Does olfactory specific satiety take place in a natural setting?

Science.gov (United States)

Fernandez, P; Bensafi, M; Rouby, C; Giboreau, A

2013-01-01

Olfactory-specific satiety (OSS) is characterized by a specific decrease in the odor pleasantness of a food eaten to satiety or smelled without ingestion. The usual protocol for studying OSS takes place in laboratory, a setting rather removed from the real world. Here, we set out to examine OSS in a natural setting: during a meal in a restaurant. We hypothesized that an aroma contained in a food that is eaten at the beginning of a meal decreases the pleasantness of the flavor of a food with the same aroma eaten at the end of the meal. In the first experiment (Experiment 1), a test group received an appetizer flavored with a test aroma (anise) at the beginning of the meal. After the main dish, they received a dessert flavored with the same aroma. A control group received the same aromatized dessert, but after a non-aromatized appetizer. This experiment was replicated (Experiment 2) using verbena as the test aroma. For both experiments, results revealed that aroma pleasantness, but not intensity or familiarity, significantly decreased in the test groups vs. the control groups. These findings extend the concept of OSS to a realistic eating context. Copyright © 2012 Elsevier Ltd. All rights reserved.

PALEOBATHYMETRIC INTERPRETATION OF THE FISH OTOLITHS FROM THE LOWER - MIDDLE QUATERNARY DEPOSITS OF KEPHALLONIA AND ZAKYNTHOS ISLANDS (IONIAN SEA, WESTERN GREECE

Directory of Open Access Journals (Sweden)

KONSTANTINA AGIADI

2010-03-01

Full Text Available Fish otoliths are herein used to estimate the depositional depth of the Early - Middle Pleistocene deposits at SE Zakynthos and SW Kephallonia Islands (Ionian Sea, Western Greece, through comparison with the modern bathymetric distributions of the identified fish taxa. These estimates provide a more detailed picture of the depth variations for the Gelasian - Ionian stage interval in the study areas. The Lower Pleistocene marine deposits of the Gerakas Formation (SE Zakynthos Island, Ionian Sea were deposited at average depths of 400-450 meters, with eustacy playing an important role in the depth variability, between 1.95-1.73 Ma. An uplifting episode, followed by subsidence takes place between 1.73-1.66 Ma, taking the area to 200-300 meters of depth, and then back to 400-500 meters. However, the area seems uplifted again to 200-400 meters later on in the Calabrian stage (1.25-0.97 Ma. Sedimentation of the Akrotiri deposits (NW Kephallonia Island, Ionian Sea, during the same chronostratigraphic interval, took place in a similar setting. At the Early Pleistocene (1.95-1.73 Ma this basin reached depths of 400-450 meters, with uplift and following subsidence taking place between 1.73-1.66 Ma. Overall, the application of fish otolith paleobathymetry in the study areas provide a detailed picture of the depth variations for the Early Quaternary interval and refine the currently hypothesized pattern of tectonic movements. 

Comparison between radical- and energetic ion-induced growth of SiCxNy films in plasma immersion ion implantation and deposition

International Nuclear Information System (INIS)

Afanasyev-Charkin, I.V.; Nastasi, M.

2004-01-01

Ternary SiC x N y compounds are materials with some remarkable properties such as high oxidation resistance and high hardness. In this work we compare the properties of SiC x N y films obtained using radio-frequency (rf) and pulsed glow discharge (PGD) plasmas with combinations of SiH 4 , C 2 H 2 , N 2 , and Ar source gases. The pulsed voltage used for the rf deposition was 200 V and for the PGD deposition it was 4 kV. During the rf growth, the growth takes place mostly by attaching neutral radicals to form chemical bonds. In the PGD method, the deposition takes place by subplantation and surface activation by energetic ions. We show that in the case of low-energy RF deposition, a high relative number of C-N bonds with sp 3 hybridization is formed and very few Si-C bonds can be observed. Apparently the growth of carbon nitride and silicon nitride networks takes place independently. This indicates that SiH 3 radicals attach to the dangling bonds of silicon and nitrogen, whereas C 2 H radicals attach to the dangling bonds of carbon and nitrogen. During pulsed glow discharge deposition, bonds between all three components are formed apparently by means of subplantation and damage-induced disorder. The hardness of the PGD films exceed that of the RF films, showing that to form a dense SiC x N y film one has to either supply energy during the growth of the films by heating the substrate, as in the case of chemical vapor deposition or by using energetic ions

Understanding Where Americas Public Discussion Takes Place In Todays Society: Case Studies of Concealed Weapons Carry Reform

Science.gov (United States)

2016-06-01

arguing that concealed carry permit holders are a danger to public safety and that mass shootings are taking place by citizens who are legally armed.2...who worked at an abortion clinic that had recently been bombed and whose life had been threatened was denied a license to carry because he was not...populace. The new law laid out new prohibitions and penalties enforceable statewide. Additionally, the Preemption Act was necessary to set the legal

Tungsten deposition by hydrogen-atom reaction with tungsten hexafluoride

International Nuclear Information System (INIS)

Lee, W.W.

1991-01-01

Using gaseous hydrogen atoms with WF 6 , tungsten atoms can be produced in a gas-phase reaction. The atoms then deposit in a near-room temperature process, which results in the formation of tungsten films. The W atoms (10 10 -10 11 /cm 3 ) were measured in situ by atomic absorption spectroscopy during the CVD process. Deposited W films were characterized by Auger electron spectroscopy, Rutherford backscattering, and X-ray diffraction. The surface morphology of the deposited films and filled holes was studied using scanning electron microscopy. The deposited films were highly adherent to different substrates, such as Si, SiO 2 , Ti/Si, TiN/Si and Teflon. The reaction mechanism and kinetics were studied. The experimental results indicated that this method has three advantages compared to conventional CVD or PECVD: (1) film growth occurs at low temperatures; (2) deposition takes place in a plasma-free environment; and (3) a low level of impurities results in high-quality adherent films

Thin Places

OpenAIRE

Lockwood, Sandra Elizabeth

2013-01-01

This inquiry into the three great quests of the twentieth century–the South Pole, Mount Everest, and the Moon–examines our motivations to venture into these sublime, yet life-taking places. The Thin Place was once the destination of the religious pilgrim seeking transcendence in an extreme environment. In our age, the Thin Place quest has morphed into a challenge to evolve beyond the confines of our own physiology; through human ingenuity and invention, we reach places not meant to accommod...

Thermodynamics of a natural draught-cooled container deposit for radioactive materials

International Nuclear Information System (INIS)

Schoenfeld, R.; Dorst, H.J.

1982-01-01

This article interprets a calculation model for the determination of heat dissipation and temperature distribution of cooling air within an intermediate container deposit cooled with air by natural draught for self-heating materials. The mathematical modelling of the physical processes in the flowing medium 'air' takes place stationarily and one-dimensionelly in flow direction. The calculation model is based on known procedures for the convective heat transmission, for the description of channel flow, and for the determination of pressure losses. It provides the thermodynamic characteristic data which are required for an engineering and safety design of a container deposit. (orig.) [de

Let us play: (unshackling liaisons, (unmasking games and (unhindered dialogue in the arena where theology takes place

Directory of Open Access Journals (Sweden)

Tanya van Wyk

2017-10-01

Full Text Available This contribution is a political-theological and hermeneutical reflection on the origin, nature, intention and contribution of a research theme identified within the dynamics of an institutional space, by taking a critical look at the �rules� and the �game� of university academia. Specific reference is made to institutional and faculty research themes, namely �reconciling diversity� and �Ecodomy � life in its fullness�. The institutional academic space is compared to a Hunger Games-style panopticon, with its �rules� and �play�. It is argued that these research themes can only make an authentic contribution if the �play� and �game�of the space in which these themes originate, are deconstructed. If this deconstruction can take place, there might be an authentic chance for unhindered dialogue towards the transformation of the academic space and the greater community it serves.

Taking back place-names – from dusty library to digital life

DEFF Research Database (Denmark)

Knudsen, Bo Nissen

Danish place-names have been under publication since 1922 in the scientific series Danmarks Stednavne (Place-Names of Denmark) but only recently the huge project of a digitization of the series has been undertaken. Around 120,000 name articles are now on their way to the web as part of the Digital...... atlas of the Danish historical-administrative geography. Digitization and presentation of a scientific place-names edition poses many interesting problems in itself, especially regarding the variation over time in both the selection of names and the build-up of scholarly knowledge. How are we to convey...... mobility of the book format into a digital context – by making the content available as an application for mobile devices such as smart phones and iPads? Adding geocodes to the name articles could open up the possibility of a digital place-name lexicon allowing the end user to move around in a place...

Inhalation of nanoplatelets - Theoretical deposition simulations.

Science.gov (United States)

Sturm, Robert

2017-12-01

Primary objective of the contribution was the theoretical prediction of nanoplatelet deposition in the human respiratory tract. Modeling was founded on the hypothetical inhalation of graphene nanoplatelets (GNP) measuring 0.01 and 0.1μm in thickness and adopting a projected area diameter of 1-30μm. Particle uptake was assumed to take place with inhalation flow rates of 250, 500, 750, and 1000cm 3 s -1 , respectively. For an appropriate description of pulmonary particle behavior, transport of GNP in a stochastic lung structure and deposition formulae based on analytical and numerical studies were presupposed. The results obtained from the theoretical approach clearly demonstrate that GNP with a thickness of 0.01μm deposit in the respiratory tract by 20-50%, whereas GNP with a thickness of 0.1μm exhibit a deposition of 20-90%. Larger platelets deposit with higher probability than small ones. Increase of inhalation flow rate is accompanied by decreased deposition in the case of thin GNP, whilst thicker GNP are preferably accumulated in the extrathoracic region. Generation-specific deposition ranges from 0.05 to 7% (0.01μm) and from 0.05 to 9%, with maximum values being obtained in airway generation 20. In proximal airway generations (0-10), deposition is increased with inhalation flow rate, whereas in intermediate to distal generations a reverse effect may be observed. Health consequences of GNP deposition in different lung compartments are subjected to an intense debate. Copyright © 2017. Published by Elsevier GmbH.

Structural characterization of MAPLE deposited lipase biofilm

Energy Technology Data Exchange (ETDEWEB)

Aronne, Antonio [Department of Chemical Engineering, Materials and Industrial Production, Università degli Studi di Napoli Federico II, Piazzale V. Tecchio 80, 80125 Napoli (Italy); Ausanio, Giovanni; Bloisi, Francesco [CNR-SPIN and Department of Physics, Università degli Studi di Napoli Federico II, Piazzale V. Tecchio 80, 80125 Napoli (Italy); Calabria, Raffaela [Istituto Motori-CNR, via G. Marconi 8, 80125 Napoli (Italy); Califano, Valeria, E-mail: v.califano@im.cnr.it [Istituto Motori-CNR, via G. Marconi 8, 80125 Napoli (Italy); Fanelli, Esther [Department of Chemical Engineering, Materials and Industrial Production, Università degli Studi di Napoli Federico II, Piazzale V. Tecchio 80, 80125 Napoli (Italy); Massoli, Patrizio [Istituto Motori-CNR, via G. Marconi 8, 80125 Napoli (Italy); Vicari, Luciano R.M. [CNR-SPIN and Department of Physics, Università degli Studi di Napoli Federico II, Piazzale V. Tecchio 80, 80125 Napoli (Italy)

2014-11-30

Highlights: • Lipase from Candida Rugosa was deposited by Matrix Assisted Pulsed Laser Evaporation (MAPLE) on KBr pellets, mica and glass substrate. • The deposited film was characterized morphologically and structurally by optical microscopy, SEM and FTIR analysis. • Results of characterization underlined a phenomenon of aggregation taking place. • The aggregation phenomenon was reversible since lipase showed activity in the transesterification reaction between soybean oil and isopropyl alcohol once detached from the substrate. - Abstract: Lipases (triacylglycerol ester hydrolases) are enzymes used in several industrial applications. Enzymes immobilization can be used to address key issues limiting widespread application at industrial level. Immobilization efficiency is related to the ability to preserve the native conformation of the enzyme. MAPLE (Matrix Assisted Pulsed Laser Evaporation) technique, a laser deposition procedure for treating organic/polymeric/biomaterials, was applied for the deposition of lipase enzyme in an ice matrix, using near infrared laser radiation. Microscopy analysis showed that the deposition occurred in micrometric and submicrometric clusters with a wide size distribution. AFM imaging showed that inter-cluster regions are uniformly covered with smaller aggregates of nanometric size. Fourier transform infrared spectroscopy was used for both recognizing the deposited material and analyzing its secondary structure. Results showed that the protein underwent reversible self-association during the deposition process. Actually, preliminary tests of MAPLE deposited lipase used for soybean oil transesterification with isopropyl alcohol followed by gas chromatography–mass spectrometry gave results consistent with undamaged deposition of lipase.

Boiling of water in flow restricted areas modeled by colloidal silica deposits

International Nuclear Information System (INIS)

Peixinho, Jorge; Lefevre, Gregory; Coudert, Francois-Xavier; Hurisse, Olivier

2012-09-01

Understanding the effects of particle deposits on evaporation and boiling of water represents an important issue for EDF because it causes a severe reduction in efficiency particularly in steam generators of pressurized water reactor. These deposits are made of oxide metallic particles and the deposition process depends on multiple factors. Here we mimic deposits using a simple system made of hydrophilic silica particles. The present study reports experiments on evaporation or boiling of water confined in the pores of colloidal mono-dispersed silica micro-sphere deposits. The boiling of water confined in the pores of the colloidal crystal is studied using optical microscopy, scanning electron microscopy, nitrogen adsorption, water adsorption through infrared attenuated total reflectance spectroscopy, differential scanning calorimetry and thermal gravimetric analysis. By comparison of the results with silica deposits and alumina membranes with cylindrical pores, our study shows that the morphology of the pores contributes to the evaporation and boiling of water. The measurements suggest that particle resuspension and crust formation take place during drying at elevated temperature and are responsible for cracks formation within the deposit film. (authors)

Exploration for in situ leach amenable sandstone uranium deposits and their impact on the environment in China

International Nuclear Information System (INIS)

Zhang Weixing

2002-01-01

Taking the No. 512 uranium deposit in YiLi Basin, Xinjiang as an example, this paper describes the ore-forming geological settings of inter-layer oxidizing zone roll-front type of ISL amenable uranium deposits. It also summarizes the different exploration methods used during various stages of exploration. The paper also introduces the Dabu uranium deposit in Taoshan, Jiangxi, which is amenable to the in-place-leach mining method. It probes into the possibilities for transforming non-economic and sub-economic uranium deposits into economical and minable ones. In addition, the paper emphasizes that ISL uranium mining, when compared with conventional mining, plays an active role in reducing environmental contamination and restoring ecological balance. (author)

Young People Take Their Rightful Places as Full and Contributing Members of a World Class Workforce: Philadelphia Youth Network Annual Report 2006

Science.gov (United States)

Philadelphia Youth Network, 2006

2006-01-01

The title of this year's annual report has particular meaning for all of the staff at the Philadelphia Youth Network. The phrase derives from Philadelphia Youth Network's (PYN's) new vision statement, developed as part of its recent strategic planning process, which reads: All of our city's young people take their rightful places as full and…

What it Takes to Successfully Implement Technology for Aging in Place: Focus Groups With Stakeholders.

Science.gov (United States)

Peek, Sebastiaan Theodorus Michaël; Wouters, Eveline J M; Luijkx, Katrien G; Vrijhoef, Hubertus J M

2016-05-03

There is a growing interest in empowering older adults to age in place by deploying various types of technology (ie, eHealth, ambient assisted living technology, smart home technology, and gerontechnology). However, initiatives aimed at implementing these technologies are complicated by the fact that multiple stakeholder groups are involved. Goals and motives of stakeholders may not always be transparent or aligned, yet research on convergent and divergent positions of stakeholders is scarce. To provide insight into the positions of stakeholder groups involved in the implementation of technology for aging in place by answering the following questions: What kind of technology do stakeholders see as relevant? What do stakeholders aim to achieve by implementing technology? What is needed to achieve successful implementations? Mono-disciplinary focus groups were conducted with participants (n=29) representing five groups of stakeholders: older adults (6/29, 21%), care professionals (7/29, 24%), managers within home care or social work organizations (5/29, 17%), technology designers and suppliers (6/29, 21%), and policy makers (5/29, 17%). Transcripts were analyzed using thematic analysis. Stakeholders considered 26 different types of technologies to be relevant for enabling independent living. Only 6 out of 26 (23%) types of technology were mentioned by all stakeholder groups. Care professionals mentioned fewer different types of technology than other groups. All stakeholder groups felt that the implementation of technology for aging in place can be considered a success when (1) older adults' needs and wishes are prioritized during development and deployment of the technology, (2) the technology is accepted by older adults, (3) the technology provides benefits to older adults, and (4) favorable prerequisites for the use of technology by older adults exist. While stakeholders seemed to have identical aims, several underlying differences emerged, for example, with regard

[Marketing approval and market surveillance of medical devices in Germany: Where does policy integration take place?].

Science.gov (United States)

Lang, Achim

2014-01-01

Since 2011 new regulatory measures regarding medical devices have been set up with the aim to eliminate obstacles to innovations and to find more coordinated ways to marketing authorisation and market surveillance. This essay investigates whether these new and existing coordination mechanisms build up to a Joined-up Government approach. The analysis shows that the regulatory process should be adjusted along several dimensions. First, many organisations lack awareness regarding their stakeholders and focus solely on their immediate organisational activities. Second, the regulatory process (marketing authorisation and market surveillance) is too fragmented for an effective communication to take place. Finally, the underlying strategy process is an ad-hoc approach lacking continuity and continued involvement of, in particular, the responsible federal ministries. Copyright © 2013. Published by Elsevier GmbH.

Preservation of Urban Archaeological Deposits: monitoring and characterisation of archaeological deposits at Marks & Spencer, 44-45 Parliament Street, York

Directory of Open Access Journals (Sweden)

M. Davis

2002-03-01

Full Text Available The City of York Council has been pursuing a strict policy of in situ preservation of archaeological deposits since April 1990. Planning consent is normally granted in the historic core of York for a new development so long as less than 5% of the archaeological deposits that are preserved on a site are destroyed. During archaeological evaluation work carried out as part of the redevelopment and expansion proposals for Marks & Spencer plc on Parliament Street, deposit monitoring devices were installed to investigate and monitor both the character of the archaeological deposits present and also the burial environment surrounding them (of particular importance because the burial environment, in terms both of its characteristics and stability, is thought to play a vital role in the preservation in situ of a site's archaeological deposits. The monitoring programme was undertaken between June 1995 and April 1998. As a result the data from a total of 30 site visits have been collected and are presented in this report. This article discusses results of the deposit monitoring project and presents evidence of changes that appear to be taking place in the archaeological deposits. Although the lower deposits at Parliament Street are stable, the upper deposits show considerable seasonal variations. The concept of preservation of archaeological deposits in situ is now deeply embedded both in Codes of Professional Conduct (IFA Code of Conduct and in national policy guidance (PPG 16. However, this emphasis on preservation in situ has been criticised. Does conservation archaeology in general and the City of York policy in particular achieve the preservation of the remaining 95% of the archaeology? Or are these deposits condemned to unseen, unrecorded destruction, sealed below new buildings; indeed if this is the case, shouldn't these deposits be excavated now while they are still viable?

Contribution to the study of tracheobronchial and pulmonary deposits in 52 subjects after inhalation of radioactive particles

International Nuclear Information System (INIS)

Lange, Pierre.

1980-03-01

Particle deposits in the bronchopulmonary system can lead to three main types of disorder: pneumoconioses, bronchial cancers and most chronic bronchopulmonary diseases. The study of deposition is useful for the prevention, diagnosis and treatment of these illnesses. The air-borne contaminants laid down are cleared by different mechanisms corresponding roughly to distinct anatomical regions. Short-term clearance, known as tracheobronchial (TB) takes place in a few hours, while long-term clearance from the deep lung is much slower: according to the International Radiological Protection Commission, 60% of particles deposited in the bronchiolo-alveolar region take more than 500 days to eliminate. It is useful therefore to known in what proportions the particles are fixed in the tracheobronchial region and on the deep lung. This was the purpose of the present work. The distribution of the deposit between these two regions was measured in 52 subjects having breathed in radioactive particles (indium 111). A functional respiratory study was conducted at the same time to find out whether the two sets of experimental data are related in any way [fr

Connecting people to place

NARCIS (Netherlands)

Horlings, L.G.

2016-01-01

The article describes a process of preparing a research design on place-shaping, as outcome of a process of co-design between academic actors and non-academic actors in Brazil, South Africa and The Netherlands, taking place in the context of the project TRANSPLACE. The joint research design

DSC Studies of Retrogradation and Amylose-Lipid Complex Transition Taking Place in Gamma Irradiated Wheat Starch

International Nuclear Information System (INIS)

Ciesla, K.

2006-01-01

Degradation resulting from gamma irradiation induces decrease in order of starch granules and influences the processes occurring in starch-water system. Differential scanning calorimetry (DSC) was applied at present for studying the effect of radiation with doses of 5 - 30 kGy on amylose-lipid complex transition and retrogradation occurring in wheat starch gels. Influence of the conditions applied during DSC measurements and intermediate storage was tested on the possibility to observe radiation effect. Wheat starch was irradiated with 60 C o gamma rays in a gamma cell Issledovatiel placed in the Department of Radiation Chemistry, INCT. DSC measurements were performed for ca. 50% and ca. 20% gels during heating - cooling - heating cycles (up to 3 cycles) in the temperature range 10 - 150 degree at heating and cooling rates of 10, 5 and 2.5 degree min - 1. The Seiko DSC 6200 calorimeter was used. Decrease in amylose-lipid complex transition temperature was found already after irradiation of wheat starch with a dose of 5 kGy showing modificatin of the complex structure. The differences between the irradiated and the non-irradiated samples became the easier seen in the every foregoing heating or cooling cycle as compared to the preceeding one. It is because that thermal treatment causes decrease of transition temperature in all the irradiated samples, with no effect or increase of that temperature observed in the non-irradiated ones. Irradiation hinders retrogradation taking place in ca. 50% gels but facilitates retrogradation occurring in ca. 20 % gels. Moreover, the expanded differences between the amylose-lipid complex formed in the irradiated and non-irradiated gels result due to their recrystallisation. Storage of the gels induces decrease in the temperature of the complex transition as compared to the last cycle of the first analysis. That decrease was, however, more significant in the case of all the irradiated samples than in the case of the initial sample. In

A comparative study of electrochemical and optical properties of rhenium deposited on gold and platinum

Energy Technology Data Exchange (ETDEWEB)

Zerbino, Jorge O.; Castro Luna, Ana M.; Martins, M. E. [Consejo Nacional de Investigaciones Cientificas y Tecnicas (CONICET), Buenos Aires (Argentina). Inst. de Investigaciones Fisico-Quimicas, Teoricas y Aplicadas (INIFTA)]. E-mail: mmartins@inifta.unlp.edu.ar; Zinola, Carlos F.; Mendez, Eduardo [Universidad de la Republica, Montevideo (Uruguay). Facultad de Ciencias. Lab. de Electroquimica Fundamental

2002-08-01

Rhenium-containing films were grown on gold and platinum after different potentiostatic and potentiodynamic polarizations in the - 0.20 V to 0.70 V range (vs rhe) in aqueous acid perrhenate. Experimental data were obtained using cyclic voltammetry and ellipsometry, from which the thickness and optical indices of the electrodeposited rhenium layer were calculated. Metallic rhenium deposition on gold takes place at potentials within the hydrogen evolution reaction. Rhenium oxide on platinum is formed in the hydrogen adatom potential domain, whereas metallic rhenium is deposited concurrently with the hydrogen adsorption and evolution reactions on the same metal. (author)

A comparative study of electrochemical and optical properties of rhenium deposited on gold and platinum

Directory of Open Access Journals (Sweden)

Zerbino Jorge O.

2002-01-01

Full Text Available Rhenium-containing films were grown on gold and platinum after different potentiostatic and potentiodynamic polarizations in the - 0.20 V to 0.70 V range (vs rhe in aqueous acid perrhenate. Experimental data were obtained using cyclic voltammetry and ellipsometry, from which the thickness and optical indices of the electrodeposited rhenium layer were calculated. Metallic rhenium deposition on gold takes place at potentials within the hydrogen evolution reaction. Rhenium oxide on platinum is formed in the hydrogen adatom potential domain, whereas metallic rhenium is deposited concurrently with the hydrogen adsorption and evolution reactions on the same metal.

Manufacture of Bi-cuprate thin films on MgO single crystal substrates by chemical solution deposition

DEFF Research Database (Denmark)

Grivel, Jean-Claude; Bertelsen, Christian Vinther; Andersen, Niels Hessel

2014-01-01

Bi2Sr2CaCu2O8 thin films have been deposited on MgO single crystal substrates by spin-coating a solution based on 2-ethylhexanoate precursors dissolved in xylene. Pyrolysis takes place between 200°C and 450°C and is accompanied by the release of 2-ethylhexanoic acid, CO2 and H2O vapour. Highly c...

The albedo problem in the case of multiple synthetic scattering taking place in a plane-symmetric slab

International Nuclear Information System (INIS)

Shafiq, A.; Meyer, H.E. de; Grosjean, C.C.

1985-01-01

An approximate model based on an improved diffusion-type theory is established for treating multiple synthetic scattering in a homogeneous slab of finite thickness. As in the case of the exact treatment given in the preceding paper (Part I), it appears possible to transform the considered transport problem into an equivalent fictitious one involving multiple isotropic scattering, therefore permitting the application of an established corrected diffusion theory for treating isotropic scattering taking place in a convex homogeneous medium bounded by a vacuum in the presence of various types of sources. The approximate values of the reflection and transmission coefficients are compared with the rigorous values listed in Part I. In this way, the high accuracy of the approximation is clearly demonstrated. (author)

Mechanisms controlling temperature dependent mechanical and electrical behavior of SiH4 reduced chemically vapor deposited W

International Nuclear Information System (INIS)

Joshi, R.V.; Prasad, V.; Krusin-Elbaum, L.; Yu, M.; Norcott, M.

1990-01-01

The effects of deposition temperature on growth, composition, structure, adhesion properties, stress, and resistivity of chemically vapor deposited W deposited purely by SiH 4 reduction of WF 6 are discussed. At lower deposition temperatures, due to incomplete Si reduction reaction, a small amount of Si is incorporated in the film. This elemental Si in W is responsible for the observed high stresses and high resistivities over a wide temperature range. With the increase in the deposition temperature, the conversion of incorporated Si as well as the initial Si reduction are taking place, stimulating increased grain growth and thereby relieving stress and reducing resistivity. The optimum values for stress and resistivity are achieved around 500 degree C, as Si content is at its minimum. At higher temperatures the reaction between residual Si and W, is the prime cause of resistivity increase

THE SECRETS OF MASSIVE SULFIDE DEPOSITS ON MID-OCEAN RIDGES AND KÜRE- MAĞARADORUK COPPER DEPOSIT

Directory of Open Access Journals (Sweden)

Yılmaz ALTUN

2015-07-01

Full Text Available Küre region is located in western part of the Pontide tectonic belt. The oldest rocks around Küre are Paleozoic metamorphic rocks constituting “Rhodope-Pontide” continent. Liassic-pre Liassic ophiolites and basaltic volcanics, which form Paleotethys Ocean Floor are situated on “Rhodope-Pontide” continent as Paleotethys Ocean Floor residuals. Massive sulfide deposits in Küre Region are closely associated with pre Liassic – Liassic basaltic volcanics and inter- calating black shale. These deposits are considered to have formed during hydrothermal mi- neralization processes when basaltic volcanism had stopped and defined as “Black Smoker” today. Massive sulfide bodies in Mağaradoruk copper deposits are lens shaped. Although ore lenses take place sometimes in basalts and black shales, they are generally located on basalts and are covered by black shales. In Küre region, fold structures are intensely observed, and Mağaradoruk deposit is located on western flank of an overturned anticline. Mağaradoruk deposit is formed by several small and a big ore body and by less developed, underlying stockwork disseminated ore. The big ore body is 600 m long, 250 m wide and nearly 40 m thick. As main ore minerals; pyrite and chalcopyrite are observed. In few amounts; marcasite, magnetite, hematite, sphalerite, covelline, neo-digenite, malachite, azurite, fahlers are seen. In fewer amounts; bravoite, lineiite (karolite, limonite, and in trace amounts; chromite, rutile anatase, chalcosine, cuprite, tenorite, pyrrhotite, valleriite, bornite, galenite, native copper and native gold are observed. Main gangue minerals are; quartz, siderite-ankerite calcite, dolomite and chlorite. Mağaradoruk massive sulfide deposit rocks resembles to Siirt Madenköy, Ergani massive sulfide deposits, to “Cyprus” type massive sulfide deposits and modern Cyprus type massive sulfide deposits in terms of mineral contents; and to Ergani Mihrapdağı, Papuke, Pakotai

Vapor-deposited non-crystalline phase vs ordinary glasses and supercooled liquids: Subtle thermodynamic and kinetic differences

International Nuclear Information System (INIS)

Bhattacharya, Deepanjan; Sadtchenko, Vlad

2015-01-01

Vapor deposition of molecules on a substrate often results in glassy materials of high kinetic stability and low enthalpy. The extraordinary properties of such glasses are attributed to high rates of surface diffusion during sample deposition, which makes it possible for constituents to find a configuration of much lower energy on a typical laboratory time scale. However, the exact nature of the resulting phase and the mechanism of its formation are not completely understood. Using fast scanning calorimetry technique, we show that out-of-equilibrium relaxation kinetics and possibly the enthalpy of vapor-deposited films of toluene and ethylbenzene, archetypical fragile glass formers, are distinct from those of ordinary supercooled phase even when the deposition takes place at temperatures above the ordinary glass softening transition temperatures. These observations along with the absolute enthalpy dependences on deposition temperatures support the conjecture that the vapor-deposition may result in formation of non-crystalline phase of unique structural, thermodynamic, and kinetic properties

Electrophoretic deposition (EPD) of multi-walled carbon nano tubes (MWCNT) onto indium-tin-oxide (ITO) glass substrates

International Nuclear Information System (INIS)

Mohd Roslie Ali; Shahrul Nizam Mohd Salleh

2009-01-01

Full text: Multi-Walled Carbon Nano tubes (MWCNT) were deposited onto Indium-Tin-Oxide (ITO)-coated glass substrates by introducing the use of Electrophoretic Deposition (EPD) as the method. The Multi-Walled Carbon Nano tubes (MWCNT) were dispersed ultrasonically in ethanol and sodium hydroxide (NaOH) to form stable suspension. The addition of Sodium Hydroxide in ethanol can stabilize the suspension, which was very important step before the deposition take place. Two substrates of Indium-Tin-Oxide(ITO)-coated glass placed in parallel facing each other (conductive side) into the suspension. The deposition occurs at room temperature, which the distance fixed at 1 cm between both electrodes and the voltage level applied was fixed at 400 V, respectively. The deposition time also was fixed at 30 minutes. The deposited ITO-Glass with Multi-Walled Carbon Nano tubes (MWCNT) will be characterized using Scanning Electron Microscope (SEM), Atomic Force Microscope (AFM), and Raman Microscope. The images of SEM shows that the Multi -Walled Carbon Nano tubes (MWCNT) were distributed uniformly onto the surface of ITO-Glass. The deposited ITO-Glass with Multi-Walled Carbon Nano tubes (MWCNT) could be the potential material in various practical applications such as field emission devices, fuel cells, and super capacitors. Electrophoretic deposition (EPD) technique was found to be an efficient technique in forming well distribution of Multi-Walled Carbon Nano tubes (MWCNT) onto ITO-Glass substrates, as proved in characterization methods, in which the optimum conditions will play the major role. (author)

Localization of gastrointestinal deposition of mercuric chloride studied in vivo

International Nuclear Information System (INIS)

Nielsen, J.B.; Andersen, H.L.; Soerensen, J.A.; Andersen, O.

1992-01-01

During the last 5 years, the site of gastrointestinal absorption of inorganic mercury has been attempted identified mainly by experiments using perfused intestinal segments in vitro or in situ. The present investigation will discuss the localization of the absorption site for mercuric chloride based on a completely undisturbed in vivo experimental model in mice. As the mice were allowed to eat their normal diet during the experimental period, the present results would independently add to existing knowledge on intestinal absorption sites for inorganic mercury. The mice were given 203 Hg labelled mercuric chloride orally, either through stomach tube or in the drinking water, and were killed after various time intervals. Mercury was localized and quantified in various segments of the gastrointestinal tract by gamma-counting. Time course analysis of the segmental deposition of mercury demonstrated that the deposition mainly takes place in the proximal jejunum and suggested that a larger part of the jejunum than previously reported is involved in absorption of mercury. Using this in vivo model, tetraethylthiuram disulfide was demonstrated to increase the intestinal deposition and absorption without changing the site of deposition. (au)

Hydrogen plasma treatment of silicon dioxide for improved silane deposition.

Science.gov (United States)

Gupta, Vipul; Madaan, Nitesh; Jensen, David S; Kunzler, Shawn C; Linford, Matthew R

2013-03-19

We describe a method for plasma cleaning silicon surfaces in a commercial tool that removes adventitious organic contamination and enhances silane deposition. As shown by wetting, ellipsometry, and XPS, hydrogen, oxygen, and argon plasmas effectively clean Si/SiO2 surfaces. However, only hydrogen plasmas appear to enhance subsequent low-pressure chemical vapor deposition of silanes. Chemical differences between the surfaces were confirmed via (i) deposition of two different silanes: octyldimethylmethoxysilane and butyldimethylmethoxysilane, as evidenced by spectroscopic ellipsometry and wetting, and (ii) a principal components analysis (PCA) of TOF-SIMS data taken from the different plasma-treated surfaces. AFM shows no increase in surface roughness after H2 or O2 plasma treatment of Si/SiO2. The effects of surface treatment with H2/O2 plasmas in different gas ratios, which should allow greater control of surface chemistry, and the duration of the H2 plasma (complete surface treatment appeared to take place quickly) are also presented. We believe that this work is significant because of the importance of silanes as surface functionalization reagents, and in particular because of the increasing importance of gas phase silane deposition.

Some methodical questions of study of vertical geochemical zoning of ore deposits

International Nuclear Information System (INIS)

Sochevanov, N.N.; Gorelova, E.K.

1975-01-01

Taking a hydrothermal uranium deposit as an example, the advisability of dividing ore-localizing structures (for the purpose of making a calculation for a single geochemical zonality) into five zones, a supra-, an upper, a central, a lower and an infra-ore one, has been shown. It is recommended to determine the place of elements in the geochemical zonality sequence by taking into account the productivity of their aureoles and the location of the centre of gravity of their reserves in the ore, supra- and infra-ore horizons. When considering the peculiarities of a zonality, it is irrational to take account of elements determined with an insufficient sensitivity as well as of low-contrast or unstable ones. When calculating tracer ratios the most contrasting data can be obtained by using the most distant elements in the geochemical zonality sequence

From sense of place to visualization of place: examining people-place relationships for insight on developing geovisualizations.

Science.gov (United States)

Newell, Robert; Canessa, Rosaline

2018-02-01

Effective resource planning incorporates people-place relationships, allowing these efforts to be inclusive of the different local beliefs, interests, activities and needs. 'Geovisualizations' can serve as potentially powerful tools for facilitating 'place-conscious' resource planning, as they can be developed with high degrees of realism and accuracy, allowing people to recognize and relate to them as 'real places'. However, little research has been done on this potential, and the place-based applications of these visual tools are poorly understood. This study takes steps toward addressing this gap by exploring the relationship between sense of place and 'visualization of place'. Residents of the Capital Regional District of BC, Canada, were surveyed about their relationship with local coastal places, concerns for the coast, and how they mentally visualize these places. Factor analysis identified four sense of place dimensions - nature protection values, community and economic well-being values, place identity and place dependence, and four coastal concerns dimensions - ecological, private opportunities, public space and boating impacts. Visualization data were coded and treated as dependent variables in a series of logistic regressions that used sense of place and coastal concerns dimensions as predictors. Results indicated that different aspects of sense of place and (to a lesser degree) concerns for places influence the types of elements people include in their mental visualization of place. In addition, sense of place influenced the position and perspective people assume in these visualizations. These findings suggest that key visual elements and perspectives speak to different place relationships, which has implications for developing and using geovisualizations in terms of what elements should be included in tools and (if appropriate) depicted as affected by potential management or development scenarios.

Chemistry and melting characteristics of fireside deposits taken from boiler tubes in waste incinerators

International Nuclear Information System (INIS)

Otsuka, Nobuo

2011-01-01

Highlights: → We examine tube deposits taken from boilers of municipal solid waste incinerators. → Literature survey is done on the corrosion mechanism of tube steels. → Chemical analyses, X-ray diffraction, DSC, and corrosion test were conducted. → Melting behavior of salt constituents affected the corrosiveness of the deposits. - Abstract: Twenty-three tube deposits taken from seven heat-recovery boilers of municipal solid waste incinerators were examined by chemical analyses and X-ray diffraction. These deposits were measured by Differential Scanning Calorimeter (DSC) in N 2 to investigate their melting characteristics. Sixteen deposits were used to evaluate their corrosiveness to carbon steel by high-temperature corrosion test conducted at 400 o C for 20 h in 1500 ppm HCl - 300 ppm SO 2 - 7.5%O 2 - 7.5%CO 2 - 20%H 2 O - N 2 . Total heat of endothermic reactions of the deposits taking place between 200 and 400 o C can be related to the corrosion rate of carbon steel at 400 o C. Corrosion initiated at temperatures when the deposits started to melt, became severe when fused salt constituents increased, and alleviated when the majority of the deposits became fused. The corrosion can be interpreted as fused salt corrosion caused by chloride and sulfate salts.

A study of the performance of a reclamation soil cover placed over an oilsands coke deposit

Energy Technology Data Exchange (ETDEWEB)

Fenske, D.S.; Barbour, S.L. [Saskatchewan Univ., Saskatoon, SK (Canada). Dept. of Civil Engineering; Qualizza, C. [Syncrude Canada Ltd., Fort McMurray, AB (Canada)

2006-07-01

Coke is a solid, carbonaceous residue that forms during the cracking of high-boiling point distillates and is one of the by-products of petroleum extraction from oilsands. Coke is known as a possible future energy source and therefore, must be stored within the reclaimed landscape in a form that allows it to be recovered. In addition, it also could be used as a low-density capping material over soft tailings. This paper presented the results of a study that examined the effects of coke in the environment. The study involved construction of two small instrumented watersheds at Syncrude Canada's Mildred Lake Settling Basin. Preliminary field data, highlighting the moisture dynamics within the covers and the underlying coke were discussed. Sand tailings underlie the hydraulically placed coke deposit. Overlying the coke were two different reclamation soil covers constructed of a peat/mineral mix over glacial or glacial lacustrine soils. Placing the finer textured soil cover over coarser grained coke produced a textural or capillary break which enhanced moisture storage for plant use while minimizing deep percolation of infiltrating water. The site has been instrumented with a meteorological station; automated soil stations to monitor suction, water content and temperature through the cover profile; lysimeters to collect net percolation; access tubes for water content monitoring; gas sampling points at depth in the coke; and standpipe piezometers to monitor water chemistry and total head in the coke at depth. 10 refs., 2 tabs., 16 figs.

Geochemistry of trace elements and REE in phosphate deposits of el Sibaiya west AREA, nile valley

International Nuclear Information System (INIS)

Aly, M.M.; Hussein, H.A.; Elkammar, A.A.; Mahdy, A.I.

1994-01-01

The present work deals essentially with the study of the geochemistry of trace elements and rare earth elements (REE s) patterns in the upper cretaceous phosphate deposit in El Sibaiya west area located on the western side of the River Nile. About 20 Km south from Esna town, upper Egypt. It was evident throughout this study that the average shale normalized pattern of six analyzed rare earth elements indicates that the phosphate deposits under study were deposited under marine environment. In addition some geochemical ratios such as Cl/Br and Na/Br have been proposed as indicators of the paleosalinity of the upper cretaceous tethys compared with the nowadays sea. Uranium equilibrium status of the studied phosphate deposits suggests a remarkably secondary enrichment at the lower horizon at the expense of the upper one due to downward leaching. Such secondary enrichment of uranium is thought to take place under oxidizing vadose conditions by the action of descending meteoric water. 6 fig., 4 tab

Mineral deposits of Central America, with a section on manganese deposits of Panama

Science.gov (United States)

Roberts, Ralph Jackson; Irving, Earl Montgomery; Simons, F.S.

1957-01-01

The mineral deposits of Central America were studied between 1942 and 1945, in cooperation with the United States Department of State and the Foreign Economic Administration. Emphasis was originally placed on the study of strategic-mineral deposits, especially of antimony, chromite, manganese, quartz, and mica, but deposits of other minerals that offered promise of significant future production were also studied. A brief appraisal of the base-metal deposits was made, and deposits of iron ore in Honduras and of lead and zinc ores in Guatemala were mapped. In addition, studies were made of the regional geology of some areas, data were collected from many sources, and a new map of the geology of Central America was compiled.

Factors determining properties of multi-walled carbon nanotubes/fibres deposited by PECVD

International Nuclear Information System (INIS)

Bell, M S; Teo, K B K; Milne, W I

2007-01-01

This paper presents a number of factors which have been found to be important to the growth of carbon nanotubes and nanofibres by plasma enhanced chemical vapour deposition. The effect of the electric field in a plasma discharge on nanotube growth is investigated and shown to be important in achieving nanotube alignment. The use of a plasma discharge also enables deposition to take place at lower temperatures, facilitating the use of substrates which would otherwise be damaged. The effect of varying the ratio of carbon feedstock gas to etchant gas is investigated and the ratio is shown to be important for controlling the shape of deposited nanostructures. The effects of varying plasma power are investigated, showing that greater plasma power results in a lower growth rate. Higher levels of plasma power are also shown to cause the sidewalls of deposited carbon nanotubes to be etched. Finally, the growth rate of carbon nanotubes and nanofibres is shown to depend upon the strength of the local electric field. It is proposed that a higher field causes greater ionization within the plasma, which results in a higher growth rate. This is borne out by comparing simulation results with experimental observations

Functionalized porphyrin conjugate thin films deposited by matrix assisted pulsed laser evaporation

Energy Technology Data Exchange (ETDEWEB)

Iordache, S. [University of Bucharest, 3Nano-SAE Research Center, PO Box MG-38, Bucharest-Magurele (Romania); Cristescu, R., E-mail: rodica.cristescu@inflpr.ro [National Institute for Lasers, Plasma and Radiation Physics, Lasers Department, P.O. Box MG-36, Bucharest-Magurele (Romania); Popescu, A.C.; Popescu, C.E.; Dorcioman, G.; Mihailescu, I.N. [National Institute for Lasers, Plasma and Radiation Physics, Lasers Department, P.O. Box MG-36, Bucharest-Magurele (Romania); Ciucu, A.A. [University of Bucharest, Faculty of Chemistry, Bucharest (Romania); Balan, A.; Stamatin, I. [University of Bucharest, 3Nano-SAE Research Center, PO Box MG-38, Bucharest-Magurele (Romania); Fagadar-Cosma, E. [Institute of Chemistry Timisoara of Romanian Academy, M. Viteazul Ave. 24, 300223-Timisoara (Romania); Chrisey, D.B. [Tulane University, Departments of Physics and Biomedical Engineering, New Orleans, LA 70118 (United States)

2013-08-01

We report on the deposition of nanostructured porphyrin-base, 5(4-carboxyphenyl)-10,15,20-tris(4-phenoxyphenyl)-porphyrin thin films by matrix assisted pulsed laser evaporation onto silicon substrates with screen-printed electrodes. AFM investigations have shown that at 400 mJ/cm{sup 2} fluence a topographical transition takes place from the platelet-like stacking porphyrin-based nanostructures in a perpendicular arrangement to a quasi-parallel one both relative to the substrate surface. Raman spectroscopy has shown that the chemical structure of the deposited thin films is preserved for fluences within the range of 200–300 mJ/cm{sup 2}. Cyclic voltammograms have demonstrated that the free porphyrin is appropriate as a single mediator for glucose in a specific case of screen-printed electrodes, suggesting potential for designing a new class of biosensors.

Spontaneous nano-clustering of ZrO2 in atomic layer deposited LayZr1-yOx thin films: Part 1 - Material characterization

NARCIS (Netherlands)

Klootwijk, J.H.; Jinesh, K.B.; Wolters, R.A.M.; Roozeboom, F.; Besling, W.

2008-01-01

During atomic layer deposition (ALD) of uniform LayZr1-yOx thin films, spontaneous segregation of ZrO2 nanocrystals takes place that are embedded in an amorphous La2O3 matrix. This occurs if the Zr content in the LayZr1-yOx film is above 30% i.e. if the pulse ratio between the lanthanum precursor

Diffusive deposition of aerosols in Phebus containment during FPT-2 test

International Nuclear Information System (INIS)

Kontautas, A.; Urbonavicius, E.

2012-01-01

At present the lumped-parameter codes is the main tool to investigate the complex response of the containment of Nuclear Power Plant in case of an accident. Continuous development and validation of the codes is required to perform realistic investigation of the processes that determine the possible source term of radioactive products to the environment. Validation of the codes is based on the comparison of the calculated results with the measurements performed in experimental facilities. The most extensive experimental program to investigate fission product release from the molten fuel, transport through the cooling circuit and deposition in the containment is performed in PHEBUS test facility. Test FPT-2 performed in this facility is considered for analysis of processes taking place in containment. Earlier performed investigations using COCOSYS code showed that the code could be successfully used for analysis of thermal-hydraulic processes and deposition of aerosols, but there was also noticed that diffusive deposition on the vertical walls does not fit well with the measured results. In the CPA module of ASTEC code there is implemented different model for diffusive deposition, therefore the PHEBUS containment model was transferred from COCOSYS code to ASTEC-CPA to investigate the influence of the diffusive deposition modelling. Analysis was performed using PHEBUS containment model of 16 nodes. The calculated thermal-hydraulic parameters are in good agreement with measured results, which gives basis for realistic simulation of aerosol transport and deposition processes. Performed investigations showed that diffusive deposition model has influence on the aerosol deposition distribution on different surfaces in the test facility. (authors)

Advice from Rural Elders: What It Takes to Age in Place

Science.gov (United States)

Dye, Cheryl J.; Willoughby, Deborah F.; Battisto, Dina G.

2011-01-01

Older adults prefer to age in place (AIP), and there are psychological, physiological, and economic benefits in doing so. However, it is especially challenging to AIP in rural communities. AIP models have been tested in urban settings and age-segregated communities, but they are not appropriate for rural communities. This paper presents rural AIP…

Taking climate to the market

International Nuclear Information System (INIS)

Boyle, S.

1998-01-01

Since the 1997 Kyoto Protocol set binding targets for greenhouse gas reductions, there has been a rapid increase in interest in emissions trading. This is based on the premise that reduction options may be cheaper in countries such as those of eastern Europe and the developing world, than in others such as the USA and Norway. As long as real emission reductions take place, and given that climate change is a global problem, setting up an emissions trading market should provide a much cheaper option than reductions applied solely at a national level. The real prospects for a viable market, what it will look like, and the deals already taking place are examined. (UK)

Methodological spot of establishing silt deposit concentration in Serbian rivers

Directory of Open Access Journals (Sweden)

Dragićević Slavoljub

2007-01-01

Full Text Available Recent methodology of sampling and establishing silt deposit concentration in Serbian rivers is associated to numerous deficiencies. Daily concentrations of this type of river deposit on the most of the hydrological gauges were obtained on the base of only one measurement, which takes into consideration the matter of representative ness of those samples. Taking the samples of deposit in one point on the profile is little bit problematic because of dispersion of the obtained results. Very important matter is the question of choice of the sampling location. This analyses of data may lead to serious spots in calculating total carried deposit. From the above mentioned reasons, we decided to take precise measurements of silt deposit concentration as well as to establish methodological spots of measurements. The results of these measurements are analyzed and presented in this paper.

Effects of Preprocessing on Multi-Direction Properties of Aluminum Alloy Cold-Spray Deposits

Science.gov (United States)

Rokni, M. R.; Nardi, A. T.; Champagne, V. K.; Nutt, S. R.

2018-05-01

The effects of powder preprocessing (degassing at 400 °C for 6 h) on microstructure and mechanical properties of 5056 aluminum deposits produced by high-pressure cold spray were investigated. To investigate directionality of the mechanical properties, microtensile coupons were excised from different directions of the deposit, i.e., longitudinal, short transverse, long transverse, and diagonal and then tested. The results were compared to properties of wrought 5056 and the coating deposited with as-received 5056 Al powder and correlated with the observed microstructures. Preprocessing softened the particles and eliminated the pores within them, resulting in more extensive and uniform deformation upon impact with the substrate and with underlying deposited material. Microstructural characterization and finite element simulation indicated that upon particle impact, the peripheral regions experienced more extensive deformation and higher temperatures than the central contact zone. This led to more recrystallization and stronger bonding at peripheral regions relative to the contact zone area and yielded superior properties in the longitudinal direction compared with the short transverse direction. Fractography revealed that crack propagation takes place along the particle-particle interfaces in the transverse directions (caused by insufficient bonding and recrystallization), whereas through the deposited particles, fracture is dominant in the longitudinal direction.

Planned place of birth

DEFF Research Database (Denmark)

Overgaard, Charlotte; Coxon, Kirstie; Stewart, Mary

Title Planned place of birth: issues of choice, access and equity. Outline In Northern European countries, giving birth is generally safe for healthy women with uncomplicated pregnancies, and their babies. However, place of birth can affect women’s outcomes and experiences of birth. Whilst tertiary...... countries, maternity care is provided free to women, through public financing of health care; universal access to care is therefore secured. Nevertheless, different models of care exist, and debates about the appropriateness of providing maternity care in different settings take place in both countries...... in Denmark Coxon K et al: Planned place of birth in England: perceptions of accessing obstetric units, midwife led units and home birth amongst women and their partners. How these papers interrelate These papers draw upon recent research in maternity care, undertaken in Denmark and in England. In both...

Deposition of a-SiC:H using organosilanes in an argon/hydrogen plasma

International Nuclear Information System (INIS)

Maya, L.

1993-01-01

Selected organosilanes were examined as precursors for the deposition of amorphous hydrogenated silicon carbide in an argon/hydrogen plasma. Effect of process variables on the quality of the films was established by means of FTIR, Auger spectroscopy, XPS, XRD, chemical analysis, and weight losses upon pyrolysis. For a given power level there is a limiting feeding rate of the precursor under which operation of the system is dominated by thermodynamics and leads to high quality silicon carbide films that are nearly stoichiometric and low in hydrogen. Beyond that limit, carbosilane polymer formation and excessive hydrogen incorporation takes place. The hydrogen content of the plasma affects the deposition rate and the hydrogen content of the film. In the thermodynamically dominated regime the nature of the precursor has no effect on the quality of the film, it affects only the relative utilization efficiency

Place branding, embeddedness and endogenous rural development

NARCIS (Netherlands)

Donner, Mechthild; Horlings, Lummina; Fort, Fatiha; Vellema, Sietze

2017-01-01

This article deals with place branding on the regional scale, in the rural context of food and tourism networks in Europe. Place branding is linked to the concepts of endogenous rural development, territory and embeddedness, by analysing how the valorisation of specific rural assets takes shape.

Chemical vapour deposition of vanadium oxide thermochromic thin films

Science.gov (United States)

Piccirillo, Clara

Thermochromic materials change optical properties, such as transmittance or reflectance, with a variation in temperature. An ideal intelligent (smart) material will allow solar radiation in through a window in cold conditions, but reflect that radiation in warmer conditions. The variation in the properties is often associated with a phase change, which takes place at a definite temperature, and is normally reversible. Such materials are usually applied to window glass as thin films. This thesis presents the work on the development of thermochromic vanadium (IV) oxide (VO2) thin films - both undoped and doped with tungsten, niobium and gold nanoparticles - which could be employed as solar control coatings. The films were deposited using Chemical Vapour Deposition (CVD), using improved Atmospheric Pressure (APCVD), novel Aerosol Assisted (AACVD) and novel hybrid AP/AACVD techniques. The effects of dopants on the metalto- semiconductor transition temperature and transmittance/reflectance characteristics were also investigated. This work significantly increased the understanding of the mechanisms behind thermochromic behaviour, and resulted in thermochromic materials based on VO2 with greatly improved properties.

Modeling and simulation of NiO dissolution and Ni deposition in molten carbonate fuel cells

Energy Technology Data Exchange (ETDEWEB)

Nam, Suk Woo; Choi, Hyung-Joon; Lim, Tae Hoon [Korea Institute of Science & Technology, Seoul (Korea, Republic of)] [and others

1996-12-31

Dissolution of NiO cathode into the electrolyte matrix is an important phenomena limiting the lifetime of molten carbonate fuel cell (MCFC). The dissolved nickel diffuses into the matrix and is reduced by dissolved hydrogen leading to the formation of metallic nickel films in the pores of the matrix. The growth of Ni films in the electrolyte matrix during the continuous cell operation results eventually in shorting between cathode and anode. Various mathematical and empirical models have been developed to describe the NiO dissolution and Ni deposition processes, and these models have some success in estimating the lifetime of MCFC by correlating the amount of Ni deposited in the matrix with shorting time. Since the exact mechanism of Ni deposition was not well understood, deposition reaction was assumed to be very fast in most of the models and the Ni deposition region was limited around a point in the matrix. In fact, formation of Ni films takes place in a rather broad region in the matrix, the location and thickness of the film depending on operating conditions as well as matrix properties. In this study, we assumed simple reaction kinetics for Ni deposition and developed a mathematical model to get the distribution of nickel in the matrix.

Use of genetic algorithm to identify thermophysical properties of deposited fouling in heat exchanger tubes

International Nuclear Information System (INIS)

Adili, Ali; Ben Salah, Mohieddine; Kerkeni, Chekib; Ben Nasrallah, Sassi

2009-01-01

At high temperature, the circulation of fluid in heat exchangers provides a tendency for fouling accumulation to take place on the internal surface of tubes. This paper shows an experimental process of thermophysical properties estimation of the fouling deposited on internal surface of a heat exchanger tube using genetic algorithms (GAs). The genetic algorithm is used to minimize an objective function containing calculated and measured temperatures. The experimental bench using a photothermal method with a finite width pulse heat excitation is used and the estimated parameters are obtained with high accuracy

DETERMINING THE FEATURES OF SPORTSWEAR TAKING PLACE IN FAST FASHION COLLECTIONS

OpenAIRE

ÇİLEROĞLU, Birsen; KIVILCIMLAR, İnci

2015-01-01

Sports occupies the first place among most siginificant factors increasing quality of life. It has become difficult to allocate proper time for sports in the course of heavy work pace and flow of life. Such circumstances have led people to increase minor sport activities which could be done during short times allocated from daily living, thus, orienting people’s clothing preference towards sportswear. The feeling of easiness and comfort sportswear offer to individuals enhances further such pr...

Atmospheric heavy metal deposition in the Copenhagen area

Energy Technology Data Exchange (ETDEWEB)

Andersen, A; Hovmand, M F; Johnsen, I

1978-10-01

Transport of heavy metals from the atmosphere to the soil and vegetation takes place by dust fall, bulk precipitation, and gas/aerosol adsorption processes. Atmospheric dry and wet deposition of the heavy metals lead, zinc, nickel, vanadium, iron, and copper over the Copenhagen area was measured by sampling in plastic funnels from 17 stations throughout the area for 12 months. Epigeic bryophytes, epiphytic lichen, and topsoil samples were analyzed. A linear correlation between bulk precipitation and heavy metal concentration in lichens and bryophytes was found. An exponential correlation between bulk precipitation and heavy metal concentration in soil was noted. Regional variation of the heavy metal levels in the Copenhagen area was described, and three sub-areas with high metal burdens were distinguished. (10 diagrams, 8 graphs, 13 references, 2 tables)

Nanoscale Soldering of Positioned Carbon Nanotubes using Highly Conductive Electron Beam Induced Gold Deposition

DEFF Research Database (Denmark)

Madsen, Dorte Nørgaard; Mølhave, Kristian; Mateiu, Ramona Valentina

2003-01-01

We have developed an in-situ method for controlled positioning of carbon nanotubes followed by highly conductive contacting of the nanotubes, using electron beam assisted deposition of gold. The positioning and soldering process takes place inside an Environmental Scanning Electron Microscope (E...... in a carbon matrix. Nanoscale soldering of multi-walled carbon nanotubes (MWNT) onto microelectrodes was achieved by deposition of a conducting gold line across a contact point between nanotube and electrode. The solderings were found to be mechanically stronger than the carbon nanotubes. We have positioned...... MWNTs to bridge the gap between two electrodes, and formed soldering bonds between the tube and each of the electrodes. All nanotube bridges showed ohmic resistances in the range 10-30 kΩ. We observed no increase in resistance after exposing the MWNT bridge to air for days....

Enacting a Place-Responsive Research Methodology: Walking Interviews with Educators

Science.gov (United States)

Lynch, Jonathan; Mannion, Greg

2016-01-01

Place-based and place-responsive approaches to outdoor learning and education are developing in many countries but there is dearth of theoretically-supported methodologies to take a more explicit account of place in research in these areas. In response, this article outlines one theoretical framing for place-responsive methodologies for…

Using Critical Path Analysis (CPA) in Place Marketing process

OpenAIRE

Metaxas, Theodore; Deffner, Alex

2013-01-01

The article awards the use of CPA as a methodological tool in Place Marketing implementation. Taking into account that Place Marketing is a strategic process based on ‘project’ meaning with particular actions in specific time horizon, the article proposed that CPΑ has the capacity to satisfy this hypothesis. For this reason, the article creates a hypothetical scenario of CPA in four phases, planning, programming, implementation and feedback, taking as a case study the city of Rostock in Germa...

Vapor deposition of tantalum and tantalum compounds

International Nuclear Information System (INIS)

Trkula, M.

1996-01-01

Tantalum, and many of its compounds, can be deposited as coatings with techniques ranging from pure, thermal chemical vapor deposition to pure physical vapor deposition. This review concentrates on chemical vapor deposition techniques. The paper takes a historical approach. The authors review classical, metal halide-based techniques and current techniques for tantalum chemical vapor deposition. The advantages and limitations of the techniques will be compared. The need for new lower temperature processes and hence new precursor chemicals will be examined and explained. In the last section, they add some speculation as to possible new, low-temperature precursors for tantalum chemical vapor deposition

Key European Grid event to take place in Geneva

CERN Multimedia

2006-01-01

EGEE'06 is the main conference of the EGEE project, which is co-funded by the European Union and hosted by CERN. More than 90 partners all over Europe and beyond are working together in EGEE to provide researchers in both academia and industry with access to major computing resources, independent of their geographic location. The largest user community of the EGEE Grid is the High-Energy Physics community and in particular the LHC experiments, which are already making heavy use of the infrastructure to prepare for data taking. However, with the many new challenges faced by EGEE in its second phase that started in April this year, an even broader audience than at previous EGEE conferences is expected. In particular, a large number of related Grid projects will feature prominently in both plenary and parallel sessions during the 5 days of this event. Industry will also be well represented, highlighting the EGEE project's commitment to technology transfer to industry. CERN is the host of the conference, which i...

The influence of Fe2+ concentration and deposition time on the corrosion resistance of the electrodeposited zinc–nickel–iron alloys

Directory of Open Access Journals (Sweden)

M.M. Abou-Krisha

2016-11-01

Full Text Available Electrodeposition operating conditions for Zn–Ni–Fe alloys from sulfate baths and the corrosion resistance of the electrodeposited alloys were studied. The comparison between Zn–Ni and Zn–Ni–Fe alloys co-deposition revealed that the remarkable inhibition of Ni and Fe deposition takes place due to the presence of Zn2+ in the plating bath. The electrodeposition was performed on the steel substrate, under galvanostatic conditions, for varying Fe2+ bath concentrations and at different times. X-ray diffraction studies of the deposit showed the presence of Fe3Ni2 phase and γ-phase with a composition of Ni2Zn11. The obtained data also exposed that the corrosion resistance increases as a result of increasing Fe2+ concentration and deposition time. Investigation was carried out using cyclic voltammetry and galvastatic techniques for electrodeposition, while linear polarization resistance and anodic linear sweeping voltammetry techniques were used for corrosion study.

Experiencing the enchantment of place and mobility

DEFF Research Database (Denmark)

Bærenholdt, Jørgen Ole

2016-01-01

in several layers of reality. To better understand experiences taking place in intersections between realities, J.R.R. Tolkien’s concept of how real enchantment produces a Secondary World suggests that we see fantasy as real, and this proposition is compared to Georg Simmel’s more modernist suggestion......Experiences of place and mobility play central roles not only in what was traditionally understood as tourism, but also in the broader practices of travelling and visiting sites and sights. On the one hand, such experiences are performed to an extent where it is difficult to isolate the sites...... and movements experienced per se, since visitors and travellers take part in ‘doing’ places and mobility. On the other, experience sites and routes stand out with specific traces and characteristics affording some – and not other – experiences. This paper discusses conceptual understandings that may help...

ENVIRONMENT PROTECTION THROUGH DETECTION OF HOT SPOTS USING THERMOGRAPHY IN COAL DEPOSITS BEFORE SELF IGNITION

Directory of Open Access Journals (Sweden)

Alina DINCĂ

2009-12-01

Full Text Available In this paper is presented a way to contribute to the environmental protection when it comes to coal which waits in big deposits to be burned for energy production. Because of certain parameters, in some places, the deposited coal could overheat and self ignite, thus loosing its caloric properties and even lead to fire. In this case the losses could be even higher, and the effect on the environment even worse. In order to prevent this self ignition to happen, an infrared camera can be mounted on a system, and the camera together with software which interprets the thermographic images, can alarm the personnel who is in charge with coal surveillance that the coal will ignite unless they take immediate measures. Also, there will be presented the limits we have found by now in the way of finalizing the application.

Hyper-local, directions-based ranking of places

DEFF Research Database (Denmark)

Venetis, Petros; Gonzalez, Hector; Jensen, Christian S.

2011-01-01

they are numerous and contain precise locations. Specifically, the paper proposes a framework that takes a user location and a collection of near-by places as arguments, producing a ranking of the places. The framework enables a range of aspects of directions queries to be exploited for the ranking of places......, including the frequency with which places have been referred to in directions queries. Next, the paper proposes an algorithm and accompanying data structures capable of ranking places in response to hyper-local web queries. Finally, an empirical study with very large directions query logs offers insight...... into the potential of directions queries for the ranking of places and suggests that the proposed algorithm is suitable for use in real web search engines....

Application potential of sequence stratigraphy to prospecting for sandstone-type uranium deposit in continental depositional basins

International Nuclear Information System (INIS)

Li Shengxiang; Chen Zhaobo; Chen Zuyi; Xiang Weidong; Cai Yuqi

2001-01-01

Sequence stratigraphy has been widely used in hydrocarbon exploration and development, and great achievements have been achieved. However, its application to the prospecting for sandstone-type uranium deposits is just beginning. The metallogenic characteristics of sandstone-type uranium deposits and those of oil and gas are compared, and the relationship between sandstone-type uranium metallogenesis and the system tracts of sequence stratigraphy is studied. The authors propose that highest and system tracts are the main targets for prospecting interlayer oxidation zone type sandstone uranium deposits, and the incised valleys of low stand system tracts are favourable places for phreatic oxidation zone type sandstone uranium deposits, and transgressive system tracts are generally unfavorable to the formation of in-situ leachable sandstone-type uranium deposits. Finally, the authors look ahead the application potential of sequence stratigraphy to the prospecting for sandstone-type uranium deposits in continental depositional basins

Beyond stereotypes of adolescent risk taking: Placing the adolescent brain in developmental context

Directory of Open Access Journals (Sweden)

Daniel Romer

2017-10-01

Full Text Available Recent neuroscience models of adolescent brain development attribute the morbidity and mortality of this period to structural and functional imbalances between more fully developed limbic regions that subserve reward and emotion as opposed to those that enable cognitive control. We challenge this interpretation of adolescent development by distinguishing risk-taking that peaks during adolescence (sensation seeking and impulsive action from risk taking that declines monotonically from childhood to adulthood (impulsive choice and other decisions under known risk. Sensation seeking is primarily motivated by exploration of the environment under ambiguous risk contexts, while impulsive action, which is likely to be maladaptive, is more characteristic of a subset of youth with weak control over limbic motivation. Risk taking that declines monotonically from childhood to adulthood occurs primarily under conditions of known risks and reflects increases in executive function as well as aversion to risk based on increases in gist-based reasoning. We propose an alternative Life-span Wisdom Model that highlights the importance of experience gained through exploration during adolescence. We propose, therefore, that brain models that recognize the adaptive roles that cognition and experience play during adolescence provide a more complete and helpful picture of this period of development.

Preparation and characterization of Bi2Sr2CaCu2O8+δ thin films on MgO single crystal substrates by chemical solution deposition

DEFF Research Database (Denmark)

Grivel, Jean-Claude; Kepa, Katarzyna; Hlásek, T.

2013-01-01

Bi2Sr2CaCu2O8 thin films have been deposited on MgO single crystal substrates by spin-coating a solution based on 2-ethylhexanoate precursors. Pyrolysis takes place between 200°C and 450°C and is accompanied by the release of 2-ethylhexanoic acid, CO2 and H2O vapour. Highly c-axis oriented Bi2Sr2Ca...

Deposit Insurance Coverage, Credibility of Non-insurance, and Banking Crises

DEFF Research Database (Denmark)

Angkinand, Apanard; Wihlborg, Clas

2005-01-01

level require analyses of institutional factors affecting the credibility of non-insurance. In particular, the implementation of effective distress resolution procedures for banks would allow governments to reduce explicit deposit insurance coverage and, thereby, to strengthen market discipline......The ambiguity in existing empirical work with respect to effects of deposit insurance schemes on banks' risk-taking can be resolved if it is recognized that absence of deposit insurance is rarely credible and that the credibility of non-insurance can be enhanced by explicit deposit insurance...... schemes. We show that under reasonable conditions for effects on risk-taking of creditor protection in banking, and for effects on credibility of non-insurance of explicit coverage of deposit insurance schemes, there exists a partial level of coverage that maximizes market discipline and minimizes moral...

Deposition and Characterization of CVD-Grown Ge-Sb Thin Film Device for Phase-Change Memory Application

Directory of Open Access Journals (Sweden)

C. C. Huang

2012-01-01

Full Text Available Germanium antimony (Ge-Sb thin films with tuneable compositions have been fabricated on SiO2/Si, borosilicate glass, and quartz glass substrates by chemical vapour deposition (CVD. Deposition takes place at atmospheric pressure using metal chloride precursors at reaction temperatures between 750 and 875°C. The compositions and structures of these thin films have been characterized by micro-Raman, scanning electron microscope (SEM with energy dispersive X-ray analysis (EDX and X-ray diffraction (XRD techniques. A prototype Ge-Sb thin film phase-change memory device has been fabricated and reversible threshold and phase-change switching demonstrated electrically, with a threshold voltage of 2.2–2.5 V. These CVD-grown Ge-Sb films show promise for applications such as phase-change memory and optical, electronic, and plasmonic switching.

Methods of improvement of forecasting of development of mineral deposits' power supply

Directory of Open Access Journals (Sweden)

Alexander V. Putilov

2015-03-01

Full Text Available Mineral deposits (among which non-ferrous metals take a leading place are situated on the territory of our planet rather unevenly, and often in out-of-the-way places. Nuclear power (particularly, transportable nuclear power plants provides the new possibilities of power supply, which is very important for deposits' development. This article shares the economic aspects of forecasting in the field of power development (in particular, nuclear power on the basis of transportable nuclear power plants. Economic barriers of development of innovative nuclear technologies are considered on the example of transportable nuclear power plants. At the same time, there are given the ways of elimination of such barrier to development of this technology as methodical absence of investigation of a question of distribution of added cost between producers of innovative equipment and final product. Addition of new analytical tool (“business diagonal” is offered for a method of definition of economically efficient distribution of added cost (received as a result of introduction of innovative technologies between participants of production and consumption of atomic energy within the “economic cross” model. There is offered the order of use of method of cash flows discounting at calculations between nuclear market participants. Economic methods, offered in this article, may be used in forecasting of development of other energy technologies and introduction of prospective energy equipment.

Brand new authentic places

DEFF Research Database (Denmark)

Stender, Marie

the relation and interplay between the two. This study strives to fill this gap by ethnographically tracing the process from design to occupancy including the role of branding as a means to create authenticity. The concept of authenticity is often associated with old houses and neighbourhoods, but also in new......How are places and material surroundings ascribed with meaning when new residential neighbourhoods are designed, branded and taken into use? Existing research on housing, neighbourhoods and urban design tends to take the perspective of either the architect or the user rather than to explore...... neighbourhoods stories of authenticity seems to be of great importance giving value and identity to place and people. By way of design and branding new places are implied with notions of the real, the original and the unique referring to e.g. its historical past, architectural uniqueness, sustainability or sense...

Particle Tracking and Deposition from CFD Simulations using a Viscoelastic Particle Model

NARCIS (Netherlands)

Losurdo, M.

2009-01-01

In the present dissertation the mathematical modelling of particle deposition is studied and the solution algorithms for particle tracking, deposition and deposit growth are developed. Particle deposition is modelled according to mechanical impact and contact mechanics taking into account the

In-place HEPA filter penetration test

International Nuclear Information System (INIS)

Bergman, W.; Wilson, K.; Elliott, J.; Bettencourt, B.; Slawski, J.W.

1997-01-01

We have demonstrated the feasibility of conducting penetration tests on high efficiency particulate air (HEPA) filters as installed in nuclear ventilation systems. The in-place penetration test, which is designed to yield equivalent penetration measurements as the standard DOP efficiency test, is based on measuring the aerosol penetration of the filter installation as a function of particle size using a portable laser particle counter. This in-place penetration test is compared to the current in-place leak test using light scattering photometers for single HEPA filter installations and for HEPA filter plenums using the shroud method. Test results show the in-place penetration test is more sensitive than the in-place leak test, has a similar operating procedure, but takes longer to conduct. Additional tests are required to confirm that the in-place penetration test yields identical results as the standard dioctyl phthalate (DOP) penetration test for HEPA filters with controlled leaks in the filter and gasket and duct by-pass leaks. Further development of the procedure is also required to reduce the test time before the in- place penetration test is practical

Integration of transcriptome and whole genomic resequencing data to identify key genes affecting swine fat deposition.

Directory of Open Access Journals (Sweden)

Kai Xing

Full Text Available Fat deposition is highly correlated with the growth, meat quality, reproductive performance and immunity of pigs. Fatty acid synthesis takes place mainly in the adipose tissue of pigs; therefore, in this study, a high-throughput massively parallel sequencing approach was used to generate adipose tissue transcriptomes from two groups of Songliao black pigs that had opposite backfat thickness phenotypes. The total number of paired-end reads produced for each sample was in the range of 39.29-49.36 millions. Approximately 188 genes were differentially expressed in adipose tissue and were enriched for metabolic processes, such as fatty acid biosynthesis, lipid synthesis, metabolism of fatty acids, etinol, caffeine and arachidonic acid and immunity. Additionally, many genetic variations were detected between the two groups through pooled whole-genome resequencing. Integration of transcriptome and whole-genome resequencing data revealed important genomic variations among the differentially expressed genes for fat deposition, for example, the lipogenic genes. Further studies are required to investigate the roles of candidate genes in fat deposition to improve pig breeding programs.

Age, genesis and exploration for mineral deposits: the possibilities offered by lead isotopes

International Nuclear Information System (INIS)

Marcoux, E.; Calvez, J.Y.

1985-01-01

After a brief theoretical survey of the subject, the paper discusses the assistance that lead isotopes can bring to solving problems of metallogenesis and mineral exploration. Lead isotopes act as a true geologic clock when radioactive decay of lead takes place in a closed U-Th-Pb system, or when these conditions have been recreated by homogenization of a large crustal segment. The lead clock is thus reliable for deposits whose process of formation was part of a hydrothermal event that affected a significant part of the crust, most importantly in island-arc volcanosedimentary deposits, much less so for deposits formed by spatially restricted hydrothermal activity such as the emplacement of veins. Very interesting possibilities are also to be found in the capacity of lead isotopes to act as geochemical tracers. In conjunction with paragenetic and gitologic studies, determination of the isotopic composition of lead allows the sources of metals to be identified and permits an approach to the understanding of inheritance phenomena in a mineral deposit or province. This information also assists in unravelling the successive metallogenic processes in a region, thus contributing to refinement of the concept of a metallogenic province. Lastly lead isotopes provide an additional factor in assessing the economic potential of a deposit undergoing exploration. The method is based on a comparison of the isotopic signature of the deposit with that of economic mineralization occuring elsewhere in the circa. Examples of stratiform deposits and the gold-bearing veins of Limousin are described. The application of this method to gossans can provide additional information to standard geochemistry and thus assist in grading of targets [fr

Tritium in the underground waters of the Karazheera coal deposit

International Nuclear Information System (INIS)

Panin, M.S.; Artamonova, H.N.

2001-01-01

Full text: The Karazheera coal deposit is the unique geological object due to it's location on the Balapan site of the former Semipalatinsk nuclear polygon (SNP) with its wide range of underground nuclear tests fulfilled here (more than 130 explosions). That is why some radiological problems may appear with the geological ones which take place in the open mining work of the deposit. The radio-active pollution of SNP has been actively discussed in scientific literature for a long time. The present report evaluates the radio-active tritium pollution ( 3 H) of the deposit's underground waters. That very component of nature is subjected to radiation pollution in large extent after underground nuclear tests. 3 H radio-active isotope with 12-13 year period of half-decay. 3 H is generated in the result of nuclear reactions caused by cosmic radiation and nuclear reactions of explosions. The total number of 3 H on the globe comes to 12 kg. The content of 3 H has been studied in underground waters of self-pouring wells number 76, 82, springs and dipholes of the deposit. It has been fixed that concentration of 3 H in the deposit is fluctuating within 0.4-37.9 tritium units (TU) while the average content 10.3 TU (1 TU - 3.2x10 -12 Curie/liter). The analysis of 3 H decay shows that its maximum concenliaiion has been fixed in the deposit 82 (37.9 TU) and in diphole (32.3 TU). The background content of 3 H in water was evaluated on the level of 1-8 TU till 1945. In the result of nuclear weapon tests the background has been considerably increased and according to First data (1994) it is corresponded to 23 TU. The average content of the 3 H in underground waters of Karazheera is half the size of this index (10.3 TU). It comprises 3.3x10 -11 and it is more lower than quota 4x10 -6 Ci/l. It is considered that the content of more than 10 TU in waters is caused by thermal nuclear test. Precipitations fallen after 1961 are presented in subsoil waters containing of 20 TU or more

Particle deposition in low-speed, high-turbulence flows

DEFF Research Database (Denmark)

Reck, Mads; Larsen, Poul Scheel; Ullum, U.

2002-01-01

The experimental and numerical study considers the concentration of airborne particulate contaminants, such as spores of spoilage fungi, and their deposition on a surface, in a petri dish, and on a warm box-shaped product placed in a food-processing environment. Field measurements by standard...... field measurements. Particle deposition is shown to be associated with near-wall coherent structures. Flow reversal, simulated by impulsive start, is shown to give higher deposition rates than steady mean flows. Key word index: Spoilage fungi; spores; food processing plant; deposition flux; large eddy...

Management and communication courses – Places available

CERN Multimedia

2012-01-01

There are places available in some management and communication courses taking place in the period January to March 2013.   For more information on the course, click on the course title, which will bring you to the training catalogue. You can then sign-up on-line. For advice, you can contact: Erwin Mosselmans, tel. 74125, erwin.mosselmans@cern.ch Nathalie Dumeaux, tel. 78144, nathalie.dumeaux@cern.ch Courses in English (or bilingual) Session Duration Language Availability How to get, as a supervisor, the most out of the annual interview 21 January 1 day English 2 places Project Engineering 24 and 25 January 2 days English 6 places How to get, as a supervisor, the most out of the annual interview 31 January 1 day English 6 places Conflict Resolution for Managers 19 and 20 February 2 days English One more place Project Scheduling & Costing 6 and 7 March 2 days English 2 places Communicati...

Energy deposition and the formation of biologically significant lesions by accelerated ions

International Nuclear Information System (INIS)

Kiefer, J.

1985-01-01

The assumption that the number of biologically significant lesions depends only on the amount of of energy absorbed in a critical cellular site is not able to explain the increase of RBE with LET and leads to large discrepancies between predicted and measured inactivation cross sections in the LET range between 20 and 200 keV.μm -1 . It has, therefore, to be concluded that not only the amount of energy absorbed but also the spatial pattern of this deposition plays a decisive role. In the model presented it is postulated that two or more energy deposition events in nanometre sites are required for the formation of biologically significant lesions. This cooperative action has to take place in very short times so that only interactions within a single particle track contribute. The mathematical treatment will be outlined and qualitatively shown that the model is able to predict RBE-LET relationships. The calculations use a track structure model based on classical collision mechanics. It is compared with existing experimental results showing good agreement at least for higher particle energies. (author)

Management and communication courses – Places available

CERN Multimedia

2013-01-01

There are places available in some management and communication courses taking place in the period April to June 2013.   For more information on the course, click on the course title, this will bring you to the training catalogue. You can then sign-up online. For advice, you can contact: - Erwin Mosselmans, tel. 74125, erwin.mosselmans@cern.ch - Nathalie Dumeaux, tel. 78144, nathalie.dumeaux@cern.ch Courses in English (or bilingual) Sessions Duration Language Availability Managing stress 29 and 30 May 2 days English 3 places Making Presentations 30, 31 May & 25 June 3 days English 2 places Communicating Effectively - Residential course 4 to 6 June 3 days Bilingual 9 places Handling difficult conversations (Adapted from Dealing with Conflict) 7 and 14 June and 13 September 3 days English 6 places Voice and Nonverbal Behaviour in Speech Communication 17 and 18 June 1 day 4 hours English 7 plac...

Tackling the take-or-pay problem

International Nuclear Information System (INIS)

Jackson, Kim.

1997-01-01

Centrica, the gas sales, trading and services company previously part of British Gas plc, has renegotiated a number of its take-or-pay contracts with North Sea gas producers since the end of 1996. The contracts - a legacy of the British Gas monopoly era - had placed an increasing financial burden on the company as it was effectively forced to pay above-market prices for gas which it did not always want to take, while trying to remain competitive in a market where an ever growing number of independent gas suppliers were offering low-cost supplies. The author looks at how Centrica has tackled its take-or-pay problem. (author)

In-place HEPA filter penetration test

Energy Technology Data Exchange (ETDEWEB)

Bergman, W.; Wilson, K.; Elliott, J. [Lawrence Livermore National Lab., CA (United States)] [and others

1997-08-01

We have demonstrated the feasibility of conducting penetration tests on high efficiency particulate air (HEPA) filters as installed in nuclear ventilation systems. The in-place penetration test, which is designed to yield equivalent penetration measurements as the standard DOP efficiency test, is based on measuring the aerosol penetration of the filter installation as a function of particle size using a portable laser particle counter. This in-place penetration test is compared to the current in-place leak test using light scattering photometers for single HEPA filter installations and for HEPA filter plenums using the shroud method. Test results show the in-place penetration test is more sensitive than the in-place leak test, has a similar operating procedure, but takes longer to conduct. Additional tests are required to confirm that the in-place penetration test yields identical results as the standard dioctyl phthalate (DOP) penetration test for HEPA filters with controlled leaks in the filter and gasket and duct by-pass leaks. Further development of the procedure is also required to reduce the test time before the in-place penetration test is practical. 14 refs., 14 figs., 3 tabs.

Where and How Do Aging Processes Take Place in Everyday Life? Answers From a New Materialist Perspective

Directory of Open Access Journals (Sweden)

Grit Höppner

2018-04-01

Full Text Available In the last decade, the focus of studies on age and aging has fundamentally changed from biological to symbolic, discursive, and cultural phenomena. Currently, the most studied topic in material gerontology is the materiality of age and aging in the context of everyday life. Scholars in this area have thus been making an important contribution to a material understanding of aging processes. As we understand them, however, both social constructivist and material gerontological concepts reach their limit when it comes to the questions of where and how aging processes actually take place in everyday life. In order to answer these two questions, we review social constructivist ideas with a particular focus on the “doing age” concept and material gerontological assumptions regarding human subjects, their material environments, and their relations. We then suggest rethinking bodily limitations and agencies addressed by scholars in the field of new materialism. The aim is to develop a new materialist-inspired understanding of aging processes that helps to reconstruct the material-discursive co-production of aging processes. These processes are deployed as mutual entanglements of materiality and meaning as well as of humans and non-human agency. This approach emphasizes the decentralization of the human actor and thus helps to map the material-discursive complexity of aging processes as relational co-products of humans and non-humans in everyday life.

Process optimization of atomized melt deposition for the production of dispersion strengthened Al-8.5%Fe-1.2%V-1.7%Si alloys

International Nuclear Information System (INIS)

Hariprasad, S.; Sastry, S.M.L.; Jerina, K.L.

1995-01-01

Atomized melt deposition is a low cost manufacturing process with the microstructural control achieved through rapid solidification. In this process the liquid metal is disintegrated into fine droplets by gas atomization and the droplets are deposited on a substrate producing near net shape products. In the present investigation Al-8.5%Fe-1.2%V-1.7%Si alloy was produced using atomized melt deposition process to study the evolution of microstructure and assess the cooling rates and the undercooling achieved during the process. The size, morphology and the composition of second phase particles in the alloy are strong functions of the cooling rate and the undercooling and hence microstructural changes with the variation in process parameters were quantified. To define optimum conditions for the atomized melt deposition process, a mathematical model was developed. The model determines the temperature distribution of the liquid droplets during gas atomization and during the deposition stages. The model predicts the velocity distribution, cooling rates and the fraction solid, during the flight for different droplet sizes. The solidification heat transfer phenomena taking place during the atomized melt deposition process was analyzed using a finite difference method based on the enthalpy formulation

Nanomanufacturing of titania interfaces with controlled structural and functional properties by supersonic cluster beam deposition

International Nuclear Information System (INIS)

Podestà, Alessandro; Borghi, Francesca; Indrieri, Marco; Bovio, Simone; Piazzoni, Claudio; Milani, Paolo

2015-01-01

Great emphasis is placed on the development of integrated approaches for the synthesis and the characterization of ad hoc nanostructured platforms, to be used as templates with controlled morphology and chemical properties for the investigation of specific phenomena of great relevance in interdisciplinary fields such as biotechnology, medicine, and advanced materials. Here, we discuss the crucial role and the advantages of thin film deposition strategies based on cluster-assembling from supersonic cluster beams. We select cluster-assembled nanostructured titania (ns-TiO 2 ) as a case study to demonstrate that accurate control over morphological parameters can be routinely achieved, and consequently, over several relevant interfacial properties and phenomena, like surface charging in a liquid electrolyte, and proteins and nanoparticles adsorption. In particular, we show that the very good control of nanoscale morphology is obtained by taking advantage of simple scaling laws governing the ballistic deposition regime of low-energy, mass-dispersed clusters with reduced surface mobility

Nanomanufacturing of titania interfaces with controlled structural and functional properties by supersonic cluster beam deposition

Energy Technology Data Exchange (ETDEWEB)

Podestà, Alessandro, E-mail: alessandro.podesta@mi.infn.it, E-mail: pmilani@mi.infn.it; Borghi, Francesca; Indrieri, Marco; Bovio, Simone; Piazzoni, Claudio; Milani, Paolo, E-mail: alessandro.podesta@mi.infn.it, E-mail: pmilani@mi.infn.it [Centro Interdisciplinare Materiali e Interfacce Nanostrutturati (C.I.Ma.I.Na.), Dipartimento di Fisica, Università degli Studi di Milano, via Celoria 16, 20133 Milano (Italy)

2015-12-21

Great emphasis is placed on the development of integrated approaches for the synthesis and the characterization of ad hoc nanostructured platforms, to be used as templates with controlled morphology and chemical properties for the investigation of specific phenomena of great relevance in interdisciplinary fields such as biotechnology, medicine, and advanced materials. Here, we discuss the crucial role and the advantages of thin film deposition strategies based on cluster-assembling from supersonic cluster beams. We select cluster-assembled nanostructured titania (ns-TiO{sub 2}) as a case study to demonstrate that accurate control over morphological parameters can be routinely achieved, and consequently, over several relevant interfacial properties and phenomena, like surface charging in a liquid electrolyte, and proteins and nanoparticles adsorption. In particular, we show that the very good control of nanoscale morphology is obtained by taking advantage of simple scaling laws governing the ballistic deposition regime of low-energy, mass-dispersed clusters with reduced surface mobility.

Nanomanufacturing of titania interfaces with controlled structural and functional properties by supersonic cluster beam deposition

Science.gov (United States)

Podestà, Alessandro; Borghi, Francesca; Indrieri, Marco; Bovio, Simone; Piazzoni, Claudio; Milani, Paolo

2015-12-01

Great emphasis is placed on the development of integrated approaches for the synthesis and the characterization of ad hoc nanostructured platforms, to be used as templates with controlled morphology and chemical properties for the investigation of specific phenomena of great relevance in interdisciplinary fields such as biotechnology, medicine, and advanced materials. Here, we discuss the crucial role and the advantages of thin film deposition strategies based on cluster-assembling from supersonic cluster beams. We select cluster-assembled nanostructured titania (ns-TiO2) as a case study to demonstrate that accurate control over morphological parameters can be routinely achieved, and consequently, over several relevant interfacial properties and phenomena, like surface charging in a liquid electrolyte, and proteins and nanoparticles adsorption. In particular, we show that the very good control of nanoscale morphology is obtained by taking advantage of simple scaling laws governing the ballistic deposition regime of low-energy, mass-dispersed clusters with reduced surface mobility.

Updates to concepts on phreatomagmatic maar-diatremes and their pyroclastic deposits

Science.gov (United States)

Valentine, Greg A.; White, James D. L.; Ross, Pierre-Simon; Graettinger, Alison H.; Sonder, Ingo

2017-08-01

Recent work is changing our understanding of phreatomagmatic maar-diatreme eruptions and resulting deposits. In previous models, explosions were often inferred to take place only at the base of a diatreme, with progressive downward migration due to a cone of depression in the host aquifer. However, diatremes themselves contain much water that is heterogeneously distributed, and field evidence supports the existence of explosion sites at many vertical and lateral locations within them. Crater sizes have been used to estimate explosion energies, but this only works for single-explosion craters where the depth of explosion is independently known, and has limited value for multi-explosion maar-diatremes. Deep-seated lithic clasts in tephra ring beds have been taken to indicate the depth of the explosion that produced that bed. However, only relatively shallow explosions actually vent to the surface, and deep-seated lithics are gradually brought to shallow depths through step-wise mixing of multiple subsurface explosions. Grain-size of tephra-ring deposits is often inferred to indicate fragmentation efficiency. However, other factors strongly influence deposit grain size, including the scaled depth of an explosion and the interaction of an erupting jet with topography around a vent (e.g., crater), along with long recognized effects of mechanical properties of host rocks and recycling within the vent/diatreme. These insights provide a foundation for future research into this important volcano type.

Macrokinetics of carbon nanotubes synthesis by the chemical vapor deposition method

Science.gov (United States)

Rukhov, Artem; Dyachkova, Tatyana; Tugolukov, Evgeny; Besperstova, Galina

2017-11-01

A new approach to studying and developing basic processes which take place on the surface of a metal catalyst during the thermal decomposition of carbonaceous substances in the carbon nanotubes synthesis by the chemical vapor deposition method was proposed. In addition, an analysis was made of the interrelationships between these thermal, diffusion, hydrodynamic and other synthesis processes. A strong effect of the catalyst regeneration stage on the stage of nanotube formation has been shown. Based on the developed approach, a mathematical model was elaborated. Comparison of the calculation and the experiment carried out with the NiO-MgO catalyst at propane flow rate of 50 mL/min (standard conditions) and ethanol flow rate 0.3 mL/min (liq.) has revealed a discrepancy of less than 10%.

Perspective Taking in Workplaces

Directory of Open Access Journals (Sweden)

Zappalà Salvatore

2014-07-01

Full Text Available Workplaces are often described as places in which individuals are motivated by their self-interests and in which negative events like time pressure, anxiety, conflict with co-workers, miscomprehensions, difficulties in solving problems, not-transmitted or not-exchanged information that lead to mistakes, and in some cases to injuries, stress or control, are part of everyday life (Dormann & Zapf, 2002; Schabracq, Winnubst and Cooper, 2003. Such situations are often the result of the limited comprehension of needs, skills, or information available to colleagues, supervisors, subordinates, clients or providers. However, workplaces are also places in which employees take care of clients, support colleagues and subordinates (Rhoades & Eisenberger, 2002, are enthusiastic about their job (Bakker et al., 2008, are motivated by leaders that encourage employees to transcend their own self-interests for the good of the group or the organization and provide them with the confidence to perform beyond expectations (Bass, 1997. Thus positive relationships at work are becoming a new interdisciplinary domain of inquiry (Dutton & Ragins, 2006. Within this positive relationships framework, in this paper we focus on a positive component of workplaces, and particularly on an individual cognitive and emotional process that has an important role in the workplace because it facilitates interpersonal relations and communications: it is the perspective taking process. In order to describe perspective taking, we will refer to some empirical studies and particularly to the review published by Parker, Atkins and Axtell in 2008 on the International Review of Industrial and Organizational Psychology.

Place branding, embeddedness and endogenous rural development : Four European cases

NARCIS (Netherlands)

Donner, Mechthild; Horlings, Lummina; Fort, Fatiha; Vellema, Sietze

2017-01-01

This article deals with place branding on the regional scale, in the rural context of food and tourism networks in Europe. Place branding is linked to the concepts of endogenous rural development, territory and embeddedness, by analysing how the valorisation of specific rural assets takes shape. The

Place branding, embeddedness and endogenous rural development : Four European cases

NARCIS (Netherlands)

Donner, Mechthild; Horlings, Lummina; Fort, Fatiha; Vellema, Sietze

This article deals with place branding on the regional scale, in the rural context of food and tourism networks in Europe. Place branding is linked to the concepts of endogenous rural development, territory and embeddedness, by analysing how the valorisation of specific rural assets takes shape. The

The anthracite of Nazar-Ayloksk deposit

International Nuclear Information System (INIS)

Mirsaidov, U.M.

2002-01-01

In this chapter of book author gives information about anthracites of Nazar-Ayloksk deposit. It was show that heightened and anomalous content of some elements-dirt in these anthracites of deposit create presupposition of using them as complex energy-mineral raw material. In same time at using coal as fuel it is necessary take in to account heightened content such toxic elements as Sb, Hg and As and some others which are ecologically harmful

Settings: In a Variety of Place. . .

Science.gov (United States)

Cairo, Peter; And Others

This document consists of the fourth section of a book of readings on issues related to adult career development. The four chapters in this fourth section focus on settings in which adult career development counseling may take place. "Career Planning and Development in Organizations" (Peter Cairo) discusses several concepts and definitions…

Increasing Recycling through Container Deposit : A Fixed Effects analysis of the Swedish increase in Container Deposit September 2010

OpenAIRE

Thörnelöf, Ivar

2016-01-01

This thesis analyze the impact on recycling from the increase in the deposit on metal cans that took place in Sweden, September 2010. This is done by using a fixed effects model, fixed on municipality, month, and year. Additionally, the thesis investigates the response of different socioeconomic groups to this change by investigating the interaction between deposit and variables for the socioeconomic factors of interest. Interactions for income, education, immigration, environmental awareness...

20 CFR 703.211 - Authority to seize security deposit; use and/or return of proceeds.

Science.gov (United States)

2010-04-01

... acceptable negotiable securities in its place; (3) Fails to renew any deposited negotiable securities at... place; (4) Has State insolvency proceedings initiated against it; or (5) Fails to comply with any of the... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Authority to seize security deposit; use and...

Microbial weathering processes after release of heavy metals and arsenic from fluvial tailing deposits; Mikrobielle Verwitterungsprozesse bei der Freisetzung von Schwermetallen und Arsen aus fluvialen Tailingablagerungen

Energy Technology Data Exchange (ETDEWEB)

Willscher, S. [Technische Univ. Dresden (Germany). Fak. fuer Forst, Geo und Hydrowissenschaften, Inst. fuer Abfallwirtschaft und Altlasten

2006-07-01

Microbial processes play an important role in global metal cycles. The microbial weathering of mineral surfaces, including deposited anthropogenic mineral remainders, is a natural occurring process, taking place on uncovered dump surfaces as well as in deeper zones of dumps. Such weathering processes also occur in metal contaminated soils and sediments. In this work, a sulfidic fluvial tailing sediment was investigated for its acidity and salinity generating potential and the subsequent mobilisation of heavy metals, generated by biogeochemical processes. The long-term risks of such a deposit were evaluated. Unstabilised deposits of such materials can generate a considerable contamination of the surrounding ground and surface water. It could be shown in the experiments that in acid generating dumps and tailing materials besides the well known acidophilic autotrophs also acidotolerant heterotrophic microorganisms play a role in the mobilisation of metals. (orig.)

Bottom current deposition in the Antarctic Wilkes Land margin during the Oligocene

Science.gov (United States)

Salabarnada, Ariadna; Escutia, Carlota; Nelson, Hans C.; Evangelinos, Dimitris; López-Quirós, Adrián

2017-04-01

Sediment cores collected from the Antarctic Wilkes Land continental rise at IODP site 1356 provide evidence for bottom current sedimentation taking place since the early Oligocene (i.e., 33.6 Ma) (Escutia et al., 2011). Correlation between site 1356 sediments and the regional grid of multichannel seismic reflection profiles, complemented with bathymetric data, allow us to differentiate a variety of contourite deposits resulting from the interaction between bottom currents and seafloor paleomorphologies. Contourite deposits are identified based on the seismic signature, reflector configuration and geometry of the depositional bodies as elongated-mounded drifts, giant mounded drifts, confined drifts, infill drifts, plastered drifts, sediment waves, and moats. Based on the spatial and temporal distribution of these deposits, we differentiate three phases in contourite deposition in this margin: Phase 1) from 33.6-28 Ma sheeted drift morphologies dominate, related to high-energy deposits associated with fast flowing currents during the early Oligocene; Phase 2) At around 28 Ma, mounded drift morphologies and moat channels start forming. Continued intensification of contour currents results in larger contourite morphologies such as giant mounded drifts and moats forming around structural heights present in the Wilkes Land basin (e.g, the Adelie Rift Block). Phase 3) A shift in current configuration is recorded at around 15 Ma above regional unconformity WL-U5, which marks the Oligocene-Miocene Transition. This change is shown by a migration to the North of the drift crests and by a dominance of down-slope sedimentation processes that is indicated by mass transport deposits and channel levee formation. We interpret the evolution of the contourite deposits during the Oligocene in this margin to be driven by changes in the intensity of bottom current activity over time resulting from ice sheet growth, evolution of bottom morphology and related changes in paleoceanographic

41 CFR 60-30.11 - Depositions upon oral examination.

Science.gov (United States)

2010-07-01

... examination. 60-30.11 Section 60-30.11 Public Contracts and Property Management Other Provisions Relating to... EXECUTIVE ORDER 11246 Prehearing Procedures § 60-30.11 Depositions upon oral examination. (a) Depositions; notice of examination. After commencement of the action, any party may take the testimony of any person...

Process and machinery description of equipment for deposition of canisters in medium-long deposition holes

International Nuclear Information System (INIS)

Kalbantner, P.

2001-08-01

In this report twelve methods are presented to deposit a canister with spent nuclear fuel in a horizontal hole, several canisters per hole (MLH). These methods are part of the KBS-3 system. They have been developed successively, after an analysis of weak points and strong points in previously described methods. In conformance with the guidelines for Project JADE, a choices of system has been considered during the development work. This is whether canister and bentonite buffer should be deposited 'in parts', i.e. at different occasions, but shortly after each other or 'in a package', i.e. together in a single package. The other choice in the guidelines for the JADE project, whether the canister should be placed in a radiation shield or not during transport in the secondary tunnels, was not relevant to MLR. The basic technical problem is depositing heavy objects, the canister and the buffer components, in an horizontal hole which is approximately 200 m deep. Two methods for depositing of the bentonite barrier and the canisters in separate processes have been studied. For depositing of the bentonite barrier and the canister 'in a package', four alternative techniques have been studied: a metallic sleeve around the package, a loading scoop that is rotated, a fork carriage and rails. The repeated transports in a hole, a consequence of depositing several canisters in the same hole, could lead to the rock being crushed. The mutual impact of machines, load and rock wall has therefore been particularly considered. In several methods, the use of a gangway has been proposed (steel plates or layer of ice). A failure mode and effect analysis has been performed for one of the twelve methods. When comparing with a method to deposit one canister per hole using the same technique, the need for equipment and resources is far larger for this MLH method if incidents should occur during depositing. The development work reported here has not yet yielded a definitive method for placing

Blanket guarantee, deposit insurance, and risk-shifting incentive: evidence from Indonesia

OpenAIRE

Kariastanto, Bayu

2011-01-01

Indonesia established a deposit insurance system to maintain stability in its banking sector after the abolishment of blanket guarantees in 2005. Since the insurance premiums are fixed and flat, deposit insurance may create an incentive for banks to take more risks and transfer the risks to the deposit insurer. Using an option pricing based model of deposit insurance, we compute the fair deposit insurance premiums for all banks listed on the Indonesian stock exchange. We find evidence that ba...

Perovskite Thin Films via Atomic Layer Deposition

KAUST Repository

Sutherland, Brandon R.; Hoogland, Sjoerd; Adachi, Michael M.; Kanjanaboos, Pongsakorn; Wong, Chris T. O.; McDowell, Jeffrey J.; Xu, Jixian; Voznyy, Oleksandr; Ning, Zhijun; Houtepen, Arjan J.; Sargent, Edward H.

2014-01-01

© 2014 Wiley-VCH Verlag GmbH & Co. KGaA. (Graph Presented) A new method to deposit perovskite thin films that benefit from the thickness control and conformality of atomic layer deposition (ALD) is detailed. A seed layer of ALD PbS is place-exchanged with PbI2 and subsequently CH3NH3PbI3 perovskite. These films show promising optical properties, with gain coefficients of 3200 ± 830 cm-1.

Perovskite Thin Films via Atomic Layer Deposition

KAUST Repository

Sutherland, Brandon R.

2014-10-30

© 2014 Wiley-VCH Verlag GmbH & Co. KGaA. (Graph Presented) A new method to deposit perovskite thin films that benefit from the thickness control and conformality of atomic layer deposition (ALD) is detailed. A seed layer of ALD PbS is place-exchanged with PbI2 and subsequently CH3NH3PbI3 perovskite. These films show promising optical properties, with gain coefficients of 3200 ± 830 cm-1.

Ore-Forming Systems In Volcanogenic-Sedimentary Sequences By The Example Of Base Metal Deposits Of The Caucasus And East Pontic Metallotect

Directory of Open Access Journals (Sweden)

Sergo KEKELIA

2004-06-01

Full Text Available By the example of Alpine volcanogenic base metal deposits of the central part of the AlpineHimalayan fold belt (East Pontic Metallotect and Caucasus, it has been demonstrated that their hydrothermal systems naturally emerge at various stages of active interaction of microplates-continental fragments of Eurasia and Gondwanaland. During the divergence stage, at the microplates-boundary zones within the marginal sea, hydrothermal-sedimentary Cu and polymetallic deposits have been formed; at the early convergence stage, within the paleo-island-arc systems, epigenetic Cu and in lesser extent, barite-polymetallic (Lesser Caucasus, and later both combined (hydrothermal-sedimentary and stockwork and epigenetic (mainly Cu- and Zn-containing deposits have been originated (East Pontic Metallotect. At the beginning of the collisional stage, in connection with antidrome volcanism within the back-arc volcanic structures, polyformational deposits (barite, barite-polymetallic, Cu, Au have been formed. This tendency persists during the whole collisional stage - in the within-plate and transplate Eocene volcanic depressions - mainly polymetallic deposits have been originated in which the increasing contents of Ag take place in comparison to Au. The authors share the opinion that the primarily- anomalous environments for Cu-Zn deposits can have been "specialized" basic and medium-acidic volcanics whereas for baritic and barite polymetallic deposits grey coloured and evaporitic sequences in the volcano-structure pedestals with buried highly mineralized brines seem to be most favorable.

Place identity and place scale: the impact of place salience.

OpenAIRE

Bernardo, Fátima; Palma-Oliveira, José-Manuel

2013-01-01

Research about place, place identity and attachment supports the idea that bonds with places may differ depending on the place scale. Based on the view that identity is context-dependent, this paper brings to the table the impact of manipulating the salience of place on the intensity of place identity and place attachment reported. A study was designed to examine place identity and place attachment in two groups of residents (permanent and temporary) at three different scales (nei...

Women take the island: nation, profession, place Women take the island: nation, profession, place

Directory of Open Access Journals (Sweden)

Ruth Morse

2008-04-01

Full Text Available The Tempest has been one of Shakespeare’s most adapted plays. Its stage history is concomitantly a history of the British theatre, from regularized comedy to semi-opera to pantomime to opera. It has had other lives, too, from its position in romantic ideas of Shakespeare’s biography and his so-called farewell to the stage, to a supporting role as witness for the nineteenth-century Darwinians’ idea of the missing link, to a veritable efflorescence of walk-on parts, cameos, and star vehicles in twentieth-century psychoanalytic and social arguments about European expansion.2 The play has given us individual poems and paintings, not to speak of screen-plays for several film adaptations. The Tempest has been one of Shakespeare’s most adapted plays. Its stage history is concomitantly a history of the British theatre, from regularized comedy to semi-opera to pantomime to opera. It has had other lives, too, from its position in romantic ideas of Shakespeare’s biography and his so-called farewell to the stage, to a supporting role as witness for the nineteenth-century Darwinians’ idea of the missing link, to a veritable efflorescence of walk-on parts, cameos, and star vehicles in twentieth-century psychoanalytic and social arguments about European expansion.2 The play has given us individual poems and paintings, not to speak of screen-plays for several film adaptations.

Study of particulate matter from Primary/Secondary Marine Aerosol and anthropogenic sources collected by a self-made passive sampler for the evaluation of the dry deposition impact on built heritage.

Science.gov (United States)

Morillas, Héctor; Maguregui, Maite; García-Florentino, Cristina; Marcaida, Iker; Madariaga, Juan Manuel

2016-04-15

Dry deposition is one of the most dangerous processes that can take place in the environment where the compounds that are suspended in the atmosphere can react directly on different surrounding materials, promoting decay processes. Usually this process is related with industrial/urban fog and/or marine aerosol in the coastal areas. Particularly, marine aerosol transports different types of salts which can be deposited on building materials and by dry deposition promotes different decay pathways. A new analytical methodology based on the combined use of Raman Spectroscopy and SEM-EDS (point-by-point and imaging) was applied. For that purpose, firstly evaporated seawater (presence of Primary Marine Aerosol (PMA)) was analyzed. After that, using a self-made passive sampler (SMPS), different suspended particles coming from marine aerosol (transformed particles in the atmosphere (Secondary Marine Aerosol (SMA)) and metallic airborne particulate matter coming from anthropogenic sources, were analyzed. Finally in order to observe if SMA and metallic particles identified in the SMPS can be deposited on a building, sandstone samples from La Galea Fortress (Getxo, north of Spain) located in front of the sea and in the place where the passive sampler was mounted were analyzed. Copyright © 2016 Elsevier B.V. All rights reserved.

Deposit Money Creation in Search Equilibrium

OpenAIRE

Keiichiro Kobayashi

2002-01-01

The endogenous creation of bank credit and of deposit money is modeled. If banks have a limited ability to commit to making interbank loans, then, in order for bank deposits to be accepted as liquid assets, an upper bound is placed upon the size of each bank's asset portfolio, where the bound is determined as a certain multiple of the bank's capital. In our search model, the Central Limit Theorem implies that the multiplier is a non-linear function of the aggregate level of bank assets. Thus ...

Anthropogenic nitrogen deposition ameliorates the decline in tree growth caused by a drier climate.

Science.gov (United States)

Ibáñez, Inés; Zak, Donald R; Burton, Andrew J; Pregitzer, Kurt S

2018-02-01

Most forest ecosystems are simultaneously affected by concurrent global change drivers. However, when assessing these effects, studies have mainly focused on the responses to single factors and have rarely evaluated the joined effects of the multiple aspects of environmental change. Here, we analyzed the combined effects of anthropogenic nitrogen (N) deposition and climatic conditions on the radial growth of Acer saccharum, a dominant tree species in eastern North American forests. We capitalized on a long-term N deposition study, replicated along a latitudinal gradient, that has been taking place for more than 20 yr. We analyzed tree radial growth as a function of anthropogenic N deposition (ambient and experimental addition) and of summer temperature and soil water conditions. Our results reveal that experimental N deposition enhances radial growth of this species, an effect that was accentuated as temperature increased and soil water became more limiting. The spatial and temporal extent of our data also allowed us to assert that the positive effects of growing under the experimental N deposition are likely due to changes in the physiological performance of this species, and not due to the positive correlation between soil N and soil water holding capacity, as has been previously speculated in other studies. Our simulations of tree growth under forecasted climate scenarios specific for this region also revealed that although anthropogenic N deposition may enhance tree growth under a large array of environmental conditions, it will not mitigate the expected effects of growing under the considerably drier conditions characteristic of our most extreme climatic scenario. © 2018 by the Ecological Society of America.

Intrinsic anomalous surface roughening of TiN films deposited by reactive sputtering

International Nuclear Information System (INIS)

Auger, M. A.; Vazquez, L.; Sanchez, O.; Cuerno, R.; Castro, M.; Jergel, M.

2006-01-01

We study surface kinetic roughening of TiN films grown on Si(100) substrates by dc reactive sputtering. The surface morphology of films deposited for different growth times under the same experimental conditions were analyzed by atomic force microscopy. The TiN films exhibit intrinsic anomalous scaling and multiscaling. The film kinetic roughening is characterized by a set of local exponent values α loc =1.0 and β loc =0.39, and global exponent values α=1.7 and β=0.67, with a coarsening exponent of 1/z=0.39. These properties are correlated to the local height-difference distribution function obeying power-law statistics. We associate this intrinsic anomalous scaling with the instability due to nonlocal shadowing effects that take place during thin-film growth by sputtering

Deposit competition and loan markets

NARCIS (Netherlands)

Arping, S.

Less-intense competition for deposits, by mitigating banks’ incentive to take excessive risks, is traditionally believed to lead to lower non-performing loan (NPL) ratios and more-stable banks. This paper revisits this proposition in a model with borrower moral hazard in which banks’ NPL ratios

Bundling in Place: Translating the NGSS into Place-Based Earth-System Science Curricula

Science.gov (United States)

Semken, S. C.

2016-12-01

Bundling is the process of grouping Performance Expectations (PEs) from the Next Generation Science Standards (NGSS) into coherent units based on a defined topic, idea, question, or phenomenon. Bundling sorts the PEs for a given grade or grade band into a teachable narrative: a key stage in building curriculum, instruction, and assessment from the NGSS. To encourage and facilitate this, bundling guidelines have recently been released on the NGSS website (nextgenscience.org/glossary/bundlesbundling), and example bundles for different grade bands and disciplines are also being developed and posted there. According to these guidelines the iterative process of bundling begins with organization of PEs according to natural connections among them, and alignment of the three NGSS dimensions (Disciplinary Core Ideas, Cross-Cutting Concepts, and Science and Engineering Practices) that underpin each PE. Bundles are grouped by coherence and increasing complexity into courses, and courses into course sets that should encompass all PEs for a grade band. Bundling offers a natural way to translate the NGSS into highly contextualized curricula such as place-based (PB) teaching, which is situated in specific places or regions and focused on natural and cultural features, processes, phenomena, history, and challenges to sustainability therein. Attributes of place and our individual and collective connections to place (sense of place) directly inform PB curriculum, pedagogy, and assessment. PEs can be bundled by their relevance to these themes. Following the NGSS guidelines, I model the process for PB instruction by bundling PEs around the themes of Paleozoic geology and carbonate deposition and their relationships to mining and calcining of limestone in Anthropocene cement production for developing communities. The bundles integrate aspects of Earth history, the carbon cycle, mineral resources, climate change, and sustainability using specific local examples and narratives. They are

Representation of a model of radionuclide transfer in food chains following deposition of strontium-90, cesium-137 and iodine-131 on areas for agricultural use

International Nuclear Information System (INIS)

Proehl, G.

1990-09-01

The 'SINK' model (contaminants in food chains - FORTRAN 77) was used in an attempt to predict the amounts of radioactivity building up in animal and vegetable foods after one single deposition of Sr-90, Cs-137 and I-131. The model is described in detail. The input quantities include such factors as time-integrated concentration of activity in the air just above the ground, physicochemical form of the radionuclides, activity deposited with precipitation and amount of rain to fall in any particular case. The model was so designed as to take account of 18 different plants, 11 animal products and 14 kinds of processed nutrients. The radionuclide contents of vegetable foods were calculated with reference to the season of the year, at which deposition took place. The estimations of the activity concentrations in animal foods were in each case based on different fudder rations. (orig./HP) [de

Deposition of particle-bound radionuclides in dry weather, fog, rain and snowfall

International Nuclear Information System (INIS)

Oberschachtsiek, D.; Sparmacher, H.; Kreh, R.; Adam, M.; Fuelber, K.; Stegger, J.; Bonka, H.

1992-01-01

Radionuclides emitted from nuclear plants and installations are transported in dry weather, because of turbulences and sedimentations, to plant parts above ground and near the ground and to other areas, and deposited there. The deposited activity is proportional to the activity concentration near the deposition area. In the case of particle-bound radionuclides it depends on the aerodynamic particle diameter, surface quality and other factors. In a large number of experiments deposition velocity was measured. In fog the particles to which radionuclides are bound grow by coagulation and condensation. The aerosol size spectrum changes with increasing distance from the place of emission. The type of the fog and the form of the emitted spectrum are important factors which influence this process. With normal activity distributions as a function of the aerodynamic particle diameter, the deposition velocity increases with the distance from the place of emission, up to a final value, due to the shift of the spectrum to larger diameters. (orig.) [de

World Distribution of Uranium Deposits (UDEPO) with uranium deposit classification. 2009 ed

International Nuclear Information System (INIS)

2009-10-01

The World Distribution of Uranium Deposits (UDEPO) database provides general, technical and geological information, including references, about the worldwide uranium deposits. UDEPO has been published on the internet which allows the users to register freely and to work with datasets (http://www-nfcis.iaea.org). The UDEPO web site is designed to allow users to retrieve data sets on a variety of deposit related topics ranging from specific information on individual uranium deposits to statistical information on uranium deposits worldwide. The basic building blocks for the UDEPO database are the more than 900 individual deposits for which information is available in the database. The database is arranged in a relational database format which has one main table and a number of associated tables. Structured nature of the database allows filtering and querying the database in more systematic way. The web site provides filtering and navigation to the data from the database. It has also a statistical tool which provides summary information on number of deposits and uranium resources by type and status, and by country and status. In this respect and with regard to the data presented, the UDEPO database is a unique database which provides freely accessible information on worldwide uranium deposits. Although a great effort is spent to have complete and accurate database, the users should take into consideration that there still might be missing or outdated data for individual deposits due to the rapid changes in the uranium industry due to the new exploration works which are ongoing everyday. This document and its supplementary CD-ROM represent a snapshot of the status of the database as of the end of 2008. However, the database is being continuously updated and the latest updates and additions can be accessed from the database web site (http://wwwnfcis.iaea.org)

Room temperature atomic layer deposited Al2O3 on CH3NH3PbI3 characterized by synchrotron-based X-ray photoelectron spectroscopy

Science.gov (United States)

Kot, Małgorzata; Das, Chittaranjan; Henkel, Karsten; Wojciechowski, Konrad; Snaith, Henry J.; Schmeisser, Dieter

2017-11-01

An ultrathin Al2O3 film deposited on methylammonium lead triiodide (CH3NH3PbI3) perovskite has the capability to suppress the carrier recombination process and improve the perovskite solar cells efficiency and stability. However, annealing at temperatures higher than 85 °C degrades the CH3NH3PbI3 perovskite film. The X-ray photoelectron spectroscopy study performed in this work indicates that it is possible to grow Al2O3 by atomic layer deposition on the perovskite at room temperature, however, besides pure Al2O3 some OH groups are found and the creation of lead and iodine oxides at the Al2O3/CH3NH3PbI3 interface takes place.

XPS study of the ultrathin a-C:H films deposited onto ion beam nitrided AISI 316 steel

International Nuclear Information System (INIS)

Meskinis, S.; Andrulevicius, M.; Kopustinskas, V.; Tamulevicius, S.

2005-01-01

Effects of the steel surface treatment by nitrogen ion beam and subsequent deposition of the diamond-like carbon (hydrogenated amorphous carbon (a-C:H) and nitrogen doped hydrogenated amorphous carbon (a-CN x :H)) films were investigated by means of the X-ray photoelectron spectroscopy (XPS). Experimental results show that nitrogen ion beam treatment of the AISI 316 steel surface even at room temperature results in the formation of the Cr and Fe nitrides. Replacement of the respective metal oxides by the nitrides takes place. Formation of the C-N bonds was observed for both ultrathin a-C:H and ultrathin a-CN x :H layers deposited onto the nitrided steel. Some Fe and/or Cr nitrides still were presented at the interface after the film deposition, too. Increased adhesion between the steel substrate and hydrogenated amorphous carbon layer after the ion beam nitridation was explained by three main factors. The first two is steel surface deoxidisation/passivation by nitrogen as a result of the ion beam treatment. The third one is carbon nitride formation at the nitrided steel-hydrogenated amorphous carbon (or a-CN x :H) film interface

CHEMICAL VAPOUR DEPOSITION FROM A RADIATION-SENSITIVE PRECURSOR

DEFF Research Database (Denmark)

2017-01-01

The present invention relates in one aspect to a method of depositing a thin film on a substrate by chemical vapour deposition (CVD) from a radiation-sensitive precursor substance. The method comprises the steps of: (i) placing the substrate in a reaction chamber of a CVD system; (ii) heating...... heating pulse followed by an idle period; (iii) during at least one of the idle periods, providing a pressure pulse of precursor substance inside the reaction chamber by feeding at least one precursor substance to the reaction chamber so as to establish a reaction partial pressure for thin film deposition...... is formed. According to a further aspect, the invention relates to a chemical vapour deposition (CVD) system for depositing a thin film onto a substrate using precursor substances containing at least one radiation sensitive species....

Analysis on depositional system and discussion on ore-formation conditions of channel sandstone type uranium deposit. Taking Dongsheng area, Ordos meso-cenozoic basin as an example

International Nuclear Information System (INIS)

Wu Rengui; Yu Dagan; Zhu Minqiang; Zhou Wanpeng; Chen Anping

2003-01-01

Applying the theory of depositional system, the depositional facies and depositional systems of the Zhiluo Formation in Dongsheng area are systematically analysed, and the authors proposed that sediments of the Zhiluo Formation are of fluvial facies, and streams of the Zhiluo time experienced three evolution stages, namely: the early braided stream, the middle low sinuosity meandering stream and the late high sinuosity meandering stream. Based on features of paleoclimatic evolution, the Zhiluo Formation is divided into two lithological members. The lower lithological member consists of sediments of braided and low sinuosity meandering streams under humid-ward paleoclimatic conditions forming grey sedimentary formation. The upper member is composed of sediments of meandering streams under arid-hot paleoclimatic conditions representing complex-colored (mainly red) sedimentary formation. It is suggested that uranium mineralization in the study area is of channel sandstone type and controlled by braided channel sediments. Besides, the ore-formation conditions for channel sandstone type uranium deposit are preliminarily discussed

Production of oil from Intermountain West tar sands deposits

Energy Technology Data Exchange (ETDEWEB)

Glassett, J.M.; Glassett, J.A.

1976-03-01

Six tar sand deposits in the Intermountain West, each containing more than one billion barrels of oil in place, are identified. All of these deposits are in eastern Utah and contain a total of twenty-eight billion barrels of oil. The names of the six deposits arranged in descending order of desirability for large-scale surface-mining oil recovery operations are as follows: Sunnyside, Tar Sand Triangle, Asphalt Ridge, P.R. Spring, Circle Cliffs, and Hill Creek. An overview of each deposit is presented including geology, surface-mining variables, chemical processing variables, environmental aspects, and economics. A comparison of Utah tar sands and Athabasca, Alberta, Canada tar sands is also presented.

Leaching of radium from mine deposits - application for planning of ground reclamation

International Nuclear Information System (INIS)

Chalupnik, S.

2002-01-01

Saline waters occurring in underground coal mines in Poland often contain natural radioactive isotopes, mainly 226 Ra from uranium series and 228 Ra from thorium series. Approximately 40% of total amount of radium remains underground in a form of radioactive deposits, but 225 MBq of 226 Ra and 400 MBq of 228 Ra are released daily into the rivers with mine effluents through surface settling ponds. Very peculiar situation is observed in coal mines, where as a result of precipitation of radium from radium-bearing waters radioactive deposits are formed. Sometimes natural radioactivity of such materials is very high, in case of scaling from coal mines radium concentration may reach 400000 Bq/kg - similar activity as for 3% uranium ore. Usually such deposits can be found underground, but sometimes co-precipitation of radium and barium takes place on the surface, in settling pond and in rivers. Therefore maintenance of solid and liquid waste with technologically enhanced natural radioactivity (TENORM) is a very important subject. Lately another problem appeared - due to the decrease of the production in Poland coal industry and dismantling of several coal mines, also the ground reclamation should be done in their vicinity. But in several cases deposits in the ponds contain enhanced levels of radium concentration. Therefore laboratory tests were done to investigate a possibility of the re-entry of radium into ground water or river waters from such deposits. Results show, that in the case of insoluble barium and radium sulphates co-precipitated out from waters type A, re-entry ratio is very small. Different situation can be observed in case of radium, adsorbed on bottom of sediments from waters type B, because re-entry ratio is much higher. Nevertheless, this phenomenon seems to be not so important and significant for the further pollution of the adjacent areas of the settling ponds in the future. (author)

Secondary halite deposits in the Iranian salt karst: general description and origin

Directory of Open Access Journals (Sweden)

Filippi Michal

2011-07-01

Full Text Available This paper summaries 12 years of documentation of secondary halite deposits in the Iranian salt karst. A variety of secondary halitedeposits was distinguished and classified into several groups, on the basis of the site and mechanism of their origin. Deposits formed:i via crystallization in/on streams and pools, ii from dripping, splashing and aerosol water, iii from evaporation of seepage and capillarywater, and iv other types of deposits. The following examples of halite forms were distinguished in each of the above mentionedgroup: i euhedral crystals, floating rafts (raft cones, thin brine surface crusts and films; ii straw stalactites, macrocrystalline skeletaland hyaline deposits, aerosol deposits; iii microcrystalline forms (crusts, stalactites and stalagmites, helictites; iv macrocrystallinehelictites, halite bottom fibers and spiders, crystals in fluvial sediments, euhedral halite crystals in rock salt, combined or transientforms and biologically induced deposits. The occurrence of particular forms depends strongly on the environment, especially on thetype of brine occurrence (pool, drip, splashing brine, microscopic capillary brine, etc., flow rate and its variation, atmospheric humidity,evaporation rate and, in some cases, on the air flow direction. Combined or transitional secondary deposits can be observed if theconditions changed during the deposition. Euhedral halite crystals originate solely below the brine surface of supersaturated streamsand lakes. Macrocrystalline skeletal deposits occur at places with rich irregular dripping and splashing (i.e., waterfalls, places withstrong dripping from the cave ceilings, etc.. Microcrystalline (fine grained deposits are generated by evaporation of capillary brineat places where brine is not present in a macroscopically visible form. Straw stalactites form at places where dripping is concentratedin small spots and is frequent sufficient to assure that the tip of the stalactite will not be

Essential qualities of children’s favorite places

Science.gov (United States)

Prakoso, S.

2018-03-01

This paper builds on an existential-phenomenology framework to better understand the essential qualities of children’s favorite places. Based on grounded theory, this study focused on the everyday life experiences of 25 children (14 girls and 11 boys), aged 9–12 years and living in Jakarta, whose housing environments reflected various spatial qualities. The results showed that all children reported having one or more favorite places. Despite differences in type, scale, form, and location of children’s favorite places, each existential place was a supportive urban space conceived, perceived, and lived through the meaning and symbolic use given to it by a child. The essential qualities of children’s favorite places were accessibility, a location within route from home to other destinations (such as a friend’s house or school), and a space providing a sense of comfort, security, and social affiliation, as well as experiences that were restorative, personal, sensory, and materialistic. This study may have implications for the design of urban places that foster the formation of children’s favorite spaces by taking into account these essential qualities of children’s lived-existential spaces.

Considerations on thermic and mechanic processes that appear when 3D printing using ABS fused deposition modelling technology

Science.gov (United States)

Amza, Catalin Gheorghe; Niţoi, Dan Florin

2018-02-01

3D printers are of recent history, but with an extremely rapid evolution both in technology and hardware involved. At present excellent performances are reached in applications such as 3D printing of various Acrylonitrile butadiene styrene (ABS) plastic parts for house building using Fused Deposition Modelling technology. Nevertheless, the thermic and mechanic processes that appear when manufacturing such plastic components are quite complex. This aspect is very important, especially when one wants to optimize the manufacturing of parts with certain geometrical complexity. The Finite Element Analysis/Modelling (FEA/FEM) is among the few methods that can study the thermic transfer processes and shape modifications that can appear due to non-seamar behavior that takes place when the ABS plastic material is cooling down. The current papers present such an analysis when simulating the deposition of several strings of materials. A thermic analysis is made followed by a study of deformations that appear when the structure cools down.

76 FR 54433 - Takes of Marine Mammals Incidental to Specified Activities; Taking Marine Mammals Incidental to a...

Science.gov (United States)

2011-09-01

... from the 10- airgun array and a single airgun at shallow, intermediate, and deep water depths. The 180... signals and transfer the data to the on- board processing system. In addition, at least 72 sonobuoys will... the survey effort (55%) will occur in water 100-1,000 m (328-3,281 ft) deep, 32% will take place in...

HOMING PLACE: TOWARDS A PARTICIPATORY, AMBULANT AND CONVERSIVE METHODOLOGY

OpenAIRE

Myers, Misha

2009-01-01

The practice-as-research project Homing Place proposes a transferable percipient-led methodology of performance and research activated by ambulant and conversive mechanisms as the culmination of this research. The thesis is comprised of a range of activity that represents a moment and way of writing practice. Three artworks that comprise part of the practical component of this thesis--- way from home, Take me to a place and Yodel Rodeo-- each involved participation and contribu...

Upcoming training sessions (up to end October) - Places available

CERN Multimedia

2016-01-01

Please find below a list of training sessions scheduled to take place up to the end of October with places available.   Safety and Language courses are not included here, you will find an up-to-date list in the Training Catalogue. If you need a course which is not featured  in the catalogue, please contact one of the following: your supervisor, your Departmental Training Officer or the relevant learning specialist.  

What it takes to successfully implement technology for aging in place: focus groups with stakeholders

NARCIS (Netherlands)

Eveline J.M. Wouters; Katrien G. Luijkx; Hubertus J.M. Vrijhoef; Sebastiaan Theodorus Michaël Peek MSc

2016-01-01

BACKGROUND: There is a growing interest in empowering older adults to age in place by deploying various types of technology (ie, eHealth, ambient assisted living technology, smart home technology, and gerontechnology). However, initiatives aimed at implementing these technologies are complicated by

High performance emitter for thermionic diode obtained by chemical vapor deposition

International Nuclear Information System (INIS)

Faron, R.; Bargues, M.; Durand, J.P.; Gillardeau, J.

1973-01-01

Vapor deposition process conditions presently known for tungsten and molybdenum (specifically the range of high temperatures and low pressures) permit the achievement of high performance thermionic emitters when used with an appropriate technology. One example of this uses the following series of successive vapor deposits, the five last vapor deposits constituting the fabrication of the emitting layer: Mo deposit for the formation of the nuclear fuel mechanical support; Mo deposit, which constitutes the sheath of the nuclear fuel; epitaxed Mo--W alloy deposit; epitaxed tungsten deposit; fine-grained tungsten deposit; and tungsten deposit with surface orientation according to plane (110)W. In accordance with vapor deposition techniques previously developed, such a sequence of deposits can easily be achieved with the same equipment, even without having to take out the part during the course of the process. (U.S.)

Comparison of stress in single and multiple layer depositions of plasma-deposited amorphous silicon dioxide

International Nuclear Information System (INIS)

Au, V; Charles, C; Boswell, R W

2006-01-01

The stress in a single-layer continuous deposition of amorphous silicon dioxide (SiO 2 ) film is compared with the stress within multiple-layer intermittent or 'stop-start' depositions. The films were deposited by helicon activated reactive evaporation (plasma assisted deposition with electron beam evaporation source) to a 1 μm total film thickness. The relationships for stress as a function of film thickness for single, two, four and eight layer depositions have been obtained by employing the substrate curvature technique on a post-deposition etch-back of the SiO 2 film. At film thicknesses of less than 300 nm, the stress-thickness relationships clearly show an increase in stress in the multiple-layer samples compared with the relationship for the single-layer film. By comparison, there is little variation in the film stress between the samples when it is measured at 1 μm film thickness. Localized variations in stress were not observed in the regions where the 'stop-start' depositions occurred. The experimental results are interpreted as a possible indication of the presence of unstable, strained Si-O-Si bonds in the amorphous SiO 2 film. It is proposed that the subsequent introduction of a 'stop-start' deposition process places additional strain on these bonds to affect the film structure. The experimental stress-thickness relationships were reproduced independently by assuming a linear relationship between the measured bow and film thickness. The constants of the linear model are interpreted as an indication of the density of the amorphous film structure

Limitations of patterning thin films by shadow mask high vacuum chemical vapor deposition

International Nuclear Information System (INIS)

Reinke, Michael; Kuzminykh, Yury; Hoffmann, Patrik

2014-01-01

A key factor in engineering integrated devices such as electro-optic switches or waveguides is the patterning of high quality crystalline thin films into specific geometries. In this contribution high vacuum chemical vapor deposition (HV-CVD) was employed to grow titanium dioxide (TiO 2 ) patterns onto silicon. The directed nature of precursor transport – which originates from the high vacuum environment during the process – allows shading certain regions on the substrate by shadow masks and thus depositing patterned thin films. While the use of such masks is an emerging field in stencil or shadow mask lithography, their use for structuring thin films within HV-CVD has not been reported so far. The advantage of the employed technique is the precise control of lateral spacing and of the distance between shading mask and substrate surface which is achieved by manufacturing them directly on the substrate. As precursor transport takes place in the molecular flow regime, the precursor impinging rates (and therefore the film growth rates) on the surface can be simulated as function of the reactor and shading mask geometry using a comparatively simple mathematical model. In the current contribution such a mathematical model, which predicts impinging rates on plain or shadow mask structured substrates, is presented. Its validity is confirmed by TiO 2 -deposition on plain silicon substrates (450 °C) using titanium tetra isopropoxide as precursor. Limitations of the patterning process are investigated by the deposition of TiO 2 on structured substrates and subsequent shadow mask lift-off. The geometry of the deposits is according to the mathematical model. Shading effects due to the growing film enables to fabricate deposits with predetermined variations in topography and non-flat top deposits which are complicated to obtain by classical clean room processes. As a result of the enhanced residual pressure of decomposition products and titanium precursors and the

The Relationship between Competition and Risk Taking Behavior of Indian Banks

OpenAIRE

Sarkar, Sanjukta; Sensarma, Rudra

2016-01-01

Under the traditional franchise value paradigm, competition in banking markets is considered to be risk enhancing because of its tendency to raise interest rates on deposits. Taking a contrarian view, Boyd and De Nicolo (2005) have argued that competition in the loan market can lead to lower interest rates and hence, reduce bank risk taking. Following these theoretical results, the empirical evidence on the relationship between risk and competition in banking has also been mixed. This paper a...

Diagnostic spectral characteristics of damouritization in granite type uranium deposit

International Nuclear Information System (INIS)

He Jianguo; Mao Yuxian; Li Jianzhong; Wang Changliang; Feng Mingyue; Rong Jiashu; Zhu Minqiang; Rao Minghui

2008-01-01

Spectral characteristics of different alteration type in uranium deposit are the prerequisite of selecting remote sensing spectral bands for uranium reconnaissance and exploration. It is also a basis for mapping alteration zone using imaging spectral data. Taking the No. 201 uranium deposit as example, the paper is focused on the spectral characteristics researching of damouritization in granite type uranium deposite. Through extracting diagnostic spectral feature of damourite and analyzing the reason causing absorption valley, it was found that spectral characteristics of damouritization in Chinese uranium deposit is different from that of illite in the spectral library published abroad. (authors)

Diagnostic spectral characteristics of damouritization in granite type uranium deposit

Energy Technology Data Exchange (ETDEWEB)

Jianguo, He; Yuxian, Mao; Jianzhong, Li; Changliang, Wang; Mingyue, Feng; Jiashu, Rong [Beijing Research Inst. of Uranium Geology, Beijing (China); Minqiang, Zhu; Minghui, Rao [East China Univ. of Technology, Fuzhou (China)

2008-07-15

Spectral characteristics of different alteration type in uranium deposit are the prerequisite of selecting remote sensing spectral bands for uranium reconnaissance and exploration. It is also a basis for mapping alteration zone using imaging spectral data. Taking the No. 201 uranium deposit as example, the paper is focused on the spectral characteristics researching of damouritization in granite type uranium deposite. Through extracting diagnostic spectral feature of damourite and analyzing the reason causing absorption valley, it was found that spectral characteristics of damouritization in Chinese uranium deposit is different from that of illite in the spectral library published abroad. (authors)

Quartz-pebble-conglomerate gold deposits: Chapter P in Mineral deposit models for resource assessment

Science.gov (United States)

Taylor, Ryan D.; Anderson, Eric D.

2018-05-17

Quartz-pebble-conglomerate gold deposits represent the largest repository of gold on Earth, largely due to the deposits of the Witwatersrand Basin, which account for nearly 40 percent of the total gold produced throughout Earth’s history. This deposit type has had a controversial history in regards to genetic models. However, most researchers conclude that they are paleoplacer deposits that have been modified by metamorphism and hydrothermal fluid flow subsequent to initial sedimentation.The deposits are found exclusively within fault-bounded depositional basins. The periphery of these basins commonly consists of granite-greenstone terranes, classic hosts for lode gold that source the detrital material infilling the basin. The gold reefs are typically located along unconformities or, less commonly, at the top of sedimentary beds. Large quartz pebbles and heavy-mineral concentrates are found associated with the gold. Deposits that formed prior to the Great Oxidation Event (circa 2.4 giga-annum [Ga]) contain pyrite, whereas younger deposits contain iron oxides. Uranium minerals and hydrocarbons are also notable features of some deposits.Much of the gold in these types of deposits forms crystalline features that are the product of local remobilization. However, some gold grains preserve textures that are undoubtedly of detrital origin. Other heavy minerals, such as pyrite, contain growth banding that is truncated along broken margins, which indicates that they were transported into place as opposed to forming by in situ growth in a hydrothermal setting.The ore tailings associated with these deposits commonly contain uranium-rich minerals and sulfides. Oxidation of the sulfides releases sulfuric acid and mobilizes various metals into the environment. The neutralizing potential of the tailings is minimal, since carbonate minerals are rare. The continuity of the tabular ore bodies, such as those of the Witwatersrand Basin, has allowed these mines to be the deepest in

Teachable Moment: Google Earth Takes Us There

Science.gov (United States)

Williams, Ann; Davinroy, Thomas C.

2015-01-01

In the current educational climate, where clearly articulated learning objectives are required, it is clear that the spontaneous teachable moment still has its place. Authors Ann Williams and Thomas Davinroy think that instructors from almost any discipline can employ Google Earth as a tool to take advantage of teachable moments through the…

Granular flows on erodible layers: type and evolution of flow and deposit structures

Science.gov (United States)

Crosta, G.; De Blasio, F.; De Caro, M.; Volpi, G.; Frattini, P.

2012-04-01

The interaction of a fast moving landslide mass with the basal layer over which movement takes place has been discussed in previous contributions. Nevertheless, the evolution of the structures within the moving mass and the erodible layer are still to be described in detail (Hungr and Evans, 2004; Crosta et al., 1992, 2006, 2009, 2011; Dufresne et al., 2010; Mangeney et al., 2010) and modeling results (Crosta et al., 2006, 2009, 2011; Mangeney et al., 2010). We present some of the results from a campaign of laboratory experiments aimed at studying the evolution of a granular flow at the impact with and during the successive spreading over a cohesionless erodible layer. We performed these test to study the processes and to collect data and evidences to compare them with the results of numerical simulations and to verify capabilities of numerical codes. The laboratory setup consists of an inclined slope and an horizontal sector where release and transport, and deposition take place, respectively. Materials used for the tests are: a uniform rounded siliceous sand (Hostun sand; 0.125-0.5 mm) commonly adopted in lab tests because free of scale effects, and a gravel made of angular elements (12 mm in ave. size). Both the materials have been tested in dry conditions. Different slope angles have been tested (40, 45, 50, 55, 50, 66°) as well as different thicknesses of the erodible layer (0, 0.5, 1, 2 cm) and volumes of the released material (1.5, 3, 5, 9.6 liters). Tests have been monitored by means of a high speed camera and the pre- and post-failure geometries have been surveyed by means of a laser scanner. Deposit description allowed also the computation of volumes and the characterization of the different structures developed and frozen into the deposit. Experiments allowed us to observe the extreme processes occurring during the movement and the mise en place of the deposits. In particular, we observe the formation of a clear wave-like feature developing during the

Deposit insurance reform; or, deregulation is the cart, not the horse

OpenAIRE

John H. Kareken

1990-01-01

This paper, originally published in the spring 1983 Quarterly Review, explains why flat-rate deposit insurance gives financial intermediaries an incentive to take on too much risk. It also discusses the purposes of deposit insurance and some ways reforms might serve those purposes. Three possible reforms are discussed: abolishing the insurance and requiring depository institutions to either hold safe assets or mark to market, reducing the deposit ceilings for insurance, and risk-adjusting the...

The industrial types of uranium deposits of Ukraine and their resources

International Nuclear Information System (INIS)

Bakarjiev, A. Ch.; Makhivchuk, O.F.; Popov, N.I.

1997-01-01

Industrial uranium deposits of Ukraine are represented by two types. Their origin is related to the processes of alkali metasomatism in areas of proto-activization that took place at the late orogenic stage of the formation of the Ukrainian shield. Deposits are located in large cataclatic zones that are formed at the intersection of deep fractures. (author). 5 figs

Installation for vacuum vapour deposition of nickel, more particularly for manufacturing neutron guides

International Nuclear Information System (INIS)

Samuel, F.

1986-01-01

The present invention proposes an installation for vacuum vapour deposition of Ni of the type including in a vacuum chamber a device for heating a mass of at least one Ni isotope to be evaporated, and a surface to be covered with deposited Ni facing the heater, is claimed, in which the heater includes a ribbon of W conformed in a middle part into a container in which is placed a refractory crucible in which is placed the Ni to be evaporated, and adapted to be connected at two terminal zones to an electrical circuit. The crucible is Al203. The invention finds an application in neutron guide fabrication, more particularly for Ni58 vapour deposition on the surfaces of the neutron guide [fr

Characterization of Cr2O3 thin films obtained by chemical vapor deposition

International Nuclear Information System (INIS)

Pillis, M.F.; Galego, E.; Serna, M.M.; Correa, O.V.; Ramanathan, L.V.; Franco, A.C.

2010-01-01

The goal of this work was the synthesis and characterization of Cr 2 O 3 thin films, obtained by chemical vapor deposition, using chromium acetylacetonate as chromium precursor. The growth of the films was carried out in a conventional horizontal MOCVD equipment, under pressures varying from 2 to 10 mbar, and temperature of 600 deg C. It was observed that the growth of the films only occurs when oxygen is present in the atmosphere. Under growth pressures of 2 and 5 mbar the growth takes place but under 10 mbar of pressure the precursor is dragged and the growth does not occur. The characterization of the films was performed by using scanning electron microscopy and X-ray diffraction. The films presented a columnar structure, and thickness varying from 40 to 250 nm. The influence of some process parameters is discussed. (author)

Permissible annual depositions and radionuclide concentrations in air

International Nuclear Information System (INIS)

Belyaev, V.A.; Golovko, M.Yu.

1993-01-01

It is established that it necessary to take into account the other ways of radionuclide intake apart from the inhalation one when determining the standards for radionuclide contamination of the atmospheric air. Whereby it is proposed to standardize annual depositions rather than permissible concentration in the atmospheric air for the ways related to radionuclide releases on the ground surface, which is explained by ambiguity of their dry deposition rate from the air. Formulae and results of calculation of standard characteristics are presented. The permissible radionuclide depositions, related to the intake through food chains are calculated with account for diet diversity, agroclimatic and phenological parameters in different regions of the country

THE RUPESTRIAN PLACES OF ALUNIŞU – POSSIBLE TOURISMGEOMORPHOLOGICAL SITES

Directory of Open Access Journals (Sweden)

I. A. IRIMUŞ

2014-06-01

Full Text Available The Rupestrian Places of Alunişu – Possible Tourism Geomorphological Sites. The existence of sandstones on very large areas in this region, corroborated with the fact that it appears in daylight in many places, has allowed man to make it profitable. The Kliwa sandstones specific to this area have been used in two different ways: firstly in a traditional manner, where the rock is used as a construction material and secondly, shaping it in situ. The friability of the sandstone deposits and the moderate compaction degree has enabled man to mould it even in a rudimentary manner specific to the Paleolithic or the Neolithic era. During the Middle Ages, on the background of the religious and political strains, a rather religious use of these places is recorded, also sustained by the climate and the morphology of the region. The low erosion rate, the isolation and a very difficult access have allowed great preservation in time and their turning into historical sites of great value. The anthropogenic factor completes, by its presence and by the activities deployed in the perimeter of this archeological site, the matrix of interactions between the physical and the environment made human in this way; man has changed the structure and the function of some of these religious places (churches and others from the sandstone deposits, and this fact enabled us to identify the evolution of this site by geomorphological criteria, a process simultaneous with the historical research. Due to the anthropogenic influence and the natural one, these geosites have gained a scientific, social, cultural, economic and tourism value as well as other additional values, which have turned them into geomorphosites.

A theoretical approach to the deposition and clearance of fibers with variable size in the human respiratory tract

International Nuclear Information System (INIS)

Sturm, Robert; Hofmann, Werner

2009-01-01

In the study presented here, a mathematical approach for the deposition and clearance of rigid and chemically stable fibers in the human respiratory tract (HRT) is described in detail. For the simulation of fiber transport and deposition in lung airways an advanced concept of the aerodynamic diameter is applied to a stochastic lung model with individual particle trajectories computed according to a random walk algorithm. Interception of fibrous material at airway bifurcations is considered by implementation of correction factors obtained from previously published numerical approaches to fiber deposition in short bronchial sequences. Fiber clearance is simulated on the basis of a multicompartment model, within which separate clearance scenarios are assumed for the alveolar, bronchiolar, and bronchial lung region and evacuation of fibrous material commonly takes place via the airway and extrathoracic path to the gastrointestinal tract (GIT) or via the transepithelial path to the lymph nodes and blood vessels. Deposition of fibrous particles in the HRT is controlled by the fiber aspect ratio β in as much as particles with diameters <0.1 μm deposit less effectively with increasing β, while larger particles exhibit a positive correlation between their deposition efficiencies and β. A change from sitting to light-work breathing conditions causes only insignificant modifications of total fiber deposition in the HRT, whereas alveolar and, above all, tubular deposition of fibrous particles with a diameter ≥0.1 μm are affected remarkably. For these particles enhancement of the inhalative flow rate results in an increase of the extrathoracic and bronchial deposition fractions. Concerning the clearance of fibers from the HRT, 24-h retention is noticeably influenced by β and, not less important, by the preferential deposition sites of the simulated particles. The significance of β with respect to particle size may be regarded as similar to that determined for the

The unending deposit insurance mess.

Science.gov (United States)

Kane, E J

1989-10-27

The thrift institution deposit insurance mess is rooted in defects in political and bureaucratic accountability. Under existing incentives, covering up evidence of poor regulatory performance and relaxing binding capital requirements are rational governmental responses to widespread industry insolvency. Similarly, aggressive industry risk taking is a rational response by thrift managers to regulatory forbearances. Far from acknowledging these incentive defects, the Bush plan for cleaning up the mess adopts theories that spotlight other causes: specifically, poor thrift management and the deregulation of thrift institution activities and of deposit interest rates. To end the mess, politicians and regulators must jettison these comfortable theories and surrender discretion that permits them to finesse the need to budget for governmental financial commitments.

Effect of Si ion irradiation on polycrystalline CdS thin film grown from novel photochemical deposition technique

International Nuclear Information System (INIS)

Soundeswaran, S.; Senthil Kumar, O.; Ramasamy, P.; Kabi Raj, D.; Avasthi, D.K.; Dhanasekaran, R.

2005-01-01

CdS thin films have been deposited from aqueous solution by photochemical reactions. The solution contains Cd(CH 3 COO) 2 and Na 2 S 2 O 3 , and pH is controlled in an acidic region by adding H 2 SO 4 . The solution is illuminated with light from a high-pressure mercury-arc lamp. CdS thin films are formed on a glass substrate by the heterogeneous nucleation and the deposited thin films have been subjected to high-energy Si ion irradiations. Si ion irradiation has been performed with an energy of 80 MeV at fluences of 1x10 11 , 1x10 12 , 1x10 13 and 1x10 14 ions/cm 2 using tandem pelletron accelerator. The irradiation-induced changes in CdS thin films are studied using XRD, Raman spectroscopy and photoluminescence. Broadening of the PL emission peak were observed with increasing irradiation fluence, which could be attributed to the band tailing effect of the Si ion irradiation. The lattice disorder takes place at high Si ion fluences

22 CFR 92.68 - Foreign Service fees and incidental costs in the taking of evidence.

Science.gov (United States)

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Foreign Service fees and incidental costs in... SERVICES NOTARIAL AND RELATED SERVICES Depositions and Letters Rogatory § 92.68 Foreign Service fees and incidental costs in the taking of evidence. The fees for the taking of evidence by officers of the Foreign...

Deposition of silicon oxynitride films by low energy ion beam assisted nitridation at room temperature

Science.gov (United States)

Youroukov, S.; Kitova, S.; Danev, G.

2008-05-01

The possibility is studied of growing thin silicon oxynitride films by e-gun evaporation of SiO and SiO2 together with concurrent bombardment with low energy N2+ ions from a cyclotron resonance (ECR) source at room temperature of substrates. The degree of nitridation and oxidation of the films is investigated by means of X-ray spectroscopy. The optical characteristics of the films, their environmental stability and adhesion to different substrates are examined. The results obtained show than the films deposited are transparent. It is found that in the case of SiO evaporation with concurrent N2+ ion bombardment, reactive implantation of nitrogen within the films takes place at room temperature of the substrate with the formation of a new silicon oxynitride compound even at low ion energy (150-200 eV).

On special training for correct deposition of semen.

Science.gov (United States)

Dyrendahl, I

1980-11-01

The semen volume used in AI has been reduced during recent years from 1.0-1.2 ml with fluid semen to 0.5 ml with medium straws and to 0.25 ml with ministraws. According correct deposition has become more important. Low fertility results attained by some technicians is often due to failure of precision in deposition. A special insemination syringe "Romeo" has been constructed in order to observe and correct this factor in the field work. The syringe can be fixed in the cervix after it is placed in the supposedly correct position. An instructor can then check the position, and there can be a dialogue about mistakes between instructor and technician. The instrument can also be used in the same way for training on slaughter animals of technicians who have repeatedly placed the brand mark of the ordinary searing syringe wrongly.

Applying reaction condition index to predict sandstone type uranium deposit

International Nuclear Information System (INIS)

Chen Gongxin; Liu Jinhui; Cheng Hai

2002-01-01

On the basic of the explanation of reaction condition index, the deduction of reaction condition index calculation principle, the hydrogeological setting in Gongpoquan basin in Baishan, Gansu province and the study of reaction condition index of its water source point, the north Luotuoquan area in Gongpoquan basin seems to be a favourable place for sandstone type uranium deposit, and the prospect area for sandstone type uranium deposit is delimitated

Backfilling of deposition tunnels: Use of bentonite pellets

International Nuclear Information System (INIS)

Dixon, David; Sanden, Torbjoern; Jonsson, Esther; Hansen, Johanna

2011-02-01

The state of knowledge related to use of bentonite pellets as part of backfill or other gap filling components in repository applications is reviewed. How the pellets interact with adjacent sealing materials and the surrounding rock mass is a critical aspect in determining backfill behaviour. The key features and processes that determine how the pellet component of the KBS-3V deposition tunnel backfill will behave are discussed and recommendations related to what additional information needs to be developed are provided. Experiences related to pellet material composition, size, shape, placement options and more importantly, the density to which they can be placed all indicate that there are significant limitations to the achievable as-placed density of bentonite pellet fill. Low as-placed density of the pellet fill component of the backfill is potentially problematic as the outermost regions of tunnel backfill will be the first region of the backfill to be contacted by water entering the tunnels. It is also through this region that initial water movement along the length of the deposition tunnels will occur. This will greatly influence the operations in a tunnel, especially with respect to situations where water is exiting the downstream face of still open deposition tunnels. Pellet-filled regions are also sensitive to groundwater salinity, susceptible to development of piping features and subsequent mechanical erosion by through flowing water, particularly in the period preceding deposition tunnel closure. A review of the experiences of various organisations considering use of bentonite-pellet materials as part of buffer or backfill barriers is provided in this document. From this information, potential options and limitations to use of pellets or pellet-granule mixtures in backfill are identified. Of particular importance is identification of the apparent upper-limits of dry density to which such materials can to be placed in the field. These bounds will

Backfilling of deposition tunnels: Use of bentonite pellets

Energy Technology Data Exchange (ETDEWEB)

Dixon, David (Atomic Energy of Canada Limited (Canada)); Sanden, Torbjoern (Clay Technology AB (Sweden)); Jonsson, Esther (Swedish Nuclear Fuel and Waste Mangaement Co. (Sweden)); Hansen, Johanna (Posiva Oy (Finland))

2011-02-15

The state of knowledge related to use of bentonite pellets as part of backfill or other gap filling components in repository applications is reviewed. How the pellets interact with adjacent sealing materials and the surrounding rock mass is a critical aspect in determining backfill behaviour. The key features and processes that determine how the pellet component of the KBS-3V deposition tunnel backfill will behave are discussed and recommendations related to what additional information needs to be developed are provided. Experiences related to pellet material composition, size, shape, placement options and more importantly, the density to which they can be placed all indicate that there are significant limitations to the achievable as-placed density of bentonite pellet fill. Low as-placed density of the pellet fill component of the backfill is potentially problematic as the outermost regions of tunnel backfill will be the first region of the backfill to be contacted by water entering the tunnels. It is also through this region that initial water movement along the length of the deposition tunnels will occur. This will greatly influence the operations in a tunnel, especially with respect to situations where water is exiting the downstream face of still open deposition tunnels. Pellet-filled regions are also sensitive to groundwater salinity, susceptible to development of piping features and subsequent mechanical erosion by through flowing water, particularly in the period preceding deposition tunnel closure. A review of the experiences of various organisations considering use of bentonite-pellet materials as part of buffer or backfill barriers is provided in this document. From this information, potential options and limitations to use of pellets or pellet-granule mixtures in backfill are identified. Of particular importance is identification of the apparent upper-limits of dry density to which such materials can to be placed in the field. These bounds will

Assessing future economic impacts of acidic deposition on the recreational fishery of eastern Canada

International Nuclear Information System (INIS)

1990-01-01

A study was carried out to assess the socio-economic impacts and net economic value effects related to potential reduction in acidic deposition on the sports fishery of eastern Canada. Impacts and net economic effects that would have occurred from 1950 to 1985 if emission/deposition controls were in place are measured. Impacts and net economic effects that will occur from 1986 to 2021 if controls are put in place in the future are also measured. The study incorporated the latest data describing the relationship of acidic deposition to lake pH levels and ultimate impact on fish survival, and applies a spatial analysis system to model changes in sport fish availability with respect to pH changes and fish survival responses. It was found that if emission controls were put in place beginning in 1950 the Canadian economy would have accrued $4.3 billion in net economic value from 1950 to 1985 inclusive. The 1986 value of the historical stream of losses that occurred because controls were not put in place is $24 billion assuming a 10% rate of return. If controls were put in place in the future, net economic value to Canada due to increased angler activity would be $4.2 billion for the period 1986-2021. The value in 1986 would be $925 million. 9 figs., 34 tabs

Syrian bean-caper (Zygophyllum fabago L.) improves organic matter and other properties of mine wastes deposits.

Science.gov (United States)

Kabas, S; Arocena, J M; Acosta, J A; Faz, A; Martínez-Martínez, S; Zornoza, R; Carmona, D M

2014-01-01

The omni-presence of Zygophyllum fabago L. (Syrian bean-caper) natural colonies in post mining areas prompted us to investigate its contributions to reclamation of mine wastes deposits in southeast Spain. Select plant-related (edaphic) characteristics and bio- and water soluble-Cd, Cu, Pb and Zn in rhizosphere of Z. fabago were compared to deposits one year since application of pig slurry and marble waste. Total N in rhizosphere increased up to a factor of 20X (339 vs 17 mg N kg(-1)) in El Gorguel and 27X (85 vs 3.1 mg N kg(-1)) in El Lirio sites. Organic matter accumulation in rhizosphere from litter and roots of Z. fabago increased organic C from 6.6 to 19.5 g kg(-1) in El Gorguel and from 2.1 to 5.7 g kg(-1) in El Lirio in one year. Dissolution of inorganic C takes place due to organic acids from root exudates of Z. fabago. Reduction in bio-available Cd, Cu, Pb, and Zn in rhizosphere of Z. fabago at El Lirio is attributed to increase in pH from 5.3 to 7.7 through marble waste addition, although increased cation exchange capacity may also have played a role. Addition of marble waste to encourage colonization by Z. fabago in acidic mine wastes deposits was recommended.

A place to share: Some thoughts about the meaning of territory and ...

African Journals Online (AJOL)

This article proffers some thoughts in reply to the following question: how can we think about God in a theology that takes into account the concept of place in such a way that we are able to live together in a salvific way with others, sharing a place as equals? Concepts such as “territory” and “territoriality” are helpful, because ...

In situ estimation of erosion and deposition thresholds by Acoustic Doppler Velocimeter (ADV)

DEFF Research Database (Denmark)

Andersen, T.J.; Fredsøe, Jørgen; Pejrup, M.

2007-01-01

Field-based estimations of bed shear stress have been made using SonTek/YSI 10 MHz ADVs (Acoustic Doppler Velocimeter) at the Kongsmark mudflat, Danish Wadden Sea, in order to test if it was possible to estimate erosion and deposition thresholds in situ by use of unidirectional tidal and orbital...... (wave) currents. The results were promising and erosion thresholds were in the same range as those observed in EROMES erosion experiments carried out at the same site. Similarly, the short-term erosion rates which could be calculated matched closely those obtained with EROMES, and were in the same range...... as those published for a large annular flume (Sea Carousel) from another fine-grained site. This indicates that the erosion rates obtained with those two erosion-instruments are reasonable estimates of the actual erosion taking place under natural tidal current and waves. One advantage of the use of ADVs...

Mechanistic study of aerosol dry deposition on vegetated canopies

International Nuclear Information System (INIS)

Petroff, A.

2005-04-01

The dry deposition of aerosols onto vegetated canopies is modelled through a mechanistic approach. The interaction between aerosols and vegetation is first formulated by using a set of parameters, which are defined at the local scale of one surface. The overall deposition is then deduced at the canopy scale through an up-scaling procedure based on the statistic distribution parameters. This model takes into account the canopy structural and morphological properties, and the main characteristics of the turbulent flow. Deposition mechanisms considered are Brownian diffusion, interception, initial and turbulent impaction, initially with coniferous branches and then with entire canopies of different roughness, such as grass, crop field and forest. (author)

Sacred places in global big cities

DEFF Research Database (Denmark)

Greve, Anni

the relation between the sacred and the profane, and about the role of the sacred in modern societies. The question is if the development of modern societies has implied the gradual abolishment of religious beliefs, rituals and rites, or has it on the contrary implied the installment of new forms of religious...... beliefs and sacred places, which are cultivated through regular rituals and rites, just as some traditional societies have cultivated for instance totemism. This paper will take its point of departure in Durkheim’s study of The Elementary Forms of Religious Life from 1912. Then it will turn......The question of sacred places in modern societies involves an analytical perspective, which is not very prevalent in sociology, namely the anthropological or even better: the ethnological perspective. With this theme we have entered a veritable dispute, or controversy, in sociology about...

Understanding stakeholders' attitudes toward water management interventions: Role of place meanings

Science.gov (United States)

Jacobs, Maarten H.; Buijs, Arjen E.

2011-01-01

Water resource managers increasingly need to take the opinions of stakeholders into account when planning interventions. We studied stakeholders' concerns in two water management planning contexts, focusing on the meanings assigned to places and on attitudes toward proposed interventions. Semistructured interviews were held, and public meetings were observed in order to collect data. Five categories of place meanings emerged from the analysis: beauty (esthetic judgments), functionality (ways of use), attachment (feelings of belonging), biodiversity (meanings pertaining to nature), and risk (worries about current or future events). These categories reflect the basic dimensions of sense of place. Our results suggest that stakeholders' attitudes toward proposed interventions are, to a great extent, derived from their place meanings. Discussing place meanings during participatory planning processes could contribute substantially to successful water management.

Do places matter? A multi-level analysis of regional variations in health-related behaviour in Britain.

Science.gov (United States)

Duncan, C; Jones, K; Moon, G

1993-09-01

A number of commentators have argued that there is a distinctive geography of health-related behaviour. Behaviour has to be understood not only in terms of individual characteristics, but also in relation to local cultures. Places matter, and the context in which behaviour takes place is crucial for understanding and policy. Previous empirical research has been unable to operationalize these ideas and take simultaneous account of both individual compositional and aggregate contextual factors. The present paper addresses this shortcoming through a multi-level analysis of smoking and drinking behaviours recorded in a large-scale national survey. It suggests that place, expressed as regional differences, may be less important than previously implied.

75 FR 31682 - Disclosures for Non-Federally Insured Depository Institutions Under the Federal Deposit Insurance...

Science.gov (United States)

2010-06-04

..., DC 20580. SUPPLEMENTARY INFORMATION: I. Introduction In 1991, as part of the Federal Deposit... advertising and at deposit windows, principal places of business, and branches, the institution must disclose...) established specific exemptions to the advertising disclosure requirements; (3) modified the requirements for...

Operational Efficiency of Bank Loans and Deposits: A Case Study of Vietnamese Banking System

Directory of Open Access Journals (Sweden)

Tram Nguyen

2018-01-01

Full Text Available This paper examines whether there is a causal relationship between bank loans and deposits in the Vietnamese banking system and the efficiency of the use of loans and deposits by the Vietnamese banks. In a country such as Vietnam, where inter-bank money markets are relatively underdeveloped, one would expect a reasonably strong relationship between deposits and loans. A pooled cross-sectional sample of financial ratios is collected from annual reports of 44 Vietnamese banks covering the period 2008–2015. The explanatory power of instrumental variables in relation to the endogenous variables is tested. A deterministic frontier model based on corrected ordinary least squares, estimated by three-stage least squares on a simultaneous equations model, is employed to derive the frontiers for the sampled banks as well as to estimate the causality between bank loans and deposits. Our findings suggest that, in an underdeveloped banking system such as Vietnam, bank deposits have a positive and significant impact on bank loans, but the reverse relationship is not significant. It is further suggested that in deposit-taking and loan-creating activities, Vietnamese banks performed moderately well over the period examined; however, in the near future, they should start to focus more on deposit-taking activities.

Places available - Technical training (up to the end of 2015)

CERN Multimedia

2015-01-01

Please find below all the upcoming courses (until December) that are currently missing participants, required for the courses to take place.     *Click on the picture*   For more details about a course and to register, please go to the Training Catalogue.

Uniform deposition of size-selected clusters using Lissajous scanning

International Nuclear Information System (INIS)

Beniya, Atsushi; Watanabe, Yoshihide; Hirata, Hirohito

2016-01-01

Size-selected clusters can be deposited on the surface using size-selected cluster ion beams. However, because of the cross-sectional intensity distribution of the ion beam, it is difficult to define the coverage of the deposited clusters. The aggregation probability of the cluster depends on coverage, whereas cluster size on the surface depends on the position, despite the size-selected clusters are deposited. It is crucial, therefore, to deposit clusters uniformly on the surface. In this study, size-selected clusters were deposited uniformly on surfaces by scanning the cluster ions in the form of Lissajous pattern. Two sets of deflector electrodes set in orthogonal directions were placed in front of the sample surface. Triangular waves were applied to the electrodes with an irrational frequency ratio to ensure that the ion trajectory filled the sample surface. The advantages of this method are simplicity and low cost of setup compared with raster scanning method. The authors further investigated CO adsorption on size-selected Pt n (n = 7, 15, 20) clusters uniformly deposited on the Al 2 O 3 /NiAl(110) surface and demonstrated the importance of uniform deposition.

Uniform deposition of size-selected clusters using Lissajous scanning

Energy Technology Data Exchange (ETDEWEB)

Beniya, Atsushi; Watanabe, Yoshihide, E-mail: e0827@mosk.tytlabs.co.jp [Toyota Central R& D Labs., Inc., 41-1 Yokomichi, Nagakute, Aichi 480-1192 (Japan); Hirata, Hirohito [Toyota Motor Corporation, 1200 Mishuku, Susono, Shizuoka 410-1193 (Japan)

2016-05-15

Size-selected clusters can be deposited on the surface using size-selected cluster ion beams. However, because of the cross-sectional intensity distribution of the ion beam, it is difficult to define the coverage of the deposited clusters. The aggregation probability of the cluster depends on coverage, whereas cluster size on the surface depends on the position, despite the size-selected clusters are deposited. It is crucial, therefore, to deposit clusters uniformly on the surface. In this study, size-selected clusters were deposited uniformly on surfaces by scanning the cluster ions in the form of Lissajous pattern. Two sets of deflector electrodes set in orthogonal directions were placed in front of the sample surface. Triangular waves were applied to the electrodes with an irrational frequency ratio to ensure that the ion trajectory filled the sample surface. The advantages of this method are simplicity and low cost of setup compared with raster scanning method. The authors further investigated CO adsorption on size-selected Pt{sub n} (n = 7, 15, 20) clusters uniformly deposited on the Al{sub 2}O{sub 3}/NiAl(110) surface and demonstrated the importance of uniform deposition.

Deposition of insoluble elastin by pulmonary fibroblasts from patients with COPD is increased by treatment with versican siRNA.

Science.gov (United States)

Wu, Lian; Zhang, Jing; Qu, Jie Ming; Bai, Chun-Xue; Merrilees, Mervyn J

2017-01-01

A reduced content of alveolar elastic fibers is a key feature of COPD lung. Despite continued elastogenic potential by alveolar fibroblasts in the lung affected by COPD, repair of elastic fibers does not take place, which is due to increased levels of the chondroitin sulfate proteoglycan versican that inhibits the assembly of tropoelastin into fibers. In this study, primary pulmonary fibroblast cell lines from COPD and non-COPD patients were treated with a small interfering RNA (siRNA) against versican to determine if knockdown of versican could restore the deposition of insoluble elastin. Versican siRNA treatment reduced versican expression and secretion by pulmonary fibroblasts from both COPD and non-COPD patients ( P elastin in the COPD cell cultures ( P elastin (tropoelastin) in either the COPD or non-COPD cell cultures, supporting a role for versican in inhibiting assembly but not synthesis of tropoelastin. These results suggest that removal or knockdown of versican may be a possible therapeutic strategy for increasing deposition of insoluble elastin and stimulating repair of elastic fibers in COPD lung.

Physical hazards (noise, heat, vibration, illumination) - control at work place, methods and strategies

International Nuclear Information System (INIS)

Bose, M.; Srivastava, P.; Ganesh, G.

2016-01-01

The industrial work is getting modernized more day by day leading to more physical hazard. It is forcing the line management stressed upon in relation to the work place physical hazard. In order to keep the work place free from physical hazard it is required to use proper tool like work place assessment, measuring the parameters and analyze the end result which force us to take proper control measures to check and eliminate the physical hazard. (author)

Deposition of silicon oxynitride films by low energy ion beam assisted nitridation at room temperature

Energy Technology Data Exchange (ETDEWEB)

Youroukov, S; Kitova, S; Danev, G [Central Laboratory of Photoprocesses, Bulgarian Academy of Sciences, Acad. G. Bonchev Str., Bl. 109, 113 Sofia (Bulgaria)], E-mail: skitova@clf.bas.bg

2008-05-01

The possibility is studied of growing thin silicon oxynitride films by e-gun evaporation of SiO and SiO{sub 2} together with concurrent bombardment with low energy N{sub 2}{sup +} ions from a cyclotron resonance (ECR) source at room temperature of substrates. The degree of nitridation and oxidation of the films is investigated by means of X-ray spectroscopy. The optical characteristics of the films, their environmental stability and adhesion to different substrates are examined. The results obtained show than the films deposited are transparent. It is found that in the case of SiO evaporation with concurrent N{sub 2}{sup +} ion bombardment, reactive implantation of nitrogen within the films takes place at room temperature of the substrate with the formation of a new silicon oxynitride compound even at low ion energy (150-200 eV)

Energy deposition model for low-energy electrons (10-10 000 eV) in air

International Nuclear Information System (INIS)

Roldan, A.; Perez, J.M.; Williart, A.; Blanco, F.; Garcia, G.

2004-01-01

An energy deposition model for electrons in air that can be useful in microdosimetric applications is presented in this study. The model is based on a Monte Carlo simulation of the single electron scattering processes that can take place with the molecular constituents of the air in the energy range 10-10 000 eV. The input parameters for this procedure have been the electron scattering cross sections, both differential and integral. These parameters were calculated using a model potential method which describes the electron scattering with the molecular constituent of air. The reliability of the calculated integral cross section values has been evaluated by comparison with direct total electron scattering cross-section measurements performed by us in a transmission beam experiment. Experimental energy loss spectra for electrons in air have been used as probability distribution functions to define the electron energy loss in single collision events. The resulting model has been applied to simulate the electron transport through a gas cell containing air at different pressures and the results have been compared with those observed in the experiments. Finally, as an example of its applicability to dosimetric issues, the energy deposition of 10 000 eV by means of successive collisions in a free air chamber has been simulated

Uranium deposits associated to tertiary acid volcanism of the Pena Blanca Sierra (Chihuahua, Mexico)

International Nuclear Information System (INIS)

Aniel, B.

1986-12-01

The uraniferous deposits located in the Sierra de Pena Blanca (Chihuahua, Mexico) are the consequence of successive events that modified acid volcanic rocks. The devitrification of the Nopal Formation, vitroclastic tuffs, is esential in the cooling history because it releases uranium that becomes available. The uranium present in fluids as uranylcarbonate complexes, precipitate along the lamellea of hematite (exsolutions of the ilmenites). The presence of sulfur causes the destabilization of the ilmenites with uranium oxide (pitchblende - titanium oxide - pyrite), the pseudomorph of magnetites (pitchblende - pyrite) and the transformation of hematite into pyrite. The silice coming from the kaolinization of feldspars recristallizes as microcristalline quartz so that the rock appears compact. Fractures cause the uplifting of the lower unit of Nopal formation. It has been altered to montmorillonite. A carbonatation of this tuff has been observed and these two types of alteration occur after kaolinization. The Escuadra formation overlies the Nopal formation. The deposition takes place on an eroded basement where a soil developed. The two formations will together undergo transformations due to the saturation level and the primary ore will be only oxidized or oxidized, transported and reconcentrated. Late and localized thermal activities have been observed and may be the result of tectonic movements occurring after the supergene modification [fr

Discussion on geochemical characteristics, mechanism and prospecting model of gluey type sandstone uranium mineralization--taking Redwell uranium deposit as an example

International Nuclear Information System (INIS)

Wang Jinping

1998-01-01

Redwell uranium deposit hosted in the red clastic rock formation, is a typical example of gluey type uranium mineralization, which has not been reported so far in China. Based on the study of geochemical characteristics of Redwell deposit, the author discusses the genetic mechanism of this type deposits, and proposes the prospecting model of 4 in 1 of red bed-fault-oil gas-uranium source

Gas in Place Resource Assessment for Concentrated Hydrate Deposits in the Kumano Forearc Basin, Offshore Japan, from NanTroSEIZE and 3D Seismic Data

Science.gov (United States)

Taladay, K.; Boston, B.

2015-12-01

Natural gas hydrates (NGHs) are crystalline inclusion compounds that form within the pore spaces of marine sediments along continental margins worldwide. It has been proposed that these NGH deposits are the largest dynamic reservoir of organic carbon on this planet, yet global estimates for the amount of gas in place (GIP) range across several orders of magnitude. Thus there is a tremendous need for climate scientists and countries seeking energy security to better constrain the amount of GIP locked up in NGHs through the development of rigorous exploration strategies and standardized reservoir characterization methods. This research utilizes NanTroSEIZE drilling data from International Ocean Drilling Program (IODP) Sites C0002 and C0009 to constrain 3D seismic interpretations of the gas hydrate petroleum system in the Kumano Forearc Basin. We investigate the gas source, fluid migration mechanisms and pathways, and the 3D distribution of prospective HCZs. There is empirical and interpretive evidence that deeply sourced fluids charge concentrated NGH deposits just above the base of gas hydrate stability (BGHS) appearing in the seismic data as continuous bottoms simulating reflections (BSRs). These HCZs cover an area of 11 by 18 km, range in thickness between 10 - 80 m with an average thickness of 40 m, and are analogous to the confirmed HCZs at Daini Atsumi Knoll in the eastern Nankai Trough where the first offshore NGH production trial was conducted in 2013. For consistency, we calculated a volumetric GIP estimate using the same method employed by Japan Oil, Gas and Metals National Corporation (JOGMEC) to estimate GIP in the eastern Nankai Trough. Double BSRs are also common throughout the basin, and BGHS modeling along with drilling indicators for gas hydrates beneath the primary BSRs provides compelling evidence that the double BSRs reflect a BGHS for structure-II methane-ethane hydrates beneath a structure-I methane hydrate phase boundary. Additional drilling

Experimental Study and Mathematical Modeling of Asphaltene Deposition Mechanism in Core Samples

Directory of Open Access Journals (Sweden)

Jafari Behbahani T.

2015-11-01

Full Text Available In this work, experimental studies were conducted to determine the effect of asphaltene deposition on the permeability reduction and porosity reduction of carbonate, sandstone and dolomite rock samples using an Iranian bottom hole live oil sample which is close to reservoir conditions, whereas in the majority of previous work, a mixture of recombined oil (a mixture of dead oil and associated gas was injected into a core sample which is far from reservoir conditions. The effect of the oil injection rate on asphaltene deposition and permeability reduction was studied. The experimental results showed that an increase in the oil injection flow rate can result in an increase in asphaltene deposition and permeability reduction. Also, it can be observed that at lower injection flow rates, a monotonic decrease in permeability of the rock samples can be attained upon increasing the injection flow rate, while at higher injection rates, after a decrease in rock permeability, an increasing trend is observed before a steady-state condition can be reached. The experimental results also showed that the rock type can affect the amount of asphaltene deposition, and the asphaltene deposition has different mechanisms in sandstone and carbonate core samples. It can be seen that the adsorption and plugging mechanisms have a more important role in asphaltene deposition in carbonate core samples than sandstone core samples. From the results, it can be observed that the pore volumes of the injected crude oil are higher for sandstone cores compared with the carbonate cores. Also, it can be inferred that three depositional types may take place during the crude oil injection, i.e., continuous deposition for low-permeability cores, slow, steady plugging for high-permeability cores and steady deposition for medium-permeability cores. It can be seen from the experimental results that damage to the core samples was found to increase when the production pressures were

Impact of beaver ponds on river discharge and sediment deposition along the Chevral River, Ardennes, Belgium

Science.gov (United States)

Nyssen, Jan; Frankl, Amaury; Pontzeele, Jolien; De Visscher, Maarten; Billi, Paolo

2013-04-01

With the recovery of the European beaver (Castor fiber) and their capacity to engineer fluvial landscapes, questions arise as to how they influence river discharge and sediment transport. The Chevral river (Ardennes, Belgium) contains two beaver dam sequences which appeared in 2004 and count now about 30 dams. Flow discharges and sediment fluxes were measured at the in- and outflow of each dam sequence. Volumes of sediment deposited behind the dams were measured. Between 2004 and 2011, peak flows were topped off, and the magnitude of extreme events decreased. 1710 m³ of sediment were deposited behind the beaver dams, with an average sediment thickness of 25 cm. The thickness of the sediment layer is related to the area of the beaver ponds. Along the stream, beaver pond sediment thickness displayed a sinusoidal deposition pattern, in which ponds with thick sediment layers were preceded by a series of ponds with thinner sediment layers. A downstream textural coarsening in the dam sequences was also observed, probably due to dam failures subsequent to surges. Differences in sediment flux between the in- and outflow at the beaver pond sequence were related to the river hydrograph, with deposition taking place during the rising limbs and slight erosion during the falling limbs. The seven-year-old sequences have filtered 190 tons of sediment out of the Chevral river, which is of the same order of magnitude as the 374 tons measured in pond deposits, with the difference between the values corresponding to beaver excavations (60 tons), inflow from small tributaries, and runoff from the valley flanks. Hydrogeomorphic effects of C. fiber and C. canadensis activity are similar in magnitude. The detailed analysis of changes to hydrology in beaver pond sequences confirms the potential of beavers to contribute to river and wetland restoration and catchment management.

Turn and jump: how time & place fell apart

CERN Document Server

Mansfield, Howard

2013-01-01

Before Thomas Edison, light and fire were thought to be one and the same. Turns out, they were separate things altogether. This book takes a similar relationship, that of time and place, and shows how they, too, were once inseparable. Time keeping was once a local affair, when small towns set their own pace according to the rising and setting of the sun. Then, in 1883, the expanding railroads necessitated the creation of Standard Time zones, and communities became linked by a universal time. Here Howard Mansfield explores how our sudden interconnectedness, both physically, as through the railroad, and through inventions like the telegraph, changed our concept of time and place forever.

Learning as Existential Engagement with/in Place: Departing from Vandenberg and the Reams

Science.gov (United States)

Hung, Ruyu

2014-01-01

This article takes Vandenberg's critique of Ream and Ream's view on the Deweyan learning environment as a departing point to explore the educational meaning of place. The divergence between Vandenberg and the Reams reminds us that the place is not merely a physical site for learners to be located in but also a horizon to be engaged with.…

Reframing place promotion, place marketing, and place branding - moving beyond conceptual confusion

NARCIS (Netherlands)

Boisen, Martin; Terlouw, Kees; Groote, Peter; Couwenberg, Oscar

2017-01-01

The literature and practice of place promotion, place marketing and place branding lack a common understanding of what these three concepts mean and through what kind of policies they can be implemented. Although scholars have provided several theoretical frameworks and definitions, both scholars

Sandstone uranium deposits of Eurasia – from genetic concepts to forecasting and new discoveries

International Nuclear Information System (INIS)

Pechenkin, I.

2014-01-01

the location of infiltration uranium deposits of the Tien Shan megaprovince and the pattern of development of the Pacific Plate subduction. In both cases young sandstone deposits tend to be situated close to the zone of subsiding geodynamic activity. Endogene uranium bodies can be found near the contact area of collision plates. The size of both endogene and exogene objects in the south and east of the Eurasian Plate differ considerably. The given material bears evidence of a close spacial connection between part of sandstone uranium deposits and endogene uranium deposits. Both types of uranium deposits belong to the same ore metallogenic zoning which is entirely dependent on the global geodynamic processes taking place in the crust and mantle on the fringes of the Eurasian continent. This makes it possible to increase the prospects for the future of many parts of the world. (author)

Indium-111 platelet imaging for detection of platelet deposition in abdominal aneurysms and prosthetic arterial grafts

International Nuclear Information System (INIS)

Ritchie, J.L.; Stratton, J.R.; Thiele, B.; Haminton, G.W.; Warrick, L.N.; Huang, T.W.; Harker, L.A.

1981-01-01

Thirty-four platelet imaging studies were performed in 23 patients to determine whether platelet deposition could be detected in patients with vascular aneurysms (18 patients) or in patients in whom Dacron prosthetic grafts had been placed (5 patients). In patients in whom abnormal platelet deposition was detected, the effect of administration of platelet-active drugs on platelet deposition was examined. Of the 18 patients with an aneurysm, 12 had equivocally positive studies on initial imaging and 2 had equivocally positive images. Of five patients with Dacron arterial grafts in place, four had diffuse platelet deposition in the grafts; the fifth patient had a platelet deposition only in a pseudoaneurysm. Eight patients with an abdominal aneurysm and positive or equivocally positive baseline images were restudied during platelet-active drug therapy either with aspirin plus dipyridamole (seven patients) or with sulfinpyrazone (four patients). No patient studied during treatment with aspirin plus dipyridamole had detectably decreased platelet deposition compared with baseline determinations. In contrast, two of four patients studied while receiving sulfinpyrazone showed decreased platelet deposition. Thus, platelet imaging may be of value for studying platelet physiology in vivo and for assessing platelet-active drugs and the thrombogenicity of prosthetic graft materials in human beings

Rapid thermally annealed plasma deposited SiNx:H thin films: Application to metal-insulator-semiconductor structures with Si, In0.53Ga0.47As, and InP

International Nuclear Information System (INIS)

Martil, I.; Prado, A. del; San Andres, E.; Gonzalez Diaz, G.; Martinez, F.L.

2003-01-01

We present in this article a comprehensive study of rapid thermal annealing (RTA) effects on the physical properties of SiN x :H thin films deposited by the electron cyclotron resonance plasma method. Films of different as-deposited compositions (defined in this article as the nitrogen to silicon ratio, x=N/Si) were analyzed: from Si-rich (x=0.97) to N-rich (x=1.6) films. The evolution of the composition, bonding configuration, and paramagnetic defects with the annealing temperature are explained by means of different network bond reactions that take place depending on the as-deposited film composition. All the analyzed films release hydrogen, while Si-rich and near-stoichiometric (x=1.43) ones also lose nitrogen upon annealing. These films were used to make Al/SiN x :H/semiconductor devices with Si, In 0.53 Ga 0.47 As, and InP. After RTA treatments, the electrical properties of the three different SiN x :H/semiconductor interfaces can be explained, noting the microstructural modifications that SiN x :H experiences upon annealing

Constraining the role of anoxygenic phototrophic Fe(II)-oxidizing bacteria in deposition of BIFs

Science.gov (United States)

Kappler, A.; Posth, N. R.; Hegler, F.; Wartha, E.; Huelin, S.

2007-12-01

Banded Iron Formations (BIFs) are Precambrian sedimentary deposits of alternating iron oxide and silica mineral layers. Their presence in the rock record ca.3.8-2.2 Ga makes them particularly intriguing formations for the debate over when oxygen became dominant on Earth. The mechanism(s) of BIF deposition is still unclear; suggestions including both abiotic and biotic processes. We are interested in constraining one of these proposed mechanisms; the direct biological oxidation of Fe(II) via anoxygenic Fe(II)-oxidizing autophototrophs. In order to find the limitations of photoferrotrophic BIF deposition, we take a holistic approach, investigating the oxidation of Fe(II) by modern Fe(II)-oxidizing phototrophs, the precipitation of Fe(III) (hydr)oxides, and the fate of the cell-mineral aggregates in the water column and at the basin floor. Specifically, physiology experiments with Fe(II)-oxidizing phototrophs under various conditions of light intensity, pH, Fe(II) concentration and temperature allow us to determine the environmental limits of such organisms. We carry out precipitation experiments to characterize the sedimentation rates, aggregate size and composition in order to resolve the effect of reactions in the water column. Finally, we simulate the diagenetic fate of these aggregates on the basin floor by placing them in gold capsules under T and P conditions relevant for the Transvaal Supergroup BIFs of South Africa. Recently, we have developed a tank simulating the Archean ocean in which the strains grow in continuous culture and collect the aggregates formed under various geochemical conditions. We aim to model the extent of and limitations to photoferrotrophs in BIF deposition. This information will help constrain whether biotic processes were dominant in the Archean ocean and will offer insight to the evolution of the early biogeosphere.

Places disponibles*/Places available **

CERN Multimedia

2003-01-01

Des places sont disponibles dans les cours suivants : Places are available in the following course : Java 2 Enterprise Edition - Part 2 : Enterprise JavaBeans : 20 - 22.1.03 (3 days) Introduction to PVSS : 27.1.03 (Afternoon) free course but registration necessary Basic PVSS : 28 - 30.1.03 (3 days) MAGNE-03 - Magnétisme pour l'électrotechnique : 28 - 30.1.03 (3 jours) MAGNE-03 - Magnetism for Technical Electronics : 11 - 13.2.03 (3 days) AutoCAD 2002 - niveau 1 : 24, 25.2 et 3, 4.3.03 (4 jours) AutoCAD 2002 - niveau 2 : 10 & 11.3.03 (2 jours) C++ for Particle Physicists : 10 - 14.3.03 (6 X 3 hour lectures) AutoCAD Mechanical 6 PowerPack (F) : 12, 13, 17, 18, 24 & 25.3.03 (6 jours) * Etant donné le délai d'impression du Bulletin, ces places peuvent ne plus être disponibles au moment de sa parution. Veuillez consulter notre site Web pour avoir la dernière mise à jour. ** The number of places available may vary. Please check our Web site to find out the current availability. Si vous désirez ...

Place Branding in Systems of Place

DEFF Research Database (Denmark)

Zenker, Sebastian; Andéhn, Mikael

2015-01-01

, this presents a challenge, since the role of a place in this system of geographical abstractions constitutes a piece of information more vital than any other in defining the place. Our understanding of places cannot be separated from their scale, and any effort at managing the reputation and meaning.......g. the European Union or Africa). Using the example of nation branding for Sudan and Slovenia, one can identify supranational places such as “sub-Saharan Africa” or “Eastern Europe”, carrying their own highly salient and often negative meaning in much of the Western world. We explore how association to a system...

Atomic Layer-Deposited TiO2 Coatings on NiTi Surface

Science.gov (United States)

Vokoun, D.; Racek, J.; Kadeřávek, L.; Kei, C. C.; Yu, Y. S.; Klimša, L.; Šittner, P.

2018-02-01

NiTi shape-memory alloys may release poisonous Ni ions at the alloys' surface. In an attempt to prepare a well-performing surface layer on an NiTi sample, the thermally grown TiO2 layer, which formed during the heat treatment of NiTi, was removed and replaced with a new TiO2 layer prepared using the atomic layer deposition (ALD) method. Using x-ray photoelectron spectroscopy, it was found that the ALD layer prepared at as low a temperature as 100 °C contained Ti in oxidation states + 4 and + 3. As for static corrosion properties of the ALD-coated NiTi samples, they further improved compared to those covered by thermally grown oxide. The corrosion rate of samples with thermally grown oxide was 1.05 × 10-5 mm/year, whereas the corrosion rate of the ALD-coated samples turned out to be about five times lower. However, cracking of the ALD coating occurred at about 1.5% strain during the superelastic mechanical loading in tension taking place via the propagation of a localized martensite band.

Mass Dependent Fractionation of Hg Isotopes in Source Rocks, Mineral Deposits and Spring Waters of the California Coast Ranges, USA

Science.gov (United States)

Smith, C. N.; Kesler, S. E.; Blum, J. D.; Rytuba, J. J.

2007-12-01

We present here the first study of the isotopic composition of Hg in rocks, ore deposits, and active hydrothermal systems from the California Coast Ranges, one of Earth's largest Hg-depositing systems. The Franciscan Complex and Great Valley Sequence, which form the bedrock in the California Coast Ranges, are intruded and overlain by Tertiary volcanic rocks including the Clear Lake Volcanic Sequence. These rocks contain two types of Hg deposits, hot-spring deposits that form at shallow depths (<300 m) and silica-carbonate deposits that extend to greater depths (200 to 1000 m), as well as active springs and geothermal systems that release Hg to the present surface. The Franciscan Complex and Great Valley Sequence contain clastic sedimentary rocks with higher concentrations of Hg than volcanic rocks of the Clear Lake Volcanic Field. Mean Hg isotope compositions for all three rock units are similar, although the range of values in Franciscan Complex rocks is greater than in either Great Valley or Clear Lake rocks. Hot spring and silica-carbonate Hg deposits have similar average isotopic compositions that are indistinguishable from averages for the three rock units, although δ202Hg values for the Hg deposits have a greater variance than the country rocks. Precipitates from dilute spring and saline thermal waters in the area have similarly large variance and a mean δ202Hg value that is significantly lower than the ore deposits and rocks. These observations indicate there is little or no isotopic fractionation during release of Hg from its source rocks into hydrothermal solutions. Isotopic fractionation does appear to take place during transport and concentration of Hg in deposits, especially in their uppermost parts. Boiling of hydrothermal fluids is likely the most important process causing of the observed Hg isotope fractionation. This should result in the release of Hg with low δ202Hg values into the atmosphere from the top of these hydrothermal systems and a

Age dating of sulfide deposits from axial and off-axial structures on the East Pacific Rise near 12050'N

International Nuclear Information System (INIS)

Lalou, C.; Brichet, E.; Hekinian, R.

1985-01-01

During several cruises (Clipperton, 1981; Cyatherm, 1982 and Geocyarise Leg 3, 1984), conducted between 12 0 40'N and 12 0 54'N on the East Pacific Rise, massive sulfide deposits have been dredged and recovered by the diving saucer ''Cyana''. These well localized and documented samples have been analyzed for their 210 Pb/Pb ratio and uranium series disequilibrium in view of dating the hydrothermal phenomenon. Using samples which are presently forming, the initial 210 Pb/Pb ratio has been established as 0.60+-0.06. Ten sulfide samples from the central graben (near 12 0 50'N) have ages less than about 10 years and are younger than most of the deposits found at 21 0 N on the East Pacific Rise. One sample from the eastern rim of the graben presents an age of about 150 years. Two off-axis structures with hydrothermal sulfide deposits were studied. The first is a semi-circular volcanic structure where low-temperature hydrothermal vents were observed at 500 m and 1000 m from the rise axis; sulfide samples collected from these sites yielded ages of about 2000 years. Further east, about 6 km from the rise axis, the second off-axis structure, called South Eastern (SE) Seamount presents thick inactive sulfide deposits as well as Mn-rich and nontronite deposits. An age around 20,000 years has been found for these deposits. These ages are discussed, and, taking into acount the asymmetrical structure of the ridge near 12 0 43'N, it is concluded that the formation of the SE Seamount occurred 20,000 years ago, on a basement of about 100,000 years old, accompanied by an extensive hydrothermal event. This indicates that an important eastward shift (4-5 km from the graben) of the volcano-hydrothermal activity took place in this area (12 0 43'N). (orig.)

The Chemistry of Inorganic Precursors during the Chemical Deposition of Films on Solid Surfaces.

Science.gov (United States)

Barry, Seán T; Teplyakov, Andrew V; Zaera, Francisco

2018-03-20

The deposition of thin solid films is central to many industrial applications, and chemical vapor deposition (CVD) methods are particularly useful for this task. For one, the isotropic nature of the adsorption of chemical species affords even coverages on surfaces with rough topographies, an increasingly common requirement in microelectronics. Furthermore, by splitting the overall film-depositing reactions into two or more complementary and self-limiting steps, as it is done in atomic layer depositions (ALD), film thicknesses can be controlled down to the sub-monolayer level. Thanks to the availability of a vast array of inorganic and metalorganic precursors, CVD and ALD are quite versatile and can be engineered to deposit virtually any type of solid material. On the negative side, the surface chemistry that takes place in these processes is often complex, and can include undesirable side reactions leading to the incorporation of impurities in the growing films. Appropriate precursors and deposition conditions need to be chosen to minimize these problems, and that requires a proper understanding of the underlying surface chemistry. The precursors for CVD and ALD are often designed and chosen based on their known thermal chemistry from inorganic chemistry studies, taking advantage of the vast knowledge developed in that field over the years. Although a good first approximation, however, this approach can lead to wrong choices, because the reactions of these precursors at gas-solid interfaces can be quite different from what is seen in solution. For one, solvents often aid in the displacement of ligands in metalorganic compounds, providing the right dielectric environment, temporarily coordinating to the metal, or facilitating multiple ligand-complex interactions to increase reaction probabilities; these options are not available in the gas-solid reactions associated with CVD and ALD. Moreover, solid surfaces act as unique "ligands", if these reactions are to be

A new approach for modeling dry deposition velocity of particles

Science.gov (United States)

Giardina, M.; Buffa, P.

2018-05-01

The dry deposition process is recognized as an important pathway among the various removal processes of pollutants in the atmosphere. In this field, there are several models reported in the literature useful to predict the dry deposition velocity of particles of different diameters but many of them are not capable of representing dry deposition phenomena for several categories of pollutants and deposition surfaces. Moreover, their applications is valid for specific conditions and if the data in that application meet all of the assumptions required of the data used to define the model. In this paper a new dry deposition velocity model based on an electrical analogy schema is proposed to overcome the above issues. The dry deposition velocity is evaluated by assuming that the resistances that affect the particle flux in the Quasi-Laminar Sub-layers can be combined to take into account local features of the mutual influence of inertial impact processes and the turbulent one. Comparisons with the experimental data from literature indicate that the proposed model allows to capture with good agreement the main dry deposition phenomena for the examined environmental conditions and deposition surfaces to be determined. The proposed approach could be easily implemented within atmospheric dispersion modeling codes and efficiently addressing different deposition surfaces for several particle pollution.

Energy deposition, heat flow, and rapid solidification during laser and electron beam irradiation of materials

Energy Technology Data Exchange (ETDEWEB)

White, C.W.; Aziz, M.J.

1985-10-01

The fundamentals of energy deposition, heat flow, and rapid solidification during energy deposition from lasers and electron beams is reviewed. Emphasis is placed on the deposition of energy from pulsed sources (10 to 100 ns pulse duration time) in order to achieve high heating and cooling rates (10/sup 8/ to 10/sup 10/ /sup 0/C/s) in the near surface region. The response of both metals and semiconductors to pulsed energy deposition is considered. Guidelines are presented for the choice of energy source, wavelength, and pulse duration time.

Modelling and analysis of CVD processes for ceramic membrane preparation

NARCIS (Netherlands)

Brinkman, H.W.; Cao, G.Z.; Meijerink, J.; de Vries, Karel Jan; Burggraaf, Anthonie

1993-01-01

A mathematical model is presented that describes the modified chemical vapour deposition (CVD) process (which takes place in advance of the electrochemical vapour deposition (EVD) process) to deposit ZrO2 inside porous media for the preparation and modification of ceramic membranes. The isobaric

Non-local energy deposition: A problem in regional RF hyperthermia

International Nuclear Information System (INIS)

Hagmann, M.J.; Levin, R.L.

1984-01-01

As the frequency is decreased below 1 GHz, RF applicators can cause deep heating of tissues. However, there is a concomitant problem in that significant energy deposition may occur well beyond the dimensions of the applicator. The BSD Medical Corporation has described to the authors tests with a phantom manequin in which SAR in the neck was significantly greater than that in the abdomen when an Annular Phased Array System (APAS) was positioned for abdominal heating. The authors have obtained numerical solutions for the SAR distribution in a 180-cell inhomogeneous block model of man subjected to r-f irradiation approximating that emanating from various applicators. The solutions agree with the reports of BSD that significant heating in the neck, inner thighs, and back will occur with an abdominally-placed APAS. They suggest that a similar problem will occur with a helical-coil or other applicator for which the electric field is predominantly parallel to the axis of the body. Typically, 70% or more of the total energy will be deposited outside the bounds of an axial applicator when it is placed around the chest or abdomen. The problem is most severe at frequencies for which body parts such as the arm or head may resonate. In such cases, over 90% of the energy may be deposited outside the bounds of applicator. The problem of non-local energy deposition appears to be substantially reduced for non-axial applicators. If the arm extends outward from the side of the body, an axial applicator around it will cause negligible energy deposition in the rest of the body

An Analysis of the Published Mineral Resource Estimates of the Haji-Gak Iron Deposit, Afghanistan

International Nuclear Information System (INIS)

Sutphin, David M.; Renaud, Karine M.; Drew, Lawrence J.

2011-01-01

The Haji-Gak iron deposit of eastern Bamyan Province, eastern Afghanistan, was studied extensively and resource calculations were made in the 1960s by Afghan and Russian geologists. Recalculation of the resource estimates verifies the original estimates for categories A (in-place resources known in detail), B (in-place resources known in moderate detail), and C 1 (in-place resources estimated on sparse data), totaling 110.8 Mt, or about 6% of the resources as being supportable for the methods used in the 1960s. C 2 (based on a loose exploration grid with little data) resources are based on one ore grade from one drill hole, and P 2 (prognosis) resources are based on field observations, field measurements, and an ore grade derived from averaging grades from three better sampled ore bodies. C 2 and P 2 resources are 1,659.1 Mt or about 94% of the total resources in the deposit. The vast P 2 resources have not been drilled or sampled to confirm their extent or quality. The purpose of this article is to independently evaluate the resources of the Haji-Gak iron deposit by using the available geologic and mineral resource information including geologic maps and cross sections, sampling data, and the analog-estimating techniques of the 1960s to determine the size and tenor of the deposit.

Carbon deposition at the bottom of gaps in TEXTOR experiments

International Nuclear Information System (INIS)

Matveev, D.; Kirschner, A.; Esser, H.G.; Freisinger, M.; Kreter, A.; Van Hoey, O.; Borodin, D.; Litnovsky, A.; Wienhold, P.; Coenen, J.W.; Stoschus, H.; Philipps, V.; Brezinsek, S.; Van Oost, G.

2013-01-01

Results of a new dedicated experiment addressing the problem of impurity deposition at the bottom in gaps are presented along with modelling. A test limiter with an isolated gap was exposed to the scrape-off layer plasma in TEXTOR. The exposure was accompanied by injection of 13 C-marked methane in the vicinity of the gap. Deposition at the bottom of the gap was monitored in situ with Quartz-Microbalance diagnostics. The 13 C deposition efficiency of about 2.6 × 10 −5 was measured. Post mortem analysis of resulting deposited layers performed with SIMS and EPMA techniques yields about a factor 2 smaller value corresponding to approximately 10% contribution of the gap bottom to the total 13 C deposition in the gap. This measured contribution is effectively much smaller than observed earlier in TEXTOR, taking the difference in geometry into account, and is in reasonable agreement with modelling performed with ERO and 3D-GAPS codes

Contemporary flowstone development links early hominin bearing cave deposits in South Africa

Science.gov (United States)

Pickering, Robyn; Kramers, Jan D.; Hancox, Philip John; de Ruiter, Darryl J.; Woodhead, Jon D.

2011-06-01

The Cradle of Humankind cave sites in South Africa preserve fossil evidence of four early hominin taxa: Australopithecus africanus, Australopithecus sediba, Paranthropus robustus and early Homo. In order to integrate this record into a pan-African scenario of human evolutionary history it is critical to have reliable dates and temporal ranges for the southern African hominins. In the past a lack of precise and accurate chronological data has prevented the evaluation of the temporal relationships between the various sites. Here we report new uranium-lead (U-Pb) radiometric ages obtained from sheets of calcium carbonate flowstone inter-bedded between clastic cave sediments at the site of Swartkrans, providing bracketing ages for the fossiliferous deposits. The fossil bearing units of Swartkrans, specifically the Hanging Remnant and Lower Bank of Member 1, are underlain by flowstone layers dated to 2.25 ± 0.05 Ma and 2.25 ± 0.08 Ma and capped by layers of 1.8 ± 0.01 Ma and 1.7 ± 0.07 Ma. The age bracket of the Member 1 deposits is therefore between 2.31 and 1.64 Ma. However, by combining the U-Pb with biostratigraphic data we suggest that this can be narrowed down to between 1.9 and 1.8 Ma. These data can be compared with other recently dated sites and a radiometrically dated U-Pb age sequence formed: Sterkfontein Member 4, Swartkrans Member 1, Malapa, and Cooper's D. From this new U-Pb dataset, a pattern of contemporary flowstone development emerges, with different caves recording the same flowstone-forming event. Specifically overlapping flowstone formation takes place at Swartkrans and Sterkfontein at ~ 2.29 Ma and ~ 1.77 Ma, and at Sterkfontein and Malapa at ˜ 2.02 Ma. This suggests a regional control over the nature and timing of speleothem development in cave deposits and these flowstone layers could assist in future correlation, both internal to specific deposits and regionally between sites.

Fog deposition to a Tillandsia carpet in the Atacama Desert

Science.gov (United States)

Westbeld, A.; Klemm, O.; Grießbaum, F.; Sträter, E.; Larrain, H.; Osses, P.; Cereceda, P.

2009-09-01

In the Atacama Desert, one of the driest places on earth, fog deposition plays an important role for the water balance and for the survival of vulnerable ecosystems. The eddy covariance method, previously applied for the quantification of fog deposition to forests in various parts of the world, was used for the first time to measure deposition of fog water to a desert. In this exploratory study we estimate the amount of water available for the ecosystem by deposition and determine the relevant processes driving fog deposition. This is especially important for the species Tillandsia landbecki living in coastal Atacama at the limit of plant existence with fog and dew being the only sources of water. Between 31 July and 19 August 2008 approximately 2.5 L m-2 of water were made available through deposition. Whole-year deposition was estimated as 25 L m-2. Turbulent upward fluxes occurred several times during the evenings and are explained by the formation of radiation fog. In connection with that, underestimates of the deposition are assumed. More detailed studies covering various seasons and all parameters and fluxes contributing to the local energy balance are suggested. This will help to further develop understanding about the processes of (i) deposition of water to the desert, and (ii) intensification of advection fog through additional formation of radiation fog.

Fog deposition to a Tillandsia carpet in the Atacama Desert

Energy Technology Data Exchange (ETDEWEB)

Westbeld, A.; Klemm, O.; Griessbaum, F.; Straeter, E. [Muenster Univ. (Germany). Inst. of Landscape Ecology; Larrain, H. [Pontificia Univ. Catolica de Chile (Chile). Atacama Desert Center ADC; Univ. Bolivariana, Iquique (Chile); Osses, P.; Cereceda, P. [Pontificia Univ. Catolica de Chile, Santiago de Chile (Chile). Inst. of Geography

2009-07-01

In the Atacama Desert, one of the driest places on earth, fog deposition plays an important role for the water balance and for the survival of vulnerable ecosystems. The eddy covariance method, previously applied for the quantification of fog deposition to forests in various parts of the world, was used for the first time to measure deposition of fog water to a desert. In this exploratory study we estimate the amount of water available for the ecosystem by deposition and determine the relevant processes driving fog deposition. This is especially important for the species Tillandsia landbecki living in coastal Atacama at the limit of plant existence with fog and dew being the only sources of water. Between 31 July and 19 August 2008 approximately 2.5 L m{sup -2} of water were made available through deposition. Whole-year deposition was estimated as 25 L m{sup -2}. Turbulent upward fluxes occurred several times during the evenings and are explained by the formation of radiation fog. In connection with that, underestimates of the deposition are assumed. More detailed studies covering various seasons and all parameters and fluxes contributing to the local energy balance are suggested. This will help to further develop understanding about the processes of (i) deposition of water to the desert, and (ii) intensification of advection fog through additional formation of radiation fog. (orig.)

Fog deposition to a Tillandsia carpet in the Atacama Desert

Directory of Open Access Journals (Sweden)

P. Osses

2009-09-01

Full Text Available In the Atacama Desert, one of the driest places on earth, fog deposition plays an important role for the water balance and for the survival of vulnerable ecosystems. The eddy covariance method, previously applied for the quantification of fog deposition to forests in various parts of the world, was used for the first time to measure deposition of fog water to a desert. In this exploratory study we estimate the amount of water available for the ecosystem by deposition and determine the relevant processes driving fog deposition. This is especially important for the species Tillandsia landbecki living in coastal Atacama at the limit of plant existence with fog and dew being the only sources of water. Between 31 July and 19 August 2008 approximately 2.5 L m−2 of water were made available through deposition. Whole-year deposition was estimated as 25 L m−2. Turbulent upward fluxes occurred several times during the evenings and are explained by the formation of radiation fog. In connection with that, underestimates of the deposition are assumed. More detailed studies covering various seasons and all parameters and fluxes contributing to the local energy balance are suggested. This will help to further develop understanding about the processes of (i deposition of water to the desert, and (ii intensification of advection fog through additional formation of radiation fog.

Mineralogical association in the zone of argillic advanced alteration in a kaolin deposit of Patagonia Argentina

International Nuclear Information System (INIS)

Rainoldi, A; Oviedo, P.; Maiza, P.; Marfil, S.

2010-01-01

This work is about the mineralogical and petrological relations of the para genetic association of advanced argillic zone in the kaolin deposit in Patagonia.This study allowed to establish the sequence of events that took place in the deposit as well as the conditions under which they were generated

Thrown Together: Incorporating Place and Sustainability into Early Literacy Education

Science.gov (United States)

Schmidt, Catarina

2017-01-01

The development of language and literacy abilities of young multilingual children is important to their future educational engagement and success in school. In this study, the value of taking account of place and sustainability in early literacy education is considered. This research provides ideas for practice-based research on early literacy in…

Teaching Kids with Learning Disabilities to Take Public Transit

Science.gov (United States)

Schoenfeld, Jane

2009-01-01

Taking public transit can make anyone nervous, especially in a large or medium-sized city where there are many different bus lines going many different places. The author's daughter, Anna, has multiple learning disabilities and may never learn to drive, but she wants to be as independent as possible so the author taught her to ride the bus. This…

Designated Places

Data.gov (United States)

California Natural Resource Agency — Census 2000 Place Names provides a seamless statewide GIS layer of places, including census designated places (CDP), consolidated cities, and incorporated places,...

Literary heritage and place building for communities: the case of Allier, France

Directory of Open Access Journals (Sweden)

Pierre-Mathieu Le Bel

2017-03-01

Full Text Available Literature’s geography takes an active part in the construction of a social and political space. In a postmodern context of increasing tourist offer and demand, literary tourism is often seen as a niche; an originality factor and a guaranty of authenticity by local development actors and visitors. The present article, consequently, is interested in this dialectic between places and literary heritage. This paper focuses on a participatory action research on citizen associations that promote literary heritage of the County of Allier, France. We look at how local associations build on literary heritage to produce places and representations of those places are aimed at tourist consumption.

Inventing and naming America:  Place and Place Names in Vladimir Nabokov’s Lolita

Directory of Open Access Journals (Sweden)

Monica Manolescu-Oancea

2009-06-01

Full Text Available In the afterword to Lolita, Nabokov claimed that in this book he had to invent both Lolita and America after having invented Europe in his previous fiction. This paper focuses precisely on the various ways in which Nabokov “invented” America in his best-known novel. This invention is first of all the result of the author’s evolving stance on the complexity of what he called “average ‘reality’” in his works. Through a survey of Nabokov’s statements on the choice and role of place in the forewords to his Russian works and in his critical texts, I show that Lolita is indeed considered by Nabokov to be a “recreation” of American reality, to a much greater extent than his Russian works had been recreations of a given milieu. I take the metaphor of the “crazy quilt” mentioned in Lolita to suggest complexity, chromatic exuberance, hybridity. The invention of America is also the result of a process of naming. Place names will be examined, not only those which make up Quilty’s “cryptogrammic paperchase”, but also Humbert’s choice of place names. The problem of referentiality is discussed and the way recent criticism has dealt with it. Finally, the interplay between one and many is emphasized, the way in which the diversity of the “crazy quilt” is counterbalanced by the uniqueness of the mastermind having produced it. The American motto “From many make one” could be reinterpreted as “From one make many”.

Energy deposition in a thin copper target downstream and off-axis of a proton-radiography target

International Nuclear Information System (INIS)

Greene, G.A.; Finfrock, C.C.; Snead, C.L.; Hanson, A.L.; Murray, M.M.

2002-01-01

A series of proton energy-deposition experiments was conducted to measure the energy deposited in a copper target located downstream and off-axis of a high-energy proton-radiography target. The proton/target interactions involved low-intensity bunches of protons at 24 GeV/c onto a spherical target consisting of concentric shells of tungsten and copper. The energy-deposition target was placed at five locations downstream of the proton-radiography target, off-axis of the primary beam transport, and was either unshielded or shielded by 5 or 10 cm of lead. Maximum temperature rises measured in the energy-deposition target due to single bunches of 5x10 10 protons on the proton-radiography target were approximately 20 mK per bunch. The data indicated that the scattered radiation was concentrated close to the primary transport axis of the beam line. The energy deposited in the energy-deposition target was reduced by moving the target radially away from the primary transport axis. Placing lead shielding in front of the target further reduced the energy deposition. The measured temperature rises of the energy-deposition target were empirically correlated with the distance from the source, the number of protons incident on the proton-radiography target, the thickness of the lead shielding, and the angle of the energy-deposition target off-axis of the beam line from the proton-radiography target. The correlation of the experimental data that was developed provides a starting point for the evaluation of the shielding requirements for devices downstream of proton-radiography targets such as superconducting magnets

Oxidation resistance of CrN/(Cr,V)N hard coatings deposited by DC magnetron sputtering

Energy Technology Data Exchange (ETDEWEB)

Panjan, P., E-mail: peter.panjan@ijs.si [Jožef Stefan Institute, Jamova 39, 1000 Ljubljana (Slovenia); Drnovšek, A.; Kovač, J.; Gselman, P. [Jožef Stefan Institute, Jamova 39, 1000 Ljubljana (Slovenia); Bončina, T. [University of Maribor, Faculty of Mechanical Engineering, Smetanova 17, 2000 Maribor (Slovenia); Paskvale, S.; Čekada, M.; Kek Merl, D.; Panjan, M. [Jožef Stefan Institute, Jamova 39, 1000 Ljubljana (Slovenia)

2015-09-30

In recent years vanadium-doped hard coatings have become available as possible candidates for self-lubrication at high temperatures. Their low coefficient of friction has mainly been attributed to the formation of the V{sub 2}O{sub 5} phase. However, the formation of vanadium oxides must be controlled by the out-diffusion of vanadium in order to achieve the combination of a low coefficient of friction and good mechanical properties for the protective coatings. In this work the application of a nanolayer of CrN/(Cr,V)N hard coating was proposed as a way to better control the out-diffusion of vanadium, while the topmost chromium oxide layer acts as barrier for the vanadium diffusion. However, the aim of this investigation was not only to focus on the formation of the oxide layer. Special attention was given to the oxidation process that takes place at the growth defects, where we observed a strong diffusion of vanadium taking place. The CrN/(Cr,V)N nanolayer coatings were deposited by DC unbalanced magnetron sputtering in an CC800/9 (CemeCon) industrial unit. The vanadium concentration in the (Cr,V)N layers was varied in the range 1.0–11.5 at.%. - Highlights: • Oxidation processes of CrN/(Cr,V)N nanolayers with vanadium content were investigated. • The CrN/(Cr,V)N hard layers were oxidized at high temperature in O2 atm. • The top chromium oxide layer acts as a diffusion barrier for vanadium ions during oxidation. • Important role of growth defects during the oxidation process is demonstrated.

Oxidation resistance of CrN/(Cr,V)N hard coatings deposited by DC magnetron sputtering

International Nuclear Information System (INIS)

Panjan, P.; Drnovšek, A.; Kovač, J.; Gselman, P.; Bončina, T.; Paskvale, S.; Čekada, M.; Kek Merl, D.; Panjan, M.

2015-01-01

In recent years vanadium-doped hard coatings have become available as possible candidates for self-lubrication at high temperatures. Their low coefficient of friction has mainly been attributed to the formation of the V_2O_5 phase. However, the formation of vanadium oxides must be controlled by the out-diffusion of vanadium in order to achieve the combination of a low coefficient of friction and good mechanical properties for the protective coatings. In this work the application of a nanolayer of CrN/(Cr,V)N hard coating was proposed as a way to better control the out-diffusion of vanadium, while the topmost chromium oxide layer acts as barrier for the vanadium diffusion. However, the aim of this investigation was not only to focus on the formation of the oxide layer. Special attention was given to the oxidation process that takes place at the growth defects, where we observed a strong diffusion of vanadium taking place. The CrN/(Cr,V)N nanolayer coatings were deposited by DC unbalanced magnetron sputtering in an CC800/9 (CemeCon) industrial unit. The vanadium concentration in the (Cr,V)N layers was varied in the range 1.0–11.5 at.%. - Highlights: • Oxidation processes of CrN/(Cr,V)N nanolayers with vanadium content were investigated. • The CrN/(Cr,V)N hard layers were oxidized at high temperature in O2 atm. • The top chromium oxide layer acts as a diffusion barrier for vanadium ions during oxidation. • Important role of growth defects during the oxidation process is demonstrated.

Superficial deposits in northeast flank of Sierras Australes (Provincia de Buenos Aires, Republica Argentina)

International Nuclear Information System (INIS)

Gentile, R.; Fucks, E.; De Francesco, F.

2004-01-01

Pleistocene and Holocene superficial deposits, which have been recognized in an area of 1500 km2 in the northeast flank of Sierras Australes, are characterized. In divide they are underlain by silts and siltstone which are called Sediments Pampeanas. There, a lower sequence, consisting mainly of aeolian sediments (loess) with scarce fluvial deposits and diamictons, was recognized. In some places an upper sequence that is product of aeolian and anthropogenic activity, was also recognized. In the valley sequences, the loess deposits can not only be underlain by fluvial sediments but can also overlain them. The more recent fluvial deposits which have eroded loess sequences are of the post conquest age [es

Deposition of cigarette smoke particles in the rat respiratory tract

International Nuclear Information System (INIS)

Chen, B.T.; Weber, R.E.; Yeh, H.C.; Lundgren, D.L.; Snipes, M.B.; Mauderly, J.L.

1988-01-01

Male and female rats were exposed to mainstream cigarette smoke to determine the fractional deposition. Deposition studies were conducted by placing the rats in plethysmography tubes for respiratory minute volume measurements and exposing them to 14 C-dotriacontane-labeled cigarette smoke at mass concentrations of 202 or 624 mg/m 3 for 25 min. Immediately after the exposure, the rats were sacrificed and the 14 C contents in various tissues and organs were analyzed. Results showed that the GI tract contained 16-31% of the total activity, indicating significant clearance from the large airways and nose to the GI tract during the exposure and during the 10-15 min between cessation of the exposure and the removal of the organs. Total deposition of the inhaled activity was 20.1 ± 1.6% for both exposure concentrations. The intrapulmonary deposition fractions (lung lobes plus airways below the lobar bronchi) were 12.4 ± 0.9% and 15.9 ± 1.4% for high and low concentrations, respectively, suggesting a slight enhancement in upper airway deposition for animals exposed to the higher smoke concentration. (author)

Deposition of cigarette smoke particles in the rat respiratory tract

Energy Technology Data Exchange (ETDEWEB)

Chen, B T; Weber, R E; Yeh, H C; Lundgren, D L; Snipes, M B; Mauderly, J L

1988-12-01

Male and female rats were exposed to mainstream cigarette smoke to determine the fractional deposition. Deposition studies were conducted by placing the rats in plethysmography tubes for respiratory minute volume measurements and exposing them to {sup 14}C-dotriacontane-labeled cigarette smoke at mass concentrations of 202 or 624 mg/m{sup 3} for 25 min. Immediately after the exposure, the rats were sacrificed and the 14{sub C} contents in various tissues and organs were analyzed. Results showed that the GI tract contained 16-31% of the total activity, indicating significant clearance from the large airways and nose to the GI tract during the exposure and during the 10-15 min between cessation of the exposure and the removal of the organs. Total deposition of the inhaled activity was 20.1 {+-} 1.6% for both exposure concentrations. The intrapulmonary deposition fractions (lung lobes plus airways below the lobar bronchi) were 12.4 {+-} 0.9% and 15.9 {+-} 1.4% for high and low concentrations, respectively, suggesting a slight enhancement in upper airway deposition for animals exposed to the higher smoke concentration. (author)

Offenders' risk-taking attitude inside and outside the prison walls.

Science.gov (United States)

Gummerum, Michaela; Hanoch, Yaniv; Rolison, Jonathan J

2014-10-01

It has long been assumed that risk taking is closely associated with criminal behavior. One reason for placing criminals behind bars--aside from punishment and protecting the public--is to prevent them from engaging in further risky criminal activities. Limited attention has been paid to whether being inside or outside prison affects offenders' risk-taking behaviors and attitudes. We compared risk-taking behaviors and attitudes in five risk domains (ethical, financial, health/safety, recreational, social) among 75 incarcerated offenders (i.e., offenders who are currently in prison) and 45 ex-offenders (i.e., offenders who have just been released from prison). Ex-offenders reported higher likelihood of engaging in risky behavior, driven largely by a willingness to take more risks in the recreational and ethical domains. Benefits attributed to risk taking as well as risk perception did not differ between incarcerated and ex-offenders, indicating that the opportunity to take risks might underlie behavioral risk intentions. Our results also indicate that risk-taking activities are better predicted by the expected benefits rather than by risk perception, aside from the health/safety domain. These results highlight the importance of studying the person and the environment and examining risk taking in a number of content domains. © 2014 Society for Risk Analysis.

Multivariate statistical monitoring as applied to clean-in-place (CIP) and steam-in-place (SIP) operations in biopharmaceutical manufacturing.

Science.gov (United States)

Roy, Kevin; Undey, Cenk; Mistretta, Thomas; Naugle, Gregory; Sodhi, Manbir

2014-01-01

Multivariate statistical process monitoring (MSPM) is becoming increasingly utilized to further enhance process monitoring in the biopharmaceutical industry. MSPM can play a critical role when there are many measurements and these measurements are highly correlated, as is typical for many biopharmaceutical operations. Specifically, for processes such as cleaning-in-place (CIP) and steaming-in-place (SIP, also known as sterilization-in-place), control systems typically oversee the execution of the cycles, and verification of the outcome is based on offline assays. These offline assays add to delays and corrective actions may require additional setup times. Moreover, this conventional approach does not take interactive effects of process variables into account and cycle optimization opportunities as well as salient trends in the process may be missed. Therefore, more proactive and holistic online continued verification approaches are desirable. This article demonstrates the application of real-time MSPM to processes such as CIP and SIP with industrial examples. The proposed approach has significant potential for facilitating enhanced continuous verification, improved process understanding, abnormal situation detection, and predictive monitoring, as applied to CIP and SIP operations. © 2014 American Institute of Chemical Engineers.

Spontaneous growth of whiskers from an interlayer of Mo sub 2 C beneath a diamond particle deposited in a combustion-flame

Energy Technology Data Exchange (ETDEWEB)

Okada, Katsuyuki; Komatsu, Shojiro; Ishigaki, Takamasa; Matsumoto, Seiichiro; Moriyoshi, Yusuke (National Inst. for Research in Inorganic Materials, Tsukuba, Ibaraki (Japan))

1992-02-01

When diamond particles deposited on a molybdenum substrate in a C{sub 2}H{sub -}O{sub 2} combustion-flame were kept for one year in the ambient atmosphere at room temperature, spontaneous whisker growth from an interlayer of Mo{sub 2}C beneath the diamond particles took place. The whiskers were clarified by electron probe micro-analysis (EPMA) and transmission electron microscopy (TEM) in a polycrystal composed of MoO{sub 2}, MoOC, and Mo{sub 2}C. The growth mechanism of them is discussed from two different points of view as follows: One is that the oxidation of an interlayer of Mo{sub 2}C beneath a diamond particle effectively reduces the surface free energy between the interlayer and diamond particle; consequently, the whisker can grow by using a screw dislocation. The other is that the internal stress existing between a diamond particle and an Mo{sub 2}C interlayer provides a very reactive zone where the growth of whisker takes place through the oxidation of Mo{sub 2}C. (orig.).

Sources of material for 'loess' deposits at 15°N in North Africa

Science.gov (United States)

McLaren, Sue; Smalley, Ian; O'Hara-Dhand, Ken

2014-05-01

Africa is not a loess-rich continent. Lacking are the large expanses of glacial terrain and the high cold mountain regions, which would have provided the material and processes for loess deposits. African geomorphology and climatic history did not favour the formation of major loess deposits. However, within the African setting there are situations which could lead to particle formation and loess deposition. Loess deposits are made from 'large' dust (i.e. particles around 30µm). Small dust (around 3µm) is generated in large amounts in Africa, and distributed over large distances. Large dust is not generated in significant amounts in Africa, and this accounts for the relative lack of loess deposits. It is a relative lack; examination of the map of loess distribution in the World by Scheidig 1934 (still the best world loess map) shows some possible loess in Africa. In particular there is a band across the continent at around 15°N. We propose some possible sources for this material, and fit these sources into a recently revised deterministic model of loess deposit formation. And look at some exotic but possible indicators of the loessic nature of the 15°N band. Three possible material sources are: (1). The Fonta-Djalon highlands to the west of the loess band, (2). The Bodélé Depression, towards the centre of the loess band, and (3). The Ethiopian highlands to the east. There is a convenient river associated with the loess band; the Niger rises in the Fonta-Djalon region and carries material through the loess zone. The catchment of the Niger is well placed to receive large dust material from the Bodélé depression. Most Bodélé material is small dust carried away in high suspension but small amounts of large dust could be transported to the Niger catchment. Material from the Ethiopian highlands makes up the Nile silt but again some could be transported to the west to contribute to the loess band- which is a modest loess deposit. The deposit can be examined with

Deposition of aluminium nanoparticles using dense plasma focus device

International Nuclear Information System (INIS)

Devi, Naorem Bilasini; Srivastava, M P; Roy, Savita

2010-01-01

Plasma route to nanofabrication has drawn much attention recently. The dense plasma focus (DPF) device is used for depositing aluminium nanoparticles on n-type Si (111) wafer. The plasma chamber is filled with argon gas and evacuated at a pressure of 80 Pa. The substrate is placed at distances 4.0 cm, 5.0 cm and 6.0 cm from the top of the central anode. The aluminium is deposited on Si wafer at room temperature with two focused DPF shots. The deposits on the substrate are examined for their morphological properties using atomic force microscopy (AFM). The AFM images have shown the formation of aluminium nanoparticles. From the AFM images, it is found that the size of aluminium nanoparticles increases with increase in distance between the top of anode and the substrate for same number of DPF shots.

Place, Non-Place, Multi-Place and the (Non)Possibilities of Identity: Philosophical, Social, and Communicational Aspects

OpenAIRE

Basia Nikiforova

2016-01-01

Michel Foucault in the text “Of Other Spaces: Utopias and Heterotopias” wrote that “the present epoch will perhaps be above all the epoch of space”. Space, place, and territories are social productions. Territory is a polysemic concept. Place is “events” created by territories, fluid areas of control produced by territorial negotiation (horizontal dynamics) and negotiations between places (vertical dynamics). Space produces places and is produced by places. Moreover, space, place and territor...

Post-utilitarian forestry: What's place got to do with it?

Science.gov (United States)

Daniel R. Williams

2002-01-01

Place ideas take a more holistic and embedded view of socio-ecological reality and have begun to influence many aspects of resource management, from ecosystem management to community-based collaboration. The flux we might call post-utilitarian forestry can be understood as a renegotiation of a long-standing dialectic tension in Western thought between universalist and...

Erosion and deposition in a field/forest system estimated using cesium-137 activity

International Nuclear Information System (INIS)

Lowrance, R.; McIntyre, S.; Lance, C.

1988-01-01

Soil erosion and deposition were estimated using Cs-137 activity within a 7.25-ha field/forest system in the southeastern coastal plain. Sol eroded from the field was deposited both in the riparian forest ecosystem and in downslope areas of the field. Total activity, depth to peak activity, and depth to zero activity increased downslope from field to stream. Erosion and deposition rates, estimated by changes in activity per unit area from a reference undisturbed forest site, showed that about twice as much total deposition had taken place as total erosion. Excess deposition was attributed to deposition from the upstream portions of the watershed. Erosion and deposition rates estimated with this method were about 63 and 256 Mg/ha/yr, respectively. Erosion and deposition rates estimated by two different calculation techniques were nearly identical. These rates were considerably higher than rates estimated in an earlier study. The rates may be overestimated because the differential rates of Cs-137 movement on clay particles were not considered. The riparian ecosystem acted as a very efficient sediment trap. 19 refs., 5 figs., 3 tabs

Diagenetic Changes in Common Hot Spring Microfacies

Science.gov (United States)

Hinman, N. W.; Kendall, T. A.; MacKenzie, L. A.; Cady, S. D.

2016-05-01

The friable nature of silica hot spring deposits makes them susceptible to mechanical weathering. Rapid diagenesis must take place for these rocks to persist in the geologic record. The properties of two microfacies at two deposits were compared.

Upcoming training sessions (up to end October) - Places available

CERN Multimedia

2016-01-01

Please find below a list of training sessions scheduled to take place up to the end of October with places available.   Safety and Language courses are not included here, you will find an up-to-date list in the Training Catalogue. If you need a course which is not featured  in the catalogue, please contact one of the following: your supervisor, your Departmental Training Officer or the relevant learning specialist. Leadership Training           Training Course Title Next Session Language Duration Available places Needed to maintain the session Driving for Impact and Influence 13-Sep-2016 to 14-Sep-2016 French 2 days 4 0 Essentials of People Management for CERN Supervisors (Adapted from CDP for CERN Supervisors) 22-Sep-2016 to 23-Sep-2016, 18-Nov-2016, 17-Jan-2017 to 18-Jan-2017 English 5 days 5 0 Eléments essentiels de la gestion du personnel pour les superviseurs (adapt&a...

RESEARCH OF COMPETITION IN DEPOSIT MARKET OF UKRAINE BASED ON THE PANZAR-ROSSE MODEL

Directory of Open Access Journals (Sweden)

Iryna Didenko

2016-11-01

Full Text Available The problem in an adequate assessment of the level of competition in the banking market has prompted researchers to search constantly some new methods. The most famous of them were later successfully adapted to the banking market, are a models of Bresnahan, Panzar-Rosse, Bertrand, Iwat, Monti-Klein-Modesto Barros and others. In Ukraine, the process of assessing the level of competition in the banking sector is very relevant, in line with the recent reforms of particular relevance and distribution. Regarding the domestic deposit market, there is a shortage of qualitative analysis of this issue, unlike foreign practice. Therefore this study we try to solve this problem. The key goal of researchers in this study is in a detailed analysis to identify the important factors which make influence on the allocated markets, in particular on lending and deposit rates. Based on these factors there could be implemented internal adjustment processes taking place in the markets. The purpose of the article is to determine the level of competition in the deposit market of Ukraine in 2006-2015 basing on nonstructural Panzar- Rosse model and identify key factors that affect this level. Methodology. To research the level of competition in the deposit market of Ukraine the Panzar-Rosse model was used, in which separate 11 models were built using the integrated tool “Multiple regression” in the software package of statistics analysis STATISTICA. The input data in the model was presented with the information on financial performance of Ukrainian banks during ten years from 01.01.2005 till 01.01.2015. Results of this research showed that in Ukrainian deposit market there is a monopolistic competition, as proved by the calculated values of H-statistics index. The year of 2008, in the context of the global economic crisis, was marked as an unbalanced period for deposit market of Ukraine. Practical implications. Knowing the current state of competition level in the

What does it take to make them stay? : how place satisfaction relates to willingness to stay of the creative class

OpenAIRE

Annell, Jonas; Terman, Felix

2017-01-01

Swedish students in smaller university host cities leave in favor of more attractive places after having completed their studies. Failing to retain newly graduated students is a problem for university host cities as educated people are associated with the group referred to as the creative class. Members of the creative class are drivers of regional economic growth, and have historically proven to be important for creating and developing the well-being of cities. Different place attributes hav...

REMINDER: Alcohol and the work place

CERN Multimedia

2004-01-01

The CERN Medical Service has observed an increase in the number of personnel suffering from alcohol-related problems in recent years, in spite of the implementation of stricter regulations concerning the consumption of alcohol on the site. The causes of alcohol-related problems are often complex and many-faceted. A family history of alcohol abuse can be a cofactor in excessive drinking. The effects on a person's work are not negligible and should not be ignored. "Alcohol and the work place" is the third part of a campaign designed to raise awareness of the risks of alcohol consumption, which has already dealt with "alcohol and health" and "alcohol and road safety". Our campaign this year will be rounded off by three information sessions in which a representative of the ISPA (Swiss Institute for the Prevention of Alcoholism) will participate. The last of these sessions will take place in: the Main Building Auditorium on Wednesday, 8 December 2004 from 14:00 to 15:30. Sessions are open to everyone. For m...

Reactivity and morphology of vapor-deposited Al/polymer interfaces for organic semiconductor devices

International Nuclear Information System (INIS)

Demirkan, K.; Mathew, A.; Weiland, C.; Opila, R. L.; Reid, M.

2008-01-01

The chemistry and the morphology of metal-deposited organic semiconductor interfaces play a significant role in determining the performance and reliability of organic semiconductor devices. We investigated the aluminum metallization of poly(2-methoxy-5,2 ' -ethyl-hexyloxy-phenylene vinylene) (MEH-PPV), polystyrene, and ozone-treated polystyrene surfaces by chemical (x-ray and ultraviolet photoelectron spectroscopy) and microscopic [atomic force microscopy, scanning electron microscopy (SEM), focused ion beam (FIB)] analyses. Photoelectron spectroscopy showed the degree of chemical interaction between Al and each polymer; for MEH-PPV, the chemical interactions were mainly through the C-O present in the side chain of the polymer structure. The chemical interaction of aluminum with polystyrene was less significant, but it showed a dramatic increase after ozone treatment of the polystyrene surface (due to the formation of exposed oxygen sites). Results showed a strong relationship between the surface reactivity and the condensation/sticking of the aluminum atoms on the surface. SEM analysis showed that, during the initial stages of the metallization, a significant clustering of aluminum takes place. FIB analysis showed that such clustering yields a notably porous structure. The chemical and the morphological properties of the vapor-deposited Al on organic semiconductor surfaces makes such electrical contacts more complicated. The possible effects of surface chemistry and interface morphology on the electrical properties and reliability of organic semiconductor devices are discussed in light of the experimental findings

Oh, the Places They Went: SBOs Share Their Career Paths

Science.gov (United States)

George, Patricia

2013-01-01

"Oh the Places You'll Go!" That Dr. Seuss book is a standard gift for graduates as they are sent out into the world-whether it's off to college or into the world of work. "You can steer yourself any direction you choose." What direction did school business officials take to get where they are today? The most recent…

The Rhythm of Non-Places: Marooning the Embodied Self in Depthless Space

Directory of Open Access Journals (Sweden)

Les Roberts

2015-10-01

Full Text Available Taking as its starting point the spatiotemporal rhythms of landscapes of hyper-mobility and transit, this paper explores how the process of “marooning” the self in a radically placeless (and depthless space—in this instance a motorway traffic island on the M53 in the northwest of England—can inform critical understandings and practices of “deep mapping”. Conceived of as an autoethnographic experiment—a performative expression of “islandness” as an embodied spatial praxis—the research on which this paper draws revisits ideas set out in JG Ballard’s 1974 novel Concrete Island, although, unlike Ballard’s island Crusoe (and sans person Friday, the author’s residency was restricted to one day and night. The fieldwork, which combines methods of “digital capture” (audio soundscapes, video, stills photography, and GPS tracking, takes the form of a rhythmanalytical mapping of territory that can unequivocally be defined as “negative space”. Offering an oblique engagement with debates on “non-places” and spaces of mobility, the paper examines the capacity of non-places/negative spaces to play host to the conditions whereby affects of place and dwelling can be harnessed and performatively transacted. The embodied rhythmicity of non-places is thus interrogated from the vantage point of a constitutive negation of the negation of place. In this vein, the paper offers a reflexive examination of the spatial anthropology of negative space.

Convection and chemistry effects in CVD: A 3-D analysis for silicon deposition

Science.gov (United States)

Gokoglu, S. A.; Kuczmarski, M. A.; Tsui, P.; Chait, A.

1989-01-01

The computational fluid dynamics code FLUENT has been adopted to simulate the entire rectangular-channel-like (3-D) geometry of an experimental CVD reactor designed for Si deposition. The code incorporated the effects of both homogeneous (gas phase) and heterogeneous (surface) chemistry with finite reaction rates of important species existing in silane dissociation. The experiments were designed to elucidate the effects of gravitationally-induced buoyancy-driven convection flows on the quality of the grown Si films. This goal is accomplished by contrasting the results obtained from a carrier gas mixture of H2/Ar with the ones obtained from the same molar mixture ratio of H2/He, without any accompanying change in the chemistry. Computationally, these cases are simulated in the terrestrial gravitational field and in the absence of gravity. The numerical results compare favorably with experiments. Powerful computational tools provide invaluable insights into the complex physicochemical phenomena taking place in CVD reactors. Such information is essential for the improved design and optimization of future CVD reactors.

9 CFR 300.6 - Access to establishments and other places of business.

Science.gov (United States)

2010-01-01

... establishments and other places of business. (a) General. Upon presentation of credentials— (1) Persons subject... such an establishment and its premises. (2) At all ordinary business hours, upon presentation of... this chapter and, upon payment of the fair market value therefor, take reasonable samples of the...

Embodied Experiences of Place: A Study of History Learning with Mobile Technologies

Science.gov (United States)

Price, S.; Jewitt, C.; Sakr, M.

2016-01-01

This paper reports an empirical study that takes a multimodal analytical approach to examine how mobile technologies shape students' exploration and experience of place during a history learning activity in situ. In history education, mobile technologies provide opportunities for authentic experiential learning activities that have the potential…

ECOSYS-87: Model calculations of the activity in cattle meat related to deposition time and feeding regimes after a nuclear fallout

International Nuclear Information System (INIS)

Riesen, T.K.; Gottofrey, J.; Heiz, H.J.; Schenker-Wicki, A.

1996-01-01

The radioecological model ECOSYS087 was used to evaluate the effect of countermeasures for reducing the ingestion dose by eating cattle meat after an accidental release of radioactive material. Calculations were performed using a database adapted to Swiss conditions for the case that (1) contaminated grass or hay is replaced by clean fodder; (2) the last 100 days before slaughter, taking place one year after an accident, only uncontaminated fodder is given; and (3) alternative feeding regimes are chosen. Seasonal effects were considered by doing all calculations for a deposition at each month of the year. Feeding uncontaminated forage 100 d before slaughter (case 2) proved to be the most effective countermeasure and reduced the integrated activity in meat by 90% to 99%. The effect of replacing contaminated grass (case 1) was less uniform and depended strongly on the time a deposition occurred. In this case the reduction was between 50% and 100% one year after deposition. The substitution of contaminated hay (case 1) was less effective compared to the substitution of grass. The choice of alternative feeding regimes (case 1) was less effective compared to the substitution of grass. The choice of alternative feeding regimes (case 3) led to a reduction of the integrated activity of up to 40% one year after deposition. The present model calculations clearly reveal the importance of the seasonality and demonstrate the usefulness of such calculations as a basis for generating countermeasures in decision support systems. 8 refs., 1 fig., 5 tabs

The Concept of Place and Sense of Place In Architectural Studies

OpenAIRE

Mina Najafi; Mustafa Kamal Bin Mohd Shariff

2011-01-01

Place is a where dimension formed by people-s relationship with physical settings, individual and group activities, and meanings. 'Place Attachment', 'Place Identity'and 'Sense of Place' are some concepts that could describe the quality of people-s relationships with a place. The concept of Sense of place is used in studying human-place bonding, attachment and place meaning. Sense of Place usually is defined as an overarching impression encompassing the general ways in wh...

Microstructural development in physical vapour-deposited partially stabilized zirconia thermal barrier coatings

Energy Technology Data Exchange (ETDEWEB)

Sohn, Y. H. (Center for Intelligent Processing of Materials, Worcester Polytechnic Institute, 100 Institute Road, Worcester, MA 01609-2280 (United States)); Biederman, R.R. (Center for Intelligent Processing of Materials, Worcester Polytechnic Institute, 100 Institute Road, Worcester, MA 01609-2280 (United States)); Sisson, R.D. Jr. (Center for Intelligent Processing of Materials, Worcester Polytechnic Institute, 100 Institute Road, Worcester, MA 01609-2280 (United States))

1994-10-01

The effects of processing parameters of physical vapour deposition on the microstructure of partially stabilized zirconia (PSZ) thermal barrier coatings have been experimentally investigated. Emphasis has been placed on the crystallographic texture of the PSZ coatings and the microstructure of the top surface of the PSZ coatings as well as the metal-ceramic interface. The variations in the deposition chamber temperature, substrate thickness, substrate rotation and vapour incidence angle resulted in the observation of significant differences in the crystallographic texture and microstructure of the PSZ coatings. ((orig.))

Early effects of water inflow into a deposition hole. Laboratory tests results

International Nuclear Information System (INIS)

Sanden, Torbjoern; Boergesson, Lennart

2010-12-01

material continuously measured. The results from all tests were well within the limits of the erosion model. The erosion rate was in all tests in the lower range of the model which probably depends on the fact that the tests were performed in vertical direction with upwards flow. An interesting result from the tests (Test type 1) was that the buffer blocks moved upwards when water was filled into the surrounding pellets, but the movements did not seem to depend on swelling of the blocks. Instead the heave seemed to depend on a high relative humidity in the pellets filling which made the blocks crack and by that cause an upwards movement. The long term test verified that the decrease of the erosion rate with time that have been measured in earlier tests and is predicted in the model seemed to continue for long time and for large water volumes. With the performed laboratory tests as basis, analysis of the processes related to water inflow into a deposition hole have been made. The processes may lead to unacceptable reduction in buffer density during the installation and water saturation phases. There are mainly two processes that may be detrimental to the buffer. One of them occurs during installation before the backfill has been placed on top of the deposition hole. The inflowing water will cause a heave of the buffer blocks, which may cause unacceptably decrease in density of the buffer material around the canister. The other process is erosion that will take place when water flows out from the deposition hole into the tunnel in channels formed in the pellets filling. The criterion for acceptable heave of the buffer blocks before installation of backfill on top of the deposition hole is suggested to be one cm and the maximum allowable water inflow rate that causes such a heave within four days was found to be 0.1 l/min. The criterion for acceptable loss of bentonite in one spot in a deposition hole is suggested to be 100 kg. The allowable inflow rate that limits the amount

Early effects of water inflow into a deposition hole. Laboratory tests results

Energy Technology Data Exchange (ETDEWEB)

Sanden, Torbjoern; Boergesson, Lennart (Clay Technology AB, Lund (Sweden))

2010-12-15

material continuously measured. The results from all tests were well within the limits of the erosion model. The erosion rate was in all tests in the lower range of the model which probably depends on the fact that the tests were performed in vertical direction with upwards flow. An interesting result from the tests (Test type 1) was that the buffer blocks moved upwards when water was filled into the surrounding pellets, but the movements did not seem to depend on swelling of the blocks. Instead the heave seemed to depend on a high relative humidity in the pellets filling which made the blocks crack and by that cause an upwards movement. The long term test verified that the decrease of the erosion rate with time that have been measured in earlier tests and is predicted in the model seemed to continue for long time and for large water volumes. With the performed laboratory tests as basis, analysis of the processes related to water inflow into a deposition hole have been made. The processes may lead to unacceptable reduction in buffer density during the installation and water saturation phases. There are mainly two processes that may be detrimental to the buffer. One of them occurs during installation before the backfill has been placed on top of the deposition hole. The inflowing water will cause a heave of the buffer blocks, which may cause unacceptably decrease in density of the buffer material around the canister. The other process is erosion that will take place when water flows out from the deposition hole into the tunnel in channels formed in the pellets filling. The criterion for acceptable heave of the buffer blocks before installation of backfill on top of the deposition hole is suggested to be one cm and the maximum allowable water inflow rate that causes such a heave within four days was found to be 0.1 l/min. The criterion for acceptable loss of bentonite in one spot in a deposition hole is suggested to be 100 kg. The allowable inflow rate that limits the amount

Financial products as alternatives to traditional deposits

Directory of Open Access Journals (Sweden)

Cristina Lidia MANEA

2016-05-01

In this context, increasing the safety of depositors appears as an undisputed necessity, which translates to our approach in the development of a constructive type applied research that takes into account the following stages: short description of risks and uncertainties characterizing the economic environment with emphasis on the importance of the financial instruments; analysis of empirical data on deposits in lei and euro at national level, identifying possible causes which led to one preference or another and finding the causes underlying the different options manifested in the capital, as compared to other counties; identifying the products that offer a dangerous alternative to traditional deposits from the Romanian banking market and describing these products and their related risks; the proposal of a new product, demonstrating its effectiveness by testing and confirmation of two hypotheses.

Plastic cells for energy from the sun (PLACES)

Energy Technology Data Exchange (ETDEWEB)

Halls, J.; Wilson, R.

2004-07-01

This research report (130 pages) carried out as the PLACES (Plastic Cells for Energy from the Sun) project describes the substantial progress made in understanding polymer PV devices. In particular, several promising new materials have been developed and techniques to optimise absorption in the active layer are described. The deposition studies on substrates other than glass have shown the feasibility of producing flexible, large-area PV devices. Several developments with materials, devices and processes have, or are, to be patented. It is pointed out that the stability and lifetime of these polymer PV devices need to be assessed in advance of any commercial application. The study was carried out by CDT Ltd and supported by the DTI.

Deposition of fine and ultrafine particles on indoor surface materials

DEFF Research Database (Denmark)

Afshari, Alireza; Reinhold, Claus

2008-01-01

-scale test chamber. Experiments took place in a 32 m3 chamber with walls and ceiling made of glass. Prior to each experiment the chamber was flushed with outdoor air to reach an initial particle concentration typical of indoor air in buildings with natural ventilation. The decay of particle concentrations...... The aim of this study was the experimental determination of particle deposition for both different particle size fractions and different indoor surface materials. The selected surface materials were glass, gypsum board, carpet, and curtain. These materials were tested vertically in a full...... was monitored. Seven particle size fractions were studied. These comprised ultrafine and fine particles. Deposition was higher on carpet and curtain than on glass and gypsum board. Particles ranging from 0.3 to 0.5 µm had the lowest deposition. This fraction also has the highest penetration and its indoor...

Place attachment, place identity and aesthetic appraisal of urban landscape

Directory of Open Access Journals (Sweden)

Jaśkiewicz Michał

2015-12-01

Full Text Available As the aesthetic of the Polish cities became a topic of wider discussions, it is important to detect the potential role of human-place relations. Two studies (N = 185 & N = 196 were conducted to explore the relationship between place attachment, place identity and appraisal of urban landscape. Satisfaction with urban aesthetic was predicted by two dimensions of place attachment (place inherited and place discovered, local identity (on the trend level and national-conservative identity. Place discovered and European identity were also predictors of visual pollution sensitivity. Place discovered is considered as more active type of attachment that permits both a positive bias concerning the aesthetics of one’s city, and a stronger criticism of the elements that can potentially violate the place’s landscape.

DEPOSIT INSURANCE SYSTEM: AN EXPOSITION FOR THE ISLAMIC BANKS IN MALAYSIA

OpenAIRE

Abdullah, Sharifah Adlina Syed; Ahmad, Rubi

2012-01-01

An important aspect of the new financial landscape is the increased focus on financial stability. A deposit insurance (DI) system accomplishes this purpose. While there are a great number of earlier studies that analyze the impact of DI on the conventional banking system, there is a lack of study that takes into account the moral hazard problem of DI on the Islamic banking system. Our paper aims to investigate the moral hazard implication by way of bank risk taking trailing the introduc...

Scalable control program for multiprecursor flow-type atomic layer deposition system

Energy Technology Data Exchange (ETDEWEB)

Selvaraj, Sathees Kannan [Department of Chemical Engineering, University of Illinois at Chicago, Chicago, Illinois 60607 (United States); Takoudis, Christos G., E-mail: takoudis@uic.edu [Department of Chemical Engineering, University of Illinois at Chicago, Chicago, Illinois 60607 and Department of Bioengineering, University of Illinois at Chicago, Chicago, Illinois 60607 (United States)

2015-01-01

The authors report the development and implementation of a scalable control program to control flow type atomic layer deposition (ALD) reactor with multiple precursor delivery lines. The program logic is written and tested in LABVIEW environment to control ALD reactor with four precursor delivery lines to deposit up to four layers of different materials in cyclic manner. The programming logic is conceived such that to facilitate scale up for depositing more layers with multiple precursors and scale down for using single layer with any one precursor in the ALD reactor. The program takes precursor and oxidizer exposure and purging times as input and controls the sequential opening and closing of the valves to facilitate the complex ALD process in cyclic manner. The program could be used to deposit materials from any single line or in tandem with other lines in any combination and in any sequence.

Place, Non-Place, Multi-Place and the (NonPossibilities of Identity: Philosophical, Social, and Communicational Aspects

Directory of Open Access Journals (Sweden)

Basia Nikiforova

2016-09-01

Full Text Available Michel Foucault in the text “Of Other Spaces: Utopias and Heterotopias” wrote that “the present epoch will perhaps be above all the epoch of space”. Space, place, and territories are social productions. Territory is a polysemic concept. Place is “events” created by territories, fluid areas of control produced by territorial negotiation (horizontal dynamics and negotiations between places (vertical dynamics. Space produces places and is produced by places. Moreover, space, place and territories can be seen as the waves of territorialization and deterritorialization in an endless process. It is a form of seizure in the world, an a priori for Immanuel Kant, an ontological need for Martin Heidegger. Territory is a space, governed by a set of rules, named “code”. Territorialization is then synonymous of a certain codification, or the symbolical organization of space. Places are created by territorializational dynamics. They are the sum of “events”. The place and its territory is not “natural”, but it is a cultural artifact, a social product linked to desire, power and identity. The changes of the functions of places (what Foucault called heterotopy are an important subject of contemporary studies. There are also many new temporary uses of these spaces and different emerging functions, including new forms of control, access, surveillance, new forms of openness and closeness (passwords, access profiles, etc.. Informational territory creates new heterotopias, new functions for places and a redefinition of social and communicational practices. It is not the end of a concrete place and its territory, but rather, a new meaning, sense, and a function for these spaces. The contemporary meaning of place and space has a visible tendency in creating ambivalence of sacrum and profanum, which means the secularization of the sacred and the sacralization of the secular. One of the sides of this tendency is sacralizing market and marketing

ONLINE SCAMS: TAKING THE FUN OUT OF THE INTERNET

OpenAIRE

Pradeep Kumar Puram; Mukesh Kaparthi; Aditya Krishna Haas Rayaprolu

2011-01-01

The fun of using the Internet has become sour due to the various scams taking place day in and day out, all around the world. Internet users are being trapped around every corner and their credit card information is being siphoned, all due to the presence of these online scams. This paper looks in depth into a few of these scams, and explores a solution to counter this menace.

Place Branding

DEFF Research Database (Denmark)

Medway, Dominic; Swanson, Kathryn; Neirotti, Lisa Delpy

2015-01-01

Purpose: – The purpose of this paper is to report on a special session entitled “Place branding: Are we wasting our time?”, held at the American Marketing Association’s Summer Marketing Educators’ conference in 2014. Design/methodology/approach: – The report details the outcome of an Oxford......: – The outcome of the debate points towards a need for place brands to develop as more inclusive and organic entities, in which case it may be best for place practitioners to avoid creating and imposing a place brand and instead help shape it from the views of stakeholder constituencies. This shifts the notion...... of place branding towards an activity centred on “curation”. Originality/value: – The use of a competitive debating format as a means for exploring academic ideas and concepts in the place management field....

Naturalness and Place in River Rehabilitation

Directory of Open Access Journals (Sweden)

Kirstie Fryirs

2009-06-01

Full Text Available An authentic approach to river rehabilitation emphasizes concerns for the natural values of a given place. As landscape considerations fashion the physical template upon which biotic associations take place, various geomorphic issues must be addressed in framing rehabilitation activities that strive to improve river health. An open-ended approach to river classification promotes applications that appreciate the values of a given river, rather than pigeonholing reality. As the geomorphic structure of some rivers is naturally simple, promoting heterogeneity as a basis for management may not always be appropriate. Efforts to protect unique attributes of river systems must be balanced with procedures that look after common features. Concerns for ecosystem functionality must relate to the behavioral regime of a given river, remembering that some rivers are inherently sensitive to disturbance. Responses to human disturbance must be viewed in relation to natural variability, recognizing how spatial relationships in a catchment, and responses to past disturbances, fashion the operation of contemporary fluxes. These fluxes, in turn, influence what is achievable in the rehabilitation of a given reach. Given the inherently adjusting and evolutionary nature of river systems, notional endpoints do not provide an appropriate basis upon which to promote concepts of naturalness and place in the rehabilitation process. These themes are drawn together to promote rehabilitation practices that relate to the natural values of each river system, in preference to applications of "cookbook" measures that build upon textbook geomorphology.

Structure and texture of uranium ores in exogenous deposits

International Nuclear Information System (INIS)

Danchev, V.I.

1977-01-01

Structure and texture signs of uranium rock exogenous deposits have been systematized for the first time, taking into account the slaging of the ore-formation process, connected with formation and change of containing sedimentary rocks, starting with the sedimentogenesis stage and early sediment diagenesis and their subsequent transformation in katagenesis and metamorphism processes. The main features of uranium geochemistry in the exogenous process are considered. Suggested is the genetic classification of uranium exogenous deposits in rocks of sedimentary cover, made with respect to conjugation and various ore-forming productivity of the litogenesis stage. Described are the main combinations of various rock texture and structure properties, characteristic of deposits of genetic classes and groups of the above classification. Eight most frequently occuring textures (lamellar, concretion, oolitic, coagulate, crack, mixed and impregnated) and their types are described and illustrated. Materials of soviet and foreign authors have been used to compile the atlas

Stereotypes and the Achievement Gap: Stereotype Threat Prior to Test Taking

Science.gov (United States)

Appel, Markus; Kronberger, Nicole

2012-01-01

Stereotype threat is known as a situational predicament that prevents members of negatively stereotyped groups to perform up to their full ability. This review shows that the detrimental influence of stereotype threat goes beyond test taking: It impairs stereotyped students to build abilities in the first place. Guided by current theory on…

The study on microb and organic metallogenetic process of the interlayer oxidized zone uranium deposit. A case study of the Shihongtan uranium deposit in Turpan-Hami basin

International Nuclear Information System (INIS)

Qiao Haiming; Shang Gaofeng

2010-01-01

Microbial and organic process internationally leads the field in the study of metallogenetic process presently. Focusing on Shi Hongtan uranium deposit, a typical interlayer oxidized zone sandstone-type deposit, this paper analyzes the geochemical characteristics of microb and organic matter in the deposit, and explores the interaction of microb and organic matter. It considers that the anaerobic bacterium actively takes part in the formation of the interlayer oxidized zone, as well as the mobilization and migration of uranium. In the redox (oxidation-reduction) transition zone, sulphate-reducing bacteria reduced sulphate to stink damp, lowing Eh and acidifying pH in the groundwater, which leads to reducing and absorbing of uranium, by using light hydrocarbon which is the product of the biochemical process of organism and the soluble organic matter as the source of carbon. The interaction of microb and organic matter controls the metallogenetic process of uranium in the deposit. (authors)

Definition and classification of surficial uranium deposits

International Nuclear Information System (INIS)

Toens, P.D.; Hambleton-Jones, B.B.

1984-01-01

Uraniferous surficial deposits may be broadly defined as uraniferous sediments or soils, usually of Tertiary to Recent age, that have not been subjected to deep burial and may or may not have been cemented to some degree. Evaluation of the available literature shows that confusion has arisen as to the use of the term ''calcrete'' when describing fluviatile sediments that have been calcified to a greater or lesser degree. It is felt that a useful purpose would be served by proposing a classification system which may go some way towards a redefinition of the applicable terminology. Unfortunately the terms ''calcrete'' or ''valley calcrete'' have been used to define Tertiary to Recent sediments ranging from boulder beds to silts which, in some Namibian examples, contain between 5 and 50% CaCO 3 and as much as 90% total carbonate in some Australian surficial uranium deposits. It is proposed that the detrital material constituting the sediments be prefixed with the terms calcareous, dolomitic, gypsiferous, halitiferous or ferruginous (e.g. calcareous grit) rather than the terms calcrete, dolocrete, gypcrete, and ferricrete, all of which have genetic connotations. The latter group of terms are preferably used for the pedogenic uranium deposits only. This will have the effect of placing these deposits in categories of their own and not confusing the issue with the overprint of pedogenic calcrete or duricrustal deposits which may or may not be present. This view is not shared by some authorities notably Butt and Carlisle (see this volume). (author)

Uranium-thorium and rare earth migration in granitic uranium deposits: comparison test with high level radioactive wastes in underground disposal

International Nuclear Information System (INIS)

Menager, M.T.

1991-01-01

The dispersion of U, Th and REE from a U-vein type deposit, localized in an intragranitic vein, through the surrounding host rock has been characterized by combining petrological, mineralogical, geochemical (major and trace elements, radiogenic isotopes) studies. The different stages of hydrothermal alteration, including those leading to changes in the major or trace elements concentrations have been identified. The distances over which U, Th and REE have migrated are estimated and correlated to the main water/rock interaction processes. The role of co-precipitation with secondary minerals in the retention of these elements is stressed. These processes are considered as analogous to those which could take place around a radioactive waste repository in a similar rock formation. The main geochemical implications of this work for the safety assessment of such a disposal are discussed. 7 figs., 27 refs

On the Genesis and Mineralization of the Tungsten Deposit Uludağ

Directory of Open Access Journals (Sweden)

G. van der KAADEN

1958-06-01

Full Text Available The tungsten deposit of Uludağ is closely linked with a late tectonic Paleozoic intrusion of a granodiorite - granite - batholith into a series of crystalline rocks and marbles. The deposit is located in a marble syncline folded into the granite. It is the tectonic structure of this syncline that controlled the location and the shape of the deposit. The mineralization took place after the granite of the border-zone was more or less solidified. High-temperature solutions and volatiles acted with the wall-rock along cracks, bedding-and shearing planes and resulted in the formation of tungsten-bearing sheets of tactile in the marble syncline and in the mineralization of a brecciated zone on both sides of the contact between marble and granite. The sequence of mineralization is discussed

Personal development and communication courses – Places available

CERN Multimedia

2013-01-01

There are places available in some personal development and communication courses taking place between February and June 2014.   For more information on the course, click on the course title to access the training catalogue. You can then sign-up online. For advice, you can contact: Erwin Mosselmans, tel. 74125, erwin.mosselmans@cern.ch Nathalie Dumeaux, tel. 78144, nathalie.dumeaux@cern.ch Kerstin Fuhrmeister, tel.70896, Kerstin.fuhrmeister@cern.ch Personal Development & Communication Training Session dates Duration Language Availability Communicating Effectively 18 – 19 March & 15 – 16 April 2 English 2 Gestion de temps Module 1 – 10 February 2014 (am) Module 2 – 21 March 2014  (am) Module 3 – 5 May 2014 (am) 1.5 French 12 Managing time Module 1 – 10 February 2014 (pm) Module 2 – 21 March 2014  (pm) Module 3 – 5 May 2014 (pm) 1.5...

Personal development and communication courses – Places available

CERN Multimedia

2013-01-01

There are places available in some personal development and communication courses taking place between February and June 2014.   For more information on the course, click on the course title to access the training catalogue. You can then sign-up online. For advice, you can contact: Erwin Mosselmans, tel. 74125, erwin.mosselmans@cern.ch Nathalie Dumeaux, tel. 78144, nathalie.dumeaux@cern.ch Kerstin Fuhrmeister, tel.70896, Kerstin.fuhrmeister@cern.ch Personal Development & Communication Training Session dates Duration Language Availability Communicating Effectively 18 – 19 March & 15 – 16 April 2 English 2 Gestion de temps Module 1 – 10 February 2014 (am) Module 2 – 21 March 2014  (am) Module 3 – 5 May 2014 (am) 1.5 French 12 Managing time Module 1 – 10 February 2014 (pm) Module 2 – 21 March 2014  (pm) Module 3 – 5 May 2014 (pm) 1.5 ...

Fundamental study of ash formation and deposition: Effect of reducing stoichiometry

Energy Technology Data Exchange (ETDEWEB)

Helble, J.J.; Bool, L.E.; Kang, S.G. [and others

1995-11-01

This project is designed to examine the effects of combustion stoichiometry on the fundamental aspects of ash formation and ash deposit initiation. Emphasis is being placed on reducing stoichiometries associated with low-NOx combustion, although a range of oxidant/fuel ratios are being considered. Previous work has demonstrated that ash formation depends strongly upon coal mineralogy, including mineral type, size, amount, and the presence of organically associated inorganic species. Combustion temperature and the oxidation state of iron also play a significant role. As these latter items will vary with changes in stoichiometry, research to determine the net effect on deposition is required.

Automatic detection of buried channel deposits from dense laser altimetry data

NARCIS (Netherlands)

Possel, B.M.J.; Lindenbergh, R.C.; Storms, J.E.A.

2010-01-01

The formation of the current Rhine-Meuse delta mainly took place during the last 12 000 years. Consecutive avulsions, i.e. sudden changes in the course of river channels, resulted in a complicated pattern of sandy channel deposits, surrounded by peat and clay. Knowledge of this pattern is not only

Children's Places

DEFF Research Database (Denmark)

Using a cross-cultural approach the book investigates children's places in different societies. "Children's Places" examines the ways in which children and adults, from their different vantage-points in society, negotiate proper places of children in both social and spatial terms. It looks at some...

Place-Identity in a School Setting: Effects of the Place Image

Science.gov (United States)

Marcouyeux, Aurore; Fleury-Bahi, Ghozlane

2011-01-01

Studies on place identity show positive relationships between the evaluation of a place and mechanisms involved in place identification. However, individuals also identify with places of low social prestige (places that bear a negative social image). Few authors investigate the nature of place identity processes in this case. The goal of this…

Nanostructured Diamond-Like Carbon Films Grown by Off-Axis Pulsed Laser Deposition

Directory of Open Access Journals (Sweden)

Seong Shan Yap

2015-01-01

Full Text Available Nanostructured diamond-like carbon (DLC films instead of the ultrasmooth film were obtained by pulsed laser ablation of pyrolytic graphite. Deposition was performed at room temperature in vacuum with substrates placed at off-axis position. The configuration utilized high density plasma plume arriving at low effective angle for the formation of nanostructured DLC. Nanostructures with maximum size of 50 nm were deposited as compared to the ultrasmooth DLC films obtained in a conventional deposition. The Raman spectra of the films confirmed that the films were diamond-like/amorphous in nature. Although grown at an angle, ion energy of >35 eV was obtained at the off-axis position. This was proposed to be responsible for subplantation growth of sp3 hybridized carbon. The condensation of energetic clusters and oblique angle deposition correspondingly gave rise to the formation of nanostructured DLC in this study.

75 FR 6321 - Schedule of Fees for Consular Services, Department of State and Overseas Embassies and Consulates

Science.gov (United States)

2010-02-09

..., sex printed erroneously) if submitted within one year of passport issuance. (g) Passport Book Security...) Passport card replacement NO FEE. for data correction (name, date of birth, place of birth, sex printed... depositions, including depositions by video teleconference (per daily appointment). (b) Attending or taking...

Extraction of prospecting information of uranium deposit based on high spatial resolution satellite data. Taking bashibulake region as an example

International Nuclear Information System (INIS)

Yang Xu; Liu Dechang; Zhang Jielin

2008-01-01

In this study, the signification and content of prospecting information of uranium deposit are expounded. Quickbird high spatial resolution satellite data are used to extract the prospecting information of uranium deposit in Bashibulake area in the north of Tarim Basin. By using the pertinent methods of image processing, the information of ore-bearing bed, ore-control structure and mineralized alteration have been extracted. The results show a high consistency with the field survey. The aim of this study is to explore practicability of high spatial resolution satellite data for prospecting minerals, and to broaden the thinking of prospectation at similar area. (authors)

Analyses of CsI aerosol deposition in aerosol behavior tests in WIND project

International Nuclear Information System (INIS)

Kudo, Tamotsu; Shibazaki, Hiroaki; Hidaka, Akihide

1999-01-01

The aerosol deposition tests have been performed in WIND project at JAERI to characterize the aerosol behavior. The aerosol deposition tests named WAV1-D and WAV2-D were analyzed by aerosol behavior analysis codes, JAERI's ART and SNL's VICTORIA. The comparison calculation was performed for the confirmation of the analytical capabilities of the both codes and improvement of the models in ART. The deposition mass calculated by ART was larger than that by VICTORIA. This discrepancy is caused by differences in model for FP vapor condensation onto the wall surface. In the WAV2-D test, in which boric acid was placed on the floor area of the test section prior to the deposition phase to simulate the PWR primary coolant, there was a discrepancy in deposition mass between analytical results in both codes and experimental results. The discrepancy may be caused by existence of boric acid which is not considered in the codes. (author)

Study of ion implantation in grown layers of multilayer coatings under ion-plasma vacuum deposition

International Nuclear Information System (INIS)

Voevodin, A.A.; Erokhin, A.L.

1993-01-01

The model of ion implantation into growing layers of a multilayer coating produced with vacuum ion-plasma deposition was developed. The model takes into account a possibility for ions to pass through the growing layer and alloys to find the distribution of implanted atoms over the coating thickness. The experimental vitrification of the model was carried out on deposition of Ti and TiN coatings

My Place Is Not Your Place

DEFF Research Database (Denmark)

Zenker, Sebastian; Beckmann, Suzanne C.

2013-01-01

Purpose – Cities increasingly compete with each other for attracting tourists, investors, companies, or residents. Marketers therefore focus on establishing the city as a brand, disregarding that the perception and knowledge of a city differ dramatically between the target audiences. Hence, place...... branding should emphasize much more the perceptions of the different target groups and develop strategies for advanced place brand management. The aim of this paper is to assess the important discrepancies between the city brand perceptions of different target groups with the help of network analysis......-ended-question survey with 334 participants. Findings – Structural differences for the city brand perceptions of two different target groups and the differences between perceptions of an external and internal target group are highlighted. The results and the managerial implications for place marketers are discussed...

Metalorganic chemical vapor deposition of iron disulfide and its use for solar energy conversion

Science.gov (United States)

Ennaoui, Ahmed; Fiechter, Sebastian; Vogel, Ralf; Giersig, M.; Weller, Horst; Tributsch, Helmut

1992-12-01

Thin polycrystalline films of iron disulfide have been grown on different substrates by chemical vapour deposition. The films were characterized using optical absorption and TEM. RBS and EDAX analysis has been used to explore the chemical stoichiometry. XRD and FTIR allowed the identification of both FeS2 phases pyrite and marcasite. A novel method for sensitization of highly porous Ti02 elecrodes with ultra thin (10-20 nm) polycrystalline films of FeS2 (pyrite) is presented. Photoelectrochemical solar cell using the above electrode generated high photovoltage of up to 600mV compared with single crystalline electrode (200 mV). In this device the semiconductor with a small band gap and high absorption coefficient (FeS2 pyrite; EG = 0.9 eV; a = 6 x 105 cm-1) absorbs the light and injects electrons into the conduction band the wide band gap semiconductor (Ti02 anatase; EG = 3.2 eV). Regeneration of holes is taking place by electron transfer from redox system in the electrolyte.

Simulation of dose deposition in stereotactic synchrotron radiation therapy: a fast approach combining Monte Carlo and deterministic algorithms

Energy Technology Data Exchange (ETDEWEB)

Smekens, F; Freud, N; Letang, J M; Babot, D [CNDRI (Nondestructive Testing using Ionizing Radiations) Laboratory, INSA-Lyon, 69621 Villeurbanne Cedex (France); Adam, J-F; Elleaume, H; Esteve, F [INSERM U-836, Equipe 6 ' Rayonnement Synchrotron et Recherche Medicale' , Institut des Neurosciences de Grenoble (France); Ferrero, C; Bravin, A [European Synchrotron Radiation Facility, Grenoble (France)], E-mail: francois.smekens@insa-lyon.fr

2009-08-07

A hybrid approach, combining deterministic and Monte Carlo (MC) calculations, is proposed to compute the distribution of dose deposited during stereotactic synchrotron radiation therapy treatment. The proposed approach divides the computation into two parts: (i) the dose deposited by primary radiation (coming directly from the incident x-ray beam) is calculated in a deterministic way using ray casting techniques and energy-absorption coefficient tables and (ii) the dose deposited by secondary radiation (Rayleigh and Compton scattering, fluorescence) is computed using a hybrid algorithm combining MC and deterministic calculations. In the MC part, a small number of particle histories are simulated. Every time a scattering or fluorescence event takes place, a splitting mechanism is applied, so that multiple secondary photons are generated with a reduced weight. The secondary events are further processed in a deterministic way, using ray casting techniques. The whole simulation, carried out within the framework of the Monte Carlo code Geant4, is shown to converge towards the same results as the full MC simulation. The speed of convergence is found to depend notably on the splitting multiplicity, which can easily be optimized. To assess the performance of the proposed algorithm, we compare it to state-of-the-art MC simulations, accelerated by the track length estimator technique (TLE), considering a clinically realistic test case. It is found that the hybrid approach is significantly faster than the MC/TLE method. The gain in speed in a test case was about 25 for a constant precision. Therefore, this method appears to be suitable for treatment planning applications.

Temperature buffer test. Installation of buffer, heaters and instruments in the deposition hole

Energy Technology Data Exchange (ETDEWEB)

Johannesson, Lars-Erik; Sanden, Torbjoern; Aakesson, Mattias [Clay Technology AB, Lund (Sweden); Barcena, Ignacio; Garcia-Sineriz, Jose Luis [Aitemin, Madrid (Spain)

2010-12-15

During 2003 the Temperature Buffer Test was installed in Aespoe Hard Rock Laboratory. Temperature, water pressure, relative humidity, total pressure and displacements etc. are measured in numerous points in the test. Most of the cables from the transducers are led in the deposition hole through slots in the rock surface of the deposition hole in watertight tubes to the data collection system in a container placed in the tunnel close to the deposition hole. This report describes the work with the installations of the buffer, heaters, and instruments and yields a description of the final location of all instruments. The report also contains a description of the materials that were installed and the densities yielded after placement.

Temperature buffer test. Installation of buffer, heaters and instruments in the deposition hole

International Nuclear Information System (INIS)

Johannesson, Lars-Erik; Sanden, Torbjoern; Aakesson, Mattias; Barcena, Ignacio; Garcia-Sineriz, Jose Luis

2010-12-01

During 2003 the Temperature Buffer Test was installed in Aespoe Hard Rock Laboratory. Temperature, water pressure, relative humidity, total pressure and displacements etc. are measured in numerous points in the test. Most of the cables from the transducers are led in the deposition hole through slots in the rock surface of the deposition hole in watertight tubes to the data collection system in a container placed in the tunnel close to the deposition hole. This report describes the work with the installations of the buffer, heaters, and instruments and yields a description of the final location of all instruments. The report also contains a description of the materials that were installed and the densities yielded after placement

Facts and fallacies in wet deposition modelling

International Nuclear Information System (INIS)

ApSimon, H.M.; Goddard, A.J.H.; Manning, P.M.; Simms, K.

1987-01-01

Following a reactor accident, relatively high contamination at ground level can occur, even at quite long distances from the source, if the pollutant cloud encounters intense precipitation. To estimate such contamination and its extent properly, it is necessary to take into account the spatial and temporal structure of rain patterns and their motion. Currently, models of wet deposition are rather crude. Source meteorology is usually used and is clearly inadequate. Furthermore, no allowance is made for the dynamic nature of rainfall, which occurs as a result of vertical air motions and convergence; nor for the different scavenging mechanism operating in and below cloud. Meteorological information available on these aspects of wet deposition is reviewed, and their importance and inclusion in modelling and prediction of resulting ground contamination is indicated. Some of the pitfalls of simple modelling procedures are illustrated. (author)

Reviews on the metallogenic and geological features of sandstone-type uranium deposits in Japan

International Nuclear Information System (INIS)

Pei Chengkai; Huang Xianfang; Zhang Baoju

2006-01-01

Regional geologic settings of sandstone-type uranium deposits in Japan are firstly analyzed. The regional tectonic evolution characteristics of 'Green tuff region' and 'Non green tuff region' and their relationship with uranium mineralization are elaborated in depth. Based on those mentioned above, the uranium sources of sandstone-type uranium deposits in Japan are discussed deeply and the most favorable uranium sources are considered to come from the basement and the surrounding granites. Their intrusive epochs range from Later Cretaceous to Palaeogene (about 60 to 70 Ma ago). The characteristics of ore-bearing host rocks, matter compositions of the deposits, ore formation enrichment factors, the hydrogeologic conditions and so on are described by taking Ningyo-Toge and Tono deposits as examples. Finally, the prospecting measures for the palaeo-channel sandstone-type uranium deposits (basal type) are reviewed. (authors)

Restructuring locality: practice, identity and place-making on the German-Polish border

DEFF Research Database (Denmark)

Sandberg, Marie

2016-01-01

Taking cities as analytical entry points for investigating practice, identity and place-making, this article explores the differential restructurings of locality in the twin cities of Görlitz and Zgorzelec on the German-Polish border. Drawing on ethnographic fieldwork, it shows how the local cities......′ leaderships are attempting to wrestle the cities out of their downmarket positioning in the global economy. Deploying a performative research strategy of methodological relationalism, the article examines intersections between these cities′ strategies of situating local youth within urban regeneration...... and cross-border projects and local youth′s preferences for engaging in other kinds of place-making. By ‘seeing’ the cities in border regions through practices of place-making within the multiscalar processes of urban regeneration, new insights about ‘place’ are generated in which city branding...

Major growth in coke production takes place

International Nuclear Information System (INIS)

Swain, E.J.

1991-01-01

U.S. petroleum coke production has increased 64% during the 10-year period from 1980 to 1990. This dramatic rise makes it timely to discuss the history and future of U.S. coking capacity, production, and processing. The article covers the properties and uses of the various grades of petroleum coke, as well as pricing and market trends

Fog deposition to the Atacama desert

Science.gov (United States)

Westbeld, A.; Klemm, O.; Griessbaum, F.; Sträter, E.; Larrain, H.; Osses, P.; Cereceda, P.

2010-07-01

In the Atacama Desert, one of the driest places on earth, fog deposition plays an important role for the water balance and for the survival of vulnerable ecosystems. The eddy covariance method, previously applied for the quantification of fog deposition to forests in various parts of the world, was used for the first time to measure deposition of fog water to a desert. We estimated the amount of water available for the ecosystem by deposition and determined the relevant processes driving fog deposition. This is especially important for the species Tillandsia landbecki living in coastal Atacama at the limit of plant existence with fog and dew being the only sources of liquid water. Between 31 July and 19 August, 2008, measurements were realized in a 31 ha large Tillandsia carpet at Cerro Guanaco, located 15 km south of Iquique, northern Chile. Several data quality assurance procedures were applied. For the values in compliance with the applied criteria, the mean total deposition per hour was determined (0.04 L per m2) for foggy periods. This number was applied to estimate the amount of water deposited during the measuring period, during the entire month of August 2008, and throughout a whole year. For August 2008, a frequency of fog of 16 %, as established during the measuring period, was assumed. The frequency for a whole year was estimated from the differences of the collected amount of water obtained with standard fog collectors installed at Cerro Guanaco in an earlier study. Calculations resulted in an amount of 2.5 L per m2 of deposited fog water for the measuring period. During the entire August, 4.4 L per m2 have likely been available, and for a whole year, a total of 25 L per m2 was estimated to have reached the surface. Inaccuracies could have been caused by the low amount of data applied, and by a possible underestimation of the deposition due to additional formation of radiation fog during the fog events. Three days were used for further analysis because

Place-Specific Computing

DEFF Research Database (Denmark)

Messeter, Jörn

2009-01-01

An increased interest in the notion of place has evolved in interaction design based on the proliferation of wireless infrastructures, developments in digital media, and a ‘spatial turn’ in computing. In this article, place-specific computing is suggested as a genre of interaction design that add......An increased interest in the notion of place has evolved in interaction design based on the proliferation of wireless infrastructures, developments in digital media, and a ‘spatial turn’ in computing. In this article, place-specific computing is suggested as a genre of interaction design...... that addresses the shaping of interactions among people, place-specific resources and global socio-technical networks, mediated by digital technology, and influenced by the structuring conditions of place. The theoretical grounding for place-specific computing is located in the meeting between conceptions...... of place in human geography and recent research in interaction design focusing on embodied interaction. Central themes in this grounding revolve around place and its relation to embodiment and practice, as well as the social, cultural and material aspects conditioning the enactment of place. Selected...

Atmospheric deposition of trace elements in Norway studied by means of moss analysis

International Nuclear Information System (INIS)

Steinnes, E.

1977-02-01

The atmospheric deposition of 28 elements in different parts of Norway was studied by means of moss analysis. The species Hylocomium splendens was selected after a comparison of different species. For several elements large regional differences were found. The highest concentration of these elements were found in the southernmost part of the country and in places near the west coast with high annual precipitation. The lowest values were found in places with low annual precipitation in Eastern Norway and the interior parts of the more northerly parts of the country. Within each region the highest deposition was observed in places with high annual precipitation. For the elements Pb, Sb, As, and Se the observed concentration range amounted to a factor of about 20. In the case of Ag, Cd, Cs, and V the range was smaller, but still amounting to a factor of 10 or more. A lower but still distinct spread was observed for Cr, Mo, Cu, and Zn. For all these elements long distance transport from sources in the densely populated and heavily industrialized parts of Europe probably are of importance for the obsreved distribution. (Auth.)

Photoelectrochemical energy conversion obtained with ultrathin organo-metallic-chemical-vapor-deposition layer of FeS2 (pyrite) on TiO2

International Nuclear Information System (INIS)

Ennaoui, A.; Fiechter, S.; Tributsch, H.; Giersig, M.; Vogel, R.; Weller, H.

1992-01-01

Ultrathin (10 to 20 nm thick), polycrystalline films of FeS 2 (pyrite) were grown on TiO 2 (anatase) by chemical vapor deposition. The FeS 2 films were characterized using optical absorption and high-resolution electron microscopy. Photoelectrochemical solar cells, using TiO 2 (anatase) coated with FeS 2 ultrathin films, generated high open-circuit photo-voltages, of up to 600 mV, compared with a single crystal of pyrite electrode (200 mV). The photoelectrochemical behavior shows a strong dependence of photovoltage and photocurrent on the pH of the solution. This paper reports that it is explained by electron injection from the conduction band of FeS 2 to the conduction band of TiO 2 . Regeneration of holes is taking place by electron transfer from the redox system in the electrolyte

Development of electrostatic supercapacitors by atomic layer deposition on nanoporous anodic aluminium oxides for energy harvesting applications

Directory of Open Access Journals (Sweden)

Lucia eIglesias

2015-03-01

Full Text Available Nanomaterials can provide innovative solutions for solving the usual energy harvesting and storage drawbacks that take place in conventional energy storage devices based on batteries or electrolytic capacitors, because they are not fully capable for attending the fast energy demands and high power densities required in many of present applications. Here, we report on the development and characterization of novel electrostatic supercapacitors made by conformal Atomic Layer Deposition on the high open surface of nanoporous anodic alumina membranes employed as templates. The structure of the designed electrostatic supercapacitor prototype consists of successive layers of Aluminium doped Zinc Oxide, as the bottom and top electrodes, together Al2O3 as the intermediate dielectric layer. The conformality of the deposited conductive and dielectric layers, together with their composition and crystalline structure have been checked by XRD and electron microscopy techniques. Impedance measurements performed for the optimized electrostatic supercapacitor device give a high capacitance value of 200 µF/cm2 at the frequency of 40 Hz, which confirms the theoretical estimations for such kind of prototypes, and the leakage current reaches values around of 1.8 mA/cm2 at 1 V. The high capacitance value achieved by the supercapacitor prototype together its small size turns these devices in outstanding candidates for using in energy harvesting and storage applications.

Seven place-conscious methods to stimulate situational interest in science teaching in urban environments

DEFF Research Database (Denmark)

Bølling, Mads; Hartmeyer, Rikke; Bentsen, Peter

2018-01-01

. The data consisted of transcribed interviews with 4 experienced teachers and 11 pupils. The interviews were elicited by films showing group work in science teaching in urban environments: a parking lot, a green public park and a zoo. We conducted individual interviews with science teachers, while......In this study, we explored how teachers can take advantage of a ‘place’ in urban environments outside the school and thereby stimulate pupils’ situational interest in science teaching. Drawing on the Sophos research method, we conducted a single case study including film-elicited interviews...... places; (3) alignment between the environment and task; (4) integrating minimal cultivated places; (5) providing a science perspective on everyday places; (6) disseminating historical or cultural knowledge of places; and (7) surprises. Starting from a discussion drawing on studies that explored triggers...

THE PLACE OF ENTREPRISE ECONOMY WITHIN ECONOMIC SCIENCES

Directory of Open Access Journals (Sweden)

CLAUDIA ISAC

2013-12-01

Full Text Available In this paper I have tried to present the place and importance of the discipline of Enterprise Economy among economic disciplines. Thus, in the first part we have showed the opinions of various authors from Romania on the interference of this discipline in the economic field with great implications through the 5 functions of the company to be presented. The second part of the thesis highlights the enterprise within modern economy and thus all the effects that increasingly complex and dynamic economic processes have upon the functions of the enterprise, the effective management of activities within the major functions of the enterprise: production, commercial, financial-accounting and human resources. Far from being just an analytic approach, this paper reveals the fact that the economy of enterprise is a theoretical and practical discipline with the aim of synthesizing basic knowledge of economic processes that take place at the microeconomic level.

Automated Trajectory Planner of Industrial Robot for Pick-and-Place Task

Directory of Open Access Journals (Sweden)

S. Saravana Perumaal

2013-02-01

Full Text Available Industrial robots, due to their great speed, precision and cost-effectiveness in repetitive tasks, now tend to be used in place of human workers in automated manufacturing systems. In particular, they perform the pick-and-place operation, a non-value-added activity which at the same time cannot be eliminated. Hence, minimum time is an important consideration for economic reasons in the trajectory planning system of the manipulator. The trajectory should also be smooth to handle parts precisely in applications such as semiconductor manufacturing, processing and handling of chemicals and medicines, and fluid and aerosol deposition. In this paper, an automated trajectory planner is proposed to determine a smooth, minimum-time and collision-free trajectory for the pick-and-place operations of a 6-DOF robotic manipulator in the presence of an obstacle. Subsequently, it also proposes an algorithm for the jerk-bounded Synchronized Trigonometric S-curve Trajectory (STST and the ‘forbidden-sphere’ technique to avoid the obstacle. The proposed planner is demonstrated with suitable examples and comparisons. The experiments show that the proposed planner is capable of providing a smoother trajectory than the cubic spline based trajectory.

Typology and geographic/geotectonic distribution of uranium deposits

International Nuclear Information System (INIS)

Dahlkamp, F.J.

1980-01-01

In the last ten years, twenty new uranium deposits have been discovered. They provide nearly 50% of the known and reasonably assured resources. The most important deposits known in the past by size and ore grade were those found in oligomictic quartz pebble conglomerates, sandstones and, to a lesser extent, hydrothermal veins. The type found more recently, which are greater in quantity than the former ones, are of the vein type (Canada, Australia) as well as of the intrusive type (Roessing, Namibia) and in calcretes (Yeelirrie, Australia) and acid volcanic rocks (Mexico). Several classifications have been worked out in the past (E.W. Heinrich, 1958; M. Roubault, 1958; A. Mancher, 1962). More recently new data have enabled these classifications to be extended on a worldwide basis (Ruzicka, 1971; Ziegler, 1974; Dahlkamp, 1974, 1978) or on a regional basis (McMillan for Canada, 1978; Ingram for Australia, 1974). This classification attempt takes all available useful data into consideration to define different types of uranium deposits in as comprehensive and strict a manner as possible

Better Place

DEFF Research Database (Denmark)

Rask, Morten; Bakke, Nikolas; Lindhøj, Jan

Better Place is trying to reshape the automotive industry by shifting transportation from a dependency on oil to a reliance on environmentally friendly renewable energy. Better Place is developing an extensive infrastructure system that will utilise overcapacity in the production of wind power...... among others and that will drive the global transportation industry to becoming driven by electric vehicles (EVs). Better Place does this by selling its customers 'mileage' and a car without a battery. The case highlights the internationalisation process of Better Place from an international business...... perspective in order to encourage a discussion and debate about how Better Place can make their grand vision a reality in the future by overcoming the obstacles that historically have been challenging the rise of the EV industry. The case includes a historical background of the EV industry by using Denmark...

Non-Place

DEFF Research Database (Denmark)

formulation. The anthology contains 17 articles engaged directly in the application, retrofitting and broadening of the concept of the non-place to a range of literary and media texts, as well as the merging of this concept to other theoretical concepts by e.g. Michel Foucault, Gilles Deleuze, Alain Badiou......We spend more and more of our everyday lives in what Marc Augé calls non-places – homogenous, but bland places of transit. This anthology addresses the representations of non-places in literature, culture and media, and critiques and re-actualizes Augé’s work twenty years after its initial...... Jutland, and many others. This anthology is the seventh publication in the IRGiC series and it springs from a research seminar held at Aalborg University in May 2013: “Non-Place in Literature, Media and Culture”....

Droplet deposition above a quench front during reflood after a large break LOCA

International Nuclear Information System (INIS)

Lee, R.

1982-01-01

Droplet deposition or migration towards the wall in a dispersed flow has been the subject of many investigations due to its industrial applications such as combustion of sprays of liquid fuel, evaporators, spray cooling, nuclear reactors, etc. Dispersed flow is characterized by high void and hence low droplet concentration and the theoretical study of droplet deposition is the treatment of a single droplet trajectory in the dispersed. As the droplet is travelling towards the wall, whether it will eventually be deposited on the wall or not, will be determined by the competing forces acting on it and by the boundary layer it is traversing through towards the wall. The mechanism of droplet deposition will be examined. The prediction of the boundary layer thickness will take into account the droplet size and density difference between the fluid and the droplet. Given the condition above the quench front, the minimum lateral velocity required for droplet deposition could be determined as a function of droplet diameter

Reflectance degradation of a secondary concentrator by nitrate salt vapor deposition in an open volumetric receiver configuration

Science.gov (United States)

Lahlou, Radia; Armstrong, Peter R.; Calvet, Nicolas; Shamim, Tariq

2017-06-01

Nitrate salt vapor deposition on the reflecting surface of a secondary concentrator placed on top of an open molten salt tank at 500 °C is investigated using a lab-scale setup over an 8h-exposure cycle. Deposition, consisting of mostly spherical particles, is characterized in terms of chemical composition using energy dispersive X-ray spectroscopy. The corresponding specular reflectance degradation both temporary (before washing off the salt deposits) and permanent (residual reflectance loss after cleaning), is measured at different incidence angles and at reference points located at different heights. Reflectance drop due to salt deposits is compared to the one resulting from dust deposition. Long-term reflectance degradation by means of corrosion needs to be further studied through suitable accelerated aging tests.

Criticality safety aspects of K-25 Building uranium deposit removal

International Nuclear Information System (INIS)

Haire, M.J.; Jordan, W.C.; Ingram, J.C. III; Stinnet, E.C. Jr.

1995-01-01

The K-25 Building of the Oak Ridge Gaseous Diffusion Plant (now the K-25 Site) went into operation during World War II as the first large scale production plant to separate 235 U from uranium by the gaseous diffusion process. It operated successfully until 1964, when it was placed in a stand-by mode. The Department of Energy has initiated a decontamination and decommissioning program. The primary objective of the Deposit Removal (DR) Project is to improve the nuclear criticality safety of the K-25 Building by removing enriched uranium deposits from unfavorable-geometry process equipment to below minimum critical mass. The method utilized to accomplish this are detailed in this report

Criticality safety aspects of K-25 Building uranium deposit removal

Energy Technology Data Exchange (ETDEWEB)

Haire, M.J.; Jordan, W.C. [Oak Ridge National Lab., TN (United States); Ingram, J.C. III; Stinnet, E.C. Jr. [Oak Ridge K-25 Site, TN (United States)

1995-12-31

The K-25 Building of the Oak Ridge Gaseous Diffusion Plant (now the K-25 Site) went into operation during World War II as the first large scale production plant to separate {sup 235}U from uranium by the gaseous diffusion process. It operated successfully until 1964, when it was placed in a stand-by mode. The Department of Energy has initiated a decontamination and decommissioning program. The primary objective of the Deposit Removal (DR) Project is to improve the nuclear criticality safety of the K-25 Building by removing enriched uranium deposits from unfavorable-geometry process equipment to below minimum critical mass. The method utilized to accomplish this are detailed in this report.

Sense of place and place identity: review of neuroscientific evidence.

Science.gov (United States)

Lengen, Charis; Kistemann, Thomas

2012-09-01

The aim of this review is to bring the phenomenological sense of place approach together with current results from neuroscience. We searched in neuroscientific literature for ten dimensions which were beforehand identified to be important in a phenomenological sense of place/place identity model: behaviour, body, emotion, attention, perception, memory, orientation, spirituality, meaning/value and culture/sociality. Neuroscience has identified many neurobiological correlates of phenomenological observations concerning sense of place. The human brain comprises specific and specialised structures and processes to perceive, memorise, link, assess and use spatial information. Specific parts (hippocampus, entorhinal, parahippocampal and parietal cortex), subregions (parahippocampal place area, lingual landmark area), and cells (place cells, grid cells, border cells, head direction cells) have been identified, their specific function could be understood and their interaction traced. Neuroscience has provided evidence that place constitutes a distinct dimension in neuronal processing. This reinforces the phenomenological argumentation of human geography and environmental psychology. Copyright © 2012 Elsevier Ltd. All rights reserved.

Basics of development of gas hydrate deposits

Energy Technology Data Exchange (ETDEWEB)

Makogon, Yuri F.; Holditch, Stephen A.; Makogon, Taras Y.

2005-07-01

Natural gas hydrate deposits could possibly be an important energy resource during this century. However, many problems associated with producing these deposits must first be solved. The industry must develop new technologies to produce the gas, to forecast possible tectonic cataclysms in regions of gas hydrate accumulations, and to prevent damage to the environment. These global issues must be addressed by every company or country who wants to produce gas hydrate deposits. Cooperative research between industry and universities can lead to technology breakthroughs in coming years. This paper reviews the Messoyakha field and the Blake Ridge and Nankai areas to explain a methodology for estimating how much gas might be producible from gas hydrate deposits (GHDs) under various conditions. The Messoyakha field is located on land, while the Blake Ridge and Nankai areas are offshore. Messoyakha is the first and the only GHD where gas production from hydrates has reached commercial flow rates. The Blake Ridge GHD has been studied for 20 years and 11 wells have been drilled to collect gas-hydrate samples. The potential resources of gas (gas in place) from Blake Ridge is estimated at 37.7Oe10{sup 12} m{sup 3} (1.330 Tcf) in hydrate form and 19.3Oe10{sup 12}m{sup 3} (681 Bcf) [5] in free gas. To estimate how much of the potential resource can be produced we need a thorough understanding of both the geologic and the thermodynamic characteristics of the formations. (Author)

Effect of high temperature deposition on CoSi2 phase formation

International Nuclear Information System (INIS)

Comrie, C. M.; Ahmed, H.; Smeets, D.; Demeulemeester, J.; Vantomme, A.; Turner, S.; Van Tendeloo, G.; Detavernier, C.

2013-01-01

This paper discusses the nucleation behaviour of the CoSi to CoSi 2 transformation from cobalt silicide thin films grown by deposition at elevated substrate temperatures ranging from 375 °C to 600 °C. A combination of channelling, real-time Rutherford backscattering spectrometry, real-time x-ray diffraction, and transmission electron microscopy was used to investigate the effect of the deposition temperature on the subsequent formation temperature of CoSi 2 , its growth behaviour, and the epitaxial quality of the CoSi 2 thus formed. The temperature at which deposition took place was observed to exert a significant and systematic influence on both the formation temperature of CoSi 2 and its growth mechanism. CoSi films grown at the lowest temperatures were found to increase the CoSi 2 nucleation temperature above that of CoSi 2 grown by conventional solid phase reaction, whereas the higher deposition temperatures reduced the nucleation temperature significantly. In addition, a systematic change in growth mechanism of the subsequent CoSi 2 growth occurs as a function of deposition temperature. First, the CoSi 2 growth rate from films grown at the lower reactive deposition temperatures is substantially lower than that grown at higher reactive deposition temperatures, even though the onset of growth occurs at a higher temperature, Second, for deposition temperatures below 450 °C, the growth appears columnar, indicating nucleation controlled growth. Elevated deposition temperatures, on the other hand, render the CoSi 2 formation process layer-by-layer which indicates enhanced nucleation of the CoSi 2 and diffusion controlled growth. Our results further indicate that this observed trend is most likely related to stress and changes in microstructure introduced during reactive deposition of the CoSi film. The deposition temperature therefore provides a handle to tune the CoSi 2 growth mechanism.

Geological and geochemical aspects of uranium deposits: a selected, annotated bibliography

Energy Technology Data Exchange (ETDEWEB)

Thomas, J.M.; Brock, M.L.; Garland, P.A.; White, M.B.; Daniel, E.W. (comps.)

1978-06-01

A compilation of 490 references is presented which is the second in a series compiled from the National Uranium Resource Evaluation (NURE) Bibliographic Data Base. This data base is one of six created by the Ecological Sciences Information Center, Oak Ridge National Laboratory, for the Grand Junction Office of the Department of Energy. Major emphasis for this volume has been placed on uranium geology, encompassing deposition, genesis of ore deposits, and ore controls; and prospecting techniques, including geochemistry and aerial reconnaissance. The following indexes are provided to aid the user in locating references of interest: author, geographic location, quadrangel name, geoformational feature, taxonomic name, and keyword.

Structural and genetic characteristics of uranium phosphates metasomatic deposits in limestones

Energy Technology Data Exchange (ETDEWEB)

Korolev, K G; Pigul' skij, V I; Prozorov, V G

1985-01-01

Voluminous literature on structural and genetic peculiarities of phosphorus-uranium deposits in Ordovician volcanogenic-sedimentary masses, is analyzed to clarify the reasons for their formation. On the basis of geologo-structural and mineralogo-geochemical research, it has been established that phosphorus-uranium mineralization is of metasomatic, postgeosyncline, intraorogenetic character. Mineralization is related to filtration of uprising fluids along rupture untrafolding violations. Formation of metasomatic ore bodies took place under hypabyssal conditions in closed structures by means of endogenous replacement of both carbonate and alumosilicate rocks, including intrusive volcanic and sedimentary complexes. The scale of phosphorus-uranium deposits depends on tectonic peculiarities of ore-containing medium much more than on lithological ones.

Geological and geochemical aspects of uranium deposits: a selected, annotated bibliography

International Nuclear Information System (INIS)

Thomas, J.M.; Brock, M.L.; Garland, P.A.; White, M.B.; Daniel, E.W.

1978-06-01

A compilation of 490 references is presented which is the second in a series compiled from the National Uranium Resource Evaluation (NURE) Bibliographic Data Base. This data base is one of six created by the Ecological Sciences Information Center, Oak Ridge National Laboratory, for the Grand Junction Office of the Department of Energy. Major emphasis for this volume has been placed on uranium geology, encompassing deposition, genesis of ore deposits, and ore controls; and prospecting techniques, including geochemistry and aerial reconnaissance. The following indexes are provided to aid the user in locating references of interest: author, geographic location, quadrangel name, geoformational feature, taxonomic name, and keyword

Phanerozoic Rifting Phases And Mineral Deposits

Science.gov (United States)

Hassaan, Mahmoud

2016-04-01

connected with NW,WNW and N-S faults genetically related to volcano-hydrothermal activity associated the Red Sea rifting. At Sherm EL-Sheikh hydrothermal manganese deposit occurs in Oligocene clastics within fault zone. Four iron-manganese-barite mineralization in Esh-Elmellaha plateau are controlled by faults trending NW,NE and nearly E-W intersecting Miocene carbonate rocks. Barite exists disseminated in the ores and as a vein in NW fault. In Shalatee - Halaib district 24 manganese deposits and barite veins with sulphide patches occur within Miocene carbonates distributed along two NW fault planes,trending 240°and 310° and occur in granite and basalt . Uranium -lead-zinc sulfide mineralization occur in Late Proterozoic granite, Late Cretaceous sandstones, and chiefly in Miocene clastic-carbonate-evaporate rocks. The occurrences of uranium- lead-zinc and iron-manganese-barite mineralization have the characteristic features of hypogene cavity filling and replacement deposits correlated with Miocene- Recent Aden volcanic rocks rifting. In western Saudi Arabia barite-lead-zinc mineralization occurs at Lat. 25° 45' and 25° 50'N hosted by Tertiary sediments in limestone nearby basaltic flows and NE-SW fault system. The mineralized hot brines in the Red Sea deeps considered by the author a part of this province. The author considers the constant rifting phases of Pangea and then progressive fragmentation of Western Gondwana during the Late Carboniferous-Lias, Late Jurassic-Early Aptian, Late Aptian - Albian and Late Eocene-Early Miocene and Oligocene-Miocene, responsible for formation of the mineral deposits constituting the M provinces. During these events, rifting, magmatism and hydrothermal activities took place in different peri-continental margins.

Deposition and effects on some aquatic organisms of particulate matter emitted from some peat fuelled power plants in Finland. Deposition och effekter paa naagra vattenlevande organismer av emitterat stoft fraan naagra torveldade kraftverk i Finland

Energy Technology Data Exchange (ETDEWEB)

Bengtsson, C; Fischer, S; Hellstroem, T; Notini, M; Steen, B; Waltersson, E; Landner, L

1982-01-01

At three different peat fuelled plants in Finland, environmental studies have been carried out with the aim of obtaining part of the background data necessary for the formulation of environmental guidelines in relation to the future use of peat for energy and heat production in Sweden. The present project was comprised of (a) field studies of the composition pattern of polyaromatic hydrocarbons (PAH) and of heavy metals in the surroundings of some existing peat fuelled power plants, and (b) laboratory tests with a few aquatic organisms to check the possible biological effects induced by emitted particles. The results of these studies indicate that the deposition of (PAH) in the surroundings of three power plants (measured by snow sampling and by analysis of kale grown in the area) did not exceed the background level, whereas the deposition of heavy metals emitted from one power plant resulted in increased concentrations of Fe, Mn, Pb, Zn and possibly of Hg, compared to the assumed background level. Biological tests with particles originating from two different peat fuelled power plants showed that only weak, but obvious, effects could be detected at concentrations corresponding to realistic deposition levels. These effects are supposed to be due to the metal content of the particles rather than to the PAH content. When evaluating the lab results, it should be considered that a certain fixation of metals dissolved in the snow melting water may take place in the soil surface. Therefore, the biological effect studies, carried out so far, do not indicate that peat combustion at the investigated power plants, using efficient flue gas cleaning systems, cause any considerable biological effects in the surroundings of the plants. However, it is evident that the present set of data does not allow a general evaluation of the over-all environmental impact of peat combustion.

Evaluation of methods for characterizations of deposits; Utvaerdering av metoder foer avlagringsmaetningar

Energy Technology Data Exchange (ETDEWEB)

Hoegberg, J.; Bjoerkman, P. [Vattenfall Utveckling AB, Aelvkarleby (Sweden)

2001-11-01

In boilers there are problems with deposits on parts exposed to the flue gas, in particular on heat exchanging parts and to an increasing extent with the changeover to the use of biofuels and wood waste fuels. In order to solve the problems deposits are examined by using a deposit probe and taking deposit samples from the interior of the boiler. In this report an evaluation of methods of analysis is performed based on experiences in both literature and laboratory work. The evaluation forms the basis of an instruction for deposit measurements in 'Vaermeforsks Maethandbok'. The procedure for use of deposit probes is treated as well as the importance of careful and well planned sample preparation before analysis. In the literature a large number of methods used for analysis of deposits from flue ashes and similar applications are found. The methods include chemical analyses of solids and liquids, analysis of crystal structures, thermal properties and the solid mechanics of the materials. Several methods, for example SEM-EDX, XRF, ICP, IC and methods for determining the mechanical and thermal properties are suited for a survey examination of a deposit, while more specialised methods with higher resolution can add information but require a clear framing of a question and in practice are suited for only separate samples. Examples from the latter category are AES, ESCA and TOF-SIMS.

Characterization of the acidic cold seep emplaced jarositic Golden Deposit, NWT, Canada, as an analogue for jarosite deposition on Mars

Science.gov (United States)

Battler, Melissa M.; Osinski, Gordon R.; Lim, Darlene S. S.; Davila, Alfonso F.; Michel, Frederick A.; Craig, Michael A.; Izawa, Matthew R. M.; Leoni, Lisa; Slater, Gregory F.; Fairén, Alberto G.; Preston, Louisa J.; Banerjee, Neil R.

2013-06-01

Surficial deposits of the OH-bearing iron sulfate mineral jarosite have been observed in several places on Mars, such as Meridiani Planum and Mawrth Vallis. The specific depositional conditions and mechanisms are not known, but by comparing martian sites to analogous locations on Earth, the conditions of formation and, thus, the martian depositional paleoenvironments may be postulated. Located in a cold semi-arid desert ˜100 km east of Norman Wells, Northwest Territories, Canada, the Golden Deposit (GD) is visible from the air as a brilliant golden-yellow patch of unvegetated soil, approximately 140 m × 50 m. The GD is underlain by permafrost and consists of yellow sediment, which is precipitating from seeps of acidic, iron-bearing groundwater. On the surface, the GD appears as a patchwork of raised polygons, with acidic waters flowing from seeps in troughs between polygonal islands. Although UV-Vis-NIR spectral analysis detects only jarosite, mineralogy, as determined by X-ray diffraction and inductively coupled plasma emission spectrometry, is predominantly natrojarosite and jarosite, with hydronium jarosite, goethite, quartz, clays, and small amounts of hematite. Water pH varies significantly over short distances depending on proximity to acid seeps, from 2.3 directly above seeps, to 5.7 several m downstream from seeps within the deposit, and up to 6.5 in ponds proximal to the deposit. Visual observations of microbial filament communities and phospholipid fatty acid analyses confirm that the GD is capable of supporting life for at least part of the year. Jarosite-bearing sediments extend beneath vegetation up to 70 m out from the deposit and are mixed with plant debris and minerals presumably weathered from bedrock and glacial till. This site is of particular interest because mineralogy (natrojarosite, jarosite, hematite, and goethite) and environmental conditions (permafrost and arid conditions) at the time of deposition are conceivably analogous to jarosite

A Philosophical Topography of Place and Non-Place: Lithuanian Context

Directory of Open Access Journals (Sweden)

Odeta Žukauskienė

2016-09-01

Full Text Available Drawing on French anthropologist Marc Augé and his seminal book Non-Places (1995 the author pays attention to the transformation of contemporary urban landscapes. In thinking trough the dialectic of place and non-place, this paper aims to account for the apparent sense of placelesness in our cultural landscapes and in increasingly globalised world. If we want to ask fundamental questions about what has happened to our urban landscape and to the spirit of cities during the last decades then the concepts of place and non-place help us to describe the actual changes. Besides, Augé’s work gives us the methodological tools to address philosophical questions about the nature of supermodernity and the relationship between modernity and postmodernity moving toward new conditions of globality. This article will attempt to apply anthropological and philosophical concepts of place and space to the context of Lithuania, comparing the ways of spreading of non-places (non-lieu in the Soviet modernity and contemporary global, hyper-visual and liquid cultural landscape.

Thin films of copper oxide and copper grown by atomic layer deposition for applications in metallization systems of microelectronic devices

Energy Technology Data Exchange (ETDEWEB)

Waechtler, Thomas

2010-05-25

Copper-based multi-level metallization systems in today's ultralarge-scale integrated electronic circuits require the fabrication of diffusion barriers and conductive seed layers for the electrochemical metal deposition. Such films of only several nanometers in thickness have to be deposited void-free and conformal in patterned dielectrics. The envisaged further reduction of the geometric dimensions of the interconnect system calls for coating techniques that circumvent the drawbacks of the well-established physical vapor deposition. The atomic layer deposition method (ALD) allows depositing films on the nanometer scale conformally both on three-dimensional objects as well as on large-area substrates. The present work therefore is concerned with the development of an ALD process to grow copper oxide films based on the metal-organic precursor bis(trin- butylphosphane)copper(I)acetylacetonate [({sup n}Bu{sub 3}P){sub 2}Cu(acac)]. This liquid, non-fluorinated {beta}-diketonate is brought to react with a mixture of water vapor and oxygen at temperatures from 100 to 160 C. Typical ALD-like growth behavior arises between 100 and 130 C, depending on the respective substrate used. On tantalum nitride and silicon dioxide substrates, smooth films and selfsaturating film growth, typical for ALD, are obtained. On ruthenium substrates, positive deposition results are obtained as well. However, a considerable intermixing of the ALD copper oxide with the underlying films takes place. Tantalum substrates lead to a fast self-decomposition of the copper precursor. As a consequence, isolated nuclei or larger particles are always obtained together with continuous films. The copper oxide films grown by ALD can be reduced to copper by vapor-phase processes. If formic acid is used as the reducing agent, these processes can already be carried out at similar temperatures as the ALD, so that agglomeration of the films is largely avoided. Also for an integration with subsequent

Thin films of copper oxide and copper grown by atomic layer deposition for applications in metallization systems of microelectronic devices

Energy Technology Data Exchange (ETDEWEB)

Waechtler, Thomas

2010-05-25

Copper-based multi-level metallization systems in today's ultralarge-scale integrated electronic circuits require the fabrication of diffusion barriers and conductive seed layers for the electrochemical metal deposition. Such films of only several nanometers in thickness have to be deposited void-free and conformal in patterned dielectrics. The envisaged further reduction of the geometric dimensions of the interconnect system calls for coating techniques that circumvent the drawbacks of the well-established physical vapor deposition. The atomic layer deposition method (ALD) allows depositing films on the nanometer scale conformally both on three-dimensional objects as well as on large-area substrates. The present work therefore is concerned with the development of an ALD process to grow copper oxide films based on the metal-organic precursor bis(trin- butylphosphane)copper(I)acetylacetonate [({sup n}Bu{sub 3}P){sub 2}Cu(acac)]. This liquid, non-fluorinated {beta}-diketonate is brought to react with a mixture of water vapor and oxygen at temperatures from 100 to 160 C. Typical ALD-like growth behavior arises between 100 and 130 C, depending on the respective substrate used. On tantalum nitride and silicon dioxide substrates, smooth films and selfsaturating film growth, typical for ALD, are obtained. On ruthenium substrates, positive deposition results are obtained as well. However, a considerable intermixing of the ALD copper oxide with the underlying films takes place. Tantalum substrates lead to a fast self-decomposition of the copper precursor. As a consequence, isolated nuclei or larger particles are always obtained together with continuous films. The copper oxide films grown by ALD can be reduced to copper by vapor-phase processes. If formic acid is used as the reducing agent, these processes can already be carried out at similar temperatures as the ALD, so that agglomeration of the films is largely avoided. Also for an integration with subsequent

Epitaxial TiO 2/SnO 2 core-shell heterostructure by atomic layer deposition

KAUST Repository

Nie, Anmin; Liu, Jiabin; Li, Qianqian; Cheng, Yingchun; Dong, Cezhou; Zhou, Wu; Wang, Pengfei; Wang, Qingxiao; Yang, Yang; Zhu, Yihan; Zeng, Yuewu; Wang, Hongtao

2012-01-01

Taking TiO 2/SnO 2 core-shell nanowires (NWs) as a model system, we systematically investigate the structure and the morphological evolution of this heterostructure synthesized by atomic layer deposition/epitaxy (ALD/ALE). All characterizations

20 CFR 703.306 - Kinds of negotiable securities that may be deposited; conditions of deposit; acceptance of deposits.

Science.gov (United States)

2010-04-01

... the Act in the amount fixed by the Office under the regulations in this part shall deposit any... deposited; conditions of deposit; acceptance of deposits. 703.306 Section 703.306 Employees' Benefits... negotiable securities that may be deposited; conditions of deposit; acceptance of deposits. A self-insurer or...

Kinetics of particle deposition at heterogeneous surfaces

Science.gov (United States)

Stojiljković, D. Lj.; Vrhovac, S. B.

2017-12-01

The random sequential adsorption (RSA) approach is used to analyze adsorption of spherical particles of fixed diameter d0 on nonuniform surfaces covered by square cells arranged in a square lattice pattern. To characterize such pattern two dimensionless parameters are used: the cell size α and the cell-cell separation β, measured in terms of the particle diameter d0. Adsorption is assumed to occur if the particle (projected) center lies within a cell area. We focus on the kinetics of deposition process in the case when no more than a single disk can be placed onto any square cell (α deposition process is not consistent with the power law behavior. However, if the geometry of the pattern approaches towards ;noninteracting conditions; (β > 1), when adsorption on each cell can be decoupled, approach of the coverage fraction θ(t) to θJ becomes closer to the exponential law. Consequently, changing the pattern parameters in the present model allows to interpolate the deposition kinetics between the continuum limit and the lattice-like behavior. Structural properties of the jammed-state coverings are studied in terms of the radial distribution function g(r) and spatial distribution of particles inside the cell. Various, non-trivial spatial distributions are observed depending on the geometry of the pattern.

Places disponibles*/Places available ** - French version only

CERN Multimedia

2003-01-01

Des places sont disponibles dans les cours suivants : Places are available in the following course : Java 2 Enterprise Edition - Part 2 : Enterprise JavaBeans : 20 - 22.1.03 (3 days) Introduction to PVSS : 27.1.03 (Afternoon) free course but registration necessary Basic PVSS : 28 - 30.1.03 (3 days) MAGNE-03 - Magnétisme pour l'électrotechnique : 28 - 30.1.03 (3 jours) Introduction to the CERN Engineering Data Management System : 28.1.03 (1 day) MAGNE-03 - Magnetism for Technical Electronics : 11 - 13.2.03 (3 days) AutoCAD 2002 - niveau 1 : 24, 25.2 et 3, 4.3.03 (4 jours) AutoCAD 2002 - niveau 2 : 27 & 28.2.03 (2 jours) C++ for Particle Physicists : 10 - 14.3.03 (6 X 3 hour lectures) AutoCAD Mechanical 6 PowerPack (F) : 12, 13, 17, 18, 24 & 25.3.03 (6 jours) * Etant donné le délai d'impression du Bulletin, ces places peuvent ne plus être disponibles au moment de sa parution. Veuillez consulter notre site Web pour avoir la dernière mise à jour. ** The number of places available may va...

Place in Transition

DEFF Research Database (Denmark)

Mikkelsen, Jacob Bjerre; Lange, Ida Sofie Gøtzsche

from the 'Everyday World'. Within mobilities studies, research has focused on different aspects and consequences of the post-oil society (see Dennis & Urry 2009, Urry 2013). This paper discusses the conception of place within the enclosed 'Oil World' with point of departure in relocation...... and redefinition of oil rigs from an urban design perspective. The paper constitutes a theoretical basis for future design scenarios - exemplified through visionary urban design proposals for a specific site in the city of Esbjerg, Denmark. Relocating rigs to an urban context initiates discussions of conception...... of 'Place' questioning the fixity of 'Place' (Jensen 2010). Scoped through a relational sense of place (Massey 1993) and the potential of exploring new relations between places (Burns & Kahn 2005), the paper challenges the notion of 'Place as God' (Hvattum 2010). These places in transition contest...

Tsunami deposits

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-08-15

The NSC (the Nuclear Safety Commission of Japan) demand to survey on tsunami deposits by use of various technical methods (Dec. 2011), because tsunami deposits have useful information on tsunami activity, tsunami source etc. However, there are no guidelines on tsunami deposit survey in JAPAN. In order to prepare the guideline of tsunami deposits survey and evaluation and to develop the method of tsunami source estimation on the basis of tsunami deposits, JNES carried out the following issues; (1) organizing information of paleoseismological record and tsunami deposit by literature research, (2) field survey on tsunami deposit, and (3) designing the analysis code of sediment transport due to tsunami. As to (1), we organize the information gained about tsunami deposits in the database. As to (2), we consolidate methods for surveying and identifying tsunami deposits in the lake based on results of the field survey in Fukui Pref., carried out by JNES. In addition, as to (3), we design the experimental instrument for hydraulic experiment on sediment transport and sedimentation due to tsunamis. These results are reflected in the guideline on the tsunami deposits survey and evaluation. (author)

Tsunami deposits

International Nuclear Information System (INIS)

2013-01-01

The NSC (the Nuclear Safety Commission of Japan) demand to survey on tsunami deposits by use of various technical methods (Dec. 2011), because tsunami deposits have useful information on tsunami activity, tsunami source etc. However, there are no guidelines on tsunami deposit survey in JAPAN. In order to prepare the guideline of tsunami deposits survey and evaluation and to develop the method of tsunami source estimation on the basis of tsunami deposits, JNES carried out the following issues; (1) organizing information of paleoseismological record and tsunami deposit by literature research, (2) field survey on tsunami deposit, and (3) designing the analysis code of sediment transport due to tsunami. As to (1), we organize the information gained about tsunami deposits in the database. As to (2), we consolidate methods for surveying and identifying tsunami deposits in the lake based on results of the field survey in Fukui Pref., carried out by JNES. In addition, as to (3), we design the experimental instrument for hydraulic experiment on sediment transport and sedimentation due to tsunamis. These results are reflected in the guideline on the tsunami deposits survey and evaluation. (author)

Enhanced properties of tungsten thin films deposited with a novel HiPIMS approach

Science.gov (United States)

Velicu, Ioana-Laura; Tiron, Vasile; Porosnicu, Corneliu; Burducea, Ion; Lupu, Nicoleta; Stoian, George; Popa, Gheorghe; Munteanu, Daniel

2017-12-01

Despite the tremendous potential for industrial use of tungsten (W), very few studies have been reported so far on controlling and tailoring the properties of W thin films obtained by physical vapor deposition techniques and, even less, for those deposited by High Power Impulse Magnetron Sputtering (HiPIMS). This study presents results on the deposition process and properties characterization of nanocrystalline W thin films deposited on silicon and molybdenum substrates (100 W average sputtering power) by conventional dc magnetron sputtering (dcMS) and HiPIMS techniques. Topological, structural, mechanical and tribological properties of the deposited thin films were investigated. It was found that in HiPIMS, both deposition process and coatings properties may be optimized by using an appropriate magnetic field configuration and pulsing design. Compared to the other deposited samples, the W films grown in multi-pulse (5 × 3 μs) HiPIMS assisted by an additional magnetic field, created with a toroidal-shaped permanent magnet placed in front of the magnetron cathode, show significantly enhanced properties, such as: smoother surfaces, higher homogeneity and denser microstructure, higher hardness and Young's modulus values, better adhesion to the silicon substrate and lower coefficient of friction. Mechanical behaviour and structural changes are discussed based on plasma diagnostics results.

Bioassessment metrics and deposited sediments in tributaries of the Chattooga river watershed

Science.gov (United States)

Erica Chiao; J. Bruce Wallace

2003-01-01

Excessive sedimentation places waters of the Chattooga River network at risk of biological impairment. Monitoring efforts could be improved by including metrics that are responsive to changes in levels of fine sediments. We sampled three habitats (riffle, depositional, bedrock outcrop) for benthic macroinvertebrates at four sites in three low-order, tributary reaches...

Respiratory trace deposition models. Final report

International Nuclear Information System (INIS)

Yeh, H.C.

1980-03-01

Respiratory tract characteristics of four mammalian species (human, dog, rat and Syrian hamster) were studied, using replica lung casts. An in situ casting techniques was developed for making the casts. Based on an idealized branch model, over 38,000 records of airway segment diameters, lengths, branching angles and gravity angles were obtained from measurements of two humans, two Beagle dogs, two rats and one Syrian hamster. From examination of the trimmed casts and morphometric data, it appeared that the structure of the human airway is closer to a dichotomous structure, whereas for dog, rat and hamster, it is monopodial. Flow velocity in the trachea and major bronchi in living Beagle dogs was measured using an implanted, subminiaturized, heated film anemometer. A physical model was developed to simulate the regional deposition characteristics proposed by the Task Group on Lung Dynamics of the ICRP. Various simulation modules for the nasopharyngeal (NP), tracheobronchial (TB) and pulmonary (P) compartments were designed and tested. Three types of monodisperse aerosols were developed for animal inhalation studies. Fifty Syrian hamsters and 50 rats were exposed to five different sizes of monodisperse fused aluminosilicate particles labeled with 169 Yb. Anatomical lung models were developed for four species (human, Beagle dog, rat and Syrian hamster) that were based on detailed morphometric measurements of replica lung casts. Emphasis was placed on developing a lobar typical-path lung model and on developing a modeling technique which could be applied to various mammalian species. A set of particle deposition equations for deposition caused by inertial impaction, sedimentation, and diffusion were developed. Theoretical models of particle deposition were developed based on these equations and on the anatomical lung models

Electrophoretic Deposition of Gallium with High Deposition Rate

Directory of Open Access Journals (Sweden)

Hanfei Zhang

2014-12-01

Full Text Available In this work, electrophoretic deposition (EPD is reported to form gallium thin film with high deposition rate and low cost while avoiding the highly toxic chemicals typically used in electroplating. A maximum deposition rate of ~0.6 μm/min, almost one order of magnitude higher than the typical value reported for electroplating, is obtained when employing a set of proper deposition parameters. The thickness of the film is shown to increase with deposition time when sequential deposition is employed. The concentration of Mg(NO32, the charging salt, is also found to be a critical factor to control the deposition rate. Various gallium micropatterns are obtained by masking the substrate during the process, demonstrating process compatibility with microfabrication. The reported novel approach can potentially be employed in a broad range of applications with Ga as a raw material, including microelectronics, photovoltaic cells, and flexible liquid metal microelectrodes.

A Port-Hamiltonian Approach to Visual Servo Control of a Pick and Place System

NARCIS (Netherlands)

Dirksz, Daniel A.; Scherpen, Jacquelien M. A.; Steinbuch, Maarten

In this paper, we take a port-Hamiltonian approach to address the problem of image-based visual servo control of a pick and place system. Through a coordinate transformation and a passive interconnection between mechanical system and camera dynamics we realize a closed-loop system that is

Evidence for the Importance of Atmospheric Nitrogen Deposition to Eutrophic Lake Dianchi, China

Science.gov (United States)

Zhan, X.; Bo, Y.; Zhou, F.; Liu, X.; Paerl, H. W.; Shen, J.; Wang, R.; Li, F. R.; Tao, S.; Yanjun, D.; Tang, X.

2017-12-01

Elevated atmospheric nitrogen (N) deposition has significantly influenced aquatic ecosystems, especially with regard to their N budgets and phytoplankton growth potentials. Compared to a considerable number of studies on oligotrophic lakes and oceanic waters, little evidence for the importance of N deposition has been generated for eutrophic lakes, even though emphasis has been placed on reducing external N inputs to control eutrophication in these lakes. Our high-resolution observations of atmospheric depositions and riverine inputs of biologically reactive N species into eutrophic Lake Dianchi (the sixth largest freshwater lake in China) shed new light onto the contribution of N deposition to total N loads. Annual N deposition accounted for 15.7% to 16.6% of total N loads under variable precipitation conditions, 2-fold higher than previous estimates (7.6%) for the Lake Dianchi. The proportion of N deposition to total N loads further increased to 27-48% in May and June when toxic blooms of the ubiquitous non-N2 fixing cyanobacteria Microcystis spp. are initiated and proliferate. Our observations reveal that reduced N (59%) contributes a greater amount than oxidized N to total N deposition, reaching 56-83% from late spring to summer. Progress toward mitigating eutrophication in Lake Dianchi and other bloom-impacted eutrophic lakes will be difficult without reductions in ammonia emissions and subsequent N deposition.

Der Einsatz der sozialen Medien im Place Branding. Das Beispiel Allgäu

Science.gov (United States)

Kräußlich, Bernhard; Schürholz, Peter

2017-12-01

This article focuses on the opportunities and risks of using social media in place branding. Where local authorities provide their content in the context of a place branding via social media, the users gain attributes of a prosumer, most important of which is the high potential for participating in the actual branding process. This active participation causes a variety of changes compared to a branding process without social media. Thus, a qualitative, a quantitative, as well as a temporal and spatial increase of contact with the brand can be determined, though, by virtue of the anonymity provided by the Internet, it is quite possible that this all takes place covertly. A permanent monitoring of the branding process on the part of the operators has become necessary in order to react quickly to changes. The Allgäu model offers a possible procedure for reacting to the new requirements in social media-sampled place branding.

Last piece of ATLAS takes the plunge

CERN Multimedia

2008-01-01

On Friday 29 February the second small wheel was lowered 100 metres underground into the ATLAS cavern in front of a captivated audience. Although called the "small wheels" they are small in name only - each wheel is 9.3 metres in diameter and weighs 100 tonnes including the massive shielding elements. This piece completes ATLAS’ muon spectrometer, which has the ability to accurately track particles to the width of a human hair. The first piece of ATLAS was installed in 2003 and, five years later, this small wheel is the final large piece of the detector to take the subterranean voyage to its final resting place.

Deposition of eroded soil on terraced croplands in Minchet catchment, Ethiopian Highlands

Directory of Open Access Journals (Sweden)

Alemtsehay Subhatu

2017-09-01

Full Text Available In the Ethiopian Highlands, soil and water conservation practices are of utmost importance to conserve eroded soil and combat soil loss. This study provides detailed results on on-site sediment deposition and net soil loss in terraced croplands in a catchment in the sub-humid Ethiopian Highlands. Sediment deposition was measured on horse bean and maize fields during the crop growing seasons of 2014 and 2015. Measurements took place on observation plots on terraced cropland with varying spacing between terraces and varying slope gradients. Net soil loss, in this case the amount leaving the terraced cropland, was calculated by modelling the Universal Soil Loss Equation (USLE for the whole observation field and subtracting the measured sediment deposition. The study result showed about 8–11 t ha−1 sediment was deposited in the deposition zone of the terraced cropland, with greater sediment deposition on terraces with narrow spacing and steeper slope gradients. Sediment deposition was highest in July and August, and relatively low in September. Annual soil loss ranged from 32 to 37 t ha−1 in the terraced cropland of the study area. From the total soil loss in the crop growing season, about 54–74% sediment was deposited on the deposition zone of terraced crop fields. Implementation of soil and water conservation with narrow spacing, especially on the steep slopes of the sub-humid Ethiopian Highlands or other similar area, are thus highly recommended as they enable conservation of the eroded soil in the cropland.

Localized removal of layers of metal, polymer, or biomaterial by ultrasound cavitation bubbles

NARCIS (Netherlands)

Rivas, David Fernandez; Verhaagen, Bram; Seddon, James R. T.; Zijlstra, Aaldert G.; Jiang, Lei-Meng; van der Sluis, Luc W. M.; Versluis, Michel; Lohse, Detlef; Gardeniers, Han J. G. E.

We present an ultrasonic device with the ability to locally remove deposited layers from a glass slide in a controlled and rapid manner. The cleaning takes place as the result of cavitating bubbles near the deposited layers and not due to acoustic streaming. The bubbles are ejected from air-filled

Localized removal of layers of metal, polymer, or biomaterial by ultrasound cavitation bubbles

NARCIS (Netherlands)

Fernandez Rivas, David; Verhaagen, B.; Seddon, James Richard Thorley; Zijlstra, A.G.; Jiang, L.M.; van der Sluis, L.W.M.; Versluis, Michel; Lohse, Detlef; Gardeniers, Johannes G.E.

2012-01-01

We present an ultrasonic device with the ability to locally remove deposited layers from a glass slide in a controlled and rapid manner. The cleaning takes place as the result of cavitating bubbles near the deposited layers and not due to acoustic streaming. The bubbles are ejected from air-filled

50 CFR 18.22 - Taking by Federal, State or local government officials.

Science.gov (United States)

2010-10-01

... or employee may take a marine mammal in the course of his duties as an official or employee and no... protection or welfare of such mammal or from the protection of the public health or welfare; and (3) Includes... transport, but not sell or offer for sale, such mammal and use any port, harbor or other place under the...

In situ measurements of oxygen dynamics in unsaturated archaeological deposits

DEFF Research Database (Denmark)

Matthiesen, Henning; Hollesen, Jørgen; Dunlop, Rory

2015-01-01

Oxygen is a key parameter in the degradation of archaeological material, but little is known of its dynamics in situ. In this study, 10 optical oxygen sensors placed in a 2 m deep test pit in the cultural deposits at Bryggen in Bergen have monitored oxygen concentrations every half hour for more ...... of the soil exceeds 10–15% vol, while oxygen dissolved in infiltrating rainwater is of less importance for the supply of oxygen in the unsaturated zone....... than a year. It is shown that there is a significant spatial and temporal variation in the oxygen concentration, which is correlated to measured soil characteristics, precipitation, soil water content and degradation of organic material. In these deposits oxygen typically occurs when the air content...

The genesis of the base metal ore deposit from Herja

Directory of Open Access Journals (Sweden)

Gheorghe Damian

2003-04-01

Full Text Available The Herja ore deposit is one of the most known of the Baia Mare Neogene metallogenetic district and is associated with a complex stock of Pannonian age. The hydrothermal alterations associated with the mineralizations are represented by: the propylitization, the argillization, the phyllic and potassic alteration. The monoascenedant character of the mineralizations is predominant. The magmatic intrusions have been sequential placed and have represented the heat, metals and hydrothermal solutions source. In the first stages of mineralization the hydrothermal solutions contain predominantly magmatic water and in the final stages the water is of connate and meteoric origin. According to the structural magmatic control, to the mineralogical composition and to the hydrothermal alterations, the Herja ore deposits are of a low sulphidation epithermal systems type.

Standard test method for determining atmospheric chloride deposition rate by wet candle method

CERN Document Server

American Society for Testing and Materials. Philadelphia

2002-01-01

1.1 This test method covers a wet candle device and its use in measuring atmospheric chloride deposition (amount of chloride salts deposited from the atmosphere on a given area per unit time). 1.2 Data on atmospheric chloride deposition can be useful in classifying the corrosivity of a specific area, such as an atmospheric test site. Caution must be exercised, however, to take into consideration the season because airborne chlorides vary widely between seasons. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

The effects of perspective-taking on prejudice: the moderating role of self-evaluation.

Science.gov (United States)

Galinsky, Adam D; Ku, Gillian

2004-05-01

Perspective-taking, by means of creating an overlap between self and other cognitive representations, has been found to effectively decrease stereotyping and ingroup favoritism. In the present investigation, the authors examined the potential moderating role of self-esteem on the effects of perspective-taking on prejudice. In two experiments, it was found that perspective-takers, but not control participants, with temporarily or chronically high self-esteem evaluated an outgroup more positively than perspective-takers with low self-esteem. This finding suggests an irony of perspective-taking: it builds off egocentric biases to improve outgroup evaluations. The discussion focuses on how debiasing intergroup thought is often best accomplished by working through the very processes that produced the bias in the first place.

A port-Hamiltonian approach to visual servo control of a pick and place system

NARCIS (Netherlands)

Dirksz, Daniel A.; Scherpen, Jacquelien M.A.

2012-01-01

In this paper we take a port-Hamiltonian approach to address the problem of image-based visual servo control of a pick and place system. We realize a closed-loop system, including the nonlinear camera dynamics, which is port-Hamiltonian. Although the closed-loop system is nonlinear, the resulting

Locating underground uranium deposits

International Nuclear Information System (INIS)

Felice, P.E.

1979-01-01

Underground uranium deposits are located by placing wires of dosimeters each about 5 to 18 mg/cm 2 thick underground in a grid pattern. Each dosimeter contains a phosphor which is capable of storing the energy of alpha particles. In each pair one dosimeter is shielded from alpha particles with more than 18 mg/cm 2 thick opaque material but not gamma and beta rays and the other dosimeter is shielded with less than 1 mg/cm 2 thick opaque material to exclude dust. After a period underground the dosimeters are heated which releases the stored energy as light. The amount of light produced from the heavily shielded dosimeter is subtracted from the amount of light produced from the thinly shielded dosimeter to give an indication of the location and quantity of uranium underground

THE ACTIVITIES OF THE NATIONAL BANK OF UKRAINE ON THE OPEN MARKET: OPERATION WITH CERTIFICATES OF DEPOSITS

Directory of Open Access Journals (Sweden)

Yuliia Harkusha

2016-06-01

Full Text Available In the article investigated the activities of the National Bank of Ukraine on the open market. The analysis of operations of the National Bank of Ukraine banks to raise funds placing deposit certificates. Defined impact operations of the central bank's own debt securities to trading volumes deposit certificates of the National Bank of Ukraine on the stock market and the credit activity of banks. Identified problems interest rate policy and the ways to overcome them. Key words: National Bank of Ukraine, certificates of deposits, open market, interest rate policy, banks, stock exchange. JEL: E 58

Strategy modulates spatial perspective-taking: evidence for dissociable disembodied and embodied routes

Science.gov (United States)

Gardner, Mark R.; Brazier, Mark; Edmonds, Caroline J.; Gronholm, Petra C.

2013-01-01

Previous research provides evidence for a dissociable embodied route to spatial perspective-taking that is under strategic control. The present experiment investigated further the influence of strategy on spatial perspective-taking by assessing whether participants may also elect to employ a separable “disembodied” route loading on inhibitory control mechanisms. Participants (N = 92) undertook both the “own body transformation” (OBT) perspective-taking task, requiring speeded spatial judgments made from the perspective of an observed figure, and a control task measuring ability to inhibit spatially compatible responses in the absence of a figure. Perspective-taking performance was found to be related to performance on the response inhibition control task, in that participants who tended to take longer to adopt a new perspective also tended to show a greater elevation in response times when inhibiting spatially compatible responses. This relationship was restricted to those participants reporting that they adopted the perspective of another by reversing left and right whenever confronted with a front-view figure; it was absent in those participants who reported perspective-taking by mentally transforming their spatial orientation to align with that of the figure. Combined with previously published results, these findings complete a double dissociation between embodied and disembodied routes to spatial perspective-taking, implying that spatial perspective-taking is subject to modulation by strategy, and suggesting that embodied routes to perspective-taking may place minimal demands on domain general executive functions. PMID:23964229

Healthy Places

Centers for Disease Control (CDC) Podcasts

Every person has a stake in environmental public health. As the environment deteriorates, so does the physical and mental health of the people within it. Healthy places are those designed and built to improve the quality of life for all people who live, work, worship, learn, and play within their borders -- where every person is free to make choices amid a variety of healthy, available, accessible, and affordable options. The CDC recognizes significant health issues and places that are vital in developing the Healthy Places program and provides examples in this report.

Upscaling of reactive flows

NARCIS (Netherlands)

Kumar, K.

2012-01-01

The thesis deals with the upscaling of reactive flows in complex geometry. The reactions which may include deposition or dissolution take place at a part of the boundary and depending on the size of the reaction domain, the changes in the pore structure that are due to the deposition process may or

Orientation specific deposition of mesoporous particles

Directory of Open Access Journals (Sweden)

Tomas Kjellman

2014-11-01

Full Text Available We present a protocol for a facile orientation specific deposition of plate-like mesoporous SBA-15 silica particles onto a surface (mesopores oriented normal to surface. A drop of an aqueous dispersion of particles is placed on the surface and water vaporizes under controlled relative humidity. Three requirements are essential for uniform coverage: particle dispersion should not contain aggregates, a weak attraction between particles and surface is needed, and evaporation rate should be low. Aggregates are removed by stirring/sonication. Weak attraction is realized by introducing cationic groups to the surface. Insight into the mechanisms of the so-called coffee stain effect is also provided.

ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING Places disponibles*/Places available **

CERN Multimedia

2003-01-01

* Etant donné le délai d'impression du Bulletin, ces places peuvent ne plus être disponibles au moment de sa parution. Veuillez consulter notre site Web pour avoir la dernière mise à jour. ** The number of places available may vary. Please check our Web site to find out the current availability. Des places sont disponibles dans les cours suivants : Places are available in the following courses : Java 2 Enterprise Edition - Part 2 : Enterprise JavaBeans : 8 - 10.10.2003 (3 days) FileMaker - niveau 1 : 9 & 10.10.03 (2 jours) EXCEL 2000 - niveau 1 : 20 & 22.10.03 (2 jours) CLEAN-2002 : Working in a Cleanroom : 23.10.03 (half day, free of charge) Plannification de projet avec MS-Project/Project Scheduling with MS-Project : 2 sessions : 23.10 & 4.11.03 and 18 &25.11.03 (2 jours/2 days - langue à définir/language to be defined) AutoCAD 2002 – Level 1 : 3, 4, 12, 13.11.03 (4 days) Introduction to Pspice : 4.11...

Design Of Vertical Take-Off And Landing VTOL Aircraft System

Directory of Open Access Journals (Sweden)

Win Ko Ko Oo

2017-04-01

Full Text Available Vertical Take Off and Landing Vehicles VTOL are the ones which can take off and land from the same place without need of long runway. This paper presents the design and implementation of tricopter mode and aircraft mode for VTOL aircraft system. Firstly the aircraft design is considered for VTOL mode. And then the mathematical model of the VTOL aircraft is applied to test stability. In this research the KK 2.1 flight controller is used for VTOL mode and aircraft mode. The first part is to develop the VTOL mode and the next part is the transition of VTOL mode to aircraft mode. This paper gives brief idea about numerous types of VTOLs and their advantages over traditional aircraftsand insight to various types of tricopter and evaluates their configurations.

Description of extreme-wave deposits on the northern coast of Bonaire, Netherlands Antilles

Science.gov (United States)

Watt, Steven G.; Jaffe, Bruce E.; Morton, Robert A.; Richmond, Bruce M.; Gelfencaum, Guy

2010-01-01

To develop a better understanding of the origins of extreme-wave deposits and to help assess the potential risk of future overwash events, a field mapping survey was conducted in November 2006 on the northern coast of Bonaire, Netherlands Antilles. Deposits were mapped and analyzed to help develop a systematic sedimentological approach to distinguish the type of extreme-wave event (tsunamis or storms) or combination of events that formed and modified the deposits over time. Extreme-wave deposits on the northern coast of Bonaire between Boka Onima and Boka Olivia have formed sand sheets, poly-modal ridge complexes, and boulder fields on a Pleistocene limestone platform 3?8 meters above sea level. The deposits exhibit characteristics that are consistent with both large storm and tsunami processes that often overlap one another. Sand sheets occur as low-relief features underlying and incorporated with boulder field deposits. The seaward edge of ridge complexes are deposited up to 70 m from the shoreline and can extend over 200 m inland. Over 600 clasts were measured in fields and range in size from coarse gravel to fine block, weigh up to 165 metric tons, and are placed over 280 m from the shoreline. Our analyses indicate that the deposits may have been produced by a combination of hurricane and tsunami events spanning 10s to 1000s of years. Comparing the different deposit morphologies between study sites highlights the importance of shoreline orientation to the distribution of extreme-wave deposits onshore. However, further investigation is required to fully understand the processes that have produced and modified these deposits over time.

20 CFR 703.207 - Kinds of negotiable securities that may be deposited; conditions of deposit; acceptance of deposits.

Science.gov (United States)

2010-04-01

... amount fixed by the Office under the regulations in this part shall deposit any negotiable securities... deposited; conditions of deposit; acceptance of deposits. 703.207 Section 703.207 Employees' Benefits... AND RELATED STATUTES INSURANCE REGULATIONS Insurance Carrier Security Deposit Requirements § 703.207...

Coronavirus and influenza virus proteolytic priming takes place in tetraspanin-enriched membrane microdomains.

Science.gov (United States)

Earnest, James T; Hantak, Michael P; Park, Jung-Eun; Gallagher, Tom

2015-06-01

Coronaviruses (CoVs) and low-pathogenicity influenza A viruses (LP IAVs) depend on target cell proteases to cleave their viral glycoproteins and prime them for virus-cell membrane fusion. Several proteases cluster into tetraspanin-enriched microdomains (TEMs), suggesting that TEMs are preferred virus entry portals. Here we found that several CoV receptors and virus-priming proteases were indeed present in TEMs. Isolated TEMs, when mixed with CoV and LP IAV pseudoparticles, cleaved viral fusion proteins to fusion-primed fragments and potentiated viral transductions. That entering viruses utilize TEMs as a protease source was further confirmed using tetraspanin antibodies and tetraspanin short hairpin RNAs (shRNAs). Tetraspanin antibodies inhibited CoV and LP IAV infections, but their virus-blocking activities were overcome by expressing excess TEM-associated proteases. Similarly, cells with reduced levels of the tetraspanin CD9 resisted CoV pseudoparticle transductions but were made susceptible by overproducing TEM-associated proteases. These findings indicated that antibodies and CD9 depletions interfere with viral proteolytic priming in ways that are overcome by surplus proteases. TEMs appear to be exploited by some CoVs and LP IAVs for appropriate coengagement with cell receptors and proteases. Enveloped viruses use their surface glycoproteins to catalyze membrane fusion, an essential cell entry step. Host cell components prime these viral surface glycoproteins to catalyze membrane fusion at specific times and places during virus cell entry. Among these priming components are proteases, which cleave viral surface glycoproteins, unleashing them to refold in ways that catalyze virus-cell membrane fusions. For some enveloped viruses, these proteases are known to reside on target cell surfaces. This research focuses on coronavirus and influenza A virus cell entry and identifies TEMs as sites of viral proteolysis, thereby defining subcellular locations of virus

Targeting condom distribution at high risk places increases condom utilization-evidence from an intervention study in Livingstone, Zambia

Directory of Open Access Journals (Sweden)

Sandøy Ingvild

2012-01-01

Full Text Available Abstract Background The PLACE-method presumes that targeting HIV preventive activities at high risk places is effective in settings with major epidemics. Livingstone, Zambia, has a major HIV epidemic despite many preventive efforts in the city. A baseline survey conducted in 2005 in places where people meet new sexual partners found high partner turnover and unprotected sex to be common among guests. In addition, there were major gaps in on-site condom availability. This study aimed to assess the impact of a condom distribution and peer education intervention targeting places where people meet new sexual partners on condom use and sexual risk taking among people socializing there. Methods The 2005 baseline survey assessed the presence of HIV preventive activities and sexual risk taking in places where people meet new sexual partners in Livingstone. One township was selected for a non-randomised intervention study on condom distribution and peer education in high risk venues in 2009. The presence of HIV preventive activities in the venues during the intervention was monitored by an external person. The intervention was evaluated after one year with a follow-up survey in the intervention township and a comparison township. In addition, qualitative interviews and focus group discussions were conducted. Results Young people between 17-32 years of age were recruited as peer educators, and 40% were females. Out of 72 persons trained before the intervention, 38 quit, and another 11 had to be recruited. The percentage of venues where condoms were reported to always be available at least doubled in both townships, but was significantly higher in the intervention vs. the control venues in both surveys (84% vs. 33% in the follow-up. There was a reduction in reported sexual risk taking among guests socializing in the venues in both areas, but reporting of recent condom use increased more among people interviewed in the intervention (57% to 84% than in the

Targeting condom distribution at high risk places increases condom utilization-evidence from an intervention study in Livingstone, Zambia.

Science.gov (United States)

Sandøy, Ingvild Fossgard; Zyaambo, Cosmas; Michelo, Charles; Fylkesnes, Knut

2012-01-05

The PLACE-method presumes that targeting HIV preventive activities at high risk places is effective in settings with major epidemics. Livingstone, Zambia, has a major HIV epidemic despite many preventive efforts in the city. A baseline survey conducted in 2005 in places where people meet new sexual partners found high partner turnover and unprotected sex to be common among guests. In addition, there were major gaps in on-site condom availability. This study aimed to assess the impact of a condom distribution and peer education intervention targeting places where people meet new sexual partners on condom use and sexual risk taking among people socializing there. The 2005 baseline survey assessed the presence of HIV preventive activities and sexual risk taking in places where people meet new sexual partners in Livingstone. One township was selected for a non-randomised intervention study on condom distribution and peer education in high risk venues in 2009. The presence of HIV preventive activities in the venues during the intervention was monitored by an external person. The intervention was evaluated after one year with a follow-up survey in the intervention township and a comparison township. In addition, qualitative interviews and focus group discussions were conducted. Young people between 17-32 years of age were recruited as peer educators, and 40% were females. Out of 72 persons trained before the intervention, 38 quit, and another 11 had to be recruited. The percentage of venues where condoms were reported to always be available at least doubled in both townships, but was significantly higher in the intervention vs. the control venues in both surveys (84% vs. 33% in the follow-up). There was a reduction in reported sexual risk taking among guests socializing in the venues in both areas, but reporting of recent condom use increased more among people interviewed in the intervention (57% to 84%) than in the control community (55% to 68%). It is likely that the

Acid deposition and assessment of its critical load for the environmental health of waterbodies in a subtropical watershed, China

Science.gov (United States)

Jia, Junjie; Gao, Yang

2017-12-01

Atmospheric acidic deposition in subtropical watersheds poses an environmental risk of causing acidification of aquatic ecosystems. In this study, we evaluated the frequency of acid deposition in a subtropical forest ecosystem and the associated critical loads of acidity for a sensitive aquatic ecosystem. We found that out of 132 rainfall events, 33(25%) were acidic rainfall occurrences. Estimated wet acid deposition (2282.78 eq·ha-1·yr-1), consistent with SO42- and NH4+ deposition, was high in spring and summer and low in autumn and winter. Waterbodies surrounded by mixed wood and citrus orchard experience severe acidification, mostly from S deposition because acidic deposition exceeds the corresponding critical loads of acidity. Modifications that take acid rain deposition into consideration are needed for land-use and agricultural management strategies to improve the environmental health of waterbodies in subtropical watersheds.

Chemical evolution of Miocene wood: Example from the Belchatow brown coal deposit, central Poland

Science.gov (United States)

Drobniak, A.; Mastalerz, Maria

2006-01-01

Miocene conifer wood samples from the Belchatow brown coal deposit in Poland were studied in order to discuss a range of chemical variations that occur as a result of biochemical coalification. Petrographic analysis, ultimate analysis, electron microprobe technique, and FTIR spectroscopy were used in this study. Our data show several progressive trends in functional groups distribution that take place during the wood transformation from group 1 to group 4, such as an overall increase in aromaticity, an increase in lignin/cellulose ratio, and an increase in oxygen functionalities. Other observations include an increase in aliphatic stretching and bending functionalities from groups 1 to 3; followed by a decrease in the wood of group 4; appearance of aliphatic out-of-plane bands in group 3 and increase in group 4; an increase in CH2/CH3 in group 4 compared to the other groups; and decrease in O-H groups in group 4 compared to other groups. These observations, together with other chemical and petrological observations, indicate that the progressive elimination of cellulose and modification of lignin are dominant processes of the wood transformation. ?? 2005 Elsevier B.V. All rights reserved.

Take Charge. Take the Test. PSA (:30)

Centers for Disease Control (CDC) Podcasts

As part of the Take Charge. Take the Test. campaign, this 30 second PSA encourages African American women to get tested for HIV. Locations for a free HIV test can be found by visiting hivtest.org/takecharge or calling 1-800-CDC-INFO (1-800-232-4636).

One for You, One for Me: Humans' Unique Turn-Taking Skills.

Science.gov (United States)

Melis, Alicia P; Grocke, Patricia; Kalbitz, Josefine; Tomasello, Michael

2016-07-01

Long-term collaborative relationships require that any jointly produced resources be shared in mutually satisfactory ways. Prototypically, this sharing involves partners dividing up simultaneously available resources, but sometimes the collaboration makes a resource available to only one individual, and any sharing of resources must take place across repeated instances over time. Here, we show that beginning at 5 years of age, human children stabilize cooperation in such cases by taking turns across instances of obtaining a resource. In contrast, chimpanzees do not take turns in this way, and so their collaboration tends to disintegrate over time. Alternating turns in obtaining a collaboratively produced resource does not necessarily require a prosocial concern for the other, but rather requires only a strategic judgment that partners need incentives to continue collaborating. These results suggest that human beings are adapted for thinking strategically in ways that sustain long-term cooperative relationships and that are absent in their nearest primate relatives. © The Author(s) 2016.

Security lapses. Critics urge execs to take safety issues more seriously.

Science.gov (United States)

Carlson, Joe

2011-10-17

Violence in hospitals remains high a year after the Joint Commission's Sentinel Event Alert for it, but experts say CEOs can reduce violence by encouraging staff to report incidents and planning for when the unthinkable strikes. "I think we'd all be better served to give a little more forethought to what you would do if that kind of event takes place," says David Banks, left, of Forida Hospital.

Ensemble place codes in hippocampus: CA1, CA3, and dentate gyrus place cells have multiple place fields in large environments.

Directory of Open Access Journals (Sweden)

Eunhye Park

Full Text Available Previously we reported that the hippocampus place code must be an ensemble code because place cells in the CA1 region of hippocampus have multiple place fields in a more natural, larger-than-standard enclosure with stairs that permitted movements in 3-D. Here, we further investigated the nature of hippocampal place codes by characterizing the spatial firing properties of place cells in the CA1, CA3, and dentate gyrus (DG hippocampal subdivisions as rats foraged in a standard 76-cm cylinder as well as a larger-than-standard box (1.8 m×1.4 m that did not have stairs or any internal structure to permit movements in 3-D. The rats were trained to forage continuously for 1 hour using computer-controlled food delivery. We confirmed that most place cells have single place fields in the standard cylinder and that the positional firing pattern remapped between the cylinder and the large enclosure. Importantly, place cells in the CA1, CA3 and DG areas all characteristically had multiple place fields that were irregularly spaced, as we had reported previously for CA1. We conclude that multiple place fields are a fundamental characteristic of hippocampal place cells that simplifies to a single field in sufficiently small spaces. An ensemble place code is compatible with these observations, which contradict any dedicated coding scheme.

Multiphysics simulation of thermal phenomena in direct laser metal powder deposition

CSIR Research Space (South Africa)

Pityana, SL

2016-11-01

Full Text Available presents on two dimensional multi-physics models to describe the physical mechanism of heat transfer, melting and solidification that take place during and post laser-powder interaction. The simulated transient temperature profile, the geometrical features...

Interpretation of plasma impurity deposition probes. Analytic approximation

Science.gov (United States)

Stangeby, P. C.

1987-10-01

Insertion of a probe into the plasma induces a high speed flow of the hydrogenic plasma to the probe which, by friction, accelerates the impurity ions to velocities approaching the hydrogenic ion acoustic speed, i.e., higher than the impurity ion thermal speed. A simple analytic theory based on this effect provides a relation between impurity fluxes to the probe Γimp and the undisturbed impurity ion density nimp, with the hydrogenic temperature and density as input parameters. Probe size also influences the collection process and large probes are found to attract a higher flux density than small probes in the same plasma. The quantity actually measured, cimp, the impurity atom surface density (m-2) net-deposited on the probe, is related to Γimp and thus to nimp by taking into account the partial removal of deposited material caused by sputtering and the redeposition process.

Dilemma of deposit insurance policy in ASEAN countries: Does it promote banking industry stability or moral hazard?

Directory of Open Access Journals (Sweden)

Suhal Kusairi

2018-03-01

Full Text Available The goal of this article is to investigate the influence of deposit insurance policy on the stability of the banking industry. Stability is measured by the ratio of retail deposits to total assets and the ratio of loans to total assets to cover both positive and negative impacts, and deposit insurance policy is assessed in various stages. The survey uses a data panel of 127 commercial banks from 2000 to 2013 in six member countries of the Association of Southeast Asian Nations (ASEAN. Using a dynamic panel data investigation, we obtain results showing that the implementation of deposit insurance policy negatively affects the ratio of retail deposits to total assets while positively influencing the ratio of loans to total assets. This is an important finding, as it implies that deposit insurance policy causes bank managers to take greater risks to increase their returns, rather than increasing the confidence level of depositors and ultimately increasing total deposits. This result is important for regulators as they evaluate deposit insurance policy and anticipate any negative outcomes that might follow.

Distribution and sedimentary arrangement of carbon in South African proterozoic placer deposits

International Nuclear Information System (INIS)

Minter, W.E.L.

1981-01-01

Carbon, which occurs as grains, films, and thin seams in Witwatersrand Proterozoic placer deposits, is generally confined to carbon-seam reefs that were deposited in distal environments. The distribution of carbon on paleosurfaces, on sedimentary accumulation surfaces like pebble layers, on trough-shaped bedforms of pi-crossbedded units and foresets, and on the winnowed top of placer sediments implies that its growth took place contemporaneously with placer deposition in an aquatic fluvial environment. The areal distribution of carbon seams in distal environments is patchy, and its sparsity or total absence in some areas does not affect either the gold or the uranium content of the placer. High gold and uranium contents that appear to be associated with carbon seams are at the base of the reef because that position represents both the stable consolidated paleosurface upon which the plant material anchored itself and also the surface of bedload concentration

Chemically and size-resolved particulate matter dry deposition on stone and surrogate surfaces inside and outside the low emission zone of Milan: application of a newly developed "Deposition Box".

Science.gov (United States)

Ferrero, Luca; Casati, Marco; Nobili, Lara; D'Angelo, Luca; Rovelli, Grazia; Sangiorgi, Giorgia; Rizzi, Cristiana; Perrone, Maria Grazia; Sansonetti, Antonio; Conti, Claudia; Bolzacchini, Ezio; Bernardi, Elena; Vassura, Ivano

2018-04-01

The collection of atmospheric particles on not-filtering substrates via dry deposition, and the subsequent study of the particle-induced material decay, is trivial due to the high number of variables simultaneously acting on the investigated surface. This work reports seasonally resolved data of chemical composition and size distribution of particulate matter deposed on stone and surrogate surfaces obtained using a new method, especially developed at this purpose. A "Deposition Box" was designed allowing the particulate matter dry deposition to occur selectively removing, at the same time, variables that can mask the effect of airborne particles on material decay. A pitched roof avoided rainfall and wind variability; a standardised gentle air exchange rate ensured a continuous "sampling" of ambient air leaving unchanged the sampled particle size distribution and, at the same time, leaving quite calm condition inside the box, allowing the deposition to occur. Thus, the "Deposition Box" represents an affordable tool that can be used complementary to traditional exposure systems. With this system, several exposure campaigns, involving investigated stone materials (ISMs) (Carrara Marble, Botticino limestone, Noto calcarenite and Granite) and surrogate (Quartz, PTFE, and Aluminium) substrates, have been performed in two different sites placed in Milan (Italy) inside and outside the low emission zone. Deposition rates (30-90 μg cm -2  month -1 ) showed significant differences between sites and seasons, becoming less evident considering long-period exposures due to a positive feedback on the deposition induced by the deposited particles. Similarly, different stone substrates influenced the deposition rates too. The collected deposits have been observed with optical and scanning electron microscopes and analysed by ion chromatography. Ion deposition rates were similar in the two sites during winter, whereas it was greater outside the low emission zone during summer and

Continuing bonds and place.

Science.gov (United States)

Jonsson, Annika; Walter, Tony

2017-08-01

Where do people feel closest to those they have lost? This article explores how continuing bonds with a deceased person can be rooted in a particular place or places. Some conceptual resources are sketched, namely continuing bonds, place attachment, ancestral places, home, reminder theory, and loss of place. The authors use these concepts to analyze interview material with seven Swedes and five Britons who often thought warmly of the deceased as residing in a particular place and often performing characteristic actions. The destruction of such a place, by contrast, could create a troubling, haunting absence, complicating the deceased's absent-presence.

Cobalt—Styles of deposits and the search for primary deposits

Science.gov (United States)

Hitzman, Murray W.; Bookstrom, Arthur A.; Slack, John F.; Zientek, Michael L.

2017-11-30

Cobalt (Co) is a potentially critical mineral. The vast majority of cobalt is a byproduct of copper and (or) nickel production. Cobalt is increasingly used in magnets and rechargeable batteries. More than 50 percent of primary cobalt production is from the Central African Copperbelt. The Central African Copperbelt is the only sedimentary rock-hosted stratiform copper district that contains significant cobalt. Its presence may indicate significant mafic-ultramafic rocks in the local basement. The balance of primary cobalt production is from magmatic nickel-copper and nickel laterite deposits. Cobalt is present in several carbonate-hosted lead-zinc and copper districts. It is also variably present in Besshi-type volcanogenic massive sulfide and siliciclastic sedimentary rock-hosted deposits in back arc and rift environments associated with mafic-ultramafic rocks. Metasedimentary cobalt-copper-gold deposits (such as Blackbird, Idaho), iron oxide-copper-gold deposits, and the five-element vein deposits (such as Cobalt, Ontario) contain different amounts of cobalt. None of these deposit types show direct links to mafic-ultramafic rocks; the deposits may result from crustal-scale hydrothermal systems capable of leaching and transporting cobalt from great depths. Hydrothermal deposits associated with ultramafic rocks, typified by the Bou Azzer district of Morocco, represent another type of primary cobalt deposit.In the United States, exploration for cobalt deposits may focus on magmatic nickel-copper deposits in the Archean and Proterozoic rocks of the Midwest and the east coast (Pennsylvania) and younger mafic rocks in southeastern and southern Alaska; also, possibly basement rocks in southeastern Missouri. Other potential exploration targets include—The Belt-Purcell basin of British Columbia (Canada), Idaho, Montana, and Washington for different styles of sedimentary rock-hosted cobalt deposits;Besshi-type VMS deposits, such as the Greens Creek (Alaska) deposit and

Place-Based Education: What Is Its Place in the Social Studies Classroom?

Science.gov (United States)

Resor, Cynthia Williams

2010-01-01

Place-based education is a growing trend in education. This article defines place-based education and briefly examines its use across the disciplines. So as to better understand the wider concept, meanings of the geographical term "place" are analyzed. Place-based education in a social studies classroom is examined using two hypothetical…

Low-Vacuum Deposition of Glutamic Acid and Pyroglutamic Acid: A Facile Methodology for Depositing Organic Materials beyond Amino Acids.

Science.gov (United States)

Sugimoto, Iwao; Maeda, Shunsaku; Suda, Yoriko; Makihara, Kenji; Takahashi, Kazuhiko

2014-01-01

Thin layers of pyroglutamic acid (Pygl) have been deposited by thermal evaporation of the molten L-glutamic acid (L-Glu) through intramolecular lactamization. This deposition was carried out with the versatile handmade low-vacuum coater, which was simply composed of a soldering iron placed in a vacuum degassing resin chamber evacuated by an oil-free diaphragm pump. Molecular structural analyses have revealed that thin solid film evaporated from the molten L-Glu is mainly composed of L-Pygl due to intramolecular lactamization. The major component of the L-Pygl was in β-phase and the minor component was in γ-phase, which would have been generated from partial racemization to DL-Pygl. Electron microscopy revealed that the L-Glu-evaporated film generally consisted of the 20 nm particulates of Pygl, which contained a periodic pattern spacing of 0.2 nm intervals indicating the formation of the single-molecular interval of the crystallized molecular networks. The DL-Pygl-evaporated film was composed of the original DL-Pygl preserving its crystal structures. This methodology is promising for depositing a wide range of the evaporable organic materials beyond amino acids. The quartz crystal resonator coated with the L-Glu-evaporated film exhibited the pressure-sensing capability based on the adsorption-desorption of the surrounding gas at the film surface.

Total dissolved atmospheric nitrogen deposition in the anoxic Cariaco basin

Science.gov (United States)

Rasse, R.; Pérez, T.; Giuliante, A.; Donoso, L.

2018-04-01

Atmospheric deposition of total dissolved nitrogen (TDN) is an important source of nitrogen for ocean primary productivity that has increased since the industrial revolution. Thus, understanding its role in the ocean nitrogen cycle will help assess recent changes in ocean biogeochemistry. In the anoxic Cariaco basin, the place of the CARIACO Ocean Time-Series Program, the influence of atmospherically-deposited TDN on marine biogeochemistry is unknown. In this study, we measured atmospheric TDN concentrations as dissolved organic (DON) and inorganic (DIN) nitrogen (TDN = DIN + DON) in atmospheric suspended particles and wet deposition samples at the northeast of the basin during periods of the wet (August-September 2008) and dry (March-April 2009) seasons. We evaluated the potential anthropogenic N influences by measuring wind velocity and direction, size-fractionated suspended particles, chemical traces and by performing back trajectories. We found DIN and DON concentration values that ranged between 0.11 and 0.58 μg-N m-3 and 0.11-0.56 μg-N m-3 in total suspended particles samples and between 0.08 and 0.54 mg-N l-1 and 0.02-1.3 mg-N l-1 in wet deposition samples, respectively. Continental air masses increased DON and DIN concentrations in atmospheric suspended particles during the wet season. We estimate an annual TDN atmospheric deposition (wet + particles) of 3.6 × 103 ton-N year-1 and concluded that: 1) Atmospheric supply of TDN plays a key role in the C and N budget of the basin because replaces a fraction of the C (20% by induced primary production) and N (40%) removed by sediment burial, 2) present anthropogenic N could contribute to 30% of TDN atmospheric deposition in the basin, and 3) reduced DON (gas + particles) should be a significant component of bulk N deposition.

Influence of In{sup 3+}-doping and Ag{sup 0}-depositing on the visible-light-induced photocatalytic activity of TiO{sub 2}

Energy Technology Data Exchange (ETDEWEB)

Zhang, Pengfei, E-mail: zpf@mail.csu.edu.cn [College of Chemistry and Chemical Engineering, Central South University, Changsha, Hunan, 410083 (China); Li, Xiaowei; Wu, Xingke [College of Chemistry and Chemical Engineering, Central South University, Changsha, Hunan, 410083 (China); Zhao, Tianxiang [College of Physical Science and Technology, Central South University, Changsha, 410083 (China); Wen, Lishi [Metal Graduate School, Chinese Academy of Sciences, Shenyang, Liaoning, 110016 (China)

2016-07-15

In{sup 3+}-doped and Ag{sup 0}-deposited TiO{sub 2} (Ag{sup 0}/In{sup 3+}/TiO{sub 2}), In{sup 3+}-doped TiO{sub 2} (In{sup 3+}/TiO{sub 2}), Ag{sup 0}-deposited TiO{sub 2} (Ag{sup 0}/TiO{sub 2}), and pure TiO{sub 2} were synthesized via sol–gel and photocatalytic reduction route. The as-prepared samples were characterized by X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET), scanning electron microscopy (SEM), X-ray photoelectron spectroscope (XPS), UV–visible absorption spectra techniques and photoluminescence (PL) emission spectra, and their visible-light-induced photocatalytic activity was evaluated by the decomposition of methylene blue (MB). Modifying of TiO{sub 2} by making Ag{sup 0} deposit on its surface extended the absorption limit of TiO{sub 2} from 390 to 464 nm due to the broadening of surface plasmon absorption, and promoted charge separation of photoinduced electrons (e{sup –}) and holes (h{sup +}) because of the Schottky barrier at Ag{sup 0}–TiO{sub 2} interface. Modifying of TiO{sub 2} by making In{sup 3+} (r = 81 pm) to take the place of Ti{sup 4+} (r = 68 pm) in its lattice extended the absorption limit of TiO{sub 2} from 390 to 602 nm by the donor-doped energy level (2.06 eV) formed in the forbidden band of TiO{sub 2} (3.18 eV), and promoted charge separation of photoinduced e{sup –}/h{sup +} by the decrease of crystallite size, increase of anatase content and formation of point defects (oxygen vacancy and titanium interstitial) resulting from the local expansive lattice distortion of TiO{sub 2}. Because of their synergistic effects, co-modifying of TiO{sub 2} by making both In{sup 3+} take the place of Ti{sup 4+} in its lattice and Ag{sup 0} deposit on its surface extended the absorption limit of TiO{sub 2} from 390 to 670 nm, and promoted the charge separation of photoinduced e{sup –}/h{sup +} more efficiently. The co-modifying's synergistic effects made Ag{sup 0}/In{sup 3+}/TiO{sub 2} exhibit distinctly higher visible

Nanocharacterization of TiN films obtained by Ion Vapor deposition

International Nuclear Information System (INIS)

Lara O, L; Jerez A, M; Morantes M, L; Plata, A; Torres, Y; Lasprilla, M; Zhabon, V

2011-01-01

We evaluate and characterize the surface at the nanoscale level and take into account the temperature variation effect in the process of plasma ion deposition for H13 steel samples coated by Titanium Nitride (TiN). The interferometric microscopy and atomic force microscopy (AFM) were used to measure the film to analyze the variation of structural and morphological properties of nanofilms that depend on the temperature of sustrate.

Numerical modelling of laser rapid prototyping by fusion wire deposit

OpenAIRE

Arbaoui , Larbi; Masse , J.E.; Barrallier , Laurent; Mocellin , Katia

2010-01-01

International audience; A finite element model has been developed to simulate an innovative laser rapid prototyping process. Several numerical developments have been implemented in order to simulate the main steps of the rapid prototyping process: injection, heating, phase change and deposit. The numerical model also takes into account different phenomena: surface tension in the liquid state, asborptivity and plasma effects during materiallaser interaction. The threedimensional model is based...

Place-Specific Computing

DEFF Research Database (Denmark)

Messeter, Jörn; Johansson, Michael

project place- specific computing is explored through design oriented research. This article reports six pilot studies where design students have designed concepts for place-specific computing in Berlin (Germany), Cape Town (South Africa), Rome (Italy) and Malmö (Sweden). Background and arguments...... for place-specific computing as a genre of interaction design are described. A total number of 36 design concepts designed for 16 designated zones in the four cities are presented. An analysis of the design concepts is presented indicating potentials, possibilities and problems as directions for future......An increased interest in the notion of place has evolved in interaction design. Proliferation of wireless infrastructure, developments in digital media, and a ‘spatial turn’ in computing provides the base for place-specific computing as a suggested new genre of interaction design. In the REcult...

Open channels in fractures maintained by deposition and erosion of colloids

International Nuclear Information System (INIS)

Kessler, J.H.; Hunt, J.R.

1993-01-01

Material in the colloidal size range is present in many natural groundwater systems at existing or proposed radioactive waste storage locations. Colloids initially suspended in the water in fractures can deposit onto the fracture surfaces, and will partially or fully clog the fracture. The amount of clogging will depend on whether the deposited colloidal material can erode from the fracture surfaces. If the fracture remains only partially clogged the unclogged regions take the form of open channels. The purpose of this paper is to assess under what conditions these open channels form. An analytical model of a steady state, average open channel width is presented which is a function of the fluid flow rate and viscosity, fracture aperture, and the permeability and shear strength of the deposited colloidal material. The implications of the presence of open channels for colloidal transport is also discussed. However, for most repository conditions the fractures are expected to fully clog with colloids

Remembering the Roots of Place Meanings for Place-Based Outdoor Education

Science.gov (United States)

Hutson, Garrett

2011-01-01

Place-based education seeks to connect learners to local environments through a variety of strategies that increase environmental awareness and connectedness to particular parts of the world. The concept of place meanings encompasses the subjective ways people construct meaning through their experiences with an array of settings. Place meanings…

‘All have a place in God’s imaret’

DEFF Research Database (Denmark)

Willert, Trine Stauning

, the building of a state-funded mosque has been debated in the public sphere with the loudest voices being nationalistic and ethno-religious protests against a mosque. Parallel to these expressions of religious intolerance several popular historical novels in the mid- and late 2000s have treated the issue......, Macedonia, the Black Sea region, Thrace and Asia Minor. The novels take place over long time spans from the mid nineteenth century to the dawn of the twenty-first century, implying deep societal changes brought about by the dissolution of the Ottoman Empire and the effects of modernization. Central...

Reconnaissance for radioactive deposits in Alaska, 1953

Science.gov (United States)

Matzko, John J.; Bates, Robert G.

1955-01-01

During the summer of 1953 the areas investigated for radioactive deposits in Alaska were on Nikolai Creek near Tyonek and on Likes Creek near Seward in south-central Alaska where carnotite-type minerals had been reported; in the headwaters of the Peace River in the eastern part of the Seward Peninsula and at Gold Bench on the South Fork of the Koyukuk River in east-central Alaska, where uranothorianite occurs in places associated with base metal sulfides and hematite; in the vicinity of Port Malmesbury in southeastern Alaska to check a reported occurrence of pitchblende; and, in the Miller House-Circle Hot Springs area of east-central Alaska where geochemical studies were made. No significant lode deposits of radioactive materials were found. However, the placer uranothorianite in the headwaters of the Peace River yet remains as an important lead to bedrock radioactive source materials in Alaska. Tundra cover prevents satisfactory radiometric reconnaissance of the area, and methods of geochemical prospecting such as soil and vegetation sampling may ultimately prove more fruitful in the search for the uranothorianite-sulfide lode source than geophysical methods.

Photoelectrochemical energy conversion obtained with ultrathin organo-metallic-chemical-vapor-deposition layer of FeS[sub 2] (pyrite) on TiO[sub 2

Energy Technology Data Exchange (ETDEWEB)

Ennaoui, A.; Fiechter, S.; Tributsch, H. (Abt. Solare Energetik, Hahn-Meitner-Inst., D-1000 Berlin 39 (Germany)); Giersig, M.; Vogel, R.; Weller, H. (Abt. Photochemie, Hahn-Meitner-Inst., D-1000 Berlin 39 (Germany))

1992-09-01

Ultrathin (10 to 20 nm thick), polycrystalline films of FeS[sub 2] (pyrite) were grown on TiO[sub 2] (anatase) by chemical vapor deposition. The FeS[sub 2] films were characterized using optical absorption and high-resolution electron microscopy. Photoelectrochemical solar cells, using TiO[sub 2] (anatase) coated with FeS[sub 2] ultrathin films, generated high open-circuit photo-voltages, of up to 600 mV, compared with a single crystal of pyrite electrode (200 mV). The photoelectrochemical behavior shows a strong dependence of photovoltage and photocurrent on the pH of the solution. This paper reports that it is explained by electron injection from the conduction band of FeS[sub 2] to the conduction band of TiO[sub 2]. Regeneration of holes is taking place by electron transfer from the redox system in the electrolyte.

Learning strategy preference of 5XFAD transgenic mice depends on the sequence of place/spatial and cued training in the water maze task.

Science.gov (United States)

Cho, Woo-Hyun; Park, Jung-Cheol; Chung, ChiHye; Jeon, Won Kyung; Han, Jung-Soo

2014-10-15

Learning strategy preference was assessed in 5XFAD mice, which carry 5 familial Alzheimer's disease (AD) mutations. Mice were sequentially trained in cued and place/spatial versions of the water maze task. After training, a strategy preference test was conducted in which mice were required to choose between the spatial location where the platform had previously been during the place/spatial training, and a visible platform in a new location. 5XFAD and non-transgenic control mice showed equivalent escape performance in both training tasks. However, in the strategy preference test, 5XFAD mice preferred a cued strategy relative to control mice. When the training sequence was presented in the reverse order (i.e., place/spatial training before cued training), 5XFAD mice showed impairments in place/spatial training, but no differences in cued training or in the strategy preference test comparing to control. Analysis of regional Aβ42 deposition in brains of 5XFAD mice showed that the hippocampus, which is involved in the place/spatial learning strategy, had the highest levels of Aβ42 and the dorsal striatum, which is involved in cued learning strategy, showed a small increase in Aβ42 levels. The effect of training protocol order on performance, and regional differences in Aβ42 deposition observed in 5XFAD mice, suggest differential functional recruitment of brain structures related to learning in healthy and AD individuals. Copyright © 2014 Elsevier B.V. All rights reserved.

Study of the reduced indium oxide (In2O3)/mc-silicon:hydrogen interface by means of factor analysis

NARCIS (Netherlands)

Nijs, de J.M.M.; Aarts, R.G.K.M.

1991-01-01

The overgrowth of an In2O3 layer by a µc-Si:H layer, deposited by means of plasma-enhanced chemical vapour deposition, will inflict the reduction of the In2O3. AES is combination with Ar+ depth profiling is used for the study of the interfacial deterioration that takes place. The results of a factor

IMPROVING DEPOSIT POLICY BANK ON THE BASIS OF ANALYSIS OF THE INFLUENCE OF DEPOSIT PORTFOLIO STRUCTURE ON FORMATION OF INVESTMENT RESOURCE

Directory of Open Access Journals (Sweden)

Viadrova I.

2018-01-01

. The main problems, which arise in the process of deposit-taking banks’ activities, including lack of resource support for active operations to ensure the country’s economic development and ways to improve deposit policy. Conclusions. The basis for the formation of the deposit portfolio structure is the implementation of effective deposit policy, which is extremely important for banking institutions at the present stage of development, as it promotes the improvement of banking activity in the process of attracting funds as an investment resource. The savings of Ukraine’s population have significant potential for further investment. That is why there is a need to build the infrastructure of the financial sector, improve legislation, and increase the overall financial literacy of the population, which should become a prerequisite for investment activity in Ukraine. In today’s conditions of development of the national economy, the question of improving the financial mechanism of converting savings into investment resources is very important, as the investment potential, which is concentrated in the savings of the population, is significant for expanding the boundaries of investment activity in the country.

In vivo quantitation of platelet deposition on human peripheral arterial bypass grafts using indium-111-labeled platelets. Effect of dipyridamole and aspirin

International Nuclear Information System (INIS)

Pumphrey, C.W.; Chesebro, J.H.; Dewanjee, M.K.; Wahner, H.W.; Hollier, L.H.; Pairolero, P.C.; Fuster, V.

1983-01-01

Indium-111-labeled autologous platelets, injected 48 hours after operation, were used to evaluate the thrombogenicity of prosthetic material and the effect of platelet inhibitor therapy in vivo. Dacron double-velour (Microvel) aortofemoral artery bifurcation grafts were placed in 16 patients and unilateral polytetrafluoroethylene femoropopliteal grafts were placed in 10 patients. Half the patients in each group received platelet inhibitors before operation (dipyridamole, 100 mg 4 times a day) and after operation (dipyridamole, 75 mg, and acetylsalicylic acid, 325 mg 3 times a day); the rest of the patients served as control subjects. Five-minute scintigrams of the graft region were taken with a gamma camera interfaced with a computer 48, 72, and 96 hours after injection of the labeled platelets. Platelet deposition was estimated from the radioactivities of the grafts and expressed as counts per 100 pixels per microcurie injected. Dipyridamole and aspirin therapy significantly reduced the number of platelets deposited on Dacron grafts and prevented platelet accumulation over 3 days. With the small amount of platelet deposition on polytetrafluoroethylene femoropopliteal artery grafts even in control patients, platelet inhibitor therapy had no demonstrable effect on platelet deposition on these grafts. It is concluded that (1) platelet deposition on vascular grafts in vivo can be quantitated by noninvasive methods, and (2) dipyridamole and aspirin therapy reduced platelet deposition on Dacron aortofemoral artery grafts

Healthy Places

Centers for Disease Control (CDC) Podcasts

2007-04-10

Every person has a stake in environmental public health. As the environment deteriorates, so does the physical and mental health of the people within it. Healthy places are those designed and built to improve the quality of life for all people who live, work, worship, learn, and play within their borders -- where every person is free to make choices amid a variety of healthy, available, accessible, and affordable options. The CDC recognizes significant health issues and places that are vital in developing the Healthy Places program and provides examples in this report.  Created: 4/10/2007 by CDC National Center for Environmental Health.   Date Released: 4/13/2007.

Using isotope geochemistry to discuss the role of crust-mantle interaction in the formation of endogenetic mega-deposits

International Nuclear Information System (INIS)

Zhang Lisheng

2005-01-01

Isotope characteristics of some mega-deposits from literature and new results on twenty deposits (ten of them are mega-deposits) show that there exists traces of crust-mantle interaction. It has been established that the interaction all took place in the mantle under many situations. The theory of isotope geochemistry on the genesis of mega-deposits has been discussed. According to the theory, these deposits are a kind of special phenomena, but they have a common factor, i.e. mantle metasomatism produced by the crust-mantle interaction in the mantle no matter what the ore-forming elements diversity may be. The granites with great accumulation of uncompatible elements can be considered as the analogues of mega-deposits. According to the statistical results, it is possible that they formed at a period before about 2 Ga during which the recycling of the materials was accompanied with the obvious crust-mantle interaction and can produce the volatile components which are poor in the mantle. (authors)

Taking Your iPhoto '11 to the Max

CERN Document Server

Grothaus, Michael

2011-01-01

Taking Your iPhoto '11 to the Max walks users through Apple's most popular software application in the iLife suite - iPhoto. This book helps readers use iPhoto to its fullest to organize and create digital memories and keepsakes. * Learn all about Apple's newest version of iPhoto - iPhoto '11 * Explore iPhoto, one menu button at a time * Walk-through tutorials guide you step-by-step What you'll learn * How to import existing photo libraries from popular Windows applications * How to organize and edit your photos * How to tag your photos using iPhoto's Faces and Places features * How to create

Discrete deposition of hydroxyapatite nanoparticles on a titanium implant with predisposing substrate microtopography accelerated osseointegration

International Nuclear Information System (INIS)

Nishimura, Ichiro; Huang Yuhong; Butz, Frank; Ogawa, Takahiro; Lin, Audrey; Wang, Chiachien Jake

2007-01-01

We report here a new versatile method to deposit discrete hydroxyapatite (HA) nanoparticles on a titanium (Ti) implant with predisposing substrate microtopography, which exhibited an unexpectedly robust biological effect. Commercially pure Ti substrates were treated with 3-aminopropyltriethoxysilane, on which HA nanoparticles (20 nm) were deposited and chemically bonded to TiO 2 . The HA deposition rate was linearly related to the treatment time and HA nanoparticles were deposited on up to 50% of the substrate surface. As a result, the discrete deposition of HA nanoparticles generated novel 20-40 nm nanotopography on the Ti substrate with microtopography that was smooth (turned) or roughened by double acid etching (DAE). The experimental implants with or without HA nanoparticles were surgically placed in rat femur and an implant push-in test was performed after two weeks of healing. The deposition of HA nanoparticles on the DAE surface increased the mechanical withstanding load by 129% and 782% as compared to the control DAE and turned implants, respectively. Micro-computed tomography-based 3D bone morphometry revealed equivalent bone volumes around the DAE implant with or without HA nanoparticles. These data suggest that the discrete deposition of HA nanoparticles accelerates the early osseointegration process, likely through increased shear bonding strengths

Discrete deposition of hydroxyapatite nanoparticles on a titanium implant with predisposing substrate microtopography accelerated osseointegration

Energy Technology Data Exchange (ETDEWEB)

Nishimura, Ichiro [UCLA School of Dentistry, Weintraub Center for Reconstructive Biotechnology and Division of Advanced Prosthodontics, Biomaterials and Hospital Dentistry, Los Angeles, CA (United States); Huang Yuhong [Chemat Technology, Incorporated, Northridge, CA (United States); Butz, Frank [UCLA School of Dentistry, Weintraub Center for Reconstructive Biotechnology and Division of Advanced Prosthodontics, Biomaterials and Hospital Dentistry, Los Angeles, CA (United States); Ogawa, Takahiro [UCLA School of Dentistry, Weintraub Center for Reconstructive Biotechnology and Division of Advanced Prosthodontics, Biomaterials and Hospital Dentistry, Los Angeles, CA (United States); Lin, Audrey [UCLA School of Dentistry, Weintraub Center for Reconstructive Biotechnology and Division of Advanced Prosthodontics, Biomaterials and Hospital Dentistry, Los Angeles, CA (United States); Wang, Chiachien Jake [UCLA School of Dentistry, Weintraub Center for Reconstructive Biotechnology and Division of Advanced Prosthodontics, Biomaterials and Hospital Dentistry, Los Angeles, CA (United States)

2007-06-20

We report here a new versatile method to deposit discrete hydroxyapatite (HA) nanoparticles on a titanium (Ti) implant with predisposing substrate microtopography, which exhibited an unexpectedly robust biological effect. Commercially pure Ti substrates were treated with 3-aminopropyltriethoxysilane, on which HA nanoparticles (20 nm) were deposited and chemically bonded to TiO{sub 2}. The HA deposition rate was linearly related to the treatment time and HA nanoparticles were deposited on up to 50% of the substrate surface. As a result, the discrete deposition of HA nanoparticles generated novel 20-40 nm nanotopography on the Ti substrate with microtopography that was smooth (turned) or roughened by double acid etching (DAE). The experimental implants with or without HA nanoparticles were surgically placed in rat femur and an implant push-in test was performed after two weeks of healing. The deposition of HA nanoparticles on the DAE surface increased the mechanical withstanding load by 129% and 782% as compared to the control DAE and turned implants, respectively. Micro-computed tomography-based 3D bone morphometry revealed equivalent bone volumes around the DAE implant with or without HA nanoparticles. These data suggest that the discrete deposition of HA nanoparticles accelerates the early osseointegration process, likely through increased shear bonding strengths.

Deposition of size-selected atomic clusters on surfaces

International Nuclear Information System (INIS)

Carroll, S.J.

1999-06-01

This dissertation presents technical developments and experimental and computational investigations concerned with the deposition of atomic clusters onto surfaces. It consists of a collection of papers, in which the main body of results are contained, and four chapters presenting a subject review, computational and experimental techniques and a summary of the results presented in full within the papers. Technical work includes the optimization of an existing gas condensation cluster source based on evaporation, and the design, construction and optimization of a new gas condensation cluster source based on RF magnetron sputtering (detailed in Paper 1). The result of cluster deposition onto surfaces is found to depend on the cluster deposition energy; three impact energy regimes are explored in this work. (1) Low energy: n clusters create a defect in the surface, which pins the cluster in place, inhibiting cluster diffusion at room temperature (Paper V). (3) High energy: > 50 eV/atom. The clusters implant into the surface. For Ag 20 -Ag 200 clusters, the implantation depth is found to scale linearly with the impact energy and inversely with the cross-sectional area of the cluster, with an offset due to energy lost to the elastic compression of the surface (Paper VI). For smaller (Ag 3 ) clusters the orientation of the cluster with respect to the surface and the precise impact site play an important role; the impact energy has to be 'focused' in order for cluster implantation to occur (Paper VII). The application of deposited clusters for the creation of Si nanostructures by plasma etching is explored in Paper VIII. (author)

Diamond-like carbon films deposited by a hybrid ECRCVD system

International Nuclear Information System (INIS)

Guo, C.T.; Dittrich, K.-H.

2007-01-01

A novel hybrid technique for diamond-like carbon (DLC) film deposition has been developed. This technique combines the electron cyclotron resonance chemical vapor deposition (ECRCVD) of C 2 H 2 and metallic magnetron sputtering. Here we described how DLC film is used for a variety of applications such as stamper, PCB micro-tools, and threading form-tools by taking advantage of hybrid ECRCVD system. The structure of the DLC films is delineated by a function of bias voltages by Raman spectroscopy. This function includes parameters such as dependence of G peak positions and the intensity ratio (I D /I G ). Atomic force microscope (AFM) examines the root-mean-square (R.M.S.) roughness and the surface morphology. Excellent adhesion and lower friction coefficients of a DLC film were also assessed

COMPARING OF DEPOSIT MODEL AND LIFE INSURANCE MODEL IN MACEDONIA

Directory of Open Access Journals (Sweden)

TATJANA ATANASOVA-PACHEMSKA

2016-02-01

Full Text Available In conditions of the continuous decline of the interest rates for bank deposits, and at a time when uncertainty about the future is increasing, physical and legal persons have doubts how to secure their future or how and where to invest their funds and thus to “fertilize” and increase their savings. Individuals usually choose to put their savings in the bank for a certain period, and for that period to receive certain interest, or decide to invest their savings in different types of life insurance and thus to "take care" of their life, their future and the future of their families. In mathematics are developed many models that relate to the compounding and the insurance. This paper is a comparison of the deposit model and the model of life insurance

THE ACTIVITIES OF THE NATIONAL BANK OF UKRAINE ON THE OPEN MARKET: OPERATION WITH CERTIFICATES OF DEPOSITS

OpenAIRE

Yuliia Harkusha

2016-01-01

In the article investigated the activities of the National Bank of Ukraine on the open market. The analysis of operations of the National Bank of Ukraine banks to raise funds placing deposit certificates. Defined impact operations of the central bank's own debt securities to trading volumes deposit certificates of the National Bank of Ukraine on the stock market and the credit activity of banks. Identified problems interest rate policy and the ways to overcome them. Key words: National Bank o...

Power deposition distribution in liquid lead cooled fission reactors and effects on the reactor thermal behaviour

International Nuclear Information System (INIS)

Cevolani, S.; Nava, E.; Burn, K. W.

2001-01-01

In the framework of an ADS study (Accelerator Driven System, a reactor cooled by a lead bismuth alloy) the distribution of the deposited energy between the fuel, coolant and structural materials was evaluated by means of Monte Carlo calculations. The energy deposition in the coolant turned out to be about four percent of the total deposited energy. In order to study this effect, further calculations were performed on water and sodium cooled reactors. Such an analysis showed, for both coolant materials, a much lower heat deposition, about one percent. Based on such results, a thermohydraulic analysis was performed in order to verify the effect of this phenomenon on the fuel assembly temperature distribution. The main effect of a significant fraction of energy deposition in the coolant is concerned with the decrease of the fuel pellet temperature. As a consequence, taking into account this effect allows to increase the possibilities of optimization at the disposal of the designer [it

Influence of nickel and nitrogen on the structure workability and mechanical properties of weld-deposited high-chromium metal

International Nuclear Information System (INIS)

Krasavchikov, V.A.; Solov'eva, L.I.

1984-01-01

Results are presented of investigation into the effect of austenite-forming elements (nitrogen and nickel) on the structure, mechanical properties and workability durina weld deposition and on the hardness after heat treatment of the Kh32N8M2 alloy forming the sigma-phase. Nitrogen is stated to produce a stronger effect on the improvement of the workability at a minimum decrease in the hardness of the alloy being investigated. Changes in the mechanical properties and workability of the alloy are shown to take place at the expense of changes in the structural components, the austenite quantity in the structure as well as its arrangement and form being the determining factors. The effect of nickel- and nitrogen content on the sigma-phase formation is less noticeable as compared with their effect on austenization. It should be taken into account that in case of nickel and nitrogen alloying an essential part of nitrogen is bound in chromium nitrides, that is why a decrease in the alloy hardness under heat treatment is less noticeable with growing nitrogen concentration

When and Where Learning is Taking Place: Multisynaptic Changes in Strength During Different Behaviors Related to the Acquisition of an Operant Conditioning Task by Behaving Rats.

Science.gov (United States)

Fernández-Lamo, Iván; Delgado-García, José M; Gruart, Agnès

2018-03-01

Although it is generally assumed that brain circuits are modified by new experiences, the question of which changes in synaptic efficacy take place in cortical and subcortical circuits across the learning process remains unanswered. Rats were trained in the acquisition of an operant conditioning in a Skinner box provided with light beams to detect animals' approaches to lever and feeder. Behaviors such as pressing the lever, eating, exploring, and grooming were also recorded. Animals were chronically implanted with stimulating and recording electrodes in hippocampal, prefrontal, and subcortical sites relevant to the task. Field synaptic potentials were evoked during the performance of the above-mentioned behaviors and before, during, and after the acquisition process. Afferent pathways to the hippocampus and the intrinsic hippocampal circuit were slightly modified in synaptic strength during the performance of those behaviors. In contrast, afferent and efferent circuits of the medial prefrontal cortex were significantly modified in synaptic strength across training sessions, mostly at the moment of the largest change in the learning curve. Performance of behaviors nondirectly related to the acquisition process (exploring, grooming) also evoked changes in synaptic strength across training. This study helps to understand when and where learning is being engraved in the brain. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Uranium accumulation in CTF and ETF-II rotors

International Nuclear Information System (INIS)

1987-06-01

In the expanding technology of uranium enrichment by gas centrifuge, efforts are being made to become more and more familar with the reactions taking place inside the rotor tube while the machine is operational. Inspection of the rotor after shutdown shows where uranium containing compounds are deposited. A study of these deposits from several ETF, CTF and CPL rotors has provided insight as to accumulation amounts, its composition and deposition parameters involved

Deposition and surface characterization of nanoparticles of zinc oxide using dense plasma focus device in nitrogen atmosphere

International Nuclear Information System (INIS)

Malhotra, Yashi; Srivastava, M P; Roy, Savita

2010-01-01

Nanoparticles of zinc oxide from zinc oxide pellets in the nitrogen plasma atmosphere are deposited on n and p type silicon substrates using Dense Plasma Focus device. The hot and dense nitrogen plasma formed during the focus phase ionizes the ZnO pellet, which then move upward in a fountain like shape and gets deposited on substrates which are placed above the top of the anode. Structural and surface properties of the deposited ZnO are investigated using X-ray diffraction and Atomic force microscope (AFM). X-ray spectra shows the diffraction plane (002) of ZnO nanoparticles deposited on Si with few shots in nitrogen atmosphere. AFM investigations revealed that there are nanoparticles of size between 15-80 nm on n-Si and p-Si substrates. The deposition on n-type Si is better than the p-type Si can be seen from AFM images, this may be due to different orientation of silicon.

How Does Photosynthesis Take Place in Our Oceans?

OpenAIRE

Ghosh, Tonmoy; Mishra, Sandhya

2017-01-01

The food we eat ultimately comes from plants, either directly or indirectly. The importance of plants as the global kitchen can never be underestimated. Plants “eat” sunlight and carbon dioxide to produce their own food and food for the millions of other organisms dependent on them. A molecule, chlorophyll (Chl), is crucial for this process, since it absorbs sunlight. However, the way land plants produce their food is very different from the way plants in the oceans produce their food. Since ...

When radionuclides take the place of vital elements

International Nuclear Information System (INIS)

Rouffignac, Ch. de; Poncy, J.L.; Martin, M.

2003-01-01

The radiosensitivity of the kidneys is a major factor restricting the applications of chemoradiotherapy. However, improved knowledge of the mechanisms involved has allowed new treatments to be developed that attenuate the effects of the irradiation or delay its consequences. Certain radioactive elements can behave in the body like calcium, and so exhibit a special affinity for bone structures. The skin is the first tissue that is damaged by external exposure to ionising radiation. The early and late responses to irradiation in this complex organ are still poorly understood. Thanks to DNA micro-arrays, the response of skin cells to irradiation, and in particular that of epidermal stem cells, can now be studied globally. (authors)

BP-Mobil partnership. The common network takes place

International Nuclear Information System (INIS)

Anon.

1997-01-01

After the partnership between BP and Mobil was signed, the program of transformation of the petrol stations network started in November 1996 in the UK and concern 3300 stations in Europe and 800 stations in France. About 9100 stations will be transformed by the end of 1998. BP France is the operator for petroleum products (petrol, fuel, bitumens, LPG..) with a 70% share holding (30% for Mobil) while Mobil is the major shareholder (51%) for the lubricants and special products activities. The chemical, aviation nd maritime activities are not concerned. Thanks to the fusion of their down-file activities in Europe, the benefits of the partnership should reach 600 to 700 million of US Dollars each year. However the restructuring cost should reach 740 millions of US Dollars in two years, which doubles the initial estimation. Short paper. (J.S.)

Exploration of method determining hydrogeologic parameters of low permeability sandstone uranium deposits

International Nuclear Information System (INIS)

Ji Hongbin; Wu Liwu; Cao Zhen

2012-01-01

A hypothesis of regarding injecting test as 'anti-pumping' test is presented, and pumping test's 'match line method' is used to process data of injecting test. Accurate hydrogeologic parameters can be obtained by injecting test in the sandstone uranium deposits with low permeability and small pumping volume. Taking injecting test in a uranium deposit of Xinjiang for example, the hydrogeologic parameters of main ore-bearing aquifer were calculated by using the 'anti-pumping' hypothesis. Results calculated by the 'anti-pumping' hypothesis were compared with results calculated by water level recovery method. The results show that it is feasible to use 'anti-pumping' hypothesis to calculate the hydrogeologic parameters of main ore-bearing aquifer. (authors)

Preparation and microstructural properties of erbium doped alumina–yttria oxide thin films deposited by aerosol MOCVD

Energy Technology Data Exchange (ETDEWEB)

Salhi, Rached, E-mail: salhi_rached@yahoo.fr [Laboratoire de Science et Ingénierie des MAtériaux et Procédés 1130 rue de la PiscineBP 75-F-38402 Saint Martin D’Hères Cedex 1 (France); Laboratoire des Matériaux et du Génie Physique, CNRS UMR 5628, INP Grenoble-Minatec, 3 parvis Louis Néel BP 257, 38 016 Grenoble Cedex 1 (France); Jimenez, Carmen; Deschanvres, Jean-Luc [Laboratoire des Matériaux et du Génie Physique, CNRS UMR 5628, INP Grenoble-Minatec, 3 parvis Louis Néel BP 257, 38 016 Grenoble Cedex 1 (France); Guyot, Yannick [LPCML-UMR 5620 CNRS/UCBL Universite´ Claude Bernard Lyon 110 Rue Ada Byron 69622 Villeurbanne Cedex (France); Chaix-Pluchery, Odette; Rapenne, Laetitia [Laboratoire des Matériaux et du Génie Physique, CNRS UMR 5628, INP Grenoble-Minatec, 3 parvis Louis Néel BP 257, 38 016 Grenoble Cedex 1 (France); Maâlej, Ramzi [LPCML-UMR 5620 CNRS/UCBL Universite´ Claude Bernard Lyon 110 Rue Ada Byron 69622 Villeurbanne Cedex (France); Fourati, Mohieddine [Laboratoire de Chimie Industrielle, Ecole Nationale d’Ingénieur de Sfax, University of Sfax BP W 3038 Sfax (Tunisia); Laboratoire de Physique Appliquée, Groupe de Physique Théorique, Département de Physique, Faculté des Sciences de Sfax, University of Sfax 3018 Sfax (Tunisia)

2013-10-15

Erbium-doped aluminum–yttrium oxide films (Er: Al{sub 2}O{sub 3}–Y{sub 2}O{sub 3}) were prepared by aerosol-UV assisted Metalorganic Chemical Vapor Deposition (MOCVD) at 410 °C and annealed at 1000 °C. The effects of humidity of carrier gas and UV-assistance on their structure and optical properties were investigated using scanning electron microscope, X-ray diffraction and Transmission electron microscopy. It was found that under low air humidity and without UV-assistance the films present a low mol% Al{sub 2}O{sub 3} (10 mol%) two different structural phases are observed corresponding to the cubic and the monoclinic structures of Y{sub 2}O{sub 3}. When the deposition takes place under high air humidity and with UV assistance the Er:Al{sub 2}O{sub 3}–Y{sub 2}O{sub 3} films present a very high mol% Al{sub 2}O{sub 3} (88 mol%) and crystallize in the Y{sub 3}Al{sub 5}O{sub 12} (YAG) compound mixed with an amorphous phase. The Er{sup 3+} luminescence analyzed in the visible and IR regions, shows the classical green transitions. The best optical properties were obtained with the Er:Al{sub 2}O{sub 3}–Y{sub 2}O{sub 3} films grown under high air humidity with UV-assistance. Under such deposition conditions, {sup 4}I{sub 13/2} lifetimes was found to be 1.1 ms. This indicates that the deposition conditions, in particular air humidity, play an important role in the luminescent properties even after annealing. -- Highlights: • We investigate the effects of humidity and UV on the properties of Er:Al{sub 2}O{sub 3}–Y{sub 2}O{sub 3}. • Under low air humidity and without UV-assistance the films present a low mol% Al{sub 2}O{sub 3}. • Under high air humidity and with UV the Er:Al{sub 2}O{sub 3}–Y{sub 2}O{sub 3} present high mol% Al{sub 2}O{sub 3}. • The film crystallize in the YAG phase mixed with an amorphous phase. • The best optical properties were obtained under high air humidity with UV-assistance.

Design of Faraday cup ion detectors built by thin film deposition

Energy Technology Data Exchange (ETDEWEB)

Szalkowski, G.A., E-mail: gszalkowski3@gatech.edu [Department of Nuclear Engineering, Georgia Institute of Technology, 770 State St., Atlanta, GA 30332 (United States); Darrow, D.S., E-mail: ddarrow@pppl.gov [Princeton Plasma Physics Laboratory, P. O. Box 451, Princeton, NJ 08543 (United States); Cecil, F.E., E-mail: fcecil@mines.edu [Department of Physics, Colorado School of Mines, Golden, CO 80401 (United States)

2017-03-11

Thin film Faraday cup detectors can provide measurements of fast ion loss from magnetically confined fusion plasmas. These multilayer detectors can resolve the energy distribution of the lost ions in addition to giving the total loss rate. Prior detectors were assembled from discrete foils and insulating sheets. Outlined here is a design methodology for creating detectors using thin film deposition that are suited to particular scientific goals. The intention is to use detectors created by this method on the Joint European Torus (JET) and the National Spherical Torus Experiment-Upgrade (NSTX-U). The detectors will consist of alternating layers of aluminum and silicon dioxide, with layer thicknesses chosen to isolate energies of interest. Thin film deposition offers the advantage of relatively simple and more mechanically robust construction compared to other methods, as well as allowing precise control of film thickness. Furthermore, this depositional fabrication technique places the layers in intimate thermal contact, providing for three-dimensional conduction and dissipation of the ion-produced heating in the layers, rather than the essentially two-dimensional heat conduction in the discrete foil stack implementation.

PLANNING OF ROUTE OF ROUNDABOUT HIGHWAYS TAKING INTO ACCOUNT THE ECONOMY OF FINANCIAL AND POWER RESOURCES

Directory of Open Access Journals (Sweden)

Ye. Ugnenko

2010-01-01

Full Text Available Taking into account the perspective intensity of motion of transit transport and project rate of movement pursuant to recommendations in relation to the rational placing of geometrical elements of the route the parameters of the route of roundabout highways are determined.

Acid Deposition Phenomena

International Nuclear Information System (INIS)

Ramadan, A.E.K.

2004-01-01

Acid deposition, commonly known as acid rain, occurs when emissions from the combustion of fossil fuels and other industrial processes undergo complex chemical reactions in the atmosphere and fall to the earth as wet deposition (rain, snow, cloud, fog) or dry deposition (dry particles, gas). Rain and snow are already naturally acidic, but are only considered problematic when less than a ph of 5.0 The main chemical precursors leading to acidic conditions are atmospheric concentrations of sulfur dioxide (SO 2 ) and nitrogen oxides (NO x ). When these two compounds react with water, oxygen, and sunlight in the atmosphere, the result is sulfuric (H 2 SO 4 ) and nitric acids (HNO 3 ), the primary agents of acid deposition which mainly produced from the combustion of fossil fuel and from petroleum refinery. Airborne chemicals can travel long distances from their sources and can therefore affect ecosystems over broad regional scales and in locations far from the sources of emissions. According to the concern of petroleum ministry with the environment and occupational health, in this paper we will discussed the acid deposition phenomena through the following: Types of acidic deposition and its components in the atmosphere Natural and man-made sources of compounds causing the acidic deposition. Chemical reactions causing the acidic deposition phenomenon in the atmosphere. Factors affecting level of acidic deposition in the atmosphere. Impact of acid deposition. Procedures for acidic deposition control in petroleum industry

"From this place and of this place:" climate change, sense of place, and health in Nunatsiavut, Canada.

Science.gov (United States)

Cunsolo Willox, Ashlee; Harper, Sherilee L; Ford, James D; Landman, Karen; Houle, Karen; Edge, Victoria L

2012-08-01

As climate change impacts are felt around the globe, people are increasingly exposed to changes in weather patterns, wildlife and vegetation, and water and food quality, access and availability in their local regions. These changes can impact human health and well-being in a variety of ways: increased risk of foodborne and waterborne diseases; increased frequency and distribution of vector-borne disease; increased mortality and injury due to extreme weather events and heat waves; increased respiratory and cardiovascular disease due to changes in air quality and increased allergens in the air; and increased susceptibility to mental and emotional health challenges. While climate change is a global phenomenon, the impacts are experienced most acutely in place; as such, a sense of place, place-attachment, and place-based identities are important indicators for climate-related health and adaptation. Representing one of the first qualitative case studies to examine the connections among climate change, a changing sense of place, and health in an Inuit context, this research draws data from a multi-year community-driven case study situated in the Inuit community of Rigolet, Nunatsiavut, Canada. Data informing this paper were drawn from the narrative analysis of 72 in-depth interviews conducted from November 2009 to October 2010, as well as from the descriptive analysis of 112 questionnaires from a survey in October 2010 (95% response rate). The findings illustrated that climate change is negatively affecting feelings of place attachment by disrupting hunting, fishing, foraging, trapping, and traveling, and changing local landscapes-changes which subsequently impact physical, mental, and emotional health and well-being. These results also highlight the need to develop context-specific climate-health planning and adaptation programs, and call for an understanding of place-attachment as a vital indicator of health and well-being and for climate change to be framed as an

Taking antacids

Science.gov (United States)

Heartburn - antacids; Reflux - antacids; GERD - antacids ... Antacids are a good treatment for heartburn that occurs once in a while. Take antacids about 1 hour after eating or when you have heartburn. If you are taking ...

Taking warfarin (Coumadin)

Science.gov (United States)

... page: //medlineplus.gov/ency/patientinstructions/000292.htm Taking warfarin (Coumadin) To use the sharing features on this ... form a clot or have bleeding problems. Taking Warfarin It is important that you take warfarin exactly ...

Take Charge. Take the Test. PSA (:30)

Centers for Disease Control (CDC) Podcasts

2012-03-07

As part of the Take Charge. Take the Test. campaign, this 30 second PSA encourages African American women to get tested for HIV. Locations for a free HIV test can be found by visiting hivtest.org/takecharge or calling 1-800-CDC-INFO (1-800-232-4636).  Created: 3/7/2012 by National Center for HIV/AIDS, Viral Hepatitis, STD, and TB Prevention (NCHHSTP).   Date Released: 3/7/2012.

Deposition of insoluble elastin by pulmonary fibroblasts from patients with COPD is increased by treatment with versican siRNA

Directory of Open Access Journals (Sweden)

Wu L

2017-01-01

Full Text Available Lian Wu,1,2 Jing Zhang,3 Jie Ming Qu,4 Chun-xue Bai,3 Mervyn J Merrilees5 1Department of Community and Health Services, Unitec, 2Department of Pharmacology & Clinical Pharmacology, University of Auckland, Auckland, New Zealand; 3Department of Pulmonary Medicine, Zhongshan Hospital, Fudan University, 4Department of Pulmonary Medicine, Ruijin Hospital, Shanghai Jiao Tong University School of Medicine, Shanghai, People’s Republic of China; 5Department of Anatomy and Medical Imaging, University of Auckland, Auckland, New Zealand Abstract: A reduced content of alveolar elastic fibers is a key feature of COPD lung. Despite continued elastogenic potential by alveolar fibroblasts in the lung affected by COPD, repair of elastic fibers does not take place, which is due to increased levels of the chondroitin sulfate proteoglycan versican that inhibits the assembly of tropoelastin into fibers. In this study, primary pulmonary fibroblast cell lines from COPD and non-COPD patients were treated with a small interfering RNA (siRNA against versican to determine if knockdown of versican could restore the deposition of insoluble elastin. Versican siRNA treatment reduced versican expression and secretion by pulmonary fibroblasts from both COPD and non-COPD patients (P<0.01 and significantly increased deposition of insoluble elastin in the COPD cell cultures (P<0.05. The treatment, however, did not significantly affect production of soluble elastin (tropoelastin in either the COPD or non-COPD cell cultures, supporting a role for versican in inhibiting assembly but not synthesis of tropoelastin. These results suggest that removal or knockdown of versican may be a possible therapeutic strategy for increasing deposition of insoluble elastin and stimulating repair of elastic fibers in COPD lung. Keywords: pulmonary fibroblasts, COPD, elastin, versican

The Dutch Deposit of Electronic Publications (DNEP - 1995-2000

Directory of Open Access Journals (Sweden)

Lex Sijtsma

2001-07-01

Full Text Available In 1993 the Internet took off with the introduction of HTML and the first browser (Mosaic. Two years later, in 1995, the Koninklijke Bibliotheek (KB decided to start a series of experiments and projects which would lead to a deposit system for Dutch Electronic Publications. In the same year the KB made a policy decision to include electronic material into its deposit. That marked the start of the Dutch Deposit for Electronic Publications (DNEP. Both as an operational service and at the same time as a test-bed for research into digital archiving. Early 1999 a Request For Information (RFI was sent out to selected companies. This was done to establish whether the functionalities the KB deemed neccessary for a digital deposit were available in the marketplace. On the basis of the positive outcome of this Request a European Tender was started. The KB developed a process model for a digital deposit as well as detailed functional requirements for such a system. A supplier, IBM, was selected. At the moment (early June 2000 talks about the implementation are in progress. The project will start in the summer of start of autumn of 2000 and will take 24 months. The Dutch government has acknowledged that the establishment of the Dutch electronic bibliography and the DNEP itself are indeed tasks of the Koninklijke Bibliotheek. We expect that appropriate structural funding to supports these tasks will become available. In this paper an overview is given of what the KB has done since 1995 up till now and how this has led to the implementation-project that is about to start.

Technical training: places available

CERN Multimedia

HR Department

2007-01-01

CERN Technical Training: Open Courses (April - June 2007) The following course sessions are currently scheduled in the framework of the CERN Technical Training Programme 2007:   AutoCAD 2006 - niveau 1 (course in French): 25.4.- 26.4.2007 & 2.5. - 3.5.2007 (4 days in 2 modules, 5 places available) AutoCAD 2006 - niveau 1 (course in French): 27.6.- 28.6.2007 & 3.7. - 4.7.2007 (4 days in 2 modules, 5 places available) AutoCAD Mechanical 2006 (course in French) 21.6.-22.6.2007 (2 days, 8 places available) * NEW COURSE* Automate de securite S7 (course in French) 14.5.-16.5.2007 (3 days, 4 places available) * NEW COURSE* Automate de securite S7 (course in French): 9.5.-11.5.2007 (3 days, 4 places available) JCOP - Joint PVSS-JCOP Frameswork (course in English): 21.5.-25.5.2007 (5 days, 12 places available) JCOP - Finite State Machines in the JCOP Frameswork (course in English): 12.6.-14.6.2007 (3 days, 12 places available) LabVIEW Basics 1 (in English): 2.-4.5.2007 (3 days, 7 places ...

Local deposition of high-purity Pt nanostructures by combining electron beam induced deposition and atomic layer deposition

NARCIS (Netherlands)

Mackus, A.J.M.; Mulders, J.J.L.; Sanden, van de M.C.M.; Kessels, W.M.M.

2010-01-01

An approach for direct-write fabrication of high-purity platinum nanostructures has been developed by combining nanoscale lateral patterning by electron beam induced deposition (EBID) with area-selective deposition of high quality material by atomic layer deposition (ALD). Because virtually pure,

The value of place

Science.gov (United States)

Dentzau, Michael W.

2014-03-01

This commentary seeks to expand the dialogue on place-based science education presented in Katie Lynn Brkich's article, where the connections fifth grade students make between their formal earth science curriculum and their lived experiences are highlighted. The disconnect between the curriculum the students are offered and their immediate environment is clear, and we are presented with examples of how they strive to make connections between the content and what they are familiar with—namely their surroundings. "Place" is identified as a term with complex meanings and interpretations, even in the scope of place-based science education, and understanding how the term is used in any given scenario is essential to understanding the implications of place-based education. Is place used as a location, locale or a sense of place? To understand "place" is to acknowledge that for the individual, it is highly situational, cultural and personal. It is just such attributes that make place-based education appealing, and potentially powerful, pedagogically on one hand, yet complex for implementation on the other. The argument is posed that place is particularly important in the context of education about the environment, which in its simplest manifestation, connects formal science curriculum to resources that are local and tangible to students. The incorporation of place in such a framework seeks to bridge the gap between formal school science subjects and students' lived experiences, yet acknowledges the tensions that can arise between accommodating place meanings and the desire to acculturate students into the language of the scientific community. The disconnect between guiding policy frameworks and the reality of the Next Generation Science Standards is addressed opening an avenue for further discussion of the importance of socio-cultural frameworks of science learning in an ever increasing era of accountability.

Note Taking on Trial: A Legal Application of Note-Taking Research

Science.gov (United States)

Kiewra, Kenneth A.

2016-01-01

This article is about note taking, but it is not an exhaustive review of note-taking literature. Instead, it portrays the application of note-taking research to an unusual and important area of practice--the law. I was hired to serve as an expert witness on note taking in a legal case that hinged, in part, on the completeness and accuracy of…

Tectonic regime and evolution of exogenous uranium ore formation in sedimentary rocks

International Nuclear Information System (INIS)

Danchev, V.I.; Shumlyanskij, V.A.; AN Ukrainskoj SSR, Kiev. Inst. Geokhimii i Fiziki Mineralov)

1981-01-01

Regularities of the formation and location of exogenous uranium deposits are studied depending on the tectonics regime. It is shown that the successive alternation of sedimentogenous deposits by diagenetic and, subsequently, catogene ones takes place from early Proterozoic to Cenozoic, i.e. exogenous ore formation in the history of the Earth proceeds from early to late stages of lithogenesis [ru

Identity as "knowing your place": the narrative construction of space in a healthcare profession.

Science.gov (United States)

van Vuuren, Mark; Westerhof, Gerben J

2015-03-01

The construction of space in which a story takes place can have important consequences for the evaluation of health interventions. In this article, we explore the ways professionals narratively position themselves in a situation, treating identity literally as "knowing one's place." More specifically, we explore the spatial language health professionals use to describe their work. Using descriptions of professionals in a drug habilitation organization, we illustrate how they use route (i.e., an active tour through the space), survey (i.e., a stationary viewpoint from above), and gaze perspectives (i.e. a stable viewpoint onto a place) to explain the work situations they encounter. Each of these perspectives facilitates a different mode of evaluation in terms of distance, emotion, and identity. We propose opportunities for research and implications of the ways in which spaces and spatial perspectives set the scene in the narratives of healthcare professionals. © The Author(s) 2015.

Depósitos corneales de ciprofloxacino Corneal deposits of ciprofloxacin

Directory of Open Access Journals (Sweden)

Taimi Cárdenas Díaz

2010-01-01

Full Text Available Las fluoroquinolonas son ampliamente utilizadas para el tratamiento de infecciones oculares bacterianas, ya que tienen actividad tanto para grampositivos, como para gramnegativos. Son fármacos seguros, pero se han descrito depósitos blancos cristalinianos en pacientes con administración frecuente y prolongada;en la mayoría de los casos, ellos resuelven de forma lenta al interrumpir el tratamiento. Si esto no ocurre, los depósitos se deben desbridar. Se ilustran 3 casos operados de catarata que llevaron tratamiento con ciprofloxacino en el posoperatorio, en los cuales se presentaron depósitos corneales y aunque disminuyó la agudeza visual, esta se recuperó después de la queratectomía.Fluoroquinolones are broadly used for the treatment of bacterial ocular infections, since they can act upon both grampositive and gramnegative bacteria. They are safe drugs, but white corneal deposits have been described in patients who frequently take this drug for a long period of time. In most of the cases, the deposits disappear slowly after the treatment is interrupted. If this does not happen, the deposits should be eliminated. Three cases operated on from cataract were presented, who had been taken ciprofloxacin in the postoperative stage and had corneal deposits. Although their visual acuity decreased, it recovered after keratectomy.

Geology and recognition criteria for veinlike uranium deposits of the lower to middle Proterozoic unconformity and strata-related types. Final report

International Nuclear Information System (INIS)

Dahlkamp, F.J.; Adams, S.S.

1981-01-01

The discovery of the Rabbit Lake deposit, Saskatchewan, in 1968 and the East Alligator Rivers district, Northern Territory, Australia, in 1970 established the Lower-Middle Proterozoic veinlike-type deposits as one of the major types of uranium deposits. The term veinlike is used in order to distinguish it from the classical magmatic-hydrothermal vein or veintype deposits. The veinlike deposits account for between a quarter and a third of the Western World's proven uranium reserves. Lower-Middle Proterozoic veinlike deposits, as discussed in this report include several subtypes of deposits, which have some significantly different geologic characteristics. These various subtypes appear to have formed from various combinations of geologic processes ranging from synsedimentary uranium precipitation through some combination of diagenesis, metamorphism, metasomatism, weathering, and deep burial diagenesis. Some of the deposit subtypes are based on only one or two incompletely described examples; hence, even the classification presented in this report may be expected to change. Geologic characteristics of the deposits differ significantly between most districts and in some cases even between deposits within districts. Emphasis in this report is placed on deposit descriptions and the interpretations of the observers

Geology and recognition criteria for veinlike uranium deposits of the lower to middle Proterozoic unconformity and strata-related types. Final report

Energy Technology Data Exchange (ETDEWEB)

Dahlkamp, F.J.; Adams, S.S.

1981-01-01

The discovery of the Rabbit Lake deposit, Saskatchewan, in 1968 and the East Alligator Rivers district, Northern Territory, Australia, in 1970 established the Lower-Middle Proterozoic veinlike-type deposits as one of the major types of uranium deposits. The term veinlike is used in order to distinguish it from the classical magmatic-hydrothermal vein or veintype deposits. The veinlike deposits account for between a quarter and a third of the Western World's proven uranium reserves. Lower-Middle Proterozoic veinlike deposits, as discussed in this report include several subtypes of deposits, which have some significantly different geologic characteristics. These various subtypes appear to have formed from various combinations of geologic processes ranging from synsedimentary uranium precipitation through some combination of diagenesis, metamorphism, metasomatism, weathering, and deep burial diagenesis. Some of the deposit subtypes are based on only one or two incompletely described examples; hence, even the classification presented in this report may be expected to change. Geologic characteristics of the deposits differ significantly between most districts and in some cases even between deposits within districts. Emphasis in this report is placed on deposit descriptions and the interpretations of the observers.

Wet and Dry Atmospheric Mercury Deposition Accumulates in Watersheds of the Northeastern United States

Science.gov (United States)

Boyer, E. W.; Grant, C.; Grimm, J.; Drohan, P. J.; Bennett, J.; Lawler, D.

2013-12-01

Mercury emissions to the atmosphere from coal-fired power plants and other sources such as waste incineration can be deposited to landscapes in precipitation and in dry fallout. Some mercury reaches watersheds and streams, where it can accumulate in sediments and biota. Human exposure to mercury occurs primarily through fish consumption, and currently mercury fish eating advisories are in place for many of the streams and lakes in the state. Here, we explored mercury in air, soils, water, and biota. To quantify atmospheric mercury deposition, we measured both wet and dry mercury deposition at over 10 locations in Pennsylvania, from which we present variation in mercury deposition and initial assessments of factors affecting the patterns. Further, we simulated mercury deposition at unmonitored locations in Pennsylvania and the northeastern United States over space and time with a high-resolution modeling technique that reflects storm tracks and air flow patterns. To consider mercury accumulation in watersheds, we collected data on soil mercury concentrations in a set of soil samples, and collected baseline data on mercury in streams draining 35 forested watersheds across Pennsylvania, spanning gradients of atmospheric deposition, climate and geology. Mercury concentrations were measured in stream water under base-flow conditions, in streambed sediments, aquatic mosses, and in fish tissues from brook trout. Results indicate that wet and dry atmospheric deposition is a primary source of mercury that is accumulating in watersheds of Pennsylvania and the northeastern United States.

Reactor-grade plutonium inventory taking in the RT-1 storage production association Mayak site

International Nuclear Information System (INIS)

Zatorskij, Yu.M.

1999-01-01

General characterization of plutonium physical inventory taking (PIT) system at the RT-1 plant is given in the paper. The proposed PIT procedure is based on measuring indirect parameters of inventory plutonium, the so called attributes of items - containers with plutonium. The method how to assess quality of item attribute measurements is proposed. If any defect is detected, the container is sent back to the place where it been filed and packed in order to perform direct measurements of plutonium mass. Taking into account the above-mentioned techniques and the availability of several access control means it is proposed the period between two PIT procedures be equal to 12 months [ru

Diagenetic pathways in deposits of cool- and cold-water carbonate factories

Science.gov (United States)

Frank, T. D.; James, N. P.

2017-12-01

the seafloor and upon subaerial exposure. Interpretations of ancient deposits should take into account the potential for taphonomic loss of aragonitic allochems, modification of depositional textures via reworking and compaction, and grain alteration and cementation focused in the burial environment.

Parameters influencing deposit estimation when using water sensitive papers

Directory of Open Access Journals (Sweden)

Emanuele Cerruto

2013-10-01

Full Text Available The aim of the study was to assess the possibility of using water sensitive papers (WSP to estimate the amount of deposit on the target when varying the spray characteristics. To identify the main quantities influencing the deposit, some simplifying hypotheses were applied to simulate WSP behaviour: log-normal distribution of the diameters of the drops and circular stains randomly placed on the images. A very large number (4704 of images of WSPs were produced by means of simulation. The images were obtained by simulating drops of different arithmetic mean diameter (40-300 μm, different coefficient of variation (0.1-1.5, and different percentage of covered surface (2-100%, not considering overlaps. These images were considered to be effective WSP images and then analysed using image processing software in order to measure the percentage of covered surface, the number of particles, and the area of each particle; the deposit was then calculated. These data were correlated with those used to produce the images, varying the spray characteristics. As far as the drop populations are concerned, a classification based on the volume median diameter only should be avoided, especially in case of high variability. This, in fact, results in classifying sprays with very low arithmetic mean diameter as extremely or ultra coarse. The WSP image analysis shows that the relation between simulated and computed percentage of covered surface is independent of the type of spray, whereas impact density and unitary deposit can be estimated from the computed percentage of covered surface only if the spray characteristics (arithmetic mean and coefficient of variation of the drop diameters are known. These data can be estimated by analysing the particles on the WSP images. The results of a validation test show good agreement between simulated and computed deposits, testified by a high (0.93 coefficient of determination.

Taking Possession: Rituals, Space and Authority

Directory of Open Access Journals (Sweden)

Jennifer Mara DeSilva

2016-12-01

Full Text Available In early modern Europe authority over communities, both people and spaces, was visualized through ritual gestures and processions. Communities gathered to witness ceremonial entries that drew on accepted forms of gestures and speech identifying individuals and articulating their place in the urban power relationship. Ceremonial entries by rulers, ambassadors, bishops, and other office-holders drew on ritual acts projecting messages of possession in order to establish reputations of prestige and authority. This introductory essay draws on cultural anthropology and recent historiography to build a framework for understanding rituals of possession that went beyond the tradition triumphal entry to incorporate substitutes, new modes of prestigious display, and attend to conflicts. By “taking possession” of communities, offices, and spaces using accepted ritual forms, early moderns initiated conversations about authority and power that were far more flexible in their scope, practice, and participants than expected.

Results of potential exposure assessments during the maintenance and cleanout of deposition equipment

Energy Technology Data Exchange (ETDEWEB)

Zimmermann, E., E-mail: eric.zimmermann@cea.fr; Derrough, S.; Locatelli, D.; Durand, C.; Fromaget, J. L.; Lefranc, E.; Ravanel, X.; Garrione, J. [Nanosafety Platform, CEA, DRT (France)

2012-10-15

This study is a compilation of results obtained during the cleanout of deposition equipment such as chemical vapor deposition or physical vapor deposition The measurement campaigns aimed to evaluate the potential exposure to nanoaerosols in the occupational environment and were conducted in the workspace. The characterization of aerosols includes measurements of the concentration using condensation particle counters and measurements of the size distribution using fast mobility particle sizer, scanning mobility particle sizer, and electrical low pressure impactor (ELPI). Particles were sampled using collection membranes placed on the ELPIs stages. The samples were analyzed with an SEM-EDS to provide information including size, shape, agglomeration state, and the chemical composition of the particles. The majority of the time, no emission of nanoparticles (NPs) was measured during the use of the molecular deposition equipment or when opening the chambers, mainly due to the enclosed processes. On the other hand, the maintenance of the equipment, and especially the cleanout step, could induce high concentrations of NPs in the workplace following certain processes. Values of around 1 million particles/cm{sup 3} were detected with a size distribution including a high concentration of particles around 10 nm.

Sodium vapor deposition onto a horizontal flat plate above liquid sodium surface, 2

International Nuclear Information System (INIS)

Kudo, Kazuhiko; Hirata, Masaru.

1977-01-01

The sodium vapor deposition onto a horizontal flat plate above liquid sodium surface was studied. The analysis was performed by assuming that the sodium mist is emitted into the main flow without condensation and then grows up in the main flow and drops on the sodium surface. The effects of growth of sodium mist to the system were investigated. The model of the phenomena is the sodium deposition onto a horizontal flat plate which is placed above the sodium surface with the medium cover gas. One-dimensional analysis can be done. The rate of deposition is greatly reduced when the temperature of the flat plate is lowered. For the analysis of this phenomena, it is assumed that the sodium mist grows by condensation. One of results is that the real state may be the state between the state that the condensation of mist is made in the boundary layer and the state that the mist is condensed in the main flow. Others are that there is no effect of sodium mist condensation on the rate of deposition, and that the rate of the vaporization of sodium is given by the original and the modified model. (Kato, T.)

Size and type of places, geographical region, satisfaction with life, age, sex and place attachment

Directory of Open Access Journals (Sweden)

Mandal Alan

2016-04-01

Full Text Available The topic of the article concerns the issue of place attachment and its determinants. An analysis of place attachment was performed in terms of place identity and place dependence (Williams, Vaske, 2003. Moreover, links between place attachment and selected geographical (size and type of place, geographical region, demographic (age, sex and psychological (satisfaction with life variables were investigated.

Proposal on placing of composting place in micro-region Lednice and Valtice

Directory of Open Access Journals (Sweden)

Pavel Zemánek

2004-01-01

Full Text Available In relation to entrance of Czech Republic to the European union and with wo-revolving harmonization of our law order with EU direction, happen to classification of composting meaning. In presents act there are two circle of problems. First is utilization of rising waste, the second is perfection of soil fertility and raising of enviroment quality.The contribution deal with problems of modelling solution of place to biowaste composting and it´s optimum placing, applied on concrete conditions of the Lednice-Valtice Area. The basis is placement of dominant producer of biowaste, their kind, quantity and season in relation to prescription of compost fill. The proposal of compost technology enable determine size of place and help solve its placing.Circumscribed method is able to find practical exploitation at creation of place suggestion in real condition of existent areas.

Adjusting to New Places: International Student Adjustment and Place Attachment

Science.gov (United States)

Terrazas-Carrillo, Elizabeth C.; Hong, Ji Y.; Pace, Terry M.

2014-01-01

Using data obtained from in-depth semistructured interviews, we examined international students' attachments to place in the local American Midwestern community where they have attended college for at least 2 years. The results of this study suggest that participants engage in a process of renegotiation of meanings attached to new places in ways…

Compact vertical take-off and landing aerial vehicle for monitoring tasks in dense urban areas

Directory of Open Access Journals (Sweden)

Sergii FIRSOV

2015-09-01

Full Text Available Using of aerial vehicles with onboard sensory and broadcasting apparatus for monitoring a variety of objects and processes in inaccessible places of the city. A hardware and software package for the task solving is proposed in the article. Presented vehicle is a vertical take-off and landing airplane of tail-sitter type.

(Invited) Pure Dopant Deposition of B and Ga for Ultrashallow Junctions in Si-based Devices

NARCIS (Netherlands)

Nanver, L.K.; Sammak, A.; Mohammadi, V.; Mok, K.R.C.; Qi, L.; Sakic, A.; Golshani, N.; Darakhshandeh, J.; Scholtes, T.M.L.; De Boer, W.B.

2012-01-01

Envisioning wide future relevance, work is reviewed here on the pure dopant deposition of boron (PureB), gallium (PureGa) and the combination of the two (PureGaB), as used in the fabrication of nanometer shallow p+n Si and/or Ge diodes. Focus is placed on the special properties that have put these

DepositScan, a Scanning Program to Measure Spray Deposition Distributions

Science.gov (United States)

DepositScan, a scanning program was developed to quickly measure spray deposit distributions on water sensitive papers or Kromekote cards which are widely used for determinations of pesticide spray deposition quality on target areas. The program is installed in a portable computer and works with a ...

Development of a non-engine fuel injector deposit test for alternative fuels (ENIAK-project)

Energy Technology Data Exchange (ETDEWEB)

Hoffmann, Hajo; Pohland vom Schloss, Heide [OWI - Oel Waerme Institut GmbH, Herzogenrath (Germany)

2013-06-01

Deposit formation in and on the injectors of diesel engines may lead to injector malfunction, resulting in a loss in power, rough engine operation and poor emission levels. Poor Biodiesel quality, contamination with copper and zinc as well as undesired reactions between (several) additives and biodiesel components are known causes for nozzle fouling. Therefore, good housekeeping when using biodiesel is required, and all additives have to pass a no-harm test concerning injector fouling. The standard fouling tests are two engine tests: The XUD9-test (CEC F-23-01) and the DW-10-test (CEC DF 98-08). The XUD9 is a cost efficient, fast and proven testing method. It uses, however, an obsolete indirect injection diesel engine and cannot reproduce internal diesel injector deposits (IDID). The newer DW10 test is complex, costly and designed for high stress. This reduces the engine life and leads to a fuel consumption of approximately 1,000 1 per test, both contributing to the high costs of the test. The ENIAK-Project is funded by the FNR (''Fachagentur Nachwachsende Rohstoffe'', Agency for Renewable Resources) and conducted in cooperation with AGQM, ASG and ERC. Its main goal is the development, assembly, commissioning, and evaluation of a non-engine fuel injector test. It uses a complete common rail system. The injection takes place in a self-designed reactor instead of an engine, and the fuel is not combusted, but re-condensed and pumped in a circle, leading to a low amount of fuel required. If the test method proves to be as reliable as expected, it can be used as an alternative test method for injector fouling with low requirements regarding infrastructure on the testing site and sample volume. (orig.)

Physiochemical properties of TiO2 nanoparticle thin films deposited on stainless steel

Directory of Open Access Journals (Sweden)

M. Basiaga

2017-01-01

Full Text Available The purpose of this study was to evaluate the usefulness of TiO2 layer to improve hemocompatibility of 316LVM stainless steel. The TiO2 layers studied in this work were deposited from TiCl4 and H2O in a low-pressure Atomic Layer Deposition (ALD reactor taking into account number of cycles and process temperature. As a part of the research electrochemical studies of the layer after 28 days exposure to artificial plasma were carried out. In particular, potentiostatic, potentiodynamic and impedance studies were conducted. The obtained results were the basis for selection of surface treatment method dedicated to blood-contacting stainless steel implants.

Technical training - Places available

CERN Multimedia

2012-01-01

If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch Valeria Perez Reale, Learning Specialist, Technical Programme Coordinator (Tel.: 62424) Eva Stern and Elise Romero, Technical Training Administration (Tel.: 74924) HR Department Electronic Design Next Session Duration Language Availability Comprehensive VHDL for FPGA Design 08-Oct-12 to 12-Oct-12 5 days English 4 places Electrostatique / Protection ESD 28-Sep-12 to 28-Sep-12 3 hours French 25 places Impacts de la suppression du plomb (RoHS) en électronique 26-Oct-12 to 26-Oct-12 8 hours French 14 places Introduction to VHDL 10-Oct-12 to 11-Oct-12 2 days English 9 places LabVIEW Real Time and FPGA 13-Nov-12 to 16-Nov-12 5 days French 5 places LabVIEW for Experts 24-Sep-12 to 28-Sep-12 5 days English 6 places LabVIEW for beginners 15-Oct-12 to 17-...

Photovoicing the neighbourhood: Understanding the situated meaning of intangible places for ageing-in-place.

Science.gov (United States)

van Hees, Susan; Horstman, Klasien; Jansen, Maria; Ruwaard, Dirk

2017-11-01

Ageing-in-place is considered important for the health of older adults. In this paper, inspired by a constructivist approach to ageing-in-place, we unravel professionals' and older adults' constructions of ageing-in-place. Their perspectives are studied in relation to a policy that aims to develop so-called 'lifecycle-robust neighbourhoods' in the southern part of the Netherlands. We conducted a photovoice study in which 18 older adults (70-85 years) living independently and 14 professionals (social workers, housing consultants, neighbourhood managers and community workers) were asked to photograph and discuss the places they consider important for ageing-in-place. Based on a theoretically informed analysis of the data, we found that professionals primarily consider objective characteristics of neighbourhoods such as access to amenities, mobility and meeting places as important enablers for older adults to remain living independently. Analysis of older adults' photographs and stories show that they associate ageing-in-place with specific lived experiences and attachments to specific, intangible and memory-laden public places. We conclude that exploring these experiences helps to increase current knowledge about place attachment in old age. Copyright © 2017 Elsevier Ltd. All rights reserved.

Places available

CERN Multimedia

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. Places available The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses : Introduction à Outlook : 19.8.2004 (1 journée) Outlook (short course I) : E-mail : 31.8.2004 (2 hours, morning) Outlook (short course II) : Calendar, Tasks and Notes : 31.8.2004 (2 hours, afternoon) Instructor-led WBTechT Study or Follow-up for Microsoft Applications : 7.9.2004 (morning) Outlook (short course III) : Meetings and Delegation : 7.9.2004 (2 hours, afternoon) Introduction ...

Geological and geochemical aspects of uranium deposits: a selected, annotated bibliography. Vol. 2, Rev. 1

International Nuclear Information System (INIS)

Thomas, J.M.; Brock, M.L.; Garland, P.A.; White, M.B.; Daniel, E.W.

1979-07-01

This bibliography, a compilation of 490 references, is the second in a series compiled from the National Uranium Resource Evaluation (NURE) Bibliographic Data Base. This data base is one of six data bases created by the Ecological Sciences Information Center, Oak Ridge National Laboratory, for the Grand Junction Office of the Department of Energy. Major emphasis for this volume has been placed on uranium geology, encompassing deposition, genesis of ore deposits, and ore controls; and prospecting techniques, including geochemistry and aerial reconnaissance. The following indexes are provided to aid the user in locating references of interest: author, geographic location, quadrangle name, geoformational feature, taxonomic name, and keyword

Biomimetic Cationic Nanoparticles Based on Silica: Optimizing Bilayer Deposition from Lipid Films

Directory of Open Access Journals (Sweden)

Rodrigo T. Ribeiro

2017-10-01

Full Text Available The optimization of bilayer coverage on particles is important for a variety of biomedical applications, such as drug, vaccine, and genetic material delivery. This work aims at optimizing the deposition of cationic bilayers on silica over a range of experimental conditions for the intervening medium and two different assemblies for the cationic lipid, namely, lipid films or pre-formed lipid bilayer fragments. The lipid adsorption on silica in situ over a range of added lipid concentrations was determined from elemental analysis of carbon, hydrogen, and nitrogen and related to the colloidal stability, sizing, zeta potential, and polydispersity of the silica/lipid nanoparticles. Superior bilayer deposition took place from lipid films, whereas adsorption from pre-formed bilayer fragments yielded limiting adsorption below the levels expected for bilayer adsorption.

Controls on upper Campanian-Maastrichtian chalk deposition in the eastern Danish Basin

DEFF Research Database (Denmark)

Boussaha, Myriam; Thibault, Nicolas Rudolph; Anderskouv, Kresten

2017-01-01

% of the sediment. Sedimentation took place in deep water, below the photic zone and storm-wave base, and is characterized by decimetre to metre-scale variations in facies and trace fossil assemblages indicating repeated shifts in depositional environment. Integration of facies with published data on sea...... of accumulation rates and sea temperatures and is interpreted to represent a very broad set of deep water environmental conditions with an ample supply of calcareous nannofossil debris and intense bioturbation. Longer term shifts in deposition are best expressed by distribution of clay, flint and bioturbated...... micro-wackestone, bioturbated wackestone and laminated mudstone chalk facies, whereas the trace fossil assemblages appear less useful. The data set indicates overall shallowing over time with two distinctive events of clay influx to the basin during the late Campanian-earliest Maastrichtian and late...

Context in place

DEFF Research Database (Denmark)

Nordentoft, Helle Merete; Thomsen, Rie

specifically argue for a more grounded approach to the conception of context - a topographic approach - in which the physical setting - i.e. 'the place' becomes an inevitable part of analyses of guidance practices in order to understand participants' sense-making processes. In the paper we draw on two case...... studies on interdisciplinary clinical supervision and work place guidance in which there appears to be a mismatch between intended outcomes and actual events. The analyses demonstrate and support that 'the place' seems - to influence partipants' responses in the guidance sessions and, therefore, must...

76 FR 80891 - Small Takes of Marine Mammals Incidental to Specified Activities; Cape Wind's High Resolution...

Science.gov (United States)

2011-12-27

... expects some animals to avoid areas around the airgun array ensonified at the level of the exclusion zone... fresh carcass)--if supplemental measures are not likely to reduce the risk of additional serious... frequency range that takes place during a time when the animal is traveling through the open ocean, where...

78 FR 56583 - Deposit Insurance Regulations; Definition of Insured Deposit

Science.gov (United States)

2013-09-13

... as a potential global deposit insurer, preserve confidence in the FDIC deposit insurance system, and... the United States.\\2\\ The FDIC generally pays out deposit insurance on the next business day after a... since 2001 and total approximately $1 trillion today. In many cases, these branches do not engage in...

DEVELOPMENT OF IN-PLACE DENSITY METHOD FOR COLD IN-PLACE RECYCLING

Science.gov (United States)

2018-01-01

This report presents the results of a research study funded by the Nevada DOT and the SOLARIS University Transportation Center. The research developed a method for measuring the in-place density of the cold in-place recycled (CIR) layer immediately a...

Take Charge. Take the Test. "You Know" PSA (:60)

Centers for Disease Control (CDC) Podcasts

As part of the Take Charge. Take the Test. campaign, this 60 second PSA encourages African American women to get tested for HIV. Locations for a free HIV test can be found by visiting hivtest.org/takecharge or calling 1-800-CDC-INFO (1-800-232-4636).

Deposition characteristics of titanium coating deposited on SiC fiber by cold-wall chemical vapor deposition

Energy Technology Data Exchange (ETDEWEB)

Luo, Xian, E-mail: luo_shenfan@hotmail.com; Wu, Shuai; Yang, Yan-qing; Jin, Na; Liu, Shuai; Huang, Bin

2016-12-01

The deposition characteristics of titanium coating on SiC fiber using TiCl{sub 4}-H{sub 2}-Ar gas mixture in a cold-wall chemical vapor deposition were studied by the combination of thermodynamic analysis and experimental studies. The thermodynamic analysis of the reactions in the TiCl{sub 4}-H{sub 2}-Ar system indicates that TiCl{sub 4} transforms to titanium as the following paths: TiCl{sub 4} → TiCl{sub 3} → Ti, or TiCl{sub 4} → TiCl{sub 3} → TiCl{sub 2} → Ti. The experimental results show that typical deposited coating contains two distinct layers: a TiC reaction layer close to SiC fiber and titanium coating which has an atomic percentage of titanium more than 70% and that of carbon lower than 30%. The results illustrate that a carbon diffusion barrier coating needs to be deposited if pure titanium is to be prepared. The deposition rate increases with the increase of temperature, but higher temperature has a negative effect on the surface uniformity of titanium coating. In addition, appropriate argon gas flow rate has a positive effect on smoothing the surface morphology of the coating. - Highlights: • Both thermodynamic analysis and experimental studies were adopted in this work. • The transformation paths of TiCl{sub 4} to Ti is: TiCl{sub 4} → TiCl{sub 3} → Ti, or TiCl{sub 4} → TiCl{sub 3} → TiCl{sub 2} → Ti. • Typical deposited Ti coating on SiC fiber contained two distinct layers. • Deposition temperature is important on deposition rate and morphologies. • Appropriate argon gas flow rate has a positive effect on smoothing of the coating.

Placement of a take-out container during meal influences energy intake.

Science.gov (United States)

Bates, Kate J; Byker Shanks, Carmen

2015-12-01

A growing body of research suggests that increased portion sizes are contributing to the rising rates of obesity. However, studies that focus on environmental cues to promote portion control are relatively limited. Thus, a randomized study was conducted in a controlled laboratory setting to determine if the presence of a take-out container, given at the start of a meal, would prompt experimental group participants to decrease the portion of food consumed and reduce energy intake. Outcomes were analyzed using descriptive statistics, independent t-tests, and analysis of covariance. Results showed that placing a take-out container with the test meal led to a significant difference in energy intake (p=0.000) when compared to the control group. Participants (n=25) who were given a take-out container with their test meal consumed an average of 90 kcal less than participants (n=25) who were not given the condition. These findings suggest that a to-go container may be utilized as an effective environmental cue for guiding consumers to control serving size when faced with over-sized portions at restaurants or other food outlets. Copyright © 2015 Elsevier Ltd. All rights reserved.

Deposition of Boron in Possible Evaporite Deposits in Gale Crate

Science.gov (United States)

Gasda, P. J.; Peets, E.; Lamm, S. N.; Rapin, W.; Lanza, N.; Frydenvang, J.; Clark, B. C.; Herkenhoff, K. E.; Bridges, J.; Schwenzer, S. P.; Haldeman, E. B.; Wiens, R. C.; Maurice, S.; Clegg, S. M.; Delapp, D.; Sanford, V.; Bodine, M. R.; McInroy, R.

2017-12-01

Boron has been previously detected in Gale crater using the ChemCam instrument on board the NASA Curiosity rover within calcium sulfate fracture fill hosted by lacustrine mudstone and eolian sandstone units. Recent results show that up to 300 ppm B is present in the upper sections of the lacustrine unit. Boron has been detected in both the groundwater-emplaced calcium sulfate fracture fill materials and bedding-parallel calcium sulfate layers. The widespread bedding-parallel calcium sulfate layers within the upper strata of the lacustrine bedrock that Curiosity has encountered recently could be interpreted as primary evaporite deposits. We have two hypotheses for the history of boron in Gale crater. In both hypotheses, borates were first deposited as lake water evaporated, depositing primary evaporates that were later re-dissolved by groundwater, which redistributed the boron into secondary evaporitic calcium sulfate fracture fill deposits. In the first scenario, Gale crater may have undergone a period of perennial lake formation during a drier period of martian history, depositing layers of evaporitic minerals (including borates) among lacustrine mudstone layers. In the second scenario, lake margins could have become periodically exposed during cyclic drops in lake level and subsequently desiccated. Evaporites were deposited and desiccation features were formed in lowstand deposits. Either hypothetical scenario of evaporite deposition would promote prebiotic chemical reactions via wet-dry cycles. Boron may be an important prebiotic element, and as such, its presence in ancient martian surface and groundwater provides evidence that important prebiotic chemical reactions could occur on Mars if organics were present. The presence of boron in ancient Gale crater groundwater also provides additional evidence that a habitable environment existed in the martian subsurface well after the expected disappearance of liquid water on the surface of Mars. We will report on the

Interdisciplinary Design Studio Education: Place through the activity of play

Directory of Open Access Journals (Sweden)

Fatos Adiloglu

2011-09-01

Full Text Available This paper discusses the activity of play in design education among university students with interdisciplinary background. The study subscribes to social theories of learning and takes into account an international summer school which brought visual communication design and architecture students and instructors together at the intersection of design in Istanbul asking such questions: How can student learning activity in design education are fostered? How can studio experience be formulated to cultivate the understanding of place? In this study the international group acted as a learning community. Istanbul served at her best offering her potential for making connections through exploration and discovery. The paper casts student tasks formulated as playful graphic expression and reflects student statements, unfolding connections made across filters of space, time and movement in the working process of visual design studio. The particular design studio experiences uncover how students reconstructed their own texts. The study as a result releases the fact that one might best come to know a place through the activity of play and this kind of knowing is one that constantly evolving.

Plasma and Ion Assistance in Physical Vapor Deposition: A Historical Perspective

International Nuclear Information System (INIS)

Anders, Andre

2007-01-01

Deposition of films using plasma or plasma-assist can be traced back surprisingly far, namely to the 18th century for arcs and to the 19th century for sputtering. However, only since the 1960s the coatings community considered other processes than evaporation for large scale commercial use. Ion Plating was perhaps the first important process, introducing vapor ionization and substrate bias to generate a beam of ions arriving on the surface of the growing film. Rather independently, cathodic arc deposition was established as an energetic condensation process, first in the former Soviet Union in the 1970s, and in the 1980s in the Western Hemisphere. About a dozen various ion-based coating technologies evolved in the last decades, all characterized by specific plasma or ion generation processes. Gridded and gridless ion sources were taken from space propulsion and applied to thin film deposition. Modeling and simulation have helped to make plasma and ions effects to be reasonably well understood. Yet--due to the complex, often non-linear and non-equilibrium nature of plasma and surface interactions--there is still a place for the experience plasma 'sourcerer'

Place in transition

DEFF Research Database (Denmark)

Mikkelsen, Jacob Bjerre; Lange, Ida Sofie Gøtzsche

2017-01-01

World. This paper discusses the conception of place in the Oil World, with the relocation and transformation of oil rigs from an urban design perspective as its point of departure, using Esbjerg, Denmark, as a case study. Combining a theoretical understanding of places as relational with a design...

Dzhezkazgan and associated sandstone copper deposits of the Chu-Sarysu basin, Central Kazakhstan

Science.gov (United States)

Box, Stephen E.; Seltmann, Reimar; Zientek, Michael L.; Syusyura, Boris; Creaser, Robert A.; Dolgopolova, Alla

2012-01-01

Sandstone-hosted copper (sandstone Cu) deposits occur within a 200-km reach of the northern Chu-Sarysu basin of central Kazakhstan (Dzhezkazgan and Zhaman-Aibat deposits, and the Zhilandy group of deposits). The deposits consist of Cu sulfide minerals as intergranular cement and grain replacement in 10 ore-bearing members of sandstone and conglomerate within a 600- to 1,000-m thick Pennsylvanian fluvial red-bed sequence. Copper metal content of the deposits ranges from 22 million metric tons (Mt, Dzehzkazgan) to 0.13Mt (Karashoshak in the Zhilandy group), with average grades of 0.85 to 1.7% Cu and significant values for silver (Ag) and rhenium (Re). Broader zones of iron reduction (bleaching) of sandstones and conglomerates of the red-bed sequence extend over 10 km beyond each of the deposits along E-NE-trending anticlines, which began to form in the Pennsylvanian. The bleached zones and organic residues within them are remnants of ormer petroleum fluid accumulations trapped by these anticlines. Deposit sites along these F1anticlines are localized at and adjacent to the intersections of nearly orthogonal N-NW-trending F2synclines. These structural lows served to guide the flow of dense ore brines across the petroleum-bearing anticlines, resulting in ore sulfide precipitation where the two fluids mixed. The ore brine was sourced either from the overlying Early Permian lacustrine evaporitic basin, whose depocenter occurs between the major deposits, or from underlying Upper Devonian marine evaporites. Sulfur isotopes indicate biologic reduction of sulfate but do not resolve whether the sulfate was contributed from the brine or from the petroleum fluids. New Re-Os age dates of Cu sulfides from the Dzhezkazgan deposit indicate that mineralization took place between 299 to 309 Ma near the Pennsylvanian-Permian age boundary. At the Dzhezkazgan and some Zhilandy deposits, F2fold deformation continued after ore deposition. Copper orebodies in Lower Permian

Designed Places

DEFF Research Database (Denmark)

Stender, Marie

The 2008 financial crisis has left traces in the built environment of Copenhagen like many other places: Building projects are left unfinished or their function or finish is changed due to new economic circumstances. An ethnographic exploration of these traces exposes central aspects of what is a......, and when the ceilings leak water, the residents suspect it to be a consequence of the crisis. The paper discusses how market forces interact with the material surroundings we inhabit and explores the relationship between controlled and uncontrollable in the design of places....

Virtual harm reduction efforts for Internet gambling: effects of deposit limits on actual Internet sports gambling behavior.

Science.gov (United States)

Broda, Anja; LaPlante, Debi A; Nelson, Sarah E; LaBrie, Richard A; Bosworth, Leslie B; Shaffer, Howard J

2008-08-06

In an attempt to reduce harm related to gambling problems, an Internet sports betting service provider, bwin Interactive Entertainment, AG (bwin), imposes limits on the amount of money that users can deposit into their online gambling accounts. We examined the effects of these limits on gambling behavior. We compared (1) gambling behavior of those who exceeded deposit limits with those who did not, and (2) gambling behavior before and after exceeding deposit limits. We analyzed 2 years of the actual sports gambling behavior records of 47000 subscribers to bwin. Only 160 (0.3%) exceeded deposit limits at least once. Gamblers who exceeded deposit limits evidenced higher average number of bets per active betting day and higher average size of bets than gamblers who did not exceed deposit limits. Comparing the gambling behavior before and after exceeding deposit limits revealed slightly more unfavorable gambling behavior after exceeding deposit limits. Our findings indicate that Internet gamblers who exceed deposit limits constitute a group of bettors willing to take high risks; yet, surprisingly, they appear to do this rather successfully because their percentage of losses is lower than others in the sample. However, some of these gamblers exhibit some poor outcomes. Deposit limits might be necessary harm reduction measures to prevent the loss of extremely large amounts of money and cases of bankruptcy. We discuss how these limits might be modified based on our findings.

Virtual harm reduction efforts for Internet gambling: effects of deposit limits on actual Internet sports gambling behavior

Directory of Open Access Journals (Sweden)

Nelson Sarah E

2008-08-01

Full Text Available Abstract Background In an attempt to reduce harm related to gambling problems, an Internet sports betting service provider, bwin Interactive Entertainment, AG (bwin, imposes limits on the amount of money that users can deposit into their online gambling accounts. We examined the effects of these limits on gambling behavior. Methods We compared (1 gambling behavior of those who exceeded deposit limits with those who did not, and (2 gambling behavior before and after exceeding deposit limits. We analyzed 2 years of the actual sports gambling behavior records of 47000 subscribers to bwin. Results Only 160 (0.3% exceeded deposit limits at least once. Gamblers who exceeded deposit limits evidenced higher average number of bets per active betting day and higher average size of bets than gamblers who did not exceed deposit limits. Comparing the gambling behavior before and after exceeding deposit limits revealed slightly more unfavorable gambling behavior after exceeding deposit limits. Conclusion Our findings indicate that Internet gamblers who exceed deposit limits constitute a group of bettors willing to take high risks; yet, surprisingly, they appear to do this rather successfully because their percentage of losses is lower than others in the sample. However, some of these gamblers exhibit some poor outcomes. Deposit limits might be necessary harm reduction measures to prevent the loss of extremely large amounts of money and cases of bankruptcy. We discuss how these limits might be modified based on our findings.

Volcanic flows versus water- and ice-related outburst deposits in eastern Hellas: A comparison

Science.gov (United States)

Voelker, M.; Hauber, E.; Stephan, K.; Jaumann, R.

2018-06-01

Hellas Planitia is one of the major topographic sinks on Mars for the deposition of any kind of sediments. We report on our observations of sheet deposits in the eastern part of the basin that are apparently related to the Dao Vallis outflow channel. The deposits have lobate flow fronts and a thickness of a few decameters. Despite their generally smooth surface, some distinctive textures and patterns can be identified, such as longitudinal lineations, distributive channels, and polygons. We compared these deposits to other sheet deposits on Mars and tested three hypotheses of their origin: volcanic flows as well as water- and ice-related mass wastings. Despite some similarities to volcanic sheet flows on Mars, we found several morphological characteristics that are not known for sheet lava flows; for example conically arranged lineations and channel systems very similar to fluvial incisions. We also reject an ice-related formation similar to terrestrial rock-ice avalanches, as there is no sufficient relief energy to explain their extent and location. A water-related origin appears most consistent with our observations, and we favor an emplacement by fluvially-driven mass wasting processes, e.g., debris flows. Assuming a water-related origin, we calculated the amount of water that would be required to deposit such large sedimentary bodies for different flow types. Our calculations show a large range of possible water volumes, from 64 to 2,042 km³, depending on the specific flow mechanism. The close link to Dao Vallis makes these deposits a unique place to study the deposition of outflow channel sediments, as the deposits of other outflow channels on Mars, such as those around Chryse Planitia, are mostly buried by younger sediments and volcanic flows.

Two Concepts Of Place Competition And Specificity Of Targeting In Place Marketing

OpenAIRE

Kirill Rozhkov

2013-01-01

This paper demonstrates opportunities for the development of the place marketing theory given by pure model of local expenditures (Tiebout 1956) and concepts of the creative class (Florida 2004) and creative city (Bianchini and Landry 1995). Rethinking them in marketing terms, we then analyze their limitations and show why their re-examining can support competition analysis, targeting, and marketing policy of places. In the discussion section, main directions of theoretical research in place ...

Hadron therapy takes off in Europe

CERN Multimedia

CERN Bulletin

2011-01-01

A joint meeting of ULICE, ENLIGHT and PARTNER recently took place in Marburg (Germany). The three initiatives are shaping both the present and the future of hadron therapy in Europe, where new cutting-edge facilities have started to fight cancer with beams of protons and carbon ions.   A pictorial representation of a raster scan on a tumour. (Photo courtesy of HIT/GSI/Siemens.) Thanks to a very active multidisciplinary community consisting of physicists, biologists, radiobiologists, engineers, IT specialists and medical doctors, hadron therapy is taking off in Europe. Indeed, after a few decades during which the innovative technique was mainly used experimentally in Japan, the US and a couple of pioneering laboratory-based facilities in Europe, today an increasing number of hospitals are being equipped with synchrotrons and dedicated treatment rooms. “Asia and Europe are at the forefront of research and use of carbon ions in the treatment of some rare and radio-resistant t...

Taking CERN physics to South Asia

CERN Multimedia

Abha Eli Phoboo

2015-01-01

CERN physicists travelled to South Asia last month to bring a plethora of particle physics events to schools, universities and public venues. The initiative was the first of its kind in the region, and brought CERN particle physics to a new audience in Nepal and India.   Kathmandu University students take part in an ATLAS virtual visit. On 19 December 2014, students from Kathmandu University and Tribhuvan University, Nepal and 16 schools in Punjab, India took part in a joint virtual visit to ATLAS. The visit, which was the first of its kind in South Asia, followed a two-day Masterclass in particle physics that took place simultaneously in the two countries. The Masterclass was organised as a part of Physics Without Frontiers, an International Centre for Theoretical Physics project in partnership with CERN. Besides the Masterclass, physics workshops led by ATLAS physicists Kate Shaw, Joerg Stelzer and Suyog Shrestha were held for high school students and science teachers in three different d...

The Role of Siliceous Hydrothermal Breccias in the Genesis of Volcanic Massive Sulphide Deposits - Ancient and Recent Systems

Science.gov (United States)

Costa, I. A.; Barriga, F. J.; Fouquet, Y.

2014-12-01

hydrothermal deposits, comparison with ancient volcanic massive sulphide deposits is appropriate. The proposed model can explain some of the processes taking place in the early phase of formation of old deposits where equivalent siliceous material is found in the hanging wall of the ore bodies (e.g. Barriga and Fyfe, 1988).

Management and communication courses – Places available

CERN Multimedia

2014-01-01

Please note that there are some places available on the following management and communication courses starting in September or October.   For more information on the course, click on the course title, which will take you to the training catalogue. You can then sign up on line.  .tftable {color:#333333;width:100%;border-width: 1px;border-color: #a9a9a9;border-collapse: collapse;} .tftable th {background-color:#cdcdcd;border-width: 1px;padding: 8px;border-style: solid;border-color: #a9a9a9;text-align:left;} .tftable tr {background-color:#ffffff;} .tftable td {border-width: 1px;padding: 8px;border-style: solid;border-color: #a9a9a9;} Course Next session Duration Language Availability Managing Time 15 September 9 October 7 November 20 hours English 2 Managing Stress 6 October 7 October 16 hours English 5  

Extreme physics take a quantum leap... to the edge of science

CERN Document Server

Basher, Simon

2013-01-01

In Basher's totally hip and quirky style, readers are introduced to the amazing research that is revolutionizing physics! From the pioneering experiments taking place in the Hadron Collider to NASAs deep-space exploration, "Basher Science: Extreme Physics "highlights the realm of miniscule things that was discovered in the early 1900s by scientists who were on the hunt for teeny-tiny parts of matter, the bits from which all larger things are made. This wild, uncertain world is bursting with crazy characters you're about to meet-youre gonna love them!

Take your blood pressure to heart! Screening programme 13-17 October

CERN Multimedia

2014-01-01

The silent health threat, high blood pressure, can only be detected by regular blood pressure tests. In Switzerland, one in four people suffer from high blood pressure without being aware of it.  A screening programme will take place from 13 to 17 October 2014 at the Medical Service Infirmary, Building 57, from 9 a.m. to 12 p.m. and from 1.30 to 4.30 p.m. Blood pressure tests, advice and general information on high blood pressure will be available to everyone working at CERN. Medical Service

Chemical vapour deposition of vanadium oxide thermochromic thin films

OpenAIRE

Piccirillo, Clara

2012-01-01