WorldWideScience

Sample records for double in-situ fibrous

  1. Fluorescence in situ hybridization and molecular studies in infertile men with dysplasia of the fibrous sheath.

    Science.gov (United States)

    Baccetti, Baccio; Collodel, Giulia; Gambera, Laura; Moretti, Elena; Serafini, Francesca; Piomboni, Paola

    2005-07-01

    To perform fluorescence in situ hybridization (FISH) and molecular analysis in patients with the genetic sperm defect "dysplasia of the fibrous sheath" (DFS). Retrospective study. Regional Referral Center for Male Infertility, Siena, Italy. Twelve infertile patients with DFS sperm defects. Family history, lymphocytic karyotype, physical and hormonal assays, semen analysis. The DFS sperm phenotype was defined by light, fluorescent, and electron microscopy. Sperm chromosomal constitution was examined by FISH. Gene deletions were tested by polymerase chain reaction. The genetic sperm defect DFS was determined by transmission and scanning electron microscopy. Immunofluorescence staining of A-kinase anchoring protein 4 (AKAP4) showed a moderate and diffuse signal, revealing a disorganized and incompletely assembled fibrous sheath. In 11 of 12 DFS patients, polymerase chain reaction for detecting the presence of partial sequence of AKAP4/AKAP3 binding regions gave positive results. Fluorescence in situ hybridization was performed in decondensed sperm nuclei with probes for chromosomes 18, X, and Y. The mean disomy frequency of chromosome 18 was in the normal range, whereas the mean disomy frequencies of sex chromosomes and diploidies were twice those of controls. These results should be considered when DFS sperm are used in assisted reproductive technology, owing to the high risk of transmission of chromosomal unbalance and of DFS sperm defects to male offspring.

  2. In situ degradability of dry matter and fibrous fraction of sorghum silage

    Directory of Open Access Journals (Sweden)

    Renê Ferreira Costa

    2016-05-01

    Full Text Available This study aimed to evaluate in situ degradability and degradation kinetics of DM, NDF and ADF of silage, with or without tannin in the grains. Two isogenic lines of grain sorghum (CMS-XS 114 with tannin and CMS-XS 165 without tannin and two sorghum hybrids (BR-700 dual purpose with tannin and BR-601 forage without tannin were ensiled; dried and ground silage samples were placed in nylon bags and introduced through the fistulas. After incubation for 6, 12, 24, 48, 72 and 96 hours, bags were taken for subsequent analysis of fibrous fractions. The experimental design was completely randomized with 4 replicates and 4 treatments and means compared by Tukey’s test at 5% probability. As for the DM degradation rate, silage of CMSXS165without tannin was superior. Silages of genotypes BR700 and CMSXS 114 with tannin showed the highest values of indigestible ADF (59.54 and 43.09%. Regarding the NDF, the potential degradation of silage of CMSXS165 line without tannin was superior. Tannin can reduce ruminal degradability of the dry matter and fibrous fractions.

  3. Technical note: Relationship between in situ NDF degradability and enzymatic NDF hydrolysis in forages, nonforage fibrous feeds, and crop residues.

    Science.gov (United States)

    Gallo, A; Giuberti, G; Bruschi, S; Fortunati, P; Masoero, F

    2017-09-01

    The study was performed on forages ( = 8), nonforage fibrous feeds ( = 10), and crop residues ( = 2). Samples were characterized for in situ NDF degradability (NDFD) at 6, 12, 18, 24, 30, 36, 48, 72, 96, 120, and 240 h of ruminal incubation. Then, samples were characterized for enzymatic NDFD by adopting a multistep enzymatic method consisting of a preincubation (PreInc) phase followed by enzymatic incubation (EnzInc) steps. In the PreInc phase, samples were incubated in a NaOH solution for 0, 30, 60, or 90 min. Then, in the EnzInc phase, samples were first incubated in a buffered enzymatic solution containing hemicellulase, cellulase, and Viscozyme L enzymes. Then, samples were incubated in a xylanase-buffered enzymatic solution. These 2-step EnzInc lasted for a total of 16 (8 h for the first enzymatic step + 8 h for the second enzymatic step), 32 (16 + 16 h), or 48 h (24 + 24 h). The enzymatic NDFD coefficients were increased by increasing both PreInc and EnzInc incubation times, and no PreInc × EnzInc interaction was observed, except for ryegrass hay. On average, enzymatic NDFD increased ( 0.80, forage types or nonforage fibrous feeds.

  4. Estimates of in situ digestibility and fibrous compounds in feeds for ruminants

    Directory of Open Access Journals (Sweden)

    Frank Akiyoshi Kuwahara

    2015-08-01

    Full Text Available Current paper assesses the relationship between in situ incubation time, particle size and types of materials on estimates of indigestible fractions of dry matter (iDM and neutral detergent fiber (iNDF in cattle feed and feces. Samples of soybean meal, alfalfa and feces of cattle fed on high concentrated diets were analyzed. The samples were processed in a Wiley mill, with 0.5 and 1.5 mm porosity for food and 1.5 mm for feces, which were packed in 4 × 5 cm F57 bags (Ankon® and nonwoven fabric (100 g m-2 of two brands. The material was divided into two groups, with and without treatment with acetone, and five replications. Samples of each group were incubated in the rumen of a multiparous cow adapted to a 70:30 diet, forage:concentrate diet, for 240 hours. The iDM and iNDF levels were evaluated sequentially to interpret the percentages of undigested material. Data underwent analysis of variance (ANOVA, p < 0.05 and means were compared by Tukey’s test (p < 0.05. Material, size of particles and incubated material affected iDM and iNDF estimates.

  5. Automated brightfield dual-color in situ hybridization for detection of mouse double minute 2 gene amplification in sarcomas.

    Science.gov (United States)

    Zhang, Wenjun; McElhinny, Abigail; Nielsen, Alma; Wang, Maria; Miller, Melanie; Singh, Shalini; Rueger, Ruediger; Rubin, Brian P; Wang, Zhen; Tubbs, Raymond R; Nagle, Raymond B; Roche, Pat; Wu, Ping; Pestic-Dragovich, Lidija

    2011-01-01

    The human homolog of the mouse double minute 2 (MDM2) oncogene is amplified in about 20% of sarcomas. The measurement of the MDM2 amplification can aid in classification and may provide a predictive value for recently formulated therapies targeting MDM2. We have developed and validated an automated bright field dual-color in situ hybridization application to detect MDM2 gene amplification. A repeat-depleted MDM2 probe was constructed to target the MDM2 gene region at 12q15. A chromosome 12-specific probe (CHR12) was generated from a pα12H8 plasmid. The in situ hybridization assay was developed by using a dinitrophenyl-labeled MDM2 probe and a digoxigenin-labeled CHR12 probe on the Ventana Medical Systems' automated slide-staining platforms. The specificity of the MDM2 and CHR12 probes was shown on metaphase spreads and further validated against controls, including normal human tonsil and known MDM2-amplified samples. The assay performance was evaluated on a cohort of 100 formalin-fixed, paraffin-embedded specimens by using a conventional bright field microscope. Simultaneous hybridization and signal detection for MDM2 and CHR12 showed that both DNA targets were present in the same cells. One hundred soft tissue specimens were stained for MDM2 and CHR12. Although 26 of 29 lipomas were nonamplified and eusomic, MDM2 amplification was noted in 78% of atypical lipomatous tumors or well-differentiated liposarcomas. Five of 6 dedifferentiated liposarcoma cases were amplified for MDM2. MDM2 amplification was observed in 1 of 8 osteosarcomas; 3 showed CHR12 aneusomy. MDM2 amplification was present in 1 of 4 chondrosarcomas. Nine of 10 synovial sarcomas displayed no evidence of MDM2 amplification in most tumor cells. In pleomorphic sarcoma, not otherwise specified (pleomorphic malignant fibrous histiocytoma), MDM2 was amplified in 38% of cases, whereas 92% were aneusomic for CHR12. One alveolar rhabdomyosarcoma and 2 embryonal rhabdomyosarcomas displayed low-level aneusomy

  6. Establishment of a new human pleomorphic malignant fibrous histiocytoma cell line, FU-MFH-2: molecular cytogenetic characterization by multicolor fluorescence in situ hybridization and comparative genomic hybridization

    Directory of Open Access Journals (Sweden)

    Isayama Teruto

    2010-11-01

    Full Text Available Abstract Background Pleomorphic malignant fibrous histiocytoma (MFH is one of the most frequent malignant soft tissue tumors in adults. Despite the considerable amount of research on MFH cell lines, their characterization at a molecular cytogenetic level has not been extensively analyzed. Methods and results We established a new permanent human cell line, FU-MFH-2, from a metastatic pleomorphic MFH of a 72-year-old Japanese man, and applied multicolor fluorescence in situ hybridization (M-FISH, Urovysion™ FISH, and comparative genomic hybridization (CGH for the characterization of chromosomal aberrations. FU-MFH-2 cells were spindle or polygonal in shape with oval nuclei, and were successfully maintained in vitro for over 80 passages. The histological features of heterotransplanted tumors in severe combined immunodeficiency mice were essentially the same as those of the original tumor. Cytogenetic and M-FISH analyses displayed a hypotriploid karyotype with numerous structural aberrations. Urovysion™ FISH revealed a homozygous deletion of the p16INK4A locus on chromosome band 9p21. CGH analysis showed a high-level amplification of 9q31-q34, gains of 1p12-p34.3, 2p21, 2q11.2-q21, 3p, 4p, 6q22-qter, 8p11.2, 8q11.2-q21.1, 9q21-qter, 11q13, 12q24, 15q21-qter, 16p13, 17, 20, and X, and losses of 1q43-qter, 4q32-qter, 5q14-q23, 7q32-qter, 8p21-pter, 8q23, 9p21-pter, 10p11.2-p13, and 10q11.2-q22. Conclusion The FU-MFH-2 cell line will be a particularly useful model for studying molecular pathogenesis of human pleomorphic MFH.

  7. Double-staining chromogenic in situ hybridization as a useful alternative to split-signal fluorescence in situ hybridization in lymphoma diagnostics

    DEFF Research Database (Denmark)

    van Rijk, A.; Svenstroup-Poulsen, T.; Jones, M.

    2010-01-01

    , their detection is an important adjunct for increasing the reliability of the diagnosis. Recently, split-signal fluorescence hi situ hybridization has become available as a robust method to detect chromosomal breaks in paraffin-embedded formalin-fixed tissues. A bright field approach would bring this technology...... within the reach of every pathology laboratory. Design and Methods Our study was initiated to determine the consistency between chromogenic in situ hybridization and fluorescence in situ hybridization, both using split-signal probes developed for the detection of chromosomal breaks. Five hundred...... and forty cases of I I lymphoma entities and reactive, benign lymphoid tissues, collected from eight different pathology laboratories, placed on 1.5 fluorescence in situ hybridization pre-stained tissue microarray slides, were double stained for the chromogenic hybridization. For each core morphology...

  8. In Situ Potassium-Argon Geochronology Using Fluxed Fusion and a Double Spike

    Science.gov (United States)

    Hurowitz, Joel A.; Hecht, Michael H.; Zimmerman, Wayne F.; Neidholdt, Evan L.; Sinha, Mahadeva P.; Sturhahn, Wolfgang; Coleman, Max; McCleese, Daniel J.; Farley, Kenneth A.; Eiler, John M.; hide

    2012-01-01

    A document highlights an Li-based fluxing agent that enables sample fusion and quantitative Ar-release at relatively low temperatures (900-1,000 C), readily achievable with current flight resistance furnace designs. A solid, double spike containing known quantities of Ar-39 and K-41 was developed that, when added in known amounts to a sample, enables the extraction of a Ar-40/K-40 ratio for age estimation without a sample mass measurement. The use of a combination of a flux and a double spike as a means of solving the mechanical hurdles to an in situ K-Ar geochronology measurement has never been proposed before. This methodology and instrument design would provide a capability for assessing the ages of rocks and minerals on the surfaces of planets and other rocky terrestrial bodies in the solar system.

  9. Poly I-lactide-layered double hydroxide nanocomposites via in situ polymerization of I-lactide

    DEFF Research Database (Denmark)

    Katiyar, Vimal; Gerds, N.; Koch, C.B.

    2010-01-01

    The use of clay nanofillers offers a potential route to improved barrier properties in polylactide films. Magnesium–aluminium layered double hydroxides (LDHs) are interesting in this respect and we therefore explored synthesis of PLA-LDH nanocomposites by ring-opening polymerization. This method...... is attractive because it should ensure good dispersion of LDH in the polymer. The effect of adding either LDH carbonate (LDH-CO3) or laurate-modified LDH (LDH-C12) was investigated. X-ray diffraction, scanning electron microscopy, and transmission electron microscopy revealed that exfoliated nanocomposites were...... weight was significantly reduced when in-situ polymerization was conducted in the presence of the LDHs and we suggest that chain termination via LDH surface hydroxyl groups and/or metal-catalyzed degradation could be responsible....

  10. Polymethyl methacrylate and polystyrene with layered double hydroxide nano composites: In situ synthesis, morphology and thermal properties

    International Nuclear Information System (INIS)

    Botan, Rodrigo; Nogueira, Telma R.; Lona, Liliane M.F.; Wypych, Fernando

    2011-01-01

    Over the past decade, polymer nanocomposites have attracted interest, both in industry and in academia, because they often exhibit remarkable improvement in their properties when compared with pure polymer or conventional micro and macro-composites using low levels of reinforcements. In this work polymethyl methacrylate and polystyrene reinforced with layered double hydroxide, which was intercalated with sodium dodecyl sulfate were synthesized by in situ bulk polymerization. The nanocomposites were characterized and compared by X-ray diffraction, thermogravimetric analysis and flammability test. The X-ray diffraction demonstrated that synthesized nanocomposites showed a high global dispersion of layered double hydroxide, suggesting exfoliated morphology. The result of thermogravimetric analysis and flammability test for synthesized polystyrene/ layered double hydroxide nanocomposite presented a significant improvement in thermal stability and flammability property when compared with pure polymer. (author)

  11. Double forced sling by combining in situ vaginal wall and Infast pubic bone suburethral stabilization techniques: a new method.

    Science.gov (United States)

    Kayigil, Onder; Biri, Aydan

    2002-06-01

    We evaluated the results and effectiveness of the double forced sling by combining in situ vaginal wall and Infast (Influence, Inc., San Francisco, California) pubic bone suburethral stabilization techniques as a new method. The new technique was used in 40 patients, of whom 32 completed 2 years of followup. Previous surgery included hysterectomy in 8 cases, anterior and posterior vaginal wall repair in 6, and 1 or 2 incontinence procedures in 24. Types 2, 3 and mixed incontinence were diagnosed in 12, 12 and 8 patients, respectively. With this technique a gelatin coated synthetic sling was fixed to the previously prepared vaginal sling surface with watertight stitches to create a doubled forced sling, which was fixed to the pubic bone with 2 screws using an Infast inserter. Patient outcomes were evaluated by questionnaire analysis and the pad test. The cure, improvement and failure rates were 81.25%, 6.25% and 12.5% in the 32 patients who completed 2 years of followup. Surprisingly successful results were achieved in all 24 secondary cases. Moderate cystocele in 4 patients and rectocele in 8 were corrected simultaneously. Temporary urinary retention in 4 patients resolved in 2 weeks. Of the 32 patients 28 reported that they would repeat the procedure and recommend it to others. The double forced sling has 2 advantages that make it superior to other techniques, namely a minimal complication rate and enhanced support accomplished by an easy and noninvasive technique.

  12. Synthesis and in situ mechanism of nuclei growth of layered double ...

    Indian Academy of Sciences (India)

    A host–guest material such as layered double hydroxide (LDH) has generated immense interest in current research due to its technological importance, whereby its dimension significantly affect its mechanical and other physical properties. The purpose of this study was to prepare Mg/Al-LDHs by systematically varying the ...

  13. In situ oligomerization of 2-(thiophen-3-yl)acetate intercalated into Zn{sub 2}Al layered double hydroxide

    Energy Technology Data Exchange (ETDEWEB)

    Tronto, Jairo, E-mail: jairotronto@ufv.br [Universidade Federal de Viçosa, Instituto de Ciências Exatas e Tecnológicas, Campus de Rio Parsanaíba, Rodovia BR 354 km 310, Cx. Postal 22, CEP, 38.810-000 Rio Paranaíba, MG (Brazil); Pinto, Frederico G.; Costa, Liovando M. da [Universidade Federal de Viçosa, Instituto de Ciências Exatas e Tecnológicas, Campus de Rio Parsanaíba, Rodovia BR 354 km 310, Cx. Postal 22, CEP, 38.810-000 Rio Paranaíba, MG (Brazil); Leroux, Fabrice; Dubois, Marc [Clermont Université, Université Blaise Pascal, Institut de Chimie de Clermont-Ferrand, BP 10448, F-63000 Clermont-Ferrand (France); CNRS, UMR 6296, ICCF, BP 80026, F-6317 Clermont-Ferrand (France); Valim, João B. [Universidade de São Paulo, Faculdade de Filosofia Ciências e Letras de Ribeirão Preto, Departamento de Química, Av. dos Bandeirantes 3900, CEP 14.040-901, Ribeirão Preto, SP (Brazil)

    2015-01-15

    A layered double hydroxide (LDH) with cation composition Zn{sub 2}Al was intercalated with 2-(thiophen-3-yl)acetate (3-TA) monomers. To achieve in situ polymerization and/or oligomerization of the intercalated monomers, soft thermal treatments were carried out, and subsequent hybrid LDH materials were analyzed by means of several characterization techniques using powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), {sup 13}C CP–MAS nuclear magnetic resonance (NMR), electron spin resonance (EPR), scanning electron microscopy (SEM), and transmission electron microscopy (TEM), inductively coupled plasma optical emission spectroscopy (ICP–OES), and elemental analysis. PXRD analysis suggested that the intercalated monomers formed a bilayer. Thermal treatment of the hybrid LDH assembly above 120 °C provokes partially the breakdown of the layered structure, generating the phase zincite. EPR results indicated that vicinal monomers (oligomerization) were bound to each other after hydrothermal or thermal treatment, leading to a polaron response characteristic of electron conductivity localized on a restricted number of thiophene-based monomer segments. Localized unpaired electrons exist in the material and interact with the {sup 27}Al nuclei of the LDH layers by superhyperfine coupling. These unpaired electrons also interact with the surface of ZnO (O{sup 2−} vacancies), formed during the thermal treatments. - Graphical abstract: We synthesized a layered double hydroxide (LDH) with cation composition Zn{sub 2}Al, intercalated with 2-(thiophen-3-yl)acetate (3-TA) monomers, by coprecipitation at constant pH. We thermally treated the material, to achieve in situ polymerization and/or oligomerization of the intercalated monomers. - Highlights: • A Zn{sub 2}Al–LDH was intercalated with 2-(thiophen-3-yl)acetate monomers. • To achieve in situ oligomerization of the monomers, thermal treatments were made.

  14. Tunable Properties of Exfoliated Polyvinylalcohol Nanocomposites by In Situ Coprecipitation of Layered Double Hydroxides

    Science.gov (United States)

    Liu, Jiajia; Yuen, Richard K. K.; Hu, Yuan

    2017-10-01

    Poly(vinyl alcohol) (PVA) nanocomposites were prepared by a “one step” method based on the coprecipitation of layered double hydroxide (LDH) nanosheets in the polymer aqueous solution. The morphology, fire resistance properties, mechanical and optical properties of the PVA/LDH nanocomposites were studied. The LDH nanosheets were homogeneously dispersed in the PVA matrix as indicated by X-ray diffraction (XRD) pattern and transmission electron microscopy (TEM) characterization. Meanwhile, the peak of heat release rate (pHRR) and total heat release (THR) were decreased by 58% and 28%, respectively. Storage modulus at 30 °C was increased, and the transmittance of more than 90% at the visible region was obtained upon addition of 5 wt% LDH.

  15. Layered double hydroxides as fillers in poly(l-lactide nanocomposites, obtained by in situ bulk polymerization

    Directory of Open Access Journals (Sweden)

    Telma Nogueira

    Full Text Available Abstract In this study in situ bulk polymerization of L-lactide filled with layered double hydroxides (LDH was investigated. Four different LDHs intercalated with two different organic anions (salicylate and sebacate were synthesized and characterized. After characterization, these synthetic layered compounds were used as fillers in poly(L-lactide (PLLA nanocomposites with two different fillers’s loadings (1 wt% and 2 wt%. PLLA and PLLA nanocomposites were evaluated by X-ray diffraction (XRD, Fourier transform infrared spectroscopy (FTIR, ultraviolet and visible spectroscopy, thermogravimetric analysis (TGA, dynamical mechanical analysis (DMA, flexural testing and differential scanning calorimetry (DSC. The results demonstrated that, compared to PLLA, the nanocomposite containing 1 wt% of Zn/Al salicylate transmitted less UVA and UVB light, while keeping a similar transparency in the visible region. Thermogravimetric analysis revealed that the nanocomposite with 1 wt% of Zn/Al salicylate exhibited the highest thermal stability. In general the flexural and dynamical mechanical properties were reduced in compassion to neat PLLA. DSC results, demonstrated that, compared to PLLA, all the nanocomposites exhibited lower glass transition temperature and melting temperature values.

  16. Preparation and Mechanical Properties of Layered Double Hydrotalcides/ /Polystyrene Nanocomposites Prepared by an in-situ Bubble Stretching Method

    Directory of Open Access Journals (Sweden)

    Xiu-ting ZHENG

    2014-12-01

    Full Text Available Layered double hydrotalcides/polystyrene (LDHs/PS nanocomposites were produced by an in-situ bubble stretching (ISBS method and simple shear method; the effect of LHDs content on the dispersion and the mechanical properties of nanocomposites was studied. The field emission scanning electron microscopy (FE-SEM images indicated that the ISBS method leads to a high degree of dispersion of LDHs nanoparticles in PS matrix. Furthermore, it did not form a significant re-aggregation after defoaming by means of twin-screw extruder. Compared with the simple shear method, the un-notched impact strength and tensile strength of nanocomposites prepared by ISBS method were higher at the same amount of LDHs. The un-notched impact strength of the nanocomposites prepared by ISBS method reached a maximum value at the LDHs mass fraction of 5 % , the strength increased is 57.29 % greater than that of pure PS. The enhanced mechanical properties attributed to the effective dispersion of nanoscale LDHs by ISBS method. DOI: http://dx.doi.org/10.5755/j01.ms.20.4.6197

  17. A Double-Smoothing Algorithm for Integrating Satellite Precipitation Products in Areas with Sparsely Distributed In Situ Networks

    Directory of Open Access Journals (Sweden)

    Shuoben Bi

    2017-01-01

    Full Text Available The spatial distribution of automatic weather stations in regions of western China (e.g., Tibet and southern Xingjiang is relatively sparse. Due to the considerable spatial variability of precipitation, estimations of rainfall that are interpolated in these areas exhibit considerable uncertainty based on the current observational networks. In this paper, a new statistical method for estimating precipitation is introduced that integrates satellite products and in situ observation data. This method calculates the differences between raster data and point data based on the theory of data assimilation. In regions in which the spatial distribution of automatic weather stations is sparse, a nonparametric kernel-smoothing method is adopted to process the discontinuous data through correction and spatial interpolation. A comparative analysis of the fusion method based on the double-smoothing algorithm proposed here indicated that the method performed better than those used in previous studies based on the average deviation, root mean square error, and correlation coefficient values. Our results indicate that the proposed method is more rational and effective in terms of both the efficiency coefficient and the spatial distribution of the deviations.

  18. Polymethyl methacrylate and polystyrene with layered double hydroxide nano composites: In situ synthesis, morphology and thermal properties; Nanocompositos de polimetacrilato de metila e poliestireno com hidroxido duplo lamelar: sintese in situ, morfologia e propriedades termicas

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    Over the past decade, polymer nanocomposites have attracted interest, both in industry and in academia, because they often exhibit remarkable improvement in their properties when compared with pure polymer or conventional micro and macro-composites using low levels of reinforcements. In this work polymethyl methacrylate and polystyrene reinforced with layered double hydroxide, which was intercalated with sodium dodecyl sulfate were synthesized by in situ bulk polymerization. The nanocomposites were characterized and compared by X-ray diffraction, thermogravimetric analysis and flammability test. The X-ray diffraction demonstrated that synthesized nanocomposites showed a high global dispersion of layered double hydroxide, suggesting exfoliated morphology. The result of thermogravimetric analysis and flammability test for synthesized polystyrene/ layered double hydroxide nanocomposite presented a significant improvement in thermal stability and flammability property when compared with pure polymer. (author)

  19. Structural and microstructural changes during anion exchange of CoAl layered double hydroxides: an in situ X-ray powder diffraction study

    DEFF Research Database (Denmark)

    Johnsen, Rune; Krumeich, Frank; Norby, Poul

    2010-01-01

    Anion-exchange processes in cobalt-aluminium layered double hydroxides (LDHs) were studied by in situ synchrotron X-ray powder diffraction (XRPD). The processes investigated were CoAl-CO3 CoAl-Cl CoAl-CO3, CoAl-Cl CoAl-NO3 and CoAl-CO3 CoAl-SO4. The XRPD data show that the CoAl-CO3 CoAl-Cl process...

  20. The intermediate frequency modes of single- and double-walled carbon nanotubes: a Raman spectroscopic and in situ Raman spectroelectrochemical study.

    Science.gov (United States)

    Kalbac, Martin; Kavan, Ladislav; Zukalová, Markéta; Dunsch, Lothar

    2006-05-24

    The intermediate frequency modes (IFM) of single-walled carbon nanotubes (SWCNTs) and double-walled carbon nanotubes (DWCNTs) were analyzed by Raman spectroscopy and in situ Raman spectroelectrochemistry. The inner and outer tubes of DWCNTs manifested themselves as distinct bands in the IFM region. This confirmed the diameter dependence of IFM frequencies. Furthermore, the analysis of inner tubes of DWCNTs allowed a more-precise assignment of the bands in the IFM region to features intrinsic for carbon nanotubes. Although the inner tubes in DWCNTs are assumed to be structurally perfect, the role of defects on IFM was discussed. The dependence of IFM on electrochemical charging was also studied. In situ spectroelectrochemical data provide a means to distinguish the bands of the outer and inner tubes.

  1. A double labeling technique for performing immunocytochemistry and in situ hybridization in virus infected cell cultures and tissues

    International Nuclear Information System (INIS)

    Gendelman, H.E.; Moench, T.R.; Narayan, O.; Griffin, D.E.; Clements, J.E.

    1985-01-01

    This report describes a combined immunocytochemical and in situ hybridization procedure which allows visualization of cellular or viral antigens and viral RNA in the same cell. Cultures infected with visna or measles virus were fixed in periodate-lysine-paraformaldehyde-glutaraldehyde, stained by the avidin-biotin-peroxidase technique using antibodies to viral or cellular proteins and then incubated with radiolabeled specific DNA probes (in situ hybridization). This technique provides a new approach to the study of viral pathogenesis by: (1) identifying the types of cells which are infected in the host and (2) identifying points of blockade in the virus life cycle during persistent infections. (Auth.)

  2. Determination of the deliquesce point in double salts and in in-situ multicomponent salts with DVS equipment

    DEFF Research Database (Denmark)

    Rörig-Dalgaard, Inge

    2014-01-01

    Accelerated salt induced deterioration occurs by frequently changes across the deliquescence point. Therefore does the actual deliquescence point of the present salts have a major impact on preventive conservation being able to ensure a relative humidity not causing salt phase transition and to in......-situ desalination as dissolution of the salts is the essential criterion to enable transport of salt (ions) in the construction. In the present work deliquescence points were measured with dynamic vapor sorption (DVS) equipment in salt mixtures and the results are shown to be in agreement with values from...... the literature. Also in-situ-multi salt samples were measured including the difference between the second critical relative humidity and the efflorescence relative humidity being a measure for the critical supersaturation required for crystallization at the specific experimental conditions. The DVS equipment...

  3. In situ Raman spectroelectrochemistry as a tool for the differentiation of inner tubes of double-wall carbon nanotubes and thin single-wall carbon nanotubes.

    Science.gov (United States)

    Kalbác, Martin; Kavan, Ladislav; Dunsch, Lothar

    2007-12-01

    In situ Raman spectroelectrochemistry has been used to distinguish between thin single-wall carbon nanotubes (SWCNT) and the inner tubes of double-wall carbon nanotubes (DWCNT). The spectroelectrochemical method is based on the different change of the electronic structure of the inner tube in DWCNT and that of SWCNT during electrochemical charging, which is reflected in the Raman spectra. During electrochemical charging the inner tubes of DWCNT exhibit a delayed attenuation of the intensities of their Raman modes as referred to the behavior of SWCNT of similar diameter. The changes are pronounced for the radial breathing mode (RBM), and thus, these modes are diagnostic for the distinction of inner tubes of DWCNT from the thin SWCNT. The different sensitivities of inner and outer tubes to the applied electrochemical charging is a simple analytical tool for differentiation of SWCNT and DWCNT in a mixture. The significance of the proposed method is demonstrated on a commercial DWCNT sample.

  4. In Situ Formation of Decavanadate-Intercalated Layered Double Hydroxide Films on AA2024 and their Anti-Corrosive Properties when Combined with Hybrid Sol Gel Films

    Directory of Open Access Journals (Sweden)

    Junsheng Wu

    2017-04-01

    Full Text Available A layered double hydroxide (LDH film was formed in situ on aluminum alloy 2024 through a urea hydrolysis method, and a decavanadate-intercalated LDH (LDH-V film fabricated through the dip coating method. The microstructural and morphological characteristics were investigated by scanning electron microscopy (SEM. The corrosion-resistant performance was analyzed by electrochemical impedance spectroscopy (EIS, scanning electrochemical microscopy (SECM, and a salt-spray test (SST.The SEM results showed that a complete and defect-free surface was formed on the LDH-VS film. The anticorrosion results revealed that the LDH-VS film had better corrosion-resistant properties than the LDH-S film, especially long-term corrosion resistance. The mechanism of corrosion protection was proposed to consist of the self-healing effect of the decavanadate intercalation and the shielding effect of the sol-gel film.

  5. Reliability enhancement due to in-situ post-oxidation of sputtered MgO barrier in double MgO barrier magnetic tunnel junction

    Directory of Open Access Journals (Sweden)

    Chikako Yoshida

    2017-06-01

    Full Text Available We have investigated the effects of in-situ post-oxidation (PO of a sputtered MgO barrier in a double-MgO-barrier magnetic tunnel junction (MTJ and found that the short error rate was significantly reduced, the magnetoresistance (MR ratio was increased approximately 18%, and the endurance lifetime was extend. In addition, we found that the distribution of breakdown number (a measure of endurance exhibits trimodal characteristics, which indicates competition between extrinsic and intrinsic failures. This improvement in reliability might be related to the suppression of Fe and Co diffusion to the MgO barrier, as revealed by electron energy-loss spectroscopy (EELS analysis.

  6. Design of a randomized controlled double-blind crossover clinical trial to assess the effects of saliva substitutes on bovine enamel and dentin in situ

    Directory of Open Access Journals (Sweden)

    Kielbassa Andrej M

    2011-04-01

    Full Text Available Abstract Background Hyposalivation is caused by various syndromes, diabetes, drugs, inflammation, infection, or radiotherapy of the salivary glands. Patients with hyposalivation often show an increased caries incidence. Moreover, hyposalivation is frequently accompanied by oral discomfort and impaired oral functions, and saliva substitutes are widely used to alleviate oral symptoms. However, preference of saliva substitutes due to taste, handling, and relief of oral symptoms has been discussed controversially. Some of the marketed products have shown demineralizing effects on dental hard tissues in vitro. This demineralizing potential is attributed to the undersaturation with respect to calcium phosphates. Therefore, it is important to modify the mineralizing potential of saliva substitutes to prevent carious lesions. Thus, the aim of the present study was to evaluate the effects of a possible remineralizing saliva substitute (SN; modified Saliva natura compared to a demineralizing one (G; Glandosane on mineral parameters of sound bovine dentin and enamel as well as on artificially demineralized enamel specimens in situ. Moreover, oral well-being after use of each saliva substitute was recorded. Methods/Design Using a randomized, double-blind, crossover, phase II/III in situ trial, volunteers with hyposalivation utilize removable dentures containing bovine specimens during the experimental period. The volunteers are divided into two groups, and are required to apply both saliva substitutes for seven weeks each. After both test periods, differences in mineral loss and lesion depth between values before and after exposure are evaluated based on microradiographs. The oral well-being of the volunteers before and after therapy is determined using questionnaires. With respect to the microradiographic analysis, equal mineral losses and lesion depths of enamel and dentin specimens during treatment with SN and G, and no differences in patients

  7. Structural and microstructural changes during anion exchange of CoAl layered double hydroxides. An in situ X-ray powder diffraction study

    International Nuclear Information System (INIS)

    Johnsen, Rune E.; Krumeich, Frank; Norby, Poul

    2010-01-01

    Anion-exchange processes in cobalt-aluminium layered double hydroxides (LDHs) were studied by in situ synchrotron X-ray powder diffraction (XRPD). The processes investigated were CoAl-CO 3 →CoAl-Cl →CoAl-CO 3 , CoAl-Cl→CoAl-NO 3 and CoAl-CO 3 →CoAl-SO 4 . The XRPD data show that the CoAl-CO 3 →CoAl-Cl process is a two-phase transformation, where the amount of the CoAl-CO 3 phase decreases exponentially while that of the CoAl-Cl phase increases exponentially. Energy-dispersive X-ray spectroscopy (EDXS) studies of a partially chloride-exchanged CoAl-CO 3 LDH sample along with in situ XRPD data suggested that the individual particles in the CoAl-CO 3 sample are generally anion-exchanged with chloride one at a time. In contrast with the CoAl-CO 3 →CoAl-Cl transformation, the XRPD data show that the reverse CoAl-Cl→CoAl-CO 3 process is a one-phase transformation. Rietveld refinements indicate that the occupancy factors of the carbon and oxygen sites of the carbonate group increase, while that of the chloride site decreases. In the CoAl-Cl→CoAl-NO 3 anion-exchange reaction, the XRPD patterns reveal the existence of two intermediate phases in addition to the initial CoAl-Cl and final CoAl-NO 3 phases. The in situ data indicate that one of these intermediates is a mixed nitrate- and chloride-based LDH phase, where the disorder decreases as the nitrate content increases. The XRPD data of the partial CoAl-CO 3 →CoAl-SO 4 anion-exchange reaction show that the process is a two-phase transformation involving a sulfate-containing LDH with a 1H polytype structure. (orig.)

  8. Quantification of the simple and double strand breaks following the disintegration of iodine-125 in situ in chromosomal fiber

    International Nuclear Information System (INIS)

    Oudira, H.; Saifi, A.

    2010-01-01

    The principal objective of this study is to compare the radiochemical yields of the simple and double strand breaks (C.S.B. and C.D.B.) generated in the propellers of the molecule of DNA, following the taking in consideration of two electronic spectra of disintegration of iodine-125. Indeed, the combined use of the Monte Carlo method of the type step by step and the equation of diffusion (∂ C i / ∂ t = D i Δ 2 C i + S) makes it possible to simulate the transport of the electrons, and the chemical reactions due to the diffusion of the entities created throughout the physico-chemical and chemical process considered (e-aq, H, OH, H 2 , H 2 O 2 , and H 3 O + ). In this study, we take in consideration a complex model of DNA (nucleosome) and its envelope of hydration like we also take in consideration of the radio-protector effect of the inhibitors such as the Formiat (Formiat the sodium, HCOO - ). Moreover, the comparison of our results to those obtained by other models, highlights on one hand an unquestionable agreement and on the other hand the power and the capacity of adaptation of the codes worked out to various models of DNA. (authors)

  9. Creep of fibrous composite materials

    DEFF Research Database (Denmark)

    Lilholt, Hans

    1985-01-01

    Models are presented for the creep behaviour of fibrous composite materials with aligned fibres. The models comprise both cases where the fibres remain rigid in a creeping matrix and cases where the fibres are creeping in a creeping matrix. The treatment allows for several contributions...... to the creep strength of composites. The advantage of combined analyses of several data sets is emphasized and illustrated for some experimental data. The analyses show that it is possible to derive creep equations for the (in situ) properties of the fibres. The experiments treated include model systems...... such as Ni + W-fibres, high temperature materials such as Ni + Ni3Al + Cr3C2-fibres, and medium temperature materials such as Al + SiC-fibres. For the first two systems reasonable consistency is found for the models and the experiments, while for the third system too many unquantified parameters exist...

  10. The use of dissolvable layered double hydroxide components in an in situ solid-phase extraction for chromatographic determination of tetracyclines in water and milk samples.

    Science.gov (United States)

    Phiroonsoontorn, Nattaphorn; Sansuk, Sira; Santaladchaiyakit, Yanawath; Srijaranai, Supalax

    2017-10-13

    This research presents a simple and green in situ solid phase extraction (is-SPE) combined with high-performance liquid chromatography (HPLC) for the simultaneous analysis of tetracyclines (TCs) including tetracycline, oxytetracycline, and chlortetracycline. In is-SPE, TCs were efficiently extracted through the precipitation formation of dissolvable layered double hydroxides (LDHs) by mixing the LDH components such as magnesium and aluminum ions (both in metal chloride salts) thoroughly in an alkaline sample solution. After the centrifugation, the precipitate was completely dissolved with trifluoroacetic acid to release the enriched TCs, and then analyzed by HPLC. Under optimized conditions, this method gave good enrichment factors (EFs) of 41-93 with low limits of detection (LODs) of 0.7-6μg/L and limits of quantitation (LOQs) of 3-15μg/L. Also, the proposed method was successfully applied for the determination of TCs in water and milk samples with the recoveries ranging from 81.7-108.1% for water and 55.7-88.7% for milk. Copyright © 2017 Elsevier B.V. All rights reserved.

  11. Two-color double-labeling in situ hybridization of whole-mount Hydra using RNA probes for five different Hydra neuropeptide preprohormones: evidence for colocalization

    DEFF Research Database (Denmark)

    Hansen, G N; Williamson, M; Grimmelikhuijzen, C J

    2000-01-01

    The freshwater polyp Hydra magnipapillata has a primitive nervous system that produces at least three distinct classes of neuropeptides: various peptides having the C-terminal sequence Arg-Phe-NH2 (the Hydra-RFamide family), Leu-Trp-NH2 (the Hydra-LWamide family), and a single peptide having the C......-terminal sequence Lys-Val-NH2 (Hydra-KVamide). The various Hydra-RFamides are synthesized by three different preprohormones: preprohormone-A, -B, and -C. The various Hydra-LWamides are synthesized by a single preprohormone (prepro-Hydra-LWamide), as is Hydra-KVamide (prepro-Hydra-KVamide). Using a wholemount double......-labeling two-color in situ hybridization technique and RNA probes specific for each of these five Hydra preprohormone mRNAs, we found that specific sets of neurons express each of the five preprohormones, except for the peduncle region of Hydra (an area just above the basal disk), where a population of neurons...

  12. Simultaneous detection of different mRNA sequences coding for neuropeptide hormones by double in situ hybridization using FITC- and biotin-labeled oligonucleotides.

    Science.gov (United States)

    Dirks, R W; van Gijlswijk, R P; Tullis, R H; Smit, A B; van Minnen, J; van der Ploeg, M; Raap, A K

    1990-04-01

    Oligonucleotides labeled with FITC or biotin were applied for detection of specific mRNAs in microscopic preparations by in situ hybridization. The oligonucleotides were labeled with one FITC or biotin molecule at the 5' end or with a tail of biotin molecules at the 3' end. The target sequences were mRNAs coding for an ovulation hormone (CDCH) in the caudodorsal cells (CDC) of the pond snail Lymnaea stagnalis and a molluscan insulin-like peptide (MIP) in the light green cells (LGC) of the same organism. The hybridized oligonucleotides were detected either directly after the hybridization procedure by fluorescence microscopy or indirectly after an immunocytochemical procedure to visualize the biotin or FITC moiety. The results indicate that the detectability of the mRNA sequences is at least partially dependent on the accessibility of the target sequences for the immunocytochemical detection systems. The positive hybridization results obtained with oligonucleotides containing different labels enabled us to perform double hybridization experiments for simultaneous detection of CDCH and MIP mRNAs in one tissue section. Using FITC- and biotin-labeled oligonucleotides, we also demonstrated simultaneously different sequences on the same mRNA molecule.

  13. IN SITU DEGRADABILITY OF DRY MATTER AND FIBROUS FRACTION SUGARCANE BAGASSE TREATED WITH UREA DEGRADABILIDADE IN SITU DA MATÉRIA SECA E DA FRAÇÃO FIBROSA DO BAGAÇO DE CANA-DE-AÇÚCAR TRATADO COM URÉIA

    Directory of Open Access Journals (Sweden)

    Fabrício Bacelar Lima Mendes

    2007-09-01

    Full Text Available

    The experiment was conducted to evaluate the in situ degradability of dry matter (iDMD, neutral detergent fiber (iNDFD, acid detergent fiber (iADFD and hemicel-lulosis of sugar cane bagasse submitted to ammoniation with urea. The treatments consisted of four urea levels (0%, 2.5%, 5.0% and 7.5% on dry matter – DM basis added to the sugar cane bagasse and addition of 1.2% (DM basis of ground soybean as urease source. Samples of 3 g of the bagasses were incubated in the rumen of three steers during periods of 0, 12, 24, 48, 72 and 96 hours. The urea addiction to sugar cane bagasse provided increase not only on the iDMD, but also in degradability of cell wall con-tents. The degradability increased of 73.6, 61.3, 45.6 and 65.7% for DM, NDF, ADF and hemicellulosis, respective-ly, at the longer incubation time (96 hours. The iDMD, iNDFD, iADFD and in situ hemicellusosis degradability of sugar cane bagasse were improved by urea treatment.

    KEY-WORDS: Ammoniation, by product, dry matter, cellular wall.

    O experimento foi desenvolvido para avaliar a de-gradabilidade in situ da matéria seca (DiMS, da fibra em detergente neutro (DiFDN, da fibra em detergente ácido (DiFDA e da hemicelulose do bagaço de cana-de-açúcar submetido à amonização com uréia. Os tratamentos cons-taram de quatro níveis de uréia (0%, 2,5%, 5,0% e 7,5% na base da matéria seca – MS adicionados ao bagaço de cana-de-açúcar e adição de 1,2% (base da MS de soja grão moída como fonte de urease. Amostras de 3 g dos bagaços foram incubadas no rúmen de três novilhos por períodos de 0, 12, 24, 48, 72 e 96 horas. A adição de uréia ao bagaço de cana-de-açúcar promoveu aumento tanto na DiMS como também na degradabilidade dos constituintes da parede celular. Houve incrementos nas degradabilidades de 73,6%, 61,3%, 45,6% e 65,7% para a MS, FDN, FDA e hemice-lulose, respectivamente, no maior tempo de incubação (96 horas. A DiMS, DiFDN, DiFDA e a

  14. Strength of Fibrous Composites

    CERN Document Server

    Huang, Zheng-Ming

    2012-01-01

    "Strength of Fibrous Composites" addresses evaluation of the strength of a fibrous composite by using its constituent material properties and its fiber architecture parameters. Having gone through the book, a reader is able to predict the progressive failure behavior and ultimate strength of a fibrous laminate subjected to an arbitrary load condition in terms of the constituent fiber and matrix properties, as well as fiber geometric parameters. The book is useful to researchers and engineers working on design and analysis for composite materials. Dr. Zheng-Ming Huang is a professor at the School of Aerospace Engineering & Applied Mechanics, Tongji University, China. Mr. Ye-Xin Zhou is a PhD candidate at the Department of Mechanical Engineering, the University of Hong Kong, China.

  15. Methods Development for In Situ Laser-Ablation Pb and Sr Isotopic Analyses Using a Double-Focusing Single-Collector ICPMS

    Science.gov (United States)

    Pietruszka, A. J.; Neymark, L. A.

    2014-12-01

    Laser-ablation (LA) ICPMS isotopic analyses of Pb and Sr in geological materials have mostly used multi-collector instruments equipped with Faraday-type detectors (e.g., [1-3]). The main limitation of this approach is that samples with relatively high concentrations of Pb and Sr are typically required. Here we present the development of analytical methods for the accurate and precise in situ measurement of Pb and Sr isotope ratios in relatively low-concentration samples using a laser ablation system (193-nm excimer laser) with a double-focusing single-collector (SC) ICPMS (Nu AttoMTM). Our methods build on published techniques [4-6] that used different LA-SC-ICPMS instrumentation to demonstrate the benefits of fast-scanning ion-counting measurements combined with flat-top peaks. We have paid special attention to the characterization and correction of instrumental artifacts using solutions of the NIST SRM981 Pb and SRM987 Sr standards in "wet plasma" mode. For Pb, this includes correcting for the interference of 204Hg on 204Pb, characterizing the effects of tails from thallium (at masses 203 and 205) on the Pb peaks, evaluating the stability of the instrumental mass bias, and maintaining linearity of the detector response over the full dynamic range. For Sr, this includes correcting for the interference of 86Kr on 86Sr and 87Rb on 87Sr, verifying the accuracy of an internal correction for instrumental mass bias, and calibrating the ion optics scanning parameters. LA-SC-ICPMS results for Pb and Sr isotopic measurements of international glass standards and newly developed in-house mineral and glass reference materials will be presented. [1] Davidson et al. (2001) EPSL 184, 427-442. [2] Ramos et al. (2004) Chem. Geol. 211, 135-158. [3] Simon et al. (2007) GCA 71, 2014-2035. [4] Jochum et al. (2005) IJMS 242, 281-289. [5] Jochum et al. (2006) JAAS 21, 666-675. [6] Jochum et al. (2009) JAAS 24, 1237-1243.

  16. Cofortification of ferric pyrophosphate and citric acid/trisodium citrate into extruded rice grains doubles iron bioavailability through in situ generation of soluble ferric pyrophosphate citrate complexes.

    Science.gov (United States)

    Hackl, Laura; Cercamondi, Colin I; Zeder, Christophe; Wild, Daniela; Adelmann, Horst; Zimmermann, Michael B; Moretti, Diego

    2016-05-01

    Iron fortification of rice is a promising strategy for improving iron nutrition. However, it is technically challenging because rice is consumed as intact grains, and ferric pyrophosphate (FePP), which is usually used for rice fortification, has low bioavailability. We investigated whether the addition of a citric acid/trisodium citrate (CA/TSC) mixture before extrusion increases iron absorption in humans from FePP-fortified extruded rice grains. We conducted an iron absorption study in iron-sufficient young women (n = 20), in which each participant consumed 4 different meals (4 mg Fe/meal): 1) extruded FePP-fortified rice (No CA/TSC); 2) extruded FePP-fortified rice with CA/TSC added before extrusion (CA/TSC extruded); 3) extruded FePP-fortified rice with CA/TSC solution added after cooking and before consumption (CA/TSC solution); and 4) nonextruded rice fortified with a FeSO4 solution added after cooking and before consumption (reference). Iron absorption was calculated from erythrocyte incorporation of stable iron isotopes 14 d after administration. In in vitro experiments, we assessed the soluble and dialyzable iron from rice meals in which CA/TSC was added at different preparation stages and from meals with different iron:CA:TSC ratios. Fractional iron absorption was significantly higher from CA/TSC-extruded meals (3.2%) than from No CA/TSC (1.7%) and CA/TSC solution (1.7%; all P solubility and dialyzability were higher in CA/TSC-extruded rice than in rice with No CA/TSC and CA/TSC solution, and solubility increased with higher amounts of added CA and TSC in extruded rice. Iron bioavailability nearly doubled when CA/TSC was extruded with FePP into fortified rice, resulting in iron bioavailability comparable to that of FeSO4 We attribute this effect to an in situ generation of soluble FePP citrate moieties during extrusion and/or cooking because of the close physical proximity of FePP and CA/TSC in the extruded rice matrix. This trial was registered at

  17. Triplex in-situ hybridization

    Science.gov (United States)

    Fresco, Jacques R.; Johnson, Marion D.

    2002-01-01

    Disclosed are methods for detecting in situ the presence of a target sequence in a substantially double-stranded nucleic acid segment, which comprises: a) contacting in situ under conditions suitable for hybridization a substantially double-stranded nucleic acid segment with a detectable third strand, said third strand being capable of hybridizing to at least a portion of the target sequence to form a triple-stranded structure, if said target sequence is present; and b) detecting whether hybridization between the third strand and the target sequence has occured.

  18. In situ

    Science.gov (United States)

    Tremsin, Anton S; Makowska, Małgorzata G; Perrodin, Didier; Shalapska, Tetiana; Khodyuk, Ivan V; Trtik, Pavel; Boillat, Pierre; Vogel, Sven C; Losko, Adrian S; Strobl, Markus; Kuhn, L Theil; Bizarri, Gregory A; Bourret-Courchesne, Edith D

    2016-06-01

    Neutrons are known to be unique probes in situations where other types of radiation fail to penetrate samples and their surrounding structures. In this paper it is demonstrated how thermal and cold neutron radiography can provide time-resolved imaging of materials while they are being processed ( e.g. while growing single crystals). The processing equipment, in this case furnaces, and the scintillator materials are opaque to conventional X-ray interrogation techniques. The distribution of the europium activator within a BaBrCl:Eu scintillator (0.1 and 0.5% nominal doping concentrations per mole) is studied in situ during the melting and solidification processes with a temporal resolution of 5-7 s. The strong tendency of the Eu dopant to segregate during the solidification process is observed in repeated cycles, with Eu forming clusters on multiple length scales (only for clusters larger than ∼50 µm, as limited by the resolution of the present experiments). It is also demonstrated that the dopant concentration can be quantified even for very low concentration levels (∼0.1%) in 10 mm thick samples. The interface between the solid and liquid phases can also be imaged, provided there is a sufficient change in concentration of one of the elements with a sufficient neutron attenuation cross section. Tomographic imaging of the BaBrCl:0.1%Eu sample reveals a strong correlation between crystal fractures and Eu-deficient clusters. The results of these experiments demonstrate the unique capabilities of neutron imaging for in situ diagnostics and the optimization of crystal-growth procedures.

  19. Gastric Calcifying Fibrous Tumour

    Directory of Open Access Journals (Sweden)

    Tan Attila

    2006-01-01

    Full Text Available Intramucosal gastric tumours are most commonly found to be gastrointestinal stromal tumours or leiomyomas (smooth muscle tumours; however, a variety of other uncommon mesenchymal tumours can occur in the stomach wall. A rare benign calcifying fibrous tumour is reported and the endoscopic appearance, ultrasound findings and morphology are documented. A review of the literature found only two similar cases.

  20. In situ

    Science.gov (United States)

    Chamlagain, Bhawani; Sugito, Tessa A; Deptula, Paulina; Edelmann, Minnamari; Kariluoto, Susanna; Varmanen, Pekka; Piironen, Vieno

    2018-01-01

    The in situ production of active vitamin B12 was investigated in aqueous cereal-based matrices with three strains of food-grade Propionibacterium freudenreichii . Matrices prepared from malted barley flour (33% w/v; BM), barley flour (6%; BF), and wheat aleurone (15%; AM) were fermented. The effect of cobalt and the lower ligand 5,6-dimethylbenzimidazole (DMBI) or its natural precursors (riboflavin and nicotinamide) on active B12 production was evaluated. Active B12 production was confirmed by UHPLC-UV-MS analysis. A B12 content of 12-37 μg·kg -1 was produced in BM; this content increased 10-fold with cobalt and reached 940-1,480 μg·kg -1 with both cobalt and DMBI. With riboflavin and nicotinamide, B12 production in cobalt-supplemented BM increased to 712 μg·kg -1 . Approximately, 10 μg·kg -1 was achieved in BF and AM and was increased to 80 μg·kg -1 in BF and 260 μg·kg -1 in AM with cobalt and DMBI. The UHPLC and microbiological assay (MBA) results agreed when both cobalt and DMBI or riboflavin and nicotinamide were supplemented. However, MBA gave ca. 20%-40% higher results in BM and AM supplemented with cobalt, indicating the presence of human inactive analogues, such as pseudovitamin B12. This study demonstrates that cereal products can be naturally fortified with active B12 to a nutritionally relevant level by fermenting with P. freudenreichii .

  1. Specific in situ hepatitis B viral double mutation (HBVDM) detection in urine with 60 copies ml(-1) analytical sensitivity in a background of 250-fold wild type without DNA isolation and amplification.

    Science.gov (United States)

    Kirimli, Ceyhun E; Shih, Wei-Heng; Shih, Wan Y

    2015-03-07

    We have examined in situ detection of hepatitis B virus 1762T/1764A double mutation (HBVDM) in urine using a (Pb(Mg(1/3)Nb(2/3))O3)(0.65)(PbTiO3)(0.35) (PMN-PT) piezoelectric plate sensor (PEPS) coated with a 16-nucleotide (nt) probe DNA (pDNA) complementary to the HBVDM. The in situ mutation (MT) detection was carried out in a flow with the PEPS vertically situated at the center of the flow in a background of wild type (WT). For validation, this detection was followed by detection in the mixture of MT fluorescent reporter microspheres (FRMs) (MT FRMs) and WT FRMs that emitted different fluorescence colours and were designed to specifically bind to MT and WT, respectively. At 30 °C and 4 ml min(-1), a PEPS was shown to specifically detect HBVDM in situ with 60 copies ml(-1) analytical sensitivity in a background of clinically-relevant 250-fold more WT in 30 min without DNA isolation, amplification, or labelling as validated by the visualization of the captured MT FRMs and WT FRMs following FRM detection where the captured MT FRMs outnumbered the WT FRMs by a factor of 5 to 1.

  2. Fibrous dysplasia and cherubism

    Directory of Open Access Journals (Sweden)

    Surajit Bhattacharya

    2015-01-01

    Full Text Available Fibrous dysplasia (FD is a non-malignant fibro-osseous bony lesion in which the involved bone/bones gradually get converted into expanding cystic and fibrous tissue. The underlying defect in FD is post-natal mutation of GNAS1 gene, which leads to the proliferation and activation of undifferentiated mesenchymal cells arresting the bone development in woven phase and ultimately converting them into fibro-osseous cystic tissue. Cherubism is a hereditary form of fibrous dysplasia in which the causative factor is transmission of autosomal dominant SH3BP2 gene mutation. The disease may present in two distinct forms, a less severe and limited monostotic form, and a more aggressive and more widespread polyostotic form. Polyostotic form may be associated with various endocrine abnormalities, which require active management apart from the management of FD. Management of FD is not free from controversies. While total surgical excision of the involved area and reconstruction using newer micro-vascular technique is the only definitive treatment available from the curative point of view, but this can be only offered to monostotic and very few polyostotic lesions. In polyostotic varieties on many occasions these radical surgeries are very deforming in these slow growing lesions and so their indication is highly debated. The treatment of cranio-facial fibrous dysplasia should be highly individualized, depending on the fact that the clinical behavior of lesion is variable at various ages and in individual patients. A more conservative approach in the form of aesthetic recontouring of deformed bone, orthodontic occlusal correction, and watchful expectancy may be the more accepted form of treatment in young patients. Newer generation real-time imaging guidance during recontouring surgery adds to accuracy and safety of these procedures. Regular clinical and radiological follow up is required to watch for quiescence, regression or reactivation of the disease process

  3. In-Situ Real-Time Focus Detection during Laser Processing Using Double-Hole Masks and Advanced Image Sensor Software.

    Science.gov (United States)

    Cao, Binh Xuan; Hoang, Phuong Le; Ahn, Sanghoon; Kim, Jeng-O; Kang, Heeshin; Noh, Jiwhan

    2017-07-01

    In modern high-intensity ultrafast laser processing, detecting the focal position of the working laser beam, at which the intensity is the highest and the beam diameter is the lowest, and immediately locating the target sample at that point are challenging tasks. A system that allows in-situ real-time focus determination and fabrication using a high-power laser has been in high demand among both engineers and scientists. Conventional techniques require the complicated mathematical theory of wave optics, employing interference as well as diffraction phenomena to detect the focal position; however, these methods are ineffective and expensive for industrial application. Moreover, these techniques could not perform detection and fabrication simultaneously. In this paper, we propose an optical design capable of detecting the focal point and fabricating complex patterns on a planar sample surface simultaneously. In-situ real-time focus detection is performed using a bandpass filter, which only allows for the detection of laser transmission. The technique enables rapid, non-destructive, and precise detection of the focal point. Furthermore, it is sufficiently simple for application in both science and industry for mass production, and it is expected to contribute to the next generation of laser equipment, which can be used to fabricate micro-patterns with high complexity.

  4. Angiomatoid fibrous histiocytoma: novel MR imaging findings

    Energy Technology Data Exchange (ETDEWEB)

    Martinez, Salutario J.; Vinson, Emily N. [Duke University Medical Center, Department of Radiology, Durham, NC (United States); Moreno, Courtney Coursey [Emory University School of Medicine, Department of Radiology and Imaging Sciences, Atlanta, GA (United States); Dodd, Leslie G. [University of North Carolina School of Medicine, Department of Pathology and Laboratory Medicine, Chapel Hill, NC (United States); Brigman, Brian E. [Duke University Medical Center, Department of Orthopedic Surgery, Durham, NC (United States)

    2016-05-15

    To describe novel MR imaging features, and clinical characteristics of soft tissue angiomatoid fibrous histiocytoma (AFH) at presentation, local recurrence, and metastases. We described the MRI findings of six cases of histologically proven AFH. Pathologic findings, clinical presentation, and outcome were reviewed. Lesions were primarily cystic. At initial presentation, tumors were surrounded by low signal intensity fibrous pseudocapsule. High signal intensity consistent with the lymphoplasmacytic infiltrate was seen in T2-weighted and post-contrast images as a rim over the hypointense pseudocapsule (double rim sign). High signal intensity infiltrating tumoral cords extended into adjacent tissues, through pseudocapsular defects on T2-weighted and post-contrast images. The cystic component and tumor cell nodularity were demonstrated at post-contrast images. Clinically, lesions were often thought to be benign, underwent marginal resection, developed local recurrence, and one developed second recurrence consisting of metastases. Recurrent tumors appeared as multiple masses, misinterpreted as post-surgical changes. An intramuscular recurrence demonstrated double rim and infiltrating margin. A predominantly well-circumscribed, primarily cystic mass with double-rim and marginal infiltration on MRI suggests the possibility of AFH, in particular in child or young adult. Inclusion of these novel observations in AFH differential diagnosis may have a significant impact on treatment and prevention of recurrence. (orig.)

  5. In-situ construction of Au nanoparticles confined in double-shelled TiO2/mSiO2 hollow architecture for excellent catalytic activity and enhanced thermal stability

    Science.gov (United States)

    Fang, Jiasheng; Zhang, Yiwei; Zhou, Yuming; Zhang, Chao; Zhao, Shuo; Zhang, Hongxing; Sheng, Xiaoli

    2017-01-01

    A facile strategy has been developed for the synthesis of H-TS-Au microspheres (MCs) with double-shelled hollow architecture and sub-5 nm Au nanoparticles (Au NPs). The synthetic procedure involves the successive sol-gel template-assisted method for the preparation of uniform hierarchical hollow-in-hollow H-TS MCs with TiO2/mSiO2 as yolks/shells, and the unique deposition-precipitation method mediated with Au(en)2Cl3 precursors for the in-situ construction of extremely stable Au NPs under a low-temperature hydrogen reduction. The synthesized H-TS-Au MCs were characterized by TEM, SEM, FTIR, XRD, BET and UV-vis absorption spectra. Catalytic activity of H-TS-Au was evaluated using the reduction of 4-nitrophenol (4-NP) into 4-aminophenol (4-AP) by NaBH4. Results established that H-TS-Au MCs possessed a large-size double-shelled architecture with high structural integrity and robustness,which can effectively confine numerous tiny Au NPs and restrict them from sintering aggregation even up to further calcination at 800 °C. Owing to the advantageous structural configuration and the synergistic effect of TiO2/mSiO2 double shells, the H-TS-Au MCs were demonstrated to exhibit a remarkable catalytic activity and stability, and preserve the intact morphology after 6 repeating reduction of 4-NP.

  6. In situ Remediation Technologies

    NARCIS (Netherlands)

    Grotenhuis, J.T.C.; Rijnaarts, H.H.M.

    2011-01-01

    A summary of two decades of developments of In Situ remediation is presented in this chapter. The basic principles of In Situ technology application are addressed, such as equilibrium relations between contaminant phases, factors controlling biological and geochemical processes, contaminant

  7. Fibrous dysplasia of maxillary sinus

    OpenAIRE

    Tinoco, Paulo; Pereira, José Carlos Oliveira; Lourenço Filho, Rodolfo Caldas; Silva, Fabrício Boechat do Carmo; Ruela, Karol Pereira

    2009-01-01

    Introduction: The Fibrous Dysplasia is a benign bone disease, of slow growth and unknown etiology. The involvement of the craniofacial skeleton is not uncommon and, generally, produces facial asymmetries. Case Report: In this article we report the case of a patient with fibrous dysplasia occupying the entire left maxillary sinus with orbitary extension confirmed in the anatomopathological exam. Final Comments: The surgical treatment remains as the main therapeutic approach and the postoperati...

  8. Síntese e caracterização de Nanocompósitos Esfoliados de Poliestireno: Hidróxido Duplo Lamelar via polimerização in situ Synthesis and characterization of Exfoliated Polystyrene: Layered Double Hydroxide Nanocomposites via in situ polymerization

    Directory of Open Access Journals (Sweden)

    Rodrigo Botan

    2011-01-01

    Full Text Available Nanocompósitos Esfoliados de Poliestireno (PS e Hidróxido Duplo Lamelar (HDL composto por zinco, alumínio e dodecil sulfato de sódio, como ânion interlamelar, foram sintetizados via polimerização in situ. O efeito de diferentes composições de HDL (0,5, 1, 3 e 5% em massa foi avaliado. Os nanocompósitos obtidos foram caracterizados através de ensaios de Difração de Raios X (DRX, Espectroscopia no Infravermelho por Transformada de Fourier (FTIR, Microscopia Eletrônica de Transmissão (MET e Análise Termogravimétrica (TGA. Os resultados obtidos através das análises de DRX e MET mostraram que todos os nanocompósitos produzidos apresentaram morfologia esfoliada. Os resultados das TGA, quando se utilizam 50% de perda de peso como ponto para comparação, apresentaram ganhos significativos de estabilidade térmica para todas as composições dos nanocompósitos em comparação ao poliestireno puro. Este comportamento possibilita uma vasta gama de aplicação destes novos materiais em diversos campos da indústria e pesquisa.Exfoliated nanocomposites of polystyrene (PS and layered double hydroxide (LDH compound of zinc, aluminium and sodium dodecyl sulfate, as interlayer anion, have been synthesized via in situ polymerization. The effect from the LDH compositions (0.5, 1, 3, 5% weight was studied. The nanocomposites were characterized by X-ray Diffraction (XRD, Fourier Transform Infrared Spectroscopy (FTIR, Transmission Electron Microscopy (TEM and Thermogravimetric Analysis (TGA. The XRD and TEM results showed an exfoliated morphology for the nanocomposites in all compositions. With the 50% weight loss taken as a reference, the TGA results indicated significant improvement in thermal stability for all compositions of the nanocomposites, in comparison to pure polystyrene. This is promising for the application of these new materials in many fields of industry and research.

  9. Fibrous dysplasia of maxillary sinus

    Directory of Open Access Journals (Sweden)

    Tinoco, Paulo

    2009-06-01

    Full Text Available Introduction: The Fibrous Dysplasia is a benign bone disease, of slow growth and unknown etiology. The involvement of the craniofacial skeleton is not uncommon and, generally, produces facial asymmetries. Case Report: In this article we report the case of a patient with fibrous dysplasia occupying the entire left maxillary sinus with orbitary extension confirmed in the anatomopathological exam. Final Comments: The surgical treatment remains as the main therapeutic approach and the postoperative follow-up is necessary due to this condition recurrent nature.

  10. Fibrous histiocytoma of the trachea.

    Science.gov (United States)

    Sandstrom, R E; Proppe, K H; Trelstad, R L

    1978-09-01

    The light and electron microscopic features of a fibrous histiocytoma of the trachea that occurred in a 15-year-old Caucasian girl are presented. Emphasis is placed on the aggresive behavior and the importance of early recognition of the lesion in an unusual location.

  11. Novel biomimetic hydroxyapatite/alginate nanocomposite fibrous scaffolds for bone tissue regeneration.

    Science.gov (United States)

    Chae, Taesik; Yang, Heejae; Leung, Victor; Ko, Frank; Troczynski, Tom

    2013-08-01

    Hydroxyapatite/alginate nanocomposite fibrous scaffolds were fabricated via electrospinning and a novel in situ synthesis of hydroxyapatite (HAp) that mimics mineralized collagen fibrils in bone tissue. Poorly crystalline HAp nanocrystals, as confirmed by X-ray diffractometer peak approximately at 2θ = 32° and Fourier transform infrared spectroscopy spectrum with double split bands of PO4(v 4) at 564 and 602 cm(-1), were induced to nucleate and grow at the [-COO(-)]-Ca(2+)-[-COO(-)] linkage sites on electrospun alginate nanofibers impregnated with PO4 (3-) ions. This novel process resulted in a uniform deposition of HAp nanocrystals on the nanofibers, overcoming the severe agglomeration of HAp nanoparticles processed by the conventional mechanical blending/electrospinning method. Preliminary in vitro cell study showed that rat calvarial osteoblasts attached more stably on the surface of the HAp/alginate scaffolds than on the pure alginate scaffold. In general, the osteoblasts were stretched and elongated into a spindle-shape on the HAp/alginate scaffolds, whereas the cells had a round-shaped morphology on the alginate scaffold. The unique nanofibrous topography combined with the hybridization of HAp and alginate can be advantageous in bone tissue regenerative medicine applications.

  12. Fibrous tissues growth and remodeling: Evolutionary micro-mechanical theory

    Science.gov (United States)

    Lanir, Yoram

    2017-10-01

    Living fibrous tissues are composite materials having the unique ability to adapt their size, shape, structure and mechanical properties in response to external loading. This adaptation, termed growth and remodeling (G&R), occurs throughout life and is achieved via cell-induced turnover of tissue constituents where some are degraded and new ones are produced. Realistic mathematical modeling of G&R provides insight into the basic processes, allows for hypotheses testing, and constitutes an essential tool for establishing clinical thresholds of pathological remodeling and for the production of tissue substitutes aimed to achieve target structure and properties. In this study, a general 3D micro-mechanical multi-scale theory of G&R in fibrous tissue was developed which connects between the evolution of the tissue structure and properties, and the underlying mechano-biological turnover events of its constituents. This structural approach circumvents a fundamental obstacle in modeling growth mechanics since the growth motion is not bijective. The model was realized for a flat tissue under two biaxial external loadings using data-based parameter values. The predictions show close similarity to characteristics of remodeled adult tissue including its structure, anisotropic and non-linear mechanical properties, and the onset of in situ pre-strain and pre-stress. The results suggest that these important features of living fibrous tissues evolve as they grow.

  13. Fibrous dysplasia in paranasal cavities.

    Science.gov (United States)

    Simovic, S; Klapan, I; Bumber, Z; Bura, M

    1996-01-01

    Presentation is made of 2 boys and a girl with fibrous dysplasia involving the frontal and ethmoidal sinuses and the maxilla. This tumor-like growth of the bone was not restricted to the sinus alone but expanded to the orbit, adjacent sinus, skull base and infratemporal or pterygoid fossa. In such cases, surgical therapy is the treatment of choice, with maximal preservation of healthy tissue and avoidance of major devastations that may result in undesired cosmetic defects. The etiology of the disease is still unknown. However, it should be emphasized that all 3 patients had suffered an injury to the adjacent bony structures at various time points preceding the disease manifestation. That is why we are inclined to believe that trauma might be a factor responsible for the onset of fibrous dysplasia.

  14. Creep of fibrous composite materials

    DEFF Research Database (Denmark)

    Lilholt, Hans

    1985-01-01

    Models are presented for the creep behaviour of fibrous composite materials with aligned fibres. The models comprise both cases where the fibres remain rigid in a creeping matrix and cases where the fibres are creeping in a creeping matrix. The treatment allows for several contributions to the cr......Models are presented for the creep behaviour of fibrous composite materials with aligned fibres. The models comprise both cases where the fibres remain rigid in a creeping matrix and cases where the fibres are creeping in a creeping matrix. The treatment allows for several contributions...... such as Ni + W-fibres, high temperature materials such as Ni + Ni3Al + Cr3C2-fibres, and medium temperature materials such as Al + SiC-fibres. For the first two systems reasonable consistency is found for the models and the experiments, while for the third system too many unquantified parameters exist...

  15. MRI of angiomatoid fibrous histiocytoma

    Energy Technology Data Exchange (ETDEWEB)

    Li, Chao-Shiang; Chen, Wei-Tsung; Chen, Ran-Chou; Tu, Hsing-Yang [Taipei Municipal Jen-Ai Hospital, Department of Radiology, Taipei (Taiwan); Chan, Wing P. [Taipei Medical University, Department of Radiology, School of Medicine, Taipei (Taiwan); Taipei Municipal Wan-Fang Hospital, Department of Radiology, Taipei (Taiwan); Chang, Chih-Peng [Taipei Municipal Jen-Ai Hospital, Department of Orthopedic Surgery, Taipei (Taiwan); Shih, Li-Sun [Taipei Municipal Jen-Ai Hospital, Department of Pathology, Taipei (Taiwan)

    2004-10-01

    Angiomatoid fibrous histiocytoma is a rare soft tissue tumor of low-grade malignancy. We present the case of a 32-year-old man who complained of soreness and numbness over his left arm and hand over the previous 2 months and of having a palpable mass over his left upper back for 4 years. Magnetic resonance imaging (MRI) showed an intramuscular soft tissue mass in the left scapular region. The tumor mass was seen to have multiple cystic components with fluid-fluid levels. Histological examination showed multiple cystic spaces filled with blood lakes and hemosiderin deposits in the solid part of the tumor. After the initial surgery, the patient had local recurrences over 2.5 years. The immunohistochemical study at the second surgery showed that the recurrent tumor was strongly positive for the histiocytic marker CD68, and the myoid trait desmin. Histological diagnosis was compatible with angiomatoid fibrous histiocytoma. (orig.)

  16. In situ groundwater bioremediation

    Energy Technology Data Exchange (ETDEWEB)

    Hazen, Terry C.

    2009-02-01

    In situ groundwater bioremediation of hydrocarbons has been used for more than 40 years. Most strategies involve biostimulation; however, recently bioaugmentation have been used for dehalorespiration. Aquifer and contaminant profiles are critical to determining the feasibility and strategy for in situ groundwater bioremediation. Hydraulic conductivity and redox conditions, including concentrations of terminal electron acceptors are critical to determine the feasibility and strategy for potential bioremediation applications. Conceptual models followed by characterization and subsequent numerical models are critical for efficient and cost effective bioremediation. Critical research needs in this area include better modeling and integration of remediation strategies with natural attenuation.

  17. Fibrous dysplasia of the ethmoid sinus.

    Science.gov (United States)

    Tsai, Tung-Lung; Ho, Ching-Yin; Guo, Yuan-Ching; Chen, Winby; Lin, Ching-Zong

    2003-02-01

    Although craniofacial bone is the second common site of fibrous dysplasia involvement, it is rarely found in the paranasal sinus. Among fibrous dysplasia of the head and neck, the maxilla and mandible are the most frequent sites to be involved. Fibrous dysplasia becomes dormant in adolescence and early adult life and is more common in female. It is one of the fibrous osseous lesions and should be differentiated from osteoma and ossifying fibroma. Radiographically, fibrous dysplasia showed "groundglass" bone appearance on CT scans with bone window. Histopathologically, it presents woven-type bone embedded in a cellular fibrous stroma without osteoblastic rimming. We presented a case of 25-year-old female with fibrous dysplasia in her right side ethmoid sinus. She visited to us with the chief complaint of right side headache since adolescence. The lesion was removed by endoscopic sinus surgery and pathology proved fibrous dysplasia. The patient was free of headache after operation. The advance of endoscopic sinus surgical technique, makes it an optimal method for the pathological diagnosis and treatment to avoid the cosmetic problems caused by external approach in limited paranasal sinus fibrous osseous lesions.

  18. Uranium in situ leaching

    International Nuclear Information System (INIS)

    1993-09-01

    Despite the depressed situation that has affected the uranium industry during the past years, the second Technical Committee Meeting on Uranium In Situ Leaching, organized by the International Atomic Energy Agency and held in Vienna from 5 to 8 October 1992, has attracted a relatively large number of participants. A notable development since the first meeting was that the majority of the contributions came from the actual operators of in situ leaching uranium production. At the present meeting, presentations on operations in the USA were balanced by those of the eastern European and Asian countries. Contributions from Bulgaria, China, Czechoslovakia, Germany (from the operation in the former German Democratic Republic), the Russian Federation and Uzbekistan represent new information not commonly available. In situ leach mining is defined in one of the paper presented as a ''mining method where the ore mineral is preferentially leached from the host rock in place, or in situ, by the use of leach solutions, and the mineral value is recovered. Refs, figs and tabs

  19. Sex in situ

    DEFF Research Database (Denmark)

    Krøgholt, Ida

    2017-01-01

    Sex er en del af vores sociale praksis og centralt for det, vi hver især er. Men bortset fra pornoindustrien, har vi ikke mange muligheder for at få adgang til billeder af sex. Teater Nordkrafts forestilling Sex in situ vil gøre seksuelle billeder til noget, der kan deles, udveksles og tales om, og...

  20. In Situ Cometary Cosmochemistry

    Science.gov (United States)

    Wright, I. P.; Andrews, D. J.; Barber, S. J.; Sheridan, S.; Morgan, G. H.; Morse, A. D.

    2013-09-01

    In 2014 the Rosetta space mission arrives at comet 67P. Herein we describe the ambitions of one of the instruments, Ptolemy, included on the lander. Our aim is to make in situ measurements of isotopic compositions of elements such as H, C, N and O.

  1. Electrospun fibrous scaffolds with continuous gradations in mineral contents and biological cues for manipulating cellular behaviors.

    Science.gov (United States)

    Zou, Bin; Liu, Yaowen; Luo, Xiaomin; Chen, Fang; Guo, Xueqin; Li, Xiaohong

    2012-04-01

    Challenges remain in the generation of heterogeneous tissues and the repairing of interfacial tissue between soft and hard tissues. The development of tissue engineering scaffolds with gradients in composition, structure, mechanical and chemical properties is essential to modulate cellular behaviors in a graded way and potentially support the growth of functionally graded tissues. Integrated with the three-dimensional (3-D) nanofibrous skeletal structure of native extracellular matrix, electrospun fibers with gradients in amino groups were generated in the current study through an aminolysis process by using a microinfusion pump. Gelatin grafts were constructed to create fibrous scaffolds with gradients in hydroxyapatite (HA) contents, crystal size and mechanical properties through in situ mineralization. Plasmid DNA (pDNA) was included during the mineralization process, and gradations in pDNA loading contents were created on fibrous scaffolds on the basis of HA gradients. Obvious gradients in cell density, osteoblastic differentiation and collagen deposition were demonstrated along the long axis of fibrous mats after cell seeding. Gradients in the amount of pDNA released and the expression of target proteins were indicated on the fibrous mats, which offered a temporally and spatially controlled delivery of growth factors in scaffolds. The creation of gradient futures on 3-D fibrous scaffolds may provide physical, chemical and biological cues and result in efficient regeneration of tissues with spatial distributions of the cell proliferation, differentiation, and matrix secretion. Copyright © 2012 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

  2. Composite fibrous glaucoma drainage implant

    Science.gov (United States)

    Klapstova, A.; Horakova, J.; Shynkarenko, A.; Lukas, D.

    2017-10-01

    Glaucoma is a frequent reason of loss vision. It is usually caused by increased intraocular pressure leading to damage of optic nerve head. This work deals with the development of fibrous structure suitable for glaucoma drainage implants (GDI). Commercially produced metallic glaucoma implants are very effective in lowering intraocular pressure. However, these implants may cause adverse events such as damage to adjacent tissue, fibrosis, hypotony or many others [1]. The aim of this study is to reduce undesirable properties of currently produced drains and improve their properties by creating of the composite fibrous drain for achieve a normal intraocular pressure. Two types of electrospinning technologies were used for the production of very small tubular implants. First type was focused for production of outer part of tubular drain and the second type of electrospinning method made the inner part of shape follows the connections of both parts. Complete implant had a special properties suitable for drainage of fluid. Morphological parameters, liquid transport tests and in-vitro cell adhesion tests were detected.

  3. In-Situ Simulation

    DEFF Research Database (Denmark)

    Bjerregaard, Anders Thais; Slot, Susanne; Paltved, Charlotte

    2015-01-01

    offered in situ simulation faculty with a model for integrating reported critical incidents and adverse events with contextual needs analysis and short-term observations. Furthermore the research group is working on detailing the barriers of in situ simulation such as resources for team training despite...... emergencies. It contains 12 questions, which are rated using a five-point scale, and covers four categories; leadership, teamwork and task management, and an overall score on team performance. Results: 16 simulations were conducted with 16 different teams of 10 doctors and 32 nurses. First, this study took...... of handovers. The team performance varied greatly according to how well the team members knew each other professionally as confirmed by video recordings. SAQ, and TEAM observational data are being analyzed by the research group with focus on correlation with teamwork and handovers. In summary, this study...

  4. Solitary fibrous tumor of the orbit presenting in pregnancy.

    Science.gov (United States)

    Das, Jayanta K; Sharma, Angshuman Sen; Deka, Akshay Ch; Das, Dipankar

    2009-01-01

    A 32-year-old woman, three months pregnant, reported with the complaint of protrusion of the right eye for six months. She gave history of rapid protrusion of eyeball for the last two months along with the history of double vision for the last one month. Computer tomography (CT) scan revealed a well-defined mass lesion in the intraconal space of the right orbit which was excised through a lateral orbitotomy approach. Histological examination and immunohistochemistry revealed a solitary fibrous tumor, which showed a rapid progression in pregnancy.

  5. In Situ Mass Spectrometer Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The In Situ Mass Spectrometer projects focuses on a specific subsystem to leverage advanced research for laser-based in situ mass spectrometer development...

  6. Paget's disease and fibrous dysplasia.

    Science.gov (United States)

    Hullar, Timothy E; Lustig, Lawrence R

    2003-08-01

    Paget's disease and fibrous dysplasia are benign disorders that can involve the temporal bone and skull base. They commonly lead to otolaryngologic symptoms such as impingement of cranial nerves or the orbit or blockage of the external auditory canal or paranasal sinuses, although they can often be a challenge to diagnose because of their insidious presentation. Their benign nature and common presentation within the difficult-to-access confines of the skull base should lead the clinician to exercise caution in their treatment, reserving surgical intervention for either diagnosis or the relief of symptoms. As a better understanding of the etiology of these conditions develops and new pharmacotherapeutic agents are tested, it is likely that physicians will be able to turn to medical rather than surgical techniques to treat these disorders.

  7. Posttraumatic Cranial Cystic Fibrous Dysplasia

    Directory of Open Access Journals (Sweden)

    Arata Tomiyama

    2011-01-01

    Full Text Available A 14-year-old was girl admitted to our hospital with a subcutaneous mass of the occipital head. The mass had grown for 6 years, after she had sustained a head injury at the age of 6, and was located directly under a previous wound. Skull X-ray Photograph (xp, computed tomography (CT, and magnetic resonance imaging (MRI showed a bony defect and cystic changes in the skull corresponding to a subcutaneous mass. Bone scintigraphy revealed partial accumulation. The patient underwent total removal of the skull mass, and the diagnosis from the pathological findings of the cyst wall was fibrous dysplasia (FD. The radiographic findings for cystic cranial FD can be various. Progressive skull disease has been reported to be associated with head trauma, but the relationship between cranial FD and head trauma has not been previously reported. Previous studies have suggested that c-fos gene expression is a key mechanism in injury-induced FD.

  8. Nutritional fibrous osteodystrophy in goats

    Directory of Open Access Journals (Sweden)

    Paulo M Bandarra

    2011-10-01

    Full Text Available Seven out of 25 goats from a southern Brazilian flock developed nutritional fibrous osteodystrophy. Affected animals were younger than 1 year of age and were confined in stalls and fed a concentrate ration containing 1:6 calcium:phosphorus ratio. The remaining flock (35 goats was managed at pasture and showed no disease. Clinical signs were characterized by mandibular and maxillary enlargements, varying degrees of mouth opening and protruding tongue, dyspnea, apart of abnormalities of prehension and mastication. Affected animals had increased seric levels of phosphorus and parathormone, as well as higher alkaline phosphatase activity. Postmortem examination on three succumbed goats revealed bilateral enlargement of the maxilla and mandibula, and loose teeth, apart of multiple incomplete rib fractures in one of them. Severe diffuse proliferation of loose connective tissue surrounded the osteoid trabeculae, many of which were partially or completely non-mineralized. Mineralized osteoid trabeculae showed osteoclasts in the Howship's lacunae.

  9. Fibrous-Ceramic/Aerogel Composite Insulating Tiles

    Science.gov (United States)

    White, Susan M.; Rasky, Daniel J.

    2004-01-01

    Fibrous-ceramic/aerogel composite tiles have been invented to afford combinations of thermal-insulation and mechanical properties superior to those attainable by making tiles of fibrous ceramics alone or aerogels alone. These lightweight tiles can be tailored to a variety of applications that range from insulating cryogenic tanks to protecting spacecraft against re-entry heating. The advantages and disadvantages of fibrous ceramics and aerogels can be summarized as follows: Tiles made of ceramic fibers are known for mechanical strength, toughness, and machinability. Fibrous ceramic tiles are highly effective as thermal insulators in a vacuum. However, undesirably, the porosity of these materials makes them permeable by gases, so that in the presence of air or other gases, convection and gas-phase conduction contribute to the effective thermal conductivity of the tiles. Other disadvantages of the porosity and permeability of fibrous ceramic tiles arise because gases (e.g., water vapor or cryogenic gases) can condense in pores. This condensation contributes to weight, and in the case of cryogenic systems, the heat of condensation undesirably adds to the heat flowing to the objects that one seeks to keep cold. Moreover, there is a risk of explosion associated with vaporization of previously condensed gas upon reheating. Aerogels offer low permeability, low density, and low thermal conductivity, but are mechanically fragile. The basic idea of the present invention is to exploit the best features of fibrous ceramic tiles and aerogels. In a composite tile according to the invention, the fibrous ceramic serves as a matrix that mechanically supports the aerogel, while the aerogel serves as a low-conductivity, low-permeability filling that closes what would otherwise be the open pores of the fibrous ceramic. Because the aerogel eliminates or at least suppresses permeation by gas, gas-phase conduction, and convection, the thermal conductivity of such a composite even at

  10. Malignant mesothelioma in situ.

    Science.gov (United States)

    Churg, Andrew; Hwang, Harry; Tan, Larry; Qing, Gefei; Taher, Altaf; Tong, Amy; Bilawich, Ana M; Dacic, Sanja

    2018-05-01

    The existence of malignant mesothelioma in situ (MIS) is often postulated, but there are no accepted morphological criteria for making such a diagnosis. Here we report two cases that appear to be true MIS on the basis of in-situ genomic analysis. In one case the patient had repeated unexplained pleural unilateral effusions. Two thoracoscopies 9 months apart revealed only visually normal pleura. Biopsies from both thoracoscopies showed only a single layer of mildly reactive mesothelial cells. However, these cells had lost BRCA1-associated protein 1 (BAP1) and showed loss of cyclin-dependent kinase inhibitor 2 (CDKN2A) (p16) by fluorescence in-situ hybridisation (FISH). NF2 was not deleted by FISH but 28% of the mesothelial cells showed hyperploidy. Six months after the second biopsy the patient has persisting effusions but no evidence of pleural malignancy on imaging. The second patient presented with ascites and minimal omental thickening on imaging, but no visual evidence of tumour at laparoscopy. Omental biopsy showed a single layer of minimally atypical mesothelial cells with rare tiny foci of superficial invasion of fat. BAP1 immunostain showed loss of nuclear BAP1 in all the surface mesothelial cells and the invasive cells. There was CDKN2A deletion, but no deletion of NF2 by FISH. These cases show that morphologically bland single-layered surface mesothelial proliferations with molecular alterations seen previously only in invasive malignant mesotheliomas exist, and presumably represent malignant MIS. More cases are need to understand the frequency of such changes and the time-course over which invasive tumour develops. © 2018 John Wiley & Sons Ltd.

  11. In situ breast cancer

    International Nuclear Information System (INIS)

    Pacheco, Luis

    2004-01-01

    In situ breast cancer, particularly the ductal type, is increasing in frequency in the developed countries as well as in Ecuador, most probably. These lesions carry a higher risk of developing a subsequent invasive cancer. Treatment has changed recently due to results of randomized studies, from classical mastectomy to conservative surgery associated to radiotherapy. The Van Nuys Prognostic Index is currently the most usual instrument to guide diagnosis and treatment. Tamoxifen seems to decrease significantly the risk of tumor recurrence after initial treatment. (The author)

  12. Solitary Fibrous Tumor of the Uterus

    Directory of Open Access Journals (Sweden)

    Po-Wei Chu

    2006-12-01

    Conclusion: The behavior of solitary fibrous tumors arising from the uterus is difficult to evaluate; therefore, complete surgical excision featuring clear margins and comprehensive follow-up is recommended.

  13. Evaluation and histological maturation characteristics of fibrous ...

    African Journals Online (AJOL)

    osseous lesions (FOLS) that are generally considered to be separate entities distinguishable by histologic and radiographic features. The histological maturation of these lesions involves an initial fibrous state, an intermediate mixed and a final ...

  14. Isolated fibrous dysplasia of the sphenoid sinus.

    Science.gov (United States)

    Buyuklu, Fuat; Tarhan, Erkan; Cakmak, Ozcan; Ozgirgin, Nuri; Arikan, Unser

    2005-12-01

    Fibrous dysplasia is an uncommon benign bone disorder of unknown etiology in which normal medullary bone is replaced by fibrotic and osseous tissue. Solitary involvement of the sphenoid sinus is unusual. Here, we present the case of a 28-year-old man complaining of occipital and vertical headache. Imaging modalities demonstrated an expansile lesion filling the entire sphenoid sinus. Biopsy specimen was obtained by endoscopic sphenoidotomy. Diagnosis of fibrous dysplasia was made by imaging results and pathologic examination.

  15. Aggressive fibrous dysplasia of the maxillary sinus

    Energy Technology Data Exchange (ETDEWEB)

    Shapeero, L.G. (Dept. of Radiology, Inst. Gustave-Roussy, Villejuif (France) Dept. of Radiology, California Univ., San Francisco, CA (United States)); Vanel, D. (Dept. of Radiology, Inst. Gustave-Roussy, Villejuif (France)); Ackerman, L.V. (Dept. of Pathology, State Univ. of New York, Stony Brook, NY (United States)); Terrier-Lacombe, M.J. (Dept. of Radiology, Inst. Gustave-Roussy, Villejuif (France)); Housin, D. (Dept. of Radiology, Inst. Gustave-Roussy, Villejuif (France)); Schwaab, G. (Dept. of Ear, Nose, and Throat, Inst. Gustave-Roussy, Villejuif (France)); Sigal, R. (Dept. of Radiology, Inst. Gustave-Roussy, Villejuif (France)); Masselot, J. (Dept. of Radiology, Inst. Gustave-Roussy, Villejuif (France))

    1993-11-01

    Five of 34 patients (ages 4-21 years), who were subsequently diagnosed histologically as having fibrous dysplasia of the maxillary sinus, rapidly developed soft tissue masses of the malar region over a period of less than 4 months with accompanying pain (2 patients) and nasal obstruction and exophthalmos (2 patients). Each was clinically suspected of having a sarcoma. After resection, all lesions developed regrowth. At histopathologic examination, both initial and recurrent masses proved to be typical fibrous dysplasia. (orig./UWA)

  16. Isolated fibrous dysplasia of the ethmoid sinus

    OpenAIRE

    Yenigun, Alper; Akyuz, Servet

    2015-01-01

    Fibrous dysplasia is a benign fibro-osseous lesion progressing with one or more bone involvements in the skeleton. Even though it is a benign tumor, it may potentially transform into a malignant one. While the most frequently involved zones in the head–neck zone include the maxilla, mandible, parietal, occipital, and temporal zones, the involvement of the ethmoid bone is rather rare. This article presents the case of a female patient who was diagnosed with fibrous dysplasia in the right ethmo...

  17. Aggressive fibrous dysplasia of the maxillary sinus

    International Nuclear Information System (INIS)

    Shapeero, L.G.; Vanel, D.; Ackerman, L.V.; Terrier-Lacombe, M.J.; Housin, D.; Schwaab, G.; Sigal, R.; Masselot, J.

    1993-01-01

    Five of 34 patients (ages 4-21 years), who were subsequently diagnosed histologically as having fibrous dysplasia of the maxillary sinus, rapidly developed soft tissue masses of the malar region over a period of less than 4 months with accompanying pain (2 patients) and nasal obstruction and exophthalmos (2 patients). Each was clinically suspected of having a sarcoma. After resection, all lesions developed regrowth. At histopathologic examination, both initial and recurrent masses proved to be typical fibrous dysplasia. (orig./UWA)

  18. Modelling and analysing oriented fibrous structures

    International Nuclear Information System (INIS)

    Rantala, M; Lassas, M; Siltanen, S; Sampo, J; Takalo, J; Timonen, J

    2014-01-01

    A mathematical model for fibrous structures using a direction dependent scaling law is presented. The orientation of fibrous nets (e.g. paper) is analysed with a method based on the curvelet transform. The curvelet-based orientation analysis has been tested successfully on real data from paper samples: the major directions of fibrefibre orientation can apparently be recovered. Similar results are achieved in tests on data simulated by the new model, allowing a comparison with ground truth

  19. Fibrous incudostapedial joint in congenital aural atresia.

    Science.gov (United States)

    Balaker, Ashley E; Roberson, Joseph B; Goldsztein, Hernan

    2014-04-01

    (1) Determine the prevalence of a non-bony or fibrous incudostapedial (IS) joint in the setting of congenital aural atresia. (2) Assess this anomaly's impact on surgical management and associated hearing outcomes. Retrospective chart review. Subspecialty private practice. Operative reports and audiometric data of patients who underwent congenital aural atresia repair by a single surgeon from 2007 to 2011 were reviewed for operative anatomic findings and audiometric outcomes. Two hundred twenty-eight operations on 206 ears were performed. Median age was 5 years old. Fifty-five (26.7%) of these ears had a fibrous IS joint. The severity of this anomaly was graded as mild in 23 ears, moderate in 20 ears, and severe in 12 ears. Mean postoperative pure tone air conduction (PTA2) in the severely fibrous group was 51 compared to 46 in the moderate group (P = .03) and 41 in the mild group (P = .006). Patients with a fibrous IS joint who underwent successful ossicular chain reconstruction (OCR) had a mean postoperative PTA2 of 30, which was a significantly better outcome than in patients with moderately or severely fibrous IS joints who did not have OCR (P atresia. The severity of this anomaly has important implications for postoperative hearing results. These findings suggest that ossicular chain reconstruction should be performed in moderately or severely fibrous cases.

  20. In situ measurement system

    Science.gov (United States)

    Lord, D.E.

    1980-11-24

    A multipurpose in situ underground measurement system comprising a plurality of long electrical resistance elements in the form of rigid reinforcing bars, each having an open loop hairpin configuration of shorter length than the other resistance elements. The resistance elements are arranged in pairs in a unitized structure, and grouted in place in the underground volume. Measurement means are provided for obtaining for each pair the electrical resistance of each element and the difference in electrical resistance of the paired elements, which difference values may be used in analytical methods involving resistance as a function of temperature. A scanner means sequentially connects the resistance-measuring apparatus to each individual pair of elements. A source of heating current is also selectively connectable for heating the elements to an initial predetermined temperature prior to electrical resistance measurements when used as an anemometer.

  1. In situ zymography.

    Science.gov (United States)

    George, Sarah J; Johnson, Jason L

    2010-01-01

    In situ zymography is a unique laboratory technique that enables the localisation of matrix-degrading metalloproteinase (MMP) activity in histological sections. Frozen sections are placed on glass slides coated with fluorescently labelled matrix proteins. After incubation MMP activity can be observed as black holes in the fluorescent background due to proteolysis of the matrix protein. Alternatively frozen sections can be incubated with matrix proteins conjugated to quenched fluorescein. Proteolysis of the substrate by MMPs leads to the release of fluorescence. This technique can be combined with immunohistochemistry to enable co-location of proteins such as cell type markers or other proteins of interest. Additionally, this technique can be adapted for use with cell cultures, permitting precise location of MMP activity within cells, time-lapse analysis of MMP activity and analysis of MMP activity in migrating cells.

  2. In-Situ

    Science.gov (United States)

    Sasayama, Kohki; Hayashi, Tetsushi; Kohno, Hideo

    2018-08-01

    Flattening of a carbon nanotube with a switching of the flattening direction results in the formation of a nanotetrahedron/nanoribbon structure. In this study, behavior of individual carbon nanotetra-hedron/nanoribbon structures under a tensile load is observed by means of in-situ scanning electron microscopy using micro-manipulators. Positions of breakage caused by a tensile load are not necessarily at a nanotetrahedron/nanoribbon junction. The results indicate that the nanotetrahedron/nanoribbon junctions are not mechanical weak points under a tensile load, and the nanotetra-hedron/nanoribbon structures are as strong as simple multi-walled carbon nanotubes. In addition, the nanostructures maintain their shape and do not transformed to a tubular form.

  3. Modeling in situ vitrification

    International Nuclear Information System (INIS)

    Mecham, D.C.; MacKinnon, R.J.; Murray, P.E.; Johnson, R.W.

    1990-01-01

    In Situ Vitrification (ISV) process is being assessed by the Idaho National Engineering Laboratory (INEL) to determine its applicability to transuranic and mixed wastes buried at INEL'S Subsurface Disposal Area (SDA). This process uses electrical resistance heating to melt waste and contaminated soil in place to produce a durable glasslike material that encapsulates and immobilizes buried wastes. This paper outlines the requirements for the model being developed at the INEL which will provide analytical support for the ISV technology assessment program. The model includes representations of the electric potential field, thermal transport with melting, gas and particulate release, vapor migration, off-gas combustion and process chemistry. The modeling objectives are to help determine the safety of the process by assessing the air and surrounding soil radionuclides and chemical pollution hazards, the nuclear criticality hazard, and the explosion and fire hazards, help determine the suitability of the ISV process for stabilizing the buried wastes involved, and help design laboratory and field tests and interpret results. 3 refs., 2 figs., 1 tab

  4. Pseudotumoral fibrous dysplasia of the maxilla

    International Nuclear Information System (INIS)

    Vanel, D.; Couanet, D.; Piekarski, J.D.; Masselot, J.; Micheau, C.; Schwaab, G.

    1980-01-01

    Clinical, radiological, and histological problems arise relating to fibrous dysplasia of the maxilla. Clinically, 11 of our 39 cases developed so rapidly that the lesions were suspected of being malignant. The histological diagnosis may be very difficult, since any tumoural, reactive, or healing process may simulate fibrous dysplasia. As a general rule, the diagnosis is established most easily by the radiological examination. The radiologist's responsibility is important, as mistakes may have serious consequences. We report four pseudotumoural forms of maxillary sinus fibrous dysplasia. All were characterised clinically by rapid evolution, radiologically by opacity of the sinus with apparent destruction of its wall, and histologically by difficulty in establishing the diagnosis. In two cases indeed, the initial histological interpretation was an osteogenic sarcoma. Due to its excellent densitometric resolution, computed tomography provides an invaluable contribution by displaying the fibrous wall of an intact or even thickened maxillary sinus when conventional radiology has suggested a destructive process. In difficult cases of maxillary fibrous dysplasia, computed tomography should be used as a supplementary investigation to establish the correct diagnosis. (orig.) [de

  5. Congenital fibrous hamartoma of the knee

    International Nuclear Information System (INIS)

    Arioni, Cesare; Bellini, Carlo; Risso, Francesco Maria; Scopesi, Fabio; Serra, Giovanni; Oddone, Mauro; Toma, Paolo; Nozza, Paolo

    2006-01-01

    A full-term male infant presented at birth with a hard swelling of the left knee. The lemon-sized lesion was fixed to the underlying knee muscles, while the overlying skin was stretched and shiny; there was no bruit. Radiography, sonography and MRI suggested a soft-tissue tumour. After surgical excision, histology showed the presence of fibrous and mesenchymal tissue, with mature adipose tissue. Fibrous hamartoma of infancy was diagnosed. Among soft-tissue tumours, fibrous hamartoma of infancy is a rare and benign lesion, occurring in the first 2 years of life. The tumour mainly affects the trunk, axilla, and upper extremities. This infant had unique involvement of the knee. The treatment of choice is local excision. (orig.)

  6. CT Imaging of Craniofacial Fibrous Dysplasia

    Directory of Open Access Journals (Sweden)

    Zerrin Unal Erzurumlu

    2015-01-01

    Full Text Available Fibrous dysplasia is a benign fibroosseous bone dysplasia that can involve single (monostotic or multiple (polyostotic bones. Monostotic form is more frequent in the jaws. It is termed as craniofacial fibrous dysplasia, when it involves, though rarely, adjacent craniofacial bones. A 16-year-old girl consulted for a painless swelling in the right posterior mandible for two years. Panoramic radiography revealed ground-glass ill-defined lesions in the three different regions of the maxilla and mandible. Axial CT scan (bone window showed multiple lesions involving skull base and facial bones. Despite lesions in the skull base, the patient had no abnormal neurological findings. The lesion was diagnosed as fibrous dysplasia based on radiological and histopathological examination. In this paper, CT findings and differential diagnosis of CFD are discussed. CT is a useful imaging technique for CFD cases.

  7. Craniofacial Fibrous Dysplasia of Zygomaticomaxillary Complex.

    Science.gov (United States)

    Nilesh, Kumar; Punde, Prashant; Parkar, M I

    2017-09-01

    Fibrous dysplasia is a benign bone disease first described by Lichtenstein in 1938. It is characterized by progressive replacement of normal bone with fibro-osseous connective tissue. When the disease involves craniofacial skeleton, it results in significant disfigurement and other functional problems. This paper reports a case of large craniofacial fibrous dysplasia involving zygomaticomaxillary complex in a 24-year old male patient. Clinical presentation and imaging characteristics of the pathology is discussed in detail. The disease caused significant facial asymmetry which was satisfactorily managed by surgical recontouring.

  8. Isolated fibrous dysplasia of the ethmoid sinus.

    Science.gov (United States)

    Yenigun, Alper; Akyuz, Servet

    2015-01-01

    Fibrous dysplasia is a benign fibro-osseous lesion progressing with one or more bone involvements in the skeleton. Even though it is a benign tumor, it may potentially transform into a malignant one. While the most frequently involved zones in the head-neck zone include the maxilla, mandible, parietal, occipital, and temporal zones, the involvement of the ethmoid bone is rather rare. This article presents the case of a female patient who was diagnosed with fibrous dysplasia in the right ethmoid sinus based on the paranasal computerized tomography scan that was taken due to the symptoms of pain around the right eye, pressure, and a feeling of being pushed.

  9. A case of intracranial malignant fibrous histiocytoma

    Directory of Open Access Journals (Sweden)

    Amir Hossein Sarrami

    2011-01-01

    Full Text Available We describe a case of intracranial malignant fibrous histiocytoma which had infiltrated pons, cerebellum and basal surface of left temporal lobe without any visible mass. The patient presented with a sudden loss of consciousness and vomiting. Clinical findings, laboratory tests, imaging and examination of the cerebrospinal fluid tended to establish the diagnosis of an infectious condition than a malignancy. Without any response to the antibiotics and with a progressive deterioration of neurologic and mental condition, the patient died after 20 days. In the autopsy, histological and immunohistochemical study of the brain revealed the diagnosis of malignant fibrous histiocytoma (MFH.

  10. Fibrous Protein Structures: Hierarchy, History and Heroes.

    Science.gov (United States)

    Squire, John M; Parry, David A D

    2017-01-01

    During the 1930s and 1940s the technique of X-ray diffraction was applied widely by William Astbury and his colleagues to a number of naturally-occurring fibrous materials. On the basis of the diffraction patterns obtained, he observed that the structure of each of the fibres was dominated by one of a small number of different types of molecular conformation. One group of fibres, known as the k-m-e-f group of proteins (keratin - myosin - epidermin - fibrinogen), gave rise to diffraction characteristics that became known as the α-pattern. Others, such as those from a number of silks, gave rise to a different pattern - the β-pattern, while connective tissues yielded a third unique set of diffraction characteristics. At the time of Astbury's work, the structures of these materials were unknown, though the spacings of the main X-ray reflections gave an idea of the axial repeats and the lateral packing distances. In a breakthrough in the early 1950s, the basic structures of all of these fibrous proteins were determined. It was found that the long protein chains, composed of strings of amino acids, could be folded up in a systematic manner to generate a limited number of structures that were consistent with the X-ray data. The most important of these were known as the α-helix, the β-sheet, and the collagen triple helix. These studies provided information about the basic building blocks of all proteins, both fibrous and globular. They did not, however, provide detailed information about how these molecules packed together in three-dimensions to generate the fibres found in vivo. A number of possible packing arrangements were subsequently deduced from the X-ray diffraction and other data, but it is only in the last few years, through the continued improvements of electron microscopy, that the packing details within some fibrous proteins can now be seen directly. Here we outline briefly some of the milestones in fibrous protein structure determination, the role of the

  11. Locally Aggressive Fibrous Dysplasia Mimicking Malign Calvarial Lesion.

    Science.gov (United States)

    Ogul, Hayri; Keskin, Emine

    2018-05-01

    Fibrous dysplasia is an unusual benign bone tumor. It is divided into 3 groups as monostotic, polyostotic, and craniofacial form. The authors reported an unusual patient with fibrous dysplasia with an aggressive radiologic appearance.

  12. Extraction of uranium from seawater by the fibrous composite adsorbent

    International Nuclear Information System (INIS)

    Katoh, Shunsaku; Sugasaka, Kazuhiko; Nogi, Tatsuo; Yoshizumi, Nobuo; Mima, Kooji.

    1986-01-01

    The fibrous composite adsorbents consisting of hydrous titanium oxide and activated carbon were prepared with hydrophilic polyacrylonitrile system polymer as a binder under various conditions, and the adsorptive property of the fibrous composite adsorbents for uranium from seawater was examined. The fibrous composite adsorbents which spun under high pressure (10 kg/cm 2 ) was the finest having the largest pore volume. In addition, the amount of uranium adsorbed of the fibrous adsorbent was the largest. The rate of uranium adsorption by the fibrous adsorbent was the same as the rate of uranium adsorption by the powdery adsorbent. The excellent fibrous adsorbent adsorbed 0.23 mg U/g adsorbent for 10 d and 0.65 mg U/g adsorbent for 100 d. The rate of uranium desorption from the fibrous adsorbent by alkali carbonate solution was large, and the uranium in the fibrous adsorbent desorbed 75 % for 8 h and about 100 % for 24 h. (author)

  13. In Situ Planetary Geochronology Technology

    Data.gov (United States)

    National Aeronautics and Space Administration — This project's purpose was to determine whether a Pulsed Neutron Generator (PNG) could be used in an instrument that could perform in situ age dating of planetary...

  14. [Fibrous dysplasia of the frontal sinus: a case report].

    Science.gov (United States)

    Keleş, Erol; Kaplama, Mehmet Erkan; Ozkara, Sule; Cobanoğlu, Bengü

    2011-01-01

    Fibrous dysplasia is a rare and indolent benign tumor of bone. Although it is a benign tumor, it has malignant transformation potential. Fibrous dysplasia can involve a single or multiple bones. The maxilla and mandible are the most common sites in the head and neck region. Paranasal sinus involvement is rare. Surgical excision is the preferred treatment of patients with symptomatic fibrous dysplasia. In this article, a 54-year-old male patient diagnosed with fibrous dysplasia of the frontal bone is presented.

  15. In Situ Activation of Microcapsules

    Science.gov (United States)

    Morrison, Dennis R. (Inventor); Mosier, Benjamin (Inventor)

    2000-01-01

    Disclosed are microcapsules comprising a polymer shell enclosing two or more immiscible liquid phases in which a drug, or a prodrug and a drug activator are partitioned into separate phases. or prevented from diffusing out of the microcapsule by a liquid phase in which the drug is poorly soluble. Also disclosed are methods of using the microcapsules for in situ activation of drugs where upon exposure to an appropriate energy source the internal phases mix and the drug is activated in situ.

  16. Evaluation and histological maturation characteristics of fibrous ...

    African Journals Online (AJOL)

    Evaluation and histological maturation characteristics of fibrous dysplasia and ossifying fibroma: a case series. ... diagnosed as OF and FD were retrieved from the archival records of the Departments of Oral Surgery/Oral Pathology and Histopathology/Morbid Anatomy, Muhimbili University of Health and Allied Sciences.

  17. Steam Reformer With Fibrous Catalytic Combustor

    Science.gov (United States)

    Voecks, Gerald E.

    1987-01-01

    Proposed steam-reforming reactor derives heat from internal combustion on fibrous catalyst. Supplies of fuel and air to combustor controlled to meet demand for heat for steam-reforming reaction. Enables use of less expensive reactor-tube material by limiting temperature to value safe for material yet not so low as to reduce reactor efficiency.

  18. Apparatus for processing fibrous pulp material

    NARCIS (Netherlands)

    Dekker, J.C.; Bouma, H.; Mulder, F.B.M.

    2008-01-01

    The invention relates to an apparatus (1) for processing a flow of pulp comprising fibrous material, in particular pulp comprising cellulose fibres for making paper, said apparatus comprising a drum (2) having a rotational axis (R), an inlet end (3), an outlet end (4) and an inner surface, a

  19. MRI of intracranial meningeal malignant fibrous histiocytoma

    International Nuclear Information System (INIS)

    Ogino, A.; Ochi, M.; Hayashi, K.; Hirata, K.; Hayashi, T.; Yasunaga, A.; Shibata, S.

    1996-01-01

    We describe the CT and MRI findings in a patient with primary intracranial meningeal malignant fibrous histiocytoma (MFH). CT delineated the anatomical relations and MRI aided in tissue characterisation. To our knowledge, this is the first report describing the MRI findings in primary intracranial meningeal MFH. (orig.). With 1 fig

  20. Ductile-brittle transition in transverse isotropic fibrous networks

    Science.gov (United States)

    Luo, Guoquan; Shi, Liping; Li, Mingwei; Zhong, Yesheng; He, Xiaodong; Wang, Jiazhi

    2018-01-01

    Anisotropic fibrous networks, especially transverse isotropic fibrous networks, are widely used to model the microstructures of biological tissues, polymer gels, fibrous thermal insulations, and other fibrous materials. In this letter, we build a three-dimensional transverse isotropic fibrous network model and study its mechanical properties along the through-thickness direction. We propose a measurement of anisotropy for transverse isotropic fibrous networks and then study the influence of anisotropy on the networks' mechanical properties, including its elastic modulus, maximum elongation, and stress-strain curve, by means of finite-element simulation. We also study theoretically the influence of anisotropy on maximum elongation. We find that as the anisotropy of the networks becomes stronger, the elastic modulus decreases and the maximum elongation increases, indicating a transition in mechanical properties from brittle to ductile. We identify this transition as the "ductile-brittle transition." This transition can help guide the design and regulate the mechanical properties of a transverse isotropic fibrous network.

  1. In situ microbial filter used for bioremediation

    Science.gov (United States)

    Carman, M. Leslie; Taylor, Robert T.

    2000-01-01

    An improved method for in situ microbial filter bioremediation having increasingly operational longevity of an in situ microbial filter emplaced into an aquifer. A method for generating a microbial filter of sufficient catalytic density and thickness, which has increased replenishment interval, improved bacteria attachment and detachment characteristics and the endogenous stability under in situ conditions. A system for in situ field water remediation.

  2. Isolated fibrous dysplasia of the ethmoid sinus

    Directory of Open Access Journals (Sweden)

    Alper Yenigun

    2015-01-01

    Full Text Available Fibrous dysplasia is a benign fibro-osseous lesion progressing with one or more bone involvements in the skeleton. Even though it is a benign tumor, it may potentially transform into a malignant one. While the most frequently involved zones in the head–neck zone include the maxilla, mandible, parietal, occipital, and temporal zones, the involvement of the ethmoid bone is rather rare. This article presents the case of a female patient who was diagnosed with fibrous dysplasia in the right ethmoid sinus based on the paranasal computerized tomography scan that was taken due to the symptoms of pain around the right eye, pressure, and a feeling of being pushed.

  3. The health of retired fibrous glass workers.

    Science.gov (United States)

    Enterline, P E; Henderson, V

    1975-03-01

    A total of 416 men, retiring during the period 1945 to 1972 from six plants engaged mainly in the manufacture of fibrous glass insulation, were studied to see how their mortality experience compared with that of white men in the entire United States living in comparable age and time intervals. The mean follow-up period from first exposure was about 30 years. Overall mortality was low and there was no evidence of an excess in respiratory cancer mortality. No mesotheliomas were noted. For 115 men retiring from the same six plants during the period 1945 to 1972 due to a disability the distribution of disabilities by cause was compared with an expected distribution based on the experience of the Social Security Administration. This comparison showed no evidence of any unusual health hazards among fibrous glass workers, except a possible excess in chronic bronchitis.

  4. Monostotic fibrous dysplasia with Raynaud's phenomenon.

    Science.gov (United States)

    Kumar, K V S Hari; Aravinda, K; Narayanan, K

    2015-01-01

    Fibrous dysplasia (FD) is a benign bone disorder characterized by alteration in bone morphology. Monostotic FD is the commonest variant and affects the craniofacial bones. Raynaud's phenomenon is recurrent vasospasm of the fingers and toes due to cold exposure. The disease is usually idiopathic or secondary to connective tissue disorders. Raynaud's phenomenon is not described previously with FD. We recently encountered two interesting patients of craniofacial monostotic FD with Raynaud's phenomenon and report the same in this report.

  5. Fibrous dysplasia of the paranasal sinuses.

    Science.gov (United States)

    Feldman, M D; Rao, V M; Lowry, L D; Kelly, M

    1986-09-01

    Fibrous dysplasia (FD) of the paranasal sinuses is rare and often presents a diagnostic challenge. It is usually secondary to extension of disease from adjacent bones and is rarely limited to the sinuses. We have described three cases of FD involving the paranasal sinuses, including the first reported case of FD isolated to the sphenoid sinus. A brief update of the clinical aspects, radiographic appearance, diagnosis, and management of craniofacial FD is provided.

  6. High surface area fibrous silica nanoparticles

    KAUST Repository

    Polshettiwar, Vivek

    2014-11-11

    Disclosed are high surface area nanoparticles that have a fibrous morphology. The nanoparticles have a plurality of fibers, wherein each fiber is in contact with one other fiber and each fiber has a length of between about 1 nm and about 5000 nm. Also disclosed are applications of the nanoparticles of the present invention, and methods of fabrication of the nanoparticles of the present invention.

  7. Complementary scintigraphy in polyostotic fibrous dysplasia

    International Nuclear Information System (INIS)

    Murray, I.P.C.; Haindl, W.; Frater, C.J.

    1996-01-01

    A 65-year-old man with a long history of right knee pain complained of discomfort in both hips. An X-ray has identified changes in the pelvis to indicate Paget's disease. Bone scintigraphy after administration of thallium-201 was performed to ascertain the extent of this disorder. The whole body sweep showed multiple areas of abnormal uptake of varying size and intensity. This finding excluded the possibility of malignant change such as osteogenic sarcoma and malignant fibrous hystiocytoma . 2 figs

  8. Postirradiation sarcoma (malignant fibrous histiocytoma) of axilla

    International Nuclear Information System (INIS)

    Hardy, T.J.; An, T.; Brown, P.W.; Terz, J.J.

    1978-01-01

    A case is reported of a patient who developed a histologically unusual sarcoma in the axilla and chest wall 8 years after receiving radiation therapy (6500 rad) for carcinoma of the breast. This sarcoma showed light- and electron-microscopic features of a malignant fibrous histiocytoma, a tumor not documented among 24 previously reported cases of postirradiation sarcoma following the diagnosis of breast carcinoma. In addition, the literature is reviewed and discussed regarding postirradiation sarcoma in general following breast carcinoma

  9. Toxicity and Carcinogenicity Mechanisms of Fibrous Antigorite

    Directory of Open Access Journals (Sweden)

    Michael Balazy

    2007-03-01

    Full Text Available We studied the effects of fibrous antigorite on mesothelial MeT-5A and monocyte-macrophage J774 cell lines to further understand cellular mechanisms induced by asbestos fibers leading to lung damage and cancer. Antigorite is a mineral with asbestiform properties, which tends to associate with chrysotile or tremolite, and frequently occurs as the predominant mineral in the veins of several serpentinite rocks found abundantly in the Western Alps. Particles containing antigorite are more abundant in the breathing air of this region than those typically found in urban ambient air. Exposure of MeT-5A and J774 cells to fibrous antigorite at concentrations of 5-100 μg/ml for 72 hr induced dose-dependent cytotoxicity. Antigorite also stimulated the ROS production, induced the generation of nitrite and PGE2. MeT-5A cells were more sensitive to antigorite than J774 cells. The results of this study revealed that the fibrous antigorite stimulates cyclooxygenase and formation of hydroxyl and nitric oxide radicals. These changes represent early cellular responses to antigorite fibers, which lead to a host of pathological and neoplastic conditions because free radicals and PGE2 play important roles as mediators of tumor pathogenesis. Understanding the mechanisms of the cellular responses to antigorite and other asbestos particles should be helpful in designing rational prevention and treatment approaches.

  10. Fibrous zinc anodes for high power batteries

    Science.gov (United States)

    Zhang, X. Gregory

    This paper introduces newly developed solid zinc anodes using fibrous material for high power applications in alkaline and large size zinc-air battery systems. The improved performance of the anodes in these two battery systems is demonstrated. The possibilities for control of electrode porosity and for anode/battery design using fibrous materials are discussed in light of experimental data. Because of its mechanical integrity and connectivity, the fibrous solid anode has good electrical conductivity, mechanical stability, and design flexibility for controlling mass distribution, porosity and effective surface area. Experimental data indicated that alkaline cells made of such anodes can have a larger capacity at high discharging currents than commercially available cells. It showed even greater improvement over commercial cells with a non-conventional cell design. Large capacity anodes for a zinc-air battery have also been made and have shown excellent material utilization at various discharge rates. The zinc-air battery was used to power an electric bicycle and demonstrated good results.

  11. Determination of 90Sr / 238U ratio by double isotope dilution inductively coupled plasma mass spectrometer with multiple collection in spent nuclear fuel samples with in situ 90Sr / 90Zr separation in a collision-reaction cell

    Science.gov (United States)

    Isnard, H.; Aubert, M.; Blanchet, P.; Brennetot, R.; Chartier, F.; Geertsen, V.; Manuguerra, F.

    2006-02-01

    Strontium-90 is one of the most important fission products generated in nuclear industry. In the research field concerning nuclear waste disposal in deep geological environment, it is necessary to quantify accurately and precisely its concentration (or the 90Sr / 238U atomic ratio) in irradiated fuels. To obtain accurate analysis of radioactive 90Sr, mass spectrometry associated with isotope dilution is the most appropriated method. But, in nuclear fuel samples the interference with 90Zr must be previously eliminated. An inductively coupled plasma mass spectrometer with multiple collection, equipped with an hexapole collision cell, has been used to eliminate the 90Sr / 90Zr interference by addition of oxygen in the collision cell as a reactant gas. Zr + ions are converted into ZrO +, whereas Sr + ions are not reactive. A mixed solution, prepared from a solution of enriched 84Sr and a solution of enriched 235U was then used to quantify the 90Sr / 238U ratio in spent fuel sample solutions using the double isotope dilution method. This paper shows the results, the reproducibility and the uncertainties that can be obtained with this method to quantify the 90Sr / 238U atomic ratio in an UOX (uranium oxide) and a MOX (mixed oxide) spent fuel samples using the collision cell of an inductively coupled plasma mass spectrometer with multiple collection to perform the 90Sr / 90Zr separation. A comparison with the results obtained by inductively coupled plasma mass spectrometer with multiple collection after a chemical separation of strontium from zirconium using a Sr spec resin (Eichrom) has been performed. Finally, to validate the analytical procedure developed, measurements of the same samples have been performed by thermal ionization mass spectrometry, used as an independent technique, after chemical separation of Sr.

  12. In Situ TEM Electrical Measurements

    DEFF Research Database (Denmark)

    Canepa, Silvia; Alam, Sardar Bilal; Ngo, Duc-The

    2016-01-01

    influence the sample by external stimuli, e.g. through electrical connections, the TEM becomes a powerful laboratory for performing quantitative real time in situ experiments. Such TEM setups enable the characterization of nanostructures and nanodevices under working conditions, thereby providing a deeper...

  13. In Situ Wetland Restoration Demonstration

    Science.gov (United States)

    2016-06-01

    applied to the soil (see Figure 5-3). iv. The benthic community was sampled for abundance, taxa richness, Biotic Index, functional feeding groups ...1 Figure 1-2 Freshwater Tidal Wetland...process (Chadwick, 2008). Figure 1-2 Freshwater Tidal Wetland ESTCP Project ER-200825 In Situ Wetland Restoration Demonstration ER-200825 Final

  14. In Situ Cardiovascular Tissue Engineering

    NARCIS (Netherlands)

    Talacua, H

    2016-01-01

    In this thesis, the feasibility of in situ TE for vascular and valvular purposes were tested with the use of different materials, and animal models. First, the feasibility of a decellularized biological scaffold (pSIS-ECM) as pulmonary heart valve prosthesis is examined in sheep (Chapter 2). Next,

  15. Case study of the gradient features of in situ concrete

    Directory of Open Access Journals (Sweden)

    Pengkun Hou

    2014-01-01

    Full Text Available The recognition of gradient features of the properties of in situ concrete is important for the interpretation/prediction of service life. In this work, the gradient features: water absorption, porosity, mineralogy, morphology and micromechanical properties were studied on two in situ road concretes (15 and 5 years old, respectively by weighing, MIP, XRD, IR, SEM/EDS and micro-indentation techniques. Results showed that a coarsening trend of the pores of the concrete leads to a gradual increase of liquid transport property from inside to outside. Although the carbonation of the exposed surface results in a compact microstructure of the paste, its combined action with calcium-leaching leads to a comparable porosity of different concrete layers. Moreover, the combining factors result in three morphological features, i.e. a porous and granular exposed-layer, a fibrous and porous subexposed-layer and a compact inner-layer. Micro-indentation test results showed that a hard layer that moves inward with aging exists due to the alterations of the mineralogy, the pore and the gel structure.

  16. Combined beta-galactosidase and immunogold/silver staining for immunohistochemistry and DNA in situ hybridization

    NARCIS (Netherlands)

    van den Brink, W.; van der Loos, C.; Volkers, H.; Lauwen, R.; van den Berg, F.; Houthoff, H. J.; Das, P. K.

    1990-01-01

    A combination of beta-galactosidase enzyme and the immunogold/silver staining method was studied for evaluation of double-staining experiments. Applications are shown for immunohistochemical double staining using two monoclonal antibodies and for combined immunohistochemistry and DNA in situ

  17. Prospectively randomized clinical trial to compare in situ and reversed saphenous vein grafts for femoropopliteal bypass.

    Science.gov (United States)

    Harris, P L; How, T V; Jones, D R

    1987-04-01

    Two hundred and fifteen femoropopliteal bypass procedures using autologous saphenous vein grafts were randomly allocated to either the reversed or in situ technique. Eleven veins (5 per cent) were rejected at operation on the basis of their small size, nine in the reversed group and two in the in situ group, and there were two (2 per cent) perioperative deaths in each group, leaving 102 reversed and 98 in situ grafts for further study. The cumulative patency at 3 years of the reversed grafts was 77 per cent and that of the in situ grafts was 68 per cent (n.s.). The patency of all grafts was affected adversely by small veins (P less than 0.005), long grafts (P less than 0.05), low volume of blood flow in the grafts (P less than 0.001) and poor run-off (P less than 0.05). These factors influenced the outcome of the in situ and reversed operations to a similar degree and there was no statistically significant difference between them within any subgroup. The mean compliance of the in situ grafts measured 3 months or more after operation with an ultrasonic echo-tracking system was 0.024 +/- 0.01 per cent/mmHg (+/- s.d.) compared with 0.017 +/- 0.01 per cent/mmHg for the reversed grafts (t = 2.43, P less than 0.02). The incidence of fibrous stricture formation as shown by intravenous digital subtraction angiography was 29 per cent in both the reversed and the in situ grafts. The results of the study to date indicate that reversed and in situ vein grafts are equally effective for femoropopliteal bypass.

  18. Fibrous dysplasia of the maxillary sinus: case report

    OpenAIRE

    Vijayalakshmi Subramaniam; Adarsha Tuluvinakoppa Vasudeva Herle

    2010-01-01

    Introduction and objective: Fibrous dysplasia is a non-neoplastic lesion of unknown origin with one-fourth involving head and neck. The aim of this paper is to report a case of fibrous dysplasia of the maxillary sinus, describing its clinical presentation, radiological features, histopathological appearance and surgical management. Case report: 3-year-old female patient who presented with a history of fullness of the right cheek and intraoral swelling was diagnosed to have fibrous dysplasia o...

  19. Postirradiation sarcoma (malignant fibrous histiocytoma) following cervix cancer

    International Nuclear Information System (INIS)

    Pinkston, J.A.; Sekine, Ichiro.

    1980-12-01

    A case of postirradiation sarcoma is described. The tumor, a malignant fibrous histiocytoma, occurred in the radiation field 11 years following postoperative external beam radiation therapy (7,000 rad) for carcinoma of the cervix. Reports of postirradiation malignant fibrous histiocytoma are rare, and the occurrence of this neoplasm following treatment for cervix cancer has not previously been described. The literature concerning postirradiation bone and soft tissue sarcomas is briefly reviewed, with special attention to malignant fibrous histiocytomas. (author)

  20. Fibrous osteodystrophy in two Northern Royal albatross chicks (Diomedea sanfordi).

    Science.gov (United States)

    Morgan, K J; Alley, M R; Gartrell, B D; Thompson, K G; Perriman, L

    2011-09-01

    In February 2004, two Northern Royal albatross chicks aged 20 and 25 days old were presented for necropsy. Both chicks had been hand-fed in situ at a breeding colony, from 2-3 days post-hatch. The hand-rearing diet consisted of boneless hoki fillets (Macraronus novaezelandiae), electrolytes, and sooty shearwater (Puffinus griseus) proventricular oil obtained as a by-product of cultural harvest. Routine necropsies on the affected chicks revealed many bones were soft and easily bent. Radiography and histopathology revealed decreased bone density, pathological fractures, and extensive remodelling suggestive of fibrous osteodystrophy. Nutritional secondary hyperparathyroidism, resulting from an imbalance in the dietary Ca:P ratio. The imbalance in the dietary Ca:P ratio was a result of feeding deboned and eviscerated fish. This investigation also highlighted potential health risks associated with the practice of feeding stored rancid proventricular oil, including the destruction of fat-soluble vitamins. It is therefore possible that oxidative degradation of vitamin D may have contributed to the development of nutritional secondary hyperparathyroidism. Subsequently, dietary recommendations for supplementary feeding of orphaned Northern Royal albatross chicks include the feeding of whole human-grade fish with an appropriate Ca:P ratio, and the exclusion of proventricular oil. These cases highlight the need for scientific input into wildlife conservation projects, as lack of appropriate nutritional advice resulted in the feeding of a nutritionally inadequate diet. Following the recommended changes in diet, no further cases of osteodystrophy have been diagnosed in hand-raised chicks in the albatross colony.

  1. Malignant solitary fibrous tumor metastatic to the orbit.

    Science.gov (United States)

    Glazer-Hockstein, Carolyn; Syed, Nasreen A; Warhol, Michael; Gausas, Roberta E

    2004-11-01

    A 61-year-old man with a history of malignant solitary fibrous tumor of the chest had development of unusual sites of metastasis involving the sphenoid wing of the orbit and soft tissues of the cheek. He was found to have a solitary fibrous tumor, an uncommon type of spindle cell neoplasm that most often arises in the pleura, which was metastatic to the orbit. This is the first reported case of malignant solitary fibrous tumor metastatic to the orbit. The clinical and histopathologic findings of metastatic malignant solitary fibrous tumor are described.

  2. Fibrous composites comprising carbon nanotubes and silica

    Science.gov (United States)

    Peng, Huisheng [Shanghai, CN; Zhu, Yuntian Theodore [Cary, NC; Peterson, Dean E [Los Alamos, NM; Jia, Quanxi [Los Alamos, NM

    2011-10-11

    Fibrous composite comprising a plurality of carbon nanotubes; and a silica-containing moiety having one of the structures: (SiO).sub.3Si--(CH.sub.2).sub.n--NR.sub.1R.sub.2) or (SiO).sub.3Si--(CH.sub.2).sub.n--NCO; where n is from 1 to 6, and R.sub.1 and R.sub.2 are each independently H, CH.sub.3, or C.sub.2H.sub.5.

  3. Polyolefin nanocomposites in situ polymerization

    International Nuclear Information System (INIS)

    Galland, Griselda Barrera; Fim, Fabiana de C.; Milani, Marceo A.; Silva, Silene P. da; Forest, Tadeu; Radaelli, Gislaine; Basso, Nara R.S.; Quijada, Raul

    2011-01-01

    Polyethylene and polypropylene nanocomposites using grapheme nanosheets and treated chrysotile have been synthesized by in situ polymerization using metallocene catalysts. The fillers have been submitted to acid, thermal and/ou ultrasound treatments before to introduce them into the polymerization reactor. A complete characterization of the fillers has been done. The nanocomposites have been characterized by SEM, TEM, DRX and AFM. The thermal, mechanic -dynamic, mechanical and electrical properties of the nanocomposites are discussed. (author)

  4. Oldest biliary endoprosthesis in situ.

    Science.gov (United States)

    Consolo, Pierluigi; Scalisi, Giuseppe; Crinò, Stefano F; Tortora, Andrea; Giacobbe, Giuseppa; Cintolo, Marcello; Familiari, Luigi; Pallio, Socrate

    2013-07-16

    The advantages of endoscopic retrograde cholangiopancreatography over open surgery have made it the predominant method of treating patients with choledocholithiasis. After sphincterotomy, however, 10%-15% of common bile duct stones cannot be removed with a basket or balloon. The methods for managing "irretrievable stones" include surgery, mechanical lithotripsy, intraductal or extracorporeal shock wave lithotripsy and biliary stenting. The case presented was a referred 82-year-old Caucasian woman with a 7-year-old plastic biliary endoprosthesis in situ. To the best of our knowledge the examined endoprosthesis is the oldest endoprosthesis in situ reported in the literature. Endoscopic biliary endoprosthesis placement remains a simple and safe procedure for patients with stones that are difficult to manage by conventional endoscopic methods and for patients who are unfit for surgery or who are high surgical risks. To date no consensus has been reached regarding how long a biliary prosthesis should remain in situ. Long-term biliary stenting may have a role in selected elderly patients if stones extraction has failed because the procedure may prevent stones impaction and cholangitis.

  5. Oldest biliary endoprosthesis in situ

    Science.gov (United States)

    Consolo, Pierluigi; Scalisi, Giuseppe; Crinò, Stefano F; Tortora, Andrea; Giacobbe, Giuseppa; Cintolo, Marcello; Familiari, Luigi; Pallio, Socrate

    2013-01-01

    The advantages of endoscopic retrograde cholangiopancreatography over open surgery have made it the predominant method of treating patients with choledocholithiasis. After sphincterotomy, however, 10%-15% of common bile duct stones cannot be removed with a basket or balloon. The methods for managing “irretrievable stones” include surgery, mechanical lithotripsy, intraductal or extracorporeal shock wave lithotripsy and biliary stenting. The case presented was a referred 82-year-old Caucasian woman with a 7-year-old plastic biliary endoprosthesis in situ. To the best of our knowledge the examined endoprosthesis is the oldest endoprosthesis in situ reported in the literature. Endoscopic biliary endoprosthesis placement remains a simple and safe procedure for patients with stones that are difficult to manage by conventional endoscopic methods and for patients who are unfit for surgery or who are high surgical risks. To date no consensus has been reached regarding how long a biliary prosthesis should remain in situ. Long-term biliary stenting may have a role in selected elderly patients if stones extraction has failed because the procedure may prevent stones impaction and cholangitis. PMID:23858381

  6. Unintended and in situ amorphisation of pharmaceuticals

    DEFF Research Database (Denmark)

    Priemel, P A; Grohganz, H; Rades, T

    2016-01-01

    by which in situ amorphisation occurs are often not fully understood. In situ amorphisation can be exploited and performed before administration of the drug or possibly even within the gastrointestinal tract, as can be inferred from in situ amorphisation observed during in vitro lipolysis. The use...... of in situ amorphisation can thus confer the advantages of the amorphous form, such as higher apparent solubility and faster dissolution rate, without the disadvantage of its physical instability....

  7. Imaging Findings of Fibrous Hamartoma of Infancy

    Energy Technology Data Exchange (ETDEWEB)

    Rho, Byung Hak; Lee, Hee Jung; Kwon, Sun Young [Dongsan Medical Center, Keimyung University College of Medicine, Daegu (Korea, Republic of)

    2009-09-15

    We wanted to evaluate the imaging findings of fibrous hamartoma of infancy (FHI). We retrospectively reviewed the clinical presentation and the sonographic (n = 5) and CT (n = 3) findings of 5 cases of surgically/pathologically confirmed FHI. The sonographic findings were evaluated according to the location, size, internal echogenicity and vascularity. The CT findings were evaluated according to the attenuation of the mass on both the pre- (n = 3) and postcontrast (n = 2) scans. The image findings were correlated with the pathologic findings. The mean age was 14.8 months (range, 7 months - 3 years). The location of lesions was all in the fatty layer of the back (n = 4) and upper arm (n = 1). All the lesions demonstrated-hypertrichosis on the overlying skin. The lesions measured 31.2 mm in the longest diameter (range: 18 mm - 50 mm). The sonographic findings were purely solid, heterogeneously hyperechoic and hypovacular for all the cases. The internal architecture revealed a 'layering' appearance (n = 3). The CT findings demonstrated isoattenuation, as compared to the adjacent muscle on both the pre- and postcontrast CT scans. The pathologic correlation demonstrated a characteristic 'organoid' mixture of fibrous, mucoid and fatty tissues in all cases. The diagnosis of FHI can be suggested by the sonographic findings of a superficially located, heterogeneous solid mass with a 'layering' appearance in the fatty layer of the back or arms of infants with local hypertrochosis on the overlying skin.

  8. Noise canceling in-situ detection

    Science.gov (United States)

    Walsh, David O.

    2014-08-26

    Technologies applicable to noise canceling in-situ NMR detection and imaging are disclosed. An example noise canceling in-situ NMR detection apparatus may comprise one or more of a static magnetic field generator, an alternating magnetic field generator, an in-situ NMR detection device, an auxiliary noise detection device, and a computer.

  9. Case report 525: Benign fibrous histiocytoma (BFH) of thumb

    International Nuclear Information System (INIS)

    Statz, E.M.; Philipps, E.; Pochebit, S.M.; Cooper, A.; Leslie, B.M.

    1989-01-01

    A case was presented of benign fibrous histiocytoma (BFH) involving the distal phalanx of the thumb, a location heretofore not described in the literature. The distinction between BFH and other lesions (e.g. non-ossifying fibroma) was considered in depth. The distinction between benign and malignant fibrous histiocytoma was also described. (orig.)

  10. Marfan syndrome with multiseptate pneumothorax and mandibular fibrous dysplasia

    Directory of Open Access Journals (Sweden)

    Kate A

    2009-01-01

    Full Text Available We describe a rare case of pneumothorax due to Marfan syndrome associated with fibrous dysplasia of the mandible. Marfan syndrome and fibrous dysplasia were possibly due to a common etiological factor. The association between the two and other tumors described in literature related to Marfan syndrome is discussed.

  11. Progressive failure analysis of fibrous composite materials and structures

    Science.gov (United States)

    Bahei-El-din, Yehia A.

    1990-01-01

    A brief description is given of the modifications implemented in the PAFAC finite element program for the simulation of progressive failure in fibrous composite materials and structures. Details of the memory allocation, input data, and the new subroutines are given. Also, built-in failure criteria for homogeneous and fibrous composite materials are described.

  12. Fibrous microcapsules and methods of assembly and use thereof

    Energy Technology Data Exchange (ETDEWEB)

    Stupp, Samuel; Rozkiewicz, Dorota

    2015-01-27

    The present invention relates to assembly of peptide amphiphiles and biopolymers into fibrous microcapsules, and uses thereof. In particular, the present invention provides devices, compositions, and methods for interfacial self-assembly of peptide amphiphiles and biopolyments into fibrous microcapsules, and uses thereof.

  13. Electrospun nanocomposite fibrous polymer electrolyte for secondary lithium battery applications

    International Nuclear Information System (INIS)

    Padmaraj, O.; Rao, B. Nageswara; Jena, Paramananda; Satyanarayana, N.; Venkateswarlu, M.

    2014-01-01

    Hybrid nanocomposite [poly(vinylidene fluoride -co- hexafluoropropylene) (PVdF-co-HFP)/magnesium aluminate (MgAl 2 O 4 )] fibrous polymer membranes were prepared by electrospinning method. The prepared pure and nanocomposite fibrous polymer electrolyte membranes were soaked into the liquid electrolyte 1M LiPF 6 in EC: DEC (1:1,v/v). XRD and SEM are used to study the structural and morphological studies of nanocomposite electrospun fibrous polymer membranes. The nanocomposite fibrous polymer electrolyte membrane with 5 wt.% of MgAl 2 O 4 exhibits high ionic conductivity of 2.80 × 10 −3 S/cm at room temperature. The charge-discharge capacity of Li/LiCoO 2 coin cells composed of the newly prepared nanocomposite [(16 wt.%) PVdF-co-HFP+(5 wt.%) MgAl 2 O 4 ] fibrous polymer electrolyte membrane was also studied and compared with commercial Celgard separator

  14. Imaging of soft tissue malignant fibrous histiocytoma

    International Nuclear Information System (INIS)

    Jemni, H.; Bakir, D.; Ben Ahmed, S.; Kraiem, C.; Mrad Dali, K.; Tlili-Graiess, K.; Mnif, Z.; Jeddi, M.

    1996-01-01

    Malignant fibrous histiocytoma (MFH) is a rare and potentially highly malignant sarcoma. The authors report 6 cases of MFH in various sites : two in the chest wall, one in the pelvis, two in the gluteal zones and one on the scalp. Ultrasonography and computed tomography were the main imaging methods used in the assessment of the structure and extension of the tumor. A poor prognosis was noted in four cases: death within a few months in the two thoracic sites, recurrence in the pelvic and scalp lesions, radical surgery allowed recovery in two cases. A review of the literature showed that MRI and CT are complementary in the initial staging and follow-up these patients. (author)

  15. A solitary fibrous tumor of the kidney

    Directory of Open Access Journals (Sweden)

    Anuruddha M Abeygunasekera

    2015-01-01

    Full Text Available A solitary fibrous tumor (SFT is an uncommon spindle cell neoplasm that usually occurs in the pleura, but may occur in extrapleural sites. Its occurrence in the kidney is rare. We report a SFT, clinically thought to be a renal cell carcinoma arising in the kidney of a 68-year-old female. The tumor was well-circumscribed and composed of a mixture of spindle cells and dense collagenous bands. Immunohistochemical studies revealed reactivity for CD34, CD99, and Bcl-2 protein, with no staining for keratin or muscle markers, confirming the diagnosis. The immunohistochemical study was the key to diagnosis. Several younger members of her family had colorectal and lung cancers suggesting the possibility of a familial or genetic susceptibility.

  16. Acoustical properties of highly porous fibrous materials

    Science.gov (United States)

    Lambert, R. F.

    1979-01-01

    Highly porous, fibrous bulk sound absorbing materials are studied with a view toward understanding their acoustical properties and performance in a wide variety of applications including liners of flow ducts. The basis and criteria for decoupling of acoustic waves in the pores of the frame and compressional waves in the frame structure are established. The equations of motion are recast in a form that elucidates the coupling mechanisms. The normal incidence surface impedance and absorption coefficient of two types of Kevlar 29 and an open celled foam material are studied. Experimental values and theoretical results are brought into agreement when the structure factor is selected to provide a fit to the experimental data. A parametric procedure for achieving that fit is established. Both a bulk material quality factor and a high frequency impedance level are required to characterize the real and imaginary part of the surface impedance and absorption coefficient. A derivation of the concepts of equivalent density and dynamic resistance is presented.

  17. Compressibility of air in fibrous materials

    DEFF Research Database (Denmark)

    Tarnow, Viggo

    1996-01-01

    The dynamic compressibility of air in fibrous materials has been computed for two assumed configurations of fibers which are close to the geometry of real fiber materials. Models with parallel cylinders placed in a regular square lattice and placed randomly are treated. For these models...... the compressibility is computed approximately from the diameter and mean distances between cylinders. This requires calculation of the air temperature, which is calculated for cylinders in a regular lattive by the Wigner-Seitz cell approximation. In the case of random placement, the calculation is done by a summation...... over thermal waves from all fibers, and by a self-consistent procedure. Figuren of the compressibility in the frequency range 10-100 000 Hz, are given for diameter of the cylinders of 6.8 µm, and mean distances between them from 50 to 110 µm, which corresponds to glass wool with a density of 40 to 16...

  18. Primary Malignant Fibrous Histiocytoma: A Rare Case

    Directory of Open Access Journals (Sweden)

    Anastasios Katsourakis

    2011-01-01

    Full Text Available Malignant fibrous histiocytoma (MFH of the small intestine is an extremely rare condition. It occurs most commonly in the extremities and the trunk. We report a case of a 67-year-old woman who admitted with fever, myalgia, and altered status. After thorough investigation, a tumor of the jejunum was found. The patient underwent complete surgical removal of the tumor. A diagnosis of MFN (undifferentiated high-grade pleomorphic sarcoma was made. The patient received adjuvant chemotherapy with Gemcitabine. Two years after the operation, the patient died due to recurrence of the disease. MFH of the small intestine is an extremely rare neoplasm with an aggressive biological behaviour. In this paper, pathogenesis, natural history, and treatment are reviewed.

  19. Four Models of In Situ Simulation

    DEFF Research Database (Denmark)

    Musaeus, Peter; Krogh, Kristian; Paltved, Charlotte

    2014-01-01

    Introduction In situ simulation is characterized by being situated in the clinical environment as opposed to the simulation laboratory. But in situ simulation bears a family resemblance to other types of on the job training. We explore a typology of in situ simulation and suggest that there are f...... to team intervention and philosophies informing what good situated learning research is. This study generates system knowledge that might inform scenario development for in situ simulation.......Introduction In situ simulation is characterized by being situated in the clinical environment as opposed to the simulation laboratory. But in situ simulation bears a family resemblance to other types of on the job training. We explore a typology of in situ simulation and suggest...... that there are four fruitful approaches to in situ simulation: (1) In situ simulation informed by reported critical incidents and adverse events from emergency departments (ED) in which team training is about to be conducted to write scenarios. (2) In situ simulation through ethnographic studies at the ED. (3) Using...

  20. In situ bypass og diabetes

    DEFF Research Database (Denmark)

    Jensen, Leif Panduro; Schroeder, T V; Lorentzen, J E

    1993-01-01

    decreased survival rate was found in diabetics (p treatment of critical ischaemia of the lower limb in diabetic patients. The overall results in diabetic patients, whether insulin-dependent or not, were equal to those in non-diabetic......From 1986 through to 1990 a total of 483 in situ bypass procedures were performed in 444 patients. Preoperative risk-factors were equally distributed among diabetic (DM) and non-diabetic (NDM) patients, except for smoking habits (DM:48%, NDM:64%, p = 0.002) and cardiac disease (DM:45%, NDM:29%, p...... = 0.005). Critical limb-ischaemia was more often present in diabetic than non-diabetic patients (DM:57%, NDM:36%, p = 0.0002). Diabetic patients had a significantly lower distal anastomosis than non-diabetic patients (p = 0.00001). There were no differences among diabetic and non-diabetic patients...

  1. In-situ measurement system

    Science.gov (United States)

    Lord, David E.

    1983-01-01

    A multipurpose in situ underground measurement system comprising a plurality of long electrical resistance elements in the form of rigid reinforcing bars, each having an open loop "hairpin" configuration of shorter length than the other resistance elements. The resistance elements are arranged in pairs in a unitized structure, and grouted in place in the underground volume. The electrical resistance of each element and the difference in electrical resistance of the paired elements are obtained, which difference values may be used in analytical methods involving resistance as a function of temperature. A scanner sequentially connects the resistance-measuring apparatus to each individual pair of elements. A source of heating current is also selectively connectable for heating the elements to an initial predetermined temperature prior to electrical resistance measurements when used as an anemometer.

  2. DOE In Situ Remediation Integrated Program

    International Nuclear Information System (INIS)

    Yow, J.L. Jr.

    1993-01-01

    The In Situ Remediation Integrated Program (ISRP) supports and manages a balanced portfolio of applied research and development activities in support of DOE environmental restoration and waste management needs. ISRP technologies are being developed in four areas: containment, chemical and physical treatment, in situ bioremediation, and in situ manipulation (including electrokinetics). the focus of containment is to provide mechanisms to stop contaminant migration through the subsurface. In situ bioremediation and chemical and physical treatment both aim to destroy or eliminate contaminants in groundwater and soils. In situ manipulation (ISM) provides mechanisms to access contaminants or introduce treatment agents into the soil, and includes other technologies necessary to support the implementation of ISR methods. Descriptions of each major program area are provided to set the technical context of the ISM subprogram. Typical ISM needs for major areas of in situ remediation research and development are identified

  3. Microstructure of cotton fibrous assemblies based on computed tomography

    Science.gov (United States)

    Jing, Hui; Yu, Weidong

    2017-12-01

    This paper describes for the first time the analysis of inner microstructure of cotton fibrous assemblies using computed tomography. Microstructure parameters such as packing density, fractal dimension as well as porosity including open porosity, closed porosity and total porosity are calculated based on 2D data from computed tomography. Values of packing density and fractal dimension are stable in random oriented fibrous assemblies, and there exists a satisfactory approximate linear relationship between them. Moreover, poles analysis indicates that porosity represents the tightness of fibrous assemblies and open poles are main existence.

  4. Solitary fibrous tumor of the orbit with intracranial involvement.

    Science.gov (United States)

    Young, Thomas K; Hardy, Thomas G

    2011-01-01

    Solitary fibrous tumor of the orbit is a rare neoplasm that often follows a benign course. Additional involvement beyond the orbit is even rarer, having only been reported in 2 cases previously. The authors describe a 62-year-old patient with a primarily intracranial lesion including orbital extension which was debulked and initially diagnosed as meningioma. Two recurrences 3 and 4 years later disclosed a solitary fibrous tumor, with the initial histopathology being revised to the same diagnosis. This rare presentation of an orbital solitary fibrous tumor highlights the surgical challenge faced when the tumor straddles the cranio-orbital junction and demonstrates the potential for rapid regrowth after incomplete excision.

  5. CT features of fibrous dysplasia of the temporal bone

    International Nuclear Information System (INIS)

    Charrada-Ben Farhat, L.; Bourkhis, S.; Ben Yaacoub, I.; Dali, N.; Askri, A.; Hendaoui, L.

    2006-01-01

    Fibrous dysplasia is characterized by a progressive replacement of normal bone elements by fibrous tissue. The temporal bone is rarely involved. In this location, complications such as facial deformity, conductive hearing loss and facial peripheral neural involvement can occur. Positive diagnosis can be established with computerized tomography which also enables assessment of extension and detection of complications. We report a case of a 27-year-old man with extensive fibrous dysplasia of the right temporal bone presenting with conductive hearing loss secondary to progressive stenosis of the external auditory canal. Computerized tomography of the temporal region was performed. (authors)

  6. A radiopaque electrospun scaffold for engineering fibrous musculoskeletal tissues: Scaffold characterization and in vivo applications.

    Science.gov (United States)

    Martin, John T; Milby, Andrew H; Ikuta, Kensuke; Poudel, Subash; Pfeifer, Christian G; Elliott, Dawn M; Smith, Harvey E; Mauck, Robert L

    2015-10-01

    strategies for the intervertebral disc, meniscus, tendon and ligament have progressed from in vitro to in vivo evaluation using a variety of animal models, and the clinical application of these technologies is imminent. The composition of most scaffold materials however does not allow for visualization by methods available to clinicians (e.g., radiography), and thus it is not possible to assess their performance in situ. In this work, we describe a radiopaque nanofibrous scaffold that can be visualized radiographically in both small and large animal models and serve as a framework for the development of an engineered fibrous tissue. Copyright © 2015 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

  7. In Situ Transmission Electron Microscopy for Electronics

    OpenAIRE

    Arita, Masashi; Hamada, Kouichi; Takahashi, Yasuo; Sueoka, Kazuhisa; Shibayama, Tamaki

    2015-01-01

    Electronic devices are strongly influenced by their microstructures. In situ transmission electron microscopy (in situ TEM) with capability to measure electrical properties is an effective method to dynamically correlate electric properties with microstructures. We have developed tools and in situ TEM experimental procedures for measuring electronic devices, including TEM sample holders and sample preparation methods. The method was used to study metallic nanowire by electromigration, magn...

  8. In Situ Hybridization Pada Kanker Payudara

    OpenAIRE

    Diah Witari, Ni Putu

    2014-01-01

    Kesulitan yang dijumpai pada penanganan kanker payudara adalah terjadinya kekambuhan atau relaps. Deteksi status HER2 pada pasien merupakan salah satu upaya untuk mendeteksi terjadinya relaps dan juga untuk menentukan jenis terapi yang ada diberikan. Ekspresi protein HER2 dapat dideteksi dengan immunohistochemistry (IHC), sedangkan mutasi gen HER2 dapat dideteksi dengan teknik in situ hybridization baik berupa fluorescence in situ hybridization (FISH) ataupun chromogenic in situ hy...

  9. Training for teamwork through in situ simulations

    Science.gov (United States)

    Sorensen, Asta; Poehlman, Jon; Bollenbacher, John; Riggan, Scott; Davis, Stan; Miller, Kristi; Ivester, Thomas; Kahwati, Leila

    2015-01-01

    In situ simulations allow healthcare teams to practice teamwork and communication as well as clinical management skills in a team's usual work setting with typically available resources and equipment. The purpose of this video is to demonstrate how to plan and conduct in situ simulation training sessions, with particular emphasis on how such training can be used to improve communication and teamwork. The video features an in situ simulation conducted at a labour and delivery unit in response to postpartum hemorrhage. PMID:26294962

  10. The SENSEI Generic In Situ Interface

    Energy Technology Data Exchange (ETDEWEB)

    Ayachit, Utkarsh [Kitware, Inc., Clifton Park, NY (United States); Whitlock, Brad [Intelligent Light, Rutherford, NJ (United States); Wolf, Matthew [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Loring, Burlen [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Geveci, Berk [Kitware, Inc., Clifton Park, NY (United States); Lonie, David [Kitware, Inc., Clifton Park, NY (United States); Bethel, E. Wes [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2017-04-11

    The SENSEI generic in situ interface is an API that promotes code portability and reusability. From the simulation view, a developer can instrument their code with the SENSEI API and then make make use of any number of in situ infrastructures. From the method view, a developer can write an in situ method using the SENSEI API, then expect it to run in any number of in situ infrastructures, or be invoked directly from a simulation code, with little or no modification. This paper presents the design principles underlying the SENSEI generic interface, along with some simplified coding examples.

  11. Fabrication and Cytocompatibility of In Situ Crosslinked Carbon Nanomaterial Films

    Science.gov (United States)

    Patel, Sunny C.; Lalwani, Gaurav; Grover, Kartikey; Qin, Yi-Xian; Sitharaman, Balaji

    2015-05-01

    Assembly of carbon nanomaterials into two-dimensional (2D) coatings and films that harness their unique physiochemical properties may lead to high impact energy capture/storage, sensors, and biomedical applications. For potential biomedical applications, the suitability of current techniques such as chemical vapor deposition, spray and dip coating, and vacuum filtration, employed to fabricate macroscopic 2D all carbon coatings or films still requires thorough examination. Each of these methods presents challenges with regards to scalability, suitability for a large variety of substrates, mechanical stability of coatings or films, or biocompatibility. Herein we report a coating process that allow for rapid, in situ chemical crosslinking of multi-walled carbon nanotubes (MWCNTs) into macroscopic all carbon coatings. The resultant coatings were found to be continuous, electrically conductive, significantly more robust, and cytocompatible to human adipose derived stem cells. The results lay groundwork for 3D layer-on-layer nanomaterial assemblies (including various forms of graphene) and also opens avenues to further explore the potential of MWCNT films as a novel class of nano-fibrous mats for tissue engineering and regenerative medicine.

  12. Decortication of fibrous dysplasia of the maxillary sinus.

    Science.gov (United States)

    Lee, Yoon Ho; Hwang, Kun

    2011-01-01

    We present 3 cases of fibrous dysplasia of the maxillary sinus that were treated by decortication through the anterior wall of the maxilla. The thickened anterior wall of the maxilla and the zygoma were contoured into normal shape with a bur, and a 2 × 2-cm window was made below the infraorbital foramen using a reciprocating saw. The removed piece of bone was 3 to 5 mm thick. All abnormal fibrous tissues in the maxillary sinus were extirpated by drilling through the window until the sinus cavity was clear. The preserved bone plate was restored in place to close the window of the maxillary anterior wall and fixed with miniplates. Three patients were treated by means of such internal decompression method. No overgrowth or disfigurement of the facial bone was appreciated 14 to 51 months postoperatively. We contend that internal decortication of fibrous dysplasia through a window in the anterior wall is effective to minimize external expansion of fibrous dysplasia.

  13. Ocular malignant fibrous histiocytoma: clinical and histopathological characteristics.

    OpenAIRE

    Krishnan, M M; Kawatra, V K; Ratnakar, C; Rao, V A; Veliath, A J

    1987-01-01

    A rare case of malignant fibrous histiocytoma involving the whole eye is reported in an Oriental 60-year-old man. Six months' follow-up after exenteration did not show any evidence of local recurrence or distant metastases.

  14. Ehlers-Danlos syndrome with monostotic fibrous dysplasia

    Directory of Open Access Journals (Sweden)

    Rao A

    1979-01-01

    Full Text Available An unusual case of Ehlers-Danlos syndrome with monostotic fibrous dysplasia of the humorus is presented. The other orthopae-dic manifestations, its complications and associated features are re-viewed and summarised.

  15. Fabrication of highly modulable fibrous 3D extracellular microenvironments

    KAUST Repository

    Zhang, Xixiang

    2017-06-13

    Three-dimensional (3D) in vitro scaffolds that mimic the irregular fibrous structures of in vivo extracellular matrix (ECM) are critical for many important biological applications. However, structural properties modulation of fibrous 3D scaffolds remains a challenge. Here, we report the first highly modulable 3D fibrous scaffolds self-assembled by high-aspect-ratio (HAR) microfibers. The scaffolds structural properties can be easily tailored to incorporate various physical cues, including geometry, stiffness, heterogeneity and nanotopography. Moreover, the fibrous scaffolds are readily and accurately patterned on desired locations of the substrate. Cell culture exhibits that our scaffolds can elicit strong bidirectional cell-material interactions. Furthermore, a functional disparity between the two-dimensional substrate and our 3D scaffolds is identified by cell spreading and proliferation data. These results prove the potential of the proposed scaffold as a biomimetic extracellular microenvironment for cell study.

  16. MRI of fibrous cortical defect and non-ossifying fibroma

    Energy Technology Data Exchange (ETDEWEB)

    Mishima, Yoshiko; Aoki, Takatoshi; Watanabe, Hideyuki; Nakata, Hajime; Hashimoto, Hiroshi; Nakamura, Toshitaka [Univ. of Occupational and Environmental Health, Kitakyushu, Fukuoka (Japan). School of Medicine

    1999-02-01

    Fibrous cortical defect and non-ossifying fibroma are the benign fibrous lesions of bone commonly involving children. Their diagnosis is usually done with radiography, and MR examinations are rarely performed. We evaluated MRI findings of 11 lesions in 10 cases of fibrous cortical defect and non-ossifying fibroma. Signal intensity of the lesions was varied and large lesions (2 cm<) tended to show heterogeneous signal intensity on both T1-weighted and T2-weighted images corresponding to a mixture of components including fibrous tissue, hemosiderin and foam cells. MRI helps to delineate the extent of the involved bone and to assess the various histological components of the lesions. However, their diagnosis is basically made on the radiographic findings and the role of MRI is limited. (author)

  17. Impregnated Fibrous Materials. Report of a Study Group on Impregnated Fibrous Materials

    International Nuclear Information System (INIS)

    1968-01-01

    There has recently been renewed interest in the use of radiation from radioisotopes or particle accelerators to initiate and sustain chemical reactions. Particular attention is being paid to the production of wood-plastic composites, a process which is now a commercial reality with radiation competing against chemical methods to enhance the properties of wood. It has been reported that water repellancy, hardness, weathering, insect and chemical resistance, compressive, bending and shear strength can be significantly improved by the process, but so far there has been a limited commercial outlet for the product. Papers on this subject were presented at the International Atomic Energy Agency's Symposium on Industrial Uses of Large Radiation Sources, Salzburg, May 1963, and since then the Agency has been aware of the interest of developing countries in conducting research on wood and other fibrous materials as a means of further exploiting natural resources. It was felt that some attempt should be made to co-ordinate, on a regional basis, the work being done in this field and at the same time review the world status, including the associated technology in such areas as monomer-polymer chemistry and impregnation techniques where they are directly related to this work. Because of the wide range of fibrous materials being studied there, Asia and the Far East was chosen as the most representative area and 39 participants from 13 countries, and from international organizations, met in Bangkok from 20 to 24 November 1967 to assess the potential of impregnated fibrous materials. This report is a record of the meeting and is based not only on work performed both inside and outside the region but also on details of the resources and industries in the area

  18. Giant solitary fibrous tumour of the liver

    Directory of Open Access Journals (Sweden)

    Eggermont Alexander MM

    2006-11-01

    Full Text Available Abstract Background Solitary fibrous tumour (SFT is an uncommon mesenchymal neoplasm that most frequently affects the pleura, although it has been reported with increasing frequency in various other sites such as in the peritoneum, pericardium and in non-serosal sites such as lung parenchyma, upper respiratory tract, orbit, thyroid, parotid gland, or thymus. Liver parenchyma is rarely affected. Clinically, SFTs cause symptoms after having reached a certain size or when vital structures are involved. In recent years, SFTs are more often identified and distinguished from other tumours with a similar appearance due to the availability of characteristic immunohistochemical markers. Case presentation In this manuscript we report the case of a large tumour of the liver, which was histologically diagnosed as a SFT, and showed involvement of a single hepatic segment. Because of the patient's presentation and clinical course, it may represent a radiation-induced lesion. Conclusion When a SFT has been diagnosed, surgery is the treatment of choice. The small number of patients with a SFT of the liver and its unknown natural behaviour creates the need to a careful registration and follow-up of all identified cases

  19. Craniofacial fibrous dysplasia surgery: a functional approach.

    Science.gov (United States)

    Béquignon, E; Cardinne, C; Lachiver, X; Wagner, I; Chabolle, F; Baujat, B

    2013-09-01

    Craniofacial fibrous dysplasia has not only esthetic but functional impact. Surgery is controversial, ranging from conservative to radical. It involves elevated hemorrhage risk, and should be progressive, based on an individual risk/benefit analysis with the aim of improving quality of life. Three patients (one male, two female; mean age, 35 years) with evolutive orbital-temporal maxillary dysplasia were treated between 2008 and 2009 in our department. All showed exophthalmia and nasal obstruction. In one patient, symptomatology was aggravated by a frontal sinus cyst within the dysplasia. Another had associated auditory canal obstruction inducing recurrent external otitis. Optic nerve decompression was achieved on a combined coronal and endonasal approach, assisted by neuronavigation. Complementary remodelling resection, dacryocystorhinostomy and internal optic nerve decompression were performed. Functional results showed 70 % improvement on a subjective scale for eye tension and nasal obstruction. Surgery was feasible in all patients, with no complications. Current surgical management allies esthetic and functional concerns. Remodeling resection is the reference technique. The coronal approach is a good primary option for optic nerve decompression. Endonasal surgery with neuronavigation improves nasal ventilation and lacrimal canal permeability. Copyright © 2012 Elsevier Masson SAS. All rights reserved.

  20. Treating Fibrous Insulation to Reduce Thermal Conductivity

    Science.gov (United States)

    Zinn, Alfred; Tarkanian, Ryan

    2009-01-01

    A chemical treatment reduces the convective and radiative contributions to the effective thermal conductivity of porous fibrous thermal-insulation tile. The net effect of the treatment is to coat the surfaces of fibers with a mixture of transition-metal oxides (TMOs) without filling the pores. The TMO coats reduce the cross-sectional areas available for convection while absorbing and scattering thermal radiation in the pores, thereby rendering the tile largely opaque to thermal radiation. The treatment involves a sol-gel process: A solution containing a mixture of transition-metal-oxide-precursor salts plus a gelling agent (e.g., tetraethylorthosilicate) is partially cured, then, before it visibly gels, is used to impregnate the tile. The solution in the tile is gelled, then dried, and then the tile is fired to convert the precursor salts to the desired mixed TMO phases. The amounts of the various TMOs ultimately incorporated into the tile can be tailored via the concentrations of salts in the solution, and the impregnation depth can be tailored via the viscosity of the solution and/or the volume of the solution relative to that of the tile. The amounts of the TMOs determine the absorption and scattering spectra.

  1. Ground-glass pattern fibrous dysplasia of frontal sinus.

    Science.gov (United States)

    Chourmouzi, D; Psoma, E; Drevelegas, A

    2013-01-01

    The case of a 5-year-old boy with ground-glass pattern craniofacial fibrous dysplasia (FD) presenting with progressive swelling in the right frontal region is reported. The imaging findings with computed tomography and magnetic resonance imaging (MRI) findings are presented. The differential diagnosis with inspissated mucocele is discussed as well. Fibrous tissue could be hypo dense on CT. Post-contrast enhancement of the lesion on MRI is the key for diagnosis.

  2. Computed tomographic features of fibrous dysplasia of maxillofacial region

    OpenAIRE

    Sontakke, Subodh Arun; Karjodkar, Freny R; Umarji, Hemant R

    2011-01-01

    Purpose This study was to find the computed tomographic features of fibrous dysplasia of the maxillofacial region. Materials and Methods All eight cases included in the study reported either to Government Dental College and Hospital or Nair Hospital Dental College, Mumbai between 2003 and 2009. The patients were prescribed computed tomogram in addition to conventional radiographs of maxillofacial region which were studied for characteristic features of fibrous dysplasia. The diagnosis of fibr...

  3. Chondrosarcoma occurring in a patient with polyostotic fibrous dysplasia

    Energy Technology Data Exchange (ETDEWEB)

    De Smet, A.A.; Travers, H.; Neff, J.R.

    1981-12-01

    A 36-year-old white man with polyostotic fibrous dysplasia was found to have a high-grade chondrosarcoma arising from the left ilium. Although a left hemipelvectomy was performed, the patient subsequently developed sacral and pulmonary metastases and succumbed to his disease. This patient represents the first documented example of an unequivocally high-grade chondrosarcoma arising in an area of fibrous dysplasia without prior irradiation.

  4. Fibrous epulis associated with impacted lower right third molar

    Directory of Open Access Journals (Sweden)

    Ni Putu Mira Sumarta

    2009-12-01

    Full Text Available Background: Epulis or epulides are lesions associated with gingival tissues. Fibrous epulis is a type of hyperplastic fibrous tissue mass located at the gingival which is slow growing, painless, having same color as the oral mucosa and firm on palpation. Anterior regions of the oral cavity are the frequently affected sites as these areas are more prone to be affected by calculus deposition and poor plaque control due to frequent teeth malposition. Removal of any irritating factors and excision of the lesion are the usual treatments. Purpose: This case report presents a rare case of fibrous epulis which occurred in the posterior region of the oral cavity and associated with impacted lower third molar. Case: A case of fibrous epulis at the lower right third molar area of three months duration is presented. The mass was slow growing, painless and on examination it was a pedunculated mass overlying the unerupted lower right third molar, having same color with the oral mucosa and firm on palpation. Clinically, the lesion was diagnosed as fibrous epulis associated with impacted lower right third molar. Case management: The treatment were surgical excision of the epulis and removal of the lower right third molar. The histopathology result showed tissue with squamous epithelial lining, achanthotic fibrous connective tissue, mononuclear inflammatory cells and few capillaries without signs of malignancy. This is consistent with the diagnosis of fibrous epulis. Conclusion: Fibrous epulis, although frequently occurred at the anterior region of the oral cavity, may rarely grow at the area of lower third molar. This phenomenon supports the theory that epulis can grow on any surface of oral mucous membrane as long as local irritants are present.

  5. Effects of compression on the sound absorption of fibrous

    DEFF Research Database (Denmark)

    Castagnede, Bernard; Akninen, Achour; Brouard, Achour

    2000-01-01

    During the compression of a fibrous mat, it is well known that the absorption properties are decreasing. In order to predict this change, some heuristic formulae are proposed which take into account the modifications of the physical parameters(porosity, resistivity, tortousity and shappe factors)......) which enter in the standard "equivalent fluid" model. Numerical predictions are then discussed and compared to experimental data obtained on a fibrous material(uncompressed and the compressed) used in automotive industry....

  6. Localized fibrous mesothelioma of the liver: a case report

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young Hwan; Lee, Moon Gyu; Weon, Young Cheol; Lee, Seung Gyu; Kim, Yoon Jeong; Lee, In Chul; Auh, Yong Ho [Asan Medical Center, University of Ulsan College of Medicine, Seoul (Korea, Republic of)

    1995-10-15

    Localized fibrous mesothelioma of the liver is very rare benign tumor. It usually manifest large palpable hepatic mass in right upper quadrant area, and the prognosis is excellent by surgical resection. Contrast enhanced CT scan shows well defined hyperattenuating mass and celiac angiogram shows hypervascular mass. Recently we experienced 1 case of localized fibrous mesothelioma of the liver, and we report CT and angiographic findings of this tumor.

  7. Angstrom analysis with dynamic in-situ aberration corrected electron microscopy

    International Nuclear Information System (INIS)

    Gai, P L; Boyes, E D

    2010-01-01

    Following the pioneering development of atomic resolution in-situ environmental TEM (ETEM) for direct probing of gas-solid reactions, recent developments are presented of dynamic real time in-situ studies at the Angstrom level in an aberration corrected electron microscope. The in-situ data from Pt-Pd nanoparticles on carbon with the corresponding FFT/optical diffractogram (OD) illustrate an achieved resolution of 0 C and higher, in a double aberration corrected JEOL 2200 FS TEM/STEM employing a wider gap objective pole piece and gas tolerant TMP column pumping system. Direct observations of dynamic biofuel catalysts under controlled calcinations conditions and quantified with catalytic reactivity and physico-chemical studies show the benefits in-situ aberration correction in unveiling the evolution of surface active sites necessary for the development efficient heterogeneous catalysts. The new results open up opportunities for dynamic studies of materials in an aberration corrected environment and direct future development activities.

  8. In situ precise electrospinning of medical glue fibers as nonsuture dural repair with high sealing capability and flexibility

    Science.gov (United States)

    Lv, Fu-Yan; Dong, Rui-Hua; Li, Zhao-Jian; Qin, Chong-Chong; Yan, Xu; He, Xiao-Xiao; Zhou, Yu; Yan, Shi-Ying; Long, Yun-Ze

    2016-01-01

    Purpose In this work, we propose an in situ precise electrospinning of medical glue fibers onto dural wound for improving sealing capability, avoiding tissue adhesion, and saving time in dural repair. Methods N-octyl-2-cyanoacrylate, a commercial tissue adhesive (medical glue), can be electrospun into ultrathin fibrous film with precise and homogeneous deposition by a gas-assisted electrospinning device. Results The self-assembled N-octyl-2-cyanoacrylate film shows high compactness and flexibility owing to its fibrous structure. Simulation experiments on egg membranes and goat meninges demonstrated that this technology can repair small membrane defects quickly and efficiently. Conclusion This method may have potential application in dural repair, for example, working as an effective supplementary technique for conventional dura suture. PMID:27621616

  9. [Fronto-ethmoidal fibrous dysplasia: a case-report].

    Science.gov (United States)

    Hoareau-Gruchet, F; Nils, M; Spinato, L; Rabeyrin, M; Righini, C A

    2012-01-01

    Fibrous dysplasia is a congenital bone disease, where normal bone is replaced by a fibrous-like tissue with immature osteogenesis. The cephalic extremity is affected in one out of three cases. The aim of this study was to describe a case of fibrous dysplasia and review workup and management of this pathology. We reviewed relevant publications using the Medline database and presented a case of isolated paranasal sinus fibrous dysplasia to illustrate this disease. The clinical onset was headache and left palpebral oedema in a twelve-year old. Imaging showed a left fronto-ethmoidal bone lesion with epidural empyema. No other radiological anomaly or phosphor-calcic disorder was present. The clinical course was positive using intravenous antibiotics, with a two-year follow-up. Fibrous dysplasia is diagnosed using CT-scan, without the need for histologic confirmation in most cases. Initial workup includes axial skeleton X-rays and hormonal dosages. The efficiency of biphosphonates drugs has significally reduced the number of surgical procedures. Fibrous dysplasia is often a multifocal disease and should be treated medically first. Management requires a multi-disciplinary team.

  10. Technology assessment of in situ uranium mining

    International Nuclear Information System (INIS)

    Cowan, C.E.

    1981-01-01

    The objective of the PNL portion of the Technology Assessment project is to provide a description of the current in situ uranium mining technology; to evaluate, based on available data, the environmental impacts and, in a limited fashion, the health effects; and to explore the impediments to development and deployment of the in situ uranium mining technology

  11. PRINS and in situ PCR protocols

    National Research Council Canada - National Science Library

    Gosden, John R

    1997-01-01

    ... mapping of DNA sequences on chromosomes and location of gene expression followed the invention and refinement of in situ hybridization. Among the most recent technical developments has been the use of oligonucleotide primers to detect and amplify or extend complementary sequences in situ, and it is to this novel field that PRINS and In S...

  12. In situ vitrification: A review

    International Nuclear Information System (INIS)

    Cole, L.L.; Fields, D.E.

    1989-11-01

    The in situ vitrification process (ISV) converts contaminated soils and sludges to a glass and crystalline product. The process appears to be ideally suited for on site treatment of both wet and dry wastes. Basically, the system requires four molybdenum electrodes, an electrical power system for vitrifying the soil, a hood to trap gaseous effluents, an off-gas treatment system, an off-gas cooling system, and a process control station. Mounted in three transportable trailers, the ISV process can be moved from site to site. The process has the potential for treating contaminated soils at most 13 m deep. The ISV project has won a number of outstanding achievement awards. The process has also been patented with exclusive worldwide rights being granted to Battelle Memorial Institute for nonradioactive applications. While federal applications still belong to the Department of Energy, Battelle transferred the rights of ISV for non-federal government, chemical hazardous wastes to a separate corporation in 1989 called Geosafe. This report gives a review of the process including current operational behavior and applications

  13. In situ bioremediation in Europe

    Energy Technology Data Exchange (ETDEWEB)

    Porta, A. [Battelle Europe, Geneva (CH); Young, J.K.; Molton, P.M. [Pacific Northwest Lab., Richland, WA (US)

    1993-06-01

    Site remediation activity in Europe is increasing, even if not at the forced pace of the US. Although there is a better understanding of the benefits of bioremediation than of other approaches, especially about in situ bioremediation of contaminated soils, relatively few projects have been carried out full-scale in Europe or in the US. Some engineering companies and large industrial companies in Europe are investigating bioremediation and biotreatment technologies, in some cases to solve their internal waste problems. Technologies related to the application of microorganisms to the soil, release of nutrients into the soil, and enhancement of microbial decontamination are being tested through various additives such as surfactants, ion exchange resins, limestone, or dolomite. New equipment has been developed for crushing and mixing or injecting and sparging the microorganisms, as have new reactor technologies (e.g., rotating aerator reactors, biometal sludge reactors, and special mobile containers for simultaneous storage, transportation, and biodegradation of contaminated soil). Some work has also been done with immobilized enzymes to support and restore enzymatic activities related to partial or total xenobiotic decontamination. Finally, some major programs funded by public and private institutions confirm that increasing numbers of firms have a working interest in bioremediation.

  14. Environmental TEM in the in situ Toolbox

    DEFF Research Database (Denmark)

    Wagner, Jakob Birkedal

    Studies of materials using in situ techniques usually involve a compromise of the in situ conditions in order to fulfil the requirements compatible with the instrumentation for characterization. These requirements include sample geometry, temperature, gas environment etc. Environmental TEM depends...... transfer holders have been used to transfer catalyst samples between reactor set-ups and TEM at room temperature in inert atmosphere [3]. To take the full advantage of the complementary in situ techniques transfer under reactions conditions is essential. Here we introduce the in situ transfer concept...... by use of a dedicated TEM transfer holder that is able to enclose the sample in a gaseous environment at temperatures up to approx. 900°C. The holder is compatible with other in situ technique set-ups. Another route for using complementary techniques without compromising the sample conditions is bringing...

  15. In situ/non-contact superfluid density measurement apparatus

    Science.gov (United States)

    Nam, Hyoungdo; Su, Ping-Hsang; Shih, Chih-Kang

    2018-04-01

    We present a double-coil apparatus designed to operate with in situ capability, which is strongly desired for superconductivity studies on recently discovered two-dimensional superconductors. Coupled with a scanning tunneling microscope, the study of both local and global superconductivity [for superconducting gap and superfluid density (SFD), respectively] is possible on an identical sample without sample degradations due to damage, contamination, or oxidation in an atmosphere. The performance of the double-coil apparatus was tested on atomically clean surfaces of non-superconducting Si(111)-7 × 7 and on superconducting films of 100 nm-thick Pb and 1.4 nm-ultrathin Pb. The results clearly show the normal-to-superconductor phase transition for Pb films with a strong SFD.

  16. Tensile behavior of orthorhombic alpha ''-titanium alloy studied by in situ X-ray diffraction

    DEFF Research Database (Denmark)

    Wang, X.D.; Lou, H.B.; Ståhl, Kenny

    2010-01-01

    The tensile behavior of a Ti-11%Zr-14%Nb-10%Sn alloy with pure orthorhombic alpha '' phase was studied by in situ X-ray diffraction using synchrotron radiation. It is found that no phase transformation happens during the whole tensile process. The "double-yielding" platforms of this alloy...

  17. A call to expand regulation to all carcinogenic fibrous minerals

    Science.gov (United States)

    Baumann, F.; Steele, I.; Ambrosi, J.; Carbone, M.

    2013-05-01

    The regulatory term "asbestos" groups only the six fibrous minerals that were commercially used among approximately 400. The carcinogenicity of these six regulated minerals has been largely demonstrated and is related to fiber structure, fiber length/diameter ratio, and bio-persistence. From a public perception, the generic term "asbestos" refers to the fibrous minerals that cause asbestosis, mesothelioma and other cancers. However, other non-regulated fibrous minerals are potentially as dangerous as the regulatory asbestos because they share similar physical and chemical properties, epidemiological studies have demonstrated their relationship with asbestos-related diseases, and both in vitro and in vivo experiments have established the toxicity of these minerals. For example, the non-regulated asbestiform winchite and richterite minerals that contaminated the vermiculite mined from Libby, Montana, (USA) were associated with mesothelioma, lung cancer and asbestosis observed among the area's residents and miners. Many other examples of non-regulated carcinogenic fibrous minerals include, but are not limited to, antigorite, arfvedsonite, balangeroite, carlosturanite, erionite, fluoro-edenite, hornblende, mordenite, palygorskite, and sepiolite. To propose a regulatory definition that would provide protection from all carcinogenic fibers, we have conducted an interdisciplinary literature review to compare the characteristics of "asbestos" and of non-regulated mineral fibers that relate to carcinogenicity. We specifically studied two non-regulated fibrous minerals that are associated with asbestos-related diseases: the serpentine antigorite and the zeolite erionite. Both examples underscore the problem of regulation based on commercial, rather than scientific principles: 1) the occurrence of fibrous antigorite in materials used to pave roads has been correlated with high mesothelioma rates in New Caledonia. Antigorite was also the cause of asbestosis in Poland, and in

  18. TERT promoter mutations and prognosis in solitary fibrous tumor.

    Science.gov (United States)

    Bahrami, Armita; Lee, Seungjae; Schaefer, Inga-Marie; Boland, Jennifer M; Patton, Kurt T; Pounds, Stanley; Fletcher, Christopher D

    2016-12-01

    Solitary fibrous tumor is a mesenchymal neoplasm exhibiting a broad spectrum of biological behavior and harboring the NAB2-STAT6 fusion. Clinicopathologic parameters are currently used in risk-prediction models for solitary fibrous tumor, but the molecular determinants of malignancy in solitary fibrous tumors remain unknown. We proposed that the activation of telomere maintenance pathways confers a perpetual malignant phenotype to these tumors. Therefore, we investigated telomerase reverse transcriptase (TERT) reactivation induced by promoter mutations as a potential molecular mechanism for aggressive clinical behavior in solitary fibrous tumor. The retrospective study included tumor samples from 94 patients with solitary fibrous tumor (31 thoracic and 63 extra-thoracic). Follow-up information was available for 68 patients (median, 46 months). TERT promoter mutation analysis was performed by PCR and Sanger sequencing, and TERT mRNA expression was assessed by real-time quantitative reverse transcription PCR. Patients were stratified into clinicopathologic subgroups (high-risk (n=20), moderate-risk (n=28), and low-risk (n=46)) according to the risk-stratification model proposed by Demicco et al. TERT promoter mutations were identified in 26 of 94 (28%) solitary fibrous tumors: -124C>T in 23 tumors (88%), -124C>A in 1 tumor (4%), and -146C>T in 2 tumors (8%). Real-time quantitative reverse transcription PCR revealed that TERT mRNA expression was higher in all solitary fibrous tumors with the mutant TERT promoter than those with the wild-type TERT promoter. TERT promoter mutations were strongly associated with high-risk clinicopathologic characteristics and outcome. An adverse event (relapse, death) occurred in 16 of 68 (24%) patients, 12 with solitary fibrous tumors with TERT promoter mutations and 4 with the wild-type TERT promoter. TERT promoter mutations were strongly associated with older age (P=0.006), larger tumor size (P=0.000002), higher risk classifications

  19. Imaging features of intracranial solitary fibrous tumors

    International Nuclear Information System (INIS)

    Yu Shuilian; Man Yuping; Ma Longbai; Liu Ying; Wei Qiang; Zhu Youkai

    2012-01-01

    Objective: To summarize the imaging features of intracranial solitary fibrous tumors (ISFT). Methods: Ten patients with ISFT proven histopathologically were collected. Four cases had CT data and all cases had MR data. The imaging features and pathological results were retrospectively analyzed. Results: All cases were misdiagnosed as meningioma at pre-operation. All lesions arose from intracranial meninges including 5 lesions above the tentorium, 4 lesions beneath the tentorium and 1 lesion growing around the tentorium. The margins of all the masses were well defined, and 8 lesions presented multilobular shape. CT demonstrated hyerattenuated masses in all 4 lesions, smooth erosion of the basicranial skull in 1 lesion, and punctiform calcification of the capsule in 1 lesion. T 1 WI showed most lesions with isointense or slight hyperintense signals including homogeneous in 4 lesions and heterogeneous in 6 lesions. T 2 WI demonstrated isointense or slight hyperintense in 2 lesions, mixed hypointense and hyperintense signals in 4, cystic portion in 2, and two distinct portion of hyperintense and hypointense signal, so called 'yin-yang' pattern, in 2. Strong enhanced was found in all lesions, especially in 8 lesion with heterogeneous with the low T 2 signal. 'Dural tail' was found in 4 lesions. Conclusions: ISFI has some specific CT and MR features including heterogeneous signal intensity on T 2 WI, strong enhancement of areas with low T 2 signal intensity, slight or no 'dural tail', without skull thickening, and the typical 'yin-yang' pattern. (authors)

  20. Reactive protoplasmic and fibrous astrocytes contain high levels of calpain-cleaved alpha 2 spectrin.

    Science.gov (United States)

    Kim, Jung H; Kwon, Soojung J; Stankewich, Michael C; Huh, Gi-Yeong; Glantz, Susan B; Morrow, Jon S

    2016-02-01

    Calpain, a family of calcium-dependent neutral proteases, plays important roles in neurophysiology and pathology through the proteolytic modification of cytoskeletal proteins, receptors and kinases. Alpha 2 spectrin (αII spectrin) is a major substrate for this protease family, and the presence of the αII spectrin breakdown product (αΙΙ spectrin BDP) in a cell is evidence of calpain activity triggered by enhanced intracytoplasmic Ca(2+) concentrations. Astrocytes, the most dynamic CNS cells, respond to micro-environmental changes or noxious stimuli by elevating intracytoplasmic Ca(2+) concentration to become activated. As one measure of whether calpains are involved with reactive glial transformation, we examined paraffin sections of the human cerebral cortex and white matter by immunohistochemistry with an antibody specific for the calpain-mediated αΙΙ spectrin BDP. We also performed conventional double immunohistochemistry as well as immunofluorescent studies utilizing antibodies against αΙΙ spectrin BDP as well as glial fibrillary acidic protein (GFAP). We found strong immunopositivity in selected protoplasmic and fibrous astrocytes, and in transitional forms that raise the possibility of some of fibrous astrocytes emerging from protoplasmic astrocytes. Immunoreactive astrocytes were numerous in brain sections from cases with severe cardiac and/or respiratory diseases in the current study as opposed to our previous study of cases without significant clinical conditions that failed to reveal such remarkable immunohistochemical alterations. Our study suggests that astrocytes become αΙΙ spectrin BDP immunopositive in various stages of activation, and that spectrin cleavage product persists even in fully reactive astrocytes. Immunohistochemistry for αΙΙ spectrin BDP thus marks reactive astrocytes, and highlights the likelihood that calpains and their proteolytic processing of spectrin participate in the morphologic and physiologic transition from

  1. Electrospinning of multicomponent ultrathin fibrous nonwovens for semi-occlusive wound dressings.

    Science.gov (United States)

    Hong, Youliang; Li, Yanan; Zhuang, Xiuli; Chen, Xuesi; Jing, Xiabin

    2009-05-01

    This work describes the design and assembly of multifunctional and cost-efficient composite fiber nonwovens as semi-occlusive wound dressings using a simple electrospinning process to incorporate a variety of functional components into an ultrathin fiber. These components include non-hydrophilic poly(L-lactide) (PLLA) as fibrous backbone, hydrophilic poly(vinyl pyrrolidone)-iodine (PVP-I), TiO(2) nanoparticles, zinc chloride as antimicrobial, odor-controlling, and antiphlogistic agents, respectively. The process of synthesis starts with a multicomponent solution of PLLA, PVP, TiO(2) nanoparticles plus zinc chloride, in which TiO(2) nanoparticles are synthesized by in situ hydrolysis of TiO(2) precursors in a PVP solution for the sake of obtaining the particle-uniformly dispersive solution. Subsequent electrospinning generates the corresponding composite fibers. A further iodine vapor treatment to the composite fibers combines iodine with PVP to produce the PVP-I complexes. Experiments indicate that the assembled composite fibers (300-400 nm) possess the ointment-releasing characteristic and the phase-separate, core-sheath structures in which PVP-I residing in fiber surface layer becomes the sheath, and PLLA distributing inside the fiber acts as the core. Based on this design, the structural advantages combining active components endow the assembled composite nonwovens with a variety of functions, especially, the existence of PVP-I, endows the nonwoven with water absorbability, antimicrobial activity, adhesive ability, and transformable characteristic from hydrophilicity to non-hydrophilicity. The multifunctional, cost-efficient, and ointment-releasing characteristics make the multicomponent composite fibrous nonwovens potentially useful in applications such as initial stage of dressing of the cankerous or contaminated wounds.

  2. Oxidative stress inhibition and oxidant activity by fibrous clays.

    Science.gov (United States)

    Cervini-Silva, Javiera; Nieto-Camacho, Antonio; Gómez-Vidales, Virginia

    2015-09-01

    Fibrous clays (sepiolite, palygorskite) are produced at 1.2m tonnes per year and have a wide range of industrial applications needing to replace long-fibre length asbestos. However, information on the beneficial effects of fibrous clays on health remains scarce. This paper reports on the effect of sepiolite (Vallecas, Spain) and palygorskite (Torrejón El Rubio, Spain) on cell damage via oxidative stress (determined as the progress of lipid peroxidation, LP). The extent of LP was assessed using the Thiobarbituric Acid Reactive Substances assay. The oxidant activity by fibrous clays was quantified using Electron-Paramagnetic Resonance. Sepiolite and palygorskite inhibited LP, whereby corresponding IC50 values were 6557±1024 and 4250±289μgmL(-1). As evidenced by dose-response experiments LP inhibition by palygorskite was surface-controlled. Fibrous clay surfaces did not stabilize HO species, except for suspensions containing 5000μgmL(-1). A strong oxidant (or weak anti-oxidant) activity favours the inhibition of LP by fibrous clays. Copyright © 2015 Elsevier B.V. All rights reserved.

  3. Computed tomographic features of fibrous dysplasia of maxillofacial region.

    Science.gov (United States)

    Sontakke, Subodh Arun; Karjodkar, Freny R; Umarji, Hemant R

    2011-03-01

    This study was to find the computed tomographic features of fibrous dysplasia of the maxillofacial region. All eight cases included in the study reported either to Government Dental College and Hospital or Nair Hospital Dental College, Mumbai between 2003 and 2009. The patients were prescribed computed tomogram in addition to conventional radiographs of maxillofacial region which were studied for characteristic features of fibrous dysplasia. The diagnosis of fibrous dysplasia was confirmed by histopathological report. All cases showed the ill-defined margins of lesions except in the region where the lesions were extending to cortex of the involved bone. Internal structure of all cases showed ground glass appearance. Four cases of maxillary lesion showed the displacement of maxillary sinus maintaining the shape of maxillary sinus. Two cases showed complete obliteration of maxillary sinus. Displacement of inferior alveolar canal did not follow any typical pattern in any of the cases but was displaced in different directions. The craniofacial type of fibrous dysplasia is as common as fibrous dysplasia of jaw. The margins, extent, internal structure and effect on surrounding structure are well detected on computed tomographic images.

  4. Isolated orbital fibrous dysplasia associated with ipsilateral keratoconus.

    Science.gov (United States)

    Liarakos, Vasilios S; Ilari, Luca; Chalvatzis, Nikolaos; Papaparaskeva, Kleio; Mavrikakis, Ioannis

    2010-06-01

    Fibrous dysplasia is a primary orbital bone tumor, described as a benign disorder in which proliferation of fibrous tissue and osteoid replaces and distorts the bone from which it derives. Unilateral keratoconus is a rare entity. Herein, we report a case of an extensive ethmoidal fibrous dysplasia associated with ipsilateral keratoconus, and review the literature on the subject. A 22-year-old man presented with left painless proptosis evolving over 10 years. There was associated ipsilateral epiphora and gradual visual loss. On examination his visual acuity was 20/20 OD and CF OS. His left globe was displaced lateraly 12 mm, with 9 mm of proptosis. The extraocular movements were normal. Left nasolacrimal duct obstruction was noted. Clinical signs of keratoconus were present only in the left cornea. High resolution corneal topography confirmed unilateral keratoconus and a CT scan showed an ovoid mass with a well defined sclerotic margin arising from the left ethmoid sinus and invading the orbit. The patient underwent resection of the lesion via a modified Lynch incision. Complete regression of proptosis was observed immediately after surgery. Histopathological examination revealed irregular trabeculae of woven bone in different levels of maturation in a moderately cellular fibrous matrix without nuclear atypia. Trabeculae were without osteoblastic rimming or osteoclastic resorption. There has been no recurrence over a 2-year follow-up period. To our knowledge, the coexistence of unilateral isolated craniofacial fibrous dysplasia with ipsilateral keratoconus has not been reported so far.

  5. Computed tomographic features of fibrous dysplasia of maxillofacial region

    International Nuclear Information System (INIS)

    Sontakke, Subodh Arun; Karjodka, Freny R; Umarji, Hemant R

    2011-01-01

    This study was to find the computed tomographic features of fibrous dysplasia of the maxillofacial region. All eight cases included in the study reported either to Government Dental College and Hospital or Nair Hospital Dental College, Mumbai between 2003 and 2009. The patients were prescribed computed tomogram in addition to conventional radiographs of maxillofacial region which were studied for characteristic features of fibrous dysplasia. The diagnosis of fibrous dysplasia was confirmed by histopathological report. All cases showed the ill-defined margins of lesions except in the region where the lesions were extending to cortex of the involved bone. Internal structure of all cases showed ground glass appearance. Four cases of maxillary lesion showed the displacement of maxillary sinus maintaining the shape of maxillary sinus. Two cases showed complete obliteration of maxillary sinus. Displacement of inferior alveolar canal did not follow any typical pattern in any of the cases but was displaced in different directions. The craniofacial type of fibrous dysplasia is as common as fibrous dysplasia of jaw. The margins, extent, internal structure and effect on surrounding structure are well detected on computed tomographic images.

  6. Computed tomographic features of fibrous dysplasia of maxillofacial region

    Energy Technology Data Exchange (ETDEWEB)

    Sontakke, Subodh Arun; Karjodka, Freny R [Nair Hospital Dental College, Mumba (India); Umarji, Hemant R [Government Dental College and Hospital, Mumbai (India)

    2011-03-15

    This study was to find the computed tomographic features of fibrous dysplasia of the maxillofacial region. All eight cases included in the study reported either to Government Dental College and Hospital or Nair Hospital Dental College, Mumbai between 2003 and 2009. The patients were prescribed computed tomogram in addition to conventional radiographs of maxillofacial region which were studied for characteristic features of fibrous dysplasia. The diagnosis of fibrous dysplasia was confirmed by histopathological report. All cases showed the ill-defined margins of lesions except in the region where the lesions were extending to cortex of the involved bone. Internal structure of all cases showed ground glass appearance. Four cases of maxillary lesion showed the displacement of maxillary sinus maintaining the shape of maxillary sinus. Two cases showed complete obliteration of maxillary sinus. Displacement of inferior alveolar canal did not follow any typical pattern in any of the cases but was displaced in different directions. The craniofacial type of fibrous dysplasia is as common as fibrous dysplasia of jaw. The margins, extent, internal structure and effect on surrounding structure are well detected on computed tomographic images.

  7. Craniofacial fibrous dysplasia - A review of current management techniques

    Directory of Open Access Journals (Sweden)

    Yadavalli Guruprasad

    2012-01-01

    Full Text Available Fibrous dysplasia is a pathologic condition of bone of unknown etiology with no apparent familial, hereditary or congenital basis. Lichtenstein first coined the term in 1938 and in 1942 he and Jaffe separated it from other fibro-osseous lesions. It is a bone tumor that, although benign, has the potential to cause significant cosmetic and functional disturbance, particularly in the craniofacial skeleton. Its management poses significant challenges to the surgeon. Craniofacial fibrous dysplasia is 1 of 3 types of fibrous dysplasia that can affect the bones of the craniofacial complex, including the mandible and maxilla. Fibrous dysplasia is a skeletal developmental disorder of the bone-forming mesenchyme that manifests as a defect in osteoblastic differentiation and maturation. It is a lesion of unknown etiology, uncertain pathogenesis, and diverse histopathology. Fibrous dysplasia represents about 2, 5% of all bone tumors and over 7% of all benign tumours. Over the years, we have gained a better understanding of its etiology, clinical behavior, and both surgical and non-surgical treatments.

  8. In Situ Aerosol Detector, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — NASA is developing new platform systems that have the potential to benefit Earth science research activities, which include in situ instruments for atmospheric...

  9. Development of an in situ fatigue sensor.

    Science.gov (United States)

    2011-01-01

    A prototype in situ fatigue sensor has been designed, constructed and evaluated experimentally for its ability to monitor the accumulation of fatigue damage in a cyclically loaded steel structure, e.g., highway bridge. The sensor consists of multiple...

  10. In-situ characterization of heterogeneous catalysts

    CERN Document Server

    Rodriguez, Jose A; Chupas, Peter J

    2013-01-01

    Helps researchers develop new catalysts for sustainable fuel and chemical production Reviewing the latest developments in the field, this book explores the in-situ characterization of heterogeneous catalysts, enabling readers to take full advantage of the sophisticated techniques used to study heterogeneous catalysts and reaction mechanisms. In using these techniques, readers can learn to improve the selectivity and the performance of catalysts and how to prepare catalysts as efficiently as possible, with minimum waste. In-situ Characterization of Heterogeneous Catalysts feat

  11. In situ texture analysis under applied load

    International Nuclear Information System (INIS)

    Brokmeier, H.G.

    2005-01-01

    The in-situ measurement of a crystallographic texture is a special type of a non-destructive measurement, which need special equipments. Due to the high photon flux and the excellent brilliance high energetic synchrotron radiations are a fantastic tool particular in fast experimentation. Moreover, a high penetration power allows the investigation of standard tensile sample of the DIN-norm. A loading device with a power up to 20 kN was installed at the hard wiggler beamline BW5 (HASYLAB-DESY) to perform in-situ strain and in-situ texture analysis. Using 100keV X-rays one gets short wavelength so that a 2D image-plate detector offers a wide range of diffraction pattern within the first 10 degree in 2 theta. Thermal neutron is another radiation with a high penetration power, which is the standard method for global texture analysis of bulk samples. As an example rectangular extruded Mg- Az31 was investigated by an in-situ. tensile experiment. Samples with 0 degree, 45 degree and 90 degree to the extrusion direction were cut. In-situ strain studies show the lattice dependent strains perpendicular and parallel to the loading direction. Moreover, in hexagonal Mg-Az31 a strong influence of the initial texture on the tensile behavior can be explained by the combination of texture simulation with in-situ measurements. (author)

  12. Fibrous dysplasia and ossifying fibroma of the paranasal sinuses.

    Science.gov (United States)

    Commins, D J; Tolley, N S; Milford, C A

    1998-10-01

    Fibro-osseous lesions involving the paranasal sinuses, the mid-face and anterior skull base are uncommon. In addition, there appears to be no clear pathological or clinical classification that embraces the variety of lesions that exhibit such diverse pathological and clinical behaviour, yet may still be referred to as a fibro-osseous lesion. The diagnosis of fibrous dysplasia and ossifying fibroma is made on a combination of clinical, radiological and pathological criteria. This paper emphasizes the clinical and pathological differences between fibrous dysplasia and ossifying fibroma. The more aggressive clinical behaviour of the latter is highlighted and a more radical surgical approach is recommended. In contradistinction, fibrous dysplasia can exhibit a more benign behaviour and radical surgery is not always justified. A clinicopathological distinction between these two conditions is important from a management perspective despite the fact that they both may be encompassed under the 'umbrella' term fibro-osseous lesion.

  13. A solitary fibrous tumor of the retroperitoneum: CT findings

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jeong Min; Kim, Chong Soo; Lee, Dong Keun; Cho, Baek Hwan [Chonbuk National Univ. College of Medicine, Chunju (Korea, Republic of); Han, Hyun Young [Euljy Mecical School, Seoul (Korea, Republic of)

    1999-01-01

    The solitary fibrous tumor is a rare spindle cell neoplasm of mesodermal origin. It usually arises in the pleura, though has recently been reported in the peritoneum and at nonserosal sites ; it is, however, extremely rare in the retroperitonum. The authors describe one case of a solitary fibrous tumor that occurred as a huge complex mass in the retroperitoneum of an adult. Preenhanced CT scans showed that the mass was sharply delineated from surrounding organs and that tumor density was the same as that of surrounding musculature. Peripheral Calcifications were noted, and postenhanced scans showed intense, gradual enhancement of solid portions of the mass, with nonenhanced cystic portions. Although not specific, solitary fibrous tumors must be included in the differential diagnosis of a large retroperitoneal tumor of complex consistency and with internal calcification.

  14. Radiological analysis of polyostotic fibrous dysplasia in skeletal system

    International Nuclear Information System (INIS)

    Shin, Ma Rie; Kim, Jin Sik; Kim, Han Suk; Park, Soo Soung

    1984-01-01

    Over a period of recent 3 years, the 5 cases of polyostotic fibrous dysplasia were proven histologically at National Medical Center, and they were evaluated and analyzed radiologically and clinically. The results were as follows: 1. The age of 5 patients ranged from 12 to 21. 2. In general, clinical symptoms of these patients were pain of affected sites and swelling , fracture, walking disturbance of lower extremities. 3. The order of frequent site of polyostotic fibrous dysplasia was skull (4 cases), femur (3 cases), maxilla (2 case), humerus, tibia, rib, radius, metacarpal bone and phalanx. 4. The characteristic radiological findings of polyostotic fibrous dysplasia were multicystic lesions with ground glass appearance, osteosclerosis, cortical thinning and pathologic fracture and deformity of long bones. Particularly, in the extremities, multicystic radiolucencies, groud glass appearance, shepherd's crook and coxa vara deformities were noticed, and in the skull and maxilla, sclerotic changes were principally demonstrated.

  15. Polyostotic Fibrous Dysplasia of Cranio-Maxillofacial Area

    Energy Technology Data Exchange (ETDEWEB)

    Han, Jin Woo; Kwon, Hyuk Rok; Lee, Jin Ho; Park, In Woo [Dept. of Oral and Maxillofacial Radiology, College of Dentistry, Kangnung National University, Kangnung (Korea, Republic of)

    2000-06-15

    Fibrous dysplasia is believed to be a hamartomatous developmental lesion of unknown origin. This disease is divided into monostotic and polyostotic fibrous dysplasia. Polyostotic type can be divided into craniofacial type, Lichtenstein-Jaffe type, and McCune-Albright syndrome. In this case, a 31-year-old female presented spontaneous loss of right mandibular teeth before 5 years and has shown continuous expansion of right mandibular alveolus. Through the radiographic view, the coarse pattern of the mixed radiopaque-lucent lesion was seen on the right mandibular body, and there was diffuse pattern of the mixed radiopaque-lucent lesion with ill-defined margin in the left mandibular body. In the right calvarium, the lesion had cotton-wool appearance. Partial excision for contouring, multiple extraction, and alveoloplasty were accomplished under general anesthesia for supportive treatment. Finally we could conclude this case was polyostotic fibrous dysplasia of cranio-maxillofacial area based on the clinical, radiologic finding, and histopathologic examination.

  16. Fibrous dysplasia of the jaws: a case report.

    Science.gov (United States)

    Chindia, M L

    1991-04-01

    This article reviews the present clinical, radiographic and histologic features of fibrous dysplastic lesions of the jaws. A case is presented of an apparently reactivated fibrous dysplastic jaw lesion, with evidence of cystic degeneration, in a 33-year-old female school-teacher who was first seen at the Department of Dental Surgery, University of Nairobi in March 1986. The dilemma in the management of fibrous dysplasia is reviewed and discussed. It is noted that while conservative surgical procedures remain the treatment of choice, situations arise where tremendous tissue activity would require early intervention by numerous cosmetic surgical shaving procedures. The present case, however, offers a unique management challenge due to the occurrence of extensive cystic degeneration in the mandible.

  17. Optical and electrochemical studies of polyaniline/SnO{sub 2} fibrous nanocomposites

    Energy Technology Data Exchange (ETDEWEB)

    Manivel, P. [Department of Nanoscience and Technology, Bharathiar University, Coimbatore 641 046, Tamil Nadu (India); Ramakrishnan, S.; Kothurkar, Nikhil K. [Department of Chemical Engineering and Material Science, Amrita Vishwa Vidyapeetham, Coimbatore 641 112, Tamil Nadu (India); Balamurugan, A.; Ponpandian, N.; Mangalaraj, D. [Department of Nanoscience and Technology, Bharathiar University, Coimbatore 641 046, Tamil Nadu (India); Viswanathan, C., E-mail: viswanathan@buc.edu.in [Department of Nanoscience and Technology, Bharathiar University, Coimbatore 641 046, Tamil Nadu (India)

    2013-02-15

    Graphical abstract: Fiber with porous like structure of PANI/SnO{sub 2} nanocomposites were prepared by simplest in situ chemical polymerization method. The PL emission spectra revealed that the band from 404 and 436 nm which is related with oxygen vacancies. The excellent electrochemical properties of composite electrode show the specific capacitance of 173 F/g at a scan rate of 25 m V/s. Display Omitted Highlights: ► Self assembled PANI/SnO{sub 2} nanocomposites were synthesized by simple polymerization method. ► Electrochemical behavior of PANI/SnO{sub 2} nanocomposites electrode was analyzed by CV. ► Nanocomposites exhibit a higher specific capacitance of 173 F/g, compared with pure SnO{sub 2}. -- Abstract: Polyaniline (PANI)/tin oxide (SnO{sub 2}) fibrous nanocomposites were successfully prepared by an in situ chemical polymerization method with suitable conditions. The obtained composites were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy, photoluminescence (PL), electrical conductivity and cyclic voltammetry studies (CV). The XRD pattern of the as-prepared sample shows the presence of tetragonal SnO{sub 2} and the crystalline structure of SnO{sub 2} was not affected with the incorporation of PANI. The FTIR analysis confirms the uniform attachment of PANI on the surface of SnO{sub 2} nanostructures. SEM images show a fibrous agglomerated structure of PANI/SnO{sub 2}. The PL emission spectra revealed that the band from 404 and 436 nm which is related with oxygen vacancies. The electrochemical behavior of the PANI/SnO{sub 2} composite electrode was evaluated in a H{sub 2}SO{sub 4} solution using cyclic voltammetry. The composite electrode exhibited a specific capacitance of 173 F/g at a scan rate 25 mV/s. Thus the as-prepared PANI/SnO{sub 2} composite shows excellent electrochemical properties, suggesting that this composite is a promising material for supercapacitors.

  18. A case of monostotic fibrous dysplasia of the maxillary sinus.

    Science.gov (United States)

    Erdem, L Oktay; Erdem, C Zuhal; Kargi, Sebnem

    2003-05-01

    Fibrous dysplasia is an uncommon benign disease of the bone, with slow progression. Monostotic involvement of the paranasal sinuses is rare. We report a 54-year-old woman who had complaints of facial asymmetry, chronic sinusitis, recurrent headaches, and nasal obstruction for two years. Conventional radiography showed opacification and expansion of the maxillary sinus. Axial and coronal computed tomography scans showed a heterogeneous mass that expanded the right maxillary sinus, leading to nasal obstruction and cortical thickening of the maxilla. No signs of destruction or erosion in the cortical bone were identified. An endonasal endoscopic biopsy was performed and the diagnosis of fibrous dysplasia was confirmed histologically.

  19. Treatment of craniofacial fibrous dysplasia: a case report.

    Science.gov (United States)

    Carini, F; Saggese, V; Porcaro, G; Baldoni, M

    2014-01-01

    The concept of "fibro-osseous lesions" of bone has evolved over the last several years and now includes two mayor entities: the fibrous dysplasia (FD) and the cement-ossifying fibroma (COF). Fibrous dysplasia is considered to be a developmental, tumor-like (hamartomatous), fibro-osseous disease of unknown etiology. There is a maxillary predominance when craniofacial FD occurs in the jaws and the maxillary sinus is commonly involved. Differentiation of OF from FD is important because of differences in treatment and behaviour. This article report a case of 60-year-old female with a history of painless unilateral palatal swelling.

  20. Cystic fibrous dysplasia mimicking giant cell tumor: MRI appearance

    Energy Technology Data Exchange (ETDEWEB)

    Okada, Kyoji; Yoshida, Sumiko [Department of Orthopaedics, Akita University School of Medicine, Akita (Japan); Okane, Kumiko [Department of Radiology, Akita University School of Medicine, Akita (Japan); Sageshima, Masato [Division of Clinical Pathology, Akita University Hospital, Akita (Japan)

    2000-01-01

    We report the case of a 43-year-old man who presented with an osteolytic and expansive lesion in the left distal femur mimicking a giant cell tumor. Magnetic resonance imaging (MRI) showed that most of the lesion was cystic, and histological examination revealed fibrous dysplasia with marked cystic degeneration. Radiographic findings of cystic fibrous dysplasia in the end of a long bone may be similar to those of a giant cell tumor, and a biopsy is essential for the final diagnosis. (orig.)

  1. Brisement force in fibrous ankylosis: A technique revisited

    Directory of Open Access Journals (Sweden)

    Udupikrishna M Joshi

    2016-01-01

    Full Text Available Fibrous ankylosis is a common complication of trauma to the temporomandibular joint (TMJ in children. Proper treatment and regular follow-up is necessary for its successful management. This report highlights a case of posttraumatic fibrous ankylosis successfully managed with brisement force-gradual tractional forces applied to the TMJ under local anesthesia without any associated complications. Mouth opening increased significantly from 15 to 35 mm. The patient was advised to perform rigorous physiotherapy at home, to maintain interincisal opening of 35 mm. The case was followed up for 6 months with no decrease in mouth opening.

  2. A Solitary Fibrous Tumor of the Pleura Revealed by Hiccups

    Directory of Open Access Journals (Sweden)

    A. Chafik

    2011-01-01

    Full Text Available Solitary fibrous tumors of the pleura are rare and benign primary localized tumors; they possess a malignant potential and thus should be excised. We report a case of a 43-year-old woman, who had suffered for 5 years from right basithoracic pain associated with progressive dyspnea and persistent hiccups during the last 6 months. We have not found any similar case in the literature. Further testing after excision by thoracotomy revealed a solitary fibrous pleural tumor. A brief discussion of the clinical presentation and incidence of these tumors is included.

  3. Fibrous dysplasia of the jaws associated with secondary hyperparathyroidism: a case report

    Energy Technology Data Exchange (ETDEWEB)

    Whi, Jung Hyun; Kim, Young Joo; Chun, Kyung Ah; Kim, Ki Tae; Chang, Eun Deok; Kim, Young Ok; Lee, Won [The Catholic University of Korea, Uijongbu (Korea, Republic of)

    2007-06-15

    There have been few reports on fibrous dyplasia associated with secondary hyperparathyroidism. We report a case of a hemodialysis patient with secondary hyperparathyroidism concomitant with fibrous dysplasia of the jaws causing an abnormal deformity.

  4. Fibrous dysplasia of the jaws associated with secondary hyperparathyroidism: a case report

    International Nuclear Information System (INIS)

    Whi, Jung Hyun; Kim, Young Joo; Chun, Kyung Ah; Kim, Ki Tae; Chang, Eun Deok; Kim, Young Ok; Lee, Won

    2007-01-01

    There have been few reports on fibrous dyplasia associated with secondary hyperparathyroidism. We report a case of a hemodialysis patient with secondary hyperparathyroidism concomitant with fibrous dysplasia of the jaws causing an abnormal deformity

  5. In-situ bioremediation via horizontal wells

    International Nuclear Information System (INIS)

    Hazen, T.C.; Looney, B.B.; Enzien, M.; Franck, M.M.; Fliermans, C.B.; Eddy, C.A.

    1993-01-01

    This project is designed to demonstrate in situ bioremediation of groundwater and sediment contaminated with chlorinated solvents. Indigenous microorganisms were stimulated to degrade TCE, PCE and their daughter products in situ by addition of nutrients to the contaminated zone. In situ biodegradation is a highly attractive technology for remediation because contaminants are destroyed, not simply moved to another location or immobilized, thus decreasing costs, risks, and time, while increasing efficiency and public and regulatory acceptability. Bioremediation has been found to be among the least costly technologies in applications where it will work (Radian 1989). Subsurface soils and water adjacent to an abandoned process sewer line at the SRS have been found to have elevated levels of TCE (Marine and Bledsoe 1984). This area of subsurface and groundwater contamination is the focus of a current integrated demonstration of new remediation technologies utilizing horizontal wells. Bioremediation has the potential to enhance the performance of in situ air stripping as well as offering stand-alone remediation of this and other contaminated sites (Looney et al. 1991). Horizontal wells could also be used to enhance the recovery of groundwater contaminants for bioreactor conversions from deep or inaccessible areas (e.g., under buildings) and to enhance the distribution of nutrient or microbe additions in an in situ bioremediation

  6. Repair of isolated double-chambered right ventricle | El Kouache ...

    African Journals Online (AJOL)

    The finding of a double-chambered right ventricle (DCRV) is exceptionally rare as an isolated anomaly. It is a congenital cardiac anomaly in which the right ventricle is separated into two chambers, a proximal highpressure chamber and a distal low-pressure chamber, by anomalous muscles or fibrous tissues in the right ...

  7. Meckel's Diverticulum associated with a thin fibrous band causing ...

    African Journals Online (AJOL)

    We report a case of an infant, three and half month old who presented with acute abdomen. Investigations including complete blood count and X-ray abdomen were non informative apart from showing evidence of intestinal obstruction. On abdominal exploration, there was a thin fibrous band attached to the apex of Meckel's ...

  8. Use of Zoledronic Acid in Paediatric Craniofacial Fibrous Dysplasia

    Directory of Open Access Journals (Sweden)

    Chiara Di Pede

    2016-01-01

    Full Text Available We describe a case of a paediatric patient affected by mandibular fibrous dysplasia (FD with severe and chronic pain who was successfully treated with zoledronic acid (ZOL: a third-generation bisphosphonate. Further research is needed to assess its safety and efficacy as a treatment option for FD in the paediatric population.

  9. Effects of Different Sources of Non-Fibrous Carbohydrate on ...

    African Journals Online (AJOL)

    Dr.taimouri

    fibre carbohydrate .... Non-fibrous carbohydrate (NFC) was calculated as: ..... Food Res. 35, 99-112. O'Doherty, J.V., Maher, P.F. & Crosby, T.F., 1997. The performance of pregnant ewes and their progeny when offered grass silage, maize silage or ...

  10. An unusual case of fibrous dysplasia of the maxillary sinus.

    Science.gov (United States)

    Crawford, Larry B

    2003-12-01

    Fibrous dysplasia of the maxillary sinus might initially become apparent because of facial asymmetry. It can be differentiated from other osseo-odontogenic dysplasias radiographically by its occupancy of the affected sinus and by its diffuse, ground-glass, radiopaque appearance; it can be further confirmed with histologic findings. It is normally self-limiting in growth and does not usually become malignant.

  11. Frictional behaviour of high performance fibrous tows: Friction experiments

    NARCIS (Netherlands)

    Cornelissen, Bo; Rietman, Bert; Akkerman, Remko

    2013-01-01

    Tow friction is an important mechanism in the production and processing of high performance fibrous tows. The frictional behaviour of these tows is anisotropic due to the texture of the filaments as well as the tows. This work describes capstan experiments that were performed to measure the

  12. Skeletal muscle ultrasound: correlation between fibrous tissue and echo intensity.

    NARCIS (Netherlands)

    Pillen, S.; Tak, R.O.; Zwarts, M.J.; Lammens, M.M.Y.; Verrijp, K.; Arts, I.M.P.; Laak, J.A.W.M. van der; Hoogerbrugge, P.M.; Engelen, B.G.M. van; Verrips, A.

    2009-01-01

    In this study, we examined the correlation between muscle ultrasound and muscle structure. Echo intensity (EI) of 14 muscles of two golden retriever muscular dystrophy dogs was correlated to the percentage interstitial fibrous tissue and fat in muscle biopsy. A significant correlation between

  13. HDPE/COC blends with fibrous morphology and their properties

    Czech Academy of Sciences Publication Activity Database

    Vacková, Taťana; Šlouf, Miroslav; Nevoralová, Martina; Kaprálková, Ludmila

    2012-01-01

    Roč. 48, č. 12 (2012), s. 2031-2039 ISSN 0014-3057 R&D Projects: GA ČR GP106/09/P272 Institutional research plan: CEZ:AV0Z40500505 Keywords : polymer blend * phase morphology * fibrous structure Subject RIV: JI - Composite Materials Impact factor: 2.562, year: 2012

  14. Giant solitary fibrous tumor of the lung: A case report

    OpenAIRE

    Xiao, Ping; Sun, Linlin; Zhong, Diansheng; Lian, Linjuan; Xu, Dongbo

    2014-01-01

    A solitary fibrous tumor arising from the lung parenchyma is rarely described. Here, we present the clinical, imaging, and histological features of a case of a 54-year-old woman with an incidental lung mass of the right lower lobe on a chest radiograph.

  15. Electrospinning of caseinates to create protective fibrous mats

    Science.gov (United States)

    Electrospinning is a nonthermal process that produces fibers on the micron- or nano-scale from a polymer solution. If produced by electrospinning of biopolymer solutions, fibrous mats may be created for protecting foods and allowing for the preservation and controlled release of bioactives for healt...

  16. Keratins are the widely distributed fibrous proteins of our ...

    African Journals Online (AJOL)

    SAJID DANWAR

    2013-01-17

    Jan 17, 2013 ... Keratins are the widely distributed fibrous proteins of our environment. Keratinase are proteolytic enzymes responsible for hydrolyzing insoluble keratin largely produced by microorganisms including fungi. The isolation, identification and characterization of a non-dermatophytic keratinolytic fungal strain of ...

  17. ADVANTAGES/DISADVANTAGES FOR ISCO METHODS IN-SITU FENTON OXIDATION IN-SITU PERMANGANATE OXIDATION

    Science.gov (United States)

    The advantages and disadvantages of in-situ Fenton oxidation and in-situ permanganate oxidation will be presented. This presentation will provide a brief overview of each technology and a detailed analysis of the advantages and disadvantages of each technology. Included in the ...

  18. In situ precise electrospinning of medical glue fibers as nonsuture dural repair with high sealing capability and flexibility

    Directory of Open Access Journals (Sweden)

    Lv FY

    2016-08-01

    Full Text Available Fu-Yan Lv,1,* Rui-Hua Dong,1,* Zhao-Jian Li,2,* Chong-Chong Qin,1 Xu Yan,1,3 Xiao-Xiao He,1 Yu Zhou,4 Shi-Ying Yan,1 Yun-Ze Long1,3 1Collaborative Innovation Center for Nanomaterials & Optoelectronic Devices, College of Physics, Qingdao University, 2Department of Neurosurgery, Affiliated Hospital of Qingdao University, 3Industrial Research Institute of Nonwovens & Technical Textiles, College of Textiles & Clothing, 4Medical College, Qingdao University, Qingdao, People’s Republic of China *These authors contributed equally to this work Purpose: In this work, we propose an in situ precise electrospinning of medical glue fibers onto dural wound for improving sealing capability, avoiding tissue adhesion, and saving time in dural repair.Methods: N-octyl-2-cyanoacrylate, a commercial tissue adhesive (medical glue, can be electrospun into ultrathin fibrous film with precise and homogeneous deposition by a gas-assisted electrospinning device.Results: The self-assembled N-octyl-2-cyanoacrylate film shows high compactness and flexibility owing to its fibrous structure. Simulation experiments on egg membranes and goat meninges demonstrated that this technology can repair small membrane defects quickly and efficiently.Conclusion: This method may have potential application in dural repair, for example, working as an effective supplementary technique for conventional dura suture. Keywords: cyanoacrylates, electrospun fibers, in situ repair dural, gas-assisted electrospinning apparatus

  19. Solitary Fibrous Tumour of the Pleura – Cases Analysis

    International Nuclear Information System (INIS)

    Jadczak, Przemysław; Guz, Wiesław; Kaznowska, Ewa; Ramotowski, Radosław; Szalacha-Tarała, Ewa; Górecki, Andrzej; Samojedny, Antoni

    2014-01-01

    Isolated fibrous tumor of the pleura (SFTP – Solitary fibrous tumour of the pleura/localized fibrous tumour of the pleura) is a rare primary tumour of the pleura of mesenchymal origin. In most cases, it is a benign lesion. It is composed of spindle cells similar to fibroblasts and derives probably from submesothelial mesenchyme. The aim of the study was to analyze clinical symptoms, incidence, possibility of suggesting the diagnosis on the basis of imaging tests, and confirmation of the diagnosis in pathological tests with regard to studies of histochemistry examination. Clinical and morphological material obtained from 14 patients from Department of Thoracic Surgery of Subcarpathian Chest Disease Center treated between year 2004 and 2010 was analysed. In the first stage, selected cases of patients with isolated fibrous tumour of the pleura were chosen from the archives and the analysis of their medical history was carried out. Basic information about age, gender, medical history, smoking habit, physical examination and results of imaging, endoscopic and morphological examinations were noted. The second parallel component of the study was pathomorphological examinations of the surgical material obtained from the patients, including the assessment of morphology and immunohistochemistry. Of the 14 examined patients, fibrous tumour occurred in 8 men and 6 women. The age range of the patients was 37–73 years, with a peak attributable to the 6 th decade of life. In 8 patients the tumour was detected incidentally during routine examinations. In 7 patients there were no clinical signs of respiratory disease, and if present, then the most common complaint was shortness of breath. Regarding symptoms not connected with the respiratory system, anemia occurred most frequently. Fibrous tumour of the pleura was more often associated with the visceral pleura than with the parietal pleura. The largest lesion was approximately 20 cm in size. Fibrous tumour of the pleura is a

  20. A new device for high-temperature in situ GISAXS measurements

    Science.gov (United States)

    Fritz-Popovski, Gerhard; Bodner, Sabine C.; Sosada-Ludwikowska, Florentyna; Maier, Günther A.; Morak, Roland; Chitu, Livia; Bruegemann, Lutz; Lange, Joachim; Krane, Hans-Georg; Paris, Oskar

    2018-03-01

    A heating stage originally designed for diffraction experiments is implemented into a Bruker NANOSTAR instrument for in situ grazing incidence small-angle x-ray scattering experiments. A controlled atmosphere is provided by a dome separating the sample environment from the evacuated scattering instrument. This dome is double shelled in order to enable cooling water to flow through it. A mesoporous silica film templated by a self-assembled block copolymer system is investigated in situ during step-wise heating in air. The GISAXS pattern shows the structural development of the ordered lattice of parallel cylindrical pores. The deformation of the elliptical pore-cross section perpendicular to the film surface was studied with increasing temperature. Moreover, the performance of the setup was tested by controlled in situ heating of a copper surface under controlled oxygen containing atmosphere.

  1. Fracture Resistance Measurement Method for in situ Observation of Crack Mechanisms

    DEFF Research Database (Denmark)

    Sørensen, Bent F.; Horsewell, A.; Jørgensen, O.

    1998-01-01

    A special test fixture has been developed for fracture mechanical testing of brittle materials inside an environmental scanning electron microscope. The fixture loads a double cantilever beam specimen with pure bending moments and provides stable crack growth. Crack growth is detected by in situ...... observation and acoustic emission, As an example, crack growth in a cubic-phase yttria-stabilized zirconia is detected easily by in situ observation of the crack-tip region, Many fracture toughness measurements are obtained for each specimen, giving high confidence in the measured fracture toughness value......, In situ observation is useful for the study of toughening mechanisms and subcritical crack-growth behavior and to sort out erroneous measurements (e.g., due to crack branching)....

  2. New Textile Sensors for In Situ Structural Health Monitoring of Textile Reinforced Thermoplastic Composites Based on the Conductive Poly(3,4-ethylenedioxythiophene-poly(styrenesulfonate Polymer Complex

    Directory of Open Access Journals (Sweden)

    Ivona Jerkovic

    2017-10-01

    Full Text Available Many metallic structural and non-structural parts used in the transportation industry can be replaced by textile-reinforced composites. Composites made from a polymeric matrix and fibrous reinforcement have been increasingly studied during the last decade. On the other hand, the fast development of smart textile structures seems to be a very promising solution for in situ structural health monitoring of composite parts. In order to optimize composites’ quality and their lifetime all the production steps have to be monitored in real time. Textile sensors embedded in the composite reinforcement and having the same mechanical properties as the yarns used to make the reinforcement exhibit actuating and sensing capabilities. This paper presents a new generation of textile fibrous sensors based on the conductive polymer complex poly(3,4-ethylenedioxythiophene-poly(styrenesulfonate developed by an original roll to roll coating method. Conductive coating for yarn treatment was defined according to the preliminary study of percolation threshold of this polymer complex. The percolation threshold determination was based on conductive dry films’ electrical properties analysis, in order to develop highly sensitive sensors. A novel laboratory equipment was designed and produced for yarn coating to ensure effective and equally distributed coating of electroconductive polymer without distortion of textile properties. The electromechanical properties of the textile fibrous sensors confirmed their suitability for in situ structural damages detection of textile reinforced thermoplastic composites in real time.

  3. In situ macromolecular crystallography using microbeams.

    Science.gov (United States)

    Axford, Danny; Owen, Robin L; Aishima, Jun; Foadi, James; Morgan, Ann W; Robinson, James I; Nettleship, Joanne E; Owens, Raymond J; Moraes, Isabel; Fry, Elizabeth E; Grimes, Jonathan M; Harlos, Karl; Kotecha, Abhay; Ren, Jingshan; Sutton, Geoff; Walter, Thomas S; Stuart, David I; Evans, Gwyndaf

    2012-05-01

    Despite significant progress in high-throughput methods in macromolecular crystallography, the production of diffraction-quality crystals remains a major bottleneck. By recording diffraction in situ from crystals in their crystallization plates at room temperature, a number of problems associated with crystal handling and cryoprotection can be side-stepped. Using a dedicated goniometer installed on the microfocus macromolecular crystallography beamline I24 at Diamond Light Source, crystals have been studied in situ with an intense and flexible microfocus beam, allowing weakly diffracting samples to be assessed without a manual crystal-handling step but with good signal to noise, despite the background scatter from the plate. A number of case studies are reported: the structure solution of bovine enterovirus 2, crystallization screening of membrane proteins and complexes, and structure solution from crystallization hits produced via a high-throughput pipeline. These demonstrate the potential for in situ data collection and structure solution with microbeams. © 2012 International Union of Crystallography

  4. In situ vitrification: Application to buried waste

    International Nuclear Information System (INIS)

    Callow, R.A.; Thompson, L.E.

    1991-01-01

    Two in situ vitrification field tests were conducted in June and July 1990 at Idaho National Engineering Laboratory. In situ vitrification is a technology for in-place conversion of contaminated soils into a durable glass and crystalline waste form and is being investigated as a potential remediation technology for buried waste. The overall objective of the two tests was to assess the general suitability of the process to remediate buried waste structures found at Idaho National Engineering Laboratory. In particular, these tests were designed as part of a treatability study to provide essential information on field performance of the process under conditions of significant combustible and metal wastes, and to test a newly developed electrode feed technology. The tests were successfully completed, and the electrode feed technology provided valuable operational control for successfully processing the high metal content waste. The results indicate that in situ vitrification is a feasible technology for application to buried waste. 2 refs., 5 figs., 2 tabs

  5. Design Games for In-Situ Design

    DEFF Research Database (Denmark)

    Kristiansen, Erik

    2013-01-01

    The mobile culture has spawned a host of context-based products, like location-based and tag-based applications. This presents a new challenge for the designer. There is a need of design methods that acknowledge the context and allows it to influence the design ideas. This article focuses...... on a design problem where an in-situ design practice may further the early design process: the case of designing a pervasive game. Pervasive games are computer games, played using the city as a game board and often using mobile phones with GPS. Some contextual design methods exist, but we propose an approach...... that calls for the designer to conceptualise and perform ideas in-situ, that is on the site, where the game is supposed to be played. The problem was to design a creativity method that incorporated in-situ design work and which generated game concepts for pervasive games. The proposed design method, called...

  6. In situ structural studies with neutron diffraction

    International Nuclear Information System (INIS)

    Laversenne, L.; Hansen, T.C.

    2015-01-01

    The authors present the features of neutron diffraction in terms of necessary neutron sources, diffusion contrast, penetration and magnetism. In situ diffraction experiments consist in recording the diffraction signal of a sample when this sample undergoes a monitored change in one of the following parameters: temperature (thermo-diffraction), pressure, magnetic or electric field or gaseous atmosphere. Most in situ diffraction experiments are performed on powders and they required a more or less complex equipment according to the parameter that varies. Examples and results of in situ neutron diffraction experiments are detailed in the article: -) the electrochemical loading of electrodes, -) the absorption of hydrogen for energy storage, -) the study of materials under high pressure which has allowed the investigation of phase diagrams when the inter-atomic distance varies, and -) the study of magnetism through thermo-diffraction. (A.C.)

  7. Polymer-modified fibrous mesoporous silica nanoparticles as coating material for open-tubular capillary electrochromatography.

    Science.gov (United States)

    Liu, Yuanyuan; Liu, Qing; Yu, Haiyan; Sun, Shujun; Xue, Yun; Wang, Yan; Qu, Qishu; Yan, Chao

    2017-05-26

    A novel fibrous mesoporous silica nanoparticles (fSiO 2 ) stationary phase grafted with polymer (Poly (2-(dimethylamino) ethyl methacrylate) (PDMAEMA) was developed for open tubular capillary electrochromatography (OT-CEC). The preparation procedure included synthesizing fSiO 2 through biphase stratification approach, removing the surfactants, silanization and in situ graft polymerization with monomers via atom transfer radical polymerization (ATRP). Subsequently, PDMAEMA-modified mesoporous silica nanoparticles (P-fSiO 2 )/ethanol solution was immobilized onto the inner surface of the pretreated capillary and functionalized with octadecylsilane to fabricate the open-tubular column. Separation of polycyclic aromatic hydrocarbons (PAHs) and proteins were carried out to evaluate the performance of the column in CEC. The run-to-run, day-to-day and column-to-column reproducibility in terms retention time of naphthalene was 1.9%, 2.2%, and 3.7%, respectively. The effects of solvent concentration and pH on the separation were evaluated. The method was also used for the separation of real bio-sample, egg white proteins. Copyright © 2017 Elsevier B.V. All rights reserved.

  8. Electrospun Fibrous Scaffolds for Tissue Engineering: Viewpoints on Architecture and Fabrication.

    Science.gov (United States)

    Jun, Indong; Han, Hyung-Seop; Edwards, James R; Jeon, Hojeong

    2018-03-06

    Electrospinning has been used for the fabrication of extracellular matrix (ECM)-mimicking fibrous scaffolds for several decades. Electrospun fibrous scaffolds provide nanoscale/microscale fibrous structures with interconnecting pores, resembling natural ECM in tissues, and showing a high potential to facilitate the formation of artificial functional tissues. In this review, we summarize the fundamental principles of electrospinning processes for generating complex fibrous scaffold geometries that are similar in structural complexity to the ECM of living tissues. Moreover, several approaches for the formation of three-dimensional fibrous scaffolds arranged in hierarchical structures for tissue engineering are also presented.

  9. Electrospun Fibrous Scaffolds for Tissue Engineering: Viewpoints on Architecture and Fabrication

    Directory of Open Access Journals (Sweden)

    Indong Jun

    2018-03-01

    Full Text Available Electrospinning has been used for the fabrication of extracellular matrix (ECM-mimicking fibrous scaffolds for several decades. Electrospun fibrous scaffolds provide nanoscale/microscale fibrous structures with interconnecting pores, resembling natural ECM in tissues, and showing a high potential to facilitate the formation of artificial functional tissues. In this review, we summarize the fundamental principles of electrospinning processes for generating complex fibrous scaffold geometries that are similar in structural complexity to the ECM of living tissues. Moreover, several approaches for the formation of three-dimensional fibrous scaffolds arranged in hierarchical structures for tissue engineering are also presented.

  10. Electrospun Fibrous Scaffolds for Tissue Engineering: Viewpoints on Architecture and Fabrication

    Science.gov (United States)

    Jun, Indong; Han, Hyung-Seop; Edwards, James R.; Jeon, Hojeong

    2018-01-01

    Electrospinning has been used for the fabrication of extracellular matrix (ECM)-mimicking fibrous scaffolds for several decades. Electrospun fibrous scaffolds provide nanoscale/microscale fibrous structures with interconnecting pores, resembling natural ECM in tissues, and showing a high potential to facilitate the formation of artificial functional tissues. In this review, we summarize the fundamental principles of electrospinning processes for generating complex fibrous scaffold geometries that are similar in structural complexity to the ECM of living tissues. Moreover, several approaches for the formation of three-dimensional fibrous scaffolds arranged in hierarchical structures for tissue engineering are also presented. PMID:29509688

  11. In situ detection of Bartonella henselae cells

    Czech Academy of Sciences Publication Activity Database

    Hercík, Kamil; Melter, O.; Janeček, Jiří; Branny, Pavel

    2002-01-01

    Roč. 16, - (2002), s. 49-56 ISSN 0890-8508 R&D Projects: GA ČR GA310/98/0417; GA ČR GA204/99/1534 Keywords : bartonella henselae * in situ detection * hydridization Subject RIV: EE - Microbiology, Virology Impact factor: 1.269, year: 2002

  12. The Art of in situ Cryocrystallization

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 19; Issue 12. The Art of in situ Cryocrystallization ... Institute of Science Education and Research, Bhopal. Assistant Professor Department of Chemistry Academic Building 2 Room No 122 IISER, Bhopal Indore By-Pass Road Bhauri, Bhopal 462 066, India.

  13. Recovering uranium from coal in situ

    International Nuclear Information System (INIS)

    Terry, R.C.

    1978-01-01

    An underground carbonaceous deposit containing other mineral values is burned in situ. The underground hot zone is cooled down to temperature below the boiling point of a leachig solution. The leaching solution is percolated through the residial ash, with the pregnant solution recovered for separation of the mineral values in surface facilities

  14. IN SITU LEAD IMMOBILIZATION BY APATITE

    Science.gov (United States)

    Lead contamination is of environmental concern due to its effect on human health. The purpose of this study was to develop a technology to immobilize Pb in situ in contaminated soils and wastes using apatite. Hydroxyapatite [Ca10(PO4)6(O...

  15. Paleozoic in situ spores and pollen. Lycopsida

    Czech Academy of Sciences Publication Activity Database

    Bek, Jiří

    2017-01-01

    Roč. 296, 1/6 (2017), s. 1-111 ISSN 0375-0299 R&D Projects: GA ČR GAP210/12/2053 Institutional support: RVO:67985831 Keywords : in situ spores * reproductive organs * Lycopsida * Paleozoic Subject RIV: DB - Geology ; Mineralogy OBOR OECD: Paleontology Impact factor: 1.333, year: 2016

  16. In Situ Cleanable Alternative HEPA Filter Media

    International Nuclear Information System (INIS)

    Adamson, D. J.; Terry, M. T.

    2002-01-01

    The Westinghouse Savannah River Company, located at the Savannah River Site in Aiken, South Carolina, is currently testing two types of filter media for possible deployment as in situ regenerable/cleanable High Efficiency Particulate Air (HEPA) filters. The filters are being investigated to replace conventional, disposable, glass-fiber, HEPA filters that require frequent removal, replacement, and disposal. This is not only costly and subjects site personnel to radiation exposure, but adds to the ever-growing waste disposal problem. The types of filter media being tested, as part of a National Energy Technology Laboratory procurement, are sintered nickel metal and ceramic monolith membrane. These media were subjected to a hostile environment to simulate conditions that challenge the high-level waste tank ventilation systems. The environment promoted rapid filter plugging to maximize the number of filter loading/cleaning cycles that would occur in a specified period of time. The filters were challenged using nonradioactive simulated high-level waste materials and atmospheric dust; materials that cause filter pluggage in the field. The filters are cleaned in situ using an aqueous solution. The study found that both filter media were insensitive to high humidity or moisture conditions and were easily cleaned in situ. The filters regenerated to approximately clean filter status even after numerous plugging and in situ cleaning cycles. Air Techniques International is conducting particle retention testing on the filter media at the Oak Ridge Filter Test Facility. The filters are challenged using 0.3-mm di-octyl phthalate particles. Both the ceramic and sintered media have a particle retention efficiency > 99.97%. The sintered metal and ceramic filters not only can be cleaned in situ, but also hold great potential as a long life alternative to conventional HEPA filters. The Defense Nuclear Facility Safety Board Technical Report, ''HEPA Filters Used in the Department of

  17. Contemporary management of ductal carcinoma in situ and lobular carcinoma in situ.

    Science.gov (United States)

    Obeng-Gyasi, Samilia; Ong, Cecilia; Hwang, E Shelley

    2016-06-01

    The management of in situ lesions ductal carcinoma in situ (DCIS) and lobular carcinoma in situ (LCIS) continues to evolve. These diagnoses now comprise a large burden of mammographically diagnosed cancers, and with a global trend towards more population-based screening, the incidence of these lesions will continue to rise. Because outcomes following treatment for DCIS and LCIS are excellent, there is emerging controversy about what extent of treatment is optimal for both diseases. Here we review the current approaches to the diagnosis and treatment of both DCIS and LCIS. In addition, we will consider potential directions for future management of these lesions.

  18. Extraction of uranium from sea water by means of fibrous complex adsorbents

    International Nuclear Information System (INIS)

    Miyamatsu, Tokuhisa; Oguchi, Noboru; Kanchiku, Yoshihiko; Aoyagi, Takanobu

    1982-01-01

    Fibrous complex adsorbents for uranium extraction from sea water were prepared by introducing titanic acid or basic zinc carbonate as effective constituents into fibrous ion exchangers. A fibrous chelate type adsorbent was also tested. Among the adsorbents examined, the following ones demonstrated excellent properties for the recovery of uranium from sea water. a) A fibrous, weakly acidic cation exchanger was treated with titanyl sulfate in aqueous sulfuric acid solution, which was followed by neutralization to afford a fibrous adsorbent containing titanic acid (QC-1f(Ti)). The adsorption capacity for uranium in sea water was estimated by extrapolation to be 50μg-U/g-Ad or 1170 μg-U/g-Ti. b) A fibrous, strongly acidic cation exchanger was treated in a similar way to afford another type of fibrous adsorbent with titanic acid incorporated (QCS-Ti). The adsorption capacity was estimated by extrapolation to be 20-30 μg-U/g-Ad. (author)

  19. In Situ Remediation Integrated Program: Technology summary

    Energy Technology Data Exchange (ETDEWEB)

    1994-02-01

    The In Situ Remediation Integrated Program (ISR IP) was instituted out of recognition that in situ remediation could fulfill three important criteria: significant cost reduction of cleanup by eliminating or minimizing excavation, transportation, and disposal of wastes; reduced health impacts on workers and the public by minimizing exposure to wastes during excavation and processing; and remediation of inaccessible sites, including: deep subsurfaces, in, under, and around buildings. Buried waste, contaminated soils and groundwater, and containerized wastes are all candidates for in situ remediation. Contaminants include radioactive wastes, volatile and non-volatile organics, heavy metals, nitrates, and explosive materials. The ISR IP intends to facilitate development of in situ remediation technologies for hazardous, radioactive, and mixed wastes in soils, groundwater, and storage tanks. Near-term focus is on containment of the wastes, with treatment receiving greater effort in future years. ISR IP is an applied research and development program broadly addressing known DOE environmental restoration needs. Analysis of a sample of 334 representative sites by the Office of Environmental Restoration has shown how many sites are amenable to in situ remediation: containment--243 sites; manipulation--244 sites; bioremediation--154 sites; and physical/chemical methods--236 sites. This needs assessment is focused on near-term restoration problems (FY93--FY99). Many other remediations will be required in the next century. The major focus of the ISR EP is on the long term development of permanent solutions to these problems. Current needs for interim actions to protect human health and the environment are also being addressed.

  20. In Situ Remediation Integrated Program: Technology summary

    International Nuclear Information System (INIS)

    1994-02-01

    The In Situ Remediation Integrated Program (ISR IP) was instituted out of recognition that in situ remediation could fulfill three important criteria: significant cost reduction of cleanup by eliminating or minimizing excavation, transportation, and disposal of wastes; reduced health impacts on workers and the public by minimizing exposure to wastes during excavation and processing; and remediation of inaccessible sites, including: deep subsurfaces, in, under, and around buildings. Buried waste, contaminated soils and groundwater, and containerized wastes are all candidates for in situ remediation. Contaminants include radioactive wastes, volatile and non-volatile organics, heavy metals, nitrates, and explosive materials. The ISR IP intends to facilitate development of in situ remediation technologies for hazardous, radioactive, and mixed wastes in soils, groundwater, and storage tanks. Near-term focus is on containment of the wastes, with treatment receiving greater effort in future years. ISR IP is an applied research and development program broadly addressing known DOE environmental restoration needs. Analysis of a sample of 334 representative sites by the Office of Environmental Restoration has shown how many sites are amenable to in situ remediation: containment--243 sites; manipulation--244 sites; bioremediation--154 sites; and physical/chemical methods--236 sites. This needs assessment is focused on near-term restoration problems (FY93--FY99). Many other remediations will be required in the next century. The major focus of the ISR EP is on the long term development of permanent solutions to these problems. Current needs for interim actions to protect human health and the environment are also being addressed

  1. A giant cranial aneurysmal bone cyst associated with fibrous dysplasia.

    Science.gov (United States)

    Składzieriń, J; Olés, K; Zagólski, O; Moskała, M; Sztuka, M; Strek, P; Wierzchowski, W; Tomik, J

    2008-01-01

    An aneurysmal bone cyst (ABC) is a rare, benign fibro-osseous lesion, considered a vascular phenomenon secondary to fibrous dysplasia or a giant-cell tumour, and occurs mainly in long bones and vertebrae. In this case report a 16-year-old male presented with massive epistaxis. He was admitted with a 3-year history of chronic rhinitis, headaches, right ocular pain and recurrent epistaxis. CT scans showed a predominantly cystic, expansive mass obstructing both nasal cavities, extending to all paranasal sinuses and both orbits, with evidence of anterior cranial fossa skull base destruction. The patient underwent a craniofacial resection of the tumour performed with an external approach and an immediate reconstruction of the dural defect. Histology confirmed the lesion was an ABC associated with fibrous dysplasia. The patient's recovery was complete. A large facial aneurysmal bone cyst can damage the facial skeleton and skull base, and requires excision by a combined external approach.

  2. Spontaneous involution of diffuse fibrous dysplasia of paranasal sinuses.

    Science.gov (United States)

    De Carlo, D; Zotto, L Dal; Carollo, C; Porzionato, A; D'Avella, D; Pomerri, F; Battistella, P A

    2015-05-01

    We report the case of a 25-year-old patient, diagnosed at age 10, with diffuse fibrous dysplasia of the paranasal sinuses, an extremely rare idiopathic condition. This diagnosis is possible only by cerebral computed tomography (CT), cerebral and anterior skull base magnetic resonance imaging (MRI), and histopathology. Surgical treatment is common. This boy had mild symptoms: moderate headache in the morning that did not affect his daily activity, and rhinitis, partially responsive to medication. The neurologic examination was abnormal. Radiographs, CT, and MRI showed a diffuse mass in the paranasal sinuses which had a histopathological diagnosis of fibrous dysplasias. The family refused to refer the patient to surgery. The boy has been monitored annually for 15 years. He has remained asymptomatic without headache since age 11, with normal, general and neurologic examinations. Serial MRIs showed a spontaneous partial involution of the mass. © The Author(s) 2014.

  3. Aging-caused changes in optical anisotropy of fibrous tissues

    Science.gov (United States)

    Mikhailova, Alyona D.; Ermolenko, Sergey B.; Zimnyakov, Dmitry A.; Angelsky, Oleg V.

    2009-10-01

    Energy density approach as a modification of the coherent potential approximation was applied to analyze the influence of aging-caused changes in the fibrous tissue on its birefringence. The real fibrous tissue such as tendon was modeled by disordered array of partially oriented dielectric cylinders illuminated by a normally incident linearly polarized plane wave. The supraspinatus human tendon was taken as an object for theoretical modeling. The morphological features of the studied tissue were considered for a system of collagen fiber bundles embedded in a carbohydrate matrix. The latter one is a mixture of glycosaminoglycans and proteoglycans. Age-caused changes of the fibers and matrix influence on the spectral dependence of optical anisotropy spectrum.

  4. Interaction of ruby laser with carbon fibrous materials

    Directory of Open Access Journals (Sweden)

    Stašić Jelena M.

    2007-01-01

    Full Text Available Carbon fibrous materials are interesting because of their good properties and numerous possible applications. The characteristics of these materials can be programmed by careful selection of the modification process parameters. The laser technique can be successfully employed for these purposes. The high temperatures arising in the material during a short laser pulse can cause a number of changes in the material. Carbon fibrous materials with different textile shapes, during different stages of processing, were exposed to laser radiation. A ruby laser (X=694.3 nm was used to modify the material. The structural changes were examined by scanning electron microscopy and X-ray diffraction. It was established that the radiation of this laser induces structural changes leading to a better arrangement of the turbostratic carbon fiber structure.

  5. [Fibrous dysplasia of maxilla and the orthodontic treatment. Case report].

    Science.gov (United States)

    Syryńska, Maria; Szyszka, Liliana; Kowalczyk, Robert; Wedrychowska-Szulc, Barbara

    2007-01-01

    Patients who have malocclusions caused by bone diseases come to see the dentist for the orthodontic treatment. One of these diseases is fibrous dysplasia. The aim of this study was to present the patient with the active form of fibrous dysplasia who reported to the Orthodontic Department of Pomeranian Medical University in Szczecin for treatment. We used the patient's own documentation, photos, radiological view and histopathological investigations. The extraoral, clinical examination revealed the asymmetry of the face on the left side, while the intraoral examination showed the convex lesion similar to an egg on the palate which crosses the medial line and clear "distension" of the alveolar bone in the direction of the oral vestibule. The dysplastic lesions are extensive and cause numerous malocclusions and disorders of the symmetry. The radiological and histopathological examinations were added to the clinical examination. The panoramic radiographs have shown the asymmetry and heterogenic structure of the bone with areas of"ground glass". Computer tomography demonstrated bumpy thickening of the zygomatic bone, maxilla, and a great wing of the sphenoid bone and almost completely filled maxillary sinus. The histopathological examination is the confirmation of the diagnosis of fibrous dysplasia. It demonstrates immature bone. The diagnosis of fibrous dysplasia commands the periodic observation and the postponement of the orthodontic treatment in the stage of active development of lesions, but when the overgrowth impairs the function, there is the necessity to use surgical and radical excision to remove lesions. We must pay particular attention to the possibility of malignant transformation of these lesions.

  6. Malignant fibrous histiocytoma of pancreas: presentation of a case

    International Nuclear Information System (INIS)

    Garcia Sanchez, M.A.; Serrano Gotarredona, M.P.; Fernandez-Cruz, J.; Marrero Calvo, S.

    1995-01-01

    We present a case of malignant fibrous histiocytoma (MFH) located in the body and tail of the pancreas of a 60-year-old woman. The mass was large, lobulated and well delimited by a pseudocapsule. Pancreatectomy involving the body and tail and splenectomy were performed and the diagnosis was reached on the basis of pathological and immunohistochemical studies. The course was aggressive with local recurrence and liver metastases presenting two months after the operation. The computerized tomography (CT) findings are provided. (Author)

  7. Characteristics of sinonasal fibrous dysplasia: experience from a single department.

    Science.gov (United States)

    Duan, Chen; Dai, Qi; Liu, Quan; Yu, Hongmeng

    2018-01-01

    We summarized the characteristics of fibrous dysplasia patients in our department to obtain clinical data on this disease. We retrospectively reviewed 28 patients who were diagnosed with sinonasal fibrous dysplasia based on pathological examination results from March 2012 to February 2017 in our department. The 28 patients included 16 females and 12 males, and the median age was 31.5 (range, 7-69) years. The three most common symptoms were nasal obstruction (25%), impaired vision (21%) and headache (18%). Most of the tumors were located in the sphenoid sinus (50%), nasal cavity (39%) or ethmoid sinus (36%). The surgical strategy included an exclusive endoscopic approach (25 cases) and an endoscopic approach combined with sublabial incision (three cases). The median follow-up period was 29 months (range, 3-62 months), and three patients were lost to follow-up. Two of the remaining 25 patients developed recurrence. However, since the second surgery, there has been no recurrence to date. Our study indicates that the treatment of fibrous dysplasia patients should be tailored according to patient and disease characteristics. The main surgical procedure is the endoscopic approach, and the effect is good. Although the recurrence rate is low, follow-up is necessary.

  8. Feed Technology of Fibrous Sugarcane Residues for Ruminants

    Directory of Open Access Journals (Sweden)

    Kuswandi

    2007-06-01

    Full Text Available Abundant sugarcane residue during shortage of roughage in dry season gives an opportunity to raise ruminants around sugarcane industries. However, these products are not widely used by farmers due to an assumption that the usage is inefficient and that the feed utilization technology is not widely recognized. Sugarcane fibrous residues (tops, bagasse and pith may be a potential feed component if pre-treated to increase its digestion and consumption by the animal, and/or supplemented by other ingredients to balance nutrients in the rumen as well as those for production purpose. Digestibility can be increased by chemical treatments such as ammoniation and other alkaline treatments, whereas consumption can be increased by physical treatments such as grinding, hammermilling or pelleting. Nutrients that are missing in these fibrous residues can be provided by addition of urea, molasses and minerals for maintenance need, and bypass nutrients (carbohydrates, protein and fats that are digested in the small intestine and available for tissue or milk synthesis. There are three options for development of livestock agribusiness based on fibrous sugarcane residues; however, these require several technologies to optimize the utilization of these residues.

  9. Growth performance and behaviour in grouped pigs fed fibrous diet.

    Science.gov (United States)

    Bakare, A G; Madzimure, J; Ndou, S P; Chimonyo, M

    2014-08-01

    The objective of the study was to investigate the effect of feeding fibrous diets on growth performance and occurrence of aggressive behaviours in growing pigs. Sixty healthy castrated pigs (initial body weight: 46.7±4.35 kg) were used. A basal diet was diluted with maize cobs to two levels (0 and 160 g/kg dry matter). Behavioural activities were observed using video cameras for three weeks, 8 h/d starting at 0800 h. Pigs subjected to control diet gained more weight compared to pigs receiving fibrous diet in week 1 (0.47 vs 0.15 kg, respectively) and 2 (1.37 vs 1.04, respectively) (pdiet in the third week. Pigs on high fibrous spent more time eating, lying down, standing, walking and fighting (pdiet. Time spent eating increased as the weeks progressed whilst time spent lying down decreased. Time of day had an effect on time spent on different behavioural activities exhibited by all pigs on different treatment diet (pdiet had more skin lesions in all body regions compared to pigs on control diet (pdiet with maize cobs did not affect growth performance and also did not reduce aggressive behaviours. Aggressive behaviours emanated out of frustration when queuing on the feeder. The findings of this study suggest that maize cobs can be included at a level of 160 g/kg in diets of pigs. However, to reduce the level of aggression more feeding space should be provided.

  10. Essential Oil Bioactive Fibrous Membranes Prepared via Coaxial Electrospinning.

    Science.gov (United States)

    Yao, Zhi-Cheng; Chen, Si-Cong; Ahmad, Zeeshan; Huang, Jie; Chang, Ming-Wei; Li, Jing-Song

    2017-06-01

    A novel antimicrobial composite material was prepared by encapsulating orange essential oil (OEO) in zein prolamine (ZP) via the coaxial electrospinning (ES) technique. By manipulating process parameters, the morphological features of ZP/OEO fibers were modulated. Fine fibers with diameters ranging from 0.7 to 2.3 μm were obtained by regulating ZP solution concentration and process parameters during the ES process. Optimal loading capacity (LC) and encapsulation efficiency (EE) of OEO in fibrous ZP mats were determined to be 22.28% and 53.68%, respectively, and were achieved using a 35 w/v% ZP ES solution. The encapsulation of OEO was found to be reliant on ZP solution concentration (the enveloping medium). SEM analysis indicates the surface morphology of ZP/OEO electrospun fibers is dependent on ZP solution loading volume, with lower ZP concentrations yielding defective fibrous structures (for example, beaded and spindled-string like morphologies). Furthermore, this loading volume also influences OEO LC, EE, mat water contact angle and oil retention. CCK-8 assay and cell morphology assessment (HEK293T cells) indicate no significant change with electrospun ZP and ZP/OEO fibrous membranes over an 8 h period. Antimicrobial activity assessment using Escherichia coli, suggests composite nonwovens possess sterilization properties; elucidating potential application in active food packaging, food preservation and therefore sustainability. © 2017 Institute of Food Technologists®.

  11. WIPP/SRL in-situ tests

    International Nuclear Information System (INIS)

    Mamsey, W.G.

    1990-01-01

    The Materials Interface Interactions Test (MIIT) is the only in-situ program involving the burial of simulated high-level waste forms operating in the United States. Fifteen glass and waste form compositions and their proposed package materials, supplied by 7 countries, are interred in salt at the Waste Isolation Pilot Plant (WIPP) in Carlsbad, New Mexico. A joint effort between Sandia National Laboratories and Savannah River Laboratory, MIIT is the largest international cooperative in-situ venture yet undertaken. The objective of the current study is to document the waste form compositions used in the MIIT program and then to examine compositional correlations based on structural considerations, bonding energies, and surface layer formation. These correlations show important similarities between the many different waste glass compositions studied world wide and suggest that these glasses would be expected to perform well and in a similar manner

  12. In situ bioremediation of Hanford groundwater

    International Nuclear Information System (INIS)

    Skeen, R.S.; Roberson, K.R.; Workman, D.J.; Petersen, J.N.; Shouche, M.

    1992-04-01

    Liquid wastes containing radioactive, hazardous, and regulated chemicals have been generated throughout the 40+ years of operations at the US Department of Energy's (DOE) Hanford Site. Some of these wastes were discharged to the soil column and many of the waste components, including nitrate, carbon tetrachloride (CCl 4 ), and several radionuclides, have been detected in the Hanford groundwater. Current DOE policy prohibits the disposal of contaminated liquids directly to the environment, and remediation of existing contaminated groundwaters may be required. In situ bioremediation is one technology currently being developed at Hanford to meet the need for cost effective technologies to clean groundwater contaminated with CCl 4 , nitrate, and other organic and inorganic contaminants. This paper focuses on the latest results of an on going effort to develop effective in situ remediation strategies through the use of predictive simulations

  13. In Situ TEM Creation of Nanowire Devices

    DEFF Research Database (Denmark)

    Alam, Sardar Bilal

    ), which has proved to be a powerful method for visualizing the physical processes involved in the growth of nanowires by the vapour liquid solid (VLS) mechanism, was used to study VLS SiNW contact formation process. Electrical characteristics and effects of surface modification on electrical behavior...... from movies recorded during contact events. It is demonstrated that the geometry of the final contact formed between the nanowire and the silicon surface could be controlled by varying the contact surface temperature and the electrical current through the bridging SiNW. By adjusting the contact surface...... ends, base and tip and its electrical properties were probed in situ TEM. Such SiNW bridges clamped between two cantilevers in situ TEM was an interesting platform for studying the effect of surface modification on SiNWs electrical properties. The effect of surface oxidation was studied...

  14. Ductal Carcinoma In Situ: The Whole Truth.

    Science.gov (United States)

    Parikh, Ujas; Chhor, Chloe M; Mercado, Cecilia L

    2018-02-01

    Ductal carcinoma in situ (DCIS) is a noninvasive malignant breast disease traditionally described as a precursor lesion to invasive breast cancer. With screening mammography, DCIS now accounts for approximately 20% of newly diagnosed cancer cases. DCIS is not well understood because of its heterogeneous nature. Studies have aimed to assess prognostic factors to characterize its risk of invasive potential; however, there still remains a lack of uniformity in workup and treatment. We summarize current knowledge of DCIS and the ongoing controversies.

  15. Carcinoma in situ of the larynx.

    Science.gov (United States)

    Doyle, P J; Flores, A; Douglas, G S

    1977-03-01

    A retrospective study of carcinoma in situ of the larynx at the British Columbia Cancer Institute indicates that radiotherapy, using a tumoricidal dose of Co 60, is the treatment of choice for this condition. Between 1940 and 1972, 43 patients with carcinoma in situ of the vocal cords were seen. A follow-up of five years or more was possible in 28 of these cases. Twenty-two were treated primarily with a tumoricidal dose of radiotherapy. Twenty-one of the 22 were free of disease for at least five years. This study, therefore, shows a five-year cure rate of almost 100 percent for patients treated with radiotherapy. It also brings out two further points regarding carcinoma in situ of the larynx; namely, an apparent increase in its incidence, and the presence of co-existing invasive carcinoma in some cases. We feel that since the incidence of laryngeal carcinoma has not increased, this apparent increase probably represents a greater awareness by both the pathologist and the clinician. We have also achieved more accurate diagnosis since the introduction of routine microlaryngoscopy. The single radiotherapy failure in our series was due to failure to diagnose co-existing invasive carcinoma. This would seem to be the most likely cause of similar failures reported in the literature.

  16. In situ macromolecular crystallography using microbeams

    International Nuclear Information System (INIS)

    Axford, Danny; Owen, Robin L.; Aishima, Jun; Foadi, James; Morgan, Ann W.; Robinson, James I.; Nettleship, Joanne E.; Owens, Raymond J.; Moraes, Isabel; Fry, Elizabeth E.; Grimes, Jonathan M.; Harlos, Karl; Kotecha, Abhay; Ren, Jingshan; Sutton, Geoff; Walter, Thomas S.; Stuart, David I.; Evans, Gwyndaf

    2012-01-01

    A sample environment for mounting crystallization trays has been developed on the microfocus beamline I24 at Diamond Light Source. The technical developments and several case studies are described. Despite significant progress in high-throughput methods in macromolecular crystallography, the production of diffraction-quality crystals remains a major bottleneck. By recording diffraction in situ from crystals in their crystallization plates at room temperature, a number of problems associated with crystal handling and cryoprotection can be side-stepped. Using a dedicated goniometer installed on the microfocus macromolecular crystallography beamline I24 at Diamond Light Source, crystals have been studied in situ with an intense and flexible microfocus beam, allowing weakly diffracting samples to be assessed without a manual crystal-handling step but with good signal to noise, despite the background scatter from the plate. A number of case studies are reported: the structure solution of bovine enterovirus 2, crystallization screening of membrane proteins and complexes, and structure solution from crystallization hits produced via a high-throughput pipeline. These demonstrate the potential for in situ data collection and structure solution with microbeams

  17. In Situ Measurement of Aerosol Extinction

    Science.gov (United States)

    Strawa, Anthony W.; Castaneda, R.; Owano, T. G.; Bear, D.; Gore, Warren J. (Technical Monitor)

    2001-01-01

    Aerosols are important contributors to the radiative forcing in the atmosphere. Much of the uncertainty in our knowledge of climate forcing is due to uncertainties in the radiative forcing due to aerosols as illustrated in the IPCC reports of the last ten years. Improved measurement of aerosol optical properties, therefore, is critical to an improved understanding of atmospheric radiative forcing. Additionally, attempts to reconcile in situ and remote measurements of aerosol radiative properties have generally not been successful. This is due in part to the fact that it has been impossible to measure aerosol extinction in situ in the past. In this presentation we introduce a new instrument that employs the techniques used in cavity ringdown spectroscopy to measure the aerosol extinction and scattering coefficients in situ. A prototype instrument has been designed and tested in the lab and the field. It is capable of measuring aerosol extinction coefficient to 2x10(exp -6) per meter. This prototype instrument is described and results are presented.

  18. A Novel in situ Trigger Combination Method

    International Nuclear Information System (INIS)

    Buzatu, Adrian; Warburton, Andreas; Krumnack, Nils; Yao, Wei-Ming

    2012-01-01

    Searches for rare physics processes using particle detectors in high-luminosity colliding hadronic beam environments require the use of multi-level trigger systems to reject colossal background rates in real time. In analyses like the search for the Higgs boson, there is a need to maximize the signal acceptance by combining multiple different trigger chains when forming the offline data sample. In such statistically limited searches, datasets are often amassed over periods of several years, during which the trigger characteristics evolve and their performance can vary significantly. Reliable production cross-section measurements and upper limits must take into account a detailed understanding of the effective trigger inefficiency for every selected candidate event. We present as an example the complex situation of three trigger chains, based on missing energy and jet energy, to be combined in the context of the search for the Higgs (H) boson produced in association with a W boson at the Collider Detector at Fermilab (CDF). We briefly review the existing techniques for combining triggers, namely the inclusion, division, and exclusion methods. We introduce and describe a novel fourth in situ method whereby, for each candidate event, only the trigger chain with the highest a priori probability of selecting the event is considered. The in situ combination method has advantages of scalability to large numbers of differing trigger chains and of insensitivity to correlations between triggers. We compare the inclusion and in situ methods for signal event yields in the CDF WH search.

  19. Mars Oxygen In-Situ Resource Utilization Experiment

    Data.gov (United States)

    National Aeronautics and Space Administration — The Mars Oxygen In-Situ Resource Utilization Experiment (MOXIE) will be the first in-situ resource utilization (ISRU) technology demonstration on Mars. Competitively...

  20. Instrumented Bit for In-Situ Spectroscopy (IBISS), Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose to build and critically test the Instrumented Bit for In-Situ Spectroscopy (IBISS), a novel system for in-situ, rapid analyses of planetary subsurface...

  1. DEMONSTRATION BULLETIN: IN SITU ELECTROKINETIC EXTRACTION SYSTEM - SANDIA NATIONAL LABORATORIES

    Science.gov (United States)

    Sandia National Laboratories (SNL) has developed an in situ soil remediation system that uses electrokinetic principles to remediate hexavalent chromium-contaminated unsaturated or partially saturated soils. The technology involves the in situ application of direct current to the...

  2. Novel in-situ lamella fabrication technique for in-situ TEM.

    Science.gov (United States)

    Canavan, Megan; Daly, Dermot; Rummel, Andreas; McCarthy, Eoin K; McAuley, Cathal; Nicolosi, Valeria

    2018-03-29

    In-situ transmission electron microscopy is rapidly emerging as the premier technique for characterising materials in a dynamic state on the atomic scale. The most important aspect of in-situ studies is specimen preparation. Specimens must be electron transparent and representative of the material in its operational state, amongst others. Here, a novel fabrication technique for the facile preparation of lamellae for in-situ transmission electron microscopy experimentation using focused ion beam milling is developed. This method involves the use of rotating microgrippers during the lift-out procedure, as opposed to the traditional micromanipulator needle and platinum weld. Using rotating grippers, and a unique adhesive substance, lamellae are mounted onto a MEMS device for in-situ TEM annealing experiments. We demonstrate how this technique can be used to avoid platinum deposition as well as minimising damage to the MEMS device during the thinning process. Our technique is both a cost effective and readily implementable alternative to the current generation of preparation methods for in-situ liquid, electrical, mechanical and thermal experimentation within the TEM as well as traditional cross-sectional lamella preparation. Copyright © 2018 Elsevier B.V. All rights reserved.

  3. Detection of denitrification genes by in situ rolling circle amplification - fluorescence in situ hybridization (in situ RCA-FISH) to link metabolic potential with identity inside bacterial cells

    DEFF Research Database (Denmark)

    Hoshino, Tatsuhiko; Schramm, Andreas

    2010-01-01

    A target-primed in situ rolling circle amplification (in situ RCA) protocol was developed for detection of single-copy genes inside bacterial cells and optimized with Pseudomonas stutzeri, targeting nitrite and nitrous oxide reductase genes (nirS and nosZ). Two padlock probes were designed per gene...... as Candidatus Accumulibacter phosphatis by combining in situ RCA-FISH with 16S rRNA-targeted FISH. While not suitable for quantification because of its low detection frequency, in situ RCA-FISH will allow to link metabolic potential with 16S rRNA (gene)-based identification of single microbial cells....

  4. Isotropy equilibrium of the double woven fabric with cotton face and wool reverse fibrous compositions

    Science.gov (United States)

    Rahnev, I.; Rimini, G.

    2017-10-01

    The equilibrium of the masses and the mechanical properties between the warp and the weft is a determining factor for the quality of the woven fabrics. When the fabric has a multi-layered structure and is designed for protective clothing, the uniform distribution of the elastical resistance acquires a paramount importance for the consumer properties. Isotropy in the sense of absolute equalising of the properties between the base and the weft evaluates the achieved optimum cohesion between the weaving threads and directs the weaving cycle settings. The possible variation of the ratio between the elastic modules of the warp and the weft, depending on the weft spacing and the warp tension, is the basic idea of this article.

  5. Fibrous dysplasia of the frontal sinus: an uncommon cause of frontal lobe abscess.

    Science.gov (United States)

    Aygun, D; Sahin, H

    2004-11-01

    Fibrous dysplasia of the cranial air sinuses is rarely reported in the literature. This is the first report of frontal lobe abscess (FLA) associated with fibrous dysplasia of the frontal sinus (FDFS). A 29-year-old female presented with seizures and acute confusion. Cranial computed tomography (CT) revealed fibrous dysplasia of the left frontal sinus and associated FLA. She was referred to the neurosurgical service and the abscess and dysplastic tissue were removed. Histological examination confirmed fibrous dysplasia. We review the radiological appearance of FDFS with FLA. Clinicians should be aware of the association between these two conditions.

  6. Structure-induced nonlinear viscoelasticity of non-woven fibrous matrices.

    Science.gov (United States)

    Rizvi, Mohd Suhail; Pal, Anupam; Das, Sovan Lal

    2016-12-01

    Fibrous materials are widely utilized as tissue engineering scaffolds for tissue regeneration and other bioengineering applications. The structural as well as mechanical characteristics of the fibrous matrices under static and dynamic mechanical loading conditions influence the response of the cells. In this paper, we study the mechanical response of the non-woven fibrous matrices under oscillatory loading conditions and its dependence on the structural properties of fibrous matrix. We demonstrate that under oscillatory shear and elongation, the fibrous matrices demonstrate nonlinear viscoelasticity at all strain amplitudes. This is contrary to the behavior of other soft polymeric materials for which nonlinearity in the viscoelastic response vanishes for small strains. These observations suggest that despite their prevalence, the measures of linear viscoelasticity (e.g., storage and loss moduli) are inadequate for the general description of the viscoelastic nature of the fibrous materials. It was, however, found that linear viscoelastic nature of fibrous matrices for small amplitudes is restored when a pre-stretch is applied to the fibrous matrix along with oscillatory strains. Further, we also explored the influence of the structural properties of the fibrous matrices (fiber orientation, alignment and curvature) on their viscoelastic nature.

  7. Frontal sinus mucocele: a rare complication of craniofacial fibrous dysplasia.

    Science.gov (United States)

    Atasoy, C; Ustüner, E; Erden, I; Akyar, S

    2001-01-01

    We present plain radiographic, computed tomographic and magnetic resonance imaging (MRI) findings in a 25-year-old female patient with craniofacial fibrous dysplasia (FD). Although FD has a tendency to involve craniofacial bones in a unilateral fashion, the involvement was bilateral and extensive in this case. An additional feature was the presence of a frontal sinus mucocele, presumably due to the involvement of the sinus recess by the dysplastic process. This complication of the craniofacial FD has been reported very infrequently in the literature.

  8. Fibrous dysplasia of inferior turbinate, middle turbinate, and frontal sinus.

    Science.gov (United States)

    Ozcan, K M; Akdogan, O; Gedikli, Y; Ozcan, I; Dere, H; Unal, T

    2007-01-01

    Fibrous dysplasia (FD) is a non-neoplastic fibro-osseous lesion. Paranasal sinus involvement is infrequent. Involvement of the frontal sinus, sphenoid sinus, and middle turbinate is rare, and only sporadic cases have been reported in the literature. Nasal turbinates and especially the inferior turbinate are the least involved bones of the craniofacial region. To the best of our knowledge, only one case with McCune-Albright syndrome had FD of the inferior turbinate. Here, we report a rare case with FD of inferior and middle turbinates and review literature concerning FD of the craniofacial region.

  9. Endoscopic marsupialization of frontoethmoid mucocele with underlying craniofacial fibrous dysplasia.

    Science.gov (United States)

    Wie, Chan-Eun; Hong, Sung-Lyong; Mun, Sue-Jean; Cho, Kyu-Sup

    2015-01-01

    Fibrous dysplasia (FD) is a benign progressive fibro-osseous lesion that is rarely associated with mucocele formation. This complication most probably results from the involvement and subsequent occlusion of the recesses of the sinuses by the dysplastic process. The frontoethmoid mucocele associated with FD represents a rare pathology, but it is important to consider this in the differential diagnosis of patients with proptosis, visual disturbance, and bony fronto-orbital swellings. Here, we describe the first case of frontoethmoid mucocele with underlying craniofacial FD, which was successfully treated by wide marsupialization via the transnasal endoscopic approach.

  10. Fibrous dysplasia with cystic appearance in maxillary sinus.

    Science.gov (United States)

    Muraoka, H; Ishihara, A; Kumagai, J

    2001-01-01

    Fibrous dysplasia (FD) in the paranasal sinuses is uncommon, and its management may be difficult. We report the case of a 25-year-old female with FD exhibiting a cystic appearance in the maxillary sinus. The patient had been complaining of facial swelling for few years. Imagery study showed a cystic lesion and dense bone changes in the maxillary bone. Inferior meatal antrostomy with a nasal endoscope failed to confirm a histological diagnosis. After a 3-year follow-up, the degree of facial swelling was unchanged, and the patient underwent middle meatal antrostomy and was diagnosed with FD.

  11. IMPREGNATED FIBROUS CHEMOSORBENTS OF ACID GASES FOR RESPIRATORY PURPOSE

    Directory of Open Access Journals (Sweden)

    A. A. Ennan

    2017-11-01

    Full Text Available The present review is dedicated to the analysis of scientific works carried out in Physico- Chemical Institute of Environment and Human Protection (Odessa, Ukrainie and directed to the development of import-substituting sorption-filtering materials for respiratory purposes – impregnated fibrous chemisorbents (IFCS of acid gases, which are manufactured using standard equipment, as well as affordable and inexpensive chemical reagents and carriers of domestic origin. The process of chemisorption of sulphur dioxide by hexamethylenetetramine (HMTA modified nonwoven fibrous material resulted acid-catalyzed hydrolysis of HMTA to form aminomethanesulfonic acid and toxic formaldehyde. The IFCS with HMTA carried was recommended to use for air purification only from SiF4, HF, HCl and Cl2. Chemisorption of sulphur dioxide by fibrous materials impregnated by ethanolamines (monoethanolamine, diethanomamine, triethanomamine and N-methylethanolamine and polyethylenepolyamine (PEPA occurs only in the presence of “free” water with formation of “onium” sulphites, hydrosulphites and pyrosulphites. IFCS-PEPA (dynamic activity is 1,38 mmol(SO2/g are not inferior to the protective characteristics of IFCS with Na2CO3, HMTA, ethanolamines and the best foreign ionexchange fibrous chemisorbents brand VION and FIBAN (dynamic activity is 0,263 ÷0,422 mmol(SO2/g under conditions of respirators actual use (jAGM = 60 ÷ 90 %, TAGM = 297 K, VAGM = 2,0 sm/s, СSO2 = 20 ÷ 1000 mg/g3, QPEPA = 3,45 mmol/g. It is recommended to use the condensation products of primary alkylamines with formaldehyde (with large molar masses than the bases, complex compounds of amines with 3d-metals (Ni(II and Cu(II, salts of amine with aminoacids (glycine and polybasic acids (orthophosphoric acid (pKa1 = 2,12 and citric acid (pKa1 = 3,13 for manufacturing of IFCS of acid gases The IFCS with indication of dynamic absorptive capacity “wearing” (IVKS-I was developed.

  12. Solitary fibrous tumor arising in an intrathoracic goiter

    DEFF Research Database (Denmark)

    Larsen, Stine Rosenkilde; Godballe, Christian; Krogdahl, Annelise

    2010-01-01

    . CONCLUSION: The histological appearance and immunohistochemical reaction pattern of SFT is characteristic. The entity should be considered when dealing with a spindle cell lesion in the thyroid gland. All cases of this site of origin reported have had a benign clinical course. As only a small number of cases......BACKGROUND: Solitary fibrous tumor (SFT) is a rare spindle cell tumor most often found in the mediastinal pleura. Nineteen cases of SFT arising in the thyroid gland have been reported. We report a case of SFT of the thyroid gland with immunohistochemical and cytogenetic investigation. SUMMARY: A 58...

  13. A case of solitary fibrous tumor of the kidney

    Directory of Open Access Journals (Sweden)

    H N Naveen

    2011-01-01

    Full Text Available A solitary fibrous tumor (SFT is an unusual spindle cell neoplasm that usually occurs in the pleura but has recently been described in diverse extrapleural sites. Urogenital localization is rare and to our knowledge, only 39 cases of SFT of the kidney have been described. Although SFT of the kidney is extremely rare, this tumor must be included in the differential diagnosis, whenever a renal tumor consisting of mesenchymal elements is encountered. We report a case of a large SFT of the right kidney which was clinically and radiologically thought to be renal cell carcinoma and a final diagnosis of SFT was made only after immunohistochemical study.

  14. The Experiment of Drying Process of the Fibrous Material

    Directory of Open Access Journals (Sweden)

    Jiří RASZKA

    2015-06-01

    Full Text Available The article describes the experiment of water evaporation from fibrous material (cotton. The material is placed in the tube and hot air flows through (process of drying. Temperature of air is measured by thermocouple. The textile represents porous medium with certain amount of water (wet textile. Porous layer makes pressure drop when airflow starts. Properties of air (temperature, relative humidity change during evaporation process. Values of pressure drop, temperature and humidity measured during experiment are used for set up of boundary condition, porous layer and evaporation model in Ansys Fluent 13.

  15. Growth Performance and Behaviour in Grouped Pigs Fed Fibrous Diet

    OpenAIRE

    Bakare, A. G.; Madzimure, J.; Ndou, S. P.; Chimonyo, M.

    2014-01-01

    The objective of the study was to investigate the effect of feeding fibrous diets on growth performance and occurrence of aggressive behaviours in growing pigs. Sixty healthy castrated pigs (initial body weight: 46.7±4.35 kg) were used. A basal diet was diluted with maize cobs to two levels (0 and 160 g/kg dry matter). Behavioural activities were observed using video cameras for three weeks, 8 h/d starting at 0800 h. Pigs subjected to control diet gained more weight compared to pigs receiving...

  16. Metastatic melanoma mimicking solitary fibrous tumor: report of two cases.

    Science.gov (United States)

    Bekers, Elise M; van Engen-van Grunsven, Adriana C H; Groenen, Patricia J T A; Westdorp, Harm; Koornstra, Rutger H T; Bonenkamp, Johannes J; Flucke, Uta; Blokx, Willeke A M

    2014-02-01

    Malignant melanomas are known for their remarkable morphological variation and aberrant immunophenotype with loss of lineage-specific markers, especially in recurrences and metastases. Hot spot mutations in BRAF, NRAS, GNAQ, and GNA11 and mutations in KIT are oncogenic events in melanomas. Therefore, genotyping can be a useful ancillary diagnostic tool. We present one case each of recurrent and metastatic melanoma, both showing histological and immunohistochemical features of solitary fibrous tumor (SFT). Mutational analysis detected BRAF and NRAS mutations in the primary and secondary lesions, respectively. This result confirmed the diagnosis of recurrent/metastastic melanoma.

  17. Growth Performance and Behaviour in Grouped Pigs Fed Fibrous Diet

    Directory of Open Access Journals (Sweden)

    A. G. Bakare

    2014-08-01

    Full Text Available The objective of the study was to investigate the effect of feeding fibrous diets on growth performance and occurrence of aggressive behaviours in growing pigs. Sixty healthy castrated pigs (initial body weight: 46.7±4.35 kg were used. A basal diet was diluted with maize cobs to two levels (0 and 160 g/kg dry matter. Behavioural activities were observed using video cameras for three weeks, 8 h/d starting at 0800 h. Pigs subjected to control diet gained more weight compared to pigs receiving fibrous diet in week 1 (0.47 vs 0.15 kg, respectively and 2 (1.37 vs 1.04, respectively (p<0.05. Average daily gain was not affected by treatment diet in the third week. Pigs on high fibrous spent more time eating, lying down, standing, walking and fighting (p<0.05 compared to pigs on control diet. Time spent eating increased as the weeks progressed whilst time spent lying down decreased. Time of day had an effect on time spent on different behavioural activities exhibited by all pigs on different treatment diet (p<0.05. Inactivity was greatest in 5th (1200 to 1300 h hour of the day for all the pigs on different dietary treatments. Skin lesions appeared the most on neck and shoulder region followed by chest, stomach and hind leg region, and finally head region (p<0.05. Pigs on high fibre diet had more skin lesions in all body regions compared to pigs on control diet (p<0.05. It can be concluded that the high fibrous diet with maize cobs did not affect growth performance and also did not reduce aggressive behaviours. Aggressive behaviours emanated out of frustration when queuing on the feeder. The findings of this study suggest that maize cobs can be included at a level of 160 g/kg in diets of pigs. However, to reduce the level of aggression more feeding space should be provided.

  18. Angiomatoid fibrous histiocytoma in a 25-year-old male

    Directory of Open Access Journals (Sweden)

    David Dingli

    2010-06-01

    Full Text Available Angiomatoid fibrous histiocytoma (AFH is a rare disease that is often misdiagnosed initially. Patients can present with a clinical picture concerning for other diseases, and pathologic review is not always revealing. Molecular diagnostics are increasingly being utilized to detect gene fusions characteristic for AFH. Surgery remains the mainstay of management, and can effectively control local recurrences and metastases. Herein we describe a case report of a 25-year-old gentleman whose presentation was concerning for lymphoma. Subsequently we review of the relevant literature.

  19. Permeability and compression of fibrous porous media generated from dilute suspensions of fiberglass debris during a loss of coolant accident

    International Nuclear Information System (INIS)

    Lee, Saya; Abdulsattar, Suhaeb S.; Vaghetto, Rodolfo; Hassan, Yassin A.

    2015-01-01

    Highlights: • Experimental investigation on fibrous debris buildup was conducted. • Head loss through fibrous media was recorded at different approach velocities. • A head loss model through fibrous media was proposed for high porosity (>0.99). • A compression model of fibrous media was developed. - Abstract: Permeability of fibrous porous media has been studied for decades in various engineering applications, including liquid purifications, air filters, and textiles. In nuclear engineering, fiberglass has been found to be a hazard during a Loss-of-Coolant Accident. The high energy steam jet from a break impinges on surrounding fiberglass insulation materials, producing a large amount of fibrous debris. The fibrous debris is then transported through the reactor containment and reaches the sump strainers. Accumulation of such debris on the surface of the strainers produces a fibrous bed, which is a fibrous porous medium that can undermine reactor core cooling. The present study investigated the buildup of fibrous porous media on two types of perforated plate and the pressure drop through the fibrous porous media without chemical effect. The development of the fibrous bed was visually recorded in order to correlate the pressure drop, the approach velocity, and the thickness of the fibrous porous media. The experimental results were compared to semi-theoretical models and theoretical models proposed by other researchers. Additionally, a compression model was developed to predict the thickness and the local porosity of a fibrous bed as a function of pressure

  20. Biaxial tension of fibrous tissue: using finite element methods to address experimental challenges arising from boundary conditions and anisotropy.

    Science.gov (United States)

    Jacobs, Nathan T; Cortes, Daniel H; Vresilovic, Edward J; Elliott, Dawn M

    2013-02-01

    Planar biaxial tension remains a critical loading modality for fibrous soft tissue and is widely used to characterize tissue mechanical response, evaluate treatments, develop constitutive formulas, and obtain material properties for use in finite element studies. Although the application of tension on all edges of the test specimen represents the in situ environment, there remains a need to address the interpretation of experimental results. Unlike uniaxial tension, in biaxial tension the applied forces at the loading clamps do not transmit fully to the region of interest (ROI), which may lead to improper material characterization if not accounted for. In this study, we reviewed the tensile biaxial literature over the last ten years, noting experimental and analysis challenges. In response to these challenges, we used finite element simulations to quantify load transmission from the clamps to the ROI in biaxial tension and to formulate a correction factor that can be used to determine ROI stresses. Additionally, the impact of sample geometry, material anisotropy, and tissue orientation on the correction factor were determined. Large stress concentrations were evident in both square and cruciform geometries and for all levels of anisotropy. In general, stress concentrations were greater for the square geometry than the cruciform geometry. For both square and cruciform geometries, materials with fibers aligned parallel to the loading axes reduced stress concentrations compared to the isotropic tissue, resulting in more of the applied load being transferred to the ROI. In contrast, fiber-reinforced specimens oriented such that the fibers aligned at an angle to the loading axes produced very large stress concentrations across the clamps and shielding in the ROI. A correction factor technique was introduced that can be used to calculate the stresses in the ROI from the measured experimental loads at the clamps. Application of a correction factor to experimental biaxial

  1. In-situ burning: NIST studies

    International Nuclear Information System (INIS)

    Evans, D.D.

    1992-01-01

    In-situ burning of spilled oil has distinct advantages over other countermeasures. It offers the potential to convert rapidly large quantities of oil into its primary combustion products, carbon dioxide and water, with a small percentage of other unburned and residue byproducts. Because the oil is converted to gaseous products of combustion by burning, the need for physical collection, storage, and transport of recovered fluids is reduced to the few percent of the original spill volume that remains as residue after burning. Burning oil spills produces a visible smoke plume containing smoke particulate and other products of combustion which may persist for many kilometers from the burn. This fact gives rise to public health concerns, related to the chemical content of the smoke plume and the downwind deposition of particulate, which need to be answered. In 1985, a joint Minerals Management Service (MMS) and Environment Canada (EC) in-situ burning research program was begun at the National Institute of Standards and Technology (NIST). This research program was designed to study the burning of large crude oil spills on water and how this burning would affect air quality by quantifying the products of combustion and developing methods to predict the downwind smoke particulate deposition. To understand the important features of in-situ burning, it is necessary to perform both laboratory and mesoscale experiments. Finally, actual burns of spilled oil at sea will be necessary to evaluate the method at the anticipated scale of actual response operations. In this research program there is a continuing interaction between findings from measurements on small fire experiments performed in the controlled laboratory environments of NIST and the Fire Research Institute (FRI) in Japan, and large fire experiments at facilities like the USCG Fire Safety and Test Detachment in Mobile, Alabama where outdoor liquid fuel burns in large pans are possible

  2. The treatment of in situ breast cancer

    Energy Technology Data Exchange (ETDEWEB)

    Fentiman, I.S. (Guy' s Hospital, London (UK). Clinical Oncology Unit)

    1989-01-01

    Carcinoma in situ is the earliest histologically recognisable form of malignancy and as such provides an opportunity to treat the disease in a curative way. The two major variants, ductal carcinoma in situ (DCIS) and lobular carcinoma in situ (LCIS) will be considered separately as the two conditions have divergent natural histories. DCIS is increasing in incidence since microcalcification may be detected radiologically in the screening of asymptomatic women. The extent of microcalcification may not indicate the extent of disease. It has yet to be determined whether there is a difference in behaviour of the tumour forming and the asymptomatic types of DCIS. After a biopsy has shown DCIS there will be residual DCIS at the biopsy site in one-third of patients, and multifocal DCIS in another third. A coexistent infiltrating carcinoma may be present in up to 16%. Due to sampling problems areas of invasion may be missed. Axillary nodal metastases are found in only 1% of patients with histological DCIS. Radical surgery by total or modified mastectomy is almost curative, but 3% of patients will die of metastases. Taking results of uncontrolled trials, local relapse rates are as follows: excision alone 50%, wide excision 30%, wide excision plus radiotherapy 20%. Two prospective trials are underway run by the EORTC and NSABP in which patients with DCIS are treated by wide excision with or without external radiotherapy. LCIS is usually an incidental finding with a bilateral predisposition to subsequent infiltrating carcinomas. Curative procedures such as bilateral mastectomy with reconstruction may represent overtreatment. A systemic rather than local approach would seem appropriate and a trial is now underway run by the EORTC in which patients with histologically confirmed LCIS are randomised to observation alone or to receive tamoxifen 20 mg daily for 5 years. (orig./MG).

  3. Ekstrauterin graviditet med gestagenspiral in situ

    DEFF Research Database (Denmark)

    Mikkelsen, Mette Schou; Bor, Isil Pinar; Højgaard, Astrid Ditte

    2010-01-01

    The levonorgestrel-releasing intrauterine device (IUD) (Mirena) is a frequently used and effective method of contraception, with a Pearl index of 0.1. The ectopic pregnancy rate is 0.02 per 100 woman-years. Special attention is needed in situations where pregnancy is detected with a levonorgestrel......-releasing IUD in situ, because almost two thirds of these pregnancies are ectopic. We describe one of these rare cases of ectopic pregnancy in a woman aged 37 years, who was admitted to hospital with abdominal pain and vaginal bleeding....

  4. In-Situ Wire Damage Detection System

    Science.gov (United States)

    Williams, Martha K. (Inventor); Roberson, Luke B. (Inventor); Tate, Lanetra C. (Inventor); Smith, Trent M. (Inventor); Gibson, Tracy L. (Inventor); Jolley, Scott T. (Inventor); Medelius, Pedro J. (Inventor)

    2014-01-01

    An in-situ system for detecting damage in an electrically conductive wire. The system includes a substrate at least partially covered by a layer of electrically conductive material forming a continuous or non-continuous electrically conductive layer connected to an electrical signal generator adapted to delivering electrical signals to the electrically conductive layer. Data is received and processed to identify damage to the substrate or electrically conductive layer. The electrically conductive material may include metalized carbon fibers, a thin metal coating, a conductive polymer, carbon nanotubes, metal nanoparticles or a combination thereof.

  5. In situ rheology of yeast biofilms.

    Science.gov (United States)

    Brugnoni, Lorena I; Tarifa, María C; Lozano, Jorge E; Genovese, Diego

    2014-01-01

    The aim of the present work was to investigate the in situ rheological behavior of yeast biofilms growing on stainless steel under static and turbulent flow. The species used (Rhodototula mucilaginosa, Candida krusei, Candida kefyr and Candida tropicalis) were isolated from a clarified apple juice industry. The flow conditions impacted biofilm composition over time, with a predominance of C. krusei under static and turbulent flow. Likewise, structural variations occurred, with a tighter appearance under dynamic flow. Under turbulent flow there was an increase of 112 μm in biofilm thickness at 11 weeks (p rheology and contribute to a thin body of knowledge about fungal biofilm formation.

  6. In situ viscometry by optical trapping interferometry

    DEFF Research Database (Denmark)

    Guzmán, C.; Flyvbjerg, Henrik; Köszali, R.

    2008-01-01

    We demonstrate quantitative in situ viscosity measurements by tracking the thermal fluctuations of an optically trapped microsphere subjected to a small oscillatory flow. The measured power spectral density of the sphere's positions displays a characteristic peak at the driving frequency...... of the flow, which is simply proportional to the viscosity, when measured in units of the thermal power spectral density at the same frequency. Measurements are validated on different water-glycerol mixtures, as well as in a glycerol gradient, where no a priori knowledge of the solution is used to determine...

  7. New horizons of genomic in situ hybridization

    Czech Academy of Sciences Publication Activity Database

    Marková, Michaela; Vyskot, Boris

    2009-01-01

    Roč. 126, č. 4 (2009), s. 368-375 ISSN 1424-8581 R&D Projects: GA ČR(CZ) GD204/09/H002; GA ČR(CZ) GA522/09/0083; GA ČR(CZ) GA521/08/0932; GA MŠk(CZ) LC06004 Institutional research plan: CEZ:AV0Z50040507; CEZ:AV0Z50040702 Keywords : evolution * genomic in situ hybridization * phylogenetics Subject RIV: BO - Biophysics Impact factor: 1.729, year: 2009

  8. Computer Aided in situ Cognitive Behavioral Therapy

    DEFF Research Database (Denmark)

    Chongtay, Rocio A.; Hansen, John Paulin; Decker, Lone

    This article describes the development of a system intended to aid the treatment of certain phobic conditions by the use of computer telephony integration (CTI).A phobia is an irrational fear to some situations or things and interferes with the functioning of the individual that suffers from it. ...... presented here is being designed in a modular and scalable fashion. The web-based module can be accessed anywhere any time from a PC connected to the internet and can be used alone or as supplement for a location-based module for in situ gradual exposure therapy....

  9. In Situ Preservation of Historic Spacecraft

    Science.gov (United States)

    Barclay, R.; Brooks, R.

    The loss of the Mir space station is shown to symbolize a new consciousness of the value of space artefacts. The reasons why such artefacts as Mir become historic objects worthy of preservation are examined. Preservation of space vehicles in situ is discussed, with particular reference to safety, monitoring and long term costs. An argument is made for a wider definition for World Heritage designations to include material beyond the surface of the Earth, and for international bodies to assess, monitor and oversee these projects. Such heritage sites are seen as an economic driver for the development of space tourism in the 21st century.

  10. PAEDIATRIC URETERIC CALCULI: IN-SITU EXTRACORPOREAL ...

    African Journals Online (AJOL)

    Il navait ni obstruction urétérale ni infection urinaire. De légères hématuries et coliques transitoires ont été observées après la lithotripsie. Conclusion Chez lenfant, la lithotripsie extra-corporelle in situ est une procédure efficace dans le traitement des calculs urétéraux quelque soit le siège. Il ny a aucune morbidité liée à la ...

  11. Comparison of Chromogenic In Situ Hybridization and Fluorescence In Situ Hybridization for the Evaluation of MDM2 Amplification in Adipocytic Tumors.

    Science.gov (United States)

    Mardekian, Stacey K; Solomides, Charalambos C; Gong, Jerald Z; Peiper, Stephen C; Wang, Zi-Xuan; Bajaj, Renu

    2015-11-01

    Atypical lipomatous tumor/well-differentiated liposarcoma (ALT-WDLPS) and dedifferentiated liposarcoma (DDLPS) are characterized cytogenetically by a 12q13-15 amplification involving the mouse double minute 2 (MDM2) oncogene. Fluorescence in situ hybridization (FISH) is used frequently to detect this amplification and aid with the diagnosis of these entities, which is difficult by morphology alone. Recently, bright-field in situ hybridization techniques such as chromogenic in situ hybridization (CISH) have been introduced for the determination of MDM2 amplification status. The present study compared the results of FISH and CISH for detecting MDM2 amplification in 41 cases of adipocytic tumors. Amplification was defined in both techniques as a MDM2/CEN12 ratio of 2 or greater. Eleven cases showed amplification with both FISH and CISH, and 26 cases showed no amplification with both methods. Two cases had discordant results between CISH and FISH, and two cases were not interpretable by CISH. CISH is advantageous for allowing pathologists to evaluate the histologic and molecular alterations occurring simultaneously in a specimen. Moreover, CISH is found to be more cost- and time-efficient when used with automation, and the signals do not quench over time. CISH technique is a reliable alternative to FISH in the evaluation of adipocytic tumors for MDM2 amplification. © 2014 Wiley Periodicals, Inc.

  12. Inherently safe in situ uranium recovery.

    Energy Technology Data Exchange (ETDEWEB)

    Krumhansl, James Lee; Beauheim, Richard Louis; Brady, Patrick Vane; Arnold, Bill Walter; Kanney, Joseph F.; McKenna, Sean Andrew

    2009-05-01

    Expansion of uranium mining in the United States is a concern to some environmental groups and sovereign Native American Nations. An approach which may alleviate some problems is to develop inherently safe in situ uranium recovery ('ISR') technologies. Current ISR technology relies on chemical extraction of trace levels of uranium from aquifers that, once mined, can still contain dissolved uranium and other trace metals that are a health concern. Existing ISR operations are few in number; however, high uranium prices are driving the industry to consider expanding operations nation-wide. Environmental concerns and enforcement of the new 30 ppb uranium drinking water standard may make opening new mining operations more difficult and costly. Here we propose a technological fix: the development of inherently safe in situ recovery (ISISR) methods. The four central features of an ISISR approach are: (1) New 'green' leachants that break down predictably in the subsurface, leaving uranium, and associated trace metals, in an immobile form; (2) Post-leachant uranium/metals-immobilizing washes that provide a backup decontamination process; (3) An optimized well-field design that increases uranium recovery efficiency and minimizes excursions of contaminated water; and (4) A combined hydrologic/geochemical protocol for designing low-cost post-extraction long-term monitoring. ISISR would bring larger amounts of uranium to the surface, leave fewer toxic metals in the aquifer, and cost less to monitor safely - thus providing a 'win-win-win' solution to all stakeholders.

  13. Enzyme Engineering for In Situ Immobilization.

    Science.gov (United States)

    Rehm, Fabian B H; Chen, Shuxiong; Rehm, Bernd H A

    2016-10-14

    Enzymes are used as biocatalysts in a vast range of industrial applications. Immobilization of enzymes to solid supports or their self-assembly into insoluble particles enhances their applicability by strongly improving properties such as stability in changing environments, re-usability and applicability in continuous biocatalytic processes. The possibility of co-immobilizing various functionally related enzymes involved in multistep synthesis, conversion or degradation reactions enables the design of multifunctional biocatalyst with enhanced performance compared to their soluble counterparts. This review provides a brief overview of up-to-date in vitro immobilization strategies while focusing on recent advances in enzyme engineering towards in situ self-assembly into insoluble particles. In situ self-assembly approaches include the bioengineering of bacteria to abundantly form enzymatically active inclusion bodies such as enzyme inclusions or enzyme-coated polyhydroxyalkanoate granules. These one-step production strategies for immobilized enzymes avoid prefabrication of the carrier as well as chemical cross-linking or attachment to a support material while the controlled oriented display strongly enhances the fraction of accessible catalytic sites and hence functional enzymes.

  14. In situ SU-8 silver nanocomposites

    Directory of Open Access Journals (Sweden)

    Søren V. Fischer

    2015-07-01

    Full Text Available Nanocomposite materials containing metal nanoparticles are of considerable interest in photonics and optoelectronics applications. However, device fabrication of such materials always encounters the challenge of incorporation of preformed nanoparticles into photoresist materials. As a solution to this problem, an easy new method of fabricating silver nanocomposites by an in situ reduction of precursors within the epoxy-based photoresist SU-8 has been developed. AgNO3 dissolved in acetonitrile and mixed with the epoxy-based photoresist SU-8 forms silver nanoparticles primarily during the pre- and post-exposure soft bake steps at 95 °C. A further high-temperature treatment at 300 °C resulted in the formation of densely homogeneously distributed silver nanoparticles in the photoresist matrix. No particle growth or agglomeration of nanoparticles is observed at this point. The reported new in situ silver nanocomposite materials can be spin coated as homogeneous thin films and structured by using UV lithography. A resolution of 5 µm is achieved in the lithographic process. The UV exposure time is found to be independent of the nanoparticle concentration. The fabricated silver nanocomposites exhibit high plasmonic responses suitable for the development of new optoelectronic and optical sensing devices.

  15. Molecular cytogenetics using fluorescence in situ hybridization

    Energy Technology Data Exchange (ETDEWEB)

    Gray, J.W.; Kuo, Wen-Lin; Lucas, J.; Pinkel, D.; Weier, H-U.; Yu, Loh-Chung.

    1990-12-07

    Fluorescence in situ hybridization (FISH) with chromosome-specific probes enables several new areas of cytogenetic investigation by allowing visual determination of the presence and normality of specific genetic sequences in single metaphase or interphase cells. in this approach, termed molecular cytogenetics, the genetic loci to be analyzed are made microscopically visible in single cells using in situ hybridization with nucleic acid probes specific to these loci. To accomplish this, the DNA in the target cells is made single stranded by thermal denaturation and incubated with single-stranded, chemically modified probe under conditions where the probe will anneal only with DNA sequences to which it has high DNA sequence homology. The bound probe is then made visible by treatment with a fluorescent reagent such as fluorescein that binds to the chemical modification carried by the probe. The DNA to which the probe does not bind is made visible by staining with a dye such as propidium iodide that fluoresces at a wavelength different from that of the reagent used for probe visualization. We show in this report that probes are now available that make this technique useful for biological dosimetry, prenatal diagnosis and cancer biology. 31 refs., 3 figs.

  16. Germ cell neoplasia in situ (GCNIS)

    DEFF Research Database (Denmark)

    Berney, Daniel M; Looijenga, Leendert H J; Idrees, Muhammad

    2016-01-01

    The pre-invasive lesion associated with post-pubertal malignant germ cell tumours of the testis was first recognized in the early 1970s and confirmed by a number of observational and follow-up studies. Until this year, this scientific story has been confused by resistance to the entity and disagr......The pre-invasive lesion associated with post-pubertal malignant germ cell tumours of the testis was first recognized in the early 1970s and confirmed by a number of observational and follow-up studies. Until this year, this scientific story has been confused by resistance to the entity...... and disagreement on its name. Initially termed 'carcinoma in situ' (CIS), it has also been known as 'intratubular germ cell neoplasia, unclassified' (IGCNU) and 'testicular intraepithelial neoplasia' (TIN). In this paper, we review the history of discovery and controversy concerning these names and introduce...... the reasoning for uniting behind a new name, endorsed unanimously at the World Health Organization (WHO) consensus classification 2016: germ cell neoplasia in situ (GCNIS)....

  17. Biophotonic in situ sensor for plant leaves

    International Nuclear Information System (INIS)

    Conejo, Elian; Frangi, Jean-Pierre; Rosny, Gilles de

    2010-01-01

    Knowledge of the water concentration of plants can be helpful in several environmental and agricultural domains. There are many methods for the determination of water content in plant leaves; however, most of them give a relative moisture level or an analytical measure after a previous calibration procedure. Even for other biochemical compounds such as dry matter or chlorophyll, the measurement techniques could be destructive. For this reason, a nondestructive method has been developed to measure the biochemical compounds of a plant leaf, using an infrared spectroscopy technique. One important advantage is the simplicity of the device (RAdiometre portatif de Mesure In Situ, RAMIS) and its capability to perform measurements in situ. The prototype is a leaf-clip configuration and is made of LEDs at five wavelengths (656, 721, 843, 937, and 1550 nm), and a silicon/germanium photosensor. To compute the water content of vegetative leaves, the radiative transfer model PROSPECT was implemented. This model can accurately predict spectral transmittances in the 400 nm to 2500 nm spectral region as a function of the principal leaf biochemical contents: water, dry matter, and chlorophyll. Using the transmittance measured by RAMIS into an inversion procedure of PROSPECT: A Model of Leaf Optical Properties Spectra, we are able to compute the values of water contents that show an agreement with the water contents measured directly using dry weight procedures. This method is presented as a possibility to estimate other leaf biochemical compounds using appropriate wavelengths.

  18. Inherently safe in situ uranium recovery

    International Nuclear Information System (INIS)

    Krumhansl, James Lee; Beauheim, Richard Louis; Brady, Patrick Vane; Arnold, Bill Walter; Kanney, Joseph F.; McKenna, Sean Andrew

    2009-01-01

    Expansion of uranium mining in the United States is a concern to some environmental groups and sovereign Native American Nations. An approach which may alleviate some problems is to develop inherently safe in situ uranium recovery ('ISR') technologies. Current ISR technology relies on chemical extraction of trace levels of uranium from aquifers that, once mined, can still contain dissolved uranium and other trace metals that are a health concern. Existing ISR operations are few in number; however, high uranium prices are driving the industry to consider expanding operations nation-wide. Environmental concerns and enforcement of the new 30 ppb uranium drinking water standard may make opening new mining operations more difficult and costly. Here we propose a technological fix: the development of inherently safe in situ recovery (ISISR) methods. The four central features of an ISISR approach are: (1) New 'green' leachants that break down predictably in the subsurface, leaving uranium, and associated trace metals, in an immobile form; (2) Post-leachant uranium/metals-immobilizing washes that provide a backup decontamination process; (3) An optimized well-field design that increases uranium recovery efficiency and minimizes excursions of contaminated water; and (4) A combined hydrologic/geochemical protocol for designing low-cost post-extraction long-term monitoring. ISISR would bring larger amounts of uranium to the surface, leave fewer toxic metals in the aquifer, and cost less to monitor safely - thus providing a 'win-win-win' solution to all stakeholders.

  19. Malignant fibrous histiocytoma of the face: report of a case

    Directory of Open Access Journals (Sweden)

    Bánkfalvi Ágnes

    2007-10-01

    Full Text Available Abstract Background Soft tissue sarcomas in the head and neck region are rare and often present a difficult differential diagnosis. The aim of our presentation is to point out the complexity of the diagnosis, treatment and follow up. Case presentation An eighty-seven year old female patient was referred to our unit with a fast growing brownish lump on the face. Four months beforehand, a benign fibrous histiocytoma (BFH had been removed from the same location by excision biopsy with wide tumour-free resection margins. Excision biopsy of the recurrent lesion revealed a malignant fibrous histiocytoma (MFH. Radical tumour resection was completed by extended parotidectomy and neck dissection; the skin defect was covered by a regional bi-lobed flap. No adjuvant radio- or chemotherapy was administered. Full functional and cosmetic recovery was achieved; follow-up has been uneventful more than two years postoperatively. Discussion Malignant transformation of BFH is extremely rare and if so, extended radical surgery may give a fair chance for a favourable outcome even in patients with advanced age.

  20. Dimensional analysis of membrane distillation flux through fibrous membranes

    Science.gov (United States)

    Mauter, Meagan

    We developed a dimensional-analysis-based empirical modeling method for membrane distillation (MD) flux that is adaptable for novel membrane structures. The method makes fewer simplifying assumptions about membrane pore geometry than existing theoretical (i.e. mechanistic) models, and allows selection of simple, easily-measureable membrane characteristics as structural parameters. Furthermore, the model does not require estimation of membrane surface temperatures; it accounts for convective heat transfer to the membrane surface without iterative fitting of mass and heat transfer equations. The Buckingham-Pi dimensional analysis method is tested for direct contact membrane distillation (DCMD) using non-woven/fibrous structures as the model membrane material. Twelve easily-measured variables to describe DCMD operating conditions, fluid properties, membrane structures, and flux were identified and combined into eight dimensionless parameters. These parameters were regressed using experimentally-collected data for multiple electrospun membrane types and DCMD system conditions, achieving R2 values >95%. We found that vapor flux through isotropic fibrous membranes can be estimated using only membrane thickness, solid fraction, and fiber diameter as structural parameters. Buckingham-Pi model DCMD flux predictions compare favorably with previously-developed empirical and theoretical models, and suggest this simple yet theoretically-grounded empirical modeling method can be used practically for predicting MD vapor flux from membrane structural parameters.

  1. Fibrous Fillers to Manufacture Ultra High Ash/Performance Paper

    Energy Technology Data Exchange (ETDEWEB)

    Dr. VIjay K. Mathur

    2009-04-30

    The paper industry is one of the largest users of energy and emitters of CO2 in the US manufacturing industry. In addition to that, it is facing tremendous financial pressure due to lower cost imports. The fine paper industry has shrunk from 15 million tons per year production to 10 million tons per year in the last 5 years. This has resulted in mill closures and job loses. The AF&PA and the DOE formed a program called Agenda 2020 to help in funding to develop breakthrough technologies to provide help in meeting these challenges. The objectives of this project were to optimize and scale-up Fibrous Fillers technology, ready for commercial deployment and to develop ultra high ash/high performance paper using Fibrous Fillers. The goal was to reduce energy consumption, carbon footprint, and cost of manufacturing paper and related industries. GRI International (GRI) has been able to demonstrate the techno - economic feasibility and economic advantages of using its various products in both handsheets as well as in commercial paper mills. GRI has also been able to develop sophisticated models that demonstrate the effect of combinations of GRI's fillers at multiple filler levels. GRI has also been able to develop, optimize, and successfully scale-up new products for use in commercial paper mills.

  2. Heat Transfer Modeling for Rigid High-Temperature Fibrous Insulation

    Science.gov (United States)

    Daryabeigi, Kamran; Cunnington, George R.; Knutson, Jeffrey R.

    2012-01-01

    Combined radiation and conduction heat transfer through a high-temperature, high-porosity, rigid multiple-fiber fibrous insulation was modeled using a thermal model previously used to model heat transfer in flexible single-fiber fibrous insulation. The rigid insulation studied was alumina enhanced thermal barrier (AETB) at densities between 130 and 260 kilograms per cubic meter. The model consists of using the diffusion approximation for radiation heat transfer, a semi-empirical solid conduction model, and a standard gas conduction model. The relevant parameters needed for the heat transfer model were estimated from steady-state thermal measurements in nitrogen gas at various temperatures and environmental pressures. The heat transfer modeling methodology was evaluated by comparison with standard thermal conductivity measurements, and steady-state thermal measurements in helium and carbon dioxide gases. The heat transfer model is applicable over the temperature range of 300 to 1360 K, pressure range of 0.133 to 101.3 x 10(exp 3) Pa, and over the insulation density range of 130 to 260 kilograms per cubic meter in various gaseous environments.

  3. Special Resins for Stereolithography: In Situ Generation of Silver Nanoparticles

    Directory of Open Access Journals (Sweden)

    Gabriele Taormina

    2018-02-01

    Full Text Available The limited availability of materials with special properties represents one of the main limitations to a wider application of polymer-based additive manufacturing technologies. Filled resins are usually not suitable for vat photo-polymerization techniques such as stereolithography (SLA or digital light processing (DLP due to a strong increment of viscosity derived from the presence of rigid particles within the reactive suspension. In the present paper, the possibility to in situ generate silver nanoparticles (AgNPs starting from a homogeneous liquid system containing a well dispersed silver salt, which is subsequently reduced to metallic silver during stereolithographic process, is reported. The simultaneous photo-induced cross-linking of the acrylic resin produces a filled thermoset resin with thermal-mechanical properties significantly enhanced with respect to the unfilled resin, even at very low AgNPs concentrations. With this approach, the use of silver salts having carbon-carbon double bonds, such as silver acrylate and silver methacrylate, allows the formation of a nanocomposite structure in which the release of by-products is minimized due to the active role of all the reactive components in the three dimensional (3D-printing processes. The synergy, between this nano-technology and the geometrical freedom offered by SLA, could open up a wide spectrum of potential applications for such a material, for example in the field of food packaging and medical and healthcare sectors, considering the well-known antimicrobial effects of silver nanoparticles.

  4. Alternatieve in situ bodemsaneringstechnieken; literatuuronderzoek bij het project "In Situ Biorestauratie" Asten

    NARCIS (Netherlands)

    Scheuter AJ; LBG

    1997-01-01

    In developing in situ remediation most of the focus used to be on techniques using infiltration water to supply oxygen to the location. Later, techniques were developed in which soil was flushed with air to enhance the oxygen availability to microorganisms. The aim of the study reported here was to

  5. Human periosteum cell osteogenic differentiation enhanced by ionic silicon release from porous amorphous silica fibrous scaffolds.

    Science.gov (United States)

    Odatsu, Tetsurou; Azimaie, Taha; Velten, Megan F; Vu, Michael; Lyles, Mark B; Kim, Harry K; Aswath, Pranesh B; Varanasi, Venu G

    2015-08-01

    Current synthetic grafts for bone defect filling in the sinus can support new bone formation but lack the ability to stimulate or enhance osteogenic healing. To promote such healing, osteoblast progenitors such as human periosteum cells must undergo osteogenic differentiation. In this study, we tested the hypothesis that degradation of porous amorphous silica fibrous (PASF) scaffolds can enhance human periosteum cell osteogenic differentiation. Two types of PASF were prepared and evaluated according to their densities (PASF99, PASF98) with 99 and 98% porosity, respectively. Silicon (Si) ions were observed to rapidly release from both scaffolds within 24 h in vitro. PASF99 Si ion release rate was estimated to be nearly double that of PASF98 scaffolds. Mechanical tests revealed a lower compressive strength in PASF99 as compared with PASF98. Osteogenic expression analysis showed that PASF99 scaffolds enhanced the expression of activating transcription factor 4, alkaline phosphatase, and collagen (Col(I)α1, Col(I)α2). Scanning electron microscopy showed cellular and extracellular matrix (ECM) ingress into both scaffolds within 16 days and the formation of Ca-P precipitates within 85 days. In conclusion, this study demonstrated that PASF scaffolds enhance human periosteum cell osteogenic differentiation by releasing ionic Si, and structurally supporting cellular and ECM ingress. © 2015 Wiley Periodicals, Inc.

  6. In-situ Planetary Subsurface Imaging System

    Science.gov (United States)

    Song, W.; Weber, R. C.; Dimech, J. L.; Kedar, S.; Neal, C. R.; Siegler, M.

    2017-12-01

    Geophysical and seismic instruments are considered the most effective tools for studying the detailed global structures of planetary interiors. A planet's interior bears the geochemical markers of its evolutionary history, as well as its present state of activity, which has direct implications to habitability. On Earth, subsurface imaging often involves massive data collection from hundreds to thousands of geophysical sensors (seismic, acoustic, etc) followed by transfer by hard links or wirelessly to a central location for post processing and computing, which will not be possible in planetary environments due to imposed mission constraints on mass, power, and bandwidth. Emerging opportunities for geophysical exploration of the solar system from Venus to the icy Ocean Worlds of Jupiter and Saturn dictate that subsurface imaging of the deep interior will require substantial data reduction and processing in-situ. The Real-time In-situ Subsurface Imaging (RISI) technology is a mesh network that senses and processes geophysical signals. Instead of data collection then post processing, the mesh network performs the distributed data processing and computing in-situ, and generates an evolving 3D subsurface image in real-time that can be transmitted under bandwidth and resource constraints. Seismic imaging algorithms (including traveltime tomography, ambient noise imaging, and microseismic imaging) have been successfully developed and validated using both synthetic and real-world terrestrial seismic data sets. The prototype hardware system has been implemented and can be extended as a general field instrumentation platform tailored specifically for a wide variety of planetary uses, including crustal mapping, ice and ocean structure, and geothermal systems. The team is applying the RISI technology to real off-world seismic datasets. For example, the Lunar Seismic Profiling Experiment (LSPE) deployed during the Apollo 17 Moon mission consisted of four geophone instruments

  7. Evaluation of different measurements for effective thermal conductivity of fibrous materials

    Directory of Open Access Journals (Sweden)

    Tian Ming-Wei

    2014-01-01

    Full Text Available Effective thermal conductivity is generally recognized as the intrinsic factor to reveal the thermal responses of fibrous materials. Here, two typical measurements, the step-wise transient method and the guarded hot plate method, were utilized to identify their feasibility for the effective thermal conductivity of fibrous materials (non-woven fabric and twill fabric with different stacking layers.

  8. Low level hydrogen peroxide generation from a nonwoven fibrous pectin-cellulose blend

    Science.gov (United States)

    Fibrous pectic-cellulose (FPC) (cellulose blended with primary cell wall pectin at 2 percent by weight of pectin) is product made from naturally occurring plant fibers. FPC is a fibrous mixture of polysaccharides with a low percent by weight of pectin-based primary cell wall and lipid components att...

  9. High-surface-area silica nanospheres (KCC-1) with a fibrous morphology

    KAUST Repository

    Polshettiwar, Vivek

    2010-08-02

    Fibrous nanosilica: A new family of high-surface-area silica nanospheres (KCC-1) have been prepared (see picture). KCC-1 features excellent physical properties, including high surface area, unprecedented fibrous surface morphology, high thermal (up to 950 °C) and hydrothermal stabilities, and high mechanical stability. Copyright © 2010 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. Malignant solitary fibrous tumor in anterior mediastinum with pleural metastasis simulating invasive thymoma

    International Nuclear Information System (INIS)

    Kim, Jong Bum; Lee, Ju Won; Kim, Youn Jeong; Kim, Yeo Ju; Lee, Kyung Hee; Chu, Young Chae; Song, Ju Young; Yoon, Yong Han

    2012-01-01

    Malignant solitary fibrous tumor, which arises in the anterior mediastinum, is rare. Its image findings simulate other mediastinal mass, such as malignant lymphoma, malignant thymic epithelial tumor or invasive thymoma. Here, we report a pleural malignant fibrous tumor of a 60 year old man who is presented with a well defined lobulating anterior mediastinal mass with pleural metastasis mimicking invasive thymoma with pleural seeding

  11. Malignant solitary fibrous tumor in anterior mediastinum with pleural metastasis simulating invasive thymoma

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jong Bum; Lee, Ju Won; Kim, Youn Jeong; Kim, Yeo Ju; Lee, Kyung Hee; Chu, Young Chae; Song, Ju Young; Yoon, Yong Han [Inha Univ. School of Medicine/Inha Univ. Hospital, Incheon (Korea, Republic of)

    2012-05-15

    Malignant solitary fibrous tumor, which arises in the anterior mediastinum, is rare. Its image findings simulate other mediastinal mass, such as malignant lymphoma, malignant thymic epithelial tumor or invasive thymoma. Here, we report a pleural malignant fibrous tumor of a 60 year old man who is presented with a well defined lobulating anterior mediastinal mass with pleural metastasis mimicking invasive thymoma with pleural seeding.

  12. Electroosmotic velocity and electric conductivity in a fibrous porous medium in the transverse direction.

    Science.gov (United States)

    Keh, Huan J; Wu, Yi Y

    2011-07-28

    The steady electroosmosis and electric conduction in a fibrous medium constructed by a homogeneous array of parallel, identical, charged, circular cylinders filled with an electrolyte solution is analytically examined. The imposed electric field is constant and normal to the axes of the cylinders. The electric double layer surrounding each dielectric cylinder may have an arbitrary thickness relative to the radius of the cylinder. A unit cell model that allows for the overlap of the double layers of adjacent cylinders is employed. The electrokinetic equations that govern the ionic concentration distributions, the electrostatic potential profile, and the fluid flow field in the electrolyte solution surrounding the charged cylinder in a cylindrical cell are linearized assuming that the system is only slightly distorted from equilibrium. Through the use of a regular perturbation method, these linearized equations are solved with the surface charge density (or zeta potential) of the cylinder as the small perturbation parameter. Analytical expressions for the electroosmotic velocity of the fluid solution and the effective electric conductivity in the array of cylinders are obtained in closed forms as functions of the porosity of the fiber matrix and other characteristics of the porous system. Comparisons of the results of the cell model with different conditions at the outer boundary of the cell are made. The cell model predicts that, under otherwise identical conditions, the electric conductivity in a porous medium composed of an array of parallel cylinders in the transverse direction in general is smaller than that of a suspension of spheres, but there are some exceptions. The effect of interactions among the cylinders or spheres on the effective conductivity can be significant under appropriate conditions. © 2011 American Chemical Society

  13. Mars in Situ Resource Utilization Technology Evaluation

    Science.gov (United States)

    Muscatello, Anthony C.; Santago-Maldonado, Edgardo

    2012-01-01

    We have examined the technologies required to enable Mars In-Situ Resource Utilization (ISRU) because our understanding of Mars resources has changed significantly in the last five years as a result of recent robotic missions to the red planet. Two major developments, (1) confirmation of the presence of near-surface water in the form of ice in very large amounts at high latitudes by the Phoenix Lander and (2) the likely existence of water at lower latitudes in the form of hydrates or ice in the top one meter of the regolith, have the potential to change ISRU technology selection. A brief technology assessment was performed for the most promising Mars atmospheric gas processing techniques: Reverse Water Gas Shift (RWGS) and Methanation (aka Sabatier), as well as an overview of soil processing technology to extract water from Martian soil.

  14. Ductal Carcinoma In Situ of the Breast

    Directory of Open Access Journals (Sweden)

    Richard J. Lee

    2012-01-01

    Full Text Available Ductal carcinoma in situ (DCIS of the breast represents a complex, heterogeneous pathologic condition in which malignant epithelial cells are confined within the ducts of the breast without evidence of invasion. The increased use of screening mammography has led to a significant shift in the diagnosis of DCIS, accounting for approximately 27% of all newly diagnosed cases of breast cancer in 2011, with an overall increase in incidence. As the incidence of DCIS increases, the treatment options continue to evolve. Consistent pathologic evaluation is crucial in optimizing treatment recommendations. Surgical treatment options include breast-conserving surgery (BCS and mastectomy. Postoperative radiation therapy in combination with breast-conserving surgery is considered the standard of care with demonstrated decrease in local recurrence with the addition of radiation therapy. The role of endocrine therapy is currently being evaluated. The optimization of diagnostic imaging, treatment with regard to pathological risk assessment, and the role of partial breast irradiation continue to evolve.

  15. In situ uranium stabilization by microbial metabolites

    International Nuclear Information System (INIS)

    Turick, Charles E.; Knox, Anna S.; Leverette, Chad L.; Kritzas, Yianne G.

    2008-01-01

    Microbial melanin production by autochthonous bacteria was explored in this study as a means to increase U immobilization in U contaminated soil. This article demonstrates the application of bacterial physiology and soil ecology for enhanced U immobilization in order to develop an in situ, U bio-immobilization technology. We have demonstrated microbial production of a metal chelating biopolymer, pyomelanin, in U contaminated soil from the Tims Branch area of the Department of Energy (DOE), Savannah River Site (SRS), South Carolina, as a result of tyrosine amendments. Bacterial densities of pyomelanin producers were >10 6 cells per g wet soil. Pyomelanin demonstrated U complexing and mineral binding capacities at pH 4 and 7. In laboratory studies, in the presence of goethite or illite, pyomelanin enhanced U sequestration by these minerals. Tyrosine amended soils in a field test demonstrated increased U sequestration capacity following pyomelanin production up to 13 months after tyrosine treatments

  16. IN SITU URANIUM STABILIZATION BY MICROBIAL METABOLITES

    Energy Technology Data Exchange (ETDEWEB)

    Turick, C; Anna Knox, A; Chad L Leverette,C; Yianne Kritzas, Y

    2006-11-29

    Soil contaminated with U was the focus of this study in order to develop in-situ, U bio-immobilization technology. We have demonstrated microbial production of a metal chelating biopolymer, pyomelanin, in U contaminated soil from the Tims Branch area of the Department of Energy (DOE) Savannah River Site (SRS) as a result of tyrosine amendments. Bacterial densities of pyomelanin producers were >106 cells/g wet soil. Pyomelanin demonstrated U chelating and mineral binding capacities at pH 4 and 7. In laboratory studies, in the presence of goethite or illite, pyomelanin enhanced U sequestration by these minerals. Tyrosine amended soils in field tests demonstrated increased U sequestration capacity following pyomelanin production up to 13 months after tyrosine treatments.

  17. Underground openings for in situ experiments

    International Nuclear Information System (INIS)

    Wollenberg, H.A.; Korbin, G.

    1982-01-01

    In situ tests include a wide variety of heater experiments with single and multiple arrays at full and reduced scale, block tests, heated room and pillar tests, brine and water migration experiments, permeability tests, fracture hydrology and groundwater chemistry studies, instrumentation development and testing, and other investigations. This article describes the identification of underground openings to accommodate such tests and the concept of a coupled hydrologic-thermomechanical experiment. The hydro/thermomechanical experimental program has five stages: 1) design and fabrication; 2) baseline studies; 3) chamber excavation; 4) test chamber experiment; and 5) data analysis and modeling. From the calculations presented, it was concluded that a large volume of rock (approximately 50 times that in the Stripa full-scale heater test) can be influenced within a reasonable time in the hydro/thermomechanical experiment, thereby bridging the gap between laboratory and repository-sized experiments

  18. In situ vitrification of buried waste sites

    International Nuclear Information System (INIS)

    Shade, J.W.; Thompson, L.E.; Kindle, C.H.

    1991-04-01

    In situ vitrification (ISV) is a remedial technology initially developed to treat soils contaminated with a variety of organics, heavy metals, and/or radioactive materials. Recent tests have indicated the feasibility of applying the process to buried wastes including containers, combustibles, and buried metals. In addition, ISV is being considered for application to the emplacement of barriers and to the vitrification of underground tanks. This report provides a review of some of the recent experiences of applying ISV in engineering-scale and pilot-scale tests to wastes containing organics, the Environmental Protection Agency (EPA) Toxic metals buried in sealed containers, and buried ferrous metals, with emphasis on the characteristics of the vitrified product and adjacent soil. 9 refs., 2 figs., 3 tabs

  19. In situ erosion of cohesive sediment

    International Nuclear Information System (INIS)

    Williamson, H.J.; Ockenden, M.C.

    1993-01-01

    There has been increasing interest in tidal power schemes and the effect of a tidal energy barrage on the environment. A large man-made environmental change, such as a barrage, would be expected to have significant effects on the sediment distribution and stability of an estuary and these effects need to be assessed when considering a tidal barrage project. This report describes the development of apparatus for in-situ measurements of cohesive sediment erosion on inter-tidal mudflats. Development of the prototype field erosion bell and field testing was commissioned on behalf of the Department of Trade and Industry by the Energy Technology Support Unit (ETSU). This later work commenced in August 1991 and was completed in September 1992. (Author)

  20. In situ studies of fracture in solids

    International Nuclear Information System (INIS)

    Narayan, J.; Ohr, S.M.

    1978-01-01

    Electron microscope studies were made of the propagation of microcracks during in situ tensile deformation of stainless steel, molybdenum and magnesium oxide representing ductile, semi-brittle and brittle solids. As the stress is applied, the cracks are initiated at the edge of holes in the thinned foils. The extent of plastic activity around the cracks is measured in terms of the density and the distribution of dislocations and is sensitive to the ductile/brittle nature of the solid. The slip systems of the dislocations are determined by contrast analysis and stereoscopic observation. In stainless steel and magnesium oxide, the dislocations are relatively straight and they lie nearly perpendicular to the direction of the crack propagation, whereas in molybdenum the dislocations are in the form of irregular tangles which are stretched along the direction of the crack propagation. These observations are discussed in terms of the model of Dugdale concerning the formation of plastic zones under uniaxial loading in plane stress conditions

  1. In situ investigations at Avery Island

    International Nuclear Information System (INIS)

    Van Sambeek, L.L.

    1980-01-01

    Descriptions and representative data are given for the in situ investigations being performed in the Avery Island Mine. Sufficient detail is presented such that investigators can judge whether any of the studies being performed would be valuable for their numerical modeling exercises. The basic investigations being performed include heater tests, brine migration experiments, and flatjack tests. The heater tests consist of the emplacement of single simulated waste canisters with different power levels. The bulk thermal and mechanical response is measured of the salt surrounding the emplacement. The brine migration studies involve the measurement of moisture inflow into heated boreholes. The flatjack studies are an investigation of the deformation of the borehole when subjected to controlled boundary conditions of stress and temperature

  2. In situ chemisorption of radiocesium from seawater

    International Nuclear Information System (INIS)

    Mann, D.R.; Casso, S.A.

    1984-01-01

    A novel approach to in situ extraction of Cs radionuclides from seawater is described which offers many advantages over previous methods. Cesium (stable and radioactive) is partially stripped from seawater as it passes in series through a tandem cartridge consisting of twin beds of ion exchange resin impregnated with cupric ferrocyanide. It is demonstrated that, when seawater passes through this cartridge at a constant flow-rate, collection efficiencies of each bed are the same, allowing the calculation of the seawater Cs nuclide concentration. The cartridge is made of inexpensive, readily available, PVC pipe fittings and is easily deployed under various field conditions. Procedures are described for resin preparation and desorption and radiochemical purification of the collected Cs. Thousands of liters of seawater can be stripped of Cs in this way, permitting substantial improvement in the sensitivity of measurement of 134 Cs and 137 Cs. (Auth.)

  3. Support Routines for In Situ Image Processing

    Science.gov (United States)

    Deen, Robert G.; Pariser, Oleg; Yeates, Matthew C.; Lee, Hyun H.; Lorre, Jean

    2013-01-01

    This software consists of a set of application programs that support ground-based image processing for in situ missions. These programs represent a collection of utility routines that perform miscellaneous functions in the context of the ground data system. Each one fulfills some specific need as determined via operational experience. The most unique aspect to these programs is that they are integrated into the large, in situ image processing system via the PIG (Planetary Image Geometry) library. They work directly with space in situ data, understanding the appropriate image meta-data fields and updating them properly. The programs themselves are completely multimission; all mission dependencies are handled by PIG. This suite of programs consists of: (1)marscahv: Generates a linearized, epi-polar aligned image given a stereo pair of images. These images are optimized for 1-D stereo correlations, (2) marscheckcm: Compares the camera model in an image label with one derived via kinematics modeling on the ground, (3) marschkovl: Checks the overlaps between a list of images in order to determine which might be stereo pairs. This is useful for non-traditional stereo images like long-baseline or those from an articulating arm camera, (4) marscoordtrans: Translates mosaic coordinates from one form into another, (5) marsdispcompare: Checks a Left Right stereo disparity image against a Right Left disparity image to ensure they are consistent with each other, (6) marsdispwarp: Takes one image of a stereo pair and warps it through a disparity map to create a synthetic opposite- eye image. For example, a right eye image could be transformed to look like it was taken from the left eye via this program, (7) marsfidfinder: Finds fiducial markers in an image by projecting their approximate location and then using correlation to locate the markers to subpixel accuracy. These fiducial markets are small targets attached to the spacecraft surface. This helps verify, or improve, the

  4. In situ buffer material test, (1)

    International Nuclear Information System (INIS)

    Kumata, Masahiro; Muraoka, Susumu; Shimooka, Kenji; Araki, Kunio; Okamoto, Masamichi.

    1987-10-01

    Buffer materials would be placed between a package and wall rock in a disposal pit in a deep geological formation in the concept for geological disposal of high level radioactive wastes. A bentonite powder produced in our country was compacted in a test hole in-situ into 1.27 kg/cm 3 at 380 m below surface and heated with a electric heater about 882 hours. The value of obtained thermal conductivity of the buffer material was slightly larger than those of the laboratory data. The results of the measurements of the moisture of the buffer material using a Neutron Moisture Meter revealed that the buffer material was dried during the heating and groundwater penetrated from fractures of the wall rock into the buffer material after heating was stopped. (author)

  5. Reverse osmosis membrane allows in situ regeneration

    International Nuclear Information System (INIS)

    Bonhomme, N.; Menjeaud, C.; Poyet, C.

    1989-01-01

    The use of mineral membranes on metallic supports has provided a novel solution to the problem of filtration by the reverse osmosis process. A new reverse osmosis membrane is described which is capable of resisting high operational temperatures (120 0 C), fluctuations in pH(3 to 12) and high pressure (100 bar), as well as significant chlorine concentrations. In addition, the membrane can be regenerated in-situ on the same porous metal support. Numerous membranes can thus be used over the multi-year life of the porous support. Moreover, accidental damage to the membrane is of no great consequence as the membrane itself can be easily replaced. The life of the installation can thus be extended and the overall cost of filtration reduced. The membrane's various applications include water and effluent treatment in the nuclear power industry. (author)

  6. Unannounced in situ simulation of obstetric emergencies

    DEFF Research Database (Denmark)

    Sorensen, Jette Led; Lottrup, Pernille; van der Vleuten, Cees

    2014-01-01

    AIM: To describe how unannounced in situ simulation (ISS) was perceived by healthcare professionals before and after its implementation, and to describe the organisational impact of ISS. STUDY DESIGN: Ten unannounced ISS involving all staff were scheduled March-August 2007. Questionnaire surveys...... on staff perceptions were conducted before (2003-2006) and after (2007-2008) implementation of unannounced ISS. Information from the debriefing sessions following each ISS constituted a proxy measure of the organisational impact of the ISS. RESULTS: Five out of ten of the unannounced ISS scheduled were...... conducted. Twenty-three members of the staff at work on a scheduled day for ISS were randomly selected to participate. Questionnaires before implementation revealed that 137/196 (70%) of staff members agreed or strongly agreed that ISS was a good idea and 52/199 (26%) thought it likely to be stressful...

  7. In-situ trainable intrusion detection system

    Energy Technology Data Exchange (ETDEWEB)

    Symons, Christopher T.; Beaver, Justin M.; Gillen, Rob; Potok, Thomas E.

    2016-11-15

    A computer implemented method detects intrusions using a computer by analyzing network traffic. The method includes a semi-supervised learning module connected to a network node. The learning module uses labeled and unlabeled data to train a semi-supervised machine learning sensor. The method records events that include a feature set made up of unauthorized intrusions and benign computer requests. The method identifies at least some of the benign computer requests that occur during the recording of the events while treating the remainder of the data as unlabeled. The method trains the semi-supervised learning module at the network node in-situ, such that the semi-supervised learning modules may identify malicious traffic without relying on specific rules, signatures, or anomaly detection.

  8. In situ secondary ion mass spectrometry analysis

    Energy Technology Data Exchange (ETDEWEB)

    Groenewold, G.S.; Applehans, A.D.; Ingram, J.C.; Delmore, J.E.; Dahl, D.A.

    1993-01-01

    The direct detection of tributyl phosphate (TBP) on rocks using molecular beam surface analysis [MBSA or in situ secondary ion mass spectrometry (SIMS)] is demonstrated. Quantities as low as 250 ng were detected on basalt and sandstone with little or no sample preparation. Detection of TBP on soil has proven to be more problematic and requires further study. Ethylenediaminetetraacetic acid (EDTA) is more difficult to detect because it is very reactive with surfaces of interest. Nevertheless, it is possible to detect EDTA if the acidity of the surface is controlled. The detection of EDTA-metal complexes is currently an open question, but evidence is presented for the detection of ions arising from a EDTA-lead complex. Carboxylic acids (i.e., citric, ascorbic, malic, succinic, malonic, and oxalic) give characteristic SIM spectra, but their detection on sample surfaces awaits evaluation.

  9. Cryogenic in situ microcompression testing of Sn

    International Nuclear Information System (INIS)

    Lupinacci, A.; Kacher, J.; Eilenberg, A.; Shapiro, A.A.; Hosemann, P.; Minor, A.M.

    2014-01-01

    Characterizing plasticity mechanisms below the ductile-to-brittle transition temperature is traditionally difficult to accomplish in a systematic fashion. Here, we use a new experimental setup to perform in situ cryogenic mechanical testing of pure Sn micropillars at room temperature and at −142 °C. Subsequent electron microscopy characterization of the micropillars shows a clear difference in the deformation mechanisms at room temperature and at cryogenic temperatures. At room temperature, the Sn micropillars deformed through dislocation plasticity, while at −142 °C they exhibited both higher strength and deformation twinning. Two different orientations were tested, a symmetric (1 0 0) orientation and a non-symmetric (4 5 ¯ 1) orientation. The deformation mechanisms were found to be the same for both orientations

  10. In situ SU-8 silver nanocomposites

    DEFF Research Database (Denmark)

    Fischer, Søren Vang; Uthuppu, Basil; Jakobsen, Mogens Havsteen

    2015-01-01

    Nanocomposite materials containing metal nanoparticles are of considerable interest in photonics and optoelectronics applications. However, device fabrication of such materials always encounters the challenge of incorporation of preformed nanoparticles into photoresist materials. As a solution...... to this problem, an easy new method of fabricating silver nanocomposites by an in situ reduction of precursors within the epoxy-based photoresist SU-8 has been developed. AgNO3 dissolved in acetonitrile and mixed with the epoxy-based photoresist SU-8 forms silver nanoparticles primarily during the pre- and post...... silver nanocomposite materials can be spin coated as homogeneous thin films and structured by using UV lithography. A resolution of 5 mu m is achieved in the lithographic process. The UV exposure time is found to be independent of the nanoparticle concentration. The fabricated silver nanocomposites...

  11. Pulping and papermaking properties of the leaf fiber and fibrous residue from Agave tequilana

    Energy Technology Data Exchange (ETDEWEB)

    Kurita, T.; Mitsuhashi, S.; Kanetsuna, H.; Iguchi, M.; Shirota, T.; Trujillo, J.J.; Herrera, T.

    1981-01-01

    The leaves and fibrous residue of A. tequilana had fibriles with parallel orientation and helical arrangement to the fiber axis and contained fibers in average length and width of 1.7 mm and 10.3 mu m and 0.8 mm and 25.5 mu m, respectively. The cell wall in leaves was thicker and narrower than those in fibrous residue, and leaves contained cellulose and lignin lower than fibrous residue did. Alkali sulfite cooking of leaves gave pulp, the yield of which was lower than that from fibrous residue. The H/sub 2/On retention and bulk density of leaf pulps increased rapidly on beating suggesting that an internal fibrillation in pulp occurs easily during beating. The breaking length and burst and tear factors of paper from leaf pulp were higher than those from fibrous residue.

  12. PERFORMANCE CONFIRMATION IN-SITU INSTRUMENTATION

    International Nuclear Information System (INIS)

    N.T. Raczka

    2000-01-01

    The purpose of this document is to identify and analyze the types of in-situ instruments and methods that could be used in support of the data acquisition portion of the Performance Confirmation (PC) program at the potential nuclear waste repository at Yucca Mountain. The PC program will require geomechanical , geophysical, thermal, and hydrologic instrumentation of several kinds. This analysis is being prepared to document the technical issues associated with each type of measurement during the PC period. This analysis utilizes the ''Performance Confirmation Input Criteria'' (CRWMS M andO 1999a) as its starting point. The scope of this analysis is primarily on the period after the start of waste package emplacement and before permanent closure of the repository, a period lasting between 15 and 300 years after last package emplacement (Stroupe 2000, Attachment 1, p. 1). The primary objectives of this analysis are to: (1) Review the design criteria as presented in the ''Performance Confirmation Input Criteria'' (CRWMS M andO 1999a). The scope of this analysis will be limited to the instrumentation related to parameters that require continuous monitoring of the conditions underground. (2) Preliminary identification and listing of the data requirements and parameters as related to the current repository layout in support of PC monitoring. (3) Preliminary identification of methods and instrumentation for the acquisition of the required data. Although the ''Performance Confirmation Input Criteria'' (CRWMS M andO 1999a) defines a broad range of data that must be obtained from a variety of methods, the focus of this analysis is on instrumentation related to the performance of the rock mass and the formation of water in the repository environment, that is obtainable from in-situ observation, testing, and monitoring

  13. In situ permeability testing of rock salt

    International Nuclear Information System (INIS)

    Peterson, E.W.; Lagus, P.L.; Broce, R.D.; Lie, K.

    1981-04-01

    Storage of transuranic (TRU) wastes in bedded salt formations requires a knowledge of the in situ permeability of SENM rock salt. Since assumptions for safety assessments have been made in which these wastes could generate gas pressures on the order of the lithostatic pressure over geologic time scales, the permeability of the surrounding formation becomes an important parameter for determining the manner in which the gases will be contained or dispersed. This report describes the series of tests conducted in the AEC-7 borehole, located near the WIPP site, to determine the in situ gas flow characteristics of the bedded salt. In these tests, compressed air was injected into the borehole and flow into the surrounding formation measured. These measured flow rates were interpreted in terms of formation permeabilities and porosities which were, in turn, used as modeling parameters for the repository response analysis. Two series of field tests were performed. The first series consisted of a number of whole-hole flow tests conducted to provide preliminary design information required for future operation of a guarded straddle packer system capable of measuring permeabilities > or = 0.1 μdarcy. The second series of tests were conducted using the Systems, Science and Software (S-Cubed) designed guarded straddle packer system. In these interval permeability tests, 100-foot lengths of borehole were isolated and the flow characteristics of the surrounding formation examined. In this report, a complete description of the test procedures, instrumentation, and measurement techniques is first given. The analytical/numerical methods used for data interpretation are then presented, followed by results of the interval and permeability tests. (The whole-hole tests are summarized in Appendix A.) Conclusions are presented in the final section

  14. In Situ Field Testing of Processes

    International Nuclear Information System (INIS)

    Wang, J.

    2001-01-01

    The purpose of this Analysis/Model Report (AMR) is to update and document the data and subsequent analyses from ambient field-testing activities performed in underground drifts of the Yucca Mountain Site Characterization Project (YMP). This revision updates data and analyses presented in the initial issue of this AMR. This AMR was developed in accordance with the ''Technical Work Plan for Unsaturated Zone (UZ) Flow and Transport Process Model Report'' and ''Technical Work Plan for UZ Flow, Transport, and Coupled Processes Process Model Report. These activities were performed to investigate in situ flow and transport processes. The evaluations provide the necessary framework to: (1) refine and confirm the conceptual model of matrix and fracture processes in the unsaturated zone (UZ) and (2) analyze the impact of excavation (including use of construction water and effect of ventilation) on the UZ flow and transport processes. This AMR is intended to support revisions to ''Conceptual and Numerical Models for UZ Flow and Transport'' and ''Unsaturated Zone Flow and Transport Model Process Model Report''. In general, the results discussed in this AMR are from studies conducted using a combination or a subset of the following three approaches: (1) air-injection tests, (2) liquid-release tests, and (3) moisture monitoring using in-drift sensors or in-borehole sensors, to evaluate the impact of excavation, ventilation, and construction-water usage on the surrounding rocks. The liquid-release tests and air-injection tests provide an evaluation of in situ fracture flow and the competing processes of matrix imbibition. Only the findings from testing and data not covered in the ''Seepage Calibration Model and Seepage Testing Data'' are analyzed in detail in the AMR

  15. In Situ Field Testing of Processes

    Energy Technology Data Exchange (ETDEWEB)

    J. Wang

    2001-12-14

    The purpose of this Analysis/Model Report (AMR) is to update and document the data and subsequent analyses from ambient field-testing activities performed in underground drifts of the Yucca Mountain Site Characterization Project (YMP). This revision updates data and analyses presented in the initial issue of this AMR. This AMR was developed in accordance with the ''Technical Work Plan for Unsaturated Zone (UZ) Flow and Transport Process Model Report'' and ''Technical Work Plan for UZ Flow, Transport, and Coupled Processes Process Model Report. These activities were performed to investigate in situ flow and transport processes. The evaluations provide the necessary framework to: (1) refine and confirm the conceptual model of matrix and fracture processes in the unsaturated zone (UZ) and (2) analyze the impact of excavation (including use of construction water and effect of ventilation) on the UZ flow and transport processes. This AMR is intended to support revisions to ''Conceptual and Numerical Models for UZ Flow and Transport'' and ''Unsaturated Zone Flow and Transport Model Process Model Report''. In general, the results discussed in this AMR are from studies conducted using a combination or a subset of the following three approaches: (1) air-injection tests, (2) liquid-release tests, and (3) moisture monitoring using in-drift sensors or in-borehole sensors, to evaluate the impact of excavation, ventilation, and construction-water usage on the surrounding rocks. The liquid-release tests and air-injection tests provide an evaluation of in situ fracture flow and the competing processes of matrix imbibition. Only the findings from testing and data not covered in the ''Seepage Calibration Model and Seepage Testing Data'' are analyzed in detail in the AMR.

  16. Diagnostic pitfalls associated with fine-needle aspiration biopsy in a patient with the myxoid variant of monophasic fibrous synovial sarcoma.

    Science.gov (United States)

    Bergman, Simon; Brownlee, Noel A; Geisinger, Kim R; Ward, William G; Pettenati, Mark J; Koty, Patrick; Ellis, Ezra; Beaty, Michael W; Kilpatrick, Scott E

    2006-11-01

    Synovial sarcoma (SS) is one of the most common soft tissue tumors that typically presents in the extremities of young adults, but may occur at any site and affect children during the first decade. Herein we discuss a 12-yr-old male who complained of left foot pain and plantar mass. A fine-needle aspiration biopsy of an 8 cm subcutaneous mass was performed revealing a myxoid spindle cell neoplasm. The cytologic differential diagnosis included a myxoid neurofibroma, neurothekeoma, and a myxoid sarcoma. Subsequent excision of the mass revealed a monophasic fibrous SS with myxoid features. Examination of the tissue by fluorescence in situ hybridization confirmed the presence of characteristic SS SYT gene rearrangement at chromosome 18q11.2. This case underscores that the cytologic distinction of mxyoid spindle cell tumors may be challenging. We report the cytologic features of a myxoid monophasic fibrous SS, and discuss its distinction from other benign and malignant myxoid soft tissue neoplasms. (C) 2006 Wiley-Liss, Inc.

  17. In-situ gelling polymers for biomedical applications

    CERN Document Server

    2015-01-01

    This book presents the research involving in situ gelling polymers and can be used as a guidebook for academics, industrialists and postgraduates interested in this area. This work summaries the academic contributions from the top authorities in the field and explore the fundamental principles of in situ gelling polymeric networks, along with examples of their major applications. This book aims to provide an up-to-date resource of in situ gelling polymer research.

  18. DNA/DNA in situ hybridization with enzyme linked probes

    Energy Technology Data Exchange (ETDEWEB)

    Grillo, S.; Mosher, M.; Charles, P.; Henry, S.; Taub, F.

    1987-05-01

    A non-radioactive in situ nucleic acid hybridization method which requires no antibodies, haptens, avidin or biotin intermediateries is presented. Horseradish peroxidase (HRP) labeled nucleic acid probes are hybridized in situ for 2 hours or less, followed by brief washing of hybridized cells and the direct detection of in situ hybrids with diaminobenzidine (DAB). Application of this method to the detection of Human Papilloma Virus (HPV) in human cells is shown.

  19. Solution (in situ leach) mining of uranium: an overview

    International Nuclear Information System (INIS)

    Kuhaida, A.J. Jr.; Kelly, M.J.

    1978-01-01

    Increases in the demand for and price of uranium have made in-situ mining an attractive alternative to the open-pit and underground U mining methods. Up to 50% of the known ore-bearing sandstone in the western U.S. can be mined using the in-situ mining method. In-situ mining also offers a significant environmental advantage. Restoration of the contaminated groundwater is discussed

  20. Evaluation of polyacrylonitrile electrospun nano-fibrous mats as leukocyte removal filter media.

    Science.gov (United States)

    Pourbaghi, Raha; Zarrebini, Mohammad; Semnani, Dariush; Pourazar, Abbasali; Akbari, Nahid; Shamsfar, Reihaneh

    2017-09-13

    Removal of leukocytes from blood products is the most effective means for elimination of undesirable side effects and prevention of possible reactions in recipients. Micro-fibrous mats are currently used for removal of leukocytes from blood. In this study, samples of electrospun nano-fibrous mats were produced. The performance of the produced electrospun nano-fibrous mats as means of leukocytes removal from fresh whole blood was both evaluated and compared with that of commercially available micro-fibrous mats. In order to produce the samples, polyacrylonitrile (PAN) nano-fibrous mats were made under different electrospinning conditions. Mean fiber diameter, pore characterization and surface roughness of the PAN nano-fibrous mats were determined using image processing technique. In order to evaluate the surface tension of the fabricated mats, water contact angle was measured. The leukocyte removal performance, erythrocytes recovery percent and hemolysis rate of the nano-fibrous mats were compared. The effectiveness of nano-fibrous mats in removing leukocyte was established using both scanning electron microscope and optical microscope. Results showed that for given weight, the fabricated nano-fibrous mats were not only more efficient but also more cost-effective than their commercial counterparts. Results confirmed that changes in mean fiber diameter, the number of layer and weight of each layer in the absence of any chemical reaction or physical surface modification, the fabricated nano-fibrous mats were able to remove 5-log of leukocytes. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2017. © 2017 Wiley Periodicals, Inc.

  1. Double Trouble

    NARCIS (Netherlands)

    Elsaesser, Thomas; Kievit, Robert; Simons, Jan

    1994-01-01

    Double Trouble highlights the career of Dutch scriptwriter and television producer Chiem van Houweninge, well-known for his long-running TV comedy series and as author of episodes for TV detective series. Double Trouble gives Van Houweninge's own views on writing and filming in television prime

  2. Rare giant frontal sinus osteoma mimicking fibrous dysplasia.

    Science.gov (United States)

    Exley, R P; Markey, A; Rutherford, S; Bhalla, R K

    2015-03-01

    To present the first report of a giant frontal sinus osteoma treated by excision and single-stage reconstruction with custom-made titanium cranioplasty and left orbital roof prostheses. A 31-year-old man with a history of chronic frontal sinusitis presented with a deforming, painless, midline forehead swelling of 11 years' duration, which had been treated unsuccessfully in Nigeria. Differential diagnosis included both benign and malignant bony tumours. Computerised tomography revealed a giant bony frontal sinus tumour extending beyond the sinus roof and breaching the left orbit, consistent with fibrous dysplasia. Given the extent of the tumour, open craniectomy was performed for surgical extirpation. Histological analysis identified multiple osteomas. This surgical approach achieved excellent cosmesis, with no evidence of recurrence at 12-month follow up. Forehead swelling may pose diagnostic and management dilemmas for the ENT surgeon; however, effective management is facilitated by a multidisciplinary approach.

  3. Intramuscular myxoma and fibrous dysplasia of bone - Mazabraud's syndrome

    International Nuclear Information System (INIS)

    Court-Payen, M.; Ingemann Jensen, L.; Bjerregaard, B.; Schwarz Lausten, G.; Skjoldbye, B.

    1997-01-01

    We present a case of Mazabroud's syndrome, a rare benign disease, with multiple intramuscular myxomas of the thoracic wall associated with fibrous dysplasia of bone. CT, MR imaging and ultrasonography (US) of the thorax showed 2 well circumscribed homogeneous intramuscular tumors. A US-guided needle biopsy with a large-core needle (2.0 mm) and a fine needle (0.8 mm) showed that the tumors were intramuscular myxomas with no sign of malignancy. 99m Tc bone scintigraphy showed a markedly increased uptake in the right lower skull, and multiple smaller foci. CT of the skull revealed a right-sided unilateral bone thickening of the orbit and the ethomoidal cells, and right-sided exophthalmia. This case history suggests that patients with multiple intramuscular myxomas should be preoperatively examined for osseous lesions. A postoperative follow-up should also be performed to detect other soft-tissue myxomas not as yet clinically detectable, or rare osseous complications. (orig.)

  4. Focal fibrous overgrowths: A case series and review of literature

    Directory of Open Access Journals (Sweden)

    Abhay P Kolte

    2010-01-01

    Full Text Available Intraoral fibrous overgrowths of the soft tissues are relatively common and may be benign reactive or neoplastic lesions. A series of 10 lesions is presented which included pyogenic granuloma, fibroma and peripheral ossifying fibroma. Almost all the lesions occurred in the second and third decades and were present in the anterior segment of the jaws, with a distinct female predilection. Majority of these lesions were asymptomatic and the patients reported for treatment only due to the discomfort during function. Histopathologic examinations were done for diagnosis of these lesions. Surgical excision along with removal of causative irritants remains the treatment of choice. The extent of excision should depend on the severity of the lesion, as some of these lesions have a tendency for recurrence. All the patients in this series were closely followed up for a period of 2 years and showed no signs of recurrence.

  5. Malignant Fibrous Histiocytoma of the Breast: A Case Report

    Directory of Open Access Journals (Sweden)

    Dimosthenis Miliaras

    2012-01-01

    Full Text Available This paper concerns a case of Malignant Fibrous Histiocytoma (MFH of the Breast in a 73-years-old woman. A lump was found in her right breast, measuring 1.7 cm in diameter. Surgical excision followed, and pathology revealed a highly atypical spindle cell tumor. Immunohistochemistry along the histological features, excluded the possibility of carcinoma, malignant phyllodes tumor, or another type of pure sarcoma. There was no history of previous irradiation in the region. MFH is among the rarest types of sarcoma of the breast, and most of the times behaves aggressively. Excision with wide, free-of-tumor margins is the most effective treatment, when feasible.

  6. Electrospun porous structure fibrous film with high oil adsorption capacity.

    Science.gov (United States)

    Wu, Jing; Wang, Nü; Wang, Li; Dong, Hua; Zhao, Yong; Jiang, Lei

    2012-06-27

    A low-cost, high-oil-adsorption film consisting of polystyrene (PS) fibers is fabricated by a facile electrospinning method. Different fiber diameter and porous fiber's surface morphology play roles in oil adsorption capacity and oil/water selectivity. The results showed that oil adsorption capacity of PS oil sorbent film with small diameter and porous surface structure for diesel oil, silicon oil, peanut oil and motor oil were approximate to 7.13, 81.40, 112.30, and 131.63 g/g, respectively. It was higher than normal fibrous sorbent without any porous structure. The thinner porous PS oil sorbent also had excellent oil/water selectivity in the cleanup of oil from water.

  7. A postirradiation, myxoid type, malignant fibrous histiocytoma; A case report

    Energy Technology Data Exchange (ETDEWEB)

    Takeuchi, Masaki; Higuchi, Ryouhei; Ohsige, Kenji; Kouya, Michiko (Tokyo Metropolitan Fuchu Hospital, Tokyo (Japan)); Nozaki, Motohiro

    1993-09-01

    The authors discuss the case of a 59-year-old man who presented a mass in the dorsum of his right foot. He previously had had a hemangioma in this region from birth, and at the age of 10, radiation therapy had been administered to this region because of an ulcer that had developed. Additionally, so as to cover the ulcer, he had been given a free skin graft and a cross-leg flap. Some 50 years after this radiation, he noticed a mass in his foot, and a microscopic examination of a biopsied specimen of this mass revealed it to be a myxoid type, malignant fibrous histiocytoma (MFH). Thus, a below-the-knee amputation was performed. To the best of their knowledge, the authors report that 29 cases of an MFH developing after radiotherapy have been reported in the Japanese literature, and an analysis of these 29 cases is provided and the details of this case are given. (author).

  8. Mishmash Impression Technique for Managing Maxillary Anterior Fibrous Ridge

    Directory of Open Access Journals (Sweden)

    Poonam Kulkarni

    2018-06-01

    Full Text Available Introduction: Flabby or fibrous ridge is one of the consequences of long term wearing of complete dentures. It can develop where hyperplasic soft tissue replaces the alveolar bone and is a common finding, particularly in the upper anterior region of long term denture wearers. Forces exerted during impression making can result in distortion of the mobile tissue unless managed appropriately; such flabby ridges adversely affect support, retention and stability of complete dentures. Many impression techniques have been developed to help overcome this problem. While these vary in the method applied, they are similar in their complexity, are often quite time-consuming to perform and rely on materials not commonly used in contemporary general dental practice. The purpose of this article is to describe an impression technique for flabby ridges usingrubber base impression materials, routinely available in general dental practice.

  9. Idiopathic hypothalamic hypogonadotropic hypogonadism with polyostotic fibrous dysplasia.

    Science.gov (United States)

    Shires, R; Whyte, M P; Avioli, L V

    1979-10-01

    A 22-year-old woman had polyostotic fibrous dysplasia (POFD) and idiopathic hypothalamic hypogonadotropic hypogonadism (isolated gonadotropin deficiency). Recurrent fracture of dysplastic bone during childhood was associated with primary amenorrhea, clinical and laboratory evidence of estrogen deficiency, and subnormal circulating and urinary gonadotropin levels during adolescence. Gonadorelin (luteinizing hormone-releasing hormone) stimulation initially showed a luteinizing hormone (LH) response but absent follicle-stimulating hormone (FSH) response. After three months without estrogen and progesterone and after four days of gonadorelin "priming," a subsequent gonadorelin infusion produced an enhanced LH and FSH response. All other tests of peripheral and trophic hormone levels and pituitary trophic hormone reserves were normal. Whereas POFD is known to occur with sexual precocity and other endocrinopathies, to our knowledge this is the first report of its association with isolated gonadotropin deficiency.

  10. A theoretical analysis of local thermal equilibrium in fibrous materials

    Directory of Open Access Journals (Sweden)

    Tian Mingwei

    2015-01-01

    Full Text Available The internal heat exchange between each phase and the Local Thermal Equilibrium (LTE scenarios in multi-phase fibrous materials are considered in this paper. Based on the two-phase heat transfer model, a criterion is proposed to evaluate the LTE condition, using derived characteristic parameters. Furthermore, the LTE situations in isothermal/adiabatic boundary cases with two different heat sources (constant heat flux and constant temperature are assessed as special transient cases to test the proposed criterion system, and the influence of such different cases on their LTE status are elucidated. In addition, it is demonstrated that even the convective boundary problems can be generally estimated using this approach. Finally, effects on LTE of the material properties (thermal conductivity, volumetric heat capacity of each phase, sample porosity and pore hydraulic radius are investigated, illustrated and discussed in our study.

  11. Solitary fibrous tumor of the liver: a case report

    Directory of Open Access Journals (Sweden)

    Ying Li-Xiong

    2011-03-01

    Full Text Available Abstract Hepatic solitary fibrous tumor (SFT is a rare tumor originating from the mesenchyme. Here we report a new case of SFT in the liver and review the clinical presentation, radiological and operative findings, diagnosis, treatment, and outcome. The patient was a 59-year-old man who presented with progressive fatigue for 3 months and an abdominal mass for 3 days. On laboratory tests, no abnormality was detected except that abdominal ultrasonography revealed a 9.0 × 6.2 cm hypoechogenic mass in the left lobe of the liver. A computed tomographic scan confirmed a hypodense lesion in the left lobe of the liver. The patient underwent left hepatectomy. SFT was diagnosed on the basis of histopathological findings. The patient was free from all symptoms and had no signs of local recurrence after 24 months' follow up.

  12. Giant Solitary Fibrous Tumor of the Parotid Gland

    Directory of Open Access Journals (Sweden)

    Octavian Chis

    2014-01-01

    Full Text Available Solitary fibrous tumors (SFTs are rare tumors that are mostly found arising from the pleura. SFT of the parotid gland is a rare tumor; only a few cases have been described in the literature. SFTs are benign in most cases. Clinically, SFTs usually manifest as well circumscribed, slow-growing, smooth, and painless masses. CT-Scan and MRI are the most sensitive imaging procedures used. The treatment of choice is complete surgical excision of the lesion. Since recurrence and metastasis can take place after several years, a lifelong clinical and imaging regular follow-up is compulsory. In this paper, we describe the diagnostic and therapeutic challenges of the up-to-now biggest parotid SFT. The clinical presentation, surgical management, and pathological and immunohistochemistry findings are described.

  13. Pentazocine-induced leg ulcers and fibrous papules

    Directory of Open Access Journals (Sweden)

    De Dipankar

    2007-01-01

    Full Text Available We herein describe a case of 55-year-old farmer, who presented with chronic non-healing ulcers over both shins of 4 years duration. Intravenous drug abuse was suspected due to inability to find any venous access and all peripheral veins being found thickened and fibrosed. There were multiple atrophic scars in linear distribution in all limbs as well as in both groins. In addition there were multiple discrete fibrous papules in linear distribution on both hands, which were more obvious on the left side. The patient denied abusing intravenous drugs. However, his relatives confirmed that he abused pentazocine for almost one year before his chronic pain in abdomen was treated by appendicectomy. With subsequent counseling, it was found that he continued to abuse pentazocine at times even after surgery leading to the non-healing of ulcers.

  14. Case report 490: Monostotic fibrous dysplasia of the pubis

    Energy Technology Data Exchange (ETDEWEB)

    Buckwalter, J.A.; El-Khoury, G.; Bonfiglio, M.M.; Platz, C.C.

    1988-07-01

    An expansile lesion of the superior pubic ramus in a 32 year old man was discovered incidentally when roentgenograms were obtained to assess the possibility of fracture following an automobile accident. A technetium scan showed increased uptake in the lesion and computed tomography showed expansion of the superior pubic ramus and extension of the lesion from the pubic symphysis to the acetabulum. A needle aspirate of the lesion consisted of blood and giant cells. Based on the appearance of the lesion and the needle aspirate a preliminary diagnosis of giant cell tumor or aneurysmal bone cyst was made. When examined at the time of operation, the lesion was found to be firm and gritty. It was removed and the remaining bone surfaces curetted. Histological examination showed a pattern most consistent with fibrous dysplasia. The pubic ramus healed uneventfully.

  15. Solitary fibrous tumor of the pleura: 3 case reports

    Directory of Open Access Journals (Sweden)

    Elias Amorim

    2015-06-01

    Full Text Available Summary Introduction: solitary fibrous tumor of the pleura (SFTP is a rare tumor arising from mesenchymatous cells in submesothelial pleural tissue which, unlike mesothelioma, is not related to asbestos or smoking. Methods: report of four patients who underwent surgical treatment for giant SFTP and review of the pertinent literature. Results: of the four patients operated, two presented symptoms including cough, chest pain and feeling of compression, whereas the other two subjects were asymptomatic. All patients underwent complete surgical resection by wide posterolateral thoracotomy, and surgical specimens removed with minimum bleeding. None of the cases required complementary lobectomy or segmentectomy. All tumors were histologically benign. Conclusion: complete resection of the lesion is the treatment of choice in all SFTP cases. Prognosis of the benign lesion is excellent, although close follow-up is necessary. In the rarer, more aggressive forms, treatment may be complemented by adjunctive chemotherapy or radiotherapy, the benefits of which have yet to be confirmed.

  16. Polyelectrolyte-complex nanostructured fibrous scaffolds for tissue engineering

    International Nuclear Information System (INIS)

    Verma, Devendra; Katti, Kalpana S.; Katti, Dinesh R.

    2009-01-01

    In the current work, polyelectrolyte complex (PEC) fibrous scaffolds for tissue engineering have been synthesized and a mechanism of their formation has been investigated. The scaffolds are synthesized using polygalacturonic acid and chitosan using the freeze drying methodology. Highly interconnected pores of sizes in the range of 5-20 μm are observed in the scaffolds. The thickness of the fibers was found to be in the range of 1-2 μm. Individual fibers have a nanogranular structure as observed using AFM imaging. In these scaffolds, PEC nanoparticles assemble together at the interface of ice crystals during freeze drying process. Further investigation shows that the freezing temperature and concentration have a remarkable effect on structure of scaffolds. Biocompatibility studies show that scaffold containing chitosan, polygalacturonic acid and hydroxyapatite promotes cell adhesion and proliferation. On the other hand, cells on scaffolds fabricated without hydroxyapatite nanoparticles showed poor adhesion.

  17. Hypoglyceamia in a Patient with a Solitary Fibrous Tumour

    Directory of Open Access Journals (Sweden)

    Andrew Okpe

    2016-04-01

    Full Text Available Objective: To illustrate an unusual mechanism causing hypoglycaemia. Material and methods: A 76-year-old man presented with episodes of agitation and confusion and was resuscitated with oral glucose gel when found to be hypoglycaemic. Results: A CT scan for an abdominal mass confirmed a solitary fibrous tumour (SFT. The sarcoma multidisciplinary team suggested conservative management. The patient's episodic hypoglycaemia was managed with diet modification including corn-based starch, scheduled snacks and dexamethasone. Glucose levels were within normal range at discharge from hospital. The patient was referred to the palliative care team for follow-up. Conclusion: SFTs causing non-islet cell tumour hypoglycaemia are difficult to treat.

  18. Primary Malignant Fibrous Histiocytoma of the Lung: A Case Report

    Directory of Open Access Journals (Sweden)

    Chuan-Sheng Wang

    2003-08-01

    Full Text Available Malignant fibrous histiocytoma (MFH is the most common soft tissue sarcoma in adults. However, primary MFH of the lung is rare, with only a few cases reported in the literature. Here, we report the case of an 86-year-old male who was admitted to our hospital with the chief complaint of exertional dyspnea and poor appetite. Chest roentgenography revealed a 9 × 15 cm, pleural-based opacity in the left lower lobe. Chest computerized tomography disclosed a well-defined mass with heterogeneous density in the left lower lung field. The diagnosis of MFH was confirmed by thoracoscopic lung biopsy and pathologic examination. Supportive care was given because of extreme old age and poor performance status (the patient's Karnofsky performance status was 30. The patient died from respiratory failure 2 months later.

  19. Bioactive Nano-fibrous Scaffold for Vascularized Craniofacial Bone Regeneration

    DEFF Research Database (Denmark)

    Prabha, Rahul Damodaran; Kraft, David Christian Evar; Harkness, Linda

    2018-01-01

    There has been a growing demand for bone grafts for correction of bone defects in complicated fractures or tumors in the craniofacial region. Soft flexible membrane like material that could be inserted into defect by less invasive approaches; promote osteoconductivity and act as a barrier to soft...... tissue in growth while promoting bone formation is an attractive option for this region. Electrospinning has recently emerged as one of the most promising techniques for fabrication of extracellular matrix (ECM) like nano-fibrous scaffolds that can serve as a template for bone formation. To overcome...... and biocompatibility properties of the new scaffold material. Our results indicate PVA-PCL-HAB scaffolds support attachment and growth of stromal stem cells; (human bone marrow skeletal (mesenchymal) stem cells (hMSC) and dental pulp stem cells (DPSC)). In addition, the scaffold supported in vitro osteogenic...

  20. Determination of physical properties of fibrous thermal insulation

    Directory of Open Access Journals (Sweden)

    Jeandel G.

    2012-10-01

    Full Text Available The objective of this study is to characterize both experimentally and theoretically, conductive and radiative heat transfer within polyester batting. This material is derived from recycled bottles (PET with fibres of constant diameters. Two other mineral and plant fibrous insulation materials, (glass wool and hemp wool are also characterized for comparative purposes. To determine the overall thermophysical properties of the tested materials, heat flux measurement are carried out using a device developed in house. The radiative properties of the material are determined by an inverse method based on measurements of transmittance and reflectance using a FTIR spectrometer and by solving the equation of radiative heat transfer. These measures are compared to results of numerical simulations.

  1. In Situ Mass Spectrometric Monitoring of the Dynamic Electrochemical Process at the Electrode–Electrolyte Interface: a SIMS Approach

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Zhaoying; Zhang, Yanyan; Liu, Bingwen; Wu, Kui; Thevuthasan, Suntharampillai; Baer, Donald R.; Zhu, Zihua; Yu, Xiao-Ying; Wang, Fuyi

    2017-01-03

    The in situ molecular characterization of reaction intermediates and products at electrode-electrolyte interfaces is central to mechanistic studies of complex electrochemical processes, yet a great challenge. The coupling of electrochemistry (EC) and mass spectrometry (MS) has seen rapid development and found broad applicability in tackling challenges in analytical and bioanalytical chemistry. However, few truly in situ and real-time EC-MS studies have been reported at electrode-electrolyte interfaces. An innovative EC-MS coupling method named in situ liquid secondary ion mass spectrometry (SIMS) was recently developed by combining SIMS with a vacuum compatible microfluidic electrochemical device. Using this novel capability we report the first in situ elucidation of the electro-oxidation mechanism of a biologically significant organic compound, ascorbic acid (AA), at the electrode-electrolyte interface. The short-lived radical intermediate was successfully captured, which had not been detected directly before. Moreover, we demonstrated the power of this new technique in real-time monitoring of the formation and dynamic evolution of electrical double layers at the electrode-electrolyte interface. This work suggests further promising applications of in situ liquid SIMS in studying more complex chemical and biological events at the electrode-electrolyte interface.

  2. Ion assisted deposition processes: in situ control; Ionengestuetzte Beschichtungsprozesse in situ kontrollieren

    Energy Technology Data Exchange (ETDEWEB)

    Ehlers, H.; Gross, T.; Lappschies, M.; Ristau, D. [Laser Zentrum Hannover e.V. (Germany). Abteilung Laserkomponeneten, Gruppe Prozessentwicklung

    2004-12-01

    Ion assisted deposition processes for optical precision components exhibit a high potential, in particular in the near and mid infrared spectral region. The presented results demonstrate the important criterion of a minimized water adsorption in the thin film structures by measurements of the optical losses in the wavelength range around 3 {mu}m as well as by the determination of the spectral stability of the optics. Furthermore, the employment of an in situ monitor, which allows wide-band transmission measurements directly at the product, provides an extensive database for the process analysis and development. Thus, additional information about the growth behavior, the vacuum-to-air-shift, and about layer inhomogeneities is available. The combination of the in situ monitor with the coating plant control results in an automated process system, which allows a precise determination of the layer thickness and represents a basis for the rapid prototyping of complex layer systems. In contrast to standard monitor strategies, test coatings and calibration factors are not necessary. With the presented combination of the stable ion assisted deposition process and the in situ monitor, the production of demanding NIR/MIR multilayer systems with high reproducibility could be automated. (orig.)

  3. IN-SITU TRITIUM BETA DETECTOR

    Energy Technology Data Exchange (ETDEWEB)

    J.W. Berthold; L.A. Jeffers

    1998-04-15

    The objectives of this three-phase project were to design, develop, and demonstrate a monitoring system capable of detecting and quantifying tritium in situ in ground and surface waters, and in water from effluent lines prior to discharge into public waterways. The tritium detection system design is based on measurement of the low energy beta radiation from the radioactive decay of tritium using a special form of scintillating optical fiber directly in contact with the water to be measured. The system consists of the immersible sensor module containing the optical fiber, and an electronics package, connected by an umbilical cable. The system can be permanently installed for routine water monitoring in wells or process or effluent lines, or can be moved from one location to another for survey use. The electronics will read out tritium activity directly in units of pico Curies per liter, with straightforward calibration. In Phase 1 of the project, we characterized the sensitivity of fluor-doped plastic optical fiber to tritium beta radiation. In addition, we characterized the performance of photomultiplier tubes needed for the system. In parallel with this work, we defined the functional requirements, target specifications, and system configuration for an in situ tritium beta detector that would use the fluor-doped fibers as primary sensors of tritium concentration in water. The major conclusions from the characterization work are: A polystyrene optical fiber with fluor dopant concentration of 2% gave best performance. This fiber had the highest dopant concentration of any fibers tested. Stability may be a problem. The fibers exposed to a 22-day soak in 120 F water experienced a 10x reduction in sensitivity. It is not known whether this was due to the build up of a deposit (a potentially reversible effect) or an irreversible process such as leaching of the scintillating dye. Based on the results achieved, it is premature to initiate Phase 2 and commit to a prototype

  4. IN-SITU TRITIUM BETA DETECTOR

    International Nuclear Information System (INIS)

    Berthold, J.W.; Jeffers, L.A.

    1998-01-01

    The objectives of this three-phase project were to design, develop, and demonstrate a monitoring system capable of detecting and quantifying tritium in situ in ground and surface waters, and in water from effluent lines prior to discharge into public waterways. The tritium detection system design is based on measurement of the low energy beta radiation from the radioactive decay of tritium using a special form of scintillating optical fiber directly in contact with the water to be measured. The system consists of the immersible sensor module containing the optical fiber, and an electronics package, connected by an umbilical cable. The system can be permanently installed for routine water monitoring in wells or process or effluent lines, or can be moved from one location to another for survey use. The electronics will read out tritium activity directly in units of pico Curies per liter, with straightforward calibration. In Phase 1 of the project, we characterized the sensitivity of fluor-doped plastic optical fiber to tritium beta radiation. In addition, we characterized the performance of photomultiplier tubes needed for the system. In parallel with this work, we defined the functional requirements, target specifications, and system configuration for an in situ tritium beta detector that would use the fluor-doped fibers as primary sensors of tritium concentration in water. The major conclusions from the characterization work are: A polystyrene optical fiber with fluor dopant concentration of 2% gave best performance. This fiber had the highest dopant concentration of any fibers tested. Stability may be a problem. The fibers exposed to a 22-day soak in 120 F water experienced a 10x reduction in sensitivity. It is not known whether this was due to the build up of a deposit (a potentially reversible effect) or an irreversible process such as leaching of the scintillating dye. Based on the results achieved, it is premature to initiate Phase 2 and commit to a prototype

  5. Accessing the biocompatibility of layered double hydroxide by intramuscular implantation: histological and microcirculation evaluation

    OpenAIRE

    Cunha, Vanessa Roberta Rodrigues; de Souza, Rodrigo Barbosa; da Fonseca Martins, Ana Maria Cristina Rebello Pinto; Koh, Ivan Hong Jun; Constantino, Vera Regina Leopoldo

    2016-01-01

    Biocompatibility of layered double hydroxides (LDHs), also known as hydrotalcite-like materials or double metal hydroxides, was investigated by in vivo assays via intramuscular tablets implantation in rat abdominal wall. The tablets were composed by chloride ions intercalated into LDH of magnesium/aluminum (Mg2Al-Cl) and zinc/aluminum (Zn2Al-Cl). The antigenicity and tissue integration capacity of LDHs were assessed histologically after 7 and 28 days post-implantation. No fibrous capsule near...

  6. Novel two-step method to form silk fibroin fibrous hydrogel

    International Nuclear Information System (INIS)

    Ming, Jinfa; Li, Mengmeng; Han, Yuhui; Chen, Ying; Li, Han; Zuo, Baoqi; Pan, Fukui

    2016-01-01

    Hydrogels prepared by silk fibroin solution have been studied. However, mimicking the nanofibrous structures of extracellular matrix for fabricating biomaterials remains a challenge. Here, a novel two-step method was applied to prepare fibrous hydrogels using regenerated silk fibroin solution containing nanofibrils in a range of tens to hundreds of nanometers. When the gelation process of silk solution occurred, it showed a top-down type gel within 30 min. After gelation, silk fibroin fibrous hydrogels exhibited nanofiber network morphology with β-sheet structure. Moreover, the compressive stress and modulus of fibrous hydrogels were 31.9 ± 2.6 and 2.8 ± 0.8 kPa, respectively, which was formed using 2.0 wt.% concentration solutions. In addition, fibrous hydrogels supported BMSCs attachment and proliferation over 12 days. This study provides important insight in the in vitro processing of silk fibroin into useful new materials. - Highlights: • SF fibrous hydrogel was prepared by a novel two-step method. • SF solution containing nanofibrils in a range of tens to hundreds of nanometers was prepared. • Gelation process was top-down type gel with several minutes. • SF fibrous hydrogels exhibited nanofiber network morphology with β-sheet structure. • Fibrous hydrogels had higher compressive stresses superior to porous hydrogels.

  7. Determinants of impaired quality of life in patients with fibrous dysplasia.

    Science.gov (United States)

    Majoor, Bas C J; Andela, Cornelie D; Bruggemann, Jens; van de Sande, Michiel A J; Kaptein, Ad A; Hamdy, Neveen A T; Dijkstra, P D Sander; Appelman-Dijkstra, Natasha M

    2017-04-27

    Fibrous dysplasia is a rare bone disorder, commonly associated with pain, deformity and fractures, which may significantly impact on quality of life. In this study we evaluate quality of life in patients with fibrous dysplasia using the Short Form-36 and the Brief Pain Inventory questionnaires. Data were compared with those of the general Dutch population. Out of 138 patients from a cohort of 255 patients with fibrous dysplasia that were sent questionnaires assessing quality of life and pain, the response rate was 70.3%, with 97 patients, predominantly female (65%), completing the questionnaires. Monostotic fibrous dysplasia was predominant (n = 62, 64%). Fibrous dysplasia patients had significantly lower quality of life outcome scores than the general Dutch population for all tested domains of the Short Form-36 except for the "Mental health" and the "Role emotional" domains. More severe forms of fibrous dysplasia, had the more severe Short-Form-36 quality of life outcomes, but there was no significant difference in Brief Pain Inventory domains between different subtypes of fibrous dysplasia. Quality of life was lower in patients with higher disease burden, as reflected by high skeletal burden scores (p = 0.003) and high levels of P1NP (p = 0.002). We demonstrate impairments in all domains of quality of life, except for 'Mental health' and 'Role emotional' domains, across the wide spectrum of fibrous dysplasia including its milder forms. We identified high skeletal burden scores, reflecting disease severity, as the most consistent predictor of impaired quality of life. Our findings hold significant clinical implications as they draw attention to the clinically unmet need to address quality of life issues in the management of patients with all subtypes of fibrous dysplasia, including its milder forms.

  8. In-situ soil carbon analysis using inelastic neutron scattering

    Science.gov (United States)

    In situ soil carbon analysis using inelastic neutron scattering (INS) is based on the emission of 4.43 MeV gamma rays from carbon nuclei excited by fast neutrons. This in-situ method has excellent potential for easily measuring soil carbon since it does not require soil core sampling and processing ...

  9. Development of an in situ polymeric hydrogel implant of ...

    African Journals Online (AJOL)

    Purpose: To prepare and characterize in situ gel-forming implants of methylprednisolone for the treatment of spinal cord injuries. Methods: In situ hydrogels of methylprednisolone were prepared by dispersing polylactide glycolic acid. (PLGA) polymer and methylprednisolone in N-methyl-pyrrolidone solvent, and subsequent ...

  10. An overview of in situ waste treatment technologies

    International Nuclear Information System (INIS)

    Walker, S.; Hyde, R.A.; Piper, R.B.; Roy, M.W.

    1992-01-01

    In situ technologies are becoming an attractive remedial alternative for eliminating environmental problems. In situ treatments typically reduce risks and costs associated with retrieving, packaging, and storing or disposing-waste and are generally preferred over ex situ treatments. Each in situ technology has specific applications, and, in order to provide the most economical and practical solution to a waste problem, these applications must be understood. This paper presents an overview of thirty different in situ remedial technologies for buried wastes or contaminated soil areas. The objective of this paper is to familiarize those involved in waste remediation activities with available and emerging in situ technologies so that they may consider these options in the remediation of hazardous and/or radioactive waste sites. Several types of in situ technologies are discussed, including biological treatments, containment technologies, physical/chemical treatments, solidification/stabilization technologies, and thermal treatments. Each category of in situ technology is briefly examined in this paper. Specific treatments belonging to these categories are also reviewed. Much of the information on in situ treatment technologies in this paper was obtained directly from vendors and universities and this information has not been verified

  11. paediatric ureteric calculi: in-situ extracorporeal shock wave lithotripsy

    African Journals Online (AJOL)

    Objective To evaluate prospectively the efficacy of in-situ extracorporeal shock wave lithotripsy (ESWL) in the treatment of ureteric calculi in the paediatric age group. Patients and Methods Twenty children (aged 2.2 16 years) with 22 ureteric stones were evaluated and treated with in-situ ESWL using the Dornier S lithotripter ...

  12. Development of an in situ polymeric hydrogel implant of ...

    African Journals Online (AJOL)

    Purpose: To prepare and characterize in situ gel-forming implants of methylprednisolone for the treatment of spinal cord injuries. Methods: In situ hydrogels of methylprednisolone were prepared by dispersing polylactide glycolic acid (PLGA) polymer and methylprednisolone in N-methyl-pyrrolidone solvent, and subsequent ...

  13. CGS and In Situ Measurements in Gävle 1999

    DEFF Research Database (Denmark)

    Aage, Helle Karina; Korsbech, Uffe C C; Bargholz, Kim

    1999-01-01

    Calibration of CGS-equipment.In situ measuremts with HPGe-detector (and dose rate meter)in Gävle Sweden as part of the Nordic exercise RESUME99.......Calibration of CGS-equipment.In situ measuremts with HPGe-detector (and dose rate meter)in Gävle Sweden as part of the Nordic exercise RESUME99....

  14. Comparison of in situ nutrient disappearance of alternative maize ...

    African Journals Online (AJOL)

    Two maize milling by-products (maize gluten feed; MGF and maize by-product feed; MBPF) were compared with shelled maize (SM) and soyabean meal (SBM) for their in situ nutrient disappearance. In situ experiments were conducted in two rumen fistulated Holstein cows to evaluate dry matter (DM), crude protein (CP), ...

  15. Some implications of in situ uranium mining technology development

    Energy Technology Data Exchange (ETDEWEB)

    Cowan, C.E.; Parkhurst, M.A.; Cole, R.J.; Keller, D.; Mellinger, P.J.; Wallace, R.W.

    1980-09-01

    A technology assessment was initiated in March 1979 of the in-situ uranium mining technology. This report explores the impediments to development and deployment of this technology and evaluates the environmental impacts of a generic in-situ facility. The report is divided into the following sections: introduction, technology description, physical environment, institutional and socioeconomic environment, impact assessment, impediments, and conclusions. (DLC)

  16. Melanoma in situ with in-transit metastases

    Directory of Open Access Journals (Sweden)

    Joachim Mikkelsen

    2017-03-01

    This case shows what is generally considered impossible – metastasizing melanoma in situ. The finding had severe implications for the patient, and raises the question of whether to intensify follow-up or the extent of surgery in patients with melanoma in situ, especially when regression is present.

  17. Some implications of in situ uranium mining technology development

    International Nuclear Information System (INIS)

    Cowan, C.E.; Parkhurst, M.A.; Cole, R.J.; Keller, D.; Mellinger, P.J.; Wallace, R.W.

    1980-09-01

    A technology assessment was initiated in March 1979 of the in-situ uranium mining technology. This report explores the impediments to development and deployment of this technology and evaluates the environmental impacts of a generic in-situ facility. The report is divided into the following sections: introduction, technology description, physical environment, institutional and socioeconomic environment, impact assessment, impediments, and conclusions

  18. In Situ Immobilization of Selenium in Sediment

    Energy Technology Data Exchange (ETDEWEB)

    Moore, Robert C. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Stewart, Thomas Austin [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-09-01

    This project focused on the use of a sorbent, carbonated apatite, to immobilize selenium in the environment. It is know that apatite will sorb selenium and based on the mechanism of sorption it is theorized that carbonated apatite will be more effective that pure apatite. Immobilization of selenium in the environment is through the use of a sorbent in a permeable reactive barrier (PRB). A PRB can be constructed by trenching and backfill with the sorbent or in the case of apatite as the sorbent formed in situ using the apatite forming solution of Moore (2003, 2004). There is very little data on selenium sorption by carbonated apatite in the literature. Therefore, in this work, the basic sorptive properties of carbonated apatite were investigated. Carbonated apatite was synthesized by a precipitation method and characterized. Batch selenium kinetic and equilibrium experiments were performed. The results indicate the carbonated apatite contained 9.4% carbonate and uptake of selenium as selenite was rapid; 5 hours for complete uptake of selenium vs. more than 100 hours for pure hydroxyapatite reported in the literature. Additionally, the carbonated apatite exhibited significantly higher distribution coefficients in equilibrium experiments than pure apatite under similar experimental conditions. The next phase of this work will be to seek additional funds to continue the research with the goal of eventually demonstrating the technology in a field application.

  19. Innovative technologies for in-situ remediation

    International Nuclear Information System (INIS)

    Ragaini, R.; Aines, R.; Knapp, R.; Matthews, S.; Yow, J.

    1994-06-01

    LLNL is developing several innovative remediation technologies as long-term improvements to the current pump and treat approaches to cleaning up contaminated soils and groundwater. These technologies include dynamic underground stripping, in-situ microbial filters, and remediation using bremsstrahlung radiation. Concentrated underground organic contaminant plumes are one of the most prevalent groundwater contamination sources. The solvent or fuel can percolate deep into the earth, often into water-bearing regions. Collecting as a separate, liquid organic phase called dense non-aqueous-phase liquids (DNAPLs), or light NAPLs (LNAPLs), these contaminants provide a source term that continuously compromises surrounding groundwater. This type of spill is one of the most difficult environmental problems to remediate. Attempts to remove such material requires a huge amount of water which must be washed through the system to clean it, requiring decades. Traditional pump and treat approaches have not been successful. LLNL has developed several innovative technologies to clean up NAPL contamination. Detailed descriptions of these technologies are given

  20. Backfilling of deposition tunnels, in situ alternative

    International Nuclear Information System (INIS)

    Keto, P.

    2007-04-01

    The backfilling process described in this report is based on in situ compaction of a mixture of bentonite and ballast (30:70) into the deposition tunnel. This method has been tested in practice in various field tests by SKB, most recently in the Prototype repository test performed at Aespoe HRL. The backfill mixture is prepared above ground and transported to the repository level with a tank truck. The material is compacted into layers with an inclination of 35 deg C and a thickness of approximately 20 cm. The compaction is performed with a vibratory plate attached to a boom of an excavator. In order to keep up with the required canister installation rate determined for the Finnish repository, at least 13 layers need to be compacted daily. This means working in 2-3 shifts on the working days that are available for backfilling operations. The dry densities achieved in field tests for the wall/roof section of the backfill have been insufficient compared with the dry density criteria set for the backfill. In theory, it may be possible to reach dry densities that fulfil the criteria, although with a relatively small safety margin. Another open issue is whether the mixture of bentonite and ballast has sufficient self-healing ability to seal-off erosion channels after the tunnels have been closed and the backfill has reached full saturation. (orig.)

  1. Incomplete copolymer degradation of in situ chemotherapy.

    Science.gov (United States)

    Bourdillon, Pierre; Boissenot, Tanguy; Goldwirt, Lauriane; Nicolas, Julien; Apra, Caroline; Carpentier, Alexandre

    2018-02-17

    In situ carmustine wafers containing 1,3-bis(2-chloroethyl)-1-nitrosourea (BCNU) are commonly used for the treatment of recurrent glioblastoma to overcome the brain-blood barrier. In theory, this chemotherapy diffuses into the adjacent parenchyma and the excipient degrades in maximum 8 weeks but no clinical data confirms this evolution, because patients are rarely operated again. A 75-year-old patient was operated twice for recurrent glioblastoma, and a carmustine wafer was implanted during the second surgery. Eleven months later, a third surgery was performed, revealing unexpected incomplete degradation of the wafer. 1H-Nuclear Magnetic Resonance was performed to compare this wafer to pure BCNU and to an unused copolymer wafer. In the used wafer, peaks corresponding to hydrophobic units of the excipient were no longer noticeable, whereas peaks of the hydrophilic units and traces of BCNU were still present. These surprising results could be related to the formation of a hydrophobic membrane around the wafer, thus interfering with the expected diffusion and degradation processes. The clinical benefit of carmustine wafers in addition to the standard radio-chemotherapy remains limited, and in vivo behavior of this treatment is not completely elucidated yet. We found that the wafer may remain after several months. Alternative strategies to deal with the blood-brain barrier, such as drug-loaded liposomes or ultrasound-opening, must be explored to offer larger drug diffusion or allow repetitive delivery.

  2. Latrogenic keratectasia following laser in situ keratomileusis.

    Science.gov (United States)

    Spadea, Leopoldo; Palmieri, Giampiero; Mosca, Luigi; Fasciani, Romina; Balestrazzi, Emilio

    2002-01-01

    To evaluate keratectasia after laser in situ keratomileusis (LASIK) for high myopia. A 49-year-old male patient with myopia of -23.50 D in both eyes underwent LASIK with a Summit Technology Apex Plus excimer laser. A Moria manually-guided MDSC microkeratome was used. Preoperative corneal topography in both eyes did not reveal underlying or fruste form of keratoconus. Four months after LASIK, a progressive keratectasia occurred in right eye and after 12 months, in left eye. Corneal transplantation was performed in both eyes. Histological and ultrastructural examinations were performed on one corneal button. The analysis showed regular stromal morphology and cellularity, with no sign of inflammation. The morphometric analysis showed an overall thickness of 334 microm, with a flap of 262 microm and a stromal residual bed of 72 microm, in the center of the button. A LASIK corneal flap made with a planned 120-microm plate turned out histologically to be approximately 260 microm thick, in an eye with a refractive correction of -23.50 D. The excessive flap thickness and excessive ablation produced progressive keratectasia requiring a penetrating keratoplasty.

  3. Cubesat in-situ degradation detector (CIDD)

    Science.gov (United States)

    Rievers, Benny; Milke, Alexander; Salden, Daniel

    2015-07-01

    The design of the thermal control and management system (TCS) is a central task in satellite design. In order to evaluate and dimensionize the properties of the TCS, material parameters specifying the conductive and radiative properties of the different TCS components have to be known including their respective variations within the mission lifetime. In particular the thermo-optical properties of the outer surfaces including critical TCS components such as radiators and thermal insulation are subject to degradation caused by interaction with the space environment. The evaluation of these material parameters by means of ground testing is a time-consuming and expensive endeavor. Long-term in-situ measurements on board the ISS or large satellites not only realize a better implementation of the influence of the space environment but also imply high costs. Motivated by this we propose the utilization of low-cost nano-satellite systems to realize material tests within space at a considerably reduced cost. We present a nanosat-scale degradation sensor concept which realizes low power consumption and data rates compatible with nanosat boundaries at UHF radio. By means of a predefined measurement and messaging cycle temperature curves are measured and evaluated on ground to extract the change of absorptivity and emissivity over mission lifetime.

  4. PROSCARA Inc. in-situ burning summary paper

    International Nuclear Information System (INIS)

    1994-06-01

    In-situ burning as a viable response tactic in the event of an oil spill, was discussed. Key factors which influence a decision to use burning were enumerated, including a detailed analysis of the environmental effects of in-situ burning on soils. The critical parameters were time, soil heating and extent of oil penetration into the soil. It was noted that on water-saturated and frozen soil in-situ burning had no adverse effects. The advantages and disadvantages of in-situ burning vis-a-vis conventional mechanical recovery were discussed. Factors that do, and factors that do not support decisions in favour of in-situ burning were listed. 4 refs., 2 tabs

  5. In situ ARXPS characterization of tantalum based barrier films

    International Nuclear Information System (INIS)

    Gerlich, Lukas

    2012-01-01

    As a consequence of device shrinking the resistivity of the widely used TaN/Ta double barrier layer becomes an increasingly important parameter for device speed beyond the 32 nm technology node. In this study the optimization of the deposition of TaN/Ta stacks was performed in such a way that tantalum nitride layer thickness is minimized and tantalum grows in the favorable conducting alpha-phase. In the first part of the study in situ ARXPS was used to investigate the growth of different tantalum nitride layers on SiO 2 and SiOCH as a function of deposition time, nitrogen flow and deposition power. In the second part the crystalline phase of 20 nm thick tantalum layers deposited on top of the same series of tantalum nitride layers characterized in the growth study was analyzed. The main findings are the appearance of tantalum carbide and tantalum silicide as interface species for the deposition on SiOCH and only tantalum silicide for the deposition on SiO 2 . So alpha-tantalum grows preferably on tantalum carbide and nitrogen rich intermediate layers whereas silicide at the interface promotes the growth of beta-tantalum. To verify these findings two additional modifications of the interface were studied. A lower bias power for a deposition of tantalum nitride on SiO 2 was used to confirm the role of tantalum silicide and a thermal treatment of a thin tantalum layer on SiOCH was applied to confirm the role of tantalum carbide. Finally, the contact resistance in via chains on patterned wafers for four selected processes showed the same trends as the sheet resistance of the corresponding barrier films on blanket wafer experiments.

  6. Fibrous Myopathy as a Complication of Repeated Intramuscular Injections for Chronic Headache

    Directory of Open Access Journals (Sweden)

    R Burnham

    2006-01-01

    Full Text Available Two cases of fibrous myopathy associated with repeated, long-term intramuscular injections for treatment of chronic temporomandibular joint pain and chronic headache, respectively, are described. Both patients developed severe, function-limiting contractures in upper and lower extremity muscles used as injection sites. In one of the cases, the contractures were painful. Electrophysiological testing, magnetic resonance imaging and muscle biopsy results were all consistent with myopathy and replacement of skeletal muscle with noncontractile fibrous tissue. These cases are presented to increase awareness of fibrous myopathy and to promote surveillance for this serious potential complication of long-term intramuscular injections in chronic headache and other pain patients.

  7. Comparison of MRA source image and IVUS for evaluating fibrous cap of carotid plaque

    International Nuclear Information System (INIS)

    Sakamoto, Masahiko; Taoka, Toshiaki; Nakagawa, Hiroyuki; Myochin, Kaoru; Yoshikawa, Kimihiko; Takayama, Katsutoshi; Wada, Takeshi; Iwasaki, Satoru; Fukuzumi, Akio

    2007-01-01

    The purpose is evaluating the usefulness of three-dimensional (3D) time of flight (TOF) MR angiography (MRA) source image for investigating fibrous cap of carotid plaque. The percentage of fibrous cap defect of 17 carotid stenotic lesions was calculated on both MRA source images and intravascular ultrasound (IVUS) images. Five lesions were correlated, but 9 had slight gap (10-20%) and 3 had moderate gap (30-40%). There was significant correlation (P<;0.01, r=0.721) by the Pearson's correlation coefficient. MRA source image can evaluate fibrous cap of carotid plaque. (author)

  8. A large infiltrating fibrous hamartoma of infancy in the abdominal wall with rare associated tuberous sclerosis

    Energy Technology Data Exchange (ETDEWEB)

    Han, Hye-Jeong; Lim, Gye-Yeon [The Catholic University of Korea, Department of Radiology, St. Mary' s Hospital, Seoul (Korea); You, Chang-Young [The Catholic University of Korea, Department of Pathology, St. Mary' s Hospital, Seoul (Korea)

    2009-07-15

    Tuberous sclerosis is a complex autosomal-dominant neurocutaneous syndrome characterized by hamartomatous malformations of fibrous and connective tissues in various organs. Although various histologic types of soft-tissue masses can occur with tuberous sclerosis, we present a unique case of fibrous hamartoma of infancy presenting as large infiltrating cutaneous and subcutaneous masses in the abdominal wall in a 4-year-old boy with tuberous sclerosis. Although the co-occurrence of tuberous sclerosis and fibrous hamartoma of infancy is very rare, it should be considered in the differential diagnosis of subcutaneous soft-tissue masses found in children with tuberous sclerosis. (orig.)

  9. Congenital costo-vertebral fibrous band and congenital kyphoscoliosis: a previously unreported combination.

    Science.gov (United States)

    Eid, Tony; Ghostine, Bachir; Kreichaty, Gaby; Daher, Paul; Ghanem, Ismat

    2013-05-01

    Congenital kyphoscoliosis (CKS) results from abnormal vertebral chondrification. Congenital fibrous bands occur in several locations with variable impact on vertebral development. We report a previously unreported case of a female infant with CKS presenting with an L2 hypoplastic vertebra and a costo-vertebral fibrous band extending to the skin in the form of a dimple. We also describe the therapeutic approach, consisting of surgical excision of the fibrous band and postoperative fulltime bracing, with a 7-year follow-up. We recommend a high index of suspicion in any unusual presentation of CKS and insist on case by case management in such cases.

  10. A flexible microrobotic platform for handling microscale specimens of fibrous materials for microscopic studies.

    Science.gov (United States)

    Saketi, P; Von Essen, M; Mikczinski, M; Heinemann, S; Fatikow, S; Kallio, P

    2012-11-01

    One of the most challenging issues faced in handling specimens for microscopy, is avoiding artefacts and structural changes in the samples caused by human errors. In addition, specimen handling is a laborious and time-consuming task and requires skilful and experienced personnel. This paper introduces a flexible microrobotic platform for the handling of microscale specimens of fibrous materials for various microscopic studies such as scanning electron microscopy and nanotomography. The platform is capable of handling various fibres with diameters ranging from 10 to 1000 μm and lengths of 100 μm-15 mm, and mounting them on different types of specimen holders without damaging them. This tele-operated microrobotic platform minimizes human interaction with the samples, which is one of the main sources contributory to introducing artefacts into the specimens. The platform also grants a higher throughput and an improved success rate of specimen handling, when compared to the manual processes. The operator does not need extensive experience of microscale manipulation and only a short training period is sufficient to operate the platform. The requirement of easy configurability for various samples and sample holders is typical in the research and development of materials in this field. Therefore, one of the main criteria for the design of the microrobotic platform was the ability to adapt the platform to different specimen handling methods required for microscopic studies. To demonstrate this, three experiments are carried out using the microrobotic platform. In the first experiment, individual paper fibres are mounted successfully on scanning electron microscopy specimen holders for the in situ scanning electron microscopy diagonal compression test of paper fibres. The performance of the microrobotic platform is compared with a skilled laboratory worker performing the same experiment. In the second experiment, a strand of human hair and an individual paper fibre bond

  11. Meurigite, a new fibrous iron phosphate resembling kidwellite

    Science.gov (United States)

    Birch, W.D.; Pring, A.; Self, P.G.; Gibbs, R.B.; Keck, E.; Jensen, M.C.; Foord, E.E.

    1996-01-01

    Meurigite is a new hydrated potassium iron phosphate related to kidwellite and with structural similarities to other late-stage fibrous ferric phosphate species. It has been found at four localities so far - the Santa Rita mine, New Mexico, U.S.A.; the Hagendorf-Sud pegmatite in Bavaria, Germany; granite pegmatite veins at Wycheproof, Victoria. Australia; and at the Gold Quarry Mine, Nevada, U.S.A. The Santa Rita mine is the designated type locality. Meurigite occurs as tabular, elongated crystals forming spherical and hemispherical clusters and drusy coatings. The colour ranges from creamy white to pale yellow and yellowish brown. At the type locality, the hemispheres may reach 2 mm across, but the maximum diameter reached in the other occurrences is usually less than 0.5 mm. A wide variety of secondary phosphate minerals accompanies meurigite at each locality, with dufrenite, cyrilovite. beraunite, rockbridgeite and leucophosphite amongst the most common. Vanadates and uranates occur with meurigite at the Gold Quarry mine. Electron microprobe analysis and separate determination of H2O and CO2 on meurigite from the type locality gave a composition for which several empirical formulae could be calculated. The preferred formula, obtained on the basis of 35 oxygen atoms, is (K0.85Na0.03)??0.88(Fe7.013+Al0.16Cu0.02)??7.19 (PO4)5.11(CO3)0.20(OH) 6.7??7-7.25H2O, which simplifies to KFe73+(PO4)5(OH) 7??8H2O. Qualitative analyses only were obtained for meurigite from the other localities, due to the softness and openness of the aggregates. Because of the fibrous nature of meurigite, it was not possible to determine the crystal structure, hence the exact stoichiometry remains uncertain. The lustre of meurigite varies from vitreous to waxy for the Santa Rita mine mineral, to silky for the more open sprays and internal surfaces elsewhere. The streak is very pale yellow to cream and the estimated Mohs hardness is about 3. Cleavage is perfect on {001] and fragments from the

  12. FIBROUS MONOLITH WEAR RESISTANT COMPONENTS FOR THE MINING INDUSTRY

    Energy Technology Data Exchange (ETDEWEB)

    Mark J. Rigali

    2001-10-01

    Published mechanical and thermal properties data on a variety of materials was gathered, with focus on materials that have potential with respect to developing wear resistant and damage tolerant composite for mining industry applications. Preliminary core materials of interest include but are not limited to: Diamond, Tungsten Carbide and Cemented Tungsten Carbides, Carbides of Boron, Silicon, Titanium and Aluminum, Diboride of Titanium and Aluminum, Nitrides of Aluminum, Silicon, Titanium, and Boron, Aluminum Oxide, Tungsten, Titanium, Iron, Cobalt and Metal Alloys. Preliminary boundary materials of interest include but are not limited to: W metal, WC-Co, W-Co, WFeNi, and Mo metal and alloys. Several FM test coupons were fabricated with various compositions using the above listed materials. These coupons were consolidated to varying degrees by uniaxial hot pressing, then cut and ground to expose the FM cell structure. One promising system, WC-Co core and WFeNi boundary, was consolidated to 97% of theoretical density, and demonstrates excellent hardness. Data on standard mechanical tests was gathered, and tests will begin on the consolidated test coupons during the upcoming reporting period. The program statements of work for ACR Inc. and its subcontractors, as well as the final contract negotiations, were finalized during the current reporting period. The program start date was February 22nd, 2001. In addition to the current subcontractors, Kennametal Inc., a major manufacturer of cutting tools and wear resistant tooling for the mining industry, expressed considerable interest in ACR's Fibrous Monolith composites for both machine and mining applications. At the request of Kennametal, ARC Inc fabricated and delivered several Fibrous Monolith coupons and components for testing and evaluation in the mining and machine tool applications. Additional samples of Diamond/Tungsten Carbide-6%Cobalt Fibrous Monolith were fabricated and delivered for testing Kennametal

  13. Polyhomologation based on in situ generated Boron-thexyl-silaboracyclic initiating sites: a novel strategy towards the synthesis of polyethylene-based complex architectures

    KAUST Repository

    Zhang, Zhen

    2015-04-10

    A novel strategy, based on the in situ generated Boron-thexyl-silaboracyclic initiating sites for the polyhomologation of dimethylsulfoxonium methylide, has been developed for the synthesis of complex polyethylene-based architectures. As examples, the synthesis of a 4-arm polyethylene star, three (polystyrene)(polyethylene)2 3-miktoarm stars and a PE-branched double graft copolymers are given.

  14. IN SITU MEASUREMENT OF BEDROCK EROSION

    Directory of Open Access Journals (Sweden)

    D. H. Rieke-Zapp

    2012-07-01

    Full Text Available While long term erosion rates of bedrock material may be estimated by dating methods, current day erosion rates are – if at all available – based on rough estimates or on point measurements. Precise quantification of short term erosion rates are required to improve our understanding of short term processes, for input in landscape evolution models, as well as for studying the mechanics and efficiency of different erosion processes in varying geomorphological settings. Typical current day erosion rates in the European Alps range from sub-millimetre to several millimetres per year depending on the dominant erosion processes. The level of surveying accuracy required for recurring sub-millimetre to millimetre measurements in the field is demanding. A novel surveying setup for in-situ measurement of bedrock erosion was tested recently in three different locations in Switzerland. Natural bedrock was investigated in the Gornera gorge close to Zermatt. Further on, bedrock samples were installed in exposed locations in the Erlenbach research watershed close to Einsiedeln, and in the Illgraben debris flow channel, located in the Canton Schwyz and Valais, respectively. A twofold measurement approach was chosen for all locations. For the first setup control points providing an absolute reference frame for recurrent measurements were embedded close to the area of interest. Close range photogrammetry was applied to measure surface changes on the bedrock samples. The precision for surface measurements in the field was 0.1 mm (1 σ and thus suitable for the application. The equipment needed for the surveys can easily be carried to the field. At one field site a structured light scanner was used along with the photogrammetric setup. Although the current generation of structured light scanners appeared less suitable for field application, data acquisition was much faster and checking the data for completeness in the field was straight forward. The latest

  15. Ductal carcinoma in situ: a challenging disease

    Directory of Open Access Journals (Sweden)

    Sevilay Altintas

    2011-12-01

    Full Text Available Ductal carcinoma in situ (DCIS represents a heterogenous group of lesions with variable malignant potential. Although it is clearly pre-invasive, not all lesions progress to an invasive malignant disease. The significant increase in the frequency of diagnosis is the result of both widespread use of screening mammography and better recognition among pathologists. Treatment is controversial, but for several decades total mastectomy has been considered as the appropriate treatment. The tendency to be less aggressive in terms of surgery has followed the pattern of events observed in the treatment of invasive breast carcinomas. More recently, it has become clear that breastconserving procedures could be applied and selected on the basis of diagnostics and risk factors. When all patients with DCIS are considered, the overall mortality is extremely low, only about 1–2%. On the other hand, breast-conserving surgery is only curative in 75–85%; 50% of the local recurrences have proven to be invasive with a mortality rate of 12–15%. There is no place for axillary node dissection, adjuvant hormonal treatment or chemotherapy in the treatment. Important factors in predicting local recurrence are age, family history, nuclear grade, comedo-type necrosis, tumor size and margin width. With the addition of radiation therapy to excisional surgery, there is a 50% reduction in the overall local recurrence rate. The Van Nuys Prognostic Index (VNPI, recently updated, is a tool that quantifies measurable prognostic factors that can be used in the decision-making process of treatment. Recent data from large cohort studies and randomized trials have emerged to guide treatment. DCIS is now understood to have diverse malignant potential and it is unlikely that there will be a single treatment for this wide range of lesions. Advances in molecular biology and gene expression profiling of human breast tumors have been providing important insights into the relationship

  16. High Fidelity In Situ Shoulder Dystocia Simulation

    Directory of Open Access Journals (Sweden)

    Andrew Pelikan, MD

    2018-04-01

    Full Text Available Audience: Resident physicians, emergency department (ED staff Introduction: Precipitous deliveries are high acuity, low occurrence in most emergency departments. Shoulder dystocia is a rare but potentially fatal complication of labor that can be relieved by specific maneuvers that must be implemented in a timely manner. This simulation is designed to educate resident learners on the critical management steps in a shoulder dystocia presenting to the emergency department. A special aspect of this simulation is the unique utilization of the “Noelle” model with an instructing physician at bedside maneuvering the fetus through the stations of labor and providing subtle adjustments to fetal positioning not possible though a mechanized model. A literature search of “shoulder dystocia simulation” consists primarily of obstetrics and mid-wife journals, many of which utilize various mannequin models. None of the reviewed articles utilized a bedside provider maneuvering the fetus with the Noelle model, making this method unique. While the Noelle model is equipped with a remote-controlled motor that automatically rotates and delivers the baby either to the head or to the shoulders and can produce a turtle sign and which will prevent delivery of the baby until signaled to do so by the instructor, using the bedside instructor method allows this simulation to be reproduced with less mechanistically advanced and lower cost models.1-5 Objectives: At the end of this simulation, learners will: 1 Recognize impending delivery and mobilize appropriate resources (ie, both obstetrics [OB] and NICU/pediatrics; 2 Identify risk factors for shoulder dystocia based on history and physical; 3 Recognize shoulder dystocia during delivery; 4 Demonstrate maneuvers to relieve shoulder dystocia; 5 Communicate with team members and nursing staff during resuscitation of a critically ill patient. Method: High-fidelity simulation. Topics: High fidelity, in situ, Noelle model

  17. Microbial Repopulation Following In Situ STAR Remediation

    Science.gov (United States)

    Gerhard, J.; Overbeeke, G.; Edwards, E.; Lomheim, L.; Grant, G.

    2016-12-01

    STAR (Self-sustaining Treatment for Active Remediation) is an emerging remediation technology that employs a self-sustaining smouldering reaction to destroy nonaqueous phase liquids (NAPLs) in the subsurface. The reaction front travels outwards from an ignition well at approximately 0.5 per day and subjects the soil to temperatures of 400°C-1000°C. The objectives of this work were to monitor re-saturation of the soil over time and quantify the microbial repopulation of the treated zone. STAR is currently being applied as a full scale, in situ remedy for coal tar beneath a former creosol manufacturing facility in New Jersey, USA. This study analyzed soil cores taken at regular intervals following STAR treatment, allowing time for groundwater to re-infiltrate and for microbial populations to potentially reestablish. Soil and groundwater were analyzed for total number of microorganisms via quantitative Polymerase Chain Reaction (qPCR), as well as microbial diversity via amplicon sequencing. Results demonstrate that microbes rapidly repopulated over a 2 month period to 106 gene copies/g of soil. However, concentrations in the treated zone did not rise above this concentration over 6 months post-STAR, indicating a low carrying capacity of the treated soil. To examine the system in more detail and consider the effects of bio-stimulation, a bench top column study using site soil and artificial groundwater explored the rate at which STAR-treated soil is repopulated with naturally occurring microorganisms in the presence and absence of lactate and a terminal electron acceptor. Results demonstrated that biostimulation did not increase the carrying capacity of the STAR treated sol, but rather shifted the microbial community to reflect the TEA provided, in this case, promoting sulfate reducers. Overall, the work illustrates that microbial populations in STAR treated soil do recover via groundwater infiltration but robust communities will take time to naturally establish.

  18. In-situ chemical oxidation of MTBE

    International Nuclear Information System (INIS)

    Kelley, K.L.; Marley, M.C.; Sperry, K.L.

    2002-01-01

    In-situ chemical oxidation (ISCO) can be a cost-effective method for the destruction of source areas of methyl tertiary butyl ether (MTBE). Several ISCO processes have been tested successfully under laboratory conditions and a few have proven successful when field tested for the destruction of MTBE. This paper reviews the state of the art with respect to MTBE oxidation for several common oxidants and Advanced Oxidation Processes (AOPs). Four frequently used oxidants are reviewed in this paper: hydrogen peroxide (H 2 O 2 ), ozone (O 3 ), permanganate (MnO 4 - ), and persulfate (S 2 O 8 2- ). When choosing an oxidant for a specific remediation strategy, trade-offs exist between oxidant strength and stability in the subsurface. Aquifer and water quality parameters such as pH, alkalinity, and soil oxidant demand (SOD) may influence the initiation and effectiveness of the ISCO reaction and may significantly increase the amount of oxidant required to treat the target contaminant. Oxidation end products are an important consideration in the selection of an oxidant, as not all oxidants have proven successful in complete mineralization of MTBE. Tert-butyl formate (TBF) and tert-butyl alcohol (TBA) are the major intermediate products in the oxidative reactions of MTBE and may pose a greater health hazard than MTBE. Other factors, including regulatory restrictions, need to be considered when choosing an oxidant for a specific application. This paper will highlight the chemistry of the oxidant/MTBE reactions, successes or limitations observed under laboratory and field conditions, and practical design advice when employing the oxidant. (author)

  19. In Situ Measurement of Bedrock Erosion

    Science.gov (United States)

    Rieke-Zapp, D. H.; Beer, A.; Turowski, J. M.; Campana, L.

    2012-07-01

    While long term erosion rates of bedrock material may be estimated by dating methods, current day erosion rates are - if at all available - based on rough estimates or on point measurements. Precise quantification of short term erosion rates are required to improve our understanding of short term processes, for input in landscape evolution models, as well as for studying the mechanics and efficiency of different erosion processes in varying geomorphological settings. Typical current day erosion rates in the European Alps range from sub-millimetre to several millimetres per year depending on the dominant erosion processes. The level of surveying accuracy required for recurring sub-millimetre to millimetre measurements in the field is demanding. A novel surveying setup for in-situ measurement of bedrock erosion was tested recently in three different locations in Switzerland. Natural bedrock was investigated in the Gornera gorge close to Zermatt. Further on, bedrock samples were installed in exposed locations in the Erlenbach research watershed close to Einsiedeln, and in the Illgraben debris flow channel, located in the Canton Schwyz and Valais, respectively. A twofold measurement approach was chosen for all locations. For the first setup control points providing an absolute reference frame for recurrent measurements were embedded close to the area of interest. Close range photogrammetry was applied to measure surface changes on the bedrock samples. The precision for surface measurements in the field was 0.1 mm (1 σ) and thus suitable for the application. The equipment needed for the surveys can easily be carried to the field. At one field site a structured light scanner was used along with the photogrammetric setup. Although the current generation of structured light scanners appeared less suitable for field application, data acquisition was much faster and checking the data for completeness in the field was straight forward. The latest generation of compact

  20. [Monostotic fibrous dysplasia of the sphenoid sinus: two cases report and literature review].

    Science.gov (United States)

    Chen, Yu; Sun, Hong; He, Guangxiang; Jiang, Ming

    2009-12-01

    To study the etiopathogenesis, clinical features, diagnosis and treatments of monostotic fibrous dysplasia of the sphenoid sinus. Two cases of monostotic fibrous dysplasia of the sphenoid sinus without any symptoms was reported with relevant literature review. No aggravation was found after 6 months-follow-up. The cranial fibrous dysplasia has low incidence rate with non-specific symptoms and high rate of misdiagnosis. The monostotic fibrous dysplasia of the sphenoid sinus without any symptom is rarely seen clinically. Imagiological examination, for example, CT and MRI, is valuable for the diagnosis of this disease. The histopathological evidence is absolutely necessary to make definite diagnosis. The conservative treatment may be chosen for the asymptomatic cases. Nasal Endoscopic surgery can not only remove the diseased region but also make diagnosis. The long-term follow-up should be carried out in all of these patients.

  1. Different Structures of PVA Nano fibrous Membrane for Sound Absorption Application

    International Nuclear Information System (INIS)

    Mohrova, J.; Kalinova, K.

    2012-01-01

    The thin nano fibrous layer has different properties in the field of sound absorption in comparison with porous fibrous material which works on a principle of friction of air particles in contact with walls of pores. In case of the thin nano fibrous layer, which represents a sound absorber here, the energy of sonic waves is absorbed by the principle of membrane resonance. The structure of the membrane can play an important role in the process of converting the sonic energy to a different energy type. The vibration system acts differently depending on the presence of smooth fibers in the structure, amount of partly merged fibers, or structure of polymer foil as extreme. Polyvinyl alcohol (PVA) was used as a polymer because of its good water solubility. It is possible to influence the structure of nano fibrous layer during the production process thanks to this property of polyvinyl alcohol.

  2. Lipoblastic differentiation in a primary localized fibrous mesothelioma of the peritoneum.

    Science.gov (United States)

    Donna, A; Betta, P G; Ribotta, M

    1996-12-01

    Lipoblastic differentiation in fibrous mesotheliomas is an extremely rare occurrence. We present the histological and immunohistochemical features of a case of localized peritoneal mesothelioma with lipoblastic differentiation in an 80-year old man and discuss the differential diagnosis with liposarcoma.

  3. Surgical treatment of craniofacial fibrous dysplasia in adults.

    Science.gov (United States)

    Bowers, Christian A; Taussky, Philipp; Couldwell, William T

    2014-01-01

    Craniofacial fibrous dysplasia (FD) is a rare disorder that may require neurosurgical expertise for definitive management; however, surgical management of FD in adult patients is uncommon. Although other therapies have been shown to slow progression, the only definitive cure for adult craniofacial FD is complete resection with subsequent reconstruction. The authors review the biological, epidemiologic, clinical, genetic, and radiographic characteristics of adult FD, with an emphasis on surgical management of FD. They present a small series of three adult patients with complex FD that highlights the surgical complexity required in some adult patients with FD. Because of the complex nature of these adult polyostotic craniofacial cases, the authors used neurosurgical techniques specific to the different surgical indications, including a transsphenoidal approach for resection of sphenoidal sinus FD, a transmaxillary approach to decompress the maxillary branch of the trigeminal nerve with widening of the foramen rotundum, and complete calvarial craniectomy with cranioplasty reconstruction. These cases exemplify the diverse range of skull base techniques required in the spectrum of surgical management of adult FD and demonstrate that novel variations on standard neurosurgical approaches to the skull base can provide successful outcomes with minimal complications in adults with complex craniofacial FD.

  4. MRI diagnosis of solitary fibrous tumor in the orbit

    International Nuclear Information System (INIS)

    Dong Jiyong; Yang Bentao; Zhang Wu; Wang Zhenchang; Xian Junfang

    2012-01-01

    Objective: To explore the MRI features of solitary fibrous tumor (SFT) in the orbit. Methods: The MRI findings of 7 patients with SFT in the orbit confirmed by histopathology were analyzed retrospectively. Results: Of the 7 lesions,5 occurred in the right orbit and 2 in the left orbit. Six lesions were located in the extraconal space near the lacrimal gland fossa, including 5 in the superomedial region and 1 in the inferolateral region. The other one was located in the retrobulbar intraconal space. The lesions with well-defined margin showed elliptic shape in 6 cases and lobulated configuration in 1. The maximum diameter of the lesions ranged from 18 to 40 mm (mean, 31 mm). The lesions showed homogeneous isointense relative to gray matter on T 1 -weighted images in 6 patients. On T 2 -weighted images, the lesions showed heterogeneous hypointense in 5 patients, isointense and hyperintense in one patient respectively. SFT demonstrated markedly homogeneous enhancement in 6 patients and inhomogeneous enhancement in one patient. The time-intensity curves (TIC) of 7 patients exhibited a rapidly enhancing and rapid washout pattern on dynamic contrast-enhanced (DCE) MRI. Conclusion: Hypointense signal on T 2 WI, marked enhancement on contrast-enhanced T 1 WI, and a rapidly enhancing and rapid washout pattern TIC on DCE MRI are the typical MRI features of orbital SFT. (authors)

  5. Imaging of the Fibrous Cap in Atherosclerotic Carotid Plaque

    International Nuclear Information System (INIS)

    Saba, Luca; Potters, Fons; Lugt, Aad van der; Mallarini, Giorgio

    2010-01-01

    In the last two decades, a substantial number of articles have been published to provide diagnostic solutions for patients with carotid atherosclerotic disease. These articles have resulted in a shift of opinion regarding the identification of stroke risk in patients with carotid atherosclerotic disease. In the recent past, the degree of carotid artery stenosis was the sole determinant for performing carotid intervention (carotid endarterectomy or carotid stenting) in these patients. We now know that the degree of stenosis is only one marker for future cerebrovascular events. If one wants to determine the risk of these events more accurately, other parameters must be taken into account; among these parameters are plaque composition, presence and state of the fibrous cap (FC), intraplaque haemorrhage, plaque ulceration, and plaque location. In particular, the FC is an important structure for the stability of the plaque, and its rupture is highly associated with a recent history of transient ischaemic attack or stroke. The subject of this review is imaging of the FC.

  6. Fractal Model for Acoustic Absorbing of Porous Fibrous Metal Materials

    Directory of Open Access Journals (Sweden)

    Weihua Chen

    2016-01-01

    Full Text Available To investigate the changing rules between sound absorbing performance and geometrical parameters of porous fibrous metal materials (PFMMs, this paper presents a fractal acoustic model by incorporating the static flow resistivity based on Biot-Allard model. Static flow resistivity is essential for an accurate assessment of the acoustic performance of the PFMM. However, it is quite difficult to evaluate the static flow resistivity from the microstructure of the PFMM because of a large number of disordered pores. In order to overcome this difficulty, we firstly established a static flow resistivity formula for the PFMM based on fractal theory. Secondly, a fractal acoustic model was derived on the basis of the static flow resistivity formula. The sound absorption coefficients calculated by the presented acoustic model were validated by the values of Biot-Allard model and experimental data. Finally, the variation of the surface acoustic impedance, the complex wave number, and the sound absorption coefficient with the fractal dimensions were discussed. The research results can reveal the relationship between sound absorption and geometrical parameters and provide a basis for improving the sound absorption capability of the PFMMs.

  7. Properties of nanoparticles affecting simulation of fibrous gas filter performance

    International Nuclear Information System (INIS)

    Tronville, Paolo; Rivers, Richard

    2015-01-01

    Computational Fluid Dynamics (CFD) codes allow detailed simulation of the flow of gases through fibrous filter media. When the pattern of gas flow between fibers has been established, simulated particles of any desired size can be “injected” into the entering gas stream, and their paths under the influence of aerodynamic drag, Brownian motion and electrostatic forces tracked. Particles either collide with a fiber, or pass through the entire filter medium. They may bounce off the fiber surface, or adhere firmly to the surface or to particles previously captured. Simulated injection of many particles at random locations in the entering stream allows the average probability of capture to be calculated. Many particle properties must be available as parameters for the equations defining the forces on particles in the gas stream, at the moment of contact with a fiber, and after contact. Accurate values for all properties are needed, not only for predicting particle capture in actual service, but also to validate models for media geometries and computational procedures used in CFD. We present a survey of existing literature on the properties influencing nanoparticle dynamics and adhesion. (paper)

  8. Fast numerical upscaling of heat equation for fibrous materials

    KAUST Repository

    Iliev, Oleg

    2010-08-01

    We are interested in numerical methods for computing the effective heat conductivities of fibrous insulation materials, such as glass or mineral wool, characterized by low solid volume fractions and high contrasts, i.e., high ratios between the thermal conductivities of the fibers and the surrounding air. We consider a fast numerical method for solving some auxiliary cell problems appearing in this upscaling procedure. The auxiliary problems are boundary value problems of the steady-state heat equation in a representative elementary volume occupied by fibers and air. We make a simplification by replacing these problems with appropriate boundary value problems in the domain occupied by the fibers only. Finally, the obtained problems are further simplified by taking advantage of the slender shape of the fibers and assuming that they form a network. A discretization on the graph defined by the fibers is presented and error estimates are provided. The resulting algorithm is discussed and the accuracy and the performance of the method are illusrated on a number of numerical experiments. © Springer-Verlag 2010.

  9. Fibrous dysplasia of the clivus: A Case Report

    Directory of Open Access Journals (Sweden)

    Lewis D

    2007-01-01

    Full Text Available Introduction:Fibrous dysplasia (FD of the clivus, first described by Lichtenstein in 1938, is a very rare developmental, non-hereditary disorder caused by abnormal proliferation and maturation of fibroblasts resulting in replacement of mature bone by weak and immature bone.Case reportA 26-year-old otherwise fit and healthy Caucasian female presented to the Emergency Department with headache for 3 days, recurrent and getting worse. Neurological examination was normal. Blood investigations were essentially normal. Head CT scan showed slightly expanded clivus with ground glass density. MRI revealed slight expansion with focal signal alteration within the clivus, being hypointense on T1W images and FLAIR images and showing slightly increased signal intensity on T2W image.While in hospital the patient’s symptoms resolved with conventional painkiller treatment. Based on the current evidence available we opted for a conservative treatment and regular follow-ups and up to the day of writing this report, about eight months later, the patient is still on the same management plan.

  10. Postheated Model of Confined High Strength Fibrous Concrete

    Directory of Open Access Journals (Sweden)

    Kaleem A. Zaidi

    2016-01-01

    Full Text Available HSC normally suffers from low stiffness and poor strain capacity after exposure to high temperature. High strength confined fibrous concrete (HSCFC is being used in industrial structures and other high rise buildings that may be subjected to high temperature during operation or in case of an accidental fire. The proper understanding of the effect of elevated temperature on the stress-strain relationship of HSCFC is necessary for the assessment of structural safety. Further stress-strain model of HSCFC after exposure to high temperature is scarce in literature. Experimental results are used to generate the complete stress-strain curves of HSCFC after exposure to high temperature in compression. The variation in concrete mixes was achieved by varying the types of fibre, volume fraction of fibres, and temperature of exposure from ambient to 800°C. The degree of confinement was kept constant in all the specimens. A comparative assessment of different models on the high strength confined concrete was also conducted at different temperature for the accuracy of proposed model. The proposed empirical stress-strain equations are suitable for both high strength confined concrete and HSCFC after exposure to high temperature in compression. The predictions were found to be in good agreement and well fit with experimental results.

  11. A Study of Failure Criteria of Fibrous Composite Materials

    Science.gov (United States)

    Paris, Federico; Jackson, Karen E. (Technical Monitor)

    2001-01-01

    The research described in this paper is focused on two areas: (1) evaluation of existing composite failure criteria in the nonlinear, explicit transient dynamic finite element code, MSC.Dytran, and (2) exploration of the possibilities for modification of material and failure models to account for large deformations, progressive failure, and interaction of damage accumulation with stress/strain response of laminated composites. Following a review of the MSC.Dytran user manual, a bibliographical review of existing failure criteria of composites was performed. The papers considered most interesting for the objective of this report are discussed in section 2. The failure criteria included in the code under consideration are discussed in section 3. A critical summary of the present procedures to perform analysis and design of composites is presented in section 4. A study of the most important historical failure criteria for fibrous composite materials and some of the more recent modifications proposed were studied. The result of this analysis highlighted inadequacies in the existing failure criteria and the need to perform some numerical analyses to elucidate the answer to questions on which some of the proposed criteria are based. A summary of these ideas, which is a proposal of studies to be developed, is presented in section 5. Finally, some ideas for future developments are summarized in section 6.

  12. Applications of fibrous substrates containing insolubilized phase change polymers

    Science.gov (United States)

    Vigo, Tyrone L.; Bruno, Joseph S.

    1993-01-01

    Incorporation of polyethylene glycols into fibrous substrates produces several improved functional properties when they are insolubilized by crosslinking with a methylolamide resin or by polyacetal formation by their reaction with glyoxal. The range of molecular weights of polyols that may be insolubilized is broad as are the curing conditions (0.25-10 min at 80-200C). Most representative fiber types and blends (natural and synthetic) and all types of fabric constructions (woven, nonwoven and knit) have been modified by incorporation of the bound polyols. The most novel property is the thermal adaptability of the modified substrates to many climatic conditions. This adaptability is due to the high latent heat of the crosslinked polyols that function as phase change materials, the hydrophilic nature of the crosslinked polymer and its enhanced thermal conductivity. Other enhanced properties imparted to fabrics include flex and flat abrasion, antimicrobial activity, reduced static charge, resistance to oily soils, resiliency, wind resistance and reduced lint loss. Applications commercialized in the U.S. and Japan include sportswear and skiwear. Several examples of electric sets of properties useful for specific end uses are given. In addition, other uses are biomedical horticultural, aerospace, indoor insulation, automotive interiors and components and packaging material.

  13. FIBROUS MONOLITH WEAR RESISTANT COMPONENTS FOR THE MINING INDUSTRY

    Energy Technology Data Exchange (ETDEWEB)

    Mark J. Rigali; Kenneth L. Knittel; Mike L. Fulcher

    2002-03-01

    During this reporting period, work continued on development of formulations using the materials identified as contenders for the fibrous monolith wear resistant components. The FM structures fabricated were: diamond/WC-Co, B{sub 4}C/WC-Co, TiB{sub 2}/WC-Co, WC-Co/Co, WC-Co/WC-Co. Results of our consolidation densification studies on these systems lead to the down-selection of WC-Co/WC-Co, WC-Co/Co and diamond/WC-Co for further development for mining applications including drill bit inserts, roof bit inserts, radial tools conical tools and wear plates (WC-Co based system only) for earth moving equipment. Prototype component fabrication focused on the fabrication of WC-Co/WC-Co FM conical tools, diamond/WC-Co coated drill bit insert prototypes. Fabrication of WC-Co/WC-Co FM insert prototypes for a grader blade is also underway. ACR plans to initiate field-testing of the drill bit insert prototypes and the grader blade insert this summer (2002). The first WC-Co/WC-Co FM conical tool prototypes were sent to Kennametal for evaluation towards the end of the current reporting period.

  14. Malignant Fibrous Histiocytoma of the Lung: A Case Report

    Directory of Open Access Journals (Sweden)

    Seyed Hossein Fattahi Masuom

    2017-03-01

    Full Text Available Malignant Fibrous Histiocytoma (MFH is the most common soft-tissue sarcoma which predominantly surfaces in the retro-peritoneum and extremity. MFH of lung is a very rare condition. The diagnosis is essentially through histologic examination. However, the invasion of the chest wall or other organs might help establish the malignant nature.We report a case of a 77-year-old man who had been presented with a history of dyspnea and non-massive hemoptysis. Computed Tomography (CT scan of the chest showed a lobulated mass which had developed into the hilum of the lung. Furthermore, the inferior pulmonary artery was invaded. Thus, the final histological diagnosis confirmed MFH. The patient underwent a left pneumonectomy along with the dissection of the regional lymph nodes. Although lung MFH is rather an uncommon condition, it must be taken into consideration in differentiating between the types of lung tumor. What can be concluded is that complete surgical resection is the essential approach.

  15. Factors influencing malignant evolution and long-term survival in solitary fibrous tumours of the pleura

    OpenAIRE

    Rodríguez-González, Marta; Novoa, Nuria M.; Gomez, Maria T.; García, Juan L.; Ludeña, María Dolores

    2014-01-01

    Solitary pleuro-pulmonary fibrous tumours are relatively uncommon neoplasms that are difficult to manage therapeutically and which, cytogenetically, have been poorly studied. The aim of the present work was to analyse the characteristics of a series of consecutive operated solitary pleural fibrous tumours in an attempt to discover a malignant pattern of evolution. This was a retrospective observational study of 19 cases. Samples were studied for clinical, histological, immunohistochemical and...

  16. Endoscopic treatment of nasolacrimal sac obstruction secondary to fibrous dysplasia of paranasal sinuses.

    Science.gov (United States)

    Zodpe, Prakash; Chung, Seung-Won; Kang, Hee Joon; Lee, Sang Hag; Lee, Heung-Man

    2007-05-01

    Fibrous dysplasia involving paranasal sinuses mostly has asymptomatic features, but sometimes may cause signs and symptoms which relate to the location and extent of bony abnormalities. The use of endoscopic nasal surgery for debulking ethmoidal fibrous dysplasia, blocking the left nasolacrimal sac and simultaneous intranasal endoscopic dacryocystorhinostomy with silicone intubation is presented. The procedure and advantages of endoscopic approach over the external approach are outlined in this paper.

  17. Poliostotic fibrous dysplasia in the left maxilla sinus. Case of presentation.

    OpenAIRE

    Félix Dueñas Ros; Nery María Díaz Yanes; Dianarelys Villafuerte Delgado

    2007-01-01

    We present a clinic case of poliostotic fibrous dysplasia in the left maxilla sinus extended to Pterigopaltinar cavity and sphenoid sinus in a 26 year old woman who suffer from facial deformation. Paranasal x ray images didn’t permit to make the differential diagnosis between tumor or inflammatory lesions at the beginning, CT scan showed hiperdensy lesions like a tumor that suggest fibrous dysplasia. The final diagnosis was obtained by biopsy of the lesions.

  18. Electrospinning synthesis and characterization of PLA-PEG-MNPs composite fibrous membranes

    Science.gov (United States)

    Kumar, M.; Klimke, S.; Preiss, A.; Unruh, D.; Wengerowsky, D.; Lehmann, R.; Sindelar, R.; Klingelhöfer, G.; Boča, R.; Renz, F.

    2017-11-01

    An electrospinning technique was used to fabricate PLA, PLA-PEG and PLA-PEG-MNPs composite fibrous membranes. The morphology of electrospun composite membranes were characterized by scanning electron microscope. To test the potential availability of MNPs in PLA-PEG composite membranes, TG, Raman, Mössbauer, VSM and ICP-OES analysis were used. The PLA-PEG composite fibrous membranes showed the presence of MNPs, hence offers the possibility for magnetically triggered on-demand drug delivery.

  19. Fibrous Pseudotumor of the Tunica Vaginalis Associated With Hydrocele and Testicular Atrophy

    Directory of Open Access Journals (Sweden)

    Pande Made Wisnu Tirtayasa

    2014-07-01

    Full Text Available Fibrous pseudotumors of the testicular tunics and paratesticular tissue are uncommon lesions. They typically arise as painless scrotal masses that may be associated with hydrocele or history of surgery, trauma, or infection. Although benign, these lesions often clinically indicate malignancy and usually remain undiagnosed preoperatively. Here, we report on a 59-year-old man with fibrous pseudotumor of the tunica vaginalis associated with hydrocele and testicular atrophy.

  20. BMP-2 immobilized PLGA/hydroxyapatite fibrous scaffold via polydopamine stimulates osteoblast growth.

    Science.gov (United States)

    Zhao, Xingyu; Han, Yu; Li, Jiawei; Cai, Bo; Gao, Hang; Feng, Wei; Li, Shuqiang; Liu, Jianguo; Li, Dongsong

    2017-09-01

    Combining biomaterials scaffolds with bone morphogenetic protein-2 (BMP-2) is currently used to promote the regeneration of bone tissue. However, the traditional strategies used to add BMP-2 into the polymer scaffolds directly suffer from limitations that can result in lower growth factor loading and damage the bioactivity of growth factors. In this study, we report the fabrication of poly(lactide-co-glycolide)/hydroxyapatite (PLGA/HA) composite fibrous scaffolds via melt-spinning method to mimic native extracellular matrix (ECM). In order to effectively immobilize BMP-2 on PLGA/HA composite fibrous scaffolds, the surface of the scaffold was modified with polydopamine (PDA) (PDA-PLGA/HA). PDA was chosen as an adhesive polymeric bridge-layer between PLGA/HA fibrous scaffolds and BMP-2. Analysis of the scaffold using scanning electron microscopy, Fourier transform infrared spectroscopy and X-ray photoelectron spectroscope revealed that the PDA coating was attached to the scaffold surface. Moreover, analysis of the scaffold using water contact angle demonstrated an increased hydrophilicity via PDA modification. Furthermore, the PDA coating effectively immobilized BMP-2 on the PDA-PLGA/HA fibrous scaffold and a sustained release profile of BMP-2 was achieved in the BMP-2-immobilized PLGA/HA fibrous scaffold. In vitro experiments showed that BMP-2-immobilized PLGA/HA fibrous scaffold significantly promoted the attachment and proliferation of MC3T3-E1 cells. More importantly, the ALP activity, mRNA expression of osteosis-related genes and calcium deposition in MC3T3-E1 cells cultured on BMP-2-immobilized PLGA/HA fibrous scaffold were significantly increased. These results collectively demonstrate that the BMP-2-immobilized PLGA/HA fibrous scaffold is a promising candidate for bone regeneration. Copyright © 2017 Elsevier B.V. All rights reserved.

  1. In situ detection of horizontal transfer of mobile genetic elements

    DEFF Research Database (Denmark)

    Haagensen, Janus Anders Juul; Hansen, Susse Kirkelund; Johansen, Tove

    2002-01-01

    promoters (transfer reporters) it was thus possible to detect transfer events in situ and correlate these with either the location of donor and recipient cells or with the growth activity of the cells. In some cases, expression of unstable Gfp from a growth-controlled promoter, rrnB from Escherichia coli......, was used to monitor bacterial growth activity in situ. Differential tagging of mobilizing and mobilizable plasmids with different genes encoding fluorescent proteins with varying emission wavelengths allowed in situ detection of plasmid mobilization and detection of retro-transfer on agar surfaces...

  2. NOVEL IN-SITU METAL AND MINERAL EXTRACTION TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    Glenn O' Gorman; Hans von Michaelis; Gregory J. Olson

    2004-09-22

    This white paper summarizes the state of art of in-situ leaching of metals and minerals, and describes a new technology concept employing improved fragmentation of ores underground in order to prepare the ore for more efficient in-situ leaching, combined with technology to continuously improve solution flow patterns through the ore during the leaching process. The process parameters and economic benefits of combining the new concept with chemical and biological leaching are described. A summary is provided of the next steps required to demonstrate the technology with the goal of enabling more widespread use of in-situ leaching.

  3. [Fibrous dysplasia situated in maxilla--diagnostic and treatment difficulties illustrated with case report].

    Science.gov (United States)

    Reymond, Jerzy; Podsiadło, Maciej; Wyskiel, Maciej

    2006-01-01

    Fibrous dysplasia is a benign and slowly progressing pathological disorder of bone, in which normal cancellous bone is replaced by immature woven bone and fibrous tissue. The disease is rare and its etiology is unknown. On the base of literature review the clinical, radiological and microscopical characteristics of the disease was presented. For illustration of prolongation of this process and the diagnostic and therapeutic difficulties encountered in this disease a single case of dysplasia fibrosa was presented also. This is the case of 28 year old man, who is in follow-up for 18 years. In clinical investigation a relief of left malar region and left cheek. In mouth cavity swelling of left maxillary process was observed as well as anterior wall of maxillary sinus. All teeth were in good condition. In CT investigation irregular bone thickenings of anterior and lateral walls of maxillary sinus were visible. In general anesthesia a plastic surgery of the maxilla was performed. In histopathology was observed typical picture of fibrous dysplasia. As a conclusion of this work we would like to state that fibrous dysplasia occurs mainly in young people; clinical and radiological signs of fibrous dysplasia are not sufficient to diagnose this disease: the most important is histopathology result; operative treatment of fibrous dysplasia in a way of tissue modeling allows for restoration of symmetrical face view, but never goes to full healing.

  4. Fibrous dysplasia of middle turbinate associated with Widal syndrome: endoscopic treatment of a rare case.

    Science.gov (United States)

    Saetti, R; Silvestrini, M; Marino, F; Narne, S

    2004-10-01

    Fibrous dysplasia, a rare bony disease, is characterised by substitution of normal bone with immature tissue embedded in a fibrous stroma. It can be either monostotic or involve several bones. Fibrous dysplasia is usually asymptomatic but, in the advanced stage, pain due to neural compression or pathological fractures may occur. In the case of cranio-facial involvement, ocular, masticatory, respiratory or auditory functional alterations are possible. A case of fibrous dysplasia, limited to the middle turbinate and associated with Widal triad (sinus-nasal polyposis, asthma, acetyl salicylic acid intolerance), is described. Craniofacial computed tomography revealed enlargement of left middle turbinate with characteristic "ground-glass" appearance. The patient underwent anterior bilateral functional endoscopic sinus surgery with near-total resection of left middle turbinate. Histopathological examination confirmed the diagnosis of fibrous dysplasia. After 2 years the patient is still asymptomatic. Videorhinoscopy shows good sinus-nasal patency without disease recurrence. Even though exceptional, localization of fibrous dysplasia at middle turbinate has been described, therefore, it must be considered in the differential diagnosis of the craniofacial ossifying disorder. For localized and symptomatic lesions, endoscopic surgery is an effective option. Scrupulous life-long follow-up is necessary due to the high percentage of recurrence and possible malignant degeneration.

  5. Novel Ultrafine Fibrous Poly(tetrafluoroethylene Hollow Fiber Membrane Fabricated by Electrospinning

    Directory of Open Access Journals (Sweden)

    Qinglin Huang

    2018-04-01

    Full Text Available Novel poly(tetrafluoroethylene (PTFE hollow fiber membranes were successfully fabricated by electrospinning, with ultrafine fibrous PTFE membranes as separation layers, while a porous glassfiber braided tube served as the supporting matrix. During this process, PTFE/poly(vinylalcohol (PVA ultrafine fibrous membranes were electrospun while covering the porous glassfiber braided tube; then, the nascent PTFE/PVA hollow fiber membrane was obtained. In the following sintering process, the spinning carrier PVA decomposed; meanwhile, the ultrafine fibrous PTFE membrane shrank inward so as to further integrate with the supporting matrix. Therefore, the ultrafine fibrous PTFE membranes had excellent interface bonding strength with the supporting matrix. Moreover, the obtained ultrafine fibrous PTFE hollow fiber membrane exhibited superior performances in terms of strong hydrophobicity (CA > 140°, high porosity (>70%, and sharp pore size distribution. The comprehensive properties indicated that the ultrafine fibrous PTFE hollow fiber membranes could have potentially useful applications in membrane contactors (MC, especially membrane distillation (MD in harsh water environments.

  6. Robust hydrophobic polyurethane fibrous membranes with tunable porous structure for waterproof and breathable application

    Science.gov (United States)

    Gu, Jiatai; Gu, Haihong; Cao, Jin; Chen, Shaojie; Li, Ni; Xiong, Jie

    2018-05-01

    In this work, novel nanofibrous membranes with waterproof and breathable (W&B) performance were successfully fabricated by the combination of electrospinning and surface modification technology. This fibrous membranes consisted of polyurethane (PU), NaCl, and fluoroalkylsilane (FAS). Firstly, The fibrous construction and porous structure of fibrous membranes were regulated by tuning the NaCl concentrations in PU solutions. Then, the obtained PU/NaCl fibrous membranes were further modified with fluoroalkylsilane (FAS) to improve hydrophobic property. The synergistic effect of porous structure and hydrophobicity on waterproof and breathable performance was investigated. Furthermore, the mechanical property of fibrous membranes was deeply analysed on the basis of macromolecule orientation and adhesive structure. Benefiting from the optimized porous structure and hydrophobic modification, the resultant fibrous membranes exhibited excellent waterproof (hydrostatic pressure of 1261 Mbar), breathable (water vapor transmission (WVT) rate of 9.06 kg m-2 d-1 and air permeability of 4.8 mm s-1) performance, as well as high tensile strength (breakage stress of 10.4 MPa), suggesting a promising candidate for various applications, especially in protective clothing.

  7. In Situ Measurements of Meteoric Ions

    Science.gov (United States)

    Grebowsky, Joseph M.; Aiken, Arthur C.; Einaudi, Franco (Technical Monitor)

    2001-01-01

    Extraterrestrial material is the source of metal ions in the Earth's atmosphere, Each year approx. 10(exp 8) kg of material is intercepted by the Earth. The origin of this material is predominantly solar orbiting interplanetary debris from comets or asteroids that crosses the Earth's orbit. It contains a very small amount of interstellar material. On occasion the Earth passes through enhanced amounts of debris associated with the orbit of a decaying comet. This leads to enhanced meteor shower displays for up to several days. The number flux of shower material is typically several times the average sporadic background influx of material. Meteoric material is some of the earliest material formed in the solar system. By studying the relative elemental abundances of atmospheric metal ions, information can be gained on the chemical composition of cometary debris and the chemical makeup of the early solar system. Using in situ sampling with rocket-borne ion mass spectrometers; there have been approximately 50 flights that made measurements of the metal ion abundances at attitudes between 80 and 130 km. It is this altitude range where incoming meteoric particles am ablated, the larger ones giving rise to visible meteor. displays. In several rocket measurements isotopic ratios of different atomic ion mass components and metal molecular ion concentrations have been determined and used to identify unambiguously the measured species and to investigate the processes controlling the metal ion distributions The composition of the Earth's ionosphere was first sampled by an ion mass spectrometer flown an a rocket in 1956. In 1958 a rocket-borne ion spectrometer identified, fbr the first time, a layer of metal ions near 95 km. These data were interpreted as evidence of an extraterrestrial rather than a terrestrial source. Istomin predicted: "It seems probable that with some improvement in the method that analysis of the ion composition in the E-region may be used for determining

  8. satellite and in-situ measurements

    Directory of Open Access Journals (Sweden)

    José de Jesús Salas Pérez

    2005-01-01

    Full Text Available La distribución espacial y temporal de la circulación superficial de la Bahía de Banderas se obtuvo con el empleo de series temporales de rapidez de viento, temperatura superficial del mar (AVHR radiómetro y un termógrafo, nivel del mar y trazas ascendentes y descendentes del radar altimétrico ERS-2. El período que abarca dichos datos es de cuatro años, ya que comenzó en el verano de 1997 y finalizó en el invierno de 2002. La marea en la Bahía es mixta (F=0.25 con predominio del armónico M2. La bahía no muestra características de resonancia con la marea del mar abierto. Amplitudes promedio de 30 cms., resultan en corrientes de marea de pocos cms./s. Las bajas frecuencias (periodos mayores a tres días parecen ser los principales generadores de la circulación marina en esta área, en la que predomina el periodo estacional sobre los otros periodos. FEOs fueron aplicadas a las componentes de velocidad, calculadas con observaciones de altimetría medidas en la boca de la Bahía, las cuales mostraron dos principales distribuciones espaciales. El primer periodo de distribución, que se extendió desde febrero hasta julio, muestra un flujo de entrada por la porción norte/sur de la bahía, con un flujo de salida por su boca (distribución anticiclónica. El segundo periodo se extiende desde agosto hasta diciembre y es opuesto al primero (distribución ciclónica. Las características de la circulación aquí presentadas son hipotéticas y observaciones de velocidad medidas in-situ deben confirmarlas

  9. In Situ Observations of Seismic Wave Propagation

    Science.gov (United States)

    Hudson, Kenneth Stewart

    Instrumented geotechnical field sites are designed to capture the infrequent but critically important in situ case histories of ground response, deformation, and liquefaction during significant earthquakes that generate high intensity ground shaking and large strains. The University of California at Santa Barbara has been monitoring densely instrumented geotechnical array field sites for almost three decades, with continuous recording now for more than a decade. When seismic waves travel into soil with sufficiently large ground motions, the soil behaves nonlinearly meaning the shear modulus of the material decreases from the linear value observed during weak ground motions. The degraded shear modulus can continue to affect a site for a period of time by changing the soil response during smaller ground motions after the large event. Decreased shear modulus is inferred when a decrease of shear wave velocity between two sensors in a vertical downhole array is observed. This velocity is calculated by measuring the difference in shear wave arrival times between the sensors using normalized cross correlation. The trend of decreasing shear wave velocity with increasing peak ground acceleration is observed at multiple geotechnical array field sites. The length of time the decreased velocity remains following stronger shaking is analyzed using more than 450 events over more than a decade at the Wildlife Liquefaction Array (WLA). Using both monthly and yearly velocity averages between sensors, there is evidence that suggests the shear wave velocity remains low over a period of months following larger significant shaking events at the site. In addition, at WLA there is evidence that the decrease in shear wave velocity can be detected at ground motion levels as low as 20 cm/s2. Additionally at the Garner Valley Downhole Array, a permanent cross-hole experiment is used to measure velocity changes in the soil with changing water table height. An underground hammer source swings

  10. In Situ Probe Science at Saturn

    Science.gov (United States)

    Atkinson, D.H.; Lunine, J.I.; Simon-Miller, A. A.; Atreya, S. K.; Brinckerhoff, W.; Colaprete, A.; Coustenis, A.; Fletcher, L. N.; Guillot, T.; Lebreton, J.-P.; hide

    2014-01-01

    A fundamental goal of solar system exploration is to understand the origin of the solar sys-tem, the initial stages, conditions, and processes by which the solar system formed, how the formation pro-cess was initiated, and the nature of the interstellar seed material from which the solar system was born. Key to understanding solar system formation and subsequent dynamical and chemical evolution is the origin and evolution of the giant planets and their atmospheres. Several theories have been put forward to explain the process of solar system formation, and the origin and evolution of the giant planets and their atmospheres. Each theory offers quantifiable predictions of the abundances of noble gases He, Ne, Ar, Kr, and Xe, and abundances of key isotopic ratios 4He3He, DH, 15N14N, 18O16O, and 13C12C. Detection of certain dis-equilibrium species, diagnostic of deeper internal pro-cesses and dynamics of the atmosphere, would also help discriminate between competing theories. Measurements of the critical abundance profiles of these key constituents into the deeper well-mixed at-mosphere must be complemented by measurements of the profiles of atmospheric structure and dynamics at high vertical resolution and also require in situ explora-tion. The atmospheres of the giant planets can also serve as laboratories to better understand the atmospheric chem-istries, dynamics, processes, and climates on all planets including Earth, and offer a context and provide a ground truth for exoplanets and exoplanetary systems. Additionally, Giant planets have long been thought to play a critical role in the development of potentially habitable planetary systems. In the context of giant planet science provided by the Galileo, Juno, and Cassini missions to Jupiter and Sat-urn, a small, relatively shallow Saturn probe capable of measuring abundances and isotopic ratios of key at-mospheric constituents, and atmospheric structure in-cluding pressures, temperatures, dynamics, and cloud

  11. In situ and operando transmission electron microscopy of catalytic materials

    DEFF Research Database (Denmark)

    Crozier, Peter A.; Hansen, Thomas Willum

    2015-01-01

    Catalytic nanomaterials play a major role in chemical conversions and energy transformations. Understanding how materials control and regulate surface reactions is a major objective for fundamental research on heterogeneous catalysts. In situ environmental transmission electron microscopy (ETEM...

  12. In-Situ Burning of Crude Oil on Water

    DEFF Research Database (Denmark)

    van Gelderen, Laurens

    in the small scale water basin. Boilovers were also observed during the burning of a heavy crude oil with a substantial light fraction without a water layer, however, which suggests that water is not essential for boilover occurrence. Further studies are required to determine the conditions under which......The fire dynamics and fire chemistry of in-situ burning of crude oil on water was studied in order to improve predictions on the suitability of this oil spill response method. For this purpose, several operational parameters were studied to determine the factors that control the burning efficiency...... of in-situ burning, i.e. the amount of oil (in wt%) removed from the water surface by the burning process. The burning efficiency is the main parameter for expressing the oil removal effectiveness of in-situ burning as response method and is thus relevant for suitability predictions of in-situ burning...

  13. In situ transesterification of highly wet microalgae using hydrochloric acid.

    Science.gov (United States)

    Kim, Bora; Im, Hanjin; Lee, Jae W

    2015-06-01

    This study addresses in situ transesterification of highly wet microalgae with hydrochloric acid (HCl) as a catalyst. In situ transesterification was performed by heating the mixture of wet algal cells, HCl, methanol, and solvent in one pot, resulting in the fatty acid methyl ester (FAME) yield over 90% at 95°C. The effects of reaction variables of temperature, amounts of catalyst, reactant, and solvent, and type of solvents on the yield were investigated. Compared with the catalytic effect of H2SO4, in situ transesterification using HCl has benefits of being less affected by moisture levels that are as high as or above 80%, and requiring less amounts of catalyst and solvent. For an equimolar amount of catalyst, HCl showed 15wt.% higher FAME yield than H2SO4. This in situ transesterification using HCl as a catalyst would help to realize a feasible way to produce biodiesel from wet microalgae. Copyright © 2015 Elsevier Ltd. All rights reserved.

  14. Modeling In Situ Bioremediation of Perchlorate-Contaminated Groundwater

    National Research Council Canada - National Science Library

    Secody, Roland E

    2007-01-01

    .... An innovative technology was recently developed which uses dual-screened treatment wells to mix an electron donor into perchlorate-contaminated groundwater in order to effect in situ bioremediation...

  15. Fathead minnow whole-mount in situ hybridization (WISH)

    Data.gov (United States)

    U.S. Environmental Protection Agency — This study demonstrates the potential of whole-mount in situ hybridization (WISH), in conjunction with quantitative real-time polymerase chain reaction (QPCR)...

  16. Comparison of Radar and In Situ Measurements of Atmospheric Turbulence

    National Research Council Canada - National Science Library

    Zink, Florian

    2004-01-01

    We compare measurements of refractive index structure constant C (2)(n) and energy dissipation rate e by VHF radar with in situ observations by high-resolution thermosondes during a campaign near Adelaide, Australia, in August 1998...

  17. In Situ Oxygen Production from Lunar and Martian Regolith Project

    Data.gov (United States)

    National Aeronautics and Space Administration — In situ oxygen production is of immense importance to NASA in the support of the NASA initiative to sustain man's permanent presence in space. The oxygen produced...

  18. Planetary Volatiles Extractor for In Situ Resource Utilization, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — In Situ Resource Utilization (ISRU) or ?living off the land relies on exploiting local resources and in turn reducing burden of transporting supplies. NASA has...

  19. In situ vitrification program treatability investigation progress report

    International Nuclear Information System (INIS)

    Arrenholz, D.A.

    1991-02-01

    This document presents a summary of the efforts conducted under the in situ vitrification treatability study during the period from its initiation in FY-88 until FY-90. In situ vitrification is a thermal treatment process that uses electrical power to convert contaminated soils into a chemically inert and stable glass and crystalline product. Contaminants present in the soil are either incorporated into the product or are pyrolyzed during treatment. The treatability study being conducted at the Idaho National Engineering Laboratory by EG ampersand G Idaho is directed at examining the specific applicability of the in situ vitrification process to buried wastes contaminated with transuranic radionuclides and other contaminants found at the Subsurface Disposal Area of the Radioactive Waste Management Complex. This treatability study consists of a variety of tasks, including engineering tests, field tests, vitrified product evaluation, and analytical models of the in situ vitrification process. 6 refs., 4 figs., 3 tabs

  20. Advanced hydraulic fracturing methods to create in situ reactive barriers

    International Nuclear Information System (INIS)

    Murdoch, L.

    1997-01-01

    This article describes the use of hydraulic fracturing to increase permeability in geologic formations where in-situ remedial action of contaminant plumes will be performed. Several in-situ treatment strategies are discussed including the use of hydraulic fracturing to create in situ redox zones for treatment of organics and inorganics. Hydraulic fracturing methods offer a mechanism for the in-situ treatment of gently dipping layers of reactive compounds. Specialized methods using real-time monitoring and a high-energy jet during fracturing allow the form of the fracture to be influenced, such as creation of assymmetric fractures beneath potential sources (i.e. tanks, pits, buildings) that should not be penetrated by boring. Some examples of field applications of this technique such as creating fractures filled with zero-valent iron to reductively dechlorinate halogenated hydrocarbons, and the use of granular activated carbon to adsorb compounds are discussed

  1. In situ sampling cart development engineering task plan

    International Nuclear Information System (INIS)

    DeFord, D.K.

    1995-01-01

    This Engineering Task Plan (ETP) supports the development for facility use of the next generation in situ sampling system for characterization of tank vapors. In situ sampling refers to placing sample collection devices (primarily sorbent tubes) directly into the tank headspace, then drawing tank gases through the collection devices to obtain samples. The current in situ sampling system is functional but was not designed to provide the accurate flow measurement required by today's data quality objectives (DQOs) for vapor characterization. The new system will incorporate modern instrumentation to achieve much tighter control. The next generation system will be referred to in this ETP as the New In Situ System (NISS) or New System. The report describes the current sampling system and the modifications that are required for more accuracy

  2. In situ Transesterification of Microalgal Oil to Produce Algal Biodiesel

    Science.gov (United States)

    2012-06-01

    This research was to process whole microalgae cells for biodiesel production without first extracting lipids. The ultimate : goal is develop a novel process for algal biodiesel production directly from microalgae cells in a single step, i.e., in situ...

  3. Advanced Water Purification System For In Situ Resource Utilization

    Data.gov (United States)

    National Aeronautics and Space Administration — A main goal in the field of In Situ Resource Utilization (ISRU) is to develop technologies that produce oxygen from regolith to provide consumables to an...

  4. Compact laser for in-situ compositional analysis, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — In response to NASA's solicitation for light-weight and power efficient instruments that enable in situ compositional analysis, Q-Peak in partnership with the...

  5. Compact Laser for In-Situ Compositional Analysis, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — In response to NASA's solicitation for light-weight and power efficient instruments that enable in situ compositional analysis, Q-Peak in partnership with the...

  6. OceanSITES RAMA daily in-situ data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — OceanSITES daily in-situ data. OceanSITES Global Tropical Moored Buoy Array Research Moored Array for African-Asian-Australian Monsoon Analysis and Prediction (RAMA)...

  7. Cytogenetic, genomic in situ hybridization (GISH) and agronomic ...

    African Journals Online (AJOL)

    F3 generations of a wheat-Psathyrostachys huashanica intergeneric cross. Their agronomic traits were evaluated in the field and their meiotic behaviors and chromosome composition were analyzed by cytogenetic and GISH (genomic in situ ...

  8. In situ bioremediation of chlorinated solvent with natural gas

    International Nuclear Information System (INIS)

    Rabold, D.E.

    1996-01-01

    A bioremediation system for the removal of chlorinated solvents from ground water and sediments is described. The system involves the the in-situ injection of natural gas (as a microbial nutrient) through an innovative configuration of horizontal wells

  9. In situ quantification of genomic instability in breast cancer progression

    Energy Technology Data Exchange (ETDEWEB)

    Ortiz de Solorzano, Carlos; Chin, Koei; Gray, Joe W.; Lockett, Stephen J.

    2003-05-15

    Genomic instability is a hallmark of breast and other solid cancers. Presumably caused by critical telomere reduction, GI is responsible for providing the genetic diversity required in the multi-step progression of the disease. We have used multicolor fluorescence in situ hybridization and 3D image analysis to quantify genomic instability cell-by-cell in thick, intact tissue sections of normal breast epithelium, preneoplastic lesions (usual ductal hyperplasia), ductal carcinona is situ or invasive carcinoma of the breast. Our in situ-cell by cell-analysis of genomic instability shows an important increase of genomic instability in the transition from hyperplasia to in situ carcinoma, followed by a reduction of instability in invasive carcinoma. This pattern suggests that the transition from hyperplasia to in situ carcinoma corresponds to telomere crisis and invasive carcinoma is a consequence of telomerase reactivation afertelomere crisis.

  10. [Investigation of fibrous cultural materials by infrared spectroscopy].

    Science.gov (United States)

    Luo, Xi-yun; Du, Yi-ping; Shen, Mei-hua; Zhang, Wen-qing; Zhou, Xin-guang; Fang, Shu-ying; Zhang, Xuan

    2015-01-01

    Cultural fibrous material includes both important categories, i. e. textile and paper, consisting of precious cultural materials in museum, such as costume, painting, and manuscript. In recent years more and more connoisseur and conservator's concerns are, through nondestructive method, the authenticity and the ageing identification of these cultural relics especially made from fragile materials. In this research, we used attenuated total reflection infrared spectroscopy to identify five traditional textile fibers, alongside cotton, linen, wool, mulberry silk and tussah silk, and another five paper fibers alongside straw, wheat straw, long qisong, Chinese alpine rush and mulberry bar, which are commonly used for making Chinese traditional xuan paper. The research result showed that the animal fiber (wool, mulberry silk and tussah silk) and plant fiber (cotton and linen) were easier to be distinguished by comparing the peaks at 3 280 cm-1 belonging to NH stretching vibration and a serious peaks related to amide I to amide III. In the spectrum of wool, the peak at 1 076 cm-1 was assigned to the S-O stretching vibration absorption of cystine in wool structure and can be used to tell wool from silk. The spectrum of mulberry silk and tussah silk seems somewhat difficult to be identified, as well as the spectrum of cotton and linen. Five rural paper fibers all have obvious characteristic peaks at 3 330, 2 900 cm-1 which are related to OH and CH stretching vibration. In the fingerprint wavenumber range of 1 600 - 800 cm, the similar peaks also appeared at 1 370, 1 320 cm-1 and 1 162, 1 050 cm-1, both group peaks respectively are related to CH and CO vibration in the structure of cellulose and hemicellulose in paper fibers. Although there is more similarity of the infrared spectroscopy of these 5 paper fibers, some tiny difference in absorbance also can be found at 3 300 cm-1 and in the fingerprint range at 1 332, 1 203, and 1 050 cm-1 which are related to C-O-C vibration

  11. Improved lifetime of new fibrous carbon/ceramic composites

    Science.gov (United States)

    Gumula, Teresa

    2018-03-01

    New carbon/ceramic composites have been synthesized from low-cost phenol-formaldehyde resin and polysiloxane preceram. A reference carbon composite reinforced with carbon fibre (CC composite) is obtained in first place from a carbon fibre roving impregnated with a solution of phenol-formaldehyde resin in isopropyl alcohol. To obtain fibrous carbon/ceramic composites the CC perform is impregnated with polymethylphenylsiloxane polymer and then a thermal treatment in an inert atmosphere is applied. Depending on the temperature of this process, the resulting ceramics can be silicon carbide (SiC) or silicon oxycarbide (SiCO). Three representative samples, named CC/SiCO( a) (obtained at 1000 °C), CC/SiCO( b) (1500 °C) and CC/SiC (1700 °C), have been tested for fatigue behaviour and oxidation resistance. The value of the Young's modulus remains constant in fatigue tests done in flexion mode for the three new composites during a high number of cycles until sudden degradation begins. This is an unusual and advantageous characteristic for this type of materials and results in the absence of delamination during the measurements. In contrast, the CC reference composite shows a progressive degradation of the Young's modulus accompanied by delamination. SEM micrographs revealed that the formation of filaments of submicrometer diameter during the heat treatment can be responsible for the improved behaviour of these composites. The CC/SiC composite shows the best oxidation resistance among the three types of composites, with a 44% mass loss after 100 h of oxidation.

  12. Remediation of SRS Basins by In Situ Stabilization/Solidification

    International Nuclear Information System (INIS)

    Ganguly, A.

    1999-01-01

    In the late summer of 1998, the Savannah River Site began remediation of two radiologically contaminated basins using in situ stabilization. These two high-risk, unlined basins contain radiological contaminants, which potentially pose significant risks to human health and the environment. The selected remedy involves in situ stabilization/solidification of the contaminated wastes (basin and pipeline soils, pipelines, vegetation, and other debris) followed by installation of a low permeability soil cover

  13. Characterization of VPO ammoxidation catalysts by in situ methods

    Energy Technology Data Exchange (ETDEWEB)

    Martin, A.; Luecke, B.; Brueckner, A.; Steinike, U. [Institut fuer Angewandte Chemie Berlin-Adlershof e.V., Berlin (Germany); Brzezinka, K.W. [Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin (Germany); Meisel, M. [Humboldt-Universitaet, Berlin (Germany). Inst. fuer Chemie

    1998-12-31

    In-situ methods are well known as powerful tools in studying catalyst formation processes, their solid state properties under working conditions and the interaction with the feed, intermediates and products to reveal reaction mechanisms. This paper gives a short overview on results of intense studies using in-situ techniques to reveal VPO catalyst generation processes, interaction of educts, intermediates and products with VPO catalyst surfaces and mechanistic insights. Catalytic data of the ammoxidation of toluene on different VPOs complete these findings. The precursor-catalyst transformation processes were preferently investigated by in-situ XRD, in-situ Raman and in-situ ESR spectroscopy. The interaction of aromatic molecules and intermediates, resp., and VPO solid surfaces was followed by in-situ ESR and in-situ FTIR spectroscopy. Mechanistic information was mainly obtained using in-situ FTIR spectroscopy and the temporal-analysis-of-products (TAP) technique. Catalytic studies were carried out in a fixed-bed microreactor on pure (NH{sub 4}){sub 2}(VO){sub 3}(P{sub 2}O{sub 7}){sub 2}, generated [(NH{sub 4}){sub 2}(VO{sub 3})(P{sub 2}O{sub 7}){sub 2}+V{sub x}O{sub y}] catalysts, having different V{sub x}O{sub y} proportions by use of VOHPO{sub 4} x 1/2H{sub 2}O (V/P=1) and recently studied (VO){sub 3}(PO{sub 4}){sub 2} x 7 H{sub 2}O (V/P=1.5) precursors; the well-known (VO){sub 2}P{sub 2}O{sub 7} was used for comparison. (orig.)

  14. Matrix diffusion model. In situ tests using natural analogues

    International Nuclear Information System (INIS)

    Rasilainen, K.

    1997-11-01

    Matrix diffusion is an important retarding and dispersing mechanism for substances carried by groundwater in fractured bedrock. Natural analogues provide, unlike laboratory or field experiments, a possibility to test the model of matrix diffusion in situ over long periods of time. This thesis documents quantitative model tests against in situ observations, done to support modelling of matrix diffusion in performance assessments of nuclear waste repositories

  15. Matrix diffusion model. In situ tests using natural analogues

    Energy Technology Data Exchange (ETDEWEB)

    Rasilainen, K. [VTT Energy, Espoo (Finland)

    1997-11-01

    Matrix diffusion is an important retarding and dispersing mechanism for substances carried by groundwater in fractured bedrock. Natural analogues provide, unlike laboratory or field experiments, a possibility to test the model of matrix diffusion in situ over long periods of time. This thesis documents quantitative model tests against in situ observations, done to support modelling of matrix diffusion in performance assessments of nuclear waste repositories. 98 refs. The thesis includes also eight previous publications by author.

  16. Polypropylene/graphite nanocomposites by in situ polymerization

    International Nuclear Information System (INIS)

    Milani, Marceo A.; Galland, Giselda B.; Quijada, Raul

    2011-01-01

    This work presents the synthesis of nanocomposites of polypropylene/graphite by in situ polymerization using metallocene catalyst and graphene nanosheets. Initially was analyzed which of the metallocene catalysts rac-Et(Ind) 2 ZrCl 2 or rac-Me 2 Si(Ind) 2 ZrCl 2 produces polypropylene with mechanical properties more relevant. Then it were performed the in situ polymerization reactions to obtain the nanocomposites. The polymeric materials were characterized by XRD, DSC, GPC and DMTA. (author)

  17. Model and calculation of in situ stresses in anisotropic formations

    Energy Technology Data Exchange (ETDEWEB)

    Yuezhi, W.; Zijun, L.; Lixin, H. [Jianghan Petroleum Institute, (China)

    1997-08-01

    In situ stresses in transversely isotropic material in relation to wellbore stability have been investigated. Equations for three horizontal in- situ stresses and a new formation fracture pressure model were described, and the methodology for determining the elastic parameters of anisotropic rocks in the laboratory was outlined. Results indicate significantly smaller differences between theoretically calculated pressures and actual formation pressures than results obtained by using the isotropic method. Implications for improvements in drilling efficiency were reviewed. 13 refs., 6 figs.

  18. Next-generation in-situ science concepts and technology

    Science.gov (United States)

    Muirhead, Brian; Varsi, Giulio

    1990-01-01

    This paper discusses the concepts of a next-generation in situ science program, named Sample Acquisition, Analysis, and Preservation (SAAP), established by NASA to develop critical technologies for remote identification, acquisition, processing, analysis, and preservation of materials for the in situ science, engineering characterization, and earth return. Special attention is given to the SAAP architecture, system design, remote sensing system, sample acquisition system, and methods for sample analysis. A diagram of the SAAP preliminary system conceptual design is included.

  19. In-Situ U–Pb Dating of Apatite by Hiroshima-SHRIMP: Contributions to Earth and Planetary Science

    Science.gov (United States)

    Terada, Kentaro; Sano, Yuji

    2012-01-01

    The Sensitive High Resolution Ion MicroProbe (SHRIMP) is the first ion microprobe dedicated to geological isotopic analyses, especially in-situ analyses related to the geochronology of zircon. Such a sophisticated ion probe, which can attain a high sensitivity at a high mass resolution, based on a double focusing high mass-resolution spectrometer, designed by Matsuda (1974), was constructed at the Australian National University. In 1996, such an instrument was installed at Hiroshima University and was the first SHRIMP to be installed in Japan. Since its installation, our focus has been on the in-situ U–Pb dating of the mineral apatite, as well as zircon, which is a more common U-bearing mineral. This provides the possibility for extending the use of in-situ U–Pb dating from determining the age of formation of volcanic, granitic, sedimentary and metamorphic minerals to the direct determination of the diagenetic age of fossils and/or the crystallization age of various meteorites, which can provide new insights into the thermal history on the Earth and/or the Solar System. In this paper, we review the methodology associated with in-situ apatite dating and our contribution to Earth and Planetary Science over the past 16 years. PMID:24349912

  20. In-Situ U-Pb Dating of Apatite by Hiroshima-SHRIMP: Contributions to Earth and Planetary Science.

    Science.gov (United States)

    Terada, Kentaro; Sano, Yuji

    2012-01-01

    The Sensitive High Resolution Ion MicroProbe (SHRIMP) is the first ion microprobe dedicated to geological isotopic analyses, especially in-situ analyses related to the geochronology of zircon. Such a sophisticated ion probe, which can attain a high sensitivity at a high mass resolution, based on a double focusing high mass-resolution spectrometer, designed by Matsuda (1974), was constructed at the Australian National University. In 1996, such an instrument was installed at Hiroshima University and was the first SHRIMP to be installed in Japan. Since its installation, our focus has been on the in-situ U-Pb dating of the mineral apatite, as well as zircon, which is a more common U-bearing mineral. This provides the possibility for extending the use of in-situ U-Pb dating from determining the age of formation of volcanic, granitic, sedimentary and metamorphic minerals to the direct determination of the diagenetic age of fossils and/or the crystallization age of various meteorites, which can provide new insights into the thermal history on the Earth and/or the Solar System. In this paper, we review the methodology associated with in-situ apatite dating and our contribution to Earth and Planetary Science over the past 16 years.

  1. Is the double cross flap technique the panacea for avoiding fistula ...

    African Journals Online (AJOL)

    Patients and methods Between October 2005 and September 2014 a total of 127 children with distal and midshaft primary hypospadias underwent tubularized incised plate urethroplasty by means of a double dartos flap obtained with a double cross flap to protect the neourethra. A Foley catheter was left in situ for 7 days.

  2. In situ leaching of uranium: Technical, environmental and economic aspects

    International Nuclear Information System (INIS)

    1989-01-01

    Within the framework of its activities in nuclear raw materials the International Atomic Energy Agency has convened a series of meetings to discuss various aspects of uranium ore processing technology, recovery of uranium from non-conventional resources and development of projects for the production of uranium concentrates including economic aspects. As part of this continuing effort to discuss and document important aspects of uranium production the IAEA convened a Technical Committee Meeting on Technical, Economic and Environmental Aspects of In-Situ Leaching. Although the use of this technique is limited by geological and economic constraints, it has a significant potential to produce uranium at competitive prices. This is especially important in the current uranium market which is mainly characterised by large inventories, excess production capability and low prices. This situation is not expected to last indefinitely but it is unlikely to change drastically in the next ten years or so. This Technical Committee Meeting was held in Vienna from 3 to 6 November 1987 with the attendance of 24 participants from 12 countries. Eight papers were presented. Technical sessions covered in-situ mining research, environmental and licensing aspects and restoration of leached orebodies; the technological status of in-situ leaching, the current status and future prospects of in-situ leaching of uranium in Member States, general aspects of planning and implementation of in-situ projects and the economics of in-situ leaching. Refs, figs and tabs

  3. In-situ diffusion in granite: results from scoping experiments

    International Nuclear Information System (INIS)

    Cramer, J.J.; Melynk, T.W.; Miller, H.G.

    1997-03-01

    This report describes the scoping experiments carried out, both in the laboratory and in-situ at a depth of ∼450 m in the Underground Research Laboratory, for the study to determine the diffusion parameters of intact granite/granodiorite under natural high-stress conditions. The study includes four in-situ diffusion experiments (one each in four separate boreholes with experiment times from six months to two years), and supporting laboratory experiments. Tentative conclusions from the first 203-day in-situ experiment in hole DIF4 indicate that the in-situ tortuosity value of granodiorite under high stress conditions may be significantly higher than those obtained from measurements on the same rock under ambient conditions in the laboratory. Because problems were encountered during drilling of the in-situ sample core, potentially adversely affecting the analytical data, further work needs to be carried out to substantiate these tentative conclusions. Tortuosity values obtained in the laboratory for de-stressed rock from the in-situ experiment zones range between 2.4 and 4.6, falling well within the range of tortuosity values reported by Davison et al. (1994) that were used for the assessment modelling of the reference disposal system (Goodwin et al. 1994). The granodiorite samples have lower tortuosity values (between 2.4 and 3.9) compared with that of the single granite sample (4.6). (author)

  4. IN SITU FIELD TESTING OF PROCESSES

    Energy Technology Data Exchange (ETDEWEB)

    J.S.Y. YANG

    2004-11-08

    The purpose of this scientific analysis report is to update and document the data and subsequent analyses from ambient field-testing activities performed in underground drifts and surface-based boreholes through unsaturated zone (UZ) tuff rock units. In situ testing, monitoring, and associated laboratory studies are conducted to directly assess and evaluate the waste emplacement environment and the natural barriers to radionuclide transport at Yucca Mountain. This scientific analysis report supports and provides data to UZ flow and transport model reports, which in turn contribute to the Total System Performance Assessment (TSPA) of Yucca Mountain, an important document for the license application (LA). The objectives of ambient field-testing activities are described in Section 1.1. This report is the third revision (REV 03), which supercedes REV 02. The scientific analysis of data for inputs to model calibration and validation as documented in REV 02 were developed in accordance with the Technical Work Plan (TWP) ''Technical Work Plan for: Performance Assessment Unsaturated Zone'' (BSC 2004 [DIRS 167969]). This revision was developed in accordance with the ''Technical Work Plan for: Unsaturated Zone Flow Analysis and Model Report Integration'' (BSC 2004 [DIRS 169654], Section 1.2.4) for better integrated, consistent, transparent, traceable, and more complete documentation in this scientific analysis report and associated UZ flow and transport model reports. No additional testing or analyses were performed as part of this revision. The list of relevant acceptance criteria is provided by ''Technical Work Plan for: Unsaturated Zone Flow Analysis and Model Report Integration'' (BSC 2004 [DIRS 169654]), Table 3-1. Additional deviations from the TWP regarding the features, events, and processes (FEPs) list are discussed in Section 1.3. Documentation in this report includes descriptions of how, and under what

  5. IN SITU FIELD TESTING OF PROCESSES

    International Nuclear Information System (INIS)

    YANG, J.S.Y.

    2004-01-01

    The purpose of this scientific analysis report is to update and document the data and subsequent analyses from ambient field-testing activities performed in underground drifts and surface-based boreholes through unsaturated zone (UZ) tuff rock units. In situ testing, monitoring, and associated laboratory studies are conducted to directly assess and evaluate the waste emplacement environment and the natural barriers to radionuclide transport at Yucca Mountain. This scientific analysis report supports and provides data to UZ flow and transport model reports, which in turn contribute to the Total System Performance Assessment (TSPA) of Yucca Mountain, an important document for the license application (LA). The objectives of ambient field-testing activities are described in Section 1.1. This report is the third revision (REV 03), which supercedes2. The scientific analysis of data for inputs to model calibration and validation as documented in2 were developed in accordance with the Technical Work Plan (TWP) ''Technical Work Plan for: Performance Assessment Unsaturated Zone'' (BSC 2004 [DIRS 167969]). This revision was developed in accordance with the ''Technical Work Plan for: Unsaturated Zone Flow Analysis and Model Report Integration'' (BSC 2004 [DIRS 169654], Section 1.2.4) for better integrated, consistent, transparent, traceable, and more complete documentation in this scientific analysis report and associated UZ flow and transport model reports. No additional testing or analyses were performed as part of this revision. The list of relevant acceptance criteria is provided by ''Technical Work Plan for: Unsaturated Zone Flow Analysis and Model Report Integration'' (BSC 2004 [DIRS 169654]), Table 3-1. Additional deviations from the TWP regarding the features, events, and processes (FEPs) list are discussed in Section 1.3. Documentation in this report includes descriptions of how, and under what conditions, the tests were conducted. The descriptions and analyses

  6. In situ deformations in the immature brain during rapid rotations.

    Science.gov (United States)

    Ibrahim, Nicole G; Natesh, Rahul; Szczesny, Spencer E; Ryall, Karen; Eucker, Stephanie A; Coats, Brittany; Margulies, Susan S

    2010-04-01

    Head trauma is the leading cause of death and debilitating injury in children. Computational models are important tools used to understand head injury mechanisms but they must be validated with experimental data. In this communication we present in situ measurements of brain deformation during rapid, nonimpact head rotation in juvenile pigs of different ages. These data will be used to validate computational models identifying age-dependent thresholds of axonal injury. Fresh 5 days (n=3) and 4 weeks (n=2) old piglet heads were transected horizontally and secured in a container. The cut surface of each brain was marked and covered with a transparent, lubricated plate that allowed the brain to move freely in the plane of rotation. For each brain, a rapid (20-28 ms) 65 deg rotation was applied sequentially at 50 rad/s, 75 rad/s, and 75 rad/s. Each rotation was digitally captured at 2500 frames/s (480x320 pixels) and mark locations were tracked and used to compute strain using an in-house program in MATLAB. Peak values of principal strain (E(peak)) were significantly larger during deceleration than during acceleration of the head rotation (p<0.05), and doubled with a 50% increase in velocity. E(peak) was also significantly higher during the second 75 rad/s rotation than during the first 75 rad/s rotation (p<0.0001), suggesting structural alteration at 75 rad/s and the possibility that similar changes may have occurred at 50 rad/s. Analyzing only lower velocity (50 rad/s) rotations, E(peak) significantly increased with age (16.5% versus 12.4%, p<0.003), which was likely due to the larger brain mass and smaller viscoelastic modulus of the 4 weeks old pig brain compared with those of the 5 days old. Strain measurement error for the overall methodology was estimated to be 1%. Brain tissue strain during rapid, nonimpact head rotation in the juvenile pig varies significantly with age. The empirical data presented will be used to validate computational model predictions of

  7. In situ management and domestication of plants in Mesoamerica.

    Science.gov (United States)

    Casas, Alejandro; Otero-Arnaiz, Adriana; Pérez-Negrón, Edgar; Valiente-Banuet, Alfonso

    2007-11-01

    Ethnobotanical studies in Mexico have documented that Mesoamerican peoples practise systems of in situ management of wild and weedy vegetation directed to control availability of useful plants. In situ management includes let standing, encouraging growing and protection of individual plants of useful species during clearance of vegetation, which in some cases may involve artificial selection. The aim of this study was to review, complement and re-analyse information from three case studies which examined patterns of morphological, physiological and genetic effects of artificial selection in plant populations under in situ management in the region. Information on wild and in situ managed populations of the herbaceous weedy plants Anoda cristata and Crotalaria pumila, the tree Leucaena esculenta subsp. esculenta and the columnar cacti Escontria chiotilla, Polaskia chichipe and Stenocereus stellatus from Central Mexico was re-analysed. Analyses compared morphology and frequency of morphological variants, germination patterns, and population genetics parameters between wild and managed in situ populations of the species studied. Species of columnar cacti are under different management intensities and their populations, including cultivated stands of P. chichipe and S. stellatus, were also compared between species. Significant differences in morphology, germination patterns and genetic variation documented between wild, in situ managed and cultivated populations of the species studied are associated with higher frequencies of phenotypes favoured by humans in managed populations. Genetic diversity in managed populations of E. chiotilla and P. chichipe is slightly lower than in wild populations but in managed populations of S. stellatus variation was higher than in the wild. However, genetic distance between populations was generally small and influenced more by geographic distance than by management. Artificial selection operating on in situ managed populations of the

  8. Double ambidexterity

    DEFF Research Database (Denmark)

    Kaulio, Matti; Thorén, Kent; Rohrbeck, René

    2017-01-01

    We leverage the business model innovation and ambidexterity literature to investigate a contradictory case, the Swedish-Finnish Telecom operator TeliaSonera. Despite being challenged by three major disruptions, the company not only still exists but also enjoys remarkably good financial performance...... this behaviour as double ambidexterity. We use an in-depth case study to conceptualize double ambidexterity and discuss its impact on the business's survival and enduring success........ Building on extant archival data and interviews, we carefully identify and map 26 organizational responses during 1992–2016. We find that the firm has overcome three critical phases by experimenting and pioneering with portfolios of business models and/or technological innovations. We describe...

  9. Double Chooz

    Energy Technology Data Exchange (ETDEWEB)

    Buck, Christian [Max-Planck-Institut fuer Kernphysik, Saupfercheckweg 1, D-69117 Heidelberg (Germany)

    2006-05-15

    The goal of the Double Chooz reactor neutrino experiment is to search for the neutrino mixing parameter {theta}{sub 13}. Double Chooz will use two identical detectors at 150 m and 1.05 km distance from the reactor cores. The near detector is used to monitor the reactor {nu}-bar {sub e} flux while the second is dedicated to the search for a deviation from the expected (1/distance){sup 2} behavior. This two detector concept will allow a relative normalization systematic error of ca. 0.6 %. The expected sensitivity for sin{sup 2}2{theta}{sub 13} is then in the range 0.02 - 0.03 after three years of data taking. The antineutrinos will be detected in a liquid scintillator through the capture on protons followed by a gamma cascade, produced by the neutron capture on Gd.

  10. Breeding of in-situ Petroleum Degrading Bacteria in Hangzhou Bay and evaluating for the In-situ repair effect

    Science.gov (United States)

    Lan, Ru; Lin, Hai; Qiao, Bing; Dong, Yingbo; Zhang, Wei; Chang, Wen

    2018-02-01

    In this paper, the restoration behaviour of the in-situ microorganisms in seawater and sediments to the marine accident oil spill was researched. The experimental study on the breeding of in-situ petroleum-degrading bacteria in the seawater and sediments of Hangzhou Bay and the restoration of oil spill were carried out. Making use of the reinforced microbial flora, combined with physical and chemical methods in field environment, petroleum degrading and restoration experiment were performed, the effect of the breeding of in-situ degrading bacteria was evaluated, and the standard process of in-situ bacteria sampling, laboratory screening, domestication and degradation efficiency testing were formed. This study laid a foundation for further evaluation of the advantages and disadvantages for the petroleum-degrading bacteria of Hangzhou Bay during the process of in-situ restoration. The results showed that in-situ microbes of Hangzhou Bay could reach the growth peak in 5 days with the suitable environmental factors and sufficient nutrient elements, and the degradation efficiency could reach 65.2% (or 74.8% after acclimation). And also the microbes could adapt to the local sea water and environmental conditions, with a certain degree of degradation. The research results could provide parameter support for causal judgment and quantitative assessment of oil spill damage.

  11. Synthesis and in situ mechanism of nuclei growth of layered double ...

    Indian Academy of Sciences (India)

    Administrator

    MII and MIII salts, the MII/MIII ratio and the interlayer anion on the crystallinity and morphology of the co- .... pH, aging time, aging temperature and metal ion concen- tration, particles are nucleated in various molar concen- .... tration on the solid solubility of metal hydroxides. Again, in some cases, LDHs platelets tend to form ...

  12. Electrochemical Doping of Double Walled Carbon Nanotubes: An In situ Raman Spectroelectrochemical Study

    Czech Academy of Sciences Publication Activity Database

    Kavan, Ladislav; Kalbáč, Martin; Zukalová, Markéta; Krause, M.; Dunsch, L.

    2004-01-01

    Roč. 5, č. 2 (2004), s. 274-277 ISSN 1439-4235 R&D Projects: GA AV ČR IAA4040306; GA AV ČR KSK4040110 Keywords : Raman spectroscopy * fullerenes * spectroelectrochemistry Subject RIV: CG - Electrochemistry Impact factor: 3.596, year: 2004

  13. Method of preparing and applying single stranded DNA probes to double stranded target DNAs in situ

    Science.gov (United States)

    Gray, J.W.; Pinkel, D.

    1991-07-02

    A method is provided for producing single stranded non-self-complementary nucleic acid probes, and for treating target DNA for use therewith. The probe is constructed by treating DNA with a restriction enzyme and an exonuclease to form template/primers for a DNA polymerase. The digested strand is resynthesized in the presence of labeled nucleoside triphosphate precursor. Labeled single stranded fragments are separated from the resynthesized fragments to form the probe. Target DNA is treated with the same restriction enzyme used to construct the probe, and is treated with an exonuclease before application of the probe. The method significantly increases the efficiency and specificity of hybridization mixtures by increasing effective probe concentration by eliminating self-hybridization between both probe and target DNAs, and by reducing the amount of target DNA available for mismatched hybridizations. No Drawings

  14. Synthesis and in situ mechanism of nuclei growth of layered double ...

    Indian Academy of Sciences (India)

    Administrator

    Al-CO3 LDHs systems by varying the molar concentration of metal ions. For a particular metal ion concentration, we qualitatively investigated the growth behaviour of nanocrystals upon varying the synthesis parameters. In our studies we no-.

  15. In situ rheology and gas volume in Hanford double-shell waste tanks

    Energy Technology Data Exchange (ETDEWEB)

    Stewart, C.W.; Alzheimer, J.M.; Brewster, M.E.; Chen, G.; Reid, H.C.; Shepard, C.L.; Terrones, G. [Pacific Northwest National Lab., Richland, WA (United States); Mendoza, R.E. [Westinghouse Hanford Co., Richland, WA (United States)

    1996-09-01

    This report is a detailed characterization of gas retention and release in 6 Hanford DS waste tanks. The results came from the ball rheometer and void fraction instrument in (flammable gas watch list) tanks SY-101, SY-103, AW-101, AN-103, AN-104, and AN-105 are presented. Instrument operation and derivation of data reduction methods are presented. Gas retention and release information is summarized for each tank and includes tank fill history and instrumentation, waste configuration, gas release, void fraction distribution, gas volumes, rheology, and photographs of the waste column from extruded core samples. Potential peak burn pressure is computed as a function of gas release fraction to portray the `hazard signature` of each tank. It is shown that two tanks remain well below the maximum allowable pressure, even if the entire gas content were released and ignited, and that none of the others present a hazard with their present gas release behavior.

  16. In situ rheology and gas volume in Hanford double-shell waste tanks

    International Nuclear Information System (INIS)

    Stewart, C.W.; Alzheimer, J.M.; Brewster, M.E.; Chen, G.; Reid, H.C.; Shepard, C.L.; Terrones, G.; Mendoza, R.E.

    1996-09-01

    This report is a detailed characterization of gas retention and release in 6 Hanford DS waste tanks. The results came from the ball rheometer and void fraction instrument in (flammable gas watch list) tanks SY-101, SY-103, AW-101, AN-103, AN-104, and AN-105 are presented. Instrument operation and derivation of data reduction methods are presented. Gas retention and release information is summarized for each tank and includes tank fill history and instrumentation, waste configuration, gas release, void fraction distribution, gas volumes, rheology, and photographs of the waste column from extruded core samples. Potential peak burn pressure is computed as a function of gas release fraction to portray the 'hazard signature' of each tank. It is shown that two tanks remain well below the maximum allowable pressure, even if the entire gas content were released and ignited, and that none of the others present a hazard with their present gas release behavior

  17. In situ vitrification: application analysis for stabilization of transuranic waste

    Energy Technology Data Exchange (ETDEWEB)

    Oma, K.H.; Farnsworth, R.K.; Rusin, J.M.

    1982-09-01

    The in situ vitrification process builds upon the electric melter technology previously developed for high-level waste immobilization. In situ vitrification converts buried wastes and contaminated soil to an extremely durable glass and crystalline waste form by melting the materials, in place, using joule heating. Once the waste materials have been solidified, the high integrity waste form should not cause future ground subsidence. Environmental transport of the waste due to water or wind erosion, and plant or animal intrusion, is minimized. Environmental studies are currently being conducted to determine whether additional stabilization is required for certain in-ground transuranic waste sites. An applications analysis has been performed to identify several in situ vitrification process limitations which may exist at transuranic waste sites. Based on the process limit analysis, in situ vitrification is well suited for solidification of most in-ground transuranic wastes. The process is best suited for liquid disposal sites. A site-specific performance analysis, based on safety, health, environmental, and economic assessments, will be required to determine for which sites in situ vitrification is an acceptable disposal technique. Process economics of in situ vitrification compare favorably with other in-situ solidification processes and are an order of magnitude less than the costs for exhumation and disposal in a repository. Leachability of the vitrified product compares closely with that of Pyrex glass and is significantly better than granite, marble, or bottle glass. Total release to the environment from a vitrified waste site is estimated to be less than 10/sup -5/ parts per year. 32 figures, 30 tables.

  18. Upper Urinary Tract Carcinoma In Situ: Current Knowledge, Future Direction.

    Science.gov (United States)

    Redrow, Grant P; Guo, Charles C; Brausi, Maurizio A; Coleman, Jonathan A; Fernandez, Mario I; Kassouf, Wassim; Keeley, Francis X; Margulis, Vitaly; Raman, Jay D; Roupret, Morgan; Shariat, Shahrokh F; Spiess, Philippe E; Thalmann, George N; Matin, Surena F

    2017-02-01

    Carcinoma in situ of the urinary tract is a high grade form of nonmuscle invasive urothelial cancer. Our understanding of this entity in the upper tract is poor, and case management remains challenging due to knowledge gaps regarding the definition, diagnosis, treatment options and followup of the disease. We reviewed the available literature for similarities and differences between bladder and upper tract carcinoma in situ, and herein summarize the best available data. We reviewed PubMed® and MEDLINE™ databases from January 1976 through September 2014. The PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) statement was used to screen publications. All authors participated in the development of a consensus definition of disease. A total of 61 publications were found suitable for this review. All studies were retrospective. Compared to bladder carcinoma in situ, upper tract carcinoma in situ appears to have lower progression rates and improved survival. All available studies demonstrate topical therapy to be effective in treating upper tract carcinoma in situ, with decreased recurrence rates compared to bladder carcinoma in situ. Highlighted areas of current knowledge gaps include variable definitions of disease, methods of drug delivery and ideal treatment course. Improving methods for detection may allow easier diagnosis and more effective treatment. Based on the available data, organ preserving therapy with topical agents is an alternative to radical surgery in select patients with upper tract carcinoma in situ, although this method has not been evaluated in prospective trials. A paradigm shift regarding detection and treatment is needed to improve care and allow better renal preservation. A consensus definition of the disease is offered, and several areas of major knowledge gaps and opportunities for future research are identified. Copyright © 2017 American Urological Association Education and Research, Inc. Published by Elsevier

  19. In situ vitrification: application analysis for stabilization of transuranic waste

    International Nuclear Information System (INIS)

    Oma, K.H.; Farnsworth, R.K.; Rusin, J.M.

    1982-09-01

    The in situ vitrification process builds upon the electric melter technology previously developed for high-level waste immobilization. In situ vitrification converts buried wastes and contaminated soil to an extremely durable glass and crystalline waste form by melting the materials, in place, using joule heating. Once the waste materials have been solidified, the high integrity waste form should not cause future ground subsidence. Environmental transport of the waste due to water or wind erosion, and plant or animal intrusion, is minimized. Environmental studies are currently being conducted to determine whether additional stabilization is required for certain in-ground transuranic waste sites. An applications analysis has been performed to identify several in situ vitrification process limitations which may exist at transuranic waste sites. Based on the process limit analysis, in situ vitrification is well suited for solidification of most in-ground transuranic wastes. The process is best suited for liquid disposal sites. A site-specific performance analysis, based on safety, health, environmental, and economic assessments, will be required to determine for which sites in situ vitrification is an acceptable disposal technique. Process economics of in situ vitrification compare favorably with other in-situ solidification processes and are an order of magnitude less than the costs for exhumation and disposal in a repository. Leachability of the vitrified product compares closely with that of Pyrex glass and is significantly better than granite, marble, or bottle glass. Total release to the environment from a vitrified waste site is estimated to be less than 10 -5 parts per year. 32 figures, 30 tables

  20. [Hypoglycemia induced by a solitary fibrous tumor of the lung or Doege-Potter syndrome: Report of one case].

    Science.gov (United States)

    Soutelo, Jimena; Moldes, Sofía; Martin, Ayelén; Lutfi, Rubén; Leal Reyna, Mariela

    2016-01-01

    We report the case of a 75-year-old man who was admitted to the hospital with symptoms of severe hypoglycemia. He had a history of solitary fibrous tumor diagnosed by Pathology after its complete surgical resection eight years before. The laboratory examination reported hypoglycemia with inhibited Insulin secretion. A computed tomography of the thorax revealed a large solid heterogeneous mass in the left hemithorax. Solitary fibrous tumor is a rare neoplasm. The association of solitary fibrous tumor and paraneoplastic hypoglycemia is known as Doege-Potter syndrome and occurs in less than 5% of all solitary fibrous tumors.

  1. Fibrous Support Stabilizes Nitrification Performance of a Membrane-Aerated Biofilm: The Effect of Liquid Flow Perturbation

    DEFF Research Database (Denmark)

    Terada, Akihiko; Ito, J; Matsumoto, S

    2009-01-01

    Nitrification stability and biofilm robustness were examined by comparing a fibrous support membrane-aerated biofilm reactor (FS-MABR), where a woven fibrous support was surrounded on a silicone tube, with an MABR. The overall mass transfer coefficient of oxygen for the FS-MABR, assuming no bound......Nitrification stability and biofilm robustness were examined by comparing a fibrous support membrane-aerated biofilm reactor (FS-MABR), where a woven fibrous support was surrounded on a silicone tube, with an MABR. The overall mass transfer coefficient of oxygen for the FS-MABR, assuming...

  2. In situ testing to determination field-saturated hydraulic conductivity of UMTRA Project disposal cell covers, liners, and foundation areas

    International Nuclear Information System (INIS)

    1994-02-01

    This special study was conducted to prepare a guidance document for selecting in situ hydraulic conductivity (K) tests, comparing in situ testing methods, and evaluating the results of such tests. This report may be used as a practical decision-making tool by the Uranium Mill Tailings Remedial Action (UMTRA) Project staff to determine which testing method will most efficiently achieve the field-saturated K results needed for long-term planning. A detailed section on near-surface test methods discusses each method which may be applicable to characterization of UMTRA disposal cell covers, liners and foundation materials. These potentially applicable test methods include the sealed double-ring infiltrometer (SDRI), the air-entry permeameter (AEP), the guelph permeameter, the two-stage borehole technique (TSB), the pressure infiltrometer, and the disk permeameter. Analytical solutions for these methods are provided, and limitations of these solutions are discussed, and a description of testing equipment design and installation are provided

  3. In-situ Observation of Fracture Behavior on Nano Structure in NITE SiC/SiC Composite by HVEM

    International Nuclear Information System (INIS)

    Shibayama, Tamaki; Hamada, Kouichi; Watanabe, Seiichi; Matsuo, Genichiro; Kishimoto, Hirotatsu

    2011-01-01

    We have been successfully done in situ observation on the sequence of fracture event at the interface of NITE SiC/SiC composite examined by using miniaturized double notched shear specimen for TEM prepared by Focused Ion Beam method. In this study, we used nano-mechanics TEM experimental apparatus to investigate not only microstructure evolution and but also load and displacement curve at once in High Voltage Electron Microscope. Our results summarize as follows. Cracks were initiated at the interface between carbon coating layer on the SiC fiber and SiC matrices, and propagated along the interface. Load drop in the load and displacement curve during in-situ TEM was clearly observed at the crack initiation. The shear strength by using the miniaturized specimen is about ten times higher than that obtained by the standard testing.

  4. Optical reflectance in fibrous tissues and skeletal muscles

    Science.gov (United States)

    Ranasinghesagara, Janaka C.

    We studied two biological tissues with optically anisotropic structures: high moisture soy protein extrudates and skeletal muscles. High moisture extrusion has been used to produce vegetable meat analogs that resemble real animal meat and have significant health benefits. Since visual and textural properties are key factors for consumer acceptance, assessing fiber formation in the extruded soy protein product is important for quality control purpose. A non-destructive method based on photon migration was developed to measure fiber formation in extruded soy proteins. The measured fiber formation index in intact samples showed good agreement with that obtained from image analysis on peeled samples. By implementing this new method in a fast laser scanning system, we have acquired two dimensional mappings of fiber formation and orientation in the entire sample in real time. In addition to fibrous structures, skeletal muscles have a unique periodic sarcomere structure which produces strong light diffractions. However, inconsistent experimental results have been reported in single fiber diffraction studies. By applying the three-dimensional coupled wave theory in a physical sarcomere model, we found that a variety of experimental observations can be explained if inhomogeneous muscle morphological profiles are considered. We also discovered that the sarcomere structure produced a unique optical reflectance pattern in whole muscle. None of the existing light propagation theories are able to describe this pattern. We developed a Monte Carlo model incorporating the sarcomere diffraction effect. The simulated results quantitatively resemble the unique patterns observed in experiments. We used a set of parameters to quantify the optical reflectance profiles produced by a point incident light in whole muscle. Two parameters, q and B, were obtained by numerically fitting the equi-intensity contours of the reflectance pattern. Two spatial gradients were calculated along the

  5. Non-oxidative and oxidative torrefaction characterization and SEM observations of fibrous and ligneous biomass

    International Nuclear Information System (INIS)

    Chen, Wei-Hsin; Lu, Ke-Miao; Lee, Wen-Jhy; Liu, Shih-Hsien; Lin, Ta-Chang

    2014-01-01

    Highlights: • Non-oxidative and oxidative torrefaction of biomass is studied. • Two fibrous biomasses and two ligneous biomasses are tested. • SEM observations of four biomasses are provided. • Fibrous biomass is more sensitive to O 2 concentration than ligneous biomass. • The performance of non-oxidative torrefaction is better than that of oxidative torrefaction. - Abstract: Oxidative torrefaction is a method to reduce the operating cost of upgrading biomass. To understand the potential of oxidative torrefaction and its impact on the internal structure of biomass, non-oxidative and oxidative torrefaction of two fibrous biomass materials (oil palm fiber and coconut fiber) and two ligneous ones (eucalyptus and Cryptomeria japonica) at 300 °C for 1 h are studied and compared with each other. Scanning electron microscope (SEM) observations are also performed to explore the impact of torrefaction atmosphere on the lignocellulosic structure of biomass. The results indicate that the fibrous biomass is more sensitive to O 2 concentration than the ligneous biomass. In oxidative torrefaction, an increase in O 2 concentration decreases the solid yield. The energy yield is linearly proportional to the solid yield, which is opposite to the behavior of non-oxidative torrefaction. The performance of non-oxidative torrefaction is better than that of oxidative torrefaction. As a whole, ligneous biomass can be torrefied in oxidative environments at lower O 2 concentrations, whereas fibrous biomass is more suitable for non-oxidative torrefaction

  6. An adolescent presenting with malignant fibrous histiocytoma of the testis: a case report

    Directory of Open Access Journals (Sweden)

    Wang Lian-Li

    2013-01-01

    Full Text Available Abstract Introduction Malignant fibrous histiocytoma is a very common subtype of soft-tissue sarcoma in middle and late adulthood. However, malignant fibrous histiocytoma of the testis is very rare in adolescents. Case presentation We report here the case of a 14-year-old Han Chinese boy, who presented with left scrotal mass lasting for 20 days along with distending pain for 5 days. A physical examination revealed a chicken egg-sized, firm, well-defined mass and unclear epididymis. A B-scan ultrasonography of the left scrotum displayed a 9.0×5.2×4.5cm medium- or low-echoic lobulated mass, which suggested a left testicular neoplasm. A fine needle aspiration cytology examination revealed that the cells obtained from the patient’s testicular neoplasm were composed of myxoid spindle, and ovoid cells with nuclear atypia and mitotic activity, and arranged in a whirlpool or storiform pattern. Under histological examination, the tumor cells were arranged in a storiform pattern, which displayed mucoid matrix degeneration, and grew invasively. Consequently, a histopathological diagnosis suggested myxofibrosarcoma (or myxoid malignant fibrous histiocytoma. Conclusions An ultrasonic examination combined with fine needle aspiration cytology should be helpful for the initial differential diagnosis of testicular malignant fibrous histiocytoma. However, the final confirmation relies on histopathological examination. To the best of our knowledge, this is the first reported case of malignant fibrous histiocytoma of the testis in an adolescent.

  7. On the examination of Darcy permeability of soft fibrous porous media; New correlations

    Science.gov (United States)

    Zhu, Zenghao; Wang, Qiuyun; Wu, Qianhong

    2017-11-01

    In this presentation, we report a novel experimental approach to investigate the compression-dependent Darcy permeability of soft porous media. Especially, we are proposing new correlations that describe the change of the permeability of random fibrous porous media as a function of its compression. A special device was developed that consisted of a rectangular flow channel with adjustable gap thickness ranging from 3 mm to 20 mm. Air was forced through the thin gap filled with testing fibrous materials. By measuring the flow rate and the pressure gradient, we have successfully obtained the Darcy permeability of different fibrous porous materials at different compression ratios. Theoretical or semi-empirical models have been compared with the experimental results, indicating various degrees of disagreement. The new correlations were then proposed which fit with experimental data very well. The study presented herein provides a useful approach to evaluate the change of the permeability of fibrous porous media as a function of its compression. It will be valuable for examining fluid flow in fibrous porous media where the permeability is difficult to be measured directly. This kind of porous media widely exists in biological systems. This research was supported by the National Science Foundation under Award No. 1511096.

  8. Three-dimensional reconstruction of a random fibrous medium: Geometry, transport, and sound absorbing properties.

    Science.gov (United States)

    Luu, Hoang Tuan; Perrot, Camille; Monchiet, Vincent; Panneton, Raymond

    2017-06-01

    The main purpose of this article is to present, within a unified framework, a technique based on numerical homogenization, to model the acoustical properties of real fibrous media from their geometrical characteristics and to compare numerical results with experimental data. The authors introduce a reconstruction procedure for a random fibrous medium and use it as a basis for the computation of its geometrical, transport, and sound absorbing properties. The previously ad hoc "fiber anisotropies" and "volume weighted average radii," used to describe the experimental data on microstructure, are here measured using scanning electron microscopy. The authors show that these parameters, in conjunction with the bulk porosity, contribute to a precise description of the acoustical characteristics of fibrous absorbents. They also lead to an accurate prediction of transport parameters which can be used to predict acoustical properties. The computed values of the permeability and frequency-dependent sound absorption coefficient are successfully compared with permeability and impedance-tube measurements. The authors' results indicate the important effect of fiber orientation on flow properties associated with the different physical properties of fibrous materials. A direct link is provided between three-dimensional microstructure and the sound absorbing properties of non-woven fibrous materials, without the need for any empirical formulae or fitting parameters.

  9. MR imaging of liver cirrhosis. Role of fibrous septa in visualization of regenerating nodules

    Energy Technology Data Exchange (ETDEWEB)

    Kita, K. [Dept. of Radiology, Wakayama Medical College (Japan); Kita, M. [Dept. of Radiology, Wakayama Medical College (Japan); Sato, M. [Dept. of Radiology, Wakayama Medical College (Japan); Ooshima, A. [Dept. of Pathology 1, Wakayama Medical College (Japan); Yamada, R. [Dept. of Radiology, Wakayama Medical College (Japan)

    1996-03-01

    The objective of this study was to identify the factors affecting the visualization of regenerating nodules in cirrhotic liver by MR imaging. MR images from patients with liver cirrhosis and normal subjects were studied, and signal intensity within the liver was measured and correlated with histologic findings. A reference phantom was also used as a standard. The signal intensity of the liver on T2-weighted (T2WI) spin-echo (SE) images was significantly increased in patients with liver cirrhosis. Multiple ring-like or reticular high-intensity areas (RHAs) were demonstrated on T2WI SE images in 44 of 125 cirrhotic livers. Histologic examination in 44 cases revealed various degrees of inflammatory changes in fibrous septa surrounding regenerative nodules in all specimens, vascular dilation in fibrous septa in 4 specimens, and no hemosiderin deposition in some specimens. The results of linear discriminant analysis showed that inflammatory changes in fibrous septa were significantly more pronounced in cases with RHAs on MR. RHAs seen on T2WI SE images may correspond to fibrous septa with inflammation. The signal intensity of fibrous septa surrounding regenerative nodules on T2WI SE images may be increased in liver cirrhosis due to inflammation or vascular dilation, contributing to the visualization of regenerating nodules as relatively low-intensity regions on MR. (orig.).

  10. The interface interaction behavior between E. coli and two kinds of fibrous minerals.

    Science.gov (United States)

    Dai, Qunwei; Han, Linbao; Deng, Jianjun; Zhao, Yulian; Dang, Zheng; Tan, Daoyong; Dong, Faqin

    2017-11-09

    In the present, studies of interaction between human normal flora and fibrous mineral are still lacking. Batch experiments were performed to deal with the interaction of Escherichia coli and two fibrous minerals (brucite and palygorskite), and the interface and liquid phase characteristics in the short-term interaction processes were discussed. The bacterial concentrations, the remnant glucose (GLU), pyruvic acid, and the activity of β-galactosidase and six elements were measured, and the results show that the promoting effect of brucite on the growth of E. coli was more significant than that of palygorskite. FTIR and XRD analysis results also confirmed E. coli has obviously dissolved on brucite and damage effect on palygorskite silicon structure. SEM results show that the interfacial contact degree between E. coli cells and brucite fibers was higher than that of palygorskite. These may be due to the zeta potential difference between E. coli and palygorskite was 14.57-22.37 mV, while it of brucite was 44.04-64.24 mV. The elements dissolving of two fibrous minerals not only increased regularly to liquid EC but also had a good buffer effect to the decrease of liquid pH. Studies of short-term interaction between E. coli and brucite and palygorskite can help to understand the effect of fibrous minerals on microeubiosis of human normal flora and the contribution of microbial behaviors on the fibrous minerals weathering in the natural environment.

  11. In situ Raman spectroelectrochemical study of 13C-labeled fullerene peapods and carbon nanotubes.

    Science.gov (United States)

    Kalbác, Martin; Kavan, Ladislav; Zukalová, Markéta; Dunsch, Lothar

    2007-10-01

    C60 fullerene peapods and double-walled carbon nanotubes (DWCNTs) containing highly 13C enriched C60 and inner tubes, respectively, are studied using Raman spectroscopy and in situ Raman spectroelectrochemistry in order to follow the influence of 13C enrichment on the vibrational pattern of these carbon nanostructures. The Raman response of 13C60 after encapsulation in fullerene peapods differs from that of isotope-natural species, (Nat)C60. The Raman A(g)(2) mode of encapsulated 13C60 is upshifted in frequency compared to that of the (Nat)C60 peapods with the same filling factor. The chemical doping of 13C60 peapods (peapod = C(60)@SWCNT) with K-vapor leads to the downshift of the A(g)(2) mode, similar to the case of (Nat)C60 peapods. The 13C60 peapods were successfully transformed into DWCNTs, which confirms high filling of single-walled (SW) CNTs with 13C60. The DWCNTs exhibited distinctly downshifted G and D Raman modes for inner tubes, which proves that only inner tubes were enriched by 13C. The in situ Raman spectroelectrochemistry of (Nat)C60 exhibits strong anodic enhancement, while for 13C60 peapods the enhancement is only weak. On the other hand, the electrochemical charging of the inner-tube-labeled DWCNTs (13C(i)-DWCNTs) followed the behavior of ordinary (Nat)C(i)-DWCNTs as indicated by in situ Raman spectroelectrochemistry. In addition, the spectroelectrochemical behavior of the G mode of inner tubes in 13C(i)-DWCNTs is followed from the start of the electrochemical doping, which was not feasible for (Nat)C(i)-DWCNTs.

  12. An integrated on-line irradiation and in situ live cell imaging system

    Science.gov (United States)

    Liang, Ying; Fu, Qibin; Wang, Weikang; Liu, Yu; Liu, Feng; Yang, Gen; Wang, Yugang

    2015-09-01

    Ionizing radiation poses a threat to genome integrity by introducing DNA damages, particularly DNA double-strand breaks (DSB) in cells. Understanding how cells react to DSB and maintain genome integrity is of major importance, since increasing evidences indicate the links of DSB with genome instability and cancer predispositions. However, tracking the dynamics of DNA damages and repair response to ionizing radiation in individual cell is difficult. Here we describe the development of an on-line irradiation and in situ live cell imaging system based on isotopic sources at Institute of Heavy Ion Physics, Peking University. The system was designed to irradiate cells and in situ observe the cellular responses to ionizing radiation in real time. On-line irradiation was achieved by mounting a metal framework that hold an isotopic γ source above the cell culture dish for γ irradiation; or by integrating an isotopic α source to an objective lens under the specialized cell culture dish for α irradiation. Live cell imaging was performed on a confocal microscope with an environmental chamber installed on the microscope stage. Culture conditions in the environment chamber such as CO2, O2 concentration as well as temperature are adjustable, which further extends the capacity of the system and allows more flexible experimental design. We demonstrate the use of this system by tracking the DSB foci formation and disappearance in individual cells after exposure to irradiation. On-line irradiation together with in situ live cell imaging in adjustable culture conditions, the system overall provides a powerful tool for investigation of cellular and subcellular response to ionizing radiation under different physiological conditions such as hyperthermia or hypoxia.

  13. An integrated on-line irradiation and in situ live cell imaging system

    International Nuclear Information System (INIS)

    Liang, Ying; Fu, Qibin; Wang, Weikang; Liu, Yu; Liu, Feng; Yang, Gen; Wang, Yugang

    2015-01-01

    Ionizing radiation poses a threat to genome integrity by introducing DNA damages, particularly DNA double-strand breaks (DSB) in cells. Understanding how cells react to DSB and maintain genome integrity is of major importance, since increasing evidences indicate the links of DSB with genome instability and cancer predispositions. However, tracking the dynamics of DNA damages and repair response to ionizing radiation in individual cell is difficult. Here we describe the development of an on-line irradiation and in situ live cell imaging system based on isotopic sources at Institute of Heavy Ion Physics, Peking University. The system was designed to irradiate cells and in situ observe the cellular responses to ionizing radiation in real time. On-line irradiation was achieved by mounting a metal framework that hold an isotopic γ source above the cell culture dish for γ irradiation; or by integrating an isotopic α source to an objective lens under the specialized cell culture dish for α irradiation. Live cell imaging was performed on a confocal microscope with an environmental chamber installed on the microscope stage. Culture conditions in the environment chamber such as CO 2 , O 2 concentration as well as temperature are adjustable, which further extends the capacity of the system and allows more flexible experimental design. We demonstrate the use of this system by tracking the DSB foci formation and disappearance in individual cells after exposure to irradiation. On-line irradiation together with in situ live cell imaging in adjustable culture conditions, the system overall provides a powerful tool for investigation of cellular and subcellular response to ionizing radiation under different physiological conditions such as hyperthermia or hypoxia

  14. An integrated on-line irradiation and in situ live cell imaging system

    Energy Technology Data Exchange (ETDEWEB)

    Liang, Ying; Fu, Qibin; Wang, Weikang; Liu, Yu; Liu, Feng; Yang, Gen, E-mail: gen.yang@pku.edu.cn; Wang, Yugang

    2015-09-01

    Ionizing radiation poses a threat to genome integrity by introducing DNA damages, particularly DNA double-strand breaks (DSB) in cells. Understanding how cells react to DSB and maintain genome integrity is of major importance, since increasing evidences indicate the links of DSB with genome instability and cancer predispositions. However, tracking the dynamics of DNA damages and repair response to ionizing radiation in individual cell is difficult. Here we describe the development of an on-line irradiation and in situ live cell imaging system based on isotopic sources at Institute of Heavy Ion Physics, Peking University. The system was designed to irradiate cells and in situ observe the cellular responses to ionizing radiation in real time. On-line irradiation was achieved by mounting a metal framework that hold an isotopic γ source above the cell culture dish for γ irradiation; or by integrating an isotopic α source to an objective lens under the specialized cell culture dish for α irradiation. Live cell imaging was performed on a confocal microscope with an environmental chamber installed on the microscope stage. Culture conditions in the environment chamber such as CO{sub 2}, O{sub 2} concentration as well as temperature are adjustable, which further extends the capacity of the system and allows more flexible experimental design. We demonstrate the use of this system by tracking the DSB foci formation and disappearance in individual cells after exposure to irradiation. On-line irradiation together with in situ live cell imaging in adjustable culture conditions, the system overall provides a powerful tool for investigation of cellular and subcellular response to ionizing radiation under different physiological conditions such as hyperthermia or hypoxia.

  15. Innovative instrumentation for in-situ soil NO3- measurements

    Science.gov (United States)

    Tuli, A.; Hopmans, J. W.; Shaw, B. D.; Wei, J.

    2006-12-01

    Among the soil nutrients for plant growth, nitrogen (N) is one of the essential macronutrients for crop production, mostly taken up by plants in the form of nitrate (NO3-). The absence of in-situ instrumentation limits the ability to monitor concentration levels of soil solution nitrate and the evaluation of plant nutrient uptake mechanism for specific environmental and agricultural management practices. Two new in situ measurement techniques are presented that can potentially be applied in the field, with measurements recorded electronically in real time as opposed to extracting soil solutions for laboratory measurements. Both use a stainless steel solution sampler design. The first technique uses the adoption of a NO3- ion selective electrode (ISE) to determine in-situ NO3- concentrations in soil solution. Current laboratory tests confirmed that using a one-point calibration procedure, the NO3- ion selective electrode can measure in situ NO3- concentrations in soil solution. The second technique measures NO3- concentration using ultraviolet absorption spectroscopy. This sampler has internal optics that enable a beam of light to be directed through the solution in the sampler. The internal optics are coupled to optical fibers that allow light to be transmitted into and out of the system, enabling analysis with a portable fiber optic spectrometer. This paper describes the evaluation of both innovative measurement approaches for their potential use with in-situ measurements.

  16. In situ Measurements of Phytoplankton Fluorescence Using Low Cost Electronics

    Directory of Open Access Journals (Sweden)

    Dana L. Wright

    2013-06-01

    Full Text Available Chlorophyll a fluorometry has long been used as a method to study phytoplankton in the ocean. In situ fluorometry is used frequently in oceanography to provide depth-resolved estimates of phytoplankton biomass. However, the high price of commercially manufactured in situ fluorometers has made them unavailable to some individuals and institutions. Presented here is an investigation into building an in situ fluorometer using low cost electronics. The goal was to construct an easily reproducible in situ fluorometer from simple and widely available electronic components. The simplicity and modest cost of the sensor makes it valuable to students and professionals alike. Open source sharing of architecture and software will allow students to reconstruct and customize the sensor on a small budget. Research applications that require numerous in situ fluorometers or expendable fluorometers can also benefit from this study. The sensor costs US$150.00 and can be constructed with little to no previous experience. The sensor uses a blue LED to excite chlorophyll a and measures fluorescence using a silicon photodiode. The sensor is controlled by an Arduino microcontroller that also serves as a data logger.

  17. Advanced physical models and monitoring methods for in situ bioremediation

    Energy Technology Data Exchange (ETDEWEB)

    Simon, K.; Chalmer, P.

    1996-05-30

    Numerous reports have indicated that contamination at DOE facilities is widespread and pervasive. Existing technology is often too costly or ineffective in remediating these contamination problems. An effective method to address one class of contamination, petroleum hydrocarbons, is in situ bioremediation. This project was designed to provide tools and approaches for increasing the reliability of in situ bioremediation. An example of the recognition within DOE for developing these tools is in the FY-1995 Technology Development Needs Summary of the Office of Technology Development of the US DOE. This document identifies specific needs addressed by this research. For example, Section 3.3 Need Statement IS-3 identifies the need for a {open_quotes}Rapid method to detect in situ biodegradation products.{close_quotes} Also, BW-I identifies the need to recognize boundaries between clean and contaminated materials and soils. Metabolic activity could identify these boundaries. Measuring rates of in situ microbial activity is critical to the fundamental understanding of subsurface microbiology and in selecting natural attenuation as a remediation option. Given the complexity and heterogeneity of subsurface environments, a significant cost incurred during bioremediation is the characterization of microbial activity, in part because so many intermediate end points (biomass, gene frequency, laboratory measurements of activity, etc.) must be used to infer in situ activity. A fast, accurate, real-time, and cost-effective method is needed to determine success of bioremediation at DOE sites.

  18. Feasibility of in situ beta ray measurements in underwater environment.

    Science.gov (United States)

    Park, Hye Min; Park, Ki Hyun; Kang, Sung Won; Joo, Koan Sik

    2017-09-01

    We describe an attempt at the development of an in situ detector for beta ray measurements in underwater environment. The prototype of the in situ detector is based on a CaF2: Eu scintillator using crystal light guide and Si photomultiplier. Tests were conducted using various reference sources for evaluating the linearity and stability of the detector in underwater environment. The system is simple and stable for long-term monitoring, and consumes low power. We show here an effective detection distance of 7 mm and a 2.273 MeV end-point energy spectrum of 90 Sr/ 90 Y when using the system underwater. The results demonstrate the feasibility of in situ beta ray measurements in underwater environment and can be applied for designing an in situ detector for radioactivity measurement in underwater environment. The in situ detector can also have other applications such as installation on the marine monitoring platform and quantitative analysis of radionuclides. Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. Nanoparticles laden in situ gel for sustained ocular drug delivery

    Directory of Open Access Journals (Sweden)

    Himanshu Gupta

    2013-01-01

    Full Text Available Proper availability of drug on to corneal surface is a challenging task. However, due to ocular physiological barriers, conventional eye drops display poor ocular bioavailability of drugs (< 1%. To improve precorneal residence time and ocular penetration, earlier our group developed and evaluated in situ gel and nanoparticles for ocular delivery. In interest to evaluate the combined effect of in situ gel and nanoparticles on ocular retention, we combined them. We are the first to term this combination as "nanoparticle laden in situ gel", that is, poly lactic co glycolic acid nanoparticle incorporated in chitosan in situ gel for sparfloxacin ophthalmic delivery. The formulation was tested for various physicochemical properties. It showed gelation pH near pH 7.2. The observation of acquired gamma camera images showed good retention over the entire precorneal area for sparfloxacin nanoparticle laden in situ gel (SNG as compared to marketed formulation. SNG formulation cleared at a very slow rate and remained at corneal surface for longer duration as no radioactivity was observed in systemic circulation. The developed formulation was found to be better in combination and can go up to the clinical evaluation and application.

  20. In-situ pyrogenic production of biodiesel from swine fat.

    Science.gov (United States)

    Lee, Jechan; Tsang, Yiu Fai; Jung, Jong-Min; Oh, Jeong-Ik; Kim, Hyung-Wook; Kwon, Eilhann E

    2016-11-01

    In-situ production of fatty acid methyl esters from swine fat via thermally induced pseudo-catalytic transesterification on silica was investigated in this study. Instead of methanol, dimethyl carbonate (DMC) was used as acyl acceptor to achieve environmental benefits and economic viability. Thermo-gravimetric analysis of swine fat reveals that swine fat contains 19.57wt.% of water and impurities. Moreover, the fatty acid profiles obtained under various conditions (extracted swine oil+methanol+NaOH, extracted swine oil+DMC+pseudo-catalytic, and swine fat+DMC+pseudo-catalytic) were compared. These profiles were identical, showing that the introduced in-situ transesterification is technically feasible. This also suggests that in-situ pseudo-catalytic transesterification has a high tolerance against impurities. This study also shows that FAME yield via in-situ pseudo-catalytic transesterification of swine fat reached up to 97.2% at 380°C. Therefore, in-situ pseudo-catalytic transesterification can be applicable to biodiesel production of other oil-bearing biomass feedstocks. Copyright © 2016 Elsevier Ltd. All rights reserved.