WorldWideScience

Sample records for designer monotransregulators provide

  1. Design of the ITER magnets to provide plasma operational flexibility

    International Nuclear Information System (INIS)

    Mitchell, N.; Bessette, D.; Ferrari, M.; Huguet, M.; Jong, C.; Takahashi, Y.; Yoshida, K.; Maix, R.; Krivchenkov, Y.; Zapretilina, E.

    2005-01-01

    The ITER magnets have been optimised and refined since the ITER Final Design Report (FDR) in 2001. Multiple design options have been eliminated and there is improved ability to drive a wide range of plasma configurations. Design iterations on the TF out of plane supports have eliminated stress concentrations in the inner keyways and have led to the choice of a so called friction-joint on the outside. The closure procedure for the TF case has been changed, with a new case segmentation, less risk of winding pack damage from shrinkage and better filling of the case-winding gaps. Selection of compact joints for the CS has enabled the peak field and cyclic stress levels in the conductor to be reduced while maintaining the flux capability. The uncertainty in the nuclear heat levels in the inner legs of the TF coils, and the need to operate with plasma nuclear powers from 360 to 700MW, lead to a thermal screen on the inside of the case with variable cooling capability. The electrical insulation specification has been refined after irradiation test results to give a better margin on the onset of degradation after operation to 3MWa/m 2 . The RWM stabilisation provided by the side CC has been extended by accepting higher voltages and heating from AC losses. R and D results from the model coil tests have shown lower than expected design margins for the Nb3Sn conductors. This has been offset by adopting the latest advances in strand performance, and the margins of the new conductor will be confirmed by testing in 2005. Preparation for procurement is underway with considerations on technically acceptable ways of splitting the magnet supply. (author)

  2. How the Ethnography of Communication Provides Resources for Design

    Science.gov (United States)

    Leighter, James L.; Rudnick, Lisa; Edmonds, Theresa J.

    2013-01-01

    Designing solutions to social problems requires some degree of interpretive accountability to the sociocultural systems in which design solutions must live. Our case studies show how ethnography of communication research generates distinctive resources for design. (Contains 5 notes.)

  3. The design briefing process matters: a case study on telehealthcare device providers in the UK.

    Science.gov (United States)

    Yang, Fan; Renda, Gianni

    2018-01-23

    The telehealthcare sector has been expanding steadily in the UK. However, confusing, complex and unwieldy designs of telehealthcare devices are at best, less effective than they could be, at worst, they are potentially dangerous to the users. This study investigated the factors within the new product development process that hindered satisfactory product design outcomes, through working collaboratively with a leading provider based in the UK. This study identified that there are too many costly late-stage design changes; a critical and persistent problem area ripe for improvement. The findings from analyzing 30 recent devices, interviewing key stakeholders and observing on-going projects further revealed that one major cause of the issue was poor practice in defining and communicating the product design criteria and requirements. Addressing the characteristics of the telehealthcare industry, such as multiple design commissioners and frequent deployment of design subcontracts, this paper argues that undertaking a robust process of creating the product design brief is the key to improving the outcomes of telehealthcare device design, particularly for the small and medium-sized enterprises dominating the sector. Implications for rehabilitation Product design criteria and requirements are frequently ill-defined and ineffectively communicated to the designers within the processes of developing new telehealthcare devices. The absence of a (robust) process of creating the design brief is the root cause of the identified issues in defining and communicating the design task. Deploying a formal process of creating the product design brief is particularly important for the telehealthcare sector.

  4. Auroral Electrojet Index Designed to Provide a Global Measure, Hourly Intervals, of Auroral Zone Magnetic Activity

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Auroral Electrojet (AE) index is designed to provide a global quantitative measure of auroral zone magnetic activity produced by enhanced ionospheric currents...

  5. A Process Framework for Designing Software Reference Architectures for Providing Tools as a Service

    DEFF Research Database (Denmark)

    Chauhan, Muhammad Aufeef; Babar, Muhammad Ali; Probst, Christian W.

    2016-01-01

    of software systems need customized and systematic SRA design and evaluation methods. In this paper, we present a software Reference Architecture Design process Framework (RADeF) that can be used for analysis, design and evaluation of the SRA for provisioning of Tools as a Service as part of a cloud......Software Reference Architecture (SRA), which is a generic architecture solution for a specific type of software systems, provides foundation for the design of concrete architectures in terms of architecture design guidelines and architecture elements. The complexity and size of certain types......-enabled workSPACE (TSPACE). The framework is based on the state of the art results from literature and our experiences with designing software architectures for cloud-based systems. We have applied RADeF SRA design two types of TSPACE: software architecting TSPACE and software implementation TSPACE...

  6. The provider perception inventory: psychometrics of a scale designed to measure provider stigma about HIV, substance abuse, and MSM behavior.

    Science.gov (United States)

    Windsor, Liliane C; Benoit, Ellen; Ream, Geoffrey L; Forenza, Brad

    2013-01-01

    Nongay identified men who have sex with men and women (NGI MSMW) and who use alcohol and other drugs are a vulnerable, understudied, and undertreated population. Little is known about the stigma faced by this population or about the way that health service providers view and serve these stigmatized clients. The provider perception inventory (PPI) is a 39-item scale that measures health services providers' stigma about HIV/AIDS, substance use, and MSM behavior. The PPI is unique in that it was developed to include service provider stigma targeted at NGI MSMW individuals. PPI was developed through a mixed methods approach. Items were developed based on existing measures and findings from focus groups with 18 HIV and substance abuse treatment providers. Exploratory factor analysis using data from 212 health service providers yielded a two dimensional scale: (1) individual attitudes (19 items) and (2) agency environment (11 items). Structural equation modeling analysis supported the scale's predictive validity (N=190 sufficiently complete cases). Overall findings indicate initial support for the psychometrics of the PPI as a measure of service provider stigma pertaining to the intersection of HIV/AIDS, substance use, and MSM behavior. Limitations and implications to future research are discussed.

  7. The Synthetic Biology Open Language (SBOL) provides a community standard for communicating designs in synthetic biology.

    Science.gov (United States)

    Galdzicki, Michal; Clancy, Kevin P; Oberortner, Ernst; Pocock, Matthew; Quinn, Jacqueline Y; Rodriguez, Cesar A; Roehner, Nicholas; Wilson, Mandy L; Adam, Laura; Anderson, J Christopher; Bartley, Bryan A; Beal, Jacob; Chandran, Deepak; Chen, Joanna; Densmore, Douglas; Endy, Drew; Grünberg, Raik; Hallinan, Jennifer; Hillson, Nathan J; Johnson, Jeffrey D; Kuchinsky, Allan; Lux, Matthew; Misirli, Goksel; Peccoud, Jean; Plahar, Hector A; Sirin, Evren; Stan, Guy-Bart; Villalobos, Alan; Wipat, Anil; Gennari, John H; Myers, Chris J; Sauro, Herbert M

    2014-06-01

    The re-use of previously validated designs is critical to the evolution of synthetic biology from a research discipline to an engineering practice. Here we describe the Synthetic Biology Open Language (SBOL), a proposed data standard for exchanging designs within the synthetic biology community. SBOL represents synthetic biology designs in a community-driven, formalized format for exchange between software tools, research groups and commercial service providers. The SBOL Developers Group has implemented SBOL as an XML/RDF serialization and provides software libraries and specification documentation to help developers implement SBOL in their own software. We describe early successes, including a demonstration of the utility of SBOL for information exchange between several different software tools and repositories from both academic and industrial partners. As a community-driven standard, SBOL will be updated as synthetic biology evolves to provide specific capabilities for different aspects of the synthetic biology workflow.

  8. 13 CFR 127.502 - How will SBA identify and provide notice of the designated industries?

    Science.gov (United States)

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false How will SBA identify and provide notice of the designated industries? 127.502 Section 127.502 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION WOMEN-OWNED SMALL BUSINESS FEDERAL CONTRACT ASSISTANCE PROCEDURES Federal Contract...

  9. Design study of primary ion provider for relativistic heavy ion collider electron beam ion source.

    Science.gov (United States)

    Kondo, K; Kanesue, T; Tamura, J; Okamura, M

    2010-02-01

    Brookhaven National Laboratory has developed the new preinjector system, electron beam ion source (EBIS) for relativistic heavy ion collider (RHIC) and National Aeronautics and Space Administration Space Radiation Laboratory. Design of primary ion provider is an essential problem since it is required to supply beams with different ion species to multiple users simultaneously. The laser ion source with a defocused laser can provide a low charge state and low emittance ion beam, and is a candidate for the primary ion source for RHIC-EBIS. We show a suitable design with appropriate drift length and solenoid, which helps to keep sufficient total charge number with longer pulse length. The whole design of primary ion source, as well as optics arrangement, solid targets configuration and heating about target, is presented.

  10. The German electricity market. Does the present market design provide security of supply?

    International Nuclear Information System (INIS)

    Janssen, Matthias; Peichert, Patrick; Perner, Jens; Riechmann, Christoph; Niedrig, Thomas

    2014-01-01

    A heated discussion is being waged in Germany and large parts of Europe over the introduction of what are referred to as capacity mechanisms, whose purpose is to provide security of supply in the electricity sector. In this context two consulting firms have undertaken a both qualitative and quantitative study of the fitness of the present market design, which is based on the ''Energy-Only Market'' (EOM), to provide security of supply in the German electricity market. The authors come to the conclusion that, if suitably framed, the EOM can continue to provide a secure electricity supply in accordance with consumer preferences and at the lowest possible cost.

  11. On designing of a low leakage patient-centric provider network.

    Science.gov (United States)

    Zheng, Yuchen; Lin, Kun; White, Thomas; Pickreign, Jeremy; Yuen-Reed, Gigi

    2018-03-27

    When a patient in a provider network seeks services outside of their community, the community experiences a leakage. Leakage is undesirable as it typically leads to higher out-of-network cost for patient and increases barrier for care coordination, which is particularly problematic for Accountable Care Organization (ACO) as the in-network providers are financially responsible for quality of care and outcome. We aim to design a data-driven method to identify naturally occurring provider networks driven by diabetic patient choices, and understand the relationship among provider composition, patient composition, and service leakage pattern. By doing so, we learn the features of low service leakage provider networks that can be generalized to different patient population. Data used for this study include de-identified healthcare insurance administrative data acquired from Capital District Physicians' Health Plan (CDPHP) for diabetic patients who resided in four New York state counties (Albany, Rensselaer, Saratoga, and Schenectady) in 2014. We construct a healthcare provider network based on patients' historical medical insurance claims. A community detection algorithm is used to identify naturally occurring communities of collaborating providers. For each detected community, a profile is built using several new key measures to elucidate stakeholders of our findings. Finally, import-export analysis is conducted to benchmark their leakage pattern and identify further leakage reduction opportunity. The design yields six major provider communities with diverse profiles. Some communities are geographically concentrated, while others tend to draw patients with certain diabetic co-morbidities. Providers from the same healthcare institution are likely to be assigned to the same community. While most communities have high within-community utilization and spending, at 85% and 86% respectively, leakage still persists. Hence, we utilize a metric from import-export analysis to

  12. Structure-function relationship of skeletal muscle provides inspiration for design of new artificial muscle

    Science.gov (United States)

    Gao, Yingxin; Zhang, Chi

    2015-03-01

    A variety of actuator technologies have been developed to mimic biological skeletal muscle that generates force in a controlled manner. Force generation process of skeletal muscle involves complicated biophysical and biochemical mechanisms; therefore, it is impossible to replace biological muscle. In biological skeletal muscle tissue, the force generation of a muscle depends not only on the force generation capacity of the muscle fiber, but also on many other important factors, including muscle fiber type, motor unit recruitment, architecture, structure and morphology of skeletal muscle, all of which have significant impact on the force generation of the whole muscle or force transmission from muscle fibers to the tendon. Such factors have often been overlooked, but can be incorporated in artificial muscle design, especially with the discovery of new smart materials and the development of innovative fabrication and manufacturing technologies. A better understanding of the physiology and structure-function relationship of skeletal muscle will therefore benefit the artificial muscle design. In this paper, factors that affect muscle force generation are reviewed. Mathematical models used to model the structure-function relationship of skeletal muscle are reviewed and discussed. We hope the review will provide inspiration for the design of a new generation of artificial muscle by incorporating the structure-function relationship of skeletal muscle into the design of artificial muscle.

  13. Structure–function relationship of skeletal muscle provides inspiration for design of new artificial muscle

    International Nuclear Information System (INIS)

    Gao, Yingxin; Zhang, Chi

    2015-01-01

    A variety of actuator technologies have been developed to mimic biological skeletal muscle that generates force in a controlled manner. Force generation process of skeletal muscle involves complicated biophysical and biochemical mechanisms; therefore, it is impossible to replace biological muscle. In biological skeletal muscle tissue, the force generation of a muscle depends not only on the force generation capacity of the muscle fiber, but also on many other important factors, including muscle fiber type, motor unit recruitment, architecture, structure and morphology of skeletal muscle, all of which have significant impact on the force generation of the whole muscle or force transmission from muscle fibers to the tendon. Such factors have often been overlooked, but can be incorporated in artificial muscle design, especially with the discovery of new smart materials and the development of innovative fabrication and manufacturing technologies. A better understanding of the physiology and structure–function relationship of skeletal muscle will therefore benefit the artificial muscle design. In this paper, factors that affect muscle force generation are reviewed. Mathematical models used to model the structure–function relationship of skeletal muscle are reviewed and discussed. We hope the review will provide inspiration for the design of a new generation of artificial muscle by incorporating the structure–function relationship of skeletal muscle into the design of artificial muscle. (topical review)

  14. Manchester Coding Option for SpaceWire: Providing Choices for System Level Design

    Science.gov (United States)

    Rakow, Glenn; Kisin, Alex

    2014-01-01

    This paper proposes an optional coding scheme for SpaceWire in lieu of the current Data Strobe scheme for three reasons. First reason is to provide a straightforward method for electrical isolation of the interface; secondly to provide ability to reduce the mass and bend radius of the SpaceWire cable; and thirdly to provide a means for a common physical layer over which multiple spacecraft onboard data link protocols could operate for a wide range of data rates. The intent is to accomplish these goals without significant change to existing SpaceWire design investments. The ability to optionally use Manchester coding in place of the current Data Strobe coding provides the ability to DC balanced the signal transitions unlike the SpaceWire Data Strobe coding; and therefore the ability to isolate the electrical interface without concern. Additionally, because the Manchester code has the clock and data encoded on the same signal, the number of wires of the existing SpaceWire cable could be optionally reduced by 50. This reduction could be an important consideration for many users of SpaceWire as indicated by the already existing effort underway by the SpaceWire working group to reduce the cable mass and bend radius by elimination of shields. However, reducing the signal count by half would provide even greater gains. It is proposed to restrict the data rate for the optional Manchester coding to a fixed data rate of 10 Megabits per second (Mbps) in order to make the necessary changes simple and still able to run in current radiation tolerant Field Programmable Gate Arrays (FPGAs). Even with this constraint, 10 Mbps will meet many applications where SpaceWire is used. These include command and control applications and many instruments applications with have moderate data rate. For most NASA flight implementations, SpaceWire designs are in rad-tolerant FPGAs, and the desire to preserve the heritage design investment is important for cost and risk considerations. The

  15. Technical Reference Suite Addressing Challenges of Providing Assurance for Fault Management Architectural Design

    Science.gov (United States)

    Fitz, Rhonda; Whitman, Gerek

    2016-01-01

    Research into complexities of software systems Fault Management (FM) and how architectural design decisions affect safety, preservation of assets, and maintenance of desired system functionality has coalesced into a technical reference (TR) suite that advances the provision of safety and mission assurance. The NASA Independent Verification and Validation (IV&V) Program, with Software Assurance Research Program support, extracted FM architectures across the IV&V portfolio to evaluate robustness, assess visibility for validation and test, and define software assurance methods applied to the architectures and designs. This investigation spanned IV&V projects with seven different primary developers, a wide range of sizes and complexities, and encompassed Deep Space Robotic, Human Spaceflight, and Earth Orbiter mission FM architectures. The initiative continues with an expansion of the TR suite to include Launch Vehicles, adding the benefit of investigating differences intrinsic to model-based FM architectures and insight into complexities of FM within an Agile software development environment, in order to improve awareness of how nontraditional processes affect FM architectural design and system health management. The identification of particular FM architectures, visibility, and associated IV&V techniques provides a TR suite that enables greater assurance that critical software systems will adequately protect against faults and respond to adverse conditions. Additionally, the role FM has with regard to strengthened security requirements, with potential to advance overall asset protection of flight software systems, is being addressed with the development of an adverse conditions database encompassing flight software vulnerabilities. Capitalizing on the established framework, this TR suite provides assurance capability for a variety of FM architectures and varied development approaches. Research results are being disseminated across NASA, other agencies, and the

  16. 41 CFR 102-76.25 - What standards must Federal agencies meet in providing architectural and interior design services?

    Science.gov (United States)

    2010-07-01

    ... Federal agencies meet in providing architectural and interior design services? 102-76.25 Section 102-76.25...) FEDERAL MANAGEMENT REGULATION REAL PROPERTY 76-DESIGN AND CONSTRUCTION Design and Construction § 102-76.25 What standards must Federal agencies meet in providing architectural and interior design services...

  17. 41 CFR 102-76.20 - What issues must Federal agencies consider in providing site planning and landscape design services?

    Science.gov (United States)

    2010-07-01

    ... agencies consider in providing site planning and landscape design services? 102-76.20 Section 102-76.20... What issues must Federal agencies consider in providing site planning and landscape design services? In providing site planning and design services, Federal agencies must— (a) Make the site planning and landscape...

  18. Collaborative service innovation : A study on the collaboration between designers and service providers in dervice disigne projects

    NARCIS (Netherlands)

    Berit Kari Godfroij

    2011-01-01

    Designers move more and more in the direction of Service Design, in which frequently a participatory or co-design approach is used to involve service providers in the design process. The designerprovider relationship in such Service Design processes differs in four aspects from

  19. UniPrime2: a web service providing easier Universal Primer design.

    Science.gov (United States)

    Boutros, Robin; Stokes, Nicola; Bekaert, Michaël; Teeling, Emma C

    2009-07-01

    The UniPrime2 web server is a publicly available online resource which automatically designs large sets of universal primers when given a gene reference ID or Fasta sequence input by a user. UniPrime2 works by automatically retrieving and aligning homologous sequences from GenBank, identifying regions of conservation within the alignment, and generating suitable primers that can be used to amplify variable genomic regions. In essence, UniPrime2 is a suite of publicly available software packages (Blastn, T-Coffee, GramAlign, Primer3), which reduces the laborious process of primer design, by integrating these programs into a single software pipeline. Hence, UniPrime2 differs from previous primer design web services in that all steps are automated, linked, saved and phylogenetically delimited, only requiring a single user-defined gene reference ID or input sequence. We provide an overview of the web service and wet-laboratory validation of the primers generated. The system is freely accessible at: http://uniprime.batlab.eu. UniPrime2 is licenced under a Creative Commons Attribution Noncommercial-Share Alike 3.0 Licence.

  20. RESEARCH OF PROBLEMS OF DESIGN OF COMPLEX TECHNICAL PROVIDING AND THE GENERALIZED MODEL OF THEIR DECISION

    Directory of Open Access Journals (Sweden)

    A. V. Skrypnikov

    2015-01-01

    Full Text Available Summary. In this work the general ideas of a method of V. I. Skurikhin taking into account the specified features develop and questions of the analysis and synthesis of a complex of technical means, with finishing them to the level suitable for use in engineering practice of design of information management systems are in more detail considered. In work the general system approach to the solution of questions of a choice of technical means of the information management system is created, the general technique of the sys tem analysis and synthesis of a complex of the technical means and its subsystems providing achievement of extreme value of criterion of efficiency of functioning of a technical complex of the information management system is developed. The main attention is paid to the applied party of system researches of complex technical providing, in particular, to definition of criteria of quality of functioning of a technical complex, development of methods of the analysis of information base of the information management system and definition of requirements to technical means, and also methods of structural synthesis of the main subsystems of complex technical providing. Thus, the purpose is research on the basis of system approach of complex technical providing the information management system and development of a number of methods of the analysis and the synthesis of complex technical providing suitable for use in engineering practice of design of systems. The well-known paradox of development of management information consists of that parameters of the system, and consequently, and requirements to the complex hardware, can not be strictly reasonable to development of algorithms and programs, and vice versa. The possible method of overcoming of these difficulties is prognostication of structure and parameters of complex hardware for certain management informations on the early stages of development, with subsequent clarification and

  1. Providing Data Management Support to NASA Airborne Field Studies through Streamlined Usability Design

    Science.gov (United States)

    Beach, A. L., III; Northup, E. A.; Early, A. B.; Chen, G.

    2016-12-01

    Airborne field studies are an effective way to gain a detailed understanding of atmospheric processes for scientific research on climate change and air quality relevant issues. One major function of airborne project data management is to maintain seamless data access within the science team. This allows individual instrument principal investigators (PIs) to process and validate their own data, which requires analysis of data sets from other PIs (or instruments). The project's web platform streamlines data ingest, distribution processes, and data format validation. In May 2016, the NASA Langley Research Center (LaRC) Atmospheric Science Data Center (ASDC) developed a new data management capability to help support the Korea U.S.-Air Quality (KORUS-AQ) science team. This effort is aimed at providing direct NASA Distributed Active Archive Center (DAAC) support to an airborne field study. Working closely with the science team, the ASDC developed a scalable architecture that allows investigators to easily upload and distribute their data and documentation within a secure collaborative environment. The user interface leverages modern design elements to intuitively guide the PI through each step of the data management process. In addition, the new framework creates an abstraction layer between how the data files are stored and how the data itself is organized(i.e. grouping files by PI). This approach makes it easy for PIs to simply transfer their data to one directory, while the system itself can automatically group/sort data as needed. Moreover, the platform is "server agnostic" to a certain degree, making deployment and customization more straightforward as hardware needs change. This flexible design will improve development efficiency and can be leveraged for future field campaigns. This presentation will examine the KORUS-AQ data portal as a scalable solution that applies consistent and intuitive usability design practices to support ingest and management of airborne

  2. Consideration of hot channel factors in design for providing operating margins on coolant channel outlet temperature

    International Nuclear Information System (INIS)

    Sharma, V.K.; Surendar, C.; Bapat, C.N.

    1994-01-01

    The Indian Pressurized Heavy Water Reactors (IPHWR) are horizontal pressure tube reactors using natural uranium oxide fuel in the form of short (495 mm) clusters. The fuel clusters in the Zr-Nb pressure tubes are cooled by high pressure, high temperature and subcooled circulating heavy water. Coolant flow distribution to individual channels is designed to match the power distribution so as to obtain uniform coolant outlet temperature. However, during operation, the coolant outlet temperature in individual channels deviate from their nominal value due to: tolerances in process design; effects of grid frequency on the pump speed; deviation in channel powers from the nominal values due to on-power fuelling and movement of reactivity devices, and so on. Thus an operating margin, between the highest permissible and nominal coolant outlet temperatures, is required taking into account various hot channel factors that contribute to higher coolant outlet temperatures. The paper discusses the methodology adopted to assess various hot channel factors which would provide optimum operating margins while ensuring sub-cooling. (author)

  3. Recommendations for the ethical use and design of artificial intelligent care providers.

    Science.gov (United States)

    Luxton, David D

    2014-09-01

    This paper identifies and reviews ethical issues associated with artificial intelligent care providers (AICPs) in mental health care and other helping professions. Specific recommendations are made for the development of ethical codes, guidelines, and the design of AICPs. Current developments in the application of AICPs and associated technologies are reviewed and a foundational overview of applicable ethical principles in mental health care is provided. Emerging ethical issues regarding the use of AICPs are then reviewed in detail. Recommendations for ethical codes and guidelines as well as for the development of semi-autonomous and autonomous AICP systems are described. The benefits of AICPs and implications for the helping professions are discussed in order to weigh the pros and cons of their use. Existing ethics codes and practice guidelines do not presently consider the current or the future use of interactive artificial intelligent agents to assist and to potentially replace mental health care professionals. AICPs present new ethical issues that will have significant ramifications for the mental health care and other helping professions. Primary issues involve the therapeutic relationship, competence, liability, trust, privacy, and patient safety. Many of the same ethical and philosophical considerations are applicable to use and design of AICPs in medicine, nursing, social work, education, and ministry. The ethical and moral aspects regarding the use of AICP systems must be well thought-out today as this will help to guide the use and development of these systems in the future. Topics presented are relevant to end users, AI developers, and researchers, as well as policy makers and regulatory boards. Published by Elsevier B.V.

  4. Human‐Centered Design: Integrating Services & Systems Around People By Providing A Common Ground for Action

    DEFF Research Database (Denmark)

    Junginger, Sabine

    2014-01-01

    to both professional fields. Yet, how human‐centered design is being practiced and applied depends on the interpretation of the concept, or the “designer’s stance” (Buchanan 2011). In this paper, I trace the shifts in design thinking and the role of people in service engineering and in service design. I...

  5. Patients' perspective of the design of provider-patients electronic communication services.

    Science.gov (United States)

    Silhavy, Petr; Silhavy, Radek; Prokopova, Zdenka

    2014-06-12

    Information Delivery is one the most important tasks in healthcare practice. This article discusses patient's tasks and perspectives, which are then used to design a new Effective Electronic Methodology. The system design methods applicable to electronic communication in the healthcare sector are also described. The architecture and the methodology for the healthcare service portal are set out in the proposed system design.

  6. 78 FR 38954 - Amended Order Designating the Provider of Legal Entity Identifiers to Be Used in Recordkeeping...

    Science.gov (United States)

    2013-06-28

    ... data reporting to use LEIs provided by DTCC-SWIFT, the utility designated by the CFTC as the provider of LEIs until establishment of the global LEI system. FOR FURTHER INFORMATION CONTACT: David Taylor...'') and to part 45 of the Commission's regulations, designating DTCC-SWIFT [[Page 38955

  7. Esprit de Place: Maintaining and Designing Library Buildings To Provide Transcendent Spaces.

    Science.gov (United States)

    Demas, Sam; Scherer, Jeffrey A.

    2002-01-01

    Discusses library buildings and their role in building community. Reviews current design trends, including reading and study spaces; collaborative workspaces; technology-free zones; archives and special collections; cultural events spaces; age-specific spaces; shared spaces; natural light and landscapes; and interior design trends. (LRW)

  8. Providing guidance in virtual lab experimentation : the case of an experiment design tool

    NARCIS (Netherlands)

    Efstathiou, Charalampos; Hovardas, Tasos; Xenofontos, Nikoletta A.; Zacharia, Zacharias C.; de Jong, Ton A.J.M.; Anjewierden, Anjo; van Riesen, Siswa A.N.

    2018-01-01

    The present study employed a quasi-experimental design to assess a computer-based tool, which was intended to scaffold the task of designing experiments when using a virtual lab for the process of experimentation. In particular, we assessed the impact of this tool on primary school students’

  9. Troubling Futures: Can Participatory Design Research provide a Constitutive Anthropology for the 21st Century?

    Directory of Open Access Journals (Sweden)

    Ann Light

    2015-10-01

    Full Text Available This paper argues there is value in considering participatory design as a form of anthropology at a time when we recognise that we need not only to understand cultures but to change them towards sustainable living. Holding up the democratically-oriented practices of some participatory design research to definitions of anthropology allows the essay to explore the role of intervention in social process. And, challenging definitional boundaries, it examines design as a participatory tool for cultural change, creating and interrogating futures (and the idea of futures. In analysing how designing moves towards change in the world, the paper brings together design research and anthropological concepts to help us better understand and operationalise our interventions and pursue them in a fair and sustainable manner.

  10. Patient- and Provider-Centered Design of an Outpatient Diabetes Technology Clinic

    OpenAIRE

    Cramer, Angela M.; Scalzo, Patricia; Bach, Sarah M.; Kudva, Yogish C.

    2016-01-01

    The number of US patients using diabetes technology is increasing, and sophisticated technologies continue to emerge. Patients using diabetes technology require access to providers prepared to offer care in this rapidly changing field. The authors sought to identify factors important to both patients using diabetes technology and providers caring for such patients. They redesigned the Diabetes Technology Clinic at an academic group practice in response to the needs of patients and providers. ...

  11. Completion plug design provides improved operational efficiency and safety while minimizing environmental risks

    Energy Technology Data Exchange (ETDEWEB)

    Dum, Frank [T.D. Williamson, Inc., Tulsa, OK (United States)

    2012-07-01

    Pipeline repair standards have been raised with recent improvements for completion plugs when used with a brand new setting tool, resulting in lower environmental risks, improved operational efficiency and safety. The design changes were originally made to serve in an offshore environment in order to minimize the diver's time in the water and simplify steps by the diver to execute pipeline repair operations in cold, dark conditions. Enhancements in the design include fewer number of fittings, plugs, o-rings and gaskets isolating the pipeline product found inside the pipe. The new design is a step toward meeting strict operational and safety standards demanded in the field of pipeline maintenance and repair. (author)

  12. Providing training enhances the biomechanical improvements of an alternative computer mouse design

    NARCIS (Netherlands)

    Houwink, A.; Oude Hengel, K.M.; Odell, D.; Dennerlein, J.T.

    2009-01-01

    To determine if an alternative mouse promotes more neutral postures and decreases forearm muscle activity and if training enhances these biomechanical benefits is the purpose of the study. Computer mouse use is a risk factor for developing musculoskeletal disorders; alternative mouse designs can

  13. Auroral Electrojet Index Designed to Provide a Global Measure, l-minute Intervals, of Auroral Zone Magnetic Activity

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Auroral Electrojet index (AE) is designed to provide a global quantitative measure of auroral zone magnetic activity produced by enhanced ionospheric currents...

  14. Auroral Electrojet Indices Designed to Provide a Global Measure, 2.5-Minute Intervals, of Auroral Zone Magnetic Activity

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Auroral Electrojet index (AE) is designed to provide a global quantitative measure of auroral zone magnetic activity produced by enhanced ionospheric currents...

  15. Design of Provider-Provisioned Website Protection Scheme against Malware Distribution

    Science.gov (United States)

    Yagi, Takeshi; Tanimoto, Naoto; Hariu, Takeo; Itoh, Mitsutaka

    Vulnerabilities in web applications expose computer networks to security threats, and many websites are used by attackers as hopping sites to attack other websites and user terminals. These incidents prevent service providers from constructing secure networking environments. To protect websites from attacks exploiting vulnerabilities in web applications, service providers use web application firewalls (WAFs). WAFs filter accesses from attackers by using signatures, which are generated based on the exploit codes of previous attacks. However, WAFs cannot filter unknown attacks because the signatures cannot reflect new types of attacks. In service provider environments, the number of exploit codes has recently increased rapidly because of the spread of vulnerable web applications that have been developed through cloud computing. Thus, generating signatures for all exploit codes is difficult. To solve these problems, our proposed scheme detects and filters malware downloads that are sent from websites which have already received exploit codes. In addition, to collect information for detecting malware downloads, web honeypots, which automatically extract the communication records of exploit codes, are used. According to the results of experiments using a prototype, our scheme can filter attacks automatically so that service providers can provide secure and cost-effective network environments.

  16. 31 CFR 539.306 - Goods, technology, or services produced or provided by a designated foreign person.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Goods, technology, or services..., technology, or services produced or provided by a designated foreign person. With respect to the prohibitions in §§ 539.201 and 539.202, the term goods, technology, or services produced or provided by a...

  17. The IPE Database: providing information on plant design, core damage frequency and containment performance

    International Nuclear Information System (INIS)

    Lehner, J.R.; Lin, C.C.; Pratt, W.T.; Su, T.; Danziger, L.

    1996-01-01

    A database, called the IPE Database has been developed that stores data obtained from the Individual Plant Examinations (IPEs) which licensees of nuclear power plants have conducted in response to the Nuclear Regulatory Commission's (NRC) Generic Letter GL88-20. The IPE Database is a collection of linked files which store information about plant design, core damage frequency (CDF), and containment performance in a uniform, structured way. The information contained in the various files is based on data contained in the IPE submittals. The information extracted from the submittals and entered into the IPE Database can be manipulated so that queries regarding individual or groups of plants can be answered using the IPE Database

  18. What the shark immune system can and cannot provide for the expanding design landscape of immunotherapy.

    Science.gov (United States)

    Criscitiello, Michael F

    2014-07-01

    Sharks have successfully lived in marine ecosystems, often atop food chains as apex predators, for nearly one and a half billion years. Throughout this period they have benefitted from an immune system with the same fundamental components found in terrestrial vertebrates like man. Additionally, sharks have some rather extraordinary immune mechanisms which mammals lack. In this review the author briefly orients the reader to sharks, their adaptive immunity, and their important phylogenetic position in comparative immunology. The author also differentiates some of the myths from facts concerning these animals, their cartilage, and cancer. From thereon, the author explores some of the more remarkable capabilities and products of shark lymphocytes. Sharks have an isotype of light chain-less antibodies that are useful tools in molecular biology and are moving towards translational use in the clinic. These special antibodies are just one of the several tricks of shark lymphocyte antigen receptor systems. While shark cartilage has not helped oncology patients, shark immunoglobulins and T cell receptors do offer exciting novel possibilities for immunotherapeutics. Much of the clinical immunology developmental pipeline has turned from traditional vaccines to passively delivered monoclonal antibody-based drugs for targeted depletion, activation, blocking and immunomodulation. The immunogenetic tools of shark lymphocytes, battle-tested since the dawn of our adaptive immune system, are well poised to expand the design landscape for the next generation of immunotherapy products.

  19. Developing and providing an online (web-based) clinical research design course in Japan: lessons learned.

    Science.gov (United States)

    Clark, Glenn T; Mulligan, Roseann; Baba, Kazuyoshi

    2011-04-01

    This article reports on the lessons learned while teaching an 8-week-long online course about the principles of clinical research design in Japan. Student activity data and how it relates to performance in the course are presented. As prolog, this article focuses on the barriers and solutions to creating and delivering a web-based course and it lists and discusses the most common concerns that educators often have about this process, namely, cost of the system and time requirement of the faculty. Options that must be considered when selecting the support software and hardware needed to conduct live streaming lecture, online video-based conference course are presented. The ancillary role of e-mail based distribution lists as an essential instruction tool within an interactive, instructor-supervised online course is discussed. This article then discusses the inclusion of active learning elements within an online course as well as the pros and cons regarding open-book versus closed book, proctored testing. Lastly, copyright issues the online instructor should know about are discussed. The student tracking data show that as the course progresses, students will reduce the number for page viewings. We speculate that this reduction is due to a combination of conflicting priorities plus increasing efficiency of the students at extracting the critical information. The article also concludes that software and hardware costs to deliver an online course are relatively minor but the faculty's time requirement is initially substantially higher than teaching in a conventional face-to-face course. Copyright © 2011 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

  20. Integrating Project Management, Product Design with Industry Sponsored Projects provides Stimulating Senior Capstone Experiences

    Directory of Open Access Journals (Sweden)

    Phillip A. Sanger

    2011-07-01

    Full Text Available

    Abstract ¾ Many students are uncomfortable with real world engineering problems where needs and requirements must be concretely defined and the selection of design solutions is not black and white. This paper describes a two semester, multi-disciplinary senior capstone project for students from three Engineering and Technology Department programs (electrical engineering, electrical and computer engineering technology, and engineering technology that brings together the tools of project management and the creative product development process into industry sponsored projects.  The projects are fully integrated with the Center for Rapid Product Realization with its dual goals of economic development and enhanced learning.  The stage/gate development process is used with six formal reviews covering the development of the proposal through to the fabrication and testing of the project’s output.  Over the past four years thirty five (35 projects have been undertaken with students getting an exciting

  1. Artificial intelligence and immediacy: designing health communication to personally engage consumers and providers.

    Science.gov (United States)

    Kreps, Gary L; Neuhauser, Linda

    2013-08-01

    We describe how ehealth communication programs can be improved by using artificial intelligence (AI) to increase immediacy. We analyzed major deficiencies in ehealth communication programs, illustrating how programs often fail to fully engage audiences and can even have negative consequences by undermining the effective delivery of information intended to guide health decision-making and influence adoption of health-promoting behaviors. We examined the use of AI in ehealth practices to promote immediacy and provided examples from the ChronologyMD project. Strategic use of AI is shown to help enhance immediacy in ehealth programs by making health communication more engaging, relevant, exciting, and actionable. AI can enhance the "immediacy" of ehealth by humanizing health promotion efforts, promoting physical and emotional closeness, increasing authenticity and enthusiasm in health promotion efforts, supporting personal involvement in communication interactions, increasing exposure to relevant messages, reducing demands on healthcare staff, improving program efficiency, and minimizing costs. User-centered AI approaches, such as the use of personally involving verbal and nonverbal cues, natural language translation, virtual coaches, and comfortable human-computer interfaces can promote active information processing and adoption of new ideas. Immediacy can improve information access, trust, sharing, motivation, and behavior changes. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

  2. Cathelicidins from the bullfrog Rana catesbeiana provides novel template for peptide antibiotic design.

    Directory of Open Access Journals (Sweden)

    Guiying Ling

    Full Text Available Cathelicidins, a class of gene-encoded effector molecules of vertebrate innate immunity, provide a first line of defense against microbial invasions. Although cathelicidins from mammals, birds, reptiles and fishes have been extensively studied, little is known about cathelicidins from amphibians. Here we report the identification and characterization of two cathelicidins (cathelicidin-RC1 and cathelicidin-RC2 from the bullfrog Rana catesbeiana. The cDNA sequences (677 and 700 bp, respectively encoding the two peptides were successfully cloned from the constructed lung cDNA library of R. catesbeiana. And the deduced mature peptides are composed of 28 and 33 residues, respectively. Structural analysis indicated that cathelicidin-RC1 mainly assumes an amphipathic alpha-helical conformation, while cathelicidin-RC2 could not form stable amphipathic structure. Antimicrobial and bacterial killing kinetic analysis indicated that the synthetic cathelicidin-RC1 possesses potent, broad-spectrum and rapid antimicrobial potency, while cathelicidin-RC2 exhibited very weak antimicrobial activity. Besides, the antimicrobial activity of cathelicidin-RC1 is salt-independent and highly stable. Scanning electron microscopy (SEM analysis indicated that cathelicidin-RC1 kills microorganisms through the disruption of microbial membrane. Moreover, cathelicidin-RC1 exhibited low cytotoxic activity against mammalian normal or tumor cell lines, and low hemolytic activity against human erythrocytes. The potent, broad-spectrum and rapid antimicrobial activity combined with the salt-independence, high stability, low cytotoxic and hemolytic activities make cathelicidin-RC1 an ideal template for the development of novel peptide antibiotics.

  3. Preliminary design and analysis of aluminum-air cells providing for continuous feed and full utilization of anodes

    Science.gov (United States)

    Cooper, J. F.

    1981-08-01

    The advantages, disadvantages, and engineering problem areas of the wedge shaped cells in anodes utilization are reviewed. The importance of solution side current collection to the practicality of this approach when used with alkaline electrolytes is identified. The relationship between cell height and total anode mass is derived for this and corresponding cells of the M1 design. It is concluded that the M1-CF design may provide the basis for an automotive battery of greater simplicity, reliability, and economy than earlier designs.

  4. The applicability of constructivist user studies: how can constructivist inquiry inform service providers and systems designers? Constructivist inquiry, Case study, Systems design, User behaviour

    Directory of Open Access Journals (Sweden)

    Alison Pickard

    2004-01-01

    Full Text Available This paper has attempted to clarify the ways in which individual, holistic case studies, produced via the process of constructivist inquiry, can be tested for trustworthiness and applied to other, similar situations. Service providers and systems designers need contextual information concerning their users in order to design and provide systems and services that will function effectively and efficiently within those contexts. Abstract models can only provide abstract insight into human behaviour and this is rarely sufficient detail upon which to base the planning and delivery of a service. The methodological issues which surround the applicability of individual, holistic case studies are discussed, explaining the concept of 'contextual applicability.' The relevance and usefulness of in-depth case study research to systems designers and service providers is highlighted.

  5. The Societe de Services Decentralises (SDD), a Franco-Dutch energy project designed to provide local energy services

    International Nuclear Information System (INIS)

    Klein, B.; Courillon, M.; Goedmakers, A-M.; Darne, D.

    1998-01-01

    The Societe de Services Decentralises (SDD) is a joint pilot project of the EDF from France and NUON from the Netherlands, designed to test the feasibility of providing electricity to the rural regions of developing countries. The concept of the SDD emerged from the 1995 Marrakech conference on rural electrification. The project is presently being tested in Mali where 80,000 people, living in 20 villages of the cotton region are being provided with basic electric services. Power is generated by small village generating stations or by solar stations. Service is limited to a few electrical lights per customer. Marketing, financing and human resource aspects are also discussed

  6. Opportunities Provided by the Design of a Website Focused on the Promotion of Collaborative Projects Within European IT Industry

    Directory of Open Access Journals (Sweden)

    Alexandru CAPATINA

    2011-11-01

    Full Text Available Our paper emphasizes the opportunities provided both for the academic research and business partnerships by the design of a website which promotes the collaborative projects within European IT industry. From the academic perspective, the companies registered in the website database will represent the sample for different researches focused on cross-cultural interactions, intellectual capital components and competitive intelligence strategies. From the business perspective, the registration of the companies will allow the access to the list with all the potential future partners’ in the field of software development. In the first part of the paper dedicated to literature review, we highlighted the main types of IT collaborative projects; then, we presented the tools provided by the website that was designed in view to increase the awareness of the European IT companies. In the last part of the paper, we tested by means of chi-square statistical method the correlation between R&D investments and average length of time for software design in the case of a sample of 58 IT companies included in the database. We also revealed our future research intentions related to the domain of IT partnerships patterns.

  7. The management of dental caries in primary teeth - involving service providers and users in the design of a trial.

    Science.gov (United States)

    Marshman, Zoe; Innes, Nicola; Deery, Chris; Hall, Melanie; Speed, Chris; Douglas, Gail; Clarkson, Jan; Rodd, Helen

    2012-08-22

    There is a lack of evidence for the effective management of dental caries in children's primary teeth. The trial entitled 'Filling Children's Teeth: Indicated Or Not?' (FiCTION) was designed to examine the clinical and cost effectiveness, in primary dental care, of three different approaches to the management of caries in primary teeth. However, before the FiCTION main trial commenced, a pilot trial was designed. Service provider (dentists and other members of the team including dental nurses and practice managers) and participant (child participants and their parents) involvement was incorporated into the pilot trial. The aim of this study is to describe service providers' and users' perspectives on the pilot trial to identify improvements to the conduct and design of the FiCTION main trial. Qualitative interviews (individual and group) were held with dentists, dental team members, children and parents involved in the FiCTION pilot trial. Individual interviews were held with four dentists and a group interview was held with 17 dental team members. Face-to-face interviews were held with four parents and children (four- to eight-years old) representing the three arms of the trial and five telephone interviews were conducted with parents. All interviews were transcribed verbatim. Framework analysis was used. Overall, service providers, children and parents found the pilot trial to be well conducted and an interesting experience. Service providers highlighted the challenges of adhering to research protocols, especially managing the documentation and undertaking new clinical techniques. They indicated that the time and financial commitments were greater than they had anticipated. Particular difficulties were found recruiting suitable patients within the timeframe. For parents recruitment was apparently more related to trusting their dentist than the content of information packs. While some of the older children understood what a study was, others did not understand or

  8. Parallel experimental design and multivariate analysis provides efficient screening of cell culture media supplements to improve biosimilar product quality.

    Science.gov (United States)

    Brühlmann, David; Sokolov, Michael; Butté, Alessandro; Sauer, Markus; Hemberger, Jürgen; Souquet, Jonathan; Broly, Hervé; Jordan, Martin

    2017-07-01

    Rational and high-throughput optimization of mammalian cell culture media has a great potential to modulate recombinant protein product quality. We present a process design method based on parallel design-of-experiment (DoE) of CHO fed-batch cultures in 96-deepwell plates to modulate monoclonal antibody (mAb) glycosylation using medium supplements. To reduce the risk of losing valuable information in an intricate joint screening, 17 compounds were separated into five different groups, considering their mode of biological action. The concentration ranges of the medium supplements were defined according to information encountered in the literature and in-house experience. The screening experiments produced wide glycosylation pattern ranges. Multivariate analysis including principal component analysis and decision trees was used to select the best performing glycosylation modulators. Subsequent D-optimal quadratic design with four factors (three promising compounds and temperature shift) in shake tubes confirmed the outcome of the selection process and provided a solid basis for sequential process development at a larger scale. The glycosylation profile with respect to the specifications for biosimilarity was greatly improved in shake tube experiments: 75% of the conditions were equally close or closer to the specifications for biosimilarity than the best 25% in 96-deepwell plates. Biotechnol. Bioeng. 2017;114: 1448-1458. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

  9. Perspective of patients, patients' families, and healthcare providers towards designing and delivering hospice care services in a middle income Country.

    Science.gov (United States)

    Azami-Aghdash, Saber; Ghojazadeh, Morteza; Aghaei, Mir Hossein; Naghavi-Behzad, Mohammad; Asgarlo, Zoleikha

    2015-01-01

    In view of the recent surge in chronic disease rates and elderly population in the developing countries, there is an urgent felt need for palliative and hospice care services. The present study investigates the views and attitudes of patients and their families, physicians, nurses, healthcare administrators, and insurers regarding designing and delivering hospice care service in a middle income country. In this qualitative study, the required data was collected using semi structured interviews and was analyzed using thematic analysis. Totally 65 participants from hospitals and Tabriz University of Medical Sciences were selected purposively to achieve data saturation. Analyzing the data, five main themes (barriers, facilitators, strategies, attitudes, and service provider) were extracted. Barriers included financial issues, cultural-religious beliefs, patient and family-related obstacles, and barriers related to healthcare system. Facilitators included family-related issues, cultural-religious beliefs, as well as facilitators associated with patients, healthcare status, and benefits of hospice service. Most participants (79%) had positive attitude towards hospice care service. Participant suggested 10 ways to design and deliver effective and efficient hospice care service. They thought the presence of physicians, nurses, and psychologists and other specialists and clergy were necessary in the hospice care team. Due to lack of experience in hospice care in developing countries, research for identifying probable barriers and appropriate management for reducing unsuccessfulness in designing and delivering hospice care service seems necessary. Input from the facilitators and their suggested solutions can be useful in planning the policy for hospice care system.

  10. Designing an implementation intervention with the Behaviour Change Wheel for health provider smoking cessation care for Australian Indigenous pregnant women.

    Science.gov (United States)

    Gould, Gillian S; Bar-Zeev, Yael; Bovill, Michelle; Atkins, Lou; Gruppetta, Maree; Clarke, Marilyn J; Bonevski, Billie

    2017-09-15

    providers at Aboriginal Medical Services in how to implement culturally competent evidence-based practice including counselling and nicotine replacement therapy for pregnant patients who smoke. The BCW aided in scientifically and systematically informing this targeted implementation intervention based on the identified gaps in SCC by health providers. Multiple factors impact at systemic, provider, community and individual levels. This process was therefore important for defining the design and intervention components, prior to a conducting a pilot feasibility trial, then leading on to a full clinical trial.

  11. Crystal structures of mammalian glutamine synthetases illustrate substrate-induced conformational changes and provide opportunities for drug and herbicide design.

    Science.gov (United States)

    Krajewski, Wojciech W; Collins, Ruairi; Holmberg-Schiavone, Lovisa; Jones, T Alwyn; Karlberg, Tobias; Mowbray, Sherry L

    2008-01-04

    Glutamine synthetase (GS) catalyzes the ligation of glutamate and ammonia to form glutamine, with concomitant hydrolysis of ATP. In mammals, the activity eliminates cytotoxic ammonia, at the same time converting neurotoxic glutamate to harmless glutamine; there are a number of links between changes in GS activity and neurodegenerative disorders, such as Alzheimer's disease. In plants, because of its importance in the assimilation and re-assimilation of ammonia, the enzyme is a target of some herbicides. GS is also a central component of bacterial nitrogen metabolism and a potential drug target. Previous studies had investigated the structures of bacterial and plant GSs. In the present publication, we report the first structures of mammalian GSs. The apo form of the canine enzyme was solved by molecular replacement and refined at a resolution of 3 A. Two structures of human glutamine synthetase represent complexes with: a) phosphate, ADP, and manganese, and b) a phosphorylated form of the inhibitor methionine sulfoximine, ADP and manganese; these structures were refined to resolutions of 2.05 A and 2.6 A, respectively. Loop movements near the active site generate more closed forms of the eukaryotic enzymes when substrates are bound; the largest changes are associated with the binding of the nucleotide. Comparisons with earlier structures provide a basis for the design of drugs that are specifically directed at either human or bacterial enzymes. The site of binding the amino acid substrate is highly conserved in bacterial and eukaryotic GSs, whereas the nucleotide binding site varies to a much larger degree. Thus, the latter site offers the best target for specific drug design. Differences between mammalian and plant enzymes are much more subtle, suggesting that herbicides targeting GS must be designed with caution.

  12. Conceptual design considerations for providing hook-up type schemes for tracking beyond design basis events (BDBE) for 700 MWe PHWR project

    International Nuclear Information System (INIS)

    Vhora, S.F.; Inder Jit; Bhardwaj, S.A.

    2005-01-01

    A broad review of major nuclear accidents such as Chernobyl reveals that provision of access to the reactor core for cooling purpose had to be made from outside the reactor building by tunneling. Also the NAPS fire incident could be mitigated once the fire water injection to the steam generators could be ensured. In this case the boiler room which was outside the primary containment was accessible relatively easily for mitigation after the initial period. Both of the above had accident scenarios which can be termed Beyond Design Basis (BDBE) since the accident initiation/scenario did not fit into the events under postulated initiating events (PIES) or Design Basis Events (DBEs). These accidents or events reveal that some sort of access to the core or the components inside the Reactor building becomes necessary. It is also to be noted that manual intervention beyond the initial period of half an hour or earlier in the Emergency operating procedure (EOP) is inevitably called for as a recovery action in order to mitigate the severity and minimize long term consequences. This paper attempts to discuss the type of concepts which can give access to the core or associated systems which can then provide continued heat sink. The discussions would include the criteria for design of such concepts and give examples of such concepts already implemented and proposes schemes to be implemented in the 700 MWe Project. (author)

  13. The design of a high-efficiency neutron counter for waste drums to provide optimized sensitivity for plutonium assay

    Energy Technology Data Exchange (ETDEWEB)

    Menlove, H.O.; Beddingfield, D.H.; Pickrell, M.M. [Los Alamos National Lab., NM (United States)] [and others

    1997-11-01

    An advanced passive neutron counter has been designed to improve the accuracy and sensitivity for the nondestructive assay of plutonium in scrap and waste containers. The High-Efficiency Neutron Counter (HENC) was developed under a Cooperative Research Development Agreement between the Los Alamos National Laboratory and Canberra Industries. The primary goal of the development was to produce a passive assay system for 200-L drums that has detectability limits and multiplicity counting features that are superior to previous systems. A detectability limit figure of merit (FOM) was defined that included the detector efficiency, the neutron die-away time, and the detector`s active volume and density that determine the cosmic-ray background. Monte Carlo neutron calculations were performed to determine the parameters to provide an optimum FOM. The system includes the {sup 252}Cf {open_quotes}add-a-source{close_quotes} feature to improve the accuracy as well as statistical filters to reduce the cosmic-ray spallation neutron background. The final decision gave an efficiency of 32% for plutonium with a detector {sup 3}He tube volume that is significantly smaller than for previous high-efficiency systems for 200-L drums. Because of the high efficiency of the HENC, we have incorporated neutron multiplicity counting for matrix corrections for those cases where the plutonium is localized in nonuniform hydrogenous materials. The paper describes the design and performance testing of the advanced system. 5 refs., 8 figs., 3 tabs.

  14. The design of a high-efficiency neutron counter for waste drums to provide optimized sensitivity for plutonium assay

    International Nuclear Information System (INIS)

    Menlove, H.O.; Beddingfield, D.H.; Pickrell, M.M.

    1997-01-01

    An advanced passive neutron counter has been designed to improve the accuracy and sensitivity for the nondestructive assay of plutonium in scrap and waste containers. The High-Efficiency Neutron Counter (HENC) was developed under a Cooperative Research Development Agreement between the Los Alamos National Laboratory and Canberra Industries. The primary goal of the development was to produce a passive assay system for 200-L drums that has detectability limits and multiplicity counting features that are superior to previous systems. A detectability limit figure of merit (FOM) was defined that included the detector efficiency, the neutron die-away time, and the detector's active volume and density that determine the cosmic-ray background. Monte Carlo neutron calculations were performed to determine the parameters to provide an optimum FOM. The system includes the 252 Cf open-quotes add-a-sourceclose quotes feature to improve the accuracy as well as statistical filters to reduce the cosmic-ray spallation neutron background. The final decision gave an efficiency of 32% for plutonium with a detector 3 He tube volume that is significantly smaller than for previous high-efficiency systems for 200-L drums. Because of the high efficiency of the HENC, we have incorporated neutron multiplicity counting for matrix corrections for those cases where the plutonium is localized in nonuniform hydrogenous materials. The paper describes the design and performance testing of the advanced system. 5 refs., 8 figs., 3 tabs

  15. Designing area optimized application-specific network-on-chip architectures while providing hard QoS guarantees.

    Directory of Open Access Journals (Sweden)

    Sajid Gul Khawaja

    Full Text Available With the increase of transistors' density, popularity of System on Chip (SoC has increased exponentially. As a communication module for SoC, Network on Chip (NoC framework has been adapted as its backbone. In this paper, we propose a methodology for designing area-optimized application specific NoC while providing hard Quality of Service (QoS guarantees for real time flows. The novelty of the proposed system lies in derivation of a Mixed Integer Linear Programming model which is then used to generate a resource optimal Network on Chip (NoC topology and architecture while considering traffic and QoS requirements. We also present the micro-architectural design features used for enabling traffic and latency guarantees and discuss how the solution adapts for dynamic variations in the application traffic. The paper highlights the effectiveness of proposed method by generating resource efficient NoC solutions for both industrial and benchmark applications. The area-optimized results are generated in few seconds by proposed technique, without resorting to heuristics, even for an application with 48 traffic flows.

  16. Trifocal intraocular lenses: a comparison of the visual performance and quality of vision provided by two different lens designs

    Directory of Open Access Journals (Sweden)

    Gundersen KG

    2017-06-01

    Full Text Available Kjell G Gundersen,1 Rick Potvin2 1IFocus Øyeklinikk AS, Haugesund, Norway; 2Science in Vision, Akron, NY, USA Purpose: To compare two different diffractive trifocal intraocular lens (IOL designs, evaluating longer-term refractive outcomes, visual acuity (VA at various distances, low contrast VA and quality of vision.Patients and methods: Patients with binocularly implanted trifocal IOLs of two different designs (FineVision [FV] and Panoptix [PX] were evaluated 6 months to 2 years after surgery. Best distance-corrected and uncorrected VA were tested at distance (4 m, intermediate (80 and 60 cm and near (40 cm. A binocular defocus curve was collected with the subject’s best distance correction in place. The preferred reading distance was determined along with the VA at that distance. Low contrast VA at distance was also measured. Quality of vision was measured with the National Eye Institute Visual Function Questionnaire near subset and the Quality of Vision questionnaire.Results: Thirty subjects in each group were successfully recruited. The binocular defocus curves differed only at vergences of −1.0 D (FV better, P=0.02, −1.5 and −2.00 D (PX better, P<0.01 for both. Best distance-corrected and uncorrected binocular vision were significantly better for the PX lens at 60 cm (P<0.01 with no significant differences at other distances. The preferred reading distance was between 42 and 43 cm for both lenses, with the VA at the preferred reading distance slightly better with the PX lens (P=0.04. There were no statistically significant differences by lens for low contrast VA (P=0.1 or for quality of vision measures (P>0.3.Conclusion: Both trifocal lenses provided excellent distance, intermediate and near vision, but several measures indicated that the PX lens provided better intermediate vision at 60 cm. This may be important to users of tablets and other handheld devices. Quality of vision appeared similar between the two lens designs

  17. A co-design process developing heuristics for practitioners providing end of life care for people with dementia.

    Science.gov (United States)

    Davies, Nathan; Mathew, Rammya; Wilcock, Jane; Manthorpe, Jill; Sampson, Elizabeth L; Lamahewa, Kethakie; Iliffe, Steve

    2016-08-02

    The end of life for someone with dementia can present many challenges for practitioners; such as, providing care if there are swallowing difficulties. This study aimed to develop a toolkit of heuristics (rules-of-thumb) to aid practitioners making end-of-life care decisions for people with dementia. An iterative co-design approach was adopted using a literature review and qualitative methods, including; 1) qualitative interviews and focus groups with family carers and 2) focus groups with health and care professionals. Family carers were recruited from a national charity, purposively sampling those with experience of end-of-life care for a person with dementia. Health and care professionals were purposively sampled to include a broad range of expertise including; general practitioners, palliative care specialists, and geriatricians. A co-design group was established consisting of health and social care experts and family carers, to synthesise the findings from the qualitative work and produce a toolkit of heuristics to be tested in practice. Four broad areas were identified as requiring complex decisions at the end of life; 1) eating/swallowing difficulties, 2) agitation/restlessness, 3) ending life-sustaining treatment, and 4) providing "routine care" at the end of life. Each topic became a heuristic consisting of rules arranged into flowcharts. Eating/swallowing difficulties have three rules; ensuring eating/swallowing difficulties do not come as a surprise, considering if the situation is an emergency, and considering 'comfort feeding' only versus time-trialled artificial feeding. Agitation/restlessness encourages a holistic approach, considering the environment, physical causes, and the carer's wellbeing. Ending life-sustaining treatment supports practitioners through a process of considering the benefits of treatment versus quality-of-life and comfort. Finally, a heuristic on providing routine care such as bathing, prompts practitioners to consider adapting

  18. Enhancing organizational capacity to provide cancer control programs among Latino churches: design and baseline findings of the CRUZA Study.

    Science.gov (United States)

    Allen, Jennifer D; Torres, Maria Idali; Tom, Laura S; Rustan, Sarah; Leyva, Bryan; Negron, Rosalyn; Linnan, Laura A; Jandorf, Lina; Ospino, Hosffman

    2015-04-09

    Faith-based organizations (FBOs) have been successful in delivering health promotion programs for African Americans, though few studies have been conducted among Latinos. Even fewer have focused on organizational change, which is required to sustain community-based initiatives. We hypothesized that FBOs serving Latinos would be more likely to offer evidence-based strategies (EBS) for cancer control after receiving a capacity enhancement intervention to implement health programs, and designed the CRUZA trial to test this hypothesis. This paper describes the CRUZA design and baseline findings. We identified Catholic parishes in Massachusetts that provided Spanish-language mass (n = 65). A baseline survey assessed organizational characteristics relevant to adoption of health programs, including readiness for adoption, "fit" between innovation and organizational mission, implementation climate, and organizational culture. In the next study phase, parishes that completed the baseline assessment will be recruited to a randomized cluster trial, with the parish as the unit of analysis. Both groups will receive a Program Manual and Toolkit. Capacity Enhancement parishes will also be offered technical support, assistance forming health committees and building inter-institutional partnerships, and skills-based training. Of the 49 parishes surveyed at baseline (75%), one-third (33%) reported having provided at least one health program in the prior year. However, only two program offerings were cancer-specific. Nearly one-fifth (18%) had an active health ministry. There was a high level of organizational readiness to adopt cancer control programs, high congruence between parish missions and CRUZA objectives, moderately conducive implementation climates, and organizational cultures supportive of CRUZA programming. Having an existing health ministry was significantly associated with having offered health programs within the past year. Relationships between health program

  19. Remote maintenance systems requirements are being developed to provide design guidelines for machine components, to define maintenance interfaces, and to quantify maintenance equipment and procedures needed

    International Nuclear Information System (INIS)

    Spampinato, P.T.; Tabor, M.A.

    1988-01-01

    Remote maintenance systems requirements are being developed to provide design guidelines for machine components, to define maintenance interfaces, and to quantify maintenance equipment and procedures needed

  20. Substrate-Integrated Waveguide PCB Leaky-Wave Antenna Design Providing Multiple Steerable Beams in the V-Band

    Directory of Open Access Journals (Sweden)

    Matthias Steeg

    2017-12-01

    Full Text Available A periodic leaky-wave antenna (LWA design based on low loss substrate-integrated waveguide (SIW technology with inset half-wave microstrip antennas is presented. The developed LWA operates in the V-band between 50 and 70 GHz and has been fabricated using standard printed circuit board (PCB technology. The presented LWA is highly functional and very compact supporting 1D beam steering and multibeam operation with only a single radio frequency (RF feeding port. Within the operational 50–70 GHz bandwidth, the LWA scans through broadside, providing over 40° H-plane beam steering. When operated within the 57–66 GHz band, the maximum steering angle is 18.2°. The maximum gain of the fabricated LWAs is 15.4 dBi with only a small gain variation of +/−1.5 dB across the operational bandwidth. The beam steering and multibeam capability of the fabricated LWA is further utilized to support mobile users in a 60 GHz hot-spot. For a single user, a maximum wireless on-off keying (OOK data rate of 2.5 Gbit/s is demonstrated. Multibeam operation is achieved using the LWA in combination with multiple dense wavelength division multiplexing (WDM channels and remote optical heterodyning. Experimentally, multibeam operation supporting three users within a 57–66 GHz hot-spot with a total wireless cell capacity of 3 Gbit/s is achieved.

  1. Testing of tunnel support : dynamic load testing of rockbolt elements to provide data for safer support design.

    CSIR Research Space (South Africa)

    Ortlepp, WD

    1998-06-01

    Full Text Available This research report discusses the development of a realistic and controllable method of testing support tendons dynamically, which has been achieved in this research project, offers a new and fresh opportunity for improving the design methodology...

  2. Perspective of patients, patients' families, and healthcare providers towards designing and delivering hospice care services in a middle income Country

    Directory of Open Access Journals (Sweden)

    Saber Azami-Aghdash

    2015-01-01

    Conclusion: Due to lack of experience in hospice care in developing countries, research for identifying probable barriers and appropriate management for reducing unsuccessfulness in designing and delivering hospice care service seems necessary. Input from the facilitators and their suggested solutions can be useful in planning the policy for hospice care system.

  3. Designing a system for patients controlling providers' access to their electronic health records: organizational and technical challenges.

    Science.gov (United States)

    Leventhal, Jeremy C; Cummins, Jonathan A; Schwartz, Peter H; Martin, Douglas K; Tierney, William M

    2015-01-01

    Electronic health records (EHRs) are proliferating, and financial incentives encourage their use. Applying Fair Information Practice principles to EHRs necessitates balancing patients' rights to control their personal information with providers' data needs to deliver safe, high-quality care. We describe the technical and organizational challenges faced in capturing patients' preferences for patient-controlled EHR access and applying those preferences to an existing EHR. We established an online system for capturing patients' preferences for who could view their EHRs (listing all participating clinic providers individually and categorically-physicians, nurses, other staff) and what data to redact (none, all, or by specific categories of sensitive data or patient age). We then modified existing data-viewing software serving a state-wide health information exchange and a large urban health system and its primary care clinics to allow patients' preferences to guide data displays to providers. Patients could allow or restrict data displays to all clinicians and staff in a demonstration primary care clinic, categories of providers (physicians, nurses, others), or individual providers. They could also restrict access to all EHR data or any or all of five categories of sensitive data (mental and reproductive health, sexually transmitted diseases, HIV/AIDS, and substance abuse) and for specific patient ages. The EHR viewer displayed data via reports, data flowsheets, and coded and free text data displayed by Google-like searches. Unless patients recorded restrictions, by default all requested data were displayed to all providers. Data patients wanted restricted were not displayed, with no indication they were redacted. Technical barriers prevented redacting restricted information in free textnotes. The program allowed providers to hit a "Break the Glass" button to override patients' restrictions, recording the date, time, and next screen viewed. Establishing patient

  4. A randomized trial of the impact of survey design characteristics on response rates among nursing home providers.

    Science.gov (United States)

    Clark, Melissa; Rogers, Michelle; Foster, Andrew; Dvorchak, Faye; Saadeh, Frances; Weaver, Jessica; Mor, Vincent

    2011-12-01

    An experiment was conducted to maximize participation of both the Director of Nursing (DoN) and the Administrator (ADMIN) in long-term care facilities. Providers in each of the 224 randomly selected facilities were randomly assigned to 1 of 16 conditions based on the combination of data collection mode (web vs. mail), questionnaire length (short vs. long), and incentive structure. Incentive structures were determined by amount compensated if the individual completed and an additional amount per individual if the pair completed (a) $30 individual/$5 pair/$35 total; (b) $10 individual/$25 pair/$35 total; (c) $30 individual/$20 pair/$50 total; and (d) $10 individual/$40 pair/$50 total. Overall, 47.4% of eligible respondents participated; both respondents participated in 29.3% of facilities. In multivariable analyses, there were no differences in the likelihood of both respondents participating by mode, questionnaire length, or incentive structure. Providing incentives contingent on participation by both providers of a facility was an ineffective strategy for significantly increasing response rates.

  5. Incentive-based demand response programs designed by asset-light retail electricity providers for the day-ahead market

    International Nuclear Information System (INIS)

    Fotouhi Ghazvini, Mohammad Ali; Faria, Pedro; Ramos, Sergio; Morais, Hugo; Vale, Zita

    2015-01-01

    Following the deregulation experience of retail electricity markets in most countries, the majority of the new entrants of the liberalized retail market were pure REP (retail electricity providers). These entities were subject to financial risks because of the unexpected price variations, price spikes, volatile loads and the potential for market power exertion by GENCO (generation companies). A REP can manage the market risks by employing the DR (demand response) programs and using its' generation and storage assets at the distribution network to serve the customers. The proposed model suggests how a REP with light physical assets, such as DG (distributed generation) units and ESS (energy storage systems), can survive in a competitive retail market. The paper discusses the effective risk management strategies for the REPs to deal with the uncertainties of the DAM (day-ahead market) and how to hedge the financial losses in the market. A two-stage stochastic programming problem is formulated. It aims to establish the financial incentive-based DR programs and the optimal dispatch of the DG units and ESSs. The uncertainty of the forecasted day-ahead load demand and electricity price is also taken into account with a scenario-based approach. The principal advantage of this model for REPs is reducing the risk of financial losses in DAMs, and the main benefit for the whole system is market power mitigation by virtually increasing the price elasticity of demand and reducing the peak demand. - Highlights: • Asset-light electricity retail providers subject to financial risks. • Incentive-based demand response program to manage the financial risks. • Maximizing the payoff of electricity retail providers in day-ahead market. • Mixed integer nonlinear programming to manage the risks

  6. Design and construction of a cryogenic facility providing absolute measurements of radon 222 activity for developing a primary standard

    International Nuclear Information System (INIS)

    Picolo, Jean-Louis

    1995-06-01

    Radon 222 metrology is required to obtain higher accuracy in assessing human health risks from exposure to natural radiation. This paper describes the development of a cryogenic facility that allows absolute measurements of radon 222 in order to obtain a primary standard. The method selected is the condensation of a radon 222 sample on a geometrically defined cold surface with a constant, well known and adjustable temperature and facing an alpha particles detector. Counting of the alpha particles reaching the detector and the precisely known detection geometry provide an absolute measurement of the source activity. After describing the cryogenic facility, the measurement accuracy and precision are discussed and a comparison made with other measurement systems. The relative uncertainty is below 1 pc (1 σ). The facility can also be used to improve our knowledge of the nuclear properties of radon 222 and to produce secondary standards. (author) [fr

  7. Association between women veterans' experiences with VA outpatient health care and designation as a women's health provider in primary care clinics.

    Science.gov (United States)

    Bastian, Lori A; Trentalange, Mark; Murphy, Terrence E; Brandt, Cynthia; Bean-Mayberry, Bevanne; Maisel, Natalya C; Wright, Steven M; Gaetano, Vera S; Allore, Heather; Skanderson, Melissa; Reyes-Harvey, Evelyn; Yano, Elizabeth M; Rose, Danielle; Haskell, Sally

    2014-01-01

    Women veterans comprise a small percentage of Department of Veterans Affairs (VA) health care users. Prior research on women veterans' experiences with primary care has focused on VA site differences and not individual provider characteristics. In 2010, the VA established policy requiring the provision of comprehensive women's health care by designated women's health providers (DWHPs). Little is known about the quality of health care delivered by DWHPs and women veterans' experience with care from these providers. Secondary data were obtained from the VA Survey of Healthcare Experience of Patients (SHEP) using the Consumer Assessment of Healthcare Providers and Systems (CAHPS) patient-centered medical home (PCMH) survey from March 2012 through February 2013, a survey designed to measure patient experience with care and the DWHPs Assessment of Workforce Capacity that discerns between DWHPs versus non-DWHPs. Of the 28,994 surveys mailed to women veterans, 24,789 were seen by primary care providers and 8,151 women responded to the survey (response rate, 32%). A total of 3,147 providers were evaluated by the SHEP-CAHPS-PCMH survey (40%; n = 1,267 were DWHPs). In a multivariable model, patients seen by DWHPs (relative risk, 1.02; 95% CI, 1.01-1.04) reported higher overall experiences with care compared with patients seen by non-DWHPs. The main finding is that women veterans' overall experiences with outpatient health care are slightly better for those receiving care from DWHPs compared with those receiving care from non-DWHPs. Our findings have important policy implications for how to continue to improve women veterans' experiences. Our work provides support to increase access to DWHPs at VA primary care clinics. Published by Elsevier Inc.

  8. The German electricity market. Does the present market design provide security of supply?; Strommarkt in Deutschland. Gewaehrleistet das derzeitige Marktdesign Versorgungssicherheit?

    Energy Technology Data Exchange (ETDEWEB)

    Janssen, Matthias; Peichert, Patrick; Perner, Jens; Riechmann, Christoph [Frontier Economics, Koeln (Germany); Niedrig, Thomas [Formaet Services GmbH, Rheinbach (Germany)

    2014-09-15

    A heated discussion is being waged in Germany and large parts of Europe over the introduction of what are referred to as capacity mechanisms, whose purpose is to provide security of supply in the electricity sector. In this context two consulting firms have undertaken a both qualitative and quantitative study of the fitness of the present market design, which is based on the ''Energy-Only Market'' (EOM), to provide security of supply in the German electricity market. The authors come to the conclusion that, if suitably framed, the EOM can continue to provide a secure electricity supply in accordance with consumer preferences and at the lowest possible cost.

  9. An internet tool for creation of cancer survivorship care plans for survivors and health care providers: design, implementation, use and user satisfaction.

    Science.gov (United States)

    Hill-Kayser, Christine E; Vachani, Carolyn; Hampshire, Margaret K; Jacobs, Linda A; Metz, James M

    2009-09-04

    Survivorship care plans have been recommended by the Institute of Medicine for all cancer survivors. We implemented an Internet-based tool for creation of individualized survivorship care plans. To our knowledge, this is the first tool of this type to be designed and made publicly accessible. To investigate patterns of use and satisfaction with an Internet-based tool for creation of survivorship care plans. OncoLife, an Internet-based program for creation of survivorship care plans, was designed by a team of dedicated oncology nurses and physicians at the University of Pennsylvania. The program was designed to provide individualized, comprehensive health care recommendations to users responding to queries regarding demographics, diagnosis, and cancer treatments. After being piloted to test populations, OncoLife was made publicly accessible via Oncolink, a cancer information website based at the University of Pennsylvania which averages 3.9 million page views and over 385,000 unique visits per month. Data entered by anonymous public users was maintained and analyzed. From May 2007 to November 2008, 3343 individuals utilized this tool. Most (63%) identified themselves as survivors, but also health care providers (25%) and friends/family of survivors (12%). Median age at diagnosis was 48 years (18-100+), and median current age 51 (19-100+). Most users were Caucasian (87%), female (71%), and college-educated (82%). Breast cancer was the most common diagnosis (46%), followed by hematologic (12%), gastrointestinal (11%), gynecologic (9%), and genitourinary (8%). Of all users, 84% had undergone surgery, 80% chemotherapy, and 60% radiotherapy. Half of users (53%) reported receiving follow-up care from only an oncologist, 13% only a primary care provider (PCP), and 32% both; 12% reported having received survivorship information previously. Over 90% of users, both survivors and health care providers, reported satisfaction levels of "good" to "excellent" using this tool

  10. Medicare Provider Data - Hospice Providers

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Hospice Utilization and Payment Public Use File provides information on services provided to Medicare beneficiaries by hospice providers. The Hospice PUF...

  11. Using a quality improvement model to enhance providers' performance in maternal and newborn health care: a post-only intervention and comparison design.

    Science.gov (United States)

    Ayalew, Firew; Eyassu, Gizachew; Seyoum, Negash; van Roosmalen, Jos; Bazant, Eva; Kim, Young Mi; Tekleberhan, Alemnesh; Gibson, Hannah; Daniel, Ephrem; Stekelenburg, Jelle

    2017-04-12

    The Standards Based Management and Recognition (SBM-R © ) approach to quality improvement has been implemented in Ethiopia to strengthen routine maternal and newborn health (MNH) services. This evaluation assessed the effect of the intervention on MNH providers' performance of routine antenatal care (ANC), uncomplicated labor and delivery and immediate postnatal care (PNC) services. A post-only evaluation design was conducted at three hospitals and eight health centers implementing SBM-R and the same number of comparison health facilities. Structured checklists were used to observe MNH providers' performance on ANC (236 provider-client interactions), uncomplicated labor and delivery (226 provider-client interactions), and immediate PNC services in the six hours after delivery (232 provider-client interactions); observations were divided equally between intervention and comparison groups. Main outcomes were provider performance scores, calculated as the percentage of essential tasks in each service area completed by providers. Multilevel analysis was used to calculate adjusted mean percentage performance scores and standard errors to compare intervention and comparison groups. There was no statistically significant difference between intervention and comparison facilities in overall mean performance scores for ANC services (63.4% at intervention facilities versus 61.0% at comparison facilities, p = 0.650) or in any specific ANC skill area. MNH providers' overall mean performance score for uncomplicated labor and delivery care was 11.9 percentage points higher in the intervention than in the comparison group (77.5% versus 65.6%; p = 0.002). Overall mean performance scores for immediate PNC were 22.2 percentage points higher at intervention than at comparison facilities (72.8% versus 50.6%; p = 0.001); and there was a significant difference of 22 percentage points between intervention and comparison facilities for each PNC skill area: care for the newborn

  12. A new QRT-PCR assay designed for the differentiation between elements provided from Agrobacterium sp. in GMOs plant events and natural Agrobacterium sp. bacteria.

    Science.gov (United States)

    Nabi, Nesrine; Chaouachi, Maher; Zellama, Mohamed Salem; Ben Hafsa, Ahmed; Mrabet, Besma; Saïd, Khaled; Fathia, Harzallah Skhiri

    2016-04-01

    The question asked in the present work was how to differentiate between contamination of field samples with and GM plants contained sequences provided from this bacterium in order to avoid false positives in the frame of the detection and the quantification of GMO. For this, new set of primers and corresponding TaqMan Minor Groove Binder (MGB) probes were designed to target Agrobacterium sp. using the tumor-morphology-shooty gene (TMS1). Final standard curves were calculated for each pathogen by plotting the threshold cycle value against the bacterial number (log (colony forming units) per milliliter) via linear regression. The method designed was highly specific and sensitive, with a detection limit of 10CFU/ml. No significant cross-reaction was observed. Results from this study showed that TaqMan real-time PCR, is potentially an effective method for the rapid and reliable quantification of Agrobacterium sp. in samples containing GMO or non GMO samples. Copyright © 2015 Elsevier Ltd. All rights reserved.

  13. The "Performance of Rotavirus and Oral Polio Vaccines in Developing Countries" (PROVIDE) study: description of methods of an interventional study designed to explore complex biologic problems.

    Science.gov (United States)

    Kirkpatrick, Beth D; Colgate, E Ross; Mychaleckyj, Josyf C; Haque, Rashidul; Dickson, Dorothy M; Carmolli, Marya P; Nayak, Uma; Taniuchi, Mami; Naylor, Caitlin; Qadri, Firdausi; Ma, Jennie Z; Alam, Masud; Walsh, Mary Claire; Diehl, Sean A; Petri, William A

    2015-04-01

    Oral vaccines appear less effective in children in the developing world. Proposed biologic reasons include concurrent enteric infections, malnutrition, breast milk interference, and environmental enteropathy (EE). Rigorous study design and careful data management are essential to begin to understand this complex problem while assuring research subject safety. Herein, we describe the methodology and lessons learned in the PROVIDE study (Dhaka, Bangladesh). A randomized clinical trial platform evaluated the efficacy of delayed-dose oral rotavirus vaccine as well as the benefit of an injectable polio vaccine replacing one dose of oral polio vaccine. This rigorous infrastructure supported the additional examination of hypotheses of vaccine underperformance. Primary and secondary efficacy and immunogenicity measures for rotavirus and polio vaccines were measured, as well as the impact of EE and additional exploratory variables. Methods for the enrollment and 2-year follow-up of a 700 child birth cohort are described, including core laboratory, safety, regulatory, and data management practices. Intense efforts to standardize clinical, laboratory, and data management procedures in a developing world setting provide clinical trials rigor to all outcomes. Although this study infrastructure requires extensive time and effort, it allows optimized safety and confidence in the validity of data gathered in complex, developing country settings. © The American Society of Tropical Medicine and Hygiene.

  14. Proliferation Resistance and Safeguards by Design: The Safeguardability Assessment Tool Provided by the INPRO Collaborative Project ''INPRO'' (Proliferation Resistance and Safeguardability Assessment)

    International Nuclear Information System (INIS)

    Haas, E.; Chang, H.-L.; Phillips, J.R.; Listner, C.

    2015-01-01

    Since the INPRO Collaborative Project on Proliferation Resistance and Safeguardability Assessment Tools (PROSA) was launched in 2011, Member State experts have worked with the INPRO Section and the IAEA Department of Safeguards to develop a revised methodology for self-assessment of sustainability in the area of proliferation resistance of a nuclear energy system (NES). With the common understanding that there is ''no proliferation resistance without safeguards'' the revised approach emphasizes the evaluation of a new 'User Requirement' for ''safeguardability'', that combines metrics of effective and efficient implementation of IAEA Safeguards including ''Safeguards-by-Design'' principles. The assessment with safeguardability as the key issue has been devised as a linear process evaluating the NES against a ''Basic Principle'' in the area of proliferation resistance, answering fundamental questions related to safeguards: 1) Do a State's legal commitments, policies and practices provide credible assurance of the exclusively peaceful use of the NES, including a legal basis for verification activities by the IAEA? 2) Does design and operation of the NES facilitate the effective and efficient implementation of IAEA safeguards? To answer those questions, a questionnaire approach has been developed that clearly identifies gaps and weaknesses. Gaps include prospects for improvements and needs for research and development. In this context, the PROSA approach assesses the safeguardability of a NES using a layered ''Evaluation Questionnaire'' that defines Evaluation Parameters (EP), EP-related questions, Illustrative Tests and Screening Questions to present and structure the evidence of findings. An integral part of the assessment process is Safeguards-by-Design, the identification of potential diversion, misuse and concealment strategies (coarse diversion path

  15. Evaluation and mechanism for outcomes exploration of providing public health care in contract service in rural China: a multiple-case study with complex adaptive systems design.

    Science.gov (United States)

    Zhou, Huixuan; Zhang, Shengfa; Zhang, Weijun; Wang, Fugang; Zhong, You; Gu, Linni; Qu, Zhiyong; Tian, Donghua

    2015-02-27

    The Chinese government has increased the funding for public health in 2009 and experimentally applied a contract service policy (could be seen as a counterpart to family medicine) in 15 counties to promote public health services in the rural areas in 2013. The contract service aimed to convert village doctors, who had privately practiced for decades, into general practitioners under the government management, and better control the rampant chronic diseases. This study made a rare attempt to assess the effectiveness of public health services delivered under the contract service policy, explore the influencing mechanism and draw the implications for the policy extension in the future. Three pilot counties and a non-pilot one with heterogeneity in economic and health development from east to west of China were selected by a purposive sampling method. The case study methods by document collection, non-participant observation and interviews (including key informant interview and focus group interview) with 84 health providers and 20 demanders in multiple level were applied in this study. A thematic approach was used to compare diverse outcomes and analyze mechanism in the complex adaptive systems framework. Without sufficient incentives, the public health services were not conducted effectively, regardless of the implementation of the contract policy. To appropriately increase the funding for public health by local finance and properly allocate subsidy to village doctors was one of the most effective approaches to stimulate health providers and demanders' positivity and promote the policy implementation. County health bureaus acted as the most crucial agents among the complex public health systems. Their mental models influenced by the compound and various environments around them led to the diverse outcomes. If they could provide extra incentives and make the contexts of the systems ripe enough for change, the health providers and demanders would be receptive to the

  16. Analysis of the design and economics of molten carbonate fuel cell tri-generation systems providing heat and power for commercial buildings and H2 for FC vehicles

    Science.gov (United States)

    Li, Xuping; Ogden, Joan; Yang, Christopher

    2013-11-01

    This study models the operation of molten carbonate fuel cell (MCFC) tri-generation systems for “big box” store businesses that combine grocery and retail business, and sometimes gasoline retail. Efficiency accounting methods and parameters for MCFC tri-generation systems have been developed. Interdisciplinary analysis and an engineering/economic model were applied for evaluating the technical, economic, and environmental performance of distributed MCFC tri-generation systems, and for exploring the optimal system design. Model results show that tri-generation is economically competitive with the conventional system, in which the stores purchase grid electricity and NG for heat, and sell gasoline fuel. The results are robust based on sensitivity analysis considering the uncertainty in energy prices and capital cost. Varying system sizes with base case engineering inputs, energy prices, and cost assumptions, it is found that there is a clear tradeoff between the portion of electricity demand covered and the capital cost increase of bigger system size. MCFC Tri-generation technology provides lower emission electricity, heat, and H2 fuel. With NG as feedstock the CO2 emission can be reduced by 10%-43.6%, depending on how the grid electricity is generated. With renewable methane as feedstock CO2 emission can be further reduced to near zero.

  17. Crystal structure of the N domain of human somatic angiotensin I-converting enzyme provides a structural basis for domain-specific inhibitor design.

    Science.gov (United States)

    Corradi, Hazel R; Schwager, Sylva L U; Nchinda, Aloysius T; Sturrock, Edward D; Acharya, K Ravi

    2006-03-31

    Human somatic angiotensin I-converting enzyme (sACE) is a key regulator of blood pressure and an important drug target for combating cardiovascular and renal disease. sACE comprises two homologous metallopeptidase domains, N and C, joined by an inter-domain linker. Both domains are capable of cleaving the two hemoregulatory peptides angiotensin I and bradykinin, but differ in their affinities for a range of other substrates and inhibitors. Previously we determined the structure of testis ACE (C domain); here we present the crystal structure of the N domain of sACE (both in the presence and absence of the antihypertensive drug lisinopril) in order to aid the understanding of how these two domains differ in specificity and function. In addition, the structure of most of the inter-domain linker allows us to propose relative domain positions for sACE that may contribute to the domain cooperativity. The structure now provides a platform for the design of "domain-specific" second-generation ACE inhibitors.

  18. Design

    DEFF Research Database (Denmark)

    Jensen, Ole B.; Pettiway, Keon

    2017-01-01

    In this chapter, Ole B. Jensen takes a situational approach to mobilities to examine how ordinary life activities are structured by technology and design. Using “staging mobilities” as a theoretical approach, Jensen considers mobilities as overlapping, actions, interactions and decisions by desig...... by providing ideas about future research for investigating mobilities in situ as a kind of “staging,” which he notes is influenced by the “material turn” in social sciences....... with a brief description of how movement is studied within social sciences after the “mobilities turn” versus the idea of physical movement in transport geography and engineering. He then explains how “mobilities design” was derived from connections between traffic and architecture. Jensen concludes...

  19. What's New is What's Old: Use of Bode's Integral Theorem (circa 1945) to Provide Insight for 21st Century Spacecraft Attitude Control System Design Tuning

    Science.gov (United States)

    Ruth, Mike; Lebsock, Ken; Dennehy, Neil

    2010-01-01

    This paper revisits the Bode integral theorem, first described in 1945 for feedback amplifier design, in the context of modern satellite Attitude Control System (ACS) design tasks. Use of Bode's Integral clarifies in an elegant way the connection between open-loop stability margins and closed-loop bandwidth. More importantly it shows that there is a very strong tradeoff between disturbance rejection below the satellite controller design bandwidth, and disturbance amplification in the 'penalty region' just above the design bandwidth. This information has been successfully used to re-tune the control designs for several NASA science-mission satellites. The Appendix of this paper contains a complete summary of the relevant integral conservation theorems for stable, unstable, and non-minimum- phase plants.

  20. Design

    DEFF Research Database (Denmark)

    Volf, Mette

    This publication is unique in its demystification and operationalization of the complex and elusive nature of the design process. The publication portrays the designer’s daily work and the creative process, which the designer is a part of. Apart from displaying the designer’s work methods...... and design parameters, the publication shows examples from renowned Danish design firms. Through these examples the reader gets an insight into the designer’s reality....

  1. MAX Provider Characteristics

    Data.gov (United States)

    U.S. Department of Health & Human Services — The MAX Provider Characteristics (PC) File Implementation Report describes the design, implementation, and results of the MAXPC prototype, which was based on three...

  2. A design procedure for an acoustic mirror providing dual reflection of longitudinal and shear waves in Solidly Mounted BAW Resonators (SMRs)

    NARCIS (Netherlands)

    Jose, Sumy; Jansman, Andreas; Hueting, Raymond Josephus Engelbart

    The quality factor of the traditional Solidly Mounted Resonator (SMR) is limited by substrate losses, as the traditionally employed acoustic mirror reflects longitudinal waves but not shear waves. Modern mirrors do reflect both waves, but design rules for such mirrors have not been published so far.

  3. Develop guidelines for the design of pillar systems for shallow and intermediate depth, tabular, hard rock mines and provide methodology for assessing hangingwall stability and support requirements for the panels between pillars

    CSIR Research Space (South Africa)

    Haile, AT

    1995-12-01

    Full Text Available The overall view of the research being conducted at Impala platinum was to improve pillar design techniques through a rock testing programme, underground instrumentation and back analysis. The laboratory rock testing programme has provided a useful...

  4. Using a quality improvement model to enhance providers' performance in maternal and newborn health care : a post-only intervention and comparison design

    NARCIS (Netherlands)

    Ayalew, Firew; Eyassu, Gizachew; Seyoum, Negash; van Roosmalen, Jos; Bazant, Eva; Kim, Young Mi; Tekleberhan, Alemnesh; Gibson, Hannah; Daniel, Ephrem; Stekelenburg, Jelle

    2017-01-01

    Background: The Standards Based Management and Recognition (SBM-R (R)) approach to quality improvement has been implemented in Ethiopia to strengthen routine maternal and newborn health (MNH) services. This evaluation assessed the effect of the intervention on MNH providers' performance of routine

  5. User-centered design of a web-based self-management site for individuals with type 2 diabetes - providing a sense of control and community.

    Science.gov (United States)

    Yu, Catherine H; Parsons, Janet A; Hall, Susan; Newton, David; Jovicic, Aleksandra; Lottridge, Danielle; Shah, Baiju R; Straus, Sharon E

    2014-07-23

    To design and test a web-based self-management tool for patients with type 2 diabetes for its usability and feasibility. An evidence-based, theory-driven website was created for patients with type 2 diabetes. Twenty-three patients with type 2 diabetes aged ≥ 25 years were recruited from 2 diabetes care centers in Toronto, Canada. We employed focus group methodology to assess acceptability, sustainability, strengths and weaknesses of the self-management website. Based on these results, revisions were made to the website. Three cycles of individual usability testing sessions using cognitive task analysis were conducted with patients with type 2 diabetes. Revisions to the website were made based on results from this testing. We identified five themes concerning participants' experiences of health care and related unmet needs: 1) Desire for information and for greater access to timely and personalized care to gain a sense of control of their disease; 2) Desire for community (sharing experiences with others) to fulfill practical and emotional needs; 3) Potential roles of an online self-management website in self-empowerment, behavior change, self-management and health care delivery; 4) Importance of a patient-centered perspective in presenting content (e.g. common assumptions, medical nomenclature, language, messaging, sociocultural context); 5) Barriers and facilitators to use of a self-management website (including perceived relevance of content, incorporation into usual routine, availability for goal-directed use, usability issues). Participants outlined a series of unmet health care needs, and stated that they wanted timely access to tailored knowledge about their condition, mechanisms to control and track their disease, and opportunities to share experiences with other patients. These findings have implications for patients with type 2 diabetes of diverse ages, socioeconomic backgrounds, and disease severity, as well as to the design of other computer

  6. Design

    DEFF Research Database (Denmark)

    Volf, Mette

    Design - proces & metode iBog®  er enestående i sit fokus på afmystificering og operationalisering af designprocessens flygtige og komplekse karakter. Udgivelsen går bag om designerens daglige arbejde og giver et indblik i den kreative skabelsesproces, som designeren er en del af. Udover et bredt...... indblik i designerens arbejdsmetoder og designparametre giver Design - proces & metode en række eksempler fra anerkendte designvirksomheder, der gør det muligt at komme helt tæt på designerens virkelighed....

  7. Proposal by simple design of the lower limb exoskeleton of continuous use, provided of own mobility and body load support. Case: application due to an illness

    Science.gov (United States)

    Rodriguez-Martinez, Rafael; Lopez-Amaya, Julio Alberto; Urriolagoitia-Sosa, Guillermo; Romero-Ángeles, Beatriz; Urriolagoitia-Calderón, Guillermo Manuel

    2017-01-01

    In recent times it has established a debate between experts and academics about the social and economic impact of advances in robotics. The robotic exoskeletons mounted as suits on affected parts of the human body, represent one of the most significant examples of which is oriented towards robotics. With recent technological advances have increased the fields of application of these devices widely with respect to the first applications were teleoperation and increase in strength of a human being for various tasks. The aim of this work is to contribute as much as possible, to start a discussion about the vision of offering future developments in socio-economic terms and its impact resulting from the use of robotic exoskeletons, especially with regard to its application in medical rehabilitation of lower member and especially its use permanent, replacing cumbersome devices such as crutches, walkers, canes. All this, focused on the health sector, which is most affected by different diseases cannot have access to these devices. In this paper, only it proposes a design that could be inexpensive and used for various ailments.

  8. Design

    Science.gov (United States)

    Buchanan, Richard; Cross, Nigel; Durling, David; Nelson, Harold; Owen, Charles; Valtonen, Anna; Boling, Elizabeth; Gibbons, Andrew; Visscher-Voerman, Irene

    2013-01-01

    Scholars representing the field of design were asked to identify what they considered to be the most exciting and imaginative work currently being done in their field, as well as how that work might change our understanding. The scholars included Richard Buchanan, Nigel Cross, David Durling, Harold Nelson, Charles Owen, and Anna Valtonen. Scholars…

  9. Kinetic and Modeling Investigation to Provide Design Guidelines for the NREL Dilute-Acid Process Aimed at Total Hydrolysis/Fractionation of Lignocellulosic Biomass: July 1998

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Y. Y.; Iyer, P.; Xiang, Q.; Hayes, J.

    2004-08-01

    Following up on previous work, subcontractor investigated three aspects of using NREL ''pretreatment'' technology for total hydrolysis (cellulose as well as hemicellulose) of biomass. Whereas historic hydrolysis of biomass used either dilute acid or concentrated acid technology for hydrolysis of both hemicellulose and cellulose, NREL has been pursuing very dilute acid hydrolysis of hemicellulose followed by enzymatic hydrolysis of cellulose. NREL's countercurrent shrinking-bed reactor design for hemicellulose hydrolysis (pretreatment) has, however, shown promise for total hydrolysis. For the first task, subcontractor developed a mathematical model of the countercurrent shrinking bed reactor operation and, using yellow poplar sawdust as a feedstock, analyzed the effect of: initial solid feeding rate, temperature, acid concentration, acid flow rate, Peclet number (a measure of backmixing in liquid flow), and bed shrinking. For the second task, subcontractor used laboratory trials, with yellow poplar sawdust and 0.07 wt% sulfuric acid at various temperatures, to verify the hydrolysis of cellulose to glucose (desired) and decomposition of glucose (undesired) and determine appropriate parameters for use in kinetic models. Unlike cellulose and hemicellulose, lignins, the third major component of biomass, are not carbohydrates that can be broken down into component sugars. They are, however, aromatic complex amorphous phenolic polymers that can likely be converted into low-molecular weight compounds suitable for production of fuels and chemicals. Oxidative degradation is one pathway for such conversion and hydrogen peroxide would be an attractive reagent for this, as it would leave no residuals. For the third task, subcontractor reacted lignin with hydrogen peroxide under various conditions and analyzed the resulting product mix.

  10. Structures of Trypanosoma brucei methionyl-tRNA synthetase with urea-based inhibitors provide guidance for drug design against sleeping sickness.

    Directory of Open Access Journals (Sweden)

    Cho Yeow Koh

    2014-04-01

    Full Text Available Methionyl-tRNA synthetase of Trypanosoma brucei (TbMetRS is an important target in the development of new antitrypanosomal drugs. The enzyme is essential, highly flexible and displaying a large degree of changes in protein domains and binding pockets in the presence of substrate, product and inhibitors. Targeting this protein will benefit from a profound understanding of how its structure adapts to ligand binding. A series of urea-based inhibitors (UBIs has been developed with IC50 values as low as 19 nM against the enzyme. The UBIs were shown to be orally available and permeable through the blood-brain barrier, and are therefore candidates for development of drugs for the treatment of late stage human African trypanosomiasis. Here, we expand the structural diversity of inhibitors from the previously reported collection and tested for their inhibitory effect on TbMetRS and on the growth of T. brucei cells. The binding modes and binding pockets of 14 UBIs are revealed by determination of their crystal structures in complex with TbMetRS at resolutions between 2.2 Å to 2.9 Å. The structures show binding of the UBIs through conformational selection, including occupancy of the enlarged methionine pocket and the auxiliary pocket. General principles underlying the affinity of UBIs for TbMetRS are derived from these structures, in particular the optimum way to fill the two binding pockets. The conserved auxiliary pocket might play a role in binding tRNA. In addition, a crystal structure of a ternary TbMetRS•inhibitor•AMPPCP complex indicates that the UBIs are not competing with ATP for binding, instead are interacting with ATP through hydrogen bond. This suggests a possibility that a general 'ATP-engaging' binding mode can be utilized for the design and development of inhibitors targeting tRNA synthetases of other disease-causing pathogen.

  11. The Implementation of an Innovative High School Mentoring Program Designed to Enhance Diversity and Provide a Pathway for Future Careers in Healthcare Related Fields.

    Science.gov (United States)

    Patel, Salma I; Rodríguez, Patricia; Gonzales, Rayna J

    2015-09-01

    Although the population of diverse applicants applying to medical school has increased over recent years (AAMC Diversity in Medical Education: Facts and Figures 2012); efforts persist to ensure the continuance of this increasing trend. Mentoring students at an early age may be an effective method by which to accomplish diversity within the applicant pool. Having a diverse physician population is more likely able to adequately address the healthcare needs of our diverse population. The purpose of this study is to initiate a pipeline program, called the Medical Student Mentorship Program (MSMP), designed to specifically target high school students from lower economic status, ethnic, or racial underrepresented populations. High school students were paired with medical students, who served as primary mentors to facilitate exposure to processes involved in preparing and training for careers in medicine and other healthcare-related fields as well as research. Mentors were solicited from first and second year medical students at the University of Arizona College of Medicine-Phoenix (UACOM-P). Two separate cohorts of mentees were selected based on an application process from a local high school for the school years 2010-2011 and 2011-2012. Anonymous mentee and mentor surveys were used to evaluate the success of the MSMP. A total of 16 pairs of mentees and mentors in the 2010-2011 (Group 1) and 2011-2012 (Group 2) studies participated in MSMP. High school students reported that they were more likely to apply to medical school after participating in the program. Mentees also reported that they received a significant amount of support, helpful information, and guidance from their medical student mentors. Overall, feedback from mentees and mentors was positive and they reported that their participation was rewarding. Mentees were contacted 2 to 3 years post MSMP participation as sophomores or juniors in college, and all reported that they were on a pre-healthcare career track

  12. Comparing in-service multi-input loads applied on non-stiff components submitted to vibration fatigue to provide specifications for robust design

    Directory of Open Access Journals (Sweden)

    Le Corre Gwenaëlle

    2018-01-01

    Full Text Available This study focuses on applications from the automotive industry, on mechanical components submitted to vibration loads. On one hand, the characterization of loading for dimensioning new structures in fatigue is enriched and updated by customer data analysis. On the other hand, the loads characterization also aims to provide robust specifications for simulation or physical tests. These specifications are needed early in the project, in order to perform the first durability verification activities. At this time, detailed information about the geometry and the material is rare. Vibration specifications need to be adapted to a calculation time or physical test durations in accordance with the pace imposed by the projects timeframe. In the trucks industry, the dynamic behaviour can vary significantly from one configuration of truck to another, as the trucks architecture impacts the load environment of the components. The vibration specifications need to be robust by taking care of the diversity of vehicles and markets considered in the scope of the projects. For non-stiff structures, the lifetime depends, among other things, on the frequency content of the loads, as well as the interactions between the components of the multi-input loads. In this context, this paper proposes an approach to compare sets of variable amplitude multi-input loads applied on non-stiff structures. The comparison is done in terms of damage, with limited information on the structure where the loads sets are applied on. The methodology is presented, as well as an application. Activities planned to validate the methodology are also exposed.

  13. Electronic medication complete communication strategy for opioid prescriptions in the emergency department: Rationale and design for a three-arm provider randomized trial.

    Science.gov (United States)

    McCarthy, Danielle M; Courtney, D Mark; Lank, Patrick M; Cameron, Kenzie A; Russell, Andrea M; Curtis, Laura M; Kim, Kwang-Youn A; Walton, Surrey M; Montague, Enid; Lyden, Abbie L; Gravenor, Stephanie J; Wolf, Michael S

    2017-08-01

    Thousands of people die annually from prescription opioid overdoses; however there are few strategies to ensure patients receive medication risk information at the time of prescribing. To compare the effectiveness of the Emergency Department (ED) Electronic Medication Complete Communication (EMC 2 ) Opioid Strategy (with and without text messaging) to promote safe medication use and improved patient knowledge as compared to usual care. The ED EMC 2 Opioid Strategy consists of 5 automated components to promote safe medication use: 1) physician reminder to counsel, 2) inbox message sent on to the patient's primary care physician, 3) pharmacist message on the prescription to counsel, 4) MedSheet supporting prescription information, and 5) patient-centered Take-Wait-Stop wording of prescription instructions. This strategy will be assessed both with and without the addition of text messages via a three-arm randomized trial. The study will take place at an urban academic ED (annual volume>85,000) in Chicago, IL. Patients being discharged with a new prescription for hydrocodone-acetaminophen will be enrolled and randomized (based on their prescribing physician). The primary outcome of the study is medication safe use as measured by a demonstrated dosing task. Additionally actual safe use, patient knowledge and provider counseling will be measured. Implementation fidelity as well as costs will be reported. The ED EMC 2 Opioid Strategy embeds a risk communication strategy into the electronic health record and promotes medication counseling with minimal workflow disruption. This trial will evaluate the strategy's effectiveness and implementation fidelity as compared to usual care. This trial is registered on clinicaltrials.gov with identifier NCT02431793. Copyright © 2017 Elsevier Inc. All rights reserved.

  14. Competitive strategy to provide technology and basic designs for the construction of new refineries premium of the PETROBRAS; Estrategia competitiva para prover tecnologias e projetos basicos para a construcao de novas refinarias premium da PETROBRAS

    Energy Technology Data Exchange (ETDEWEB)

    Claudia, Baptista M.L.A.; Adalberto, Barbalho S [Petroleo Brasileiro S.A. (PETROBRAS), Rio de Janeiro, RJ (Brazil)

    2012-07-01

    Nowadays, there are major incentives for the construction of new refineries in Brazil: the increase of the local market and the discovery of huge oil reserves in the southeastern Atlantic coast of Brazil. In this scenario, PETROBRAS decided to construct two new refineries, Premium I and II, with a total refining capacity of 900.000 BPSD. The refineries will be designed to process a mix of Brazilian national crudes. The main objects of this ambitious project are to produce high quality diesel and jet fuel from an elevated nitrogen content feedstock, minimizing capital expenditure and schedule. Both refineries will have the same flow scheme with a target to maximize Middle distillate production for the European and local markets. In order to assure that the refinery scheme and the technologies selected will provide the best Net Present Value (NPV), it was decided to perform a Design Competition process to select the company to provide the basic design for all Premium refineries. As the concepts behind a Design Competition were new for PETROBRAS a rigorous process was developed and followed, which entailed contracting three benchmark companies with outstanding knowledge and experience in hydroprocessing to provide independent conceptual studies for a 300.000 BPSD refinery called Premium II. The vision was to utilize the same refinery scheme in the construction of the Premium I refinery which will have two identical trains processing 300.000 BPD. The awarded company was selected based on technical and economic evaluations, supported by state of the art hydroprocessing technologies, block flow diagram optimization and heat integration. This strategy allowed PETROBRAS to acquire the best refinery scheme and process designs for the PREMIUM refineries. The present paper discusses the design competition process, the refinery scheme adopted and the results achieved. (author)

  15. Impact on postpartum hemorrhage of prophylactic administration of oxytocin 10 IU via UnijectTM by peripheral health care providers at home births: design of a community-based cluster-randomized trial

    Directory of Open Access Journals (Sweden)

    Stanton Cynthia K

    2012-06-01

    Full Text Available Abstract Background Hemorrhage is the leading direct cause of maternal death globally. While oxytocin is the drug of choice for postpartum hemorrhage prevention, its use has generally been limited to health facilities. This trial assesses the effectiveness, safety, and feasibility of expanding the use of prophylactic intramuscular oxytocin to peripheral health care providers at home births in four predominantly rural districts in central Ghana. Methods This study is designed as a community-based cluster-randomized trial in which Community Health Officers are randomized to provide (or not provide an injection of oxytocin 10 IU via the UnijectTM injection system within one minute of delivery of the baby to women who request their presence at home at the onset of labor. The primary aim is to determine if administration of prophylactic oxytocin via Uniject™ by this cadre will reduce the risk of postpartum hemorrhage by 50 % relative to deliveries which do not receive the prophylactic intervention. Postpartum hemorrhage is examined under three sequential definitions: 1 blood loss ≥500 ml (BL; 2 treatment for bleeding (TX and/or BL; 3 hospital referral for bleeding and/or TX and/or BL. Secondary outcomes address safety and feasibility of the intervention and include adverse maternal and fetal outcomes and logistical concerns regarding assistance at home births and the storage and handling of oxytocin, respectively. Discussion Results from this trial will build evidence for the effectiveness of expanding the delivery of this established prophylactic intervention to peripheral settings. Complementary data on safety and logistical issues related to this intervention will assist policymakers in low-income countries in selecting both the best uterotonic and service delivery strategy for postpartum hemorrhage prevention. Results of this trial are expected in mid-2013. The trial is registered at ClinicalTrials.gov: NCT01108289.

  16. Impact on postpartum hemorrhage of prophylactic administration of oxytocin 10 IU via Uniject™ by peripheral health care providers at home births: design of a community-based cluster-randomized trial.

    Science.gov (United States)

    Stanton, Cynthia K; Newton, Samuel; Mullany, Luke C; Cofie, Patience; Agyemang, Charlotte Tawiah; Adiibokah, Edward; Darcy, Niamh; Khan, Sadaf; Levisay, Alice; Gyapong, John; Armbruster, Deborah; Owusu-Agyei, Seth

    2012-06-07

    Hemorrhage is the leading direct cause of maternal death globally. While oxytocin is the drug of choice for postpartum hemorrhage prevention, its use has generally been limited to health facilities. This trial assesses the effectiveness, safety, and feasibility of expanding the use of prophylactic intramuscular oxytocin to peripheral health care providers at home births in four predominantly rural districts in central Ghana. This study is designed as a community-based cluster-randomized trial in which Community Health Officers are randomized to provide (or not provide) an injection of oxytocin 10 IU via the Uniject™ injection system within one minute of delivery of the baby to women who request their presence at home at the onset of labor. The primary aim is to determine if administration of prophylactic oxytocin via Uniject™ by this cadre will reduce the risk of postpartum hemorrhage by 50 % relative to deliveries which do not receive the prophylactic intervention. Postpartum hemorrhage is examined under three sequential definitions: 1) blood loss ≥500 ml (BL); 2) treatment for bleeding (TX) and/or BL; 3) hospital referral for bleeding and/or TX and/or BL. Secondary outcomes address safety and feasibility of the intervention and include adverse maternal and fetal outcomes and logistical concerns regarding assistance at home births and the storage and handling of oxytocin, respectively. Results from this trial will build evidence for the effectiveness of expanding the delivery of this established prophylactic intervention to peripheral settings. Complementary data on safety and logistical issues related to this intervention will assist policymakers in low-income countries in selecting both the best uterotonic and service delivery strategy for postpartum hemorrhage prevention. Results of this trial are expected in mid-2013. The trial is registered at ClinicalTrials.gov: NCT01108289.

  17. Providing solutions to engineering problems

    International Nuclear Information System (INIS)

    Connop, R.P.P.

    1991-01-01

    BNFL has acquired unique experience over a period of 40 years in specifying, designing and constructing spent fuel reprocessing and associated waste management plant. This experience is currently used to support a pound 5.5 billion capital investment programme. This paper reviews a number of engineering problems and their solutions to highlight BNFL experience in providing comprehensive specification, design and engineering and project management services. (author)

  18. Therapy Provider Phase Information

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Therapy Provider Phase Information dataset is a tool for providers to search by their National Provider Identifier (NPI) number to determine their phase for...

  19. A multi-site community randomized trial of community health workers to provide counseling and support for patients newly entering HIV care in rural Ethiopia: study design and baseline implementation.

    Science.gov (United States)

    Lifson, Alan R; Workneh, Sale; Hailemichael, Abera; MacLehose, Richard F; Horvath, Keith J; Hilk, Rose; Fabian, Lindsey; Sites, Anne; Shenie, Tibebe

    2018-06-01

    Although HIV therapy is delivered to millions globally, treatment default (especially soon after entering care) remains a challenge. Community health workers (CHWs) can provide many services for people with HIV, including in rural and resource-limited settings. We designed and implemented a 32 site community randomized trial throughout southern Ethiopia to assess an intervention using CHWs to improve retention in HIV care. Sixteen district hospital and 16 local health center HIV clinics were randomized 1:1 to be intervention or control sites. From each site, we enrolled adults newly entering HIV care. Participants at intervention sites were assigned a CHW who provided: HIV and health education; counseling and social support; and facilitated communication with HIV clinics. All participants are followed through three years with annual health surveys, plus HIV clinic record abstraction including clinic visit dates. CHWs record operational data about their client contacts. 1799 HIV patients meeting inclusion criteria were enrolled and randomized: 59% were female, median age = 32 years, median CD4 + count = 263 cells/mm 3 , and 41% were WHO Stage III or IV. A major enrollment challenge was fewer new HIV patients initiating care at participating sites due to shortage of HIV test kits. At intervention sites, 71 CHWs were hired, trained and assigned to clients. In meeting with clients, CHWs needed to accommodate to various challenges, including HIV stigma, distance, and clients lacking cell phones. This randomized community HIV trial using CHWs in a resource-limited setting was successfully launched, but required flexibility to adapt to unforeseen challenges.

  20. Use of behavioral economics and social psychology to improve treatment of acute respiratory infections (BEARI): rationale and design of a cluster randomized controlled trial [1RC4AG039115-01] - study protocol and baseline practice and provider characteristics

    Science.gov (United States)

    2013-01-01

    Background Inappropriate antibiotic prescribing for nonbacterial infections leads to increases in the costs of care, antibiotic resistance among bacteria, and adverse drug events. Acute respiratory infections (ARIs) are the most common reason for inappropriate antibiotic use. Most prior efforts to decrease inappropriate antibiotic prescribing for ARIs (e.g., educational or informational interventions) have relied on the implicit assumption that clinicians inappropriately prescribe antibiotics because they are unaware of guideline recommendations for ARIs. If lack of guideline awareness is not the reason for inappropriate prescribing, educational interventions may have limited impact on prescribing rates. Instead, interventions that apply social psychological and behavioral economic principles may be more effective in deterring inappropriate antibiotic prescribing for ARIs by well-informed clinicians. Methods/design The Application of Behavioral Economics to Improve the Treatment of Acute Respiratory Infections (BEARI) Trial is a multisite, cluster-randomized controlled trial with practice as the unit of randomization. The primary aim is to test the ability of three interventions based on behavioral economic principles to reduce the rate of inappropriate antibiotic prescribing for ARIs. We randomized practices in a 2 × 2 × 2 factorial design to receive up to three interventions for non-antibiotic-appropriate diagnoses: 1) Accountable Justifications: When prescribing an antibiotic for an ARI, clinicians are prompted to record an explicit justification that appears in the patient electronic health record; 2) Suggested Alternatives: Through computerized clinical decision support, clinicians prescribing an antibiotic for an ARI receive a list of non-antibiotic treatment choices (including prescription options) prior to completing the antibiotic prescription; and 3) Peer Comparison: Each provider’s rate of inappropriate antibiotic prescribing relative to top

  1. Medical service provider networks.

    Science.gov (United States)

    Mougeot, Michel; Naegelen, Florence

    2018-05-17

    In many countries, health insurers or health plans choose to contract either with any willing providers or with preferred providers. We compare these mechanisms when two medical services are imperfect substitutes in demand and are supplied by two different firms. In both cases, the reimbursement is higher when patients select the in-network provider(s). We show that these mechanisms yield lower prices, lower providers' and insurer's profits, and lower expense than in the uniform-reimbursement case. Whatever the degree of product differentiation, a not-for-profit insurer should prefer selective contracting and select a reimbursement such that the out-of-pocket expense is null. Although all providers join the network under any-willing-provider contracting in the absence of third-party payment, an asymmetric equilibrium may exist when this billing arrangement is implemented. Copyright © 2018 John Wiley & Sons, Ltd.

  2. Visual Storyboarding Provides a Conceptual Bridge from Research to Development: Students Can Imagine the Results of Their Decision Making, and Their Prioritization of the Many Facets of the Design Problem Will Facilitate the Development of a Strong Final Solution

    Science.gov (United States)

    Reeder, Kevin

    2005-01-01

    In order to facilitate the selection/prioritization process and bridge the gap of design research to design conceptualization, students need to visualize the big picture that describes how the research categories such as "user," "marketing," "functional/mechanical research" are related. This is achieved through the use of a visual storyboard. The…

  3. Develop guidelines for the design of pillar systems for shallow and intermediate depth, tabular, hard rock mines and provide a methodology for assessing hangingwall stability and support requirements for the panels between pillars

    CSIR Research Space (South Africa)

    York, G

    1998-12-01

    Full Text Available The design of hard rock pillars, in shallow to intermediate depth hard rock mines, has been redefined as the determination of the pillar system load bearing capacity. This entails the ability to design each of the components of the pillar system...

  4. Providing free autopoweroff plugs

    DEFF Research Database (Denmark)

    Jensen, Carsten Lynge; Hansen, Lars Gårn; Fjordbak, Troels

    2012-01-01

    Experimental evidence of the effect of providing households with cheap energy saving technology is sparse. We present results from a field experiment in which autopoweroff plugs were provided free of charge to randomly selected households. We use propensity score matching to find treatment effects...

  5. Structural and In Vivo Studies on Trehalose-6-Phosphate Synthase from Pathogenic Fungi Provide Insights into Its Catalytic Mechanism, Biological Necessity, and Potential for Novel Antifungal Drug Design

    Energy Technology Data Exchange (ETDEWEB)

    Miao, Yi; Tenor, Jennifer L.; Toffaletti, Dena L.; Maskarinec, Stacey A.; Liu, Jiuyu; Lee, Richard E.; Perfect, John R.; Brennan, Richard G.; Hendrickson, Wayne A.

    2017-07-25

    mammals, and thus, the two enzymes that carry out trehalose biosynthesis, namely, trehalose-6-phosphate synthase (Tps1) and trehalose-6-phosphate phosphatase (Tps2), are prominent targets for antifungal intervention. Here, we report the first eukaryotic Tps1 structures from the pathogenic fungiCandida albicansandAspergillus fumigatusin complex with substrates, substrate analogues, and inhibitors. These structures reveal key protein-substrate interactions, providing atomic-level scaffolds for structure-guided drug design of novel antifungals that target Tps1.

  6. Crystal Structures of Yeast-Produced Enterovirus 71 and Enterovirus 71/Coxsackievirus A16 Chimeric Virus-Like Particles Provide the Structural Basis for Novel Vaccine Design against Hand-Foot-and-Mouth Disease.

    Science.gov (United States)

    Lyu, Ke; He, Ya-Ling; Li, Hao-Yang; Chen, Rong

    2015-06-01

    Human enterovirus 71 (EV71) and coxsackievirus A16 (CVA16) are the two major causative agents for hand-foot-and-mouth disease (HFMD). Previously, we demonstrated that a virus-like particle (VLP) for EV71 produced from Saccharomyces cerevisiae is a potential vaccine candidate against EV71 infection, and an EV71/CVA16 chimeric VLP can elicit protective immune responses against both virus infections. Here, we presented the crystal structures of both VLPs, showing that both the linear and conformational neutralization epitopes identified in EV71 are mostly preserved on both VLPs. The replacement of only 4 residues in the VP1 GH loop converted strongly negatively charged surface patches formed by portions of the SP70 epitope in EV71 VLP into a relatively neutral surface in the chimeric VLP, which likely accounted for the additional neutralization capability of the chimeric VLP against CVA16 infection. Such local variations in the amino acid sequences and the surface charge potential are also present in different types of polioviruses. In comparison to EV71 VLP, the chimeric VLP exhibits structural changes at the local site of amino acid replacement and the surface loops of all capsid proteins. This is consistent with the observation that the VP1 GH loop located near the pseudo-3-fold junction is involved in extensive interactions with other capsid regions. Furthermore, portions of VP0 and VP1 in EV71 VLP are at least transiently exposed, revealing the structural flexibility of the VLP. Together, our structural analysis provided insights into the structural basis of enterovirus neutralization and novel vaccine design against HFMD and other enterovirus-associated diseases. Our previous studies demonstrated that the enterovirus 71 (EV71) virus-like particle (VLP) produced from yeast is a vaccine candidate against EV71 infection and that a chimeric EV71/coxsackievirus A16 (CVA16) VLP with the replacement of 4 amino acids in the VP1 GH loop can confer protection against both

  7. VLSI design

    CERN Document Server

    Chandrasetty, Vikram Arkalgud

    2011-01-01

    This book provides insight into the practical design of VLSI circuits. It is aimed at novice VLSI designers and other enthusiasts who would like to understand VLSI design flows. Coverage includes key concepts in CMOS digital design, design of DSP and communication blocks on FPGAs, ASIC front end and physical design, and analog and mixed signal design. The approach is designed to focus on practical implementation of key elements of the VLSI design process, in order to make the topic accessible to novices. The design concepts are demonstrated using software from Mathworks, Xilinx, Mentor Graphic

  8. Credential Service Provider (CSP)

    Data.gov (United States)

    Department of Veterans Affairs — Provides a VA operated Level 1 and Level 2 credential for individuals who require access to VA applications, yet cannot obtain a credential from another VA accepted...

  9. Provider software buyer's guide.

    Science.gov (United States)

    1994-03-01

    To help long term care providers find new ways to improve quality of care and efficiency, Provider magazine presents the fourth annual listing of software firms marketing computer programs for all areas of nursing facility operations. On the following five pages, more than 80 software firms display their wares, with programs such as minimum data set and care planning, dietary, accounting and financials, case mix, and medication administration records. The guide also charts compatible hardware, integration ability, telephone numbers, company contacts, and easy-to-use reader service numbers.

  10. What HERA may provide?

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Hannes [DESY, Hamburg (Germany); De Roeck, Albert [CERN, Genf (Switzerland); Bartles, Jochen [Univ. Hamburg (DE). Institut fuer Theoretische Physik II] (and others)

    2008-09-15

    More than 100 people participated in a discussion session at the DIS08 workshop on the topic What HERA may provide. A summary of the discussion with a structured outlook and list of desirable measurements and theory calculations is given. (orig.)

  11. What HERA may provide?

    International Nuclear Information System (INIS)

    Jung, Hannes; De Roeck, Albert; Bartles, Jochen

    2008-09-01

    More than 100 people participated in a discussion session at the DIS08 workshop on the topic What HERA may provide. A summary of the discussion with a structured outlook and list of desirable measurements and theory calculations is given. (orig.)

  12. Provider of Services File

    Data.gov (United States)

    U.S. Department of Health & Human Services — The POS file consists of two data files, one for CLIA labs and one for 18 other provider types. The file names are CLIA and OTHER. If downloading the file, note it...

  13. Building Service Provider Capabilities

    DEFF Research Database (Denmark)

    Brandl, Kristin; Jaura, Manya; Ørberg Jensen, Peter D.

    2015-01-01

    In this paper we study whether and how the interaction between clients and the service providers contributes to the development of capabilities in service provider firms. In situations where such a contribution occurs, we analyze how different types of activities in the production process...... process. We find that clients influence the development of human capital capabilities and management capabilities in reciprocally produced services. While in sequential produced services clients influence the development of organizational capital capabilities and management capital capabilities....... of the services, such as sequential or reciprocal task activities, influence the development of different types of capabilities. We study five cases of offshore-outsourced knowledge-intensive business services that are distinguished according to their reciprocal or sequential task activities in their production...

  14. Providing x-rays

    International Nuclear Information System (INIS)

    Mallozzi, P.J.; Epstein, H.M.

    1985-01-01

    This invention provides an apparatus for providing x-rays to an object that may be in an ordinary environment such as air at approximately atmospheric pressure. The apparatus comprises: means (typically a laser beam) for directing energy onto a target to produce x-rays of a selected spectrum and intensity at the target; a fluid-tight enclosure around the target; means for maintaining the pressure in the first enclosure substantially below atmospheric pressure; a fluid-tight second enclosure adjoining the first enclosure, the common wall portion having an opening large enough to permit x-rays to pass through but small enough to allow the pressure reducing means to evacuate gas from the first enclosure at least as fast as it enters through the opening; the second enclosure filled with a gas that is highly transparent to x-rays; the wall of the second enclosure to which the x-rays travel having a portion that is highly transparent to x-rays (usually a beryllium or plastic foil), so that the object to which the x-rays are to be provided may be located outside the second enclosure and adjacent thereto and thus receive the x-rays substantially unimpeded by air or other intervening matter. The apparatus is particularly suited to obtaining EXAFS (extended x-ray fine structure spectroscopy) data on a material

  15. Why healthcare providers merge.

    Science.gov (United States)

    Postma, Jeroen; Roos, Anne-Fleur

    2016-04-01

    In many OECD countries, healthcare sectors have become increasingly concentrated as a result of mergers. However, detailed empirical insight into why healthcare providers merge is lacking. Also, we know little about the influence of national healthcare policies on mergers. We fill this gap in the literature by conducting a survey study on mergers among 848 Dutch healthcare executives, of which 35% responded (resulting in a study sample of 239 executives). A total of 65% of the respondents was involved in at least one merger between 2005 and 2012. During this period, Dutch healthcare providers faced a number of policy changes, including increasing competition, more pressure from purchasers, growing financial risks, de-institutionalisation of long-term care and decentralisation of healthcare services to municipalities. Our empirical study shows that healthcare providers predominantly merge to improve the provision of healthcare services and to strengthen their market position. Also efficiency and financial reasons are important drivers of merger activity in healthcare. We find that motives for merger are related to changes in health policies, in particular to the increasing pressure from competitors, insurers and municipalities.

  16. PROVIDING WOMEN, KEPT MEN

    Science.gov (United States)

    Mojola, Sanyu A

    2014-01-01

    This paper draws on ethnographic and interview based fieldwork to explore accounts of intimate relationships between widowed women and poor young men that emerged in the wake of economic crisis and a devastating HIV epidemic among the Luo ethnic group in Western Kenya. I show how the cooptation of widow inheritance practices in the wake of an overwhelming number of widows as well as economic crisis resulted in widows becoming providing women and poor young men becoming kept men. I illustrate how widows in this setting, by performing a set of practices central to what it meant to be a man in this society – pursuing and providing for their partners - were effectively doing masculinity. I will also show how young men, rather than being feminized by being kept, deployed other sets of practices to prove their masculinity and live in a manner congruent with cultural ideals. I argue that ultimately, women’s practice of masculinity in large part seemed to serve patriarchal ends. It not only facilitated the fulfillment of patriarchal expectations of femininity – to being inherited – but also served, in the end, to provide a material base for young men’s deployment of legitimizing and culturally valued sets of masculine practice. PMID:25489121

  17. Geometric information provider platform

    Directory of Open Access Journals (Sweden)

    Meisam Yousefzadeh

    2015-07-01

    Full Text Available Renovation of existing buildings is known as an essential stage in reduction of the energy loss. Considerable part of renovation process depends on geometric reconstruction of building based on semantic parameters. Following many research projects which were focused on parameterizing the energy usage, various energy modelling methods were developed during the last decade. On the other hand, by developing accurate measuring tools such as laser scanners, the interests of having accurate 3D building models are rapidly growing. But the automation of 3D building generation from laser point cloud or detection of specific objects in that is still a challenge.  The goal is designing a platform through which required geometric information can be efficiently produced to support energy simulation software. Developing a reliable procedure which extracts required information from measured data and delivers them to a standard energy modelling system is the main purpose of the project.

  18. Providing rehabilitation online

    DEFF Research Database (Denmark)

    Bødker, Malene; Juul, Annegrete

    2015-01-01

    Purpose – Telecare promises to deliver healthcare services more efficiently while, at the same time, improving the quality of care. The purpose of this paper is to challenge these promises by analysing the implications of introducing telecare in the rehabilitation of patients suffering from chronic...... obstructive pulmonary disease. Design/methodology/approach – Empirically, the paper is based on interviews with and observations of rehabilitation therapists and patients taking part in a Danish telerehabilitation programme. Theoretically, the paper draws on Science and Technology Studies. Findings...... one ends. Practical implications – Evaluations of telecare technologies should pay more attention to workand responsibility-related effects of introducing telecare in order better to account for predicted and unpredicted as well as desirable and undesirable socio-technical changes. Originality/value...

  19. Prehospital Providers' Perceptions on Providing Patient and Family Centered Care.

    Science.gov (United States)

    Ayub, Emily M; Sampayo, Esther M; Shah, Manish I; Doughty, Cara B

    2017-01-01

    A gap exists in understanding a provider's approach to delivering care that is mutually beneficial to patients, families, and other providers in the prehospital setting. The purpose of this study was to identify attitudes, beliefs, and perceived barriers to providing patient and family centered care (PFCC) in the prehospital setting and to describe potential solutions for improving PFCC during critical pediatric events. We conducted a qualitative, cross-sectional study of a purposive sample of Emergency Medical Technicians (EMTs) and paramedics from an urban, municipal, fire-based EMS system, who participated in the Pediatric Simulation Training for Emergency Prehospital Providers (PediSTEPPS) course. Two coders reviewed transcriptions of audio recordings from participants' first simulation scenario debriefings and performed constant comparison analysis to identify unifying themes. Themes were verified through member checking with two focus groups of prehospital providers. A total of 122 EMTs and paramedics participated in 16 audiotaped debriefing sessions and two focus groups. Four overarching themes emerged regarding the experience of PFCC by prehospital providers: (1) Perceived barriers included the prehospital environment, limited manpower, multi-tasking medical care, and concern for interference with patient care; (2) Providing emotional support comprised of empathetically comforting caregivers, maintaining a calm demeanor, and empowering families to feel involved; (3) Effective communication strategies consisted of designating a family point person, narration of actions, preempting the next steps, speaking in lay terms, summarizing during downtime, and conveying a positive first impression; (4) Tactics to overcome PFCC barriers were maintaining a line of sight, removing and returning a caregiver to and from the scene, and providing situational awareness. Based on debriefings from simulated scenarios, some prehospital providers identified the provision of

  20. Providing Compassion through Flow

    Directory of Open Access Journals (Sweden)

    Lydia Royeen

    2015-07-01

    Full Text Available Meg Kral, MS, OTR/L, CLT, is the cover artist for the Summer 2015 issue of The Open Journal of Occupational Therapy. Her untitled piece of art is an oil painting and is a re-creation of a photograph taken while on vacation. Meg is currently supervisor of outpatient services at Rush University Medical Center. She is lymphedema certified and has a specific interest in breast cancer lymphedema. Art and occupational therapy serve similar purposes for Meg: both provide a sense of flow. She values the outcomes, whether it is a piece of art or improved functional status

  1. Energy providers: customer expectations

    International Nuclear Information System (INIS)

    Pridham, N.F.

    1997-01-01

    The deregulation of the gas and electric power industries, and how it will impact on customer service and pricing rates was discussed. This paper described the present situation, reviewed core competencies, and outlined future expectations. The bottom line is that major energy consumers are very conscious of energy costs and go to great lengths to keep them under control. At the same time, solutions proposed to reduce energy costs must benefit all classes of consumers, be they industrial, commercial, institutional or residential. Deregulation and competition at an accelerated pace is the most likely answer. This may be forced by external forces such as foreign energy providers who are eager to enter the Canadian energy market. It is also likely that the competition and convergence between gas and electricity is just the beginning, and may well be overshadowed by other deregulated industries as they determine their core competencies

  2. What HERA May Provide?

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Hannes; /DESY; De Roeck, Albert; /CERN; Bartels, Jochen; /Hamburg U., Inst. Theor. Phys. II; Behnke, Olaf; Blumlein, Johannes; /DESY; Brodsky, Stanley; /SLAC /Durham U., IPPP; Cooper-Sarkar, Amanda; /Oxford U.; Deak, Michal; /DESY; Devenish, Robin; /Oxford U.; Diehl, Markus; /DESY; Gehrmann, Thomas; /Zurich U.; Grindhammer, Guenter; /Munich, Max Planck Inst.; Gustafson, Gosta; /CERN /Lund U., Dept. Theor. Phys.; Khoze, Valery; /Durham U., IPPP; Knutsson, Albert; /DESY; Klein, Max; /Liverpool U.; Krauss, Frank; /Durham U., IPPP; Kutak, Krzysztof; /DESY; Laenen, Eric; /NIKHEF, Amsterdam; Lonnblad, Leif; /Lund U., Dept. Theor. Phys.; Motyka, Leszek; /Hamburg U., Inst. Theor. Phys. II /Birmingham U. /Southern Methodist U. /DESY /Piemonte Orientale U., Novara /CERN /Paris, LPTHE /Hamburg U. /Penn State U.

    2011-11-10

    More than 100 people participated in a discussion session at the DIS08 workshop on the topic What HERA may provide. A summary of the discussion with a structured outlook and list of desirable measurements and theory calculations is given. The HERA accelerator and the HERA experiments H1, HERMES and ZEUS stopped running in the end of June 2007. This was after 15 years of very successful operation since the first collisions in 1992. A total luminosity of {approx} 500 pb{sup -1} has been accumulated by each of the collider experiments H1 and ZEUS. During the years the increasingly better understood and upgraded detectors and HERA accelerator have contributed significantly to this success. The physics program remains in full swing and plenty of new results were presented at DIS08 which are approaching the anticipated final precision, fulfilling and exceeding the physics plans and the previsions of the upgrade program. Most of the analyses presented at DIS08 were still based on the so called HERA I data sample, i.e. data taken until 2000, before the shutdown for the luminosity upgrade. This sample has an integrated luminosity of {approx} 100 pb{sup -1}, and the four times larger statistics sample from HERA II is still in the process of being analyzed.

  3. Designated Places

    Data.gov (United States)

    California Natural Resource Agency — Census 2000 Place Names provides a seamless statewide GIS layer of places, including census designated places (CDP), consolidated cities, and incorporated places,...

  4. Wrist range of motion and motion frequency during toy and game play with a joint-specific controller specially designed to provide neuromuscular therapy: A proof of concept study in typically developing children.

    Science.gov (United States)

    Crisco, Joseph J; Schwartz, Joel B; Wilcox, Bethany; Brideau, Holly; Basseches, Benjamin; Kerman, Karen

    2015-08-20

    Upper extremities affected by hemiplegic cerebral palsy (CP) and other neuromuscular disorders have been demonstrated to benefit from therapy, and the greater the duration of the therapy, the greater the benefit. A great motivator for participating in and extending the duration of therapy with children is play. Our focus is on active motion therapy of the wrist and forearm. In this study we examine the wrist motions associated with playing with two toys and three computer games controlled by a specially-designed play controller. Twenty children (ages 5-11) with no diagnosis of a muscular disorder were recruited. The play controller was fitted to the wrist and forearm of each child and used to measure and log wrist flexion and extension. Play activity and enjoyment were quantified by average wrist range of motion (ROM), motion frequency measures, and a discrete visual scale. We found significant differences in the average wrist ROM and motion frequency among the toys and games, yet there were no differences in the level of enjoyment across all toys and games, which was high. These findings indicate which toys and games may elicit the greater number of goal-directed movements, and lay the foundation for our long-term goal to develop and evaluate innovative motion-specific play controllers that are engaging rehabilitative devices for enhancing therapy and promoting neural plasticity and functional recovery in children with CP. Copyright © 2015 Elsevier Ltd. All rights reserved.

  5. Provide Views | Efficient Windows Collaborative

    Science.gov (United States)

    Foundry Foundry New Construction Windows Window Selection Tool Selection Process Design Guidance Installation Replacement Windows Window Selection Tool Assessing Options Selection Process Design Guidance Installation Understanding Windows Benefits Design Considerations Measuring Performance Performance Standards

  6. Providing global WLCG transfer monitoring

    International Nuclear Information System (INIS)

    Andreeva, J; Dieguez Arias, D; Campana, S; Keeble, O; Magini, N; Molnar, Z; Ro, G; Saiz, P; Salichos, M; Tuckett, D; Flix, J; Oleynik, D; Petrosyan, A; Uzhinsky, A; Wildish, T

    2012-01-01

    The WLCG[1] Transfers Dashboard is a monitoring system which aims to provide a global view of WLCG data transfers and to reduce redundancy in monitoring tasks performed by the LHC experiments. The system is designed to work transparently across LHC experiments and across the various technologies used for data transfer. Currently each LHC experiment monitors data transfers via experiment-specific systems but the overall cross-experiment picture is missing. Even for data transfers handled by FTS, which is used by 3 LHC experiments, monitoring tasks such as aggregation of FTS transfer statistics or estimation of transfer latencies are performed by every experiment separately. These tasks could be performed once, centrally, and then served to all experiments via a well-defined set of APIs. In the design and development of the new system, experience accumulated by the LHC experiments in the data management monitoring area is taken into account and a considerable part of the code of the ATLAS DDM Dashboard is being re-used. The paper describes the architecture of the Global Transfer monitoring system, the implementation of its components and the first prototype.

  7. Designing Interfaces

    CERN Document Server

    Tidwell, Jenifer

    2010-01-01

    Despite all of the UI toolkits available today, it's still not easy to design good application interfaces. This bestselling book is one of the few reliable sources to help you navigate through the maze of design options. By capturing UI best practices and reusable ideas as design patterns, Designing Interfaces provides solutions to common design problems that you can tailor to the situation at hand. This updated edition includes patterns for mobile apps and social media, as well as web applications and desktop software. Each pattern contains full-color examples and practical design advice th

  8. Providing cleaner air to Canadians

    International Nuclear Information System (INIS)

    2001-02-01

    This booklet is designed to explain salient aspects of the Ozone Annex, negotiated and signed recently by Canada and the United States, in a joint effort to improve air quality in North America. By significantly reducing the transboundary flows of air pollutants that cause smog, the Ozone Annex will benefit some 16 million people in central and eastern Canada and provide an example for a future round of negotiations to address concerns of the millions of Canadians and Americans who live in the border area between British Columbia and Washington State. The brochure provide summaries of the Canadian and American commitments, focusing on transportation, monitoring and reporting. The Ozone Annex complements other air quality initiatives by the Government of Canada enacted under the Environmental Protection Act, 1999. These measures include regulations to reduce sulphur content to 30 parts per million by Jan 1, 2005; proposing to restrict toxic particulate matter (PM) to less than 10 microns; establishing daily smog forecasts in the Maritimes and committing to a national program built upon existing smog advisories and forecasts in Quebec, Ontario and British Columbia; and investing in more clean air research through the newly created Canadian Foundation for Climate and Atmospheric Sciences

  9. Fish Farm Challenge Provides STEM Design Experiences for Youth

    Science.gov (United States)

    Horton , Robert L.; House, Patty L.

    2015-01-01

    In 2014, Monsanto Corporation partnered with National 4-H Council to help inspire and develop professional skills among young agriculturalists. The Ohio State University created Fish Farm Challenge, which engaged more than 8,000 youth across eight states. Youth were taught about worldwide food insecurity and the importance of aquaculture. They…

  10. Providing Market Information for Ethiopian Farmers: Extending Participatory Design

    DEFF Research Database (Denmark)

    Zewge, Amanuel; Dittrich, Yvonne; Bekele, Rahel

    In a developing country like Ethiopia, marketing of agricultural products is influenced by local, socioeconomic, cultural and IT infrastructure characteristics. ICT-based agriculture information systems have been proposed to support farmers with market information. However, such initiatives have...

  11. Design spaces

    DEFF Research Database (Denmark)

    2005-01-01

    Digital technologies and media are becoming increasingly embodied and entangled in the spaces and places at work and at home. However, our material environment is more than a geometric abstractions of space: it contains familiar places, social arenas for human action. For designers, the integration...... of digital technology with space poses new challenges that call for new approaches. Creative alternatives to traditional systems methodologies are called for when designers use digital media to create new possibilities for action in space. Design Spaces explores how design and media art can provide creative...... alternatives for integrating digital technology with space. Connecting practical design work with conceptual development and theorizing, art with technology, and usesr-centered methods with social sciences, Design Spaces provides a useful research paradigm for designing ubiquitous computing. This book...

  12. Computerized provider order entry systems.

    Science.gov (United States)

    2001-01-01

    Computerized provider order entry (CPOE) systems are designed to replace a hospital's paper-based ordering system. They allow users to electronically write the full range of orders, maintain an online medication administration record, and review changes made to an order by successive personnel. They also offer safety alerts that are triggered when an unsafe order (such as for a duplicate drug therapy) is entered, as well as clinical decision support to guide caregivers to less expensive alternatives or to choices that better fit established hospital protocols. CPOE systems can, when correctly configured, markedly increase efficiency and improve patient safety and patient care. However, facilities need to recognize that currently available CPOE systems require a tremendous amount of time and effort to be spent in customization before their safety and clinical support features can be effectively implemented. What's more, even after they've been customized, the systems may still allow certain unsafe orders to be entered. Thus, CPOE systems are not currently a quick or easy remedy for medical errors. ECRI's Evaluation of CPOE systems--conducted in collaboration with the Institute for Safe Medication Practices (ISMP)--discusses these and other related issues. It also examines and compares CPOE systems from three suppliers: Eclipsys Corp., IDX Systems Corp., and Siemens Medical Solutions Health Services Corp. Our testing focuses primarily on the systems' interfacing capabilities, patient safeguards, and ease of use.

  13. Cryostat Design

    Energy Technology Data Exchange (ETDEWEB)

    Parma, V [European Organization for Nuclear Research, Geneva (Switzerland)

    2014-07-01

    This paper aims to give non-expert engineers and scientists working in the domain of accelerators a general introduction to the main disciplines and technologies involved in the design and construction of accelerator cryostats. Far from being an exhaustive coverage of these topics, an attempt is made to provide simple design and calculation rules for a preliminary design of cryostats. Recurrent reference is made to the Large Hadron Collider magnet cryostats, as most of the material presented is taken from their design and construction at CERN.

  14. Provider-associated factors in obstetric interventions

    NARCIS (Netherlands)

    Pel, M.; Heres, M. H.; Hart, A. A.; van der Veen, F.; Treffers, P. E.

    1995-01-01

    OBJECTIVE: To assess which factors influence provider-associated differences in obstetric interventions. STUDY DESIGN: A survey of obstetricians and co-workers in a sample consisting of 38 Dutch hospitals was taken, using a questionnaire that contained questions about personal and hospital-policy

  15. Providence Sponsors Diocesan Teacher Recruiting Campaign.

    Science.gov (United States)

    Dygert, William

    2001-01-01

    Addresses the issue of teacher recruitment in Providence, Rhode Island. Explains that the Catholic education staff designed a campaign that involved creating marketing materials, advertising in daily newspapers, and holding job fairs and open houses. Stresses the importance of promoting teaching at Catholic schools as both rewarding and…

  16. Preferred Provider Organization (PPO) Plans

    Science.gov (United States)

    ... Find & compare doctors, hospitals, & other providers Preferred Provider Organization (PPO) Plans How PPO Plans Work A Medicare ... extra for these benefits. Related Resources Health Maintenance Organization (HMO) Private Fee-for-Service (PFFS) Special Needs ...

  17. Would it provide Free Education?

    Indian Academy of Sciences (India)

    First page Back Continue Last page Overview Graphics. Would it provide Free Education? Would it provide Free Education? Would it provide Compulsory Education? Would it guarantee education of equitable quality? Would it prevent discrimination? Would it stop schools that promote inequality & discrimination? NO! NO!

  18. ECO DESIGN IN DESIGN PROCESS

    Directory of Open Access Journals (Sweden)

    PRALEA Jeni

    2014-05-01

    Full Text Available Eco-design is a new domain, required by the new trends and existing concerns worldwide, generated by the necessity of adopting new design principles. New design principles require the designer to provide a friendly relationship between concept created, environment and consume. This "friendly" relationship should be valid both at present and in the future, generating new opportunities for product, product components or materials from which it was made. Awareness, by the designer, the importance of this new trend, permits the establishment of concepts that have as their objective the protection of present values and ensuring the legacy of future generations. Ecodesig, by its principles, is involved in the design process, from early stage, the stage of product design. Priority objective of the designers will consist in reducing the negative effects on the environment through the entire life cycle and after it is taken out of use. The main aspects of the eco-design will consider extending product exploitation, make better use of materials, reduction of emission of waste. The design process in the "eco"domein must be started by selecting the function of the concept, materials and technological processes, causing the shape of macro and micro geometric of the product through an analysis that involves optimizing and streamlining the product. This paper presents the design process of a cross-sports footwear concept, built on the basis of the principles of ecodesign

  19. Design Methodology - Design Synthesis

    DEFF Research Database (Denmark)

    Andreasen, Mogens Myrup

    2003-01-01

    Design Methodology is part of our practice and our knowledge about designing, and it has been strongly supported by the establishing and work of a design research community. The aim of this article is to broaden the reader¿s view of designing and Design Methodology. This is done by sketching...... the development of Design Methodology through time and sketching some important approaches and methods. The development is mainly forced by changing industrial condition, by the growth of IT support for designing, but also by the growth of insight into designing created by design researchers.......ABSTRACT Design Methodology shall be seen as our understanding of how to design; it is an early (emerging late 60ies) and original articulation of teachable and learnable methodics. The insight is based upon two sources: the nature of the designed artefacts and the nature of human designing. Today...

  20. Provider Opinions Regarding the Development of a Stigma-Reduction Intervention Tailored for Providers

    Science.gov (United States)

    Mittal, Dinesh; Corrigan, Patrick; Drummond, Karen L.; Porchia, Sylvia; Sullivan, Greer

    2016-01-01

    Interventions involving contact with a person who has recovered from mental illness are most effective at reducing stigma. This study sought input from health care providers to inform the design of a contact intervention intended to reduce provider stigma toward persons with serious mental illness. Using a purposive sampling strategy, data were…

  1. Design Anthropology

    DEFF Research Database (Denmark)

    This edited volume provides an introduction to the emerging field of design anthropology from the point of view of anthropologists engaging in its development. Contributors include young anthropologists with experience in the field and leading theoreticians, who combine to articulate the specific...... style of knowing involved in doing design anthropology. So far design anthropology has been developed mostly in the practice of industry and the public sector, in particular in Scandinavia and the US, and the sustained academic reflection to support this practice is still in its early stages. This book...... will contribute to this theoretical reflection and provide a reference for practitioners, teachers and students of anthropology, as well as design and innovation....

  2. Designing Material Materialising Design

    DEFF Research Database (Denmark)

    Nicholas, Paul

    2013-01-01

    Designing Material Materialising Design documents five projects developed at the Centre for Information Technology and Architecture (CITA) at the Royal Danish Academy of Fine Arts, School of Architecture. These projects explore the idea that new designed materials might require new design methods....... Focusing on fibre reinforced composites, this book sustains an exploration into the design and making of elastically tailored architectural structures that rely on the use of computational design to predict sensitive interdependencies between geometry and behaviour. Developing novel concepts...

  3. Patient choice of providers in a preferred provider organization.

    Science.gov (United States)

    Wouters, A V; Hester, J

    1988-03-01

    This article is an analysis of patient choice of providers by the employees of the Security Pacific Bank of California and their dependents who have access to the Med Network Preferred Provider Organization (PPO). The empirical results show that not only is the PPO used by individuals who require relatively little medical care (as measured by predicted office visit charges) but that the PPO is most intensively used for low-risk services such as treatment for minor illness and preventive care. Also, the most likely Security Pacific Health Care beneficiary to use a PPO provider is a recently hired employee who lives in the south urban region, has a relatively low income, does not have supplemental insurance coverage, and is without previous attachments to non-PPO primary care providers. In order to maximize their ability to reduce plan paid benefits, insurers who contract with PPOs should focus on increasing PPO utilization among poorer health risks.

  4. Perspectives of addiction treatment providers

    African Journals Online (AJOL)

    Background. General practitioners are referring patients with codeine-related problems to specialist treatment facilities, but little is known about the addiction treatment providers, the kinds of treatment they provide, and whether training or other interventions are needed to strengthen this sector. Objectives. To investigate the ...

  5. Babesiosis for Health Care Providers

    Centers for Disease Control (CDC) Podcasts

    2012-04-25

    This podcast will educate health care providers on diagnosing babesiosis and providing patients at risk with tick bite prevention messages.  Created: 4/25/2012 by Center for Global Health, Division of Parasitic Diseases and Malaria.   Date Released: 4/25/2012.

  6. Incentives and provider payment methods.

    Science.gov (United States)

    Barnum, H; Kutzin, J; Saxenian, H

    1995-01-01

    The mode of payment creates powerful incentives affecting provider behavior and the efficiency, equity and quality outcomes of health finance reforms. This article examines provider incentives as well as administrative costs, and institutional conditions for successful implementation associated with provider payment alternatives. The alternatives considered are budget reforms, capitation, fee-for-service, and case-based reimbursement. We conclude that competition, whether through a regulated private sector or within a public system, has the potential to improve the performance of any payment method. All methods generate both adverse and beneficial incentives. Systems with mixed forms of provider payment can provide tradeoffs to offset the disadvantages of individual modes. Low-income countries should avoid complex payment systems requiring higher levels of institutional development.

  7. Mobilities Design

    DEFF Research Database (Denmark)

    Jensen, Ole B.; Lanng, Ditte Bendix; Wind, Simon

    2016-01-01

    In this paper, we identify the nexus between design (architecture, urban design, service design, etc.) and mobilities as a new and emerging research field. In this paper, we apply a “situational mobilities” perspective and take point of departure in the pragmatist question: “What design decisions...... and interventions affords this particular mobile situation?” The paper presents the contours of an emerging research agenda within mobilities research. The advent of “mobilities design” as an emerging research field points towards a critical interest in the material as well as practical consequences of contemporary......-making. The paper proposes that increased understanding of the material affordances facilitated through design provides important insight to planning and policymaking that at times might be in risk of becoming too detached from the everyday life of the mobile subject within contemporary mobilities landscapes....

  8. Medicare Referring Provider DMEPOS PUF

    Data.gov (United States)

    U.S. Department of Health & Human Services — This dataset, which is part of CMSs Medicare Provider Utilization and Payment Data, details information on Durable Medical Equipment, Prosthetics, Orthotics and...

  9. Lodging Update: Providence, Rhode Island

    Directory of Open Access Journals (Sweden)

    Ragel Roginsky

    2013-04-01

    Full Text Available Each quarter, Pinnacle Advisory Group prepares an analysis of the New England lodging industry, which provides a regional summary and then focuses in depth on a particular market. These reviews look at recent and proposed supply changes, factors affecting demand and growth rates, and the effects of interactions between such supply and demand trends. In this issue, the authors spotlight the lodging market in Providence, Rhode Island.

  10. Providing Feedback: Practical Skills and Strategies.

    Science.gov (United States)

    Sarkany, David; Deitte, Lori

    2017-06-01

    Feedback is an essential component of education. It is designed to influence, reinforce, and change behaviors, concepts, and attitudes in learners. Although providing constructive feedback can be challenging, it is a learnable skill. The negative consequences of destructive feedback or lack of feedback all together are far-reaching. This article summarizes the components of constructive feedback and provides readers with tangible skills to enhance their ability to give effective feedback to learners and peers. Copyright © 2017 The Association of University Radiologists. Published by Elsevier Inc. All rights reserved.

  11. Ancillary Services Provided from DER

    Energy Technology Data Exchange (ETDEWEB)

    Campbell, J.B.

    2005-12-21

    Distributed energy resources (DER) are quickly making their way to industry primarily as backup generation. They are effective at starting and then producing full-load power within a few seconds. The distribution system is aging and transmission system development has not kept up with the growth in load and generation. The nation's transmission system is stressed with heavy power flows over long distances, and many areas are experiencing problems in providing the power quality needed to satisfy customers. Thus, a new market for DER is beginning to emerge. DER can alleviate the burden on the distribution system by providing ancillary services while providing a cost adjustment for the DER owner. This report describes 10 types of ancillary services that distributed generation (DG) can provide to the distribution system. Of these 10 services the feasibility, control strategy, effectiveness, and cost benefits are all analyzed as in the context of a future utility-power market. In this market, services will be provided at a local level that will benefit the customer, the distribution utility, and the transmission company.

  12. Ecosystem services provided by waterbirds.

    Science.gov (United States)

    Green, Andy J; Elmberg, Johan

    2014-02-01

    Ecosystem services are ecosystem processes that directly or indirectly benefit human well-being. There has been much recent literature identifying different services and the communities and species that provide them. This is a vital first step towards management and maintenance of these services. In this review, we specifically address the waterbirds, which play key functional roles in many aquatic ecosystems, including as predators, herbivores and vectors of seeds, invertebrates and nutrients, although these roles have often been overlooked. Waterbirds can maintain the diversity of other organisms, control pests, be effective bioindicators of ecological conditions, and act as sentinels of potential disease outbreaks. They also provide important provisioning (meat, feathers, eggs, etc.) and cultural services to both indigenous and westernized societies. We identify key gaps in the understanding of ecosystem services provided by waterbirds and areas for future research required to clarify their functional role in ecosystems and the services they provide. We consider how the economic value of these services could be calculated, giving some examples. Such valuation will provide powerful arguments for waterbird conservation. © 2013 The Authors. Biological Reviews © 2013 Cambridge Philosophical Society.

  13. Enstore with Chimera namespace provider

    International Nuclear Information System (INIS)

    Litvintsev, Dmitry; Moibenko, Alexander; Oleynik, Gene; Zalokar, Michael

    2012-01-01

    Enstore is a mass storage system developed by Fermilab that provides distributed access and management of data stored on tapes. It uses a namespace service, PNFS, developed by DESY to provide a filesystem-like view of the stored data. PNFS is a legacy product and is being replaced by a new implementation, called Chimera, which is also developed by DESY. Chimera offers multiple advantages over PNFS in terms of performance and functionality. The Enstore client component, encp, has been modified to work with Chimera, as well as with any other namespace provider. We performed high load end-to-end acceptance test of Enstore with the Chimera namespace. This paper describes the modifications to Enstore, the test procedure and the results of the acceptance testing.

  14. Dangertalk: Voices of abortion providers.

    Science.gov (United States)

    Martin, Lisa A; Hassinger, Jane A; Debbink, Michelle; Harris, Lisa H

    2017-07-01

    Researchers have described the difficulties of doing abortion work, including the psychosocial costs to individual providers. Some have discussed the self-censorship in which providers engage in to protect themselves and the pro-choice movement. However, few have examined the costs of this self-censorship to public discourse and social movements in the US. Using qualitative data collected during abortion providers' discussions of their work, we explore the tensions between their narratives and pro-choice discourse, and examine the types of stories that are routinely silenced - narratives we name "dangertalk". Using these data, we theorize about the ways in which giving voice to these tensions might transform current abortion discourse by disrupting false dichotomies and better reflecting the complex realities of abortion. We present a conceptual model for dangertalk in abortion discourse, connecting it to functions of dangertalk in social movements more broadly. Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. Designing Communication Design

    DEFF Research Database (Denmark)

    Løvlie, Anders Sundnes

    2016-01-01

    Innovating in the field of new media genres requires methods for producing designs that can succeed in being disseminated and used outside of design research labs. This article uses the author's experiences with the development of university courses in communication design to address the research...... question: How can we design courses to give students the competencies they need to work as designers of new media? Based on existing approaches from UX design and other fields, I present a model that has demonstrated its usefulness in the development of commercial products and services. The model...

  16. EAMJ Provider April 10.indd

    African Journals Online (AJOL)

    2010-04-04

    Apr 4, 2010 ... from 14 to 30 days in studies done in Europe and. North America ... to confirmatory laboratory diagnostic test was 56.2 days (n=83, range 1 to 985 days, standard .... (9,10). In a population based study in German, Volker ... risk factors for provider delays (9). ... mammographic reliability for cancer diagnosis at.

  17. Device provides controlled gas leaks

    Science.gov (United States)

    Kami, S. K.; King, H. J.

    1968-01-01

    Modified palladium leak device provides a controlled release /leak/ of very small quantities of gas at low or medium pressures. It has no moving parts, requires less than 5 watts to operate, and is capable of releasing the gas either continuously or in pulses at adjustable flow rates.

  18. Twitter for travel medicine providers.

    Science.gov (United States)

    Mills, Deborah J; Kohl, Sarah E

    2016-03-01

    Travel medicine practitioners, perhaps more so than medical practitioners working in other areas of medicine, require a constant flow of information to stay up-to-date, and provide best practice information and care to their patients. Many travel medicine providers are unaware of the popularity and potential of the Twitter platform. Twitter use among our travellers, as well as by physicians and health providers, is growing exponentially. There is a rapidly expanding body of published literature on this information tool. This review provides a brief overview of the ways Twitter is being used by health practitioners, the advantages that are peculiar to Twitter as a platform of social media, and how the interested practitioner can get started. Some key points about the dark side of Twitter are highlighted, as well as the potential benefits of using Twitter as a way to disseminate accurate medical information to the public. This article will help readers develop an increased understanding of Twitter as a tool for extracting useful facts and insights from the ever increasing volume of health information. © International Society of Travel Medicine, 2016. All rights reserved. Published by Oxford University Press. For permissions, please e-mail: journals.permissions@oup.com.

  19. Ecosystem services provided by bats.

    Science.gov (United States)

    Kunz, Thomas H; Braun de Torrez, Elizabeth; Bauer, Dana; Lobova, Tatyana; Fleming, Theodore H

    2011-03-01

    Ecosystem services are the benefits obtained from the environment that increase human well-being. Economic valuation is conducted by measuring the human welfare gains or losses that result from changes in the provision of ecosystem services. Bats have long been postulated to play important roles in arthropod suppression, seed dispersal, and pollination; however, only recently have these ecosystem services begun to be thoroughly evaluated. Here, we review the available literature on the ecological and economic impact of ecosystem services provided by bats. We describe dietary preferences, foraging behaviors, adaptations, and phylogenetic histories of insectivorous, frugivorous, and nectarivorous bats worldwide in the context of their respective ecosystem services. For each trophic ensemble, we discuss the consequences of these ecological interactions on both natural and agricultural systems. Throughout this review, we highlight the research needed to fully determine the ecosystem services in question. Finally, we provide a comprehensive overview of economic valuation of ecosystem services. Unfortunately, few studies estimating the economic value of ecosystem services provided by bats have been conducted to date; however, we outline a framework that could be used in future studies to more fully address this question. Consumptive goods provided by bats, such as food and guano, are often exchanged in markets where the market price indicates an economic value. Nonmarket valuation methods can be used to estimate the economic value of nonconsumptive services, including inputs to agricultural production and recreational activities. Information on the ecological and economic value of ecosystem services provided by bats can be used to inform decisions regarding where and when to protect or restore bat populations and associated habitats, as well as to improve public perception of bats. © 2011 New York Academy of Sciences.

  20. Management systems for service providers

    International Nuclear Information System (INIS)

    Bolokonya, Herbert Chiwalo

    2015-02-01

    In the field of radiation safety and protection there are a number of institutions that are involved in achieving different goals and strategies. These strategies and objectives are achieved based on a number of tools and systems, one of these tools and systems is the use of a management system. This study aimed at reviewing the management system concept for Technical Service Providers in the field of radiation safety and protection. The main focus was on personal monitoring services provided by personal dosimetry laboratories. A number of key issues were found to be prominent to make the management system efficient. These are laboratory accreditation, approval; having a customer driven operating criteria; and controlling of records and good reporting. (au)

  1. Support Net for Frontline Providers

    Science.gov (United States)

    2016-03-01

    learning style , as well as treatment readiness (Proudfoot et al., 2011). Several channels of delivery include audio, video, email correspondence and...Provided Resources (1) o “Self assessment, resources were good.” Coaching (2) o “During this coaching period, I had a death of a parent , I did find the...Secondary Traumatic Stress Scale. Res Soc Work Pract. 2004; 14(1):27–35. 21. Pyevich CM, Newman E, Daleiden E. The relationship among cognitive

  2. Design livre: cannibalistic interaction design

    NARCIS (Netherlands)

    van Amstel, Frederick; Vassao, C.A.; Ferraz, G.B.; Formia, E.M.

    2012-01-01

    This paper provides a historical account of cannibalism as used to explain how Brazilians integrate foreign cultural influences into their own culture and introduces a design praxis based on it. From Modernism to Digital Culture, cannibalism is a recurring tactic used to overcome cultural traditions

  3. Organizational culture associated with provider satisfaction.

    Science.gov (United States)

    Scammon, Debra L; Tabler, Jennifer; Brunisholz, Kimberly; Gren, Lisa H; Kim, Jaewhan; Tomoaia-Cotisel, Andrada; Day, Julie; Farrell, Timothy W; Waitzman, Norman J; Magill, Michael K

    2014-01-01

    Organizational culture is key to the successful implementation of major improvement strategies. Transformation to a patient-centered medical home (PCHM) is such an improvement strategy, requiring a shift from provider-centric care to team-based care. Because this shift may impact provider satisfaction, it is important to understand the relationship between provider satisfaction and organizational culture, specifically in the context of practices that have transformed to a PCMH model. This was a cross-sectional study of surveys conducted in 2011 among providers and staff in 10 primary care clinics implementing their version of a PCMH: Care by Design. Measures included the Organizational Culture Assessment Instrument and the American Medical Group Association provider satisfaction survey. Providers were most satisfied with quality of care (mean, 4.14; scale of 1-5) and interactions with patients (mean, 4.12) and were least satisfied with time spent working (mean, 3.47), paperwork (mean, 3.45), and compensation (mean, 3.35). Culture profiles differed across clinics, with family/clan and hierarchical cultures the most common. Significant correlations (P ≤ .05) between provider satisfaction and clinic culture archetypes included family/clan culture negatively correlated with administrative work; entrepreneurial culture positively correlated with the Time Spent Working dimension; market/rational culture positively correlated with how practices were facing economic and strategic challenges; and hierarchical culture negatively correlated with the Relationships with Staff and Resource dimensions. Provider satisfaction is an important metric for assessing experiences with features of a PCMH model. Identification of clinic-specific culture archetypes and archetype associations with provider satisfaction can help inform practice redesign. Attention to effective methods for changing organizational culture is recommended.

  4. Mechanisms Design

    DEFF Research Database (Denmark)

    Restrepo-Giraldo, John Dairo

    2006-01-01

    Most products and machines involve some kind of controlled movement. From window casements to DVD players, from harbor cranes to the shears to prune your garden, all these machines require mechanisms to move. This course intends to provide the analytical and conceptual tools to design such mechan......Most products and machines involve some kind of controlled movement. From window casements to DVD players, from harbor cranes to the shears to prune your garden, all these machines require mechanisms to move. This course intends to provide the analytical and conceptual tools to design...... using criteria such as size, performance parameters, operation environment, etc. Content: Understanding Mechanisms Design (2 weeks) Definitions, mechanisms representations, kinematic diagrams, the four bar linkage, mobility, applications of mechanisms, types of mechanisms, special mechanisms, the design......: equations for various mechanisms. At the end of this module you will be able to analyze existing mechanisms and to describe their movement. Designing mechanisms (7 weeks) Type synthesis and dimensional synthesis, function generation, path generation, three precision points in multi-loop mechanisms...

  5. Medicaid provider reimbursement policy for adult immunizations☆

    Science.gov (United States)

    Stewart, Alexandra M.; Lindley, Megan C.; Cox, Marisa A.

    2015-01-01

    Background State Medicaid programs establish provider reimbursement policy for adult immunizations based on: costs, private insurance payments, and percentage of Medicare payments for equivalent services. Each program determines provider eligibility, payment amount, and permissible settings for administration. Total reimbursement consists of different combinations of Current Procedural Terminology codes: vaccine, vaccine administration, and visit. Objective Determine how Medicaid programs in the 50 states and the District of Columbia approach provider reimbursement for adult immunizations. Design Observational analysis using document review and a survey. Setting and participants Medicaid administrators in 50 states and the District of Columbia. Measurements Whether fee-for-service programs reimburse providers for: vaccines; their administration; and/or office visits when provided to adult enrollees. We assessed whether adult vaccination services are reimbursed when administered by a wide range of providers in a wide range of settings. Results Medicaid programs use one of 4 payment methods for adults: (1) a vaccine and an administration code; (2) a vaccine and visit code; (3) a vaccine code; and (4) a vaccine, visit, and administration code. Limitations Study results do not reflect any changes related to implementation of national health reform. Nine of fifty one programs did not respond to the survey or declined to participate, limiting the information available to researchers. Conclusions Medicaid reimbursement policy for adult vaccines impacts provider participation and enrollee access and uptake. While programs have generally increased reimbursement levels since 2003, each program could assess whether current policies reflect the most effective approach to encourage providers to increase vaccination services. PMID:26403369

  6. Providing Southern Perspectives on CSR

    DEFF Research Database (Denmark)

    Jeppesen, Søren; Kothuis, Bas

    The article seeks to contribute to the SMEs and CSR literature in developing countries by providing; a) a ‘Southern’ SME perspective, which includes the voices of managers and workers, b) a perspective of CSR, which opens up to informal CSR practices that SMEs undertake, and c) an analysis...... of the key institutional issues affecting the CSR practices of SMEs. It presents perceptions of CSR practices among 21 SMEs in the garment industry in South Africa, based on 40 interviews with managers and 19 interviews with workers through the use of qualitative and quantitative interview frameworks....... It highlights a high degree of similarities between managers and workers, though knowledge of (cognitive level) the concept ‘CSR’ differ considerably. Informal practices are widespread and of key importance to the SMEs, expressed by managers and workers alike. History, industry and manager-workers relations...

  7. Wind Turbine Providing Grid Support

    DEFF Research Database (Denmark)

    2011-01-01

    changing the operation of the wind turbine to a more efficient working point.; When the rotational speed of the rotor reaches a minimum value, the wind turbine enters a recovery period to re-accelerate the rotor to the nominal rotational speed while further contributing to the stability of the electrical......A variable speed wind turbine is arranged to provide additional electrical power to counteract non-periodic disturbances in an electrical grid. A controller monitors events indicating a need to increase the electrical output power from the wind turbine to the electrical grid. The controller...... is arranged to control the wind turbine as follows: after an indicating event has been detected, the wind turbine enters an overproduction period in which the electrical output power is increased, wherein the additional electrical output power is taken from kinetic energy stored in the rotor and without...

  8. Vaccines provided by family physicians.

    Science.gov (United States)

    Campos-Outcalt, Doug; Jeffcott-Pera, Michelle; Carter-Smith, Pamela; Schoof, Bellinda K; Young, Herbert F

    2010-01-01

    This study was conducted to document current immunization practices by family physicians. In 2008 the American Academy of Family Physicians (AAFP) conducted a survey among a random sample of 2,000 of its members who reported spending 80% or more of their time in direct patient care. The survey consisted of questions regarding the demographics of the practice, vaccines that are provided at the physicians' clinical site, whether the practice refers patients elsewhere for vaccines, and participation in the Vaccines for Children (VFC) program. The response rate was 38.5%, 31.8% after non-office-based respondents were deleted. A high proportion of respondents (80% or more) reported providing most routinely recommended child, adolescent, and adult vaccines at their practice sites. The exceptions were rotavirus vaccine for children and herpes zoster vaccine for adults., A significant proportion, however, reported referring elsewhere for some vaccines (44.1% for children and adolescent vaccines and 53.5% for adult vaccines), with the most frequent referral location being a public health department. A higher proportion of solo and 2-physician practices than larger practices reported referring patients. A lack of adequate payment was listed as the reason for referring patients elsewhere for vaccines by one-half of those who refer patients. One-half of responders do not participate in the VFC program. Provision of recommended vaccines by most family physicians remains an important service. Smaller practices have more difficulty offering a full array of vaccine products, and lack of adequate payment contributes to referring patients outside the medical home. The reasons behind the lack of participation in the VFC program deserve further study.

  9. Robotics Algorithms Provide Nutritional Guidelines

    Science.gov (United States)

    2009-01-01

    On July 5, 1997, a small robot emerged from its lander like an insect from an egg, crawling out onto the rocky surface of Mars. About the size of a child s wagon, NASA s Sojourner robot was the first successful rover mission to the Red Planet. For 83 sols (Martian days, typically about 40 minutes longer than Earth days), Sojourner - largely remote controlled by NASA operators on Earth - transmitted photos and data unlike any previously collected. Sojourner was perhaps the crowning achievement of the NASA Space Telerobotics Program, an Agency initiative designed to push the limits of robotics in space. Telerobotics - devices that merge the autonomy of robotics with the direct human control of teleoperators - was already a part of NASA s efforts; probes like the Viking landers that preceded Sojourner on Mars, for example, were telerobotic applications. The Space Telerobotics Program, a collaboration between Ames Research Center, Johnson Space Center, Jet Propulsion Laboratory (JPL), and multiple universities, focused on developing remote-controlled robotics for three main purposes: on-orbit assembly and servicing, science payload tending, and planetary surface robotics. The overarching goal was to create robots that could be guided to build structures in space, monitor scientific experiments, and, like Sojourner, scout distant planets in advance of human explorers. While telerobotics remains a significant aspect of NASA s efforts, as evidenced by the currently operating Spirit and Opportunity Mars rovers, the Hubble Space Telescope, and many others - the Space Telerobotics Program was dissolved and redistributed within the Agency the same year as Sojourner s success. The program produced a host of remarkable technologies and surprising inspirations, including one that is changing the way people eat

  10. Environmental standards provide competitive advantage

    International Nuclear Information System (INIS)

    Chynoweth, E.; Kirshner, E.

    1993-01-01

    Quality organizations are breaking new ground with the development of international standards for environmental management. These promise to provide the platform for chemical companies wanting to establish their environmental credibility with a global audience. open-quotes It will be similar to auditing our customers to ISO 9000 close-quote, says the environmental manager for a European chemical firm. open-quote We will only want to deal with people who have got their environmental act together. And we'll be in a better competitive positions close-quote. The International Organization for Standardization (ISO;Geneva) has set up a taskforce to develop an environmental management standard, which is expected to be completed by the mid-1990s. Observers think the ISO standard will draw heavily on the British Standard Institute's (BSI;London) environmental management standard, BS7750, which will likely be the first system adopted in the world. Published last year, BS7750 has been extensively piloted in the UK (CW, Sept. 30, 1992, p. 62) and is now set to be revised before being offically adopted by BSI. The UK's Chemical Industries Association (CIA;London) is anxious to prevent a proliferation of standards, and its report on BS7750 pilot projects calls for an approach integrating quality, environment, and health and safety. But standard setters, including ISO, appear to be moving in the opposite direction. In the US, the American national Standards Institute (ANSI;Washington) has started work on an environmental management standard

  11. Analog circuit design

    CERN Document Server

    Dobkin, Bob

    2012-01-01

    Analog circuit and system design today is more essential than ever before. With the growth of digital systems, wireless communications, complex industrial and automotive systems, designers are being challenged to develop sophisticated analog solutions. This comprehensive source book of circuit design solutions aids engineers with elegant and practical design techniques that focus on common analog challenges. The book's in-depth application examples provide insight into circuit design and application solutions that you can apply in today's demanding designs. <

  12. Prompting Designers to Design

    DEFF Research Database (Denmark)

    Ahmed, Saeema

    2006-01-01

    Recent research suggest that engineering designers need assistance to understand what information is relevant for their particular design problem. They require guidance in formulating their queries and also to understand what information is relevant for them. This paper presents an approach to pr...

  13. Providing value in ambulatory anesthesia.

    Science.gov (United States)

    Fosnot, Caroline D; Fleisher, Lee A; Keogh, John

    2015-12-01

    colonoscopies. With this projected increase in the demand for anesthesia services nationwide comes the analysis of its financial feasibility. Some early data looking at endoscopist-administered sedation conclude that it offers higher patient satisfaction, there were less adverse effects than anesthesiologist-administered sedation, and is economically advantageous. This and future retrospective studies will help to guide healthcare policymakers and physicians to come to a conclusion about providing ambulatory services for these millions of patients. Ambulatory anesthesia's popularity continues to rise and anesthetic techniques will continue to morph and adapt to the needs of patients seeking ambulatory surgery. Alterations in already existing medications are promising as these modifications allow for quicker recovery from anesthesia or minimization of the already known undesirable side-effects. PONV, pain, obstructive sleep apnea, and chronic comorbidities (hypertension, cardiac disease, and diabetes mellitus) are perioperative concerns in ambulatory settings as more patients are safely being treated in ambulatory settings. Regional anesthesia stands out as a modality that has multiple advantages to general anesthesia, providing a minimal recovery period and a decrease in postanesthesia care unit stay. The implementation of the Affordable Healthcare Act specifically affects ambulatory settings as the demand and need for patients to have screening procedures with anesthesia. The question remains what the best strategy is to meet the needs of our future patients while preserving economically feasibility within an already strained healthcare system.

  14. Design as Value Celebration: Rethinking Design Argumentation

    DEFF Research Database (Denmark)

    Halstrøm, Per Liljenberg

    2016-01-01

    This article introduces knowledge of the rhetorical genre of epideictic to design. The aim is to provide designers with concepts that stimulate their ability to deliberate about design choices and explore the arguments they may be making about the human-made world. The article begins with explora...

  15. SYSTEM ORGANIZATION OF MATERIAL PROVIDING OF BUILDING

    Directory of Open Access Journals (Sweden)

    A. V. Rаdkеvich

    2014-04-01

    Full Text Available Purpose. Development of scientific-methodical bases to the design of rational management of material streams in the field of building providing taking into account intersystem connections with the enterprises of building industry. Methodology. The analysis of last few years of functioning of building industry in Ukraine allows distinguishing a number of problems that negatively influence the steady development of building, as the component of the state economics system. Therefore the research of existent organization methods of the system of building objects providing with material resources is extremely necessary. In connection with this the article justifies the use of method of hierarchies analysis (Saati method for finding the optimal task solution of fixing the enterprises of building industry after building objects. Findings. Results give an opportunity to guidance of building organization to estimate and choose advantageous suppliers - enterprises of building industry, to conduct their rating, estimation taking into account basic descriptions, such as: quality, price, reliability of deliveries, specialization, financial status etc. Originality. On the basis of Saati method the methodologies of organization are improved, planning and managements of the reliable system of providing of building necessary material resources that meet the technological requirements of implementation of building and installation works. Practical value. Contribution to the decisions of many intricate organizational problems that are accompanied by the problems of development of building, provided due to organization of the reliable system of purchase of material resources.

  16. Winged design; Befluegeltes Design

    Energy Technology Data Exchange (ETDEWEB)

    Weber, Tilman

    2013-10-15

    Today the wind rotor blades are about 80 meter long. To keep them light and transportable designers and material scientists come up with a number of ideas. Will the carbon fiber prevail against the glass fiber? [German] Ueber 80 Meter messen die laengsten Rotorblaetter heute. Um sie leicht und transportfaehig zu halten, lassen sich Designer und Materialforscher einiges einfallen. Wird sich die Kohlefaser gegen die Glasfaser durchsetzen?.

  17. Prestressed concrete design

    CERN Document Server

    Hurst, MK

    1998-01-01

    This edition provides up-to-date guidance on the detailed design of prestressed concrete structures. All major topics are dealt with, including prestressed flat slabs, an important and growing application in the design of buildings.

  18. Control system design guide

    Energy Technology Data Exchange (ETDEWEB)

    Sellers, David; Friedman, Hannah; Haasl, Tudi; Bourassa, Norman; Piette, Mary Ann

    2003-05-01

    The ''Control System Design Guide'' (Design Guide) provides methods and recommendations for the control system design process and control point selection and installation. Control systems are often the most problematic system in a building. A good design process that takes into account maintenance, operation, and commissioning can lead to a smoothly operating and efficient building. To this end, the Design Guide provides a toolbox of templates for improving control system design and specification. HVAC designers are the primary audience for the Design Guide. The control design process it presents will help produce well-designed control systems that achieve efficient and robust operation. The spreadsheet examples for control valve schedules, damper schedules, and points lists can streamline the use of the control system design concepts set forth in the Design Guide by providing convenient starting points from which designers can build. Although each reader brings their own unique questions to the text, the Design Guide contains information that designers, commissioning providers, operators, and owners will find useful.

  19. Dansk Design

    DEFF Research Database (Denmark)

    Dickson, Thomas

    Indhold: Hvad er design?; Hvor kommer dansk design fra?; Produktdesign; Tekstil- og tøjdesign; Design af møbler og boligindretning; Bygningen og design; Arbejdets design; Transportdesign; Offentligt design; Grafisk design; Nye tider og en ny slags design...

  20. Design thinking.

    Science.gov (United States)

    Brown, Tim

    2008-06-01

    In the past, design has most often occurred fairly far downstream in the development process and has focused on making new products aesthetically attractive or enhancing brand perception through smart, evocative advertising. Today, as innovation's terrain expands to encompass human-centered processes and services as well as products, companies are asking designers to create ideas rather than to simply dress them up. Brown, the CEO and president of the innovation and design firm IDEO, is a leading proponent of design thinking--a method of meeting people's needs and desires in a technologically feasible and strategically viable way. In this article he offers several intriguing examples of the discipline at work. One involves a collaboration between frontline employees from health care provider Kaiser Permanente and Brown's firm to reengineer nursing-staff shift changes at four Kaiser hospitals. Close observation of actual shift changes, combined with brainstorming and rapid prototyping, produced new procedures and software that radically streamlined information exchange between shifts. The result was more time for nursing, better-informed patient care, and a happier nursing staff. Another involves the Japanese bicycle components manufacturer Shimano, which worked with IDEO to learn why 90% of American adults don't ride bikes. The interdisciplinary project team discovered that intimidating retail experiences, the complexity and cost of sophisticated bikes, and the danger of cycling on heavily trafficked roads had overshadowed people's happy memories of childhood biking. So the team created a brand concept--"Coasting"--to describe a whole new category of biking and developed new in-store retailing strategies, a public relations campaign to identify safe places to cycle, and a reference design to inspire designers at the companies that went on to manufacture Coasting bikes.

  1. Engaging service providers in improving industry performance

    International Nuclear Information System (INIS)

    Oberth, R.

    2012-01-01

    determining if the issue can be dealt with off-line; determining when the answer is needed; doing the 'issue-resolution mapping' completing a rigorous 'root-cause' analysis; and pulling together the needed expertise and resources. The Issue-Definition planning phase is best done through a partnership with service providers in order to provide a firm basis for moving forward. This conference includes a Plenary Session focused on utility - service provider collaboration. I draw your attention to: Wednesday Morning Plenary Presentation on 'Utility-Vendor Partnerships for Refurbishment Projects' by Gary Newman, Chief Engineer and Senior Vice President Engineering, Bruce Power. In the nuclear industry, as in others, projects don't always go as planned. One of our Plenary Speakers will describe an 'execution-process verification audit' process that could be applied to particularly critical processes. This audit could be performed by an independent, third-party who would perform a detailed, top to bottom technical assessment of every step of the particular task process from design to wrench work. Today's luncheon speaker, Jim Cairncross, will explore this 'execution-process verification audit' concept in his talk about lessons-learned from the F-35 program.The first presentation on Wednesday by William Crocker of AMEC, explores the need for making more use for nuclear work, of widely-used tools such as FMEA - failure modes and effects analysis My presentation will explore some of the basic principles that can lead to more effective utility to service-provider working relationships. The principles are derived from an informal survey of a cross section of service providers and utility project leaders and procurement specialists. (author)

  2. Provide Natural Light | Efficient Windows Collaborative

    Science.gov (United States)

    Foundry Foundry New Construction Windows Window Selection Tool Selection Process Design Guidance Installation Replacement Windows Window Selection Tool Assessing Options Selection Process Design Guidance Installation Understanding Windows Benefits Design Considerations Measuring Performance Performance Standards

  3. Provide Fresh Air | Efficient Windows Collaborative

    Science.gov (United States)

    Foundry Foundry New Construction Windows Window Selection Tool Selection Process Design Guidance Installation Replacement Windows Window Selection Tool Assessing Options Selection Process Design Guidance Installation Understanding Windows Benefits Design Considerations Measuring Performance Performance Standards

  4. VT Designated Downtown Boundary

    Data.gov (United States)

    Vermont Center for Geographic Information — Downtown designation provides communities with financial incentives, training and technical assistance to support local efforts to restore historic buildings,...

  5. Social capital and trust in providers.

    Science.gov (United States)

    Ahern, Melissa M; Hendryx, Michael S

    2003-10-01

    Trust in providers has been in decline in recent decades. This study attempts to identify sources of trust in characteristics of health care systems and the wider community. The design is cross-sectional. Data are from (1) the 1996 Household Survey of the Community Tracking Study, drawn from 24 Metropolitan Statistical Areas; (2) a 1996 multi-city broadcast media marketing database including key social capital indicators; (3) Interstudy; (4) the American Hospital Association; and (5) the American Medical Association. Independent variables include individual socio-demographic variables, HMO enrollment, community-level health sector variables, and social capital. The dependent variable is self-reported trust in physicians. Data are merged from the various sources and analyzed using SUDAAN. Subjects include adults in the Household Survey who responded to the items on trust in physicians (N=17,653). Trust in physicians is independently predicted by community social capital (pSocial capital plays a role in how health care is perceived by citizens, and how health care is delivered by providers. Efforts to build trust and collaboration in a community may improve trust in physicians, health care quality, access, and preserve local health care control.

  6. Systems engineering agile design methodologies

    CERN Document Server

    Crowder, James A

    2013-01-01

    This book examines the paradigm of the engineering design process. The authors discuss agile systems and engineering design. The book captures the entire design process (functionbases), context, and requirements to affect real reuse. It provides a methodology for an engineering design process foundation for modern and future systems design. This book captures design patterns with context for actual Systems Engineering Design Reuse and contains a new paradigm in Design Knowledge Management.

  7. Integrated circuit design using design automation

    International Nuclear Information System (INIS)

    Gwyn, C.W.

    1976-09-01

    Although the use of computer aids to develop integrated circuits is relatively new at Sandia, the program has been very successful. The results have verified the utility of the in-house CAD design capability. Custom IC's have been developed in much shorter times than available through semiconductor device manufacturers. In addition, security problems were minimized and a saving was realized in circuit cost. The custom CMOS IC's were designed at less than half the cost of designing with conventional techniques. In addition to the computer aided design, the prototype fabrication and testing capability provided by the semiconductor development laboratory and microelectronics computer network allows the circuits to be fabricated and evaluated before the designs are transferred to the commercial semiconductor manufacturers for production. The Sandia design and prototype fabrication facilities provide the capability of complete custom integrated circuit development entirely within the ERDA laboratories

  8. Urban Growth Areas, Priority Funding Area (PFA) - Vector Database. PFAs are geographic growth areas defined under State law and designated by local jurisdictions to provide a map for targeting State investment in infrastructure., Published in 1998, 1:24000 (1in=2000ft) scale, Maryland Department of Planning.

    Data.gov (United States)

    NSGIC State | GIS Inventory — Urban Growth Areas dataset current as of 1998. Priority Funding Area (PFA) - Vector Database. PFAs are geographic growth areas defined under State law and designated...

  9. Designing for Interaction Proxemics

    DEFF Research Database (Denmark)

    Grønbæk, Jens Emil

    2018-01-01

    Design of interactive technology provides opportunities as well as constraints in how a group of users can organize in a shared space. The core argument of interaction proxemics is to consider this in designing for collaboration. In my thesis, I focus on conceptualizing design of ubicomp...

  10. Standardizing communication from acute care providers to primary care providers on critically ill adults.

    Science.gov (United States)

    Ellis, Kerri A; Connolly, Ann; Hosseinnezhad, Alireza; Lilly, Craig M

    2015-11-01

    To increase the frequency of communication of patient information between acute and primary care providers. A secondary objective was to determine whether higher rates of communication were associated with lower rates of hospital readmission 30 days after discharge. A validated instrument was used for telephone surveys before and after an intervention designed to increase the frequency of communication among acute care and primary care providers. The communication intervention was implemented in 3 adult intensive care units from 2 campuses of an academic medical center. The frequency of communication among acute care and primary care providers, the perceived usefulness of the intervention, and its association with 30-day readmission rates were assessed for 202 adult intensive care episodes before and 100 episodes after a communication intervention. The frequency of documented communication increased significantly (5/202 or 2% before to 72/100 or 72% after the intervention; P communication was considered useful by every participating primary care provider. Rates of rehospitalization at 30 days were lower for the intervention group than the preintervention group, but the difference was not statistically significant (41/202 or 23% vs 16/88 or 18% of discharged patients; P = .45; power 0.112 at P = .05). The frequency of communication episodes that provide value can be increased through standardized processes. The key aspects of this effective intervention were setting the expectation that communication should occur, documenting when communication has occurred, and reviewing that documentation during multiprofessional rounds. ©2015 American Association of Critical-Care Nurses.

  11. Maintainability design guide

    International Nuclear Information System (INIS)

    Pack, R.W.

    1985-01-01

    The Human Factors Design Guide for Maintainability provides guidance for systematically incorporating good human factors techniques into the design of power plants. The guide describes a means of developing a comprehensive program plan to ensure compliance with the human factors approaches specified by the utility. The guide also provides specific recommendations for design practices, with examples, bases, and references. The recommendations are formatted for easy use by nuclear power plant design teams and by utility personnel involved in specification and design review. The guide was developed under EPRI research project RP2166-4 and is currently being published

  12. The effect of narrow provider networks on health care use.

    Science.gov (United States)

    Atwood, Alicia; Lo Sasso, Anthony T

    2016-12-01

    Network design is an often overlooked aspect of health insurance contracts. Recent policy factors have resulted in narrower provider networks. We provide plausibly causal evidence on the effect of narrow network plans offered by a large national health insurance carrier in a major metropolitan market. Our econometric design exploits the fact that some firms offer a narrow network plan to their employees and some do not. Our results show that narrow network health plans lead to reductions in health care utilization and spending. We find evidence that narrow networks save money by selecting lower cost providers into the network. Copyright © 2016 Elsevier B.V. All rights reserved.

  13. Designing For Democracy

    DEFF Research Database (Denmark)

    Knutz, Eva; Markussen, Thomas; Mårbjerg Thomsen, Signe

    2014-01-01

    there are already a number of approaches available which in one way or the other address the relationship between design, democracy and power. We provide an account of participatory design, adversarial design and design activism thereby pointing towards design?s potential for re-distributing power and authority......n this paper we focus on ?patient-democracy? and ?shared decision-making? seen from the perspective of design practice and design research. In the research on democracy in healthcare it is rarely questioned what forms of democracy underlies these concepts. We have examined three different theories...... of democracy and the democratic practices that belong to each of these. For designers working to increase patient democracy it is of vital importance to be able to distinguish different structures underlying democratic practices and to work out methods for prototyping democracy. In design research...

  14. Design, Research, and Design Research: Synergies and Contradictions

    Science.gov (United States)

    Nelson, Wayne A.

    2013-01-01

    Notions of design, research, and design research in the field of educational technology are quite different from conceptualizations held by other design fields. Examining the ways that research is conducted and used in educational technology in comparison to other design fields can provide novel insights into how research and design practice can…

  15. Introduction to combinatorial designs

    CERN Document Server

    Wallis, WD

    2007-01-01

    Combinatorial theory is one of the fastest growing areas of modern mathematics. Focusing on a major part of this subject, Introduction to Combinatorial Designs, Second Edition provides a solid foundation in the classical areas of design theory as well as in more contemporary designs based on applications in a variety of fields. After an overview of basic concepts, the text introduces balanced designs and finite geometries. The author then delves into balanced incomplete block designs, covering difference methods, residual and derived designs, and resolvability. Following a chapter on the e

  16. REDOing Design Education

    DEFF Research Database (Denmark)

    Morelli, Nicola; Götzen, Amalia De

    2017-01-01

    that are being developed in design education and research. The value in use, the infrastructuring and the governance levels are explained with the specific tools and approaches required according to the specific aim of the design activity: that is, whether it is about understanding, transforming or communicating......Service design education is still young and it is still interpreted in many different ways, according to the design programs where it usually plays a minor role. Very few education schemes provide a complete curriculum on service design, facing the challenge of equipping a designer who will want...

  17. Microwave circulator design

    CERN Document Server

    Linkhart, Douglas K

    2014-01-01

    Circulator design has advanced significantly since the first edition of this book was published 25 years ago. The objective of this second edition is to present theory, information, and design procedures that will enable microwave engineers and technicians to design and build circulators successfully. This resource contains a discussion of the various units used in the circulator design computations, as well as covers the theory of operation. This book presents numerous applications, giving microwave engineers new ideas about how to solve problems using circulators. Design examples are provided, which demonstrate how to apply the information to real-world design tasks.

  18. PROVIDING R-TREE SUPPORT FOR MONGODB

    Directory of Open Access Journals (Sweden)

    L. Xiang

    2016-06-01

    Full Text Available Supporting large amounts of spatial data is a significant characteristic of modern databases. However, unlike some mature relational databases, such as Oracle and PostgreSQL, most of current burgeoning NoSQL databases are not well designed for storing geospatial data, which is becoming increasingly important in various fields. In this paper, we propose a novel method to provide R-tree index, as well as corresponding spatial range query and nearest neighbour query functions, for MongoDB, one of the most prevalent NoSQL databases. First, after in-depth analysis of MongoDB’s features, we devise an efficient tabular document structure which flattens R-tree index into MongoDB collections. Further, relevant mechanisms of R-tree operations are issued, and then we discuss in detail how to integrate R-tree into MongoDB. Finally, we present the experimental results which show that our proposed method out-performs the built-in spatial index of MongoDB. Our research will greatly facilitate big data management issues with MongoDB in a variety of geospatial information applications.

  19. Providing R-Tree Support for Mongodb

    Science.gov (United States)

    Xiang, Longgang; Shao, Xiaotian; Wang, Dehao

    2016-06-01

    Supporting large amounts of spatial data is a significant characteristic of modern databases. However, unlike some mature relational databases, such as Oracle and PostgreSQL, most of current burgeoning NoSQL databases are not well designed for storing geospatial data, which is becoming increasingly important in various fields. In this paper, we propose a novel method to provide R-tree index, as well as corresponding spatial range query and nearest neighbour query functions, for MongoDB, one of the most prevalent NoSQL databases. First, after in-depth analysis of MongoDB's features, we devise an efficient tabular document structure which flattens R-tree index into MongoDB collections. Further, relevant mechanisms of R-tree operations are issued, and then we discuss in detail how to integrate R-tree into MongoDB. Finally, we present the experimental results which show that our proposed method out-performs the built-in spatial index of MongoDB. Our research will greatly facilitate big data management issues with MongoDB in a variety of geospatial information applications.

  20. Providing primary standard calibrations beyond 20 MHz

    International Nuclear Information System (INIS)

    Bickley, C J; Zeqiri, B; Robinson, S P

    2004-01-01

    The number of applications of medical ultrasound utilising frequencies in excess of 20 MHz has shown a consistent increase over recent years. Coupled with the commercial availability of wide-bandwidth hydrophones whose response extends beyond 40 MHz, this has driven a growing need to develop hydrophone calibration techniques at elevated frequencies. The current National Physical Laboratory primary standard method of calibrating hydrophones is based on an optical interferometer. This has been in operation for around 20 years and provides traceability over the frequency range of 0.3 to 20 MHz. More recently, calibrations carried out using the interferometer have been extended to 60 MHz, although the uncertainties associated with these calibrations are poor, being in excess of ±20% at high frequencies. Major contributions to the degraded calibration uncertainties arise from poor signal-to-noise at higher frequencies, the frequency response of the photodiodes used and the noise floor of the instrument. To improve the uncertainty of hydrophone calibrations above 20 MHz, it has been necessary to build and commission a new interferometer. Important features of the new primary standard are its use of a higher power laser to improve the signal-to-noise ratio, along with photodiodes whose greater bandwidth to improve the overall frequency response. This paper describes the design of key aspects of the new interferometer. It also presents some initial results of the performance assessment, including a detailed comparison of calibrations of NPL reference membrane hydrophones, undertaken using old and new interferometers for calibration up to 40 MHz

  1. Waste gas could provide power for ships

    Energy Technology Data Exchange (ETDEWEB)

    1970-07-18

    Dual-fuel engines are not new, but a version has been produced which, when used on ships carrying liquefied natural gas (LNG) could operate almost completely on waste gas. In its gas-operating mode, an engine can use the waste gas boiled off an LNG cargo. This wastage, normally allowed to escape to atmosphere, is about 0.25% of the cargo per day. Calculations have shown that this is enough to provide almost all the propulsion needs of a tanker under full cargo. This design is important in that it is suitable for the larger vessels now being required to carry LNG from N. Africa to North America, a journey where the costs of fuel are very considerable. Tests on the engine have indicated that power output is reduced to something like 80% of power under diesel fuel. However, additional advantages, such as cleaner engines with reduced maintenance costs, will help to tip the economic balance even further in favor of the dual purpose unit. This system also is applicable to stationary generating plant, again particularly on LNG tankage units where the same degree of gas boil-off applies.

  2. DOE handbook: Design considerations

    International Nuclear Information System (INIS)

    1999-04-01

    The Design Considerations Handbook includes information and suggestions for the design of systems typical to nuclear facilities, information specific to various types of special facilities, and information useful to various design disciplines. The handbook is presented in two parts. Part 1, which addresses design considerations, includes two sections. The first addresses the design of systems typically used in nuclear facilities to control radiation or radioactive materials. Specifically, this part addresses the design of confinement systems and radiation protection and effluent monitoring systems. The second section of Part 1 addresses the design of special facilities (i.e., specific types of nonreactor nuclear facilities). The specific design considerations provided in this section were developed from review of DOE 6430.1A and are supplemented with specific suggestions and considerations from designers with experience designing and operating such facilities. Part 2 of the Design Considerations Handbook describes good practices and design principles that should be considered in specific design disciplines, such as mechanical systems and electrical systems. These good practices are based on specific experiences in the design of nuclear facilities by design engineers with related experience. This part of the Design Considerations Handbook contains five sections, each of which applies to a particular engineering discipline

  3. DOE handbook: Design considerations

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-04-01

    The Design Considerations Handbook includes information and suggestions for the design of systems typical to nuclear facilities, information specific to various types of special facilities, and information useful to various design disciplines. The handbook is presented in two parts. Part 1, which addresses design considerations, includes two sections. The first addresses the design of systems typically used in nuclear facilities to control radiation or radioactive materials. Specifically, this part addresses the design of confinement systems and radiation protection and effluent monitoring systems. The second section of Part 1 addresses the design of special facilities (i.e., specific types of nonreactor nuclear facilities). The specific design considerations provided in this section were developed from review of DOE 6430.1A and are supplemented with specific suggestions and considerations from designers with experience designing and operating such facilities. Part 2 of the Design Considerations Handbook describes good practices and design principles that should be considered in specific design disciplines, such as mechanical systems and electrical systems. These good practices are based on specific experiences in the design of nuclear facilities by design engineers with related experience. This part of the Design Considerations Handbook contains five sections, each of which applies to a particular engineering discipline.

  4. Design Anthropology in Participatory Design

    DEFF Research Database (Denmark)

    Smith, Rachel Charlotte; Kjærsgaard, Mette Gislev

    2015-01-01

    This focus section explores the opportunities of design anthropology in participatory design as an approach to research and design in an increasingly global and digital world. Traditionally, ethnography has been used in Participatory design to research real-life contexts and challenges, and as ways...... opportunities of using design anthropology as a holistic and critical approach to addressing societal challenges and change, and a way for anthropologists and designers to engage in participatory research and design that extend beyond the empirical....

  5. Insure Kids Now (IKN) (Dental Care Providers)

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Insure Kids Now (IKN) Dental Care Providers in Your State locator provides profile information for oral health providers participating in Medicaid and Children's...

  6. The APT program plan: Providing an assured tritium production capability

    International Nuclear Information System (INIS)

    Lisowski, P.W.; Anderson, J.L.; Bishop, W.P.; Boggs, B.; Hall, K.

    1996-01-01

    Tritium is a radioactive hydrogen isotope used in all U.S. nuclear weapons. Because the half-life of tritium is short, 12.3 yr, it must be periodically replenished. To provide a new source, the U.S. Department of Energy (DOE) is sponsoring conceptual design and engineering development and demonstration activities for a plant that will use a high-power proton linear accelerator to produce tritium and will go on-line no later than 2007. The APT project is in the process of completing the conceptual design for a tritium production plant. In addition, there are several important areas under engineering development and demonstration that will ensure an efficient, cost-effective plant design and provide an adequate margin of tritium production. Information provided from this work will be used by the DOE in its 1998 choice of production technology implementation

  7. Pipe drafting and design

    CERN Document Server

    Parisher, Roy A; Parisher

    2000-01-01

    Pipe designers and drafters provide thousands of piping drawings used in the layout of industrial and other facilities. The layouts must comply with safety codes, government standards, client specifications, budget, and start-up date. Pipe Drafting and Design, Second Edition provides step-by-step instructions to walk pipe designers and drafters and students in Engineering Design Graphics and Engineering Technology through the creation of piping arrangement and isometric drawings using symbols for fittings, flanges, valves, and mechanical equipment. The book is appropriate primarily for pipe

  8. Design Anthropology in Participatory Design

    DEFF Research Database (Denmark)

    Smith, Rachel Charlotte; Gislev Kjærsgaard, Mette

    2014-01-01

    In this workshop we explore the opportunities of ethnography and design anthropology in Participatory Design (PD) as an approach to design in an increasingly global and digital world. Traditionally, ethnography has been used in PD to research real-life contexts and challenges, and as ways...... opportunities of using design anthropology as a holistic and critical approach to societal challenges, and a way for anthropologists and designers to engage in design that extends beyond the empirical....

  9. Evidensbaseret design

    DEFF Research Database (Denmark)

    Pagh, Jesper

    2013-01-01

    Debatindlæg om evidensbaseret design, som argumenterer for at det dels er en gammeldags, modernistisk tilgang til design, dels ikke baserer sig på evidens.......Debatindlæg om evidensbaseret design, som argumenterer for at det dels er en gammeldags, modernistisk tilgang til design, dels ikke baserer sig på evidens....

  10. FPGA design

    CERN Document Server

    Simpson, Philip

    2010-01-01

    This book describes best practices for successful FPGA design. It is the result of the author's meetings with hundreds of customers on the challenges facing each of their FPGA design teams. By gaining an understanding into their design environments, processes, what works and what does not work, key areas of concern in implementing system designs have been identified and a recommended design methodology to overcome these challenges has been developed. This book's content has a strong focus on design teams that are spread across sites. The goal being to increase the productivity of FPGA design t

  11. Design Games

    DEFF Research Database (Denmark)

    Johansson, Martin Wetterstrand

    2007-01-01

    In this paper design games are discussed as an approach to managing design sessions. The focus is on the collaborative design session and more particular on how to set up the collaboration and reinsure progress. Design games have the advantage of framing the collaborative assignment at hand....... Experiments can be set up to explore possible futures and design games has the qualities of elegantly focus the work at the same time as it lessens the burden for the process facilitator. The present paper goes into detail about how design games can be set up to facilitate collaboration and how the design...

  12. Design What?%

    DEFF Research Database (Denmark)

    Engholm, Ida

    2017-01-01

    processes, which require specific development methods across a wide range of disciplines, from industrial design over graphic communication to service and digital design and strategic corporate development. The book addresses both established methods and recent research in design processes at leading design...... idea to the end-result. The goal for this graphic non-fiction project is to document and present both historical and current developments in design methodology, from the early attempts at documenting procedures for design process management at the Bauhaus School in the 1920s to contemporary design...

  13. Radiological design guide

    International Nuclear Information System (INIS)

    Evans, R.A.

    1994-01-01

    The purpose of this design guide is to provide radiological safety requirements, standards, and information necessary for designing facilities that will operate without unacceptable risk to personnel, the public, or the environment as required by the US Department of Energy (DOE). This design guide, together with WHC-CM-4-29, Nuclear Criticality Safety, WHC-CM-4-46, Nonreactor Facility Safety Analysis, and WHC-CM-7-5, Environmental Compliance, covers the radiation safety design requirements at Westinghouse Hanford Company (WHC). This design guide applies to the design of all new facilities. The WHC organization with line responsibility for design shall determine to what extent this design guide shall apply to the modifications to existing facilities. In making this determination, consideration shall include a cost versus benefit study. Specifically, facilities that store, handle, or process radioactive materials will be covered. This design guide replaces WHC-CM-4-9 and is designated a living document. This design guide is intended for design purposes only. Design criteria are different from operational criteria and often more stringent. Criteria that might be acceptable for operations might not be adequate for design

  14. VLSI design

    CERN Document Server

    Basu, D K

    2014-01-01

    Very Large Scale Integrated Circuits (VLSI) design has moved from costly curiosity to an everyday necessity, especially with the proliferated applications of embedded computing devices in communications, entertainment and household gadgets. As a result, more and more knowledge on various aspects of VLSI design technologies is becoming a necessity for the engineering/technology students of various disciplines. With this goal in mind the course material of this book has been designed to cover the various fundamental aspects of VLSI design, like Categorization and comparison between various technologies used for VLSI design Basic fabrication processes involved in VLSI design Design of MOS, CMOS and Bi CMOS circuits used in VLSI Structured design of VLSI Introduction to VHDL for VLSI design Automated design for placement and routing of VLSI systems VLSI testing and testability The various topics of the book have been discussed lucidly with analysis, when required, examples, figures and adequate analytical and the...

  15. Design Accountability

    DEFF Research Database (Denmark)

    Koskinen, Ilpo; Krogh, Peter

    2015-01-01

    When design research builds on design practice, it may contribute to both theory and practice of design in ways richer than research that treats design as a topic. Such research, however, faces several tensions that it has to negotiate successfully in order not to lose its character as research....... This paper looks at constructive design research which takes the entanglement of theory and practice as its hallmark, and uses it as a test case in exploring how design researchers can work with theory, methodology, and practice without losing their identity as design researchers. The crux of practice based...... design research is that where classical research is interested in singling out a particular aspect and exploring it in depth, design practice is characterized by balancing numerous concerns in a heterogenous and occasionally paradoxical product. It is on this basis the notion of design accountability...

  16. Recommendations for providing protection during the transport of uranium hexafluoride

    International Nuclear Information System (INIS)

    1987-06-01

    In July 1986 a group of consultants was convened by the IAEA to provide initial guidance on the transport of UF 6 and the regulations for it considering the hazards posed by this material. A Technical Committee meeting was held in November 1986 to finalize the development of the recommendations for providing protection during the transport of UF 6 . This report provides the recommendations resulting from the meetings of these experts. The IAEA recommends that national competent authorities and other relevant national regulatory and standards-related organizations, and appropriate international organizations seriously consider all of the information provided in this report especially the additional requirements set forth in Section III.3 concerning design, manufacturing and testing requirements, design approval requirements, requirements on loading for transport, and requirements for quality assurance and maintenance. This report also deals with United Nations' Recommendations of the Transport of Dangerous Goods, International Modal Regulatory Documents, ANSIN14.1-1982 and ISO/DIS/7195 Standards

  17. Athena: Providing Insight into the History of the Universe

    Science.gov (United States)

    Murphy, Gloria A.

    2010-01-01

    The American Institute for Aeronautics and Astronautics has provided a Request for Proposal which calls for a manned mission to a Near-Earth Object. It is the goal of Team COLBERT to respond to their request by providing a reusable system that can be implemented as a solid stepping stone for future manned trips to Mars and beyond. Despite Team COLBERT consisting of only students in Aerospace Engineering, in order to achieve this feat, the team must employ the use of Systems Engineering. Tools and processes from Systems Engineering will provide quantitative and semi-quantitative tools for making design decisions and evaluating items such as budgets and schedules. This paper will provide an in-depth look at some of the Systems Engineering processes employed and will step through the design process of a Human Asteroid Exploration System.

  18. Mechanical design

    CERN Document Server

    Risitano, Antonino

    2011-01-01

    METHODOLOGICAL STATEMENT OF ENGINEERING DESIGNApproaches to product design and developmentMechanical design and environmental requirementsPROPERTIES OF ENGINEERING MATERIALSMaterials for mechanical designCharacterization of metalsStress conditionsFatigue of materialsOptimum material selection in mechanical designDESIGN OF MECHANICAL COMPONENTS AND SYSTEMSFailure theoriesHertz theoryLubrificationShafts and bearingsSplines and keysSpringsFlexible machine elementsSpur gearsPress and shrink fitsPressure tubesCouplingsClutchesBrakes

  19. Algebraic design theory

    CERN Document Server

    Launey, Warwick De

    2011-01-01

    Combinatorial design theory is a source of simply stated, concrete, yet difficult discrete problems, with the Hadamard conjecture being a prime example. It has become clear that many of these problems are essentially algebraic in nature. This book provides a unified vision of the algebraic themes which have developed so far in design theory. These include the applications in design theory of matrix algebra, the automorphism group and its regular subgroups, the composition of smaller designs to make larger designs, and the connection between designs with regular group actions and solutions to group ring equations. Everything is explained at an elementary level in terms of orthogonality sets and pairwise combinatorial designs--new and simple combinatorial notions which cover many of the commonly studied designs. Particular attention is paid to how the main themes apply in the important new context of cocyclic development. Indeed, this book contains a comprehensive account of cocyclic Hadamard matrices. The book...

  20. Participatory Design with Dyslectics

    DEFF Research Database (Denmark)

    Vangeli, Panagiota; Stage, Jan

    2017-01-01

    Participatory Design has been used successfully in many projects but the question is how participatory design works with people with a cognitive disorder like dyslexia. In this study, we analyzed observations of participatory design sessions with dyslectic participants for developing designs...... of a reading software application by applying two participatory design methods: the IDEAS and CI methods. Furthermore, we conducted online surveys to gather information on dyslectics participants’ and their special-education teachers’ opinion regarding the participatory design process, methods and final...... designs. The results indicate that participatory design works effectively with dyslectic people provided the participation of Proxy Users to represent dyslectics, when it is necessary, the participation of an experienced on dyslexia facilitator who has the knowledge to address incidents caused due...

  1. Designing an Educational Game

    DEFF Research Database (Denmark)

    Bjørner, Thomas; Hansen, Charina Benedikte Søgaard

    2010-01-01

    When designing games with learning purposes used in a classroom, there often occur problems about the lack of learning content or the lack of game contents. Other disadvantages of existing educational games are the difficulty to provide a continual balance between the challenge and the pupils......’ skill to control and solve the given task. In this paper we suggest three different perspectives that need to be communicated across in order to design a useful educational game: teachers, pupils and game designers. It is our intention with this paper to suggest some design principles for educational...... games, and to integrate teachers, pupils and game designers needs and requirements. To set up these design principles for educational games we have used a holistic perspective. This means that the design principles must be seen in coherence within the social and physical environment. The design...

  2. Method card design dimensions

    DEFF Research Database (Denmark)

    Wölfel, Christiane; Merritt, T.

    2013-01-01

    There are many examples of cards used to assist or provide structure to the design process, yet there has not been a thorough articulation of the strengths and weaknesses of the various examples. We review eighteen card-based design tools in order to understand how they might benefit designers....... The card-based tools are explained in terms of five design dimensions including the intended purpose and scope of use, duration of use, methodology, customization, and formal/material qualities. Our analysis suggests three design patterns or archetypes for existing card-based design method tools...... and highlights unexplored areas in the design space. The paper concludes with recommendations for the future development of card-based methods for the field of interaction design....

  3. Randomized, Controlled Trial of CBT Training for PTSD Providers

    Science.gov (United States)

    2016-10-01

    implement and evaluate a cost effective, web based self-paced training program to provide skills- oriented continuing education for mental health...Product Aim(s) The purpose of this study is to design, implement and evaluate a web based training program providing skills- oriented continuing education ...Rates and Data Quality i. The team collaborated with the VHA NCPTSD to monitor the collection rates and data quality on a weekly basis . b. Create Interim

  4. Quantifying the Lateral Bracing Provided by Standing Steam Roof Systems

    OpenAIRE

    Sorensen, Taylor J.

    2016-01-01

    One of the major challenges of engineering is finding the proper balance between economical and safe. Currently engineers at Nucor Corporation have ignored the additional lateral bracing provided by standing seam roofing systems to joists because of the lack of methods available to quantify the amount of bracing provided. Based on the results of testing performed herein, this bracing is significant, potentially resulting in excessively conservative designs and unnecessary costs. This proje...

  5. Provider attributes correlation analysis to their referral frequency and awards.

    Science.gov (United States)

    Wiley, Matthew T; Rivas, Ryan L; Hristidis, Vagelis

    2016-03-14

    There has been a recent growth in health provider search portals, where patients specify filters-such as specialty or insurance-and providers are ranked by patient ratings or other attributes. Previous work has identified attributes associated with a provider's quality through user surveys. Other work supports that intuitive quality-indicating attributes are associated with a provider's quality. We adopt a data-driven approach to study how quality indicators of providers are associated with a rich set of attributes including medical school, graduation year, procedures, fellowships, patient reviews, location, and technology usage. In this work, we only consider providers as individuals (e.g., general practitioners) and not organizations (e.g., hospitals). As quality indicators, we consider the referral frequency of a provider and a peer-nominated quality designation. We combined data from the Centers for Medicare and Medicaid Services (CMS) and several provider rating web sites to perform our analysis. Our data-driven analysis identified several attributes that correlate with and discriminate against referral volume and peer-nominated awards. In particular, our results consistently demonstrate that these attributes vary by locality and that the frequency of an attribute is more important than its value (e.g., the number of patient reviews or hospital affiliations are more important than the average review rating or the ranking of the hospital affiliations, respectively). We demonstrate that it is possible to build accurate classifiers for referral frequency and quality designation, with accuracies over 85 %. Our findings show that a one-size-fits-all approach to ranking providers is inadequate and that provider search portals should calibrate their ranking function based on location and specialty. Further, traditional filters of provider search portals should be reconsidered, and patients should be aware of existing pitfalls with these filters and educated on local

  6. Memory design

    DEFF Research Database (Denmark)

    Tanderup, Sisse

    by cultural forms, often specifically by the concept of memory in philosophy, sociology and psychology, while Danish design traditionally has been focusing on form and function with frequent references to the forms of nature. Alessi's motivation for investigating the concept of memory is that it adds......Mind and Matter - Nordik 2009 Conference for Art Historians Design Matters Contributed Memory design BACKGROUND My research concerns the use of memory categories in the designs by the companies Alessi and Georg Jensen. When Alessi's designers create their products, they are usually inspired...... a cultural dimension to the design objects, enabling the objects to make an identity-forming impact. Whether or not the concept of memory plays a significant role in Danish design has not yet been elucidated fully. TERMINOLOGY The concept of "memory design" refers to the idea that design carries...

  7. Business design or Creative design

    DEFF Research Database (Denmark)

    Sørensen, Suna; Lassen, Astrid Heidemann; Nielsen, Louise Møller

    2008-01-01

    Business design is about turning good ideas into future business, but it requires a great entrepreneurial opportunity to be exploited via a valid strategic and organizational design. The literature says much about how entrepreneurs design strategies and organizations, but how do they design...

  8. Providing nuclear pharmacy education via the internet

    International Nuclear Information System (INIS)

    Hilliard, N.L.; Pickett, M.; Thaxton, P.; Norenberg, J.P.; Wittstrom, K.; Rhodes, B.

    2002-01-01

    Aim: (1) Increase the nuclear pharmacy education opportunities across the United States and the around the world. (2) Establish collaborative educational agreements between colleges of pharmacy and local nuclear pharmacy preceptors. (3) Decrease the shortage of radio pharmacists. 4) Provide nuclear education courses to supplement existing educational programs. Materials and Methods: Nuclear Education Online (www.nuclearonline.org) is an educational consortium between the University of Arkansas for Medical Sciences and the University of New Mexico. The faculty members from each institution have collaborated to design an online didactic curriculum and experiential training materials. The didactic portion is delivered via WebCT (www.webct.com) and involves interactive studies with faculty from UNM and UAMS. The student-centered curriculum is based on the APhA Syllabus for Nuclear Pharmacy Training and includes interactive web-based course materials, discussion groups, preceptor-led activities and problem-based learning (PBL) case studies based upon actual clinical studies and real-life pharmacy situations. Individual units of study include Nuclear Physics, Radiation Biology, Radiation Safety, Instrumentation, and Radiochemistry/Radiopharmacology. Students can begin the program at anytime. Once a cohort of students is established, the students proceed through the PBL cases, working interactively as a group. Results: Since June 2001, over 26 students have completed the 10-week certificate program. These students have been located across the U.S. and in Saudi Arabia. Fifteen students have completed individual courses in nuclear physics and instrumentation through colleges of pharmacy course offerings using the NEO faculty as instructors. Student evaluations revealed that 78% of the students thought that the NEO program was a 'great way to learn' (highest rating). When comparing PBL to a traditional classroom setting, two thirds of students preferred problem

  9. Providing Data Access for Interdisciplinary Research

    Science.gov (United States)

    Hooper, R. P.; Couch, A.

    2012-12-01

    Developing an interdisciplinary understanding of human and environmental interactions with water requires access to a variety of data kinds collected by various organizations. The CUAHSI Hydrologic Information System (HIS) is a standards-based, services-oriented architecture designed for time-series data. Such data represents an important type of data in water studies. Through the efforts of HIS, a standard transmission language, WaterML2, has been adopted by the Open Geospatial Consortium and is under consideration by the World Meteorologic Organization as an international standards. Web services have also been developed to retrieve data and metadata. HIS is completed with a metadata catalog, hosted by San Diego Supercomputing Center, which indexes more than 20 million time series provided from over 90 different services. This catalog is supported through a hierarchically organized controlled vocabulary that is open for community input and mediation. Data publishers include federal agencies, universities, state agencies, and non-profit organizations such as watershed associations. Accessing data from such a broad spectrum of sources through a uniform service standard promises to truly transform the way in which hydrologic research is done. CUAHSI HIS is a large-scale prototype at this time, but a proposal is under consideration by the National Science Foundation to operationalize HIS through a data facility, tentatively called the CUAHSI Water Data Center. Establishing HIS is an important step to enable research into human-environment interactions with water, but it is only one step. Other data structures will need to be made accessible and interoperable to support this research. Some data—such as two-dimensional GIS coverages—already have widely used standards for transmission and sharing. The US Federal government has long operated a clearinghouse for federal geographic data that is now being augmented with other services such as ArcGIS OnLine. Other data

  10. Employability Skills of International Accounting Graduates: Internship Providers' Perspectives

    Science.gov (United States)

    Jackling, Beverley; Natoli, Riccardo

    2015-01-01

    Purpose: The purpose of this paper is to report on the perceptions of internship providers with respect to the employability skills of international accounting graduates that undertake a Professional Year Program (PYP) incorporating a 12-week (240 hour) internship. Design/methodology/approach: The study involved a survey of internship providers…

  11. Theory in Practice: Helping Providers Address Depression in Diabetes Care

    Science.gov (United States)

    Osborn, Chandra Y.; Kozak, Cindy; Wagner, Julie

    2010-01-01

    Introduction: A continuing education (CE) program based on the theory of planned behavior was designed to understand and improve health care providers' practice patterns in screening, assessing, and treating and/or referring patients with diabetes for depression treatment. Methods: Participants completed assessments of attitudes, confidence,…

  12. Quality Perception within Corporate E-Learning Providers in Catalonia

    Science.gov (United States)

    Sangra, Albert; Fernandez-Michels, Pedro

    2011-01-01

    Purpose: The paper seeks to describe the Catalan corporate e-learning providers from the perspective of quality perception, quality assessment and quality control. Design/methodology/approach: A literature review reveals key aspects of the definition of quality in e-learning. The results of the review constitute the basis for exploratory research…

  13. Instructor-Provided Summary Infographics to Support Online Learning

    Science.gov (United States)

    Elena Gallagher, Silvia; O'Dulain, Mairtin; O'Mahony, Niamh; Kehoe, Claire; McCarthy, Fintan; Morgan, Gerard

    2017-01-01

    Infographics are a visualisation tool that can be used to improve retention, comprehension and appeal of complex concepts. The rise of infographic use in education has facilitated new forms of application and design of these tools. Instructor-provided summary infographics are a new form of infographic, whereby key learning objectives and content…

  14. Discussing Diabetes with Your Healthcare Provider

    Science.gov (United States)

    ... of this page please turn Javascript on. Feature: Diabetes Discussing Diabetes with Your Healthcare Provider Past Issues / Fall 2009 Table of Contents Diabetes Medicines—Always Discuss Them with Your Healthcare Provider ...

  15. Identifiable Data Files - Medicare Provider Analysis and ...

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Medicare Provider Analysis and Review (MEDPAR) File contains data from claims for services provided to beneficiaries admitted to Medicare certified inpatient...

  16. Institutional Provider and Beneficiary Summary PUF

    Data.gov (United States)

    U.S. Department of Health & Human Services — The CMS IPBS PUFs are aggregated files in which each record summarizes information for a particular institutional provider. An institutional provider refers to a...

  17. Medicare Provider Payment Data - Skilled Nursing Facilities

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Skilled Nursing Facility Utilization and Payment Public Use File (Skilled Nursing Facility PUF) provides information on services provided to Medicare...

  18. Medicare Provider Data - Part D Prescriber

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Part D Prescriber Public Use File (PUF) provides information on prescription drugs prescribed by individual physicians and other health care providers and paid...

  19. Factors Influencing Self Employment Media Service Providers ...

    African Journals Online (AJOL)

    Factors Influencing Self Employment Media Service Providers among Tertiary ... role stereotype and common business practices on media self employment in ... Sex, Psycho-social Characteristics, self Employment, Providing Media Services.

  20. Medicare Provider Data - Physician and Other Supplier

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Physician and Other Supplier Public Use File (Physician and Other Supplier PUF) provides information on services and procedures provided to Medicare...

  1. Customer satisfaction surveys: Methodological recommendations for financial service providers

    Directory of Open Access Journals (Sweden)

    Đorđić Marko

    2010-01-01

    Full Text Available This methodological article investigates practical challenges that emerge when conducting customer satisfaction surveys (CSS for financial service providers such as banks, insurance or leasing companies, and so forth. It displays methodological recommendations in reference with: (a survey design, (b sampling, (c survey method, (d questionnaire design, and (e data acquisition. Article provides appropriate explanations that usage of: two-stage survey design, SRS method, large samples, and rigorous fieldwork preparation can enhance the overall quality of CSS in financial services. Proposed methodological recommendations can primarily be applied to the primary quantitative marketing research in retail financial services. However, majority of them can be successfully applied when conducting primary quantitative marketing research in corporate financial services as well. .

  2. Simplified design of IC amplifiers

    CERN Document Server

    Lenk, John

    1996-01-01

    Simplified Design of IC Amplifiers has something for everyone involved in electronics. No matter what skill level, this book shows how to design and experiment with IC amplifiers. For experimenters, students, and serious hobbyists, this book provides sufficient information to design and build IC amplifier circuits from 'scratch'. For working engineers who design amplifier circuits or select IC amplifiers, the book provides a variety of circuit configurations to make designing easier.Provides basics for all phases of practical design.Covers the most popular forms for amplif

  3. Design and Analysis Facility

    Data.gov (United States)

    Federal Laboratory Consortium — Provides engineering design of aircraft components, subsystems and installations using Pro/E, Anvil 1000, CADKEY 97, AutoCAD 13. Engineering analysis tools include...

  4. Rock slope design guide.

    Science.gov (United States)

    2011-04-01

    This Manual is intended to provide guidance for the design of rock cut slopes, rockfall catchment, and : rockfall controls. Recommendations presented in this manual are based on research presented in Shakoor : and Admassu (2010) entitled Rock Slop...

  5. Designer biomaterials for mechanobiology

    Science.gov (United States)

    Li, Linqing; Eyckmans, Jeroen; Chen, Christopher S.

    2017-12-01

    Biomaterials engineered with specific bioactive ligands, tunable mechanical properties and complex architecture have emerged as powerful tools to probe cell sensing and response to physical properties of their material surroundings, and ultimately provide designer approaches to control cell function.

  6. Design of mechanical joints

    CERN Document Server

    Blake, Alexander

    2018-01-01

    A cornerstone publication that covers the basic principles and practical considerations of design methodology for joints held by rivets, bolts, weld seams, and adhesive materials, Design of Mechanical Joints gives engineers the practical results and formulas they need for the preliminary design of mechanical joints, combining the essential topics of joint mechanics...strength of materials...and fracture control to provide a complete treatment of problems pertinent to the field of mechanical connections.

  7. Co-providing: understanding the logistics.

    Science.gov (United States)

    Dickerson, Pamela S

    2011-11-01

    Continuing nursing education providers have sometimes said that they don't want to co-provide because "it's too much trouble" or they "won't be able to control what happens" or because they don't understand the process. This column clarifies the logistics of the co-provider relationship. Copyright 2011, SLACK Incorporated.

  8. Piezoelectric pump and pressurised circuit provided therewith

    NARCIS (Netherlands)

    Van Es, Johannes; Wits, Wessel Willems

    2015-01-01

    A piezoelectric pump for use in a pressurised circuit is provided, comprising a pump chamber (5) with an inlet (6) provided with a one way inlet valve (7), for connection to a feeding line (8) of the pressurised circuit and an outlet (9) provided with a one way outlet valve (10), for connection to a

  9. Provider-Independent Use of the Cloud

    Science.gov (United States)

    Harmer, Terence; Wright, Peter; Cunningham, Christina; Perrott, Ron

    Utility computing offers researchers and businesses the potential of significant cost-savings, making it possible for them to match the cost of their computing and storage to their demand for such resources. A utility compute provider enables the purchase of compute infrastructures on-demand; when a user requires computing resources a provider will provision a resource for them and charge them only for their period of use of that resource. There has been a significant growth in the number of cloud computing resource providers and each has a different resource usage model, application process and application programming interface (API)-developing generic multi-resource provider applications is thus difficult and time consuming. We have developed an abstraction layer that provides a single resource usage model, user authentication model and API for compute providers that enables cloud-provider neutral applications to be developed. In this paper we outline the issues in using external resource providers, give examples of using a number of the most popular cloud providers and provide examples of developing provider neutral applications. In addition, we discuss the development of the API to create a generic provisioning model based on a common architecture for cloud computing providers.

  10. 5 CFR 890.910 - Provider information.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Provider information. 890.910 Section 890.910 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT (CONTINUED) CIVIL SERVICE REGULATIONS..., and FEHB Benefit Payments § 890.910 Provider information. The hospital provider information used to...

  11. Typography of web design

    OpenAIRE

    Uhlířová, Martina

    2016-01-01

    Typography is one of the most important elements of web design and marketing. Good typography makes web design more appealing, which is important for readers in evaluating titles and the quality of text. The aim of this thesis is to provide a characterization of good and bad typography. I will use this characterization to identify modern typographical trends in a digital background....

  12. Design of timber groynes

    NARCIS (Netherlands)

    Perdok, U.; Crossman, M.; Verhagen, H.J.; Howard, S.; Simm, J.

    2003-01-01

    The performance and durability of timber groynes (or 'groins') is highly dependent on the design and detailing of the structure. Using knowledge and experience developed over generations an effective functional design can be achieved, which may ultimately result in lower whole life costs and provide

  13. Design for Visual Arts.

    Science.gov (United States)

    Skeries, Larry

    Experiences suggested within this visual arts packet provide high school students with awareness of visual expression in graphic design, product design, architecture, and crafts. The unit may be used in whole or in part and includes information about art careers and art-related jobs found in major occupational fields. Specific lesson topics…

  14. Future integrated design environments

    DEFF Research Database (Denmark)

    Christiansson, Per; Svidt, Kjeld; Sørensen, Kristian Birch

    2009-01-01

    and modeling of explicit and implicit end-user needs and requirements on both the building to be designed and the supporting design tools. The paper provides grounds to higher success rate in capture of explicit and implicit end user needs and requirements on functional performance in use and re...

  15. Designs and finite geometries

    CERN Document Server

    1996-01-01

    Designs and Finite Geometries brings together in one place important contributions and up-to-date research results in this important area of mathematics. Designs and Finite Geometries serves as an excellent reference, providing insight into some of the most important research issues in the field.

  16. DESIGNING GREENER SOLVENTS

    Science.gov (United States)

    Computer-aided design of chemicals and chemical mixtures provides a powerful tool to help engineers identify cleaner process designs and more-benign alternatives to toxic industrial solvents. Three software programs are discussed: (1) PARIS II (Program for Assisting the Replaceme...

  17. Design information verification

    International Nuclear Information System (INIS)

    Johnson, Shirley

    2001-01-01

    The paper provides the bases to complete a Design Information Questionnaire (DIQ) for a research reactor. The IAEA requirements for provision of design information for nuclear facility is described. The role of the provided information for the development of the safeguards approach and for planning of the IAEA's general inspection program for a specific facility is emphasized. Content and preparation of the IAEA DIQ by the State is presented

  18. Design Anthropology

    DEFF Research Database (Denmark)

    Gunn, Wendy

    Design anthropology is a call for a different way of involving anthropology and participatory observation within practices of designing technologies, services, policies and infrastructure that does not aim towards changing human behavior. Here design is considered the process and not the object...... of inquiry. The paper presents a short history of design anthropology, its theoretical underpinnings and methodologies. Theoretically, the emerging field is influenced by processual, critical and action orientated approaches in anthropology. I argue that by combining anthropological methodology and knowledge...... with the future orientated imaginative praxis of design skill and collaborative design processes, anthropology and design could learn from each other. I conclude by referring to what theories, methods, and approaches are in use by practitioners of design anthropology....

  19. Danish design

    DEFF Research Database (Denmark)

    Dickson, Thomas

    2001-01-01

    Hvordan dansk design bliver innovativt og verdensberømt igen som i storhedstiden i 1950- og 60'erne......Hvordan dansk design bliver innovativt og verdensberømt igen som i storhedstiden i 1950- og 60'erne...

  20. Designing motivation

    DEFF Research Database (Denmark)

    How can products be designed to change our habits for the better? What is some of the leading research that designers can draw on to create new systems that motivate people towards healthier behaviour? Designing Motivation is an edited collection of ‘industrialist cheat sheets’: 22 single......-page summaries of research articles relating to technology design, motivation, and behaviour change. Ranging across the fields of economics, sociology, design research and behavioural science, each summary draws out the design implications of the research. It is intended as a resource for designers who...... are grappling with how to create motivating products, and as a primer for students who want a brief introduction to some of the relevant theories, findings and design interventions in these fields. The editor's introduction raises a number of issues encountered when we try to apply behavioural research...

  1. Research Design

    DEFF Research Database (Denmark)

    2019-01-01

    Gunnar Scott Reinbacher (editor) Antology.  Research Design : Validation in Social Sciences. Gunnar Scott Reinbacher: Introduction. Research design and validity. 15p Ole Riis: Creative Research design. 16 p Lennart Nørreklit: Validity in Research Design. 24p Gitte Sommer Harrits: Praxeological...... Scott Reinbacher: Multidisciplinary Research Designs in Problem Based Research. The case of an european project on chronical diseases, the Tandem project (Training Alternmative Networking Skills in Diabetes Management). 15p Niels Nørgaard Kristensen: A qualitative bottom up approach to post modern...... knowledge: An integrated strategy for combining "explaining" and "understanding". 22p Heidi Houlberg Salomonsen & Viola Burau: Comparative research designs. 40p Rasmus Antoft & Heidi Houlberg Salomonsen: Studying organizations by a Pragmatic Research Design: the case of qualitative case study  designs. 31p...

  2. Repository design

    Energy Technology Data Exchange (ETDEWEB)

    John, C M

    1982-01-01

    Various technical issues of radioactive waste design are addressed in this paper. Two approaches to repository design considered herein are: (1) design to minimize the disturbance of the hot rock; and (2) designs that intentionally modify the hot rock to insure better containment of the wastes. The latter designs range from construction of a highly impermeable barrier around a spherical cavern to creating a matrix of tunnels and boreholes to form a cage within which the hydraulic pressure is nearly constant. Examples of these design alternatives are described in some detail. It is concluded that proposed designs for repositories illustrate that performance criteria considered acceptable for such facilities can be met by appropriate site selection and repository engineering. With these technically feasible design concepts, it is also felt that socioeconomic and institutional issues can be better resolved. (BLM)

  3. Breakwater design

    OpenAIRE

    Verhagen, H.J.; van den Bos, J.P.

    2017-01-01

    For this book we have deliberately chosen that the text should follow a more or less logical design procedure for breakwaters. It follows the required design steps from the system level down to the individual crosssection level, and in time from conceptual design to construction. This systematic approach starts at the functional description of breakwaters, system analysis including side-effects and derivation of boundary conditions and continues to the actual design, first of the main armour ...

  4. Design typology and design organisation

    DEFF Research Database (Denmark)

    Andreasen, Mogens Myrup; Wognum, N.; McAloone, Timothy Charles

    2002-01-01

    research society has recognised normative procedural models of designing as being a reasonable answer to the question: How do designing proceed? The reasoning behind the models, from which the design methodology model by [Pahl & Beitz 1995], may be seen as a characteristic one, was a mix of human problem......The idea of focusing upon the creation of a design typology was articulated by [Andreasen & Wognum 2000] and detailed by [Andreasen & Wognum 2001]. The aim was to propose a typology, which could serve as identification of design types and design research contributions. For a long period the design...... solving-, design management-, and artefact nature-reasoning. Critique has been raised to that type of models as being neither explanatory nor instructive. If we accept these models as merely being pragmatically "stepping-stone" explanations of what happens during designing, it is interesting to observe...

  5. Design Processes

    DEFF Research Database (Denmark)

    Ovesen, Nis

    2009-01-01

    Inspiration for most research and optimisations on design processes still seem to focus within the narrow field of the traditional design practise. The focus in this study turns to associated businesses of the design professions in order to learn from their development processes. Through interviews...... and emerging production methods....

  6. Radiopharmacy design

    International Nuclear Information System (INIS)

    Lazarus, C.R.

    1985-01-01

    The factors which should be considered when designing a radiopharmacy are examined. These include the levels and types of radioactivity and the functions, location, size and layout of the radiopharmacy. Aspects of the design process including environmental cleanliness in enclosed spaces and microbiological safety cabinets are also discussed. Finally the current publications available on recommendations and guidelines for radiopharmacy designs are briefly reviewed. (UK)

  7. Breakwater design

    NARCIS (Netherlands)

    Verhagen, H.J.; van den Bos, J.P.

    For this book we have deliberately chosen that the text should follow a more or less logical design procedure for breakwaters. It follows the required design steps from the system level down to the individual crosssection level, and in time from conceptual design to construction. This systematic

  8. Design Aspects

    International Nuclear Information System (INIS)

    Hillary, J.J.

    1974-01-01

    Summarizing part of a seminar on iodide filter testing the author classifies the design information on iodine filters which was presented at the meeting in terms of design requirements - species to be trapped sorption materials and engineering factors -, design evaluation, applications and operational experience

  9. Scandinavian Participatory Design

    DEFF Research Database (Denmark)

    Iversen, Ole Sejer; Smith, Rachel Charlotte

    2012-01-01

    As Scandinavian Participatory Design (PD) approach is a highly values-led design approach, and is gaining importance in IDC research, we discuss the underlying values of democracy, quality of work and emancipation of this approach. We present a case study, Digital Natives, in which the Scandinavian...... PD approach was put into practice. Here we involved seven teenagers in the design of an interactive museum exhibition. We discuss how this particular approach effects key design activities such as the establishment of the design space, power relations among participants, the dialogical design process......, project evaluation and the final outcome of the project. We conclude that the end goal of Scandinavian PD is not necessarily the final research prototype. Rather, in Scandinavian PD, designers strive to provide children with meaningful alternatives to existing technologies. It is to help children realize...

  10. Designing synthetic biology.

    Science.gov (United States)

    Agapakis, Christina M

    2014-03-21

    Synthetic biology is frequently defined as the application of engineering design principles to biology. Such principles are intended to streamline the practice of biological engineering, to shorten the time required to design, build, and test synthetic gene networks. This streamlining of iterative design cycles can facilitate the future construction of biological systems for a range of applications in the production of fuels, foods, materials, and medicines. The promise of these potential applications as well as the emphasis on design has prompted critical reflection on synthetic biology from design theorists and practicing designers from many fields, who can bring valuable perspectives to the discipline. While interdisciplinary connections between biologists and engineers have built synthetic biology via the science and the technology of biology, interdisciplinary collaboration with artists, designers, and social theorists can provide insight on the connections between technology and society. Such collaborations can open up new avenues and new principles for research and design, as well as shed new light on the challenging context-dependence-both biological and social-that face living technologies at many scales. This review is inspired by the session titled "Design and Synthetic Biology: Connecting People and Technology" at Synthetic Biology 6.0 and covers a range of literature on design practice in synthetic biology and beyond. Critical engagement with how design is used to shape the discipline opens up new possibilities for how we might design the future of synthetic biology.

  11. Designer's unified cost model

    Science.gov (United States)

    Freeman, William T.; Ilcewicz, L. B.; Swanson, G. D.; Gutowski, T.

    1992-01-01

    A conceptual and preliminary designers' cost prediction model has been initiated. The model will provide a technically sound method for evaluating the relative cost of different composite structural designs, fabrication processes, and assembly methods that can be compared to equivalent metallic parts or assemblies. The feasibility of developing cost prediction software in a modular form for interfacing with state of the art preliminary design tools and computer aided design programs is being evaluated. The goal of this task is to establish theoretical cost functions that relate geometric design features to summed material cost and labor content in terms of process mechanics and physics. The output of the designers' present analytical tools will be input for the designers' cost prediction model to provide the designer with a data base and deterministic cost methodology that allows one to trade and synthesize designs with both cost and weight as objective functions for optimization. The approach, goals, plans, and progress is presented for development of COSTADE (Cost Optimization Software for Transport Aircraft Design Evaluation).

  12. Designers' unified cost model

    Science.gov (United States)

    Freeman, W.; Ilcewicz, L.; Swanson, G.; Gutowski, T.

    1992-01-01

    The Structures Technology Program Office (STPO) at NASA LaRC has initiated development of a conceptual and preliminary designers' cost prediction model. The model will provide a technically sound method for evaluating the relative cost of different composite structural designs, fabrication processes, and assembly methods that can be compared to equivalent metallic parts or assemblies. The feasibility of developing cost prediction software in a modular form for interfacing with state-of-the-art preliminary design tools and computer aided design programs is being evaluated. The goal of this task is to establish theoretical cost functions that relate geometric design features to summed material cost and labor content in terms of process mechanics and physics. The output of the designers' present analytical tools will be input for the designers' cost prediction model to provide the designer with a database and deterministic cost methodology that allows one to trade and synthesize designs with both cost and weight as objective functions for optimization. This paper presents the team members, approach, goals, plans, and progress to date for development of COSTADE (Cost Optimization Software for Transport Aircraft Design Evaluation).

  13. Home care providers to the rescue

    DEFF Research Database (Denmark)

    Hansen, Steen Møller; Brøndum, Stig; Thomas, Grethe

    2015-01-01

    AIM: To describe the implementation of a novel first-responder programme in which home care providers equipped with automated external defibrillators (AEDs) were dispatched in parallel with existing emergency medical services in the event of a suspected out-of-hospital cardiac arrest (OHCA......). METHODS: We evaluated a one-year prospective study that trained home care providers in performing cardiopulmonary resuscitation (CPR) and using an AED in cases of suspected OHCA. Data were collected from cardiac arrest case files, case files from each provider dispatch and a survey among dispatched...... providers. The study was conducted in a rural district in Denmark. RESULTS: Home care providers were dispatched to 28 of the 60 OHCAs that occurred in the study period. In ten cases the providers arrived before the ambulance service and subsequently performed CPR. AED analysis was executed in three cases...

  14. Design Research

    DEFF Research Database (Denmark)

    Design Research is a new interdisciplinary research area with a social science orientation at its heart, and this book explores how scientific knowledge can be put into practice in ways that are at once ethical, creative, helpful, and extraordinary in their results. In order to clarify the common...... aspects – in terms of features and approaches – that characterize all strands of research disciplines addressing design, Design Research undertakes an in depth exploration of the social processes involved in doing design, as well as analyses of the contexts for design use. The book further elicits...... ‘synergies from interdisciplinary perspectives’ by discussing and elaborating on differing academic perspectives, theoretical backgrounds, and design concept definitions, and evaluating their unique contribution to a general core of design research. This book is an exciting contribution to this little...

  15. The design of lighting

    CERN Document Server

    Tregenza, Peter

    2013-01-01

    This fully updated edition of the successful book The Design of Lighting, provides the lighting knowledge needed by the architect in practice, the interior designer and students of both disciplines. The new edition offers a clear structure, carefully selected material and linking of lighting with other subjects, in order to provide the reader with a comprehensive and specifically architectural approach to lighting. Features of this new edition include:technical knowledge of lighting in the context of architectural design;an emphasis on imagination in architectural light and presentation of the

  16. Circuit design for reliability

    CERN Document Server

    Cao, Yu; Wirth, Gilson

    2015-01-01

    This book presents physical understanding, modeling and simulation, on-chip characterization, layout solutions, and design techniques that are effective to enhance the reliability of various circuit units.  The authors provide readers with techniques for state of the art and future technologies, ranging from technology modeling, fault detection and analysis, circuit hardening, and reliability management. Provides comprehensive review on various reliability mechanisms at sub-45nm nodes; Describes practical modeling and characterization techniques for reliability; Includes thorough presentation of robust design techniques for major VLSI design units; Promotes physical understanding with first-principle simulations.

  17. Enabling Wireless Cooperation in User Provided Networks

    OpenAIRE

    Rolla, Vitor Guerra

    2015-01-01

    Tese de doutoramento em Ciências e Tecnologias da Informação, apresentada ao Departamento de Engenharia Informática da Faculdade de Ciências e Tecnologia da Universidade de Coimbra This doctoral thesis investigates user provided networks. Such networks have become important research subjects in the field of informatics engineering due to the recent popularity of smart phones. User provided networks are independent from traditional Internet service providers. Communication and informati...

  18. Design Research as Conceptual Designing

    DEFF Research Database (Denmark)

    Ylirisku, Salu; Jacucci, Giulio; Sellen, Abigail

    2015-01-01

    define conceptual designing as a constructive framing and re-framing activity, which is mediated by and targeted at the creation of new design concepts. Conceptual designing as an approach is valuable for addressing the fuzziness and ambiguity typical of research that explores novel areas with new...... partners, methods and resources. It is by no means a new phenomenon, and the main contribution of the article is the clarification of conceptual designing as a particular approach to designing and researching. The approach embraces openness, resource-construction and collaboration. We conclude...... that conceptual designing can be especially useful in research and design projects that bring different kinds of people, organizations, technologies and domains together into the forming of new well-founded proposals for development. The presentation of conceptual designing in this paper is written...

  19. EMS providers do not use FOAM for education.

    Science.gov (United States)

    Bucher, Joshua; Donovan, Colleen; McCoy, Jonathan

    2018-05-24

    Free open access to medical education (FOAM, #FOAM) is the free availability of educational materials on various medicine topics. We hope to evaluate the use of social media and FOAM by emergency medical services (EMS) providers. We designed an online survey distributed to EMS providers with questions about demographics and social media/FOAM use by providers. The survey was sent to the American College of Emergency Physicians (ACEP) EMS Listserv of medical directors and was asked to be distributed to their respective agencies. The survey was designed to inquire about the providers' knowledge of FOAM and social media and their use of the above for EMS education. There were 169 respondents out of a total of 523 providers yielding a response rate of 32.3%. Fifty-three percent of respondents are paramedics, 37% are EMT-Basic trained, and the remainder (16%) were "other." The minority (20%) of respondents had heard of FOAM. However, 54% of respondents had heard of "free medical education online" regarding pertinent topics. Of the total respondents who used social media for education, 31% used Facebook and 23% used blogs and podcasts as resources for online education. Only 4% of respondents stated they produced FOAM content. Seventy-six percent of respondents said they were "interested" or "very interested" in using FOAM for medical education. If FOAM provided continuing medical education (CME), 83% of respondents would be interested in using it. Social media is not used frequently by EMS providers for the purposes of FOAM. There is interest within EMS providers to use FOAM for education, even if CME was not provided. FOAM can provide a novel area of education for EMS.

  20. Digital architecture, wearable computers and providing affinity

    DEFF Research Database (Denmark)

    Guglielmi, Michel; Johannesen, Hanne Louise

    2005-01-01

    as the setting for the events of experience. Contemporary architecture is a meta-space residing almost any thinkable field, striving to blur boundaries between art, architecture, design and urbanity and break down the distinction between the material and the user or inhabitant. The presentation for this paper...... will, through research, a workshop and participation in a cumulus competition, focus on the exploration of boundaries between digital architecture, performative space and wearable computers. Our design method in general focuses on the interplay between the performing body and the environment – between...

  1. HVAC systems design handbook

    CERN Document Server

    Haines, Roger W

    2010-01-01

    Thoroughly updated with the latest codes, technologies, and practices, this all-in-one resource provides details, calculations, and specifications for designing efficient and effective residential, commercial, and industrial HVAC systems. HVAC Systems Design Handbook, Fifth Edition, features new information on energy conservation and computer usage for design and control, as well as the most recent International Code Council (ICC) Mechanical Code requirements. Detailed illustrations, tables, and essential HVAC equations are also included. This comprehensive guide contains everything you need to design, operate, and maintain peak-performing HVAC systems.

  2. Designing for Immediate Play

    DEFF Research Database (Denmark)

    Pichlmair, Martin; Mech, Lena; Sicart, Miguel Angel

    2017-01-01

    This paper is concerned with designing for immediate play, the experience that a player has when joining a game designed for being played without particular preparation. Museum games, urban games, casual sports, and ad-hoc multiplayer video games are kinds of games that facilitate immediate play...... offer using examples and expert opinions. While most practices and game examples mentioned in this paper are from non-digital games, a special focus is put on the role of technology in immediately playable experiences. Still, the examined design dimensions are independent of the technological foundation...... of the game. This paper provides a starting point for designing better immediate play situations....

  3. Design (research) practice

    DEFF Research Database (Denmark)

    Binder, Thomas; Brandt, Eva

    2017-01-01

    possibilities through experimentation (Brandt and Binder 2007). Likewise in relation to design research we have argued that “the possible is always contingent and though research may convincingly provide arguments for certain possibilities both search and arguments have to be guided by programs that set...... substantiate or challenge this view and the dialectic between program and probing is in our view central to any design practice” (Binder and Redström 2006: 4). Our suggestion is to see design research practices as fundamentally homologous to any other design practices both in terms of the way they are driven...

  4. Comparison of Problem Solving from Engineering Design to Software Design

    DEFF Research Database (Denmark)

    Ahmed-Kristensen, Saeema; Babar, Muhammad Ali

    2012-01-01

    Observational studies of engineering design activities can inform the research community on the problem solving models that are employed by professional engineers. Design is defined as an ill-defined problem which includes both engineering design and software design, hence understanding problem...... solving models from other design domains is of interest to the engineering design community. For this paper an observational study of two software design sessions performed for the workshop on “Studying professional Software Design” is compared to analysis from engineering design. These findings provide...... useful insights of how software designers move from a problem domain to a solution domain and the commonalities between software designers’ and engineering designers’ design activities. The software designers were found to move quickly to a detailed design phase, employ co-.evolution and adopt...

  5. Comparison of Problem Solving from Engineering Design to Software Design

    DEFF Research Database (Denmark)

    Ahmed-Kristensen, Saeema; Babar, Muhammad Ali

    2012-01-01

    solving models from other design domains is of interest to the engineering design community. For this paper an observational study of two software design sessions performed for the workshop on “Studying professional Software Design” is compared to analysis from engineering design. These findings provide......Observational studies of engineering design activities can inform the research community on the problem solving models that are employed by professional engineers. Design is defined as an ill-defined problem which includes both engineering design and software design, hence understanding problem...... useful insights of how software designers move from a problem domain to a solution domain and the commonalities between software designers’ and engineering designers’ design activities. The software designers were found to move quickly to a detailed design phase, employ co-.evolution and adopt...

  6. Design Theory Projectability

    DEFF Research Database (Denmark)

    Baskerville, Richard; Pries-Heje, Jan

    2014-01-01

    design science research is materially prescriptive, it requires a different perspective in developing the breadth of applications of design theories. In this paper we propose different concepts that embody forms of general technological knowledge The concept of projectability, developed originally......Technological knowledge has been characterized as having a scope that is specific to a particular problem. However, the information systems community is exploring forms of design science research that provide a promising avenue to technological knowledge with broader scope: design theories. Because...... as a means of distinguishing realized generalizations from unrealized generalizations, helps explain how design theories, being prescriptive, possess a different form of applicability. The concept of entrenchment describes the use of a theory in many projections. Together these concepts provide a means...

  7. CMOS analog circuit design

    CERN Document Server

    Allen, Phillip E

    1987-01-01

    This text presents the principles and techniques for designing analog circuits to be implemented in a CMOS technology. The level is appropriate for seniors and graduate students familiar with basic electronics, including biasing, modeling, circuit analysis, and some familiarity with frequency response. Students learn the methodology of analog integrated circuit design through a hierarchically-oriented approach to the subject that provides thorough background and practical guidance for designing CMOS analog circuits, including modeling, simulation, and testing. The authors' vast industrial experience and knowledge is reflected in the circuits, techniques, and principles presented. They even identify the many common pitfalls that lie in the path of the beginning designer--expert advice from veteran designers. The text mixes the academic and practical viewpoints in a treatment that is neither superficial nor overly detailed, providing the perfect balance.

  8. Browsing for the Best Internet Access Provider?

    Science.gov (United States)

    Weil, Marty

    1996-01-01

    Highlights points to consider when choosing an Internet Service Provider. Serial Line Internet Protocol (SLIP) and Point to Point Protocol (PPP) are compared regarding price, performance, bandwidth, speed, and technical support. Obtaining access via local, national, consumer online, and telephone-company providers is discussed. A pricing chart and…

  9. a qualitative study of providers' perspectives

    African Journals Online (AJOL)

    Background: Glaucoma management is challenging to patients as well as to the eye care providers.The study is aimed at describing the challenges faced by providers using qualitative methods. Methods: In-depth interviews were conducted with selected Ophthalmologists and resident doctors in ophthalmology at centres ...

  10. Medicaid provider reimbursement policy for adult immunizations.

    Science.gov (United States)

    Stewart, Alexandra M; Lindley, Megan C; Cox, Marisa A

    2015-10-26

    State Medicaid programs establish provider reimbursement policy for adult immunizations based on: costs, private insurance payments, and percentage of Medicare payments for equivalent services. Each program determines provider eligibility, payment amount, and permissible settings for administration. Total reimbursement consists of different combinations of Current Procedural Terminology codes: vaccine, vaccine administration, and visit. Determine how Medicaid programs in the 50 states and the District of Columbia approach provider reimbursement for adult immunizations. Observational analysis using document review and a survey. Medicaid administrators in 50 states and the District of Columbia. Whether fee-for-service programs reimburse providers for: vaccines; their administration; and/or office visits when provided to adult enrollees. We assessed whether adult vaccination services are reimbursed when administered by a wide range of providers in a wide range of settings. Medicaid programs use one of 4 payment methods for adults: (1) a vaccine and an administration code; (2) a vaccine and visit code; (3) a vaccine code; and (4) a vaccine, visit, and administration code. Study results do not reflect any changes related to implementation of national health reform. Nine of fifty one programs did not respond to the survey or declined to participate, limiting the information available to researchers. Medicaid reimbursement policy for adult vaccines impacts provider participation and enrollee access and uptake. While programs have generally increased reimbursement levels since 2003, each program could assess whether current policies reflect the most effective approach to encourage providers to increase vaccination services. Copyright © 2015 Elsevier Ltd. All rights reserved.

  11. Piezo pump and pressurized circuit provided therewith

    NARCIS (Netherlands)

    Van Es, Johannes; Wits, Wessel Willems

    2015-01-01

    A piezo pump for use in a pressurized circuit includes a pump chamber with an inlet provided with a one way inlet valve, for connection to a feeding line of the pressurized circuit and an outlet provided with a one way outlet valve, for connection to a discharge line of the pressurized circuit and a

  12. D 59 Design Guidelines

    DEFF Research Database (Denmark)

    Burcharth, Hans F.; Lamberti, Alberto

    The present guidelines are specifically dedicated to Low Crested Structures on attempt to provide methodological tools both for the engineering design of structures and for prediction of performance and environmental impacts. It is anticipated that the guidelines will provide valuable inputs to c...

  13. FDH radiological design review guidelines

    International Nuclear Information System (INIS)

    Millsap, W.J.

    1998-01-01

    These guidelines discuss in more detail the radiological design review process used by the Project Hanford Management Contractors as described in HNF-PRO-1622, Radiological Design Review Process. They are intended to supplement the procedure by providing background information on the design review process and providing a ready source of information to design reviewers. The guidelines are not intended to contain all the information in the procedure, but at points, in order to maintain continuity, they contain some of the same information

  14. Position paper: Seismic design criteria

    International Nuclear Information System (INIS)

    Farnworth, S.K.

    1995-01-01

    The purpose of this paper is to document the seismic design criteria to be used on the Title 11 design of the underground double-shell waste storage tanks and appurtenant facilities of the Multi-Function Waste Tank Facility (MWTF) project, and to provide the history and methodologies for determining the recommended Design Basis Earthquake (DBE) Peak Ground Acceleration (PGA) anchors for site-specific seismic response spectra curves. Response spectra curves for use in design are provided in Appendix A

  15. FDH radiological design review guidelines

    Energy Technology Data Exchange (ETDEWEB)

    Millsap, W.J.

    1998-09-29

    These guidelines discuss in more detail the radiological design review process used by the Project Hanford Management Contractors as described in HNF-PRO-1622, Radiological Design Review Process. They are intended to supplement the procedure by providing background information on the design review process and providing a ready source of information to design reviewers. The guidelines are not intended to contain all the information in the procedure, but at points, in order to maintain continuity, they contain some of the same information.

  16. Empathic design: Research strategies

    Directory of Open Access Journals (Sweden)

    Joyce Thomas

    2013-01-01

    Full Text Available This paper explores the role of empathy within new product development from the perspective of human-centred design. The authors have developed a range of empathic design tools and strategies that help to identify authentic human needs.For products and services to be effective, they need to satisfy both functional and emotional needs of individuals. In addition, the individual user needs to feel that the product and/or service has been designed ‘just for them’, otherwise they may misuse, underuse or abandon the product/service. This becomes critical with a product such as a Zimmer frame (walker, when it fails to resonate with the patient due to any stigma the patient may perceive, and thus remains unused.When training young designers to consider the wider community (people unlike themselves during the design process, it has proven extremely valuable to take them outside their comfort zones, by seeking to develop empathy with the end user for whom they are designing. Empathic modelling offers designers the opportunity to develop greater insight and understanding, in order to support more effective design outcomes. Sensitising designers to the different ways that individuals complete daily tasks has helped to diminish the gap between themselves and others (e.g. people with disabilities.The authors intend for this paper to resonate with health care providers. Human-centred design can help to refocus the designer, by placing the individual end user’s needs at the heart of their decision-making.

  17. Empathic design: Research strategies.

    Science.gov (United States)

    Thomas, Joyce; McDonagh, Deana

    2013-01-01

    This paper explores the role of empathy within new product development from the perspective of human-centred design. The authors have developed a range of empathic design tools and strategies that help to identify authentic human needs.For products and services to be effective, they need to satisfy both functional and emotional needs of individuals. In addition, the individual user needs to feel that the product and/or service has been designed 'just for them', otherwise they may misuse, underuse or abandon the product/service. This becomes critical with a product such as a Zimmer frame (walker), when it fails to resonate with the patient due to any stigma the patient may perceive, and thus remains unused.When training young designers to consider the wider community (people unlike themselves) during the design process, it has proven extremely valuable to take them outside their comfort zones, by seeking to develop empathy with the end user for whom they are designing. Empathic modelling offers designers the opportunity to develop greater insight and understanding, in order to support more effective design outcomes. Sensitising designers to the different ways that individuals complete daily tasks has helped to diminish the gap between themselves and others (e.g. people with disabilities).The authors intend for this paper to resonate with health care providers. Human-centred design can help to refocus the designer, by placing the individual end user's needs at the heart of their decision-making.

  18. Guide to Working with Model Providers.

    Science.gov (United States)

    Walter, Katie; Hassel, Bryan C.

    Often a central feature of a school's improvement efforts is the adoption of a Comprehensive School Reform (CSR) model, an externally developed research-based design for school improvement. Adopting a model is only the first step in CSR. Another important step is forging partnerships with developers of CSR models. This guide aims to help schools…

  19. Providing Campus Environmental Coherence by Landscaping.

    Science.gov (United States)

    Pawsey, Maurice R.

    1982-01-01

    A landscaping approach aimed at integrating greatly contrasting building types and materials resulting from unplanned growth used these elements to create design continuity; paving, planting, landscape furniture, planting and lawn protection, signs, lights, placement of posters and notices, and bicycle racks. (MSE)

  20. Design Education

    DEFF Research Database (Denmark)

    Brandt, Eva

    2007-01-01

    In resent years the two main design schools in Denmark (Danmarks Designskole and Designskolen Kolding ) undergo many changes. The overall goal for both is to obtain status as a university, and they will be evaluated in this regard in 2010. Transforming a vocational school with long handicraft...... traditions into a research based institution for higher education is demanding. Danmarks Designskole is in the middle of this process, many activities are initiated, both employees and students are involved, and from outside representatives from various design professions. The design process has many...... stakeholders with various interests and opinions. The aim it is not to design a computer system, a service or product but re-designing curriculum, work procedures, self images etc. which support educating designers of the future. This paper reports on two investigations that have been carried through as part...

  1. Cooperative design

    DEFF Research Database (Denmark)

    Schmidt, Kjeld

    1998-01-01

    In the contemporary world, engineers and designers face huge challenges as they shift towards novel organizational concepts such as ‘concurrent engineering’ in order to manage increasing product diversity so as to satisfy customer demands while trying to accelerate the design process to deal...... they are facing. On one hand, designers need highly flexible ‘coordination mecha-nisms’ that can support horizontal coordination of large-scale distributed design projects, and on the other hand design organizations require versatile and ubiquitous infrastructures to be able to manage their ‘common informa...... with the competitive realities of a global market and decreasing product life cycles. In this environment, the coordination and integration of the myriads of interdependent and yet distributed and concurrent design activities becomes enormously complex. It thus seems as if CSCW technologies may be indispensable...

  2. Workspace Design

    DEFF Research Database (Denmark)

    Seim, Rikke

    Arbejdsmiljø adresseres sjældent i den klassike tekniske tilgang til arbejdspladsdesign. Workspace Design konceptet er et alternativ tilgang til design eller re-design af arbejdspladser, baseret på en socio-teknisk systemforståelse, hvor hovedprincipperne er 1) transformation af...... arbejdsmiljørådgiveren til facilitator af arbejdspladsdesignprocessen og 2) transformation af medarbejderne til co-designere af deres egen arbejdsplads. Dette ph.d.-projekt er en del af Workspace Design forskningsprogrammet som har udviklet og testet Workspace Design konceptet og de tilhørende metoder ved intervention i...... arbejdspladsdesignprocesser i tre virksomheder tilhørende henholdsvis industri-, service- og sundhedssektoren. Ph.d.-projektet har belyst hvordan en medarbejderinvolverende designproces kan iscenesættes og faciliteres af arbejdsmiljøprofessionelle ved hjælp af kreative, visuelle metoder inspireret af Participatory Design...

  3. Design culture and design education

    DEFF Research Database (Denmark)

    Riisberg, Vibeke; Bang, Anne Louise

    2014-01-01

    to change the education of future designers. This is an emerging field at a number of design schools across the world, among these Design School Kolding in Denmark. In this paper we understand and discuss design education as part of a cultural phenomenon. The aim of our research is to develop new dialogue...... tools for teaching fashion and textile students in order to stimulate new ways of thinking and engaging with users. By employing participatory design methods in the field of fashion and textiles, we seek to develop an alternative transformational strategy that may further the design of products....... In this paper we discuss ways in which design education might contribute in changing the current professional culture in order to meet the need for more sustainable futures....

  4. Integrated Design

    DEFF Research Database (Denmark)

    Jørgensen, Michael; Nielsen, M. W.; Strømann-Andersen, Jakob Bjørn

    2011-01-01

    and describe the decision process. Specific attention is given to how the engineering input was presented and how it was able to facilitate the design development. Site and context, building shape, organization of functions and HVAC-systems were all included to obtain a complete picture of the building......, low-energy consumption, and high-quality indoor environment. We use this case study to investigate how technical knowledge about building performance can be integrated into the conceptual design stage. We have selected certain points during the design process that represented design challenges...

  5. Design Diversity

    DEFF Research Database (Denmark)

    Dankl, Kathrina

    2014-01-01

    . The exhibition is oriented along disciplines such as inclusive design, which calls for products to be designed in such a way that they are equally attractive to people of all ages. Despite the existence of innovative design concepts, the number of well-designed products available on the market is low. While many...... courageous projects for "best agers" and "golden agers" never get beyond the prototype stage, products that paint a more "beige" picture of everyday life can be found in large numbers. This fact raises some key questions: Does the existing product culture reflect today's views on old age? Do contemporary...

  6. Team designing

    DEFF Research Database (Denmark)

    Denise J. Stokholm, Marianne

    2012-01-01

    Future wellbeing is depending on human competences in order to strengthen a sustainable development. This requires system thinking and ability to deal with complexity, dynamic and a vast of information. `We need to move away from present principles of breaking down problems into components and gi...... thinking and communication in design. Trying to answer the question: How can visual system models facilitate learning in design thinking and team designing?......Future wellbeing is depending on human competences in order to strengthen a sustainable development. This requires system thinking and ability to deal with complexity, dynamic and a vast of information. `We need to move away from present principles of breaking down problems into components and give...... in relation to a design-engineering education at Aalborg University. It will exemplify how the model has been used in workshops on team designing, challenged design learning and affected design competence. In specific it will investigate the influence of visual models of the perception of design, design...

  7. Design Compass

    DEFF Research Database (Denmark)

    Stokholm, Marianne Denise J.

    2006-01-01

    Design is moreover recognised as an important strategic tool in achieving competitive business´, products and services in a global market. As design becomes a more complex matter, due to a general increase in knowledge, requirements and internationalisation, more professions are involved....... As such it acts a managing tool for both leaders and participants in the design process. This paper builds on long term practical experiment with development and use of a simple tool to support management of complex design matters in diverse groups. Concerning education it has supported the development of new...

  8. Design theory

    CERN Document Server

    2009-01-01

    This book deals with the basic subjects of design theory. It begins with balanced incomplete block designs, various constructions of which are described in ample detail. In particular, finite projective and affine planes, difference sets and Hadamard matrices, as tools to construct balanced incomplete block designs, are included. Orthogonal latin squares are also treated in detail. Zhu's simpler proof of the falsity of Euler's conjecture is included. The construction of some classes of balanced incomplete block designs, such as Steiner triple systems and Kirkman triple systems, are also given.

  9. Effective communication with primary care providers.

    Science.gov (United States)

    Smith, Karen

    2014-08-01

    Effective communication requires direct interaction between the hospitalist and the primary care provider using a standardized method of information exchange with the opportunity to ask questions and assign accountability for follow-up roles. The discharge summary is part of the process but does not provide the important aspects of handoff, such as closed loop communication and role assignments. Hospital discharge is a significant safety risk for patients, with more than half of discharged patients experiencing at least one error. Hospitalist and primary care providers need to collaborate to develop a standardized system to communicate about shared patients that meets handoff requirements. Copyright © 2014 Elsevier Inc. All rights reserved.

  10. Liaison based assembly design

    Energy Technology Data Exchange (ETDEWEB)

    Ames, A.; Kholwadwala, D.; Wilson, R.H.

    1996-12-01

    Liaison Based Assembly Design extends the current information infrastructure to support design in terms of kinematic relationships between parts, or liaisons. These liaisons capture information regarding contact, degrees-of-freedom constraints and containment relationships between parts in an assembly. The project involved defining a useful collection of liaison representations, investigating their properties, and providing for maximum use of the data in downstream applications. We tested our ideas by implementing a prototype system involving extensions to Pro/Engineer and the Archimedes assembly planner. With an expanded product model, the design system is more able to capture design intent. When a product update is attempted, increased knowledge availability improves our ability to understand the effect of design changes. Manufacturing and analysis disciplines benefit from having liaison information available, so less time is wasted arguing over incomplete design specifications and our enterprise can be more completely integrated.

  11. Assembly tool design

    International Nuclear Information System (INIS)

    Kanamori, Naokazu; Nakahira, Masataka; Ohkawa, Yoshinao; Tada, Eisuke; Seki, Masahiro

    1996-06-01

    The reactor core of the International Thermonuclear Experimental Reactor (ITER) is assembled with a number of large and asymmetric components within a tight tolerance in order to assure the structural integrity for various loads and to provide the tritium confinement. In addition, the assembly procedure should be compatible with remote operation since the core structures will be activated by 14-MeV neutrons once it starts operation and thus personal access will be prohibited. Accordingly, the assembly procedure and tool design are quite essential and should be designed from the beginning to facilitate remote operation. According to the ITER Design Task Agreement, the Japan Atomic Energy Research Institute (JAERI) has performed design study to develop the assembly procedures and associated tool design for the ITER tokamak assembly. This report describes outlines of the assembly tools and the remaining issues obtained in this design study. (author)

  12. Healthcare providers' attitudes and perceptions in infection ...

    African Journals Online (AJOL)

    EB

    Objectives: To assess the attitudes and perceptions of healthcare providers ... antibiotics and only 32% always send a sample for culture sensitivity ..... resistance - A global issue of concern. Asian J. Pharma Clin Res. 2009; 2(2): 34 - 39. 4.

  13. Medicare Provider Utilization and Payment Data - Outpatient

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Outpatient Utilization and Payment Public Use File (Outpatient PUF) presents information on common outpatient services provided to Medicare fee-for-service...

  14. Medicare Referring Provider (DMEPOS) Data CY2013

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Centers for Medicare and Medicaid Services (CMS) released a new dataset, the Referring Provider Durable Medical Equipment, Prosthetics, Orthotics and Supplies...

  15. Medicare Provider Utilization and Payment Data

    Data.gov (United States)

    U.S. Department of Health & Human Services — CMS has released a series of publicly available data files that summarize the utilization and payments for procedures, services, and prescription drugs provided to...

  16. Medicare Provider Analysis and Review (MEDPAR)

    Data.gov (United States)

    U.S. Department of Health & Human Services — MEDPAR files contain information on Medicare beneficiaries using hospital inpatient services. The data is provided by the state and the Diagnosis Related Groups...

  17. Ecolo Watt. Ecologic comparison of electricity providers

    International Nuclear Information System (INIS)

    2007-09-01

    As consumers now can choose their electricity provider, Greenpeace proposes Ecolo Watt, a system which assesses the different providers, more particularly in terms of protection of the environment. This document first describes the electricity market liberalisation (principle, market opening process, a shake-up of the French electric landscape, obligations for the providers). It presents the green electricity market (original guarantees, the questionable system of green certificates, and the Eve label). It describes the methodology adopted for the Ecolo Watt comparative assessment: assessment criteria, final mark. It presents the ranking of electricity providers while analysing their energy mix, their energy policy, their energy service and sales policy, the quality and transparency of information). Detailed results are presented for each operator

  18. VT Wireless Internet Service Providers 2006

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VT Wireless Internet Service Provider (ISP) dataset (WISP2006) includes polygons depicting the extent of Vermont's WISP broadband system as of...

  19. Provider Customer Service Program - Performance Data

    Data.gov (United States)

    U.S. Department of Health & Human Services — CMS is continuously analyzing performance and quality of the Provider Customer Service Programs (PCSPs) of the contractors and will be identifying trends and making...

  20. National Provider Identifier Standard - Data Dissemination

    Data.gov (United States)

    U.S. Department of Health & Human Services — The National Plan and Provider Enumeration System, NPPES, downloadable file, also referred to as the NPI Downloadable File, contains FOIA disclosable NPPES health...

  1. Medicare Referring Provider DMEPOS PUF CY2013

    Data.gov (United States)

    U.S. Department of Health & Human Services — This dataset, which is part of CMSs Medicare Provider Utilization and Payment Data, details information on Durable Medical Equipment, Prosthetics, Orthotics and...

  2. Medicare Provider Utilization and Payment Data - Inpatient

    Data.gov (United States)

    U.S. Department of Health & Human Services — The data provided here include hospital-specific charges for the more than 3,000 U.S. hospitals that receive Medicare Inpatient Prospective Payment System (IPPS)...

  3. parents' and healthcare providers perspectives about hospitalised

    African Journals Online (AJOL)

    2013-04-04

    Apr 4, 2013 ... and the parents and healthcare providers' views on hospitalised children being visited ... because it promotes healing, gives the sick child psychological satisfaction and ..... Mental Health in Early Post-Second World War.

  4. Parents' and healthcare providers perspectives about hospitalised ...

    African Journals Online (AJOL)

    Parents' and healthcare providers perspectives about hospitalised children being visited by other ... Log in or Register to get access to full text downloads. ... children should be visited by other children has been accorded minimal attention.

  5. CARAVAN: Providing Location Privacy for VANET

    National Research Council Canada - National Science Library

    Sampigethaya, Krishna; Huang, Leping; Li, Mingyan; Poovendran, Radha; Matsuura, Kanta; Sezaki, Kaoru

    2005-01-01

    .... This type of tracking leads to threats on the location privacy of the vehicle's user. In this paper, we study the problem of providing location privacy in VANET by allowing vehicles to prevent tracking of their broadcast communications...

  6. VT Wireless Internet Service Providers 2007

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VT Wireless Internet Service Provider (ISP) dataset (WISP2007) includes polygons depicting the extent of Vermont's WISP broadband system as of...

  7. Mental Health Insurance Parity and Provider Wages.

    Science.gov (United States)

    Golberstein, Ezra; Busch, Susan H

    2017-06-01

    Policymakers frequently mandate that employers or insurers provide insurance benefits deemed to be critical to individuals' well-being. However, in the presence of private market imperfections, mandates that increase demand for a service can lead to price increases for that service, without necessarily affecting the quantity being supplied. We test this idea empirically by looking at mental health parity mandates. This study evaluated whether implementation of parity laws was associated with changes in mental health provider wages. Quasi-experimental analysis of average wages by state and year for six mental health care-related occupations were considered: Clinical, Counseling, and School Psychologists; Substance Abuse and Behavioral Disorder Counselors; Marriage and Family Therapists; Mental Health Counselors; Mental Health and Substance Abuse Social Workers; and Psychiatrists. Data from 1999-2013 were used to estimate the association between the implementation of state mental health parity laws and the Paul Wellstone and Pete Domenici Mental Health Parity and Addiction Equity Act and average mental health provider wages. Mental health parity laws were associated with a significant increase in mental health care provider wages controlling for changes in mental health provider wages in states not exposed to parity (3.5 percent [95% CI: 0.3%, 6.6%]; pwages. Health insurance benefit expansions may lead to increased prices for health services when the private market that supplies the service is imperfect or constrained. In the context of mental health parity, this work suggests that part of the value of expanding insurance benefits for mental health coverage was captured by providers. Given historically low wage levels of mental health providers, this increase may be a first step in bringing mental health provider wages in line with parallel health professions, potentially reducing turnover rates and improving treatment quality.

  8. Arkansas community pharmacists' opinions on providing immunizations.

    Science.gov (United States)

    Pace, Anne C; Flowers, Schwanda K; Hastings, Jan K

    2010-10-01

    To determine community pharmacists' attitudes and knowledge on providing immunizations including perceived barriers to immunizing. The study also examined the percentage of Arkansas pharmacists providing immunizations and the utilization of student pharmacists. Survey. Arkansas community pharmacies from February to March 2009. Community pharmacists. Mailed survey. Perceived barriers to providing immunizations, pharmacists' attitudes regarding immunizations, number of immunization-certified pharmacists, immunization administration rates within the last year, and senior student pharmacists utilization. A total of 350 surveys were mailed, and 129 were returned. In all, 79% of the respondents believed administering immunizations has advanced or significantly advanced the profession. Being certified and attitude toward providing immunizations were correlated; 37% of the respondents held certification to immunize, of which 77% reported immunizing within the last year. Commonly reported barriers included time (76%) followed by reimbursement and legal liability. Only half the respondents realized fourth year student pharmacists could immunize and only 33% of certified pharmacists utilized student pharmacists to immunize. Pharmacists perceive many barriers to providing immunizations. Training student pharmacists to give immunizations may not result in them providing immunizations upon graduation. Additional education on overcoming potential barriers and using senior student pharmacists to administer immunizations is needed.

  9. Interior Design.

    Science.gov (United States)

    Texas Tech Univ., Lubbock. Home Economics Curriculum Center.

    This document contains teacher's materials for an eight-unit secondary education vocational home economics course on interior design. The units cover period styles of interiors, furniture and accessories, surface treatments and lighting, appliances and equipment, design and space planning in home and business settings, occupant needs, acquisition…

  10. Opportunity Design

    DEFF Research Database (Denmark)

    Løwe Nielsen, Suna; Lassen, Astrid Heidemann; Nielsen, Louise Møller

    2013-01-01

    design”. The framework explains how opportunities intentionally and pro-actively can be designed from methods and processes of moving-in and moving-out. An illustrative case of opportunity design within the area of sustainable energy and electric cars is presented to link the theoretical discussion...

  11. Publication Design.

    Science.gov (United States)

    Nelson, Roy Paul

    This book is designed to solve the problem of coordinating art and typography with content in publications. Through text and illustrations, this book suggests ways to make pages and spreads in magazines, newspapers, and books attractive and readable. As a book of techniques, it is directed at potential and practicing art directors, designers, and…

  12. Designing friends

    NARCIS (Netherlands)

    Heylen, Dirk K.J.; Nijholt, Antinus; Stronks, B.; van der Vet, P.E.; Rosenberg, D.

    2003-01-01

    Embodied Conversational Agents are virtual humans that can interact with humans using verbal and non-verbal forms of communication. In most cases, they have been designed for short interactions. This paper asks the question how one would start to design synthetic characters that can become your

  13. Design tools

    Science.gov (United States)

    Anton TenWolde; Mark T. Bomberg

    2009-01-01

    Overall, despite the lack of exact input data, the use of design tools, including models, is much superior to the simple following of rules of thumbs, and a moisture analysis should be standard procedure for any building envelope design. Exceptions can only be made for buildings in the same climate, similar occupancy, and similar envelope construction. This chapter...

  14. Integrated Design

    DEFF Research Database (Denmark)

    Lenau, Torben Anker

    1999-01-01

    A homepage on the internet with course material, lecture plan, student exercises, etc. Continuesly updated during the course Integrated Design (80402, 80403)......A homepage on the internet with course material, lecture plan, student exercises, etc. Continuesly updated during the course Integrated Design (80402, 80403)...

  15. Persuasive Design

    DEFF Research Database (Denmark)

    Gram-Hansen, Sandra Burri

    2013-01-01

    of the specific context. This paper argues that the claim of persuasive design may not be the ability to change the user’s attitude or behaviour towards a given subject, but rather on the ability to create designs, which adapt the context in a way, which facilitates the ability to act within the opportune moment....

  16. Japansk design

    DEFF Research Database (Denmark)

    Kural, René

    2005-01-01

    Artiklen udspringer af interviews med ti af Japans bedste møbeldesignere, grafikere, arkitekter og designfirmaer. Efter samtalerne var der tre træk ved japansk design, som trådte frem: god økonomi, fantasi og vovemod. Det bedste japanske design fusionerer vovemod med den unikke japanske kultur med...

  17. Intelligent Design

    DEFF Research Database (Denmark)

    Hjorth, Poul G.

    2005-01-01

    Forestillingen om at naturen er designet af en guddommelig 'intelligens' er et smukt filosofisk princip. Teorier om Intelligent Design som en naturvidenskabeligt baseret teori er derimod helt forfærdelig.......Forestillingen om at naturen er designet af en guddommelig 'intelligens' er et smukt filosofisk princip. Teorier om Intelligent Design som en naturvidenskabeligt baseret teori er derimod helt forfærdelig....

  18. Performance Design

    DEFF Research Database (Denmark)

    Svabo, Connie

    Contribution to conference: Art and Presence The emerging field of Performance Design is unfolded as a bastard form of research/art/design/practice, with shapeshifting, monstruous, hybrid and transformational qualities. The potential for presencing, which emerges out of momentarily transgressing...

  19. Design law

    DEFF Research Database (Denmark)

    Schovsbo, Jens Hemmingsen; Riis, Thomas

    2017-01-01

    This book chapter describes, analyses and discusses the development of and the challenges to the legal protection og designs in Scandinavia and the EU......This book chapter describes, analyses and discusses the development of and the challenges to the legal protection og designs in Scandinavia and the EU...

  20. Proceedings of the 2. CDEN design conference

    International Nuclear Information System (INIS)

    Yellowley, I.; Gu, P.

    2005-01-01

    The Canadian Design Engineering Network (CDEN) promotes best practices in engineering design. This annual conference, which provided a forum to exchange ideas and experiences in engineering design, included 2 roundtable discussions on design and innovation in Canadian engineering schools, and design considerations in the accreditation of engineering programs. The conference also featured a student design competition. The main topics of the conference were design education, design for innovation and design practices. Within the topic of design education, the following themes were addressed: design curriculum; design projects and cases; emerging design education tools and techniques; evaluation metrics and techniques in design education; web-based education resources; and, multi-disciplinary design education. Within the topic of design for innovation, the following themes were addressed: technological innovation and creativity; product design; process design; adaptable design; platform and product architecture design; modular design; life cycle issues, reliability, serviceability and disposal/recycling; sustainable design and development; design for manufacturing, construction, services, and the environment; design for life, health and fitness; design methodologies, tools and techniques; distributed design activities and teams; and, web-based design and collaborative design and tools. Within the topic of design practice, the following themes were addressed: engineering, procurement and construction industry; design in auto manufacturing, aerospace industry and high-tech industry; engineering project management; design for sustainability and environmental practices; professional development in engineering design; and, current and future industrial practice trends. The conference featured 30 presentations, of which 5 have been catalogued separately for inclusion in this database. refs., tabs., figs

  1. Randomized, Controlled Trial of CBT Training for PTSD Providers

    Science.gov (United States)

    2013-10-01

    behavioral therapy (CBT) interventions have been shown to be effective in alleviating symptoms of Post - Traumatic Stress Disorder ( PTSD ) and related... traumatic stress disorder treatment providers: design and methods for a randomized, prospective intervention study. Implement Sci, 7, 43. doi: 10.1186...Friedman, M. J., Young-Xu, Y., & Stevens, S. P. (2006). Cognitive processing therapy for veterans with military-related posttraumatic stress disorder

  2. Furniture design

    CERN Document Server

    Smardzewski, Jerzy

    2015-01-01

    Maximizing reader insights into the principles of designing furniture as wooden structures, this book discusses issues related to the history of furniture structures, their classification and characteristics, ergonomic approaches to anthropometric requirements and safety of use. It presents key methods and highlights common errors in designing the characteristics of the materials, components, joints and structures, as well as looking at the challenges regarding developing associated design documentation. Including analysis of how designers may go about calculating the stiffness and endurance of parts, joints and whole structures, the book analyzes questions regarding the loss of furniture stability and the resulting threats to health of the user, putting forward a concept of furniture design as an engineering processes. Creating an attractive, functional, ergonomic and safe piece of furniture is not only the fruit of the work of individual architects and artists, but requires an effort of many people working ...

  3. Learning for design reuse

    DEFF Research Database (Denmark)

    Duffy, Alex; Duffy, Sandra M.

    1996-01-01

    Over the past decade "design assistance", that is, where the computer is viewed as an Intelligent Design Assistant (IDA), has emerged in knowledge based design support and has formed the basic research strategy for the CAD Cantre, University of Strathclyde, since the mid-1980s. Within this philos......Over the past decade "design assistance", that is, where the computer is viewed as an Intelligent Design Assistant (IDA), has emerged in knowledge based design support and has formed the basic research strategy for the CAD Cantre, University of Strathclyde, since the mid-1980s. Within...... this philosophy, an IDA would act as a colleague to a designer, providing guidance, learning from past experiences, carrying out semi- and fully-automated tasks, explaining its reasoning and in essence complementing the designer's own natural skills, and thus leaving the ultimate decision-making, control......, and responsibility with the designer.The ability to learn and evolve has been recognized as one of the key components of an IDA for it to fully support the designer's activities. Consequently, we have been directing our research effort on two main fronts, formalizing our understanding and developing models...

  4. Provider self-disclosure during contraceptive counseling.

    Science.gov (United States)

    McLean, Merritt; Steinauer, Jody; Schmittdiel, Julie; Chan, Pamela; Dehlendorf, Christine

    2017-02-01

    Provider self-disclosure (PSD) - defined as providers making statements regarding personal information to patients - has not been well characterized in the context of contraceptive counseling. In this study, we describe the incidence, content and context of contraceptive PSD. This mixed methods analysis used data from the Provider-Patient Contraceptive Counseling study, for which 349 family planning patients were recruited from 2009 to 2012 from six clinics in the San Francisco Bay Area. Audio-recordings from their visits were analyzed for the presence or absence of PSD, and those visits with evidence of PSD were analyzed using qualitative methods. The associations of patient and provider demographics and patient satisfaction measures, obtained from survey data, with PSD were analyzed using bivariable and multivariable analyses. Thirty-seven percent of providers showed evidence of PSD during at least one visit, and PSD occurred in 9% of clinic visits. Fifty-four percent of PSD statements were about intrauterine devices. About half of PSD statements occurred prior to the final selection of the contraceptive method and appeared to influence the choice of method. In post-visit surveys, all patients who reported receiving PSD considered it to be appropriate, and patient-reported PSD was not statistically associated with measures of patient satisfaction. This study provides some support for the appropriateness of PSD during family planning encounters, at least as practiced during the sampled visits. Further research could explore whether this counseling strategy has an impact on patients' ability to identify the best contraceptive methods for them. In this study, PSD did not have a demonstrated negative effect on the provider-patient relationship. In almost half of visits, PSD appeared to influence patients' choice of a method; whether this influence is beneficial needs further research. Copyright © 2017 Elsevier Inc. All rights reserved.

  5. Logistic service providers and sustainable physical distribution

    Directory of Open Access Journals (Sweden)

    Stef Weijers

    2012-06-01

    Full Text Available Background: Logistic Service Providers main concern was to ensure reliability for a low price (Christopher, 2005. Dutch Logistic Service Providers still have these two aspects at the top of their list, but also have to take in a new aspect: sustainability. 88% Of the investigated Logistic Service Providers have included sustainability in the company's goals. These Logistic Service Providers have developed different strategies to achieve a higher level of sustainability. This paper presents the results of a study into what Logistic Service Providers say what they are doing, or intend to do, to improve sustainability for their transport services. In this way insight is given in the attitude of Dutch Logistic Service Providers towards sustainability and how they intend to translate this into business practise: internal solutions or new methods incorporating external partners. Methods: Various methods of the investigations were used, among which the analysis of the statements about the sustainabilityon the websites of various companies as well as the questionnaire per Internet. The research covered 50 largest logistics companies operating in the Netherlands and 60 companies that competed for the award "Lean and Green" advertised in the Netherlands. In addition, the Internet survey was answered by 41 companies that belong to the network of our university. Results: The investigation has shown that sustainability is handled by the logistics company as an integral part of the corporate strategy. In contrast, shippers depend in the choice of logistics services primarily on such classical aspects as the reliability or the price and the sustainability play a minor role. Conclusions: Trying to find methods to improve the sustainability, Dutch logistics service providers, in the first place, look for solutions that increase the efficiency and therefore the cost reduction potential. Solutions, which require the involvement of clients, were less often

  6. Parent-provider communication during hospitalization.

    Science.gov (United States)

    Fisher, Mark J; Broome, Marion E

    2011-02-01

    Parents and health care providers interact and communicate with each other during a child's hospitalization. The purpose of this study was to compare communication experiences of parents, nurses, and physicians. A unique aspect of this study involved combining three individual data sources into a collective unit of study (triad). Triads involved in the care of three children in the inpatient setting of an urban children's hospital served as the sample for this study (n = 10). Participants were asked semistructured questions during face-to-face interviews. Findings included (a) the importance of providing information by health care providers using a caring and inclusive approach, (b) the benefits of establishing interpersonal connections and nurturing relationships, and (c) the identification of specific behaviors in all members of the triad that contribute to and sustain positively perceived communication. Future research directions examining triadic interactions, communication, and relationships among parents, nurses, and physicians are recommended. Copyright © 2011 Elsevier Inc. All rights reserved.

  7. 5th Annual Provider Software Buyer's Guide.

    Science.gov (United States)

    1995-03-01

    To help long term care providers find new ways to improve quality of care and efficiency, PROVIDER presents the fifth annual listing of software firms marketing computer programs for all areas of long term care operations. On the following five pages, more than 70 software firms display their wares, with programs such as minimum data set and care planning, dietary, accounting and financials, case mix, and medication administration records. The guide also charts compatible hardware, integration ability, telephone numbers, company contacts, and easy-to-use reader service numbers.

  8. Accountability Requirements in the Cloud Provider Chain

    Directory of Open Access Journals (Sweden)

    Martin Gilje Jaatun

    2018-04-01

    Full Text Available In order to be responsible stewards of other people’s data, cloud providers must be accountable for their data handling practices. The potential long provider chains in cloud computing introduce additional accountability challenges, with many stakeholders involved. Symmetry is very important in any requirements’ elicitation activity, since input from diverse stakeholders needs to be balanced. This article ventures to answer the question “How can one create an accountable cloud service?” by examining requirements which must be fulfilled to achieve an accountability-based approach, based on interaction with over 300 stakeholders.

  9. Provider Monitoring and Pay-for-Performance When Multiple Providers Affect Outcomes: An Application to Renal Dialysis

    Science.gov (United States)

    Hirth, Richard A; Turenne, Marc N; Wheeler, John RC; Pan, Qing; Ma, Yu; Messana, Joseph M

    2009-01-01

    Objective To characterize the influence of dialysis facilities and nephrologists on resource use and patient outcomes in the dialysis population and to illustrate how such information can be used to inform payment system design. Data Sources Medicare claims for all hemodialysis patients for whom Medicare was the primary payer in 2004, combined with the Medicare Enrollment Database and the CMS Medical Evidence Form (CMS Form 2728), which is completed at onset of renal replacement therapy. Study Design Resource use (mainly drugs and laboratory tests) per dialysis session and two clinical outcomes (achieving targets for anemia management and dose of dialysis) were modeled at the patient level with random effects for nephrologist and dialysis facility, controlling for patient characteristics. Results For each measure, both the physician and the facility had significant effects. However, facilities were more influential than physicians, as measured by the standard deviation of the random effects. Conclusions The success of tools such as P4P and provider profiling relies upon the identification of providers most able to enhance efficiency and quality. This paper demonstrates a method for determining the extent to which variation in health care costs and quality of care can be attributed to physicians and institutional providers. Because variation in quality and cost attributable to facilities is consistently larger than that attributable to physicians, if provider profiling or financial incentives are targeted to only one type of provider, the facility appears to be the appropriate locus. PMID:19555398

  10. Emerging industrial countries provide the sale opportunities

    International Nuclear Information System (INIS)

    Dzhefs, Eh.; Grinkhal, G.

    1982-01-01

    Main trends in the development of nuclear power engineering in capitalist countries are considred. A particular attention is paid to a sharp contrast in the attitude to nuclear engineering in the developed and developing countries. In the first ones a considerable influence on the realization of nuclear engineering programs is exerted by the political situation, in the second ones the tendency to a transition from the NPP import to an increase in domestic industry contribution designing and fabricating separate plant units, equipment and fuel is clearly manifested

  11. SLIA beam line design

    International Nuclear Information System (INIS)

    Petillo, J.; Chernin, D.; Kostas, C.; Mondelli, A.

    1990-01-01

    The Spiral Line Induction Accelerator (SLIA) is a multi-kiloampere compact electron accelerator. It uses linear induction accelerator modules on the straight sections of a racetrack spiral, with strong-focusing bends to recirculate the electrons. The strong focusing is provided by stellarator windings on the bends. Stellarator coils are used to provide the strong focusing on the bends. The matching of the electron beam from a diode through a series of accelerator modules and stellarator bends is a major issue in the design of this accelerator. The beam line design for a proof-of-concept SLIA experiment (10 kA, 7 MeV) to be carried out at Pulse Sciences, Inc. will be presented. The design will demonstrate beam matching from element to element in the focusing system, the design of an achromatic bend, and the requirements for avoiding collective instabilities

  12. ARE INCLUSIVE DESIGNERS DESIGNING INCLUSIVELY?

    DEFF Research Database (Denmark)

    Herriott, Richard

    2013-01-01

    of activity conforming to an authoritative design method. Analysis of the result showed that of the 66 cases, 4.5% reported carrying out all six categories of activity. 39.3% carried out or reported just one step. The study also found that the predominant focus of reported design activity is in the initial...

  13. Designing Users/Designing Innovation

    DEFF Research Database (Denmark)

    The paper addresses issues of user conceptualisation and representation in the processes of designing and innovating artifacts and use-practices. It is informed by early as well as more recent insights from technology studies within the new sociology of technology (e.g. Akrich 1995, Bijker & Law...... and competencies. Characteristic of these projects are the interplay between the social and the technical dimensions in the process of product development, and the students are expected to apply socio-technical methodologies in their strategies. The students’ need to inform the design through iteratively...... themes ranging from user-oriented design to product redesign and workspace design, etc. It is expected that some of the insights gained from these projects may be related outside of the immediate context of the classroom, to inform the notion of competencies in engineering design and sociotechnical...

  14. Outpatient provider concentration and commercial colonoscopy prices.

    Science.gov (United States)

    Pozen, Alexis

    2015-01-01

    The objective was to evaluate the magnitude of various contributors to outpatient commercial colonoscopy prices, including market- and provider-level factors, especially market share. We used adjudicated fee-for-service facility claims from a large commercial insurer for colonoscopies occurring in hospital outpatient department or ambulatory surgery center from October 2005 to December 2012. Claims were matched to provider- and market-level data. Linear fixed effects regressions of negotiated colonoscopy price were run on provider, system, and market characteristics. Markets were defined as counties. There were 178,433 claims from 169 providers (104 systems). The mean system market share was 76% (SD = 0.34) and the mean real (deflated) price was US$1363 (SD = 374), ranging from US$169 to US$2748. For every percentage point increase in a system or individual facility's bed share, relative price increased by 2 to 4 percentage points; this result was stable across a number of specifications. Market population and price were also consistently positively related, though this relation was small in magnitude. No other factor explained price as strongly as market share. Price variation for colonoscopy was driven primarily by market share, of particular concern as the number of mergers increases in wake of the recession and the Affordable Care Act. Whether variation is justified by better quality care requires further research to determine whether quality is subsumed in prices. © The Author(s) 2015.

  15. Intentional Planning to Provide Technology to Students

    Science.gov (United States)

    Flagg-Williams, Joan B.; Rey, Janice M.

    2016-01-01

    Mobile technology plays a prominent role in teaching and learning. To address this vital component of teacher preparation, the education department of a small college provided the freshman class with iPads. iPads were selected because they are common in public schools, lightweight, portable, touch-screen controlled and have an abundance of…

  16. Provider expectations and father involvement: learning from ...

    African Journals Online (AJOL)

    2013-12-17

    Dec 17, 2013 ... in Gauteng's poor and black communities with fathers that did not ... affect fathers' ability to live up to provider expectations. ... On the contrary, father absence can exacerbate household poverty and “can ... socio-emotional development of the children, although such effects are not uniformly .... explanation.

  17. Providing anesthesia in resource-limited settings.

    Science.gov (United States)

    Dohlman, Lena E

    2017-08-01

    The article reviews the reality of anesthetic resource constraints in low and middle-income countries (LMICs). Understanding these limitations is important to volunteers from high-income countries who desire to teach or safely provide anesthesia services in these countries. Recently published information on the state of anesthetic resources in LMICs is helping to guide humanitarian outreach efforts from high-income countries. The importance of using context-appropriate anesthesia standards and equipment is now emphasized. Global health experts are encouraging equal partnerships between anesthesia health care providers working together from different countries. The key roles that ketamine and regional anesthesia play in providing well tolerated anesthesia for cesarean sections and other common procedures is increasingly recognized. Anesthesia can be safely given in LMICs with basic supplies and equipment, if the anesthesia provider is trained and vigilant. Neuraxial and regional anesthesia and the use of ketamine as a general anesthetic appear to be the safest alternatives in low-resource countries. Environmentally appropriate equipment should be encouraged and pulse oximeters should be in every anesthetizing location. LMICs will continue to need support from outside sources until capacity building has made more progress.

  18. Experiences of healthcare providers managing sexual assault ...

    African Journals Online (AJOL)

    Experiences of healthcare providers managing sexual assault victims in the emergency unit Part 2: Discussion of results and literature control. ... It was recommended that members of the multidisciplinary team engage in community activities and that the community participate in matters pertaining to sexual assault.

  19. Providing Career Guidance for Young Women.

    Science.gov (United States)

    Colby, Pamela G.

    This module is directed at personnel working or planning to work in the areas of guidance, counseling, placement and follow-through in junior and senior high school settings, grades 7-12. The module topic is career guidance for young women of junior and senior high school age, aand the focus will be on providing nonbiased career guidance which…

  20. 78 FR 14034 - Health Insurance Providers Fee

    Science.gov (United States)

    2013-03-04

    ... Health Insurance Providers Fee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of... insurance for United States health risks. This fee is imposed by section 9010 of the Patient Protection and... insurance for United States health risks. DATES: Written or electronic comments must be received by June 3...

  1. 42 CFR 410.134 - Provider qualifications.

    Science.gov (United States)

    2010-10-01

    ... after December 22, 2000: (a) Holds a bachelor's or higher degree granted by a regionally accredited college or university in the United States (or an equivalent foreign degree) with completion of the... PROGRAM SUPPLEMENTARY MEDICAL INSURANCE (SMI) BENEFITS Medical Nutrition Therapy § 410.134 Provider...

  2. System 80+trademark Standard Design: CESSAR design certification

    International Nuclear Information System (INIS)

    1990-01-01

    This report, entitled Combustion Engineering Standard Safety Analysis Report -- Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describes the Combustion Engineering, Inc. System 80+trademark Standard Design. This Volume 17 provides Appendix A of this report, closure of unresolved and Genetic Safety Issues

  3. System 80+trademark Standard Design: CESSAR design certification

    International Nuclear Information System (INIS)

    1990-01-01

    This report, entitled Combustion Engineering Standard Safety Analysis Report -- Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describe the Combustion Engineering, Inc. System 80 + trademark Standard Design. This volume 8 provides a description of instrumentation and controls

  4. System 80+trademark Standard Design: CESSAR design certification

    International Nuclear Information System (INIS)

    1990-01-01

    This report, entitled Combustion Engineering Standard Safety Analysis Report -- Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describe the Combustion Engineering, Inc. System 80+trademark Standard Design. This Volume 18 provides Appendix B, Probabilistic Risk Assessment

  5. Utilization of Smartphone Applications by Anesthesia Providers

    Directory of Open Access Journals (Sweden)

    Michael S. Green

    2018-01-01

    Full Text Available Health care-related apps provide valuable facts and have added a new dimension to knowledge sharing. The purpose of this study is to understand the pattern of utilization of mobile apps specifically created for anesthesia providers. Smartphone app stores were searched, and a survey was sent to 416 anesthesia providers at 136 anesthesiology residency programs querying specific facets of application use. Among respondents, 11.4% never used, 12.4% used less than once per month, 6.0% used once per month, 12.1% used 2-3 times per month, 13.6% used once per week, 21% used 2-3 times per week, and 23.5% used daily. Dosage/pharmaceutical apps were rated the highest as most useful. 24.6% of the participants would pay less than $2.00, 25.1% would pay $5.00, 30.3% would pay $5–$10.00, 9.6% would pay $10–$25.00, 5.1% would pay $25–$50.00, and 5.1% would pay more than $50.00 if an app saves 5–10 minutes per day or 30 minutes/week. The use of mobile phone apps is not limited to reiterating information from textbooks but provides opportunities to further the ever-changing field of anesthesiology. Our survey illustrates the convenience of apps for health care professionals. Providers must exercise caution when selecting apps to ensure best evidence-based medicine.

  6. DESIGN FOR SIX SIGMA

    Directory of Open Access Journals (Sweden)

    Liem Ferryanto

    2007-01-01

    Full Text Available This article provides a step by step process of executing analytical or computer based Design for Six Sigma using a Sliding Door project as an example. It comprises of identification of Voice Of the Customer (VOC, transformation of VOC to what it is called Critical To Quality characteristics (CTQs, modeling of system transfers function, optimal and robust solutions, and tolerance design approach

  7. Designing the molecular future

    OpenAIRE

    Schneider Gisbert

    2011-01-01

    Approximately 25 years ago the first computer applications were conceived for the purpose of automated 'de novo' drug design prominent pioneering tools being ALADDIN CAVEAT GENOA and DYLOMMS. Many of these early concepts were enabled by innovative techniques for ligand receptor interaction modeling like GRID MCSS DOCK and CoMFA which still provide the theoretical framework for several more recently developed molecular design algorithms. After a first wave of software tools and groundbreaking ...

  8. Designing Organizations

    DEFF Research Database (Denmark)

    Book Description The design of organizations has been an ongoing concern of management theory and practice over the past several decades. Over this time, there has been little change in the fundamental theory, principles and concepts of Organization Design (OD). Recently organizational life has...... changed dramatically with the advent of: new communication systems, adaptive mechanisms, information technology, knowledge management systems, innovation processes and more. This book systemically examines these developments and their impact on OD with contributions from leading scholars in the area...... is a benchmark publication in the field of organization design. By focusing on recent developments in organization design, this book will help to create more thoughtful research and stronger empirical analyses in this important area of management and organization....

  9. Designing Organizations

    DEFF Research Database (Denmark)

    changed dramatically with the advent of: new communication systems, adaptive mechanisms, information technology, knowledge management systems, innovation processes and more. This book systemically examines these developments and their impact on OD with contributions from leading scholars in the area....... The individual chapters are organized into five sections: (1) Putting Contingency Theory in its Place, (2) Focus on Individuals who make up the Organization, (3) Innovation Processes and Organization Design, (4) Adaptation and Technology, and (5) Design for Performance. Each chapter examines aspects of the books...... is a benchmark publication in the field of organization design. By focusing on recent developments in organization design, this book will help to create more thoughtful research and stronger empirical analyses in this important area of management and organization....

  10. Design '82

    International Nuclear Information System (INIS)

    1982-01-01

    The papers in the symposium cover many aspects of the economy and effectiveness of chemical engineering design in industrial plants. Among the topics dealt with are the special problems associated with nuclear reprocessing plants. (U.K.)

  11. Persuasiv design

    DEFF Research Database (Denmark)

    Hasle, Per

    2011-01-01

    Purpose – The purpose of this paper is to introduce the theme issue on “Persuasive design”. Design/methodology/approach – This editorial describes the essential ideas and purposes of persuasive design (PD). PD's relation to other IT‐disciplines and rhetoric in general is discussed. A special...... to rhetoric and the concomitant implications for library and information systems is largely original (when compared with other discussions of PD)....

  12. Mechanical design

    Science.gov (United States)

    1976-01-01

    Design concepts for a 1000 mw thermal stationary power plant employing the UF6 fueled gas core breeder reactor are examined. Three design combinations-gaseous UF6 core with a solid matrix blanket, gaseous UF6 core with a liquid blanket, and gaseous UF6 core with a circulating blanket were considered. Results show the gaseous UF6 core with a circulating blanket was best suited to the power plant concept.

  13. ETF interim design review

    International Nuclear Information System (INIS)

    Steiner, D.; Rutherford, P.H.

    1980-01-01

    A three-day ETF Interim Design Review was conducted on July 23-25, 1980, at the Sheraton Potomac Inn in Rockville, Maryland. The intent of the review was to provide a forum for an in-depth assessment and critique of all facets of the ETF design by members of the fusion community. The review began with an opening plenary session at which an overview of the ETF design was presented by D. Steiner, manager of the ETF Design Center, complemented by a physics overview by P.H. Rutherford, chairman of the ETF/INTOR Physics Committee. This was followed by six concurrent review sessions over the next day and a half. The review closed with a plenary session at which the Design Review Board presented its findings. This document consists of the viewgraphs for the opening plenary session and an edited version of the presentations made by Steiner and Rutherford

  14. FMIF conceptual design activities

    Energy Technology Data Exchange (ETDEWEB)

    Green, L.; Lance, J. [Westinghouse Science & Technology Center, Pittsburgh, PA (United States); Rathke, J.; Reusch, M.; Todd, A.; Bruhwiler, D. [Northrop Grumman Corp., Bethpage, NY (United States); Bazinet, J. [Westinghouse Hanford Co., Richland, WA (United States); Piechowiak, E. [Westinghouse ESG, Baltimore, MD (United States); Thomson, S. [Bechtel National Inc., Oak Ridge, TN (United States)

    1994-11-01

    A scoping design study was performed for a Fusion Materials Irradiation Facility (FMIF). This work summarizes the industry contribution to the national effort. Other organizations involved have included the DOE and national laboratories, as well as the industrial partners. The objective of this work was to obtain a general facility layout incorporating advances in accelerator technology and beam optics design and control since the FMIT design was done, and an associated scoping cost estimate. The baseline design has two beamlines each delivering 125 mA of 35 MeV deuterons onto one of two flowing liquid lithium targets. The system has been designed for a future upgrade to four beamlines delivering up to a total of 500 mA on target. This system can provide an equivalent 14 MeV neutron flux of 2 MW/m{sup 2} in a volume greater than one liter at a flux gradient of less than 10% per centimeter.

  15. FMIF conceptual design activities

    International Nuclear Information System (INIS)

    Green, L.; Lance, J.; Rathke, J.; Reusch, M.; Todd, A.; Bruhwiler, D.; Bazinet, J.; Piechowiak, E.; Thomson, S.

    1994-01-01

    A scoping design study was performed for a Fusion Materials Irradiation Facility (FMIF). This work summarizes the industry contribution to the national effort. Other organizations involved have included the DOE and national laboratories, as well as the industrial partners. The objective of this work was to obtain a general facility layout incorporating advances in accelerator technology and beam optics design and control since the FMIT design was done, and an associated scoping cost estimate. The baseline design has two beamlines each delivering 125 mA of 35 MeV deuterons onto one of two flowing liquid lithium targets. The system has been designed for a future upgrade to four beamlines delivering up to a total of 500 mA on target. This system can provide an equivalent 14 MeV neutron flux of 2 MW/m 2 in a volume greater than one liter at a flux gradient of less than 10% per centimeter

  16. Beam director design report

    International Nuclear Information System (INIS)

    Younger, F.C.

    1986-08-01

    A design and fabrication effort for a beam director is documented. The conceptual design provides for the beam to pass first through a bending and focusing system (or ''achromat''), through a second achromat, through an air-to-vacuum interface (the ''beam window''), and finally through the vernier steering system. Following an initial concept study for a beam director, a prototype permanent magnet 30 0 beam-bending achromat and prototype vernier steering magnet were designed and built. In volume II, copies are included of the funding instruments, requests for quotations, purchase orders, a complete set of as-built drawings, magnetic measurement reports, the concept design report, and the final report on the design and fabrication project

  17. Real-time water quality monitoring and providing water quality ...

    Science.gov (United States)

    EPA and the U.S. Geological Survey (USGS) have initiated the “Village Blue” research project to provide real-time water quality monitoring data to the Baltimore community and increase public awareness about local water quality in Baltimore Harbor and the Chesapeake Bay. The Village Blue demonstration project complements work that a number of state and local organizations are doing to make Baltimore Harbor “swimmable and fishable” 2 by 2020. Village Blue is designed to build upon EPA’s “Village Green” project which provides real-time air quality information to communities in six locations across the country. The presentation, “Real-time water quality monitoring and providing water quality information to the Baltimore Community”, summarizes the Village Blue real-time water quality monitoring project being developed for the Baltimore Harbor.

  18. The Columbia Earth Institute : designing strategies and providing innovations for the wise stewardship of our planet

    International Nuclear Information System (INIS)

    Eisenberger, P.

    1997-01-01

    The view of Columbia University's Earth Institute for meeting the global warming challenge was described. According to this view, the challenges require global engineering, global mitigation and global planning. It was suggested that one way to address the problem is for institutions of higher learning to become aware that the different systems in the world are very connected and affect each other more than previously thought. Physical sciences, such as chemistry and physics, and the ecological or biological sciences should be portrayed as connected disciplines. Our understanding of nature depends on a balanced view between hard sciences and social sciences, yet students are rarely exposed to both. The Earth Institute at Columbia University is trying to break down the disciplinary boundaries within the university in an effort to better understand the interactions between the different systems and to come up with a comprehensive, 'from science-to-policy' perspective

  19. Providing Training Enhances the Biomechanical Improvements of an Alternative Computer Mouse Design

    NARCIS (Netherlands)

    Houwink, A.; Oude Hengel, K.M.; Odell, D.; Dennerlein, J.T.

    2009-01-01

    Objective: The purpose of this study is to determine if an alternative mouse promotes more neutral postures and decreases forearm muscle activity and if training enhances these biomechanical benefits. Background: Computer mouse use is a risk factor for developing musculoskeletal disorders;

  20. Local Flexibility Market Design for Aggregators Providing Multiple Flexibility Services at Distribution Network Level

    Directory of Open Access Journals (Sweden)

    Pol Olivella-Rosell

    2018-04-01

    Full Text Available This paper presents a general description of local flexibility markets as a market-based management mechanism for aggregators. The high penetration of distributed energy resources introduces new flexibility services like prosumer or community self-balancing, congestion management and time-of-use optimization. This work is focused on the flexibility framework to enable multiple participants to compete for selling or buying flexibility. In this framework, the aggregator acts as a local market operator and supervises flexibility transactions of the local energy community. Local market participation is voluntary. Potential flexibility stakeholders are the distribution system operator, the balance responsible party and end-users themselves. Flexibility is sold by means of loads, generators, storage units and electric vehicles. Finally, this paper presents needed interactions between all local market stakeholders, the corresponding inputs and outputs of local market operation algorithms from participants and a case study to highlight the application of the local flexibility market in three scenarios. The local market framework could postpone grid upgrades, reduce energy costs and increase distribution grids’ hosting capacity.

  1. Why a well-designed HR shared service provider fails to create end-user value?

    NARCIS (Netherlands)

    Meijerink, Jeroen Gerard; Bondarouk, Tatiana; Looise, Jan C.

    2011-01-01

    Human resource shared services centres (HR SSCs) are foreseen as improving HR service delivery for their end-users: employees, line managers and decentralized HR professionals. Although the concept expects the benefits of HR SSCs to come from centralizing knowledge and decentralizing the control

  2. SPACEWAY: Providing affordable and versatile communication solutions

    Science.gov (United States)

    Fitzpatrick, E. J.

    1995-08-01

    By the end of this decade, Hughes' SPACEWAY network will provide the first interactive 'bandwidth on demand' communication services for a variety of applications. High quality digital voice, interactive video, global access to multimedia databases, and transborder workgroup computing will make SPACEWAY an essential component of the computer-based workplace of the 21st century. With relatively few satellites to construct, insure, and launch -- plus extensive use of cost-effective, tightly focused spot beams on the world's most populated areas -- the high capacity SPACEWAY system can pass its significant cost savings onto its customers. The SPACEWAY network is different from other proposed global networks in that its geostationary orbit location makes it a truly market driven system: each satellite will make available extensive telecom services to hundreds of millions of people within the continuous view of that satellite, providing immediate capacity within a specific region of the world.

  3. The EU as an international security provider

    DEFF Research Database (Denmark)

    Rodt, Annemarie Peen; Wolff, Stefan; Whitman, Richard

    2015-01-01

    This contribution develops a framework of analysis that covers the actors involved in the policy making process of international security provision, the dynamics of this process itself, its outcomes (concrete strategies and policies) and their impact. Our efforts to establish such a framework...... of analysis, which could serve as the foundation for a mid-range theory of the EU as an international security provider, will examine the relevance of, and apply, existing theories of international relations/international security and foreign policy analysis to the specific case of the EU. The framework...... that will emerge from this analysis will then be tested and applied empirically in the following contributions that focus on how particular policies are formulated and implemented, and that analyse, in single and comparative case studies, the impact and effectiveness of the EU as an international security provider....

  4. Informed consent - Providing information about prenatal examinations

    DEFF Research Database (Denmark)

    Dahl, Katja; Kesmodel, Ulrik; Hvidman, Lone

    as well.The review is based on systematic search strategy in the electronic databases Medline and Science Citation. Additional studies were identified through reference lists of individual papers obtained. Improving knowledge scores and reducing decisional conflict can be obtained by group counselling...... pregnant women about prenatal examinations. Women's knowledge, decisional conflict, satisfaction and anxiety will be explored as compared with different ways and different groups of health professionals providing information. To what extent information empowers informed decision making will be explored...

  5. Providing Device Independence to Mobile Services

    OpenAIRE

    Nylander, Stina; Bylund, Markus

    2002-01-01

    People want user interfaces to services that are functional and well suited to the device they choose for access. To provide this, services must be able to offer device specific user interfaces for the wide range of devices available today. We propose to combine the two dominant approaches to platform independence, "Write Once, Run Every-where™" and "different version for each device", to create multiple device specific user interfaces for mobile services. This gives possibilities to minimize...

  6. Research utilization among children's mental health providers

    Directory of Open Access Journals (Sweden)

    Ferguson H Bruce

    2008-04-01

    Full Text Available Abstract Background Children with emotional and behavioural disorders should be able to count on receiving care that meets their needs and is based on the best scientific evidence available, however, many do not receive these services. Implementation of evidence-based practice (EBP relies, in part, on the research utilization practices of mental health care providers. This study reports on a survey of research utilization practices among 80 children's mental health (CMH service provider organizations in Ontario, Canada. Methods A web-based survey was distributed to 80 CMH service provider organizations, to which 51 executive directors and 483 children's mental health practitioners responded. Research utilization was assessed using questions with Likert-type responses based on the Canadian Health Services Research Foundation's Four-A's approach: access, assess, adapt, apply. Results There was general agreement among executive directors and practitioners regarding the capacity of their organizations to use – access, assess, adapt, and apply – research evidence. Overall, both groups rated their organizations as using research information 'somewhat well.' The low response rate to the practitioner survey should be noted. Conclusion These findings provide a useful benchmark from which changes in reported research utilization in the Ontario CMH sector can be tracked over time, as a function of EBP training and implementation initiatives, for instance. The need to improve access to research evidence should be addressed because it relates to the eventual implementation and uptake of evidence-based practices. Communities of practice are recommended as a strategy that would enable practitioners to build capacity in their adaptation and application of research evidence.

  7. Research utilization among children's mental health providers.

    Science.gov (United States)

    Barwick, Melanie A; Boydell, Katherine M; Stasiulis, Elaine; Ferguson, H Bruce; Blase, Karen; Fixsen, Dean

    2008-04-09

    Children with emotional and behavioural disorders should be able to count on receiving care that meets their needs and is based on the best scientific evidence available, however, many do not receive these services. Implementation of evidence-based practice (EBP) relies, in part, on the research utilization practices of mental health care providers. This study reports on a survey of research utilization practices among 80 children's mental health (CMH) service provider organizations in Ontario, Canada. A web-based survey was distributed to 80 CMH service provider organizations, to which 51 executive directors and 483 children's mental health practitioners responded. Research utilization was assessed using questions with Likert-type responses based on the Canadian Health Services Research Foundation's Four-A's approach: access, assess, adapt, apply. There was general agreement among executive directors and practitioners regarding the capacity of their organizations to use - access, assess, adapt, and apply - research evidence. Overall, both groups rated their organizations as using research information 'somewhat well.' The low response rate to the practitioner survey should be noted. These findings provide a useful benchmark from which changes in reported research utilization in the Ontario CMH sector can be tracked over time, as a function of EBP training and implementation initiatives, for instance. The need to improve access to research evidence should be addressed because it relates to the eventual implementation and uptake of evidence-based practices. Communities of practice are recommended as a strategy that would enable practitioners to build capacity in their adaptation and application of research evidence.

  8. PROVIDING QUALITY – A KEY TO SUCCESS

    OpenAIRE

    Oana Staiculescu; Angel-Cristian Staiculescu

    2012-01-01

    Providing a high quality products and services is a key to business success. That is because high quality promotes customer satisfaction and customer satisfaction has a direct link to business revenue. Clients want quality products and services in order to feel they are getting value for money, especially in these hard economic times. Although it is well known that advertising may win new customers, quality can be the reason to keep them. A good manager is aware that the costs of winning mark...

  9. Outsourcing gets providers back to the basics.

    Science.gov (United States)

    Watson, S

    1995-05-01

    Information technology is advancing so quickly that many organizations can't keep up. That's why demand for the outsourcing of data processing functions is growing as providers and payers attempt to implement the latest technology while holding costs down. Those investigating outsourcing must carefully scrutinize whether an arrangement actually will cut costs, experts advise. And clients should review contract terms to ensure all expectations are spelled out.

  10. Providing Real Research Opoportunities to Undergraduates

    Science.gov (United States)

    Ragozzine, Darin

    2016-01-01

    The current approach to undergraduate education focuses on teaching classes which provide the foundational knowledge for more applied experiences such as scientific research. Like most programs, Florida Institute of Technology (Florida Tech or FIT) strongly encourages undergraduate research, but is dominated by content-focused courses (e.g., "Physical Mechanics"). Research-like experiences are generally offered through "lab" classes, but these are almost always reproductions of past experiments: contrived, formulaic, and lacking the "heart" of real (i.e., potentially publishable) scientific research. Real research opportunities 1) provide students with realistic insight into the actual scientific process; 2) excite students far more than end-of-chapter problems; 3) provide context for the importance of learning math, physics, and astrophysics concepts; and 4) allow unique research progress for well-chosen problems. I have provided real research opportunities as an "Exoplanet Lab" component of my Introduction to Space Science (SPS1020) class at Florida Tech, generally taken by first-year majors in our Physics, Astronomy & Astrophysics, Planetary Science, and Astrobiology degree programs. These labs are a hybrid between citizen science (e.g., PlanetHunters) and simultaneously mentoring ~60 undergraduates in similar small research projects. These projects focus on problems that can be understood in the context of the course, but which benefit from "crowdsourcing". Examples include: dividing up the known planetary systems and developing a classification scheme and organizing them into populations (Fall 2013); searching through folded light curves to discover new exoplanets missed by previous pipelines (Fall 2014); and fitting n-body models to all exoplanets with known Transit Timing Variations to estimate planet masses (Fall 2015). The students love the fact that they are doing real potentially publishable research: not many undergraduates can claim to have discovered

  11. Offshore Outsourcing Induced by Domestic Providers

    OpenAIRE

    Yutian Chen; Pradeep Dubey; Debapriya Sen

    2005-01-01

    We show that offshore outsourcing can occur even when there are no economies of scale or cost advantages for the foreign firms. What drives the phenomenon is that domestic firms, by accepting orders for intermediate goods, incur the disadvantage of becoming Stackelberg followers in the ensuing competition to sell the final good. Thus they have incentive to quote high provider prices to ward off future competitors, compelling them to outsource offshore.

  12. Providing Music Notation Services over Internet

    OpenAIRE

    Solomon , Mike; Fober , Dominique; Orlarey , Yann; Letz , Stéphane

    2014-01-01

    International audience; The GUIDO project gathers a textual format for music representation, a rendering engine operating on this format, and a library providing a high level support for all the services related to the GUIDO format and it's graphic rendering. The project includes now an HTTP server that allows users to access the musical-score-related functions in the API of the GUIDOEngine library via uniform resource identifiers (URIs). This article resumes the core tenants of the REST arch...

  13. ACCOUNTING TREATMENTS USED FOR ACCOUNTING SERVICES PROVIDERS

    OpenAIRE

    ŢOGOE GRETI DANIELA; AVRAM MARIOARA; AVRAM COSTIN DANIEL

    2014-01-01

    The theme of our research is the ways of keeping accounting entities that are the object of the provision of services in the accounting profession. This paper aims to achieve a parallel between the ways of organizing financial records - accounting provided by freelancers and companies with activity in the financial - accounting. The first step in our scientific research is to establish objectives chosen area of scientific knowledge. Our scientific approach seeks to explain thr...

  14. Providing Technical assistance on corruption control

    OpenAIRE

    Serge, Lortie

    2012-01-01

    The phenomenon referred to as corruption has now been generating a high degree of interest for over twenty years. It has in fact spawned not only an abundant literature but also a monitoring and advisory industry whose specific outlook heavily shapes the debate on integrity issues. This industry is widely supported by aid providers, be it the international financing institutions or national development agencies. At this juncture, it therefore seemed worthwhile to examine more critically an ar...

  15. ACCOUNTING TREATMENTS USED FOR ACCOUNTING SERVICES PROVIDERS

    Directory of Open Access Journals (Sweden)

    ŢOGOE GRETI DANIELA

    2014-08-01

    Full Text Available The theme of our research is the ways of keeping accounting entities that are the object of the provision of services in the accounting profession. This paper aims to achieve a parallel between the ways of organizing financial records - accounting provided by freelancers and companies with activity in the financial - accounting. The first step in our scientific research is to establish objectives chosen area of scientific knowledge. Our scientific approach seeks to explain through a thorough and detailed approach as different sides (conceptual and practical looking projections of accounting issues related to regulatory developments and practices in the field. This paper addresses various concepts, accounting treatments, and books and accounting documents used both freelancers in providing accounting services and legal persons authorized accounting profession. In terms of methodology and research perspective, the whole scientific approach combined with quantitative and qualitative research theoretical perspective (descriptive-conceptual with practice perspective (empirical analyzing the main contributions of various authors (Romanian and foreign to knowledge in the field. Following the survey believe that the amendments to the national legislation will support entities providing accounting services, by cutting red tape on Administrative Burdens, and consequently will increase profitability and increase service quality.

  16. Patients Provide Recommendations for Improving Patient Satisfaction.

    Science.gov (United States)

    Moore, Angelo D; Hamilton, Jill B; Krusel, Jessica L; Moore, LeeAntoinette G; Pierre-Louis, Bosny J

    2016-04-01

    National Committee for Quality Assurance recommends patient-centered medical homes incorporate input from patient populations; however, many health care organizations do not. This qualitative study used two open-ended questions from 148 active duty Army Soldiers and their family members to illicit recommendations for primary care providers and clinic leadership that would improve their health care experiences. Content analysis and descriptive statistics were used to analyze responses. Participant responses were related to four major themes: Access to Care, Interpersonal Interaction, Satisfaction of Care, and Quality of Care. Participants were overall satisfied with their care; however, spending less time waiting for appointments and to see the provider or specialist were the most frequently requested improvements related to Access to Care. For Interpersonal Interaction, 82% of the responses recommended that providers be more attentive listeners, courteous, patient, caring, and respectful. Decreasing wait times and improving interpersonal skills would improve health care experiences and patient satisfaction. Reprint & Copyright © 2016 Association of Military Surgeons of the U.S.

  17. Mitigating Provider Uncertainty in Service Provision Contracts

    Science.gov (United States)

    Smith, Chris; van Moorsel, Aad

    Uncertainty is an inherent property of open, distributed and multiparty systems. The viability of the mutually beneficial relationships which motivate these systems relies on rational decision-making by each constituent party under uncertainty. Service provision in distributed systems is one such relationship. Uncertainty is experienced by the service provider in his ability to deliver a service with selected quality level guarantees due to inherent non-determinism, such as load fluctuations and hardware failures. Statistical estimators utilized to model this non-determinism introduce additional uncertainty through sampling error. Inability of the provider to accurately model and analyze uncertainty in the quality level guarantees can result in the formation of sub-optimal service provision contracts. Emblematic consequences include loss of revenue, inefficient resource utilization and erosion of reputation and consumer trust. We propose a utility model for contract-based service provision to provide a systematic approach to optimal service provision contract formation under uncertainty. Performance prediction methods to enable the derivation of statistical estimators for quality level are introduced, with analysis of their resultant accuracy and cost.

  18. Do burn centers provide juvenile firesetter intervention?

    Science.gov (United States)

    Ahrns-Klas, Karla S; Wahl, Wendy L; Hemmila, Mark R; Wang, Stewart C

    2012-01-01

    Juvenile firesetting activity accounts for a significant number of annual injuries and property damage, yet there is sparse information on intervention in the burn literature. To quantify juvenile firesetting intervention (JFSI) in burn centers, a 23-question survey was sent to all directors listed in the American Burn Association Burn Care Facilities Directory.Sixty-four out of 112 (57%) surveys were returned. This represents responses from 79% of currently verified burn centers. When queried on interventions provided to a juvenile firesetter admitted to their unit, 38% report having their own JFSI program and 38% refer the child to fire services. Two thirds of units without a JFSI program treat pediatric patients. Units that previously had a JFSI program report lack of staffing and funding as most common reasons for program discontinuation. Almost all (95%) stated that a visual tool demonstrating legal, financial, social, future, and career ramifications associated with juvenile firesetting would be beneficial to their unit. Many burn units that treat pediatric patients do not have JFSI and rely on external programs operated by fire services. Existing JFSI programs vary greatly in structure and method of delivery. Burn centers should be involved in JFSI, and most units would benefit from a new video toolkit to assist in providing appropriate JFSI. Study results highlight a need for burn centers to collaborate on evaluating effectiveness of JFSI programs and providing consistent intervention materials based on outcomes research.

  19. Supercapacitor to Provide Ancillary Services: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Muljadi, Eduard [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Gevorgian, Vahan [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Luo, Yusheng [Idaho National Laboratory; Mohanpurkar, M. [Idaho National Laboratory; Hovsapian, R. [Idaho National Laboratory; Koritarov, V. [Argonne National Laboratory

    2017-10-09

    Supercapacitor technology has reached a level of maturity as a viable energy storage option available to support a modern electric power system grid; however, its application is still limited because of its energy capacity and the cost of the commercial product. In this paper, we demonstrate transient models of supercapacitor energy storage plants operating in coordination with run-of-the-river (ROR), doubly-fed induction generator hydropower plants (HPP) using a system control concept and architecture developed. A detailed transient model of a supercapacitor energy storage device is coupled with the grid via a three-phase inverter/rectifier and bidirectional DC-DC converter. In addition, we use a version of a 14-bus IEEE test case that includes the models of the supercapacitor energy storage device, ROR HPPs, and synchronous condensers that use the rotating synchronous generators of retired coal-powered plants. The purpose of the synchronous condensers is to enhance the system stability by providing voltage and reactive power control, provide power system oscillations damping, and maintain system inertia at secure levels. The control layer provides coordinated, decentralized operation of distributed ROR HPPs and energy storage as aggregate support to power system operations.

  20. Provider volume and outcomes for oncological procedures.

    LENUS (Irish Health Repository)

    Killeen, S D

    2012-02-03

    BACKGROUND: Oncological procedures may have better outcomes if performed by high-volume providers. METHODS: A review of the English language literature incorporating searches of the Medline, Embase and Cochrane collaboration databases was performed. Studies were included if they involved a patient cohort from 1984 onwards, were community or population based, and assessed health outcome as a dependent variable and volume as an independent variable. The studies were also scored quantifiably to assess generalizability with respect to any observed volume-outcome relationship and analysed according to organ system; numbers needed to treat were estimated where possible. RESULTS: Sixty-eight relevant studies were identified and a total of 41 were included, of which 13 were based on clinical data. All showed either an inverse relationship, of variable magnitude, between provider volume and mortality, or no volume-outcome effect. All but two clinical reports revealed a statistically significant positive relationship between volume and outcome; none demonstrated the opposite. CONCLUSION: High-volume providers have a significantly better outcome for complex cancer surgery, specifically for pancreatectomy, oesphagectomy, gastrectomy and rectal resection.

  1. Designing for user engagement

    CERN Document Server

    Geisler, Cheryl

    2013-01-01

    Designing for User Engagement on the Web: 10 Basic Principles is concerned with making user experience engaging. The cascade of social web applications we are now familiar with - blogs, consumer reviews, wikis, and social networking - are all engaging experiences. But engagement is an increasingly common goal in business and productivity environments as well. This book provides a foundation for all those seeking to design engaging user experiences rich in communication and interaction. Combining a handbook on basic principles with case studies, it provides readers with a ric

  2. Pipe drafting and design

    CERN Document Server

    Parisher, Roy A

    2011-01-01

    Pipe Drafting and Design, Third Edition provides step-by-step instructions to walk pipe designers, drafters, and students through the creation of piping arrangement and isometric drawings. It includes instructions for the proper drawing of symbols for fittings, flanges, valves, and mechanical equipment. More than 350 illustrations and photographs provide examples and visual instructions. A unique feature is the systematic arrangement of drawings that begins with the layout of the structural foundations of a facility and continues through to the development of a 3-D model. Advanced chapters

  3. A heat exchanger provided with plates

    International Nuclear Information System (INIS)

    Chaix, J.E.; Fajeau, Maurice; Chlique, Bernard.

    1976-01-01

    The invention relates to a heat exchanger of the plate type, in which two fluids exchange calories through parallel metal plates, delimiting spaces separated from each other in which two fluids respectively flow without direct contact between them. The invention particularly applies in the case where one of the two fluids is water under pressure or else a circulating liquid metal, specially sodium, used in the system of a pressurised water or fast neutron reactor, the second fluid being water to be vaporised in the exchanger by the calories supplied by the first fluid. The arrangement is designed to give minimum bulk, particularly enabling the exchanger to be housed in the area between the core of a nuclear reactor and a casing or outer vessel, or else in an external sealed containment, with a view to recovering with the best efficiency the heat acquired by a coolant flowing through the core [fr

  4. Using games to provide interactive perioperative education.

    Science.gov (United States)

    Carifa, Linda; Janiszewski Goodin, Heather

    2011-10-01

    Perioperative nurses must use critical thinking and sound clinical judgment to meet their patients' needs safely and effectively. This requires the integration and continual updating of large amounts of detailed clinical information. Innovative education strategies are designed to make teaching and learning more interesting and interactive, especially for the presentation of complex subject material. One interactive educational strategy is the use of games. Educational games can foster collaboration and critical thinking among peers and associates. An example of this was the Perioperative QuizBowl: Evidence-Based Practice presented at the annual AORN Congress from 2003 to 2010, which was used to teach and reinforce evidence-based practice in a fun, competitive way. Although AORN no longer presents this offering, the QuizBowl format demonstrates how educational games can support clinical practice. Copyright © 2011 AORN, Inc. Published by Elsevier Inc. All rights reserved.

  5. Identifying Nonprovider Factors Affecting Pediatric Emergency Medicine Provider Efficiency.

    Science.gov (United States)

    Saleh, Fareed; Breslin, Kristen; Mullan, Paul C; Tillett, Zachary; Chamberlain, James M

    2017-10-31

    The aim of this study was to create a multivariable model of standardized relative value units per hour by adjusting for nonprovider factors that influence efficiency. We obtained productivity data based on billing records measured in emergency relative value units for (1) both evaluation and management of visits and (2) procedures for 16 pediatric emergency medicine providers with more than 750 hours worked per year. Eligible shifts were in an urban, academic pediatric emergency department (ED) with 2 sites: a tertiary care main campus and a satellite community site. We used multivariable linear regression to adjust for the impact of shift and pediatric ED characteristics on individual-provider efficiency and then removed variables from the model with minimal effect on productivity. There were 2998 eligible shifts for the 16 providers during a 3-year period. The resulting model included 4 variables when looking at both ED sites combined. These variables include the following: (1) number of procedures billed by provider, (2) season of the year, (3) shift start time, and (4) day of week. Results were improved when we separately modeled each ED location. A 3-variable model using procedures billed by provider, shift start time, and season explained 23% of the variation in provider efficiency at the academic ED site. A 3-variable model using procedures billed by provider, patient arrivals per hour, and shift start time explained 45% of the variation in provider efficiency at the satellite ED site. Several nonprovider factors affect provider efficiency. These factors should be considered when designing productivity-based incentives.

  6. Providing security assurance in line with national DBT assumptions

    Science.gov (United States)

    Bajramovic, Edita; Gupta, Deeksha

    2017-01-01

    As worldwide energy requirements are increasing simultaneously with climate change and energy security considerations, States are thinking about building nuclear power to fulfill their electricity requirements and decrease their dependence on carbon fuels. New nuclear power plants (NPPs) must have comprehensive cybersecurity measures integrated into their design, structure, and processes. In the absence of effective cybersecurity measures, the impact of nuclear security incidents can be severe. Some of the current nuclear facilities were not specifically designed and constructed to deal with the new threats, including targeted cyberattacks. Thus, newcomer countries must consider the Design Basis Threat (DBT) as one of the security fundamentals during design of physical and cyber protection systems of nuclear facilities. IAEA NSS 10 describes the DBT as "comprehensive description of the motivation, intentions and capabilities of potential adversaries against which protection systems are designed and evaluated". Nowadays, many threat actors, including hacktivists, insider threat, cyber criminals, state and non-state groups (terrorists) pose security risks to nuclear facilities. Threat assumptions are made on a national level. Consequently, threat assessment closely affects the design structures of nuclear facilities. Some of the recent security incidents e.g. Stuxnet worm (Advanced Persistent Threat) and theft of sensitive information in South Korea Nuclear Power Plant (Insider Threat) have shown that these attacks should be considered as the top threat to nuclear facilities. Therefore, the cybersecurity context is essential for secure and safe use of nuclear power. In addition, States should include multiple DBT scenarios in order to protect various target materials, types of facilities, and adversary objectives. Development of a comprehensive DBT is a precondition for the establishment and further improvement of domestic state nuclear-related regulations in the

  7. HVAC design manual for hospitals and clinics

    National Research Council Canada - National Science Library

    2013-01-01

    "Provides in-depth design recommendations and proven, cost effective, and reliable solutions for health care HVAC design that provide low maintenance cost and high reliability based on best practices...

  8. Tank design

    International Nuclear Information System (INIS)

    Earle, F.A.

    1992-01-01

    This paper reports that aboveground tanks can be designed with innovative changes to complement the environment. Tanks can be constructed to eliminate the vapor and odor emanating from their contents. Aboveground tanks are sometimes considered eyesores, and in some areas the landscaping has to be improved before they are tolerated. A more universal concern, however, is the vapor or odor that emanates from the tanks as a result of the materials being sorted. The assertive posture some segments of the public now take may eventually force legislatures to classify certain vapors as hazardous pollutants or simply health risks. In any case, responsibility will be leveled at the corporation and subsequent remedy could increase cost beyond preventive measures. The new approach to design and construction of aboveground tanks will forestall any panic which might be induced or perceived by environmentalists. Recently, actions by local authorities and complaining residents were sufficient to cause a corporation to curtail odorous emissions through a change in tank design. The tank design change eliminated the odor from fuel oil vapor thus removing the threat to the environment that the residents perceived. The design includes reinforcement to the tank structure and the addition of an adsorption section. This section allows the tanks to function without any limitation and their contents do not foul the environment. The vapor and odor control was completed successfully on 6,000,000 gallon capacity tanks

  9. Threatened corals provide underexplored microbial habitats.

    Directory of Open Access Journals (Sweden)

    Shinichi Sunagawa

    2010-03-01

    Full Text Available Contemporary in-depth sequencing of environmental samples has provided novel insights into microbial community structures, revealing that their diversity had been previously underestimated. Communities in marine environments are commonly composed of a few dominant taxa and a high number of taxonomically diverse, low-abundance organisms. However, studying the roles and genomic information of these "rare" organisms remains challenging, because little is known about their ecological niches and the environmental conditions to which they respond. Given the current threat to coral reef ecosystems, we investigated the potential of corals to provide highly specialized habitats for bacterial taxa including those that are rarely detected or absent in surrounding reef waters. The analysis of more than 350,000 small subunit ribosomal RNA (16S rRNA sequence tags and almost 2,000 nearly full-length 16S rRNA gene sequences revealed that rare seawater biosphere members are highly abundant or even dominant in diverse Caribbean corals. Closely related corals (in the same genus/family harbored similar bacterial communities. At higher taxonomic levels, however, the similarities of these communities did not correlate with the phylogenetic relationships among corals, opening novel questions about the evolutionary stability of coral-microbial associations. Large proportions of OTUs (28.7-49.1% were unique to the coral species of origin. Analysis of the most dominant ribotypes suggests that many uncovered bacterial taxa exist in coral habitats and await future exploration. Our results indicate that coral species, and by extension other animal hosts, act as specialized habitats of otherwise rare microbes in marine ecosystems. Here, deep sequencing provided insights into coral microbiota at an unparalleled resolution and revealed that corals harbor many bacterial taxa previously not known. Given that two of the coral species investigated are listed as threatened under

  10. Collective design in 3D printing: A large scale empirical study of designs, designers and evolution

    DEFF Research Database (Denmark)

    Özkil, Ali Gürcan

    2017-01-01

    This paper provides an empirical study of a collective design platform (Thingiverse); with the aim of understanding the phenomenon and investigating how designs concurrently evolve through the large and complex network of designers. The case study is based on the meta-data collected from 158 489 ...

  11. Does Industrial Ecology provide any new Perspectives?

    OpenAIRE

    Røine, Kjetil

    2000-01-01

    The research question in this report was, as the title alludes: Does industrial ecology provide any new perspectives? If yes, what are the new aspects? To answer these questions, a literature study has been conducted. The answer to the first question is yes. We claim that what is new about industrial ecology is the expansion of the system borders within which the actors operate. Bearing this in mind, it is proposed that the most important issue in industrial ecology is to unite the two m...

  12. Providing hedging protection for the transaction

    International Nuclear Information System (INIS)

    Richardson, D.W.

    1999-01-01

    This presentation dealt with methods for assessing commodity price risk in an asset transaction; the setting of risk management objectives; building hedging into the financing; and internal reporting and accounting to mitigate trading risks. It also provided some recent examples of successful hedging in gas asset transactions. The objectives of risk management and the nature of hedging and speculation were explored. An approach to price risk management was proposed. The development of price risk management tools, and techniques for managing risks involving interest rates, foreign exchange, and commodities were examined. figs

  13. Sensors Provide Early Warning of Biological Threats

    Science.gov (United States)

    2009-01-01

    Early Warning Inc. of Troy, New York, licensed powerful biosensor technology from Ames Research Center. Incorporating carbon nanotubes tipped with single strands of nucleic acid from waterborne pathogens, the sensor can detect even minute amounts of targeted, disease causing bacteria, viruses, and parasites. Early Warning features the NASA biosensor in its water analyzer, which can provide advance alert of potential biological hazards in water used for agriculture, food and beverages, showers, and at beaches and lakes -- within hours instead of the days required by conventional laboratory methods.

  14. Zika Virus: Critical Information for Emergency Providers.

    Science.gov (United States)

    Shastry, Siri; Koenig, Kristi L; Hirshon, Jon Mark

    2016-08-01

    Zika virus is an arbovirus of the Flaviviridae family. It is primarily a minimally symptomatic mosquito-borne infection. However, with Zika's 2015 to 2016 introduction into the Western Hemisphere and its dramatic and rapid spread, it has become a public health concern, in large part due to congenital abnormalities associated with infection in pregnant women. In early 2016, the World Health Organization declared the microcephaly and other neurologic conditions associated with Zika virus infection a public health emergency of international concern. This article discusses the current epidemiologic and clinical understanding of Zika virus, focusing on critical information needed by emergency providers. Copyright © 2016 Elsevier Inc. All rights reserved.

  15. Power beaming providing a space power infrastructure

    International Nuclear Information System (INIS)

    Bamberger, J.A.; Coomes, E.P.

    1992-01-01

    This paper, based on two levels of technology maturity, applied the power beaming concept to four panned satellite constellations. The analysis shows that with currently available technology, power beaming can provide mass savings to constellations in orbits ranging from low-Earth orbit to geosynchronous orbit. Two constellations, space surveillance and tracking system and space-based radar, can be supported with current technology. The other two constellations, space-based laser array and boost surveillance and tracking system, will require power and transmission system improvements before their breakeven specific mass is achieved. A doubling of SP-100 conversion efficiency from 10 to 20% would meet or exceed breakeven for these constellations

  16. Ancillary services provided by PV power plants

    Directory of Open Access Journals (Sweden)

    Antonio PIERNO

    2016-07-01

    Full Text Available Renewable energy sources are widely utilized in distributed generation systems, and, recently, they are also considered for providing ancillary services. The paper is focused on PV plants, a survey of the most interesting papers published in the literature in the last decade is reported and the main characteristics of the technical proposals, with their advantages and limits, are evidenced. The results are schematically shown in a table that immediately gives the opportunity to be aware of what was already done, representing a reference tool.

  17. Optimal experimental design with R

    CERN Document Server

    Rasch, Dieter; Verdooren, L R; Gebhardt, Albrecht

    2011-01-01

    Experimental design is often overlooked in the literature of applied and mathematical statistics: statistics is taught and understood as merely a collection of methods for analyzing data. Consequently, experimenters seldom think about optimal design, including prerequisites such as the necessary sample size needed for a precise answer for an experimental question. Providing a concise introduction to experimental design theory, Optimal Experimental Design with R: Introduces the philosophy of experimental design Provides an easy process for constructing experimental designs and calculating necessary sample size using R programs Teaches by example using a custom made R program package: OPDOE Consisting of detailed, data-rich examples, this book introduces experimenters to the philosophy of experimentation, experimental design, and data collection. It gives researchers and statisticians guidance in the construction of optimum experimental designs using R programs, including sample size calculations, hypothesis te...

  18. INFRASTRUCTURING DESIGN

    DEFF Research Database (Denmark)

    Ertner, Sara Marie

    The fact that the average citizen in Western societies is aging has significant implications for national welfare models. What some call ’the grey tsunami’ has resulted in suggestions for, and experiments in, re-designing healthcare systems and elderly care. In Denmark, one attempted solution...... that are imagined as the target group for welfare technology, and where are they located? Based on ethnographic explorations of ’welfare technology’ and related figures that include not only ’the elderly’, but also ’prototypes’ and ’partnership’ the dissertation analyses the processes and socio...... for collaborative design to happen. The implication of this is that technological design should not be imagined as the foundation for shaping more effective health care practices and better welfare. Instead, possibilities for improving practices through welfare technology emerge out of heterogeneous assemblages...

  19. Designing Mobilities

    DEFF Research Database (Denmark)

    Jensen, Ole B.

    are often still not engaged with in a sufficiently manner. Often social sciences keep distance to the physical and material as if the social was still to be understood as a realm separate of technology, architecture, and design (for a critique of this see; Latour 2005 and Urry 2000). This paper takes point......Within the so-called ‘mobilities turn’ (Adey 2010; Cresswell 2006; Urry 2007) much research has taken place during the last decade bringing mobilities into the centre of sociological analysis. However, the materiality and spatiality of artefacts, infrastructures, and sites hosting mobilities...... of departure in the sociological perspective termed ‘Staging Mobilities’ (Jensen 2013a) and utilizes this as an analytical frame for exploring cases of mobility design. The paper put focus on how the material shape, design and architectures of technologies, spaces and sites influence mobilities practices...

  20. Enhanced Design Alternative I: Low Temperature Design

    International Nuclear Information System (INIS)

    MacNeil, K.

    1999-01-01

    The purpose of this document is to evaluate Enhanced Design Alternative (EDA) 1, the low temperature repository design concept (CRWMS M and O 1999a). This technical document will provide supporting information for Site Recommendation (SR) and License Application (LA). Preparation of this evaluation will be in accordance with the technical document preparation plan (TDPP), (CRWMS M and O 1999b). EDA 1, one of five EDAs, was evolved from evaluation of a series of design features and alternatives developed during the first phase of the License Application Design Selection (LADS) process. Low, medium, and high temperature concepts were developed from the design features and alternatives prepared during Phase 1 of the LADS effort (CRWMS M and O 1999a). EDA 1 will first be evaluated against a single Screening Criterion, outlined in CRWMS M and O 1999a, which addresses post-closure performance of the repository. The performance of the repository is defined quantitatively as the peak radiological dose rate to an average individual of a critical group at a distance of 20 km from the repository site within 10,000 years. To satisfy this criterion the peak dose rate must not exceed the anticipated regulatory level of 25 mrem/yr within 10,000 years. If the EDA meets the screening criterion, the EDA will be further evaluated against the LADS Phase 2 Evaluation Criteria contained in CRWMS M and O 1999a

  1. Dark Design

    DEFF Research Database (Denmark)

    Jensen, Ole B.

    Any design idea or intervention in the world is based on an underpinning logic or a set of normative principles and values. At times such will be very explicit, at other times they will be unspoken and tacit. In this paper the underpinning values leading to power exercise, social exclusion, and d...... of technologies (e.g. Graham 2010). The paper re-works how inequalities are ‘staged’ through overt and covert design ideas and interventions shaping and re-shaping the social geography of a world increasingly marked by the rights, abilities, and opportunities to move freely – or not!...

  2. Design & Innovation

    DEFF Research Database (Denmark)

    Boelskifte, Per; Jørgensen, Ulrik

    2005-01-01

    The new design and innovation programme at DTU is challenging some of the standard concepts dominating most engineering educations. The programme, its background, context and basic educational ideas are presented and discussed in this paper. To build competences that match the need for innovative...... and design oriented engineers in industry and society has turned out to challenge a number of the standard – and often taken for granted – concepts in engineering education still dominated world wide by rather strict norms and concepts of learning that do not challenge the students creativity and innovative...

  3. Lighting Design

    DEFF Research Database (Denmark)

    Hansen, Ellen Kathrine; Mullins, Michael

    2014-01-01

    of design developed from three experiments show how distinct qualitative and quantitative criteria in different disciplinary traditions can be integrated successfully, despite disparate technical/scientific, social scientific and art/humanities backgrounds. The model is applied to a pedagogical curriculum......Light as a multi-dimensional design element has fundamental importance for a sustainable environment. The paper discusses the need for an integration of scientific, technical and creative approaches to light and presents theory, methods and applications toward fulfilling this need. A theory...

  4. VLSI design

    CERN Document Server

    Einspruch, Norman G

    1986-01-01

    VLSI Electronics Microstructure Science, Volume 14: VLSI Design presents a comprehensive exposition and assessment of the developments and trends in VLSI (Very Large Scale Integration) electronics. This volume covers topics that range from microscopic aspects of materials behavior and device performance to the comprehension of VLSI in systems applications. Each article is prepared by a recognized authority. The subjects discussed in this book include VLSI processor design methodology; the RISC (Reduced Instruction Set Computer); the VLSI testing program; silicon compilers for VLSI; and special

  5. Will British weather provide reliable electricity?

    International Nuclear Information System (INIS)

    Oswald, James; Raine, Mike; Ashraf-Ball, Hezlin

    2008-01-01

    There has been much academic debate on the ability of wind to provide a reliable electricity supply. The model presented here calculates the hourly power delivery of 25 GW of wind turbines distributed across Britain's grid, and assesses power delivery volatility and the implications for individual generators on the system. Met Office hourly wind speed data are used to determine power output and are calibrated using Ofgem's published wind output records. There are two main results. First, the model suggests that power swings of 70% within 12 h are to be expected in winter, and will require individual generators to go on or off line frequently, thereby reducing the utilisation and reliability of large centralised plants. These reductions will lead to increases in the cost of electricity and reductions in potential carbon savings. Secondly, it is shown that electricity demand in Britain can reach its annual peak with a simultaneous demise of wind power in Britain and neighbouring countries to very low levels. This significantly undermines the case for connecting the UK transmission grid to neighbouring grids. Recommendations are made for improving 'cost of wind' calculations. The authors are grateful for the sponsorship provided by The Renewable Energy Foundation

  6. Green roofs provide habitat for urban bats

    Directory of Open Access Journals (Sweden)

    K.L. Parkins

    2015-07-01

    Full Text Available Understanding bat use of human-altered habitat is critical for developing effective conservation plans for this ecologically important taxon. Green roofs, building rooftops covered in growing medium and vegetation, are increasingly important conservation tools that make use of underutilized space to provide breeding and foraging grounds for urban wildlife. Green roofs are especially important in highly urbanized areas such as New York City (NYC, which has more rooftops (34% than green space (13%. To date, no studies have examined the extent to which North American bats utilize urban green roofs. To investigate the role of green roofs in supporting urban bats, we monitored bat activity using ultrasonic recorders on four green and four conventional roofs located in highly developed areas of NYC, which were paired to control for location, height, and local variability in surrounding habitat and species diversity. We then identified bat vocalizations on these recordings to the species level. We documented the presence of five of nine possible bat species over both roof types: Lasiurus borealis, L. cinereus, L. noctivagans, P. subflavus,andE. fuscus. Of the bat calls that could be identified to the species level, 66% were from L. borealis. Overall levels of bat activity were higher over green roofs than over conventional roofs. This study provides evidence that, in addition to well documented ecosystem benefits, urban green roofs contribute to urban habitat availability for several North American bat species.

  7. Topical isoflavones provide effective photoprotection to skin.

    Science.gov (United States)

    Lin, Jing-Yi; Tournas, Joshua A; Burch, James A; Monteiro-Riviere, Nancy A; Zielinski, Jan

    2008-04-01

    Isoflavones, one main group of phytoestrogens, have antioxidative and photoprotective effects in cellular and mouse studies. The aim of this study is to obtain a more comprehensive understanding of the isoflavone-mediated photoprotection with the pig skin model, a more human-resembling model. The pig skin was treated with five well-known isoflavone compounds (genistein, equol, daidzein, biochanin A, and formononetin) and one antioxidant combination solution of 15% vitamin C and 1% vitamin E and 0.5% ferulic acid (CEF) daily for 4 days. Skin was irradiated with solar-simulated UV irradiation, 1 to 5 minimal erythema dose (MED) at 1-MED intervals. Evaluation was carried out 24 h later by colorimeter-measured erythema and sunburn cell numbers. Topical application of 0.5% solutions of three individual phytoestrogens - genistein, daidzein, biochanin A - are better than similar solutions of equol or formononetin in protecting pig skin from solar-simulated ultraviolet (SSUV)-induced photodamage, as measured by sunburn cell formation and/or erythema. However, the protection was less than that provided by a topical combination antioxidant standard containing 15% L-ascorbic acid, 1%alpha-tocopherol, and 0.5% ferulic acid. Isoflavones provide effective photoprotection and are good candidate ingredients for protection against ultraviolet (UV) photodamage.

  8. Cost Calculation Model for Logistics Service Providers

    Directory of Open Access Journals (Sweden)

    Zoltán Bokor

    2012-11-01

    Full Text Available The exact calculation of logistics costs has become a real challenge in logistics and supply chain management. It is essential to gain reliable and accurate costing information to attain efficient resource allocation within the logistics service provider companies. Traditional costing approaches, however, may not be sufficient to reach this aim in case of complex and heterogeneous logistics service structures. So this paper intends to explore the ways of improving the cost calculation regimes of logistics service providers and show how to adopt the multi-level full cost allocation technique in logistics practice. After determining the methodological framework, a sample cost calculation scheme is developed and tested by using estimated input data. Based on the theoretical findings and the experiences of the pilot project it can be concluded that the improved costing model contributes to making logistics costing more accurate and transparent. Moreover, the relations between costs and performances also become more visible, which enhances the effectiveness of logistics planning and controlling significantly

  9. Dosimeter design specifications

    International Nuclear Information System (INIS)

    Anon.

    1981-01-01

    The combination dosimeter and security credential holder was developed as part of the effort involved to provide an automated readout and thermoluminescent dosimetry capability at Hanford. The holder is designed to accomodate the thermoluminescent dosimeter card, appropriate filters, the security credential and a snap type clip. The body of the holder is ABS plastic (acrylontrile-butadiene-styrene). The dosimeter holder and card is mold casted providing uniformity of construction

  10. Do Cochrane reviews provide a good model for social science?

    DEFF Research Database (Denmark)

    Konnerup, Merete; Kongsted, Hans Christian

    2012-01-01

    Formalised research synthesis to underpin evidence-based policy and practice has become increasingly important in areas of public policy. In this paper we discuss whether the Cochrane standard for systematic reviews of healthcare interventions is appropriate for social research. We examine...... the formal criteria of the Cochrane Collaboration for including particular study designs and search the Cochrane Library to provide quantitative evidence on the de facto standard of actual Cochrane reviews. By identifying the sample of Cochrane reviews that consider observational designs, we are able...... to conclude that the majority of reviews appears limited to considering randomised controlled trials only. Because recent studies have delineated conditions for observational studies in social research to produce valid evidence, we argue that an inclusive approach is essential for truly evidence-based policy...

  11. Providing floating capabilities in latest-generation sand screens

    Energy Technology Data Exchange (ETDEWEB)

    Bowen, E.G.; Coronado, M.P. [Society of Petroleum Engineers, Richardson, TX (United States)]|[Baker Hughes, Houston, TX (United States)

    2008-10-15

    Alternative production methods are needed for the massive reserves located in the bitumen region of Canada's tar sands. The area has over 100 installations of sand screens/slotted liners in both injection and production legs using steam-assisted gravity drainage (SAGD) technology. Multiple wells must be drilled from a single pad because of the sensitive nature of the environment. With significant depths of these wells, a floating sand screen provides assurance that the sand screen will reach the desired depth. Paraffin is generally used to plug the flow access of the screen during installation. This paper discussed a new technology that has been developed to allow for sand screen installations without relying on paraffin wax to withstand differential pressure. The new technology uses a hydro-mechanical valving system incorporated into the screen design to temporarily close off the screen while being run in the hole. The paper described how the technology could provide a reliable, time-saving solution for SAGD installations when floating sand control screens are needed. The paper discussed current technology and its limitations, sand screen installation, screen design for floating applications, and additional applications. It was concluded that this technology solution provides a unique alternative to the methods currently used to install sand screens with SAGD technology in the fast growing Canadian market for bitumen recovery. 2 refs., 5 figs.

  12. Understanding Midwives’ Preferences for Providing Information About Newborn Bloodspot Screening

    Directory of Open Access Journals (Sweden)

    Stuart James Wright

    2018-01-01

    Full Text Available Background: Understanding preferences for information provision in the context of health care service provision is challenging because of the number of potential attributes that may influence preferences. This study aimed to identify midwives’ preferences for the process and outcomes of information provision in an expanded national newborn bloodspot screening program. Design: A sample of practicing midwives completed a hybrid-stated preference survey including a conjoint analysis (CA and discrete choice experiment to quantify preferences for the types of, and way in which, information should be provided in a newborn bloodspot screening program. Six conjoint analysis questions captured the impact of different types of information on parents’ ability to make a decision, and 10 discrete choice experiment questions identified preferences for four process attributes (including parents’ ability to make a decision. Results: Midwives employed by the UK National Health Service (n = 134 completed the survey. All types of information content were perceived to improve parents’ ability to make a decision except for the possibility of false-positive results. Late pregnancy was seen to be the best time to provide information, followed by day 3 postbirth. Information before 20 weeks of pregnancy was viewed as reducing parents’ ability to make a decision. Midwives preferred information to be provided by an individual discussion and did not think parents should receive information on the Internet. Conclusion: A hybrid stated preference survey design identified that a wide variety of information should be provided to maximize parents’ ability to make a decision ideally provided late in pregnancy or on day 3 postbirth.

  13. Engineering test facility design center

    International Nuclear Information System (INIS)

    Anon.

    1980-01-01

    The vehicle by which the fusion program would move into the engineering testing phase of fusion power development is designated the Engineering Test Facility (ETF). The ETF would provide a test bed for reactor components in the fusion environment. In order to initiate preliminary planning for the ETF decision, the Office of Fusion Energy established the ETF Design Center activity to prepare the design of the ETF. This section describes the status of this design

  14. Designing the design at JPL'S innovation foundary

    Science.gov (United States)

    Balint, Tibor S.; Freeman, Anthony

    2017-08-01

    -engineering disciplines, such as industrial and graphic design, human centered design, and even art. Communicating the information more effectively through conversations and symbolic means benefits from the skills of human centered designers and artists. In this paper we will discuss how design is being designed at JPL's Innovation Foundry, by focusing on novel languages, storytelling, conversations, boundary objects in support of improved communications both externally to stakeholders and sponsors, and internally within the design teams. We will also highlight how these new design driven approaches provide a strategic strength for the organization when competing for funding in a resource-constrained environment.

  15. ESD analog circuits and design

    CERN Document Server

    Voldman, Steven H

    2014-01-01

    A comprehensive and in-depth review of analog circuit layout, schematic architecture, device, power network and ESD design This book will provide a balanced overview of analog circuit design layout, analog circuit schematic development, architecture of chips, and ESD design.  It will start at an introductory level and will bring the reader right up to the state-of-the-art. Two critical design aspects for analog and power integrated circuits are combined. The first design aspect covers analog circuit design techniques to achieve the desired circuit performance. The second and main aspect pres

  16. Behavioral and Psychosocial Characteristics Among Head Start Childcare Providers.

    Science.gov (United States)

    Ling, Jiying

    2017-01-01

    The aim of the study was twofold: (a) describe behavioral and psychosocial characteristics of Head Start childcare providers including technology use, physical activity, nutrition, depression, and quality of life and (b) examine associations among these characteristics. Using a cross-sectional design, a nonrandom sample of 80 Head Start childcare providers completed an online survey via SurveyMonkey. About 80.1% were overweight or obese. Nearly all had a computer or smartphone. About 55% met the national physical activity recommendation of 150 min/week. Approximately 56.2% did not know the recommended daily servings of fruits and vegetables, and 26.3% had ≥3 servings of vegetables per day. About 38.8% had major depression or dysthymia, and 31.3% had depressive symptoms. The top two perceived health needs were weight loss and stress management. Providing a health promotion and stress management program to childcare providers may benefit both providers and children, considering the strong influence of teachers on children.

  17. Designing Mobilities

    DEFF Research Database (Denmark)

    Jensen, Ole B.

    How is the width of the pavement shaping the urban experience? How is the material design of transport infrastructure and mobile technology affording social interaction in everyday life spaces? How do people inhabit these spaces with their bodies and in accordance to social and cultural norms...

  18. Designed communities?

    DEFF Research Database (Denmark)

    Stender, Marie

    2013-01-01

    In current residential spaces there seem to be an increasing emphasis on small-scale communities. A number of new, high profiled residential complexes thus seek to promote new ways of social living by rethinking architectural design, typologies and concepts. In this paper I explore the emergence ...

  19. Design junctions

    DEFF Research Database (Denmark)

    Jørgensen, Ulrik

    2012-01-01

    . This case study illustrates how dominant regimes of practice, established through the conception of pathogen bacteria and antibacterial treatments and disinfection, are now creating signals that call into question fundamental design of hygiene practices. By examining the epistemic assumptions of scientific...

  20. Participatory Design

    DEFF Research Database (Denmark)

    Robertson, Toni; Simonsen, Jesper

    2012-01-01

    focus of later chapters. The target audience is identified, and the structure of the book explained. A short description of each chapter highlights its particular contributions as well as the associated challenges facing designers and researchers engaged in participatory approaches. The chapter...

  1. Designer's Identity

    DEFF Research Database (Denmark)

    Kunrath, Kamila; Cash, Philip; Li-Ying, Jason

    2016-01-01

    A designer’s professional identity (DPI) develops through both education and professional experience, building on core personality traits and innate skills. In this paper a systematic literature review and a secondary narrative review were developed in order to map personal attributes and design...

  2. Appraising design

    Science.gov (United States)

    2016-05-26

    Acronyms ADM Army Design Methodology AFRICOM Africa Command CAS Complex Adaptive System COCOM...the case studies. It does not analyze the moral forces of training, quality of troops, and readiness. It also does not analyze national strength in...Second Lebanese War.110 Issues included a lack of vests, medical equipment, radios, ammunition, night vision devices (NVD), and food and water for the

  3. Dwelling Designers

    Science.gov (United States)

    Szekely, George

    2012-01-01

    Children's inventions go far beyond track housing or Ethan Allen furniture; they foreshadow the most innovative ideas in building forms and interior designs. Children improvise with containers and find places in a home that suggest enticing dwellings. A drawer left open becomes a balcony, soap trays become cots, and the space between twin beds…

  4. Probabilistic Design

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Burcharth, H. F.

    This chapter describes how partial safety factors can be used in design of vertical wall breakwaters and an example of a code format is presented. The partial safety factors are calibrated on a probabilistic basis. The code calibration process used to calibrate some of the partial safety factors...

  5. Intimate Design

    DEFF Research Database (Denmark)

    Søndergaard, Marie Louise Juul

    2017-01-01

    I examine how design can reflect on and critically discuss political and cultural issues of intimate technologies, such as gender and identity, embodied experiences, privacy, intimate data and sharing. In presenting my PhD project's background, research objectives, hypothesis and methodological...

  6. Collaborative Design

    Science.gov (United States)

    Broderick, Debora

    2014-01-01

    This practitioner research study investigates the power of multimodal texts within a real-world context and argues that a participatory culture focused on literary arts offers marginalized high school students opportunities for collaborative design and authoring. Additionally, this article invites educators to rethink the at-risk label. This…

  7. Integreret Design

    DEFF Research Database (Denmark)

    Helweg-Larsen, Klavs; Lenau, Torben Anker; Kristensen, Tore

    Integreret Design (ItD) var et tværdisciplinært kursus, der gennemførtes i samarbejde mellem Danmarks Designskole, Danmarks Tekniske Universitet og Handelshøjskolen i København i årene 1998 - 2001. Som støtte for undervisningen blev der udviklet et kompendium i bogform, som udgives af Danmarks...

  8. Didaktisk Design

    DEFF Research Database (Denmark)

    Sørensen, Birgitte Holm; Levinsen, Karin

    projekter - Individuelle fordybelsesprojekter. Forfatterne introducerer begrebet elever som didaktiske designere og viser med konkrete eksempler fra dansk, matematik og tværfaglige forløb, hvordan læreren med et overordnet rammedesign kan understøtte elevernes design af deres egne læreprocesser og dermed...

  9. Safety design

    International Nuclear Information System (INIS)

    Kunitomi, Kazuhiko; Shiozawa, Shusaku

    2004-01-01

    JAERI established the safety design philosophy of the HTTR based on that of current reactors such as LWR in Japan, considering inherent safety features of the HTTR. The strategy of defense in depth was implemented so that the safety engineering functions such as control of reactivity, removal of residual heat and confinement of fission products shall be well performed to ensure safety. However, unlike the LWR, the inherent design features of the high-temperature gas-cooled reactor (HTGR) enables the HTTR meet stringent regulatory criteria without much dependence on active safety systems. On the other hand, the safety in an accident typical to the HTGR such as the depressurization accident initiated by a primary pipe rupture shall be ensured. The safety design philosophy of the HTTR considers these unique features appropriately and is expected to be the basis for future Japanese HTGRs. This paper describes the safety design philosophy and safety evaluation procedure of the HTTR especially focusing on unique considerations to the HTTR. Also, experiences obtained from an HTTR safety review and R and D needs for establishing the safety philosophy for the future HTGRs are reported

  10. Optical fiber head for providing lateral viewing

    Science.gov (United States)

    Everett, Matthew J.; Colston, Billy W.; James, Dale L.; Brown, Steve; Da Silva, Luiz

    2002-01-01

    The head of an optical fiber comprising the sensing probe of an optical heterodyne sensing device includes a planar surface that intersects the perpendicular to axial centerline of the fiber at a polishing angle .theta.. The planar surface is coated with a reflective material so that light traveling axially through the fiber is reflected transverse to the fiber's axial centerline, and is emitted laterally through the side of the fiber. Alternatively, the planar surface can be left uncoated. The polishing angle .theta. must be no greater than 39.degree. or must be at least 51.degree.. The emitted light is reflected from adjacent biological tissue, collected by the head, and then processed to provide real-time images of the tissue. The method for forming the planar surface includes shearing the end of the optical fiber and applying the reflective material before removing the buffer that circumscribes the cladding and the core.

  11. Development of Model for Providing Feasible Scholarship

    Directory of Open Access Journals (Sweden)

    Harry Dhika

    2016-05-01

    Full Text Available The current work focuses on the development of a model to determine a feasible scholarship recipient on the basis of the naiv¨e Bayes’ method using very simple and limited attributes. Those attributes are the applicants academic year, represented by their semester, academic performance, represented by their GPa, socioeconomic ability, which represented the economic capability to attend a higher education institution, and their level of social involvement. To establish and evaluate the model performance, empirical data are collected, and the data of 100 students are divided into 80 student data for the model training and the remaining of 20 student data are for the model testing. The results suggest that the model is capable to provide recommendations for the potential scholarship recipient at the level of accuracy of 95%.

  12. Data governance for health care providers.

    Science.gov (United States)

    Andronis, Katerina; Moysey, Kevin

    2013-01-01

    Data governance is characterised from broader definitions of governance. These characteristics are then mapped to a framework that provides a practical representation of the concepts. This representation is further developed with operating models and roles. Several information related scenarios covering both clinical and non-clinical domains are considered in information terms and then related back to the data governance framework. This assists the reader in understanding how data governance would help address the issues or achieve a better outcome. These elements together enable the reader to gain an understanding of the data governance framework and how it applies in practice. Finally, some practical advice is offered for establishing and operating data governance as well as approaches for justifying the investment.

  13. Providing Universal Health Insurance Coverage in Nigeria.

    Science.gov (United States)

    Okebukola, Peter O; Brieger, William R

    2016-07-07

    Despite a stated goal of achieving universal coverage, the National Health Insurance Scheme of Nigeria had achieved only 4% coverage 12 years after it was launched. This study assessed the plans of the National Health Insurance Scheme to achieve universal health insurance coverage in Nigeria by 2015 and discusses the challenges facing the scheme in achieving insurance coverage. In-depth interviews from various levels of the health-care system in the country, including providers, were conducted. The results of the analysis suggest that challenges to extending coverage include the difficulty in convincing autonomous state governments to buy into the scheme and an inadequate health workforce that might not be able to meet increased demand. Recommendations for increasing the scheme's coverage include increasing decentralization and strengthening human resources for health in the service delivery systems. Strong political will is needed as a catalyst to achieving these goals. © The Author(s) 2016.

  14. Providing Virtual Execution Environments: A Twofold Illustration

    CERN Document Server

    Grehant, Xavier

    2008-01-01

    Platform virtualization helps solving major grid computing challenges: share resource with flexible, user-controlled and custom execution environments and in the meanwhile, isolate failures and malicious code. Grid resource management tools will evolve to embrace support for virtual resource. We present two open source projects that transparently supply virtual execution environments. Tycoon has been developed at HP Labs to optimise resource usage in creating an economy where users bid to access virtual machines and compete for CPU cycles. SmartDomains provides a peer-to-peer layer that automates virtual machines deployment using a description language and deployment engine from HP Labs. These projects demonstrate both client-server and peer-to-peer approaches to virtual resource management. The first case makes extensive use of virtual machines features for dynamic resource allocation. The second translates virtual machines capabilities into a sophisticated language where resource management components can b...

  15. Multicultural Nursing: Providing Better Employee Care.

    Science.gov (United States)

    Rittle, Chad

    2015-12-01

    Living in an increasingly multicultural society, nurses are regularly required to care for employees from a variety of cultural backgrounds. An awareness of cultural differences focuses occupational health nurses on those differences and results in better employee care. This article explores the concept of culturally competent employee care, some of the non-verbal communication cues among cultural groups, models associated with completing a cultural assessment, and how health disparities in the workplace can affect delivery of employee care. Self-evaluation of the occupational health nurse for personal preferences and biases is also discussed. Development of cultural competency is a process, and occupational health nurses must develop these skills. By developing cultural competence, occupational health nurses can conduct complete cultural assessments, facilitate better communication with employees from a variety of cultural backgrounds, and improve employee health and compliance with care regimens. Tips and guidelines for facilitating communication between occupational health nurses and employees are also provided. © 2015 The Author(s).

  16. Supercomputing Centers and Electricity Service Providers

    DEFF Research Database (Denmark)

    Patki, Tapasya; Bates, Natalie; Ghatikar, Girish

    2016-01-01

    from a detailed, quantitative survey-based analysis and compare the perspectives of the European grid and SCs to the ones of the United States (US). We then show that contrary to the expectation, SCs in the US are more open toward cooperating and developing demand-management strategies with their ESPs......Supercomputing Centers (SCs) have high and variable power demands, which increase the challenges of the Electricity Service Providers (ESPs) with regards to efficient electricity distribution and reliable grid operation. High penetration of renewable energy generation further exacerbates...... this problem. In order to develop a symbiotic relationship between the SCs and their ESPs and to support effective power management at all levels, it is critical to understand and analyze how the existing relationships were formed and how these are expected to evolve. In this paper, we first present results...

  17. New consumer services provided by smart metering

    Directory of Open Access Journals (Sweden)

    Daminov Ildar

    2015-01-01

    Full Text Available This paper focuses on the issues of smart metering market and considers different services provided by smart metering from consumer point of view. Firstly, smart metering deployment challenges emerging and conventional tariffs, which modify a consumer behavior and thus, the entire electric energy market can be optimized since the customer is motivated to consume less energy. Secondly, the authors illustrate changes in electricity quality, which have an impact on consumer relations with utility. Additionally, two main indices of grid resilience – SAIDI and SAIFI – are exemplified to reveal the improvement potential of smart metering implementation in certain regions of Russia that also influence the consumer. Finally, in-home display and privacy problem directly reflect the consumer’s behavior, thus the private life rights should not be violated as they are guaranteed by law.

  18. Fallout radiation protection provided by transportation vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Burson, Z.G.

    1972-10-20

    Fallout radiation protection factors (PF's) were estimated for a variety of civilian transportation vehicles using measurements of the natural terrain radiation as a source. The PF values are below 2 in light vehicles, truck beds, or trailers; from 2.5 to 3 in the cabs of heavy trucks and in a railway guard car; and from 3.0 to 3.5 in the engineer's seat of heavy locomotives. This information can be useful in planning the possible movement of personnel from or through areas contaminated either by a wartime incident or a peacetime accident. The information may also be useful for studying the reduction of exposure to the natural terrestrial radiation environment provided by vehicles.

  19. Providing better indoor environmental quality brings economicbenefits

    Energy Technology Data Exchange (ETDEWEB)

    Fisk, William; Seppanen, Olli

    2007-06-01

    This paper summarizes the current scientific evidence that improved indoor environmental quality can improve work performance and health. The review indicates that work and school work performance is affected by indoor temperature and ventilation rate. Pollutant source removal can sometimes improve work performance. Based on formal statistical analyses of existing research results, quantitative relationships are provided for the linkages of work performance with indoor temperature and outdoor air ventilation rate. The review also indicates that improved health and related financial savings are obtainable from reduced indoor tobacco smoking, prevention and remediation of building dampness, and increased ventilation. Example cost-benefit analyses indicate that many measures to improve indoor temperature control and increase ventilation rates will be highly cost effective, with benefit-cost ratios as high as 80 and annual economic benefits as high as $700 per person.

  20. Multiagency Initiative to Provide Greenhouse Gas Information

    Science.gov (United States)

    Boland, Stacey W.; Duren, Riley M.

    2009-11-01

    Global Greenhouse Gas Information System Workshop; Albuquerque, New Mexico, 20-22 May 2009; The second Greenhouse Gas Information System (GHGIS) workshop brought together 74 representatives from 28 organizations including U.S. government agencies, national laboratories, and members of the academic community to address issues related to the understanding, operational monitoring, and tracking of greenhouse gas emissions and carbon offsets. The workshop was held at Sandia National Laboratories and organized by an interagency collaboration among NASA centers, Department of Energy laboratories, and the U.S. National Oceanic and Atmospheric Administration. It was motivated by the perceived need for an integrated interagency, community-wide initiative to provide information about greenhouse gas sources and sinks at policy-relevant temporal and spatial scales. Such an initiative could significantly enhance the ability of national and regional governments, industry, and private citizens to implement and evaluate effective climate change mitigation policies.

  1. INTEGRATED INFORMATION SYSTEM ARCHITECTURE PROVIDING BEHAVIORAL FEATURE

    Directory of Open Access Journals (Sweden)

    Vladimir N. Shvedenko

    2016-11-01

    Full Text Available The paper deals with creation of integrated information system architecture capable of supporting management decisions using behavioral features. The paper considers the architecture of information decision support system for production system management. The behavioral feature is given to an information system, and it ensures extraction, processing of information, management decision-making with both automated and automatic modes of decision-making subsystem being permitted. Practical implementation of information system with behavior is based on service-oriented architecture: there is a set of independent services in the information system that provides data of its subsystems or data processing by separate application under the chosen variant of the problematic situation settlement. For creation of integrated information system with behavior we propose architecture including the following subsystems: data bus, subsystem for interaction with the integrated applications based on metadata, business process management subsystem, subsystem for the current state analysis of the enterprise and management decision-making, behavior training subsystem. For each problematic situation a separate logical layer service is created in Unified Service Bus handling problematic situations. This architecture reduces system information complexity due to the fact that with a constant amount of system elements the number of links decreases, since each layer provides communication center of responsibility for the resource with the services of corresponding applications. If a similar problematic situation occurs, its resolution is automatically removed from problem situation metamodel repository and business process metamodel of its settlement. In the business process performance commands are generated to the corresponding centers of responsibility to settle a problematic situation.

  2. Loads Providing Ancillary Services: Review of International Experience

    Energy Technology Data Exchange (ETDEWEB)

    Heffner, Grayson; Goldman, Charles; Kintner-Meyer, Michael

    2007-05-01

    In this study, we examine the arrangements for and experiences of end-use loads providing ancillary services (AS) in five electricity markets: Australia, the United Kingdom (UK), the Nordic market, and the ERCOT and PJM markets in the United States. Our objective in undertaking this review of international experience was to identify specific approaches or market designs that have enabled customer loads to effectively deliver various ancillary services (AS) products. We hope that this report will contribute to the ongoing discussion in the U.S. and elsewhere regarding what institutional and technical developments are needed to ensure that customer loads can meaningfully participate in all wholesale electricity markets.

  3. Primary care providers' lived experiences of genetics in practice.

    Science.gov (United States)

    Harding, Brittany; Webber, Colleen; Ruhland, Lucia; Dalgarno, Nancy; Armour, Christine M; Birtwhistle, Richard; Brown, Glenn; Carroll, June C; Flavin, Michael; Phillips, Susan; MacKenzie, Jennifer J

    2018-04-26

    To effectively translate genetic advances into practice, engagement of primary care providers (PCPs) is essential. Using a qualitative, phenomenological methodology, we analyzed key informant interviews and focus groups designed to explore perspectives of urban and rural PCPs. PCPs endorsed a responsibility to integrate genetics into their practices and expected advances in genetic medicine to expand. However, PCPs reported limited knowledge and difficulties accessing resources, experts, and continuing education. Rural practitioners' additional concerns included cost, distance, and poor patient engagement. PCPs' perspectives are crucial to develop relevant educational and systems-based interventions to further expand genetic medicine in primary care.

  4. Mechanical Drawing and Design.

    Science.gov (United States)

    Mikulsky, Marilyn; McEnaney, Walter K.

    A syllabus is provided for a comprehensive foundation course in mechanical drawing and design for grades 9, 10, 11, or 12 that is prerequisite to advanced elective courses. Introductory materials include course objectives, an overview of basic concepts, and guidelines for implementation. Brief discussions of and suggestions for the areas of design…

  5. PRA and Conceptual Design

    Science.gov (United States)

    DeMott, Diana; Fuqua, Bryan; Wilson, Paul

    2013-01-01

    Once a project obtains approval, decision makers have to consider a variety of alternative paths for completing the project and meeting the project objectives. How decisions are made involves a variety of elements including: cost, experience, current technology, ideologies, politics, future needs and desires, capabilities, manpower, timing, available information, and for many ventures management needs to assess the elements of risk versus reward. The use of high level Probabilistic Risk Assessment (PRA) Models during conceptual design phases provides management with additional information during the decision making process regarding the risk potential for proposed operations and design prototypes. The methodology can be used as a tool to: 1) allow trade studies to compare alternatives based on risk, 2) determine which elements (equipment, process or operational parameters) drives the risk, and 3) provide information to mitigate or eliminate risks early in the conceptual design to lower costs. Creating system models using conceptual design proposals and generic key systems based on what is known today can provide an understanding of the magnitudes of proposed systems and operational risks and facilitates trade study comparisons early in the decision making process. Identifying the "best" way to achieve the desired results is difficult, and generally occurs based on limited information. PRA provides a tool for decision makers to explore how some decisions will affect risk before the project is committed to that path, which can ultimately save time and money.

  6. CAD: Designs on Business.

    Science.gov (United States)

    Milburn, Ken

    1988-01-01

    Provides a general review of the field of Computer-Aided Design Software including specific reviews of "Autosketch,""Generic CADD,""Drafix 1 Plus,""FastCAD," and "Autocad Release 9." Brief articles include "Blueprint for Generation,""CAD for Every Department,""Ideas…

  7. Exploring Fashion Design.

    Science.gov (United States)

    Arata, Barbara

    The purpose of the curriculum guide is to introduce the exploratory student to the fundamental skills and knowledge necessary for employment in the garment industry, from factory to design room. It was developed for a six or seven-week exploratory program for ninth or tenth grade students. The manual provides an introduction to the different areas…

  8. Design variables and constraints in fashion store design processes

    DEFF Research Database (Denmark)

    Haug, Anders; Borch Münster, Mia

    2015-01-01

    is to identify the most important store design variables, organise these variables into categories, understand the design constraints between categories, and determine the most influential stakeholders. Design/methodology/approach: – Based on a discussion of existing literature, the paper defines a framework...... into categories, provides an understanding of constraints between categories of variables, and identifies the most influential stakeholders. The paper demonstrates that the fashion store design task can be understood through a system perspective, implying that the store design task becomes a matter of defining......Purpose: – Several frameworks of retail store environment variables exist, but as shown by this paper, they are not particularly well-suited for supporting fashion store design processes. Thus, in order to provide an improved understanding of fashion store design, the purpose of this paper...

  9. Design i Danmark = Danish Design?

    DEFF Research Database (Denmark)

    Lentz, Uffe

    2003-01-01

    Titlen på denne forelæsning har 3 led skønt det ser ud som om der er 4. Design i Danmark er en geografisk afgrænsning af et ikke særligt veldefineret begreb, der både kan dække over ting og aktiviteter, mens Danish Design er en fælles hat man har markedsført en række produkter under, for at få...... værdiopfattelse før fra det ene produkt til det andet. Et Brand ville det hedde i dag....

  10. Reimbursement issues facing patients, providers, and payers.

    Science.gov (United States)

    Antman, K

    1993-11-01

    and decisions by the insurance industry have a direct impact on physicians, facilitating, or often impeding, the care physicians are able to provide. Who makes health policy decisions? Increasingly, these decisions are being made not by physicians, but by public health experts, economists, and, more recently, large industries grappling with the cost of providing insurance coverage (and its effects on competitive pricing in a world market). Therefore, physicians need to position themselves to influence the development of medical policy, particularly as it relates to the prevention, diagnosis, and treatment of patients with cancer.

  11. CORNELL: Bunch trains provide higher luminosity

    International Nuclear Information System (INIS)

    Anon.

    1995-01-01

    The new colliding beam technique - ''bunch trains'' - at Cornell's electron-positron Storage Ring (CESR) has led to a new world record for colliding beam luminosity - 3.3 x 10 32 cm -2 s -1 . In the bid to increase reaction rate for any particular process, this luminosity is pushed as high as possible. Once all other luminosityincreasing cards have been played, the only practical way of making a large gain in luminosity is to increase the frequency of bunch-bunch collisions by increasing the number of bunches stored in the ring. However this is not without its own problems: • If the two beams travel the same orbit, the n bunches in one beam collide with the n bunches of the other at 2n points around the ring, and the resulting cumulative nonlinear beam-beam effect (tune shift) severely limits the luminosity attainable at any interaction point. • The destabilizing wakefield effects of bunches on each other increase as the number of bunches increases and the spacing between them decreases. • The synchrotron radiation emitted by the beams becomes a severe problem as the total beam current is raised: to overcome these effects means supplying radiofrequency power to maintain the beam energy, carrying away heat from the vacuum chamber walls, pumping out desorbed gases, and controlling Xray backgrounds in the experiment. In 1979, CESR was designed to run with a single bunch of electrons and a single bunch of positrons circulating on the same orbit and colliding head-on at two diametrically opposite points in the ring, where the CLEO and CUSB experiments were then located. Ideally one could store multiple bunches and solve the multiple collision point problem by using separate rings for the two beams, as in the CERN ISR proton-proton collider and in the original DORIS two-ring configuration at DESY, Hamburg, making the two beams intersect only at the experiments. A less expensive version of this two-ring scheme was accomplished at CESR in

  12. CORNELL: Bunch trains provide higher luminosity

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1995-09-15

    The new colliding beam technique - ''bunch trains'' - at Cornell's electron-positron Storage Ring (CESR) has led to a new world record for colliding beam luminosity - 3.3 x 10{sup 32} cm{sup -2}s{sup -1}. In the bid to increase reaction rate for any particular process, this luminosity is pushed as high as possible. Once all other luminosityincreasing cards have been played, the only practical way of making a large gain in luminosity is to increase the frequency of bunch-bunch collisions by increasing the number of bunches stored in the ring. However this is not without its own problems: • If the two beams travel the same orbit, the n bunches in one beam collide with the n bunches of the other at 2n points around the ring, and the resulting cumulative nonlinear beam-beam effect (tune shift) severely limits the luminosity attainable at any interaction point. • The destabilizing wakefield effects of bunches on each other increase as the number of bunches increases and the spacing between them decreases. • The synchrotron radiation emitted by the beams becomes a severe problem as the total beam current is raised: to overcome these effects means supplying radiofrequency power to maintain the beam energy, carrying away heat from the vacuum chamber walls, pumping out desorbed gases, and controlling Xray backgrounds in the experiment. In 1979, CESR was designed to run with a single bunch of electrons and a single bunch of positrons circulating on the same orbit and colliding head-on at two diametrically opposite points in the ring, where the CLEO and CUSB experiments were then located. Ideally one could store multiple bunches and solve the multiple collision point problem by using separate rings for the two beams, as in the CERN ISR proton-proton collider and in the original DORIS two-ring configuration at DESY, Hamburg, making the two beams intersect only at the experiments. A less expensive version of this two-ring scheme was accomplished at CESR in 1983, using

  13. Maintenance - a design perspective

    International Nuclear Information System (INIS)

    Hedges, K.R.

    1992-01-01

    The paper describes how the CANDU-3 has incorporated, at the design stage, maintenance requirements such as component accessibility, standardization, ease of replacement, reduction in the number of components, and simplified component design. AECL is also active in the planned rehabilitation of the four units at Ontario Hydro's Bruce A nuclear generating station. In addition to conceptual design and development, detailed design and analysis, procurement and site assistance, AECL's Sheridan Park Laboratory will provide important development and mockup facilities. An AECL research and development program on reactor maintenance includes the identification and characterization of aging and degrading mechanisms, the tailoring of developed products to plant requirements, and the identification of areas of international cooperation and information exchange. 3 tabs., 1 fig

  14. Aircraft Design Software

    Science.gov (United States)

    1997-01-01

    Successful commercialization of the AirCraft SYNThesis (ACSYNT) tool has resulted in the creation of Phoenix Integration, Inc. ACSYNT has been exclusively licensed to the company, an outcome of a seven year, $3 million effort to provide unique software technology to a focused design engineering market. Ames Research Center formulated ACSYNT and in working with the Virginia Polytechnic Institute CAD Laboratory, began to design and code a computer-aided design for ACSYNT. Using a Joint Sponsored Research Agreement, Ames formed an industry-government-university alliance to improve and foster research and development for the software. As a result of the ACSYNT Institute, the software is becoming a predominant tool for aircraft conceptual design. ACSYNT has been successfully applied to high- speed civil transport configuration, subsonic transports, and supersonic fighters.

  15. Practical RF system design

    CERN Document Server

    Egan, William F

    2003-01-01

    he ultimate practical resource for today's RF system design professionals Radio frequency components and circuits form the backbone of today's mobile and satellite communications networks. Consequently, both practicing and aspiring industry professionals need to be able to solve ever more complex problems of RF design. Blending theoretical rigor with a wealth of practical expertise, Practical RF System Design addresses a variety of complex, real-world problems that system engineers are likely to encounter in today's burgeoning communications industry with solutions that are not easily available in the existing literature. The author, an expert in the field of RF module and system design, provides powerful techniques for analyzing real RF systems, with emphasis on some that are currently not well understood. Combining theoretical results and models with examples, he challenges readers to address such practical issues as: * How standing wave ratio affects system gain * How noise on a local oscillator will affec...

  16. ManiWordle: providing flexible control over Wordle.

    Science.gov (United States)

    Koh, Kyle; Lee, Bongshin; Kim, Bohyoung; Seo, Jinwook

    2010-01-01

    Among the multifarious tag-clouding techniques, Wordle stands out to the community by providing an aesthetic layout, eliciting the emergence of the participatory culture and usage of tag-clouding in the artistic creations. In this paper, we introduce ManiWordle, a Wordle-based visualization tool that revamps interactions with the layout by supporting custom manipulations. ManiWordle allows people to manipulate typography, color, and composition not only for the layout as a whole, but also for the individual words, enabling them to have better control over the layout result. We first describe our design rationale along with the interaction techniques for tweaking the layout. We then present the results both from the preliminary usability study and from the comparative study between ManiWordle and Wordle. The results suggest that ManiWordle provides higher user satisfaction and an efficient method of creating the desired "art work," harnessing the power behind the ever-increasing popularity of Wordle.

  17. The ethics of providing hope in psychotherapy.

    Science.gov (United States)

    Dembo, Justine Sarah; Clemens, Norman A

    2013-07-01

    The instillation of hope is a common factor in most psychotherapies. A considerable literature exists on the ethics of providing false or positively biased hope in non-psychiatric medical settings, and ethicists have generally concluded that this practice is unethical. However, the literature on the ethics of encouraging hope in psychotherapy, especially in the case of treatment-resistant mental illness, is sparse. The author explores two clinical cases with the intention of examining the nature of hope, false hope, positive illusions, and denial, as they relate to our definitions of mental health and psychotherapy. The cases highlight the ethics of balancing an acknowledgment of likely treatment futility with a desire to hope. Clinical psychological studies on depressive realism and optimistic bias indicate that some degree of positive bias, referred to by some authors as "the optimal margin of illusion," is in fact necessary to promote what we define as "good mental health;" conversely, stark realism is correlated with mild to moderate depression. An examination of the existential literature, including Ernest Becker's work, The Denial of Death, indicates that without the defense mechanism of denial, human beings tend to experience paralytic despair as a result of being fallible, mortal creatures in a frightening world. The combination of these diverse bodies of literature, along with the surprising outcomes of our case examples, leads to an unexpected conclusion: it may occasionally be ethical to encourage some degree of optimistic bias, and perhaps even positive illusion, when treating patients in psychotherapy.

  18. Can Economics Provide Insights into Trust Infrastructure?

    Science.gov (United States)

    Vishik, Claire

    Many security technologies require infrastructure for authentication, verification, and other processes. In many cases, viable and innovative security technologies are never adopted on a large scale because the necessary infrastructure is slow to emerge. Analyses of such technologies typically focus on their technical flaws, and research emphasizes innovative approaches to stronger implementation of the core features. However, an observation can be made that in many cases the success of adoption pattern depends on non-technical issues rather than technology-lack of economic incentives, difficulties in finding initial investment, inadequate government support. While a growing body of research is dedicated to economics of security and privacy in general, few theoretical studies in this area have been completed, and even fewer that look at the economics of “trust infrastructure” beyond simple “cost of ownership” models. This exploratory paper takes a look at some approaches in theoretical economics to determine if they can provide useful insights into security infrastructure technologies and architectures that have the best chance to be adopted. We attempt to discover if models used in theoretical economics can help inform technology developers of the optimal business models that offer a better chance for quick infrastructure deployment.

  19. Family benefits - Obligation to provide information

    CERN Multimedia

    HR Department

    2015-01-01

    Pursuant to Article R V 1.38 of the Staff Regulations, members of the personnel are reminded that they are required to inform the Organization in writing, within 30 calendar days, of any change in their family situation (marriage, partnership, birth of a child, etc.) and of the amount of any financial benefit of a similar nature to those provided for in the Staff Regulations (e.g. family allowance, child allowance, infant allowance, non-resident allowance or international indemnity) to which they or a member of their family may be entitled from a source other than CERN.   The procedures to be followed are available in the Admin e-guide: https://admin-eguide.web.cern.ch/en/procedure/change-family-situation Members of the personnel are also reminded that any false declaration or failure to make a declaration with a view to deceiving others or achieving a gain resulting in a loss of funds or reputation for CERN constitutes fraud and may lead to disciplinary action in accordance with Article S ...

  20. Dental practice satisfaction with preferred provider organizations

    Directory of Open Access Journals (Sweden)

    Schilling Elizabeth A

    2007-11-01

    Full Text Available Abstract Background Despite their increasing share of the dental insurance market, little is known about dental practices' satisfaction with preferred provider organizations (PPOs. This analysis examined practice satisfaction with dental PPOs and the extent to which satisfaction was a function of communications from the plan, claims handling and compensation. Methods Data were collected through telephone surveys with dental practices affiliated with MetLife between January 2002 and December 2004. Each respondent was asked a series of questions related to their satisfaction with a systematically selected PPO with which they were affiliated. Six different PPO plans had sufficient observations to allow for comparative analysis (total n = 4582. Multiple imputation procedures were used to adjust for item non-response. Results While the average level of overall satisfaction with the target plan fell between "very satisfied" and "satisfied," regression models revealed substantial differences in overall satisfaction across the 6 PPOs (p Conclusion Results demonstrate the importance of compensation to dental practice satisfaction with PPOs. However, these results also highlight the critical role of service-related factors in differentiating plans and suggest that there are important non-monetary dimensions of PPO performance that can be used to recruit and retain practices.

  1. Contingency management: perspectives of Australian service providers.

    Science.gov (United States)

    Cameron, Jacqui; Ritter, Alison

    2007-03-01

    Given the very positive and extensive research evidence demonstrating efficacy and effectiveness of contingency management, it is important that Australia explore whether contingency management has a role to play in our own treatment context. Qualitative interviews were conducted with 30 experienced alcohol and drug practitioners, service managers and policy-makers in Victoria. Interviewees were selected to represent the range of drug treatment services types and included rural representation. A semi-structured interview schedule, covering their perceptions and practices of contingency management was used. All interviews were transcribed verbatim and analysed using N2 qualitative data analysis program. The majority of key informants were positively inclined toward contingency management, notwithstanding some concerns about the philosophical underpinnings. Concerns were raised in relation to the use of monetary rewards. Examples of the use of contingency management provided by key informants demonstrated an over-inclusive definition: all the examples did not adhere to the key principles of contingency management. This may create problems if a structured contingency management were to be introduced in Australia. Contingency management is an important adjunctive treatment intervention and its use in Australia has the potential to enhance treatment outcomes. No unmanageable barriers were identified in this study.

  2. Providing effective supervision in clinical neuropsychology.

    Science.gov (United States)

    Stucky, Kirk J; Bush, Shane; Donders, Jacobus

    2010-01-01

    A specialty like clinical neuropsychology is shaped by its selection of trainees, educational standards, expected competencies, and the structure of its training programs. The development of individual competency in this specialty is dependent to a considerable degree on the provision of competent supervision to its trainees. In clinical neuropsychology, as in other areas of professional health-service psychology, supervision is the most frequently used method for teaching a variety of skills, including assessment, report writing, differential diagnosis, and treatment. Although much has been written about the provision of quality supervision in clinical and counseling psychology, very little published guidance is available regarding the teaching and provision of supervision in clinical neuropsychology. The primary focus of this article is to provide a framework and guidance for the development of suggested competency standards for training of neuropsychological supervisors, particularly at the residency level. In this paper we outline important components of supervision for neuropsychology trainees and suggest ways in which clinicians can prepare for supervisory roles. Similar to Falender and Shafranske (2004), we propose a competency-based approach to supervision that advocates for a science-informed, formalized, and objective process that clearly delineates the competencies required for good supervisory practice. As much as possible, supervisory competencies are related to foundational and functional competencies in professional psychology, as well as recent legislative initiatives mandating training in supervision. It is our hope that this article will foster further discussion regarding this complex topic, and eventually enhance training in clinical neuropsychology.

  3. Attitudes of Healthcare Providers towards Providing Contraceptives for Unmarried Adolescents in Ibadan, Nigeria

    OpenAIRE

    Ahanonu, Ezihe Loretta

    2014-01-01

    Objective This study sought to assess the attitude of Healthcare Providers towards providing contraceptives for unmarried adolescents in four Local Government Areas in Ibadan, Nigeria. Materials and methods A cross-sectional descriptive study was conducted among 490 Healthcare Providers in 24 randomly selected healthcare facilities using self-administered, pre-tested questionnaires. Results More than half (57.5%) of the respondents perceived the provision of contraceptives for unmarried adole...

  4. Smashing UX design foundations for designing online user experiences

    CERN Document Server

    Allen, Jesmond

    2012-01-01

    The ultimate guide to UX from the world's most popular resource for web designers and developers Smashing Magazine is the world's most popular resource for web designers and developers and with this book, the authors provide the pinnacle resource to becoming savvy with User Experience Design (UX). The authors first provide an overview of UX and chart its rise to becoming a valuable and necessary practice for narrowing the gap between Web sites, applications, and users in order to make a user's experience a happy, easy, and successful one.Examines the essential aspects of User Experience Design

  5. Are Anesthesia Providers Ready for Hypnosis? Anesthesia Providers' Attitudes Toward Hypnotherapy.

    Science.gov (United States)

    Stone, Alexander B; Sheinberg, Rosanne; Bertram, Amanda; Seymour, Anastasia Rowland

    2016-04-01

    This study sought to measure current attitudes toward hypnosis among anesthesia providers using an in-person survey distributed at a single grand rounds at a single academic teaching hospital. One hundred twenty-six anesthesia providers (anesthesiologists and nurse anesthetists) were included in this study. A 10-question Institutional Review Board (IRB)-approved questionnaire was developed. One hundred twenty-six (73% of providers at the meeting) anesthesia providers completed the survey. Of the respondents, 54 (43%) were anesthesiologists, 42 (33%) were trainees (interns/residents/fellows) in anesthesia, and 30 (24%) were nurse anesthetists. Over 70% of providers, at each level of training, rated their knowledge of hypnosis as either below average or having no knowledge. Fifty-two (42%) providers agreed or strongly agreed that hypnotherapy has a place in the clinical practice of anesthesia, while 103 (83%) believed that positive suggestion has a place in the clinical practice of anesthesia (p hypnosis were that it is too time consuming (41%) and requires special training (34%). Only three respondents (2%) believed that there were no reasons for using hypnosis in their practice. These data suggest that there is a self-reported lack of knowledge about hypnosis among anesthesia providers, although many anesthesia providers are open to the use of hypnosis in their clinical practice. Anesthesia providers are more likely to support the use of positive suggestion in their practice than hypnosis. Practical concerns should be addressed if hypnosis and therapeutic verbal techniques are to gain more widespread use.

  6. Mobilities Design

    DEFF Research Database (Denmark)

    Jensen, Ole B.; Lanng, Ditte Bendix

    Contemporary society is marked and defined by the ways in which mobile goods, bodies, vehicles, objects, and data are organized, moved and staged. On the background of the ‘mobilities turn’ (e.g. Cresswell 2006, Urry 2007) this book articulates a new and emerging research field, namely that of ‘m......Contemporary society is marked and defined by the ways in which mobile goods, bodies, vehicles, objects, and data are organized, moved and staged. On the background of the ‘mobilities turn’ (e.g. Cresswell 2006, Urry 2007) this book articulates a new and emerging research field, namely...... that of ‘mobilities design’. The book revolves around the following research question: How are design decisions and interventions staging mobilities? It builds upon the Staging Mobilities model (Jensen 2013) in an explorative inquiry into the problems and potentials of the design of mobilities. The exchange value...

  7. Mobilities Design

    DEFF Research Database (Denmark)

    Jensen, Ole B.; Lanng, Ditte Bendix

    2016-01-01

    of life’ for billions of people in the everyday life. This paper is structured in three parts. After the general introduction we present the mobilities theory perspective of ‘staging mobilities’ and connects this to the empirical phenomenon of parking lots and their design. The paper ends in section three......Contemporary society is marked and defined by the ways in which mobile goods, bodies, vehicles, objects, and data are organized, moved and staged. On the backgound of the ‘mobilities turn’ (for short review paper on this see; Sheller 2011, Vannini 2010) this paper proposes a further development...... of the perspective in the direction of a material and design oriented turn. In order to fulfill this purpose we articulate a new and emerging research field, namely that of ‘mobilities design’. In our understanding time has come to articulate ‘Mobilities Design’ as a dedicated research field in and of its own...

  8. Design Transformations

    DEFF Research Database (Denmark)

    Morrison, Ann; Knoche, Hendrik

    2014-01-01

    Purpose – Taking a case study approach, we synchronised two courses to focus on the students working with learning and applying tools in the one course and acting on understandings gained to produce artefacts in the other. Design/methodology/approach – Working with real users throughout all stages...... focused evaluation methods using tangible representations; identified the relationship from these findings for subsequent re-design rationales; and discussed and critiqued each other’s work using multiple feedback, teach-back and discursive strategies. Findings – We found that in-depth coverage...... of material, working with real data and users at all stages of assessment and producing visualisations from evaluations, naturally forced student motivation to act and redesign better solutions. We noted improved attendance and students reported high engagement and content appreciation. Research limitations...

  9. ITER conceptual design

    International Nuclear Information System (INIS)

    Tomabechi, K.; Gilleland, J.R.; Sokolov, Yu.A.; Toschi, R.

    1991-01-01

    The Conceptual Design Activities of the International Thermonuclear Experimental Reactor (ITER) were carried out jointly by the European Community, Japan, the Soviet Union and the United States of America, under the auspices of the International Atomic Energy Agency. The European Community provided the site for joint work sessions at the Max-Planck-Institut fuer Plasmaphysik in Garching, Germany. The Conceptual Design Activities began in the spring of 1988 and ended in December 1990. The objectives of the activities were to develop the design of ITER, to perform a safety and environmental analysis, to define the site requirements as well as the future research and development needs, to estimate the cost and manpower, and to prepare a schedule for detailed engineering design, construction and operation. On the basis of the investigation and analysis performed, a concept of ITER was developed which incorporated maximum flexibility of the performance of the device and allowed a variety of operating scenarios to be adopted. The heart of the machine is a tokamak having a plasma major radius of 6 m, a plasma minor radius of 2.15 m, a nominal plasma current of 22 MA and a nominal fusion power of 1 GW. The conceptual design can meet the technical objectives of the ITER programme. Because of the success of the Conceptual Design Activities, the Parties are now considering the implementation of the next phase, called the Engineering Design Activities. (author). Refs, figs and tabs

  10. Organization Design

    OpenAIRE

    Milton Harris; Artur Raviv

    2002-01-01

    This paper attempts to explain organization structure based on optimal coordination of interactions among activities. The main idea is that each manager is capable of detecting and coordinating interactions only within his limited area of expertise. Only the CEO can coordinate company wide interactions. The optimal design of the organization trades off the costs and benefits of various configurations of managers. Our results consist of classifying the characteristics of activities and manager...

  11. Designing Privacy-by-Design

    NARCIS (Netherlands)

    Rest, J.H.C. van; Boonstra, D.; Everts, M.H.; Rijn, M. van; Paassen, R.J.G. van

    2014-01-01

    The proposal for a new privacy regulation d.d. January 25th 2012 introduces sanctions of up to 2% of the annual turnover of enterprises. This elevates the importance of mitigation of privacy risks. This paper makes Privacy by Design more concrete, and positions it as the mechanism to mitigate these

  12. Development of Innovative Design Processor

    International Nuclear Information System (INIS)

    Park, Y.S.; Park, C.O.

    2004-01-01

    The nuclear design analysis requires time-consuming and erroneous model-input preparation, code run, output analysis and quality assurance process. To reduce human effort and improve design quality and productivity, Innovative Design Processor (IDP) is being developed. Two basic principles of IDP are the document-oriented design and the web-based design. The document-oriented design is that, if the designer writes a design document called active document and feeds it to a special program, the final document with complete analysis, table and plots is made automatically. The active documents can be written with ordinary HTML editors or created automatically on the web, which is another framework of IDP. Using the proper mix-up of server side and client side programming under the LAMP (Linux/Apache/MySQL/PHP) environment, the design process on the web is modeled as a design wizard style so that even a novice designer makes the design document easily. This automation using the IDP is now being implemented for all the reload design of Korea Standard Nuclear Power Plant (KSNP) type PWRs. The introduction of this process will allow large reduction in all reload design efforts of KSNP and provide a platform for design and R and D tasks of KNFC. (authors)

  13. Providing the Missing Link: the Exposure Science Ontology ...

    Science.gov (United States)

    Although knowledge-discovery tools are new to the exposure science community, these tools are critical for leveraging exposure information to design health studies and interpret results for improved public health decisions. Standardized ontologies define relationships, allow for automated reasoning, and facilitate meta-analyses. ExO will facilitate development of biologically relevant exposure metrics, design of in vitro toxicity tests, and incorporation of information on susceptibility and background exposures for risk assessment. In this approach, there are multiple levels of organization, from the global environment down through ecosystems, communities, indoor spaces, populations, organisms, tissues, and cells. We anticipate that the exposure science and environmental health community will adopt and contribute to this work, as wide acceptance is key to integration and federated searching of exposure data to support environmental and public health research. In particular, we anticipate acceptance of the concept that exposure science provides the spatial/temporal narrative about the intensity (concentration) of a stressor at the boundary between two systems: one functioning as an “environment” (stressor) and one functioning as a target (receptor). An agreed-upon exposure ontology with clear definitions and relationships should help to facilitate decision-making, study design and prioritization of research initiatives by enhancing the capacity for data colle

  14. Hand Washing Practices Among Emergency Medical Services Providers

    Directory of Open Access Journals (Sweden)

    Joshua Bucher

    2015-10-01

    Full Text Available Introduction: Hand hygiene is an important component of infection control efforts. Our primary and secondary goals were to determine the reported rates of hand washing and stethoscope cleaning in emergency medical services (EMS workers, respectively. Methods: We designed a survey about hand hygiene practices. The survey was distributed to various national EMS organizations through e-mail. Descriptive statistics were calculated for survey items (responses on a Likert scale and subpopulations of survey respondents to identify relationships between variables. We used analysis of variance to test differences in means between the subgroups. Results: There were 1,494 responses. Overall, reported hand hygiene practices were poor among pre-hospital providers in all clinical situations. Women reported that they washed their hands more frequently than men overall, although the differences were unlikely to be clinically significant. Hygiene after invasive procedures was reported to be poor. The presence of available hand sanitizer in the ambulance did not improve reported hygiene rates but improved reported rates of cleaning the stethoscope (absolute difference 0.4, p=0.0003. Providers who brought their own sanitizer were more likely to clean their hands. Conclusion: Reported hand hygiene is poor amongst pre-hospital providers. There is a need for future intervention to improve reported performance in pre-hospital provider hand washing.

  15. Hand Washing Practices Among Emergency Medical Services Providers.

    Science.gov (United States)

    Bucher, Joshua; Donovan, Colleen; Ohman-Strickland, Pamela; McCoy, Jonathan

    2015-09-01

    Hand hygiene is an important component of infection control efforts. Our primary and secondary goals were to determine the reported rates of hand washing and stethoscope cleaning in emergency medical services (EMS) workers, respectively. We designed a survey about hand hygiene practices. The survey was distributed to various national EMS organizations through e-mail. Descriptive statistics were calculated for survey items (responses on a Likert scale) and subpopulations of survey respondents to identify relationships between variables. We used analysis of variance to test differences in means between the subgroups. There were 1,494 responses. Overall, reported hand hygiene practices were poor among pre-hospital providers in all clinical situations. Women reported that they washed their hands more frequently than men overall, although the differences were unlikely to be clinically significant. Hygiene after invasive procedures was reported to be poor. The presence of available hand sanitizer in the ambulance did not improve reported hygiene rates but improved reported rates of cleaning the stethoscope (absolute difference 0.4, p=0.0003). Providers who brought their own sanitizer were more likely to clean their hands. Reported hand hygiene is poor amongst pre-hospital providers. There is a need for future intervention to improve reported performance in pre-hospital provider hand washing.

  16. Exploring Dental Providers' Workflow in an Electronic Dental Record Environment.

    Science.gov (United States)

    Schwei, Kelsey M; Cooper, Ryan; Mahnke, Andrea N; Ye, Zhan; Acharya, Amit

    2016-01-01

    A workflow is defined as a predefined set of work steps and partial ordering of these steps in any environment to achieve the expected outcome. Few studies have investigated the workflow of providers in a dental office. It is important to understand the interaction of dental providers with the existing technologies at point of care to assess breakdown in the workflow which could contribute to better technology designs. The study objective was to assess electronic dental record (EDR) workflows using time and motion methodology in order to identify breakdowns and opportunities for process improvement. A time and motion methodology was used to study the human-computer interaction and workflow of dental providers with an EDR in four dental centers at a large healthcare organization. A data collection tool was developed to capture the workflow of dental providers and staff while they interacted with an EDR during initial, planned, and emergency patient visits, and at the front desk. Qualitative and quantitative analysis was conducted on the observational data. Breakdowns in workflow were identified while posting charges, viewing radiographs, e-prescribing, and interacting with patient scheduler. EDR interaction time was significantly different between dentists and dental assistants (6:20 min vs. 10:57 min, p = 0.013) and between dentists and dental hygienists (6:20 min vs. 9:36 min, p = 0.003). On average, a dentist spent far less time than dental assistants and dental hygienists in data recording within the EDR.

  17. Patient-provider language concordance and colorectal cancer screening.

    Science.gov (United States)

    Linsky, Amy; McIntosh, Nathalie; Cabral, Howard; Kazis, Lewis E

    2011-02-01

    Patient-provider language barriers may play a role in health-care disparities, including obtaining colorectal cancer (CRC) screening. Professional interpreters and language-concordant providers may mitigate these disparities. DESIGN, SUBJECTS, AND MAIN MEASURES: We performed a retrospective cohort study of individuals age 50 years and older who were categorized as English-Concordant (spoke English at home, n = 21,594); Other Language-Concordant (did not speak English at home but someone at their provider's office spoke their language, n = 1,463); or Other Language-Discordant (did not speak English at home and no one at their provider's spoke their language, n = 240). Multivariate logistic regression assessed the association of language concordance with colorectal cancer screening. Compared to English speakers, non-English speakers had lower use of colorectal cancer screening (30.7% vs 50.8%; OR, 0.63; 95% CI, 0.51-0.76). Compared to the English-Concordant group, the Language-Discordant group had similar screening (adjusted OR, 0.84; 95% CI, 0.58-1.21), while the Language-Concordant group had lower screening (adjusted OR, 0.57; 95% CI, 0.46-0.71). Rates of CRC screening are lower in individuals who do not speak English at home compared to those who do. However, the Language-Discordant cohort had similar rates to those with English concordance, while the Language-Concordant cohort had lower rates of CRC screening. This may be due to unmeasured differences among the cohorts in patient, provider, and health care system characteristics. These results suggest that providers should especially promote the importance of CRC screening to non-English speaking patients, but that language barriers do not fully account for CRC screening rate disparities in these populations.

  18. Fundamental Principles of Alarm Design

    DEFF Research Database (Denmark)

    Us, Tolga; Jensen, Niels; Lind, Morten

    2011-01-01

    Traditionally alarms are designed on the basis of empirical guidelines rather than on a sound scientific framework rooted in a theoretical foundation for process and control system design. This paper proposes scientific principles and a methodology for design of alarms based on a functional...... be applied to any engineering system which can be modeled by MFM. The methodology provides a set of alarms which can facilitate event interpretation and operator support for abnormal situation management. The proposed design methodology provides the information content of the alarms, but does not deal...

  19. Decision-Based Design Integrating Consumer Preferences into Engineering Design

    CERN Document Server

    Chen, Wei; Wassenaar, Henk Jan

    2013-01-01

    Building upon the fundamental principles of decision theory, Decision-Based Design: Integrating Consumer Preferences into Engineering Design presents an analytical approach to enterprise-driven Decision-Based Design (DBD) as a rigorous framework for decision making in engineering design.  Once the related fundamentals of decision theory, economic analysis, and econometrics modelling are established, the remaining chapters describe the entire process, the associated analytical techniques, and the design case studies for integrating consumer preference modeling into the enterprise-driven DBD framework. Methods for identifying key attributes, optimal design of human appraisal experiments, data collection, data analysis, and demand model estimation are presented and illustrated using engineering design case studies. The scope of the chapters also provides: •A rigorous framework of integrating the interests from both producer and consumers in engineering design, •Analytical techniques of consumer choice model...

  20. Backfill design 2012

    International Nuclear Information System (INIS)

    Autio, J.; Hassan, M. M.; Karttunen, P.; Keto, P.

    2013-12-01

    This report describes both the concept and the detailed design of backfilling in KBS-3V deposition tunnels. The purpose of the backfill is to keep the buffer in place, maintain favourable and predictable conditions for the buffer and the canister, and also favourable rock mechanical, hydrological and geochemical conditions in the near-field and to retard the transport of released radionuclides in case of canister failure. In addition to the description of the overall backfill design, detailed designs for the components of the backfill (foundation, block and pellet fill) are provided in this report. The deposition tunnel end plug design is not presented in this document. In the backfill design, the deposition tunnels are to be filled with a foundation layer material, precompacted clay blocks and extruded bentonite pellets. The foundation layer consists of Milos bentonite granules, which are compacted in situ in order to level the deposition tunnel floor, providing an even and stable base for the block filling. On the foundation layer, a rigid assemblage of overlapping layers of pre-compacted blocks made of Friedland clay are installed. The void space between the blocks and the rock wall is filled with extruded pellets made of bentonite similar to raw material of Cebogel QSE product. (orig.)