...... helix twins and eco-innovation dynamics is addressed....

  4. Does Eco-efficency Reduce the Cost of Equity Capital? Empirical Evidence From Indonesia

    OpenAIRE

    Alviani, Lisa; Sholihin, Mahfud

    2015-01-01

    The objective of this study is to examine the effect of eco-efficiency on the cost of equity capital. The study hypothesizes that the implementation of eco-efficiency reduces the cost of equity capital. Using manufacturing companies listed on the Indonesian Stock Exchange for the period 2010-2012 as data, and controlling for beta, company size, Book to Market ratio, and leverage; the study finds that the implementation of eco-efficiency may reduce the cost of equity capital. The findings sugg...

  5. DOES ECO-EFFICENCY REDUCE THE COST OF EQUITY CAPITAL? EMPIRICAL EVIDENCE FROM INDONESIA

    OpenAIRE

    Lisa Alviani; Mahfud Sholihin

    2015-01-01

    The objective of this study is to examine the effect of eco-efficiency on the cost of equity capital. The study hypothesizes that the implementation of eco-efficiency reduces the cost of equity capital. Using manufacturing companies listed on the Indonesian Stock Exchange for the period 2010-2012 as data, and controlling for beta, company size, Book to Market ratio, and leverage; the study finds that the implementation of eco-efficiency may reduce the cost of equity capital. The findings sugg...

  6. MARKETING STRATEGY FOR START UP BUSINESS OF BROILER PEKING DUCK FARM WITH ECO-GREEN INTEGRATED

    OpenAIRE

    Silitonga N.; Syah T.Y.R.; Erni N.

    2018-01-01

    The increasing number and the rate of Banten population growth from year to year make it as a potential market which is quite large for the development of broiler duck farming business in the future. In this case, intensive system broiler Peking duck farming which is integrated, economic, and eco-green intensive, eco-green commonly utilizes Azolla microphylla and flour of pluchea leaves and other germ plasmas as the feed supplements. As a company in Peking duck farming with Eco Green concept,...

  7. Application of eco-exergy for assessment of ecosystem health and development of structurally dynamic models

    DEFF Research Database (Denmark)

    Zhang, J.; Gürkan, Zeren; Jørgensen, S.E.

    2010-01-01

    are developed using eco-exergy as the goal function, have been applied in explaining and exploring ecosystem properties and changes in community structure driven by biotic and abiotic factors. In this paper, we review the application of eco-exergy for the assessment of ecosystem health and development......Eco-exergy has been widely used in the assessment of ecosystem health, parameter estimations, calibrations, validations and prognoses. It offers insights into the understanding of ecosystem dynamics and disturbance-cl riven changes. Particularly, structurally dynamic models (SDMs), which...

  8. PREFACE: International Symposium on Materials Science and Innovation for Sustainable Society - Eco-Materials and Eco-Innovation for Global Sustainability - The 21st Iketani Conference 2011

    Science.gov (United States)

    Takahashi, Yasuo

    2012-08-01

    Conference logo The 21st century has been called the century of environmental revolution. Green innovations and environmentally friendly production systems based on physics, chemistry, materials science, and electronic engineering will be indispensable for ensuring renewable energy and establishing a sustainable society. In particular, production design, materials processing, and fabrication technologies such as welding and joining will be very important components of such green innovations. For these reasons, the International Symposium on Materials Science and Innovation for Sustainable Society - eco-materials and eco-innovation for global sustainability - (ECO-MATES 2011) was organized by the Joining and Welding Research Institute (JWRI) and the Center of Environmental Innovation Design for Sustainability (CEIDS), Osaka University. ECO-MATES 2011 was held at Hotel Hankyu Expo Park, Osaka, Japan from 28-30 November 2011. 435 participants from 20 countries around the world attended the symposium. 149 oral presentations including 60 invited talks and 160 posters were presented at the symposium to discuss the latest research and developments in green innovations in relation to environmental issues. The topics of the symposium covered all environmentally related fields including renewable energy, energy-materials, environment and resources, waste and biomass, power electronics, semiconductor, rare-earth metals, functional materials, organic electronics materials, electronics packaging, smart processing, joining and welding, eco-efficient processes, and green applied physics and chemistry. Therefore, 55 full papers concerning green innovations and environmentally benign production were selected and approved by the editorial board and the program committee of ECO-MATES 2011. All papers were accepted through peer review processes. I believe that all the papers have many informative contents. On behalf of the steering committee of the symposium, I would like to express

  9. Nuclear reactor types

    International Nuclear Information System (INIS)

    Jones, P.M.S.

    1987-01-01

    The characteristics of different reactor types designed to exploit controlled fission reactions are explained. Reactors vary from low power research devices to high power devices especially designed to produce heat, either for direct use or to produce steam to drive turbines to generate electricity or propel ships. A general outline of basic reactors (thermal and fast) is given and then the different designs considered. The first are gas cooled, including the Magnox reactors (a list of UK Magnox stations and reactor performance is given), advanced gas cooled reactors (a list of UK AGRs is given) and the high temperature reactor. Light water cooled reactors (pressurized water [PWR] and boiling water [BWR] reactors) are considered next. Heavy water reactors are explained and listed. The pressurized heavy water reactors (including CANDU type reactors), boiling light water, steam generating heavy water reactors and gas cooled heavy water reactors all come into this category. Fast reactors (liquid metal fast breeder reactors and gas cooled fast reactors) and then water-cooled graphite-moderated reactors (RBMK) (the type at Chernobyl-4) are discussed. (U.K.)

  10. Who Needs Cream and Sugar When There Is Eco-Labeling? Taste and Willingness to Pay for “Eco-Friendly” Coffee

    Science.gov (United States)

    Sörqvist, Patrik; Hedblom, Daniel; Holmgren, Mattias; Haga, Andreas; Langeborg, Linda; Nöstl, Anatole; Kågström, Jonas

    2013-01-01

    Participants tasted two cups of coffee, decided which they preferred, and then rated each coffee. They were told (in lure) that one of the cups contained “eco-friendly” coffee while the other did not, although the two cups contained identical coffee. In Experiments 1 and 3, but not in Experiment 2, the participants were also told which cup contained which type of coffee before they tasted. The participants preferred the taste of, and were willing to pay more for, the “eco-friendly” coffee, at least those who scored high on a questionnaire on attitudes toward sustainable consumer behavior (Experiment 1). High sustainability consumers were also willing to pay more for “eco-friendly” coffee, even when they were told, after their decision, that they preferred the non-labeled alternative (Experiment 2). Moreover, the eco-label effect does not appear to be a consequence of social desirability, as participants were just as biased when reporting the taste estimates and willingness to pay anonymously (Experiment 3). Eco labels not only promote a willingness to pay more for the product but also lead to a more favorable perceptual experience of it. PMID:24324623

  11. Who needs cream and sugar when there is eco-labeling? Taste and willingness to pay for "eco-friendly" coffee.

    Science.gov (United States)

    Sörqvist, Patrik; Hedblom, Daniel; Holmgren, Mattias; Haga, Andreas; Langeborg, Linda; Nöstl, Anatole; Kågström, Jonas

    2013-01-01

    Participants tasted two cups of coffee, decided which they preferred, and then rated each coffee. They were told (in lure) that one of the cups contained "eco-friendly" coffee while the other did not, although the two cups contained identical coffee. In Experiments 1 and 3, but not in Experiment 2, the participants were also told which cup contained which type of coffee before they tasted. The participants preferred the taste of, and were willing to pay more for, the "eco-friendly" coffee, at least those who scored high on a questionnaire on attitudes toward sustainable consumer behavior (Experiment 1). High sustainability consumers were also willing to pay more for "eco-friendly" coffee, even when they were told, after their decision, that they preferred the non-labeled alternative (Experiment 2). Moreover, the eco-label effect does not appear to be a consequence of social desirability, as participants were just as biased when reporting the taste estimates and willingness to pay anonymously (Experiment 3). Eco labels not only promote a willingness to pay more for the product but also lead to a more favorable perceptual experience of it.

  12. Who needs cream and sugar when there is eco-labeling? Taste and willingness to pay for "eco-friendly" coffee.

    Directory of Open Access Journals (Sweden)

    Patrik Sörqvist

    Full Text Available Participants tasted two cups of coffee, decided which they preferred, and then rated each coffee. They were told (in lure that one of the cups contained "eco-friendly" coffee while the other did not, although the two cups contained identical coffee. In Experiments 1 and 3, but not in Experiment 2, the participants were also told which cup contained which type of coffee before they tasted. The participants preferred the taste of, and were willing to pay more for, the "eco-friendly" coffee, at least those who scored high on a questionnaire on attitudes toward sustainable consumer behavior (Experiment 1. High sustainability consumers were also willing to pay more for "eco-friendly" coffee, even when they were told, after their decision, that they preferred the non-labeled alternative (Experiment 2. Moreover, the eco-label effect does not appear to be a consequence of social desirability, as participants were just as biased when reporting the taste estimates and willingness to pay anonymously (Experiment 3. Eco labels not only promote a willingness to pay more for the product but also lead to a more favorable perceptual experience of it.

  13. Minergie-Eco system audit - Results of the concept phase; Systemnachweis MINERGIE-ECO. Bericht ueber die Ergebnisse der Konzeptphase

    Energy Technology Data Exchange (ETDEWEB)

    Lenel, S.; Schinabeck, J.; Sigg, R. [Intep, Integrale Planung GmbH, Zuerich (Switzerland); Foradini, F. [E4tech Sarl, Lausanne (Switzerland); Citherlet, S. [Ecole d' Ingenieurs du Canton de Vaud (EIVD), Yverdon (Switzerland); Roulet, C.-A. [Swiss Federal Institute of Technology (EPFL), Laboratoire d' Energie Solaire et de Physique du Batiment (LESO-PB), Lausanne (Switzerland)

    2006-05-15

    This comprehensive report for the Swiss Federal Office of Energy (SFOE) presents the results of the concept phase of a project that developed a system-verification method for the Swiss Minergie-Eco label. This label considers not only energy aspects of building but also the materials used along with health aspects. Swiss and international standards that form the basis for the audit are described. The methods used and the work packages involved in the whole project are described and their implementation is discussed in detail. The framework for the software building-blocks to be developed is presented. The further project phases involved in the project are briefly discussed and the planned implementation time-scales are presented.

  14. Reactor safety

    International Nuclear Information System (INIS)

    Meneley, D.A.

    The people of Ontario have begun to receive the benefits of a low cost, assured supply of electrical energy from CANDU nuclear stations. This indigenous energy source also has excellent safety characteristics. Safety has been one of the central themes of the CANDU development program from its very beginning. A great deal of work has been done to establish that public risks are small. However, safety design criteria are now undergoing extensive review, with a real prospect of more stringent requirements being applied in the future. Considering the newness of the technology it is not surprising that a consensus does not yet exist; this makes it imperative to discuss the issues. It is time to examine the policies and practice of reactor safety management in Canada to decide whether or not further restrictions are justified in the light of current knowledge

  15. Nuclear reactor

    International Nuclear Information System (INIS)

    Schabert, H.P.; Weber, R.; Bauer, A.

    1975-01-01

    The refuelling of a PWR power reactor of about 1,200 MWe is performed by a transport pipe in the containment leading from an external to an internal fuel pit. A wagon to transport the fuel elements can go from a vertical loading position to an also vertical deloading position in the inner fuel pit via guide rollers. The necessary horizontal movement is effected by means of a cable line through the transport pipe which is inclined at least 10 0 . Gravity thus helps in the movement to the deloading position. The cable line with winch is fastened outside the containment. Swivelling devices tip the wagon from the horizontal to the vertical position or vice versa. Loading and deloading are done laterally. (TK/LH) [de

  16. Nuclear reactor

    International Nuclear Information System (INIS)

    Schweiger, F.; Glahe, E.

    1976-01-01

    In a nuclear reactor of the kind which is charged with spherical reaction elements and in which control rods are arranged to be thrust directly into the charge, each control rod has at least one screw thread on its external surface so that as the rod is thrust into the charge it is caused to rotate and thus make penetration easier. The length of each control rod may have two distinct portions, a latter portion which carries a screw thread and a lead-in portion which is shorter than the latter portion and which may carry a thread of greater pitch than that on the latter portion or may have a number of axially extending ribs instead of a thread

  17. Reactor container

    International Nuclear Information System (INIS)

    Furukawa, Hideyasu; Oyamada, Osamu; Uozumi, Hiroto.

    1976-01-01

    Purpose: To provide a container for a reactor provided with a pressure suppressing chamber pool which can prevent bubble vibrating load, particularly negative pressure generated at the time of starting to release exhaust from a main steam escape-safety valve from being transmitted to a lower liner plate of the container. Constitution: This arrangement is characterized in that a safety valve exhaust pool for main steam escape, in which a pressure suppressing chamber pool is separated and intercepted from pool water in the pressure suppressing chamber pool, a safety valve exhaust pipe is open into said safety valve exhaust pool, and an isolator member, which isolates the bottom liner plate in the pressure suppressing chamber pool from the pool water, is disposed on the bottom of the safety valve exhaust pool. (Nakamura, S.)

  18. Nuclear reactors

    International Nuclear Information System (INIS)

    Prescott, R.F.

    1976-01-01

    In the system described the fuel elements are arranged vertically in groups and are supported in such a manner as to tend to tilt them towards the center of the respective group, the fuel elements being urged laterally into abutment with one another. The elements have interlocking bearing pads, whereby lateral movement of adjacent elements is resisted; this improves the stability of the reactor core during refuelling operations. Fuel elements may comprise clusters of parallel fuel pins enclosed in a wrapper of hexagonal cross section, with bearing pads in the form of spline-like ribs located on each side of the wrapper and extending parallel to the longitudinal axis of the fuel element, being interlockable with ribs on pads of adjacent fuel elements. The arrangement is applicable to a reactor core in which fuel elements and control rod guide tubes are arranged in modules each of which comprises a cluster of at least three fuel elements, one of which is rigidly supported whilst the others are resiliently tilted towards the center of the cluster so as to lean on the rigidly supported element. It is also applicable to modules comprising a cluster of six fuel elements, each resiliently tilted towards a central void to form a circular arch. The modules may include additional fuel elements located outside the clusters and also resiliently tilted towards the central voids, the latter being used to accommodate control rod guide tubes. The need for separate structural members to act as leaning posts is thus avoided. Such structural members are liable to irradiation embrittlement, that could lead to core failure. (U.K.)

  19. Nuclear reactor neutron shielding

    Science.gov (United States)

    Speaker, Daniel P; Neeley, Gary W; Inman, James B

    2017-09-12

    A nuclear reactor includes a reactor pressure vessel and a nuclear reactor core comprising fissile material disposed in a lower portion of the reactor pressure vessel. The lower portion of the reactor pressure vessel is disposed in a reactor cavity. An annular neutron stop is located at an elevation above the uppermost elevation of the nuclear reactor core. The annular neutron stop comprises neutron absorbing material filling an annular gap between the reactor pressure vessel and the wall of the reactor cavity. The annular neutron stop may comprise an outer neutron stop ring attached to the wall of the reactor cavity, and an inner neutron stop ring attached to the reactor pressure vessel. An excore instrument guide tube penetrates through the annular neutron stop, and a neutron plug comprising neutron absorbing material is disposed in the tube at the penetration through the neutron stop.

  20. Eco-efficient Value Creation : An Alternative Perspective on Packaging and Sustainability

    NARCIS (Netherlands)

    Wever, R.; Vogtländer, J.

    2012-01-01

    The classical sustainability perspective on packaging is to reduce the environmental impact or eco burden of the packaging, using life cycle assessment to evaluate different design alternatives. Simultaneously, the classical marketing perspective on packaging is to generate value through

  1. LBA-ECO LC-15 Aerodynamic Roughness Maps of Vegetation Canopies, Amazon Basin: 2000

    Data.gov (United States)

    National Aeronautics and Space Administration — This data set, LBA-ECO LC-15 Aerodynamic Roughness Maps of Vegetation Canopies, Amazon Basin: 2000, provides physical roughness maps of vegetation canopies in the...

  2. Federal Highway Administration research and technology evaluation final report : Eco-Logical

    Science.gov (United States)

    2018-03-01

    This report documents an evaluation of Federal Highway Administrations (FHWA) Research and Technology Programs activities on the implementation of the Eco-Logical approach by State transportation departments and metropolitan planning organizati...

  3. Benchmarks for Developing Ecological Soil Screening Levels (ECO-SSL): Effects of Selenium on Soil Invertebrates

    National Research Council Canada - National Science Library

    Checkai, Ronald T; Simini, Michael; Kuperman, Roman; Phillips, Carlton T; Johnson, Dennis W; Higashi, Richard M; Fan, Teresa W-M; Sappington, Keith

    2004-01-01

    ...) for ecological receptors. Unfortunately data in the published literature were insufficient in quantity and quality to establish an Eco-SSL for selenium, critical in various DoD advanced technologies, and frequently...

  4. Eco-innovation Dynamics and Green Economic Change: the role of sectoral-specific patterns

    DEFF Research Database (Denmark)

    Andersen, Maj Munch; Faria, Lourenco

    2015-01-01

    This paper investigates the features of Green Economic Change process at the meso-level, the greening of industries. We posit that, as for “traditional” innovations, it is possible to identify sectoral eco-innovation patterns and that these represent key but neglected factors in the dynamics...... of green economic evolution. . The paper represents early speculative conceptual work. We have posited that, as for “general” innovations, it is possible to identify sectoral eco-innovation patterns and that these represent key but neglected factors in the dynamics of green economic chance. The paper...... identifies seven specific characteristics of eco-innovation which form the basis for identifying 4 core hypothesis which may explain sectoral heterogeneity and identify likely sectoral eco-innovation leaders....

  5. Addressing barriers to eco-innovation: Exploring the finance mobilisation functions of institutional innovation intermediaries

    NARCIS (Netherlands)

    Polzin, Friedemann; Flotow, von Paschen; Klerkx, L.W.A.

    2016-01-01

    This research article explores the role of institutional innovation intermediaries in accelerating the commercialisation of (clean) technologies. Drawing on the finance and innovation intermediaries literatures, we show that financial barriers to eco-innovation can be partly overcome by particular

  6. Eco-Schools and the Quality of Education in South Africa: Realising ...

    African Journals Online (AJOL)

    potential to improve conditions for teaching and learning. ... Do the Eco-School activities, made possible by the concerted efforts of the partners .... of discipline and strife among the staff, low motivation and morale, poor management and poor.

  7. Human motor cortical activity recorded with Micro-ECoG electrodes, during individual finger movements.

    Science.gov (United States)

    Wang, W; Degenhart, A D; Collinger, J L; Vinjamuri, R; Sudre, G P; Adelson, P D; Holder, D L; Leuthardt, E C; Moran, D W; Boninger, M L; Schwartz, A B; Crammond, D J; Tyler-Kabara, E C; Weber, D J

    2009-01-01

    In this study human motor cortical activity was recorded with a customized micro-ECoG grid during individual finger movements. The quality of the recorded neural signals was characterized in the frequency domain from three different perspectives: (1) coherence between neural signals recorded from different electrodes, (2) modulation of neural signals by finger movement, and (3) accuracy of finger movement decoding. It was found that, for the high frequency band (60-120 Hz), coherence between neighboring micro-ECoG electrodes was 0.3. In addition, the high frequency band showed significant modulation by finger movement both temporally and spatially, and a classification accuracy of 73% (chance level: 20%) was achieved for individual finger movement using neural signals recorded from the micro-ECoG grid. These results suggest that the micro-ECoG grid presented here offers sufficient spatial and temporal resolution for the development of minimally-invasive brain-computer interface applications.

  8. The evolution of shrinkage strain of pet-mortar composite eco ...

    African Journals Online (AJOL)

    ... resulting from the cement hydration and are governed by various physical and ... of PET volumetric additive amounts for cement substituting and for the behavior ... Keywords: Composite Eco-materials; Cement substitution; Shrinkage strain; ...

  9. Eco-Schools and the Quality of Education in South Africa: Realising ...

    African Journals Online (AJOL)

    Eco-Schools and the Quality of Education in South Africa: Realising the potential. ... Southern African Journal of Environmental Education. Journal Home · ABOUT THIS JOURNAL ... AJOL African Journals Online. HOW TO USE AJOL.

  10. EPA EcoBox Tools by Exposure Pathways - Exposure Pathways In ERA

    Science.gov (United States)

    Eco-Box is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases

  11. LBA-ECO LC-01 SRTM 90-Meter Digital Elevation Model, Northern Ecuadorian Amazon

    Data.gov (United States)

    National Aeronautics and Space Administration — This data set, LBA-ECO LC-01 SRTM 90-Meter Digital Elevation Model, Northern Ecuadorian Amazon, provides 90-meter resolution Digital Elevation Model data used in the...

  12. Redealing the cards: How an eco-industry modifies the political economy of environmental taxes

    International Nuclear Information System (INIS)

    Canton, Joan

    2008-01-01

    This article presents a combined economic-political model of environmental taxation setting. The model introduces a third lobby group - the lobby of an eco-industry - in addition to the traditional lobbies of polluting firms and environmentalists. Pressure groups interact to influence the environmental tax chosen by a regulator maximizing its chances of being reelected. The eco-industry lobby adds a new political contribution toward a higher environmental tax. The imperfectly competitive structure of the eco-industry also modifies the incentives of the usual lobbies. When the foreign environmental policy is constant, environmentalists can be in favor of a decrease in the local tax in order to reduce foreign pollution. We also discuss the formation of alliances between the eco-industry and one of the other lobbies and their potential impact. In general, the impact of lobbying activities on the politically optimal tax is ambiguous and depends on the relative concentration of each pressure group. (author)

  13. Roheline revolutsioon - ökosiki tagasitulek : well fashioned eco style in the UK

    Index Scriptorium Estoniae

    2006-01-01

    Loodussõbralikust moest, ökoloogilistest materjalidest, jätkusuutlikest tootmismeetoditest moetööstuses, rõivaste taaskasutamisest. Briti ökodisainerite loomingu näitusest "Well Fashioned: Eco Fashion in the UK" Londonis

  14. Predictive Eco-Cruise Control (ECC) system : model development, modeling and potential benefits.

    Science.gov (United States)

    2013-02-01

    The research develops a reference model of a predictive eco-cruise control (ECC) system that intelligently modulates vehicle speed within a pre-set speed range to minimize vehicle fuel consumption levels using roadway topographic information. The stu...

  15. Emergy and Eco-exergy Evaluation of Four Forest Restoration Modes

    Science.gov (United States)

    Four different forest restoration modes (Acacia mangium plantation, mixed-native species plantation, conifer plantation and Eucalyptus plantation) were evaluated using Energy System Theory and the emergy synthesis method. In addition, the eco-exergies of the four forest restorati...

  16. Community-based control of Aedes aegypti by adoption of eco ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    empower women and student communities to estab- lish a sustainable nature ... Control of Aedes aegypti by eco-health methods in Chennai. Pathogens and Global ... predominantly middle class with good/satisfactory housing — often of two ...

  17. How to Do It. Plant Eco-Physiology: Experiments on Crassulacean Acid Metabolism, Using Minimal Equipment.

    Science.gov (United States)

    Friend, Douglas J. C.

    1990-01-01

    Features of Crassulacean Acid Metabolism plants are presented. Investigations of a complex eco-physiological plant adaptation to the problems of growth in an arid environment are discussed. Materials and procedures for these investigations are described. (CW)

  18. D3.5 Report on ECO social network integration features

    NARCIS (Netherlands)

    Viñuales, Javier; Driesner, Jorge; Tejera, Sara; Tomasini, Alessandra; Loozen, Kjeld; Rocio, Vítor; Bohuschke, Felix; Ternier, Stefaan

    2016-01-01

    This document describes how integrations with social networks are being developed in ECO platforms. With these new features, participants will be able to share results and other contents through Facebook, Twitter, Google plus.

  19. Utilization of waste glass in ECO-cement: Strength properties and microstructural observations

    International Nuclear Information System (INIS)

    Sobolev, Konstantin; Tuerker, Pelin; Soboleva, Svetlana; Iscioglu, Gunsel

    2007-01-01

    Waste glass creates a serious environmental problem, mainly because of the inconsistency of the waste glass streams. The use of waste glass as a finely ground mineral additive (FGMA) in cement is a promising direction for recycling. Based on the method of mechano-chemical activation, a new group of ECO-cements was developed. In ECO-cement, relatively large amounts (up to 70%) of portland cement clinker can be replaced with waste glass. This report examines the effect of waste glass on the microstructure and strength of ECO-cement based materials. Scanning electron microscopy (SEM) investigations were used to observe the changes in the cement hydrates and interface between the cement matrix and waste glass particles. According to the research results, the developed ECO-cement with 50% of waste glass possessed compressive strength properties at a level similar to normal portland cement

  20. Eco-epidemiology of Novel Bartonella Genotypes from Parasitic Flies of Insectivorous Bats.

    NARCIS (Netherlands)

    Sándor, Attila D; Földvári, Mihály; Krawczyk, Aleksandra I; Sprong, Hein; Corduneanu, Alexandra; Barti, Levente; Görföl, Tamás; Estók, Péter; Kováts, Dávid; Szekeres, Sándor; László, Zoltán; Hornok, Sándor; Földvári, Gábor

    2018-01-01

    Bats are important zoonotic reservoirs for many pathogens worldwide. Although their highly specialized ectoparasites, bat flies (Diptera: Hippoboscoidea), can transmit Bartonella bacteria including human pathogens, their eco-epidemiology is unexplored. Here, we analyzed the prevalence and diversity

  1. Eco-socio Impact of Mineral Resource Mining in the Karamoja ...

    African Journals Online (AJOL)

    Eco-socio Impact of Mineral Resource Mining in the Karamoja Region of ... Oftentimes, the economic aspect of mining overshadows ecological and social needs in ... For that reason, Karamoja region has experienced violent ethnic conflicts, ...

  2. East African Journal of Sciences (2007) Volume l (1) 10-24 Eco ...

    African Journals Online (AJOL)

    Eco-geographic Distribution and Microcenters of Genetic Diversity in Faba Bean ... different regions, the nature and degree of both human and natural selections after introduction, and effects of ...... Resource Management in Practice: Enabling.

  3. Eco-Friendly Magnetic Iron Oxide Pillared Montmorillonite for Advanced Catalytic Degradation of Dichlorophenol

    Science.gov (United States)

    Eco-friendly pillared montmorillonites, in which the pillars consist of iron oxide are expected to have interesting and unusual magnetic properties that are applicable for environmental decontamination. Completely “green” and effective composite was synthesized using mild reactio...

  4. Eco-Bio-Social Approach to Dengue in Latin America and the ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2014-02-01

    This grant will support up to 10 studies of the ecosystem-related biological and social ("eco-bio-social") ... February 1, 2014 ... Entomological impact and social participation in dengue control : a cluster randomized trial in Fortaleza, Brazil.

  5. Research and Demonstration of‘Double-chain’Eco-agricultural Model Standardization and Industrialization

    Directory of Open Access Journals (Sweden)

    ZHANG Jia-hong

    2015-04-01

    Full Text Available According to agricultural resource endowment of Jiangsu Province, this paper created kinds of double-chain eco-agricultural model and integrated supporting system based on 'waterfowl, marine lives, aquatic vegetable and paddy rice', 'special food and economic crops with livestock’and‘special food and economic crops with livestock and marine lives’, which were suitable for extension and application in Jiangsu Province. Besides, it set 12 provincial standards and established preliminary technical standard system of‘double-chain’eco-agricultural model. In addition, it explored that‘the leading agricultural enterprises (agricultural co-operatives or family farms+demonstration zones+farmer households’was adopted as operating mechanism of industrialization of eco-agricultural model, which pushed forward rapid development of standardization and industrialization of‘double-chain’eco-agricultural model.

  6. Moving Towards Eco Cultural Tourism Village (A Case Study of Pondok Cabe Village

    Directory of Open Access Journals (Sweden)

    Rina Kurniawati

    2015-09-01

    Full Text Available This study identifies some eco-cultural tourism attraction potentials that exist in PondokCabeUdik Village Tangerang Selatan Indonesia. In addition, it investigates local people’s opinion on tourism development. The objective is to provide a preliminary overview of eco-tourism development. This study is a descriptive study that uses three types of instrument in data collection method, including questionnaire, interview and field observation. The data is then analyzed using SWOT analysis. The result indicated that natural potential include farming, lake and fish pond, and chicken hatchery. Cultural potentials include cultural diversity that depicted in praying houses and culinary. 194 respondents involved are the locals. The result showed thatthere is positive view from the local community on the availability of tourism potentials and development in the future. It is proposed that environmental awareness, education, ecotourism development, and consensus buildingare needed to implement eco cultural tourism concept. Keywords: Tourism, Eco-Cultural, Village, Planning and Development

  7. Consumer preferences for farmed organic salmon and eco-labelled wild salmon in Denmark1

    OpenAIRE

    Ankamah-Yeboah, Isaac; Asche, Frank; Bronnmann, Julia; Nielsen, Max; Nielsen, Rasmus

    2017-01-01

    Sustainably produced food products have rapidly grown in popularity within the last years. Eco-labeling systems to indicate the environmental sustainability of product have also been implemented in the seafood market, with the MSC label for wild fish as the leading one. However, it is not clear whether consumers really notice the values behind an eco-label and how important these attributes are in their purchasing decision. This study analyzes data from a large household scanner panel to inve...

  8. Eco-audit at the site of the nuclear power plants Isar 1 and Isar 2

    International Nuclear Information System (INIS)

    Brosche, D.

    2000-01-01

    The voluntary eco-audits for the nuclear power plants Isar 1 and 2 were the first ones for a nuclear power plant in Germany under the Council Eco Regulation of the European Commission and have shown that the environmental protection is actively practiced in accordance with the environmental policy of Bayernwerk AG. With the early integration of all partners and a careful planning, such audits can be performed efficiently and at a reasonable expenditure. (orig.) [de

  9. HUMAN CAPITAL IN ECO-ECONOMY AND SUSTAINABLE DEVELOPMENT OF ROMANIA

    OpenAIRE

    Ion PETRESCU

    2013-01-01

    The current modern civilization and, in this context, the Romanian one, faces a great challenge in finding the most effective and practical methods of implying the human capital in the process of ensuring the eco-economic progress and the sustainable development one in which people to live in communion with nature. In our communication we aim to analyze issues related to human capital involvement in eco-economy and sustainable development of Romania, based on the assessment of the impact of t...

  10. Eco-Tourism Potential and Development within Lake Nakuru National Park and its Catchment.

    OpenAIRE

    2004-01-01

    This report summarises the eco-tourism potentials within Lake Nakuru National Park and its catchment to promote environmental conservation and socio-economic development that involves community participation for poverty alleviation. The area is of immense importance both nationally and internationally with tremendous potential for eco-tourism development. Currently, the Park receives about 200,000 visitors per year, most of whom on average stay only for two nights. In the recent past minimal ...

  11. A STUDY ON FACTORS AFFECTING BUYING BEHAVIOUR OF CONSUMERS FOR ECO - FRIENDLY PRODUCTS

    OpenAIRE

    N. Anil Kumar; Dr. Mridanish Jha

    2017-01-01

    Products are not the only thing which can be eco-friendly and actions are also friendly to the environment. Several people think that eco-friendly products are only the first step, and that people who are actually dedicated to the environment also need to change their lifestyles, diminishing the quantum of resources they use by living more competently. The exploratory factor analysis shows that price, quality, value, trust and easy to use are the factors that affecting buying behaviour of con...

  12. Eco-friendly Retail Product Attributes, Customer Attributes and the Repurchase Intentions of South African Consumers

    OpenAIRE

    Job Dubihlela; Tandiswa Ngxukumeshe

    2016-01-01

    Purpose –Consumers are becoming progressively aware of the significance of eco-friendly activities, and their environmental consciousness drives them to consume eco-friendly products and services more, and prefer to support organisations that favor conservational practices. Increased environmental impacts bring a rise in concerns locally and globally, on sustainability issues aimed at reducing non-conservative consumption patterns. Retail organisations are increasingly developing and marketin...

  13. Marketing the Eco-Efficiency of a Finnish Product in Russia

    OpenAIRE

    Sattarova, Asiia

    2016-01-01

    The purpose of this qualitatitive research was to find the way for a Finnish company to market the eco-efficient characteristics as an advantage of their products and bring the message effectively to their consumers in Russia. The core objective was to create a strategic marketing plan; the goal was to work out an efficient strategy, practical marketing steps and effective solutions. The first theory part focused on the comparison of general eco-awareness in Europe and Russia. The part rev...

  14. Eco-Technology Licensing under Emission Tax: Royalty vs. Fixed-Fee

    OpenAIRE

    Seung-Leul Kim; Sang-Ho Lee

    2014-01-01

    This article considers the licensing strategies of eco-technology when an innovator provides pollution abatement goods to oligopolistic polluting firms that produce consumption goods and emit environmental pollutants. In the presence of emission tax, two types of licensing contracts, royalty and fixed-fee, are examined to analyze market equilibrium and to compare their welfare consequences. We show that an eco-innovator provides a non-exclusive license under a royalty contract while it might ...

  15. A model-based eco-routing strategy for electric vehicles in large urban networks

    OpenAIRE

    De Nunzio , Giovanni; Thibault , Laurent; Sciarretta , Antonio

    2016-01-01

    International audience; A novel eco-routing navigation strategy and energy consumption modeling approach for electric vehicles are presented in this work. Speed fluctuations and road network infrastructure have a large impact on vehicular energy consumption. Neglecting these effects may lead to large errors in eco-routing navigation, which could trivially select the route with the lowest average speed. We propose an energy consumption model that considers both accelerations and impact of the ...

  16. Approach to the regulation in spain for sustain-able constructions and eco-efficient solutions

    OpenAIRE

    Castilla Guerra, Jerónimo; Agudo Martínez, Andrés; Mercader-Moyano, Pilar (Coordinador)

    2017-01-01

    Is there any law related to sustainable buildings and eco-efficient solutions in Spain? How harmful effects on the environment caused by the building industry are regulated? The emergence of concepts such as sustainability or eco-efficiency in the mid-twentieth century has caused a deep impact in the building industry, changing traditional techniques, systems and procedures that have promoted research for the use of materials more efficient. All aimed at lessening the harmful ...

  17. ¿Quién es el culpable? La semiótica de Eco

    Directory of Open Access Journals (Sweden)

    Iván Oñate

    2015-01-01

    Full Text Available Este artículo aborda un aspecto por el cual Umberto Eco no se hizo mundialmente famoso, pero que sin lugar a dudas habla de su erudición y sin cuyos antecedentes su novelística no tendría determinadas características que la identifican. Este aspecto es el que fundamentalmente dice que Umberto Eco es un semiólogo.

  18. The Eco-Innovation Variables which Influence the Performance of Creative Industries Center of Natural Stone Crafts

    Directory of Open Access Journals (Sweden)

    Murti Astuti

    2018-01-01

    Full Text Available This study investigates the eco-innovation variable which has the significant effecton creative industries center’s performance of marble and natural stone craft sector in Tulungagung, Indonesia. The object of the study is the creative industries center with the non-renewable raw material. Mostly, the companies are in form of small and medium-sized enterprises (SMEs which is ‘passive eco-innovator’ and their eco-innovation variables have not been investigated before in terms of their influenceon their performance. The respondents were 81 craftsmen taken from the population. The data were collected through questionnaires which were tested, processed and analyzed by using Consistent Partial Least Square (PLSc. The eco-innovation variables which significantly effecton innovative performance are eco-organizational innovation and eco-product innovation. Eco-process innovation and eco-marketing innovation don’t directly affecton innovative performance, but its significant effecton eco-product innovation may influence innovative performance. Improving innovative performance will impact on financial performance through improvement of production performance, but market performance does not significantly affect financial performance. The findings of this study could be a reference for creative industries center’s of marble and natural stone craft sector to prioritize which type of eco-innovation should be improved so that its impact on performance is more significant

  19. FBR type reactor

    International Nuclear Information System (INIS)

    Kimura, Kimitaka; Fukuie, Ken; Iijima, Tooru; Shimpo, Masakazu.

    1994-01-01

    In an FBR type reactor for exchanging fuels by pulling up reactor core upper mechanisms, a connection mechanism is disposed for connecting the top of the reactor core and the lower end of the reactor core upper mechanisms. In addition, a cylindrical body is disposed surrounding the reactor core upper mechanisms, and a support member is disposed to the cylindrical body for supporting an intermediate portion of the reactor core upper mechanisms. Then, the lower end of the reactor core upper mechanisms is connected to the top of the reactor core. Same displacements are caused to both of them upon occurrence of earthquakes and, as a result, it is possible to eliminate mutual horizontal displacement between a control rod guide hole of the reactor core upper mechanisms and a control rod insertion hole of the reactor core. In addition, since the intermediate portion of the reactor core upper mechanisms is supported by the support member disposed to the cylindrical body surrounding the reactor core upper mechanisms, deformation caused to the lower end of the reactor core upper mechanisms is reduced, so that the mutual horizontal displacement with respect to the control rod insertion hole of the reactor core can be reduced. As a result, performance of control rod insertion upon occurrence of the earthquakes is improved, so that reactor shutdown is conducted more reliably to improve reactor safety. (N.H.)

  20. The prototype fast reactor

    International Nuclear Information System (INIS)

    Broomfield, A.M.

    1985-01-01

    The paper concerns the Prototype Fast Reactor (PFR), which is a liquid metal cooled fast reactor power station, situated at Dounreay, Scotland. The principal design features of a Fast Reactor and the PFR are given, along with key points of operating history, and health and safety features. The role of the PFR in the development programme for commercial reactors is discussed. (U.K.)

  1. Department of reactor technology

    International Nuclear Information System (INIS)

    1980-01-01

    The activities of the Department of Reactor Technology at Risoe during 1979 are described. The work is presented in five chapters: Reactor Engineering, Reactor Physics and Dynamics, Heat Transfer and Hydraulics, The DR 1 Reactor, and Non-Nuclear Activities. A list of the staff and of publications is included. (author)

  2. NCSU Reactor Sharing Program

    International Nuclear Information System (INIS)

    Perez, P.B.

    1993-01-01

    The Nuclear Reactor Program at North Carolina State University provides the PULSTAR Research Reactor and associated facilities to eligible institutions with support, in part, from the Department of Energy Reactor Sharing Program. Participation in the NCSU Reactor Sharing Program continues to increase steadily with visitors ranging from advance high school physics and chemistry students to Ph.D. level research from neighboring universities

  3. Reactor safety method

    International Nuclear Information System (INIS)

    Vachon, L.J.

    1980-01-01

    This invention relates to safety means for preventing a gas cooled nuclear reactor from attaining criticality prior to start up in the event the reactor core is immersed in hydrogenous liquid. This is accomplished by coating the inside surface of the reactor coolant channels with a neutral absorbing material that will vaporize at the reactor's operating temperature

  4. Assessing eco-efficiency: A metafrontier directional distance function approach using life cycle analysis

    International Nuclear Information System (INIS)

    Beltrán-Esteve, Mercedes; Reig-Martínez, Ernest; Estruch-Guitart, Vicent

    2017-01-01

    Sustainability analysis requires a joint assessment of environmental, social and economic aspects of production processes. Here we propose the use of Life Cycle Analysis (LCA), a metafrontier (MF) directional distance function (DDF) approach, and Data Envelopment Analysis (DEA), to assess technological and managerial differences in eco-efficiency between production systems. We use LCA to compute six environmental and health impacts associated with the production processes of nearly 200 Spanish citrus farms belonging to organic and conventional farming systems. DEA is then employed to obtain joint economic-environmental farm's scores that we refer to as eco-efficiency. DDF allows us to determine farms' global eco-efficiency scores, as well as eco-efficiency scores with respect to specific environmental impacts. Furthermore, the use of an MF helps us to disentangle technological and managerial eco-inefficiencies by comparing the eco-efficiency of both farming systems with regards to a common benchmark. Our core results suggest that the shift from conventional to organic farming technology would allow a potential reduction in environmental impacts of 80% without resulting in any decline in economic performance. In contrast, as regards farmers' managerial capacities, both systems display quite similar mean scores.

  5. A Sustainability Model for Bringing Core Villages into Eco-tourism

    Directory of Open Access Journals (Sweden)

    Öztan TUĞUN

    2014-12-01

    Full Text Available Eco villages comprise a part of eco-tourism in rural regions, and are the destination of choice for those who wish to experience a taste of traditional life. In 2004, through a series of by-laws, the Turkish Republic of Northern Cyprus (KKTC initiated an eco-tourism movement in the Karpaz Peninsula. It was envisioned then that a planning approach within the framework of sustainability would be of importance to the island, and the project was developed using a sustainable planning approach with a view to contributing to the state’s initiative to incorporate core villages into tourism on the island. Eco-tourism and the eco-village were explored within the framework of environmental problems, sustainable development and environmental sustainability, and the concept of core village was explained, with an emphasis on its benefits for tourism on the island. To ensure sustainability of the villages, a conceptual framework based on the principles of sustainable planning was established, specifically, in this case, on the Wheeler principles. These are grouped as: a. Compact, efficient land use, b. Less automobile use, better access, c. Efficient use of resources, reduction of pollution and waste, d. Restoration of natural systems, e. Good housing and living environments, f. Healthy social ecology, g. Sustainable economics, h. Community participation, i. Preservation of local culture and wisdom. These are used as cross references in assessing the situation in Büyükkonuk Village, the place nominated as the pilot area for eco-tourism.

  6. Assessing eco-efficiency: A metafrontier directional distance function approach using life cycle analysis

    Energy Technology Data Exchange (ETDEWEB)

    Beltrán-Esteve, Mercedes, E-mail: mercedes.beltran@uv.es [Department of Applied Economics II, University of Valencia (Spain); Reig-Martínez, Ernest [Department of Applied Economics II, University of Valencia, Ivie (Spain); Estruch-Guitart, Vicent [Department of Economy and Social Sciences, Polytechnic University of Valencia (Spain)

    2017-03-15

    Sustainability analysis requires a joint assessment of environmental, social and economic aspects of production processes. Here we propose the use of Life Cycle Analysis (LCA), a metafrontier (MF) directional distance function (DDF) approach, and Data Envelopment Analysis (DEA), to assess technological and managerial differences in eco-efficiency between production systems. We use LCA to compute six environmental and health impacts associated with the production processes of nearly 200 Spanish citrus farms belonging to organic and conventional farming systems. DEA is then employed to obtain joint economic-environmental farm's scores that we refer to as eco-efficiency. DDF allows us to determine farms' global eco-efficiency scores, as well as eco-efficiency scores with respect to specific environmental impacts. Furthermore, the use of an MF helps us to disentangle technological and managerial eco-inefficiencies by comparing the eco-efficiency of both farming systems with regards to a common benchmark. Our core results suggest that the shift from conventional to organic farming technology would allow a potential reduction in environmental impacts of 80% without resulting in any decline in economic performance. In contrast, as regards farmers' managerial capacities, both systems display quite similar mean scores.

  7. Industrial applications using BASF eco-efficiency analysis: perspectives on green engineering principles.

    Science.gov (United States)

    Shonnard, David R; Kicherer, Andreas; Saling, Peter

    2003-12-01

    Life without chemicals would be inconceivable, but the potential risks and impacts to the environment associated with chemical production and chemical products are viewed critically. Eco-efficiency analysis considers the economic and life cycle environmental effects of a product or process, giving these equal weighting. The major elements of the environmental assessment include primary energy use, raw materials utilization, emissions to all media, toxicity, safety risk, and land use. The relevance of each environmental category and also for the economic versus the environmental impacts is evaluated using national emissions and economic data. The eco-efficiency analysis method of BASF is briefly presented, and results from three applications to chemical processes and products are summarized. Through these applications, the eco-efficiency analyses mostly confirm the 12 Principles listed in Anastas and Zimmerman (Environ. Sci. Technol. 2003, 37(5), 94A), with the exception that, in one application, production systems based on bio-based feedstocks were not the most eco-efficient as compared to those based on fossil resources. Over 180 eco-efficiency analyses have been conducted at BASF, and their results have been used to support strategic decision-making, marketing, research and development, and communication with external parties. Eco-efficiency analysis, as one important strategy and success factor in sustainable development, will continue to be a very strong operational tool at BASF.

  8. Jordanian dentists' knowledge and implementation of eco-friendly dental office strategies.

    Science.gov (United States)

    Al Shatrat, Sabha M; Shuman, Deanne; Darby, Michele L; Jeng, Hueiwang A

    2013-06-01

    To investigate the implementation of eco-friendly dental office strategies by Jordanian dentists. Self-designed questionnaires were provided to 150 dentists working in private dental practices in the city of Amman, the capital of Jordan. Dentists' names and addresses were obtained from the Jordanian Dental Association. Overall, the level of knowledge about eco-friendly dental offices strategies was high for amalgam, radiology, paper waste, infection control and energy and water conservation. In terms of implementation, the majority of Jordanian dentists apply few eco-friendly dental offices strategies. The most frequently identified barriers to implementation of eco-friendly dental offices strategies were cost and lack of incentives from the government. Most Jordanian dental practices are not eco-friendly. A continued focus on the impact of dental practices on the environment is needed through formal and continuing dental education. Results of this study can guide policy development to encourage implementation of eco-friendly strategies. © 2013 FDI World Dental Federation.

  9. Adapting adaptation: the English eco-town initiative as governance process

    Directory of Open Access Journals (Sweden)

    Daniel Tomozeiu

    2014-06-01

    Full Text Available Climate change adaptation and mitigation have become key policy drivers in the UK under its Climate Change Act of 2008. At the same time, urbanization has been high on the agenda, given the pressing need for substantial additional housing, particularly in southeast England. These twin policy objectives were brought together in the UK government's 'eco-town' initiative for England launched in 2007, which has since resulted in four eco-town projects currently under development. We critically analyze the eco-town initiative's policy evolution and early planning phase from a multilevel governance perspective by focusing on the following two interrelated aspects: (1 the evolving governance structures and resulting dynamics arising from the development of the eco-town initiative at UK governmental level, and the subsequent partial devolution to local stakeholders, including local authorities and nongovernmental actors, under the new 'localism' agenda; and (2 the effect of these governance dynamics on the conceptual and practical approach to adaptation through the emerging eco-town projects. As such, we problematize the impact of multilevel governance relations, and competing governance strategies and leadership, on shaping eco-town and related adaptation strategies and practice.

  10. Eco-efficiency Analysis of Furniture Product Using Life Cycle Assessment

    Science.gov (United States)

    Rinawati, Dyah Ika; Sriyanto; Sari, Diana Puspita; Prayodha, Andana Cantya

    2018-02-01

    Furniture is one of Indonesia's main commodities strategically role in economic growth and employment in Indonesia. In their production process there many wastes resulted, such as such as sawdust, cuttings - pieces of wood, components that do not conform to specifications and the edges of wood from a log. Contrast with requirement of timber for furniture industries, availability of raw material sources decrease because of limited forest areas. Beside that, using electricity and chemical material in furniture production process have impact to environment. This study aim to assess the eco-cost and eco-efficiency ratio of the product so strategic recommendations to improve the eco-efficiency of products can be designed. The results of data processing showed the environmental costs of the furniture production process amount Rp 30.887.84. Eco-efficiency index of furniture products studied was 4,79 with the eco-efficiency ratio of 79,12%. This result means that the measured furniture products already profitable and sustainable, as well as its production process is already fairly efficient. However, improved performance of the production process can still be done to improve the eco-efficiency by minimizing the use of raw materials.

  11. Sustainability assessment of sugarcane biorefinery and molasses ethanol production in Thailand using eco-efficiency indicator

    International Nuclear Information System (INIS)

    Silalertruksa, Thapat; Gheewala, Shabbir H.; Pongpat, Patcharaporn

    2015-01-01

    Highlights: • Sugarcane biorefinery in Thailand is evaluated using the eco-efficiency concept. • Green cane along with cane trash use for electricity yields highest eco-efficiency. • Proposed biorefinery system increases eco-efficiency by 20–70%. - Abstract: The study aims to evaluate the sugarcane biorefinery and molasses ethanol production in Thailand using the combined environmental and economic sustainability indicator, so called “Eco-efficiency”. Four sugarcane biorefinery scenarios in Thailand are evaluated. The total output values (US$) and the life cycle greenhouse gas (GHG) emissions (kg CO_2eq) are selected as the indicators for characterizing economic and environmental performance, respectively. The results show that the biorefinery system of mechanized farming along with cane trash utilization for power generation yields the highest eco-efficiency. The benefits come from the increased value added of the biorefinery together with the decreased GHG emissions of the biorefinery system. As compared to the base case scenario, the new systems proposed result in the eco-efficiency improvement by around 20–70%. The biorefinery concept induces reduction of GHG emissions attributed to molasses ethanol. Green cane production and harvesting results in further lowering of the GHG emissions. Integration of sugarcane biomass utilization across the entire sugarcane complex would enhance the sustainability of the sugarcane production system.

  12. LCA as a Tool for Assessing Product and Process Oriented Eco-Innovations Undertaken by Enterprises

    Directory of Open Access Journals (Sweden)

    Rybaczewska-Błażejowska Magdalena

    2017-09-01

    Full Text Available This paper examines the application of life cycle assessment (LCA as an approach to foster the product and process oriented eco- innovation of enterprises, using the fruit and vegetable processing plant as an example. LCA, which is traditionally used to assess the impacts of a single product system on the environment, was applied in the enterprise context. This was made possible by forming an indicator describing the environmental profile of an enterprise, which is calculated by the sum of the multiplication of the environmental impact assessment (LCIA results for individual unit processes within a particular impact category and their weights reflecting the structure of production in an enterprise. In order to distinguish and indicate the direction in which an enterprise should undertake its eco-innovative actions (implementing eco-innovations within the product or production process the LCIA results are presented individually for products and production processes. The research was conducted in full compliance with the LCA methodology. LCA proved that the analysed enterprise has the largest negative impacts on the environment in the following impact categories: marine eco-toxicity, freshwater eco-toxicity, freshwater eutrophication, human toxicity and natural land transformation. They result primarily from the consumption of thermal and electric energy in the production processes. Therefore, to improve energy efficiency, the enterprise should take eco-innovative actions in the processes applied.

  13. Can More Environmental Information Disclosure Lead to Higher Eco-Efficiency? Evidence from China

    Directory of Open Access Journals (Sweden)

    Yantuan Yu

    2018-02-01

    Full Text Available The present paper investigates the impact of pollution information transparency index (PITI on eco-efficiency using a novel panel dataset covering 109 key environmental protection prefecture-level cities in China over the period 2008–2015. We apply an extended data envelopment analysis (DEA model, simultaneously incorporating metafrontier, undesirable outputs and super efficiency into slack-based measure (Meta-US-SBM to estimate eco-efficiency. Then, the bootstrap Granger causality approach is utilized to test the unidirectional Granger causal relationship running from PITI to eco-efficiency. Results of DEA model show that there exist significant spatiotemporal disparities of eco-efficiency, on average, the eco-efficiency in eastern region is relative higher than those of central/western region. Estimates of ordinary least square (OLS method, quantile regression, and spatial Durbin model document that the evidence of an inverted-U-shaped relation between PITI and eco-efficiency is supported, and the turning points vary from 0.3370 to 0.4540 with different model specifications. Finally, supplementary analysis of panel threshold model also supports the robust findings. Policy implications are presented based on the empirical results.

  14. Eco-innovative Practices for Sustainable Consumption and Production: What are the Possible Benefits for Companies?

    Directory of Open Access Journals (Sweden)

    Maria Rosa De Giacomo

    2014-07-01

    Full Text Available The paper aims to present some eco-innovative practices regarding Sustainable Consumption and Production (SCP. The study also focuses on potential benefits for the actors who implement these practices, mainly with reference to companies. After a literature review on the actual importance of SCP and on the effects of eco-innovation tools and policies on companies, authors present the developed eco-innovation practices in three focus areas related to sustainable consumption and production. The aim of the study is to contribute to literature studies on SCP with the development of eco-innovative practices resulting by the integration of existing tools, by pointing out and valorizing their potentials and synergies. These practices have been pointing out in the framework of the international European project. Three focus areas are involved by the practices: sustainability of products and services, sustainability of production processes and sustainable management of industrial areas. Authors developed four eco innovative practices resulting from the integration of 15 existing tools. These practices offer many opportunities to many actors, mainly companies and public authorities, in order to achieve environmental and competitive benefits and implement eco-innovation principles with a cooperative and shared approach.

  15. Eco-efficiency Analysis of Furniture Product Using Life Cycle Assessment

    Directory of Open Access Journals (Sweden)

    Ika Rinawati Dyah

    2018-01-01

    Full Text Available Furniture is one of Indonesia’s main commodities strategically role in economic growth and employment in Indonesia. In their production process there many wastes resulted, such as such as sawdust, cuttings - pieces of wood, components that do not conform to specifications and the edges of wood from a log. Contrast with requirement of timber for furniture industries, availability of raw material sources decrease because of limited forest areas. Beside that, using electricity and chemical material in furniture production process have impact to environment. This study aim to assess the eco-cost and eco-efficiency ratio of the product so strategic recommendations to improve the eco-efficiency of products can be designed. The results of data processing showed the environmental costs of the furniture production process amount Rp 30.887.84. Eco-efficiency index of furniture products studied was 4,79 with the eco-efficiency ratio of 79,12%. This result means that the measured furniture products already profitable and sustainable, as well as its production process is already fairly efficient. However, improved performance of the production process can still be done to improve the eco-efficiency by minimizing the use of raw materials.

  16. Physics of nuclear reactors

    International Nuclear Information System (INIS)

    Baeten, Peter

    2006-01-01

    This course gives an introduction to Nuclear Reactor Physics. The first chapter explains the most important parameters and concepts in nuclear reactor physics such as fission, cross sections and the effective multiplication factor. Further on, in the second chapter, the flux distributions in a stationary reactor are derived from the diffusion equation. Reactor kinetics, reactor control and reactor dynamics (feedback effects) are described in the following three chapters. The course concludes with a short description of the different types of existing and future reactors. (author)

  17. Reactor core and initially loaded reactor core of nuclear reactor

    International Nuclear Information System (INIS)

    Koyama, Jun-ichi; Aoyama, Motoo.

    1989-01-01

    In BWR type reactors, improvement for the reactor shutdown margin is an important characteristic condition togehter with power distribution flattening . However, in the reactor core at high burnup degree, the reactor shutdown margin is different depending on the radial position of the reactor core. That is , the reactor shutdown margin is smaller in the outer peripheral region than in the central region of the reactor core. In view of the above, the reactor core is divided radially into a central region and as outer region. The amount of fissionable material of first fuel assemblies newly loaded in the outer region is made less than the amount of the fissionable material of second fuel assemblies newly loaded in the central region, to thereby improve the reactor shutdown margin in the outer region. Further, the ratio between the amount of the fissionable material in the upper region and that of the fissionable material in the lower portion of the first fuel assemblies is made smaller than the ratio between the amount of the fissionable material in the upper region and that of the fissionable material in the lower region of the second fuel assemblies, to thereby obtain a sufficient thermal margin in the central region. (K.M.)

  18. Nuclear reactors. Introduction

    International Nuclear Information System (INIS)

    Boiron, P.

    1997-01-01

    This paper is an introduction to the 'nuclear reactors' volume of the Engineers Techniques collection. It gives a general presentation of the different articles of the volume which deal with: the physical basis (neutron physics and ionizing radiations-matter interactions, neutron moderation and diffusion), the basic concepts and functioning of nuclear reactors (possible fuel-moderator-coolant-structure combinations, research and materials testing reactors, reactors theory and neutron characteristics, neutron calculations for reactor cores, thermo-hydraulics, fluid-structure interactions and thermomechanical behaviour of fuels in PWRs and fast breeder reactors, thermal and mechanical effects on reactors structure), the industrial reactors (light water, pressurized water, boiling water, graphite moderated, fast breeder, high temperature and heavy water reactors), and the technology of PWRs (conceiving and building rules, nuclear parks and safety, reactor components and site selection). (J.S.)

  19. Thermonuclear reactor

    International Nuclear Information System (INIS)

    Yasutomi, Yoshiyuki; Nakagawa, Moroo; Sawai, Yuichi; Chiba, Akio; Suzuki, Yasutaka.

    1997-01-01

    Silicon composited with reinforcing metals is used for a divertor cooling substrate having an effect as a cooling tube to provide a silicon base composite material having increased electric resistance and toughness. The blending ratio of reinforcing materials in the form of granules, whiskers or long fibers is controlled in order to control heat conductivity, electric resistivity and mechanical performances. The divertor cooling substrate comprising the silicon base composite material is integrated with a plasma facing material. The production method therefor includes ordinary metal matrix composite forming methods such as powder metallurgy, melting penetration method, high pressure solidification casting method, centrifugal casting method and vacuum casting method. Since the cooling plate is constituted with the light metal and highly electric resistant metal base composite material, sharing force due to eddy current can be reduced, and radiation exposure can be minimized. Accordingly, a cooling structure for a thermonuclear reactor effective for the improvement of environmental problems caused by waste disposal can be attained. (N.H.)

  20. Nuclear reactor

    International Nuclear Information System (INIS)

    Irion, L.; Tautz, J.; Ulrych, G.

    1976-01-01

    This additional patent complements the arrangement of non-return valves to prevent loss of cooling water on fracture of external tubes in the main coolant circuit (according to PS 24 24 427.7) by ensuring that the easily movable valves only operate in case of a fault, but do not flutter in operation, because the direction of flow is not the same at each location where they are installed. The remedy for this undesirable effect consists of allocating 1 non-return valve unit with 5 to 10 valves to each (of several) ducts for the cooling water intake. These units are installed in the annular space between the reactor vessel and the pressure vessel below the inlet of the ducts. Due to flow guidance surfaces in the same space, the incoming cooling water is deflected downwards and as the guiding surfaces are closed at the sides, must pass parallel to the valves of the non-return valve unit. On fracture of the external cooling water inlet pipe concerned, all valves of this unit close due to reversal of flow on the outlet side. (TK) [de

  1. Nuclear reactors

    International Nuclear Information System (INIS)

    Pearson, K.G.

    1977-01-01

    Reference is made to auxiliary means of cooling the nuclear fuel clusters used in light or heavy water cooled nuclear reactors. One method is to provide one or more spray cooling tubes. From holes in the side walls of those tubes coolant water may be sprayed laterally into the cluster against the rods. The flow of main coolant may thus be supplemented or even replaced by the auxiliary coolant. A difficulty, however, is that only those fuel rods close to a spray cooling tube can readily be reached by the auxiliary coolant. In the arrangement described, where the fuel rods are spaced apart by transverse grids, at least one of the interspaces between the grids is provided with an axially extending auxiliary coolant conduit having lateral holes through which an auxiliary coolant is sprayed into the cluster. A deflector is provided that extends from a transverse grid into a position in front of the holes and deflects auxiliary coolant on to parts of the fuel rods otherwise inaccessible to the auxiliary coolant. The construction of the deflector is described. (U.K.)

  2. Nuclear reactor coolant channels

    International Nuclear Information System (INIS)

    Macbeth, R.V.

    1978-01-01

    A nuclear reactor coolant channel is described that is suitable for sub-cooled reactors as in pressurised water reactors as well as for bulk boiling, as in boiling water reactors and steam generating nuclear reactors. The arrangement aims to improve heat transfer between the fuel elements and the coolant. Full constructional details are given. See also other similar patents by the author. (U.K.)

  3. Fast breeder reactors

    International Nuclear Information System (INIS)

    Heinzel, V.

    1975-01-01

    The author gives a survey of 'fast breeder reactors'. In detail the process of breeding, the reasons for the development of fast breeders, the possible breeder reactors, the design criteria, fuels, cladding, coolant, and safety aspects are reported on. Design data of some experimental reactors already in operation are summarized in stabular form. 300 MWe Prototype-Reactors SNR-300 and PFR are explained in detail and data of KWU helium-cooled fast breeder reactors are given. (HR) [de

  4. Eco-friendly aqueous core surface-modified nanocapsules.

    Science.gov (United States)

    Carbone, C; Musumeci, T; Lauro, M R; Puglisi, G

    2015-01-01

    In this work, positively charged nanocapsules have been developed for potential ocular delivery exploiting the deposition of PLA onto the droplet surface of a W/O nanoemulsion prepared by the reversed procedure of the PIT method. PLA in combination with different amounts of various oils and surfactants have been studied in order to select the best formulation for polymeric nanocapsule preparation. The traditional visual observation together with the Turbiscan(®) technology were exploited in order to identify the best combination of polymer/oil for nanocapsule preparation. Two different primary surfactants (Span(®) 60 and Span(®) 80) have been tested to select their influence on the field of existence of the nanoemulsion by the construction of the pseudoternary phase diagrams. Cationic hybrid NC have been prepared by the addition of a coating layer of DDAB. The physico-chemical and morphological properties of all the prepared nanocapsules have been evaluated and compared by PCS, DSC and AFM. Therefore, positively charged nanocapsules can be easily prepared by a simple eco-friendly technique that exploits biocompatible materials avoiding a large input of mechanical energy as a potential ocular delivery systems for hydrophilic compounds or gene materials. Copyright © 2014 Elsevier B.V. All rights reserved.

  5. The Eco Logic gas-phase chemical reduction process

    International Nuclear Information System (INIS)

    Hallett, D.J.; Campbell, K.R.

    1994-01-01

    Since 1986, Eco Logic has conducted research with the aim of developing a new technology for destroying aqueous organic wastes, such as contaminated harbor sediments, landfill soil and leachates, and lagoon sludges. The goal was a commercially-viable chemical process that could deal with these watery wastes and also process stored wastes. The process described in this paper was developed with a view to avoiding the expense and technical drawbacks of incinerators, while still providing high destruction efficiencies and waste volume capabilities. A lab-scale process unit was constructed in 1988 and tested extensively. Based on the results of these tests, it was decided to construct a mobile pilot-scale unit that could be used for further testing and ultimately for small commercial waste processing operations. It was taken through a preliminary round of tests at Hamilton Harbour, Ontario, where the waste processed was coal-tar-contaminated harbor sediment. In 1992, the same unit was taken through a second round of tests in Bay City, Michigan. In this test program, the pilot-scale unit processed PCBs in aqueous, organic and soil matrices. This paper describes the process reactions and the pilot-scale process unit, and presents the results of pilot-scale testing thus far

  6. Research highlights in energy and eco-efficient built environment

    Energy Technology Data Exchange (ETDEWEB)

    Airaksinen, M. (ed.)

    2012-06-15

    This publication presents a compilation of VTT's recent research on energy and eco-efficient built environment. Sustainability as a dominating driver of technology development can also be seen in the R and D portfolio of VTT Technical Research Centre of Finland. A clear focus of our research for the building sector is sustainable construction, particularly the energy efficiency of the built environment. Buildings and the whole built environment are in a key role when societies are mitigating climate change and adapting to its consequences. Despite the temporary economic downturn, construction globally remains one of the most significant areas of human activities globally. Due to the urgency of measures related to climate change and the need to provide a proper environment for living and working, a large number of national and international measures have been agreed to guarantee the future development of sustainable built environment for all. Indirectly, this has lead to a need to develop existing and completely new technologies and processes for the built environment with a speed faster than ever and with a more holistic performance metrics than ever.

  7. Expanding the eco-evolutionary context of herbicide resistance research.

    Science.gov (United States)

    Neve, Paul; Busi, Roberto; Renton, Michael; Vila-Aiub, Martin M

    2014-09-01

    The potential for human-driven evolution in economically and environmentally important organisms in medicine, agriculture and conservation management is now widely recognised. The evolution of herbicide resistance in weeds is a classic example of rapid adaptation in the face of human-mediated selection. Management strategies that aim to slow or prevent the evolution of herbicide resistance must be informed by an understanding of the ecological and evolutionary factors that drive selection in weed populations. Here, we argue for a greater focus on the ultimate causes of selection for resistance in herbicide resistance studies. The emerging fields of eco-evolutionary dynamics and applied evolutionary biology offer a means to achieve this goal and to consider herbicide resistance in a broader and sometimes novel context. Four relevant research questions are presented, which examine (i) the impact of herbicide dose on selection for resistance, (ii) plant fitness in herbicide resistance studies, (iii) the efficacy of herbicide rotations and mixtures and (iv) the impacts of gene flow on resistance evolution and spread. In all cases, fundamental ecology and evolution have the potential to offer new insights into herbicide resistance evolution and management. © 2014 Society of Chemical Industry.

  8. Molar macrowear reveals Neanderthal eco-geographic dietary variation.

    Directory of Open Access Journals (Sweden)

    Luca Fiorenza

    Full Text Available Neanderthal diets are reported to be based mainly on the consumption of large and medium sized herbivores, while the exploitation of other food types including plants has also been demonstrated. Though some studies conclude that early Homo sapiens were active hunters, the analyses of faunal assemblages, stone tool technologies and stable isotopic studies indicate that they exploited broader dietary resources than Neanderthals. Whereas previous studies assume taxon-specific dietary specializations, we suggest here that the diet of both Neanderthals and early Homo sapiens is determined by ecological conditions. We analyzed molar wear patterns using occlusal fingerprint analysis derived from optical 3D topometry. Molar macrowear accumulates during the lifespan of an individual and thus reflects diet over long periods. Neanderthal and early Homo sapiens maxillary molar macrowear indicates strong eco-geographic dietary variation independent of taxonomic affinities. Based on comparisons with modern hunter-gatherer populations with known diets, Neanderthals as well as early Homo sapiens show high dietary variability in Mediterranean evergreen habitats but a more restricted diet in upper latitude steppe/coniferous forest environments, suggesting a significant consumption of high protein meat resources.

  9. A study of polluted eco-system around industrial areas

    International Nuclear Information System (INIS)

    Husaini, S.N.; Khan, E.U.; Qureshi, I.E.; Malik, F.; Zaidi, J.H.; Arif, M.; Fatima, I.; Arif, M.

    2005-01-01

    Industrial pollution is one of the most serious problems in Pakistan. The uncontrolled release of untreated industrial effluents to large water bodies has deleterious effects on water quality, aquatic life and human health. The concentration of heavy metals in eco-system is reaching at alarming levels and is increasing yearly. In reality, the industries are not equipped with proper effluent treatment plants. The environmental protection law is not strictly implemented to limit the release and/or proper disposal of industrial effluents. Therefore, volume of specified industrial discharge is growing at an exponential rate without any specific safeguards. Effective measures, which can eliminate or considerably reduce hazardous factors from the human environment to minimize the associated health risks, must be identified and eradicated. In order to achieve these objectives, the study has been done to reach a balanced assessment of the risks and benefits involved. For this purpose two industrial cities of Pakistan namely, Gujranwala and Faisalabad have been selected. Four major industries existing in these cities, namely Yam, textile, paper and board and ceramics, have been studied. The specimens of the irrigated soil exposed to the industrial effluent, crops and vegetables grown on that soil have been analyzed study the hazardous effects on human health. (author)

  10. Concept of heat-induced inkless eco-printing.

    Science.gov (United States)

    Chen, Jinxiang; Wang, Yong; Xie, Juan; Meng, Chuang; Wu, Gang; Zu, Qiao

    2012-07-01

    Existing laser and inkjet printers often produce adverse effects on human health, the recycling of printing paper and the environment. Therefore, this paper examines the thermogravimetry curves for printer paper, analyzes the discoloration of paper using heat-induction, and investigates the relationship between paper discoloration and the heat-inducing temperature. The mechanism of heat-induced printing is analyzed initially, and its feasibility is determined by a comparative analysis of heat-induced (laser ablation) printing and commercial printing. The innovative concept of heat-induced inkless eco-printing is proposed, in which the required text or graphics are formed on the printing paper via yellowing and blackening produced by thermal energy. This process does not require ink during the printing process; thus, it completely eliminates the aforementioned health and environmental issues. This research also contributes to related interdisciplinary research in biology, laser technology, photochemistry, nano-science, paper manufacturing and color science. Copyright © 2012 Elsevier Ltd. All rights reserved.

  11. Bio-inspired color sketch for eco-friendly printing

    Science.gov (United States)

    Safonov, Ilia V.; Tolstaya, Ekaterina V.; Rychagov, Michael N.; Lee, Hokeun; Kim, Sang Ho; Choi, Donchul

    2012-01-01

    Saving of toner/ink consumption is an important task in modern printing devices. It has a positive ecological and social impact. We propose technique for converting print-job pictures to a recognizable and pleasant color sketches. Drawing a "pencil sketch" from a photo relates to a special area in image processing and computer graphics - non-photorealistic rendering. We describe a new approach for automatic sketch generation which allows to create well-recognizable sketches and to preserve partly colors of the initial picture. Our sketches contain significantly less color dots then initial images and this helps to save toner/ink. Our bio-inspired approach is based on sophisticated edge detection technique for a mask creation and multiplication of source image with increased contrast by this mask. To construct the mask we use DoG edge detection, which is a result of blending of initial image with its blurred copy through the alpha-channel, which is created from Saliency Map according to Pre-attentive Human Vision model. Measurement of percentage of saved toner and user study proves effectiveness of proposed technique for toner saving in eco-friendly printing mode.

  12. Eco-routing: More green drivers means more benefits?

    Energy Technology Data Exchange (ETDEWEB)

    Valdes Serrano, C.; Perez Prada, F.; Monzon de Caceres, A.

    2016-07-01

    Information and Communications Technology (ICT)/Information and Technology Services (ITS) can play an important role in the transport sector, helping in maintaining accessibility and contemporarily optimizing the use of the vehicles. Among these ICT measures, eco-routing seems a promising one. Drivers normally follow the route which minimizes their generalized costs, normally time and money. But environmental concern is increasing, and drivers are starting to think about the effects of their driving. This means including CO2 emissions or fuel consumption in their route choice. But is this always positive, independently of the traffic situation and the penetration level of green drivers? This articles aims to analyze what happens in terms of fuel consumption, CO2 emissions and travel time, when different penetration levels of drivers, and with different traffic situations, follow the route of minimum fuel consumption instead of the conventional generalized costs. The analysis is based on a modelling process using a transport model of the whole region of Madrid. A total of 18 scenarios are considered: 3 reference scenarios (for congested, medium and low flow traffic situations), and 5 different penetration levels of green drivers for each traffic situation. Results show how impact varies substantially with the level of traffic and, also, that the more the best is not always true. (Author)

  13. About eco-ethical problems of Azerbaijan Republic

    Directory of Open Access Journals (Sweden)

    G. Sh. Mammadov

    2017-03-01

    Full Text Available Starting from the second half of the 20th century Ecological problems, that engulfed the world had an influence on our republic as well. Pollution of air and water basins and soils has reached for apogee, the process of degradation of winter and summer pastures has decreased, in some regions forests have been completely or partly destroyed. Consequences of fluctuation of sea level, problems related to ozone layer, global changes of climate being combined with other wide-scale processes have reached the extent at which they can not be neglected in Azerbaijan Republic. Where as global thinking and civilized relations between nations are being formed, international prestige of the state is starting to be estimated by its attitude to the nature and natural resources. Therefore at present time Azerbaijan Republic society pays incremental attention to its attitude towards environment, natural ecosystems, surface and underground minerals. In the article the approach aimed to solution of eco-ethical problems in Azerbaijan Republic has been used.

  14. Eco industrial Development: As a Way of Enhancing Sustainable Development

    Directory of Open Access Journals (Sweden)

    Begum Sertyesilisik

    2016-03-01

    Full Text Available The world’s habitat is being deteriorated especially due to the unsustainable production. The need for sustainable development and reducing humanities’ environmental footprint have been addressed in various international frameworks, meetings and reports (e.g. Kyoto protocol, the Resource Efficiency and Cleaner Production Program, the Ten Year Framework of Programs on Sustainable Consumption and Production, the UN Resource Panel, and the Green Economy Initiative, Rio+20, green building certificates, “UNEP Green Economy” in 2011, “Green New Deal” in 2012, the Intergovernmental Panel on Climate Change’s report etc.. EIDs (the eco industrial development can act as catalysts in sustainable development and in reducing environmental footprint of the production processes. Based on an in-depth literature review, this paper aims to analyze how EID can be supported so that environmental footprint of the production processes can be reduced contributing sustainable development. With this aim, the objectives include: analysis of the need for the EID; need for the sustainable development enhanced by sustainable production and sustainable products; key success factors for, barriers against and drivers for the EID. The policy makers, companies, and researchers are expected to get benefit from this paper.

  15. Identification, characterization and potent antitumor activity of ECO-4601, a novel peripheral benzodiazepine receptor ligand.

    Science.gov (United States)

    Gourdeau, Henriette; McAlpine, James B; Ranger, Maxime; Simard, Bryan; Berger, Francois; Beaudry, Francis; Farnet, Chris M; Falardeau, Pierre

    2008-05-01

    ECO-4601 is a structurally novel farnesylated dibenzodiazepinone discovered through DECIPHER technology, Thallion's proprietary drug discovery platform. The compound was shown to have a broad cytotoxic activity in the low micromolar range when tested in the NCI 60 cell line panel. In the work presented here, ECO-4601 was further evaluated against brain tumor cell lines. Preliminary mechanistic studies as well as in vivo antitumor evaluation were performed. Since ECO-4601 has a benzodiazepinone moiety, we first investigated if it binds the central and/or peripheral benzodiazepine receptors. ECO-4601 was tested in radioligand binding assays on benzodiazepine receptors obtained from rat hearts. The ability of ECO-4601 to inhibit the growth of CNS cancers was evaluated on a panel of mouse, rat and human glioma cell lines using a standard MTT assay. Antitumor efficacy studies were performed on gliomas (rat and human), human breast and human prostate mouse tumor xenografts. Antitumor activity and pharmacokinetic analysis of ECO-4601 was evaluated following intravenous (i.v.), subcutaneous (s.c.), and intraperitoneal (i.p.) bolus administrations. ECO-4601 was shown to bind the peripheral but not the central benzodiazepine receptor and inhibited the growth of CNS tumor cell lines. Bolus s.c. and i.p. administration gave rise to low but sustained drug exposure, and resulted in moderate to significant antitumor activity at doses that were well tolerated. In a rat glioma (C6) xenograft model, ECO-4601 produced up to 70% tumor growth inhibition (TGI) while in a human glioma (U-87MG) xenograft, TGI was 34%. Antitumor activity was highly significant in both human hormone-independent breast (MDA-MB-231) and prostate (PC-3) xenografts, resulting in TGI of 72 and 100%, respectively. On the other hand, i.v. dosing was followed by rapid elimination of the drug and was ineffective. Antitumor efficacy of ECO-4601 appears to be associated with the exposure parameter AUC and/or sustained

  16. One size does not fit all: Establishing the need for targeted eco-feedback

    International Nuclear Information System (INIS)

    Khosrowpour, Ardalan; Xie, Yimeng; Taylor, John E.; Hong, Yili

    2016-01-01

    Highlights: • We examined occupants’ responses to an eco-feedback system in a commercial building. • We analyzed the impact of notifications on the level of engagement of participants. • We found notification effectiveness to be highly dependent on the type of feedback. • Occupant response to uniform normative comparison eco-feedback varied substantially. • This highlights the need for targeted eco-feedback based on consumption patterns. - Abstract: Despite all improvements in buildings shell, equipment, and design, CO_2 emissions from buildings are increasing. Since occupants spend more than 87% of their time indoors, they are inseparable and significant elements of building system dynamics. Hence, there is a great potential for energy efficiency in buildings using a wide range of programs such as intervention and eco-feedback. Despite the high level of individual differences and intra-class variability of occupants’ behaviors, the current state-of-the-art eco-feedback programs treat all the occupants uniformly and do not target and tailor the feedback. Therefore, it leaves an opportunity to increase the efficacy of eco-feedback systems through the designing of tailored and targeted programs. In this paper, we conducted a comprehensive analysis and tested hypotheses on occupants’ behavioral responses to a normative comparison feedback program, in addition to the impact of notifications on the level of engagement of each group of occupants. We categorized occupants who participated in the normative comparison feedback program into three groups (i.e. low, medium, and high energy consumers) based on their baseline energy consumption, and tested 9 hypotheses. A mixed-effect regression model (MRM) and a paired t-test was implemented to evaluate the proposed hypotheses. The hypotheses examine the variability of occupants’ responses under the same eco-feedback program, and the effectiveness of notifications on reinforcing occupants’ engagement in

  17. Should spikes on post-resection ECoG guide pediatric epilepsy surgery?

    Science.gov (United States)

    Greiner, Hansel M; Horn, Paul S; Tenney, Jeffrey R; Arya, Ravindra; Jain, Sejal V; Holland, Katherine D; Leach, James L; Miles, Lili; Rose, Douglas F; Fujiwara, Hisako; Mangano, Francesco T

    2016-05-01

    There is wide variation in clinical practice regarding the role of electrocorticography immediately after resection (post-resection ECoG) for pediatric epilepsy surgery. Results can guide further resection of potentially epileptogenic tissue. We hypothesized that post-resection ECoG spiking represents a biomarker of the epileptogenic zone and predicts seizure outcome in children undergoing epilepsy surgery. We retrospectively identified 124 children with post-resection ECoG performed on the margins of resection. ECoG records were scored in a blinded fashion based on presence of frequent spiking. For patients identified as having additional resection based on clinical post-resection ECoG interpretation, these "second-look" ECoG results were re-reviewed for ongoing discharges or completeness of resection. Frequent spike populations were grouped using a standard scoring system into three ranges: 0.1-0.5Hz, 0.5-1Hz, >1Hz. Seizure outcomes were determined at minimum 12-month followup. Of 124 patients who met inclusion criteria, 60 (48%) had an identified spike population on post-resection ECoG. Thirty (50%) of these had further resection based on clinical interpretation. Overall, good outcome (ILAE 1) was seen in 56/124 (45%). Completeness of resection of spiking (absence of spiking on initial post-resection ECoG or resolution of spiking after further resection) showed a trend toward good outcome (OR 2.03, p=0.099). Patients with completeness of resection had good outcome in 41/80 (51%) of cases; patients with continued spikes had good outcome in 15/44 (35%) of cases. Post-resection ECoG identifies residual epileptogenic tissue in a significant number of children. Lower frequency or absence of discharges on initial recording showed a trend toward good outcome. Completeness of resection demonstrated on final ECoG recording did not show a significant difference in outcome. This suggests that post-resection discharges represent a prognostic marker rather than a remediable

  18. Reactor Physics Training

    International Nuclear Information System (INIS)

    Baeten, P.

    2007-01-01

    University courses in nuclear reactor physics at the universities consist of a theoretical description of the physics and technology of nuclear reactors. In order to demonstrate the basic concepts in reactor physics, training exercises in nuclear reactor installations are also desirable. Since the number of reactor facilities is however strongly decreasing in Europe, it becomes difficult to offer to students a means for demonstrating the basic concepts in reactor physics by performing training exercises in nuclear installations. Universities do not generally possess the capabilities for performing training exercises. Therefore, SCK-CEN offers universities the possibility to perform (on a commercial basis) training exercises at its infrastructure consisting of two research reactors (BR1 and VENUS). Besides the organisation of training exercises in the framework of university courses, SCK-CEN also organizes theoretical courses in reactor physics for the education and training of nuclear reactor operators. It is indeed a very important subject to guarantee the safe operation of present and future nuclear reactors. In this framework, an understanding of the fundamental principles of nuclear reactor physics is also necessary for reactor operators. Therefore, the organisation of a basic Nuclear reactor physics course at the level of reactor operators in the initial and continuous training of reactor operators has proven to be indispensable. In most countries, such training also results from the direct request from the safety authorities to assure the high level of competence of the staff in nuclear reactors. The objectives this activity are: (1) to provide training and education activities in reactor physics for university students and (2) to organise courses in nuclear reactor physics for reactor operators

  19. Status and developmental strategy of nuclear agricultural sciences in researches of eco-environmental sciences in agriculture

    International Nuclear Information System (INIS)

    Hua Luo; Wang Xunqing

    2001-01-01

    The concept, research scopes, research progress and achievement of nuclear agricultural sciences in past several decades in China, as well as the relationship between nuclear agriculture research and eco-environmental sciences were described. The disciplinary frontier, major research fields and priority developmental fields of nuclear agriculture in eco-environmental sciences was displayed. Suggestions were made to improve and strengthen nuclear agriculture research. Those provided basic source materials and consideration for application developmental strategy of nuclear agriculture in eco-environmental sciences

  20. Ecological network analysis for carbon metabolism of eco-industrial parks: a case study of a typical eco-industrial park in Beijing.

    Science.gov (United States)

    Lu, Yi; Chen, Bin; Feng, Kuishuang; Hubacek, Klaus

    2015-06-16

    Energy production and industrial processes are crucial economic sectors accounting for about 62% of greenhouse gas (GHG) emissions globally in 2012. Eco-industrial parks are practical attempts to mitigate GHG emissions through cooperation among businesses and the local community in order to reduce waste and pollution, efficiently share resources, and help with the pursuit of sustainable development. This work developed a framework based on ecological network analysis to trace carbon metabolic processes in eco-industrial parks and applied it to a typical eco-industrial park in Beijing. Our findings show that the entire metabolic system is dominated by supply of primary goods from the external environment and final demand. The more carbon flows through a sector, the more influence it would exert upon the whole system. External environment and energy providers are the most active and dominating part of the carbon metabolic system, which should be the first target to mitigate emissions by increasing efficiencies. The carbon metabolism of the eco-industrial park can be seen as an evolutionary system with high levels of efficiency, but this may come at the expense of larger levels of resilience. This work may provide a useful modeling framework for low-carbon design and management of industrial parks.