WorldWideScience

Sample records for dry frictionefecto del

  1. Cinética del secado de tomillo Drying kinetics of thyme

    Directory of Open Access Journals (Sweden)

    Ronicely P. da Rocha

    2012-06-01

    Full Text Available Los objetivos del trabajo fueran estudiar la cinética del secado de tomillo con posterior ajuste de diferentes modelos matemáticos a los datos experimentales y determinar los valores de la difusividad efectiva y energía de activación. Para el desarrollo del experimento de secado fueran utilizadas las temperaturas 30, 40, 50, 60 y 70 oC. El diseño experimental fue de bloques completamente aleatorizados, con tres repeticiones. Para el ajuste de los modelos matemáticos a los datos experimentales fue realizado el análisis de regresión no lineal, por el método Simplex-Quasi-Newton. Los resultados mostraron que el modelo matemático de Page obtuve un mejor ajuste a los datos experimentales, los valores de los coeficientes de difusividad efectiva variaron entre 3,69 x 10-12 e 1,19 x 10-10 m² s-1 y el valor de la energía de activación fue de 77,16 kJ mol-1.This work aimed to study the drying kinetics of thyme and subsequent adjustment of different mathematical models to the experimental data and to determine the effective diffusivity and the activation energy. In order to conduct the experiment the temperatures of 30, 40, 50, 60, 70 ºC were used. The experimental design employed was in randomized blocks with three repetitions. For the adjustment of the mathematical models to the experimental data non-linear regression was performed using Simplex-Quasi-Newton method. The results showed that the Page model was the one that promoted the best fit of the experimental data to describe the drying kinetics of the thyme leaves. The values of effective diffusivity coefficients ranged between 3.69 x 10-12 and 1.19 x 10-10 m² s-1 and the value of activation was 77.16 kJ mol-1.

  2. Cocoa Bean (Theobroma cacao L.Drying Kinetics Cinética del Secado de Cocoa (Theobroma cacao L.

    Directory of Open Access Journals (Sweden)

    Ndukwu MacManus Chinenye

    2010-12-01

    Full Text Available Cocoa (Theobroma cacao L. is widely produced in West Africa and South America and is a great economic tree crop, with so many industrial uses. In this work, the experimental drying kinetics of foreign species was investigated, and the experiments were carried out under isothermal conditions, using heated batch drier at 55, 70 and 81 ºC. The moisture ratio data obtained from change of moisture content with the drying time was fit to two thin layer drying model with good results. A faster drying process was observed at a higher drying temperature resulting in higher drying rates which is advantageous when evaluating costs. Fick’s second law of diffusion was used to predict effective diffusivity using experimental data assuming that the variation of diffusivity with temperature can be expressed by an Arrhenius type function, and the values of diffusivity obtained ranged from 6.137 x 10-10 to 2.1855 x 10-9 m2 s-1 for the temperature used. The Arrhenius constant (D is predicted at 8.64 x 10-4 m2 s-1 while the activation energy was predicted at 39.94 kJ mol-1.El cacao (Theobroma cacao L. es ampliamente producido en el Oeste de África y Sudamérica y es un cultivo de gran importancia económica, con muchos usos industriales. En este trabajo se investigó la cinética del secado experimental de especies foráneas, y se realizaron experimentos bajo condiciones isotérmicas, usando un secador discontinuo en caliente a 55, 70 y 81 °C. Los datos de relación de humedad obtenidos desde el cambio de contenido de humedad con el tiempo de secado se ajustaron a un modelo de secado de dos capas delgadas con buenos resultados. Se observó un proceso de secado más rápido a una temperatura de secado mayor resultando en mayores tasas de secado, lo que es ventajoso al evaluar costos. La segunda ley de difusión de Fick se usó para predecir difusividad efectiva usando datos experimentales, asumiendo que la variación de difusividad con la temperatura puede ser

  3. Modelación del secado neumático vortiginoso del bagazo de la caña de azúcar//Modulation of sugar cane bagasse pneumatic drying in a vortex

    Directory of Open Access Journals (Sweden)

    Eugenio F. Bombino-Matos

    2013-09-01

    Full Text Available Tomando en consideración los estudios realizados sobre la modelación del movimiento vortiginoso de partículas de bagazo, se realizó el estudio del secado neumático de esta importante biomasa teniendo en cuenta la transferencia de calor y de masa. Se modeló el proceso de secado a través de las ecuacionesfundamentales que describen la cinética del mismo y se compararon los resultados obtenidos con resultados reportados en la literatura especializada sobre mediciones de la variación del contenido de humedad en otros tipos de secadores neumáticos de bagazo para iguales condiciones de operación. Esta modelación permitió realizar simulaciones de este proceso las cuales arrojaron resultados aceptables en cuanto a los valores de disminución del contenido de humedad del bagazo lo que permitirá continuar profundizando en el desarrollo de próximos estudios sobre el tema ya que se evidencia que por esta vía es posible disminuir las dimensiones de los secadores de bagazo.Palabras claves: secado neumático vortiginoso, secado de bagazo, modelación matemática.______________________________________________________________________________AbstractTaking in account the studies carried out about the vortex movement of bagasse particles, the study of pneumatic drying of this important biomass was carried out considering the heat and mass transfer. The drying process was modeled through the fundamentals equations which describe the kinetic of it and theobtained results were compared with results reported in the specialized literature on drying measurements in others kinds of bagasse pneumatics dryers under the same conditions of operation. This modulation permitted to made simulations of this process which produced acceptable results about the decrease humidity values of bagasse and it will permit to continue in the development of next studies about this topic because it is evident that it is possible to reduce bagasse dryer dimensions.Key words

  4. Simulación físico-matemática del secado de la zeolita con microondas. // Physical-mathematical simulation of the zeolite drying with microwaves.

    Directory of Open Access Journals (Sweden)

    G. Quesada Ramos

    2004-01-01

    Full Text Available Se realiza una simulación físico-matemática del secado de la zeolita sometida a radiaciones de microondas utilizando la leyde Lambert. Las ecuaciones se expresan en un esquema implícito unidimensional, y se emplea el método numérico dediferencias finitas. La solución del sistema de ecuaciones se realiza por medio del método iterativo de Gauss-Seidel. Losresultados teóricos se comparan con los obtenidos experimentalmente.Palabras claves: Simulación, secado, zeolita, microondas._______________________________________________________________________________AbstractA physical-mathematical simulation of the zeolite drying with microwaves using the Lambert`s law is made. The equationsare expressed in an unidimensional implicit scheme, and the finite differences numeric method is used. The solution of theequations system is carried out by using the Gauss-Seidel´s iterativ method. The theoretical results are compared with thoseexperimentally obtained.Key words: Physical-mathematical simulation, drying, zeolite, microwaves.

  5. DETERMINATION OF A MATHEMATICAL MODEL TO ESTIMATE THE AREA AND DRY WEIGHT OF THE LEAF LIMBO OF Prunus persica CV. Jarillo DETERMINACIÓN DE UN MODELO MATEMÁTICO PARA LA ESTIMACIÓN DEL ÁREA FOLIAR Y PESO SECO DEL LIMBO DE Prunus persica CV. Jarillo

    Directory of Open Access Journals (Sweden)

    Enrique Quevedo García

    2012-06-01

    Full Text Available Abstract. A study was conducted to determine the variables that estimated the leaf limbo area and the leaf limbo dry weight of peach Prunus persica (L. Batsch cv. Jarillo. Fifty leaves, aged 2.5 months, were selected and measured: leaf limbo length and width, petiole length, leaf length, petiole diameter, leaf limbo fresh weight, petiole fresh weight, leaf fresh weight, leaf limbo dry weight, petiole dry weight, leaf dry weight, length/width limbo, petiole length/limbo length and leaf limbo area. The results allowed to obtain regression equations for estimating the leaf area and the limbo dry weight. Using the lineal models LA = b1 + b2 (LLL x LLW and LA= b1+ b2LLL + b3LLW a leaf area equation was determined. Alternative models to calculate limbo dry weight were evaluated LLDW = -b1+ b2 LLFW and LLDW= - b1 + b2LLL + b3PL. The best equations found with an R2 of 0.99 were LA = 1.572 + 0.65169(LLL x LLW, LA=-23.106+2.8064LLW + 3.6761LLL and LLDW = -0.002+0.401(LLFW.Resumen. Se realizó un estudio para determinar las variables que estimaran el área del limbo foliar y el peso seco del limbo de durazno Prunus persica (L. Batsch cv. Jarillo. Se seleccionaron cincuenta hojas con 2,5 meses de edad, fueron medidos: ancho del limbo, longitud del limbo, longitud del peciolo, longitud hoja, diámetro peciolo, peso fresco del limbo, peso fresco del peciolo, peso fresco de la hoja, peso seco del limbo, peso seco peciolo, peso seco de la hoja, longitud /ancho limbo, longitud del peciolo/longitud del limbo, área foliar del limbo. Los resultados alcanzados permitieron obtener ecuaciones de regresión para estimar el área foliar del limbo y el peso seco del limbo. Se halló una ecuación para la determinación del área foliar del limbo con los modelos lineales LA = b1 + b2 (LLL x LLW y LA= b1 + b2LLL + b3LLW. También se evaluaron modelos alternativas para calcular el peso seco del limbo, LLDW = -b1+ b2LLFW y LLDW= - b1 + b2LLL + b3PL. Las mejores ecuaciones

  6. SIMULACIÓN MATEMÁTICA DEL PROCESO DE SECADO DE LA GRACILARIA CHILENA (GRACILARIA CHILENSIS MATHEMATICAL SIMULATION OF DRYING PROCESS OF CHILEAN GRACILARIA (GRACILARIA CHILENSIS

    Directory of Open Access Journals (Sweden)

    Antonio Vega Gálvez

    2007-04-01

    Full Text Available El objetivo de este trabajo es estudiar y modelar la cinética de secado por aire caliente del alga Gracilaria (Gracilaria chilensis utilizando un secador convectivo diseñado y construido en la Facultad de Ingeniería de la Universidad de La Serena a cinco temperaturas de bulbo seco (30, 40, 50, 60 y 70ºC y velocidad de aire de 2.0±0.2 m.s-1. Para el modelado matemático se utilizan tres modelos empíricos (Newton, Henderson-Pabis & Page. Durante el experimento se observa solamente el periodo de velocidad decreciente, por lo que se utiliza la ecuación de la segunda Ley de Fick para el cálculo de la difusividad efectiva de agua. El proceso de secado presenta humedades finales entre 0.096 g agua/g m.s y 0.061 g agua/g m.s para 30ºC y 70ºC, respectivamente. Tanto la difusividad como los parámetros cinéticos k1, k2 y k3 de los modelos propuestos presentan dependencia con la temperatura y al evaluarlos con la ecuación de Arrhenius se obtienen energías de activación de 39.92, 33.85, 33.49 y 33.83 kJ·mol-1, respectivamente. De acuerdo a los análisis estadísticos que se utilizan (r2, SSE, RMSE y X², el modelo de Page muestra la mejor calidad de ajuste sobre los datos experimentales, otorgando así una buena herramienta para el modelado de la cinética de secado industrial de la Gracilaria chilensis y el cálculo del tiempo de secado a diferentes temperaturas, con el fin de alcanzar un contenido de humedad comercial aceptable internacionalmente.The aim of this research is to study and to model the hot air drying kinetics of Gracialaria algae (Gracilaria chilensis, using a convective drier -designed and built at the Faculty of Engineering of Universidad de La Serena- at five dry bulb temperatures (30, 40, 50, 60 and 70ºC and an air velocity of 2.0 ± 0.2 m.s-1. Three empirical models are used for the mathematic modeling (Newton, Henderson-Pabis & Page. During the experiment, only a falling rate period is observed, hence the Fick's second

  7. Interactions between frugivorous bats (Chiroptera: Phyllostomidae) and Piper tuberculatum (Piperaceae) in a tropical dry forest in Valle del Cauca, Colombia.

    Science.gov (United States)

    Montoya-Bustamante, Sebastián; Rojas-Díaz, Vladimir; Torres-González, Alba Marina

    2016-06-01

    In any ecosystem, fruits are resources that vary in time and space as well as in nutritional content. Coexistence of species from a trophic guild depends on the division and use of resources. Therefore, the organisms that depend on them as a food source, tend to show a certain degree of specialization. This way, understanding the factors that influence the dynamics of seed dispersal is important for the regeneration and conservation of tropical ecosystems. Our aim was to determine variation in consumption of Piper tuberculatum by fruit bat assemblages in the village of Robles (Jamundí, Valle del Cauca, Colombia). P. tuberculatum is a resource used not only by wildlife but also by people in the village of Robles. Bats were captured in mist nets between June and November 2014, their feces were collected, and the length of the forearm, wing area, leg length and mass were recorded. At the Universidad del Valle seed laboratory, fecal samples were washed, and their content determined. Of the 14 species captured, Sturnira lilium, Carollia brevicauda, Carollia perspicillata and Artibeus lituratus showed signs of having consumed P. tuberculatum. Sturnira lilium was the main consumer of P. tuberculatum fruits, with the greatest number of consumption events of fruit from this plant species, whereas the other bats showed more diversified consumption events. The greatest niche overlap was recorded between C. brevicauda and C. perspicillata, species that showed similar sizes (i.e., wing area and forearm length) followed by S. lilium and C. perspicillata. In contrast, A. lituratus showed the least niche overlap with the other three fruit bats captured. In conclusion, Sturnira lilium showed an interaction Sturnira-Piper, which is the result of low Solanum availability, and this bat species was the largest consumer of P. tuberculatum in the region.

  8. Datos experimentales de la cinética del secado y del modelo matemático para pulpa de cupuaçu (Theobroma grandiflorum en rodajas Kinetic drying experimental data and mathematical model for cupuaçu pulp (Theobroma grandiflora slices

    Directory of Open Access Journals (Sweden)

    Abraham Damian Giraldo-Zuniga

    2010-03-01

    Full Text Available En este trabajo fueron obtenidos experimentalmente la cinética del secado de la pulpa de cupuaçu en forma de rodajas con espesor de 0,5 cm. El secado fue realizado utilizándose un secador laboratorial de bandejas, a las temperaturas de 50, 60 y 70 ºC y a la velocidad del aire de secado de 1,5 m/s. De acuerdo con los datos de la cinética del secado se puede observar que cuanto mayor es la temperatura del secado mayor es la velocidad del secado. El tiempo requerido para secar el producto hasta una humedad del 20%, fueron 9,2, 8,1 y 7,3 horas para las temperaturas de secado de 50, 60 y 70 ºC respectivamente. Las curvas experimentales del secado fueron ajustados al modelo difusional de Fick considerándose la muestra como una lámina infinita y al modelo de Page. Los dos modelos se ajustaron bien a los datos experimentales. Los coeficientes de difusión del modelo de Fick variaron de 1.171 a 1.561 m/s².This work examined experimentally the kinetics of drying cupuaçu pulp (Theobroma grandiflorum slices. The experimental runs were driven in a laboratory dryer, at temperatures of 50, 60 and 70 ºC and an air drying velocity of 1.5 m/s. According to the kinetics study, increasing the temperature led to a decrease in drying time. The required drying times were 9.2, 8.1 and 7.3 hours for drying temperatures of 50, 60 and 70 ºC respectively. The experimental drying curves were adjusted to Fick's diffusional model for an infinite lamina with shrinkage and Page model. The diffusion coefficients of the Fick model varied between 1.171 and 1.561 m/s².

  9. Dry Eye

    Science.gov (United States)

    ... Eye » Facts About Dry Eye Listen Facts About Dry Eye Fact Sheet Blurb The National Eye Institute (NEI) ... and their families search for general information about dry eye. An eye care professional who has examined the ...

  10. Influence of fruit maturity and calyx drying on cape gooseberry (Physalis peruviana l., stored at 18°C Influencia de la madurez del fruto y del secado del cáliz en uchuva (Physalis peruviana l., almacenada a 18°C

    Directory of Open Access Journals (Sweden)

    Moreno Paola

    2006-12-01

    Full Text Available

    Cape gooseberry fruits at the maturity stages 3 (yellow greenish or 5 (yellow orange and with calyx drying for 6 hours at 18 or 24ºC, were stored at the temperature of 18ºC and 85 % relative humidity for 20 days, to evaluate physical-chemical and physiological changes. The cape gooseberry, a climacteric fruit, presented the maximum of respiration between 6 and 8 days of storage. The 6th day of storage seems to be crucial due to the very high metabolism and the maximum contents of sugars and acids on this day. Soluble solids tended to increase and the titratable acids went to diminish. The fruit's sugar content was characterized by a major concentration of sucrose, followed by glucose and fructose. While the citric acid showed its highest level at the sixth storage day that of the tartaric acid increased constantly up to 18 days. The fruit maturity stage 3 is that which best conserved the sugars and organic acids evaluated. The maturity index influenced more than calyx drying the postharvest behavior of cape gooseberry. Calyx drying at 24ºC caused the highest climacteric peak and originated the highest loss of fresh weight in fruits harvested at maturity index 5.

    Key words: Physalis peruviana; respiration; climacteric fruit; Brix degrees; organic acids; sugars.

    Frutos de uchuva en estados de madurez 3 (amarillo verdoso ó 5 (amarillo naranja y con secado del cáliz durante seis horas a 18 y 24ºC, se almacenaron a temperatura ambiente (18ºC y humedad relativa del 75% durante 20 días, con el fin de evaluar cambios físico-químicos y fisiológicos. La uchuva, fruto climatérico, presentó el máximo de respiración entre los 6 y 8 días de almacenamiento. El día 6 de almacenamiento parece ser crucial debido al metabolismo muy elevado y los contenidos más altos de azúcares y ácidos. Los sólidos solubles totales tendieron a aumentar, la acidez titulable a disminuir. El contenido de azúcares se caracterizó por

  11. Avifauna de la selva baja caducifolia en la cañada del río Sabino, Oaxaca, México Avifauna of the tropical dry forest in the Sabino Canyon, Oaxaca, Mexico

    Directory of Open Access Journals (Sweden)

    Leopoldo Vázquez

    2009-08-01

    Full Text Available Se describe la avifauna de la selva baja caducifolia del cañón del río Sabino, Oaxaca, al sureste de la Reserva de la Biosfera Tehuacán-Cuicatlán y compara la similitud de la avifauna de la Reserva con la de otras regiones con selvas bajas en México. El trabajo se realizó entre junio de 2005 y octubre de 2006, registrando 113 especies pertenecientes a 13 órdenes y 34 familias; 6 especies son muy abundantes, 10 abundantes, 20 comunes, 32 poco comunes y 37 raras; 79 de las especies registradas fueron residentes, 28 visitantes invernales, 2 visitantes de verano, 3 transitorias y 5 residentes con movimientos estacionales; 15 especies son endémicas a México y 23 están dentro de alguna categoría de riesgo. La avifauna estudiada representa una mezcla de especies características de la cuenca del Balsas, las vertientes pacífica y atlántica y los ambientes montanos y áridos del centro de México. Por su composición específica la avifauna estudiada se relacionó con las avifaunas de la cuenca del Balsas. La selva baja del cañón del Sabino es prioritaria para la conservación debido a su riqueza en especies endémicas y a la presencia una colonia reproductora de la guacamaya verde, Ara militaris, especie globalmente amenazada.This study describes the birds of the tropical dry forest in Sabino Canyon, Oaxaca, in the southeastern part of the Tehuacán-Cuicatlán biosphere reserve. Field work was conducted between June 2005 and October 2006. A total of 113 species belonging to 13 orders and 34 families were recorded. Six species were classified as very abundant, 10 as abundant, 20 as common, 32 as uncommon, and 37 as rare; 79 species were permanent residents, 28 were winter visitors, 2 summer visitors, 3 transients, and 5 were local migrants; 15 species were classified as endemic to Mexico, and 23 are threatened. The bird composition of Sabino Canyon mainly resembles the avifauna the Balsas river basin. The avifauna of the tropical dry

  12. Polifenoles y Actividad Antioxidante del Fruto Liofilizado de Palma Naidi (Açai Colombiano (Euterpe oleracea Mart Polyphenols and Antioxidant Activity of the Freeze-Dried Palm Naidi (Colombian Açai (Euterpe oleracea Mart

    Directory of Open Access Journals (Sweden)

    Benjamín Alberto Rojano

    2011-12-01

    Full Text Available Euterpe oleracea es una palmera indígena autóctona de América del Sur. El fruto conocido como açaí en Brasil y palma naidi en Colombia, es de gran valor económico para los pueblos nativos. Para los análisis se usó una pulpa liofilizada, proveniente del Pacifico colombiano. Entre los muchos hallazgos, se presenta un alto porcentaje de minerales (6,94%, específicamente sodio, hierro y potasio. La palma naidi es rica en compuestos polifenólicos, tipo antocianinas (268,5 mg Cianidin-3-Glucosido/ 100 g de liofilizado donde el 95% de las antocianinas corresponden al Cianidin-3-Glucosido (255,1 mg/ 100 g de liofilizado y de otros compuestos fenólicos como los ácidos fenólicos: ferúlico (10,27 mg/100 g de liofilizado, caféico (7,06 mg/100 g de liofilizado, p-coumárico (2,81 mg/100 g de liofilizado y menor cantidad clorogénico 0,30 mg/100 g de liofilizado. Los polifenoles contribuyen a la capacidad antioxidante del naidi; medida por las técnicas ABTS, DPPH y FRAP y específicamente un valor ORAC (Hidrofílico (Oxygen Radical Absorbance Capacity de 98142,0 Micromol Tx/100 g de liofilizado; además un valor ORAC Lipofílico de 3194,1 Micromol Tx/ 100 g de liofilizado. Un valor ORAC total igual a 101336,1 Micromol Tx/ 100 g de liofilizado.Euterpe oleracea Mart is a native palm tree native of South America. The fruit known as açaí in Brazil and naidi palm in Colombia and is of great economic value to the native peoples. For the analysis was used freeze-dried pulp, from the Colombian Pacific. This fruit has a high percentage of minerals (6.94%, specifically sodium, potassium and iron. Naidi palm is rich in polyphenolic compounds, especially anthocyanins (268.5 mg cyanidin-3-glucoside per 100 g of freeze dried and phenolic acid as ferulic (10.27 mg/100 g of freeze dried , caffeic (7.06 mg/100 g of freeze dried, p-Coumaric (2.81 mg/100 g of freeze dried and fewer chlorogenic (0.30 mg/100 g of freeze dried; which provides high antioxidant

  13. Dry socket

    Science.gov (United States)

    Alveolar osteitis; Alveolitis; Septic socket ... You may be more at risk for dry socket if you: Have poor oral health Have a ... after having a tooth pulled Have had dry socket in the past Drink from a straw after ...

  14. Tomato Infrared Drying: Modeling and some Coefficients of the Dehydration Process Secado de Tomate por Infrarrojo: Modelación y algunos Coeficientes del Proceso de Deshidratación

    Directory of Open Access Journals (Sweden)

    Paulo Cesar Corrêa

    2012-06-01

    Full Text Available Infrared dehydration is more advantageous than the convective system under similar conditions, and studying this process is important to further develop equipment and procedures. Thus, the aim of this work was to study the dehydration process of tomato (Solanum lycopersicum L. slices obtained by infrared drying at three different maturity stages throughout two different procedures: Firstly, the drying model was determined by applying the mass and energy balances under wet bulb temperature for the constant drying rate period and secondly, the mass effective diffusion coefficient was determined throughout the experimental data and the theory of diffusion of the liquid phase for the decreasing drying rate period. Tomato fruits cv. Santa Cruz were used. Three maturity stages were selected: green (stage 1, orange (stage 2, and red (stage 3. Mathematical models frequently used to represent drying of agricultural products were fitted to the experimental data of tomato drying. The effective diffusion coefficient was obtained by adjusting the liquid diffusion mathematical model to the experimental data of the descending period of dehydration. The two-term model was the best one to represent the tomato dehydration process. The critical moisture content for tomato dehydration was 2.97 kgw kgdm-1. There is an initial dehydration period in which the drying rate reaches its maximum (approximately 1.05 kgw kgdm-1, about 3 min. Three different methods were used to obtain values of the effective diffusion coefficient, including the finite element method, which had the lowest values for the least square sum of deviation 1.00 x 10-7 m² s-1. The global coefficient of heat transfer was 12.45 W m-2K-1, and the global coefficient of mass transfer was 0.0105 m s-1.La deshidratación por infrarrojo es más ventajosa que el sistema convectivo, en condiciones similares, y el estudio de este proceso es importante para el desarrollo de equipos y procedimientos. Por tanto

  15. Influence of Maltodextrin and Spray Drying Process Conditions on Sugarcane Juice Powder Quality / Influencia de la Maltodextrina y Condiciones del Proceso de Secado por Aspersión en la Calidad del Polvo de Jugo de Caña Panelera

    Directory of Open Access Journals (Sweden)

    Esteban Largo Ávila

    2014-12-01

    Full Text Available Abstract. Food powder liquid extracts obtained from fruits andvegetables can be manufactured using spray drying technologieswhile maintaining the quality attributes that are required by theindustrial sector. The aim of this study was to evaluate the effectof maltodextrin and spray drying process conditions on sugarcanejuice powder. A central composite design was used with a responsesurface analysis of four factors: (A maltodextrin (10-20%, (Binlet air temperature (130-150 °C, (C outlet air temperature (75-85 °C and (D atomization speed (22,000–26,000 rpm. Moisture,hygroscopicity, solubility, effective recovery and formation ofdeposits on the walls presented significant differences (P<0.05with respect to all factors, while, for water activity, no statisticaldifferences were observed. The optimization of the factors foundfor the drying operating conditions were: (A 20%, (B 130 °C, (C75 °C and (D 22,000 rpm, respectively. / Resumen. Polvos alimentarios de extractos líquidos obtenidos apartir de frutas y vegetales pueden ser manufacturados usandotecnologías de secado por aspersión y mantener los atributosde calidad requeridos en el sector industrial. El objetivo de esteestudio fue evaluar el efecto de la adición de maltodextrina y lascondiciones de procesamiento por secado por aspersión en laobtención de polvo de jugo de caña. Un diseño central compuestoy análisis mediante superficies de respuesta con cuatro factoresestadísticos fue establecido: (A maltodextrina (10-20%, (Btemperatura del aire de secado a la entrada (130-150 °C, (Ctemperatura del aire a la salida (75-85 °C y (D velocidad deldisco atomizador (22.000–26.000 rpm. Los resultados mostraronque las variables contenido de humedad del producto, solubilidad,recuperación efectiva y formación de depósitos de sólidos en lapared del secador son estadísticamente significativos (P<0,05 conrespecto a los factores estudiados, mientras que la actividad deagua del producto

  16. Influence of mechanical creep burned during the dry storage; Influencia del quemado en la fluencia mecanica durante el almacenamiento en seco

    Energy Technology Data Exchange (ETDEWEB)

    Feria, F.; Herranz, L. E.

    2010-07-01

    This paper discusses the effect of burning, reached at the end of life of the reactor fuel rod, on the deformation of the mechanical creep sheath during dry storage. The simulation is conducted on scenarios postulates of irradiated fuel rods at different burned.

  17. Simulation of Dry Matter Productivity and Water Dynamics in a Chilean Patagonian Range Simulación de la Productividad de Materia Seca y Dinámica del Agua en Praderas de la Patagonia Chilena

    Directory of Open Access Journals (Sweden)

    Giorgio Castellaro G

    2010-09-01

    Full Text Available This paper describes a simulation model combining the main components of water balance and growth of perennial grassland steppe in Chilean Patagonia, to estimate long-term annual production (Yr, kg ha-1 and sheep carrying capacity (GC, sheep equivalent [EO] ha-1. The model is based on climate-water balance relationships, where the basic process is evapotranspiration. The model calculates Yr depending on the accumulation of transpiration and the water use efficiency from the time of growth initiation until the grassland accumulates the maximum amount of dry matter (DM. Depending on Yr, the DM requirement of EO, the proper use factor of grassland and a slope correction factor, a range site GC is calculated. Simulations were performed using actual climate data sets of eight growing seasons at Kampenaike (52º41' S; 70°54'W; 12 m.a.s.l. and a long-term simulation in the same location, using a stochastic weather variables generator. Through the model it was possible to estimate the water loss associated with the components of water balance and estimate the restriction imposed by water deficit on Yr. By simulating many years, it was possible to establish a normal distribution of GC with 0.629 EO ha-1 yr-1, associated with 80% probability of being exceeded, which is lower than values reported in field assessments. This method calculates GC with a conservational approach, taking into account soil and climatic variability in semiarid ecosystems.Se describe un modelo de simulación para pastizales esteparios de la Patagonia chilena, que estima a largo plazo los principales componentes del balance hídrico, la producción anual de MS (Yr, kg ha-1 y la capacidad de carga ovina (GC, equivalente ovino [EO] ha-1 de éstos. El modelo se basa en la relación clima-balance hídrico, siendo el proceso básico la evapotranspiración. Yr es función de la acumulación de transpiración durante la temporada de crecimiento y de la eficiencia del uso del agua. La GC

  18. Modulation of sugar cane bagasse pneumatic drying in a vortex; Modelación del secado neumático vortiginoso del bagazo de la caña de azúcar

    Energy Technology Data Exchange (ETDEWEB)

    Bombino Matos, Eugenio F.; Roca Alarcón, Guillermo A. [Universidad de Oriente. Facultad de Ingeniería Mecánica. Santiago de Cuba (Cuba); Marín Morán, Jorge E. [Universidad de Oriente. Facultad de Ciencias Naturales. Santiago de Cuba (Cuba)

    2013-07-01

    Taking in account the studies carried out about the vortex movement of bagasse particles, the study of pneumatic drying of this important biomass was carried out considering the heat and mass transfer. The drying process was modeled through the fundamentals equations which describe the kinetic of it and the obtained results were compared with results reported in the specialized literature on drying measurements in others kinds of bagasse pneumatics dryers under the same conditions of operation. This modulation permitted to made simulations of this process which produced acceptable results about the decrease humidity values of bagasse and it will permit to continue in the development of next studies about this topic because it is evident that it is possible to reduce bagasse dryer dimensions. (author)

  19. Dry Etching

    DEFF Research Database (Denmark)

    Stamate, Eugen; Yeom, Geun Young

    2016-01-01

    generation) to 2,200 × 2,500 mm (eighth generation), and the substrate size is expected to increase further within a few years. This chapter aims to present relevant details on dry etching including the phenomenology, materials to be etched with the different recipes, plasma sources fulfilling the dry...

  20. Efecto del secado en ambiente de servicio en la evolución de las propiedades mecánicas de hormigones livianos estructurales Effect of drying under service environment on the mechanical properties of structural lightweight concretes

    Directory of Open Access Journals (Sweden)

    Carlos Videla

    2007-08-01

    Full Text Available En este trabajo se evalúa el efecto de la humedad relativa del ambiente de servicio en las resistencias a compresión y a tracción y en el módulo de elasticidad de hormigones livianos estructurales. Además se establecen relaciones que permiten estimar estas propiedades en función de la humedad relativa del ambiente y del tiempo de secado. Los hormigones se fabricaron con dos tipos de áridos gruesos livianos, piedra pómez y pellets de ceniza volante, y con un árido fino de densidad normal. Los hormigones se sometieron a dos condiciones ambientales de servicio: una a 90% de humedad relativa y otra a 90% de humedad relativa durante los 7 primeros días y luego a 50% de humedad relativa hasta la edad de ensayo. Los ensayos se efectuaron a 7, 28, 60 y 90 días de edad. Se observó un deterioro importante de las propiedades medidas por efecto de las condiciones de secado; a 83 días de secado, en promedio las pérdidas de resistencia a tracción y compresión fueron de 20% y 15%, respectivamente, y de módulo de elasticidad de 40% respecto a hormigones a 90% de humedad relativa. Se concluye que hay dos variables principales que regulan el efecto del secado en el hormigón liviano. La primera de éstas corresponde a razón agua-cemento y que define entre otras cosas la permeabilidad de la fase resistente. La otra variable corresponde al contenido relativo de árido liviano en la mezclaIn this paper the effect of the ambient relative humidity at service on the compressive and splitting strengths and in the modulus of elasticity of structural lightweight concretes is evaluated. Also, relationships are proposed allowing estimating these properties as a function of the ambient relative humidity and drying time. The concretes were made with two types of coarse lightweight aggregates, pumice and fly ash pellets, and with normal density fine aggregate. The concretes were subjected to two different environmental service conditions: 90% relative

  1. Incremento de disolución de un derivado del furano mediante la técnica de secado por atomización Improvement of Furane derivate dissolution rate using spray drying technique

    Directory of Open Access Journals (Sweden)

    Antonio Iraizoz Barrios

    2012-06-01

    Full Text Available Objetivo: incrementar la solubilidad en agua del 2-bromo-5-(2-bromo-2-nitrovinyl-furano (G1, un ingrediente farmacéuticamente activo sintetizado por el Centro de Bioactivos Químicos de la Universidad Central de Las Villas, con potente acción bactericida y fungicida, mediante la elaboración de macropartículas de dispersiones sólidas utilizando un proceso de secado por atomización. Métodos: se realizó un ensayo preliminar de secado por atomización de la suspensión de G1, compuesta por: 10 g de G1, 1 g de Aerosil (Aerosil®, Degusa, Bélgica, 1 g de laurilsulfato de sodio y 100 mL de agua. La atomización se efectuó en un equipo de laboratorio (Buchi Mini Dryer spray a 90 ºC. La dispersión sólida obtenida fue caracterizada físico-químicamente mediante difracción de rayos X, granulometría láser por el método de difracción angular, calorimetría diferencial de barrido, microscopia electrónica de barrido y espectrofotometría de absorción infraroja. Resultados: las partículas obtenidas presentaron un pequeño tamaño, forma esférica y un incremento de la cristalinidad del G-1; no se encontraron interacciones entre los componentes de la dispersión ni presencia de productos de degradación, y la solubilidad del G-1 en agua resultó notablemente incrementada. Conclusiones: el producto obtenido por la técnica de secado por atomización incrementó apreciablemente la solubilidad del G1 sin afectar los grupos funcionales, responsables de la actividad terapéutica que se le reportan al ingrediente activo estudiado. Estos alentadores resultados sugieren la necesidad de continuar estudios para la optimización del proceso y realizar al producto obtenido ensayos de estabilidad con el objetivo de su futura inclusión en formas farmacéuticas de dosificación.Objective: to increase the solubility of 2-bromium-5(2-bromium-2-nitrovinyl-furane (G1, one pharmaceutically active ingredient with potent bactericidal and fungicidal action

  2. Oclusión canalicular con tapones de silicona de Herrick en el tratamiento del ojo seco Canicular occlusion with Herrick silicone plugs in the treatment of dry eye

    Directory of Open Access Journals (Sweden)

    Jaime Alemañy González

    2002-06-01

    Full Text Available Para evaluar la desaparición de síntomas y signos en el síndrome de ojo seco por deficiencia del componente acuoso de la película lagrimal, se estudiaron 15 pacientes que llevaban tratamiento con lágrimas artificiales, a pesar de lo cual presentaban síntomas por sequedad ocular. Se realizó oclusión canalicular de prueba con tapones de colágeno y luego definitiva con los de silicona de Herrick en el canalículo inferior. Se evaluaron por consulta hasta un año después del proceder. Se encontró que el 52 % de los casos tuvieron desaparición de los síntomas, el 40 % necesitaron añadir colirio de lágrimas artificiales ocasionalmente y el 8 % de los casos necesitaron oclusión del canalículo superior. Este tratamiento es un método sencillo y efectivo, que proporciona alivio a largo plazo a los pacientes con síndrome de ojo seco, mejorando su calidad de vida.To evaluate the disappearance of symptoms and signs in the dry eye syndrome due to deficiency of the aqueous component of the lacrimal film, 15 patients that were under treatment with artificial tears, although they still had symptoms resulting from ocular dryness, were studied. Canicular occlusion with collagen plugs was performed first as a test and then definitive occlusion with Herrick silicone plugs in the inferior canaliculus. These patients were evaluated at the physician’s office a year after the procedure. It was found that the symptoms dissappeared in 52 % of the cases, that 40 % needed to add occasionally collyrium of artificial tears and that 8 % of them required occlusion of the superior canaliculus. This treatment is a simple and effective method that provides long-term release to patients with dry eye syndrome and improves their quality of life.

  3. License considerations of the temporary storage in dry of the nuclear spent fuel of light water reactors; Consideraciones de licenciamiento del almacenamiento temporal en seco del combustible gastado nuclear de reactores de agua ligera

    Energy Technology Data Exchange (ETDEWEB)

    Bazan L, A.; Vargas A, A.; Cardenas J, J. B., E-mail: ariadna.bazan@cfe.gob.mx [Comision Federal de Electricidad, Central Nucleoelectrica Laguna Verde, Carretera Cardel-Nautla Km 42.5, Alto Lucero, Veracruz (Mexico)

    2011-11-15

    The spent fuel of the nuclear power plants of light water is usually stored in cells or frames inside steel coating pools. The water of the spent fuel pool has a double function: it serves as shielding or barrier for the radiation that emits the spent fuel and, on the other hand, to cool it in accordance with its decay in the time. The administration policies of the spent fuel vary of some countries to other, resulting common to all the cases this initial stage of cooling in the pools, after its irradiation in the reactor. When is not possible to increase more this capacity, usually, technologies of temporary storage in dry of the spent fuel in independent facilities are used. The storage in dry of the spent fuel differs of the storage in the fuel pools making use of gas instead of water as coolant and using metal or concrete instead of the water like barrier against the radiation. The storage industry in dry offers a great variety of technologies, which should be certified by the respective nuclear regulator entity before its use. (Author)

  4. Evaluación del peso seco y el agua corporal según bioimpedancia vectorial frente al método tradicional Assessing dry weight and body water using bioimpedance vector analysis compared to the traditional method

    Directory of Open Access Journals (Sweden)

    María Teresa Centellas Tristán

    2013-03-01

    , los resultados mostraron variaciones poco significativas de los parámetros estudiados. Conclusiones: Aunque la bioimpedancia aporta conocimientos más exactos sobre la composición hídrica corporal y la distribución del agua, el peso seco establecido por estimación clínica sigue siendo de gran valor. La bioimpedancia ayuda a detectar pequeños cambios subclínicos, que podrían tener trascendencia a más largo plazo. La bioimpedancia pone de manifiesto de forma objetiva la desnutrición presente en casi la mitad de pacientes de hemodiálisis.Introduction: Electrical bioimpedance can be used to establish the hydration and nutritional state in haemodialysis. Assessing the hydration status of patients is habitually done as a "clinical art" using the concept of "dry weight". There are few studies that examine the concordance between dry weight estimated clinically and the dry weight deduced post-bioimpedance analysis. Material and methods: 36 patients were studied (26 men and 10 women. Electrical bioimpedance vector analysis was performed before and 30' after midweek dialysis, measuring weight, total water and its distribution, phase angle, Na/K ratio, and the position of each patient's vector in the sphere normogram: percentiles 50.75 and 95. Dry weight was estimated according to the subjective assessment of the nephrologist, nurse and patient. Furthermore, in 12 stable patients the bioimpedance analysis continued for 4 weeks. Results: The age was 69.6±12.5 (r=29-89. Weight was 73.1±14.1 predialysis, and 70.4±13.6 postdialysis. Total body water was 24.7±2.8 L/m (53.7±8.2% of weight; 22.1±3.0 L (56.2±5.9% of weight corresponded to extracellular water and 17.4±3.8 L/m to intracellular water. Following haemodialysis, total water fell to 22.8±2.4 L/m (51.8±8.6% of weight (23.5±2.2 L in men; and 21.5±3 L in women of which 19.6±2.5 L (54.3±5.8% of weight corresponded to extracellular water and 16.7±3.3 to intracellular water. One man and 5 women exceeded

  5. EVALUACIÓN DEL SECADO DE PEREJIL APLICANDO TÉCNICAS DE DESHIDRATACIÓN OSMÓTICA COMO PRETRATAMIENTO EVALUATION OF PARSLEY DRYING APPLYING OSMOTIC DEHYDRATION TECHNIQUES AS PRETREATMENT

    Directory of Open Access Journals (Sweden)

    Maribel García Mahecha

    2010-12-01

    Full Text Available En este estudio se evaluó el efecto de la temperatura de secado (50 y 60 °C y los diferentes tipos de pretratamientos (sin pretratamiento, deshidratación osmótica y deshidratación osmótica al vacío sobre las características fisicoquímicas y nutricionales del perejil deshidratado, midiendo la actividad de agua, densidad, rehidratación, color, contenido de vitamina C y carotenos. Los resultados mostraron que el secado de perejil a una temperatura de 60 °C sin pretratamiento es el más adecuado, presentando un menor tiempo de proceso (68 min, una mayor reducción en la humedad (4,3% y un menor efecto en los contenidos de vitamina C (8,7 mg de vitamina C/100 g de muestra y carotenos (36,9 mg de carotenos/100 g de muestra. Los procesos de secado con osmodeshidratación como pretratamiento son más lentos, debido a la formación de una capa de jarabe en la superficie de las muestras, la cual dificulta la salida de la humedad del interior de las hojas. El contenido de vitamina C disminuye en todos los procesos, pero es mayor en aquellos con pretratamiento por la solubilidad de la vitamina en el agua. Los carotenos se reducen en una mayor proporción en los procesos que toman mayor tiempo en llegar a la humedad de equilibrio debido a su termosensibilidad.The influence of the drying temperature (50 and 60 °C and the different pretreatments (without pretreatment, osmotic dehydration and vacuum osmotic dehydration were evaluated on the physical, chemical and nutritional characteristics of dried parsley, such as water activity, density, rehydration, color, vitamin C content, and carotene content. The results showed that drying at 60 °C without pretreatment is the best process for drying parsley because the process time (68 min and the moisture content (4,3% are lower and the vitamin C (8,7 mg vitamin C/100 g sample and carotene contents (36,9 mg carotene/100 g sample are less affected. The drying processes with osmodehydration as pretreatment

  6. Dry cell battery poisoning

    Science.gov (United States)

    Batteries - dry cell ... Acidic dry cell batteries contain: Manganese dioxide Ammonium chloride Alkaline dry cell batteries contain: Sodium hydroxide Potassium hydroxide Lithium dioxide dry cell batteries ...

  7. Dry storage of MTR spent fuel from the Argentine radioisotope production reactor RA-3; Proyecto de compactado y reubicacion de los elementos combustibles quemados del RA-3 en el deposito de combustibles MTR del Centro Atomico Ezeiza

    Energy Technology Data Exchange (ETDEWEB)

    Di Marco, A; Gillaume, E J; Ruggirello, G; Zaweruchi, A [Comision Nacional de Energia Atomica, San Martin (Argentina). Unidad de Actividad Combustibles Nucleares

    1997-12-31

    The nuclear fuel elements of the RA-3 reactor consist in 19 rectangular fuel plates held in position by two lateral structural plates. The whole assembly is coupled to the lower nozzles that fits in the reactor core grid. The inner plates are 1.5 mm thick, 70.5 mm wide and 655 mm long and the outer plates are 100 mm longer. The fuel plates are formed by a core of an AI-U alloy co-laminated between two plates of Al. Enrichment is 90% {sup 235}U. After being extracted from the reactor, the fuel elements have been let to cool down in the reactor storage pool and finally moved to the storage facility. This facility is a grid of vertical underground channels connected by a piping system. The system is filled with processed and controlled water. At the present the storage capacity of the facility is near to be depleted and some indications of deterioration of the fuel elements has been detected. Due to the present status of the facility and the spent fuel stored there, a decision has been taken to proceed to modify the present underwater storage to dry storage. The project consist in: a) Decontamination and conditioning of the storage channels to prepare them for dry storage. b) Disassembly of the fuel elements in hot cells in order to can only the active fuel plates in an adequate tight canister. c) The remnant structural pieces will be treated as low level waste. (author). 10 figs.

  8. Criticality and shielding calculations for containers in dry of spent fuel of TRIGA Mark III reactor of ININ; Calculos de criticidad y blindaje para contenedores en seco de combustible gastado del reactor Triga Mark III del ININ

    Energy Technology Data Exchange (ETDEWEB)

    Barranco R, F.

    2015-07-01

    In this thesis criticality and shielding calculations to evaluate the design of a container of dry storage of spent nuclear fuel generated in research reactors were made. The design of such container was originally proposed by Argentina and Brazil, and the Instituto Nacional de Investigaciones Nucleares (ININ) of Mexico. Additionally, it is proposed to modify the design of this container to store spent fuel 120 that are currently in the pool of TRIGA Mark III reactor, the Nuclear Center of Mexico and calculations and analyzes are made to verify that the settlement of these fuel elements is subcritical limits and dose rates to workers and the general public are not exceeded. These calculations are part of the design criteria for security protection systems in dry storage system (Dss for its acronym in English) proposed by the Nuclear Regulatory Commission (NRC) of the United States. To carry out these calculations simulation codes of Monte Carlo particle transport as MCNPX and MCNP5 were used. The initial design (design 1) 78 intended to store spent fuel with a maximum of 115. The ININ has 120 fuel elements and spent 3 control rods (currently stored in the reactor pool). This leads to the construction of two containers of the original design, but for economic reasons was decided to modify (design 2) to store in a single container. Criticality calculations are performed to 78, 115 and fresh fuel elements 124 within the container, to the two arrangements described in Chapter 4, modeling the three-dimensional geometry assuming normal operating conditions and accident. These calculations are focused to demonstrate that the container will remain subcritical, that is, that the effective multiplication factor is less than 1, in particular not greater than 0.95 (as per specified by the NRC). Spent fuel 78 and 124 within the container, both gamma radiation to neutron shielding calculations for only two cases were simulated. First actinides and fission products generated

  9. Dry storage

    International Nuclear Information System (INIS)

    Arnott, Don.

    1985-01-01

    The environmental movement has consistently argued against disposal of nuclear waste. Reasons include its irretrievability in the event of leakage, the implication that reprocessing will continue and the legitimacy attached to an expanding nuclear programme. But there is an alternative. The author here sets out the background and a possible future direction of a campaign based on a call for dry storage. (author)

  10. Kinetic Study of Convective Drying of Blueberry Variety O’neil (Vaccinium corymbosum L. Estudio de la Cinética del Secado Convectivo de Arándano Variedad O’Neil (Vaccinium corymbosum L.

    Directory of Open Access Journals (Sweden)

    A Vega-Gálvez

    2009-06-01

    Full Text Available The aim of this research was to study and to model the drying kinetics of the blueberry Vaccinium corymbosum L. at three temperatures (60, 70 and 80 ºC with an airflow of 2.0 ± 0.2 m s-1. Modeling of the desorption isotherm was carried out with the GAB (Guggenheim, Anderson and de Boer equation, showing a good fit to experimental moisture data, giving as a result a monolayer moisture level of 0.084 g water g-1 dm. Newton, Henderson-Pabis, Page, Modified Page and Logarithmic mathematical models were applied in the study and in the modeling of the drying kinetics of this fruit. Kinetic parameters k of each model showed dependence on temperature, and were evaluated by an Arrhenius-type equation, with an activation energy of between 36.2 and 54.5 kJ mol-1. Logarithmic and Modified Page models gave the best fits for each drying curve, based on the statistical test determination coefficient, sum square error, root mean sum errors and Chi-square. In consequence, both models are excellent tools for estimating the drying time of this product.El objetivo de esta investigación fue estudiar y modelar la cinética de secado del arándano ( Vaccinium corymbosum L. a tres temperaturas (60, 70 y 80 ºC con un flujo de aire de 2,0 ± 0,2 m s-1. El modelado de la isoterma de desorción se llevó a cabo con la ecuación de GAB (Guggenheim, Anderson y de Boer, mostrando un buen ajuste sobre los datos experimentales de humedad, dando como resultado una humedad de la monocapa de 0,084 g de agua g-1 ms. Se aplicaron los modelos matemáticos de Newton, Henderson-Pabis, Page, Page modificado y Logarítmico para el modelado de la cinética de secado de esta fruta. Los parámetros cinéticos k de cada modelo presentaron dependencia con la temperatura, evaluadas por una ecuación de tipo Arrhenius, con una energía de activación entre 36,2-54,5 kJ mol-1. Los modelos Logarítmico y Page modificado obtuvieron el mejor ajuste para cada curva de secado, basado en las

  11. Overseas processing of dried blood spots for timely diagnosis of HIV in Haitian infants Diagnóstico oportuno del VIH en niños haitianos mediante el procesamiento en el extranjero de muestras de sangre seca

    Directory of Open Access Journals (Sweden)

    Louise C. Ivers

    2008-11-01

    Full Text Available OBJECTIVE: To determine the feasibility of sending dried blood spots (DBS to an overseas processing center for the diagnosis of HIV infection in infants in rural Haiti. METHODS: The program took place in the Central Department of Haiti. Children under 18 months of age who were born to an HIV-infected mother or who had a positive HIV antibody test had blood collected on filter paper. Once dry, specimens were labeled with a unique identifying number, placed in sealed gas-impermeable envelopes containing a desiccant, stored at room temperature, and mailed to a commercial laboratory in The Netherlands, where blood was eluted from the filter paper and analyzed by the RetinaTM rainbow HIV-1 RNA assay. Infants were tested at 1 month of age and again at 4 months of age. RESULTS: The DBS protocol was easily scaled up. During the study period, 138 infants had HIV status confirmed; 15 of them were found to be HIV infected and were enrolled in appropriate HIV care, and 123 were confirmed to be HIV uninfected, avoiding unnecessary prophylactic antibiotics and providing reassurance to caregivers. CONCLUSION: Central, overseas processing of DBS is a feasible solution for the timely diagnosis of HIV infection in infants where local capacity is unavailable. Regional processing centers for DBS could improve the access of millions of children in Latin America and the Caribbean to timely diagnosis of HIV infection.OBJETIVO: Determinar la factibilidad de enviar muestras de sangre seca (MSS a un centro en el extranjero para el diagnóstico de la infección por el VIH en niños de zonas rurales de Haití. MÉTODOS: El programa se realizó en el Departamento Central de Haití. Se tomó una muestra de sangre en papel de filtro de los niños menores de 18 meses nacidos de madres infectadas con el VIH o que tuvieran una prueba positiva de anticuerpos contra el VIH. Una vez secas, las muestras se etiquetaron con un número de identificación único, se colocaron en sobres

  12. Influence of double cropping on growth and yield of dry beans with colored plastic mulches Influencia del doble cultivo en el crecimiento y rendimiento de frijol con cubierta plástica de colores

    Directory of Open Access Journals (Sweden)

    Luis Ibarra-Jiménez

    2012-12-01

    Full Text Available There are numerous studies of the use of plastic mulches in vegetable production, but there is little documentation of their use with dry beans (Phaseolus vulgaris L. in single and double cropping. The objective of this study was to grow dry beans over two consecutive growing seasons using the same plastic mulch of different colors and examine the influence of soil temperature on growth and yield. The experiment was conducted in Saltillo, Coahuila, Mexico, in the spring and summer of 2008. The treatments included four colored plastic mulches: white-on-black, black, silver-on-black, aluminum-on-black, and bare soil as a control. The experimental design was a randomized complete block with four replicates. The percentage of photosynthetically active radiation (PAR reflected from the plastic tended to be highest with the white-on-black mulch and lowest with the black mulch. Mean soil temperature under the plastic mulch decreased with the increasing percentage of reflected PAR. Mean soil temperature exhibited a relationship of 98% and 99% to yield in the first and second growing season, respectively. Photosynthetically active radiation had a relationship of 98% and 86% to yield in the first and second growing season, respectively. The effect of the colored plastic mulch on yield was significant (p Existen numerosos estudios sobre el uso de cubierta plástica en la producción de hortalizas, sin embargo está muy poco documentado el cultivo simple o doble de frijol (Phaseolus vulgaris L.. El objetivo de este estudio fue cultivar frijol en dos estaciones de crecimiento consecutivas usando la misma cubierta plástica de diferentes colores y examinar la influencia de la temperatura del suelo en el crecimiento y rendimiento de frijol. El estudio fue conducido en Saltillo, Coahuila, México, en la primavera y verano de 2008. Se usaron cuatro colores de acolchado plástico: blanco-sobre-negro, negro, plata-sobre-negro, aluminio-sobre-negro, y control de

  13. What Is Dry Eye?

    Medline Plus

    Full Text Available ... Stories Español Eye Health / Eye Health A-Z Dry Eye Sections What Is Dry Eye? Dry Eye Symptoms ... of Dry Eye Dry Eye Treatment What Is Dry Eye? Leer en Español: ¿Qué es el ojo seco? ...

  14. What Is Dry Eye?

    Medline Plus

    Full Text Available ... Español Eye Health / Eye Health A-Z Dry Eye Sections What Is Dry Eye? Dry Eye Symptoms ... Dry Eye Dry Eye Treatment What Is Dry Eye? Leer en Español: ¿Qué es el ojo seco? ...

  15. What Is Dry Eye?

    Medline Plus

    Full Text Available ... Eye? Dry Eye Symptoms Causes of Dry Eye Dry Eye Treatment What Is Dry Eye? Leer en Español: ¿Qué ... Inside of Your Eyelid Nov 29, 2017 New Dry Eye Treatment is a Tear-Jerker Jul 21, 2017 Three ...

  16. What Is Dry Eye?

    Science.gov (United States)

    ... Eye? Dry Eye Symptoms Causes of Dry Eye Dry Eye Treatment What Is Dry Eye? Leer en Español: ¿Qué ... Inside of Your Eyelid Nov 29, 2017 New Dry Eye Treatment is a Tear-Jerker Jul 21, 2017 Three ...

  17. What Is Dry Eye?

    Medline Plus

    Full Text Available ... Ophthalmology/Strabismus Ocular Pathology/Oncology Oculoplastics/Orbit Refractive Management/Intervention Retina/Vitreous Uveitis Focus On ... Dry Eye Sections What Is Dry Eye? Dry Eye Symptoms Causes of ...

  18. What Is Dry Eye?

    Medline Plus

    Full Text Available ... Eye Symptoms Causes of Dry Eye Dry Eye Treatment What Is Dry Eye? Leer en Español: ¿Qué ... Your Eyelid Nov 29, 2017 New Dry Eye Treatment is a Tear-Jerker Jul 21, 2017 Three ...

  19. Drying of building lumber

    Energy Technology Data Exchange (ETDEWEB)

    Washimi, Hiroshi

    1988-08-20

    Dried lumber is classified into air dried and kiln-dried lumber. The water content of kiln-dried lumber is specified by the Japan Agricultural Standards. However, since building lumber varies in such factors as the location where it was growing, species and shape, the standards, though relaxed, are not being observed. In fact, lumbered products which are not ''Kiln-dried'' frequently bear ''kiln-dried lumber'' marks. In an attempt to correct the situation, the Forestry Agency has set up voluntary standards, but problems still remain. The conventional drying method consists of first subjecting the lumber to optimum drying, then letting bending and deformations to freely and fully appear, and follow this with corrective sawing to produce planks straight from end to end. Compared with air dried lumber in terms of moisture content, kiln-dried lumber remains much with same with minimal shrinkage and expansion. For oil-containing resin, such normal treatments as drying by heating, steaming and boiling seem to be quite effective. Kiln drying, which is becoming more and more important with changes in the circulation system, consists of the steaming-drying-heating method and the dehumidizing type drying method. The major factor which determines the drying cost is the number of days required for drying, which depends largely on the kind of lumber and moisture content. The Forestry Angency is promoting production of defoiled lumber. (2 figs, 2 tables)

  20. Flank wear study of coating carbides and cermet inserts during the dry high speed turning of AISI 1045 steel; Estudio del desgaste del flanco de carburos recubiertos y cermet durante el torneado de alta velocidad en seco del acero AISI 1045

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez-Gonzalez, L. W.; Perez-Rodriguez, R.; Zambrano-Robledo, P.; Guerrero-Mata, M.; Dumitrescu, L.

    2011-07-01

    This work deals with the experimental study of the flank wear evolution of two coating carbide inserts and a cermet insert during the dry finishing turning of AISI 1045 steel with 400, 500 and 600 m/min cutting speeds. The results were analyzed using the variance analysis and lineal regression analysis in order to describe the relationship between the flank wear and machining time, obtaining the adjusted model equation. The investigation demonstrated a significant effect of cutting speed and machining time on the flank wear at high speed machining. The three coating layers insert showed the best performance while the two layers insert had the worst behaviour of the cutting tool wear at high cutting speeds. (Author) 19 refs.

  1. Applied research on thermalmechanics of dry stored fuel: CIEMAT response to challenge; Investigación aplicada sobre termo-mecánica de combustible almacenado en seco: respuesta del CIEMAT a desafíos

    Energy Technology Data Exchange (ETDEWEB)

    Feria, F.; Penalva, J.; Herranz, L.E.

    2016-07-01

    The research on safety of dry stored nuclear fuel poses a number of challenges related to understand and predict its performance under the anticipated conditions. A focus of interest is the development of analysis capabilities that allow predicting the integrity of the fuel rod cladding. In this regard, the research carried out by CIEMAT is allowing the use of analytical tools and analysis methodologies whereby the compliance of the related safety goals would be assessed. To do so, the experience gained in fuel rod thermalmechanics in reactor is being extended to the dry storage technology.

  2. Dry Mouth (Xerostomia)

    Science.gov (United States)

    ... Finding Dental Care Home Health Info Health Topics Dry Mouth Saliva, or spit, is made by the salivary ... help keep teeth strong and fight tooth decay. Dry mouth, also called xerostomia (ZEER-oh-STOH-mee-ah), ...

  3. What Is Dry Eye?

    Medline Plus

    Full Text Available ... Dry Eye Symptoms Related Ask an Ophthalmologist Answers Can a six-month dissolvable punctal plug be removed ... my eyes dry after LASIK? Jun 19, 2016 Can I be tested whether I close my eyes ...

  4. What Is Dry Eye?

    Medline Plus

    Full Text Available ... Eye Health A-Z Symptoms Glasses & Contacts Tips & Prevention News Ask an Ophthalmologist Patient Stories Español Eye ... Eye Symptoms Causes of Dry Eye Dry Eye Treatment What Is Dry Eye? Leer en Español: ¿Qué ...

  5. Dry and Semi-Dry Tropical Cyclones

    Science.gov (United States)

    Cronin, T.; Chavas, D. R.

    2017-12-01

    Our understanding of dynamics in our real moist atmosphere is strongly informed by idealized dry models. It is widely believed that tropical cyclones (TCs) are an intrinsically moist phenomenon - relying fundamentally on evaporation and latent heat release - yet recent numerical modeling work has found formation of dry axisymmetric tropical cyclones from a state of dry radiative-convective equilibrium. What can such "dry hurricanes" teach us about intensity, structure, and size of real moist tropical cyclones in nature? Are dry TCs even stable in 3D? What about surfaces that are nearly dry but have some latent heat flux - can they also support TCs? To address these questions, we use the SAM cloud-system resolving model to simulate radiative-convective equilibrium on a rapidly rotating f-plane, subject to constant tropospheric radiative cooling. We use a homogeneous surface with fixed temperature and with surface saturation vapor pressure scaled by a factor 0-1 relative to that over pure water - allowing for continuous variation between moist and dry limits. We also explore cases with surface enthalpy fluxes that are uniform in space and time, where partitioning between latent and sensible heat fluxes is specified directly. We find that a completely moist surface yields a TC-world where multiple vortices form spontaneously and persist for tens of days. A completely dry surface can also yield a parallel dry TC-world with many vortices that are even more stable and persistent. Spontaneous cyclogenesis, however, is impeded for a range of low to intermediate surface wetness values, and by the combination of large rotation rates and a dry surface. We discuss whether these constraints on spontaneous cyclogenesis might arise from: 1) rain evaporation in the subcloud layer limiting the range of viable surface wetness values, and 2) a natural convective Rossby number limiting the range of viable rotation rates. Finally, we discuss simulations with uniform surface enthalpy

  6. Peces del Noroeste del Ecuador

    OpenAIRE

    Barriga, Ramiro

    1994-01-01

    La ictiofauna del occidente del Ecuador es poco conocida. Los peces del noroccidente son diferentes a los del suroccidente del Ecuador. 34 familias y 82 especies fueron colectadas que equivale al 11 % de las especies de peces continentales registradas en el Ecuador. Icteogeográficamente se sabe que la costa ecuatoriana posee dos provincias: la del Pacifico Norte y la del Guayas, se determinó que el límite de las dos provincias es el río Santiago ya que las especies del mencionado río so...

  7. Dry vacuum pumps

    International Nuclear Information System (INIS)

    Sibuet, R

    2008-01-01

    For decades and for ultimate pressure below 1 mbar, oil-sealed Rotary Vane Pumps have been the most popular solution for a wide range of vacuum applications. In the late 80ies, Semiconductor Industry has initiated the development of the first dry roughing pumps. Today SC applications are only using dry pumps and dry pumping packages. Since that time, pumps manufacturers have developed dry vacuum pumps technologies in order to make them attractive for other applications. The trend to replace lubricated pumps by dry pumps is now spreading over many other market segments. For the Semiconductor Industry, it has been quite easy to understand the benefits of dry pumps, in terms of Cost of Ownership, process contamination and up-time. In this paper, Technology of Dry pumps, its application in R and D/industries, merits over conventional pumps and future growth scope will be discussed

  8. Drying and energy technologies

    CERN Document Server

    Lima, A

    2016-01-01

    This book provides a comprehensive overview of essential topics related to conventional and advanced drying and energy technologies, especially motivated by increased industry and academic interest. The main topics discussed are: theory and applications of drying, emerging topics in drying technology, innovations and trends in drying, thermo-hydro-chemical-mechanical behaviors of porous materials in drying, and drying equipment and energy. Since the topics covered are inter- and multi-disciplinary, the book offers an excellent source of information for engineers, energy specialists, scientists, researchers, graduate students, and leaders of industrial companies. This book is divided into several chapters focusing on the engineering, science and technology applied in essential industrial processes used for raw materials and products.

  9. Ambient Dried Aerogels

    Science.gov (United States)

    Jones, Steven M.; Paik, Jong-Ah

    2013-01-01

    A method has been developed for creating aerogel using normal pressure and ambient temperatures. All spacecraft, satellites, and landers require the use of thermal insulation due to the extreme environments encountered in space and on extraterrestrial bodies. Ambient dried aerogels introduce the possibility of using aerogel as thermal insulation in a wide variety of instances where supercritically dried aerogels cannot be used. More specifically, thermoelectric devices can use ambient dried aerogel, where the advantages are in situ production using the cast-in ability of an aerogel. Previously, aerogels required supercritical conditions (high temperature and high pressure) to be dried. Ambient dried aerogels can be dried at room temperature and pressure. This allows many materials, such as plastics and certain metal alloys that cannot survive supercritical conditions, to be directly immersed in liquid aerogel precursor and then encapsulated in the final, dried aerogel. Additionally, the metalized Mylar films that could not survive the previous methods of making aerogels can survive the ambient drying technique, thus making multilayer insulation (MLI) materials possible. This results in lighter insulation material as well. Because this innovation does not require high-temperature or high-pressure drying, ambient dried aerogels are much less expensive to produce. The equipment needed to conduct supercritical drying costs many tens of thousands of dollars, and has associated running expenses for power, pressurized gasses, and maintenance. The ambient drying process also expands the size of the pieces of aerogel that can be made because a high-temperature, high-pressure system typically has internal dimensions of up to 30 cm in diameter and 60 cm in height. In the case of this innovation, the only limitation on the size of the aerogels produced would be in the ability of the solvent in the wet gel to escape from the gel network.

  10. Dry etching for microelectronics

    CERN Document Server

    Powell, RA

    1984-01-01

    This volume collects together for the first time a series of in-depth, critical reviews of important topics in dry etching, such as dry processing of III-V compound semiconductors, dry etching of refractory metal silicides and dry etching aluminium and aluminium alloys. This topical format provides the reader with more specialised information and references than found in a general review article. In addition, it presents a broad perspective which would otherwise have to be gained by reading a large number of individual research papers. An additional important and unique feature of this book

  11. Inflammation in dry eye.

    Science.gov (United States)

    Stern, Michael E; Pflugfelder, Stephen C

    2004-04-01

    Dry eye is a condition of altered tear composition that results from a diseased or dysfunctional lacrimal functional unit. Evidence suggests that inflammation causes structural alterations and/or functional paralysis of the tear-secreting glands. Changes in tear composition resulting from lacrimal dysfunction, increased evaporation and/or poor clearance have pro-inflammatory effects on the ocular surface. This inflammation is responsible in part for the irritation symptoms, ocular surface epithelial disease, and altered corneal epithelial barrier function in dry eye. Anti-inflammatory therapies for dry eye target one or more of the inflammatory mediators/pathways that have been identified in dry eye.

  12. Drying hardwood lumber

    Energy Technology Data Exchange (ETDEWEB)

    Chow, A T

    1988-11-14

    Dried lumber is a high-value-added product, especially when it is of high quality. Lumber damaged during the drying operation can represent substantial lost revenue. It has been demonstrated that dehumidification kilns can improve lumber quality, and reduce energy consumption over conventional drying methods. A summary of the literature on drying hardwood lumber, particularly using heat pump dehumidification, has been prepared to allow the information to be readily accessible to Ontario Hydro personnel who work with customers in the lumber industry. For that purpose, this summary has been prepared from the perspective of the customer, a dry kiln operator. Included are brief descriptions of drying schedules, precautions needed to minimize drying defects in the lumber, and rules-of-thumb for selecting and estimating the capital cost of the drying equipment. A selection of drying schedules and moisture contents of green lumber, a glossary of lumber defects and brief descriptions of the possible preventive measures are also included. 10 refs., 8 figs., 4 tabs.

  13. Temporary storage in dry of the spent nuclear fuel in the Nuclear Power Plant of Laguna Verde; Almacenamiento temporal en seco del combustible nuclear gastado en la Central Nuclear Laguna Verde

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez M, N.; Vargas A, A., E-mail: natividad.hernandez@cfe.gob.mx [Comision Federal de Electricidad, Gerencia de Centrales Nucleoelectricas, Carretera Veracruz-Medellin Km. 7.5, 94270 Dos Bocas, Veracruz (Mexico)

    2013-10-15

    To guarantee the continuity in the operation of the two nuclear reactors of the nuclear power plant of Laguna Verde (NPP-L V) is an activity of high priority of the Comision Federal de Electricidad (CFE) in Mexico. At the present time, the CFE is working in the storage project in dry of the spent fuel with the purpose of to liberate space of the pools and to have the enlarged capacity of storage of the spent fuel that is discharged of the reactors. This work presents the storage option in dry of the spent fuel, considering that the original capacity of the spent fuel pools of the NPP-L V was of 1242 spaces each one and that in 1991, through a modification of the original design, the storage capacity was increased to 3177 spaces by pool. At present, the cells occupied by unit are of 2165 (68%) for the Unit-I and 1839 (58%) for the Unit-2, however, in 2017 and 2022 the capacity to discharge the complete core will be limited by what is required of a retirement option of spent fuel assemblies to liberate spaces. (author)

  14. Artificial neural network based model to calculate the environmental variables of the tobacco drying process; Modelo basado en redes neuronales artificiales para el cálculo de parámetros ambientales en el proceso de curado del tabaco

    Directory of Open Access Journals (Sweden)

    Víctor Martínez-Martínez

    2013-06-01

    Full Text Available This paper presents an Artificial Neural Network (ANN based model for environmental variables related to the tobacco drying process. A fitting ANN was used to estimate and predict temperature and relative humidity inside the tobacco dryer: the estimation consists of calculating the value of these variables in different locations of the dryer and the prediction consists of forecasting the value of these variables with different time horizons. The proposed model has been validated with temperature and relative humidity data obtained from a real tobacco dryer using a Wireless Sensor Network (WSN. On the one hand, an error under 2% was achieved, obtaining temperature as a function of temperature and relative humidity in other locations in the estimation task. Besides, an error around 1.5 times lower than the one obtained with an interpolation method was achieved in the prediction task when the temperature inside the tobacco mass was predicted with time horizons over 2.5 hours as a function of its present and past values. These results show that ANN-based models can be used to improve the tobacco drying process because with these types of models the value of environmental variables can be predicted in the near future and can be estimated in other locations with low errors.

  15. What Is Dry Eye?

    Medline Plus

    Full Text Available ... Tips & Prevention News Ask an Ophthalmologist Patient Stories Español Eye Health / Eye Health A-Z Dry Eye ... Eye Treatment What Is Dry Eye? Leer en Español: ¿Qué es el ojo seco? Written By: Kierstan ...

  16. Dry eye syndrome

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/article/000426.htm Dry eye syndrome To use the sharing features on this page, ... second-hand smoke exposure Cold or allergy medicines Dry eye can also be caused by: Heat or ... Symptoms may include: Blurred vision Burning, itching, ...

  17. Dry Mouth (Xerostomia)

    Science.gov (United States)

    ... mouth Trouble chewing, swallowing, tasting, or speaking A burning feeling in the mouth A dry feeling in the throat Cracked lips ... Food and Drug Administration provides information on dry mouth and offers advice for ... Syndrome Clinic NIDCR Sjogren’s Syndrome Clinic develops new therapies ...

  18. Studies on drying kinetics of olive foot cake

    Directory of Open Access Journals (Sweden)

    Hamlat, M. S.

    2002-06-01

    Full Text Available The olive foot cake is a very important by-product of olive oil industry since it can contain until 12 % of oil which can be extracted using solvent. The used solvent is often immiscible with water. This is the reason why its effect is limited by the moisture of olive foot cake making its drying imperative. In this paper, we present the behaviour of olive foot cake subjected to convective drying. The experimental results show that the drying rate versus moisture presents only one period of decreasing rate. The influence of the main parameters on drying kinetics is studied.El orujo es un importante subproducto de la industria del aceite de oliva ya que puede contener hasta el 12 % del aceite, el cual puede ser extraído usando un disolvente apropiado. El uso del disolvente es a menudo inmiscible con el agua. Esta es la razón por la que su efecto está limitado por la humedad del orujo, haciendo su secado imperativo. En este artículo se presenta el comportamiento del orujo sometido a un secado por convección. Los resultados experimentales mostraron que la velocidad de secado frente a la humedad, presenta un solo período de disminución de dicha velocidad. Se ha estudiado la influencia de los principales parámetros sobre la cinética de secado.

  19. Dry well cooling device

    International Nuclear Information System (INIS)

    Suzuki, Hiroyuki.

    1997-01-01

    A plurality of blowing ports with introduction units are disposed to a plurality of ducts in a dry well, and a cooling unit comprising a cooler, a blower and an isolating valve is disposed outside of the dry well. Cooling air and the atmosphere in the dry well are mixed to form a cooling gas and blown into the dry well to control the temperature. Since the cooling unit is disposed outside of the dry well, the maintenance of the cooling unit can be performed even during the plant operation. In addition, since dampers opened/closed depending on the temperature of the atmosphere are disposed to the introduction units for controlling the temperature of the cooling gas, the temperature of the atmosphere in the dry well can be set to a predetermined level rapidly. Since an axial flow blower is used as the blower of the cooling unit, it can be contained in a ventilation cylinder. Then, the atmosphere in the dry well flowing in the ventilation cylinder can be prevented from leaking to the outside. (N.H.)

  20. Characteristics of Timbers Dried Using Kiln Drying and Radio Frequency-Vacuum Drying Systems

    OpenAIRE

    Rabidin Zairul Amin; Seng Gan Kee; Wahab Mohd Jamil Abdul

    2017-01-01

    Heavy hardwoods are difficult-to-dry timbers as they are prone to checking and internal stresses when dried using a conventional kiln drying system. These timbers are usually dried naturally to reach 15% to 19% moisture content with an acceptable defects. Besides long drying time, timbers at these moisture contents are not suitable for indoor applications since they will further dry and causing, for example, jointing and lamination failures. Drying to a lower moisture content could only be ac...

  1. What Is Dry Eye?

    Medline Plus

    Full Text Available ... seasonal allergens and dry eye Apr 27, 2015 Choosing Wisely When It Comes to Eye Care, Part ... Name: Member ID: * Phone Number: * Email: * Enter code: * Message: Thank you Your feedback has been sent.

  2. What Is Dry Eye?

    Medline Plus

    Full Text Available ... month dissolvable punctal plug be removed or pushed down the tear duct to insert a permanent punctal ... Your Eyelid Nov 29, 2017 New Dry Eye Treatment is a Tear-Jerker Jul 21, 2017 Three ...

  3. Dry Skin Relief

    Science.gov (United States)

    ... on a budget Skin care products Skin care secrets Skin lighteners Skin of color Summer skin problems ... condition, such as eczema. Additional related information Dermatologists' top tips for relieving dry skin FIND A DERMATOLOGIST ...

  4. Dry process potentials

    International Nuclear Information System (INIS)

    Faugeras, P.

    1997-01-01

    Various dry processes have been studied and more or less developed in order particularly to reduce the waste quantities but none of them had replaced the PUREX process, for reasons departing to policy errors, un-appropriate demonstration examples or too late development, although realistic and efficient dry processes such as a fluoride selective volatility based processes have been demonstrated in France (CLOVIS, ATILA) and would be ten times cheaper than the PUREX process. Dry processes could regain interest in case of a nuclear revival (following global warming fears) or thermal wastes over-production. In the near future, dry processes could be introduced in complement to the PUREX process, especially at the end of the process cycle, for a more efficient recycling and safer storage (inactivation)

  5. Freeze drying method

    International Nuclear Information System (INIS)

    Coppa, N.V.; Stewart, P.; Renzi, E.

    1999-01-01

    The present invention provides methods and apparatus for freeze drying in which a solution, which can be a radioactive salt dissolved within an acid, is frozen into a solid on vertical plates provided within a freeze drying chamber. The solid is sublimated into vapor and condensed in a cold condenser positioned above the freeze drying chamber and connected thereto by a conduit. The vertical positioning of the cold condenser relative to the freeze dryer helps to help prevent substances such as radioactive materials separated from the solution from contaminating the cold condenser. Additionally, the system can be charged with an inert gas to produce a down rush of gas into the freeze drying chamber to also help prevent such substances from contaminating the cold condenser

  6. What Is Dry Eye?

    Medline Plus

    Full Text Available ... removed or pushed down the tear duct to insert a permanent punctal plug? Sep 12, 2017 Why ... Eye from Jennifer Aniston Sep 02, 2016 The link between seasonal allergens and dry eye Apr 27, ...

  7. Cold Vacuum Drying Facility

    Data.gov (United States)

    Federal Laboratory Consortium — Located near the K-Basins (see K-Basins link) in Hanford's 100 Area is a facility called the Cold Vacuum Drying Facility (CVDF).Between 2000 and 2004, workers at the...

  8. Study of Combined Treatment for Damp-Harvested Maize: Gamma Irradiation and Drying by Controlled Ventilation; Etude d'un Traitement Combine pour le Conditionnement du Mais Recolte Humide: Irradiation Gamma et Sechage par Ventilation Controlee; Izuchenie kombinirovannoj obrabotki kukuruzy molochno-voskovoj spelosti; Estudio de un Tratamiento Combinado para el Acondicionamiento del Maiz Recolectado Humedo: Irradiacion Gamma y Secado por Ventilacion Controlada

    Energy Technology Data Exchange (ETDEWEB)

    Saint-Lebe, L.; Pelegrin, P. [Centre d' Etudes Nucleaires de Cadarache (France); Guilbot, A. [Institut National de la Recherche Agronomique, Massy (France)

    1966-11-15

    The purpose of combining the effects of gamma irradiation from {sup 60}Co and of slow drying by cool ventilation (10-25 Degree-Sign C) in storage chambers is to replace the standard technique of rapid drying with high temperature air by a treatment which is less likely to damage the grain and also disinfects at the microbiological level. In France, one million tons of damp maize are involved (1964); the problem is to be regarded as one of increasing importance both in Europe and in tropical countries. The authors first study the direct effect of gamma radiation on the yield and technical characteristics of the starch. The latter is extracted from the maize by a laboratory method which faithfully and accurately reproduces industrial conditions. Radiation doses of less than 500 krad are found to have no effect on the extraction yield, whereas drying at 74 Degree-Sign C lowers the yield by about 4% because of the partial coagulation of the protein network and the bursting of starch granules. The slight changes in structure of the irradiated starch are in most cases advantageous from the viewpoint of further treatment of the product. They may lead to the development of a test to ascertain whether the starch or the maize have been irradiated. Microbiological analysis techniques suitable for defining the optimum conditions for radiopasteuriz- ation of maize in relation to the environment were developed. Armed with these data, the authors attacked the problem of combined irradiation-ventilation treatment on a laboratory scale under experimental conditions easy to transpose to the industrial level. They studied the microbiological and biochemical changes occurring in the fraction of moist grains reached last by the drying air flow, which corresponds to the most unfavourable case. From a quantitative point of view, it appears that in this zone the depressive effect of radiation on the mycoflora persists even after 26 days, and the effect on bacteria is even more pronounced

  9. Study of volatile alcohols and esters from the subcutaneous fat during ripening of Iberian dry-cured ham. A tool for predicting the dry-curing time; Estudio de los alcoholes y ésteres volátiles de la grasa subcutánea durante la maduración del jamón ibérico. Una herramienta para predecir el tiempo de curación

    Energy Technology Data Exchange (ETDEWEB)

    Narvaez-Rivas, M.; Gallardo, E.; Leon-Camacho, M.

    2016-07-01

    Variations in the amounts of volatile alcohols and esters from subcutaneous fat have been assessed during the dry-curing process (1022 days) of Iberian ham according to a purge and trap-gas chromatography-mass spectroscopy method, using the same hams throughout the process. During processing time, the subcutaneous adipose tissues of ten hams obtained from five Iberian pigs fed on acorns and pasture were sampled and analyzed once per month. Fifteen alcohols and five esters have been identified. All volatile alcohols detected in this work have been previously identified by other authors on Iberian ham, except 3-buten-2-ol, 5-methyl-3-hexanol and 2-isononanol. A linear discriminant analysis (LDA) was applied and the two discriminant functions were obtained using backward stepwise analysis retaining the following variables: butyl ester formic acid, 1-penten-3-ol, methyl ester 2-propenoic acid, 5-methyl-3-hexanol, 1-nonanol, ethyl ester pentanoic acid, ethyl ester hexanoic acid, 2-isononanol, ethanol and 3-buten-2-ol. A complete separation among the three periods was obtained, suggesting that the retained variables are powerful descriptors to distinguish samples from these three dry-curing stages. [Spanish] Se han evaluado durante el proceso de curación (1022 días), las variaciones en los contenidos de alcoholes y ésteres volátiles de la grasa subcutánea del jamón ibérico mediante la técnica de acoplamiento purga y trampa- cromatografía de gases-espectrometría de masas, utilizando los mismos jamones a lo largo de todo el proceso. Durante el tiempo de curación se muestreó y analizó una vez al mes el tejido adiposo subcutáneo de diez jamones procedente de cinco cerdos ibéricos alimentados con bellotas y pastos. Se han identificado quince alcoholes y cinco ésteres volátiles. Todos los alcoholes descritos en este trabajo han sido identificados previamente por otros autores en el jamón ibérico, excepto el 3-buten-2-ol, el 5-metil-3-hexanol y el 2

  10. Materia seca nodular y nitrógeno acumulado en el cultivo de soja en función de la disponibilidad de agua y azufre, y del sistema de labranza Nodular dry matter and accumulated nitrogen in soybean as a function of water and sulfur availability and tillage system

    Directory of Open Access Journals (Sweden)

    Pablo Cicore

    2005-12-01

    Full Text Available La material seca nodular (MSN y el nitrógeno acumulado (N-acum. en el cultivo de soja fueron evaluados en función del sistema de labranza [siembra directa (SD y labranza convencional (LC] y la disponibilidad de azufre (S. Para ello, se realizaron en Balcarce durante la campaña 2002-03 dos experimentos, uno conducido bajo riego (Ri y otro en secano (Se. La MSN determinada en R5 no fue afectada por la aplicación de S (P>0.10, sin embargo fue mayor bajo SD en Se (PNodular dry matter (NDM and accumulated nitrogen (AN in a soybean crop were evaluated as a function of tillage system [no-tillage (NT and conventional tillage(CT] and sulfur (S availability in two experiments carried out under irrigation (Ri and rainfed conditions (Se. The experiment was carried out at Balcarce in the 2002-2003 growing season. The NDM, determined at R5 stage, was not affected by S fertilization (P>0.10 but was higher under NT in Se (P< 0.05. Under Ri NDM was higher under NT but this difference was not significant. The AN was not affected by S fertilization, and under rainfed conditions, it was significantly lower (P<0.05 under CT. The AN was positively related with NDM but the r² value was low (36%, suggesting that NDM was not the only factor regulating biological N2-fixation.

  11. Drying of Concrete

    DEFF Research Database (Denmark)

    Hansen, Kurt Kielsgaard; Geiker, Mette Rica; Nygaard, Peter Vagn

    2002-01-01

    Estimated and measured relative humidity (RH) change during drying are compared for two concretes, 1: w/c=0.46 and 2: w/(c+0.5fa+2sf)=0.50. The estimations were undertaken by means of the Swedish program TorkaS 1.0. Measurements were performed by RH-sensors type Humi-Guard. Drying of 150 mm thick...... samples from sides at 60% RH and 22 °C took place from 4 to 56 days after casting. At the end of the drying period the measured RH was about 4% lower than the estimated RH at 1/5th depth from the exposed surface for both concretes. In the middle of the samples, the measured RH of concretes 1 and 2 were 2...

  12. Pecan drying with silica gel

    Energy Technology Data Exchange (ETDEWEB)

    Ghate, S.R.; Chhinnan, M.S.

    1983-07-01

    High moisture in-shell pecans were dried by keeping them in direct and indirect contact with silica gel to investigate their drying characteristics. In-shell pecans were also dried with ambient air from a controlled environment chamber and with air dehumidified by silica gel. Direct contact and dehumidified air drying seemed feasible approaches.

  13. Feeding Dry Olive Cake Modifies Subcutaneous Fat Composition in Lambs, Noting Cake Resistance to Degradation and Peroxidation Alimentación con Alperujo Modifica la Composición de Grasa Subcutánea en Corderos, con una Nota en la Resistencia del Alperujo a Degradación y Peroxidación

    Directory of Open Access Journals (Sweden)

    Raúl Vera

    2009-12-01

    Full Text Available The purpose of this experiment was to determine the extent to which lamb carcass quality and fat composition could be altered by applying a dry olive cake-based ration instead of a conventional ration or pasture feeding. Three treatments were compared in a completely randomized experiment using 36 single male Suffolk Down lambs with an initial age and live weight of 80 d and 25 kg, respectively. The three treatments were: (a suckling lambs kept with their mothers on annual Mediterranean grassland (GRAZE; (b weaned stall-fed lambs on a control ration (CONC; and (c weaned stall-fed lambs on an olive cake-based ration (CAKE. At the end of the 28-d experimental period, lambs were slaughtered, carcass quality evaluated, and samples of subcutaneous fat analyzed for fatty acids. Treatments did not differ in weight gain or carcass weight and quality, but highly significant differences were found in several fatty acid contents. CAKE animals had reduced palmitic acid as well as increased oleic and stearic acid contents. Atherogenic and thrombogenic indices improved with cake feeding. Principal component and discriminant analyses clearly differentiated treatments suggesting they could be applicable for traceability purposes. A laboratory experiment demonstrated that with or without added vitamin E, the dry olive cake did not alter its lipid properties with increased storage time.El propósito del experimento aquí reportado fue determinar en qué grado se puede modificar la composición y calidad de la carcasa de corderos con el suministro de una ración basada en el alperujo de oliva, en comparación con una ración convencional o con el pastoreo directo. Se compararon tres tratamientos usando un diseño completamente al azar con 36 corderos machos Suffolk Down de partos únicos, y con edad y peso inicial de 80 d y 25 kg, respectivamente. Los tres tratamientos consistieron en; (a corderos lactantes mantenidos con sus madres en una pastura anual de tipo

  14. PROPOSAL FOR THE IMPLEMENTATION OF SPRAY DRYING IN THE ACTIVATION PROCESS OF BENTONITE WITH SULFURIC ACID

    OpenAIRE

    Romero, P.; Otiniano, M.

    2014-01-01

    The present work propose the replacement of the three stages of the activation process of bentonite with sulfuric acid by the only stage spray drying. El presente trabajo propone reemplazar tres etapas del proceso de activación de la bentonita con ácido sulfúrico por una sola etapa, la del secado por atomización.

  15. Characteristics of Timbers Dried Using Kiln Drying and Radio Frequency-Vacuum Drying Systems

    Directory of Open Access Journals (Sweden)

    Rabidin Zairul Amin

    2017-01-01

    Full Text Available Heavy hardwoods are difficult-to-dry timbers as they are prone to checking and internal stresses when dried using a conventional kiln drying system. These timbers are usually dried naturally to reach 15% to 19% moisture content with an acceptable defects. Besides long drying time, timbers at these moisture contents are not suitable for indoor applications since they will further dry and causing, for example, jointing and lamination failures. Drying to a lower moisture content could only be achieved in artificial drying kilns such as conventional kiln, dehumidification kiln, solar kiln, radio frequency-vacuum, etc. The objective of this study was to evaluate the characteristics of 30 mm and 50 mm thick kekatong (Cynometra spp. timber dried using kiln drying (KD and radio frequency-vacuum drying (RFV system. The investigation involved drying time, moisture content (MC variations between and within boards, drying defects, shrinkage, and drying stress. Drying defects include checks (surface, end, and internal checks and warping (bowing, cuping, spring, and twisting. The results showed that RFV drying time was reduced to 50% compared to the KD. RFV dried boards demonstrated a more uniform MC between and within boards. Shrinkage in width and thickness, as well as tangential/radial and volumetric shrinkages were substantially less in RFV boards. The amount of cupping, bowing and spring were very low and negligible in all drying runs. There was no twisting observed in all drying methods. The number of stress-free RFV board was higher than KD. With proper procedure, the RFV technology could be used for drying heavy hardwoods which are difficult to dry in conventional kilns due to excessive drying times and degradation.

  16. FREEZE DRYING PROCESS: A REVIEW

    OpenAIRE

    Soham Shukla

    2011-01-01

    Among the various methods of drying, this article has mentioned only one most important method, “Freeze drying”. This method is mainly used for the drying of thermo labile materials. This method works on the principle of sublimation. This method is divided into 3 steps for its better understanding; these are Freezing, Primary drying, and secondary drying. There are many advantages and disadvantages of this method, but still this is the most useful drying method nowadays.

  17. Dry piston coal feeder

    Science.gov (United States)

    Hathaway, Thomas J.; Bell, Jr., Harold S.

    1979-01-01

    This invention provides a solids feeder for feeding dry coal to a pressurized gasifier at elevated temperatures substantially without losing gas from the gasifier by providing a lock having a double-acting piston that feeds the coals into the gasifier, traps the gas from escaping, and expels the trapped gas back into the gasifier.

  18. Dry Macular Degeneration

    Science.gov (United States)

    ... a combination of heredity and environmental factors, including smoking and diet. The condition develops as the eye ages. Dry ... nonsmokers. Ask your doctor for help to stop smoking. Maintain a ... controlling your diet. Choose a diet rich in fruits and vegetables. ...

  19. Essays on Dry Ports

    NARCIS (Netherlands)

    G.G. Chandrakant (Gujar)

    2011-01-01

    textabstractDue to several reasons, currently the global supply chains are getting stretched further away into the hinterlands from the gateway seaports. This single fact enhances the importance of dry ports. It would not be against logic, to state that in coming times, as a result of ever-growing

  20. What Is Dry Eye?

    Medline Plus

    Full Text Available ... bloodshot when I wake up? Jun 26, 2016 Why are my eyes dry after LASIK? Jun 19, 2016 Can I be tested whether I close my eyes when I sleep? Feb 10, 2016 Can light sensitivity from Parkinson’s ...

  1. Infrared Drying Parameter Optimization

    Science.gov (United States)

    Jackson, Matthew R.

    In recent years, much research has been done to explore direct printing methods, such as screen and inkjet printing, as alternatives to the traditional lithographic process. The primary motivation is reduction of the material costs associated with producing common electronic devices. Much of this research has focused on developing inkjet or screen paste formulations that can be printed on a variety of substrates, and which have similar conductivity performance to the materials currently used in the manufacturing of circuit boards and other electronic devices. Very little research has been done to develop a process that would use direct printing methods to manufacture electronic devices in high volumes. This study focuses on developing and optimizing a drying process for conductive copper ink in a high volume manufacturing setting. Using an infrared (IR) dryer, it was determined that conductive copper prints could be dried in seconds or minutes as opposed to tens of minutes or hours that it would take with other drying devices, such as a vacuum oven. In addition, this study also identifies significant parameters that can affect the conductivity of IR dried prints. Using designed experiments and statistical analysis; the dryer parameters were optimized to produce the best conductivity performance for a specific ink formulation and substrate combination. It was determined that for an ethylene glycol, butanol, 1-methoxy 2- propanol ink formulation printed on Kapton, the optimal drying parameters consisted of a dryer height of 4 inches, a temperature setting between 190 - 200°C, and a dry time of 50-65 seconds depending on the printed film thickness as determined by the number of print passes. It is important to note that these parameters are optimized specifically for the ink formulation and substrate used in this study. There is still much research that needs to be done into optimizing the IR dryer for different ink substrate combinations, as well as developing a

  2. Potencial del Agua del suelo

    Directory of Open Access Journals (Sweden)

    Bustamante Heliodoro

    1986-12-01

    Full Text Available La energía potencial del agua presenta diferencias de un punto del suelo a otro; esas diferencias son las que originan el movimiento del agua de acuerdo a la tendencia universal de la materia en el sentido de moverse de donde la energía potencial es mayor a donde dicha energía es menor. En el suelo el agua en consecuencia se mueve hacia donde su energía decrece hasta lograr su estado de equilibrio. Se desprende entonces que la cantidad de energía potencial absoluta contenida en el agua, no es importante por sí misma, sino por su relación con la energía en diferentes lugares dentro del suelo. El concepto Potencial de agua del suelo es un criterio para esta energía.

  3. Spray Drying Processing: granules production and drying kinetics of droplets

    International Nuclear Information System (INIS)

    Mondragon, R.; Julia, J. E.; Barba, A.; Jarque, J. C.

    2013-01-01

    Spray drying is a unit operation very common in many industrial processes. For each particular application, the resulting granulated material must possess determined properties that depend on the conditions in which the spray drying processing has been carried out, and whose dependence must be known in order to optimize the quality of the material obtained. The large number of variables that influence on the processes of matter and energy transfer and on the formation of granular material has required a detailed analysis of the drying process. Over the years there have been many studies on the spray drying processing of all kind of materials and the influence of process variables on the drying kinetics of the granulated material properties obtained. This article lists the most important works published for both the spray drying processing and the drying of individual droplets, as well as studies aimed at modeling the drying kinetics of drops. (Author)

  4. Cassava Sun Drying Performance on Various Surfaces and Drying ...

    African Journals Online (AJOL)

    Traditional processing methods that include ... The traditional sun drying method is very inefficient as the product can take 2-. 3 days to dry. .... using a digital balance (Ohaus Corporation type). The same applied .... preservation and marketing.

  5. Dry alcohol production plant

    Directory of Open Access Journals (Sweden)

    Stanković Mirjana S.

    2003-01-01

    Full Text Available The IGPC Engineering Department designed basic projects for dry alcohol production plant, using technology developed in the IGPC laboratories. Several projects were completed: technological, machine, electrical, automation. On the basis of these projects a production plant with a capacity of 40 m3/y was manufactured, at "Zorka Pharma", Šabac in 1995-1996. The product meets all quality demands, as well as environmental regulations. The dry alcohol production process is fully automatized. There is no waste in the process, neither gaseous, nor liquid. The chosen process provides safe operation according to temperature regime and resistance in the pipes, air purification columns and filters. Working at increased pressure is suitable for evaporation and condensation at increased temperatures. The production process can be controlled manually, which is necessary during start-up, and repairs.

  6. Stabilization of Live Attenuated Influenza Vaccines by Freeze Drying, Spray Drying, and Foam Drying.

    Science.gov (United States)

    Lovalenti, Phillip M; Anderl, Jeff; Yee, Luisa; Nguyen, Van; Ghavami, Behnaz; Ohtake, Satoshi; Saxena, Atul; Voss, Thomas; Truong-Le, Vu

    2016-05-01

    The goal of this research is to develop stable formulations for live attenuated influenza vaccines (LAIV) by employing the drying methods freeze drying, spray drying, and foam drying. Formulated live attenuated Type-A H1N1 and B-strain influenza vaccines with a variety of excipient combinations were dried using one of the three drying methods. Process and storage stability at 4, 25 and 37°C of the LAIV in these formulations was monitored using a TCID50 potency assay. Their immunogenicity was also evaluated in a ferret model. The thermal stability of H1N1 vaccine was significantly enhanced through application of unique formulation combinations and drying processes. Foam dried formulations were as much as an order of magnitude more stable than either spray dried or freeze dried formulations, while exhibiting low process loss and full retention of immunogenicity. Based on long-term stability data, foam dried formulations exhibited a shelf life at 4, 25 and 37°C of >2, 1.5 years and 4.5 months, respectively. Foam dried LAIV Type-B manufactured using the same formulation and process parameters as H1N1 were imparted with a similar level of stability. Foam drying processing methods with appropriate selection of formulation components can produce an order of magnitude improvement in LAIV stability over other drying methods.

  7. Porcelain tiles by the dry route

    Directory of Open Access Journals (Sweden)

    Boschi, A. O.

    2010-10-01

    Full Text Available In Brazil, the second largest tile producer of the world, at present, 70% of the tiles are produced by the dry route. One of the main reasons that lead to this development is the fact that the dry route uses approximately 30% less thermal energy them the traditional wet route. The increasing world concern with the environment and the recognition of the central role played by the water also has pointed towards privileging dry processes. In this context the objective of the present work is to study the feasibility of producing high quality porcelain tiles by the dry route. A brief comparison of the dry and wet route, in standard conditions industrially used today to produce tiles that are not porcelain tiles, shows that there are two major differences: the particle sizes obtained by the wet route are usually considerably finer and the capability of mixing the different minerals, the intimacy of the mixture, is also usually better in the wet route. The present work studied the relative importance of these differences and looked for raw materials and operational conditions that would result in better performance and glazed porcelain tiles of good quality.

    En Brasil, en este momento segundo productor mundial, el 70% de los pavimentos cerámicos se obtiene por vía seca. Una de las razones fundamentales se debe a que esta vía supone un consumo energético inferior, en un 30%, a la via húmeda tradicional. La creciente preocupación mundial sobre los problemas medioambientales y el reconocimiento del papel central que juega el agua en este proceso han favorecido el desarrollo de la vía seca. En este contexto, el objetivo del presente trabajo es estudiar la viabilidad de la producción de pavimentos porcelánicos de alta calidad por vía seca. Una breve comparación entre ambas vías, en las condiciones standard de producción vigentes para producciones que no son de porcelánico, indican que existen dos diferencias substanciales; el tamaño de

  8. Dry mouth during cancer treatment

    Science.gov (United States)

    ... gov/ency/patientinstructions/000032.htm Dry mouth during cancer treatment To use the sharing features on this page, please enable JavaScript. Some cancer treatments and medicines can cause dry mouth. Symptoms you ...

  9. Nitramine Drying & Fine Grinding Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Nitramine Drying and Fine Grinding Facility provides TACOM-ARDEC with a state-of-the-art facility capable of drying and grinding high explosives (e.g., RDX and...

  10. Analysis of Drying Process Quality in Conventional Dry-Kilns

    OpenAIRE

    Sedlar Tomislav; Pervan Stjepan

    2010-01-01

    This paper presents testing results of drying quality in a conventional dry kiln. Testing is based on a new methodology that will show the level of success of the drying process management by analyzing the quality of drying process in a conventional dry kiln, using a scientifi cally improved version of the check list in everyday practical applications. A company that specializes in lamel and classic parquet production was chosen so as to verify the new testing methodology. A total of 56 m3 of...

  11. Fluid flow in drying drops

    NARCIS (Netherlands)

    Gelderblom, Hanneke

    2013-01-01

    When a suspension drop evaporates, it leaves behind a drying stain. Examples of these drying stains encountered in daily life are coffee or tea stains on a table top, mineral rings on glassware that comes out of the dishwasher, or the salt deposits on the streets in winter. Drying stains are also

  12. del alcoholismo

    Directory of Open Access Journals (Sweden)

    Rodrigo Arias Duque

    2005-01-01

    Full Text Available Desde el punto de vista farmacológico, es importante comprender qué es el alcohol y cómo actúa en el organismo. No existe una causa simple, sino una interacción complicada de factores neuroquímicos, fisiológicos, psicológicos y sociales que originan y desarrollan esta grave enfermedad fármaco-dependiente. La acción psicofisiológica y farmacodinámica del alcohol es fundamentalmente depresiva, por la reducción de la transmisión sináptica en el sistema nervioso humano. Es un hecho conocido que el consumo excesivo de alcohol causa una disfunción aguda y crónica del cerebro, produciendo trastornos en el sistema nervioso central, presentando alteraciones en la memoria y en las funciones intelectuales como cálculo, comprensión y aprendizaje. A nivel hepático tiene lugar, en su mayoría, el metabolismo del alcohol, produciéndose un hígado graso alcohólico, aumentando el tamaño, terminando en necrosis e inflamación grave del hígado; esto se llama hepatitis alcohólica, y si se sigue consumiendo alcohol se desarrollará la cirrosis. El alcohol también ha estado relacionado con alteraciones del miocardio; se ha constatado en animales de experimentación sanos que tanto la velocidad de contracción del músculo cardiaco y su máxima tensión disminuyen en presencia del alcohol, como consecuencia, la fuerza de cada contracción y el aumento de presión en el ventrículo izquierdo son menores, perdiendo eficacia el corazón como bomba.

  13. A review of dry ports

    OpenAIRE

    Violeta Roso; Kent Lumsden

    2010-01-01

    The objective of this article is to present the previous research on the dry port concept and to review the world's existing dry ports, that is freight terminals that use the term ‘dry port’ in their name. Therefore, the purpose of this article is to clarify the concept by showing potential discrepancies or agreements between theory and practice. Starting from a literature review on the dry port concept, this article presents a review of existing dry ports in the world. A number of qualitativ...

  14. Drying and decontamination of pistachios with sequential infrared drying, tempering and hot air drying

    Science.gov (United States)

    The pistachio industry is in need of improved drying technology as the current hot air drying has low energy efficiency and drying rate and high labor cost and also does not produce safe products against microbial contamination. In the current study, dehulled and water- sorted pistachios with a mois...

  15. Effect of paddy drying depth using open-sun drying on drying time ...

    African Journals Online (AJOL)

    The smallholder rice farmers in the Uganda dry their paddy using open-sun drying method. In most cases the paddy is badly dried and has very high fissure levels. Such paddy on milling contributes to low levels of mill recovery and whole grain in the milled rice. This study was therefore done to find a recommendable ...

  16. Culturas del Mundo

    DEFF Research Database (Denmark)

    Benwell, Ann Fenger; Costa, Alberto; Waehle, Espen

    2006-01-01

    ’Culturas del mundo. Colecciones del Museo Nacional de Dinamarca’ with Ann Fenger Benwell in Culturas del Mundo. Colecciones del Museo Nacional de Dinamarca, ed. Silvia Sauquet, Fundación "la Caixa", Barcelona 2006, pp. 31-39......’Culturas del mundo. Colecciones del Museo Nacional de Dinamarca’ with Ann Fenger Benwell in Culturas del Mundo. Colecciones del Museo Nacional de Dinamarca, ed. Silvia Sauquet, Fundación "la Caixa", Barcelona 2006, pp. 31-39...

  17. Design of solar drying-plant for bulk material drying

    Directory of Open Access Journals (Sweden)

    Peter Horbaj

    2008-11-01

    Full Text Available A generally well-known high energy requirement for technological processes of drying and the fact that the world’s supplyof the conventional energy sources has considerably decreased are the decisive factors forcing us to look for some new, if possible,renewable energy sources for this process by emphasising their environmental reliability. One of the possibilities how to replace, atleast partly, the conventional energy sources – heat in a drying process is solar energy.Air-drying of bulk materials usually has a series of disadvantages such as time expenditure, drying defects in the bulk materialand inadequate final moisture content. A method that obviates or reduces the disadvantages of air-drying and, at the same time, reducesthe costs of kiln drying, is drying with solar heat. Solar energy can replace a large part of this depletable energy since solar energy cansupply heat at the temperatures most often used to dry bulk material. Solar drying-plant offer an attractive solution.

  18. Diversidad de avispas parasitoides de la familia Encyrtidae (Hymenoptera: Chalcidoidea del bosque tropical caducifolio en San Buenaventura, Jalisco, México Diversity of parasitoid wasps of the family Encyrtidae (Hymenoptera: Chalcidoidea in the tropical dry forest of San Buenaventura, Jalisco, Mexico

    Directory of Open Access Journals (Sweden)

    Beatriz Rodríguez-Velez

    2011-09-01

    Full Text Available Se presentan los resultados del estudio de la fauna de avispas parasitoides de la familia Encyrtidae en el bosque tropical caducifolio de San Buenaventura, Jalisco, México. El estudio se llevó a cabo de noviembre de 1996 a octubre de 1997. La recolección se realizó con trampas Malaise durante 5 días de cada mes. Se registró un total de 61 especies, 30 géneros, 13 tribus y 2 subfamilias. El mayor número de géneros y especies fue de la subfamilia Encyrtinae, con 22 géneros y 44 especies, seguida por Tetracneminae con 8 géneros y 17 especies. El género con mayor número de especies fue Metaphycus con 11. Las especies recolectadas no fueron abundantes, y su riqueza y abundancia varió estacionalmente, registrándose los valores más altos durante la temporada de lluvias. La similitud de la fauna de San Buenaventura, Jalisco con la de Huautla, Morelos fue mayor que la encontrada en otras regiones previamente estudiadas de bosque tropical caducifolio (San Javier, Sonora y Huatulco, Oaxaca.Results of a faunistic study of the parasitoid wasps of the family Encyrtidae of the tropical dry forest of San Buenaventura, Jalisco, Mexico are presented. The study was carried out from November 1996 to October 1997. Collecting technique was Malaise trapping. Collections were carried out during 5 days of every month. A total of 61 species, 30 genera, 13 tribes and 2 subfamilies were recorded. The subfamily with the largest number of species was Encyrtinae with 22 genera and 44 species, followed by Tetracneminae with 8 genera and 17 species. The genus with the largest number of species was Metaphycus with 11. Species had low abundance. Species richness and abundance varied with time, with the highest values recorded in the rainy season. The fauna of San Buenaventura, Jalisco was most similar to that of Huautla, Morelos, than to that of San Javier, Sonora and Huatulco, Oaxaca, all of them previously studied.

  19. Comparison of drying characteristic and uniformity of banana cubes dried by pulse-spouted microwave vacuum drying, freeze drying and microwave freeze drying.

    Science.gov (United States)

    Jiang, Hao; Zhang, Min; Mujumdar, Arun S; Lim, Rui-Xin

    2014-07-01

    To overcome the flaws of high energy consumption of freeze drying (FD) and the non-uniform drying of microwave freeze drying (MFD), pulse-spouted microwave vacuum drying (PSMVD) was developed. The results showed that the drying time can be dramatically shortened if microwave was used as the heating source. In this experiment, both MFD and PSMVD could shorten drying time by 50% as compared to the FD process. Depending on the heating method, MFD and PSMVD dried banana cubes showed trends of expansion while FD dried samples demonstrated trends of shrinkage. Shrinkage also brought intensive structure and highest fracturability of all three samples dried by different methods. The residual ascorbic acid content of PSMVD dried samples can be as high as in FD dried samples, which were superior to MFD dried samples. The tests confirmed that PSMVD could bring about better drying uniformity than MFD. Besides, compared with traditional MFD, PSMVD can provide better extrinsic feature, and can bring about improved nutritional features because of the higher residual ascorbic acid content. © 2013 Society of Chemical Industry.

  20. Neuropathic pain and dry eye.

    Science.gov (United States)

    Galor, Anat; Moein, Hamid-Reza; Lee, Charity; Rodriguez, Adriana; Felix, Elizabeth R; Sarantopoulos, Konstantinos D; Levitt, Roy C

    2018-01-01

    Dry eye is a common, multifactorial disease currently diagnosed by a combination of symptoms and signs. Its epidemiology and clinical presentation have many similarities with neuropathic pain outside the eye. This review highlights the similarities between dry eye and neuropathic pain, focusing on clinical features, somatosensory function, and underlying pathophysiology. Implications of these similarities on the diagnosis and treatment of dry eye are discussed. Published by Elsevier Inc.

  1. Post-LASIK dry eye

    Science.gov (United States)

    Shtein, Roni M

    2011-01-01

    Laser-assisted in situ keratomileusis (LASIK) is a frequently performed corneal refractive surgery with excellent refractive outcomes. The most common complication of LASIK is dry eyes, with virtually all patients developing some degree of dryness in the immediate postoperative period. Identifying preoperative dry eyes, and conscientious attention and treatment in the perioperative time period, can lead to enhanced patient satisfaction and more accurate visual outcomes. Improved understanding of the development of dry eyes after LASIK will advance our understanding of the complex pathophysiology of dry eye disease. PMID:22174730

  2. Quality of dry chemistry testing.

    Science.gov (United States)

    Nakamura, H; Tatsumi, N

    1999-01-01

    Since the development of the qualitative test paper for urine in 1950s, several kinds of dry-state-reagents and their automated analyzers have been developed. "Dry chemistry" has become to be called since the report on the development of quantitative test paper for serum bilirubin with reflectometer in the end of 1960s and dry chemistry has been world widely known since the presentation on the development of multilayer film reagent for serum biochemical analytes by Eastman Kodak Co at the 10th IFCC Meeting in the end of 1970s. We have reported test menu, results in external quality assessment, merits and demerits, and the future possibilities of dry chemistry.

  3. a comparative study of the drying rate constant, drying efficiency

    African Journals Online (AJOL)

    The drying rate constants for the solar dryer and open- air sun dried bitter leaf were 0.8 and ... of cost benefit but the poorest when other considerations ... J. I. Eze, National Centre for Energy Research and Development (NCERD), University of ...

  4. Drying Spirulina with Foam Mat Drying at Medium Temperature

    Directory of Open Access Journals (Sweden)

    Aji Prasetyaningrum

    2012-10-01

    Full Text Available Spirulina is a single cell blue green microalgae (Cyanobacteria containing many Phytonutrients (Beta-carotene, Chlorophyl, Xanthophyl, Phyocianin using as anti-carcinogen in food. Producing dry spirulina by quick drying process at medium temperature is very important to retain the Phytonutrient quality. Currently, the work is still challenging due to the gel formation that block the water diffusion from inside to the surface.  This research studies the performance of foam-mat drying on production of dry spirulina. In this method the spirulina was mixed with foaming agent (glair/egg albumen, popular as white egg at 2.5% by weight at air velocity 2.2 m/sec. Here, the effect of spirulina thickness and operational temperature on drying time and quality (Beta-carotene and color were observed. The drying time was estimated based on the measurement of water content in spirulina versus time. Result showed that the thicker spirulina, the longer drying time. Conversely, the higher operational temperature, faster drying time. At thickness ranging 1-3 mm and operational temperature below 70oC, the quality of spirulina can fit the market requirement

  5. Carrageenan drying with dehumidified air: drying characteristics and product quality

    NARCIS (Netherlands)

    Djaeni, M.; Sasongko, S.B.; Prasetyaningrum, Aji A A.A.; Jin, X.; Boxtel, van A.J.B.

    2012-01-01

    Applying dehumidified air is considered as an option to retain quality in carrageenan drying. This work concerns the effects of operational temperature, air velocity, and carrageenan thickness on the progress of drying and product quality when using dehumidified air. Final product quality and

  6. The antisickling effects of dried fish (tilapia) And dried prawn ...

    African Journals Online (AJOL)

    The antisickling effect of dried fish (Tilapia) and dried prawn (Astacus red) were investigated to ascertain the ability of the extracts of these samples to inhibit polymerisation of sickle cell haemoglobin (HbS), improve the Fe 2+/Fe 3+ ratio and lower the activity of lactate dehydrogenase (LDH) in blood plasma. The samples ...

  7. Generalized drying curves in conductive/convective paper drying

    Directory of Open Access Journals (Sweden)

    O.C. Motta Lima

    2000-12-01

    Full Text Available This work presents a study related to conductive/convective drying of paper (cellulose sheets over heated surfaces, under natural and forced air conditions. The experimental apparatus consists in a metallic box heated by a thermostatic bath containing an upper surface on which the paper samples (about 1 mm thick are placed. The system is submitted to ambient air under two different conditions: natural convection and forced convection provide by an adjustable blower. The influence of initial paper moisture content, drying (heated surface temperature and air velocity on drying curves behavior is observed under different drying conditions. Hence, these influence is studied through the proposal of generalized drying curves. Those curves are analyzed individually for each air condition exposed above and for both together. A set of equations to fit them is proposed and discussed.

  8. Market opportunities for solar drying

    International Nuclear Information System (INIS)

    Voskens, R.G.J.H.; Out, P.G.; Schulte, B.

    2000-01-01

    One of the most promising applications for solar heating is the drying of agricultural products. The drying of agricultural products requires large quantities of low temperature air, in many cases, on a year-round basis. Low cost air-based collectors can provide heated air at solar collection efficiencies of 30 to 70%. In 1998/1999 a study was commissioned to better understand the technical and economic potential for solar drying of agricultural products in the world. The practical potential for solar drying was then determined for 59 crops and 22 regions. The world market for solar drying can be divided into three market segments: 1) mechanical drying T 50 deg. C; 3) sun drying. The most promising market for solar drying is generally market segment 1. For this segment the potential amount of energy displaced by solar is in between 216 770 PJ (World-wide). For Western Europe this potential is estimated between 23 88 PJ and for Eastern Europe between 7 and 13 PJ. A different market introduction strategy is required for each market segment. A total of 13 combinations of crops and regions are selected that appear to have the highest practical potential for solar drying. In the Netherlands a programme of activities was carried out by Ecofys and other organisations, to identify and develop the market potential for solar (assisted) drying of agricultural products. A promotional campaign for the use of renewable energy in the (promising) flower bulb sector is planned on a short-term basis to speed up market developments. It can be concluded that there is a large market for solar drying in the World as well as in Europe. (au)

  9. Dry wall Kras 2011

    Directory of Open Access Journals (Sweden)

    Domen Zupančič

    2012-01-01

    Full Text Available Despite the modesty of hiska, they show a simple understanding of corbelling technique. One could say they are all examples of human landscape cultivation. Although there is no evident common line when comparing all types of hiska, the cunning eye may observe one shared feature: the positioning of the entrance. More or less all the documented shelters have south or south-western facing entrances. The burja is a cold northerly wind; from the south (Adriatic Sea the winds are warmer. When resting, the setting sun is taken as a sign of the ending of the working day and a reward for the whole day’s efforts. Entrances are the only openings to these structures, and they should serve as well as possible - to watch over the crops, to wait when hunting, to enjoy the calm of evening light, to breathe the sea wind.The syntax of the architectural language of layering stone and shaping the pattern of the landscape remain an inventive realisation of spatial ideas from the past until today. Not only ideas of shaping space - these ideas are basic interventions in the natural habitat which contribute to survival. Culture and an awareness of its values are the origins of local development and reasonable heritage preservation. The next step are tutorial days with workshops on how to build dry stone structures, walls and other stone architecture, as the DSWA organisation in the UK is doing.

  10. Forward Osmosis Brine Drying

    Science.gov (United States)

    Flynn, Michael; Shaw, Hali; Hyde, Deirdre; Beeler, David; Parodi, Jurek

    2015-01-01

    The Forward Osmosis Brine Drying (FOBD) system is based on a technique called forward osmosis (FO). FO is a membrane-based process where the osmotic potential between brine and a salt solution is equalized by the movement of water from the brine to the salt solution. The FOBD system is composed of two main elements, the FO bag and the salt regeneration system. This paper discusses the results of testing of the FO bag to determine the maximum water recovery ratio that can be attained using this technology. Testing demonstrated that the FO bag is capable of achieving a maximum brine water recovery ratio of the brine of 95%. The equivalent system mass was calculated to be 95 kg for a feed similar to the concentrated brine generated on the International Space Station and 86 kg for an Exploration brine. The results have indicated that the FOBD can process all the brine for a one year mission for between 11% to 10% mass required to bring the water needed to make up for water lost in the brine if not recycled. The FOBD saves 685 kg and when treating the International Space Station brine and it saves 829 kg when treating the Exploration brine. It was also demonstrated that saturated salt solutions achieve a higher water recovery ratios than solids salts do and that lithium chloride achieved a higher water recovery ratio than sodium chloride.

  11. Wet Mars, Dry Mars

    Science.gov (United States)

    Fillingim, M. O.; Brain, D. A.; Peticolas, L. M.; Yan, D.; Fricke, K. W.; Thrall, L.

    2012-12-01

    The magnetic fields of the large terrestrial planets, Venus, Earth, and Mars, are all vastly different from each other. These differences can tell us a lot about the interior structure, interior history, and even give us clues to the atmospheric history of these planets. This poster highlights the third in a series of presentations that target school-age audiences with the overall goal of helping the audience visualize planetary magnetic field and understand how they can impact the climatic evolution of a planet. Our first presentation, "Goldilocks and the Three Planets," targeted to elementary school age audiences, focuses on the differences in the atmospheres of Venus, Earth, and Mars and the causes of the differences. The second presentation, "Lost on Mars (and Venus)," geared toward a middle school age audience, highlights the differences in the magnetic fields of these planets and what we can learn from these differences. Finally, in the third presentation, "Wet Mars, Dry Mars," targeted to high school age audiences and the focus of this poster, the emphasis is on the long term climatic affects of the presence or absence of a magnetic field using the contrasts between Earth and Mars. These presentations are given using visually engaging spherical displays in conjunction with hands-on activities and scientifically accurate 3D models of planetary magnetic fields. We will summarize the content of our presentations, discuss our lessons learned from evaluations, and show (pictures of) our hands-on activities and 3D models.

  12. Energy cost of seed drying

    Directory of Open Access Journals (Sweden)

    Weerachet Jittanit

    2017-11-01

    Full Text Available In this work, the energy costs of drying corn, rice and wheat seeds between 3 drying options were compared. They consisted of 1 two-stage drying by using fluidised bed dryer (FBD in the 1st stage and in-store dryer (ISD in the 2nd stage, 2 single-stage drying by fixed bed dryer (FXD and 3 two-stage drying by using FXD in the 1st  stage and ISD in the 2nd  stage. The drying conditions selected for comparison were proved to be safe for seed viability by the previous studies. The results showed that the drying options 2 and 3 consumed less energy than option 1. However, the benefits from lower energy cost must be weighed against some advantages of using FBD. Furthermore, it appeared that running the burners of FXD and ISD for warming up the ambient air during humid weather condition could shorten drying time significantly with a little higher energy cost.

  13. Dry eyes: etiology and management.

    Science.gov (United States)

    Latkany, Robert

    2008-07-01

    Until recently, the cause of dry eye syndrome was uncertain and the treatment was palliative. Since discovering that dry eyes are caused by inflammation, there has been an abundance of research focusing on anti-inflammatory therapies, other contributing causes, and better diagnostic testing. This review summarizes some of the interesting published research on ocular surface disease over the past year. The definition of dry eye now highlights the omnipresent symptom of blurry vision. The re-evaluation of ocular surface staining, tear meniscus height, and visual change will allow for a better diagnosis and understanding of dry eyes. Punctal plugs, and oral and topical anti-inflammatory use will strengthen our arsenal against ocular surface disease. Major progress has occurred in the past few years in gaining a better understanding of the etiology of dry eye syndrome, which will inevitably lead to more effective therapeutic options.

  14. Drying kinetics of atemoya pulp

    Directory of Open Access Journals (Sweden)

    Plúvia O. Galdino

    Full Text Available ABSTRACT This study was conducted in order to obtain drying curves of whole atemoya pulp through the foam-mat drying method. The suspension was prepared with whole atemoya pulp mixed with 2% of Emustab® and 2% of Super Liga Neutra® with mixing time of 20 min, and dried in a forced-air oven at different temperatures (60; 70 and 80 °C and thicknesses of the foam layer (0.5, 1.0 and 1.5 cm. The drying rate curves were plotted against the water content ratio and the semi-theoretical models of Henderson & Pabis, Page and Midilli were used. All tested models showed coefficient of determination (R2 above 0.993, and the Midilli model showed the best fit for all conditions. Drying curves were affected by temperature and layer thickness.

  15. Space and Industrial Brine Drying Technologies

    Science.gov (United States)

    Jones, Harry W.; Wisniewski, Richard S.; Flynn, Michael; Shaw, Hali

    2014-01-01

    This survey describes brine drying technologies that have been developed for use in space and industry. NASA has long considered developing a brine drying system for the International Space Station (ISS). Possible processes include conduction drying in many forms, spray drying, distillation, freezing and freeze drying, membrane filtration, and electrical processes. Commercial processes use similar technologies. Some proposed space systems combine several approaches. The current most promising candidates for use on the ISS use either conduction drying with membrane filtration or spray drying.

  16. Drying of α-amylase by spray drying and freeze-drying - a comparative study

    Directory of Open Access Journals (Sweden)

    S. S. de Jesus

    2014-09-01

    Full Text Available This study is aimed at comparing two traditional methods of drying of enzymes and at verifying the efficiency of each one and their advantages and disadvantages. The experiments were performed with a laboratory spray dryer and freeze-dryer using α-amylase as the model enzyme. An experimental design in star revealed that spray drying is mainly influenced by the inlet air temperature and feed flow rate, which were considered to be the main factors influencing the enzymatic activity and water activity; the long period of material exposure to high temperatures causes a partial activity loss. In the experiments of freeze drying, three methods of freezing were used (freezer, acetone and dry ice, and liquid nitrogen and samples subsequently freeze-dried for times ranging between 0-24 hours. The product obtained from the two techniques showed high enzymatic activity and low water activity. For the drying of heat-resistant enzymes, in which the product to be obtained does not have high added value, spray drying may be more economically viable because, in the freeze drying process, the process time can be considered as a limiting factor when choosing a technique.

  17. No Heat Spray Drying Technology

    Energy Technology Data Exchange (ETDEWEB)

    Beetz, Charles [ZoomEssence, Inc., Hebron, KY (United States)

    2016-06-15

    No Heat Spray Drying Technology. ZoomEssence has developed our Zooming™ spray drying technology that atomizes liquids to powders at ambient temperature. The process of drying a liquid into a powder form has been traditionally achieved by mixing a heated gas with an atomized (sprayed) fluid within a vessel (drying chamber) causing the solvent to evaporate. The predominant spray drying process in use today employs air heated up to 400° Fahrenheit to dry an atomized liquid into a powder. Exposing sensitive, volatile liquid ingredients to high temperature causes molecular degradation that negatively impacts solubility, stability and profile of the powder. In short, heat is detrimental to many liquid ingredients. The completed award focused on several areas in order to advance the prototype dryer to a commercial scale integrated pilot system. Prior to the award, ZoomEssence had developed a prototype ‘no-heat’ dryer that firmly established the feasibility of the Zooming™ process. The award focused on three primary areas to improve the technology: (1) improved ability to formulate emulsions for specific flavor groups and improved understanding of the relationship of emulsion properties to final dry particle properties, (2) a new production atomizer, and (3) a dryer controls system.

  18. Dry Mouth Treatment: Tips for Controlling Dry Mouth

    Science.gov (United States)

    ... mouthwashes that contain alcohol because they can be drying. Stop all tobacco use if you smoke or ... also help your condition: Avoid sugary or acidic foods and drinks because they increase your risk of ...

  19. Is dry cleaning all wet?

    International Nuclear Information System (INIS)

    Ryan, M.

    1993-01-01

    Chemical solvents from dry cleaning, particularly perchloroethylene (perc), have contributed to groundwater contamination, significant levels of air pollution in and around cleaners, and chemical accumulation in food. Questions are being raised about the process of cleaning clothes with chemical, and other less toxic cleaning methods are being explored. The EPA has focused attention on the 50 year old Friedburg method of cleaning, Ecoclean, which uses no dangerous chemicals and achieves comparable results. Unfortunately, the cleaning industry is resistant to change, so cutting back on amount of clothes that need dry cleaning and making sure labels aren't exaggerating when they say dry clean only, is frequently the only consumer option now

  20. Il dono del racconto

    DEFF Research Database (Denmark)

    Polito, Paola

    1998-01-01

    L'articolo indaga a vari livelli strutturali del romanzo "Il coraggio del pettirosso" (rete metaforica, dialogismo diegetico, dialogismo come fenomeno di voce, strategie discorsive messe in atto dalla voce narrante, stile colloquiale) la complessa realizzazione testuale del genere narrativo...

  1. Spent fuel drying system test results (second dry-run)

    International Nuclear Information System (INIS)

    Klinger, G.S.; Oliver, B.M.; Abrefah, J.; Marschman, S.C.; MacFarlan, P.J.; Ritter, G.A.

    1998-07-01

    The water-filled K-Basins in the Hanford 100 Area have been used to store N-Reactor spent nuclear fuel (SNF) since the 1970s. Because some leaks have been detected in the basins and some of the fuel is breached due to handling damage and corrosion, efforts are underway to remove the fuel elements from wet storage. An Integrated Process Strategy (IPS) has been developed to package, dry, transport, and store these metallic uranium fuel elements in an interim storage facility on the Hanford Site (WHC 1995). Information required to support the development of the drying processes, and the required safety analyses, is being obtained from characterization tests conducted on fuel elements removed from the K-Basins. A series of whole element drying tests (reported in separate documents, see Section 7.0) have been conducted by Pacific Northwest National Laboratory (PNNL) on several intact and damaged fuel elements recovered from both the K-East and K-West Basins. This report documents the results of the second dry-run test, which was conducted without a fuel element. With the concurrence of project management, the test protocol for this run, and subsequent drying test runs, was modified. These modifications were made to allow for improved data correlation with drying procedures proposed under the IPS. Details of these modifications are discussed in Section 3.0

  2. Efecto del proceso de secado de la lombriz de tierra (Eisenia andrei sobre el perfil aminoacídico de la harina determinado por cromatografía (CLAE | Effect of drying process of the earthworm (Eisenia andrei on amino acidic profile of the meal determined by chromatography (HPLC

    Directory of Open Access Journals (Sweden)

    José Ovalles

    2017-11-01

    Full Text Available The possible effect of the drying temperature of the earthworm, Eisenia andrei, biomass on the amino acid profile of the resulting flour was evaluated. A tray dryer with air recirculation was used as a drying technique. The tested drying temperature were relatively low, T1 = 30, T2 = 40, T3 = 45 (°C, until obtaining a relative humidity below 10%. The differences in protein content of meal among treatments were not significant and resulted in average 63 ± 2% on a dry basis, and practically did not affect the proximate analysis in terms of total fat (7.2 ± 0.7% and ash content (5.3 ± 0.6%. Differences in the amino acid profile of the earthworm meal were not significant (p = 0.05 among treatments, except for asparagine (as Asp and glutamine (as Glu. Although, under the experimental conditions of the proposed approach, the results in terms of nutritional values were expected and satisfactory, they were not convenient in terms of microbiological quality. The results allow to infer that the use of low temperature drying is not a recommended approach to obtain earthworm meal, unless experimental conditions also ensure the microbiological quality without compromising the cost-benefit of the proposed drying process.

  3. Air dehumidification and drying processes

    Energy Technology Data Exchange (ETDEWEB)

    Steiner, R.

    1988-07-01

    Details are given on the physical principles of air dehumidification and drying as well as on appropriate systems available on the market. Reference is made to dehumidification through condensation (intermittent compressor or electric auxiliary heater defrosting, reversible-circuit hot gas bypass defrosting), air drying through sorption (sorbents, regeneration through heat inputs), the operation of absorptive dryers (schematic sketches), and the change of state of air (Mollier h,x-diagramm). Practical examples refer to the dehumidification of storage rooms, archives, and waterworks as well as to air drying in the pharmaceutical industry, the pastry and candy industry, the food industry, and the drying (preservation) of turbines and generators during long standstill periods. A diagramm shows that while adsorption processes are efficient at temperatures below 80/sup 0/C, low-temperature dehumidification is efficient at temperatures above. (HWJ).

  4. Simple Solutions for Dry Eye

    Science.gov (United States)

    Patient Education Sheet Simple Solutions for Dry Eye The SSF thanks J. Daniel Nelson, MD, Associate Medical Director, Specialty Care HealthPartners Medical Group & Clinics, and Professor of Ophthalmology, University of ...

  5. Sustaining dry surfaces under water

    DEFF Research Database (Denmark)

    Jones, Paul R.; Hao, Xiuqing; Cruz-Chu, Eduardo R.

    2015-01-01

    Rough surfaces immersed under water remain practically dry if the liquid-solid contact is on roughness peaks, while the roughness valleys are filled with gas. Mechanisms that prevent water from invading the valleys are well studied. However, to remain practically dry under water, additional...... mechanisms need consideration. This is because trapped gas (e.g. air) in the roughness valleys can dissolve into the water pool, leading to invasion. Additionally, water vapor can also occupy the roughness valleys of immersed surfaces. If water vapor condenses, that too leads to invasion. These effects have...... not been investigated, and are critically important to maintain surfaces dry under water.In this work, we identify the critical roughness scale, below which it is possible to sustain the vapor phase of water and/or trapped gases in roughness valleys – thus keeping the immersed surface dry. Theoretical...

  6. Dry skin - self-care

    Science.gov (United States)

    ... pat skin dry then apply your moisturizer. Avoid skin care products and soaps that contain alcohol, fragrances, dyes, or other chemicals. Take short, warm baths or showers. Limit your ... gentle skin cleansers or soap with added moisturizers. Only use ...

  7. Emulsion type dry cleaning system

    International Nuclear Information System (INIS)

    Kohanawa, Osamu; Matsumoto, Hiroyo.

    1988-01-01

    Protective clothing against radioactive contamination used in the radiation controlled areas of nuclear plants has been washed by the same wet washing as used for underwear washing, but recently dry cleaning is getting used in place of wet washing, which generates a large quantity of laundry drain. However, it was required to use wet washing once every five to ten dry cleanings for washing protective clothing, because conventional dry cleaning is less effective in removing water-soluble soils. Therefore, in order to eliminate wet washing, and to decrease the quantity of laundry drains, the emulsion type dry cleaning system capable of removing both oil-soluble and water-soluble soils at a time has been developed. The results of developmental experiments and actual application are presented in this paper. (author)

  8. Anthology of dry storage solutions

    Energy Technology Data Exchange (ETDEWEB)

    Allimann, Nathalie; Otton, Camille [AREVA, Paris (France)

    2012-03-15

    Around 35,000 PWR, BWR or Veer used fuel elements with various enrichment value up to 5%, various cooling time down to 2 years and various burn-ups up to 60,000 Mwd/tU are currently stored in AREVA dry storage solutions. These solutions are delivered in the United States, in Japan and in many European countries like Belgium, Switzerland, Italy, Armenia and Germany. With more than 1000 dry storage solutions delivered all over the world AREVA is the leader on this market. Dealing with dry storage is not an easy task. Products have to be flexible, to be adapted to customer needs and to the national regulations which may stipulate very strict tests such as airplane crash or simulation of earthquake. To develop a dry storage solution for a foreign country means to deal with its national competent authorities. All the national competent authorities do not have the same requirements. Storage conditions may also be different.

  9. Anthology of dry storage solutions

    International Nuclear Information System (INIS)

    Allimann, Nathalie; Otton, Camille

    2012-01-01

    Around 35,000 PWR, BWR or Veer used fuel elements with various enrichment value up to 5%, various cooling time down to 2 years and various burn-ups up to 60,000 Mwd/tU are currently stored in AREVA dry storage solutions. These solutions are delivered in the United States, in Japan and in many European countries like Belgium, Switzerland, Italy, Armenia and Germany. With more than 1000 dry storage solutions delivered all over the world AREVA is the leader on this market. Dealing with dry storage is not an easy task. Products have to be flexible, to be adapted to customer needs and to the national regulations which may stipulate very strict tests such as airplane crash or simulation of earthquake. To develop a dry storage solution for a foreign country means to deal with its national competent authorities. All the national competent authorities do not have the same requirements. Storage conditions may also be different

  10. Post-LASIK dry eye

    OpenAIRE

    Shtein, Roni M

    2011-01-01

    Laser-assisted in situ keratomileusis (LASIK) is a frequently performed corneal refractive surgery with excellent refractive outcomes. The most common complication of LASIK is dry eyes, with virtually all patients developing some degree of dryness in the immediate postoperative period. Identifying preoperative dry eyes, and conscientious attention and treatment in the perioperative time period, can lead to enhanced patient satisfaction and more accurate visual outcomes. Improved understanding...

  11. Dry and coating of powders

    International Nuclear Information System (INIS)

    Alonso, M.; Alguacil, F. J.

    1999-01-01

    This paper presents a review on the mixing and coating of powders by dry processes. The reviews surveys fundamental works on mixture characterization (mixing index definitions and sampling techniques), mixing mechanisms and models, segregation with especial emphasis on free-surface segregation, mixing of cohesive powders and interparticle forces, ordered mixing (dry coating) including mechanism, model and applications and mixing equipment selection. (Author) 180 refs

  12. Photovoltaic assisted solar drying system

    International Nuclear Information System (INIS)

    Ruslan, M.H.; Othman, M.Y.; Baharuddin Yatim; Kamaruzzaman Sopian; Ali, M.I.; Ibarahim, Z.

    2006-01-01

    A photovoltaic assisted solar drying system has been constructed at the Solar Energy Research Park, Universiti Kebangsaan Malaysia. This drying system uses a custom designed parallel flow V-groove type collector. A fan powered by photovoltaic source assists the air flow through the drying system. A funnel with increasing diameter towards the top with ventilator turbine is incorporated into the system to facilitate the air flow during the absence of photovoltaic energy source. This drying system is designed with high efficiency and portability in mind so that it can readily be used at plantation sites where the crops are harvested or produced. A daily mean efficiency about 44% with mean air flow rate 0.16 kgs -1 has been achieved at mean daily radiation intensity of 800 Wm -2 . daily mean temperature of air drying chamber under the above conditions is 46 o C. Study has shown that the air flow and air temperature increase with the increase of solar radiation intensity. On a bright sunny day with instantaneous solar intensity about 600 Wm -2 , the temperature of air entering the drying chamber of 45 o C has been measured. In the absence of photovoltaic or in natural convection flow, the instantaneous efficiency decreased when solar radiation increased. The instantaneous efficiency recorded are 35% and 27% respectively at 570 Wm -2 and 745 Wm -2 of solar radiation. The temperature of drying chamber for the same amount of solar radiation are 42 o C and 48 o C respectively. Thus, the solar dryer shows a great potential for application in drying process of agricultural produce

  13. Dry Orgasm (Orgasm without Discharge of Semen)

    Science.gov (United States)

    Symptoms Dry orgasm By Mayo Clinic Staff Dry orgasm occurs when a man reaches sexual climax but doesn't release (ejaculate) ... the thick, white fluid that carries sperm. Dry orgasm usually isn't harmful, but it can interfere ...

  14. Dry Eyes and Glaucoma: Double Trouble

    Science.gov (United States)

    ... Involved News About Us Donate In This Section Dry Eyes and Glaucoma: Double Trouble email Send this article ... eye disease bothers the patient more. What Causes Dry Eye Syndrome? Dry eye can be caused by many ...

  15. Dry mouth and older people.

    Science.gov (United States)

    Thomson, W M

    2015-03-01

    Dry mouth is more common among older people than in any other age group. Appropriate definition and accurate measurement of dry mouth is critical for better understanding, monitoring and treatment of the condition. Xerostomia is the symptom(s) of dry mouth; it can be measured using methods ranging from single questions to multi-item summated rating scales. Low salivary flow (known as salivary gland hypofunction, or SGH) must be determined by measuring that flow. The relationship between SGH and xerostomia is not straightforward, but both conditions are common among older people, and they affect sufferers' day-to-day lives in important ways. The major risk factor for dry mouth is the taking of particular medications, and older people take more of those than any other age group, not only for symptomatic relief of various age-associated chronic diseases, but also in order to reduce the likelihood of complications which may arise from those conditions. The greater the number taken, the greater the associated anticholinergic burden, and the more likely it is that the individual will suffer from dry mouth. Since treating dry mouth is such a challenge for clinicians, there is a need for dentists, doctors and pharmacists to work together to prevent it occurring. © 2015 Australian Dental Association.

  16. Dry adhesives with sensing features

    International Nuclear Information System (INIS)

    Krahn, J; Menon, C

    2013-01-01

    Geckos are capable of detecting detachment of their feet. Inspired by this basic observation, a novel functional dry adhesive is proposed, which can be used to measure the instantaneous forces and torques acting on an adhesive pad. Such a novel sensing dry adhesive could potentially be used by climbing robots to quickly realize and respond appropriately to catastrophic detachment conditions. The proposed torque and force sensing dry adhesive was fabricated by mixing Carbon Black (CB) and Polydimethylsiloxane (PDMS) to form a functionalized adhesive with mushroom caps. The addition of CB to PDMS resulted in conductive PDMS which, when under compression, tension or torque, resulted in a change in the resistance across the adhesive patch terminals. The proposed design of the functionalized dry adhesive enables distinguishing an applied torque from a compressive force in a single adhesive pad. A model based on beam theory was used to predict the change in resistance across the terminals as either a torque or compressive force was applied to the adhesive patch. Under a compressive force, the sensing dry adhesive was capable of measuring compression stresses from 0.11 Pa to 20.9 kPa. The torque measured by the adhesive patch ranged from 2.6 to 10 mN m, at which point the dry adhesives became detached. The adhesive strength was 1.75 kPa under an applied preload of 1.65 kPa for an adhesive patch with an adhesive contact area of 7.07 cm 2 . (paper)

  17. Dry adhesives with sensing features

    Science.gov (United States)

    Krahn, J.; Menon, C.

    2013-08-01

    Geckos are capable of detecting detachment of their feet. Inspired by this basic observation, a novel functional dry adhesive is proposed, which can be used to measure the instantaneous forces and torques acting on an adhesive pad. Such a novel sensing dry adhesive could potentially be used by climbing robots to quickly realize and respond appropriately to catastrophic detachment conditions. The proposed torque and force sensing dry adhesive was fabricated by mixing Carbon Black (CB) and Polydimethylsiloxane (PDMS) to form a functionalized adhesive with mushroom caps. The addition of CB to PDMS resulted in conductive PDMS which, when under compression, tension or torque, resulted in a change in the resistance across the adhesive patch terminals. The proposed design of the functionalized dry adhesive enables distinguishing an applied torque from a compressive force in a single adhesive pad. A model based on beam theory was used to predict the change in resistance across the terminals as either a torque or compressive force was applied to the adhesive patch. Under a compressive force, the sensing dry adhesive was capable of measuring compression stresses from 0.11 Pa to 20.9 kPa. The torque measured by the adhesive patch ranged from 2.6 to 10 mN m, at which point the dry adhesives became detached. The adhesive strength was 1.75 kPa under an applied preload of 1.65 kPa for an adhesive patch with an adhesive contact area of 7.07 cm2.

  18. Dry dock gate stability modelling

    Science.gov (United States)

    Oktoberty; Widiyanto; Sasono, E. J.; Pramono, S.; Wandono, A. T.

    2018-03-01

    The development of marine transportation needs in Indonesia increasingly opens national shipyard business opportunities to provide shipbuilding services to the shipbuilding vessels. That emphasizes the stability of prime. The ship's decking door becomes an integral part of the efficient place and the specification of the use of the asset of its operational ease. This study aims to test the stability of Dry Dock gate with the length of 35.4 meters using Maxsurf and Hydromax in analyzing the calculation were in its assessment using interval per 500 mm length so that it can get detail data toward longitudinal and transverse such as studying Ship planning in general. The test result shows dry dock gate meets IMO standard with ballast construction containing 54% and 68% and using fix ballast can produce GMt 1,924 m, tide height 11,357m. The GMt value indicates dry dick gate can be stable and firmly erect at the base of the mouth dry dock. When empty ballast produces GMt 0.996 which means dry dock date is stable, but can easily be torn down. The condition can be used during dry dock gate treatment.

  19. del cambio

    Directory of Open Access Journals (Sweden)

    Alejandro Canales

    2006-01-01

    Full Text Available El artículo analiza las propuestas y los compromisos en materia de cobertura y de financiamiento en el periodo 2000-2006. En particular, revisa las modificaciones y los ajustes de los tres principales documentos en los que se expresaron las iniciativas: el de la Asociación Nacional de Universidades e Instituciones de Educación Superior, el del equipo de la transición y el programa sectorial. Los resultados muestran que las cifras de atención a la demanda educativa e inversión quedaron lejos de las metas autoimpuestas por el gobierno federal y que será necesario realizar mayores esfuerzos para atender tales desafíos.

  20. Leaf gas exchange in the frankincense tree (Boswellia papyrifera) of African dry woodlands

    NARCIS (Netherlands)

    Mengistu, T.; Sterck, F.J.; Fetene, M.; Tadesse, W.; Bongers, F.

    2011-01-01

    A conceptual model was tested for explaining environmental and physiological effects on leaf gas exchange in the deciduous dry tropical woodland tree Boswellia papyrifera (Del.) Hochst. For this species we aimed at (i) understanding diurnal patterns in leaf gas exchange, (ii) exploring cause–effect

  1. Spent fuel drying system test results (first dry-run)

    International Nuclear Information System (INIS)

    Klinger, G.S.; Oliver, B.M.; Abrefah, J.; Marschman, S.C.; MacFarlan, P.J.; Ritter, G.A.

    1998-07-01

    The water-filled K-Basins in the Hanford 100 Area have been used to store N-Reactor spent nuclear fuel (SNF) since the 1970s. Because some leaks in the basin have been detected and some of the fuel is breached due to handling damage and corrosion, efforts are underway to remove the fuel elements from wet storage. An Integrated Process Strategy (IPS) has been developed to package, dry, transport, and store these metallic uranium fuel elements in an interim storage facility on the Hanford Site. Information required to support the development of the drying processes, and the required safety analyses, is being obtained from characterization tests conducted on fuel elements removed from the K-Basins. A series of whole element drying tests (reported in separate documents, see Section 7.0) have been conducted by Pacific Northwest National Laboratory (PNNL) on several intact and damaged fuel elements recovered from both the K-East and K-West Basins. This report documents the results of the first dry-run test, which was conducted without a fuel element. The empty test apparatus was subjected to a combination of low- and high-temperature vacuum drying treatments that were intended to mimic, wherever possible, the fuel treatment strategies of the IPS. The data from this dry-run test can serve as a baseline for the first two fuel element tests, 1990 (Run 1) and 3128W (Run 2). The purpose of this dry-run was to establish the background levels of hydrogen in the system, and the hydrogen generation and release characteristics attributable to the test system without a fuel element present. This test also serves to establish the background levels of water in the system and the water release characteristics. The system used for the drying test series was the Whole Element Furnace Testing System, described in Section 2.0, which is located in the Postirradiation Testing Laboratory (PTL, 327 Building). The test conditions and methodology are given in section 3.0, and the experimental

  2. Treatment of Dry Eye Disease.

    Science.gov (United States)

    Marshall, Leisa L; Roach, J Michael

    2016-02-01

    Review of the etiology, clinical manifestations, and treatment of dry eye disease (DED). Articles indexed in PubMed (National Library of Medicine), Iowa Drug Information Service (IDIS), and the Cochrane Reviews and Trials in the last 10 years using the key words "dry eye disease," "dry eye syndrome," "dry eye and treatment." Primary sources were used to locate additional resources. Sixty-eight publications were reviewed, and criteria supporting the primary objective were used to identify useful resources. The literature included practice guidelines, book chapters, review articles, original research articles, and product prescribing information for the etiology, clinical manifestations, diagnosis, and treatment of DED. DED is one of the most common ophthalmic disorders. Signs and symptoms of DED vary by patient, but may include ocular irritation, redness, itching, photosensitivity, visual blurring, mucous discharge, and decreased tear meniscus or break-up time. Symptoms improve with treatment, but the condition is not completely curable. Treatment includes reducing environmental causes, discontinuing medications that cause or worsen dry eye, and managing contributing ocular or systemic conditions. Most patients use nonprescription tear substitutes, and if these are not sufficient, other treatment is prescribed. These treatments include the ophthalmic anti-inflammatory agent cyclosporine, punctal occlusion, eye side shields, systemic cholinergic agents, and autologous serum tears. This article reviews the etiology, symptoms, and current therapy for DED.

  3. La superaci??n del modelo del ??ngel del hogar:

    OpenAIRE

    Hurtado Mu??oz, M??nica

    2012-01-01

    La Tesis Doctoral titulada "La superaci??n del modelo del "??ngel del hogar". Recuperaci??n de la escritora Leonor Canalejas y Fustegueras (1869-1945)" aborda, en primer lugar, un an??lisis sociol??gico de las circunstancias que rodearon a la mujer espa??ola en el cambio de siglo en el ??mbito social y educativo, en un intento de esclarecer las caracter??sticas propias del contexto en el que la mujer accede a la intelectualidad en general y a la literatura en particular. Esta parte concluye q...

  4. Efecto del secado térmico y el tratamiento alcalino en las características microbiológicas y químicas de biosólidos de plantas de tratamiento de aguas residuales domésticas Effect of thermal drying and alkaline treatment on the microbiological and chemical characteristics of biosolids from domestic wastewater treatment plants

    Directory of Open Access Journals (Sweden)

    Jorge Silva-Leal

    2013-01-01

    Full Text Available We evaluated the effect of thermal drying (60 to 75 ºC and times from 0 to 12.58 h and alkaline treatment (Ca(OH2 and CaO at doses from 8 to 10%. on the microbiological and chemical characteristics of biosolids from the Cañaveralejo WWTP. The results showed that in thermal drying all temperatures studied were sufficient to achieve the sanitation of biosolids. In the alkaline treatment the two types of lime showed the total elimination of fecal coliforms, E. coli and helminth eggs, however, the process of alkalization of biosolids had significant influences on organic carbon and calcium.

  5. Tropical savannas and dry forests.

    Science.gov (United States)

    Pennington, R Toby; Lehmann, Caroline E R; Rowland, Lucy M

    2018-05-07

    In the tropics, research, conservation and public attention focus on rain forests, but this neglects that half of the global tropics have a seasonally dry climate. These regions are home to dry forests and savannas (Figures 1 and 2), and are the focus of this Primer. The attention given to rain forests is understandable. Their high species diversity, sheer stature and luxuriance thrill biologists today as much as they did the first explorers in the Age of Discovery. Although dry forest and savanna may make less of a first impression, they support a fascinating diversity of plant strategies to cope with stress and disturbance including fire, drought and herbivory. Savannas played a fundamental role in human evolution, and across Africa and India they support iconic megafauna. Copyright © 2018 Elsevier Ltd. All rights reserved.

  6. Dry Fruits and Diabetes Mellitus

    Directory of Open Access Journals (Sweden)

    Khan Sohaib A

    2017-04-01

    Full Text Available Dry fruits are some of the essential foods a human body requires staying healthy. They are made after extracting water from them. These fruits are full of essential nutrients including minerals, vitamins, enzymes, fibers and protect the body from a number of different adversities. These fruits are also a source of healthy nutrition among diabetic people who are very concerned about what to eat and what not to eat. But besides their countless benefits, these dry fruits can cause a number of harms to the body and therefore, must be used in a balanced way. This article is based on healthy and unhealthy effects of dry fruits and their use in diabetes mellitus.

  7. Freeze-dried microarterial allografts

    International Nuclear Information System (INIS)

    Raman, J.; Hargrave, J.C.

    1990-01-01

    Rehydrated freeze-dried microarterial allografts were implanted to bridge arterial defects using New Zealand White rabbits as the experimental model. Segments of artery from the rabbit ear and thigh were harvested and preserved for a minimum of 2 weeks after freeze-drying. These allografts, approximately 1 mm in diameter and ranging from 1.5 to 2.5 cm in length, were rehydrated and then implanted in low-pressure and high-pressure arterial systems. Poor patency was noted in low-pressure systems in both allografts and autografts, tested in 12 rabbits. In the high-pressure arterial systems, allografts that were freeze-dried and reconstituted failed in a group of 10 rabbits with an 8-week patency rate of 30 percent. Gamma irradiation in an effort to reduce infection and antigenicity of grafts after freeze-drying was associated with a patency rate of 10 percent at 8 weeks in this system in another group of 10 rabbits. Postoperative cyclosporin A therapy was associated with a patency rate of 22.2 percent in the high-pressure arterial system in a 9-rabbit group. Control autografts in this system in a group of 10 rabbits showed a 100 percent patency at 8 weeks. Microarterial grafts depend on perfusion pressure of the vascular bed for long-term patency. Rehydrated freeze-dried microarterial allografts do not seem to function well in lengths of 1 to 2.5 cm when implanted in a high-pressure arterial system. Freeze-dried arterial allografts are probably not antigenic

  8. Foam-mat drying technology: A review.

    Science.gov (United States)

    Hardy, Z; Jideani, V A

    2017-08-13

    This article reviews various aspects of foam-mat drying such as foam-mat drying processing technique, main additives used for foam-mat drying, foam-mat drying of liquid and solid foods, quality characteristics of foam-mat dried foods, and economic and technical benefits for employing foam-mat drying. Foam-mat drying process is an alternative method that allows the removal of water from liquid materials and pureed materials. In this drying process, a liquid material is converted into foam that is stable by being whipped after adding an edible foaming agent. The stable foam is then spread out in sheet or mat and dried by using hot air (40-90°C) at atmospheric pressure. Methyl cellulose (0.25-2%), egg white (3-20%), maltodextrin (0.5-05%), and gum Arabic (2-9%) are the commonly utilized additives for the foam-mat drying process at the given range, either combined together for their effectiveness or individual effect. The foam-mat drying process is suitable for heat sensitive, viscous, and sticky products that cannot be dried using other forms of drying methods such as spray drying because of the state of product. More interest has developed for foam-mat drying because of the simplicity, cost effectiveness, high speed drying, and improved product quality it provides.

  9. 7 CFR 58.813 - Dry whey.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Dry whey. 58.813 Section 58.813 Agriculture... Products Bearing Usda Official Identification § 58.813 Dry whey. The quality requirements for dry whey shall be in accordance with the U.S. Standards for Dry Whey. Supplemental Specifications for Plants...

  10. Economics of dry storage systems

    International Nuclear Information System (INIS)

    Moore, G.R.; Winders, R.C.

    1980-01-01

    This paper postulates a dry storage application suitable as a regional away-from-reactor storage (AFR), develops an economical system design concept and estimates system costs. The system discussed uses the experience gained in the dry storage research activities and attempts to present a best foot forward system concept. The major element of the system is the Receiving and Packaging Building. In this building fuel assemblies are removed from transportation casks and encapsulated for storage. This facility could be equally applicable to silo, vault, or caisson storage. However the caisson storage concept has been chosen for discussion purposes

  11. Drying properties and quality parameters of dill dried with intermittent and continuous microwave

    OpenAIRE

    Eştürk, Okan

    2012-01-01

    In this study, influence of various microwave-convective air drying applications on drying kinetics, color and sensory quality of dill leaves (Anethum graveolens L.) were investigated. In general, increasing the drying air temperature decreased the drying time, and increased the drying rate. Increasing microwave pulse ratio increased the drying time. Page, Logarithmic, Midilli et al, Wang & Singh and Logistic models were fitted to drying data and the Page model was found to satisfactorily...

  12. Blades Couple Dry Friction Connection

    Czech Academy of Sciences Publication Activity Database

    Půst, Ladislav; Pešek, Luděk; Radolfová, Alena

    2015-01-01

    Roč. 9, č. 1 (2015), s. 31-40 ISSN 1802-680X Institutional support: RVO:61388998 Keywords : stick-slip dry friction * 3D friction characteristic * tangential contact stiffness * hysterezis loop * response curves Subject RIV: BI - Acoustics

  13. THE DIRT ON DRY MERGERS

    International Nuclear Information System (INIS)

    Desai, Vandana; Soifer, B. T.; Dey, Arjun; Cohen, Emma; Le Floc'h, Emeric

    2011-01-01

    Using data from the Spitzer Space Telescope, we analyze the mid-infrared (3-70 μm) spectral energy distributions of dry merger candidates in the Booetes field of the NOAO Deep Wide-Field Survey. These candidates were selected by previous authors to be luminous, red, early-type galaxies with morphological evidence of recent tidal interactions. We find that a significant fraction of these candidates exhibit 8 and 24 μm excesses compared to expectations for old stellar populations. We estimate that a quarter of dry merger candidates have mid-infrared-derived star formation rates greater than ∼1 M sun yr -1 . This represents a 'frosting' on top of a large old stellar population, and has been seen in previous studies of elliptical galaxies. Further, the dry merger candidates include a higher fraction of star-forming galaxies relative to a control sample without tidal features. We therefore conclude that the star formation in these massive ellipticals is likely triggered by merger activity. Our data suggest that the mergers responsible for the observed tidal features were not completely dry, and may be minor mergers involving a gas-rich dwarf galaxy.

  14. DRY TRANSFER FACILITY SEISMIC ANALYSIS

    International Nuclear Information System (INIS)

    EARNEST, S.; KO, H.; DOCKERY, W.; PERNISI, R.

    2004-01-01

    The purpose of this calculation is to perform a dynamic and static analysis on the Dry Transfer Facility, and to determine the response spectra seismic forces for the design basis ground motions. The resulting seismic forces and accelerations will be used in a subsequent calculation to complete preliminary design of the concrete shear walls, diaphragms, and basemat

  15. Dry technologies and community bureaucracies

    DEFF Research Database (Denmark)

    Rasmussen, Mattias Borg

    2014-01-01

    Irrigation channels criss-cross the Andes, bringing water to the dry soils of the peasants' fields. To obtain water, people must deal not only with the amount of water and the physical terrain, but also with concerns of others and matters of the social terrain....

  16. Dry spent fuel storage licensing

    International Nuclear Information System (INIS)

    Sturz, F.C.

    1995-01-01

    In the US, at-reactor-site dry spent fuel storage in independent spent fuel storage installations (ISFSI) has become the principal option for utilities needing storage capacity outside of the reactor spent fuel pools. Delays in the geologic repository operational date at or beyond 2010, and the increasing uncertainty of the US Department of Energy's (DOE) being able to site and license a Monitored Retrievable Storage (MRS) facility by 1998 make at-reactor-site dry storage of spent nuclear fuel increasingly desirable to utilities and DOE to meet the need for additional spent fuel storage capacity until disposal, in a repository, is available. The past year has been another busy year for dry spent fuel storage licensing. The licensing staff has been reviewing 7 applications and 12 amendment requests, as well as participating in inspection-related activities. The authors have licensed, on a site-specific basis, a variety of dry technologies (cask, module, and vault). By using certified designs, site-specific licensing is no longer required. Another new cask has been certified. They have received one new application for cask certification and two amendments to a certified cask design. As they stand on the brink of receiving multiple applications from DOE for the MPC, they are preparing to meet the needs of this national program. With the range of technical and licensing options available to utilities, the authors believe that utilities can meet their need for additional spent fuel storage capacity for essentially all reactor sites through the next decade

  17. Apparatus for drying sugar cubes

    NARCIS (Netherlands)

    Derckx, H.A.J.; Torringa, H.M.

    1999-01-01

    Device for drying sugar cubes containing a heating apparatus for heating and dehumidifying the sugar cubes, a conditioning apparatus for cooling off and possibly further dehumidifying the sugar cubes and a conveying apparatus for conveying the sugar cubes through the heating apparatus and the

  18. Some Physics Inside Drying Droplets

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 19; Issue 2. Some Physics Inside Drying Droplets. Dileep Mampallil. General Article Volume 19 Issue 2 February 2014 pp 123-134. Fulltext. Click here to view fulltext PDF. Permanent link: https://www.ias.ac.in/article/fulltext/reso/019/02/0123-0134 ...

  19. Fluidization of Dried Wastewater Sludge.

    Czech Academy of Sciences Publication Activity Database

    Hartman, Miloslav; Pohořelý, Michael; Trnka, Otakar

    2007-01-01

    Roč. 178, 3 (2007) , s. 166-172 ISSN 0032-5910 R&D Projects: GA AV ČR(CZ) IAA4072201 Institutional research plan: CEZ:AV0Z40720504 Keywords : fluidization characteristics * multiphase reactors * dried stabilized wastewater sludge Subject RIV: CI - Industrial Chemistry, Chemical Engineering Impact factor: 1.130, year: 2007

  20. Dry release of suspended nanostructures

    DEFF Research Database (Denmark)

    Forsén, Esko Sebastian; Davis, Zachary James; Dong, M.

    2004-01-01

    , the technique enables long time storage and transportation of produced devices without the risk of stiction. By combining the dry release method with a plasma deposited anti-stiction coating both fabrication induced stiction, which is mainly caused by capillary forces originating from the dehydration...

  1. Flavour release from dried vegetables

    NARCIS (Netherlands)

    Ruth, van S.M.

    1995-01-01

    The research described in this thesis was focused on the development of an in vitro model system for isolation of volatile compounds from dried vegetables under mouth conditions, such as volume of the mouth, temperature, salivation and mastication. Instrumental analysis of these

  2. Determination of drying characteristics and quality properties of eggplant in different drying conditions

    Directory of Open Access Journals (Sweden)

    Gözde Bayraktaroglu Urun

    2015-12-01

    Full Text Available Drying is the most traditional process used for preserving eggplant a long time. The aim of this study was to determining drying characteristics and quality properties of eggplant dried by sun drying, hot air convective drying and infrared assisted convective drying. Convective drying and infrared assisted convective were carried out in a convective dryer at three different temperatures(40°, 50°, 60°C and air velocity at 5 m/s.The increasing of temperatures during the drying of eggplant led to a significant reduction of the drying time. However loss of nutrition was observed in eggplant samples dried at higher temperature.The biggest change in colour parameters was observed in samples dried with sun drying.So it was thought that sun drying had a negative effect on quality properties of eggplant samples.

  3. GARGANTA SECA Y ARENA EN LAS BOTAS: PROSPECTANDO ANTECEDENTES ARQUEOLÓGICOS DE LAS TIERRAS ÁRIDAS DEL NORESTE MENDOCINO (CENTRO OESTE ARGENTINO (Dry throat and sand in the boots: Prospecting archaeological backgrounds of the Mendoza Northeastern drylands, Argentinian Center South

    Directory of Open Access Journals (Sweden)

    Horacio Chiavazza

    2009-03-01

    Full Text Available Aquí se presenta un detallado estado de las investigaciones arqueológicas desarrolladas en el noreste de la provincia argentina de Mendoza. Esta zona es objeto de estudios desde principios del siglo XX. Sin embargo los pulsos de la investigación han registrado etapas de abandono total y de intervenciones selectivas. Los investigadores han partido de los trabajos precedentes para explicar por extensión las modalidades de asentamiento en la totalidad del territorio norte y, sobre todo, del occidente montañoso, que era donde concentraban sus campañas. Esto acabó generando un cuadro de antecedentes desequilibrado y superficial en el conocimiento de dicha área, con implicaciones en el cuadro interpretativo general de la prehistoria local. En este caso, indagamos las posibles causas que dieron lugar a tal proceso, sus vínculos con los enfoques teóricos y metodologías dominantes a lo largo del siglo XX y su relación con la selección de zonas para llevar a cabo estudios de campo en el norte de la provincia. Reflexionamos críticamente sobre los alcances, límites y posibilidades que ofrece la región para profundizar los análisis arqueológicos del poblamiento prehispánico en relación con las condiciones del ambiente y los procesos históricos documentados, proponiendo discutir los enfoques que basan sus explicaciones en hechos dados por sentados y que merecerían antes una discusión en base a la evidencia disponible. ENGLISH: Here is a detailed state of archaeological research developed in the northeastern Argentine province of Mendoza. This area is the subject of studies since the early twentieth century. However, the pulses of the investigation have been stages of total abandonment and selective interventions. This ended up creating an unbalanced picture of history and superficial knowledge of that area, with implications for the general picture of prehistory interpreted locally. In this case, we investigate the possible causes

  4. Solar Drying in Hot and Dry Climate of Jaipur

    OpenAIRE

    Parikh, Darshit; Agrawal, G. D.

    2016-01-01

    Objective of the present study was to design, develop and to carry out detail experimentation and then analyze solar cabinet dryer. For these various types of solar dryer, their principles and design methods, modeling, drying temperature, efficiency, utilization of dryer and payback period were reviewed. In the present study, solar cabinet dryer is constructed at Mechanical Engineering Department, M.N.I.T, Jaipur, latitude (26.01° N). The measurement of solar intensity, temperatures, relative...

  5. Drying kinetics and characteristics of dried gambir leaves using solar heating and silica gel dessicant

    Science.gov (United States)

    Hasibuan, R.; Hidayati, J.; Sundari, R.; Wicaksono, A. S.

    2018-02-01

    A drying combination of solar heating and silica gel dessicant has been applied to dry gambir leaves. The solar energy is captured by a collector to heat the air and the hot air is used to dry gambir leaves in a drying chamber. An exhaust fan in drying chamber assists to draw water molecules from gambir leaves accelerated by silica gel dessicant. This study has investigated the drying kinetics and drying characteristics of gambir leaves drying. In drying operation the air velocity is tuned by a PWM (pulse width modulation) controller to adjust minimum and maximum level, which is based on the rotation speed of the exhaust fan. The results show that the air velocity influenced the drying kinetics and drying characteristics of gambir leaves using solar-dessicant drying at 40 cm distance between exhaust fan and silica gel dessicant.

  6. Cracking in Drying Colloidal Films

    Science.gov (United States)

    Singh, Karnail B.; Tirumkudulu, Mahesh S.

    2007-05-01

    It has long been known that thick films of colloidal dispersions such as wet clays, paints, and coatings crack under drying. Although capillary stresses generated during drying have been recently identified as the cause for cracking, the existence of a maximum crack-free film thickness that depends on particle size, rigidity, and packing has not been understood. Here, we identify two distinct regimes for crack-free films based on the magnitude of compressive strain at the maximum attainable capillary pressure and show remarkable agreement of measurements with our theory. We anticipate our results to not only form the basis for design of coating formulations for the paints, coatings, and ceramics industry but also assist in the production of crack-free photonic band gap crystals.

  7. Dry storage of Magnox fuel

    International Nuclear Information System (INIS)

    1986-09-01

    This work, commissioned by the CEGB, studies the feasibility of a combination of short-term pond storage and long-term dry storage of Magnox spent fuel as a cheaper alternative to reprocessing. Storage would be either at the reactor site or a central site. Two designs are considered, based on existing design work done by GEC-ESL and NNC; the capsule design developed by NNC and with storage in passive vaults for up to 100 yrs and the GEC-ESL tube design developed at Wylfa for the interim storage of LWR. For the long-term storage of Magnox spent fuel the GEC-ESL tubed vault all-dry storage method is recommended and specifications for this method are given. (U.K.)

  8. Accelerated dry curing of hams.

    Science.gov (United States)

    Marriott, N G; Kelly, R F; Shaffer, C K; Graham, P P; Boling, J W

    1985-01-01

    Uncured pork legs from the right side of 18 carcasses were treated with a Ross Tenderizer and the left side were controls. All 36 samples were dry-cured for 40, 56 or 70 days and evaluated for appearance traits, cure penetration characteristics, microbial load, Kramer Shear force and taste attributes. The tenderization treatment had no effect (P > 0·05) on visual color or cure penetration rate, weight loss before curing, percentage moisture, nitrate level, nitrite level, total plate count, anaerobic counts, psychrotrophic counts, objective and subjective tenderness measurements or juiciness. However, the higher values of salt suggested a possible acceleration of the dry cure penetration process among the tenderized samples. Cure time had no effect (P > 0·05) on percentage moisture, percentage salt, nitrate content, nitrite content, shear force and juiciness. Results suggest a limited effect of the mechanical tenderization process on certain traits related to dry curing and that total process time should be at least 70 days if color stability during cooking is desired. Copyright © 1985. Published by Elsevier Ltd.

  9. Equipment selection for atmospheric drying

    Energy Technology Data Exchange (ETDEWEB)

    Sharma, P D; Bhattacharyya, S [Nuclear Power Corporation, Bhabha Atomic Research Centre, Mumbai (India)

    1994-06-01

    Heavy water management is a major factor in deciding the economics of the PHWRs. Hence it is necessary to have an efficient recovery system, for the heavy water vapour escaping from various process systems and maintain a dry atmosphere in the recovery areas. While the basic objective of the atmospheric drying system is to maximize recovery and to minimize stack losses, it is equally important to optimally design the system with due consideration to operational and maintenance aspects. At present, heavy water vapour recovery in the existing Nuclear Power Plants (NPPs) is carried out by dryers of dual fixed bed design. While moving bed design could have some advantages, this has not been adopted so far because of the cumbersome mechanical design involved and special requirements for nuclear application. Developmental work done in this direction has resulted in compact alternative designs. In one of the designs, the change over from adsorption to regeneration is achieved by rotating the bed slowly. This concept is further refined in another alternative using a dessicant wheel. This paper contains brief equipment description of different designs; enumerates the design requirements of an atmospheric drying system for reactor building; describes steps for designing fixed bed type D{sub 2}O vapour recovery system, and highlights advances in dryer technology. (author). 2 refs., 4 figs., 1 ill.

  10. Acerca del moho

    Science.gov (United States)

    El moho forma parte del medio ambiente natural. Afuera del hogar, el moho juega un papel en la naturaleza al desintegrar materias organicas tales como las hojas que se han caido o los arboles muertos. El moho puede crecer adentro del hogar cuando las espor

  11. Del bit al qubit

    OpenAIRE

    Torras Font, Josep

    2011-01-01

    Aquest document pretén donar una visió del desenvolupament dels computadors electrònics i dels components que els han fet possibles. Dintre de les opcions de futur en computació, també intenta donar una visió de les bases en que es fonamenta la computació quàntica.

  12. Determinación del requerimiento hídrico del pimentón en el municipio de Candelaria, departamento del Valle del Cauca Water requeriments of pepper in Candelaria, Valle del Cauca, Colombia

    Directory of Open Access Journals (Sweden)

    Adriana Gómez Enríquez

    2010-10-01

    Full Text Available Se realizó un ensayo con el fin de determinar el requerimiento hídrico del pimentón Capsicum annuum variedad Unapal-Serrano, en la zona de Candelaria-Valle del Cauca (Colombia. Se determinó que el pimentón requiere 425mm de agua durante su ciclo vegetativo, obteniendo una eficiencia del uso del agua de 5.32 kg/m³ de fruto fresco y de 0.5 kg/m³ en términos de materia seca. Además, se comprobó la eficiencia del microevaporímetro 'MIEVHR' como herramienta para programación del riego y estudios hidrológicos.A trial was carried out in order to determining the water requirement of the pepper Capsicum annuum variety UNAPAL- Serrano in the zone of Candelaria -Valley of the Cauca (Colombia and to evaluate the efficiency of the microevaporímeter 'MIEVHR' as estimator of the evaporation. It was determined that the pepper requires 425mm of water during the cycle vegetative obtaining an efficiency of the use of the water of 5.32 Kg/m³ of fresh fruit and 0.5 kg/m³ in terms of dry matter. Besides, it was verified the microevaporímeter efficiency 'MIEVHR' as tool for programming of the irrigation.

  13. The subtle attractions of dry vault storage

    International Nuclear Information System (INIS)

    Ealing, C.J.

    1993-01-01

    Utilities in the United States of America, Scotland and Hungary have all adopted dry vault technology in their plans for spent fuel storage. This article looks at what makes dry storage an attractive option. (author)

  14. Herbal dryer: drying of ginger (zingiber officinale) using tray dryer

    Science.gov (United States)

    Haryanto, B.; Hasibuan, R.; Alexander; Ashari, M.; Ridha, M.

    2018-02-01

    Drying is widely used as a method to preserve food because of its convenience and affordability. Drying of ginger using tray dryer were carried out at various drying conditions, such as air-drying flow, air-drying temperature, and sample dimensions, to achieve the highest drying rate. Samples with various dimensions were placed in the tray dryer and dried using various air-drying flow and temperatures. The weights of samples were observed every 3 minutes interval. Drying was stopped after three times of constant weighing. Data of drying was collected to make the drying curves. Drying curves show that the highest drying rate is achieved using highest air flow and temperature.

  15. Infrared Drying as a Quick Preparation Method for Dried Tangerine Peel

    Directory of Open Access Journals (Sweden)

    Mingyue Xu

    2017-01-01

    Full Text Available To establish the most convenient and effective method to dry tangerine peels, different methods (sun drying, hot-air drying, freeze drying, vacuum drying, and medium- and short-wave infrared drying were exploited. Our results indicated that medium- and short-wave infrared drying was the best method to preserve nutraceutical components; for example, vitamin C was raised to 6.77 mg/g (D.W. from 3.39 mg/g (sun drying. Moreover, the drying time can be shortened above 96% compared with sun drying. Importantly, the efficiency of DPPH radical scavenging was enhanced from 26.66% to 55.92%. These findings would provide a reliable and time-saving methodology to produce high-quality dried tangerine peels.

  16. Accelerating oak air drying by presurfacing

    Science.gov (United States)

    W. T. Simpson; R. C. Baltes

    1972-01-01

    A comparison was made between the air-drying rates of rough and presurfaced northern red oak and white oak. In both species, the presurfaced material was about 1/8 inch thinner than the rough material and dried faster than the rough material. The reduction in drying time depends on the method of analyzing the drying curves, but is slightly less than 10 percent.

  17. Latest Apple Drying Technologies: A Review

    OpenAIRE

    ÖZDEMİR, Yasin; SAYIN, Emir Olcay; KURULTAY, Şefik

    2009-01-01

    Drying is known as one of the oldest preservation methods and can be applicable to many fruits. Sun drying of apple has been known from ancient times. However, this technique is weather-dependent and has contamination problems such as dust, soil, sand particles and insects. Hot air drying of apples has low energy efficiency and requires longer drying period. The desire to eliminate these problems, prevent quality loss, and achieve fast and effective thermal processing has resulted in an incre...

  18. Effects of Aging in Dry Eye

    Science.gov (United States)

    de Paiva, Cintia S.

    2017-01-01

    Dry eye affects millions of people worldwide and causes eye well recognized risk factors for dry eye. Anatomical and inflammation-induced age-related changes affect all components of the lacrimal gland functional unit, inclusive of lacrimal gland, conjunctiva, meibomian gland and compromise ocular surface health. There is increased evidence that inflammation plays a role in dry eye. This review will summarize the current knowledge about aging and dry eye, inclusive of lessons learned from animal models and promising therapies. PMID:28282314

  19. Selective dry cow treatment in dairy cows

    OpenAIRE

    Scherpenzeel, C.G.M.

    2017-01-01

    In the dairy industry, udder health is associated with mastitis management, of which blanket dry cow treatment has been an important part for decades. To prevent the udder from new intramammary infections during the dry period, the use of blanket dry cow treatment has been advocated for more than 50 years as part of the five-point mastitis prevention program. The goal of dry cow treatment is to reduce the prevalence of intramammary infections by eliminating infections already present at dryin...

  20. Impact of dry eye on work productivity

    Directory of Open Access Journals (Sweden)

    Yamada M

    2012-10-01

    Full Text Available Masakazu Yamada, Yoshinobu Mizuno, Chika ShigeyasuNational Institute of Sensory Organs, National Hospital Organization Tokyo Medical Center, Tokyo, JapanBackground: The purpose of this study was to evaluate the impact of dry eye on work productivity of office workers, especially in terms of presenteeism.Methods: A total of 396 individuals aged ≥20 years (258 men and 138 women, mean age 43.4 ± 13.0 years were recruited through an online survey. Data from 355 responders who did not have missing values were included in the analysis. They were classified into the following four groups according to the diagnostic status and subjective symptoms of dry eye: a definite dry eye group; a marginal dry eye group; a self-reported dry eye group; and a control group. The impact of dry eye on work productivity was evaluated using the Japanese version of the Work Limitations Questionnaire. The cost of work productivity loss associated with dry eye and the economic benefits of providing treatment for dry eye were also assessed.Results: The degree of work performance loss was 5.65% in the definite dry eye group, 4.37% in the marginal dry eye group, 6.06% in the self-reported dry eye group, and 4.27% in the control group. Productivity in the self-reported dry eye group was significantly lower than that in the control group (P < 0.05. The annual cost of work productivity loss associated with dry eye was estimated to be USD 741 per person.Conclusion: Dry eye impairs work performance among office workers, which may lead to a substantial loss to industry. Management of symptoms of dry eye by providing treatment may contribute to improvement in work productivity.Keywords: burden of disease, dry eye, presenteeism, quality of life

  1. la Universidad del Zulia (LUZ

    Directory of Open Access Journals (Sweden)

    Marisol Fucci

    2006-01-01

    Full Text Available Actualmente los servicios de información y las relaciones interinstitucionales, se traducen en acciones y potencialidades que ninguna organización puede desasistir.Este artículo tiene como objetivo diseñar un modelo de gestión de los servicios de información concebidos bajo el enfoque de la gerencia estratégica, para optimar las Relaciones Interinstitucionales en la Universidad del Zulia. Para lograr el objetivo propuesto se ha elaborado un estudio descriptivo. Como técnica de recolección de datos se diseñó un instrumento tipo cuestionario aplicado a una muestra de 382 personas, dividida de la siguiente manera: 315 estudiantes de pregrado, 17 estudiantes de postgrado, 33 docentes y 17 empleados; para medir las variables servicio de información y sus dimensiones, necesidades informativas, satisfacci ón y expectativas de los usuarios, tipos de servicios, definición de políticas y normas. Finalmente se concluye que es necesario: 1 la operatividad del Modelo de gestión de los servicios informativos bajo el enfoque de la gerencia estratégica para la DRI, a fin de alcanzar la formulación, ejecución y evaluación de estrategias que permitan el mejor funcionamiento y desarrollo de los servicios; 2 operacionalizar la efectiva gestión para las políticas del servicio de información, lo cual permitirá, guiar las metas y objetivos propuestos con mayor claridad, oportunidad, fluidez y coordinación; 3 definir estrategias, orientadas a la promoción y difusión de los servicios de información bajo los parámetros de asertividad, veracidad y oportunidad, lo cual garantizará la consolidación y efectividad de las relaciones interinstitucionales

  2. Microwave wood strand drying: energy consumption, VOC emission and drying quality

    Energy Technology Data Exchange (ETDEWEB)

    Wang, S.; Du, G.; Zhang, Y. [Tennessee Univ., Knoxville, TN (United States). Dept. of Forestry, Wildlife and Fisheries

    2005-07-01

    The objective of this research was to develop microwave drying technology for wood strand drying for oriented strand board (OSB) manufacturing. The advantages of microwave drying included a reduction in the drying time of wood strands and a reduction in the release of volatile organic compounds (VOC) through a decrease in the thermal degradation of the wood material. Temperature and moisture content changes under different microwave drying conditions were investigated. The effects of microwave drying on VOC emissions were evaluated and analyzed using gas chromatography and mass spectrometry. Microwave power input and the mass of drying materials in the microwave oven were found to have a dominant effect on drying quality. Results indicated that an increase in microwave power input and a decrease in sample weights resulted in high drying temperatures, short drying times and a high drying rate. The effect of microwave drying on the strand surfaces was also investigated. Different strand geometries and initial moisture content resulted in varying warm-up curves, but did not influence final moisture content. VOC emissions were quantified by comparing alpha-pinene concentrations. The microwave drying resulted in lower VOC emissions compared with conventional drying methods. It was concluded that the microwave drying technique provided faster strand drying and reduced energy consumption by up to 50 per cent. In addition, the surface wettability of wood strands dried with microwaves was better than with an industrial rotary drum drier. 12 refs., 3 tabs., 5 figs.

  3. energetic performance analysis of drying agricultural products

    African Journals Online (AJOL)

    user

    ... a solar box dryer aided by a tracking device, and open air drying over an effective total drying time of 6 hours each day, for 5 days. ... cost in the use of modern dryers. Drying can be ..... speed, cloud cover and humidity respectively. 4.2 Solar ...

  4. Drying principles and theory: An overview

    International Nuclear Information System (INIS)

    Ekechukwu, O.V.

    1995-10-01

    A comprehensive review of the fundamental principles and theories governing the drying process is presented. Basic definitions are given. The development of contemporary models of drying of agricultural products are traced from the earliest reported sorption and moisture equilibrium models, through the single kernel of product models to the thin layer and deep bed drying analysis. (author). 29 refs, 10 figs

  5. Selective dry cow treatment in dairy cows

    NARCIS (Netherlands)

    Scherpenzeel, C.G.M.

    2017-01-01

    In the dairy industry, udder health is associated with mastitis management, of which blanket dry cow treatment has been an important part for decades. To prevent the udder from new intramammary infections during the dry period, the use of blanket dry cow treatment has been advocated for more than 50

  6. Economic optimization of selective dry cow treatment

    NARCIS (Netherlands)

    Scherpenzeel, C G M; Hogeveen, H; Maas, L; Lam, T J G M

    2018-01-01

    The objective of this study was to develop a mathematical model to identify a scenario with the lowest costs for mastitis associated with the dry period while restricting the percentage of cows to be dried off with dry cow antimicrobials. Costs of clinical and subclinical mastitis as well as

  7. Albendazole Microparticles Prepared by Spray Drying Technique ...

    African Journals Online (AJOL)

    Purpose: To enhance the dissolution of albendazole (ABZ) using spray-drying technique. Method: ABZ binary mixtures with Kollicoat IR® (KL) and polyvinyl pyrrolidone (PVP) in various drug to polymer ratios (1: 1, 1: 2 and 1; 4) were prepared by spray-drying. The spray-dried particles were characterized for particle shape, ...

  8. Drying characteristics of willow chips and stems

    NARCIS (Netherlands)

    Gigler, J.K.; Loon, van W.K.P.; Seres, I.; Meerdink, G.; Coumans, W.J.

    2000-01-01

    In supply chains of willow (Salix viminalis) biomass to energy plants, drying is advisable in order to enable safe long-term storage, increase boiler efficiency and reduce gaseous emissions. To gain insight into the drying process, drying characteristics of willow chips and stems were investigated

  9. Quality drying of hardwood lumber : guidebook -- checklist

    Science.gov (United States)

    R. S. Boone; M. R. Milota; J. D. Danielson; D. W. Huber

    The IMPROVE Lumber Drying Program is intended to increase awareness of the lumber drying system as a critical component in the manufacture of quality lumber. One objective of the program is to provide easy-to-use tools that a kiln operator can use to maintain an efficient kiln operation and therefore improve lumber drying quality. This report is one component of the...

  10. Quality drying of softwood lumber : guidebook - checklist

    Science.gov (United States)

    M. R. Milota; J. D. Danielson; R. S. Boone; D. W. Huber

    The IMPROVE Lumber Drying Program is intended to increase awareness of the lumber drying system as a critical component in the manufacture of quality lumber. One objective of the program is to provide easy-to-use tools that a kiln operator can use to maintain an efficient kiln operation and therefore contribute to lumber drying quality. This report is one component of...

  11. Inert carrier drying and coating process

    International Nuclear Information System (INIS)

    1980-01-01

    An inert carrier process is described for drying radioactive (particularly low level) waste material and for incorporating the dry material into a binder matrix from which the dried material will not be leached. Experimental details, and examples of the carrier and binder materials, are given. (U.K.)

  12. Análisis de viabilidad de un proyecto de inversión en el sector empresarial, para mejoramiento tecnológico e incremento de producción de la empresa lavacuenca Professionally Dry Clean de la ciudad de Cuenca, provincia del Azuay

    OpenAIRE

    Orellana Bueno, Diego Vinicio; Universidad de Guayaquil. Maestría de la Facultad de Ciencias Administrativas

    2012-01-01

    LAVACUENCA, Professionally Dry Clean, al ser una empresa pequeña, pretende incrementar su producción en un 84% respecto de la cantidad de prendas lavadas en el año 2007, que fue de 67.855 prendas con un promedio mensual de 5.650 prendas. Al producirse este incremento, en el año 2009 alcanzaría a 93.639 prendas mientras que en el 2013 llegaría a 112.367 prendas lavadas, mejorando sustancialmente la estructura productiva y financiera de la empresa al captar más ingresos por ventas. La informaci...

  13. Predicting the drying shrinkage behavior of high strength portland cement mortar under the combined influence of fine aggregate and steel micro fiber; Predicción del comportamiento de retracción por secado de morteros de cemento Pórtland de alta resistencia bajo la influencia combinada de árido fino y micro fibra de acero.

    Energy Technology Data Exchange (ETDEWEB)

    Li, Zhengqi

    2017-07-01

    The workability, 28-day compressive strength and free drying shrinkage of a very high strength (121-142 MPa) steel micro fiber reinforced portland cement mortar were studied under a combined influence of fine aggregate content and fiber content. The test results showed that an increase in the fine aggregate content resulted in decreases in the workability, 28-day compressive strength and drying shrinkage of mortar at a fixed fiber content. An increase in the fiber content resulted in decreases in the workability and drying shrinkage of mortar, but an increase in the 28-day compressive strength of mortar at a fixed fine aggregate content. The modified Gardner model most accurately predicted the drying shrinkage development of the high strength mortars, followed by the Ross model and the ACI 209R-92 model. The Gardner model gave the least accurate prediction for it was developed based on a database of normal strength concrete. [Spanish] Se ha estudiado la trabajabilidad, resistencia a la compresión (28 días) y la retracción al secado de morteros de cemento Pórtland de muy alta resistencia (121-142 MPa) reforzados con micro fibra de acero, con la influencia combinada de contenido de árido fino y de micro fibra de acero. El aumento en el contenido de árido fino resultó en la disminución de la trabajabilidad, resistencia a la compresión y la retracción por secado de los morteros con un contenido de fibra específico. El aumento en el contenido de fibra dio lugar a la disminución de la trabajabilidad y la retracción por secado, y a un aumento en la resistencia a la compresión a 28 días en morteros con un contenido específico de á rido fino. El modelo modificado de Gardner predijo con más precisión la retracción por secado de mortero de alta resistencia, seguido por el modelo de Ross y el modelo ACI 209R-92. El modelo de Gardner dio la predicción menos exacta debido al hecho de que se desarrolló sobre bases de datos de hormigones de resistencia normal.

  14. Zinder: a city running dry.

    Science.gov (United States)

    Price, T

    1993-01-01

    In the West African Sahel lies the old Hausa city of Zinder, Niger. Since the last few decades, it has constantly faced considerable population growth (19,300-119,8000 between 1960 and 1980) while its acute problems with the water supply are increasing. The dry regional climate compounds the problems. In the past, Zinder was a trade center between northern and sub-Saharan Africa as well as being the colonial capital of Niger (1911-26). Its economic and political position has fallen greatly with independence. Lower than average rainfall and the disastrous droughts of the 1970s and 1980s have seriously diminished the region's economic base, e.g., the average annual rainfall in 1930-60 was 535 mm, but by the 1980s, it was only 355 mm. Zinder sits on an elevated, rocky hill which is encircled by dry river valleys and there are no major permanent bodies of water in the vicinity. Impenetrable layers of stone prevent the digging of wells within the city, so the city depends on wells in nearby valleys. The reduced rainfall hinders replenishment of the aquifer, resulting in a drop in the availability of water for daily consumption from 6500 to 3500 sq m. Per capita water consumption in Zinder is much lower than the national average (55 1/day vs. about 100 1/day). The drought in 1992 caused per capita consumption to fall to 29 1/day, just barely above the minimal standards for private use in urban areas of 20 1/person/day. To further compound the problem, 20 villages in Zinder's environs, some villages with a population of 5000, people, rely on the same water system. Zinder serves as a refuge for the regional population in drought years and during the yearly dry season. Promised international financing cannot resolve Zinder's problems at a realistic cost.

  15. Impact of dry eye on work productivity.

    Science.gov (United States)

    Yamada, Masakazu; Mizuno, Yoshinobu; Shigeyasu, Chika

    2012-01-01

    The purpose of this study was to evaluate the impact of dry eye on work productivity of office workers, especially in terms of presenteeism. A total of 396 individuals aged ≥20 years (258 men and 138 women, mean age 43.4 ± 13.0 years) were recruited through an online survey. Data from 355 responders who did not have missing values were included in the analysis. They were classified into the following four groups according to the diagnostic status and subjective symptoms of dry eye: a definite dry eye group; a marginal dry eye group; a self-reported dry eye group; and a control group. The impact of dry eye on work productivity was evaluated using the Japanese version of the Work Limitations Questionnaire. The cost of work productivity loss associated with dry eye and the economic benefits of providing treatment for dry eye were also assessed. The degree of work performance loss was 5.65% in the definite dry eye group, 4.37% in the marginal dry eye group, 6.06% in the self-reported dry eye group, and 4.27% in the control group. Productivity in the self-reported dry eye group was significantly lower than that in the control group (P work productivity loss associated with dry eye was estimated to be USD 741 per person. Dry eye impairs work performance among office workers, which may lead to a substantial loss to industry. Management of symptoms of dry eye by providing treatment may contribute to improvement in work productivity.

  16. Dry-cleaning of graphene

    International Nuclear Information System (INIS)

    Algara-Siller, Gerardo; Lehtinen, Ossi; Kaiser, Ute; Turchanin, Andrey

    2014-01-01

    Studies of the structural and electronic properties of graphene in its pristine state are hindered by hydrocarbon contamination on the surfaces. Also, in many applications, contamination reduces the performance of graphene. Contamination is introduced during sample preparation and is adsorbed also directly from air. Here, we report on the development of a simple dry-cleaning method for producing large atomically clean areas in free-standing graphene. The cleanness of graphene is proven using aberration-corrected high-resolution transmission electron microscopy and electron spectroscopy

  17. Dry-cleaning of graphene

    Energy Technology Data Exchange (ETDEWEB)

    Algara-Siller, Gerardo [Central Facility for Electron Microscopy, Group of Electron Microscopy of Materials Science, Ulm University, Albert-Einstein-Allee 11, Ulm 89081 (Germany); Department of Chemistry, Technical University Ilmenau, Weimarer Strasse 25, Ilmenau 98693 (Germany); Lehtinen, Ossi; Kaiser, Ute, E-mail: ute.kaiser@uni-ulm.de [Central Facility for Electron Microscopy, Group of Electron Microscopy of Materials Science, Ulm University, Albert-Einstein-Allee 11, Ulm 89081 (Germany); Turchanin, Andrey [Faculty of Physics, University of Bielefeld, Universitätsstr. 25, Bielefeld 33615 (Germany)

    2014-04-14

    Studies of the structural and electronic properties of graphene in its pristine state are hindered by hydrocarbon contamination on the surfaces. Also, in many applications, contamination reduces the performance of graphene. Contamination is introduced during sample preparation and is adsorbed also directly from air. Here, we report on the development of a simple dry-cleaning method for producing large atomically clean areas in free-standing graphene. The cleanness of graphene is proven using aberration-corrected high-resolution transmission electron microscopy and electron spectroscopy.

  18. Dry storage of spent fuel

    International Nuclear Information System (INIS)

    Jeffrey, R.

    1993-01-01

    Scottish Nuclear's plans to build and operate dry storage facilities at each of its two nuclear power station sites in Scotland are explained. An outline of where waste materials arise as part of the operation and decommissioning of nuclear power stations, the volumes for each category of high-, intermediate-and low-level wastes and the costs involved are given. The present procedure for the spent fuels from Hunterston-B and Torness stations is described and Scottish Nuclear's aims of driving output up and costs down are studied. (UK)

  19. Dry deposition on urban surfaces

    International Nuclear Information System (INIS)

    Roed, J.

    1985-01-01

    In order to facilitate developing a model for deposition in urban areas, beryllium-7, created by cosmic radiation and fall-out cesium-137, have been used as tracers in measurements designed to find the dry deposition velocity on building surfaces. A literature review has revealed that very little work has been done on deposition in urban areas; therefore, a major effort on meausring the deposition parameter is needed to construct reliable models in this field. Deposition velocities in the range from 0.001-0.04 cm/s have been found. (author)

  20. Dry containment of radioactive materials

    International Nuclear Information System (INIS)

    Williams, C.E.

    1980-01-01

    A cask for the dry containment of radioactive fuel elements is described. The cask has a cover which contains valved drain and purge passageways. These passageways are sealed by after purge cover seals which are clamped over them and to the outer surface of the cover. The cover seals are tested by providing them with a pair of concentric ring seal elements squeezed between the cover seal and the outer surface of the cover and by forcing a gas under pressure into the annular region between the seal element

  1. Dry decontamination for tritiated wastes

    International Nuclear Information System (INIS)

    Shi Zhengkun; Wu Tao; Dan Guiping; Xie Yun

    2009-01-01

    To aim at decontamination of tritiated wastes, we have developed and fabricated a dry tritium decontamination system, which is designed to reduce tritium surface contamination of various alloy by UV, ozone and heating. The result indicates that the elevation of temperature can obviously improve decontamination effect. With 3 h irradiation by 365 nm UV at 220 degree C, it has a decontamination rate of 99% to stainless steel surface. Ozone can more obviously improve decontamination effect when metal was heated. Ozone has a decontamination effect beyond 95% to stainless steel, aluminum and brass at 220 degree C. Tritium surface concentration of metal has a little increase after decontamination. (authors)

  2. Single droplet drying for optimal spray drying of enzymes and probiotics

    NARCIS (Netherlands)

    Schutyser, M.A.I.; Perdana, J.A.; Boom, R.M.

    2012-01-01

    Spray drying is a mild and cost-effective convective drying method. It can be applied to stabilise heat sensitive ingredients, such as enzymes and probiotic bacteria, albeit in industrial practice for example freeze drying or freezing are often preferred. The reason is that optimum drying conditions

  3. Theoretical and practical aspects of aroma retention in spray drying and freeze drying

    NARCIS (Netherlands)

    Coumans, W.J.; Kerkhof, P.J.A.M.; Bruin, S.

    1994-01-01

    A review with 75 refs. on aroma loss in slab drying, spray drying and freeze drying. For many food products the presence of volatile aroma components is a prime quality feature. Upon drying part of these components may be lost, leading to unbalanced flavor patterns in the reconstituted product. The

  4. Dry Transfer Systems for Used Nuclear Fuel

    Energy Technology Data Exchange (ETDEWEB)

    Brett W. Carlsen; Michaele BradyRaap

    2012-05-01

    The potential need for a dry transfer system (DTS) to enable retrieval of used nuclear fuel (UNF) for inspection or repackaging will increase as the duration and quantity of fuel in dry storage increases. This report explores the uses for a DTS, identifies associated general functional requirements, and reviews existing and proposed systems that currently perform dry fuel transfers. The focus of this paper is on the need for a DTS to enable transfer of bare fuel assemblies. Dry transfer systems for UNF canisters are currently available and in use for transferring loaded canisters between the drying station and storage and transportation casks.

  5. Spray drying for processing of nanomaterials

    International Nuclear Information System (INIS)

    Lindeloev, Jesper Saederup; Wahlberg, Michael

    2009-01-01

    Consolidation of nano-particles into micron-sized granules reduces the potential risks associated with handling nano-powders in dry form. Spray drying is a one step granulation technique which can be designed for safe production of free flowing low dusty granules from suspensions of nano-particles. Spray dried granules are well suited for subsequent processing into final products where the superior properties given by the nano-particles are retained. A spray drier with bag filters inside the drying chamber and recycling of drying gas combined with containment valves are proposed as a safe process for granulation of potential hazardous nano-particles.

  6. Algunas aclaraciones acerca del conocimiento del singular.

    Directory of Open Access Journals (Sweden)

    Carlos Llano Cifuentes

    2013-11-01

    Full Text Available Llano tries to explain the main purpose of El Conocimiento del Singular, showing how the individuals about which the book is concerned are basically human individuals: people as decision makers.

  7. Atmospheric freeze drying assisted by power ultrasound

    International Nuclear Information System (INIS)

    Santacatalina, J V; Cárcel, J A; Garcia-Perez, J V; Mulet, A; Simal, S

    2012-01-01

    Atmospheric freeze drying (AFD) is considered an alternative to vacuum freeze drying to keep the quality of fresh product. AFD allows continuous drying reducing fix and operating costs, but presents, as main disadvantage, a long drying time required. The application of power ultrasound (US) can accelerate AFD process. The main objective of the present study was to evaluate the application of power ultrasound to improve atmospheric freeze drying of carrot. For that purpose, AFD experiments were carried out with carrot cubes (10 mm side) at constant air velocity (2 ms −1 ), temperature (−10°C) and relative humidity (10%) with (20.5 kWm −3 ,USAFD) and without (AFD) ultrasonic application. A diffusion model was used in order to quantify the influence of US in drying kinetics. To evaluate the quality of dry products, rehydration capacity and textural properties were determined. The US application during AFD of carrot involved the increase of drying rate. The effective moisture diffusivity identified in USAFD was 73% higher than in AFD experiments. On the other hand, the rehydration capacity was higher in USAFD than in AFD and the hardness of dried samples did not show significant (p<0.05) differences. Therefore, US application during AFD significantly (p<0.05) sped-up the drying process preserving the quality properties of the dry product.

  8. Technique of solar drying the linden

    International Nuclear Information System (INIS)

    Fonseca Fonseca, Susana; Andión Torres, Ronald; Espinosa Borges, Ruberlando; Torres Ten, Alonso; Arzuaga Machado, Yusnel; Fuentes lombá, Osmay

    2017-01-01

    In Santiago of Cuba exists interest in the utilization of medicinal plants for the manufacture of flowed abstract and Tinturas, and this requires the dry product. At the present time this process is done in houses roofed. This product will be dried at 10 or 12 days. Having in account than in the Center of investigation of Solar Energy was developed a prototype of solar drier, which enables the drying of the anamu with the required quality, in this work is done a study, for the utilization of the aforementioned drier, for the drying of others medicinal plants. It is determine and evaluated experimentally a Procedure of drying of linden in this solar drier. The dry plants were sent to the UBPC La Rosita of medicinal plants, which manifested conformity with the obtained results, showing contentment with the quality of the dry product. (author)

  9. Dry well storage of spent LWBR fuel

    International Nuclear Information System (INIS)

    Christensen, A.B.; Fielding, K.D.

    1985-01-01

    Recently, 50 dry wells were constructed at the Idaho Chemical Processing Plant (ICPP) to temporarily store the Light Water Breeder Reactor (LWBR) fuel. Over 400 dry wells of the same design are projected to be constructed in the next 5 yr at the ICPP to store unreprocessible fuels until a permanent repository becomes available. This summary describes the LWBR fuel storage dry wells and the enhancements made over the Peach Bottom fuel and Fermi blanket dry wells that have been in use for up to 4 yr. Dry well storage at the ICPP has historically been found to be a safe and efficient method of temporary fuel storage. The LWBR dry wells should be more reliable than the original dry wells and provide data not previously available

  10. Impregnation of leather during "freeze-drying"

    DEFF Research Database (Denmark)

    Storch, Mikkel; Vestergaard Poulsen Sommer, Dorte; Hovmand, Ida

    2016-01-01

    Freeze-drying is a recognized method for the preservation of waterlogged objects. Naturally, freeze-drying has also been used for waterlogged archaeological leather often after treatment with Na2.EDTA and impregnation with PEG; but the treated leather sometimes suffers from “excessive drying......” becoming too stiff and brittle. The aim of this study was to examine the effect of a conventional freeze-drying method against an alternative freeze-drying method that preserves the natural moisture content of the leather. Both new and archaeological waterlogged leather were included in the study...... suggest that the process which takes place within the leather during the freeze-drying in not actual freeze-drying, but rather a sophisticated way of distributing the impregnating agent. The pure ice phase freezes out, but the impregnating agent remains liquid as the temperature does not become low enough...

  11. Dry shrinkage characteristics of buffer materials

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, H. [ITC, Tokai, Ibaraki (Japan); Fujita, A.

    1999-03-01

    Generation of cracks due to drying of compressed bentonite was observed by changing the initial water content to obtain shrinkage constants such as shrinkage limit and shrinking rate. As a result, generation of practically no cracks was observed when the initial water content of samples was below 13%. The volume change due to drying increased with the water content in the sample, and the shrinkage constants were found to depend on the initial water content. Further, the one-dimensional compression strength after drying was compared with that before drying in order to clarify the effect of cracks generated by drying on the mechanical strength. As a result, the dry sample with cracks proved to have large one-dimensional compression strength or E{sub 50} compared to wet samples, so that the mechanical strength was kept even after drying. (H. Baba)

  12. Dry etching technology for semiconductors

    CERN Document Server

    Nojiri, Kazuo

    2015-01-01

    This book is a must-have reference to dry etching technology for semiconductors, which will enable engineers to develop new etching processes for further miniaturization and integration of semiconductor integrated circuits.  The author describes the device manufacturing flow, and explains in which part of the flow dry etching is actually used. The content is designed as a practical guide for engineers working at chip makers, equipment suppliers and materials suppliers, and university students studying plasma, focusing on the topics they need most, such as detailed etching processes for each material (Si, SiO2, Metal etc) used in semiconductor devices, etching equipment used in manufacturing fabs, explanation of why a particular plasma source and gas chemistry are used for the etching of each material, and how to develop etching processes.  The latest, key technologies are also described, such as 3D IC Etching, Dual Damascene Etching, Low-k Etching, Hi-k/Metal Gate Etching, FinFET Etching, Double Patterning ...

  13. Radiation disinfestation of dry fruits

    International Nuclear Information System (INIS)

    Khan, I.; Sattar, A.; Wahid, M.; Jan, M.

    1985-01-01

    Dry fruits such as apricots, dates, figs, and raisins were irradiated in a Gamma Cell 220 (dose rate 0.04 kGy/min). Radiation doses used were 0.25, 0.50, and 1.00 kGy, and the samples were stored at room temperatures (25 to 40 0 C) after packaging in polyethylene pouches. Insect infestation and the changes in acidity, discoloration, ascorbic acid, and sugars were determined after 2,4,6,8,10, and 12 months. A radiation dose of 1.00 kGy completely inhibited infestation throughout the storage, while infestation in 0.50 and 0.25 kGy samples increased with storage time between 2 and 10 months. It was 100 percent in all fruits except raisins (60 percent) after 12 months. Tribolium species were predominant in all of the samples followed by the Caudra and Corcyra species. Discoloration increased, acidity and ascorbic acid contents decreased significantly (P < 0.05), and sugars were little affected during the entire storage. Radiation doses had insignificant influence on these nutrients except for the ascorbic acid, which was adversely affected, especially at higher doses (P < 0.05). Results of sensory evaluation of dried fruits showed 1.00 kGy treated samples rated as highest, 0.25 and 0.50 kGy as intermediates, and the control as lowest during different storage intervals

  14. Dry rod consolidation technology development

    International Nuclear Information System (INIS)

    Rasmussen, T.L.; Schoonen, D.H.; Feldman, E.M.; Fisher, M.W.

    1987-01-01

    The Department of Energy's (DOE) Office of Civilian Radioactive Waste Management (OCRWM) is funding a program to consolidate commercial spent fuel for testing in dry storage casks and to develop technology that will be fed into other OCRWM programs, e.g., Prototypical Consolidation Demonstration Program (PCDP). The program is being conducted at the Idaho National Engineering Laboratory (INEL) by the INEL Operating Contractor EG and G Idaho, Inc. Hardware and software have been designed and fabricated for installation in a hot cell adjacent to the Test Area North (TAN) Hot Shop Facility. This equipment is used to perform dry consolidation of commercial spent fuel from the Virginia Power (VP) Cooperative Agreement Spent Fuel Storage Cask (SFSC) Demonstration Program and assemblies that had previously been stored at the Engine Maintenance and Disassembly (EMAD) facility in Nevada. Consolidation is accomplished by individual, horizontal rod pulling. A computerized semiautomatic control system with operator involvement is utilized to conduct consolidation operations. During consolidation operations, data is taken to characterize this technology. Still photo, video tape, and other documentation will be generated to make developed information available to interested parties. Cold checkout of the hardware and software was completed in September of 1986. Following installation in the hot cell, consolidation operations begins in May 1987. Resulting consolidated fuel will be utilized in the VP Cooperative Agreement SFSC Program

  15. Dry rod consolidation technology development

    International Nuclear Information System (INIS)

    Rasmussen, T.L.; Schoonen, D.H.; Fisher, M.W.

    1986-01-01

    The Department of Energy's (DOE) Office of Civilian Radioactive Waste Management (OCRWM) is funding a Program to consolidate commercial spent fuel for testing in dry storage casks and to develop technology that will be fed into other OCRWM Programs, e.g., Prototypical Consolidation Demonstration Program. The Program is being conducted at the Idaho National Engineering Laboratory (INEL) by the Operating Contractor, EGandG Idaho, Inc. Hardware and software have been designed and fabricated for installation in a hot cell adjacent to the Test Area North (TAN) Hot Shop Facility. This equipment will be used to perform dry consolidation of commercial spent fuel from the Virginia Power (VP) Cooperative Agreement Spent Fuel Storage Cask (SPSC) Demonstration Program and assemblies that had previously been stored at the Engine Maintenance and Disassembly (EMAD) facility in Nevada. Consolidation will be accomplished by individual, horizontal rod pulling. A computerized semi-automatic control system with operator involvement will be utilized to conduct consolidation operations. Special features have been incorporated in the design to allow crud collection and measurement of rod pulling forces. During consolidation operations, data will be taken to characterize this technology. Still photo, video tape, and other documentation will be generated to make developed information available to interested parties. Cold checkout of the hardware and software will complete in September of 1986. Following installation in the hot cell, consolidation operations will begin in January 1987. Resulting consolidated fuel will be utilized in the VP Cooperative Agreement SFSC Program

  16. Hot dry rock heat mining

    International Nuclear Information System (INIS)

    Duchane, D.V.

    1992-01-01

    Geothermal energy utilizing fluids from natural sources is currently exploited on a commercial scale at sites around the world. A much greater geothermal resource exists, however, in the form of hot rock at depth which is essentially dry. This hot dry rock (HDR) resource is found almost everywhere, but the depth at which usefully high temperatures are reached varies from place to place. The technology to mine the thermal energy from HDR has been under development for a number of years. Using techniques adapted from the petroleum industry, water is pumped at high pressure down an injection well to a region of usefully hot rock. The pressure forces open natural joints to form a reservoir consisting of a small amount of water dispensed in a large volume of hot rock. This reservoir is tapped by second well located at some distance from the first, and the heated water is brought to the surface where its thermal energy is extracted. The same water is then recirculated to mine more heat. Economic studies have indicated that it may be possible to produce electricity at competitive prices today in regions where hot rock is found relatively close to the surface

  17. Environmental history of the dry forest biome of Guerrero, Mexico, and human impact during the last c. 2700 years

    NARCIS (Netherlands)

    Berrio, J.C.; Hooghiemstra, H.; van Geel, B.; Ludlow-Wiegers, B.

    2006-01-01

    Two lake sediment cores from Madre del Sur mountain range, Guerrero State, west-central Mexico were studied to examine the past dynamics of the dry forest biome. Pollen, spores of coprophilous fungi, cyanobacteria and lithological changes are presented. The 390-cm Tixtla core (17°30′N, 99°24′W, 1400

  18. Drying behaviour, effective diffusivity and energy of activation of olive leaves dried by microwave, vacuum and oven drying methods

    Science.gov (United States)

    Elhussein, Elaf Abdelillah Ali; Şahin, Selin

    2018-01-01

    Drying is the crucial food processing for bioactive components from plant materials before strating extraction in addition to preservation of raw plant materials during storage period. Olive leaves were dried by various methods such as microwave drying (MD), oven drying (OD) and vacuum drying (VD) at several temperature values in the present study. Mathematical models allow to develop, design and control the processes. 14 emprical equations were used to estimate the drying behaviour and the time required for drying. Convenience of the models were evaluated according to the correlation coefficient (R 2 ), varience (S 2 ) and root mean square deviation (D RMS ). On the other hand, the effective diffusion coefficient and energy for activation were also calculated. Effects of the drying methods on the total phenolic (TPC), flavonoid (TFC) and oleuropein contents and free radical scavenging activity (FRSA) of the olive leaves were also investigated to take into considiration the quality of the dried product. MD has proved to be the fastest drying method having the highest effective diffusivity and the lowest activation energy with a more qualitive product.

  19. Variables affecting lipid oxidation in dried microencapsulated oils

    Directory of Open Access Journals (Sweden)

    Márquez-Ruiz, Gloria

    2003-09-01

    Full Text Available Dried microencapsulated oils are powdery foods or ingredients, prepared by drying natural or formulated emulsions, wherein the oil globules are dispersed in a matrix of saccharides and/or proteins. The study of lipid oxidation in microencapsulated oils is a very difficult task since, in addition to the numerous variables normally involved in lipid oxidation, mainly unsaturation degree, oxygen, light, temperature, prooxidants and antioxidants, other factors exert an important influence in these heterophasic lipid systems. In this paper, the present state of the art on lipid oxidation in dried microencapsulated oils is reviewed, focused on the variables specifically involved in oxidation of these lipid systems. Such variables include those pertaining to the preparation process (type and concentration of the matrix components and drying procedure and those related to the physicochemical properties of microencapsulated oils (particle size, oil globule size, lipid distribution, water activity, pH and interactions between matrix components.Los aceites microencapsulados son alimentos o ingredientes en polvo preparados mediante secado de emulsiones naturales o formuladas, donde los glóbulos de aceite se encuentran dispersos en una matriz de hidratos de carbono y/o proteínas. El estudio de la oxidación lipídica en aceites microencapsulados es muy difícil ya que, además de las numerosas variables implicadas normalmente en la oxidación lipídica, principalmente el grado de insaturación, oxígeno, luz, temperatura, prooxidantes y antioxidantes, en estos sistemas lipídicos heterofásicos existen otros factores que ejercen una importante influencia. En este trabajo, se revisa la situación actual del conocimiento sobre oxidación lipídica en aceites microencapsulados en relación con las variables que intervienen específicamente en la oxidación de estos sistemas lipídicos. Concretamente, dichas variables incluyen las implicadas en el proceso de

  20. Total phenolics, antioxidant capacity, colour and drying characteristics of date fruit dried with different methods

    Directory of Open Access Journals (Sweden)

    Gökçen İZLİ

    2016-01-01

    Full Text Available Abstract Date slices were dried with the three drying methods convective (60, 70 and 80 °C, microwave (120 W and freeze drying to determine drying characteristics and to compare the dried fruit quality. All colour parameters changed depending on the drying method and colours closest to the fresh sample were obtained with freeze drying. It is interesting to note that the total phenolic content and antioxidant capacity in each sample rose when looked at in relation to the fresh sample. In particular, microwave-dried samples were recorded as having the highest total phenolic content and the highest antioxidant capacity. To explain the drying kinetics of the date slices, nine thin-layer drying models were also attempted. Based on statistical tests, the model developed by Midilli et al. model was found to be the best model for convective and microwave drying, but the Two Term model was the best for freeze drying. This study shows that microwave drying can produce high quality date slices with the additional advantage of reduced drying times compared to convective and freeze drying.

  1. Efecto del método de secado en la longevidad y la calidad de las semillas de Bauhinia purpurea.: I. Almacenamiento en Condiciones Ambientales Effect of the drying method on the longevity and quality of seeds from Bauhinia purpurea.: I. Storage under ambient conditions

    Directory of Open Access Journals (Sweden)

    Marlen Navarro

    2007-11-01

    Full Text Available Se realizó un experimento con el objetivo de determinar la influencia combinada de diferentes métodos de secado, las condiciones de almacenamiento al ambiente y la edad fisiológica de las semillas de B. purpurea, en la capacidad germinativa y en la calidad de estas. Los tratamientos para el secado fueron: A en las legumbres, B artificial, y C al sol. Se determinó el porcentaje de viabilidad y de germinación, así como el contenido de humedad (CH, con una frecuencia mensual durante un año de almacenamiento; además se registró la temperatura y la humedad relativa (máxima y mínima durante el período evaluado. En el procesamiento de la información se utilizaron análisis multivariados (GLM y Factorial. En los tratamientos A y C se observaron semejanzas en cuanto a la viabilidad y la germinación, aunque las semillas alcanzaron la muerte fisiológica a los siete y nueve meses de permanencia en el almacén, respectivamente. El secado de las semillas con silicagel mostró que la pérdida de la capacidad germinativa siguió un modelo polinomial cúbico, con una marcada tendencia a la linealidad, y al finalizar el estudio fue de 70%. Las diferencias entre el CH de las semillas secadas artificialmente (B y al sol (C permitieron confirmar que la longevidad en B fue dos a cuatro veces mayor que en C. Los factores más influyentes en el ritmo de pérdida de la calidad de las semillas B. purpurea almacenadas al ambiente fueron el contenido de humedad y la edad.A trial was carried out with the objective of determining the combined influence of different drying methods, the storage under ambient conditions and the physiological age of the seeds from B. purpurea, on their germination capacity and quality. The treatments for drying were: A in the pods, B artificial and C under sunlight. The percentage of viability and germination, as well as the moisture content (MC, were determined, with a monthly frequency during a year of storage; in addition the

  2. Diversity of Genetic Resources and Genetic Association Analyses of Green and Dry Chillies of Eastern India Diversidad de Recursos Genéticos y Análisis de Asociación Genética de Ajíes Verdes y Secos del Este de India

    Directory of Open Access Journals (Sweden)

    Arup Chattopadhyay

    2011-09-01

    Full Text Available Chilli (Capsicum annuum L. is regarded as one of the main commercial vegetable and spice crops at the global level. Maximum diversity can be noted among the cultivars/landraces available in India with respect to shape, size, yield, quality, and other traits. The present experiment was conducted to identify the most promising chilli variety suited for green and dry purposes, to study the genetic variability for different traits and to assess the association of different yield attributing traits with the green and dry yield of chilli. Thirty four genotypes were characterized during a 2-yr period. Most of the genotypes possessed the character constellation of C. annuum. Two genotypes, ‘Chaitali Pointed’ and ‘BC CH Sel-4’ were found most promising with respect to green fruit yield (272.79 g, 221.10 g per plant and dry fruit yield (54.56 g, 44.44 g per plant. Phenotypic and Genotypic Coefficient of Variation values for green fruit weight (119.95%, 111.26%, green fruit girth (89.76%, 48.93%, weight of red ripe fruit (112.02%, 111.93%, weight of dry fruit (111.63%, 110.97% and number of fruits per plant (86.05%, 85.02% were recorded to be high. Green fruit yield per plant, ascorbic acid content, and number of fruits per plant also showed very high broad-sense heritability and genetic advance. From the study of correlation and path coefficient analyses, the number of fruits per plant, green fruit length for green chilli, weight of dry fruit and the number of fruits per plant for dry chilli were found to the most important selection indices.El ají (Capsicum annuum L. es considerado como uno de los principales cultivos comerciales de vegetales y especias a nivel mundial. La máxima diversidad puede ser observada entre los cultivares y razas disponibles en India con respecto a forma, tamaño, producción, calidad, y otros rasgos. Este experimento se realizó para identificar la variedad de ají más promisoria y apropiada para fruto verde y seco

  3. Force convective solar drying system

    International Nuclear Information System (INIS)

    Ruslan, M.H.; Othman, M.Y.; Baharuddin Yatim; Kamaruzzaman Sopian; Ibarahim, Z.

    2006-01-01

    This paper presents design and performance of V-groove back-pass solar collector for solar drying system. In this study three V-groove back-pass solar collector each with dimension of 4.6 m x 1.0 m x 0.15 m have been fabricated for solar drying system. An outdoor test at mean solar intensity for 600-800 Wm -2 by using 0.15m 3 s -1 of air flow rate which also been suggested by (Zeroul et al. 1994) was carried out at Solar Research Energy Park. Universiti Kebangsaan Malaysia. Analysis on the collector performance based on daily data was reported that the value of FR ) e and FRUL was 0.709 ± 0.001 and 5.89 ± 0.31 Wm -2o C -1 respectively with 60-70 o C of output temperature (Ruslan et al. 2001). The three V-groove collectors each with dimension 4.6 m x 0.15 m were connected in series array mounted on the roof of a solar assisted drying system. By using two electric fans of 85W and 2700 rpm each, the speed of air was regulated at 0.11 kgs -1 to 0.31 kgs -1 using a voltage regulator. Performance of the collector based on the thermal analysis showed that at mean daily solar radiation 700 Wm -2 , the output temperature of 52 o C to 73 o C could be achieved using 0.11-0.31 kgs -1 of flow rate. Thermal analysis also showed that the efficiencies of 45% to 61% could be obtains using the same flow rate and solar radiation. Analysis of daily data showed that for radiation from 300 Wm -2 to 1000 Wm -2 the power generated from the collector was within 1.5 kW to 8.9 kW. The study concluded that the levels of the levels of the solar radiation and flow rate used influenced the performance of the collector

  4. Psicodrama del duelo.

    OpenAIRE

    José Antonio Espina Barrio; Marisol Filgueira Bouza

    1997-01-01

    La pérdida de rituales agrava y alarga la reacción del duelo. Se define el Psicodrama Antropológico y su intervención en el proceso del duelo. El Psicodrama Focal del Duelo es una psicoterapia breve centrada en el proceso de Duelo. Se comentan varios casos y resultados. Se concluye con un programa sencillo para el duelo en Atención Primaria.

  5. Fractura triple del complejo suspensorio del hombro

    Directory of Open Access Journals (Sweden)

    Eraclio Delgado Rifá

    2015-06-01

    Full Text Available El complejo suspensorio del hombro es una estructura sumamente importante, compuesta por un anillo de huesos y tejidos blandos. Las lesiones aisladas de este complejo anatómico son frecuentes y no afectan su estabilidad. La interrupción doble conduce a la inestabilidad de esta estructura y usualmente requiere tratamiento quirúrgico. La triple interrupción, por su parte, es sumamente rara y es encontrada en casos de trauma de alta energía a menudo en asociación con otras lesiones. Se presenta una triple lesión del complejo suspensorio del hombro en un paciente de 46 años de edad, con una fractura de la glenoides, del acromion tipo III de Kuhn y de la coracoides tipo II de Ogawa. En este caso, la fractura del acromion fue tratada con fijación percutánea con alambres de Kirschner, por tener asociado lesiones de partes blandas que contraindicaron la reducción abierta. La fractura de la glenoides y de la apófisis coracoides fueron tratadas conservadoramente. Después de 6 meses de evolución, el paciente tuvo un resultado funcional aceptable, con una abducción de 90 grados, los 30 grados de rotación externa y 70 de rotación interna, además asintomático y consolidación de todas las fracturas. A pesar de ser catalogada de una lesión grave del cinturón escapular y estar asociada a otras lesiones se obtuvo un resultado satisfactorio al final del tratamiento.

  6. Vigencia del Darwinismo

    OpenAIRE

    Lessa, Enrique P

    2009-01-01

    En este ensayo se presenta una revisión histórica del signifcado y legado del darwinismo, con énfasis en el último siglo. La principal conclusión es que la visión darwiniana de la evolución, con las modifcaciones requeridas para dar cuenta de los grandes desarrollos de la disciplina, se ha impuesto y mantiene vigencia en nuestros días. En particular, el papel del azar, la evolución como proceso de “descendencia con modifcación” a lo largo de diversas ramas del árbol de la vida, el pensamiento...

  7. Management of dry eye disease.

    Science.gov (United States)

    Lemp, Michael A

    2008-04-01

    The management of dry eye disease (DED) encompasses both pharmacologic and nonpharmacologic approaches, including avoidance of exacerbating factors, eyelid hygiene, tear supplementation, tear retention, tear stimulation, and anti-inflammatory agents. Artificial tears are the mainstay of DED therapy but, although they improve symptoms and objective findings, there is no evidence that they can resolve the underlying inflammation in DED. Topical corticosteroids are effective anti-inflammatory agents, but are not recommended for long-term use because of their adverse-effect profiles. Topical cyclosporine--currently the only pharmacologic treatment approved by the US Food and Drug Administration specifically for DED--is safe for long-term use and is disease-modifying rather than merely palliative. Treatment selection is guided primarily by DED severity. Recently published guidelines propose a severity classification based on clinical signs and symptoms, with treatment recommendations according to severity level.

  8. Model Stickiness in Spray Drying

    DEFF Research Database (Denmark)

    Petersen, Thomas

    only slightly and then typically moved slightly away before either stopping with contact (sticky) or bouncing with no contact (non-sticky). Sticky particles had a large apparent contact angle, similar to what would be expected for a liquid with poor wetting properties. The velocity did not seem...... to change this much, although slight deformation was seen when the impact velocity was at the highest used values. The phenomenon did not appear to change noticeable when the droplet was dried in a high relative humidity environment. The qualitative difference observable between Teon and stainless steel...... was very limited. On Stainless steel the droplet seemed to wet slightly more after the initial impact while the contact area was constant for Teon. Modelling work was carried out to help understand the phenomenon, but also to investigate how the impact scaled for particle size. This was done using...

  9. Radioactivity of some dried fruits

    International Nuclear Information System (INIS)

    Akhmedova, G.; Mamatkulov, O.B.; Hushmuradov, Sh.H.

    2004-01-01

    Full text: Radioactivity radiation from natural and artificial sources often acts at the same time in complicated combinations and without exception on all inhabitants of our planet. Natural and artificial radioactive isotopes pass into living organism by biological chain: soil-water-air-plants-foodstuffs-person and can be sources of inside irradiation. Accumulation of radionuclides in living organism in large quantities limit permissible concentration (LPC) can lead to pathological changes in organism. With above mentioned at the radioecological investigations, researches and control of changes of radionuclides concentration in environmental objects have important interests. Investigations of determination of radioactivity of environmental objects, which began in 1960 by professor Muso Muminov are continued in the department of nuclear physics of Samarkand State University. We work out semiconducting gamma-spectrometric method of determination of radionuclides concentration in weak -active environmental samples. We investigated radioactivity of different samples of natural environment and generalized results. In this work the results of investigation of radioactivity of same dried fruits are presented. The spectra of γ-radiation of following dried fruits as grapes, apricot, apple and peach was investigated. In measured gamma-radiation spectra of these samples gamma-transitions of 226 Ra, 232 Th, 40 K natural radionuclides and product of 137 Cs division. The specific gamma-activities these radionuclides were determined. The 40 K have most specific activity and 137 Cs - least. The calculated quantities of specific gamma-activity of radionuclides in gamma-spectra of investigated samples can replace to following row: 40 K > 232 Th > 226 Ra > 137 Cs

  10. Drying Kinetics Analysis of Seaweed Gracilaria changii using Solar Drying System

    International Nuclear Information System (INIS)

    Mohd Yusof Othman; Ahmad Fudholi; Kamaruzzaman Sopian; Mohd Hafidz Ruslan; Muhammad Yahya

    2012-01-01

    A solar drying system suitable for agricultural and marine products have been designed, constructed and evaluated under Malaysia climatic conditions. The solar drying system has been constructed and evaluated for the drying of seaweed Gracilaria changii. The initial and final moisture content of seaweed are 95 % (wet basis) and 10 % (product basis), respectively. The drying time was about 7 hours at average solar radiation of 593 W/ m 2 and air flow rate of 0.0613 kg/ s. Three different thin-layer drying models were compared with experimental data, during the drying of seaweed using the solar drying system at average temperature and humidity of about 50 degree Celsius and 20 %, respectively. The one with highest R2 and lowest MBE and RMSE was selected to better estimate the drying curves. The study showed that the Page model was better fit to drying seaweed compared to the other models (Newton model, and Henderson and Pabis model). (author)

  11. Combined electrohydrodynamic (EHD) and vacuum freeze drying of shrimp

    International Nuclear Information System (INIS)

    Hu, Yucai; Huang, Qiang; Bai, Yaxiang

    2013-01-01

    To improve the drying qualities of shrimp, a combination of electrohydrodynamic (EHD) and vacuum freeze drying (FD) is examined. The drying rate, the shrinkage, the rehydration ratio, and the sensory properties including the color and trimness of the dried products under different drying methods (including combination drying of EHD and FD, EHD drying and FD drying) are measured. Compared with FD and EHD drying alone, the combined process consumes less drying time, and the product processed by combined drying displays lower shrinkage, higher rehydration rate and better sensory qualities.

  12. The Challenges of Malaysian Dry Ports Development

    Directory of Open Access Journals (Sweden)

    Jagan Jeevan

    2015-03-01

    Full Text Available This paper examines the functions and challenges of dry ports development in Malaysia through 11 face-to-face interviews with dry port stakeholders. The findings reveal that Malaysian dry ports are developed to accelerate national and international business, to activate intermodalism in the nation, to promote regional economic development and to enhance seaport competitiveness. Malaysian dry ports perform the function of transport and logistics, information processing, seaports and value-added services. Challenges facing Malaysian dry ports include insufficient railway tracks, unorganized container planning on the rail deck, highly dependent on single mode of transportation, poor recognition from the seaport community, and competition from localized seaports. This paper further indicates strategies for coping with these challenges and identifies future opportunities for Malaysian dry ports development.

  13. EVALUATION OF DRY EYES IN DIABETES MELLITUS

    Directory of Open Access Journals (Sweden)

    Anshu Sharma

    2017-12-01

    Full Text Available BACKGROUND According to the National Eye Institute, dry eye is a condition in which the eye does not produce tears properly. It can also involve tears not having the right consistency or evaporating too quickly. Tears are necessary to help maintain moisture on the surface of the eye and for clear vision. Diabetes is often associated with several significant ocular conditions such as retinopathy, refractive changes, cataracts, glaucoma and macular oedema. However, one of the most common ocular complications associated with diabetes is dry eye. The aim of the study is to study the prevalence of dry eyes in diabetes mellitus and to evaluate ocular and other risk factors relevant to diabetic dry eyes. MATERIALS AND METHODS A hospital-based cross-sectional clinical study of 100 diabetic patients who presented to the Department of Ophthalmology, Santosh Medical College and Hospital, Ghaziabad, between January 2016 to June 2017 was conducted. Detailed diabetic history was recorded. Assessment of anterior segment via slit-lamp biomicroscopy was done. The examinations for dry eyes included Schirmer's test, tear breakup time, fluorescein and rose Bengal staining. RESULTS Sixty two (62% diabetic patients had dry eye. The prevalence in type I was 3% and prevalence in type II was 59%. Dry eye prevalence was maximum in those above 40 years of age. Symptoms like reduced corneal sensation (44% and meibomitis (20% were major attributable risk factors. Ocular surface damage was predominantly superficial punctate keratitis. Retinopathy was not statistically associated with the prevalence of dry eyes. CONCLUSION Diabetes and dry eye appears to be a common association. Reduction in the modifiable risk factors of dry eye is essential to reduce its prevalence. No significant statistical correlation was found between retinopathy and dry eyes. However, examination for dry eyes should be an integral part of the assessment of diabetic eye disease.

  14. How to restore dry forest ecosystems

    OpenAIRE

    Nalvarte, Jaime

    2012-01-01

    AIDER is a Peruvian non-governmental organization working since 1992 on forest management activities, watershed management and urban forest management on tropical humid and dry forest at a national level. AIDER and the José Ignacio Távara Pasapera rural community have been working on dry forest management and recovery since 1992. This paper summarizes the activity of AIDER in the dry forests for the purpose of recovering degraded forest areas and conserve existing forests by developing sustai...

  15. Procedure for drying humidity-containing bodies

    International Nuclear Information System (INIS)

    Johnson, C.R.

    1976-01-01

    The invention concerns a decontamination process for extracting impurities, in particular humidity and gases, from nuclear fuel rods before they are sealed and inserted into the reactor. The fuel rod, which has a small drilling hole, is placed in a low pressure container. The container is filled with a liquid drying agent which washes out the impurities. A dry inert gas (nitrogen, noble gases) is used for rinsing. Alcohols, ketones, methanol, acetone are named as drying agents. (UWI) [de

  16. MODELLING OF THIN LAYER DRYING KINETICS OF COCOA BEANS DURING ARTIFICIAL AND NATURAL DRYING

    Directory of Open Access Journals (Sweden)

    C.L. HII

    2008-04-01

    Full Text Available Drying experiments were conducted using air-ventilated oven and sun dryer to simulate the artificial and natural drying processes of cocoa beans. The drying data were fitted with several published thin layer drying models. A new model was introduced which is a combination of the Page and two-term drying model. Selection of the best model was investigated by comparing the determination of coefficient (R2, reduced chi-square (2 and root mean square error (RMSE between the experimental and predicted values. The results showed that the new model was found best described the artificial and natural drying kinetics of cocoa under the conditions tested.

  17. Effect of drying temperatures on the proximate composition and ...

    African Journals Online (AJOL)

    Results of the proximate composition showed that the nutritional qualities of the dried eggs were retained during drying thus the drying temperature did not affect the quality of eggs. The moisture contents of the dried whole egg, dried egg yolk and dried egg white at the different temperatures range from 6.25 -7.23%, ...

  18. El ordenamiento de cuencas hidrograficas y el ordenamiento ambiental del territorio, en la cuenca del Rio Risalda

    OpenAIRE

    Morales Lozano, Diana Lorena

    2016-01-01

    La cuenca hidrográfica del río Risaralda cuenta con un recorrido corto en el cual cobija dos departamentos (Risaralda y Caldas), se visualizan cambios ecosistémicos, variedad de coberturas, desarrollo de actividades económicas, presencia de actores y distintas labores administrativas. Se define como área de interés para la presente investigación aquella porción perteneciente a la jurisdicción del departamento de Risaralda, identificando la influencia de dos variables: el ordenamiento hídri...

  19. La luz del origen del universo

    Directory of Open Access Journals (Sweden)

    Casas, Alberto

    2015-10-01

    Full Text Available Penzias and Wilson discovered the cosmic microwave background, a luminous echo of the Big Bang, in 1965. The amount of information encoded in this relic of the early universe is truly extraordinary. At present, the most precise data about the origin and structure of the universe comes from the study of this primordial light, the full potential of which has yet to be explored.En 1965 se descubrió el fondo de radiación de microondas, un eco luminoso de la Gran Explosión (Big Bang. La cantidad de información contenida en esta reliquia del universo primitivo es verdaderamente extraordinaria. En la actualidad los datos más precisos sobre el origen y estructura del universo provienen del estudio de esta luz primigenia, que aún no ha sido explorada en todo su potencial.

  20. FINAL REPORT: Transformational electrode drying process

    Energy Technology Data Exchange (ETDEWEB)

    Claus Daniel, C.; Wixom, M.(A123 Systems, Inc.)

    2013-12-19

    This report includes major findings and outlook from the transformational electrode drying project performance period from January 6, 2012 to August 1, 2012. Electrode drying before cell assembly is an operational bottleneck in battery manufacturing due to long drying times and batch processing. Water taken up during shipment and other manufacturing steps needs to be removed before final battery assembly. Conventional vacuum ovens are limited in drying speed due to a temperature threshold needed to avoid damaging polymer components in the composite electrode. Roll to roll operation and alternative treatments can increase the water desorption and removal rate without overheating and damaging other components in the composite electrode, thus considerably reducing drying time and energy use. The objective of this project was the development of an electrode drying procedure, and the demonstration of processes with no decrease in battery performance. The benchmark for all drying data was an 80°C vacuum furnace treatment with a residence time of 18 – 22 hours. This report demonstrates an alternative roll to roll drying process with a 500-fold improvement in drying time down to 2 minutes and consumption of only 30% of the energy compared to vacuum furnace treatment.

  1. Dry Eye: an Inflammatory Ocular Disease

    Science.gov (United States)

    Hessen, Michelle; Akpek, Esen Karamursel

    2014-01-01

    Keratoconjunctivitis sicca, or dry eye, is a common ocular disease prompting millions of individuals to seek ophthalmological care. Regardless of the underlying etiology, dry eye has been shown to be associated with abnormalities in the pre-corneal tear film and subsequent inflammatory changes in the entire ocular surface including the adnexa, conjunctiva and cornea. Since the recognition of the role of inflammation in dry eye, a number of novel treatments have been investigated designed to inhibit various inflammatory pathways. Current medications that are used, including cyclosporine A, corticosteroids, tacrolimus, tetracycline derivatives and autologous serum, have been effective for management of dry eye and lead to measurable clinical improvement. PMID:25279127

  2. Tear dynamics in healthy and dry eyes.

    Science.gov (United States)

    Cerretani, Colin F; Radke, C J

    2014-06-01

    Dry-eye disease, an increasingly prevalent ocular-surface disorder, significantly alters tear physiology. Understanding the basic physics of tear dynamics in healthy and dry eyes benefits both diagnosis and treatment of dry eye. We present a physiological-based model to describe tear dynamics during blinking. Tears are compartmentalized over the ocular surface; the blink cycle is divided into three repeating phases. Conservation laws quantify the tear volume and tear osmolarity of each compartment during each blink phase. Lacrimal-supply and tear-evaporation rates are varied to reveal the dependence of tear dynamics on dry-eye conditions, specifically tear osmolarity, tear volume, tear-turnover rate (TTR), and osmotic water flow. Predicted periodic-steady tear-meniscus osmolarity is 309 and 321 mOsM in normal and dry eyes, respectively. Tear osmolarity, volume, and TTR all match available clinical measurements. Osmotic water flow through the cornea and conjunctiva contribute 10 and 50% to the total tear supply in healthy and dry-eye conditions, respectively. TTR in aqueous-deficient dry eye (ADDE) is only half that in evaporative dry eye (EDE). The compartmental periodic-steady tear-dynamics model accurately predicts tear behavior in normal and dry eyes. Inclusion of osmotic water flow is crucial to match measured tear osmolarity. Tear-dynamics predictions corroborate the use of TTR as a clinical discriminator between ADDE and EDE. The proposed model is readily extended to predict the dynamics of aqueous solutes such as drugs or fluorescent tags.

  3. Drying Rate of Carbonate of Nickel

    Directory of Open Access Journals (Sweden)

    Ing. Aymara Ricardo-Riverón

    2015-11-01

    Full Text Available In the present work, the drying rate of carbonate of nickel was studied experimentally at the laboratory scale. The values of critical moisture are shown and the graphics: characteristic curve of drying rate and the moisture dependence of the time. Models ware obtained to estimate the slope of the constant - rate period and to the falling - rate period until the equilibrium humidity, in dependence of external factors: drying temperature, initial moisture and the pH of the slurry. The chemical composition of the carbonate didn't exercise effect statistically significant over the drying rate.

  4. Recent developments in drying of food products

    Science.gov (United States)

    Valarmathi, T. N.; Sekar, S.; Purushothaman, M.; Sekar, S. D.; Rama Sharath Reddy, Maddela; Reddy, Kancham Reddy Naveen Kumar

    2017-05-01

    Drying is a dehydration process to preserve agricultural products for long period usage. The most common and cheapest method is open sun drying in which the products are simply laid on ground, road, mats, roof, etc. But the open sun drying has some disadvantages like dependent on good weather, contamination by dust, birds and animals consume a considerable quantity, slow drying rate and damages due to strong winds and rain. To overcome these difficulties solar dryers are developed with closed environment for drying agricultural products effectively. To obtain good quality food with reduced energy consumption, selection of appropriate drying process and proper input parameters is essential. In recent years several researchers across the world have developed new drying systems for improving the product quality, increasing the drying rate, decreasing the energy consumption, etc. Some of the new systems are fluidized bed, vibrated fluidized bed, desiccant, microwave, vacuum, freeze, infrared, intermittent, electro hydrodynamic and hybrid dryers. In this review the most recent progress in the field of drying of agricultural food products such as new methods, new products and modeling and optimization techniques has been presented. Challenges and future directions are also highlighted. The review will be useful for new researchers entering into this ever needed and ever growing field of engineering.

  5. Cold vacuum drying facility design requirements

    International Nuclear Information System (INIS)

    IRWIN, J.J.

    1999-01-01

    This document provides the detailed design requirements for the Spent Nuclear Fuel Project Cold Vacuum Drying Facility. Process, safety, and quality assurance requirements and interfaces are specified

  6. Solar drying in sludge management in Turkey

    Energy Technology Data Exchange (ETDEWEB)

    Kamil Salihoglu, Nezih; Pinarli, Vedat; Salihoglu, Guray [Faculty of Engineering and Architecture, Environmental Engineering Department, Uludag University, 16059, Bursa (Turkey)

    2007-08-15

    Two main wastewater treatment plants in Bursa city in Turkey will start to operate and produce at least 27,000 tons of dry solids per year by the end of 2006. The purpose of this study was to investigate an economical solution to the sludge management problem that Bursa city would encounter. The general trend in Turkey is mechanical dewatering to obtain a dry solid (DS) content of 20%, and liming the mechanically dewatered sludge to reach the legal land filling requirement, 35% DS content. This study recommends limited liming and solar drying as an alternative to only-liming the mechanically dewatered sludge. Open and covered solar sludge drying plants were constructed in pilot scale for experimental purposes. Dry solids and climatic conditions were constantly measured. Faecal coliform reduction was also monitored. The specially designed covered solar drying plant proved to be more efficient than the open plant in terms of drying and faecal coliform reduction. It was found that, if the limited liming and solar drying method was applied after mechanical dewatering instead of only-liming method, the total amount of the sludge to be disposed would be reduced by approximately 40%. This would lead to a reduction in the transportation, handling, and land filling costs. The covered drying system would amortize itself in 4 years. (author)

  7. Solar drying of uruguayan red gum

    Directory of Open Access Journals (Sweden)

    Andrés Ono

    2011-04-01

    Full Text Available he use of solar energy as an alternative to non-renewable energy sources has been widely researched in the last decades. Compared to air drying, solar drying kilns can better control the drying process, resulting in a higher quality of the dry wood and lower final wood moisture content values. Investment and running costs for a solar drying kiln are lower than those of a conventional kiln. Moreover, the solar drying process can be advantageous for drying hardwoods which are traditionally considered difficult to dry such as eucalyptus wood of medium and high density (Red gums, known in Spanish as “Eucaliptos colorados”. The solar drying kiln naturally incorporates a daily high relative humidity period that can be similar to a conditioning or steaming step, although at a lower temperature.This results in fewer defects due to the drying process.A pilot scale 2.5 m3 semi-greenhouse type solar wood drying kiln was constructed at LATU (Uruguay Technological Laboratory in Montevideo, Uruguay. The operating conditions and the results from two drying runs are presented. Two species of red gum (Eucalyptus tereticornis Sm., ADD 870 kg/m3, and Eucalyptus camaldulensis Dehnh., ADD 800 kg/m3 were dried from initial average moisture contents (WMC of around 60% down to 10.0% and 12.7% in 108 days and 76 days, respectively. Boards were provided by the Grupo Forestal San Gregorio from trees harvested at Tacuarembo and Paysandu Departments from cattle shelter forests 60 and 70 years old.Mean volume shrinkage was 18% for E. tereticornis, and 16% for E. camaldulensis, and the level of defects was moderate. Residual stresses and moisture content gradients were observed for both species. Final moisture content values were similar compared to those obtained in conventional drying kilns but with longer drying periods and lower operating costs. This would make the solar drying process attractive to small and medium sized forest products industries in a small country

  8. Recent advances in fluidized bed drying

    Science.gov (United States)

    Haron, N. S.; Zakaria, J. H.; Mohideen Batcha, M. F.

    2017-09-01

    Fluidized bed drying are very well known to yield high heat and mass transfer and hence adopted to many industrial drying processes particularly agricultural products. In this paper, recent advances in fluidized bed drying were reviewed and focus is given to the drying related to the usage of Computational Fluid Dynamics (CFD). It can be seen that usage of modern computational tools such as CFD helps to optimize the fluidized bed dryer design and operation for lower energy consumption and thus better thermal efficiency. Among agricultural products that were reviewed in this paper were oil palm frond, wheat grains, olive pomace, coconut, pepper corn and millet.

  9. Cold vacuum drying facility design requirements

    Energy Technology Data Exchange (ETDEWEB)

    IRWIN, J.J.

    1999-07-01

    This document provides the detailed design requirements for the Spent Nuclear Fuel Project Cold Vacuum Drying Facility. Process, safety, and quality assurance requirements and interfaces are specified.

  10. Drying watery wheat grains by far infrared

    International Nuclear Information System (INIS)

    Suda, K.; Murata, K.; Hara, M.

    2004-01-01

    Summary A far infrared dryer was experimented to dry wheat grains for high performance and cost reduction. It is more efficient than a circulating dryer reducing drying time by 20% and fuel consumption by 20 - 30%. Whereas it takes more time and more fuel, when the drying rate is set at 1%/h. Moreover, on condition that the average drying rate is lower, it could decrease the rate of green wheat grains up to 3%. But green wheat grains did not disappear at all on the condition

  11. Archivo del Duelo

    OpenAIRE

    Ferrera, Tamara

    2010-01-01

    Photos taken from the Archive of Mourning following the March 11 terrorist attacks El Archivo del Duelo. Creación de un archivo etnográfico de los Atentados del 11 de marzo en Madrid. Ministerio de Educación y Ciencia HUM2005-03490.

  12. Displasias del seno

    Directory of Open Access Journals (Sweden)

    Ernesto Andrade Valderrama

    1971-04-01

    Full Text Available En general, las Displasias no se presentan antes de la iniciación del estímulo Gonadal y tienden a desaparecer con el climaterio. Se definen entonces como las afecciones benignas del Seno, de origen endocrino.

  13. COMPARISON BETWEEN WOOD DRYING DEFECT SCORES: SPECIMEN TESTING X ANALYSIS OF KILN-DRIED BOARDS

    Directory of Open Access Journals (Sweden)

    Djeison Cesar Batista

    2015-04-01

    Full Text Available It is important to develop drying technologies for Eucalyptus grandis lumber, which is one of the most planted species of this genus in Brazil and plays an important role as raw material for the wood industry. The general aim of this work was to assess the conventional kiln drying of juvenile wood of three clones of Eucalyptus grandis. The specific aims were to compare the behavior between: i drying defects indicated by tests with wood specimens and conventional kiln-dried boards; and ii physical properties and the drying quality. Five 11-year-old trees of each clone were felled, and only flatsawn boards of the first log were used. Basic density and total shrinkage were determined, and the drying test with wood specimens at 100 °C was carried out. Kiln drying of boards was performed, and initial and final moisture content, moisture gradient in thickness, drying stresses and drying defects were assessed. The defect scoring method was used to verify the behavior between the defects detected by specimen testing and the defects detected in kiln-dried boards. As main results, the drying schedule was too severe for the wood, resulting in a high level of boards with defects. The behavior between the defects in the drying test with specimens and the defects of kiln-dried boards was different, there was no correspondence, according to the defect scoring method.

  14. A freeze dried kit formulation for the preparation of {sup 99m} Tc labelled human polyclonal IgG for the detection of infection and inflammation; Desarrollo del nucleo equipo {sup 99m} Tc-IgG humana para la deteccion `In vivo` de procesos inflamatorios

    Energy Technology Data Exchange (ETDEWEB)

    Pedraza L, M

    1996-11-01

    A freeze dried kit formulation for the preparation of {sup 99m}Tc-labelled human polyclonal IgG for the detection of infection and inflammation employing direct methods for protein labeling was developed. The method comprises reduction of intrinsic disulphide bridges within the antibody molecule by the use of the reductant 2-mercaptoethanol. Following a subsequent purification, the resulting reduced antibody is labeled via Sn{sup 2+} reduction of pertechnetate in the presence of a weak competing ligand ethane-1-hydroxy-1,1-diphosphonate (EHDP). High labeling efficiencies (>90%) were obtained with high in vitro stability and without effect upon antibody immunoreactivity. Methods of analysis were also established permitting identification of radiochemical impurities which may be present in radiopharmaceutical solution. {sup 99m} Tc-polyclonal IgG prepared by the kit method was evaluated for scintigraphic localization of inflammatory lesions and abscesses in rabbits. Data demonstrated that the {sup 99m} Tc-polyclonal IgG after kit-reconstitution shows excellent stability and is an effective imaging agent of infection and/or inflammation. (Author).

  15. Raman mapping of mannitol/lysozyme particles produced via spray drying and single droplet drying

    DEFF Research Database (Denmark)

    Pekka Pajander, Jari; Matero, Sanni Elina; Sloth, Jakob

    2015-01-01

    PURPOSE: This study aimed to investigate the effect of a model protein on the solid state of a commonly used bulk agent in spray-dried formulations. METHODS: A series of lysozyme/mannitol formulations were spray-dried using a lab-scale spray dryer. Further, the surface temperature of drying droplet....../particles was monitored using the DRYING KINETICS ANALYZER™ (DKA) with controllable drying conditions mimicking the spray-drying process to estimate the drying kinetics of the lysozyme/mannitol formulations. The mannitol polymorphism and the spatial distribution of lysozyme in the particles were examined using X......-ray powder diffractometry (XRPD) and Raman microscopy. Partial Least Squares Discriminant Analysis was used for analyzing the Raman microscopy data. RESULTS: XRPD results indicated that a mixture of β-mannitol and α-mannitol was produced in the spray-drying process which was supported by the Raman analysis...

  16. Landfill covers for dry environments

    International Nuclear Information System (INIS)

    Dwyer, S.F.

    1996-01-01

    A large-scale landfill cover field test is currently underway at Sandia National Laboratories in Albuquerque, New Mexico. It is intended to compare and document the performance of alternative landfill cover technologies of various costs and complexities for interim stabilization and/or final closure of landfills in arid and semi-arid environments. Test plots of traditional designs recommended by the US Environmental Protection Agency for both RCRA Subtitle open-quote C close-quote and open-quote D close-quote regulated facilities have been constructed side-by-side with the alternative covers and will serve as baselines for comparison to these alternative covers. The alternative covers were designed specifically for dry environments. The covers will be tested under both ambient and stressed conditions. All covers have been instrumented to measure water balance variables and soil temperature. An on-site weather station records all pertinent climatological data. A key to acceptance of an alternative environmental technology is seeking regulatory acceptance and eventual permitting. The lack of acceptance by regulatory agencies is a significant barrier to development and implementation of innovative cover technologies. Much of the effort on this demonstration has been toward gaining regulatory and public acceptance

  17. Single droplet drying for optimal spray drying of enzymes and probiotics

    OpenAIRE

    Schutyser, M.A.I.; Perdana, J.A.; Boom, R.M.

    2012-01-01

    Spray drying is a mild and cost-effective convective drying method. It can be applied to stabilise heat sensitive ingredients, such as enzymes and probiotic bacteria, albeit in industrial practice for example freeze drying or freezing are often preferred. The reason is that optimum drying conditions and tailored matrix formulations are required to avoid severe heat damage leading to loss in enzyme activity or reduced survival of bacteria. An overview is provided on the use of protective carbo...

  18. La crisi del diritto del lavoro

    Directory of Open Access Journals (Sweden)

    Alessandro Garilli

    2012-01-01

    Full Text Available Riassunto - L’Autore ripercorre in chiave critica l’evoluzione delle politiche legislative in materia di lavoro, alla luce dell’attuale fase di crisi economico finanziaria. Nell’esaminare i principali interventi normativi attuati da inizio secolo, l’Autore mette in evidenza le scelte di metodo e gli elementi di continuità che accomunano i vari provvedimenti, individuandoli nell’affannosa ricerca del punto di equilibrio tra flessibilità e garantismo. La riflessione si chiude con alcuni interrogativi sulle ultime linee di riforma del mercato del lavoro e con l’auspicio che, anche al cospetto delle imprescindibili ragioni dell’economia, il diritto del lavoro possa continuare a svolgere il proprio tradizionale ruolo di disciplina di tutela della persona.   Abstract - The author analyzes, with a critically oriented approach, the development of the employment law, in the light of the current economic and financial crisis. In examining the main regulatory measures implemented since the beginning of the century, the author highlights the methodological choices and the elements of continuity that unite the various measures, focusing them in a hard research of a point of balance between flexibility and security. The discussion concludes with some questions about the last lines of the reform of the labor market and with the hope that, even in the face of compelling reasons of economy, labor law can continue to play its traditional role of governing the protection of person.

  19. OBJETIVO DEL DESARROLLO DEL MILENIO 7

    Directory of Open Access Journals (Sweden)

    Margarita M. Pérez O.

    2013-10-01

    Full Text Available Los Objetivos de Desarrollo del Milenio, también conocidos como los Objetivos del Milenio, constituyeron las metas finales que aprobaron los dirigentes mundiales, 189 jefes de estado y de gobierno en la Cumbre del Milenio de las Naciones Unidas celebrada en Nueva York en el año 2000, en la cual los Estados miembros de la organización reafirmaron su compromiso de luchar por un mundo en el que el desarrollo sostenible y la eliminación de la pobreza tuvieran máxima prioridad1 . En la cumbre se definió la Declaración del Milenio, la cual detalla los objetivos, principios, valores, metas y acciones para erradicar la pobreza Mundial hacia el año 2015, todos ellos ratificados con alto interés y acción estratégica de carácter global, como marco para la medición de los progresos en materia de desarrollo.

  20. Elementos del sistema electoral del Congreso Mexicano

    Directory of Open Access Journals (Sweden)

    Aldo Medina García

    2013-08-01

    Full Text Available El presente artículo es un estudio de los componentes del sistema electoral, diseñado por el legislador mexicano para integrar al parlamento federal. Estudio desarrollado a sabiendas de la importancia que reviste el sistema electoral como un medio que permite a los ciudadanos convertir su voto expresado en las urnas en escaños a favor de determinado candidato o partido. En dicho análisis tomamos en cuenta la evolución constitucional del sistema electoral mexicano, la participación de las fuerzas minoritarias en la integración del Senado y de la Cámara de Diputados, la división que se hace del territorio en circunscripciones electorales, la barrera electoral que se fija a los partidos políticos para acceder a la representación en el Parlamento, la fórmula de asignación que se aplica a la votación obtenida, para finalmente concluir que el sistema electoral mexicano es esencialmente mayoritario aun cuando se vista de proporcional.

  1. Energetic performance analysis of drying agricultural products ...

    African Journals Online (AJOL)

    Renewable energy sources such as solar energy for drying purposes in a more effective and efficient way is inevitable for preservation of agricultural products in developing nations with inadequate access to electricity. This study investigates the effects of using a solar tracking device on the energy performance of drying ...

  2. OSCILLATING MODE OF TOPINAMBUR TUBERS DRYING

    Directory of Open Access Journals (Sweden)

    A. V. Golubkivich

    2015-01-01

    Full Text Available Specifics of a chemical composition of tubers and green material of a topinambur (Helianthus tuberosus, high efficiency and ecological plasticity, profitability of growing, biotechnological potential of use enable to identify a topinambur as a of high-energy cultures of the future. High moisture of various topinambur parts, features of the mechanism of a heat and mass transfer set a problem of search of the new drying methods promoting to increase dehydration efficiency and produce a quality product. A method of calculation of duration of the oscillating mode of topinambur tubers drying in a dense layer is worked out. The topinambur tubers cut on cubes with the side of 6 mm were taken as object of researches. Researches were conducted in the setting of various drying modes: two experiences at the oscillating mode with height of a material layer of 0.07 m and 0.17 m; and also as a check experiment was material drying at a constant temperature of the drying agent. Duration of the oscillating mode of topinambur tubers drying was calculated on their basis of received curves of changes of moisture content at various modes of drying. Estimate indicators were confirmed with experimental data. Results of determination of duration of the oscillating modes of topinambur tubers drying proved that efficiency of the oscillating modes is 18 percent higher, than at control experiment.

  3. Assembly and method for drying a product

    NARCIS (Netherlands)

    Boxtel, van A.J.B.; Bartels, P.V.; Djaeni, M.; Sanders, J.P.M.; Straten, van G.

    2008-01-01

    The application relates to an assembly for drying a product, comprising at least on drying device and at least one adsorption device, in which the adsorption device is provided with regenerable adsorption material for extracting water from a gas and comprises a gas inlet and a gas outlet, and is

  4. Drying characteristics and engineering properties of fermented ...

    African Journals Online (AJOL)

    STORAGESEVER

    2009-03-06

    Mar 6, 2009 ... fermented ground cassava. J. T. Nwabanne ... The drying characteristics of fermented ground local variety of ... effect of variety on the drying and engineering properties of fermented .... Figure 2 shows that the bulk density of each cultivar ... very close thermal conductivities as depicted in the shape of Figure ...

  5. 7 CFR 58.220 - Drying systems.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Drying systems. 58.220 Section 58.220 Agriculture....220 Drying systems. (a) Spray dryers. Spray dryers shall be of a continuous discharge type and all... filter system shall comply with the applicable requirements of the 3-A Accepted Practices for Milk and...

  6. Design of dry sand soil stratified sampler

    Science.gov (United States)

    Li, Erkang; Chen, Wei; Feng, Xiao; Liao, Hongbo; Liang, Xiaodong

    2018-04-01

    This paper presents a design of a stratified sampler for dry sand soil, which can be used for stratified sampling of loose sand under certain conditions. Our group designed the mechanical structure of a portable, single - person, dry sandy soil stratified sampler. We have set up a mathematical model for the sampler. It lays the foundation for further development of design research.

  7. Cold vacuum drying facility 90% design review

    International Nuclear Information System (INIS)

    O'Neill, C.T.

    1997-01-01

    This document contains review comment records for the CVDF 90% design review. Spent fuels retrieved from the K Basins will be dried at the CVDF. It has also been recommended that the Multi-Conister Overpacks be welded, inspected, and repaired at the CVD Facility before transport to dry storage

  8. Dry Port Development: A Systematic Review

    Directory of Open Access Journals (Sweden)

    Fatimazahra BENTALEB

    2015-12-01

    Full Text Available Studies on dry ports as nodes in multimodal transport have been expanded to decrease the mounting congestion on seaports. The principal objective of this study is to inspect how dry port researches have been conducted from different perspective. This paper tries to recap the existing researches that aimed to study dry port concept via a systematic review, to present a general overview of the researches on our relevant region and propose a classification for these researches. This paper present a systematic review of dry port that looks to illustrate the progress of researches on this area between 1986 and 2015, collecting researches on dry port concept and analyzing the main characteristics of the dry port development and their contribution to the multimodal transport. The results indicated that most dry port studies considerate the strategic level and concentrate in the Asian continent. Studies regarding other decision levels and continents have to be developed in further researches. Although the existing studies make a contribution in dry port concept, they allow gaps in terms of operational and tactical decision levels considering their limited geographical region.

  9. Cold vacuum drying facility 90% design review

    Energy Technology Data Exchange (ETDEWEB)

    O`Neill, C.T.

    1997-05-02

    This document contains review comment records for the CVDF 90% design review. Spent fuels retrieved from the K Basins will be dried at the CVDF. It has also been recommended that the Multi-Conister Overpacks be welded, inspected, and repaired at the CVD Facility before transport to dry storage.

  10. Dry deposition of particles to ocean surfaces

    NARCIS (Netherlands)

    Larsen, S.E.; Edson, J.B.; Hummelshoj, P.; Jensen, N.O.; Leeuw, G. de; Mestayer, P.G.

    1995-01-01

    Dry deposition of atmospheric particles mainly depends on wind speed and particle diameter. The dry deposition velocity, Vd, is found to vary by a factor of 100-1,000 with diameter in a likely diameter range, adding uncertainty to deposition estimates, because the diameter distribution for many

  11. Novel dry forests in southwestern Puerto Rico

    Science.gov (United States)

    Sandra Molina Colón; Ariel E. Lugo; Olga Ramos

    2011-01-01

    We report results of new research on (1) community composition of novel subtropical dry forests developing on abandoned pastures and agricultural fields in both private and protected public lands and (2) seed germination and growth rates of plantings of native tree species on degraded soils. We found that novel dry forests were dominated by introduced species, which...

  12. The influence of lysozyme on mannitol polymorphism in freeze-dried and spray-dried formulations depends on the selection of the drying process

    DEFF Research Database (Denmark)

    Grohganz, Holger; Lee, Yan-Ying; Rantanen, Jukka

    2013-01-01

    Freeze-drying and spray-drying are often applied drying techniques for biopharmaceutical formulations. The formation of different solid forms upon drying is often dependent on the complex interplay between excipient selection and process parameters. The purpose of this study was to investigate...... the influence of the chosen drying method on the solid state form. Mannitol-lysozyme solutions of 20mg/mL, with the amount of lysozyme varying between 2.5% and 50% (w/w) of total solid content, were freeze-dried and spray-dried, respectively. The resulting solid state of mannitol was analysed by near......-dried formulations an increase in protein concentration resulted in a shift from ß-mannitol to a-mannitol. An increase in final drying temperature of the freeze-drying process towards the temperature of the spray-drying process did not lead to significant changes. It can thus be concluded that it is the drying...

  13. Microwave and hot air drying of garlic puree: drying kinetics and quality characteristics

    Science.gov (United States)

    İlter, Işıl; Akyıl, Saniye; Devseren, Esra; Okut, Dilara; Koç, Mehmet; Kaymak Ertekin, Figen

    2018-02-01

    In this study, the effect of hot air and microwave drying on drying kinetics and some quality characteristics such as water activity, color, optic index and volatile oil of garlic puree was investigated. Optic index representing browning of the garlic puree increased excessively with an increase in microwave power and hot air drying temperature. However, volatile oil content of the dried samples was decreased by increasing of temperature and microwave power. By increasing drying temperature (50, 60 and 70 °C) and microwave power (180, 360 and 540 W), the drying time decreased from 8.5 h to 4 min. In order to determine the kinetic parameters, the experimental drying data were fitted to various semi-empirical models beside 2nd Fick's diffusion equation. Among them, the Page model gave a better fit for microwave-drying, while Logarithmic model gave a better fit for hot air drying. By increasing the microwave power and hot air drying temperature, the effective moisture diffusivity, De values ranged from 0.76×10-8 to 2.85×10-8 m2/s and from 2.21×10-10 to 3.07×10-10 m2/s, respectively. The activation energy was calculated as 20.90 kJ/mol for hot air drying and 21.96 W/g for microwave drying using an Arrhenius type equation.

  14. Desorption isotherms, drying characteristics and qualities of glace tropical fruits undergoing forced convection solar drying

    Energy Technology Data Exchange (ETDEWEB)

    Jamradloedluk, Jindaporn; Wiriyaumpaiwong, Songchai [Mahasarakham Univ. Khamriang, Kantarawichai, Mahasarakham (Thailand)

    2008-07-01

    Solar energy, a form of sustainable energy, has a great potential for a wide variety of applications because it is abundant and accessible, especially for countries located in the tropical region. Drying process is one of the prominent techniques for utilization of solar energy. This research work proposes a forced convection solar drying of osmotically pretreated fruits viz. mango, guava, and pineapple. The fruit cubes with a dimension of 1cm x 1cm x 1cm were immersed in 35% w./w. sucrose solution prior to the drying process. Drying kinetics, color and hardness of the final products obtained from solar drying were investigated and compared with those obtained from open air-sun drying. Desorption isotherms of the osmosed fruits were also examined and five mathematical models were used to fit the desorption curves. Experimental results revealed that solar drying provided higher drying rate than natural sun drying. Color of glace fruit processed by solar drying was more intense, indicated by lower value of lightness and higher value of yellowness, than that processed by sun drying. Hardness of the products dehydrated by both drying methods, however, was not significantly different (p>0.05). Validation of the mathematical models developed showed that the GAB model was most effective for describing desorption isotherms of osmotically pretreated mango and pineapple whereas Peleg's model was most effective for describing desorption isotherms of osmotically pretreated guava. (orig.)

  15. Drying kinetics and quality aspects during heat pump drying of onion (Allium cepa L.

    Directory of Open Access Journals (Sweden)

    Nihar Ranjan Sahoo

    2012-10-01

    Full Text Available Normal 0 false false false MicrosoftInternetExplorer4 A prototype heat pump dryer has been developed for drying of fruits and vegetables at low temperature and relative humidity to maintain the quality of dried product. Onions, of Nasik red variety were peeled, trimmed and sliced to 2 mm thickness. The onion slices were dried in the heat pump dryer at 35ºC (32 % R.H., 40ºC (26 % R.H., 45ºC (19 % R.H. and 50ºC (15 % R.H.. Samples were also dried in a hot air dryer at 50ºC (52 % R.H. for comparison. The drying rate increased with increase in drying air temperature, associated with reduced R.H., in the heat pump dryer. Drying took place mainly under the falling rate period. The Page equation, resulting in a higher coefficient of determination and lower root mean square error, better described the thin-layer drying of onion slices than the Henderson and Pabis equation. Heat pump drying took less drying time of 360 min and yielded better quality dried product, with higher retention of ascorbic acid and pyruvic acid and lower colour change, as compared to a hot air dryer at the same drying air temperature of 50ºC.

  16. Effect of surface roughness on drying speed of drying lamellas in ...

    African Journals Online (AJOL)

    Lamellas, which are defined as top layers of multilayer parquet and favourable to wood veneer can be dried in jet ventilated automatic veneer roller dryer due to short drying period. The objective of this study is to determine the effect of surface roughness on the drying speed of the veneer roller dryer. Quercus spp.

  17. Scleral lens use in dry eye syndrome.

    Science.gov (United States)

    Bavinger, J Clay; DeLoss, Karen; Mian, Shahzad I

    2015-07-01

    Dry eye syndrome can be difficult to manage in severe or refractory cases. In patients in whom traditional treatments have limited efficacy, alternative treatments may be considered for dry eye syndrome, including scleral lenses. The present review summarizes the evidence regarding scleral lens use in dry eye syndrome. Scleral lenses have become a viable option for severe dry eye syndrome, and have been shown to be efficacious and well tolerated, with most reports citing improved visual acuity and relief of symptoms. Currently, there are 18 manufacturers of scleral lenses, although published reports on scleral lenses primarily focus on the BostonSight PROSE and the Jupiter Lens. Scleral lenses are efficacious and well tolerated for use in severe dry eye syndrome. Further research is needed to compare different sizes and types of lenses, and to standardize outcome measures.

  18. Vacuum drying plant for evaporator concentrates

    International Nuclear Information System (INIS)

    Benavides, E.

    2001-01-01

    Volume reduction systems applied to evaporator concentrates in PWR and BWR save a significant amount of drums. The concentration to dry product is a technique that reaches the maximum volume reduction, compared to conventional techniques (cementation, polymerisation). Four Spanish N.P.P. (3 PWR and 1 BWR) have selected ENSA's process by means of fixed ''in drum vacuum drying system''. A 130-litre steel drum is used for drying without any additional requirement except vacuum resistance. This steel drum is introduced into a standard 200-litre drum. Five centimeters concrete shielding cylinder exists between both drums. Final package is classified as 19 GO according to ENRESA's acceptance code (dry waste with 5 cm concrete between 130-l and 200-l drum). The generation of cemented waste in five N.P.P. versus dried waste will be reduced 83%. This reduction will save a considerable amount in disposal costs. (authors)

  19. A drying coefficient for building materials

    DEFF Research Database (Denmark)

    Scheffler, Gregor Albrecht; Plagge, Rudolf

    2009-01-01

    coefficient is defined which can be determined based on measured drying data. The correlation of this coefficient with the water absorption and the vapour diffusion coefficient is analyzed and its additional information content is critically challenged. As result, a drying coefficient has been derived......The drying experiment is an important element of the hygrothermal characterisation of building materials. Contrary to other moisture transport experiments as the vapour diffusion and the water absorption test, it is until now not possible to derive a simple coefficient for the drying. However......, in many cases such a coefficient would be highly appreciated, e.g. in interaction of industry and research or for the distinction and selection of suitable building materials throughout design and practise. This article first highlights the importance of drying experiments for hygrothermal...

  20. The prospects for dry fuel storage

    International Nuclear Information System (INIS)

    Harris, G.G.; Elliott, D.

    1994-01-01

    Dry storage of spent nuclear fuels is one method of dealing with radioactive waste. This article reports from a one day seminar on future prospects for dry fuel storage held in November 1993. Dry storage in an inert gas or air environment in vaults or casks, is an alternative to wet storage in water-filled ponds. Both wet and dry storage form part of the Interim Storage option for radioactive waste materials, and form alternatives to reprocessing or direct disposal in a deep repository. It has become clear that a large market for dry fuel storage will exist in the future. It will therefore be necessary to ensure that the various technical, safety, commercial, legislative and political constraints associated with it can be met effectively. (UK)

  1. Spray drying formulation of amorphous solid dispersions.

    Science.gov (United States)

    Singh, Abhishek; Van den Mooter, Guy

    2016-05-01

    Spray drying is a well-established manufacturing technique which can be used to formulate amorphous solid dispersions (ASDs) which is an effective strategy to deliver poorly water soluble drugs (PWSDs). However, the inherently complex nature of the spray drying process coupled with specific characteristics of ASDs makes it an interesting area to explore. Numerous diverse factors interact in an inter-dependent manner to determine the final product properties. This review discusses the basic background of ASDs, various formulation and process variables influencing the critical quality attributes (CQAs) of the ASDs and aspects of downstream processing. Also various aspects of spray drying such as instrumentation, thermodynamics, drying kinetics, particle formation process and scale-up challenges are included. Recent advances in the spray-based drying techniques are mentioned along with some future avenues where major research thrust is needed. Copyright © 2015 Elsevier B.V. All rights reserved.

  2. Relevance of nitrate and nitrite in dry-cured ham and their effects on aroma development

    Directory of Open Access Journals (Sweden)

    Flores, Mónica

    2009-07-01

    Full Text Available Potassium and sodium salts of nitrite (E 249 and E 250 and nitrate (E 251 and E 252 are authorised for use under certain levels in several foodstuffs such as non-heat-treated, cured and dried meat products, other cured meat products, canned meat products and bacon. The key point in the use of nitrate and nitrite as preservatives is to find a balance between ensuring the microbiological safety of the ham and keeping as low as possible the level of nitrosamines in the final product. Nitrites and nitrates are authorised as additives for dry-cured ham in the Directive 2006/52/EC of 5 July 2006 that modifies previous Council Directive 95/2/EC on food additives other than colours and sweeteners. The effect of nitrate and its reduction to nitrite in controlling the lipid oxidation process during the ham ripening is very important for the development of the characteristic cured flavour. The main benefits and drawbacks of the use of nitrites and nitrates in dry-cured ham and how these levels may affect its flavour are discussed in this manuscript.Las sales sódica y potásica del nitrito (E249 y E250 y del nitrato (E251 y E252 están autorizados para su uso en los productos cárnicos, secos, curados y no tratados por el calor, otros productos cárnicos curados, productos cárnicos enlatados y bacon. El punto esencial en el uso de nitrato y nitrito como conservantes consiste en encontrar un balance entre el aseguramiento de la seguridad microbiológica del jamón y mantener el nivel de nitrosaminas tan bajo como sea posible. Los nitratos y nitritos están autorizados como aditivos en el jamón curado según la Directiva Europea 2006/52/EC de 5 de Julio de 2006 que modificaba la previa Directiva Europea 95/2/EC de aditivos alimentarios distintos a los colorantes y edulcorantes. El efecto del nitrato y su reducción a nitrito para controlar la oxidación de los lípidos durante la maduración del jamón es muy importante para el desarrollo del caracter

  3. Semi-Dried Fruits and Vegetables

    Directory of Open Access Journals (Sweden)

    Gamze Uysal Seçkin

    2015-12-01

    Full Text Available Since ancient times, the preservation of fruit and vegetables is an ancient method of drying. Sun drying method has been used more widely. In general, consumer-ready products are dried fruits, while the dried vegetables are the foods subjected to the rehydration processes such as boiling, heating and baking before consumption. In recent years, new products with high eating quality have been attempted to achieve without losing characteristic of raw material. With the improving of food technology, using developed methods (pH reduction with reducing aw, slight heating, preservatives use etc. as protective agent, and using a combination of a low rate as an alternative to traditional food preservation process, products have been obtained without changing original characteristics of food. ‘Semi-dried 'or 'medium moist 'products with little difference between the taste and texture of the product with a damp have gained importance in recent years in terms of consumer preferences. Vegetables or fruits, which have water activity levels between 0.50 and 0.95 and the moisture content of between 26% and 60%, are called 'medium moist fruit or vegetables'. Two different manufacturing process to obtain a semi-dried or intermediate moisture products are applied. First, fully dried fruits and vegetables to be rehydrated with water are brought to the desired level of their moisture content. Second, in the first drying process, when the product moisture content is reduced to the desired level, the drying process is finished. The semi-dried products are preferred by consumers because they have a softer texture in terms of eating quality and like fresh products texture.

  4. Herbs drying using a heat pump dryer

    Energy Technology Data Exchange (ETDEWEB)

    Fatouh, M.; Metwally, M.N.; Helali, A.B.; Shedid, M.H. [Department of Mechanical Power Engineering, Faculty of Engineering at El Mattaria, Helwan University, P.O. Box 11718, Masaken El-Helmia, Cairo (Egypt)

    2006-09-15

    In the present work, a heat pump assisted dryer is designed and constructed to investigate the drying characteristics of various herbs experimentally. R134a is used as a working fluid in the heat pump circuit during the experimental work. Experiments have been conducted on Jew's mallow, spearmint and parsley. The effects of herb size, stem presence, surface load, drying air temperature and air velocity on the drying characteristics of Jew's mallow have been predicted. Experimental results show that a high surface load of 28kg/m{sup 2} yields the smallest drying rate, while the drying air with temperature of 55{sup o}C and velocity of 2.7m/s achieves the largest drying rate. A maximum dryer productivity of about 5.4kg/m{sup 2}h is obtained at the air temperature of 55{sup o}C, air velocity of 2.7m/s and dryer surface load of 28kg/m{sup 2}. It was found that small size herbs without stem need low specific energy consumption and low drying time. Comparison of the drying characteristics of different herbs revealed that parsley requires the lowest specific energy consumption (3684kJ/kg{sub H{sub 2}O}) followed by spearmint (3982kJ/kg{sub H{sub 2}O}) and Jew's mallow (4029kJ/kg{sub H{sub 2}O}). Finally, dryer productivity has been correlated in terms of surface load, drying air velocity and drying air temperature. (author)

  5. Simulation Study on Freeze-drying Characteristics of Mashed Beef

    OpenAIRE

    Tambunan, Armansyah H; Solahudin, M; Rahajeng, Estri

    2000-01-01

    Drying characteristic of a particular product is important in analyzing the appropriateness of the drying method for the product. This is especially important for freeze drying, which is known as the most expensive drying method, asideji-om its good drying quality. The objectives of this experiment are to develop a computer simulation program using a retreating drying-frontmodel for predicting freeze drying characteristics of mashed nteat, especially for the influence of sublimation temperatu...

  6. INDUSTRIAL EVALUATION OF RE-DRY STRATEGY FOR SOFTWOOD LUMBER

    OpenAIRE

    Elustondo, Diego; Avramidis, Stavros

    2005-01-01

    This paper presents an experimental evaluation of the first commercial scale dry-sort-redry (DSRD) strategy for drying of 2x4 Pacific coast hemlock (PCH) lumber. The DSRD strategy is a methodology designed to reduce final moisture content variability in kiln dried lumber by complementing conventional drying with radio frequency vacuum (RFV) drying technology. The strategy′s objective is to avoid producing over-dried lumber in conventional drying by setting the target moisture content to...

  7. Telerobotics for dry size reduction

    International Nuclear Information System (INIS)

    Sturm, A.J. Jr; La Valle, D.R.

    1996-01-01

    Remote handling in nuclear Environmental Management (EM) programs is likely to emphasize small batch sizes in unstructured environments. Most existing robotic solutions are impractical due to cost, complexity, or reliability issues. New processes that are environmentally safe are too demanding for human operators, and require precise motion control making traditional electromechanical, hydraulic, and master/slave manipulators unacceptable. The critical missing element is a method to bridge the gap between manual operation and full automation. Rapid advances in computer technology, coupled with national laboratory research activities, has challenged PaR Systems to develop a new line of telerobotics, exploiting this technology, to enhance EM processes. Telerobotics systems permit the human operator to direct and supervise the operation of a remote robotic mechanism. The typical robotic device responds to human inputs and transfers human motion into robot motion. However, unlike teleoperation, the robotic system not only incorporates local decision making authority but can enhance input devices by; producing motion in multiple coordinate frames (e.g., base, tool, joint), automating repetitive motions, responding to real-time sensory input, and facilitating a virtual collaborative environment. The basic premise is to augment, not replace, the human operator and blend the individual abilities of each system. Humans have superior cognitive and pattern recognitive skills, while the robot is a tireless precise positioning device. To provide insight into why telerobotics is crucial to EM, this paper highlights a proposed telerobotic system for the Dry Size Reduction of contaminated components. Different design concepts, robotic control features, and networking for remote operation needed are discussed. (author)

  8. Hot Dry Rock; Geothermal Energy

    Energy Technology Data Exchange (ETDEWEB)

    None

    1990-01-01

    The commercial utilization of geothermal energy forms the basis of the largest renewable energy industry in the world. More than 5000 Mw of electrical power are currently in production from approximately 210 plants and 10 000 Mw thermal are used in direct use processes. The majority of these systems are located in the well defined geothermal generally associated with crustal plate boundaries or hot spots. The essential requirements of high subsurface temperature with huge volumes of exploitable fluids, coupled to environmental and market factors, limit the choice of suitable sites significantly. The Hot Dry Rock (HDR) concept at any depth originally offered a dream of unlimited expansion for the geothermal industry by relaxing the location constraints by drilling deep enough to reach adequate temperatures. Now, after 20 years intensive work by international teams and expenditures of more than $250 million, it is vital to review the position of HDR in relation to the established geothermal industry. The HDR resource is merely a body of rock at elevated temperatures with insufficient fluids in place to enable the heat to be extracted without the need for injection wells. All of the major field experiments in HDR have shown that the natural fracture systems form the heat transfer surfaces and that it is these fractures that must be for geothermal systems producing from naturally fractured formations provide a basis for directing the forthcoming but, equally, they require accepting significant location constraints on HDR for the time being. This paper presents a model HDR system designed for commercial operations in the UK and uses production data from hydrothermal systems in Japan and the USA to demonstrate the reservoir performance requirements for viable operations. It is shown that these characteristics are not likely to be achieved in host rocks without stimulation processes. However, the long term goal of artificial geothermal systems developed by systematic

  9. Nuevos datos paleontológicos del Pleistoceno en el Valle del Manzanares (Madrid, España: Los micromamíferos del yacimiento del Arenero de Arriaga

    Directory of Open Access Journals (Sweden)

    Sesé, Carmen

    2013-12-01

    Full Text Available The micromammals from the archaeological site of the Arenero de Arriaga from the Manzanares Valley are here described. They are the Soricomorpha: Crocidura sp. and Talpa sp., the Rodentia: Eliomys quercinus quercinus, Apodemus sp., Microtus brecciensis, Microtus arvalis, Microtus duodecimcostatus and Arvicola aff. sapidus, and the Lagomorpha: Oryctolagus cuniculus. The faunal association and the evolutionary state of Microtus brecciensis and Arvicola aff. sapidus, suggest an age of the end of the Middle Pleistocene. It also indicates the existence of different biotopes: riparian, moist and dry meadows, and forest, and a temperate climate similar to the present-day climate of the Meseta.Se describe la asociación de micromamíferos del yacimiento achelense del Arenero de Arriaga del valle del Manzanares constituida por los soricomorfos: Crocidura sp. y Talpa sp., los roedores: Eliomys quercinus quercinus, Apodemus sp., Microtus brecciensis, Microtus arvalis, Microtus duodecimcostatus y Arvicola aff. sapidus, y el lagomorfo: Oryctolagus cuniculus. La asociación faunística y el estadio evolutivo de Microtus brecciensis y Arvicola aff. sapidus, indican una edad del final del Pleistoceno Medio. La asociación de micromamíferos sugiere la existencia de varios biotopos representados: ripícola, praderas húmedas y secas, y bosque, y un clima templado similar al actual de la Meseta.

  10. Castillo del Real. Olocau

    OpenAIRE

    AUÑÓN VALLEJO, JONATAN

    2012-01-01

    El objetivo que se quiere alcanzar con este proyecto es el de realizar un estudio lo más cercano posible del Catillo del Real, de manera que se pueda conocer su origen, su evolución a lo largo de la historia, así como las diferentes técnicas y sistemas constructivos utilizados en su construcción. Auñón Vallejo, J. (2011). Castillo del Real. Olocau. http://hdl.handle.net/10251/14244. Archivo delegado

  11. La Representabilidad del Genocidio

    OpenAIRE

    Cardona González, Lorena

    2012-01-01

    El presente artículo intenta hacer una aproximación histórica y analítica al fenómeno del Genocidio, sus implicaciones sociales y culturales que dieron como resultado la reformulación analítica y conceptual de hechos que hasta entonces superaban el conocimiento y la moral humana. De este modo, se hace un trayecto histórico de la paulatina aparición del asesinato masivo como practica de Estado, enmarcado en las experiencias del genocidio armenio y el alemán. A su vez, se hace una mirada sobre ...

  12. Significado presente del CSIC

    OpenAIRE

    Garrido Gallardo, Miguel Angel

    2000-01-01

    Not available

    Este artículo, elaborado en 1999, ofrece una panorámica de la realidad del Consejo Superior de Investigaciones Científicas en la actualidad. Repasa su organización, su volumen de publicaciones, sus indicadores de productividad, su capacidad de obtener recursos y, en suma, su lugar en el conjunto del sistema español de Ciencia y Tecnología, considerado en sí mismo y en relación con la Universidad. Como conclusión del repaso de datos, se afirma que, aunque la fó...

  13. Tratamiento del pie equino

    OpenAIRE

    Robles, Fernanda

    2012-01-01

    El pie equino varo es una patología frecuente en los pacientes con Encefalopatía crónica no evolutiva (ECNE).Se observó que existe una mayor frecuencia en el sexo masculino. Se realizó un estudio descriptivo, comparativo y secundario, durante el periodo de septiembre del 2006 a septiembre del 2011, con un total de 125 pacientes con Ecne, de los cuales se encontraron 101 con pie equino varo congénito. Objetivo: observar los resultados obtenidos en la rehabilitación del pie equino, en niños de ...

  14. Del Pasadismo al Futurismo

    OpenAIRE

    Agudo-Martínez, M. J.

    2003-01-01

    Uno de los habituales prejuicios a la hora de abordar el análisis del movimiento futurista, al igual que sucede con el constructivismo, es la consideración del contexto político en el que se desarrollaron ambas vanguardias. Sin embargo, y dejando a un lado un enfoque del arte con finalidad política de signo diverso, habría que insistir en el hecho de que posiblemente sean tanto el futurismo italiano como el constructivismo ruso, los movimientos que con mayor entusiasmo se manifestaron, en un ...

  15. Evaluation of alternative drying techniques for the earthworm flour processing

    Directory of Open Access Journals (Sweden)

    Laura Suárez Hernández

    2016-01-01

    Full Text Available Production of earthworm flour includes several steps, among which the most critical is the drying process due to factors such as time and energ y requirements. In addition, the information available about this process is relquite limited. Thus, this work evaluated four drying techniques likely to be implemented by lombricultores: sun drying, oven drying, drying tunnel and microwave assisted drying. Drying kinetics values were obtained for all drying techniques, and specific parameters as the following were evaluated: drying tray material (stainless and ceramic steel for sun drying, microwave power (30 %, 50 % and 80 % and amount of material to be dried (72 and 100 g for microwave assisted drying, temperature (50, 65, 90 and 100 °C for oven drying, and temperature (50 and 63 °C and air speed (2.9 to 3.6 m/s for tunnel drying. It was determined that the most efficient technique is the drying tunnel, because this allows the combination of heat transfer by conduction and convection, and enables controlling the operating parameters. Finally, nutritional analyzes were performed in samples obtained by each drying technique evaluated. The crude protein content for sun drying, microwave assisted drying, oven drying and tunnel drying were 66.36 %, 67.91 %, 60.35 % and 62.33 % respectively, indicating that the drying method and operating parameters do not significantly affect the crude protein content.

  16. [Conversion methods of freshwater snail tissue dry mass and ash free dry mass].

    Science.gov (United States)

    Zhao, Wei-Hua; Wang, Hai-Jun; Wang, Hong-Zhu; Liu, Xue-Qin

    2009-06-01

    Mollusk biomass is usually expressed as wet mass with shell, but this expression fails to represent real biomass due to the high calcium carbonate content in shells. Tissue dry mass and ash free dry mass are relatively close to real biomass. However, the determination process of these two parameters is very complicated, and thus, it is necessary to establish simple and practical conversion methods for these two parameters. A total of six taxa of freshwater snails (Bellamya sp., Alocinma longicornis, Parafossarulus striatulus, Parafossarulus eximius, Semisulcospira cancellata, and Radix sp.) common in the Yangtze Basin were selected to explore the relations of their five shell dimension parameters, dry and wet mass with shells with their tissue dry mass and ash free dry mass. The regressions of the tissue dry mass and ash free dry mass with the five shell dimension parameters were all exponential (y = ax(b)). Among them, shell width and shell length were more precise (the average percentage error between observed and predicted value being 22.0% and 22.5%, respectively) than the other three parameters in the conversion of dry mass. Wet mass with shell could be directly converted to tissue dry mass and ash free dry mass, with an average percentage error of 21.7%. According to the essence of definition and the errors of conversion, ash free dry mass would be the optimum parameter to express snail biomass.

  17. Effect of drying conditions on drying kinetics and quality of aromatic Pandanus amaryllifolius leaves.

    Science.gov (United States)

    Rayaguru, Kalpana; Routray, Winny

    2010-12-01

    Pandanus amaryllifolius is a plant with aromatic leaves, which impart the characteristic flavour of aromatic rice. The quality of aromatic Pandanus leaves dried at low temperature (35 °C) and low RH (27%) in a heat pump dryer was evaluated and compared with those obtained from hot air drying at 45 °C. Thin-layer drying kinetics has been studied for both the conditions. To determine the kinetic parameters, the drying data were fitted to various semi-theoretical models. The goodness of fit was determined using the coefficient of determination, reduced chi square, and root mean square error. Aroma, colour, and overall acceptability determination of fresh and dried leaves were made using sensory evaluation. Drying of leaves took place mainly under the falling-rate period. The Page equation was found to be best among the proposed models to describe the thin-layer drying of Pandanus leaves with higher coefficient of determination. The effective moisture diffusivity values were also determined. The effect of low RH was prominent during the initial drying when the product was moist. The effect of temperature was prominent in the later part of drying, which acted as a driving force for moisture diffusion and hence the total drying time was reduced. Retention of aromatic compound 2-acetyl-1-pyrroline content was more in low temperature dried samples with higher sensory scores.

  18. Evaluation of drying models of apple (var. Ligol) dried in a fluidized bed dryer

    International Nuclear Information System (INIS)

    Kaleta, Agnieszka; Górnicki, Krzysztof; Winiczenko, Radosław; Chojnacka, Aneta

    2013-01-01

    Highlights: ► Three new drying models are formulated. ► The developed models are various modifications of the Page model. ► Nineteen models are used to describe the fluidized bed drying of apple. ► The Page model and formulated model is considered as the most appropriate. - Abstract: Three new drying models were formulated. The developed models are various modifications of the Page model. The models were used to describe the drying behaviour of apple (var. Ligol) dried in a fluidized bed dryer. The suitability of new models to describe the drying characteristics were compared to the accuracy of sixteen models available from the literature. The accuracies of the models were measured using the correlation coefficient (R), root mean square error (RMSE), and reduced chi-square (χ 2 ). Three new developed models described the drying characteristics of apple cubes satisfactorily (R > 0.997). The Page model and one of the empirical models formulated by the authors of this study can be considered as the most appropriate (R > 0.9977, RMSE = 0.0094–0.0167, χ 2 = 0.0001–0.0002). The effect of drying air temperature on the drying models parameters were also determined. The shrinkage of apple cubes during drying was measured to assess the changes in quality of dried apples

  19. Determination of pistachio drying behaviour and conditions in a solar drying system

    Energy Technology Data Exchange (ETDEWEB)

    Midilli, Adnan [Karadeniz Technical Univ., Mechanical Engineering Dept., Trabzon (Turkey)

    2001-07-01

    The main object of this study is to determine the drying behaviour and conditions of shelled and unshelled pistachio samples using both solar assisted and open sun drying. For each drying experiment, 100 g each of unshelled and shelled pistachio were used. The least-squares method was applied to find the drying curve equation of pistachio. During the experiments, shelf temperatures, weight loss of pistachio, moisture content of air, and distribution of solar radiation were measured; and presented depending on the drying time. Also, the mass shrinkage ratios of shelled and unshelled pistachio samples were determined, and the experimental uncertainty ratio was calculated as 15-16.5 per cent based on the experimental results. It was deduced that the shelled and unshelled pistachio samples in the solar assisted forced convection dryer were perfectly dried at temperatures of 50{+-}10degC in the time period of 6 h. Whereas, the samples in the open sun drying were not sufficiently dried at temperatures of 28{+-}4degC in the same time period. Hence, it is suggested that the pistachio samples with approximately 29.0 per cent of moisture are dried in the solar assisted convection dryer at 50{+-}10degC of temperature in the time period of approximately 6 h in order to protect from the negative climatic and environmental effects. However, it is not desirable to dry the pistachio samples in the open sun because of greater drying time, dirt, dust and harmful insects. (Author)

  20. Investigation of near dry EDM compared with wet and dry EDM processes

    International Nuclear Information System (INIS)

    Gholipoor, Ahad; Baseri, Hamid; Shabgard, Mohammad Reza

    2015-01-01

    Material removal rate (MRR), tool wear ratio (TWR) and surface roughness (SR) obtained by near-dry EDM process were compared with wet and dry EDM at three levels of discharge energy in drilling of SPK steel. Surface integrity machined by this process was studied and compared with wet and dry EDM processes, by scanning electron microscopy (SEM). The results showed that at high level of discharge energy, wet EDM has the most MRR, TWR and SR, and dry EDM has the least MRR, TWR and SR, while at low discharge energy levels, near-dry EDM process has the most MRR and the least SR. SEM micrographs showed that the quality of surface obtained by near-dry EDM process is better than others and the machined surfaces by near-dry EDM process have lower micro-cracks and craters, relatively.

  1. Investigation of near dry EDM compared with wet and dry EDM processes

    Energy Technology Data Exchange (ETDEWEB)

    Gholipoor, Ahad [Islamic Azad University of Tabriz, Tabriz (Iran, Islamic Republic of); Baseri, Hamid [Amirkabir University of Technology, Tehran (Iran, Islamic Republic of); Shabgard, Mohammad Reza [University of Tabriz, Tabriz (Iran, Islamic Republic of)

    2015-05-15

    Material removal rate (MRR), tool wear ratio (TWR) and surface roughness (SR) obtained by near-dry EDM process were compared with wet and dry EDM at three levels of discharge energy in drilling of SPK steel. Surface integrity machined by this process was studied and compared with wet and dry EDM processes, by scanning electron microscopy (SEM). The results showed that at high level of discharge energy, wet EDM has the most MRR, TWR and SR, and dry EDM has the least MRR, TWR and SR, while at low discharge energy levels, near-dry EDM process has the most MRR and the least SR. SEM micrographs showed that the quality of surface obtained by near-dry EDM process is better than others and the machined surfaces by near-dry EDM process have lower micro-cracks and craters, relatively.

  2. Quality of dried cauliflower according to the methods and drying parameters

    Directory of Open Access Journals (Sweden)

    Łapczyńska-Kordon Bogusława

    2018-01-01

    Full Text Available The quality of food products is a complex concept. It can be defined in many ways. The common element of most of these definitions is the condition of meeting the requirements of consumers. Quality determines product compliance with the requirements set by the normalized regulations. The paper attempts to determine the optimal method and parameters of cauliflower drying. In addition, a qualitative assessment of the obtained product was made. The results show that the method and parameters of drying significantly affect the quality of the dried cauliflower. Convection drying guarantees higher drought quality with respect to the color of the sample (higher brightness, taste and odor. Of the drying parameters accepted in the experiment, the most positive effect on the tested parameters was recorded using convection drying at a flow rate of 0.2 ms-1 and the least favorable for microwave drying 170 or 210 W.

  3. Radiation processing as a post-harvest quarantine control for raisins, dried figs and dried apricots

    International Nuclear Information System (INIS)

    Cetinkaya, N.; Ozyardimci, B.; Denli, E.; Ic, E.

    2006-01-01

    The commercially packed samples of raisins, dried figs and dried apricots were irradiated using doses in the range of 0.5-1.0 kGy for disinfestation and 0.5-5.0 kGy for sensory analysis with the dose rate ranging from 1.44 to 1.92 kGy/h. Pests on dried fruits were evaluated after 0, 1, 2 and 3 months of storage for irradiated dried figs and 1, 3, 6 and 12 months of storage for raisins and dried apricots. Sensory analysis of dried figs, dried apricots and raisins were carried out after 0, 1, 3, 6 and 12 months of storage. The results indicated that radiation processing at low doses (∼1.0 kGy) is an effective post-harvest treatment and quarantine control for these products with no adverse effects on sensory (marketing) attributes

  4. Radiation processing as a post-harvest quarantine control for raisins, dried figs and dried apricots

    Energy Technology Data Exchange (ETDEWEB)

    Cetinkaya, N. [TAEA, Ankara Nuclear Research Center in Agriculture and Animal Sciences, 06983 Ankara (Turkey)]. E-mail: nurcet@taek.gov.tr; Ozyardimci, B. [TAEA, Ankara Nuclear Research Center in Agriculture and Animal Sciences, 06983 Ankara (Turkey); Denli, E. [TAEA, Ankara Nuclear Research Center in Agriculture and Animal Sciences, 06983 Ankara (Turkey); Ic, E. [TAEA, Ankara Nuclear Research Center in Agriculture and Animal Sciences, 06983 Ankara (Turkey)

    2006-03-15

    The commercially packed samples of raisins, dried figs and dried apricots were irradiated using doses in the range of 0.5-1.0 kGy for disinfestation and 0.5-5.0 kGy for sensory analysis with the dose rate ranging from 1.44 to 1.92 kGy/h. Pests on dried fruits were evaluated after 0, 1, 2 and 3 months of storage for irradiated dried figs and 1, 3, 6 and 12 months of storage for raisins and dried apricots. Sensory analysis of dried figs, dried apricots and raisins were carried out after 0, 1, 3, 6 and 12 months of storage. The results indicated that radiation processing at low doses ({approx}1.0 kGy) is an effective post-harvest treatment and quarantine control for these products with no adverse effects on sensory (marketing) attributes.

  5. Usage of Heat Pump Dryer in Food Drying Process and Apple Drying Application

    Directory of Open Access Journals (Sweden)

    Gökhan Gürlek

    2015-12-01

    Full Text Available In Turkey, drying is achieved natural method by spreading out the material on the ground. In this way, there are many disadvantages like low quality and hygienic problems. The resulting loss of food quality in the dried products may have effect negatively trade potential and economical worth. For preventing the deterioration of the materials different types of drying methods have been developed. Low energy consumption applications are important for drying industry besides high product quality. For this purpose, heat pump dryer is gaining importance day by day in drying applications. In this study, the working principle of the heat pump dryer, heat pump types in the drying process and the heat pump dryer performance criteria will be considered. An example of application will be described using obtained results from apple drying operation that is conducted in the heat pump dryer.

  6. Diquafosol ophthalmic solution for dry eye treatment.

    Science.gov (United States)

    Nakamura, Masatsugu; Imanaka, Takahiro; Sakamoto, Asuka

    2012-07-01

    There has been rapid progress in our understanding of dry eye pathogenesis, as well as the development of improved diagnostic clinical tests. Various types of dry eye treatment drugs have been developed. This review summarizes the basic and clinical research carried out in the development of diquafosol for ophthalmic use. Diquafosol is a dinucleotide, purinoreceptor P2Y(2) receptor agonist. Basic pharmacological studies have shown that it acts on P2Y(2) receptors at the ocular surface, to promote tear and mucin secretion via elevated intracellular Ca(2+) concentrations. Diquafosol also improves tear and mucin secretion in experimental dry eye models. Based on the results of laboratory experiments, the authors conducted a series of clinical studies in patients with dry eye disease. Diquafosol was effective in the treatment of dry eye disease at an optimal dose of 3% six times a day. In comparison to commercially available 0.1% sodium hyaluronate ophthalmic solution, 3% diquafosol ophthalmic solution showed non-inferiority in improving corneal fluorescein staining scores and superiority in improving keratoconjunctival Rose Bengal staining scores. Diquafosol ophthalmic solution has a novel mechanism of action that is characterized by its stimulatory effects on tear and mucin secretion. This drug has the potential to be effective in patients with tear film instability and short break-up time type of dry eye, which are essential factors in dry eye pathogenesis.

  7. Well-plate freeze-drying

    DEFF Research Database (Denmark)

    Trnka, Hjalte; Rantanen, Jukka; Grohganz, Holger

    2015-01-01

    Abstract Context: Freeze-drying in presence of excipients is a common practice to stabilize biomacromolecular formulations. The composition of this formulation is known to affect the quality of the final product. Objective: The aim of this study was to evaluate freeze-drying in well-plates as a h......Abstract Context: Freeze-drying in presence of excipients is a common practice to stabilize biomacromolecular formulations. The composition of this formulation is known to affect the quality of the final product. Objective: The aim of this study was to evaluate freeze-drying in well......-plates as a high throughput platform for formulation screening of freeze-dried products. Methods: Model formulations consisting of mannitol, sucrose and bovine serum albumin were freeze-dried in brass well plates, plastic well plates and vials. Physical properties investigated were solid form, residual moisture......, cake collapse and reconstitution time. Results: Samples freeze-dried in well-plates had an acceptable visual cake appearance. Solid form analysis by high throughput X-ray powder diffraction indicated comparable polymorphic outcome independent of the container. The expected increase in moisture level...

  8. Physical properties of sunflower grains after drying

    Directory of Open Access Journals (Sweden)

    Paulo Carteri Coradi

    2015-12-01

    Full Text Available The knowledge of the physical properties of the grains is important for the optimization of post-harvest operations. This study aimed to evaluate the effects of convective drying with different air temperatures (45, 55, 65 and 75 °C the physical properties of sunflower seeds. The drying sunflower grains was performed in convection oven with forced air. In natural conditions, samples of 5 kg of pellets were used for each repetition drying. During the drying process, the grains samples were weighed periodically until they reach 10% (wet basis, w.b., then were subjected to evaluations of physical properties. According to the results it was observed that the porosity, apparent density, thousand kernel weight to the drag coefficient, roundness, sphericity and width of sunflower seed did not change with increasing temperature drying air. It was concluded that the drying air temperatures of 45 °C and 55 retained the initial physical characteristics of sunflower seeds. The temperature of the drying air of 75 °C had greater influence on changes in volumetric shrinkage of the grains.

  9. XANES analysis of dried and calcined bones

    International Nuclear Information System (INIS)

    Rajendran, Jayapradhi; Gialanella, Stefano; Aswath, Pranesh B.

    2013-01-01

    The structure of dried and calcined bones from chicken, bovine, deer, pig, sheep and chamois was examined using X-ray Absorption Near Edge Structure (XANES) spectroscopy. The oxygen K-edge absorption edge indicates that the surface of dried bone has a larger proportion of carbonate than the interior that is made up of phosphates. The phosphorus L and K edge clearly indicate that pyrophosphates, α-tricalcium phosphate (α-TCP) and hydrogen phosphates of Ca do not exist in either the dried bone or calcined bone and phosphorus exists as either β-tricalcium phosphate (β-TCP) or hydroxyapatite, both in the dried and calcined conditions. The Ca K-edge analysis indicates that β-TCP is the likely form of phosphate in both the dried and calcined conditions. - Highlights: • For the first time bones of five different species of vertebrates have been compared in both the dried and calcined states. • O, P and Ca edges detail the local coordination of these atoms in dried and calcined bone. • O K-edge shows that the surface of bone has more CO 3 while the interior has more PO 4 . • P and Ca edges eliminate the presence of pyrophosphates and confirmed the presence of HA and β-TCP. • The stability of these phosphates on calcination has been examined using XANES

  10. XANES analysis of dried and calcined bones

    Energy Technology Data Exchange (ETDEWEB)

    Rajendran, Jayapradhi [Materials Science and Engineering Department, University of Texas at Arlington (United States); Gialanella, Stefano [Materials Science and Industrial Technology Department, University of Trento (Italy); Aswath, Pranesh B., E-mail: aswath@uta.edu [Materials Science and Engineering Department, University of Texas at Arlington (United States)

    2013-10-15

    The structure of dried and calcined bones from chicken, bovine, deer, pig, sheep and chamois was examined using X-ray Absorption Near Edge Structure (XANES) spectroscopy. The oxygen K-edge absorption edge indicates that the surface of dried bone has a larger proportion of carbonate than the interior that is made up of phosphates. The phosphorus L and K edge clearly indicate that pyrophosphates, α-tricalcium phosphate (α-TCP) and hydrogen phosphates of Ca do not exist in either the dried bone or calcined bone and phosphorus exists as either β-tricalcium phosphate (β-TCP) or hydroxyapatite, both in the dried and calcined conditions. The Ca K-edge analysis indicates that β-TCP is the likely form of phosphate in both the dried and calcined conditions. - Highlights: • For the first time bones of five different species of vertebrates have been compared in both the dried and calcined states. • O, P and Ca edges detail the local coordination of these atoms in dried and calcined bone. • O K-edge shows that the surface of bone has more CO{sub 3} while the interior has more PO{sub 4}. • P and Ca edges eliminate the presence of pyrophosphates and confirmed the presence of HA and β-TCP. • The stability of these phosphates on calcination has been examined using XANES.

  11. Spray drying of bead resins: feasibility tests

    International Nuclear Information System (INIS)

    Gay, R.L.; Grantham, L.F.; Jones, L.J.

    1984-01-01

    Rockwell International has developed a volume reduction system for low-level reactor wastes based on drying the wastes in a heated-air spray dryer. The drying of slurries of sodium sulfate, boric acid, and powdered ion exchange resins was demonstrated in previous tests. The drying of bead ion exchange resins can be especially difficult due to the relatively large size of bead resins (about 500 to 800 microns) and their natural affinity for water. This water becomes part of the pore structure of the resins and normally comprises 50 t 60 wt % of the resin weight. A 76-cm-diameter spray dryer was used for feasibility tests of spray drying of cation and anion bead resins. These resins were fed to the dryer in the as-received form (similar to dewatered resins) and as slurries. A dry, free-flowing product was produced in all the tests. The volume of the spray-dried product was one-half to one-third the volume of the as-received material. An economic analysis was made of the potential cost savings that can be achieved using the Rockwel spray dryer system. In-plant costs, transportation costs, and burial costs of spray-dried resins were compared to similar costs for disposal of dewatered resins. A typical utility producing 170 m 3 (6,000 ft 3 ) per year of dewatered resins can save $600,000 to $700,000 per year using this volume reduction system

  12. Preferencias del Turista

    Directory of Open Access Journals (Sweden)

    Jose Luis Leiva Olivencia

    2015-01-01

    Full Text Available Actualmente existen aplicaciones orientadas al turismo basadas en realidad aumentada, pero no integran técnicas de recomendación. Este articulo describe RAMCAT (Realidad Aumentada Móvil Contextual Aplicada al Turismo un modelo de guía turística, que recomienda puntos de interés, teniendo en cuenta factores como preferencias personales y atributos contextuales. Se presentan los componentes teóricos de la arquitectura propuesta, así como sus características, destacando la integración de diferentes sistemas de recomendación, que permiten añadir nuevos motores en el futuro. El articulo se centra en describir sus funcionalidades y el modulo correspondiente al sistema de recomendación basado en el perfil del turista. Otra característica importante del sistema propuesto es la retroalimentación del mismo mediante calificaciones del turista y su trazabilidad.

  13. Carta del Editor

    Directory of Open Access Journals (Sweden)

    Luis Eladio Proaño

    2015-01-01

    Full Text Available La millonaria contratación del futbolista David Beckham, un fenómeno del mercado, ha provocado cuestionamientos a los que se busca respuesta. Es tema de análisis el por qué el betseller "Harry Potter" ha causado tanta conmoción en la opinión pública. Respecto al periodista cibernético, se señalan los contornos del presente y atisban las posibilidades del futuro de esta nueva profesión. El tratamiento de los mitos de la prensa, los temores de la Ley mordaza venezolana y la brutalidad de los video juegos e Internet son temas de enorme interés. Se comenta las pocas veces que la prensa reflexiona sobre la comunicación corporal y la anorexia.

  14. Los muertos del Floreanismo

    Directory of Open Access Journals (Sweden)

    Enrique Ayala Mora

    2008-06-01

    Full Text Available El artículo analiza el crimen político durante las primeras décadas de vida de la República del Ecuador. Específicamente centra su estudio en el período dominado por la figura de Juan José Flores, primer presidente del Ecuador. La inestabilidad política, la precariedad de las alianzas entre las élites regionales, la crisis económica generada por las guerras de Independencia, las conspiraciones y la violencia que caracterizaron al período de surgimiento de las repúblicas andinas hicieron del crimen político un “vicio de nacimiento”. El asesinato del general Antonio José de Sucre, la muerte de los miembros de la sociedad El Quiteño Libre, el homicidio de Juan Otamendi, entre otros, hicieron patente esta característica.

  15. Niveles del aprendizaje organizacional

    OpenAIRE

    Garzón Castrillón, Manuel Alfonso

    2005-01-01

    En la propuesta de modelo de aprendizaje organizacional (AO), la segunda variable se denomina niveles del aprendizaje organizacional ; los niveles de aprendizaje que contemplamos para nuestra investigación son: individual, de equipo, organizacional e interorganizacional.

  16. La escritura del Yo

    Directory of Open Access Journals (Sweden)

    Patricio Landaeta Mardones

    2013-11-01

    Full Text Available Si la creación de una imagen fidedigna del mundo fue la condición de la conquista cognitiva y económica de la tierra, las imágenes mediáticas circulan hoy en día a la manera de un montaje que organiza los sujetos como elementos de un territorio. En esta presentación abordaremos el cruce entre estos dos hechos, entre la escritura del mundo y la de los sujetos, a partir de la idea de Fabulación para mostrar otra escritura del mundo y del yo, leyendo textos e imágenes de la Primera buena Corónica y Buen Gobierno de Felipe Guaman Poma de Ayala.

  17. Acidic mammalian chitinase in dry eye conditions.

    Science.gov (United States)

    Musumeci, Maria; Aragona, Pasquale; Bellin, Milena; Maugeri, Francesco; Rania, Laura; Bucolo, Claudio; Musumeci, Salvatore

    2009-07-01

    An acidic mammalian chitinase (AMCase) seems to be implicated in allergic asthma and allergic ocular pathologies. The aim of this work was to investigate the role of AMCase during Sjögren's Syndrome (SS) and Meibomian Gland Dysfunction (MGD) dry eye diseases. Six patients with MGD dry eye (20-58 years, median 40) and six patients with dry eye associated to SS (32-60 years, median 47) were enrolled in this study. AMCase activity was measured in tears and AMCase mRNA expression was evaluated by real-time polymerase chain reaction from RNA extracted from epithelial cells of the conjunctiva. Six healthy adult subjects of the same age (34-44 years, median 39) were also studied as the control group. AMCase activity was significantly increased in patients affected by MGD dry eye (18.54 +/- 1.5 nmol/ml/h) and SS dry eye (8.94 +/- 1.0 nmol/ml/h) respectively, compared to healthy controls (1.6 +/- 0.2 nmol/ml/h). AMCase activity was higher in the tears of subjects with MGD dry eye (P < 0.001). AMCase mRNA was detected in conjunctival epithelial cells and the expression was significantly higher in MGD dry eye than SS dry eye. A significant correlation between AMCase activity in the tears and mRNA in conjunctival epithelial cells was found. AMCase may be an important marker in the pathogenesis of dry eye, suggesting the potential role of AMCase as a therapeutic target in these frequent pathologies.

  18. Consideraciones alrededor del Libro del Almismo, el Libro del Pensar.

    Directory of Open Access Journals (Sweden)

    MartaLucía Tamayo Fernandez

    1999-12-01

    Full Text Available

    La doctora MarthaLucía Tamayo comparte muchas inquietudes alrededor del Libro del Almismo, el Libro del Pensar; de dónde salió ese nombre; de juntar en medicina y en genética a tres escritores como lo son Jorge Luis Borges, Macedonio Fernández y Julio Cortázar. Su conferencia dice así:

    El término almismo fue ideado por Macedonio Fernández porque defendía mucho el ensimismamiento y el pensamiento hacia el interior, mirar hacia adentro; cada uno somos un “sí mismo” que nos hace diferentes aunque al mismo tiempo podemos ser iguales. Todos tenemos esa parte interior que la medicina debe trabajar y que no puede olvidar.

    “El Libro del Almismo, el libro del pensar” nos lleva a replantear y a repensar un poco la medicina que queremos, una medicina vuelta a pensar.

    Quiero contarles la historia de cómo se llegó a este libro y por qué y para qué se sigue trabajando en estos temas: Después de mi internado y de un trabajo un poco triste de rural, volví al Instituto de Genética y a la Universidad Javeriana en donde encontré al doctor Bernal y un espacio que estaba buscando para esa medicina diferente que quería, con un grupo de personas que me permitía no sólo ver la medicina sino ver muchas otras cosas más; había espacio para la literatura, para Mafalda, para hablar de niños, de locos, había incluso tiempo para hablar de medicina dentro del golf, de carros antiguos y de todo eso fui aprendiendo.

    Eso era lo que estaba buscando. Una medicina que diera espacios diferentes, que fuera más humanizada. Rápidamente me ubiqué y me quedé! No me arrepiento en lo absoluto de haberme quedado porque fue, ha sido y sigue siendo, una experiencia enriquecedora, de muchas vivencias importantes. Sabía exactamente dónde estaba y sabía que había que seguir rápido y había que trabajar muchos aspectos de esa medicina que estábamos buscando y de esa genética especial.

    Rápidamente empezamos a trabajar

  19. Actualidad del relativismo cultural

    OpenAIRE

    Sánchez Durá, Nicolás

    2013-01-01

    Este ensayo tiene tres propósitos. En primer lugar, propone examinar las relaciones entre etnocentrismo y relativismo. El etnocentrismo puede tomar tres formas distintas: a saber, la de una universalidad impostada, la del exotismo y la de un particularismo narcisista exacerbado. El relativismo cultural es una postura que asume la inconmensurabilidad de los conceptos y valores que deben ser considerados como válidos dentro de las imágenes del mundo definidas. En segundo lugar, se argumenta que...

  20. Rapid homogenisation and drying of biological materials

    International Nuclear Information System (INIS)

    Donev, I.Y.

    1977-01-01

    In connection with the implementation for detection of trace elements in the pathogenesis of Ischaemic Heart Diseases and for the work of the laboratory a small apparatus for homogenisation and drying biological materials at liquid nitrogen temperature was constructed. For a complete drying 4 to 6 hours are necessary. A laboratory assistant of average qualification can do the work for 13 homogenisates in about 8-9 hours. The capacity of the homogeniser is about 1.5x10 -5 m 3 . Preliminary investigations were carried out for the determination of differences at drying. (T.G.)

  1. Radiation preservation of dry fruits and nuts

    International Nuclear Information System (INIS)

    Jan, M.; Sattar, A.; Ahmad, W.A.; Khan, I.

    1990-06-01

    Present studies were conducted to investigate insect infestation and oxidative changes of packaging materials. Dry fruits and nuts such as apricots, dates raisins, almonds, pinenuts and walnuts were used for these experiments. Insect infestation and other physico-chemical parameters were used for quality evaluation of the stored dry fruits and nuts. The effect of irradiation and polyethylene (PE) thickness on the over all acceptance of dry fruits on their color, texture, taste and flavor were evaluated. Radiation treatment and low temperature independently inhibited insect infestation during storage. (A.B.)

  2. Cold vacuum drying facility site evaluation report

    International Nuclear Information System (INIS)

    Diebel, J.A.

    1996-01-01

    In order to transport Multi-Canister Overpacks to the Canister Storage Building they must first undergo the Cold Vacuum Drying process. This puts the design, construction and start-up of the Cold Vacuum Drying facility on the critical path of the K Basin fuel removal schedule. This schedule is driven by a Tri-Party Agreement (TPA) milestone requiring all of the spent nuclear fuel to be removed from the K Basins by December, 1999. This site evaluation is an integral part of the Cold Vacuum Drying design process and must be completed expeditiously in order to stay on track for meeting the milestone

  3. A mathematical model for DRY-OUT

    International Nuclear Information System (INIS)

    Mariy, A.; Khattab, M.; Olama, H.

    1989-01-01

    In this study a model has been developed for describing the thermal surface conditions at dry out in a vertical channel with uniform heat flux. The use of droplet generation rate and vapor-droplet-wall heat transfer relations together with the dry and wet side energy equations lead to evaluation of the wall surface temperature and heat transfer distributions before and after dry out. Comparison with the previous theoretical and experimental results are presented. The steady state approach developed showed to be in good agreement with the experimental results

  4. 21 CFR 160.185 - Dried egg yolks.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Dried egg yolks. 160.185 Section 160.185 Food and... CONSUMPTION EGGS AND EGG PRODUCTS Requirements for Specific Standardized Eggs and Egg Products § 160.185 Dried egg yolks. (a) Dried egg yolks, dried yolks is the food prepared by drying egg yolks that conform to...

  5. Mechanisms of deterioration of nutrients. [of freeze dried foods

    Science.gov (United States)

    Karel, M.; Flink, J. M.

    1976-01-01

    Methods which produce freeze dried foods of improved quality were examined with emphasis on storage stability. Specific topics discussed include: microstructure of freeze dried systems, investigation of structural changes in freeze dried systems, artificial food matrices, osmotic preconcentration to yield improved quality freeze dried fruits, and storage stability of osmotically preconcentrated freeze dried fruits.

  6. 46 CFR 154.1150 - Distribution of dry chemical.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Distribution of dry chemical. 154.1150 Section 154.1150... Firefighting System: Dry Chemical § 154.1150 Distribution of dry chemical. (a) All locations on the above deck... chemical hand hose lines; or (2) At least one dry chemical hand hose line and one dry chemical monitor. (b...

  7. 7 CFR 58.250 - Dry whole milk.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Dry whole milk. 58.250 Section 58.250 Agriculture... Products Bearing Usda Official Identification § 58.250 Dry whole milk. Dry whole milk in commercial bulk... Grades of Dry Whole Milk. Quality requirements for dry whole milk in consumer packages shall be for U.S...

  8. Effects of drying methods of lamellas used in multilayer parquet ...

    African Journals Online (AJOL)

    Flat sawn green lamellas with 5 and 2 mm thicknesses, which were cut away from Iroko lumber by means of thin cutting frame saw, were dried with 3 different drying methods such as drying in lumber drying kiln, jet ventilated automatic veneer roller dryer and veneer press dryer. Effect of drying temperature on surface ...

  9. el Valle del Cauca

    Directory of Open Access Journals (Sweden)

    Carlos Humberto Ortiz

    2007-01-01

    Full Text Available Este artículo se enfoca en la identi- ficación de aquellos factores estructurales que explican la pérdida de dinamismo económico de largo plazo en Colombia y, en particular, en el Valle del Cauca. Se examina la competitividad del Valle en relación con Colombia y con el resto del mundo. Se cuestiona la insistencia en una estrategia exportadora como dinamizadora del desarrollo económico. Se identifica que una gran parte de la población está excluida de los beneficios del desarrollo económico. Para construir un modelo de desarrollo que incluya a esta población se recomienda recuperar la senda de la industrialización, invertir en el capital humano (educación de alta calidad, salud, salubridad y nutrición, e invertir en infraestructura. La participación del Estado en estas inversiones sociales es necesaria para disminuir la desigualdad y aumentar el crecimiento económico.

  10. Espectroscopia del Cometa Halley

    Science.gov (United States)

    Naranjo, O.; Fuenmayor, F.; Ferrin, L.; Bulka, P.; Mendoza, C.

    1987-05-01

    Se reportan observaciones espectroscópicas del cometa Halley. Los espectros fueron tomados usando el espectrógrafo del telescopio reflector de 1 metro del Observatorio Nacional de Venezuela. Se utilizó óptica azul, con una red de difracción de 600 lineas/min, obteniéndose una dispersión de 74.2 A/mm y una resolución de 2.5 A, en el rango espectral de 3500 a 6500 A. Seis placas fueron tomadas con emulsión IIa-O y dos con IIa-D. Los tiempos de exposición fueron entre 10 y 150 minutos. El cometa se encontraba entre 0.70 y 1.04 UA del Sol, y entre 1.28 y 0.73 UA de la Tierra. Las emisiones más prominentes en el espectro, son las del CN, C2, y C3. Otras emisiones detectadas corresponden a CH, NH2 y Na. Los espectros muestran un fuerte continuo, indicando un contenido significativo de polvo. Se detectó mayor intensidad del contínuo, en la dirección anti solar, lo cual es evidencia de la cola de polvo.

  11. Inventario nacional del uso actual del agua

    OpenAIRE

    Oficina Nacional de Evaluación de Recursos Naturales

    1984-01-01

    Establece como se emplea el agua en el Perú, teniendo en cuenta el tipo de uso, consuntivo y no consuntivo, discriminando según sea el destino: agrícola, pecuario, poblacional,industrial, minero, energético y pesquero, así como su localización geográfica; ello con la finalidad de que sirva de información básica para la planificación del desarrollo.

  12. Gerencia del cuidado-gerencia del servicio

    Directory of Open Access Journals (Sweden)

    Marta Palmet Jiménez

    2016-01-01

    Full Text Available La gerencia de este siglo debe estar plenamente identificada con la administración para planear, organizar, decidir y obtener resultados definidos, evaluados y alcanzados a través de las personas. Para poder gerenciar el cuidado se debe saber administrar. El objetivo de enfermería es cuidar; el objetivo de la gerencia es la conducción de la producción de bienes o servicios en las organizaciones. La gerencia del cuidado implica: motivación, creatividad, responsabilidad y ética por parte del cuidador y de quien cuida, claridad de actitud frente al ser y al qué hacer por parte del cuidador. Se puede concluir que la gerencia (administración, el cuidado (producto de calidad, el servicio (valor intangible, querer servir son un trinomio que deben ir de la mano de manera integrada para el logro de los objetivos propuestos por la organización de salud y de enfermería.

  13. Impingement drying for preparing dried apple pomace flour and its fortification in bakery and meat products.

    Science.gov (United States)

    Jung, Jooyeoun; Cavender, George; Zhao, Yanyun

    2015-09-01

    This study aimed to evaluate impingement drying (ID) as a rapid drying method to dry wet apple pomace (WAP) and to investigate the fortification of dried apple pomace flour (APF) or WAP in bakery and meat products. ID at ~110 °C reduced the moisture content of apple pomace from 80 % (wet basis) to 4.5 % within 3 h, compared with 24 h to 2.2 % using 40 °C forced-air drying and ~60 h to 2.3 % using freeze drying. Furthermore, ID enhanced the extractable phenolic compounds, allowing for a 58 % increase in total phenolic content (TPC) compared with wet pomace, a 110 % and 83 % higher than TPC in forced-air dried and freeze dried samples, respectively. The 15-20 % APF-fortified cookies were found to be ~44-59 % softer, ~30 % more chewy, and ~14 % moister than those of the control. WAP-fortified meat products had significantly higher dietary fiber content (0.7-1.8 % vs. 0.1-0.2 % in control) and radical scavenging activity than that of the control. These results suggest that impingement drying is a fast and effective method for preparing dried APF with highly retained bioactive compounds, and apple pomace fortified products maintained or even had improved quality.

  14. Drying characteristics of zucchini and empirical modeling of its drying process

    Directory of Open Access Journals (Sweden)

    Naciye Kutlu

    2017-10-01

    Full Text Available The aim of the study was to dry zucchini (Cucurbita pepo by two different methods (convective hot-air (CHD and microwave-assisted drying (MWD. The effect of air temperature (60, 70 and 80°C, microwave (MW power (180, 360, 540 W and sample thickness (5 and 10 mm on some drying characteristics of zucchini were investigated. Thirteen mathematical models available in the literature were fitted to the experimental moisture ratio data. The coefficients of the models were determined by non-linear regression analysis. It was determined that the model that fits the moisture ratio data the best varies at different drying conditions. Increasing drying temperature and MW power and reducing sample thickness improved the drying rate and drying time. Drying in microwave has reduced the drying time by 52-64% for zucchini. It was found that the effective moisture diffusivities increased with increasing temperature and MW power. MWD samples had better rehydration ratios compared to ones dried only in tray drier for 5 mm thickness.  

  15. Effects of drying temperature on drying kinetics and eurycomanone content of Eurycoma longifolia roots

    Directory of Open Access Journals (Sweden)

    Hada Masayu, I.,

    2017-08-01

    Full Text Available In this study, the effects of temperature on drying kinetics and eurycomanone content of Eurycoma longifolia roots were investigated to determine the optimum temperature for drying of this herb. The roots were subjected to drying temperatures of 40, 50, 60 and 70°C. The drying kinetics data indicated that the drying rate increased with increase in temperature but decreased with time. The drying process took place in the falling rate period. Three established thin layer drying models include Page, Midili and Logarithmic were employed to describe the drying process. The Midili model was found as the best fitting model in representing the process. The quality of the products was evaluated by comparing the content of its active compound, eurycomanone, quantified using an ultra performance liquid chromatography (UPLC. The fastest drying process was achieved at 70°C, but UPLC results showed that the product suffered at 18% reduction in eurycomanone content as compared to the control. Based on the findings of this work, the optimum drying temperature for E. longifolia roots is 60°C.

  16. Implications of drying temperature and humidity on the drying kinetics of seaweed

    Science.gov (United States)

    Ali, Majid Khan Majahar; Fudholi, Ahmad; Muthuvalu, M. S.; Sulaiman, Jumat; Yasir, Suhaimi Md

    2017-11-01

    A Low Temperature and Humidity Chamber Test tested in the Solar Energy Laboratory, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, Selangor, Malaysia. Experiments are attempted to study the effect of drying air temperature and humidity on the drying kinetics of seaweed Kappaphycus species Striatum besides to develop a model to estimate the drying curves. Simple method using a excel software is used in the analysis of raw data obtained from the drying experiment. The values of the parameters a, n and the constant k for the models are determined using a plot of curve drying models. Three different drying models are compared with experiment data seaweed drying at 30, 40, 50 and 60°C and relative humidity 20, 30 and 40% for seaweed. The higher drying temperatures and low relative humidity effects the moisture content that will be rapidly reduced. The most suitable model is selected to best describe the drying behavior of seaweed. The values of the coefficient of determination (R2), mean bias error (MBE) and root mean square error (RMSE) are used to determine the goodness or the quality of the fit. The Page model is showed a better fit to drying seaweed. The results from this study crucial for solar dryer development on pilot scale in Malaysia.

  17. Estudio del desgaste del flanco de carburos recubiertos y cermet durante el torneado de alta velocidad en seco del acero AISI 1045

    Directory of Open Access Journals (Sweden)

    Hernández-González, L. W.

    2011-06-01

    Full Text Available This work deals with the experimental study of the flank wear evolution of two coating carbide inserts and a cermet insert during the dry finishing turning of AISI 1045 steel with 400, 500 and 600 m/min cutting speeds. The results were analyzed using the variance analysis and lineal regression analysis in order to describe the relationship between the flank wear and machining time, obtaining the adjusted model equation. The investigation demonstrated a significant effect of cutting speed and machining time on the flank wear at high speed machining. The three coating layers insert showed the best performance while the two layers insert had the worst behaviour of the cutting tool wear at high cutting speeds.

    El objetivo de este trabajo es el estudio experimental de la evolución del desgaste del flanco respecto al tiempo de dos insertos de carburo recubiertos y un cermet durante el torneado de acabado en seco del acero AISI 1045 con velocidades de corte de 400, 500 y 600 m/min. Los resultados fueron comparados utilizando el análisis de varianza y el análisis de regresión lineal para describir la relación entre el desgaste del flanco y el tiempo de maquinado, obteniéndose la ecuación del modelo ajustado. La investigación demostró un efecto significativo de la velocidad de corte y del tiempo de maquinado en el desgaste del flanco en el maquinado de alta velocidad. El mejor desempeño se obtuvo para el carburo recubierto con tres capas, mientras que el carburo con dos capas sufrió el mayor desgaste a elevadas velocidades de corte.

  18. Effect of microwave and air drying of parboiled rice on stabilization of rice bran oil

    Directory of Open Access Journals (Sweden)

    Rizk, Laila F.

    1995-06-01

    Full Text Available Two rice varieties, Giza 175 (short grain and Giza 181 (long grain were partDoiled by soaking the grains at room temperature for 20 hours and steaming for 15 min then dried either at room temperature or by microwave. The results indicated that air and microwave drying significantly increased oil extraction in both rice bran varieties. Parboiling followed by air or microwave drying produced a slight change on protein, fiber and ash content of rice bran and reduced the development of free fatty acids (F.F.A. In oil bran. Microwave samples have less F.F.A. content than the corresponding samples air dried. Oils from the cold stored rice bran presented lower F.F.A. than the corresponding oil bran stored at room temperature. The ratio between total unsaturated fatty acids and total saturated ones (Tu/Ts decreased after air and microwave drying. Results also show that air drying increased the ratio of total hydrocarbons and total sterols (Tu/Ts in both varieties while microwave decreased it.

    Dos variedades de arroz, Giza 175 (grano corto y Giza 181 (grano largo se precocieron mediante la puesta en remojo de los granos a temperatura ambiente durante 20 horas y cocimiento al vapor durante 15 minutos, luego se secaron a temperatura ambiente o por microondas. Los resultados indicaron que el secado al aire y en microondas aumentó significativamente la extracción del aceite en ambas variedades de salvado de arroz. El precocido seguido del secado al aire o en microondas produjo un cambio pequeño en el contenido en proteína, fibra y ceniza y redujo el desarrollo de ácidos grasos libres (F.F.A. en el aceite de salvado. Las muestras secadas en microondas tuvieron un menor contenido en F.F.A. que las muestras correspondientes al secado en aire. Aceites de salvado de arroz almacenado en frió presentaron menor F.F.A. que los almacenados a temperatura ambiente. La relación entre ácidos grasos insaturados totales y los saturados totales (Tu/Ts disminuy

  19. Sun drying of residual annatto seed powder

    Directory of Open Access Journals (Sweden)

    Dyego da Costa Santos

    2015-01-01

    Full Text Available Residual annatto seeds are waste from bixin extraction in the food, pharmaceutical and cosmetic industries. Most of this by-product is currently discarded; however, the use of these seeds in human foods through the elaboration of powder added to other commercial powders is seen as a viable option. This study aimed at drying of residual annatto powder, with and without the oil layer derived from the industrial extraction of bixin, fitting different mathematical models to experimental data and calculating the effective moisture diffusivity of the samples. Powder containing oil exhibited the shortest drying time, highest drying rate (≈ 5.0 kg kg-1 min-1 and highest effective diffusivity (6.49 × 10-12 m2 s-1. All mathematical models assessed were a suitable representation of the drying kinetics of powders with and without oil, with R2 above 0.99 and root mean square error values lower than 1.0.

  20. Prevalence of dry eye in diabetics

    Directory of Open Access Journals (Sweden)

    Silviana S Kamel

    2017-01-01

    Diabetic patients are more prone to suffering from dry eye than normal subjects. These abnormalities can result in severe complications. Early examination of the diabetic patients for the detection of the ocular surface disorders is indicated.

  1. Dry cooling towers - the Schmehausen example

    International Nuclear Information System (INIS)

    Weber, P.

    1977-01-01

    In a prototype, there are often problems which require special static, constructive, and assembling measures for their solution. In the case of the Schmehausen dry cooling tower, the demands on the assembling technology are particularly high. (orig.) [de

  2. Extrusion processing : effects on dry canine diets

    NARCIS (Netherlands)

    Tran, Q.D.

    2008-01-01

    Keywords: Extrusion, Canine diet, Protein, Lysine, Starch gelatinization, Palatability, Drying.

    Extrusion cooking is a useful and economical tool for processing animal feed. This high temperature, short time processing technology causes chemical and physical changes that alter the

  3. Decontamination of polypropylene fabrics by dry cleaning

    International Nuclear Information System (INIS)

    Severa, J.; Knajfl, J.

    1983-01-01

    Polypropylene fabrics can efficiently be decontaminated by dry cleaning in benzine or perchloroethylene, this also in case the fabric was greased in addition to radioactive contamination. For heavily soiled fabric, it is advantageous to first dry clean it and then wash it. The positive effect was confirmed of intensifiers on the cleaning process, especially of benzine soap. In practice, its concentration should be selected within 1 and 10 g.dm - 3 . Decontamination by dry cleaning and subsequent washing is advantageous in that that the resulting activity of waste water from the laundry is low. Radioactive wastes from the dry cleaning process have a low weight and can be handled as solid waste. (M.D.)

  4. High strength air-dried aerogels

    Science.gov (United States)

    Coronado, Paul R.; Satcher, Jr., Joe H.

    2012-11-06

    A method for the preparation of high strength air-dried organic aerogels. The method involves the sol-gel polymerization of organic gel precursors, such as resorcinol with formaldehyde (RF) in aqueous solvents with R/C ratios greater than about 1000 and R/F ratios less than about 1:2.1. Using a procedure analogous to the preparation of resorcinol-formaldehyde (RF) aerogels, this approach generates wet gels that can be air dried at ambient temperatures and pressures. The method significantly reduces the time and/or energy required to produce a dried aerogel compared to conventional methods using either supercritical solvent extraction. The air dried gel exhibits typically less than 5% shrinkage.

  5. Solar drying of rose (Rosa sp.) petals

    Energy Technology Data Exchange (ETDEWEB)

    Balladin, D.A.; Headley, Oliver [University of the West Indies, Center for Resource Management and Environmental Studies, St. Michael (Barbados)

    1999-10-01

    The rose (Rosa sp.) petals can be dried after 2 days at about 30degC reaching an equilibrium moisture content after 16 h using the solar wire basket dryer. The initial moisture content (wet wt basis) and final moisture content (dry wt basis), determined by the Dean-Stark toluene were 65.7 and 25.2% respectively. The intensity of the rose red coloured pigment (pelargonidin) decreased by a factor of 2.5 after drying. The pelargonidin ethanoic extract as an acid-base indicator, has a K{sub 4} value of 1 x 10{sup -4} mol 1{sup -1} and pH of end point 4 and imbibed on filter paper and allowed to air dry for 5 min showed excellent properties as acid-based test tapes. (Author)

  6. Cold vacuum drying facility design requirements

    Energy Technology Data Exchange (ETDEWEB)

    Irwin, J.J.

    1997-09-24

    This release of the Design Requirements Document is a complete restructuring and rewrite to the document previously prepared and released for project W-441 to record the design basis for the design of the Cold Vacuum Drying Facility.

  7. Cooking and drying processes optimization of Pentadesma ...

    African Journals Online (AJOL)

    Aghomotsegin

    2015-09-30

    Sep 30, 2015 ... This work determined the optimum conditions of cooking and drying processes. ... Key words: Forest galeries, Pentadesma butyraceae, cosmetic industry, ..... butyracea kernels can lead to the production of butter of.

  8. Cold vacuum drying facility design requirements

    International Nuclear Information System (INIS)

    Irwin, J.J.

    1997-01-01

    This release of the Design Requirements Document is a complete restructuring and rewrite to the document previously prepared and released for project W-441 to record the design basis for the design of the Cold Vacuum Drying Facility

  9. Fuel-Cell Structure Prevents Membrane Drying

    Science.gov (United States)

    Mcelroy, J.

    1986-01-01

    Embossed plates direct flows of reactants and coolant. Membrane-type fuel-cell battery has improved reactant flow and heat removal. Compact, lightweight battery produces high current and power without drying of membranes.

  10. Recent advances in nanostructured biomimetic dry adhesives

    Directory of Open Access Journals (Sweden)

    Andras ePattantyus-Abraham

    2013-12-01

    Full Text Available The relatively large size of the gecko and its ability to climb a multitude of structures with ease has often been cited as the inspiration upon which the field of dry adhesives is based. Since 2010, there have been many advances in the field of dry adhesives with much of the new research focusing on developing nanoscale and hierarchical features in a concentrated effort to develop synthetic gecko-like dry adhesives which are strong, durable and self-cleaning. A brief overview of the geckos and the hairs which it uses to adhere to many different surfaces is provided before delving into the current methods and materials used to fabricate synthetic gecko hairs. A summary of the recently published literature on bio-inspired, nanostructured dry adhesives is presented with an emphasis being placed on fabrication techniques.

  11. Water Reclamation using Spray Drying, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose a new spray drying technology for the recovery and recycle of water while stabilizing the solid wastes or residues as found in advanced life support...

  12. Spray drying of beryllium oxide powder

    International Nuclear Information System (INIS)

    Sepulveda, J.L.; Kahler, D.A.

    1991-01-01

    Forming of beryllia ceramics through dry pressing requires the agglomeration of the powder through spray drying. To produce high quality fired ceramics it is necessary to disperse/grind the primary powder prior to binder addition. Size reduction of the powder is accomplished using an aqueous system in Vibro-Energy mills (VEM) charged with beryllia media to minimize contamination. Two VEM mills of different size were used to characterize the grinding operation. Details of the grinding kinetics are described within the context of the Macroscopic Population Balance Model approach. Spray drying of the ceramic slurry was accomplished with both a centrifugal atomizer and a two fluid nozzle atomizer. Two different spray dryers were used. Important operating parameters affecting the size distribution of the spray dried powder are discussed

  13. Drying of plasterboard - some quality aspects

    Energy Technology Data Exchange (ETDEWEB)

    Naesman, L. (University of Lund (Sweden)); Wimmerstedt, R. (University of Lund (Sweden))

    1993-06-01

    The manufacture process, especially the drying operation, of plasterboard was studied. The purpose was to measure physical properties, which can be used for the optimization of the process with respect to energy and quality. The cardboard was found to be hygroscopic whereas the gypsum was not. It was determined that the chloride content in the gypsum raw material should not exceed 75 ppm. The starch was found to migrate towards the surface of the gypsum core during the drying process (air temperture 140 C, dew-point of air 30 C and air velocity 10 m/s). The drying of different qualitites of plasterboard was also investigated. It was found that the cardboard is a very important parameter whereas the gypsum core has little effect on the drying rate and core temperature. (orig.)

  14. From soaking wet to bone dry

    DEFF Research Database (Denmark)

    Båstrup-Spohr, Lars; Sand-Jensen, Kaj; Nicolajsen, Sascha Veggerby

    2015-01-01

    A hydrological gradient from pond to dry limestone pavements on the Island of Öland, South Sweden. Methods Plant community composition and six morpho-physiogical plant traits were measured along a pronounced gradient in water supply and soil depth. The strength of filtering was quantified using a trait...... and resistance to water loss on drying. For individual traits, the strength of filtering waxes and wanes along the gradient. This strongly suggests that the mechanism, through which species are filtered into communities, acts through different traits as environmental conditions change along the gradient......, and most traits are strongly filtered only in parts of the gradient (e.g. root porosity in wet soils and water loss on drying on thin dry soils). Evidence for congruence between trait dispersion indices and the CATS model was established, underpinning the importance to plant community assembly...

  15. MATHEMATICAL MODELING OF ORANGE SEED DRYING KINETICS

    Directory of Open Access Journals (Sweden)

    Daniele Penteado Rosa

    2015-06-01

    Full Text Available Drying of orange seeds representing waste products from juice processing was studied in the temperatures of 40, 50, 60 and 70 °C and drying velocities of 0.6, 1.0 and 1.4 m/s. Experimental drying kinetics of orange seeds were obtained using a convective air forced dryer. Three thin-layer models: Page model, Lewis model, and the Henderson-Pabis model and the diffusive model were used to predict the drying curves. The Henderson-Pabis and the diffusive models show the best fitting performance and statistical evaluations. Moreover, the temperature dependence on the effective diffusivity followed an Arrhenius relationship, and the activation energies ranging from 16.174 to 16.842 kJ/mol

  16. A drying system for spent fuel assemblies

    International Nuclear Information System (INIS)

    Suikki, M.; Warinowski, M.; Nieminen, J.

    2007-06-01

    The report presents a proposed drying apparatus for spent fuel assemblies. The apparatus is used for removing the moisture left in fuel assemblies during intermediate storage and transport. The apparatus shall be installed in connection with the fuel handling cell of an encapsulation plant. The report presents basic requirements for and implementation of the drying system, calculation of the drying process, operation, service and maintenance of the equipment, as well as a cost estimate. Some aspects of the apparatus design are quite specified, but the actual detailed planning and final selection of components have not been included. The report also describes actions for possible malfunction and fault conditions. An objective of the drying system for fuel assemblies is to remove moisture from the assemblies prior to placing the same in a disposal canister for spent nuclear fuel. Drying is performed as a vacuum drying process for vaporizing and draining the moisture present on the surface of the assemblies. The apparatus comprises two pieces of drying equipment. One of the chambers is equipped to take up Lo1-2 fuel assemblies and the other OL1-2 fuel assemblies. The chambers have an internal space sufficient to accommodate also OL3 fuel assemblies, but this requires replacing the internal chamber structure for laying down the assemblies to be dried. The drying chambers can be closed with hatches facing the fuel handling cell. Water vapour pumped out of the chamber is collected in a controlled manner, first by condensing with a heat exchanger and further by freezing in a cold trap. For reasons of safety, the exhaust air of vacuum pumps is further delivered into the ventilation outlet duct of a controlled area. The adequate drying result is ascertained by a low final pressure of about 100 Pa, as well as by a sufficient holding time. The chamber is built for making its cleaning as easy as possible in the event of a fuel rod breaking during a drying, loading or unloading

  17. Determinantes del ingreso y del gasto corriente de los hogares

    OpenAIRE

    Muñoz C., Manuel

    2004-01-01

    Este ensayo de investigación empírica analiza los determinantes del ingreso y del gasto en los hogares colombianos. Utilizando un modelo del ciclo de vida con datos de la encuesta de hogares de 1994 y 1995, muestra que el comportamiento del ingreso está afectado principalmente por las características demográficas del hogar y los rasgos socio ocupacionales de sus miembros. El comportamiento del gasto está determinado ante todo por el ingreso y, en menor medida, por las características sociales...

  18. Las fluctuaciones del nivel del mar durante el Cuaternario

    OpenAIRE

    Pousa, Jorge Lorenzo; Isla, Federico Ignacio; Schnack, Enrique Jorge

    2002-01-01

    Los cambios del nivel del mar han ejercido una fuerte influencia en la evolución del planeta y en la historia de la humanidad. En una escala de tiempo geológico, las variaciones de los niveles oceánicos han dejado un registro ampliamente distribuido en la forma de depósitos sedimentarios. El descenso del nivel del mar durante la Ultima Glaciación, que alcanzó unos 120 metros hace 18.000 años, permitió la emergencia del estrecho de Bering y la migración humana desde Eurasia hacia América. Se e...

  19. Exergy Steam Drying and Energy Integration

    Energy Technology Data Exchange (ETDEWEB)

    Verma, Prem; Muenter, Claes (Exergy Engineering and Consulting, SE-417 55 Goeteborg (Sweden)). e-mail: verma@exergyse.com

    2008-10-15

    Exergy Steam Drying technology has existed for past 28 years and many new applications have been developed during this period. But during past few years the real benefits have been exploited in connection with bio-fuel production and energy integration. The steam dryer consists of a closed loop system, where the product is conveyed by superheated and pressurised carrier steam. The carrier steam is generated by the water vapours from the product being dried, and is indirectly superheated by another higher temperature energy source such as steam, flue gas, thermal oil etc. Besides the superior heat transfer advantages of using pressurised steam as a drying medium, the energy recovery is efficient and simple as the recovered energy (80-90%) is available in the form of steam. In some applications the product quality is significantly improved. Examples presented in this paper: Bio-Combine for pellets production: Through integration of the Exergy Steam Dryer for wood with a combined heat and power (CHP) plant, together with HP steam turbine, the excess carrier steam can be utilised for district heating and/or electrical power production in a condensing turbine. Bio-ethanol production: Both for first and second generation of ethanol can the Exergy process be integrated for treatment of raw material and by-products. Exergy Steam Dryer can dry the distillers dark grains and solubles (DDGS), wood, bagasse and lignin. Bio-diesel production: Oil containing seeds and fruits can be treated in order to improve both the quality of oil and animal feed protein, thus minimizing further oil processing costs and increasing the sales revenues. Sewage sludge as bio-mass: Municipal sewage sludge can be considered as a renewable bio-fuel. By drying and incineration, the combustion heat value of the sludge is sufficient for the drying process, generation of electrical energy and production of district heat. Keywords; Exergy, bio-fuel, bio-mass, pellets, bio-ethanol, biodiesel, bio

  20. Drought and Winter Drying (Pest Alert)

    Science.gov (United States)

    USDA Forest Service

    Drought and winter drying have periodically caused major damage to trees. Drought reduces the amount of water available in the soil. In the case of winter drying, the water may be in the soil, but freezing of the soil makes the water unavailable to the tree. In both cases, more water is lost through transpiration than is available to the plant. Symptoms of drought and...

  1. Managing Risks in Dry Port Operations

    OpenAIRE

    Ciortescu Cezar-Gabriel; Pãvãla?cu Narcis Sebastian

    2012-01-01

    The purpose of this paper is to have an in-depth look into the phenomenon of risk assessment and risk management strategies in managing dry port operations as an integrated part into international containerized freight trade. The fact that world crises take the form of disruptions, bankruptcies, breakdowns, macroeconomic and political changes, and disasters leads to higher risks and makes risk management more and more difficult. This paper aims to discuss the theory behind the dry port concep...

  2. Abiotic factors influencing tropical dry forests regeneration

    Directory of Open Access Journals (Sweden)

    Ceccon Eliane

    2006-01-01

    Full Text Available Tropical dry forests represent nearly half the tropical forests in the world and are the ecosystems registering the greatest deterioration from the anthropogenic exploitation of the land. This paper presents a review on the dynamics of tropical dry forests regeneration and the main abiotic factors influencing this regeneration, such as seasonal nature, soil fertility and humidity, and natural and anthropic disturbances. The main purpose is to clearly understand an important part of TDF succession dynamics.

  3. Bacterial Killing by Dry Metallic Copper Surfaces▿

    OpenAIRE

    Santo, Christophe Espírito; Lam, Ee Wen; Elowsky, Christian G.; Quaranta, Davide; Domaille, Dylan W.; Chang, Christopher J.; Grass, Gregor

    2010-01-01

    Metallic copper surfaces rapidly and efficiently kill bacteria. Cells exposed to copper surfaces accumulated large amounts of copper ions, and this copper uptake was faster from dry copper than from moist copper. Cells suffered extensive membrane damage within minutes of exposure to dry copper. Further, cells removed from copper showed loss of cell integrity. Acute contact with metallic copper surfaces did not result in increased mutation rates or DNA lesions. These findings are important fir...

  4. A rice husk gasifier for paddy drying

    International Nuclear Information System (INIS)

    Mirani, A.A.; Kalwar, S.A.; Ahmad, M.

    2013-01-01

    Due to energy crisis and constant increase in the price of fossil fuels, the world's trend changes to renewable sources of energy like solar, wind and biomass gasification. Substantial biomass potential is available in Pakistan in the form of agriculture or forest residue (rice straw, rice husk, cotton stalks, corn cobs, wood chips, wood saw, etc.). These can be best utilised for the production of producer gas or synthetic gas that can be used for drying of agricultural crops. The drying process is an important activity of post harvest processing for long-term storage. Rice husk is nowadays commonly used for biomass gasification and its heat content value is about 15MJ/kg. It constitutes about 30 percent of rice production. A rice husk gasifier was developed and evaluated on paddy drying at Japan International Cooperation Agency (JICA), Tsukuba International Center (TBIC), Japan. Rice husk gasifier has following major components; husk feeding system, ash chamber, burner, centrifugal fan, drying chamber, gasifier reactor, air duct and an electric motor of 0.37kW. The average drying plenum air temperature was recorded as 45 degree C during the drying process. The paddy 'IR 28' from initial moisture content of 24% was dried up to 14% moisture content for about 3.33h consuming 3kg/h of rice husk. The efficiency was found to be 58%. The rice husk gasifier can also be used for drying the fruits and vegetables, provided that heat exchanger should be attached with it. The overall performance of rice husk gasifier was satisfactory and will be beneficial for small scale farmers, food processors and millers as well. (author)

  5. Dry cooling systems with plastic surfaces

    International Nuclear Information System (INIS)

    Roma, Carlo; Leonelli, Vincenzo

    1975-01-01

    Research and experiments made on dry cooling systems with plastic surfaces are described. The demonstration program planned in Italy for a 100Gcal/h dry cooling system is exposed, and an installation intended for a large 1300Mwe nuclear power station is described with reference to the assembly (exploitation and maintenance included). The performance and economic data relating to this installation are also exposed [fr

  6. La imagen del pase.

    Directory of Open Access Journals (Sweden)

    Hernando Bernal.

    1999-11-01

    Full Text Available A partir de un texto del poeta Octavio Paz llamado «La imagen», se busca proseguir la equivalencia entre las imágenes de la poesía y la función que ellas tienen para el poeta, y el fantasma fundamental y su función para el analizante que está en el momento del pase. Se parte de la idea de que la poesía busca entrar en el ser así como el psicoanálisis tiene como finalidad apuntar al corazón del ser del sujeto. Se hace entonces una distinción del concepto de «ser» para el psicoanálisis, haciendo alusión también al discurso de la filosofía. Esclarecido el sentido de lo que es el «ser» para el psicoanálisis, se aborda de lleno – entre otras cosas, relacionadas con la experiencia del pase específicamente- la equivalencia entre la definición que hace Octavio Paz de «La Imagen» y el momento del pase en el análisis de un sujeto, imagen que, al igual que el mito para la filosofía, las leyes para la ciencia y el matema para el psicoanálisis, se constituyen en los instrumentos con los que cada una de estas disciplinas horadan en lo real.

  7. Influence of selected washing treatments and drying temperatures ...

    African Journals Online (AJOL)

    Influence of selected washing treatments and drying temperatures on ... with regard to the optimal retention of the crude protein and fat levels of the dried dagaa. ... are accessible to most of the households involved in dried fish processing.

  8. Drying equipment for radioisotope-treated animals

    International Nuclear Information System (INIS)

    Fujikake, Toshio; Ohmori, Akira; Takada, Yukio; Nakano, Shozoh; Tamai, Shinsuke.

    1978-01-01

    The animal experiments using radioisotopes have been carried out over wide fields, accordingly, the number of radioisotope-contaminated animal cadavers has been increasing rapidly. It was decided that each establishment employing radioiosotopes dries those cadavers to such state as to be able to burn up with the device in Japan Atomic Energy Research Institute. The animal waste-drying device meeting the above mentioned purpose was developed by the joint work of Fuji Electric General Devices Co. and Fuji Electric Co. It is known as the micro-wave drying device for animals (its nickname is Microdry). This device dehydrates at high speed by micro-wave drying method. By using along with a moisture detector, it gives the drying state as requested regardless of the water content of each animal. The animal wastes after perfect dehydration are reduced to the weight of about one-third, and the dried animal cadavers can be preserved for a long time at room temperature because of the sterilizing effect of the micro-wave heating. This device is noted for its excellent safeness, simple operation, and low treatment cost. It is anticipated that it can be further applied to other fields such as excreta, breeding materials, etc. (Kobatake, H.)

  9. Templated Dry Printing of Conductive Metal Nanoparticles

    Science.gov (United States)

    Rolfe, David Alexander

    Printed electronics can lower the cost and increase the ubiquity of electrical components such as batteries, sensors, and telemetry systems. Unfortunately, the advance of printed electronics has been held back by the limited minimum resolution, aspect ratio, and feature fidelity of present printing techniques such as gravure, screen printing and inkjet printing. Templated dry printing offers a solution to these problems by patterning nanoparticle inks into templates before drying. This dissertation shows advancements in two varieties of templated dry nanoprinting. The first, advective micromolding in vapor-permeable templates (AMPT) is a microfluidic approach that uses evaporation-driven mold filling to create submicron features with a 1:1 aspect ratio. We will discuss submicron surface acoustic wave (SAW) resonators made through this process, and the refinement process in the template manufacturing process necessary to make these devices. We also present modeling techniques that can be applied to future AMPT templates. We conclude with a modified templated dry printing that improves throughput and isolated feature patterning by transferring dry-templated features with laser ablation. This method utilizes surface energy-defined templates to pattern features via doctor blade coating. Patterned and dried features can be transferred to a polymer substrate with an Nd:YAG MOPA fiber laser, and printed features can be smaller than the laser beam width.

  10. Drying a tuberculosis vaccine without freezing.

    Science.gov (United States)

    Wong, Yun-Ling; Sampson, Samantha; Germishuizen, Willem Andreas; Goonesekera, Sunali; Caponetti, Giovanni; Sadoff, Jerry; Bloom, Barry R; Edwards, David

    2007-02-20

    With the increasing incidence of tuberculosis and drug resistant disease in developing countries due to HIV/AIDS, there is a need for vaccines that are more effective than the present bacillus Calmette-Guérin (BCG) vaccine. We demonstrate that BCG vaccine can be dried without traditional freezing and maintained with remarkable refrigerated and room-temperature stability for months through spray drying. Studies with a model Mycobacterium (Mycobacterium smegmatis) revealed that by removing salts and cryoprotectant (e.g., glycerol) from bacterial suspensions, the significant osmotic pressures that are normally produced on bacterial membranes through droplet drying can be reduced sufficiently to minimize loss of viability on drying by up to 2 orders of magnitude. By placing the bacteria in a matrix of leucine, high-yield, free-flowing, "vial-fillable" powders of bacteria (including M. smegmatis and M. bovis BCG) can be produced. These powders show relatively minor losses of activity after maintenance at 4 degrees C and 25 degrees C up to and beyond 4 months. Comparisons with lyophilized material prepared both with the same formulation and with a commercial formulation reveal that the spray-dried BCG has better overall viability on drying.

  11. Development of Solar Biomass Drying System

    Directory of Open Access Journals (Sweden)

    Atnaw Samson Mekbib

    2017-01-01

    Full Text Available The purpose of this paper focuses on the experimental pre-treatment of biomass in agricultural site using solar energy as power source and contribution of common use and efficiency solar dryer system for consumer. The main purpose of this design for solar cabinet dryer is to dry biomass via direct and indirect heating. Direct heating is the simplest method to dry biomass by exposing the biomass under direct sunlight. The solar cabinet dryer traps solar heat to increase the temperature of the drying chamber. The biomass absorbs the heat and transforms the moisture content within the biomass into water vapour and then leaves the chamber via the exhaust air outlet. This problem however can be solved by adopting indirect solar drying system. High and controllable temperatures can be achieved as a fan is used to move the air through the solar collector. This project has successfully created a solar cabinet dryer that combines both direct and indirect solar drying systems and functions to dry biomass as well as crops effectively and efficiently with minimal maintenance. Hence, it is indeed a substitution for conventional dryers which are affordable to local farmers.

  12. Heavy metals in atmospheric surrogate dry deposition

    Science.gov (United States)

    Morselli; Cecchini; Grandi; Iannuccilli; Barilli; Olivieri

    1999-02-01

    This paper describes a methodological approach for the assessment of the amount of surrogate dry deposition of several toxic heavy metals (Cd, Cr, Cu, Ni, Pb, V, Zn) associated with atmospheric particulate matter at ground level. The objectives of the study were twofold: i) the evaluation of several techniques for the digestion of dry deposition samples for trace metal analysis; ii) the comparison of the results from two samplers with different collecting surfaces. A dry solid surface sampler (DRY sampler, Andersen--USA) and a water layer surface sampler (DAS sampler--MTX Italy) were employed. The samples were collected over a one-year period in an urban site of Bologna (northern Italy). A description is given of the complete procedure, from sampling to data elaboration, including sample storage, digestion and analytical methods. According to the results obtained with three different digestion techniques (Teflon bomb, microwave digester and Teflon flask with vapour cooling system), the highest recovery rate was achieved by the Teflon bomb procedure employing an NBS 1648 Standard Reference Material; 90-95% of the elements considered were recovered by dissolution in a pressurized Teflon bomb with an HNO3-HF mixture. Given these results, the technique was adopted for dry deposition sample digestion. On the basis of the amount of heavy metals measured as monthly deposition fluxes (microg/m2), the collecting efficiency of the DAS sampler for a number of elements was found to be as much as two to three times greater than that of the DRY sampler.

  13. Nano spray drying for encapsulation of pharmaceuticals.

    Science.gov (United States)

    Arpagaus, Cordin; Collenberg, Andreas; Rütti, David; Assadpour, Elham; Jafari, Seid Mahdi

    2018-05-17

    Many pharmaceuticals such as pills, capsules, or tablets are prepared in a dried and powdered form. In this field, spray drying plays a critical role to convert liquid pharmaceutical formulations into powders. In addition, in many cases it is necessary to encapsulate bioactive drugs into wall materials to protect them against harsh process and environmental conditions, as well as to deliver the drug to the right place and at the correct time within the body. Thus, spray drying is a common process used for encapsulation of pharmaceuticals. In view of the rapid progress of nanoencapsulation techniques in pharmaceutics, nano spray drying is used to improve drug formulation and delivery. The nano spray dryer developed in the recent years provides ultrafine powders at nanoscale and high product yields. In this paper, after explaining the concept of nano spray drying and understanding the key elements of the equipment, the influence of the process parameters on the final powders properties, like particle size, morphology, encapsulation efficiency, drug loading and release, will be discussed. Then, numerous application examples are reviewed for nano spray drying and encapsulation of various drugs in the early stages of product development along with a brief overview of the obtained results and characterization techniques. Copyright © 2018 Elsevier B.V. All rights reserved.

  14. Characteristics of a Dry Fog Ionizer

    International Nuclear Information System (INIS)

    Murata, Y; Kudo, Y; Yonezawa, M

    2008-01-01

    The newly developed 'Dry Fog Ionizer' generates charged dry fog. The dry fog consists of very fine water droplets 8μm in mean diameter. This system consists of a dry fog nozzle (H.Ikeuchi and Co., LTD.), a ring electrode for induction charging (50mm outside diameter, and 10mm thick) in front of the nozzle, and a fan for dissipating charged dry fog. The ring electrode is DC or AC-biased and fine droplets ejected from the nozzle are electrified by induction charging. The particle size of the charged water droplets are reduced through evaporation during the transporting process by air flow, and completely evaporate approximately 2m from the nozzle under normal atmospheric conditions (25 deg. C, 60%R.H.) leaving high density ions. Using this system, high density ionic space charge can be realized in a remote spot from the ionizer. By this principle, the Dry Fog Ionizer shows strong charge-eliminating ability in the region away from the ionizer. When a dc bias of 5kV was applied to a ring electrode with the rate of water flow from the nozzle being 21/h, an ionic space-charge density of 1200nC /m 3 was able to be obtained at a distance 2m away from the ionizer, which was 10 2 times the value produced by an ordinary corona-type ionizer with an air blower.

  15. Drying of Agricultural Products Using Long Wave Infrared Radiation(Part 2). Drying of Welsh Onion

    International Nuclear Information System (INIS)

    Itoh, K.; Han, C.S.

    1995-01-01

    The investigation was carried out to clarify the intermittent drying characteristics for welsh onion use of long-wave infrared radiation. When compared with two other methods: use of air and vacuum freezing, this method showed significantly high rate of drying. The experiments were carried out analyzing the influence of different lengths of the welsh onion, different rate of radiation and different temperature of the airflow. The obtained results were as follows: 1. The rate of drying increases as the length of welsh onion decrease and the rate of radiation increase. 2. The airflow, temperature does not influence to the rate of drying. 3. The increasing of the drying time considerably aggravate the quality the dried welsh onion

  16. Designing CAF-adjuvanted dry powder vaccines: Spray drying preserves the adjuvant activity of CAF01

    DEFF Research Database (Denmark)

    Ingvarsson, Pall Thor; Schmidt, Signe Tandrup; Christensen, Dennis

    2013-01-01

    spray drying. The optimal excipient to stabilize CAF01 during spray drying and for the design of nanocomposite microparticles was identified among mannitol, lactose and trehalose. Trehalose and lactose were promising stabilizers with respect to preserving liposome size, as compared to mannitol...... parameters suggested that a fast drying rate is essential to avoid phase separation and lipid accumulation at the surface of the microparticles during spray drying. Finally, immunization studies in mice with CAF01 in combination with the tuberculosis antigen Ag85B-ESAT6-Rv2660c (H56) demonstrated that spray...... drying of CAF01 with trehalose under optimal processing conditions resulted in the preservation of the adjuvant activity in vivo. These data demonstrate the importance of liposome stabilization via optimization of formulation and processing conditions in the engineering of dry powder liposome...

  17. Hibiscus sabdariffa L extract drying with different carrier agent: Drying rate evaluation and color analysis

    Science.gov (United States)

    Djaeni, M.; Utari, F. D.; Kumoro, A. C.

    2017-03-01

    The aim of this study was to investigate the effect of different carrier agents on roselle or Hibiscus sabdariffa L.extract drying. Carrier agent was used for reducing stickiness of material and avoiding agglomeration as well as improving stability. The method consisted of two steps involving roselle extraction and drying process. The liquid roselle extract was mixed with carrier agent (maltodextrin-arabic gum) in various composition. The mixture was then dried at different air temperature ranging 40 - 80°C. As a response, moisture content in the extract was observed by gravimetry every 10 minutes during90 minutes. The procedurewas repeated for the drying without carrieragent. The result showed that constant rate of drying with carrier agent was higher up to l.7 times than that of without carrier agent. Based on the color analysis,roselle extract drying with carrier agent also showed reasonable quality.

  18. Investigation Of Infrared Drying Behaviour Of Spinach Leaves Using ANN Methodology And Dried Product Quality

    Directory of Open Access Journals (Sweden)

    Sarimeseli Ayse

    2015-12-01

    Full Text Available Effects of infrared power output and sample mass on drying behaviour, colour parameters, ascorbic acid degradation, rehydration characteristics and some sensory scores of spinach leaves were investigated. Within both of the range of the infrared power outputs, 300–500 W, and sample amounts, 15–60 g, moisture content of the leaves was reduced from 6.0 to 0.1±(0.01 kg water/kg dry base value. It was recorded that drying times of the spinach leaves varied between 3.5–10 min for constant sample amount, and 4–16.5 min for constant power output. Experimental drying data obtained were successfully investigated by using artificial neural network methodology. Some changes were recorded in the quality parameters of the dried leaves, and acceptable sensory scores for the dried leaves were observed in all of the experimental conditions.

  19. Method and apparatus for in-situ drying investigation and optimization of slurry drying methodology

    Science.gov (United States)

    Armstrong, Beth L.; Daniel, Claus; Howe, Jane Y.; Kiggans, Jr, James O.; Sabau, Adrian S.; Wood, III, David L.; Kalnaus, Sergiy

    2016-05-10

    A method of drying casted slurries that includes calculating drying conditions from an experimental model for a cast slurry and forming a cast film. An infrared heating probe is positioned on one side of the casted slurry and a thermal probe is positioned on an opposing side of the casted slurry. The infrared heating probe may control the temperature of the casted slurry during drying. The casted slurry may be observed with an optical microscope, while applying the drying conditions from the experimental model. Observing the casted slurry includes detecting the incidence of micro-structural changes in the casted slurry during drying to determine if the drying conditions from the experimental model are optimal.

  20. The influence of the dried blood spot drying time on the recoveries of six immunosuppressants

    Directory of Open Access Journals (Sweden)

    Remco A. Koster

    2015-10-01

    Full Text Available Investigation of the drying time of dried blood spots (DBS is currently not included in DBS validations. The influence of the DBS drying time on the recovery of tacrolimus, ascomycin, sirolimus, everolimus, cyclosporin A and temsirolimus was evaluated by measuring DBS with a fixed blood volume at a hematocrit range between 0.1 and 0.6 L/L at 3, 24 and 48 hours of drying time. Results showed that the recovery of sirolimus, everolimus, temsirolimus and cyclosporin A was influenced by the DBS drying time, while the recovery of tacrolimus and ascomycin was not. A drying time of at least 24 hours is advised in order to stabilize hematocrit and concentration related recovery effects of sirolimus, everolimus, temsirolimus and cyclosporin A.

  1. Evaluation of dried salted pork ham and neck quality

    Directory of Open Access Journals (Sweden)

    Simona Kunová

    2015-12-01

    Full Text Available The aim of the present study was analysed chemical and physical parameters of dried salted pork ham and neck. Dry-cured meat is a traditional dry-cured product obtained after 12 - 24 months of ripening under controlled environmental conditions.  Ham and neck was salted by nitrite salt mixture during 1 week. Salted meat products were dried at 4 °C and relative humidity 85% 1 week after salting. The quality of dry-cured meat is influenced by the processing technology, for example length of drying and ripening period. The average moisture of dried salted pork ham was 63.77% and dried salted pork neck was 59.26%. The protein content was 24.87% in dried salted pork ham and significantly lower (20.51% in dried salted pork neck. The value of intramuscular fat in dried salted pork ham was 4.97% and 14.40% in dried salted pork neck. The salt content was 5.39% in dried salted pork ham and 4.83% in dried salted pork neck. The cholesterol content was 1.36 g.kg-1 in dried salted pork ham and significant lower in dried salted pork neck (0.60 g.kg-1. The value of lightness was 44.36 CIE L* in dried salted pork ham and significantly lower in dried salted pork neck (40.74 CIE L*. The pH value was 5.84 in dried salted pork ham and 5.80 in dried salted pork neck. The shear work was 9.99 kg.s-1 in dried salted pork ham and 6.34 in dried salted pork neck. The value of water activity (aw was 0.929 in dried salted pork ham and similar 0.921 in dried salted pork neck. 

  2. del Estado Aragua

    Directory of Open Access Journals (Sweden)

    Joselys Cintia Zerpa

    2008-01-01

    Full Text Available Diagnostica la situación actual de los bienes que conforman al patrimonio histórico-cultural del Municipio Zamora, Estado Aragua, Venezuela. La Investigación es descriptiva y de campo, comprendió la elaboración de un inventario de los bienes inmuebles, festividades religiosas y manifestaciones artesanales del municipio. Se estudiaron la condición física y uso actual de estos bienes y los planes y proyectos existentes. Analizó el marco normativo que los rige. Se obtuvo la opinión de los representantes de organismos públicos relacionados con la actividad turística del Municipio, de los visitantes, cronistas e historiadores. Aportes: La mayoría de los bienes se encuentran en buen estado de conservación, Las manifestaciones culturales, festividades y la artesanía se desarrollan periódicamente pero no son aprovechadas turísticamente, Se determinó que existe un marco normativo para tales bienes y No existen propuestas actuales referentes a estos bienes. Se reflejó el interés de los sectores institucional y privado para la incorporación de estos bienes a la oferta turística del Municipio y del Estado

  3. APOSTILLAS ACERCA DEL POSTRABAJO

    Directory of Open Access Journals (Sweden)

    Arturo Torrecilla

    2000-01-01

    Full Text Available El más reciente debate en torno al postrabajo transforma la herencia de los dos ciclos que le precedieron desde los años setenta. El primero se correspondía con la crítica de la división social y técnica de labores informada por una filosofía de la alienación o bien por una rectificación de la arquitectónica marxista pero salvaguardando la promesa laborista del buen trabajo. El segundo ciclo hacía eco del rechazo a las cadenas de montaje fordistas y se abría al horizonte de la abolición del trabajo salarial, manteniendo sin embargo el abolengo del sujeto unitario de la historia. La presente escena asume una densidad mayor, producto del encuentro entre las nuevas tecnologías informacionales, las discusiones en el ámbito de la sociología y la antropología, de la tecnología y la ciencia, junto al dueto que inaugura el posmodernismo.

  4. Apostillas acerca del postrabajo

    Directory of Open Access Journals (Sweden)

    Arturo Torrecilla

    2000-04-01

    Full Text Available El más reciente debate en torno al postrabajo transforma la herencia de los dos ciclos que le precedieron desde los años setenta. El primero se correspondía con la crítica de la división social y técnica de labores informada por una filosofía de la alienación o bien por una rectificación de la arquitectónica marxista pero salvaguardando la promesa laborista del buen trabajo. El segundo ciclo hacía eco del rechazo a las cadenas de montaje fordistas y se abría al horizonte de la abolición del trabajo salarial, manteniendo sin embargo el abolengo del sujeto unitario de la historia. La presente escena asume una densidad mayor, producto del encuentro entre las nuevas tecnologías informacionales, las discusiones en el ámbito de la sociología y la antropología, de la tecnología y la ciencia, junto al dueto que inaugura el posmodernismo.

  5. La universidad del futuro

    Directory of Open Access Journals (Sweden)

    FERNANDO SANCÉN CONTRERAS

    2013-01-01

    Full Text Available El trabajo señala la necesidad de reconstruir la Universidad, dado el dinamismo que muestra la ciencia y la sociedad, pues trae consigo cambios sustanciales en la visión del mundo y en el aumento del poder del hombre sobre la naturaleza. Se analizan los supuestos epistemológicos de la universidad tradicional y se propone una nueva explicación del conocimiento humano, enfatizando el conocimiento científico. Postula una docencia fundada en las propiedades de la ciencia, cuyo método inductivo basado en los paradigmas vigentes: analítico, crítico, pragmático, ofrece una herramienta para la docencia, la investigación y la difusión de la cultura. Se propone una educación centrada en el sujeto que se hace a sí mismo (etopoiética y que insiste en el proceso de auto-creación del individuo y de la sociedad.

  6. Significado presente del CSIC

    Directory of Open Access Journals (Sweden)

    Garrido Gallardo, Miguel Angel

    2000-05-01

    Full Text Available Not available

    Este artículo, elaborado en 1999, ofrece una panorámica de la realidad del Consejo Superior de Investigaciones Científicas en la actualidad. Repasa su organización, su volumen de publicaciones, sus indicadores de productividad, su capacidad de obtener recursos y, en suma, su lugar en el conjunto del sistema español de Ciencia y Tecnología, considerado en sí mismo y en relación con la Universidad. Como conclusión del repaso de datos, se afirma que, aunque la fórmula del CSIC, como organismo nacional e interdisciplinario, no es la única posible, la organización del Estado de las Autonomías, así como la evaluación de los datos con que se cuenta, la hacen vivamente recomendable. No hay, pues, sino que seguir con su desarrollo.

  7. Dalt del tren

    Directory of Open Access Journals (Sweden)

    Jaume Subirana

    2001-11-01

    Full Text Available Ens consta que la saviesa popular hi toca més del que a aquest temps d’enquestes, telèfons mòbils i targetes de crèdit li ve de gust admetre, per això em fa gràcia, en veure la pausada però continuada intrusió de la cultura catalana a Internet, recordar les cançons de quan era petit: “Dalt del tren, tots anem-hi dalt del tren, hi ha lloc per tota la gent”, dèiem, i “El tren pinxo de Banyoles és el més bonic que hi ha, ple de llaunes i cassoles i barrets de capellà”. I resulta que per una vegada a la vida hem pujat, efectivament, dalt del tren que passava per l’estació de Catalunya i en cinc anys hem passat de gairebé res a prou pàgines amb un contingut, a més, apreciable i, sobretot, a un petit teixit de persones i institucions que han entès la importància de la revolució comunicativa que Internet representa i que hi teixeixen i projecten webs amb el convenciment dels conversos.

  8. Las carreras del futuro

    Directory of Open Access Journals (Sweden)

    Luis Piscoya Hermoza

    2011-07-01

    Full Text Available La primera década del siglo XXI ha estado signada por un énfasis en los estudiosde prospectiva, los mismos que, a partir de procesos de complejizacióny articulación de la sociedad planetaria como son la digitalización, el progresivodeterioro del medio ambiente, la necesidad del cambio de la matriz energéticay la globalización del mercado, han ensayado hipótesis para identificar lastendencias que se fortalecerán y profundizarán durante las próximas décadas.Desde el punto de vista metodológico, existen muchas maneras de clasificarlaspara conceptualizarlas y entenderlas mejor. Sin embargo, considerando lanaturaleza de esta edición nos proponemos enfocar directamente aquellas queestán estrechamente ligadas a la formación universitaria.Naturalmente, no pensamos que estamos ante tendencias inevitables en lamedida que epistemológicamente la creencia en leyes históricas deterministases insostenible y la práctica social nos muestra que la construcción del futuroes nuestra responsabilidad y siempre rebasa las mejores previsiones.

  9. Drying characteristics and nitrogen loss of biogas digestate during drying process

    Energy Technology Data Exchange (ETDEWEB)

    Maurer, C.; Muller, J. [Hohenheim Univ., Stuttgart (Germany). Inst. of Agricultural Engineering, Tropical and Subtropical Group

    2010-07-01

    The cost of transporting biogas digestate can be decreased by reducing its water content. However, the digestate emits volatile compounds during drying. This study investigated the drying behaviour and the change of digestate composition. Drying took place in a hybrid solar/waste-heat dryer that used solar energy as well as waste heat from a combined heat and power unit (CHP) and the exhaust air of a microturbine. The experiment involved the use of 60 t of liquid digestate. Climatic conditions were measured inside and outside the drying hall. Dry matter (DM) and organic dry matter (ODM) were also measured on a daily basis. In addition, the energy consumption of waste and solar heat were recorded and related to the quantity of dried feedstock. The total nitrogen, ammonium, phosphate, potassium oxide, magnesium oxide and calcium oxide in the digestate were subjected to chemical analysis before and after the drying process. Losses of nitrogen were calculated. Specific energy consumption depended on the climatic condition. Most of the energy consumption was covered by the waste heat of the CHP. A considerable amount of nitrogen was lost during the drying process.

  10. Effect of drying conditions on drying kinetics and quality of aromatic Pandanus amaryllifolius leaves

    OpenAIRE

    Rayaguru, Kalpana; Routray, Winny

    2010-01-01

    Pandanus amaryllifolius is a plant with aromatic leaves, which impart the characteristic flavour of aromatic rice. The quality of aromatic Pandanus leaves dried at low temperature (35 °C) and low RH (27%) in a heat pump dryer was evaluated and compared with those obtained from hot air drying at 45 °C. Thin-layer drying kinetics has been studied for both the conditions. To determine the kinetic parameters, the drying data were fitted to various semi-theoretical models. The goodness of fit was ...

  11. COMPARISON BETWEEN WOOD DRYING DEFECT SCORES: SPECIMEN TESTING X ANALYSIS OF KILN-DRIED BOARDS

    OpenAIRE

    Djeison Cesar Batista; Márcio Pereira da Rocha; Ricardo Jorge Klitzke

    2015-01-01

    It is important to develop drying technologies for Eucalyptus grandis lumber, which is one of the most planted species of this genus in Brazil and plays an important role as raw material for the wood industry. The general aim of this work was to assess the conventional kiln drying of juvenile wood of three clones of Eucalyptus grandis. The specific aims were to compare the behavior between: i) drying defects indicated by tests with wood specimens and conventional kiln-dried boards; and ii) ph...

  12. Raman mapping of mannitol/lysozyme particles produced via spray drying and single droplet drying.

    Science.gov (United States)

    Pajander, Jari Pekka; Matero, Sanni; Sloth, Jakob; Wan, Feng; Rantanen, Jukka; Yang, Mingshi

    2015-06-01

    This study aimed to investigate the effect of a model protein on the solid state of a commonly used bulk agent in spray-dried formulations. A series of lysozyme/mannitol formulations were spray-dried using a lab-scale spray dryer. Further, the surface temperature of drying droplet/particles was monitored using the DRYING KINETICS ANALYZER™ (DKA) with controllable drying conditions mimicking the spray-drying process to estimate the drying kinetics of the lysozyme/mannitol formulations. The mannitol polymorphism and the spatial distribution of lysozyme in the particles were examined using X-ray powder diffractometry (XRPD) and Raman microscopy. Partial Least Squares Discriminant Analysis was used for analyzing the Raman microscopy data. XRPD results indicated that a mixture of β-mannitol and α-mannitol was produced in the spray-drying process which was supported by the Raman analysis, whereas Raman analysis indicated that a mixture of α-mannitol and δ-mannitol was detected in the single particles from DKA. In addition Raman mapping indicated that the presence of lysozyme seemed to favor the appearance of α-mannitol in the particles from DKA evidenced by close proximity of lysozyme and mannitol in the particles. It suggested that the presence of lysozyme tend to induce metastable solid state forms upon the drying process.

  13. Variability and trends in dry day frequency and dry event length in the southwestern United States

    Science.gov (United States)

    McCabe, Gregory J.; Legates, David R.; Lins, Harry F.

    2010-01-01

    Daily precipitation from 22 National Weather Service first-order weather stations in the southwestern United States for water years 1951 through 2006 are used to examine variability and trends in the frequency of dry days and dry event length. Dry events with minimum thresholds of 10 and 20 consecutive days of precipitation with less than 2.54 mm are analyzed. For water years and cool seasons (October through March), most sites indicate negative trends in dry event length (i.e., dry event durations are becoming shorter). For the warm season (April through September), most sites also indicate negative trends; however, more sites indicate positive trends in dry event length for the warm season than for water years or cool seasons. The larger number of sites indicating positive trends in dry event length during the warm season is due to a series of dry warm seasons near the end of the 20th century and the beginning of the 21st century. Overall, a large portion of the variability in dry event length is attributable to variability of the El Niño–Southern Oscillation, especially for water years and cool seasons. Our results are consistent with analyses of trends in discharge for sites in the southwestern United States, an increased frequency in El Niño events, and positive trends in precipitation in the southwestern United States.

  14. Dry mass estimation of tropical aquatic insects using different short-term preservation methods

    Directory of Open Access Journals (Sweden)

    Claudia Cressa

    1999-06-01

    Full Text Available Relationships of body mass and head capsule width were calculated for Thraulodes sp., Haplohyphes sp. (Ephemeroptera, Leptonema sp. and Nectopsyche sp. (Trichoptera, and Anacroneuria sp. (Plecoptera using different preservatives (Freezing, Formaldehyde 4% and Kahle. The organisms were collected monthly during a year on the Orituco river, Venezuela with a Surber net (0. 1296 m² and 0.286 mm mesh size. The data presented here are representative of the organism conditions year around. No attempt was made to quantify intersample variation. Regression analysis indicated that all relationships were highly correlated for any of the fixatives used. Changes in dry mass per unit change of head capsule width, vary among species and preservatives with no clear relationship among them. Changes in dry mass calculated as the difference between dry mass of preserved samples to those of unpreserved ones, indicate that all fixatives underestimate dry mass by as much as 85.4%, except for Nectopsyche sp. whose dry mass was always overestimated. These results provide further evidence on the effect of preservatives on dry mass losses. Even when working with tropical species, any study in which biomass is going to be determined should consider the effect of preservatives on dry mass.Se calcularon las ecuaciones para las relaciones entre la masa del cuerpo y el ancho de la cápsula cefálica para Thraulodes sp., Haplohyphes sp. (Ephemeroptera, Leptonema sp., Nectopsyche sp. (Trichoptera y Anacroneuria sp. (Plecoptera usando diferentes preservativos (Congelamiento, Formol 4% and Kahle. El análisis de regresión indicó que todas las relaciones obtenidas son altamente significativas para cada uno de los preservativos utilizados. Los cambios en la masa del cuerpo por unidad de cambio en el ancho de la cápsula cefálica, son diferentes para cada especie y preservativo, sin haberse obtenido una clara relación entre ellos. La compararación entre los valores de masa

  15. DRUM DRYER FOR DRYING THE PARTICULATE PRODUCTS

    Directory of Open Access Journals (Sweden)

    I. S. Iurova

    2014-01-01

    Full Text Available Summary. For raise effectiveness drying process drum-type installation in which drum the mechanism of creation of various zones providing a necessary temperature and hydrodynamic regime of process of drying in process of product passage on a drum and changes in it of a relationship of various forms of communication of a moisture, and also a process intensification at last stage of drying by creation разряжения in a continuous technological stream of drying is provided is offered. The drum provides formation of a zone of separation of heat-transfer agent by means of the dissector, zones of intensive drying by disposing lobate nozzles in chessboard order with a dividing ring, zones of separation of the completed heat-transfer agent from жома as a result of separator installation in which the elliptic disk having cuts on a straight line from edge to the centre places, with formation of the triangular slot for passage dried pulp and heat-transfer agent, and also zones the final drying by performance of a section of a drum matching to a zone perforated on which length are had spring-loaded lobate nozzles representing the blades connected bow-shaped rod with metal plates, had with outer side of a drum and under the form repeating its contour, thus the bow-shaped rod from the interior of a drum which ends are supplied by springs rest against overhead and bottom persistent screw nuts, and blades and metal plates are installed with possibility of twirl concerning a fastening place on a drum and supplied by reinforcing ribs.

  16. [Psychosomatic aspects of dry eye syndrome].

    Science.gov (United States)

    Nepp, J

    2016-02-01

    Patients with dry eye syndrome are known to suffer from anxiety and depression. Analysis of psychological disorders in therapy-resistant dry eye syndrome. A retrospective analysis of the training for interactive psychiatric screening (TRIPS) questionnaire from 110 patients with therapy-resistant dry eye syndrome was carried out. The results of the questionnaire allow the diagnosis of psychological disorders and vegetative disorders. Patients were divided into groups with anxiety, depression, mixed diagnoses, vegetative disorders and no diagnosis. A sicca score was used for assessment of dryness comprising the Schirmer test, measurement of tear meniscus, break up time, lipid layer thickness, the use of fluorescein and rose bengal staining tests and the subjective visual analogue scale. The diagnosis of dry eye syndrome was compared with the psychological disorders of anxiety and depression. Of the patients 52.7 % had psychological disorders with anxiety in 21.8 %, depression in 15.3 %, mixed diagnoses in 14.5 %, dystonia in 25.4 % and in 22.7 % no psychological disorders were diagnosed. General anxiety was frequent and panic disorders were often associated with other kinds of anxiety. Severe depression, such as bipolar disorder was rare. Dry eye scores were highest in the mixed group (0.59), and lowest in the group with mild anxiety (0.38). No single sicca phase disorder could be correlated with any of the psychological diagnoses. Patients with therapy-resistant dry eye syndrome often suffer from anxiety and depression. The psychological stress acts on the nervous system to suppress lacrimal gland function. Further investigation of the correlation between the lacrimal tear film phase and psychological disorders is recommended. Knowledge of personality disorders may allow psychological support that would improve the treatment options for dry eye syndrome.

  17. Energy-saving drying and its application

    Science.gov (United States)

    Kovbasyuk, V. I.

    2015-09-01

    Superheated steam is efficiently applied as a coolant for the intensification of drying, which is an important component of many up-to-date technologies. However, traditional drying is extremely energy consuming, and many drying apparatus are environmentally unfriendly. Thus, it is important to implement the proposed drying technique using superheated steam under pressure significantly higher than the atmospheric one with subsequent steam transfer for use in a turbine for electric power generation as a compensation of energy costs for drying. This paper includes a brief thermodynamic analysis of such a technique, its environmental advantages, and possible benefits of the use of wet wastes and obtaining high-quality fuels from wet raw materials. A scheme is developed for the turbine protection from impurities that can occur in the steam at drying. Potential advantage of the technique are also the absence of heating surfaces that are in contact with wet media, the absence of the emissions to the atmosphere, and the use of low potential heat for desalination and the purification of water. The new drying technique can play an extremely important part in the implementation in the field of thermal destruction of anthropogenic wastes. In spite of the promotion of waste sorting to obtain valuable secondary raw materials, the main problem of big cities is nonutilizable waste, which makes not less than 85% of the starting quantity of waste. This can only be totally solved by combustion, which even more relates to the sewage sludge utilization. The wastes can be safely and efficiently combusted only provided that they are free of moisture. Combustion temperature optimization makes possible full destruction of dioxins and their toxic analogues.

  18. Componente Cultura del Agua del PMGRH: plan de trabajo

    OpenAIRE

    Autoridad Nacional del Agua; Proyecto de Modernización de la Gestión de Recursos Hídricos

    2012-01-01

    Describe el plan de trabajo del Componente Cultura del Agua del Proyecto de Modernización de la Gestión de Recursos Hídricos (PMGRH) en relacion a dos aspectos estructurales del proyecto: 1. Mejora de la capacidad de la Gestión Integrada de Recursos Hídricos (GIRH) a nivel nacional y 2. Fortalecimiento de las capacidades de GIRH en las cuencas.

  19. En busca del concepto de gerencia del cuidado

    Directory of Open Access Journals (Sweden)

    Ligia Teresa Mora-Delgado

    2005-12-01

    Full Text Available Este articulo, presenta los conceptos de gerencia del cuidado de enfermería, desarrollado por las enfermeras profesionales que laboran en le Empresa social del estado Hospital Universitario Erasmo Meoz de las Ciudad de Cúcuta, desde su desempeño en la asistencia, administración y docencia. Se pretende además precisar los elementos gerenciales, sociales, humanísticos y éticos que deben hacer parte del concepto de gerencia del cuidado.

  20. LA PERSISTENCIA DEL SUBALTERNO

    Directory of Open Access Journals (Sweden)

    John Beverley

    2002-01-01

    Full Text Available Este trabajo es el texto literal de una ponencia presentada en un panel sobre los estudios culturales latinoamericanos en el congreso de LASA en 2001 en Washington DC. Representa la posición desarrollada en el trabajo colectivo del llamado Grupo de Estudios Subalternos Latinoamericano, desde nuestra fundación en 1992 hasta la disolución del grupo en 2001, que sirve como pretexto introductorio para la ponencia. Los otros participantes en el panel eran Walter Mignolo, representando los estudios poscoloniales, Néstor García Canclini y John Kraniauskas, representando los estudios culturales, y Nelly Richard representando la llamada crítica cultural. El trabajo dialoga y debate con cada una de estas posiciones respectivamente desde el punto de vista específico de los estudios subalternos. Concluye con un llamado a una crítica del saber académico en sí.

  1. Acalasia. Controversias del tratamiento

    OpenAIRE

    Restrepo P, Antonio J; Rey T, Mario H; Garzón O, Martín A; Farfán Q, Yesid A; Molano V, Juan C; Marulanda, Juan C; Lizarazo, Jorge I

    2007-01-01

    La acalasia es un desorden motor del esófago caracterizado por pérdida de la peristalsis esofágica con falta en la relajación o relajación incompleta del esfínter esofágico inferior (EEI) (1). La causa exacta de este trastorno es desconocida. Los síntomas más comunes son disfagia, regurgitación, pérdida de peso y dolor torácico (2). La manometría esofágica es el principal método diagnóstico, mostrando aperistalsis del cuerpo esofágico con aumento de la presión, falta de relajación o relajació...

  2. Procedimiento Del Triple Fin

    Directory of Open Access Journals (Sweden)

    Oscar L. Bellido Aguilera

    2008-01-01

    Full Text Available Presenta un procedimiento novedoso basado en un método dialéctico - sistémico - integrador, que facilita la precisión de los fines u objetivos más generales de un proceso de desarrollo comunitario o de otros procesos de cambio deseados (un proyecto sociocultural, una investigación social, un proceso de mejoramiento organizacional, etc.. Su importancia radica en que los fines, según Marx, son una guía que rige como una ley la actuación del hombre y determinarlos es parte esencial del planeamiento del cambio. Se trata de un asunto aparentemente simple, sin embargo, en la práctica es mucho más problemático de lo que comúnmente se cree.

  3. Efecto del silicio y plaguicidas en la fertilidad del suelo y rendimiento del arroz

    OpenAIRE

    Furcal-Beriguete, Parménides; Herrera-Barrantes, Alejandra

    2013-01-01

    Efecto del silicio y plaguicidas en la fertilidad del suelo y rendimiento del arroz. El objetivo de este trabajo fue evaluar el efecto del silicio en la fertilidad del suelo, la incidencia de enfermedades y plagas insectiles, el rendimiento y la calidad de granos del cultivo de arroz. El estudio se realizó en La Vega, Florencia, San Carlos, Costa Rica entre mayo y octubre en los años 2010 y 2011, en el mismo lote con la variedad CR 4477. Se establecieron cinco tratamientos: silicio al suelo, ...

  4. Storia del pensiero matematico

    CERN Document Server

    Kline, Morris

    1999-01-01

    Costruita con l'intento di presentare le idee oltre ai protagonisti della matematica, questa storia ha il duplice pregio dell'esaustività e della chiarezza. Essa prevede infatti vari livelli di lettura: lo specialista vi trova una messe di dati, fonti e spunti di ricerca, mentre lo studente ha a disposizione un formidabile strumento di consultazione e sintesi. L'arco temporale coperto è vasto: dalla Mesopotamia a Euclide, da Fibonacci all'invenzione del calcolo infinitesimale, da Gauss a Poincare, con un'appendice dedicata agli sviluppi piu recenti scritta appositamente per la prima edizione italiana del 1991, nei «Manuali» Einaudi.

  5. La escritura del quechua

    OpenAIRE

    Authier, Martine du

    2015-01-01

    La mayor fantasía ha acompañado siempre la transcripción del quechua. El primer intento de sistematización fue el sistema de la Paz, en 1953. Sin embargo, no existe en el comercio un diccionario satisfactorio en lo que se refiere al quechua del Cusco y, prácticamente, nada se edita en quechua, fuera de algunos trabajos antropológicos bilingües. Bajo la égida de la UNESCO, la Academia Peruana de la Lengua Quechua, que tiene su sede en el Cusco, ha colaborado en un diccionario de doce de los tr...

  6. El lenguaje del cerebro

    Directory of Open Access Journals (Sweden)

    Antonio Ibáñez Molina

    2011-04-01

    Full Text Available La introducción de nuevas técnicas de análisis de ritmos EEG en estudio de la comprensión del lenguaje permite explorar esta habilidad humana desde una perspectiva de integración de grupos de redes neuronales. Los ritmos de disparo neuronal que generan estos grupos pueden conectarse por sincronía formando unidades funcionales transitorias distribuidas en diversas áreas del cerebro. En esta revisión comentamos algunos de estos ritmos y su relación con el lenguaje.

  7. Plasticidad del sistema nervioso

    Directory of Open Access Journals (Sweden)

    L. M. Garcia-Segura

    1976-06-01

    Full Text Available En este trabajo se revisan los conocimientos más recientes sobre el fenómeno de la plasticidad del sistéma nervioso, tanto a nivel morfológico como a nivel fisiológico y molecular. Se estudian los cambios morfólogicos y fisiológicos de las neuronas frente a la experiencia. Tambien se considera la adaptación molecular del sistéma nervioso a la información que recibe como la base de todo tipo de plasticidad.

  8. Las causas del desempleo

    OpenAIRE

    García Balbás, Salomé

    2014-01-01

    En este documento vamos a tratar de dar respuesta a la siguiente pregunta: ¿cuáles son las causas del desempleo? Para ello realizaremos un repaso de las principales teorías económicas del desempleo llegando a la conclusión de que existe una causa fundamental que lo genera: la rigidez de los salarios a la baja. Consideramos el desempleo como la existencia de un exceso de oferta en el mercado de trabajo y haremos alusión, únicamente, a la existencia de desempleo involuntario. La exposición de l...

  9. Determination of Sliced Pineapple Drying Characteristics in A Closed Loop Heat Pump Assisted Drying System

    Directory of Open Access Journals (Sweden)

    Cüneyt Tunçkal

    2018-02-01

    Full Text Available Pineapple (Ananascomosus slices were dried with the aid of a heat pump assisted dryer (HPD. During this process, air velocity was kept constant at 1m/s, while air temperatures were changed as 37°C, 40°C and 43°C. The drying air was also circulated by using an axial fan in a closed cycle and fresh air was not allowed into the system. The drying rate and drying time were significantly influenced by drying temperature. It was observed that drying temperatures had significant effects on the drying rate and drying time. During the conduct of the study, pineapple slices were dried at 37, 40 and 43°C for 465, 360 and 290 min, respectively. The specific moisture extraction ratio (SMER values were observed to change as drying temperatures were changed. The drying rate curves indicated that the whole drying process occurred in the falling rate period. Seven well-known thin-layer models (Lewis, Henderson &Pabis, Logarithmic, Page, Midilli & Kucuk, Weibull and Aghbashlo et al. were employed to make a prediction about drying kinetics through nonlinear regression analysis. The Midilli & Kucuk and Aghbashlo et al. models were consistent with the experimental data. Fick’s second law of diffusion was used to determine the moisture diffusivity coefficient ranging from 3.78×10–9 to 6.57×10-9  m2/s the each of the above mentioned temperatures. The dependence of effective diffusivity coefficient on temperature was defined by means a fan Arrhenius type equation. The activation energy of moisture diffusion was found to be 75.24kJ/mol.   Article History: Received: July 18th 2017; Received: October 27th 2017; Accepted: January 16th 2018; Available online How to Cite This Article: Tunçkal, C., Coşkun, S., Doymaz, I. and Ergun, E. (2018 Determination of Sliced Pineapple Drying Characteristics in A Closed Loop Heat Pump Assisted Drying System. International Journal of Renewable Energy Development, 7(1, 35-41. https://doi.org/10.14710/ijred.7.1.35-41

  10. Assessment of Osmotic Pre-Drying Treatment on Drying Rates of Fresh Tomato Fruits

    Directory of Open Access Journals (Sweden)

    P. A. Idah

    2014-06-01

    Full Text Available The aim of this work is to investigate the influence of osmotic pre-drying treatments on drying rates of tomato (Lycopersiconesculentum at various drying temperatures. Fresh Roma tomato fruit samples were sliced to a thickness of 5 mm and the seeds were removed. Weight of 300 g was measured for each of the three replicates and immersed in a hypertonic solution of sucrose of different concentrations 40 and 60 oBrix each held for osmotic duration of 1 and 2 hours, drained for 10 min and then dried at 50, 60, and 70 oC in a mechanical dryer. Control samples were also weighed 300 g per replicate and dried at 50, 60, and 70 oC without pre-drying treatment. The initial moisture content of fresh tomato used was 94.5% (wb. Moisture loss of each sample was monitored and recorded hourly until the product has reached the desired final moisture content (≤ 7%.The data collected were subjected to statistical analysis of variance (ANOVA and Duncan New Multiple range tests (DNMRT to ascertain the level of significance differences between the individual treatments and their interaction at p ≤ 0.05.The results show that at all the drying temperatures used, the control tomato samples exhibited the fastest drying rate with an average of 35.2 g/hr, samples pre-treated at 40 oBrix has an average drying rate of 26.6 g/hr, while samples pre-treated at 60 oBrix has the slowest drying rate of 25.2 g/hr. It was also revealed that samples subjected to 1 hour osmotic time have faster drying rates than those treated for 2 hours osmotic time.

  11. Inventario del Archivo del conde de Bornos

    Directory of Open Access Journals (Sweden)

    Pedro Antonio Porras Arboledas

    1995-01-01

    Full Text Available Mi primer contacto con esta Casa se remonta a algunos años atrás, cuando me Mamó la atención un documento muy interesante, publicado a comienzos del presente siglo por el ilustre erudito ubetense don Alfredo Cazaban, por el que los Reyes Católicos hacían merced a su secretario y jefe de la artillería real durante la Guerra contra Granada, Francisco Ramírez de Madrid, personaje madrileño de origen cántabro, de una heredad en término de Jaén —el cortijo de Bornos— por sus grandes esfuerzos en la conquista de las plazas, hasta el momento inexpugnables, de Cambil y Alhabar. Posteriormente, al realizar un estudio sobre el régimen señorial en el Reino de Jaén, intenté localizar los archivos de las diferentes casas nobiliarias asentadas en esta provincia, gracias a lo cual pude saber que la documentación del Condado de Bornos se hallaba en Madrid, bien en la Biblioteca Nacional o en el Archivo Histórico, ya que el actual Conde, el Excmo. Sr. Don Ignacio Ramírez de Haro, así me lo comunicó en marzo de 1983.

  12. Global Warming and 21st Century Drying

    Science.gov (United States)

    Cook, Benjamin I.; Smerdun, Jason E.; Seager, Richard; Coats, Sloan

    2014-01-01

    Global warming is expected to increase the frequency and intensity of droughts in the twenty-first century, but the relative contributions from changes in moisture supply (precipitation) versus evaporative demand (potential evapotranspiration; PET) have not been comprehensively assessed. Using output from a suite of general circulation model (GCM) simulations from phase 5 of the Coupled Model Intercomparison Project, projected twentyfirst century drying and wetting trends are investigated using two offline indices of surface moisture balance: the Palmer Drought Severity Index (PDSI) and the Standardized Precipitation Evapotranspiration Index (SPEI). PDSI and SPEI projections using precipitation and Penman- Monteith based PET changes from the GCMs generally agree, showing robust cross-model drying in western North America, Central America, the Mediterranean, southern Africa, and the Amazon and robust wetting occurring in the Northern Hemisphere high latitudes and east Africa (PDSI only). The SPEI is more sensitive to PET changes than the PDSI, especially in arid regions such as the Sahara and Middle East. Regional drying and wetting patterns largely mirror the spatially heterogeneous response of precipitation in the models, although drying in the PDSI and SPEI calculations extends beyond the regions of reduced precipitation. This expansion of drying areas is attributed to globally widespread increases in PET, caused by increases in surface net radiation and the vapor pressure deficit. Increased PET not only intensifies drying in areas where precipitation is already reduced, it also drives areas into drought that would otherwise experience little drying or even wetting from precipitation trends alone. This PET amplification effect is largest in the Northern Hemisphere mid-latitudes, and is especially pronounced in western North America, Europe, and southeast China. Compared to PDSI projections using precipitation changes only, the projections incorporating both

  13. Blanching, salting and sun drying of different pumpkin fruit slices.

    Science.gov (United States)

    Workneh, T S; Zinash, A; Woldetsadik, K

    2014-11-01

    The study was aimed at assessing the quality of pumpkin (Cucuribita Spp.) slices that were subjected to pre-drying treatments and drying using two drying methods (uncontrolled sun and oven) fruit accessions. Pre-drying had significant (P ≤ 0.05) effect on the quality of dried pumpkin slices. 10 % salt solution dipped pumpkin fruit slices had good chemical quality. The two-way interaction between drying methods and pre-drying treatments had significant (P ≤ 0.05) effect on chemical qualities. Pumpkin subjected to salt solution dipping treatment and oven dried had higher chemical concentrations. Among the pumpkin fruit accessions, pumpkin accession 8007 had the superior TSS, total sugar and sugar to acid ratio after drying. Among the three pre-drying treatment, salt solution dipping treatment had significant (P ≤ 0.05) effect and the most efficient pre-drying treatment to retain the quality of dried pumpkin fruits without significant chemical quality deterioration. Salt dipping treatment combined with low temperature (60 °C) oven air circulation drying is recommended to maintain quality of dried pumpkin slices. However, since direct sun drying needs extended drying time due to fluctuation in temperature, it is recommended to develop or select best successful solar dryer for use in combination with pre-drying salt dipping or blanching treatments.

  14. Coping with dry eyes: a qualitative approach.

    Science.gov (United States)

    Yeo, Sharon; Tong, Louis

    2018-01-16

    Dry eye is a common problem that affects many people worldwide, reducing quality of life and impacting daily activities. A qualitative approach often used in medicine and other disciplines is used to evaluate how people with dry eye cope with this impact. Six focus group sessions were conducted at the Singapore National Eye Centre (SNEC), premises of an eye research institute. These focus groups consist of a spectrum of dry eye sufferers (30 women, 8 men, aged 61 ± 11.8 years). Standard methods of coding followed by determination of themes were adhered to. Where classification was difficult, consensus was made between 3 assessors. Audio-recorded transcripts were coded in 10 themes by 3 assessors independently. Four of the themes involved traditional measures such as lid warming, cleansing, lubrication and oral dietary supplements. The other themes discovered were Traditional Chinese Medicine, modification of eye-care habits (e.g. wearing sunglasses), environmental humidity, lifestyle (e.g. sleeping habits), psychological attitude, and lastly sharing and communication. Holistic coping strategies were found to be prominent in dry eye sufferers from these focus groups, and people tend to find personalised ways of coping with the impact of dry eye on daily living.

  15. Dried fruits quality assessment by hyperspectral imaging

    Science.gov (United States)

    Serranti, Silvia; Gargiulo, Aldo; Bonifazi, Giuseppe

    2012-05-01

    Dried fruits products present different market values according to their quality. Such a quality is usually quantified in terms of freshness of the products, as well as presence of contaminants (pieces of shell, husk, and small stones), defects, mould and decays. The combination of these parameters, in terms of relative presence, represent a fundamental set of attributes conditioning dried fruits humans-senses-detectable-attributes (visual appearance, organolectic properties, etc.) and their overall quality in terms of marketable products. Sorting-selection strategies exist but sometimes they fail when a higher degree of detection is required especially if addressed to discriminate between dried fruits of relatively small dimensions and when aiming to perform an "early detection" of pathogen agents responsible of future moulds and decays development. Surface characteristics of dried fruits can be investigated by hyperspectral imaging (HSI). In this paper, specific and "ad hoc" applications addressed to propose quality detection logics, adopting a hyperspectral imaging (HSI) based approach, are described, compared and critically evaluated. Reflectance spectra of selected dried fruits (hazelnuts) of different quality and characterized by the presence of different contaminants and defects have been acquired by a laboratory device equipped with two HSI systems working in two different spectral ranges: visible-near infrared field (400-1000 nm) and near infrared field (1000-1700 nm). The spectra have been processed and results evaluated adopting both a simple and fast wavelength band ratio approach and a more sophisticated classification logic based on principal component (PCA) analysis.

  16. Aging: A Predisposition to Dry Eyes

    Directory of Open Access Journals (Sweden)

    Anushree Sharma

    2014-01-01

    Full Text Available Dry eye syndrome is a disease of the ocular surface and tear film that is prevalent in older adults. Even though the degree of visual acuity loss in dry eye patients is commonly mild-to-moderate, in the aging population, this minimal change in visual status can lead to a significant decrease in visual function and quality of life. A healthy ocular surface is maintained by appropriate tear production and tear drainage, and deficiencies in this delicate balance can lead to dryness. In the aging eye, risk factors such as polypharmacy, androgen deficiency, decreased blink rates, and oxidative stress can predispose the patient to developing dry eye that is frequently more severe, has higher economic costs, and leads to worse consequences to the well-being of the patient. Understanding why elderly patients are at higher risk for developing dry eyes can provide insights into the diagnosis and management of the growing number of older adults struggling with dry eye and minimize the burden of disease on our aging population.

  17. SILAGE CANE SUGAR ADDED WITH DRIED BREWER

    Directory of Open Access Journals (Sweden)

    W. J. R. Castro

    2015-02-01

    Full Text Available The objective of this experiment was to evaluate the fermentative parameters and chemical composition of silage cane sugar added with residue dried brewery. The experimental design was completely randomized with four treatments and four replications: 100% cane sugar; 90% of cane sugar + 10% residue dried brewer; 80% of cane sugar + 20% residue dried brewer and 70% cane sugar + 30% dried brewer based on natural matter, composed silages. The sugar cane was chopped in a stationary machine with forage particle size of approximately 2 cm, and homogenized manually with the additives. For storage chopped fresh weight were used in experimental silos capacity of about 4 liters. The results showed that the contents of dry matter and crude protein showed positive linear (P0.05 with mean value of 3.81, while for ether extract and ash results were positive linear (P0.05 for N ammonia presented average value of 4.18. It is concluded that the addition of brewer dehydrated improves the fermentation process of silage cane sugar, in addition to improving their nutritional characteristics.

  18. Porcelain tiles by the dry route

    International Nuclear Information System (INIS)

    Melchiades, F. G.; Daros, M. T.; Boschi, A. O.

    2010-01-01

    In Brazil, the second largest tile producer of the world, at present, 70% of the tiles are produced by the dry route. One of the main reasons that lead to this development is the fact that the dry route uses approximately 30% less thermal energy them the traditional wet route. The increasing world concern with the environment and the recognition of the central role played by the water also has pointed towards privileging dry processes. In this context the objective of the present work is to study the feasibility of producing high quality porcelain tiles by the dry route. A brief comparison of the dry and wet route, in standard conditions industrially used today to produce tiles that are not porcelain tiles, shows that there are two major differences: the particle sizes obtained by the wet route are usually considerably finer and the capability of mixing the different minerals, the intimacy of the mixture, is also usually better in the wet route. The present work studied the relative importance of these differences and looked for raw materials and operational conditions that would result in better performance and glazed porcelain tiles of good quality. (Author) 7 refs.

  19. Scaling theory of drying in porous media

    International Nuclear Information System (INIS)

    Tsimpanogiannis, I.N.; Yortsos, Y.C.; Poulou, S.; Kanellopoulos, N.; Stubos, A.K.

    1999-01-01

    Concepts of immiscible displacements in porous media driven by mass transfer are utilized to model drying of porous media. Visualization experiments of drying in two-dimensional glass micromodels are conducted to identify pore-scale mechanisms. Then, a pore network approach is used to analyze the advancing drying front. It is shown that in a porous medium, capillarity induces a flow that effectively limits the extent of the front, which would otherwise be of the percolation type, to a finite width. In conjuction with the predictions of a macroscale stable front, obtained from a linear stability analysis, the process is shown to be equivalent to invasion percolation in a stabilizing gradient. A power-law scaling relation of the front width with a diffusion-based capillary number is also obtained. This capillary number reflects the fact that drying is controlled by diffusion in contrast to external drainage. The scaling exponent predicted is compatible with the experimental results of Shaw [Phys Rev. Lett. 59, 1671 (1987)]. A framework for a continuum description of the upstream drying regimes is also developed. copyright 1999 The American Physical Society

  20. DRY MIX FOR OBTAINING FOAM CONCRETE

    Directory of Open Access Journals (Sweden)

    S. N. Leonovich

    2015-01-01

    Full Text Available Composition of a dry mix has been developed for production of non-autoclaved foam concrete with natural curing. The mix has been created on the basis of Portland cement, UFAPORE foaming agent, mineral additives (RSAM sulfoaluminate additive, MK-85 micro-silica and basalt fiber, plasticizing and accelerating “Citrate-T” additive and   redispersible Vinnapas-8034 H powder. It has been established that foam concrete with  density of 400–800 kg/m3, durability of 1,1–3,4 MPa, low water absorption (40–50 %, without shrinkable cracks has been formed while adding water of Water/Solid = 0.4–0.6 in the dry mix,  subsequent mechanical swelling and curing of foam mass.Introduction of the accelerating and plasticizing “Citrate-T” additive into composition of the dry mix leads to an increase of rheological properties in expanded foam mass and  time reduction of its drying and curing. An investigation on microstructure of foam-concrete chipping surface carried out with the help of a scanning electron microscope has shown that the introduction of  basalt fiber and redispersible Vinnapas-8034 H powder into the composition of the dry mix promotes formation of more finely-divided crystalline hydrates. Such approach makes it possible to change purposefully morphology of crystalline hydrates and gives the possibility to operate foam concrete structurization process.

  1. Neotropical dry forest wildlife water hole use and management

    Directory of Open Access Journals (Sweden)

    Christopher Vaughan

    1999-12-01

    Full Text Available Selected wildlife species diurnal use of a natural water hole (QD and an artificial water hole (AW were studied during 1990 dry season at Guanacaste Conservation Area, Costa Rica. In total, 919 individuals (six mammal and one game bird species consumed water from QD, while 713 individuals (four mammal species consumed water from AW. Estimated daily water consumption by selected wildlife species was 29.7 l at QD and 27.3 l at AW. Estimated 24-h water consumed by all wildlife species or evaporated was 44.6 l at QD and 41.1 l at AW. This resulted from summing: a water consumed by studied species, b estimated 24-hour water consumed by other wildlife (QD = 14.85 l, AW = 13.65 l and c daily water evaporation (QD = 0.04 l, AW = 0.10 l. During a 120-day dry season, AW required about 4 932 l of water from the park administration. Management implications for neotropical dry forest water holes are discussed.Se estudió el uso diurno de un ojo de agua natural (QD y otro artificial (AW a finales de la época seca de 1990 en el Area de Conservacion de Guanacaste, Costa Rica. En total 919 individuos (seis especies de mamíferos y una de ave cinegética consumieron agua de QD y 713 individuos (cuatro especies de mamíferos de AQ. Se estimó que en un dia, las especies de vida silvestre estudiados tomaron 29.7 l y 27.3 l de agua de QD y AW, respectivamente. El total de agua consumido o evaporado de cada ojo de agua durante 24-horas fue estimado en 44.6 l en QD y 41.1 l en AW, con base en: a agua bebida durante 12 h por las especies seleccionadas, b agua bebida por todos los otros individuos durante 24 h (QD = 14.85 l, AW = 13.65 l y c evaporación diaria (QD = 0.04 l, AW = 0.01 l. Para abastecer AW durante una epoca seca de 120 días, la administración del parque debe proveer 4 932 l de agua. Se discute las implicaciones de manejo en las regiones de bosque seco neotropical.

  2. Competencia Desarrollo del Pensamiento Creativo

    OpenAIRE

    Rodríguez, Eric; Miceli, Francisco; Tiburcio, Georgina; Gómez, Orlando

    2012-01-01

    1. ¿Qué significa la competencia Desarrollo del Pensamiento Creativo? 2. ¿Por qué es relevante que adquiera la competencia Desarrollo del Pensamiento Creativo en mi formación? 3. ¿Cómo aprendo la competencia Desarrollo del Pensamiento Creativo? 4. ¿Cómo aplico la competencia Desarrollo del Pensamiento Creativo? 5. ¿Cómo puedo autoevaluar mi competencia (con miras a un constante crecimiento)?

  3. Model-based optimization of the primary drying step during freeze-drying

    DEFF Research Database (Denmark)

    Mortier, Séverine Thérèse F.C.; Van Bockstal, Pieter-Jan; Nopens, Ingmar

    2015-01-01

    Since large molecules are considered the key driver for growth of the pharmaceutical industry, the focus of the pharmaceutical industry is shifting from small molecules to biopharmaceuticals: around 50% of the approved biopharmaceuticals are freeze-dried products. Therefore, freeze- drying is an ...

  4. PADDY DRYING IN MIXED ADSORPTION DRYER WITH ZEOLITE: DRYING RATE AND TIME ESTIMATION

    Directory of Open Access Journals (Sweden)

    Mochammad Djaeni

    2013-11-01

    Full Text Available Recently, the main problem of the rice stock and distribution in Indonesia is the quality degradation as indicated in unpleasant odor (smelly, stained, yellowness, and high percentage of broken rice. This is due to the low of paddy quality dried by from either direct sunlight or conventional fluidized bed dryer. As a result, the paddy cracks and breaks easily during milling in which causes the storage life being shorter as the enzymatic degradation by germ or fungi occurs. Air dehumidified with zeolite at drying medium temperature is potential to improve the quality of paddy. Zeolite is a material having high affinity to water vapor. In this case, the paddy and zeolite was mixed and fluidized with the air. The air will evaporate water from paddy, and at same time, the zeolite will adsorb water from air. Hence, the humidity of dryer can be kept low in which improves the driving force for drying. This work discusses the effect of presence of zeolite in the dryer, operational drying temperature, air velocity and relative humidity on drying rate of paddy. The results showed that increasing of zeolite as well as operational temperature increased the drying rate. In addition, using the model, the air dehumidification with zeolite and increase of air velocity can speed up drying time significantly at operational temperature below 80oC. This condition is very suitable for paddy drying since the quality degradation can be avoided.

  5. The effect of drying on the nutritional composition of fresh and dried ...

    African Journals Online (AJOL)

    A study was carried out to identify some nutritional properties of Moringa Oeifera leaf and to compare the nutritional qualities of fresh and dried leaves of Moringa Oleifera.Two samples each of fresh and dried Moringa Oeifera leaves were used for the experiment and the mean values in their nutritional qualities compared.

  6. Rehydration of freeze-dried and convective dried boletus edulis mushrooms: effect on some quality parameters.

    Science.gov (United States)

    Hernando, I; Sanjuán, N; Pérez-Munuera, I; Mulet, A

    2008-10-01

    Quality of rehydrated products is a key aspect linked to rehydration conditions. To assess the effect of rehydration temperature on some quality parameters, experiments at 20 and 70 degrees C were performed with convective dried and freeze-dried Boletus edulis mushrooms. Rehydration characteristics (through Peleg's parameter, k(1), and equilibrium moisture, W(e)), texture (Kramer), and microstructure (Cryo-Scanning Electron Microscopy) were evaluated. Freeze-dried samples absorbed water more quickly and attained higher W(e) values than convective dried ones. Convective dehydrated samples rehydrated at 20 degrees C showed significantly lower textural values (11.9 +/- 3.3 N/g) than those rehydrated at 70 degrees C (15.7 +/- 1.2 N/g). For the freeze-dried Boletus edulis, the textural values also exhibited significant differences, being 8.2 +/- 1.3 and 10.5 +/- 2.3 N/g for 20 and 70 degrees C, respectively. Freeze-dried samples showed a porous structure that allows rehydration to take place mainly at the extracellular level. This explains the fact that, regardless of temperature, freeze-dried mushrooms absorbed water more quickly and reached higher W(e) values than convective dried ones. Whatever the dehydration technique used, rehydration at 70 degrees C produced a structural damage that hindered water absorption; consequently lower W(e) values and higher textural values were attained than when rehydrating at 20 degrees C.

  7. Economic comparison of a sixty day dry period with no dry period on Dutch dairy farms

    NARCIS (Netherlands)

    Heeren, J.A.H.; Steeneveld, W.; Berentsen, P.B.M.

    2014-01-01

    In the Netherlands it is general practice that dairy cows have a dry period of six to eight weeks. Research, however, shows that omission of the dry period avoids the negative energy balance after calving with its potential negative effects on metabolic disorders, infectious diseases, and fertility.

  8. Persistence and survival of pathogens in dry foods and dry food processing environments

    NARCIS (Netherlands)

    Beuchat, L.; Komitopoulou, E.; Betts, R.; Beckers, H.; Bourdichon, F.; Joosten, H.; Fanning, S.; ter Kuile, B.

    2011-01-01

    Low-moisture foods and food ingredients, i.e., those appearing to be dry or that have been subjected to a drying process, represent important nutritional constituents of human diets. Some of these foods are naturally low in moisture, such as cereals, honey and nuts, whereas others are produced from

  9. Are freeze drying and oven drying methods for trace metal determination in zoological specimens analytically sound

    International Nuclear Information System (INIS)

    Fourie, H.O.; Peisach, M.

    1976-01-01

    High specific activity radio-isotopes of chromium, zinc and selenium were used to label these elements accumulated by the oyster Crassostrea gigas. The retention of the metabolised forms of these elements during freeze-drying or oven drying at 50, 90, 105 and 120 deg C was studied. Observed losses question the accuracy of these analytical procedures. (author)

  10. An Old-Growth Definition for Dry and Dry-Mesic Oak-Pine Forests.

    Science.gov (United States)

    David L. White; F. Thomas. Lloyd

    1998-01-01

    Dry and dry-mesic oak-pine forests are widely distributed from New Jersey to Texas, but representative old-growth stands are rare. Historical accounts of composition, along with information from existing old-growth stands, were used to characterize this type. Shortleaf pine and white oak were the most widely distributed trees across all old-growth stands. Shortleaf was...

  11. Scalable organic solvent free supercritical fluid spray drying process for producing dry protein formulations.

    Science.gov (United States)

    Nuchuchua, O; Every, H A; Hofland, G W; Jiskoot, W

    2014-11-01

    In this study, we evaluated the influence of supercritical carbon dioxide (scCO2) spray drying conditions, in the absence of organic solvent, on the ability to produce dry protein/trehalose formulations at 1:10 and 1:4 (w/w) ratios. When using a 4L drying vessel, we found that decreasing the solution flow rate and solution volume, or increasing the scCO2 flow rate resulted in a significant reduction in the residual water content in dried products (Karl Fischer titration). The best conditions were then used to evaluate the ability to scale the scCO2 spray drying process from 4L to 10L chamber. The ratio of scCO2 and solution flow rate was kept constant. The products on both scales exhibited similar residual moisture contents, particle morphologies (SEM), and glass transition temperatures (DSC). After reconstitution, the lysozyme activity (enzymatic assay) and structure (circular dichroism, HP-SEC) were fully preserved, but the sub-visible particle content was slightly increased (flow imaging microscopy, nanoparticle tracking analysis). Furthermore, the drying condition was applicable to other proteins resulting in products of similar quality as the lysozyme formulations. In conclusion, we established scCO2 spray drying processing conditions for protein formulations without an organic solvent that holds promise for the industrial production of dry protein formulations. Copyright © 2014 Elsevier B.V. All rights reserved.

  12. The secondary drying and the fate of organic solvents for spray dried dispersion drug product.

    Science.gov (United States)

    Hsieh, Daniel S; Yue, Hongfei; Nicholson, Sarah J; Roberts, Daniel; Schild, Richard; Gamble, John F; Lindrud, Mark

    2015-05-01

    To understand the mechanisms of secondary drying of spray-dried dispersion (SDD) drug product and establish a model to describe the fate of organic solvents in such a product. The experimental approach includes characterization of the SDD particles, drying studies of SDD using an integrated weighing balance and mass spectrometer, and the subsequent generation of the drying curve. The theoretical approach includes the establishment of a Fickian diffusion model. The kinetics of solvent removal during secondary drying from the lab scale to a bench scale follows Fickian diffusion model. Excellent agreement is obtained between the experimental data and the prediction from the modeling. The diffusion process is dependent upon temperature. The key to a successful scale up of the secondary drying is to control the drying temperature. The fate of primary solvents including methanol and acetone, and their potential impurity such as benzene can be described by the Fickian diffusion model. A mathematical relationship based upon the ratio of diffusion coefficient was established to predict the benzene concentration from the fate of the primary solvent during the secondary drying process.

  13. Suitability of microwave drying for mealworms (Tenebrio molitor) as alternative to freeze drying: Impact on nutritional quality and colour.

    Science.gov (United States)

    Lenaerts, S; Van Der Borght, M; Callens, A; Van Campenhout, L

    2018-07-15

    Freeze drying represents the current practice to stabilize mealworms, even though it is an energy demanding technique. Therefore, it was examined in the present study whether microwave drying could be a proper alternative. To this end, the impact of both drying techniques on the proximate composition, vitamin B 12 content, fatty acid profile, oxidation status and colour parameters of mealworms was investigated. Furthermore, the influence of the application of vacuum during microwave drying was studied. The different drying technologies resulted in small differences in the proximate composition, while the vitamin B 12 content was only reduced by microwave drying. The fat fraction of freeze dried mealworms showed a higher oxidation status than the fat of microwave dried mealworms. Application of a vacuum during the microwave drying process did not appear to offer advantages. This research shows that for mealworms microwave drying can be a proper alternative to freeze drying. Copyright © 2018 Elsevier Ltd. All rights reserved.

  14. Evaluation of drying methods with respect to drying kinetics, mineral content and colour characteristics of rosemary leaves

    International Nuclear Information System (INIS)

    Arslan, Derya; Musa Ozcan, M.

    2008-01-01

    Rosemary leaves (Rosmarinus officinalis L., Lamiaceae) were dried by using sun, oven (50 deg. C) and microwave oven (700 W, 2450 MHz) drying methods. Microwave oven drying shortened the drying time more than 99% when compared to the sun and oven drying methods. K, Ca, Na, Mg and P were the most abundant elements in the rosemary samples. The mineral content of oven dried rosemary leaves was higher than that of the sun and microwave dried samples. The logarithmic and Midilli and Kuecuek models were shown to give a good fit to the sun and oven drying. The Page, Modified Page and Midilli and Kuecuek models have shown a better fit to the experimental microwave oven drying data of rosemary leaves. Microwave oven drying revealed optimum colour values. Oven drying resulted in a considerable decrease in the colour quality of the rosemary leaves

  15. PERFORMANCE ASSESSMENT IN OPERATING DRY PORTS

    Directory of Open Access Journals (Sweden)

    Ciortescu Cezar-Gabriel

    2010-12-01

    Full Text Available In this paper, an approach for recognizing and defining correct and operable performance will be presented with the purpose of evaluating the effectiveness and efficiency of processes in dry ports (inland intermodal hubs. The challenge in evaluating the possible improvements of the underlying processes lies in the special nature and the complex structure of dry ports. It is important to consider that all the processes are highly interconnected and that changes in parameters in one process also have an impact on parameters in other processes. Furthermore, the performance of dry ports, seen as the backbone of the system, has a significant impact on the overall performance of the whole transportation network.

  16. Frictional strength of wet and dry montmorillonite

    Science.gov (United States)

    Morrow, C. A.; Moore, D. E.; Lockner, D. A.

    2017-05-01

    Montmorillonite is a common mineral in fault zones, and its low strength relative to other common gouge minerals is important in many models of fault rheology. However, the coefficient of friction, μ, varies with degree of saturation and is not well constrained in the literature due to the difficulty of establishing fully drained or fully dried states in the laboratory. We measured μ of both saturated and oven-dried montmorillonite at normal stresses up to 700 MPa. Care was taken to shear saturated samples slowly enough to avoid pore fluid overpressure. For saturated samples, μ increased from 0.10 to 0.28 with applied effective normal stress, while for dry samples μ decreased from 0.78 to 0.45. The steady state rate dependence of friction, (a - b), was positive, promoting stable sliding. The wide disparity in reported frictional strengths can be attributed to experimental procedures that promote differing degrees of partial saturation or overpressured pore fluid conditions.

  17. Dry separation technology of transuranic elements

    International Nuclear Information System (INIS)

    Inoue, Tadashi

    1999-01-01

    The separation principle of transuranic elements (TRU) by a dry method, the separation technique of TRU from a high level waste solution and a dry recycle technology of LWR and FBR fuel cycle are explained. The dry method used molten salt and liquid metal. TRU and the rare earth elements in the molten salt (LiCl-KCl, LiCl-KCl/Cd and LiCl-KCl/Bi system) were separated by two methods such as the electrolytic refining and the reduction-extraction method. The former method separated 98% U, Np and Pu, but low Am. The latter method was able to separate more than 99.9% Np and Pu and 99.7% Am. (S.Y.)

  18. Dry eye syndrome. Etiological and therapeutic aspects.

    Science.gov (United States)

    Apostol, Silvia; Filip, M; Dragne, Carmen; Filip, A

    2003-01-01

    "Dry eye syndrome" is a common disorder of the tear film that results from inadequate tear production, excessive tear evaporation or abnormality in mucin or lipid components of the tear film. A number of 53 patients suffering from dry eye syndrome were followed up for a period of 18 months. The study group was heterogeneous, including a lot of conditions accompanied by dry eye syndrome: Syogren's syndrome, lupus erythematous, ocular rosacea, patients with systemic treatments with antidepressants, betablockers, diuretics, oral contraceptives, glaucomatous patients with topical beta-blockers, postmenopausal women, aging people, computer users and long-term contact lens wearers. The therapeutical options were dictated by the severity of the syndrome: substitution therapy, treatment of the underlying eyelid diseases, modifying of the environmental conditions and treatment of the complications in the most severe cases. The new pathological approach is innovative and it may provide a real therapeutical measure for this condition: topical A Cyclosporine and androgen drops.

  19. Geothermal rice drying unit in Kotchany, Macedonia

    International Nuclear Information System (INIS)

    Popovski, K.; Dimitrov, K.; Andrejevski, B.; Popovska, S.

    1992-01-01

    A geothermal field in Kotchany (Macedonia) has very advantageous characteristics for direct application purposes. Low content of minerals, moderate temperature (78C) and substantial available geothermal water flow (up to 300 1/s) enabled the establishment of a district heating scheme comprising mainly agricultural and industrial uses. A rice drying unit of 10 t/h capacity was installed 8 years ago, using the geothermal water as the primary heat source. A temperature drop of 75/50C enables the adaptation of conventional drying technology, already proven in practice in the surrounding rice growing region. Water to air heat exchanger and all necessary equipment and materials are of local production, made of copper and carbon steel. The use of such drying units is strongly recommended for the concrete district heating scheme because it offers a very simple geothermal application and enables improvement in the annual heating load factor without high investments in geothermal water distribution lines

  20. Interim dry fuel storage for magnox reactors

    Energy Technology Data Exchange (ETDEWEB)

    Bradley, N [National Nuclear Corporation, Risley, Warrington (United Kingdom); Ealing, C [GEC Energy Systems Ltd, Whetstone, Leicester (United Kingdom)

    1985-07-01

    In the UK the practice of short term buffer storage in water ponds prior to chemical reprocessing had already been established on the early gas cooled reactors in Calder Hall. Thus the choice of water pond buffer storage for MGR power plants logically followed the national policy decision to reprocess. The majority of the buffer storage period would take place at the reprocessing plant with only a nominal of 100 days targeted at the station. Since Magnox clad fuel is not suitable for long term pond storage, alternative methods of storage on future stations was considered desirable. In addition to safeguards considerations the economic aspects of the fuel cycle has influenced the conclusion that today the purchase of a MGR power plant with dry spent fuel storage and without commitment to reprocess would be a rational decision for a country initiating a nuclear programme. Dry storage requirements are discussed and two designs of dry storage facilities presented together with a fuel preparation facility.

  1. Radiation preservation of dry fruits and nuts

    International Nuclear Information System (INIS)

    Wahid, M.; Sattar, A.; Jan, M.; Ahmad, A.; Khan, I.

    1988-01-01

    Dried fruits are considered a major source of income and foreign exchange in many countries. The spoilage of dried fruits and nuts by insect infestation, colour deterioration and chemical changes during storage are the serious problems especially under humid tropical conditions. The present work was undertaken to study the effect of irradiation in combination with different modified storage environments on insect infestation as well as chemical and sensory quality indices. The affect of gamma radiation dose of 1 KGy and storage environments such as air vacuum and carbon dioxide on insect infestation of dry fruits and nuts. In the case of un-irradiated samples, insect infestation progressed throughout the storage period especially in those kept under air. The vacuum storage was found better in checking infestation followed by CO/sub/2 and air. (orig./A.B.)

  2. Interim dry fuel storage for magnox reactors

    International Nuclear Information System (INIS)

    Bradley, N.; Ealing, C.

    1985-01-01

    In the UK the practice of short term buffer storage in water ponds prior to chemical reprocessing had already been established on the early gas cooled reactors in Calder Hall. Thus the choice of water pond buffer storage for MGR power plants logically followed the national policy decision to reprocess. The majority of the buffer storage period would take place at the reprocessing plant with only a nominal of 100 days targeted at the station. Since Magnox clad fuel is not suitable for long term pond storage, alternative methods of storage on future stations was considered desirable. In addition to safeguards considerations the economic aspects of the fuel cycle has influenced the conclusion that today the purchase of a MGR power plant with dry spent fuel storage and without commitment to reprocess would be a rational decision for a country initiating a nuclear programme. Dry storage requirements are discussed and two designs of dry storage facilities presented together with a fuel preparation facility

  3. Crust formation in drying colloidal suspensions

    KAUST Repository

    Style, R. W.

    2010-06-30

    During the drying of colloidal suspensions, the desiccation process causes the suspension near the air interface to consolidate into a connected porous matrix or crust. Fluid transport in the porous medium is governed by Darcy\\'s law and the equations of poroelasticity, while the equations of colloid physics govern processes in the suspension. We derive new equations describing this process, including unique boundary conditions coupling the two regions, yielding a moving-boundary model of the concentration and stress profiles during drying. A solution is found for the steady-state growth of a nedimensional crust during constant evaporation rate from the surface. The solution is used to demonstrate the importance of the system boundary conditions on stress profiles and diffusivity in a drying crust. © 2011 The Royal Society.

  4. Ruptura del projecte parental i disposició dels preembrions

    OpenAIRE

    Farnós Amorós, Esther

    2010-01-01

    La tesi doctoral "Ruptura del projecte parental i disposició dels preembrions" analitza els efectes del consentiment a les tècniques de reproducció assistida prestat en el marc d'un projecte parental. La tesi ofereix una resposta als conflictes que enfronten exesposos o exconvivents en relació al destí dels preembrions sobrants d'un cicle de fecundació "in vitro" iniciat durant la relació. Aquests conflictes constitueixen un grup de casos al voltant del qual no hi ha solucions legislatives qu...

  5. La equinoterapia en las distintas alteraciones del desarrollo del menor.

    OpenAIRE

    Chamorro González, Mireya

    2015-01-01

    La equinoterapia consiste en la utilización del caballo como un método terapéutico para rehabilitar a personas con discapacidad. Esta terapia es considerada una gran alternativa para aumentar el autoestima de los que sufren algún tipo de discapacidad, también a través de esta terapia se mejora y fortalece el estado emocional, así del mismo modo ayuda a mejorar la manera de desenvolverse en su entorno social. Esta terapia se realiza a través de la trasmisión del calor corporal del caballo, del...

  6. Gestión del riesgo del cambio (segunda parte)

    OpenAIRE

    Zorrilla Salgador, Juan Pablo

    2004-01-01

    Segunda parte del artículo acerca del uso de futuros sobre el tipo de cambio. Esta continuación abarca estrategias, definiciones, metodología y explicaciones sobre todo lo relacionado con el Ratio de cobertura de los futuros y la aparición del riesgo base.Segunda parte del artículo acerca del uso de futuros sobre el tipo de cambio. Esta continuación abarca estrategias, definiciones, metodología y explicaciones sobre todo lo relacionado con el Ratio de cobertura de los futuros y la aparición d...

  7. Steam drying compared to drum drying markedly increases early phase rumen fermentability of sugar beet pulp

    DEFF Research Database (Denmark)

    Nielsen, Mette Olaf; Larsen, Kasper; Jensen, Arne Sloth

    2017-01-01

    Freshly pressed and dried sugar beet pulp was sampled from 2 different factories located within a distance of 30 km and on 4 different dates. One factory was equipped with a steam dryer and the other with a drum dryer. A recognized in vitro technique was used to establish, how the drying process...... affected rumen fermentability of the pulp, since fibrous feeds (such as sugar beet pulp) rely on microbial fermentation in the rumen to be digestible to the cow. Steam dried pulp had a remarkable >60% higher fermentability compared to drum dried pulp during the first 12(-15) hours of fermentation...... (such as pectin) and small particles as low as 6.7-13.3 hours. Future feeding trials are needed to establish exactly how much the feeding value is increased in steam dried sugar beet pulp....

  8. del's Proof

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 12; Issue 5. Gödel's Proof - Incompleteness Theorems. S M Srivastava. General Article Volume 12 Issue 5 May 2007 pp 71-84. Fulltext. Click here to view fulltext PDF. Permanent link: https://www.ias.ac.in/article/fulltext/reso/012/05/0071-0084. Keywords.

  9. Marketing Mix del Software.

    Directory of Open Access Journals (Sweden)

    Yudith del Carmen Rodríguez Pérez

    2006-03-01

    Por ello, en este trabajo se define el concepto de producto software, se caracteriza al mismo y se exponen sus atributos de calidad. Además, se aborda la mezcla de marketing del software necesaria y diferente a la de otros productos para que este triunfe en el mercado.

  10. Gerencia del servicio

    OpenAIRE

    Nancy Peña Acosta

    1992-01-01

    Estamos en la era de la pirámide invertida donde el cliente es primero por lo que es fundamental incentivar la calidad desde abajo; hacer que el trabajador defina su misión, sienta que es parte de la compañía para que la satisfacción del negocio realizado sea de todos.

  11. El Juego del Juego

    OpenAIRE

    Carvalho, Nazaré Cristina

    2012-01-01

    DUVIGNAUD, Jean. El Juego del Juego. Santafé de Bogotá, Colômbia: Fondo de Cultura Econômica, 1997.The game gameDUVIGNAUD, Jean. The Game Game. Santafé de Bogotá, Colombia: Fondo de Cultura Econômica, 1997

  12. El helor del cuerpo

    OpenAIRE

    Sánchez-Biosca, Vicente

    1992-01-01

    Ensayo sobre las formas clásicas y modernas de la metamorfosis. En esta figura mitológica se advierte de manera privilegiada la entrada del imaginario científico, biológico y genético en el dominio de las construcciones literarias y cinematográficas.

  13. Carta del Editor

    Directory of Open Access Journals (Sweden)

    Luis Eladio Proaño

    2014-12-01

    Full Text Available La publicación se centra en temas como: Procesos electorales en México e Italia, se analizan los procesos comunicacionales y sus efectos; las infiltraciones de las agencias de seguridad en la actividad periodística en Europa; la radio y la televisión pública en los EE.UU. Para conocer cómo la prensa enfrenta los problemas críticos entre países, esta el caso de Uruguay y Argentina (discrepancia por la planta de procesamiento de papel y la contaminación del Río de La Plata. Otro artículo refiere la difícil relación entre los medios de comunicación y el gobierno de Chávez en Venezuela. Se aborda el caso brasileño para entender el crecimiento de los Observatorios de Medios; otro sobre el crecimiento del "periodismo confidencial" en la web y la prensa gratuita. Se estudia el impacto de la telenovela "pasión de gavilanes". Para quienes interese la penetración del Internet está: "Usos y competencias del weblog en las corporaciones" más otro sobre la lucha sorda que mantienen los gigantes de la autopista de la información Google y Yahoo.

  14. Punctualizaciones del CERN

    CERN Multimedia

    2002-01-01

    "Viene de la pagina anterior. Puntualizaciones del CERN. La valoracion que me merece la aprobacion en el Consejo de Ministros el 24 de mayo de un acuerdo de colaboracion entre el MCYT y el CERN para el proyecto de neutrinos al Gran Sasso es positiva" (1 page).

  15. The effect of slicing type on drying kinetics and quality of dried carrot

    Directory of Open Access Journals (Sweden)

    M Naghipour zadeh mahani

    2016-04-01

    Full Text Available Introduction: Carrot is one of the most common vegetables used for human nutrition because of its high vitamin and fiber contents. Drying improves the product shelf life without addition of any chemical preservative and reduces both the size of package and the transport cost. Drying also aidsto reduce postharvest losses of fruits and vegetables especially, which can be as high as 70%. Dried carrots are used in dehydrated soups and in the form of powder in pastries and sauces. The main aim of drying agricultural products is decrease the moisture content to a level which allows safe storage over an extended period. Many fruits and vegetables can be sliced before drying.because of different tissue of a fruit or vegetable, cutting them in different direction and shape created different tissue slices. Due to drying is the exiting process of the moisture from internal tissue so different tissue slices caused different drying kinetics. Therefore, the study on effect of cutting parameters on drying is necessary. Materials and Methods: Carrots (Daucus carota L. were purchased from the local market (Kerman, Iran and stored in a refrigerator at 5°C. The initial moisture contents of the Carrot samples were determined by the oven drying method. The sample was dried in an oven at 105±2°C about 24 hours. The carrots cut by 3 models blade at 3 directions. The samples were dried in an oven at 70°C. Moisture content of the carrot slices were determined by weighting of samples during drying. Volume changes because of sample shrinkage were measured by a water displacement method. Rehydration experiment was performed by immersing a weighted amount of dried samples into hot water 50 °C for 30 min. In this study the effect of some cutting parameters was considered on carrot drying and the quality of final drying product. The tests were performed as a completely random design. The effects of carrot thickness at two levels (3 and 6 mm, blade in 3 models (flat blade

  16. Software del sistema osteomioarticular

    Directory of Open Access Journals (Sweden)

    Dianelys León Medina

    2015-06-01

    Full Text Available Introducción: la aplicación en la enseñanza de las Tecnologías de la Informática y las Comunicaciones, es una de las líneas que ha trazado el sistema de salud cubano en estudiantes de las ciencias médicas. La anatomía es una de las ciencias que integra la disciplina de Morfofisiología y para facilitar su comprensión resulta necesario el empleo de recursos y estrategias, entre los que puede figurar un software educativo. Objetivo: diseñar un software sobre la anatomía del sistema osteomioarticular de cabeza y cuello para los estudiantes de primer año de la carrera de Estomatología de Pinar del Río. Material y método: se realizó un estudio cualitativo. Para obtener los resultados se utilizó el método materialista dialéctico. Para la dialéctica del desarrollo del proceso estudiado se utilizaron los métodos teóricos, empíricos, el estudio profundo del tema, tipo de plataforma a utilizar y criterios de los especialistas. Para su procesamiento se utilizaron técnicas estadísticas descriptivas e inferenciales no paramétricas. Resultados: debido a la necesidad de fortalecer en los estudiantes las habilidades en la utilización de las tecnologías de la informática y las comunicaciones, se elaboró el software de la anatomía del sistema osteomioarticular de cabeza y cuello "Aprendiendo anatomía" mediante imágenes, videos y textos. Conclusiones: el software constituye un aporte al proceso enseñanza aprendizaje, el cual facilita el trabajo independiente y autopreparación mediante la interactividad con el contenido, retroalimentación y evaluación utilizando medios de enseñanza modernos, lo cual tributa al modo de actuación del futuro egresado.

  17. Historia deldel = History of Padel

    Directory of Open Access Journals (Sweden)

    Bernardino Javier Sánchez-Alcaraz Martínez

    2013-10-01

    Full Text Available El presente trabajo resume la historia del deporte deldel. Existen dos versiones sobre el origen deldel. La primera versión relaciona los antecedentes deldel con los de otros deportes de raqueta como el tenis o el bádminton, siendo su origen común el jeu de la paume francés. Posteriormente, surgen variantes en Estados Unidos como el Paddle Tennis y el Platform Tennis, siendo versiones reducidas del tenis, pero con elementos muy comunes al pádel actual. La segunda versión, aprobada por la Federación Internacional de Pádel, afirma que este deporte nació en México, en 1969, a través del empresario Enrique Corcuera.--------------------------------------------------------------------This research summarizes the history of paddle sport. There are two versions about the origin of paddle. The first version relates the history of paddle with other racket sports like tennis or badminton, and its common origin of the Jeu de Paume French. Later, in in the United States, appear two sports called Paddle Tennis and Platform Tennis, which are reduced versions of tennis sport, but these have lot of common characteristics with paddle. The second version, approved by the International Padel Federation, said the sport was born in Mexico in 1969, through the businessman Enrique Corcuera.

  18. Thermal drying of the solid fraction from biogas digestate

    DEFF Research Database (Denmark)

    Pantelopoulos, Athanasios; Magid, Jakob; Jensen, Lars Stoumann

    2016-01-01

    Drying of solids produced from digestate is prone to N losses through NH3 volatilisation. The applicability of acidification as an NH3 emission mitigation technique during the drying of solids from digestate was assessed in a drying experiment. Operating conditions comprised four drying temperatu...

  19. Mathematical and computational modeling simulation of solar drying Systems

    Science.gov (United States)

    Mathematical modeling of solar drying systems has the primary aim of predicting the required drying time for a given commodity, dryer type, and environment. Both fundamental (Fickian diffusion) and semi-empirical drying models have been applied to the solar drying of a variety of agricultural commo...

  20. Feasibility analysis of heat pump dryer to dry hawthorn cake

    Energy Technology Data Exchange (ETDEWEB)

    Wang, D.C., E-mail: wdechang@163.com [College of Electromechanical Engineering, Qingdao University, Qingdao 266071 (China); Zhang, G.; Han, Y.P.; Zhang, J.P.; Tian, X.L. [College of Electromechanical Engineering, Qingdao University, Qingdao 266071 (China)

    2011-08-15

    Highlights: {yields} A heat pump dryer (HPD) is effectively proposed to dry hawthorn cake-likely materials. {yields} Low drying temperature and high COP of heat pump are obtained in drying beginning. {yields} HPD is more effective, economic than a traditional hot air dryer. {yields} Feasibility of the HPD is also validated by the operation economy estimation. - Abstract: A heat pump dryer (HPD) would be an economic, environmentally friendly, hygienic drying machine used to dry some food, such as hawthorn cakes. Based on the production process of the hawthorn cake, a HPD is proposed and its basic principle is introduced. The experimental drying curves of the hawthorn cake using the heat pump drying method and the traditional hot air drying method are compared and analyzed. The drying process of hawthorn cakes is similar to that of the other drying materials. The higher drying temperature causes a faster drying process. But in the initial stage of the heat pump drying process, the water content of the hawthorn cake is not sensitive to the drying temperature, so a lower drying air temperature can be available in order to get a higher coefficient of performance (COP) of the heat pump (HP). The experimental results and the economic analysis indicate that the HPD is feasibly used to dry hawthorn cakes.

  1. 21 CFR 73.275 - Dried algae meal.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Dried algae meal. 73.275 Section 73.275 Food and... ADDITIVES EXEMPT FROM CERTIFICATION Foods § 73.275 Dried algae meal. (a) Identity. The color additive dried algae meal is a dried mixture of algae cells (genus Spongiococcum, separated from its culture broth...

  2. Effects of drying conditions on the physicochemical and functional ...

    African Journals Online (AJOL)

    This study aimed to investigate ate the effect of drying conditions (freeze dryingng and hot-air oven drying at 40 and 60°C) onon the physicochemical and functional proper perties of red and yellow-fleshed watermelon rind rind flour. In comparison among the drying proceocesses used in this study, freeze drying method re ...

  3. 21 CFR 160.145 - Dried egg whites.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Dried egg whites. 160.145 Section 160.145 Food and... CONSUMPTION EGGS AND EGG PRODUCTS Requirements for Specific Standardized Eggs and Egg Products § 160.145 Dried egg whites. (a) The food dried egg whites, egg white solids, dried egg albumen, egg albumen solids is...

  4. Feasibility analysis of heat pump dryer to dry hawthorn cake

    International Nuclear Information System (INIS)

    Wang, D.C.; Zhang, G.; Han, Y.P.; Zhang, J.P.; Tian, X.L.

    2011-01-01

    Highlights: → A heat pump dryer (HPD) is effectively proposed to dry hawthorn cake-likely materials. → Low drying temperature and high COP of heat pump are obtained in drying beginning. → HPD is more effective, economic than a traditional hot air dryer. → Feasibility of the HPD is also validated by the operation economy estimation. - Abstract: A heat pump dryer (HPD) would be an economic, environmentally friendly, hygienic drying machine used to dry some food, such as hawthorn cakes. Based on the production process of the hawthorn cake, a HPD is proposed and its basic principle is introduced. The experimental drying curves of the hawthorn cake using the heat pump drying method and the traditional hot air drying method are compared and analyzed. The drying process of hawthorn cakes is similar to that of the other drying materials. The higher drying temperature causes a faster drying process. But in the initial stage of the heat pump drying process, the water content of the hawthorn cake is not sensitive to the drying temperature, so a lower drying air temperature can be available in order to get a higher coefficient of performance (COP) of the heat pump (HP). The experimental results and the economic analysis indicate that the HPD is feasibly used to dry hawthorn cakes.

  5. Short communication Effects of drying procedures on chemical ...

    African Journals Online (AJOL)

    jancik.filip

    2016-12-31

    Dec 31, 2016 ... Another drying procedure included pre-treatment by heating in a ... freeze-drying method and that this procedure is useful for forage analyses and evaluation. ... oven drying (OD) and innovative drying procedures (pre-treatments .... This was probably caused by losses of compounds such as ammonia and.

  6. 7 CFR 58.248 - Nonfat dry milk.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Nonfat dry milk. 58.248 Section 58.248 Agriculture... Products Bearing Usda Official Identification § 58.248 Nonfat dry milk. (a) Nonfat dry milk in commercial....S. Standard Grade. (b) Regular nonfat dry milk in consumer size packages which bears an official...

  7. Quality drying in a hardwood lumber predryer : guidebook--checklist

    Science.gov (United States)

    E. M. Wengert; R. S. Boone

    The IMPROVE Lumber Drying Program is intended to increase awareness of the lumber drying system as a critical component in the manufacture of quality lumber. One objective of the program is to provide easy-to-use tools that a kiln/predryer operator can use to maintain an efficient drying operation and therefore improve lumber drying quality. This report is one...

  8. Designing CAF-adjuvanted dry powder vaccines: spray drying preserves the adjuvant activity of CAF01.

    Science.gov (United States)

    Ingvarsson, Pall Thor; Schmidt, Signe Tandrup; Christensen, Dennis; Larsen, Niels Bent; Hinrichs, Wouter Leonardus Joseph; Andersen, Peter; Rantanen, Jukka; Nielsen, Hanne Mørck; Yang, Mingshi; Foged, Camilla

    2013-05-10

    Dry powder vaccine formulations are highly attractive due to improved storage stability and the possibility for particle engineering, as compared to liquid formulations. However, a prerequisite for formulating vaccines into dry formulations is that their physicochemical and adjuvant properties remain unchanged upon rehydration. Thus, we have identified and optimized the parameters of importance for the design of a spray dried powder formulation of the cationic liposomal adjuvant formulation 01 (CAF01) composed of dimethyldioctadecylammonium (DDA) bromide and trehalose 6,6'-dibehenate (TDB) via spray drying. The optimal excipient to stabilize CAF01 during spray drying and for the design of nanocomposite microparticles was identified among mannitol, lactose and trehalose. Trehalose and lactose were promising stabilizers with respect to preserving liposome size, as compared to mannitol. Trehalose and lactose were in the glassy state upon co-spray drying with the liposomes, whereas mannitol appeared crystalline, suggesting that the ability of the stabilizer to form a glassy matrix around the liposomes is one of the prerequisites for stabilization. Systematic studies on the effect of process parameters suggested that a fast drying rate is essential to avoid phase separation and lipid accumulation at the surface of the microparticles during spray drying. Finally, immunization studies in mice with CAF01 in combination with the tuberculosis antigen Ag85B-ESAT6-Rv2660c (H56) demonstrated that spray drying of CAF01 with trehalose under optimal processing conditions resulted in the preservation of the adjuvant activity in vivo. These data demonstrate the importance of liposome stabilization via optimization of formulation and processing conditions in the engineering of dry powder liposome formulations. Copyright © 2013 Elsevier B.V. All rights reserved.

  9. Aging: A Predisposition to Dry Eyes

    OpenAIRE

    Anushree Sharma; Holly B. Hindman

    2014-01-01

    Dry eye syndrome is a disease of the ocular surface and tear film that is prevalent in older adults. Even though the degree of visual acuity loss in dry eye patients is commonly mild-to-moderate, in the aging population, this minimal change in visual status can lead to a significant decrease in visual function and quality of life. A healthy ocular surface is maintained by appropriate tear production and tear drainage, and deficiencies in this delicate balance can lead to dryness. In the aging...

  10. Dry release of all-polymer structures

    DEFF Research Database (Denmark)

    Haefliger, D.; Nordstrøm, M.; Rasmussen, Peter Andreas

    2005-01-01

    We present a simple dry release technique which uses a thin fluorocarbon film for efficient removal of plastic microdevices from a mould or a handling substrate by reducing the adhesion between the two. This fluorocarbon film is deposited on the substrate in an advanced Si dry etch device utilisi...... 100% were demonstrated on wafer-scale. The fluorocarbon film showed excellent compatibility with metal etch processes and polymer baking and curing steps. It further facilitates demoulding of polydimethylsiloxane stamps suitable for soft-lithography....

  11. Dry and mixed air cooling systems

    International Nuclear Information System (INIS)

    Gutner, Gidali.

    1975-01-01

    The various dry air cooling systems now in use or being developed are classified. The main dimensioning parameters are specified and the main systems already built are given with their characteristics. The available data allow dry air cooling to be situated against the other cooling modes and so specify the aim of the research or currently developed works. Some systems at development stages are briefly described. The interest in mixed cooling (assisted draft) and the principal available systems is analyzed. A program of research is outlined [fr

  12. Self-protection in dry recycle technologies

    International Nuclear Information System (INIS)

    Hannum, W.H.; Wade, D.; Stanford, G.

    1995-01-01

    In response to the INFCE conclusions, the U.S. undertook development of a new dry fuel cycle. Dry recycle processes have been demonstrated to be feasible. Safeguarding such fuel cycles will be dramatically simpler than the PUREX fuel cycle. At every step of the processes, the materials meet the open-quotes spent-fuel standard.close quotes The scale is compatible with collocation of power reactors and their recycle facility, eliminating off-site transportation and storage of plutonium-bearing materials. Material diverted either covertly or overtly would be difficult (relative to material available by other means) to process into weapons feedstock

  13. Keeping quality of imported dried fish

    OpenAIRE

    Goonewardene, I.S.R.; Etoh, S.

    1980-01-01

    All imported salted, dried fish samples tested had a salt content below 30% and above 12% and hence met requirements of the proposed standard. Also samples without quality cut tested had a greater salt content than that with quality cut. This indicates that salt contributes to protecting dried fish and hence may be endorsed by sensory evaluation to a certain extent. Samples with quality cut had more moisture than that without quality cut. But all samples with and without quality cut had a moi...

  14. High speed drying of saturated steam

    International Nuclear Information System (INIS)

    Marty, C.; Peyrelongue, J.P.

    1993-01-01

    This paper describes the development of the drying process for the saturated steam used in the PWR nuclear plant turbines in order to prevent negative effects of water on turbine efficiency, maintenance costs and equipment lifetime. The high speed drying concept is based on rotating the incoming saturated steam in order to separate water which is more denser than the steam; the water film is then extracted through an annular slot. A multicellular modular equipment has been tested. Applications on high and low pressure extraction of various PWR plants are described (Bugey, Loviisa)

  15. Dry blasting decontaminating method for radioactive waste

    International Nuclear Information System (INIS)

    Nishiwaki, Hitoshi.

    1993-01-01

    In the present invention, when abrasives are dry blasted on the surface of radioactive wastes and the recovered abrasives are classified for re-use, abrasives having a microvicker's hardness (HMV) of greater than 600 and a grain size of greater than 1mm are used in a case where the radioactive wastes to be abraded are stainless steels. This enables dry blasting decontamination for stainless steels which has been considered to be impossible. In addition since the amount of secondary wastes are reduced, it is extremely effective. (T.M.)

  16. Annotated Bibliography for Drying Nuclear Fuel

    Energy Technology Data Exchange (ETDEWEB)

    Rebecca E. Smith

    2011-09-01

    Internationally, the nuclear industry is represented by both commercial utilities and research institutions. Over the past two decades many of these entities have had to relocate inventories of spent nuclear fuel from underwater storage to dry storage. These efforts were primarily prompted by two factors: insufficient storage capacity (potentially precipitated by an open-ended nuclear fuel cycle) or deteriorating quality of existing underwater facilities. The intent of developing this bibliography is to assess what issues associated with fuel drying have been identified, to consider where concerns have been satisfactorily addressed, and to recommend where additional research would offer the most value to the commercial industry and the U. S. Department of Energy.

  17. Determinantes del ingreso y del gasto corriente de los hogares

    Directory of Open Access Journals (Sweden)

    Muñoz C., Manuel

    2004-06-01

    Full Text Available Este ensayo de investigación empírica analiza los determinantes del ingreso y del gasto en los hogares colombianos. Utilizando un modelo del ciclo de vida con datos de la encuesta de hogares de 1994 y 1995, muestra que el comportamiento del ingreso está afectado principalmente por las características demográficas del hogar y los rasgos socio ocupacionales de sus miembros. El comportamiento del gasto está determinado ante todo por el ingreso y, en menor medida, por las características sociales del hogar y el gasto de otros hogares con características similares. También examina la influencia de la incertidumbre acerca de los ingresos en el gasto de los hogares para comprobar si estos actúan con motivos de precaución.

  18. Estudio del CH interestelar

    Science.gov (United States)

    Olano, C.; Lemarchand, G.; Sanz, A. J.; Bava, J. A.

    El objetivo principal de este proyecto consiste en el estudio de la distribución y abundancia del CH en nubes interestelares a través de la observación de las líneas hiperfinas del CH en 3,3 GHz. El CH es una molécula de amplia distribución en el espacio interestelar y una de las pocas especies que han sido observadas tanto con técnicas de radio como ópticas. Desde el punto de vista tecnológico se ha desarrollado un cabezal de receptor que permitirá la realización de observaciones polarimétricas en la frecuencia de 3,3 GHz, con una temperatura del sistema de 60 K y un ancho de banda de 140 MHz, y que será instalado en el foco primario de la antena parabólica del IAR. El cabezal del receptor es capaz de detectar señales polarizadas, separando las componentes de polarización circular derecha e izquierda. Para tal fin el cabezal consta de dos ramas receptoras que amplificarán la señal y la trasladarán a una frecuencia más baja (frecuencia intermedia), permitiendo de esa forma un mejor transporte de la señal a la sala de control para su posterior procesamiento. El receptor además de tener características polarimétricas, podrá ser usado en el continuo y en la línea, utilizando las ventajas observacionales y de procesamiento de señal que actualmente posee el IAR.

  19. The influence of lysozyme on mannitol polymorphism in freeze-dried and spray-dried formulations depends on the selection of the drying process.

    Science.gov (United States)

    Grohganz, Holger; Lee, Yan-Ying; Rantanen, Jukka; Yang, Mingshi

    2013-04-15

    Freeze-drying and spray-drying are often applied drying techniques for biopharmaceutical formulations. The formation of different solid forms upon drying is often dependent on the complex interplay between excipient selection and process parameters. The purpose of this study was to investigate the influence of the chosen drying method on the solid state form. Mannitol-lysozyme solutions of 20mg/mL, with the amount of lysozyme varying between 2.5% and 50% (w/w) of total solid content, were freeze-dried and spray-dried, respectively. The resulting solid state of mannitol was analysed by near-infrared spectroscopy in combination with multivariate analysis and further, results were verified with X-ray powder diffraction. It was seen that the prevalence of the mannitol polymorphic form shifted from β-mannitol to δ-mannitol with increasing protein concentration in freeze-dried formulations. In spray-dried formulations an increase in protein concentration resulted in a shift from β-mannitol to α-mannitol. An increase in final drying temperature of the freeze-drying process towards the temperature of the spray-drying process did not lead to significant changes. It can thus be concluded that it is the drying process in itself, rather than the temperature, that leads to the observed solid state changes. Copyright © 2013 Elsevier B.V. All rights reserved.

  20. La pluridimensionalidad del rol del docente hospitalario

    Directory of Open Access Journals (Sweden)

    Marian Serradas Fonseca

    2015-07-01

    Full Text Available Este trabajo es el fruto de la observación y la investigación en la trayectoria personal y profesional de la autora dedicada a la educación de niños y niñas en situación de enfermedad u hospitalización. El objetivo de este ensayo es intentar definir de manera específica, el papel, tareas y competencias que el profesional del ámbito educativo tiene en la atención educativa hospitalaria; haciendo especial énfasis en la importancia de la formación de este profesional abogándose por una preparación que permita brindar una atención educativa de calidad a los niños y niñas en situación de enfermedad u hospitalizados.

  1. Effect of drying method to antioxidants capacity of Limnophila aromatica

    Science.gov (United States)

    Yen, Tran Thi Ngoc; Vu, Nguyen Hoang

    2017-09-01

    Limnophila aromatica is widely used in South East Asian countries to make spices in food and medicine in traditional medicine. The use value of vegetables is known because some of the lesser constituents in plants are called antioxidants. These active ingredients have not been fully researched and their pharmacological effects are underestimated. In this study, the drying temperature at 40 °C was showed that the antioxidant activity decreased the most. The drying temperature of 50 °C is suitable for convection drying method and drying temperature of 60 °C suitable for vacuum drying, as it retains the most antioxidant properties. Regarding the drying method, freeze drying proved to be effective when retaining high antioxidant capacity. Using The convection drying at 50 °C and the vacuum drying at 60 °C, the antioxidant activity of Limnophila aromatica was not different. Over 6 weeks of preservation, the dried product has deterioration in antioxidant properties.

  2. Thin layer modelling of Gelidium sesquipedale solar drying process

    International Nuclear Information System (INIS)

    Ait Mohamed, L.; Ethmane Kane, C.S.; Kouhila, M.; Jamali, A.; Mahrouz, M.; Kechaou, N.

    2008-01-01

    The effect of air temperature and air flow rate on the drying kinetics of Gelidium sesquipedale was investigated in convective solar drying. Drying was conducted at 40, 50 and 60 deg. C. The relative humidity was varied from 50% to 57%, and the drying air flow rate was varied from 0.0277 to 0.0833 m 3 /s. The expression for the drying rate equation is determined empirically from the characteristic drying curve. Thirteen mathematical models of thin layer drying are selected in order to estimate the suitable model for describing the drying curves. The two term model gives the best prediction of the drying curves and satisfactorily describes the drying characteristics of G. sesquipedale with a correlation coefficient R of 0.9999 and chi-square (χ 2 ) of 3.381 x 10 -6

  3. Thin layer modelling of Gelidium sesquipedale solar drying process

    Energy Technology Data Exchange (ETDEWEB)

    Ait Mohamed, L. [Laboratoire d' Energie Solaire et des Plantes Aromatiques et Medicinales, Ecole Normale Superieure, BP 2400, Marrakech (Morocco); Faculte des Sciences Semlalia, BP 2390, Marrakech (Morocco); Ethmane Kane, C.S. [Faculte des Sciences de Tetouan, BP 2121, Tetouan (Morocco); Kouhila, M.; Jamali, A. [Laboratoire d' Energie Solaire et des Plantes Aromatiques et Medicinales, Ecole Normale Superieure, BP 2400, Marrakech (Morocco); Mahrouz, M. [Faculte des Sciences Semlalia, BP 2390, Marrakech (Morocco); Kechaou, N. [Ecole Nationale d' Ingenieurs de Sfax, BPW 3038 (Tunisia)

    2008-05-15

    The effect of air temperature and air flow rate on the drying kinetics of Gelidium sesquipedale was investigated in convective solar drying. Drying was conducted at 40, 50 and 60 C. The relative humidity was varied from 50% to 57%, and the drying air flow rate was varied from 0.0277 to 0.0833 m{sup 3}/s. The expression for the drying rate equation is determined empirically from the characteristic drying curve. Thirteen mathematical models of thin layer drying are selected in order to estimate the suitable model for describing the drying curves. The two term model gives the best prediction of the drying curves and satisfactorily describes the drying characteristics of G. sesquipedale with a correlation coefficient R of 0.9999 and chi-square ({chi}{sup 2}) of 3.381 x 10{sup -6}. (author)

  4. Drying effects on the antioxidant properties of tomatoes and ginger.

    Science.gov (United States)

    Gümüşay, Özlem Aktürk; Borazan, Alev Akpınar; Ercal, Nuran; Demirkol, Omca

    2015-04-15

    In this study, the effects of four different drying processes, sun drying (SD), oven drying (OD), vacuum oven drying (VOD) and freeze drying (FD) for tomatoes (Solanum lycopersicum) and ginger (Zingiber officinale) in terms of thiolic and phenolic contents have been studied. Thiol content, total phenolic content (TPC), ascorbic acid (AA) content, and cupric ion reducing antioxidant capacity (CUPRAC) were determined in fresh and dried samples. Glutathione (GSH) and cysteine (Cys) were determined as the thiol contents of tomatoes and ginger. Significant losses were observed in the contents of TPC, AA, GSH and Cys and CUPRAC values in all samples that were dried using the thermal method. There was a statistically significant difference in the losses of the TPC, AA, and thiol contents between the use of thermal drying and freeze drying (except Cys in tomatoes) methods. Freeze dried tomato and ginger samples have been found to have better antioxidant properties. Copyright © 2014 Elsevier Ltd. All rights reserved.

  5. Ultrasound-Assisted Hot Air Drying of Foods

    Science.gov (United States)

    Mulet, Antonio; Cárcel, Juan Andrés; García-Pérez, José Vicente; Riera, Enrique

    This chapter deals with the application of power ultrasound, also named high-intensity ultrasound, in the hot air drying of foods. The aim of ultrasound-assisted drying is to overcome some of the limitations of traditional convective drying systems, especially by increasing drying rate without reducing quality attributes. The effects of ultrasound on drying rate are responsible for some of the phenomena produced in the internal and/or external resistance to mass transfer.

  6. Infrared pre-drying and dry-dehulling of walnuts for improved processing efficiency and product quality

    Science.gov (United States)

    The walnut industry is faced with an urgent need to improve post-harvest processing efficiency, particularly drying and dehulling operations. This research investigated the feasibility of dry-dehulling and infrared (IR) pre-drying of walnuts for improved processing efficiency and dried product quali...

  7. Evaluation of treatment for dry eye with 2-hydroxyestradiol using a dry eye rat model.

    Science.gov (United States)

    Higuchi, Akihiro; Oonishi, Erina; Kawakita, Tetsuya; Tsubota, Kazuo

    2016-01-01

    2-hydroxy estradiol (2-OHE2) is a catechol derivative of 17β -Estradiol (E2) and it is synthesized from E2 catalyzed by cytochrome P4501A1. Previous studies reported that 2-OHE2 is a physiologic antioxidant in lipoproteins, liver microsomes, and the brain. Catechol derivatives show an anti-inflammatory effect through the inhibition of prostaglandin endoperoxide synthase (PGS) activity. Corneal erosion caused by dry eye is related to an increase in oxidative stress and inflammation in ocular surface cells. We investigated the therapeutic effects of 2-OHE2 on corneal damage caused by dry eye. Steroidal radical scavenging activity was confirmed through the electron spin resonance (ESR) method. PGS activity was measured using the COX Fluorescent Activity Assay Kit. To evaluate the effect of 2-OHE2 on the treatment for dry eye, 2-OHE2 was applied as an eye drop experiment using dry eye model rats. 2-OHE2 scavenged tyrosyl radical and possibly suppressed oxidative stress in corneal epithelial cells. In addition, 2-OHE2 inhibited PGS activity, and 2-OHE2 is probably a competitive inhibitor of PGS. Corneal PGS activity was upregulated in the dry eye group. Therefore, 2-OHE2 eye drops improved corneal erosion in dry eye model rats. 2-OHE2 is a candidate for the treatment of dry eye through the suppression of inflammation and oxidative stress in the cornea.

  8. Effect of microwave freeze drying on quality and energy supply in drying of barley grass.

    Science.gov (United States)

    Cao, Xiaohuang; Zhang, Min; Mujumdar, Arun S; Zhong, Qifeng; Wang, Zhushang

    2018-03-01

    Young barley grass leaves are well-known for containing the antioxidant substances flavonoid and chlorophyll. However, low product quality and energy efficiency exist with respect to the dehydration of barley grass leaves. To improve energy supply and the quality of barley grass, microwave heating instead of contact heat was applied for the freeze drying of barley grass at a pilot scale at 1, 1.5 and 2 W g -1 , respectively; After drying, energy supply and quality parameters of color, moisture content, chlorophyll, flavonoids, odors of dried barley grass were determined to evaluate the feasibility of the study. Microwave freeze drying (MFD) allowed a low energy supply and high contents of chlorophyll and flavonoids. A lightness value of 60.0, a green value of -11.5 and an energy supply of 0.61 kW h -1  g -1 were observed in 1.5 W g -1 MFD; whereas drying time (7 h) decreased by 42% compared to contact heating. Maximum content of flavonoid and chlorophyll was 11.7 and 12.8 g kg -1 barley grass. Microwave heating leads to an odor change larger than that for contact heating observed for the freeze drying of barley grass. MFD retains chlorophyll and flavonoids, as well as colors and odors of samples, and also decreases energy consumption in the freeze drying of barley grass. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  9. TG-DSC method applied to drying characteristics of areca inflorescence during drying

    Science.gov (United States)

    Song, Fei; Wang, Hui; Huang, Yulin; Zhang, Yufeng; Chen, Weijun; Zhao, Songlin; Zhang, Ming

    2017-10-01

    In this study, suitability of eight drying models available in literature on defining drying characteristics of areca inflorescence has been examined by non-linear regression analysis using the Statistic Computer Program. The coefficient of determination ( R 2 ) and the reduced chi-square (χ2) are used as indicators to evaluate the best suitable model. According to the results, the Verma et al. model gave the best results for explaining the drying characteristics of areca inflorescence. The drying process could be divided into three periods: rising rate, constant rate and the falling rate period. Fick's second law can describe the moisture transport during the food drying process that takes place in the falling rate period. The values of effective diffusivity during the drying of areca inflorescence ranged from 2.756 × 10-7 to 6.257 × 10-7 m2/s and the activation energy was tested for 35.535 kJ/mol. The heat requirement of areca inflorescence at 40-60 °C was calculated from 50.57 to 60.50 kJ/kg during the drying process.

  10. 21 CFR 160.105 - Dried eggs.

    Science.gov (United States)

    2010-04-01

    ...) Enzyme procedure. A glucose-oxidase-catalase preparation and hydrogen peroxide solution are added to the... glucose content of the liquid eggs. The glucose-oxidase-catalase preparation used is one that is generally... powdered. Before drying, the glucose content of the liquid eggs may be reduced by one of the optional...

  11. Dry friction damping couple at high frequencies

    Czech Academy of Sciences Publication Activity Database

    Půst, Ladislav; Pešek, Luděk; Košina, Jan; Radolfová, Alena

    2014-01-01

    Roč. 8, č. 1 (2014), s. 91-100 ISSN 1802-680X Institutional support: RVO:61388998 Keywords : dry friction * damping * high frequencies Subject RIV: BI - Acoustics http://www.kme.zcu.cz/acm/acm/article/view/239/265

  12. Drying characteristics and engineering properties of fermented ...

    African Journals Online (AJOL)

    The effect of variety on the drying and engineering properties of fermented ground cassava was studied in order to generate data for design and optimum performance of various dryers used in cassava processing. This research attempts to provide data on the engineering properties such as moisture content, specific heat ...

  13. Dry eyes : a commonly missed eye condition

    OpenAIRE

    Vella, Mario;

    2014-01-01

    Tears are an important component in providing moisture and lubrication for the eyes, thereby maintaining vision and comfort. Dry eyes (keratoconjunctivitis sicca) result when there is either decreased production of tears or by poor tear quality which in turn lead to more rapid evaporation.

  14. Rehydration kinetics of freeze-dried carrots

    NARCIS (Netherlands)

    Vergeldt, F.J.; Dalen, van G.; Duijster, A.J.; Voda, A.; Khalloufi, S.; Vliet, van L.J.; As, van H.; Duynhoven, van J.P.M.; Sman, van der R.G.M.

    2014-01-01

    Rehydration kinetics by two modes of imbibition is studied in pieces of freeze-dried winter carrot, after different thermal pre-treatments. Water ingress at room temperature is measured in real time by in situ MRI and NMR relaxometry. Blanched samples rehydrate substantially faster compared to

  15. Solar-energy drying systems. A review

    Energy Technology Data Exchange (ETDEWEB)

    Sharma, Atul; Chen, C.R.; Vu Lan, Nguyen [Department of Mechanical Engineering, Kun Shan University, 949, Da-Wan Road, Yung-Kang City, Tainan Hsien 71003 (China)

    2009-08-15

    In many countries of the world, the use of solar thermal systems in the agricultural area to conserve vegetables, fruits, coffee and other crops has shown to be practical, economical and the responsible approach environmentally. Solar heating systems to dry food and other crops can improve the quality of the product, while reducing wasted produce and traditional fuels - thus improving the quality of life, however the availability of good information is lacking in many of the countries where solar food processing systems are most needed. Solar food dryers are available in a range of size and design and are used for drying various food products. It is found that various types of driers are available to suit the needs of farmers. Therefore, selection of dryers for a particular application is largely a decision based on what is available and the types of dryers currently used widely. A comprehensive review of the various designs, details of construction and operational principles of the wide variety of practically realized designs of solar-energy drying systems reported previously is presented. A systematic approach for the classification of solar-energy dryers has been evolved. Two generic groups of solar-energy dryers can be identified, viz. passive or natural-circulation solar-energy dryers and active or forced-convection solar-energy dryers. Some very recent developments in solar drying technology are highlighted. (author)

  16. Dry eye syndrome among computer users

    Science.gov (United States)

    Gajta, Aurora; Turkoanje, Daniela; Malaescu, Iosif; Marin, Catalin-Nicolae; Koos, Marie-Jeanne; Jelicic, Biljana; Milutinovic, Vuk

    2015-12-01

    Dry eye syndrome is characterized by eye irritation due to changes of the tear film. Symptoms include itching, foreign body sensations, mucous discharge and transitory vision blurring. Less occurring symptoms include photophobia and eye tiredness. Aim of the work was to determine the quality of the tear film and ocular dryness potential risk in persons who spend more than 8 hours using computers and possible correlations between severity of symptoms (dry eyes symptoms anamnesis) and clinical signs assessed by: Schirmer test I, TBUT (Tears break-up time), TFT (Tear ferning test). The results show that subjects using computer have significantly shorter TBUT (less than 5 s for 56 % of subjects and less than 10 s for 37 % of subjects), TFT type II/III in 50 % of subjects and type III 31% of subjects was found when compared to computer non users (TFT type I and II was present in 85,71% of subjects). Visual display terminal use, more than 8 hours daily, has been identified as a significant risk factor for dry eye. It's been advised to all persons who spend substantial time using computers to use artificial tears drops in order to minimize the symptoms of dry eyes syndrome and prevents serious complications.

  17. Specialist report : Dry eye disease and aging

    NARCIS (Netherlands)

    van Tilborg, M.M.A.; Kort, H.S.M.; Murphy, P.J.

    2017-01-01

    The common ocular pathologies relating to the aging eye, such as cataract, diabetic retinopathy, glaucoma, or macular degeneration, are all known to reduce visual functioning. Less wellknown is the effect of common, age-related dry eye disease (DED). The impact of DED on daily activities can be

  18. Oral antioxidant therapy for marginal dry eye.

    Science.gov (United States)

    Blades, K J; Patel, S; Aidoo, K E

    2001-07-01

    To assess the efficacy of an orally administered antioxidant dietary supplement for managing marginal dry eye. A prospective, randomised, placebo controlled trial with cross-over. Eye Clinic, Department of Vision Sciences, Glasgow Caledonian University. Forty marginal dry eye sufferers composed of 30 females and 10 males (median age 53 y; range 38-69 y). Baseline assessments were made of tear volume sufficiency (thread test), tear quality (stability), ocular surface status (conjunctival impression cytology) and dry eye symptoms (questionnaire). Each subject was administered courses of active treatment, placebo and no treatment, in random order for 1 month each and results compared to baseline. Tear stability and ocular surface status were significantly improved following active treatment (Ptreatment (P>0.05). Absolute increase in tear stability correlated with absolute change in goblet cell population density. Tear volume was not improved following any treatment period and dry eye symptom responses were subject to placebo effect. Oral antioxidants improved both tear stability and conjunctival health, although it is not yet understood whether increased ocular surface health mediates increased tear stability or vice versa. This study was supported by a PhD scholarship funded by the Department of Vision Sciences, Glasgow Caledonian University, Scotland. Antioxidant supplements and placebos were kindly donated by Vitabiotics.

  19. New atomization nozzle for spray drying

    NARCIS (Netherlands)

    Deventer, H.C. van; Houben, R.J.; Koldeweij, R.B.J.

    2013-01-01

    A new atomization nozzle based on ink jet technology is introduced for spray drying. Application areas are the food and dairy industry, in the first instance, because in these industries the quality demands on the final powders are high with respect to heat load, powder shape, and size distribution.

  20. Physical properties of sunflower seeds during drying

    Directory of Open Access Journals (Sweden)

    Thaís Adriana de Souza Smaniotto

    2017-03-01

    Full Text Available The aim of this work was to determine the effect that the moisture content has on the physical properties of sunflower seeds. The cultivar Olisun 3, with an initial moisture content of 34.1 (% wb, was used and then subjected to drying in an oven with forced air ventilation under three temperature conditions: 40, 60 and 80 °C. The reduction in the moisture content during drying was monitored by the gravimetric method until it reached a final moisture content of 8.0 ± 1.0 (% wb. The physical properties were analysed: the bulk density, true density, intergranular porosity and volumetric shrinkage of the mass and unit and terminal velocity. The reduction in the moisture content influenced the physical properties of sunflower seeds and caused a decrease in the intergranular porosity, bulk density and true density at all examined temperatures. The mass and volumetric contractions of the unit and reduction in shrinkage rates all increased with the drying of sunflower seeds at all studied temperatures. The terminal velocity increased as the moisture content of the grains increased, which was more evident at the drying temperature of 80 °C.