WorldWideScience

Sample records for dentin organic matrix

  1. Insights into the structure and composition of the peritubular dentin organic matrix and the lamina limitans.

    Science.gov (United States)

    Bertassoni, Luiz Eduardo; Stankoska, Katerina; Swain, Michael Vincent

    2012-02-01

    Dentin is a mineralized dental tissue underlying the outer enamel that has a peculiar micro morphology. It is composed of micrometer sized tubules that are surrounded by a highly mineralized structure, called peritubular dentin (PTD), and embedded in a collagen-rich matrix, named intertubular dentin. The PTD has been thought to be composed of a highly mineralized collagen-free organic matrix with unknown composition. Here we tested the hypothesis that proteoglycans and glycosaminoglycans, two important organic structural features found in dentin, are key participants in the microstructure and composition of the PTD. To test this hypothesis dentin blocks were demineralized with 10 vol% citric acid for 2 min and either digested with 1mg/ml TPCK-treated trypsin with 0.2 ammonium bicarbonate at pH 7.9 (TRY) or 0.1 U/mL C-ABC with 50mM Tris, 60mM sodium acetate and 0.02% bovine serum albumin at pH 8.0 (C-ABC). TRY is known to cleave the protein core of dentin proteoglycans, whereas C-ABC is expected to selectively remove glycosaminoglycans. All specimens were digested for 48 h in 37°C, dehydrated in ascending grades of acetone, immersed in HMDS, platinum coated and imaged using an FE-SEM. Images of demineralized dentin revealed a meshwork of noncollagenous fibrils protruding towards the tubule lumen following removal of the peritubular mineral and confirmed the lack of collagen in the peritubular matrix. Further, images revealed that the peritubular organic network originates from a sheet-like membrane covering the entire visible length of tubule, called lamina limitans. Confirming our initial hypothesis, after the digestion with C-ABC the organic network appeared to vanish, while the lamina limitans was preserved. This suggests that glycosaminoglycans are the main component of the PTD organic network. Following digestion with TRY, both the organic network and the lamina limitans disappeared, thus suggesting that the lamina limitans may be primarily composed of

  2. The dentin organic matrix - limitations of restorative dentistry hidden on the nanometer scale

    Energy Technology Data Exchange (ETDEWEB)

    Bertassoni, Luiz E; Orgel, Joseph P.R.; Antipova, Olga; Swain, Michael V [IIT; (Sydney)

    2012-07-25

    The prevention and treatment of dental caries are major challenges occurring in dentistry. The foundations for modern management of this dental disease, estimated to affect 90% of adults in Western countries, rest upon the dependence of ultrafine interactions between synthetic polymeric biomaterials and nanostructured supramolecular assemblies that compose the tooth organic substrate. Research has shown, however, that this interaction imposes less than desirable long-term prospects for current resin-based dental restorations. Here we review progress in the identification of the nanostructural organization of the organic matrix of dentin, the largest component of the tooth structure, and highlight aspects relevant to understating the interaction of restorative biomaterials with the dentin substrate. We offer novel insights into the influence of the hierarchically assembled supramolecular structure of dentin collagen fibrils and their structural dependence on water molecules. Secondly, we review recent evidence for the participation of proteoglycans in composing the dentin organic network. Finally, we discuss the relation of these complexly assembled nanostructures with the protease degradative processes driving the low durability of current resin-based dental restorations. We argue in favour of the structural limitations that these complexly organized and inherently hydrated organic structures may impose on the clinical prospects of current hydrophobic and hydrolyzable dental polymers that establish ultrafine contact with the tooth substrate.

  3. The dentin organic matrix – limitations of restorative dentistry hidden on the nanometer scale

    Science.gov (United States)

    Bertassoni, Luiz E.; Orgel, Joseph P.R.; Antipova, Olga; Swain, Michael V.

    2012-01-01

    The prevention and treatment of dental caries are major challenges occurring in dentistry. The foundations for modern management of this dental disease, estimated to affect 90% of adults in Western countries, rest upon the dependence of ultrafine interactions between synthetic polymeric biomaterials and nanostructured supramolecular assemblies that compose the tooth organic substrate. Research has shown, however, that this interaction imposes less than desirable long-term prospects for current resin-based dental restorations. Here we review progress in the identification of the nanostructural organization of the organic matrix of dentin, the largest component of the tooth structure, and highlight aspects relevant to understating the interaction of restorative biomaterials with the dentin substrate. We offer novel insights into the influence of the hierarchically assembled supramolecular structure of dentin collagen fibrils and their structural dependence on water molecules. Secondly, we review recent evidence for the participation of proteoglycans in composing the dentin organic network. Finally, we discuss the relation of these complexly assembled nanostructures with the protease degradative processes driving the low durability of current resin-based dental restorations. We argue in favour of the structural limitations that these complexly organized and inherently hydrated organic structures may impose on the clinical prospects of current hydrophobic and hydrolyzable dental polymers that establish ultrafine contact with the tooth substrate. PMID:22414619

  4. The Role of Host-derived Dentinal Matrix Metalloproteinases in Reducing Dentin Bonding of Resin Adhesives

    OpenAIRE

    Zhang, Shan-chuan; Kern, Matthias

    2009-01-01

    Dentin matrix metalloproteinases (MMPs) are a family of host-derived proteolytic enzymes trapped within mineralized dentin matrix, which have the ability to hydrolyze the organic matrix of demineralized dentin. After bonding with resins to dentin there are usually some exposed collagen fibrils at the bottom of the hybrid layer owing to imperfect resin impregnation of the demineralized dentin matrix. Exposed collagen fibrils might be affected by MMPs inducing hydrolytic degradation, which migh...

  5. The role of host-derived dentinal matrix metalloproteinases in reducing dentin bonding of resin adhesives.

    Science.gov (United States)

    Zhang, Shan-chuan; Kern, Matthias

    2009-12-01

    Dentin matrix metalloproteinases (MMPs) are a family of host-derived proteolytic enzymes trapped within mineralized dentin matrix, which have the ability to hydrolyze the organic matrix of demineralized dentin. After bonding with resins to dentin there are usually some exposed collagen fibrils at the bottom of the hybrid layer owing to imperfect resin impregnation of the demineralized dentin matrix. Exposed collagen fibrils might be affected by MMPs inducing hydrolytic degradation, which might result in reduced bond strength. Most MMPs are synthesized and released from odontoblasts in the form of proenzymes, requiring activation to degrade extracellular matrix components. Unfortunately, they can be activated by modem self-etch and etch-and-rinse adhesives. The aim of this review is to summarize the current knowledge of the role of dentinal host-derived MMPs in dentin matrix degradation. We also discuss various available MMP inhibitors, especially chlorhexidine, and suggest that they could provide a potential pathway for inhibiting collagen degradation in bonding interfaces thereby increasing dentin bonding durability.

  6. Regulation of reactionary dentin formation by odontoblasts in response to polymicrobial invasion of dentin matrix

    Science.gov (United States)

    Charadram, Nattida; Farahani, Ramin M; Harty, Derek; Rathsam, Catherine; Swain, Michael V; Hunter, Neil

    2011-01-01

    Odontoblast synthesis of dentin proceeds through discrete but overlapping phases characterized by formation of a patterned organic matrix followed by remodelling and active mineralization. Microbial invasion of dentin in caries triggers an adaptive response by odontoblasts, culminating in formation of a structurally altered reactionary dentin, marked by biochemical and architectonic modifications including diminished tubularity. Scanning electron microscopy of the collagen framework in reactionary dentin revealed a radically modified yet highly organized meshwork as indicated by fractal and lacunarity analyses. Immuno-gold labelling demonstrated increased density and regular spatial distribution of dentin sialoprotein (DSP) in reactionary dentin. DSP contributes putative hydroxyapatite nucleation sites on the collagen scaffold. To further dissect the formation of this altered dentin matrix, the associated enzymatic machinery was investigated. Analysis of extracted dentin matrix indicated increased activity of matrix metalloproteinase-2 (MMP-2) in the reactionary zone referenced to physiologic dentin. Likewise, gene expression analysis of micro-dissected odontoblast layer revealed up-regulation of MMP-2. Parallel up-regulation of tissue inhibitor of metalloproteinase-2 (TIMP-2) and membrane type 1- matrix metalloproteinase (MT1-MMP) was observed in response to caries. Next, modulation of odontoblastic dentinogenic enzyme repertoire was addressed. In the odontoblast layer expression of Toll-like receptors was markedly altered in response to bacterial invasion. In carious teeth TLR-2 and the gene encoding the corresponding adaptor protein MyD88 were down-regulated whereas genes encoding TLR-4 and adaptor proteins TRAM and Mal/TIRAP were up-regulated. TLR-4 signalling mediated by binding of bacterial products has been linked to up-regulation of MMP-2. Further, increased expression of genes encoding components of the TGF-β signalling pathway, namely SMAD-2 and SMAD-4

  7. The dentin organic matrix – limitations of restorative dentistry hidden on the nanometer scale

    OpenAIRE

    2012-01-01

    The prevention and treatment of dental caries are major challenges occurring in dentistry. The foundations for modern management of this dental disease, estimated to affect 90% of adults in Western countries, rest upon the dependence of ultrafine interactions between synthetic polymeric biomaterials and nanostructured supramolecular assemblies that compose the tooth organic substrate. Research has shown, however, that this interaction imposes less than desirable long-term prospects for curren...

  8. Resin diffusion through demineralized dentin matrix

    Directory of Open Access Journals (Sweden)

    CARVALHO Ricardo M.

    1999-01-01

    Full Text Available This paper has focused on the factors that may affect the permeability of adhesive resins into the demineralized dentin matrix during the development of the bonding process. The effects of surface moisture are discussed respectively to the adhesive systems, and the problems related to incomplete hybrid layer formation presented.

  9. Type VII Collagen is Enriched in the Enamel Organic Matrix Associated with the Dentin-Enamel Junction of Mature Human Teeth

    Science.gov (United States)

    McGuire, Jacob D.; Walker, Mary P.; Mousa, Ahmad; Wang, Yong; Gorski, Jeff P.

    2014-01-01

    The inner enamel region of erupted teeth is known to exhibit higher fracture toughness and crack growth resistance than bulk phase enamel. However, an explanation for this behavior has been hampered by the lack of compositional information for the residual enamel organic matrix. Since enamel-forming ameloblasts are known to express type VII collagen and type VII collagen null mice display abnormal amelogenesis, the aim of this study was to determine whether type VII collagen is a component of the enamel organic matrix at the dentin-enamel junction (DEJ) of mature human teeth. Immunofluorescent confocal microscopy of demineralized tooth sections localized type VII collagen to the organic matrix surrounding individual enamel rods near the DEJ. Morphologically, immunoreactive type VII collagen helical-bundles resembled the gnarled-pattern of enamel rods detected by Coomassie Blue staining. Western blotting of whole crown or enamel matrix extracts also identified characteristic Mr=280 and 230 kDa type VII dimeric forms, which resolved into 75 and 25 kDa bands upon reduction. As expected, the collagenous domain of type VII collagen was resistant to pepsin digestion, but was susceptible to purified bacterial collagenase. These results demonstrate the inner enamel organic matrix in mature teeth contains macromolecular type VII collagen. Based on its physical association with the DEJ and its well-appreciated capacity to complex with other collagens, we hypothesize that enamel embedded type VII collagen fibrils may contribute not only to the structural resilience of enamel, but may also play a role in bonding enamel to dentin. PMID:24594343

  10. Evaluation of inactivation of intracanal antiseptics by dentin, demineralized dentin, dentin matrix and mineral component of dentin

    Directory of Open Access Journals (Sweden)

    Razmi H

    2007-01-01

    Full Text Available Background and Aim: Many studies have shown that microorganisms are the main cause of pulpal diseases and the main purpose of root canal therapy is their elimination from the root canal system. Antiseptic agents are used to reduce bacteria but their antibacterial activities differ from in vivo to in vitro studies and might be inactivated by dentin and its components in root canal space. This study was designed to investigate the effect of dentin on antibacterial activity of different antimicrobial agents. Materials and Methods: In this experimental study, two antibacterial agents (sodium hypochlorite and chlorhexidine with different concentrations were used in four experimental groups: Group 1: dentin, Group 2: demineralized dentin with EDTA, Group 3: dentin matrix and Group 4: dentin mineral component. The species used in this study was Entrococcus faecalis. Different concentration of agents were added to mixture of each experimental group and bacteria. At the baseline and after one and 24 hours, samples were collected and cultured. After incubation period, colonies were counted. Data were analyzed by Tukey test with p<0.05 as the limit of significance. Results: 2% and 0.2% chlorhexidine, and 5% sodium hypochlorite solutions at the three studied times eliminated Entrococcus faecalis completely. 1% sodium hypochlorite eliminated all bacteria in 1h and 24 hs. Statistical analysis showed significant differences between experimental and control groups (P<0.05. Sodium 1% hypochlorite at time 0, could reduce bacteria significantly (P<0.05 but didn’t eliminate them completely. Conclusion: Inactivation of intracanal antiseptics was not observed in this study. As elimination of bacteria occurred, application of these antibacterial agents are recommended in endodontic treatment. Further investigations on other antibacterial agents, other concentrations and shorter time intervals are recommended.

  11. Effects of matrix metallproteinases on dentin bonding and strategies to increase durability of dentin adhesion

    Directory of Open Access Journals (Sweden)

    Jung-Hyun Lee

    2012-02-01

    Full Text Available The limited durability of resin-dentin bonds severely compromises the longevity of composite resin restorations. Resin-dentin bond degradation might occur via degradation of water-rich and resin sparse collagen matrices by host-derived matrix metalloproteinases (MMPs. This review article provides overview of current knowledge of the role of MMPs in dentin matrix degradation and four experimental strategies for extending the longevity of resin-dentin bonds. They include: (1 the use of broad-spectrum inhibitors of MMPs, (2 the use of cross-linking agents for silencing the activities of MMPs, (3 ethanol wet-bonding with hydrophobic resin, (4 biomimetic remineralization of water-filled collagen matrix. A combination of these strategies will be able to overcome the limitations in resin-dentin adhesion.

  12. Extracellular matrix proteins and the dynamics of dentin formation.

    Science.gov (United States)

    Butler, William T; Brunn, Jan C; Qin, Chunlin; McKee, Marc D

    2002-01-01

    Dentinogenesis involves controlled reactions that result in conversion of unmineralized predentin to dentin when apatite crystals are formed. This process is dynamic: Maturation events occur within predentin beginning at the proximal layer and progressing to the predentin-dentin (PD) border. One type of controlled reaction is the proteolytic processing of dentin sialophosphoprotein (DSPP) to dentin sialoprotein (DSP) and dentin phosphoprotein (DPP), by cleavage of at least three highly conserved peptide bonds. We postulate that this processing event represents an activation step, resulting in release of DPP, which is active in its effects on formation and growth of apatite crystals. Dentin matrix protein 1 (DPM1), present as a processed fragment (57-kD protein) in bone, is seen in dentin on sodium dodecyl sulfate polyacrylamide gel electrophoresis as one intact protein of 150-200 kD. Anti-57-kD antibodies elicit immunoreactivity in bone, dentin, and cellular cementum. In bone, the reactivity is associated with osteocytes and their cell processes. Similarly, dentin shows reactivity in odontoblasts, predentin, and the odontoblast processes. In summary, the processing of large sialic acid-rich proteins into smaller fragments may be an important part of the controlled conversion of predentin to dentin and osteoid to bone.

  13. Dentin matrix degradation by host Matrix Metalloproteinases: inhibition and clinical perspectives towards regeneration.

    Directory of Open Access Journals (Sweden)

    Catherine eChaussain

    2013-11-01

    Full Text Available Bacterial enzymes have long been considered solely accountable for the degradation of the dentin matrix during the carious process. However, the emerging literature suggests that host-derived enzymes, and in particular the matrix metalloproteinases (MMPs contained in dentin and saliva can play a major role in this process by their ability to degrade the dentin matrix from within. These findings are important since they open new therapeutic options for caries prevention and treatment. The possibility of using MMP inhibitors to interfere with dentin caries progression is discussed. Furthermore, the potential release of bioactive peptides by the enzymatic cleavage of dentin matrix proteins by MMPs during the carious process is discussed. These peptides, once identified, may constitute promising therapeutical tools for tooth and bone regeneration.

  14. Immunocytochemical detection of dentin matrix proteins in primary teeth from patients with dentinogenesis imperfecta associated with osteogenesis imperfecta.

    Science.gov (United States)

    Orsini, G; Majorana, A; Mazzoni, A; Putignano, A; Falconi, M; Polimeni, A; Breschi, L

    2014-12-01

    Dentinogenesis imperfecta determines structural alterations of the collagen structure still not completely elucidated. Immunohistochemical analysis was used to assay Type I and VI collagen, various non-collagenous proteins distribution in human primary teeth from healthy patients or from patients affected by type I dentinogenesis imperfecta (DGI-I) associated with osteogenesis imperfecta (OI). In sound primary teeth, an organized well-known ordered pattern of the type I collagen fibrils was found, whereas atypical and disorganized fibrillar structures were observed in dentin of DGI-I affected patients. Expression of type I collagen was observed in both normal and affected primary teeth, although normal dentin stained more uniformly than DGI-I affected dentin. Reactivity of type VI collagen was significantly lower in normal teeth than in dentin from DGI-I affected patients (P<0.05). Expressions of dentin matrix protein (DMP)-1 and osteopontin (OPN) were observed in both normal dentin and dentin from DGI-I affected patients, without significant differences, being DMP1 generally more abundantly expressed. Immunolabeling for chondroitin sulfate (CS) and biglycan (BGN) was weaker in dentin from DGI-I-affected patients compared to normal dentin, this decrease being significant only for CS. This study shows ultrastructural alterations in dentin obtained from patients affected by DGI-I, supported by immunocytochemical assays of different collagenous and non-collagenous proteins.

  15. Immunocytochemical detection of dentin matrix proteins in primary teeth from patients with dentinogenesis imperfecta associated with osteogenesis imperfecta

    Directory of Open Access Journals (Sweden)

    G. Orsini

    2014-10-01

    Full Text Available Dentinogenesis imperfecta determines structural alterations of the collagen structure still not completely elucidated. Immunohistochemical analysis was used to assay Type I and VI collagen, various non-collagenous proteins distribution in human primary teeth from healthy patients or from patients affected by type I dentinogenesis imperfecta (DGI-I associated with osteogenesis imperfecta (OI. In sound primary teeth, an organized well-known ordered pattern of the type I collagen fibrils was found, whereas atypical and disorganized fibrillar structures were observed in dentin of DGI-I affected patients. Expression of type I collagen was observed in both normal and affected primary teeth, although normal dentin stained more uniformly than DGI-I affected dentin. Reactivity of type VI collagen was significantly lower in normal teeth than in dentin from DGI-I affected patients (P<0.05. Expressions of dentin matrix protein (DMP-1 and osteopontin (OPN were observed in both normal dentin and dentin from DGI-I affected patients, without significant differences, being DMP1 generally more abundantly expressed. Immunolabeling for chondroitin sulfate (CS and biglycan (BGN was weaker in dentin from DGI-I-affected patients compared to normal dentin, this decrease being significant only for CS. This study shows ultrastructural alterations in dentin obtained from patients affected by DGI-I, supported by immunocytochemical assays of different collagenous and non-collagenous proteins.

  16. Immunocytochemical Detection of Dentin Matrix Proteins in Primary Teeth from Patients with Dentinogenesis Imperfecta Associated with Osteogenesis Imperfecta

    Science.gov (United States)

    Orsini, G.; Majorana, A.; Mazzoni, A.; Putignano, A.; Falconi, M.; Polimeni, A.; Breschi, L.

    2014-01-01

    Dentinogenesis imperfecta determines structural alterations of the collagen structure still not completely elucidated. Immunohisto-chemical analysis was used to assay type I and VI collagen, various non-collagenous proteins distribution in human primary teeth from healthy patients or from patients affected by type I dentinogenesis imperfecta (DGI-I) associated with osteogenesis imperfecta (OI). In sound primary teeth, an organized well-known ordered pattern of the type I collagen fibrils was found, whereas atypical and disorganized fibrillar structures were observed in dentin of DGI-I affected patients. Expression of type I collagen was observed in both normal and affected primary teeth, although normal dentin stained more uniformly than DGI-I affected dentin. Reactivity of type VI collagen was significantly lower in normal teeth than in dentin from DGI-I affected patients (P<0.05). Expressions of dentin matrix protein-1 (DMP1) and osteopontin (OPN) were observed in both normal dentin and dentin from DGI-I affected patients, without significant differences, being DMP1 generally more abundantly expressed. Immuno labeling for chondroitin sulfate (CS) and biglycan (BGN) was weaker in dentin from DGI-I-affected patients compared to normal dentin, this decrease being significant only for CS. This study shows ultra-structural alterations in dentin obtained from patients affected by DGI-I, supported by immunocytochemical assays of different collagenous and non-collagenous proteins. PMID:25578972

  17. Cryopreserved dentin matrix as a scaffold material for dentin-pulp tissue regeneration.

    Science.gov (United States)

    Jiao, Liang; Xie, Li; Yang, Bo; Yu, Mei; Jiang, Zongting; Feng, Lian; Guo, Weihua; Tian, Weidong

    2014-06-01

    Cryopreservation has been identified as an efficient approach to preserve tissue engineered products for a long term. Our prior studies have suggested that the treated dentin matrix (TDM) could be an ideal bioactive scaffold for dental tissue regeneration. In this study, we hypothesize that the cryopreservation could effectively maintain the survival and viability of dentinogenesis-related proteins of TDM and the cryopreserved dentin matrix (CDM) would provide the suitable biological scaffold and inductive microenvironment for the regeneration of dentin-pulp like tissue. CDM-3 and CDM-6 were prepared by cryopreserving TDM in liquid nitrogen (-196 °C) with cryoprotectant for 3 months and 6 months, respectively. Various biological characteristics of CDM, including mechanical properties, cell proliferation, and odontogenesis ability, were investigated. To further evaluate the inductive capacity of CDM, human dental follicle cells were encapsulated within CDM, and implanted the scaffold into a mouse model for 8 weeks, and the grafts were harvested and assessed histologically. The CDM showed superior mechanical properties than TDM. Compared to TDM, CDM can release more dentinogenesis-related proteins due to the larger pore diameter. Cell proliferation with the addition of CDM extract liquid was similar to that of TDM in the first five days. Human dental follicle cells, under the effect of CDM extract liquid, highly expressed bone sialoprotein, collagen-1, alkaline phosphatase, indicating that CDM, regarded as the inductive microenvironment, plays an important role in odontogenesis. Most importantly, in vivo, CDM could induce dental follicle cells to regenerate new dentin-pulp like tissues, such as dentinal tubules, predentin, collagen fibers, nerves, and blood vessels which were positive for dentin sialophosphoprotein, dental matrix protein-1, Tubulin, and collagen-1. In conclusion, CDM is an ideal biological scaffold material for human dentin-pulp like tissue

  18. The NH2-terminal and COOH-terminal fragments of dentin matrix protein 1 (DMP1) localize differently in the compartments of dentin and growth plate of bone.

    Science.gov (United States)

    Maciejewska, Izabela; Cowan, Cameron; Svoboda, Kathy; Butler, William T; D'Souza, Rena; Qin, Chunlin

    2009-02-01

    Multiple studies have shown that dentin matrix protein 1 (DMP1) is essential for bone and dentin mineralization. After post-translational proteolytic cleavage, DMP1 exists within the extracellular matrix of bone and dentin as an NH2-terminal fragment, a COOH-terminal fragment, and the proteoglycan form of the NH2-terminal fragment (DMP1-PG). To begin to assess the biological function of each fragment, we evaluated the distribution of both fragments in the rat tooth and bone using antibodies specific to the NH2-terminal and COOH-terminal regions of DMP1 and confocal microscopy. In rat first molar organs, the NH2-terminal fragment localized to predentin, whereas the COOH-terminal fragment was mainly restricted to mineralized dentin. In the growth plate of bone, the NH2-terminal fragment appeared in the proliferation and hypertrophic zones, whereas the COOH-terminal fragment occupied the ossification zone. Forster resonance energy transfer analysis showed colocalization of both fragments of DMP1 in odontoblasts and predentin, as well as hypertrophic chondrocytes within the growth plates of bone. The biochemical analysis of bovine teeth showed that predentin is rich in DMP1-PG, whereas mineralized dentin primarily contains the COOH-terminal fragment. We conclude that the differential patterns of expression of NH2-terminal and COOH-terminal fragments of DMP1 reflect their potentially distinct roles in the biomineralization of dentin and bone matrices.

  19. Dentin matrix protein 1 and dentin sialophosphoprotein in human sound and carious teeth: an immunohistochemical and colorimetric assay

    Directory of Open Access Journals (Sweden)

    D. Martini

    2013-10-01

    Full Text Available Dentin matrix protein 1 (DMP1 and dentin sialophosphoprotein (DSPP are extracellular matrix proteins produced by odontoblasts involved in the dentin mineralization. The aim this study was to compare the distribution of DMP1 and DSPP in human sound dentin vs human sclerotic dentin. Sixteen sound and sixteen carious human molars were selected, fixed in paraformaldehyde and processed for immunohistochemical detection of DMP1 and DSPP by means of light microscopy, transmission electron microscopy (TEM and high-resolution field emission in-lens scanning electron microscopy (FEI-SEM. Specimens were submitted to a pre-embedding or a post-embedding immunolabeling technique using primary antibodies anti DMP1 and anti-DSPP and gold-conjugated secondary antibodies. Other samples were processed for the detection of DMP1 and DSPP levels. Dentin from these samples was mechanically fractured to powder, then a protein extraction and a protein level detection assay were performed. DMP1 and DSPP were more abundant in carious than in sound samples. Immunohistochemical analyses in sclerotic dentin disclosed a high expression of DMP1 and DSPP inside the tubules, suggesting an active biomineralization of dentin by odontoblasts. Furthermore, the detection of small amounts of these proteins inside the tubules far from the carious lesion, as shown in the present study, is consistent with the hypothesis of a preventive defense of all dentin after a noxious stimulus has undermined the tooth.

  20. Dentin matrix protein 1 and dentin sialophosphoprotein in human sound and carious teeth: an immunohistochemical and colorimetric assay.

    Science.gov (United States)

    Martini, D; Trirè, A; Breschi, L; Mazzoni, A; Teti, G; Falconi, M; Ruggeri, A

    2013-10-29

    Dentin matrix protein 1 (DMP1) and dentin sialophosphoprotein (DSPP) are extracellular matrix proteins produced by odontoblasts involved in the dentin mineralization. The aim this study was to compare the distribution of DMP1 and DSPP in human sound dentin vs human sclerotic dentin. Sixteen sound and sixteen carious human molars were selected, fixed in paraformaldehyde and processed for immunohistochemical detection of DMP1 and DSPP by means of light microscopy, transmission electron microscopy (TEM) and high-resolution field emission in-lens scanning electron microscopy (FEI-SEM). Specimens were submitted to a pre-embedding or a post-embedding immunolabeling technique using primary antibodies anti DMP1 and anti-DSPP and gold-conjugated secondary antibodies. Other samples were processed for the detection of DMP1 and DSPP levels. Dentin from these samples was mechanically fractured to powder, then a protein extraction and a protein level detection assay were performed. DMP1 and DSPP were more abundant in carious than in sound samples. Immunohistochemical analyses in sclerotic dentin disclosed a high expression of DMP1 and DSPP inside the tubules, suggesting an active biomineralization of dentin by odontoblasts. Furthermore, the detection of small amounts of these proteins inside the tubules far from the carious lesion, as shown in the present study, is consistent with the hypothesis of a preventive defense of all dentin after a noxious stimulus has undermined the tooth.

  1. Dentin Matrix Protein 1 and Dentin Sialophosphoprotein in Human Sound and Carious Teeth: An Immunohistochemical and Colorimetric Assay

    Science.gov (United States)

    Martini, D.; Trirè, A.; Breschi, L.; Mazzoni, A.; Orsini, G.; Teti, G.; Falconi, M.; Ruggeri, A.

    2013-01-01

    Dentin matrix protein 1 (DMP1) and dentin sialophosphoprotein (DSPP) are extracellular matrix proteins produced by odontoblasts involved in the dentin mineralization. The aim this study was to compare the distribution of DMP1 and DSPP in human sound dentin vs human sclerotic dentin. Sixteen sound and sixteen carious human molars were selected, fixed in paraformaldehyde and processed for immunohistochemical detection of DMP1 and DSPP by means of light microscopy, transmission electron microscopy (TEM) and high-resolution field emission in-lens scanning electron microscopy (FEI-SEM). Specimens were submitted to a pre-embedding or a post-embedding immunolabeling technique using primary antibodies anti DMP1 and anti-DSPP and gold-conjugated secondary antibodies. Other samples were processed for the detection of DMP1 and DSPP levels. Dentin from these samples was mechanically fractured to powder, then a protein extraction and a protein level detection assay were performed. DMP1 and DSPP were more abundant in carious than in sound samples. Immunohistochemical analyses in sclerotic dentin disclosed a high expression of DMP1 and DSPP inside the tubules, suggesting an active biomineralization of dentin by odontoblasts. Furthermore, the detection of small amounts of these proteins inside the tubules far from the carious lesion, as shown in the present study, is consistent with the hypothesis of a preventive defense of all dentin after a noxious stimulus has undermined the tooth. PMID:24441185

  2. Matrix metalloproteinase 20-dentin sialophosphoprotein interaction in oral cancer.

    Science.gov (United States)

    Saxena, G; Koli, K; de la Garza, J; Ogbureke, K U E

    2015-04-01

    Matrix metalloproteinase 20 (MMP-20), widely regarded as tooth specific, participates with MMP-2 in processing dentin sialophosphoprotein (DSPP) into dentin sialoprotein, dentin phosphoprotein, and dentin glycoprotein. In biochemical system, MMP-2, MMP-3, and MMP-9 bind with high affinity to, and are activated by, specific small integrin-binding ligand N-linked glycoproteins (SIBLINGs): bone sialoprotein, osteopontin, and dentin matrix protein 1, respectively. Subsequent reports documented possible biological relevance of SIBLING-MMP interaction in vivo by showing that SIBLINGs are always coexpressed with their MMP partners. However, the cognate MMPs for 2 other SIBLINGs-DSPP and matrix extracellular phosphogylcoprotein-are yet to be identified. Our goal was to investigate MMP-20 expression and to explore preliminary evidence of its interaction with DSPP in oral squamous cell carcinomas (OSCCs). Immunohistochemistry analysis of sections from 21 cases of archived human OSCC tissues showed immunoreactivity for MMP-20 in 18 (86%) and coexpression with DSPP in all 15 cases (71%) positive for DSPP. Similarly, 28 (93%) of 30 cases of oral epithelial dysplasia were positive for MMP-20. Western blot and quantitative real-time polymerase chain reaction analysis on OSCC cell lines showed upregulation of MMP-20 protein and mRNA, respectively, while immunofluorescence showed coexpression of MMP-20 and DSPP. Colocalization and potential interaction of MMP-20 with dentin sialoprotein was confirmed by coimmunoprecipitation and mass spectrometry analysis of immunoprecipitation product from OSCC cell lysate, and in situ proximity ligation assays. Significantly, results of chromatin immunoprecipation revealed a 9-fold enrichment of DSPP at MMP-20 promoter-proximal elements. Our data provide evidence that MMP-20 has a wider tissue distribution than previously acknowledged. MMP-20-DSPP specific interaction, excluding other MMP-20-SIBLING pairings, identifies MMP-20 as DSPP cognate MMP

  3. Anti-proteolytic capacity and bonding durability of proanthocyanidin-biomodified demineralized dentin matrix

    Institute of Scientific and Technical Information of China (English)

    Rui-Rui Liu; Ming Fang; Ling Zhang; Cheng-Fang Tang; Qi Dou; Ji-Hua Chen

    2014-01-01

    Our previous studies showed that biomodification of demineralized dentin collagen with proanthocyanidin (PA) for a clinically practical duration improves the mechanical properties of the dentin matrix and the immediate resin-dentin bond strength. The present study sought to evaluate the ability of PA biomodification to reduce collagenase-induced biodegradation of demineralized dentin matrix and dentin/adhesive interfaces in a clinically relevant manner. The effects of collagenolytic and gelatinolytic activity on PA-biomodified demineralized dentin matrix were analysed by hydroxyproline assay and gelatin zymography. Then, resin-/dentin-bonded specimens were prepared and challenged with bacterial collagenases. Dentin treated with 2%chlorhexidine and untreated dentin were used as a positive and negative control, respectively. Collagen biodegradation, the microtensile bond strengths of bonded specimens and the micromorphologies of the fractured interfaces were assessed. The results revealed that both collagenolytic and gelatinolytic activity on demineralized dentin were notably inhibited in the PA-biomodified groups, irrespective of PA concentration and biomodification duration. When challenged with exogenous collagenases, PA-biomodified bonded specimens exhibited significantly less biodegradation and maintained higher bond strengths than the untreated control. These results suggest that PA biomodification was effective at inhibiting proteolytic activity on demineralized dentin matrix and at stabilizing the adhesive/dentin interface against enzymatic degradation, is a new concept that has the potential to improve bonding durability.

  4. Decalcificated human dentin matrix in autogenous repair of skull defects

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    @@In the management of traumatic skull defect, the classical treatment has usually been adopted, i.e.,primary debridement and secondary repair of bone defect, especially in cases of open lacerated skull fracture. 1 In general, the use of prosthetic material in repair is often not so satisfactory either in China or abroad. Decalcificated human dentin matrix (DHDM)has been used in autogenous repair of traumatic skull defect in primary operation and a good curative effect has been gained since the time from September 1996 to March 1998. Clinical results and CT scanning observation are reported in the following.

  5. Glycosylation of Dentin Matrix Protein 1 is critical for osteogenesis.

    Science.gov (United States)

    Sun, Yao; Weng, Yuteng; Zhang, Chenyang; Liu, Yi; Kang, Chen; Liu, Zhongshuang; Jing, Bo; Zhang, Qi; Wang, Zuolin

    2015-12-04

    Proteoglycans play important roles in regulating osteogenesis. Dentin matrix protein 1 (DMP1) is a highly expressed bone extracellular matrix protein that regulates both bone development and phosphate metabolism. After glycosylation, an N-terminal fragment of DMP1 protein was identified as a new proteoglycan (DMP1-PG) in bone matrix. In vitro investigations showed that Ser(89) is the key glycosylation site in mouse DMP1. However, the specific role of DMP1 glycosylation is still not understood. In this study, a mutant DMP1 mouse model was developed in which the glycosylation site S(89) was substituted with G(89) (S89G-DMP1). The glycosylation level of DMP1 was down-regulated in the bone matrix of S89G-DMP1 mice. Compared with wild type mice, the long bones of S89G-DMP1 mice showed developmental changes, including the speed of bone remodeling and mineralization, the morphology and activities of osteocytes, and activities of both osteoblasts and osteoclasts. These findings indicate that glycosylation of DMP1 is a key posttranslational modification process during development and that DMP1-PG functions as an indispensable proteoglycan in osteogenesis.

  6. Inhibition of matrix metalloproteinase activity in human dentin via novel antibacterial monomer

    Science.gov (United States)

    Li, Fang; Majd, Hessam; Weir, Michael D.; Arola, Dwayne D.; Xu, Hockin H.K.

    2015-01-01

    Objectives Dentin-composite bond failure is caused by factors including hybrid layer degradation, which in turn can be caused by hydrolysis and enzymatic degradation of the exposed collagen in the dentin. The objectives of this study were to investigate a new antibacterial monomer (dimethylaminododecyl methacrylate, DMADDM) as an inhibitor for matrix metalloproteinases (MMPs), and to determine the effects of DMADDM on both soluble recombinant human MMPs (rhMMPs) and dentin matrix-bound endogenous MMPs. Methods Inhibitory effects of DMADDM at six mass% (0.1% to 10%) on soluble rhMMP-8 and rhMMP-9 were measured using a colorimetic assay. Matrix-bound endogenous MMP activity was evaluated in demineralized human dentin. Dentin beams were divided into four groups (n = 10) and incubated in calcium- and zinc-containing media (control medium); or control medium + 0.2% chlorhexidine (CHX); 5% 12-methacryloyloxydodecylpyridinium bromide (MDPB); or 5% DMADDM. Dissolution of dentin collagen peptides was evaluated by mechanical testing in three-point flexure, loss of dentin mass, and a hydroxyproline assay. Results Use of 0.1% to 10% DMADDM exhibited a strong concentration-dependent anti-MMP effect, reaching 90% of inhibition on rhMMP-8 and rhMMP-9 at 5% DMADDM concentration. Dentin beams in medium with 5% DMADDM showed 34% decrease in elastic modulus (vs. 73% decrease for control), 3% loss of dry dentin mass (vs. 28% loss for control), and significantly less solubilized hydroxyproline when compared with control (p dentin MMPs. These results, together with previous studies showing that adhesives containing DMADDM inhibited biofilms without compromising dentin bond strength, suggest that DMADDM is promising for use in adhesives to prevent collagen degradation in hybrid layer and protect the resin-dentin bond. PMID:25595564

  7. The Matrix Organization Revisited

    DEFF Research Database (Denmark)

    Gattiker, Urs E.; Ulhøi, John Parm

    1999-01-01

    This paper gives a short overview of matrix structure and technology management. It outlines some of the characteristics and also points out that many organizations may actualy be hybrids (i.e. mix several ways of organizing to allocate resorces effectively).......This paper gives a short overview of matrix structure and technology management. It outlines some of the characteristics and also points out that many organizations may actualy be hybrids (i.e. mix several ways of organizing to allocate resorces effectively)....

  8. The Matrix Organization Revisited

    DEFF Research Database (Denmark)

    Gattiker, Urs E.; Ulhøi, John Parm

    1999-01-01

    This paper gives a short overview of matrix structure and technology management. It outlines some of the characteristics and also points out that many organizations may actualy be hybrids (i.e. mix several ways of organizing to allocate resorces effectively).......This paper gives a short overview of matrix structure and technology management. It outlines some of the characteristics and also points out that many organizations may actualy be hybrids (i.e. mix several ways of organizing to allocate resorces effectively)....

  9. Primary structure and phosphorylation of dentin matrix protein 1 (DMP1) and dentin phosphophoryn (DPP) uniquely determine their role in biomineralization.

    Science.gov (United States)

    Deshpande, Atul Suresh; Fang, Ping-An; Zhang, Xiaoyuan; Jayaraman, Thottala; Sfeir, Charles; Beniash, Elia

    2011-08-08

    The SIBLING (small integrin-binding ligand N-linked glycoproteins) family is the major group of noncollagenous proteins in bone and dentin. These extremely acidic and highly phosphorylated extracellular proteins play critical roles in the formation of collagenous mineralized tissues. Whereas the lack of individual SIBLINGs causes significant mineralization defects in vivo, none of them led to a complete cessation of mineralization suggesting that these proteins have overlapping functions. To assess whether different SIBLINGs regulate biomineralization in a similar manner and how phosphorylation impacts their activity, we studied the effects of two SIBLINGs, dentin matrix protein 1 (DMP1) and dentin phosphophoryn (DPP), on mineral morphology and organization in vitro. Our results demonstrate distinct differences in the effects of these proteins on mineralization. We show that phosphorylation has a profound effect on the regulation of mineralization by both proteins. Specifically, both phosphorylated proteins facilitated organized mineralization of collagen fibrils and phosphorylated DMP1-induced formation of organized mineral bundles in the absence of collagen. In summary, these results indicate that the primary structure and phosphorylation uniquely determine functions of individual SIBLINGs in regulation of mineral morphology and organization.

  10. Differential regulation of dentin matrix protein 1 expression during odontogenesis.

    Science.gov (United States)

    Lu, Yongbo; Zhang, Shubin; Xie, Yixia; Pi, Yuli; Feng, Jian Q

    2005-01-01

    Dentin matrix protein 1 (DMP1) is highly expressed in mineralized tooth and bone. Both in vitro and in vivo data show that DMP1 is critical for mineralization and tooth morphogenesis (growth and development). In this study, we studied Dmp1 gene regulation. The in vitro transient transfection assay identified two important DNA fragments, the 2.4- and 9.6-kb promoter regions. We next generated and analyzed transgenic mice bearing the beta-galactosidase (lacZ) reporter gene driven by the 2.4- or 9.6-kb promoter with the complete 4-kb intron 1. The 9.6-kb Dmp1-lacZ mice conferred a DMP1 expression pattern in odontoblasts identical to that in the endogenous Dmp1 gene. This is reflected by lacZ expression in Dmp1-lacZ knock-in mice during all stages of odontogenesis. In contrast, the 2.4-kb Dmp1-lacZ mice display activity in odontoblast cells only at the early stage of odontogenesis. Thus, we propose that different transcription factors regulate early or later cis-regulatory domains of the Dmp1 promoter, which gives rise to the unique spatial and temporal expression pattern of Dmp1 gene at different stages of tooth development. 2005 S. Karger AG, Basel

  11. Dentin extracellular matrix (ECM) proteins: comparison to bone ECM and contribution to dynamics of dentinogenesis.

    Science.gov (United States)

    Butler, William T; Brunn, Jan C; Qin, Chunlin

    2003-01-01

    Dentinogenesis involves the initial odontoblastic synthesis of a collagen-rich extracellular matrix (ECM) and predentin that is converted to dentin when the collagen fibrils become mineralized. Since the width of predentin is rather uniform, we postulate that extracellular events regulate dentinogenesis. Similarly, osteogenesis involves an initial unmineralized osteoid that is mineralized and converted to bone. To gain insights into these two processes, we compared ECM proteins in bone with those in dentin, focusing upon the sialic acid (SA)-rich proteins. We observed qualitative similarities between the SA-rich proteins, but distinct differences in the amounts of osteopontin (OPN) and dentin sialoprotein (DSP). OPN, a predominant protein in bone, was found in much smaller amounts in dentin. Conversely, DSP was abundant in dentin ECM, but found sparingly in bone. Molecular cloning experiments indicate that coding sequences for DSP and dentin phosphoprotein (DPP) are found on the same mRNA. We believe that the initial form of the precursor protein DSPP is inactive in influencing the mineralization process and that it must be activated by cleavage of peptide bonds in conserved regions. Thus, unknown proteinases would act on DSPP, possibly at the mineralization front, and liberate active DPP, which plays an initiation and regulatory role in the formation of apatite crystals. This post-translational processing reaction would represent an important control point in dentinogenesis. Recently, we identified uncleaved DSPP in dentin extracts, which should allow us to test portions of our hypothesis.

  12. The inhibition effect of non-protein thiols on dentinal matrix metalloproteinase activity and HEMA cytotoxicity.

    Science.gov (United States)

    Nassar, Mohannad; Hiraishi, Noriko; Shimokawa, Hitoyata; Tamura, Yukihiko; Otsuki, Masayuki; Kasugai, Shohei; Ohya, Keiichi; Tagami, Junji

    2014-03-01

    Phosphoric acid (PA) etching used in etch-and-rinse adhesives is known to activate host-derived dentinal matrix-metalloproteinases (MMPs) and increase dentinal permeability. These two phenomena will result, respectively; in degradation of dentine-adhesive bond and leaching of some monomers especially 2-hydroxyethyl methacrylate (HEMA) into the pulp that would negatively affect the viability of pulpal cells. This study is the first to investigate the inhibitory effect of non-protein thiols (NPSH); namely reduced glutathione (GSH) and N-acetylcysteine (NAC) on dentinal MMPs and compare their effects on HEMA cytotoxicity. Dentine powder was prepared from human teeth, demineralized with 1% PA and then treated with 2% GSH, 2% NAC or 2% chlorhexidine (CHX). Zymographic analysis of extracted proteins was performed. To evaluate the effect of GSH, NAC and CHX on HEMA cytotoxicity, solutions of these compounds were prepared with or without HEMA and rat pulpal cells were treated with the tested solutions for (6 and 24h). Cells viability was measured by means of 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. Cytotoxicity data were analysed by one-way ANOVA and Tukey post hoc tests (pcytotoxicity inhibition. NPSH were effective to inhibit dentinal MMPs and HEMA cytotoxicity. The tested properties of NPSH provide promising clinical use of these agents which would enhance dentine-bond durability and decrease post-operative sensitivity. Copyright © 2013 Elsevier Ltd. All rights reserved.

  13. The inhibitory effect of polyvinylphosphonic acid on functional matrix metalloproteinase activities in human demineralized dentin.

    Science.gov (United States)

    Tezvergil-Mutluay, Arzu; Agee, Kelli A; Hoshika, Tomohiro; Tay, Franklin R; Pashley, David H

    2010-10-01

    This study has examined the use of polyvinylphosphonic acid (PVPA) as a potential matrix metalloproteinase (MMP) inhibitor and how brief cross-linking of demineralized dentin matrix that did not affect its mechanical properties enhanced the anti-MMP activity of PVPA. The anti-MMP potential of five PVPA concentrations (100-3000 microgml(-1)) was initially screened using a rhMMP-9 colorimetic assay. Demineralized dentin beams were treated with the same five concentrations of PVPA to collagen and then aged for 30 days in a calcium- and zinc-containing medium. The changes in modulus of elasticity, loss of dry mass and dissolution of collagen peptides were measured via three-point bending, precision weighing and hydroxyproline assay, respectively. All tested PVPA concentrations were highly effective (P<0.05) in inhibiting MMP-9. Ageing in the incubation medium did not significantly alter the modulus of elasticity of the five PVPA treatment groups. Conversely, aged dentin beams from the control group exhibited a significant decline in their modulus of elasticity (P<0.05) over time. Mass loss from the dentin beams and the corresponding increase in hydroxyproline in the medium in the five PVPA treatment groups were significantly lower than for the control (P<0.05). PVPA is a potent inhibitor of endogenous MMP activities in demineralized dentin. It may be used as an alternative to chlorhexidine to prevent collagen degradation within hybrid layers to extend the longevity of resin-dentin bonds.

  14. Combination of aligned PLGA/Gelatin electrospun sheets, native dental pulp extracellular matrix and treated dentin matrix as substrates for tooth root regeneration.

    Science.gov (United States)

    Chen, Gang; Chen, Jinlong; Yang, Bo; Li, Lei; Luo, Xiangyou; Zhang, Xuexin; Feng, Lian; Jiang, Zongting; Yu, Mei; Guo, Weihua; Tian, Weidong

    2015-06-01

    In tissue engineering, scaffold materials provide effective structural support to promote the repair of damaged tissues or organs through simulating the extracellular matrix (ECM) microenvironments for stem cells. This study hypothesized that simulating the ECM microenvironments of periodontium and dental pulp/dentin complexes would contribute to the regeneration of tooth root. Here, aligned PLGA/Gelatin electrospun sheet (APES), treated dentin matrix (TDM) and native dental pulp extracellular matrix (DPEM) were fabricated and combined into APES/TDM and DPEM/TDM for periodontium and dental pulp regeneration, respectively. This study firstly examined the physicochemical properties and biocompatibilities of both APES and DPEM in vitro, and further investigated the degradation of APES and revascularization of DPEM in vivo. Then, the potency of APES/TDM and DPEM/TDM in odontogenic induction was evaluated via co-culture with dental stem cells. Finally, we verified the periodontium and dental pulp/dentin complex regeneration in the jaw of miniature swine. Results showed that APES possessed aligned fiber orientation which guided cell proliferation while DPEM preserved the intrinsic fiber structure and ECM proteins. Importantly, both APES/TDM and DPEM/TDM facilitated the odontogenic differentiation of dental stem cells in vitro. Seeded with stem cells, the sandwich composites (APES/TDM/DPEM) generated tooth root-like tissues after being transplanted in porcine jaws for 12 w. In dental pulp/dentin complex-like tissues, columnar odontoblasts-like layer arranged along the interface between newly-formed predentin matrix and dental pulp-like tissues in which blood vessels could be found; in periodontium complex-like tissues, cellular cementum and periodontal ligament (PDL)-like tissues were generated on the TDM surface. Thus, above results suggest that APES and DPEM exhibiting appropriate physicochemical properties and well biocompatibilities, in accompany with TDM, could

  15. Matrix Embedded Organic Synthesis

    Science.gov (United States)

    Kamakolanu, U. G.; Freund, F. T.

    2016-05-01

    In the matrix of minerals such as olivine, a redox reaction of the low-z elements occurs. Oxygen is oxidized to the peroxy state while the low-Z-elements become chemically reduced. We assign them a formula [CxHyOzNiSj]n- and call them proto-organics.

  16. Host-derived Loss of Dentin Matrix Stiffness Associated with Solubilization of Collagen

    Science.gov (United States)

    Carrilho, Marcela R.; Tay, Franklin R.; Donnelly, Adam M.; Agee, Kelli A.; Tjäderhane, Leo; Mazzoni, Annalisa; Breschi, Lorenzo; Foulger, Stephen; Pashley, David H.

    2009-01-01

    Matrix metalloproteinases (MMPs) bound to dentin matrices are activated during adhesive bonding procedures and are thought to contribute to the progressive degradation of resin-dentin bonds over time. The purpose of this study was to evaluate the changes in mechanical, biochemical and structural properties of demineralized dentin treated with or without chlorhexidine (CHX), a known MMP-inhibitor. After demineralizing dentin beams in EDTA or phosphoric acid (PA), the baseline modulus of elasticity (E) of each beam was measured by 3-point flexure. Specimens were pretreated with water (control) or with 2% CHX (experimental) and then incubated in artificial saliva (AS) at 37°C for 4 weeks. The E of each specimen was remeasured weekly and, the media was analyzed for solubilized dentin collagen at first and fourth week of incubation. Some specimens were processed for electron microscopy (TEM) immediately after demineralization and after 4 weeks of incubation. In EDTA and PA-demineralized specimens, the E of the control specimens fell (p<0.05) after incubation in AS, while there were no changes in E in the CHX-pretreated specimens over time. More collagen was solubilized from PA-demineralized controls (p<0.05) than from EDTA-demineralized matrices after 1 or 4 weeks. Less collagen (p<0.05) was solubilized from CHX-pretreated specimens demineralized in EDTA compared to PA. TEM examination of control beams revealed that prolonged demineralization of dentin in 10% PA (12 h) did not denature the collagen fibrils. PMID:19090493

  17. Host-derived loss of dentin matrix stiffness associated with solubilization of collagen.

    Science.gov (United States)

    Carrilho, Marcela R; Tay, Franklin R; Donnelly, Adam M; Agee, Kelli A; Tjäderhane, Leo; Mazzoni, Annalisa; Breschi, Lorenzo; Foulger, Stephen; Pashley, David H

    2009-07-01

    Matrix metalloproteinases (MMPs) bound to dentin matrices are activated during adhesive bonding procedures and are thought to contribute to the progressive degradation of resin-dentin bonds over time. The purpose of this study was to evaluate the changes in mechanical, biochemical, and structural properties of demineralized dentin treated with or without chlorhexidine (CHX), a known MMP-inhibitor. After demineralizing dentin beams in EDTA or phosphoric acid (PA), the baseline modulus of elasticity (E) of each beam was measured by three-point flexure. Specimens were pretreated with water (control) or with 2% CHX (experimental) and then incubated in artificial saliva (AS) at 37 degrees C for 4 weeks. The E of each specimen was remeasured weekly and, the media was analyzed for solubilized dentin collagen at first and fourth week of incubation. Some specimens were processed for electron microscopy (TEM) immediately after demineralization and after 4 weeks of incubation. In EDTA and PA-demineralized specimens, the E of the control specimens fell (p < 0.05) after incubation in AS, whereas there were no changes in E of the CHX-pretreated specimens over time. More collagen was solubilized from PA-demineralized controls (p < 0.05) than from EDTA-demineralized matrices after 1 or 4 weeks. Less collagen (p < 0.05) was solubilized from CHX-pretreated specimens demineralized in EDTA compared with PA. TEM examination of control beams revealed that prolonged demineralization of dentin in 10% PA (12 h) did not denature the collagen fibrils.

  18. Dentin Sialoprotein is a Novel Substrate of Matrix Metalloproteinase 9 in vitro and in vivo

    Science.gov (United States)

    Yuan, Guohua; Chen, Lei; Feng, Junsheng; Yang, Guobin; Ni, Qingwen; Xu, Xiaoping; Wan, Chunyan; Lindsey, Merry; Donly, Kevin J.; MacDougall, Mary; Chen, Zhi; Chen, Shuo

    2017-01-01

    Dentin sialoprotein (DSP) is essential for dentinogenesis and processed into fragments in the odontoblast-like cells and the tooth compartments. Matrix metalloproteinase 9 (MMP9) is expressed in teeth from early embryonic to adult stage. Although MMP9 has been reported to be involved in some physiological and pathological conditions through processing substrates, its role in tooth development and whether DSP is a substrate of MMP9 remain unknown. In this study, the function of MMP9 in the tooth development was examined by observation of Mmp9 knockout (Mmp9−/−) mouse phenotype, and whether DSP is a substrate of MMP9 was explored by in vitro and in vivo experiments. The results showed that Mmp9−/− teeth displayed a phenotype similar to dentinogenesis imperfecta, including decreased dentin mineral density, abnormal dentin architecture, widened predentin and irregular predentin-dentin boundary. The distribution of MMP9 and DSP overlapped in the odontoblasts, the predentin, and the mineralized dentin, and MMP9 was able to specifically bind to DSP. MMP9 highly efficiently cleaved DSP into distinct fragments in vitro, and the deletion of Mmp9 caused improper processing of DSP in natural teeth. Therefore, our findings demonstrate that MMP9 is important for tooth development and DSP is a novel target of MMP9 during dentinogenesis. PMID:28195206

  19. Effect of Ultraviolet A-induced Crosslinking on Dentin Collagen Matrix

    Science.gov (United States)

    Seseogullari-Dirihan, Roda; Tjäderhane, Leo; Pashley, David H; Tezvergil-Mutluay, Arzu

    2016-01-01

    Objectives The aim of this study was to evaluate the effect of using UVA-induced crosslinking with or without riboflavin as photosensitizers on degradation of dentin matrix by dentin proteases. Methods Demineralized dentin specimens (0.4×3×6mm, n=10/group) were subjected to: (RP1), 0.1% riboflavin-5 phosphate/UVA for 1 min; (RP5), 0.1% riboflavin-5 phosphate/UVA for 5 min; (R1), 0.1% riboflavin/UVA for 1 min; (R5), 0.1% riboflavin-UVA for 5 min; (UV1), UVA for 1 min; (UV5), UVA for 5 min. Specimens were incubated in 1 mL zinc and calcium containing media for 1 day and 1 week. An untreated group served as control (CM). After incubation, the loss of dry mass of samples was measured and aliquots of media were analyzed for the release of C-terminal fragment telopeptide (ICTP vs CTX) of collagen to evaluate for cathepsin K (CA-K) and total matrix metalloproteinase (MMP)-mediated degradation. Data were analyzed using repeated measures ANOVA at α=0.05. Results Although UVA radiation alone reduced dentin degradation, UVA-activated riboflavin or riboflavin-5 phosphate inhibited MMP and CA-K activities more than UVA alone. The effects of crosslinking were more pronounced in 7-day samples; only with CA-K were the effects of crosslinking with or without photosensitizer significantly different from controls in 1-day samples. Significance The use of bioactive forms (RP) or longer treatment time did not result with better effect. The use of UVA crosslinking reduces dentin matrix degradation, especially with photosensitizers. PMID:26314255

  20. Inactivation of Matrix-bound MMPs by Cross-linking Agents in Acid Etched Dentin

    Science.gov (United States)

    Scheffel, Débora Lopes Salles; Hebling, Josimeri; Scheffel, Régis Henke; Agee, Kelly A.; Turco, Gianluca; de Souza Costa, Carlos Alberto; Pashley, David H.

    2014-01-01

    Objectives Published TEM analysis of in vivo resin-dentin bonds shows that in 44 months almost 70% of collagen fibrils from the hybrid layer disappear. Matrix metalloproteinases (MMPs) play an important role in that process and are thought to be the main factor responsible for the solubitization of dentin collagen. Therefore, this study aimed to evaluate the inactivation of matrix-bound MMPs by carbodiimide (EDC) or proanthocyanidin (PA) both cross-linking agents, or the MMP-inhibitor, chlorhexidine (CHX), on acid-etched dentin using a simplified MMP assay method. Methods Dentin beams (1×1×6mm) were obtained from mid-coronal dentin of sound third molars and randomly divided into 6 groups (G) according to the dentin treatment: G1: Deionized water (control), G2: 0.1M EDC, G3: 0.5M EDC, G4: 0.5M EDC+35% HEMA, G5: 5% Proanthocyanidin (PA) and G6: 2% CHX. The beams were etched for 15s with 37% phosphoric acid, rinsed and then immersed for 60s in one of the treatment solutions. The total MMP activity of dentin was analyzed for 1 h by colorimetric assay (Sensolyte). Data were submitted to Wilcoxon non-parametric test and Mann-Whitney tests (p>0.05). Results All experimental cross-linking solutions significantly reduced MMP activity compared to control, except 0.1M EDC (53.6% ±16.1). No difference was observed between cross-linking agents and 2% CHX 0.5M EDC + 35% HEMA (92.3% ±8.0) was similar to 0.5M EDC (89.1% ±6.4), 5% PA (100.8% ±10.9) and 2% CHX (83.4% ±10.9). Conclusion Dentin treatment with cross-linking agents is effective to significantly reduce MMP activity. Mixing 0.5M EDC and 35% HEMA did not influence EDC inhibitor potential. PMID:23786610

  1. Evaluation of matrix metalloproteinase and cysteine cathepsin activity in dentin hybrid layer by gelatin zymography.

    Science.gov (United States)

    Mahalaxmi, Sekar; Madhubala, Manavalan Madhana; Jayaraman, Mahendran; Sathyakumar, Shanmugasundaram

    2016-01-01

    The aim of this study was to comparatively assess the gelatinolytic activity of matrix metalloproteinases(MMPs) and Cysteine Cathepsins (CCs) in the adhesive interface using etch and rinse adhesive at different time intervals using zymographic technique. Twenty freshly extracted non-carious human third molars were used in this study. Occlusal surfaces were ground flat and 1mm thick horizontal dentin slabs were obtained from each tooth using a diamond disc. The dentin surface was polished with 600-grit silicon-carbide paper. Five out of 20 samples were directly pulverized. In the remaining fifteen samples, the dentin was etched and adhesive was applied and light cured according to the manufacturer's instructions. A 1mm thick flowable composite was build up and light cured. Bonded specimens were cut vertically into 3 to 4 dentin slabs by means of diamond disc to expose the adhesive/dentin interfaces. These were then ground down to 500 µm thick resin-dentin interface using a hard tissue microtome. These sections were then pulverised into powder. Following this, every five samples were subjected to zymographic analysis after 1 day, 7 days and 21 days. Zymograms showed clear, thicker bands on all three isoforms in the etched samples compared to control samples at 1st and 7th day intervals and became inactive at 21st day for all three isoforms. MMP 9 activity was relatively higher when compared to CCs and MMP 2. Etch and rinse adhesive activated MMPs and CCs within the hybrid layer that remained active till 7th day and no gelatinolytic activity was found on 21st day and MMPs are more active compared to CCs and MMP-2.

  2. Root maturation and dentin-pulp response to enamel matrix derivative in pulpotomized permanent teeth.

    Science.gov (United States)

    Darwish, Sherif S; Abd El Meguid, Shadia H; Wahba, Nadia A; Mohamed, Ahmed A-R; Chrzanowski, Wojciech; Abou Neel, Ensanya A

    2014-01-01

    The success of pulpotomy of young permanent teeth depends on the proper selection of dressing materials. This study aimed to evaluate the histological and histomorphometric response of dentin-pulp complex to the enamel matrix derivative (Emdogain(®) gel) compared to that of calcium hydroxide when used as a pulp dressing in immature young permanent dogs' teeth. Dentin-like tissues bridging the full width of the coronal pulp at the interface between the injured and healthy pulp tissues were seen after 1 month in both groups. With time, the dentin bridge increased in thickness for calcium hydroxide but disintegrated and fully disappeared for Emdogain-treated group. Progressive inflammation and total pulp degeneration were only evident with Emdogain-treated group. The root apices of Emdogain-treated teeth became matured and closed by cementum that attached to new alveolar bone by a well-oriented periodontal ligament. In young permanent dentition, Emdogain could be a good candidate for periodontium but not dentino-pulpal complex regeneration.

  3. The effect of stromelysin-1 (MMP-3) on non-collagenous extracellular matrix proteins of demineralized dentin and the adhesive properties of restorative resins.

    Science.gov (United States)

    Boukpessi, T; Menashi, S; Camoin, L; Tencate, J M; Goldberg, M; Chaussain-Miller, C

    2008-11-01

    Dentin non-collagenous matrix components (NCPs) are structural proteins involved in the formation, the architecture and the mineralization of the extracellular matrix (ECM). We investigated here how recombinant metalloproteinase stromelysin-1, also termed MMP-3, initiates the release of ECM molecules from artificially demineralized human dentin. Analysis of the supernatants by Western blotting reveals that MMP-3 extracts PGs (decorin, biglycan), and also a series of phosphorylated proteins: dentin sialoprotein (DSP), osteopontin (OPN), bone sialoprotein (BSP) and MEPE, but neither dentin matrix protein-1 (DMP1), another member of the SIBLING family, nor osteocalcin (OC), a non-phosphorylated matrix molecule. After treatment of dentin surfaces by MMP-3, scanning electron microscope (SEM) examination of resin replica shows an increased penetration of the resin into the dentin tubules when compared to surfaces only treated by demineralizing solutions. This preclinical investigation suggests that MMP-3 may be used to improve the adhesive properties of restorative materials.

  4. Clinical and histological responses of human dental pulp to MTA and combined MTA/treated dentin matrix in partial pulpotomy.

    Science.gov (United States)

    Mehrvarzfar, Payman; Abbott, Paul V; Mashhadiabbas, Fatemeh; Vatanpour, Mehdi; Tour Savadkouhi, Sohrab

    2017-08-18

    The aim of this study was to compare the responses of mineral trioxide aggregate (MTA) and combined MTA/treated dentin matrix (TDM) as direct pulp capping material. In this clinical trial study, 33 intact third molars in 11 healthy volunteers (three molars in each) were included. Partial pulpotomies were performed in a split mouth manner in two of the third molars in each patient randomly and the third tooth had used as TDM source. The coronal dentin was chopped to dentine chips and transformed to TDM using different concentrations of ethylene diamine tetraacetic acid (EDTA) solution. Pulps were directly capped by MTA alone or using a combination layering of MTA/TDM. Following 6-week clinical and radiological evaluations, each tooth was extracted and prepared for histological evaluation. There were no significant differences in the clinical and radiographic responses or in the quality of dentin bridges (P > 0.05). However, the dentin bridge was significantly thicker in MTA/TDM group than MTA group (P = 0.003). Using the combination of MTA/TDM as a pulp-dressing agent may form a thicker dentin bridge compared to MTA alone. © 2017 Australian Society of Endodontology Inc.

  5. Enamelin Directs Crystallite Organization at the Enamel-Dentine Junction.

    Science.gov (United States)

    Siddiqui, S; Al-Jawad, M

    2016-05-01

    Enamel is an acellular material formed by the intricate process of amelogenesis. Disruption caused at the initial stages of development, by means of mutations in the ENAM gene encoding the enamelin protein, results in enamel hypoplasia. Little is known about the consequence of ENAM mutation on the enamel structure at a crystallographic level. The aim of this study was to characterize the structure of ENAM-mutated enamel to develop a deeper understanding of the role of enamelin protein during formation with regard to crystal organization. Synchrotron X-ray microdiffraction (SXRD) and scanning electron microscopy (SEM) have been used to measure and correlate enamel crystallography and microstructure in hypoplastic and healthy enamel. Rietveld refinement carried out on 2-dimensional diffraction patterns, collected from the Advanced Photon Source, were used to quantify changes in the preferred orientation (crystallographic texture) within the labial regions of each tooth slice and then correlated with the local microstructure. In general, healthy deciduous incisors displayed a higher degree of crystal organization across the labial surface in comparison with the hypoplastic enamel. ENAM plays the greatest functional role at the enamel-dentine junction (EDJ), as it was the region that exhibited lowest texture relative to unaffected controls. Other areas within the tooth, however, such as the cusp tip, displayed greater organization in line with healthy enamel, suggesting its effects are restricted to the early stages of enamel secretion. Observed clinically, the surface of ENAM-mutated hypoplastic enamel can appear to be normal, yet severe sub-nano and microstructural defects appear beneath the subsurface layer. Quantitative characterization of the crystallographic properties from enamel with known genotype expands the understanding of enamel formation processes and can aid better clinical diagnosis and tailor-made treatment.

  6. Tooth root regeneration using dental follicle cell sheets in combination with a dentin matrix - based scaffold.

    Science.gov (United States)

    Yang, Bo; Chen, Gang; Li, Jie; Zou, Qing; Xie, Dan; Chen, Yali; Wang, Hang; Zheng, Xiaohui; Long, Jie; Tang, Wei; Guo, Weihua; Tian, Weidong

    2012-03-01

    Stem cell mediated tissue engineering has been acknowledged as a prospective strategy for repairing and replacing damaged and lost tissues. However, the low survival rate of implanted stem cells proves to be a major challenge in the management of transplantation failures. While previous studies have indicated the effectiveness of tissue engineered cell sheets in improving the survival rate of implanted cells, we have recently demonstrated the use of treated dentin matrix (TDM) as a biological scaffold and dental follicle cells (DFCs) as the seeding cells for dentinogenesis and tooth root construction. This study proposes a strategy utilizing TDM with human dental follicle cell sheets (DFCSs) for root regeneration. The biological characteristics and changes of human DFCSs under the effect of TDM were studied with scanning electron microscopy, transmission electron microscopy, immunofluorescence microscopy, immunohistochemistry and quantitative real-time PCR. DFCSs combined with TDM were implanted subcutaneously into the dorsum of mice. Histological examination of the harvested grafts revealed a whirlpool-like alignment of the DFCs in multiple layers that were positive for COLI, integrinβ1, fibronectin and alkaline phosphatase (ALP), suggestive of the formation of a rich extracellular matrix. DFCSs, under the effect of TDM, highly expressed DMP-1 and bone sialoprotein (BSP), indicating their potential for odontogenesis and osteogenesis. Importantly, in vivo, TDM could induce and support DFCSs to develop new dentin-pulp like tissues and cementum-periodontal complexes that were positive for markers such as DSP, nestin and VIII factors, COLI and cementum attachment protein (CAP), implying successful root regeneration. Therefore, DFCSs combined with TDM may prove to be a better strategy for the construction of tooth root, and is a prospective approach that could be utilized for the treatment of root or tooth defect or loss in future.

  7. Modified Revascularization in Human Teeth Using an Intracanal Formation of Treated Dentin Matrix: A Report of Two Cases.

    Science.gov (United States)

    Mehrvarzfar, Payman; Abbott, Paul V; Akhavan, Hengameh; Savadkouhi, Sohrab Tour

    2017-01-01

    Ethylenediaminetetraacetic acid (EDTA)-treated dentin matrix (TDM) is an enriched source of bioactive molecules. Therefore, it was hypothesized that fabrication of autogenous TDM on root dentinal walls of necrotic immature permanent teeth may allow more predictable outcome of revascularization treatments. Two young patients with permanent nonvital immature teeth were chosen for revascularization treatment. After appropriate disinfection of root canal system, TDM was fabricated on root dentinal walls using different dilutions of EDTA. Then, bleeding was induced in canals and calcium-enriched mixture (CEM) cement was placed over the blood clots. In all follow-up periods, both cases were asymptomatic and radiographic findings have shown a continued root development. Revascularization is a valuable treatment for nonvital immature teeth, allows continuation of root development. Modification of root regeneration through a TDM protocol may seem more predictable treatment and improve maturogenesis than traditional therapy.

  8. In-vivo Generation of Dental Pulp-Like Tissue Using Human Pulpal Stem Cells, a Collagen Scaffold and Dentin Matrix Protein 1 Following Subcutaneous Transplantation in Mice

    Science.gov (United States)

    Prescott, Rebecca S.; Alsanea, Rajaa; Fayad, Mohamed I.; Johnson, Bradford R.; Wenckus, Christopher S.; Hao, Jianjun; John, Asha S.; George, Anne

    2008-01-01

    The presence of a perforation is known to significantly compromise the outcome of endodontic treatment. One potential use of regenerative endodontic therapy may be the repair of root canal perforations. In addition to nutrients and systemic in-situ interactions, the three main components believed to be essential for tissue regeneration are: stem cells, scaffold, and growth factors. This study investigated the role of each component of the tissue engineering triad in the organization and differentiation of Dental Pulp Stem Cells (DPSCs) in a simulated furcal perforation site using a mouse model. Collagen served as the scaffold and dentin matrix protein 1 (DMP1) was the growth factor. Materials were placed in simulated perforation sites in dentin slices. MTA was the control repair material. At six weeks, the animals were sacrificed and the perforation sites were evaluated by light microscopy and histological staining. Organization of newly derived pulp tissue was seen in the group containing the triad of DPSCs, a collagen scaffold, and DMP1. The other four groups did not demonstrate any apparent tissue organization. Under the conditions of the present study, it may be concluded that the triad of DPSCs, a collagen scaffold, and DMP1 can induce an organized matrix formation similar to that of pulpal tissue, which may lead to hard tissue formation. PMID:18358888

  9. Nucleation of apatite crystals in vitro by self-assembled dentin matrix protein 1

    Science.gov (United States)

    He, Gen; Dahl, Tom; Veis, Arthur; George, Anne

    2003-08-01

    Bones and teeth are biocomposites that require controlled mineral deposition during their self-assembly to form tissues with unique mechanical properties. Acidic extracellular matrix proteins play a pivotal role during biomineral formation. However, the mechanisms of protein-mediated mineral initiation are far from understood. Here we report that dentin matrix protein 1 (DMP1), an acidic protein, can nucleate the formation of hydroxyapatite in vitro in a multistep process that begins by DMP1 binding calcium ions and initiating mineral deposition. The nucleated amorphous calcium phosphate precipitates ripen and nanocrystals form. Subsequently, these expand and coalesce into microscale crystals elongated in the c-axis direction. Characterization of the functional domains in DMP1 demonstrated that intermolecular assembly of acidic clusters into a β-sheet template was essential for the observed mineral nucleation. Protein-mediated initiation of nanocrystals, as discussed here, might provide a new methodology for constructing nanoscale composites by self-assembly of polypeptides with tailor-made peptide sequences.

  10. Requirement of Smad4-mediated signaling in odontoblast differentiation and dentin matrix formation

    Science.gov (United States)

    Yun, Chi-Young; Choi, Hwajung; You, Young-Jae; Yang, Jin-Young

    2016-01-01

    Dentin is the major part of tooth and formed by odontoblasts. Under the influence of the inner enamel epithelium, odontoblasts differentiate from ectomesenchymal cells of the dental papilla and secrete pre-dentin which then undergo mineralization into dentin. Transforming growth factor-beta (TGF-β)/bone morphogenetic protein (BMP) signaling is essential for dentinogenesis; however, the precise molecular mechanisms remain unclear. To understand the role of TGF-β/BMP signaling in odontoblast differentiation and dentin formation, we generated mice with conditional ablation of Smad4, a key intracellular mediator of TGF-β/BMP signaling, using Osr2 or OC-Cre mice. Here we found the molars of Osr2CreSmad4 mutant mice exhibited impaired odontoblast differentiation, and normal dentin was replaced by ectopic bone-like structure. In Osr2CreSmad4 mutant mice, cell polarity of odontoblast was lost, and the thickness of crown dentin was decreased in later stage compared to wild type. Moreover, the root dentin was also impaired and showed ectopic bone-like structure similar to Osr2CreSmad4 mutant mice. Taken together, our results suggest that Smad4-dependent TGF-β/BMP signaling plays a critical role in odontoblast differentiation and dentin formation during tooth development. PMID:27722013

  11. TEMPERATURE-DEPENDENCE OF WATER TRANSPORT INTO THE MINERALIZED MATRIX OF FREEZE-DRIED HUMAN DENTIN

    NARCIS (Netherlands)

    VANDERGRAAF, ER; TENBOSCH, JJ

    1991-01-01

    Ten dentine sections cut perpendicular to the dentinal tubules from human mature non-carious third molars, were freeze-dried and then rehydrated by immersion in water at four temperatures, 10, 25, 40 and 70-degrees-C. The uptake of water by the sections was assessed as a function of rehydration time

  12. Immunolocalization of dentin matrix protein-1 in human primary teeth treated with different pulp capping materials.

    Science.gov (United States)

    Lourenço Neto, Natalino; Marques, Nádia C T; Fernandes, Ana Paula; Rodini, Camila O; Sakai, Vivien T; Abdo, Ruy Cesar C; Machado, Maria Aparecida A M; Santos, Carlos F; Oliveira, Thais M

    2016-01-01

    The aim of this study was to evaluate the immunolocalization of dentin matrix protein (DMP)-1 in human primary teeth treated with different pulp capping materials. Twenty-five primary molars were divided into the following groups: formocresol (FC), calcium hydroxide (CH), mineral trioxide aggregate (MTA), corticosteroid/antibiotic solution + CH (O + CH), and Portland cement (PC), and all received conventional pulpotomy treatment. The teeth at the regular exfoliation period were extracted for histological analysis and immunolocalization of DMP-1. Statistical analysis was performed using the χ(2) test (p < 0.05). Histological analysis revealed statistically significant differences in the comparison among the groups through the use of a score system regarding the presence of hard tissue barrier, odontoblastic layer, and internal resorption, but not regarding pulp calcification. Immunohistochemical analysis showed immunostaining for DMP-1 in groups CH, MTA, O + CH, and PC. Internal resorption was observed in the groups FC and CH. MTA and PC showed pulp repair without inflammation and with the presence of hard tissue barrier. DMP-1 immunostaining was higher for MTA and PC, confirming the reparative and bioinductive capacity of these materials.

  13. Effect of Phosphoric Acid on the Degradation of Human Dentin Matrix

    Science.gov (United States)

    Tezvergil-Mutluay, A.; Mutluay, M.; Seseogullari-Dirihan, R.; Agee, K.A.; Key, W.O.; Scheffel, D.L.S.; Breschi, L.; Mazzoni, A.; Tjäderhane, L.; Nishitani, Y.; Tay, F.R.; Pashley, D.H.

    2013-01-01

    This study determined if dentin proteases are denatured by phosphoric acid (PA) used in etch-and-rinse dentin adhesives. Dentin beams were completely demineralized with EDTA for 30 days. We “acid-etched” experimental groups by exposing the demineralized dentin beams to 1, 10, or 37 mass% PA for 15 sec or 15 min. Control beams were not exposed to PA but were incubated in simulated body fluid for 3 days to assay their total endogenous telopeptidase activity, by their ability to solubilize C-terminal crosslinked telopeptides ICTP and CTX from insoluble dentin collagen. Control beams released 6.1 ± 0.8 ng ICTP and 0.6 ± 0.1 ng CTX/mg dry-wt/3 days. Positive control beams pre-incubated in p-aminophenylmercuric acetate, a compound known to activate proMMPs, released about the same amount of ICTP peptides, but released significantly less CTX. Beams immersed in 1, 10, or 37 mass% PA for 15 sec or 15 min released amounts of ICTP and CTX similar to that released by the controls (p > 0.05). Beams incubated in galardin, an MMP inhibitor, or E-64, a cathepsin inhibitor, blocked most of the release of ICTP and CTX, respectively. It is concluded that PA does not denature endogenous MMP and cathepsin activities of dentin matrices. PMID:23103634

  14. The effect of stromelysin-1 (MMP-3) on non-collagenous extracellular matrix proteins of demineralized dentin and the adhesive properties of restorative resins

    NARCIS (Netherlands)

    T. Boukpessi; S. Menashi; L. Camoin; J.M. ten Cate; M. Goldberg; C. Chaussain-Miller

    2008-01-01

    Dentin non-collagenous matrix components (NCPs) are structural proteins involved in the formation, the architecture and the mineralization of the extracellular matrix (ECM). We investigated here how recombinant metalloproteinase stromelysin-1, also termed MMP-3, initiates the release of ECM molecule

  15. Morphology and thickness of the diffusion of resin through demineralized or unconditioned dentinal matrix

    Directory of Open Access Journals (Sweden)

    Arrais César Augusto Galvão

    2002-01-01

    Full Text Available The formation of a hybrid layer is the main bonding mechanism of current dentin-bonding systems. This study evaluated the morphology and thickness of the resin-infiltrated dentinal layer after the application of adhesive systems. The dentin-bonding agents were evaluated on flat dentinal preparations confected on the occlusal surfaces of human teeth. The test specimens were prepared and inspected under scanning electron microscopy at a magnification of X 2,000. The adhesive systems were responsible for different hybrid layer thicknesses (p < 0.05, and the mean values were: for Scotchbond MP Plus (SM, 7.41 ± 1.24mum; for Single Bond (SB, 5.55 ± 0.82mum; for Etch & Prime 3.0 (EP, 3.86 ± 1.17mum; and for Clearfil SE Bond (CB, 1.22 ± 0.45mum. The results suggest that the conventional three-step adhesive system (SM was responsible for the thickest hybrid layer, followed by the one-bottle adhesive (SB. The self-etching adhesives, EP and CB, produced the formation of the thinnest hybrid layers.

  16. Effects of different lasers on organic/inorganic ratio of radicular dentin.

    Science.gov (United States)

    Lopes, F C; Roperto, R; Akkus, A; Akkus, O; Souza-Gabriel, A E; Sousa-Neto, M D

    2016-04-01

    The aim of this study was to evaluate the chemical stability of endodontic-treated root dentin after different laser irradiations through Raman spectroscopy. Fifty maxillary canines were selected and prepared with K3 system. Roots were randomly distributed into five groups (n = 10) according to the surface treatment: GI (water), GII (NaOCl + EDTA), GIII (NaOCl + EDTA + 980 nm Diode laser), GIV (NaOCl + EDTA+ 1064 nm Nd: YAG laser) and GV (NaOCl + EDTA+ 2780 nm Er,Cr: YSGG laser). Lasers were applied for 20 s. Samples were bisected, and the organic and inorganic content of dentin was analyzed by Raman spectroscopy. Data were submitted to ANOVA and Tukey tests (p laser had a reduced collagen content (GV-290.7 ± 41.7) compared with the water-treated roots (GI-328.3 ± 63.5) and those treated with NaOCl + EDTA (GII-333.9 ± 55.8). Roots irradiated with Er,Cr: YSGG laser also showed a higher inorganic/organic ratio (GV-9.5 ± 1.1) than roots treated with water (GI-7.7 ± 1.5), NaOCl + EDTA (GII-8.0 ± 1.4) and diode laser (GIII-8.2 ± 1.6). Both organic and inorganic contents increased from cervical to apical thirds in all groups. None of the surface treatments were able to promote changes in the inorganic content of the root dentin; treatment with NaOCl + EDTA combined with Er,Cr: YSGG altered collagen.

  17. The rescue of dentin matrix protein 1 (DMP1)-deficient tooth defects by the transgenic expression of dentin sialophosphoprotein (DSPP) indicates that DSPP is a downstream effector molecule of DMP1 in dentinogenesis.

    Science.gov (United States)

    Gibson, Monica Prasad; Zhu, Qinglin; Wang, Suzhen; Liu, Qilin; Liu, Ying; Wang, Xiaofang; Yuan, Baozhi; Ruest, L Bruno; Feng, Jian Q; D'Souza, Rena N; Qin, Chunlin; Lu, Yongbo

    2013-03-08

    Dentin matrix protein 1 (DMP1) and dentin sialophosphoprotein (DSPP) are essential for the formation of dentin. Previous in vitro studies have indicated that DMP1 might regulate the expression of DSPP during dentinogenesis. To examine whether DMP1 controls dentinogenesis through the regulation of DSPP in vivo, we cross-bred transgenic mice expressing normal DSPP driven by a 3.6-kb rat Col1a1 promoter with Dmp1 KO mice to generate mice expressing the DSPP transgene in the Dmp1 KO genetic background (referred to as "Dmp1 KO/DSPP Tg mice"). We used morphological, histological, and biochemical techniques to characterize the dentin and alveolar bone of Dmp1 KO/DSPP Tg mice compared with Dmp1 KO and wild-type mice. Our analyses showed that the expression of endogenous DSPP was remarkably reduced in the Dmp1 KO mice. Furthermore, the transgenic expression of DSPP rescued the tooth and alveolar bone defects of the Dmp1 KO mice. In addition, our in vitro analyses showed that DMP1 and its 57-kDa C-terminal fragment significantly up-regulated the Dspp promoter activities in a mesenchymal cell line. In contrast, the expression of DMP1 was not altered in the Dspp KO mice. These results provide strong evidence that DSPP is a downstream effector molecule that mediates the roles of DMP1 in dentinogenesis.

  18. Developmental appearance of dentin matrix protein 1 during the early dentinogenesis in rat molars as identified by high-resolution immunocytochemistry.

    Science.gov (United States)

    Massa, Luciana F; Ramachandran, Amsaveni; George, Anne; Arana-Chavez, Victor E

    2005-09-01

    Dentin matrix protein 1 (DMP 1) is an acidic phosphoprotein that has been postulated to play an important role in mineralized tissue formation. We have examined rat molar tooth germs by applying a high-resolution immunocytochemical approach with the purpose to identify the temporal and spatial localization of DMP 1 at the onset of dentinogenesis. Upper molar tooth germs of 2- to 3-day-old Wistar rats were fixed in a cacodylate-buffered 0.1% glutaraldehyde + 4% formaldehyde fixative, left unosmicated and embedded in LR White resin. The sections were incubated with a polyclonal DMP 1 antibody for postembedding colloidal gold immunolabeling and examined in a Jeol 1010 transmission electron microscope. The earliest localization of DMP 1 was in the Golgi region as well as in the nucleus of differentiating odontoblasts. When mineralization spread from matrix vesicles to the surrounding matrix, DMP 1 was extracellularly detected around the mineralizing globules. In the regions of fully mineralized mantle dentin, it was present in the mineralized regions, mainly around the peritubular dentin. The appearance of DMP 1 during early dentinogenesis implies a direct role for this protein in both odontoblast differentiation and matrix mineralization.

  19. Effect of different concentrations of specific inhibitor of matrix metalloproteinases on the shear bond strength of self-adhesive resin cements to dentin

    Science.gov (United States)

    Ebrahimi-Chaharom, Mohammad-Esmaeel; Abed-Kahnamoui, Mehdi; Hamishehkar, Hamed; Gharouni, Mahya

    2017-01-01

    Background Considering the probability of chemical and enzymatic reactions between matrix metalloproteinases (MMPs) in the dentin structure and their specific inhibitors, the aim of the present study was to evaluate the effect of different concentrations of specific inhibitor of MMPs (galardin) on the shear bond strength of self-adhesive resin cements to dentin. Material and Methods Forty-eight sound human premolars were mounted in self-cured acrylic resin after removal of the enamel on the buccal and lingual surfaces. The dentin surfaces achieved were polished and prepared with 600-grit silicon carbide paper. The samples were divided into 3 groups (n=16) based on the concentration of galardin used (with no galardin, galardin at a high concentration and galardin at a low concentration). In addition, 96 composite resin blocks, measuring 3 mm in height and diameter, were prepared. The composite resin blocks were bonded to the buccal and lingual surface dentin with Rely-X Unicem (RXC) and Speed CEM (SPC) self-adhesive resin cements, respectively, according to manufacturers’ instructions. After 24 hours of storage in distilled water at 37°C, the shear bond strength values were determined in MPa and fracture modes were evaluated under a stereomicroscope. Data were analyzed with two-way ANOVA and post-hoc Bonferroni test (α=0.05). Results The shear bond strength of galardin at high concentration was significantly higher than that in the control group and galardin at a low concentrations (PDental Bonding.

  20. In vitro investigation of fluorescence of carious dentin observed with a Soprolife® camera.

    Science.gov (United States)

    Panayotov, Ivan; Terrer, Elodie; Salehi, Hamideh; Tassery, Hervé; Yachouh, Jacques; Cuisinier, Frédéric J G; Levallois, Bernard

    2013-04-01

    Our aim was to determine the origin of the red fluorescence of carious dentine observed with the Soprolife® camera. We conducted in vitro studies to evaluate the origin of the red fluorescence using acids and matrix metalloproteinase (MMP) to mimic caries and methylglycoxal (MGO) to evaluate the effect of glycation reactions on the red fluorescence. In every step of these models, we detected the changes of dentin photonic response with Soprolife® in daylight mode and in treatment mode. A Raman spectroscopy analysis was performed to determine the variations of the dentin organic during the in vitro caries processes. Raman microscopy was performed to identify change in the collagen matrix of dentine. The red fluorescence observed in carious dentine using a Soprolife® camera corresponds to the brownish color observed using daylight. Demineralization using nitric acid induces a loss of the green fluorescence of dentine. The red fluorescence of carious dentine is resistant to acid treatment. Immersion of demineralized dentine in MGO induces a change of color from white to orange-red. This indicates that the Maillard reaction contributes to lesion coloration. Immersion of demineralized dentine in an MMP-1 solution followed by MGO treatment results in a similar red fluorescence. Raman microspectroscopy analysis reveals accumulation of AGE's product in red-colored dentine. Our results provide important information on the origin of the fluorescence variation of dentine observed with the Soprolife® camera. We demonstrate that the red fluorescence of carious dentine is linked to the accumulation of Advanced Glycation End products (AGE). The study provides a new biological basis for the red fluorescence of carious dentine and reinforces the importance of the Soprolife® camera in caries diagnostics.

  1. Project-matrix models of marketing organization

    Directory of Open Access Journals (Sweden)

    Gutić Dragutin

    2009-01-01

    Full Text Available Unlike theory and practice of corporation organization, in marketing organization numerous forms and contents at its disposal are not reached until this day. It can be well estimated that marketing organization today in most of our companies and in almost all its parts, noticeably gets behind corporation organization. Marketing managers have always been occupied by basic, narrow marketing activities as: sales growth, market analysis, market growth and market share, marketing research, introduction of new products, modification of products, promotion, distribution etc. They rarely found it necessary to focus a bit more to different aspects of marketing management, for example: marketing planning and marketing control, marketing organization and leading. This paper deals with aspects of project - matrix marketing organization management. Two-dimensional and more-dimensional models are presented. Among two-dimensional, these models are analyzed: Market management/products management model; Products management/management of product lifecycle phases on market model; Customers management/marketing functions management model; Demand management/marketing functions management model; Market positions management/marketing functions management model. .

  2. The combination use of platelet-rich fibrin and treated dentin matrix for tooth root regeneration by cell homing.

    Science.gov (United States)

    Ji, Baohui; Sheng, Lei; Chen, Gang; Guo, Shujuan; Xie, Li; Yang, Bo; Guo, Weihua; Tian, Weidong

    2015-01-01

    Endogenous regeneration through cell homing provides an alternative approach for tissue regeneration, except cell transplantation, especially considering clinical translation. However, tooth root regeneration through cell homing remains a provocative approach in need of intensive study. Both platelet-rich fibrin (PRF) and treated dentin matrix (TDM) are warehouses of various growth factors, which can promote cell homing. We hypothesized that endogenous stem cells are able to sense biological cues from PRF membrane and TDM, and contribute to the regeneration of tooth root, including soft and hard periodontal tissues. Therefore, the biological effects of canine PRF and TDM on periodontal ligament stem cells (PDLSCs) and bone marrow mesenchymal stem cells (BMSCs) were evaluated respectively in vitro. Beagle dogs were used as orthotopic transplantation model. It was found that PRF significantly recruited and stimulated the proliferation of PDLSCs and BMSCs in vitro. Together, PRF and TDM induced cell differentiation by upregulating the mineralization-related gene expression of bone sialoprotein (BSP) and osteopotin (OPN) after 7 days coculture. In vivo, transplantation of autologous PRF and allogeneic TDM into fresh tooth extraction socket achieved successful root regeneration 3 months postsurgery, characterized by the regeneration of cementum and periodontal ligament (PDL)-like tissues with orientated fibers, indicative of functional restoration. The results suggest that tooth root connected to the alveolar bone by cementum-PDL complex can be regenerated through the implantation of PRF and TDM in a tooth socket microenvironment, probably by homing of BMSCs and PDLSCs. Furthermore, bioactive cues and inductive microenvironment are key factors for endogenous regeneration. This approach provides a tangible pathway toward clinical translation.

  3. Organic Thin Film Electroluminescent Passive Matrix Display

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Long life green-emitting matrix display based on organic light-emitting diode is reported. The pixel number is 96×60, equivalent pixel size 0.4×0.4 mm2, and the pixel gap 0.1 mm. An image with no crosstalk between pixels is obtained. The average luminance of these pixels at duty cycle of 1/64 is 100 cd/m2, and the power consumption is 0.6 W. The dark room contrast of 1:100 is achieved without using a polarization filter.

  4. How to get the Matrix Organization to Work

    DEFF Research Database (Denmark)

    Burton, Richard M.; Obel, Børge; Håkonsson, Dorthe Døjbak

    2015-01-01

    Many organizations, both public and private, are changing their structure to a complex matrix in order to meet the growing complexity in the world in which they operate. Often, those organizations struggle to obtain the benefits of a matrix organization. In this article, we discuss how to get...... a matrix to work, taking a multi-contingency perspective. We translate the matrix concept for designers and managers who are considering a matrix organization and argue that three factors are critical for its success: (1) Strong purpose: Only choose the matrix structure if there are strong reasons...

  5. Association Between Dentin Matrix Protein 1 (rs10019009) Polymorphism and Ankylosing Spondylitis in a Chinese Han Population from Shandong Province

    Institute of Scientific and Technical Information of China (English)

    Jian-Min Liu; Ya-Zhou Cui; Geng-Lin Zhang; Xiao-Yan Zhou; Jing-Xiang Pang; Xue-Zheng Wang; Jin-Xiang Han

    2016-01-01

    Background:Ankylosing spondylitis (AS) is the most common rheumatic condition that is slowly progressive and predominantly affects adolescents.Pathological bone formation associated with AS is an important cause of disability.The aim of the study was to investigate the possible involvement of the genes related to endochondral ossification and ectopia ossification in genetic susceptibility to AS in a Chinese Han population.Methods:Sixty-eight single nucleotide polymorphisms (SNPs) from 13 genes were genotyped in discovery cohorts including 300 AS patients and 180 healthy controls.The rs10019009 in dentin matrix protein 1 (DMP1) gene shown as association with AS after multiple testing corrections in discovery cohorts was replicated in a validation independent cohort of 620 AS patients and 683 healthy controls.The rs 10019009 was assessed with bioinformatics including phylogenetic context,F-SNP and FastSNP functional predictions,secondary structure prediction,and molecular modeling.We performed a functional analysis of rs10019009 via reverse transcription-polymerase chain reaction,alkaline phosphatase (ALP) activity in human osteosarcoma U2OS cells.Results:Interestingly,the SNP rs10019009 was associated with AS in both the discovery cohort (P =0.0012) and validation cohort (P =0.0349),as well as overall (P =0.0004) in genetic case-control association analysis.After a multivariate logistic regression analysis,the effect of this genetic variant was observed to be independent of linkage disequilibrium.Via bioinformatics analysis,it was found that the amino acid change of the rs10019009 led to changes of SNP function,secondary structure,tertiary conformation,and splice mode.Finally,functional analysis of rs 10019009 in U2OS cells demonstrated that the risk T allele of the rs 10019009 increased enzymatic activity of ALP,compared to that of the nonrisk allele (P =0.0080).Conclusions:These results suggested that the DMP1 gene seems to be involved in genetic predisposition to

  6. Bio-modification approach for novel dentine caries management by Galla chinesis extract and microbial transglutaminase

    Directory of Open Access Journals (Sweden)

    Meng Deng

    2012-01-01

    Full Text Available Introduction: Dental caries still remains one of the most prevalent diseases worldwide. Unlike enamel caries which can be restored mainly by modulating mineral balance, the dentine caries are characterized with irreversible proteolytic disintegration of organic matrices, highlighting an urgent need to seek novel management strategies. Bio-modification of dentine matrix has been proposed as a novel and alternative approach to enhancing its biochemical and biomechanical properties. The resultant chemical stability and mechanic durability are specifically desirable for prevention and restoration of dentine caries. However, conventional cross linking agents, e.g. glutaraldehyde, formaldehyde,are unsuitable for clinical use due to marked cytotoxicity or instability over time. The Hypothesis: Previous studies revealed that Galla chinesis extract (GCE could inhibit cariogenic microbes and positively modulate enamel de/remineralization balance, and the mechanism was directed to the polyphenols-organic matrix interaction involving hydrogen, covalent, ionic bonding and hydrophobic processes. Microbial transglutaminase (mTGase could induce crosslinks between peptide chains and improve functional properties of food proteins by catalyzing an acyl transfer reaction through ε - (γ-glutamyl lysine (GL bonds. Given the high organic content in dentine and universal reaction nature of GCE and mTGase, we put forward a hypothesis that these two natural products may serve as novel biocompatible bio-modifiers to improve biochemical and biomechanical properties of dentine matrices. Evaluation of the Hypothesis: The validation of our hypothesis will provide profound insights updating current therapeutic strategies against dentine caries, and pioneer novel approaches for biocompatible bio-modification of dentine matrices. Specifically, GCE and mTGase can be integrated into the root canal irrigating and dentine boding procedures, where they may generate beneficial

  7. Effect of EDTA on TGF-β1 released from the dentin matrix and its influence on dental pulp stem cell migration.

    Science.gov (United States)

    Gonçalves, Lidiany Freitas; Fernandes, Ana Paula; Cosme-Silva, Leopoldo; Colombo, Fabio Antonio; Martins, Natália Silva; Oliveira, Thais Marchini; Araujo, Tomaz Henrique; Sakai, Vivien Thiemy

    2016-12-22

    Bioactive molecules stored in dentin, such as transforming growth factor beta1 (TGF-b1), may be involved in the signaling events related to dental tissue repair. The authors conducted an in vitro evaluation of the amount of TGF-b1 released from dentin slices after treatment with 10% ethylenediaminetetraacetic acid (EDTA), 2.5% sodium hypochlorite (NaOCl) or phosphate-buffered saline (PBS), and the effect of this growth factor on stem cell migration from human exfoliated deciduous teeth (SHED). Sixty 1-mm-thick tooth slices were prepared with or without the predentin layer, and treated with either 10% EDTA for 1 minute, 2.5% NaOCl for 5 days or kept in PBS. Tooth slice conditioned media were prepared and used for TGF-b1 ELISA and migration assays. Culture medium with different concentrations of recombinant human TGF-b1 (0.5, 1.0, 5.0 or 10.0 ng/mL) was also tested by migration assay. The data were evaluated by ANOVA and Tukey's test. Optical density values corresponding to media conditioned by tooth slices either containing or not containing the predentin layer and treated with 10% EDTA were statistically greater than the other groups and close to 1 ng/mL. Increased rates of migration toward media conditioned by tooth slices containing the predentin layer and treated with PBS, 10% EDTA or 2.5% NaOCl were observed. Recombinant human TGF-b1 also stimulated migration of SHED, irrespective of the concentration used. EDTA may be considered an effective extractant of TGF-b1 from the dentin matrix. However, it does not impact SHED migration, suggesting that other components may account for the cell migration.

  8. Role of Dentin MMPs in Caries Progression and Bond Stability

    OpenAIRE

    A. Mazzoni; Tjäderhane, L.; Checchi, V.; Di Lenarda, R.; Salo, T.; Tay, F.R.; Pashley, D.H.; Breschi, L

    2015-01-01

    Dentin can be described as a biological composite with collagen matrix embedded with nanosized hydroxyapatite mineral crystallites. Matrix metalloproteinases (MMPs) and cysteine cathepsins are families of endopeptidases. Enzymes of both families are present in dentin and collectively capable of degrading virtually all extracellular matrix components. This review describes these enzymes and their presence in dentin, mainly focusing on their role in dentin caries pathogenesis and loss of collag...

  9. Matrix Organizational Structure and Its Effects Upon Education Organizations.

    Science.gov (United States)

    Yates, James R.

    Applying matrix organizational structure to the organization of special education services is the focus of this paper. Beginning with a list of ways in which educational organizations differ from business or military organizations, the author warns that educators must be cautious when transferring organizational structures from other disciplines…

  10. Optimizing dentin bond durability: strategies to prevent hydrolytic degradation of the hybrid layer

    Science.gov (United States)

    Tjäderhane, Leo; Nascimento, Fabio D.; Breschi, Lorenzo; Mazzoni, Annalisa; Tersariol, Ivarne L.S.; Geraldeli, Saulo; Tezvergil-Mutluay, Arzu; Carrilho, Marcela; Carvalho, Ricardo M.; Tay, Franklin R.; Pashley, David H.

    2014-01-01

    Objectives Endogenous dentin collagenolytic enzymes, matrix metalloproteinases (MMPs) and cysteine cathepsins, are responsible for the time-related hydrolysis of collagen matrix of the hybrid layers. As the integrity of the collagen matrix is essential for the preservation of long-term dentin bond strength, inhibition or inactivation of endogenous dentin proteases is necessary for durable resin-bonded composite resin restorations. Methods Dentin contains collagenolytic enzymes, matrix metalloproteinases (MMPs) and cysteine cathepsins, which are responsible for the hydrolytic degradation of collagen matrix in the bonded interface. Several tentative approaches to prevent enzyme function either directly or indirectly have been proposed in the literature. Results Chlorhexidine, a general inhibitor of both MMPs and cysteine cathepsins, applied before primer/adhesive application is the most tested method. In general, these experiments have shown that enzyme inhibition is a promising scheme to improve hybrid layer preservation and bond strength durability. Other enzyme inhibitors, e.g. enzyme-inhibiting monomers and antimicrobial compounds, may be considered promising alternatives that would allow more simple clinical application than chlorhexidine. Cross-linking collagen and/or dentin organic matrix-bound enzymes could render hybrid layer organic matrix resistant to degradation, and complete removal of water from the hybrid layer with ethanol wet bonding or biomimetic remineralization should eliminate hydrolysis of both collagen and resin components. Significance Identification of the enzymes responsible for the hydrolysis of hybrid layer collagen and understanding their function has prompted several innovative approaches to retain the hybrid layer integrity and strong dentin bonding. The ultimate goal, prevention of collagen matrix degradation with techniques and commercially available materials that are simple and effective in clinical settings may be achievable in

  11. Surface functionalization of metal organic frameworks for mixed matrix membranes

    Energy Technology Data Exchange (ETDEWEB)

    Albenze, Erik; Lartey, Michael; Li, Tao; Luebke, David R.; Nulwala, Hunaid B.; Rosi, Nathaniel L.; Venna, Surendar R.

    2017-03-21

    Mixed Matrix Membrane (MMM) are composite membranes for gas separation and comprising a quantity of inorganic filler particles, in particular metal organic framework (MOF), dispersed throughout a polymer matrix comprising one or more polymers. This disclosure is directed to MOF functionalized through addition of a pendant functional group to the MOF, in order to improve interaction with a surrounding polymer matrix in a MMM. The improved interaction aids in avoiding defects in the MMM due to incompatible interfaces between the polymer matrix and the MOF particle, in turn increasing the mechanical and gas separation properties of the MMM. The disclosure is also directed to a MMM incorporating the surface functionalized MOF.

  12. Effect of phytic acid etchant on the structural stability of demineralized dentine and dentine bonding.

    Science.gov (United States)

    Kong, Kalyan; Islam, Md Sofiqul; Nassar, Mohannad; Hiraishi, Noriko; Otsuki, Masayuki; Yiu, Cynthia K Y; Tagami, Junji

    2015-08-01

    This study examined the effect of phytic acid (IP6) in stabilizing the morphology of dentine collagen network and resin-dentine bonding. Dentine beams were fully demineralized with 10% phosphoric acid (PA) or 1% IP6 (pH 1.2). PA-demineralized beams were divided into three groups: (a) no further treatment (control), (b) treatment with 5% glutaraldehyde (GA) for 1 h and (c) treatment with 1% IP6 (pH 7) for 1 h. IP6-demineralized beams received no further treatment. The beams were then subjected to ultimate tensile strength (UTS) testing. Dentine micromorphology evaluation was performed using a field-emission scanning electron microscope (FE-SEM). Dentine disks were etched with 35% PA for 15 s or 1% IP6 for 30s. PA-etched dentine disks were divided into three groups as (a), (b) and (c) as for UTS testing, but the treatment with GA or IP6 was done in 1min. For microtensile bond strength (µTBS) testing, flat dentine surfaces etched with PA or IP6 were blot-dried (wet dentine) or air-dried for 10s (dry dentine) and bonded with an etch-and-rinse adhesive followed by composite build-up. IP6-demineralized dentine showed significantly higher UTS, when compared to PA-demineralized dentine. GA and IP6 significantly improved UTS of PA-demineralized dentine. FE-SEM observation revealed that dentine collagen network was preserved by GA and IP6. No significant difference in µTBS was found between the wet and dry IP6-etched dentine groups. IP6 etching showed a structural stabilizing effect on demineralized dentine matrix and produced good resin-dentine bonding, regardless of dentine moistness or dryness. Copyright © 2015 Elsevier Ltd. All rights reserved.

  13. Dentinal tubules driven wetting of dentin: Cassie-Baxter modelling

    Science.gov (United States)

    Ramos, S. M. M.; Alderete, L.; Farge, P.

    2009-10-01

    We investigate the wetting properties of dentin surfaces submitted to a phosphoric acid etching followed by an air drying procedure, as in clinical situations of adhesive dentistry. The surface topography of the etched surfaces was characterized by AFM, and the wetting properties of water on these rough and heterogeneous surfaces were studied, by contact angle measurements. We showed that the contact angle increases with the acid exposure time and consequently with both surface roughness and the organic-mineral ratio of the dentin components. From the whole results, obtained on dentin and also on synthesized hydroxyapatites samples, we inferred a water contact angle of ˜ 133° on the dentinal tubule. These experimental results may be described by the Cassie-Baxter approach, and it is suggested that small air pockets could be formed inside the dentinal tubules.

  14. Organ-specific chemotactic factors present in lung extracellular matrix.

    Science.gov (United States)

    Cerra, R F; Nathanson, S D

    1989-05-01

    The preferential colonization of a distant organ by a circulating tumor cell (organ specific metastasis) may be regulated by chemotactic factors present within the extracellular matrix of the host organ. Organ-specific extracellular matrix was prepared from murine kidney and lung by high salt extraction and DNAase/RNAase digestion. A soluble protein fraction (S2) from each of the matricies was obtained by 4 M guanidine extraction and was tested for organ-specific chemotactic activity in a modified Boyden chamber. The lung colonizing B16-F10 and B16-BL6 tumor cell lines demonstrated organ-specific motility only toward the lung extract. The low metastasizing B16 parental line and liver colonizing B16-L4b line showed no preference for either lung or kidney. The lung activity resolves into five fractions by gel filtration chromatography, with the highest activity eluting at Mr approximately 71,000. Chemotactic factors present in lung extracellular matrix may regulate the preferential colonization of an organ by stimulating the migration of tumor cells in a specific manner. These factors may be released during the degradation of the extracellular matrix.

  15. Adhesion to bovine dentin--surface characterization.

    Science.gov (United States)

    Ruse, N D; Smith, D C

    1991-06-01

    X-ray photo-electron spectroscopy (XPS) and secondary ion mass spectrometry (SIMS) were used to characterize the dentin surface, to determine the effects of different pre-conditioning procedures on the elemental composition of the dentin surface, and to investigate the interaction between dentin and a dentin bonding agent (ScotchBond) by studying the changes in the elemental composition of dentin as a result of the interaction. Scanning electron microscopy (SEM) was used to characterize sample surface morphology, which was then correlated with surface elemental composition. The results showed that: (a) the elemental composition of the smear layer was similar to that of the underlying dentin; (b) cleaning with hydrogen-peroxide did not produce any modification in the elemental composition of the dentin surface; and (c) acid-etching led to an almost complete demineralization of the dentin, leaving behind an organic-rich surface. The results suggest that bonding systems that use acid-etching as a pre-conditioning procedure should be based on agents able to interact with the organic components of dentin, since bonding agents that rely on a chelation-to-calcium reaction are unlikely to be successful. The investigation of the interaction between the bonding agent and dentin led to a postulated adhesive-bonding reaction mechanism and suggested a partially cohesive failure in the bonding agent during fracturing of a dentin-bonding-agent-bonded assembly.

  16. Isolated dentinogenesis imperfecta and dentin dysplasia: revision of the classification.

    Science.gov (United States)

    de La Dure-Molla, Muriel; Philippe Fournier, Benjamin; Berdal, Ariane

    2015-04-01

    Dentinogenesis imperfecta is an autosomal dominant disease characterized by severe hypomineralization of dentin and altered dentin structure. Dentin extra cellular matrix is composed of 90% of collagen type I and 10% of non-collagenous proteins among which dentin sialoprotein (DSP), dentin glycoprotein (DGP) and dentin phosphoprotein (DPP) are crucial in dentinogenesis. These proteins are encoded by a single gene: dentin sialophosphoprotein (DSPP) and undergo several post-translational modifications such as glycosylation and phosphorylation to contribute and to control mineralization. Human mutations of this DSPP gene are responsible for three isolated dentinal diseases classified by Shield in 1973: type II and III dentinogenesis imperfecta and type II dentin dysplasia. Shield classification was based on clinical phenotypes observed in patient. Genetics results show now that these three diseases are a severity variation of the same pathology. So this review aims to revise and to propose a new classification of the isolated forms of DI to simplify diagnosis for practitioners.

  17. Research progress on demineralized osteoinduction of deminerlized dentin matrix%脱矿牙本质基质骨诱导作用的研究

    Institute of Scientific and Technical Information of China (English)

    鲍济波

    2011-01-01

    因外伤、感染和肿瘤术后造成的牙槽骨损伤,经常需要植入骨或骨替代物.随着种植技术的日渐成熟,骨增量技术在种植修复中的应用越来越广泛,对骨替代材料的研究也越来越多.脱矿牙本质基质因其来源广泛,是近年来研究较多的一种骨诱导材料.本文就脱矿牙本质基质的分类、制备、作用、生物相容性和骨诱导机制作一综述.%Bone or bone substitute material graft is always introduced when the dental bone defect occurs due to trauma, infection, or tumor surgery. As the application of dental implants became more scientific, bone augmentation technique is now widely used and plenty of researches have been done on bone substitutes. Deminerlized dentin matrix(DDM) is a widespread osteoinductive material these years, because it is easy to obtain. This article is a general review and conclusion of the classification preparation, effect, biocompatibility and the mechanism of osteoinduction of DDM.

  18. Matrix metalloproteinases'influence on durability of dentin bonding%基质金属蛋白酶对牙本质粘接耐久性的影响

    Institute of Scientific and Technical Information of China (English)

    王恒

    2012-01-01

    Matrix metalloproteinases (MMP) are a family of proteolytic enzymes with the main function of hy-drolyzing extracellular matrix, of which activity requires calcium and zinc ions. The acidic component of dentin adhesives can activate the pro-MMP to degrade the nude collagen fibrils and destroy the interface of resin-dentin bond which leads to the failure of binding. Inhibiting MMP will increase bond durability. The purpose of this article is to review the research progress of MMP's activating in resin-dentin bond and influence on bond durability, special attention being devoted to the means to inhibiting or inactivating MMP.%基质金属蛋白酶(MMP)是一组分解细胞外基质的钙锌离子依赖型蛋白酶的总称.牙本质粘接剂酸性环境可以激活MMP酶原,进而分解暴露的胶原纤维,破坏粘接界面而导致粘接的失败.抑制MMP可有效增加粘接耐久性.本文就MMP在粘接过程中的激活和对粘接耐久性的影响以及MMP抑制剂的研究进展作一综述.

  19. Site specific properties of carious dentin matrices biomodified with collagen cross-linkers

    Science.gov (United States)

    Bedran-Russo, Ana K.; Karol, Sachin; Pashley, David H.; Viana, Grace

    2014-01-01

    Purpose To assess in non-cavitated carious teeth the mechanical properties of dentin matrix by measuring its reduced modulus of elasticity and the effect of dentin biomodification strategies on three dentin matrix zones: caries-affected, apparently normal dentin below caries-affected zone and sound dentin far from carious site. Methods Nano-indentations were performed on dentin matrices of carious molars before and after surface modification using known cross-linking agents (glutaraldehyde, proanthocyanidins from grape seed extract and carbodiimide). Results Statistically significant differences were observed between dentin zones of demineralized dentin prior to surface biomodification (P< 0.05). Following surface modification, there were no statistically significant differences between dentin zones (P< 0.05). An average increase of 30-fold, 2-fold and 2.2-fold of the reduced modulus of elasticity was observed following treatments of the three dentin zones with proanthocyanidin, carbodiimide and glutaraldehyde, respectively. PMID:24479274

  20. Passive Matrix Organic Electroluminescent Display for 3G Cellular Phone

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The major features of the display technologies for 3G cellular phone are reviewed. The comparison between their potential candidates for 3G cellular phone is given, and a detailed discussion is made on passive matrix organic electroluminescent display technology. A novel method to improve display contrast ratio is presented. Finally several 3G phone set prototypes with OLED display panels are given as well as the market forecast

  1. Laminated active matrix organic light-emitting devices

    Science.gov (United States)

    Liu, Hongyu; Sun, Runguang

    2008-02-01

    Laminated active matrix organic light-emitting device (AMOLED) realizing top emission by using bottom-emitting organic light-emitting diode (OLED) structure was proposed. The multilayer structure of OLED deposited in the conventional sequence is not on the thin film transistor (TFT) backplane but on the OLED plane. The contact between the indium tin oxide (ITO) electrode of TFT backplane and metal cathode of OLED plane is implemented by using transfer electrode. The stringent pixel design for aperture ratio of the bottom-emitting AMOLED, as well as special technology for the top ITO electrode of top-emitting AMOLED, is unnecessary in the laminated AMOLED.

  2. Cysteine Cathepsins in Human Carious Dentin

    Science.gov (United States)

    Nascimento, F.D.; Minciotti, C.L.; Geraldeli, S.; Carrilho, M.R.; Pashley, D.H.; Tay, F.R.; Nader, H.B.; Salo, T.; Tjäderhane, L.; Tersariol, I.L.S.

    2011-01-01

    Matrix metalloproteinases (MMPs) are important in dentinal caries, and analysis of recent data demonstrates the presence of other collagen-degrading enzymes, cysteine cathepsins, in human dentin. This study aimed to examine the presence, source, and activity of cysteine cathepsins in human caries. Cathepsin B was detected with immunostaining. Saliva and dentin cysteine cathepsin and MMP activities on caries lesions were analyzed spectrofluorometrically. Immunostaining demonstrated stronger cathepsins B in carious than in healthy dentin. In carious dentin, cysteine cathepsin activity increased with increasing depth and age in chronic lesions, but decreased with age in active lesions. MMP activity decreased with age in both active and chronic lesions. Salivary MMP activities were higher in patients with active than chronic lesions and with increasing lesion depth, while cysteine cathepsin activities showed no differences. The results indicate that, along with MMPs, cysteine cathepsins are important, especially in active and deep caries. PMID:21248362

  3. Acemannan, an extracted product from Aloe vera, stimulates dental pulp cell proliferation, differentiation, mineralization, and dentin formation.

    Science.gov (United States)

    Jittapiromsak, Nawaporn; Sahawat, Dusida; Banlunara, Wijit; Sangvanich, Polkit; Thunyakitpisal, Pasutha

    2010-06-01

    This study investigated the effect of acemannan (Aloe vera gel polysaccharide) on dentin formation. Primary human dental pulp cells were treated with acemannan. New DNA synthesis, bone morphogenetic protein-2, alkaline phosphatase activity, dentin sialoprotein expression, and mineralization were determined by [(3)H]-thymidine incorporation, enzyme-linked immunosorbent assay, biochemical assay, western blotting, and Alizarin Red staining, respectively. Then the upper first molars of 24 male Sprague Dawley rats were intentionally exposed and capped with either acemannan or calcium hydroxide. At day 28, the teeth were histopathologically examined and evaluated for the degree of inflammation, dentin bridge formation, and pulp tissue organization. The results revealed that acemannan significantly increased pulp cell proliferation, bone morphogenetic protein-2, alkaline phosphatase activity, dentin sialoprotein expression, and mineralization, compared with the untreated group. The acemannan-treated group also exhibited a complete homogeneous calcified dentin bridge and good pulp tissue organization, whereas neither was detected in the calcium hydroxide-treated and sham groups. In the acemannan-treated group, either mild or no inflammation was found, whereas the other groups had various degrees of inflammation. The data suggest that acemannan promotes dentin formation by stimulating primary human dental pulp cell proliferation, differentiation, extracellular matrix formation, and mineralization. Acemannan also has pulpal biocompatibility and promotes soft tissue organization.

  4. Homogenous demineralized dentin matrix and platelet-rich plasma for bone tissue engineering in cranioplasty of diabetic rabbits: biochemical, radiographic, and histological analysis.

    Science.gov (United States)

    Gomes, M F; Valva, V N; Vieira, E M M; Giannasi, L C; Salgado, M A C; Vilela-Goulart, M G

    2016-02-01

    This study evaluated the effects of homogenous demineralized dentin matrix (HDDM) slices and platelet-rich plasma (PRP) in surgical defects created in the parietal bones of alloxan-induced diabetic rabbits, treated with a guided bone regeneration technique. Biochemical, radiographic, and histological analyses were performed. Sixty adult New Zealand rabbits were divided into five groups of 12: normoglycaemic (control, C), diabetic (D), diabetic with a PTFE membrane (DM), diabetic with a PTFE membrane and HDDM slices (DM-HDDM), and diabetic with PTFE membrane and PRP (DM-PRP). The quantity and quality of bone mass was greatest in the DM-HDDM group (respective radiographic and histological analyses: at 15 days, 71.70 ± 16.50 and 50.80 ± 1.52; 30 days, 62.73 ± 16.51 and 54.20 ± 1.23; 60 days, 63.03 ± 11.04 and 59.91 ± 3.32; 90 days, 103.60 ± 24.86 and 78.99 ± 1.34), followed by the DM-PRP group (respective radiographic and histological analyses: at 15 days 23.00 ± 2.74 and 20.66 ± 7.45; 30 days 31.92 ± 6.06 and 25.31 ± 5.59; 60 days 25.29 ± 16.30 and 46.73 ± 2.07; 90 days 38.10 ± 14.04 and 53.38 ± 9.20). PRP greatly enhanced vascularization during the bone repair process. Abnormal calcium metabolism was statistically significant in the DM-PRP group (P<0.001) for all four time intervals studied, especially when compared to the DM-HDDM group. Alkaline phosphatase activity was significantly higher in the DM-HDDM group (P<0.001) in comparison to the C, D, and DM-PRP groups, confirming the findings of intense osteoblastic activity and increased bone mineralization. Thus, HDDM promoted superior bone architectural microstructure in bone defects in diabetic rabbits due to its effective osteoinductive and osteoconductive activity, whereas PRP stimulated angiogenesis and red bone marrow formation. Copyright © 2015 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

  5. Extracellular matrix assembly and organization during zebrafish gastrulation.

    Science.gov (United States)

    Latimer, Andrew; Jessen, Jason R

    2010-03-01

    Zebrafish gastrulation entails morphogenetic cell movements that shape the body plan and give rise to an embryo with defined anterior-posterior and dorsal-ventral axes. Regulating these cell movements are diverse signaling pathways and proteins including Wnts, Src-family tyrosine kinases, cadherins, and matrix metalloproteinases. While our knowledge of how these proteins impact cell polarity and migration has advanced considerably in the last decade, almost no data exist regarding the organization of extracellular matrix (ECM) during zebrafish gastrulation. Here, we describe for the first time the assembly of a fibronectin (FN) and laminin containing ECM in the early zebrafish embryo. This matrix was first detected at early gastrulation (65% epiboly) in the form of punctae that localize to tissue boundaries separating germ layers from each other and the underlying yolk cell. Fibrillogenesis increased after mid-gastrulation (80% epiboly) coinciding with the period of planar cell polarity pathway-dependent convergence and extension cell movements. We demonstrate that FN fibrils present beneath deep mesodermal cells are aligned in the direction of membrane protrusion formation. Utilizing antisense morpholino oligonucleotides, we further show that knockdown of FN expression causes a convergence and extension defect. Taken together, our data show that similar to amphibian embryos, the formation of ECM in the zebrafish gastrula is a dynamic process that occurs in parallel to at least a portion of the polarized cell behaviors shaping the embryonic body plan. These results provide a framework for uncovering the interrelationship between ECM structure and cellular processes regulating convergence and extension such as directed migration and mediolateral/radial intercalation. 2009 International Society of Matrix Biology. Published by Elsevier B.V. All rights reserved.

  6. Organic matrix composite protective coatings for space applications

    Science.gov (United States)

    Dursch, Harry W.; George, Pete

    1995-01-01

    Successful use of composites in low earth orbit (LEO) depends on their ability to survive long-term exposure to atomic oxygen (AO), ultraviolet radiation, charged particle radiation, thermal cycling, and micrometeoroid and space debris. The AO environment is especially severe for unprotected organic matrix composites surfaces in LEO. Ram facing unprotected graphite/epoxy flown on the 69-month Long Duration Exposure Facility (LDEF) mission lost up to one ply of thickness (5 mils) resulting in decreased mechanical properties. The expected AO fluence of the 30 year Space Station Alpha mission is approximately 20 times that seen on LDEF. This exposure would result in significant material loss of unprotected ram facing organic matrix composites. Several protective coatings for composites were flown on LDEF including anodized aluminum, vacuum deposited coatings, a variety of thermal control coatings, metalized Teflon, and leafing aluminum. Results from the testing and analysis of the coated and uncoated composite specimens flown on LDEF's leading and trailing edges provide the baseline for determining the effectiveness of protectively coated composites in LEO. In addition to LDEF results, results from shuttle flight experiments and ground based testing will be discussed.

  7. The inorganic components of cementum- and enamel-related dentin in the rat incisor.

    Science.gov (United States)

    Steinfort, J; Deblauwe, B M; Beertsen, W

    1990-06-01

    Recently, we have shown that, in rodent incisors, the crown- and root-analogue dentin (enamel- and cementum-related dentin) show differences in mineralization rates (Beertsen and Niehof, 1986) and composition of the organic matrices (Steinfort et al., 1989). It was the aim of the present study to determine whether these differences were accompanied by differences in the inorganic components. Rat incisors were analyzed by means of hardness measurements, microradiography, and the determination of Ca, Mg, and PO4 content. The outer circumpulpal dentin layer of the enamel-related dentin (ERD) was considerably harder and denser than the comparable layer of the cementum-related dentin (CRD). Concomitantly, a higher Ca and PO4 content was found for the ERD than for the CRD, while the reverse occurred with respect to Mg. From the apical end of the incisor toward the incisal edge, the Ca/PO4 ratio tended to decrease for both ERD and CRD, while the Mg/PO4 ratio increased. All differences appeared to be statistically significant. It is concluded that differences in the non-collagenous organic matrix were accompanied by differences in the inorganic components. More specifically, a relatively high content of highly phosphorylated phosphoproteins (ERD) was associated with a higher Ca and a lower Mg content.

  8. Trans-dentinal stimulation of tertiary dentinogenesis.

    Science.gov (United States)

    Smith, A J; Murray, P E; Sloan, A J; Matthews, J B; Zhao, S

    2001-08-01

    Trans-dentinal stimulation of tertiary dentinogenesis has long been recognized, and has traditionally been ascribed to diffusion of irritant substances arising during injury and restorative treatment. Identification of bio-active components, especially growth factors including TGF-beta s, sequestered within dentin matrix provides a new explanation for cellular signaling during tertiary dentinogenesis. Both isolated dentin matrix components and pure growth factors (TGF-beta s) have been shown to signal cellular events leading to reactionary and reparative tertiary dentinogenesis. Release of these bio-active components from dentin matrix may arise during carious attack and other injury to the tissue, and also during subsequent surgical intervention and restoration of the tooth. Both cavity-conditioning agents and leaching from restorative materials may contribute to release of these components. Distance of diffusion, as determined by cavity residual dentin thickness, and other restorative parameters may influence the signaling process after release of these components. Careful consideration of the interplay between tissue injury and surgical and restorative material factors is required for optimum exploitation of the exquisite regenerative capacity of dentin-pulp for more biological approaches to clinical treatment of dental disease.

  9. ON THE STIFFNESS OF DEMINERALIZED DENTIN MATRICES

    Science.gov (United States)

    Ryou, Heonjune; Turco, Gianluca; Breschi, Lorenzo; Tay, Franklin R.; Pashley, David H.; Arola, Dwayne

    2015-01-01

    Resin bonding to dentin requires the use of self-etching primers or acid etching to decalcify the surface and expose a layer of collagen fibrils of the dentin matrix. Acid-etching reduces the stiffness of demineralized dentin from approximately 19 GPa to 1 MPa, requiring that it floats in water to prevent it from collapsing during bonding procedures. Several publications show that crosslinking agents like gluteraladehyde, carbodiimide or grape seed extract can stiffen collagen and improve resin-dentin bond strength. Objective The objective was to assess a new approach for evaluating the changes in stiffness of decalcified dentin by polar solvents and a collagen cross-linker. Methods Fully demineralized dentin beams and sections of etched coronal dentin were subjected to indentation loading using a cylindrical flat indenter in water, and after treatment with ethanol or ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC). The stiffness was measured as a function of strain and as a function of loading rate from 1 to 50 µm/sec. Results At a strain of 0.25% the elastic modulus of the fully demineralized dentin was approximately 0.20 MPa. It increased to over 0.90 MPa at strains of 1%. Exposure to ethanol caused an increase in elastic modulus of up to four times. Increasing the loading rate from 1 to 50 µm/sec caused an increase in the apparent modulus of up to three times in both water and ethanol. EDC treatment caused increases in the stiffness in fully demineralized samples and in acid-etched demineralized dentin surfaces in situ. Significance Changes in the mechanical behavior of demineralized collagen matrices can be measured effectively under hydration via indentation with cylindrical flat indenters. This approach can be used for quantifying the effects of bonding treatments on the properties of decalcified dentin after acid etching, as well as to follow the loss of stiffness over time due to enzymatic degradation. PMID:26747822

  10. Morphological effects of MMPs inhibitors on the dentin bonding

    OpenAIRE

    Li, He; Li, Tianbo; LI, XIUYING; Zhang, Zhimin; Li, Penglian; Li, Zhenling

    2015-01-01

    Matrix metalloproteinases (MMPs) have been studied extensively, and MMP inhibitors have been used as dental pretreatment agents prior to dentin bonding because they reduce collagen fiber degradation and improve bonding strength. However, morphologic characteristics of the collagen network after etching and of the post-adhesive dentin hybrid layers (DHL) after MMP inhibitors pretreatment have not been evaluated. Thus, we investigated demineralized dentin pretreated with chlorhexidine (CHX) and...

  11. Comparison of Demineralized Dentin and Demineralized Freeze Dried Bone as Carriers for Enamel Matrix Proteins in a Rat Critical Size Defect

    Science.gov (United States)

    2005-05-01

    usually requires resorption prior to the formation of new bone. At this early two weeks stage it is possible that there was insufficient time for the... resorptive and formative processes to be completed. At eight weeks the mean RIDIT values for all groups were greater than 0.5, 49 indicating that the...non-collageous proteins of rat incisors dentin. Calcified Tissue Research 1978;25:169-178. Finkelman R., Mohan S., Jennings J., Taylor A., Jepsen S

  12. EFFECT OF DENTIN TUBULES TO THE MECHANICAL PROPERTIES OF DENTIN.PART II:EXPERIMENTAL STUDY

    Institute of Scientific and Technical Information of China (English)

    Huo Bo; Zheng Quanshui; Zhang Qing; Wang Jiade

    2000-01-01

    To verify the theoretical models of varying transversely isotropic stress-strain relations of dentin established in the preceding work(Part I),we perform a set of experiments.Because of the very fine tooth size,it usually seems to be difficult to directly measure the inhomogeneons and anisotropic parameters of dentin.In this paper,by the digital speckle correlation method,tensile experiments are made on the small dentin samples either parallel or perpendicular to the dentin tubules.With the theoretically predicted elastic stress-strain relations,an optimization method is proposed to fit the strain curve adapted to the experimental data.The results show that the theoretical elastic stress-strain relations coincides very well with the experimental observations.The determined Young's modulus and Poisson's ratio of dentin matrix are 29.5GPa and 0.44,respectively,in the optimization sense.

  13. Chemical nature of collagen in the placoid-scale dentine of the blue shark, Prionace glauca L.

    Science.gov (United States)

    Kawaguchi, T

    1985-01-01

    The dentine fraction was obtained from powdered placoid scales by differential density-flotation, and demineralized with 0.5 M EDTA. Monomeric alpha 1 and alpha 2 chains of collagen were extracted from the residual organic matrix, and the two alpha chains purified by chromatography. The two alpha chains were also isolated from shark-skin collagen. The corresponding alpha chains from shark dentine and skin collagens resembled each other closely in chromatographic and electrophoretic behaviour and in their CNBr-peptide maps but differed from calf-skin alpha chains. The differences in the chemical composition between shark dentine and skin were due only to post-translational modification (hydroxylation and phosphorylation), indicating that the collagens are of the same type. The hydroxylation of prolyl and lysyl residues occurred more in the dentine alpha chains than in the skin chains. Among the four alpha chains, the phosphate content was the highest in the alpha 2 chain of the dentine collagen. These differences in hydroxylation and phosphorylation have been observed among alpha chains of mammalian mineralized and unmineralized tissues. The preferential dimerization to form alpha 1-alpha 2, characteristic of shark-skin collagen, was not observed in the dentine collagen. Other dimers were hardly detectable in the latter.

  14. Growth Factor Liberation and DPSC Response Following Dentine Conditioning.

    Science.gov (United States)

    Sadaghiani, L; Gleeson, H B; Youde, S; Waddington, R J; Lynch, C D; Sloan, A J

    2016-10-01

    Liberation of the sequestrated bioactive molecules from dentine by the action of applied dental materials has been proposed as an important mechanism in inducing a dentinogenic response in teeth with viable pulps. Although adhesive restorations and dentine-bonding procedures are routinely practiced, clinical protocols to improve pulp protection and dentine regeneration are not currently driven by biological knowledge. This study investigated the effect of dentine (powder and slice) conditioning by etchants/conditioners relevant to adhesive restorative systems on growth factor solubilization and odontoblast-like cell differentiation of human dental pulp progenitor cells (DPSCs). The agents included ethylenediaminetetraacetic acid (EDTA; 10%, pH 7.2), phosphoric acid (37%, pH EDTA, phosphoric acid, and citric acid from powdered dentine. The dentine matrix extracts were shown to be bioactive, capable of stimulating odontogenic/osteogenic differentiation as observed by gene expression and phenotypic changes in DPSCs cultured in monolayer on plastic. Polyacrylic acid failed to solubilize proteins from powdered dentine and was therefore considered ineffective in triggering a growth factor-mediated response in cells. The study went on to investigate the effect of conditioning dentine slices on growth factor liberation and DPSC behavior. Conditioning by EDTA, phosphoric acid, and citric acid exposed growth factors on dentine and triggered an upregulation in genes associated with mineralized differentiation, osteopontin, and alkaline phosphatase in DPSCs cultured on dentine. The cells demonstrated odontoblast-like appearances with elongated bodies and long extracellular processes extending on dentine surface. However, phosphoric acid-treated dentine appeared strikingly less populated with cells, suggesting a detrimental impact on cell attachment and growth when conditioning by this agent. These findings take crucial steps in informing clinical practice on dentine

  15. A Review of Irradiation Effects on Organic-Matrix Insulation

    Energy Technology Data Exchange (ETDEWEB)

    Simon, N.J.

    1993-06-01

    This review assesses the data base on epoxy and polyimide matrix insulation to determine whether organic electric insulation systems can be used in the toroidal field (TF) magnets of next generation fusion devices such as ITER* and TPX*. Owing to the difficulties of testing insulation under fusion reactor conditions, there is a considerable mismatch between the ITER requirements and the data that are currently available. For example, nearly all of the high-dose (5 x 10{sup 7} to 10{sup 8} Gy) data obtained on epoxy and polyimide matrix insulation employed gamma irradiation, electron irradiation, or reactor irradiation with a fast neutron fluence far below 10{sup 23}/m{sup 2}, the fluence expected for the insulation at the TF magnets, as set forth in ITER conceptual design documents. Also, the neutron spectrum did not contain a very high energy (E {ge} 5 MeV) component. Such data underestimate the actual damage that would be obtained with the neutron fluence and spectrum expected at a TF magnet. Experiments on a polyimide (Kapton) indicate that gamma or electron doses or mixed gamma and neutron reactor doses would have to be downgraded by a factor of up to ten to simulate fusion neutron doses. Even when neutrons did constitute a significant portion of the total dose, B-containing E-glass reinforcement was often used; therefore, excess damage from the {sup 10}B + n {yields} {sup 7}Li + {alpha} reaction occurred near the glass-epoxy interface. This problem can easily be avoided by substituting B-free glass (R, S, or T types).

  16. [Dentin adhesives. An update].

    Science.gov (United States)

    Grandini, R; Novelli, C; Pierleoni, P

    1991-11-01

    Even if mechanical bonding to enamel utilizing the acid-etch technique has been very successful, adhesion to dentin is still a challenge to researchers and clinicians. Dentin is a vital tissue and differs in composition from enamel: acid-etching does not enhance the bond strength of composite resins to dentin and may elicit a severe pulpal response. For an effective bond to occur, a dentin bonding system has to be used. The first generation of methacrylate-based dentin adhesives was capable of chemical bonding to the inorganic phase of dentin. The chemical basis for this resin-dentin adhesive was the interaction between a phosphate group attached to the methacrylate and the calcium ions on the dentin surface. This system yielded rather low bond strengths which were clinically unsatisfying. The second generation of dentin adhesives became available to the profession recently. Each of these new bonding systems use similar chemical composition for the same purpose of bonding with physicochemical interaction to the hard tooth tissues. All these systems contain a mild acid dentin conditioner to remove the smear layer and an aqueous resin containing primer to improve monomer penetration into the hydrophilic dentin surface. The second generation dentin bonding systems are extremely sensitive to variations upon the completeness of instructions and how accurately these are followed by dental practitioners.

  17. Dentin tubule occluding ability of dentin desensitizers.

    Science.gov (United States)

    Han, Linlin; Okiji, Takashi

    2015-04-01

    To compare the dentin tubule-occluding ability of fluoroaluminocalciumsilicate-based (Nanoseal), calcium phosphate-based (Teethmate Desensitizer), resin-containing oxalate (MS Coat ONE) and diamine silver fluoride (Saforide) dentin desensitizers using artificially demineralized bovine dentin. Simulated hypersensitive dentin was created using cervical dentin sections derived from bovine incisors using phosphoric acid etching followed by polishing with a paste containing hydroxyapatite. The test desensitizers were applied in one, two, or three cycles, where each cycle involved desensitizer application, brushing, and immersion in artificial saliva (n= 5 each). The dentin surfaces were examined with scanning electron microscopy, and the dentin tubule occlusion rate was calculated. The elemental composition of the deposits was analyzed with electron probe microanalysis. Data were analyzed by one-way ANOVA and the Tukey honestly significant different test. Marked deposit formation was observed on the specimens treated with Nanoseal or Teethmate Desensitizer, and tags were detected in the specimens' dentin tubules. These findings became more prominent as the number of application cycles increased. The major elemental components of the tags were Ca, F, and Al (Nanoseal) and Ca and P (Teethmate Desensitizer). The tubule occlusion rates of MS Coat ONE and Saforide were significantly lower than those of Nanoseal and Teethmate Desensitizer (P< 0.05).

  18. Invasion of dentinal tubules by oral bacteria.

    Science.gov (United States)

    Love, R M; Jenkinson, H F

    2002-01-01

    Bacterial invasion of dentinal tubules commonly occurs when dentin is exposed following a breach in the integrity of the overlying enamel or cementum. Bacterial products diffuse through the dentinal tubule toward the pulp and evoke inflammatory changes in the pulpo-dentin complex. These may eliminate the bacterial insult and block the route of infection. Unchecked, invasion results in pulpitis and pulp necrosis, infection of the root canal system, and periapical disease. While several hundred bacterial species are known to inhabit the oral cavity, a relatively small and select group of bacteria is involved in the invasion of dentinal tubules and subsequent infection of the root canal space. Gram-positive organisms dominate the tubule microflora in both carious and non-carious dentin. The relatively high numbers of obligate anaerobes present-such as Eubacterium spp., Propionibacterium spp., Bifidobacterium spp., Peptostreptococcus micros, and Veillonella spp.-suggest that the environment favors growth of these bacteria. Gram-negative obligate anaerobic rods, e.g., Porphyromonas spp., are less frequently recovered. Streptococci are among the most commonly identified bacteria that invade dentin. Recent evidence suggests that streptococci may recognize components present within dentinal tubules, such as collagen type I, which stimulate bacterial adhesion and intra-tubular growth. Specific interactions of other oral bacteria with invading streptococci may then facilitate the invasion of dentin by select bacterial groupings. An understanding the mechanisms involved in dentinal tubule invasion by bacteria should allow for the development of new control strategies, such as inhibitory compounds incorporated into oral health care products or dental materials, which would assist in the practice of endodontics.

  19. Primum non nocere - The effects of sodium hypochlorite on dentin as used in endodontics.

    Science.gov (United States)

    Gu, Li-Sha; Huang, Xue-Qing; Griffin, Brandon; Bergeron, Brian R; Pashley, David H; Niu, Li-Na; Tay, Franklin R

    2017-10-01

    The medical literature is replete with the maxim 'primum non nocere', cautioning health care providers to avoid doing any harm to human subjects in their delivery of medical care. Sodium hypochlorite (NaOCl) is a well-established irrigant for root canal treatment because of its antimicrobial and organic tissue remnant dissolution capability. However, little is known about the deleterious effect of this strong oxidizing agent on the integrity of human mineralized dentin. Iatrogenically-induced loss of dentin integrity may precipitate post-treatment root fracture and has potential medico-legal complications. In the present work, transmission electron microscopy provided evidence for collagen destruction in the surface/subsurface of dentin treated with high NaOCl concentrations and long contact times. Size exclusion chromatography showed that the hypochlorite anion, because of its small size, penetrated the water compartments of apatite-encapsulated collagen fibrils, degraded the collagen molecules and produced a 25-35µm thick, non-uniform "ghost mineral layer" with enlarged, coalesced dentinal tubules and their lateral branches. Fourier transform-infrared spectroscopy identified increases in apatite/collagen ratio in NaOCl-treated dentin. The apatite-rich, collagen-sparse dentin matrix that remained after NaOCl treatment is more brittle, as shown by the reductions in flexural strength. Understanding the deleterious effects of NaOCl on mineralized dentin enables one to balance the risks and benefits in using high NaOCl concentrations for lengthy periods in root canal debridement. Delineating the mechanism responsible for such a phenomenon enables high molecular weight, polymeric antimicrobial and tissue dissolution irrigants to be designed that abides by the maxim of 'primum non nocere' in contemporary medical practices. The antimicrobial and tissue-dissolution capacities of NaOCl render it a well-accepted agent for root canal debridement. These highly desirable

  20. Interactions of dentine desensitisers with human dentine: morphology and composition.

    Science.gov (United States)

    Eliades, George; Mantzourani, Maria; Labella, Roberto; Mutti, Bruna; Sharma, Deepak

    2013-07-01

    To evaluate the effect of desensitising agents on human dentine morphology and composition. Randomly assigned human coronal-dentine specimens were subjected to: (a) no treatment (smear-layer control, n=4); (b) acid etching with 6% citric acid (demineralised control, n=4); (c) treatment with desensitising agents (12 cycles of 60 s treatment with 60 s between-treatment rinsing, n=6 per agent); and (d) exposure to acidic challenge (pH 5.0 for 90 s, n=6 per agent). The tested products were: Listerine® Advanced Defence Sensitive (LADS; 1.4% potassium oxalate) mouthrinse, Colgate® Sensitive Pro-Relief™ mouthrinse, and toothpaste slurries (paste/water 1:2 wt/wt ratio) of Colgate® Sensitive Pro-Relief™ paste, Crest® Sensitive paste and Sensodyne® Repair and Protect paste. All dentine surfaces were studied by attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy, Raman microscopy and high vacuum scanning electron microscopy with energy-dispersive X-ray microanalysis (HV-SEM/EDX). Desensitising slurry treatments occluded tubule orifices of acid-etched dentine, creating a randomly distributed surface pattern of particle aggregates. The greatest intratubular penetration of occluding particles was found in dentine treated with LADS. The atomic ratios of Ca/N and Ca/P, and the mineral/matrix ratios increased after toothpaste-slurry treatments compared with the acid-etched dentine. However, the acidic challenge removed most surface precipitates and further demineralised these substrates. Before the acidic challenge, the surface features were least affected in specimens treated with Sensodyne® Repair and Protect. After the acidic challenge, the sub-surface occlusion features were least affected in specimens treated with LADS. Although most tested products achieved occlusion of dentinal tubules and provided evidence of mineral deposits, the deposit formed by LADS demonstrated the greatest resistance to acidic challenge, which simulates intra

  1. Mapping of the human dentin matrix acidic phosphoprotein gene (DMP1) to the dentinogenesis imperfecta type II critical region at chromosome 4q21

    Energy Technology Data Exchange (ETDEWEB)

    Aplin, H.M.; Hirst, K.L.; Crosby, A.H.; Dixon, M.J. [Univ. of Manchester (United Kingdom)

    1995-11-20

    Dentinogenesis imperfecta type II (DGI1) is an autosomal dominant disorder of dentin formation, which has been mapped to human chromosome 4q12-q21. The region most likely to contain the DGI1 locus is a 3.2-cM region surrounding the osteopontin (SPP1) locus. Recently, a novel dentin-specific acidic phosphoprotein (dmp1) has been cloned in the rat and mapped to mouse chromosome 5q21. In the current investigation, we have isolated a cosmid containing the human DMP1 gene. The isolation of a short tandem repeat polymorphism at this locus has allowed us to map the DMP1 locus to human chromosome 4q21 and demonstrate that it is tightly linked to DGI1 in two families (Z{sub max} = 11.01, {theta} = 0.001). The creation of a yeast artificial chromosome contig around SPP1 has further allowed us to demonstrate that DMP1 is located within 150 kb of the bone sialoprotein and 490 kb of the SPP1 loci, respectively. DMP1 is therefore a strong candidate for the DGI1 locus. 12 refs., 2 figs., 1 tab.

  2. Coral biomineralization: A focus on intra-skeletal organic matrix and calcification.

    Science.gov (United States)

    Falini, Giuseppe; Fermani, Simona; Goffredo, Stefano

    2015-10-01

    In the recent years several papers and some reviews have dealt with characterization, localization and influence on the precipitation of calcium carbonate, of the organic matrix from scleractinian corals. In fact, it has been well established that coral calcification is a biological controlled process orchestrated in space and time by the organism also trough the secretion of organic matrix molecules because it has been well established that coral calcification is a biological controlled process, and thus is orchestrated in space and time by the organism also through the secretion of organic matrix molecules. In this review is presented a scientific path on the biomineralization of corals having as focusing point the intra-skeletal organic matrix, the molecules that are associated with mineral (aragonite). The review starts with a an overview on coral tissue, skeleton and tissue skeleton interface, describes the intra-skeletal organic matrix putting attention mainly on the proteins associated to aragonite and finally describes the in vivo and in vitro calcium carbonate precipitation experiments carried out aimed to evaluate the role of the organic matrix. The last paragraph reports studies on the role of the organic matrix in controlling calcification when corals are subject ocean acidification effects. The readers are expected to find a source of inspiration for new studies on the biomineralization of corals that are organic matrix addressed and merge diverse scientific disciplines. Copyright © 2015 Elsevier Ltd. All rights reserved.

  3. Can Caries-Affected Dentin be Completely Remine-ralized by Guided Tissue Remineralization?

    Directory of Open Access Journals (Sweden)

    Jing Mao

    2010-09-01

    Full Text Available Introduction: To date, there is no evidence that conventional remineralization techniques us-ing calcium and phosphate ion-containing media will completely remineralize carious lesions in regions where remnant apatite seed crystallites are absent. Conversely, guided tissue remineralization using biomimetic analogs of dentin matrix proteins is successful in remineralizing thin layers of completely demineralized dentin. The hypothesis: Conventional remineralization strategy depends on epitaxial growth over existing apatite crystallites. If there are no or few crystallites, there will be no remineralization. Guided tissue remineralization uses biomimetic analogs of dentin matrix proteins to introduce sequestered amorphous calcium phosphate nanoprecur-sors into the internal water compartments of collagen fibrils. Attachment of templating analogs of matrix phosphoproteins to the colla-gen fibrils further guided the nucleation and growth of apatite crystallites within the fibril. Such a strategy is independent of apatite seed crystallites. Our hypothesis is that 250-300 microns thick artificial carious lesions can be completely remineralized in vitro by guide tissue remineralization but not by conventional remineralization techniques.Evaluation of the hypothesis: Validation of the hypothesis will address the critical barrier to progress in remineralization of caries-affected dentin and shift existing paradigms by providing a novel method of remineralization based on a nanotechnology-based bottom-up approach. This will also generate important information to support the translation of the proof-of-concept biomimetic strategy into a clinically-relevant delivery system for remineralizing caries-affected dentin created by micro-organisms in the oral cavity.

  4. Increased expression of matrix metalloproteinases in the murine zymosan-induced multiple organ dysfunction syndrome.

    NARCIS (Netherlands)

    Volman, T.J.H.; Goris, R.J.A.; Lomme, R.M.L.M.; Groot, J. de; Verhofstad, A.A.J.; Hendriks, T.

    2004-01-01

    Matrix metalloproteinases (MMPs) have been implicated as mediators of tissue damage in several inflammatory diseases. Since the multiple organ dysfunction syndrome (MODS) is thought to result from systemic inflammation, overactivation of MMPs could contribute to the organ damage observed. The

  5. A novel type of developmental dentin defect.

    Science.gov (United States)

    Lukinmaa, P L; Waltimo, J; Hölttä, P; Risteli, L; Risteli, J; Alaluusua, S

    1996-01-01

    We describe a developmental dentin disorder distinct from dentin defects characterized thus far. The proband was a 9-year-old boy who was the only family member known to be affected in five generations. The dental defect was not associated with any general disease or developmental disorder. The teeth appeared normal with the exception of the pink hue seen in some primary teeth. Radiographs showed pathological resorption of primary teeth and abnormally shaped pulp chambers and denticles in permanent teeth. Root canals were wide in developing teeth, but appeared thin in erupted teeth. Histological examination of two primary molars revealed canal-like defects in dentin. In the crown, the canals appeared as clusters, which alternated with columns of normal tubular dentin, and in the virtually atubular root dentin they were haphazardly distributed. Scanning electron microscopic examination confirmed the distribution pattern of the canals. In transmission electron microscopy, the defects were found to contain symmetrically banded, segmental collagenous structures. The canal contents immunostained with antibodies to the N-terminal propeptide of type I procollagen, suggesting retention of the propeptide extension in type I collagen. Whereas type III collagen reactivity was barely detectable in the canal region, staining for type V collagen and the non-fibril-forming type VI collagen was strong. The findings imply that the pathogenesis of the defect could be related to a local failure of odontoblasts to produce normal dentin matrix.

  6. New perspectives about molecular arrangement of primary and permanent dentin

    Energy Technology Data Exchange (ETDEWEB)

    Sanches Borges, Ana Flavia [Department of Dental Materials at Piracicaba Dental School, State University of Campinas, Piracicaba, SP (Brazil); Andrade Bitar, Renata [Biomedical Engineering, Valley of Paraiba University (UNIVAP) (Brazil); Kantovitz, Kamila Rosamilia [Department of Pediatric Dentistry at Piracicaba Dental School, State University of Campinas, Piracicaba, SP (Brazil); Bortollazo Correr, Americo [Department of Dental Materials at Piracicaba Dental School, State University of Campinas, Piracicaba, SP (Brazil); Martin, Airton Abrahao [Biomedical Engineering Post Graduation, Valley of Paraiba University (UNIVAP) (Brazil); Puppin-Rontani, Regina Maria [Department of Pediatric Dentistry at Piracicaba Dental School, State University of Campinas, Piracicaba, SP (Brazil)], E-mail: rmpuppin@fop.unicamp.br

    2007-12-30

    The dentin quality of primary and permanent teeth was inspected by Fourier transformed Raman spectroscopy (FT-Raman); scanning electron microscopy/energy-dispersive spectroscopy (SEM/EDS) and hardness test. Middle dentin of crowns were reached by carbide bur abrading providing a uniform smear layer. Phosphoric acid was applied in order to simulate the etching of total etching adhesive systems. The groups were (n = 10): G1 (primary dentin smear layer); G2 (35% phosphoric acid etched primary dentin); G3 (permanent dentin smear layer); G4 (35% phosphoric acid etched permanent dentin). FT-Raman results were subjected to cluster analysis. SEM/EDS were made in order to add the data obtained by FT-Raman. The hardness data were subjected to ANOVA and Tukey test. FT-Raman showed differences among groups, either to organic or inorganic content. For the organic content, primary and permanent dentin became similar after the etching; conversely, the inorganic content showed differences for the two substrates. Hardness test showed no significant differences between primary and permanent dentin, before or after etching, but the etching decreased these values. The mineral content arrangement of primary dentin is different from permanent dentin, independently of the etching. The substrate type did no influence the hardness, but the etching decreased it.

  7. Stage-structured matrix models for organisms with non-geometric development times

    Science.gov (United States)

    Andrew Birt; Richard M. Feldman; David M. Cairns; Robert N. Coulson; Maria Tchakerian; Weimin Xi; James M. Guldin

    2009-01-01

    Matrix models have been used to model population growth of organisms for many decades. They are popular because of both their conceptual simplicity and their computational efficiency. For some types of organisms they are relatively accurate in predicting population growth; however, for others the matrix approach does not adequately model...

  8. Designing matrix organizations that work: Lessons from the P&G case

    Directory of Open Access Journals (Sweden)

    Ronald Jean Degen

    2010-08-01

    Full Text Available The matrix organization concept emerged from the US aerospace industry in the 1960s and was adopted by many companies in the early 1970s. In the late 1970s and early 1980s many companies were experiencing trouble with its operation and many argued like Peters & Waterman in their bestseller In search of excellence in 1982 (p. 306 that the matrix was too complex to work properly. Galbraith (2009, p. 10-14 explains that the reason for the problems were that the matrix in these organizations was wrongly adopted, hastily installed, and inappropriately implemented. He explains that adopting a matrix structure requires a collaborative organization form, proper power, and accountability distribution, complementing changes to the information systems, planning and budgeting process, the performance evaluation and bonus system, and so on. The purpose of this paper is to illustrate why companies adopted the matrix, what problems they had, the solutions for these problems based on Galbraith (2009 and other authors like Davis & Lawrence (1977, and the state of the art of matrix structure design today like the P&G front-back hybrid matrix organization. To illustrate the historical evolution of organization structure to the simple matrix and then to more complex matrix organizations we used the P&G case (Piskorski & Spadini 2007.

  9. Self-etching adhesives increase collagenolytic activity in radicular dentin.

    Science.gov (United States)

    Tay, Franklin R; Pashley, David H; Loushine, Robert J; Weller, R Norman; Monticelli, Francesca; Osorio, Raquel

    2006-09-01

    Endogenous matrix metalloproteinases (MMPs) release from crown dentin and their activation results in degradation of hybrid layers created by dentin adhesives. This study tested the hypothesis that instrumented intraradicular dentin possesses latent collagenolytic activity that is activated by mild self-etching adhesives. Root dentin shavings were produced from 50 cleaned and shaped, saline-irrigated root canals using Gates Glidden drills and rinsed with sodium azide to prevent bacterial growth. Dried dentin powder aliquots were treated with two clinically-relevant MMP inhibitors, 2% chlorhexidine for 10 minutes and 17% EDTA for 1 minute. Additional dentin powder was mixed with Clearfil Liner Bond 2V or Clearfil Tri-S Bond for 1 minute followed by extracting the adhesives with acetone. Dentin powder was also treated with 2% chlorhexidine for 10 minutes before or after adhesive application. Collagenolytic activities of the nine groups were assayed with a fluorometer in 96-well plates, by recording the changes in fluorescence before and after addition of fluorescein-labeled type I collagen. Epoxy resin-embedded powders were examined with TEM for the extent of demineralization. Instrumented, mineralized intraradicular dentin possessed low but detectable collagenolytic activity that was inhibited by chlorhexidine (p dentin powder and activated latent MMPs, with 14- to 15-fold increases in collagenolytic activities (p MMPs without denaturing these enzymes, and may adversely affect the longevity of bonded root canal fillings and posts.

  10. Active Matrix Organic Light Emitting Diode (AMOLED) Environmental Test Report

    Science.gov (United States)

    Salazar, George A.

    2013-01-01

    This report focuses on the limited environmental testing of the AMOLED display performed as an engineering evaluation by The NASA Johnson Space Center (JSC)-specifically. EMI. Thermal Vac, and radiation tests. The AMOLED display is an active-matrix Organic Light Emitting Diode (OLED) technology. The testing provided an initial understanding of the technology and its suitability for space applications. Relative to light emitting diode (LED) displays or liquid crystal displays (LCDs), AMOLED displays provide a superior viewing experience even though they are much lighter and smaller, produce higher contrast ratio and richer colors, and require less power to operate than LCDs. However, AMOLED technology has not been demonstrated in a space environment. Therefore, some risks with the technology must be addressed before they can be seriously considered for human spaceflight. The environmental tests provided preliminary performance data on the ability of the display technology to handle some of the simulated induced space/spacecraft environments that an AMOLED display will see during a spacecraft certification test program. This engineering evaluation is part of a Space Act Agreement (SM) between The NASA/JSC and Honeywell International (HI) as a collaborative effort to evaluate the potential use of AMOLED technology for future human spaceflight missions- both government-led and commercial. Under this SM, HI is responsible for doing optical performance evaluation, as well as temperature and touch screen studies. The NASA/JSC is responsible for performing environmental testing comprised of EMI, Thermal Vac, and radiation tests. Additionally, as part of the testing, limited optical data was acquired to assess performance as the display was subjected to the induced environments. The NASA will benefit from this engineering evaluation by understanding AMOLED suitability for future use in space as well as becoming a smarter buyer (or developer) of the technology. HI benefits

  11. RT-MATRIX: Measuring Total Organic Carbon by Photocatalytic Oxidation of Volatile Organic Compounds

    Science.gov (United States)

    2008-01-01

    Volatile organic compounds (VOCs) inevitably accumulate in enclosed habitats such as the International Space Station and the Crew Exploration Vehicle (CEV) as a result of human metabolism, material off-gassing, and leaking equipment. Some VOCs can negatively affect the quality of the crew's life, health, and performance; and consequently, the success of the mission. Air quality must be closely monitored to ensure a safe living and working environment. Currently, there is no reliable air quality monitoring system that meets NASA's stringent requirements for power, mass, volume, or performance. The ultimate objective of the project -- the development of a Real-Time, Miniaturized, Autonomous Total Risk Indicator System (RT.MATRIX).is to provide a portable, dual-function sensing system that simultaneously determines total organic carbon (TOC) and individual contaminants in air streams.

  12. Complexity of matrix organization and problems caused by its inadequate implementation

    Directory of Open Access Journals (Sweden)

    Janićijević Nebojša

    2007-01-01

    Full Text Available Matrix organization model is a sophisticated structure intended to combine both the efficiency and effectiveness of the functional and the product/service/customer/area dimensions. From the moment it was introduced in practice, this organizational architecture was accepted with enthusiasm, because it represented a complex organizational response adequate to the conditions which most of the companies in the world have been facing since 1970s. Although matrix organization is not a novelty, it is still a controversial model of organization design. The aim of this paper is to provide a deeper insight into the causes and effects of organizational misfits which appear in the implementation phase of three-dimensional matrix organization, as well as to offer some practical recommendations for managers on how to improve their capacities for successful management of complex matrix organization architecture in their organizations.

  13. Syndecans as receptors and organizers of the extracellular matrix

    DEFF Research Database (Denmark)

    Xian, Xiaojie; Gopal, Sandeep; Couchman, John

    2009-01-01

    and signalling molecules, such as protein kinases. Some aspects of syndecan signalling are understood but much remains to be learned. The functions of syndecans in regulating cell adhesion and extracellular matrix assembly are described here. Evidence from null mice suggests that syndecans have roles......, the collagens and glycoproteins of the extracellular matrix are prominent. Frequently, they do so in conjunction with other receptors, most notably the integrins. For this reason, they are often referred to as "co-receptors". However, just as with integrins, syndecans can interact with actin-associated proteins...

  14. Inhibition of dentin collagen degradation by hesperidin: an in situ study

    NARCIS (Netherlands)

    van Strijp, A.J.P.; Takatsuka, T.; Sono, R.; Iijima, Y.

    2015-01-01

    Dentine caries is a process of demineralization and subsequent degradation of the collagenous matrix. Host-derived proteolytic enzymes, such as matrix metalloproteinases (MMPs), play a role in this process of dentine collagen degradation. Hampering this degradation retards the caries process. Dietar

  15. University Organization. A Matrix Analysis of the Academic Professions.

    Science.gov (United States)

    Bess, James L.

    Using the latest research instruments, including questionnaires, interviews, factor analysis, and matrix construction, the present restraints on professorial effectiveness and the contributions of departmental and university structures to professorial malaise is examined for the purpose of improving ways that administrators can increase faculty…

  16. [Study of hard mineralized tissues effect of calcium-deficient diets with and without cholecalciferol supplementation on the incisor dentine of rats].

    Science.gov (United States)

    Hatano, M; Takada, H; Fuda, H; Watanabe, Y; Ikeda, K; Hasegawa, H

    1989-01-01

    It has been known that both tooth and bone have an apatite structure similar to that of mineral hydroxyapatite. The apatite crystal in living tissues of tooth and bone generally is constructed from submicrocrystals and has many impurities. It seems that chemical and physical aspects of resistance of hard tissues depend on the diet. Consequently, the matrix of organic, free radicals in X-ray irradiated hard tissues were studied by means of electron spin resonance (ESR). The effects of calcium-deficient diets with and without cholecalciferol supplementation on the incisor dentine of rats were examined by the rate of decay of organic, free fadicals in X-ray irradiated incisor dentine of rats. The crystal size of incisor dentine became smaller in case of calcium contained diet.

  17. Effects of demineralized dentin matrix on the odontogenic differentiation potential of bone marrow mesenchymal stem cells in vitro%脱矿牙本质基质诱导骨髓间充质干细胞向成牙本质样细胞分化的体外实验研究

    Institute of Scientific and Technical Information of China (English)

    张红梅; 张晓梅; 闫志伟; 王江; 荀文兴; 李蓉; 庞楠; 杨海珍; 金岩

    2011-01-01

    AIM; To observe the adhesion and growth of rat bone marrow mesenehymal stem ceils (rBMSCs)seeded on demineralized dentin matrix (DDM) in vitro and the odontogenic induction of DDM. METHODS; BMSCs were successfully isolated and cultured. The compatibility of the biomaterial was evaluated by MTT assay. The odontogenic differentiation of BMSCs induced by DDM was measured using Alizarin red staining, the alkaline phosphatase (ALP) activity and reverse transcription-polymerase chain reaction (RT-PCR) assay. RESULTS; The proliferation of BMSCs in DDM groups was obviously higher than that in the control groups. The higher levels of ALP activity and larger mineralizing nodes were also detected in the experiment groups. RT-PCR demonstrated mRNA expression of dentin sialophospho-protein ( DSPP ) and dentin matrix proteinl ( DMP-1) in BMSCs induced by DDM. CONCLUSION; DDM possesses a good cellular compatibility with BMSCs. It can induce the odontogenic differentiation of BMSCs.%目的:观察脱矿牙本质基质(demineralized dentin matrix,DDM)与大鼠骨髓间充质干细胞(rat bone marrow mesenehymal stem ceils,rBMSCs)的生物相容性及其作为支架材料对BMSCs的牙向诱导作用.方法:分离培养BMSCs,分别用四唑盐比色法(MTS)、茜素红染色法、碱性磷酸酶(alkaline phosphatase,ALP)和逆转录聚合酶链式反应(reverse transcription-polymerase chain reaction,RT-PCR)方法观察DDM生物材料对BMSCs增殖活性和牙向分化能力的影响.结果:DDM能显著促进体外培养的BMSCs的增殖、诱导细胞的矿化和提高细胞ALP活性;同时还能诱导BMSCs在mRNA水平表达牙本质涎磷蛋白(dentin sialophosphoprotein,DSPP)和牙本质基质蛋白(dentin matrix proteinl,DMP-1).结论:体外培养条件下,DDM与BMSCs有良好的生物相容性,能够诱导BMSCs牙向分化.

  18. Effects of demineralized dentin matrix on proliferation and odontogenic differentiation of human dental pulp stem cells in vitro%脱矿牙本质基质对人牙髓干细胞体外增殖、牙向分化能力的影响

    Institute of Scientific and Technical Information of China (English)

    张红梅; 金岩; 王永刚; 张晓梅; 谭家莉; 荀文兴; 杨海珍; 李蓉; 庞楠; 曾光

    2012-01-01

    目的 观察脱矿牙本质基质(demineralized dentin matrix,DDM)与人牙髓干细胞(human dental pulp stem cells,hDP-SCs)的生物相容性及其作为支架材料的牙向诱导作用.方法 体外分离培养DPSCs,分别用四唑盐比色法(MTS)、茜素红染色法、碱性磷酸酶(alkaline phosphatase,ALP)和逆转录聚合酶链式反应(reverse transcription- polymerase chain reaction,RTPCR)方法观察DDM生物材料对DPSCs增殖活性和牙向分化能力的影响.结果 DDM显著地刺激体外培养的DPSCs增殖,诱导了细胞的矿化和提高细胞ALP活性.RT- PCR结果显示DDM诱导后细胞mRNA水平表达牙本质涎磷蛋白(dentin sialophosphoprotein,DSPP)和牙本质基质蛋白(dentin matrix protein1,DMP -1).结论 体外培养条件下,DDM与DPSCs有良好的生物相容性,作为支架材料对于DPSCs有较好牙向诱导作用.%Objective To observe the adhesion and growth of human dental pulp stem cells seeded on demineralized dentin matrix ( DDM) in vitro and the adontogenic induction of DOM. Methods OPSCs were successfully isolated and cultured. The compatibility of the biomaterial was evaluated by MTS assay. The odontogenic differentiation of DPSCs induced by DDM was measured using Alizarin red staining, the alkaline phosphatase (ALP) activity and reverse transcription-polymerase chain reaction (RT-PCR) assay. Results The proliferation of DPSCs in DDM groups was obviously higher than that in the control groups. The higher levels of ALP activity and larger mineralizing nods were also detected in the experimental groups. RT-PCR demonstrated mRNA expression of dentin sialophosphoprotein ( DSPP ) and dentin matrix protein 1 (DMP-1) in DPSCs induced by DDM. Conclusions DDM possesses a good cellular compatibility with DPSCs, As an engineering scaffold.it can induce the odontogenic differentiation of DPSCs.

  19. Organic thin-film transistor arrays for active-matrix organic light emitting diode

    Science.gov (United States)

    Lee, Sangyun; Moon, Hyunsik; Kim, Do H.; Koo, Bon-Won; Jeong, Eun-Jeong; Lee, Bang-Lin; Kim, Joo-Young; Lee, Eunkyung; Hahn, Kook-Min; Han, Jeong-Seok; Park, Jung-Il; Seon, Jong-Baek; Kim, Jung-Woo; Chun, Young-Tea; Kim, Sangyeol; Kang, Sung K.

    2007-09-01

    We developed an active matrix organic light-emitting diodes (AMOLEDs) on a glass using two organic thin-film transistors (OTFTs) and a capacitor in a pixel. OTFTs switching-arrays with 64 scan lines and 64 (RGB) data lines were designed and fabricated to drive OLED arrays. In this study, OTFT devices have bottom contact structures with an ink-jet printed polymer semiconductor and an organic insulator as a gate dielectric. The width and length of the switching OTFT is 500μm and 10μm, respectively and the driving OTFT has 900μm channel width with the same channel length. The characteristics of the OTFTs were examined using test cells around display area. On/off ratio, mobility, on-current of switching OTFT and on-current of driving OTFT were 10 6, 0.1 cm2/V-sec, order of 8μA and over 70 μA respectively. These properties were enough to drive the AMOLEDs over 60 Hz frame rate. AMOLEDs composed of the OTFT switching arrays and OLEDs made by deposition of small molecule materials were fabricated and driven to make moving images, successfully.

  20. Potential Role of Dentin Sialoprotein by Inducing Dental Pulp Mesenchymal Stem Cell Differentiation and Mineralization for Dental Tissue Repair

    OpenAIRE

    Zhi Chen; Shuo Chen; Li-An Wu; Guo-Hua Yuan; Guo-Bin Yang

    2010-01-01

    Introduction: Dentin sialoprotein (DSP) is a dentin extracellular matrix protein, a unique marker of dentinogenesis and plays a vital role in odontoblast differentiation and dentin mineralization. Recently, studies have shown that DSP induces differentiation and mineralization of periodontal ligament stem cells and dental papilla mesenchymal cells in vitro and rescues dentin deficiency and increases enamel mineralization in animal models.The hypothesis: DSP as a nature therapeutic agent stimu...

  1. Predicting partitioning of volatile organic compounds from air into plant cuticular matrix by quantum chemical descriptors

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Based on theoretical linear solvation energy relationship and quantum chemical descriptors computed by AM1 Hamiltonian, a new model is developed to predict the partitioning of some volatile organic compounds between the plant cuticular matrix and air.

  2. Intermediate-band photosensitive device with quantum dots having tunneling barrier embedded in organic matrix

    Science.gov (United States)

    Forrest, Stephen R.

    2008-08-19

    A plurality of quantum dots each have a shell. The quantum dots are embedded in an organic matrix. At least the quantum dots and the organic matrix are photoconductive semiconductors. The shell of each quantum dot is arranged as a tunneling barrier to require a charge carrier (an electron or a hole) at a base of the tunneling barrier in the organic matrix to perform quantum mechanical tunneling to reach the respective quantum dot. A first quantum state in each quantum dot is between a lowest unoccupied molecular orbital (LUMO) and a highest occupied molecular orbital (HOMO) of the organic matrix. Wave functions of the first quantum state of the plurality of quantum dots may overlap to form an intermediate band.

  3. The Difference of Structural State and Deformation Behavior between Teenage and Mature Human Dentin.

    Science.gov (United States)

    Panfilov, Peter; Zaytsev, Dmitry; Antonova, Olga V; Alpatova, Victoria; Kiselnikova, Larissa P

    2016-01-01

    Objective. The cause of considerable elasticity and plasticity of human dentin is discussed in the relationship with its microstructure. Methods. Structural state of teenage and mature human dentin is examined by using XRD and TEM techniques, and their deformation behavior under compression is studied as well. Result. XRD study has shown that crystallographic type of calcium hydroxyapatite in human dentin (calcium hydrogen phosphate hydroxide Ca9HPO4(PO4)5OH; Space Group P63/m (176); a = 9,441 A; c = 6,881 A; c/a = 0,729; Crystallite (Scherrer) 200 A) is the same for these age groups. In both cases, dentin matrix is X-ray amorphous. According to TEM examination, there are amorphous and ultrafine grain phases in teenage and mature dentin. Mature dentin is stronger on about 20% than teenage dentin, while teenage dentin is more elastic on about 20% but is less plastic on about 15% than mature dentin. Conclusion. The amorphous phase is dominant in teenage dentin, whereas the ultrafine grain phase becomes dominant in mature dentin. Mechanical properties of human dentin under compression depend on its structural state, too.

  4. The Difference of Structural State and Deformation Behavior between Teenage and Mature Human Dentin

    Directory of Open Access Journals (Sweden)

    Peter Panfilov

    2016-01-01

    Full Text Available Objective. The cause of considerable elasticity and plasticity of human dentin is discussed in the relationship with its microstructure. Methods. Structural state of teenage and mature human dentin is examined by using XRD and TEM techniques, and their deformation behavior under compression is studied as well. Result. XRD study has shown that crystallographic type of calcium hydroxyapatite in human dentin (calcium hydrogen phosphate hydroxide Ca9HPO4(PO45OH; Space Group P63/m (176; a = 9,441 A; c = 6,881 A; c/a = 0,729; Crystallite (Scherrer 200 A is the same for these age groups. In both cases, dentin matrix is X-ray amorphous. According to TEM examination, there are amorphous and ultrafine grain phases in teenage and mature dentin. Mature dentin is stronger on about 20% than teenage dentin, while teenage dentin is more elastic on about 20% but is less plastic on about 15% than mature dentin. Conclusion. The amorphous phase is dominant in teenage dentin, whereas the ultrafine grain phase becomes dominant in mature dentin. Mechanical properties of human dentin under compression depend on its structural state, too.

  5. Dentin sialoprotein and dentin phosphoprotein overexpression during amelogenesis.

    Science.gov (United States)

    Paine, Michael L; Luo, Wen; Wang, Hong-Jun; Bringas, Pablo; Ngan, Amanda Y W; Miklus, Vetea G; Zhu, Dan-Hong; MacDougall, Mary; White, Shane N; Snead, Malcolm L

    2005-09-09

    The gene for dentin sialophosphoprotein produces a single protein that is post-translationally modified to generate two distinct extracellular proteins: dentin sialoprotein and dentin phosphoprotein. In teeth, dentin sialophosphoprotein is expressed primarily by odontoblast cells, but is also transiently expressed by presecretory ameloblasts. Because of this expression profile it appears that dentin sialophosphoprotein contributes to the early events of amelogenesis, and in particular to those events that result in the formation of the dentino-enamel junction and the adjacent "aprismatic" enamel. Using a transgenic animal approach we have extended dentin sialoprotein or dentin phosphoprotein expression throughout the developmental stages of amelogenesis. Overexpression of dentin sialoprotein results in an increased rate of enamel mineralization, however, the enamel morphology is not significantly altered. In wild-type animals, the inclusion of dentin sialoprotein in the forming aprismatic enamel may account for its increased hardness properties, when compared with bulk enamel. In contrast, the overexpression of dentin phosphoprotein creates "pitted" and "chalky" enamel of non-uniform thickness that is more prone to wear. Disruptions to the prismatic enamel structure are also a characteristic of the dentin phosphoprotein overexpressing animals. These data support the previous suggestion that dentin sialoprotein and dentin phosphoprotein have distinct functions related to tooth formation, and that the dentino-enamel junction should be viewed as a unique transition zone between enamel and the underlying dentin. These results support the notion that the dentin proteins expressed by presecretory ameloblasts contribute to the unique properties of the dentino-enamel junction.

  6. Role of Dentin MMPs in Caries Progression and Bond Stability

    Science.gov (United States)

    Mazzoni, A.; Tjäderhane, L.; Checchi, V.; Di Lenarda, R.; Salo, T.; Tay, F.R.; Pashley, D.H.

    2015-01-01

    Dentin can be described as a biological composite with collagen matrix embedded with nanosized hydroxyapatite mineral crystallites. Matrix metalloproteinases (MMPs) and cysteine cathepsins are families of endopeptidases. Enzymes of both families are present in dentin and collectively capable of degrading virtually all extracellular matrix components. This review describes these enzymes and their presence in dentin, mainly focusing on their role in dentin caries pathogenesis and loss of collagen in the adhesive hybrid layer under composite restorations. MMPs and cysteine cathepsins present in saliva, mineralized dentin, and/or dentinal fluid may affect the dentin caries process at the early phases of demineralization. Changes in collagen and noncollagenous protein structure may participate in observed decreases in mechanical properties of caries-affected dentin and reduce the ability of caries-affected dentin to remineralize. These endogenous enzymes also remain entrapped within the hybrid layer during the resin infiltration process, and the acidic bonding agents themselves (irrespective of whether they are etch-and-rinse or self-etch) can activate these endogenous protease proforms. Since resin impregnation is frequently incomplete, denuded collagen matrices associated with free water (which serves as a collagen cleavage reagent for these endogenous hydrolase enzymes) can be enzymatically disrupted, finally contributing to the degradation of the hybrid layer. There are multiple in vitro and in vivo reports showing that the longevity of the adhesive interface is increased when nonspecific enzyme-inhibiting strategies are used. Different chemicals (i.e., chlorhexidine, galardin, and benzalkonium chloride) or collagen cross-linker agents have been successfully employed as therapeutic primers in the bonding procedure. In addition, the incorporation of enzyme inhibitors (i.e., quaternary ammonium methacrylates) into the resin blends has been recently promoted. This

  7. Role of dentin MMPs in caries progression and bond stability.

    Science.gov (United States)

    Mazzoni, A; Tjäderhane, L; Checchi, V; Di Lenarda, R; Salo, T; Tay, F R; Pashley, D H; Breschi, L

    2015-02-01

    Dentin can be described as a biological composite with collagen matrix embedded with nanosized hydroxyapatite mineral crystallites. Matrix metalloproteinases (MMPs) and cysteine cathepsins are families of endopeptidases. Enzymes of both families are present in dentin and collectively capable of degrading virtually all extracellular matrix components. This review describes these enzymes and their presence in dentin, mainly focusing on their role in dentin caries pathogenesis and loss of collagen in the adhesive hybrid layer under composite restorations. MMPs and cysteine cathepsins present in saliva, mineralized dentin, and/or dentinal fluid may affect the dentin caries process at the early phases of demineralization. Changes in collagen and noncollagenous protein structure may participate in observed decreases in mechanical properties of caries-affected dentin and reduce the ability of caries-affected dentin to remineralize. These endogenous enzymes also remain entrapped within the hybrid layer during the resin infiltration process, and the acidic bonding agents themselves (irrespective of whether they are etch-and-rinse or self-etch) can activate these endogenous protease proforms. Since resin impregnation is frequently incomplete, denuded collagen matrices associated with free water (which serves as a collagen cleavage reagent for these endogenous hydrolase enzymes) can be enzymatically disrupted, finally contributing to the degradation of the hybrid layer. There are multiple in vitro and in vivo reports showing that the longevity of the adhesive interface is increased when nonspecific enzyme-inhibiting strategies are used. Different chemicals (i.e., chlorhexidine, galardin, and benzalkonium chloride) or collagen cross-linker agents have been successfully employed as therapeutic primers in the bonding procedure. In addition, the incorporation of enzyme inhibitors (i.e., quaternary ammonium methacrylates) into the resin blends has been recently promoted. This

  8. Manipulation of spontaneous emission dynamics of organic dyes in the porous silicon matrix.

    Science.gov (United States)

    Makhal, Abhinandan; Kumar, Pushpendra; Lemmens, Peter; Pal, Samir Kumar

    2010-01-01

    The control of the spontaneous emission (SE) rate of dye molecules (4-dicyanomethylene-2-methyl-6-p-dimethylaminostyryl-4H-pyran (DCM) and Coumarin 523 (C523)) embedded in the Porous Silicon (PS) matrix has been studied using picosecond resolved fluorescence decay and polarization studies. We have shown that the SE rates of the two organic dyes embedded in the PS matrix depend on the relative positions of the emission maxima of the dyes with respect to electronic band gap energy of the PS matrix. We have also explored that the electronic band gap of the host PS matrix can easily be tuned by partial oxidation of the PS and the nature of SE of the embedded dyes can be tuned accordingly. The demonstrated retardation or enhancement of the spontaneous photon emission may enable the application of fluorescent organic molecules in PS matrix in several quantum optical devices including the realization of single photon sources.

  9. Effects of air-drying in vitro on human dentine permeability.

    Science.gov (United States)

    Pashley, D H; Stewart, F P; Galloway, S E

    1984-01-01

    The effects of evaporation produced by air blasts of 0, 0.5, 2 or 5 min to dentine in vitro were evaluated by measuring dentine hydraulic conductance before and after each trial. When the tubules were filled with water, even prolonged evaporation had no effect on dentine permeability. Tubules filled with physiological salt solution produced a time-dependent decrease in dentine permeability. Tubules filled with 1.5 per cent albumin in water gave the largest reductions in dentine permeability. These effects were more marked in unetched as opposed to acid-etched dentine. The results suggest that part of the reduction in dentine sensitivity produced clinically by prolonged air blasts may be due to precipitation of organic and inorganic constituents of dentinal fluid at the surface.

  10. Densitometric analysis of the autogenous demineralized dentin matrix on the dental socket wound healing process in humans Análise densitométrica da matriz dentinária desmineralizada autógena na reparação alveolar de humanos

    Directory of Open Access Journals (Sweden)

    Mônica Fernandes Gomes

    2006-12-01

    Full Text Available The aim of this study was to evaluate the effects of the autogenous demineralized dentin matrix (ADDM on the third molar socket wound healing process in humans, using the guided bone regeneration technique and a polytetrafluoroethylene barrier (PTFE. Twenty-seven dental sockets were divided into three groups: dental socket (Control, dental socket with PTFE barrier (PTFE, and dental socket with ADDM slices associated to PTFE barrier (ADDM + PTFE. The dental sockets were submitted to radiographic bone densitometry analysis and statistical analysis on the 15th, 30th, 60th and 90th days using analysis of variance (ANOVA and Tukey's test (p £ 0.05. The radiographic analysis of the ADDM + PTFE group showed greater homogeneity of bone radiopacity than the Control group and the PTFE group, during all the observation times. The dentin matrix gradually disappeared from the dental socket during the course of the repair process, suggesting its resorption during the bone remodeling process. It was concluded that the radiographic bone density of the dental sockets treated with ADDM was similar to that of the surrounding normal bone on the 90th day. The ADDM was biocompatible with the bone tissue of the surgical wounds of human dental sockets. The radiographic analysis revealed that the repair process was discreetly faster in the ADDM + PTFE group than in the Control and PTFE groups, although the difference was not statistically significant. In addition, the radiographic image of the ADDM + PTFE group suggested that its bone architecture was better than that of the Control and PFTE groups.O objetivo desta pesquisa foi avaliar a reparação óssea em alvéolos dentários após exodontia dos terceiros molares inferiores em humanos, com implantação de matriz dentinária desmineralizada autógena (MDDA na cavidade e cobertura desta com barreira de politetrafluoretileno (PTFE. Foram selecionados 27 dentes, os quais foram divididos em três grupos: alvéolo dent

  11. In-depth, high-accuracy proteomics of sea urchin tooth organic matrix

    Directory of Open Access Journals (Sweden)

    Mann Matthias

    2008-12-01

    Full Text Available Abstract Background The organic matrix contained in biominerals plays an important role in regulating mineralization and in determining biomineral properties. However, most components of biomineral matrices remain unknown at present. In sea urchin tooth, which is an important model for developmental biology and biomineralization, only few matrix components have been identified. The recent publication of the Strongylocentrotus purpuratus genome sequence rendered possible not only the identification of genes potentially coding for matrix proteins, but also the direct identification of proteins contained in matrices of skeletal elements by in-depth, high-accuracy proteomic analysis. Results We identified 138 proteins in the matrix of tooth powder. Only 56 of these proteins were previously identified in the matrices of test (shell and spine. Among the novel components was an interesting group of five proteins containing alanine- and proline-rich neutral or basic motifs separated by acidic glycine-rich motifs. In addition, four of the five proteins contained either one or two predicted Kazal protease inhibitor domains. The major components of tooth matrix were however largely identical to the set of spicule matrix proteins and MSP130-related proteins identified in test (shell and spine matrix. Comparison of the matrices of crushed teeth to intact teeth revealed a marked dilution of known intracrystalline matrix proteins and a concomitant increase in some intracellular proteins. Conclusion This report presents the most comprehensive list of sea urchin tooth matrix proteins available at present. The complex mixture of proteins identified may reflect many different aspects of the mineralization process. A comparison between intact tooth matrix, presumably containing odontoblast remnants, and crushed tooth matrix served to differentiate between matrix components and possible contributions of cellular remnants. Because LC-MS/MS-based methods directly

  12. Multi-walled carbon nanotubes/graphene oxide hybrid and nanohydroxyapatite composite: A novel coating to prevent dentin erosion.

    Science.gov (United States)

    Nahorny, Sídnei; Zanin, Hudson; Christino, Vinie Abreu; Marciano, Fernanda Roberta; Lobo, Anderson Oliveira; Soares, Luís Eduardo Silva

    2017-10-01

    To date is emergent the development of novel coatings to protect erosion, especially to preventive dentistry and restorative dentistry. Here, for the first time we report the effectiveness of multi-walled carbon nanotube/graphene oxide hybrid carbon-base material (MWCNTO-GO) combined with nanohydroxyapatite (nHAp) as a protective coating for dentin erosion. Fourier transform Raman spectroscopy (FT-Raman), scanning electron (SEM), and transmission electron (TEM) microscopy were used to investigated the coatings and the effect of acidulated phosphate fluoride gel (APF) treatment on bovine teeth root dentin before and after erosion. The electrochemical corrosion performance of the coating was evaluated. Raman spectra identified that: (i) the phosphate (ν1PO4(3-)) content of dentin was not significantly affected by the treatments and (ii) the carbonate (ν1CO3(2-)) content in dentin increased when nHAp was used. However, the nHAp/MWCNTO-GO composite exposited lower levels of organic matrix (CH bonds) after erosion compared to other treatments. Interesting, SEM micrographs identified that the nHAp/MWCNTO-GO formed layers after erosive cycling when associate with APF treatment, indicating a possible chemical bond among them. Treatments of root dentin with nHAp, MWCNTO-GO, APF_MWCNTO-GO, and APF_nHAp/MWCNTO-GO increased the carbonate content, carbonate/phosphate ratio, and organic matrix band area after erosion. The potentiodynamic polarization curves and Nyquist plot showed that nHAp, MWCNT-GO and nHAp/MWCNT-GO composites acted as protective agents against corrosion process. Clearly, the nHAp/MWCNTO-GO composite was stable after erosive cycling and a thin and acid-resistant film was formed when associated to APF treatment. Copyright © 2017 Elsevier B.V. All rights reserved.

  13. Structure and composition of enamel and dentin after thermal treatment or infrared laser irradiation; Estrutura e composicao do esmalte e da dentina tratados termicamente ou irradiados com lasers emissores no infravermelho

    Energy Technology Data Exchange (ETDEWEB)

    Bachmann, Luciano

    2004-07-01

    The main purpose of this work is to identify the crystallographic structure, optical properties, chemical composition and electron paramagnetic signals that laser irradiation or oven heating produces on the tissue. The thermal treatment was conducted in oven with temperature range below 1000 deg C and the laser irradiation with holmium (Ho:YLF - 2,065 {mu}m) and erbium (Er:YAG - 2,94 {mu}m) laser. The tissue characterization was carried out with X-ray diffraction, scanning electron microscopy, ultraviolet and visible transmission spectroscopy, light microscopy, infrared transmission/reflection spectroscopy and electron paramagnetic resonance. The holmium irradiated enamel (600-800 J/cm{sup 2}) shows the presence of tetracalcium phosphate that coexists with the natural phase (hydroxyapatite). The irradiated dentin shows only the sharper diffraction peaks of the natural phase. The narrows peaks, observed after irradiation, could be assigned to the dentin crystal growth and impurities elimination. Tissue discoloration is observed after thermal treatment with temperatures above 100 deg C. Heated enamel become white-opaque and the origin is assigned to the water elimination, which promotes higher light scattering by the prismatic structure. On the other hand, heated dentin, with similar temperatures becomes brown. The dentin browning changes with the temperature and shown two peaks, at 375 deg C and 700 deg C. The peak at 375 deg C is assigned to the collagen structure degradation and at 700 deg C to the cyanate formation. The dentin discoloration produced with temperatures below 200 deg C is reversible after the tissue hydration. Both enamel and dentin discoloration are also observed in erbium irradiated tissues. Thermal treatments, heating in oven or laser irradiation, change mainly the organic matrix composition and water present in the tissues. The inorganic matrix is more stable and its radicals are changed, with more predominance, only at temperatures higher than

  14. Dentin bond strengths of simplified adhesives: effect of dentin depth.

    Science.gov (United States)

    Lopes, Guilherme Carpena; Perdigão, Jorge; Lopes, Mariana de F; Vieira, Luiz Clovis Cardoso; Baratieri, Luiz Narciso; Monteiro, Sylvio

    2006-06-01

    The objective of this study was to compare the shear bond strength of 3 simplified adhesive systems applied on shallow vs deep dentin. For superficial dentin, 30 human molars were sectioned with a diamond saw to expose dentin immediately below the dentoenamel junction. For deep dentin, 30 molars were sectioned 3 mm below the dentoenamel junction. The teeth were mounted, polished to 600-grit, and randomly assigned to 3 groups (n=10): Single Bonda and OptiBond Solo, total-etch adhesives, and Clearfil Liner Bond 2V, a self-etching primer adhesive. Adhesives were applied, the restorative material Filtek Z250 inserted in a No. 5 gelatin capsule, and light-cured. After 24 hours in water at 37 degrees C, shear bond strength was measured with an Instron at 5 mm/min. The data were analyzed with 2-way ANOVA and Duncan's post-hoc test. The results showed the following shear bond strengths (mean +/- SD in MPa): Single Bond/superficial dentin = 22.1 +/- 2.8; Single Bond/deep dentin = 14.2 +/- 7.0; OptiBond Solo/superficial dentin = 18.9 +/- 4.1; OptiBond Solo/deep dentin = 18.4 +/- 4.8; Clearfil Liner Bond 2V/superficial dentin = 21.0 +/- 7.4; Clearfil Liner Bond 2V/deep dentin = 17.6 +/- 5.9. There were no significant differences between mean shear bond strength for the factor "adhesive system" (P>.822). The Duncan's test showed that Single Bond resulted in higher shear bond strength on superficial dentin than on deep dentin. The mean shear bond strength for Clearfil Liner Bond 2V and OptiBond Solo were not influenced by dentin depth. When data were pooled for dentin depth, deep dentin resulted in statistically lower bond strengths than superficial dentin (Pcomposition of the dentin adhesive.

  15. The nuclear matrix and the regulation of chromatin organization and function.

    Science.gov (United States)

    Davie, J R

    1995-01-01

    Nuclear DNA is organized into loop domains, with the base of the loop being bound to the nuclear matrix. Loops with transcriptionally active and/or potentially active genes have a DNase I-sensitive chromatin structure, while repressed chromatin loops have a condensed configuration that is essentially invisible to the transcription machinery. Core histone acetylation and torsional stress appear to be responsible for the generation and/or maintenance of the open potentially active chromatin loops. The transcriptionally active region of the loop makes several dynamic attachments with the nuclear matrix and is associated with core histones that are dynamically acetylated. Histone acetyltransferase and deacetylase, which catalyze this rapid acetylation and deacetylation, are bound to the nuclear matrix. Several transcription factors are components of the nuclear matrix. Histone acetyltransferase, deacetylase, and transcription factors may contribute to the dynamic attachment of the active chromatin domains with the nuclear matrix at sites of ongoing transcription.

  16. A flexible organic active matrix circuit fabricated using novel organic thin film transistors and organic light-emitting diodes

    KAUST Repository

    Gutiérrez-Heredia, Gerardo

    2010-10-04

    We present an active matrix circuit fabricated on plastic (polyethylene naphthalene, PEN) and glass substrates using organic thin film transistors and organic capacitors to control organic light-emitting diodes (OLEDs). The basic circuit is fabricated using two pentacene-based transistors and a capacitor using a novel aluminum oxide/parylene stack (Al2O3/ parylene) as the dielectric for both the transistor and the capacitor. We report that our circuit can deliver up to 15 μA to each OLED pixel. To achieve 200 cd m-2 of brightness a 10 μA current is needed; therefore, our approach can initially deliver 1.5× the required current to drive a single pixel. In contrast to parylene-only devices, the Al2O 3/parylene stack does not fail after stressing at a field of 1.7 MV cm-1 for >10 000 s, whereas \\'parylene only\\' devices show breakdown at approximately 1000 s. Details of the integration scheme are presented. © 2010 IOP Publishing Ltd.

  17. A flexible organic active matrix circuit fabricated using novel organic thin film transistors and organic light-emitting diodes

    Science.gov (United States)

    Gutiérrez-Heredia, G.; González, L. A.; Alshareef, H. N.; Gnade, B. E.; Quevedo-López, M.

    2010-11-01

    We present an active matrix circuit fabricated on plastic (polyethylene naphthalene, PEN) and glass substrates using organic thin film transistors and organic capacitors to control organic light-emitting diodes (OLEDs). The basic circuit is fabricated using two pentacene-based transistors and a capacitor using a novel aluminum oxide/parylene stack (Al2O3/parylene) as the dielectric for both the transistor and the capacitor. We report that our circuit can deliver up to 15 µA to each OLED pixel. To achieve 200 cd m-2 of brightness a 10 µA current is needed; therefore, our approach can initially deliver 1.5× the required current to drive a single pixel. In contrast to parylene-only devices, the Al2O3/parylene stack does not fail after stressing at a field of 1.7 MV cm-1 for >10 000 s, whereas 'parylene only' devices show breakdown at approximately 1000 s. Details of the integration scheme are presented.

  18. Characterization and analysis of matrix metalloproteinases 8 and 20 in the human crown and root dentin%人牙冠及根部牙本质内基质金属蛋白酶8,20的测定及分析

    Institute of Scientific and Technical Information of China (English)

    朱梓园; 周恬; 张保卫

    2012-01-01

    BACKGROUND: In recent years, matrix metalloproteinases (MMP)-mediated collagen degradation in dentin has been widely studied. Recent studies have shown that MMPs play an important role in the progress of periodontal disease, dentin caries, pulpitis and failure in dentin adhesive interface.OBJECTIVE: To determine the contents and distribution features of MMP-8 and -20 in the human crown and root dentin.METHODS: Dentin powder was extracted by guanidine hydrochloride, then subjected to ethylene diamine tetraacetic acid demineralization in four cycles, and finally extracted by guanidine hydrochloride again. Extracts were analyzed by Western blot and enzyme linked immunosorbent assay (ELISA) for MMP-8 and -20 detection.RESULTS AND CONCLUSION: MMP-8 and MMP-20 in the extracted materials were confirmed by western blot and ELISA. MMP-8 and -20 were mostly extracted from the mineralized compartment of the dentin (E1). These two MMPs presented overall lower levels in G1 and the lowest levels in G2. Both Western blot analysis and ELISA detected that MMP-8 and -20 equally distributed in the crown and root dentin. MMP-8 and MMP-20 proteins have been found in the extracted materials from the human crown and root dentin. They are mostly presented in mineralized dentin, both in the crown and root dentin.%背景:基质金属蛋白酶被激活后可降解细胞外基质,其对牙本质胶原的破坏对于牙周病、牙本质龋病、牙髓炎的进展及牙本质黏结的失败有重要影响.目的:检测冠根部牙本质内基质金属蛋白酶的含量及其分布特点.方法:牙本质粉经盐酸胍提取,然后经EDTA循环脱矿,再经盐酸胍提取.采用免疫印迹与免疫酶联吸附反应检测提取物中基质金属蛋白酶8,20的含量,对比二者在牙冠部和牙根部内的分布特点.结果与结论:免疫印迹结果及免疫酶联吸附检测结果均显示,提取物中含有基质金属蛋白酶8,20.未矿化牙本质提取蛋白G1

  19. How to bond to root canal dentin

    Science.gov (United States)

    Nica, Luminita; Todea, Carmen; Furtos, Gabriel; Baldea, Bogdan

    2014-01-01

    Bonding to root canal dentin may be difficult due to various factors: the structural characteristic of the root canal dentin, which is different from that of the coronal dentin; the presence of the organic tissue of the dental pulp inside the root canal, which has to be removed during the cleaning-shaping of the root canal system; the smear-layer resulted after mechanical instrumentation, which may interfere with the adhesion of the filling materials; the type of the irrigants used in the cleaning protocol; the type of the sealer and core material used in the obturation of the endodontic space; the type of the materials used for the restoration of the endodontically treated teeth. The influence of the cleaning protocol, of the root canal filling material, of the type of the adhesive system used in the restoration of the treated teeth and of the region of the root canal, on the adhesion of several filling and restorative materials to root canal dentin was evaluated in the push-out bond strength test on 1-mm thick slices of endodontically treated human teeth. The results showed that all these factors have a statistically significant influence on the push-out bond strength. Formation of resin tags between radicular dentin and the investigated materials was observed in some of the samples at SEM analysis.

  20. A proteinaceous organic matrix regulates carbonate mineral production in the marine teleost intestine

    Science.gov (United States)

    Schauer, Kevin L.; LeMoine, Christophe M. R.; Pelin, Adrian; Corradi, Nicolas; Warren, Wesley C.; Grosell, Martin

    2016-01-01

    Marine teleost fish produce CaCO3 in their intestine as part of their osmoregulatory strategy. This precipitation is critical for rehydration and survival of the largest vertebrate group on earth, yet the molecular mechanisms that regulate this reaction are unknown. Here, we isolate and characterize an organic matrix associated with the intestinal precipitates produced by Gulf toadfish (Opsanus beta). Toadfish precipitates were purified using two different methods, and the associated organic matrix was extracted. Greater than 150 proteins were identified in the isolated matrix by mass spectrometry and subsequent database searching using an O. beta transcriptomic sequence library produced here. Many of the identified proteins were enriched in the matrix compared to the intestinal fluid, and three showed no substantial homology to any previously characterized protein in the NCBI database. To test the functionality of the isolated matrix, a micro-modified in vitro calcification assay was designed, which revealed that low concentrations of isolated matrix substantially promoted CaCO3 production, where high concentrations showed an inhibitory effect. High concentrations of matrix also decreased the incorporation of magnesium into the forming mineral, potentially providing an explanation for the variability in magnesium content observed in precipitates produced by different fish species. PMID:27694946

  1. A proteinaceous organic matrix regulates carbonate mineral production in the marine teleost intestine

    Science.gov (United States)

    Schauer, Kevin L.; Lemoine, Christophe M. R.; Pelin, Adrian; Corradi, Nicolas; Warren, Wesley C.; Grosell, Martin

    2016-10-01

    Marine teleost fish produce CaCO3 in their intestine as part of their osmoregulatory strategy. This precipitation is critical for rehydration and survival of the largest vertebrate group on earth, yet the molecular mechanisms that regulate this reaction are unknown. Here, we isolate and characterize an organic matrix associated with the intestinal precipitates produced by Gulf toadfish (Opsanus beta). Toadfish precipitates were purified using two different methods, and the associated organic matrix was extracted. Greater than 150 proteins were identified in the isolated matrix by mass spectrometry and subsequent database searching using an O. beta transcriptomic sequence library produced here. Many of the identified proteins were enriched in the matrix compared to the intestinal fluid, and three showed no substantial homology to any previously characterized protein in the NCBI database. To test the functionality of the isolated matrix, a micro-modified in vitro calcification assay was designed, which revealed that low concentrations of isolated matrix substantially promoted CaCO3 production, where high concentrations showed an inhibitory effect. High concentrations of matrix also decreased the incorporation of magnesium into the forming mineral, potentially providing an explanation for the variability in magnesium content observed in precipitates produced by different fish species.

  2. Dentin phosphoprotein compound mutation in dentin sialophosphoprotein causes dentinogenesis imperfecta type III.

    Science.gov (United States)

    Dong, Juan; Gu, TingTing; Jeffords, Leticia; MacDougall, Mary

    2005-01-30

    A rare compound mutation involving a 36 bp deletion and 18 bp insertion within exon 5 of the dentin sialophosphoprotein (DSPP) gene has been identified in a family with dentinogenesis imperfecta type III (DGI-III). The DSPP gene encodes two major tooth matrix proteins dentin sialoprotein (DSP) and dentin phosphoprotein (DPP). DSPP mutations associated with DGI-III results in an in frame truncation of the serine aspartic acid triplet repeat found in DPP near the highly conserved carboxyl terminal region shortening the protein by six amino acids. Clinically this family presents with discolored amber opalescent teeth and severe attrition of the tooth structure. This study is the first report of a mutation within DPP associated with a genetic dentin disease. Our study indicates that DGI-III is allelic with some forms of DGI-II with and without progressive hearing loss and dentin dysplasia type II that have been shown to be caused by mutations within the DSP coding or signal peptide regions.

  3. Dentin biomodification: strategies, renewable resources and clinical applications.

    Science.gov (United States)

    Bedran-Russo, Ana K; Pauli, Guido F; Chen, Shao-Nong; McAlpine, James; Castellan, Carina S; Phansalkar, Rasika S; Aguiar, Thaiane R; Vidal, Cristina M P; Napotilano, José G; Nam, Joo-Won; Leme, Ariene A

    2014-01-01

    The biomodification of dentin is a biomimetic approach, mediated by bioactive agents, to enhance and reinforce the dentin by locally altering the biochemistry and biomechanical properties. This review provides an overview of key dentin matrix components, targeting effects of biomodification strategies, the chemistry of renewable natural sources, and current research on their potential clinical applications. The PubMed database and collected literature were used as a resource for peer-reviewed articles to highlight the topics of dentin hierarchical structure, biomodification agents, and laboratorial investigations of their clinical applications. In addition, new data is presented on laboratorial methods for the standardization of proanthocyanidin-rich preparations as a renewable source of plant-derived biomodification agents. Biomodification agents can be categorized as physical methods and chemical agents. Synthetic and naturally occurring chemical strategies present distinctive mechanism of interaction with the tissue. Initially thought to be driven only by inter- or intra-molecular collagen induced non-enzymatic cross-linking, multiple interactions with other dentin components are fundamental for the long-term biomechanics and biostability of the tissue. Oligomeric proanthocyanidins show promising bioactivity, and their chemical complexity requires systematic evaluation of the active compounds to produce a fully standardized intervention material from renewable resource, prior to their detailed clinical evaluation. Understanding the hierarchical structure of dentin and the targeting effect of the bioactive compounds will establish their use in both dentin-biomaterials interface and caries management. Copyright © 2013 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

  4. Carbodiimide inactivation of MMPs and effect on dentin bonding.

    Science.gov (United States)

    Mazzoni, A; Apolonio, F M; Saboia, V P A; Santi, S; Angeloni, V; Checchi, V; Curci, R; Di Lenarda, R; Tay, F R; Pashley, D H; Breschi, L

    2014-03-01

    The use of protein cross-linking agents during bonding procedures has been recently proposed to improve bond durability. This study aimed to use zymography and in situ zymography techniques to evaluate the ability of 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) cross-linker to inhibit matrix metalloproteinase (MMP) activity. The hypotheses tested were that: (1) bonding procedures increase dentin gelatinolytic activity and (2) EDC pre-treatment prevents this enzymatic activity. The zymographic assay was performed on protein extracts obtained from dentin powder treated with Optibond FL or Scotchbond 1XT with or without 0.3M EDC pre-treatment. For in situ zymography, adhesive/dentin interfaces were created with the same adhesives applied to acid-etched dentin slabs pre-treated or not with EDC conditioner. Zymograms revealed increased expression of dentin endogenous MMP-2 and -9 after adhesive application, while the use of EDC as a primer inactivated dentin gelatinases. Results of in situ zymograpy showed that hybrid layers of tested adhesives exhibited intense collagenolytic activity, while almost no fluorescence signal was detected when specimens were pre-treated with EDC. The correlative analysis used in this study demonstrated that EDC could contribute to inactivate endogenous dentin MMPs within the hybrid layer created by etch-and-rinse adhesives.

  5. Physical, chemical, and histologic changes in dentin caries lesions of primary teeth induced by regular use of polyol chewing gums.

    Science.gov (United States)

    Mäkinen, K K; Chiego, D J; Allen, P; Bennett, C; Isotupa, K P; Tiekso, J; Mäkinen, P L

    1998-06-01

    A previous clinical trial showed that long-term use of saliva-stimulating polyol (xylitol and sorbitol) chewing gums was associated with arrest of dental caries in young subjects. After a 20-22-month intervention (when the subjects were 8 years old), a total of 23 primary teeth with extensive dentin caries lesions whose surface in clinical examination was found to be totally rehardened (remineralized) could be removed because the teeth were near their physiologic exfoliation time. These teeth were subjected to histologic, microhardness, and electron microscopic tests. The majority of the specimens had been remineralized from the surface by a non-cellular-mediated process within the remaining collapsed, organic extracellular matrix associated with the remaining dentinal surface. Many of the underlying dentinal tubules were filled with a matrix that had been subsequently mineralized. Dental microanalyses showed that the topmost (outer) 20-microm-thick rehardened layer of the lesions exhibited the highest Ca:P ratio, which leveled off at a depth of approximately 150 microm. The rehardened surface layer (normally <0.1 mm in thickness) was significantly (P < 0.001) harder than sound dentin and nearly as hard as sound enamel. Although the main source of the mineral present in the rehardened layer was most likely of salivary origin, some extracellular remineralization was probably mediated by odontoblasts. The results complete the dinical diagnoses of the original trial and suggest that regular use of polyol chewing gums may induce changes in dentin caries lesions, which in histologic and physiochemical studies show typical characteristics of rehardening and mineralization.

  6. Structural organization and dynamics of exopolysaccharide matrix and microcolonies formation by Streptococcus mutans in biofilms.

    Science.gov (United States)

    Xiao, J; Koo, H

    2010-06-01

    To investigate the structural organization and dynamics of exopolysaccharides (EPS) matrix and microcolonies formation by Streptococcus mutans during the biofilm development process. Biofilms of Strep. mutans were formed on saliva-coated hydroxyapatite (sHA) discs in the presence of glucose or sucrose (alone or mixed with starch). At specific time points, biofilms were subjected to confocal fluorescence imaging and computational analysis. EPS matrix was steadily formed on sHA surface in the presence of sucrose during the first 8 h followed by a threefold biomass increase between 8 and 30 h of biofilm development. The initial formation and further development of three-dimensional microcolony structure occurred concomitantly with EPS matrix synthesis. Tridimensional renderings showed EPS closely associated with microcolonies throughout the biofilm development process forming four distinct domains (i) between sHA surface and microcolonies, (ii) within, (iii) covering and (iv) filling the spaces between microcolonies. The combination of starch and sucrose resulted in rapid formation of elevated amounts of EPS matrix and faster assembly of microcolonies by Strep. mutans, which altered their structural organization and susceptibility of the biofilm to acid killing (vs sucrose-grown biofilms; P matrix and microcolonies provide a more precise examination of the structural organization of biofilms than labelling bacteria alone, which could be a useful approach to elucidate the exact mechanisms by which Strep. mutans influences oral biofilm formation and possibly identify novel targets for effective antibiofilm therapies.

  7. MATRIX-VBS Condensing Organic Aerosols in an Aerosol Microphysics Model

    Science.gov (United States)

    Gao, Chloe Y.; Tsigaridis, Konstas; Bauer, Susanne E.

    2015-01-01

    The condensation of organic aerosols is represented in a newly developed box-model scheme, where its effect on the growth and composition of particles are examined. We implemented the volatility-basis set (VBS) framework into the aerosol mixing state resolving microphysical scheme Multiconfiguration Aerosol TRacker of mIXing state (MATRIX). This new scheme is unique and advances the representation of organic aerosols in models in that, contrary to the traditional treatment of organic aerosols as non-volatile in most climate models and in the original version of MATRIX, this new scheme treats them as semi-volatile. Such treatment is important because low-volatility organics contribute significantly to the growth of particles. The new scheme includes several classes of semi-volatile organic compounds from the VBS framework that can partition among aerosol populations in MATRIX, thus representing the growth of particles via condensation of low volatility organic vapors. Results from test cases representing Mexico City and a Finish forrest condistions show good representation of the time evolutions of concentration for VBS species in the gas phase and in the condensed particulate phase. Emitted semi-volatile primary organic aerosols evaporate almost completely in the high volatile range, and they condense more efficiently in the low volatility range.

  8. Effect of sodium hypochlorite treatment on remineralization of human root dentine in vitro

    NARCIS (Netherlands)

    Inaba, D; Ruben, J; Takagi, O; Arends, J

    1996-01-01

    Dentine consists simplified of mineral and of several organic components. Sodium hypochlorite (NaOCl) is a well-known nonspecific proteolytic agent capable to remove organic material. The aim of this study was to investigate the influence of organic material removal from artificial dentine lesions b

  9. Solution-Processed Organic Thin-Film Transistor Array for Active-Matrix Organic Light-Emitting Diode

    Science.gov (United States)

    Harada, Chihiro; Hata, Takuya; Chuman, Takashi; Ishizuka, Shinichi; Yoshizawa, Atsushi

    2013-05-01

    We developed a 3-in. organic thin-film transistor (OTFT) array with an ink-jetted organic semiconductor. All layers except electrodes were fabricated by solution processes. The OTFT performed well without hysteresis, and the field-effect mobility in the saturation region was 0.45 cm2 V-1 s-1, the threshold voltage was 3.3 V, and the on/off current ratio was more than 106. We demonstrated a 3-in. active-matrix organic light-emitting diode (AMOLED) display driven by the OTFT array. The display could provide clear moving images. The peak luminance of the display was 170 cd/m2.

  10. Metal–organic framework based mixed matrix membranes: a solution for highly efficient CO2 capture?

    NARCIS (Netherlands)

    Seoane, B.; Coronas, J.; Gascon, I.; Benavides, M.E.; Karvan, O.; Caro, J.; Kapteijn, F.; Gascon, J.

    2015-01-01

    The field of metal–organic framework based mixed matrix membranes (M4s) is critically reviewed, with special emphasis on their application in CO2 capture during energy generation. After introducing the most relevant parameters affecting membrane performance, we define targets in terms of selectivity

  11. ECOS E-MATRIX Methane and Volatile Organic Carbon (VOC) Emissions Best Practices Database

    Energy Technology Data Exchange (ETDEWEB)

    Parisien, Lia [The Environmental Council Of The States, Washington, DC (United States)

    2016-01-31

    This final scientific/technical report on the ECOS e-MATRIX Methane and Volatile Organic Carbon (VOC) Emissions Best Practices Database provides a disclaimer and acknowledgement, table of contents, executive summary, description of project activities, and briefing/technical presentation link.

  12. Study of photochemical transformations of organic azides by matrix isolation techniques and quantum chemistry

    Energy Technology Data Exchange (ETDEWEB)

    Gritsan, N P [Institute of Chemical Kinetics and Combustion, Siberian Branch of the Russian Academy of Sciences, Novosibirsk (Russian Federation)

    2007-12-31

    Results of investigations of organic azide photochemistry in inert gas matrices and the most important spectroscopic studies of the last decade, which formed the basis for the modern views on the photochemistry of azides, are analysed. The unique potential of the matrix isolation technique for the reliable identification of reaction intermediates is demonstrated.

  13. Evaluating EDTA as a substitute for phosphoric acid-etching of enamel and dentin.

    Science.gov (United States)

    Imbery, Terence A; Kennedy, Matthew; Janus, Charles; Moon, Peter C

    2012-01-01

    Matrix metalloproteinases (MMPs) are proteolytic enzymes released when dentin is acid-etched. The enzymes are capable of destroying unprotected collagen fibrils that are not encapsulated by the dentin adhesive. Chlorhexidine applied after etching inhibits the activation of released MMPs, whereas neutral ethylenediamine tetra-acetic acid (EDTA) prevents the release of MMPs. The purpose of this study was to determine if conditioning enamel and dentin with EDTA can be a substitute for treating acid-etching enamel and dentin with chlorhexidine. A column of composite resin was bonded to enamel and dentin after conditioning. Shear bond strengths were evaluated after 48 hours and after accelerated aging for three hours in 12% sodium hypochlorite. Shear bond strengths ranged from 15.6 MP a for accelerated aged EDTA enamel specimens to 26.8 MPa for dentin conditioned with EDTA and tested after 48 hours. A three-way ANOVA and a Tukey HSD test found statistically significant differences among the eight groups and the three independent variables (P EDTA was successfully substituted for phosphoric acid-etched enamel and dentin treated with chlorhexidine. Interactions of conditioning agent and aging were significant for dentin but not for enamel. In an effort to reduce the detrimental effects of MMPs, conditioning enamel and dentin with EDTA is an alternative to treating acid-etched dentin and enamel with chlorhexidine.

  14. Dentin sialophosphoprotein knockout mouse teeth display widened predentin zone and develop defective dentin mineralization similar to human dentinogenesis imperfecta type III.

    Science.gov (United States)

    Sreenath, Taduru; Thyagarajan, Tamizchelvi; Hall, Bradford; Longenecker, Glenn; D'Souza, Rena; Hong, Sung; Wright, J Tim; MacDougall, Mary; Sauk, John; Kulkarni, Ashok B

    2003-07-01

    Dentin sialophosphoprotein (Dspp) is mainly expressed in teeth by the odontoblasts and preameloblasts. The Dspp mRNA is translated into a single protein, Dspp, and cleaved into two peptides, dentin sialoprotein and dentin phosphoprotein, that are localized within the dentin matrix. Recently, mutations in this gene were identified in human dentinogenesis imperfecta II (Online Mendelian Inheritance in Man (OMIM) accession number 125490) and in dentin dysplasia II (OMIM accession number 125420) syndromes. Herein, we report the generation of Dspp-null mice that develop tooth defects similar to human dentinogenesis imperfecta III with enlarged pulp chambers, increased width of predentin zone, hypomineralization, and pulp exposure. Electron microscopy revealed an irregular mineralization front and a lack of calcospherites coalescence in the dentin. Interestingly, the levels of biglycan and decorin, small leucine-rich proteoglycans, were increased in the widened predentin zone and in void spaces among the calcospherites in the dentin of null teeth. These enhanced levels correlate well with the defective regions in mineralization and further indicate that these molecules may adversely affect the dentin mineralization process by interfering with coalescence of calcospherites. Overall, our results identify a crucial role for Dspp in orchestrating the events essential during dentin mineralization, including potential regulation of proteoglycan levels.

  15. Soluble silk-like organic matrix in the nacreous layer of the bivalve Pinctada maxima.

    Science.gov (United States)

    Pereira-Mouriès, Lucilia; Almeida, Maria-José; Ribeiro, Cristina; Peduzzi, Jean; Barthélemy, Michel; Milet, Christian; Lopez, Evelyne

    2002-10-01

    Nacre organic matrix has been conventionally classified as both 'water-soluble' and 'water-insoluble', based on its solubility in aqueous solutions after decalcification with acid or EDTA. Some characteristics (aspartic acid-rich, silk-fibroin-like content) were specifically attributed to either one or the other. The comparative study on the technique of extraction (extraction with water alone vs. demineralization with EDTA) presented here, seems to reveal that this generally accepted classification may need to be reconsidered. Actually, the nondecalcified soluble organic matrix, extracted in ultra-pure water, displays many of the characteristics of what until now has been called 'insoluble matrix'. We present the results obtained on this extract and on a conventional EDTA-soluble matrix, with various characterization methods: fractionation by size-exclusion and anion-exchange HPLC, amino acid analysis, glycosaminoglycan and calcium quantification, SDS/PAGE and FTIR spectroscopy. We propose that the model for the interlamellar matrix sheets of nacre given by Nakahara [In: Biomineralization and Biological Metal Accumulation, Westbroek, P. & deJong, E.W., eds, (1983) pp. 225-230. Reidel, Dordrecht, Holland] and Weiner and Traub [Phil. Trans. R. Soc. Lond. B (1984) 304, 425-434] may no longer be valid. The most recent model, proposed by Levi-Kalisman et al. [J. Struct. Biol. (2001) 135, 8-17], seemed to be more in accordance with our findings.

  16. Effect of chitosan/riboflavin modification on resin/dentin interface: spectroscopic and microscopic investigations.

    Science.gov (United States)

    Daood, Umer; Iqbal, Kulsum; Nitisusanta, Lorraine I; Fawzy, Amr S

    2013-07-01

    The aim of this study is to investigate the morphological and chemical changes of demineralized dentin collagen-matrix and resin/dentin interface associated with chitosan/riboflavin modification. Dentin disc specimens were prepared from sound molars, acid-etched with 35% phosphoric acid and modified with either 0.1% riboflavin or chitosan/riboflavin (Ch/RF ratios 1:4 or 1:1) and photo-activated by UVA. Morphological and chemical changes associated with surface modification were characterized by SEM and micro-Raman spectroscopy. Dentin surfaces of sound molars were exposed, acid-etched, and modified as described before. Etch-and-rinse dentin adhesive was applied, light-cured, and layered with resin-restorative composite. The resin infiltration and resin/dentin interface were characterized by micro-Raman spectroscopy and SEM. An open-intact collagen network-structure, formation of uniform hybrid-layer and higher resin infiltration were found with 0.1%RF and Ch/RF 1:4 modifications. Raman analysis revealed chemical changes and shifts in Amide bands with the modification of dentin collagen-matrix. The use of riboflavin and chitosan/riboflavin formulations to modify dentin-collagen matrix, with the defined ratios, stabilizes the collagen fibrillar network and enhances resin infiltration and hybrid layer formation. These preliminary results are encouraging for subsequent consideration of chitosan/riboflavin modification in adhesive dentistry.

  17. Link predication based on matrix factorization by fusion of multi class organizations of the network.

    Science.gov (United States)

    Jiao, Pengfei; Cai, Fei; Feng, Yiding; Wang, Wenjun

    2017-08-21

    Link predication aims at forecasting the latent or unobserved edges in the complex networks and has a wide range of applications in reality. Almost existing methods and models only take advantage of one class organization of the networks, which always lose important information hidden in other organizations of the network. In this paper, we propose a link predication framework which makes the best of the structure of networks in different level of organizations based on nonnegative matrix factorization, which is called NMF (3) here. We first map the observed network into another space by kernel functions, which could get the different order organizations. Then we combine the adjacency matrix of the network with one of other organizations, which makes us obtain the objective function of our framework for link predication based on the nonnegative matrix factorization. Third, we derive an iterative algorithm to optimize the objective function, which converges to a local optimum, and we propose a fast optimization strategy for large networks. Lastly, we test the proposed framework based on two kernel functions on a series of real world networks under different sizes of training set, and the experimental results show the feasibility, effectiveness, and competitiveness of the proposed framework.

  18. Energy-recycling pixel for active-matrix organic light-emitting diode display

    Science.gov (United States)

    Yang, Che-Yu; Cho, Ting-Yi; Chen, Yen-Yu; Yang, Chih-Jen; Meng, Chao-Yu; Yang, Chieh-Hung; Yang, Po-Chuan; Chang, Hsu-Yu; Hsueh, Chun-Yuan; Wu, Chung-Chih; Lee, Si-Chen

    2007-06-01

    The authors report a pixel structure for active-matrix organic light-emitting diode (OLED) displays that has a hydrogenated amorphous silicon solar cell inserted between the driving polycrystalline Si thin-film transistor and the pixel OLED. Such an active-matrix OLED pixel structure not only exhibits a reduced reflection (and thus improved contrast) compared to conventional OLEDs but also is capable of recycling both incident photon energies and internally generated OLED radiation. Such a feature of energy recycling may be of use for portable/mobile electronics, which are particularly power aware.

  19. Identification of collagen encapsulation at the dentin/adhesive interface.

    Science.gov (United States)

    Spencer, Paulette; Wang, Yong; Katz, J Lawrence

    2004-01-01

    The purpose of this study was to investigate the dentin/adhesive interfacial characteristics of three current commercial adhesives with different relative hydrophilic/hydrophobic composition, using a nondestructive staining technique. Dentin surfaces of 18 unerupted human third molars were randomly selected for treatment with one of three commercial dentin bonding agents according to manufacturers' instructions for the "wet" bonding technique. The adhesives were ranked based on hydrophilic/hydrophobic component ratios (ie, ability to dissolve in water), highest to lowest, as follows: Uno (Pulpdent) > Prime&Bond NT (PBNT, Dentsply Caulk) > Single Bond (SB, 3M ESPE). Dentin/adhesive (d/a) interface sections were stained with Goldner's trichrome, a classical bone stain, and examined using light microscopy. The extent and degree to which the adhesive encapsulates the demineralized dentin matrix is reflected in the color differences in the stained sections. The depth of demineralization appeared comparable among these bonding systems, but adhesive infiltration varied from highest to lowest as follows: Uno > PBNT > SB. The differential staining technique provided a clear representation of the depth of dentin demineralization and extent/degree of adhesive encapsulation of the exposed collagen at the d/a interface. This technique provides a mechanism for readily identifying vulnerable sites at the d/a interface. The composition of the one-bottle adhesive systems has a substantial effect on the interfacial structure of the d/a bond.

  20. Characterization of the proteinaceous skeletal organic matrix from the precious coral Corallium konojoi.

    Science.gov (United States)

    Rahman, M Azizur; Karl, Kristian; Nonaka, Masanori; Fujimura, Hiroyuki; Shinjo, Ryuichi; Oomori, Tamotsu; Wörheide, Gert

    2014-11-01

    The Japanese red and pink corals are known to be precious because of their commercial value resulting from their use in ornaments, jewelry, and medicine. Precious corals are very interesting models for biomineralization studies and possess two different skeletal structures: an axial skeleton and an endoskeleton (sclerites). Although it has long been known that the organic matrix proteins existing in coral skeletons are critical for the oriented precipitation of CaCO3 crystals, these proteins in moderate deep-sea Japanese precious corals remain uncharacterized. Therefore, in this study, we performed skeletal whole proteome analyses using 1D and 2D electrophoresis, nano-LC, and MALDI-TOF-TOF MS. We identified a total of 147 functional coral skeletal organic matrix proteins (120 from the sclerites and 36 from the axial skeleton), including two calcium-binding calmodulin. Among the organic matrix proteins identified, nine key proteins are highly typical and common in both skeletons. Strong glycosylation activity, which is essential for skeletal formation in calcifying organisms, was detected in both skeletons. This work demonstrates unique biomineralization-related proteins in precious corals and provides the first description of the major proteinaceous components of CaCO3 minerals in precious corals, enabling the comparative investigation of biocalcification in other octocorals.

  1. Morphological effects of MMPs inhibitors on the dentin bonding.

    Science.gov (United States)

    Li, He; Li, Tianbo; Li, Xiuying; Zhang, Zhimin; Li, Penglian; Li, Zhenling

    2015-01-01

    Matrix metalloproteinases (MMPs) have been studied extensively, and MMP inhibitors have been used as dental pretreatment agents prior to dentin bonding because they reduce collagen fiber degradation and improve bonding strength. However, morphologic characteristics of the collagen network after etching and of the post-adhesive dentin hybrid layers (DHL) after MMP inhibitors pretreatment have not been evaluated. Thus, we investigated demineralized dentin pretreated with chlorhexidine (CHX) and minocycline (MI) in an etch- and -rinse adhesive system with field emission scanning electron microscopy (FESEM) and immuno-gold labeling markers to observe the collagen network and DHL. FESEM revealed after CHX and MI, a demineralized dentin surface and improved collagen network formation, reduced collagen degradation, and distinct gold-labeling signals. Applying adhesive after either MMP inhibitor created a better dentin interface as evidenced by immuno-gold staining, better adhesive penetration, and higher DHL quality. With microtensile bond strength tests (µTBS) we estimated bonding strength using µTBS data. Immediate µTBS was enhanced with MMP inhibitor application to the bonding surface, and the CHX group was significantly different than non-treated etched surfaces, but no significant change was detected in the MI group. Surface micromorphology of the fractured dentin resin restoration showed that the CHX group had a better resin and dentin tube combination. Both MMP inhibitors created uniform resin coverage. Thus, morphologic results and µTBS data suggest that CHX and MI can inhibit MMP activity, improve immediate bonding strength, and enhance dentin bonding stability with an etch- and -rinse adhesive system.

  2. Mammary epithelial cell: Influence of extracellular matrix composition and organization during development and tumorigenesis

    Science.gov (United States)

    Kass, Laura; Erler, Janine T.; Dembo, Micah; Weaver, Valerie M.

    2009-01-01

    Stromal–epithelial interactions regulate mammary gland development and are critical for the maintenance of tissue homeostasis. The extracellular matrix, which is a proteinaceous component of the stroma, regulates mammary epithelial growth, survival, migration and differentiation through a repertoire of transmembrane receptors, of which integrins are the best characterized. Integrins modulate cell fate by reciprocally transducing biochemical and biophysical cues between the cell and the extracellular matrix, facilitating processes such as embryonic branching morphogenesis and lactation in the mammary gland. During breast development and cancer progression, the extracellular matrix is dynamically altered such that its composition, turnover, processing and orientation change dramatically. These modifications influence mammary epithelial cell shape, and modulate growth factor and hormonal responses to regulate processes including branching morphogenesis and alveolar differentiation. Malignant transformation of the breast is also associated with significant matrix remodeling and a progressive stiffening of the stroma that can enhance mammary epithelial cell growth, perturb breast tissue organization, and promote cell invasion and survival. In this review, we discuss the role of stromal–epithelial interactions in normal and malignant mammary epithelial cell behavior. We specifically focus on how dynamic modulation of the biochemical and biophysical properties of the extracellular matrix elicit a dialogue with the mammary epithelium through transmembrane integrin receptors to influence tissue morphogenesis, homeostasis and malignant transformation. PMID:17719831

  3. Mechanisms regulating the degradation of dentin matrices by endogenous dentin proteases and their role in dental adhesion. A review.

    Science.gov (United States)

    Sabatini, Camila; Pashley, David H

    2014-08-01

    This systematic review provides an overview of the different mechanisms proposed to regulate the degradation of dentin matrices by host-derived dentin proteases, particularly as it relates to their role in dental adhesion. Significant developments have taken place over the last few years that have contributed to a better understanding of all the factors affecting the durability of adhesive resin restorations. The complexity of dentin-resin interfaces mandates a thorough understanding of all the mechanical, physical and biochemical aspects that play a role in the formation of hybrid layers. The ionic and hydrophilic nature of current dental adhesives yields permeable, unstable hybrid layers susceptible to water sorption, hydrolytic degradation and resin leaching. The hydrolytic activity of host-derived proteases also contributes to the degradation of the resin-dentin bonds. Preservation of the collagen matrix is critical to the improvement of resin-dentin bond durability. Approaches to regulate collagenolytic activity of dentin proteases have been the subject of extensive research in the last few years. A shift has occurred from the use of proteases inhibitors to the use of collagen cross-linking agents. Data provided by 51 studies published in peer-reviewed journals between January 1999 and December 2013 were compiled in this systematic review. Appraisal of the data provided by the studies included in the present review yielded a summary of the mechanisms which have already proven to be clinically successful and those which need further investigation before new clinical protocols can be adopted.

  4. Stabilization of chloro-organics using organophilic bentonite in a cement-blast furnace slag matrix.

    Science.gov (United States)

    Cioffi, R; Maffucci, L; Santoro, L; Glasser, F P

    2001-01-01

    The application of cement-based stabilisation/solidification treatment to organic-containing wastes is made difficult by the adverse effect of organics on cement hydration. The use of organophilic clays as pre-solidification adsorbents of the organic compounds can reduce this problem because of the high adsorption power of these clays and their compatibility with the cementitious matrix. This work presents an investigation of the effect on hydration kinetics, physico-mechanical properties and leaching behaviour of cement-based solidified waste forms containing 2-chlorophenol and 1-chloronapthalene adsorbed on organophilic bentonites. These were prepared by cation exchange with benzyldimethyloctadecylammonium chloride and trimethyloctadecylammonium chloride. The binder was a 30% pozzolanic cement, 70% granulated blast furnace slag mixture. Several binder-to-bentonite ratios and different concentrations of the organics on the bentonite were used. Kinetics of hydration were studied by measurement of chemically bound water and by means of thermal and calorimetric analyses. Microstructure and other physico-mechanical properties of the solidified forms were studied by means of mercury intrusion porosimetry, scanning electron microscopy and unconfined compressive strength measurement. Leaching was checked by two different leaching tests: one dynamic, on monolithic samples, and the other static, on powdered samples. This study indicates that the incorporation of the organic-loaded bentonite in the binder matrix causes modifications in the hardened samples by altering cement hydration. The effects of the two organic contaminants are differentiated.

  5. A COMPARATIVE EVALUATION OF BOND - STRENGTH BETWEEN NORMAL DENTIN AND CARIES AFFECTED DENTIN: AN INVITRO STUDY

    Directory of Open Access Journals (Sweden)

    Arun

    2015-03-01

    Full Text Available INTRODUCTION: The concept of adhesive dentistry has taken leaps forward and has resulted in a concept of more conservation of tooth structure which in turn enhance the life of teeth. The bonding agent forms a hybrid layer with dentin and its other side co - polymerize with the matrix p hase of dental composite, producing strong micro - mechanical bonding. AIMS AND OBJECTIVE: To evaluate the bond strength of adhesive agent to normal dentin and caries affected dentin and also to compare the bond strength between different bonding agents. METHOD: 20 mandibular molar were collected, washed and stored in normal saline. Each tooth was cut longitudinally. Healthy tooth structure of each half of the tooth represents the control group and the carious portion of the same tooth represents as experi mental group. Thus, 80 samples were prepared. The groups were then further subdivided into 4 sub - groups of 4 different bonding agents. The dentin surface of all the sub groups were etched by 37% of phosphoric acid gel for 10 - 15 secs and respective bonding agent were used and cured for 20 secs. Cylindrical composite resin was prepared using a plastic module of internal diameter of 3mm and length 5mm. Statistical analysis was done using mean standard deviation (S.D, student ‘t’ test and level of significance ‘P’. RESULTS: For both the control and experimental group, 3M single bond has showed the strongest bond strength followed by Prime and Bond NT, Excite and PQ1.

  6. Guided tissue remineralisation of partially demineralised human dentine.

    Science.gov (United States)

    Tay, Franklin R; Pashley, David H

    2008-03-01

    Biomineralisation is a well-regulated process mediated by extracellular matrix proteins. Biomimetic remineralisation strategies should reproduce the dimension and structural hierarchy of apatite deposits within a demineralised collagen matrix. Interfibrillar and intrafibrillar remineralisation of phosphoric acid-etched human dentine was demonstrated in this study using a Portland cement/phosphate-containing fluid system in the presence of polyacrylic acid and polyvinylphosphonic acid as respective calcium phosphate- and collagen-binding matrix protein analogues. Metastable amorphous calcium phosphate nanoprecursors were generated when polyacrylic acid was included in the phosphate-containing fluid. When both polyvinylphosphonic acid and polyacrylic acid were included, these nanoprecursors were attracted to the acid-demineralised collagen matrix and transformed into polyelectrolyte-stabilised apatite nanocrystals that assembled along the microfibrils (intrafibrillar remineralisation) and surface of the collagen fibrils (interfibrillar remineralisation). Transition from nanocrystals to larger apatite platelets probably occurred via the formation of mesocrystal intermediates. Guided tissue remineralisation is potentially useful in the remineralisation of acid-etched dentine that is incompletely infiltrated by dentine adhesives, as well as partially demineralised caries-affected dentine.

  7. Compounded PHOSPHO1/ALPL deficiencies reduce dentin mineralization.

    Science.gov (United States)

    McKee, M D; Yadav, M C; Foster, B L; Somerman, M J; Farquharson, C; Millán, J L

    2013-08-01

    Phosphatases are involved in bone and tooth mineralization, but their mechanisms of action are not completely understood. Tissue-nonspecific alkaline phosphatase (TNAP, ALPL) regulates inhibitory extracellular pyrophosphate through its pyrophosphatase activity to control mineral propagation in the matrix; mice without TNAP lack acellular cementum, and have mineralization defects in dentin, enamel, and bone. PHOSPHO1 is a phosphatase found within membrane-bounded matrix vesicles in mineralized tissues, and double ablation of Alpl and Phospho1 in mice leads to a complete absence of skeletal mineralization. Here, we describe mineralization abnormalities in the teeth of Phospho1(-/-) mice, and in compound knockout mice lacking Phospho1 and one allele of Alpl (Phospho1(-/-);Alpl(+/-) ). In wild-type mice, PHOSPHO1 and TNAP co-localized to odontoblasts at early stages of dentinogenesis, coincident with the early mineralization of mantle dentin. In Phospho1 knockout mice, radiography, micro-computed tomography, histology, and transmission electron microscopy all demonstrated mineralization abnormalities of incisor dentin, with the most remarkable findings being reduced overall mineralization coincident with decreased matrix vesicle mineralization in the Phospho1(-/-) mice, and the almost complete absence of matrix vesicles in the Phospho1(-/-);Alpl(+/-) mice, whose incisors showed a further reduction in mineralization. Results from this study support prominent non-redundant roles for both PHOSPHO1 and TNAP in dentin mineralization.

  8. THE COMPLEX ORGANIZATION OF EUKARYOTIC CELL NUCLEUS (III: THE NUCLEAR MATRIX AND THE NUCLEAR LAMINA

    Directory of Open Access Journals (Sweden)

    Cristian S. Cimpeanu

    2013-07-01

    Full Text Available A large variety of nuclear fibrous proteins (such as actin, myosin, lamin B, transcription factors, topoisomerases, etc represent constitutive elements of complex structures present in the eukaryotic nuclei: the nuclear matrix and the nuclear lamina, repectively. These nuclear compartments, with fibrous network-like structure, play crucialroles in structural organization of nuclei, chromatin remodeling, DNA transcription, signals transduction, cell cycle regulation, embryonic development and other nuclear basic processes.

  9. An Investigation of the Distribution of Power and Leader Effectiveness in Matrix Organizations

    Science.gov (United States)

    1989-09-01

    Multimethod Matrix," Psychological Bulletin, 56: 81-105 (April 1959). Cartwright , Dorwin . "Influence, Leadership, Control," Handbook of Organizations, edited...and Kaplan, 1950; Stotland, 1959). Definitions also vary in the extent to which they restrict power to interpersonal relationships ( Cartwright , 1959... Cartwright , 1959; Dansereau et al., 1975; Yukl, 1981; Yukl, 1989a). This perspective focuses on dyadic processes and perceptions rather than on the qualities

  10. A role for topographic cues in the organization of collagenous matrix by corneal fibroblasts and stem cells.

    Science.gov (United States)

    Karamichos, Dimitrios; Funderburgh, Martha L; Hutcheon, Audrey E K; Zieske, James D; Du, Yiqin; Wu, Jian; Funderburgh, James L

    2014-01-01

    Human corneal fibroblasts (HCF) and corneal stromal stem cells (CSSC) each secrete and organize a thick stroma-like extracellular matrix in response to different substrata, but neither cell type organizes matrix on tissue-culture polystyrene. This study compared cell differentiation and extracellular matrix secreted by these two cell types when they were cultured on identical substrata, polycarbonate Transwell filters. After 4 weeks in culture, both cell types upregulated expression of genes marking differentiated keratocytes (KERA, CHST6, AQP1, B3GNT7). Absolute expression levels of these genes and secretion of keratan sulfate proteoglycans were significantly greater in CSSC than HCF. Both cultures produced extensive extracellular matrix of aligned collagen fibrils types I and V, exhibiting cornea-like lamellar structure. Unlike HCF, CSSC produced little matrix in the presence of serum. Construct thickness and collagen organization was enhanced by TGF-ß3. Scanning electron microscopic examination of the polycarbonate membrane revealed shallow parallel grooves with spacing of 200-300 nm, similar to the topography of aligned nanofiber substratum which we previously showed to induce matrix organization by CSSC. These results demonstrate that both corneal fibroblasts and stromal stem cells respond to a specific pattern of topographical cues by secreting highly organized extracellular matrix typical of corneal stroma. The data also suggest that the potential for matrix secretion and organization may not be directly related to the expression of molecular markers used to identify differentiated keratocytes.

  11. A role for topographic cues in the organization of collagenous matrix by corneal fibroblasts and stem cells.

    Directory of Open Access Journals (Sweden)

    Dimitrios Karamichos

    Full Text Available Human corneal fibroblasts (HCF and corneal stromal stem cells (CSSC each secrete and organize a thick stroma-like extracellular matrix in response to different substrata, but neither cell type organizes matrix on tissue-culture polystyrene. This study compared cell differentiation and extracellular matrix secreted by these two cell types when they were cultured on identical substrata, polycarbonate Transwell filters. After 4 weeks in culture, both cell types upregulated expression of genes marking differentiated keratocytes (KERA, CHST6, AQP1, B3GNT7. Absolute expression levels of these genes and secretion of keratan sulfate proteoglycans were significantly greater in CSSC than HCF. Both cultures produced extensive extracellular matrix of aligned collagen fibrils types I and V, exhibiting cornea-like lamellar structure. Unlike HCF, CSSC produced little matrix in the presence of serum. Construct thickness and collagen organization was enhanced by TGF-ß3. Scanning electron microscopic examination of the polycarbonate membrane revealed shallow parallel grooves with spacing of 200-300 nm, similar to the topography of aligned nanofiber substratum which we previously showed to induce matrix organization by CSSC. These results demonstrate that both corneal fibroblasts and stromal stem cells respond to a specific pattern of topographical cues by secreting highly organized extracellular matrix typical of corneal stroma. The data also suggest that the potential for matrix secretion and organization may not be directly related to the expression of molecular markers used to identify differentiated keratocytes.

  12. Passive strain-induced matrix synthesis and organization in shape-specific, cartilaginous neotissues.

    Science.gov (United States)

    MacBarb, Regina F; Paschos, Nikolaos K; Abeug, Reedge; Makris, Eleftherios A; Hu, Jerry C; Athanasiou, Kyriacos A

    2014-12-01

    Tissue-engineered musculoskeletal soft tissues typically lack the appropriate mechanical robustness of their native counterparts, hindering their clinical applicability. With structure and function being intimately linked, efforts to capture the anatomical shape and matrix organization of native tissues are imperative to engineer functionally robust and anisotropic tissues capable of withstanding the biomechanically complex in vivo joint environment. The present study sought to tailor the use of passive axial compressive loading to drive matrix synthesis and reorganization within self-assembled, shape-specific fibrocartilaginous constructs, with the goal of developing functionally anisotropic neotissues. Specifically, shape-specific fibrocartilaginous neotissues were subjected to 0, 0.01, 0.05, or 0.1 N axial loads early during tissue culture. Results found the 0.1-N load to significantly increase both collagen and glycosaminoglycan synthesis by 27% and 67%, respectively, and to concurrently reorganize the matrix by promoting greater matrix alignment, compaction, and collagen crosslinking compared with all other loading levels. These structural enhancements translated into improved functional properties, with the 0.1-N load significantly increasing both the relaxation modulus and Young's modulus by 96% and 255%, respectively, over controls. Finite element analysis further revealed the 0.1-N uniaxial load to induce multiaxial tensile and compressive strain gradients within the shape-specific neotissues, with maxima of 10.1%, 18.3%, and -21.8% in the XX-, YY-, and ZZ-directions, respectively. This indicates that strains created in different directions in response to a single axis load drove the observed anisotropic functional properties. Together, results of this study suggest that strain thresholds exist within each axis to promote matrix synthesis, alignment, and compaction within the shape-specific neotissues. Tailoring of passive axial loading, thus, presents

  13. Chlorhexidine preserves dentin bond in vitro.

    Science.gov (United States)

    Carrilho, M R O; Carvalho, R M; de Goes, M F; di Hipólito, V; Geraldeli, S; Tay, F R; Pashley, D H; Tjäderhane, L

    2007-01-01

    Loss of hybrid layer integrity compromises resin-dentin bond stability. Matrix metalloproteinases (MMPs) may be partially responsible for hybrid layer degradation. Since chlorhexidine inhibits MMPs, we hypothesized that chlorhexidine would decelerate the loss of resin-dentin bonds. Class I preparations in extracted third molars were sectioned into two halves. One half was customarily restored (etch-and-rinse adhesive/resin composite), and the other was treated with 2% chlorhexidine after being acid-etched before restoration. Specimens were stored in artificial saliva with/without protease inhibitors. Microtensile bond strengths and failure mode distribution under SEM were analyzed immediately after specimens' preparation and 6 months later. With chlorhexidine, significantly better preservation of bond strength was observed after 6 months; protease inhibitors in the storage medium had no effect. Failure analysis showed significantly less failure in the hybrid layer with chlorhexidine, compared with controls after 6 months. In conclusion, this in vitro study suggests that chlorhexidine might be useful for the preservation of dentin bond strength.

  14. Matrix production and organization by endothelial colony forming cells in mechanically strained engineered tissue constructs.

    Directory of Open Access Journals (Sweden)

    Nicky de Jonge

    Full Text Available AIMS: Tissue engineering is an innovative method to restore cardiovascular tissue function by implanting either an in vitro cultured tissue or a degradable, mechanically functional scaffold that gradually transforms into a living neo-tissue by recruiting tissue forming cells at the site of implantation. Circulating endothelial colony forming cells (ECFCs are capable of differentiating into endothelial cells as well as a mesenchymal ECM-producing phenotype, undergoing Endothelial-to-Mesenchymal-transition (EndoMT. We investigated the potential of ECFCs to produce and organize ECM under the influence of static and cyclic mechanical strain, as well as stimulation with transforming growth factor β1 (TGFβ1. METHODS AND RESULTS: A fibrin-based 3D tissue model was used to simulate neo-tissue formation. Extracellular matrix organization was monitored using confocal laser-scanning microscopy. ECFCs produced collagen and also elastin, but did not form an organized matrix, except when cultured with TGFβ1 under static strain. Here, collagen was aligned more parallel to the strain direction, similar to Human Vena Saphena Cell-seeded controls. Priming ECFC with TGFβ1 before exposing them to strain led to more homogenous matrix production. CONCLUSIONS: Biochemical and mechanical cues can induce extracellular matrix formation by ECFCs in tissue models that mimic early tissue formation. Our findings suggest that priming with bioactives may be required to optimize neo-tissue development with ECFCs and has important consequences for the timing of stimuli applied to scaffold designs for both in vitro and in situ cardiovascular tissue engineering. The results obtained with ECFCs differ from those obtained with other cell sources, such as vena saphena-derived myofibroblasts, underlining the need for experimental models like ours to test novel cell sources for cardiovascular tissue engineering.

  15. Caries correlates strongly to salivary levels of matrix metalloproteinase-8

    DEFF Research Database (Denmark)

    Hedenbjörk-Lager, Anders; Bjørndal, Lars; Gustafsson, Anders;

    2015-01-01

    examinations were performed, and stimulated saliva was collected and analyzed for concentrations of MMP-8, TIMP-1 and total protein, using an immunofluorometric assay, an enzyme-linked immunosorbent assay and the Bradford assay, respectively. Salivary numbers of mutans streptococci and lactobacilli were......The caries process in dentin involves the degradation of both mineral and organic matrix. The demineralization has been demonstrated to be caused by bacterial acids. However, the collagen degradation is considered to be initiated by endogenous proteolytic enzymes, mainly collagenolytic matrix...

  16. Methodology for matrix support: interfaces between Occupational Therapy and the health care organizing tool

    Directory of Open Access Journals (Sweden)

    Simone de Pádua Ayresb

    2012-12-01

    Full Text Available This paper discusses matrix support as a tool for transforming the ways of organizing health care,particularly concerning primary care. To this end, it conceptualizes the subject and reflects on the growing roleof the Occupational Therapist in matrix teams since the creation of the Centers of Support for Family HealthCare (NASF by the Brazilian Health Agency. Moreover, it discusses the issues raised during the workshopon “Teamwork and matrix support in Primary Health Care” held in October 2011, at the Primary Health CareSymposium of the XII Brazilian Congress and IX Latin American Congress of Occupational Therapy. It introducesreflections on the challenges encountered in the practice of matrix support in the everyday work in the NASFs.It was possible to observe that the obstacles found have been impairing workers’ activities; nevertheless, what isvalued in this article is the importance of the identification of these obstacles as the first step to overcome them,as well as the occupational therapist’s role as one of the actors of the transformations needed.

  17. Seamless metal-clad fiber-reinforced organic matrix composite structures and process for their manufacture

    Science.gov (United States)

    Bluck, Raymond M. (Inventor); Bush, Harold G. (Inventor); Johnson, Robert R. (Inventor)

    1990-01-01

    A metallic outer sleeve is provided which is capable of enveloping a hollow metallic inner member having continuous reinforcing fibers attached to the distal end thereof. The inner member is then introduced into outer sleeve until inner member is completely enveloped by outer sleeve. A liquid matrix member is then injected into space between inner member and outer sleeve. A pressurized heat transfer medium is flowed through the inside of inner member, thereby forming a fiber reinforced matrix composite material. The wall thicknesses of both inner member and outer sleeve are then reduced to the appropriate size by chemical etching, to adjust the thermal expansion coefficient of the metal-clad composite structure to the desired value. thereby forming a fiber reinforced matrix composite material. The wall thicknesses of both inner member and outer sleeve are then reduced to the appropriate size by chemical etching, to adjust the thermal expansion coefficient of the metal-clad composite structure to the desired value. The novelty of this invention resides in the development of a efficient method of producing seamless metal clad fiber reinforced organic matrix composite structures.

  18. Organic xenobiotics removal in constructed wetlands, with emphasis on the importance of the support matrix.

    Science.gov (United States)

    Dordio, A V; Carvalho, A J P

    2013-05-15

    Constructed wetlands (CWs) are increasingly popular as an efficient and economical alternative to conventional wastewater treatment processes for removal, among other pollutants, of organic xenobiotics. In CWs, pollutants are removed through the concerted action of their components, whose contribution can be maximized by careful selection of those components. Specifically for non-biodegradable organic pollutants, the materials used as support matrix of CWs can play a major role through sorption phenomena. In this review the role played by such materials in CWs is examined with special focus on the amount of research that has been conducted to date on their sorption properties relatively to organic compounds. Where available, the reports on the utilization of some of those materials on pilot or full-scale CWs are also recognized. Greatest interest has been directed to cheaper and widely available materials. Among these, clays are generally regarded as efficient sorbents, but materials originated from agricultural wastes have also gained recent popularity. Most available studies are lab-scale batch sorption experiments, whereas assays performed in full-scale CWs are still scarce. However, the available lab-scale data points to an interesting potential of many of these materials for experimentation as support matrix of CWs targeted for organic xenobiotics removal.

  19. The dentinal surface: its influence on dentinal adhesion. Part I.

    Science.gov (United States)

    Eick, J D; Cobb, C M; Chappell, R P; Spencer, P; Robinson, S J

    1991-12-01

    Three categories of dentinal adhesive are proposed: category I includes adhesives with shear bond strength values between 5 and 7 MPa; category II includes dentinal adhesives with shear bond strengths between 8 and 14 MPa; and category III includes adhesives with shear bond strength values up to 20 MPa. In part I of this article, photomicrographs of the dentinal smear layer and three category I first-generation dentin-adhesive interfaces are presented. The photomicrographs show that the wetting and penetration of the first-generation dentinal adhesives were not adequate to produce high shear bond strengths. When the category I adhesives were tested for shear bond strength, failures occurred at the interface or in the resin adhesive. Future articles will explain wetting and adhesive performance of category II and III adhesives.

  20. In vitro reparative dentin: a biochemical and morphological study

    Directory of Open Access Journals (Sweden)

    G. Teti

    2013-08-01

    Full Text Available In this study, starting from human dental pulp cells cultured in vitro, we simulated reparative dentinogenesis using a medium supplemented with different odontogenic inductors. The differentiation of dental pulp cells in odontoblast-like cells was evaluated by means of staining, and ultramorphological, biochemical and biomolecular methods. Alizarin red staining showed mineral deposition while transmission electron microscopy revealed a  synthesis of extracellular matrix fibers during the differentiation process. Biochemical assays demonstrated that the differentiated phenotype expressed odontoblast markers, such as Dentin Matrix Protein 1 (DMP1 and Dentin Sialoprotein (DSP, as well as type I collagen. Quantitative data regarding the mRNA expression of DMP1, DSP and type I  collagen were obtained by Real Time PCR. Immunofluorescence data demonstrated the various localizations of DSP and DMP1 during odontoblast differentiation. Based on our results, we obtained odontoblast-like cells which simulated the reparative dentin processes in order to better investigate the mechanism of odontoblast differentiation, and dentin extracellular matrix deposition and mineralization. 

  1. Low-Voltage, Low-Power, Organic Light-Emitting Transistors for Active Matrix Displays

    Science.gov (United States)

    McCarthy, M. A.; Liu, B.; Donoghue, E. P.; Kravchenko, I.; Kim, D. Y.; So, F.; Rinzler, A. G.

    2011-04-01

    Intrinsic nonuniformity in the polycrystalline-silicon backplane transistors of active matrix organic light-emitting diode displays severely limits display size. Organic semiconductors might provide an alternative, but their mobility remains too low to be useful in the conventional thin-film transistor design. Here we demonstrate an organic channel light-emitting transistor operating at low voltage, with low power dissipation, and high aperture ratio, in the three primary colors. The high level of performance is enabled by a single-wall carbon nanotube network source electrode that permits integration of the drive transistor and the light emitter into an efficient single stacked device. The performance demonstrated is comparable to that of polycrystalline-silicon backplane transistor-driven display pixels.

  2. Structural characterization of PTX3 disulfide bond network and its multimeric status in cumulus matrix organization.

    Science.gov (United States)

    Inforzato, Antonio; Rivieccio, Vincenzo; Morreale, Antonio P; Bastone, Antonio; Salustri, Antonietta; Scarchilli, Laura; Verdoliva, Antonio; Vincenti, Silvia; Gallo, Grazia; Chiapparino, Caterina; Pacello, Lucrezia; Nucera, Eleonora; Serlupi-Crescenzi, Ottaviano; Day, Anthony J; Bottazzi, Barbara; Mantovani, Alberto; De Santis, Rita; Salvatori, Giovanni

    2008-04-11

    PTX3 is an acute phase glycoprotein that plays key roles in resistance to certain pathogens and in female fertility. PTX3 exerts its functions by interacting with a number of structurally unrelated molecules, a capacity that is likely to rely on its complex multimeric structure stabilized by interchain disulfide bonds. In this study, PAGE analyses performed under both native and denaturing conditions indicated that human recombinant PTX3 is mainly composed of covalently linked octamers. The network of disulfide bonds supporting this octameric assembly was resolved by mass spectrometry and Cys to Ser site-directed mutagenesis. Here we report that cysteine residues at positions 47, 49, and 103 in the N-terminal domain form three symmetric interchain disulfide bonds stabilizing four protein subunits in a tetrameric arrangement. Additional interchain disulfide bonds formed by the C-terminal domain cysteines Cys(317) and Cys(318) are responsible for linking the PTX3 tetramers into octamers. We also identified three intrachain disulfide bonds within the C-terminal domain that we used as structural constraints to build a new three-dimensional model for this domain. Previously it has been shown that PTX3 is a key component of the cumulus oophorus extracellular matrix, which forms around the oocyte prior to ovulation, because cumuli from PTX3(-/-) mice show defective matrix organization. Recombinant PTX3 is able to restore the normal phenotype ex vivo in cumuli from PTX3(-/-) mice. Here we demonstrate that PTX3 Cys to Ser mutants, mainly assembled into tetramers, exhibited wild type rescue activity, whereas a mutant, predominantly composed of dimers, had impaired functionality. These findings indicate that protein oligomerization is essential for PTX3 activity within the cumulus matrix and implicate PTX3 tetramers as the functional molecular units required for cumulus matrix organization and stabilization.

  3. Diamond xenolith and matrix organic matter in the Sutter's Mill meteorite measured by C-XANES

    Science.gov (United States)

    Kebukawa, Yoko; Zolensky, Michael E.; Kilcoyne, A. L. David; Rahman, Zia; Jenniskens, Peter; Cody, George D.

    2014-11-01

    The Sutter's Mill (SM) meteorite fell in El Dorado County, California, on April 22, 2012. This meteorite is a regolith breccia composed of CM chondrite material and at least one xenolithic phase: oldhamite. The meteorite studied here, SM2 (subsample 5), was one of three meteorites collected before it rained extensively on the debris site, thus preserving the original asteroid regolith mineralogy. Two relatively large (10 μm sized) possible diamond grains were observed in SM2-5 surrounded by fine-grained matrix. In the present work, we analyzed a focused ion beam (FIB) milled thin section that transected a region containing these two potential diamond grains as well as the surrounding fine-grained matrix employing carbon and nitrogen X-ray absorption near-edge structure (C-XANES and N-XANES) spectroscopy using a scanning transmission X-ray microscope (STXM) (Beamline 5.3.2 at the Advanced Light Source, Lawrence Berkeley National Laboratory). The STXM analysis revealed that the matrix of SM2-5 contains C-rich grains, possibly organic nanoglobules. A single carbonate grain was also detected. The C-XANES spectrum of the matrix is similar to that of insoluble organic matter (IOM) found in other CM chondrites. However, no significant nitrogen-bearing functional groups were observed with N-XANES. One of the possible diamond grains contains a Ca-bearing inclusion that is not carbonate. C-XANES features of the diamond-edges suggest that the diamond might have formed by the CVD process, or in a high-temperature and -pressure environment in the interior of a much larger parent body.

  4. SCANNING ELECTRON MICROSCOPIC INVESTIGATION OF DENTINAL TUBULES IN MONKEY DENTIN SCANNING ELECTRON MICROSCOPIC INVESTIGATION OF DENTINAL TUBULES IN Cebus apella DENTIN

    Directory of Open Access Journals (Sweden)

    João Humberto Antoniazzi

    2009-12-01

    Full Text Available

    The aim of the study was to investigate the number and diameter of the Cebus apella dentinal tubules. The roots of the Cebus apella teeth were examined in specific tooth locations: the apical, middle and cervical dentin. The calculations were based on the scanning electron microscope photographs of the fractured surfaces. The results showed that the average number of dentinal tubules for each location was: 74,800 tubules/mm2 for apical root dentin, 90,000 tubules/mm2 for mid-root dentin, 91,600 tubules/mm2 for cervical root dentin. The average diameter was the following: apical root dentin, 4,30µm; mid-root dentin, 4,37µm; cervical root dentin,  5,23µm. These findings demonstrate that the Cebus apella teeth are a suitable substitute for human in endodontics studies. 

    KEY WORDS: Dentin, dentinal tubules, teeth.
    The aim of the study was to investigate the number and diameter of the Cebus apella dentinal tubules. The roots of the Cebus apella teeth were examined in specific tooth locations: the apical, middle and cervical dentin. The calculations were based on the scanning electron microscope photographs of the fractured surfaces. The results showed that the average number of dentinal tubules for each location was: 74,800 tubules/mm2 for apical root dentin, 90,000 tubules/mm2 for mid-root dentin, 91,600 tubules/mm2 for cervical root dentin. The average diameter was the following: apical root dentin, 4,30µm; mid-root dentin, 4,37µm; cervical root dentin,  5,23µm. These findings demonstrate that the Cebus apella teeth are a suitable substitute for human in endodontics studies. 

    KEY WORDS: Dentin, dentinal tubules, teeth.

  5. The Effect of Epigallocatechin Gallate on the Dentin Bond Durability of Two Self-etch Adhesives.

    Science.gov (United States)

    Khamverdi, Zahra; Rezaei-Soufi, Loghman; Rostamzadeh, Tayebeh

    2015-06-01

    Self-etch adhesives can activate matrix metalloproteinase (MMP) which hydrolyzes organic matrix of demineralized dentin. Epigallocatechin gallate (EGCG), especially found in green tea, could inhibit the activation of MMP. The aim of this study was to evaluate the effect of adding Epigallocatechin gallate (EGCG) into two types of adhesives on dentin bond strength. In this experimental study, 64 extracted third molars were randomly divided into 16 groups. Clearfil SE Bond and Filtek Silorane System with 0 µM, 25µM, 50µM, and 100µM concentration of 95% EGCG were used for bonding. Following the bonding and fabrication of beams (1±0.1 mm(2)) and storage in distilled water, the specimens were subjected to thermal cycles. Microtensile bond strengths of 8 groups were examined after 24 hours and others were tested after 6 months. The fracture modes of specimens were evaluated by stereomicroscope and SEM. Data were analyzed by three-way ANOVA and t-test (α = 0.05). The results of the three- way ANOVA test showed that types of bonding, storage time and interactive effect of EGCG concentration and bonding influenced the bond strength of specimens significantly (pbond strength of Clearfil SE Bond with no EGCG (p= 0.017). The most common failure modes in Filtek Silorane System groups and Clearfil SE Bond groups were adhesive and mixed/cohesive, respectively. The results of SEM at different magnifications showed that most fractures have occurred in the hybrid layer. Although adding 100 µM volume of EGCG to Clearfil SE Bond can preserve the dentin bond, incorporation of EGCG in the silorane system, especially in high concentrations, decreases the bond strength after 6 months.

  6. The Effect of Epigallocatechin Gallate on the Dentin Bond Durability of Two Self-etch Adhesives

    Directory of Open Access Journals (Sweden)

    Zahra Khamverdi

    2015-06-01

    Full Text Available Statement of the Problem: Self-etch adhesives can activate matrix metalloprotein-ase (MMP which hydrolyzes organic matrix of demineralized dentin. Epigallocatechin gallate (EGCG, especially found in green tea, could inhibit the activation of MMP. Purpose: The aim of this study was to evaluate the effect of adding Epigallocatechin gallate (EGCG into two types of adhesives on dentin bond strength. Materials and Method: In this experimental study, 64 extracted third molars were randomly divided into 16 groups. Clearfil SE Bond and Filtek Silorane System with 0 µM, 25µM, 50µM, and 100µM concentration of 95% EGCG were used for bond-ing. Following the bonding and fabrication of beams (1±0.1 mm2 and storage in distilled water, the specimens were subjected to thermal cycles. Microtensile bond strengths of 8 groups were examined after 24 hours and others were tested after 6 months. The fracture modes of specimens were evaluated by stereomicroscope and SEM. Data were analyzed by three-way ANOVA and t-test (α = 0.05. Results: The results of the three- way ANOVA test showed that types of bonding, storage time and interactive effect of EGCG concentration and bonding influenced the bond strength of specimens significantly (p<0.05. The results of the t-test indi-cated that storage time only had significant effect on bond strength of Clearfil SE Bond with no EGCG (p= 0.017. The most common failure modes in Filtek Silorane System groups and Clearfil SE Bond groups were adhesive and mixed/cohesive, respectively. The results of SEM at different magnifications showed that most fractures have occurred in the hybrid layer. Conclusion: Although adding 100 µM volume of EGCG to Clearfil SE Bond can preserve the dentin bond, incorporation of EGCG in the silorane system, especially in high concentrations, decreases the bond strength after 6 months.

  7. Gas transport in metal organic framework–polyetherimide mixed matrix membranes: The role of the polyetherimide backbone structure

    NARCIS (Netherlands)

    Hegde, Maruti; Shahid, S.; Norder, Ben; Dingemans, Theo J.; Nijmeijer, Dorothea C.

    2015-01-01

    We report on how the morphology of the polymer matrix, i.e. amorphous vs. semi-crystalline, affects the gas transport properties in a series of mixed matrix membranes (MMMs) using Cu3(BTC)2 as the metal organic framework (MOF) filler. The aim of our work is to demonstrate how incorporation of

  8. Gas transport in metal organic framework–polyetherimide mixed matrix membranes: The role of the polyetherimide backbone structure

    NARCIS (Netherlands)

    Hegde, Maruti; Shahid, Salman; Norder, Ben; Dingemans, Theo J.; Nijmeijer, Kitty

    2015-01-01

    We report on how the morphology of the polymer matrix, i.e. amorphous vs. semi-crystalline, affects the gas transport properties in a series of mixed matrix membranes (MMMs) using Cu3(BTC)2 as the metal organic framework (MOF) filler. The aim of our work is to demonstrate how incorporation of Cu3(BT

  9. Topical application of lithium chloride on the pulp induces dentin regeneration.

    Directory of Open Access Journals (Sweden)

    Kazuya Ishimoto

    Full Text Available We herein describe a novel procedure for dentin regeneration that mimics the biological processes of tooth development in nature. The canonical Wnt signaling pathway is an important regulator of the Dentin sialophosphoprotein (Dspp expression. Our approach mimics the biological processes underlying tooth development in nature and focuses on the activation of canonical Wnt signaling to trigger the natural process of dentinogenesis. The coronal portion of the dentin and the underlying pulp was removed from the first molars. We applied lithium chloride (LiCl, an activator of canonical Wnt signaling, on the amputated pulp surface to achieve transdifferentiation toward odontoblasts from the surrounding pulpal cells. MicroCT and microscopic analyses demonstrated that the topical application of LiCl induced dentin repair, including the formation of a complete dentin bridge. LiCl-induced dentin is a tubular dentin in which the pulp cells are not embedded within the matrix, as in primary dentin. In contrast, a dentin bridge was not induced in the control group treated with pulp capping with material carriers alone, although osteodentin without tubular formation was induced at a comparatively deeper position from the pulp exposure site. We also evaluated the influence of LiCl on differentiation toward odontoblasts in vitro. In the mDP odontoblast cell line, LiCl activated the mRNA expression of Dspp, Axin2 and Kallikrein 4 (Klk4 and downregulated the Osteopontin (Osp expression. These results provide a scientific basis for the biomimetic regeneration of dentin using LiCl as a new capping material to activate dentine regeneration.

  10. Topical Application of Lithium Chloride on the Pulp Induces Dentin Regeneration

    Science.gov (United States)

    Ishimoto, Kazuya; Hayano, Satoru; Yanagita, Takeshi; Kurosaka, Hiroshi; Kawanabe, Noriaki; Itoh, Shinsuke; Ono, Mitsuaki; Kuboki, Takuo; Kamioka, Hiroshi; Yamashiro, Takashi

    2015-01-01

    We herein describe a novel procedure for dentin regeneration that mimics the biological processes of tooth development in nature. The canonical Wnt signaling pathway is an important regulator of the Dentin sialophosphoprotein (Dspp) expression. Our approach mimics the biological processes underlying tooth development in nature and focuses on the activation of canonical Wnt signaling to trigger the natural process of dentinogenesis. The coronal portion of the dentin and the underlying pulp was removed from the first molars. We applied lithium chloride (LiCl), an activator of canonical Wnt signaling, on the amputated pulp surface to achieve transdifferentiation toward odontoblasts from the surrounding pulpal cells. MicroCT and microscopic analyses demonstrated that the topical application of LiCl induced dentin repair, including the formation of a complete dentin bridge. LiCl-induced dentin is a tubular dentin in which the pulp cells are not embedded within the matrix, as in primary dentin. In contrast, a dentin bridge was not induced in the control group treated with pulp capping with material carriers alone, although osteodentin without tubular formation was induced at a comparatively deeper position from the pulp exposure site. We also evaluated the influence of LiCl on differentiation toward odontoblasts in vitro. In the mDP odontoblast cell line, LiCl activated the mRNA expression of Dspp, Axin2 and Kallikrein 4 (Klk4) and downregulated the Osteopontin (Osp) expression. These results provide a scientific basis for the biomimetic regeneration of dentin using LiCl as a new capping material to activate dentine regeneration. PMID:25812134

  11. Dentin permeability: determinants of hydraulic conductance.

    Science.gov (United States)

    Reeder, O W; Walton, R E; Livingston, M J; Pashley, D H

    1978-02-01

    A technique is described which permits measurements of the ease with which fluid permeates dentin. This value, the hydraulic conductance of dentin, increased as surface area increases and/or as dentin thickness decreases. It increased 32-fold when dentin was acid etched due to removal of surface debris occluding the tubules.

  12. Organization of the lamin scaffold in the internal nuclear matrix of normal and transformed hepatocytes.

    Science.gov (United States)

    Barboro, Paola; D'Arrigo, Cristina; Repaci, Erica; Patrone, Eligio; Balbi, Cecilia

    2010-04-01

    Nuclear lamins are among the more abundant proteins making up the internal nuclear matrix, but very little is known about their structure in the nucleoplasm. Using immunoelectron microscopy, we demonstrate the organization of lamins in the nuclear matrix isolated from rat hepatocytes for the first time. Lamin epitopes are arrayed both in locally ordered clusters and in quasi-regular rows. Fourier filtering of the images demonstrates that the epitopes are placed at the nodes and halfway between the nodes of square or rhombic lattices that are about 50 nm on each side, as well as along rows at regular approximately 25-nm intervals. In addition, we have compared this structure with that of the internal nuclear matrix isolated from persistent hepatocyte nodules. In transformed hepatocytes, the islands of lamin lattice are lost, and only a partial regularity in the rows of gold particles remains. We suggest that orthogonal lattice assembly might be an intrinsic property of lamin molecules, and that the disassembly may be triggered by simple molecular events such as phosphorylation. Copyright (c) 2009 Elsevier Inc. All rights reserved.

  13. Intense, hyperthermal source of organic radicals for matrix-isolation spectroscopy

    Science.gov (United States)

    Zhang, Xu; Friderichsen, Anders V.; Nandi, Sreela; Ellison, G. Barney; David, Donald E.; McKinnon, J. Thomas; Lindeman, Theodore G.; Dayton, David C.; Nimlos, Mark R.

    2003-06-01

    We have incorporated a pulsed, hyperthermal nozzle with a cryostat to study the matrix-isolated infrared spectroscopy of organic radicals. The radicals are produced by pyrolysis in a heated, narrow-bore (1-mm-diam) SiC tube and then expanded into the cryostat vacuum chamber. The combination of high nozzle temperature (up to 1800 K) and near-sonic flow velocities (on the order of 104cm s-1) through the length of the 2 cm tube allows for high yield of radicals (approximately 1013 radicals pulse-1) and low residence time (on the order of 10 μs) in the nozzle. We have used this hyperthermal nozzle/matrix isolation experiment to observe the IR spectra of complex radicals such as allyl radical (CH2CHCH2), phenyl radical (C6H5), and methylperoxyl radical (CH3OO). IR spectra of samples produced with a hyperthermal nozzle are remarkably clean and relatively free of interfering radical chemistry. By monitoring the unimolecular thermal decomposition of allyl ethyl ether in the nozzle using matrix IR spectroscopy, we have derived the residence time (τnozzle) of the gas pulse in the nozzle to be around 30 μs.

  14. Analysis of proteinaceous components of the organic matrix of endoskeletal sclerites from the alcyonarian Lobophytum crassum.

    Science.gov (United States)

    Rahman, M Azizur; Isa, Y; Takemura, A; Uehara, T

    2006-03-01

    The mesoglea of alcyonarians is occupied by an abundance of minute calcitic sclerites. The sclerites of the alcyonarian Lobophytum crassum contain a water-soluble organic matrix comprising 0.48% of the sclerite weight and a water-insoluble fraction comprising 1.15% of the sclerite weight. Analysis of proteinaceous components in the soluble fraction shows a particularly high content of aspartic acid, followed by alanine, glycine, and glutamate. Aspartic acid, glycine, alanine, and glutamate are the most abundant residues in the insoluble fraction. In both cases, the fractions show the highest concentration of aspartic acid from the total proteins. In an in vitro assay, we show that the matrix proteins extracted from the calcitic sclerites induce the formation of amorphous calcium carbonate prior to its transformation into the calcitic crystalline form. We also show scanning electron micrographs of the rhombohedral calcite crystals used as template, the protein imprinted with these crystals. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis of both matrices shows the protein fractions at 67 and 48 kDa. The soluble matrix shows two additional faint bands. Both fractions stain for a carbohydrate at 67 kDa, indicating a glycoprotein at this molecular weight. A newly derived protein sequence was subjected to bioinformatics analysis involving identification of similarities to other acidic proteins. The identification of these proteins in alcyonarian endoskeletal sclerites emphasizes the fundamental importance of such acidic proteins and sheds more light on the functions of these proteins in the processes of biocalcification.

  15. Expression patterns of nestin and dentin sialoprotein during dentinogenesis in mice.

    Science.gov (United States)

    Quispe-Salcedo, Angela; Ida-Yonemochi, Hiroko; Nakatomi, Mitsushiro; Ohshima, Hayato

    2012-04-01

    Differentiated odontoblasts could not be identified by one unique phenotypic marker, but the combination of expression of dentin phosphoprotein (Dpp), dentin sialoprotein (Dsp), dentin matrix protein 1 (Dmp1), and nestin may be valuable for the assessment of these cells. However, the findings using these proteins remain controversial. This study aimed to compare two odontoblast differentiation markers: nestin and Dsp in the process of dentinogenesis in mice. We performed immunohistochemistry and/or in situ hybridization technique for nestin and Dsp using 3-week-old incisors as well as postnatal 1-day- to 8-week-old molars. Preodontoblasts began to express nestin and Dsp proteins and Dsp mRNA, which increased in their intensity according to the progress of odontoblast differentiation in both incisors and developing molars. Nestin was consistently expressed in the differentiated odontoblasts even after the completion of dentin matrix deposition. The expression of Dsp mRNA coincided with the odontoblast secretory activity for dentin matrix deposition. In contrast, other pulpal cells, predentin matrix and dentinal tubules also showed a positive reaction for Dsp protein in addition to differentiated odontoblasts. In conclusion, nestin is valuable as a differentiation marker for odontoblasts, whereas Dsp mRNA is a functional marker for their secretory activity.

  16. Effect of carbodiimide on the structural stability of resin/dentin interface

    Directory of Open Access Journals (Sweden)

    Payal Singh

    2016-01-01

    Full Text Available Clinical longevity of composite resin restorations is a significant problem in adhesive dentistry. Most of the current simplified adhesives present good immediate bonding, but the bond strength gradually falls over a period due to biodegradation at the resin-dentin interface. Various strategies have been proposed to improve the durability of resin-dentin bond including the use of matrix metalloproteinases inhibitors and collagen cross-linkers, biomimetic remineralization, ethanol wet bonding, to improve the physical and mechanical properties of the bonding substrate, i.e., dentin. However, all are under preliminary research and without any conclusive evidence. Therefore, this paper addresses the current challenge in dental adhesion, i.e., poor durability of resin-dentin bond and introduces the concept of dentin biomodification as an alternative way for improving the long-term bonding effectiveness of current adhesives to dentin and also provides an overview of a synthetic collagen cross-linking agent carbodiimide (EDC including its mechanism of action, literature review of studies evaluating EDC, variables associated with its use and its cytotoxicity. Search was performed across the electronic databases (PubMed, Ebsco host, and Google search engine to identify manuscripts for inclusion, using the keywords: carbodiimide, dentin bonding, durability, resin-dentin interface, and collagen cross-linking. Thirty-five articles were finally included, and the last search was made in February 2016.

  17. Shear bond strength of dentin and deproteinized enamel of AI mouse incisors

    Science.gov (United States)

    Pugach, M.K.; Ozer, F.; Mulmadgi, R.; Li, Y.; Suggs, C.; Wright, J.T.; Bartlett, J.D.; Gibson, C.W.; Lindemeyer, R.G.

    2014-01-01

    Purpose To investigate the adhesion through shear bond strength (SBS) testing of a resin composite bonded with a self-etching bonding system (SEB) to amelogenesis imperfecta (AI)-affected deproteinized mouse enamel or dentin; and to compare wild-type (WT), amelogenin null (AmelxKO) and matrix metalloproteinase-20 null (Mmp20KO) enamel and dentin phenotypes using microCT and nanoindentation. Methods Enamel incisor surfaces of WT, AmelxKO and Mmp20KO mice were treated with SEB with and without NaOCl and tested for SBS. Incisor dentin was also treated with SEB and tested for SBS. These surfaces were further examined by SEM. MicroCT and nanoindentation analyses were performed on mouse dentin and enamel. Data were analyzed for significance by ANOVA. Results Deproteinization did not improve SBS of SEB to these AI-affected enamel surfaces. SBS of AmelxKO teeth was similar in dentin and enamel; however, it was higher in Mmp20KO dentin. The nanohardness of knockout enamel was significantly lower than WT, while knockout dentin nanohardness was not different from WT. Conclusions Using animal AI models, it was demonstrated that enamel NaOCl deproteinization of hypoplastic and hypoplastic-hypomaturation enamel did not increase shear bond strength while removal of the defective enamel allowed optimal dentin bonding. PMID:25303500

  18. Shear bond strength of dentin and deproteinized enamel of amelogenesis imperfecta mouse incisors.

    Science.gov (United States)

    Pugach, Megan K; Ozer, Fusun; Mulmadgi, Raj; Li, Yong; Suggs, Cynthia; Wright, J Timothy; Bartlett, John D; Gibson, Carolyn W; Lindemeyer, Rochelle G

    2014-01-01

    The purposes of this study were to: (1) investigate adhesion through shear bond strength (SBS) testing of a resin composite bonded with a self-etching bonding system (SEB) to amelogenesis imperfecta (AI)-affected deproteinized mouse enamel or dentin; and (2) compare wild-type (WT), amelogenin null (AmelxKO), and matrix metalloproteinase-20 null (Mmp20KO) enamel and dentin phenotypes using micro-CT and nanoindentation. Enamel incisor surfaces of WT, AmelxKO, and Mmp20KO mice were treated with SEB with and without sodium hypochlorite and tested for SBS. Incisor dentin was also treated with SEB and tested for SBS. These surfaces were further examined by scanning electron miscroscopy. Micro-CT and nanoindentation analyses were performed on mouse dentin and enamel. Data were analyzed for significance by analysis of variance. Deproteinization did not improve SBS of SEB to these AI-affected enamel surfaces. SBS of AmelxKO teeth was similar in dentin and enamel; however, it was higher in Mmp20KO dentin. The nanohardness of knockout enamel was significantly lower than WT, while knockout dentin nanohardness was not different from WT. Using animal amelogenesis imperfecta models, enamel sodium hypochlorite deproteinization of hypoplastic and hypoplastic-hypomaturation enamel did not increase shear bond strength, while removal of the defective enamel allowed optimal dentin bonding.

  19. Effect of carbodiimide on the structural stability of resin/dentin interface.

    Science.gov (United States)

    Singh, Payal; Nagpal, Rajni; Singh, Udai Pratap; Manuja, Naveen

    2016-01-01

    Clinical longevity of composite resin restorations is a significant problem in adhesive dentistry. Most of the current simplified adhesives present good immediate bonding, but the bond strength gradually falls over a period due to biodegradation at the resin-dentin interface. Various strategies have been proposed to improve the durability of resin-dentin bond including the use of matrix metalloproteinases inhibitors and collagen cross-linkers, biomimetic remineralization, ethanol wet bonding, to improve the physical and mechanical properties of the bonding substrate, i.e., dentin. However, all are under preliminary research and without any conclusive evidence. Therefore, this paper addresses the current challenge in dental adhesion, i.e., poor durability of resin-dentin bond and introduces the concept of dentin biomodification as an alternative way for improving the long-term bonding effectiveness of current adhesives to dentin and also provides an overview of a synthetic collagen cross-linking agent carbodiimide (EDC) including its mechanism of action, literature review of studies evaluating EDC, variables associated with its use and its cytotoxicity. Search was performed across the electronic databases (PubMed, Ebsco host, and Google search engine) to identify manuscripts for inclusion, using the keywords: carbodiimide, dentin bonding, durability, resin-dentin interface, and collagen cross-linking. Thirty-five articles were finally included, and the last search was made in February 2016.

  20. Effect of carbodiimide on the structural stability of resin/dentin interface

    Science.gov (United States)

    Singh, Payal; Nagpal, Rajni; Singh, Udai Pratap; Manuja, Naveen

    2016-01-01

    Clinical longevity of composite resin restorations is a significant problem in adhesive dentistry. Most of the current simplified adhesives present good immediate bonding, but the bond strength gradually falls over a period due to biodegradation at the resin-dentin interface. Various strategies have been proposed to improve the durability of resin-dentin bond including the use of matrix metalloproteinases inhibitors and collagen cross-linkers, biomimetic remineralization, ethanol wet bonding, to improve the physical and mechanical properties of the bonding substrate, i.e., dentin. However, all are under preliminary research and without any conclusive evidence. Therefore, this paper addresses the current challenge in dental adhesion, i.e., poor durability of resin-dentin bond and introduces the concept of dentin biomodification as an alternative way for improving the long-term bonding effectiveness of current adhesives to dentin and also provides an overview of a synthetic collagen cross-linking agent carbodiimide (EDC) including its mechanism of action, literature review of studies evaluating EDC, variables associated with its use and its cytotoxicity. Search was performed across the electronic databases (PubMed, Ebsco host, and Google search engine) to identify manuscripts for inclusion, using the keywords: carbodiimide, dentin bonding, durability, resin-dentin interface, and collagen cross-linking. Thirty-five articles were finally included, and the last search was made in February 2016. PMID:27994309

  1. Subclinical concentrations of chlorhexidine inhibit gelatinase activity of carious dentine in vitro.

    Science.gov (United States)

    Trufello, A Mustakis; Orellana, B Urzúa; Moraga, C Lozano; Puente, C Lefimil; Morales-Bozo, I

    2014-03-01

    There is evidence that dentine matrix gelatinases are involved in the destruction of carious dentine after demineralization by bacterial acids. It has also been observed that chlorhexidine, in very low concentrations, inhibits the activity of these enzymes in mammalian cells. The goal of this study was to determine if the gelatinase activity of carious dentine may be inhibited by chlorhexidine in clinical use concentrations. Gelatinolytic activity was evaluated through zymography and identified by Western blot. The inhibitory effects of chlorhexidine at concentrations of 0.01%, 0.04%, 0.08% and 1% on the enzymatic activity of softened carious dentine samples were determined. In carious dentine, five bands of gelatinolytic activity were detected, with molecular sizes of 86, 75, 38, 33 and 32 kDa. The two bands of the greatest molecular size corresponded to latent and active metalloproteinase-9, respectively. Concentrations of chlorhexidine that were greater than or equal to 0.04% were sufficient to inhibit gelatinolytic activity in the observed bands of carious dentine. These results support the use of chlorhexidine in clinical use concentrations for the treatment and control of dentine caries. Our study demonstrates for the first time the inhibitory effect of chlorhexidine on gelatinases from carious human dentine. © 2014 Australian Dental Association.

  2. Analysis of the dentin-resin interface by use of laser Raman spectroscopy.

    Science.gov (United States)

    Miyazaki, M; Onose, H; Moore, B K

    2002-12-01

    Adhesion of resin-bonding agents to dentin is currently believed to result from impregnation of adhesive resin into superficially demineralized dentin. The purpose of this study was to investigate the chemical composition of the resin-impregnated dentin (hybrid) layer using a micro-Raman spectroscopy. Resin composites were bonded to bovine dentin with the two-step bonding systems, and specimens were sectioned parallel to dentinal tubules. These surfaces were then polished down to 1 microm diamond pastes. Raman spectra were successively recorded along a line perpendicular to the dentin-adhesive interface by steps of 0.2 microm on a computer controlled X-Y stage. The relative amounts of hydroxyapatite (960 cm(-1), P-O), adhesive resin (640 cm(-1), aromatic ring), and organic substrate (1450 cm(-1), C-H) in the dentin-adhesive bonding area were calculated. From the Raman spectroscopy results, the hybrid layer represents a gradual transition in the relative amount of adhesive from the resin side to dentin side. Evidence of poor saturation of the adhesive resin in the demineralized dentin with the one-bottle adhesive system was detected. From the results of this study, inhomogeneity of the hybrid layer composition was detected, and the degree of resin impregnation was found to be different between the bonding systems tested.

  3. Morphology and chemical composition of dentin in permanent first molars with the diagnose MIH.

    Science.gov (United States)

    Heijs, Suzanne C B; Dietz, Wolfram; Norén, Jörgen G; Blanksma, Nynke G; Jälevik, Birgitta

    2007-01-01

    The purpose of this investigation was to study the morphology and distribution of some inorganic elements in dentin in first permanent molars from children with Molar-Incisor Hypomineralization (MIH). Sixty four tooth sections from thirty two children were examined in polarized light. Fifteen representative sections were selected for SEM/XRMA analysis; 5 were used for SEM analysis and 10 for XRMA analysis. No morphological changes in the dentin were revealed in polarized light microscopy (PLM). However, in all but two sections interglobular dentin was found. The SEM analyzes confirmed the findings of the PLM with no structural changes to be found in the dentin. The XRMA results showed a difference in the concentration of elements between dentin below normal and dentin below carious or hypomineralized enamel. Elements related to organic matter appeared with higher values in dentin below hypomineralized and carious enamel. The morphological and chemical findings in dentin below hypomineralized enamel imply that the odontoblasts are not affected in cases of MIH, but may be affected by hypocalcemia, reflected by the presence of interglobular dentin.

  4. Histomorphometry of the organic matrix of the femur in ovariectomized rats treated with sodium alendronate

    Directory of Open Access Journals (Sweden)

    Patricia Tanios Haddad

    2015-02-01

    Full Text Available OBJECTIVE: To evaluate the effect of two different concentrations of sodium alendronate on the quantity of organic matrix in the femur of rats with estrogen suppression caused by ovariectomy.METHODS: Sixty-days-old Wistar rats (Rattus norvegicus were subjected to bilateral laparotomy to remove the ovaries. The animals were divided into a control group, in which they only underwent laparotomy; an ovariectomized group (OVX; an ovariectomized group treated with 1 mg/kg of alendronate (OVX 1 mg; and an ovariectomized group treated with 2 mg/kg of alendronate (OVX 2 mg. The rats received alendronate twice a week for 90 days. The left femur was then removed, fixed and processed for embedding in paraffin. Semi-serial sections stained with hematoxylin and eosin were used to determine the area occupied by organic bone matrix, by means of image analysis software. The animals' weights were obtained at the beginning and end of the experiment.RESULTS: The ovariectomized animals and those treated with 1 mg/kg of alendronate presented significant increases in body weight (p 0.05 to that of the non-ovariectomized control animals (2,04,800 ± 9590, which indicates that this medication had a preventive effect with regard to bone mass loss.CONCLUSION: The higher concentration of the medication, administered twice a week for 90 days, was more effective than the dose of 1 mg/kg over the same period.

  5. FT-Raman spectroscopy study of organic matrix degradation in nanofilled resin composite.

    Science.gov (United States)

    Soares, Luís Eduardo Silva; Nahórny, Sídnei; Martin, Airton Abrahão

    2013-04-01

    This in vitro study evaluated the effect of light curing unit (LCU) type, mouthwashes, and soft drink on chemical degradation of a nanofilled resin composite. Samples (80) were divided into eight groups: halogen LCU, HS--saliva (control); HPT--Pepsi Twist®; HLC--Listerine®; HCP--Colgate Plax®; LED LCU, LS--saliva (control); LPT--Pepsi Twist®; LLC--Listerine®; LCP--Colgate Plax®. The degree of conversion analysis and the measure of the peak area at 2,930 cm-1 (organic matrix) of resin composite were done by Fourier-transform Raman spectroscopy (baseline, after 7 and 14 days). The data were subjected to multifactor analysis of variance (ANOVA) at a 95% confidence followed by Tukey's HSD post-hoc test. The DC ranged from 58.0% (Halogen) to 59.3% (LED) without significance. Differences in the peak area between LCUs were found after 7 days of storage in S and PT. A marked increase in the peak intensity of HLC and LLC groups was found. The soft-start light-activation may influence the chemical degradation of organic matrix in resin composite. Ethanol contained in Listerine® Cool Mint mouthwash had the most significant degradation effect. Raman spectroscopy is shown to be a useful tool to investigate resin composite degradation.

  6. Caries-resistant bonding layer in dentin.

    Science.gov (United States)

    Zhou, Wei; Niu, Li-Na; Hu, Lin; Jiao, Kai; Chang, Gang; Shen, Li-Juan; Tay, Franklin R; Chen, Ji-Hua

    2016-09-07

    The present study examined the mechanism for caries resistance and the pulp responses in vital teeth following the use of the augmented-pressure adhesive displacement technique. Dentin adhesives were applied to the surface of sound dentin disks in 4 experimental groups: non-antibacterial adhesive and gentle adhesive displacement (N-G), non-antibacterial adhesive and augmented-pressure adhesive displacement (N-H), antibacterial adhesive and gentle adhesive displacement (A-G), antibacterial adhesive and augmented-pressure adhesive displacement (A-H). The depth of demineralization induced by biological or chemical demineralization models was measured using confocal laser scanning microscopy and analyzed with two-way ANOVA. Pulp responses of vital dog's teeth to the augmented-pressure adhesive displacement technique were evaluated using light microscopy. Depth of demineralization was significantly affected by "adhesive type" and "intensity of adhesive displacement" for biological demineralization. For chemical demineralization, only "intensity of adhesive displacement" showed significant influence on lesion depth. Pulp response of 0.1, 0.2 and 0.3 MPa groups showed only moderate disorganization of the odontoblast layer at 24 hours that completely re-organized after 3 weeks. Augmented-pressure adhesive displacement improves the caries resistance property of bonded dentin and does not cause irreversible pulpal damage to vital teeth when the air pressure employed is equal or smaller than 0.3 MPa.

  7. Matrix protected organic matter in a river dominated margin: A possible mechanism to sequester terrestrial organic matter?

    Science.gov (United States)

    Mead, Ralph N.; Goñi, Miguel A.

    2008-06-01

    The provenance of organic matter in surface sediments from the northern Gulf of Mexico was investigated by analyzing the compositions of lipid biomarkers ( n-alkanes, fatty acids, sterols) liberated after a series of chemical treatments designed to remove different organo-mineral matrix associations (i.e. freely extractable, base-hydrolyzable, unhydrolyzable). Bulk analyses of the organic matter (carbon content, carbon:nitrogen ratios, stable and radiocarbon isotopic analyses) were also performed on the intact sediments and their non-hydrolyzable, demineralized residue. We found recognizable lipids from distinct sources, including terrestrial vascular plants, bacteria and marine algae and zooplankton, within each of the isolated fractions. Based on the lipid signatures and bulk compositions, the organic matter within the unhydrolyzable fractions appeared to be the most diagenetically altered, was the oldest in age, and had the highest abundance of terrigenous lipids. In contrast, the base-hydrolyzable fraction was the most diagentically unaltered, had the youngest ages and was most enriched in N and marine lipids. Our results indicate that fresh, autochthonous organic matter is the most important contributor to base-hydrolyzable lipids, whereas highly altered allochthonous sources appear to be predominant source of unhydrolyzable lipids in the surface sediments from the Atchafalaya River shelf. Overall, the lipid biomarker signatures of intact sediments were biased towards the autochthonous source because many of the organic compounds indicative of degraded, terrigenous sources were protected from extraction and saponification by organo-mineral matrices. It is only after these protective matrices were removed by treatment with HCl and HF that these compounds became evident.

  8. Application of variational reduced-density-matrix theory to organic molecules.

    Science.gov (United States)

    Gidofalvi, Gergely; Mazziotti, David A

    2005-03-01

    Variational calculation of the two-electron reduced-density matrix (2-RDM), using a new first-order algorithm [D. A. Mazziotti, Phys. Rev. Lett. 93, 213001 (2004)], is applied to medium-sized organic molecules. The calculations reveal systematic trends in the accuracy of the energy with well-known chemical concepts such as hybridization, electronegativity, and atomic size. Furthermore, correlation energies from hydrocarbon chains indicate that the calculation of the 2-RDM subject to two-positivity conditions is size extensive, that is, the energy grows linearly with the number of electrons. Because organic molecules have a well-defined set of functional groups, we employ the trends in energy accuracy of the functional groups to design a correction to the 2-RDM energy for an arbitrary organic molecule. We apply the 2-RDM calculations with the functional-group correction to a large set of organic molecules with different functional groups. Energies with millihartree accuracy are obtained both at equilibrium and nonequilibrium geometries.

  9. The effects of current dentinal adhesives on the dentinal surface.

    Science.gov (United States)

    Chappell, R P; Spencer, P; Eick, J D

    1994-12-01

    The effects of the dentinal surface treatments from six currently available commercial dentinal adhesives are presented. The adhesives are All-Bond 2, etched and unetched, Syntac, Prisma Universal Bond 3, Scotchbond Multipurpose, Tenure Solution, and Adhesive By Choice. Unerupted third molar human teeth were sectioned and treated with the appropriate adhesive according to the manufacturer's directions. After the teeth were treated, they were processed for observation by scanning electron microscopy. Scanning-electron microscopic photomicrographs were made of each step in the process to show the effects of the constituents, including the adhesives, on the dentinal surface. For All-Bond 2, unetched, the smear layer was not removed before the primer and the adhesive were applied. The primer for Prisma Universal Bond 3 altered the smear layer by reacting with it but did not produce a large demineralized zone in the dentin. All the other adhesives did remove the smear layer before the tooth was treated with the primer and adhesive.

  10. Fish otolith biomineralization process: first investigations about organic matrix and growth of Triglidae (Scorpaeniformes otoliths

    Directory of Open Access Journals (Sweden)

    Stefano Montanini

    2015-11-01

    Full Text Available Otolith formation involves rhythmic variations in the deposition and size of organic matrix framework and carbonate crystals, resulting in the formation of macroscopic translucent and opaque rings and microscopic zonations (growth increments (Morales Nin, 2000. As in most biominerals, the otolith matrix forms only 2-3 % of its weight, but it is admitted that it has a considerable importance in the otolith crystallization processes of nucleation, growth, orientation and growth control. The goal of this study is to characterize the matrix protein composition in the otoliths of Triglidae (Scorpaeniformes as a first step to understand molecular mechanisms of otolith formation according to biology and ecology of the species. In particular 500 sagittal otoliths from six gurnard species were analysed: Chelidonichthys cuculus, C. lucerna, Eutrigla gurnardus, Lepidotrigla cavillone, L. dieuzeidei and Trigloporus lastoviza. Protein contents were estimated by Bradford method and the urea 8 M extracts were loaded into a polyacrylamide gel, separated by SDS page and detected by Silver staining (Sigma followed the protocol of Borelli et al. (2001 with some modifications regarding protein precipitation that was enhanced by using TCA, trichloroacetic acid, 100% w/v. The urea soluble fractions revealed a unique large band around 50-55 kDa. Another common clear band was visible at the top of the separating gel (proteins >300/350 kDa unable to enter into the pores of polyacrylamide gels (12%. The complexity of the protein mixtures was investigated by 2-D electrophoresis (Gel TGX 4-20%; proteins were separated on the basis of both isoelectric point (pI and molecular size. A common protein pattern of 50-75 kDa were found in all gurnards showing a similar composition of organic matter even if the 2-D maps of otolith samples showed specie-specific variation in acid protein fractions in all the pairwise comparison. This result confirmed that the amino acid composition

  11. Organic matrix based slow release fertilizer enhances plant growth, nitrate assimilation and seed yield of Indian mustard (Brassica juncea L.).

    Science.gov (United States)

    Sharma, Vinod K; Singh, Rana P

    2011-09-01

    Field experiments were conducted to study the effect of organic matrix based slow release fertilizers (SRFs) on plant growth, nitrate assimilation and seed yield of Brassica juncea L. cv, pusa bold. The agro-waste materials like cow dung, clay soil, neem leaves and rice bran were mixed together in 2:2:1:1 ratio and used as organic matrix for the immobilization of chemical fertilizer nutrients with commercial grade saresh (Acacia gum, 15% solution) as binder. Different fertilizer treatments were organic matrix based slow release fertilizers, SRF-I (542.0 kg ha(-1)); SRF-II (736.5 kg ha(-1)) and chemical fertilizer combinations, boron (3 kg ha(-1))+sulphur (15 kg ha(-1))+nitrogen (80 kg ha(-1)) and boron (3 kg ha(-1)) + sulphur (15 kg ha(-1))+nitrogen (80 kg ha(-1))+phosphorus (15 kg ha(-1))+potassium (100 kg ha(-1)). Organic matrix based SRF-II released ammonium up to 50-d in wetsoil under laboratory conditions which showed maximum retention of the nutrients. Avery significant increase in plant growth, nitrate assimilation and seed yield was recorded in organic matrix based SRF-II applied plants. The maximum percent increase in biomass production was observed with organic matrix based SRF-II (increase of 65.8% in root fresh weight, 38.0% in root dry weight, 45.9% in leaf fresh weight plant(-1) and 27.5 % in leaf dry weight plant(-1) in 60-d old plants). It also increased the acquisition and assimilation of nitrate from the plant's rhizosphere which was evident by 45.6% increase in nitrate, 27.5% in nitrite and 11.7% in nitrate reductase activity (NRA) in leaves of 45-d old plants over control. The organic matrix based SRF-II significantly increased the seed yield by 28% in Indian mustard. Cost analysis revealed thatthis formulation is cost effective as it is based on agro waste materials.

  12. Architecture of the organic matrix in the sternal CaCO3 deposits of Porcellio scaber (Crustacea, Isopoda).

    Science.gov (United States)

    Fabritius, Helge; Walther, Paul; Ziegler, Andreas

    2005-05-01

    Before the molt terrestrial isopods resorb calcium from the posterior cuticle and store it in large deposits within the first four anterior sternites. In Porcellio scaber the deposits consist of three structurally distinct layers consisting of amorphous CaCO3 (ACC) and an organic matrix that consists of concentric and radial elements. It is thought that the organic matrix plays a role in the structural organization of deposits and in the stabilization of ACC, which is unstable in vitro. In this paper, we present a thorough analysis of the ultrastructure of the organic matrix in the CaCO3 deposits using high-resolution field-emission scanning electron microscopy. The spherules and the homogeneous layer contain an elaborate organic matrix with similar structural organization consisting of concentric reticules and radial strands. The decalcification experiments reveal an inhomogeneous solubility of ACC within the spherules probably caused by variations in the stabilizing properties of matrix components. The transition between the three layers can be explained by changes in the number of spherule nucleation sites.

  13. Monitoring organic loading to swimming pools by fluorescence excitation–emission matrix with parallel factor analysis (PARAFAC)

    DEFF Research Database (Denmark)

    Seredynska-Sobecka, Bozena; Stedmon, Colin; Boe-Hansen, Rasmus

    2011-01-01

    Fluorescence Excitation–Emission Matrix spectroscopy combined with parallel factor analysis was employed to monitor water quality and organic contamination in swimming pools. The fluorescence signal of the swimming pool organic matter was low but increased slightly through the day. The analysis...... loading in swimming pool water. The fluorescence at 420nm gradually increased during opening hours and represented material accumulating through the day....

  14. Carious dentine removal: current approach

    Directory of Open Access Journals (Sweden)

    Germana Coeli de Farias Sales

    2008-01-01

    Full Text Available Dentistry is renewed day after day through the results of qualified researches. The approach as regards carious dentin removal is goingthrough questioning and innovation. The scope of this study was to perform a literature review in the sense of elucidating questions pertaining to the problem of whether or not it is necessary to completely remove carious dentin, and the possibility of performing restoration in a single session, in addition to a discussion about which type of material should be applied in this type of substrate. After analyzing the referenced articles, it was concluded that the stepwise treatment controls caries progression; there is a trend in the literature to partially remove the carious dentin in deep lesions and perform definitive restoration; Calcium hydroxide cement is a classical liner in these situations, while glass ionomer cement and resinous materials are other possibilities of materials that can be in close contact with the remaining dentin.

  15. Evolution of nacre: biochemistry and proteomics of the shell organic matrix of the cephalopod Nautilus macromphalus.

    Science.gov (United States)

    Marie, Benjamin; Marin, Frédéric; Marie, Arul; Bédouet, Laurent; Dubost, Lionel; Alcaraz, Gérard; Milet, Christian; Luquet, Gilles

    2009-06-15

    In mollusks, one of the most widely studied shell textures is nacre, the lustrous aragonitic layer that constitutes the internal components of the shells of several bivalves, a few gastropods,and one cephalopod: the nautilus. Nacre contains a minor organic fraction, which displays a wide range of functions in relation to the biomineralization process. Here, we have biochemically characterized the nacre matrix of the cephalopod Nautilus macromphalus. The acid-soluble matrix contains a mixture of polydisperse and discrete proteins and glycoproteins, which interact with the formation of calcite crystals. In addition, a few bind calcium ions. Furthermore, we have used a proteomic approach,which was applied to the acetic acid-soluble and -insoluble shell matrices, as well as to spots obtained after 2D gel electrophoresis. Our data demonstrate that the insoluble and soluble matrices, although different in their bulk monosaccharide and amino acid compositions, contain numerous shared peptides. Strikingly, most of the obtained partial sequences are entirely new. A few only partly match with bivalvian nacre proteins.Our findings have implications for knowledge of the long-term evolution of molluskan nacre matrices.

  16. Cellular morphology of organic-inorganic hybrid foams based on alkali alumino-silicate matrix

    Energy Technology Data Exchange (ETDEWEB)

    Verdolotti, Letizia; Capasso, Ilaria; Lavorgna, Marino [Institute of Composite and Biomedical Materials, National Research Council, Naples (Italy); Liguori, Barbara; Caputo, Domenico [Department of Chemical, Materials and Industrial Engineering, University of Naples Federico II, Naples (Italy); Iannace, Salvatore [Institute of Composite and Biomedical Materials, National Research Council, Naples, Italy and IMAST SCRAL, Piazza Bovio 22 Napoli 80133 (Italy)

    2014-05-15

    Organic-inorganic hybrid foams based on an alkali alumino-silicate matrix were prepared by using different foaming methods. Initially, the synthesis of an inorganic matrix by using aluminosilicate particles, activated through a sodium silicate solution, was performed at room temperature. Subsequently the viscous paste was foamed by using three different methods. In the first method, gaseous hydrogen produced by the oxidization of Si powder in an alkaline media, was used as blowing agent to generate gas bubbles in the paste. In the second method, the porous structure was generated by mixing the paste with a “meringue” type of foam previously prepared by whipping, under vigorous stirring, a water solution containing vegetal proteins as surfactants. In the third method, a combination of these two methods was employed. The foamed systems were consolidated for 24 hours at 40°C and then characterized by FTIR, X-Ray diffraction, scanning electron microscopy (SEM) and compression tests. Low density foams (∼500 Kg/m{sup 3}) with good cellular structure and mechanical properties were obtained by combining the “meringue” approach with the use of the chemical blowing agent based on Si.

  17. Characterization of organic matrix components of pearl oyster ,Pinctada fucata and their implications in shell formation

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Mollusks make their shells by biomineralization using Ca2+ and CO32- from natural environment.In molluscan shells,two types of CaCO3 crystal which are aragonite and calcite form the species-dependent microstructures.It is believed that shell organic matrices act for control of the crystal types and microstructures.Shell of Pinetada fucata is divided into aragonitic nacreous layer and calcitic prismtic layer.In the recent years,several novel matrix components have been identified in pearl oyster shells by subsequent solubilization of the insoluble matrix,even in the nacreous layer which abounds in the data.In them,we focused our attention on a component,of which the N-terminal amino acid sequence was determined,and attempted cloning genes encoding it.As a result,several clones with typical sequence for the ORF (open reading frame) region were identified and the amino acid sequences were deduced.Further analysis of northern hybridization clarified the tissue specific expressions of the transcripts of the identified genes.

  18. Functional remineralization of carious dentin

    Science.gov (United States)

    Pugach, Megan Kardon

    A primary goal of dental tissue engineering is the biological reconstruction of tooth substrate destroyed by caries or other diseases affecting tooth mineralization. Traditionally, dentists treat caries by using invasive techniques to remove the diseased dental tissue and restore the lesion, ideally preventing further progression of decay. Success in strategies associated with remineralization of enamel and root caries have contributed to the less invasive prospect of remineralization of dentinal carious lesions. The central hypothesis of this dissertation is that carious dentin lesions can be remineralized if the lesions contain residual mineral. Caries Detector (CD) stained zones (pink, light pink, transparent and normal) of arrested carious dentin lesions were characterized according to microstructure by atomic force microscopy (AFM) imaging, mineral content by digital transverse microradiography, and nanomechanical properties by AFM-based nanoindentation. CD-stained and unstained zones had significantly different microstructure, mineral content and nanomechanical properties. Furthermore, the most demineralized carious zone contained residual mineral. To obtain reproducible, standardized dentin caries lesions, we characterized the lesions from an artificial carious dentin lesion model using a 0.05M acetate demineralization buffer. The artificial caries-like lesions produced by the buffer had similar mineral content and nanomechanical properties in the stained and unstained zones as natural dentin lesions. Both natural and artificial lesions had significant correlations between mineral content and nanomechanical properties. Mineral crystallite size and shape was examined by small angle x-ray scattering. Both natural and artificial carious dentin had different mineral sizes than normal dentin. Collagen in natural and artificial carious dentin lesions was examined by trichrome stain, AFM high-resolution imaging, and UV resonance Raman spectroscopy, to determine if

  19. Colorimetric characterization models based on colorimetric characteristics evaluation for active matrix organic light emitting diode panels.

    Science.gov (United States)

    Gong, Rui; Xu, Haisong; Tong, Qingfen

    2012-10-20

    The colorimetric characterization of active matrix organic light emitting diode (AMOLED) panels suffers from their poor channel independence. Based on the colorimetric characteristics evaluation of channel independence and chromaticity constancy, an accurate colorimetric characterization method, namely, the polynomial compensation model (PC model) considering channel interactions was proposed for AMOLED panels. In this model, polynomial expressions are employed to calculate the relationship between the prediction errors of XYZ tristimulus values and the digital inputs to compensate the XYZ prediction errors of the conventional piecewise linear interpolation assuming the variable chromaticity coordinates (PLVC) model. The experimental results indicated that the proposed PC model outperformed other typical characterization models for the two tested AMOLED smart-phone displays and for the professional liquid crystal display monitor as well.

  20. Novel Digital Driving Method Using Dual Scan for Active Matrix Organic Light-Emitting Diode Displays

    Science.gov (United States)

    Jung, Myoung Hoon; Choi, Inho; Chung, Hoon-Ju; Kim, Ohyun

    2008-11-01

    A new digital driving method has been developed for low-temperature polycrystalline silicon, transistor-driven, active-matrix organic light-emitting diode (AM-OLED) displays by time-ratio gray-scale expression. This driving method effectively increases the emission ratio and the number of subfields by inserting another subfield set into nondisplay periods in the conventional digital driving method. By employing the proposed modified gravity center coding, this method can be used to effectively compensate for dynamic false contour noise. The operation and performance were verified by current measurement and image simulation. The simulation results using eight test images show that the proposed approach improves the average peak signal-to-noise ratio by 2.61 dB, and the emission ratio by 20.5%, compared with the conventional digital driving method.

  1. Thermal analysis of high intensity organic light-emitting diodes based on a transmission matrix approach

    Science.gov (United States)

    Qi, Xiangfei; Forrest, Stephen R.

    2011-12-01

    We use a general transmission matrix formalism to determine the thermal response of organic light-emitting diodes (OLEDs) under high currents normally encountered in ultra-bright illumination conditions. This approach, based on Laplace transforms, facilitates the calculation of transient coupled heat transfer in a multi-layer composite characteristic of OLEDs. Model calculations are compared with experimental data on 5 cm × 5 cm green and red-emitting electrophosphorescent OLEDs under various current drive conditions. This model can be extended to study other complex optoelectronic structures under a wide variety of conditions that include heat removal via conduction, radiation, and convection. We apply the model to understand the effects of using high-thermal- conductivity substrates, and the transient thermal response under pulsed-current operation.

  2. Driving technology for improving motion quality of active-matrix organic light-emitting diode display

    Science.gov (United States)

    Kim, Jongbin; Kim, Minkoo; Kim, Jong-Man; Kim, Seung-Ryeol; Lee, Seung-Woo

    2014-09-01

    This paper reports transient response characteristics of active-matrix organic light emitting diode (AMOLED) displays for mobile applications. This work reports that the rising responses look like saw-tooth waveform and are not always faster than those of liquid crystal displays. Thus, a driving technology is proposed to improve the rising transient responses of AMOLED based on the overdrive (OD) technology. We modified the OD technology by combining it with a dithering method because the conventional OD method cannot successfully enhance all the rising responses. Our method can improve all the transitions of AMOLED without modifying the conventional gamma architecture of drivers. A new artifact is found when OD is applied to certain transitions. We propose an optimum OD selection method to mitigate the artifact. The implementation results show the proposed technology can successfully improve motion quality of scrolling texts as well as moving pictures in AMOLED displays.

  3. Analysis of the proteinaceous components of the organic matrix of calcitic sclerites from the soft coral Sinularia sp.

    Science.gov (United States)

    Rahman, M Azizur; Shinjo, Ryuichi; Oomori, Tamotsu; Wörheide, Gert

    2013-01-01

    An organic matrix consisting of a protein-polysaccharide complex is generally accepted as an important medium for the calcification process. While the role this "calcified organic matrix" plays in the calcification process has long been appreciated, the complex mixture of proteins that is induced and assembled during the mineral phase of calcification remains uncharacterized in many organisms. Thus, we investigated organic matrices from the calcitic sclerites of a soft coral, Sinularia sp., and used a proteomic approach to identify the functional matrix proteins that might be involved in the biocalcification process. We purified eight organic matrix proteins and performed in-gel digestion using trypsin. The tryptic peptides were separated by nano-liquid chromatography (nano-LC) and analyzed by tandem mass spectrometry (MS/MS) using a matrix-assisted laser desorption/ionization (MALDI) - time-of-flight-time-of-flight (TOF-TOF) mass spectrometer. Periodic acid Schiff staining of an SDS-PAGE gel indicated that four proteins were glycosylated. We identified several proteins, including a form of actin, from which we identified a total of 183 potential peptides. Our findings suggest that many of those peptides may contribute to biocalcification in soft corals.

  4. Analysis of the proteinaceous components of the organic matrix of calcitic sclerites from the soft coral Sinularia sp.

    Directory of Open Access Journals (Sweden)

    M Azizur Rahman

    Full Text Available An organic matrix consisting of a protein-polysaccharide complex is generally accepted as an important medium for the calcification process. While the role this "calcified organic matrix" plays in the calcification process has long been appreciated, the complex mixture of proteins that is induced and assembled during the mineral phase of calcification remains uncharacterized in many organisms. Thus, we investigated organic matrices from the calcitic sclerites of a soft coral, Sinularia sp., and used a proteomic approach to identify the functional matrix proteins that might be involved in the biocalcification process. We purified eight organic matrix proteins and performed in-gel digestion using trypsin. The tryptic peptides were separated by nano-liquid chromatography (nano-LC and analyzed by tandem mass spectrometry (MS/MS using a matrix-assisted laser desorption/ionization (MALDI - time-of-flight-time-of-flight (TOF-TOF mass spectrometer. Periodic acid Schiff staining of an SDS-PAGE gel indicated that four proteins were glycosylated. We identified several proteins, including a form of actin, from which we identified a total of 183 potential peptides. Our findings suggest that many of those peptides may contribute to biocalcification in soft corals.

  5. Lipocalins Are Required for Apical Extracellular Matrix Organization and Remodeling in Caenorhabiditis elegans.

    Science.gov (United States)

    Forman-Rubinsky, Rachel; Cohen, Jennifer D; Sundaram, Meera V

    2017-08-25

    A lipid and glycoprotein-rich apical extracellular matrix (aECM) or glycocalyx lines exposed membranes in the body, and is particularly important to protect narrow tube integrity. Lipocalins ("fat cups") are small, secreted, cup-shaped proteins that bind and transport lipophilic cargo and are often found in luminal or aECM compartments such as mammalian plasma, urine, or tear film. Although some lipocalins can bind known aECM lipids and/or matrix metalloproteinases, it is not known if and how lipocalins affect aECM structure due to challenges in visualizing the aECM in most systems. Here we show that two C. elegans lipocalins, LPR-1 and LPR-3, have distinct functions in the pre-cuticular glycocalyx of developing external epithelia. LPR-1 moves freely through luminal compartments, while LPR-3 stably localizes to a central layer of the membrane-anchored glycocalyx, adjacent to the transient zona pellucida domain protein LET-653. Like LET-653 and other C. elegans glycocalyx components, these lipocalins are required to maintain the patency of the narrow excretory duct tube, and also affect multiple aspects of later cuticle organization. lpr-1 mutants cannot maintain a continuous excretory duct apical domain and have misshapen cuticle ridges (alae) and abnormal patterns of cuticular surface lipid staining. lpr-3 mutants cannot maintain a passable excretory duct lumen, properly degrade the eggshell, or shed old cuticle during molting, and they lack cuticle barrier function. Based on these phenotypes, we infer that both LPR-1 and LPR-3 are required to build a properly organized aECM, while LPR-3 additionally is needed for aECM clearance and remodeling. The C. elegans glycocalyx provides a powerful system, amenable to both genetic analysis and live imaging, for investigating how lipocalins and lipids impact aECM structure. Copyright © 2017, Genetics.

  6. Regulation of extracellular matrix organization by BMP signaling in Caenorhabditis elegans.

    Directory of Open Access Journals (Sweden)

    Robbie D Schultz

    Full Text Available In mammals, Bone Morphogenetic Protein (BMP pathway signaling is important for the growth and homeostasis of extracellular matrix, including basement membrane remodeling, scarring, and bone growth. A conserved BMP member in Caenorhabditis elegans, DBL-1, regulates body length in a dose-sensitive manner. Loss of DBL-1 pathway signaling also results in increased anesthetic sensitivity. However, the physiological basis of these pleiotropic phenotypes is largely unknown. We created a DBL-1 over-expressing strain and show that sensitivity to anesthetics is inversely related to the dose of DBL-1. Using pharmacological, genetic analyses, and a novel dye permeability assay for live, microwave-treated animals, we confirm that DBL-1 is required for the barrier function of the cuticle, a specialized extracellular matrix. We show that DBL-1 signaling is required to prevent animals from forming tail-entangled aggregates in liquid. Stripping lipids off the surface of wild-type animals recapitulates this phenotype. Finally, we find that DBL-1 signaling affects ultrastructure of the nematode cuticle in a dose-dependent manner, as surface lipid content and cuticular organization are disrupted in animals with genetically altered DBL-1 levels. We propose that the lipid layer coating the nematode cuticle normally prevents tail entanglement, and that reduction of this layer by loss of DBL-1 signaling promotes aggregation. This work provides a physiological mechanism that unites the DBL-1 signaling pathway roles of not only body size regulation and drug responsiveness, but also the novel Hoechst 33342 staining and aggregation phenotypes, through barrier function, content, and organization of the cuticle.

  7. Planar cell polarity proteins differentially regulate extracellular matrix organization and assembly during zebrafish gastrulation.

    Science.gov (United States)

    Dohn, Michael R; Mundell, Nathan A; Sawyer, Leah M; Dunlap, Julie A; Jessen, Jason R

    2013-11-01

    Zebrafish gastrulation cell movements occur in the context of dynamic changes in extracellular matrix (ECM) organization and require the concerted action of planar cell polarity (PCP) proteins that regulate cell elongation and mediolateral alignment. Data obtained using Xenopus laevis gastrulae have shown that integrin-fibronectin interactions underlie the formation of polarized cell protrusions necessary for PCP and have implicated PCP proteins themselves as regulators of ECM. By contrast, the relationship between establishment of PCP and ECM assembly/remodeling during zebrafish gastrulation is unclear. We previously showed that zebrafish embryos carrying a null mutation in the four-pass transmembrane PCP protein vang-like 2 (vangl2) exhibit increased matrix metalloproteinase activity and decreased immunolabeling of fibronectin. These data implicated for the first time a core PCP protein in the regulation of pericellular proteolysis of ECM substrates and raised the question of whether other zebrafish PCP proteins also impact ECM organization. In Drosophila melanogaster, the cytoplasmic PCP protein Prickle binds Van Gogh and regulates its function. Here we report that similar to vangl2, loss of zebrafish prickle1a decreases fibronectin protein levels in gastrula embryos. We further show that Prickle1a physically binds Vangl2 and regulates both the subcellular distribution and total protein level of Vangl2. These data suggest that the ability of Prickle1a to impact fibronectin organization is at least partly due to effects on Vangl2. In contrast to loss of either Vangl2 or Prickle1a function, we find that glypican4 (a Wnt co-receptor) and frizzled7 mutant gastrula embryos with disrupted non-canonical Wnt signaling exhibit the opposite phenotype, namely increased fibronectin assembly. Our data show that glypican4 mutants do not have decreased proteolysis of ECM substrates, but instead have increased cell surface cadherin protein expression and increased intercellular

  8. The application of tissue engineering to regeneration of pulp and dentin in endodontics.

    Science.gov (United States)

    Nakashima, Misako; Akamine, Akifumi

    2005-10-01

    Caries, pulpitis, and apical periodontitis increase health care costs and attendant loss of economic productivity. They ultimately result in premature tooth loss and therefore diminishing the quality of life. Advances in vital pulp therapy with pulp stem/progenitor cells might give impetus to regenerate dentin-pulp complex without the removal of the whole pulp. Tissue engineering is the science of design and manufacture of new tissues to replace lost parts because of diseases including cancer and trauma. The three key ingredients for tissue engineering are signals for morphogenesis, stem cells for responding to morphogens and the scaffold of extracellular matrix. In preclinical studies cell therapy and gene therapy have been developed for many tissues and organs such as bone, heart, liver, and kidney as a means of delivering growth factors, cytokines, or morphogens with stem/progenitor cells in a scaffold to the sites of tissue injury to accelerate and/or induce a natural biological regeneration. The pulp tissue contains stem/progenitor cells that potentially differentiate into odontoblasts in response to bone morphogenetic proteins (BMPs). There are two strategies to regenerate dentin. First, is in vivo therapy, where BMP proteins or BMP genes are directly applied to the exposed or amputated pulp. Second is ex vivo therapy and consists of isolation of stem/progenitor cells from pulp tissue, differentiation into odontoblasts with recombinant BMPs or BMP genes and finally transplanted autogenously to regenerate dentin. This review is focused on the recent progress in this area and discusses the barriers and challenges for clinical utility in endodontics.

  9. Potential Role of Dentin Sialoprotein by Inducing Dental Pulp Mesenchymal Stem Cell Differentiation and Mineralization for Dental Tissue Repair

    Directory of Open Access Journals (Sweden)

    Zhi Chen

    2010-09-01

    Full Text Available Introduction: Dentin sialoprotein (DSP is a dentin extracellular matrix protein, a unique marker of dentinogenesis and plays a vital role in odontoblast differentiation and dentin mineralization. Recently, studies have shown that DSP induces differentiation and mineralization of periodontal ligament stem cells and dental papilla mesenchymal cells in vitro and rescues dentin deficiency and increases enamel mineralization in animal models.The hypothesis: DSP as a nature therapeutic agent stimulates dental tissue repair by inducing endogenous dental pulp mesenchymal stem/progenitor cells into odontoblast-like cells to synthesize and to secrete dentin extracellular matrix forming new tertiary dentin as well as to regenerate a functional dentin-pulp complex. As DSP is a nature protein, and clinical procedure for DSP therapy is easy and simple, application of DSP may provide a new avenue for dentists with additional option for the treatment of substantially damaged vital teeth.Evaluation of the hypothesis: Dental caries is the most common dental disease. Deep caries and pulp exposure have been treated by various restorative materials with limited success. One promising approach is dental pulp stem/progenitor-based therapies to regenerate dentin-pulp complex and restore its functions by DSP induction in vivo.

  10. The Metadistrict as the Territorial Strategy: From Set Theory and a Matrix Organization Model Hypothesis

    Directory of Open Access Journals (Sweden)

    Francesco Contò

    2012-06-01

    Full Text Available The purpose of this proposal is to explore a new concept of 'Metadistrict' to be applied in a region of Southern Italy – Apulia ‐ in order to analyze the impact that the activation of a special network between different sector chains and several integrated projects may have for revitalizing the local economy; an important role is assigned to the network of relationships and so to the social capital. The Metadistrict model stems from the Local Action Groups and the Integrated Projects of Food Chain frameworks. It may represent a crucial driver of the rural economy through the realization of sector circuits connected to the concept of multi‐functionality in agriculture, that is Network of the Territorial Multi‐functionality. It was formalized by making use of a set of theories and of a Matrix Organization Model. The adoption of the Metadistrict perspective as the territorial strategy may play a key role to revitalize the primary sector, through the increase of economic and productive opportunities due to the implementation of a common and shared strategy and organization.

  11. Stretchable active-matrix organic light-emitting diode display using printable elastic conductors

    Science.gov (United States)

    Sekitani, Tsuyoshi; Nakajima, Hiroyoshi; Maeda, Hiroki; Fukushima, Takanori; Aida, Takuzo; Hata, Kenji; Someya, Takao

    2009-06-01

    Stretchability will significantly expand the applications scope of electronics, particularly for large-area electronic displays, sensors and actuators. Unlike for conventional devices, stretchable electronics can cover arbitrary surfaces and movable parts. However, a large hurdle is the manufacture of large-area highly stretchable electrical wirings with high conductivity. Here, we describe the manufacture of printable elastic conductors comprising single-walled carbon nanotubes (SWNTs) uniformly dispersed in a fluorinated rubber. Using an ionic liquid and jet-milling, we produce long and fine SWNT bundles that can form well-developed conducting networks in the rubber. Conductivity of more than 100Scm-1 and stretchability of more than 100% are obtained. Making full use of this extraordinary conductivity, we constructed a rubber-like stretchable active-matrix display comprising integrated printed elastic conductors, organic transistors and organic light-emitting diodes. The display could be stretched by 30-50% and spread over a hemisphere without any mechanical or electrical damage.

  12. Repair of dentin defects from DSPP knockout mice by PILP mineralization

    Science.gov (United States)

    Nurrohman, H.; Saeki, K.; Carneiro, K.; Chien, Y.C.; Djomehri, S.; Ho, S.P.; Qin, C.; Marshall, S.J.; Gower, L.B.; Marshall, G.W.; Habelitz, S.

    2016-01-01

    Dentinogenesis imperfecta type II (DGI-II) lacks intrafibrillar mineral with severe compromise of dentin mechanical properties. A Dspp knockout (Dspp−/−) mouse, with a phenotype similar to that of human DGI-II, was used to determine if poly-L-aspartic acid [poly(ASP)] in the “polymer-induced liquid-precursor” (PILP) system can restore its mechanical properties. Dentin from six-week old Dspp−/− and wild-type mice was treated with CaP solution containing poly(ASP) for up to 14 days. Elastic modulus and hardness before and after treatment were correlated with mineralization from Micro x-ray computed tomography (Micro-XCT). Transmission electron microscopy (TEM)/Selected area electron diffraction (SAED) were used to compare matrix mineralization and crystallography. Mechanical properties of the Dspp−/− dentin were significantly less than wild-type dentin and recovered significantly (P < 0.05) after PILP-treatment, reaching values comparable to wild-type dentin. Micro-XCT showed mineral recovery similar to wild-type dentin after PILP-treatment. TEM/SAED showed repair of patchy mineralization and complete mineralization of defective dentin. This approach may lead to new strategies for hard tissue repair. PMID:27239097

  13. The skeletal organic matrix from Mediterranean coral Balanophyllia europaea influences calcium carbonate precipitation.

    Directory of Open Access Journals (Sweden)

    Stefano Goffredo

    Full Text Available Scleractinian coral skeletons are made mainly of calcium carbonate in the form of aragonite. The mineral deposition occurs in a biological confined environment, but it is still a theme of discussion to what extent the calcification occurs under biological or environmental control. Hence, the shape, size and organization of skeletal crystals from the cellular level through the colony architecture, were attributed to factors as diverse as mineral supersaturation levels and organic mediation of crystal growth. The skeleton contains an intra-skeletal organic matrix (OM of which only the water soluble component was chemically and physically characterized. In this work that OM from the skeleton of the Balanophyllia europaea, a solitary scleractinian coral endemic to the Mediterranean Sea, is studied in vitro with the aim of understanding its role in the mineralization of calcium carbonate. Mineralization of calcium carbonate was conducted by overgrowth experiments on coral skeleton and in calcium chloride solutions containing different ratios of water soluble and/or insoluble OM and of magnesium ions. The precipitates were characterized by diffractometric, spectroscopic and microscopic techniques. The results showed that both soluble and insoluble OM components influence calcium carbonate precipitation and that the effect is enhanced by their co-presence. The role of magnesium ions is also affected by the presence of the OM components. Thus, in vitro, OM influences calcium carbonate crystal morphology, aggregation and polymorphism as a function of its composition and of the content of magnesium ions in the precipitation media. This research, although does not resolve the controversy between environmental or biological control on the deposition of calcium carbonate in corals, sheds a light on the role of OM, which appears mediated by the presence of magnesium ions.

  14. Effectiveness of simplified dentin bonding systems.

    Science.gov (United States)

    Imai, T; Itoh, K; Tani, C; Manabe, A; Yamashita, T; Hisamitsu, H; Wakumoto, S

    1998-03-01

    The effectiveness of newly developed commercial dentin bonding systems (SB, MB II and KB) was evaluated by measuring the contraction gap width of a resin composite restored into a cylindrical dentin cavity prepared in an extracted human molar and by measuring the tensile bond strength to the flat dentin surface. In addition, calcium loss during dentin conditioning was analyzed using electron microanalyses. An experimental dentin bonding system composed of EDTA conditioning, GM solution priming and a bonding agent containing 10-MDP was employed as a control in which it was presumed that contraction gap formation was prevented completely. However, gap formation was observed using the three commercial simplified dentin bonding systems. SEM observation showed that the gap was formed between the resin composite and the top surface of the dentin cavity wall indicating that the fracture occurred at the adhesive interface, but never inside the dentin nor inside the resin composite.

  15. New Advanced Materials for High Performance at the Resin-Dentine Interface.

    Science.gov (United States)

    Toledano, Manuel; Osorio, Raquel

    2015-01-01

    This chapter provides a tool for the integration of new concepts and biomaterials related with the resin-dentine interface. The principles of dentine demineralisation and remineralisation that shape modern restorative dentistry practices, as well as considerations for the selection of new materials for different restorative approaches, are emphasised. Re-incorporation of mineral into the demineralised dentine matrix is important since the mineral precipitated may work as a constant site for further nucleation, and the remineralised subsurface of the tissue may be more resistant to subsequent acid attack. This deposition of minerals may be due to both spontaneous precipitation induced by local supersaturation of Ca and P in the presence of non-specific tissue alkaline phosphatase or through heterogeneous nucleation sites provided by phosphoproteins within the dentine collagen matrix. Nucleation is a multistep process involving both protein and mineral transition and suggests a temporally synchronised process. Dentine provides both structural and chemical frameworks, acting as a scaffold for mineral deposition at specific sites. The ultimate goal in the design and improvement of new materials for high performance at the resin-dentine interface is to render a stronger and durable adhesion to dental tissues despite the severe conditions in the oral environment. In the present chapter, glass ionomers, calcium-phosphate cements and doped dental adhesives have been selected to represent the cutting edge biomaterials at the interface. © 2015 S. Karger AG, Basel.

  16. The effects of spaceflight on the mineralization of rat incisor dentin

    Science.gov (United States)

    Simmons, D. J.; Rosenberg, G. D.

    1984-01-01

    Specific effects of space flight on dentin formation on the lower incisors of male rats were determined. Data were Fourier analyzed to determine the spectra of chemical growth rhythms. It was found that Calcium and P were more concentrated in the newly forming dentin of the Flight rats than in comparable regions of control tissues. There was no significant difference in the mean S-concentration between the two groups, but the pattern of S-distribution in the recently formed dentin from the Flight rats was different from that in the control group. Sulfur fluctuations in flight animals periodically peak above the irregular background fluctuations, but there are no comparable sulfur peaks across the dentin in the control. It is indicated that spaceflight has measurable effects on dentinogenesis, and may also bear on the problem of the regulatory role of proteoglycans in mineralization and the maturation of mineral and matrix moieties in skeletal tissue.

  17. Screening metal-organic framework-based mixed-matrix membranes for CO2/CH4 separations

    OpenAIRE

    Keskin, Seda; Eruçar, İlknur

    2011-01-01

    1 Screening Metal Organic Framework-based Mixed Matrix Membranes for CO2/CH4 Separations Ilknur Erucar† and Seda Keskin‡* †Department of Computational Sciences and Engineering, Koç University, 34450, Istanbul, Turkey ‡Department of Chemical and Biological Engineering, Koç University, 34450, Istanbul, Turkey Submitted to Ind. Eng. Chem. Res. Abstract In this study, the challenge of selecting metal organic frameworks (MOFs) as filler particles in high performance mixe...

  18. Exact matrix treatment of an osmotic ensemble model of adsorption and pressure induced structural transitions in metal organic frameworks.

    Science.gov (United States)

    Dunne, Lawrence J; Manos, George

    2016-03-14

    Here we present an exactly treated quasi-one dimensional statistical mechanical osmotic ensemble model of pressure and adsorption induced breathing structural transformations of metal-organic frameworks (MOFs). The treatment uses a transfer matrix method. The model successfully reproduces the gas and pressure induced structural changes which are observed experimentally in MOFs. The model treatment presented here is a significant step towards analytical statistical mechanical treatments of flexible metal-organic frameworks.

  19. The strength of a calcified tissue depends in part on the molecular structure and organization of its constituent mineral crystals in their organic matrix

    Science.gov (United States)

    Landis, W. J.

    1995-01-01

    High-voltage electron-microscopic tomographic (3D) studies of the ultrastructural interaction between mineral and organic matrix in a variety of calcified tissues reveal different crystal structural and organizational features in association with their respective organic matrices. In brittle or weak pathologic or ectopic calcifications, including examples of osteogenesis imperfecta, calciphylaxis, calcergy, and dermatomyositis, hydroxyapatite crystals occur in various sizes and shapes and are oriented and aligned with respect to collagen in a manner which is distinct from that found in normal calcified tissues. A model of collagen-mineral interaction is proposed which may account for the observed crystal structures and organization. The results indicate that the ultimate strength, support, and other mechanical properties provided by a calcified tissue are dependent in part upon the molecular structure and arrangement of its constituent mineral crystals within their organic matrix.

  20. The strength of a calcified tissue depends in part on the molecular structure and organization of its constituent mineral crystals in their organic matrix

    Science.gov (United States)

    Landis, W. J.

    1995-01-01

    High-voltage electron-microscopic tomographic (3D) studies of the ultrastructural interaction between mineral and organic matrix in a variety of calcified tissues reveal different crystal structural and organizational features in association with their respective organic matrices. In brittle or weak pathologic or ectopic calcifications, including examples of osteogenesis imperfecta, calciphylaxis, calcergy, and dermatomyositis, hydroxyapatite crystals occur in various sizes and shapes and are oriented and aligned with respect to collagen in a manner which is distinct from that found in normal calcified tissues. A model of collagen-mineral interaction is proposed which may account for the observed crystal structures and organization. The results indicate that the ultimate strength, support, and other mechanical properties provided by a calcified tissue are dependent in part upon the molecular structure and arrangement of its constituent mineral crystals within their organic matrix.

  1. Detection of root resorption using dentin and bone markers.

    Science.gov (United States)

    George, A; Evans, C A

    2009-08-01

    OBJECTIVES - To test the hypothesis that during root resorption, organic matrix proteins and cytokines from the surrounding bone and dentin are released into the gingival crevice. MATERIAL AND METHODS - Subjects with mild (resorption (>2 mm) were identified. Control group subjects with no loss of root structure or undergoing orthodontic treatment were also identified. Gingival crevicular fluid (GCF) was collected non-invasively from the mesial and distal sides of each of the four upper incisors by using filter paper strips. The eluted GCF was used for analysis using western blot and enzyme-linked immunosorbent assay (ELISA) techniques. Antibodies used were against osteopontin (OPN), (osteoprotegerin) OPG, and receptor activator of nuclear factor kappa B ligand (RANKL). RESULTS - Western blot analysis showed differential expression of OPN, OPG, and RANKL in the control and root resorbed subjects. However, processed forms of these proteins were only observed in the root resorbed subjects. Results from ELISA with OPG antibodies revealed a difference in OPG concentration between the control and root resorption groups. ELISA results with RANKL antibodies did show a statistically significant difference between the control group and the two study groups. The ratio RANKL/OPG was statistically higher in subjects with severe root resorption than in the control subjects. CONCLUSIONS - Preliminary results confirm the presence of matrix proteins and cytokines in the GCF of root resorbed subjects. Further, OPG was locally present in excess amounts over RANKL and an increased RANKL/OPG in the study groups could be correlated with an increased bone resorption activity during orthodontic tooth movement.

  2. Fluorescence Excitation-Emission Matrix Regional Integration to Quantify Spectra for Dissolved Organic Matter

    Science.gov (United States)

    Chen, W.; Westerhoff, P.; Leenheer, J.A.; Booksh, K.

    2003-01-01

    Excitation-emission matrix (EEM) fluorescence spectroscopy has been widely used to characterize dissolved organic matter (DOM) in water and soil. However, interpreting the >10,000 wavelength-dependent fluorescence intensity data points represented in EEMs has posed a significant challenge. Fluorescence regional integration, a quantitative technique that integrates the volume beneath an EEM, was developed to analyze EEMs. EEMs were delineated into five excitation-emission regions based on fluorescence of model compounds, DOM fractions, and marine waters or freshwaters. Volumetric integration under the EEM within each region, normalized to the projected excitation-emission area within that region and dissolved organic carbon concentration, resulted in a normalized region-specific EEM volume (??i,n). Solid-state carbon nuclear magnetic resonance (13C NMR), Fourier transform infrared (FTIR) analysis, ultraviolet-visible absorption spectra, and EEMs were obtained for standard Suwannee River fulvic acid and 15 hydrophobic or hydrophilic acid, neutral, and base DOM fractions plus nonfractionated DOM from wastewater effluents and rivers in the southwestern United States. DOM fractions fluoresced in one or more EEM regions. The highest cumulative EEM volume (??T,n = ????i,n) was observed for hydrophobic neutral DOM fractions, followed by lower ??T,n values for hydrophobic acid, base, and hydrophilic acid DOM fractions, respectively. An extracted wastewater biomass DOM sample contained aromatic protein- and humic-like material and was characteristic of bacterial-soluble microbial products. Aromatic carbon and the presence of specific aromatic compounds (as indicated by solid-state 13C NMR and FTIR data) resulted in EEMs that aided in differentiating wastewater effluent DOM from drinking water DOM.

  3. Proteins from the organic matrix of core-top and fossil planktonic foraminifera

    Science.gov (United States)

    Robbins, L. L.; Brew, K.

    1990-08-01

    Organic constituents isolated from the tests (shells) of six species of core-top planktonic foraminifera, ranging in age between 2 and 4 Ka BP, consist of a heterogeneous mixture of proteins and polypeptides. At least seven discrete polypeptides are present as indicated by reverse phase HPLC and by gel electrophoresis. High percentages of aspartic acid and glutamic acid characterize one class of protein, while glycine, serine, and alanine-rich proteins dominate in a second class. Similar HPLC Chromatographie elution profiles are observed for all species analyzed, varying only in intensity of the peaks and in amino acid composition from species to species. The approximate molecular weights of two major fossil proteins ranged between 50,000 and 70,000 daltons. A comparison of 2-4 and 300 Ka Bp samples shows that while most of the polypeptides are present in both samples, some acidic polypeptides are not present in the older sample. These data suggest that some of the acidic polypeptides may be more soluble than other fractions and are lost more quickly from the test. The remaining hydrophobic, possibly more insoluble, polypeptides may be preserved in much older specimens and may be useful in tracing phylogeny of the planktonic foraminifera. Amino acid analyses of total test extracts before and after dialysis demonstrate that some acidic amino acids, particularly aspartic acid, and possibly peptides less than 6000-8000 daltons are lost during dialysis. Although a large percentage of these components are undoubtedly from the original organic matrix, at this point adsorbed components cannot be ruled out. These data caution against the use of total amino acid compositions in biogeochemical studies.

  4. The quantitative nuclear matrix proteome as a biochemical snapshot of nuclear organization.

    Science.gov (United States)

    Engelke, Rudolf; Riede, Julia; Hegermann, Jan; Wuerch, Andreas; Eimer, Stefan; Dengjel, Joern; Mittler, Gerhard

    2014-09-05

    The nuclear matrix (NM) is an operationally defined structure of the mammalian cell nucleus that resists stringent biochemical extraction procedures applied subsequent to nuclease-mediated chromatin digestion of intact nuclei. This comprises removal of soluble biomolecules and chromatin by means of either detergent (LIS: lithium diiodosalicylate) or high salt (AS: ammonium sulfate, sodium chloride) treatment. So far, progress toward defining bona fide NM proteins has been hindered by the problem of distinguishing them from copurifying abundant contaminants and extraction-method-intrinsic precipitation artifacts. Here, we present a highly improved NM purification strategy, adding a FACS sorting step for efficient isolation of morphologically homogeneous lamin B positive NM specimens. SILAC-based quantitative proteome profiling of LIS-, AS-, or NaCl-extracted matrices versus the nuclear proteome together with rigorous statistical filtering enables the compilation of a high-quality catalogue of NM proteins commonly enriched among the three different extraction methods. We refer to this set of 272 proteins as the NM central proteome. Quantitative NM retention profiles for 2381 proteins highlight elementary features of nuclear organization and correlate well with immunofluorescence staining patterns reported in the Human Protein Atlas, demonstrating that the NM central proteome is significantly enriched in proteins exhibiting a nuclear body as well as nuclear speckle-like morphology.

  5. Active matrix organic light emitting diode (OLED)-XL life test results

    Science.gov (United States)

    Fellowes, David A.; Wood, Michael V.; Hastings, Arthur R., Jr.; Ghosh, Amalkumar P.; Prache, Olivier

    2008-04-01

    OLED displays have been known to exhibit high levels of performance with regards to contrast, response time, uniformity, and viewing angle, but a lifetime improvement has been perceived to be essential for broadening the applications of OLED's in the military and in the commercial market. As a result of this need, the US Army and eMagin Corporation established a Cooperative Research and Development Agreement (CRADA) to improve the lifetime of OLED displays. In 2006, eMagin Corporation developed long-life OLED-XL devices for use in their AMOLED microdisplays for head-worn applications, and RDECOM CERDEC NVESD ran life tests on these displays, finding over 200% lifetime improvement for the XL devices over the standard displays. Early results were published at the 2007 SPIE Defense and Security Symposium. Further life testing of XL and standard devices at ambient conditions and at high temperatures will be presented this year along with a recap of previous data. This should result in a better understanding of the applicability of AMOLEDs in military and commercial head mounted systems: where good fits are made, and where further development might be needed. This is a continuation of the paper "Life test results of OLED-XL long-life devices for use in active matrix organic light emitting diode (AMOLED) displays for head mounted applications" presented at SPIE DSS in 2007.

  6. Separated Carbon Nanotube Macroelectronics for Active Matrix Organic Light-Emitting Diode Displays

    Science.gov (United States)

    Fu, Yue; Zhang, Jialu; Wang, Chuan; Chen, Pochiang; Zhou, Chongwu

    2012-02-01

    Active matrix organic light-emitting diode (AMOLED) display holds great potential for the next generation visual technologies due to its high light efficiency, flexibility, lightweight, and low-temperature processing. However, suitable thin-film transistors (TFTs) are required to realize the advantages of AMOLED. Pre-separated, semiconducting enriched carbon nanotubes are excellent candidates for this purpose because of their excellent mobility, high percentage of semiconducting nanotubes, and room-temperature processing compatibility. Here we report, for the first time, the demonstration of AMOLED displays driven by separated nanotube thin-film transistors (SN-TFTs) including key technology components such as large-scale high-yield fabrication of devices with superior performance, carbon nanotube film density optimization, bilayer gate dielectric for improved substrate adhesion to the deposited nanotube film, and the demonstration of monolithically integrated AMOLED display elements with 500 pixels driven by 1000 SN-TFTs. Our approach can serve as the critical foundation for future nanotube-based thin-film display electronics.

  7. A Study of Impact Response of Electrified Organic Matrix Composites (Preprint)

    Science.gov (United States)

    2006-09-01

    temperature across the thickness of the carbon fiber polymer matrix composite plate due to an electric current passing in the carbon fibers. A long...unidirectional carbon fiber polymer matrix composite plate that carries a DC current I in the fiber direction. Assume that the ratio of the thickness, h , to...the minimum temperature, minT , is at the surface, 2z h= ± . Moreover, a strong temperature gradient appears in carbon fiber polymer matrix composite plates

  8. Effect of dentinal tubules and resin-based endodontic sealers on fracture properties of root dentin.

    Science.gov (United States)

    Jainaen, Angsana; Palamara, Joseph E A; Messer, Harold H

    2009-10-01

    To investigate the role of dentinal tubules in the fracture properties of human root dentin and whether resin-filled dentinal tubules can enhance fracture resistance. Crack propagation in human root dentin was investigated in 200 microm thick longitudinal samples and examined by light and scanning electron microscopy. 30 maxillary premolar teeth were prepared for work of fracture (Wf) test at different tubule orientations, one perpendicular and two parallel to dentinal tubules. Another 40 single canal premolars were randomly divided into four groups of 10 each: intact dentin, prepared but unobturated canal, canal obturated with epoxy rein (AH Plus/gutta percha), or with UDMA resin sealer (Resilon/RealSeal. The samples were prepared for Wf test parallel to dentinal tubules. Wf was compared under ANOVA with statistical significance set at pcanal preparation nor obturation using epoxy- or UDMA-based resins as sealer cements substantially influenced fracture properties of root dentin, despite extensive infiltration of dentinal tubules by both sealer cements.

  9. Evaluation of primary carious dentin after cavity sealing in deep lesions: a 10- to 13-month follow-up.

    Science.gov (United States)

    Chibinski, Ana Claudia R; Reis, Alessandra; Kreich, Eliane Maria; Tanaka, Jefferson Luis O; Wambier, Denise S

    2013-01-01

    This study's purpose was to describe the primary dentin reactions following restoration without complete removal of infected dentin. Fragments of carious dentin from 43 teeth with acute deep lesions were removed at baseline and compared to samples of carious dentin removed 60 days later, using scanning electron microscopy (SEM) photographs. At the follow-up periods (60 days; 10-13 months), restorations were evaluated using US Public Health Service criteria and standardized radiographs. A postprocessing routine of radiographs was used to identify changes in radiographic density between periods. At baseline, SEM photographs showed disorganized tissue and bacterial invasion. After 60 days, the dentin exhibited a better organization and signs of remineralization. Differences in restoration characteristics were detected for cavosurface discoloration (P=.008), wear (Pcarious and sound dentin increased after 10 to 13 months (Pcarious and sound dentin only for the 60-day images (P=.03). Removal of infected dentin wasn't fundamental for caries arrestment. Carious dentin tended to reorganize in a short period when properly sealed, and the remineralization process continued for longer periods. Correct diagnosis of pulp vitality seems fundamental for the success of this protocol.

  10. Measuring the pollutant transport capacity of dissolved organic matter in complex matrixes

    DEFF Research Database (Denmark)

    Persson, L.; Alsberg, T.; Odham, G.

    2003-01-01

    were used and evaluated, head-space solid-phase micro-extraction (HS-SPME), enhanced solubility (ES) and fluorescence quenching (FQ). It was concluded that for samples with complex matrixes it was possible to measure the net effect of the DOM binding capacity and the salting out effect of the matrix...

  11. Effects of low-energy CO2 laser irradiation and the organic matrix on inhibition of enamel demineralization.

    Science.gov (United States)

    Hsu, C Y; Jordan, T H; Dederich, D N; Wefel, J S

    2000-09-01

    In the past two decades, accumulated evidence has clearly demonstrated the inhibitory effects of laser irradiation on enamel demineralization, but the exact mechanisms of these effects remain unclear. The purpose of this study was to investigate the effects of low-energy CO2 laser irradiation on demineralization of both normal human enamel and human enamel with its organic matrix removed. Twenty-four human molars were collected, cleaned, and cut into two halves. One half of each tooth was randomly selected and its lipid and protein content extracted. The other half of each tooth was used as the matched control. Each tooth half had two window areas. All the left windows were treated with a low-energy laser irradiation, whereas the right windows served as the non-laser controls. After caries-like lesion formation in a pH-cycling environment, microradiographs of tooth sections were taken for quantification of demineralization. The mean mineral losses (with standard deviation) of the enamel control, the lased enamel, the non-organic enamel control, and the lased non-organic enamel subgroups were 3955 (1191), 52(49), 4565(1311), and 1191 (940), respectively. A factorial ANOVA showed significant effects of laser irradiation (p = 0.0001), organic matrix (p = 0.0125), and the laser-organic matrix interaction (p = 0.0377). The laser irradiation resulted in a greater than 98% reduction in mineral loss, but the laser effect dropped to about 70% when the organic matrix in the enamel was removed. The results suggest that clinically applicable CO2 laser irradiation may cause an almost complete inhibition of enamel demineralization.

  12. Local properties of a functionally graded interphase between cementum and dentin.

    Science.gov (United States)

    Ho, Sunita P; Balooch, Mehdi; Marshall, Sally J; Marshall, Grayson W

    2004-09-01

    The study of natural interfaces may provide information necessary to engineer functionally graded biomaterials for bioengineering applications. In this study, the mechanical, structural, and chemical composition variations associated with a region between cementum and dentin were studied with the use of nanoindentation, microindentation, optical microscopy, and Raman microspectroscopy techniques. Three-millimeter-thick transverse sections (N = 5) were obtained from the apical one-third of the roots of sterilized human molars. The samples were ultrasectioned at room temperature with the use of a diamond knife and an ultramicrotome. Longitudinal ground sections of 100 microm thickness were prepared and stained with von Kossa stain to determine the mineralized regions within the molar roots. Raman microspectroscopy was used to determine the relative inorganic content, mainly apatite (PO4(3-)nu1 mode at 960 cm(-1)) and organic content, mainly collagen (C--H stretch at 2940 cm(-1)) between cementum and dentin bulk tissues. The microindentation and nanoindentation results indicated a gradual transition in hardness from cementum to dentin over a width ranging from 100 to 200 microm. However, the variation in hardness data for cementum and dentin by nanoindentation was larger (0.62 +/- 0.21, 0.77 +/- 0.14 GPa) than from microindentation (0.49 +/- 0.03, 0.69 +/- 0.07 GPa). Within the 100 to 200 microm region there was a 10 to 50 microm fibrillar hydrophilic cementum-dentin junction (CDJ) with mechanical properties significantly lower than either the cementum or the dentin side of CDJ. Light microscopy revealed a 100 to 200 microm translucent region between cementum and dentin. Raman microspectroscopy results showed a variation in organic and inorganic composition 80 to 140 microm wide. It was concluded that a morphologically and biomechanically different CDJ lies within a wider cementum-dentin interphase. Hence, cementum, dentin, and the interphase can be classified as a

  13. Low Power, Red, Green and Blue Carbon Nanotube Enabled Vertical Organic Light Emitting Transistors for Active Matrix OLED Displays

    Energy Technology Data Exchange (ETDEWEB)

    McCarthy, M. A. [University of Florida, Gainesville; Liu, B. [University of Florida, Gainesville; Donoghue, E. P. [University of Florida, Gainesville; Kravchenko, Ivan I [ORNL; Kim, D. Y. [University of Florida, Gainesville; So, Franky [University of Florida, Gainesville; Rinzler, A. G. [University of Florida, Gainesville

    2011-01-01

    Organic semiconductors are potential alternatives to polycrystalline silicon as the semiconductor used in the backplane of active matrix organic light emitting diode displays. Demonstrated here is a light-emitting transistor with an organic channel, operating with low power dissipation at low voltage, and high aperture ratio, in three colors: red, green and blue. The single-wall carbon nanotube network source electrode is responsible for the high level of performance demonstrated. A major benefit enabled by this architecture is the integration of the drive transistor, storage capacitor and light emitter into a single device. Performance comparable to commercialized polycrystalline-silicon TFT driven OLEDs is demonstrated.

  14. The influence of fibrous elastomer structure and porosity on matrix organization.

    Science.gov (United States)

    Ifkovits, Jamie L; Wu, Katherine; Mauck, Robert L; Burdick, Jason A

    2010-12-22

    Fibrous scaffolds are finding wide use in the field of tissue engineering, as they can be designed to mimic many native tissue properties and structures (e.g., cardiac tissue, meniscus). The influence of fiber alignment and scaffold architecture on cellular interactions and matrix organization was the focus of this study. Three scaffolds were fabricated from the photocrosslinkable elastomer poly(glycerol sebacate) (PGS), with changes in fiber alignment (non-aligned (NA) versus aligned (AL)) and the introduction of a PEO sacrificial polymer population to the AL scaffold (composite (CO)). PEO removal led to an increase in scaffold porosity and maintenance of scaffold anisotropy, as evident through visualization, mechanical testing, and mass loss studies. Hydrated scaffolds possessed moduli that ranged between ∼3-240 kPa, failing within the range of properties (<300 kPa) appropriate for soft tissue engineering. CO scaffolds were completely degraded as early as 16 days, whereas NA and AL scaffolds had ∼90% mass loss after 21 days when monitored in vitro. Neonatal cardiomyocytes, used as a representative cell type, that were seeded onto the scaffolds maintained their viability and aligned along the surface of the AL and CO fibers. When implanted subcutaneously in rats, a model that is commonly used to investigate in vivo tissue responses to biomaterials, CO scaffolds were completely integrated at 2 weeks, whereas ∼13% and ∼16% of the NA and AL scaffolds, respectively remained acellular. However, all scaffolds were completely populated with cells at 4 weeks post-implantation. Polarized light microscopy was used to evaluate the collagen elaboration and orientation within the scaffold. An increase in the amount of collagen was observed for CO scaffolds and enhanced alignment of the nascent collagen was observed for AL and CO scaffolds compared to NA scaffolds. Thus, these results indicate that the scaffold architecture and porosity are important considerations in

  15. The influence of fibrous elastomer structure and porosity on matrix organization.

    Directory of Open Access Journals (Sweden)

    Jamie L Ifkovits

    Full Text Available Fibrous scaffolds are finding wide use in the field of tissue engineering, as they can be designed to mimic many native tissue properties and structures (e.g., cardiac tissue, meniscus. The influence of fiber alignment and scaffold architecture on cellular interactions and matrix organization was the focus of this study. Three scaffolds were fabricated from the photocrosslinkable elastomer poly(glycerol sebacate (PGS, with changes in fiber alignment (non-aligned (NA versus aligned (AL and the introduction of a PEO sacrificial polymer population to the AL scaffold (composite (CO. PEO removal led to an increase in scaffold porosity and maintenance of scaffold anisotropy, as evident through visualization, mechanical testing, and mass loss studies. Hydrated scaffolds possessed moduli that ranged between ∼3-240 kPa, failing within the range of properties (<300 kPa appropriate for soft tissue engineering. CO scaffolds were completely degraded as early as 16 days, whereas NA and AL scaffolds had ∼90% mass loss after 21 days when monitored in vitro. Neonatal cardiomyocytes, used as a representative cell type, that were seeded onto the scaffolds maintained their viability and aligned along the surface of the AL and CO fibers. When implanted subcutaneously in rats, a model that is commonly used to investigate in vivo tissue responses to biomaterials, CO scaffolds were completely integrated at 2 weeks, whereas ∼13% and ∼16% of the NA and AL scaffolds, respectively remained acellular. However, all scaffolds were completely populated with cells at 4 weeks post-implantation. Polarized light microscopy was used to evaluate the collagen elaboration and orientation within the scaffold. An increase in the amount of collagen was observed for CO scaffolds and enhanced alignment of the nascent collagen was observed for AL and CO scaffolds compared to NA scaffolds. Thus, these results indicate that the scaffold architecture and porosity are important

  16. JRC GMO-Matrix: a web application to support Genetically Modified Organisms detection strategies.

    Science.gov (United States)

    Angers-Loustau, Alexandre; Petrillo, Mauro; Bonfini, Laura; Gatto, Francesco; Rosa, Sabrina; Patak, Alexandre; Kreysa, Joachim

    2014-12-30

    The polymerase chain reaction (PCR) is the current state of the art technique for DNA-based detection of Genetically Modified Organisms (GMOs). A typical control strategy starts by analyzing a sample for the presence of target sequences (GM-elements) known to be present in many GMOs. Positive findings from this "screening" are then confirmed with GM (event) specific test methods. A reliable knowledge of which GMOs are detected by combinations of GM-detection methods is thus crucial to minimize the verification efforts. In this article, we describe a novel platform that links the information of two unique databases built and maintained by the European Union Reference Laboratory for Genetically Modified Food and Feed (EU-RL GMFF) at the Joint Research Centre (JRC) of the European Commission, one containing the sequence information of known GM-events and the other validated PCR-based detection and identification methods. The new platform compiles in silico determinations of the detection of a wide range of GMOs by the available detection methods using existing scripts that simulate PCR amplification and, when present, probe binding. The correctness of the information has been verified by comparing the in silico conclusions to experimental results for a subset of forty-nine GM events and six methods. The JRC GMO-Matrix is unique for its reliance on DNA sequence data and its flexibility in integrating novel GMOs and new detection methods. Users can mine the database using a set of web interfaces that thus provide a valuable support to GMO control laboratories in planning and evaluating their GMO screening strategies. The platform is accessible at http://gmo-crl.jrc.ec.europa.eu/jrcgmomatrix/ .

  17. Volatile organic compounds over Eastern Himalaya, India: temporal variation and source characterization using Positive Matrix Factorization

    Directory of Open Access Journals (Sweden)

    C. Sarkar

    2014-12-01

    Full Text Available A first ever study on the characterization of volatile organic compounds (VOCs has been made over a Himalayan high altitude station in India. A total of 18 VOCs (mono aromatics-BTEX (benzene, toluene, ethylbenzene, xylene, non-BTEX substituted aromatics and halocarbon have been measured over Darjeeling (27.01° N, 88.15° E, 2200 m a.s.l. in the eastern Himalaya in India during the period of July 2011–June 2012. The annual average concentration of the sum of 18 target VOCs (TVOC was 376.3 ± 857.2 μg m−3. Monoaromatics had the highest contribution (72% followed by other substituted aromatics (22% and halocarbon (6% compounds. Toluene was the most abundant VOC in the atmosphere of Darjeeling with the contribution of ~37% to TVOC followed by benzene (~21%, ethylbenzene (~9% and xylenes (~6%. TVOC concentrations were highest during the postmonsoon season with minimum solar radiation and lowest during the premonsoon season with maximum solar radiation. Anthropogenic activities related mainly to tourists like diesel and gasoline emissions, biomass and coal burning, use of solvent and solid waste emissions were almost equal in both the seasons. Seasonal variation in TVOCs over Darjeeling was mainly governed by the incoming solar radiation rather than the emission sources. Source apportionment study using Positive Matrix Factorization (PMF model indicated that major fraction of (~60% TVOC were contributed by diesel and gasoline exhausts followed by solvent evaporation (18% and other sources. Diesel exhaust was also found to have the maximum potential in tropospheric ozone formation. The atmospheric loading of BTEX over Darjeeling was found to be comparable with several Indian metro cities and much higher than other cities around the world.

  18. The permeability of dentine from bovine incisors in vitro.

    Science.gov (United States)

    Tagami, J; Tao, L; Pashley, D H; Horner, J A

    1989-01-01

    The permeability of coronal dentine was investigated by measuring the hydraulic conductance of dentine discs. Reductions in dentine thickness from the enamel side of disc resulted in a greater increase in permeability than reductions from the pulpal side. Scanning electron microscopy revealed fewer dentinal tubules with smaller diameters in superficial dentine than in deep dentine. The permeability of coronal incisor bovine dentine is six to eight times less than that of unerupted coronal human third molar dentine but similar to that of human root dentine.

  19. Dentin-cement Interfacial Interaction

    Science.gov (United States)

    Atmeh, A.R.; Chong, E.Z.; Richard, G.; Festy, F.; Watson, T.F.

    2012-01-01

    The interfacial properties of a new calcium-silicate-based coronal restorative material (Biodentine™) and a glass-ionomer cement (GIC) with dentin have been studied by confocal laser scanning microscopy (CLSM), scanning electron microscopy (SEM), micro-Raman spectroscopy, and two-photon auto-fluorescence and second-harmonic-generation (SHG) imaging. Results indicate the formation of tag-like structures alongside an interfacial layer called the “mineral infiltration zone”, where the alkaline caustic effect of the calcium silicate cement’s hydration products degrades the collagenous component of the interfacial dentin. This degradation leads to the formation of a porous structure which facilitates the permeation of high concentrations of Ca2+, OH-, and CO32- ions, leading to increased mineralization in this region. Comparison of the dentin-restorative interfaces shows that there is a dentin-mineral infiltration with the Biodentine, whereas polyacrylic and tartaric acids and their salts characterize the penetration of the GIC. A new type of interfacial interaction, “the mineral infiltration zone”, is suggested for these calcium-silicate-based cements. PMID:22436906

  20. Dentinal candidiasis in cancer patients.

    Science.gov (United States)

    Damm, D D; Neville, B W; Geissler, R H; White, D K; Drummond, J F; Ferretti, G A

    1988-01-01

    Two examples of an unusual presentation of oropharyngeal candidiasis in cancer patients are offered. The light and scanning electron microscopic appearances of candidiasis involving the dentin of teeth are described. The potential significance of recognition of this form of candidiasis in cancer patients is discussed.

  1. Bonding over Dentin Replacement Materials.

    Science.gov (United States)

    Meraji, Naghmeh; Camilleri, Josette

    2017-08-01

    Dentin replacement materials are necessary in large cavities to protect the pulp and reduce the bulk of filling material. These materials are layered with a composite resin restorative material. Microleakage caused by poor bonding of composite resin to underlying dentin replacement material will result in pulp damage. The aim of this study was to characterize the interface between dentin replacement materials and composite resin and to measure the shear bond strength after dynamic aging. Biodentine (Septodont, Saint Maur-des-Fosses, France), Theracal LC (Bisco, Schaumburg, IL), and Fuji IX (GC, Tokyo, Japan) were used as dentin replacement materials. They were then overlaid with a total-etch and bonding agent or a self-etch primer and composite resin or a glass ionomer cement. All combinations were thermocycled for 3000 cycles. The interface was characterized using scanning electron microscopy and elemental mapping. Furthermore, the shear bond strength was assessed. The Biodentine surface was modified by etching. The Theracal LC and Fuji IX microstructure was unchanged upon the application of acid etch. The Biodentine and glass ionomer interface showed an evident wide open space, and glass particles from the glass ionomer adhered to the Biodentine surface. Elemental migration was shown with aluminum, barium, fluorine, and ytterbium present in Biodentine from the overlying composite resin. Calcium was more stable. The bond strength between Theracal LC and composite using a total-etch technique followed by self-etch primer achieved the best bond strength values. Biodentine exhibited the weakest bond with complete failure of bonding shown after demolding and thermocycling. Dynamic aging is necessary to have clinically valid data. Bonding composite resin to water-based dentin replacement materials is still challenging, and further alternatives for restoration of teeth using such materials need to be developed. Copyright © 2017 American Association of Endodontists

  2. Obstructor A Organizes Matrix Assembly at the Apical Cell Surface to Promote Enzymatic Cuticle Maturation in Drosophila*

    Science.gov (United States)

    Pesch, Yanina-Yasmin; Riedel, Dietmar; Behr, Matthias

    2015-01-01

    Assembly and maturation of the apical extracellular matrix (aECM) is crucial for protecting organisms, but underlying molecular mechanisms remain poorly understood. Epidermal cells secrete proteins and enzymes that assemble at the apical cell surface to provide epithelial integrity and stability during developmental growth and upon tissue damage. We analyzed molecular mechanisms of aECM assembly and identified the conserved chitin-binding protein Obst-A (Obstructor A) as an essential regulator. We show in Drosophila that Obst-A is required to coordinate protein and chitin matrix packaging at the apical cell surface during development. Secreted by epidermal cells, the Obst-A protein is specifically enriched in the apical assembly zone where matrix components are packaged into their highly ordered architecture. In obst-A null mutant larvae, the assembly zone is strongly diminished, resulting in severe disturbance of matrix scaffold organization and impaired aECM integrity. Furthermore, enzymes that support aECM stability are mislocalized. As a biological consequence, cuticle architecture, integrity, and function are disturbed in obst-A mutants, finally resulting in immediate lethality upon wounding. Our studies identify a new core organizing center, the assembly zone that controls aECM assembly at the apical cell surface. We propose a genetically conserved molecular mechanism by which Obst-A forms a matrix scaffold to coordinate trafficking and localization of proteins and enzymes in the newly deposited aECM. This mechanism is essential for maturation and stabilization of the aECM in a growing and remodeling epithelial tissue as an outermost barrier. PMID:25737451

  3. Drosophila convoluted/dALS is an essential gene required for tracheal tube morphogenesis and apical matrix organization.

    Science.gov (United States)

    Swanson, Lianna E; Yu, Marcus; Nelson, Kevin S; Laprise, Patrick; Tepass, Ulrich; Beitel, Greg J

    2009-04-01

    Insulin-like growth factors (IGFs) control cell and organism growth through evolutionarily conserved signaling pathways. The mammalian acid-labile subunit (ALS) is a secreted protein that complexes with IGFs to modulate their activity. Recent work has shown that a Drosophila homolog of ALS, dALS, can also complex with and modulate the activity of a Drosophila IGF. Here we report the first mutations in the gene encoding dALS. Unexpectedly, we find that these mutations are allelic to a previously described mutation in convoluted (conv), a gene required for epithelial morphogenesis. In conv mutants, the tubes of the Drosophila tracheal system become abnormally elongated without altering tracheal cell number. conv null mutations cause larval lethality, but do not disrupt several processes required for tracheal tube size control, including septate junction formation, deposition of a lumenal/apical extracellular matrix, and lumenal secretion of Vermiform and Serpentine, two putative matrix-modifying proteins. Clearance of lumenal matrix and subcellular localization of clathrin also appear normal in conv mutants. However, we show that Conv/dALS is required for the dynamic organization of the transient lumenal matrix and normal structure of the cuticle that lines the tracheal lumen. These and other data suggest that the Conv/dALS-dependent tube size control mechanism is distinct from other known processes involved in tracheal tube size regulation. Moreover, we present evidence indicating that Conv/dALS has a novel, IGF-signaling independent function in tracheal morphogenesis.

  4. TiF4 and NaF varnishes as anti-erosive agents on enamel and dentin erosion progression in vitro

    Directory of Open Access Journals (Sweden)

    Livia Picchi COMAR

    2015-02-01

    Full Text Available Objective This study assessed the effect of fluoride varnishes on the progression of tooth erosion in vitro. Material and Methods: Forty-eight enamel and 60 root dentin samples were previously demineralized (0.1% citric acid, pH 2.5, 30 min, leading to a baseline and erosive wear of 12.9 and 11.4 µm, respectively. The samples were randomly treated (6 h with a 4% TiF4 varnish (2.45%F-, pH 1.0, a 5.42% NaF varnish (2.45%F-, pH 5.0, a placebo varnish and no varnish (control. The samples were then subjected to erosive pH cycles (4x90 s/day in 0.1% citric acid, intercalated with artificial saliva for 5 days. The increment of the erosive tooth wear was calculated. In the case of dentin, this final measurement was done with and without the demineralized organic matrix (DOM. Enamel and dentin data were analyzed using ANOVA/Tukey’s and Kruskal-Wallis/Dunn tests, respectively (p<0.05. Results The TiF4 (mean±s.d: 1.5±1.1 µm and NaF (2.1±1.7 µm varnishes significantly reduced enamel wear progression compared to the placebo varnish (3.9±1.1 µm and control (4.5±0.9 µm. The same differences were found for dentin in the presence and absence of the DOM, respectively: TiF4 (average: 0.97/1.87 µm, NaF (1.03/2.13 µm, placebo varnish (3.53/4.47 µm and control (3.53/4.36 µm. Conclusion The TiF4 and NaF varnishes were equally effective in reducing the progression of tooth erosion in vitro.

  5. TiF4 and NaF varnishes as anti-erosive agents on enamel and dentin erosion progression in vitro

    Science.gov (United States)

    COMAR, Livia Picchi; CARDOSO, Cristiane de Almeida Baldini; CHARONE, Senda; GRIZZO, Larissa Tercilia; BUZALAF, Marília Afonso Rabelo; MAGALHÃES, Ana Carolina

    2015-01-01

    Objective This study assessed the effect of fluoride varnishes on the progression of tooth erosion in vitro. Material and Methods: Forty-eight enamel and 60 root dentin samples were previously demineralized (0.1% citric acid, pH 2.5, 30 min), leading to a baseline and erosive wear of 12.9 and 11.4 µm, respectively. The samples were randomly treated (6 h) with a 4% TiF4 varnish (2.45%F-, pH 1.0), a 5.42% NaF varnish (2.45%F-, pH 5.0), a placebo varnish and no varnish (control). The samples were then subjected to erosive pH cycles (4x90 s/day in 0.1% citric acid, intercalated with artificial saliva) for 5 days. The increment of the erosive tooth wear was calculated. In the case of dentin, this final measurement was done with and without the demineralized organic matrix (DOM). Enamel and dentin data were analyzed using ANOVA/Tukey’s and Kruskal-Wallis/Dunn tests, respectively (pvarnishes significantly reduced enamel wear progression compared to the placebo varnish (3.9±1.1 µm) and control (4.5±0.9 µm). The same differences were found for dentin in the presence and absence of the DOM, respectively: TiF4 (average: 0.97/1.87 µm), NaF (1.03/2.13 µm), placebo varnish (3.53/4.47 µm) and control (3.53/4.36 µm). Conclusion The TiF4 and NaF varnishes were equally effective in reducing the progression of tooth erosion in vitro. PMID:25760263

  6. The organization of the wall filaments and characterization of the matrix structures of Toxoplasma gondii cyst form.

    Science.gov (United States)

    Lemgruber, Leandro; Lupetti, Pietro; Martins-Duarte, Erica S; De Souza, Wanderley; Vommaro, Rossiane C

    2011-12-01

    The encystation process is a key step in Toxoplasma gondii life cycle, allowing the parasite to escape from the host immune system and the transmission among the hosts. A detailed characterization of the formation and structure of the cyst stage is essential for a better knowledge of toxoplasmosis. Here we isolated cysts from mice brains and analysed the cyst wall structure and cyst matrix organization using different electron microscopy techniques. Images obtained showed that the cyst wall presented a filamentous aspect, with circular openings on its surface. The filaments were organized in two layers: a compact one, facing the exterior of the whole cyst and a more loosen one, facing the matrix. Within the cyst wall, we observed tubules and a large number of vesicles. The cyst matrix presented vesicles of different sizes and tubules, which were organized in a network connecting the bradyzoites to each other and to the cyst wall. Large vesicles, with a granular material in their lumen of glycidic nature were observed. Similar vesicles were also found associated with the posterior pole of the bradyzoites and in proximity to the cyst wall. © 2011 Blackwell Publishing Ltd.

  7. MATRIX-VBS (v1.0): implementing an evolving organic aerosol volatility in an aerosol microphysics model

    Science.gov (United States)

    Gao, Chloe Y.; Tsigaridis, Kostas; Bauer, Susanne E.

    2017-02-01

    The gas-particle partitioning and chemical aging of semi-volatile organic aerosol are presented in a newly developed box model scheme, where its effect on the growth, composition, and mixing state of particles is examined. The volatility-basis set (VBS) framework is implemented into the aerosol microphysical scheme MATRIX (Multiconfiguration Aerosol TRacker of mIXing state), which resolves mass and number aerosol concentrations and in multiple mixing-state classes. The new scheme, MATRIX-VBS, has the potential to significantly advance the representation of organic aerosols in Earth system models by improving upon the conventional representation as non-volatile particulate organic matter, often also with an assumed fixed size distribution. We present results from idealized cases representing Beijing, Mexico City, a Finnish forest, and a southeastern US forest, and investigate the evolution of mass concentrations and volatility distributions for organic species across the gas and particle phases, as well as assessing their mixing state among aerosol populations. Emitted semi-volatile primary organic aerosols evaporate almost completely in the intermediate-volatility range, while they remain in the particle phase in the low-volatility range. Their volatility distribution at any point in time depends on the applied emission factors, oxidation by OH radicals, and temperature. We also compare against parallel simulations with the original scheme, which represented only the particulate and non-volatile component of the organic aerosol, examining how differently the condensed-phase organic matter is distributed across the mixing states in the model. The results demonstrate the importance of representing organic aerosol as a semi-volatile aerosol, and explicitly calculating the partitioning of organic species between the gas and particulate phases.

  8. MATRIX-VBS (v1.0): Implementing an Evolving Organic Aerosol Volatility in an Aerosol Microphysics Model

    Science.gov (United States)

    Gao, Chloe Y.; Tsigaridis, Kostas; Bauer, Susanne E.

    2017-01-01

    The gas-particle partitioning and chemical aging of semi-volatile organic aerosol are presented in a newly developed box model scheme, where its effect on the growth, composition, and mixing state of particles is examined. The volatility-basis set (VBS) framework is implemented into the aerosol microphysical scheme MATRIX (Multiconfiguration Aerosol TRacker of mIXing state), which resolves mass and number aerosol concentrations and in multiple mixing-state classes. The new scheme, MATRIX-VBS, has the potential to significantly advance the representation of organic aerosols in Earth system models by improving upon the conventional representation as non-volatile particulate organic matter, often also with an assumed fixed size distribution. We present results from idealized cases representing Beijing, Mexico City, a Finnish forest, and a southeastern US forest, and investigate the evolution of mass concentrations and volatility distributions for organic species across the gas and particle phases, as well as assessing their mixing state among aerosol populations. Emitted semi-volatile primary organic aerosols evaporate almost completely in the intermediate-volatility range, while they remain in the particle phase in the low-volatility range. Their volatility distribution at any point in time depends on the applied emission factors, oxidation by OH radicals, and temperature. We also compare against parallel simulations with the original scheme, which represented only the particulate and non-volatile component of the organic aerosol, examining how differently the condensed-phase organic matter is distributed across the mixing states in the model. The results demonstrate the importance of representing organic aerosol as a semi-volatile aerosol, and explicitly calculating the partitioning of organic species between the gas and particulate phases.

  9. Contraction stress in dentin adhesives bonded to dentin.

    Science.gov (United States)

    Hashimoto, M; de Gee, A J; Kaga, M; Feilzer, A J

    2006-08-01

    Adhesives cured under constrained conditions develop contraction stresses. We hypothesized that, with dentin as a bonding substrate, the stress would reach a maximum, followed by a continuous decline. Stress development was determined with a tensilometer for two total-etch systems and two systems with self-etching primers. The adhesives were placed in a thin layer between a glass plate and a flat dentin surface pretreated with phosphoric acid or self-etching primer. After an initial maximum shortly after light-curing, the stress decreased dramatically for the total-etch systems (70%) and, to a lesser extent, for the adhesives with self-etching primers (30%). The greater stress decrease for the total-etch systems was ascribed to water and/or solvents released into the adhesives from the fully opened dentinal tubules by the pulling/sucking action of the contraction stress. This happened less with the adhesives with self-etching primers, where the tubules remained mainly closed.

  10. Tissue phenotype depends on reciprocal interactions between the extracellular matrix and the structural organization of the nucleus

    Energy Technology Data Exchange (ETDEWEB)

    Lelie' vre, S.A.; Weaver, V.M.; Nickerson, J.A.; Larabell, C.A.; Bhaumik, A.; Petersen, O.W.; Bissell, M.J.

    1998-08-14

    What determines the nuclear organization within a cell and whether this organization itself can impose cellular function within a tissue remains unknown. To explore the relationship between nuclear organization and tissue architecture and function, we used a model of human mammary epithelial cell acinar morphogenesis. When cultured within a reconstituted basement membrane (rBM), HMT-3522 cells form polarized and growth-arrested tissue-like acini with a central lumen and deposit an endogenous BM. We show that rBM-induced morphogenesis is accompanied by relocalization of the nuclear matrix proteins NuMA, splicing factor SRm160, and cell cycle regulator Rb. These proteins had distinct distribution patterns specific for proliferation, growth arrest, and acini formation, whereas the distribution of the nuclear lamina protein, lamin B, remained unchanged. NuMA relocalized to foci, which coalesced into larger assemblies as morphogenesis progressed. Perturbation of histone acetylation in the acini by trichostatin A treatment altered chromatin structure, disrupted NuMA foci, and induced cell proliferation. Moreover, treatment of transiently permeabilized acini with a NuMA antibody led to the disruption of NuMA foci, alteration of histone acetylation, activation of metalloproteases, and breakdown of the endogenous BM. These results experimentally demonstrate a dynamic interaction between the extracellular matrix, nuclear organization, and tissue phenotype. They further show that rather than passively ref lecting changes in gene expression, nuclear organization itself can modulate the cellular and tissue phenotype.

  11. CO2 laser improves 45S5 bioglass interaction with dentin.

    Science.gov (United States)

    Bakry, A S; Takahashi, H; Otsuki, M; Sadr, A; Yamashita, K; Tagami, J

    2011-02-01

    Bioglass 45S5 is a bioactive glass that can create a layer of calcium-phosphate crystals on mineralized hard tissues. In this study, 45S5 bioglass was mixed with phosphoric acid and irradiated with CO(2) laser and examined as a possible aid in the treatment of dentin hypersensitivity. The dentinal surface modified by the aforementioned technique was chemically and micro-morphologically examined with a field emission scanning electron microscope (FE-SEM) equipped with an energy-dispersive x-ray spectroscope (EDS), and the crystalline structures of the examined dentinal surfaces were examined by x-ray diffraction (XRD). Moreover, the mechanical properties of the newly formed layer were examined by nanoindentation. The results showed that 45S5 bioglass could occlude the dentinal tubule orifices with calcium-phosphate crystals. The application of CO(2) laser potentially improved the mechanical organization of these crystals.

  12. Dentin bonding--state of the art 1999.

    Science.gov (United States)

    Perdigão, J; Lopes, M

    1999-12-01

    The adhesion of restorative materials to the hard components of tooth structure has been a goal pursued by many researchers ever since Buonocore established the foundation for adhesive and preventive dentistry. Based on the industrial use of phosphoric acid to obtain better adhesion of paints and resin coatings to metal surfaces, Buonocore proposed that phosphoric acid could be used to transform the surface of enamel to "render it more receptive to adhesion." Subsequent research indicated that the formation of taglike resin prolongations into the enamel microporosities was the leading bonding mechanism of resin to phosphoric acid-etched enamel. The enamel bonding agents of the 1960s and 1970s progressively evolved into complex multibottle or universal adhesives in the early 1990s, which were designed to bond to enamel, dentin, composite, amalgam, porcelain, and non-precious metal. Although bonding to enamel has been a dependable technique, bonding to dentin still represents an overwhelming task because dentin is a naturally wet organic tissue penetrated by a tubular maze containing the odontoblastic process, which communicates with the pulp. This intrinsic moisture may actually benefit the chemistry of the newest adhesive systems, which must be applied on moist dentin to be effective. In fact, the collapse of the collagen that occurs on air-drying may prevent the adhesive monomers from penetrating the network of nano-channels formed by the dissolution of hydroxyapatite crystals between collagen fibrils. In view of the complexity of the mechanisms associated with these mechanisms, the objective of this review article is to summarize the most recent concepts in dentin bonding.

  13. Frameshift mutations in dentin phosphoprotein and dependence of dentin disease phenotype on mutation location

    NARCIS (Netherlands)

    P. Nieminen; L. Papagiannoulis-Lascarides; J. Waltimo-Siren; P. Ollila; S. Karjalainen; S. Arte; J. Veerkamp; V. Tallon Walton; E. Chimenos Küstner; T. Siltanen; H. Holappa; P.L. Lukinmaa; S. Alaluusua

    2011-01-01

    We describe results from a mutational analysis of the region of the dentin sialophosphoprotein (DSPP) gene encoding dentin phosphoprotein (DPP) in 12 families with dominantly inherited dentin diseases. In eight families (five mutations in the N-terminal third of DPP), the clinical and radiologic fea

  14. Calcium silicate cement-induced remineralisation of totally demineralised dentine in comparison with glass ionomer cement: tetracycline labelling and two-photon fluorescence microscopy.

    Science.gov (United States)

    Atmeh, A R; Chong, E Z; Richard, G; Boyde, A; Festy, F; Watson, T F

    2015-02-01

    Two-photon fluorescence microscopy, in combination with tetracycline labelling, was used to observe the remineralising potentials of a calcium silicate-based restorative material (Biodentine(TM) ) and a glass ionomer cement (GIC:​Fuji​IX) on totally demineralised dentine. Forty demineralised dentine discs were stored with either cement in three different solutions: phosphate buffered saline (PBS) with tetracycline, phosphate-free tetracycline, and tetracycline-free PBS. Additional samples of demineralised dentine were stored alone in the first solution. After 8-week storage at 37 °C, dentine samples were imaged using two-photon fluorescence microscopy and Raman spectroscopy. Samples were later embedded in PMMA and polished block surfaces studied by 20 kV BSE imaging in an SEM to study variations in mineral concentration. The highest fluorescence intensity was exhibited by the dentine stored with Biodentine(TM) in the PBS/tetracycline solution. These samples also showed microscopic features of matrix remineralisation including a mineralisation front and intra- and intertubular mineralisation. In the other solutions, dentine exhibited much weaker fluorescence with none of these features detectable. Raman spectra confirmed the formation of calcium phosphate mineral with Raman peaks similar to apatite, while no mineral formation was detected in the dentine stored in cement-free or PBS-free media, or with GIC. It could therefore be concluded that Biodentine(TM) induced calcium phosphate mineral formation within the dentine matrix when stored in phosphate-rich media, which was selectively detectable using the tetracycline labelling.

  15. Multi-factoriality of dentine hypersensitivity

    OpenAIRE

    Stojšin Ivana; Petrović Ljubomir; Stojanac Igor; Drobac Milan

    2008-01-01

    Introduction. Dentine hypersensitivity has been defined as a sharp, short pain arising from exposed dentin in response to stimuli typically thermal, evaporative tactile, osmoticor, chemical and which cannot be ascribed to any other form of dental defect or pathology. Prevalence. The most affected patients range in age from 20 to 40. The following teeth tend to be most sensitive: cuspids, premolars and incisors, location-concentrated on the facial surface. Morphological bases of dentine hypers...

  16. Organic Matter Detection on Mars by Pyrolysis-FTIR: An Analysis of Sensitivity and Mineral Matrix Effects

    Science.gov (United States)

    Gordon, Peter R.; Sephton, Mark A.

    2016-11-01

    Returning samples from Mars will require an effective method to assess and select the highest-priority geological materials. The ideal instrument for sample triage would be simple in operation, limited in its demand for resources, and rich in produced diagnostic information. Pyrolysis-Fourier infrared spectroscopy (pyrolysis-FTIR) is a potentially attractive triage instrument that considers both the past habitability of the sample depositional environment and the presence of organic matter that may reflect actual habitation. An important consideration for triage protocols is the sensitivity of the instrumental method. Experimental data indicate pyrolysis-FTIR sensitivities for organic matter at the tens of parts per million level. The mineral matrix in which the organic matter is hosted also has an influence on organic detection. To provide an insight into matrix effects, we mixed well-characterized organic matter with a variety of dry minerals, to represent the various inorganic matrices of Mars samples, prior to analysis. During pyrolysis-FTIR, serpentinites analogous to those on Mars indicative of the Phyllocian Era led to no negative effects on organic matter detection; sulfates analogous to those of the Theiikian Era led, in some instances, to the combustion of organic matter; and palagonites, which may represent samples from the Siderikian Era, led, in some instances, to the chlorination of organic matter. Any negative consequences brought about by these mineral effects can be mitigated by the correct choice of thermal extraction temperature. Our results offer an improved understanding of how pyrolysis-FTIR can perform during sample triage on Mars.

  17. Hereditary dentine disorders: dentinogenesis imperfecta and dentine dysplasia

    Directory of Open Access Journals (Sweden)

    MacKie Iain

    2008-11-01

    Full Text Available Abstract The hereditary dentine disorders, dentinogenesis imperfecta (DGI and dentine dysplasia (DD, comprise a group of autosomal dominant genetic conditions characterised by abnormal dentine structure affecting either the primary or both the primary and secondary dentitions. DGI is reported to have an incidence of 1 in 6,000 to 1 in 8,000, whereas that of DD type 1 is 1 in 100,000. Clinically, the teeth are discoloured and show structural defects such as bulbous crowns and small pulp chambers radiographically. The underlying defect of mineralisation often results in shearing of the overlying enamel leaving exposed weakened dentine which is prone to wear. Currently, three sub-types of DGI and two sub-types of DD are recognised but this categorisation may change when other causative mutations are found. DGI type I is inherited with osteogenesis imperfecta and recent genetic studies have shown that mutations in the genes encoding collagen type 1, COL1A1 and COL1A2, underlie this condition. All other forms of DGI and DD, except DD-1, appear to result from mutations in the gene encoding dentine sialophosphoprotein (DSPP, suggesting that these conditions are allelic. Diagnosis is based on family history, pedigree construction and detailed clinical examination, while genetic diagnosis may become useful in the future once sufficient disease-causing mutations have been discovered. Differential diagnoses include hypocalcified forms of amelogenesis imperfecta, congenital erythropoietic porphyria, conditions leading to early tooth loss (Kostmann's disease, cyclic neutropenia, Chediak-Hegashi syndrome, histiocytosis X, Papillon-Lefevre syndrome, permanent teeth discolouration due to tetracyclines, Vitamin D-dependent and vitamin D-resistant rickets. Treatment involves removal of sources of infection or pain, improvement of aesthetics and protection of the posterior teeth from wear. Beginning in infancy, treatment usually continues into adulthood with a

  18. Hereditary dentine disorders: dentinogenesis imperfecta and dentine dysplasia.

    Science.gov (United States)

    Barron, Martin J; McDonnell, Sinead T; Mackie, Iain; Dixon, Michael J

    2008-11-20

    The hereditary dentine disorders, dentinogenesis imperfecta (DGI) and dentine dysplasia (DD), comprise a group of autosomal dominant genetic conditions characterised by abnormal dentine structure affecting either the primary or both the primary and secondary dentitions. DGI is reported to have an incidence of 1 in 6,000 to 1 in 8,000, whereas that of DD type 1 is 1 in 100,000. Clinically, the teeth are discoloured and show structural defects such as bulbous crowns and small pulp chambers radiographically. The underlying defect of mineralisation often results in shearing of the overlying enamel leaving exposed weakened dentine which is prone to wear. Currently, three sub-types of DGI and two sub-types of DD are recognised but this categorisation may change when other causative mutations are found. DGI type I is inherited with osteogenesis imperfecta and recent genetic studies have shown that mutations in the genes encoding collagen type 1, COL1A1 and COL1A2, underlie this condition. All other forms of DGI and DD, except DD-1, appear to result from mutations in the gene encoding dentine sialophosphoprotein (DSPP), suggesting that these conditions are allelic. Diagnosis is based on family history, pedigree construction and detailed clinical examination, while genetic diagnosis may become useful in the future once sufficient disease-causing mutations have been discovered. Differential diagnoses include hypocalcified forms of amelogenesis imperfecta, congenital erythropoietic porphyria, conditions leading to early tooth loss (Kostmann's disease, cyclic neutropenia, Chediak-Hegashi syndrome, histiocytosis X, Papillon-Lefevre syndrome), permanent teeth discolouration due to tetracyclines, Vitamin D-dependent and vitamin D-resistant rickets. Treatment involves removal of sources of infection or pain, improvement of aesthetics and protection of the posterior teeth from wear. Beginning in infancy, treatment usually continues into adulthood with a number of options including

  19. Inhibition of enzymatic degradation of adhesive-dentin interfaces.

    Science.gov (United States)

    De Munck, J; Van den Steen, P E; Mine, A; Van Landuyt, K L; Poitevin, A; Opdenakker, G; Van Meerbeek, B

    2009-12-01

    Adhesive procedures activate dentin-associated matrix metalloproteinases (MMPs), and so iatrogenically initiate bond degradation. We hypothesized that adding MMP inhibitors to adhesive primers may prevent this endogenous enzymatic degradation, thereby improving bond durability. A non-specific MMP inhibitor (chlorhexidine) and a MMP-2/9-specific inhibitor (SB-3CT) were admixed to the primers of an etch & rinse and a self-etch adhesive, both considered as gold-standard adhesives within their respective categories. For dentin powder exposed to the adhesives under clinical application conditions, gelatin zymography revealed the release of MMP-2 (not of MMP-9) by the etch & rinse adhesive, while no release of enzymes could be detected for the mild self-etch adhesive, most likely because of its limited dentin demineralization effect. The built-in MMP inhibitors appeared effective in reducing bond degradation only for the etch & rinse adhesive, and not for the self-etch adhesive. Water sorption of adhesive interfaces most likely remains the principal mechanism of bond degradation, while endogenous enzymes appear to contribute to bond degradation of only etch & rinse adhesives.

  20. Iloprost induces tertiary dentin formation.

    Science.gov (United States)

    Limjeerajarus, Chalida Nakalekha; Chanarattanubol, Thichaporn; Trongkij, Panruethai; Rujiwanichkul, Mirantee; Pavasant, Prasit

    2014-11-01

    Prostacyclin (PGI2), a member of the prostaglandin family, can promote angiogenesis and cell proliferation. In this study, the effect of the application of a PGI2 analog (iloprost) on dentin repair was examined in vitro and in vivo. Iloprost significantly stimulated the expression of vascular endothelial growth factor and osteo-/odontogenic marker messenger RNA in human dental pulp cells (HDPCs) under osteoinductive conditions in vitro. In addition, iloprost enhanced HDPC alkaline phosphatase enzymatic activity and mineral deposition. An in vivo study was performed using a rat molar mechanical pulp exposure model. After 30 days, histologic analysis revealed that there was a dramatic tertiary dentin formation in the iloprost-treated group compared with the calcium hydroxide and the untreated control groups. Furthermore, vascular endothelial growth factor protein expression in dental pulp tissue was increased in the iloprost-treated group as determined by immunohistochemical staining. Taken together, the present study, for the first time, shows that iloprost induces the expression of osteo-/odontogenic markers in vitro and promotes angiogenic factor expression and enhances tertiary dentin formation in vivo. This implies the potential clinical usefulness of iloprost in vital pulp therapy. Copyright © 2014 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

  1. Molecular Cloning, Expression and Genome Organization of Channel Catfish (Ictalurus punctatus) Matrix Metalloproteinase-9

    Science.gov (United States)

    In the course of studying pathogenesis of enteric septicemia of catfish, we noted that channel catfish matrix metalloproteinase-9 (MMP-9) gene was up-regulated after Edwardsiella ictaluri infection. In this study, we cloned, sequenced using the RACE (rapid amplification of cDNA ends) method and cha...

  2. Pulp-dentin biology in restorative dentistry. Part 4: Dental caries--characteristics of lesions and pulpal reactions.

    Science.gov (United States)

    Bjørndal, L; Mjör, I A

    2001-10-01

    The infectious disease dental caries results in lesions that may affect enamel, dentin, pulp, and cementum. If a caries lesion has progressed to the stage at which it requires restorative intervention, it is important that the clinician understand the tissue changes in the dentin that are likely to have taken place during lesion development. Until the present, no major distinction between the restorative treatment of active (rapidly progressing) and arrested (slowly progressing) lesions has been made, despite the fact that the two conditions exhibit major differences in tissue changes in the pulp-dentin complex. Intratubular changes and tertiary dentin formation will affect the outcome of the restorative treatment. In unaffected dentin and in rapidly progressing lesions, permeable tubules persist, and when the preparation of carious teeth results in the opening of unaffected dentin, greater care must be taken in all phases of the restorative procedures than if the dentin is impermeable. An active, deep lesion can be changed to an arrested lesion by a two-step excavation approach. Optimal assessment of the prevailing clinical conditions can only be made on the basis of thorough knowledge of the biology of the pulp-dentin organ.

  3. A large-area, flexible pressure sensor matrix with organic field-effect transistors for artificial skin applications

    Science.gov (United States)

    Someya, Takao; Sekitani, Tsuyoshi; Iba, Shingo; Kato, Yusaku; Kawaguchi, Hiroshi; Sakurai, Takayasu

    2004-07-01

    It is now widely accepted that skin sensitivity will be very important for future robots used by humans in daily life for housekeeping and entertainment purposes. Despite this fact, relatively little progress has been made in the field of pressure recognition compared to the areas of sight and voice recognition, mainly because good artificial "electronic skin" with a large area and mechanical flexibility is not yet available. The fabrication of a sensitive skin consisting of thousands of pressure sensors would require a flexible switching matrix that cannot be realized with present silicon-based electronics. Organic field-effect transistors can substitute for such conventional electronics because organic circuits are inherently flexible and potentially ultralow in cost even for a large area. Thus, integration of organic transistors and rubber pressure sensors, both of which can be produced by low-cost processing technology such as large-area printing technology, will provide an ideal solution to realize a practical artificial skin, whose feasibility has been demonstrated in this paper. Pressure images have been taken by flexible active matrix drivers with organic transistors whose mobility reaches as high as 1.4 cm2/V·s. The device is electrically functional even when it is wrapped around a cylindrical bar with a 2-mm radius.

  4. Biodentine-a novel dentinal substitute for single visit apexification.

    Science.gov (United States)

    Nayak, Gurudutt; Hasan, Mohammad Faiz

    2014-05-01

    Use of an apical plug in management of cases with open apices has gained popularity in recent years. Biodentine, a new calcium silicate-based material has recently been introduced as a dentine substitute, whenever original dentine is damaged. This case report describes single visit apexification in a maxillary central incisor with necrotic pulp and open apex using Biodentine as an apical barrier, and a synthetic collagen material as an internal matrix. Following canal cleaning and shaping, calcium hydroxide was placed as an intracanal medicament for 1 mon. This was followed by placement of small piece of absorbable collagen membrane beyond the root apex to serve as matrix. An apical plug of Biodentine of 5 mm thickness was placed against the matrix using pre-fitted hand pluggers. The remainder of canal was back-filled with thermoplasticized gutta-percha and access cavity was restored with composite resin followed by all-ceramic crown. One year follow-up revealed restored aesthetics and function, absence of clinical signs and symptoms, resolution of periapical rarefaction, and a thin layer of calcific tissue formed apical to the Biodentine barrier. The positive clinical outcome in this case is encouraging for the use of Biodentine as an apical plug in single visit apexification procedures.

  5. Biodentine-a novel dentinal substitute for single visit apexification

    Directory of Open Access Journals (Sweden)

    Gurudutt Nayak

    2014-05-01

    Full Text Available Use of an apical plug in management of cases with open apices has gained popularity in recent years. Biodentine, a new calcium silicate-based material has recently been introduced as a dentine substitute, whenever original dentine is damaged. This case report describes single visit apexification in a maxillary central incisor with necrotic pulp and open apex using Biodentine as an apical barrier, and a synthetic collagen material as an internal matrix. Following canal cleaning and shaping, calcium hydroxide was placed as an intracanal medicament for 1 mon. This was followed by placement of small piece of absorbable collagen membrane beyond the root apex to serve as matrix. An apical plug of Biodentine of 5 mm thickness was placed against the matrix using pre-fitted hand pluggers. The remainder of canal was back-filled with thermoplasticized gutta-percha and access cavity was restored with composite resin followed by all-ceramic crown. One year follow-up revealed restored aesthetics and function, absence of clinical signs and symptoms, resolution of periapical rarefaction, and a thin layer of calcific tissue formed apical to the Biodentine barrier. The positive clinical outcome in this case is encouraging for the use of Biodentine as an apical plug in single visit apexification procedures.

  6. Metal-Organic Frameworks to Metal/Metal Oxide Embedded Carbon Matrix: Synthesis, Characterization and Gas Sorption Properties

    Directory of Open Access Journals (Sweden)

    Jiun-Jen Chen

    2015-08-01

    Full Text Available Three isostructural metal-organic frameworks, (MOFs, [Fe(OH(1,4-NDC] (1, [Al(OH(1,4-NDC] (2, and [In(OH(1,4-NDC] (3 have been synthesized hydrothermally by using 1,4-naphthalene dicarboxylate (1,4-NDC as a linker. The MOFs were characterized using various techniques and further used as precursor materials for the synthesis of metal/metal oxide nanoparticles inserted in a carbon matrix through a simple thermal conversion method. The newly synthesized carbon materials were characterized by scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy analysis, powder X-ray diffraction and BET analysis. The results showed that the MOF-derived carbon composite materials maintained the morphology of the original MOF upon carbonization, and confirmed the insertion of metal/metal oxide particles in the carbon matrix.

  7. Cadherin-Based Intercellular Adhesions Organize Epithelial Cell-Matrix Traction Forces

    CERN Document Server

    Mertz, Aaron F; Banerjee, Shiladitya; Goldstein, Jill; Rosowski, Kathryn R; Niessen, Carien M; Marchetti, M Cristina; Dufresne, Eric R; Horsley, Valerie

    2012-01-01

    Cell--cell and cell-matrix adhesions play essential roles in the function of tissues. There is growing evidence for the importance of crosstalk between these two adhesion types, yet little is known about the impact of these interactions on the mechanical coupling of cells to the extracellular-matrix (ECM). Here, we combine experiment and theory to reveal how intercellular adhesions modulate forces transmitted to the ECM. In the absence of cadherin-based adhesions, primary mouse keratinocytes within a colony appear to act independently, with significant traction forces extending throughout the colony. In contrast, with strong cadherin-based adhesions, keratinocytes in a cohesive colony localize traction forces to the colony periphery. Through genetic or antibody-mediated loss of cadherin expression or function, we show that cadherin-based adhesions are essential for this mechanical cooperativity. A minimal physical model in which cell--cell adhesions modulate the physical cohesion between contractile cells is ...

  8. DENTINE CARIES: ACID-TOLERANT MICROORGANISMS AND ASPECTS ON COLLAGEN DEGRADATION.

    Science.gov (United States)

    Lager, Anders Hedenbjörk

    2014-01-01

    . Key findings: Each investigated lesion harbored a unique microbiota in terms of both species composition and numbers of microorganisms. This indicates that various combinations of aciduric microorganisms can colonize, survive in and probably also propagate dentine carious lesions. We also found that solid pH-selective agars can be used successfully to select acid-tolerant microorganisms in caries lesions. This would preserve their phenotypic traits for further study. In Paper III, the relation between salivary levels of matrix metalloproteinase-8 (MMP-8), salivary levels of tissue inhibitor of MMP (TIMP-1), and the presence of manifest caries lesions in a large number of subjects was investigated. Saliva samples were collected and analyzed for concentrations of MMP-8, TIMP-1 and total protein using immunofluorometric assays, enzyme linked immunosorbent assays and Bradford assays, respectively. Key findings: Subjects with manifest caries lesions had significantly elevated levels of salivary MMP-8 compared to subjects without caries lesions. TIMP-1 was not significant in any case. In Paper IV, a new method for generating bioactive demineralized dentine matrix substrate (DDM) was developed using a dialysis system and two different demineralization approaches (acetic acid or EDTA). The generated DDM was subsequently analyzed for the presence of type 1 collagen, active MMP-8 and hydroxyproline (HYP) levels using SDS-PAGE, ELISA or immunofluorescence assay. Key findings: Both demineralization methods produced a substrate rich in collagen and with preserved MMP-8 activity. This report presents new knowledge on the composition of the acid tolerant dentine caries microbiota from three levels in dentine carious lesions and on the efficacy of operative caries removal on the numbers of viable microorganisms in the caries free cavity using two operative methods. Moreover, the basic mechanisms behind collagen degradation in the dentine caries process are studied from both a

  9. Exploiting Poly(ethylene glycol as a Matrix for Liquid-Phase Organic Synthesis

    Directory of Open Access Journals (Sweden)

    Kim D. Janda

    2000-08-01

    Full Text Available Soluble polymer-supported chemistry is a technology that allows the blending of the benefits of polymer-supported synthesis and solution-phase chemistry. Herein, we describe our recent efforts in this area targeted at exploring the scope of poly(ethylene glycol (PEG as the matrix. Specifically we describe the use of PEG as a support for triphenyl phosphine and for the Stille reaction.

  10. Reducing the Matrix Effect in Organic Cluster SIMS Using Dynamic Reactive Ionization

    Science.gov (United States)

    Tian, Hua; Wucher, Andreas; Winograd, Nicholas

    2016-12-01

    Dynamic reactive ionization (DRI) utilizes a reactive molecule, HCl, which is doped into an Ar cluster projectile and activated to produce protons at the bombardment site on the cold sample surface with the presence of water. The methodology has been shown to enhance the ionization of protonated molecular ions and to reduce salt suppression in complex biomatrices. In this study, we further examine the possibility of obtaining improved quantitation with DRI during depth profiling of thin films. Using a trehalose film as a model system, we are able to define optimal DRI conditions for depth profiling. Next, the strategy is applied to a multilayer system consisting of the polymer antioxidants Irganox 1098 and 1010. These binary mixtures have demonstrated large matrix effects, making quantitative SIMS measurement not feasible. Systematic comparisons of depth profiling of this multilayer film between directly using GCIB, and under DRI conditions, show that the latter enhances protonated ions for both components by 4- to 15-fold, resulting in uniform depth profiling in positive ion mode and almost no matrix effect in negative ion mode. The methodology offers a new strategy to tackle the matrix effect and should lead to improved quantitative measurement using SIMS.

  11. New Driving Scheme to Improve Hysteresis Characteristics of Organic Thin Film Transistor-Driven Active-Matrix Organic Light Emitting Diode Display

    Science.gov (United States)

    Yamamoto, Toshihiro; Nakajima, Yoshiki; Takei, Tatsuya; Fujisaki, Yoshihide; Fukagawa, Hirohiko; Suzuki, Mitsunori; Motomura, Genichi; Sato, Hiroto; Tokito, Shizuo; Fujikake, Hideo

    2011-02-01

    A new driving scheme for an active-matrix organic light emitting diode (AMOLED) display was developed to prevent the picture quality degradation caused by the hysteresis characteristics of organic thin film transistors (OTFTs). In this driving scheme, the gate electrode voltage of a driving-OTFT is directly controlled through the storage capacitor so that the operating point for the driving-OTFT is on the same hysteresis curve for every pixel after signal data are stored in the storage capacitor. Although the number of OTFTs in each pixel for the AMOLED display is restricted because OTFT size should be large enough to drive organic light emitting diodes (OLEDs) due to their small carrier mobility, it can improve the picture quality for an OTFT-driven flexible OLED display with the basic two transistor-one capacitor circuitry.

  12. The Impact of Goal Setting and Empowerment on Governmental Matrix Organizations

    Science.gov (United States)

    1993-09-01

    Cooper. Business Reasearch Methods. Homewood IL: Irwin, Inc., 1991. Fayol , Henri . "General Principles of Management," in Clasics of Organization...the worker who is most qualified, the individual worker is able to apply their unique qualifications to the greater good of the organization. Henri ... Fayol believed that allowing the individual to exercise their skills to the greater good of the organization promotes self-esteem and initiative in the

  13. Chlorhexidine Nanocapsule Drug Delivery Approach to the Resin-Dentin Interface.

    Science.gov (United States)

    Priyadarshini, B M; Selvan, S T; Lu, T B; Xie, H; Neo, J; Fawzy, A S

    2016-08-01

    In this study, we are introducing a new drug-delivery approach to demineralized dentin substrates through microsized dentinal tubules in the form of drug-loaded nanocapsules. Chlorhexidine (CHX) is widely used in adhesive dentistry due to its nonspecific matrix metalloproteinase inhibitory effect and antibacterial activities. Poly(ε-caprolactone) nanocapsules (nano-PCL) loaded with CHX were fabricated by interfacial polymer deposition at PCL/CHX ratios of 125:10, 125:25, and 125:50. Unloaded nanocapsules (blank) were fabricated as control. The fabricated nanocapsules were characterized in vitro in terms of particle size, surface charges, particle recovery, encapsulation efficiency, and drug loading. Nanocapsule morphology, drug inclusion, structural properties, and crystallinity were investigated by scanning and transmission electron microscopes (SEM/TEM), energy-dispersive x-ray analysis, Fourier transform infrared spectroscopy, and x-ray diffraction. Initial screening of the antibacterial activities and the cytotoxicity of the nanocapsules were also conducted. Nanocapsules, as carried on ethanol/water solution, were delivered to demineralized dentin specimens connected to an ex vivo model setup simulating the pulpal pressure to study their infiltration, penetration depth, and retention inside the dentinal tubules by SEM/TEM. Nanocapsules were Ag labeled and delivered to demineralized dentin, followed by the application of a 2-step etch-and-rinse dentin adhesive. CHX-release profiles were characterized in vitro and ex vivo up to 25 d. Spherical nanocapsules were fabricated with a CHX core coated with a thin PCL shell. The blank nanocapsules exhibited the largest z-average diameter with negatively charged ζ-potential. With CHX incorporation, the nanocapsule size was decreased with a positive shift in ζ-potential. Nano-PCL/CHX at 125:50 showed the highest drug loading, antibacterial effect, and CHX release both in vitro and ex vivo. SEM and TEM revealed the deep

  14. Dentinal innervation of impacted human third molars.

    Science.gov (United States)

    Lilja, J; Fagerberg-Mohlin, B

    1984-12-01

    Five totally impacted third molars were studied in the transmission electron microscope for the presence of nervous structures in the dentin before eruption. In contradiction to earlier studies available, nervous structures were found in the predentin and the dentin of the impacted third molars in different parts of the crown and also in the predentin of the root.

  15. Raman spectra of human dentin mineral

    NARCIS (Netherlands)

    Tsuda, H; Ruben, J; Arends, J

    1996-01-01

    Human dentin mineral has been investigated by using micro-Raman spectroscopy. Fluorescence and thermal problems were largely avoided by preparing dentin samples by grinding and ultrasonic agitation in acetone. The Raman spectral features were consistent with those of impure hydroxyapatite containing

  16. Unicystic ameloblastoma with the presence of dentin

    Directory of Open Access Journals (Sweden)

    Sivapathasundharam B

    2007-01-01

    Full Text Available We present a case of unicystic ameloblastoma of the posterior mandible in a 28 year-old female, histologically showing luminal and intramural plexiform epithelial proliferation with typical dentin in the connective tissue capsule. The characteristics of hard tissue formation in ameloblastomas reported in existing literature and the possible origin of the dentin mass seen in our case are discussed.

  17. Dspp-independent Effects of Transgenic Trps1 Overexpression on Dentin Formation.

    Science.gov (United States)

    Mobley, C G; Kuzynski, M; Zhang, H; Jani, P; Qin, C; Napierala, D

    2015-08-01

    The Trps1 transcription factor is highly expressed in dental mesenchyme and preodontoblasts, while in mature, secretory odontoblasts, it is expressed at low levels. Previously, we have shown that high Trps1 levels in mature odontoblasts impair their function in vitro and in vivo. Col1a1-Trps1 transgenic (Trps1-Tg) mice demonstrate defective dentin secretion and mineralization, which are associated with significantly decreased Dspp expression due to direct repression of the Dspp gene by Trps1. Here, by crossing Trps1-Tg and Col1a1-Dspp transgenic (Dspp-Tg) mice, we generated Col1a1-Trps1;Col1a1-Dspp double transgenic (double-Tg) mice in which Dspp was restored in odontoblasts overexpressing Trps1. Comparative micro-computed tomography analyses revealed partial correction of the dentin volume and no improvement of dentin mineralization in double transgenic mice in comparison with Trps1-Tg and wild-type (WT) mice. In addition, dentin of double-Tg mice has an irregular mineralization pattern characteristic for dentin in hypophosphatemic rickets. Consistent with this phenotype, decreased levels of Phex, Vdr, and Fam20c proteins are detected in both Trps1-Tg and double-Tg odontoblasts in comparison with WT and Dspp-Tg odontoblasts. This suggests that the Dspp-independent dentin mineralization defects in Trps1-Tg mice are a result of downregulation of a group of proteins critical for mineral deposition within the dentin matrix. In summary, by demonstrating that Trps1 functions as a repressor of later stages of dentinogenesis, we provide functional significance of the dynamic Trps1 expression pattern during dentinogenesis.

  18. Raman imaging to study structural and chemical features of the dentin enamel junction

    Science.gov (United States)

    Alebrahim, M. Anwar; Krafft, C.; Popp, J.

    2015-10-01

    The structure and chemical features of the human dentin enamel junction (DEJ) were characterized using Raman spectroscopic imaging. Slices were prepared from 10 German, and 10 Turkish teeth. Raman images were collected at 785 nm excitation and the average Raman spectra were calculated for analysis. Univariate and multivariate spectral analysis were applied for investigation. Raman images were obtained based on the intensity ratios of CH at 1450 cm-1 (matrix) to phosphate at 960 cm-1 (mineral), and carbonate to phosphate (1070/960) ratios. Different algorithms (HCA, K-means cluster and VCA) also used to study the DEJ. The obtained results showed that the width of DEJ is about 5 pm related to univariate method while it varies from 6 to 12 μm based on multivariate spectral technique. Both spectral analyses showed increasing in carbonate content inside the DEJ compared to the dentin, and the amide I (collagen) peak in dentin spectra is higher than DEJ spectra peak.

  19. Rescue of Odontogenesis in Dmp1-deficient Mice by Targeted Re-expression of DMP1 Reveals Roles for DMP1 in Early Odontogenesis and Dentin Apposition in vivo

    OpenAIRE

    Lu, Yongbo; Ye, Ling; Yu, Shibin; Zhang, Shubin; Xie, Yixia; McKee, Marc D.; Li, Yan Chun; Kong, Juan; Eick, J. David; Dallas, Sarah L.; Feng, Jian Q.

    2006-01-01

    Dentin matrix protein 1 (DMP1) is expressed in both pulp and odontoblast cells and deletion of the Dmp1 gene leads to defects in odontogenesis and mineralization. The goals of this study were to examine how DMP1 controls dentin mineralization and odontogenesis in vivo. Fluorochrome labeling of dentin in Dmp1-null mice showed a diffuse labeling pattern with a three-fold reduction in dentin appositional rate compared to controls. Deletion of DMP1 was also associated with abnormalities in the de...

  20. Enhanced Pixel-Driving Circuits for Active-Matrix Organic-Light-Emitting Diode Displays with Large Sizes

    Science.gov (United States)

    Yu, Sang Ho; Choi, Sung Wook; Shin, Hong Jae; Kwack, Kae Dal; Kim, Tae Whan

    2005-03-01

    Enhanced pixel-driving circuits for active-matrix organic-light-emitting diode (AM-OLED) displays with large sizes and highly uniform brightnesses were designed for system on panel. The driving method used the pre-charge functions of the data for a highly uniform brightness during a short time to program the current. The currents of the designed pixel-driving circuits were not significantly affected by variations in the threshold voltages, or by the mobilities of the driving thin-film transistors. These results indicate that the proposed pixel-driving circuits hold promise for potential applications in AM-OLED displays with large sizes and highly uniform brightnesses.

  1. Exact matrix treatment of statistical mechanical lattice model of adsorption induced gate opening in metal-organic frameworks

    Science.gov (United States)

    Dunne, Lawrence J.; Manos, George

    2015-05-01

    Here we present a statistical mechanical lattice model which is exactly solvable using a matrix method and allows treatment of adsorption induced gate opening structural transformations of metal-organic frameworks which are nanoporous materials with exceptional adsorption properties. Modelling of these structural changes presents a serious theoretical challenge when the solid and gas species are treated in an even handed way. This exactly solvable model complements other simulation based approaches. The methodology presented here highlights the competition between the potential for adsorption and the energy required for structural transition as a driving force for the features in the adsorption isotherms.

  2. Biofilm assembly becomes crystal clear – filamentous bacteriophage organize the Pseudomonas aeruginosa biofilm matrix into a liquid crystal

    Science.gov (United States)

    Secor, Patrick R.; Jennings, Laura K.; Michaels, Lia A.; Sweere, Johanna M.; Singh, Pradeep K.; Parks, William C.; Bollyky, Paul L.

    2015-01-01

    Pseudomonas aeruginosa is an opportunistic bacterial pathogen associated with many types of chronic infection. At sites of chronic infection, such as the airways of people with cystic fibrosis (CF), P. aeruginosa forms biofilm-like aggregates. These are clusters of bacterial cells encased in a polymer-rich matrix that shields bacteria from environmental stresses and antibiotic treatment. When P. aeruginosa forms a biofilm, large amounts of filamentous Pf bacteriophage (phage) are produced. Unlike most phage that typically lyse and kill their bacterial hosts, filamentous phage of the genus Inovirus, which includes Pf phage, often do not, and instead are continuously extruded from the bacteria. Here, we discuss the implications of the accumulation of filamentous Pf phage in the biofilm matrix, where they interact with matrix polymers to organize the biofilm into a highly ordered liquid crystal. This structural configuration promotes bacterial adhesion, desiccation survival, and antibiotic tolerance – all features typically associated with biofilms. We propose that Pf phage make structural contributions to P. aeruginosa biofilms and that this constitutes a novel form of symbiosis between bacteria and bacteriophage.

  3. Vitamin D and calcium supplementation for three years in postmenopausal osteoporosis significantly alters bone mineral and organic matrix quality.

    Science.gov (United States)

    Paschalis, E P; Gamsjaeger, S; Hassler, N; Fahrleitner-Pammer, A; Dobnig, H; Stepan, J J; Pavo, I; Eriksen, E F; Klaushofer, K

    2017-02-01

    Prospective, controlled clinical trials in postmenopausal osteoporosis typically compare effects of an active drug with placebo in addition to vitamin D and calcium supplementation in both treatment arms. While clinical benefits are documented, the effect of this supplementation in the placebo arm and in clinical practice on bone material composition properties is unknown. The purpose of the present study was to evaluate these bone quality indices (specifically mineral/matrix, nanoporosity, glycosaminoglycan content, mineral maturity/crystallinity, and pyridinoline content) in patients that either received long-term vitamin D (400-1200IU) and calcium (1.0-1.5g) supplementation, or did not. We have analyzed by Raman microspectroscopy the bone forming trabecular surfaces of iliac crest in pre-treatment samples of a teriparatide study and the endpoint biopsies of the control arm obtained from the HORIZON trial. In general, the mineral/matrix ratio and the glycosaminoglycan (GAG) content was higher while nanoporosity, (a surrogate for tissue water content), the mineral maturity/crystallinity (MMC) and the pyridinoline (Pyd) content was lower in patients without long-term supplementation. Moreover, all indices were significantly dependent on tissue age. In conclusion, vitamin D and calcium supplementation is associated with altered mineral and organic matrix properties.

  4. Biofilm assembly becomes crystal clear – filamentous bacteriophage organize the Pseudomonas aeruginosa biofilm matrix into a liquid crystal

    Directory of Open Access Journals (Sweden)

    Patrick R. Secor

    2015-12-01

    Full Text Available Pseudomonas aeruginosa is an opportunistic bacterial pathogen associated with many types of chronic infection. At sites of chronic infection, such as the airways of people with cystic fibrosis (CF, P. aeruginosa forms biofilm-like aggregates. These are clusters of bacterial cells encased in a polymer-rich matrix that shields bacteria from environmental stresses and antibiotic treatment. When P. aeruginosa forms a biofilm, large amounts of filamentous Pf bacteriophage (phage are produced. Unlike most phage that typically lyse and kill their bacterial hosts, filamentous phage of the genus Inovirus, which includes Pf phage, often do not, and instead are continuously extruded from the bacteria. Here, we discuss the implications of the accumulation of filamentous Pf phage in the biofilm matrix, where they interact with matrix polymers to organize the biofilm into a highly ordered liquid crystal. This structural configuration promotes bacterial adhesion, desiccation survival, and antibiotic tolerance – all features typically associated with biofilms. We propose that Pf phage make structural contributions to P. aeruginosa biofilms and that this constitutes a novel form of symbiosis between bacteria and bacteriophage.

  5. UV and RIR matrix assisted pulsed laser deposition of organic MEH-PPV films

    DEFF Research Database (Denmark)

    Christensen, Bo Toftmann; Papantonalis, M.R.; Auyeung, R.C.Y.

    2004-01-01

    were analyzed by Fourier transform infrared spectroscopy, UV-visible absorbance and photoluminescence. Photoluminescent material was deposited by RIR-MAPLE and 248-nm MAPLE, while the RIR-PLD and 193-nm-MAPLE depositions displayed the smoothest surfaces but did not show photoluminescence. (C) 2003......-PLD). For the first time resonant infrared matrix assisted pulsed laser evaporation (RIR-MAPLE) was successfully demonstrated on a luminescent polymer system. In addition to this, an excimer laser has been used for UV-MAPLE depositions at 193 and 248-nm irradiation. Films deposited onto NaCl and quartz substrates...

  6. The Dentin Sialoprotein (DSP) Domain Regulates Dental Mesenchymal Cell Differentiation through a Novel Surface Receptor.

    Science.gov (United States)

    Wan, Chunyan; Yuan, Guohua; Luo, Daoshu; Zhang, Lu; Lin, Heng; Liu, Huan; Chen, Lei; Yang, Guobin; Chen, Shuo; Chen, Zhi

    2016-07-19

    Dentin sialophosphoprotein (DSPP) is a dentin extracellular matrix protein that is processed into dentin sialoprotein (DSP), dentin glycoprotein (DGP) and dentin phosphoprotein (DPP). DSP is mainly expressed in odontoblasts. We hypothesized that DSP interacts with cell surface receptors and subsequently activates intracellular signaling. Using DSP as bait for screening a protein library, we demonstrate that DSP acts as a ligand and binds to integrin β6. The 36 amino acid residues of DSP are sufficient to bind to integrin β6. This peptide promoted cell attachment, migration, differentiation and mineralization of dental mesenchymal cells. In addition, DSP (aa183-219) stimulated phosphorylation of ERK1/2 and P38 kinases. This activation was inhibited by an anti-integrin β6 antibody and siRNA. Furthermore, we demonstrate that this DSP fragment induces SMAD1/5/8 phosphorylation and nuclear translocation via ERK1/2 and P38 signaling. SMAD1/5/8 binds to SMAD binding elements (SBEs) in the DSPP gene promoter. SBE mutations result in a decrease in DSPP transcriptional activity. Endogenous DSPP expression was up-regulated by DSP (aa183-219) in dental mesenchymal cells. The data in the current study demonstrate for the first time that this DSP domain acts as a ligand in a RGD-independent manner and is involved in intracellular signaling via interacting with integrin β6. The DSP domain regulates DSPP expression and odontoblast homeostasis via a positive feedback loop.

  7. Domain of dentine sialoprotein mediates proliferation and differentiation of human periodontal ligament stem cells.

    Directory of Open Access Journals (Sweden)

    Alkan Ozer

    Full Text Available Classic embryological studies have documented the inductive role of root dentin on adjacent periodontal ligament differentiation.  The biochemical composition of root dentin includes collagens and cleavage products of dentin sialophosphoprotein (DSPP, such as dentin sialoprotein (DSP.  The high abundance of DSP in root dentin prompted us to ask the question whether DSP or peptides derived thereof would serve as potent biological matrix components to induce periodontal progenitors to further differentiate into periodontal ligament cells. Here, we test the hypothesis that domain of DSP influences cell fate. In situ hybridization and immunohistochemical analyses showed that the COOH-terminal DSP domain is expressed in mouse periodontium at various stages of root development. The recombinant COOH-terminal DSP fragment (rC-DSP enhanced attachment and migration of human periodontal ligament stem cells (PDLSC, human primary PDL cells without cell toxicity. rC-DSP induced PDLSC cell proliferation as well as differentiation and mineralization of PDLSC and PDL cells by formation of mineralized tissue and ALPase activity. Effect of rC-DSP on cell proliferation and differentiation was to promote gene expression of tooth/bone-relate markers, transcription factors and growth factors. The results for the first time showed that rC-DSP may be one of the components of cell niche for stimulating stem/progenitor cell proliferation and differentiation and a natural scaffold for periodontal regeneration application.

  8. The role of proteoglycans in the nanoindentation creep behavior of human dentin.

    Science.gov (United States)

    Bertassoni, Luiz E; Kury, Matheus; Rathsam, Catherine; Little, Christopher B; Swain, Michael V

    2015-03-01

    Attempts to understand the mechanical behavior of dentin and other mineralized tissues have been primarily focused on the role of their more abundant matrix components, such as collagen and hydroxyapatite. The structural mechanisms endowing these biological materials with outstanding load bearing properties, however, remain elusive to date. Furthermore, while their response to deformation has been extensively studied, mechanisms contributing to their recovery from induced deformation remain poorly described in the literature. Here, we offer novel insights into the participation of proteoglycans (PG) and glycosaminoglycans (GAG) in regulating the nanoindentation creep deformation and recovery of mineralized and demineralized dentin. Accordingly, after the enzymatic digestion of either PGs and associated GAGs or only GAGs, the nanoindentation creep deformation of dentin increased significantly, while the relative recovery of both the mineralized and demineralized dentin dropped by 40-70%. In summary, our results suggest that PGs and GAGs may participate in a nanoscale mechanism that contributes significantly to the outstanding durability of dentin and possibly other mineralized tissues of similar composition.

  9. Spatial organization and mechanical properties of the pericellular matrix on chondrocytes.

    Science.gov (United States)

    McLane, Louis T; Chang, Patrick; Granqvist, Anna; Boehm, Heike; Kramer, Anthony; Scrimgeour, Jan; Curtis, Jennifer E

    2013-03-05

    A voluminous polymer coat adorns the surface of many eukaryotic cells. Although the pericellular matrix (PCM) often extends several microns from the cell surface, its macromolecular structure remains elusive. This massive cellular organelle negotiates the cell's interaction with surrounding tissue, influencing important processes such as cell adhesion, mitosis, locomotion, molecular sequestration, and mechanotransduction. Investigations of the PCM's architecture and function have been hampered by the difficulty of visualizing this invisible hydrated structure without disrupting its integrity. In this work, we establish several assays to noninvasively measure the ultrastructure of the PCM. Optical force probe assays show that the PCM of rat chondrocyte joint (RCJ-P) cells easily reconfigures around optically manipulated microparticles, allowing the probes to penetrate into rather than compress the matrix. We report distinct changes in forces measured from PCMs treated with exogenous aggrecan, illustrating the assay's potential to probe proteoglycan distribution. Measurements reveal an exponentially increasing osmotic force in the PCM arising from an inherent concentration gradient. With this result, we estimate the variation of the PCM's mesh size (correlation length) to range from ∼100 nm at the surface to 500 nm at its periphery. Quantitative particle exclusion assays confirm this prediction and show that the PCM acts like a sieve. These assays provide a much-needed tool to study PCM ultrastructure and its poorly defined but important role in fundamental cellular processes. Copyright © 2013 Biophysical Society. Published by Elsevier Inc. All rights reserved.

  10. Process for the manufacture of seamless metal-clad fiber-reinforced organic matrix composite structures

    Science.gov (United States)

    Bluck, Raymond M. (Inventor); Bush, Harold G. (Inventor); Johnson, Robert R. (Inventor)

    1991-01-01

    A process for producing seamless metal-clad composite structures includes providing a hollow, metallic inner member and an outer sleeve to surround the inner member and define an inner space therebetween. A plurality of continuous reinforcing fibers is attached to the distal end of the outside diameter of the inner member, and the inner member is then introduced, distal end first, into one end of the outer sleeve. The inner member is then moved, distal end first, into the outer sleeve until the inner member is completely enveloped by the outer sleeve. A liquid matrix material is then injected into the space containing the reinforcing fibers between the inner member and the outer sleeve. Next a pressurized heat transfer medium is passed through the inner member to cure the liquid matrix material. Finally, the wall thickness of both the inner member and the outer sleeve are reduced to desired dimensions by chemical etching, which adjusts the thermal expansion coefficient of the metal-clad composite structure to a desired value.

  11. Genetic Background is a Key Determinant of Glomerular Extracellular Matrix Composition and Organization.

    Science.gov (United States)

    Randles, Michael J; Woolf, Adrian S; Huang, Jennifer L; Byron, Adam; Humphries, Jonathan D; Price, Karen L; Kolatsi-Joannou, Maria; Collinson, Sophie; Denny, Thomas; Knight, David; Mironov, Aleksandr; Starborg, Toby; Korstanje, Ron; Humphries, Martin J; Long, David A; Lennon, Rachel

    2015-12-01

    Glomerular disease often features altered histologic patterns of extracellular matrix (ECM). Despite this, the potential complexities of the glomerular ECM in both health and disease are poorly understood. To explore whether genetic background and sex determine glomerular ECM composition, we investigated two mouse strains, FVB and B6, using RNA microarrays of isolated glomeruli combined with proteomic glomerular ECM analyses. These studies, undertaken in healthy young adult animals, revealed unique strain- and sex-dependent glomerular ECM signatures, which correlated with variations in levels of albuminuria and known predisposition to progressive nephropathy. Among the variation, we observed changes in netrin 4, fibroblast growth factor 2, tenascin C, collagen 1, meprin 1-α, and meprin 1-β. Differences in protein abundance were validated by quantitative immunohistochemistry and Western blot analysis, and the collective differences were not explained by mutations in known ECM or glomerular disease genes. Within the distinct signatures, we discovered a core set of structural ECM proteins that form multiple protein-protein interactions and are conserved from mouse to man. Furthermore, we found striking ultrastructural changes in glomerular basement membranes in FVB mice. Pathway analysis of merged transcriptomic and proteomic datasets identified potential ECM regulatory pathways involving inhibition of matrix metalloproteases, liver X receptor/retinoid X receptor, nuclear factor erythroid 2-related factor 2, notch, and cyclin-dependent kinase 5. These pathways may therefore alter ECM and confer susceptibility to disease.

  12. Laboratory Experiments to Evaluate Matrix Diffusion of Dissolved Organic Carbon Carbon-14 in Southern Nevada Fractured-rock Aquifers

    Energy Technology Data Exchange (ETDEWEB)

    Hershey, Ronald L. [Nevada University, Reno, NV (United States). Desert Research Institute; Fereday, Wyatt [Nevada University, Reno, NV (United States). Desert Research Institute

    2016-05-01

    Dissolved inorganic carbon (DIC) carbon-14 (14C) is used to estimate groundwater ages by comparing the DIC 14C content in groundwater in the recharge area to the DIC 14C content in the downgradient sampling point. However, because of chemical reactions and physical processes between groundwater and aquifer rocks, the amount of DIC 14C in groundwater can change and result in 14C loss that is not because of radioactive decay. This loss of DIC 14C results in groundwater ages that are older than the actual groundwater ages. Alternatively, dissolved organic carbon (DOC) 14C in groundwater does not react chemically with aquifer rocks, so DOC 14C ages are generally younger than DIC 14C ages. In addition to chemical reactions, 14C ages may also be altered by the physical process of matrix diffusion. The net effect of a continuous loss of 14C to the aquifer matrix by matrix diffusion and then radioactive decay is that groundwater appears to be older than it actually is. Laboratory experiments were conducted to measure matrix diffusion coefficients for DOC 14C in volcanic and carbonate aquifer rocks from southern Nevada. Experiments were conducted using bromide (Br-) as a conservative tracer and 14C-labeled trimesic acid (TMA) as a surrogate for groundwater DOC. Outcrop samples from six volcanic aquifers and five carbonate aquifers in southern Nevada were used. The average DOC 14C matrix diffusion coefficient for volcanic rocks was 2.9 x 10-7 cm2/s, whereas the average for carbonate rocks was approximately the same at 1.7 x 10-7 cm2/s. The average Br- matrix diffusion coefficient for volcanic rocks was 10.4 x 10-7 cm2/s, whereas the average for carbonate rocks was less at 6.5 x 10-7 cm2/s. Carbonate rocks exhibited greater variability in

  13. MATRIX-VBS: implementing an evolving organic aerosol volatility in an aerosol microphysics model

    OpenAIRE

    Gao, Chloe Y.; Tsigaridis, Kostas; Bauer, Susanne E.

    2016-01-01

    We have implemented an existing aerosol microphysics scheme into a box model framework and extended it to represent gas-particle partitioning and chemical ageing of semi-volatile organic aerosols. We then applied this new research tool to investigate the effects of semi-volatile organic species on the growth, composition and mixing state of aerosol particles in case studies representing several different environments. The volatility-basis set (VBS) framework is implemented into the aerosol mi...

  14. The hyaluronan and proteoglycan link proteins: Organizers of the brain extracellular matrix and key molecules for neuronal function and plasticity.

    Science.gov (United States)

    Oohashi, Toshitaka; Edamatsu, Midori; Bekku, Yoko; Carulli, Daniela

    2015-12-01

    The hyaluronan and proteoglycanbinding link protein (Hapln) is a key molecule in the formation and control of hyaluronan-based condensed perineuronal matrix in the adult brain. This review summarizes the recent advances in understanding the role of Haplns in the formation and control of two distinct types of perineuronal matrices, one for "classical" PNN and the other for the specialized extracellular matrix (ECM) at the node of Ranvier in the central nervous system (CNS). We introduce the structural components of each ECM organization including the basic concept of supramolecular structure named "HLT model". We furthermore summarize the developmental and physiological role of perineuronal ECMs from the studies of Haplns and related molecules. Finally, we also discuss the potential mechanism modulating PNNs in the adult CNS. This layer of organized matrices may exert a direct effect via core protein or sugar moiety from the structure or by acting as a binding site for biologically active molecules, which are important for neuronal plasticity and saltatory conduction. Copyright © 2015 Elsevier Inc. All rights reserved.

  15. Matrix-Isolation Spectroscopy of Reactive Organic Molecules of Relevance to Interstellar Space

    Science.gov (United States)

    Kopff, Laura A.; Nolan, Alex M.; Kreifels, Terese A.; Draxler, Thomas W.; Esselman, Brian J.; Burrmann, Nicola J.; McMahon, Robert J.

    2010-11-01

    Matrix isolation, the process of trapping a molecule in an inert gas at low temperature, provides a means for studying highly reactive intermediates, such as carbenes or radicals. Reactive species can be characterized by IR, UV-vis and/or EPR spectroscopy. Comparison of experimental and computed spectral data, as well as chemical reactivity, is used for structural assignment Triplet propynylidene is proposed to exist in the interstellar medium (ISM), due to the detection of a higher-energy isomers via rotational spectroscopy. Currently, we are exploring the structural and photochemical effects of varying substituents on the propynylidne system. A diazo precursor has been synthesized and photolyzed to produce dimethylpropynylidene in an argon matrix. A photochemical hydrogen shift to produce 1-penten-3-yne has been observed through infrared spectroscopy. Cyanocarbons are known to be abundant in the ISM and the atmosphere of Titan, however matrixisolation studies have not yet been carried out for a significant number of these compounds. Photolysis of 3-cyano-3-methyldiazirine should yield methylcyanocarbene, one of the simplest species in this family. Another molecule of interest is l-HC4N, which has been detected in the ISM, but has not yet been matrix-isolated and characterized. The study of arylcarbenes is vital to understanding the chemistry of carbon-rich environments, such as discharges, interstellar clouds, and circumstellar envelopes. The identification of small, sulfur containing molecules, and the identification of aromatics in the ISM make future thiophene and benzothiophene detections a real possibility. Studies on 2- and 3-diazomethyl substituted benzothiophenes are underway to assess their photochemical reactivity and potential for forming benzothiophene carbenes. Macrocylic polyynes are proposed to be involved in carbon condensation via the ring coalescence and annealing model to produce graphitic sheets or fullerenes. To simplify a complex system we

  16. Immunolocalization of epithelial and mesenchymal matrix constituents in association with inner enamel epithelial cells.

    Science.gov (United States)

    Bosshardt, D D; Nanci, A

    1998-02-01

    After crown formation, the enamel organ reorganizes into Hertwig's epithelial root sheath (HERS). Although it is generally accepted that HERS plays an inductive role during root formation, it also has been suggested that it may contribute enamel-related proteins to cementum matrix. By analogy to the enamel-free area (EFA) in rat molars, in which epithelial cells express not only enamel proteins but also "typical" mesenchymal matrix constituents, it has been proposed that HERS cells may also have the potential to produce cementum proteins. To test this hypothesis, we examined the nature of the first matrix layer deposited along the cervical portion of root dentin and the characteristics of the associated cells. Rat molars were processed for postembedding colloidal gold immunolabeling with antibodies to amelogenin (AMEL), ameloblastin (AMBN), bone sialoprotein (BSP), and osteopontin (OPN). To minimize the possibility of false-negative results, several antibodies to AMEL were used. The labelings were compared with those obtained at the EFA. Initial cementum matrix was consistently observed at a time when epithelial cells from HERS covered most of the forming root surface. Cells with mesenchymal characteristics were rarely seen in proximity to the matrix. Both the EFA matrix and initial cementum exhibited collagen fibrils and were intensely immunoreactive for BSP and OPN. AMEL and AMBN were immunodetected at the EFA but not over the initial cementum proper. These two proteins were, however, present at the cervical-most portion of the root where enamel matrix extends for a short distance between dentin and cementum. These data suggest that epithelial cells along the root surface are likely responsible for the deposition of the initial cementum matrix and therefore, like the cells at the EFA, may be capable of producing mesenchymal proteins.

  17. Voltage Drop Compensation Method for Active Matrix Organic Light Emitting Diode Displays

    Science.gov (United States)

    Choi, Sang-moo; Ryu, Do-hyung; Kim, Keum-nam; Choi, Jae-beom; Kim, Byung-hee; Berkeley, Brian

    2011-03-01

    In this paper, the conventional voltage drop compensation methods are reviewed and the novel design and driving scheme, the advanced power de-coupled (aPDC) driving method, is proposed to effectively compensate the voltage IR drop of active matrix light emitting diode (AMOLED) displays. The advanced PDC driving scheme can be applied to general AMOLED pixel circuits that have been developed with only minor modification or without requiring modification in pixel circuit. A 14-in. AMOLED panel with the aPDC driving scheme was fabricated. Long range uniformity (LRU) of the 14-in. AMOLED panel was improved from 43% without the aPDC driving scheme, to over 87% at the same brightness by using the scheme and the layout complexity of the panel with new design scheme is less than that of the panel with the conventional design scheme.

  18. Tensile bond strength and SEM evaluation of caries-affected dentin using dentin adhesives.

    Science.gov (United States)

    Nakajima, M; Sano, H; Burrow, M F; Tagami, J; Yoshiyama, M; Ebisu, S; Ciucchi, B; Russell, C M; Pashley, D H

    1995-10-01

    Tensile bond strength measurements are commonly used for the evaluation of dentin adhesive systems. Most tests are performed using extracted non-carious human or bovine dentin. However, the adhesion of resins to caries-affected dentin is still unclear. The objectives of this study were to test the hypothesis that bonding to caries-affected dentin is inferior to bonding to normal dentin, and that the quality of the hybrid layer plays a major role in creating good adhesion. We used a micro-tensile bond strength test to compare test bond strengths made to either caries-affected dentin or normal dentin, using three commercial adhesive systems (All Bond 2, Scotchbond Multi-Purpose, and Clearfil Liner Bond II). For scanning electron microscopy, the polished interfaces between the adhesive bond and dentin were subjected to brief exposure to 10% phosphoric acid solution and 5% sodium hypochlorite, so that the quality of the hybrid layers could be observed. Bonding to normal dentin with either All Bond 2 (26.9 +/- 8.8 MPa) or Clearfil Liner Bond II (29.5 +/- 10.9 MPa) showed tensile bond strengths higher than those to caries-affected dentin (13.0 +/- 3.6 MPa and 14.0 +/- 4.3 MPa, respectively). The tensile bond strengths obtained with Scotchbond Multi-Purpose were similar in normal and caries-affected dentin (20.3 +/- 5.5 MPa and 18.5 +/- 4.0 MPa, respectively). The hybrid layers created by All Bond 2 in normal dentin and by Clearfil Liner Bond II in normal or caries-affected dentin showed phosphoric acid and sodium hypochlorite resistance, whereas the hybrid layers created by All Bond 2 in caries-affected dentin and those created by Scotchbond Multi-Purpose to normal and caries-affected dentin showed partial susceptibility to the acid and sodium hypochlorite treatment. The results indicate that the strength of adhesion to dentin depends upon both the adhesive system used and the type of dentin. Moreover, the quality of the hybrid layer may not always contribute

  19. Ectopic expression of dentin sialoprotein during amelogenesis hardens bulk enamel.

    Science.gov (United States)

    White, Shane N; Paine, Michael L; Ngan, Amanda Y W; Miklus, Vetea G; Luo, Wen; Wang, HongJun; Snead, Malcolm L

    2007-02-23

    Dentin sialophosphpoprotein (Dspp) is transiently expressed in the early stage of secretory ameloblasts. The secretion of ameloblast-derived Dspp is short-lived, correlates to the establishment of the dentinoenamel junction (DEJ), and is consistent with Dspp having a role in producing the specialized first-formed harder enamel adjacent to the DEJ. Crack diffusion by branching and dissipation within this specialized first-formed enamel close to the DEJ prevents catastrophic interfacial damage and tooth failure. Once Dspp is secreted, it is subjected to proteolytic cleavage that results in two distinct proteins referred to as dentin sialoprotein (Dsp) and dentin phosphoprotein (Dpp). The purpose of this study was to investigate the biological and mechanical contribution of Dsp and Dpp to enamel formation. Transgenic mice were engineered to overexpress either Dsp or Dpp in their enamel organs. The mechanical properties (hardness and toughness) of the mature enamel of transgenic mice were compared with genetically matched and age-matched nontransgenic animals. Dsp and Dpp contributions to enamel formation greatly differed. The inclusion of Dsp in bulk enamel significantly and uniformly increased enamel hardness (20%), whereas the inclusion of Dpp weakened the bulk enamel. Thus, Dsp appears to make a unique contribution to the physical properties of the DEJ. Dsp transgenic animals have been engineered with superior enamel mechanical properties.

  20. SEM evaluation of resin-carious dentin interfaces formed by two dentin adhesive systems

    Science.gov (United States)

    Hsu, Kuang-Wei; Marshall, Sally J.; Pinzon, Lilliam M.; Watanabe, Larry; Saiz, Eduardo; Marshall, Grayson W.

    2008-01-01

    Objectives We investigated the influence of dentin tubule direction and identifiable zone of carious dentin on the microstructure and the thickness of the hybrid-like layer (HL) formed by self-etch and etch-rinse adhesive systems. Methods An etch-rinse and a self-etching adhesive were bonded to dentin carious zones divided into groups with parallel or perpendicular orientation relative to the dentin tubules at the resin-carious dentin interface (N = 5/variable). Bonds were prepared to each of the four zones of carious dentin apparent after staining with Caries Detector: pink, light pink, transparent and apparently normal Six non-carious third molars were controls. The microstructure and thickness of the HL were determined by SEM.and compared using three-way ANOVA and Tukey's multiple comparisons (pcarious zone. PMID:18155289

  1. A study on matrix assisted pulsed evaporation (MAPLE) of organic materials

    DEFF Research Database (Denmark)

    Matei, Andreea; Canulescu, Stela; Constantinescu, Catalin

    2012-01-01

    Organic films can be produced either by MAPLE or directly by PLD (Pulsed laser deposition). For a reasonable deposition rate of ng/cm2 per pulse for film production by MAPLE a fluence of 1-1.5 J/cm2 is required at the laser wavelength of 355 nm, while the fluence can be considerably lower at 248 ...

  2. Dentine microhardness after different methods for detection and removal of carious dentine tissue.

    Science.gov (United States)

    Mollica, Fernanda Brandão; Rocha Gomes Torres, Carlos; Gonçalves, Sergio Eduardo de Paiva; Mancini, Maria Nadir Gasparoto

    2012-01-01

    There are several methods for identifying carious dentinal tissue aiming to avoid removal of healthy dentinal tissue. The purpose of this study was to test different methods for the detection of carious dentinal tissue regarding the amount of carious tissue removed and the remaining dentin microhardness after caries removal. The dentin surfaces of 20 bovine teeth were exposed and half of the surface was protected with nail polish. Cariogenic challenge was performed by immersion in a demineralizing solution for 14 days. After transverse cross-section of the crown, the specimens were divided into four groups (n=10), according to the method used to identify and remove the carious tissue: "Papacárie", Caries-detector dye, DIAGNOdent and Tactile method. After caries removal, the cross-sectional surface was included in acrylic resin and polished. In a microhardness tester, the removed dentin thickness and the Vickers microhardness of the following regions were evaluated: remaining dentin after caries removal and superficial and deep healthy dentin. ANOVA and Tukey's test (α=0.05) were performed, except for DIAGNOdent, which did not detect the presence of caries. Results for removed dentin thickness were: "Papacárie" (424.7 ± 105.0; a), Caries-detector dye (370.5 ± 78.3; ab), Tactile method (322.8 ± 51.5; bc). Results for the remaining dentin microhardness were: "Papacárie" (42.2 ± 10.5; bc), Caries-detector dye (44.6 ± 11.8; abc), Tactile method (24.3 ± 9.0; d). DIAGNOdent did not detect the presence of carious tissue; Tactile method and "Papacárie" resulted in the least and the most dentinal thickness removal, respectively; Tactile method differed significantly from "Papacárie" and Caries-detector dye in terms of the remaining dentin microhardness, and Tactile method was the one which presented the lowest microhardness values.

  3. [Nuclear protein matrix from giant nuclei of Chironomus plumosus determinates polythene chromosome organization].

    Science.gov (United States)

    Makarov, M S; Chentsov, Iu S

    2010-01-01

    Giant nuclei from salivary glands of Chironomus plumosus were treated in situ with detergent, 2 M NaCl and nucleases in order to reveal residual nuclear matrix proteins (NMP). It was shown, that preceding stabilization of non-histone proteins with 2 mM CuCl2 allowed to visualize the structure of polythene chromosomes at every stage of the extraction of histones and DNA. Stabilized NPM of polythene chromosomes maintains their morphology and banding patterns, which is observed by light and electron microscopy, whereas internal fibril net or residual nucleoli are not found. In stabilized NPM of polythene chromosomes, topoisomerase IIalpha and SMC1 retain their localization that is typical of untreated chromosomes. NPM of polythene chromosomes also includes sites of DNA replication, visualized with BrDU incubation, and some RNA-components. So, we can conclude that structure of NPM from giant nuclei is equal to NPM from normal interphase nuclei, and that morphological features of polythene chromosomes depend on the presence of NMP.

  4. Involvement of lipid peroxidation and organic peroxides in UVA-induced matrix metalloproteinase-1 expression.

    Science.gov (United States)

    Polte, Tobias; Tyrrell, Rex M

    2004-06-15

    Ultraviolet A (UVA) irradiation causes human skin aging and skin cancer at least partially through the activation of matrix metalloproteinases (MMPs). MMP-1, the interstitial collagenase, is responsible for the degradation of collagen and is involved in tumor progression in human skin. The present study uses human skin fibroblast cells (FEK4) to investigate the involvement of lipid peroxidation and the role of peroxides as possible mediators in MMP-1 activation by UVA. Preincubation with the antioxidants butylated hydroxytoluene and Trolox reduced UVA-dependent MMP-1 upregulation, suggesting that peroxidation of membrane lipids is involved. Blocking the iron-driven generation of lipid peroxides and hydroxyl radicals by different iron chelators led to a decrease in UVA-induced MMP-1 mRNA accumulation. Moreover, modulation of glutathione peroxidase activity by use of the specific inhibitor mercaptosuccinate (MS) or by the depletion of glutathione (using buthionine-S, R-sulfoximine, BSO), enhanced the UVA-dependent MMP-1 response. Finally, UVA irradiation generated a significant increase in intracellular peroxide levels which is augmented by pretreatment of the cells with BSO or MS. Our results demonstrate that lipid peroxidation and the production of peroxides are important events in the signalling pathway of MMP-1 activation by UVA.

  5. The effects of various irrigating solutions on intra-radicular dentinal surface: An SEM analysis

    Directory of Open Access Journals (Sweden)

    J V Karunakaran

    2012-01-01

    Full Text Available Aim: The action of irrigant solutions on intra- radicular dentinal surface were evaluated in an in vitro setting using a scanning electron microscope (SEM and it was observed that sodium hypochlorite and MTAD produced the cleanest surface and that none of the irrigants were able to produce an ideal preparation of the dentinal surface when used individually. The primary objective of endodontic therapy is to achieve a clean, optimal environment in root canals to avoid unsuccessful treatment outcomes. The complexities of the root canal system necessitate the use of irrigating solutions which act on radicular dentin surface, modifying it. The action of irrigants can be beneficial, and yet at the same time, as they modify the surface structure of dentin, they can have an adverse impact on the properties of dentin. The present study was undertaken to assess the effect of various irrigants on the dentinal surface using an SEM. Materials and Methods: Forty-five roots were randomly divided into nine groups (n=5 and prepared by sectioning at the level of cemento-enamel junction (CEJ and 10 mm from the CEJ and split longitudinally. The dentin surface was prepared and the cemental surfaces were coated with double layer of varnish. The irrigants tested were normal saline, de-ionized water, 17% ethylenediaminetetraacetic acid (EDTA, 5% sodium hypochlorite (NaOCl, 5% NaOCl with ultrasonic agitation, 3% hydrogen peroxide, 2% chlorhexidine (CHX, MTAD, and MTAD with ultrasonic agitation. The prepared samples were placed in the irrigant solution for 3 min, subsequently dehydrated, sputter coated, and observed under SEM. The images were subsequently analyzed for dentinal surface changes. Results: 17% EDTA and MTAD produced the cleanest dentinal surface. Ultrasonic agitation enhanced the effect of irrigants. 5% NaOCl and 3% hydrogen peroxide were efficient at removal of organic debris, but were unable to remove the smear layer. De-ionized water, normal saline, and 2

  6. Optical Spectroscopy Study of Transparent Non-Carious Human Dentin and Dentin-Enamel Junction

    Energy Technology Data Exchange (ETDEWEB)

    Marshall, G.W.; Marshall, S.J.; Gallagher, R.R.; Demos, S.

    1999-12-14

    Improving our knowledge of the morphology, composition and properties of the dentin, enamel, and the dentin-enamel junction (DEJ) is vital for the development of improved restorative materials and clinical placement techniques. Most studies of dental tissues have used light microscopy for characterization. In our investigation, the spectroscopic properties of normal and non-carious transparent human root dentin, and the dentin-enamel junction were investigated using emission imaging microscopy, and micro-spectroscopy. Experimental results reveal new information on the structural and biochemical characteristics of these dental tissues.

  7. Biochemical composition of carious dentin and different layers of sound dentin.

    Science.gov (United States)

    Magnus, Larissa; Maltz, Marisa; Bavaresco, Caren; Bastos, Lucelen F; Hashizume, Lina N

    2013-01-01

    The aim of this study was to evaluate the concentrations of calcium (Ca), inorganic phosphate (Pi) and fluoride (F) in carious dentin and in different layers of sound dentin. The samples examined were 52 permanent teeth (26 sound and 26 carious), which were subjected to two experiments to assess the mineral content of: 1) two layers (internal and external) of sound dentin and 2) sound and carious dentin. Ca and Pi were analyzed using a colorimetric method with arsenazo III (C22H18As2N4O14S2) and molybdate reagents, and F was analyzed using a specific electrode. A non-parametric test, the Mann-Whitney test, was used to verify differences between groups. Sound dentin showed a higher concentration of fluoride in the internal layer than in the external layer (P = 0.03), but no inter-layer differences in Ca or Pi concentration were evident. Lower concentrations of Ca, Pi and F were observed in carious dentin than in sound dentin (P carious dentin has lower concentrations of Ca, Pi and F than sound dentin.

  8. Liquid crystal-based Mueller matrix spectral imaging polarimetry for parameterizing mineral structural organization.

    Science.gov (United States)

    Gladish, James C; Duncan, Donald D

    2017-01-20

    Herein, we discuss the remote assessment of the subwavelength organizational structure of a medium. Specifically, we use spectral imaging polarimetry, as the vector nature of polarized light enables it to interact with optical anisotropies within a medium, while the spectral aspect of polarization is sensitive to small-scale structure. The ability to image these effects allows for inference of spatial structural organization parameters. This work describes a methodology for revealing structural organization by exploiting the Stokes/Mueller formalism and by utilizing measurements from a spectral imaging polarimeter constructed from liquid crystal variable retarders and a liquid crystal tunable filter. We provide results to validate the system and then show results from measurements on a mineral sample.

  9. Substrate patterning for passive matrix organic light-emitting devices by photolithography processing

    Science.gov (United States)

    Wang, Jun; Yu, Jun-sheng; Lin, Hui; Lou, Shuang-ling; Jiang, Ya-dong

    2007-12-01

    The fabrication technology of high resolution substrate pattern for organic light-emitting devices (OLEDs) was discussed in the paper. Surface morphology and crystallization properties of ITO films and the shape of photolithography pattern were investigated. Experimental results show that three factors including deposition pressure, flow ratio of argon to oxygen and annealing temperature greatly influence the conductance of ITO film.. Some attempts about designing photomask were enumerated and the reverse taper angle separator was successfully fabricated with image reversal process.

  10. Organ heterogeneity of host-derived matrix metalloproteinase expression and its involvement in multiple-organ metastasis by lung cancer cell lines.

    Science.gov (United States)

    Shiraga, Minoru; Yano, Seiji; Yamamoto, Akihiko; Ogawa, Hirohisa; Goto, Hisatsugu; Miki, Toyokazu; Miki, Keisuke; Zhang, Helong; Sone, Saburo

    2002-10-15

    Cancer metastasis is tightly regulated by the interaction of tumor cells and host organ microenvironments. Matrix metalloproteinases (MMPs), produced by both tumor cells and host stromal cells, play a central role in tumor invasion and angiogenesis. We determined whether metastatic potential of lung cancer to multiple organs is dependent solely on the expression of MMPs by tumor cells, using two metastasis models of human lung cancer cell lines expressing various levels of MMPs and a MMP inhibitor (ONO-4817). In the lung metastasis model, tumor cells (PC14, PC14PE6, H226, A549) inoculated i.v. into nude or SCID mice metastasized only in the lung. In the multiple-organ metastasis model, tumor cells (RERF-LC-AI, SBC-3/DOX, H69/VP, which express low levels of MMPs) inoculated i.v. into natural killer cell-depleted SCID mice metastasized into the liver, kidneys, and systemic lymph nodes. Film in situ zymography analysis revealed that the nontumor parenchyma of the lung had no gelatinolytic activity, whereas gelatinolytic activity of the liver and kidney was high and low, respectively. In the lung metastasis model, gelatinolytic activity of lung nodules directly correlated with the in vitro expression of MMP-2 and MMP-9 by tumor cells. Inhibition of MMP activity by ONO-4817 suppressed lung metastasis by the cell lines that expressed MMPs, but not those that did not express MMP, via the inhibition of MMP activity of lung tumors. In the multiple-organ metastasis model, liver parenchyma, but not liver nodules, showed gelatinolytic activity. The MMP inhibition reduced metastasis to the liver, but not to the kidney or lymph nodes, via inhibition of MMP activity of liver parenchyma. These findings suggest that MMP expression varies among the host organ microenvironments and that stromal MMPs may promote metastasis of lung cancer. Therefore, antimetastatic effects based on MMP inhibition may be dependent on MMPs derived not only from tumor cells but also from organ

  11. Can Positive Matrix Factorization identify sources of organic trace gases at the continental GAW site Hohenpeissenberg?

    Directory of Open Access Journals (Sweden)

    M. Leuchner

    2014-03-01

    Full Text Available From the rural Global Atmosphere Watch (GAW site Hohenpeissenberg in the pre-alpine area of Southern Germany, a dataset of 24 C2–C8 non-methane hydrocarbons over a period of seven years was analyzed. Receptor modeling was performed by Positive Matrix Factorization (PMF and the resulting factors were compared to literature source profiles. Photochemical aging during transport to the relatively remote site violates the PMF prerequisite of mass conservation from source to receptor. However, previous studies showed plausible results with this method at remote sites; the applicability and restrictions of the PMF model to such a remote dataset and the influence of photochemical processing on the interpretability of the results are discussed. A six factor solution showed a high stability and the most plausible results. In addition to biogenic sources and remote sources of very stable compounds – reflecting the continental background – four additional anthropogenic factors were resolved that could be divided into two short- and two long-lived patterns from evaporative sources and incomplete combustion processes, respectively. A method to increase the uncertainty for each individual compound by including photochemical reactivity did not improve the results, but decreased the stability of the model output. The contribution of the different source categories at the site over the entire period was, in decreasing order: remote sources, long-lived evaporative sources, residential heating and long-lived combustion sources, short-lived evaporative sources, short-lived combustion sources, and biogenic sources. Despite a low overall impact, biogenic sources played an important role during summer, in particular in terms of reactivity.

  12. Matrix-Isolation Spectroscopy and Computational Studies of Reactive Organic Molecules of Relevance to Interstellar Space

    Science.gov (United States)

    Kopff, Laura A.; Kreifels, Terese A.; Schaffer, Christopher J.; Haenni, Benjamin C.; Esselman, Brian J.; McMahon, Robert J.

    2011-10-01

    Matrix isolation, the process of trapping a molecule in an inert gas at low temperature, provides a means for studying highly reactive intermediates, such as carbenes or radicals. Reactive species can be characterized by IR, UV-vis and/or EPR spectroscopy. Comparison of experimental and computed spectral data, as well as chemical reactivity, is used for structural assignment. Highly-unsaturated carbon chains are well known compounds in the interstellar medium (ISM). Detection of these molecules relies mostly on radioastronomy, making the detection of the linear HC2nH series difficult. The electronic structure changes from even carbon chain lengths (HC2nH) to odd chain lengths (HC2n+1H), changing from closed shell to open shell species. The odd series further alternate from a diradical character (HC3H) to a localized carbene (HC5H). This poster will present the synthesis and spectroscopy of the HC3H and HC7H species and derivatives. The study of arylcarbenes is vital to understanding the chemistry of carbon-rich environments, such as discharges, interstellar clouds, and circumstellar envelopes. The identification of small, sulfur containing molecules, and the identification of aromatics in the ISM make future thiophene and benzothiophene detections a real possibility. Studies on 2- and 3- diazomethyl substituted benzothiophenes are underway to assess their photochemical reactivity and potential for forming benzothiophene carbenes. Macrocylic polyynes are proposed to be involved in carbon condensation via the ring coalescence and annealing model to produce graphitic sheets or fullerenes. To simplify a complex system we are computationally studying the series of ethynyl-substituted cyclobutadienes and their possible involvement in the build-up of larger carbon containing molecules in the ISM.

  13. Hierarchical self-assembly: Self-organized nanostructures in a nematically ordered matrix of self-assembled polymeric chains

    Science.gov (United States)

    Mubeena, Shaikh; Chatterji, Apratim

    2015-03-01

    We report many different nanostructures which are formed when model nanoparticles of different sizes (diameter σn) are allowed to aggregate in a background matrix of semiflexible self-assembled polymeric wormlike micellar chains. The different nanostructures are formed by the dynamical arrest of phase-separating mixtures of micellar monomers and nanoparticles. The different morphologies obtained are the result of an interplay of the available free volume, the elastic energy of deformation of polymers, the density (chemical potential) of the nanoparticles in the polymer matrix, and, of course, the ratio of the size of self-assembling nanoparticles and self-avoidance diameter of polymeric chains. We have used a hybrid semi-grand-canonical Monte Carlo simulation scheme to obtain the (nonequilibrium) phase diagram of the self-assembled nanostructures. We observe rodlike structures of nanoparticles which get self-assembled in the gaps between the nematically ordered chains, as well as percolating gel-like network of conjoined nanotubes. We also find a totally unexpected interlocked crystalline phase of nanoparticles and monomers, in which each crystal plane of nanoparticles is separated by planes of perfectly organized polymer chains. We identified the condition which leads to such interlocked crystal structure. We suggest experimental possibilities of how the results presented in this paper could be used to obtain different nanostructures in the laboratory.

  14. Hierarchical self-assembly: Self-organized nanostructures in a nematically ordered matrix of self-assembled polymeric chains.

    Science.gov (United States)

    Mubeena, Shaikh; Chatterji, Apratim

    2015-03-01

    We report many different nanostructures which are formed when model nanoparticles of different sizes (diameter σn) are allowed to aggregate in a background matrix of semiflexible self-assembled polymeric wormlike micellar chains. The different nanostructures are formed by the dynamical arrest of phase-separating mixtures of micellar monomers and nanoparticles. The different morphologies obtained are the result of an interplay of the available free volume, the elastic energy of deformation of polymers, the density (chemical potential) of the nanoparticles in the polymer matrix, and, of course, the ratio of the size of self-assembling nanoparticles and self-avoidance diameter of polymeric chains. We have used a hybrid semi-grand-canonical Monte Carlo simulation scheme to obtain the (nonequilibrium) phase diagram of the self-assembled nanostructures. We observe rodlike structures of nanoparticles which get self-assembled in the gaps between the nematically ordered chains, as well as percolating gel-like network of conjoined nanotubes. We also find a totally unexpected interlocked crystalline phase of nanoparticles and monomers, in which each crystal plane of nanoparticles is separated by planes of perfectly organized polymer chains. We identified the condition which leads to such interlocked crystal structure. We suggest experimental possibilities of how the results presented in this paper could be used to obtain different nanostructures in the laboratory.

  15. Deposition of organic dyes for dye-sensitized solar cell by using matrix-assisted pulsed laser evaporation

    Directory of Open Access Journals (Sweden)

    Chih-Ping Yen

    2016-08-01

    Full Text Available The deposition of various distinct organic dyes, including ruthenium complex N3, melanin nanoparticle (MNP, and porphyrin-based donor-π-acceptor dye YD2-o-C8, by using matrix-assisted pulsed laser evaporation (MAPLE for application to dye-sensitized solar cell (DSSC is investigated systematically. It is found that the two covalently-bonded organic molecules, i.e., MNP and YD2-o-C8, can be transferred from the frozen target to the substrate with maintained molecular integrity. In contrast, N3 disintegrates in the process, presumably due to the lower bonding strength of metal complex compared to covalent bond. With the method, DSSC using YD2-o-C8 is fabricated, and an energy conversion efficiency of 1.47% is attained. The issue of the low penetration depth of dyes deposited by MAPLE and the possible resolution to it are studied. This work demonstrates that MAPLE could be an alternative way for deposition of organic dyes for DSSC.

  16. Deposition of organic dyes for dye-sensitized solar cell by using matrix-assisted pulsed laser evaporation

    Science.gov (United States)

    Yen, Chih-Ping; Yu, Pin-Feng; Wang, Jyhpyng; Lin, Jiunn-Yuan; Chen, Yen-Mu; Chen, Szu-yuan

    2016-08-01

    The deposition of various distinct organic dyes, including ruthenium complex N3, melanin nanoparticle (MNP), and porphyrin-based donor-π-acceptor dye YD2-o-C8, by using matrix-assisted pulsed laser evaporation (MAPLE) for application to dye-sensitized solar cell (DSSC) is investigated systematically. It is found that the two covalently-bonded organic molecules, i.e., MNP and YD2-o-C8, can be transferred from the frozen target to the substrate with maintained molecular integrity. In contrast, N3 disintegrates in the process, presumably due to the lower bonding strength of metal complex compared to covalent bond. With the method, DSSC using YD2-o-C8 is fabricated, and an energy conversion efficiency of 1.47% is attained. The issue of the low penetration depth of dyes deposited by MAPLE and the possible resolution to it are studied. This work demonstrates that MAPLE could be an alternative way for deposition of organic dyes for DSSC.

  17. Deposition of organic dyes for dye-sensitized solar cell by using matrix-assisted pulsed laser evaporation

    Energy Technology Data Exchange (ETDEWEB)

    Yen, Chih-Ping [Department of Physics, National Taiwan University, Taipei 106, Taiwan (China); Institute of Atomic and Molecular Sciences, Academia Sinica, Taipei 106, Taiwan (China); Yu, Pin-Feng [Institute of Atomic and Molecular Sciences, Academia Sinica, Taipei 106, Taiwan (China); Department of Physics, National Chung Cheng University, Chiayi 621, Taiwan (China); Wang, Jyhpyng [Department of Physics, National Taiwan University, Taipei 106, Taiwan (China); Institute of Atomic and Molecular Sciences, Academia Sinica, Taipei 106, Taiwan (China); Department of Physics, National Central University, Taoyuan 320, Taiwan (China); Lin, Jiunn-Yuan [Department of Physics, National Chung Cheng University, Chiayi 621, Taiwan (China); Chen, Yen-Mu [SuperbIN Co., Ltd., Taipei 114, Taiwan (China); Chen, Szu-yuan, E-mail: sychen@ltl.iams.sinica.edu.tw [Institute of Atomic and Molecular Sciences, Academia Sinica, Taipei 106, Taiwan (China); Department of Physics, National Central University, Taoyuan 320, Taiwan (China)

    2016-08-15

    The deposition of various distinct organic dyes, including ruthenium complex N3, melanin nanoparticle (MNP), and porphyrin-based donor-π-acceptor dye YD2-o-C8, by using matrix-assisted pulsed laser evaporation (MAPLE) for application to dye-sensitized solar cell (DSSC) is investigated systematically. It is found that the two covalently-bonded organic molecules, i.e., MNP and YD2-o-C8, can be transferred from the frozen target to the substrate with maintained molecular integrity. In contrast, N3 disintegrates in the process, presumably due to the lower bonding strength of metal complex compared to covalent bond. With the method, DSSC using YD2-o-C8 is fabricated, and an energy conversion efficiency of 1.47% is attained. The issue of the low penetration depth of dyes deposited by MAPLE and the possible resolution to it are studied. This work demonstrates that MAPLE could be an alternative way for deposition of organic dyes for DSSC.

  18. The role of an organic matrix during the formation of siliceous scales in the heliozoon Actinophrys sol (actinophryida, protista).

    Science.gov (United States)

    Newman, P J; Patterson, D J

    1993-07-25

    Actinophrys sol is a freshwater heliozoon which has trophic and encysted body forms. During encystment, siliceous scales are laid down in silica deposition vesicles. The scales form one layer of a multi-layered cyst wall. Scale production is described using light microscopy, transmission electron microscopy, scanning electron microscopy, and X-ray microanalysis. Silica is laid down on an organic matrix which is visible prior to silicification and after removal of silica with hydrofluoric acid. Actinophrys sol can be cultured under silica impoverished conditions, with the result that the siliceous plates are absent. The cysts continue to form but are fragile. Silica is not a prerequisite for the processes of encystment and cyst formation. Copyright © 1993 Gustav Fischer Verlag · Stuttgart · Jena · New York. Published by Elsevier GmbH.. All rights reserved.

  19. A signal processing approach for enhanced Acoustic Emission data analysis in high activity systems: Application to organic matrix composites

    Science.gov (United States)

    Kharrat, M.; Ramasso, E.; Placet, V.; Boubakar, M. L.

    2016-03-01

    Structural elements made of Organic Matrix Composites (OMC) under complex loading may suffer from high Acoustic Emission (AE) activity caused by the emergence of different emission sources at high rates with high noise level, which finally engender continuous emissions. The detection of hits in this situation becomes a challenge particularly during fatigue tests. This work suggests an approach based on the Discrete Wavelet Transform (DWT) denoising applied on signal segments. A particular attention is paid to the adjustment of the denoising parameters based on pencil lead breaks and their influence on the quality of the denoised AE signals. The validation of the proposed approach is performed on a ring-shaped Carbon Fiber Reinforced Plastics (CFRP) under in-service-like conditions involving continuous emissions with superimposed damage-related transients. It is demonstrated that errors in hit detection are greatly reduced leading to a better identification of the natural damage scenario based on AE signals.

  20. Embedded Touch Sensing Circuit Using Mutual Capacitance for Active-Matrix Organic Light-Emitting Diode Display

    Science.gov (United States)

    Park, Young-Ju; Seok, Su-Jeong; Park, Sang-Ho; Kim, Ohyun

    2011-03-01

    We propose and simulate an embedded touch sensing circuit for active-matrix organic light-emitting diode (AMOLED) displays. The circuit consists of three thin-film transistors (TFTs), one fixed capacitor, and one variable capacitor. AMOLED displays do not have a variable capacitance characteristic, so we realized a variable capacitor to detect touches in the sensing pixel by exploiting the change in the mutual capacitance between two electrodes that is caused by touch. When a dielectric substance approaches two electrodes, the electric field is shunted so that the mutual capacitance decreases. We use the existing TFT process to form the variable capacitor, so no additional process is needed. We use advanced solid-phase-crystallization TFTs because of their stability and uniformity. The proposed circuit detects multi-touch points by a scanning process.

  1. Time-Domain Quaternary-Weighted Pulse Width Modulation Driving Method for Active Matrix Organic Light-Emitting Diode Displays

    Science.gov (United States)

    Park, Hyun-Sang; Kuk, Seung-Hee; Han, Min-Koo

    2008-03-01

    We proposed a new digital driving method and its pixel structure for active matrix organic light-emitting diode (AMOLED) displays employing time-domain quaternary-weighted pulse width modulation. In the new digital driving method, the luminance of AMOLED displays is accurately determined by averaging photon flux to the desired level over a frame period. The proposed pixel was verified by spice simulation and the output linearity between the grayscale and the OLED current was successfully achieved. In the proposed digital driving pixel, the timing margin was increased and the effect on luminance of AMOLED displays by the troublesome variation of the thin-film transistors (TFTs) was suppressed without additional compensation schemes.

  2. A New Low Temperature Polycrystalline Silicon Thin Film Transistor Pixel Circuit for Active Matrix Organic Light Emitting Diode

    Science.gov (United States)

    Fan, Ching-Lin; Lin, Yi-Yan; Chang, Jyu-Yu; Sun, Bo-Jhang; Liu, Yan-Wei

    2010-06-01

    This study presents one novel compensation pixel design and driving method for active matrix organic light-emitting diode (AMOLED) displays that use low-temperature polycrystalline silicon thin-film transistors (LTPS-TFTs) with a voltage feed-back method and the simulation results are proposed and verified by SPICE simulator. The measurement and simulation of LTPS TFT characteristics demonstrate the good fitting result. The proposed circuit consists of four TFTs and two capacitors with an additional signal line. The error rates of OLED anode voltage variation are below 0.3% under the threshold voltage deviation of driving TFT (ΔVTH = ±0.33 V). The simulation results show that the pixel design can improve the display image non-uniformity by compensating the threshold voltage deviation of driving TFT and the degradation of OLED threshold voltage at the same time.

  3. Time-dependent transition density matrix for visualizing charge-transfer excitations in photoexcited organic donor-acceptor systems

    Science.gov (United States)

    Li, Yonghui; Ullrich, Carsten

    2013-03-01

    The time-dependent transition density matrix (TDM) is a useful tool to visualize and interpret the induced charges and electron-hole coherences of excitonic processes in large molecules. Combined with time-dependent density functional theory on a real-space grid (as implemented in the octopus code), the TDM is a computationally viable visualization tool for optical excitation processes in molecules. It provides real-time maps of particles and holes which gives information on excitations, in particular those that have charge-transfer character, that cannot be obtained from the density alone. Some illustration of the TDM and comparison with standard density difference plots will be shown for photoexcited organic donor-acceptor molecules. This work is supported by NSF Grant DMR-1005651

  4. Leeuwenhoek and the structure of dentine.

    Science.gov (United States)

    O'Sullivan, R; Flannelly, M

    1990-01-01

    This short paper includes extracts from the original translations of Leeuwenhoek's descriptions of the histology of teeth, investigates his findings and demonstrates that in addition to describing dentinal tubules, he may have identified the presence of calcospherites within that tissue.

  5. INFLUENCE OF THE SKELETON HIERARCHICAL ORGANIZATION ON ELECTRONIC STATE OF IONS IN BONE MATRIX

    Directory of Open Access Journals (Sweden)

    A. S. Avrunin

    2016-01-01

    Full Text Available The authors suggested the 3D-superlattice (3DSL model to describe the effect of coplanar assembly of the hydroxyapatite (HA nanocrystallites on local electronic state of ions in mineralized bone. This model is based on the main structural and functional relationships between adjacent levels of the hierarchical organization of bone tissue. In the framework of the 3DSL model the authors predicted the distinct assembly-to-crystal red shift of the unoccupied electronic states located near the bottom of the conduction band in HA and dependence of this shift on the ratio of the thickness of the hydrated layer to the crystallite size. To check these predictions the experimental X-ray absorption studies of native bone are performed near the Ca2р1/2,3/2-, P2р1/2,3/2- и O1s edges. Comparison of the measured spectra with the known spectra of the reference compounds has confirmed appearance of the distinct assembly-to-crystal red shift. The observed effect is the ground for development of new diagnostic methods for bone status and imaging changes in the local electronic structure of bone tissue by using ultrasoft X-ray absorption spectroscopy and measuring the assembly-tocrystal shifts. The experimental data analysis proved the applicability of the 3DSL model for better understanding of the hierarchical organization of bone at nanolevel.

  6. Influence of Inorganic Ions and Organic Substances on the Degradation of Pharmaceutical Compound in Water Matrix

    Directory of Open Access Journals (Sweden)

    Edyta Kudlek

    2016-11-01

    Full Text Available The paper determined the influence of inorganic substances and high-molecular organic compounds on the decomposition of diclofenac, ibuprofen, and carbamazepine in the process of photocatalysis conducted with the presence of Titanium dioxide (TiO2. It was determined that the presence of such ions as CO 3 2 − , HCO 3 − , HPO 4 2 − as well as SO 4 2 − inhibited the decomposition of carbamazepine, whereas the efficiency of diclofenac degradation was decreased only by the presence of CO 3 2 − and HCO 3 − anions. In case of ibuprofen sodium salt (IBU, all investigated anions influenced the increase in its decomposition rate. The process of pharmaceutical photooxidation conducted in suspensions with Al3+ and Fe3+ cations was characterized by a significantly decreased efficiency when compared to the solution deprived of inorganic compounds. The addition of Ca2+, Mg2+ and NH4+ affected the increase of reaction rate constant value of diclofenac and ibuprofen decomposition. On the other hand, high molecular organic compounds present in the model effluent additionally catalysed the degradation process of pharmaceutical compounds and constituted an additional sorbent that enabled to decrease their concentration. Toxicological analysis conducted in deionized water with pharmaceutical compounds’ patterns proved the production of by-products from oxidation and/or reduction of micropollutants, which was not observed for model effluent irradiation.

  7. Quantitative PIXE analysis of powdered pottery samples bound in an organic matrix

    Science.gov (United States)

    Houdayer, A.; Lessard, L.; Brissaud, I.

    1984-04-01

    We have developed a method for preparing thin samples (about 1 mg/cm 2) of pottery powder by the centrifugal precipitation technique, using an organic binder (collodion). We measure accurately the amount of organic material in the samples by the p-p reaction. With this information, a good quantitative determination of the elemental composition of the samples by PIXE analysis is achieved. The sensitivity, accuracy and reproducibility of our method were verified by measuring the composition of several samples prepared with the standard pottery of Permian and Asaro. The abundances of 12 elements (from 1% to about 10 ppm) of Z ⩾ 22 have been determined with 3 MeV incident protons. The reproducibility and accuracy are very satisfactory. We have undertaken a systematic study of a collection of ceramic shards originating from Western Africa. The abundances of 18 elements of Z ⩾ 21 have been determined. The effect of the inhomogeneity of the ceramic composition is reflected in a fluctuation of the elemental composition of our samples.

  8. Evaluation of the interface between one-bottle adhesive systems and dentin by Goldner's trichrome.

    Science.gov (United States)

    Wang, Yong; Spencer, Paulette

    2005-02-01

    To evaluate the hybrid layers in interfaces between dentin and six contemporary one-bottle adhesive systems using a nondestructive differential staining micro-technique. The adhesive systems used in this study were divided to three groups based on hydrophilic/hydrophobic component ratios (i.e. ability to dissolve in water), from highest to lowest as follows: Group 1 (Dentastic UNO.DUO, PermaQuick PQ1) > Group 2 (One-Step, Primer&Bond NT) > Group 3 (Optibond Solo, Single Bond). The occlusal third of the crown was removed from 36 extracted, unerupted human 3rd molars. Smear layers were created by abrading the dentin with 600 grit SiC under water. The exposed dentin was treated with one of the adhesive systems per manufacturer's instructions. After 24 hours in water, 3-5 microm thin sections of the adhesive/dentin (adhesive/dentin ) interface were cut with a microtome and stained with Goldner's trichrome. Stained thin sections from each prepared tooth were imaged with light microscopy. The thickness and color difference of adhesive/dentin interfaces among these one-bottle adhesive systems were clearly visualized. The width of the hybrid layers varied, ranged from 4.1-9.2 microm for six adhesive systems. The color differences in the stained sections are reflected to the extent and degree to which the adhesive envelops the exposed collagen. Among these six bonding systems, resin encapsulation of collagen varied from highest to lowest as follows: Group 1 (UNO, PQ1) > Group 2 (OS, PBNT) > Group 3 (OP, SB). The differences in collagen encapsulation are dependent on the adhesive composition, or the ability to tolerate water during the infiltration of the wet demineralized matrix.

  9. Multi-factoriality of dentine hypersensitivity

    Directory of Open Access Journals (Sweden)

    Stojšin Ivana

    2008-01-01

    Full Text Available Introduction. Dentine hypersensitivity has been defined as a sharp, short pain arising from exposed dentin in response to stimuli typically thermal, evaporative tactile, osmoticor, chemical and which cannot be ascribed to any other form of dental defect or pathology. Prevalence. The most affected patients range in age from 20 to 40. The following teeth tend to be most sensitive: cuspids, premolars and incisors, location-concentrated on the facial surface. Morphological bases of dentine hypersensitivity Sensitive teeth have much greater numbers of open tubules per unit area and the average diameter of tubules is almost 2 times greater than tubules in nonsensitive teeth. Mechanisms of dentine hypersensitivity. The most widely accepted theory of how the pain occurs is Brannstroms theory. Etiology Dentine hypersensitivity represents a condition of presumable multifactorial pathology. Two processes are essential for its development: (1 dentin must be exposed through either genetic disturbance, enamel defect (lamellae, tufts and spindles, loss of enamel (erosion, abrasion, attrition, abfraction, gingival recession with rapid loss of cementum and (2 the dentin tubules must be open to both the oral cavity and the pulp. Diagnosis. Diagnostic protocol for this condition consisted of Medical, Dental Dietary, Oral Hygiene History and Intra-oral examinations with air indexing method. Differential Diagnosis: We must take into consideration a number of variables such as: dental caries, cracked tooth, restorative sensitivity, medication sensitivity, bleaching sensitivity and abscessed or non-vital tooth. Conclusion. Dentin hypersensitivity is a problem that bothes many patients. Many conditions share the symptoms of tooth sensitivity so differential diagnosis is essential for suitable treatment or preventive measures.

  10. Overexpression of Dmp1 fails to rescue the bone and dentin defects in Fam20C knockout mice.

    Science.gov (United States)

    Wang, Xiaofang; Wang, Jingya; Yuan, Baozhi; Lu, Yongbo; Feng, Jian Q; Qin, Chunlin

    2014-08-01

    FAM20C is a kinase phosphorylating the small-integrin-binding ligand, N-linked glycoproteins (SIBLINGs), a group of extracellular matrix proteins that are essential for bone and dentin formation. Previously, we showed that Sox2-Cre;Fam20Cfl/fl mice had bone and dentin defects, along with hypophosphatemia and significant downregulation of dentin matrix protein 1 (DMP1). While the assumed phosphorylation failure of the SIBLINGs is likely associated with the defects in the Fam20C-deficient mice, it remains unclear if the downregulation of Dmp1 contributes to these phenotypes. In this study, we crossed 3.6 kb Col1-Dmp1 transgenic mice with 3.6 kb Col1-Cre;Fam20Cfl/fl mice to overexpress Dmp1 in the mineralized tissues of Fam20C conditional knockout (cKO) mice. X-ray, micro-computed tomography, serum biochemistry and histology analyses showed that expressing the Dmp1 transgene failed to rescue the bone and dentin defects, as well as the serum levels of FGF23 and phosphate in the Fam20C-cKO mice. These results indicated that the downregulation of Dmp1 may not directly associate with, or significantly contribute to the bone and dentin defects in the Fam20C-cKO mice.

  11. Excitation Emission Matrix Spectra (EEMS) of Chromophoric Dissolved Organic Matter Produced during Microbial Incubation

    Science.gov (United States)

    McDonald, N.; Nelson, N. B.; Parsons, R.

    2013-12-01

    The chromophoric or light-absorbing fraction of dissolved organic matter (CDOM) is present ubiquitously in natural waters and has a significant impact on ocean biogeochemistry, affecting photosynthesis and primary production as well direct and indirect photochemical reactions (Siegel et al., 2002; Nelson et al., 2007). It has been largely researched in the past few decades, however the exact chemical composition remains unknown. Instrumental methods of analysis including simultaneous excitation-emission fluorescence spectra have allowed for further insight into source and chemical composition. While certain excitation-emission peaks have been associated with ';marine' sources, they have not been exclusively linked to bacterial production of CDOM (Coble, 1996; Zepp et al., 2004). In this study, ';grazer diluted' seawater samples (70% 0.2μm filtered water; 30% whole water) were collected at the Bermuda Atlantic Time Series (BATS) site in the Sargasso Sea (31° 41' N; 64° 10' W) and incubated with an amendment of labile dissolved organic carbon (10μM C6H12O6), ammonium (1μM NH4Cl) and phosphate (0.1μM K2HPO4) to facilitate bacterial production. These substrates and concentrations have been previously shown to facilitate optimum bacterial and CDOM production (Nelson et al., 2004). Sample depths were chosen at 1m and 200m as water at these depths has been exposed to UV light (the Subtropical Mode Water at 200m has been subducted from the surface) and therefore has low initial concentrations of CDOM. After the samples were amended, they were incubated at in-situ temperatures in the dark for 72 hours, with bacteria counts, UV-Vis absorption and EEMS measurements taken at 6-8 hour intervals. Dissolved organic carbon (DOC) measurements were collected daily. For the surface water experiment specific bacteria populations were investigated using Fluorescence In-Situ Hybridization (FISH) analysis. Results showed a clear production of bacteria and production of CDOM, which

  12. Current status of dentin adhesive systems.

    Science.gov (United States)

    Leinfelder, K F

    1998-12-01

    Undoubtedly, dentin bonding agents have undergone a major evolution during the last several years. The shear bond strength of composite resin to the surface of dentin is actually greater than the inherent strength of the dentin itself under well-controlled conditions. No longer must the clinician depend only upon the bonding to enamel as the sole bonding mechanism. Bonding to both types of dental structure permits even better reinforcement of the tooth itself. Perhaps even more important than the high level of bonding exhibited by the current dentin adhesives is their ability to seal the dentin. So effective is this sealing capability that it is now possible to protect the pulpal tissue from microbial invasion through the dentinal tubules. Further, by enclosing the odontoblastic processes and preventing fluid flow, the potential for postoperative sensitivity is diminished considerably. In fact, so evolutionary is the concept of bonding that the procedures associated with the restoration of teeth has changed dramatically. Undoubtedly, far greater improvements can be anticipated in the future.

  13. Remineralization of caries lesions extending into dentin.

    Science.gov (United States)

    ten Cate, J M

    2001-05-01

    Remineralization is one aspect of the overall process of tooth decay. However, it is primarily studied in shallow lesions. The aim of this study was to explore whether caries lesions in enamel and extending into the dentin can be remineralized. A single-section model was developed for the longitudinal and non-destructive monitoring of changes in enamel and dentin. Lesions at least 200 microm into dentin were formed in undersaturated acetate buffers. Next, the lesions were divided into groups (three treatment and one control) and remineralized. The treatments were: weekly immersion in 1,000 ppm fluoride, single treatment with methanehydroxybisphosphonate, and a constant level of 1 ppm fluoride. De- and remineralization was assessed by transverse microradiography. Remineralization was observed in enamel, but also in dentin, indicating that, deep into dentin, the pores become supersaturated to apatite formation. Treatments affected remineralization only in the outer part of enamel. Both findings are explained by a relatively fast diffusion of mineral ions, with precipitation being rate-limiting. The results suggest that dentin remineralization, underneath enamel, can be achieved and could possibly be used in clinical treatment strategies.

  14. A clinical perspective on dentin adhesives.

    Science.gov (United States)

    Eichmiller, F C

    1993-01-01

    The newer generation of dentin adhesives has changed the practice of restorative dentistry. Two features common to most of the bonding restorative materials are the ability to alter, through the use of acidic etching agents, the surface of the dentin and the ability to completely wet and re-infiltrate the altered dentin surface with a hydrophilic polymerizable monomer. The acidic etchants remove or break up the smear layer, partially demineralize and/or alter the mineral in the first few microns of the dentin surface, and expose the collagen fibril network. The hydrophilic adhesive monomers that contain both acidic and methacrylate groups on the same molecule are bifunctional in nature. These monomers are able to infiltrate the demineralized dentin due to their hydrophilic nature and polymerize to encapsulate the exposed collagen fibers. Available products can be divided into two broad categories: systems that contain a low concentration of adhesive monomer diluted in a volatile solvent and systems that use adhesive resins of moderate to high viscosity. Knowledge of the features and properties of dentin adhesives provides the needed rationale for the protocol of application and the proper choice of materials in restorative dentistry.

  15. Permeability of normal versus carious dentin.

    Science.gov (United States)

    Pashley, E L; Talman, R; Horner, J A; Pashley, D H

    1991-10-01

    Although a number of reports have been published demonstrating that carious dentin is less permeable than normal dentin, these reports have been qualitative rather than quantitative. The purpose of this in vitro study was to apply a quantitative technique to the study of the permeability of carious human teeth before and after excavation, before and after removal of the smear layer and before and after preparation of a control cavity of similar size and depth in normal dentin subjected to the same measurements, for comparative purposes. Dentin permeability was measured as a hydraulic conductance. The permeability values measured at each step in the protocol were expressed as a percent of the maximum permeability of both cavities, permitting each tooth the serve as its own control. Carious lesions exhibited a slight degree of permeability (2.3 +/- 0.6% of controls) which remained unchanged after excavation of the lesions. Removal of the smear layer in the excavated carious lesions increased the permeability significantly to 6.9 +/- 3.2%. Preparation of a control cavity of the same area and depth increased the permeability slightly. Removal of its smear layer increased the permeability of the dentin 91%. These results confirm previous qualitative studies that carious dentin, even after excavation and removal of the smear layer has a very low permeability.

  16. Tensile bond strength of hydroxyethyl methacrylate dentin bonding agent on dentin surface at various drying techniques

    Directory of Open Access Journals (Sweden)

    Kun Ismiyatin

    2010-06-01

    Full Text Available Background: There are several dentin surface drying techniques to provide a perfect resin penetration on dentin. There are two techniques which will be compared in this study. The first technique was by rubbing dentin surface gently using cotton pellet twice, this technique is called blot dry technique. The second technique is by air blowing dentin surface for one second and continued by rubbing dentin surface gently using moist cotton. Purpose: This experiment was aimed to examine the best dentin surface drying techniques after 37% phosphoric acid etching to obtain the optimum tensile bond strength between hydroxyethyl methacrylate (HEMA and dentin surface. Method: Bovine teeth was prepared flat to obtain the dentin surface and than was etched using 37% phosphoric acid for 15 seconds. After etching the dentin was cleaned using 20 cc plain water and dried with blot dry techniques (group I, or dried with air blow for one second (group II, or dried with air blow for one second, and continued with rubbing gently using moist cotton pellet (group III, and without any drying as control group (group IV. After these drying, the dentin surfaces were applied with resin dentin bonding agent and put into plunger facing the composite mould. The antagonist plunger was filled with composite resin. After 24 hours, therefore bond strength was measured using Autograph. Result: Data obtained was analyzed using One-Way ANOVA with 95% confidence level and continued with LSD test on p≤0.05. The result showed that the highest tensile bond strength was on group I, while the lowest on group IV. Group II and IV, III and IV, II and III did not show signigicant difference (p>0.05. Conclusion: Dentin surface drying techniques through gentle rubbing using cotton pellet twice (blot dry technique gave the greatest tensile bond strength.Latar belakang masalah: Tehnik pengeringan permukaan dentin agar resin dapat penetrasi dengan sempurna adalah dengan cara pengusapan secara

  17. Mutagenic activity of various dentine bonding agents.

    Science.gov (United States)

    Schweikl, H; Schmalz, G; Göttke, C

    1996-07-01

    The potential mutagenicity of bonding agents of the new generation was characterised by employing an in vitro gene mutation assay. Eight different components of three dentine bonding systems (Scotchbond Multi Purpose, Prisma Universal Bond 3 and C&B Metabond) were tested in the Ames test using four different Salmonella strains (TA97a, TA98, TA100 and TA102). The materials were eluted in dimethyl sulphoxide and physiological saline; aliquots of the serially diluted eluates were then used in the standard plate incorporation assay. No mutagenic effects were found with Scotchbond Multi Purpose primer and adhesive, Prisma Universal Bond 3 primer, and C&B Metabond base, powder and activator. However, the glutaraldehyde-containing Prisma Universal Bond 3 adhesive elicited a strong mutagenic effect in S. typhimurium strain TA102. Mutation rates caused by dimethyl sulphoxide eluates as well as physiological saline eluates were about five times higher than solvent control values. A mutagenic effect was also observed with C&B Metabond catalyst, especially in strain TA97a when the material was eluted in physiological saline. Both mutagenic responses were not influenced by a metabolically active microsomal fraction from rat liver. We consider the results observed in the Ames test as a first indication of possible mutagenic activity in higher organisms. Therefore, the materials are currently under further investigation using a quantitative in vitro mammalian cell mutation assay.

  18. Induction of Reparative Dentin Formation on Exposed Dental Pulp by Dentin Phosphophoryn/Collagen Composite

    Directory of Open Access Journals (Sweden)

    Toshiyuki Koike

    2014-01-01

    Full Text Available The ultimate goal of vital pulp therapy is to regenerate rapidly dentin possessing an excellent quality using a biocompatible, bioactive agent. Dentin phosphophoryn (DPP, the most abundant noncollagenous polyanionic protein in dentin, cross-linked to atelocollagen fibrils was applied to direct pulp capping in rats. After 1, 2, and 3 weeks, the teeth applied were examined on the induction of reparative dentin formation and the response of pulp tissue, compared to calcium hydroxide-based agent conventionally used. The reparative dentin formation induced by DPP/collagen composite was more rapid than by calcium hydroxide. In the morphometrical analysis, the formation rate of reparative dentin by DPP/collagen composite was approximately the same as that by calcium hydroxide at 3 weeks. Nevertheless, the compactness of reparative dentin formed by DPP/collagen composite was much superior to what resulted from calcium hydroxide. Also, DPP/collagen composite showed high covering ability of exposed pulp. Moreover, DPP/collagen composite led only to slight pulp inflammation at the beginning whereas calcium hydroxide formed necrotic layer adjacent to the material and induced severe inflammation in pulp tissue at 1 week. The present study demonstrates a potential for DPP/collagen composite as a rapid biocompatible inducer for the formation of reparative dentin of excellent quality in rats.

  19. Limitations in Bonding to Dentin and Experimental Strategies to Prevent Bond Degradation

    OpenAIRE

    Liu, Y.; Tjäderhane, L.; Breschi, L; A. Mazzoni; Li, N; J. Mao; Pashley, D.H.; Tay, F.R.

    2011-01-01

    The limited durability of resin-dentin bonds severely compromises the lifetime of tooth-colored restorations. Bond degradation occurs via hydrolysis of suboptimally polymerized hydrophilic resin components and degradation of water-rich, resin-sparse collagen matrices by matrix metalloproteinases (MMPs) and cysteine cathepsins. This review examined data generated over the past three years on five experimental strategies developed by different research groups for extending the longevity of resi...

  20. Secondary organic aerosol formation from photo-oxidation of toluene with NOx and SO2: Chamber simulation with purified air versus urban ambient air as matrix

    Science.gov (United States)

    Deng, Wei; Liu, Tengyu; Zhang, Yanli; Situ, Shuping; Hu, Qihou; He, Quanfu; Zhang, Zhou; Lü, Sujun; Bi, Xinhui; Wang, Xuemei; Boreave, Antoinette; George, Christian; Ding, Xiang; Wang, Xinming

    2017-02-01

    Chamber studies on the formation of secondary aerosols are mostly performed with purified air as matrix, it is of wide concern in what extent they might be different from the situations in ambient air, where a variety of gaseous and particulate components preexist. Here we compared the photo-oxidation of "toluene + NOx + SO2" combinations in a smog chamber in real urban ambient air matrix with that in purified air matrix. The secondary organic aerosols (SOA) mass concentrations and yields from toluene in the ambient air matrix, after subtracted ambient air background primary and secondary organic aerosols, were 9.0-34.0 and 5.6-12.9 times, respectively, greater than those in purified air matrix. Both homogeneous and heterogeneous oxidation of SO2 were enhanced in ambient air matrix experiments with observed 2.0-7.5 times higher SO2 degradation rates and 2.6-6.8 times faster sulfate formation than that in purified air matrix, resulting in higher in-situ particle acidity and consequently promoting acid-catalyzed SOA formation. In the ambient air experiments although averaged OH radical levels were elevated probably due to heterogeneous formation of OH on particle surface and/or ozonolysis of alkenes, non-OH oxidation pathways of SO2 became even more dominating. Under the same organic aerosol mass concentration, the SOA yields of toluene in purified air matrix experiments matched very well with the two-product model curve by Ng et al. (2007), yet the yields in ambient air on average was over two times larger. The results however were much near the best fit curve by Hildebrandt et al. (2009) with the volatility basis set (VBS) approach.

  1. 3.4-Inch Quarter High Definition Flexible Active Matrix Organic Light Emitting Display with Oxide Thin Film Transistor

    Science.gov (United States)

    Hatano, Kaoru; Chida, Akihiro; Okano, Tatsuya; Sugisawa, Nozomu; Inoue, Tatsunori; Seo, Satoshi; Suzuki, Kunihiko; Oikawa, Yoshiaki; Miyake, Hiroyuki; Koyama, Jun; Yamazaki, Shunpei; Eguchi, Shingo; Katayama, Masahiro; Sakakura, Masayuki

    2011-03-01

    In this paper, we report a 3.4-in. flexible active matrix organic light emitting display (AMOLED) display with remarkably high definition (quarter high definition: QHD) in which oxide thin film transistors (TFTs) are used. We have developed a transfer technology in which a TFT array formed on a glass substrate is separated from the substrate by physical force and then attached to a flexible plastic substrate. Unlike a normal process in which a TFT array is directly fabricated on a thin plastic substrate, our transfer technology permits a high integration of high performance TFTs, such as low-temperature polycrystalline silicon TFTs (LTPS TFTs) and oxide TFTs, on a plastic substrate, because a flat, rigid, and thermally-stable glass substrate can be used in the TFT fabrication process in our transfer technology. As a result, this technology realized an oxide TFT array for an AMOLED on a plastic substrate. Furthermore, in order to achieve a high-definition AMOLED, color filters were incorporated in the TFT array and a white organic light-emitting diode (OLED) was combined. One of the features of this device is that the whole body of the device can be bent freely because a source driver and a gate driver can be integrated on the substrate due to the high mobility of an oxide TFT. This feature means “true” flexibility.

  2. Surfactant-Free Solid Dispersions of Hydrophobic Drugs in an Amorphous Sugar Matrix Dried from an Organic Solvent.

    Science.gov (United States)

    Takeda, Koji; Gotoda, Yuto; Hirota, Daichi; Hidaka, Fumihiro; Sato, Tomo; Matsuura, Tsutashi; Imanaka, Hiroyuki; Ishida, Naoyuki; Imamura, Koreyoshi

    2017-03-06

    The technique for homogeneously dispersing hydrophobic drugs in a water-soluble solid matrix (solid dispersion) is a subject that has been extensively investigated in the pharmaceutical industry. Herein, a novel technique for dispersing a solid, without the need to use a surfactant, is reported. A freeze-dried amorphous sugar sample was dissolved in an organic solvent, which contained a soluble model hydrophobic component. The suspension of the sugar and the model hydrophobic component was vacuum foam dried to give a solid powder. Four types of sugars and methanol were used as representative sugars and the organic medium. Four model drugs (indomethacin, ibuprofen, gliclazide, and nifedipine) were employed. Differential scanning calorimetry analyses indicated that the sugar and model drug (100:1) did not undergo segregation during the drying process. The dissolution of the hydrophobic drugs in water from the solid dispersion was then evaluated, and the results indicated that the Cmax and AUC0-60 min of the hydrophobic drug in water were increased when the surfactant-free solid dispersion was used. Palatinose and/or α-maltose were superior to the other tested carbohydrates in increasing Cmax and AUC0-60 min for all tested model drugs, and the model drug with a lower water solubility tended to exhibit a greater extent of over-dissolution.

  3. Organization of the dermal matrix impacts the biomechanical properties of skin.

    Science.gov (United States)

    Langton, A K; Graham, H K; McConnell, J C; Sherratt, M J; Griffiths, C E M; Watson, R E B

    2017-01-28

    Human skin has the crucial roles of maintaining homeostasis and protecting against the external environment. Skin offers protection against mechanical trauma due to the reversible deformation of its structure; these biomechanical properties are amenable to dynamic testing using noninvasive devices. To characterize the biomechanical properties of young, black African/African-Caribbean and white Northern European skin from different anatomical sites, and to relate underlying skin architecture to biomechanical function. Using cutometry and ballistometry, the biomechanical properties of buttock and dorsal forearm skin were determined in black African/African-Caribbean (n = 18) and white Northern European (n = 20) individuals aged 18-30 years. Skin biopsies were obtained from a subset of the volunteers (black African/African-Caribbean, n = 5; white Northern European, n = 6) and processed for histological and immunohistochemical detection of the major elastic fibre components and fibrillar collagens. We have determined that healthy skin from young African and white Northern European individuals has similar biomechanical properties (F3): the skin is resilient (capable of returning to its original position following deformation, R1), exhibits minimal fatigue (R4) and is highly elastic (R2, R5 and R7). At the histological level, skin with these biomechanical properties is imbued with strong interdigitation of the rete ridges at the dermoepidermal junction (DEJ) and candelabra-like arrays of elastic fibres throughout the papillary dermis. Dramatic disruption to this highly organized arrangement of elastic fibres, effacement of the rete ridges and alterations to the alignment of the fibrillar collagens is apparent in the white Northern European forearm and coincides with a marked decline in biomechanical function. Maintenance of skin architecture - both epidermal morphology and elastic fibre arrangement - is essential for optimal skin biomechanical properties. Disruption to

  4. Use of stirred tanks for studying matrix effects caused by inorganic acids, easily ionized elements and organic solvents in inductively coupled plasma atomic emission spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Paredes, Eduardo [Departamento de Quimica Analitica, Nutricion y Bromatologia, University of Alicante, 03080 Alicante (Spain); Maestre, Salvador E. [Departamento de Quimica Analitica, Nutricion y Bromatologia, University of Alicante, 03080 Alicante (Spain); Todoli, Jose L. [Departamento de Quimica Analitica, Nutricion y Bromatologia, University of Alicante, 03080 Alicante (Spain)]. E-mail: jose.todoli@ua.es

    2006-03-15

    A stirred tank was used for the first time to elucidate the mechanism responsible for inductively coupled plasma atomic emission spectroscopy (ICP-AES) matrix effects caused by inorganic, acids and easily ionized elements (EIEs), as well as organic, ethanol and acetic acid, compounds. In order to gradually increase the matrix concentration, a matrix solution was introduced inside a stirred container (tank) initially filled with an aqueous multielement standard. PolyTetraFluoroEthylene (PTFE) tubing was used to deliver the resulting solution to the liquid sample introduction system. Matrix concentration ranged from 0 to 2 mol l{sup -1} in the case of inorganic acids (i.e., nitric, sulfuric, hydrochloric and a mixture of them), from 0 to about 2500 mg l{sup -1} for EIEs (i.e., sodium, calcium and mixtures of both) and from 0% to 15%, w/w for organic compounds. Up to 40-50 different solutions were prepared and measured in a period of time shorter than 6-7 min. This investigation was carried out in terms of emission intensity and tertiary aerosols characteristics. The experimental setup used in the present work allowed to thoroughly study the effect of matrix concentration on analytical signal. Generally speaking, the experiments concerning tertiary aerosol characterization revealed that, in the case of inorganic acids and EIEs, the mechanism responsible for changes in aerosol characteristics was the droplet fission. In contrast, for organic matrices it was found that the interference was caused by a change in both aerosol transport and plasma thermal characteristics. The extent of the interferences caused by organic as well as inorganic compounds was compared for a set of 14 emission lines through a wide range of matrix concentrations. With a stirred tank, it is possible to choose an efficient internal standard for any given matrix composition. The time required to complete this procedure was shorter than 7 min.

  5. Dentin Topographic Features following Chemomechanical Caries Removal in Primary Teeth.

    Science.gov (United States)

    Kotb, R M; Elkateb, M A; Ahmed, A M; Kawana, K Y; El Meligy, O A

    Study the topographic features of dentin after caries removal with a chemomechanical agent (Papacarie) compared with the conventional drilling method. The sample included 7 exfoliated and extracted primary teeth with carious dentin lesions, not reaching the pulp. Each tooth was sectioned longitudinally through the center of the carious lesions into two halves. The teeth were then divided into two groups according to the method of caries removal. Following caries removal, dentin topography and the cut section were examined using the scanning electron microscope. Papacarie produced an irregular, porous, rough and globular dentin appearance. The dentin surfaces were generally free of smear layer, visible bacteria and the dentinal tubules were opened. The dentin cut surfaces showed patent dentinal tubules with open orifices. The drilling method created a smooth and amorphous surface with a continuous smear layer occluding the dentinal tubules. Numerous bacteria were also observed. The cut dentin surfaces showed patent dentinal tubules with their orifices plugged with smear layer. Papacarie produced a rough and porous surface with partial or complete removal of the smear layer and opened dentinal tubules, while the drill produced a smooth surface with uniform smear layer occluding the dentinal tubules.

  6. Evaluation of the Morphological Characteristics of Laser-Irradiated Dentin

    Science.gov (United States)

    Lilaj, Bledar; Franz, Alexander; Degendorfer, Daniela; Moritz, Andreas

    2015-01-01

    Abstract Objective: The aim of this study was to investigate the effect of different energy settings of Er:YAG laser irradiation on dentin surface morphology with respect to the number of opened dentinal tubules. Background data: An ideally prepared dentin surface with opened dentinal tubules is a prerequisite for adhesive fixation. No study, however, has yet compared the numbers of opened dentinal tubules with regard to statistical differences. Methods: Conventional preparations using a bur with or without additional acid etching acted as control groups. Dentin specimens were prepared from human third molars and randomly divided into eight groups according to the energy settings of the laser (1, 1.5, 4, 6, 7.5, and 8 W) and two controls (bur and bur plus acid etching). After surface preparation, dentin surfaces were analyzed with a scanning electron microscope, and the number of opened dentinal tubules in a defined area was counted. Results: The control groups showed smooth surfaces with (bur plus acid etching) and without opened dentinal tubules (bur), whereas all laser-irradiated surfaces showed rough surfaces. Using the energy setting of 4 W resulted in significantly more opened dentinal tubules than the conventional preparation technique using the bur with additional acid etching. In contrast, the energy setting of 8 W showed significantly fewer opened dentinal tubules, and also exhibited signs of thermal damage. Conclusions: The Er:YAG laser with an energy setting of 4 W generates a dentin surface with opened dentinal tubules, a prerequisite for adhesive fixation. PMID:26389986

  7. The peritubular reinforcement effect of porous dentine microstructure.

    Science.gov (United States)

    Wang, Rong; Niu, Lin; Li, Qun; Liu, Qida; Zuo, Hong

    2017-01-01

    In the current study, we evaluate the equivalent stiffness of peritubular reinforcement effect (PRE) of porous dentine optimized by the thickness of peritubular dentine (PTD). Few studies to date have evaluated or quantitated the effect of PRE on composite dentine. The miscrostructure of porous dentine is captured by scanning electron microscope images, and then finite element modeling is used to quantitate the deformation and stiffness of the porous dentine structure. By optimizing the radius of PTD and dentine tubule (DT), the proposed FE model is able to demonstrate the effect of peritubular reinforcement on porous dentine stiffness. It is concluded that the dentinal equivalent stiffness is reduced and degraded with the increase of the radius of DT (i.e., porosity) in the certain ratio value of Ep/Ei and certain radius of PTD, where Ep is the PTD modulus and Ei is the intertubular dentine modulus. So in order to ensure the whole dentinal equivalent stiffness is not loss, the porosity should get some value while the Ep/Ei is certain. Thus, PTD prevents the stress concentration around DTs and reduces the risk of DTs failure. Mechanically, the overall role of PTD appears to enhance the stiffness of the dentine composite structure. These results provide some new and significant insights into the biological evolution of the optimal design for the porous dentine microstructure. These findings on the biological microstructure design of dentine materials are applicable to other engineering structural designs aimed at increasing the overall structural strength.

  8. Limitations in bonding to dentin and experimental strategies to prevent bond degradation.

    Science.gov (United States)

    Liu, Y; Tjäderhane, L; Breschi, L; Mazzoni, A; Li, N; Mao, J; Pashley, D H; Tay, F R

    2011-08-01

    The limited durability of resin-dentin bonds severely compromises the lifetime of tooth-colored restorations. Bond degradation occurs via hydrolysis of suboptimally polymerized hydrophilic resin components and degradation of water-rich, resin-sparse collagen matrices by matrix metalloproteinases (MMPs) and cysteine cathepsins. This review examined data generated over the past three years on five experimental strategies developed by different research groups for extending the longevity of resin-dentin bonds. They include: (1) increasing the degree of conversion and esterase resistance of hydrophilic adhesives; (2) the use of broad-spectrum inhibitors of collagenolytic enzymes, including novel inhibitor functional groups grafted to methacrylate resins monomers to produce anti-MMP adhesives; (3) the use of cross-linking agents for silencing the activities of MMP and cathepsins that irreversibly alter the 3-D structures of their catalytic/allosteric domains; (4) ethanol wet-bonding with hydrophobic resins to completely replace water from the extrafibrillar and intrafibrillar collagen compartments and immobilize the collagenolytic enzymes; and (5) biomimetic remineralization of the water-filled collagen matrix using analogs of matrix proteins to progressively replace water with intrafibrillar and extrafibrillar apatites to exclude exogenous collagenolytic enzymes and fossilize endogenous collagenolytic enzymes. A combination of several of these strategies should result in overcoming the critical barriers to progress currently encountered in dentin bonding.

  9. Preparation of organic/inorganic composite membranes using two types of polymer matrix via a sol-gel process

    Energy Technology Data Exchange (ETDEWEB)

    Park, Seung-Hee [School of Chemical Engineering, Hanyang University, 17 Haengdang-dong, Seongdong-gu, Seoul 133-791 (Korea); Polymer Electrolyte Fuel Cell Research Center, Hydrogen and Fuel Cell Department, Korea Institute of Energy Research (KIER), 71-2 Jang-dong, Yuseong-gu, Daejeon 305-343 (Korea); Park, Jin-Soo; Yim, Sung-Dae; Park, Seok-Hee; Kim, Chang-Soo [Polymer Electrolyte Fuel Cell Research Center, Hydrogen and Fuel Cell Department, Korea Institute of Energy Research (KIER), 71-2 Jang-dong, Yuseong-gu, Daejeon 305-343 (Korea); Lee, Young-Moo [School of Chemical Engineering, Hanyang University, 17 Haengdang-dong, Seongdong-gu, Seoul 133-791 (Korea)

    2008-07-01

    Organic/inorganic composite membranes were prepared using two different polymers. BPO{sub 4} particles were introduced into polymers via an in situ sol-gel process. Pre-/post-sulfonated polymers were used to prepare composite membranes as matrix. Pre-sulfonated poly(aryl ether ketone) (SPAEK-6F) copolymer was synthesized via nucleophilic aromatic substitution. Degree of sulfonation was adjusted by the percentage of sulfonated monomer. Post-sulfonated poly(ether ether ketone) (SPEEK) was prepared using concentrated sulfuric acid as sulfonation agent. The membranes were characterized in terms of the ion-exchange capacity (IEC), proton conductivity, water uptake, AFM, SEM and their thermal properties. The SPAEK-6F plain membranes showed higher proton conductivity than that of the SPEEK plain membranes at similar water uptake or IEC due to their structural difference. SEM images of the composite membranes showed that the BPO{sub 4} particles were homogenously dispersed in the polymer matrices and BPO{sub 4} particle size was greatly influenced by polymer matrix. The SPAEK-6F/BPO{sub 4} composite membranes had much smaller BPO{sub 4} particle size than the SPEEK/BPO{sub 4} composite membranes due to well dispersion of BPO{sub 4} sol-like particulates in SPAEK-6F polymer solutions forming more hydrophobic/hydrophilic nanophase than SPEEK polymer solutions. The latter containing a few micrometer-scale BPO{sub 4} particles showed higher proton conductivity than the former containing hundreds nanometer-scale BPO{sub 4} particles at similar water uptake due to the increase in freezable water and effect of particle size. (author)

  10. Preparation of organic/inorganic composite membranes using two types of polymer matrix via a sol-gel process

    Science.gov (United States)

    Park, Seung-Hee; Park, Jin-Soo; Yim, Sung-Dae; Park, Seok-Hee; Lee, Young-Moo; Kim, Chang-Soo

    Organic/inorganic composite membranes were prepared using two different polymers. BPO 4 particles were introduced into polymers via an in situ sol-gel process. Pre-/post-sulfonated polymers were used to prepare composite membranes as matrix. Pre-sulfonated poly(aryl ether ketone) (SPAEK-6F) copolymer was synthesized via nucleophilic aromatic substitution. Degree of sulfonation was adjusted by the percentage of sulfonated monomer. Post-sulfonated poly(ether ether ketone) (SPEEK) was prepared using concentrated sulfuric acid as sulfonation agent. The membranes were characterized in terms of the ion-exchange capacity (IEC), proton conductivity, water uptake, AFM, SEM and their thermal properties. The SPAEK-6F plain membranes showed higher proton conductivity than that of the SPEEK plain membranes at similar water uptake or IEC due to their structural difference. SEM images of the composite membranes showed that the BPO 4 particles were homogenously dispersed in the polymer matrices and BPO 4 particle size was greatly influenced by polymer matrix. The SPAEK-6F/BPO 4 composite membranes had much smaller BPO 4 particle size than the SPEEK/BPO 4 composite membranes due to well dispersion of BPO 4 sol-like particulates in SPAEK-6F polymer solutions forming more hydrophobic/hydrophilic nanophase than SPEEK polymer solutions. The latter containing a few micrometer-scale BPO 4 particles showed higher proton conductivity than the former containing hundreds nanometer-scale BPO 4 particles at similar water uptake due to the increase in freezable water and effect of particle size.

  11. Cell wall matrix polysaccharide distribution and cortical microtubule organization: two factors controlling mesophyll cell morphogenesis in land plants.

    Science.gov (United States)

    Sotiriou, P; Giannoutsou, E; Panteris, E; Apostolakos, P; Galatis, B

    2016-03-01

    This work investigates the involvement of local differentiation of cell wall matrix polysaccharides and the role of microtubules in the morphogenesis of mesophyll cells (MCs) of three types (lobed, branched and palisade) in the dicotyledon Vigna sinensis and the fern Asplenium nidus. Homogalacturonan (HGA) epitopes recognized by the 2F4, JIM5 and JIM7 antibodies and callose were immunolocalized in hand-made leaf sections. Callose was also stained with aniline blue. We studied microtubule organization by tubulin immunofluorescence and transmission electron microscopy. In both plants, the matrix cell wall polysaccharide distribution underwent definite changes during MC differentiation. Callose constantly defined the sites of MC contacts. The 2F4 HGA epitope in V. sinensis first appeared in MC contacts but gradually moved towards the cell wall regions facing the intercellular spaces, while in A. nidus it was initially localized at the cell walls delimiting the intercellular spaces, but finally shifted to MC contacts. In V. sinensis, the JIM5 and JIM7 HGA epitopes initially marked the cell walls delimiting the intercellular spaces and gradually shifted in MC contacts, while in A. nidus they constantly enriched MC contacts. In all MC types examined, the cortical microtubules played a crucial role in their morphogenesis. In particular, in palisade MCs, cortical microtubule helices, by controlling cellulose microfibril orientation, forced these MCs to acquire a truncated cone-like shape. Unexpectedly in V. sinensis, the differentiation of colchicine-affected MCs deviated completely, since they developed a cell wall ingrowth labyrinth, becoming transfer-like cells. The results of this work and previous studies on Zea mays (Giannoutsou et al., Annals of Botany 2013; 112: : 1067-1081) revealed highly controlled local cell wall matrix differentiation in MCs of species belonging to different plant groups. This, in coordination with microtubule-dependent cellulose microfibril

  12. Nanoleakage patterns of four dentin bonding systems.

    Science.gov (United States)

    Li, H; Burrow, M F; Tyas, M J

    2000-01-01

    The purpose of this study was to evaluate the nanoleakage patterns of four dentin bonding systems. The dentin bonding systems used in this study were: Single Bond, One Coat Bond, Prime & Bond NT/Non Rinse Conditioner (NRC), and PermaQuik. Flat occlusal dentin surfaces from extracted human molars were finished with wet 600-grit silicon carbide paper, and bonded with one of the dentin bonding systems. After 24 h storage at 37 degrees C in water, margins were finished with polishing discs and the surrounding tooth surfaces coated with nail varnish. The samples were immersed in a 50% (w/v) solution of silver nitrate for 24 h, and exposed to photodeveloping solution for 8 h. The samples were cut longitudinally, polished, and mounted on stubs, carbon coated and observed in a Field Emission-SEM using backscattered electron mode. Different nanoleakage patterns were observed with the different adhesive systems. However, accumulations of silver particles were often noted at the base of the hybrid layer for all materials. Single Bond and One Coat Bond demonstrated uptake of silver particles both within the hybrid layer and the adhesive resin. Prime & Bond NT/NRC showed silver staining throughout almost the entire thickness of the hybrid layer. The leakage pattern of PermaQuik revealed loose silver deposition within the hybrid layer. The composition of each adhesive system may play a role in forming the different leakage patterns. The current dentin bonding systems used in this study do not achieve perfect sealing at the restoration/dentin interface, which may influence the durability of the bond to dentin.

  13. Source apportionment using positive matrix factorization on daily measurements of inorganic and organic speciated PM 2.5

    Science.gov (United States)

    Dutton, Steven J.; Vedal, Sverre; Piedrahita, Ricardo; Milford, Jana B.; Miller, Shelly L.; Hannigan, Michael P.

    2010-07-01

    Particulate matter less than 2.5 microns in diameter (PM 2.5) has been linked with a wide range of adverse health effects. Determination of the sources of PM 2.5 most responsible for these health effects could lead to improved understanding of the mechanisms of such effects and more targeted regulation. This has provided the impetus for the Denver Aerosol Sources and Health (DASH) study, a multi-year source apportionment and health effects study relying on detailed inorganic and organic PM 2.5 speciation measurements. In this study, PM 2.5 source apportionment is performed by coupling positive matrix factorization (PMF) with daily speciated PM 2.5 measurements including inorganic ions, elemental carbon (EC) and organic carbon (OC), and organic molecular markers. A qualitative comparison is made between two models, PMF2 and ME2, commonly used for solving the PMF problem. Many previous studies have incorporated chemical mass balance (CMB) for organic molecular marker source apportionment on limited data sets, but the DASH data set is large enough to use multivariate factor analysis techniques such as PMF. Sensitivity of the PMF2 and ME2 models to the selection of speciated PM 2.5 components and model input parameters was investigated in depth. A combination of diagnostics was used to select an optimum, 7-factor model using one complete year of daily data with pointwise measurement uncertainties. The factors included 1) a wintertime/methoxyphenol factor, 2) an EC/sterane factor, 3) a nitrate/polycyclic aromatic hydrocarbon (PAH) factor, 4) a summertime/selective aliphatic factor, 5) an n-alkane factor, 6) a middle-oxygenated PAH/alkanoic acid factor and 7) an inorganic ion factor. These seven factors were qualitatively linked with known PM 2.5 emission sources with varying degrees of confidence. Mass apportionment using the 7-factor model revealed the contribution of each factor to the mass of OC, EC, nitrate and sulfate. On an annual basis, the majority of OC and EC

  14. Source Apportionment Using Positive Matrix Factorization on Daily Measurements of Inorganic and Organic Speciated PM(2.5).

    Science.gov (United States)

    Dutton, Steven J; Vedal, Sverre; Piedrahita, Ricardo; Milford, Jana B; Miller, Shelly L; Hannigan, Michael P

    2010-07-01

    Particulate matter less than 2.5 microns in diameter (PM(2.5)) has been linked with a wide range of adverse health effects. Determination of the sources of PM(2.5) most responsible for these health effects could lead to improved understanding of the mechanisms of such effects and more targeted regulation. This has provided the impetus for the Denver Aerosol Sources and Health (DASH) study, a multi-year source apportionment and health effects study relying on detailed inorganic and organic PM(2.5) speciation measurements.In this study, PM(2.5) source apportionment is performed by coupling positive matrix factorization (PMF) with daily speciated PM(2.5) measurements including inorganic ions, elemental carbon (EC) and organic carbon (OC), and organic molecular markers. A qualitative comparison is made between two models, PMF2 and ME2, commonly used for solving the PMF problem. Many previous studies have incorporated chemical mass balance (CMB) for organic molecular marker source apportionment on limited data sets, but the DASH data set is large enough to use multivariate factor analysis techniques such as PMF.Sensitivity of the PMF2 and ME2 models to the selection of speciated PM(2.5) components and model input parameters was investigated in depth. A combination of diagnostics was used to select an optimum, 7-factor model using one complete year of daily data with pointwise measurement uncertainties. The factors included 1) a wintertime/methoxyphenol factor, 2) an EC/sterane factor, 3) a nitrate/polycyclic aromatic hydrocarbon (PAH) factor, 4) a summertime/selective aliphatic factor, 5) an n-alkane factor, 6) a middle oxygenated PAH/alkanoic acid factor and 7) an inorganic ion factor. These seven factors were qualitatively linked with known PM(2.5) emission sources with varying degrees of confidence. Mass apportionment using the 7-factor model revealed the contribution of each factor to the mass of OC, EC, nitrate and sulfate. On an annual basis, the majority of OC

  15. Biomineralization Mechanisms: A new paradigm for crystal nucleation in organic matricies

    Science.gov (United States)

    Veis, Arthur; Dorvee, Jason R.

    2013-01-01

    There is substantial practical interest in the mechanism by which the carbonated apatite of bone mineral can be initiated specifically in a matrix. The current literature is replete with studies aimed at mimicking the properties of vertebrate bone, teeth and other hard tissues by creating organic matrices that can be mineralized in vitro, and either functionally substitute for bone on a permanent basis, or serve as a temporary structure that can be replaced by normal remodeling processes. A key element in this is mineralization of an implant with the matrix and mineral disposed in the proper orientations and relationships. This review examines the pathway to crystallization from a supersaturated calcium phosphate solution in vitro, focusing on the basic mechanistic questions concerning mineral nucleation and growth. Since bone and dentin mineral forms within collagenous matricies we consider how the in vitro crystallization mechanisms might or might not be applicable to understanding the in vivo processes of biomineralization in bone and dentin. We propose that the pathway to crystallization from the calcium phosphate supersaturated tissue fluids involves the formation of a dense liquid phase of first-layer bound-water hydrated calcium and phosphate ions in which the crystallization is nucleated. SIBLING proteins and their in vitro analogs such as polyaspartic acids, have similar dense liquid first-layer bound water surfaces which interact with the dense liquid calcium phosphate nucleation clusters and modulate the rate of crystallization within the bone and dentin collagen fibril matrix. PMID:23241924

  16. Osmolarity affects matrix synthesis in the nucleus pulposus associated with the involvement of MAPK pathways: A study of ex vivo disc organ culture system.

    Science.gov (United States)

    Li, Pei; Gan, Yibo; Xu, Yuan; Li, Songtao; Song, Lei; Li, Sukai; Li, Huijuan; Zhou, Qiang

    2016-06-01

    Matrix homeostasis within the nucleus pulposus (NP) is important for disc function. Unfortunately, the effects of osmolarity on NP matrix synthesis in a disc organ culture system and the underlying mechanisms are largely unknown. The present study was to investigate the effects of different osmolarity modes (constant and cyclic) and osmolarity levels (hypo-, iso-, and hyper-) on NP matrix synthesis using a disc organ culture system and determine whether ERK1/2 or p38MAPK pathway has a role in this process. Porcine discs were cultured for 7 days in various osmotic media, including constant hypo-, iso-, hyper-osmolarity (330, 430, and 550 mOsm/kg, respectively) and cyclic-osmolarity (430 mOsm/kg for 8 h, followed by 550 mOsm/kg for 16 h). The role of ERK1/2 and p38MAPK pathways were determined by their inhibitors U0126 and SB202190 respectively. The expression of SOX9 and downstream aggrecan and collagen II, biochemical content, and histology were used to assess NP matrix synthesis. The findings revealed that NP matrix synthesis was promoted in iso- and cyclic-osmolarity cultures compared to hypo- or hyper-osmolarity culture although the level of matrix synthesis in cyclic-osmolarity culture did not reach that in iso-osmolarity culture. Further analysis suggested that inhibition of the ERK1/2 or p38MAPK pathway in iso- and cyclic-osmolarity cultures reduced NP matrix production. Therefore, we concluded that the effects of osmolarity on NP matrix synthesis depend on osmolarity level (hypo-, iso-, or hyper-) and osmolarity mode (constant or cyclic), and the ERK1/2 and p38MAPK pathways may participate in this process. © 2015 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 34:1092-1100, 2016.

  17. Phosphate oxygen isotope analysis on microsamples of bioapatite: removal of organic contamination and minimization of sample size.

    Science.gov (United States)

    Wiedemann-Bidlack, Felicitas B; Colman, Albert S; Fogel, Marilyn L

    2008-06-01

    Modern and fossil teeth record seasonal information on climate, diet, and migration through stable isotope compositions in enamel and dentine. Climatic signals such as seasonal variation in meteoric water isotopic composition can be recovered through a microscale histology-based sampling and isotopic analysis of enamel phosphate oxygen. The phosphate moiety in bioapatite is particularly resistant to post mortem diagenesis. In order to determine the phosphate oxygen isotope composition of enamel, phosphate must be chemically purified from other oxygen sources in the enamel lattice and matrix, mainly hydroxyl and carbonate ions, and trace quantities of organics. We present a wet chemical technique for purifying phosphate from microsampled enamel and dentine. This technique uses a sodium hypochlorite oxidation step to remove interferences from residual organic constituents of the enamel and/or dentine scaffold, isolates phosphate as relatively large and easily manipulated Ag(3)PO(4) crystals by using a strongly buffered, moderate-temperature microprecipitation, and preserves the oxygen isotope composition of the initial tooth phosphate. The reproducibility of phosphate oxygen isotope compositions thus determined (measured as delta(18)O, V-SMOW scale) is typically 0.2-0.3 per thousand (1 s.d.) on samples as small as 300 microg of enamel or dentine, a considerable improvement over available techniques for analyses of bioapatite phosphate oxygen.

  18. Omega-3 and Omega-6 Fatty Acids Act as Inhibitors of the Matrix Metalloproteinase-2 and Matrix Metalloproteinase-9 Activity.

    Science.gov (United States)

    Nicolai, Eleonora; Sinibaldi, Federica; Sannino, Gianpaolo; Laganà, Giuseppina; Basoli, Francesco; Licoccia, Silvia; Cozza, Paola; Santucci, Roberto; Piro, Maria Cristina

    2017-08-01

    Polyunsaturated fatty acids have been reported to play a protective role in a wide range of diseases characterized by an increased metalloproteinases (MMPs) activity. The recent finding that omega-3 and omega-6 fatty acids exert an anti-inflammatory effect in periodontal diseases has stimulated the present study, designed to determine whether such properties derive from a direct inhibitory action of these compounds on the activity of MMPs. To this issue, we investigated the effect exerted by omega-3 and omega-6 fatty acids on the activity of MMP-2 and MMP-9, two enzymes that actively participate to the destruction of the organic matrix of dentin following demineralization operated by bacteria acids. Data obtained (both in vitro and on ex-vivo teeth) reveal that omega-3 and omega-6 fatty acids inhibit the proteolytic activity of MMP-2 and MMP-9, two enzymes present in dentin. This observation is of interest since it assigns to these compounds a key role as MMPs inhibitors, and stimulates further study to better define their therapeutic potentialities in carious decay.

  19. [Influence of different dentin depths on microtensile bond strength of two dentin adhesive systems].

    Science.gov (United States)

    Zheng, Tie-li; Huang, Cui; Zheng, Zhi-xing

    2009-10-01

    To determine the microtensile bond strength of two adhesives systems to either superficial or deep dentin. The crowns extracted human premolars were transversally sectioned next to the occlusal DEJ to expose flat dentin surfaces. The surfaces were bonded with: (1)two-step, total-etch adhesive Prime&Bond NT (PB),(2)wo-step, self-etching adhesive FL-Bond (FB), according to manufacturers' directions. Composite build-ups were constructed incrementally. After storage for 24 hours in water at 37 degrees, the teeth were longitudinally sectioned in the "x" and "y" directions to obtain bonded sticks with a cross-sectional area of 0.81mm(2) with a slow-speed diamond saw. The remaining dentin thickness (RDT) was measured to assess the superficial dentin group (RDT> or =3mm) and the deep dentin group (RDT0.05). No cohesive failure was observed in either superficial or deep dentin. Most of the failure was adhesive failure. From this study, it can be concluded that different dentin depths can not influence the microtensile bond strengths of Prime&Bond NT and FL-Bond adhesive systems.

  20. Scanning electron microscopy and dentinal permeability analysis of smear layer.

    Science.gov (United States)

    Prati, C; Mongiorgi, R; Pashley, D H; Riva di Sanseverino, L

    1991-05-01

    The aim of the present study was to evaluate the surface morphology and the permeability of dentine after different acid treatments: polyacrylic acid, maleic acid, phosphoric acid and saline solution as control. Dentine permeability was expressed as hydraulic conductance. All the acid treatments removed the smear layer and increased the dentine permeability.

  1. Comparison of autologous ilium spongy bone combined with human decalcified dentinal matrix in alveolar process cleft bone grafting%脱钙人牙基质材料联合髂骨与单纯髂骨移植修复牙槽突裂的对比性研究

    Institute of Scientific and Technical Information of China (English)

    霍永力; 张雷; 王建华; 李华; 邢建峰; 孙志干; 陆立本; 刘英华

    2009-01-01

    group (13.3%), 1 case(2 sides) in class 4 group(6.7%). The overall survival rate of ABGR was 93.3%, and the clinical success rate was 80%. Conclusion: Ilium spongy bone combined with DDM is good for alveolar process cleft bone grafting. It is better to use decalcified dentinal matrix of human than autologous ilium spongy bone.

  2. Immunohistochemical localization of the NH(2)-terminal and COOH-terminal fragments of dentin sialoprotein in mouse teeth.

    Science.gov (United States)

    Yuan, Guohua; Yang, Guobin; Song, Guangtai; Chen, Zhi; Chen, Shuo

    2012-08-01

    Dentin sialoprotein (DSP) is a major non-collagenous protein in dentin. Mutation studies in human, along with gene knockout and transgenic experiments in mice, have confirmed the critical role of DSP for dentin formation. Our previous study reported that DSP is processed into fragments in mouse odontoblast-like cells. In order to gain insights into the function of DSP fragments, we further evaluated the expression pattern of DSP in the mouse odontoblast-like cells using immunohistochemistry and western blot assay with antibodies against the NH(2)-terminal and COOH-terminal regions of DSP. Then, the distribution profiles of the DSP NH(2)-terminal and COOH-terminal fragments and osteopontin (OPN) were investigated in mouse teeth at different ages by immunohistochemistry. In the odontoblast-like cells, multiple low molecular weight DSP fragments were detected, suggesting that part of the DSP protein was processed in the odontoblast-like cells. In mouse first lower molars, immunoreactions for anti-DSP-NH(2) antibody were intense in the predentin matrix but weak in mineralized dentin; in contrast, for anti-DSP-COOH antibody, strong immunoreactions were found in mineralized dentin, in particular dentinal tubules but weak in predentin. Therefore, DSP NH(2)-terminal and COOH-terminal fragments from odontoblasts were secreted to different parts of teeth, suggesting that they may play distinct roles in dentinogenesis. Meanwhile, both DSP antibodies showed weak staining in reactionary dentin (RD), whereas osteopontin (OPN) was clearly positive in RD. Therefore, DSP may be less crucial for RD formation than OPN.

  3. Metal-organic framework mixed-matrix disks: Versatile supports for automated solid-phase extraction prior to chromatographic separation.

    Science.gov (United States)

    Ghani, Milad; Font Picó, Maria Francesca; Salehinia, Shima; Palomino Cabello, Carlos; Maya, Fernando; Berlier, Gloria; Saraji, Mohammad; Cerdà, Víctor; Turnes Palomino, Gemma

    2017-03-10

    We present for the first time the application of metal-organic framework (MOF) mixed-matrix disks (MMD) for the automated flow-through solid-phase extraction (SPE) of environmental pollutants. Zirconium terephthalate UiO-66 and UiO-66-NH2 MOFs with different size (90, 200 and 300nm) have been incorporated into mechanically stable polyvinylidene difluoride (PVDF) disks. The performance of the MOF-MMDs for automated SPE of seven substituted phenols prior to HPLC analysis has been evaluated using the sequential injection analysis technique. MOF-MMDs enabled the simultaneous extraction of phenols with the concomitant size exclusion of molecules of larger size. The best extraction performance was obtained using a MOF-MMD containing 90nm UiO-66-NH2 crystals. Using the selected MOF-MMD, detection limits ranging from 0.1 to 0.2μgL(-1) were obtained. Relative standard deviations ranged from 3.9 to 5.3% intra-day, and 4.7-5.7% inter-day. Membrane batch-to-batch reproducibility was from 5.2 to 6.4%. Three different groundwater samples were analyzed with the proposed method using MOF-MMDs, obtaining recoveries ranging from 90 to 98% for all tested analytes.

  4. Characterization of phenol and alkyl phenols in organic matrixes with monoethylene glycol extraction and multidimensional gas chromatography/mass spectrometry.

    Science.gov (United States)

    Luong, J; Gras, R; Cortes, H J; Shellie, R A

    2013-07-02

    The use of monoethylene glycol as an extraction medium for removing phenol and alkyl phenols in organic matrixes such as hydrocarbons is introduced and combined with a practical analytical multidimensional gas chromatography approach. The analytical approach has been successfully developed for the characterization of phenol, cresols, xylenols, and alkyl phenols like 4-ethylphenol and 2,3,5-trimethylphenol. The technique employs a single-step extraction of the analytes with monoethylene glycol and sonication, followed by multidimensional gas chromatography with mass spectrometry in selected ion monitoring mode for the detection and quantitation. Extraction efficiency of phenol approached 100% while cresols, xylenols, and 4-ethylphenol were 97% or higher and 2,3,5-trimethylphenol was better than 91% under the analytical conditions used. With the technique described, a complete analysis can be conducted in less than 16 min. Reproducibility of area counts at two levels, namely, 5 ppm(w) and 50 ppm(w) over a period of 2 days were found to be less than 4% (n = 20). The analytes of interest was found to be linear over a range from 100 ppb(w) to 250 ppm(w) with correlation coefficient of at least 0.999 and detection limit of 50 ppb(w) . Spike recoveries from 500 ppb(w) to 250 ppm(w) for all analytes range from 96 to 102%.

  5. Effect of transparent film desiccant on the lifetime of top-emitting active matrix organic light emitting diodes

    Science.gov (United States)

    Lee, Byoung Duk; Cho, Yoon-Hyung; Kim, Won-Jong; Oh, Min Ho; Lee, Jong Hyuk; Zang, Dong Sik

    2007-03-01

    The effects of a transparent film desiccant on the lifetime of top-emitting active matrix organic light emitting diodes (AMOLEDs) were investigated. The transparent film desiccants were prepared by mixing solutions dispersed with calcium oxide powders and ultraviolet-curable resins. As the solid content in the solutions increased from 15to30wt%, the average particle size increased from 107to240nm, whereas the transmittance of the films decreased from 98% to 80% in the visible range. The devices encapsulated with the transparent film desiccants which contained 20wt% CaO exhibited no dark spots and 97% of the initial luminance, even after being stored for over 500h at 70°C and 90% relative humidity. Also, the operational lifetime of these devices was 1850h, ten times longer than that of a device without desiccant. These results confirmed that the transparent film desiccants, which absorbed the moisture that penetrated into the devices, could be applied to the encapsulation of top-emitting AMOLEDs.

  6. Volatile organic compounds (VOCs) in urban air: How chemistry affects the interpretation of positive matrix factorization (PMF) analysis

    Science.gov (United States)

    Yuan, Bin; Shao, Min; de Gouw, Joost; Parrish, David D.; Lu, Sihua; Wang, Ming; Zeng, Limin; Zhang, Qian; Song, Yu; Zhang, Jianbo; Hu, Min

    2012-12-01

    Volatile organic compounds (VOCs) were measured online at an urban site in Beijing in August-September 2010. Diurnal variations of various VOC species indicate that VOCs concentrations were influenced by photochemical removal with OH radicals for reactive species and secondary formation for oxygenated VOCs (OVOCs). A photochemical age-based parameterization method was applied to characterize VOCs chemistry. A large part of the variability in concentrations of both hydrocarbons and OVOCs was explained by this method. The determined emission ratios of hydrocarbons to acetylene agreed within a factor of two between 2005 and 2010 measurements. However, large differences were found for emission ratios of some alkanes and C8 aromatics between Beijing and northeastern United States secondary formation from anthropogenic VOCs generally contributed higher percentages to concentrations of reactive aldehydes than those of inert ketones and alcohols. Anthropogenic primary emissions accounted for the majority of ketones and alcohols concentrations. Positive matrix factorization (PMF) was also used to identify emission sources from this VOCs data set. The four resolved factors were three anthropogenic factors and a biogenic factor. However, the anthropogenic factors are attributed here to a common source at different stages of photochemical processing rather than three independent sources. Anthropogenic and biogenic sources of VOCs concentrations were not separated completely in PMF. This study indicates that photochemistry of VOCs in the atmosphere complicates the information about separated sources that can be extracted from PMF and the influence of photochemical processing must be carefully considered in the interpretation of source apportionment studies based upon PMF.

  7. A High-Performance Current-Mode Source Driver IC for Mobile Active Matrix Organic Light Emitting Diode Displays

    Science.gov (United States)

    Jeong, Il-Hun; Kwon, Oh-Kyong

    2008-03-01

    In this paper, we describe two types of 8-bit current-mode driver ICs with a small area and good performance for applications high accuracy current-mode digital-to-analog converters (DACs), and improved channel-to-channel uniformity for active matrix organic light-emitting diode (AMOLED) displays. One uses the proposed current steering DAC (type A), which is an improved architecture of a binary-weighted DAC, and the other uses a DAC that is a combination of a thermometer-decoded of the DAC and a binary-weighted type. The measured results show that the peak integral nonlinearity (INL) is within ±0.5 the least significant bit (LSB), the peak differential nonlinearity (DNL) is within ±0.5 LSB, and the nonuniformity of output current among channels and chips is within ±0.5 LSB. The size of the driver IC is 15,820 ×1,500 µm2 and the total power consumption of the current-mode driver IC is less than 9 mW when the display has full-white pattern with a luminance of 150 cd/m2. The chip area and power consumption with the proposed current DAC are reduced by 26 and 10%, respectively, compared with those of conventional driver ICs with a fully binary-weighted DAC.

  8. Investigation of Pattern-Induced Brightness Non-uniformity in Active-Matrix Organic Light-Emitting Diode Displays

    Science.gov (United States)

    Kim, Kyoung-Bo; Park, Hye-Hyang; Kwon, Ohseob; Kim, Moojin; Lee, Ki-Yong; Park, Yongwoo; Choi, JongHyun; Yu, CheolHo; Kim, Hye-Dong; Kim, Sung Chul; Chung, Ho-Kyoon

    2008-01-01

    We recently improved the brightness non-uniformity in active-matrix organic light-emitting diode (AMOLED) regarding non-uniform laser energy distribution by applying a “shot mixing” technique in sequential lateral solidification (SLS) method. Although the new SLS technique was employed, another brightness non-uniformity that appeared as oblique lines on AMOLED panels became a crucial issue. In this work, we attempted to investigate the origins of the non-uniformity. Our systematic analysis on the oblique lines revealed that the line type non-uniformity was attributed to both the SLS process and the thin-film transistor (TFT) fabrication processes. In particular, we found that such oblique patterns might be related to moiré patterns that appear when primary grain boundaries aligned in a repetitive pattern is placed over other repetitive TFT patterns such as metal lines. We adopted a method to diminish the moiré pattern type non-uniformity by applying top emission TFT structure.

  9. Structural Characterization of Sputtered Silicon Thin Films after Rapid Thermal Annealing for Active-Matrix Organic Light Emitting Diode

    Science.gov (United States)

    Mugiraneza, Jean de Dieu; Miyahira, Tomoyuki; Sakamoto, Akinori; Chen, Yi; Okada, Tatsuya; Noguchi, Takashi; Itoh, Taketsugu

    2010-12-01

    The microcrystalline phase obtained by adopting a two-step rapid thermal annealing (RTA) process for rf-sputtered silicon films deposited on thermally durable glass was characterized. The optical properties, surface morphology, and internal stress of the annealed Si films are investigated. As the thermally durable glass substrate allows heating of the deposited films at high temperatures, micro-polycrystalline silicon (micro-poly-Si) films of uniform grain size with a smooth surface and a low internal stress could be obtained after annealing at 750 °C. The thermal stress in the Si films was 100 times lower than that found in the films deposited on conventional glass. Uniform grains with an average grain size of 30 nm were observed by transmission electron microscopy (TEM) in the films annealed at 800 °C. These micro-poly-Si films have potential application for fabrication of uniform and reliable thin film transistors (TFTs) for large scale active-matrix organic light emitting diode (AMOLED) displays.

  10. Image quality affected by diffraction of aperture structure arrangement in transparent active-matrix organic light-emitting diode displays.

    Science.gov (United States)

    Tsai, Yu-Hsiang; Huang, Mao-Hsiu; Jeng, Wei-de; Huang, Ting-Wei; Lo, Kuo-Lung; Ou-Yang, Mang

    2015-10-01

    Transparent display is one of the main technologies in next-generation displays, especially for augmented reality applications. An aperture structure is attached on each display pixel to partition them into transparent and black regions. However, diffraction blurs caused by the aperture structure typically degrade the transparent image when the light from a background object passes through finite aperture window. In this paper, the diffraction effect of an active-matrix organic light-emitting diode display (AMOLED) is studied. Several aperture structures have been proposed and implemented. Based on theoretical analysis and simulation, the appropriate aperture structure will effectively reduce the blur. The analysis data are also consistent with the experimental results. Compared with the various transparent aperture structure on AMOLED, diffraction width (zero energy position of diffraction pattern) of the optimize aperture structure can be reduced 63% and 31% in the x and y directions in CASE 3. Associated with a lenticular lens on the aperture structure, the improvement could reach to 77% and 54% of diffraction width in the x and y directions. Modulation transfer function and practical images are provided to evaluate the improvement of image blurs.

  11. Plasma treatment of dentin surfaces for improving self-etching adhesive/dentin interface bonding.

    Science.gov (United States)

    Dong, Xiaoqing; Li, Hao; Chen, Meng; Wang, Yong; Yu, Qingsong

    2015-06-01

    This study is to evaluate plasma treatment effects on dentin surfaces for improving self-etching adhesive and dentin interface bonding. Extracted unerupted human third molars were used after crown removal to expose dentin. One half of each dentin surface was treated with atmospheric non-thermal argon plasmas, while another half was untreated and used as the same tooth control. Self-etching adhesive and universal resin composite was applied to the dentin surfaces as directed. After restoration, the adhesive-dentin bonding strength was evaluated by micro-tensile bonding strength (μTBS) test. Bonding strength data was analyzed using histograms and Welch's t-test based on unequal variances. μTBS test results showed that, with plasma treatment, the average μTBS value increased to 69.7±11.5 MPa as compared with the 57.1±17.5 MPa obtained from the untreated controls. After 2 months immersion of the restored teeth in 37 °C phosphate buffered saline (PBS), the adhesive-dentin bonding strengths of the plasma-treated specimens slightly decreased from 69.7±11.5 MPa to 63.9±14.4 MPa, while the strengths of the untreated specimens reduced from 57.1±17.5 MPa to 48.9±14.6 MPa. Water contact angle measurement and scanning electron microscopy (SEM) examination verified that plasma treatment followed by water rewetting could partially open dentin tubules, which could enhance adhesive penetration to form thicker hybrid layer and longer resin tags and consequently improve the adhesive/dentin interface quality.

  12. Plasma treatment of dentin surfaces for improving self-etching adhesive/dentin interface bonding

    Science.gov (United States)

    Dong, Xiaoqing; Li, Hao; Chen, Meng; Wang, Yong; Yu, Qingsong

    2015-01-01

    This study is to evaluate plasma treatment effects on dentin surfaces for improving self-etching adhesive and dentin interface bonding. Extracted unerupted human third molars were used after crown removal to expose dentin. One half of each dentin surface was treated with atmospheric non-thermal argon plasmas, while another half was untreated and used as the same tooth control. Self-etching adhesive and universal resin composite was applied to the dentin surfaces as directed. After restoration, the adhesive-dentin bonding strength was evaluated by micro-tensile bonding strength (μTBS) test. Bonding strength data was analyzed using histograms and Welch’s t-test based on unequal variances. μTBS test results showed that, with plasma treatment, the average μTBS value increased to 69.7±11.5 MPa as compared with the 57.1±17.5 MPa obtained from the untreated controls. After 2 months immersion of the restored teeth in 37 °C phosphate buffered saline (PBS), the adhesive-dentin bonding strengths of the plasma-treated specimens slightly decreased from 69.7±11.5 MPa to 63.9±14.4 MPa, while the strengths of the untreated specimens reduced from 57.1±17.5 MPa to 48.9±14.6 MPa. Water contact angle measurement and scanning electron microscopy (SEM) examination verified that plasma treatment followed by water rewetting could partially open dentin tubules, which could enhance adhesive penetration to form thicker hybrid layer and longer resin tags and consequently improve the adhesive/dentin interface quality. PMID:26273561

  13. Chemical and topographical analyses of dentine surfaces after Carisolv treatment.

    Science.gov (United States)

    Arvidsson, Anna; Liedberg, Bo; Möller, Kenneth; Lyvén, Benny; Sellén, Annika; Wennerberg, Ann

    2002-01-01

    The aim of this study was to characterise the surface chemistry of cavities after chemomechanical caries excavation, and also to measure the surface topography after caries removal with Carisolv or burs, followed by acid etching. Fourier transform (FT)-Raman spectroscopy was used to study the relative amounts of organic material and minerals of sound enamel, dentine, and cavities, after caries excavation. Fourier transform infrared spectroscopy (FTIR) and laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) were used for detection of Carisolv substances (i.e. mainly sodium hypochlorite, amino acids, and the gelling agent carboxymethyl cellulose). In total, 19 carious and 11 sound extracted teeth were used for the chemical analyses. Topographic examination of 30 carious extracted teeth was performed with a contact profilometer. The relative amounts of organic material and minerals did not significantly differ between sound dentine and the cavities after caries removal with burs or Carisolv. The FTIR analyses indicated extremely small amounts of Carisolv substances at the cavity surface, but the LA-ICP-MS analyses did not confirm those findings. Furthermore, the topographical parameters did not significantly differ between etched cavities after caries removal using burs or Carisolv. The chemical and topographical analyses in the present study imply that any differences between the cavities after caries excavation with burs or with Carisolv are insignificant.

  14. Dentin Conditioning with Bioactive Molecule Releasing Nanoparticle System Enhances Adherence, Viability, and Differentiation of Stem Cells from Apical Papilla.

    Science.gov (United States)

    Shrestha, Suja; Torneck, Calvin D; Kishen, Anil

    2016-05-01

    Temporal-controlled bioactive molecule (BM) releasing systems allow the delivery of appropriate concentration of BM to enhance the interaction of stem cells to dentin matrix and subsequent odontogenic differentiation in regenerative endodontics. The goal of this study was to evaluate the effect of dentin conditioning with 2 variants of dexamethasone (Dex) releasing chitosan nanoparticles (CSnp), (1) Dex-CSnpI (slow releasing) and (2) Dex-CSnpII (rapid releasing), on adherence, viability, and differentiation of stem cells from apical papilla (SCAP) on root dentin exposed to endodontic irrigants. Slab-shaped dentin specimens were prepared parallel to the root canal and treated with 5.25% sodium hypochlorite (NaOCl) for 10 minutes and/or 17% EDTA for 2 minutes. Dentin was then conditioned accordingly by (1) no nanoparticle treatment, (2) CSnp, (3) Dex-CSnpI, and (4) Dex-CSnpII. The effect of nanoparticle conditioning on SCAP viability was determined by cell count and a circularity index. SCAP adherence and viability on dentin were assessed by fluorescence and scanning electron microscopy and odontogenic differentiation by immunofluorescence. SCAP on dentin treated with NaOCl alone or NaOCl as the last irrigant showed the least adherence, minimal cytoplasmic extensions, and higher circularity. SCAP adherence and viability on Dex-CSnpI and Dex-CSnpII conditioned dentin were increased and had a well-developed cytoplasmic matrix and significantly lower circularity (P nanoparticles to improve the local environment in regenerative endodontics. Copyright © 2016 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

  15. Molecular and morphological surface analysis: effect of filling pastes and cleaning agents on root dentin

    Science.gov (United States)

    DAINEZI, Vanessa Benetello; IWAMOTO, Alexsandra Shizue; MARTIN, Airton Abrahão; SOARES, Luís Eduardo Silva; HOSOYA, Yumiko; PASCON, Fernanda Miori; PUPPIN-RONTANI, Regina Maria

    2017-01-01

    Abstract The quality of the dentin root is the most important factor for restoration resin sealing and drives the outcome of endodontic treatment. Objective This study evaluated the effect of different filling pastes and cleaning agents on the root dentin of primary teeth using Fourier-transformed Raman spectroscopy (FT-Raman), micro energy-dispersive X-ray fluorescence (µ-EDXRF) and scanning electron microscopic (SEM) analysis. Material and Methods Eighty roots of primary teeth were endodontically prepared and distributed into 4 groups and filled according to the following filling pastes: Control-no filling (CP), Calen®+zinc oxide (CZ), Calcipex II® (CII), Vitapex® (V). After seven days, filling paste groups were distributed to 4 subgroups according to cleaning agents (n=5): Control-no cleaning (C), Ethanol (E), Tergenform® (T), 35% Phosphoric acid (PA). Then, the roots were sectioned and the dentin root sections were internally evaluated by FT-Raman, µ-EDXRF and SEM. Data was submitted to two-way ANOVA and Tukey tests (α=0.05). Results Regarding filling pastes, there was no significant difference in organic content. CP provided the lowest calcium values and, calcium/phosphoric ratio (Ca/P), and the highest phosphoric values. For cleaning agents there was no difference in organic content when compared to the C; however, T showed significantly higher calcium and Ca/P than PA. All groups showed similar results for phosphorus. The dentin smear layer was present after use of the cleaning agents, except PA. Conclusion The filling pastes changed the inorganic content, however they did not change the organic content. Cleaning agents did not alter the inorganic and organic content. PA cleaned and opened dentin tubules. PMID:28198982

  16. Dentine microhardness after different methods for detection and removal of carious dentine tissue

    Science.gov (United States)

    MOLLICA, Fernanda Brandão; TORRES, Carlos Rocha Gomes; GONÇALVES, Sergio Eduardo de Paiva; MANCINI, †Maria Nadir Gasparoto

    2012-01-01

    There are several methods for identifying carious dentinal tissue aiming to avoid removal of healthy dentinal tissue. Objectives The purpose of this study was to test different methods for the detection of carious dentinal tissue regarding the amount of carious tissue removed and the remaining dentin microhardness after caries removal. Material and methods The dentin surfaces of 20 bovine teeth were exposed and half of the surface was protected with nail polish. Cariogenic challenge was performed by immersion in a demineralizing solution for 14 days. After transverse cross-section of the crown, the specimens were divided into four groups (n=10), according to the method used to identify and remove the carious tissue: "Papacárie", Caries-detector dye, DIAGNOdent and Tactile method. After caries removal, the cross-sectional surface was included in acrylic resin and polished. In a microhardness tester, the removed dentin thickness and the Vickers microhardness of the following regions were evaluated: remaining dentin after caries removal and superficial and deep healthy dentin. Results ANOVA and Tukey's test (α=0.05) were performed, except for DIAGNOdent, which did not detect the presence of caries. Results for removed dentin thickness were: "Papacárie" (424.7±105.0; a), Caries-detector dye (370.5±78.3; ab), Tactile method (322.8±51.5; bc). Results for the remaining dentin microhardness were: "Papacárie" (42.2±10.5; bc), Caries-detector dye (44.6±11.8; abc), Tactile method (24.3±9.0; d). Conclusions DIAGNOdent did not detect the presence of carious tissue; Tactile method and "Papacárie" resulted in the least and the most dentinal thickness removal, respectively; Tactile method differed significantly from "Papacárie" and Caries-detector dye in terms of the remaining dentin microhardness, and Tactile method was the one which presented the lowest microhardness values. PMID:23032207

  17. Dentine microhardness after different methods for detection and removal of carious dentine tissue

    Directory of Open Access Journals (Sweden)

    Fernanda Brandão Mollica

    2012-08-01

    Full Text Available There are several methods for identifying carious dentinal tissue aiming to avoid removal of healthy dentinal tissue. OBJECTIVES: The purpose of this study was to test different methods for the detection of carious dentinal tissue regarding the amount of carious tissue removed and the remaining dentin microhardness after caries removal. MATERIAL AND METHODS: The dentin surfaces of 20 bovine teeth were exposed and half of the surface was protected with nail polish. Cariogenic challenge was performed by immersion in a demineralizing solution for 14 days. After transverse cross-section of the crown, the specimens were divided into four groups (n=10, according to the method used to identify and remove the carious tissue: "Papacárie", Caries-detector dye, DIAGNOdent and Tactile method. After caries removal, the cross-sectional surface was included in acrylic resin and polished. In a microhardness tester, the removed dentin thickness and the Vickers microhardness of the following regions were evaluated: remaining dentin after caries removal and superficial and deep healthy dentin. RESULTS: ANOVA and Tukey's test (α=0.05 were performed, except for DIAGNOdent, which did not detect the presence of caries. Results for removed dentin thickness were: "Papacárie" (424.7±105.0; a, Caries-detector dye (370.5±78.3; ab, Tactile method (322.8±51.5; bc. Results for the remaining dentin microhardness were: "Papacárie" (42.2±10.5; bc, Caries-detector dye (44.6±11.8; abc, Tactile method (24.3±9.0; d. CONCLUSIONS: DIAGNOdent did not detect the presence of carious tissue; Tactile method and "Papacárie" resulted in the least and the most dentinal thickness removal, respectively; Tactile method differed significantly from "Papacárie" and Caries-detector dye in terms of the remaining dentin microhardness, and Tactile method was the one which presented the lowest microhardness values.

  18. Clinical management of infected root canal dentin.

    Science.gov (United States)

    Love, R M

    1996-08-01

    Several hundred different species of bacteria are present in the human intraoral environment. Bacterial penetration of root canal dentin occurs when bacteria invade the root canal system. These bacteria may constitute a reservoir from which root canal reinfection may occur during or after endodontic treatment. The learning objective of this article is to review endodontic microbiology, update readers on the role of bacteria in pulp and periapical disease, and discuss the principles of management of infected root canal dentin. Complete debridement, removal of microorganisms and affected dentin, and chemomechanical cleansing of the root canal are suggested as being the cornerstones of successful endodontic therapy, followed by intracanal medication to remove residual bacteria, when required.

  19. Cytotoxicity evaluation of dentin contacting materials with dentin barrier test device using erbium-doped yttrium, aluminum, and garnet laser-treated dentin.

    Science.gov (United States)

    Ülker, H E; Ülker, M; Botsalı, M S; Dündar, A; Acar, H

    2014-09-01

    The effect of dentin contacting materials on three-dimensional cultures of pulp-derived cells was evaluated in a dentin barrier test device using erbium-doped yttrium, aluminum, and garnet (Er:YAG) laser-treated dentin. The test materials (iBond(®), G-Bond™, and Vitrebond™) were applied on laser-treated or untreated dentin discs. After 24 h of exposure with perfusion of the test chamber, cell survival was evaluated by enzyme activity and related to a nontoxic control material. The mean values of control tissues were set to represent 100% viability. Data were analyzed using Kruskal-Wallis and Mann-Whitney U test. Vitrebond was the most toxic material for both laser-treated and untreated dentin. On untreated dentin, G-bond was cytotoxic to the pulp-derived cells (p 0.05). However, G-Bond and iBond were not cytotoxic when they were applied to Er:YAG laser-treated dentin (p > 0.05). Er:YAG laser treatment of dentin may protect the pulp cells from toxic substances of dentin contacting restorative materials; however, this effect is material related. Taking into consideration the limitations of this in vitro study, the Er:YAG laser treatment of dentin before restoration might be an option for decreasing the cytotoxic effects of the dental materials. Further research is required for clinical applications. © The Author(s) 2014.

  20. A mesoporous biomaterial for biomimetic crystallization in dentinal tubules without impairing the bonding of a self-etch resin to dentin

    Directory of Open Access Journals (Sweden)

    Yu-Chih Chiang

    2016-06-01

    Conclusion: CCMS-HP can be used to form a biomimetic barrier for prevention of dentin sensitivity because it neither impedes the bonding of SBU to dentin nor impairs the shear bonding strength between the SBU and dentin.

  1. Dentine in a capsule: Clinical case reports

    Directory of Open Access Journals (Sweden)

    Mallikarjuna Kenchappa

    2015-01-01

    Full Text Available Biodentine TM , a calcium silicate based material has been popular now and can be used as an alternative to mineral trioxide aggregate (MTA due to superior physical and biologic properties. It has been known by several terms as Biodentine, dentin substitute, and RD 94. It has varied clinical applications such as apexification, apexogenesis, pulpotomy, internal resorption, root perforation repair, retrograde filling, pulp capping procedure, and dentin replacement. This article describes the clinical case reports using Biodentine in apexification, apexogenesis, pulpotomy, and root perforation repair.

  2. Human and Bovine Dentin Composition and Its Hybridization Mechanism Assessed by FT-Raman Spectroscopy

    Directory of Open Access Journals (Sweden)

    L. E. S. Soares

    2013-01-01

    Full Text Available FT-Raman spectroscopy was used to study the human and bovine dentin and their interactions with adhesive systems. Ten human (H molars and ten bovine (B teeth were prepared exposing the dentin and then each specimen was divided into two parts. The resulted forty dentin segments were treated either with the total-etch one bottle adhesive (Prime & Bond 2.1, PB or with the single-step self-etching adhesive (Xeno III, X and divided into four groups: HPB (control, HX, BPB, and BX. Each group was analyzed by FT-Raman spectroscopy before and after the adhesive treatment. Six regions of the Raman spectrum were analyzed and the integrated areas of organic and inorganic peaks were calculated. Bovine untreated specimens showed higher peak area of PO4 3−ν2  content than in human specimens. Human untreated specimens had higher peak areas of PO4 3−ν4 and CO3 2−ν1  contents than in bovine specimens. The peak areas of amide III, CH2, and amide I contents were higher in human than in bovine specimens (before treatments. Treated dentin showed no significant statistical differences between the adhesives for both inorganic and organic contents considering the same substrate. However, the differences found between human and bovine specimens after adhesives application show a reduced accuracy of these substrates as a substitute to the human specimens.

  3. A Fourier transform infrared spectroscopy analysis of carious dentin from transparent zone to normal zone.

    Science.gov (United States)

    Liu, Y; Yao, X; Liu, Y W; Wang, Y

    2014-01-01

    It is well known that caries invasion leads to the differentiation of dentin into zones with altered composition, collagen integrity and mineral identity. However, understanding of these changes from the fundamental perspective of molecular structure has been lacking so far. In light of this, the present work aims to utilize Fourier transform infrared spectroscopy (FTIR) to directly extract molecular information regarding collagen's and hydroxyapatite's structural changes as dentin transitions from the transparent zone (TZ) into the normal zone (NZ). Unembedded ultrathin dentin films were sectioned from carious teeth, and an FTIR imaging system was used to obtain spatially resolved FTIR spectra. According to the mineral-to-matrix ratio image generated from large-area low-spectral-resolution scan, the TZ, the NZ and the intermediate subtransparent zone (STZ) were identified. High-spectral-resolution spectra were taken from each zone and subsequently examined with regard to mineral content, carbonate distribution, collagen denaturation and carbonate substitution patterns. The integrity of collagen's triple helical structure was also evaluated based on spectra collected from demineralized dentin films of selected teeth. The results support the argument that STZ is the real sclerotic layer, and they corroborate the established knowledge that collagen in TZ is hardly altered and therefore should be reserved for reparative purposes. Moreover, the close resemblance between the STZ and the NZ in terms of carbonate content, and that between the STZ and the TZ in terms of being A-type carbonate-rich, suggest that the mineral that initially occludes dentin tubules is hydroxyapatite newly generated from odontoblastic activities, which is then transformed into whitlockite in the demineralization/remineralization process as caries progresses.

  4. Critical points of DNA quantification by real-time PCR – effects of DNA extraction method and sample matrix on quantification of genetically modified organisms

    Directory of Open Access Journals (Sweden)

    Žel Jana

    2006-08-01

    Full Text Available Abstract Background Real-time PCR is the technique of choice for nucleic acid quantification. In the field of detection of genetically modified organisms (GMOs quantification of biotech products may be required to fulfil legislative requirements. However, successful quantification depends crucially on the quality of the sample DNA analyzed. Methods for GMO detection are generally validated on certified reference materials that are in the form of powdered grain material, while detection in routine laboratories must be performed on a wide variety of sample matrixes. Due to food processing, the DNA in sample matrixes can be present in low amounts and also degraded. In addition, molecules of plant origin or from other sources that affect PCR amplification of samples will influence the reliability of the quantification. Further, the wide variety of sample matrixes presents a challenge for detection laboratories. The extraction method must ensure high yield and quality of the DNA obtained and must be carefully selected, since even components of DNA extraction solutions can influence PCR reactions. GMO quantification is based on a standard curve, therefore similarity of PCR efficiency for the sample and standard reference material is a prerequisite for exact quantification. Little information on the performance of real-time PCR on samples of different matrixes is available. Results Five commonly used DNA extraction techniques were compared and their suitability for quantitative analysis was assessed. The effect of sample matrix on nucleic acid quantification was assessed by comparing 4 maize and 4 soybean matrixes. In addition 205 maize and soybean samples from routine analysis were analyzed for PCR efficiency to assess variability of PCR performance within each sample matrix. Together with the amount of DNA needed for reliable quantification, PCR efficiency is the crucial parameter determining the reliability of quantitative results, therefore it was

  5. Critical points of DNA quantification by real-time PCR – effects of DNA extraction method and sample matrix on quantification of genetically modified organisms

    Science.gov (United States)

    Cankar, Katarina; Štebih, Dejan; Dreo, Tanja; Žel, Jana; Gruden, Kristina

    2006-01-01

    Background Real-time PCR is the technique of choice for nucleic acid quantification. In the field of detection of genetically modified organisms (GMOs) quantification of biotech products may be required to fulfil legislative requirements. However, successful quantification depends crucially on the quality of the sample DNA analyzed. Methods for GMO detection are generally validated on certified reference materials that are in the form of powdered grain material, while detection in routine laboratories must be performed on a wide variety of sample matrixes. Due to food processing, the DNA in sample matrixes can be present in low amounts and also degraded. In addition, molecules of plant origin or from other sources that affect PCR amplification of samples will influence the reliability of the quantification. Further, the wide variety of sample matrixes presents a challenge for detection laboratories. The extraction method must ensure high yield and quality of the DNA obtained and must be carefully selected, since even components of DNA extraction solutions can influence PCR reactions. GMO quantification is based on a standard curve, therefore similarity of PCR efficiency for the sample and standard reference material is a prerequisite for exact quantification. Little information on the performance of real-time PCR on samples of different matrixes is available. Results Five commonly used DNA extraction techniques were compared and their suitability for quantitative analysis was assessed. The effect of sample matrix on nucleic acid quantification was assessed by comparing 4 maize and 4 soybean matrixes. In addition 205 maize and soybean samples from routine analysis were analyzed for PCR efficiency to assess variability of PCR performance within each sample matrix. Together with the amount of DNA needed for reliable quantification, PCR efficiency is the crucial parameter determining the reliability of quantitative results, therefore it was chosen as the primary

  6. Critical points of DNA quantification by real-time PCR--effects of DNA extraction method and sample matrix on quantification of genetically modified organisms.

    Science.gov (United States)

    Cankar, Katarina; Stebih, Dejan; Dreo, Tanja; Zel, Jana; Gruden, Kristina

    2006-08-14

    Real-time PCR is the technique of choice for nucleic acid quantification. In the field of detection of genetically modified organisms (GMOs) quantification of biotech products may be required to fulfil legislative requirements. However, successful quantification depends crucially on the quality of the sample DNA analyzed. Methods for GMO detection are generally validated on certified reference materials that are in the form of powdered grain material, while detection in routine laboratories must be performed on a wide variety of sample matrixes. Due to food processing, the DNA in sample matrixes can be present in low amounts and also degraded. In addition, molecules of plant origin or from other sources that affect PCR amplification of samples will influence the reliability of the quantification. Further, the wide variety of sample matrixes presents a challenge for detection laboratories. The extraction method must ensure high yield and quality of the DNA obtained and must be carefully selected, since even components of DNA extraction solutions can influence PCR reactions. GMO quantification is based on a standard curve, therefore similarity of PCR efficiency for the sample and standard reference material is a prerequisite for exact quantification. Little information on the performance of real-time PCR on samples of different matrixes is available. Five commonly used DNA extraction techniques were compared and their suitability for quantitative analysis was assessed. The effect of sample matrix on nucleic acid quantification was assessed by comparing 4 maize and 4 soybean matrixes. In addition 205 maize and soybean samples from routine analysis were analyzed for PCR efficiency to assess variability of PCR performance within each sample matrix. Together with the amount of DNA needed for reliable quantification, PCR efficiency is the crucial parameter determining the reliability of quantitative results, therefore it was chosen as the primary criterion by which to

  7. Relation between incremental lines and tensile strength of coronal dentin.

    Science.gov (United States)

    Inoue, Toshiko; Saito, Makoto; Yamamoto, Masato; Nishimura, Fumio; Miyazaki, Takashi

    2012-01-01

    In one aspect, this study examined the tensile strength of coronal dentin, as a function of the location of incremental lines, in two types of teeth: human molar versus bovine incisor. In another aspect, tensile strength in coronal dentin was examined with tensile loading in two different orientations to the incremental lines: parallel versus perpendicular. There were four experimental groups in this study: HPa, human molar dentin with tensile orientation parallel to the incremental lines; HPe, human molar dentin with tensile orientation perpendicular to the incremental lines; BPa, bovine incisor dentin with tensile orientation parallel to the incremental lines; BPe, bovine incisor dentin with tensile orientation perpendicular to the incremental lines. Tensile strengths of the parallel group (HPa and BPa) were significantly higher (pincremental lines, was thus confirmed in coronal dentin. However, there were no differences in anisotropy effect between the two tooth types.

  8. Discrimination Factors and Incorporation Rates for Organic Matrix in Shark Teeth Based on a Captive Feeding Study.

    Science.gov (United States)

    Zeichner, S S; Colman, A S; Koch, P L; Polo-Silva, C; Galván-Magaña, F; Kim, S L

    Sharks migrate annually over large distances and occupy a wide variety of habitats, complicating analysis of lifestyle and diet. A biogeochemical technique often used to reconstruct shark diet and environment preferences is stable isotope analysis, which is minimally invasive and integrates through time and space. There are previous studies that focus on isotopic analysis of shark soft tissues, but there are limited applications to shark teeth. However, shark teeth offer an advantage of multiple ecological snapshots and minimum invasiveness during removal because of their distinct conveyor belt tooth replacement system. In this study, we analyze δ(13)C and δ(15)N values of the organic matrix in leopard shark teeth (Triakis semifasciata) from a captive experiment and report discrimination factors as well as incorporation rates. We found differences in tooth discrimination factors for individuals fed different prey sources (mean ± SD; Δ(13)Csquid = 4.7‰ ± 0.5‰, Δ(13)Ctilapia = 3.1‰ ± 1.0‰, Δ(15)Nsquid = 2.0‰ ± 0.7‰, Δ(15)Ntilapia = 2.8‰ ± 0.6‰). In addition, these values differed from previously published discrimination factors for plasma, red blood cells, and muscle of the same leopard sharks. Incorporation rates of shark teeth were similar for carbon and nitrogen (mean ± SE; λC = 0.021 ± 0.009, λN = 0.024 ± 0.007) and comparable to those of plasma. We emphasize the difference in biological parameters on the basis of tissue substrate and diet items to interpret stable isotope data and apply our results to stable isotope values from blue shark (Prionace glauca) teeth to illustrate the importance of biological parameters to interpret the complex ecology of a migratory shark.

  9. Comparative Study of MIL-96(Al) as Continuous Metal-Organic Frameworks Layer and Mixed-Matrix Membrane.

    Science.gov (United States)

    Knebel, Alexander; Friebe, Sebastian; Bigall, Nadja Carola; Benzaqui, Marvin; Serre, Christian; Caro, Jürgen

    2016-03-23

    MIL-96(Al) layers were prepared as supported metal-organic frameworks membrane via reactive seeding using the α-alumina support as the Al source for the formation of the MIL-96(Al) seeds. Depending on the solvent mixture employed during seed formation, two different crystal morphologies, with different orientation of the transport-active channels, have been formed. This crystal orientation and habit is predefined by the seed crystals and is kept in the subsequent growth of the seeds to continuous layers. In the gas separation of an equimolar H2/CO2 mixture, the hydrogen permeability of the two supported MIL-96(Al) layers was found to be highly dependent on the crystal morphology and the accompanied channel orientation in the layer. In addition to the neat supported MIL-96(Al) membrane layers, mixed-matrix membranes (MMMs, 10 wt % filler loading) as a composite of MIL-96(Al) particles as filler in a continuous Matrimid polymer phase have been prepared. Five particle sizes of MIL-96(Al) between 3.2 μm and 55 nm were synthesized. In the preparation of the MIL-96(Al)/Matrimid MMM (10 wt % filler loading), the following preparation problems have been identified: The bigger micrometer-sized MIL-96(Al) crystals show a trend toward sedimentation during casting of the MMM, whereas for nanoparticles aggregation and recrystallization to micrometer-sized MIL-96(Al) crystals has been observed. Because of these preparation problems for MMM, the neat supported MIL-96(Al) layers show a relatively high H2/CO2 selectivity (≈9) and a hydrogen permeance approximately 2 magnitudes higher than that of the best MMM.

  10. Effect of Nanofiller Addition to an Experimental Dentin Adhesive on Microtensile Bond Strength to Human Dentin

    Directory of Open Access Journals (Sweden)

    SH. Kasraei

    2009-06-01

    Full Text Available Objective: The purpose of the study was to evaluate the influence of adding nanofiller particles to a dentin bonding agent on resin-dentin bond strength.Materials and Methods: Fifty-four human intact premolar teeth were divided in to 6 groups of nine. The teeth were ground on occlusal surfaces and polished with 320 and then 600 grit silicon carbide papers. An experimental bonding system based on acetone/alcoholsolvent was provided with filler contents of 0.0, 0.5, 1.0, 2.5, 5.0, and 10.0 weight percent fumed silica nanofiller. After dentin surface etching, rinsing and blot drying, the experimentalbonding agents were applied to dentin surface. A composite resin was, then,bonded to the dentin on the bonding agent. The specimens were thermocycled for 500 cycles and sectioned in stick form. After two week of storage in distilled water, resin-dentin microtensile bond strength of the specimens was measured. Data were analyzed by one way ANOVA and DunnettT3 tests.Results: Bond strength to dentin was significantly affected by the filler level. Minimum and maximum resin-microtensile bond strength was in the experimental bonding agent with no filler (5.88 MPa and with filler level of 1.0 weight percent (15.15 MPa, respectively,and decreased with the increase of filler content down to 8.95 MPa for the filler level of 10.0 weight percent.Conclusion: Filler content seems to be one of the important factors influencing the bond strength of dental adhesives. Maximum dentin bond strength was obtained with 1% silanized nanofiller silica added to experimental adhesive system.

  11. Dentin conditioning codetermines cell fate in regenerative endodontics.

    Science.gov (United States)

    Galler, Kerstin M; D'Souza, Rena N; Federlin, Marianne; Cavender, Adriana C; Hartgerink, Jeffrey D; Hecker, Stephanie; Schmalz, Gottfried

    2011-11-01

    Recent successes in dental pulp engineering indicate that regenerative treatment strategies in endodontics are feasible. Clinically, revascularization procedures render completion of root formation in immature teeth. The generation of a pulp-like tissue after seeding of dental pulp stem cells into dentin discs or cylinders and transplantation in vivo is possible. In this experimental setup, which mimics the situation in the root canal, the pretreatment of dentin might influence cellular behavior at the cell-dentin interface. Thus, the objective of this study was to investigate whether dentin conditioning can determine cell fate. Dental pulp stem cells (DPSCs) were seeded into a growth factor-laden peptide hydrogel, transferred into dentin cylinders, and transplanted subcutaneously into immunocompromised mice. Before cell seeding, dentin cylinders were either pretreated with sodium hypochloride (NaOCl) or conditioned with EDTA. The constructs were explanted after 6 weeks and subjected to histological and immunohistochemical analysis. In dentin treated with NaOCl, resorption lacunae were found at the cell-dentin interface created by multinucleated cells with clastic activity. After conditioning with EDTA, DPSCs adjacent to the dentin formed an intimate association with the surface, differentiated into odontoblasts-like cells that expressed dentin sialoprotein, and extended cellular processes into the dentinal tubules. A vascularized soft connective tissue similar to dental pulp was observed inside the dentin cylinder. Dentin conditioning considerably influences DPSC fate when seeded in close proximity to dentin. This information might be critical for optimized strategic planning for future regenerative endodontic treatment. Copyright © 2011 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

  12. Effects of endodontic tri-antibiotic paste on bond strengths of dentin adhesives to coronal dentin

    Directory of Open Access Journals (Sweden)

    Parvin Mirzakoucheki

    2015-05-01

    Full Text Available Objectives The aim of this study was to evaluate the effects of tri-antibiotic paste (TAP on microtensile bond strengths (MTBS of dental adhesives to dentin. Materials and Methods Sixty extracted molars had their occlusal surfaces flattened to expose dentin. They were divided into two groups, i.e., control group with no dentin treatment and experimental group with dentin treatment with TAP. After 10 days, specimens were bonded using self-etch (Filtek P90 adhesive or etch-and-rinse (Adper Single Bond Plus adhesives and restored with composite resin. Teeth were sectioned into beams, and the specimens were subjected to MTBS test. Data were analyzed using two-way ANOVA and post hoc Tukey tests. Results There was a statistically significant interaction between dentin treatment and adhesive on MTBS to coronal dentin (p = 0.003. Despite a trend towards worse MTBS being noticed in the experimental groups, TAP application showed no significant effect on MTBS (p = 0.064. Conclusions The etch-and-rinse adhesive Adper Single Bond Plus presented higher mean bond strengths than the self-etch adhesive Filtek P90, irrespective of the group. The superior bond performance for Adper Single Bond when compared to Filtek P90 adhesive was confirmed by a fewer number of adhesive failures. The influence of TAP in bond strength is insignificant.

  13. Biomimetic Scaffold with Aligned Microporosity Designed for Dentin Regeneration

    Science.gov (United States)

    Panseri, Silvia; Montesi, Monica; Dozio, Samuele Maria; Savini, Elisa; Tampieri, Anna; Sandri, Monica

    2016-01-01

    Tooth loss is a common result of a variety of oral diseases due to physiological causes, trauma, genetic disorders, and aging and can lead to physical and mental suffering that markedly lowers the individual’s quality of life. Tooth is a complex organ that is composed of mineralized tissues and soft connective tissues. Dentin is the most voluminous tissue of the tooth and its formation (dentinogenesis) is a highly regulated process displaying several similarities with osteogenesis. In this study, gelatin, thermally denatured collagen, was used as a promising low-cost material to develop scaffolds for hard tissue engineering. We synthetized dentin-like scaffolds using gelatin biomineralized with magnesium-doped hydroxyapatite and blended it with alginate. With a controlled freeze-drying process and alginate cross-linking, it is possible to obtain scaffolds with microscopic aligned channels suitable for tissue engineering. 3D cell culture with mesenchymal stem cells showed the promising properties of the new scaffolds for tooth regeneration. In detail, the chemical–physical features of the scaffolds, mimicking those of natural tissue, facilitate the cell adhesion, and the porosity is suitable for long-term cell colonization and fine cell–material interactions. PMID:27376060

  14. 论矩阵式组织结构在图书馆工作中的应用%Discussion on Applying Matrix Organization Structure in Library

    Institute of Scientific and Technical Information of China (English)

    温敬朋

    2011-01-01

    The construction of matrix organization structure in library is helping to eliminate the shortcomings which was caused by the line organization structure, such as the slowly reacting, lacking of collaboration and communicating. It is also helping for library to fulfill the multi tasks. Construction of matrix organization is an important developing trend of developed country library, it is significant of library to carry out its work. Libraries of our country should try to build matrix organization as soon as possible.%构建矩阵式组织结构有助于消除图书馆传统直线式组织结构所造成的反应慢、缺乏协作和沟通交流等弊端,有助于现代图书馆快速应对多样化任务。建立矩阵式组织结构是发达国家图书馆发展的一种重要趋势,对于图书馆工作开展具有重要意义。我国图书馆应尽快尝试建立矩阵式组织结构。

  15. Cyclodextrin-supported organic matrix for application of MALDI-MS for forensics. Soft-ionization to obtain protonated molecules of low molecular weight compounds

    Energy Technology Data Exchange (ETDEWEB)

    Yonezawa, Tetsu, E-mail: tetsu@eng.hokudai.ac.jp [Division of Materials Science and Engineering, Faculty of Engineering, Hokkaido University, Kita 13, Nishi 8, Kita-ku, Sapporo, Hokkaido 060-8628 (Japan); Department of Chemistry, School of Science, The University of Tokyo, Hongo, Bunkyo-ku, Tokyo 113-0033 (Japan); Asano, Takashi [Division of Materials Science and Engineering, Faculty of Engineering, Hokkaido University, Kita 13, Nishi 8, Kita-ku, Sapporo, Hokkaido 060-8628 (Japan); Criminal Investigation Laboratory, Metropolitan Police Department, 2-1-1 Kasumigaseki, Chiyoda-ku, Tokyo 100-8929 (Japan); Fujino, Tatsuya [Department of Chemistry, Graduate School of Science and Engineering, Tokyo Metropolitan University, 1-1 Minami-Osawa, Hachioji, Tokyo 192-0397 (Japan); Nishihara, Hiroshi [Department of Chemistry, School of Science, The University of Tokyo, Hongo, Bunkyo-ku, Tokyo 113-0033 (Japan)

    2013-06-20

    Highlights: ► MALDI-MS applications for drug identification in forensic science is investigated. ► Cyclodextrin-supported organic matrices strongly suppress the obstacle peaks of organic matrix compounds. ► Cyclodextrin-supported organic matrices also suppress the alkali adducted molecule peaks. ► Sugar units of cyclodextrins work for this specific features. - Abstract: A mass measurement technique for detecting low-molecular-weight drugs with a cyclodextrin-supported organic matrix was investigated. By using cyclodextrin-supported 2,4,6-trihydroxyacetophenone (THAP), the matrix-related peaks of drugs were suppressed. The peaks of protonated molecules of the sample and THAP were mainly observed, and small fragments were detected in a few cases. Despite the Na{sup +} and K{sup +} peaks were observed in the spectrum, Na{sup +} or K{sup +} adduct sample molecules were undetected, owing to the sugar units of cyclodextrin. The advantages of MALDI-MS with cyclodextrin-supported matrices as an analytical tool for forensic samples are discussed. The suppression of alkali adducted molecules and desorption process are also discussed.

  16. Effect of enamel organic matrix on the potential of Galla chinensis to promote the remineralization of initial enamel carious lesions in vitro

    Energy Technology Data Exchange (ETDEWEB)

    Zhang Linglin; Zou Ling; Li Jiyao; Hao Yuqing; Xiao Liying; Zhou Xuedong; Li Wei, E-mail: leewei2000@sina.co, E-mail: zhll_sc@yahoo.c [State Key Laboratory of Oral Diseases, West China College of Stomatology, West China Hospital of Stomatology, Sichuan University, Chengdu (China)

    2009-06-15

    Galla chinensis, a natural traditional Chinese medicine with main composition of tannic acid and gallic acid, is formed when the Chinese sumac aphid Baker (Melaphis chinensis bell) parasitizes the levels of Rhus chinensis Mill. Galla chinensis has shown the potential to enhance the remineralization of initial enamel carious lesion, but the mechanism is still unknown. This study was to investigate whether the enamel organic matrix plays a significant role in the potential of Galla chinensis to promote the remineralization of initial enamel caries. Bovine sound enamel blocks and non-organic enamel blocks were demineralized and exposed to a 12 day pH cycling. During the pH cycling, 30 specimens with the enamel organic matrix were randomly divided into three groups, and treated with 1 g L{sup -1} NaF (group A), 4 g L{sup -1} Galla chinensis extract (group B1) or double deionized water (group C1). Twenty specimens without the enamel organic matrix were randomly divided into two groups, and treated with 4 g L{sup -1} Galla chinensis extract (group B2) or double deionized water (group C2). The integrated mineral loss and lesion depth of all the specimens were analysed by transverse microradiography. The integrated mineral loss and lesion depth of group B1 were less than those of groups B2, C1 and C2, and there were no statistical differences among groups B2, C1 and C2. In conclusion, Galla chinensis can enhance the remineralization of initial enamel carious lesion, and the enamel organic matrix plays a significant role in this potential of Galla chinensis.

  17. Penetration of amalgam constituents into dentine

    NARCIS (Netherlands)

    Scholtanus, Johannes D.; Ozcan, Mutlu; Huysmans, Marie-Charlotte D. N. J. M.

    2009-01-01

    Objectives: Amalgam restorations are replaced by adhesively placed composite resin restorations at an increasing rate. After the removal of amalgam dentine often shows marked dark discoloration that is attributed to the penetration of corrosion products from overlying amalgams. it is questioned whet

  18. Penetration of amalgam constituents into dentine.

    NARCIS (Netherlands)

    Scholtanus, J.D.; Ozcan, M.; Huysmans, M.C.D.N.J.M.

    2009-01-01

    OBJECTIVES: Amalgam restorations are replaced by adhesively placed composite resin restorations at an increasing rate. After the removal of amalgam dentine often shows marked dark discoloration that is attributed to the penetration of corrosion products from overlying amalgams. It is questioned whet

  19. Hydrofluoric acid on dentin should be avoided.

    NARCIS (Netherlands)

    Loomans, B.A.C.; Mine, A.; Roeters, F.J.M.; Opdam, N.J.M.; Munck, J. De; Huysmans, M.C.D.N.J.M.; Meerbeek, B. Van

    2010-01-01

    Hydrofluoric acid can be used for intra-oral repair of restorations. Contamination of tooth substrate with hydrofluoric acid cannot always be avoided. OBJECTIVES: To investigate the bonding effectiveness to hydrofluoric acid contaminated dentin by, micro-tensile bond strength testing, SEM and TEM. M

  20. The Possible Role of Dentin as a Piezoelectric Signal Generator by Determining the Elec-tromechanical Coupling Factor of Dentin

    Directory of Open Access Journals (Sweden)

    Atabak Shahidi

    2011-08-01

    Full Text Available Introduction: This article aimed at calculation of the electromechanical coupling factor of dentin which is an indicator of the effectiveness with which a piezoelectric material converts electrical en-ergy into mechanical energy, or vice versa. The hypothesis: The electro-mechanical coupling factor of dentin was determined in mode 11 and 33 by calculating the ratio of the produced electrical energy to the stored elastic energy in dentin under applied pressure. This study showed that the electromechanical coupling factor of dentin was affected by the direction of the applied force and the moisture content of dentin. Also dentin was a weak electromechanical energy converter which might be categorized as a piezoelectric pressure sensor.Evaluation of the hypothesis: Determination of the electrome-chanical coupling factor of dentin and its other piezoelectric constants is essential to investigate the biologic role of piezoelectricity in tooth.

  1. Characterization of genipin-modified dentin collagen.

    Science.gov (United States)

    Nagaoka, Hiroko; Nagaoka, Hideaki; Walter, Ricardo; Boushell, Lee W; Miguez, Patricia A; Burton, Andrew; Ritter, André V; Yamauchi, Mitsuo

    2014-01-01

    Application of biomodification techniques to dentin can improve its biochemical and biomechanical properties. Several collagen cross-linking agents have been reported to strengthen the mechanical properties of dentin. However, the characteristics of collagen that has undergone agent-induced biomodification are not well understood. The objective of this study was to analyze the effects of a natural cross-linking agent, genipin (GE), on dentin discoloration, collagen stability, and changes in amino acid composition and lysyl oxidase mediated natural collagen cross-links. Dentin collagen obtained from extracted bovine teeth was treated with three different concentrations of GE (0.01%, 0.1%, and 0.5%) for several treatment times (0-24 h). Changes in biochemical properties of NaB(3)H4-reduced collagen were characterized by amino acid and cross-link analyses. The treatment of dentin collagen with GE resulted in a concentration- and time-dependent pigmentation and stability against bacterial collagenase. The lysyl oxidase-mediated trivalent mature cross-link, pyridinoline, showed no difference among all groups while the major divalent immature cross-link, dehydro-dihydroxylysinonorleucine/its ketoamine in collagen treated with 0.5% GE for 24 h, significantly decreased compared to control (P < 0.05). The newly formed GE-induced cross-links most likely involve lysine and hydroxylysine residues of collagen in a concentration-dependent manner. Some of these cross-links appear to be reducible and stabilized with NaB(3)H4.

  2. Characterization of Genipin-Modified Dentin Collagen

    Directory of Open Access Journals (Sweden)

    Hiroko Nagaoka

    2014-01-01

    Full Text Available Application of biomodification techniques to dentin can improve its biochemical and biomechanical properties. Several collagen cross-linking agents have been reported to strengthen the mechanical properties of dentin. However, the characteristics of collagen that has undergone agent-induced biomodification are not well understood. The objective of this study was to analyze the effects of a natural cross-linking agent, genipin (GE, on dentin discoloration, collagen stability, and changes in amino acid composition and lysyl oxidase mediated natural collagen cross-links. Dentin collagen obtained from extracted bovine teeth was treated with three different concentrations of GE (0.01%, 0.1%, and 0.5% for several treatment times (0–24 h. Changes in biochemical properties of NaB3H4-reduced collagen were characterized by amino acid and cross-link analyses. The treatment of dentin collagen with GE resulted in a concentration- and time-dependent pigmentation and stability against bacterial collagenase. The lysyl oxidase-mediated trivalent mature cross-link, pyridinoline, showed no difference among all groups while the major divalent immature cross-link, dehydro-dihydroxylysinonorleucine/its ketoamine in collagen treated with 0.5% GE for 24 h, significantly decreased compared to control (P< 0.05. The newly formed GE-induced cross-links most likely involve lysine and hydroxylysine residues of collagen in a concentration-dependent manner. Some of these cross-links appear to be reducible and stabilized with NaB3H4.

  3. Tissue dissolution and modifications in dentin composition by different sodium hypochlorite concentrations

    Science.gov (United States)

    TARTARI, Talita; BACHMANN, Luciano; MALIZA, Amanda Garcia Alves; ANDRADE, Flaviana Bombarda; DUARTE, Marco Antonio Hungaro; BRAMANTE, Clovis Monteiro

    2016-01-01

    ABSTRACT Sodium hypochlorite (NaOCl) remains the most used irrigation solution during root canal preparation because of characteristics such as wide-spectrum antimicrobial activity and organic tissue dissolution capacity. However, these solutions can alter dentin composition and there is no consensus on the optimal concentration of NaOCl to be used. Objectives To determine the organic matter dissolution and changes in dentin chemical composition promoted by different concentrations of NaOCl over time. Material and Methods: Fragments of bovine muscle tissue were weighed before and after 5, 10, and 15 min of immersion in the groups (n=10): G1- 0.9% saline solution; G2- 1% NaOCl; G3- 2.5% NaOCl; and G4- 5% NaOCl. Bovine dentin fragments were subjected to the same irrigants and absorption spectra were collected by Attenuated Total Reflectance of Fourier Transform Infrared Spectroscopy (ATR-FTIR) before and after 0,5, 1, 2, 3, 5, 8, and 10 min of immersion in the solutions. The ratios of the amide III/phosphate and carbonate/phosphate absorption bands were determined. The tissue dissolution and carbonate/phosphate ratios were submitted to the two-way analysis of variance (ANOVA) with Tukey’s multiple-comparison test (α0.05). Intergroup differences were not observed in this ratio (p>0.05). Conclusions The increase in the exposure time and in the concentration of NaOCl solution lead to an increase in the tissue dissolution and dentin collagen deproteination. Furthermore, some carbonate ions are removed from the dentin inorganic phase by the NaOCl. PMID:27383711

  4. Mechanism of action of tin-containing fluoride solutions as anti-erosive agents in dentine - an in vitro tin-uptake, tissue loss, and scanning electron microscopy study.

    Science.gov (United States)

    Ganss, Carolina; Hardt, Martin; Lussi, Adrian; Cocks, Ann-Kristin; Klimek, Joachim; Schlueter, Nadine

    2010-08-01

    Solutions containing tin and fluoride exhibit remarkable anti-erosive properties with tin ions as a major agent. To elucidate its mechanism of action in dentine, the tin uptake on and in the tissue was investigated and related to histological findings and substance loss. Samples were treated twice daily, each treatment lasting for 2 min, with fluoride solutions [pH 4.5; 1,500 parts per million (p.p.m.) F] containing 2,100, 1,400, or 400 p.p.m. Sn as SnCl(2). In experiments 1 and 2, samples were eroded with citric acid (pH 2.3) six times each day, each treatment lasting for 5 min; in experiment 2, the demineralized organic matrix was continuously digested by collagenase; in experiment 3, no erosive challenges were performed. Sample surfaces and cross-sections were investigated using energy dispersive X-ray spectroscopy, scanning electron microscopy, and profilometry. Surface retention of tin was found in almost all treatment groups and was highest in experiment 2. On cross-sections, tin was retained within the organic matrix; in mineralized areas, tin was found mainly within a depth of 10 mum. Test solutions inhibited substance loss significantly; in experiment 2, the effect was dose-dependent. Erosion inhibition seemed to depend mainly on the incorporation of tin in the mineralized dentine when the organic portion was preserved, but on surface precipitation when the organic portion was continuously digested. (c) 2010 The Authors. Journal compilation (c) 2010 Eur J Oral Sci.

  5. Minimal invasive treatment using 6.02 micrometer DFG laser for carious dentin

    Science.gov (United States)

    Awazu, Kunio; Ishii, Katsunori; Saiki, Masayuki; Yasuo, Kenzo; Yamamoto, Kazuyo; Yoshikawa, Kazushi

    2010-11-01

    Conventional laser light sources for the treatment of a hard tissue in dental are good for removal of caries. However these lasers cannot achieve to give a selective treatment effect for caries without a side effect for normal tissue. The objective of this study is to develop the minimal invasive treatment technique of carious dentin by selective absorption effect using the laser with a wavelength of 6.02 μm which corresponds to an absorption peak of organic matters called amide 1 band. Mid-infrared nanosecond pulsed laser by difference-frequency generation was used for the experiment of selective treatment. A tunable wavelength range, pulse width and repetition rate is from 5.5 to 10 μm, 5 ns and 10 Hz, respectively. The laser with a wavelength of 6.02 μm and predetermined energy parameters was irradiated to a carious dentin model. After laser irradiation, the surface and cross-sectional surface of samples were observed. Average power density about 15 W/cm2 realized to excavate a demineralized region selectively. In the same energy condition, serious side effect was not observed on the surface of normal dentin. A wavelength of 6.02 μm realizes a selective excavation of carious dentin. Using 6.02 μm is a novel and promising technique toward to next-generation dental treatment procedure for realizing minimal intervention.

  6. Matrix Organization and Merit Factor Evaluation as a Method to Address the Challenge of Finding a Polymer Material for Roll Coated Polymer Solar Cells

    DEFF Research Database (Denmark)

    Bundgaard, Eva; Livi, Francesco; Hagemann, Ole

    2015-01-01

    The results presented demonstrate how the screening of 104 light-absorbing low band gap polymers for suitability in roll coated polymer solar cells can be accomplished through rational synthesis according to a matrix where 8 donor and 13 acceptor units are organized in rows and columns. Synthesis...... of all the polymers corresponding to all combinations of donor and acceptor units is followed by characterization of all the materials with respect to molecular weight, electrochemical energy levels, band gaps, photochemical stability, carrier mobility, and photovoltaic parameters. The photovoltaic...... silver comb back electrode structure. The matrix organization enables fast identification of active layer materials according to a weighted merit factor that includes more than simply the power conversion efficiency and is used as a method to identify the lead candidates. Based on several characteristics...

  7. Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) coupled to XAD fractionation: Method to algal organic matter characterization.

    Science.gov (United States)

    Nicolau, Rudy; Leloup, Maud; Lachassagne, Delphine; Pinault, Emilie; Feuillade-Cathalifaud, Geneviève

    2015-05-01

    This work is focused on the development of an analytical procedure for the improvement of the Organic Matter structure characterization, particularly the algal matter. Two fractions of algal organic matter from laboratory cultures of algae (Euglena gracilis) and cyanobacteria (Microcystis aeruginosa) were extracted with XAD resins. The fractions were studied using laser desorption ionization (LDI) and Matrix-Assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF). A comparison with the natural organic matter characteristics from commercial humic acids and fulvic acids extracted from Suwannee River was performed. Results show that algal and natural organic matters have unique quasi-polymeric structures. Significant repeating patterns were identified. Different fractions extracted from organic matter with common origin had common structures. Thus, 44, 114 and 169Da peaks separation for fractions from E. gracilis organic matter and 28, 58 and 100Da for M. aeruginosa ones were clearly observed. Using the developed protocol, a structural scheme and organic matter composition were obtained. The range 600-2000Da contained more architectural composition differences than the range 100-600Da, suggesting that organic matter is composed of an assembly of common small molecules. Associated to specific monomers, particular patterns were common to all samples but assembly and resulting structure were unique for each organic matter. Thus, XAD fractionation coupled to mass spectroscopy allowed determining a specific fingerprint for each organic matter.

  8. Zoledronate and Ion-releasing Resins Impair Dentin Collagen Degradation

    Science.gov (United States)

    Tezvergil-Mutluay, A.; Seseogullari-Dirihan, R.; Feitosa, V.P.; Tay, F.R.; Watson, T.F.; Pashley, D.H.; Sauro, S.

    2014-01-01

    This study analyzed the amounts of solubilized telopeptides cross-linked carboxyterminal telopeptide of type I collagen (ICTP) and C-terminal crosslinked telopeptide of type I collagen (CTX) derived from matrix-metalloproteinases (MMPs) and cysteine cathepsins (CTPs) subsequent to application of a filler-free (Res.A) or an ion-releasing resin (Res.B) to ethylenediaminetetraacetic acid (EDTA)-demineralized dentin with or without zoledronate-containing primer (Zol-primer) pre-treatment. The chemical modification induced following treatments and artificial saliva (AS) storage was also analyzed through attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR). Totally EDTA-demineralized specimens were infiltrated with Res.A or Res.B with or without Zol-primer pre-treatment, light-cured, and immersed in AS for up to 4 wk. ICTP release was reduced following infiltration with Res.B and further reduced when Res.B was used with Zol-primer; remarkable phosphate mineral uptake was attained after AS storage. CTX release was increased in Res.A- and Res.B-treated dentin. However, when Zol-primer was used with Res.A, the CTX release fell significantly compared to the other tested resin-infiltration methods. In conclusion, zoledronate offers an additional inhibitory effect to the ion-releasing resins in MMP-mediated collagen degradation. However, Zol-primer induces a modest reduction in CTX release only when used with resin-based systems containing no ion-releasing fillers. PMID:25074494

  9. Effects of CO2 laser energy on dentin permeability.

    Science.gov (United States)

    Pashley, E L; Horner, J A; Liu, M; Kim, S; Pashley, D H

    1992-06-01

    The effect of a CO2 laser on the structure and permeability of smear layer-covered human dentin was evaluated in vitro. Three different energy levels were used (11, 113, and 566 J/cm2). The lowest exposure to the laser energy increased dentin permeability, measured as a hydraulic conductance, due to partial measured as a hydraulic conductance, due to partial loss of the superficial smear layer and smear plugs. The intermediate energy level also increased dentin permeability by crater formation, making the dentin thinner. The lack of uniform glazing of the surface of the crater, leaving its surface porous and in communication with the underlying dentinal tubules also contributed to the increase in dentin permeability seen with the intermediate laser energy. The highest laser energy produced complete glazing of the crater surfaces and sealed the dentinal tubules beneath the crater. However, it also completely removed the smear layer in a halo zone about 100-microns wide around each crater which increased the permeability of the pericrater dentin at the same time it decreased the permeability of the dentin within the crater. The combined use of scanning electron microscopy and permeability measurements provides important complementary information that is essential in evaluating the effects of lasers on dentin.

  10. InAs pixel matrix detectors fabricated by diffusion of Zn in a metal-organic vapour-phase epitaxy reactor

    Energy Technology Data Exchange (ETDEWEB)

    Saeynaetjoki, A. [Optoelectronics Laboratory, Helsinki University of Technology, P.O. Box 3500, 02015 HUT (Finland)]. E-mail: antti.saynatjoki@tkk.fi; Kostamo, P. [Optoelectronics Laboratory, Helsinki University of Technology, P.O. Box 3500, 02015 HUT (Finland); Sormunen, J. [Optoelectronics Laboratory, Helsinki University of Technology, P.O. Box 3500, 02015 HUT (Finland); Riikonen, J. [Optoelectronics Laboratory, Helsinki University of Technology, P.O. Box 3500, 02015 HUT (Finland); Lankinen, A. [Optoelectronics Laboratory, Helsinki University of Technology, P.O. Box 3500, 02015 HUT (Finland); Lipsanen, H. [Optoelectronics Laboratory, Helsinki University of Technology, P.O. Box 3500, 02015 HUT (Finland); Andersson, H. [Oxford Instruments Analytical Oy (United Kingdom); Banzuzi, K. [Oxford Instruments Analytical Oy (United Kingdom); Nenonen, S. [Oxford Instruments Analytical Oy (United Kingdom); Sipilae, H. [Oxford Instruments Analytical Oy (United Kingdom); Vaijaervi, S. [Oxford Instruments Analytical Oy (United Kingdom); Lumb, D. [Science Payload and Advanced Concepts Office, ESA/ESTEC, Nordwijk (Netherlands)

    2006-07-01

    We introduce a zinc diffusion process to fabricate an InAs-based detector matrix using an atmospheric pressure metal-organic vapour-phase epitaxy reactor. Current-voltage characteristics are measured and different diffusion parameters are experimented. Spectral alpha radiation response of the diode is reported. To our knowledge, this is the first time that InAs was used as an alpha particle detector.

  11. An X-ray microtomography study on the mineral concentration of carious dentine removed during cavity preparation in deciduous molars.

    Science.gov (United States)

    Willmott, N S; Wong, F S L; Davis, G R

    2007-01-01

    Dentists use a number of criteria in order to assess when a cavity is caries free, amongst which hardness is probably the most widely used. However, the judgement is subjective. X-ray microtomography (XMT) is a non-destructive microscopic technique that allows in vitro specimens to be scanned, manipulated and then rescanned. In this study, a high-definition XMT scanner was used to determine the mineral distribution of carious dentine in 10 deciduous molars, and the extent of dentine removed by an experienced clinician was investigated. For each tooth, after an initial XMT scan, caries was removed using a steel bur in a slow hand-piece. The tooth was then repositioned and rescanned. Mineral concentrations were calculated from the linear attenuation coefficients assuming the mineral phase to be hydroxyapatite and the organic phase to be collagen. The volume of dentine tissues removed was calculated by subtracting data of the second scan from the first. The results showed that the mean modal mineral concentration for the 10 teeth was 1.42 g x cm(-3) for sound dentine. Because of uncertainty about collagen concentration in carious dentine, the mean modal mineral concentration for the carious dentine had a range of 0.37-0.5 g x cm(-3). It was found that the subjective criteria used by the operator could lead to inconsistency of cavity preparation. The cavities could be overprepared by 8.5-44.3% in volume. However, the overpreparation was not uniform throughout the cavity: residual demineralised dentine could still be detected in the postoperative scan in isolated regions.

  12. Shear bond strength of amalgam to dentin using different dentin adhesive systems

    Directory of Open Access Journals (Sweden)

    Farimah Sardari

    2012-01-01

    Full Text Available Background and Aims: The aim of this in vitro study was to assess the shear bond strength of amalgam to dentin using four dentin adhesive systems.Materials and Methods: One hundred human molars were selected. After enamel removal, a dentin cylinder with 3 mm thickness was prepared. Eighty specimens were resorted with amalgam and four dentin adhesive systems as follows (n=20: group 1, Scotch Bond Multi-Purpose; group 2, One Coat Bond; group 3, PQ1; and group 4, Panavia-F. In group 5, 20 specimens were resorted with amalgam and varnish as control group. The specimens were incubated at 37°C for 24 h. The shear bond strengths were then measured by using push out method. The data were analyzed by one-way ANOVA and post hoc Duncan's tests.Results: Mean values for bond strengths of test groups were as follows: group 1=21.03±8.9, group 2=23.47±9, group 3=13.16±8.8, group 4=20.07±8.9 and group 5=14.15±8.7 MPa±SD. One-way ANOVA showed the statistically significant difference between the bond strengths of five groups (P=0.001. Post hoc Duncan's test showed significant difference between groups 1and 3 (P=0.008, groups 1 and 5 (P=0.019, groups 2 and 5 (P=0.0008, groups 4 and 5 (P=0.042, and groups 3 and 4 (P=0.018.Conclusion: Results of this study showed that the bond strength of amalgam to dentin using One Coat Bond as dentin adhesive system was higher than that observed in other dentin adhesive systems.

  13. How to increase the durability of resin-dentin bonds.

    Science.gov (United States)

    Pashley, David H; Tay, Franklin R; Imazato, Satoshi

    2011-09-01

    Resin-dentin bonds are not as durable as was previously thought. Microtensile bond strengths often fall 30% to 40% in 6 to 12 months. The cause of this poor durability is a combination of the activation of matrix metalloproteinases (MMPs) by weak acids such as lactic acid released by caries-producing bacteria, and acid-etchants used in adhesive bonding systems. These acids uncover and activate matrix-bound MMPs. The other contributing factor is incomplete resin infiltration. If all exposed collagen fibrils were enveloped by resin, the MMPs would not have free access to water, an obligatory requirement of these enzymes. Recently, several inhibitors of MMPs have been added to adhesive primers. Examples include chlorhexidine (CHX), benzalkonium chloride (BAC), and MDPB, an antibacterial monomer used in a two-step self-etching primer adhesive. The advantage of MDPB over CHX and BAC is that it polymerizes with adhesive resins and cannot leach from the hybrid layer. This is an example of what can be termed a "therapeutic adhesive system" that provides anti-MMP activity along with antibacterial qualities.

  14. Regeneration of dental pulp/dentine complex with a three-dimensional and scaffold-free stem-cell sheet-derived pellet.

    Science.gov (United States)

    Na, Sijia; Zhang, Hao; Huang, Fang; Wang, Weiqi; Ding, Yin; Li, Dechao; Jin, Yan

    2016-03-01

    Dental pulp/dentine complex regeneration is indispensable to the construction of biotissue-engineered tooth roots and represents a promising approach to therapy for irreversible pulpitis. We used a tissue-engineering method based on odontogenic stem cells to design a three-dimensional (3D) and scaffold-free stem-cell sheet-derived pellet (CSDP) with the necessary physical and biological properties. Stem cells were isolated and identified and stem cells from root apical papilla (SCAPs)-based CSDPs were then fabricated and examined. Compact cell aggregates containing a high proportion of extracellular matrix (ECM) components were observed, and the CSDP culture time was prolonged. The expression of alkaline phosphatase (ALP), dentine sialoprotein (DSPP), bone sialoprotein (BSP) and runt-related gene 2 (RUNX2) mRNA was higher in CSDPs than in cell sheets (CSs), indicating that CSDPs have greater odonto/osteogenic potential. To further investigate this hypothesis, CSDPs and CSs were inserted into human treated dentine matrix fragments (hTDMFs) and transplanted into the subcutaneous space in the backs of immunodeficient mice, where they were cultured in vivo for 6 weeks. The root space with CSDPs was filled entirely with a dental pulp-like tissue with well-established vascularity, and a continuous layer of dentine-like tissue was deposited onto the existing dentine. A layer of odontoblast-like cells was found to express DSPP, ALP and BSP, and human mitochondria lined the surface of the newly formed dentine-like tissue. These results clearly indicate that SCAP-CSDPs with a mount of endogenous ECM have a strong capacity to form a heterotopic dental pulp/dentine complex in empty root canals; this method can be used in the fabrication of bioengineered dental roots and also provides an alternative treatment approach for pulp disease. Copyright © 2013 John Wiley & Sons, Ltd.

  15. Porcine dentin sialoprotein glycosylation and glycosaminoglycan attachments

    Directory of Open Access Journals (Sweden)

    Yamakoshi Fumiko

    2011-02-01

    Full Text Available Abstract Background Dentin sialophosphoprotein (Dspp is a multidomain, secreted protein that is critical for the formation of tooth dentin. Mutations in DSPP cause inherited dentin defects categorized as dentin dysplasia type II and dentinogenesis imperfecta type II and type III. Dentin sialoprotein (Dsp, the N-terminal domain of dentin sialophosphoprotein (Dspp, is a highly glycosylated proteoglycan, but little is known about the number, character, and attachment sites of its carbohydrate moieties. Results To identify its carbohydrate attachment sites we isolated Dsp from developing porcine molars and digested it with endoproteinase Glu-C or pronase, fractionated the digestion products, identified fractions containing glycosylated peptides using a phenol sulfuric acid assay, and characterized the glycopeptides by N-terminal sequencing, amino acid analyses, or LC/MSMS. To determine the average number of sialic acid attachments per N-glycosylation, we digested Dsp with glycopeptidase A, labeled the released N-glycosylations with 2-aminobenzoic acid, and quantified the moles of released glycosylations by comparison to labeled standards of known concentration. Sialic acid was released by sialidase digestion and quantified by measuring β-NADH reduction of pyruvic acid, which was generated stoichiometrically from sialic acid by aldolase. To determine its forms, sialic acid released by sialidase digestion was labeled with 1,2-diamino-4,5-methyleneoxybenzene (DMB and compared to a DMB-labeled sialic acid reference panel by RP-HPLC. To determine the composition of Dsp glycosaminoglycan (GAG attachments, we digested Dsp with chondroitinase ABC and compared the chromotagraphic profiles of the released disaccharides to commercial standards. N-glycosylations were identified at Asn37, Asn77, Asn136, Asn155, Asn161, and Asn176. Dsp averages one sialic acid per N-glycosylation, which is always in the form of N-acetylneuraminic acid. O-glycosylations were

  16. Regeneratieve capaciteit van de pulpa: adulte humane stamcellen uit de pulpa: meer dan reparatie van dentine

    NARCIS (Netherlands)

    Bronckers, A.L.J.J.

    2010-01-01

    Vorming van tertiair dentine is de natuurlijke reactie van de pulpa om zich te beschermen na verwonding. Reactief dentine wordt geproduceerd door de oorspronkelijke (primaire) odontoblasten die tijdelijk geactiveerd worden. Reparatief dentine wordt gevormd vanuit secundaire odontoblasten, ontstaan u

  17. Regeneratieve capaciteit van de pulpa: adulte humane stamcellen uit de pulpa: meer dan reparatie van dentine

    NARCIS (Netherlands)

    Bronckers, A.L.J.J.

    2010-01-01

    Vorming van tertiair dentine is de natuurlijke reactie van de pulpa om zich te beschermen na verwonding. Reactief dentine wordt geproduceerd door de oorspronkelijke (primaire) odontoblasten die tijdelijk geactiveerd worden. Reparatief dentine wordt gevormd vanuit secundaire odontoblasten, ontstaan u

  18. [Hereditary pathology of the enamel and dentin. A review of molecular genetic research].

    Science.gov (United States)

    Beliakov, Iu A; Elizarova, V M; Krotov, V A; Blinnikova, O E

    2000-01-01

    Mapped phenotype of imperfect amelogenesis, type II imperfect dentinogenesis, hereditary opalescent dentin, Capdepont's dysplasia, and type II dentin dysplasia is described for the first time in Russia. Classification of hereditary disorders in dentin development is presented.

  19. Matrix effect on the performance of headspace solid phase microextraction method for the analysis of target volatile organic compounds (VOCs) in environmental samples.

    Science.gov (United States)

    Higashikawa, Fábio S; Cayuela, Maria Luz; Roig, Asunción; Silva, Carlos A; Sánchez-Monedero, Miguel A

    2013-11-01

    Solid phase microextraction (SPME) is a fast, cheap and solvent free methodology widely used for environmental analysis. A SPME methodology has been optimized for the analysis of VOCs in a range of matrices covering different soils of varying textures, organic matrices from manures and composts from different origins, and biochars. The performance of the technique was compared for the different matrices spiked with a multicomponent VOC mixture, selected to cover different VOC groups of environmental relevance (ketone, terpene, alcohol, aliphatic hydrocarbons and alkylbenzenes). VOC recovery was dependent on the nature itself of the VOC and the matrix characteristics. The SPME analysis of non-polar compounds, such as alkylbenzenes, terpenes and aliphatic hydrocarbons, was markedly affected by the type of matrix as a consequence of the competition for the adsorption sites in the SPME fiber. These non-polar compounds were strongly retained in the biochar surfaces limiting the use of SPME for this type of matrices. However, this adsorption capacity was not evident when biochar had undergone a weathering/aging process through composting. Polar compounds (alcohol and ketone) showed a similar behavior in all matrices, as a consequence of the hydrophilic characteristics, affected by water content in the matrix. SPME showed a good performance for soils and organic matrices especially for non-polar compounds, achieving a limit of detection (LD) and limit of quantification (LQ) of 0.02 and 0.03 ng g(-1) for non-polar compounds and poor extraction for more hydrophilic and polar compounds (LD and LQ higher 310 and 490 ng g(-1)). The characteristics of the matrix, especially pH and organic matter, had a marked impact on SPME, due to the competition of the analytes for active sites in the fiber, but VOC biodegradation should not be discarded in matrices with active microbial biomass.

  20. Effect of dentin location and long-term water storage on bonding effectiveness of dentin adhesives.

    Science.gov (United States)

    De Munck, Jan; Mine, Atsushi; Vivan Cardoso, Marcio; De Almeida Neves, Aline; Van Landuyt, Kirsten L; Poitevin, André; Van Meerbeek, Bart

    2011-01-01

    Dentin is a variable substrate with properties that change considerable in a single surface. The purpose of this study was to evaluate the bonding effectiveness to these different dentin locations and evaluate these differences over time. After bonding procedures with five different adhesives, small micro-tensile bond strength (µTBS) beams were prepared and dichotomously divided in 'center' and 'periphery' dentin specimens. After 1 week, 3, 6 and 12 months of water storage the µTBS of specimens of each group was determined, enabling a paired study design. The bond strengths of both etch&rinse adhesives were insensitive to regional variability. For the two-step self-etch adhesives, a marked increase in bond strengths was observed with increasing amount of intertubular dentin. Regional variability did not affect the long-term bonding effectiveness for any of the adhesives tested. In conclusion, only for the mild self-etch adhesives, µTBS to 'periphery' dentin was higher than for the 'center' specimens.

  1. Frameshift mutations in dentin phosphoprotein and dependence of dentin disease phenotype on mutation location.

    Science.gov (United States)

    Nieminen, Pekka; Papagiannoulis-Lascarides, Lisa; Waltimo-Siren, Janna; Ollila, Päivi; Karjalainen, Sara; Arte, Sirpa; Veerkamp, Jaap; Tallon Walton, Victoria; Chimenos Küstner, Eduard; Siltanen, Tarja; Holappa, Heidi; Lukinmaa, Pirjo-Liisa; Alaluusua, Satu

    2011-04-01

    We describe results from a mutational analysis of the region of the dentin sialophosphoprotein (DSPP) gene encoding dentin phosphoprotein (DPP) in 12 families with dominantly inherited dentin diseases. In eight families (five mutations in the N-terminal third of DPP), the clinical and radiologic features were uniform and compatible with dentin dysplasia type II (DD-II) with major clinical signs in the deciduous dentition. In the other families (four mutations in the more C-terminal part), the permanent teeth also were affected, and the diseases could be classified as variants of dentinogenesis imperfecta. Attrition was not prominent, but periapical infections were common. Discoloring with varying intensity was evident, and pulps and root canals were obliterated in the permanent dentition. All mutations caused a frameshift that replaced the Ser-Ser-Asx repeat by a code for a hydrophobic downstream sequence of approximately original length. We conclude that frameshift mutations in DSPP explain a significant part of dentin diseases. Furthermore, we propose that the location of the mutation is reflected in the phenotypic features as a gradient from DD-II to more severe disease that does not conform to the classic definitions of DI-II. Copyright © 2011 American Society for Bone and Mineral Research.

  2. Effect of stress and temperature on the micromechanics of creep in highly irradiated bone and dentin

    Energy Technology Data Exchange (ETDEWEB)

    Singhal, Anjali, E-mail: anjalisinghal2007@u.northwestern.edu [Department of Materials Science and Engineering, Northwestern University, Evanston, IL 60208 (United States); Deymier-Black, Alix C., E-mail: alixdeymier2010@u.northwestern.edu [Department of Materials Science and Engineering, Northwestern University, Evanston, IL 60208 (United States); Almer, Jonathan D., E-mail: almer@aps.anl.gov [X-ray Science Division, Advanced Photon Source, Argonne National Laboratory, Argonne, IL 60439 (United States); Dunand, David C., E-mail: dunand@northwestern.edu [Department of Materials Science and Engineering, Northwestern University, Evanston, IL 60208 (United States)

    2013-04-01

    Synchrotron X-ray diffraction is used to study in situ the evolution of phase strains during compressive creep deformation in bovine bone and dentin for a range of compressive stresses and irradiation rates, at ambient and body temperatures. In all cases, compressive strains in the collagen phase increase with increasing creep time (and concomitant irradiation), reflecting macroscopic deformation of the sample. By contrast, compressive elastic strains in the hydroxyapatite (HAP) phase, created upon initial application of compressive load on the sample, decrease with increasing time (and irradiation) for all conditions; this load shedding behavior is consistent with damage at the HAP–collagen interface due to the high irradiation doses (from ∼ 100 to ∼ 9,000 kGy). Both the HAP and fibril strain rates increase with applied compressive stress, temperature and irradiation rate, which is indicative of greater collagen molecular sliding at the HAP–collagen interface and greater intermolecular sliding (i.e., plastic deformation) within the collagen network. The temperature sensitivity confirms that testing at body temperature, rather than ambient temperature, is necessary to assess the in vivo behavior of bone and teeth. The characteristic pattern of HAP strain evolution with time differs quantitatively between bone and dentin, and may reflect their different structural organization. Highlights: ► First systematic study of varying creep stresses on bone and dentin at nanoscale. ► HAP in highly irradiated bone and dentin sheds load during creep at all stresses. ► This suggests HAP–collagen interfacial damage due to irradiation and applied stress. ► HAP and fibril strain rates increase with stress, temperature and irradiation. ► Temporal evolution of strains different in bone and dentin.

  3. First-time isolation of Candida dubliniensis from plaque and carious dentine of primary teeth.

    Science.gov (United States)

    Kneist, S; Borutta, A; Sigusch, B W; Nietzsche, S; Küpper, H; Kostrzewa, M; Callaway, A

    2015-08-01

    To determine those organisms of the genus Candida associated with dental caries by investigating samples from active carious lesions. Within the genus Candida, the species Candida albicans and Candida dubliniensis are capable of forming chlamydospores and germ tubes. Until it became possible in 1995 to differentiate between the two species taxonomically, C. dubliniensis was falsely identified as C. albicans. Whilst the importance of C. albicans for rapidly progressing early childhood caries (ECC) has been recognised, so far there have been only reports about C. dubliniensis in connection with children/mothers who have been infected with HIV or already developed AIDS. In the present study, C. dubliniensis was for the first time isolated from plaque and carious dentine of a healthy five-year-old boy. As part of the investigation, a number of samples were collected from individual children affected by active dental caries. Amongst the samples, one in particular indicated that Candida species might be involved. The patient was a five-year-old boy with ECC of the primary dentition, scheduled for restorative treatment under general anaesthesia. Before treatment, a salivary, plaque (region of 54/55) and soft carious dentine sample from the tooth 51 was taken before extraction. The counts of yeasts, lactobacilli (LB) and mutans streptococci were determined in the samples. The boy's dmft was 11, which was dominated by the d component. In the saliva of the boy, LB and mutans streptococci (MS) were detected. In plaque and carious dentine, MS and most interestingly C. dubliniensis were present. The yeasts were visualised in carious dentine by means of scanning electron micrographs. Plaque and carious dentine may be a further habitat of C. dubliniensis.

  4. Shear bond strength of partial coverage restorations to dentin

    OpenAIRE

    Román Rodríguez, Juan Luis; Agustín Panadero, Rubén; Alonso Pérez Barquero, Jorge; Fons Font, Antonio; Solá Ruiz, María Fernanda

    2015-01-01

    Background When partial coverage restorations (veneers, inlays, onlays…) must be cemented to dentin, bond strength may not reach the same predictable values as to enamel. The purpose of this study was: 1. To compare, with a shear bond test, the bond strength to dentin of a total-etch and a self-etching bonding agent. 2. To determine whether creating microretention improves the bond strength to dentin. Material and Methods Two bonding agents were assayed, Optibond FL® (Kerr), two-bottle adhesi...

  5. Targeted disruption of two small leucine-rich proteoglycans, biglycan and decorin, excerpts divergent effects on enamel and dentin formation.

    Science.gov (United States)

    Goldberg, M; Septier, D; Rapoport, O; Iozzo, R V; Young, M F; Ameye, L G

    2005-11-01

    Small leucine-rich proteoglycans have been suggested to affect mineralization of dental hard tissues. To determine the functions of two of these small proteoglycans during the early stages of tooth formation, we characterized the dental phenotypes of biglycan (BGN KO) and decorin deficient (DCN KO) mice and compared them to that of wild type mice. Each targeted gene disruption resulted in specific effects on dentin and enamel formation. Dentin was hypomineralized in both knock out mice, although the effect was more prominent in the absence of decorin. Enamel formation was dramatically increased in newborn biglycan knockout mice but delayed in absence of decorin. Increased enamel formation in the former case resulted from an upregulation of amelogenin synthesis whereas delayed enamel formation in the later case was most probably an indirect consequence of the high porosity of the underlying dentin. Enamelin expression was unchanged in BGN KO, and reduced in DCN KO. Dentin sialoprotein (DSP), a member of the family of phosphorylated extracellular matrix proteins that play a role in dentinogenesis, was overexpressed in BGN-KO odontoblasts and in the sub-odontoblastic layer. In contrast, a decreased expression of DSP was detected in DCN KO. Dentin matrix protein-1 (DMP-1), bone sialoprotein (BSP) and osteopontin (OPN) were upregulated in BGN KO and downregulated in the DCN KO. Despite the strong effects induced by these deficiencies in newborn mice, no significant difference was detected between the three genotypes in adult mice, suggesting that the effects reported here in newborn mice are transient and subjected to self-repair.

  6. Dentine tubule infection and endodontic therapy implications.

    Science.gov (United States)

    Oguntebi, B R

    1994-07-01

    A critical review of the literature suggests that the microenvironment of dentinal tubules appears to favour the selection of relatively few bacterial types irrespective of the aetiology of the infection process; coronal dental caries or pulpar necrosis. These bacteria may constitute an important reservoir from which root canal infection and reinfection may occur following pulp necrosis or during and after endodontic treatment. Previous studies of this microflora have utilized microbiological culture techniques which need to be supplemented by those that allow in situ demonstration as well as identification of the bacteria. Newer treatment strategies that are designed to eliminate this microflora must include agents that can penetrate the dentinal tubules and destroy these microorganisms, since they are located in an area beyond the host defence mechanisms where they cannot be reached by systemically administered antimicrobial agents.

  7. Ptychographic X-ray nanotomography quantifies mineral distributions in human dentine

    Science.gov (United States)

    Zanette, I.; Enders, B.; Dierolf, M.; Thibault, P.; Gradl, R.; Diaz, A.; Guizar-Sicairos, M.; Menzel, A.; Pfeiffer, F.; Zaslansky, P.

    2015-03-01

    Bones are bio-composites with biologically tunable mechanical properties, where a polymer matrix of nanofibrillar collagen is reinforced by apatite mineral crystals. Some bones, such as antler, form and change rapidly, while other bone tissues, such as human tooth dentine, develop slowly and maintain constant composition and architecture for entire lifetimes. When studying apatite mineral microarchitecture, mineral distributions or mineralization activity of bone-forming cells, representative samples of tissue are best studied at submicrometre resolution while minimizing sample-preparation damage. Here, we demonstrate the power of ptychographic X-ray tomography to map variations in the mineral content distribution in three dimensions and at the nanometre scale. Using this non-destructive method, we observe nanostructures surrounding hollow tracts that exist in human dentine forming dentinal tubules. We reveal unprecedented quantitative details of the ultrastructure clearly revealing the spatially varying mineralization density. Such information is essential for understanding a variety of natural and therapeutic effects for example in bone tissue healing and ageing.

  8. Analysis of the soluble human tooth proteome and its ability to induce dentin/tooth regeneration.

    Science.gov (United States)

    Chun, So Young; Lee, Hyo Jung; Choi, Young Ae; Kim, Kyung Min; Baek, Sang Heum; Park, Hyo Sang; Kim, Jae-Young; Ahn, Jung-Mo; Cho, Je-Yeol; Cho, Dong-Woo; Shin, Hong-In; Park, Eui Kyun

    2011-01-01

    While the soluble proteins of human teeth consist of various extracellular matrix and bioactive proteins, they have not yet been characterized fully. Moreover, the role they play in tooth regeneration is not clear. Analysis of the soluble proteins in human teeth by liquid chromatography-mass spectrometry revealed 147 different ethylenediaminetetraacetic acid-soluble tooth proteins (ESTPs). Of these, 29 had not been shown previously to be present in human teeth. To determine their effect on the in vitro responses of dental pulp stem cells (DPSCs), DPSCs were cultured in ESTP-coated culture plates and three-dimensional scaffolds. The ESTPs significantly enhanced DPSC odontoblast differentiation and mineralization in vitro, but had only partial effect on bone marrow stem cells or adipose tissue stem cells. To test the effect of ESTPs on in vivo dentin and tooth formation, mouse embryonic tooth-forming primordia and xenogenic murine apical bud epithelium/human DPSC composites were treated with ESTPs before implantation under the renal capsule of ICR mice. ESTP treatment promoted the formation of morphologically normal teeth by the tooth-forming primordium regions and enhanced the development of a regular and large dentin structure by the composites. These observations suggest that human ESTPs contain dentinogenic proteins and can promote dentin and tooth formation.

  9. The Crystal Characteristics of Enamel and Dentin by XRD Method

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Crystal characteristics of tooth enamel and dentin were investigated using XRD, SEM, and EPMA methods.The results show that the mineral phase in enamel is HA and in dentin is HA and minor whitlock ites.The dentin HA and the enamel HA have different crystallinity, the crystallinity of enamel HA is much higher than that of dentin HA.The average particle size of the enamel HA and dentin HA are 897A and 309A, respectively.The HA in enamel is regularly arranged, and in dentin the arrangement of HA is diifferent from the enamel HA in the same section.Both the enamel and the dentin are mainly consisted of Ca, P, O, and C, and the trace elements Mg , Sr, Al, Na , and K.The dentin contains more trace elements than the enamel.However,the incorporation of trace elements in both dentin and enamel are very limited.Other impurities such as F and Cl are less than their detection limit.The a and c values of enamel HA are 9.433A and 6.8A, and those of thedentin HA are 9.498A and 6.896A, respectively.The expansion in a value results from those the larger size of [CO3 ]2 group substituing for the smaller [ OH]- group in the channel, and replacement of [ OH ]- by[ CO3 ]2- dominates the change in cell parameter, taking into account of other trace elements.

  10. Mineral content of the dentine remaining after chemomechanical caries removal.

    Science.gov (United States)

    Yip, H K; Beeley, J A; Stevenson, A G

    1995-01-01

    Although the dentine remaining after chemomechanical caries removal appears sound by normal clinical criteria, no definitive evidence has yet been obtained to confirm that the dentine surface is in fact mineralised. The aim of this study was to use backscattered electron (BSE) imaging and electron probe micro-analysis (EPMA) to ascertain the level of mineralisation of the dentine remaining in cavities prepared by this technique. Carious dentine was removed from carious lesions by means of N-monochloro-DL-2-aminobutyric acid (NMAB) or NMAB containing 2 mol/l urea. Sections of teeth in which caries removal was complete by normal clinical criteria were examined by EPMA and BSE. Dentine adjacent to the pulp was found to be less mineralised than the surrounding dentine. Although the superficial layer of dentine remaining on the cavity floors frequently appeared to have a slightly reduced mineral content, the results clearly indicated that there was no significant difference between this dentine and the underlying sound dentine.

  11. Tubular occlusion optimizes bonding of hydrophobic resins to dentin.

    Science.gov (United States)

    Sadek, F T; Pashley, D H; Ferrari, M; Tay, F R

    2007-06-01

    Although hydrophobic resins may be bonded to acid-etched dentin with an ethanol wet-bonding technique, the protocol is sensitive to moisture contamination when bonding is performed in deep dentin. This study tested the hypothesis that the use of oxalate or poly(glutamic) acid-modified, diluted ceramicrete (PADC) for dentinal tubule occlusion prevents fluid contamination and improves the bonding of an experimental hydrophobic adhesive to acid-etched, ethanol-dehydrated dentin. Mid-coronal and deep acid-etched moist dentin pre-treated with oxalate or PADC was dehydrated by ethanol wet-bonding and infiltrated with the experimental three-step etch-and-rinse hydrophobic adhesive under simulated pulpal pressure. Tensile bond strengths to deep dentin without pre-treatment were severely compromised. Conversely, oxalate and PADC pre-treatments reduced dentin permeability, prevented water contamination, and improved bond strengths. Minimal nanoleakage was identified within hybrid layers created in the oxalate- and PADC-pre-treated deep dentin. The use of tubular occluding agents optimized bonding of hydrophobic resins to dentin.

  12. Dentin permeability: effects of endodontic procedures on root slabs.

    Science.gov (United States)

    Fogel, H M; Pashley, D H

    1990-09-01

    The permeability of human radicular dentin was measured as a hydraulic conductance before and after treatment with K files and before and after subsequent treatment of the endodontic smear layer with NaOCl, 50% citric acid, or 3% monopotassium-monohydrogen oxalate. Filing reduced dentin permeability 25 to 49%, respectively, depending upon whether outer or inner root dentin was filed. The permeability of these smear layers was unaffected by 5% NaOCl but increased many times after treatment with 50% citric acid for 2 min. Oxalate treatment lowered root dentin permeability to levels below that produced by creation of smear layers due to the production of a crystalline precipitate.

  13. Clinical efficacy of toothpaste containing potassium citrate in treating dentin hypersensitivity

    Directory of Open Access Journals (Sweden)

    Shih-Ya Shen

    2009-12-01

    Conclusion: The prevalence of dentin hypersensitivity in this study was 38%. The use of desensitizing toothpaste containing potassium citrate with oral hygiene instruction can effectively reduce dentin hypersensitivity.

  14. [The properties of dentin and resinified dentin in the tensile test].

    Science.gov (United States)

    Xu, J

    1989-07-01

    The purpose of this study is to evaluate the effect of resinifying therapy to the hard tissue of tooth by using measurement of the tensile strength. The fresh extracted maxillary anterior teeth having been cleaned and sterilized were divided into two groups. The control group was placed into 9% N-saline solution of 37 +/- 1 degrees C. The experimental group was treated with resinifying therapy. The tensile specimens were shaped by turning in a lathe until it satisfied the tensile test requirement of Mechanics of Materials except that they were hollow. A set of special split jig was made for this test. Instron Universal Testing Machine was used for measuring the load on the specimens. The loading speed was 0.05 mm/min. The straining meter was used to measure the tensile strain. The result revealed that tensile strength of resinifying dentin was little lower than that of unresinified dentin. The resinified dentin didn't increases stiffness or brittleness.

  15. Chemical treatment of the intra-canal dentin surface: a new approach to modify dentin hydrophobicity

    Directory of Open Access Journals (Sweden)

    Cesar GAITAN-FONSECA

    2013-01-01

    Full Text Available Objective This study evaluated the hydrophobicity of dentin surfaces that were modified through chemical silanization with octadecyltrichlorosilane (OTS. Material and Methods An in vitro experimental study was performed using 40 human permanent incisors that were divided into the following two groups: non-silanized and silanized. The specimens were pretreated and chemically modified with OTS. After the chemical modification, the dentin hydrophobicity was examined using a water contact angle measurement (WCA. The effectiveness of the modification of hydrophobicity was verified by the fluid permeability test (FPT. Results and Conclusions Statistically significant differences were found in the values of WCA and FPT between the two groups. After silanization, the hydrophobic intraradicular dentin surface exhibited in vitro properties that limit fluid penetration into the sealed root canal. This chemical treatment is a new approach for improving the sealing of the root canal system.

  16. Cigarette smoke affects bonding to dentin.

    Science.gov (United States)

    Almeida e Silva, Junio S; de Araujo, Edson Medeiro; Araujo, Elito

    2010-01-01

    This in vitro study evaluated the microtensile bond strength (muTBS) of composite resin bonded to dentin that had been contaminated by cigarette smoke. Ten extracted unerupted human third molars were used: Six molars were prepared for muTBS testing, while the other four molars were assigned to pre- and post-etching scanning electronic microscopy (SEM) analysis. The 20 specimens obtained from the 10 coronal portions were distributed into two experimental groups so that each tooth served as its own control. Group 1 underwent a daily toothbrushing simulation and exposure to a smoking simulation chamber, while Group 2 received only a daily simulated toothbrushing. Student's t-test demonstrated that Group 1 samples demonstrated significantly lower bond strength (49.58 MPa) than Group 2 samples (58.48 MPa). Pre and postetching SEM analysis revealed the presence of contaminants on the dentinal surfaces of the Group 1 specimens. It was concluded that contamination by cigarette smoke decreases the bond strength between dentin and composite resin.

  17. Clinical effectiveness of contemporary dentin bonding agents

    Science.gov (United States)

    Krithikadatta, Jogikalmat

    2010-01-01

    Aim: The purpose of this paper is to review the literature on the clinical effectiveness of contemporary resin-based dentin bonding agents primarily focussing on the longevity of restoration. Materials and Methods: The literature published from June 2004 up to September 2010 was reviewed for clinical trials that tested the effectiveness of dentin bonding agents in the longevity of noncarious class V restoration. Results of each study reported using the USPHS criteria for clinical assessment of restoration were included and tabulated. The American Dental Association guidelines for dentin and enamel adhesives were used as a reference to compare the performance of individual bonding agents. Kruskal–Wallis followed by Mann–Whitney U was done to compare the mean Alfa score percentage for the three categories of bonding systems [etch-and-rinse (ER), self-etch primer (SEP), and self-etch-adhesive (SEA)]. Results: A comparison of the mean Alfa score percentages revealed no difference between the ER, SEP, and SEA categories of bonding systems except for marginal adaptation where ER was found to be superior to SEA. Conclusion: The clinical effectiveness of resin-based bonding agents is comparable among the three categories. PMID:21217944

  18. A Mechanistic study of Plasma Treatment Effects on Demineralized Dentin Surfaces for Improved Adhesive/Dentin Interface Bonding

    Science.gov (United States)

    Dong, Xiaoqing; Chen, Meng; Wang, Yong; Yu, Qingsong

    2014-01-01

    Our previous work has shown that non-thermal plasma treatment of demineralized dentin significantly (p<0.05) improved adhesive/dentin bonding strength for dental composite restoration as compared with the untreated controls. This study is to achieve mechanistic understanding of the plasma treatment effects on dentin surface through investigating the plasma treated dentin surfaces and their interaction with adhesive monomer, 2-Hydroxyethyl methacrylate (HEMA). The plasma treated dentin surfaces from human third molars were evaluated by water contact angle measurements and scanning electron microscopy (SEM). It was found that plasma-treated dentin surface with subsequent HEMA immersion (Plasma/HEMA Treated) had much lower water contact angle compared with only plasma-treated (Plasma Treated) or only HEMA immersed (HEMA Treated) dentin surfaces. With prolong water droplet deposition time, water droplets spread out completely on the Plasma/HEMA Treated dentin surfaces. SEM images of Plasma/HEMA Treated dentin surfaces verified that dentin tubules were opened-up and filled with HEMA monomers. Extracted type I collagen fibrils, which was used as simulation of the exposed dentinal collagen fibrils after acid etching step, were plasma treated and analyzed with Fourier transform infrared spectroscopy (FT-IR) and circular dichroism (CD) spectra. FT-IR spectra of the Plasma/HEMA Treated collage fibrils showed broadened amide I peak at 1660 cm−1 and amide II at 1550 cm−1, which indicate secondary structure changes of the collagen fibrils. CD spectra indicated that 67.4% collagen helix structures were denatured after plasma treatment. These experimental results demonstrate that non-thermal argon plasma treatment was very effective in loosing collagen structure and enhancing adhesive monomer penetration, which are beneficial to thicker hybrid layer and longer resin tag formation, and consequently enhance adhesive/dentin interface bonding. PMID:25267936

  19. Rescue of odontogenesis in Dmp1-deficient mice by targeted re-expression of DMP1 reveals roles for DMP1 in early odontogenesis and dentin apposition in vivo.

    Science.gov (United States)

    Lu, Yongbo; Ye, Ling; Yu, Shibin; Zhang, Shubin; Xie, Yixia; McKee, Marc D; Li, Yan Chun; Kong, Juan; Eick, J David; Dallas, Sarah L; Feng, Jian Q

    2007-03-01

    Dentin matrix protein 1 (DMP1) is expressed in both pulp and odontoblast cells and deletion of the Dmp1 gene leads to defects in odontogenesis and mineralization. The goals of this study were to examine how DMP1 controls dentin mineralization and odontogenesis in vivo. Fluorochrome labeling of dentin in Dmp1-null mice showed a diffuse labeling pattern with a 3-fold reduction in dentin appositional rate compared to controls. Deletion of DMP1 was also associated with abnormalities in the dentinal tubule system and delayed formation of the third molar. Unlike the mineralization defect in Vitamin D receptor-null mice, the mineralization defect in Dmp1-null mice was not rescued by a high calcium and phosphate diet, suggesting a different effect of DMP1 on mineralization. Re-expression of Dmp1 in early and late odontoblasts under control of the Col1a1 promoter rescued the defects in mineralization as well as the defects in the dentinal tubules and third molar development. In contrast, re-expression of Dmp1 in mature odontoblasts, using the Dspp promoter, produced only a partial rescue of the mineralization defects. These data suggest that DMP1 is a key regulator of odontoblast differentiation, formation of the dentin tubular system and mineralization and its expression is required in both early and late odontoblasts for normal odontogenesis to proceed.

  20. Inhibitory effect of silver diamine fluoride on dentine demineralisation and collagen degradation.

    Science.gov (United States)

    Mei, May L; Ito, L; Cao, Y; Li, Q L; Lo, Edward C M; Chu, C H

    2013-09-01

    To investigate the inhibitory effects of 38% silver diamine fluoride (SDF) on demineralised dentine. Human dentine blocks were demineralised and allocated to four groups: SF, F, S and W. The blocks in group SF received a topical application of 38% SDF solution (253,900ppm Ag, 44,800ppm F), group F received a 10% sodium fluoride solution (44,800ppm F), group S received a 42% silver nitrate solution (253,900ppm Ag) and group W received deionised water (control). They were subjected to pH cycling using demineralisation solution (pH 5) and remineralisation solution (pH 7) for 8 days. The surface morphology, crystal characteristics, lesion depth and collagen matrix degradation of the specimens were investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), micro-CT testing and spectrophotometry with a hydroxyproline assay. The surface morphology under SEM showed evident demineralisation with exposed collagen in groups S and W, but not in group SF. Clusters of granular spherical grains were observed in the cross-sections of specimens in groups SF and F. XRD revealed precipitates of silver chloride in groups SF and S. The mean lesion depths (±SD) of groups SF, F, S and W were 182 ± 32μm, 204 ± 26μm, 259 ± 42μm and 265 ± 40μm, respectively (SDF, FF and W (p<0.01). The use of 38% SDF inhibited demineralisation and preserved collagen from degradation in demineralised dentine. SDF application positively influences dentine remineralization. Copyright © 2013 Elsevier Ltd. All rights reserved.

  1. The effect of dentine location and tubule orientation on the bond strengths between resin and dentine.

    Science.gov (United States)

    Phrukkanon, S; Burrow, M F; Tyas, M J

    1999-05-01

    This study determined the influence of dentine structure on the micro-tensile bond strengths between resin and dentine of two different dentine adhesive systems (Single Bond, 3M Dental Products, St Paul, MN; MF-102 (experimental self-etching primer), GC Corporation, Tokyo, Japan). The study was separated into two main parts: bond strength measurement and investigation of the bonding interface. Twenty-two human premolars were used for the bond strength measurement. Each tooth was cut vertically, separating the tooth into mesio-distal halves. One half of the tooth was used to bond to a surface perpendicular to the dentinal tubules and other half to bond to a surface parallel to the tubules. For each half, six locations of dentine were bonded. Each material was used in accordance to the manufacturer's directions. Cylindrical hourglass-shaped specimens of 1.2 mm diameter at the bonded interface were manufactured. The bonds were stressed in tension at a crosshead speed of 1 mm/min. Mean bond strengths were compared using LSD, one-way ANOVA, and Student's t-test. The fractured surfaces were examined under a scanning electron microscope, and the frequency of fracture modes was compared using the Kruskal-Wallis and Mann-Whitney U tests. For the investigation of the bonded interface, four teeth were prepared by the same procedure used for the bond test specimens. The bonded interfaces were observed after an acid-base treatment or fracturing across the bonded interface, prior to investigation with a field-emission scanning electron microscope. For Single Bond, the bond strengths for mid-root dentine were significantly lower than for other locations (p 0.05). MF-102 bonded well to all locations of dentine while Single Bond showed a porous zone at the base of the hybrid layer. The bonds were not influenced by tubule orientation. The results indicate that the bond for Single Bond may be affected by its ability to penetrate demineralised dentine in different locations of a tooth

  2. Microporous, demineralized collagen matrices in intact radicular dentin created by commonly used calcium-depleting endodontic irrigants.

    Science.gov (United States)

    Tay, Franklin R; Gutmann, James L; Pashley, David H

    2007-09-01

    The use of calcium-depleting solutions in restorative dentistry results in demineralization of intact coronal dentin beneath smear layers. Likewise, application of calcium-depleting irrigants as final rinses might create demineralized collagen matrices in intact radicular dentin after removal of root canal wall smear layers created during canal shaping. These unsupported collagen matrices collapse on desiccation and might be difficult to detect in scanning electron microscopy dehydration techniques traditionally used in endodontic research. Demineralized collagen matrices were identified, by using a hexamethyldisilazane dehydration protocol, on the surface of smear layer-depleted radicular dentin when NaOCl was used as initial rinse, followed by the use of 17% ethylenediaminetetraacetic acid or BioPure MTAD as the final rinse. Compaction of conventional root filling materials over a demineralized collagen matrix in instrumented dentin is analogous to performing the same procedure against the predentin collagen network in the uninstrumented parts of root canals. The potential cons