WorldWideScience

Sample records for dependent refractive index

  1. Dependence of Physical Parameters of Compound Semiconductors on Refractive Index

    Directory of Open Access Journals (Sweden)

    R.R. Reddy

    2003-07-01

    Full Text Available Interesting relationships have been found between refractive index, plasmon energy, electronic polarisability, bond length, microhardness, bulk modulus, force constants and lattice energy. An attempt has been made for the first time to correlate only one physical parameter with others. The calculated values are in good agreement with the experimental values as well as with the values reported in the literature. Refractive index data is the only one parameter required to estimate all the above parameters.

  2. Measurement of the magnetic field-dependent refractive index of magnetic fluids in bulk

    Institute of Scientific and Technical Information of China (English)

    Ting Liu; Xianfeng Chen; Ziyun Di; Junfeng Zhang; Xinwan Li; Jianping Chen

    2008-01-01

    An optical alignment-free and highly accurate method is employed to measure the magnetic field-dependent refractive index of magnetic fluid(MF) in bulk.The measured refractive index decreases significantly with the increasing magnetic strength and then tends to saturate in the high intensity range.By applying a tunable magnetic field ranging between 0 and 1661 Oe,the maximum shift of the refractive index of MF in bulk iS found to be 0.0231.

  3. Size dependence of complex refractive index function of growing nanoparticles

    Science.gov (United States)

    Eremin, A.; Gurentsov, E.; Popova, E.; Priemchenko, K.

    2011-08-01

    The evidence of the change of the complex refractive index function E( m) of carbon and iron nanoparticles as a function of their size was found from two-color time-resolved laser-induced incandescence (TiRe-LII) measurements. Growing carbon particles were observed from acetylene pyrolysis behind a shock wave and iron particles were synthesized by pulse Kr-F excimer laser photo-dissociation of Fe(CO)5. The magnitudes of refractive index function were found through the fitting of two independently measured values of particle heat up temperature, determined by two-color pyrometry and from the known energy of the laser pulse and the E( m) variation. Small carbon particles of about 1-14 nm in diameter had a low value of E( m)˜0.05-0.07, which tends to increase up to a value of 0.2-0.25 during particle growth up to 20 nm. Similar behavior for iron particles resulted in E( m) rise from ˜0.1 for particles 1-3 nm in diameter up to ˜0.2 for particles >12 nm in diameter.

  4. Measurement of Linear Coefficient of Thermal Expansion and Temperature-Dependent Refractive Index Using Interferometric System

    Science.gov (United States)

    Corsetti, James A.; Green, William E.; Ellis, Jonathan D.; Schmidt, Greg R.; Moore, Duncan T.

    2017-01-01

    A system combining an interferometer with an environmental chamber for measuring both coefficient of thermal expansion (CTE) and temperature-dependent refractive index (dn/dT) simultaneously is presented. The operation and measurement results of this instrument are discussed.

  5. The temperature dependence of refractive index of hemoglobin at the wavelengths 930 and 1100 nm

    Science.gov (United States)

    Lazareva, Ekaterina N.; Tuchin, Valery V.

    2016-04-01

    In this study, the refractive index of hemoglobin was measured at different temperatures within a physiological range and above that is characteristic to light-blood interaction at laser therapy. Measurements were carried out using the multi-wavelength Abbe refractometer (Atago, Japan). The refractive index was measured at two NIR wavelengths of 930 nm and 1100 nm. Samples of hemoglobin solutions with concentration of 80, 120 and 160 g/l were investigated. The temperature was varied between 25 and 55 °C. It was shown that the dependence of the refractive index of hemoglobin is nonlinear with temperature, which may be associated with changes in molecular structure of hemoglobin.

  6. The Raman Contribution to the Intensity Dependent Refractive Index in Optical Fibers

    DEFF Research Database (Denmark)

    Pedersen, Martin Erland Vestergaard; Pálsson, Tómas; Jespersen, Kim G.

    2011-01-01

    We report on the Raman contribution to the intensity dependent refractive index in step-index fibers with germanium doped silica core. The fR value is found to be 0.157 ± 0.07 for a field weighted germanium concentration between 5 and 25 mol %.......We report on the Raman contribution to the intensity dependent refractive index in step-index fibers with germanium doped silica core. The fR value is found to be 0.157 ± 0.07 for a field weighted germanium concentration between 5 and 25 mol %....

  7. Spectral dependence of the refractive index of single-crystalline GaAs for optical applications

    Energy Technology Data Exchange (ETDEWEB)

    Plotnichenko, V G; Nazaryants, V O; Kryukova, E B; Dianov, E M, E-mail: victor@fo.gpi.ac.r [Fibre Optics Research Center of the Russian Academy of Sciences, 38 Vavilov Street, Moscow 119333 (Russian Federation)

    2010-03-17

    The refractive index of crystalline GaAs is measured by the method of interference refractometry in the wavenumber range from 10 500 to 540 cm{sup -1} (or the wavelength range from 0.9 to 18.6 {mu}m) with a resolution of 0.1 cm{sup -1}. The measurement results are approximated by the generalized Cauchy dispersion formula of the 8th power. Spectral wavelength dependences of the first- and second-order derivatives of the refractive index are calculated, and the zero material dispersion wavelength is found to be {lambda}{sub 0} = 6.61 {mu}m. Using three GaAs plates of different thicknesses we managed to raise the refractive index measurement accuracy up to 4 x 10{sup -4} or 0.02%, being nearly by an order of magnitude better than the data available.

  8. Sensitivity Dependence of Surface Plasmon Resonance Based Sensors on Prism Refractive Index

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    We theoretically and experimentally demonstrate that refractive index of the prism used toload metal film has significant influence on sensitivity of surface plasmon resonance based sensors. Theprism with lower refractive index gives the sensors a higher sensitivity in detecting refractive index varia-tions of a sample. We attribute this effect to the fact that a prism with low refractive index will increasecoupling distance between surface plasmons and the medium under investigation.

  9. Uniform Refraction in Negative Refractive Index Materials

    CERN Document Server

    Gutierrez, Cristian E

    2015-01-01

    We study the problem of constructing an optical surface separating two homogeneous, isotropic media, one of which has a negative refractive index. In doing so, we develop a vector form of Snell's law, which is used to study surfaces possessing a certain uniform refraction property, both in the near and far field cases. In the near field problem, unlike the case when both materials have positive refractive index, we show that the resulting surfaces can be neither convex nor concave.

  10. Refractive index based measurements

    DEFF Research Database (Denmark)

    2014-01-01

    A refractive index based measurement of a property of a fluid is measured in an apparatus comprising a variable wavelength coherent light source (16), a sample chamber (12), a wavelength controller (24), a light sensor (20), a data recorder (26) and a computation apparatus (28), by - directing...

  11. Refractive index based measurements

    DEFF Research Database (Denmark)

    2014-01-01

    In a method for performing a refractive index based measurement of a property of a fluid such as chemical composition or temperature by observing an apparent angular shift in an interference fringe pattern produced by back or forward scattering interferometry, ambiguities in the measurement caused...

  12. Refractive index based measurements

    DEFF Research Database (Denmark)

    2014-01-01

    In a method for performing a refractive index based measurement of a property of a fluid such as chemical composition or temperature, a chirp in the local spatial frequency of interference fringes of an interference pattern is reduced by mathematical manipulation of the recorded light intensity...

  13. Uniform refraction in negative refractive index materials.

    Science.gov (United States)

    Gutiérrez, Cristian E; Stachura, Eric

    2015-11-01

    We study the problem of constructing an optical surface separating two homogeneous, isotropic media, one of which has a negative refractive index. In doing so, we develop a vector form of Snell's law, which is used to study surfaces possessing a certain uniform refraction property, in both the near- and far-field cases. In the near-field problem, unlike the case when both materials have positive refractive indices, we show that the resulting surfaces can be neither convex nor concave.

  14. Compositional dependence of optical band gap and refractive index in lead and bismuth borate glasses

    Energy Technology Data Exchange (ETDEWEB)

    Mallur, Saisudha B.; Czarnecki, Tyler; Adhikari, Ashish; Babu, Panakkattu K.

    2015-08-15

    Highlights: • Refractive indices increase with increasing PbO/Bi{sub 2}O{sub 3} content. • Optical band gap arises due to direct forbidden transition. • Optical band gaps decrease with increasing PbO/Bi{sub 2}O{sub 3} content. • New empirical relation between the optical band gap and the refractive index. - Abstract: We prepared a series of lead and bismuth borate glasses by varying PbO/Bi{sub 2}O{sub 3} content and studied refractive index and optical band gap as a function of glass composition. Refractive indices were measured very accurately using a Brewster’s angle set up while the optical band gaps were determined by analyzing the optical absorption edge using the Mott–Davis model. Using the Lorentz–Lorentz method and the effective medium theory, we calculated the refractive indices and then compared them with the measured values. Bismuth borate glasses show better agreement between the calculated values of the refractive index and experimental values. We used a differential method based on Mott–Davis model to obtain the type of transition and optical band gap (E{sub opt}) which in turn was compared with the value of E{sub opt} obtained using the extinction coefficient. Our analysis shows that in both lead and bismuth borate glasses, the optical band gap arises due to direct forbidden transition. With increasing PbO/Bi{sub 2}O{sub 3} content, the absorption edge shifts toward longer wavelengths and the optical band gap decreases. This behavior can be explained in terms of changes to the Pb−O/Bi−O chemical bonds with glass composition. We obtained a new empirical relation between the optical band gap and the refractive index which can be used to accurately determine the electronic oxide polarizability in lead and bismuth oxide glasses.

  15. Negative refractive index metamaterials

    Directory of Open Access Journals (Sweden)

    Willie J. Padilla

    2006-07-01

    Full Text Available Engineered materials composed of designed inclusions can exhibit exotic and unique electromagnetic properties not inherent in the individual constituent components. These artificially structured composites, known as metamaterials, have the potential to fill critical voids in the electromagnetic spectrum where material response is limited and enable the construction of novel devices. Recently, metamaterials that display negative refractive index – a property not found in any known naturally occurring material – have drawn significant scientific interest, underscoring the remarkable potential of metamaterials to facilitate new developments in electromagnetism.

  16. Accurate calculation of the intensity dependence of the refractive index using polarized basis sets

    Science.gov (United States)

    Baranowska-Łączkowska, Angelika; Łączkowski, Krzysztof Z.; Fernández, Berta

    2012-01-01

    Using the single and double excitation coupled cluster level of theory (CCSD) and the density functional theory/Becke 3-parameter Lee-Yang and Parr (DFT/B3LYP) methods, we test the performance of the Pol, ZPol, and LPol-n (n = ds, dl, fs, fl) basis sets in the accurate description of the intensity dependence of the refractive index in the Ne atom, and the N2 and the CO molecules. Additionally, we test the aug-pc-n (n = 1, 2) basis sets of Jensen, and the SVPD, TZVPD, and QZVPD bases by Rappoport and Furche. Tests involve calculations of dynamic polarizabilities and frequency dependent second hyperpolarizabilities. The results are interpreted in terms of the medium constants entering the expressions for optically induced birefringences. In all achiral systems, the performance of the LPol-n sets is very good. Also the aug-pc-2 set yields promising results. Accurate CCSD results available in the literature allow us to select the best basis sets in order to carry out DFT/B3LYP calculations of medium constants in larger molecules. As applications, we show results for (R)-fluoro-oxirane and (R)-methyloxirane.

  17. Pressure dependence of the refractive index in wurtzite and rocksalt indium nitride

    Energy Technology Data Exchange (ETDEWEB)

    Oliva, R. [Institut Jaume Almera, Consell Superior d' Investigacions Científiques (CSIC), Lluís Solé i Sabarís s.n., 08028 Barcelona, Catalonia (Spain); MALTA-Consolider Team, Departament de Física Aplicada, ICMUV, Universitat de València, c/Dr. Moliner 50, 46100 Burjassot, València (Spain); Segura, A. [MALTA-Consolider Team, Departament de Física Aplicada, ICMUV, Universitat de València, c/Dr. Moliner 50, 46100 Burjassot, València (Spain); Ibáñez, J., E-mail: jibanez@ictja.csic.es; Artús, L. [Institut Jaume Almera, Consell Superior d' Investigacions Científiques (CSIC), Lluís Solé i Sabarís s.n., 08028 Barcelona, Catalonia (Spain); Yamaguchi, T.; Nanishi, Y. [Faculty of Science and Engineering, Ritsumeikan University, Shiga 525-8577 (Japan)

    2014-12-08

    We have performed high-pressure Fourier transform infrared reflectance measurements on a freestanding InN thin film to determine the refractive index of wurtzite InN and its high-pressure rocksalt phase as a function of hydrostatic pressure. From a fit to the experimental refractive-index curves including the effect of the high-energy optical gaps, phonons, free carriers, and the direct (fundamental) band-gap in the case of wurtzite InN, we obtain pressure coefficients for the low-frequency (electronic) dielectric constant ε{sub ∞}. Negative pressure coefficients of −8.8 × 10{sup −2 }GPa{sup −1} and −14.8 × 10{sup −2 }GPa{sup −1} are obtained for the wurtzite and rocksalt phases, respectively. The results are discussed in terms of the electronic band structure and the compressibility of both phases.

  18. Microstructured optical fiber refractive index sensor

    DEFF Research Database (Denmark)

    Town, Graham E.; McCosker, Ravi; Yuan, Scott Wu

    2010-01-01

    We describe a dual-core microstructured optical fiber designed for refractive index sensing of fluids. We show that by using the exponential dependence of intercore coupling on analyte refractive index, both large range and high sensitivity can be achieved in the one device. We also show...

  19. Microstructured optical fiber refractive index sensor

    DEFF Research Database (Denmark)

    Town, Graham E.; McCosker, Ravi; Yuan, Scott Wu

    2010-01-01

    We describe a dual-core microstructured optical fiber designed for refractive index sensing of fluids. We show that by using the exponential dependence of intercore coupling on analyte refractive index, both large range and high sensitivity can be achieved in the one device. We also show that sel...

  20. Temperature-Dependent Refractive Index Measurements of L-BBH2 Glass for the Subaru CHARIS Integral Field Spectrograph

    Science.gov (United States)

    Leviton, Douglas B.; Miller, Kevin H.; Quijada, Manuel A.; Groff, Tyler D.

    2015-01-01

    Using the Cryogenic High Accuracy Refraction Measuring System (CHARMS) at NASA's Goddard Space Flight Center, we have made the first cryogenic measurements of absolute refractive index for Ohara L-BBH2 glass to enable the design of a prism for the Coronagraphic High Angular Resolution Imaging Spectrograph (CHARIS) at the Subaru telescope. L-BBH2 is employed in CHARIS's prism design for improving the spectrograph's dispersion uniformity. Index measurements were made at temperatures from 110 to 305 K at wavelengths from 0.46 to 3.16 micron. We report absolute refractive index (n), dispersion (dn/d(lambda), and thermo-optic coefficient (dn/dT) for this material along with estimated single measurement uncertainties as a function of wavelength and temperature. We provide temperature-dependent Sellmeier coefficients based on our data to allow accurate interpolation of index to other wavelengths and temperatures within applicable ranges. This paper also speaks of the challenges in measuring index for a material which is not available in sufficient thickness to fabricate a typical prism for measurement in CHARMS, the tailoring of the index prism design that allowed these index measurements to be made, and the remarkable results obtained from that prism for this practical infrared material.

  1. Refractive Index of Fly Rhabdomeres

    NARCIS (Netherlands)

    Stavenga, D.G.

    1974-01-01

    The refractive index reported previously for the rhabdomeres of flies (1.349) has been corrected for waveguide effects. The presented correction method has yielded n1 = 1.365 ± 0.006. It is argued that an acceptable estimate for the refractive index of the inhomogeneous surroundings of fly

  2. Characterizing depth-dependent refractive index of articular cartilage subjected to mechanical wear or enzymic degeneration

    Science.gov (United States)

    Wang, Kuyu; Wu, Jianping; Day, Robert; Kirk, Thomas Brett; Hu, Xiaozhi

    2016-09-01

    Utilizing a laser scanning confocal microscope system, the refractive indices of articular cartilage (AC) with mechanical or biochemical degenerations were characterized to investigate whether potential correlations exist between refractive index (RI) and cartilage degeneration. The cartilage samples collected from the medial femoral condyles of kangaroo knees were mechanically degenerated under different loading patterns or digested in trypsin solution with different concentrations. The sequences of RI were then measured from cartilage surface to deep region and the fluctuations of RI were quantified considering combined effects of fluctuating frequency and amplitude. The compositional and microstructural alterations of cartilage samples were assessed with histological methods. Along with the loss of proteoglycans, the average RI of cartilage increased and the local fluctuation of RI became stronger. Short-term high-speed test induced little influence to both the depth fluctuation and overall level of RI. Long-term low-speed test increased the fluctuation of RI but the average RI was barely changed. The results substantially demonstrate that RI of AC varies with both compositional and structural alterations and is potentially an indicator for the degeneration of AC.

  3. Metamaterials and Negative Refractive Index

    National Research Council Canada - National Science Library

    D. R. Smith; J. B. Pendry; M. C. K. Wiltshire

    2004-01-01

    .... Artificial magnetism and negative refractive index are two specific types of behavior that have been demonstrated over the past few years, illustrating the new physics and new applications possible...

  4. Hybrid high refractive index polymer coatings

    Science.gov (United States)

    Wang, Yubao; Flaim, Tony; Mercado, Ramil; Fowler, Shelly; Holmes, Douglas; Planje, Curtis

    2005-04-01

    Thermally curable hybrid high refractive index polymer solutions have been developed. These solutions are stable up to 6 months under room temperature storage conditions and can be easily spin-coated onto a desired substrate. When cured at elevated temperature, the hybrid polymer coating decomposes to form a metal oxide-rich film that has a high refractive index. The resulting films have refractive indices higher than 1.90 in the entire visible region and achieve film thicknesses of 300-900 nm depending on the level of metal oxide loading, cure temperature being used, and number of coatings. The formed films show greater than 90% internal transmission in the visible wavelength (400-700 nm). These hybrid high refractive index films are mechanically robust, are stable upon exposure to both heat and UV radiation, and are currently being investigated for microlithographic patterning potential.

  5. Wavelength and NOx dependent complex refractive index of SOAs generated from the photooxidation of toluene

    Directory of Open Access Journals (Sweden)

    A. Yamazaki

    2012-06-01

    Full Text Available Recently, secondary organic aerosols (SOAs generated from anthropogenic volatile organic compounds have been proposed as a possible source of lightabsorbing organic compounds "brown carbon" in the urban atmosphere. However, the atmospheric importance of these SOAs remains unclear due to limited information about their optical properties. In this study, the complex refractive index (RI, m=n − ki values at 405, 532, and 781 nm of the SOAs generated during the photooxidation of toluene (toluene-SOAs under a variety of initial nitrogen oxide (NOx= NO + NO2 conditions were examined by photoacoustic spectroscopy (PAS and cavity ring down spectroscopy (CRDS. The complex RI values obtained in the present study and reported in the literature indicate that the k value, which represents the light absorption of the toluene-SOAs steeply increased to shorter wavelengths at n value gradually increased to shorter wavelengths from 781 to 355 nm. The k values at 405 nm were found to increase from 1.8 × 10−3 to 7.2 × 10−3 with increasing initial NOx concentration from 109 to 571 ppbv. The nitrate to organics ratio of the SOAs determined using a highresolution time-of-flight aerosol mass spectrometer (H-ToF-AMS also increased with increasing initial NOx concentration. The RI values of the SOAs generated during the photooxidation of 1,3,5-trimethylbenzene in the presence of NOx (1,3,5-TMB-SOAs were also determined to investigate the influence of the chemical structure of the precursor on the optical properties of the SOAs, and it was found that the light absorption of the 1,3,5-TMB-SOAs is negligible at all of the wavelengths investigated (405, 532, and 781 nm. These results can be reasonably explained by the hypothesis that nitro-aromatic compounds such as nitro-cresols are the major contributors to the light absorption of the toluene-SOAs. Using the obtained RI values, mass absorption cross sections of the toluene-SOAs at 405 and 532 nm were estimated to

  6. Temperature-Dependent Sellmeier Equation for Refractive Index of 1.0 mol % Mg-Doped Stoichiometric Lithium Tantalate

    Science.gov (United States)

    Lim, Hwan Hong; Kurimura, Sunao; Katagai, Toshio; Shoji, Ichiro

    2013-03-01

    Mg-doped stoichiometric lithium tantalate (SLT) is a promising material in high power generation, due to its high thermal conductivity. The accuracy of the temperature-dependent Sellmeier equation for Mg-doped SLT is important for designing high-power-frequency converters. We propose a temperature-dependent Sellmeier equation for the extraordinary refractive index of 1.0 mol % Mg-doped SLT. The equation is fitted with measured data in the first-order quasi-phase-matched (QPM) second harmonic generation (SHG) and optical parametric oscillation (OPO) with the fundamental and pump wavelengths being both 1.064 µm and previously published data [Jpn. J. Appl. Phys. 41 (2002) 465] of SLT. The equation allows us to predict accurate QPM periods in the range of 0.5-4 µm wavelength and in temperature range of 30-170 °C.

  7. Thickness-dependent dispersion parameters, energy gap and nonlinear refractive index of ZnSe thin films

    Energy Technology Data Exchange (ETDEWEB)

    Prakash, Deo [School of Computer Science & Engineering, Faculty of Engineering, SMVD University, Kakryal, Katra 182320, J& K (India); Shaaban, E.R., E-mail: esam_ramadan2008@yahoo.com [Physics Department, Faculty of Science, Al-Azhar University, Assiut 71542 (Egypt); Shapaan, M. [Department of Physics, Faculty of Science, Al-Azahar University, Cairo (Egypt); Mohamed, S.H. [Physics Department, Faculty of Science, Sohag University, 82524 Sohag (Egypt); Othman, A.A. [Physics Department, Faculty of Science, Assiut University, Assiut 71516 (Egypt); Verma, K.D., E-mail: kdverma1215868@gmail.com [Material Science Research Laboratory, Department of Physics, S. V. College, Aligarh 202001, U.P. (India)

    2016-08-15

    Highlights: • Combined experimental and theoretical researches on ZnSe Thin Films. • The film thickness and refractive index were determined using envelope method. • The absorption coefficient and the energy gap were calculated. • Dispersion parameters were determined using Wemple-DiDomenico relation. • The third order susceptibility and nonlinear refractive index were calculated. - Abstract: Zinc selenide (ZnSe) thin films with different thicknesses were evaporated onto glass substrates using the thermal evaporation technique. X-ray diffraction analysis confirmed that both the film and powder have cubic zinc-blende structure. The fundamental optical parameters like absorption coefficient, extinction coefficient and band gap were evaluated in transparent region of transmittance and reflectance spectrum. The optical transition of the films was found to be allowed, where the energy gap increased from 2.576 to 2.702 eV with increasing film thickness. Also, the refractive index value increase with increasing film thickness. The refractive indices evaluated through envelope method were extrapolated by Cauchy dispersion relationship over the whole spectra range. Additionally, the dispersion of refractive index was determined in terms of Wemple-DiDomenico single oscillator model. Third order susceptibility and nonlinear refractive index were determined for different thickness of ZnSe thin films.

  8. Frequency analysis of temperature-dependent interferometric signal for the measurement of the temperature coefficient of refractive index

    Science.gov (United States)

    Zhou, Jianqin; Shen, Jun; Neill, W. Stuart

    2016-07-01

    A method of frequency analysis for the measurement of the temperature coefficient of refractive index (dn/dT) using a Fabry-Perot interferometer was developed and tested against ethanol and water. The temperature-dependent interferometric signal described by Airy's formula was analyzed in both the temperature and frequency domains. By fast Fourier transform, a low-pass filter was designed and employed to eliminate the noise superimposed on the signal. dn/dT was determined accurately from the noise-removed signal by peak analysis. Furthermore, the signal frequency parameters may be utilized for the material thermophysical property characterization. This method lays the foundation for an online dn/dT instrument for monitoring chemical processes.

  9. Modification of Low Refractive Index Polycarbonate for High Refractive Index Applications

    Directory of Open Access Journals (Sweden)

    Gunjan Suri

    2009-01-01

    Full Text Available Polycarbonates and polythiourethanes are the most popular materials in use today, for optical applications. Polycarbonates are of two types which fall in the category of low refractive index and medium refractive index. The present paper describes the conversion of low refractive index polycarbonates into high refractive index material by the use of a high refractive index monomer, polythiol, as an additive. Novel polycarbonates, where the properties of refractive index and Abbe number can be tailor made, have been obtained. Thermal studies and refractive index determination indicate the formation of a new polymer with improved properties and suitable for optical applications.

  10. Minimal dispersion refractive index profiles.

    Science.gov (United States)

    Feit, M D

    1979-09-01

    The analogy between optics and quantum mechanics is exploited by considering a 2-D quantum system whose Schroedinger equation is closely related to the wave equation for light propagation in an optical fiber. From this viewpoint, Marcatili's condition for minimal-dispersion-refractive-index profiles, and the Olshansky- Keck formula for rms pulse spreading in an alpha-profile fiber may be derived without recourse to the WKB approximation. Besides affording physical insight into these results, the present approach points out a possible limitation in their application to real fibers.

  11. Spectral Dependence of the Refractive Index of Magneto-Optical Metamaterials

    Science.gov (United States)

    Kozik, S. E.; Smirnov, A. G.

    2017-01-01

    A new approach is proposed for determining the optical properties of metamaterials with a complex unit cell geometry. It is based on the concept of an effective dielectric constant ɛeff (ω) and magnetic permeability μeff (ω) as a sum of Lorentzian functions, each of which is responsible for a certain dipole or multipole resonance of the structure. It is found that for "fishnet" metamaterials the spectral dependences ɛeff (ω) and magnetic permeability μeff (ω) are determined by a small number of resonances. This approach is used to calculate the effective dielectric constant and magnetic permeability of metamaterials with ordered and disordered unit cells. The spectra obtained by this analytical model are in good agreement with numerical simulations.

  12. Negative refractive index in chiral metamaterials.

    Science.gov (United States)

    Zhang, Shuang; Park, Yong-Shik; Li, Jensen; Lu, Xinchao; Zhang, Weili; Zhang, Xiang

    2009-01-16

    We experimentally demonstrate a chiral metamaterial exhibiting negative refractive index at terahertz frequencies. The presence of strong chirality in the terahertz metamaterial lifts the degeneracy for the two circularly polarized waves and allows for the achievement of negative refractive index without requiring simultaneously negative permittivity and negative permeability. The realization of terahertz chiral negative index metamaterials offers opportunities for investigation of their novel electromagnetic properties, such as negative refraction and negative reflection, as well as important terahertz device applications.

  13. Uncladded sensing fiber for refractive index measurement

    Science.gov (United States)

    Bhardwaj, V.; Gangwar, R. K.; Pathak, A. K.; Singh, V. K.

    2016-05-01

    The formation of chemically etched optical fiber for use in refractive index sensor is addressed. This presented design of a refractive index (RI) sensor is based on recording the power loss exhibited by radiation propagating through an etched multimode fiber (MMF) immersed in the liquid under study. The decreasing diameters of fibers are found to be strongly dependent on the temperature and etchant composition. This experiment was performed for different unclad etched fibers for same sensing length and the RI changes from 1.33 RIU to 1.38 RIU. When the multimode fiber (MMF) is etched for 12 hours the sensitivity of the sensor is approximately 204.25dBm/RIU, which is larger than without etched fiber having sensitivity 127.2dBm/RIU.

  14. Effective nonlinear refractive index of nano-porous silicon and its dependence on porosity and light wavelength

    Science.gov (United States)

    Bazaru, Tatiana; Vlad, Valentin I.; Petris, Adrian; Miu, Mihaela

    2010-05-01

    In this paper, we study the dependence of effective optical linear and nonlinear refractive indices of nano-porous silicon layers on crystalline silicon substrates on fill fraction, at different light wavelengths in visible and near-infrared. Simple approximative formulae, in the frame of Bruggeman's formalism, that describe the dependences of effective optical linear and nonlinear refractive indices of nano-porous silicon on fill fractions and on wavelength, in the range of 620 - 1000 nm, are derived. Experimental results with reflection intensity scan show a good agreement with the data provided by our formulae and the exact results of Boyd-Bruggeman's formalism for the third order nonlinearity, in the case nanoporous silicon with different porosity and at light wavelengths in the mentioned spectral range.

  15. Negative Index of Refraction in Optical Metamaterials

    CERN Document Server

    Shalaev, V M; Chettiar, U; Yuan, H K; Sarychev, A K; Drachev, V P; Kildishev, A V; Shalaev, Vladimir M.; Cai, Wenshan; Chettiar, Uday; Yuan, Hsiao-Kuan; Sarychev, Andrey K.; Drachev, Vladimir P.; Kildishev, Alexander V.

    2005-01-01

    An array of pairs of parallel gold nanorods is shown to have a negative refractive index in the optical range, close to a wavelength of 1 micron. Such behavior results from the plasmon resonance in the pairs of nanorods for both the electric and magnetic components of light. The metal rods act as inductive elements whereas the dielectric gaps perform as capacitive elements, forming an optical LC-circuit. Our experiments and simulations demonstrate the resonant behavior for an index of refraction. Above the resonance, the refractive index becomes negative. Paired metal nanorods open new opportunities for developing negative-refraction materials in optics.

  16. Cryogenic Temperature-dependent Refractive Index Measurements of N-BK7, BaLKN3, and SF15 for NOTES PDI

    Science.gov (United States)

    Frey, Bradley J.; Leviton, Douglas F.; Madison, Timothy J.

    2007-01-01

    In order to enable high quality lens designs using N-BK7, BaLKN3, and SF15 at cryogenic temperatures, we have measured the absolute refractive index of prisms of these three materials using the Cryogenic, High-Accuracy Refraction Measuring System (CHARMS) at NASA's Goddard Space Flight Center, as a function of both wavelength and temperature. For N-BK7, we report absolute refractive index and thermo-optic coefficient (dn/dT) at temperatures ranging from 50 to 300 K at wavelengths from 0.45 to 2.7 micrometers; for BaLKN3 we cover temperatures ranging from 40 to 300 K and wavelengths from 0.4 to 2.6 micrometers; for SF15 we cover temperatures ranging from 50 to 300 K and wavelengths from 0.45 to 2.6 micrometers. We compare our measurements with others in the literature and provide temperature-dependent Sellmeier coefficients based on our data to allow accurate interpolation of index to other wavelengths and temperatures. While we generally find good agreement (plus or minus 2 x 10(exp -4) for N-BK7, less than 1 x 10(exp -4) for the other materials) at room temperature between our measured values and those provided by the vendor, there is some variation between the datasheets provided with the prisms we measured and the catalog values published by the vendor. This underlines the importance of measuring the absolute refractive index of the material when precise knowledge of the refractive index is required.

  17. Negative refractive index in artificial metamaterials.

    Science.gov (United States)

    Grigorenko, A N

    2006-08-15

    We discuss optical constants in artificial metamaterials showing negative magnetic permeability and electric permittivity and suggest a simple formula for the refractive index of a general optical medium. Using the effective-field theory, we calculate the effective permeability and the refractive index of nanofabricated media composed of pairs of identical gold nanopillars with magnetic response in the visible spectrum.

  18. Refractive Index of Black and Green Liquors

    Directory of Open Access Journals (Sweden)

    E. A. Avramenko

    2015-01-01

    Full Text Available Lack of reliable data on the optical properties of black and green liquors complicates control of their composition in technological process of sulphate cellulose production. In this regard the paper presents measurement results of refraction index of black liquors n (k,t at concentration in solutions of bone-dry solids up to k = 70% and at temperatures t = 10-90 °C, as well as in green liquors n(C,t at the total alkalinity of C = 0-250 g/l and in the same temperature range. All samples of solutions of black and green liquors were provided by Segezha Pulp and Paper Mill and certified in factory laboratory. Measurements were taken by means of the laboratory Abbe refractometer (URL-1, digital refractometer "Expert pro", goniometer spectrometer GS-5, and ultra-violet spectrophotometer as well. The work also presents optical D density spectra in the ultra-violet region of the wavelengths for the samples of a green liquor and main mineral component to form it, i.e. Na2S (sodium sulphide. To calculate dispersion of n (λ in the visible spectral range, here a Lorentz single-oscillator model was used. The paper discusses study results of dispersive dependence of refraction index in green liquors with various concentration and chemical components of n (λ, C forming them at t = 20°C. Computing and experimental dependences of n (λ had not only good qualitative, but also quite satisfactory quantitative compliance. The work also describes main mineral components defining optical properties in these liquors. Given here data on concentration and temperature dependences of a refraction index in black n(k,t and green n(C,t liquors have been never published before. These data are of essential interest to control soda recovery technologies in manufacturing sulphate cellulose. The received results can be also used to tune and calibrate modern domestic and foreign industrial refractometers.

  19. Refractive index of TlGaAs

    Energy Technology Data Exchange (ETDEWEB)

    Ohnishi, K.; Shiba, M.; Yamakage, M.; Kajikawa, Y. [Department of Electric and Control Systems Engineering, Interdisciplinary Faculty of Science and Engineering, Shimane University (Japan)

    2008-07-01

    Refractive index has been determined from reflectance measurements at 77-300 K for Tl{sub x}Ga{sub 1-x}As samples with x{<=}0.077 prepared by low-temperature molecular-beam epitaxy. A very high refractive index of around 4.5 at room temperature in the transparent wavelength region has been revealed for Tl{sub x}Ga{sub 1-x}As with x=0.077. The temperature coefficient of the refractive index was found to increase with Tl content. (copyright 2008 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  20. Formation of bulk refractive index structures

    Energy Technology Data Exchange (ETDEWEB)

    Potter, Jr., Barrett George; Potter, Kelly Simmons; Wheeler, David R.; Jamison, Gregory M.

    2003-07-15

    A method of making a stacked three-dimensional refractive index structure in photosensitive materials using photo-patterning where first determined is the wavelength at which a photosensitive material film exhibits a change in refractive index upon exposure to optical radiation, a portion of the surfaces of the photosensitive material film is optically irradiated, the film is marked to produce a registry mark. Multiple films are produced and aligned using the registry marks to form a stacked three-dimensional refractive index structure.

  1. Temperature-Dependent Refractive Index Measurements of Caf2, Suprasil 3001, and S-FTM16 for the Euclid Near Infrared Spectrometer and Photometer

    Science.gov (United States)

    Leviton, Douglas B.; Miller, Kevin H.; Quijada, Manuel A.; Grupp, Frank D.

    2015-01-01

    Using the Cryogenic High Accuracy Refraction Measuring System (CHARMS) at NASA's Goddard Space Flight Center, we measured absolute refractive indices at temperatures from 100 to 310 K at wavelengths from 0.42 to 3.6 microns for CaF2, Suprasil 3001 fused silica, and S-FTM16 glass in support of lens designs for the Near Infrared Spectrometer and Photometer (NISP) for ESA's Euclid dark energy mission. We report absolute refractive index, dispersion (dn/d?), and thermo-optic coefficient (dn/dT) for these materials. In this study, materials from different melts were procured to understand index variability in each material. We provide temperature-dependent Sellmeier coefficients based on our data to allow accurate interpolation of index to other wavelengths and temperatures. For calcium fluoride (CaF2) and S-FTM16, we compare our current measurements with CHARMS measurements of these materials made in the recent past for other programs. We also compare Suprasil 3001's indices to those of other forms of fused silica we have measured in CHARMS.

  2. The refractive index of relic gravitons

    CERN Document Server

    Giovannini, Massimo

    2016-01-01

    The dynamical evolution of the refractive index of the tensor modes of the geometry produces a specific class of power spectra characterized by a blue (i.e. slightly increasing) slope which is directly determined by the competition of the slow-roll parameter and of the rate of variation of the refractive index. Throughout the conventional stages of the inflationary and post-inflationary evolution, the microwave background anisotropies measurements, the pulsar timing limits and the big-bang nucleosythesis constraints set stringent bounds on the refractive index and on its rate of variation. Within the physically allowed region of the parameter space the cosmic background of relic gravitons leads to a potentially large signal for the ground based detectors (in their advanced version) and for the proposed space-borne interferometers. Conversely, the lack of direct detection of the signal will set a qualitatively new bound on the dynamical variation of the refractive index.

  3. Refractive index contrast in porous silicon multilayers

    Energy Technology Data Exchange (ETDEWEB)

    Nava, R.; Mora, M.B. de la; Tagueena-Martinez, J. [Centro de Investigacion en Energia, Universidad Nacional Autonoma de Mexico, Temixco, Morelos (Mexico); Rio, J.A. del [Centro de Investigacion en Energia, Universidad Nacional Autonoma de Mexico, Temixco, Morelos (Mexico); Centro Morelense de Innovacion y Transferencia Tecnologica, Consejo de Ciencia y Tecnologia del Estado de Morelos (Mexico)

    2009-07-15

    Two of the most important properties of a porous silicon multilayer for photonic applications are flat interfaces and a relative large refractive index contrast between layers in the optical wavelength range. In this work, we studied the effect of the current density and HF electrolyte concentration on the refractive index of porous silicon. With the purpose of increasing the refractive index contrast in a multilayer, the refractive index of porous silicon produced at low current was studied in detail. The current density applied to produce the low porosity layers was limited in order to keep the electrolyte flow through the multilayer structure and to avoid deformation of layer interfaces. We found that an electrolyte composed of hydrofluoric acid, ethanol and glycerin in a ratio of 3:7:1 gives a refractive index contrast around 1.3/2.8 at 600 nm. Several multilayer structures with this refractive index contrast were fabricated, such as dielectric Bragg mirrors and microcavities. Reflectance spectra of the structures show the photonic quality of porous silicon multilayers produced under these electrochemical conditions. (copyright 2009 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  4. Temperature dependence of refractive index and of electrical impedance of grape seed (Vitis vinifera, Vitis labrusca) oils extracted by Soxhlet and mechanical pressing

    OpenAIRE

    2015-01-01

    In this report, the temperature dependence of the refractive index and electric impedance of vegetable oil grape seeds extracted from Vitis vinifera (v. Cabernet) and Vitis labrusca (v. Bordo) are investigated by means of experimental techniques. The seeds were collected from wineries located in two cities in the south of Brazil. In both extraction methods, the seeds were dried at 40.0 °C and at 80.0 °C, respectively, before the oil extraction. From optical microscopy and refractometry result...

  5. Index of refraction of molecular nitrogen for sodium matter waves

    CERN Document Server

    Loreau, J; Dalgarno, A

    2013-01-01

    We calculate the index of refraction of sodium matter waves propagating through a gas of nitrogen molecules. We use a recent ab initio potential for the ground state of the NaN_2 Van der Waals complex to perform quantal close-coupling calculations and compute the index of refraction as a function of the projectile velocity. We obtain good agreement with the available experimental data. We show that the refractive index contains glory oscillations, but that they are damped by the averaging over the thermal motion of the N_2 molecules. These oscillations appear at lower temperatures and projectile velocity. We also investigate the behavior of the refractive index at low temperature and low projectile velocity to show its dependence on the rotational state of N_2, and discuss the advantage of using diatomic molecules as projectiles.

  6. Absorption and refractive index dynamics in waveguide semiconductor electroabsorbers

    DEFF Research Database (Denmark)

    Romstad, Francis Pascal

    2002-01-01

    with 9.6 dB of extinction ratio can be realized. Teh sign of the refractive index change, induced by optical generation of carriers in the active region, is seen to depend both on the optical power and on the reverse bias applied to the saturable absorber. The trends of the observed refractive index...... with 10 shallow quantum wells and a component with 5 deep quantum wells shows that the shallow 10 quantum wells component is preferable with respect to chirp, extinction ratio and potentially also the insertion loss. Calculations of the refractive indes change confirms the measurements and show...

  7. Fiber optic liquid refractive index sensor

    Science.gov (United States)

    Bhardwaj, Vanita; Gangwar, Rahul Kumar; Singh, Vinod Kumar

    2015-08-01

    In this present work we report fabrication of fiber optic liquid refractive index (RI) measurement sensor based on Michelson Interferometer method. This sensor was assembled by using graded index multimode (MM) fiber with core diameter 50 µm and the cladding of fiber was removed by simple chemical method. To perform this experiment a 2×2 3dB coupler is used. The fiber ends are then immersed in solvent and solution to provide reference and refractive index measurements, respectively. This method was successfully used to measure refractive index of Sodium Chloride (NaCl)-Water solution at different concentrations. The fringe contrast sensitivity of device is 92.90 dB/RIU measured in the RI range from 1.34 to 1.42 which is better than Mach-Zehnder Interferometer sensor [1] and Fabry perot based sensor [2]. The fabrication of sensor is simple, low cost and highly sensitive.

  8. Investigation on crystalline perfection, optical transmittance, birefringence, temperature-dependent refractive index, laser damage threshold and pyroelectric characteristics of inversely soluble lithium sulfate monohydrate single crystals

    Science.gov (United States)

    Silambarasan, A.; Rajesh, P.; Bhatt, Rajeev; Bhaumik, Indranil; Karnal, A. K.; Ramasamy, P.; Gupta, P. K.

    2016-08-01

    Bulk prismatic lithium sulfate monohydrate (LSMH) single crystals were grown by seed rotation with slow heating method from aqueous solution. Small FWHM obtained from high-resolution X-ray diffraction spectrum shows that the crystals grown by this method have less defects and absence of low-angle grain boundaries. The high transmittance and low reflectance nature of the grown crystal was observed using UV-Vis-NIR spectrometer. The principal refractive indices of a LSMH crystal have been measured by a prism coupling method for the wavelengths of 0.407, 0.532, 0.828, 1.064 and 1.551 µm at room temperature, and Sellmeier equations are determined from the fitting of the data point. The refractive index data confirm that LSMH crystal is negative biaxial and the optic axis lies in YZ plane with an angle (2 V y ) of 51.74° with respect to y axis at 532 nm wavelength. The thermo-optic coefficients were determined from the temperature-dependent refractive indices measured in the range of 30-125 °C for the wavelengths of 532 and 1064 nm. The surface laser damage threshold studies reveal the higher optical radiation stability against 532-nm laser. The pyroelectric coefficients and pyroelectric figure of merit were determined from the pyroelectric current measurement by the Byer and Roundy method.

  9. Cryogenic Refractive Index of Heraeus Homosil Glass

    Science.gov (United States)

    Miller, Kevin H.; Quijada, Manuel A.; Leviton, Douglas B.

    2017-01-01

    This paper reports measurements of the refractive index of Homosil (Heraeus) over the wavelength range of 0.343.16 m and temperature range of 120335 K. These measurements were performed by using the Cryogenic High Accuracy Refraction Measuring System (CHARMS) facility at the NASAs Goddard Space Flight Center. These measurements were in support of an integrated Structural-Thermal-Optical-Performance (STOP) model that was developed for a field-widened Michelson interferometer that is being built and tested for the High Spectral Resolution Lidar (HSRL) project at the NASA Langley Research Center (LaRC). The cryogenic refractive index measurements were required in order to account for the highly sensitivity performance of the HSRL instrument to changes in refractive index with temperature, temperature gradients, thermal expansion, and deformation due to mounting stresses. A dense coverage of the absolute refractive index over the aforementioned wavelength and temperature ranges was used to determine the thermo-optic coefficient (dndT) and dispersion relation (dnd) as a function of wavelength and temperature. Our measurements of Homosil will be compared with measurements of other glasses from the fused silica family studied in CHARMS as well as measurements reported elsewhere in literature.

  10. Finite checkerboards of dissipative negative refractive index.

    Science.gov (United States)

    Chakrabarti, Sangeeta; Ramakrishna, S Anantha; Guenneau, S

    2006-12-25

    The electromagnetic properties of finite checkerboards consisting of alternating rectangular cells of positive refractive index (epsilon= +1, micro= +1) and negative refractive index (epsilon= -1, micro= -1) have been investigated numerically. We show that the numerical calculations have to be carried out with very fine discretization to accurately model the highly singular behaviour of these checkerboards. Our solutions show that, within the accuracy of the numerical calculations, the focusing properties of these checkerboards are reasonably robust in the presence of moderate levels of dissipation. We also show that even small systems of checkerboards can display focussing effects to some extent.

  11. Refractive Index Enhancement in Atomic Media

    Science.gov (United States)

    Proite, Nicholas; Sikes, Daniel; Yavuz, Deniz

    2010-03-01

    We experimentally demonstrate a scheme where a laser beam experiences refractive index enhancement with vanishing absorption. The essential idea is to excite two Raman resonances with appropriately chosen strong laser beams in a far-off resonant atomic system. We have performed our experiments both in vapor cells and in ultracold atomic clouds. Additionally, we discuss a new scheme that achieves giant Kerr nonlinearities using refractive index enhancement. This scheme does not require an intense coupling laser and has the potential to produce all-optical switches and distributed Bragg reflectors at a total energy requirement of tens of photons per atomic cross section.

  12. Studies on Negative Refractive Index without Absorption

    CERN Document Server

    Rajapakse, R M; Yelin, S F

    2012-01-01

    Which systems are ideal to obtain negative refraction with no absorption? Electromagnetically induced transparency (EIT) is a method to suppress absorption and make a material transparent to a field of a given frequency. Such a system has been discussed in [1]; however the main limitations for negative refraction introduced are the necessity of resonant electric and magnetic dipole transitions, and the necessity of very dense media. We suggest using frequency translators in a composite system that would provide negative refraction for a range of optical frequencies while attempting to overcome the limitations discussed above. In the process of using frequency translators, we also find composite systems that can be used for refractive index enhancement.

  13. Nonlinear refractive index of optical crystals

    Science.gov (United States)

    Adair, Robert; Chase, L. L.; Payne, Stephen A.

    1989-02-01

    The nonlinear refractive indices (n2) of a large number of optical crystals have been measured at a wavelength near one micrometer with use of nearly degenerate three-wave mixing. The measurements are compared with the predictions of an empirical formula derived by Boling, Glass, and Owyoung. This formula, which relates n2 to the linear refractive index and its dispersion, is shown to be accurate to within about 30% for materials with nonlinear indices ranging over 3 orders of magnitude. Measurements for a number of binary oxide and fluoride crystals have been analyzed under the assumption that the hyperpolarizability of the anion is much larger than that of the cation. It is found that the hyperpolarizability of oxygen varies by a factor of 10, and that of fluorine varies by a factor of 7, depending on the size of the coordinating cation. This behavior is similar to that of the linear polarizability, although the hyperpolarizability is much more sensitive than the linear polarizability to the identity of the cation. The measured halide ion hyperpolarizabilities for several alkali-halide crystals are in reasonable agreement with recent self-consistent calculations. A semiempirical model was proposed by Wilson and Curtis to account for the dependence of the linear anionic polarizability on the radius of the cation. This model also accounts quite well for the variation of the hyperpolarizability of both fluorine and oxygen, except for cation partners that have filled or unfilled d-electron shells. The nonlinear indices of a number of complex oxides (i.e., those with more than one cation) have been calculated from the partial hyperpolarizabilities deduced from the data for the binary oxides. The calculated and measured values of n2 agree to within an average error of 13%.

  14. Variable refractive index in environment matte

    Institute of Scientific and Technical Information of China (English)

    ZHAO Ming-tian; XIAO Shuang-jiu; YANG Xu-bo; MA Li-zhuang

    2006-01-01

    Environment matting and compositing is a technique to extract a foreground object, including color, opacity, reflective and refractive properties, from a real-world scene, and synthesize new images by placing it into new environments. The description of the captured object is named environment matte. Recent matting and compositing techniques can produce quite realistic images for objects with complex optical properties. This paper presents an approximate method to transform the matte by simulating variation of the foreground object's refractive index. Our algorithms can deal with achromatous-and-transparent objects and the experimental results are visually acceptable. Our idea and method can be applied to produce some special video effects, which could be very useful in film making, compared with the extreme difficulty of physically changing an object's refractive index.

  15. Negative Refractive Index in Optics of Metal-Dielectric Composites

    OpenAIRE

    Kildishev, A.V.; Cai, W; Chettiar, U K; Yuan, H.-K.; Sarychev, A. K.; Drachev, V. P.; Shalaev, V. M.

    2005-01-01

    Specially designed metal-dielectric composites can have a negative refractive index in the optical range. Specifically, it is shown that arrays of single and paired nanorods can provide such negative refraction. For pairs of metal rods, a negative refractive index has been observed at 1.5 micrometer. The inverted structure of paired voids in metal films may also exhibit a negative refractive index. A similar effect can be accomplished with metal strips in which the refractive index can reach ...

  16. Refractive index of the fly rhabdomere

    NARCIS (Netherlands)

    Beersma, D.G.M.; Hoenders, B.J.; Huiser, A.M.J.; Toorn, P. van

    1982-01-01

    The refractive index and the diameter of the fly rhabdomere were determined by comparing the experimental results derived from interference microscopy with the results of a theoretical study on the scattering of plane waves by a homogeneous, isotropic cylindrical dielectric rod. It was found that

  17. Characterising refractive index dispersion in chalcogenide glasses

    DEFF Research Database (Denmark)

    Fang, Y.; Sojka, L.; Jayasuriya, D.

    2016-01-01

    Much effort has been devoted to the study of glasses that contain the chalcogen elements (sulfur, selenium and tellurium) for photonics' applications out to MIR wavelengths. In this paper we describe some techniques for determining the refractive index dispersion characteristics of these glasses....... Knowledge of material dispersion is critical in delivering step-index fibres including with high numerical aperture for mid-infrared supercontinuum generation....

  18. Enlargement of zero averaged refractive index gaps in the photonic heterostructures containing negative-index materials.

    Science.gov (United States)

    Xiang, Yuanjiang; Dai, Xiaoyu; Wen, Shuangchun; Fan, Dianyuan

    2007-11-01

    We show that the frequency range of the zero averaged refractive index gap in a photonic heterostructure containing negative-index materials can be enlarged owing to the property that its lower and upper frequency edges depend on the thickness ratio of the positive- and negative-index materials. Compared to the zero averaged refractive index gap of a single photonic crystal, the frequency range of the zero averaged refractive index gaps in a photonic heterostructure can be notably enlarged. Moreover, it is shown that the band edge of the zero averaged refractive index gap is determined not only by the TM polarization but also by the TE polarization, which is obviously different from the omnidirectional band gaps in conventional photonic crystals, whose bandwidth is determined by the TM polarization.

  19. Negative refraction and Negative refractive index in an optical uniaxial absorbent medium

    OpenAIRE

    Jen, Yi-Jun; Yu, Ching-Wei; Lin, Chin-Te

    2009-01-01

    This work demonstrates the existence of both negative refraction and a negative refractive index in an optical uniaxial absorbent medium that can be characterized by ordinary and extraordinary refractive indices. Negative refraction occurs in any absorbent uniaxial medium if the real part of the extraordinary index is less than its imaginary part. The refractive index is negative when the incident medium is sufficiently dense and the incident angle exceeds a critical angle that is defined here.

  20. Refractive index spectral dependence, Raman and transmission spectra of high-purity $^{28}$Si, $^{29}$Si, $^{30}$Si, and $^{nat}$Si single crystals

    CERN Document Server

    Plotnichenko, V G; Kryukova, E B; Koltashev, V V; Sokolov, V O; Dianov, E M; Gusev, A V; Gavva, V A; Kotereva, T V; Churbanov, M F

    2011-01-01

    Precise measurement of the refractive index of stable silicon isotopes $^{28}$Si, $^{29}$Si, $^{30}$Si single crystals with enrichments above 99.9 at.% and a silicon single crystal $^{nat}$Si of natural isotopic composition is performed with the Fourier-transform interference refractometry method from 1.06 to more than 80 mkm with 0.1 cm$^{-1}$ resolution and accuracy of $2 \\times 10^{-5} ... 1 \\times 10^{-4}$. The oxygen and carbon concentrations in all crystals are within $5 \\times 10^{15}$ cm$^{-3}$ and the content of metal impurities is $10^{-5} ... 10^{-6}$ at.%. The peculiar changes of the refractive index in the phonon absorption region of all silicon single crystals are shown. The coefficients of generalized Cauchy dispersion function approximating the experimental refractive index values all over the measuring range are given. The transmission and Raman spectra are also studied.

  1. Waveguide Modes and Refractive Index in Photoreceptors of Invertebrates

    NARCIS (Netherlands)

    Stavenga, D.G.

    1975-01-01

    The refractive index of visual photoreceptors, if estimated by utilizing waveguide propagation, has to be corrected by a factor depending on the occurring mode. The correction factor is presented graphically for a number of relevant modes. Applied to the honeybee rhabdoms, it is shown that the

  2. Analytical properties of the effective refractive index

    Science.gov (United States)

    Puzko, R. S.; Merzlikin, A. M.

    2017-01-01

    The propagation of a plane wave through a periodic layered system is considered in terms of the effective parameters. The problem of introduction of effective parameters is discussed. It was demonstrated that although the effective admittance cannot be introduced, it is possible to introduce the effective refractive index, which tends toward the Rytov value when the system size increases. It was shown that the effective wave vector derivative is an analytical function of frequency. In particular, the Kramers-Kronig-like relations for real and imaginary parts of the effective wave vector derivative were obtained. The Kramers-Kronig-like relations for the effective refractive index were also considered. The results obtained numerically were proved by exact solution of Maxwell's equations in the specific case of an "equi-impedance" system.

  3. Effective spectral dispersion of refractive index modulation

    Science.gov (United States)

    Vojtíšek, Petr; Květoň, Milan; Richter, Ivan

    2017-04-01

    For diffraction effects inside photopolymer materials, which act as volume diffraction systems (e.g. gratings), refractive index modulation is one of the key parameters. Due to its importance it is necessary to study this parameter from many perspectives, one of which is its value for different spectral components, i.e. its spectral dispersion. In this paper, we discuss this property and present an approach to experimental and numerical extraction and analysis (via rigorous coupled wave analysis and Cauchy’s empirical relation) of the effective dispersion of refractive index modulation based on an analysis of transmittance maps measured in an angular-spectral plane. It is indicated that the inclusion of dispersion leads to a significantly better description of the real grating behavior (which is often necessary in various design implementations of diffraction gratings) and that this estimation can be carried out for all the diffraction orders present.

  4. A new class of negative refractive index transmission line

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    We propose a new class of negative refractive index transmission line in which ideal operational amplifiers are applied to form the periodically loaded negative-impedance-converted inductors and capacitors. The phase response of the new transmission line is opposite to that of a positive refractive index conventional transmission line. Unlike the existing negative refractive index transmission line, the new negative refractive index transmission line is non-dispersive and thus can lead to many novel applications such as designing new broadband devices.

  5. Measurement of refractive index of single microparticles

    CERN Document Server

    Knoener, G; Nieminen, T A; Heckenberg, N R; Rubinsztein-Dunlop, H; Knoener, Gregor; Parkin, Simon; Nieminen, Timo A.; Heckenberg, Norman R.; Rubinsztein-Dunlop, Halina

    2006-01-01

    The refractive index of single microparticles is derived from precise measurement and rigorous modeling of the stiffness of a laser trap. We demonstrate the method for particles of four different materials with diameters from 1.6 to 5.2 microns and achieve an accuracy of better than 1%. The method greatly contributes as a new characterization technique because it works best under conditions (small particle size, polydispersion) where other methods, such as absorption spectroscopy, start to fail. Particles need not be transferred to a particular fluid, which prevents particle degradation or alteration common in index matching techniques. Our results also show that advanced modeling of laser traps accurately reproduces experimental reality.

  6. Telescope resolution using negative refractive index materials

    Science.gov (United States)

    May, Jack L.; Jennetti, Tony

    2004-02-01

    Concepts are presented for using negative refractive index (NRI) materials to design parabolic reflector telescopes and antennas with resolutions significantly better than the diffractions limit. The main question we are attempting to answer is can negative refractive material be used to improve performance of parabolic systems even when the signal or light source is far away and no evanescent fields are present when they arrive at the parabolic reflector. The main approach is to take advantage of any knowledge that we have to recreate the evanescent fields. Fields are then adapted to improve a performance measure such a sharper focus or antenna rejection of interference. A negative refraction index lens is placed between the conventional reflector and focal plane to shape the point spread function. To produce telescope resolutions that are better than the diffraction limit, evanescent fields created by the reflection off of the parabolic surface are amplified and modified to generate fields that sharpen the focus. A second approach use available knowledge of an emitting aperture to synthesize a field at a distance that matches as closely as possible the field of the emitting aperture. The yet unproven conclusion is that techniques can be developed that will improve antenna and telescopes resolution that is better than the diffraction limit.

  7. Optical glass: refractive index change with wavelength and temperature

    Science.gov (United States)

    Englert, Marion; Hartmann, Peter; Reichel, Steffen

    2014-05-01

    With the catalog of 1992 SCHOTT introduced two formulae each with six parameters for a better representation of the refractive index of optical glasses. The Sellmeier-equation improved the characterization of dispersion at room temperature and the Hoffmann equation that of its temperature dependence. Better representation had been expected because both formulae were derived from general dispersion theory. The original publication of Hoffmann et al. from 1992 contains first results on the accuracy of the fits. The extended use of the formulae has led to a collection of data allowing reviewing the adequacy of the Sellmeier-equation approach on a much broader basis. We compare fitted refractive index values with measured values for all wavelengths used at our precision refractive index goniometer. Data sets are available for specific melts of the four representative glass types N-BK7, N-FK5, LF5 and IRG2. For some materials, the optical glass N-LAF21, the IR glass IRG2 and the crystal CaF2, several sets of data for the temperature dependence of the refractive index are available thus giving evidence for the variation of these properties among melts of the same material.

  8. Temperature dependence of refractive index and of electrical impedance of grape seed (Vitis vinifera, Vitis labrusca oils extracted by Soxhlet and mechanical pressing

    Directory of Open Access Journals (Sweden)

    Vieira, D. S.

    2015-09-01

    Full Text Available In this report, the temperature dependence of the refractive index and electric impedance of vegetable oil grape seeds extracted from Vitis vinifera (v. Cabernet and Vitis labrusca (v. Bordo are investigated by means of experimental techniques. The seeds were collected from wineries located in two cities in the south of Brazil. In both extraction methods, the seeds were dried at 40.0 °C and at 80.0 °C, respectively, before the oil extraction. From optical microscopy and refractometry results, one can see that the grape seed oil extracted by mechanical pressing shows a linear dependence between the refractive index and temperature and has no birefringent residues. From the fitting of the EIS (Electrical Impedance Spectroscopy data, an equivalent electric circuit composed of a parallel RC in series with a resistor is proposed. The circuit model is in good agreement with the experimental data and provides the electrical permittivity of the vegetable oils investigated.Se investiga mediante técnicas experimentales la dependencia del índice de refracción y la impedancia eléctrica de aceites vegetales extraídos de semillas de uva Vitis vinifera (v. Cabernet y Vitis labrusca (v. Bordo. Las semillas fueron recolectadas de bodegas situadas en dos ciudades al sur de Brasil. Antes de la extracción del aceite, mediante dos métodos de extracción, las semillas fueron secadas a 40,0 °C y 80,0 °C. De los resultados de refractometria y microscopía óptica, se comprueba que el aceite de semilla de uva extraída por prensado mecánico obedece a una relación lineal del índice de refracción con la temperatura y no presentan resíduos birrefringentes. Con los datos de impedancia eléctrica, se propone un circuito eléctrico equivalente formado por una resistencia y un condensador en paralelo, a su vez ligado a otra resistencia en serie. El modelo de circuito tiene una alta correlación con los datos experimentales y permite obtener la constante diel

  9. Microwave gain medium with negative refractive index.

    Science.gov (United States)

    Ye, Dexin; Chang, Kihun; Ran, Lixin; Xin, Hao

    2014-12-19

    Artificial effective media are attractive because of the fantastic applications they may enable, such as super lensing and electromagnetic invisibility. However, the inevitable loss due to their strongly dispersive nature is one of the fundamental challenges preventing such applications from becoming a reality. In this study, we demonstrate an effective gain medium based on negative resistance, to overcompensate the loss of a conventional passive metamaterial, meanwhile keeping its original negative-index property. Energy conservation-based theory, full-wave simulation and experimental measurement show that a fabricated sample consisting of conventional sub-wavelength building blocks with embedded microwave tunnel diodes exhibits a band-limited Lorentzian dispersion simultaneously with a negative refractive index and a net gain. Our work provides experimental evidence to the assertion that a stable net gain in negative-index gain medium is achievable, proposing a potential solution for the critical challenge current metamateiral technology faces in practical applications.

  10. Microwave gain medium with negative refractive index

    Science.gov (United States)

    Ye, Dexin; Chang, Kihun; Ran, Lixin; Xin, Hao

    2014-12-01

    Artificial effective media are attractive because of the fantastic applications they may enable, such as super lensing and electromagnetic invisibility. However, the inevitable loss due to their strongly dispersive nature is one of the fundamental challenges preventing such applications from becoming a reality. In this study, we demonstrate an effective gain medium based on negative resistance, to overcompensate the loss of a conventional passive metamaterial, meanwhile keeping its original negative-index property. Energy conservation-based theory, full-wave simulation and experimental measurement show that a fabricated sample consisting of conventional sub-wavelength building blocks with embedded microwave tunnel diodes exhibits a band-limited Lorentzian dispersion simultaneously with a negative refractive index and a net gain. Our work provides experimental evidence to the assertion that a stable net gain in negative-index gain medium is achievable, proposing a potential solution for the critical challenge current metamateiral technology faces in practical applications.

  11. Near-zero refractive index photonics

    Science.gov (United States)

    Liberal, Iñigo; Engheta, Nader

    2017-03-01

    Structures with near-zero parameters (for example, media with near-zero relative permittivity and/or relative permeability, and thus a near-zero refractive index) exhibit a number of unique features, such as the decoupling of spatial and temporal field variations, which enable the exploration of qualitatively different wave dynamics. This Review summarizes the underlying principles and salient features, physical realizations and technological potential of these structures. In doing so, we revisit their distinctive impact on multiple optical processes, including scattering, guiding, trapping and emission of light. Their role in emphasizing secondary responses of matter such as nonlinear, non-reciprocal and non-local effects is also discussed.

  12. Optical glass with tightest refractive index and dispersion tolerances for high-end optical designs

    Science.gov (United States)

    Jedamzik, R.; Reichel, S.; Hartmann, P.

    2014-03-01

    In high end optical designs the quality of the optical system not only depends on the chosen optical glasses but also on the available refractive index and Abbe number tolerances. The primary optical design is based on datasheet values of the refractive index and Abbe number. In general the optical position of the delivered glass will deviate from the catalog values by given tolerances due to production tolerances. Therefore in many cases the final optical design needs to be modified based on real glass data. Tighter refractive index and Abbe number tolerances can greatly reduce this additional amount of work. The refractive index and Abbe number of an optical glass is a function of the chemical composition and the annealing process. Tight refractive index tolerances require not only a close control and high reliability of the melting and fine annealing process but also best possible material data. These data rely on high accuracy measurement and accurate control during mass production. Modern melting and annealing procedure do not only enable tight index tolerances but also a high homogeneity of the optical properties. Recently SCHOTT was able to introduce the tightest available refractive index and Abbe number tolerance available in the market: step 0.5 meaning a refractive index tolerance of +/- 0.0001 and an Abbe number tolerance of +/- 0.1%. This presentation describes how the refractive index depends on the glass composition and annealing process and describes the requirements to get to this tightest refractive index and Abbe number tolerance.

  13. Negative refractive index in coaxial plasmon waveguides.

    Science.gov (United States)

    de Waele, René; Burgos, Stanley P; Atwater, Harry A; Polman, Albert

    2010-06-07

    We theoretically show that coaxial waveguides composed of a metallic core, surrounded by a dielectric cylinder and clad by a metal outer layer exhibit negative refractive index modes over a broad spectral range in the visible. For narrow dielectric gaps (10 nm GaP embedded in Ag) a figure-of-merit of 18 can be achieved at lambda(0) = 460 nm. For larger dielectric gaps the negative index spectral range extends well below the surface plasmon resonance frequency. By fine-tuning the coaxial geometry the special case of n = -1 at a figure-of-merit of 5, or n = 0 for a decay length of 500 nm can be achieved.

  14. Refractive index of liquid mixtures: theory and experiment.

    Science.gov (United States)

    Reis, João Carlos R; Lampreia, Isabel M S; Santos, Angela F S; Moita, Maria Luísa C J; Douhéret, Gérard

    2010-12-03

    An innovative approach is presented to interpret the refractive index of binary liquid mixtures. The concept of refractive index "before mixing" is introduced and shown to be given by the volume-fraction mixing rule of the pure-component refractive indices (Arago-Biot formula). The refractive index of thermodynamically ideal liquid mixtures is demonstrated to be given by the volume-fraction mixing rule of the pure-component squared refractive indices (Newton formula). This theoretical formulation entails a positive change of refractive index upon ideal mixing, which is interpreted in terms of dissimilar London dispersion forces centred in the dissimilar molecules making up the mixture. For real liquid mixtures, the refractive index of mixing and the excess refractive index are introduced in a thermodynamic manner. Examples of mixtures are cited for which excess refractive indices and excess molar volumes show all of the four possible sign combinations, a fact that jeopardises the finding of a general equation linking these two excess properties. Refractive indices of 69 mixtures of water with the amphiphile (R,S)-1-propoxypropan-2-ol are reported at five temperatures in the range 283-303 K. The ideal and real refractive properties of this binary system are discussed. Pear-shaped plots of excess refractive indices against excess molar volumes show that extreme positive values of excess refractive index occur at a substantially lower mole fraction of the amphiphile than extreme negative values of excess molar volume. Analysis of these plots provides insights into the mixing schemes that occur in different composition segments. A nearly linear variation is found when Balankina's ratios between excess and ideal values of refractive indices are plotted against ratios between excess and ideal values of molar volumes. It is concluded that, when coupled with volumetric properties, the new thermodynamic functions defined for the analysis of refractive indices of liquid

  15. Refractive index and dispersion of butterfly chitin and bird keratin measured by polarizing interference microscopy

    NARCIS (Netherlands)

    Leertouwer, Hein L.; Wilts, Bodo D.; Stavenga, Doekele G.

    2011-01-01

    Using Jamin-Lebedeff interference microscopy, we measured the wavelength dependence of the refractive index of butterfly wing scales and bird feathers. The refractive index values of the glass scales of the butterfly Graphium sarpedon are, at wavelengths 400, 500 and 600 nm, 1.572, 1.552 and 1.541,

  16. Fiber in-line Michelson Interferometer for refractive index sensing

    Science.gov (United States)

    Liao, C. R.; Wang, D. N.; Wang, Min; Yang, Minghong; Wang, Yiping

    2013-09-01

    A fiber in-line Michelson interferometer based on open micro-cavity is demonstrated, which is fabricated by femtosecond laser micromachining and thin film coating technique. In refractive index sensing, this interferometer operates in a reflection mode of detection, exhibits compact sensor head, good mechanical reliability, wide operation range and high sensitivity of 975nm/RIU (refractive index unit) at the refractive index value of 1.484.

  17. Calculation of electron wave functions and refractive index of Ne

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The radial wave functions of inner electron shell and outer electron shell of a Ne atom were obtained by the approximate analytical method and tested by calculating the ground state energy of the Ne atom. The equivalent volume of electron cloud and the refractive index of Ne were calculated. The calculated refractive index agrees well with the experimental result. Relationship between the refractive index and the wave function of Ne was discovered.

  18. Characterization of refractive index distribution of polymer optical fiber

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    A focusing method is developed to characterize the refractive index profile of polymer optical fiber (POF). Based on the refractive index profile the theoretical bandwidth and the core index exponentα (α > 0) of POF are calculated. The results show that the value of theoretical bandwidth agrees well with the experimental data.

  19. Ultrasensitive twin-core photonic bandgap fiber refractive index sensor

    DEFF Research Database (Denmark)

    Yuan, Scott Wu; Town, Graham; Bang, Ole

    2009-01-01

    We propose a microfluidic refractive index sensor based on new polymer twin-core photonic bandgap fiber (PBGF). The sensor can achieve ultrahigh detection limit, i.e. >1.4times10-7RIU refractive index unit (RIU), by measuring the coupling wavelength shift.......We propose a microfluidic refractive index sensor based on new polymer twin-core photonic bandgap fiber (PBGF). The sensor can achieve ultrahigh detection limit, i.e. >1.4times10-7RIU refractive index unit (RIU), by measuring the coupling wavelength shift....

  20. Experimental Determination of Refractive Index of Gas Hydrates

    DEFF Research Database (Denmark)

    Bylov, Martin; Rasmussen, Peter

    1997-01-01

    The refractive indexes of methane hydrate and natural gas hydrate have been experimentally determined. The refractive indexes were determined in an indirect manner making use of the fact that two non-absorbing materials will have the same refractive index if they cannot be distinguished visually....... For methane hydrate (structure I) the refractive index was found to be 1.346 and for natural gas hydrate (structure II) it was found to be 1.350. The measurements further suggest that the gas hydrate growth rate increases if the water has formed hydrates before. The induction time, on the other hand, seems...

  1. Empirical formula for the refractive index of freezing brine

    DEFF Research Database (Denmark)

    Frisvad, Jeppe Revall

    2009-01-01

    The refractive index of freezing brine is important for example in order to estimate oceanic scattering as sea ice develops. Previously, no simple continuous expression was available for estimating the refractive index of brine at subzero temperatures. I show that extrapolation of the empirical...... formula for the refractive index of seawater by Quan and Fry [Appl. Opt. 34(18), 3477-3480 (1995)] provides a good fit to the refractive index of freezing brine for temperatures above -24 degrees celsius and salinities below 180 parts per thousand....

  2. Atmospheric stability index using radio occultation refractivity profiles

    Indian Academy of Sciences (India)

    D Jagadheesha; B Manikiam; Neerja Sharma; P K Pal

    2011-04-01

    A new stability index based on atmospheric refractivity at ∼500 hPa level and surface measurements of temperature, pressure and humidity is formulated. The new index named here as refractivity based lifted index (RLI) is designed to give similar results as traditionally used lifted index derived from radiosonde profiles of temperature, pressure and humidity. The formulation of the stability index and its comparison with the traditional temperature profile based lifted index (LI) is discussed. The index is tested on COSMIC radio occultation derived refractivity profiles over Indian region. The forecast potential of the new index for rainfall on 2° × 2° latitude–longitude spatial scale with lead time of 3–24 hours indicate that the refractivity based lifted index works better than the traditional temperature based lifted index for the Indian monsoon region. Decreasing values of RLI tend to give increasing rainfall probabilities.

  3. Study on measurement of refractive index profile of GI-POF by light scattering

    Science.gov (United States)

    Huifen, Jiang; Xiang'e, Han

    2009-04-01

    This paper is devoted to the study on measurement of refractive index profile of graded-index polymer optical fiber (GI-POF) by light scattering. Using Generalized Airy theory and Debye series of an inhomogeneous cylinder, the scattering intensity distributions are obtained of Airy structure of rainbows for different refractive index profile. The results show that positions of Airy peaks depend closely on refractive index profile of GI-POF. Since each order of rainbow penetrates it to different depths, such methods could be used to provide information of the refractive index profile of GI-POF. For GI-POF with given diameter, positions of Airy peaks of rainbows are simulated as a function of refractive index profile, which can be used to inverse unknown parameters of refractive index profile. The least square method is used in inversion of refractive index profile with the given refractive index of the cladding. The results obtained agree with theoretical values with high precision. The method has the advantages of non-instructive and on-line measurement, and can be used for the measurement of other inhomogeneous droplets.

  4. Why is the refractive index cannot be negative

    CERN Document Server

    Davidovich, Michael V

    2014-01-01

    It has been shown that for left-handed metamaterials and generally for negative refraction media the refraction index cannot be entered unequivocally and cannot be considered as real, and especially as negative. This index for above referred media is not expedient

  5. Comment on "Negative refractive index in artificial metamaterials".

    Science.gov (United States)

    Kildishev, Alexander V; Drachev, Vladimir P; Chettiar, Uday K; Shalaev, Vladimir M; Werner, Douglas H; Kwon, Do-Hoon

    2007-06-01

    We dispute Grigorenko's statement [Opt. Lett. 31, 2483 (2006)] that measuring only the reflection intensity spectrum is sufficient for determining the effective refractive index. In addition, our simulations do not confirm his conclusions regarding the negative refractive index and the negative permeability of the nanopillar sample in the visible range.

  6. Measurement of Refractive Index Using a Michelson Interferometer.

    Science.gov (United States)

    Fendley, J. J.

    1982-01-01

    Describes a novel and simple method of measuring the refractive index of transparent plates using a Michelson interferometer. Since it is necessary to use a computer program when determining the refractive index, undergraduates could be given the opportunity of writing their own programs. (Author/JN)

  7. A terahertz metamaterial with unnaturally high refractive index.

    Science.gov (United States)

    Choi, Muhan; Lee, Seung Hoon; Kim, Yushin; Kang, Seung Beom; Shin, Jonghwa; Kwak, Min Hwan; Kang, Kwang-Young; Lee, Yong-Hee; Park, Namkyoo; Min, Bumki

    2011-02-17

    Controlling the electromagnetic properties of materials, going beyond the limit that is attainable with naturally existing substances, has become a reality with the advent of metamaterials. The range of various structured artificial 'atoms' has promised a vast variety of otherwise unexpected physical phenomena, among which the experimental realization of a negative refractive index has been one of the main foci thus far. Expanding the refractive index into a high positive regime will complete the spectrum of achievable refractive index and provide more design flexibility for transformation optics. Naturally existing transparent materials possess small positive indices of refraction, except for a few semiconductors and insulators, such as lead sulphide or strontium titanate, that exhibit a rather high peak refractive index at mid- and far-infrared frequencies. Previous approaches using metamaterials were not successful in realizing broadband high refractive indices. A broadband high-refractive-index metamaterial structure was theoretically investigated only recently, but the proposed structure does not lend itself to easy implementation. Here we demonstrate that a broadband, extremely high index of refraction can be realized from large-area, free-standing, flexible terahertz metamaterials composed of strongly coupled unit cells. By drastically increasing the effective permittivity through strong capacitive coupling and decreasing the diamagnetic response with a thin metallic structure in the unit cell, a peak refractive index of 38.6 along with a low-frequency quasi-static value of over 20 were experimentally realized for a single-layer terahertz metamaterial, while maintaining low losses. As a natural extension of these single-layer metamaterials, we fabricated quasi-three-dimensional high-refractive-index metamaterials, and obtained a maximum bulk refractive index of 33.2 along with a value of around 8 at the quasi-static limit.

  8. Negative Refractive Index Metasurfaces for Enhanced Biosensing

    Directory of Open Access Journals (Sweden)

    Dragan Tanasković

    2010-12-01

    Full Text Available In this paper we review some metasurfaces with negative values of effective refractive index, as scaffolds for a new generation of surface plasmon polariton-based biological or chemical sensors. The electromagnetic properties of a metasurface may be tuned by its full immersion into analyte, or by the adsorption of a thin layer on it, both of which change its properties as a plasmonic guide. We consider various simple forms of plasmonic crystals suitable for this purpose. We start with the basic case of a freestanding, electromagnetically symmetrical plasmonic slab and analyze different ultrathin, multilayer structures, to finally consider some two-dimensional “wallpaper” geometries like split ring resonator arrays and fishnet structures. A part of the text is dedicated to the possibility of multifunctionalization where a metasurface structure is simultaneously utilized both for sensing and for selectivity enhancement. Finally we give an overview of surface-bound intrinsic electromagnetic noise phenomena that limits the ultimate performance of a metasurfaces sensor.

  9. Refractive index of silicon at γ ray energies.

    Science.gov (United States)

    Habs, D; Günther, M M; Jentschel, M; Urban, W

    2012-05-04

    For x rays the real part of the refractive index, dominated by Rayleigh scattering, is negative and converges to zero for higher energies. For γ rays a positive component, related to Delbrück scattering, increases with energy and becomes dominating. The deflection of a monochromatic γ beam due to refraction was measured by placing a Si wedge into a flat double crystal spectrometer. Data were obtained in an energy range from 0.18 MeV to 2 MeV. The data are compared to theory, taking into account elastic and inelastic Delbrück scattering as well as recent results on the energy dependence of the pair creation cross section. Probably a new field of γ optics with many new applications opens up.

  10. Precise determination of the refractive index of suspended particles: light transmission as a function of refractive index mismatch

    Science.gov (United States)

    McClymer, J. P.

    2016-08-01

    Many fluids appear white because refractive index differences lead to multiple scattering. In this paper, we use safe, low-cost commercial index matching fluids to quantitatively study light transmission as a function of index mismatch, reduce multiple scattering to allow single scattering probes, and to precisely determine the index of refraction of suspended material. The transmission profile is compared with Rayleigh-Gans and Mie theory predictions. The procedure is accessible as a student laboratory project, while providing advantages over other standard methods of measuring the refractive index of an unknown nanoparticle, making it valuable to researchers.

  11. Effect of magnetic field of light on refractive index

    Institute of Scientific and Technical Information of China (English)

    Zhang Tao

    2004-01-01

    Light refraction in a medium results from energy exchange between the medium and the magnetic field of the light. Formulas of refractive index, that is, the ratio of light speed in vacuum to light speed in the medium, were derived with the inductor model of electron cloud and the law of energy conservation. Refractive indices of several media were calculated using the formulas derived, and the calculated results are in agreement with the results measured. The anisotropy and the nonlinearity of the refractive index are explained with the theory described in this work.

  12. The iterative self-consistent reaction-field method: The refractive index of pure water

    DEFF Research Database (Denmark)

    Sylvester-Hvid, Kristian O.; Mikkelsen, K. V.; Ratner, M.A.

    2011-01-01

    We present different microscopic models for describing electromagnetic properties of condensed phases and the models involve iterative self-consistent procedures for calculating the properties. We report calculations of the frequency-dependent refractive index of pure water. We investigate...

  13. Refractive index of nanoscale thickness films measured by Brewster refractometry

    CERN Document Server

    Tikhonov, E A; Malyukin, Yu V

    2015-01-01

    It is shown that reflective laser refractometery at Brewster angle can be usefull for precision measurements of refractive indexes (RI) in the transparency band of various films of nanoscale thickness. The RI measurements of nanoscale porous film on the basis of gadolinium orthosilicate and quartz have been carried out as first experience. It is shown that surface light scattering in such films that is connected with clustering of nanoscale pores can decrease the accuracy of the RI measurements at Brewster angle. Estimated physical dependence RI stipulated by the film thickness reduction (3D-2D transition) in the range of (20-160)nm has not been not detected.

  14. Multistep ion exchange processes of gradient refractive index rod lens.

    Science.gov (United States)

    Lv, Hao; Liu, Aimei; Tong, Jufang; Yi, Xunong; Li, Qianguang; Wang, Xinmin; Ding, Yaoming

    2011-01-01

    A mathematical model for research on the refractive index profile (RIP) of multistep ion exchange processes (IEPs) of gradient refractive index rod lenses (GRINs) is established by the different initial condition and boundary condition, based on the Fickian diffusion equation. GRIN rod lenses have been fabricated using the three-step IEPs. Research results indicate that the experimental deviations of refractive index (DRI) are in good agreement with the theoretical data. The DRI of three-step IEPs is superior to the one- and two-step IEPs and smaller than 10(-5).

  15. Analyzing refractive index changes and differential bending in microcantilever arrays

    Science.gov (United States)

    Huber, François; Lang, Hans Peter; Hegner, Martin; Despont, Michel; Drechsler, Ute; Gerber, Christoph

    2008-08-01

    A new microcantilever array design is investigated comprising eight flexible microcantilevers introducing two solid bars, enabling to subtract contributions from differences in refractive index in an optical laser read out system. Changes in the refractive index do not contribute undesirably to bending signals at picomolar to micromolar DNA or protein concentrations. However, measurements of samples with high salt concentrations or serum are affected, requiring corrections for refractive index artifacts. Moreover, to obtain a deeper understanding of molecular stress formation, the differential curvature of cantilevers is analyzed by positioning the laser spots along the surface of the levers during pH experiments.

  16. Laser beam refraction traversely through a graded-index preform to determine refractive index ratio and gradient profile.

    Science.gov (United States)

    Watkins, L S

    1979-07-01

    A technique is described which permits the determination of geometric and refractive index characteristics of graded-index preforms from measurements of the refraction of rays traced through the preform perpendicular to the preform axis. A computer program was developed to trace rays through graded-index preforms to display the refracting effect of the index properties and relate the ray incidence angle to its deflection in traversing the preform. An experimental apparatus has been developed in which a narrow beam of laser radiation is directed at the preform and its deflection angle measured. Comparison between the experimental results and the ray trace calculations using an interative curve-fitting procedure gave nondestructive determinations of the refractive index ratio Delta and index gradient profile parameter alpha as well as measurement of the core dimensions.

  17. Determining the Thickness and Refractive Index of a Mirror

    Science.gov (United States)

    Uysal, Ahmet

    2010-01-01

    When a laser beam reflects from a back surface glass mirror and falls on a screen, a pattern of discrete bright spots is created by partial reflection and refraction of the light at the air-glass interface and reflection at the mirror surface (Fig. 1). This paper explains how this phenomenon can be used to determine the refractive index and the…

  18. THz-induced ultrafast modulation of NIR refractive index of silicon

    DEFF Research Database (Denmark)

    Tarekegne, Abebe Tilahun; Hirori, Hideki; Iwaszczuk, Krzysztof

    2016-01-01

    We measure THz-induced change in refractive index of ∼5×10−3 in high resistivity silicon at 800 nm which indicates generation of high density of free carriers. The change in refractive index increases by more than 30 times with high initial carrier density set by optical excitation compared...... to optically unexcited sample showing strong dependence of carrier generation on initial carrier density. The high change in refractive index of silicon shows that THz excitation has a potential to be an alternative mechanism for optical modulation based on carrier induced dispersion for future ultrafast...

  19. On the performance quantification of resonant refractive index sensors

    National Research Council Canada - National Science Library

    Ian M. White; Xudong Fan

    2008-01-01

    Refractive index (RI) sensors based on optical resonance techniques are receiving a high degree of attention because of the need to develop simple, low-cost, high-throughput detection technologies for a number of applications...

  20. Resolving controversy of unusually high refractive index of a tubulin

    Science.gov (United States)

    Krivosudský, O.; Dráber, P.; Cifra, M.

    2017-02-01

    The refractive index of a tubulin is an important parameter underlying fundamental electromagnetic and biophysical properties of microtubules – protein fibers essential for several cell functions including cell division. Yet, the only experimental data available in the current literature show values of the tubulin refractive index (n=2.36\\text{--}2.90) which are much higher than what the established theories predict based on the weighted contribution of the polarizability of individual amino acids constituting the protein. To resolve this controversy, we report here modeling and rigorous experimental analysis of the refractive index of a purified tubulin dimer. Our experimental data revealed that the refractive index of the tubulin is n=1.64 at wavelength 589 nm and 25 °C, that is much closer to the values predicted by the established theories than what the earlier experimental data provide.

  1. Refractive Index Measurement of Fibers Through Fizeau Interferometry

    Science.gov (United States)

    2013-08-01

    15. SUBJECT TERMS composite, transparent, refractive index, refractometry , interferometer 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF...transparent fibers has long presented a significant challenge. Abbe refractometry , the typical measurement technique for bulk materials and liquids

  2. Refractive index of air: 3. The roles of CO2, H2O, and refractivity virials.

    Science.gov (United States)

    Ciddor, Philip E

    2002-04-20

    The author's recent studies of the refractive index of air are extended, and several assumptions made therein are further examined. It is shown that the alternative dispersion equations for CO2, which are due to Edlen [Metrologia 2, 71 (1966)] and Old et al. [J. Opt. Soc. Am. 61, 89 (1971)] result in differences of less than 2 x 10(-9) in the phase refractive index and less than 3 x 10(-9) in the group refractive index for current and predicted concentrations of CO2. However, because the dispersion equation given by Old et al. is consistent with experimental data in the near infrared, it is preferable to the equation used by Edlen, which is valid only in the ultraviolet and the visible. The classical measurement by Barrell and Sears [Philos. Trans. R. Soc. London Ser. A 238, 1 (1939)] on the refractivity of moist air is shown to have some procedural errors in addition to the one discussed by Birch and Downs [Metrologia 30, 155 (1993)]. It is shown that for normal atmospheric conditions the higher refractivity virial coefficients related to the Lorentz-Lorenz relation are adequately incorporated into the empirically determined first refractivity virial. As a guide to users the practical limits to the calculation of the refractive index of the atmosphere that result from the uncertainties in the measurement of the various atmospheric parameters are summarized.

  3. Investigation of the nonlinear refractive index of single-crystalline thin gold films and plasmonic nanostructures

    Science.gov (United States)

    Goetz, Sebastian; Razinskas, Gary; Krauss, Enno; Dreher, Christian; Wurdack, Matthias; Geisler, Peter; Pawłowska, Monika; Hecht, Bert; Brixner, Tobias

    2016-04-01

    The nonlinear refractive index of plasmonic materials may be used to obtain nonlinear functionality, e.g., power-dependent switching. Here, we investigate the nonlinear refractive index of single-crystalline gold in thin layers and nanostructures on dielectric substrates. In a first step, we implement a z-scan setup to investigate ~100-µm-sized thin-film samples. We determine the nonlinear refractive index of fused silica, n 2(SiO2) = 2.9 × 10-20 m2/W, in agreement with literature values. Subsequent z-scan measurements of single-crystalline gold films reveal a damage threshold of 0.22 TW/cm2 and approximate upper limits of the real and imaginary parts of the nonlinear refractive index, | n 2'(Au)| film). An upper limit for the nonlinear power-dependent phase change between two propagating near-field modes is determined to Δ φ < 0.07 rad.

  4. The refractive index in the viscous quark-gluon plasma

    CERN Document Server

    Jiang, Bing-feng; Li, Jia-rong; Gao, Yan-Jun

    2013-01-01

    Under the framework of the viscous chromohydrodynamics, the gluon self-energy is derived for the quark-gluon plasma with shear viscosity. The viscous electric permittivity and magnetic permeability are evaluated from the gluon self-energy, through which the refraction index %in the %viscous quark-gluon plasma is investigated. The numerical analysis indicates that the refractive index becomes negative in some frequency range. The start point for that frequency range is around the electric permittivity pole, and the magnetic permeability pole determines the end point. As the increase of $\\eta/s$, the frequency range for the negative refraction becomes wider.

  5. Refractive index of K9 Glass under Shock Loading

    Science.gov (United States)

    Hu, Changming; Wang, Xiang; Cai, Lingcang; Liu, Cangli

    2013-06-01

    We study K9 glass refraction index under shock loading conducted on powder gun,all experimental tests are plate impact loading. The impact veceloty range from 300m/s to 1200m/s, and the measure method is laser interferometer Photon Doppler Velocimetry(PDV) to measure the particle velocity both at the impact interface and free surface, The shock pressure from 2 GPa to 8 GPa, values for refraction are found from velocity corrections that must be made to account for refraction-index changes in the K9 glass due to shock wave motion. Experiment results show that refraction-index of K9 glass changes with the shock pressure in line relations, it can be as measure window to study the interesting materials under 10 GPa during the shock loading.

  6. Three-dimensional optical metamaterial with a negative refractive index.

    Science.gov (United States)

    Valentine, Jason; Zhang, Shuang; Zentgraf, Thomas; Ulin-Avila, Erick; Genov, Dentcho A; Bartal, Guy; Zhang, Xiang

    2008-09-18

    Metamaterials are artificially engineered structures that have properties, such as a negative refractive index, not attainable with naturally occurring materials. Negative-index metamaterials (NIMs) were first demonstrated for microwave frequencies, but it has been challenging to design NIMs for optical frequencies and they have so far been limited to optically thin samples because of significant fabrication challenges and strong energy dissipation in metals. Such thin structures are analogous to a monolayer of atoms, making it difficult to assign bulk properties such as the index of refraction. Negative refraction of surface plasmons was recently demonstrated but was confined to a two-dimensional waveguide. Three-dimensional (3D) optical metamaterials have come into focus recently, including the realization of negative refraction by using layered semiconductor metamaterials and a 3D magnetic metamaterial in the infrared frequencies; however, neither of these had a negative index of refraction. Here we report a 3D optical metamaterial having negative refractive index with a very high figure of merit of 3.5 (that is, low loss). This metamaterial is made of cascaded 'fishnet' structures, with a negative index existing over a broad spectral range. Moreover, it can readily be probed from free space, making it functional for optical devices. We construct a prism made of this optical NIM to demonstrate negative refractive index at optical frequencies, resulting unambiguously from the negative phase evolution of the wave propagating inside the metamaterial. Bulk optical metamaterials open up prospects for studies of 3D optical effects and applications associated with NIMs and zero-index materials such as reversed Doppler effect, superlenses, optical tunnelling devices, compact resonators and highly directional sources.

  7. Refractive index measurements of double-cylinder structures found in natural spider silks

    Science.gov (United States)

    Little, Douglas J.; Kane, Deb M.

    2014-05-01

    The silks of Orb-Weaver spiders (family Araneidae) are emerging as fascinating optical materials due to their biocompatibility, ecological sustainability and mechanical robustness. Natural spider silks are mainly spun as double cylinders, with diameters ranging from 0.05 to 10 μm, depending on the species and maturity of the spider. This small size makes the silks difficult to characterize optically with traditional techniques. Here, we present a technique that is capable of measuring both the real and imaginary refractive index components of spider silks. This technique is also a new capability for characterizing micro-optics more generally. It is based on the measurement and analysis of refracted light through the spider silk, or micro-optic, while it is immersed in a liquid of known refractive index. It can be applied at any visible wavelength. Results at 540 nm are reported. Real refractive indices in the range of 1.54-1.58 were measured, consistent with previous studies of spider silks. Large silk-to-silk variability of the p-polarized refractive index was observed of around 0.015, while variability in the s-polarized refractive index was negligible. No discernible difference in the refractive indices of the two cylinders making up the double cylinder silk structure were observed. Measured imaginary refractive indices corresponded to an optical loss of around 14 dB/mm at 540 nm.

  8. Refractive index determination as a tool for temperature measurement and process control: a new approach

    Science.gov (United States)

    Schaller, Johannes K.; Wassenberg, S.; Fiedler, Detlev K.; Stojanoff, Christo G.

    1994-11-01

    Recently a new method for temperature measurement of droplets was presented. This method determines the index of refraction of a spherical scatterer with high accuracy and utilizes the dependence of the index of refraction on the temperature to finally determine the temperature. In this paper we show that the method is likewise applicable to cylindrical scatterers with a homogeneous refractive index distribution, like liquid jets. The method can be used to optically determine the temperature of a liquid jet, or to measure other properties of the liquid that influence the index of refraction of that liquid. One such property is the concentration of one liquid in another, like that of glycerol in an aqueous solution, which was studied experimentally for assessing some properties of the proposed method. An estimation of the sensitivity of the method was gained by detecting temperature changes of a cylindrical water jet.

  9. Spectral Intensity Variation by the Correlation Function of Refractive Index Fluctuations of the Liquid Medium

    Directory of Open Access Journals (Sweden)

    Nageshwar Singh

    2013-01-01

    Full Text Available It is proposed that a macroscopic theory of propagation and scattering of light through random media can be functional for the dye liquid flowing media in the microscopic levels too, with modest approximations. Maxwell’s equation for a random refractive index medium is approximated and solved for the electric field. An analytical expression for the spectral intensity of the field scattered by the refractive index fluctuations inside a medium has been derived which was valid within the first Born approximation. Far field spectral intensity variation of the radiation propagating through the liquid medium is a consequence of variation in correlation function of the refractive index inhomogeneities. The strength of radiation scattered in a particular direction depends on the spatial correlation function of the refractive index fluctuations of the medium. An attempt is made to explain some of the experimentally observed spectral intensity variations, particularly dye emission propagation through liquid flowing medium, in the presence of thermal and flow field.

  10. Determination of the effective refractive index of porous silicon/polymer composite films

    Institute of Scientific and Technical Information of China (English)

    Zhenhong Jia

    2005-01-01

    The equation for calculating the effective refractive index of porous silicon inserted polymer was obtained by three-component Bruggeman effective medium model. The dependence of the effective refractive index of porous silicon/polymer composite films on the polymer fraction with various initial porosity was given theorically and experimentally respectively. The porous silicon and polymer polymethylmetacrylate based dispersive red one (PMMA/DR1) composite films were fabricated in our experiments. It is found that the measured effective refractive index of porous silicon inserted polymer was slightly lower than the calculated result because of the oxidization of porous silicon. The effective refractive index of oxidized porous silicon inserted polymer also was analyzed by four-component medium system.

  11. Low loss two-step ion-exchanged waveguides with high surface refractive index

    Science.gov (United States)

    Hassanzadeh, Abdollah; Mittler, Silvia

    2011-07-01

    Two-step ion-exchanged waveguides with high surface refractive indices are fabricated under a variety of conditions. By modifying the conventional two-step ion exchange, the losses and the effective diffusion depth can be decreased without a significant effect on the surface refractive index. The influence of the first step, K+-Na+ ion exchange, performed time dependably on the surface refractive index change is investigated. Energy-dispersive x-ray spectroscopy is performed to establish the diffusion profiles of various ions.

  12. Refractive Index Measurement of the Isolated Crystalline Lens Using Optical Coherence Tomography

    Science.gov (United States)

    Uhlhorn, Stephen R.; Borja, David; Manns, Fabrice; Parel, Jean-Marie

    2008-01-01

    An optical coherence tomography system has been developed that was designed specifically for imaging the isolated crystalline lens. Cross-sectional OCT images were recorded on 40 lenses from 32 human donors with an age range of 6 – 82 years. A method has been developed to measure the axial thickness and average refractive index of the lens from a single recorded image. The measured average group refractive index at the measurement wavelength of 825 nm was converted to the average phase refractive index at 589 nm using lens dispersion data from the literature. The average refractive index for all lenses measured was 1.408 ± 0.005 which agrees well with recent MRI measurements of the lens index gradient. A linear regression of the data resulted in a statistically significant decrease in the average refractive index with age, but a simple linear model was insufficient to explain the age dependence. The results presented here suggest that the peak refractive index in the nucleus is closer to 1.420, rather than the previously accepted value of 1.406. PMID:18824191

  13. Integrated Microfibre Device for Refractive Index and Temperature Sensing

    Directory of Open Access Journals (Sweden)

    Sulaiman W. Harun

    2012-08-01

    Full Text Available A microfibre device integrating a microfibre knot resonator in a Sagnac loop reflector is proposed for refractive index and temperature sensing. The reflective configuration of this optical structure offers the advantages of simple fabrication and ease of sensing. To achieve a balance between responsiveness and robustness, the entire microfibre structure is embedded in low index Teflon, except for the 0.5–2 mm diameter microfibre knot resonator sensing region. The proposed sensor has exhibited a linear spectral response with temperature and refractive index. A small change in free spectral range is observed when the microfibre device experiences a large refractive index change in the surrounding medium. The change is found to be in agreement with calculated results based on dispersion relationships.

  14. Optofluidic whispering gallery mode microcapillary lasers for refractive index sensing

    Science.gov (United States)

    François, Alexandre; Riesen, Nicolas; Gardner, Kristy; Monro, Tanya M.; Meldrum, Al

    2016-12-01

    Whispering gallery modes (WGMs) allow for remarkable refractive index sensing performance with extremely low detection limits, and thus have found use in various emerging label free biosensing applications. Among the different types of resonators which have been studied, microcapillaries have the unique property of having the evanescent fields extend into and sample the medium inside the resonator, which is particularly interesting because the resonator itself serves as a microfluidic channel. Here, lasing of the WGMs in fluorescent microcapillaries is demonstrated for the first time, and their application to refractive index sensing is investigated. The laser gain medium used here is embedded inside a high refractive index polymer coating deposited onto the inner surface of the capillary. Lasing can only be realized for thick polymer coatings (in this case >= 800 nm), with higher Q factor but also stronger confinement of the propagating wave, which lowers the refractive index sensitivity compared to non-lasing capillaries which can have thinner polymer coatings. We however find that the large improvement in signal-to-noise ratio and Q factor realized upon lasing more than compensates for the reduced sensitivity, resulting in an order-of-magnitude improvement in the detection limit for refractive index sensing.

  15. Controlling a microdisk laser by local refractive index perturbation

    Energy Technology Data Exchange (ETDEWEB)

    Liew, Seng Fatt; Redding, Brandon; Cao, Hui, E-mail: hui.cao@yale.edu [Department of Applied Physics, Yale University, New Haven, Connecticut 06520 (United States); Ge, Li [Department of Engineering Science and Physics, College of Staten Island, CUNY, Staten Island, New York 10314 (United States); The Graduate Center, CUNY, New York, New York 10016 (United States); Solomon, Glenn S. [Joint Quantum Institute, NIST and University of Maryland, Gaithersburg, Maryland 20899 (United States)

    2016-02-01

    We demonstrate a simple yet effective approach of controlling lasing in a semiconductor microdisk by photo-thermal effect. A continuous wave green laser beam, focused onto the microdisk perimeter, can enhance or suppress lasing in different cavity modes, depending on the position of the focused beam. Its main effect is a local modification of the refractive index of the disk, which results in an increase in the power slope of some lasing modes and a decrease of others. The boundary roughness breaks the rotational symmetry of a circular disk, allowing the lasing process to be tuned by varying the green beam position. Using the same approach, we can also fine tune the relative intensity of a quasi-degenerate pair of lasing modes. Such post-fabrication control, enabled by an additional laser beam, is flexible and reversible, thus enhancing the functionality of semiconductor microdisk lasers.

  16. Flexible photonic crystal membranes with nanoparticle high refractive index layers

    Directory of Open Access Journals (Sweden)

    Torben Karrock

    2017-01-01

    Full Text Available Flexible photonic crystal slabs with an area of 2 cm2 are fabricated by nanoimprint replication of a 400 nm period linear grating nanostructure into a ≈60 µm thick polydimethylsiloxane membrane and subsequent spin coating of a high refractive index titanium dioxide nanoparticle layer. Samples are prepared with different nanoparticle concentrations. Guided-mode resonances with a quality factor of Q ≈ 40 are observed. The highly flexible nature of the membranes allows for stretching of up to 20% elongation. Resonance peak positions for unstretched samples vary from 555 to 630 nm depending on the particle concentration. Stretching results in a resonance shift for these peaks of up to ≈80 nm, i.e., 3.9 nm per % strain. The color impression of the samples observed with crossed-polarization filters changes from the green to the red regime. The high tunability renders these membranes promising for both tunable optical devices as well as visualization devices.

  17. Refraction index sensor based on phase resonances in a subwavelength structure with double period.

    Science.gov (United States)

    Skigin, Diana C; Lester, Marcelo

    2016-10-01

    In this paper, we numerically demonstrate a refraction index sensor based on phase resonance excitation in a subwavelength-slit structure with a double period. The sensor consists of a metal layer with subwavelength slots arranged in a bi-periodic form, separated from a high refraction index medium. Between the metallic structure and the incident medium, a dielectric waveguide is formed whose refraction index is going to be determined. Variations in the refraction index of the waveguide are detected as shifts in the peaks of transmitted intensity originated by resonant modes supported by the compound metallic structure. At normal incidence, the spectral position of these resonant peaks exhibits a linear or a quadratic dependence with the refraction index, which permits us to obtain the unknown refraction index value with a high precision for a wide range of wavelengths. Since the operating principle of the sensor is due to the morphological resonances of the slits' structure, this device can be scaled to operate in different wavelength ranges while keeping similar characteristics.

  18. Enhanced nonlinear refractive index in epsilon-near-zero materials

    CERN Document Server

    Caspani, L; Clerici, M; Ferrera, M; Roger, T; Di Falco, A; Kim, J; Kinsey, N; Shalaev, V M; Boltasseva, A; Faccio, D

    2016-01-01

    New propagation regimes for light arise from the ability to tune the dielectric permittivity to extremely low values. Here we demonstrate a universal approach based on the low linear permittivity values attained in the epsilon-near-zero (ENZ) regime for enhancing the nonlinear refractive index, which enables remarkable light-induced changes of the material properties. Experiments performed on Al-doped ZnO (AZO) thin films show a six-fold increase of the Kerr nonlinear refractive index ($n_2$) at the ENZ wavelength, located in the 1300 nm region. This in turn leads to light-induced refractive index changes of the order of unity, thus representing a new paradigm for nonlinear optics.

  19. Refractive Index Sensor Using a Two-Hole Fiber

    Energy Technology Data Exchange (ETDEWEB)

    Lopez-Cortes, D; Sanchez-Mondragon, J J [Photonics and Optical Physics Laboratory, Optics Department, INAOE Apdo. Postal 51 and 216, Tonantzintla, Puebla 72000 (Mexico); Margulis, W [Department Fiber Photonics, ACREO, Electrum 236, 16440 Stockholm (Sweden); Dominguez-Cruz, R; May-Arrioja, D A, E-mail: darrioja@uat.edu.mx [Depto. de Ingenieria Electronica, UAM Reynosa Rodhe, Universidad Autonoma de Tamaulipas, Carr. Reynosa-San Fernando S/N, Reynosa, Tamaulipas 88779 (Mexico)

    2011-01-01

    We propose to use a twin-hole fiber to measure refractive index of liquids. The key idea is to have a single mode fiber (SMF) having two large air-holes running along the fiber length, the holes do not interact with the core. However, using wet chemical etching we can have access to the hole around the fiber, and further etching increases the holes diameter. The diameter is increased until the fiber exhibits a specific birefringence. Since the holes are open, by immersing the fiber in different liquids (n=1.33 to n=1.42) the value of the birefringence is modified and the refractive index of the liquid can be estimated from the change on the beat length. This process provides a very simple and highly sensitive mechanism for sensing refractive index in liquids, and can also be used for other applications.

  20. Optical sensors of bulk refractive index using optical fiber resonators

    Science.gov (United States)

    Eryürek, M.; Karadag, Y.; Ghafoor, M.; Bavili, N.; Cicek, K.; Kiraz, A.

    2017-05-01

    Optical fiber resonator (OFR) sensor is presented for bulk liquid refractive index (RI) sensing. The sensing mechanism relies on the spectral shifts of whispering gallery modes (WGMs) of OFRs which are excited using a tapered fiber. OFR liquid RI sensor is fully characterized using water solutions of ethanol and ethylene glycol (EG). A good agreement is achieved between the analytical calculations and experimental results for both TE and TM polarizations. The detection limit for bulk RI is calculated to be between 2.7 - 4.7 × 10-5 refractive index unit (RIU). The OFR sensor provides a robust, easy-to-fabricate and sensitive liquid refractive index sensor which can be employed in lab-on-a-chip applications.

  1. Sensitivity Analysis of a Bioinspired Refractive Index Based Gas Sensor

    Institute of Scientific and Technical Information of China (English)

    Yang Gao; Qi Xia; Guanglan Liao; Tielin Shi

    2011-01-01

    It was found out that the change of refractive index of ambient gas can lead to obvious change of the color of Morpho butterfly's wing. Such phenomenon has been employed as a sensing principle for detecting gas. In the present study, Rigorous Coupled-Wave Analysis (RCWA) was described briefly, and the partial derivative of optical reflection efficiency with respect to the refractive index of ambient gas, i.e., sensitivity of the sensor, was derived based on RCWA. A bioinspired grating model was constructed by mimicking the nanostructure on the ground scale of Morpho didius butterfly's wing. The analytical sensitivity was verified and the effect of the grating shape on the reflection spectra and its sensitivity were discussed. The results show that by tuning shape parameters of the grating, we can obtain desired reflection spectra and sensitivity, which can be applied to the design of the bioinspired refractive index based gas sensor.

  2. Refractive-Index Sensing with Ultrathin Plasmonic Nanotubes

    DEFF Research Database (Denmark)

    Raza, Søren; Toscano, Giuseppe; Jauho, Antti-Pekka

    2013-01-01

    We study the refractive-index sensing properties of plasmonic nanotubes with a dielectric core and ultrathin metal shell. The few nanometer thin metal shell is described by both the usual Drude model and the nonlocal hydrodynamic model to investigate the effects of nonlocality. We derive an analy......We study the refractive-index sensing properties of plasmonic nanotubes with a dielectric core and ultrathin metal shell. The few nanometer thin metal shell is described by both the usual Drude model and the nonlocal hydrodynamic model to investigate the effects of nonlocality. We derive...... an analytical expression for the extinction cross section and show how sensing of the refractive index of the surrounding medium and the figure of merit are affected by the shape and size of the nanotubes. Comparison with other localized surface plasmon resonance sensors reveals that the nanotube exhibits...

  3. Creating Materials with Negative Refraction Index using Topology Optimization

    DEFF Research Database (Denmark)

    Christiansen, Rasmus Ellebæk; Sigmund, Ole

    We apply topology optimization along with full modeling of the electromagnetic (acoustic) field to create metamaterials with negative refraction index. We believe that our approach can be used in the design of metamaterials with specific effective permittivity and permeability e.g. by adapting...... is on the order of the wavelength. We seek a distribution of solid and air in the design cell yielding a prescribed negative refraction index for the slab. Our objective is to minimize the difference in amplitude between the solution to the model problemand a prescribed modulated plane wave behind the slab....... The direction of propagation for the prescribed wave is chosen to match the angle of incidence of the incoming plane wave and its position isused to select the refraction index for the slab. We introducing a continuous design field and apply The Method of Moving Asymptotes to perform the optimization. A filter...

  4. Absorption and refractive index recovery in an InGaAsP MQW electro-absorption modulator

    DEFF Research Database (Denmark)

    Romstad, Francis Pascal; Mørk, Jesper; Hvam, Jørn Märcher

    2001-01-01

    We show the first measurements of gain and refractive index recovery in an electro-absorber. The measurements show strong dependence of the refractive index dynamics on the reverse bias. The results are discussed in relation to field screening following the optical carrier injection....

  5. The influence of refractive index change and initial bending of cantilevers on the optical lever readout method

    DEFF Research Database (Denmark)

    Dohn, Søren; Greve, Anders; Svendsen, Winnie Edith

    2010-01-01

    lever technique is used to monitor a cantilever with initial bending during changes in the refractive index of the surrounding media. We find that for changes in refractive index as small as 10−4 the detector signal is highly dependent on the initial bending of the cantilever. The findings are validated...

  6. Ultraviolet light induced refractive index structures in germanosilica

    DEFF Research Database (Denmark)

    Svalgaard, Mikael

    1997-01-01

    The focus of the research presented in this ph.d. thesis is refractive index structures photoinduced in germanonsilica waveguides with ultra-violet (UV) radiation. The physical mechanisms involved in photosensitivity and applications of a wide range of UV induced refractive index structures in both...... bulk optics. Finally, I have developed a new method for direct UV writing of planar waveguide devices using a focussed continuous wave UV laser beam which is scanned across a photosensitive thin film deposited on a silicon wafer. Contrary to other waveguide fabrication techniques this method requires...

  7. Overcoming losses with gain in a negative refractive index metamaterial.

    Science.gov (United States)

    Wuestner, Sebastian; Pusch, Andreas; Tsakmakidis, Kosmas L; Hamm, Joachim M; Hess, Ortwin

    2010-09-17

    On the basis of a full-vectorial three-dimensional Maxwell-Bloch approach we investigate the possibility of using gain to overcome losses in a negative refractive index fishnet metamaterial. We show that appropriate placing of optically pumped laser dyes (gain) into the metamaterial structure results in a frequency band where the nonbianisotropic metamaterial becomes amplifying. In that region both the real and the imaginary part of the effective refractive index become simultaneously negative and the figure of merit diverges at two distinct frequency points.

  8. Broadband negative refractive index obtained by plasmonic hybridization in metamaterials

    Science.gov (United States)

    Nguyen, Hien T.; Bui, Tung S.; Yan, Sen; Vandenbosch, Guy A. E.; Lievens, Peter; Vu, Lam D.; Janssens, Ewald

    2016-11-01

    We experimentally demonstrate a broadband negative refractive index (NRI) behavior in combined dimer and fishnet dimer metamaterials operating in the GHz frequency range. The observations can be well explained by a hybridization model and are in agreement with numerical modelling results. Hybridization of the magnetic resonances is obtained by reducing the distance between the layers in the dimer structures. A ratio of the double negative refractive index bandwidth to operational frequency of approximately 10% was achieved in the fishnet dimer. The applicable frequency range of the broadband NRI was shown to scale with the size of the structures from the microwave to the far infrared.

  9. Silicon photonic crystal nanostructures for refractive index sensing

    DEFF Research Database (Denmark)

    Dorfner, Dominic; Hürlimann, T.; Zabel, T.

    2008-01-01

    The authors present the fabrication and optical investigation of Silicon on Insulator photonic crystal drop-filters for use as refractive index sensors. Two types of defect nanocavities (L3 and H1-r) are embedded between two W1 photonic crystal waveguides to evanescently route light at the cavity...... mode frequency between input and output waveguides. Optical characterization of the structures in air and various liquids demonstrate detectivities in excess of n=n = 0:018 and n=n = 0:006 for the H1-r and L3 cavities, respectively. The measured cavity-frequencies and detector refractive index...

  10. Modified refractive index of zinc sulfide nanoparticles doped glasses

    Directory of Open Access Journals (Sweden)

    M. Moussaoui

    2011-09-01

    Full Text Available ZnS nanoparticles (NPs embedded in an oxide glass have been achieved in the present work by melting process. The UV-visible absorption and fluorescence properties of these doped and undoped glasses have been evaluated and compared. Studies on absorption spectra showed that the size of the ZnS NPs was near to 2 nm. Doped glass fluorescence characterized by laser confocale microscopy is centered at about 620 nm. We measured also the refractive index of ZnS doped glasses. The maximum refractive index difference between the undoped and ZnS doped glasses was found about 0.1 (l = 632.8 nm.

  11. Studying of refractive index measurements in reflected light

    CERN Document Server

    Tikhonov, E A

    2010-01-01

    Two methods of refractometry in reflected light from optical surface of samples are considered and studied experimentally. Methods are grounded on results of Fresnel theory of concerning light reflectivity at near normal incidence and Brewster angle. Sources of errors for both methods were considered and possibility of measuring of the refractive index with application of laser radiation with accuracy to within 4th sign was shown. Advantages of described methods concerning requirements to preparation of samples to refractive index measurement of solid, thin-film and absorbing materials are scored.

  12. Rainbow refractometry on particles with radial refractive index gradients

    Energy Technology Data Exchange (ETDEWEB)

    Saengkaew, Sawitree [CNRS/Universite et INSA de Rouen, UMR 6614/CORIA, BP12, 76 800, Saint Etienne du Rouvray CEDEX (France); Chulalongkorn University, Center of Excellence in Particle Technology, Faculty of Engineering, Bangkok (Thailand); Charinpanitkul, Tawatchai; Vanisri, Hathaichanok; Tanthapanichakoon, Wiwut [Chulalongkorn University, Center of Excellence in Particle Technology, Faculty of Engineering, Bangkok (Thailand); Biscos, Yves; Garcia, Nicolas; Lavergne, Gerard [ONERA/DMAE, Toulouse (France); Mees, Loic; Gouesbet, Gerard; Grehan, Gerard [CNRS/Universite et INSA de Rouen, UMR 6614/CORIA, BP12, 76 800, Saint Etienne du Rouvray CEDEX (France)

    2007-10-15

    The rainbow refractrometry, under its different configurations (classical and global), is an attractive technique to extract information from droplets in evaporation such as diameter and temperature. Recently a new processing strategy has been developed which increases dramatically the size and refractive index measurements accuracy for homogeneous droplets. Nevertheless, for mono component as well as for multicomponent droplets, the presence of temperature and/or of concentration gradients induce the presence of a gradient of refractive index which affects the interpretation of the recorded signals. In this publication, the effect of radial gradient on rainbow measurements with a high accuracy never reached previously is quantified. (orig.)

  13. Measurements of photoinduced refractive index changes in bacteriorhodopsin films

    Indian Academy of Sciences (India)

    Ravinder Kumar Banyal; B Raghavendra Prasad

    2007-03-01

    We report the pump-probe measurements of nonlinear refractive index changes in photochromic bacteriorhodopsin films. The photoinduced absorption is caused by pump beam at 532 nm and the accompanying refractive index changes are studied using a probe beam at 633 nm. The proposed technique is based on a convenient and accurate determination of optical path difference using digital interferometry-based local fringe shift. The results are presented for the wild-type as well as genetically modified D96N variant of the bacteriorhodopsin.

  14. Nano-imprint gold grating as refractive index sensor

    Science.gov (United States)

    Kumari, Sudha; Mohapatra, Saswat; Moirangthem, Rakesh S.

    2016-05-01

    Large scale of fabrication of plasmonic nanostructures has been a challenging task due to time consuming process and requirement of expensive nanofabrication tools such as electron beam lithography system, focused ion beam system, and extreme UV photolithography system. Here, we present a cost-effective fabrication technique so called soft nanoimprinting to fabricate nanostructures on the larger sample area. In our fabrication process, a commercially available optical DVD disc was used as a template which was imprinted on a polymer glass substrate to prepare 1D polymer nano-grating. A homemade nanoimprinting setup was used in this fabrication process. Further, a label-free refractive index sensor was developed by utilizing the properties of surface plasmon resonance (SPR) of a gold coated 1D polymer nano-grating. Refractive index sensing was tested by exposing different solutions of glycerol-water mixture on the surface of gold nano-grating. The calculated bulk refractive index sensitivity was found to be 751nm/RIU. We believed that our proposed SPR sensor could be a promising candidate for developing low-cost refractive index sensor with high sensitivity on a large scale.

  15. The Painful Derivation of the Refractive Index from Microscopical Considerations

    NARCIS (Netherlands)

    Hoenders, Bernhard J.; Tata, Darrell B.; Waynant, Ronald W.

    2008-01-01

    The derivation of the refractive index from the microscopical structure of matter is analysed in detail. In particular the many various assumptions leading to the basic Clausius-Mosotti (Lorentz-Lorenz) equation are carefully stated. The most general formulation of the second order correlation

  16. Effect of Effective Refractive Index of Grating in FBG Splitter

    Directory of Open Access Journals (Sweden)

    DINESH ARORA

    2011-09-01

    Full Text Available The Fiber Bragg Gratings have been used extensively in the communication industry. Fiber Bragg grating is written directly into the core of the optical fiber and it is quite an attractive technique for wavelength splitter since it provides high reflectivity at a certain wavelength, with negligible transmission losses for others, providing a wavelength-channel selection with low crosstalk between adjacent channels.In this paper we propose a Fiber Bragg Grating base splitter with alteration of effective refractive index of grating for Ethernet passive optical network. With the increase in the effective refractive index the reflectivity of grating is increased. We analysed the effect of effective refractive index on reflectivity of grating. In our work the Bragg wavelength has been fixed at 1550 nm,length of the grating as 10mm and with effective refractive index as 4.0 it has been found that the reflectivity of the grating or the effectiveness of the grating in extracting the wavelength is 92-93%.

  17. Refractive index determination in axially symmetric oprtically inhomogeneous media

    Science.gov (United States)

    Ionescu-Pallas, Nicholas; Vlad, Valentin I.; Bociort, Florian

    The focussing method from transversally light, put forward by Dietrich Marcuse in view of determining the refractive index profile (RIP) in optical fibers and fiber performs, is revised. A more rigorous derivation of the Marcuse formula is given, establishing the conditions of its validity and a simplified version is initially proposed, able to avoid the systematic errors in the processing of light intensity data.

  18. Measuring Refractive Index Using the Focal Displacement Method (Postprint)

    Science.gov (United States)

    2014-05-01

    Dayton, Ohio 45431 Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std. Z39-18 Measuring refractive index using the focal...Corp., Dayton, Ohio 45431 , USA 3Air Force Research Laboratory, Wright-Patterson AFB, Ohio 45433, USA Received 25 March 2014; accepted 22 April 2014

  19. Quasi-guiding modes in microfibers on high refractive index substrate

    CERN Document Server

    Wang, Kaiyang; Sun, Wenzhao; Li, Jiankai; Xiao, Shumin; Song, Qinghai

    2015-01-01

    Light confinement and amplification in micro- & nano-fiber have been intensively studied and a number of applications have been developed. However, the typical micro- & anno- fibers are usually free-standing or positioned on a substrate with lower refractive index to ensure the light confinement and guiding mode. Here we numerically and experimentally demonstrate the possibility of confining light within a microfiber on a high refractive index substrate. In contrast to the strong leaky to the substrate, we found that the radiation loss was dependent on the radius of microfiber and the refractive index contrast. Consequently, quasi-guiding modes could be formed and the light could propagate and be amplified in such systems. By fabricating tapered silica fiber and dye-doped polymer fiber and placing them on sapphire substrates, the light propagation, amplification, and laser behaviors have been experimentally studied to verify the quasi-guiding modes in microfer with higher index substrate. We believe t...

  20. The influence of protein fractions and electrolyte imbalance on refractive index of serum in patients with multiple myeloma

    Science.gov (United States)

    Plotnikova, L.; Polyanichko, A.; Kobeleva, M.; Uspenskaya, M.; Garifullin, A.; Voloshin, S.

    2017-01-01

    Refractometric analysis is very rapid, accurate and simple method of analysis measuring refractive index of biological liquids such as serum, plasma, spinal fluid, urine. This method can be used for definition total protein and solids concentrations in serum. The value of refractive index depends on all substances in serum including proteins, lipids as well as low molecular weight compounds, for example ions of different metals. Refractometric analysis shows strong correlations between protein concentrations in serum of patients with multiple myeloma and its(serum) refractive index which depends on protein concentration and doesn’t depends on electrolyte disbalance.

  1. Structures with negative index of refraction

    Science.gov (United States)

    Soukoulis, Costas M [Ames, IA; Zhou, Jiangfeng [Ames, IA; Koschny, Thomas [Ames, IA; Zhang, Lei [Ames, IA; Tuttle, Gary [Ames, IA

    2011-11-08

    The invention provides simplified negative index materials (NIMs) using wire-pair structures, 4-gap single ring split-ring resonator (SRR), fishnet structures and overleaf capacitor SRR. In the wire-pair arrangement, a pair of short parallel wires and continuous wires are used. In the 4-gap single-ring SRR, the SRRs are centered on the faces of a cubic unit cell combined with a continuous wire type resonator. Combining both elements creates a frequency band where the metamaterial is transparent with simultaneously negative .di-elect cons. and .mu.. In the fishnet structure, a metallic mesh on both sides of the dielectric spacer is used. The overleaf capacitor SRR changes the gap capacities to small plate capacitors by making the sections of the SRR ring overlap at the gaps separated by a thin dielectric film. This technique is applicable to conventional SRR gaps but it best deploys for the 4-gap single-ring structures.

  2. Negative refractive index metamaterials aided by extraordinary optical transmission.

    Science.gov (United States)

    García-Meca, C; Ortuño, R; Rodríguez-Fortuño, F J; Martí, J; Martínez, A

    2009-04-13

    We study under which conditions extraordinary optical transmission (EOT) structures can be used to build negative refractive index media. As a result, we present a metamaterial with superimposed EOT and negative index at visible wavelengths. The tailoring process starting from a simple hole array until achieving the negative index is detailed. We also discuss the so-called fishnet metamaterial (previously linked to EOT) under the same prism. Using the ideas put forward in this work, other structures with negative index could be engineered in the optical or visible spectrum.

  3. Two-dimensional refractive index and birefringence profiles of a graded index bent optical fibre

    Science.gov (United States)

    Ramadan, W. A.; Wahba, H. H.; Shams El-Din, M. A.

    2017-07-01

    A theory to recover refractive index profile of the bent graded index (GRIN) optical fibre, in core region, is proposed. This theory is applied to the bent GRIN optical fibre when it is located orthogonal in the light path of the object arm in digital holographic phase shifting interferometer; like Mach-Zehnder interferometer. In the experiment, the fibre is bent with two different bending radii and fixed on a microscope slide keeping it immersed in matching liquid. The produced phase shifted holograms, with the presence of the fibre, are recorded using an attached CCD camera. Two different processes controlling the index profile shape of the bent GRIN optical fibre are assumed. In the first process, a linear index variation is evolved from stresses in the direction of the bent radius. In the second one, there is a release of these stresses near the fibre surface, which depends on the fibre's radius. This will affect the outer free surface of the cladding. Based on these assumptions, we are able to construct the index profile in two dimensions normal to the optical axis. We propose two functions to describe the refractive index profiles in cladding and the core regions of the bent GRIN optical fibre. The recorded phase shifted holograms are combined, reconstructed and analyzed to get the phase map of the bent GRIN optical fibre. Comparing the extracted optical phase differences with the calculated ones, a good agreement between them is found. This means that the used two dimensional proposed functions, which are describing cladding and the core indices profiles, are the most proper in this situation. Thus, we are able to determine a realistic induced birefringence profile inside the fibre which is generated by a bending operation, not only in the cladding but also in graded index core region as well.

  4. An updated equation for the refractive index of air

    Science.gov (United States)

    Li, Wenchen; Dai, Zuoxiao; Dai, Ning; Chen, Ren; Sun, Xiaojie; Xia, Xiang; Li, Tao; Ma, Bei; Sheng, Hao

    2014-12-01

    Laser has been widely used in spectroscopic and metrological measurement. High-precision laser metrology is affected by the refractive index of air. In order to apply the algorithm for the refractive index of air in some situation where low calculation complexity and high-precision are needed, the algorithm of the refractive index of Rueger is updated. As the errors of Rueger's algorithm are mainly affected by temperature, humidity, and the concentration of carbon dioxide in the atmosphere as well as laser wavelength, we do some revisions about these effects of the factors of atmosphere in Rueger's algorithm. The conditions of standard air is redefined in this paper because of the average concentration of carbon dioxide in the atmosphere has been changed in the past few decades. As the concentration of carbon dioxide in the air is not constant, the effect of carbon dioxide on the refractive index of air is taken into consideration in the updated algorithm. The updated algorithm adapts to the real atmosphere well. The effects of dry air and humid air on the algorithm are also corrected, and the refractive index of air calculated by the updated algorithm is much closer to that of Philip E.Ciddor's algorithm defined as reference algorithm in the paper because of its high-precision. The performance of the updated algorithm is also analyzed in this paper. It is compared to that of the reference algorithm and the real measured data. Comparing results show that the performance of the algorithm has been improved after the correction. Comparing to the reference algorithm, the performance of the updated algorithm is a little bit lower, but the updated algorithm is much simpler and easier to be applied. Comparing to Rueger's algorithm, the performance of the updated algorithm is much higher and the complexity of the updated algorithm increases very small. The updated algorithm meets low calculation complexity and high-precision requirements.

  5. Dispersion of the nonlinear refractive index of optical crystals

    Science.gov (United States)

    Adair, Robert; Chase, L. L.; Payne, Stephen A.

    1992-09-01

    The nonlinear refractive indices of several important optical materials have been measured at the second and third harmonic wavelengths of the Nd laser using nearly degenerate four-wave mixing. Measurements made relative to the nonlinear index of fused silica have the highest accuracy. Absolute measurements were also made using the Raman cross-section of benzene as a nonlinear reference standard. The relative measurements are compared with a despersion model base on parameters fitted to the linear refractive indicies and also to a recently proposed model based on Kramers-Kronig transformation of the calculated, two-band, two-photon loss spectrum.

  6. Refractive Index Sensing Using Visible Electromagnetic Resonances of Supported Cu2O Particles.

    Science.gov (United States)

    Susman, Mariano D; Vaskevich, Alexander; Rubinstein, Israel

    2017-03-08

    Plasmonic metal nanostructures, in colloidal or surface-supported forms, have been extensively studied in the context of metamaterials design and applications, in particular as refractometric sensing platforms. Recently, high refractive index (high-n) dielectric subwavelength structures have been experimentally shown to support strong Mie scattering resonances, predicted to exhibit analogous refractive index sensing capabilities. Here we present the first experimental demonstration of the use of supported high-n dielectric nano/microparticle ensembles as refractive index sensing platforms, using cuprous oxide as a model high-n material. Single-crystalline Cu2O particles were deposited on transparent substrates using a chemical deposition scheme, showing well-defined electric and magnetic dipolar resonances (EDR and MDR, respectively) in the visible range, which change in intensity and wavelength upon changing the medium refractive index (nm). The significant modulation of the MDR intensity when nm is modified appears to be the most valuable empirical sensing parameter. The Mie scattering properties of Cu2O particles, particularly the spectral dependence of the MDR on nm, are theoretically modeled to support the experimental observations. MDR extinction changes (i.e., refractive index sensitivity) per particle are >100 times higher compared to localized surface plasmon resonance (LSPR) changes in supported Au nanoislands, encouraging the evaluation of Cu2O and other high-n dielectric particles and sensing modes in order to improve the sensitivity in optical (bio)sensing applications.

  7. Study on Microcavity Organic Light-emitting Devices Containing Negative Refractive Index Dielectric Layer

    Institute of Scientific and Technical Information of China (English)

    CAI Hong-xin; LI Li-xin

    2009-01-01

    A new structure containing negative refractive index dielectric layer(NRIDL) is introduced into microcavity.The properties of the new microcavity organic light-emitting devices(MOLEDs) are investigated.In the experiment,the transfer matrix method is adopted.The dependence of reflectance and transmittance on the refractive index and thickness of NRIDL are analyzed in detail.Compared with the electroluminescence spectra of non-NRIDL diodes,the line widths of the spectra of the MOLEDs are narrower and all the peaks enhance.The results show that the new structure is beneficial to improve the performance and reduce the thickness of microcavity devices.

  8. The Causal Structure of QED in Curved Spacetime: Analyticity and the Refractive Index

    CERN Document Server

    Hollowood, Timothy J

    2008-01-01

    The effect of vacuum polarization on the propagation of photons in curved spacetime is studied in scalar QED. A compact formula is given for the full frequency dependence of the refractive index for any background in terms of the Van Vleck-Morette matrix for its Penrose limit and it is shown how the superluminal propagation found in the low-energy effective action is reconciled with causality. The geometry of null geodesic congruences is found to imply a novel analytic structure for the refractive index and Green functions of QED in curved spacetime, which preserves their causal nature but violates familiar axioms of S-matrix theory and dispersion relations. The general formalism is illustrated in a number of examples, in some of which it is found that the refractive index develops a negative imaginary part, implying a stimulated emission of photons as an electromagnetic wave propagates through curved spacetime.

  9. Refractive index engineering with subwavelength gratings for efficient microphotonic couplers and planar waveguide multiplexers.

    Science.gov (United States)

    Cheben, Pavel; Bock, Przemek J; Schmid, Jens H; Lapointe, Jean; Janz, Siegfried; Xu, Dan-Xia; Densmore, Adam; Delâge, André; Lamontagne, Boris; Hall, Trevor J

    2010-08-01

    We use subwavelength gratings (SWGs) to engineer the refractive index in microphotonic waveguides, including practical components such as input couplers and multiplexer circuits. This technique allows for direct control of the mode confinement by changing the refractive index of a waveguide core over a range as broad as 1.6-3.5 by lithographic patterning. We demonstrate two experimental examples of refractive index engineering, namely, a microphotonic fiber-chip coupler with a coupling loss as small as -0.9dB and minimal wavelength dependence and a planar waveguide multiplexer with SWG nanostructure, which acts as a slab waveguide for light diffracted by the grating, while at the same time acting as a lateral cladding for the strip waveguide. This yields an operation bandwidth of 170nm for a device size of only approximately 160microm x100microm.

  10. Towards a Negative Refractive Index in an Atomic System

    Science.gov (United States)

    Simmons, Zach; Brewer, Nick; Yavuz, Deniz

    2014-05-01

    The goal of our experiments is to obtain a negative index of refraction in the optical region of the spectrum using an atomic system. The concept of negative refraction, which was first predicted by Veselago more than four decades ago, has recently emerged as a very exciting field of science. Negative index materials exhibit many seemingly strange properties such as electromagnetic vectors forming a left-handed triad. A key potential application for these materials was discovered in 2000 when Pendry predicted that a slab with a negative refractive index can image objects with a resolution far better than the diffraction limit. Thus far, research in negative index materials has primarily focused on meta-materials. The fixed response and often large absorption of these engineered materials motivates our efforts to work in an atomic system. An atomic media offers the potential to be actively modified, for example by changing laser parameters, and can be tuned to cancel absorption. A doped crystal allows for high atomic densities compared to other atomic systems. So far we have identified a transition in such a material, Eu:YSO, as a candidate for these experiments and are performing spectroscopy on this material.

  11. Laplace-Gauss and Helmholtz-Gauss paraxial modes in media with quadratic refraction index.

    Science.gov (United States)

    Kiselev, Aleksei P; Plachenov, Alexandr B

    2016-04-01

    The scalar theory of paraxial wave propagation in an axisymmetric medium where the refraction index quadratically depends on transverse variables is addressed. Exact solutions of the corresponding parabolic equation are presented, generalizing the Laplace-Gauss and Helmholtz-Gauss modes earlier known for homogeneous media. Also, a generalization of a zero-order asymmetric Bessel-Gauss beam is given.

  12. The refractive index of zinc oxide microwire single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Czekalla, Christian; Kuehne, Philipp; Sturm, Chris; Schmidt-Grund, Ruediger; Grundmann, Marius [Universitaet Leipzig (Germany). Fakultaet fuer Physik und Geowissenschaften, Institut fuer Experimentelle Physik II

    2010-07-01

    Among a large number of applications, zinc oxide (ZnO) single crystals (bulk and micro- and nanowires) are expected to form important building blocks for future optoelectronic devices like light emitting and laser diodes. Optical resonances from ZnO structures have been observed by a number of groups in the past years. In most of the publications, modeling of the mode structure, especially in the near bandgap spectral region, is difficult because the energy dependent refractive index n(E) is typically not known. Additionally, in case of the self assembled micro- and nanowires, the structures are too small to perform spectroscopic ellipsometry to determine n(E). We compare n(E) obtained from (a) spectroscopic ellipsometry measurements of ZnO bulk single crystals and (b) spatially resolved photoluminescence measurements of ZnO microwires employing a plane wave whispering gallery mode model for the observed resonances. We discuss the differences between the results obtained from the two methods and their mutual impact, leading to a highly precise determination of n(E) in an energy range between 1.80 eV and 3.25 eV and for temperatures between 10 K and 295 K.

  13. Dynamics of photoinduced refractive index changes in As2S3 fibers.

    Science.gov (United States)

    Kabakova, Irina V; Zou, Liner; Brawley, George A; Florea, Catalin; Aggarwal, Ishwar D; Sanghera, Jasbinder S; Mägi, Eric C; Li, Enbang; Eggleton, Benjamin J

    2012-10-20

    We investigate the dynamics of photoinduced index changes in chalcogenide As(2)S(3) fibers. Using a novel phase sensitive technique for measuring the photoinduced index change, we find that the index evolution is a two-stage process: it consists of a fast reduction and a subsequent slow increase in the refractive index. We show that the index change depends strongly on the beam intensity with both positive and negative changes possible. These findings can have application in design and fabrication of photoinduced devices such as Bragg gratings and photonic cavities.

  14. Refractive Index Compensation in Over-Determined Interferometric Systems

    Directory of Open Access Journals (Sweden)

    Zdeněk Buchta

    2012-10-01

    Full Text Available We present an interferometric technique based on a differential interferometry setup for measurement under atmospheric conditions. The key limiting factor in any interferometric dimensional measurement are fluctuations of the refractive index of air representing a dominating source of uncertainty when evaluated indirectly from the physical parameters of the atmosphere. Our proposal is based on the concept of an over-determined interferometric setup where a reference length is derived from a mechanical frame made from a material with a very low thermal coefficient. The technique allows one to track the variations of the refractive index of air on-line directly in the line of the measuring beam and to compensate for the fluctuations. The optical setup consists of three interferometers sharing the same beam path where two measure differentially the displacement while the third evaluates the changes in the measuring range, acting as a tracking refractometer. The principle is demonstrated in an experimental setup.

  15. Correction of group refraction index based on pulse trains interference

    Science.gov (United States)

    Wei, Dong; Aketagawa, Masato

    2015-02-01

    We propose a new concept for an unconventional type of two-color method for interferometry-based length measurements based on the adjacent pulse repetition interval length (APRIL), which is the physical length associated with the pulse repetition period. We demonstrate by numerical simulations that if the wavelength-based two-color method can eliminate the inhomogeneous disturbance of effects caused by the phase refractive index, then the APRIL-based two-color method can eliminate the air turbulence of errors induced by the group refractive index. We show that our analysis will benefit the pulse-laser-based two-color method, which secures traceability to the definition of the meter.

  16. Optofluidic refractive index sensor based on partial reflection

    Science.gov (United States)

    Zhang, Lei; Zhang, Zhang; Wang, Yichuan; Ye, Meiying; Fang, Wei; Tong, Limin

    2017-06-01

    We demonstrate a novel optofluidic refractive index (RI) sensor with high sensitivity and wide dynamic range based on partial reflection. Benefited from the divergent incident light and the output fibers with different tilting angles, we have achieved highly sensitive RI sensing in a wide range from 1.33 to 1.37. To investigate the effectiveness of this sensor, we perform a measurement of RI with a resolution of ca. 5.0×10-5 refractive index unit (RIU) for ethylene glycol solutions. Also, we have measured a series of liquid solutions by using different output fibers, achieving a resolution of ca. 0.52 mg/mL for cane surge. The optofluidic RI sensor takes advantage of the high sensitivity, wide dynamic range, small footprint, and low sample consumption, as well as the efficient fluidic sample delivery, making it useful for applications in the food industry.

  17. A surface refractive index scanning system and method

    DEFF Research Database (Denmark)

    2015-01-01

    The invention relates to a surface refractive index scanning system for characterization of a sample. The system comprises a grating device for holding or receiving the sample, the device comprising at least a first grating region having a first grating width along a transverse direction, and a s......The invention relates to a surface refractive index scanning system for characterization of a sample. The system comprises a grating device for holding or receiving the sample, the device comprising at least a first grating region having a first grating width along a transverse direction...... a grating period Λ2 in the longitudinal direction, where the longitudinal direction is orthogonal to the transverse direction. A grating period spacing ΔΛ = Λ1 - Λ2 is finite. Further, the first and second grating periods are chosen to provide optical resonances for light respectively in a first...

  18. Fiber Optic-Based Refractive Index Sensing at INESC Porto

    Science.gov (United States)

    Jorge, Pedro A. S.; Silva, Susana O.; Gouveia, Carlos; Tafulo, Paula; Coelho, Luis; Caldas, Paulo; Viegas, Diana; Rego, Gaspar; Baptista, José M.; Santos, José L.; Frazão, Orlando

    2012-01-01

    A review of refractive index measurement based on different types of optical fiber sensor configurations and techniques is presented. It addresses the main developments in the area, with particular focus on results obtained at INESC Porto, Portugal. The optical fiber sensing structures studied include those based on Bragg and long period gratings, on micro-interferometers, on plasmonic effects in fibers and on multimode interference in a large spectrum of standard and microstructured optical fibers. PMID:22969405

  19. A RICH with aerogel: a study of refractive index uniformity

    CERN Document Server

    Alemi, M; Calvi, M; Matteuzzi, C; Musy, M; Perego, D L; Easo, S

    2004-01-01

    The use of aerogel as a radiator in the RICH detectors of LHCb is a challenge due to the hot environment of the hadron collider LHC. Large size tiles of silica aerogel were recently produced with unprecedented optical quality for such dimensions. Results of laboratory measurements and beam tests are briefly reported. A description of a method to measure the uniformity of the index of refraction within the tile is given.

  20. Measurement of the Kerr nonlinear refractive index of Cs vapor

    CERN Document Server

    Araújo, Michelle O; Oriá, Marcos; Chevrollier, Martine; de Silans, Thierry Passerat; Castro, Romeu; Moretti, Danieverton

    2014-01-01

    Atomic vapors are systems well suited for nonlinear optics studies but very few direct measurements of their nonlinear refractive index have been reported. Here we use the z-scan technique to measure the Kerr coefficient, $n_2$, for a Cs vapor. Our results are analyzed through a four-level model, and we show that coherence between excited levels as well as cross-population effects contribute to the Kerr-nonlinearity.

  1. Directly patternable high refractive index ferroelectric sol–gel resist

    Energy Technology Data Exchange (ETDEWEB)

    Garoli, D., E-mail: denis.garoli@iit.it [Istituto Italiano di Tecnologia, Via Morego 16, 16136 Genova (Italy); Della Giustina, G. [Industrial Engineering Department, University of Padova and INSTM, Via Marzolo 9, 35131 Padova (Italy)

    2015-08-15

    The development of a ferroelectric negative tone sol–gel resist for Ultraviolet (UV) and Electron Beam (EB) lithography is presented. A new system based on Lead Zirconate Titanate (PZT, with formula PbZr{sub 0.52}Ti{sub 0.48}O{sub 3}) was synthesized by sol–gel method. The lithographic performances were investigated and several structures spanning from the micron range down to less than 50 nm have been achieved by UV and EB lithography. The system interaction with UV light and Electron beam was thoroughly characterized by FT-IT spectroscopy. The exposed PZT was annealed at high temperatures in order to study the crystalline phase evolution, the optical constants values and stability of patterned structures. After exposure and annealing, the refractive index of the material can vary from 1.68 up to 2.33 (@400 nm), while the ferroelectric behaviour seems to be maintained after high temperature annealing. These results suggest a possible application of PZT resist not only as ferroelectric but also as nanopatternable high refractive index material. Moreover, direct nanopatterning by means of Focused Ion Beam (FIB) lithography was verified and the potentiality for the preparation of high aspect ratio hollow nanostructures will be presented. - Highlights: • A new formula directly patternable PZT high refractive index resist is presented. • The gel is sensitive to both UV and electron beam exposure. • The refractive index can vary from 1.68 up to 2.33 (@400 nm). • Direct nanopatterning by means of Focused Ion Beam (FIB) lithography was verified. • High aspect ratio hollow nanostructures will be presented.

  2. Ultrafast refractive index control of a terahertz graphene metamaterial.

    Science.gov (United States)

    Lee, Seung Hoon; Choi, Jeongmook; Kim, Hyeon-Don; Choi, Hyunyong; Min, Bumki

    2013-01-01

    Modulation of the refractive index of materials is elementary, yet it is crucial for the manipulation of electromagnetic waves. Relying on the inherent properties of natural materials, it has been a long-standing challenge in device engineering to increase the index-modulation contrast. Here, we demonstrate a significant amount of ultrafast index modulation by optically exciting non-equilibrium Dirac fermions in the graphene layer integrated onto a high-index metamaterial. Furthermore, an extremely-large electrical modulation of refractive index up to Δn ~ -3.4 (at 0.69 THz) is achieved by electrical tuning of the density of the equilibrium Dirac fermion in the graphene metamaterial. This manifestation, otherwise remaining elusive in conventional semiconductor devices, fully exploits the characteristic ultrafast charge relaxation in graphene as well as the strong capacitive response of the metamaterial, both of which enable us to drastically increase the light-matter interaction of graphene and the corresponding index contrast in the graphene metamaterials.

  3. Origami with negative refractive index to generate super-lenses.

    Science.gov (United States)

    Guenneau, Fanny; Chakrabarti, Sangeeta; Guenneau, Sebastien; Ramakrishna, S Anantha

    2014-10-08

    Negative refractive index materials (NRIM) enable unique effects including superlenses with a high degree of sub-wavelength image resolution, a capability that stems from the ability of NRIM to support a host of surface plasmon states. Using a generalized lens theorem and the powerful tools of transformational optics, a variety of focusing configurations involving complementary positive and negative refractive index media can be generated. A paradigm of such complementary media are checkerboards that consist of alternating cells of positive and negative refractive index, and are associated with very singular electromagnetics. We present here a variety of multi-scale checkerboard lenses that we call origami lenses and investigate their electromagnetic properties both theoretically and computationally. Some of these meta-structures in the plane display thin bridges of complementary media, and this highly enhances their plasmonic response. We demonstrate the design of three-dimensional checkerboard meta-structures of complementary media using transformational optics to map the checkerboard onto three-dimensional corner lenses, the only restriction being that the corresponding unfolded structures in the plane are constrained by the four color-map theorem.

  4. A new iterative algorithm to reconstruct the refractive index.

    Science.gov (United States)

    Liu, Y J; Zhu, P P; Chen, B; Wang, J Y; Yuan, Q X; Huang, W X; Shu, H; Li, E R; Liu, X S; Zhang, K; Ming, H; Wu, Z Y

    2007-06-21

    The latest developments in x-ray imaging are associated with techniques based on the phase contrast. However, the image reconstruction procedures demand significant improvements of the traditional methods, and/or new algorithms have to be introduced to take advantage of the high contrast and sensitivity of the new experimental techniques. In this letter, an improved iterative reconstruction algorithm based on the maximum likelihood expectation maximization technique is presented and discussed in order to reconstruct the distribution of the refractive index from data collected by an analyzer-based imaging setup. The technique considered probes the partial derivative of the refractive index with respect to an axis lying in the meridional plane and perpendicular to the propagation direction. Computer simulations confirm the reliability of the proposed algorithm. In addition, the comparison between an analytical reconstruction algorithm and the iterative method has been also discussed together with the convergent characteristic of this latter algorithm. Finally, we will show how the proposed algorithm may be applied to reconstruct the distribution of the refractive index of an epoxy cylinder containing small air bubbles of about 300 micro of diameter.

  5. 3D refractive index measurements of special optical fibers

    Science.gov (United States)

    Yan, Cheng; Huang, Su-Juan; Miao, Zhuang; Chang, Zheng; Zeng, Jun-Zhang; Wang, Ting-Yun

    2016-09-01

    A digital holographic microscopic chromatography-based approach with considerably improved accuracy, simplified configuration and performance stability is proposed to measure three dimensional refractive index of special optical fibers. Based on the approach, a measurement system is established incorporating a modified Mach-Zehnder interferometer and lab-developed supporting software for data processing. In the system, a phase projection distribution of an optical fiber is utilized to obtain an optimal digital hologram recorded by a CCD, and then an angular spectrum theory-based algorithm is adopted to extract the phase distribution information of an object wave. The rotation of the optic fiber enables the experimental measurements of multi-angle phase information. Based on the filtered back projection algorithm, a 3D refraction index of the optical fiber is thus obtained at high accuracy. To evaluate the proposed approach, both PANDA fibers and special elliptical optical fiber are considered in the system. The results measured in PANDA fibers agree well with those measured using S14 Refractive Index Profiler, which is, however, not suitable for measuring the property of a special elliptical fiber.

  6. Two-dimensional refractive index and stresses profiles of a homogenous bent optical fiber.

    Science.gov (United States)

    Ramadan, W A; Wahba, H H; Shams El-Din, M A

    2014-11-01

    We present a significant contribution to the theory of determining the refractive index profile of a bent homogenous optical fiber. In this theory we consider two different processes controlling the index profile variations. The first is the linear index variation due to stress along the bent radius, and the second is the release of this stress on the fiber surface. This release process is considered to have radial dependence on the fiber radius. These considerations enable us to construct the index profile in two dimensions normal to the optical axis, considering the refraction of light rays traversing the fiber. This theory is applied to optical homogenous bent fiber with two bending radii when they are located orthogonal to the light path of the object arm in the holographic setup (like the Mach-Zehnder interferometer). Digital holographic phase shifting interferometry is employed in this study. The recorded phase shifted holograms have been combined, reconstructed, and processed to extract the phase map of the bent optical fiber. A comparison between the extracted optical phase differences and the calculated one indicates that the refractive index profile variation should include the above mentioned two processes, which are considered as a response for stress distribution across the fiber's cross section. The experimentally obtained refractive index profiles provide the stress induced birefringence profile. Thus we are able to present a realistic induced stress profile due to bending.

  7. Optofluidic refractive-index sensor in step-index fiber with parallel hollow micro-channel.

    Science.gov (United States)

    Lee, H W; Schmidt, M A; Uebel, P; Tyagi, H; Joly, N Y; Scharrer, M; Russell, P St J

    2011-04-25

    We present a simple refractive index sensor based on a step-index fiber with a hollow micro-channel running parallel to its core. This channel becomes waveguiding when filled with a liquid of index greater than silica, causing sharp dips to appear in the transmission spectrum at wavelengths where the glass-core mode phase-matches to a mode of the liquid-core. The sensitivity of the dip-wavelengths to changes in liquid refractive index is quantified and the results used to study the dynamic flow characteristics of fluids in narrow channels. Potential applications of this fiber microstructure include measuring the optical properties of liquids, refractive index sensing, biophotonics and studies of fluid dynamics on the nanoscale.

  8. Interference Imaging of Refractive Index Distribution in Thin Samples

    Directory of Open Access Journals (Sweden)

    Norbert Tarjanyi

    2004-01-01

    Full Text Available There are three versions of interference imaging of refractive index distribution in thin samples suggested in this contribution. These are based on imaging of interference field created by waves reflected from the front and the back sample surface or imaging of interference field of Michelson or Mach-Zehnder interferometer with the sample put in one of the interferometers arm. The work discusses the advantages and disadvantages of these techniques and presents the results of imaging of refrective index distribution in photorefractive record of a quasi-harmonic optical field in thin LiNbO3 crystal sample.

  9. Polymeric nanolayered gradient refractive index lenses: technology review and introduction of spherical gradient refractive index ball lenses

    Science.gov (United States)

    Ji, Shanzuo; Yin, Kezhen; Mackey, Matthew; Brister, Aaron; Ponting, Michael; Baer, Eric

    2013-11-01

    A nanolayered polymer films approach to designing and fabricating gradient refractive index (GRIN) lenses with designer refractive index distribution profiles and an independently prescribed lens surface geometry have been demonstrated to produce a new class of optics. This approach utilized nanolayered polymer materials, constructed with polymethylmethacrylate and a styrene-co-acrylonitrile copolymer with a tailorable refractive index intermediate to bulk materials, to fabricate discrete GRIN profile materials. A process to fabricate nanolayered polymer GRIN optics from these materials through thermoforming and finishing steps is reviewed. A collection of technology-demonstrating previously reported nanolayered GRIN case studies is presented that include: (1) the optical performance of a f/# 2.25 spherical GRIN plano-convex singlet with one quarter (2) the weight of a similar BK7 lens and a bio-inspired aspheric human eye GRIN lens. Original research on the fabrication and characterization of a Luneburg inspired GRIN ball lens is presented as a developing application of the nanolayered polymer technology.

  10. Effect of Index of Refraction on Radiation Characteristics in a Heated Absorbing, Emitting, and Scattering Layer

    Science.gov (United States)

    Siegel, R.; Spuckler, C. M.

    1992-01-01

    The index of refraction can considerably influence the temperature distribution and radiative heat flow in semitransparent materials such as some ceramics. For external radiant heating, the refractive index influences the amount of energy transmitted into the interior of the material. Emission within a material depends on the square of its refractive index, and hence this emission can be many times that for a biackbody radiating into a vacuum. Since radiation exiting through an interface into a vacuum cannot exceed that of a blackbody, there is extensive reflection at the internal surface of an interface, mostly by total internal reflection. This redistributes energy within the layer and tends to make its temperature distribution more uniform. The purpose of the present analysis is to show that, for radiative equilibrium in a gray layer with diffuse interfaces, the temperature distribution and radiative heat flux for any index of refraction can be obtained very simply from the results for an index of refraction of unity. For the situation studied here, the layer is subjected to external radiative heating incident on each of its surfaces. The material emits, absorbs, and isotropically scatters radiation. For simplicity the index of refraction is unity in the medium surrounding the layer. The surfaces of the layer are assumed diffuse. This is probably a reasonable approximation for a ceramic layer that has not been polished. When transmitted radiation or radiation emitted from the interior reaches the inner surface of an interface, the radiation is diffused and some of it thereby placed into angular directions for which there is total internal reflection. This provides a trapping effect for retaining energy within the layer and tends to equalize its temperature distribution. An analysis of temperature distributions in absorbing-emitting layers, including index of refraction effects, was developed by Gardon (1958) to predict cooling and heat treating of glass plates

  11. Imaging based refractometer for hyperspectral refractive index detection

    Energy Technology Data Exchange (ETDEWEB)

    Baba, Justin S.; Boudreaux, Philip R.

    2015-11-24

    Refractometers for simultaneously measuring refractive index of a sample over a range of wavelengths of light include dispersive and focusing optical systems. An optical beam including the range of wavelengths is spectrally spread along a first axis and focused along a second axis so as to be incident to an interface between the sample and a prism at a range of angles of incidence including a critical angle for at least one wavelength. An imaging detector is situated to receive the spectrally spread and focused light from the interface and form an image corresponding to angle of incidence as a function of wavelength. One or more critical angles are identified and corresponding refractive indices are determined.

  12. Chiral Swiss rolls show a negative refractive index.

    Science.gov (United States)

    Wiltshire, M C K; Pendry, J B; Hajnal, J V

    2009-07-22

    Chiral Swiss rolls, consisting of a metal/dielectric laminate tape helically wound on an insulating mandrel, have been developed to form the basis of a highly chiral metamaterial. We have fabricated these elements using a custom-built machine, and have characterized them. We find that the permeability, permittivity, and chirality are all resonant in the region of 80 MHz. The chirality is so strong that it can be directly measured by observing the magnetic response to an applied electric field, and is larger than either the permeability or the permittivity. We have estimated the refractive indices from these data, and find both strong circular dichroism and a wide frequency range where the refractive index is negative.

  13. Tuning the number of plasmon band in silver ellipsoidal nanoshell: refractive index sensing based on plasmon blending and splitting

    Science.gov (United States)

    Jian, Zhu; Xing-chun, Deng; Jian-jun, Li; Jun-wu, Zhao

    2011-03-01

    Because of the geometric features of both rod and shell, dielectric-silver core-shell ellipsoidal nanostructure with 12-40 nm semi-major axis may bring forth four surface plasmon resonance (SPR) absorption peaks at most. Theoretical calculations based on quasi-static approximation show that there is surrounding refractive index-dependent plasmon blending and splitting in the absorption spectra, which makes the number of plasmon band of the silver ellipsoidal nanoshell is tunable. The sensitivity of the plasmon blending and splitting to the surrounding refractive index may be improved by increasing the shell thickness, aspect ratio or core refractive index. This local refractive index dependent-plasmon blending and splitting presents a new sensing picture based on tuning the number of SPR absorption peaks.

  14. Ultraviolet light induced refractive index structures in germanosilica

    Science.gov (United States)

    Svalgaard, M.

    1997-03-01

    The focus of the research presented in this ph.d. thesis is refractive index structures photoinduced in germanonsilica waveguides with ultra-violet (UV) radiation. The physical mechanisms involved in photosensitivity and applications of a wide range of UV induced refractive index structures in both optical fibers and planar wavguides have been explored. This work includes fabrication of fiber Bragg gratings and design of equipment intended for enhancement of photosensitivity by indiffusion of molecular hydrogen. New insight regarding UV induced reactions in germanosilica has been provided through application of a scanning near-field optical microscope to obtain high resolution images of UV induced refractive index structures and by monitoring the dynamics of UV induced index changes and luminescence. During part of my ph.d. project I have worked at the National Institute of Standards and Technolgy in Colorado (USA) under supervision of Dr. Sarah L. Gilbert, fabricating and characterizing erbium doped fiber lasers incorporating UV written Bragg gratings. Due to their compact structure, such devices are shown to exhibit a frequency stability several orders of magnitude better than lasers incorporating bulk optics. Finally, I have developed a new method for direct UV writing of planar waveguide devices using a focussed continuous wave UV laser beam which is scanned across a photosensitive thin film deposited on a silicon wafer. Contrary to other waveguide fabrication techniques this method requires no additional wafer processing. By demonstrating a wide variety of integrated devices it is shown that the performance of this method in terms of waveguide loss, flexibility and fabrication yield rivals or surpasses that currently obtainable with other more elaborate techniques.

  15. CO2 laser induced refractive index changes in optical polymers.

    Science.gov (United States)

    Liu, Qing; Chiang, Kin Seng; Reekie, Laurence; Chow, Yuk Tak

    2012-01-01

    We study the infrared photosensitivity properties of two optical polymer materials, benzocyclobutene (BCB) and epoxy OPTOCAST 3505, with a 10.6 μm CO2 laser. We discover that the CO2 laser radiation can lower the refractive index of BCB by as much as 5.5 × 10(-3), while inducing no measurable index change in the epoxy. As confirmed by Fourier transform infrared spectroscopy, the observed index change in BCB can be attributed to photothermal modification of chemical bonds in the material by the CO2 laser radiation. Our findings open up a new possibility of processing polymer materials with a CO2 laser, which could be further developed for application in the areas of post-processing and direct-writing of polymer waveguide devices.

  16. Strip Waveguide Directional Coupling Modulator with Equivalent Refractive Index

    Institute of Scientific and Technical Information of China (English)

    LI Hong-tao; HE Dui-yan

    2004-01-01

    The equivalent refractive index(ERI) method is employed to analyze the function of the strip waveguide directional coupling modulator(SWM). Through deducing the diagnostic equation of the Exmn mode of the four-layer media film waveguide equivalent to the SWM,the transmission constant of the symmetrical mode of the positive phase and negative one and the coupling length of powerful transference are obtained. The veracity of ERI is validated with the example of Ex11 basal mode under the condition of comparing the three results of ERI,EIM and Marcatili.

  17. Negative refractive index induced by percolation in disordered metamaterials

    CERN Document Server

    Slovick, Brian A

    2016-01-01

    An effective medium model is developed for disordered metamaterials containing a spatially random distribution of dielectric spheres. Similar to effective medium models for ordered metamaterials, this model predicts resonances in the effective permeability and permittivity arising from electric- and magnetic-dipole Mie resonances in the spheres. In addition, the model predicts a redshift of the electric resonance with increasing particle loading. Interestingly, when the particle loading exceeds the percolation threshold of 33\\%, the model predicts that the electric resonance overlaps with the magnetic resonance, resulting in a negative refractive index.

  18. Negative refractive index induced by percolation in disordered metamaterials

    Science.gov (United States)

    Slovick, Brian A.

    2017-03-01

    An effective medium model is developed for disordered metamaterials containing a spatially random distribution of dielectric spheres. Similar to effective medium models for ordered metamaterials, this model predicts resonances in the effective permeability and permittivity arising from electric- and magnetic-dipole Mie resonances in the spheres. In addition, the model predicts a redshift of the electric resonance with increasing particle loading. Interestingly, when the particle loading exceeds the percolation threshold of 33%, the model predicts that the electric resonance overlaps with the magnetic resonance, resulting in a negative refractive index.

  19. Science Letters: Lattice type transmission line of negative refractive index

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    In this letter, we introduce a novel passive transmission line of negative refractive index (i.e., left-handedness) based on identical symmetrical lattice type structures [thus called "lattice type transmission line" (LT-TL)]. The dispersion characteristic and the transmission response of the proposed LT-TL are analyzed. While all the other left-handed passive transmission lines are of high pass, the present passive left-handed transmission line is of low pass. Compared with a conventional transmission line, the LT-TL has a phase shift of 180° in the entire wide pass-band.

  20. Refractive Index of Humid Air in the Infrared: Model Fits

    CERN Document Server

    Mathar, R J

    2006-01-01

    The theory of summation of electromagnetic line transitions is used to tabulate the Taylor expansion of the refractive index of humid air over the basic independent parameters (temperature, pressure, humidity, wavelength) in five separate infrared regions from the H to the Q band at a fixed percentage of Carbon Dioxide. These are least-squares fits to raw, highly resolved spectra for a set of temperatures from 10 to 25 C, a set of pressures from 500 to 1023 hPa, and a set of relative humidities from 5 to 60%. These choices reflect the prospective application to characterize ambient air at mountain altitudes of astronomical telescopes.

  1. Omnidirectional Photonic Band Gap Using Low Refractive Index Contrast Materials and its Application in Optical Waveguides

    KAUST Repository

    Vidal Faez, Angelo

    2012-07-01

    Researchers have argued for many years that one of the conditions for omnidirectional reflection in a one-dimensional photonic crystal is a strong refractive index contrast between the two constituent dielectric materials. Using numerical simulations and the theory of Anderson localization of light, in this work we demonstrate that an omnidirectional band gap can indeed be created utilizing low refractive index contrast materials when they are arranged in a disordered manner. Moreover, the size of the omnidirectional band gap becomes a controllable parameter, which now depends on the number of layers and not only on the refractive index contrast of the system, as it is widely accepted. This achievement constitutes a major breakthrough in the field since it allows for the development of cheaper and more efficient technologies. Of particular interest is the case of high index contrast one-dimensional photonic crystal fibers, where the propagation losses are mainly due to increased optical scattering from sidewall roughness at the interfaces of high index contrast materials. By using low index contrast materials these losses can be reduced dramatically, while maintaining the confinement capability of the waveguide. This is just one of many applications that could be proven useful for this discovery.

  2. Refractive-index changes in lithium niobate crystals by radiation damages; Brechungsindexaenderungen in Lithiumniobat-Kristallen durch Strahlenschaeden

    Energy Technology Data Exchange (ETDEWEB)

    Zamani Meymian, Mohammad Reza

    2007-12-18

    For the study in this thesis {sup 3}He{sup 2+} ions with the energy of about 40 MeV were applied. The results of these studies show a timely very stable anisotrope refractive-index change in the range of some 10{sup -3}. The radiation damages caused by ions cause a decreasement of the ordinary refractive index n{sub o} and an increasement of the extra-ordinary refractive index n{sub e}. While the absolute values for {delta}n{sub o} and {delta}n{sub e} are nearly equal the birefringence of the material (n{sub e}-n{sub o}) smaller. The generated refractive-index change is dose dependent and the curve {delta}n has at increasing dose a strongly nonlinear slope with a characteristic stage at the radiation dose of about 2 x 10{sup 20} ions/m{sup 2}.

  3. X-ray refractive index of laser-dressed atoms

    CERN Document Server

    Buth, Christian

    2008-01-01

    We investigated the complex index of refraction in the x-ray regime of atoms in laser light. The laser (intensity up to 10^13 W/cm^2, 800nm) modifies the atomic states but, by assumption, does not excite or ionize the atoms in their electronic ground state. Using quantum electrodynamics, we devise an ab initio theory to calculate the dynamic dipole polarizability and the photoabsorption cross section, which are subsequently used to determine the real and imaginary part, respectively, of the refractive index. The interaction with the laser is treated nonperturbatively; the x-ray interaction is described in terms of a one-photon process. We numerically solve the resolvents involved using a single-vector Lanczos algorithm. Finally, we formulate rate equations to copropagate a laser and an x-ray pulse through a gas cell. Our theory is applied to argon. We study the x-ray polarizability and absorption near the argon K edge over a large range of dressing-laser intensities. We find electromagnetically induced transp...

  4. High-refractive-index measurement with an elastomeric grating coupler

    Science.gov (United States)

    Kocabas, Askin; Ay, Feridun; Dâna, Aykutlu; Kiyat, Isa; Aydinli, Atilla

    2005-12-01

    An elastomeric grating coupler fabricated by the replica molding technique is used to measure the modal indices of a silicon-on-insulator (SOI) planar waveguide structure. Because of the van der Waals interaction between the grating mold and the waveguide, the elastomeric stamp makes conformal contact with the waveguide surface, inducing a periodic index perturbation at the contact region. The phase of the incident light is changed to match the guided modes of the waveguide. The modal and bulk indices are obtained by measuring the coupling angles. This technique serves to measure the high refractive index with a precision better than 10-3 and allows the elastomeric stamp to be removed without damaging the surface of the waveguide.

  5. Simultaneous temperature and refractive index measurement of liquid using a local micro-structured fiber Bragg grating

    Institute of Scientific and Technical Information of China (English)

    Ye Cao; Yinfei Yang; Xiufeng Yang; Zhengrong Tong

    2012-01-01

    An alternative solution for the simultaneous measurement of temperature and refractive index is presented. A local micro-structured fiber Bragg grating (LMSFBG) is formed as the sensing head, in which a standard grating is etched by HF. According to the phase shift theory, the main spectral change of the LMSFBG is the formation of a narrow allowed band, which is strongly dependent on the etching features and the surrounding refractive index. As such, the temperature and refractive index measurements can be achieved by the shifts of the double peaks and narrow allowed band, and their fitting linearity coefficients are 0.996 and 0.994, respectively. Thus, the reflection and transmission peaks of the LMSFBG have a good linear relationship with temperature and refractive index.%An alternative solution for the simultaneous measurement of temperature and refractive index is presented.A local micro-structured fiber Bragg grating (LMSFBG) is formed as the sensing head,in which a standard grating is etched by HF.According to the phase shift theory,the main spectral change of the LMSFBG is the formation of a narrow allowed band,which is strongly dependent on the etching features and the surrounding refractive index.As such,the temperature and refractive index measurements can be achieved by the shifts of the double peaks and narrow allowed band,and their fitting linearity coefficients are 0.996 and 0.994,respectively.Thus,the reflection and transmission peaks of the LMSFBG have a good linear relationship with temperature and refractive index.

  6. Refractive Index Sensing with D-Shaped Plastic Optical Fibers for Chemical and Biochemical Applications.

    Science.gov (United States)

    Sequeira, Filipa; Duarte, Daniel; Bilro, Lúcia; Rudnitskaya, Alisa; Pesavento, Maria; Zeni, Luigi; Cennamo, Nunzio

    2016-12-13

    We report the optimization of the length of a D-shaped plastic optical fiber (POF) sensor for refractive index (RI) sensing from a numerical and experimental point of view. The sensing principle is based on total internal reflection (TIR). POFs with 1 mm in diameter were embedded in grooves, realized in planar supports with different lengths, and polished to remove the cladding and part of the core. All D-shaped POF sensors were tested using aqueous medium with different refractive indices (from 1.332 to 1.471) through intensity-based configuration. Results showed two different responses. Considering the refractive index (RI) range (1.33-1.39), the sensitivity and the resolution of the sensor were strongly dependent on the sensing region length. The highest sensitivity (resolution of 6.48 × 10(-3) refractive index units, RIU) was obtained with 6 cm sensing length. In the RI range (1.41-1.47), the length of the sensing region was not a critical aspect to obtain the best resolution. These results enable the application of this optical platform for chemical and biochemical evanescent field sensing. The sensor production procedure is very simple, fast, and low-cost.

  7. SHORT COMMUNICATION: Verification of Revised Water Vapour Correction to the Index of Refraction of Air

    Science.gov (United States)

    Beers, J.; Doiron, T.

    1992-01-01

    The Edlén equation has become the standard method of relating the index of refraction of air to the air temperature, pressure and humidity. The recent suggestion for improvements in the humidity dependence by Birch and Downs has been verified at the 0,633 μm He-Ne laser wavelength using the line scale interferometer at the National Institute of Standards and Technology (NIST).

  8. Nondestructive measurement of two-dimensional refractive index profiles by deflectometry

    Science.gov (United States)

    Lin, Di; Leger, James R.

    2015-06-01

    We present a method for calculating a two-dimensional refractive index field from measured boundary values of beam position and slope. By initially ignoring the dependence of beam trajectories on the index field and using cubic polynomials to approximate these trajectories, we show that the inverse problem can be reduced to set of linear algebraic equations and solved using a numerical algorithm suited for inverting sparse, ill-conditioned linear systems. The beam trajectories are subsequently corrected using an iterative ray trace procedure so that they are consistent with the ray equation inside the calculated index field. We demonstrate the efficacy of our method through computer simulation, where a hypothetical test index field is reconstructed on a 15 × 15 discrete grid using 800 interrogating rays and refractive index errors (RMS) less than 0.5% of the total index range (nmax-nmin) are achieved. In the subsequent error analysis, we identify three primary sources of error contributing to the reconstruction of the index field and assess the importance of data redundancy. The principles developed in our approach are fully extendable to three-dimensional index fields as well as more complex geometries.

  9. The Refractive Index of Silicon at Gamma Ray Energies

    CERN Document Server

    Habs, D; Jentschel, M; Urban, W

    2011-01-01

    The index of refraction n(E_{\\gamma})=1+\\delta(E_{\\gamma})+i\\beta(E_{\\gamma}) is split into a real part \\delta and an absorptive part \\beta. The absorptive part has the three well-known contributions to the cross section \\sigma_{abs}: the photo effect, the Compton effect and the pair creation, but there is also the inelastic Delbr\\"uck scattering. Second-order elastic scattering cross sections \\sigma_{sca} with Rayleigh scattering (virtual photo effect), virtual Compton effect and Delbr\\"uck scattering (virtual pair creation) can be calculated by integrals of the Kramers-Kronig dispersion relations from the cross section \\sigma_{abs}. The real elastic scattering amplitudes are proportional to the refractive indices \\delta_{photo}, \\delta_{Compton} and \\delta_{pair}. While for X-rays the negative \\delta_{photo} dominates, we show for the first time experimentally and theoretically that the positive \\delta_{pair} dominates for \\gamma rays, opening a new era of \\gamma optics applications, i.e. of nuclear photoni...

  10. Radiation pressure cross sections and optical forces over negative refractive index spherical particles by ordinary Bessel beams.

    Science.gov (United States)

    Ambrosio, Leonardo A; Hernández-Figueroa, Hugo E

    2011-08-01

    When impinged by an arbitrary laser beam, lossless and homogeneous negative refractive index (NRI) spherical particles refract and reflect light in an unusual way, giving rise to different scattered and internal fields when compared to their equivalent positive refractive index particles. In the generalized Lorenz-Mie theory, the scattered fields are dependent upon the Mie scattering coefficients, whose values must reflect the metamaterial behavior of an NRI scatterer, thus leading to new optical properties such as force and torque. In this way, this work is devoted to the analysis of both radial and longitudinal optical forces exerted on lossless and simple NRI particles by zero-order Bessel beams, revealing how the force profiles are changed whenever the refractive index becomes negative.

  11. Interferometric investigation and simulation of refractive index in glass matrixes containing nanoparticles of varying sizes

    Energy Technology Data Exchange (ETDEWEB)

    Feeney, Michael Gerard; Ince, Rabia; Yukselici, Mehmet Hikmet; Allahverdi, Cagdas

    2011-07-01

    The relationship between refractive index and nanoparticle radii of cadmium selenide (CdSe) nanoparticles embedded within glass matrixes was investigated experimentally and by simulations. A homemade automated Michelson interferometer arrangement employing a rotating table and a He-Ne laser source at a wavelength of 632.8 nm determined the refractive index versus nanoparticle radii of embedded cadmium selenide (CdSe) nanoparticles. The refractive index was found to decrease linearly with nanoparticle radius increase. However, one sample showed a step increase in refractive index; on spectroscopic analysis, it was found that its resonant wavelength matched that of the He-Ne source wavelength. The simulations showed that two conditions caused the step increase in refractive index: low plasma frequency and matched sample and source resonances. This simple interferometer setup defines a new method of determining the radii of nanoparticles embedded in substrates and enables refractive index tailoring by modification of exact annealing conditions.

  12. Refractive index insensitive temperature sensor based on waist-enlarged few mode fiber bitapers

    Science.gov (United States)

    Liu, Qiang; Wang, Si-wen; Fu, Xing-hu; Fu, Guang-wei; Jin, Wa; Bi, Wei-hong

    2017-01-01

    A refractive index insensitive temperature sensor based on waist-enlarged few mode fiber (FMF) bitapers is presented. The first section of FMF is spliced between two single-mode fibers. In fusion process, the waist-enlarged FMF bitapers can be obtained by large current discharging repeatedly. The refractive index and temperature sensing mechanisms are analyzed. For the sensors with different sizes, the refractive index and temperature experiments have been performed. The results show that in the refractive index ranges of 1.335 0—1.346 6 and 1.348 2—1.419 3, the refractive index insensitivity is verified. In a temperature range of 31.9—90 °C, the sensor sensitivity can be up to 85.57 pm/°C. In addition, it has a compact structure. Therefore, the sensor can avoid the cross sensitivity for measuring the refractive index and temperature simultaneously.

  13. Using aircraft measurements to determine the refractive index of Saharan dust during the DODO Experiments

    Directory of Open Access Journals (Sweden)

    C. L. McConnell

    2010-03-01

    Full Text Available Much uncertainty in the value of the imaginary part of the refractive index of mineral dust contributes to uncertainty in the radiative effect of mineral dust in the atmosphere. A synthesis of optical, chemical and physical in-situ aircraft measurements from the DODO experiments during February and August 2006 are used to calculate the refractive index mineral dust encountered over West Africa. Radiative transfer modeling and measurements of broadband shortwave irradiance at a range of altitudes are used to test and validate these calculations for a specific dust event on 23 August 2006 over Mauritania. Two techniques are used to determine the refractive index: firstly a method combining measurements of scattering, absorption, size distributions and Mie code simulations, and secondly a method using composition measured on filter samples to apportion the content of internally mixed quartz, calcite and iron oxide-clay aggregates, where the iron oxide is represented by either hematite or goethite and clay by either illite or kaolinite. The imaginary part of the refractive index at 550 nm (ni550 is found to range between 0.0001 i to 0.0046 i, and where filter samples are available, agreement between methods is found depending on mineral combination assumed. The refractive indices are also found to agree well with AERONET data where comparisons are possible. ni550 is found to vary with dust source, which is investigated with the NAME model for each case. The relationship between both size distribution and ni550 on the accumulation mode single scattering albedo at 550 nm (ω0550 are examined and size distribution is found to have no correlation to ω0550, while ni550 shows a strong linear relationship with ω0550. Radiative transfer modeling was performed with different

  14. Complex refractive index of starch acetate used as a biodegradable pigment and filler of paper

    Science.gov (United States)

    Karvinen, Petri; Oksman, Antti; Silvennoinen, Raimo; Mikkonen, Hannu

    2007-05-01

    Complex refractive index of strongly depolarizing starch acetate is investigated as a function of bulk package density, which is compulsory parameter in analysis of light scattering from nanoscale starch acetate pigments and fillers. The measurements were made using a laser-goniometer and spectrophotometer to gain data for refractive index analysis according to the Brewster's law and Fresnel equations. The real part of refractive index was verified by microscopic immersion method.

  15. Imprinting the nanostructures on the high refractive index semiconductor glass

    Science.gov (United States)

    Silvennoinen, M.; Paivasaari, K.; Kaakkunen, J. J. J.; Tikhomirov, V. K.; Lehmuskero, A.; Vahimaa, P.; Moshchalkov, V. V.

    2011-05-01

    The centimeter range one- and two-dimensional nanostructures of 70 nm pitch have been imprinted by hot pressing with a quartz, silicon or nickel mold, at 240 °C, onto the surface of Ge 20As 20Se 14Te 46 semiconductor glass. Excellent glass stability of this glass allows multiple re-pressing of the nano-structures. With increasing the Te/Se ratio in the glass formula, the refractive index reaches a value of 3.5 with an option of free electron absorption at elevated temperatures pointing out the use of such nanostructures in submicron and micron scale electronic devices/chips, moth eye structures and photonic crystals.

  16. Near-Zero-Refractive-Index Structure at Optical Frequencies

    Directory of Open Access Journals (Sweden)

    Hassan S. Ashour

    2013-01-01

    Full Text Available We have used a new class of left-handed materials, which uses 3D nanospheres distributed in loops in the dielectric host material. These 3D nanospheres loops give rise to negative effective permeability and permeability at Terahertz (optical frequencies. The modal dispersion relation for Terahertz TE surface waves has been derived for a slab waveguide constructed from a dielectric material slab sandwiched between two thick layers of Terahertz left-handed material (LHM. The modal dispersion relation and the power flow were numerically solved for a given set of parameters: dielectric slab thickness, the operating frequency, mode order, and the power flow and extinction in the structure. The real part of the effective refractive index exhibits near-zero values, with small extinction coefficient values. Besides that, the power flow in the dielectric core increased with slab thickness increase and the power attenuation decreased with thickness increase.

  17. Demystifying back scatter interferometry: a sensitive refractive index detector

    DEFF Research Database (Denmark)

    Jepsen, Søren Terpager; Jørgensen, Thomas Martini; Trydal, Torleif

    2014-01-01

    BACKGROUND: Back Scatter Interferometry (BSI) is a sensitive method for detecting changes of the refractive index (RI) in small capillaries. The method was originally developed as an off-axial column detector for use in Liquid Chromatography or Capillary Electrophoresis systems, but it has been...... a set of NaCl standard solutions. RESULTS: Ray-tracing show that the basic interference pattern recorded with BSI can be fully described by two beams, one reflected from the surface of the capillary and a beam reflected from the back of the capillary wall. In accordance we find that the interferometric...... a common-path interferometer. The sensitivity of the BSI system is given by twice the inner diameter of the capillary times the wavenumber of the light source. Our results suggest that Back Scatter Interferometry does not provide a unique measurement principle for sensing biochemical bindings compared...

  18. Loop-mirror-based slot waveguide refractive index sensor

    Directory of Open Access Journals (Sweden)

    Jun-long Kou

    2012-12-01

    Full Text Available Loop mirror has been widely used in fiber optical devices and systems for it provides a smart way to make use of the fiber birefringence properties and can enhance the sensitivity greatly. On the other hand, slot waveguide is very promising for optical sensing applications because of their peculiar spatial mode profile. In this paper, we propose and analyze a loop-mirror-based slot waveguide (LMSW sensor which can be routinely fabricated in modern high-volume complementary metal-oxide–semiconductor (CMOS process. The finite element method (FEM simulation results show that the birefringence can be as high as 0.8 which is orders of magnitude than that in conventional birefringent fiber loop mirror. High sensitivity up to 6 × 103 nm/RIU (refractive index unit is achieved by this scheme.

  19. Synchrotron refractive-index microradiography of human liver cancer tissue

    Institute of Scientific and Technical Information of China (English)

    TONG Yongpeng; ZHANG Guilin; LI Yan; HWU Yeukuang; TSAI Wenli; JE Jung Ho; Margaritondo G.; YUAN Dong

    2005-01-01

    Three human liver tissue samples (~5 mm × 40 mm × 20 mm) were excised from a cancer patient's liver during surgery. The microradiology analysis was performed with a non-standard approach on a synchrotron. High-resolution refractive-index edge-enhanced microradiographs that cover a larger volume of the liver tissue sample were obtained. The cancer tissue and normal tissue could be clearly identified and distinguished based on their different textures. Furthermore, new blood vessel hyperplasia was found near the cancer area. Blood vessels with a diameter smaller than 20 μm could be identified. These findings were fully consistent with the histopathological examination of the same area. Microradiographs of the newly formed blood vessels at different angles were also obtained. This result shows that it is possible to further develop this approach into a technique of microradiographic imaging for clinic diagnosis of liver cancer at the early stage.

  20. Preparation of diarylethene copolymers and their photoinduced refractive index change

    Science.gov (United States)

    Cho, S. Y.; Yoo, M.; Shin, H.-W.; Ahn, K.-H.; Kim, Y.-R.; Kim, E.

    2003-01-01

    Diarylethene copolymers were synthesized from 1-(6 '-vinyl-2 '-methylbenzo[ b]thiophene-3 '-yl)-2-(2 ''-methylbenzo [ b]thiophene-3 ''-yl)hexafluorocyclopentene (VMBTF6) and 1-[6 '-(4 '''-vinylbenzoyl)-2 '-methylbenzo[ b]thiophene-3 '-yl]-2-(2 ''-methylbenzo[ b]thiophene-3 ''-yl)hexafluorocyclopentene (VBMBTF6) via living free radical techniques using stable TEMPO derivatives. The diarylethene content was controlled by the feed ratio of diarylethene derivatives and styrene. Transparent photochromic polymer films were prepared from the diarylethene copolymers with narrow molecular weight dispersion (PD˜1.3) by spin coating method. Photoinduced refractive index changes (Δ nTE) of the polymer films, with 25 mol% of diaryethene content, accompanied by the photochromic change were determined as 0.0009 and 0.0030 for poly(styrene- ran -VMBTF6) and poly(styrene- ran-VBMBTF6), respectively.

  1. Textile inspired flexible metamaterial with negative refractive index

    Science.gov (United States)

    Burgnies, L.; Lheurette, É.; Lippens, D.

    2015-04-01

    This work introduces metallo-dielectric woven fabric as a metamaterial for phase-front manipulation. Dispersion diagram as well as effective medium parameters retrieved from reflection and transmission coefficients point out negative values of refractive index. By numerical simulations, it is evidenced that a pair of meandered metallic wires, arranged in a top to bottom configuration, can yield to a textile metamaterial with simultaneously negative permittivity and permeability. While the effective negative permittivity stems from the metallic grid arrangement, resonating current loop resulting from the top to bottom configuration of two meandered metallic wires in near proximity produces magnetic activity with negative permeability. By adjusting the distance between pairs of metallic wires, the electric plasma frequency can be shifted to overlap the magnetic resonance. Finally, it is shown that the woven metamaterial is insensitive to the incident angle up to around 60°.

  2. Analysis of second-harmonic generation microscopy under refractive index mismatch

    Institute of Scientific and Technical Information of China (English)

    Wang Xiang-Hui; Lin Lie; Zhang Yang

    2007-01-01

    On the basis of the vector diffraction theory and Green's function method, this paper investigates the effects of refractive index mismatch on second-harmonic generation (SHG) microscopy. The polarization distribution and SHG intensity are calculated as functions of the sample radius and probe depth. The numerical results show that refractive index mismatch can result in peak intensity degradation, increase secondary lobes and extension of secondharmonic polarization distribution. Because of the attenuation of polarization intensity, the detected SHG intensity significantly decreases with increasing probe depth, which can limit the imaging depth of SHG microcopy inside thick samples. Forward SHG intensity decays slowly than backward SHG, due to the combination of extension secondharmonic polarization distribution and strong dependency of forward SHG on sample radius.

  3. Design and use of guided mode resonance filters for refractive index sensing

    DEFF Research Database (Denmark)

    Hermannsson, Pétur Gordon

    This Ph.D. thesis is concerned with the design and use of guided mode resonance filters (GMRF) for applications in refractive index sensing. GMRFs are optical nanostructures capable of efficiently and resonantly reflecting a narrow wavelength interval of incident broad band light. They combine...... a diffractive element with a waveguiding element, and it is the coupling between diffracted light and quasi guided modes that gives rise to the resonant response. The linewidth of the resonance can be tuned by the material and geometrical configuration of the device. The resonance wavelength is highly sensitive...... to changes in refractive index that occur within the region overlapped by the quasi guided mode, and GMRFs are thus well suited for optical sensing and tunable filter applications. They produce a polarization dependent response and can be optically characterized in both reflection and transmission...

  4. Infrared refractive index dispersion of PMMA spheres from synchrotron extinction spectra

    CERN Document Server

    Blümel, R; Lukacs, R; Kohler, A

    2016-01-01

    We performed high-resolution Fourier-transform infrared (FTIR) spectroscopy of a polymethyl methacrylate (PMMA) sphere of unknown size in the Mie scattering region. Apart from a slow, oscillatory structure (wiggles), which is due to an interference effect, the measured FTIR extinction spectrum exhibits a ripple structure, which is due to electromagnetic resonances. We fully characterize the underlying electromagnetic mode structure of the spectrum by assigning two mode numbers to each of the ripples in the measured spectrum. We show that analyzing the ripple structure in the spectrum in the wavenumber region from about $3000\\,$cm$^{-1}$ to $8000\\,$cm$^{-1}$ allows us to both determine the unknown radius of the sphere and the PMMA index of refraction, which shows a strong frequency dependence in this near-infrared spectral region. While in this paper we focus on examining a PMMA sphere as an example, our method of determining the refractive index and its dispersion from synchrotron infrared extinction spectra ...

  5. Study of refractive index and thickness of TiO2/ormosil planar waveguide

    Institute of Scientific and Technical Information of China (English)

    Wang Bao-Ling; Hu Li-Li

    2004-01-01

    Hybrid titania/ormosil waveguide films have been prepared by sol-gel method at low thermal treatment temperature of 150℃. The influence of processing parameters including the molar ratios of Ti(OBu)4/ glycidoxypropyltrimethoxysilane (GLYMO) and H2O/Ti(OBu)4 (expressed as R), especially aging of sol, on the refractive index and thickness of film was investigated. The optical properties of films were measured with Scanning Electron Microscope and m-line spectroscopy. The results indicate that the film thickness increases with the aging time of sol, but the variation of refractive index as a function of aging time of sol depends on the relative ratio of GLYMO to Ti-alkoxide.The relation between film thickness and corresponding sol viscosity is linear as the volume of GLYMO is 80% within the range of measured data.

  6. Omnidirectional reflector using nanoporous SiO2 as a low-refractive-index material.

    Science.gov (United States)

    Xi, J Q; Ojha, Manas; Cho, Woojin; Plawsky, J L; Gill, W N; Gessmann, Th; Schubert, E F

    2005-06-15

    Triple-layer omnidirectional reflectors (ODRs) consisting of a semiconductor, a quarter-wavelength transparent dielectric layer, and a metal have high reflectivities for all angles of incidence. Internal ODRs (ambient material's refractive index n > 1.0) are demonstrated that incorporate nanoporous SiO2, a low-refractive-index material (n = 1.23), as well as dense SiO2 (n = 1.46). GaP and Ag serve as the semiconductor and the metal layer, respectively. Reflectivity measurements, including angular dependence, are presented. Calculated angle-integrated TE and TM reflectivities for ODRs employing nanoporous SiO2 are R(int)/TE = 99.9% and R(int)/TM = 98.9%, respectively, indicating the high potential of the ODRs for low-loss waveguide structures.

  7. Cryogenic Refractive Index and Coefficient of Thermal Expansion for the S-TIH1 Glass

    Science.gov (United States)

    Quijada, Manuel A.; Leviton, Douglas; Content, David

    2013-01-01

    Using the CHARMS facility at NASA GSFC, we have measured the cryogenic refractive index of the Ohara S-TIH1 glass from 0.40 to 2.53 micrometers and from 120 to 300 K. We have also examined the spectral dispersion and thermo-optic coefficients (dn/dT). We also derived temperature-dependent Sellmeier models from which refractive index may be calculated for any wavelength and temperature within the stated ranges of each model. The S-TIH1 glass we tested exhibited unusual behavior in the thermo-optic coefficient. We found that for delta index of refraction decrease with a decrease in temperature (positive dn/dT). However, the situation was reversed for delta larger than 0.63 micrometers, where the index will increase with a decrease in temperature (negative dn/dT). We also measured the coefficient of thermal expansion (CTE) for the similar batch of S-TIH1 glass in order to understand its thermal properties. The CTE showed a monotonic change with a decrease in temperature.

  8. Monolithic subwavelength high refractive-index-contrast grating VCSELs

    Science.gov (United States)

    Gebski, Marcin; Dems, Maciej; Lott, James A.; Czyszanowski, Tomasz

    2016-03-01

    In this paper we present optical design and simulation results of vertical-cavity surface-emitting lasers (VCSELs) that incorporate monolithic subwavelength high refractive-index-contrast grating (MHCG) mirrors - a new variety of HCG mirror that is composed of high index material surrounded only on one side by low index material. We show the impact of an MHCG mirror on the performance of 980 nm VCSELs designed for high bit rate and energy-efficient optical data communications. In our design, all or part of the all-semiconductor top coupling distributed Bragg reflector mirror is replaced by an undoped gallium-arsenide MHCG. We show how the optical field intensity distribution of the VCSEL's fundamental mode is controlled by the combination of the number of residual distributed Bragg reflector (DBR) mirror periods and the physical design of the topmost gallium-arsenide MHCG. Additionally, we numerically investigate the confinement factors of our VCSELs and show that this parameter for the MHCG DBR VCSELs may only be properly determined in two or three dimensions due to the periodic nature of the grating mirror.

  9. A refractive index sensor based on taper Michelson interferometer in multimode fiber

    Science.gov (United States)

    Fu, Xinghu; Zhang, Jiangpeng; Wang, Siwen; Fu, Guangwei; Liu, Qiang; Jin, Wa; Bi, Weihong

    2016-11-01

    A refractive index sensor based on taper Michelson interferometer in multimode fiber is proposed. The Hydrofluoric acid corrosion processing is studied in the preparation of single cone multimode optical fiber sensor. The taper Michelson interferometer is fabricated by changing corrosion time. The relationship between fiber sensor feature and corrosion time is analyzed. The experimental results show that the interference spectrum shift in the direction of short wave with the increase of the refractive index. The refractive index sensitivity can reach 115.8008 nm/RIU. Thereby, it can be used in detecting the refractive index in different areas including the environmental protection, health care and food production.

  10. Change in refractive index of muscle tissue during laser-induced interstitial thermotherapy.

    Science.gov (United States)

    Chen, Na; Chen, Meimei; Liu, Shupeng; Guo, Qiang; Chen, Zhenyi; Wang, Tingyun

    2014-01-01

    This paper presents a long-period fiber-grating (LPG) based Michelson interferometric refractometry to monitor the change in refractive index of porcine muscle during laser-induced interstitial thermotherapy (LITT). As the wavelength of RI interferometer alters with the change in refractive index around the probe, the LPG based refractometry is combined with LITT system to measure the change in refractive index of porcine muscle when irradiated by laser. The experimental results show the denaturation of tissue alters the refractive index significantly and the LPG sensor can be applied to monitor the tissue state during the LITT.

  11. Optimized setup for integral refractive index direct determination applying digital holographic microscopy by reflection and transmission

    Science.gov (United States)

    Frómeta, M.; Moreno, G.; Ricardo, J.; Arias, Y.; Muramatsu, M.; Gomes, L. F.; Palácios, G.; Palácios, F.; Velázquez, H.; Valin, J. L.; Ramirez Q, L.

    2017-03-01

    In this paper the integral refractive index of a microscopic sample was directly measured by applying Digital Holographic Microscopy (DHM) capturing transmission and reflection holograms simultaneously, of the same sample's region, using Mach-Zehnder and Michelson micro interferometers for transmission and reflection holograms capture and modeling the 3D sample in a medium of known refractive index nm. The system was calibrated using standard polystyrene sphere immersed in water with known diameter and refractive index, and the method was applied for erythrocyte integral refractive index determination. The results are in accordance with predicted, the measurements error of the order of ± 0.005 in absolute values.

  12. Characteristics measurement of gain and refractive index of traveling-wave semiconductor optical amplifier

    Institute of Scientific and Technical Information of China (English)

    MIAO Qing-yuan; Huang De-xiu; WANG Tao; KONG Xiao-jian; KE Chang-jian

    2005-01-01

    A novel method to measure the gain and refractive index characteristics of traveling-wave semiconductor optical amplifier(TMA) is presented.In-out fiber ends of TWA are used to construct an external cavity resonator to produce big ripple on amplified spontaneous emission(ASE) spectrum.By this means,Hakki-Paoli method is adopted to obtain the gain spectra of TWA over a wide spectral range.From measured longitudinal mode spacing and peak wavelength shift due to increased bias current,we further calculate the effective refractive index and the refractive index change.Special feature of refractive index change above lasing threshold is revealed and explained.

  13. Theoretical and Experimental Study of Long-Period Grating Refractive Index Sensor

    Science.gov (United States)

    Nidhi; Kaler, R. S.; Kapur, Pawan

    2014-01-01

    This article presents the theoretical and experimental investigation of the response of long-period gratings as a refractive index sensor. Cladding modes are calculated, and results are compared with Optigrating 4.2.2 (Optiwave Systems Inc., Ottawa, Canada). The response has been checked for refractive indices ranging from 1 to 1.458. Theoretically simulated results are in accordance with the experimental results. It was found that the software package calculated values correctly up to the seventh decimal point. The ambient refractive index response of a long-period grating over a much wider index range has been modeled for values both less and more than the cladding refractive index.

  14. Broadband giant-refractive-index material based on mesoscopic space-filling curves

    National Research Council Canada - National Science Library

    Chang, Taeyong; Kim, Jong Uk; Kang, Seung Kyu; Kim, Hyowook; Kim, Do Kyung; Lee, Yong-Hee; Shin, Jonghwa

    2016-01-01

    The refractive index is the fundamental property of all optical materials and dictates Snell's law, propagation speed, wavelength, diffraction, energy density, absorption and emission of light in materials...

  15. 3-D photo-patterning of refractive index structures in photosensitive thin film materials

    Science.gov (United States)

    Potter, Jr., Barrett George; Potter, Kelly Simmons

    2002-01-01

    A method of making a three-dimensional refractive index structure in a photosensitive material using photo-patterning. The wavelengths at which a photosensitive material exhibits a change in refractive index upon exposure to optical radiation is first determined and then a portion of the surface of the photosensitive material is optically irradiated at a wavelength at which the photosensitive material exhibits a change in refractive index using a designed illumination system to produce a three-dimensional refractive index structure. The illumination system can be a micro-lenslet array, a macroscopic refractive lens array, or a binary optic phase mask. The method is a single-step, direct-write procedure to produce a designed refractive index structure.

  16. Highly tunable refractive index visible-light metasurface from block copolymer self-assembly

    Science.gov (United States)

    Kim, Ju Young; Kim, Hyowook; Kim, Bong Hoon; Chang, Taeyong; Lim, Joonwon; Jin, Hyeong Min; Mun, Jeong Ho; Choi, Young Joo; Chung, Kyungjae; Shin, Jonghwa; Fan, Shanhui; Kim, Sang Ouk

    2016-01-01

    The refractive index of natural transparent materials is limited to 2–3 throughout the visible wavelength range. Wider controllability of the refractive index is desired for novel optical applications such as nanoimaging and integrated photonics. We report that metamaterials consisting of period and symmetry-tunable self-assembled nanopatterns can provide a controllable refractive index medium for a broad wavelength range, including the visible region. Our approach exploits the independent control of permeability and permittivity with nanoscale objects smaller than the skin depth. The precise manipulation of the interobject distance in block copolymer nanopatterns via pattern shrinkage increased the effective refractive index up to 5.10. The effective refractive index remains above 3.0 over more than 1,000 nm wavelength bandwidth. Spatially graded and anisotropic refractive indices are also obtained with the design of transitional and rotational symmetry modification. PMID:27683077

  17. Nonlinear Refractive Index Measurement in Semiconductor-Doped Glasses

    Directory of Open Access Journals (Sweden)

    M. t. Tavassoli

    1997-04-01

    Full Text Available   There are several techniques in use for non-linear refractive index measurement, namely, interferometric techniques, in which conventional inter-ferometers are used, degenerate for wave mixing (DFWM, and z-scan, Each of these techniques suffers from some shortcmings. For example conventional interferometers like Fabry-Perot and Twyman-Green need high quality optical components, unwanted reflections on these components produce noise, and the device limits the probe-pump anglc, or in z-scan technique one needs very sensitive detectors and since the intensity is monitored by the nonlinear absorption, which is usually present, reduces the measurement accuracy.   In the techniqucs introduced here, in principle, only a plate of the sample is required, and even parallelism of the plate surfaces is not curcial. Experiments can be carried out successfully if the angle between the plate surface is less than few minutes. In the first technique, the probe beam strikes the surface at an arbitray angle of incidence. The reflected beam from the two surfaces of the sample interfere on a photo-sensitive screen like CCD, and more or less linear interference fringes are produced. When the pump beam is switched on, the interference pattern deforms. The amount and the direction of the deformation give the value and the sign of the non-linear refractive index. In this technique the probe-pump angle can be varied from 00 to 1900.  In the second technique, interference between the reflected probe beam from the sample and the diffracted pump beam from the grating induced by the interference of the probe and the pump beams, leads to a series of circular fringes. When the non-linear sample is replaced by a linear material like fuse silica glass, the above mentioned circular fringes are formed, but the number of fringes in a specified angular interval remains fixed as the pump beam intensity increases. But, in the case of a non-linear sample the number changes due to

  18. Quantitative index imaging of coculture cells by scanning focused refractive index microscopy

    Science.gov (United States)

    Sun, Teng-Qian; Ye, Qing; Hu, Fen; Liu, Shi-ke; Wang, Xiao-Wan; Wang, Jin; Deng, Zhi-Chao; Mei, Jian-Chun; Zhou, Wen-Yuan; Zhang, Chun-Ping; Wang, Xin-Yu; Pan, Lei-Ting; Tian, Jian-Guo

    2016-08-01

    We report the quantitative refractive index (RI) imaging of cocultured cells in their living environment by scanning focused refractive index microscopy (SFRIM). Mouse microglial cells and synovial cells are cocultured on the top surface of a trapezoid prism. The RI imaging of living cells is obtained in a reflection-type method. The RI information is deduced with the simple derivative total internal reflection method, where a complex retrieval algorithm or reconstruction process is unnecessary. The outline of each cell is determined according to the RI value compared with that of the immersion liquid. The cocultured cells can be discriminated in the RI image. The measurement is nondestructive and label-free. The experimental results prove that SFRIM is a promising tool in the field of biological optics.

  19. Measurements of the Imaginary Component of the Refractive Index of Weakly Absorbing Single Aerosol Particles.

    Science.gov (United States)

    Willoughby, Rose E; Cotterell, Michael I; Lin, Hongze; Orr-Ewing, Andrew J; Reid, Jonathan P

    2017-08-03

    The interaction of atmospheric aerosols with radiation remains a significant source of uncertainty in modeling radiative forcing. Laboratory measurements of the microphysical properties of atmospherically relevant particles is one approach to reduce this uncertainty. We report a new method to investigate light absorption by a single aerosol particle, inferring changes in the imaginary part of the refractive index with a change in environmental conditions (e.g., relative humidity) and inferring the size dependence of the optical extinction cross section. More specifically, we present measurements of the response of single aerosol particles to near-infrared (NIR) laser-induced heating at a wavelength of 1520 nm. Particles were composed of aqueous NaCl or (NH4)2SO4 and were studied over ranges in relative humidity (40-85%), particle radius (1-2.2 μm), and NIR laser power. The ensuing size change and real component of the refractive index were extracted from measurements of the angular variation in elastically scattered light. From the heating-induced size change at varying NIR beam intensities, we retrieved the change in the imaginary component of the refractive index. In addition, cavity ring-down spectroscopy measurements monitored the change in extinction cross section with modulation of the heating laser power.

  20. Standard guide for choosing a method for determining the index of refraction and dispersion of glass

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2006-01-01

    1.1 This guide identifies and describes seven test methods for measuring the index of refraction of glass, with comments relevant to their uses such that an appropriate choice of method can be made. Four additional methods are mentioned by name, and brief descriptive information is given in Annex A1. The choice of a test method will depend upon the accuracy required, the nature of the test specimen that can be provided, the instrumentation available, and (perhaps) the time required for, or the cost of, the analysis. Refractive index is a function of the wavelength of light; therefore, its measurement is made with narrow-bandwidth light. Dispersion is the physical phenomenon of the variation of refractive index with wavelength. The nature of the test-specimen refers to its size, form, and quality of finish, as described in each of the methods herein. The test methods described are mostly for the visible range of wavelengths (approximately 400 to 780m); however, some methods can be extended to the ultraviolet a...

  1. Imaginary refractive index and other microphysical properties of volcanic ash, Sarahan dust, and other mineral aerosols

    Science.gov (United States)

    Rocha Lima, A.; Martins, J.; Krotkov, N. A.; Artaxo, P.; Todd, M.; Ben Ami, Y.; Dolgos, G.; Espinosa, R.

    2013-12-01

    Aerosol properties are essential to support remote sensing measurements, atmospheric circulation and climate models. This research aims to improve the understanding of the optical and microphysical properties of different types of aerosols particles. Samples of volcanic ash, Saharan dust and other mineral aerosols particles were analyzed by different techniques. Ground samples were sieved down to 45um, de-agglomerated and resuspended in the laboratory using a Fluidized Bed Aerosol Generator (FBAG). Particles were collected on Nuclepore filters into PM10, PM2.5, or PM1.0. and analyzed by different techniques, such as Scanning Electron Microscopy (SEM) for determination of size distribution and shape, spectral reflectance for determination of the optical absorption properties as a function of the wavelength, material density, and X-Ray fluorescence for the elemental composition. The spectral imaginary part of refractive index from the UV to the short wave infrared (SWIR) wavelength was derived empirically from the measurements of the spectral mass absorption coefficient, size distribution and density of the material. Some selected samples were also analyzed with the Polarized Imaging Nephelometer (PI-Neph) instrument for the characterization of the aerosol polarized phase function. This work compares results of the spectral refractive index of different materials obtained by our methodology with those available in the literature. In some cases there are significant differences both in magnitude and spectral dependence of the imaginary refractive index. These differences are evaluated and discussed in this work.

  2. Measurement of the refractive index of human teeth by optical coherence tomography

    Science.gov (United States)

    Meng, Zhuo; Yao, X. Steve; Yao, Hui; Liang, Yan; Liu, Tiegen; Li, Yanni; Wang, Guanhua; Lan, Shoufeng

    2009-05-01

    We describe a novel method based on optical coherence tomography (OCT) for the accurate measurement of the refractive index of in vitro human teeth. We obtain the refractive indices of enamel, dentin, and cementum to be 1.631+/-0.007, 1.540+/-0.013, and 1.582+/-0.010, respectively. The profile of the refractive index is readily obtained via an OCT B scan across a tooth. This method can be used to study the refractive index changes caused by dental decay and therefore has great potential for the clinical diagnosis of early dental caries.

  3. Influence of Complex Refractive Index on Diffuse Reflection of Biological Tissues

    Institute of Scientific and Technical Information of China (English)

    LAI Jian-Cheng; LI Zhen-Hua; HE An-Zhi

    2005-01-01

    @@ Complex refractive indices are introduced to solve various boundary questions at the interfaces when modelling light migration within heterogeneous tissues. Combined with the complex refractive index, Fresnel's formulae are used to describe the reflection and transmission at the interfaces between two heterogeneous tissues layers.Using the Monte Carlo method, the influence of the complex refractive index on diffuse reflection of semi-infinite biological tissues is discussed. The results show that neglecting the imaginary part of the refractive index of tissues will bring a major deviation in the diffuse reflection of semi-infinite biological tissues when its emitting point is apart from the incident point.

  4. Proposed design for high precision refractive index sensor using integrated planar lightwave circuit

    Science.gov (United States)

    Maru, Koichi; Fujii, Yusaku; Zhang, Shulian; Hou, Wenmei

    2009-07-01

    A high precision and compact refractive index sensor is proposed. The combination of coarse measurement utilizing the change of the angle of refraction and fine measurement utilizing the phase change is newly proposed to measure absolute refractive index precisely. The proposed method does not need expensive optical measurement equipment such as an optical spectrum analyzer. The integrated planar lightwave circuit (PLC) technology enables us to obtain a compact sensor that is preferable for the practical use. The principle, design, and some configurations for precise refractive index measurement are described.

  5. Negative refractive index of metallic cross-I-shaped pairs: origin and evolution with pair gap width.

    Science.gov (United States)

    Ma, Y G; Wang, X C; Ong, C K

    2008-07-01

    A structured composite of the negative index of refraction was fabricated by one layer of cross-I-shaped metal pairs. In this structure, the electric and magnetic inclusions were effectively integrated into one small unit. We varied the spacing of the cross pair to control the location of the magnetic resonance mode and their intercoupling with the electric mode. The frequency dependences of permittivity, permeability, and refractive indices with different gap widths of the pairs were systematically discussed by free-space measurement as well as numerical simulation. A spacing window dependent on the geometrical parameters was found in which the real part of the refractive index could have a negative value. The one-layer cross-pair pattern proposed in this work can be extended to three-dimensional structures with well-controlled interlayer coupling that will greatly facilitate the fabrication and measurement of negative-index materials in high frequencies.

  6. Numerical Study of Negative-Refractive Index Ferrite Waveguide

    Directory of Open Access Journals (Sweden)

    Mohammed O. Sid-Ahmed

    2012-03-01

    Full Text Available Consider a magnetized ferrite-wire waveguide structure situated between two half free spaces. Ferrites to provide negative permeability and wire array to provide negative permittivity. The structure form left-handed material (LHM with negative refractive index. The transmission of electromagnetic waves through the structure is investigated theoretically. Maxwell's equations are used to determine the electric and magnetic fields of the incident waves at each layer. Snell's law is applied and the boundary conditions are imposed at each layer interface to calculate the reflected and transmitted powers of the structure. Numerical results are illustrated to show the effect of frequency, applied magnetic fields, angle of incidence and LHM thickness on the mentioned powers. The analyzed results show that the transmission is very good when the permeability and permittivity of the structure are both simultaneously negative. The frequency band corresponding to this transmission can be tuned by changing the applied magnetic fields. The obtained results are in agreement with the law of conservation of energy. Consider a magnetized ferrite-wire waveguide structure situated between two half free spaces. Ferrites to provide negative permeability and wire array to provide negative permittivity. The structure form left-handed material (LHM with negative refractive index. The transmission of electromagnetic waves through the structure is investigated theoretically. Maxwell's equations are used to determine the electric and magnetic fields of the incident waves at each layer. Snell's law is applied and the boundary conditions are imposed at each layer interface to calculate the reflected and transmitted powers of the structure. Numerical results are illustrated to show the effect of frequency, applied magnetic fields, angle of incidence and LHM thickness on the mentioned powers. The analyzed results show that the transmission is very good when the permeability and

  7. Targeted alteration of real and imaginary refractive index of biological cells by histological staining

    OpenAIRE

    Cherkezyan, Lusik; Subramanian, Hariharan; Stoyneva, Valentina; Rogers, Jeremy D.; Yang, Seungmoo; Damania, Dhwanil; Taflove, Allen; Backman, Vadim

    2012-01-01

    Various staining techniques are commonly used in biomedical research to investigate cellular morphology. By inducing absorption of light, staining dyes change the intracellular refractive index due to the Kramers-Kronig relationship. We present a method for creating 2-D maps of real and imaginary refractive indices of stained biological cells using their thickness and absorptance. We validate our technique on dyed polystyrene microspheres and quantify the alteration in refractive index of sta...

  8. Simulations and realizations of active right-handed metamaterials with negative refractive index.

    Science.gov (United States)

    Nistad, Bertil; Skaar, Johannes

    2007-08-20

    The theory of determining the sign of the refractive index in active materials is discussed. Animations of numerical simulations are presented, supporting the claim that negative refractive index may occur in right-handed media. An example of such a medium, in the form of a lumped circuit model with active and passive resonances, is presented.

  9. Spectral response of Cantor multilayers made of materials with negative refractive index

    OpenAIRE

    Gerardin, Jaline; Lakhtakia, Akhlesh

    2002-01-01

    Whereas Cantor multilayers made of an isotropic dielectric-magnetic material with positive refractive index will show power-law characteristics, low-order Cantor multilayers made of materials with negative refractive index will not exhibit the power-law nature. A reason for this anomalous behavior is presented.

  10. Simulations and realizations of active right-handed metamaterials with negative refractive index

    OpenAIRE

    Nistad, Bertil; Skaar, Johannes

    2007-01-01

    The theory of determining the sign of the refractive index in active materials is discussed. Animations of numerical simulations are presented, supporting the claim that negative refractive index may occur in right-handed media. An example of such a medium, in the form of a lumped circuit model with active and passive resonances, is presented.

  11. Refractive Index Measurement within a Photonic Crystal Fibre Based on Short Wavelength Diffraction

    Directory of Open Access Journals (Sweden)

    Nathaniel Groothoff

    2007-10-01

    Full Text Available A new class of refractive index sensors using solid core photonic crystal fibres isdemonstrated. Coherent scattering at the cladding lattice is used to optically characterizematerials inserted into the fibre holes. The liquid to solid phase transition of water uponfreezing to ice 1h is characterized by determining the refractive index.

  12. Refractive index sensor based on a 1D photonic crystal in a microfluidic channel

    DEFF Research Database (Denmark)

    Rodrigues de Sousa Nunes, Pedro André; Mortensen, Asger; Kutter, Jörg Peter

    2010-01-01

    A refractive index sensor has been fabricated in silicon oxynitride by standard UV lithography and dry etching processes. The refractive index sensor consists of a 1D photonic crystal (PhC) embedded in a microfluidic channel addressed by fiber-terminated planar waveguides. Experimental...

  13. Decoupling the refractive index from the electrical properties of transparent conducting oxides via periodic superlattices

    NARCIS (Netherlands)

    Caffrey, D.; Norton, E.; Coileain, C.O.; Smith, C.M.; Bulfin, B.; Farrell, L.; Shvets, I.V.; Fleischer, K.

    2016-01-01

    We demonstrate an alternative approach to tuning the refractive index of materials. Current methodologies for tuning the refractive index of a material often result in undesirable changes to the structural or optoelectronic properties. By artificially layering a transparent conducting oxide with a

  14. Homodyne chiral polarimetry for measuring thermo-optic refractive index variations.

    Science.gov (United States)

    Twu, Ruey-Ching; Wang, Jhao-Sheng

    2015-10-10

    Novel reflection-type homodyne chiral polarimetry is proposed for measuring the refractive index variations of a transparent plate under thermal impact. The experimental results show it is a simple and useful method for providing accurate measurements of refractive index variations. The measurement can reach a resolution of 7×10-5.

  15. X-ray tomography using the full complex index of refraction

    DEFF Research Database (Denmark)

    Nielsen, Mikkel Schou; Lauridsen, Torsten; Thomsen, M.

    2012-01-01

    We report on x-ray tomography using the full complex index of refraction recorded with a grating-based x-ray phase-contrast setup. Combining simultaneous absorption and phase-contrast information, the distribution of the full complex index of refraction is determined and depicted in a bivariate...

  16. Design and fabrication activity towards 3D negative refraction index materials in the IR region

    DEFF Research Database (Denmark)

    Malureanu, Radu; Andryieuski, Andrei; Lavrinenko, Andrei

    2009-01-01

    In this paper we present a new 3D isotropic structure that allows obtaining negative refraction index in the telecom wavelength as well as first fabrication efforts towards obtaining such structures.......In this paper we present a new 3D isotropic structure that allows obtaining negative refraction index in the telecom wavelength as well as first fabrication efforts towards obtaining such structures....

  17. The effect of the atmospheric refractive index on the radio signal of extensive air showers

    Science.gov (United States)

    Corstanje, A.; Bonardi, A.; Buitink, S.; Falcke, H.; Hörandel, J. R.; Mitra, P.; Mulrey, K.; Nelles, A.; Rachen, J. P.; Rossetto, L.; Schellart, P.; Scholten, O.; ter Veen, S.; Thoudam, S.; Trinh, G.; Winchen, T.

    2017-03-01

    For the interpretation of measurements of radio emission from extensive air showers, an important systematic uncertainty arises from natural variations of the atmospheric refractive index n. At a given altitude, the refractivity N =106(n - 1) can have relative variations on the order of 10% depending on temperature, humidity, and air pressure. Typical corrections to be applied to N are about 4%. Using CoREAS simulations of radio emission from air showers, we have evaluated the effect of varying N on measurements of the depth of shower maximum Xmax. For an observation band of 30-80 MHz, a difference of 4% in refractivity gives rise to a systematic error in the inferred Xmax between 3.5 and 11 g/cm2, for proton showers with zenith angles ranging from 15 to 50°. At higher frequencies, from 120 to 250 MHz, the offset ranges from 10 to 22 g/cm2. These offsets were found to be proportional to the geometric distance to Xmax. We have compared the results to a simple model based on the Cherenkov angle. For the 120 - 250 MHz band, the model is in qualitative agreement with the simulations. In typical circumstances, we find a slight decrease in Xmax compared to the default refractivity treatment in CoREAS. While this is within commonly treated systematic uncertainties, accounting for it explicitly improves the accuracy of Xmax measurements.

  18. Low-Coherence Reflectometry for Refractive Index Measurements of Cells in Micro-Capillaries

    Directory of Open Access Journals (Sweden)

    Francesca Carpignano

    2016-10-01

    Full Text Available The refractive index of cells provides insights into their composition, organization and function. Moreover, a good knowledge of the cell refractive index would allow an improvement of optical cytometric and diagnostic systems. Although interferometric techniques undoubtedly represent a good solution for quantifying optical path variation, obtaining the refractive index of a population of cells non-invasively remains challenging because of the variability in the geometrical thickness of the sample. In this paper, we demonstrate the use of infrared low-coherence reflectometry for non-invasively quantifying the average refractive index of cell populations gently confined in rectangular glass micro-capillaries. A suspension of human red blood cells in plasma is tested as a reference. As a use example, we apply this technique to estimate the average refractive index of cell populations belonging to epithelial and hematological families.

  19. High Sensitivity Refractive Index Sensor Based on Dual-Core Photonic Crystal Fiber with Hexagonal Lattice

    Directory of Open Access Journals (Sweden)

    Haiyang Wang

    2016-10-01

    Full Text Available A refractive index sensor based on dual-core photonic crystal fiber (PCF with hexagonal lattice is proposed. The effects of geometrical parameters of the PCF on performances of the sensor are investigated by using the finite element method (FEM. Two fiber cores are separated by two air holes filled with the analyte whose refractive index is in the range of 1.33–1.41. Numerical simulation results show that the highest sensitivity can be up to 22,983 nm/RIU(refractive index unit when the analyte refractive index is 1.41. The lowest sensitivity can reach to 21,679 nm/RIU when the analyte refractive index is 1.33. The sensor we proposed has significant advantages in the field of biomolecule detection as it provides a wide-range of detection with high sensitivity.

  20. High Sensitivity Refractive Index Sensor Based on Dual-Core Photonic Crystal Fiber with Hexagonal Lattice.

    Science.gov (United States)

    Wang, Haiyang; Yan, Xin; Li, Shuguang; An, Guowen; Zhang, Xuenan

    2016-10-08

    A refractive index sensor based on dual-core photonic crystal fiber (PCF) with hexagonal lattice is proposed. The effects of geometrical parameters of the PCF on performances of the sensor are investigated by using the finite element method (FEM). Two fiber cores are separated by two air holes filled with the analyte whose refractive index is in the range of 1.33-1.41. Numerical simulation results show that the highest sensitivity can be up to 22,983 nm/RIU(refractive index unit) when the analyte refractive index is 1.41. The lowest sensitivity can reach to 21,679 nm/RIU when the analyte refractive index is 1.33. The sensor we proposed has significant advantages in the field of biomolecule detection as it provides a wide-range of detection with high sensitivity.

  1. A posteriori error of the transmission interference method of thin film refractive index calculation

    Science.gov (United States)

    Sisonyuk, A. G.

    1996-04-01

    The method of a posteriori error calculation has been applied to the calculation of the refractive index and thickness of optical thin films from spectrophotometric transmission interference measurements. The refractive index and thickness of transparent or semitransparent thin film deposited on a transparent substrate can be calculated using both Edser - Butler and Swanepoel equations. A least-squares method and smoothing have been used to refine the Swanepoel's estimate and a correlation analysis has been applied to the differences between the two refractive index estimates. The refractive index covariance function is approximated by an exponential function and is then used in the statistical modelling process. The method has been applied to the calculation of the refractive index of a 0022-3727/29/4/020/img1 thin film deposited on a quartz substrate. In practice the method is especially useful in view of its ability to detect the deterioration of data caused by instrumental drift.

  2. Low-Coherence Reflectometry for Refractive Index Measurements of Cells in Micro-Capillaries

    Science.gov (United States)

    Carpignano, Francesca; Rigamonti, Giulia; Mazzini, Giuliano; Merlo, Sabina

    2016-01-01

    The refractive index of cells provides insights into their composition, organization and function. Moreover, a good knowledge of the cell refractive index would allow an improvement of optical cytometric and diagnostic systems. Although interferometric techniques undoubtedly represent a good solution for quantifying optical path variation, obtaining the refractive index of a population of cells non-invasively remains challenging because of the variability in the geometrical thickness of the sample. In this paper, we demonstrate the use of infrared low-coherence reflectometry for non-invasively quantifying the average refractive index of cell populations gently confined in rectangular glass micro-capillaries. A suspension of human red blood cells in plasma is tested as a reference. As a use example, we apply this technique to estimate the average refractive index of cell populations belonging to epithelial and hematological families. PMID:27727172

  3. The role of refractive index gradient on sensitivity and limit of detection of microdisk sensors

    Science.gov (United States)

    Najafi, Zohreh; Vahedi, Mohammad; Behjat, Abbas

    2016-09-01

    This paper presents a new type of microdisk resonator sensor with a gradient refractive index (GRIN) that can achieve higher sensitivity with respect to constant refractive index disks. The behavior of the microdisk resonator is simulated by 2D-FDTD method. The shift in the resonance frequency for different thicknesses of the absorbed layer and different refractive index gradients of the microdisks are studied. The best refractive index gradient function is found that leads to the largest sensitivity and smallest limit of detection. The sensitivity of a GRIN microresonator sensor (GMS) with a convex quadratic refractive index function is approximately 11 times as much as that of homogeneous microdisk sensor, which is the best record among GMSs.

  4. Decoupling the refractive index from the electrical properties of transparent conducting oxides via periodic superlattices

    Science.gov (United States)

    Caffrey, David; Norton, Emma; Coileáin, Cormac Ó.; Smith, Christopher M.; Bulfin, Brendan; Farrell, Leo; Shvets, Igor V.; Fleischer, Karsten

    2016-09-01

    We demonstrate an alternative approach to tuning the refractive index of materials. Current methodologies for tuning the refractive index of a material often result in undesirable changes to the structural or optoelectronic properties. By artificially layering a transparent conducting oxide with a lower refractive index material the overall film retains a desirable conductivity and mobility while acting optically as an effective medium with a modified refractive index. Calculations indicate that, with our refractive index change of 0.2, a significant reduction of reflective losses could be obtained by the utilisation of these structures in optoelectronic devices. Beyond this, periodic superlattice structures present a solution to decouple physical properties where the underlying electronic interaction is governed by different length scales.

  5. Optical Coatings Formed by Gradient Refractive Index Materials

    Directory of Open Access Journals (Sweden)

    Kęstutis Juškevičius

    2012-01-01

    Full Text Available Recent advances in ion beam sputtering technology enabled efficient deposition of different oxide mixture coatings. In the present investigation, coating materials ZrO2 and SiO2 were utilized for the synthesis of different mixtures. The goal of the conducted investigation was to explore the potential of ZrO2/SiO2 mixtures, especially for applications in the range of the UV spectral. Deposited dielectric mirrors having classical quarter-wave and “rised” design with ZrO2/SiO2 mixture for 266 nm and 355 nm showed good resistance to laser radiation.We also investigated the “fatigue” behavior of LIDT’s in LBO crystals with single, dual and triple wavelength anti-reflective coatings (AR@355, AR@532+1064 and AR@355+532+1064 in order to optimize design and layer materials. The influence of gradient refractive index profiles on damage resistance is of a special interest. We selected a few designs of antireflective coatings which demonstrated the best resistance to laser radiation.An experimental study on rugate filter coatings showed the need for a more accurate characterization of optical properties of metal oxides and their corresponding mixtures.Article in Lithuanian

  6. Determination of refractive index of various materials on Brewster angle

    CERN Document Server

    Tikhonov, Eugene A

    2015-01-01

    Studied experimentally the origin of the non-zero reflection of p-polarized radiation (TM) of Brewster's angle. The results have shown the residual reflected light in the vicinity of Brewster angle occurs due to inaccessibility 100% polarization degree the incident linearly-polarized radiation and installation of the zero azimuthal angle. These factors create the s-component of the radiation reflected from the examined surface indeed. A smooth change of reflected light polarization in the vicinity of Brewster angle in the sequence p-s-p appears due to the changing power proportion of reflected p-, and s-components but not is the result of the atomically thin transitional layer at the border of the material/environment according to Drude model. Metrological aspects of refractive index measurement by Brewster angle are investigated: due to the above-mentioned factors, as well as due to the contribution of the reflected scattered light caused by on residual roughness of the optical surface. Advantages of Brewste...

  7. Double high refractive-index contrast grating VCSEL

    Science.gov (United States)

    Gebski, Marcin; Dems, Maciej; Wasiak, Michał; Sarzała, Robert P.; Lott, J. A.; Czyszanowski, Tomasz

    2015-03-01

    Distributed Bragg reflectors (DBRs) are typically used as the highly reflecting mirrors of vertical-cavity surface-emitting lasers (VCSELs). In order to provide optical field confinement, oxide apertures are often incorporated in the process of the selective wet oxidation of high aluminum-content DBR layers. This technology has some potential drawbacks such as difficulty in controlling the uniformity of the oxide aperture diameters across a large-diameter (≥ 6 inch) production wafers, high DBR series resistance especially for small diameters below about 5 μm despite elaborate grading and doping schemes, free carrier absorption at longer emission wavelengths in the p-doped DBRs, reduced reliability for oxide apertures placed close to the quantum wells, and low thermal conductivity for transporting heat away from the active region. A prospective alternative mirror is a high refractive index contrast grating (HCG) monolithically integrated with the VCSEL cavity. Two HCG mirrors potentially offer a very compact and simplified VCSEL design although the problems of resistance, heat dissipation, and reliability are not completely solved. We present an analysis of a double HCG 980 nm GaAs-based ultra-thin VCSEL. We analyze the optical confinement of such a structure with a total optical thickness is ~1.0λ including the optical cavity and the two opposing and parallel HCG mirrors.

  8. Estimating index of refraction from polarimetric hyperspectral imaging measurements.

    Science.gov (United States)

    Martin, Jacob A; Gross, Kevin C

    2016-08-01

    Current material identification techniques rely on estimating reflectivity or emissivity which vary with viewing angle. As off-nadir remote sensing platforms become increasingly prevalent, techniques robust to changing viewing geometries are desired. A technique leveraging polarimetric hyperspectral imaging (P-HSI), to estimate complex index of refraction, N̂(ν̃), an inherent material property, is presented. The imaginary component of N̂(ν̃) is modeled using a small number of "knot" points and interpolation at in-between frequencies ν̃. The real component is derived via the Kramers-Kronig relationship. P-HSI measurements of blackbody radiation scattered off of a smooth quartz window show that N̂(ν̃) can be retrieved to within 0.08 RMS error between 875 cm-1 ≤ ν̃ ≤ 1250 cm-1. P-HSI emission measurements of a heated smooth Pyrex beaker also enable successful N̂(ν̃) estimates, which are also invariant to object temperature.

  9. Index of Refraction Measurements Using a Laser Distance Meter

    Science.gov (United States)

    Ochoa, Romulo; Fiorillo, Richard; Ochoa, Cris

    2014-01-01

    We present a simple method to determine the refractive indices of transparent media using a laser distance meter. Indices of refraction have been obtained by measuring the speed of light in materials. Some speed of light techniques use time-of-flight measurements in which pulses are emitted by lasers and the time interval is measured for the pulse…

  10. Index of Refraction Measurements Using a Laser Distance Meter

    Science.gov (United States)

    Ochoa, Romulo; Fiorillo, Richard; Ochoa, Cris

    2014-01-01

    We present a simple method to determine the refractive indices of transparent media using a laser distance meter. Indices of refraction have been obtained by measuring the speed of light in materials. Some speed of light techniques use time-of-flight measurements in which pulses are emitted by lasers and the time interval is measured for the pulse…

  11. Feasibility study for pseudoscopic problem in integral imaging using negative refractive index materials.

    Science.gov (United States)

    Zhang, JianLei; Wang, XiaoRui; Chen, YuJiao; Zhang, QiPing; Yu, Shuo; Yuan, Ying; Guo, BingTao

    2014-08-25

    To solve the pseudoscopic problem, we propose a one-step integral imaging system with negative refractive index materials, which can avoid the deterioration in resolution inherent to the optical or digital two-step processes. Specifically, the proposed method is based on the novel feature of negative refractive index materials, bending light to a negative angle relative to the surface normal. The pseudoscopic imaging property of the negative refractive index material slab is theoretically investigated. For formation of orthoscopic reconstructed images, the matching condition of the negative index lens array and the positive index lens array is deduced. Two types of conceptual prototypes of integral imaging system with negative refractive index materials are designed. Experimental results show the validity of the proposed method. To the best of our knowledge, this is the first time to explore the application of negative index materials in eliminating the pseudoscopic effect in integral imaging.

  12. Perspectives of the Explicit Retrieval of the Complex Refractive Index of Aerosols from Optical Data Taken with Lidar

    Science.gov (United States)

    Kolgotin, Alexei; Müller, Detlef; Chemyakin, Eduard; Romanov, Anton

    2016-06-01

    We developed an explicit approach for the retrieval of the complex refractive index from optical data, i.e. backscatter and extinction coefficients measured with lidar. In this approach we assume that we know the particle size distributions as well as the optical data. On the basis of this approach we carried out numerical simulations in order to test the uncertainty of the retrieval of the complex refractive index in dependence of the combination of extinction and backscatter coefficients, the measurement wavelengths and measurement errors.

  13. Perspectives of the Explicit Retrieval of the Complex Refractive Index of Aerosols from Optical Data Taken with Lidar

    Directory of Open Access Journals (Sweden)

    Kolgotin Alexei

    2016-01-01

    Full Text Available We developed an explicit approach for the retrieval of the complex refractive index from optical data, i.e. backscatter and extinction coefficients measured with lidar. In this approach we assume that we know the particle size distributions as well as the optical data. On the basis of this approach we carried out numerical simulations in order to test the uncertainty of the retrieval of the complex refractive index in dependence of the combination of extinction and backscatter coefficients, the measurement wavelengths and measurement errors.

  14. On retrieving refractive index of dust-like particles using shape distributions of ellipsoids

    Directory of Open Access Journals (Sweden)

    O. Kemppinen

    2015-06-01

    Full Text Available Ellipsoid-based retrievals are widely used for investigating optical properties of non-ellipsoidal atmospheric particles, such as dust. In this work, the applicability of ellipsoids for retrieving the refractive index of dust-like target model particles from scattering data is investigated. This is a pure modeling study, where stereogrammetrically retrieved model dust shapes are used as targets. The primary objective is to study whether the refractive index of these target particles can be inverted from their scattering matrices using ellipsoidal model particles. To achieve this, first scattering matrices for the target model particles with known refractive indices are computed. On one hand, a non-negative least squares fitting is performed, separately for different scattering matrix elements, for a set of 46 differently shaped ellipsoids by using different assumed refractive indices. Then, the fitting error is evaluated to establish whether the ellipsoidal base best matches the target scattering matrix elements when the correct refractive index is assumed. On the other hand, we also test whether the ellipsoids best match the target data with the correct refractive index, if a predefined (uniform shape distribution for ellipsoids is assumed, instead of optimizing the shape distribution separately for each tested refractive index. The results show that for both of these approaches using the ellipsoids with the true refractive index produces good results, but also that for each element even better results are acquired by using wrong refractive indices. In addition, the best agreement is found for different scattering matrix elements using different refractive indices. The findings imply that the inversion of refractive index of non-ellipsoidal particles may not be reliable using ellipsoids. Furthermore, it is demonstrated that the differences in single-scattering albedo and asymmetry parameter between the best-match ellipsoid ensemble and the

  15. Retrieving microphysical properties of dust-like particles using ellipsoids: the case of refractive index

    Science.gov (United States)

    Kemppinen, O.; Nousiainen, T.; Merikallio, S.; Räisänen, P.

    2015-10-01

    Distributions of ellipsoids are often used to simulate the optical properties of non-ellipsoidal atmospheric particles, such as dust. In this work, the applicability of ellipsoids for retrieving the refractive index of dust-like target model particles from scattering data is investigated. This is a pure modeling study, in which stereogrammetrically retrieved model dust shapes are used as targets. The primary objective is to study whether the refractive index of these target particles can be inverted from their scattering matrices using ellipsoidal model particles. To achieve this, first scattering matrices for the target model particles with known refractive indices are computed. First, a non-negative least squares fitting is performed, individually for each scattering matrix element, for 46 differently shaped ellipsoids by using different assumed refractive indices. Then, the fitting error is evaluated to establish whether the ellipsoid ensemble best matches the target scattering matrix elements when the correct refractive index is assumed. Second, we test whether the ellipsoids best match the target data with the correct refractive index, when a predefined (uniform) shape distribution for ellipsoids is assumed, instead of optimizing the shape distribution separately for each tested refractive index. The results show not only that for both of these approaches using ellipsoids with the true refractive index produces good results but also that for each scattering matrix element even better results are acquired by using wrong refractive indices. In addition, the best agreement is obtained for different scattering matrix elements using different refractive indices. The findings imply that retrieval of refractive index of non-ellipsoidal particles whose single-scattering properties have been modeled with ellipsoids may not be reliable. Furthermore, it is demonstrated that the differences in single-scattering albedo and asymmetry parameter between the best

  16. On retrieving refractive index of dust-like particles using shape distributions of ellipsoids

    Science.gov (United States)

    Kemppinen, O.; Nousiainen, T.; Merikallio, S.; Räisänen, P.

    2015-06-01

    Ellipsoid-based retrievals are widely used for investigating optical properties of non-ellipsoidal atmospheric particles, such as dust. In this work, the applicability of ellipsoids for retrieving the refractive index of dust-like target model particles from scattering data is investigated. This is a pure modeling study, where stereogrammetrically retrieved model dust shapes are used as targets. The primary objective is to study whether the refractive index of these target particles can be inverted from their scattering matrices using ellipsoidal model particles. To achieve this, first scattering matrices for the target model particles with known refractive indices are computed. On one hand, a non-negative least squares fitting is performed, separately for different scattering matrix elements, for a set of 46 differently shaped ellipsoids by using different assumed refractive indices. Then, the fitting error is evaluated to establish whether the ellipsoidal base best matches the target scattering matrix elements when the correct refractive index is assumed. On the other hand, we also test whether the ellipsoids best match the target data with the correct refractive index, if a predefined (uniform) shape distribution for ellipsoids is assumed, instead of optimizing the shape distribution separately for each tested refractive index. The results show that for both of these approaches using the ellipsoids with the true refractive index produces good results, but also that for each element even better results are acquired by using wrong refractive indices. In addition, the best agreement is found for different scattering matrix elements using different refractive indices. The findings imply that the inversion of refractive index of non-ellipsoidal particles may not be reliable using ellipsoids. Furthermore, it is demonstrated that the differences in single-scattering albedo and asymmetry parameter between the best-match ellipsoid ensemble and the target particles may

  17. Determining the nonlinear refractive index of fused quartz by femtosecond laser Z-scan technology

    Science.gov (United States)

    Zhang, Lin; Ren, Huan; Ma, Hua; Shi, Zhendong; Yang, Yi; Yuan, Quan; Feng, Xiaoxuan; Ma, Yurong; Chen, Bo

    2016-10-01

    Z-scan technology is an experimental technique for determining the nonlinear refractive index based on the principle of transformation of phase distortion to amplitude distortion when a laser beam propagates through a nonlinear material. For most of the Z-scan system based on the nanosecond or picosecond laser, the accumulation of thermal effects becomes a big problem in nonlinear refractive index measurement especially for the nonlinear materials such as fused quartz and neodymium glass which have a weak nonlinear refractive effect. To overcome this problem, a system for determining the nonlinear refractive index of optical materials based on the femtosecond laser Z-scan technology is presented. Using this system, the nonlinear refractive index of the fused quartz is investigated.

  18. Analysis of the use of tapered graded-index polymer optical fibers for refractive-index Sensors.

    Science.gov (United States)

    Arrue, J; Jiménez, F; Aldabaldetreku, G; Durana, G; Zubia, J; Lomer, M; Mateo, J

    2008-10-13

    The behavior of tapered graded-index polymer optical fibers is analyzed computationally for different refractive indices of the surrounding medium. This serves to clarify the main parameters affecting their possible performance as refractive-index sensors and extends an existing study of similar structures in glass fibers. The ray-tracing method is employed, its specific implementation is explained, and its results are compared with experimental ones, both from our laboratory and from the literature. The results show that the current commercial graded-index polymer optical fibers can be used to measure a large range of refractive indices with several advantages over glass fibers.

  19. Nonlinear wave mixing and susceptibility properties of negative refractive index materials.

    Science.gov (United States)

    Chowdhury, Aref; Tataronis, John A

    2007-01-01

    We present an analysis of second-order and third-order nonlinear susceptibilities and wave-mixing properties of negative refractive index materials. We show that the nonlinear susceptibilities for noncentrosymmetric and centrosymmetric media may be positive or negative and away from resonance depending on the frequency of interest relative to the resonant frequencies of the material. Manipulation of the signs of the nonlinear susceptibilities is important in the field of optics, particularly for solitons and compensation of nonlinear effects. We also show that three- and four-wave mixing can be naturally phase matched in the material.

  20. Local Refractive Index Measurements at Low Temperatures using Photonic Crystal Cavities

    CERN Document Server

    Wolters, Janik; Schoengen, Max; Schell, Andreas W; Probst, Jürgen; Löchel, Bernd; Benson, Oliver

    2012-01-01

    Photonic crystal cavities have a wide range of applications in physics today. Here we demonstrate a method to use the narrow resonances of photonic crystal cavities to measure the temperature dependence of the refractive index of gallium phosphide in a temperature range between 5 K and near room temperature at a wavelength of about 605 nm. On one hand, this is an essential step for the design of GaP photonic crystal structures for quantum technology applications. On the other hand, this demonstrates how photonic structures can be utilized to locally determine the optical properties of semiconductor materials in attoliter volumina.

  1. Refractive index fluctuations in solids: nanoprobing by means of single-molecule spectroscopy

    CERN Document Server

    Anikushina, T A; Gorshelev, A A; Naumov, A V

    2015-01-01

    We suggest a novel approach for probing of local fluctuations of the refractive index $n$ in solids by means of single-molecule (SM) spectroscopy. It is based on the dependence $T_1(n)$ of the effective radiative lifetime $T_1$ of dye centres in solids on $n$ due to the local field effects. Detection of SM zero-phonon lines at ultra-low temperatures gives the values of SM natural spectral linewidth (which is inverse proportional to $T_1$) and makes it possible to reveal the distribution of the local $n$ values in solids. Here we demonstrate this possibility on the example of amorphous polyethylene and polycrystalline naphthalene doped with terrylene.

  2. Measurement of Refractive Index for High Reflectance Materials with Terahertz Time Domain Reflection Spectroscopy

    Institute of Scientific and Technical Information of China (English)

    SUN Wen-Feng; WANG Xin-Ke; ZHANG Yan

    2009-01-01

    A method to measure the refractive index for high reflectance materials in the terahertz range with terahertz time domain reflection spectroscopy is proposed. In this method, the THz waveforms reflected by a silicon wafer and high reflectance sample are measured respectively. The refractive index of the silicon wafer, measured with the THz time domain transmission spectroscopy, is used as a reference in the THz time domain reflective spectroscopy. Therefore, the complex refractive index of the sample can be obtained by resorting to the known reflective index of the silicon and the Fresnel law. To improve the accuracy of the phase shift, the Kramers-Kronig transform is adopted. This method is also verified by the index of the silicon in THz reflection spectroscopy. The bulk metal plates have been taken as the sample, and the experimentally obtained metallic refractive indexes are compared with the simple Drude model.

  3. Corneal refractive index-hydration relationship by objective refractometry.

    Science.gov (United States)

    Patel, Sudi; Alió, Jorge L

    2012-11-01

    To compare an objective (VCH-1) with a manual subjective Abbé refractometer (MSAR) and evaluate the refractive index (RI)-hydration (H) relationship for the corneal stroma. Epithelial and endothelial layers were removed from a fresh postmortem ovine corneal buttons. RI was measured at both surfaces using (i) MSAR then (ii) VCH-1. The sample was weighed, slowly dehydrated under controlled conditions (2 h), and RI measures were repeated. Sample was oven dried (90°C) for 3 d to obtain dry weight and hydration at each episode of RI measurement. Average difference between individual pairs of measurements obtained using the two refractometers (ΔRI) was 0.00071 (standard deviation ± 0.0029, 95% confidence interval ± 0.0058). Root mean square difference between measurements obtained by the refractometers was 0.0024. There was no relationship between ΔRI and the mean of each measurement pair (r = 0.201, n = 40, p = 0.214). Linear regression revealed a significant relationship between RI and reciprocal of H at both surfaces as follows: anterior (i) RI = 1.355 + 0.111/H (r = -0.852, n = 20, p = <0.001), (ii) RI = 1.357 + 0.105/H (r = -0.849, n = 20, p = <0.001) and posterior (i) RI = 1.353 + 0.085/H (r = -0.882, n = 20, p = <0.001), (ii) RI = 1.350 + 0.088/H (r = -0.813, n = 20, p = <0.001). VCH-1 measurements are in good agreement with MSAR. RI at the anterior stroma was consistently higher suggesting hydration is lower by 1.10 units (6%) compared with the posterior stroma. Dehydration increased RI at both surfaces by similar rates. Current hypothetical models are useful for predicting RI from H for the posterior, but not the anterior, stroma.

  4. Terahertz multi-metal-wire hybrid-cladding hollow waveguide for refractive index sensing

    Science.gov (United States)

    Ying-Ying, Yu; Xu-You, Li; Kun-Peng, He; Bo, Sun

    2016-02-01

    We propose a design of terahertz refractive index sensing based on the multi-metal-wire (MMW) hybrid-cladding hollow waveguide. The proposed terahertz hybrid-cladding hollow waveguide comprises one air core in the center surrounding MMW surrounded dielectric. The central air core is used for filling lossless measurands and transmitting terahertz light. In particular, the refractive index sensing is realized by measuring the mode field area (MFA) variation of radially polarized mode. The modal effective refractive index, mode field intensity distribution, and mode field area properties responding to the measurand refractive indexes for different operating frequencies and structure dimensions are investigated, respectively. Simulations show that the proposed terahertz refractive index sensor can realize easily the measurement of the measurand refractive index. Meanwhile, the effects of operating frequency and structure parameters on sensitivity and measurement accuracy are also studied. In view of the trade-off between sensitivity and measurement accuracy, the reasonable choice of the operating frequency and structure parameters can optimize appropriately the sensitivity and measurement accuracy, and the sensitivity can reach approximately 0.585 mm2/RIU (RIU is short for refraction index units) with the proper frequency and structure parameter. Project supported by the National Natural Science Foundation of China (Grant No. 51309059).

  5. Refractive Index Change and Color Center Formation in LiYF_4 Crystal Induced by a Femtosecond Laser

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    The refractive index change and color centers formation in LiYF4 crystal at room temperature are induced by a femtosecond laser irradiation. A mechanism for refractive index change and color centers formation is proposed.

  6. Refractive Index Change and Color Center Formation in LiYF4 Crystal Induced by a Femtosecond Laser

    Institute of Scientific and Technical Information of China (English)

    Quanzhong Zhao; Jianrong Qiu; Lüyun Yang; Xiongwei Jiang; Congshan Zhu

    2003-01-01

    The refractive index change and color centers formation in LiYF4 crystal at room temperature are induced by a femtosecond laser irradiation. A mechanism for refractive index change and color centers formation is proposed.

  7. Complex refractive index of aerosols during LACE 98 as derived from the analysis of individual particles

    Science.gov (United States)

    Ebert, , M.; Weinbruch, , S.; Rausch, , A.; Gorzawski, , G.; Helas, , G.; Hoffmann, , P.; Wex, H.

    2002-11-01

    During the Lindenberger Aerosol Characterization Experiment (LACE 98), impactor sampling of aerosol particles in the size range of 0.1 to 25 μm was performed. The atmospheric concentrations of the elements sodium to lead (11 ≤ Z ≤ 83) were determined by total reflection X-ray fluorescence analysis. Approximately 15,500 individual particles were examined by high-resolution scanning electron microscopy and energy-dispersive X-ray microanalysis, and about 3800 particles were examined by transmission electron microscopy combined with energy-dispersive X-ray microanalysis. On the basis of morphology and chemical composition the particles were classified into 10 different groups: ammonium sulfates, calcium sulfates, sea salt, metal oxides/hydroxides, carbonates, silicates, soot, biological particles, carbon/sulfate mixed particles, and rest of carbon-rich particles Crest. The phases present in the different particle groups were determined by selected area electron diffraction in the transmission electron microscope. In addition, the heterogeneous phase composition of agglomerates was studied in detail. On the basis of the size distribution and the relative abundance of the particle groups, the average and size-resolved complex refractive index of the total aerosol were calculated. The real part of the average refractive index mainly depends on the abundance of metal oxide/hydroxide particles and varied between 1.52 and 1.57 on the different sampling days. The average imaginary part varied between 0.031 and 0.057 depending on the amounts of soot and carbon/sulfate mixed particles. The average complex refractive index deduced from the analysis of individual aerosol particles is in good agreement with the results of photometer measurements of dried filter samples.

  8. Experimental characterization of negative refractive index material NRM at Ka band

    CERN Document Server

    Chatterjee, Sougata

    2016-01-01

    In this paper, we discuss the experimental characterization of a negative refractive material NRM at Ka band using LR labyrinth Ring and wire array WA. We describe in detail the the LR and wire array characterization separately, and after that the combined experimental results, for NRM are reported. The LRs analytical and simulation study is not new but design in Ka band and different experimental procedure for the characterization of the negative refractive index is the novelty of this paper. For performing a negative refractive index experiment we made prism of 150 Prism angle . We get enhanced transmittance of more than 20 dB from background, at a negative angle of refraction. The values of the negative refractive index in a band of about 1 G Hz around 31 GHz are retrieved from the experimental data.

  9. On the relationship between Bloch modes and phase-related refractive index of photonic crystals.

    Science.gov (United States)

    Sun, Guilin; Kirk, Andrew G

    2007-10-01

    It has previously been shown that the phase-related refractive index is positive in photonic crystals that display negative refraction at higher bands. We hypothesize that the phase velocity is governed by a wave that can be related to the dominant Bloch mode. This dominant wave can be identified from an approximate solution of Maxwell Equations using a homogeneously averaged dielectric constant and the dominant wavevector is related to the fundamental wavevector and the reciprocal lattice vectors. We validate this hypothesis by numerical Fourier decomposition of the field in the entire simulation domain. It confirms that for negative refraction at higher bands, the phase-related refractive index is indeed positive and differs significantly from the negative value of effective refractive index calculated from the band structure.

  10. Electromagnetic scattering by spherical negative-refractive-index particles: Low-frequency resonance and localization parameters.

    Science.gov (United States)

    Liu, Zheng; Lin, Zhifang; Chui, S T

    2004-01-01

    The Mie scattering of electromagnetic waves of wave vector k by spherical negative-refractive-index particles of radius a exhibits an unusual resonance at ka-->0. The scattering enhancement from the ka-->0 resonance is insensitive to the size of scatterers, distinct from the Mie scattering resonances from positive-refractive-index particles. For media consisting of a collection of the negative-refractive-index particles, the unusual resonance results in a significant reduction of the localization parameter, providing a possibility to reach the light localization transition by reducing the wave vector k, in analogy to electronic systems.

  11. Interferometer for Measuring Fast Changes of Refractive Index and Temperature in Transparent Liquids

    DEFF Research Database (Denmark)

    Miller, Arne; Hussmann, E. K.; McLaughlin, W. L.

    1975-01-01

    A double‐beam interferometer has been designed for detecting changes of refractive index in transparent liquids associated with the absorption of ionizing radiation energy, due to short electron beam pulses from an accelerator. The response time of the interferometer is less than 0.2 μsec......, and refractive index changes of the order of 10−7 can be measured, corresponding to a temperature change of ∼10−3  °C and an absorbed dose in water of ∼350 rad. The interferometer can be used as either a real‐time or integrating radiation dosimeter, if the temperature coefficient of the refractive index (dn...

  12. Refractive index dispersion sensing using an array of photonic crystal resonant reflectors

    DEFF Research Database (Denmark)

    Hermannsson, Pétur Gordon; Vannahme, Christoph; Smith, Cameron

    2015-01-01

    Refractive index sensing plays a key role in various environmental and biological sensing applications. Here, a method is presented for measuring the absolute refractive index dispersion of liquids using an array of photonic crystal resonant reflectors of varying periods. It is shown...... that by covering the array with a sample liquid and measuring the resonance wavelength associated with transverse electric polarized quasi guided modes as a function of period, the refractive index dispersion of the liquid can be accurately obtained using an analytical expression. This method is compact, can...

  13. Pump-induced refractive index modulation and dispersions in Er3+-doped fibers

    DEFF Research Database (Denmark)

    Thirstrup, Carsten; Shi, Yuan

    1996-01-01

    A novel measurement system provides determination of pump induced phase shifts in erbium doped fibers with an accuracy of ~π/20. Using this system, a systematical analysis of the pump induced modulation of the refractive index and dispersions for a signal at 1550 nm and a pump at 980 nm is reported....... The analysis contains measurements of pump induced refractive index changes as function of wavelength, pump power, and doping concentration. A model taking account of the contribution to the refractive index changes from optical transitions between 4 I15/2 states and 4I13/2 states in Er3+ yields good agreement...

  14. Z-scan measurement of the nonlinear refractive index of graphene.

    Science.gov (United States)

    Zhang, Han; Virally, Stéphane; Bao, Qiaoliang; Ping, Loh Kian; Massar, Serge; Godbout, Nicolas; Kockaert, Pascal

    2012-06-01

    Under strong laser illumination, few-layer graphene exhibits both a transmittance increase due to saturable absorption and a nonlinear phase shift. Here, we unambiguously distinguish these two nonlinear optical effects and identify both real and imaginary parts of the complex nonlinear refractive index of graphene. We show that graphene possesses a giant nonlinear refractive index n(2)≃10(-7) cm(2) W(-1), almost 9 orders of magnitude larger than bulk dielectrics. We find that the nonlinear refractive index decreases with increasing excitation flux but slower than the absorption. This suggests that graphene may be a very promising nonlinear medium, paving the way for graphene-based nonlinear photonics.

  15. Mechanisms of the refractive index change in DO11/PMMA due to photodegradation

    CERN Document Server

    Anderson, Benjamin R

    2014-01-01

    Using a white light interferometric microscope (WLIM) we measure the photodamage induced change in the complex index of refraction of disperse orange 11 (DO11) dye-doped (poly)methyl-methacrylate. We find that the change in the imaginary part of the refractive index is consistent with previous measurements of photodamage-induced absorbance change. Additionally, we find that the change in the real refractive index can be separated into a component due to damage to the dye molecules and a component due to irreversible damage to the polymer.

  16. Satisfiability with Index Dependency

    Institute of Scientific and Technical Information of China (English)

    Hong-Yu Liang; Jing He

    2012-01-01

    We study the Boolean satisfiability problem (SAT) restricted on input formulas for which there are linear arithmetic constraints imposed on the indices of variables occurring in the same clause.This can be seen as a structural counterpart of Schaefer's dichotomy theorem which studies the SAT problem with additional constraints on the assigned values of variables in the same clause.More precisely,let k-SAT(m,A) denote the SAT problem restricted on instances of k-CNF formulas,in every clause of which the indices of the last k-m variables are totally decided by the first m ones through some linear equations chosen from A.For example,if A contains i3 =i1+2i2 and i4 =i2-i1 + 1,then a clause of the input to 4-SAT(2,A) has the form yi1∨yi2∨yi1+2i2∨yi2-i1+1,with yi being xi or (xi).We obtain the following results:1) If m ≥2,then for any set A of linear constraints,the restricted problem k-SAT(m,A) is either in P or NP-complete assuming P ≠ NP.Moreover,the corresponding #SAT problem is always #P-complete,and the MAx-SAT problem does not allow a polynomial time approximation scheme assuming P ≠ NP.2) m =1,that is,in every clause only one index can be chosen freely.In this case,we develop a general framework together with some techniques for designing polynomial-time algorithms for the restricted SAT problems.Using these,we prove that for any A,#2-SAT(1,A) and MAX-2-SAT(1,A) are both polynomial-time solvable,which is in sharp contrast with the hardness results of general #2-SAT and MAX-2-SAT.For fixed k≥ 3,we obtain a large class of non-trivial constraints A,under which the problems k-SAT(1,A),#k-SAT(1,A)and MAx-k-SAT(1,A) can all be solved in polynomial time or quasi-polynomial time.

  17. TAKE, development of the refractive index measurement technology for industrial needs; TAKE, taitekerroinmittaustekniikan kehittaeminen teollisuuden tarpeisiin - MPKT 12

    Energy Technology Data Exchange (ETDEWEB)

    Raety, J. [Oulu Univ. (Finland)

    1998-12-31

    Refractive index is one of the basic physical phenomena of materials. Traditional refractive index measurement has been widely used e.g. In research, in quality inspection of products and raw materials. It is also used for follow up of the different industrial processes. A measuring and research environment, by which it is possible to determine the complex refractive index of liquid samples, was developed in 1996 at the Measuring Instrument laboratory of the University of Oulu. This equipment, based on the reflectance of light measures both the refractive index and absorption factor of liquids simultaneously. While the commercial refractometers are best suitable for research of clear liquids, by the developed equipment it is possible to investigate by the side of clear fluids also dark strongly light absorbing samples. The measuring wave length can be chosen continuously inside the UV-Visual range. The knowing of the wave-length dependence of the complex refractive index gives additional information on the state of the fluid under inspection. The main objective of the task is to solve measuring problems of biotechnology, food industry and forest industry by a new type of refractometric method. This means the simultaneous measurement of refractive index and absorption, and the utilisation of this knowledge in wide spectral region. A refractometer, based on the technology, suitable for applied research of new measuring targets will be designed and constructed in the research. The above mentioned goals also require the survey of the present situation of the refractometry. This one and a half year project will be started in spring 1998. (orig.)

  18. Determination of refractive index of a simple negative, positive, or zero power lens using wedged plated interferometer

    Science.gov (United States)

    Shukla, R. P.; Perera, G. M.; George, M. C.; Venkateswarlu, P.

    1990-01-01

    A nondestructive technique for measuring the refractive index of a negative lens using a wedged plate interferometer is described. The method can be also used for measuring the refractive index of convex or zero power lenses. Schematic diagrams are presented for the use of a wedged plate interferometer for measuring the refractive index of a concave lens and of a convex lens.

  19. Invertebrate superposition eyes-structures that behave like metamaterial with negative refractive index

    NARCIS (Netherlands)

    Stavenga, D. G.

    2006-01-01

    The superposition eyes of moths and lobsters are described with the geometrical optics for a refractive surface between two media, where the refractive index of the image space is negative. Consequently, the eye power and the object focal length are negative, whereas the image focal length is positi

  20. Transmittance and Refractive Index of the Lanthanum Strontium Aluminium Tantalum Oxide Crystal

    Institute of Scientific and Technical Information of China (English)

    HU Bo-Qing; WANG Xiao-Ming; ZHOU Tang; ZHAO Zong-Yuan; WU Xing; CHEN Xiao-Long

    2001-01-01

    The lanthanum strontium aluminium tantalum oxide (LSAT) crystal is grown by means of a floating or pulling method. Its optical transmittance, refractive indices in visible and near-infrared areas and its dispersion curve are reported. The transparence range of LSAT is from 0.45 to 4.2μm and its refractive index is 2.0244.

  1. Invertebrate superposition eyes-structures that behave like metamaterial with negative refractive index

    NARCIS (Netherlands)

    Stavenga, D. G.

    2006-01-01

    The superposition eyes of moths and lobsters are described with the geometrical optics for a refractive surface between two media, where the refractive index of the image space is negative. Consequently, the eye power and the object focal length are negative, whereas the image focal length is

  2. Simulation of imperfections in plastic lenses - transferring local refractive index changes into surface shape modifications

    Science.gov (United States)

    Arasa, Josep; Pizarro, Carles; Blanco, Patricia

    2016-06-01

    Injection molded plastic lenses have continuously improved their performance regarding optical quality and nowadays are as usual as glass lenses in image forming devices. However, during the manufacturing process unavoidable fluctuations in material density occur, resulting in local changes in the distribution of refractive index, which degrade the imaging properties of the polymer lens. Such material density fluctuations correlate to phase delays, which opens a path for their mapping. However, it is difficult to transfer the measured variations in refractive index into conventional optical simulation tool. Thus, we propose a method to convert the local variations in refractive index into local changes of one surface of the lens, which can then be described as a free-form surface, easy to introduce in conventional simulation tools. The proposed method was tested on a commercial gradient index (GRIN) lens for a set of six different object positions, using the MTF sagittal and tangential cuts to compare the differences between the real lens and a lens with homogenous refractive index, and the last surface converted into a free-form shape containing the internal refractive index changes. The same procedure was used to reproduce the local refractive index changes of an injected plastic lens with local index changes measured using an in-house built polariscopic arrangement, showing the capability of the method to provide successful results.

  3. Geometric mechanics of ray optics as particle dynamics: refraction index with cylindrical symmetry

    Science.gov (United States)

    Cortés, Emilio; Ruiz, Melina

    2017-09-01

    Starting from the Fermat principle of geometrical optics, we analyse the ray dynamics in a graded refractive index system device with cylindrical symmetry and a refractive index that decreases parabolically with the radial coordinate. By applying Hamiltonian dynamics to the study of the ray path we obtain the strict equivalence of this optical system with the dynamics of a particle with an equivalent mass moving in a potential function that may exhibit a well, depending on the value of some associated parameters. We analyse the features of this potential function as well as the energy values and the symmetries of the system and see that both the azimuthal and axial components of the optical conjugate momentum are two constants of motion. The phase space relation for the momentum radial component is obtained analytically, and then we can obtain the components of the momentum vector at any point, given the value of the radial coordinate, and from this we have the direction of the ray. We discuss the optical path length as an action functional and we can evaluate this stationary path, with initial and final arbitrary points, as a line integral of the optical momentum, by showing that this momentum is a conservative vector field. We integrate the equations of motion numerically and obtain different ray paths which depend on the initial conditions. We believe that with this work the physics student will appreciate very clearly the close connection between geometrical optics and particle Hamiltonian dynamics.

  4. Refractive index modulation in the polyurethane films containing diazo sulfonamide chromophores

    Energy Technology Data Exchange (ETDEWEB)

    Ortyl, E. [Insitute of Organic and Polymer Technology, WrocIaw University of Technology, 50-384 WrocIaw (Poland); Kucharski, S. [Insitute of Organic and Polymer Technology, WrocIaw University of Technology, 50-384 WrocIaw (Poland)]. E-mail: stanislaw.kucharski@pwr.wroc.pl; Gotszalk, T. [Faculty of Microsystem Electronics and Photonics, WrocIaw University of Technology, 50-384 WrocIaw (Poland)

    2005-05-23

    The series of photochromic polyurethanes was obtained by modification of precursor polymers prepared from 4,4'-diphenylmethane diisocyanate (MDI), hexamethylene 1,6-diisocyanate (HDI) or toluene 2,4-diisocyanate (TDI) and N,N'-di-(2-hydroxyethyl) aniline. The precursor polymers were functionalized by an azo-coupling reaction to form the polymers with different degrees of functionalization and various heterocyclic sulfonamide groups. Ellipsometric measurements showed a decrease of the refractive index during illumination of thin polymer films with white light. The change of real part of the refractive index was in the range of 0.0033-0.0296 depending on the polymer kind and chromophore content. It was found that photocurrent was generated in the polymer films deposited onto indium tin oxide (ITO) glass plates. For the polyurethanes containing sulfathiazole groups in side chains the current density was up to 180 nA/cm{sup 2}. The formation of diffraction grating in the polymer films was easily achieved using linearly polarized laser light (532 nm) in a standard two beam coupling (TBC) system. The diffraction efficiency of the first diffraction beam was dependent on the chromophore content reaching ca. 12% for the derivatives of sulfamethoxazole.

  5. Long period fiber grating based refractive index sensor with enhanced sensitivity using Michelson interferometric arrangement

    Science.gov (United States)

    Singh, Amit

    2015-06-01

    The long period fiber grating (LPFG) is widely used as a sensor due to its high sensitivity and resolution. However, the broad bandwidth of the attenuation bands formed by the mode coupling between the fundamental core mode and the cladding modes constitutes a difficulty when the device is used as a conventional sensor. To overcome this limitation, a Michelson interferometer-type sensor configuration has been developed, using an LPFG grating pair formed by coating a mirror at the distal end of the LPFG. This sensor configuration is more convenient to use and is able to overcome the limitations of the single LPFG based sensor as the shifts in the attenuation bands being more easily detectable due to the formation of the sharp spectral fringe pattern in the LPFG based Michelson interferometer. In this work, I studied the LPFG based Michelson interferometer as the refractive index sensor and discussed the sensitivity enhancement of the LPFG based Michelson interferometer as a refractive index sensor by employing higher order cladding modes and by reducing the cladding radius. The results demonstrated the HE17 mode with a cladding radius of 62.5 μm, in the range of surrounding refractive index (SRI) of 1-1.45, and its resonant peak showed a wavelength shift of 26.99 nm/RIU. When the cladding region was further reduced to 24 μm, the resonant peak showed a wavelength shift of 569.88 nm/RIU, resulting in a sensitivity enhancement of nearly 21 times. However, as the cladding region was etched further, then the HE17 order cladding mode and higher mode would be cut off. Therefore, the implementation of high sensitivity for SRI sensing with the reduced cladding in the LPFG based Michelson interferometer is dependent on the proper combination of the cladding radius and cladding mode order.

  6. Optical flat bands in 2D waveguide arrays with alternating sign of refraction index

    Science.gov (United States)

    Maimistov, A. I.; Gabitov, I. R.

    2016-05-01

    We consider the coupled forward and backward waves propagating in two dimensional array of waveguide, which are featured by a positive and negative refraction indexes. The existence of the flat band under certain conditions is demonstrated.

  7. Refractive index engineering of high performance coupler for compact photonic integrated circuits

    Science.gov (United States)

    Liu, Lu; Zhou, Zhiping

    2017-04-01

    High performance couplers are highly desired in many applications, but the design is limited by nearly unchangeable material refractive index. To tackle this issue, refractive index engineering method is investigated, which can be realized by subwavelength grating. Subwavelength gratings are periodical structures with pitches small enough to locally synthesize the refractive index of photonic waveguides, which allows direct control of optical profile as well as easier fabrication process. This review provides an introduction to the basics of subwavelength structures and pay special attention to the design strategies of some representative examples of subwavelength grating devices, including: edge couplers, fiber-chip grating couplers, directional couplers and multimode interference couplers. Benefited from the subwavelength grating which can engineer the refractive index as well as birefringence and dispersion, these devices show better performance when compared to their conventional counterparts.

  8. Qualitative Analysis of Relationship between Refractive Index and Atomic Parameters of Solid Materials

    Institute of Scientific and Technical Information of China (English)

    罗遵度; 黄艺东

    2004-01-01

    The refractive index is one of the important parameters describing the optical properties of solid materials. However, it is difficult to obtain a quantitative relation between the refractive index and the structure and composition of materials. A qualitative relation between the refractive index and some atomic parameters of materials was proposed and demonstrated by some oxide optical crystals. A parameter P=r-/F=r-/(r+ΔxD) is defined, in which Δx is the difference of the electronegativities between cations and anions in the materials and r+ and r- are the radii of cations and anions respectively. On the other hand, the factor D was introduced to describe the effect of mass difference of the ions. It is demonstrated by both theoretical discussion and experimental data that refractive index is a decreasing function of parameter P. The relation may be useful for the investigation of optical materials.

  9. Fabrication and Determination of Refractive Index Profile of the Planar Waveguides by Wedge Technique

    Institute of Scientific and Technical Information of China (English)

    S.; M.; R.; Sadat; Hosseini; A.; Darudi

    2003-01-01

    Several planar waveguides have been fabricated. The waveguides have been polished for determination of their refractive index profiles (RIP) by wedge method. The RIP determined by inserting the sample in a Mach-Zehnder interferometer and applying fringe analysis methods.

  10. Single-Mode Optical Waveguides on Native High-Refractive-Index Substrates

    CERN Document Server

    Grote, Richard R

    2016-01-01

    High-refractive-index semiconductor optical waveguides form the basis for modern photonic integrated circuits (PICs) , but the conventional methods of achieving optical confinement require a thick lower-refractive-index support layer that impedes large-scale co-integration with electronics. To address this challenge, we present a general architecture for single-mode waveguides that confine light in a high-refractive-index material on a native substrate. Our waveguide consists of a high-aspect-ratio fin of the guiding material surrounded by lower-refractive-index dielectrics and is compatible with standard top-down fabrication techniques. The proposed waveguide geometry removes the need for a buried-oxide-layer in silicon photonics, as well as the InGaAsP layer in InP-based PICs and will allow for photonic integration on emerging material platforms such as diamond and SiC.

  11. Study of the refractive index of gasoline+alcohol pseudo-binary mixtures

    Directory of Open Access Journals (Sweden)

    Nita Irina

    2017-02-01

    Full Text Available The properties of gasoline change as a result of blending with a bioalcohol, affecting the behavior of the pseudo-binary system. The aim of this paper is to present experimental data of the refractive index for pseudobinary mixtures of a reformate gasoline with ethanol, isopropanol and n-butanol over the entire composition range and for temperature ranging from 293.15 K to 313.15 K. The accuracy of different equations to predict the refractive index of the mixtures was tested. The best prediction accuracy (the lower AAD corresponded to Eykman and Lorentz-Lorenz mixing rules. A logarithmic equation proposed to correlate the refractive index with composition and temperature of gasoline+alcohol mixtures showed a good accuracy (the absolute average deviation AAD < 0.052%. The deviations in refractive index for investigated systems are negative over the entire composition range and at all investigated temperatures.

  12. Simulation of Optical Microfiber Loop Resonators for Ambient Refractive Index Sensing

    Directory of Open Access Journals (Sweden)

    Xianfeng Chen

    2007-05-01

    Full Text Available Based on theoretical modeling and optimization, we exploit the application ofoptical microfiber loop resonators in ambient refractive index sensing. We set up a reliabletheoretical model and optimize the structural parameters of microfiber loop resonatorsincluding the radius of the microrfiber, the radius of the loop and the length of the couplingregion for higher sensitivity, wider dynamic measurement range, and lower detection limit.To show the convincible and realizable sensing ability we perform the simulation ofsensing an extreme small variation of ambient refractive index by employing a set ofexperimental data as the parameters in the expression of intensity transmission coefficient,and the detection limit reaches to a variation of ambient refractive index of 10-5 refractiveindex unit (RIU. This has superiority over the existing evanescent field-basedsubwavelength-diameter optical fiber refractive index sensor.

  13. Method for engineering of refraction index profile of circular crosssection waveguide

    Directory of Open Access Journals (Sweden)

    V. G. Levandovskyy

    2009-10-01

    Full Text Available Engineering method for circular cross-section waveguide refraction index profile is proposed. Mathematical apparatus of Gel’fund-Levitan-Martchenko for solving of inverse scattering problem of nonrelativistic quantum mechanic been used.

  14. Simultaneous measurement of refractive index distribution and topography by integrated transmission and reflection digital holographic microscopy.

    Science.gov (United States)

    Ma, Chaojie; Di, Jianglei; Zhang, Jiwei; Li, Ying; Xi, Teli; Li, Enpu; Zhao, Jianlin

    2016-11-20

    We propose a method for simultaneously measuring dynamic changes of the refractive index distribution and surface topography, which integrates the transmission and reflection digital holographic microscopy based on polarization and angular multiplexing techniques. The complex amplitudes of the transmitted and reflected object waves can be simultaneously retrieved. The phase information of the reflected object wave is directly used to determine the topography of the specimen which corresponds to its physical thickness. Assuming that the refractive index distribution is uniform in the direction of the specimen thickness, the refractive index distribution can be deduced from the phase distributions of the transmitted and reflected object waves without any approximation. The refractive index distribution and dynamic changes of the topography of a tiny deionized water droplet have been measured for the availability of the proposed method.

  15. A Refractive Index Sensor Based on the Resonant Coupling to Cladding Modes in a Fiber Loop

    Science.gov (United States)

    Reyes, Mauricio; Monzón-Hernández, David; Martínez-Ríos, Alejandro; Silvestre, Enrique; Díez, Antonio; Cruz, José Luis; Andrés, Miguel V.

    2013-01-01

    We report an easy-to-build, compact, and low-cost optical fiber refractive index sensor. It consists of a single fiber loop whose transmission spectra exhibit a series of notches produced by the resonant coupling between the fundamental mode and the cladding modes in a uniformly bent fiber. The wavelength of the notches, distributed in a wavelength span from 1,400 to 1,700 nm, can be tuned by adjusting the diameter of the fiber loop and are sensitive to refractive index changes of the external medium. Sensitivities of 170 and 800 nm per refractive index unit for water solutions and for the refractive index interval 1.40–1.442, respectively, are demonstrated. We estimate a long range resolution of 3 × 10−4 and a short range resolution of 2 × 10−5 for water solutions. PMID:23979478

  16. Numerical analysis of nonlinear multimode interference waveguide as a refractive index sensor

    Science.gov (United States)

    Yeoh, Stephenie; Mutter, Kussay Nugamesh; Mat Jafri, Mohd. Zubir

    2017-06-01

    A numerical analysis of a refractive index sensor based on multimode interference (MMI) waveguide has been performed in this paper. The nonlinear refractive index of graphene in the proposed sensor was investigated by applying external electric field on the graphene cladding layer. The designed waveguide was constructed using silicon oxide (SiO2) as substrate and silicon as a core while graphene is coated on top of the waveguide slab. The response of the sensor in the output power was examined and validated by changing liquid samples with different refractive index. The guided modes of the 1550 nm input plane source at the absence of external electric field were used as the initial reference point. It is found that there was a threshold magnitude of the field which makes graphene sensitive to the relative change in the refractive index of the solution. The output results showed a promising indication that this design is appropriate for environmental monitoring.

  17. Reflectivity enhanced refractive index sensor based on a fiber-integrated Fabry-Perot microresonator.

    Science.gov (United States)

    Wieduwilt, T; Dellith, J; Talkenberg, F; Bartelt, H; Schmidt, M A

    2014-10-20

    We discuss a fiber-integrated refractive index sensor with strongly improved detection performance. The resonator has been implemented by means of focused-ion beam milling of a step index fiber and shows a sensitivity of about 1.15µm/RIU. Coating the resonator walls led to a strongly improved mirror reflectivity by a factor of about 26. Design rules for device optimization and a detailed mathematical analysis are discussed, revealing that the sensor operates as an optimized Fabry-Perot resonator. We also show that the performance of such kind of Fabry-Perot sensors is, in general, limited by the detection limit function - a quantity depending on the cavitiy's finesse and on the measurement capabilities used.

  18. Spin angular momentum transfer from TEM(00) focused Gaussian beams to negative refractive index spherical particles.

    Science.gov (United States)

    Ambrosio, Leonardo A; Hernández-Figueroa, Hugo E

    2011-08-01

    We investigate optical torques over absorbent negative refractive index spherical scatterers under the influence of linear and circularly polarized TEM(00) focused Gaussian beams, in the framework of the generalized Lorenz-Mie theory with the integral localized approximation. The fundamental differences between optical torques due to spin angular momentum transfer in positive and negative refractive index optical trapping are outlined, revealing the effect of the Mie scattering coefficients in one of the most fundamental properties in optical trapping systems.

  19. Theory of negative-refractive-index response of double-fishnet structures.

    Science.gov (United States)

    Mary, A; Rodrigo, Sergio G; Garcia-Vidal, F J; Martin-Moreno, L

    2008-09-05

    A theory is presented of the negative refractive index observed in the so-called double-fishnet structures. We find that the electrical response of these structures is dominated by the cutoff frequency of the hole waveguide whereas the resonant magnetic response is due to the excitation of gap surface plasmon polaritons propagating along the dielectric slab. Associated with this origin, we show how the negative refractive index in these metamaterials presents strong dispersion with the parallel momentum of the incident light.

  20. Measurement of high order Kerr refractive index of major air components.

    Science.gov (United States)

    Loriot, V; Hertz, E; Faucher, O; Lavorel, B

    2009-08-03

    We measure the instantaneous electronic nonlinear refractive index of N(2), O(2) and Ar at room temperature for a 90 fs and 800 nm laser pulse. Measurements are calibrated by post-pulse molecular alignment through a polarization technique. At low intensity, quadratic coefficients n(2) are determined. At higher intensities, a strong negative contribution with a higher nonlinearity appears, which leads to an overall negative nonlinear Kerr refractive index in air above 26 TW/cm(2).

  1. Periodic refractive index modifications inscribed in polymer optical fibre by focussed IR femtosecond pulses

    DEFF Research Database (Denmark)

    Stecher, Matthias; Williams, Robert J.; Bang, Ole

    Focussed femtosecond laser pulses were used to inscribe a periodic array of modifications in the core of a polymer optical fibre. Structural and refractive-index modifications have been observed at different pulse energies using DIC microscopy.......Focussed femtosecond laser pulses were used to inscribe a periodic array of modifications in the core of a polymer optical fibre. Structural and refractive-index modifications have been observed at different pulse energies using DIC microscopy....

  2. Femtosecond laser induced refractive index structures in polymer optical fibre (POF) for sensing

    Science.gov (United States)

    Liang, S. J.; Scully, P. J.; Schille, J.; Vaughan, J.; Perrie, W.

    2009-10-01

    Techniques to directly write localised refractive index structures in polymer optical fibres (POF) are presented, using UV (400nm) ultrafast laser with pulse lengths of 100 fs to create in-fibre gratings for sensing. No doping is necessary for photosensitisation so commercially available POF is used. An in-fibre grating consisting of a 1.8 μm wide refractive index structure with a periodicity of 189 nm was demonstrated in single mode polymer fibre with optimised laser processing parameters.

  3. A study of energy gap, refractive index and electronic polarizability of ternary chalcopyrite semiconductors

    Directory of Open Access Journals (Sweden)

    A Ahmad

    2014-12-01

    Full Text Available A simple relation between the optical electronegativity, energy gap, refractive index and electronic polarizability is given for ternary chalcopyrite semiconductors. Energy gap has been evaluated from the optical electronegativity whereas refractive index and electronic polarizability values have been evaluated from the energy gap by proposing a linear relation between them. The calculated values are in fair agreement with the experimental values and earlier researchers. This work highlights the significance of interrelation between these parameters.

  4. Photoinduced changes in refractive index of nanostructured shungite-containing polyimide systems

    Science.gov (United States)

    Kamanina, N. V.; Serov, S. V.; Shurpo, N. A.; Rozhkova, N. N.

    2011-10-01

    Photoinduced changes in the refractive index of a conjugate polyimide (PI) matrix sensitized by shungite carbon nanoparticles have been studied for the first time. The results are compared to the data of previous investigations of the photorefractive properties of PI matrices doped with fullerenes, carbon nanotubes, and quantum dots. The nonlinear refractive index of the proposed material has been determined using the dynamic holography techniques. The position of conjugate polymer materials of this type among the other nonlinear optical systems is considered.

  5. High-Resolution Plasmonic Refractive-Index Sensor Based on a Metal-Insulator-Metal Structure

    Institute of Scientific and Technical Information of China (English)

    ZHU Jia-Hu; HUANG Xu-Guang; MEI Xian

    2011-01-01

    @@ A high-resolution plasmonic refractive-index sensor based on a metal-insulator-metal structure consisting of a straight bus waveguide and a resonator waveguide is proposed and numerically simulated by using the finite difference time domain method under a perfectly matched layer absorbing boundary condition.Both analytic and simulated results show that the resonant wavelengths of the sensor have a linear relationship with the refractive index of material under sensing.Based on the relationship,the refractive index of the material can be obtained from the detection of one of the resonant wavelengths.The resolution of refractive index of the nanometeric plasmonic sensor can reach as high as 10-6,giving the wavelength resolution of 0.01 nm.It could be applied to highly-resolution biological sensing.%A high-resolution plasmonic refractive-index sensor based on a metal-insulator-metal structure consisting of a straight bus waveguide and a resonator waveguide is proposed and numerically simulated by using the finite difference time domain method under a perfectly matcted layer absorbing boundary conditition. Both analytic and simulated results show that the resonant wavelengths of the sensor have a linear relationship with the refractive index of material under sensing. Based on the relationship, the refractive index of the material can be obtained from the detection of one of the resonant wavelengths. The resolutio of refractive index of the nanometeric plasmonic sensor can reach as high as 1O-6, giving the wavelength resolution of 0.01 nm. It could be applied to highly- resolution biological sensing.

  6. Refractive Index and Wave Resistance of Homogeneous Plane Waves in Isotropic Media with Losses and Gain

    Science.gov (United States)

    Fisanov, V. V.

    2017-09-01

    Analytical expressions for complex values of the wave number, refractive index, and the characteristic wave impedance of homogeneous electromagnetic plane waves propagating in a linear, homogeneous, isotropic medium with losses and gain are derived. Formulas for determining the type of normal wave as a function of the values of the real and imaginary parts of the permittivity and permeability are obtained, and conditions for the appearance of positive and negative refraction at the interface of two isotropic media are indicated. In the approach applied here, the concept of a negative refractive index is not used.

  7. Miniaturized Fiber-Optic Fabry-Perot Interferometer for Highly Sensitive Refractive Index Measurement

    Institute of Scientific and Technical Information of China (English)

    Ming Deng; Tao Zhu; Yun-Jiang Rao; Hong Li

    2008-01-01

    This paper presents a novel miniaturized fiber-optic Fabry-Peort interferometer (FPI) for highly sensitive refractive index measurement. This device was tested for the refractive indices of various liquids including acetone and ethanol at room temperature. The sensitivity for measurement of refractive index change of ethanol is 1138 nm/RIU at the wavelength of 1550 nm. In addition, the sensor fabrication is simple including only cleaving, splicing, and etching. The signal is stable with high visibility. Therefore, it provides a valuable tool in biological and chemical applications.

  8. Highly Sensitive Refractive Index Sensor Based on Adiabatically Tapered Microfiber Long Period Gratings

    Directory of Open Access Journals (Sweden)

    Choong Leng Ng

    2013-10-01

    Full Text Available We demonstrate a refractive index sensor based on a long period grating (LPG inscribed in a special photosensitive microfiber with double-clad profile. The fiber is tapered gradually enough to ensure the adiabaticity of the fiber taper. In other words, the resulting insertion loss is sufficiently small. The boron and germanium co-doped inner cladding makes it suitable for inscribing gratings into its tapered form. The manner of wavelength shift for refractive indices (RIs differs from conventional LPG, and the refractive index detection limit is 1.67 × 10−5.

  9. Quantification of nanoscale nuclear refractive index changes during the cell cycle

    Science.gov (United States)

    Bista, Rajan K.; Uttam, Shikhar; Wang, Pin; Staton, Kevin; Choi, Serah; Bakkenist, Christopher J.; Hartman, Douglas J.; Brand, Randall E.; Liu, Yang

    2011-07-01

    Intrigued by our recent finding that the nuclear refractive index is significantly increased in malignant cells and histologically normal cells in clinical histology specimens derived from cancer patients, we sought to identify potential biological mechanisms underlying the observed phenomena. The cell cycle is an ordered series of events that describes the intervals of cell growth, DNA replication, and mitosis that precede cell division. Since abnormal cell cycles and increased proliferation are characteristic of many human cancer cells, we hypothesized that the observed increase in nuclear refractive index could be related to an abundance or accumulation of cells derived from cancer patients at a specific point or phase(s) of the cell cycle. Here we show that changes in nuclear refractive index of fixed cells are seen as synchronized populations of cells that proceed through the cell cycle, and that increased nuclear refractive index is strongly correlated with increased DNA content. We therefore propose that an abundance of cells undergoing DNA replication and mitosis may explain the increase in nuclear refractive index observed in both malignant and histologically normal cells from cancer patients. Our findings suggest that nuclear refractive index may be a novel physical parameter for early cancer detection and risk stratification.

  10. Method of determining effects of heat-induced irregular refractive index on an optical system.

    Science.gov (United States)

    Song, Xifa; Li, Lin; Huang, Yifan

    2015-09-01

    The effects of an irregular refractive index on optical performance are examined. A method was developed to express a lens's irregular refractive index distribution. An optical system and its mountings were modeled by a thermomechanical finite element (FE) program in the predicted operating temperature range, -45°C-50°C. FE outputs were elaborated using a MATLAB optimization routine; a nonlinear least squares algorithm was adopted to determine which gradient equation best fit each lens's refractive index distribution. The obtained gradient data were imported into Zemax for sequential ray-tracing analysis. The root mean square spot diameter, modulation transfer function, and diffraction ensquared energy were computed for an optical system under an irregular refractive index and under thermoelastic deformation. These properties are greatly reduced by the irregular refractive index effect, which is one-third to five-sevenths the size of the thermoelastic deformation effect. Thus, thermal analyses of optical systems should consider not only thermoelastic deformation but also refractive index irregularities caused by inhomogeneous temperature.

  11. TCF-MMF-TCF fiber structure based interferometer for refractive index sensing

    Science.gov (United States)

    Fu, Haiwei; Li, Huidong; Shao, Min; Zhao, Na; Liu, Yinggang; Li, Yan; Yan, Xu; Liu, Qinpeng

    2015-06-01

    A liquid refractive index (RI) sensor based on in-fiber Mach-Zehnder interferometer (MZI) by sandwiching multi-mode fiber (MMF) between two short sections of thinned core fiber (TCF) is proposed in this paper. The first section of TCF excites the high-order modes and the second section TCF couples the core mode and high-order modes into lead-out SMF to form intermodal interference. The sensor with MMF length of 20 mm and TCFs length of 1 mm was fabricated. The transmission spectrum variation of the sensor with respect to surrounding refractive index (SRI) has been studied by experiment. The results show that the central wavelength of dips/peaks shifting had a good linearity with SRI. The RI sensitivity of the sensor is 130.00 nm/RIU over the RI range of 1.3333-1.4182. The RI sensitivity increase to 433.60 nm/RIU after etching the MMF cladding of the sensor. The sensor keeps low dependence on temperature before and after etching.

  12. Refractive index change mechanisms in different glasses induced by femtosecond laser irradiation

    Science.gov (United States)

    Fuerbach, A.; Gross, S.; Little, D.; Arriola, A.; Ams, M.; Dekker, P.; Withford, M.

    2016-07-01

    Tightly focused femtosecond laser pulses can be used to alter the refractive index of virtually all optical glasses. As the laser-induced modification is spatially limited to the focal volume of the writing beam, this technique enables the fabrication of fully three-dimensional photonic structures and devices that are automatically embedded within the host material. While it is well understood that the laser-material interaction process is initiated by nonlinear, typically multiphoton absorption, the actual mechanism that results in an increase or sometimes decrease of the refractive index of the glass strongly depends on the composition of the material and the process parameters and is still subject to scientific studies. In this paper, we present an overview of our recent work aimed at uncovering the physical and chemical processes that contribute to the observed material modification. Raman microscopy and electron microprobe analysis was used to study the induced modifications that occur within the glass matrix and the influence of atomic species migration forced by the femtosecond laser writing beam. In particular, we concentrate on borosilicate, heavy metal fluoride and phosphate glasses. We believe that our results represent an important step towards the development of engineered glass types that are ideally suited for the fabrication of photonic devices via the femtosecond laser direct write technique.

  13. A Schrodinger formulation research for light beam propagation through the media of complex refractive index

    Institute of Scientific and Technical Information of China (English)

    刘承宜; 郭弘; 胡巍

    2002-01-01

    The Helmhotz equation of light beam propagating through a medium of complex refractive index is reduced to the axial-coordinate-dependent Schr?dinger equation of complex potential. The new bra vector, the new expectation value of a dynamical variable and the extended Heisenberg picture are defined by the inverse of the evolution operator instead of its Hermitian adjoint, and the complex beam propagation parameters defined in terms of the new expectation value, the complex ABCD law and the ABCD formulation of the Huygens' integral are discussed in terms of quantum mechanics. It is shown that the evolution equations of the complex beam propagation parameters are the same as those of the beam propagation parameters of beam propagating through a medium of real refractive index. The research on an optical system of the conservative complex beam quality factor shows that the complex ABCD law holds, the evolution of its coordinate operator and the momentum operator is linear, and the Huygens' integral is of the ABCD formulation.

  14. The Refractive Index of Curved Spacetime: the Fate of Causality in QED

    CERN Document Server

    Hollowood, Timothy J

    2007-01-01

    It has been known for a long time that vacuum polarization in QED leads to a superluminal low-frequency phase velocity for light propagating in curved spacetime. Assuming the validity of the Kramers-Kronig dispersion relation, this would imply a superluminal wavefront velocity and the violation of causality. Here, we calculate for the first time the full frequency dependence of the refractive index using world-line sigma model techniques together with the Penrose plane wave limit of spacetime in the neighbourhood of a null geodesic. We find that the high-frequency limit of the phase velocity (i.e. the wavefront velocity) is always equal to c and causality is assured. However, the Kramers-Kronig dispersion relation is violated due to a non-analyticity of the refractive index in the upper-half complex plane, whose origin may be traced to the generic focusing property of null geodesic congruences and the existence of conjugate points. This indicates a violation of micro-causality, i.e. the vanishing of commutato...

  15. The refractive index of curved spacetime: The fate of causality in QED

    Energy Technology Data Exchange (ETDEWEB)

    Hollowood, Timothy J. [Department of Physics, University of Wales Swansea, Swansea, SA2 8PP (United Kingdom)], E-mail: t.hollowood@swansea.ac.uk; Shore, Graham M. [Department of Physics, University of Wales Swansea, Swansea, SA2 8PP (United Kingdom)], E-mail: g.m.shore@swansea.ac.uk

    2008-05-21

    It has been known for a long time that vacuum polarization in QED leads to a superluminal low-frequency phase velocity for light propagating in curved spacetime. Assuming the validity of the Kramers-Kronig dispersion relation, this would imply a superluminal wavefront velocity and the violation of causality. Here, we calculate for the first time the full frequency dependence of the refractive index using world-line sigma model techniques together with the Penrose plane wave limit of spacetime in the neighbourhood of a null geodesic. We find that the high-frequency limit of the phase velocity (i.e. the wavefront velocity) is always equal to c and causality is assured. However, the Kramers-Kronig dispersion relation is violated due to a non-analyticity of the refractive index in the upper-half complex plane, whose origin may be traced to the generic focusing property of null geodesic congruences and the existence of conjugate points. This makes the issue of micro-causality, i.e. the vanishing of commutators of field operators at spacelike separated points, a subtle one in local quantum field theory in curved spacetime.

  16. Photonic band gaps in quasiperiodic photonic crystals with negative refractive index

    Science.gov (United States)

    Vasconcelos, M. S.; Mauriz, P. W.; de Medeiros, F. F.; Albuquerque, E. L.

    2007-10-01

    We investigate the photonic band gaps in quasiperiodic photonic crystals made up of both positive (SiO2) and negative refractive index materials using a theoretical model based on a transfer matrix treatment. The quasiperiodic structures are characterized by the nature of their Fourier spectrum, which can be dense pure point (Fibonacci sequences) or singular continuous (Thue-Morse and double-period sequences). These substitutional sequences are described in terms of a series of generations that obey peculiar recursion relations. We discussed the photonic band gap spectra for both the ideal cases, where the negative refractive index material can be approximated as a constant in the frequency range considered, as well as the more realistic case, taking into account the frequency-dependent electric permittivity γ and magnetic permeability μ . We also present a quantitative analysis of the results, pointing out the distribution of the allowed photonic bandwidths for high generations, which gives a good insight about their localization and power laws.

  17. Effective negative refractive index in ferromagnet-semiconductor superlattices.

    Science.gov (United States)

    Tarkanyan, Roland H; Niarchos, Dimitris G

    2006-06-12

    Problem of anomalous refraction of electromagnetic waves is analyzed in a superlattice which consists of alternating layers of ferromagnetic insulator and nonmagnetic semiconductor. Effective permittivity and permeability tensors are derived in the presence of an external magnetic field parallel to the plane of the layers. It is shown that in the case of the Voigt configuration, the structure behaves as a left-handed medium with respect to TE-type polarized wave, in the low-frequency region of propagation. The relative orientation of the Poynting vector and the refractive wave vector is examined in different frequency ranges. It is shown that the frequency region of existence for the backward mode can be changed using external magnetic field as tuning parameter.

  18. Numerical analysis of low chromatic aberration of a gradient refractive index rod lens.

    Science.gov (United States)

    Lv, Hao; Liu, Aimei; Yi, Xunong; Li, Qianguang

    2009-01-20

    The oxide compositions (OCs) model is established for discussing the chromatic aberrations of a gradient refractive index rod lens. The chromatic aberrations for Na(+)/Li(+), K(+)/Cs(+), and K(+)/Tl(+) ion exchanges are discussed based on the OC model and the Huggins-Sun-Davis (HSD) model. Theoretical results indicate that the function value mainly depends on base glass properties and the nature of exchanging ion pairs, and rarely depends on the quantity of ion exchange. Experimental results show that the chromatic aberrations using the OC model have smaller errors than with the HSD model. The estimating average errors between the OC model and the HSD model are -0.051, -0.0067, and 0.0047 for the K(+)/Tl(+), Li(+)/Na(+), and K(+)/Cs(+) ion exchanges, respectively.

  19. Analysis of transverse Anderson localization in refractive index structures with customized random potential

    CERN Document Server

    Boguslawski, Martin; Armijo, Julien; Diebel, Falko; Rose, Patrick; Denz, Cornelia

    2013-01-01

    We present a method to demonstrate Anderson localization in an optically induced randomized potential. By usage of computer controlled spatial light modulators, we are able to implement fully randomized nondiffracting beams of variable structural size in order to control the modulation length (photonic grain size) as well as the depth (disorder strength) of a random potential induced in a photorefractive crystal. In particular, we quantitatively analyze the localization length of light depending on these two parameters and find that they are crucial influencing factors on the propagation behavior leading to variably strong localization. Thus, we corroborate that transverse light localization in a random refractive index landscape strongly depends on the character of the potential, allowing for a flexible regulation of the localization strength by adapting the optical induction configuration.

  20. Sensitivity of propagation and energy deposition in femtosecond filamentation to the nonlinear refractive index

    CERN Document Server

    Rosenthal, E W; Jhajj, N; Zahedpour, S; Wahlstrand, J K; Milchberg, H M

    2014-01-01

    The axial dependence of femtosecond filamentation in air is measured under conditions of varying laser pulsewidth, energy, and focusing f-number. Filaments are characterized by the ultrafast z-dependent absorption of energy from the laser pulse and diagnosed by measuring the local single cycle acoustic wave generated. Results are compared to 2D+1 simulations of pulse propagation, whose results are highly sensitive to the instantaneous (electronic) part of the nonlinear response of $N_2$ and $O_2$. We find that recent measurements of the nonlinear refractive index ($n_2$) in [J.K. Wahlstrand et al., Phys. Rev. A. 85, 043820 (2012)] provide the best match and an excellent fit between experiments and simulations.

  1. Influence of chemical composition on the refractive index thermal coefficient of liquids

    Science.gov (United States)

    Fuller, Joseph B., Jr.; Robb, Paul N.; Sigler, Robert D.; Abramov, Alexander P.; Petrova, Maria V.; Plyakhin, Audrei G.; Tolstoy, Michael N.

    1996-11-01

    Liquids have been shown to be very effective in the design of apochromatic lenses. The incorporation of abnormal liquids is complicated by their large thermal coefficients of refractive index (dn/dT). To make a glass-liquid design thermally stable, two liquids with different dn/dT and dispersions are typically used. This paper, which extends previously reported investigations of liquid dn/dT dependencies in the visible spectrum (SPIE Volume 2512, 1995), explores the dependence of dn/DT, abnormal dispersion, and composition for a number of liquids. The optical property measurements were made at the Vavilov State Optical Institute, St. Petersburg, Russia, in collaboration with the Lockheed Martin Advanced Technology Center, Palo Alto, California.

  2. A novel approach to design microwave medium of negative refractive index and simulation verification

    Institute of Scientific and Technical Information of China (English)

    CAO YunJian; WEN GuangJun; WU KaiMin; XU XinHe

    2007-01-01

    In this paper, a novel approach is presented to synthesize microwave medium of negative refractive index by incorporating metallic wire array with negative effective permittivity into the host media such as ferrimagnet-YIG (yttrium iron garnet) applied by external magnetic field whose permeability is negative. We have designed the composite medium having negative refractive index in C/X band frequencies, analyzed and simulated its electromagnetic (EM) properties by use of EM EDA package based on time-domain finite integration method. The simulation results show that: ① the effective permittivity of the designed metallic wire array is negative in the frequency range from 7.02 GHz to 9.80 GHz; ② the permeability of YIG substrate immersed into an external magnetic field is negative in the frequency range from 5.22 GHz to 8.14 GHz; ③ EM wave can pass through the composite medium synthesized by the above designed metallic wire array and YIG substrate, and ④ the negative refraction behavior occurs on the interface between the composite medium and the normal material with positive refractive index in 7.51-8.13 GHz frequency range, in which the effective permittivity of the metallic wire array and the permeability of YIG substrate are negative simultaneously. The full wave simulation has demonstrated that the effective refractive index of the designed composite medium is indeed negative and ascertained that the proposed approach to design microwave medium with negative refractive index is viable.

  3. Resolving the wave vector in negative refractive index media.

    Science.gov (United States)

    Ramakrishna, S Anantha; Martin, Olivier J F

    2005-10-01

    We address the general issue of resolving the wave vector in complex electromagnetic media including negative refractive media. This requires us to make a physical choice of the sign of a square root imposed merely by conditions of causality. By considering the analytic behavior of the wave vector in the complex plane, it is shown that there are a total of eight physically distinct cases in the four quadrants of two Riemann sheets.

  4. Novel optical devices based on the tunable refractive index of magnetic fluid and their characteristics

    Energy Technology Data Exchange (ETDEWEB)

    Zhao Yong, E-mail: zhaoyong@ise.neu.edu.cn [College of Information Science and Engineering, Northeastern University, Shenyang 110819 (China); Zhang Yuyan [College of Information Science and Engineering, Northeastern University, Shenyang 110819 (China); Shenyang Institute of Engineering, Shenyang 110136 (China); Lv Riqing; Wang Qi [College of Information Science and Engineering, Northeastern University, Shenyang 110819 (China)

    2011-12-15

    As a new type of functional material, magnetic fluid (MF) is a stable colloid of magnetic nanoparticles, dressed with surfactant and dispersed in the carrier liquid uniformly. The MF has many unique optical properties, and the most important one is its tunable refractive index property. This paper summarizes the properties of the MF refractive index and the related optical devices. The refractive index can be easily controlled by external magnetic field, temperature, and so on. But the tunable refractive index of MF has a relaxation effect. As a result, the response time is more than milliseconds and the MF is only suitable for low speed environment. Compared with the traditional optical devices, the magnetic fluid based optical devices have the tuning ability. Compared with the tunable optical devices (the electro-optic devices (LiNbO{sub 3}) of more than 10 GHz modulation speed, acoustic-optic devices (Ge) of more than 20 MHz modulation speed), the speed of the magnetic fluid based optical devices is low. Now there are many applications of magnetic fluid based on the refractive index in the field of optical information communication and sensing technology, such as tunable beam splitter, optical-fiber modulator, tunable optical gratings, tunable optical filter, optical logic device, tunable interferometer, and electromagnetic sensor. With the development of the research and application of magnetic fluid,a new method, structure and material to improve the response time can be found, which will play an important role in the fields of optical information communication and sensing technology. - Highlights: > Magnetic fluid is a new type of functional material, which has many unique optical properties. > We summarize the tunable refractive index property and the related optical devices. > Refractive index can be easily controlled by external magnetic field, temperature and so on. > There are many applications in the field of optical communication and sensing technology

  5. [The arctic sea ice refractive index retrieval based on satellite AMSR-E observations].

    Science.gov (United States)

    Chen, Han-Yue; Bi, Hai-Bo; Niu, Zheng

    2012-11-01

    The refractive index of sea ice in the polar region is an important geophysical parameter. It is needed as a vital input for some numerical climate models and is helpful to classifying sea ice types. In the present study, according to Hong Approximation (HA), we retrieved the arctic sea ice refractive index at 6.9, 10.7, 23, 37, and 89 GHz in different arctic climatological conditions. The refractive indices of wintertime first year (FY) sea ice and summertime ice were derived with average values of 1.78 - 1.75 and 1.724 - 1.70 at different frequencies respectively, which are consistent with previous studies. However, for multiyear (MY) ice, the results indicated relatively large bias between modeled results since 10.7 GHz. At a higher frequency, there is larger MY ice refractive index difference. This bias is mainly attributed to the volume scattering effect on MY microwave radiation due to emergence of massive small empty cavities after the brine water in MY ice is discharged into sea. In addition, the retrieved sea ice refractive indices can be utilized to classify ice types (for example, the winter derivation at 89 GHz), to identify coastal polynyas (winter retrieval at 6.9 GHz), and to outline the areal extent of significantly melting marginal sea ice zone (MIZ) (summer result at 6.9 GHz). The investigation of this study suggests an effective tool of passive microwave remote sensing in monitoring sea ice refractive index variability.

  6. Measurement of optical penetration depth and refractive index of human tissue

    Institute of Scientific and Technical Information of China (English)

    Shusen Xie(谢树森); Hui Li(李晖); Buhong Li(李步洪)

    2003-01-01

    Experimental techniques for measurement of optical penetration depth and refractive index of human tissue are presented, respectively. Optical penetration depth can be obtained from the measurement of the relative fluence-depth distribution inside the target tissue. The depth of normal and carcinomatous human lung tissues irradiated with the wavelengths of 406.7, 632.8 and 674.4 nm in vitro are respectively determined. In addition, a novel simple method based on total internal reflection for measuring the refractive index of biotissue in vivo is developed, and the refractive indices of skin from people of different age, sex and skin color are measured. Their refractive indices are almost same and the average is 1.533.

  7. Probing negative refractive index of metamaterials by terahertz time-domain spectroscopy.

    Science.gov (United States)

    Han, Jiaguang

    2008-01-21

    Terahertz time-domain spectroscopy (THz-TDS) offers a new perspective for extraction of negative refractive index of low-loss metamaterials directly. We present the detailed extraction procedure how to obtain the negative refractive index of metamaterials through THz-TDS measurement. The basic equations are deduced to obtain the negative index through comparison of THz data measured for the sample and reference, respectively. Further simulation examples matching the practical experimental cases are given, which verifies that the extraction procedure is reliable. This approach demonstrates the potential use of THz-TDS in study of metamaterials and is helpful for design of metamaterial devices.

  8. Ultrasensitive refractive index sensor based on twin-core photonic bandgap fibers

    DEFF Research Database (Denmark)

    Yuan, Scott Wu; Town, Graham E.; Bang, Ole

    We have theoretically investigated twin-core all-solid photonic bandgap fibers (PBGFs) for evanescent wave sensing of refractive index within one single microfluidic analyte channel centered between the two cores. The sensor can achieve ultrahigh sensitivity by detecting the change in transmission....... We find novel features in the sensing characteristics: the sensitivity is higher at the short wavelength edge of a bandgap than at the long wavelength edge, the effective index of the odd supermode (nodd) is more sensitive to ambient refractive index change compared with that of the even supermode...

  9. Effect of crystalline lens surfaces and refractive index on image quality by model simulation analysis

    Institute of Scientific and Technical Information of China (English)

    Meimei Kong; Zhishan Gao; Lei Chen; Xinhua Li

    2008-01-01

    The surfaces and refractive index of crystalline lens play an important role in the optical performance of human eye.On the basis of two eye models,which are widely applied at present,the effect of lens surfaces and its refractive index distribution on optical imaging is analyzed with the optical design software ZEMAX (Zemax Development Co.,San Diego,USA).The result shows that good image quality can be provided by the aspheric lens surfaces or (and) the gradient-index (GRIN) distribution.It has great potential in the design of intraocular lens (IOL).The eye models with an intraocular implantation are presented.

  10. Liquid refractive index sensing independent of opacity using an optofluidic sensor based on diffraction

    CERN Document Server

    Xu, Zhida

    2014-01-01

    We have implemented a multi-functional optofluidic sensor that can monitor changes in the refractive index and pressure of biofluid simultaneously and can detect free-solution molecular interaction in-situ. In this paper, we demonstrate two major improvements of this sensor proven by both simulation and experiments. One improvement is the broader measurement range of refractive index by making the diffraction grating with high-index polymer. The other improvement is the separation of refractive index sensing from opacity sensing by using the relative power ratio of diffraction orders. This simple, compact and low-cost multi-functional optofluidic sensor has the potential to be used for in-situ biofluid monitoring.

  11. Arc-discharge effects on residual stress and refractive index in single-mode optical fibers.

    Science.gov (United States)

    Wang, Pengfei; Jenkins, Micah H; Gaylord, Thomas K

    2016-03-20

    Arc-discharge effects on the residual stress and refractive index in single-mode optical fibers are investigated using a previously developed three-dimensional concurrent stress-index measurement method. Using commercial optical fibers and a commercial fusion splicer, the residual stress and refractive index perturbations caused by weak electrical arc discharges in single-mode fibers were measured. Refractive index changes greater than 10-4 and longitudinal perturbation lengths of less than 500 μm were shown to be possible. The subsequent prospects for arc-induced long-period fiber gratings are analyzed, and a typical transmission resonance is predicted to have a depth of 56 dB and a bandwidth of 0.08 nm at a wavelength of 1585 nm. The results of this investigation will be useful in modeling device performance and optimization of arc-induced long-period fiber grating fabrication.

  12. Optimum Forward Light Scattering by Spherical and Spheroidal Dielectric Nanoparticles with High Refractive Index

    CERN Document Server

    Luk`yanchuk, Boris S; Paniagua-Dominguez, Ramon; Kuznetsov, Arseniy I

    2014-01-01

    High-refractive index dielectric nanoparticles may exhibit strong directional forward light scattering at visible and near-infrared wavelengths due to interference of simultaneously excited electric and magnetic dipole resonances. For a spherical high-index dielectric, the so-called first Kerker's condition can be realized, at which the backward scattering practically vanishes for some combination of refractive index and particle size. However, Kerker's condition for spherical particles is only possible at the tail of the scattering resonances, when the particle scatters light weakly. Here we demonstrate that significantly higher forward scattering can be realized if spheroidal particles are considered instead. For each value of refractive index exists an optimum shape of the particle, which produces minimum backscattering efficiency together with maximum forward scattering. This effect is achieved due to the overlapping of magnetic and electric dipole resonances of the spheroidal particle at the resonance fr...

  13. A Soft 3D Acoustic Metafluid with Dual-Band Negative Refractive Index.

    Science.gov (United States)

    Raffy, Simon; Mascaro, Benoit; Brunet, Thomas; Mondain-Monval, Olivier; Leng, Jacques

    2016-03-02

    Spherical silica xerogels are efficient acoustic Mie resonators. When these sub-wavelength inclusions are dispersed in a matrix, the final metafluid may display a negative acoustic refractive index upon a set of precise constraints concerning material properties, concentration, size, and dispersity of the inclusions. Because xerogels may sustain both pressure and shear waves, several bands with negative index can be tailored.

  14. Refractive Index of a Transparent Liquid Measured with a Concave Mirror

    Science.gov (United States)

    Joshi, Amitabh; Serna, Juan D.

    2012-01-01

    Measuring the refractive index "n" of a substance or medium is part of every introductory physics course. Various approaches to determine this index have been developed over the years based on the different ways light reflects and transmits in the medium. In this paper, the authors would like to present a simple geometrical derivation of the…

  15. Determination of Diameter and Index of Refraction of Textile Fibers by Laser Backscattering

    Energy Technology Data Exchange (ETDEWEB)

    H. Okuda; B. Stratton; L. Meixler; P. Efthimion; D.Mansfield

    2003-07-24

    A new method was developed to determine both diameters and indices of refraction and hence the birefringence of cylindrical textile and industrial fibers and bundles by measuring intensity patterns of the scattered light over an interval of scattering angles. The measured intensity patterns are compared with theoretical predictions (Mie theory) to determine fiber diameter and index of refraction. It is shown that the method is simple and accurate and may be useful as an on-line, noncontact diagnostic tool in real time.

  16. Field-induced refractive index variation in the dark conglomerate phase for polarization-independent switchable liquid crystal lenses.

    Science.gov (United States)

    Milton, H E; Nagaraj, M; Kaur, S; Jones, J C; Morgan, P B; Gleeson, H F

    2014-11-01

    Liquid crystal lenses are an emerging technology that can provide variable focal power in response to applied voltage. Many designs for liquid-crystal-based lenses are polarization dependent, so that 50% of light is not focused as required, making polarization-independent technologies very attractive. Recently, the dark conglomerate (DC) phase, which is an optically isotropic liquid crystalline state, has been shown to exhibit a large change in refractive index in response to an applied electric field (Δn=0.04). This paper describes computational modeling of the electrostatic solutions for two different types of 100 μm diameter liquid crystal lenses, which include the DC phase, demonstrating that it shows great potential for efficient isotropic optical switching in lenses. A feature of the field dependence of the refractive index change in the DC phase is that it is approximately linear in a certain range, leading to the prediction of excellent optical quality for driving fields in this regime. Interestingly, a simulated microlens is shown to exhibit two modes of operation: a positive lens based upon a uniform bulk change in refractive index at high voltages, and a negative lens resulting from the induction of a gradient index effect at intermediate voltages.

  17. In-Fiber Reflection Mode Interferometer Based on A Long-Period Grating For External Refractive-Index Measurement

    OpenAIRE

    Kim, D.W.; Zhang, Y.; Cooper, K. L.; Wang, Anbo

    2005-01-01

    We present two novel schemes for refractometry based on a long-period fiber grating- (LPG-) based Michelson interferometer. These schemes are designed to overcome the measurement dependence of previously demonstrated LPG-based refractometry on the immersion depth. The first utilizes an unshielded LPG and the second, a shielded one. Both schemes were tested over a certain refractive-index range, and the measurement of glucose concentration in water was experimentally demonstrated. In addition,...

  18. Development and characterization of high refractive index and high scattering acrylate polymer layers

    Science.gov (United States)

    Eiselt, Thomas; Gomard, Guillaume; Preinfalk, Jan; Gleissner, Uwe; Lemmer, Uli; Hanemann, Thomas

    2016-04-01

    The aim is to develop a polymer layer which has the ability to diffuse light homogeneously and exhibit a high refractive index. The mixtures are containing an acrylate casting resin, benzylmethacrylate, phenanthrene and other additives. Phenanthrene is employed to increase the refractive index. The mixtures are first rheologically characterized and then polymerized with heat and UV radiation. For the refractive index measurements the polymerized samples require a planar surface without air bubbles. To produce flat samples a special construction consisting of a glass plate, a teflon sheet, a silicone ring (PDMS mold), another teflon sheet and another glass plate is developed. Glue clamps are used to fix this construction together. Selected samples have a refractive index of 1.585 at 20°C at a wavelength of 589nm. A master mixture with a high refractive index is taken for further experiments. Nano scaled titanium dioxide is added and dispersed into the master mixture and then spin coated on a glass substrate. These layers are optically characterized. The specular transmission and the overall transmission are measured to investigate the degree of scattering, which is defined as the haze. Most of the presented layers express the expected haze of over 50%.

  19. Simultaneous refractive index and thickness measurement with the transmission interferometric adsorption sensor

    Energy Technology Data Exchange (ETDEWEB)

    Sannomiya, Takumi; Voeroes, Janos [Laboratory of Biosensors and Bioelectronics, Department of Information Technology and Electrical Engineering, ETH Zurich, 8092, Zurich (Switzerland); Balmer, Tobias E [Materials Research Center, ETH Zurich, 8093, Zurich (Switzerland); Heuberger, Manfred, E-mail: sannomiya@biomed.ee.ethz.c, E-mail: tobias.balmer@mat.ethz.c, E-mail: manfred.heuberger@empa.c, E-mail: janos.voros@biomed.ee.ethz.c [Laboratory for Surface Science and Technology, Department of Materials, ETH Zurich, 8093, Zurich (Switzerland)

    2010-10-13

    Refractive index and thickness of the adlayer are determined simultaneously using the transmission interferometric adsorption sensor (TInAS). Optical biosensors, where both refractive index and thickness of a homogeneous adlayer (thus the adsorbed mass) are determined simultaneously, so-called model-free biosensors, are important tools to investigate the adsorbed mass of biomolecules with unknown conformation. Our proposed calculation method enables model-free biosensing from a single spectrum acquired by a simple TInAS setup, namely using information of peak/dip positions as well as peak/dip intensities. The feasibility of this method was experimentally tested by adsorbing polyelectrolyte multilayer as well as biomolecules. To validate the new method also for the more intricate heterogeneous adlayer, the apparent refractive index and thickness were assessed theoretically by simulating a selection of different adsorbate configurations with the multiple multipole program (MMP). We found that a lateral inhomogeneity of the adsorbate (e.g. islands or adsorbed colloids) results in correct thickness and in reduced refractive index averaged in proportion to their density while vertically inhomogeneous density caused more complex responses. However, the apparent mass was always correct. Measurement errors can lead to significant errors in the apparent refractive index, particularly when the adlayer is very thin (<5 nm). This model-free TInAS technique would be useful not only for the measurement of adsorbed mass but also for the conformational analysis of the adsorbed molecules.

  20. Method of and system for identification or estimation of a refractive index of a liquid

    DEFF Research Database (Denmark)

    2015-01-01

    This invention relates to a method of and a system (100) for identification or estimation of a refractive index of a liquid (120) comprising a light receiving part (111) adapted to receive polarised or non-polarised light (125; 135), a light emitting part (112) adapted, during use, to transmit li....../or captured by an image capturing unit (501), enables identification or estimation of the predetermined refractive index of the liquid (120). In this way, a method and a system for identification or estimation of a refractive index of a liquid is readily provided.......This invention relates to a method of and a system (100) for identification or estimation of a refractive index of a liquid (120) comprising a light receiving part (111) adapted to receive polarised or non-polarised light (125; 135), a light emitting part (112) adapted, during use, to transmit...... light (130), an optical structure (110) being adapted to receive, during use, polarised light (125) via or from the light receiving part (111), and being adapted to receive, during use, a liquid (120) having a predetermined refractive index to be identified or estimated, and a first polariser (115...

  1. Engineering of refractive index in sulfide chalcogenide glass by direct laser writing

    KAUST Repository

    Zhang, Yaping

    2010-01-01

    Arsenic trisulfide (As2S3) glass is an interesting material for photonic integrated circuits (PICs) as infrared (IR) or nonlinear optical components. In this paper, direct laser writing was applied to engineer the refractive index of As2S3 thin film. Film samples were exposed to focused above bandgap light with wavelength at 405 nm using different fluence adjusted by laser power and exposure time. The index of refraction before and after laser irradiation was calculated by fitting the experimental data obtained from Spectroscopic Ellipsometer (SE) measurement to Tauc-Lorenz dispersion formula. A positive change in refractive index (Δn = 0.19 at 1.55 μm) as well as an enhancement in anisotropy was achieved in As2S3 film by using 10 mW, 0.3 μs laser irradiation. With further increasing the fluence, refractive index increased while anisotropic property weakened. Due to the rapid and large photo-induced modification of refractive index obtainable with high spatial resolution, this process is promising for integrated optic device fabrication.

  2. Fabrication of elliptic microfibers with CO2 laser for high-sensitivity refractive index sensing.

    Science.gov (United States)

    Sun, Li-Peng; Li, Jie; Gao, Shuai; Jin, Long; Ran, Yang; Guan, Bai-Ou

    2014-06-15

    We propose a convenient method for achieving highly birefringent (HiBi) elliptic microfibers by use of the CO2-laser machining and the flame-brushing techniques. With optimization of fabrication process, a high birefringence of up to 2.10×10(-2) is experimentally obtained. Especially, within a polarization Sagnac interferometer acting as a refractive index (RI) sensor, both positive and abnormal negative sensitivity is measured, dependent on the geometrical variables of the HiBi microfiber. The maximum RI sensitivity is ∼195,348  nm/RI-unit around RI=1.35887, which is the highest among the microfiber devices as reported, to our knowledge.

  3. Electromagnetic polarization controlled perfect switching effect with high refractive index dimers. the beam-splitter configuration

    CERN Document Server

    Barreda, Angela I; Litman, Amelie; Gonzalez, Francisco; Geffrin, Jean-Michel; Moreno, Fernando

    2016-01-01

    High Refractive Index (HRI) dielectric particles smaller than the wavelength, isolated or forming a designed ensemble are ideal candidates as new multifunctional elements for building optical devices. Their directionality effects are traditionally analyzed through forward and backward measurements, even if these directions are not suitable for practical purposes. Here we present unambiguous experimental evidence in the microwave range that, for a dimer of HRI spherical particles, a perfect switching effect (perfect means off = null intensity) is observed out of those directions as a consequence of the mutual particle electric/magnetic interaction. The binary state depends on the excitation polarization (polarization switching). Its analysis is performed through the linear polarization degree of scattered radiation at a detection direction perpendicular to the incident direction: the beam-splitter configuration. The scaling property of Maxwell equations allows generalizing our results to other frequency range ...

  4. PIV Measurement of Pulsatile Flows in 3D Curved Tubes Using Refractive Index Matching Method

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Hyeon Ji; Ji, Ho Seong; Kim, Kyung Chun [Pusan Nat’l Univ., Busan (Korea, Republic of)

    2016-08-15

    Three-dimensional models of stenosis blood vessels were prepared using a 3D printer. The models included a straight pipe with axisymmetric stenosis and a pipe that was bent 10° from the center of stenosis. A refractive index matching method was utilized to measure accurate velocity fields inside the 3D tubes. Three different pulsatile flows were generated and controlled by changing the rotational speed frequency of the peristaltic pump. Unsteady velocity fields were measured by a time-resolved particle image velocimetry method. Periodic shedding of vortices occurred and moves depended on the maximum velocity region. The sizes and the positions of the vortices and symmetry are influenced by mean Reynolds number and tube geometry. In the case of the bent pipe, a recirculation zone observed at the post-stenosis could explain the possibility of blood clot formation and blood clot adhesion in view of hemodynamics.

  5. The influence of temperature to a refractive index sensor based on a macro-bending tapered plastic optical fiber

    Science.gov (United States)

    Teng, Chuan-xin; Yu, Fang-da; Jing, Ning; Zheng, Jie

    2016-09-01

    The temperature influence to a refractive index (RI) sensor based on a macro-bending tapered plastic optical fiber (POF) was investigated experimentally. The total temperature dependence loss (TDLtotal) and total temperature dependence RI deviation (TDRtotal) were measured at different temperature (10-60 °C) over an RI range of 1.33-1.41. The temperature dependence RI deviation of the sensor itself was obtained by subtracting the temperature dependence RI of measured liquid from TDRtotal. Therefore, the influence of temperature variation to the sensor was characterized and corrected.

  6. Metamaterials with tunable refractive index fabricated from amorphous ferromagnetic microwires and optical Magnus effect

    Science.gov (United States)

    Ivanov, Andrey; Vedyayev, Anatoly; Galkin, Vladimir; Shalygin, Alexander; Ivanov, Valery

    2009-03-01

    For homogeneous NPVM (negative phase--velocity mediums) [V. G. Veselago, Soviet Physics - Uspekhi 10 (1968) 509; T. G. Mackay, A. Lakhtakia, Phys. Rev. E 69 (2004) 026602] anomalous effects such as negative refraction, light pressure, Doppler shift, Cherenkov-Vavilov radiation, Goos-Hanchen effect have been discovered in different frequency ranges. In this presentation the optical circular polarized effect is calculated for inhomogeneous mediums (optical Magnus effect) and it is shown that it is anomalous in NPVM with respect to ``right-handed'' materials. The proposed metamaterials fabricated from glass coated amorphous ferromagnetic Co-Fe-Cr-B-Si microwires are shown to exhibit a negative refractive index for electromagnetic waves over scale of GHz frequencies [A.V. Ivanov, A.N. Shalygin, A.V. Vedyayev, V.A. Ivanov, JETP Letters 85 (2007) 565]. The magnetostatic interaction between microwires has been taken into account. The phase and group velocities in proposed metamaterial have been calculated. The ratio of thereof depends monotonically on the size of the microwires. Optical properties of such metamaterials are tunable by an external magnetic field and mechanical stress.

  7. Stratospheric aerosol acidity, density, and refractive index deduced from SAGE 2 and NMC temperature data

    Science.gov (United States)

    Yue, G. K.; Poole, L. R.; Wang, P.-H.; Chiou, E. W.

    1994-01-01

    Water vapor concentrations obtained by the Stratospheric Aerosol and Gas Experiment 2 (SAGE 2) and collocated temperatures provided by the National Meteorological Center (NMC) from 1986 to 1990 are used to deduce seasonally and zonally averaged acidity, density, and refractive index of stratospheric aerosols. It is found that the weight percentage of sulfuric acid in the aerosols increases from about 60 just above the tropopause to about 86 at 35 km. The density increases from about 1.55 to 1.85 g/cu cm between the same altitude limits. Some seasonal variations of composition and density are evident at high latitudes. The refractive indices at 1.02, 0.694, and 0.532 micrometers increase, respectively, from about 1.425, 1.430, and 1.435 just above the tropopause to about 1.445, 1.455, and 1.458 at altitudes above 27 km, depending on the season and latitude. The aerosol properties presented can be used in models to study the effectiveness of heterogeneous chemistry, the mass loading of stratospheric aerosols, and the extinction and backscatter of aerosols at different wavelengths. Computed aerosol surface areas, rate coefficients for the heterogeneous reaction ClONO2 + H2O yields HOCl + HNO3 and aerosol mass concentrations before and after the Pinatubo eruption in June 1991 are shown as sample applications.

  8. New fiber optic sensor: application to refractive index sensing

    Science.gov (United States)

    Meriaudeau, Fabrice; Wig, A. G.; Passian, A.; Ferrell, Trinidad L.

    2000-08-01

    Optical fibers are more and more used as chemical sensors. This is, mainly due to their low cost, and their high efficiency to work in harsh and remote environments. Many devices are based on thin film plasmon excitation where a metal coating is evaporated onto the core of an etched optical fiber. In this paper, a new sensor configuration is presented. Instead of exciting surface plasmon waves on a thin film, surface plasma waves are excited on metal islands. The fiber is coated with 3 layers of gold. Each layer is annealed before the next layer is evaporated onto it. this is done to avoid any light leakage, fact which was found on a prior version with only one gold coating. Different sets of fibers were tested and sensitive and reproducible results for liquid with refraction indices varying from 1.3 to 1.7 were obtained.

  9. Matching-index-of-refraction of transparent 3D printing models for flow visualization

    Energy Technology Data Exchange (ETDEWEB)

    Song, Min Seop; Choi, Hae Yoon; Seong, Jee Hyun; Kim, Eung Soo, E-mail: kes7741@snu.ac.kr

    2015-04-01

    Matching-index-of-refraction (MIR) has been used for obtaining high-quality flow visualization data for the fundamental nuclear thermal-hydraulic researches. By this method, distortions of the optical measurements such as PIV and LDV have been successfully minimized using various combinations of the model materials and the working fluids. This study investigated a novel 3D printing technology for manufacturing models and an oil-based working fluid for matching the refractive indices. Transparent test samples were fabricated by various rapid prototyping methods including selective layer sintering (SLS), stereolithography (SLA), and vacuum casting. As a result, the SLA direct 3D printing was evaluated to be the most suitable for flow visualization considering manufacturability, transparency, and refractive index. In order to match the refractive indices of the 3D printing models, a working fluid was developed based on the mixture of herb essential oils, which exhibit high refractive index, high transparency, high density, low viscosity, low toxicity, and low price. The refractive index and viscosity of the working fluid range 1.453–1.555 and 2.37–6.94 cP, respectively. In order to validate the MIR method, a simple test using a twisted prism made by the SLA technique and the oil mixture (anise and light mineral oil) was conducted. The experimental results show that the MIR can be successfully achieved at the refractive index of 1.51, and the proposed MIR method is expected to be widely used for flow visualization studies and CFD validation for the nuclear thermal-hydraulic researches.

  10. Realization of Zero-Refractive-Index Lens with Ultralow Spherical Aberration

    CERN Document Server

    He, Xin-Tao; Chang, Ming-Li; Xu, Shao-Zeng; Zhao, Fu-Li; Deng, Shao-Zhi; She, Jun-Cong; Dong, Jian-Wen

    2016-01-01

    Optical complex materials offer unprecedented opportunity to engineer fundamental band dispersion which enables novel optoelectronic functionality and devices. Exploration of photonic Dirac cone at the center of momentum space has inspired an exceptional characteristic of zero-index, which is similar to zero effective mass in fermionic Dirac systems. Such all-dielectric zero-index photonic crystals provide an in-plane mechanism such that the energy of the propagating waves can be well confined along the chip direction. A straightforward example is to achieve the anomalous focusing effect without longitudinal spherical aberration, when the size of zero-index lens is large enough. Here, we designed and fabricated a prototype of zero-refractive-index lens by comprising large-area silicon nanopillar array with plane-concave profile. Near-zero refractive index was quantitatively measured near 1.55 um through anomalous focusing effect, predictable by effective medium theory. The zero-index lens was also demonstrate...

  11. Interferometric Spectroscopy of Scattered Light Can Quantify the Statistics of Subdiffractional Refractive-Index Fluctuations

    Science.gov (United States)

    Cherkezyan, L.; Capoglu, I.; Subramanian, H.; Rogers, J. D.; Damania, D.; Taflove, A.; Backman, V.

    2013-07-01

    Despite major importance in physics, biology, and other sciences, the optical sensing of nanoscale structures in the far zone remains an open problem due to the fundamental diffraction limit of resolution. We establish that the expected value of spectral variance (Σ˜2) of a far-field, diffraction-limited microscope image can quantify the refractive-index fluctuations of a label-free, weakly scattering sample at subdiffraction length scales. We report the general expression of Σ˜ for an arbitrary refractive-index distribution. For an exponential refractive-index spatial correlation, we obtain a closed-form solution of Σ˜ that is in excellent agreement with three-dimensional finite-difference time-domain solutions of Maxwell’s equations. Sensing complex inhomogeneous media at the nanoscale can benefit fields from material science to medical diagnostics.

  12. An anisotropic negative refractive index medium operated at multiple-angle incidences.

    Science.gov (United States)

    Yang, Tien-Chung; Yang, Yu-Hang; Yen, Ta-Jen

    2009-12-21

    Recently metamaterials have been demonstrating new physics to enable various unprecedented electromagnetic properties, but pratically they are so sensitive to incident angles of the external excitation that their applications are restricted. Therefore, we present an anisotropic negative refractive index medium operated at multiple-angle incidences (NRIM for MAI) to ease such a burden. Both the simulated and measured transmittance, reflectance and the corresponding material parameters indicate that our structure does possess the anisotropic negative refractive index with respect to different incident angles. In addition, the opposite directions of group and phase velocities are also demonstrated under both grazing-angle, normal and 45-degree incidences to further verify the negative refractive index of the designed monolithic NRIM structure for multiple-angle incidences.

  13. Femtosecond pulse shaping by modulating the refractive index modulation of volume holographic grating.

    Science.gov (United States)

    Yan, Xiaona; Dai, Ye; Gao, Zixuan; Chen, Yuanyuan; Yang, Xihua; Ma, Guohong

    2013-03-25

    Based on the modified Kogelnik's coupled-wave theory, time- and frequency-domain diffractions of a femtosecond pulse from transmitted volume holographic gratings (VHGs) are theoretically studied. Results show that when the refractive index modulation of the VHG changes in a certain range, the number of temporal diffracted pulse will evolve from one to two, then to three, and this pulse number evolution is periodic. This particular phenomenon can be explained by diffraction intensity spectrum and the overmodulation effect of refractive index modulation of transmitted VHG. Moreover, we find centers of all temporal diffracted pulses translate along the negative time axis, and the translation is irrelevant to the refractive index modulations. We will use time delay of volume grating to give a reasonable explanation.

  14. Optical waveguides with compound multiperiodic grating nanostructures for refractive index sensing

    DEFF Research Database (Denmark)

    Neustock, Lars Thorben; Jahns, Sabrina; Adam, Jost

    2016-01-01

    The spectral characteristics and refractive index sensitivity of compound multiperiodic grating waveguides are investigated in theory and experiment. Compound gratings are formed by superposition of two or more monoperiodic gratings. Compared to monoperiodic photonic crystal waveguides, compound...... grating waveguides offer more degrees of design freedom by choice of component grating periods and duty cycles. Refractive index sensing is achieved by evaluating the wavelength or intensity of guided-mode resonances in the reflection spectrum. We designed, fabricated and characterized 24 different...... compound multiperiodic nanostructured waveguides for refractive index sensing. Simulations are carried out with the Rigorous Coupled Wave Algorithm (RCWA). The resulting spectra, resonance sensitivities and quality factors are compared to monoperiodic as well as to three selected aperiodic nanostructures...

  15. Measurement of Single Cell Refractive Index, Dry Mass, Volume, and Density Using a Transillumination Microscope

    Science.gov (United States)

    Phillips, Kevin G.; Jacques, Steven L.; McCarty, Owen J. T.

    2012-09-01

    Phase contrast microscopy has become ubiquitous in the field of biology, particularly in qualitative investigations of cellular morphology. However, the use of quantitative phase retrieval methods and their connection to cellular refractive index and dry mass density remain under utilized. This is due in part to the restriction of phase and cellular mass determination to custom built instruments, involved mathematical analysis, and prohibitive sample perturbations. We introduce tomographic bright field imaging, an accessible optical imaging technique enabling the three dimensional measurement of cellular refractive index and dry mass density using a standard transillumination optical microscope. The validity of the technique is demonstrated on polystyrene spheres. The technique is then applied to the measurement of the refractive index, dry mass, volume, and density of red blood cells. This optical technique enables a simple and robust means to perform quantitative investigations of engineered and biological specimens in three dimensions using standard optical microscopes.

  16. Interferometric spectroscopy of scattered light can quantify the statistics of subdiffractional refractive-index fluctuations

    Science.gov (United States)

    Cherkezyan, L.; Capoglu, I.; Subramanian, H.; Rogers, J. D.; Damania, D.; Taflove, A.

    2014-01-01

    Despite major importance in physics, biology, and other sciences, optical sensing of nanoscale structures in the far-zone remains an open problem due to the fundamental diffraction limit of resolution. We establish that the expected value of spectral variance (Σ̃2) of a far-field, diffraction-limited microscope image can quantify the refractive-index fluctuations of a label-free, weakly scattering sample at subdiffraction length scales. We report the general expression of Σ̃ for an arbitrary refractive-index distribution. For an exponential refractive-index spatial correlation, we obtain a closed-form solution of Σ̃ which is in excellent agreement with three-dimensional finite-difference time-domain solutions of Maxwell's equations. Sensing complex inhomogeneous media at the nanoscale can benefit fields from material science to medical diagnostics. PMID:23909326

  17. A Naked Eye Refractive Index Sensor with a Visible Multiple Peak Metamaterial Absorber

    Directory of Open Access Journals (Sweden)

    Heli Ma

    2015-03-01

    Full Text Available We report a naked eye refractive index sensor with a visible metamaterial absorber. The visible metamaterial absorber consisting of a silver dendritic/dielectric/metal structure shows multiple absorption peaks. By incorporating a gain material (rhodamine B into the dielectric layer, the maximal magnitude of the absorption peak can be improved by about 30%. As the metamaterial absorber is sensitive to the refractive index of glucose solutions, it can function as a sensor that quickly responds to variations of the refractive index of the liquid. Meanwhile, since the response is presented via color changes, it can be clearly observed by the naked eyes. Further experiments have confirmed that the sensor can be used repeatedly.

  18. A Simple Model for Measuring Refractive Index of a Liquid Based upon Fresnel Equations

    Institute of Scientific and Technical Information of China (English)

    ZHANG Zhi-Wei; WU Zhi-Fang; WEN Ting-Dun

    2007-01-01

    Due to many experimental data required and a lot of calculations involved, it is very complex and cumbersome to model prism-based liquid-refractive-index-measuring methods. We develop a new method of mathematical modelling for measuring refractive index of a liquid based upon the Fresnel formula and prism internal reflection at an incident angle less than the critical angle. With this method, only two different concentrations measurements for a kind of solution can lead to the determination of computational model. Measurements are performed to examine the validity of the theoretical model. Experimental results indicate the feasibility of the theoretical model with an error of 1%. The method is also capable of measuring even smaller changes in the optical refractive index of the material on a metal surface by the surface plasma resonance sensing techniques.

  19. Plasma-enhanced growth, composition, and refractive index of silicon oxy-nitride films

    DEFF Research Database (Denmark)

    Mattsson, Kent Erik

    1995-01-01

    Secondary ion mass spectrometry and refractive index measurements have been carried out on silicon oxy-nitride produced by plasma-enhanced chemical vapor deposition (PECVD). Nitrous oxide and ammonia were added to a constant flow of 2% silane in nitrogen, to produce oxy-nitride films with atomic...... nitrogen concentrations between 2 and 10 at. %. A simple atomic valence model is found to describe both the measured atomic concentrations and published material compositions for silicon oxy-nitride produced by PECVD. A relation between the Si–N bond concentration and the refractive index is found....... This relation suggest that the refractive index of oxy-nitride with a low nitrogen concentration is determined by the material density. It is suggested that the relative oxygen concentration in the gas flow is the major deposition characterization parameter, and that water vapor is the predominant reaction by...

  20. Suppression of Air Refractive Index Variations in High-Resolution Interferometry

    Directory of Open Access Journals (Sweden)

    Zdeněk Buchta

    2011-08-01

    Full Text Available The influence of the refractive index of air has proven to be a major problem on the road to improvement of the uncertainty in interferometric displacement measurements. We propose an approach with two counter-measuring interferometers acting as a combination of tracking refractometer and a displacement interferometer referencing the wavelength of the laser source to a mechanical standard made of a material with ultra-low thermal expansion. This technique combines length measurement within a specified range with measurement of the refractive index fluctuations in one axis. Errors caused by different position of the interferometer laser beam and air sensors are thus eliminated. The method has been experimentally tested in comparison with the indirect measurement of the refractive index of air in a thermal controlled environment. Over a 1 K temperature range an agreement on the level of 5 × 10−8 has been achieved.

  1. Liquid refractive index sensor based on a 2D 10-fold photonic quasicrystal

    Science.gov (United States)

    Wang, Shuai; Sun, XiaoHong; Wang, Cong; Peng, Gangding; Qi, Yongle; Wang, XiShi

    2017-09-01

    A liquid refractive index sensor is designed and optimized by using silicon-rods based on a 10-fold photonic quasicrystal without defects. The resonant mode with high Q value is chosen as the sensing wavelength in the transmission spectrum. By changing the radius of the silicon pillars, the sensor size and the refractive index of the background media, different types of sensors are designed and investigated. On the other hand, the performance of the sensor is investigated including the measurement range, sensitivity, etc. In the detection limit of spectral instruments, 0.02 nm, the sensing accuracy is 10-4 refractive index unit with a figure of merit of 1478. The measurement range is from 1.2731 to 1.4185. This will provide a new method for the design and fabrication of lab-on-chip, microfluidic optical elements and integrated optical circuits.

  2. Correction of refraction index based on adjacent pulse repetition interval lengths

    Science.gov (United States)

    Wei, Dong; Aketagawa, Masato

    2014-11-01

    Correction of refraction index is important for length measurement. The two-color method has been widely used for correction. The wavelengths of lasers have been used as a ruler of that. Based on the analogy between the wavelength and the adjacent pulse repetition interval length (APRIL), in this paper we investigate the possibility of two-color method based on adjacent pulse repetition interval lengths. Since the wavelength-based two-color method can eliminate the inhomogeneous disturbance of effects caused by the phase refractive index, therefore the APRIL-based two-color method can eliminate the air turbulence of errors induced by the group refractive index. Our analysis will contribute to high-precision length measurement.

  3. Optical extinction, refractive index, and multiple scattering for suspensions of interacting colloidal particles

    Science.gov (United States)

    Parola, Alberto; Piazza, Roberto; Degiorgio, Vittorio

    2014-09-01

    We provide a general microscopic theory of the scattering cross-section and of the refractive index for a system of interacting colloidal particles, exact at second order in the molecular polarizabilities. In particular: (a) we show that the structural features of the suspension are encoded into the forward scattered field by multiple scattering effects, whose contribution is essential for the so-called "optical theorem" to hold in the presence of interactions; (b) we investigate the role of radiation reaction on light extinction; (c) we discuss our results in the framework of effective medium theories, presenting a general result for the effective refractive index valid, whatever the structural properties of the suspension, in the limit of particles much larger than the wavelength; (d) by discussing strongly-interacting suspensions, we unravel subtle anomalous dispersion effects for the suspension refractive index.

  4. SPR optimization using metamaterials in a D-type PCF refractive index sensor

    Science.gov (United States)

    Santos, D. F.; Guerreiro, A.; Baptista, J. M.

    2017-01-01

    Using the finite element method (FEM), this paper presents a numerical investigation of the performance analysis of a D-type photonic crystal fiber (D-type PCF) for refractive index sensing, based on surface plasmon resonance (SPR) with a planar structure made out of a metamaterial. COMSOL Multiphysics was used to evaluate the design of the referred refractive index optical fiber sensor, with higher accuracy and considerable economy of time and resources. A study of different metamaterials concentrations conformed by aluminum oxide (Al2O3) and silver (Ag) is carried out. Another structural parameters, which influences the refractive index sensor performance, the thickness of the metamaterial, is also investigated. The results indicate that the use of metamaterials provides a way of improving the performance of SPR sensors on optical fibers and allows to tailor the working parameters of the sensor.

  5. Index of refraction, Rayleigh scattering length, and Sellmeier coefficients in solid and liquid argon and xenon

    CERN Document Server

    Grace, Emily

    2015-01-01

    Like all the noble elements, argon and xenon are scintillators, \\emph{i.e.} they produce light when exposed to radiation. Large liquid argon detectors have become widely used in low background experiments, including dark matter and neutrino research. However, the index of refraction of liquid argon at the scintillation wavelength has not been measured and current Rayleigh scattering length calculations disagree with measurements. Furthermore, the Rayleigh scattering length and index of refraction of solid argon and solid xenon at their scintillation wavelengths have not been previously measured or calculated. We introduce a new calculation using previously measured data in liquid and solid argon and xenon to extrapolate the optical properties at the scintillation wavelengths using the Sellmeier dispersion relationship. As a point of validation, we compare our extrapolated index of refraction for liquid xenon against the measured value and find agreement within the uncertainties. This method results in a Rayle...

  6. Estimating index of refraction for material identification in comparison to existing temperature emissivity separation algorithms

    Science.gov (United States)

    Martin, Jacob A.; Gross, Kevin C.

    2016-05-01

    As off-nadir viewing platforms become increasingly prevalent in remote sensing, material identification techniques must be robust to changing viewing geometries. Current identification strategies generally rely on estimating reflectivity or emissivity, both of which vary with viewing angle. Presented here is a technique, leveraging polarimetric and hyperspectral imaging (P-HSI), to estimate index of refraction which is invariant to viewing geometry. Results from a quartz window show that index of refraction can be retrieved to within 0.08 rms error from 875-1250 cm-1 for an amorphous material. Results from a silicon carbide (SiC) wafer, which has much sharper features than quartz glass, show the index of refraction can be retrieved to within 0.07 rms error. The results from each of these datasets show an improvement when compared with a maximum smoothness TES algorithm.

  7. Profile and Character of Atmospheric Structure Constant of Refractive Index C_n~2

    Institute of Scientific and Technical Information of China (English)

    SUN Gang; WENG Ning-Quan; XIAO Li-Ming; WU Yi

    2012-01-01

    Random fluctuations of turbulence bring random fluctuations of the refractive index, making the atmosphere a random fluctuation medium that destroys the coherence of light-waves. Research in atmospheric turbulence is actually the investigation of the atmospheric refractive index. The atmospheric structure constant of refractive index, C n 2 , is an important parameter denoting atmospheric turbulence. In this paper, C n 2 is measured during the day and at night and in all four seasons using a high sensitivity micro-thermal meter QHTP-2. The vertical profile of C n 2 in Hefei (0-30 km) is investigated by the analysis of experimental data. The average profile of C n 2 in Hefei exhibits conspicuous day and night differences with increased altitude. The distribution of log(C n 2 ) is nearly normal and has conspicuous seasonal differences.

  8. High-refractive-index transparent coatings enhance the optical fiber cladding modes refractometric sensitivity.

    Science.gov (United States)

    Renoirt, Jean-Michel; Zhang, Chao; Debliquy, Marc; Olivier, Marie-Georges; Mégret, Patrice; Caucheteur, Christophe

    2013-11-18

    The high order cladding modes of standard single mode optical fiber appear in quasi-degenerate pairs corresponding to mostly radially or mostly azimuthally polarized light. In this work, we demonstrate that, in the presence of a high-refractive-index coating surrounding the fiber outer surface, the wavelength spacing between the orthogonally polarized cladding modes families can be drastically enhanced. This behavior can be advantageously exploited for refractometric sensing purposes. For this, we make use of tilted fiber Bragg gratings (TFBGs) as spectral combs to excite the orthogonally polarized cladding modes families separately. TFBGs were coated with a nanometer-scale transparent thin film characterized by a refractive index value close to 1.9, well higher than the one of pure silica. This coating brings two important assets: an ~8-fold increase in refractometric sensitivity is obtained in comparison to bare TFBGs while the sensitivity is extended to surrounding refractive index (SRI) values above 1.45.

  9. Estimation of volcanic ash refractive index from satellite infrared sounder data

    Science.gov (United States)

    Ishimoto, H.; Masuda, K.

    2014-12-01

    The properties of volcanic ash clouds (cloud height, optical depth, and effective radius of the particles) are planned to estimate from the data of the next Japanese geostationary meteorological satellite, Himawari 8/9. The volcanic ash algorithms, such as those proposed by NOAA/NESDIS and by EUMETSAT, are based on the infrared absorption properties of the ash particles, and the refractive index of a typical volcanic rock (i.e. andesite) has been used in the forward radiative transfer calculations. Because of a variety of the absorption properties for real volcanic ash particles at infrared wavelengths (9-13 micron), a large retrieval error may occur if the refractive index of the observed ash particles was different from that assumed in the retrieval algorithm. Satellite infrared sounder provides spectral information for the volcanic ash clouds. If we can estimate the refractive index of the ash particles from the infrared sounder data, a dataset of the optical properties for similar rock type of the volcanic ash can be prepared for the ash retrieval algorithms of geostationary/polar-orbiting satellites in advance. Furthermore, the estimated refractive index can be used for a diagnostic and a correction of the ash particle model in the retrieval algorithm within a period of the volcanic activities. In this work, optimal estimation of the volcanic ash parameters was conducted through the radiative transfer calculations for the window channels of the atmospheric infrared sounder (AIRS). The estimated refractive indices are proposed for the volcanic ash particles of some eruption events.

  10. Determination of femtosecond-laser-induced refractive-index changes in an optical fiber from far-field measurements

    DEFF Research Database (Denmark)

    Savolainen, Juha-Matti; Grüner-Nielsen, Lars; Kristensen, Poul

    2014-01-01

    A new method for direct writing of localized, circularly symmetric refractive-index changes in optical fibers with a femtosecond laser is demonstrated. The refractive-index changes are characterized using a novel approach employing comparison of numerical simulations to the measured far......-field profiles of unmodified and modified fibers. From the analysis, a negative refractive-index change of −0.015 0.005 within a radius of 0.6 0.1 μm is determined....

  11. Effect of base monomer's refractive index on curing depth and polymerization conversion of photo-cured resin composites.

    Science.gov (United States)

    Fujita, Kou; Nishiyama, Norihiro; Nemoto, Kimiya; Okada, Tamami; Ikemi, Takuji

    2005-09-01

    In this study, we examined the effect of the transmitted amount of visible light through a resin composite on the curing depth and polymerization conversion. Transmitted amount of visible light was strongly dependent on the magnitude of refractive index difference that existed between the resin and silica filler. More specifically, the differences arose from the type of base monomer used. The transmitted amount of visible light exhibited a good correlation with the curing depth and Knoop hardness ratio of the bottom surface against the top surface of the resin composite. To improve the polymerization conversion of the cavity floor, it is important to reduce the refractive index difference that exists between the base resin and silica filler.

  12. Determining particle size distribution and refractive index in a two-layer tissue phantom by linearly polarized light

    Institute of Scientific and Technical Information of China (English)

    Yong Deng; Qiang Lu; Qingming Luo

    2006-01-01

    We report a new method for measuring particle size distribution (PSD) and refractive index of the top layer in a two-layer tissue phantom simulated epithelium tissue by varying the azimuth angle of incident linearly polarized light. The polarization gating technique is used to decouple the single and multiple scattering components in the returned signal. The theoretical model based on Mie theory is presented and a nonlinear inversion method - floating genetic algorithm - is applied to inverting the azimuth dependence of component of polarization light backscattered. The experiment results demonstrate that the size distribution and refractive index of the scatters of the top layer can be determined by measuring and analyzing the differential signal of the parallel and perpendicular components from a two-layer tissue phantom. The method implies to detect precancerous changes in human epithelial tissue.

  13. Three-dimensional negative index of refraction at optical frequencies by coupling plasmonic waveguides

    CERN Document Server

    Verhagen, Ewold; L.,; Kuipers,; Polman, Albert

    2010-01-01

    We identify a route towards achieving a negative index of refraction at optical frequencies based on coupling between plasmonic waveguides that support backwards waves. We show how modal symmetry can be exploited in metal-dielectric waveguide pairs to achieve negative refraction of both phase and energy. By properly controlling coupling between adjacent waveguides, a metamaterial consisting of a one-dimensional multilayer stack exhibiting an isotropic index of -1 can be achieved at a free-space wavelength of 400 nm. The general concepts developed here may inspire new low-loss metamaterial designs operating close to the metal plasma frequency.

  14. Three-Dimensional Negative Index of Refraction at Optical Frequencies by Coupling Plasmonic Waveguides

    Science.gov (United States)

    Verhagen, Ewold; de Waele, René; Kuipers, L.; Polman, Albert

    2010-11-01

    We identify a route towards achieving a negative index of refraction at optical frequencies based on coupling between plasmonic waveguides that support backwards waves. We show how modal symmetry can be exploited in metal-dielectric waveguide pairs to achieve negative refraction of both phase and energy. Control of waveguide coupling yields a metamaterial consisting of a one-dimensional multilayer stack that exhibits an isotropic index of -1 at a free-space wavelength of 400 nm. The concepts developed here may inspire new low-loss metamaterial designs operating close to the metal plasma frequency.

  15. W-band Pancharatnam half-wave plate based on negative refractive index metamaterials.

    Science.gov (United States)

    Mohamed, Imran; Pisano, Giampaolo; Ng, Ming Wah

    2014-04-01

    Electromagnetic metamaterials, made from arrangements of subwavelength-sized structures, can be used to manipulate radiation. Designing metamaterials that have a positive refractive index along one axis and a negative refractive index along the orthogonal axis can result in birefringences, Δn>1. The effect can be used to create wave plates with subwavelength thicknesses. Previous attempts at making wave plates in this way have resulted in very narrow usable bandwidths. In this paper, we use the Pancharatnam method to increase the usable bandwidth. A combination of finite element method and transmission line models was used to optimize the final design. Experimental results are compared with the modeled data.

  16. Design of fiber metamaterials with negative refractive index in the infrared.

    Science.gov (United States)

    Townsend, Scott; Zhou, Shiwei; Li, Qing

    2015-07-13

    Metamaterials possess intricate, sub-wavelength microstructures, making scalability a salient concern in regard to their practicality. Fiber-drawing offers a route to producing large quantities of material at relatively low cost, though to our knowledge, a fiber-based design capable of negative refractive index behaviour has not yet been proposed. We submit that the electric and magnetic dipole resonance modes of the fiber can be enhanced by including in the fiber aligned metallic inclusions. Addition of a solid metallic core can effect a synchronisation of these modes, allowing a collection of the fibers to possess negative refractive index.

  17. W-Band Pancharatnam Half Wave Plate Based on Negative Refractive Index Metamaterials

    CERN Document Server

    Mohamed, Imran; Ng, Ming Wah

    2014-01-01

    Electromagnetic metamaterials, made from arrangements of subwavelength sized structures, can be used to manipulate radiation. Designing metamaterials that have a positive refractive index along one axis and a negative refractive index along the orthogonal axis can result in birefringences, $\\Delta n>1$. The effect can be used to create wave plates with subwavelength thicknesses. Previous attempts at making wave plates in this way have resulted in very narrow usable bandwidths. In this paper, we use the Pancharatnam method to increase the usable bandwidth. A combination of Finite Element Method and Transmission Line models were used to optimise the final design. Experimental results are compared to the modelled data.

  18. Design of fishnet metamaterials with broadband negative refractive index in the visible spectrum.

    Science.gov (United States)

    Zhou, Shiwei; Townsend, Scott; Xie, Yi Min; Huang, Xiaodong; Shen, Jianhu; Li, Qing

    2014-04-15

    We propose a technique capable of designing fishnet metamaterials that have a negative refractive index (NRI) over a broad range in the visible and infrared. The technique relies on optimizing the shape and scale of the fishnet apertures as well as the depth of different layers of the composite. A metamaterial is obtained that exhibits an unbroken 552 nm bandwidth of NRI, covering the entire red and infrared regions. Moreover, two fishnet structures perforated with star-like holes are found to render refractive index negative in the yellow and green spectra.

  19. Reversing the direction of space and inverse Doppler effect in positive refraction index media

    Science.gov (United States)

    Sun, Fei; He, Sailing

    2017-01-01

    A negative refractive index medium, in which all spatial coordinates are reversed (i.e. a left-hand triplet is formed) by a spatial folding transformation, can create many novel electromagnetic phenomena, e.g. backward wave propagation, and inversed Doppler effect (IDE). In this study, we use coordinate rotation transformation to reverse only two spatial coordinates (e.g. x‧ and y‧), while keeping z‧ unchanged. In this case, some novel phenomena, e.g. radiation-direction-reversing illusions and IDE, can be achieved in a free space region wrapped by the proposed shell without any negative refractive index medium, which is easier for experimental realization and future applications.

  20. Distance measurement in air without the precise knowledge of refractive index fluctuation

    CERN Document Server

    Cui, Morris; Bhattacharya, Nandini

    2016-01-01

    The accuracy of long distance measurement in air is limited by the fluctuation of refractive index. In this paper, we propose a technique which allows us to measure an absolute distance in air without the knowledge of air turbulence. The technique is based on a femtosecond frequency comb. The fluctuation of the environmental conditions is monitored by two independently operating reference interferometers. The deviations of optical path lengths, caused by the fluctuation of air refractive index, is compensated by feedbacks from the reference interferometers. The measured optical path length is then locked to certain environmental conditions, determined at an optimized moment before the measurement process.

  1. Angle modulated surface plasmon resonance spectrometer for refractive index sensing with enhanced detection resolution

    Science.gov (United States)

    Zhou, Xinlei; Chen, Ke; Li, Li; Peng, Wei; Yu, Qingxu

    2017-01-01

    We design and manufacture an angle modulated surface plasmon resonance (SPR) spectrometer with high detection resolution for refractive index sensing. The presented SPR spectrometer is based on a five-layer Kretchmann configuration. To enhance the sensitivity and resolution of the SPR spectrometer, we introduce a reference beam into the system, which has improved the stability of the system by nearly one order of magnitude. Numerical simulation and experimental study are presented and the results show that a sensitivity of 85 degrees/RIU (refractive index unit) and a good repeatability (standard deviation=3.7×10-6 RIU) have been achieved.

  2. Refractive-index measurement of Si at γ -ray energies up to 2 MeV

    Science.gov (United States)

    Günther, M. M.; Jentschel, M.; Pollitt, A. J.; Thirolf, P. G.; Zepf, M.

    2017-05-01

    The refractive index of silicon at γ -ray energies from 181 to 1959 keV was investigated using the GAMS6 double crystal spectrometer and found to follow the predictions of the classical scattering model. This is in contrast to earlier measurements on the GAMS5 spectrometer, which suggested a sign change in the refractive index for photon energies above 500 keV. We present a reevaluation of the original data from 2011 as well as data from a 2013 campaign in which we show that systematic errors due to diffraction effects of the prism can explain the earlier data.

  3. Application of Photothermal Digital Interferometry for Nonlinear Refractive Index Measurements within a Kerr Approximation

    Science.gov (United States)

    Nalegaev, Sergey S.; Belashov, Andrey V.; Petrov, Nikolay V.

    2017-07-01

    The methodology of Photothermal Interferometry implemented through off-axis digital holography for the nonlinear refractive index measurements of optical media with the thermal mechanism of nonlinearity is presented. An experimental appraisal is done on the example of chlorophyllin 1% solution in ethyl alcohol. It allows us to estimate the effective value of nonlinear refractive index as - 0.65 ·10-3 cm2/W. The comparison of the experimental result with data obtained by means of a reference approach was performed. Possible errors lead to a mismatch between them are highlighted and analyzed.

  4. Simultaneous measurement of group refractive index and thickness of optical samples using optical coherence tomography.

    Science.gov (United States)

    Cheng, Hsu-Chih; Liu, Yi-Cheng

    2010-02-10

    Optical coherence tomography (OCT), based on a Michelson interferometer and utilizing low coherence light as the optical source, is a novel technique for the noninvasive imaging of optical scattering media. A simple OCT scheme based on a 3 x 3 fiber coupler is presented for the simultaneous measurement of the refractive index and thickness of optical samples. The proposed system enables the refractive index and thickness to be determined without any prior knowledge of the sample parameters and is characterized by a simple and compact configuration, a straightforward measurement procedure, and a low cost. The feasibility of the proposed approach is demonstrated experimentally using BK7 and B270 optical glass samples.

  5. Simultaneous measurement of group refractive index and thickness of optical samples using optical coherence tomography

    Energy Technology Data Exchange (ETDEWEB)

    Cheng, Hsu-Chih; Liu, Yi-Cheng

    2010-02-10

    Optical coherence tomography (OCT), based on a Michelson interferometer and utilizing low coherence light as the optical source, is a novel technique for the noninvasive imaging of optical scattering media. A simple OCT scheme based on a 3x3 fiber coupler is presented for the simultaneous measurement of the refractive index and thickness of optical samples. The proposed system enables the refractive index and thickness to be determined without any prior knowledge of the sample parameters and is characterized by a simple and compact configuration, a straightforward measurement procedure, and a low cost. The feasibility of the proposed approach is demonstrated experimentally using BK7 and B270 optical glass samples.

  6. Observation of a multiply ionized plasma with index of refraction greater than one

    Energy Technology Data Exchange (ETDEWEB)

    Filevich, J; Rocca, J J; Marconi, M C; Moon, S J; Nilsen, J; Scofield, J H; Dunn, J; Smith, R F; Keenan, R; Hunter, J R; Shlyaptsev, V N

    2004-10-14

    We present clear experimental evidence showing that the contribution of bound electrons can dominate the index of refraction of laser created plasmas at soft x-ray wavelengths. We report anomalous fringe shifts in soft x-ray laser interferograms of Al laser-created plasmas. The comparison of measured and simulated interferograms show that this results from the dominant contribution of low charge ions to the index of refraction. This usually neglected bound electron contribution can a.ect the propagation of soft x-ray radiation in plasmas and the interferometric diagnostics of plasmas for many elements.

  7. Wavelength Sweep Interferometry for Measuring the Refractive Index and Physical Thickness

    Institute of Scientific and Technical Information of China (English)

    SONG Guiju; WANG Xiangzhao; FANG Zujie

    2001-01-01

    A method combining wavelength sweep interferometry with the Fourior transform technique to perform the separate measurements of the physical thickness and the refractive index is proposed. By converting the optical path difference of the interferometer to the beat frequency of the interference signal we realize the depth scanning without mechanical moving parts. The effect of specimen dispersion is avoided by using a narrow tuning laser diode. For demonstrating this method we measure the physical thickness and the refractive index of an x-cut LiNbO3, BK9 and BK7 glass, and the results consist with the reported values.

  8. High Performance Optical Coatings Utilizing Tailored Refractive Index Nanoporous Thin Films

    Science.gov (United States)

    Poxson, David J.

    Refractive index is perhaps the most important quantity in optics. It is particularly relevant in the field of optical coatings, where the refractive index appears in virtually every optics equation as a figure of merit. Recently it has been demonstrated through control of the deposition angle during oblique-angle electron-beam deposition, nanoporous films of virtually any desired porosity may be accurately deposited. As the porosity of a nanoporous film directly relates to its effective refractive index, the refractive index value of a film may be tailored to any value between that of the bulk material and close to that of air. These two characteristics, namely; (i) tailored-refractive index and (ii) very low-refractive index values close to that of air, offer significant advantages in the design and optical performance in all optical coating applications. In this dissertation we explore optical coating applications whose performance can be greatly enhanced by utilization of a tailored- and low-refractive index nanoporous material system. One such important application is in the design and fabrication of broadband, omnidirectional antireflection (AR) coatings on solar cell devices. To harness the full spectrum of solar energy, Fresnel reflections at the surface of a photovoltaic cell must be reduced as much as possible over the relevant solar wavelength range and over a wide range of incident angles. However, the development of AR coatings embodying omni-directionality over a wide range of wavelengths is challenging. By utilizing the tailored- and low-refractive index properties of the nanoporous material system, in conjunction with a computational genetic algorithm and a predictive quantitative model for the porosity of such nanoporous films, truly optimized AR coatings can be designed and fabricated on solar cells. Here we show that these optimized AR structures demonstrate significant improvement to overall device efficiency. Traditionally, nanoporous films

  9. Time-resolved measurement of the refractive index for photopolymerization processes

    Science.gov (United States)

    Dorkenoo, Kokou; van Wonderen, A. J.; Bulou, Hervé; Romeo, Michelangelo; Crégut, Olivier; Fort, Alain

    2003-09-01

    A double-interferometer technique is employed to examine the dynamics of a photopolymerization process. The dye molecule is eosine Y. The refractive index and the thickness of the photopolymerizable film are measured as a function of time. During the photopolymerization process, the first quantity increases by 2%, while the second quantity decreases by more than 4%. Therefore, the refractive index cannot be measured by means of single-interferometer techniques. By fitting our experimental curves to a rate equation, the quantum yield and the absorption coefficient of the sample can be determined with good accuracy.

  10. Monitoring of temperature-mediated adipose tissue phase transitions by refractive-index measurements

    Science.gov (United States)

    Yanina, I. Yu.; Popov, A. P.; Bykov, A. V.; Tuchin, V. V.

    2014-10-01

    Monitoring of temperature-mediated adipose tissue phase transitions were studied in vitro using an Abbe refractometer. The 1-2-mm thick porcine fat tissues slices were used in the experiments. The observed change in the tissue was associated with several phase transitions of lipid components of the adipose tissue. It was found that overall heating of a sample from the room to higher temperature led to more pronounced and tissue changes in refractive index if other experimental conditions were kept constant. We observed an abrupt change in the refractive index in the temperature range of 37-60 °C.

  11. Relationship between Compostion,Density and Refractive Index for Heavy Metal Fluoride Glasses

    Institute of Scientific and Technical Information of China (English)

    ShaukatS.F; HobsonP.R.; 等

    2001-01-01

    The density and the refractive index for various compositions of heavy metal fluoride(HMF) glasses,used to make low-loss optical wave-guides,have been measured by standard archimedes method and by using as Pulfrich refrctometer respectively.The density as a function of composition is calculated considering the effective volume of the ions contained in the glass to be invariant.The refractive index as a function of composition is also calcuated.based on the Lorenz-Lorentz equation,by computing the electronic polarizability of HMF glasses.All calculated results are in good agreement with the observed data.

  12. Determination of refraction nonlinear index, for effect thermal, of solutions with nanoparticles of gold

    Science.gov (United States)

    Olivares-Vargas, A.; Trejo-Durán, M.; Alvarado-Méndez, E.; Cornejo-Monroy, D.; Mata-Chávez, R. I.; Estudillo-Ayala, J. M.; Castaño-Meneses, V.

    2013-09-01

    Research of nonlinear optical properties of materials for manufacturing opto-electronic devices, had a great growth in the last years. The solutions with nanoparticle metals present nonlinear optical properties. In this work we present the results of characterizing, analyzing and determining the magnitude and sign of the nonlinear refractive index, using the z-scan technique in solutions with nanoparticles of gold, lipoic acid and sodium chloride. We used a continuous Argon laser at 514 nm with variable power, an 18 cms lens, and a chopper. We determined the nonlinear refractive index in the order of 10-9. These materials have potential applications mainly as optical limiters.

  13. Solution of transport equations in layered media with refractive index mismatch using the PN-method.

    Science.gov (United States)

    Phillips, Kevin G; Jacques, Steven L

    2009-10-01

    The PN-method is a spectral discretization technique used to obtain numerical solutions to the radiative transport equation. To the best of our knowledge, the PN-method has yet to be generalized to the case of refractive index mismatch in layered slabs used to numerically simulate skin. Our main contribution is the application of a collocation method that takes into account refractive index mismatch at layer interfaces. The stability, convergence, and accuracy of the method are established. Example calculations demonstrating the flexibility of the method are performed.

  14. The effects of an approximate replacement of one ionospheric refractive index profile by another

    Science.gov (United States)

    Heading, J.

    1980-11-01

    Differential equations for the electric field components are of the second order when electromagnetic waves propagate in an isotropic, plane stratified, inhomogeneous medium. The equations cannot be solved in terms of standard higher transcendental functions when the refractive index varies across stratification planes; an approximation method can be used by replacing the ionospheric refractive index profile by another profile which yields a soluble equation. The exponential, 'sech', Kamke, and inverse square profiles are examined for the left-handed and right-handed circularly polarized propagation modes.

  15. Bragg gratings in surface-core fibers: Refractive index and directional curvature sensing

    Science.gov (United States)

    Osório, Jonas H.; Oliveira, Ricardo; Aristilde, Stenio; Chesini, Giancarlo; Franco, Marcos A. R.; Nogueira, Rogério N.; Cordeiro, Cristiano M. B.

    2017-03-01

    In this paper, we report, to our knowledge, the first extended study of the inscription of Bragg gratings in surface-core fibers and their application in refractive index and directional curvature sensing. The research ranges from fiber fabrication and grating inscription in untapered and tapered fibers to the performance of simulations and sensing measurements. Maximum sensitivities of 40 nm/RIU and 202.7 pm/m-1 were attained in refractive index and curvature measurements respectively. The obtained results compares well to other fiber Bragg grating based devices. Ease of fabrication, robustness and versatility makes surface-core fibers an interesting platform when exploring fiber sensing devices.

  16. "Peak-tracking chip" (PTC) for bulk refractive index sensing and bioarray sensing

    KAUST Repository

    Bougot-Robin, Kristelle

    2013-10-20

    Resonant techniques are of wide interest to detect variation of effective refractive index at a chip surface. Both Surface Plasmon Resonance (SPR) and dielectric resonant waveguide (RWGs) can be exploited. Through their design, RWGs allow more flexibility (size of the biomolecule to detect, detection angle…). Using specially designed RWG “Peak-tracking chip”, we propose to use spatial information from a simple monochromatic picture as a new label-free bioarray technique. We discuss robustness, sensitivity, multiplex detection, fluidic integration of the technique and illustrate it through bulk refractive index sensing as well as specific recognition of DNA fragment from gyrase A.

  17. Traversal of electromagnetic pulses through dispersive media with negative refractive index

    Science.gov (United States)

    Nanda, L.; Ramakrishna, S. A.

    2017-05-01

    We investigate the traversal of electromagnetic pulses through dispersive media with negative refractive index in such a way that no resonant effects come into play. It has been verified that for evanescent waves, the definitions of the group delay and the reshaping delay times get interchanged in comparison to the propagating waves. We show that for a negative refractive index medium (NRM) with ɛ(ω)=μ(ω), the reshaping delay time identically vanishes for propagating waves. The total delay time in NRM is otherwise contributed by both the group and the reshaping delay times, whereas for the case of broadband pulses in NRM the total delay time is always subluminal.

  18. Three-dimensional negative index of refraction at optical frequencies by coupling plasmonic waveguides.

    Science.gov (United States)

    Verhagen, Ewold; de Waele, René; Kuipers, L; Polman, Albert

    2010-11-26

    We identify a route towards achieving a negative index of refraction at optical frequencies based on coupling between plasmonic waveguides that support backwards waves. We show how modal symmetry can be exploited in metal-dielectric waveguide pairs to achieve negative refraction of both phase and energy. Control of waveguide coupling yields a metamaterial consisting of a one-dimensional multilayer stack that exhibits an isotropic index of -1 at a free-space wavelength of 400 nm. The concepts developed here may inspire new low-loss metamaterial designs operating close to the metal plasma frequency.

  19. A refractive index sensor design based on grating-assisted coupling between a strip waveguide and a slot waveguide.

    Science.gov (United States)

    Liu, Qing; Kee, Jack Sheng; Park, Mi Kyoung

    2013-03-11

    In this paper, we present a design of a refractive index sensor based on grating-assisted light coupling between a strip waveguide and a slot waveguide. The slot waveguide serves as the sensing waveguide while the strip waveguide is used for light launching and detection. The wavelength at which the light is coupled from the strip waveguide to the slot waveguide serves as a measure of the refractive index of the external medium. The sensitivity of the sensor is ~1.46 × 10(3) nm/RIU (refractive index unit) and can be almost doubled by isolating the strip waveguide from the external medium. The effects of the slot-waveguide parameters on the sensitivity have also been investigated. In particular, it is found that the sensor can achieve extraordinarily high sensitivity (on the order of 10(5) nm/RIU) when the group indices of two waveguides are close. The temperature dependence of the sensor is also investigated and a sensor with very low temperature dependence can be achieved with a polymer isolation layer.

  20. Determination of the refractive index of glucose-ethanol-water mixtures using spectroscopic refractometry near the critical angle.

    Science.gov (United States)

    Sobral, H; Peña-Gomar, M

    2015-10-01

    A spectroscopic refractometer was used to investigate the dispersion curves of ethanol and D-glucose solutions in water near the critical angle; here, the reflectivity was measured using a white source. Dispersion curves were obtained in the 320-1000 nm wavelength range with a resolution better than 10(-4) for the refractive index, n. The differential refractive index is measured as a function of wavelength, and a simple expression is proposed to obtain the refractive index of the glucose-ethanol-water ternary system. Using this expression, combined with the experimental differential refractive index values, the concentrations of individual components can be calculated.

  1. Equation of state, refractive index and polarizability of compressed water to 7 GPa and 673 K.

    Science.gov (United States)

    Sanchez-Valle, Carmen; Mantegazzi, Davide; Bass, Jay D; Reusser, Eric

    2013-02-07

    The equation of state (EoS), refractive index n, and polarizability α of water have been determined up to 673 K and 7 GPa from acoustic velocity measurements conducted in a resistively heated diamond anvil cell using Brillouin scattering spectroscopy. Measured acoustic velocities compare favorably with previous experimental studies but they are lower than velocities calculated from the extrapolation of the IAPWS95 equation of state above 3 GPa at 673 K and deviations increase up to 6% at 7 GPa. Densities calculated from the velocity data were used to propose an empirical EoS suitable in the 0.6-7 GPa and 293-673 K range with a total estimated uncertainty of 0.5% or less. The density model and thermodynamic properties derived from the experimental EoS have been compared to several EoS proposed in the literature. The IAPWS95 EoS provides good agreement, although underestimates density by up to 1.2% at 7 GPa and 673 K and the thermodynamic properties deviate greatly (10%-20%) outside the estimated uncertainties above 4 GPa. The refractive index n of liquid water increases linearly with density and do not depend intrinsically on temperature. The polarizability decreases with pressure by less than 4% within the investigated P-T range, suggesting strong intermolecular interactions in H(2)O that are consistent with the prevalence of the hydrogen bond network in the fluid. The results will allow the refinement of interaction potentials that consider polarization effects for a better understanding of solvent-solvent and ion-solvent interactions in aqueous fluids at high pressure and temperature conditions.

  2. Nonlinear refractive index measurements of glasses and crystals

    Science.gov (United States)

    Adair, R.; Chase, L. L.; Payne, S. A.

    1987-12-01

    We have measured the nonlinear index for numerous glasses and crystals with the goal of determining the material properties that contribute to the magnitude and dispersion of n sub 2. We have found that a nearly-degenerate three-wave-mixing (TWM) process is the most useful method since it can provide both rapid and accurate n sub 2 measurements.

  3. Generation of J_0-Bessel-Gauss beam by a heterogeneous refractive index map

    KAUST Repository

    San-Román-Alerigi, Damián P.

    2012-07-01

    In this paper, we present the theoretical studies of a refractive index map to implement a Gauss to a J0-Bessel-Gauss convertor. We theoretically demonstrate the viability of a device that could be fabricated on a Si/Si1-yOy/Si1-x-yGexCy platform or by photo-refractive media. The proposed device is 200 ?m in length and 25 ?m in width, and its refractive index varies in controllable steps across the light propagation and transversal directions. The computed conversion efficiency and loss are 90%, and -0.457 dB, respectively. The theoretical results, obtained from the beam conversion efficiency, self-regeneration, and propagation through an opaque obstruction, demonstrate that a two-dimensional (2D) graded index map of the refractive index can be used to transform a Gauss beam into a J0-Bessel-Gauss beam. To the best of our knowledge, this is the first demonstration of such beam transformation by means of a 2D index-mapping that is fully integrable in silicon photonics based planar lightwave circuits (PLCs). The concept device is significant for the eventual development of a new array of technologies, such as micro optical tweezers, optical traps, beam reshaping and nonlinear beam diode lasers. © 2012 Optical Society of America.

  4. Single-mode optical waveguides on native high-refractive-index substrates

    Science.gov (United States)

    Grote, Richard R.; Bassett, Lee C.

    2016-10-01

    High-refractive-index semiconductor optical waveguides form the basis for modern photonic integrated circuits (PICs). However, conventional methods for achieving optical confinement require a thick lower-refractive-index support layer that impedes large-scale co-integration with electronics and limits the materials on which PICs can be fabricated. To address this challenge, we present a general architecture for single-mode waveguides that confine light in a high-refractive-index material on a native substrate. The waveguide consists of a high-aspect-ratio fin of the guiding material surrounded by lower-refractive-index dielectrics and is compatible with standard top-down fabrication techniques. This letter describes a physically intuitive, semi-analytical, effective index model for designing fin waveguides, which is confirmed with fully vectorial numerical simulations. Design examples are presented for diamond and silicon at visible and telecommunications wavelengths, respectively, along with calculations of propagation loss due to bending, scattering, and substrate leakage. Potential methods of fabrication are also discussed. The proposed waveguide geometry allows PICs to be fabricated alongside silicon CMOS electronics on the same wafer, removes the need for heteroepitaxy in III-V PICs, and will enable wafer-scale photonic integration on emerging material platforms such as diamond and SiC.

  5. Generation of J0-Bessel-Gauss beam by a heterogeneous refractive index map.

    Science.gov (United States)

    San-Roman-Alerigi, Damian P; Ng, Tien K; Zhang, Yaping; Ben Slimane, Ahmed; Alsunaidi, Mohammad; Ooi, Boon S

    2012-07-01

    In this paper, we present the theoretical studies of a refractive index map to implement a Gauss to a J(0)-Bessel-Gauss convertor. We theoretically demonstrate the viability of a device that could be fabricated on a Si/Si(1-y)O(y)/Si(1-x-y)Ge(x)C(y) platform or by photo-refractive media. The proposed device is 200 μm in length and 25 μm in width, and its refractive index varies in controllable steps across the light propagation and transversal directions. The computed conversion efficiency and loss are 90%, and -0.457 dB, respectively. The theoretical results, obtained from the beam conversion efficiency, self-regeneration, and propagation through an opaque obstruction, demonstrate that a two-dimensional (2D) graded index map of the refractive index can be used to transform a Gauss beam into a J(0)-Bessel-Gauss beam. To the best of our knowledge, this is the first demonstration of such beam transformation by means of a 2D index-mapping that is fully integrable in silicon photonics based planar lightwave circuits (PLCs). The concept device is significant for the eventual development of a new array of technologies, such as micro optical tweezers, optical traps, beam reshaping and nonlinear beam diode lasers.

  6. Broadband giant-refractive-index material based on mesoscopic space-filling curves

    Science.gov (United States)

    Chang, Taeyong; Kim, Jong Uk; Kang, Seung Kyu; Kim, Hyowook; Kim, Do Kyung; Lee, Yong-Hee; Shin, Jonghwa

    2016-08-01

    The refractive index is the fundamental property of all optical materials and dictates Snell's law, propagation speed, wavelength, diffraction, energy density, absorption and emission of light in materials. Experimentally realized broadband refractive indices remain 1,800 resulting from a mesoscopic crystal with a dielectric constant greater than three million. This gigantic enhancement effect originates from the space-filling curve concept from mathematics. The principle is inherently very broad band, the enhancement being nearly constant from zero up to the frequency of interest. This broadband giant-refractive-index medium promises not only enhanced resolution in imaging and raised fundamental absorption limits in solar energy devices, but also compact, power-efficient components for optical communication and increased performance in many other applications.

  7. Fiber inline Michelson interferometer fabricated by CO2 laser irradiation for refractive index sensing

    Science.gov (United States)

    Wu, Hongbin; Yuan, Lei; Zhao, Longjiang; Cao, Zhitao; Wang, Peng

    2014-03-01

    A compact Michelson interferometer (MI) in a single-mode fiber (SMF) is successfully formed by CO2 laser irradiation to measure refractive index (RI) values. The fiber inline MI mainly consists of two parts: one is the waist region in fiber formed by CO2 laser irradiation and the other one is the fiber tip end facet with pure gold sputter coating. Based on the MI theory, the interference signal is generate between the core mode and the cladding mode excited by the core mode at the waist region. Reflective spectra at two different interference lengths of 5mm and 15mm are given and the calculated lengths based on theory are well verified. After the measurements of matching liquids with seven different refractive indices, the RI sensitivity of the MI sample is tested of -197.3+/-19.1nm/RIU (refractive index unit), which suggests well potential application in RI sensing.

  8. A low-reflection coaxial tunable attenuator based on zero refractive index metamaterial

    Science.gov (United States)

    Zhang, Kai-Lun; Hou, Zhi-Ling; Wang, Chan-Yuan; Kong, Ling-Bao; Bian, Xin-Ming

    2016-11-01

    In this paper, we design a low-reflection coaxial tunable attenuator with a maximum attenuation of -50 dB by use of zero refractive index metamaterial. Almost no reflection is observed from input port of the proposed structure, due to the easily accessible impedance matching derived from the use of zero refractive index metamaterial. The relationship between attenuation and the air gap width can be well described by an equivalent circuit model. Interestingly, the ratio of input to output voltage is linearly related to the gap width due to the eliminated fringing capacitance by zero-refraction metamaterial, which makes it easy to achieve accurate calibration of the proposed attenuator. The low reflection and linear relationships enable the proposed attenuator to hold promising potential for practical applications.

  9. Internal characteristics of refractive-index matched debris flows

    Science.gov (United States)

    Gollin, Devis; Bowman, Elisabeth; Sanvitale, Nicoletta

    2016-04-01

    Debris flows are channelized masses of granular material saturated with water that travel at high speeds downslope. Their destructive character represents a hazard to lives and properties, especially in regions of high relief and runoff. The characteristics that distinguish their heterogeneous, multi-phase, nature are numerous: non-uniform surge formation, particle size ranging from clay to boulders, flow segregation with larger particles concentrating at the flow front and fluid at the tail making the composition and volume of the bulk varying with time and space. These aspects render these events very difficult to characterise and predict, in particular in the area of the deposit spread or runout - zones which are generally of most interest in terms of human risk. At present, considerable gaps exist in our understanding of the flow dynamics of debris flows, which originates from their complex motion and relatively poor observations available. Flume studies offer the potential to examine in detail the behaviour of model debris flows, however, the opaque nature of these flows is a major obstacle in gaining insight of their internal behaviour. Measurements taken at the sidewalls may be poorly representative leading to incomplete or misleading results. To probe internally to the bulk of the flow, alternative, nonintrusive techniques can be used, enabling, for instance, velocities and solid concentrations within the flowing material to be determined. We present experimental investigations into polydisperse granular flows of spherical immersed particles down an inclined flume, with specific attention directed to their internal behavior. To this end, the refractive indices of solids and liquid are closely matched allowing the two phases to be distinguished. Measurements are then made internally at a point in the channel via Plane Laser Induced Fluorescence, Particle Tracking Velocimetry, PTV and Particle Image Velocimetry, PIV. The objective is to to increase our

  10. Negative refractive index metamaterials using only metallic cut wires.

    Science.gov (United States)

    Sellier, Alexandre; Burokur, Shah Nawaz; Kanté, Boubacar; de Lustrac, André

    2009-04-13

    We present, design and analyze a novel planar Left-Handed (LH) metamaterial at microwave frequencies. This metamaterial is composed of only metallic cut wires and is used under normal-to-plane incidence. Using Finite Element Method (FEM) based simulations and microwave experiments, we have investigated the material properties of the structure. Simultaneous negative values are observed for the permittivity epsilon and permeability mu by the inversion method from the transmission and reflection responses. A negative index n is verified in a bulk prism engineered by stacking several layers of the metamaterial. Our work demonstrates the feasibility of a LH metamaterial composed of only cut wires.

  11. Bulk photons in Asymmetrically Warped Space-times and Non-trivial Vacuum Refractive Index

    CERN Document Server

    Farakos, K; Pasipoularides, P

    2009-01-01

    We consider asymmetrically warped brane models, or equivalently brane models where the background metric is characterized by different time and space warp factors. The main feature of these models is that 4D Lorentz symmetry is violated for fields which propagate in the bulk, such as gravitons. In this paper we examine the case of bulk photons in asymmetrically warped brane models. Although our results are general, we examine here two specific but characteristic solutions: 1) AdS-Schwarzschild 5D Black Hole solution and 2) AdS-Reissner Nordstrom 5D Black Hole solution. We show that the standard Lorentz invariant dispersion relation for 4D photons is corrected by nonlinear terms which lead to an Energy-dependent speed of light. Specifically, we obtain a sub-luminous Energy-dependent refractive index of the form n_{eff}(omega)=1+c_G omega^2, where omega is the energy of the photon, and the factor c_G is always positive and depends on the free parameters of the model. Finally, comparing the results with recent d...

  12. Bi-layer cross chiral structure with strong optical activity and negative refractive index.

    Science.gov (United States)

    Dong, Jianfeng; Zhou, Jiangfeng; Koschny, Thomas; Soukoulis, Costas

    2009-08-03

    The properties of periodic pairs of mutually twisted metallic (silver) crosses separated by dielectric layer have been investigated by numerical simulation. The results show that the exceptionally strong polarization rotation and circular dichroism, negative permeability and negative refractive index are found at the infrared communication wavelength (1.55 microm).

  13. A study on refractive index sensors based on optical micro-ring resonators

    Science.gov (United States)

    Tsigaridas, Georgios N.

    2017-09-01

    In this work, the behavior of refractive index sensors based on optical micro-ring resonators is studied in detail. Using a result of waveguide perturbation theory in combination with numerical simulations, the optimum design parameters of the system, maximizing the sensitivity of the sensor, are determined. It is found that, when optimally designed, the sensor can detect relative refractive index changes of the order of Δ n/ n≈3×10-4, assuming that the experimental setup can detect relative wavelength shifts of the order of Δ λ/λ≈3×10-5. The behavior of the system as bio-sensor has also been examined. It is found that, when optimally designed, the system can detect refractive index changes of the order of Δ n≈10-3 for a layer thickness of t=10 nm, and changes in the layer thickness of the order of λ t≈0.24 nm, for a refractive index change of Δ n=0.05.

  14. Concurrency of anisotropy and spatial dispersion in low refractive index dielectric composites

    CERN Document Server

    Ushkov, Andrey A

    2016-01-01

    The article demonstrates uncommon manifestation of spatial dispersion in low refractive index contrast 3D periodic dielectric composites with periods of about one tenth of the wavelength. First principles simulations by the well established plane wave method reveal that spatial dispersion leads to appearance of additional optical axes and tends to compensate anisotropy in certain directions.

  15. Variable Refractive Index Effects on Radiation in Semitransparent Scattering Multilayered Regions

    Science.gov (United States)

    Siegel, R.; Spuckler, C. M.

    1993-01-01

    A simple set of equations is derived for predicting the temperature distribution and radiative energy flow in a semitransparent layer consisting of an arbitrary number of laminated sublayers that absorb, emit, and scatter radiation. Each sublayer can have a different refractive index and optical thickness. The plane composite region is heated on each exterior side by a different amount of incident radiation. The results are for the limiting case where heat conduction within the layers is very small relative to radiative transfer, and is neglected. The interfaces are assumed diffuse, and all interface reflections are included in the analysis. The thermal behavior is readily calculated from the analytical expressions that are obtained. By using many sublayers, the analytical expressions provide the temperature distribution and heat flow for a diffusing medium with a continuously varying refractive index, including internal reflection effects caused by refractive index gradients. Temperature and heat flux results are given to show the effect of variations in refractive index and optical thickness through the multilayer laminate.

  16. Experimental determination of the effective refractive index in strongly scattering media

    NARCIS (Netherlands)

    Gómez Rivas, J.; Gomez Rivas, J.; Hau, D.H.; Imhof, A.; Sprik, R.; Bret, B.P.J.; Johnson, P.M.; Hijmans, T.W.; Lagendijk, Aart

    2003-01-01

    Measurements of the angular-resolved-optical transmission through strongly scattering samples of porous gallium phosphide are described. Currently porous GaP is the strongest-scattering material for visible light. From these measurements the effective refractive index and the average reflectivity at

  17. Refractive Index Sensing Using a Three-Port Interferometer and Comparison with Ring Resonators

    NARCIS (Netherlands)

    Gulik, R.J.J. van; Boer, B.M. de; Harmsma, P.J.

    2017-01-01

    In this paper, we compare ring resonator and three-port Mach-Zehnder Interferometer (MZI) devices fabricated on silicon-on-insulator for the purpose of refractive index sensing. Their respective sensitivities and limits of detection (LOD) were determined with NaCl solutions. A sensitivity of 113.07

  18. Sensitivity of photonic crystal fiber grating sensors: biosensing, refractive index, strain, and temperature sensing

    DEFF Research Database (Denmark)

    Rindorf, Lars Henning; Bang, Ole

    2008-01-01

    We study the sensitivity of fiber grating sensors in the applications of strain, temperature, internal label-free biosensing, and internal refractive index sensing. New analytical expressions for the sensitivities, valid for photonic crystal fibers are rigorously derived. These are generally valid...

  19. Quantifying the refractive index dispersion of a pigmented biological tissue using Jamin-Lebedeff interference microscopy

    NARCIS (Netherlands)

    Stavenga, Doekele G.; Leertouwer, Hein L.; Wilts, Bodo D.

    Jamin-Lebedeff polarizing interference microscopy is a classical method for determining the refractive index and thickness of transparent tissues. Here, we extend the application of this method to pigmented, absorbing biological tissues, based on a theoretical derivation using Jones calculus. This

  20. Spatial refractive index sensor using whispering gallery modes in an optically trapped microsphere

    NARCIS (Netherlands)

    Zijlstra, P.; Zijlstra, Peter; van der Molen, K.L.; Mosk, Allard

    2007-01-01

    The authors propose the use of an optically trapped, dye doped polystyrene microsphere for spatial probing of the refractive index at any position in a fluid. Using the dye embedded in the microsphere as an internal broadband excitation source the authors eliminated the need for a tunable excitation

  1. Performance of integrated optical microcavities for refractive index and fluorescence sensing

    NARCIS (Netherlands)

    Krioukov, E.; Greve, Jan; Otto, Cornelis

    2003-01-01

    The performance of a novel sensor based on an integrated optical (IO) disk microcavity (MC) is theoretically studied. The MC is a resonant waveguide structure in which multiple interference of a guided mode occurs. At resonance, the MC is extremely sensitive to refractive index changes and it

  2. Analytical Modelling of a Refractive Index Sensor Based on an Intrinsic Micro Fabry-Perot Interferometer

    Directory of Open Access Journals (Sweden)

    Everardo Vargas-Rodriguez

    2015-10-01

    Full Text Available In this work a refractive index sensor based on a combination of the non-dispersive sensing (NDS and the Tunable Laser Spectroscopy (TLS principles is presented. Here, in order to have one reference and one measurement channel a single-beam dual-path configuration is used for implementing the NDS principle. These channels are monitored with a couple of identical optical detectors which are correlated to calculate the overall sensor response, called here the depth of modulation. It is shown that this is useful to minimize drifting errors due to source power variations. Furthermore, a comprehensive analysis of a refractive index sensing setup, based on an intrinsic micro Fabry-Perot Interferometer (FPI is described. Here, the changes over the FPI pattern as the exit refractive index is varied are analytically modelled by using the characteristic matrix method. Additionally, our simulated results are supported by experimental measurements which are also provided. Finally it is shown that by using this principle a simple refractive index sensor with a resolution in the order of 2.15 × 10−4 RIU can be implemented by using a couple of standard and low cost photodetectors.

  3. Analytical modelling of a refractive index sensor based on an intrinsic micro Fabry-Perot interferometer.

    Science.gov (United States)

    Vargas-Rodriguez, Everardo; Guzman-Chavez, Ana D; Cano-Contreras, Martin; Gallegos-Arellano, Eloisa; Jauregui-Vazquez, Daniel; Hernández-García, Juan C; Estudillo-Ayala, Julian M; Rojas-Laguna, Roberto

    2015-10-15

    In this work a refractive index sensor based on a combination of the non-dispersive sensing (NDS) and the Tunable Laser Spectroscopy (TLS) principles is presented. Here, in order to have one reference and one measurement channel a single-beam dual-path configuration is used for implementing the NDS principle. These channels are monitored with a couple of identical optical detectors which are correlated to calculate the overall sensor response, called here the depth of modulation. It is shown that this is useful to minimize drifting errors due to source power variations. Furthermore, a comprehensive analysis of a refractive index sensing setup, based on an intrinsic micro Fabry-Perot Interferometer (FPI) is described. Here, the changes over the FPI pattern as the exit refractive index is varied are analytically modelled by using the characteristic matrix method. Additionally, our simulated results are supported by experimental measurements which are also provided. Finally it is shown that by using this principle a simple refractive index sensor with a resolution in the order of 2.15 × 10(-4) RIU can be implemented by using a couple of standard and low cost photodetectors.

  4. Forces from highly focused laser beams: modeling, measurement and application to refractive index measurements

    CERN Document Server

    Knoener, G; Nieminen, T A; Heckenberg, N R; Rubinsztein-Dunlop, H

    2007-01-01

    The optical forces in optical tweezers can be robustly modeled over a broad range of parameters using generalsed Lorenz-Mie theory. We describe the procedure, and show how the combination of experimental measurement of properties of the trap coupled with computational modeling, can allow unknown parameters of the particle - in this case, the refractive index - to be determined.

  5. Design of a Michelson Interferometer for Quantitative Refraction Index Profile Measurements

    NARCIS (Netherlands)

    Nijholt, J.L.M.

    1998-01-01

    This book describes the theoretical design of a three camera Michelson interferometer set-up for quantitative refractive index measuerments. Although a two camera system is easier to align and less expensive, a three camera interferometer is preferred because the expected measuring accuracy is much

  6. Effect of refractive index on the fluorescence lifetime of green fluorescent protein.

    Science.gov (United States)

    Tregidgo, Carolyn; Levitt, James A; Suhling, Klaus

    2008-01-01

    The average fluorescence lifetime of the green fluorescent protein (GFP) in solution is a function of the refractive index of its environment. We report that this is also the case for GFP-tagged proteins in cells. Using time-correlated single-photon counting (TCSPC)-based fluorescence lifetime imaging (FLIM) with a confocal scanning microscope, images of GFP-tagged proteins in cells suspended in different refractive index media are obtained. It is found that the average fluorescence lifetime of GFP decreases on addition of glycerol or sucrose to the media in which the fixed cells are suspended. The inverse GFP lifetime is proportional to the refractive index squared. This is the case for GFP-tagged major histocompatibility complex (MHC) proteins with the GFP located inside the cytoplasm, and also for GPI-anchored GFP that is located outside the cell membrane. The implications of these findings are discussed with regard to total internal reflection fluorescence (TIRF) techniques where the change in refractive index is crucial in producing an evanescent wave to excite fluorophores near a glass interface. Our findings show that the GFP fluorescence lifetime is shortened in TIRF microscopy in comparison to confocal microscopy.

  7. Refractive Index Sensing of Green Fluorescent Proteins in Living Cells Using Fluorescence Lifetime Imaging Microscopy

    NARCIS (Netherlands)

    Manen, van Henk-Jan; Verkuijlen, Paul; Wittendorp, Paul; Subramaniam, Vinod; Berg, van den Timo K.; Roos, Dirk; Otto, Cees

    2008-01-01

    We show that fluorescence lifetime imaging microscopy (FLIM) of green fluorescent protein (GFP) molecules in cells can be used to report on the local refractive index of intracellular GFP. We expressed GFP fusion constructs of Rac2 and gp91phox, which are both subunits of the phagocyte NADPH oxidase

  8. Radial variation of refractive index, plasma frequency and phase velocity in laser induced air plasma

    CSIR Research Space (South Africa)

    Mathuthu, M

    2006-12-01

    Full Text Available induced air plasma to study the spatial variation of plasma parameters in the axial direction of the laser beam. In this paper, the authors report investigation on the radial variation of the refractive index, plasma frequency, and phase velocity of a...

  9. Optical Waveguides with Compound Multiperiodic Grating Nanostructures for Refractive Index Sensing

    Directory of Open Access Journals (Sweden)

    Lars Thorben Neustock

    2016-01-01

    Full Text Available The spectral characteristics and refractive index sensitivity of compound multiperiodic grating waveguides are investigated in theory and experiment. Compound gratings are formed by superposition of two or more monoperiodic gratings. Compared to monoperiodic photonic crystal waveguides, compound grating waveguides offer more degrees of design freedom by choice of component grating periods and duty cycles. Refractive index sensing is achieved by evaluating the wavelength or intensity of guided mode resonances in the reflection spectrum. We designed, fabricated, and characterized 24 different compound multiperiodic nanostructured waveguides for refractive index sensing. Simulations are carried out with the Rigorous Coupled Wave Algorithm (RCWA. The resulting spectra, resonance sensitivities, and quality factors are compared to monoperiodic as well as to three selected aperiodic nanostructures (Rudin-Shapiro, Fibonacci, and Thue-Morse. The refractive index sensitivity of the TE resonances is similar for all types of investigated nanostructures. For the TM resonances the compound multiperiodic nanostructures exhibit higher sensitivity values compared to the monoperiodic nanostructure and similar values as the aperiodic nanostructures. No significant influence of the compound grating duty cycles on the sensitivity is observed.

  10. Engineering high refractive index sensitivity through the internal and external composition of bimetallic nanocrystals.

    Science.gov (United States)

    Smith, Alison F; Harvey, Samantha M; Skrabalak, Sara E; Weiner, Rebecca G

    2016-10-14

    High refractive index sensitivity (RIS) of branched Au-Pd nanocrystals (NCs) is engineered through lowering the dielectric dispersion at the NC resonant wavelength with internal or external atomic % Pd. To our knowledge, these NCs display the highest ensemble RIS measurement for colloids with LSPR maximum band positions ≤900 nm, and these results are corroborated with FDTD computations.

  11. Spatial refractive index sensor using whispering gallery modes in an optically trapped microsphere

    NARCIS (Netherlands)

    Zijlstra, Peter; Molen, van der Karen L.; Mosk, Allard P.

    2007-01-01

    The authors propose the use of an optically trapped, dye doped polystyrene microsphere for spatial probing of the refractive index at any position in a fluid. Using the dye embedded in the microsphere as an internal broadband excitation source the authors eliminated the need for a tunable excitation

  12. PASSIVELY ESTIMATING INDEX OF REFRACTION FOR SPECULAR REFLECTORS USING POLARIMETRIC HYPERSPECTRAL IMAGING

    Science.gov (United States)

    2016-12-22

    Brunet. An experimental study of angular effects on surface temperature for various plant canopies and bare soils. Agri- cultural and Forest Meteorology ...W. Cleek. The effect of temperature and pressure on the refractive index of some oxide glasses. Journal of Research of the National Bureau of

  13. Research Advances in Detection Techniques of High Performance Liquid Chromatography-Refractive Index Detector

    Institute of Scientific and Technical Information of China (English)

    Huo; Fang; Zhang; Zhimei; Wang; Jianjun; Guo; Shijin; Zhou; Chunfeng; Fu; Shijun

    2014-01-01

    As a highly sensitive and stable detector,refractive index detector is usually used for quantitative detection of substances such as polymer,sugar and organic acid. The research reviewed the application of HPLC-RID in the fields of quantitative determination of medicine and food,in order to lay a foundation for wider use of RID.

  14. Refractive index sensing characteristics of dual resonances in rectangular fractal nano-apertures

    Science.gov (United States)

    Aslan, Ekin; Turkmen, Mustafa

    2015-08-01

    Aperture based sensing platforms can be useful for both gas and bio-sensing applications. In this study, we investigate the refractive index sensing characteristics of dual resonances in rectangular fractal nanoapertures. By taking the advantages coming from its aperture based nature and dual band resonant behavior, one can use this platform to detect two different chemical/bio-molecules simultaneously. For the numerical analysis, we study the rectangular fractal nanoantenna array through the finite difference time domain (FDTD) method. We also introduce a fine tuning mechanism for adjusting the resonance frequencies which is important for the sensing applications. Then, we demonstrate the results of refractive index sensitivity tests in order to show the behavior of the structure against the refractive index changes. In these tests, we embed our sensing platform into different cladding media and obtain the refractive index sensing characteristics of dual resonances. Due to the dual-resonant behavior with easily accessible ultra-high-field localization characteristics, the proposed sensing platform can be a good candidate for ultra-sensitive chemical- and bio-sensing applications.

  15. Photoinduced refractive index change and absorption bleaching in poly(methylphenylsilane) under varied atmospheres.

    Energy Technology Data Exchange (ETDEWEB)

    Potter, Barrett George, Jr. (University of Arizona, Tucson, AZ); Simmons-Potter, Kelly (University of Arizona, Tucson, AZ); Chandra, Haripin (University of Arizona, Tucson, AZ); Thomes, William Joseph, Jr.; Jamison, Gregory Marks

    2005-06-01

    Polysilane materials exhibit large photo-induced refractive index changes under low incident optical fluences, making them attractive candidates for applications in which rapid patterning of photonic device structures is desired immediately prior to their use. This agile fabrication strategy for integrated photonics inherently requires that optical exposure, and associated material response, occurs in nonlaboratory environments, motivating the study of environmental conditions on the photoinduced response of the material. The present work examines the impact of atmosphere on the photosensitive response of poly(methylphenylsilane) (PMPS) thin films in terms of both photoinduced absorption change and refractive index modification. Material was subjected to UV light exposure resonant with the lowest energy optical transition associated with the conjugated Si-Si backbone. Exposures were performed in both aerobic and anaerobic atmospheres (oxygen, air, nitrogen, and 5% H{sub 2}/95% N{sub 2}). The results clearly demonstrate that the photosensitive response of this model polysilane material was dramatically affected by local environment, exhibiting a photoinduced refractive index change, when exposed under an oxygen containing atmosphere, that was twice that observed under anaerobic conditions. This effect is discussed in terms of photo-oxidation processes within the polysilane structure and in the context of the need for predictable photosensitive refractive index change in varied photoimprinting environments.

  16. High-refractive index particles in counter-propagating optical tweezers - manipulation and forces

    NARCIS (Netherlands)

    Horst, Astrid van der

    2006-01-01

    With a tightly focused single laser beam, also called optical tweezers, particles of a few nanometers up to several micrometers in size can be trapped and manipulated in 3D. The size, shape and refractive index of such colloidal particles are of influence on the optical forces exerted on them in the

  17. Quantifying the refractive index dispersion of a pigmented biological tissue using Jamin-Lebedeff interference microscopy

    NARCIS (Netherlands)

    Stavenga, Doekele G.; Leertouwer, Hein L.; Wilts, Bodo D.

    2013-01-01

    Jamin-Lebedeff polarizing interference microscopy is a classical method for determining the refractive index and thickness of transparent tissues. Here, we extend the application of this method to pigmented, absorbing biological tissues, based on a theoretical derivation using Jones calculus. This n

  18. Glasses having a low non-linear refractive index for laser applications

    Energy Technology Data Exchange (ETDEWEB)

    Faulstich, Marga (Mainz, DE); Jahn, Walter (Ingelheim, DE); Krolla, Georg (Mainz, DE); Neuroth, Norbert (Mainz-Mombach, DE)

    1980-01-01

    Glass composition ranges are described which permit the introduction of laser activators into fluorphosphate glass with exceptionally high fluorine content while forming glasses of high crystallization stability and permitting the realization of large melt volumes. The high fluorine content imparts to the glasses an exceptionally low nonlinear refractive index n.sub.2 down to O,4 .times.10.sup.-13 esu.

  19. Methods to calibrate and scale axial distances in confocal microscopy as a function of refractive index

    NARCIS (Netherlands)

    Besseling, T. H.; Jose, J.; Blaaderen, A. Van

    2015-01-01

    Accurate distance measurement in 3D confocal microscopy is important for quantitative analysis, volume visualization and image restoration. However, axial distances can be distorted by both the point spread function (PSF) and by a refractive-index mismatch between the sample and immersion liquid, wh

  20. Probing multifractality in depth-resolved refractive index fluctuations in biological tissues using backscattering spectral interferometry

    Science.gov (United States)

    Das, Nandan Kumar; Dey, Rajib; Chakraborty, Semanti; Panigrahi, P. K.; Ghosh, Nirmalya

    2016-12-01

    Fourier domain low coherence interferometry is a promising method for quantification of the depth distribution of the refractive index in a layered scattering medium such as biological tissue. Here, we have explored backscattering spectral interferometric measurement in combination with multifractal detrended fluctuation analysis to probe and quantify multifractality in depth distribution of the refractive index in tissue. The depth resolution of the experimental system was validated on model systems comprising of polystyrene microspheres and mica sheet, and was initially tested on turbid collagen layer, the main building blocks of the connective tissue. Following successful evaluation, the method was applied on ex vivo tissues of human cervix. The derived multifractal parameters of depth-resolved index fluctuations of tissue, namely, the generalized Hurst exponent and the width of the singularity spectrum showed interesting differences between tissues having different grades of precancers. The depth-resolved index fluctuations exhibited stronger multifractality with increasing pathological grades, demonstrating its promise as a potential biomarker for precancer detection.

  1. Generation of J0-Bessel-Gauss Beam by an heterogeneous refractive index map

    CERN Document Server

    Alerigi, Damian P San Roman; Benslimane, Ahmed; Zhang, Yaping; Alsunaidi, Mohammad; Ooi, Boon S; 10.1364/JOSAA.29.001252

    2012-01-01

    In this paper, we present the theoretical studies of a refractive index map to implement a Gauss to J0-Bessel-Gauss convertor. We theoretically demonstrate the viability of such device by solving the inverse electromagnetic problem. The computed conversion e?ficiency is 90%. The theoretical results, obtained from the beam conversion efi?ciency, self-regeneration, and propagation through an opaque obstruction; demonstrate that a 2D graded index map of the refractive index can be used to transform a Gauss beam into a J0-Bessel-Gauss beam. To the best of our knowledge, this is the ?rst demonstration of such beam transformation by means of a 2D index-mapping which is fully integrable in silicon photonics based planar lightwave circuits (PLC). The concept device is signi?cant for the eventual development of a new array of technologies, such as micro optical tweezers, optical traps, beam reshaping and non-linear beam diode lasers.

  2. Deposited metamaterial thin film with negative refractive index and permeability in the visible regime.

    Science.gov (United States)

    Jen, Yi-Jun; Chen, Chih-Hui; Yu, Ching-Wei

    2011-03-15

    Thin films are fabricated from arrays of silver nanorods with thicknesses of 160 nm and 200 nm, to function as a metamaterial. The negative refractive index and negative permeability are retrieved from measured reflection and transmission coefficients using walk-off interferometer in the visible regime. A negative-index-material thin film with negative permittivity or (and) permeability can be produced by glancing angle deposition.

  3. Long wave-short wave resonance in nonlinear negative refractive index media.

    Science.gov (United States)

    Chowdhury, Aref; Tataronis, John A

    2008-04-18

    We show that long wave-short wave resonance can be achieved in a second-order nonlinear negative refractive index medium when the short wave lies on the negative index branch. With the medium exhibiting a second-order nonlinear susceptibility, a number of nonlinear phenomena such as solitary waves, paired solitons, and periodic wave trains are possible or enhanced through the cascaded second-order effect. Potential applications include the generation of terahertz waves from optical pulses.

  4. Alternatives to the Markovian Model for the Tubulent Refractive Index in Lightwave Propagation

    CERN Document Server

    Pérez, D G; Perez, Dario G.; Zunino, Luciano

    2003-01-01

    We discuss in this letter the markovian model and its limitations when applied to model the turbulent refractive index in lightwave propagation. Not being aware are these limitations usually leads to severe mistakes as we will point out here. It is widely known the index is a passive scalar field; moreover, with our actual knowledge about these quantities we will propose an alternative stochastic process to the markovian model.

  5. Surface Wave Cloak from Graded Refractive Index Nanocomposites

    Science.gov (United States)

    La Spada, L.; McManus, T. M.; Dyke, A.; Haq, S.; Zhang, L.; Cheng, Q.; Hao, Y.

    2016-07-01

    Recently, a great deal of interest has been re-emerged on the possibility to manipulate surface waves, in particular, towards the THz and optical regime. Both concepts of Transformation Optics (TO) and metamaterials have been regarded as one of key enablers for such applications in applied electromagnetics. In this paper, we experimentally demonstrate for the first time a dielectric surface wave cloak from engineered gradient index materials to illustrate the possibility of using nanocomposites to control surface wave propagation through advanced additive manufacturing. The device is designed analytically and validated through numerical simulations and measurements, showing good agreement and performance as an effective surface wave cloak. The underlying design approach has much wider applications, which span from microwave to optics for the control of surface plasmon polaritons (SPPs) and radiation of nanoantennas.

  6. Relationship between the Kramers-Kronig relations and negative index of refraction

    CERN Document Server

    Hickey, Mark C; Kussow, Adil-Gerai

    2010-01-01

    The condition for a negative index of refraction with respect to the vacuum index is established in terms of permittivity and permeability susceptibilities. It is found that the imposition of analyticity to satisfy the Kramers-Kronig relations is a sufficiently general criterion for a physical negative index. The satisfaction of the Kramers-Kronig relations is a manifestation of the principle of causality and the predicted frequency region of negative index agrees with the Depine-Lakhtakia condition for the phase velocity being anti-directed to the Poynting vector, although the conditions presented here do not assume {\\it a priori} a negative solution branch for n.

  7. Monitoring of high refractive index edible oils using coated long period fiber grating sensors

    Science.gov (United States)

    Coelho, Luís.; Viegas, Diana; Santos, José Luís.; de Almeida, Jose Manuel M. M.

    2015-05-01

    Monitoring the quality of high refractive index edible oils is of great importance for the human health. Uncooked edible oils in general are healthy foodstuff, olive oil in particular, however, they are frequently used for baking and cooking. High quality edible oils are made from seeds, nuts or fruits by mechanical processes. Nevertheless, once the mechanical extraction is complete, up to 15% of the oil remains in oil pomace and in the mill wastewater, which can be extracted using organic solvents, often hexane. Optical fiber sensors based on long period fiber gratings (LPFG) have very low wavelength sensitivity when the surround refractive index is higher than the refractive index of the cladding. Titanium dioxide (TiO2) coated LPFG could lead to the realization of high sensitivity chemical sensor for the food industry. In this work LPFG coated with a TiO2 thin film were successfully used for to detect small levels of hexane diluted in edible oils and for real time monitoring the thermal deterioration of edible oils. For a TiO2 coating of 30 nm a wavelength sensitivity of 1361.7 nm/RIU (or 0.97 nm / % V/V) in the 1.4610-1.4670 refractive index range was achieved, corresponding to 0 to 12 % V/V of hexane in olive oil. A sensitivity higher than 638 nm/RIU at 225 ºC was calculated, in the 1.4670-1.4735 refractive index range with a detection limit of thermal deterioration of about 1 minute.

  8. Linear and nonlinear refractive index of As-Se-Ge and Bi doped As-Se-Ge thin films

    Science.gov (United States)

    Sharma, Pankaj; Katyal, S. C.

    2010-06-01

    The present work reports the linear and nonlinear refractive index for (As2Se3)90Ge10 and [(As2Se3)90Ge10]95Bi5 thin films. The formulation proposed by Fournier and Snitzer has been used to predict the nonlinear behavior of refractive index. The linear refractive index and Wemple-DiDomenico parameters were used for the determination of nonlinear refractive index in the wavelength region 0.4 to 1.5 μm. Linear refractive index has been determined using the well known Swanepoel method. This is observed that nonlinear refractive index increases linearly with increasing linear refractive index. With Bi addition this has been found that nonlinear refractive index increases by 2.4 times, while on comparing with pure and doped silica glasses results are 2-3 orders higher. Density and molar volume has also been calculated. The obtained results may lead to yield more sensitive optical limiting devices and these glasses may be used as an optical material for high speed communication fibers.

  9. Direct characterization of ultraviolet-light-induced refractive index structures by scanning near-field optical microscopy

    DEFF Research Database (Denmark)

    Svalgaard, Mikael; Madsen, S.; Hvam, Jørn Märcher;

    1998-01-01

    We have applied a reflection scanning near-field optical microscope to directly probe ultraviolet (UV)-light-induced refractive index structures in planar glass samples. This technique permits direct comparison between topography and refractive index changes (10(-5)-10(-3)) with submicrometer...

  10. Vapor-deposited thin films with negative real refractive index in the visible regime.

    Science.gov (United States)

    Jen, Yi-Jun; Lakhtakia, Akhlesh; Yu, Ching-Wei; Lin, Chin-Te

    2009-05-11

    A thin film comprising parallel tilted nanorods was deposited by directing silver vapor obliquely towards a plane substrate. The reflection and transmission coefficients of the thin film were measured at three wavelengths in the visible regime for normal-illumination conditions, using ellipsometry and walk-off interferometry. The thin film was found to display a negative real refractive index. Since vapor deposition is a well-established industrial technique to deposit thin films, this finding is promising for large-scale production of negatively refracting metamaterials.

  11. Refractive index sensing in an all-solid twin-core photonic bandgap fiber

    DEFF Research Database (Denmark)

    Yuan, Scott Wu; Town, Graham E.; Bang, Ole

    2010-01-01

    We describe a highly sensitive refractive index sensor based on a twin-core coupler in an all-solid photonic bandgap guiding optical fiber. A single hole acts as a microfluidic channel for the analyte, which modifies the coupling between the cores, and avoids the need for selective filling....... By operating in the bandgap guiding regime the proposed sensor is capable of measuring refractive indices around that of water, and because the analyte varies the coupling coefficient (i.e., instead of phase matching condition) the device is capable of both high sensitivity and a relatively large dynamic range....

  12. Refractive Index of Silicon and Germanium and Its Wavelength and Temperature Derivatives.

    Science.gov (United States)

    1979-03-01

    are both transparent in the infrared region of the spectrum and are extremely important op~lcal mater- ials for both lenses and lens coatings used in...of diamond ibrasives and finally with 0.30 4.85 an A1203 polishing powder on a beeswax 0.31 5.21 lap; refractive index determined from 0.32 5.43...3 - coated boat and Ashley, E.J., 1970 1.3 4.31 electron beam gun; deposition rate 10- 1.4 4.34 50 A/sec; refractive indices determined 1.5 4.30 from

  13. Optically transparent bionanofiber composites with low sensitivity to refractive index of the polymer matrix

    Science.gov (United States)

    Nogi, Masaya; Handa, Keishin; Nakagaito, Antonio Norio; Yano, Hiroyuki

    2005-12-01

    Transparent polymers were reinforced by bacterial cellulose (BC) nanofibers, which are 10×50nm ribbon-shaped fibers. They exhibited high luminous transmittance at a fiber content as high as 60 wt %, and low sensitivity to a variety of refractive indices of matrix resins. Due to the nanofiber size effect, high transparency was obtained against a wider distribution of refractive index of resins from 1.492 to 1.636 at 20 °C. The optical transparency was also surprisingly insensitive to temperature increases up to 80 °C. As such, BC nanofibers appear to be viable candidates for optically transparent reinforcement.

  14. Measurement of the refractive index and thickness for infrared optical films deposited on rough substrates.

    Science.gov (United States)

    Saito, M; Nakamura, S; Miyagi, M

    1992-10-01

    A novel method is proposed to evaluate the refractive index and thickness of dielectric thin films in the infrared wavelength range. The method is useful for measurement of thin films that are formed on such rough substrates as metal plates, since it utilizes only the wavelengths of interference peaks, which is slightly affected by surface roughness of the sample. The method was applied to the measurement of germanium, zinc selenide, and lead fluoride films deposited on copper substrates. Measured thicknesses agreed well with the values that were obtained by ellipsometry, and refractive indices exhibited a tendency to increase with the film thickness.

  15. Refractive index sensing of green fluorescent proteins in living cells using fluorescence lifetime imaging microscopy.

    Science.gov (United States)

    van Manen, Henk-Jan; Verkuijlen, Paul; Wittendorp, Paul; Subramaniam, Vinod; van den Berg, Timo K; Roos, Dirk; Otto, Cees

    2008-04-15

    We show that fluorescence lifetime imaging microscopy (FLIM) of green fluorescent protein (GFP) molecules in cells can be used to report on the local refractive index of intracellular GFP. We expressed GFP fusion constructs of Rac2 and gp91(phox), which are both subunits of the phagocyte NADPH oxidase enzyme, in human myeloid PLB-985 cells and showed by high-resolution confocal fluorescence microscopy that GFP-Rac2 and GFP-gp91(phox) are targeted to the cytosol and to membranes, respectively. Frequency-domain FLIM experiments on these PLB-985 cells resulted in average fluorescence lifetimes of 2.70 ns for cytosolic GFP-Rac2 and 2.31 ns for membrane-bound GFP-gp91(phox). By comparing these lifetimes with a calibration curve obtained by measuring GFP lifetimes in PBS/glycerol mixtures of known refractive index, we found that the local refractive indices of cytosolic GFP-Rac2 and membrane-targeted GFP-gp91(phox) are approximately 1.38 and approximately 1.46, respectively, which is in good correspondence with reported values for the cytosol and plasma membrane measured by other techniques. The ability to measure the local refractive index of proteins in living cells by FLIM may be important in revealing intracellular spatial heterogeneities within organelles such as the plasma and phagosomal membrane.

  16. A Multi-D-Shaped Optical Fiber for Refractive Index Sensing

    Directory of Open Access Journals (Sweden)

    Chien-Hsing Chen

    2010-05-01

    Full Text Available A novel class of multi-D-shaped optical fiber suited for refractive index measurements is presented. The multi-D-shaped optical fiber was constructed by forming several D-sections in a multimode optical fiber at localized regions with femtosecond laser pulses. The total number of D-shaped zones fabricated could range from three to seven. Each D-shaped zone covered a sensor volume of 100 μm depth, 250 μm width, and 1 mm length. The mean roughness of the core surface obtained by the AFM images was 231.7 nm, which is relatively smooth. Results of the tensile test indicated that the fibers have sufficient mechanical strength to resist damage from further processing. The multi-D-shaped optical fiber as a high sensitive refractive-index sensor to detect changes in the surrounding refractive index was studied. The results for different concentrations of sucrose solution show that a resolution of 1.27 × 10−3–3.13 × 10−4 RIU is achieved for refractive indices in the range of 1.333 to 1.403, suggesting that the multi-D-shaped fibers are attractive for chemical, biological, and biochemical sensing with aqueous solutions.

  17. Fiber-optic refractive index sensor based on surface plasmon resonance

    Science.gov (United States)

    Hlubina, Petr; Ciprian, Dalibor; Kadulova, Miroslava

    2015-01-01

    A fiber-optic refractive index sensor based on surface plasmon resonance (SPR) in a thin metal film deposited on an unclad core of a multimode fiber is presented. The sensing element of the SPR fiber-optic sensor is a bare core of a step-index optical fiber made of fused silica with a deposited gold film. First, a model of the SPR fiber-optic sensor based on the theory of attenuated total internal reflection is presented. The analysis is carried out in the frame of optics of multilayered media. The sensing scheme uses a wavelength interrogation method and the calculations are performed over a broad spectral range. Second, in a practical realization of the sensor with a double-sided sputtered gold film, a reflection-based sensing scheme to measure the refractive indices of liquids is considered. The refractive index of a liquid is sensed by measuring the position of the dip in the reflected spectral intensity distribution. As an example, the aqueous solutions of ethanol with refractive indices in a range from 1.333 to 1.364 are measured.

  18. Refractometers for different refractive index range by surface plasmon resonance sensors in multimode optical fibers with different metals

    Science.gov (United States)

    Zuppella, P.; Corso, Alain J.; Pelizzo, Maria G.; Cennamo, N.; Zeni, L.

    2016-09-01

    We have realized a plasmonic sensor based on Au/Pd metal bilayer in a multimode plastic optical fiber. This metal bilayer, based on a metal with high imaginary part of the refractive index and gold, shows interesting properties in terms of sensitivity and performances, in different refractive index ranges. The development of highly sensitive platforms for high refractive index detection (higher than 1.38) is interesting for chemical applications based on molecularly imprinted polymer as receptors, while the aqueous medium is the refractive index range of biosensors based on bio-receptors. In this work we have presented an Au/Pd metal bilayer optimized for 1.38-1.42 refractive index range.

  19. Impacts of Refraction Index Mismatch on Performance of Target Detection and Imaging by Using Flat LHM Lens

    Institute of Scientific and Technical Information of China (English)

    FANG Jie-Ran; GONG Yu; DONG Xiao-Ting; WANG Gang

    2008-01-01

    Refraction index mismatch between flat left-handed metamaterial(LHM)lens and its surrounding medium generally destroys the focusing of flat LHM lens and degrades the performance of near-field target detection by usingflat LHM lens.For LHM lens of refraction index mismatch within±30%,numerical simulations demonstrate that lenses with large refraction index may suffer less resolution degradation than lenses with small refraction index,and the enhancement of refocused microwave backscattered from target can be subsided bly up to approximately 5.5 dB.The refraction index mismatch will also shift the target position in the reconstructed image so that theoretical prediction of target position needs to be modified.

  20. Improving axial resolution in confocal microscopy with new high refractive index mounting media.

    Directory of Open Access Journals (Sweden)

    Coralie Fouquet

    Full Text Available Resolution, high signal intensity and elevated signal to noise ratio (SNR are key issues for biologists who aim at studying the localisation of biological structures at the cellular and subcellular levels using confocal microscopy. The resolution required to separate sub-cellular biological structures is often near to the resolving power of the microscope. When optimally used, confocal microscopes may reach resolutions of 180 nm laterally and 500 nm axially, however, axial resolution in depth is often impaired by spherical aberration that may occur due to refractive index mismatches. Spherical aberration results in broadening of the point-spread function (PSF, a decrease in peak signal intensity when imaging in depth and a focal shift that leads to the distortion of the image along the z-axis and thus in a scaling error. In this study, we use the novel mounting medium CFM3 (Citifluor Ltd., UK with a refractive index of 1.518 to minimize the effects of spherical aberration. This mounting medium is compatible with most common fluorochromes and fluorescent proteins. We compare its performance with established mounting media, harbouring refractive indices below 1.500, by estimating lateral and axial resolution with sub-resolution fluorescent beads. We show furthermore that the use of the high refractive index media renders the tissue transparent and improves considerably the axial resolution and imaging depth in immuno-labelled or fluorescent protein labelled fixed mouse brain tissue. We thus propose to use those novel high refractive index mounting media, whenever optimal axial resolution is required.

  1. Optical bound states in the continuum in a single slab with zero refractive index

    Science.gov (United States)

    Li, LiangSheng; Zhang, Jing; Wang, Chong; Zheng, Ning; Yin, Hongcheng

    2017-07-01

    We have investigated theoretically the reflectivity, quality factor, and eigenfrequency for a single slab with zero refractive index. We demonstrate that optical bound states in the continuum can be achieved by the various zero-refractive-index slabs made of epsilon-near-zero, impedance-machted zero-index, or mu-near-zero materials. Moreover, by analytically investigating the frequency of the resonant reflection and resonant transmission, when the quality factor becomes infinity, these two frequencies are precisely equal. For the mu-near-zero slab, the bound states in the continuum are observed at arbitrary incident angles by analyzing the behaviors of complex eigenfrequencies. Our findings may lead to unprecedented high-quality resonators in metamaterials.

  2. Aqueous ammonium thiocyanate solutions as refractive index-matching fluids with low density and viscosity

    Science.gov (United States)

    Morrison, Benjamin C.; Borrero-Echeverry, Daniel

    2015-11-01

    Index-matching fluids play an important role in many fluid dynamics experiments, particularly those involving particle tracking, as they can be used to minimize errors due to distortion from the refraction of light across interfaces of the apparatus. Common index-matching fluids, such as sodium iodide solutions or mineral oils, often have densities or viscosities very different from those of water. This can make them undesirable for use as a working fluid when using commercially available tracer particles or at high Reynolds numbers. A solution of ammonium thiocyanate (NH4SCN) can be used for index-matching common materials such as borosilicate glass and acrylic, and has material properties similar to those of water (ν ~ 1 . 6 cSt and ρ ~ 1 . 1 g/cc). We present an empirical model for predicting the refractive index of aqueous NH4SCN solutions as a function of temperature and NH4SCN concentration that allows experimenters to develop refractive index matching solutions for various common materials. This work was supported by the National Science Foundation (CBET-0853691) and by the James Borders Physics Student Fellowship at Reed College.

  3. Tightly coupled tripole conductor pairs as constituents for a planar 2D-isotropic negative refractive index metamaterial.

    Science.gov (United States)

    Vallecchi, Andrea; Capolino, Filippo

    2009-08-17

    A metamaterial, arranged by stacking layers of planar constituents suitably shaped to be responsive to arbitrarily linearly polarized incident waves is here shown to exhibit 2D-isotropic effective negative refractive index (NRI). The general concept underlying this metamaterial design consists of closely pairing two metallic particles to accomplish, as a result of their tight coupling, both symmetric and antisymmetric resonance modes, whose proper superposition can lead to an effective negative refraction response. The proposed structure is composed by layers of periodically arranged pairs of face coupled loaded tripoles printed on the opposite sides of a single dielectric substrate. Through a comprehensive characterization of the transmission properties of such metamaterial, together with the analysis of its dispersion diagram, conclusive evidence that the medium exhibits effective NRI properties as well as good impedance matching to free space is provided. We also describe some guidelines to design the proposed metamaterial with a prescribed operational frequency bandwidth, dependently on the structure parameters.

  4. Reconstruction of 3D refractive index profiles of PM PANDA optical fiber using digital holographic method

    Science.gov (United States)

    Wahba, H. H.

    2014-10-01

    In this paper, the refractive indices distributions on the two birefringent axes of polarization maintaining (PM) PANDA type optical fiber are reconstructed. The local refraction of the incident rays crossing the PM optical fiber is considered. Off-axis digital holographic interferometric phase shifting arrangement is employed in this investigation. The recorded mutual phase shifted holograms, starts with 0° with steps of π/4, are combined and numerically reconstructed in the image plane to obtain the optical interference phase map. Consequently, the optical phase differences due to the PM optical fiber are extracted after unwrapping and background subtraction of the enhanced optical interference phase map. The birefringence and the beat length in the two directions, fast and slow axes of PM optical fiber, of polarizations in the core region are calculated. This holographic technique and the advanced analysis of the phase shifting permit the calculation of the 3D refractive index distributions for PM PANDA optical fiber.

  5. Methods to retrieve the complex refractive index of aquatic suspended particles: going beyond simple shapes

    Science.gov (United States)

    Sánchez, Albert-Miquel; Piera, Jaume

    2016-07-01

    The scattering properties of aquatic suspended particles have many optical applications. Several data inversion methods have been proposed to estimate important features of particles, such as their size distribution or their refractive index. Most of the proposed methods are based on the Lorenz-Mie theory to solve Maxwell's equations, where particles are considered homogeneous spheres. A generalization that allows consideration of more complex-shaped particles is the T-matrix method. Although this approach imposes some geometrical restrictions (particles must be rotationally symmetrical) it is applicable to many life forms of phytoplankton. In this paper, three different scenarios are considered in order to compare the performance of several inversion methods for retrieving refractive indices. The error associated with each method is discussed and analyzed. The results suggest that inverse methods using the T-matrix approach are useful to accurately retrieve the refractive indices of particles with complex shapes, such as for many phytoplankton organisms.

  6. Contribution of the gradient refractive index and shape to the crystalline lens spherical aberration and astigmatism.

    Science.gov (United States)

    Birkenfeld, Judith; de Castro, Alberto; Ortiz, Sergio; Pascual, Daniel; Marcos, Susana

    2013-06-28

    The optical properties of the crystalline lens are determined by its shape and refractive index distribution. However, to date, those properties have not been measured together in the same lens, and therefore their relative contributions to optical aberrations are not fully understood. The shape, the optical path difference, and the focal length of ten porcine lenses (age around 6 months) were measured in vitro using Optical Coherence Tomography and laser ray tracing. The 3D Gradient Refractive Index distribution (GRIN) was reconstructed by means of an optimization method based on genetic algorithms. The optimization method searched for the parameters of a 4-variable GRIN model that best fits the distorted posterior surface of the lens in 18 different meridians. Spherical aberration and astigmatism of the lenses were estimated using computational ray tracing, with the reconstructed GRIN lens and an equivalent homogeneous refractive index. For all lenses the posterior radius of curvature was systematically steeper than the anterior one, and the conic constant of both the anterior and posterior positive surfaces was positive. In average, the measured focal length increased with increasing pupil diameter, consistent with a crystalline lens negative spherical aberration. The refractive index of nucleus and surface was reconstructed to an average value of 1.427 and 1.364, respectively, for 633 nm. The results of the GRIN reconstruction showed a wide distribution of the index in all lens samples. The GRIN shifted spherical aberration towards negative values when compared to a homogeneous index. A negative spherical aberration with GRIN was found in 8 of the 10 lenses. The presence of GRIN also produced a decrease in the total amount of lens astigmatism in most lenses, while the axis of astigmatism was only little influenced by the presence of GRIN. To our knowledge, this study is the first systematic experimental study of the relative contribution of geometry and GRIN to

  7. Analysis of surface plasmon waves in metaldielectric- metal structures and the criterion for negative refractive index.

    Science.gov (United States)

    Yang, Tian; Crozier, Kenneth B

    2009-01-19

    Surface plasmon waves in metal-dielectric-metal structures have been theoretically examined. Because of the existence of evanescent waves that can have comparable or smaller decay rates than the propagating waves, the sign of dispersion does not necessarily indicate the sign of effective refractive index for these structures. By using the direction of energy decay to distinguish the sign of index, we have obtained different results and insights from previous reports. We also propose an approach to increase the bandwidth and decrease the loss of negative index surface Plasmon propagation in the MDM structure, by simply changing the properties of its dielectric layer.

  8. Visualizations of Light-induced Refractive Index Changes in Photorefractive Crystals Employing Digital Holography

    Institute of Scientific and Technical Information of China (English)

    赵建林; 张鹏; 周俭波; 杨德兴; 杨东升; 李恩普

    2003-01-01

    We propose a novel approach to visualize the light-induced refractive index changes in photorefractive crystals employing digital holography. The holograms formed in a Mach-Zehnder interferometer are recorded by a twodimensional CCD camera. From these holograms, the phase differences, which contain the information of the index changes in photorefractive crystals, are determined by utilizing digital holographic interferometry. Then the two-dimensional visualizations of index changes in the crystals can be obtained. This method is successfully demonstrated in LiNbO3:Fe, KNSBN:Ce and SBN:Cr crystals.

  9. Effect of small variations in the refractive index of the ambient medium on the spectrum of a bent fibre-optic Fabry - Perot interferometer

    Energy Technology Data Exchange (ETDEWEB)

    Kulchin, Yurii N; Vitrik, O B; Gurbatov, S O [Institute for Automation and Control Processes, Far-Eastern Branch, Russian Academy of Sciences, Vladivostok (Russian Federation)

    2011-09-30

    The phase of light propagating through a bent optical fibre is shown to depend on the refractive index of the medium surrounding the fibre cladding when there is resonance coupling between the guided core mode and cladding modes. This shifts the spectral maxima in the bent fibre-optic Fabry - Perot interferometer. The highest phase and spectral sensitivities achieved with this interferometer configuration are 0.71 and 0.077, respectively, and enable changes in the refractive index of the ambient medium down to 5 Multiplication-Sign 10{sup -6} to be detected. This makes the proposed approach potentially attractive for producing highly stable, precision refractive index sensors capable of solving a wide range of liquid refractometry problems.

  10. Determination of the supersaturation in the LiIO 3-HIO 3-H 2O system using a refractive index value at near saturation concentration

    Science.gov (United States)

    Lyutov, Lyudmil G.

    2009-09-01

    The exact determination of supersaturation is essential for the studies of crystal growth processes in solutions. Due to peculiarities in the solubility of LiIO 3, the refractive index of the solution is chosen as a measure of the supersaturation instead of undercooling. The experimental setup is based on a refractometer and a special setup to create supersaturation in the cuvette by means of successive evaporation of small amounts of solvent. The refractive index is measured at different solution concentrations and pH and the data are correlated as dependences of concentration and pH on the refractive index. The accuracy of the method and the adequacy of the model are discussed.

  11. Refractive index and third-order nonlinear susceptibility of C-60 in the condensed phase calculated with the discrete solvent reaction field model

    NARCIS (Netherlands)

    Jensen, L; van Duijnen, PT

    2005-01-01

    We have calculated the frequency-dependent refractive index and the third-order nonlinear susceptibility for C-60 in the condensed phase, which is related to third-harmonic generation (THG) and degenerate four-wave mixing (DFWM) experiments. This was done using the recently developed discrete solven

  12. Determining the refractive index of human hemoglobin solutions by Kramers-Kronig relations with an improved absorption model.

    Science.gov (United States)

    Gienger, Jonas; Groß, Hermann; Neukammer, Jörg; Bär, Markus

    2016-11-01

    The real part of the refractive index of aqueous solutions of human hemoglobin is computed from their absorption spectra in the wavelength range 250-1100 nm using the Kramers-Kronig (KK) relations, and the corresponding uncertainty analysis is provided. The strong ultraviolet (UV) and infrared absorbance of the water outside this spectral range were taken into account in a previous study employing KK relations. We improve these results by including the concentration dependence of the water absorbance as well as by modeling the deep UV absorbance of hemoglobin's peptide backbone. The two free parameters of the model for the deep UV absorbance are fixed by a global fit.

  13. Nanofabrication of planar split ring resonators for negative refractive index metamaterials in the infrared range

    Directory of Open Access Journals (Sweden)

    ZORAN JAKSIC

    2006-06-01

    Full Text Available Experimental nanofabrication of planar structures for one-dimensional metamaterials designed to achieve a negative effective refractive index in the mid-infrared range (5–10 micrometers was performed. Double split ring and complementary double split ring resonators (SRR and CSRR with square and circular geometries, were chosen to be fabricated since these are the basic building blocks to achieve a negative effective dielectric permittivity and magnetic permeability. Scanning probe nanolithography with z-scanner movement was used to fabricate straight-line and curvilinear segments with a line width of 80 – 120 nm. The geometries were delineated in 20 nm thin silver layers sputter-deposited on a positive photoresist substrate spin-coated on polished single crystal silicon wafers, as well as on polycarbonate slabs. The morphology of the structures was characterized by atomic force microscopy. The feature repeatibility was 60 – 150 nm, depending on the process conditions and the feature complexity. The nanolithographic groove depth in different samples ranged from 4 nm to 80 nm.

  14. Electromagnetically induced 2D grating via refractive index enhancement in a far-off resonant system

    Science.gov (United States)

    Chen, Yu-Yuan; Liu, Zhuan-Zhuan; Wan, Ren-Gang

    2017-07-01

    We propose a scheme for electromagnetically induced 2D grating in a mixture of two three-level Λ systems driven by two pairs of far-detuned coherent standing-wave fields. The key idea, which has been used to achieve the refractive index enhancement with vanishing absorption, is to induce two Raman resonances for the probe field, and their strength can be tuned via the two-photon detunings and the intensity of coupling field. By manipulating the absorption and gain properties of these two Raman resonances, absorption-phase grating, phase grating and gain-phase grating which effectively diffract a probe field into high-order directions can be formed in the atoms with the help of standing-wave pattern coherent fields. The diffracting power of the presented gratings strongly depends on the two-photon resonance condition and amplitude of coherent fields, hence the gratings can be used as all-optical multi-channel splitters or all-optical router in optical networking and communication.

  15. Index of refraction, Rayleigh scattering length, and Sellmeier coefficients in solid and liquid argon and xenon

    Science.gov (United States)

    Grace, Emily; Butcher, Alistair; Monroe, Jocelyn; Nikkel, James A.

    2017-09-01

    Large liquid argon detectors have become widely used in low rate experiments, including dark matter and neutrino research. However, the optical properties of liquid argon are not well understood at the large scales relevant for current and near-future detectors. The index of refraction of liquid argon at the scintillation wavelength has not been measured, and current Rayleigh scattering length calculations disagree with measurements. Furthermore, the Rayleigh scattering length and index of refraction of solid argon and solid xenon at their scintillation wavelengths have not been previously measured or calculated. We introduce a new calculation using existing data in liquid and solid argon and xenon to extrapolate the optical properties at the scintillation wavelengths using the Sellmeier dispersion relationship.

  16. Refractive-index-matched hydrogel materials for measuring flow-structure interactions

    Science.gov (United States)

    Byron, Margaret L.; Variano, Evan A.

    2013-02-01

    In imaging-based studies of flow around solid objects, it is useful to have materials that are refractive-index-matched to the surrounding fluid. However, materials currently in use are usually rigid and matched to liquids that are either expensive or highly viscous. This does not allow for measurements at high Reynolds number, nor accurate modeling of flexible structures. This work explores the use of two hydrogels (agarose and polyacrylamide) as refractive-index-matched models in water. These hydrogels are inexpensive, can be cast into desired shapes, and have flexibility that can be tuned to match biological materials. The use of water as the fluid phase allows this method to be implemented immediately in many experimental facilities and permits investigation of high-Reynolds-number phenomena. We explain fabrication methods and present a summary of the physical and optical properties of both gels, and then show measurements demonstrating the use of hydrogel models in quantitative imaging.

  17. Adaptive simultaneous algebraic reconstruction technique for retrieving refractive index profiles of optical fiber

    Science.gov (United States)

    Chang, Zheng; Huang, Sujuan; Wang, Tingyun; Shang, Yi; Zhang, Qianwu; Yan, Cheng; Zou, Fang

    2016-09-01

    An efficient adaptive simultaneous algebraic reconstruction technique (ASART) to calculate optical fiber refractive index profiles is proposed based on phase difference curves obtained by digital holography technique. We develop adaptive relaxation parameter (ARP) on simultaneous algebraic reconstruction technique (SART) to increase the convergence speed and improve the reconstruction accuracy. A formula of ARP is derived mathematically and multilevel scheme (MLS) is used to increase convergence speed in the first iteration. Experimental results show the proposed ASART convergences over 40% faster than SART and achieve significantly higher reconstruction accuracy. Experimental verification shows that ASART is more efficient than SART and filtered back projection in image reconstruction, especially with few projection views. The running time of ASART is much shorter than that of SART, and ASART needs fewer iteration numbers to obtain the same reconstruction effects. In addition, it can be used to measure optical fibers with various diameters that cannot be measured with S14 refractive index profiler (S14).

  18. Refractive-index-matched hydrogel materials for modeling flow-structure interactions

    CERN Document Server

    Byron, Margaret L

    2012-01-01

    In imaging-based studies of flow around solid objects, it is useful to have materials that are refractive-index-matched to the surrounding fluid. However, materials currently in use are usually rigid and matched to liquids that are either expensive or highly viscous. This does not allow for measurements at high Reynolds number, nor accurate modeling of flexible structures. This work explores the use of two hydrogels (agarose and polyacrylamide) as refractive-index-matched models in water. These hydrogels are inexpensive, can be cast into desired shapes, and have flexibility that can be tuned to match biological materials. The use of water as the fluid phase allows this method to be implemented immediately in many experimental facilities and permits investigation of high Reynolds number phenomena. We explain fabrication methods and present a summary of the physical and optical properties of both gels, and then show measurements demonstrating the use of hydrogel models in quantitative imaging.

  19. Refractive index changes in amorphous SiO{sub 2} (silica) by swift ion irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Pena-Rodriguez, O., E-mail: ovidio.pena@uam.es [Centro de Micro-Analisis de Materiales, Universidad Autonoma de Madrid (CMAM-UAM), Cantoblanco, E-28049 Madrid (Spain); Instituto de Optica, Consejo Superior de Investigaciones Cientificas (IO-CSIC), C/ Serrano 121, E-28006 Madrid (Spain); Manzano-Santamaria, J. [Centro de Micro-Analisis de Materiales, Universidad Autonoma de Madrid (CMAM-UAM), Cantoblanco, E-28049 Madrid (Spain); Euratom/CIEMAT Fusion Association, Madrid (Spain); Olivares, J. [Centro de Micro-Analisis de Materiales, Universidad Autonoma de Madrid (CMAM-UAM), Cantoblanco, E-28049 Madrid (Spain); Instituto de Optica, Consejo Superior de Investigaciones Cientificas (IO-CSIC), C/ Serrano 121, E-28006 Madrid (Spain); Rivera, A. [Instituto de Fusion Nuclear, Universidad Politecnica de Madrid, C/ Jose Gutierrez Abascal 2, E-28006 Madrid (Spain); Agullo-Lopez, F. [Centro de Micro-Analisis de Materiales, Universidad Autonoma de Madrid (CMAM-UAM), Cantoblanco, E-28049 Madrid (Spain)

    2012-04-15

    The refractive index changes induced by swift ion-beam irradiation in silica have been measured either by spectroscopic ellipsometry or through the effective indices of the optical modes propagating through the irradiated structure. The optical response has been analyzed by considering an effective homogeneous medium to simulate the nanostructured irradiated system consisting of cylindrical tracks, associated to the ion impacts, embedded into a virgin material. The role of both, irradiation fluence and stopping power, has been investigated. Above a certain electronic stopping power threshold ({approx}2.5 keV/nm), every ion impact creates an axial region around the trajectory with a fixed refractive index (around n = 1.475) corresponding to a certain structural phase that is independent of stopping power. The results have been compared with previous data measured by means of infrared spectroscopy and small-angle X-ray scattering; possible mechanisms and theoretical models are discussed.

  20. Measurement of nonlinear refractive index based on multiple configuration of FBG in generating multi wavelength

    Science.gov (United States)

    Abdullah, Mohd Nizam; Shaari, Sahbudin; Ehsan, Abang Annuar; Menon, Susthitha; Zakaria, Osman

    2015-06-01

    A reliable method for measurement of the nonlinear refractive index through application of multi wavelength phenomenon. Multi wavelength realisation based on Erbium doped fibre laser (EDFL) is proposed and experimentally demonstrated. A combination of 15 m high efficiency Erbium doped fibre (EDF) and a 20 m Photonic Crystal Fibre (PCF) as main catalyst to suppress the homogenous broadening of EDF and to obtain highly stability of multi wavelength through insertion of a set of fibre Bragg gratings (FBGs) in the cavity. This PCF has zero dispersion of 1040 nm which mismatch from transmission window of 1550 nm. A reliable repeatability of multi wavelength based on multiple configuration of FBGs less than 0.2% obtained. This consistent results influence in determination of nonlinear refractive index by relation of four wave mixing (FWM).

  1. Refractive Index Sensor Based on a 1D Photonic Crystal in a Microfluidic Channel

    Directory of Open Access Journals (Sweden)

    Klaus B. Mogensen

    2010-03-01

    Full Text Available A refractive index sensor has been fabricated in silicon oxynitride by standard UV lithography and dry etching processes. The refractive index sensor consists of a 1D photonic crystal (PhC embedded in a microfluidic channel addressed by fiber-terminated planar waveguides. Experimental demonstrations performed with several ethanol solutions ranging from a purity of 96.00% (n = 1.36356 to 95.04% (n = 1.36377 yielded a sensitivity (Δλ/Δn of 836 nm/RIU and a limit of detection (LOD of 6 x 10-5 RIU, which is, however, still one order of magnitude higher than the theoretical lower limit of the limit of detection 1.3 x 10–6 RIU.

  2. Determination of thin film refractive index and thickness by means of film phase thickness

    Science.gov (United States)

    Nenkov, Milen; Pencheva, Tamara

    2008-06-01

    A new approach for determination of refractive index dispersion n(λ) (the real part of the complex refractive index) and thickness d of thin films of negligible absorption and weak dispersion is proposed. The calculation procedure is based on determination of the phase thickness of the film in the spectral region of measured transmittance data. All points of measured spectra are included in the calculations. Barium titanate thin films are investigated in the spectral region 0.38-0.78 μm and their n(λ) and d are calculated. The approach is validated using Swanepoel's method and it is found to be applicable for relatively thin films when measured transmittance spectra have one minimum and one maximum only.

  3. High refractive index Fresnel lens on a fiber fabricated by nanoimprint lithography for immersion applications

    CERN Document Server

    Koshelev, Alexander; Piña-Hernandez, Carlos; Allen, Frances; Dhuey, Scott; Sassolini, Simone; Wong, Edward; Lum, Paul; Munechika, Keiko; Cabrini, Stefano

    2016-01-01

    In this Letter we present a Fresnel lens fabricated on the end of an optical fiber. The lens is fabricated using nanoimprint lithography of a functional high refractive index material, which is suitable for mass production. The main advantage of the presented Fresnel lens compared to a conventional fiber lens is its high refractive index (n=1.69), which enables efficient light focusing even inside other media such as water or adhesive. Measurement of the lens performance in an immersion liquid (n=1.51) shows a near diffraction limited focal spot of 810 nm in diameter at the 1/e2 intensity level for a wavelength of 660 nm. Applications of such fiber lenses include integrated optics, optical trapping and fiber probes.

  4. Refractive index detection of liquid based on magneto-optical surface plasmon resonance

    Science.gov (United States)

    Zhang, Yanfen; Tang, Tingting; Li, Jie; Luo, Li

    2016-09-01

    We propose a refractive index sensor applied in liquid detection based on magneto-optical surface plasmon resonance. The device is made of a prism-coupling system, which consists of a prism and a CeYIG/Au/liquid waveguide. Systematic simulations using the finite element method and 4  ×  4 transfer matrix methods are implemented to calculate the figure of merit (FOM) of sensitivity. Calculation results show that a FOM of 5.022/RIU for refractive index variation from 1.330 to 1.345 can be obtained when the incident wavelength is 980 nm. The proposed structure can achieve high angular sensitivity for the magnetic field of the proposed structure concentrated in the sensing medium. Meanwhile, our sensor, with gold as the bottom layer, is a better hydrophily for the molecular self-assembly technique compared with other conventional sensors, which makes it more practical in applications.

  5. Symmetry relations in the generalized Lorenz-Mie theory for lossless negative refractive index media

    Science.gov (United States)

    André Ambrosio, Leonardo

    2016-09-01

    In this paper we present a theoretical analysis of the generalized Lorenz-Mie theory for negative refractive index (NRI) media and spherical scatterers, extending the well-known concepts and definitions found in the literature involving dielectric or positive refractive index (PRI) particles. The consequences of a negative phase velocity and an anti-parallelism of the wave vector with respect to the Poynting vector are investigated and interpreted in this framework and, together with the symmetries found for the beam-shape coefficients when compared to the conventional PRI case, it is shown that the description of plane waves, Gaussian beams and, more generally, on-axis azimuthally symmetric waves along a NRI medium, their fields and all physical properties can be conveniently correlated with that of dielectric media once the electromagnetic response functions are replaced by their corresponding dielectric counterparts.

  6. Preparation of Hard Coating Films with High Refractive Index from Titania Nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Nam Woo; Ahn, Chi Yong; Song, Ki Chang [Konyang University, 121 Daehak-ro, Nonsan (Korea, Republic of)

    2015-12-15

    The titania (TiO{sub 2}) nanoparticles with a diameter 2-3 nm were synthesized by controlling hydrolysis of titanium tetraisopropoxide (TTIP) in acid solution. Organic-inorganic hybrid coating solutions were prepared by reacting the titania nanoparticles with 3-glycidoxypropyl trimethoxysilane (GPTMS) by the sol-gel method. The hard coating films with high refractive index were obtained by curing thermally at 120 .deg. C after spin-coating the coating solutions on the polycarbonate (PC) sheets. The coating films showed high optical transparency of 90% in the visible range and exhibited a pencil hardness of 2H. Also, the refractive index at 633 nm wavelength of coating films enhanced from 1.502 to 1.584 as the weight content of titania nanoparticles in the coating solutions increased from 4% to 25%.

  7. Directly photoinscribed refractive index change and Bragg gratings in Ohara WMS-15 glass ceramic.

    Science.gov (United States)

    Krug, Peter A; Rogojan, Rodica Matei; Albert, Jacques

    2009-06-20

    We inscribed thick volume gratings in WMS-15 glass ceramic by ultraviolet light at 193 and 248 nm. Unlike earlier work in ceramic materials, the inscription process modified the optical properties of the material without the need for any additional chemical or thermal processing. Experimental evidence from measurements of grating growth, thermal annealing, and spectral absorption indicates that two distinct physical mechanisms are responsible for the grating formation. Weak, easily thermally bleached gratings resulted from exposure fluences below 0.3 kJ/cm2. Optical absorption measurements suggest that these low fluence gratings are predominantly absorption gratings. More thermally stable gratings, found to be refractive index gratings with unsaturated refractive index modulation amplitude as large as 6 x 10(-5) were formed at cumulative fluences of 1 kJ/cm2 and above.

  8. Noncontact Optical Fiber Sensor for Measuring the Refractive Index of Liquids

    Directory of Open Access Journals (Sweden)

    R. Selvas-Aguilar

    2016-01-01

    Full Text Available A noncontact optical fiber sensor for measuring the refractive index of transparent liquids is proposed. It operates by calculating the path of a focused laser beam at 635 nm that travels across the boundaries of a liquid sample. The optical power Fresnel reflections are detected and, subsequently, the refractive index is determined as the ratio between the traveled beam paths when the liquid is deposited versus a reference without the liquid sample. Additionally, a mathematical analysis of the geometrical case is included. The theoretical data from our sensor are in good agreement with the experimental results. The resolution achieved by the sensor is better than 10−3 RIU.

  9. Determining a fluorophore's transition dipole moment from fluorescence lifetime measurements in solvents of varying refractive index.

    Science.gov (United States)

    Chung, Pei-Hua; Tregidgo, Carolyn; Suhling, Klaus

    2016-11-11

    The transition dipole moment of organic dyes PM546 and rhodamine 123 is calculated from fluorescence lifetime measurements in solutions of different refractive index. A model proposed by Toptygin et al (2002 J. Phys. Chem. B 106 3724-34) provides a relationship between the radiative rate constant and refractive index of the solvent, and allows the electronic transition dipole moments to be found: it is (7.1  ±  1.1) D for PM546 which matches that found in the literature, and (8.1  ±  0.1) D for rhodamine 123. Toptygin's model goes further in predicting the shape of the fluorescent dye and here we predict the shape of PM546 and rhodamine 123 to be ellipsoidal.

  10. High refractive index Fresnel lens on a fiber fabricated by nanoimprint lithography for immersion applications.

    Science.gov (United States)

    Koshelev, Alexander; Calafiore, Giuseppe; Piña-Hernandez, Carlos; Allen, Frances I; Dhuey, Scott; Sassolini, Simone; Wong, Edward; Lum, Paul; Munechika, Keiko; Cabrini, Stefano

    2016-08-01

    In this Letter, we present a Fresnel lens fabricated on the end of an optical fiber. The lens is fabricated using nanoimprint lithography of a functional high refractive index material, which is suitable for mass production. The main advantage of the presented Fresnel lens compared to a conventional fiber lens is its high refractive index (n=1.68), which enables efficient light focusing even inside other media, such as water or an adhesive. Measurement of the lens performance in an immersion liquid (n=1.51) shows a near diffraction limited focal spot of 810 nm in diameter at the 1/e2 intensity level for a wavelength of 660 nm. Applications of such fiber lenses include integrated optics, optical trapping, and fiber probes.

  11. Refractometric sensor utilizing a vertically coupled polymeric microdisk resonator incorporating a high refractive index overlay.

    Science.gov (United States)

    Kim, Gun-Duk; Son, Geun-Sik; Lee, Hak-Soon; Kim, Ki-Do; Lee, Sang-Shin

    2009-04-01

    A refractometric sensor resorting to a vertically coupled polymeric microdisk resonator was demonstrated, estimating the refractive index (RI) of an analyte by monitoring the resonant wavelength shift in its transfer characteristics. The disk resonator was especially overlaid with a high RI TiO2 film, thereby reinforcing the interaction of the evanescent field of its guided mode with the analyte. The sensitivity of the sensor was theoretically and experimentally confirmed to be enhanced by adjusting the overlay thickness. The fabricated sensor provided the maximum sensitivity of approximately 294 nm/RIU (refractive index unit) with the 40-nm-thick overlay, which is equivalent to an improvement of 150% compared with the case without the overlay.

  12. Binary and Ternary Mixtures of Biopolymers and Water: Viscosity, Refractive Index, and Density

    Science.gov (United States)

    Silva, Bárbara Louise L. D.; Costa, Bernardo S.; Garcia-Rojas, Edwin E.

    2016-08-01

    Biopolymers have been the focus of intense research because of their wide applicability. The thermophysical properties of solutions containing biopolymers have fundamental importance for engineering calculations, as well as for thermal load calculations, energy expenditure, and development of new products. In this work, the thermophysical properties of binary and ternary solutions of carboxymethylcellulose and/or high methoxylation pectin and water at different temperatures have been investigated taking into consideration different biopolymer concentrations. The experimental data related to the thermophysical properties were correlated to obtain empirical models that can describe the temperature-concentration combined effect on the density, refractive index, and dynamic viscosity. From data obtained from the experiments, the density, refractive index, and dynamic viscosity increase with increasing biopolymer concentration and decrease with increasing temperature. The polynomial models showed a good fit to the experimental data and high correlation coefficients (R2ge 0.98) for each studied system.

  13. Refractive index sensitivity enhancement of optical fiber cladding mode by depositing nanofilm via ALD technology.

    Science.gov (United States)

    Zhao, Ying; Pang, Fufei; Dong, Yanhua; Wen, Jianxiang; Chen, Zhenyi; Wang, Tingyun

    2013-11-04

    The atomic layer deposition (ALD) technology is introduced to enhance the sensitivity of optical fiber cladding mode to surrounding refractive index (SRI) variation. The highly uniform Al2O nanofilm was deposited around the double cladding fiber (DCF) which presents cladding mode resonant feature. With the high refractive index coating, the cladding mode resonant spectrum was tuned. And the sensitivity enhancement for SRI sensor was demonstrated. Through adjusting the deposition cycles, a maximum sensitivity of 723 nm/RIU was demonstrated in the DCF with 2500 deposition cycles at the SRI of 1.34. Based on the analysis of cladding modes reorganization, the cladding modes transition of the coated DCF was investigated theoretically. With the high performance nanofilm coating, the proposed SRI sensor is expected to have wide applications in chemical sensors and biosensors.

  14. Increase in sensitivity of sensor units of environment refraction index change based on superficial plasmon resonance

    Directory of Open Access Journals (Sweden)

    Ushenin Yu. V.

    2011-04-01

    Full Text Available Results of computer modeling of an angular spectrum superficial plasmon resonance in metal films measurements with device PLAZMON-5 with infra-red radiator are analysed. It is shown that use of an infra-red source of radiation allows to improve sensitivity of sensor device in comparison with source of visible light. On an example of dielectric refraction indexes measurement with PLAZMON-5 device experimental check of theoretical calculations has been carried out.

  15. Experimental Study on Near-IR Nonlinear Optical Waveguide Sensor for Refractive Index of Liquids

    Institute of Scientific and Technical Information of China (English)

    ZHANG Jin-rong; WANG Dong; CAO Chang-xiu; ZHUANG Ling

    2007-01-01

    To determine the refractive index of liquids in near infrared(IR),a method is presented by measuring the output angle of the visible Cerenkov-radiation-mode when liquids are placed as the cover on a planar lithium niobate waveguide.The system configuration and the principle of the method are analyzed and some experimental results are given out.Both the experimental result and simulation show that this method is simple,rapid and of sufficient precision.

  16. Analytic evaluation of diffuse flux at a refractive index discontinuity in forward-biased scattering media

    CERN Document Server

    Selden, Adrian C

    2011-01-01

    A simple analytic method of estimating the error involved in using an approximate boundary condition for diffuse radiation in two adjoining scattering media with differing refractive index is presented. The method is based on asymptotic planar fluxes and enables the error to be readily evaluated analytically without recourse to Monte Carlo simulation. The analysis is extended to multi-layer media, for which the cumulative error can exceed 100% when an approximate boundary condition is used.

  17. Reduction of Refractive Index Contrast Threshold for Photonic Band-Gap in Square Lattices

    Institute of Scientific and Technical Information of China (English)

    WANG Jian-Feng; HUANG Yi-Dong; ZHANG Wei; PENG Jiang-De

    2005-01-01

    @@ The threshold of refractive index contrast (RIC) to open a photonic band gap can be reduced by symmetry breaking. For the case of square lattice composed by dielectric cylinders, the absolute band gap is demonstrated by inserting small rods in the centre of the lattices, and the threshold RIC is reduced to 3.8. As for the square lattices composed by air holes in dielectric, the minimal RIC required for an absolute band gap decreases to 2.20.

  18. Refractive index sensor based on an abrupt taper Michelson interferometer in a single-mode fiber.

    Science.gov (United States)

    Tian, Zhaobing; Yam, Scott S-H; Loock, Hans-Peter

    2008-05-15

    A simple refractive index sensor based on a Michelson interferometer in a single-mode fiber is constructed and demonstrated. The sensor consists of a single symmetrically abrupt taper region in a short piece of single-mode fiber that is terminated by approximately 500 nm thick gold coating. The sensitivity of the new sensor is similar to that of a long-period-grating-type sensor, and its ease of fabrication offers a low-cost alternative to current sensing applications.

  19. Counter-Propagating Optical Trapping System for Size and Refractive Index Measurement of Microparticles

    Science.gov (United States)

    2005-06-01

    ifferent from the current best technique for microparticles’ refractive index measurement, refractometry , a bulk technique requiring changing he fluid...sample and monitoring particles via a microscope in refractometry , and of tagging a target with toxic fluorescence dyes in flow cytometry. All these...media, and without a biomarker, it is more friendly to living cell analysis when compared to tradi- tional technologies such as refractometry and flow

  20. Measurement of the nonlinear refractive index of air constituents at mid-infrared wavelengths

    CERN Document Server

    Zahedpour, S; Milchberg, H M

    2015-01-01

    We measure the nonlinear refractive index coefficients in N$_2$, O$_2$ and Ar from visible through mid-infrared wavelengths (\\lambda = 0.4 - 2.4 {\\mu}m). The wavelengths investigated correspond to transparency windows in the atmosphere. Good agreement is found with theoretical models of $\\chi^{(3)}$. Our results are essential for accurately simulating the propagation of ultrashort mid-IR pulses in the atmosphere.