Quantitative analysis of dental microwear in hadrosaurid dinosaurs, and the implications for hypotheses of jaw mechanics and feeding

Science.gov (United States)

Williams, Vincent S.; Barrett, Paul M.; Purnell, Mark A.

2009-01-01

Understanding the feeding mechanisms and diet of nonavian dinosaurs is fundamental to understanding the paleobiology of these taxa and their role in Mesozoic terrestrial ecosystems. Various methods, including biomechanical analysis and 3D computer modeling, have been used to generate detailed functional hypotheses, but in the absence of either direct observations of dinosaur feeding behavior, or close living functional analogues, testing these hypotheses is problematic. Microscopic scratches that form on teeth in vivo during feeding are known to record the relative motion of the tooth rows to each other during feeding and to capture evidence of tooth–food interactions. Analysis of this dental microwear provides a powerful tool for testing hypotheses of jaw mechanics, diet, and trophic niche; yet, quantitative analysis of microwear in dinosaurs has not been attempted. Here, we show that analysis of tooth microwear orientation provides direct evidence for the relative motions of jaws during feeding in hadrosaurid ornithopods, the dominant terrestrial herbivores of the Late Cretaceous. Statistical testing demonstrates that Edmontosaurus teeth preserve 4 distinct sets of scratches in different orientations. In terms of jaw mechanics, these data indicate an isognathic, near-vertical posterodorsal power stroke during feeding; near-vertical jaw opening; and propalinal movements in near anterior and near posterior directions. Our analysis supports the presence of a pleurokinetic hinge, and the straightness and parallelism of scratches indicate a tightly controlled occlusion. The dominance of scratched microwear fabrics suggests that Edmontosaurus was a grazer rather than a browser. PMID:19564603

Enamel microwear texture properties of IGF 11778 (Oreopithecus bambolii) from the late Miocene of Baccinello, Italy.

Science.gov (United States)

L' Engle Williams, Frank

2013-01-01

Late Miocene Oreopithecus bambolii has been posited as a folivore from its pronounced molar shearing crests. However, scanning electron microscopy yields conflicting results with one study of Oreopithecus showing folivory and another indicating a coarser diet was consumed. To address this debate, the dietary proclivities of the well-known IGF 11778 Oreopithecus bambolii specimen are reconstructed by comparing the enamel texture properties of this specimen to extant Alouatta palliata (n = 11), Cebus apella (n = 13), Gorilla gorilla (n = 9), Lophocebus albigena (n = 15), Pan troglodytes (n = 17) and Trachypithecus cristatus (n = 12). Dental microwear is captured by scanning facet 9, a Phase II facet on the hypoconid surface, using white-light confocal microscopy at 100x. The scanning was followed by scale-sensitive fractal analysis, yielding four texture characteristics. These were ranked before ANOVA with post-hoc tests of significance and multivariate analyses were conducted. Oreopithecus specimen IGF 11778 does not match any of the extant taxa consistently but in some analyses is associated with Lophocebus, and secondarily with Pan, Gorilla and Cebus outliers suggesting mixed-fruit and hard-object feeding characterized at least a portion of its diet. The partially open habitat of late Miocene Baccinello may have had resources with mechanically resistant foods, or foods found near ground level were consumed. Hard, brittle foods, insects, and or extraneous grit may have contributed to the greater use-wear complexity of the enamel surface observed in IGF 11778 compared to extant folivores. IGF 11778 does not exhibit the degree of anisotropy characterizing Trachypithecus and Alouatta. The partial resemblance of IGF 11778 to some great ape specimens may indicate intermittent extractive and or terrestrial foraging.

Dietary ecology of the extinct cave bear: Evidence of omnivory as inferred from dental microwear textures

OpenAIRE

D. Brent Jones; Larisa R.G. DeSantis

2016-01-01

The diet of the extinct European cave bear, Ursus spelaeus, has widely been debated. Diverging from the extant brown bear (Ursus arctos) approximately 1.2 million years ago, the cave bear is one of the most ubiquitous fossil bears occurring in Europe during the middle and Late Pleistocene. Early morphological studies suggested that the cave bear was likely specialized on processing tough and/or abrasive foods, while later two-dimensional low-magnification microwear studies suggested that they...

Dental microwear reveals mammal-like chewing in the neoceratopsian dinosaur Leptoceratops gracilis

Directory of Open Access Journals (Sweden)

Frank J. Varriale

2016-07-01

Full Text Available Extensive oral processing of food through dental occlusion and orbital mandibular movement is often cited as a uniquely mammalian trait that contributed to their evolutionary success. Save for mandibular translation, these adaptations are not seen in extant archosaurs or lepidosaurs. In contrast, some ornithischian dinosaurs show evidence of precise dental occlusion, habitual intraoral trituration and complex jaw motion. To date, however, a robust understanding of the diversity of jaw mechanics within non-avian dinosaurs, and its comparison with other vertebrates, remains unrealized. Large dental batteries, well-developed dental wear facets, and robust jaws suggests that neoceratopsian (horned dinosaurs were capable chewers. But, biomechanical analyses have assumed a relatively simple, scissor-like (orthal jaw mechanism for these animals. New analyses of dental microwear, presented here, show curvilinear striations on the teeth of Leptoceratops. These features indicate a rostral to caudal orbital motion of the mandible during chewing. A rostrocaudal mandibular orbit is seen in multituberculates, haramiyid allotherians, and some rodents, and its identification in Leptoceratops gracilis is the first evidence of complex, mammal-like chewing in a ceratopsian dinosaur. The term circumpalinal is here proposed to distinguish this new style of chewing from other models of ceratopsian mastication that also involve a palinal component. This previously unrecognized complexity in dinosaurian jaw mechanics indicates that some neoceratopsian dinosaurs achieved a mammalian level of masticatory efficiency through novel adaptive solutions.

Microwear and morphology: Functional relationships between human dental microwear and the mandible

OpenAIRE

Mahoney, Patrick

2006-01-01

Microscopic pits and scratches form on teeth during chewing, but the extent to which their formation is influenced by mandibular morphology is unknown. Digitized micrographs of the base of facet nine of the first, second, and third mandibular molar were used to record microwear features from an archaeological sample of modern humans recovered from Semna South in northern Sudan (n 38; 100 BC to AD 350). Micro- wear patterns of the molar row are correlated with mandibular corpus width and depth...

Predormancy omnivory in European cave bears evidenced by a dental microwear analysis of Ursus spelaeus from Goyet, Belgium

Science.gov (United States)

Peigné, Stéphane; Goillot, Cyrielle; Germonpré, Mietje; Blondel, Cécile; Bignon, Olivier; Merceron, Gildas

2009-01-01

Previous morphological and isotopic studies indicate that Late Pleistocene cave bear (Ursus spelaeus) diet ranged from mostly vegetarian to omnivory or even carnivory. However, such analyses do not provide information on seasonal diets, and only provide an average record of diet. A dental microwear analysis of 43 young and adult individuals demonstrate that, during the predormancy period, cave bears from Goyet (Late Pleistocene, Belgium) were not strictly herbivorous, but had a mixed diet composed of hard items (e.g., possibly bone), invertebrates (e.g., insects), meat (ungulates, small vertebrates), and/or plant matter (hard mast, seeds, herbaceous vegetations, and fruits). Therefore, our results indicate that cave bears at Goyet were generalist omnivores during the predormancy period, which is consistent with current data on the dietary ecology of extant bears during this season. These data also raise questions about the ecological role and causes of the extinction of cave bears. PMID:19706401

Tooth microwear formation rate in Gasterosteus aculeatus.

Science.gov (United States)

Baines, D C; Purnell, M A; Hart, P J B

2014-05-01

Tooth microwear feature densities were significantly increased in a population of laboratory-reared three-spined stickleback Gasterosteus aculeatus in four days, after they were transferred from a limnetic feeding regime to a benthic feeding regime. These results show that even in aquatic vertebrates with non-occluding teeth, changes in feeding can cause changes in tooth microwear in just a few days, as in mammals. © 2014 The Authors. Journal of Fish Biology published by John Wiley & Sons Ltd on behalf of The Fisheries Society of the British Isles.

Quantifying lithic microwear with load variation on experimental basalt flakes using LSCM and area-scale fractal complexity (Asfc)

International Nuclear Information System (INIS)

Stemp, W James; Morozov, Mikhail; Key, Alastair J M

2015-01-01

Working load is one factor that affects wear on stone tools. Despite the recognition of the importance of the relationship between working load and the development of microwear on stone tools, there have been few attempts to quantify differences in wear due to changes in load. In a controlled experiment, we used 30 basalt flakes knapped from raw material collected in Olduvai Gorge, Tanzania, Africa, to cut oak branches for the same number of strokes. For each flake, a different loading level was applied starting at 150 g and increasing by increments of 150 g to a maximum load of 4.5 kg. A laser scanning confocal microscope was used to mathematically document the surface texture of the flakes. The worn surface data were compared using area-scale fractal complexity (Asfc), calculated from relative areas, to determine the degree to which variation in loading significantly affected the amount of wear on the flake surfaces. Our results indicate that working load does play a role in the development of lithic microwear on these flakes and that discrimination of two worn flake surfaces, using mean square ratios of Asfc, based on variable load is consistently possible with load differences between ∼100 g and 4.5 kg. However, discrimination of microwear on flake surfaces was not consistent for all load level differences and discrimination became less consistent when working load differences were below ∼100 g. (paper)

An experimental bioactive dental ceramic for metal-ceramic restorations: Textural characteristics and investigation of the mechanical properties.

Science.gov (United States)

Goudouri, Ourania-Menti; Kontonasaki, Eleana; Papadopoulou, Lambrini; Manda, Marianthi; Kavouras, Panagiotis; Triantafyllidis, Konstantinos S; Stefanidou, Maria; Koidis, Petros; Paraskevopoulos, Konstantinos M

2017-02-01

The aim of this study was the evaluation of the textural characteristics of an experimental sol-gel derived feldspathic dental ceramic, which has already been proven bioactive and the investigation of its flexural strength through Weibull Statistical Analysis. The null hypothesis was that the flexural strength of the experimental and the commercial dental ceramic would be of the same order, resulting in a dental ceramic with apatite forming ability and adequate mechanical integrity. Although the flexural strength of the experimental ceramics was not statistically significant different compared to the commercial one, the amount of blind pores due to processing was greater. The textural characteristics of the experimental ceramic were in accordance with the standard low porosity levels reported for dental ceramics used for fixed prosthetic restorations. Feldspathic dental ceramics with typical textural characteristics and advanced mechanical properties as well as enhanced apatite forming ability can be synthesized through the sol-gel method. Copyright © 2016 Elsevier Ltd. All rights reserved.

Recovery of crystallographic texture in remineralized dental enamel.

Science.gov (United States)

Siddiqui, Samera; Anderson, Paul; Al-Jawad, Maisoon

2014-01-01

Dental caries is the most prevalent disease encountered by people of all ages around the world. Chemical changes occurring in the oral environment during the caries process alter the crystallography and microstructure of dental enamel resulting in loss of mechanical function. Little is known about the crystallographic effects of demineralization and remineralization. The motivation for this study was to develop understanding of the caries process at the crystallographic level in order to contribute towards a long term solution. In this study synchrotron X-ray diffraction combined with scanning electron microscopy and scanning microradiography have been used to correlate enamel crystallography, microstructure and mineral concentration respectively in enamel affected by natural caries and following artificial demineralization and remineralization regimes. In particular, the extent of destruction and re-formation of this complex structure has been measured. 2D diffraction patterns collected at the European Synchrotron Radiation Facility were used to quantify changes in the preferred orientation (crystallographic texture) and position of the (002) Bragg reflection within selected regions of interest in each tooth slice, and then correlated with the microstructure and local mineral mass. The results revealed that caries and artificial demineralization cause a large reduction in crystallographic texture which is coupled with the loss of mineral mass. Remineralization restores the texture to the original level seen in healthy enamel and restores mineral density. The results also showed that remineralization promotes ordered formation of new crystallites and growth of pre-existing crystallites which match the preferred orientation of healthy enamel. Combining microstructural and crystallographic characterization aids the understanding of caries and erosion processes and assists in the progress towards developing therapeutic treatments to allow affected enamel to regain

Dietary proclivities of Paranthropus robustus from Swartkrans, South Africa

Directory of Open Access Journals (Sweden)

L’Engle Williams Frank

2015-03-01

Full Text Available Pleistocene Paranthropus robustus fossils from Swartkrans have yielded stable isotope values suggesting some foraging on C4 plants possibly including underground storage organs. Dental microwear texture analysis on P. robustus (SK 6, SK 34 and SK 47 from Swartkrans Member 1 is performed to examine whether tooth surface damage from mastication agrees with prior dietary inferences from carbon isotopes. There is considerable variation in textural characteristics among the P. robustus specimens. Specifically, adult SK 34 stands apart from the two subadult specimens, SK 6 and SK 47, suggesting life history could be reflected in patterns of dental microwear texture characteristics, although seasonality and availability of fallback foods may also explain the variation observed in P. robustus. The fossils all exhibit elevated surface texture complexity, resembling the values for Lophocebus albigena and Cebus apella, and to a lesser extent, Pan troglodytes. Paranthropus robustus is dissimilar to primary folivores, such as Trachypithecus cristatus or folivore- frugivores such as Alouatta palliata suggesting leaves comprised very little of its diet. The textural fill volume of P. robustus differs from that observed in extant primates from tropical forests indicating extreme durophagy, perhaps a function of differences in habitat. Ingestion of extraneous grit on the underground parts of plants and from terrestrial resources, perhaps as fallback foods or as dietary staples, may account for these enamel textural properties and may help explain the mixed C3/C4 isotopic signal in P. robustus.

Recovery of crystallographic texture in remineralized dental enamel.

Directory of Open Access Journals (Sweden)

Samera Siddiqui

Full Text Available Dental caries is the most prevalent disease encountered by people of all ages around the world. Chemical changes occurring in the oral environment during the caries process alter the crystallography and microstructure of dental enamel resulting in loss of mechanical function. Little is known about the crystallographic effects of demineralization and remineralization. The motivation for this study was to develop understanding of the caries process at the crystallographic level in order to contribute towards a long term solution. In this study synchrotron X-ray diffraction combined with scanning electron microscopy and scanning microradiography have been used to correlate enamel crystallography, microstructure and mineral concentration respectively in enamel affected by natural caries and following artificial demineralization and remineralization regimes. In particular, the extent of destruction and re-formation of this complex structure has been measured. 2D diffraction patterns collected at the European Synchrotron Radiation Facility were used to quantify changes in the preferred orientation (crystallographic texture and position of the (002 Bragg reflection within selected regions of interest in each tooth slice, and then correlated with the microstructure and local mineral mass. The results revealed that caries and artificial demineralization cause a large reduction in crystallographic texture which is coupled with the loss of mineral mass. Remineralization restores the texture to the original level seen in healthy enamel and restores mineral density. The results also showed that remineralization promotes ordered formation of new crystallites and growth of pre-existing crystallites which match the preferred orientation of healthy enamel. Combining microstructural and crystallographic characterization aids the understanding of caries and erosion processes and assists in the progress towards developing therapeutic treatments to allow affected

Molar microwear in Praeanthropus afarensis: evidence for dietary stasis through time and under diverse paleoecological conditions.

Science.gov (United States)

Grine, Frederick E; Ungar, Peter S; Teaford, Mark F; El-Zaatari, Sireen

2006-09-01

Molar microwear fabrics in extant mammals vary with diet and, more particularly, the physical properties of the items that are consumed. Praeanthropus afarensis is well represented in the fossil record over a prolonged and radiometrically controlled temporal span, and reasonably robust paleoecological reconstructions are available for the various localities from which it is known. We therefore examined molar microwear in this species to determine whether diet varied in relation to time or in response to different ecological conditions. Of more than 70 specimens of Pr. afarensis that contain one or more worn permanent molars, only 19 were found to be suitable for microwear analysis. These derive from eight temporal horizons in the Laetolil Beds and Hadar Formation spanning approximately 400kyr (3.6-3.2Ma). Six paleoecological categories have been reconstructed for these horizons, and these were ranked on the basis of floral cover. None of the microwear variables observed for Pr. afarensis is significantly associated with either temporal or paleoecological rank. Thus, microwear and, by extension, diet does not appear to have altered significantly in Pr. afarensis through time or in response to different paleoecological circumstances. The wear pattern that appears to have characterized Pr. afarensis overlaps extensively that of Gorilla gorilla beringei and differs notably from the fabrics of extant primates (e.g., Cebus apella and Cercocebus albigena) that consume hard objects. The high proportion of scratches on Pr. afarensis molars suggests the inclusion of fine abrasives in or on the food items consumed by those individuals sampled in this study. Although Pr. afarensis may have been morphologically equipped to process hard, brittle items, the microwear data suggest that it did not necessarily do so, even in the face of varying environmental circumstances. Explanatory scenarios that describe Pr. afarensis as part of an evolutionary trajectory involving a more

Enamel surface topography analysis for diet discrimination. A methodology to enhance and select discriminative parameters

Science.gov (United States)

Francisco, Arthur; Blondel, Cécile; Brunetière, Noël; Ramdarshan, Anusha; Merceron, Gildas

2018-03-01

Tooth wear and, more specifically, dental microwear texture is a dietary proxy that has been used for years in vertebrate paleoecology and ecology. DMTA, dental microwear texture analysis, relies on a few parameters related to the surface complexity, anisotropy and heterogeneity of the enamel facets at the micrometric scale. Working with few but physically meaningful parameters helps in comparing published results and in defining levels for classification purposes. Other dental microwear approaches are based on ISO parameters and coupled with statistical tests to find the more relevant ones. The present study roughly utilizes most of the aforementioned parameters in their more or less modified form. But more than parameters, we here propose a new approach: instead of a single parameter characterizing the whole surface, we sample the surface and thus generate 9 derived parameters in order to broaden the parameter set. The identification of the most discriminative parameters is performed with an automated procedure which is an extended and refined version of the workflows encountered in some studies. The procedure in its initial form includes the most common tools, like the ANOVA and the correlation analysis, along with the required mathematical tests. The discrimination results show that a simplified form of the procedure is able to more efficiently identify the desired number of discriminative parameters. Also highlighted are some trends like the relevance of working with both height and spatial parameters, as well as the potential benefits of dimensionless surfaces. On a set of 45 surfaces issued from 45 specimens of three modern ruminants with differences in feeding preferences (grazing, leaf-browsing and fruit-eating), it is clearly shown that the level of wear discrimination is improved with the new methodology compared to the other ones.

The use of fan scrapers: Microwear evidence from Late Pottery Neolithic and Early Bronze Age, Ein Zippori, Israel

Directory of Open Access Journals (Sweden)

Richard W. Yerkes

2016-09-01

Full Text Available The results of a microwear analysis of samples of fan scrapers and fan scrapers spalls from late Pottery Neolithic (PN and Early Bronze Age (EBA occupation layers at Ein Zippori, Lower Galilee, Israel are presented. The goal of the microwear analysis was to determine the function of the fan scrapers and compare the visible usewear on the scrapers found in late PN and EBA lithic assemblages. The results indicate that during both periods most of the fan scrapers were used to skin and butcher animals, while some were also used for hide processing and bone working. The working edges of the fan scrapers had sharp, moderate, or steep edge-angles, and different edges were used for different tasks. Edges with microwear from scraping meat, bone, and hides (including some hides that may have been treated with abrasives had steep edge-angles, while there were moderate or sharp edge-angles on the edges of fan scrapers used for cutting. Two sub-types of fan scrapers were identified, flat cortex fan scrapers (FCFS, and cortical fan scrapers (CFS with convex dorsal faces. The CFS were abundant in PN contexts, while the FCFS were more common in EBA layers. However both of the sub-types had similar microwear traces.

Effects of surface treatments on the translucency, opalescence, and surface texture of dental monolithic zirconia ceramics.

Science.gov (United States)

Kim, Hee-Kyung; Kim, Sung-Hun; Lee, Jai-Bong; Ha, Seung-Ryong

2016-06-01

Surface polishing or glazing may increase the appearance of depth of monolithic zirconia restorations. The purpose of this in vitro study was to investigate the effects of surface treatments on the translucency, opalescence, and surface texture of dental monolithic zirconia ceramics. Forty-five monolithic zirconia specimens (16.3×16.4×2.0 mm) were divided into groups I to V, according to the number of colorings each received. Each group was then divided into 3 subgroups (n=3) according to the surface treatment: N=no treatment; P=polished; and G=glazed. CIElab color coordinates were obtained relative to D65 on a reflection spectrophotometer. The translucency parameter (TP) and opalescence parameter (OP) were calculated. One specimen per subgroups I and V was selected for evaluation of surface roughness (Ra) and was examined with scanning electron microscopy (SEM). Data were analyzed with 2-way ANOVA and pairwise comparisons (α=.05). Statistical powers were verified to evaluate results (α=.05). The interaction effects of surface treatments combined with the number of colorings were significant for TP, OP, and Ra (P.05), whereas glazing significantly decreased OP and Ra in most groups. SEM images demonstrated that surface treatments affected the surface texture of monolithic zirconia ceramics. Surface treatments combined with coloring strongly affect the surface texture of dental monolithic zirconia ceramics. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Surface texture measurement for dental wear applications

Science.gov (United States)

Austin, R. S.; Mullen, F.; Bartlett, D. W.

2015-06-01

The application of surface topography measurement and characterization within dental materials science is highly active and rapidly developing, in line with many modern industries. Surface measurement and structuring is used extensively within oral and dental science to optimize the optical, tribological and biological performance of natural and biomimetic dental materials. Although there has historically been little standardization in the use and reporting of surface metrology instrumentation and software, the dental industry is beginning to adopt modern areal measurement and characterization techniques, especially as the dental industry is increasingly adopting digital impressioning techniques in order to leverage CAD/CAM technologies for the design and construction of dental restorations. As dental treatment becomes increasingly digitized and reliant on advanced technologies such as dental implants, wider adoption of standardized surface topography and characterization techniques will become evermore essential. The dental research community welcomes the advances that are being made in surface topography measurement science towards realizing this ultimate goal.

Assessing change in diet and biological affinity between the 4th and 3rd millennia cal BCE in the Portuguese Estremadura: a preliminary dental comparison of Feteira II and Bolores.

Science.gov (United States)

Horwath, B C; Waterman, A J; Lillios, K T; Irish, J D

2014-04-01

Although the social and political changes accompanying the transition from the Neolithic through Copper Age, between the 4th and 3rd millennia cal BCE, in southwestern Iberia are reasonably well understood, much less is known about whether population movements and dietary changes accompanied these transformations. To address this question, human dental remains from the Middle through Late Neolithic site of Feteira II (3600-2900 cal BCE) and the Late Neolithic site of Bolores (2800-2600 cal BCE) in the Portuguese Estremadura were used to examine diet (microwear) and affinity (dental non-metrics). Microwear features were not found to be significantly different between Feteira II and Bolores, suggesting that the emergence of social complexity during this period did not result in large-scale changes in subsistence practices during the period of use at these sites. Using the Arizona State University Dental Anthropology System and supporting statistics, no significant difference between the samples from Feteira II and Bolores was observed, suggesting that no population replacement occurred between the Middle Neolithic and Late Neolithic/Copper Age. However, at Bolores there is some indication that there may have been demographic exchanges between southern Iberian and North African populations during the Late Neolithic/Copper Age. Copyright © 2013 Elsevier GmbH. All rights reserved.

A 2-year report on maxillary and mandibular fixed partial dentures supported by Astra Tech dental implants. A comparison of 2 implants with different surface textures

DEFF Research Database (Denmark)

Karlsson, U; Gotfredsen, K; Olsson, C

1998-01-01

In 50 partially edentulous patients, 133 (48 maxillary; 85 mandibular) Astra Tech dental implants of 2 different surface textures (machined; TiO-blasted) were alternately installed, supporting 52 fixed partial dentures (FPDs). Before abutment connection 2 machined implants (1 mandibular; 1...

Effect of dental tool surface texture and material on static friction with a wet gloved fingertip.

Science.gov (United States)

Laroche, Charles; Barr, Alan; Dong, Hui; Rempel, David

2007-01-01

Hand injuries are an important cause of pain and disability among dentists and dental hygienists and may be due to the high pinch forces involved in periodontal work. The pinch forces required to perform scaling may be reduced by increasing the friction between the tool and fingers. The purpose of this study was to determine whether modifying the tool material, surface texture, or glove type altered the coefficient of static friction for a wet gloved finger. Seven tools with varying surface topography were machined from 13 mm diameter stainless steel and Delrin and mounted to a 6-component force plate. The textures tested were a fine, medium and coarse diamond knurled pattern and a medium and fine annular pattern (concentric rings). Thirteen subjects pulled their gloved, wet thumb pad along the long axis of the tool while maintaining a normal force of 40 N. Latex and nitrile gloves were tested. The coefficient of static friction was calculated from the shear force history. The mean coefficients of static friction ranged from 0.20 to 0.65. The coefficient of static friction was higher for a smooth tool of Delrin than one of stainless steel. Differences in the coefficient of static friction were observed between the coarse and medium knurled patterns and the fine knurled and annular patterns. Coefficients of static friction were higher for the nitrile glove than the latex glove for tools with texture. These findings may be applied to the design of hand tools that require fine motor control with a wet, gloved hand.

Implications of diet for the extinction of saber-toothed cats and American lions.

Directory of Open Access Journals (Sweden)

Larisa R G Desantis

Full Text Available The saber-toothed cat, Smilodon fatalis, and American lion, Panthera atrox, were among the largest terrestrial carnivores that lived during the Pleistocene, going extinct along with other megafauna ∼12,000 years ago. Previous work suggests that times were difficult at La Brea (California during the late Pleistocene, as nearly all carnivores have greater incidences of tooth breakage (used to infer greater carcass utilization compared to today. As Dental Microwear Texture Analysis (DMTA can differentiate between levels of bone consumption in extant carnivores, we use DMTA to clarify the dietary niches of extinct carnivorans from La Brea. Specifically, we test the hypothesis that times were tough at La Brea with carnivorous taxa utilizing more of the carcasses. Our results show no evidence of bone crushing by P. atrox, with DMTA attributes most similar to the extant cheetah, Acinonyx jubatus, which actively avoids bone. In contrast, S. fatalis has DMTA attributes most similar to the African lion Panthera leo, implying that S. fatalis did not avoid bone to the extent previously suggested by SEM microwear data. DMTA characters most indicative of bone consumption (i.e., complexity and textural fill volume suggest that carcass utilization by the extinct carnivorans was not necessarily more complete during the Pleistocene at La Brea; thus, times may not have been "tougher" than the present. Additionally, minor to no significant differences in DMTA attributes from older (∼30-35 Ka to younger (∼11.5 Ka deposits offer little evidence that declining prey resources were a primary cause of extinction for these large cats.

New Neanderthal remains from Mani peninsula, Southern Greece: the Kalamakia Middle Paleolithic cave site.

Science.gov (United States)

Harvati, Katerina; Darlas, Andreas; Bailey, Shara E; Rein, Thomas R; El Zaatari, Sireen; Fiorenza, Luca; Kullmer, Ottmar; Psathi, Eleni

2013-06-01

The Kalamakia cave, a Middle Paleolithic site on the western coast of the Mani peninsula, Greece, was excavated in 1993-2006 by an interdisciplinary team from the Ephoreia of Paleoanthropology and Speleology (Greek Ministry of Culture) and the Muséum national d'Histoire naturelle (Paris). The site is dated to between ca. 100,000 and >39,000 years BP (Before Present) and has yielded Mousterian lithics, a rich fauna, and human remains from several layers. The latter include 10 isolated teeth, a cranial fragment and three postcranial elements. The remains represent at least eight individuals, two of them subadults, and show both carnivore and anthropogenic modifications. They can be identified as Neanderthal on the basis of diagnostic morphology on most specimens. A diet similar to that of Neanderthals from mixed habitat is suggested by our analysis of dental wear (occlusal fingerprint analysis) and microwear (occlusal texture microwear analysis), in agreement with the faunal and palynological analyses of the site. These new fossils significantly expand the Neanderthal sample known from Greece. Together with the human specimens from Lakonis and Apidima, the Kalamakia human remains add to the growing evidence of a strong Neanderthal presence in the Mani region during the Late Pleistocene. Copyright © 2013 Elsevier Ltd. All rights reserved.

Mechanical properties of ion-beam-textured surgical implant alloys

Science.gov (United States)

Weigand, A. J.

1977-01-01

An electron-bombardment Hg ion thruster was used as an ion source to texture surfaces of materials used to make orthopedic and/or dental prostheses or implants. The materials textured include 316 stainless steel, titanium-6% aluminum, 4% vanadium, and cobalt-20% chromium, 15% tungsten. To determine the effect of ion texturing on the ultimate strength and yield strength, stainless steel and Co-Cr-W alloy samples were tensile tested to failure. Three types of samples of both materials were tested. One type was ion-textured (the process also heats each sample to 300 C), another type was simply heated to 300 C in an oven, and the third type was untreated. Stress-strain diagrams, 0.2% offset yield strength data, total elongation data, and area reduction data are presented. Fatigue specimens of ion textured and untextured 316 stainless steel and Ti-6% Al-4% V were tested. Included as an ion textured sample is a Ti-6% Al-4% V sample which was ion machined by means of Ni screen mask so as to produce an array of 140 mu m x 140 mu m x 60 mu m deep pits. Scanning electron microscopy was used to characterize the ion textured surfaces.

Identification of pulpitis at dental X-ray periapical radiography based on edge detection, texture description and artificial neural networks

Directory of Open Access Journals (Sweden)

Bernard Y Tumbelaka

2014-01-01

Full Text Available Objectives: The aim of the present research was to identify pulpitis through periapical radiography by applying edges as basis image features, the texture description and the artificial neural networks (ANNs. Materials and Methods: Input image data records of 10 molar and 10 canine teeth were used. The clinical diagnosis of interest cases were represented as normal pulp, reversible and irreversible pulpitis, and necrotic pulp. The following image processing steps were done. First, the data records were converted digitally and preprocessed as its original image using the Gaussian Filter to obtain the best smoothed intensity distribution. Second, the local image differentiation was used to produce edge detector operators, e(x,y as the image gradient; ∇f(x,y providing useful information about the local intensity variations. Third, these results were analyzed by using the texture descriptors to obtain digitally the image entropy, H. The fourth step, all were characterized by the ANNs. Results: The edge detection carried important information about the object boundaries of pulpal health and pain conditions in the dental pulp significantly. The image entropy which was identified, the diagnostic term, was obtained from texture descriptors in the segmentation regions where the curves of pulp states tent convergence with the normal pulp line from 4.9014 to 4.6843 decreasing to the reversible and the irreversible pulpitis line include the nectrotic pulp line from 4.6812 to 4.5926 and then inputting to the ANNs analysis at the same of mean square error around 0.0003. Conclusions: Referred to these results, the correlation of the image entropy and the ANNs analysis could be linearly classified with the critical point of 4.6827. Finally, it could be concluded that the direct reading radiography is better to be digitized in order to provide us the best choice for diagnosis validation.

How could sympatric megaherbivores coexist? Example of niche partitioning within a proboscidean community from the Miocene of Europe

Science.gov (United States)

Calandra, Ivan; Göhlich, Ursula B.; Merceron, Gildas

2008-09-01

Although low in diversity, megaherbivores (mammals weighting over 103 kg) and especially proboscideans have a powerful impact on the structure and dynamics of present-day ecosystems. During the Neogene (23 to 2.6 Ma) of Europe, the diversity and geographic distribution of these megaherbivores was much greater. Nonetheless, their role in past ecosystems is unclear. Nutrition is one of the main bonds between organisms and their environment. Therefore, the ecology of organisms can be inferred from their dietary habits. The present study is aimed at characterizing the feeding habits of diverse megaherbivores through dental microwear analyses. This method was applied on cheek teeth of three sympatric species of proboscideans from the middle/late Miocene of the Molasse Basin in Southern Germany: Gomphotherium subtapiroideum, Gomphotherium steinheimense, and Deinotherium giganteum. The microwear signatures are significantly different between these taxa, suggesting differences in feeding habits and ecological niches within a woodland environment. D. giganteum probably browsed on dicotyledonous foliages whereas the two species of gomphotheres were neither strict grazers nor strict browsers and instead probably fed on a large spectrum of vegetal resources. The differences of occlusal molar morphology between the two gomphotheres are supported by the dental microwear pattern. Indeed, G. subtapiroideum probably ingested more abrasive material than G. steinheimense. Thus, our results suggest that these proboscideans did not compete for food resources.

Was Mesopithecus a seed eating colobine? Assessment of cracking, grinding and shearing ability using dental topography.

Science.gov (United States)

Thiery, Ghislain; Gillet, Geoffrey; Lazzari, Vincent; Merceron, Gildas; Guy, Franck

2017-11-01

Extant colobine monkeys have been historically described as specialized folivores. However, reports on both their behavior and dental metrics tend to ascribe a more varied diet to them. In particular, several species, such as Pygathrix nemaeus and Rhinopithecus roxellana, are dedicated seasonal seed eaters. They use the lophs on their postcanine teeth to crack open the hard endocarp that protects some seeds. This raises the question of whether the bilophodont occlusal pattern of colobine monkeys first evolved as an adaptation to folivory or sclerocarpic foraging. Here, we assess the sclerocarpic foraging ability of the oldest European fossil colobine monkey, Mesopithecus. We use computed microtomograpy to investigate the three-dimensional (3D) dental topography and enamel thickness of upper second molars ascribed to the late Miocene species Mesopithecus pentelicus from Pikermi, Greece. We compare M. pentelicus to a sample of extant Old World monkeys encompassing a wide range of diets. Furthermore, we combine classic dietary categories such as folivory with alternative categories that score the ability to crack, grind and shear mechanically challenging food. The 3D dental topography of M. pentelicus predicts an ability to crack and grind hard foods such as seeds. This is consistent with previous results obtained from dental microwear analysis. However, its relatively thin enamel groups M. pentelicus with other folivorous cercopithecids. We interpret this as a morphological trade-off between the necessity to avoid tooth failure resulting from hard food consumption and the need to process a high amount of leafy material. Our study demonstrates that categories evaluating the cracking, grinding or shearing ability, traditional dietary categories, and dental topography combine well to make a powerful tool for the investigation of diet in extant and extinct primates. Copyright © 2017 Elsevier Ltd. All rights reserved.

Potravní zdroje obyvatelstva mladší doby bronzové na Cezavách u Blučiny. Analýzy bioarcheologických pramenů

Czech Academy of Sciences Publication Activity Database

Salaš, M.; Jarošová, I.; Kočár, Petr; Nývltová Fišáková, Miriam; Roblíčková, M.

2012-01-01

Roč. 64, č. 3 (2012), s. 391-442 ISSN 0323-1267 Grant - others:GA ČR(CZ) GA404/09/0585 Institutional research plan: CEZ:AV0Z80020508; CEZ:AV0Z80010507 Institutional support: RVO:67985912 ; RVO:68081758 Keywords : Moravia * Late Bronze Age * dental microwear * archaeozoology * archaeobotany * isotope analysis Subject RIV: AC - Archeology, Anthropology, Ethnology

Computer Texture Mapping for Laser Texturing of Injection Mold

Directory of Open Access Journals (Sweden)

Yongquan Zhou

2014-04-01

Full Text Available Laser texturing is a relatively new multiprocess technique that has been used for machining 3D curved surfaces; it is more flexible and efficient to create decorative texture on 3D curved surfaces of injection molds so as to improve the surface quality and achieve cosmetic surface of molded plastic parts. In this paper, a novel method of laser texturing 3D curved surface based on 3-axis galvanometer scanning unit has been presented to prevent the texturing of injection mold surface from much distortion which is often caused by traditional texturing processes. The novel method has been based on the computer texture mapping technology which has been developed and presented. The developed texture mapping algorithm includes surface triangulation, notations, distortion measurement, control, and numerical method. An interface of computer texture mapping has been built to implement the algorithm of texture mapping approach to controlled distortion rate of 3D texture math model from 2D original texture applied to curvature surface. Through a case study of laser texturing of a high curvature surface of injection mold of a mice top case, it shows that the novel method of laser texturing meets the quality standard of laser texturing of injection mold.

Ion-beam texturing of uniaxially textured Ni films

International Nuclear Information System (INIS)

Park, S.J.; Norton, D.P.; Selvamanickam, Venkat

2005-01-01

The formation of biaxial texture in uniaxially textured Ni thin films via Ar-ion irradiation is reported. The ion-beam irradiation was not simultaneous with deposition. Instead, the ion beam irradiates the uniaxially textured film surface with no impinging deposition flux, which differs from conventional ion-beam-assisted deposition. The uniaxial texture is established via a nonion beam process, with the in-plane texture imposed on the uniaxial film via ion beam bombardment. Within this sequential ion beam texturing method, grain alignment is driven by selective etching and grain overgrowth

The functional and palaeoecological implications of tooth morphology and wear for the megaherbivorous dinosaurs from the Dinosaur Park Formation (upper Campanian of Alberta, Canada.

Directory of Open Access Journals (Sweden)

Jordan C Mallon

Full Text Available Megaherbivorous dinosaurs were exceptionally diverse on the Late Cretaceous island continent of Laramidia, and a growing body of evidence suggests that this diversity was facilitated by dietary niche partitioning. We test this hypothesis using the fossil megaherbivore assemblage from the Dinosaur Park Formation (upper Campanian of Alberta as a model. Comparative tooth morphology and wear, including the first use of quantitative dental microwear analysis in the context of Cretaceous palaeosynecology, are used to infer the mechanical properties of the foods these dinosaurs consumed. The phylliform teeth of ankylosaurs were poorly adapted for habitually processing high-fibre plant matter. Nevertheless, ankylosaur diets were likely more varied than traditionally assumed: the relatively large, bladed teeth of nodosaurids would have been better adapted to processing a tougher, more fibrous diet than the smaller, cusp-like teeth of ankylosaurids. Ankylosaur microwear is characterized by a preponderance of pits and scratches, akin to modern mixed feeders, but offers no support for interspecific dietary differences. The shearing tooth batteries of ceratopsids are much better adapted to high-fibre herbivory, attested by their scratch-dominated microwear signature. There is tentative microwear evidence to suggest differences in the feeding habits of centrosaurines and chasmosaurines, but statistical support is not significant. The tooth batteries of hadrosaurids were capable of both shearing and crushing functions, suggestive of a broad dietary range. Their microwear signal overlaps broadly with that of ankylosaurs, and suggests possible dietary differences between hadrosaurines and lambeosaurines. Tooth wear evidence further indicates that all forms considered here exhibited some degree of masticatory propaliny. Our findings reveal that tooth morphology and wear exhibit different, but complimentary, dietary signals that combine to support the hypothesis

The functional and palaeoecological implications of tooth morphology and wear for the megaherbivorous dinosaurs from the Dinosaur Park Formation (upper Campanian) of Alberta, Canada.

Science.gov (United States)

Mallon, Jordan C; Anderson, Jason S

2014-01-01

Megaherbivorous dinosaurs were exceptionally diverse on the Late Cretaceous island continent of Laramidia, and a growing body of evidence suggests that this diversity was facilitated by dietary niche partitioning. We test this hypothesis using the fossil megaherbivore assemblage from the Dinosaur Park Formation (upper Campanian) of Alberta as a model. Comparative tooth morphology and wear, including the first use of quantitative dental microwear analysis in the context of Cretaceous palaeosynecology, are used to infer the mechanical properties of the foods these dinosaurs consumed. The phylliform teeth of ankylosaurs were poorly adapted for habitually processing high-fibre plant matter. Nevertheless, ankylosaur diets were likely more varied than traditionally assumed: the relatively large, bladed teeth of nodosaurids would have been better adapted to processing a tougher, more fibrous diet than the smaller, cusp-like teeth of ankylosaurids. Ankylosaur microwear is characterized by a preponderance of pits and scratches, akin to modern mixed feeders, but offers no support for interspecific dietary differences. The shearing tooth batteries of ceratopsids are much better adapted to high-fibre herbivory, attested by their scratch-dominated microwear signature. There is tentative microwear evidence to suggest differences in the feeding habits of centrosaurines and chasmosaurines, but statistical support is not significant. The tooth batteries of hadrosaurids were capable of both shearing and crushing functions, suggestive of a broad dietary range. Their microwear signal overlaps broadly with that of ankylosaurs, and suggests possible dietary differences between hadrosaurines and lambeosaurines. Tooth wear evidence further indicates that all forms considered here exhibited some degree of masticatory propaliny. Our findings reveal that tooth morphology and wear exhibit different, but complimentary, dietary signals that combine to support the hypothesis of dietary niche

Oral health benefits of a daily dental chew in dogs.

Science.gov (United States)

Quest, Bradley W

2013-01-01

An independent study was conducted to determine and quantify the oral care benefits of a daily edible dental chew in dogs as measured by plaque and calculus control, gingival indices, and oral malodor. A "clean mouth" test model was used comparing a commercial dry diet and a commercial dry diet plus one dental chew per day. The dental chew tested was representative of a retail canine dental chew. The test dental chew was a green-colored dental dog chew with a flexible texture that can be readily chewed by dogs. They are made with a knuckle bone shape on one end and a toothbrush shape on the other end. Sixty adult dogs were allocated in either control or test groups based on plaque stratification and studied for 28-days. The test group (30 dogs) received a dry diet and 1 dental chew each day. The control group (30 dogs) received the same dry diet only. At the end of the study, measurements of plaque and calculus accumulation and evaluations of oral malodor and gingival heath were performed. Adding a dental chew to the diet resulted in statistically significant reductions in plaque and calculus accumulation, and oral malodor while improving gingival indices.

Analysis of dental root apical morphology: a new method for dietary reconstructions in primates.

Science.gov (United States)

Hamon, NoÉmie; Emonet, Edouard-Georges; Chaimanee, Yaowalak; Guy, Franck; Tafforeau, Paul; Jaeger, Jean-Jacques

2012-06-01

The reconstruction of paleo-diets is an important task in the study of fossil primates. Previously, paleo-diet reconstructions were performed using different methods based on extant primate models. In particular, dental microwear or isotopic analyses provided accurate reconstructions for some fossil primates. However, there is sometimes difficult or impossible to apply these methods to fossil material. Therefore, the development of new, independent methods of diet reconstructions is crucial to improve our knowledge of primates paleobiology and paleoecology. This study aims to investigate the correlation between tooth root apical morphology and diet in primates, and its potential for paleo-diet reconstructions. Dental roots are composed of two portions: the eruptive portion with a smooth and regular surface, and the apical penetrative portion which displays an irregular and corrugated surface. Here, the angle formed by these two portions (aPE), and the ratio of penetrative portion over total root length (PPI), are calculated for each mandibular tooth root. A strong correlation between these two variables and the proportion of some food types (fruits, leaves, seeds, animal matter, and vertebrates) in diet is found, allowing the use of tooth root apical morphology as a tool for dietary reconstructions in primates. The method was then applied to the fossil hominoid Khoratpithecus piriyai, from the Late Miocene of Thailand. The paleo-diet deduced from aPE and PPI is dominated by fruits (>50%), associated with animal matter (1-25%). Leaves, vertebrates and most probably seeds were excluded from the diet of Khoratpithecus, which is consistent with previous studies. Copyright © 2012 Wiley Periodicals, Inc.

LOCAL TEXTURE DESCRIPTION FRAMEWORK FOR TEXTURE BASED FACE RECOGNITION

Directory of Open Access Journals (Sweden)

R. Reena Rose

2014-02-01

Full Text Available Texture descriptors have an important role in recognizing face images. However, almost all the existing local texture descriptors use nearest neighbors to encode a texture pattern around a pixel. But in face images, most of the pixels have similar characteristics with that of its nearest neighbors because the skin covers large area in a face and the skin tone at neighboring regions are same. Therefore this paper presents a general framework called Local Texture Description Framework that uses only eight pixels which are at certain distance apart either circular or elliptical from the referenced pixel. Local texture description can be done using the foundation of any existing local texture descriptors. In this paper, the performance of the proposed framework is verified with three existing local texture descriptors Local Binary Pattern (LBP, Local Texture Pattern (LTP and Local Tetra Patterns (LTrPs for the five issues viz. facial expression, partial occlusion, illumination variation, pose variation and general recognition. Five benchmark databases JAFFE, Essex, Indian faces, AT&T and Georgia Tech are used for the experiments. Experimental results demonstrate that even with less number of patterns, the proposed framework could achieve higher recognition accuracy than that of their base models.

Femtosecond laser surface texturing of titanium as a method to reduce the adhesion of Staphylococcus aureus and biofilm formation

Energy Technology Data Exchange (ETDEWEB)

Cunha, Alexandre [Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais 1, 1049-001 Lisboa (Portugal); Bordeaux University, Institute of Chemistry & Biology of Membranes & Nanoobjects (CBMN UMR 5248, CNRS), European Institute of Chemistry and Biology, 2 Rue Robert Escarpit, 33607 Pessac (France); Elie, Anne-Marie [Bordeaux University, CBMN UMR 5248, CNRS, Bordeaux Science Agro, 1 Rue du G. de Gaulle, 33170 Gradignan (France); Plawinski, Laurent [Bordeaux University, Institute of Chemistry & Biology of Membranes & Nanoobjects (CBMN UMR 5248, CNRS), European Institute of Chemistry and Biology, 2 Rue Robert Escarpit, 33607 Pessac (France); Serro, Ana Paula [Instituto Superior Técnico, Universidade de Lisboa, CQE-Centro de Química Estrutural, Av. Rovisco Pais 1, 1049-001 Lisbon (Portugal); Botelho do Rego, Ana Maria [Instituto Superior Técnico, Universidade de Lisboa, CQFM-Centro de Química-Física Molecular and Institute of Nanoscience and Nanotechnology - IN, Av. Rovisco Pais 1, 1049-001 Lisbon (Portugal); Almeida, Amélia [Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais 1, 1049-001 Lisboa (Portugal); Urdaci, Maria C. [Bordeaux University, CBMN UMR 5248, CNRS, Bordeaux Science Agro, 1 Rue du G. de Gaulle, 33170 Gradignan (France); Durrieu, Marie-Christine [Bordeaux University, Institute of Chemistry & Biology of Membranes & Nanoobjects (CBMN UMR 5248, CNRS), European Institute of Chemistry and Biology, 2 Rue Robert Escarpit, 33607 Pessac (France); Vilar, Rui, E-mail: rui.vilar@tecnico.ulisboa.pt [Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais 1, 1049-001 Lisboa (Portugal)

2016-01-01

Graphical abstract: - Highlights: • The short-term adhesion of Staphylococcus aureus onto femtosecond laser textured surfaces of titanium was investigated. • The laser textured surfaces consist of laser-induced periodic surface structures (LIPSS) and nanopillars. • The laser treatment enhances the hydrophilicity and the surface free energy of the material. • The laser treatment reduces significantly the adhesion of S. aureus and biofilm formation. • Femtosecond laser surface texturing of titanium is a simple and promising method for endowing dental and orthopedic implants with antibacterial properties. - Abstract: The aim of the present work was to investigate the possibility of using femtosecond laser surface texturing as a method to reduce the colonization of Grade 2 Titanium alloy surfaces by Staphylococcus aureus and the subsequent formation of biofilm. The laser treatments were carried out with a Yb:KYW chirped-pulse-regenerative amplification laser system with a central wavelength of 1030 nm and a pulse duration of 500 fs. Two types of surface textures, consisting of laser-induced periodic surface structures (LIPSS) and nanopillars, were produced. The topography, chemical composition and phase constitution of these surfaces were investigated by atomic force microscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, micro-Raman spectroscopy, and X-ray diffraction. Surface wettability was assessed by the sessile drop method using water and diiodomethane as testing liquids. The response of S. aureus put into contact with the laser treated surfaces in controlled conditions was investigated by epifluorescence microscopy and scanning electron microscopy 48 h after cell seeding. The results achieved show that the laser treatment reduces significantly the bacterial adhesion to the surface as well as biofilm formation as compared to a reference polished surfaces and suggest that femtosecond laser texturing is a simple and promising method

Ion beam texturing

Science.gov (United States)

Hudson, W. R.

1977-01-01

A microscopic surface texture was created by sputter-etching a surface while simultaneously sputter-depositing a lower sputter yield material onto the surface. A xenon ion-beam source was used to perform the texturing process on samples as large as 3-cm diameter. Textured surfaces have been characterized with SEM photomicrographs for a large number of materials including Cu, Al, Si, Ti, Ni, Fe, stainless steel, Au, and Ag. A number of texturing parameters are studied including the variation of texture with ion-beam powder, surface temperature, and the rate of texture growth with sputter etching time.

The brass-type texture and its deviation from the copper-type texture

DEFF Research Database (Denmark)

Leffers, Torben; Ray, R.K.

2009-01-01

Our basic aim with the present review is to address the classical problem of the “fcc rolling texture transition” – the fact that fcc materials may, depending on material parameters and rolling conditions, develop two different types of rolling textures, the copper-type texture and the brass...... the subject and sketch our approach for dealing with it. We then recapitulate the decisive progress made during the nineteen sixties in the empirical description of the fcc rolling texture transition and in lining up a number of possible explanations. Then follows a section about experimental investigations...... of the brass-type texture after the nineteen sixties covering texture measurements and microstructural investigations. The main observations are: (1) The brass-type texture deviates from the copper-type texture from an early stage of texture development. (2) Deformation twinning has a decisive effect...

Evaluation of the effect of initial texture on the development of deformation texture

DEFF Research Database (Denmark)

Leffers, Torben; Juul Jensen, Dorte

1986-01-01

The authors describe a computer procedure which allows them to introduce experimental initial textures as starting conditions for texture simulation (instead of a theoretical random texture). They apply the procedure on two batches of copper with weak initial textures and on fine-grained and coarse......-grained aluminium with moderately strong initial textures. In copper the initial texture turns out to be too weak to have any significant effect. In aluminium the initial texture has a very significant effect on the simulated textures-similar to the effect it has on the experimental textures. However......, there are differences between the simulated and the experimental aluminium textures that can only be explained as a grain-size effect. Possible future applications of the procedure are discussed...

Combining fine texture and coarse color features for color texture classification

Science.gov (United States)

Wang, Junmin; Fan, Yangyu; Li, Ning

2017-11-01

Color texture classification plays an important role in computer vision applications because texture and color are two fundamental visual features. To classify the color texture via extracting discriminative color texture features in real time, we present an approach of combining the fine texture and coarse color features for color texture classification. First, the input image is transformed from RGB to HSV color space to separate texture and color information. Second, the scale-selective completed local binary count (CLBC) algorithm is introduced to extract the fine texture feature from the V component in HSV color space. Third, both H and S components are quantized at an optimal coarse level. Furthermore, the joint histogram of H and S components is calculated, which is considered as the coarse color feature. Finally, the fine texture and coarse color features are combined as the final descriptor and the nearest subspace classifier is used for classification. Experimental results on CUReT, KTH-TIPS, and New-BarkTex databases demonstrate that the proposed method achieves state-of-the-art classification performance. Moreover, the proposed method is fast enough for real-time applications.

Effect of Macrogeometry on the Surface Topography of Dental Implants.

Science.gov (United States)

Naves, Marina Melo; Menezes, Helder Henrique Machado; Magalhães, Denildo; Ferreira, Jessica Afonso; Ribeiro, Sara Ferreira; de Mello, José Daniel Biasoli; Costa, Henara Lillian

2015-01-01

Because the microtopography of titanium implants influences the biomaterial-tissue interaction, surface microtexturing treatments are frequently used for dental implants. However, surface treatment alone may not determine the final microtopography of a dental implant, which can also be influenced by the implant macrogeometry. This work analyzed the effects on surface roughness parameters of the same treatment applied by the same manufacturer to implants with differing macro-designs. Three groups of titanium implants with different macro-designs were investigated using laser interferometry and scanning electron microscopy. Relevant surface roughness parameters were calculated for different regions of each implant. Two flat disks (treated and untreated) were also investigated for comparison. The tops of the threads and the nonthreaded regions of all implants had very similar roughness parameters, independent of the geometry of the implant, which were also very similar to those of flat disks treated with the same process. In contrast, the flanks and valleys of the threads presented larger irregularities (Sa) with higher slopes (Sdq) and larger developed surface areas (Sdr) on all implants, particularly for implants with threads with smaller heights. The flanks and valleys displayed stronger textures (Str), particularly on the implants with threads with larger internal angles. Parameters associated with the height of the irregularities (Sa), the slope of the asperities (Sdq), the presence of a surface texture (Str), and the developed surface area of the irregularities (Sdr) were significantly affected by the macrogeometry of the implants. Flat disks subjected to the same surface treatment as dental implants reproduced only the surface topography of the flat regions of the implants.

Preliminary fabrication and characterization of electron beam melted Ti–6Al–4V customized dental implant

Directory of Open Access Journals (Sweden)

Ravikumar Ramakrishnaiah

2017-05-01

Full Text Available The current study was aimed to fabricate customized root form dental implant using additive manufacturing technique for the replacement of missing teeth. The root form dental implant was designed using Geomagic™ and Magics™, the designed implant was directly manufactured by layering technique using ARCAM A2™ electron beam melting system by employing medical grade Ti–6Al–4V alloy powder. Furthermore, the fabricated implant was characterized in terms of certain clinically important parameters such as surface microstructure, surface topography, chemical purity and internal porosity. Results confirmed that, fabrication of customized dental implants using additive rapid manufacturing technology offers an attractive method to produce extremely pure form of customized titanium dental implants, the rough and porous surface texture obtained is expected to provide better initial implant stabilization and superior osseointegration.

TEXTURAL FRACTOGRAPHY

Directory of Open Access Journals (Sweden)

Hynek Lauschmann

2011-05-01

Full Text Available The reconstitution of the history of a fatigue process is based on the knowledge of any correspondences between the morphology of the crack surface and the velocity of the crack growth (crack growth rate - CGR. The textural fractography is oriented to mezoscopic SEM magnifications (30 to 500x. Images contain complicated textures without distinct borders. The aim is to find any characteristics of this texture, which correlate with CGR. Pre-processing of images is necessary to obtain a homogeneous texture. Three methods of textural analysis have been developed and realized as computational programs: the method based on the spectral structure of the image, the method based on a Gibbs random field (GRF model, and the method based on the idealization of light objects into a fibre process. In order to extract and analyze the fibre process, special methods - tracing fibres and a database-oriented analysis of a fibre process - have been developed.

Neanderthal teeth from Moula-Guercy, Ardèche, France.

Science.gov (United States)

Hlusko, Leslea J; Carlson, Joshua P; Guatelli-Steinberg, Debbie; Krueger, Kristin L; Mersey, Ben; Ungar, Peter S; Defleur, Alban

2013-07-01

Here we describe dental remains from a Neanderthal fossil assemblage from Moula-Guercy, France. Our report demonstrates that the Moula-Guercy hominid remains contribute important morphological, developmental, and behavioral data to understanding Neanderthal evolutionary history. We include gross comparative morphological descriptions and enamel surface microstructure and microwear data. These teeth reveal numerous characteristics that are diagnostic of Neanderthals and provide no evidence for the presence of any other hominid taxa. Enamel growth increment data from the Moula-Guercy specimens yield evidence of a Neanderthal pattern of development, although at the lower end of the range of variation. The presence of a significant number of linear enamel hypoplasias indicates that these individuals were stressed during childhood. Molar microwear data suggest that these Neanderthals did not differ significantly from modern humans in terms of the fracture properties of the food they were consuming. The incisor microwear and macro striations provide evidence that these individuals may have been using their anterior teeth as tools, similar to the practices of several modern human populations such as the Inuit, Ipiutak, and Australian Aboriginals, and reminiscent of evidence from other Neanderthals from Krapina, Croatia, as well as the 600,000 year old hominids from Sima de los Huesos, Spain. Am J Phys Anthropol 151:477-491, 2013.© 2013 Wiley Periodicals, Inc. Copyright ©2013 Wiley Periodicals, Inc.

‘Do larger molars and robust jaws in early hominins represent dietary adaptation?’ A New Study in Tooth Wear

Directory of Open Access Journals (Sweden)

Anna Frances Clement

2013-10-01

Full Text Available Diet imposes significant constraints on the biology and behaviour of animals. The fossil record suggests that key changes in diet have taken place throughout the course of human evolution. Defining these changes enables us to understand the behaviour of our extinct fossil ancestors. Several lines of evidence are available for studying the diet of early hominins, including craniodental morphology, palaeoecology, dental microwear and stable isotopes. They do, however, often provide conflicting results. Using dental macrowear analysis, this new UCL Institute of Archaeology project will provide an alternative source of information on early hominin diet. Dental macrowear has often been used to analyse diet in archaeological populations, but this will be the first time that this type of detailed study has been applied to the early hominin fossil record.

Teasing apart the contributions of hard dietary items on 3D dental microtextures in primates.

Science.gov (United States)

Calandra, Ivan; Schulz, Ellen; Pinnow, Mona; Krohn, Susanne; Kaiser, Thomas M

2012-07-01

3D dental microtexture analysis is a powerful tool for reconstructing the diets of extinct primates. This method is based on the comparison of fossils with extant species of known diet. The diets of primates are highly diversified and include fruits, seeds, grass, tree leaves, bark, roots, tubers, and animal resources. Fruits remain the main component in the diets of most primates. We tested whether the proportion of fruit consumed is correlated with dental microtexture. Two methods of microtexture analysis, the scale-sensitive fractal analysis (SSFA) and the Dental Areal Surface Texture Analysis (DASTA; after ISO/FDIS 25178-2), were applied to specimens of eight primate species (Alouatta seniculus, Gorilla gorilla, Lophocebus albigena, Macaca fascicularis, Pan troglodytes, Papio cynocephalus, Pongo abelii, Theropithecus gelada). These species largely differ in the mean annual proportion of fruit (from 0 to 90%) in their diet, as well as in their consumption of other hard items (seeds, bark, and insect cuticles) and of abrasive plants. We find the complexity and heterogeneity of textures (SSFA) to correlate with the proportion of fruits consumed. Textural fill volume (SSFA) indicates the proportion of both fruits and other hard items processed. Furthermore, anisotropy (SSFA) relates to the consumption of abrasive plants like grass and other monocots. ISO parameters valley height, root mean square height, material volume, density of peaks, and closed hill and dale areas (DASTA) describe the functional interaction between food items and enamel facets during mastication. The shallow, plastic deformation of enamel surfaces induced by small hard particles, such as phytoliths or dust, results in flat microtexture relief, whereas the brittle, deep fracture caused by large hard items such as hard seeds creates larger relief. Copyright © 2012 Elsevier Ltd. All rights reserved.

Symmetric textures

International Nuclear Information System (INIS)

Ramond, P.

1993-01-01

The Wolfenstein parametrization is extended to the quark masses in the deep ultraviolet, and an algorithm to derive symmetric textures which are compatible with existing data is developed. It is found that there are only five such textures

Semantic attributes based texture generation

Science.gov (United States)

Chi, Huifang; Gan, Yanhai; Qi, Lin; Dong, Junyu; Madessa, Amanuel Hirpa

2018-04-01

Semantic attributes are commonly used for texture description. They can be used to describe the information of a texture, such as patterns, textons, distributions, brightness, and so on. Generally speaking, semantic attributes are more concrete descriptors than perceptual features. Therefore, it is practical to generate texture images from semantic attributes. In this paper, we propose to generate high-quality texture images from semantic attributes. Over the last two decades, several works have been done on texture synthesis and generation. Most of them focusing on example-based texture synthesis and procedural texture generation. Semantic attributes based texture generation still deserves more devotion. Gan et al. proposed a useful joint model for perception driven texture generation. However, perceptual features are nonobjective spatial statistics used by humans to distinguish different textures in pre-attentive situations. To give more describing information about texture appearance, semantic attributes which are more in line with human description habits are desired. In this paper, we use sigmoid cross entropy loss in an auxiliary model to provide enough information for a generator. Consequently, the discriminator is released from the relatively intractable mission of figuring out the joint distribution of condition vectors and samples. To demonstrate the validity of our method, we compare our method to Gan et al.'s method on generating textures by designing experiments on PTD and DTD. All experimental results show that our model can generate textures from semantic attributes.

Education About Dental Hygienists' Roles in Public Dental Prevention Programs: Dental and Dental Hygiene Students' and Faculty Members' and Dental Hygienists' Perspectives.

Science.gov (United States)

Pervez, Anushey; Kinney, Janet S; Gwozdek, Anne; Farrell, Christine M; Inglehart, Marita R

2016-09-01

In 2005, Public Act No. 161 (PA 161) was passed in Michigan, allowing dental hygienists to practice in approved public dental prevention programs to provide services for underserved populations while utilizing a collaborative agreement with a supervising dentist. The aims of this study were to assess how well dental and dental hygiene students and faculty members and practicing dental hygienists have been educated about PA 161, what attitudes and knowledge about the act they have, and how interested they are in additional education about it. University of Michigan dental and dental hygiene students and faculty members, students in other Michigan dental hygiene programs, and dental hygienists in the state were surveyed. Respondents (response rate) were 160 dental students (50%), 63 dental hygiene students (82%), 30 dental faculty members (26%), and 12 dental hygiene faculty members (52%) at the University of Michigan; 143 dental hygiene students in other programs (20%); and 95 members of the Michigan Dental Hygienists' Association (10%). The results showed that the dental students were less educated about PA 161 than the dental hygiene students, and the dental faculty members were less informed than the dental hygiene faculty members and dental hygienists. Responding dental hygiene faculty members and dental hygienists had more positive attitudes about PA 161 than did the students and dental faculty members. Most of the dental hygiene faculty members and dental hygienists knew a person providing services in a PA 161 program. Most dental hygiene students, faculty members, and dental hygienists wanted more education about PA 161. Overall, the better educated about the program the respondents were, the more positive their attitudes, and the more interested they were in learning more.

Aesthetic Perception of Visual Textures: A Holistic Exploration using Texture Analysis, Psychological Experiment and Perception Modeling

Directory of Open Access Journals (Sweden)

Jianli eLiu

2015-11-01

Full Text Available Modeling human aesthetic perception of visual textures is important and valuable in numerous industrial domains, such as product design, architectural design and decoration. Based on results from a semantic differential rating experiment, we modeled the relationship between low-level basic texture features and aesthetic properties involved in human aesthetic texture perception. First, we compute basic texture features from textural images using four classical methods. These features are neutral, objective and independent of the socio-cultural context of the visual textures. Then, we conduct a semantic differential rating experiment to collect from evaluators their aesthetic perceptions of selected textural stimuli. In semantic differential rating experiment, eights pairs of aesthetic properties are chosen, which are strongly related to the socio-cultural context of the selected textures and to human emotions. They are easily understood and connected to everyday life. We propose a hierarchical feed-forward layer model of aesthetic texture perception and assign 8 pairs of aesthetic properties to different layers. Finally, we describe the generation of multiple linear and nonlinear regression models for aesthetic prediction by taking dimensionality-reduced texture features and aesthetic properties of visual textures as dependent and independent variables, respectively. Our experimental results indicate that the relationships between each layer and its neighbors in the hierarchical feed-forward layer model of aesthetic texture perception can be fitted well by linear functions, and the models thus generated can successfully bridge the gap between computational texture features and aesthetic texture properties.

[Visual Texture Agnosia in Humans].

Science.gov (United States)

Suzuki, Kyoko

2015-06-01

Visual object recognition requires the processing of both geometric and surface properties. Patients with occipital lesions may have visual agnosia, which is impairment in the recognition and identification of visually presented objects primarily through their geometric features. An analogous condition involving the failure to recognize an object by its texture may exist, which can be called visual texture agnosia. Here we present two cases with visual texture agnosia. Case 1 had left homonymous hemianopia and right upper quadrantanopia, along with achromatopsia, prosopagnosia, and texture agnosia, because of damage to his left ventromedial occipitotemporal cortex and right lateral occipito-temporo-parietal cortex due to multiple cerebral embolisms. Although he showed difficulty matching and naming textures of real materials, he could readily name visually presented objects by their contours. Case 2 had right lower quadrantanopia, along with impairment in stereopsis and recognition of texture in 2D images, because of subcortical hemorrhage in the left occipitotemporal region. He failed to recognize shapes based on texture information, whereas shape recognition based on contours was well preserved. Our findings, along with those of three reported cases with texture agnosia, indicate that there are separate channels for processing texture, color, and geometric features, and that the regions around the left collateral sulcus are crucial for texture processing.

Parallel-Sequential Texture Analysis

NARCIS (Netherlands)

van den Broek, Egon; Singh, Sameer; Singh, Maneesha; van Rikxoort, Eva M.; Apte, Chid; Perner, Petra

2005-01-01

Color induced texture analysis is explored, using two texture analysis techniques: the co-occurrence matrix and the color correlogram as well as color histograms. Several quantization schemes for six color spaces and the human-based 11 color quantization scheme have been applied. The VisTex texture

Feature-aware natural texture synthesis

KAUST Repository

Wu, Fuzhang

2014-12-04

This article presents a framework for natural texture synthesis and processing. This framework is motivated by the observation that given examples captured in natural scene, texture synthesis addresses a critical problem, namely, that synthesis quality can be affected adversely if the texture elements in an example display spatially varied patterns, such as perspective distortion, the composition of different sub-textures, and variations in global color pattern as a result of complex illumination. This issue is common in natural textures and is a fundamental challenge for previously developed methods. Thus, we address it from a feature point of view and propose a feature-aware approach to synthesize natural textures. The synthesis process is guided by a feature map that represents the visual characteristics of the input texture. Moreover, we present a novel adaptive initialization algorithm that can effectively avoid the repeat and verbatim copying artifacts. Our approach improves texture synthesis in many images that cannot be handled effectively with traditional technologies.

FCC Rolling Textures Reviewed in the Light of Quantitative Comparisons between Simulated and Experimental Textures

DEFF Research Database (Denmark)

Wierzbanowski, Krzysztof; Wroński, Marcin; Leffers, Torben

2014-01-01

The crystallographic texture of metallic materials has a very strong effect on the properties of the materials. In the present article, we look at the rolling textures of fcc metals and alloys, where the classical problem is the existence of two different types of texture, the "copper-type texture......" and the "brass-type texture." The type of texture developed is determined by the stacking fault energy of the material, the rolling temperature and the strain rate of the rolling process. Recent texture simulations by the present authors provide the basis for a renewed discussion of the whole field of fcc......} slip without or with deformation twinning, but we also consider slip on other slip planes and slip by partial dislocations. We consistently make quantitative comparison of the simulation results and the experimental textures by means of a scalar correlation factor. We find that the development...

Dental Calculus Arrest of Dental Caries.

Science.gov (United States)

Keyes, Paul H; Rams, Thomas E

An inverse relationship between dental calculus mineralization and dental caries demineralization on teeth has been noted in some studies. Dental calculus may even form superficial layers over existing dental caries and arrest their progression, but this phenomenon has been only rarely documented and infrequently considered in the field of Cariology. To further assess the occurrence of dental calculus arrest of dental caries, this study evaluated a large number of extracted human teeth for the presence and location of dental caries, dental calculus, and dental plaque biofilms. A total of 1,200 teeth were preserved in 10% buffered formal saline, and viewed while moist by a single experienced examiner using a research stereomicroscope at 15-25× magnification. Representative teeth were sectioned and photographed, and their dental plaque biofilms subjected to gram-stain examination with light microscopy at 100× magnification. Dental calculus was observed on 1,140 (95%) of the extracted human teeth, and no dental carious lesions were found underlying dental calculus-covered surfaces on 1,139 of these teeth. However, dental calculus arrest of dental caries was found on one (0.54%) of 187 evaluated teeth that presented with unrestored proximal enamel caries. On the distal surface of a maxillary premolar tooth, dental calculus mineralization filled the outer surface cavitation of an incipient dental caries lesion. The dental calculus-covered carious lesion extended only slightly into enamel, and exhibited a brown pigmentation characteristic of inactive or arrested dental caries. In contrast, the tooth's mesial surface, without a superficial layer of dental calculus, had a large carious lesion going through enamel and deep into dentin. These observations further document the potential protective effects of dental calculus mineralization against dental caries.

Dental Calculus Arrest of Dental Caries

Science.gov (United States)

Keyes, Paul H.; Rams, Thomas E.

2016-01-01

Background An inverse relationship between dental calculus mineralization and dental caries demineralization on teeth has been noted in some studies. Dental calculus may even form superficial layers over existing dental caries and arrest their progression, but this phenomenon has been only rarely documented and infrequently considered in the field of Cariology. To further assess the occurrence of dental calculus arrest of dental caries, this study evaluated a large number of extracted human teeth for the presence and location of dental caries, dental calculus, and dental plaque biofilms. Materials and methods A total of 1,200 teeth were preserved in 10% buffered formal saline, and viewed while moist by a single experienced examiner using a research stereomicroscope at 15-25× magnification. Representative teeth were sectioned and photographed, and their dental plaque biofilms subjected to gram-stain examination with light microscopy at 100× magnification. Results Dental calculus was observed on 1,140 (95%) of the extracted human teeth, and no dental carious lesions were found underlying dental calculus-covered surfaces on 1,139 of these teeth. However, dental calculus arrest of dental caries was found on one (0.54%) of 187 evaluated teeth that presented with unrestored proximal enamel caries. On the distal surface of a maxillary premolar tooth, dental calculus mineralization filled the outer surface cavitation of an incipient dental caries lesion. The dental calculus-covered carious lesion extended only slightly into enamel, and exhibited a brown pigmentation characteristic of inactive or arrested dental caries. In contrast, the tooth's mesial surface, without a superficial layer of dental calculus, had a large carious lesion going through enamel and deep into dentin. Conclusions These observations further document the potential protective effects of dental calculus mineralization against dental caries. PMID:27446993

Seismic texture classification. Final report

Energy Technology Data Exchange (ETDEWEB)

Vinther, R.

1997-12-31

The seismic texture classification method, is a seismic attribute that can both recognize the general reflectivity styles and locate variations from these. The seismic texture classification performs a statistic analysis for the seismic section (or volume) aiming at describing the reflectivity. Based on a set of reference reflectivities the seismic textures are classified. The result of the seismic texture classification is a display of seismic texture categories showing both the styles of reflectivity from the reference set and interpolations and extrapolations from these. The display is interpreted as statistical variations in the seismic data. The seismic texture classification is applied to seismic sections and volumes from the Danish North Sea representing both horizontal stratifications and salt diapers. The attribute succeeded in recognizing both general structure of successions and variations from these. Also, the seismic texture classification is not only able to display variations in prospective areas (1-7 sec. TWT) but can also be applied to deep seismic sections. The seismic texture classification is tested on a deep reflection seismic section (13-18 sec. TWT) from the Baltic Sea. Applied to this section the seismic texture classification succeeded in locating the Moho, which could not be located using conventional interpretation tools. The seismic texture classification is a seismic attribute which can display general reflectivity styles and deviations from these and enhance variations not found by conventional interpretation tools. (LN)

Methods of making textured catalysts

Science.gov (United States)

Werpy, Todd [West Richland, WA; Frye, Jr., John G.; Wang, Yong [Richland, WA; Zacher, Alan H [Kennewick, WA

2010-08-17

A textured catalyst having a hydrothermally-stable support, a metal oxide and a catalyst component is described. Methods of conducting aqueous phase reactions that are catalyzed by a textured catalyst are also described. The invention also provides methods of making textured catalysts and methods of making chemical products using a textured catalyst.

Dilatometry study of textures

International Nuclear Information System (INIS)

Sofrenovic, R.; Lazarevic, Dj.

1965-01-01

Presence of textures in the metal uranium fuel is harmful because of anisotropy properties of uranium during thermal treatment, and especially during irradiation. Anisotropic radiation swelling of uranium can cause deformation of fuel element due to existence of textures. The objective of this work was studying of the influence of phase transformations on textures in uranium which has undergone plastic deformation due to rotational casting. Dilatometry method was adopted for testing the textures. This report describes the device for dilatometry testing and the measured preliminary results are shown

Micro-Texture Synthesis by Phase Randomization

Directory of Open Access Journals (Sweden)

Bruno Galerne

2011-09-01

Full Text Available This contribution is concerned with texture synthesis by example, the process of generating new texture images from a given sample. The Random Phase Noise algorithm presented here synthesizes a texture from an original image by simply randomizing its Fourier phase. It is able to reproduce textures which are characterized by their Fourier modulus, namely the random phase textures (or micro-textures.

A new testing protocol for zirconia dental implants.

Science.gov (United States)

Sanon, Clarisse; Chevalier, Jérôme; Douillard, Thierry; Cattani-Lorente, Maria; Scherrer, Susanne S; Gremillard, Laurent

2015-01-01

Based on the current lack of standards concerning zirconia dental implants, we aim at developing a protocol to validate their functionality and safety prior their clinical use. The protocol is designed to account for the specific brittle nature of ceramics and the specific behavior of zirconia in terms of phase transformation. Several types of zirconia dental implants with different surface textures (porous, alveolar, rough) were assessed. The implants were first characterized in their as-received state by Scanning Electron Microscopy (SEM), Focused Ion Beam (FIB), X-Ray Diffraction (XRD). Fracture tests following a method adapted from ISO 14801 were conducted to evaluate their initial mechanical properties. Accelerated aging was performed on the implants, and XRD monoclinic content measured directly at their surface instead of using polished samples as in ISO 13356. The implants were then characterized again after aging. Implants with an alveolar surface presented large defects. The protocol shows that such defects compromise the long-term mechanical properties. Implants with a porous surface exhibited sufficient strength but a significant sensitivity to aging. Even if associated to micro cracking clearly observed by FIB, aging did not decrease mechanical strength of the implants. As each dental implant company has its own process, all zirconia implants may behave differently, even if the starting powder is the same. Especially, surface modifications have a large influence on strength and aging resistance, which is not taken into account by the current standards. Protocols adapted from this work could be useful. Copyright © 2014 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Height perception influenced by texture gradient.

Science.gov (United States)

Tozawa, Junko

2012-01-01

Three experiments were carried out to examine whether a texture gradient influences perception of relative object height. Previous research implicated texture cues in judgments of object width, but similar influences have not been demonstrated for relative height. In this study, I evaluate a hypothesis that the projective ratio of the number of texture elements covered by the objects combined with the ratio of the retinal object heights determines percepts of relative object height. Density of texture background was varied: four density conditions ranged from no-texture to very dense texture. In experiments 1 and 2, participants judged the height of comparison bar compared to the standard bar positioned on no-texture or textured backgrounds. Results showed relative height judgments differed with texture manipulations, consistent with predictions from a hypothesised combination of the number of texture elements with retinal height (experiment 1), or partially consistent with this hypothesis (experiment 2). In experiment 2, variations in the position of a comparison object showed that comparisons located far from the horizon were judged more poorly than in other positions. In experiment 3 I examined distance perception; relative distance judgments were found to be also affected by textured backgrounds. Results are discussed in terms of Gibson's relational theory and distance calibration theory.

Texture memory and strain-texture mapping in a NiTi shape memory alloy

International Nuclear Information System (INIS)

Ye, B.; Majumdar, B. S.; Dutta, I.

2007-01-01

The authors report on the near-reversible strain hysteresis during thermal cycling of a polycrystalline NiTi shape memory alloy at a constant stress that is below the yield strength of the martensite. In situ neutron diffraction experiments are used to demonstrate that the strain hysteresis occurs due to a texture memory effect, where the martensite develops a texture when it is cooled under load from the austenite phase and is thereafter ''remembered.'' Further, the authors quantitatively relate the texture to the strain by developing a calculated strain-texture map or pole figure for the martensite phase, and indicate its applicability in other martensitic transformations

Viewpoints: diet and dietary adaptations in early hominins: the hard food perspective.

Science.gov (United States)

Strait, David S; Constantino, Paul; Lucas, Peter W; Richmond, Brian G; Spencer, Mark A; Dechow, Paul C; Ross, Callum F; Grosse, Ian R; Wright, Barth W; Wood, Bernard A; Weber, Gerhard W; Wang, Qian; Byron, Craig; Slice, Dennis E; Chalk, Janine; Smith, Amanda L; Smith, Leslie C; Wood, Sarah; Berthaume, Michael; Benazzi, Stefano; Dzialo, Christine; Tamvada, Kelli; Ledogar, Justin A

2013-07-01

Recent biomechanical analyses examining the feeding adaptations of early hominins have yielded results consistent with the hypothesis that hard foods exerted a selection pressure that influenced the evolution of australopith morphology. However, this hypothesis appears inconsistent with recent reconstructions of early hominin diet based on dental microwear and stable isotopes. Thus, it is likely that either the diets of some australopiths included a high proportion of foods these taxa were poorly adapted to consume (i.e., foods that they would not have processed efficiently), or that aspects of what we thought we knew about the functional morphology of teeth must be wrong. Evaluation of these possibilities requires a recognition that analyses based on microwear, isotopes, finite element modeling, and enamel chips and cracks each test different types of hypotheses and allow different types of inferences. Microwear and isotopic analyses are best suited to reconstructing broad dietary patterns, but are limited in their ability to falsify specific hypotheses about morphological adaptation. Conversely, finite element analysis is a tool for evaluating the mechanical basis of form-function relationships, but says little about the frequency with which specific behaviors were performed or the particular types of food that were consumed. Enamel chip and crack analyses are means of both reconstructing diet and examining biomechanics. We suggest that current evidence is consistent with the hypothesis that certain derived australopith traits are adaptations for consuming hard foods, but that australopiths had generalized diets that could include high proportions of foods that were both compliant and tough. Copyright © 2013 Wiley Periodicals, Inc.

Textured perovskite cells

NARCIS (Netherlands)

Deelen, J. van; Tezsevin, Y.; Barink, M.

2017-01-01

Most research of texturization of solar cells has been devoted to Si based cells. For perovskites, it was assumed that texturization would not have much of an impact because of the relatively low refractive indexes lead to relatively low reflection as compared to the Si based cells. However, our

Dental Calculus Arrest of Dental Caries

OpenAIRE

Keyes, Paul H.; Rams, Thomas E.

2016-01-01

Background An inverse relationship between dental calculus mineralization and dental caries demineralization on teeth has been noted in some studies. Dental calculus may even form superficial layers over existing dental caries and arrest their progression, but this phenomenon has been only rarely documented and infrequently considered in the field of Cariology. To further assess the occurrence of dental calculus arrest of dental caries, this study evaluated a large number of extracted human t...

Efficient rolling texture predictions and texture-sensitive thermomechanical properties of α-uranium foils

Science.gov (United States)

Steiner, Matthew A.; Klein, Robert W.; Calhoun, Christopher A.; Knezevic, Marko; Garlea, Elena; Agnew, Sean R.

2017-11-01

Finite element (FE) analysis was used to simulate the strain history of an α-uranium foil during cold straight-rolling, with the sheet modeled as an isotropic elastoplastic continuum. The resulting strain history was then used as input for a viscoplastic self-consistent (VPSC) polycrystal plasticity model to simulate crystallographic texture evolution. Mid-plane textures predicted via the combined FE→VPSC approach show alignment of the (010) poles along the rolling direction (RD), and the (001) poles along the normal direction (ND) with a symmetric splitting along RD. The surface texture is similar to that of the mid-plane, but with a shear-induced asymmetry that favors one of the RD split features of the (001) pole figure. Both the mid-plane and surface textures predicted by the FE→VPSC approach agree with published experimental results for cold straight-rolled α-uranium plates, as well as predictions made by a more computationally intensive full-field crystal plasticity based finite element model. α-uranium foils produced by cold-rolling must typically undergo a recrystallization anneal to restore ductility prior to their final application, resulting in significant texture evolution from the cold-rolled plate deformation texture. Using the texture measured from a foil in the final recrystallized state, coefficients of thermal expansion and the elastic stiffness tensors were calculated using a thermo-elastic self-consistent model, and the anisotropic yield loci and flow curves along the RD, TD, and ND were predicted using the VPSC code.

Perceptual asymmetry in texture perception.

OpenAIRE

Williams, D; Julesz, B

1992-01-01

A fundamental property of human visual perception is our ability to distinguish between textures. A concerted effort has been made to account for texture segregation in terms of linear spatial filter models and their nonlinear extensions. However, for certain texture pairs the ease of discrimination changes when the role of figure and ground are reversed. This asymmetry poses a problem for both linear and nonlinear models. We have isolated a property of texture perception that can account for...

Chewing Duration Time Of Various Food Textures In Young Adults

Directory of Open Access Journals (Sweden)

Raísa Coutinho Vitcel

2017-02-01

Full Text Available OBJECTIVE: To obtain reference values of chewing time of several food textures in young adults. METHOD: descriptive study with a quantitative approach that was developed in a clinical reference, being the population composed of 40 young adults between 18-30 years of age, of both genres. As exclusion criteria: those with neuromuscular and / or degenerative diseases or consequences thereof, as well as subjects who were making use of any orthodontic / orthopedic resource. We conducted a dental evaluation, followed by a clinical assessment. One at a time, the following foods were offered: French bread, wafer biscuit, roasted cashews, for voluntary chewing.  To measure the food chewing time, we used a stopwatch, and this collection procedure was filmed. Data analysis was performed by means of the SPSS statistics 20.0 (IBM® program. RESULTS: There was a statistically significant difference (p < 0.05 between the medians of chewing time of French bread, wafer biscuit and cashew nuts, which were 33.0s (interquartile amplitude 29.0 - 40.0, 10.0s (interquartile amplitude 8.25-12.0 and 18.5s (interquartile amplitude 15.0-23.75, respectively. CONCLUSION: The texture of foods influences the length of mastication. The more rigid is the food, the more cycles and mandibular movements, and therefore the longer the duration of chewing.

The effect of substrate texture and oxidation temperature on oxide texture development in zirconium alloys

Energy Technology Data Exchange (ETDEWEB)

Garner, A., E-mail: alistair.garner@manchester.ac.uk [Materials Performance Centre, University of Manchester, Grosvenor Street, Manchester, M17HS (United Kingdom); Frankel, P. [Materials Performance Centre, University of Manchester, Grosvenor Street, Manchester, M17HS (United Kingdom); Partezana, J. [Westinghouse Electric Company, 1332 Beulah Road, Pittsburgh, PA 15235 (United States); Preuss, M. [Materials Performance Centre, University of Manchester, Grosvenor Street, Manchester, M17HS (United Kingdom)

2017-02-15

During corrosion of zirconium alloys a highly textured oxide is formed, the degree of this preferred orientation has previously been shown to be an important factor in determining the corrosion behaviour of these alloys. Two distinct experiments were designed in order to investigate the origin of this oxide texture development on two commercial alloys. Firstly, sheet samples of Zircaloy-4 were oxidised between 500 and 800 °C in air. The resulting monoclinic oxide texture strength was observed to decrease with increasing oxidation temperature. In a second experiment, orthogonal faces of Low Tin ZIRLO{sub ™} were oxidised in 360 °C water, providing different substrate textures but identical microstructures. The substrate texture was observed to have a negligible effect on the corrosion performance whilst the major orientation of both oxide phases was found to be independent of substrate orientation. It is concluded that the main driving force for oxide texture development in single-phase zirconium alloys is the compressive stress caused by the Zr−ZrO{sub 2} transformation. - Highlights: • Substrate orientation does not significantly affect oxide texture development. • Corrosion performance is independent of substrate texture. • Monoclinic oxide texture strength decreases with increasing oxidation temperature. • The main driving force for texture development is the oxidation-induced stress.

Perceptual asymmetry in texture perception.

Science.gov (United States)

Williams, D; Julesz, B

1992-07-15

A fundamental property of human visual perception is our ability to distinguish between textures. A concerted effort has been made to account for texture segregation in terms of linear spatial filter models and their nonlinear extensions. However, for certain texture pairs the ease of discrimination changes when the role of figure and ground are reversed. This asymmetry poses a problem for both linear and nonlinear models. We have isolated a property of texture perception that can account for this asymmetry in discrimination: subjective closure. This property, which is also responsible for visual illusions, appears to be explainable by early visual processes alone. Our results force a reexamination of the process of human texture segregation and of some recent models that were introduced to explain it.

Gravitational effects of global textures

International Nuclear Information System (INIS)

Noetzold, D.

1990-03-01

A solution for the dynamics of global textures is obtained. Their gravitational field during the collapse and the subsequent evolution is found to be given solely by a space-time dependent ''deficit solid angle.'' The frequency shift of photons traversing this gravitational field is calculated. The space-time dependent texture metric locally contracts the volume of three-space and thereby induces overdensities in homogeneous matter distributions. There are no gravitational forces unless matter has a nonzero angular momentum with respect to the texture origin which would be the case for moving textures

Transformations in destination texture

DEFF Research Database (Denmark)

Gyimóthy, Szilvia

2018-01-01

This article takes heterogeographical approaches to understand Bollywood-induced destination transformations in Switzerland. Positioned within the theoretical field of mediatized mobility, the study contextualizes Bollywood-induced tourism in Europe the concept of texture. Textural analysis (base...

Annealing texture of rolled nickel alloys

International Nuclear Information System (INIS)

Meshchaninov, I.V.; Khayutin, S.G.

1976-01-01

A texture of pure nickel and binary alloys after the 95% rolling and annealing has been studied. Insoluble additives (Mg, Zr) slacken the cubic texture in nickel and neral slackening of the texture (Zr). In the case of alloying with silicium (up to 2%) the texture practically coinsides with that of a technical-grade nickel. The remaining soluble additives either do not change the texture of pure nickel (C, Nb) or enhance the sharpness and intensity of the cubic compontnt (Al, Cu, Mn, Cr, Mo, W, Co -at their content 0.5 to 2.0%). A model is proposed by which variation of the annealing texture upon alloying is caused by dissimilar effect of the alloying elements on the mobility of high- and low-angle grain boundaries

Laser surface texturing of tool steel: textured surfaces quality evaluation

Science.gov (United States)

Šugár, Peter; Šugárová, Jana; Frnčík, Martin

2016-05-01

In this experimental investigation the laser surface texturing of tool steel of type 90MnCrV8 has been conducted. The 5-axis highly dynamic laser precision machining centre Lasertec 80 Shape equipped with the nano-second pulsed ytterbium fibre laser and CNC system Siemens 840 D was used. The planar and spherical surfaces first prepared by turning have been textured. The regular array of spherical and ellipsoidal dimples with a different dimensions and different surface density has been created. Laser surface texturing has been realized under different combinations of process parameters: pulse frequency, pulse energy and laser beam scanning speed. The morphological characterization of ablated surfaces has been performed using scanning electron microscopy (SEM) technique. The results show limited possibility of ns pulse fibre laser application to generate different surface structures for tribological modification of metallic materials. These structures were obtained by varying the processing conditions between surface ablation, to surface remelting. In all cases the areas of molten material and re-cast layers were observed on the bottom and walls of the dimples. Beside the influence of laser beam parameters on the machined surface quality during laser machining of regular hemispherical and elipsoidal dimple texture on parabolic and hemispherical surfaces has been studied.

75 FR 33169 - Dental Devices: Classification of Dental Amalgam, Reclassification of Dental Mercury, Designation...

Science.gov (United States)

2010-06-11

.... FDA-2008-N-0163] (formerly Docket No. 2001N-0067) RIN 0910-AG21 Dental Devices: Classification of Dental Amalgam, Reclassification of Dental Mercury, Designation of Special Controls for Dental Amalgam... the Federal Register of August 4, 2009 (74 FR 38686) which classified dental amalgam as a class II...

Texture classification using autoregressive filtering

Science.gov (United States)

Lawton, W. M.; Lee, M.

1984-01-01

A general theory of image texture models is proposed and its applicability to the problem of scene segmentation using texture classification is discussed. An algorithm, based on half-plane autoregressive filtering, which optimally utilizes second order statistics to discriminate between texture classes represented by arbitrary wide sense stationary random fields is described. Empirical results of applying this algorithm to natural and sysnthesized scenes are presented and future research is outlined.

CRUMB TEXTURE OF SPELT BREAD

Directory of Open Access Journals (Sweden)

Joanna Korczyk-Szabó

2013-12-01

Full Text Available Abstract The bread quality is considerably dependent on the texture characteristic of bread crumb. Crumb texture is an important quality indicator, as consumer prefer different bread taste. Texture analysis is primarily concerned with the evaluation of mechanical characteristics where a material is subjected to a controlled force from which a deformation curve of its response is generated. It is an objective physical examination of baked products and gives direct information on the product quality, oppositely to dough rheology tests what inform on the baking suitability of the flour, as raw material. This is why the texture analysis is one of the most helpful analytical methods of the product development. In the framework of our research during the years 2008 – 2009 were analyzed selected indicators for bread texture quality of five Triticum spelta L. varieties – Altgold, Oberkulmer Rotkorn, Ostro, Rubiota and Franckenkorn grown in an ecological system. The bread texture quality was evaluated on texture analyzer TA.XT Plus (Stable Micro Systems, Surrey, UK, following the AACC (74-09 standard method and expressed as crumb firmness (N, stiffness (N.mm-1 and relative elasticity (%. Our research proved that all selected indicators were significantly influenced by the year of growing and variety. The most soft bread was achieved in Rubiota, whereas bread crumb samples from Franckenkorn and Altgold were the most firm and stiff. Correlation analysis showed strong negative correlation between relative elasticity and bread crumb firmness as well as bread stiffness (-0.81++, -0.78++. The spelt grain can be a good source for making bread flour, but is closely dependent on choice of spelt variety. The spelt wheat bread crumb texture need further investigation as it can be a reliable quality parameter.

Symmetry realization of texture zeros

International Nuclear Information System (INIS)

Grimus, W.; Joshipura, A.S.; Lavoura, L.; Tanimoto, M.

2004-01-01

We show that it is possible to enforce texture zeros in arbitrary entries of the fermion mass matrices by means of Abelian symmetries; in this way, many popular mass-matrix textures find a symmetry justification. We propose two alternative methods which allow one to place zeros in any number of elements of the mass matrices that one wants. They are applicable simultaneously in the quark and lepton sectors. They are also applicable in grand unified theories. The number of scalar fields required by our methods may be large; still, in many interesting cases this number can be reduced considerably. The larger the desired number of texture zeros is, the simpler are the models which reproduce the texture. (orig.)

Texture and anisotropy in ferroelectric lead metaniobate

Science.gov (United States)

Iverson, Benjamin John

Ferroelectric lead metaniobate, PbNb2O6, is a piezoelectric ceramic typically used because of its elevated Curie temperature and anisotropic properties. However, the piezoelectric constant, d33, is relatively low in randomly oriented ceramics when compared to other ferroelectrics. Crystallographic texturing is often employed to increase the piezoelectric constant because the spontaneous polarization axes of grains are better aligned. In this research, crystallographic textures induced through tape casting are distinguished from textures induced through electrical poling. Texture is described using multiple quantitative approaches utilizing X-ray and neutron time-of-flight diffraction. Tape casting lead metaniobate with an inclusion of acicular template particles induces an orthotropic texture distribution. Templated grain growth from seed particles oriented during casting results in anisotropic grain structures. The degree of preferred orientation is directly linked to the shear behavior of the tape cast slurry. Increases in template concentration, slurry viscosity, and casting velocity lead to larger textures by inducing more particle orientation in the tape casting plane. The maximum 010 texture distributions were two and a half multiples of a random distribution. Ferroelectric texture was induced by electrical poling. Electric poling increases the volume of material oriented with the spontaneous polarization direction in the material. Samples with an initial paraelectric texture exhibit a greater change in the domain volume fraction during electrical poling than randomly oriented ceramics. In tape cast samples, the resulting piezoelectric response is proportional to the 010 texture present prior to poling. This results in property anisotropy dependent on initial texture. Piezoelectric properties measured on the most textured ceramics were similar to those obtained with a commercial standard.

Novel Osteogenic Ti-6Al-4V Device For Restoration Of Dental Function In Patients With Large Bone Deficiencies: Design, Development And Implementation.

Science.gov (United States)

Cohen, D J; Cheng, A; Kahn, A; Aviram, M; Whitehead, A J; Hyzy, S L; Clohessy, R M; Boyan, B D; Schwartz, Z

2016-02-08

Custom devices supporting bone regeneration and implant placement are needed for edentulous patients with large mandibular deficiencies where endosteal implantation is not possible. We developed a novel subperiosteal titanium-aluminum-vanadium bone onlay device produced by additive manufacturing (AM) and post-fabrication osteogenic micro-/nano-scale surface texture modification. Human osteoblasts produced osteogenic and angiogenic factors when grown on laser-sintered nano-/micro-textured surfaces compared to smooth surfaces. Surface-processed constructs caused higher bone-to-implant contact, vertical bone growth into disk pores (microCT and histomorphometry), and mechanical pull-out force at 5 and 10 w on rat calvaria compared to non surface-modified constructs, even when pre-treating the bone to stimulate osteogenesis. Surface-modified wrap-implants placed around rabbit tibias osseointegrated by 6 w. Finally, patient-specific constructs designed to support dental implants produced via AM and surface-processing were implanted on edentulous mandibular bone. 3 and 8 month post-operative images showed new bone formation and osseointegration of the device and indicated stability of the dental implants.

Food Texture Preferences in Infants Versus Toddlers.

Science.gov (United States)

Lundy, Brenda; And Others

1998-01-01

Compared food texture preferences during infancy and toddlerhood. Found that infants displayed more negative expressions and head and body movements in response to complex textures than to simple textures. Toddlers displayed more positive head and body movements and more eagerness in response to complex than to simple textures. Experience with…

Dental Amalgam

Science.gov (United States)

... Products and Medical Procedures Dental Devices Dental Amalgam Dental Amalgam Share Tweet Linkedin Pin it More sharing options Linkedin Pin it Email Print Dental amalgam is a dental filling material which is ...

Texture analysis using Renyi's generalized entropies

NARCIS (Netherlands)

Grigorescu, SE; Petkov, N

2003-01-01

We propose a texture analysis method based on Renyi's generalized entropies. The method aims at identifying texels in regular textures by searching for the smallest window through which the minimum number of different visual patterns is observed when moving the window over a given texture. The

TEXTURAL DESCRIPTORS FOR MULTIPHASIC ORE PARTICLES

Directory of Open Access Journals (Sweden)

Laura Pérez-Barnuevo

2012-11-01

Full Text Available Monitoring of mineral processing circuits by means of particle liberation analysis through quantitative image analysis has become a routine technique within the last decades. Usually, liberation indices are computed as weight proportions, which is not informative enough when complex texture ores are treated by flotation. In these cases, liberation has to be computed as phase surface exposed to reactants, and textural relationships between minerals have to be characterized to determine the possibility of increasing exposure. In this paper, some indices to achieve a complete texture characterization have been developed in terms of 2D phase contact and mineral surfaces exposure. Indices suggested by other authors are also compared. The response of this set of parameters against textural changes has been explored on simple synthetic textures ranging from single to multiple inclusions and single to multiple veins and their ability to discriminate between different textural features is analyzed over real mineral particles with known internal structure.

Mimicking human texture classification

NARCIS (Netherlands)

Rogowitz, B.E.; van Rikxoort, Eva M.; van den Broek, Egon; Pappas, T.N.; Schouten, Theo E.; Daly, S.J.

2005-01-01

In an attempt to mimic human (colorful) texture classification by a clustering algorithm three lines of research have been encountered, in which as test set 180 texture images (both their color and gray-scale equivalent) were drawn from the OuTex and VisTex databases. First, a k-means algorithm was

Weaker dental enamel explains dental decay.

Science.gov (United States)

Vieira, Alexandre R; Gibson, Carolyn W; Deeley, Kathleen; Xue, Hui; Li, Yong

2015-01-01

Dental caries continues to be the most prevalent bacteria-mediated non-contagious disease of humankind. Dental professionals assert the disease can be explained by poor oral hygiene and a diet rich in sugars but this does not account for caries free individuals exposed to the same risk factors. In order to test the hypothesis that amount of amelogenin during enamel development can influence caries susceptibility, we generated multiple strains of mice with varying levels of available amelogenin during dental development. Mechanical tests showed that dental enamel developed with less amelogenin is "weaker" while the dental enamel of animals over-expressing amelogenin appears to be more resistant to acid dissolution.

Description of textures by a structural analysis.

Science.gov (United States)

Tomita, F; Shirai, Y; Tsuji, S

1982-02-01

A structural analysis system for describing natural textures is introduced. The analyzer automatically extracts the texture elements in an input image, measures their properties, classifies them into some distinctive classes (one ``ground'' class and some ``figure'' classes), and computes the distributions of the gray level, the shape, and the placement of the texture elements in each class. These descriptions are used for classification of texture images. An analysis-by-synthesis method for evaluating texture analyzers is also presented. We propose a synthesizer which generates a texture image based on the descriptions. By comparing the reconstructed image with the original one, we can see what information is preserved and what is lost in the descriptions.

Geometric Total Variation for Texture Deformation

DEFF Research Database (Denmark)

Bespalov, Dmitriy; Dahl, Anders Lindbjerg; Shokoufandeh, Ali

2010-01-01

In this work we propose a novel variational method that we intend to use for estimating non-rigid texture deformation. The method is able to capture variation in grayscale images with respect to the geometry of its features. Our experimental evaluations demonstrate that accounting for geometry...... of features in texture images leads to significant improvements in localization of these features, when textures undergo geometrical transformations. Accurate localization of features in the presense of unkown deformations is a crucial property for texture characterization methods, and we intend to expoit...

Dental Fear and Delayed Dental Care in Appalachia-West Virginia.

Science.gov (United States)

Wiener, R Constance

2015-08-01

The people of Appalachia-West Virginia are culturally unique and are known to have oral health disparities. The purpose of this study was to evaluate dental fear in relation to delayed dental care as a factor influencing oral health behaviors within this culture. A cross sectional study design was used. Participants were urgent care patients in a university dental clinic. The sample included 140 adults over age 18 years. The Dental Fear Survey was used to determine dental fear level. Self-report of delayed dental care was provided by the participants. The Dental Fear Survey was dichotomized at score 33, with higher scores indicating dental fear. The prevalence of dental fear was 47.1% (n=66). There was a significant association of dental fear and dental delay. The unadjusted odds ratio was 2.87 (95% CI: 1.17, 7.04; p=0.021). The adjusted odds ratio was 3.83 (95%CI: 1.14, 12.82; p=0.030), controlling for tobacco use, perceived oral health status, pain, and last dental visit. A difference in dental delay between men and women was not present in this sample. The only significant variable in delayed dental care was dental fear. In Appalachia-West Virginia, there remains a high level of dental fear, despite advances in dental care, techniques, and procedures. Copyright © 2015 The American Dental Hygienists’ Association.

Developing a flexible core Dental Public Health curriculum for predoctoral dental and dental hygiene schools.

Science.gov (United States)

Atchison, Kathryn; Mascarenhas, Ana Karina; Bhoopathi, Vinodh

2015-01-01

The curriculum for graduating dental and dental hygiene students must prepare them to contribute to the improvement or maintenance of health for individual patient's and the public's health. The objective is to describe the background for and the process used to develop a core Dental Public Health Curriculum for such students. The process used was to solicit and review existing dental public health curriculum in dental and dental hygiene schools; review curriculum for other health professionals; identify the themes needed to frame the curriculum; select usable materials and identify gaps in existing curricular materials; and develop appropriate curriculum materials that would embody the competencies developed for undergraduate dental and dental hygiene education. Twenty-three topics were identified as embodying the eight competencies. Based on these topics, six courses, Principles of Dental Public Health, Evidence-Based Dentistry, Ethics and Dental Public Health, Dental Public Health Policy and Advocacy, Oral Health Promotion and Disease Prevention, and Oral Health Literacy and Dental Public Health, were prepared. Each course includes syllabus, PowerPoint presentations, student assignments and activities, instructor guide, and classroom discussion points. Depending on the hours available in the existing curriculum at the dental or hygiene school, lecture presentations and take home assignments/discussions may be used independently or in combination with presentations from other courses. In addition, individual discussions and activities may be used to integrate dental public health materials into other courses. A flexible curriculum is available at the AAPHD website to enable the incorporation of DPH topics into the curriculum. © 2015 American Association of Public Health Dentistry.

Feature-aware natural texture synthesis

KAUST Repository

Wu, Fuzhang; Dong, Weiming; Kong, Yan; Mei, Xing; Yan, Dongming; Zhang, Xiaopeng; Paul, Jean Claude

2014-01-01

This article presents a framework for natural texture synthesis and processing. This framework is motivated by the observation that given examples captured in natural scene, texture synthesis addresses a critical problem, namely, that synthesis

Deformation texture and microtexture development in zircaloy-2

International Nuclear Information System (INIS)

Vanitha, C.; Kiran Kumar, M.; Samajdar, I.; Vishvanathan, N.N.; Dey, G.K.; Tewari, R.; Srivastava, D.; Banerjee, S.

2002-01-01

In the present study, two starting materials used were as-cast Zircaloy-2 with random texture and the finished tube with relatively stronger starting texture. Specimens of the alloys were hot rolled to various strains at different temperature. The texture measurement was carried out and was represented in the form of Orientation Distribution Function which showed a sluggish texture development on high temperature deformation. In the case of as cast alloy with increase in strain at a constant deformation temperature, development in the texture was significant. Upon increasing the working temperature, rate of the overall texture development has been found to reduce. This could be due to reduced slip-twin activities, recovery or due to recrystallization. Microstructural and relative hardening studies were carried out for understanding the mechanisms of deformation texture developments at warm and hot working stages. In the case of finished tube having initially strong texture exhibited slower development in texture on warm and hot rolling. (author)

Texture Repairing by Unified Low Rank Optimization

Institute of Scientific and Technical Information of China (English)

Xiao Liang; Xiang Ren; Zhengdong Zhang; Yi Ma

2016-01-01

In this paper, we show how to harness both low-rank and sparse structures in regular or near-regular textures for image completion. Our method is based on a unified formulation for both random and contiguous corruption. In addition to the low rank property of texture, the algorithm also uses the sparse assumption of the natural image: because the natural image is piecewise smooth, it is sparse in certain transformed domain (such as Fourier or wavelet transform). We combine low-rank and sparsity properties of the texture image together in the proposed algorithm. Our algorithm based on convex optimization can automatically and correctly repair the global structure of a corrupted texture, even without precise information about the regions to be completed. This algorithm integrates texture rectification and repairing into one optimization problem. Through extensive simulations, we show our method can complete and repair textures corrupted by errors with both random and contiguous supports better than existing low-rank matrix recovery methods. Our method demonstrates significant advantage over local patch based texture synthesis techniques in dealing with large corruption, non-uniform texture, and large perspective deformation.

Economic impact of dental hygienists on solo dental practices.

Science.gov (United States)

Lazar, Vickie F; Guay, Albert H; Beazoglou, Tryfon J

2012-08-01

The fact that a significant percentage of dentists employ dental hygienists raises an important question: Are dental practices that utilize a dental hygienist structurally and operationally different from practices that do not? This article explores differences among dental practices that operate with and without dental hygienists. Using data from the American Dental Association's 2003 Survey of Dental Practice, a random sample survey of U.S. dentists, descriptive statistics were used to compare selected characteristics of solo general practitioners with and without dental hygienists. Multivariate regression analysis was used to estimate the effect of dental hygienists on the gross billings and net incomes of solo general practitioners. Differences in practice characteristics--such as hours spent in the practice and hours spent treating patients, wait time for a recall visit, number of operatories, square feet of office space, net income, and gross billings--were found between solo general practitioners who had dental hygienists and those who did not. Solo general practitioners with dental hygienists had higher gross billings. Higher gross billings would be expected, as would higher expenses. However, net incomes of those with dental hygienists were also higher. In contrast, the mean waiting time for a recall visit was higher among dentists who employed dental hygienists. Depending on personal preferences, availability of qualified personnel, etc., dentists who do not employ dental hygienists but have been contemplating that path may want to further research the benefits and opportunities that may be realized.

Cascaded Amplitude Modulations in Sound Texture Perception

DEFF Research Database (Denmark)

McWalter, Richard Ian; Dau, Torsten

2017-01-01

. In this study, we investigated the perception of sound textures that contain rhythmic structure, specifically second-order amplitude modulations that arise from the interaction of different modulation rates, previously described as "beating" in the envelope-frequency domain. We developed an auditory texture...... model that utilizes a cascade of modulation filterbanks that capture the structure of simple rhythmic patterns. The model was examined in a series of psychophysical listening experiments using synthetic sound textures-stimuli generated using time-averaged statistics measured from real-world textures....... In a texture identification task, our results indicated that second-order amplitude modulation sensitivity enhanced recognition. Next, we examined the contribution of the second-order modulation analysis in a preference task, where the proposed auditory texture model was preferred over a range of model...

Advecting Procedural Textures for 2D Flow Animation

Science.gov (United States)

Kao, David; Pang, Alex; Moran, Pat (Technical Monitor)

2001-01-01

This paper proposes the use of specially generated 3D procedural textures for visualizing steady state 2D flow fields. We use the flow field to advect and animate the texture over time. However, using standard texture advection techniques and arbitrary textures will introduce some undesirable effects such as: (a) expanding texture from a critical source point, (b) streaking pattern from the boundary of the flowfield, (c) crowding of advected textures near an attracting spiral or sink, and (d) absent or lack of textures in some regions of the flow. This paper proposes a number of strategies to solve these problems. We demonstrate how the technique works using both synthetic data and computational fluid dynamics data.

Cascaded Amplitude Modulations in Sound Texture Perception

Directory of Open Access Journals (Sweden)

Richard McWalter

2017-09-01

Full Text Available Sound textures, such as crackling fire or chirping crickets, represent a broad class of sounds defined by their homogeneous temporal structure. It has been suggested that the perception of texture is mediated by time-averaged summary statistics measured from early auditory representations. In this study, we investigated the perception of sound textures that contain rhythmic structure, specifically second-order amplitude modulations that arise from the interaction of different modulation rates, previously described as “beating” in the envelope-frequency domain. We developed an auditory texture model that utilizes a cascade of modulation filterbanks that capture the structure of simple rhythmic patterns. The model was examined in a series of psychophysical listening experiments using synthetic sound textures—stimuli generated using time-averaged statistics measured from real-world textures. In a texture identification task, our results indicated that second-order amplitude modulation sensitivity enhanced recognition. Next, we examined the contribution of the second-order modulation analysis in a preference task, where the proposed auditory texture model was preferred over a range of model deviants that lacked second-order modulation rate sensitivity. Lastly, the discriminability of textures that included second-order amplitude modulations appeared to be perceived using a time-averaging process. Overall, our results demonstrate that the inclusion of second-order modulation analysis generates improvements in the perceived quality of synthetic textures compared to the first-order modulation analysis considered in previous approaches.

Natural texture retrieval based on perceptual similarity measurement

Science.gov (United States)

Gao, Ying; Dong, Junyu; Lou, Jianwen; Qi, Lin; Liu, Jun

2018-04-01

A typical texture retrieval system performs feature comparison and might not be able to make human-like judgments of image similarity. Meanwhile, it is commonly known that perceptual texture similarity is difficult to be described by traditional image features. In this paper, we propose a new texture retrieval scheme based on texture perceptual similarity. The key of the proposed scheme is that prediction of perceptual similarity is performed by learning a non-linear mapping from image features space to perceptual texture space by using Random Forest. We test the method on natural texture dataset and apply it on a new wallpapers dataset. Experimental results demonstrate that the proposed texture retrieval scheme with perceptual similarity improves the retrieval performance over traditional image features.

Epitaxial hexagonal materials on IBAD-textured substrates

Science.gov (United States)

Matias, Vladimir; Yung, Christopher

2017-08-15

A multilayer structure including a hexagonal epitaxial layer, such as GaN or other group III-nitride (III-N) semiconductors, a oriented textured layer, and a non-single crystal substrate, and methods for making the same. The textured layer has a crystalline alignment preferably formed by the ion-beam assisted deposition (IBAD) texturing process and can be biaxially aligned. The in-plane crystalline texture of the textured layer is sufficiently low to allow growth of high quality hexagonal material, but can still be significantly greater than the required in-plane crystalline texture of the hexagonal material. The IBAD process enables low-cost, large-area, flexible metal foil substrates to be used as potential alternatives to single-crystal sapphire and silicon for manufacture of electronic devices, enabling scaled-up roll-to-roll, sheet-to-sheet, or similar fabrication processes to be used. The user is able to choose a substrate for its mechanical and thermal properties, such as how well its coefficient of thermal expansion matches that of the hexagonal epitaxial layer, while choosing a textured layer that more closely lattice matches that layer.

Emotional effects of dynamic textures

NARCIS (Netherlands)

Toet, A.; Henselmans, M.; Lucassen, M.P.; Gevers, T.

2011-01-01

This study explores the effects of various spatiotemporal dynamic texture characteristics on human emotions. The emotional experience of auditory (eg, music) and haptic repetitive patterns has been studied extensively. In contrast, the emotional experience of visual dynamic textures is still largely

Modeling Human Aesthetic Perception of Visual Textures

NARCIS (Netherlands)

Thumfart, Stefan; Jacobs, Richard H. A. H.; Lughofer, Edwin; Eitzinger, Christian; Cornelissen, Frans W.; Groissboeck, Werner; Richter, Roland

Texture is extensively used in areas such as product design and architecture to convey specific aesthetic information. Using the results of a psychological experiment, we model the relationship between computational texture features and aesthetic properties of visual textures. Contrary to previous

Human versus artificial texture perception

NARCIS (Netherlands)

Petiet, Peter J.; van Erp, J.; Drullman, R.; van den Broek, Egon; Beintema, J.; van Wijngaarden, S.

2006-01-01

The performances of current texture analysis algorithms are still poor, especially when applied to a large, diffuse texture domain. Most of these purely computationally driven techniques are created to function within a highly restricted domain. When applied as computer vision techniques, frequently

A Review Paper on Camouflage Texture Evaluation

OpenAIRE

Amol Patil; Girraj Prasad Rathode

2013-01-01

Traditional evaluation method of camouflage texture effect is subjective evaluation. It’s very tedious and inconvenient to direct the texture designing. In this project, a systemic and rational method for direction and evaluation of camouflage texture designing is proposed. Camouflage consists of things such as leaves, branches, or brown and green paint, which are used to make it difficult for an enemy to see military forces and equipment. A camouflage texture evaluation method based on WSSIM...

Effects of initial microstructure and texture on microstructure, texture evolution and magnetic properties of non-oriented electrical steel

Energy Technology Data Exchange (ETDEWEB)

Liu, Hai-Tao, E-mail: liuht@ral.neu.edu.cn [State Key Laboratory of Rolling and Automation, Northeastern University, P.O. Box 105, Shenyang 110819 (China); Institute of Research of Iron and Steel, Shasteel, Zhangjiagang 215625, Jiangsu (China); Li, Hua-Long [Institute of Research of Iron and Steel, Shasteel, Zhangjiagang 215625, Jiangsu (China); Wang, Hui [Science and Technology on Surface Physics and Chemistry Laboratory, P.O. Box No. 9-35, Huafengxincun, Jiangyou City, Sichuan Province 621908 (China); National Key Laboratory for Nuclear Fuel and Materials, Nuclear Power Institute of China, Chengdu 610041 (China); Liu, Yi; Gao, Fei; An, Ling-Zi; Zhao, Shi-Qi; Liu, Zhen-Yu; Wang, Guo-Dong [State Key Laboratory of Rolling and Automation, Northeastern University, P.O. Box 105, Shenyang 110819 (China)

2016-05-15

An equiaxed grained as-cast strip and a columnar grained as-cast strip was produced by using twin-roll strip casting, respectively. Both as-cast strips mainly containing 0.71 wt%Si and 0.44 wt%Al were cold rolled and annealed with or without the hot rolling prior to cold rolling. Microstructure, texture evolution along the whole processing routes and the magnetic properties were investigated in detail. It was found that the equiaxed grained strip was characterized by almost random texture while the columnar grained strip was dominated by strong λ-fiber (<001>‖ND) texture. After cold rolling and annealing, all the final sheets of both the as-cast strips showed extremely weak γ-fiber (<111>‖ND) recrystallization texture. In addition, the finally annealed sheets of the equiaxed grained strip were dominated by relatively weak λ-fiber and strong Goss ({110}<001>) recrystallization texture while those of the columnar grained strip were dominated by much stronger λ-fiber and much weaker Goss recrystallization texture regardless of whether the hot rolling was adopted before cold rolling, thus the former showed much lower magnetic induction than the latter. On the other hand, even though the finally annealed sheets of the equiaxed grained strip showed a little more homogeneous recrystallization microstructure with a little bigger grain size than those of the columnar grained strip in the case of no hot rolling, a much higher iron loss was displayed. By contrast, in the case of hot rolling, the former exhibited a little lower iron loss than the latter as a result of the more significant increase in grain size and λ-fiber recrystallization texture. The introduction of the hot rolling could increase the grain size, strengthen λ-fiber texture and weaken Goss texture of the finally annealed sheets of both the as-cast strips, leading to a much improvement in both the magnetic induction and iron loss. - Highlights: • Equiaxed and columnar grained as-cast strips were

Bayesian exploration for intelligent identification of textures

Directory of Open Access Journals (Sweden)

Jeremy A. Fishel

2012-06-01

Full Text Available In order to endow robots with humanlike abilities to characterize and identify objects, they must be provided with tactile sensors and intelligent algorithms to select, control and interpret data from useful exploratory movements. Humans make informed decisions on the sequence of exploratory movements that would yield the most information for the task, depending on what the object may be and prior knowledge of what to expect from possible exploratory movements. This study is focused on texture discrimination, a subset of a much larger group of exploratory movements and percepts that humans use to discriminate, characterize, and identify objects. Using a testbed equipped with a biologically inspired tactile sensor (the BioTac® we produced sliding movements similar to those that humans make when exploring textures. Measurement of tactile vibrations and reaction forces when exploring textures were used to extract measures of textural properties inspired from psychophysical literature (traction, roughness, and fineness. Different combinations of normal force and velocity were identified to be useful for each of these three properties. A total of 117 textures were explored with these three movements to create a database of prior experience to use for identifying these same textures in future encounters. When exploring a texture, the discrimination algorithm adaptively selects the optimal movement to make and property to measure based on previous experience to differentiate the texture from a set of plausible candidates, a process we call Bayesian exploration. Performance of 99.6% in correctly discriminating pairs of similar textures was found to exceed human capabilities. Absolute classification from the entire set of 117 textures generally required a small number of well-chosen exploratory movements (median=5 and yielded a 95.4% success rate. The method of Bayesian exploration developed and tested in this paper may generalize well to other

Dental, Dental Hygiene, and Advanced Dental Students' Use, Knowledge, and Beliefs Regarding Tobacco Products.

Science.gov (United States)

Shearston, Jenni A; Shah, Krina; Cheng, Eric; Moosvi, Rizvan; Park, Su Hyun; Patel, Naiya; Spielman, Andrew I; Weitzman, Michael L

2017-11-01

Using cigarettes and alternative tobacco products (ATPs) is associated with negative oral health outcomes, and dental health professionals are poised to help patients quit. The aim of this study was to determine dental, dental hygiene, and advanced dental students' use, knowledge, and beliefs about cigarettes and ATPs, including perceptions about their education in tobacco dependence treatment and counseling experience. All 1,783 students enrolled in the dental, dental hygiene, and postdoctoral dental programs at the New York University College of Dentistry were invited to participate in the survey in 2016. A total of 708 students at least partially completed the survey, for a response rate of 39.7%. In the results, 146 of the students (20.1%) reported ever using cigarettes, while 253 (35.7%) reported ever using any ATP. Regarding tobacco use intervention, the students reported they had not received enough training on ATPs, were neutral about cigarettes, and were somewhat confident and not so confident counseling a cigarette smoker or ATP user, respectively. By their fourth year, 77.8% of the dental students reported they had counseled someone to stop smoking cigarettes, but only 40.7% had counseled someone to stop using ATPs. Overall, all groups of students reported feeling more confident and had received more education on interventions for cigarettes than for ATPs (ptobacco and did not perceive they had received enough training on intervening with patients on use of cigarettes and ATPs. These findings call for a revised tobacco education curriculum for dental, dental hygiene, and advanced dental students, focused on building knowledge and confidence for promoting tobacco dependence treatment.

BREAD CRUMBS TEXTURE OF SPELT

Directory of Open Access Journals (Sweden)

Joanna Korczyk – Szabó

2014-02-01

Full Text Available Texture analysis is an objective physical examination of baked products and gives direct information on the product quality, oppositely to dough rheology tests what inform on the baking suitability of the flour, as raw material. Evaluation of the mechanical properties of bread crumb is important not only for quality assurance in the bakeries, but also for assessing the effects of changes in dough ingredients and processing condition and also for describing the changes in bread crumb during storage. Crumb cellular structure is an important quality criterion used in commercial baking and research laboratories to judge bread quality alongside taste, crumb colour and crumb physical texture. In the framework of our research during the years 2010 – 2011 were analyzed selected indicators of bread crumb for texture quality of three Triticum spelta L. cultivars – Altgold, Rubiota and Ostro grown in an ecological system. The bread texture quality was evaluated on texture analyzer TA.XT Plus (Stable Micro Systems, Surrey, UK, following the AACC (74-09 standard and expressed as crumb firmness (N, stiffness (N.mm-1 and relative elasticity (%. Our research proved that all selected indicators were significantly influenced by the year of growing and variety. The most soft bread was achieved in Rubiota, whereas bread crumb samples from Altgold and Ostro were the most firm and stiff. Correlation analysis showed strong negative correlation between relative elasticity and bread crumb firmness as well as bread stiffness (-0.65++, -0.66++. The spelt wheat bread crumb texture need further investigation as it can be a reliable quality parameter.

42 CFR Appendix G to Part 75 - Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography

Science.gov (United States)

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography G Appendix G to Part 75 Public Health PUBLIC HEALTH SERVICE...—Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography The following section...

In Vitro Description of Macroscopic Changes of Dental Amalgam Discs Subject to High Temperatures to Forensic Purposes.

Science.gov (United States)

Arcos, Carlos; Díaz, Juan-David; Canencio, Kenny; Rodríguez, Diana; Viveros, Carlos; Vega, Jonathan; Lores, Juliana; Sinisterra, Gustavo; Sepúlveda, Wilmer; Moreno, Freddy

2015-07-01

To describe the behavior of 45 discs of dental amalgam of known dimension prepared from three commercially available brands of dental amalgam (Contour® Kerr®-USA, Admix® SDI®-Australia and Nu Alloy® Newstethic®-Colombia) when subjected to the action of high temperatures (200 °C, 400 °C, 600 °C, 800 °C, 1000 °C). It was hoped to establish parameters that could be used for human dental identification in cases of charred, burned or incinerated human remains. A pseudo-experimental descriptive in-vitro study was designed to describe the macroscopic physical changes to the surface of 45 discs of pre-prepared amalgam of three commercially available brands exposed to a range of high temperatures. Characteristic and repetitive physical changes were a noticeable feature of the discs of amalgam of each brand of amalgam subjected to the different temperature ranges. These physical changes included changes in dimensional stability, changes in texture, changes in colour, changes in the appearance of fissures and cracks and changes in the fracture and fragmentation of the sample. The characteristics of dental amalgam may be of assistance in cases of human identification where charred, burned or incinerated human remains are a feature and where fingerprints or other soft tissue features are unavailable.

Quantitative Characterisation of Surface Texture

DEFF Research Database (Denmark)

De Chiffre, Leonardo; Lonardo, P.M.; Trumpold, H.

2000-01-01

This paper reviews the different methods used to give a quantitative characterisation of surface texture. The paper contains a review of conventional 2D as well as 3D roughness parameters, with particular emphasis on recent international standards and developments. It presents new texture...

Fast Synthesis of Dynamic Colour Textures

Czech Academy of Sciences Publication Activity Database

Filip, Jiří; Haindl, Michal; Chetverikov, D.

-, č. 66 (2006), s. 53-54 ISSN 0926-4981 R&D Projects: GA AV ČR IAA2075302; GA AV ČR 1ET400750407; GA MŠk 1M0572 EU Projects: European Commission(XE) 507752 - MUSCLE Institutional research plan: CEZ:AV0Z10750506 Keywords : dynamic colour texture * texture synthesis * texture modelling Subject RIV: BD - Theory of Information http://www.ercim.org/publication/Ercim_News/enw66/haindl.html

Measurement uncertainty associated with chromatic confocal profilometry for 3D surface texture characterization of natural human enamel.

Science.gov (United States)

Mullan, F; Bartlett, D; Austin, R S

2017-06-01

To investigate the measurement performance of a chromatic confocal profilometer for quantification of surface texture of natural human enamel in vitro. Contributions to the measurement uncertainty from all potential sources of measurement error using a chromatic confocal profilometer and surface metrology software were quantified using a series of surface metrology calibration artifacts and pre-worn enamel samples. The 3D surface texture analysis protocol was optimized across 0.04mm 2 of natural and unpolished enamel undergoing dietary acid erosion (pH 3.2, titratable acidity 41.3mmolOH/L). Flatness deviations due to the x, y stage mechanical movement were the major contribution to the measurement uncertainty; with maximum Sz flatness errors of 0.49μm. Whereas measurement noise; non-linearity's in x, y, z and enamel sample dimensional instability contributed minimal errors. The measurement errors were propagated into an uncertainty budget following a Type B uncertainty evaluation in order to calculate the Standard Combined Uncertainty (u c ), which was ±0.28μm. Statistically significant increases in the median (IQR) roughness (Sa) of the polished samples occurred after 15 (+0.17 (0.13)μm), 30 (+0.12 (0.09)μm) and 45 (+0.18 (0.15)μm) min of erosion (Pchromatic confocal profilometry was from flatness deviations however by optimizing measurement protocols the profilometer successfully characterized surface texture changes in enamel from erosive wear in vitro. Copyright © 2017 The Academy of Dental Materials. All rights reserved.

Correlation between macro texture measures carried out by the volumetric method and by different laser texture meter

International Nuclear Information System (INIS)

Parra Ruiz, L.; Yanguas Gonzalez, S. J.

2013-01-01

The reference value for the measurement of surface macro texture in the Spanish Main Road Network is the MTD or Mean Texture Depth (PMT, Profundidad Media de Textura), obtained by means of the volumetric methods, in accordance with the standard UNE EN 13036-1:12010. The fact that it is a spot measurement that requires road closures makes it an expensive procedure as well as slow and dangerous. In addition to this, the test results are relatively sensitive to the operator, being the procedure not too suitable for systematic surveys. These are some of the reasons that have contributed to the development of texture meter laser devices that can be assembled on board of vehicles, circulating without interfering with the normal traffic flow and providing a parameter named the MPD (Mean Depth Profile). According to the standard UNE-EN ISO 13473-1:2006, it is possible to estimate the texture obtained by volumetric methods, with the parameter ETD (Estimated Texture Depth) through the equation: ETD=0,8 x MPD+0.2 In 2008 CEDEX conducted a study that correlated macro texture measures obtained by means of the volumetric method with such carried out by different laser texture meters. The equations yield a better relation between MPD and MTD were dependent on the measurement device used and were not linear equations type, as is it indicated in the standard, but exponential type equations. (Author) 6 refs.

Epitaxial hexagonal materials on IBAD-textured substrates

Energy Technology Data Exchange (ETDEWEB)

Matias, Vladimir; Yung, Christopher

2017-08-15

A multilayer structure including a hexagonal epitaxial layer, such as GaN or other group III-nitride (III-N) semiconductors, a <111> oriented textured layer, and a non-single crystal substrate, and methods for making the same. The textured layer has a crystalline alignment preferably formed by the ion-beam assisted deposition (IBAD) texturing process and can be biaxially aligned. The in-plane crystalline texture of the textured layer is sufficiently low to allow growth of high quality hexagonal material, but can still be significantly greater than the required in-plane crystalline texture of the hexagonal material. The IBAD process enables low-cost, large-area, flexible metal foil substrates to be used as potential alternatives to single-crystal sapphire and silicon for manufacture of electronic devices, enabling scaled-up roll-to-roll, sheet-to-sheet, or similar fabrication processes to be used. The user is able to choose a substrate for its mechanical and thermal properties, such as how well its coefficient of thermal expansion matches that of the hexagonal epitaxial layer, while choosing a textured layer that more closely lattice matches that layer.

Texture-dependent effects of pseudo-chewing sound on perceived food texture and evoked feelings in response to nursing care foods.

Science.gov (United States)

Endo, Hiroshi; Ino, Shuichi; Fujisaki, Waka

2017-09-01

Because chewing sounds influence perceived food textures, unpleasant textures of texture-modified diets might be improved by chewing sound modulation. Additionally, since inhomogeneous food properties increase perceived sensory intensity, the effects of chewing sound modulation might depend on inhomogeneity. This study examined the influences of texture inhomogeneity on the effects of chewing sound modulation. Three kinds of nursing care foods in two food process types (minced-/puréed-like foods for inhomogeneous/homogeneous texture respectively) were used as sample foods. A pseudo-chewing sound presentation system, using electromyogram signals, was used to modulate chewing sounds. Thirty healthy elderly participants participated in the experiment. In two conditions with and without the pseudo-chewing sound, participants rated the taste, texture, and evoked feelings in response to sample foods. The results showed that inhomogeneity strongly influenced the perception of food texture. Regarding the effects of the pseudo-chewing sound, taste was less influenced, the perceived food texture tended to change in the minced-like foods, and evoked feelings changed in both food process types. Though there were some food-dependent differences in the effects of the pseudo-chewing sound, the presentation of the pseudo-chewing sounds was more effective in foods with an inhomogeneous texture. In addition, it was shown that the pseudo-chewing sound might have positively influenced feelings. Copyright © 2017 Elsevier Ltd. All rights reserved.

Femtosecond laser surface texturing of titanium as a method to reduce the adhesion of Staphylococcus aureus and biofilm formation

Science.gov (United States)

Cunha, Alexandre; Elie, Anne-Marie; Plawinski, Laurent; Serro, Ana Paula; Botelho do Rego, Ana Maria; Almeida, Amélia; Urdaci, Maria C.; Durrieu, Marie-Christine; Vilar, Rui

2016-01-01

The aim of the present work was to investigate the possibility of using femtosecond laser surface texturing as a method to reduce the colonization of Grade 2 Titanium alloy surfaces by Staphylococcus aureus and the subsequent formation of biofilm. The laser treatments were carried out with a Yb:KYW chirped-pulse-regenerative amplification laser system with a central wavelength of 1030 nm and a pulse duration of 500 fs. Two types of surface textures, consisting of laser-induced periodic surface structures (LIPSS) and nanopillars, were produced. The topography, chemical composition and phase constitution of these surfaces were investigated by atomic force microscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, micro-Raman spectroscopy, and X-ray diffraction. Surface wettability was assessed by the sessile drop method using water and diiodomethane as testing liquids. The response of S. aureus put into contact with the laser treated surfaces in controlled conditions was investigated by epifluorescence microscopy and scanning electron microscopy 48 h after cell seeding. The results achieved show that the laser treatment reduces significantly the bacterial adhesion to the surface as well as biofilm formation as compared to a reference polished surfaces and suggest that femtosecond laser texturing is a simple and promising method for endowing dental and orthopedic titanium implants with antibacterial properties, reducing the risk of implant-associated infections without requiring immobilized antibacterial substances, nanoparticles or coatings.

Evaluation of color representation for texture analysis

NARCIS (Netherlands)

Verbrugge, R.; van den Broek, Egon; van Rikxoort, E.M.; Taatgen, N.; Schomaker, L.

2004-01-01

Since more than 50 years texture in image material is a topic of research. Hereby, color was ignored mostly. This study compares 70 different configurations for texture analysis, using four features. For the configurations we used: (i) a gray value texture descriptor: the co-occurrence matrix and a

Orbital selective spin-texture in a topological insulator

Energy Technology Data Exchange (ETDEWEB)

Singh, Bahadur, E-mail: bahadursingh24@gmail.com; Prasad, R. [Department of Physics, Indian Institute of Technology Kanpur, Kanpur 208016 (India)

2015-05-15

Three-dimensional topological insulators support a metallic non-trivial surface state with unique spin texture, where spin and momentum are locked perpendicular to each other. In this work, we investigate the orbital selective spin-texture associated with the topological surface states in Sb2Te{sub 3}, using the first principles calculations. Sb2Te{sub 3} is a strong topological insulator with a p-p type bulk band inversion at the Γ-point and supports a single topological metallic surface state with upper (lower) Dirac-cone has left (right) handed spin-texture. Here, we show that the topological surface state has an additional locking between the spin and orbitals, leading to an orbital selective spin-texture. The out-of-plane orbitals (p{sub z} orbitals) have an isotropic orbital texture for both the Dirac cones with an associated left and right handed spin-texture for the upper and lower Dirac cones, respectively. In contrast, the in-planar orbital texture (p{sub x} and p{sub y} projections) is tangential for the upper Dirac-cone and is radial for the lower Dirac-cone surface state. The dominant in-planar orbital texture in both the Dirac cones lead to a right handed orbital-selective spin-texture.

Heterogeneous patterns enhancing static and dynamic texture classification

International Nuclear Information System (INIS)

Silva, Núbia Rosa da; Martinez Bruno, Odemir

2013-01-01

Some mixtures, such as colloids like milk, blood, and gelatin, have homogeneous appearance when viewed with the naked eye, however, to observe them at the nanoscale is possible to understand the heterogeneity of its components. The same phenomenon can occur in pattern recognition in which it is possible to see heterogeneous patterns in texture images. However, current methods of texture analysis can not adequately describe such heterogeneous patterns. Common methods used by researchers analyse the image information in a global way, taking all its features in an integrated manner. Furthermore, multi-scale analysis verifies the patterns at different scales, but still preserving the homogeneous analysis. On the other hand various methods use textons to represent the texture, breaking texture down into its smallest unit. To tackle this problem, we propose a method to identify texture patterns not small as textons at distinct scales enhancing the separability among different types of texture. We find sub patterns of texture according to the scale and then group similar patterns for a more refined analysis. Tests were performed in four static texture databases and one dynamical one. Results show that our method provide better classification rate compared with conventional approaches both in static and in dynamic texture.

Does dental caries affect dental development in children and adolescents?

Science.gov (United States)

Dhamo, Brunilda; Elezi, Besiana; Kragt, Lea; Wolvius, Eppo B; Ongkosuwito, Edwin M

2018-01-01

Although a link between dietary changes, caries, and dental development has been observed, the literature provides little insight about this relationship. The aim of our study was to investigate the association between dental caries and dental development in a clinical sample of Albanian children and adolescents. In total, 118 children and adolescents, born between 1995 and 2004 and aged 6–15 years, were included. Dental caries in the deciduous dentition was assessed using the Decayed, Filled Teeth (dft) index and dental caries in the permanent dentition was assessed using the Decayed, Missing, Filled Teeth (DMFT) index. Dental development during the permanent dentition was determined using the Demirjian method. Linear and ordinal regression models were applied to analyze the associations of dental caries with dental age and developmental stages of each left mandibular tooth. Dental caries in the deciduous dentition, estimated as a median dft of 2.0 (90% range, 0.0–9.1), was significantly associated with lower dental age (β = -0.21; 90% CI: -0.29, -0.12) and with delayed development of the canine, both premolars, and the second molar. Untreated dental caries (dt) was associated with lower dental age (β = -0.19; 90% CI: -0.28, -0.10). Dental caries in the permanent dentition, estimated as a median DMFT of 1.0 (90% range, 0.0–8.0), was not significantly associated with dental age (β = 0.05; 90% CI: -0.04, 0.14). However, the DMFT was associated with the advanced stages of development of both premolars and the second molar. The untreated dental caries in the deciduous dentition delays the development of permanent teeth. PMID:29659350

Texture analyses of Sauropod dinosaur bones from Tendaguru

International Nuclear Information System (INIS)

Pyzalla, A.R.; Sander, P.M.; Hansen, A.; Ferreyro, R.; Yi, S.-B.; Stempniewicz, M.; Brokmeier, H.-G.

2006-01-01

The apatite texture of fossil Brachiosaurus brancai and Barosaurus africanus sauropod bones from the excavation site at Tendaguru, Tanzania, was characterized by neutron diffraction pole figures. The results obtained reveal predominantly -fibre textures of the apatite; the fibre direction coincides with the longitudinal direction of the long bones of the skeletons. Neutron pole figures further indicate that other texture types may also be present. Texture strength is similar to dinosaur tendons and contemporary turkey tendon studied by others. Variations of texture strength across the bone wall cross-sections are not significantly large

Dental formulations for the prevention of dental erosion

DEFF Research Database (Denmark)

2010-01-01

The invention relates to a therapeutic method for preventing and/or inhibiting dental erosion in a mammalian subject, and the provision of a dental care product for performing the method. The dental care product of the invention comprises a starch-degrading enzyme of E. C. 3.2.1.1, wherein said...... product comprises less than 1 wt.% ionic surfactant, and preferably is substantially free of endoprotease and/or lipase. The properties of the dental care product serve to prevent and/or inhibit dental erosion in a subject that typically results from repeated exposure of the patient's tooth surfaces...

Automatic Texture Optimization for 3D Urban Reconstruction

Directory of Open Access Journals (Sweden)

LI Ming

2017-03-01

Full Text Available In order to solve the problem of texture optimization in 3D city reconstruction by using multi-lens oblique images, the paper presents a method of seamless texture model reconstruction. At first, it corrects the radiation information of images by camera response functions and image dark channel. Then, according to the corresponding relevance between terrain triangular mesh surface model to image, implements occlusion detection by sparse triangulation method, and establishes the triangles' texture list of visible. Finally, combines with triangles' topology relationship in 3D triangular mesh surface model and means and variances of image, constructs a graph-cuts-based texture optimization algorithm under the framework of MRF(Markov random filed, to solve the discrete label problem of texture optimization selection and clustering, ensures the consistency of the adjacent triangles in texture mapping, achieves the seamless texture reconstruction of city. The experimental results verify the validity and superiority of our proposed method.

Patients' satisfaction with dental care provided by public dental ...

African Journals Online (AJOL)

Background: In Tanzania, patient satisfaction with dental services has received only minor attention. Objective: To assess patients' satisfaction with public dental health services in Dar es Salaam. Design: A cross-sectional study. Setting: Five public dental clinics randomly selected from a list of all the nine public dental ...

Description and Documentation of the Dental School Dental Delivery System.

Science.gov (United States)

Chase, Rosen and Wallace, Inc., Alexandria, VA.

A study was undertaken to describe and document the dental school dental delivery system using an integrated systems approach. In late 1976 and early 1977, a team of systems analysts and dental consultants visited three dental schools to observe the delivery of dental services and patient flow and to interview administrative staff and faculty.…

Dental anxiety and salivary cortisol levels before urgent dental care.

Science.gov (United States)

Kanegane, Kazue; Penha, Sibele S; Munhoz, Carolina D; Rocha, Rodney G

2009-12-01

Dental anxiety is still prevalent, despite advances in treatment, and affects the utilization of health care services. The purpose of this cross-sectional study was to determine if patients with different degrees of dental anxiety and pain undergoing emergency dental care have different stress reactions as measured by salivary cortisol. Seventy three patients completed the modified dental anxiety scale (MDAS), and described any previous dental traumatic experience. Their socio-demographic characteristics were also recorded. They also rated pain intensity on a 100 mm visual analogue scale (VAS). A saliva sample was collected before the procedure, and analyzed by enzyme immunoassay. Thirty patients were dentally anxious and forty one complained of pain. In this sample, dental anxiety was not related to gender, age, educational level and family income; however, a previous traumatic event was related to dental anxiety. There was no association between salivary cortisol concentrations and gender or dental anxiety. Patients with pain showed higher cortisol levels. When gathering patient information, the dentist should note patients' negative dental experiences in order to provide more effective, less traumatic treatment.

Characterization of a texture gradient in tantalum plate

International Nuclear Information System (INIS)

Wright, S.I.; Gray, G.T. III.

1994-01-01

Clark et al. have shown that significant texture gradients can be produced in rolled tantalum plate and that the strength of the gradient is dependent on the processing path. Texture gradients are often ignored because they are time consuming to characterize and add significant complexity to materials modeling. The variation in texture through the thickness of rolled materials is most commonly measured by sectioning samples to different depths through the thickness of the plate and then measuring the texture from these section planes by X-ray diffraction. A new technique based on automatic indexing of electron backscatter diffraction patterns in the scanning electron microscope enables spatially specific orientations to be measured in a practical manner. This technique allows spatial variations in texture to be measured directly enabling gradients in texture to be investigated in more detail than previously possible. This data can be used directly in coupled finite-element/polycrystal-plasticity models to simulate the effects of variations in texture on the plastic behavior of polycrystals. This work examines the variation in texture through the thickness of a tantalum plate and its resultant effect on the compressive deformation of samples prepared from the plate. The characterization of the texture gradient using the automatic point-by-point measurement technique mentioned above is described in detail. The effect of the gradient on the plastic response of through-thickness compression tests is also discussed

Effects of alkali on protein polymerization and textural characteristics of textured wheat protein.

Science.gov (United States)

Li, Ting; Guo, Xiao-Na; Zhu, Ke-Xue; Zhou, Hui-Ming

2018-01-15

The impact of alkali addition on the degree of gluten polymerization and textural characteristics of textured wheat protein was investigated. Results showed that the extrusion process increased the average molecular weight of gluten as evidenced by SDS-PAGE and SDS extractable protein. The addition of alkali not only promoted the degree of gluten polymerization, but also induced dehydroalanine-derived cross-linking. Alkali addition decreased the content of cystine and increased the contents of dehydroalanine and lanthionine. The obvious decrease of free SH showed that dehydroalanine-derived cross-linking was quantitatively less crucial than disulfide cross-linking. Furthermore, the protein cross-linking induced by alkali improved the texture properties of gluten extrudates. SEM analysis showed extrusion under alkaline condition conferred a more fibrous microstructure as a consequence of a compact gluten network. Copyright © 2017 Elsevier Ltd. All rights reserved.

Texture and Elastic Anisotropy of Mantle Olivine

Science.gov (United States)

Nikitin, A. N.; Ivankina, T. I.; Bourilitchev, D. E.; Klima, K.; Locajicek, T.; Pros, Z.

Eight olivine rock samples from different European regions were collected for neu- tron texture analyses and for P-wave velocity measurements by means of ultrasonic sounding at various confining pressures. The orientation distribution functions (ODFs) of olivine were determined and pole figures of the main crystallographic planes were calculated. The spatial P-wave velocity distributions were determined at confining pressures from 0.1 to 400 MPa and modelled from the olivine textures. In dependence upon the type of rock (xenolith or dunite) different behavior of both the P-wave veloc- ity distributions and the anisotropy coefficients with various confining pressures was observed. In order to explain the interdependence of elastic anisotropy and hydrostatic pressure, a model for polycrystalline olivine rocks was suggested, which considers the influence of the crystallographic and the mechanical textures on the elastic behaviour of the polycrystal. Since the olivine texture depends upon the active slip systems and the deformation temperature, neutron texture analyses enable us to estimate depth and thermodynamical conditions during texture formation.

A Novel Texture Classification Procedure by using Association Rules

Directory of Open Access Journals (Sweden)

L. Jaba Sheela

2008-11-01

Full Text Available Texture can be defined as a local statistical pattern of texture primitives in observer’s domain of interest. Texture classification aims to assign texture labels to unknown textures, according to training samples and classification rules. Association rules have been used in various applications during the past decades. Association rules capture both structural and statistical information, and automatically identify the structures that occur most frequently and relationships that have significant discriminative power. So, association rules can be adapted to capture frequently occurring local structures in textures. This paper describes the usage of association rules for texture classification problem. The performed experimental studies show the effectiveness of the association rules. The overall success rate is about 98%.

Textural features for radar image analysis

Science.gov (United States)

Shanmugan, K. S.; Narayanan, V.; Frost, V. S.; Stiles, J. A.; Holtzman, J. C.

1981-01-01

Texture is seen as an important spatial feature useful for identifying objects or regions of interest in an image. While textural features have been widely used in analyzing a variety of photographic images, they have not been used in processing radar images. A procedure for extracting a set of textural features for characterizing small areas in radar images is presented, and it is shown that these features can be used in classifying segments of radar images corresponding to different geological formations.

Texture analyses of Sauropod dinosaur bones from Tendaguru

Energy Technology Data Exchange (ETDEWEB)

Pyzalla, A.R. [TU Wien, Institute of Material Science and Technology, Karlsplatz 13-308, A-1040 Vienna (Austria) and MPI fuer Eisenforschung GmbH, Max-Planck-Str. 1, D-40237 Duesseldorf (Germany)]. E-mail: pyzalla@mpie.de; Sander, P.M. [University of Bonn, Institute of Palaeontology, Nusseallee, D-53115 Bonn (Germany); Hansen, A. [TU Clausthal, Institute of Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processingnd GKSS Research Centre Geesthacht GmbH, Geesthacht, Max-Planck-Str.1, D-21502 Geesthacht (Germany); Ferreyro, R. [TU Wien, Institute of Material Science and Technology, Karlsplatz 13-308, A-1040 Vienna (Austria); Yi, S.-B. [TU Clausthal, Institute of Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processingnd GKSS Research Centre Geesthacht GmbH, Geesthacht, Max-Planck-Str.1, D-21502 Geesthacht (Germany); MPI fuer Eisenforschung GmbH, Max-Planck-Str. 1, D-40237 Duesseldorf (Germany); Stempniewicz, M. [TU Wien, Institute of Material Science and Technology, Karlsplatz 13-308, A-1040 Vienna (Austria); Brokmeier, H.-G. [TU Clausthal, Institute of Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processingnd GKSS Research Centre Geesthacht GmbH, Geesthacht, Max-Planck-Str.1, D-21502 Geesthacht (Germany)

2006-11-10

The apatite texture of fossil Brachiosaurus brancai and Barosaurus africanus sauropod bones from the excavation site at Tendaguru, Tanzania, was characterized by neutron diffraction pole figures. The results obtained reveal predominantly <0 0 0 1>-fibre textures of the apatite; the fibre direction coincides with the longitudinal direction of the long bones of the skeletons. Neutron pole figures further indicate that other texture types may also be present. Texture strength is similar to dinosaur tendons and contemporary turkey tendon studied by others. Variations of texture strength across the bone wall cross-sections are not significantly large.

Awareness of dental implants among dental patients in Nigeria ...

African Journals Online (AJOL)

The aim of this study was to determine the level of awareness of dental implant in Nigerian patients and their willingness to choose dental implant as a tooth replacement option. A survey was conducted among patients presenting for dental treatment in 3 teaching hospitals and private dental clinics in 3 urban cities of ...

Rapidly 3D Texture Reconstruction Based on Oblique Photography

Directory of Open Access Journals (Sweden)

ZHANG Chunsen

2015-07-01

Full Text Available This paper proposes a city texture fast reconstruction method based on aerial tilt image for reconstruction of three-dimensional city model. Based on the photogrammetry and computer vision theory and using the city building digital surface model obtained by prior treatment, through collinear equation calculation geometric projection of object and image space, to obtain the three-dimensional information and texture information of the structure and through certain the optimal algorithm selecting the optimal texture on the surface of the object, realize automatic extraction of the building side texture and occlusion handling of the dense building texture. The real image texture reconstruction results show that: the method to the 3D city model texture reconstruction has the characteristics of high degree of automation, vivid effect and low cost and provides a means of effective implementation for rapid and widespread real texture rapid reconstruction of city 3D model.

Dental, Dental Hygiene, and Graduate Students' and Faculty Perspectives on Dental Hygienists' Professional Role and the Potential Contribution of a Peer Teaching Program.

Science.gov (United States)

McComas, Martha J; Inglehart, Marita R

2016-09-01

The changing role of dental hygienists deserves dental and dental hygiene educators' attention. The first aim of this survey study was to assess University of Michigan dental, dental hygiene, and graduate students' and faculty members' perceptions of dental hygienists' roles; their attitudes and behaviors related to clinical interactions between dental and dental hygiene students; and perceived benefits of engaging dental hygiene students as peer teachers for dental students. The second aim was to assess whether one group of dental students' experiences with dental hygiene student peer teaching affected their perceptions of the dental hygiene profession. Survey respondents were 57 dental hygiene students in all three years of the program (response rate 60% to 100%); 476 dental students in all four years (response rate 56% to 100%); 28 dental and dental hygiene graduate students (response rate 28%); and 67 dental and dental hygiene faculty members (response rate 56%). Compared to the other groups, dental students reported the lowest average number of services dental hygienists can provide (p≤0.001) and the lowest average number of patient groups for which dental hygienists can provide periodontal care (ppeer teaching (ppeer teaching. After experiencing dental hygiene student peer teaching, the dental students' perceptions of dental hygienists' roles, attitudes about clinical interactions with dental hygienists, and perceived benefits of dental hygiene student peer teachers improved and were more positive than the responses of their peers with no peer teaching experiences. These results suggest that dental hygiene student peer teaching may improve dental students' perceptions of dental hygienists' roles and attitudes about intraprofessional care.

Global crystallographic textures obtained by neutron and synchrotron radiation

International Nuclear Information System (INIS)

Brokmeier, Heinz-Guenter

2006-01-01

Global crystallographic textures belong to the main characteristic parameters of engineering materials. The global crystallographic texture is always the average texture of a well-defined sample volume which is representative to solve practical engineering problems. Thus a beam having a high penetration power is needed available as neutron or high energetic X-ray radiation. Texture type and texture sharpness are of great importance for materials properties such as the deep drawing behaviour, one of the basic techniques in many industries. Advantages and disadvantages of both radiations make them complementary for measuring crystallographic textures in a wide range of materials

Neotropics provide insights into the emergence of New World monkeys: New dental evidence from the late Oligocene of Peruvian Amazonia.

Science.gov (United States)

Marivaux, Laurent; Adnet, Sylvain; Altamirano-Sierra, Ali J; Boivin, Myriam; Pujos, François; Ramdarshan, Anusha; Salas-Gismondi, Rodolfo; Tejada-Lara, Julia V; Antoine, Pierre-Olivier

2016-08-01

Recent field efforts in Peruvian Amazonia (Contamana area, Loreto Department) have resulted in the discovery of a late Oligocene (ca. 26.5 Ma; Chambira Formation) fossil primate-bearing locality (CTA-61). In this paper, we analyze the primate material consisting of two isolated upper molars, the peculiar morphology of which allows us to describe a new medium-sized platyrrhine monkey: Canaanimico amazonensis gen. et sp. nov. In addition to the recent discovery of Perupithecus ucayaliensis, a primitive anthropoid taxon of African affinities from the alleged latest Eocene Santa Rosa locality (Peruvian Amazonia), the discovery of Canaanimico adds to the evidence that primates were well-established in the Amazonian Basin during the Paleogene. Our phylogenetic results based on dental evidence show that none of the early Miocene Patagonian taxa (Homunculus, Carlocebus, Soriacebus, Mazzonicebus, Dolichocebus, Tremacebus, and Chilecebus), the late Oligocene Bolivian Branisella, or the Peruvian Canaanimico, is nested within a crown platyrrhine clade. All these early taxa are closely related and considered here as stem Platyrrhini. Canaanimico is nested within the Patagonian Soriacebinae, and closely related to Soriacebus, thereby extending back the soriacebine lineage to 26.5 Ma. Given the limited dental evidence, it is difficult to assess if Canaanimico was engaged in a form of pitheciine-like seed predation as is observed in Soriacebus and Mazzonicebus, but dental microwear patterns recorded on one upper molar indicate that Canaanimico was possibly a fruit and hard-object eater. If Panamacebus, a recently discovered stem cebine from the early Miocene of Panama, indicates that the crown platyrrhine radiation was already well underway by the earliest Miocene, Canaanimico indicates in turn that the "homunculid" radiation (as a part of the stem radiation) was well underway by the late Oligocene. These new data suggest that the stem radiation likely occurred in the Neotropics

Texture analysis using angle dispersive neutron nuclear scattering

International Nuclear Information System (INIS)

Brokmeier, H.G.

1995-01-01

This paper describes in detail the method of texture determination using neutron diffraction. The main advantages of neutron diffraction arise from the high penetration depth for most materials which is a factor of 10 2 -10 4 higher than for X-ray diffraction. Consequently neutron diffraction is an efficient tool for the investigation of global textures and coarse grained materials. Moreover, the measurement of large sample volumes gives excellent grain statistics, allows the influence of texture inhomogeneities to be neglected and allows the measurement of complete pole figures even of minority phases. A number of examples show the application of neutron diffraction to measure textures of metals, alloys, composites, intermetallic compounds and rocks. A detailed description of TEX-2 the neutron texture diffractometer at GKSS Research Centre is given which is completed by a comparison to other neutron texture diffractometers. (orig.) [de

Dental Workforce Availability and Dental Services Utilization in Appalachia: A Geospatial Analysis

Science.gov (United States)

Feng, Xue; Sambamoorthi, Usha; Wiener, R. Constance

2016-01-01

Objectives There is considerable variation in dental services utilization across Appalachian counties, and a plausible explanation is that individuals in some geographical areas do not utilize dental care due to dental workforce shortage. We conducted an ecological study on dental workforce availability and dental services utilization in Appalachia. Methods We derived county-level (n = 364) data on demographic, socio-economic characteristics and dental services utilization in Appalachia from the 2010 Behavioral Risk Factor Surveillance System (BRFSS) using person-level data. We obtained county-level dental workforce availability and physician-to-population ratio estimates from Area Health Resource File, and linked them to the county-level BRFSS data. The dependent variable was the proportion using dental services within the last year in each county (ranging from 16.6% to 91.0%). We described the association between dental workforce availability and dental services utilization using ordinary least squares regression and spatial regression techniques. Spatial analyses consisted of bivariate Local Indicators of Spatial Association (LISA) and geographically weighted regression (GWR). Results Bivariate LISA showed that counties in the central and southern Appalachian regions had significant (p dental workforce availability, low percent dental services utilization). GWR revealed considerable local variations in the association between dental utilization and dental workforce availability. In the multivariate GWR models, 8.5% (t-statistics >1.96) and 13.45% (t-statistics >1.96) of counties showed positive and statistically significant relationships between the dental services utilization and workforce availability of dentists and dental hygienists, respectively. Conclusions Dental workforce availability was associated with dental services utilization in the Appalachian region; however, this association was not statistically significant in all counties. The findings suggest

TEXTURE ANALYSIS OF SPELT WHEAT BREAD

Directory of Open Access Journals (Sweden)

Magdaléna Lacko - Bartošová

2013-02-01

Full Text Available The bread quality is considerably dependent on the texture characteristic of bread crumb. Texture analysis is primarily concerned with the evaluation of mechanical characteristics where a material is subjected to a controlled force from which a deformation curve of its response is generated. It is an objective physical examination of baked products and gives direct information on the product quality, oppositely to dough rheology tests what are inform on the baking suitability of the flour, as raw material. This is why the texture analysis is one of the most helpful analytical methods of the product development. In the framework of our research during the years 2008 – 2009 were analyzed selected indicators of bread crumb for texture quality of three Triticum spelta L. cultivars – Oberkulmer Rotkorn, Rubiota and Franckenkorn grown in an ecological system at the locality of Dolna Malanta near Nitra. The bread texture quality was evaluated on texture analyzer TA.XT Plus and expressed as crumb firmness (N, stiffness (N.mm-1 and relative elasticity (%.Our research proved that all selected indicators were significantly influenced by the year of growing and variety. The most soft bread was measured in Rubiota, whereas bread crumb samples from Franckenkorn were the most firm and stiff. Relative elasticity confirmed that the lowest firmness and stiffness was found in Rubiota bread. The spelt grain can be a good source for making bread flour, but is closely dependent on choice of spelt variety.

Some distinguishing characteristics of contour and texture phenomena in images

Science.gov (United States)

Jobson, Daniel J.

1992-01-01

The development of generalized contour/texture discrimination techniques is a central element necessary for machine vision recognition and interpretation of arbitrary images. Here, the visual perception of texture, selected studies of texture analysis in machine vision, and diverse small samples of contour and texture are all used to provide insights into the fundamental characteristics of contour and texture. From these, an experimental discrimination scheme is developed and tested on a battery of natural images. The visual perception of texture defined fine texture as a subclass which is interpreted as shading and is distinct from coarse figural similarity textures. Also, perception defined the smallest scale for contour/texture discrimination as eight to nine visual acuity units. Three contour/texture discrimination parameters were found to be moderately successful for this scale discrimination: (1) lightness change in a blurred version of the image, (2) change in lightness change in the original image, and (3) percent change in edge counts relative to local maximum.

AUTOMATIC TEXTURE RECONSTRUCTION OF 3D CITY MODEL FROM OBLIQUE IMAGES

Directory of Open Access Journals (Sweden)

J. Kang

2016-06-01

Full Text Available In recent years, the photorealistic 3D city models are increasingly important in various geospatial applications related to virtual city tourism, 3D GIS, urban planning, real-estate management. Besides the acquisition of high-precision 3D geometric data, texture reconstruction is also a crucial step for generating high-quality and visually realistic 3D models. However, most of the texture reconstruction approaches are probably leading to texture fragmentation and memory inefficiency. In this paper, we introduce an automatic framework of texture reconstruction to generate textures from oblique images for photorealistic visualization. Our approach include three major steps as follows: mesh parameterization, texture atlas generation and texture blending. Firstly, mesh parameterization procedure referring to mesh segmentation and mesh unfolding is performed to reduce geometric distortion in the process of mapping 2D texture to 3D model. Secondly, in the texture atlas generation step, the texture of each segmented region in texture domain is reconstructed from all visible images with exterior orientation and interior orientation parameters. Thirdly, to avoid color discontinuities at boundaries between texture regions, the final texture map is generated by blending texture maps from several corresponding images. We evaluated our texture reconstruction framework on a dataset of a city. The resulting mesh model can get textured by created texture without resampling. Experiment results show that our method can effectively mitigate the occurrence of texture fragmentation. It is demonstrated that the proposed framework is effective and useful for automatic texture reconstruction of 3D city model.

Danish dental education:

DEFF Research Database (Denmark)

Moore, Rod

1985-01-01

The effects of Danish cultural traditions on dental education in Denmark are described, as well as the system's current structure and developing issues. Some Danish ideas for future exports of dental education programs and dental personnel are also discussed.......The effects of Danish cultural traditions on dental education in Denmark are described, as well as the system's current structure and developing issues. Some Danish ideas for future exports of dental education programs and dental personnel are also discussed....

Expanded function allied dental personnel and dental practice productivity and efficiency.

Science.gov (United States)

Beazoglou, Tryfon J; Chen, Lei; Lazar, Vickie F; Brown, L Jackson; Ray, Subhash C; Heffley, Dennis R; Berg, Rob; Bailit, Howard L

2012-08-01

This study examined the impact of expanded function allied dental personnel on the productivity and efficiency of general dental practices. Detailed practice financial and clinical data were obtained from a convenience sample of 154 general dental practices in Colorado. In this state, expanded function dental assistants can provide a wide range of reversible dental services/procedures, and dental hygienists can give local anesthesia. The survey identified practices that currently use expanded function allied dental personnel and the specific services/procedures delegated. Practice productivity was measured using patient visits, gross billings, and net income. Practice efficiency was assessed using a multivariate linear program, Data Envelopment Analysis. Sixty-four percent of the practices were found to use expanded function allied dental personnel, and on average they delegated 31.4 percent of delegatable services/procedures. Practices that used expanded function allied dental personnel treated more patients and had higher gross billings and net incomes than those practices that did not; the more services they delegated, the higher was the practice's productivity and efficiency. The effective use of expanded function allied dental personnel has the potential to substantially expand the capacity of general dental practices to treat more patients and to generate higher incomes for dental practices.

Radiographic Assessment of Dental Maturation in Children With Dental Agenesis.

Science.gov (United States)

Medina, Aida Carolina; Pozo, Rodrigo Del; de Cedres, Lucila Blanco

Dental agenesis is the most common developmental anomaly in humans, frequently associated with disorders in dental development and maturation. The purpose of this study is to determine radiographic variations in dental maturation in a group of Venezuelan children with dental agenesis. 1,188 panoramic radiographs, from healthy patients ages 5 to 12 years old were studied for agenesis of permanent teeth. Dental maturation was assessed by relative eruption and dental age according to Nolla, comparing children affected with dental agenesis to a stratified control group selected from the same population, excluding children with premature loss of primary teeth in the left quadrants and unclear radiographs. Descriptive analysis, and differences between means and medians (Student t test, Kruskall-Wallis p=0.05) were performed. Medians for Nolla stages were similar between groups, with delay in tooth formation in the agenesis group for second molars (p<0.05) and maxillary lateral incisors and second premolars. Dental age was significantly underestimated for both groups, -0.89 (±0.78) for the control group and -1.20 (±0.95) for the study group. Tooth eruption was similar between groups. Dental age was significantly delayed in Venezuelan children with dental agenesis, with variable significance for tooth formation of studied teeth.

On texture formation of chromium electrodeposits

DEFF Research Database (Denmark)

Nielsen, Christian Bergenstof; Leisner, Peter; Horsewell, Andy

1998-01-01

The microstructure, texture and hardness of electrodeposited hard, direct current (DC) chromium and pulsed reversed chromium has been investigated. These investigations suggest that the growth and texture of hard chromium is controlled by inhibition processes and reactions. Further, it has been...

Cloud and surface textural features in polar regions

Science.gov (United States)

Welch, Ronald M.; Kuo, Kwo-Sen; Sengupta, Sailes K.

1990-01-01

The study examines the textural signatures of clouds, ice-covered mountains, solid and broken sea ice and floes, and open water. The textural features are computed from sum and difference histogram and gray-level difference vector statistics defined at various pixel displacement distances derived from Landsat multispectral scanner data. Polar cloudiness, snow-covered mountainous regions, solid sea ice, glaciers, and open water have distinguishable texture features. This suggests that textural measures can be successfully applied to the detection of clouds over snow-covered mountains, an ability of considerable importance for the modeling of snow-melt runoff. However, broken stratocumulus cloud decks and thin cirrus over broken sea ice remain difficult to distinguish texturally. It is concluded that even with high spatial resolution imagery, it may not be possible to distinguish broken stratocumulus and thin clouds from sea ice in the marginal ice zone using the visible channel textural features alone.

Dental pain and dental treatment of young children attending the general dental service.

Science.gov (United States)

Milsom, K M; Tickle, M; Blinkhorn, A S

2002-03-09

The objective was to examine the relationship between dental pain (and its sequelae), and the extent of restorative care provided for primary molars, amongst children who regularly attend a general dental practitioner. A retrospective review of the clinical case notes of 677 children with caries who attended 50 general dental practitioners on a regular basis. Analyses were performed at the subject level. Logistic regression models were fitted for the dependent variables whether or not pain, a dental extraction for pain or sepsis and a course of antibiotics was recorded, after taking into account the proportion of carious teeth that were restored, the total number of carious teeth, the age caries was first recorded, gender and the clustering of the subjects within dental practices. Almost half of the children in the study (48%) were recorded as having at least one episode of pain. Total decay experience in the primary molars was a significant predictor of pain, extraction due to pain or sepsis and prescription of antibiotics. There was no significant association between the proportion of carious teeth restored and each of the three dependent variables. For those children who regularly attend their general dental practitioner and who have decay in their primary molars, dental pain is a common finding. Total decay experience in primary molars is the principal predictor of pain, extraction due to pain and the need for antibiotics, whilst the level of restorative care in the primary dentition is less important. In order to reduce the incidence of dental pain in young children, effective methods of preventing caries at the individual and public health levels need to be expanded.

Texture and wettability of metallic lotus leaves

Science.gov (United States)

Frankiewicz, C.; Attinger, D.

2016-02-01

Superhydrophobic surfaces with the self-cleaning behavior of lotus leaves are sought for drag reduction and phase change heat transfer applications. These superrepellent surfaces have traditionally been fabricated by random or deterministic texturing of a hydrophobic material. Recently, superrepellent surfaces have also been made from hydrophilic materials, by deterministic texturing using photolithography, without low-surface energy coating. Here, we show that hydrophilic materials can also be made superrepellent to water by chemical texturing, a stochastic rather than deterministic process. These metallic surfaces are the first analog of lotus leaves, in terms of wettability, texture and repellency. A mechanistic model is also proposed to describe the influence of multiple tiers of roughness on wettability and repellency. This demonstrated ability to make hydrophilic materials superrepellent without deterministic structuring or additional coatings opens the way to large scale and robust manufacturing of superrepellent surfaces.Superhydrophobic surfaces with the self-cleaning behavior of lotus leaves are sought for drag reduction and phase change heat transfer applications. These superrepellent surfaces have traditionally been fabricated by random or deterministic texturing of a hydrophobic material. Recently, superrepellent surfaces have also been made from hydrophilic materials, by deterministic texturing using photolithography, without low-surface energy coating. Here, we show that hydrophilic materials can also be made superrepellent to water by chemical texturing, a stochastic rather than deterministic process. These metallic surfaces are the first analog of lotus leaves, in terms of wettability, texture and repellency. A mechanistic model is also proposed to describe the influence of multiple tiers of roughness on wettability and repellency. This demonstrated ability to make hydrophilic materials superrepellent without deterministic structuring or additional

About Dental Amalgam Fillings

Science.gov (United States)

... and Medical Procedures Dental Devices Dental Amalgam About Dental Amalgam Fillings Share Tweet Linkedin Pin it More ... should I have my fillings removed? What is dental amalgam? Dental amalgam is a dental filling material ...

Postoperative dental morbidity in children following dental treatment under general anesthesia.

Science.gov (United States)

Hu, Yu-Hsuan; Tsai, Aileen; Ou-Yang, Li-Wei; Chuang, Li-Chuan; Chang, Pei-Ching

2018-05-10

General anesthesia has been widely used in pediatric dentistry in recent years. However, there remain concerns about potential postoperative dental morbidity. The goal of this study was to identify the frequency of postoperative dental morbidity and factors associated with such morbidity in children. From March 2012 to February 2013, physically and mentally healthy children receiving dental treatment under general anesthesia at the Department of Pediatric Dentistry of the Chang Gung Memorial Hospital in Taiwan were recruited. This was a prospective and observational study with different time evaluations based on structured questionnaires and interviews. Information on the patient demographics, anesthesia and dental treatment performed, and postoperative dental morbidity was collected and analyzed. Correlations between the study variables and postoperative morbidity were analyzed based on the Pearson's chi-square test. Correlations between the study variables and the scale of postoperative dental pain were analyzed using the Mann-Whitney U test. Fifty-six pediatric patients participated in this study, with an average age of 3.34 ± 1.66 years (ranging from 1 to 8 years). Eighty-two percent of study participants reported postoperative dental pain, and 23% experienced postoperative dental bleeding. Both dental pain and bleeding subsided 3 days after the surgery. Dental pain was significantly associated with the total number of teeth treated, while dental bleeding, with the presence of teeth extracted. Patients' gender, age, preoperative dental pain, ASA classification, anesthesia time, and duration of the operation were not associated with postoperative dental morbidity. Dental pain was a more common postoperative dental morbidity than bleeding. The periods when parents reported more pain in their children were the day of the operation (immediately after the procedure) followed by 1 day and 3 days after the treatment.

A quasi-in-situ EBSD observation of the transformation from rolling texture to recrystallization texture in V-4Cr-4Ti alloy

Energy Technology Data Exchange (ETDEWEB)

Peng, Lixia [Institute of Materials Research, China Academy of Engineering Physics, Jiangyou, Sichuan Province 621908 (China); Li, Xiongwei [Institute of Metal Research, China Academy of Sciences, 72 Wenhua Road, Shenyang 110016 (China); Fan, Zhijian [Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics, Mianyang, Sichuan Province 621900 (China); Jiang, Chunli; Zhou, Ping [Institute of Materials Research, China Academy of Engineering Physics, Jiangyou, Sichuan Province 621908 (China); Lai, Xinchun, E-mail: laixinchun@caep.cn [Institute of Materials Research, China Academy of Engineering Physics, Jiangyou, Sichuan Province 621908 (China)

2017-04-15

Recrystallization texture evolution of rolled V-4Cr-4Ti alloy has been investigated by quasi-in-situ EBSD (electron back-scattering diffraction) method. Concurrently, the precipitates were characterized by SEM (Scanning Electron Microscopy). It was found that both the initial rolling textures and the distribution of the precipitates affected the formation of the recrystallization texture. It was revealed that the texture transformations of (558) 〈110〉 + (665) 〈110〉 to (334) 〈483〉 + (665) 〈1 1 2.4〉 were possibly attributed to the selective drag induced by the sparsely dispersed Ti-rich precipitates. While the densely distributed Ti-rich precipitates were responsible for the randomized recrystallization texture. Finally, when the precipitates were absent, the orientation changes from (112) 〈110〉 and (558) 〈110〉 to (111) 〈112〉 and (001) <110> to (001) <520> were observed. - Highlights: • Micro recrystallization texture evolution in V-4Cr-4Ti alloys is reported for the first time. • The volume fraction of Ti-rich precipitates has significant effect on the recrystallization texture evolution. • The dissolution of the Ti-rich precipitates above 1100 °C induces the strengthening of (111) <112> texture.

Dental fluorosis and dental caries prevalence among 12 and 15 ...

African Journals Online (AJOL)

Background: Fluoride is a double edged sword. The assessment of dental caries and fluorosis in endemic fluoride areas will facilitate in assessing the relation between fluoride concentrations in water with dental caries, dental fluorosis simultaneously. Aim: The objective of the following study is to assess the dental caries ...

Texture design for light touch perception

NARCIS (Netherlands)

Zhang, S.; Zeng, X.; Matthews, D.T.A.; Igartua, A.; Rodriguez Vidal, E.; Fortes, J. Contreras; Van Der Heide, E.

This study focused on active light touch with predefined textures specially-designed for tactile perception. The counter-body material is stainless steel sheet. Three geometric structures (grid, crater and groove) were fabricated by pulsed laser surface texturing. A total number of twenty volunteers

Perceived Dentist and Dental Hygienist Task Distribution After Dental and Dental Hygiene Students' Team Intervention

NARCIS (Netherlands)

Reinders, Jan J.; Krijnen, Wim P.; Stegenga, Boudewijn; van der Schans, Cees P.

2017-01-01

Attitudes of dental students regarding the provision of treatment tend to be dentist-centered; however, facilitating mixed student group formation could change such perceptions. The aim of this study was to investigate the perceived scope of practice of dental and dental hygiene students and whether

Perceived dentist and dental hygienist task distribution after dental and dental hygiene students' team intervention

NARCIS (Netherlands)

Reinders, Jan J; Krijnen, Wim P; Stegenga, Boudewijn; van der Schans, Cees P

Attitudes of dental students regarding the provision of treatment tend to be dentist-centered; however, facilitating mixed student group formation could change such perceptions. The aim of this study was to investigate the perceived scope of practice of dental and dental hygiene students and whether

75 FR 16511 - Pentron Clinical Technologies, a Wholly-Owned Subsidiary of Kerr Dental/Sybron Dental...

Science.gov (United States)

2010-04-01

... produce dental materials such as dental prosthetics, dental composites, dental impressions, dental... materials such as dental prosthetics, dental composites, dental impressions, dental adhesives, and other... Technologies, a Wholly-Owned Subsidiary of Kerr Dental/Sybron Dental Specialities, Formally Known as Customedix...

Synthesis of nano-textured biocompatible scaffolds from chicken eggshells

International Nuclear Information System (INIS)

Asghar, Waseem; Ilyas, Azhar; Sankaran, Jeyantt; Wan Yuan; Iqbal, Samir M; Kim, Young-Tae

2012-01-01

Cell adhesion, morphology and growth are influenced by surface topography at nano and micrometer scales. Nano-textured surfaces are prepared using photolithography, plasma etching and long polymer chemical etching which are cost prohibitive and require specialized equipment. This article demonstrates a simple approach to synthesize nano-textured scaffolds from chicken eggshells. Varieties of pattern are made on the eggshells like micro-needle forests and nanopores, giving very uniform nano-textures to the surfaces. The surfaces are characterized for chemical composition and crystal phase. The novel patterns are transferred to PDMS surfaces and the nano-textured PDMS surfaces are used to study the effect of texturing on human fibroblast cell growth and attachment. The effects of surface topographies, along with laminin coating on cell cultures, are also studied. We find an exciting phenomenon that the initial seeding density of the fibroblast cells affects the influence of the nano-texturing on cell growth. These nano-textured surfaces give 16 times more fibroblast growth when compared to flat PDMS surfaces. The novel nano-textured patterns also double the laminin adsorption on PDMS. (paper)

Visual texture perception via graph-based semi-supervised learning

Science.gov (United States)

Zhang, Qin; Dong, Junyu; Zhong, Guoqiang

2018-04-01

Perceptual features, for example direction, contrast and repetitiveness, are important visual factors for human to perceive a texture. However, it needs to perform psychophysical experiment to quantify these perceptual features' scale, which requires a large amount of human labor and time. This paper focuses on the task of obtaining perceptual features' scale of textures by small number of textures with perceptual scales through a rating psychophysical experiment (what we call labeled textures) and a mass of unlabeled textures. This is the scenario that the semi-supervised learning is naturally suitable for. This is meaningful for texture perception research, and really helpful for the perceptual texture database expansion. A graph-based semi-supervised learning method called random multi-graphs, RMG for short, is proposed to deal with this task. We evaluate different kinds of features including LBP, Gabor, and a kind of unsupervised deep features extracted by a PCA-based deep network. The experimental results show that our method can achieve satisfactory effects no matter what kind of texture features are used.

Strings, texture, and inflation

International Nuclear Information System (INIS)

Hodges, H.M.; Primack, J.R.

1991-01-01

We examine mechanisms, several of which are proposed here, to generate structure formation, or to just add large-scale features, through either gauged or global cosmic strings or global texture, within the framework of inflation. We first explore the possibility that strings or texture form if there is no coupling between the topological theory and the inflaton or spacetime curvature, via (1) quantum creation, and (2) a sufficiently high reheat temperature. In addition, we examine the prospects for the inflaton field itself to generate strings or texture. Then, models with the string/texture field coupled to the curvature, and an equivalent model with coupling to the inflaton field, are considered in detail. The requirement that inflationary density fluctuations are not so large as to conflict with observations leads to a number of constraints on model parameters. We find that strings of relevance for structure formation can form in the absence of coupling to the inflaton or curvature through the process of quantum creation, but only if the strings are strongly type I, or if they are global strings. If formed after reheating, naturalness suggests that gauged cosmic strings correspond to a type-I superconductor. Similarly, gauged strings formed during inflation via conformal coupling ξ=1/6 to the spacetime curvature (in a model suggested by Yokoyama in order to evade the millisecond pulsar constraint on cosmic strings) are expected to be strongly type I

Texture Analysis Using Rényi’s Generalized Entropies

NARCIS (Netherlands)

Grigorescu, S.E.; Petkov, N.

2003-01-01

We propose a texture analysis method based on Rényi’s generalized entropies. The method aims at identifying texels in regular textures by searching for the smallest window through which the minimum number of different visual patterns is observed when moving the window over a given texture. The

Surface roughness and morphology of dental nanocomposites polished by four different procedures evaluated by a multifractal approach

Energy Technology Data Exchange (ETDEWEB)

Ţălu, Ştefan, E-mail: stefan_ta@yahoo.com [Technical University of Cluj-Napoca, Faculty of Mechanical Engineering, Department of AET, Discipline of Descriptive Geometry and Engineering Graphics, 103-105 B-dul Muncii St., Cluj-Napoca 400641, Cluj (Romania); Stach, Sebastian, E-mail: sebastian.stach@us.edu.pl [University of Silesia, Faculty of Computer Science and Materials Science, Institute of Informatics, Department of Biomedical Computer Systems, Będzińska 39, 41-205 Sosnowiec (Poland); Lainović, Tijana, E-mail: tijana.lainovic@gmail.com [University of Novi Sad, Faculty of Medicine, School of Dentistry, Hajduk Veljkova 3, 21000 Novi Sad (Serbia); Vilotić, Marko, E-mail: markovil@uns.ac.rs [University of Novi Sad, Faculty of Technical Sciences, Department for Production Engineering, Trg Dositeja Obradovića 6, 21000 Novi Sad (Serbia); Blažić, Larisa, E-mail: larisa.blazic@gmail.com [University of Novi Sad, Faculty of Medicine, School of Dentistry, Clinic of Dentistry of Vojvodina, Department of Restorative Dentistry and Endodontics, Hajduk Veljkova 3, 21000 Novi Sad (Serbia); Alb, Sandu Florin, E-mail: albflorin@yahoo.com [“Iuliu Haţieganu” University of Medicine and Pharmacy, Faculty of Dentistry, Department of Periodontology, 8 Victor Babeş St., 400012 Cluj-Napoca (Romania); Kakaš, Damir, E-mail: kakasdam@uns.ac.rs [University of Novi Sad, Faculty of Technical Sciences, Department for Production Engineering, Trg Dositeja Obradovića 6, 21000 Novi Sad (Serbia)

2015-03-01

Graphical abstract: - Highlights: • Multifractals are good indicators of polished dental composites 3-D surface structure. • The nanofilled composite had superior 3-D surface properties than the nanohybrid one. • Composite polishing with diamond paste created improved 3-D multifractal structure. • Recommendation: polish the composite with diamond paste if using the one-step tool. • Multifractal analysis could become essential in designing new dental surfaces. - Abstract: The objective of this study was to determine the effect of different dental polishing methods on surface texture parameters of dental nanocomposites. The 3-D surface morphology was investigated by atomic force microscopy (AFM) and multifractal analysis. Two representative dental resin-based nanocomposites were investigated: a nanofilled and a nanohybrid composite. The samples were polished by two dental polishing protocols using multi-step and one-step system. Both protocols were then followed by diamond paste polishing. The 3-D surface roughness of samples was studied by AFM on square areas of topography on the 80 × 80 μm{sup 2} scanning area. The multifractal spectrum theory based on computational algorithms was applied for AFM data and multifractal spectra were calculated. The generalized dimension D{sub q} and the singularity spectrum f(α) provided quantitative values that characterize the local scale properties of dental nanocomposites polished by four different dental polishing protocols at nanometer scale. The results showed that the larger the spectrum width Δα (Δα = α{sub max} − α{sub min}) of the multifractal spectra f(α), the more non-uniform was the surface morphology. Also, the 3-D surface topography was described by statistical parameters, according to ISO 25178-2:2012. The 3-D surface of samples had a multifractal nature. Nanofilled composite had lower values of height parameters than nanohybrid composites, due to its composition. Multi-step polishing protocol

Surface roughness and morphology of dental nanocomposites polished by four different procedures evaluated by a multifractal approach

International Nuclear Information System (INIS)

Ţălu, Ştefan; Stach, Sebastian; Lainović, Tijana; Vilotić, Marko; Blažić, Larisa; Alb, Sandu Florin; Kakaš, Damir

2015-01-01

Graphical abstract: - Highlights: • Multifractals are good indicators of polished dental composites 3-D surface structure. • The nanofilled composite had superior 3-D surface properties than the nanohybrid one. • Composite polishing with diamond paste created improved 3-D multifractal structure. • Recommendation: polish the composite with diamond paste if using the one-step tool. • Multifractal analysis could become essential in designing new dental surfaces. - Abstract: The objective of this study was to determine the effect of different dental polishing methods on surface texture parameters of dental nanocomposites. The 3-D surface morphology was investigated by atomic force microscopy (AFM) and multifractal analysis. Two representative dental resin-based nanocomposites were investigated: a nanofilled and a nanohybrid composite. The samples were polished by two dental polishing protocols using multi-step and one-step system. Both protocols were then followed by diamond paste polishing. The 3-D surface roughness of samples was studied by AFM on square areas of topography on the 80 × 80 μm 2 scanning area. The multifractal spectrum theory based on computational algorithms was applied for AFM data and multifractal spectra were calculated. The generalized dimension D q and the singularity spectrum f(α) provided quantitative values that characterize the local scale properties of dental nanocomposites polished by four different dental polishing protocols at nanometer scale. The results showed that the larger the spectrum width Δα (Δα = α max − α min ) of the multifractal spectra f(α), the more non-uniform was the surface morphology. Also, the 3-D surface topography was described by statistical parameters, according to ISO 25178-2:2012. The 3-D surface of samples had a multifractal nature. Nanofilled composite had lower values of height parameters than nanohybrid composites, due to its composition. Multi-step polishing protocol created a better

Texture of fermion mass matrices in partially unified theories

International Nuclear Information System (INIS)

Dutta, B.; Texas Univ., Austin, TX; Nandi, S.; Texas Univ., Austin, TX

1996-01-01

We investigate the texture of fermion mass matrices in theories with partial unification (for example, SU(2) L x SU(2) R x SU(4) c ) at a scale of ∼ 10 12 GeV. Starting with the low energy values of the masses and the mixing angles, we find only two viable textures with at most four texture zeros. One of these corresponds to a somewhat modified Fritzsch textures. A theoretical derivation of these textures leads to new interesting relations among the masses and the mixing angles. 13 refs

Magnetic resonance tomography and dental radiology (Dental-MRT)

International Nuclear Information System (INIS)

Gahleitner, A.; Wien Univ.; Solar, P.; Ertl, L.; Nasel, C.; Homolka, P.; Youssefzadeh, S.; Schick, S.

1999-01-01

Purpose: To demonstrate the usefulness of Dental-MRT for imaging of anatomic and pathologic conditions of the mandible and maxilla. Methods: Seven healthy volunteers, 5 patients with pulpitis, 9 patients with dentigerous cysts, 5 patients after tooth transplantation and 12 patients with atrophic mandibles were evaluated. Studies of the jaws using axial T1- and T2-weighted gradient echo and spin echo sequences in 2D and 3D technique have been to performed. The acquired images were reconstructed with a standard dental software package on a workstation as panoramic and cross sectional views of the mandible or maxilla. Results: The entire maxilla and mandibula, teeth, dental pulp and the content of the mandibular canal were well depicted. Patients with inflammatory disease of the pulp chamber demonstrate bone marrow edema in the periapical region. Dentigerous cysts and their relation to the surrounding structures are clearly shown. After contrast media application marked enhancement of the dental pulp can be found. Conclusion: Dental-MRT provides a valuable tool for visualization and detection of dental diseases. (orig.) [de

Neutrino mass textures with maximal CP violation

International Nuclear Information System (INIS)

Aizawa, Ichiro; Kitabayashi, Teruyuki; Yasue, Masaki

2005-01-01

We show three types of neutrino mass textures, which give maximal CP violation as well as maximal atmospheric neutrino mixing. These textures are described by six real mass parameters: one specified by two complex flavor neutrino masses and two constrained ones and the others specified by three complex flavor neutrino masses. In each texture, we calculate mixing angles and masses, which are consistent with observed data, as well as Majorana CP phases

Burnout, depression and suicidal ideation in dental and dental hygiene students.

Science.gov (United States)

Deeb, George R; Braun, Sarah; Carrico, Caroline; Kinser, Patricia; Laskin, Daniel; Golob Deeb, Janina

2018-02-01

The aim of this study was to assess the relationship between burnout, depressive symptoms and suicidal ideation in dental and dental hygiene students and to evaluate the influence of gender, programme type and year of study. Third- and fourth-year dental (DS) and first- and second-year hygiene students (DHS) completed the Patient Health Questionnaire (PHQ-9) and an abbreviated Maslach Burnout Inventory online as measures of depressive symptoms/suicidality and burnout, respectively. The statistical analyses included summary statistics and tests for intergroup comparisons (chi-square) to evaluate the influence of gender, programme type (DHS or DS) and year of study. Correlations between depression, suicidality and burnout were also conducted. A total of 32 dental hygiene and 119 dental students participated. 40% of the dental and 38% of the hygiene students met criteria for burnout. No differences were found between years or between programmes. Nine per cent of both dental and hygiene students were above the cut-off for moderate depressive symptoms, but there were no statistical differences between the third- and fourth-year dental and the first- and second-year hygiene students. Six per cent of the dental and 9% of the dental hygiene students were above the cut-off for clinically significant suicidal ideation, but there were no statistical differences between dental and hygiene students. There were no differences noted in the dental students based on gender for any of the measures. Depression was significantly associated with all three subscales of burnout. Suicidal ideation was only significantly related to the lack of personal accomplishment subscale of burnout. These findings suggest the need for introducing preventive measures for such affective states in dental and dental hygiene training programmes. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Adaptive Texture Synthesis for Large Scale City Modeling

Science.gov (United States)

Despine, G.; Colleu, T.

2015-02-01

Large scale city models textured with aerial images are well suited for bird-eye navigation but generally the image resolution does not allow pedestrian navigation. One solution to face this problem is to use high resolution terrestrial photos but it requires huge amount of manual work to remove occlusions. Another solution is to synthesize generic textures with a set of procedural rules and elementary patterns like bricks, roof tiles, doors and windows. This solution may give realistic textures but with no correlation to the ground truth. Instead of using pure procedural modelling we present a method to extract information from aerial images and adapt the texture synthesis to each building. We describe a workflow allowing the user to drive the information extraction and to select the appropriate texture patterns. We also emphasize the importance to organize the knowledge about elementary pattern in a texture catalogue allowing attaching physical information, semantic attributes and to execute selection requests. Roofs are processed according to the detected building material. Façades are first described in terms of principal colours, then opening positions are detected and some window features are computed. These features allow selecting the most appropriate patterns from the texture catalogue. We experimented this workflow on two samples with 20 cm and 5 cm resolution images. The roof texture synthesis and opening detection were successfully conducted on hundreds of buildings. The window characterization is still sensitive to the distortions inherent to the projection of aerial images onto the facades.

Extreme Compression and Modeling of Bidirectional Texture Function

Czech Academy of Sciences Publication Activity Database

Haindl, Michal; Filip, Jiří

2007-01-01

Roč. 29, č. 10 (2007), s. 1859-1865 ISSN 0162-8828 R&D Projects: GA AV ČR 1ET400750407; GA MŠk 1M0572; GA AV ČR IAA2075302 EU Projects: European Commission(XE) 507752 - MUSCLE Grant - others:GA MŠk(CZ) 2C06019 Institutional research plan: CEZ:AV0Z10750506 Keywords : Rough texture * 3D texture * BTF * texture synthesis * texture modeling * data compression Subject RIV: BD - Theory of Information Impact factor: 3.579, year: 2007 http://doi.ieeecomputersociety.org/10.1109/TPAMI.2007.1139

Exploring Dental Providers' Workflow in an Electronic Dental Record Environment.

Science.gov (United States)

Schwei, Kelsey M; Cooper, Ryan; Mahnke, Andrea N; Ye, Zhan; Acharya, Amit

2016-01-01

A workflow is defined as a predefined set of work steps and partial ordering of these steps in any environment to achieve the expected outcome. Few studies have investigated the workflow of providers in a dental office. It is important to understand the interaction of dental providers with the existing technologies at point of care to assess breakdown in the workflow which could contribute to better technology designs. The study objective was to assess electronic dental record (EDR) workflows using time and motion methodology in order to identify breakdowns and opportunities for process improvement. A time and motion methodology was used to study the human-computer interaction and workflow of dental providers with an EDR in four dental centers at a large healthcare organization. A data collection tool was developed to capture the workflow of dental providers and staff while they interacted with an EDR during initial, planned, and emergency patient visits, and at the front desk. Qualitative and quantitative analysis was conducted on the observational data. Breakdowns in workflow were identified while posting charges, viewing radiographs, e-prescribing, and interacting with patient scheduler. EDR interaction time was significantly different between dentists and dental assistants (6:20 min vs. 10:57 min, p = 0.013) and between dentists and dental hygienists (6:20 min vs. 9:36 min, p = 0.003). On average, a dentist spent far less time than dental assistants and dental hygienists in data recording within the EDR.

Through-process modelling of texture and anisotropy in AA5182

Science.gov (United States)

Crumbach, M.; Neumann, L.; Goerdeler, M.; Aretz, H.; Gottstein, G.; Kopp, R.

2006-07-01

A through-process texture and anisotropy prediction for AA5182 sheet production from hot rolling through cold rolling and annealing is reported. Thermo-mechanical process data predicted by the finite element method (FEM) package T-Pack based on the software LARSTRAN were fed into a combination of physics based microstructure models for deformation texture (GIA), work hardening (3IVM), nucleation texture (ReNuc), and recrystallization texture (StaRT). The final simulated sheet texture was fed into a FEM simulation of cup drawing employing a new concept of interactively updated texture based yield locus predictions. The modelling results of texture development and anisotropy were compared to experimental data. The applicability to other alloys and processes is discussed.

Extraction of Homogeneous Fine-Grained Texture Segments in Visual Images

Czech Academy of Sciences Publication Activity Database

Golcev, A.; Gritsenko, V.; Húsek, Dušan

2017-01-01

Roč. 27, č. 5 (2017), s. 447-477 ISSN 1210-0552 Institutional support: RVO:67985807 Keywords : texture feature * texture window * homogeneous fine-grained texture segment * extraction of texture segment * texture segmentation * ”float” coding method Subject RIV: IN - Informatics, Computer Science OBOR OECD: Computer sciences, information science, bioinformathics (hardware development to be 2.2, social aspect to be 5.8) Impact factor: 0.394, year: 2016

Shape-Tailored Features and their Application to Texture Segmentation

KAUST Repository

Khan, Naeemullah

2014-04-01

Texture Segmentation is one of the most challenging areas of computer vision. One reason for this difficulty is the huge variety and variability of textures occurring in real world, making it very difficult to quantitatively study textures. One of the key tools used for texture segmentation is local invariant descriptors. Texture consists of textons, the basic building block of textures, that may vary by small nuisances like illumination variation, deformations, and noise. Local invariant descriptors are robust to these nuisances making them beneficial for texture segmentation. However, grouping dense descriptors directly for segmentation presents a problem: existing descriptors aggregate data from neighborhoods that may contain different textured regions, making descriptors from these neighborhoods difficult to group, leading to significant errors in segmentation. This work addresses this issue by proposing dense local descriptors, called Shape-Tailored Features, which are tailored to an arbitrarily shaped region, aggregating data only within the region of interest. Since the segmentation, i.e., the regions, are not known a-priori, we propose a joint problem for Shape-Tailored Features and the regions. We present a framework based on variational methods. Extensive experiments on a new large texture dataset, which we introduce, show that the joint approach with Shape-Tailored Features leads to better segmentations over the non-joint non Shape-Tailored approach, and the method out-performs existing state-of-the-art.

Dental caries experience and use of dental services among Brazilian prisoners.

Science.gov (United States)

Cavalcanti, Alessandro Leite; Rodrigues, Iris Sant Anna Araujo; de Melo Silveira, Ingrid Thays; de Oliveira, Thaliny Batista Sarmento; de Almeida Pinto, Magaly Suenya; Xavier, Alidianne Fabia Cabral; de Castro, Ricardo Dias; Padilha, Wilton Wilney Nascimento

2014-11-25

This ross-sectional study involving 127 male prisoners evaluates the use of dental services and dental caries among Brazilian inmates. Data were collected by interview and clinical examination. Sociodemographic and sentencing information as well as use of dental services, self-reported dental morbidity, self-perception, and oral health impacts were investigated. The mean DMFT index value was 19.72. Of the components, the decayed component showed the highest mean value (11.06 ± 5.37). Statistically significant association was found between DMFTs with values from 22 to 32 and oral health satisfaction (p = 0.002), difficulty speaking (p = 0.024), shame of talking (p = 0.004) and smiling (p dental services, 80% had their last dental appointment less than one year ago, with most visits occurring in prison (80%), with restorative treatment (32%), followed by dental pain (26.4%), being the main reasons for such appointments. Most prisoners used dental services provided by the prison. Although restorative treatment has been the main reason for the use of dental services, "decayed" and "missing" components contributed to the high mean DMFT index.

Diagnostic methods for dental caries used by private dental ...

African Journals Online (AJOL)

Objectives: This study aimed to investigate the preference profiles of various types of diagnostic tools and methods used by private dental practitioners in Ankara for detecting dental caries. Methods: Private dental practitioners, in five districts of Ankara, were provided with questionnaires comprising demographic ...

TOPICAL REVIEW Textured silicon nitride: processing and anisotropic properties

Directory of Open Access Journals (Sweden)

Xinwen Zhu and Yoshio Sakka

2008-01-01

Full Text Available Textured silicon nitride (Si3N4 has been intensively studied over the past 15 years because of its use for achieving its superthermal and mechanical properties. In this review we present the fundamental aspects of the processing and anisotropic properties of textured Si3N4, with emphasis on the anisotropic and abnormal grain growth of β-Si3N4, texture structure and texture analysis, processing methods and anisotropic properties. On the basis of the texturing mechanisms, the processing methods described in this article have been classified into two types: hot-working (HW and templated grain growth (TGG. The HW method includes the hot-pressing, hot-forging and sinter-forging techniques, and the TGG method includes the cold-pressing, extrusion, tape-casting and strong magnetic field alignment techniques for β-Si3N4 seed crystals. Each processing technique is thoroughly discussed in terms of theoretical models and experimental data, including the texturing mechanisms and the factors affecting texture development. Also, methods of synthesizing the rodlike β-Si3N4 single crystals are presented. Various anisotropic properties of textured Si3 N4 and their origins are thoroughly described and discussed, such as hardness, elastic modulus, bending strength, fracture toughness, fracture energy, creep behavior, tribological and wear behavior, erosion behavior, contact damage behavior and thermal conductivity. Models are analyzed to determine the thermal anisotropy by considering the intrinsic thermal anisotropy, degree of orientation and various microstructure factors. Textured porous Si3N4 with a unique microstructure composed of oriented elongated β-Si3N4 and anisotropic pores is also described for the first time, with emphasis on its unique mechanical and thermal-mechanical properties. Moreover, as an important related material, textured α-Sialon is also reviewed, because the presence of elongated α-Sialon grains allows the production of textured �

Dental students' part-time jobs in dental practices in the Netherlands.

Science.gov (United States)

Poorterman, J H G; Dikkes, B T; Brand, H S

2010-08-01

In the Netherlands, the Individual Health Care Professions Act (IHCP Act) allows dental students, amongst other non-qualified individuals, to work under certain conditions in a dental practice. The aim of the study was to determine how many dental students have part-time employment in dental practice and which professional tasks they carry out. We also asked the dental students their opinion about the IHCP Act. All the enrolled dental students at the Academic Centre for Dentistry Amsterdam (ACTA) in the Netherlands received a questionnaire by e-mail. Within 1 month, two reminders were sent. The response was 44% (427 students). Of the responding students, 71% had paid employment in addition to their study. Twenty-five per cent of all students worked in a dental practice, usually 8 h a week. Study year and age were positively related to working part-time in dental practice. Activities frequently performed were providing chair side assistance, giving oral hygiene instruction, fluoride applications, scaling and root planning. The self-reported knowledge about the IHCP Act was positively related to study year and working in a dental practice. Hardly any information about the requirements of the IHCP Act with regard to delegation of tasks was provided by the employer. Many Dutch dental students work in a dental practice, taking over a variety of tasks. Although the self-reported knowledge about the IHCP Act was relatively high, many dental students expressed the need for more detailed information about the legal aspects of their tasks.

Tribological Behavior of Laser Textured Hot Stamping Dies

Directory of Open Access Journals (Sweden)

Andre Shihomatsu

2016-01-01

Full Text Available Hot stamping of high strength steels has been continuously developed in the automotive industry to improve mechanical properties and surface quality of stamped components. One of the main challenges faced by researchers and technicians is to improve stamping dies lifetime by reducing the wear caused by high pressures and temperatures present during the process. This paper analyzes the laser texturing of hot stamping dies and discusses how different surfaces textures influence the lubrication and wear mechanisms. To this purpose, experimental tests and numerical simulation were carried out to define the die region to be texturized and to characterize the textured surface topography before and after hot stamping tests with a 3D surface profilometer and scanning electron microscopy. Results showed that laser texturing influences the lubrication at the interface die-hot sheet and improves die lifetime. In this work, the best texture presented dimples with the highest diameter, depth, and spacing, with the surface topography and dimples morphology practically preserved after the hot stamping tests.

Neutronographic Texture Analysis of Zirconium Based Alloys

International Nuclear Information System (INIS)

Kruz'elová, M; Vratislav, S; Kalvoda, L; Dlouhá, M

2012-01-01

Neutron diffraction is a very powerful tool in texture analysis of zirconium based alloys used in nuclear technique. Textures of five samples (two rolled sheets and three tubes) were investigated by using basal pole figures, inversion pole figures, and ODF distribution function. The texture measurement was performed at diffractometer KSN2 on the Laboratory of Neutron Diffraction, Department of Solid State Engineering, Faculty of Nuclear Sciences and Physical Engineering, CTU in Prague. Procedures for studying textures with thermal neutrons and procedures for obtaining texture parameters (direct and inverse pole figures, three dimensional orientation distribution function) are also described. Observed data were processed by software packages HEXAL and GSAS. Our results can be summarized as follows: i) All samples of zirconium alloys show the distribution of middle area into two maxima in basal pole figures. This is caused by alloying elements. A characteristic split of the basal pole maxima tilted from the normal direction toward the transverse direction can be observed for all samples, ii) Sheet samples prefer orientation of planes (100) and (110) perpendicular to rolling direction and orientation of planes (002) perpendicular to normal direction, iii) Basal planes of tubes are oriented parallel to tube axis, meanwhile (100) planes are oriented perpendicular to tube axis. Level of resulting texture and maxima position is different for tubes and for sheets. The obtained results are characteristic for zirconium based alloys.

Determining the direction of tooth grinding: an in vitro study

NARCIS (Netherlands)

ten Berge, F.; te Poel, J.; Ranjitkar, S.; Kaidonis, J.A.; Lobbezoo, F.; Hughes, T.E.; Townsend, G.C.

2012-01-01

The analysis of microwear patterns, including scratch types and widths, has enabled reconstruction of the dietary habits and lifestyles of prehistoric and modern humans. The aim of this in vitro study was to determine whether an assessment of microwear features of experimental scratches placed on

Dental Fear and Avoidance in Treatment Seekers at a Large, Urban Dental Clinic.

Science.gov (United States)

Heyman, Richard E; Slep, Amy M Smith; White-Ajmani, Mandi; Bulling, Lisanne; Zickgraf, Hana F; Franklin, Martin E; Wolff, Mark S

2016-01-01

The prevalence and correlates of dental fear have been studied in representative population studies, but not in patients presenting for dental treatment. We hypothesized that dental fear among patients presenting at a large, urban college of dentistry would be similar to that of the population (e.g. 11% high dental fear, 17% to 35% moderate or higher fear) and that fear would be associated with avoidance of routine dental care, increased use of urgent dental care and poor oral health. Participants were 1070 consecutive patients at a large, urban dental care center. All patients completed a clinical interview, including demographics, medical history, dental history and presenting concerns, and behavioral health history. Patients were also asked to rate their dental anxiety/fear on a 1 (none) to 10 (high) scale. Over 20% of patients reported elevated anxiety/fear, of which 12.30% reported moderate and 8.75% high fear. Severity of dental anxiety/fear was strongly related to the likelihood of avoiding dental services in the past and related to myriad presenting problems. As hypothesized, the prevalence of moderate or higher fear in dental patients was considerable and closely matched that found in general population surveys. Thus, the 'dental home' is an ideal location to treat clinically significant dental anxiety/fear.

ADAPTIVE TEXTURE SYNTHESIS FOR LARGE SCALE CITY MODELING

Directory of Open Access Journals (Sweden)

G. Despine

2015-02-01

Full Text Available Large scale city models textured with aerial images are well suited for bird-eye navigation but generally the image resolution does not allow pedestrian navigation. One solution to face this problem is to use high resolution terrestrial photos but it requires huge amount of manual work to remove occlusions. Another solution is to synthesize generic textures with a set of procedural rules and elementary patterns like bricks, roof tiles, doors and windows. This solution may give realistic textures but with no correlation to the ground truth. Instead of using pure procedural modelling we present a method to extract information from aerial images and adapt the texture synthesis to each building. We describe a workflow allowing the user to drive the information extraction and to select the appropriate texture patterns. We also emphasize the importance to organize the knowledge about elementary pattern in a texture catalogue allowing attaching physical information, semantic attributes and to execute selection requests. Roofs are processed according to the detected building material. Façades are first described in terms of principal colours, then opening positions are detected and some window features are computed. These features allow selecting the most appropriate patterns from the texture catalogue. We experimented this workflow on two samples with 20 cm and 5 cm resolution images. The roof texture synthesis and opening detection were successfully conducted on hundreds of buildings. The window characterization is still sensitive to the distortions inherent to the projection of aerial images onto the facades.

Electrochemically grown rough-textured nanowires

International Nuclear Information System (INIS)

Tyagi, Pawan; Postetter, David; Saragnese, Daniel; Papadakis, Stergios J.; Gracias, David H.

2010-01-01

Nanowires with a rough surface texture show unusual electronic, optical, and chemical properties; however, there are only a few existing methods for producing these nanowires. Here, we describe two methods for growing both free standing and lithographically patterned gold (Au) nanowires with a rough surface texture. The first strategy is based on the deposition of nanowires from a silver (Ag)-Au plating solution mixture that precipitates an Ag-Au cyanide complex during electrodeposition at low current densities. This complex disperses in the plating solution, thereby altering the nanowire growth to yield a rough surface texture. These nanowires are mass produced in alumina membranes. The second strategy produces long and rough Au nanowires on lithographically patternable nickel edge templates with corrugations formed by partial etching. These rough nanowires can be easily arrayed and integrated with microscale devices.

Exploring Dental Providers’ Workflow in an Electronic Dental Record Environment

Science.gov (United States)

Schwei, Kelsey M; Cooper, Ryan; Mahnke, Andrea N.; Ye, Zhan

2016-01-01

Summary Background A workflow is defined as a predefined set of work steps and partial ordering of these steps in any environment to achieve the expected outcome. Few studies have investigated the workflow of providers in a dental office. It is important to understand the interaction of dental providers with the existing technologies at point of care to assess breakdown in the workflow which could contribute to better technology designs. Objective The study objective was to assess electronic dental record (EDR) workflows using time and motion methodology in order to identify breakdowns and opportunities for process improvement. Methods A time and motion methodology was used to study the human-computer interaction and workflow of dental providers with an EDR in four dental centers at a large healthcare organization. A data collection tool was developed to capture the workflow of dental providers and staff while they interacted with an EDR during initial, planned, and emergency patient visits, and at the front desk. Qualitative and quantitative analysis was conducted on the observational data. Results Breakdowns in workflow were identified while posting charges, viewing radiographs, e-prescribing, and interacting with patient scheduler. EDR interaction time was significantly different between dentists and dental assistants (6:20 min vs. 10:57 min, p = 0.013) and between dentists and dental hygienists (6:20 min vs. 9:36 min, p = 0.003). Conclusions On average, a dentist spent far less time than dental assistants and dental hygienists in data recording within the EDR. PMID:27437058

Forest Classification Based on Forest texture in Northwest Yunnan Province

Science.gov (United States)

Wang, Jinliang; Gao, Yan; Wang, Xiaohua; Fu, Lei

2014-03-01

Forest texture is an intrinsic characteristic and an important visual feature of a forest ecological system. Full utilization of forest texture will be a great help in increasing the accuracy of forest classification based on remote sensed data. Taking Shangri-La as a study area, forest classification has been based on the texture. The results show that: (1) From the texture abundance, texture boundary, entropy as well as visual interpretation, the combination of Grayscale-gradient co-occurrence matrix and wavelet transformation is much better than either one of both ways of forest texture information extraction; (2) During the forest texture information extraction, the size of the texture-suitable window determined by the semi-variogram method depends on the forest type (evergreen broadleaf forest is 3×3, deciduous broadleaf forest is 5×5, etc.). (3)While classifying forest based on forest texture information, the texture factor assembly differs among forests: Variance Heterogeneity and Correlation should be selected when the window is between 3×3 and 5×5 Mean, Correlation, and Entropy should be used when the window in the range of 7×7 to 19×19 and Correlation, Second Moment, and Variance should be used when the range is larger than 21×21.

Forest Classification Based on Forest texture in Northwest Yunnan Province

International Nuclear Information System (INIS)

Wang, Jinliang; Gao, Yan; Fu, Lei; Wang, Xiaohua

2014-01-01

Forest texture is an intrinsic characteristic and an important visual feature of a forest ecological system. Full utilization of forest texture will be a great help in increasing the accuracy of forest classification based on remote sensed data. Taking Shangri-La as a study area, forest classification has been based on the texture. The results show that: (1) From the texture abundance, texture boundary, entropy as well as visual interpretation, the combination of Grayscale-gradient co-occurrence matrix and wavelet transformation is much better than either one of both ways of forest texture information extraction; (2) During the forest texture information extraction, the size of the texture-suitable window determined by the semi-variogram method depends on the forest type (evergreen broadleaf forest is 3×3, deciduous broadleaf forest is 5×5, etc.). (3)While classifying forest based on forest texture information, the texture factor assembly differs among forests: Variance Heterogeneity and Correlation should be selected when the window is between 3×3 and 5×5; Mean, Correlation, and Entropy should be used when the window in the range of 7×7 to 19×19; and Correlation, Second Moment, and Variance should be used when the range is larger than 21×21

Dental anomalies and dental age assessment in treated children with acute lymphoblastic leukemia.

Science.gov (United States)

Khojastepour, L; Zareifar, S; Ebrahimi, M

2014-01-01

This cross sectional study was performed to evaluate dental ages and incidence of dental anomalies in children treated for acute lymphoblastic leukemia (ALL). A total of 25 ALL patient who passed at least 2 years of chemotherapy and 25 healthy sex and age matched children were evaluated. Dental age as well as dental anomalies in shape, size, number, and structure was recorded based on their panoramic radiographies which were taken for dental purposes. The number of dental anomalies significantly increased in ALL treated children. Seven ALL cases (28%) in compression to only one (4%) in control group had at least one dental anomaly. However, there was neither statistically significant differences between the mean of dental (p=0.32) and chronologic age (p=0.12) in both groups, nor between dental age of cases and control group (p=0.62).The age at the onset of treatment as well as treatment durations has not affected dental age and the incidence of dental anomalies significantly (pdental anomaly. Dental age, maturity, and development process however seems to be independent from chemotherapy.

Shape and Texture Based Classification of Fish Species

DEFF Research Database (Denmark)

Larsen, Rasmus; Ólafsdóttir, Hildur; Ersbøll, Bjarne Kjær

2009-01-01

In this paper we conduct a case study of ¯sh species classi- fication based on shape and texture. We consider three fish species: cod, haddock, and whiting. We derive shape and texture features from an appearance model of a set of training data. The fish in the training images were manual outlined......, and a few features including the eye and backbone contour were also annotated. From these annotations an optimal MDL curve correspondence and a subsequent image registration were derived. We have analyzed a series of shape and texture and combined shape and texture modes of variation for their ability...

Associations Between PET Textural Features and GLUT1 Expression, and the Prognostic Significance of Textural Features in Lung Adenocarcinoma.

Science.gov (United States)

Koh, Young Wha; Park, Seong Yong; Hyun, Seung Hyup; Lee, Su Jin

2018-02-01

We evaluated the association between positron emission tomography (PET) textural features and glucose transporter 1 (GLUT1) expression level and further investigated the prognostic significance of textural features in lung adenocarcinoma. We evaluated 105 adenocarcinoma patients. We extracted texture-based PET parameters of primary tumors. Conventional PET parameters were also measured. The relationships between PET parameters and GLUT1 expression levels were evaluated. The association between PET parameters and overall survival (OS) was assessed using Cox's proportional hazard regression models. In terms of PET textural features, tumors expressing high levels of GLUT1 exhibited significantly lower coarseness, contrast, complexity, and strength, but significantly higher busyness. On univariate analysis, the metabolic tumor volume, total lesion glycolysis, contrast, busyness, complexity, and strength were significant predictors of OS. Multivariate analysis showed that lower complexity (HR=2.017, 95%CI=1.032-3.942, p=0.040) was independently associated with poorer survival. PET textural features may aid risk stratification in lung adenocarcinoma patients. Copyright© 2018, International Institute of Anticancer Research (Dr. George J. Delinasios), All rights reserved.

Line Laser and Triple Laser Quantification of the Difference in International Roughness Index between Textured and Non-Textured Strips

Science.gov (United States)

2017-07-01

Practitioners have often wondered whether, during ride measurement with inertial devices, the motion of the laser through pavement texture introduces non representative values of international roughness index (IRI), particularly in certain textures. ...

Phosphorous gettering in acidic textured multicrystalline solar cells

Energy Technology Data Exchange (ETDEWEB)

Montesdeoca-Santana, A. [Departamento de Fisica Basica, Universidad de La Laguna (ULL), Avenida Astrofisico Francisco Sanchez 2, 38206 La Laguna, S/C de Tenerife (Spain); Fraunhofer Institut fuer Solare Energiesysteme ISE, Laboratory and Servicecenter Gelsenkirchen, Auf der Reihe 2, 45884 Gelsenkirchen (Germany); Jimenez-Rodriguez, E.; Diaz-Herrera, B.; Hernandez-Rodriguez, C. [Departamento de Fisica Basica, Universidad de La Laguna (ULL), Avenida Astrofisico Francisco Sanchez 2, 38206 La Laguna, S/C de Tenerife (Spain); Gonzalez-Diaz, B. [Departamento de Fisica Basica, Universidad de La Laguna (ULL), Avenida Astrofisico Francisco Sanchez 2, 38206 La Laguna, S/C de Tenerife (Spain); Departamento de Energia Fotovoltaica, Instituto Tecnologico y de Energias Renovables. Poligono Industrial de Granadilla s/n, 38600 San Isidro-Granadilla de Abona, S/C de Tenerife (Spain); Rinio, M.; Borchert, D. [Fraunhofer Institut fuer Solare Energiesysteme ISE, Laboratory and Servicecenter Gelsenkirchen, Auf der Reihe 2, 45884 Gelsenkirchen (Germany); Guerrero-Lemus, R. [Departamento de Fisica Basica, Universidad de La Laguna (ULL), Avenida Astrofisico Francisco Sanchez 2, 38206 La Laguna, S/C de Tenerife (Spain); Fundacion de Estudios de Economia Aplicada, Catedra Focus-Abengoa, Jorge Juan 46, 28001 Madrid (Spain)

2011-03-15

The influence of phosphorus gettering is studied in this work applied to an acidic textured multicrystalline silicon substrate. The texturization was achieved with an HF/HNO{sub 3} solution leading to nanostructures on the silicon surface. It has been demonstrated in previous works that this textured surface decreases the reflectance on the solar cell and increases the surface area improving the photon collection and enhancing the short circuit current. The present study investigates the effect on the minority carrier lifetime of the phosphorous diffusion when it is carried out on this textured surface. The lifetime is measured by means microwave photoconductance decay and quasi steady state phototoconductance devices. The diffused textured wafers are used to fabricate solar cells and their electrical parameters are analyzed. (copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

SHAPE FROM TEXTURE USING LOCALLY SCALED POINT PROCESSES

Directory of Open Access Journals (Sweden)

Eva-Maria Didden

2015-09-01

Full Text Available Shape from texture refers to the extraction of 3D information from 2D images with irregular texture. This paper introduces a statistical framework to learn shape from texture where convex texture elements in a 2D image are represented through a point process. In a first step, the 2D image is preprocessed to generate a probability map corresponding to an estimate of the unnormalized intensity of the latent point process underlying the texture elements. The latent point process is subsequently inferred from the probability map in a non-parametric, model free manner. Finally, the 3D information is extracted from the point pattern by applying a locally scaled point process model where the local scaling function represents the deformation caused by the projection of a 3D surface onto a 2D image.

Shape-Tailored Features and their Application to Texture Segmentation

KAUST Repository

Khan, Naeemullah

2014-01-01

Texture Segmentation is one of the most challenging areas of computer vision. One reason for this difficulty is the huge variety and variability of textures occurring in real world, making it very difficult to quantitatively study textures. One

Dental negligence.

Science.gov (United States)

Tay, C S

2000-02-01

Medical and dental errors and negligence are again in the spotlight in recent news report. Dead because of doctor's bad handwriting Prescribing drug overdoses Germ-infested soap pumps--infections in hospitals This articles explains dental negligence including dental duty of care and the standard of care expected of dentists in relation to the Bolam principle.

Recent trends in dental visits and private dental insurance, 1989 and 1999.

Science.gov (United States)

Wall, Thomas P; Brown, L Jackson

2003-05-01

This article describes recent trends in dental visits and private dental insurance in the United States. This study is based on the analyses of data regarding dental visits and private dental insurance among the population 2 years of age or older from the 1989 and 1999 National Health Interview Surveys. Overall, the percentage of the population with a dental visit rose from 57.2 percent in 1989 to 64.1 percent in 1999, while the percentage with private dental insurance fell from 40.5 percent to 35.2 percent. Although a higher percentage of people with private dental insurance reported having a dental visit than did those without private dental insurance in both years, the increase from 1989 to 1999 in the percentage of those with a visit was larger among the uninsured. If this trend persists, a smaller portion of practicing dentist's clientele will be insured. This may affect demand for services, as well as front office operations.

Evaluation of texture differences among varieties of cooked quinoa

Science.gov (United States)

Texture is one of the most significant factors for consumers’ experience of foods. Texture difference of cooked quinoa among thirteen different varieties was studied. Correlations between the texture and seed composition, seed characteristics, cooking qualities, flour pasting properties and flour th...

On the origin of recrystallization textures

Indian Academy of Sciences (India)

Unknown

rival theories of evolution of recrystallization textures i.e. oriented nucleation (ON) and oriented growth (OG) has been under dispute. In the ON model, it has been argued that a higher frequency of the special orientation. (grains) than random occur, thus accounting for the texture. In the OG model, it has been argued that the.

Medicaid Adult Dental Benefits Increase Use Of Dental Care, But Impact Of Expansion On Dental Services Use Was Mixed.

Science.gov (United States)

Singhal, Astha; Damiano, Peter; Sabik, Lindsay

2017-04-01

Dental coverage for adult enrollees is an optional benefit under Medicaid. Thirty-one states and the District of Columbia have expanded eligibility for Medicaid under the Affordable Care Act. Millions of low-income adults have gained health care coverage and, in states offering dental benefits, oral health coverage as well. Using data for 2010 and 2014 from the Behavioral Risk Factor Surveillance System, we examined the impact of Medicaid adult dental coverage and eligibility expansions on low-income adults' use of dental care. We found that low-income adults in states that provided dental benefits beyond emergency-only coverage were more likely to have had a dental visit in the past year, compared to low-income adults in states without such benefits. Among states that provided dental benefits and expanded their Medicaid program, regression-based estimates suggest that childless adults had a significant increase (1.8 percentage points) in the likelihood of having had a dental visit, while parents had a significant decline (8.1 percentage points). One possible explanation for the disparity is that after expansion, newly enrolled childless adults might have exhausted the limited dental provider capacity that was available to parents before expansion. Additional policy-level efforts may be needed to expand the dental care delivery system's capacity. Project HOPE—The People-to-People Health Foundation, Inc.

Control of crystallographic texture and surface morphology of Pt/Tio2 templates for enhanced PZT thin film texture.

Science.gov (United States)

Fox, Austin J; Drawl, Bill; Fox, Glen R; Gibbons, Brady J; Trolier-McKinstry, Susan

2015-01-01

Optimized processing conditions for Pt/TiO2/SiO2/Si templating electrodes were investigated. These electrodes are used to obtain [111] textured thin film lead zirconate titanate (Pb[ZrxTi1-x ]O3 0 ≤ x ≤ 1) (PZT). Titanium deposited by dc magnetron sputtering yields [0001] texture on a thermally oxidized Si wafer. It was found that by optimizing deposition time, pressure, power, and the chamber pre-conditioning, the Ti texture could be maximized while maintaining low surface roughness. When oxidized, titanium yields [100]-oriented rutile. This seed layer has as low as a 4.6% lattice mismatch with [111] Pt; thus, it is possible to achieve strongly oriented [111] Pt. The quality of the orientation and surface roughness of the TiO2 and the Ti directly affect the achievable Pt texture and surface morphology. A transition between optimal crystallographic texture and the smoothest templating surface occurs at approximately 30 nm of original Ti thickness (45 nm TiO2). This corresponds to 0.5 nm (2 nm for TiO2) rms roughness as determined by atomic force microscopy and a full-width at half-maximum (FWHM) of the rocking curve 0002 (200) peak of 5.5/spl degrees/ (3.1/spl degrees/ for TiO2). A Pb[Zr0.52Ti 0.48]O3 layer was deposited and shown to template from the textured Pt electrode, with a maximum [111] Lotgering factor of 87% and a minimum 111 FWHM of 2.4/spl degrees/ at approximately 30 nm of original Ti.

Texture and deformation mechanism of yttrium

International Nuclear Information System (INIS)

Adamesku, R.A.; Grebenkin, S.V.; Stepanenko, A.V.

1992-01-01

X-ray pole figure analysis was applied to study texture and deformation mechanism in pure and commercial polycrystalline yttrium on cold working. It was found that in cast yttrium the texture manifected itself weakly enough both for pure and commercial metal. Analysis of the data obtained made it possible to assert that cold deformation of pure yttrium in the initial stage occurred mainly by slip the role of which decreased at strains higher than 36%. The texture of heavily deformed commercial yttrium contained two components, these were an 'ideal' basic orientation and an axial one with the angle of inclination about 20 deg. Twinning mechanism was revealed to be also possible in commercial yttrium

Predictors of dental avoidance among Australian adults with different levels of dental anxiety.

Science.gov (United States)

Armfield, Jason M; Ketting, Manon

2015-09-01

It has been proposed that avoidance of dental visits might be the main determinant of poor oral health outcomes in people with high dental anxiety (HDA). This study aimed to determine the predictors of dental avoidance among people with HDA and also whether these predictors differed from those found in people with lower dental anxiety (LDA). Study participants (n = 596; response rate = 41.1%) comprised a random cross-sectional sample of the Australian adult population who completed a mailed self-complete questionnaire containing items relating to the use and accessibility of dental services, trust in dental professionals, dental anxiety, dental experiences, self-perceived oral health, vulnerability-related perceptions of visiting the dentist, and psychological health. Multiple imputation was used to replace missing values and statistically significant variables in bivariate analyses were entered into a multivariable logistic generalized linear model. More than two-thirds of participants with HDA were currently avoiding or delaying a dental visit. Among people with HDA, dental avoidance was independently and significantly predicted by difficulty paying a $300 dental bill, having no or only little trust in the last-visited dentist, perceived treatment need and dental anxiety. Among people with LDA, only perceived treatment need and dental anxiety predicted avoidance. In addition to their high anxiety, a number of additional barriers to dental visiting were found for people with HDA. These barriers, especially cost and communication issues with dentists, need to be addressed to assist people with HDA obtain necessary, regular dental care. (c) 2015 APA, all rights reserved).

Satisfaction with Dental Appearance and Attitude toward improving Dental Esthetics among Patients attending a Dental Teaching Center.

Science.gov (United States)

Maghaireh, Ghada A; Alzraikat, Hanan; Taha, Nessrin A

2016-01-01

The aim of this study was to evaluate the factors influencing the satisfaction of dental appearance and attitude toward treatments to improve dental esthetics among patients attending a dental teaching center. A questionnaire was used to collect data of four background variables among 450 patients attended a dental teaching center in the city of Irbid in Jordan. The questionnaire enclosed self-reported questions about the appearance of anterior teeth, received esthetic treatment and desired treatment for improving esthetics. Descriptive, multiple logistic regression and Chi-square tests were used for data analysis (p ≤ 0.05). The 450 participants consisted of (66.2%) male and (33.8%) female. Of these, 69.3% were satisfied with their dental appearance and 58.0% with the color of their teeth. Esthetic restorations were the most received treatment (39.8%) and whitening of teeth was the most desired treatment (55.3%). The patients' satisfaction with dental appearance was influenced by teeth color, crowding and receiving whitening (p < 0.05. r = 0.561, r(2) = 0.315). The most desired esthetic treatments influenced by the satisfaction with dental appearance were esthetic restorations and orthodontics (p < 0.05. r = 0.223, r(2) = 0.05). Significantly more female reported having esthetic restorations and orthodontics (p = 0.008, 0.000) and desired to have orthodontic, crowns or veneers and esthetic restorations (p = 0.000, 0.015, 0.028). Satisfaction with dental appearance was affected by teeth color, feeling teeth are crowded, desire for esthetic restorations and orthodontic treatment. A high percentage of patients were not satisfied with the color of their teeth. Recognizing the factors that affect patients' satisfaction with their present dental appearance and attitude toward treatments to improve dental esthetic can guide clinicians to strategies to improve esthetics.

Fast Image Texture Classification Using Decision Trees

Science.gov (United States)

Thompson, David R.

2011-01-01

Texture analysis would permit improved autonomous, onboard science data interpretation for adaptive navigation, sampling, and downlink decisions. These analyses would assist with terrain analysis and instrument placement in both macroscopic and microscopic image data products. Unfortunately, most state-of-the-art texture analysis demands computationally expensive convolutions of filters involving many floating-point operations. This makes them infeasible for radiation- hardened computers and spaceflight hardware. A new method approximates traditional texture classification of each image pixel with a fast decision-tree classifier. The classifier uses image features derived from simple filtering operations involving integer arithmetic. The texture analysis method is therefore amenable to implementation on FPGA (field-programmable gate array) hardware. Image features based on the "integral image" transform produce descriptive and efficient texture descriptors. Training the decision tree on a set of training data yields a classification scheme that produces reasonable approximations of optimal "texton" analysis at a fraction of the computational cost. A decision-tree learning algorithm employing the traditional k-means criterion of inter-cluster variance is used to learn tree structure from training data. The result is an efficient and accurate summary of surface morphology in images. This work is an evolutionary advance that unites several previous algorithms (k-means clustering, integral images, decision trees) and applies them to a new problem domain (morphology analysis for autonomous science during remote exploration). Advantages include order-of-magnitude improvements in runtime, feasibility for FPGA hardware, and significant improvements in texture classification accuracy.

Fiber vs Rolling Texture: Stress State Dependence for Cold-Drawn Wire

Science.gov (United States)

Zorina, M. A.; Karabanalov, M. S.; Stepanov, S. I.; Demakov, S. L.; Loginov, Yu. N.; Lobanov, M. L.

2018-02-01

The texture of the cold-drawn copper wire was investigated along the radius using electron backscatter diffraction. The complex fiber texture of the central region of the wire was considered as the rolling texture consisting of a set of preferred orientations. The texture of the periphery region was revealed to be similar to the shear texture. The orientation-dependent properties of the wire were proven to be determined by the texture of the near-surface layers.

Evolution of solidification texture during additive manufacturing

Science.gov (United States)

Wei, H. L.; Mazumder, J.; DebRoy, T.

2015-01-01

Striking differences in the solidification textures of a nickel based alloy owing to changes in laser scanning pattern during additive manufacturing are examined based on theory and experimental data. Understanding and controlling texture are important because it affects mechanical and chemical properties. Solidification texture depends on the local heat flow directions and competitive grain growth in one of the six preferred growth directions in face centered cubic alloys. Therefore, the heat flow directions are examined for various laser beam scanning patterns based on numerical modeling of heat transfer and fluid flow in three dimensions. Here we show that numerical modeling can not only provide a deeper understanding of the solidification growth patterns during the additive manufacturing, it also serves as a basis for customizing solidification textures which are important for properties and performance of components. PMID:26553246

Dental anxiety reduction and dental attendance after treatment in a dental fear clinic: A follow-up study.

NARCIS (Netherlands)

Aartman, I.H.A.; de Jongh, A.; Makkes, P.C.; Hoogstraten, J.

2000-01-01

The aim of the present study was to assess treatment outcome in terms of dental anxiety reduction at a post-treatment assessment and dental anxiety reduction and dental attendance one year later. Furthermore, it was determined to what extent psychopathological characteristics were related to

A Fourier-based textural feature extraction procedure

Science.gov (United States)

Stromberg, W. D.; Farr, T. G.

1986-01-01

A procedure is presented to discriminate and characterize regions of uniform image texture. The procedure utilizes textural features consisting of pixel-by-pixel estimates of the relative emphases of annular regions of the Fourier transform. The utility and derivation of the features are described through presentation of a theoretical justification of the concept followed by a heuristic extension to a real environment. Two examples are provided that validate the technique on synthetic images and demonstrate its applicability to the discrimination of geologic texture in a radar image of a tropical vegetated area.

On Texture and Geometry in Image Analysis

DEFF Research Database (Denmark)

Gustafsson, David Karl John

2009-01-01

fields and Maximum Entropy (FRAME) model [213, 214] is used for inpaining texture. We argue that many ’textures’ contain details that must be inpainted exactly. Simultaneous reconstruction of geometric structure and texture is a difficult problem, therefore, a two-phase reconstruction procedure...... is proposed. An inverse temperature is added to the FRAME model. In the first phase, the geometric structure is reconstructed by cooling the distribution, and in the second phase, the texture is added by heating the distribution. Empirically, we show that the long range geometric structure is inpainted...

Texture Control During the Manufacturing of Nonoriented Electrical Steels

NARCIS (Netherlands)

Kestens, L.; Jacobs, S.

2008-01-01

Methods of modern quantitative texture analysis are applied in order to characterize the crystallographic texture of various non-oriented electrical steel grades in view of their relation with the magnetic properties of the steel sheet. A texture parameter is defined which quantifies the density of

Magnetic resonance tomography and dental radiology (Dental-MRT); Die Magnetresonanztomographie in der Dentalradiologie (Dental-MRT)

Energy Technology Data Exchange (ETDEWEB)

Gahleitner, A. [Wien Univ. (Austria). Abt. fuer Osteologie; Wien Univ. (Austria). Abt. fuer Orale Chirurgie; Solar, P.; Ertl, L. [Wien Univ. (Austria). Abt. fuer Orale Chirurgie; Nasel, C.; Homolka, P. [Wien Univ. (Austria). Inst. fuer Biomedizinische Technik und Physik; Youssefzadeh, S.; Schick, S. [Wien Univ. (Austria). Abt. fuer Osteologie

1999-12-01

Purpose: To demonstrate the usefulness of Dental-MRT for imaging of anatomic and pathologic conditions of the mandible and maxilla. Methods: Seven healthy volunteers, 5 patients with pulpitis, 9 patients with dentigerous cysts, 5 patients after tooth transplantation and 12 patients with atrophic mandibles were evaluated. Studies of the jaws using axial T1- and T2-weighted gradient echo and spin echo sequences in 2D and 3D technique have been to performed. The acquired images were reconstructed with a standard dental software package on a workstation as panoramic and cross sectional views of the mandible or maxilla. Results: The entire maxilla and mandibula, teeth, dental pulp and the content of the mandibular canal were well depicted. Patients with inflammatory disease of the pulp chamber demonstrate bone marrow edema in the periapical region. Dentigerous cysts and their relation to the surrounding structures are clearly shown. After contrast media application marked enhancement of the dental pulp can be found. Conclusion: Dental-MRT provides a valuable tool for visualization and detection of dental diseases. (orig.) [German] Ziel dieses Beitrags ist die Vorstellung der Untersuchungsmoeglichkeiten des Ober- und Unterkiefers mittels Magnetresonanztomographie (Dental-MRT) und ihre Anwendung bei der Diagnose zahnmedizinischer Erkrankungen. Sieben gesunde Probanden, 5 Patienten mit Pulpitis, 9 Patienten mit dentogenen Zysten, 5 Patienten nach Zahntransplantationen und 12 Patienten mit atrophem Unterkiefer wurden untersucht. Axiale T1- und T2-gewichtete Gradientenecho- und Spinecho-Sequenzen in 2D und 3D-Technik wurden durchgefuehrt. Nach der Untersuchung wurden zusaetzliche Panoramaschnitte und orhoradiale Rekonstruktionen des Ober- und Unterkiefers, unter Verwendung einer gebraeuchlichen Dental-Software, angefertigt. Der gesamte Ober- oder Unterkiefer, Zaehne, Pulpa und der Inhalt des Mandibularkanals koennen gut dargestellt werden. Patienten mit einer Entzuendung der

Experimental and Numerical Investigation on Tribological Performance of Grooved Texture

Directory of Open Access Journals (Sweden)

CHEN Ping

2016-06-01

Full Text Available In order to study the influence of the angle and arrangement forms of micro-grooves on the tribological performance of the contact surface, the finite element analysis software was used to simulate the grooved textures with different angles and arrangements. The YLP-20 laser processing system was used to process grooved texture on stainless steel disk surfaces, and the Tribometer (UMT-2 was also used to conduct tribological test under the condition of rotation. The results show that the numerical simulation values are basically consistent with experimental results of grooved textures, and the tribological performance of the friction pairs with textures is also improved. The grooved textures with different angles and arrangement forms have different influence on tribological performance of friction pairs. When the friction velocity is less than 300r/min, the parallel texture with 0° has smaller friction coefficients. While the friction velocity is larger than 300r/min, the parallel texture with 90° has a better ability of reducing friction. Therefore, different grooved textures should be chosen according to operation conditions.

Dental hygiene students' part-time jobs in dental practices in the Netherlands.

Science.gov (United States)

Poorterman, J H G; Dikkes, B T; Brand, H S

2010-05-01

Many students have paid employment while studying. In the Netherlands, the Individual Health Care Professions Act (IHCP Act) allows dental hygiene students to work under certain conditions in a dental practice. The aim of the study was to determine how many dental hygiene students have part-time job employment in dental practice and which professional tasks they carry out. We also asked the dental hygiene students their opinion of the IHCP Act. All the enrolled dental hygiene students (n = 341) at a School of Health in the Netherlands received a questionnaire by email. The response was 52% (176 students). Of the responding students, 75% had paid employment in addition to their study. A proportion of the students (35%) worked in a dental practice. The median number of hours worked per week was eight. Study year, age and prior education were positively related to working part-time in dental practice. Activities frequently performed were giving oral hygiene instruction, fluoride applications, scaling and root planning, providing chair side assistance and giving local anaesthesia. Although the self-reported knowledge about the IHCP Act was high, almost half of the students expressed the need for more detailed legal information. Many dental hygiene students work in a dental practice, taking over a number of tasks usually performed by the dentist. More information in the dental hygiene curriculum about the requirements of the IHCP Act seems desirable.

TEXTURE OF COOKED SPELT WHEAT NOODLES

Directory of Open Access Journals (Sweden)

Magdaléna Lacko - Bartošová

2013-02-01

Full Text Available At present, there are limited and incomplete data on the ability of spelt to produce alimentary pasta of suitable quality. Noodles are traditional cereal-based food that is becoming increasingly popular worldwide because of its convenience, nutritional qualities, and palatability. It is generally accepted that texture is the main criterion for assessing overall quality of cooked noodles. We present selected indicators of noodle texture of three spelt cultivars – Oberkulmer Rotkorn, Rubiota and Franckenkorn grown in an ecological system at the locality of Dolna Malanta near Nitra. A texture analyzer TA.XT PLUS was used to determine cooked spelt wheat noodle firmness (N (AACC 66-50. The texture of cooked spelt wheat noodles was expressed also as elasticity (N and extensibility (mm. Statistical analysis showed significant influence of the variety and year of growing on the firmness, elasticity and extensibility of cooked noodles. The wholemeal spelt wheat noodles were characterized with lower cutting firmness than the flour noodles. Flour noodles were more tensile than wholemeal noodles. The best elasticity and extensibility of flour noodles was found in noodles prepared from Rubiota however from wholemeal noodles it was Oberkulmer Rotkorn. Spelt wheat is suitable for noodle production, however also here it is necessary to differentiate between varieties. According to achieved results, wholemeal noodles prepared from Oberkulmer Rotkorn can be recommended for noodle industry due to their consistent structure and better texture quality after cooking.

Relationships between dental personnel and non-dental primary health care providers in rural and remote Queensland, Australia: dental perspectives.

Science.gov (United States)

Stuart, Jackie; Hoang, Ha; Crocombe, Len; Barnett, Tony

2017-06-19

Collaboration between dental practitioners and non-dental primary care providers has the potential to improve oral health care for people in rural and remote communities, where access to oral health services is limited. However, there is limited research on collaboration between these professional disciplines. The purpose of this paper was to explore the relationships between dental practitioners and non-dental primary care providers from rural and remote areas of Queensland and to identify strategies that could improve collaboration between these disciplines from the perspective of dental participants. Semi-structured interviews were conducted between 2013 and 2015 with visiting, local and regional dental practitioners (n = 12) who had provided dental services to patients from eight rural and remote Queensland communities that did not have a resident dentist. Participants were purposely recruited through a snow ball sampling technique. Interview data were analysed using thematic analysis with the assistance of QSR Nvivo v.10. Four major themes emerged from the data: (1) Communication between dental practitioners and rural primary care providers; (2) Relationships between dental and primary care providers; (3) Maintenance of professional dualism; (4) Strategies to improve interprofessional relationships (with subthemes: face to face meetings; utilisation of technology; oral health training for primary care providers; and having a community based oral health contact person). Participants observed that there was a lack of communication between the dental providers who saw patients from these rural communities and the primary care providers who worked in each community. This was attributed to poor communication, the high turnover of staff and the siloed behaviours of some practitioners. Visiting dental practitioners were likely to have stronger professional relationships with hospital nursing, administrative and allied health care staff who were often long term

On dental caries and dental erosion in Swedish young adults.

Science.gov (United States)

Isaksson, Helén

2013-01-01

All children in Sweden are entitled to regular, free dental care up to 20 years of age. While dental caries generally continues to decline, still there is a pronounced skewness in caries prevalence. Furthermore, the reported increase in dental erosion in young adults is cause for concern. The aim was to study the prevalence of dental caries and dental erosion in a cohort of Swedish 20 year-olds, with special reference to the influence of previous caries experience and lifestyle as well as parental, socioeconomic and psychosocial factors. The study was prospective, longitudinal and cross-sectional in design and based on registration of caries lesions, dental erosion, body adiposity status, saliva sampling, interviews, and questionnaires at 20 years of age. Data were available for the same cohort at 1, 3, 6 and 15 years of age. 499 subjects (74 percent of the original cohort) were included. Five individuals were subsequently excluded, leaving a final sample of 494. 74 percent of the subjects had initial and/or manifest caries lesions and/or restorations. The mean number of DimFS was 5.8 and the mean number of DmFS on occlusal surfaces of molars was 1.1. There was a strong relationship between caries activity at 3 and 6 years of age and approximal caries prevalence in premolars and molars at 20 years of age. Overweight/obese individuals had significantly higher caries prevalence than normal weight individuals. Parental, socioeconomic and psychosocial factors during infancy were related to approximal caries at age 20. Dental erosion was found in 75 percent of the individuals: 18 percent of these had extensive erosion. There was a significant association between caries and dental erosion. A relationship was found between dental erosion and lifestyle factors and overweight/obesity. There is a strong relationship between caries prevalence at age 20 and caries experience in early childhood. Young adults show a high prevalence of dental erosion, but the severity is

Texture analysis using Gabor wavelets

Science.gov (United States)

Naghdy, Golshah A.; Wang, Jian; Ogunbona, Philip O.

1996-04-01

Receptive field profiles of simple cells in the visual cortex have been shown to resemble even- symmetric or odd-symmetric Gabor filters. Computational models employed in the analysis of textures have been motivated by two-dimensional Gabor functions arranged in a multi-channel architecture. More recently wavelets have emerged as a powerful tool for non-stationary signal analysis capable of encoding scale-space information efficiently. A multi-resolution implementation in the form of a dyadic decomposition of the signal of interest has been popularized by many researchers. In this paper, Gabor wavelet configured in a 'rosette' fashion is used as a multi-channel filter-bank feature extractor for texture classification. The 'rosette' spans 360 degrees of orientation and covers frequencies from dc. In the proposed algorithm, the texture images are decomposed by the Gabor wavelet configuration and the feature vectors corresponding to the mean of the outputs of the multi-channel filters extracted. A minimum distance classifier is used in the classification procedure. As a comparison the Gabor filter has been used to classify the same texture images from the Brodatz album and the results indicate the superior discriminatory characteristics of the Gabor wavelet. With the test images used it can be concluded that the Gabor wavelet model is a better approximation of the cortical cell receptive field profiles.

Highly textured KNN-based piezoelectric ceramics by conventional sintering

International Nuclear Information System (INIS)

Zapata, Angelica Maria Mazuera; Silva Junior, Paulo Sergio da; Zambrano, Michel Venet

2016-01-01

Full text: Texturing in ferroelectric ceramics has played an important role in the enhancement of their piezoelectric properties. Common methods for ceramic texturing are hot pressing and template grain ground; nevertheless, the needed facilities to apply hot pressing and the processing of single crystal make the texture of ceramics expensive and very difficult. In this study, a novel method was investigated to obtain highly textured lead-free ceramics. A (K 0.5 Na 0.5 ) 0.97 Li 0. 0 3 Nb 0.8 Ta 0. 2 matrix (KNLNT), with CuO excess was sintered between 1070 and 1110 °C following a solid state reaction procedure. The CuO excess promotes liquid phase formation and a partial melting of the material. XRD patterns showed the intensity of (100) family peaks became much stronger with the increasing of sintering temperature and CuO. In addition, Lotgering factor was calculated and exhibited a texture degree between 40 % and 70 % for sintered samples having 13 and 16 wt. % CuO, respectively. These, highly textured ceramics, with adequate cut, can be used as substitutes single crystals for texturing of KNN-based lead-free ceramics. (author)

78 FR 2647 - Dental Devices; Reclassification of Blade-Form Endosseous Dental Implant

Science.gov (United States)

2013-01-14

.... FDA-2012-N-0677] Dental Devices; Reclassification of Blade-Form Endosseous Dental Implant AGENCY: Food...) is proposing to reclassify the blade- form endosseous dental implant, a preamendments class III... proposing to revise the classification of blade-form endosseous dental implants. DATES: Submit either...

Influence of grain size and texture prior to warm rolling on microstructure, texture and magnetic properties of Fe-6.5 wt% Si steel

Science.gov (United States)

Xu, H. J.; Xu, Y. B.; Jiao, H. T.; Cheng, S. F.; Misra, R. D. K.; Li, J. P.

2018-05-01

Fe-6.5 wt% Si steel hot bands with different initial grain size and texture were obtained through different annealing treatment. These bands were then warm rolled and annealed. An analysis on the evolution of microstructure and texture, particularly the formation of recrystallization texture was studied. The results indicated that initial grain size and texture had a significant effect on texture evolution and magnetic properties. Large initial grains led to coarse deformed grains with dense and long shear bands after warm rolling. Such long shear bands resulted in growth advantage for {1 1 3} 〈3 6 1〉 oriented grains during recrystallization. On the other hand, sharp {11 h} 〈1, 2, 1/h〉 (α∗-fiber) texture in the coarse-grained sample led to dominant {1 1 2} 〈1 1 0〉 texture after warm rolling. Such {1 1 2} 〈1 1 0〉 deformed grains provided massive nucleation sites for {1 1 3} 〈3 6 1〉 oriented grains during subsequent recrystallization. These {1 1 3} 〈3 6 1〉 grains were confirmed to exhibit an advantage on grain growth compared to γ-fiber grains. As a result, significant {1 1 3} 〈3 6 1〉 texture was developed and unfavorable γ-fiber texture was inhibited in the final annealed sheet. Both these aspects led to superior magnetic properties in the sample with largest initial grain size. The magnetic induction B8 was 1.36 T and the high frequency core loss P10/400 was 17.07 W/kg.

Non-Hodgkin lymphoma response evaluation with MRI texture classification

Directory of Open Access Journals (Sweden)

Heinonen Tomi T

2009-06-01

Full Text Available Abstract Background To show magnetic resonance imaging (MRI texture appearance change in non-Hodgkin lymphoma (NHL during treatment with response controlled by quantitative volume analysis. Methods A total of 19 patients having NHL with an evaluable lymphoma lesion were scanned at three imaging timepoints with 1.5T device during clinical treatment evaluation. Texture characteristics of images were analyzed and classified with MaZda application and statistical tests. Results NHL tissue MRI texture imaged before treatment and under chemotherapy was classified within several subgroups, showing best discrimination with 96% correct classification in non-linear discriminant analysis of T2-weighted images. Texture parameters of MRI data were successfully tested with statistical tests to assess the impact of the separability of the parameters in evaluating chemotherapy response in lymphoma tissue. Conclusion Texture characteristics of MRI data were classified successfully; this proved texture analysis to be potential quantitative means of representing lymphoma tissue changes during chemotherapy response monitoring.

Creation of a scholars program in dental leadership (SPDL) for dental and dental hygiene students.

Science.gov (United States)

Taichman, Russell S; Green, Thomas G; Polverini, Peter J

2009-10-01

There is a great need for leaders in the dental profession. As technological advances make our world smaller and our lives faster and more complex, we as a profession face challenges and opportunities that are evolving. Many of the changes in the scope and mode of practice will require new and different approaches. Meeting these challenges will require changes in how we as dental professionals do business; interact with our patients, other stakeholders, and health care providers; and educate our future colleagues. The purposeful incorporation of leadership education into dental and dental hygiene curricula represents an important departure from existing paradigms-but will help prepare our students to address these challenges. This article provides an overview of the development of a Scholars Program in Dental Leadership (SPDL) at the University of Michigan School of Dentistry. Our aim for the program is to create a learning environment that fosters leadership development, so that students are prepared and motivated to assume leadership positions in the profession and their communities.

Dental Implant Surgery

Science.gov (United States)

... here to find out more. Dental Implant Surgery Dental Implant Surgery Dental implant surgery is, of course, ... to find out more. Wisdom Teeth Management Wisdom Teeth Management An impacted wisdom tooth can damage neighboring ...

Infant dental care (image)

Science.gov (United States)

... sugar water. As the child grows, establishing proper dental hygiene will promote healthy teeth and gums which are essential to overall good health. Poor dental development, dental disease, and dental trauma can result ...

New method development in prehistoric stone tool research: evaluating use duration and data analysis protocols.

Science.gov (United States)

Evans, Adrian A; Macdonald, Danielle A; Giusca, Claudiu L; Leach, Richard K

2014-10-01

Lithic microwear is a research field of prehistoric stone tool (lithic) analysis that has been developed with the aim to identify how stone tools were used. It has been shown that laser scanning confocal microscopy has the potential to be a useful quantitative tool in the study of prehistoric stone tool function. In this paper, two important lines of inquiry are investigated: (1) whether the texture of worn surfaces is constant under varying durations of tool use, and (2) the development of rapid objective data analysis protocols. This study reports on the attempt to further develop these areas of study and results in a better understanding of the complexities underlying the development of flexible analytical algorithms for surface analysis. The results show that when sampling is optimised, surface texture may be linked to contact material type, independent of use duration. Further research is needed to validate this finding and test an expanded range of contact materials. The use of automated analytical protocols has shown promise but is only reliable if sampling location and scale are defined. Results suggest that the sampling protocol reports on the degree of worn surface invasiveness, complicating the ability to investigate duration related textural characterisation. Copyright © 2014. Published by Elsevier Ltd.

Patients' experiences of dental implant treatment: A literature review of key qualitative studies.

Science.gov (United States)

Kashbour, W A; Rousseau, N S; Ellis, J S; Thomason, J M

2015-07-01

To identify and summarise the findings of previous qualitative studies relating to patients' experience of dental implant treatment (DIT) at various stages of their implant treatment, by means of textual narrative synthesis. Original articles reporting patients' experience with dental implant were included. A two-stage search of the literature, electronic and hand search identified relevant qualitative studies up to July 2014. An extensive electronic search was conducted of databases including PubMed, Embase, Scopus, Web of Knowledge, Cochrane Database and Google Scholar. Included primary studies (n=10) used qualitative research methods and qualitative analysis to investigate patients' experiences with dental implants treatment. While the growing interest in implant treatment for the replacement of missing dentition is evident, it is essential to investigate patients' perceptions of different aspects of implant treatment. This textual narrative synthesis conducted to review qualitative studies which provided insight into patients' experience of two types of implant prostheses namely ISOD (implant-supported overdenture) and FISP (fixed implant supported prostheses). Primary reviewed studies tended to include samples of older patients with more extensive tooth loss, and to focus on experiences prior to and post-treatment rather than on the treatment period itself. Findings across reviewed studies (n=10) suggested that patients with FISP thought of implant treatment as a process of 'normalisation'(1) and believed that such implant restorations could be similar to natural teeth, whereas patients with ISOD focused more on the functional and social advantages of their implant treatment. The growing interest in qualitative research is evident in several branches of clinical dentistry and dental implantology is not an exception. Qualitative studies concerning the patients account of their experience of dental implants is however limited. The aim of this review is to

Dental Environmental Noise Evaluation and Health Risk Model Construction to Dental Professionals

OpenAIRE

Ma, Kuen Wai; Wong, Hai Ming; Mak, Cheuk Ming

2017-01-01

Occupational noise is unavoidably produced from dental equipment, building facilities, and human voices in the dental environment. The purpose of this study was to investigate the effect of occupational noise exposure on the dental professionals’ health condition. The psychoacoustics approach noise exposure assessment followed by the health risk assessment was carried on at the paediatric dentistry clinic and the dental laboratory in the Prince Philip Dental Hospital of Hong Kong. The A-weigh...

Prevalence of Dental Fear and Anxiety amongst Patients in Selected Dental Clinics in Ghana

Science.gov (United States)

Ofori, Marian A.; Adu-Ababio, F.; Nyako, E. A.; Ndanu, Tom A.

2009-01-01

Objective: To find out the prevalence of dental anxiety and fear amongst patients in various selected dental clinics in Accra, Ghana. Study design: Dental patients (n = 279) who had either been exposed to dental treatments or had no prior dental exposure, attending four selected dental clinics in Accra were randomly sampled. They were interviewed…

Texture of altered layers issued from glass corrosion

International Nuclear Information System (INIS)

Phalippou, J.; Woignier, Th.; Ayral, A.

1997-01-01

The layers which develop at the glass surface subjected to water corrosion depend on a collection of interacting parameters. Such a material can be studied using techniques which have been previously demonstrated as suitable for gels. A detailed description of the behaviour of gels under measurements is given. Investigations show that to really know the texture both mechanical properties and permeability must be known. Different experiments are reported. They give a rough estimate of the altered layer texture. Results coming from different techniques are compared and in a few cases are used to estimate additional textural information. Finally we put an insight into the nature and consequently to the texture evolution of the layer as the corrosion proceeds. (authors)

Hand hygiene amongst dental professionals in a tertiary dental clinic ...

African Journals Online (AJOL)

Objective: To evaluate hand washing attitude and practices among Dentists and Dental Students treating patients in a Nigerian Tertiary Dental Clinic. Materials and Methods: A cross-sectional survey of Dentists and Dental Students treating patients in University of Benin Teaching Hospital was conducted between February ...

Texture of semi-solids : sensory flavor-texture interactions for custard desserts

NARCIS (Netherlands)

Wijk, de R.A.; Rasing, F.; Wilkinson, C.L.

2003-01-01

Possible interactions between flavor and oral texture sensations were investigated for four flavorants, diacetyl, benzaldehyde, vanillin, and caffeine, added in two concentrations to model vanilla custard desserts. The flavorants affected viscosities and resulted in corresponding changes in

Dental laboratory communication regarding removable dental prosthesis design in the UAE.

Science.gov (United States)

Haj-Ali, Reem; Al Quran, Firas; Adel, Omar

2012-07-01

The purpose of this study was to determine the methods dental practitioners in the United Arab Emirates (UAE) use to communicate cast removable dental prosthesis (RDP) design to dental laboratories; identify common practices taken by dentists/dental technicians prior to fabrication of RDP framework; and seek out dental technicians' attitudes toward their role in RDP design decisions. All dental laboratories (n = 28) listed in a local telephone directory were invited to complete a questionnaire through a face-to-face interview. They were also requested to examine RDP cases fabricated in the past 2 months and identify steps taken by dentists/dental technicians prior to fabrication of the framework. Descriptive statistics were used to report frequencies and percentages. Twenty-one (75%) dental laboratories agreed to participate, out of which 19 had the facilities to fabricate chrome-cobalt RDPs. Cast RDPs comprised approximately 4.04% (±2.67) of services provided. A reported 84.2% of dentists frequently communicate through generic lab script, with 89.5% rarely/never giving details regarding RDP design. While 52.6% of labs agree/strongly agree that it is the dentist's responsibility to decide the final RDP design, 94.7% agree/strongly agree that dentists should depend on dental technicians for design-making decisions. A total of 19 RDP cases were reviewed. All 19 were surveyed and designed by dental technicians but received dentist approval of design prior to fabrication. Thirteen (68.4%) had rest-seat preparations done by dentists after approval, and new impressions sent to the lab. No other tooth modifications were noted. The responsibility of RDP design appeared to be largely delegated to dental technicians. Importance of tooth modifications seemed to be undervalued and not completed prior to framework fabrication. © 2012 by the American College of Prosthodontists.

Pediatric dental chair vs. traditional dental chair: A pediatric dentist′s poll

Directory of Open Access Journals (Sweden)

Khushboo Barjatya

2015-01-01

Full Text Available Objective: Proper positioning of the child patient, can not only have positive ramifications for the operator′s posture, comfort, and career longevity - it can also lead to better treatment and increased productivity. The aim of the survey questionnaire was to assess the utilization, need, and attitude concerning dental chairs among pediatric dentist while working on and managing the child patient. Study Design: The questions were structured using adobe forms central online software, regarding the user-friendliness of pediatric dental chair vs. traditional adult dental chair available in the market. Results: Our result shows that out of 337 respondents, 79% worked on pediatric dental chair, whereas 21% had no experience of it. Of these 79% pediatric dentist, 48% preferred pediatric dental chair. But pediatric dental problem still has certain disadvantages like higher cost, leg space problem, lower availability, etc. Conclusion: During the research it was found that ergonomics and usability issues were the main problems. Thus, pediatric dental chair is not so popular in the current scenario. This study allowed for general ideas for the improvement of dental chairs and thus improved dental chair would fill the gap in the current scenario.

Multi Texture Analysis of Colorectal Cancer Continuum Using Multispectral Imagery.

Directory of Open Access Journals (Sweden)

Ahmad Chaddad

Full Text Available This paper proposes to characterize the continuum of colorectal cancer (CRC using multiple texture features extracted from multispectral optical microscopy images. Three types of pathological tissues (PT are considered: benign hyperplasia, intraepithelial neoplasia and carcinoma.In the proposed approach, the region of interest containing PT is first extracted from multispectral images using active contour segmentation. This region is then encoded using texture features based on the Laplacian-of-Gaussian (LoG filter, discrete wavelets (DW and gray level co-occurrence matrices (GLCM. To assess the significance of textural differences between PT types, a statistical analysis based on the Kruskal-Wallis test is performed. The usefulness of texture features is then evaluated quantitatively in terms of their ability to predict PT types using various classifier models.Preliminary results show significant texture differences between PT types, for all texture features (p-value < 0.01. Individually, GLCM texture features outperform LoG and DW features in terms of PT type prediction. However, a higher performance can be achieved by combining all texture features, resulting in a mean classification accuracy of 98.92%, sensitivity of 98.12%, and specificity of 99.67%.These results demonstrate the efficiency and effectiveness of combining multiple texture features for characterizing the continuum of CRC and discriminating between pathological tissues in multispectral images.

Organisational aspects of dental practices: do dental students think like patients or like general dental practitioners?

Science.gov (United States)

Sonneveld, R E; Brands, W G; Bronkhorst, E M; Welie, J V M; Truin, G J

2013-02-01

In view of transparency in health care, the widespread desire for more patient-centred care, and in an attempt to facilitate educational programmes that effectively respond to these changes, two research questions are formulated: (i) How do dental students rate the importance of various organisational aspects of dental practices compared with dental patients and general dental practitioners (GDPs), and what prescripts, defined as specific operational responsibilities of GDPs in these matters, do dental students propose? and (ii) In doing so, do students resemble patients or GDPs? In two survey studies, dental students (n = 198), patients (n = 3127) and GDPs (n = 303) were asked to rate by questionnaire the importance of 41 organisational aspects of a general dental practice and proposed specific operational responsibilities ('prescripts'). Seven of 41 aspects were rated as important by the majority of the students. Although in a different rank order, three aspects were predominantly selected by all three groups: continuing education, accessibility by telephone and Dutch-speaking GDP. For most aspects, significant differences were found between the prescripts proposed by students and those proposed by patients, and few differences were found between students and GDPs. The findings do not permit the general conclusion that the views of dental students resemble those of patients or GPDs. Looking at the overall rank order, the three respondent groups showed a great resemblance although significant differences were found for specific aspects. With regard to the proposed prescripts, students showed realistic views and the majority wants to participate in continuing education and work with protocols and guidelines. In this, they tend to resemble GDPs more than they resemble patients. © 2012 John Wiley & Sons A/S.

Dental education in Peru.

Science.gov (United States)

Komabayashi, Takashi; Sato, Manuel; Rodiguez, Lyly; Sato, Doris; Bird, William F

2008-09-01

This paper provides information about Peru's dental history and dental school system, including the curriculum and dental licensure. With the increase in the number of dental schools in Peru, the number of dentists is also increasing. Until 1965, Peru had only three dental schools; currently, there are 14. Four of these dental schools are public, and ten are private. A five- or six-year dental program leads to the B.D.S. degree. After successful completion of a thesis defense or competency examination, the D.D.S. degree is awarded. The D.D.S. is mandatory for practicing dentistry in Peru. Currently, there are approximately 14,000 active dentists, with a dentist-patient ratio of approximately 1:2,000.

U.S. Dental School Deans’ Perceptions of the Rising Cost of Dental Education and Borrowing Pressures on Dental Students: Report of Survey Results.

Science.gov (United States)

McAllister, Dora Elías; Garrison, Gwen E; Feldman, Cecile A; Anderson, Eugene L; Cook, Bryan J; Valachovic, Richard W

2015-06-01

This report presents findings from a survey of U.S. dental school deans designed to capture their perceptions regarding the rising cost of dental education and its impact on borrowing by dental students to finance their education. The survey included questions about factors influencing the cost of dental education, concerns about dental student borrowing, and financial awareness resources for students. The survey was distributed to the deans of all 63 U.S. dental schools in January 2013; 42 deans responded, for a 67% response rate. The results indicate that, according to the responding deans, new clinical technologies, technology costs, and central university taxes are the main factors that contribute to the increasing cost of dental education. Coupled with reduced state appropriations at public dental schools and declines in private giving at all dental schools, dental school deans face a perplexing set of financial management challenges. Tuition and fees are a primary source of revenue for all dental schools; however, many deans do not have total control over the cost of attending their schools since tuition and fees are often tied to mandates and policies from the parent university and the state legislature. The findings of this study indicate that U.S. dental school deans are aware of and concerned about the impact of increases in tuition and fees on dental student debt and that they are using a variety of strategies to address the growth in dental student borrowing.

Barriers and Drawbacks of the Assessment of Dental Fear, Dental Anxiety and Dental Phobia in Children: A Critical Literature Review.

Science.gov (United States)

Asl, Aminabadi Naser; Shokravi, Marzieh; Jamali, Zahra; Shirazi, Sajjad

Dental anxiety, fear and phobia have different etiology, response patterns, time courses, and intensities that justify a clear distinction between these constructs. Differentiation of dental anxiety, fear or phobia in practice is a critical prerequisite for developing and implementing effective treatment for children. The aim of this study was to investigate whether current researches in the pediatric dentistry appropriately discriminate the central construct of dental anxiety, fear and phobia. We also highlighted the specific methodological issues in the assessment of these issues in pediatric dentistry. A systematic search was conducted in Pubmed/medline and Scopus for articles which assessed dental anxiety, fear or phobia in children. 104 research papers were included in the review that had made a distinction between dental anxiety, fear and phobia and had not used them interchangeably. Only five studies used different clinical measures or cut-offs to discriminate between dental anxiety, fear and phobia. The dental literature appears unable to capture and also measure the multi-sided construct of dental anxiety, fear and phobia and, therefore, there was a tendency to use them interchangeably.

Quantitative analysis of textures produced in a hot-extruded zirconium plate; Analyse quantitative des textures developpees dans une plaque de zirconium filee a chaud

Energy Technology Data Exchange (ETDEWEB)

Couterne, J. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires. Institut national des sciences et techniques nucleaires, laboratoire de metallurgie

1967-01-01

The textures produced in zirconium by the extrusion at 730 deg C of a cylindrical billet in the form of a plate having a rectangular cross-section, have been studied by the Schulz method using an isotropic standard. These textures have been determined both parallel to the plane of the plate and parallel to the plane of the sides, All the results are analyzed in a final discussion which makes it possible to show, in particular near the edges of the plate, that certain components of the textures observed in the two series of recordings are in fact aspects of the same texture seen from two different angles, It is shown furthermore that the zirconium thus shaped has cold-work textures and als recrystallisation textures formed after the preceding cold-working, If the observed textures are considered schematically, it can be see that two of these have already been described in the literature and are similar to those found in rolled products: these textures are such that the (0001) planes are inclined at 36 deg C and 60 deg C respectively with respect to a plan tangential to the curve (envelope of transverse flow rates) resulting from the extrusion geometry under consideration; the third texture is defined. by the fact that the (0001) plane is orthogonal to the exterior surfaces of the plate. The direction of extrusion associated with these planes and common to the three textures is of the type <1010>, Dilatometric tests have been carried out on samples taken both parallel and perpendicular to the extrusion direction, These tests show that the zirconium is dilatometrically anisotropic and that a plot of ({alpha}{sub v})-a against temperature shows a change of gradient at 400 deg C, this latter effect may be due to the change in the electronic configuration of the metal occurring at this temperature. (author) [French] Les textures conferees au zirconium par filage a chaud a 730 deg C d'une billette cylindrique sous forme d'une plaque de section rectangulaire, ont

Quantitative analysis of textures produced in a hot-extruded zirconium plate; Analyse quantitative des textures developpees dans une plaque de zirconium filee a chaud

Energy Technology Data Exchange (ETDEWEB)

Couterne, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires. Institut national des sciences et techniques nucleaires, laboratoire de metallurgie

1967-01-01

The textures produced in zirconium by the extrusion at 730 deg C of a cylindrical billet in the form of a plate having a rectangular cross-section, have been studied by the Schulz method using an isotropic standard. These textures have been determined both parallel to the plane of the plate and parallel to the plane of the sides, All the results are analyzed in a final discussion which makes it possible to show, in particular near the edges of the plate, that certain components of the textures observed in the two series of recordings are in fact aspects of the same texture seen from two different angles, It is shown furthermore that the zirconium thus shaped has cold-work textures and als recrystallisation textures formed after the preceding cold-working, If the observed textures are considered schematically, it can be see that two of these have already been described in the literature and are similar to those found in rolled products: these textures are such that the (0001) planes are inclined at 36 deg C and 60 deg C respectively with respect to a plan tangential to the curve (envelope of transverse flow rates) resulting from the extrusion geometry under consideration; the third texture is defined. by the fact that the (0001) plane is orthogonal to the exterior surfaces of the plate. The direction of extrusion associated with these planes and common to the three textures is of the type <1010>, Dilatometric tests have been carried out on samples taken both parallel and perpendicular to the extrusion direction, These tests show that the zirconium is dilatometrically anisotropic and that a plot of ({alpha}{sub v})-a against temperature shows a change of gradient at 400 deg C, this latter effect may be due to the change in the electronic configuration of the metal occurring at this temperature. (author) [French] Les textures conferees au zirconium par filage a chaud a 730 deg C d'une billette cylindrique sous forme d'une plaque de section rectangulaire, ont ete

Temperature dependence of piezoelectric properties for textured SBN ceramics.

Science.gov (United States)

Kimura, Masahiko; Ogawa, Hirozumi; Kuroda, Daisuke; Sawada, Takuya; Higuchi, Yukio; Takagi, Hiroshi; Sakabe, Yukio

2007-12-01

Temperature dependences of piezoelectric properties were studied for h001i textured ceramics of bismuth layer-structured ferroelectrics, SrBi(2)Nb(2)O(9) (SBN). The textured ceramics with varied orientation degrees were fabricated by templated, grain-growth method, and the temperature dependences of resonance frequency were estimated. Excellent temperature stability of resonance frequency was obtained for the 76% textured ceramics. The resonance frequency of the 76% textured specimens varied almost linearly over a wide temperature range. Therefore, the variation was slight, even in a high temperature region above 150 degrees C. Temperature stability of a quartz crystal oscillator is generally higher than that of a ceramic resonator around room temperature. The variation of resonance frequency for the 76% textured SrBi(2)Nb(2)O(9) was larger than that of oscillation frequency for a typical quartz oscillator below 150 degrees C also in this study. However, the variation of the textured SrBi(2)Nb(2)O(9) was smaller than that of the quartz oscillator over a wide temperature range from -50 to 250 degrees C. Therefore, textured SrBi(2)Nb(2)O(9) ceramics is a major candidate material for the resonators used within a wide temperature range.

[Oral and dental health and oral and dental support of home patients--role of dental hygienist in the home service nursing station].

Science.gov (United States)

Hayashi, T; Kimura, M; Tamura, N; Hirata, S; Yabunaka, T; Kamimura, Y

1999-12-01

Home patients have few chances for going out, so communication with their family means a lot. Talking and eating are particular pleasures. Therefore, oral and dental health and oral and dental support are very important for home patients. A dental hygienist from our clinic visits and offers oral and dental health (oral care) and oral and dental support (oral rehabilitation) to home patients as part of a care plan with home care nurses. Moreover, as general conditions are closely related with oral function, maintaining oral and dental health and regular oral and dental support are very important in order to improve the quality of life (QOL) of home patients.

Bulimia and Anorexia Nervosa in Dental and Dental Hygiene Curricula.

Science.gov (United States)

Gross, Karen B. W.; And Others

1990-01-01

Dentists and dental hygienists are in a unique position to identify an eating disorder patient from observed oral manifestations and to refer the patient for psychological therapy. The inclusion of information on general and oral complications of bulimia and anorexia nervosa in dental and dental hygiene curriculum was examined. (MLW)

A Mid-Level Dental Provider in Oregon: Dental hygienists' perceptions.

Science.gov (United States)

Coplen, Amy E; Bell, Kathryn; Aamodt, Gail L; Ironside, Lynn

2017-10-01

Purpose: Many states are exploring alternative provider models and examining the role of the dental hygienist to address access to care challenges as the United States continues to face increasing demands for oral healthcare services. The purpose of this study was to assess dental hygienists' opinions in the state of Oregon regarding the current limitations of dental hygienists' scope of practice, perceived need for a mid-level provider in Oregon, and personal interest in becoming a mid-level provider. Methods: In December 2013 a survey was mailed to a sample of 1,231 dental hygienists registered in Oregon representing 30% of the licentiates. All licentiates holding expanded practice permits (EPP) were included in the sample (n=351). The following categories were included in the 32-question survey: scope of practice, mid-level provider, current practice, and demographics. Results: A total of 440 surveys were returned for a response rate of 36%. Of the EPP holders, 51% responded to the survey. Over half of respondents (59%) believe that a mid-level provider is needed in the state. Respondents holding membership in the American Dental Hygienists' Association, as well as EPP holders, were significantly more likely to respond that a mid-level dental provider was needed in the state (plevel provider was introduced in Oregon, the new provider should be a registered dental hygienist model. Forty-three percent (n=186) of respondents were interested in becoming mid-level providers and 47% (n=203) of respondents believed that the minimum education for a mid-level provider should be a bachelor's degree. The majority, 74% (n=137), of those interested in becoming a mid-level provider indicated a preference in completing their education through online teaching combined with a clinical internship. Conclusion: There is strong support from dental hygienists in Oregon that a need exists for a mid-level dental provider and that this provider model should be dental hygiene based

General dental practitioner's views on dental general anaesthesia services.

Science.gov (United States)

Threlfall, A G; King, D; Milsom, K M; Blinkhom, A S; Tickle, M

2007-06-01

Policy has recently changed on provision of dental general anaesthetic services in England. The aim of this study was to investigate general dental practitioners' views about dental general anaesthetics, the reduction in its availability and the impact on care of children with toothache. Qualitative study using semi-structured interviews and clinical case scenarios. General dental practitioners providing NHS services in the North West of England. 93 general dental practitioners were interviewed and 91 answered a clinical case scenario about the care they would provide for a 7-year-old child with multiple decayed teeth presenting with toothache. Scenario responses showed variation; 8% would immediately refer for general anaesthesia, 25% would initially prescribe antibiotics, but the majority would attempt to either restore or extract the tooth causing pain. Interview responses also demonstrated variation in care, however most dentists agree general anaesthesia has a role for nervous children but only refer as a last resort. The responses indicated an increase in inequalities, and that access to services did not match population needs, leaving some children waiting in pain. Most general dental practitioners support moving dental general anaesthesia into hospitals but some believe that it has widened health inequalities and there is also a problem associated with variation in treatment provision. Additional general anaesthetic services in some areas with high levels of tooth decay are needed and evidence based guidelines about caring for children with toothache are required.

Cool Polar Bears: Dabbing on the Texture

Science.gov (United States)

O'Connell, Jean

2011-01-01

In this article, the author describes how her second-graders created their cool polar bears. The students used the elements of shape and texture to create the bears. They used Monet's technique of dabbing paint so as to give the bear some texture on his fur.

Fast color/texture segmentation for outdoor robots

DEFF Research Database (Denmark)

Blas, Morten Rufus; Agrawal, Motilal; Sundaresan, Aravind

2008-01-01

We present a fast integrated approach for online segmentation of images for outdoor robots. A compact color and texture descriptor has been developed to describe local color and texture variations in an image. This descriptor is then used in a two-stage fast clustering framework using K...

Texturized dairy proteins.

Science.gov (United States)

Onwulata, Charles I; Phillips, John G; Tunick, Michael H; Qi, Phoebi X; Cooke, Peter H

2010-03-01

Dairy proteins are amenable to structural modifications induced by high temperature, shear, and moisture; in particular, whey proteins can change conformation to new unfolded states. The change in protein state is a basis for creating new foods. The dairy products, nonfat dried milk (NDM), whey protein concentrate (WPC), and whey protein isolate (WPI) were modified using a twin-screw extruder at melt temperatures of 50, 75, and 100 degrees C, and moistures ranging from 20 to 70 wt%. Viscoelasticity and solubility measurements showed that extrusion temperature was a more significant (P extruded dairy protein ranged from rigid (2500 N) to soft (2.7 N). Extruding at or above 75 degrees C resulted in increased peak force for WPC (138 to 2500 N) and WPI (2.7 to 147.1 N). NDM was marginally texturized; the presence of lactose interfered with its texturization. WPI products extruded at 50 degrees C were not texturized; their solubility values ranged from 71.8% to 92.6%. A wide possibility exists for creating new foods with texturized dairy proteins due to the extensive range of states achievable. Dairy proteins can be used to boost the protein content in puffed snacks made from corn meal, but unmodified, they bind water and form doughy pastes with starch. To minimize the water binding property of dairy proteins, WPI, or WPC, or NDM were modified by extrusion processing. Extrusion temperature conditions were adjusted to 50, 75, or 100 degrees C, sufficient to change the structure of the dairy proteins, but not destroy them. Extrusion modified the structures of these dairy proteins for ease of use in starchy foods to boost nutrient levels. Dairy proteins can be used to boost the protein content in puffed snacks made from corn meal, but unmodified, they bind water and form doughy pastes with starch. To minimize the water binding property of dairy proteins, whey protein isolate, whey protein concentrate, or nonfat dried milk were modified by extrusion processing. Extrusion

The Heeger & Bergen Pyramid Based Texture Synthesis Algorithm

Directory of Open Access Journals (Sweden)

Thibaud Briand

2014-11-01

Full Text Available This contribution deals with the Heeger-Bergen pyramid-based texture analysis/synthesis algorithm. It brings a detailed explanation of the original algorithm tested on many characteristic examples. Our analysis reproduces the original results, but also brings a minor improvement concerning non-periodic textures. Inspired by visual perception theories, Heeger and Bergen proposed to characterize a texture by its first-order statistics of both its color and its responses to multiscale and multi-orientation filters, namely the steerable pyramid. The Heeger-Bergen algorithm consists in the following procedure: starting from a white noise image, histogram matchings are performed to the noise alternatively in both the image domain and steerable pyramid domain, so that the corresponding histograms match the ones of the input texture.

Disparities in unmet dental need and dental care received by pregnant women in Maryland.

Science.gov (United States)

Singhal, Astha; Chattopadhyay, Amit; Garcia, A Isabel; Adams, Amy B; Cheng, Diana

2014-09-01

To examine prenatal dental care needs, utilization and oral health counseling among Maryland women who delivered a live infant during 2001-2003 and identify the factors associated with having a dental visit and having an unmet dental need during pregnancy. Pregnancy Risk Assessment Monitoring System is an ongoing population based surveillance system that collects information of women's attitudes and experiences before, during, and shortly after pregnancy. Logistic regression was used to model dental visits and unmet dental need using predictor variables for Maryland 2001-2003 births. Less than half of all women reported having a dental visit and receiving oral health advice during pregnancy. Twenty-five percent of women reported a need for dental care, of which 33 % did not receive dental care despite their perceived need. Multivariate modeling revealed that racial minorities, women who were not married and those with annual income dental visit. Women who were not married, had low annual income, were older than 40 years of age, had an unintended pregnancy and received prenatal care later than desired were most likely to have an unmet dental need during pregnancy. Despite reported needs and existing recommendations to include oral health as a component of prenatal care, less than half of pregnant women have a dental visit during their pregnancy. One-third of women with a dental problem did not have a dental visit highlighting the unmet need for dental care during pregnancy.

Cloud field classification based on textural features

Science.gov (United States)

Sengupta, Sailes Kumar

1989-01-01

An essential component in global climate research is accurate cloud cover and type determination. Of the two approaches to texture-based classification (statistical and textural), only the former is effective in the classification of natural scenes such as land, ocean, and atmosphere. In the statistical approach that was adopted, parameters characterizing the stochastic properties of the spatial distribution of grey levels in an image are estimated and then used as features for cloud classification. Two types of textural measures were used. One is based on the distribution of the grey level difference vector (GLDV), and the other on a set of textural features derived from the MaxMin cooccurrence matrix (MMCM). The GLDV method looks at the difference D of grey levels at pixels separated by a horizontal distance d and computes several statistics based on this distribution. These are then used as features in subsequent classification. The MaxMin tectural features on the other hand are based on the MMCM, a matrix whose (I,J)th entry give the relative frequency of occurrences of the grey level pair (I,J) that are consecutive and thresholded local extremes separated by a given pixel distance d. Textural measures are then computed based on this matrix in much the same manner as is done in texture computation using the grey level cooccurrence matrix. The database consists of 37 cloud field scenes from LANDSAT imagery using a near IR visible channel. The classification algorithm used is the well known Stepwise Discriminant Analysis. The overall accuracy was estimated by the percentage or correct classifications in each case. It turns out that both types of classifiers, at their best combination of features, and at any given spatial resolution give approximately the same classification accuracy. A neural network based classifier with a feed forward architecture and a back propagation training algorithm is used to increase the classification accuracy, using these two classes

Child dental anxiety, parental rearing style and dental history reported by parents.

Science.gov (United States)

Krikken, J B; Vanwijk, A J; Tencate, J M; Veerkamp, J S

2013-12-01

To examine the relationship between self-reported parental rearing style, parent's assessment of their child's dental anxiety and the dental history of children. Parents of primary school children were asked to complete questionnaires about their parenting style, using four different questionnaires. Parents also completed the Child Fear Survey Schedule Dental Subscale (CFSS-DS) on behalf of their child and a questionnaire about the dental history of their child. 454 interview forms were available for analysis. Minor associations were found between dental anxiety and parenting style. Anxious parents were more permissive and less restrictive in their parenting style. Parents of children who did not visit their dentist for regular check-ups reported more laxness and less restrictiveness. Children who had a cavity at the time of investigation, children who had suffered from toothache in the past and children who did not have a nice and friendly dentist reported more dental anxiety. No clear associations between parenting style and dental anxiety were found. Known causes of dental anxiety were confirmed.

Patterns of dental services and factors that influence dental services among 64-65 year-old regular users of dental care in Denmark

DEFF Research Database (Denmark)

Christensen, Lisa Bøge; Rosing, Kasper; Lempert, Susanne Merethe

2016-01-01

to dental status and caries experience. Finally, to discuss the future planning of dental services aimed at the increasing population of elderly citizens. [Correction made on 21 March 2014, after first online publication: The sentence ‘Data on elderly's dental service are scarce, although increased use....... Conclusion For future planning of dental care for elderly, dental status, geographical and social area-based factors and to some degree gender, income, and education must be taken into consideration as all these factors seem to influence the future demand for dental services....

Gender differences in first-year dental students' motivation to attend dental school.

Science.gov (United States)

Scarbecz, Mark; Ross, Judith A

2002-08-01

Women's role in the field of dentistry has historically been limited to the dental auxiliary fields, rather than that of D.D.S. or D.M.D. Today, women are nearly 38 percent of U.S. dental school students and 14 percent of active practitioners. The slow(er) influx of women into dentistry has been little studied by dental educators. During the 2000-01 academic year, we conducted a survey of first-year dental students at a sample of publicly funded U.S. dental schools. The purpose of the survey was to assess gender differences in motives for pursuing a dental career. The data show that male dental students rate self-employment and business-related motives as more important, while female dental students rate people-oriented motives more highly. Factor analysis revealed four distinct clusters of motives for pursuing a dental career: a financial motive, a business-oriented motive, a people-oriented or caring motive, and a flexibility motive. Women scored significantly higher than men on the caring factor, whereas the reverse was true on the business factor. Male and female students rated financial and flexibility motives equally. The implications of the results for attracting students to the profession of dentistry are discussed.

Reasons for late seeking of dental care among dental patients ...

African Journals Online (AJOL)

Reasons for delayed reporting for oral care were negligence (53.5%); poor dental services or visited but not treated (19.4%); financial reasons (14.8%); and dental fear (12.3%). Seventy seven percent of respondents who had toothache due to advanced dental caries were aware that the aching tooth was decayed, of which, ...

Dental esthetic satisfaction, received and desired dental treatments for improvement of esthetics.

Science.gov (United States)

Akarslan, Zühre Zafersoy; Sadik, Burak; Erten, Hüya; Karabulut, Erdem

2009-01-01

The purposes of this research were to investigate factors influencing patients' satisfaction with their present dental esthetic, received previous dental treatments on anterior teeth and basic treatments that they wanted to undergo to improve their dental appearance. A total of 1014 patients who attended a dental school in a major city in Turkey participated in the study. The participants were surveyed with a questionnaire containing questions about gender, age, education level, self-reported tooth appearance, received previous dental treatments on anterior teeth and desired basic esthetic dental treatments. Statistical analysis of the verifying data was made with descriptive statistics, chi2 test and multiple logistic regression analyses. According to the analyses of the verifying data, 55.1% of the patients were dissatisfied with the color of their teeth, 42.7% with dental appearance, 29.9% with crowding of anterior teeth, 23.3% were hiding teeth while smiling, 16.1% had non-esthetic restorations and 11.9% thought that their anterior teeth were protruding. Esthetic restoration was found to be the most-performed treatment recently (29.0%) and whitening of teeth was the most-desired dental treatment (49.0%). Gender, age and education level had an effect on satisfaction and received previous and desired dental treatments for improvement of esthetics. Many of the Turkish patients surveyed in the study were dissatisfied and desired the improvement of dental esthetics. Therefore, dentists should consider this as an important dimension in their practice.

Low-dose Dental-CT

International Nuclear Information System (INIS)

Gahleitner, A.; Imhof, H.; Homolka, P.; Fuerhauser, R.; Freudenthaler, J.; Watzek, G.

2000-01-01

Dental-CT is a relatively new, increasingly used investigation technique in dental radiology. Several authors have stated that the indication for Dental-CT has to be chosen on a strict basis, due to high dose values. This article describes the technique of performing dental-CT and calculates the effective dose based on published data and own measurements as well as the dose reduction potential to achieve an optimized protocol for Dental-CT investigations. (orig.) [de

Texture collapse

International Nuclear Information System (INIS)

Prokopec, T.; Sornborger, A.; Brandenberger, R.H.

1992-01-01

We study single-texture collapse using a leapfrog discretization method on a 30x30x30 spatial lattice. We investigate the influence of boundary conditions, physical size of the lattice, type of space-time background (flat, i.e., nonexpanding, vs radiation-dominated and matter-dominated universes), and spatial distribution of the initial texture configuration on collapse time and critical winding. For a spherically symmetric initial configuration of size equal to the horizon size on a lattice containing 12 (30) horizon volumes, the critical winding is found to be 0.621±0.001 (0.602±0.003) (flat case), 0.624±0.002 (0.604±0.005) (radiation era), 0.628±0.002 (0.612±0.003) (matter era). The larger the physical size of the lattice (in units of the horizon size), the smaller is the critical winding, and in the limit of an infinite lattice, we argue that the critical winding approaches 0.5. For radially asymmetric cases, contraction of one axis ( /Ipancake case) slightly reduces collapse time and critical winding, and contraction of two axes (d/Icigar case) reduces collapse time and critical winding significantly

Marketing Dental Services | Tuominen | Tanzania Dental Journal

African Journals Online (AJOL)

Tanzania Dental Journal. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 9, No 1 (2000) >. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register. Marketing Dental Services. R Tuominen. Abstract. No Abstract.

Dental Radiographs Ordered by Dental Professionals: an ...

African Journals Online (AJOL)

Conclusions: Even in resource limited settings dental caries is still the regular indication for taking dental radiographs, and periapical views are the most frequent type of radiograph ordered. Maxillary central incisors and mandibular molars were types of teeth commonly x-rayed mainly due to the aesthetic importance of the ...

Proposal for internet-based Digital Dental Chart for personal dental identification in forensics.

Science.gov (United States)

Hanaoka, Yoichi; Ueno, Asao; Tsuzuki, Tamiyuki; Kajiwara, Masahiro; Minaguchi, Kiyoshi; Sato, Yoshinobu

2007-05-03

A dental chart is very useful as a standard source of evidence in the personal identification of bodies. However, the kind of dental chart available will often vary as a number of types of odontogram have been developed where the visual representation of dental conditions has relied on hand-drawn representation. We propose the Digital Dental Chart (DDC) as a new style of dental chart, especially for open investigations aimed at establishing the identity of unknown bodies. Each DDC is constructed using actual oral digital images and dental data, and is easy to upload onto an Internet website. The DDC is a more useful forensic resource than the standard types of dental chart in current use as it has several advantages, among which are its ability to carry a large volume of information and reproduce dental conditions clearly and in detail on a cost-effective basis.

Determination of textures by neutron diffraction

International Nuclear Information System (INIS)

Dervin, P.; Penelle, R.

1989-01-01

In virtue of the low absorption coefficient of most materials in regard to neutrons, neutron diffraction is particularly well adapted for high-precision characterizing of the gross texture of massive fine-grained or coarse-grained specimens of the order of the cubic centimeter. The firt part of this paper is devoted to a description of the distribution of crystalline orientations, and the second part to experimental identification of textures [fr

Texture and anisotropy in the bismuth sodium titanate system

Science.gov (United States)

Fancher, Christoher M.

Bi0.5Na0.5TiO3 has received interest as a potential replacement for lead containing ferroelectrics. However, the piezoelectric response of pure Bi0.5Na0.5TiO 3 does not compare to the strong piezoelectric response of lead based piezoelectrics. To increase the piezoelectric response, Bi0.5Na 0.5TiO3 has been alloyed with BaTiO3 and K 0.5Na0.5NbO3. Another route to enhance the response is to take advantage of the anisotropic properties by inducing a preferred crystallographic orientation. Both routes were used to investigate the effect a crystallographic texture has on the strain response of Bi0.5Na 0.5TiO3-based ceramics. A crystallographic texture was induced by templated grain growth of pure phase Bi0.5Na0.5TiO3 templates using the tape casting method to orient template particles relative to the tape cast normal. Sintered Bi0.5Na0.5TiO3-based materials developed a strong (00l)pc fiber texture relative to the tape cast normal, with no preferential alignment relative to the tape cast plane. Textured Bi0.5Na0.5TiO3-(5)BaTiO3 showed a piezoelectric response of 245 pC/N, a better than 50% enhancement from the 150 pC/N response of randomly oriented samples. The Bi0.5Na0.5TiO3-(5)BaTiO3-(2)K 0.5Na0.5NbO3 (x,y) system has been shown to undergo electric-field-induced phase transformation from a pseudocubic to polar phase. For (7,2) a strong 8.7 multiples of a random distribution (MRD) crystallographic texture increased the macroscopic strain response by 50%. Applying the electric field perpendicular to the fiber texture axis reduces the macroscopic strain response of textured (7,2) by 17%. The affect field direction has on the electric-field-induced phase transformations of textured (7,2) was investigated using in situ electric field dependent diffraction. In situ diffraction data showed the high strain response of textured (7,2) can be attributed to a reversible pseudocubic to tetragonal transformation. The field-induced tetragonal phase nucleates preferentially with a

Texture analysis of

NARCIS (Netherlands)

Lubsch, A.; Timmermans, K.

2017-01-01

Texture analysis is a method to test the physical properties of a material by tension and compression. The growing interest in commercialisation of seaweeds for human food has stimulated research into the physical properties of seaweed tissue. These are important parameters for the survival of

Formation of biaxial texture in metal films by selective ion beam etching

Energy Technology Data Exchange (ETDEWEB)

Park, S.J. [Department of Materials Science and Engineering, University of Florida, 106 Rhines Hall, P.O. Box 116400, Gainesville, FL 32611 (United States); Norton, D.P. [Department of Materials Science and Engineering, University of Florida, 106 Rhines Hall, P.O. Box 116400, Gainesville, FL 32611 (United States)]. E-mail: dnort@mse.ufl.edu; Selvamanickam, Venkat [IGC-SuperPower, LLC, 450 Duane Avenue, Schenectady, NY 12304 (United States)

2006-05-15

The formation of in-plane texture via ion bombardment of uniaxially textured metal films was investigated. In particular, selective grain Ar ion beam etching of uniaxially textured (0 0 1) Ni was used to achieve in-plane aligned Ni grains. Unlike conventional ion beam assisted deposition, the ion beam irradiates the uniaxially textured film surface with no impinging deposition flux. The initial uniaxial texture is established via surface energy minimization with no ion irradiation. Within this sequential texturing method, in-plane grain alignment is driven by selective etching and grain overgrowth. Biaxial texture was achieved for ion beam irradiation at elevated temperature.

Formation of biaxial texture in metal films by selective ion beam etching

International Nuclear Information System (INIS)

Park, S.J.; Norton, D.P.; Selvamanickam, Venkat

2006-01-01

The formation of in-plane texture via ion bombardment of uniaxially textured metal films was investigated. In particular, selective grain Ar ion beam etching of uniaxially textured (0 0 1) Ni was used to achieve in-plane aligned Ni grains. Unlike conventional ion beam assisted deposition, the ion beam irradiates the uniaxially textured film surface with no impinging deposition flux. The initial uniaxial texture is established via surface energy minimization with no ion irradiation. Within this sequential texturing method, in-plane grain alignment is driven by selective etching and grain overgrowth. Biaxial texture was achieved for ion beam irradiation at elevated temperature

The importance of dental aesthetics among dental students assessment of knowledge

OpenAIRE

Manipal, Sunayana; Mohan, C. S. Anand; Kumar, D. Lokesh; Cholan, Priyanka K.; Ahmed, Adil; Adusumilli, Preethi

2014-01-01

Objective: The aim of this study is to assess the dental esthetics awareness among dental students in a private university in Chennai as none is available in Chennai, Tamil Nadu. Materials and Methods: The dental esthetics awareness questionnaire consisting of a battery of 19 questions under five aspects that is, physical, functional, social, knowledge, and psychological aspects was administered to a sample of 100 dental college students aged between 18 and 27 years in a private college in Ch...

DENTAL SCHOOL PLANNING.

Science.gov (United States)

GALAGAN, DONALD J.

THIS DISCUSSION PRESENTS A COMPLETE PICTURE OF THE CURRENT STATE OF DENTAL EDUCATION WITH SUGGESTIONS FOR MEETING THE DEMANDS FOR DENTAL STAFF AND FACILITIES. THE AREAS INVESTIGATED ARE (1) OBJECTIVES IN DENTAL EDUCATION--COURSES, TEACHING MODES, INNOVATIONS IN CURRICULUM, COORDINATION OF BASIC AND CLINICAL INSTRUCTION, (2) FACILITY…

Examination of social networking professionalism among dental and dental hygiene students.

Science.gov (United States)

Henry, Rachel K; Molnar, Amy L

2013-11-01

Becoming a dental professional requires one to apply ethical decision making skills and demonstrate high standards of professionalism in practice, including the way professionals present themselves to the public. With social media as an evergrowing part of personal and professional communications, this study aimed to determine the accessibility, amount, and type of unprofessional content on Facebook profiles of dental hygiene and dental students in a college of dentistry. The authors evaluated the online profiles of all 499 dental and dental hygiene students at The Ohio State University using objective measures that included existence of a profile, current privacy settings, and access to personally identifiable information. A sample of profiles were evaluated for unprofessional content including photos, comments, and wall posts. The majority of these students were found to use Facebook, with 61 percent having Facebook profiles. Dental hygiene students were more likely to have a Facebook profile than were dental students: 72.6 percent and 59.1 percent, respectively (p=0.027). The majority of the students' profiles had some form of privacy setting enabled, with only 4 percent being entirely open to the public. Fewer than 2 percent of the students allowed non-friends access to personal information. Based on in-depth analysis of the profiles, fourteen (5.8 percent) instances of unprofessionalism were recorded; the most common unprofessional content involved substance abuse. This study found that these dental and dental hygiene students frequently possessed an identifiable Facebook account and nearly half had some kind of personal information on their profile that could potentially be shared with the public. In some instances, the students gave patients, faculty, and potential employers access to content that is not reflective of a dental professional. Academic institutions should consider implementing policies that bring awareness to and address the use of social media

Association between Childhood Dental Experiences and Dental Fear among Dental, Psychology and Mathematics Undergraduates in Brazil

Directory of Open Access Journals (Sweden)

Júnia M. Serra-Negra

2012-12-01

Full Text Available The aim of the present study was to evaluate the association between childhood dental experiences and dental fear in adulthood among dentistry, psychology and mathematics undergraduate students. A cross-sectional study of 1,256 students from the city of Belo Horizonte, Brazil, was performed. Students responded to the Brazilian version of the Dental Fear Survey (DFS and a questionnaire regarding previous dental experiences. Both the DFS and the questionnaire were self-administered. Association was tested using descriptive, bivariate and multivariate linear regression analysis, with a 5% significance level. Dentistry undergraduates reported lower scores than psychology (p < 0.001 and mathematics undergraduates (p < 0.05 for all three dimensions of the DFS. Negative dental experiences in childhood was associated with dimensions of Avoidance (B = 2.70, p < 0.001, Physiological arousal (B = 1.42, p < 0.001 and Fears of specific stimuli/situations (B = 3.44, p < 0.001. The reason for first visit to dentist was associated with dimensions of Physiological arousal (B = 0.76, p < 0.01 and Fears of specific stimuli/situations (B = 1.29, p < 0.01. Dentists should be encouraged to evaluate the dental fear of their patients before treatment. The DFS has been found to be an effective instrument for this purpose.

Dental cavities

Science.gov (United States)

... this page: //medlineplus.gov/ency/article/001055.htm Dental cavities To use the sharing features on this page, please enable JavaScript. Dental cavities are holes (or structural damage) in the ...

Biocompatibility of dental alloys

Energy Technology Data Exchange (ETDEWEB)

Braemer, W. [Heraeus Kulzer GmbH and Co. KG, Hanau (Germany)

2001-10-01

Modern dental alloys have been used for 50 years to produce prosthetic dental restorations. Generally, the crowns and frames of a prosthesis are prepared in dental alloys, and then veneered by feldspar ceramics or composites. In use, the alloys are exposed to the corrosive influence of saliva and bacteria. Metallic dental materials can be classified as precious and non-precious alloys. Precious alloys consist of gold, platinum, and small amounts of non-precious components such as copper, tin, or zinc. The non-precious alloys are based on either nickel or cobalt, alloyed with chrome, molybdenum, manganese, etc. Titanium is used as Grade 2 quality for dental purposes. As well as the dental casting alloys, high purity electroplated gold (99.8 wt.-%) is used in dental technology. This review discusses the corrosion behavior of metallic dental materials with saliva in ''in vitro'' tests and the influence of alloy components on bacteria (Lactobacillus casei and Streptococcus mutans). The test results show that alloys with high gold content, cobalt-based alloys, titanium, and electroplated gold are suitable for use as dental materials. (orig.)

Adult Dental Anxiety: Recent Assessment Approaches and Psychological Management in a Dental Practice Setting.

Science.gov (United States)

Humphris, Gerry; Spyt, James; Herbison, Alice G; Kelsey, Thomas W

2016-05-01

Dental anxiety of patients is a common feature of the everyday experience of dental practice. This article advocates the use of regular assessment of this psychological construct to assist in patient management. Various tools, such as the Modified Dental Anxiety Scale (MDAS), are available to monitor dental anxiety that are quick to complete and easy to interpret. Patient burden is low. A new mobile phone assessment system (DENTANX) is being developed for distribution. This application and other psychological interventions are being investigated to assist patients to receive dental care routinely. Clinical relevance: This article provides evidence and expert opinion on the worth of regular dental anxiety assessment in dental practice using structured tools, such as the Modified Dental Anxiety Scale, and consideration of psychological intervention development.

Reconstruction of pseudo three-dimensional dental image from dental panoramic radiograph and tooth surface shape

International Nuclear Information System (INIS)

Imura, Masataka; Kuroda, Yoshihiro; Oshiro, Osamu; Kuroda, Tomohiro; Kagiyama, Yoshiyuki; Yagi, Masakazu; Takada, Kenji; Azuma, Hiroko

2010-01-01

Three-dimensional volume data set is useful for diagnosis in dental treatments. However, to obtain three-dimensional images of a dental arch in general dental clinics is difficult. In this paper, we propose a method to reconstruct pseudo three-dimensional dental images from a dental panoramic radiograph and a tooth surface shape which can be obtained from three dimensional shape measurement of a dental impression. The proposed method finds an appropriate curved surface on which the dental panoramic radiograph is mapped by comparing a virtual panoramic image made from a tooth surface shape to a real panoramic radiograph. The developed pseudo three-dimensional dental images give clear impression of patient's dental condition. (author)

TEXTURE ANALYSIS OF EXTRUDED APPLE POMACE - WHEAT SEMOLINA BLENDS

Directory of Open Access Journals (Sweden)

Ivan Bakalov

2016-03-01

Full Text Available Apple pomace - wheat semolina blends were extruded in a laboratory single screw extruder (Brabender 20 DN, Germany. Effects apple pomace content, moisture content, screw speed, and temperature of final cooking zone on texture of extrudates were studied applying response surface methodology. The texture characteristics of the extrudates were measured using a TA.XT Plus Texture Analyser, Stable Micro Systems.

History of dental hygiene research.

Science.gov (United States)

Bowen, Denise M

2013-01-01

Dental hygiene is defined as the science and practice of the recognition, treatment and prevention of oral diseases. The history of dental hygiene research is considered in the context of the development of the discipline and an emerging infrastructure. Research-related events supporting the growth and maturation of the profession are considered from the early years to the most recent. The benefits of preventive oral health services provided by dental hygienists have been supported by research, and the practice of dental hygiene has expanded as a result of research findings since its inception 100 years ago. Dental hygienists' engagement in research, however, did not begin until the 1960s as research associates or administrators, primarily with dental researchers as primary investigators. The Journal of Dental Hygiene (JDH) has provided information for dental hygiene practice since 1927, and has been the primary venue for dissemination of dental hygiene research since 1945. Graduate education in dental hygiene at the master's degree level and the work of early dental hygiene researchers led to the first conference on dental hygiene research in 1982. Over 30 years later, dental hygiene has established a meta-paradigm and defined conceptual models, built an initial infrastructure to support research endeavors and contributed much to the development of dental hygiene as a unique discipline. A doctoral degree in the discipline, continued theory-based research, initiatives to foster collaborations between dental hygiene and other researchers and enhanced capabilities to attract funding to support large scale studies are goals that must be attained through the efforts of future researchers to address the needs for additional development in the discipline of dental hygiene. Dental hygiene research supports the growing discipline and its value to society.

Patterns of dental services and factors that influence dental services among 64-65-year-old regular users of dental care in Denmark.

Science.gov (United States)

Christensen, Lisa B; Rosing, Kasper; Lempert, Susanne M; Hede, Børge

2016-03-01

To describe the pattern of dental services provided to 64-65-year-old Danes who are regular users of dental care over a 5-year period, to analyse whether this pattern is associated with socio-demographic and/or socioeconomic factors, and if different uses of dental services are related to dental status and caries experience. Finally, to discuss the future planning of dental services aimed at the increasing population of elderly citizens. [Correction made on 21 March 2014, after first online publication: The sentence 'Data on elderly's dental service are scarce, although increased use is seen and more teeth are present in this age group.' was removed.] A cross-sectional study of all aged 64-65 (n = 37 234) who received a dental examination in 2009 was conducted. Clinical data comprised dental services received under the National Health Insurance reimbursement scheme, dental status and DMFT. Geographical, socio-demographic and socioeconomic data derived from public registers. Almost all received restorations, while periodontal treatment was received by dental services was dominated by periodontal services. Periodontal services were most prevalent in the capital and the most affluent areas. Relatively more extractions were related to low income and persons in least affluent areas. Total number of services was highest among women, persons with ≥20 teeth, persons living in the capital, and where the ratio user per dentist was low. For future planning of dental care for elderly, dental status, geographical and social area-based factors and to some degree gender, income, and education must be taken into consideration as all these factors seem to influence the future demand for dental services. © 2014 John Wiley & Sons A/S and The Gerodontology Association. Published by John Wiley & Sons Ltd.

SWOT Analysis of Dental Health Workforce in India: A Dental alarm.

Science.gov (United States)

Halappa, Mythri; B H, Naveen; Kumar, Santhosh; H, Sreenivasa

2014-11-01

India faces an acute shortage of health personnel. Together with inequalities in distribution of health workers, dental health workers also become a part contributing to it impeding the progress towards achievement of the Millennium Development Goals. To assess dental health-workforce distribution, identify inequalities in dental health-workers provision and report the impact of this mal distribution in India. Situational analysis done by using the primary data from the records of Dental Council of India. In India, 0.088% of dental health worker per 1000 population exists. Inequalities in the distribution of dentists exist in India. Certain states are experiencing an acute shortage of dental health personnel whereas certain cities are over fledged with dentists like Karnataka, Maharastra, Tamilnadu being states with high concentration & Jharkhand, Rajasthan, Uttaranchal being the least. Although the production of health workers has expanded greatly in recent years by increase in number of dental colleges the problems of imbalances in their distribution persist. In the race of increasing dentist population ratio in total, inequitable distribution of appropriately trained, motivated and supported dentists gives a mere feel of saturation in jobs making youngsters to not to choose dentistry as a career giving an alarm.

Dental therapists: a global perspective.

Science.gov (United States)

Nash, David A; Friedman, Jay W; Kardos, Thomas B; Kardos, Rosemary L; Schwarz, Eli; Satur, Julie; Berg, Darren G; Nasruddin, Jaafar; Mumghamba, Elifuraha G; Davenport, Elizabeth S; Nagel, Ron

2008-04-01

In 1921, New Zealand began training school dental nurses, subsequently deploying them throughout the country in school-based clinics providing basic dental care for children. The concept of training dental nurses, later to be designated dental therapists, was adopted by other countries as a means of improving access to care, particularly for children. This paper profiles six countries that utilise dental therapists, with a description of the training that therapists receive in these countries, and the context in which they practice. Based on available demographic information, it also updates the number of dental therapists practising globally, as well as the countries in which they practice. In several countries, dental therapy is now being integrated with dental hygiene in training and practice to create a new type of professional complementary to a dentist. Increasingly, dental therapists are permitted to treat adults as well as children. The paper also describes the status of a current initiative to introduce dental therapy to the United States. It concludes by suggesting that dental therapists can become valued members of the dental team throughout the world, helping to improve access to care and reducing existing disparities in oral health.

Anisotropic 3D texture synthesis with application to volume rendering

DEFF Research Database (Denmark)

Laursen, Lasse Farnung; Ersbøll, Bjarne Kjær; Bærentzen, Jakob Andreas

2011-01-01

images using a 12.1 megapixel camera. Next, we extend the volume rendering pipeline by creating a transfer function which yields not only color and opacity from the input intensity, but also texture coordinates for our synthesized 3D texture. Thus, we add texture to the volume rendered images....... This method is applied to a high quality visualization of a pig carcass, where samples of meat, bone, and fat have been used to produce the anisotropic 3D textures....

Smartphones and dental trauma: the current availability of apps for managing traumatic dental injuries.

Science.gov (United States)

Djemal, Serpil; Singh, Parmjit

2016-02-01

There is a general consensus regarding the lack of awareness regarding the emergency management of traumatic dental injuries amongst laypersons and dental professionals. This article aims to provide an overview of the apps available for traumatic dental injuries using smartphones. These apps may serve as a gateway for raising awareness of traumatic dental injuries. Three smartphone devices were used to access their respective app stores (Nokia Lumia 635 with Windows Phone OS 8.1; iPhone 5 with iOS 8.1; Samsung Galaxy Ace II with Android OS v2.3.6 Gingerbread). Nine phrases were searched: broken tooth/teeth; chipped tooth/teeth; dental emergency; dental injury; dental trauma; fractured tooth/teeth; knocked-out tooth/teeth; tooth/teeth injury; and tooth/teeth trauma. Seven apps for the Android and one app for the Apple operating system were relevant. The only Apple iOS app retrieved (Dental Trauma) was also found for the Android OS (Dental Trauma First Aid) and had the endorsement of the International Association of Dental Traumatology. AcciDent was the only app dedicated to traumatic dental injuries targeted solely towards dental professionals. Five other apps (Chipped Tooth Solution, Dental Crown Repair, Fixing Cracked Tooth, Repairing the Front Tooth and Solution to Broken Tooth) appeared to come from the same source (KBES). No traumatic dental injury apps were found for the Windows Phone OS. There are apps available for both patients and dentists that range in quality and on the whole lack real-life photographs. Future apps should continue to provide good quality, evidence-based and validated material. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Entrepreneurship in continuing dental education: a dental school perspective.

Science.gov (United States)

Liberto, Vincent N

2005-01-01

The definition of continuing dental education is presented, along with its benefits to the profession. The preeminence of dental schools in providing lifelong learning opportunities and freedom from commercial involvement that existed even twenty years ago has changed. Less than a quarter of CE takes place in school, and the focus there is increasingly on material with deep scientific background and hands-on learning. The newest innovations and those with the greatest commercial potential are taught elsewhere. Proposed changes in the ADA CERP standards would take on a "purist" approach that could place dental schools at a severe disadvantage while allowing "for profit" institutes to flourish and thus further undermine the role dental schools can play in providing quality professional development experiences.

The etiology of childhood dental fear: The role of dental and conditioning experiences.

NARCIS (Netherlands)

ten Berge, M.; Veerkamp, J.S.J.; Hoogstraten, J.

2002-01-01

This study aimed to examine the relative importance of invasive treatment experiences in the acquisition of dental fear in children. For this purpose, the complete dental history of 401 children (aged 5-10 years) was studied. The level of dental fear in these children was assessed using the Dental

Perception of Nepalese dental hygiene and dentistry students towards the dental hygienists profession.

Science.gov (United States)

Knevel, Rjm; Gussy, M G; Farmer, J; Karimi, L

2017-08-01

This study investigates student and stakeholder perceptions of the role of the dental hygienist in Nepal. The impact of these perceptions on the professionalization of dental hygienists is described whilst exploring the consequences for oral health workforce planning. Dentistry and dental hygiene students from one dental college in Nepal were asked to complete an anonymous questionnaire; 171 students returned the questionnaire containing a mix of forced response and open-ended items. Quantitative data were analysed using SPSS ® 22. These data were complemented with qualitative information from survey open questions and from semi-structured interviews with key informants from several relevant organizations. Qualitative data were manually analysed and coded. Data were triangulated to contextualize quantitative data. A high level of positive regard for the role of the dental hygienist in Nepal was evident amongst dentistry and dental hygiene students in this college. Both groups believe that the dental hygienist can play a major role in raising oral health awareness in Nepal. The scope of practice of the dental hygienist was unclear with issues surrounding the scope of practice and reports of illegal practice by dental hygienists. Significant differences (P dental hygiene and dentistry students in relation to their opinion regarding independent practice and the need of supervision by a dentist. Supervision of the dental hygienist by dentists and issues surrounding the scope of practice are polarizing the relationship between dentists, dental hygienists and the relevant professional organizations. This could hinder cooperation between these oral health professionals and might lead to underutilization of the dental hygienist. To improve the understanding about the roles of each oral health professional, establishing functional relationships and intraprofessional education involving dentistry and dental hygiene students needs to be introduced. This will benefit the

Clustering document fragments using background color and texture information

Science.gov (United States)

Chanda, Sukalpa; Franke, Katrin; Pal, Umapada

2012-01-01

Forensic analysis of questioned documents sometimes can be extensively data intensive. A forensic expert might need to analyze a heap of document fragments and in such cases to ensure reliability he/she should focus only on relevant evidences hidden in those document fragments. Relevant document retrieval needs finding of similar document fragments. One notion of obtaining such similar documents could be by using document fragment's physical characteristics like color, texture, etc. In this article we propose an automatic scheme to retrieve similar document fragments based on visual appearance of document paper and texture. Multispectral color characteristics using biologically inspired color differentiation techniques are implemented here. This is done by projecting document color characteristics to Lab color space. Gabor filter-based texture analysis is used to identify document texture. It is desired that document fragments from same source will have similar color and texture. For clustering similar document fragments of our test dataset we use a Self Organizing Map (SOM) of dimension 5×5, where the document color and texture information are used as features. We obtained an encouraging accuracy of 97.17% from 1063 test images.

Dental Anomalies and Dental Age Assessment in Treated Children with Acute Lymphoblastic Leukemia

OpenAIRE

Khojastepour, L; Zareifar, S; Ebrahimi, M

2014-01-01

Background This cross sectional study was performed to evaluate dental ages and incidence of dental anomalies in children treated for acute lymphoblastic leukemia (ALL). Methods and materials A total of 25 ALL patient who passed at least 2 years of chemotherapy and 25 healthy sex and age matched children were evaluated. Dental age as well as dental anomalies in shape, size, number, and structure was recorded based on their panoramic radiographies which were taken for dental purposes. Results ...

Dental sealants

Science.gov (United States)

... this page: //medlineplus.gov/ency/patientinstructions/000779.htm Dental sealants To use the sharing features on this ... case a sealant needs to be replaced. How Dental Sealants are Applied Your dentist applies sealants on ...

Non-masticatory uses of anterior teeth of Sima de los Huesos individuals (Sierra de Atapuerca, Spain).

Science.gov (United States)

Lozano, Marina; Bermúdez de Castro, José M; Carbonell, Eudald; Arsuaga, Juan Luis

2008-10-01

In this study we examine the labial and occlusal surfaces of incisors and canines of hominins recovered from the Sima de los Huesos (SH), middle Pleistocene site, in order to establish the possible extra-masticatory use of anterior teeth. We have compared the microwear of these fossils with microwear from the anterior teeth of Australian Aborigines, a population characterized by ethnographic evidence of the use of their teeth as a third hand. These two samples of teeth were microscopically analyzed using Scanning Electron Microscopy (SEM). Our results support the "cultural" origin of microwear observed on fossil teeth: we conclude that the SH hominins used their anterior teeth as a "third hand" for para- or extra-masticatory activities.

Mechanical properties and annealing texture of zirconium sheets

International Nuclear Information System (INIS)

Hanif-ur-Rehman; Khawaja, F.A.

1996-01-01

Mechanical properties like yield strength (YS), ultimate tensile strength(UTS), percentage elongation and annealing texture has been studied in sheets of commercially pure zirconium. The YS and UTS decrease as a function of annealing temperature up to 600 V, but both quantities have maximum value in sample annealed at 800 deg. C. The percentage elongation decreased with increase in annealing temperature up to 600 deg. C. A slight decrease and minimum value of percentage elongation was observed at 650 and 800 C respectively. The texture development in the annealed samples has been studied by the X-ray diffraction method. The sampled annealed at 800 deg. C showed a texture component (0001) [01 bar 10] with orientation density of about 8 times random, while the samples annealed at 600,650 and 700 deg. C showed a texture component (0001)[2 bar 110] with orientation density of about 5 times random. Thus it is concluded, that the texture component (0001)[2 bar 110] and (0001)[01 bar 10] at 650 and 800 geg. C respectively, may be the responsible for the increase in YS and UTS and decrease in percentage elongation at these temperatures. (author)

Doping profile measurement on textured silicon surface

Science.gov (United States)

Essa, Zahi; Taleb, Nadjib; Sermage, Bernard; Broussillou, Cédric; Bazer-Bachi, Barbara; Quillec, Maurice

2018-04-01

In crystalline silicon solar cells, the front surface is textured in order to lower the reflection of the incident light and increase the efficiency of the cell. This texturing whose dimensions are a few micrometers wide and high, often makes it difficult to determine the doping profile measurement. We have measured by secondary ion mass spectrometry (SIMS) and electrochemical capacitance voltage profiling the doping profile of implanted phosphorus in alkaline textured and in polished monocrystalline silicon wafers. The paper shows that SIMS gives accurate results provided the primary ion impact angle is small enough. Moreover, the comparison between these two techniques gives an estimation of the concentration of electrically inactive phosphorus atoms.

Microstructure and mechanical characteristics of laser coating-texturing alloying dimples

International Nuclear Information System (INIS)

Wan Daping; Chen Bingkui; Shao Yimin; Wang Shilong; Hu Dejin

2008-01-01

A novel laser coating-texturing (LCT) technique was proposed to achieve appropriate surface topographies and frictional behaviour. The LCT process was realized by applying laser pulses at very high repetition rate to produce innumerable micro-craters with required shape profile on the surface of the workpiece. Moreover, surface alloying of the dimples was carried out by melting submicron WC-TiC-Co alloy powder on the substrates. Morphology and microstructures of the texturing layers were characterised using optical microscopy (OM), scanning electron microscopy (SEM), and X-ray diffraction (XRD). Mechanical properties of the textured samples were evaluated by abrasive resistance tests and microhardness measurement. Experimental results show that good fusion bonding between the texturing layers and the substrate has been formed, and the texturing layers are mainly composed of dense and hard fine-grained structures. The abrasive wear resistance of the laser coating-textured surface was 10 times higher than that of the substrates. The average surface microhardness values were as high as 830 HV.

The promise and limits of PET texture analysis.

Science.gov (United States)

Cheng, Nai-Ming; Fang, Yu-Hua Dean; Yen, Tzu-Chen

2013-11-01

Metabolic heterogeneity is a recognized characteristic of malignant tumors. Positron emission tomography (PET) texture analysis evaluated intratumoral heterogeneity in the uptake of (18)F-fluorodeoxyglucose. There were recent evidences that PET textural features were of prognostic significance in patients with different solid tumors. Unfortunately, there are still crucial standardization challenges to transform PET texture parameters from their current use as research tools into the arena of validated technologies for use in oncology practice. Testing its generalizability, robustness, consistency, and limitations is necessary before implementing it in daily patient care.

Effects of crystallographic texture on stress-migration resistance in copper thin films

International Nuclear Information System (INIS)

Koike, J.; Wada, M.; Sanada, M.; Maruyama, K.

2002-01-01

The crystallographic texture of heat-treated Cu thin films and its effects on stress-migration resistance were studied as a function of film thickness within a range of 50-900 nm. All as-deposited films had (111) texture. After heat treatment at 723 K, texture transition from (111) to (100) was observed in films of thickness greater than 300 nm. The (111) texture films after heat treatment showed severe stress migration; in contrast, the (100) texture films showed no noticeable stress migration. The observed stress-migration resistance in the (100) texture films can be attributed to the absence of twins and to lower thermal stress as compared with the (111) texture films

17th International Conference on Textures of Materials (ICOTOM 17)

International Nuclear Information System (INIS)

Skrotzki, Werner; Oertel, Carl-Georg

2015-01-01

The 17th International Conference on Textures of Materials (ICOTOM 17) took place in Dresden, Germany, August 24-29, 2014. It belongs to the 'triennial' series of ICOTOM meetings with a long tradition, starting in 1969 - Clausthal, 1971 - Cracow, 1973 - Pont-à-Mousson, 1975 - Cambridge, 1978 - Aachen, 1981 - Tokyo, 1984 - Noordwijkerhout, 1987 - Santa Fe, 1990 - Avignon, 1993 - Clausthal, 1996 - Xian, 1999 - Montreal, 2002 - Seoul, 2005 - Leuven, 2008 - Pittsburgh, 2011 - Mumbai, 2014 - Dresden. ICOTOM 17 was hosted by the Dresden University of Technology, Institute of Structural Physics. Following the tradition of the ICOTOM conferences, the main focus of ICOTOM-17 was to promote and strengthen the fundamental understanding of the basic processes that govern the formation of texture and its relation to the properties of polycrystalline materials. Nonetheless, it was the aim to forge links between basic research on model materials and applied research on engineering materials of technical importance. Thus, ICOTOM 17 provided a forum for the presentation and discussion of recent progress in research of texture and related anisotropy of mechanical and functional properties of all kinds of polycrystalline materials including natural materials like rocks. Particular attention was paid to recent advances in texture measurement and analysis as well as modeling of texture development for all kinds of processes like solidification, plastic deformation, recrystallization and grain growth, phase transformations, thin film deposition, etc. Hence, ICOTOM 17 was of great interest to materials scientists, engineers from many different areas and geoscientists. The topics covered by ICOTOM 17 were: 1. Mathematical, numerical and statistical methods of texture analysis 2. Deformation textures 3. Crystallization, recrystallization and growth textures 4. Transformation textures 5. Textures in functional materials 6. Textures in advanced materials 7. Textures in rocks 8

Knowledge and attitude towards preventive dental care among dental faculties in Bangalore city

Directory of Open Access Journals (Sweden)

Nikhil Ahuja

2014-01-01

Full Text Available Background and Objectives: Preventive approach in dental practice has been cited as a reason for the decline in oral diseases and as a predominant part of the service-mix of dental practices in the future. Dental faculty′s knowledge and attitude toward prevention are important, since they have exceptionally important direct and indirect roles in shaping student′s preventive orientation and also potentially influencing their patient′s ability to take care of their teeth. Thus, this study was conducted to assess knowledge and attitudes toward preventive dental care among dental faculties and their relation to demographic and professional characteristics. Materials and Methods: A cross-sectional study was conducted among dental faculties in Bangalore city. Of 17 dental colleges, 4 were selected by simple random sampling. A total of 218 dental faculties was individually asked to complete a pretested questionnaire. The questionnaire requested information on dental faculty′s demographic and professional characteristics and their knowledge and attitudes toward preventive dental care. Descriptive, Chi-square tests, and ANOVA were used to analyze the data. Results: The highest knowledge was seen among dental faculties regarding prevention of malocclusion (3.51 ± 1.02 followed by oral cancer (2.95 ± 1.09 and periodontal diseases (2.86 ± 1.02. The least knowledge was seen for the prevention of caries (2.63 ± 1.35. The most positive attitudes regarding preventive dentistry was characterized as being essential (6.34 ± 1.05, useful (6.32 ± 1.07 and valuable (6.27 ± 1.00. Statistically significant differences were found in relation to knowledge and attitudes for all demographic and professional characteristics except for gender and Department of Teaching. Conclusion: Dental faculty seems to have differing levels of knowledge regarding oral diseases with positive attitudes seen regarding preventive dentistry. Continuing education activities and

Regenerative medicine in dental and oral tissues: Dental pulp mesenchymal stem cell

Directory of Open Access Journals (Sweden)

Janti Sudiono

2017-08-01

Full Text Available Background. Regenerative medicine is a new therapeutic modality using cell, stem cell and tissue engineering technologies. Purpose. To describe the regenerative capacity of dental pulp mesenchymal stem cell. Review. In dentistry, stem cell and tissue engineering technologies develop incredibly and attract great interest, due to the capacity to facilitate innovation in dental material and regeneration of dental and oral tissues. Mesenchymal stem cells derived from dental pulp, periodontal ligament and dental follicle, can be isolated, cultured and differentiated into various cells, so that can be useful for regeneration of dental, nerves, periodontal and bone tissues. Tissue engineering is a technology in reconstructive biology, which utilizes mechanical, cellular, or biological mediators to facilitate regeneration or reconstruction of a particular tissue. The multipotency, high proliferation rates and accessibility, make dental pulp as an attractive source of mesenchymal stem cells for tissue regeneration. Revitalized dental pulp and continued root development is the focus of regenerative endodontic while biological techniques that can restore lost alveolar bone, periodontal ligament, and root cementum is the focus of regenerative periodontic. Conclucion. Dentin-derived morphogens such as BMP are known to be involved in the regulation of odontogenesis. The multipotency and angiogenic capacity of DPSCs as the regenerative capacity of human dentin / pulp complex indicated that dental pulp may contain progenitors that are responsible for dentin repair. The human periodontal ligament is a viable alternative source for possible primitive precursors to be used in stem cell therapy.

Dental anxiety and personality: investigating the relationship between dental anxiety and self-consciousness.

Science.gov (United States)

Economou, George C

2003-09-01

This study investigated whether personality plays a role in a condition called dental anxiety. Specifically, the study examined the relationship between dental anxiety (the negative response to the stress elicited from a dental interaction) and self-consciousness (the tendency to evaluate aspects of oneself that are subject to private and public display). The purpose of this study was to identify the characteristics possessed by dentally anxious individuals who face potential health risks because of their avoidance. Sixty York University undergraduate students were recruited by convenience sampling to participate. These subjects completed Corah's Dental Anxiety Scale and the Self-Consciousness Scale. The Self-Consciousness Scale consists of three subscales, including private self-consciousness, public self-consciousness, and social anxiety. Results indicated an 0.54 significant correlation between dental anxiety and self-consciousness. The public self-consciousness and social anxiety subscales correlated the most with dental anxiety. Furthermore, the data did not indicate a significant moderating relationship for gender between the two aforementioned variables. These results contribute to the establishment of personality characteristics as one of the dimensions determining dental anxiety.

Inaccurate Dental Charting in an Audit of 1128 General Dental Practice Records.

Science.gov (United States)

Brown, Nathan L; Jephcote, Victoria E L

2017-03-01

Fourteen dentists at different practices in the UK assessed the dental charts of 1128 patients who were new to the dentist but not new to the practice; 44% of the dental charts were found to be inaccurate. Inaccuracy of the individual practice-based charts ranged between 16% for the best performing practices to 83% for the worst: 5% of dental charts had too many teeth charted and 5% had too few teeth charted; 13% of charts had missed amalgam restorations and 18% had missed tooth-coloured restorations; 5% of charts had amalgam restorations recorded but with the surfaces incorrect (eg an MO restoration charted but a DO restoration actually present); 9% of charts had tooth-coloured restoration surfaces incorrectly recorded. For 7.5% of charts, amalgams were charted but not actually present. Other inaccuracies were also noted. The authors reinforce the requirements of the GDC, the advice of defence organizations, and the forensic importance of accurate dental charts. Clinical relevance: Dental charting forms part of the patient’s dental records, and the GDC requires dentists to maintain complete and accurate dental records.

Filtering Color Mapped Textures and Surfaces

OpenAIRE

Heitz , Eric; Nowrouzezahrai , Derek; Poulin , Pierre; Neyret , Fabrice

2013-01-01

International audience; Color map textures applied directly to surfaces, to geometric microsurface details, or to procedural functions (such as noise), are commonly used to enhance visual detail. Their simplicity and ability to mimic a wide range of realistic appearances have led to their adoption in many rendering problems. As with any textured or geometric detail, proper filtering is needed to reduce aliasing when viewed across a range of distances, but accurate and efficient color map filt...

A dynamical system approach to texel identification in regular textures

NARCIS (Netherlands)

Grigorescu, S.E.; Petkov, N.; Loncaric, S; Neri, A; Babic, H

2003-01-01

We propose a texture analysis method based on Rényi’s entropies. The method aims at identifying texels in regular textures by searching for the smallest window through which the minimum number of different visual patterns is observed when moving the window over a given texture. The experimental

Influence of texture on fracture toughness of zircaloy cladding

International Nuclear Information System (INIS)

Grigoriev, V.; Andersson, Stefan

1997-06-01

The correlation between texture and fracture toughness of Zircaloy 2 cladding has been investigated in connection with axial cracks in fuel rods. The texture of the cladding determines the anisotropy of plasticity of the cladding which, in turn, should influence the strain conditions at the crack-tip. Plastic strains in the cladding under uniaxial tension were characterised by means of the anisotropy constants F, G and H calculated according to Hill's theory. Test temperatures between 20 and 300 deg C do not influence the F, G and H values. Any significant effect of hydrogen (about 500 wtppm) on the anisotropy constants F, G and H has not been revealed at a test temperature of 300 deg C. The results, obtained for stress-relieved and recrystallized cladding with different texture, show an obvious influence of texture on the fracture toughness of Zircaloy cladding. A higher fracture toughness has been found for cladding with more radial texture

Influence of texture on fracture toughness of zircaloy cladding

Energy Technology Data Exchange (ETDEWEB)

Grigoriev, V. [Studsvik Material AB, Nykoeping (Sweden); Andersson, Stefan [Royal Inst. of Tech., Stockholm (Sweden)

1997-06-01

The correlation between texture and fracture toughness of Zircaloy 2 cladding has been investigated in connection with axial cracks in fuel rods. The texture of the cladding determines the anisotropy of plasticity of the cladding which, in turn, should influence the strain conditions at the crack-tip. Plastic strains in the cladding under uniaxial tension were characterised by means of the anisotropy constants F, G and H calculated according to Hill`s theory. Test temperatures between 20 and 300 deg C do not influence the F, G and H values. Any significant effect of hydrogen (about 500 wtppm) on the anisotropy constants F, G and H has not been revealed at a test temperature of 300 deg C. The results, obtained for stress-relieved and recrystallized cladding with different texture, show an obvious influence of texture on the fracture toughness of Zircaloy cladding. A higher fracture toughness has been found for cladding with more radial texture. With a 2 page summary in Swedish. 32 refs, 18 figs.

Automatic inspection of textured surfaces by support vector machines

Science.gov (United States)

Jahanbin, Sina; Bovik, Alan C.; Pérez, Eduardo; Nair, Dinesh

2009-08-01

Automatic inspection of manufactured products with natural looking textures is a challenging task. Products such as tiles, textile, leather, and lumber project image textures that cannot be modeled as periodic or otherwise regular; therefore, a stochastic modeling of local intensity distribution is required. An inspection system to replace human inspectors should be flexible in detecting flaws such as scratches, cracks, and stains occurring in various shapes and sizes that have never been seen before. A computer vision algorithm is proposed in this paper that extracts local statistical features from grey-level texture images decomposed with wavelet frames into subbands of various orientations and scales. The local features extracted are second order statistics derived from grey-level co-occurrence matrices. Subsequently, a support vector machine (SVM) classifier is trained to learn a general description of normal texture from defect-free samples. This algorithm is implemented in LabVIEW and is capable of processing natural texture images in real-time.

Texture alteration detection in bitemporal images of lesions with psoriasis

DEFF Research Database (Denmark)

Maletti, Gabriela Mariel; Ersbøll, Bjarne Kjær

2003-01-01

The objective of this work is to explore the feasibility of quantifying textural change between pairs of segmented patterns without registering them. The Multi-variate Alteration Detection (M.A.D.) Transform is applied to a texture model constructed with the data of segmented psoriasis lesions im...... images. The texture model is Haralick's co-occurrence matrix, which is computed and normalized for each single band with the equalized data of a given lesion. The contribution of each single color band to the textural change is analyzed....

Robust constraint on cosmic textures from the cosmic microwave background.

Science.gov (United States)

Feeney, Stephen M; Johnson, Matthew C; Mortlock, Daniel J; Peiris, Hiranya V

2012-06-15

Fluctuations in the cosmic microwave background (CMB) contain information which has been pivotal in establishing the current cosmological model. These data can also be used to test well-motivated additions to this model, such as cosmic textures. Textures are a type of topological defect that can be produced during a cosmological phase transition in the early Universe, and which leave characteristic hot and cold spots in the CMB. We apply bayesian methods to carry out a rigorous test of the texture hypothesis, using full-sky data from the Wilkinson Microwave Anisotropy Probe. We conclude that current data do not warrant augmenting the standard cosmological model with textures. We rule out at 95% confidence models that predict more than 6 detectable cosmic textures on the full sky.

Chemometric approach to texture profile analysis of kombucha fermented milk products.

Science.gov (United States)

Malbaša, Radomir; Jevrić, Lidija; Lončar, Eva; Vitas, Jasmina; Podunavac-Kuzmanović, Sanja; Milanović, Spasenija; Kovačević, Strahinja

2015-09-01

In the present work, relationships between the textural characteristics of fermented milk products obtained by kombucha inoculums with various teas were investigated by using chemometric analysis. The presented data which describe numerically the textural characteristics (firmness, consistency, cohesiveness and index of viscosity) were analysed. The quadratic correlation was determined between the textural characteristics of fermented milk products obtained at fermentation temperatures of 40 and 43 °C, using milk with 0.8, 1.6 and 2.8% milk fat and kombucha inoculums cultivated on the extracts of peppermint, stinging nettle, wild thyme and winter savory. Hierarchical cluster analysis (HCA) was performed to identify the similarities among the fermented products. The best mathematical models predicting the textural characteristics of investigated samples were developed. The results of this study indicate that textural characteristics of sample based on winter savory have a significant effect on textural characteristics of samples based on peppermint, stinging nettle and wild thyme, which can be very useful in the determination of products texture profile.

Effect of surface texturing on friction properties of WC/Co cemented carbide

International Nuclear Information System (INIS)

Wu, Ze; Deng, Jianxin; Xing, Youqiang; Cheng, Hongwei; Zhao, Jun

2012-01-01

Highlights: ► Tribological properties of surface textured WC/Co cemented carbide were studied. ► Textured surfaces have better performance of antifriction and antiwear. ► Area density of textures has significant effect on tribological performance. -- Abstract: An experimental study was carried out to investigate the tribological properties of different surface textured WC/Co cemented carbide. The influence of applied load, sliding speed and area density of textures on frictional performance of surface textured patterns was investigated by Taguchi method. Results show that the textured surfaces filled with molybdenum disulfide solid lubricants can reduce the average friction coefficient, wear rates of Ti–6Al–4V alloy balls and adhesion of Ti–6Al–4V alloy materials on the worn track of cemented carbide compared with un-textured ones. Variance analysis of the experimental data indicates that the area density of textures plays major contribution of both average friction coefficient and wear rate of Ti–6Al–4V alloy balls. Higher area density of textures is beneficial to improve tribological performance of the cemented carbide samples. Sliding speed seems to have no effect on the tribological performance of textured surfaces within the reliability interval of 90%. Applied load has effect on both average friction coefficient and wear rate of Ti–6Al–4V alloy balls at the reliability interval of 95%.

Dental magnetic resonance tomography (dental-MRT) as a method for imaging of the maxillo-mandibular bone; Dentale Magnetresonanztomographie (Dental-MRT) als Verfahren zur Darstellung des maxillomandibulaeren Zahnhalteapparates

Energy Technology Data Exchange (ETDEWEB)

Gahleitner, A.; Nasel, C.; Schick, S.; Dorffner, S.; Imhof, H.; Trattnig, S. [Wien Univ. (Austria). Abt. fuer Osteologie; Bernhart, T.; Mailath, G.; Watzek, G. [Wien Univ. (Austria). Abt. fuer Orale Chirurgie

1998-10-01

Purpose: To establish a new method for dental imaging using magnetic resonance tomography named Dental-MRT and to demonstrate its usefulness in diagnosing dentogen pathologies of the mandible and maxilla. Methods: Seven healthy volunteers, three patients with pulpitis, two patients with dentigerous cysts, two patients after tooth transplantation, and three patients with atrophic mandibles have been evaluated. Optimized axial T{sub 1}- and T{sub 2}-weighted gradient echo and spin echo sequences in 2D and 3D technique have been established to perform studies of the jaws. The acquired images were reconstructed with a standard dental software package on a workstation as panorama and cross-sectional views of the mandible or maxilla. Results: The entire maxillo-mandibular bone, teeth, dental pulp, and the content of the mandibular canal were well depicted. Patients with pulpitis demonstrate bone marrow edema in the periapical region. Dentigerous cysts and their relation to the surrounding structures are clearly shown. After contrast media administration marked enhancement of the dental pulp can be demonstrated. Conclusion: Dental-MRT promises to provide a new tool for visualization and detection of dental diseases. (orig.) [Deutsch] Ziel: Das Vorstellen der Dental-MRT als neue Methode zur Darstellung des Ober- und Unterkiefers und ihre Anwendung bei der Diagnose zahnmedizinischer Erkankungen. Methoden: 7 gesunde Probanden, drei Patienten mit Pulpitis, zwei Patienten mit odontogenen Zysten, zwei Patienten nach Zahntransplantationen und drei Patienten mit atrophem Unterkiefer wurden untersucht. Optimierte axiale T{sub 1}- und T{sub 2}-gewichtete Gradienten-Echo- und Spin-Echo-Sequenzen in 2D und 3D-Technik wurden angewandt. Nach der Untersuchung wurden Panoramaschnitte und dentale Rekonstruktionen des Ober- und Unterkiefers, unter Verwendung einer gebraeuchlichen Dental-Software, angefertigt. Ergebnisse: Der gesamte Kieferbereich, Zaehne, Pulpa und der Inhalt des

Diagnosing dental caries in populations with different levels of dental fluorosis

DEFF Research Database (Denmark)

Nyvad, Bente; Machiulskiene, Vita; Fejerskov, Ole

2009-01-01

concentrations of 0.3 and 1.1 ppm (0.3 and 1.1 mg/l) fluoride, respectively, 150 children were clinically examined twice, 2 wk apart, for dental fluorosis, using the Thylstrup-Fejerskov index (TF index), and for dental caries using the Nyvad visual-tactile caries criteria. The prevalence of dental fluorosis......, a pronounced dental fluorosis background did not reduce the reliability of the caries recordings, which appeared to be slightly less reliable at very low levels of dental fluorosis.......The aim of this study was to assess the reliability of the Nyvad visual-tactile caries-diagnostic criteria when used among children who have been lifelong residents in areas with 'optimal' or low concentrations of fluoride in the drinking water. In each of two areas with drinking water fluoride...

Utilization of Dental Services in Public Health Center: Dental Attendance, Awareness and Felt Needs.

Science.gov (United States)

Pewa, Preksha; Garla, Bharath K; Dagli, Rushabh; Bhateja, Geetika Arora; Solanki, Jitendra

2015-10-01

In rural India, dental diseases occur due to many factors, which includes inadequate or improper use of fluoride and a lack of knowledge regarding oral health and oral hygiene, which prevent proper screening and dental care of oral diseases. The objective of the study was to evaluate the dental attendance, awareness and utilization of dental services in public health center. A cross-sectional study was conducted among 251 study subjects who were visiting dental outpatient department (OPD) of public health centre (PHC), Guda Bishnoi, and Jodhpur using a pretested proforma from month of July 2014 to October 2014. A pretested questionnaire was used to collect the data regarding socioeconomic status and demographic factors affecting the utilization of dental services. Pearson's Chi-square test and step-wise logistic regression were applied for the analysis. Statistically significant results were found in relation to age, educational status, socioeconomic status and gender with dental attendance, dental awareness and felt needs. p-value dental services, thereby increasing the oral health status of the population.

Escova dental e dedeira na remoção da placa bacteriana dental em cães The dental brush and thumb-stall in the removal of the dental plaque in dogs

Directory of Open Access Journals (Sweden)

Tânia Berbert Ferreira Lima

2004-02-01

Full Text Available A placa bacteriana é fator primário na formação de gengivite, cálculo dentário, halitose e doença periodontal. Objetivou-se avaliar a quantidade de placa bacteriana dental removida pela escova dental e dedeira. Foram utilizados 60 cães machos e fêmeas de diferentes raças, idade e peso, divididos em dois grupos. O índice Logan & Boyce foi utilizados para quantificar a placa bacteriana antes e após a escovação. Observou-se diferença estatística (p0,05 entre a utilização da escova dental e a dedeira.The dental plaque is the primary factor for gingivitis formation, dental calculus, oral malodor and periodontal disease. To evaluate the amount of dental plaque removed by the dental brush and thumb-stall, 60 male and female dogs of different races, age and weight were divided in two groups and studies. The index of Logan & Boyce was used to quantify the dental plaque before and after the toothbrush. Statistical difference was observed (p 0.05 between the use of the dental brush and the thumb-stall.

The role of friction in perceived oral texture

NARCIS (Netherlands)

Wijk, de R.A.; Prinz, J.F.

2005-01-01

Instrumentally measured in vitro friction in semi-solid foods was related to oral texture sensations. Increased fat content resulted in lower sensations of roughness, higher sensations of creaminess, and lower friction, suggesting that lubrication is the mechanism by which fat affects oral texture

Instrumental textural perception of food and comparative biomaterials

Science.gov (United States)

Texture is an important food quality attribute affecting consumer acceptance. Consumers characterize texture as either crispy or crunchy, and the moisture content and internal structure of the products are significant factors in its perception. Exposing an extruded corn snack (ECS), an extruded biod...

M-HinTS: Mimicking Humans in Texture Sorting

NARCIS (Netherlands)

van den Broek, Egon; Rogowitz, Bernice E.; van Rikxoort, Eva M.; Pappas, Thrasyvoulos N.; Kok, Thijs; Daly, Scott J.; Schouten, Theo E.

2006-01-01

Various texture analysis algorithms have been developed the last decades. However, no computational model has arisen that mimics human texture perception adequately. In 2000, Payne, Hepplewhite, and Stoneham and in 2005, Van Rikxoort, Van den Broek, and Schouten achieved mappings between humans and

An audit of dental prescriptions between clinics and dental laboratories.

Science.gov (United States)

Stewart, C A

2011-08-12

To discover the quality of written instructions from dentists to dental technicians and the nature of non-compliant prescriptions. An audit of laboratory prescription compliance was conducted within an NHS Trust Dental Teaching Hospital to determine the level of communication between dentists and dental technicians. One hundred and fifty prescriptions were audited from dental undergraduates and qualified dentists throughout the different departments. A total of two-thirds of prescriptions were considered non-compliant and failed to meet relevant ethical and legal guidelines. This problem was seen throughout all departments and at all professional levels. A breakdown in communication between dentists and technicians through the use of prescriptions is evident even within a close working environment.

Intrinsic Problems In Determination Of Soil Texture In Calcareous Soils Of Arid Zones

Directory of Open Access Journals (Sweden)

Mozna A. Ahmed

2017-08-01

Full Text Available This study aimed at studying the effect of removal of CaCO3 on the texture of the soil profile and that of the control section in some Aridisols of the Sudan. Sixty soil profiles were sampled from Shendi area latitude1636 and longitude 33 48 River Nile State Sudan. These soils were analyzed for CaCO3 and 20 of these profiles were found to be of relatively appreciable calcareousness and were therefore selected for this study. The following three weighted soil textures were determined 1 before any removal of the CaCO3 Texture1 2 after the removal of CaCO3 Texture2 3 after amending the texture by adding the clay sized CaCO3 to the silt fraction Texture 3. Statistical analysis revealed significant differences among soil separates in the three textures except between clay of T2 and clay of T3 and among sand fractions in the three textures. That was not unexpected because the first texture included both mineral separates plus their equivalent size of CaCO3 the second texture included only the mineral separates in complete absence of CaCO3 while texture 3 was an amended texture. The change in the textural class amounted to 72 of the profiles. Statistical analysis in the weighted texture of the control section revealed that this texture was not affected except in two profiles. That could be attributed to the fact that the clay content of the soils of the study area did not fall at or near the boundary between any two major textural classes used in the Soil Taxonomy. The size of the CaCO3 was found in the order of clay size silt size sand size.

Awareness of Infection Control Protocols Among Dental Students in Babylon Dental Faculty

Directory of Open Access Journals (Sweden)

Khalil Ibraheem Zaidan

2018-02-01

Full Text Available Infection control and knowledge of common "infectious diseases" is essential for safe dental practice. Conveyance of infectious diseases is likely "from one individual to another during dental procedures", thorough" blood-borne" viruses and bacteria   "such as hepatitis" , human immunodeficiency virus (HIV. Thence in dental practice, the  sterilization and particular protection  is of most importance Process in  dental procedures,  and patient sponsor settings seek specific strategies guide to prevent the  transmission of diseases among dental students , oral verdure care staffs and their patients. Aim: Current study highlight  the methods and behavior  to evaluate  the  benefits of awareness, stance and pursuit of infection control between dental students in training dental clinic at Babylon  dental collage . Materials and Methods: A cross-sectional wipe using a rear ordered questionnaire was executed. The reconnaissance consisted of 38 closed-ended questions that included the key areas of infection control, including hand hygiene, personal preservation, sterilization and disinfection and ecological infection monitoring. There were also questions to elicit perceptions regarding the treatment of HBV and HIV/AIDS patients. Results: Survey study was done for dental students replied to the reconnaissance. Their situation and realization across infection control in college teaching  clinic .The results were assorted between 100% were orderly using gloves and 96% mask   with patient to 6% were orderly wore eye glasses. The type of sterilization of instrument was 90% autoclave and 10% oven and from analysis of data revealed most teaching clinics devoid of instruction post about control of infection control measures   Conclusion: "Improved compliance with recommended infection control procedures is required for all dentists" and graduated dental students  predestined in the existing project. Enduring instruction "programs and short

What is dental ecology?

Science.gov (United States)

Cuozzo, Frank P; Sauther, Michelle L

2012-06-01

Teeth have long been used as indicators of primate ecology. Early work focused on the links between dental morphology, diet, and behavior, with more recent years emphasizing dental wear, microstructure, development, and biogeochemistry, to understand primate ecology. Our study of Lemur catta at the Beza Mahafaly Special Reserve, Madagascar, has revealed an unusual pattern of severe tooth wear and frequent tooth loss, primarily the result of consuming a fallback food for which these primates are not dentally adapted. Interpreting these data was only possible by combining our areas of expertise (dental anatomy [FC] and primate ecology [MS]). By integrating theoretical, methodological, and applied aspects of both areas of research, we adopted the term "dental ecology"-defined as the broad study of how teeth respond to the environment. Specifically, we view dental ecology as an interpretive framework using teeth as a vehicle for understanding an organism's ecology, which builds upon earlier work, but creates a new synthesis of anatomy and ecology that is only possible with detailed knowledge of living primates. This framework includes (1) identifying patterns of dental pathology and tooth use-wear, within the context of feeding ecology, behavior, habitat variation, and anthropogenic change, (2) assessing ways in which dental development and biogeochemical signals can reflect habitat, environmental change and/or stress, and (3) how dental microstructure and macro-morphology are adapted to, and reflect feeding ecology. Here we define dental ecology, provide a short summary of the development of this perspective, and place our new work into this context. Copyright © 2012 Wiley Periodicals, Inc.

Fear of dental pain in Italian children: child personality traits and parental dental fear.

Science.gov (United States)

D'Alessandro, Giovanni; Alkhamis, Nadia; Mattarozzi, Katia; Mazzetti, Michela; Piana, Gabriela

2016-06-01

Dental anxiety could impede dental treatment in children. Evidence shows that parents' fear of dentists contributes to children's anxiety towards dentists. The aim of the present study was to determine whether and to what extent: a) parents' anxiety and depression personality traits, b) parent's dental fear, and c) child personality traits can predict children's dental anxiety in an Italian population. One hundred and four children (5-14 years old) and one of their parents participated in the study. Well-known and validated questionnaires were administered to children (MCDASf, CFSS-DS, TAD) and parents (FDPQ, STAI Y1, Y2, and BDI-II). Dental anxiety is significantly associated with the anxiety personality trait and depression of the child and with parental fear of dental pain. A hierarchical regression analysis showed that, regardless of age and gender, the best predictor of child dental anxiety is parent's fear of dental pain, rather than relatively stable temperaments of the child. In line with the literature concerning adults, these findings highlight the children dental anxiety as a complex phenomena consisting of different components, including the child's personality traits (anxiety trait and depression) and parents' dental fear. Clinical implications of this evidence are discussed. © 2015 American Association of Public Health Dentistry.

Research of second harmonic generation images based on texture analysis

Science.gov (United States)

Liu, Yao; Li, Yan; Gong, Haiming; Zhu, Xiaoqin; Huang, Zufang; Chen, Guannan

2014-09-01

Texture analysis plays a crucial role in identifying objects or regions of interest in an image. It has been applied to a variety of medical image processing, ranging from the detection of disease and the segmentation of specific anatomical structures, to differentiation between healthy and pathological tissues. Second harmonic generation (SHG) microscopy as a potential noninvasive tool for imaging biological tissues has been widely used in medicine, with reduced phototoxicity and photobleaching. In this paper, we clarified the principles of texture analysis including statistical, transform, structural and model-based methods and gave examples of its applications, reviewing studies of the technique. Moreover, we tried to apply texture analysis to the SHG images for the differentiation of human skin scar tissues. Texture analysis method based on local binary pattern (LBP) and wavelet transform was used to extract texture features of SHG images from collagen in normal and abnormal scars, and then the scar SHG images were classified into normal or abnormal ones. Compared with other texture analysis methods with respect to the receiver operating characteristic analysis, LBP combined with wavelet transform was demonstrated to achieve higher accuracy. It can provide a new way for clinical diagnosis of scar types. At last, future development of texture analysis in SHG images were discussed.

Dental responsibility loadings and the relative value of dental services.

Science.gov (United States)

Teusner, D N; Ju, X; Brennan, D S

2017-09-01

To estimate responsibility loadings for a comprehensive list of dental services, providing a standardized unit of clinical work effort. Dentists (n = 2500) randomly sampled from the Australian Dental Association membership (2011) were randomly assigned to one of 25 panels. Panels were surveyed by questionnaires eliciting responsibility loadings for eight common dental services (core items) and approximately 12 other items unique to that questionnaire. In total, loadings were elicited for 299 items listed in the Australian Dental Schedule 9th Edition. Data were weighted to reflect the age and sex distribution of the workforce. To assess reliability, regression models assessed differences in core item loadings by panel assignment. Estimated loadings were described by reporting the median and mean. Response rate was 37%. Panel composition did not vary by practitioner characteristics. Core item loadings did not vary by panel assignment. Oral surgery and endodontic service areas had the highest proportion (91%) of services with median loadings ≥1.5, followed by prosthodontics (78%), periodontics (76%), orthodontics (63%), restorative (62%) and diagnostic services (31%). Preventive services had median loadings ≤1.25. Dental responsibility loadings estimated by this study can be applied in the development of relative value scales. © 2017 Australian Dental Association.

The relationship of dental caries and dental fear in Malaysian adolescents: a latent variable approach

Science.gov (United States)

2014-01-01

Background To investigate the role of geography (place of residence) as a moderator in the relationship between dental caries disease and treatment experience and dental fear in 16-year-olds living in Malaysia. Methods A multi-stage-stratified sampling method was employed. Five hundred and three, 16-year-olds from 6 government secondary schools participated in this study. The questionnaire examined participants’ demographic profile and assessed their dental fear using the Dental Fear Survey (DFS). The clinical examination consisted of the DMFT as the outcome measure of dental caries disease and treatment experience by a single examiner (ICC = 0.98). Structural equation modelling inspected the relationship between dental fear and dental caries disease and treatment experience. Results The mean DMFT was 2.76 (SD 3.25). The DT, MT and FT components were 0.64 (SD 1.25), 0.14 (SD 0.56) and 1.98 (SD 2.43) respectively. Rural compared with urban adolescents had significantly greater mean numbers of decayed and missing teeth. The mean DFS score was 40.8 (SD 12.4). Rural compared with urban adolescents had significantly higher mean scores for physical symptoms of dental fear. The correlation between dental fear (DFS) and dental caries disease and treatment experience (DMFT) was 0.29, p dental caries disease and treatment experience. The strength of the relationship between dental fear and dental caries disease and treatment experience varied in accordance with place of residence. Conclusion In conclusion a relationship between dental fear and dental caries disease and treatment experience was shown to exist in 16-year-old adolescents living in Malaysia. This study showed that the rural–urban dichotomy acted as a moderator upon this relationship. PMID:24621226

American Dental Education Association

Science.gov (United States)

... Interest Groups ADEA Governance Documents and Publications ADEA Dental Faculty Code of Conduct ADEA Bylaws ADEAGies Foundation ... Benefits for Faculty ADEA Member Benefits for Allied Dental Programs ADEA Member Benefits for Dental Schools ADEA ...

Dental students′ compliance with antibiotic prescribing guidelines for dental infections in children

Directory of Open Access Journals (Sweden)

Yee Chen Wong

2016-01-01

Full Text Available Context: To investigate the antibiotic prescribing training received by dental students, clinical experience in treating child patients, awareness of antibiotic prescribing guidelines, preparedness in antibiotic prescribing, and compliance with antibiotic prescribing guidelines for the management of dental infections in children. Methods: This was a cross-sectional study involving final year dentals students from Malaysian and Asian dental schools. A self-administered questionnaire consisting of five clinical case scenarios was e-mailed to all final year students at selected dental schools. Students′ responses were compared for each clinical case scenario with the prescribing guidelines of the American Academy of Pediatric Dentistry and the American Dental Association. Compliance in each scenario was tested for association with their preparedness in antibiotic prescribing, previous training on antibiotic prescribing and awareness of antibiotic prescribing guidelines using Chi-square test. Data collected were analyzed using SPSS statistics version 20. Results: A total of 108 completed responses were received. About 74 (69% students were from Malaysian dental schools. The compliance rate with prescribing guidelines ranged from 15.7% to 43.5%. Those attending Malaysian dental schools (47.3% and those who had treated child patient more often (46.3% were more likely (P < 0.05 to be aware of the guidelines. Those who had received antibiotic prescribing training (21.3% were more likely to think they were well prepared in antibiotic prescribing (P < 0.05. Conclusions: Final year dental students had low awareness and compliance with antibiotic prescribing guidelines. Further research is needed to investigate how compliance with the guidelines may be enhanced.

Case based dental radiology.

Science.gov (United States)

Niemiec, Brook A

2009-02-01

Dental radiology is quickly becoming integral to the standard of care in veterinary dentistry. This is not only because it is critical for proper patient care, but also because client expectations have increased. Furthermore, providing dental radiographs as a routine service can create significant practice income. This article details numerous conditions that are indications for dental radiographs. As you will see, dental radiographs are often critical for proper diagnosis and treatment. These conditions should not be viewed as unusual; they are present within all of our practices. When you choose not to radiograph these teeth, you leave behind painful pathology. Utilizing the knowledge gained from dental radiographs will both improve patient care and increase acceptance of treatment recommendations. Consequently, this leads to increased numbers of dental procedures performed at your practice.

Evolution of microstructure, texture and topography during additional annealing of cube-textured Ni–5at.%W substrate for coated conductors

DEFF Research Database (Denmark)

Wulff, Anders Christian; Mishin, Oleg; Grivel, Jean-Claude

2012-01-01

Microstructure, texture and topography have been studied in a recrystallized Ni–5at.%W substrate before and after additional annealing at 1025C for 1 h. The initial recrystallized material contained a strong cube texture and a high fraction of low angle grain boundaries. R3 boundaries were also f...

Differentiation of periapical granulomas and cysts by using dental MRI: a pilot study.

Science.gov (United States)

Juerchott, Alexander; Pfefferle, Thorsten; Flechtenmacher, Christa; Mente, Johannes; Bendszus, Martin; Heiland, Sabine; Hilgenfeld, Tim

2018-05-17

The purpose of this pilot study was to evaluate whether periapical granulomas can be differentiated from periapical cysts in vivo by using dental magnetic resonance imaging (MRI). Prior to apicoectomy, 11 patients with radiographically confirmed periapical lesions underwent dental MRI, including fat-saturated T2-weighted (T2wFS) images, non-contrast-enhanced T1-weighted images with and without fat saturation (T1w/T1wFS), and contrast-enhanced fat-saturated T1-weighted (T1wFS+C) images. Two independent observers performed structured image analysis of MRI datasets twice. A total of 15 diagnostic MRI criteria were evaluated, and histopathological results (6 granulomas and 5 cysts) were compared with MRI characteristics. Statistical analysis was performed using intraclass correlation coefficient (ICC), Cohen's kappa (κ), Mann-Whitney U-test and Fisher's exact test. Lesion identification and consecutive structured image analysis was possible on T2wFS and T1wFS+C MRI images. A high reproducibility was shown for MRI measurements of the maximum lesion diameter (intraobserver ICC = 0.996/0.998; interobserver ICC = 0.997), for the "peripheral rim" thickness (intraobserver ICC = 0.988/0.984; interobserver ICC = 0.970), and for all non-quantitative MRI criteria (intraobserver-κ = 0.990/0.995; interobserver-κ = 0.988). In accordance with histopathological results, six MRI criteria allowed for a clear differentiation between cysts and granulomas: (1) outer margin of lesion, (2) texture of "peripheral rim" in T1wFS+C, (3) texture of "lesion center" in T2wFS, (4) surrounding tissue involvement in T2wFS, (5) surrounding tissue involvement in T1wFS+C and (6) maximum "peripheral rim" thickness (all: P periapical cysts and granulomas in vivo. Thus, MRI may substantially improve treatment strategies and help to avoid unnecessary surgery in apical periodontitis.

Texture and superelastic behavior of cold-rolled TiNbTaZr alloy

International Nuclear Information System (INIS)

Wang Liqiang; Lu Weijie; Qin Jining; Zhang Fan; Zhang Di

2008-01-01

This work investigates the deformation texture and strain-induced α'' martensite texture of TiNbTaZr alloy during cold rolling. The alloy is rolled by 20% and 90% reductions without changing rolling direction. Textures of cold-rolled specimens are investigated by X-ray diffraction measurements. Besides {2 2 1} β β twinning texture, {1 0 0} β β texture is developed in the specimen with 20% reduction. In the 90% cold-rolled specimen, {1 0 0} β β texture appears along rolling direction and strain-induced α'' martensite texture tends to [0 1 0] and [0 0 1] directions along rolling direction (RD) and transverse direction (TD), respectively. Superelastic strain (ε SE ) exhibits higher value along RD and TD. Pure elastic strain (ε E ) shows higher value along RD and 45 deg. from RD

AUTOMATIC TEXTURE MAPPING OF ARCHITECTURAL AND ARCHAEOLOGICAL 3D MODELS

Directory of Open Access Journals (Sweden)

T. P. Kersten

2012-07-01

Full Text Available Today, detailed, complete and exact 3D models with photo-realistic textures are increasingly demanded for numerous applications in architecture and archaeology. Manual texture mapping of 3D models by digital photographs with software packages, such as Maxon Cinema 4D, Autodesk 3Ds Max or Maya, still requires a complex and time-consuming workflow. So, procedures for automatic texture mapping of 3D models are in demand. In this paper two automatic procedures are presented. The first procedure generates 3D surface models with textures by web services, while the second procedure textures already existing 3D models with the software tmapper. The program tmapper is based on the Multi Layer 3D image (ML3DImage algorithm and developed in the programming language C++. The studies showing that the visibility analysis using the ML3DImage algorithm is not sufficient to obtain acceptable results of automatic texture mapping. To overcome the visibility problem the Point Cloud Painter algorithm in combination with the Z-buffer-procedure will be applied in the future.

Automatic Texture Mapping of Architectural and Archaeological 3d Models

Science.gov (United States)

Kersten, T. P.; Stallmann, D.

2012-07-01

Today, detailed, complete and exact 3D models with photo-realistic textures are increasingly demanded for numerous applications in architecture and archaeology. Manual texture mapping of 3D models by digital photographs with software packages, such as Maxon Cinema 4D, Autodesk 3Ds Max or Maya, still requires a complex and time-consuming workflow. So, procedures for automatic texture mapping of 3D models are in demand. In this paper two automatic procedures are presented. The first procedure generates 3D surface models with textures by web services, while the second procedure textures already existing 3D models with the software tmapper. The program tmapper is based on the Multi Layer 3D image (ML3DImage) algorithm and developed in the programming language C++. The studies showing that the visibility analysis using the ML3DImage algorithm is not sufficient to obtain acceptable results of automatic texture mapping. To overcome the visibility problem the Point Cloud Painter algorithm in combination with the Z-buffer-procedure will be applied in the future.

A retrospective evaluation of traumatic dental injury in children who applied to the dental hospital, Turkey.

Science.gov (United States)

Sari, M E; Ozmen, B; Koyuturk, A E; Tokay, U; Kasap, P; Guler, D

2014-01-01

The purpose of this study was to analyze traumatic dental injuries in children visiting the dental hospital emergency department in Samsun of Turkey, in the period from 2007 to 2011. Data of age, gender, causes of dental trauma, injured teeth, type of dental injuries, the application period, the dental treatments, and traumatic dental injuries according to the seasons were obtained from the records at dental hospital. Of all 320 patients with traumatic dental injury, 205 were boys and 115 were girls with a boys/girls ratio 1.78:1. Traumatic dental injury was observed more frequently in the 7-12 age groups: 52.5% in girls and 67.8% in boys. Falls are the major cause of traumatic dental injury in the age group 6-12 (51.4%). Sport activities are a common cause of traumatic dental injury in the 7-12 age group (34.2%). Patients visited a dentist within approximately 2 h (57.1%). The upper anterior teeth were subjected to trauma more frequently than the lower anterior teeth. The maxillary central incisors were the most commonly affected teeth, and the mandibular canins were the least affected teeth. In primary teeth, avulsion was the most common type of dental injury (23%); on the other hand, enamel fractures were the most common type of dental injury (30.6%) observed in permanent teeth. In the primary dentition, the most commonly performed treatments were dental examination and prescribing (70%). The most common treatment choices in permanent teeth were restoration and dental examination (49.7 and 15.8%, respectively). The results of the study show that the emergency intervention to traumatized teeth is important for good prognosis of teeth and oral tissues. Therefore, the parents should be informed about dental trauma in schools, and dental hospital physicians should be subjected to postgraduate training.

AN ILLUMINATION INVARIANT TEXTURE BASED FACE RECOGNITION

Directory of Open Access Journals (Sweden)

K. Meena

2013-11-01

Full Text Available Automatic face recognition remains an interesting but challenging computer vision open problem. Poor illumination is considered as one of the major issue, since illumination changes cause large variation in the facial features. To resolve this, illumination normalization preprocessing techniques are employed in this paper to enhance the face recognition rate. The methods such as Histogram Equalization (HE, Gamma Intensity Correction (GIC, Normalization chain and Modified Homomorphic Filtering (MHF are used for preprocessing. Owing to great success, the texture features are commonly used for face recognition. But these features are severely affected by lighting changes. Hence texture based models Local Binary Pattern (LBP, Local Derivative Pattern (LDP, Local Texture Pattern (LTP and Local Tetra Patterns (LTrPs are experimented under different lighting conditions. In this paper, illumination invariant face recognition technique is developed based on the fusion of illumination preprocessing with local texture descriptors. The performance has been evaluated using YALE B and CMU-PIE databases containing more than 1500 images. The results demonstrate that MHF based normalization gives significant improvement in recognition rate for the face images with large illumination conditions.

Dental and Dental Hygiene Intraprofessional Education: A Pilot Program and Assessment of Students' and Patients' Satisfaction.

Science.gov (United States)

Jones, Vickie E; Karydis, Anastasios; Hottel, Timothy L

2017-10-01

Interprofessional and intraprofessional education (when students from two or more professions or within the same profession, respectively, learn about, from, and/or with each other) is crucial for effective interdisciplinary collaboration. The aims of this study were to assess the effectiveness of a clinical intraprofessional education program for dental and dental hygiene students, based on students' expectations and satisfaction with the program and patients' satisfaction with the team-based care. The pilot program was developed at the University of Tennessee Health Science Center College of Dentistry, where dental hygiene students were paired randomly with dental students scheduled for prophylaxis, scaling and root planing, or periodontal maintenance. Surveys with questions about the students' expectations and satisfaction were distributed to 89 senior dental students and 27 senior dental hygiene students before and after team-based procedures. Another survey was distributed to 17 patients asking about their satisfaction with the team-based care. All 27 dental hygiene students (100% response rate), 51 dental students (57.3% response rate), and all 17 patients (100% response rate) participated in the surveys. The results showed that both the dental and dental hygiene students had high expectations and were overall satisfied with the intraprofessional education. The students' expectations and perceived educational gap (difference between expectations and satisfaction) differed for the dental and dental hygiene students (ppatients were overwhelmingly satisfied with the team-based care. These results suggest that this intraprofessional practice model provided an effective educational experience for both dental and dental hygiene students and patients. The differences between the dental hygiene and dental students' expectations will help in the design of more effective training that promotes intraprofessional and interprofessional teamwork.

Dental hygiene students’ part-time jobs in dental practices in the Netherlands

NARCIS (Netherlands)

Poorterman, J.H.G.; Dikkes, B.T.; Brand, H.S.

2010-01-01

Objective:  Many students have paid employment while studying. In the Netherlands, the Individual Health Care Professions Act (IHCP Act) allows dental hygiene students to work under certain conditions in a dental practice. The aim of the study was to determine how many dental hygiene students have

Texturing in titanium grade 2 surface irradiate with ultrashort pulse laser

International Nuclear Information System (INIS)

Nogueira, Alessandro Francelino

2015-01-01

The texturing laser micromachining is an important alternative to improve the bonding adhesion between composites and titanium, which are applied to structural components in the aerospace industry. The texturing running on titanium plates is due to the fact that the preferred joining technique for many composite materials is the adhesive bonding. In this work, titanium plates were texturized using laser ultrashort pulses temporal widths of femtoseconds. This process resulted in minimal heat transfer to the material, avoiding deformation of the titanium plate surface as well as the formation of resolidified material in the ablated region. These drawbacks have occurred with the use of nanoseconds pulses. Were performed three types of texturing using laser with femtosecond pulses, with variations in the distances between the machined lines. The analysis of the obtained surfaces found that the wettability increases when there is the increased distance between the texturing lines. Advancing in the analysis by optical profilometry of textured surfaces was observed that there is substantial increase in the volume available for penetration of structural adhesive when the distances between the textured lines are diminished. In tensile tests conducted it was observed that there is an increase in shear strength of the adhesive joint by reducing the distance between the textured lines. (author)

The evolution of texture in aluminum alloy sheet during asymmetric rolling

International Nuclear Information System (INIS)

Kim, K-H.; Lee, D.N.

2000-01-01

Asymmetric rolling, in which the upper and lower roll radii are different, imposes shear deformation on sheets through the thickness, which in turn gives rise to shear deformation textures in the sheets through the thickness. A component of ND// in the shear deformation textures can improve the plastic strain ratios of aluminum sheets. In order to understand the evolution of ND// , the strain histories and distributions in the sheets during the asymmetric rolling are calculated by the finite element method. The strain history and distribution are used to calculate crystallographic orientations and stable orientations based on the Taylor-Bishop-Hill theory and the Renouward-Wintenberger theory. The shear deformation texture can vary with the ratio of shear to normal strain increments. As the ratio increases from zero to infinity, the texture moves from the plane strain compression texture (β fiber) to the ideal shear deformation texture consisting of {001} , {111} , and {111} . The ratio increases with rolling reduction per pass in asymmetric rolling. However, it is practically difficult to the rolling reduction per pass high enough to obtain the ideal shear deformation texture. Imposing the positive and negative shear deformations on the sheet by reversing the shearing direction can give rise to the ideal shear deformation texture. This has been discussed. (author)

Dietary specialization during the evolution of Western Eurasian hominoids and the extinction of European Great Apes.

Directory of Open Access Journals (Sweden)

Daniel DeMiguel

Full Text Available Given the central adaptive role of diet, paleodietary inference is essential for understanding the relationship between evolutionary and paleoenvironmental change. Here we rely on dental microwear analysis to investigate the role of dietary specialization in the diversification and extinction of Miocene hominoids from Western Eurasian between 14 and 7 Ma. New microwear results for five extinct taxa are analyzed together with previous data for other Western Eurasian genera. Except Pierolapithecus (that resembles hard-object feeders and Oreopithecus (a soft-frugivore probably foraging opportunistically on other foods, most of the extinct taxa lack clear extant dietary analogues. They display some degee of sclerocarpy, which is most clearly expressed in Griphopithecus and Ouranopithecus (adapted to more open and arid environments, whereas Anoiapithecus, Dryopithecus and, especially, Hispanopithecus species apparently relied more strongly on soft-frugivory. Thus, contrasting with the prevailing sclerocarpic condition at the beginning of the Eurasian hominoid radiation, soft- and mixed-frugivory coexisted with hard-object feeding in the Late Miocene. Therefore, despite a climatic trend towards cooling and increased seasonality, a progressive dietary diversification would have occurred (probably due to competitive exclusion and increased environmental heterogeneity, although strict folivory did not evolve. Overall, our analyses support the view that the same dietary specializations that enabled Western Eurasian hominoids to face progressive climatic deterioration were the main factor ultimately leading to their extinction when more drastic paleoenvironmental changes took place.

Temporal resolution of orientation-defined texture segregation: a VEP study.

Science.gov (United States)

Lachapelle, Julie; McKerral, Michelle; Jauffret, Colin; Bach, Michael

2008-09-01

Orientation is one of the visual dimensions that subserve figure-ground discrimination. A spatial gradient in orientation leads to "texture segregation", which is thought to be concurrent parallel processing across the visual field, without scanning. In the visual-evoked potential (VEP) a component can be isolated which is related to texture segregation ("tsVEP"). Our objective was to evaluate the temporal frequency dependence of the tsVEP to compare processing speed of low-level features (e.g., orientation, using the VEP, here denoted llVEP) with texture segregation because of a recent literature controversy in that regard. Visual-evoked potentials (VEPs) were recorded in seven normal adults. Oriented line segments of 0.1 degrees x 0.8 degrees at 100% contrast were presented in four different arrangements: either oriented in parallel for two homogeneous stimuli (from which were obtained the low-level VEP (llVEP)) or with a 90 degrees orientation gradient for two textured ones (from which were obtained the texture VEP). The orientation texture condition was presented at eight different temporal frequencies ranging from 7.5 to 45 Hz. Fourier analysis was used to isolate low-level components at the pattern-change frequency and texture-segregation components at half that frequency. For all subjects, there was lower high-cutoff frequency for tsVEP than for llVEPs, on average 12 Hz vs. 17 Hz (P = 0.017). The results suggest that the processing of feature gradients to extract texture segregation requires additional processing time, resulting in a lower fusion frequency.

Adult Dental Health Survey 2009: relationships between dental attendance patterns, oral health behaviour and the current barriers to dental care.

Science.gov (United States)

Hill, K B; Chadwick, B; Freeman, R; O'Sullivan, I; Murray, J J

2013-01-01

The importance of understanding barriers to dental attendance of adults in the UK was acknowledged in the first Adult Dental Health Survey in 1968 and has been investigated in all subsequent ADH surveys. In 1968, approximately 40% of dentate adults said they attended for a regular check-up; by 2009 this was 61%. Attendance patterns were associated with greater frequency of toothbrushing, use of additional dental hygiene products, lower plaque and calculus levels. Just under three-fifths of adults said they had tried to make an NHS dental appointment in the previous five years. The vast majority (92%) successfully received and attended an appointment, while a further 1% received an appointment but did not attend. The remaining 7% of adults were unable to make an appointment with an NHS dentist. The majority of adults were positive about their last visit to the dentist, with 80% of adults giving no negative feedback about their last dentist visit. Cost and anxiety were important barriers to care. Twenty-six percent of adults said the type of treatment they had opted for in the past had been affected by the cost and 19% said they had delayed dental treatment for the same reason. The 2009 survey data demonstrated a relationship between dental anxiety and dental attendance. Adults with extreme dental anxiety were more likely to attend only when they had trouble with their teeth (22%) than for a regular check-up.

The role of textures in the forming of automotive sheet steels

International Nuclear Information System (INIS)

Sanak Mishra

1996-01-01

Crystallographic textures generally have a strong bearing on the drawability of sheet steels. Particularly in the case of automotive sheets, texture control is of paramount importance. In the last two decades, therefore, texture research has assumed much significance in the steel industry. X-ray diffraction continues to remain the most used tool for the study of textures. Early researches, from about 1940 to 1980, were invariably carried out by the pole figure method. However, for more quantitative results the ODF (Orientation Distribution Functions) analysis technique was developed. Since 1980, the ODF analysis has come to be used extensively. In the present paper, several unique features of textures in automotive grade deep drawing steels, as revealed from X-ray ODFS, will be presented. The relative importance of the various textural components with respect to forming will also be dealt with

A psychophysically validated metric for bidirectional texture data reduction

Czech Academy of Sciences Publication Activity Database

Filip, Jiří; Chantler, M.J.; Green, P.R.; Haindl, Michal

2008-01-01

Roč. 27, č. 5 (2008), s. 138:1-138:11 ISSN 0730-0301 R&D Projects: GA AV ČR 1ET400750407; GA ČR GA102/08/0593 Institutional research plan: CEZ:AV0Z10750506 Keywords : Bidirectional Texture Functions * texture compression Subject RIV: BD - Theory of Information Impact factor: 3.383, year: 2008 http://library.utia.cas.cz/separaty/2008/RO/haindl-a psychophysically validated metric for bidirectional texture data reduction.pdf

Panoramic Dental X-Ray

Science.gov (United States)

... Physician Resources Professions Site Index A-Z Panoramic Dental X-ray Panoramic dental x-ray uses a very small dose of ... x-ray , is a two-dimensional (2-D) dental x-ray examination that captures the entire mouth ...

Advancing education in dental hygiene.

Science.gov (United States)

Battrell, Ann; Lynch, Ann; Steinbach, Pam; Bessner, Sue; Snyder, Josh; Majeski, Jean

2014-06-01

The changing health care environment and societal imperatives indicate the need for transformative change within the dental hygiene profession to serve the emerging needs of the public. The American Dental Hygienists' Association is leading the way toward meaningful change. The American Dental Hygienists' Association (ADHA) has as its vision the integration of dental hygienists into the health care delivery system as essential primary care providers to expand access to oral health care. This article provides data on current dental hygiene education programs and those in development. Also included is a discussion regarding how the dental hygiene profession can better serve the health and wellness needs of society by transforming the way graduates are prepared for the future. ADHA's dental hygiene survey center data, policies and a futuristic analysis plus a review of the professional literature describe the current state of dental hygiene education and the profession. A discussion of societal, health care and educational trends that creates the imperative for transformation of the dental hygiene profession is provided. Ultimately, the purpose of advancing education in dental hygiene is to achieve better oral and overall health for more people. The profession's responsibility to the public includes evaluating its own ability to provide care and taking the steps necessary to ensure its maximum effectiveness. ADHA is leading this process for dental hygienists in diverse ways. It is imperative that the dental hygiene profession understands and embraces the changing health care environment. Through open dialog and the sharing of evidence the professional path will be determined along with forward movement for the benefit of society and the dental hygiene profession. Copyright © 2014 Elsevier Inc. All rights reserved.

Texture analysis of Napoleonic War Era copper bolts

Science.gov (United States)

Malamud, Florencia; Northover, Shirley; James, Jon; Northover, Peter; Kelleher, Joe

2016-04-01

Neutron diffraction techniques are suitable for volume texture analyses due to high penetration of thermal neutrons in most materials. We have implemented a new data analysis methodology that employed the spatial resolution achievable by a time-of-flight neutron strain scanner to non-destructively determine the crystallographic texture at selected locations within a macroscopic sample. The method is based on defining the orientation distribution function of the crystallites from several incomplete pole figures, and it has been implemented on ENGIN-X, a neutron strain scanner at the Isis Facility in the UK. Here, we demonstrate the application of this new texture analysis methodology in determining the crystallographic texture at selected locations within museum quality archaeological objects up to 1 m in length. The results were verified using samples of similar, but less valuable, objects by comparing the results of applying this method with those obtained using both electron backscatter diffraction and X-ray diffraction on their cross sections.

Alaska Dental Health Aide Program.

Science.gov (United States)

Shoffstall-Cone, Sarah; Williard, Mary

2013-01-01

In 1999, An Oral Health Survey of American Indian and Alaska Native (AI/AN) Dental Patients found that 79% of 2- to 5-year-olds had a history of tooth decay. The Alaska Native Tribal Health Consortium in collaboration with Alaska's Tribal Health Organizations (THO) developed a new and diverse dental workforce model to address AI/AN oral health disparities. This paper describes the workforce model and some experience to date of the Dental Health Aide (DHA) Initiative that was introduced under the federally sanctioned Community Health Aide Program in Alaska. These new dental team members work with THO dentists and hygienists to provide education, prevention and basic restorative services in a culturally appropriate manner. The DHA Initiative introduced 4 new dental provider types to Alaska: the Primary Dental Health Aide, the Expanded Function Dental Health Aide, the Dental Health Aide Hygienist and the Dental Health Aide Therapist. The scope of practice between the 4 different DHA providers varies vastly along with the required training and education requirements. DHAs are certified, not licensed, providers. Recertification occurs every 2 years and requires the completion of 24 hours of continuing education and continual competency evaluation. Dental Health Aides provide evidence-based prevention programs and dental care that improve access to oral health care and help address well-documented oral health disparities.

Alaska Dental Health Aide Program

Directory of Open Access Journals (Sweden)

Sarah Shoffstall-Cone

2013-08-01

Full Text Available Background. In 1999, An Oral Health Survey of American Indian and Alaska Native (AI/AN Dental Patients found that 79% of 2- to 5-year-olds had a history of tooth decay. The Alaska Native Tribal Health Consortium in collaboration with Alaska’s Tribal Health Organizations (THO developed a new and diverse dental workforce model to address AI/AN oral health disparities. Objectives. This paper describes the workforce model and some experience to date of the Dental Health Aide (DHA Initiative that was introduced under the federally sanctioned Community Health Aide Program in Alaska. These new dental team members work with THO dentists and hygienists to provide education, prevention and basic restorative services in a culturally appropriate manner. Results. The DHA Initiative introduced 4 new dental provider types to Alaska: the Primary Dental Health Aide, the Expanded Function Dental Health Aide, the Dental Health Aide Hygienist and the Dental Health Aide Therapist. The scope of practice between the 4 different DHA providers varies vastly along with the required training and education requirements. DHAs are certified, not licensed, providers. Recertification occurs every 2 years and requires the completion of 24 hours of continuing education and continual competency evaluation. Conclusions. Dental Health Aides provide evidence-based prevention programs and dental care that improve access to oral health care and help address well-documented oral health disparities.

Friction reduction using discrete surface textures: principle and design

International Nuclear Information System (INIS)

Hsu, Stephen M; Jing, Yang; Hua, Diann; Zhang, Huan

2014-01-01

There have been many reports on the use of dimples, grooves, and other surface textures to control friction in sliding interfaces. The effectiveness of surface textures in friction reduction has been demonstrated in conformal contacts under high speed low load applications such as mechanical seals and automotive water pump seals, etc., resulting in reduced friction and longer durability. For sliding components with higher contact pressures or lower speeds, conflicting results were reported. Reasons for the inconsistency may be due to the differences in texture fabrication techniques, lack of dimple size and shape uniformity, and different tester used. This paper examines the basic principles on which surface textural patterns influence friction under the three principle lubrication regimes: hydrodynamic, elastohydrodynamic, and boundary lubrication regimes. Our findings suggest that each regime requires specific dimple size, shape, depth, and areal density to achieve friction reduction. Control experiments were also conducted to explore mechanisms of friction reduction. The dimple geometric shape and the dimple's orientation with respect to the sliding direction influence friction significantly. The underlying mechanisms for friction control via textures are discussed. (paper)

The structure of surface texture knowledge

International Nuclear Information System (INIS)

Yan Wang; Scott, Paul J; Jiang Xiangqian

2005-01-01

This research aims to create an intelligent knowledge-based system for engineering and bio-medical engineering surface texture, which will provide expert knowledge of surface texture to link surface function, specification of micro- and nano-geometry through manufacture, and verification. The intelligent knowledge base should be capable of incorporating knowledge from multiple sources (standards, books, experts, etc), adding new knowledge from these sources and still remain a coherent reliable system. A new data model based on category theory will be adopted to construct this system

Children's experiences of dental anxiety.

Science.gov (United States)

Morgan, Annie G; Rodd, Helen D; Porritt, Jenny M; Baker, Sarah R; Creswell, Cathy; Newton, Tim; Williams, Chris; Marshman, Zoe

2017-03-01

Dental anxiety is common among children. Although there is a wealth of research investigating childhood dental anxiety, little consideration has been given to the child's perspective. This qualitative study sought to explore with children their own experiences of dental anxiety using a cognitive behavioural therapy assessment model. Face-to-face, semi-structured interviews were conducted with dentally anxious children aged 11-16 years. The Five Areas model was used to inform the topic guide and analysis. Data were analysed using a framework approach. In total, 13 children were interviewed. Participants described their experiences of dental anxiety across multiple dimensions (situational factors and altered thoughts, feelings, physical symptoms, and behaviours). Participants placed considerable value on communication by dental professionals, with poor communication having a negative influence on dental anxiety and the dentist-patient relationship. This study confirms the Five Areas model as an applicable theoretical model for the assessment of childhood dental anxiety. Children provided insights about their own dental anxiety experiences that have not previously been described. © 2016 BSPD, IAPD and John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Plasma-nitriding assisted micro-texturing into stainless steel molds

Directory of Open Access Journals (Sweden)

Aizawa Tatsuhiko

2015-01-01

Full Text Available Micro-texturing has grown up to be one of the most promising procedures. This related application required for large-area, fine micro-texturing onto the stainless steel mold materials. A new method other than laser-machining, micro-milling or micro-EDM was awaited for further advancement of this micro-texturing. In the present paper, a plasma nitriding assisted micro-texturing was developed to make various kinds of micro-patterns onto the martensitic stainless steels. First, original patterns were printed onto the surface of substrate by using the ink-jet printer. Then, the masked substrate was subjected to high density plasma nitriding; the un-masked surfaces were nitrided to have higher hardness. This nitrided substrate was further treated by sand-blasting to selectively dig the soft, masked surfaces. Finally, the micro-patterned martensitic stainless steel substrate was fabricated as a mold to duplicate these micro-patterns onto the work materials. The spatial resolution and depth profile controllability of this plasma nitriding assisted micro-texturing was investigated for variety of initial micro-patterns. The original size and dimension of initial micro-patterns were precisely compared with the three dimensional geometry of micro-textures after blasting treatment. The plastic cover case for smart cellular phones was employed to demonstrate how useful this processing is in practice.

Effect of texturing on polarization switching dynamics in ferroelectric ceramics

Science.gov (United States)

Zhukov, Sergey; Genenko, Yuri A.; Koruza, Jurij; Schultheiß, Jan; von Seggern, Heinz; Sakamoto, Wataru; Ichikawa, Hiroki; Murata, Tatsuro; Hayashi, Koichiro; Yogo, Toshinobu

2016-01-01

Highly (100),(001)-oriented (Ba0.85Ca0.15)TiO3 (BCT) lead-free piezoelectric ceramics were fabricated by the reactive templated grain growth method using a mixture of plate-like CaTiO3 and BaTiO3 particles. Piezoelectric properties of the ceramics with a high degree of texture were found to be considerably enhanced compared with the BCT ceramics with a low degree of texture. With increasing the Lotgering factor from 26% up to 94%, the piezoelectric properties develop towards the properties of a single crystal. The dynamics of polarization switching was studied over a broad time domain of 8 orders of magnitude and was found to strongly depend on the degree of orientation of the ceramics. Samples with a high degree of texture exhibited 2-3 orders of magnitude faster polarization switching, as compared with the ones with a low degree of texture. This was rationalized by means of the Inhomogeneous Field Mechanism model as a result of the narrower statistical distribution of the local electric field values in textured media, which promotes a more coherent switching process. The extracted microscopic parameters of switching revealed a decrease of the critical nucleus energy in systems with a high degree of texture providing more favorable switching conditions related to the enhanced ferroelectric properties of the textured material.

Assessment Of Mold-Design Dependent Textures In CIM-Components By Polarized Light Optical Texture Analysis (PLOTA)

International Nuclear Information System (INIS)

Kern, Frank; Rauch, Johannes; Gadow, Rainer

2007-01-01

By thermoplastic ceramic injection moulding (CIM) ceramic components of high complexity can be produced in a large number of items at low dimensional tolerances. The cost advantage by the high degree of automation leads to an economical mass-production. The structure of injection-moulded components is determined by the form filling behaviour and viscosity of the feedstock, the machine parameters, the design of the mold and the gate design. With an adapted mold- and gate-design CIM-components without textures are possible. The ''Polarized Light Optical Texture analysis'' (PLOTA) makes it possible to inspect the components and detect and quantify the textures produced by a new mold. Based on the work of R. Fischer (2004) the PLOTA procedure was improved by including the possibility to measure the inclination angle and thus describe the orientation of the grains in three dimensions. Sampled thin sections of ceramic components are analysed under the polarization microscope and are brought in diagonal position. Pictures are taken with a digital camera. The pictures are converted in the L*a*b*- colour space and the crystals color values a* and b* in the picture are measured. The color values are compared with the values of a quartz wedge, which serves as universal standard. From the received values the inclination angle can be calculated relative to the microscope axis. It is possible to use the received data quantitatively e.g. for the FEM supported simulation of texture-conditioned divergences of mechanical values. Thus the injection molding parameters can be optimized to obtain improved mechanical properties

Visual perception of procedural textures: identifying perceptual dimensions and predicting generation models.

Science.gov (United States)

Liu, Jun; Dong, Junyu; Cai, Xiaoxu; Qi, Lin; Chantler, Mike

2015-01-01

Procedural models are widely used in computer graphics for generating realistic, natural-looking textures. However, these mathematical models are not perceptually meaningful, whereas the users, such as artists and designers, would prefer to make descriptions using intuitive and perceptual characteristics like "repetitive," "directional," "structured," and so on. To make up for this gap, we investigated the perceptual dimensions of textures generated by a collection of procedural models. Two psychophysical experiments were conducted: free-grouping and rating. We applied Hierarchical Cluster Analysis (HCA) and Singular Value Decomposition (SVD) to discover the perceptual features used by the observers in grouping similar textures. The results suggested that existing dimensions in literature cannot accommodate random textures. We therefore utilized isometric feature mapping (Isomap) to establish a three-dimensional perceptual texture space which better explains the features used by humans in texture similarity judgment. Finally, we proposed computational models to map perceptual features to the perceptual texture space, which can suggest a procedural model to produce textures according to user-defined perceptual scales.

Visual perception of procedural textures: identifying perceptual dimensions and predicting generation models.

Directory of Open Access Journals (Sweden)

Jun Liu

Full Text Available Procedural models are widely used in computer graphics for generating realistic, natural-looking textures. However, these mathematical models are not perceptually meaningful, whereas the users, such as artists and designers, would prefer to make descriptions using intuitive and perceptual characteristics like "repetitive," "directional," "structured," and so on. To make up for this gap, we investigated the perceptual dimensions of textures generated by a collection of procedural models. Two psychophysical experiments were conducted: free-grouping and rating. We applied Hierarchical Cluster Analysis (HCA and Singular Value Decomposition (SVD to discover the perceptual features used by the observers in grouping similar textures. The results suggested that existing dimensions in literature cannot accommodate random textures. We therefore utilized isometric feature mapping (Isomap to establish a three-dimensional perceptual texture space which better explains the features used by humans in texture similarity judgment. Finally, we proposed computational models to map perceptual features to the perceptual texture space, which can suggest a procedural model to produce textures according to user-defined perceptual scales.

Dental school finances: current status.

Science.gov (United States)

Crawford, W H

1986-05-01

Total expenditures and revenues of 58 US dental school were derived from reports of the ADA Division of Educational Measurements. These financial data were studied by type of dental school (public, state-related private, and private) and by expenditure/revenue categories. Dental schools showed little diversity in expenditures: most were directed toward instruction; few were directed toward research or continuing education. Several distinctive patterns among the three types of dental schools in revenues were observed. Two configurations emerged: public and state-related private dental schools receive more than 75% of their revenues from government and tuition, and private dental schools, more than 50%.

Functionality of extrusion--texturized whey proteins.

Science.gov (United States)

Onwulata, C I; Konstance, R P; Cooke, P H; Farrell, H M

2003-11-01

Whey, a byproduct of the cheesemaking process, is concentrated by processors to make whey protein concentrates (WPC) and isolates (WPI). Only 50% of whey proteins are used in foods. In order to increase their usage, texturizing WPC, WPI, and whey albumin is proposed to create ingredients with new functionality. Extrusion processing texturizes globular proteins by shearing and stretching them into aligned or entangled fibrous bundles. In this study, WPC, WPI, and whey albumin were extruded in a twin screw extruder at approximately 38% moisture content (15.2 ml/min, feed rate 25 g/min) and, at different extrusion cook temperatures, at the same temperature for the last four zones before the die (35, 50, 75, and 100 degrees C, respectively). Protein solubility, gelation, foaming, and digestibility were determined in extrudates. Degree of extrusion-induced insolubility (denaturation) or texturization, determined by lack of solubility at pH 7 for WPI, increased from 30 to 60, 85, and 95% for the four temperature conditions 35, 50, 75, and 100 degrees C, respectively. Gel strength of extruded isolates increased initially 115% (35 degrees C) and 145% (50 degrees C), but gel strength was lost at 75 and 100 degrees C. Denaturation at these melt temperatures had minimal effect on foaming and digestibility. Varying extrusion cook temperature allowed a new controlled rate of denaturation, indicating that a texturized ingredient with a predetermined functionality based on degree of denaturation can be created.

Textural states of a hot-worked MA2-1 magnesium alloy

Science.gov (United States)

Serebryany, V. N.; Kochubei, A. Ya.; Kurtasov, S. F.; Mel'Nikov, K. E.

2007-02-01

Quantitative texture analysis is used to study texture formation in an MA2-1 magnesium alloy subjected to axisymmetric upsetting at temperatures of 250-450°C and strain rates of 10-4-100 -1. The deformed structure is examined by optical microscopy, and the results obtained are used to plot the structural-state diagram of the alloy after 50% upsetting. The experimental textures are compared with the textures calculated in terms of a thermoactivation model.

Quantitative analysis of textures produced in a hot-extruded zirconium plate

International Nuclear Information System (INIS)

Couterne, J.

1967-01-01

The textures produced in zirconium by the extrusion at 730 deg C of a cylindrical billet in the form of a plate having a rectangular cross-section, have been studied by the Schulz method using an isotropic standard. These textures have been determined both parallel to the plane of the plate and parallel to the plane of the sides, All the results are analyzed in a final discussion which makes it possible to show, in particular near the edges of the plate, that certain components of the textures observed in the two series of recordings are in fact aspects of the same texture seen from two different angles, It is shown furthermore that the zirconium thus shaped has cold-work textures and als recrystallisation textures formed after the preceding cold-working, If the observed textures are considered schematically, it can be see that two of these have already been described in the literature and are similar to those found in rolled products: these textures are such that the (0001) planes are inclined at 36 deg C and 60 deg C respectively with respect to a plan tangential to the curve (envelope of transverse flow rates) resulting from the extrusion geometry under consideration; the third texture is defined. by the fact that the (0001) plane is orthogonal to the exterior surfaces of the plate. The direction of extrusion associated with these planes and common to the three textures is of the type , Dilatometric tests have been carried out on samples taken both parallel and perpendicular to the extrusion direction, These tests show that the zirconium is dilatometrically anisotropic and that a plot of (α v )-a against temperature shows a change of gradient at 400 deg C, this latter effect may be due to the change in the electronic configuration of the metal occurring at this temperature. (author) [fr

Statistical Texture Model for mass Detection in Mammography

Directory of Open Access Journals (Sweden)

Nicolás Gallego-Ortiz

2013-12-01

Full Text Available In the context of image processing algorithms for mass detection in mammography, texture is a key feature to be used to distinguish abnormal tissue from normal tissue. Recently, a texture model based on a multivariate Gaussian mixture was proposed, of which the parameters are learned in an unsupervised way from the pixel intensities of images. The model produces images that are probabilistic maps of texture normality and it was proposed as a visualization aid for diagnostic by clinical experts. In this paper, the usability of the model is studied for automatic mass detection. A segmentation strategy is proposed and evaluated using 79 mammography cases.

Second order statistical analysis of US image texture

International Nuclear Information System (INIS)

Tanzi, F.; Novario, R.

1999-01-01

The study reports the sonographic image texture of the neonatal heart in different stages of development by calculating numerical parameters extracted from the gray scale co-occurrence matrix. To show pixel values differences and enhance texture structure, images were equalized and then the gray level range was reduced to 16 to allow sufficiently high occupancy frequency of the co-occurrence matrix. Differences are so little significant that they may be due to different factors affecting image texture and the variability introduced by manual ROI positioning; therefore no definitive conclusions can be drawn as to considering this kind of analysis capable of discriminating different stages of myocardial development [it

DNS of flows over superhydrophobic surfaces with small texture

Science.gov (United States)

Fairhall, Chris; Garcia-Mayoral, Ricardo

2015-11-01

We present results from direct numerical simulations of turbulent flows over superhydrophobic surfaces with small texture sizes, comparable to those of practical application. Textures studied with DNS are usually much larger, as the cost of the simulations would otherwise be prohibitive. For this reason, a multi-block code that allows for finer resolution near the walls has been developed. We focus particularly on the pressure distribution at the wall. This distribution can cause the deformation of the gas pockets, which can ultimately lead to their loss and that of the drag reduction effect. The layout of the texture causes stagnation pressures which can contribute substantially to the wall pressure signal (Seo et al. JFM, under review). We study a range of different textures and their influence on these pressures.

Topotactic preparation of textured alumina ceramics from dehydroxylation of gibbsite films

Energy Technology Data Exchange (ETDEWEB)

Louaer, Seif-Eddine; Wang, Yao, E-mail: yao@buaa.edu.cn; Guo, Lin, E-mail: guolin@buaa.edu.cn

2014-11-14

In this paper, textured alumina ceramics were prepared from dehydroxylation of gibbsite films and the pseudomorphic and topotactic nature of the dehydroxylation of textured gibbsite films has been investigated. First, the precursor film with a (001)-textured structure was obtained via vacuum filtration deposition of diluted aqueous suspensions of gibbsite nanoplatelets. Subsequently, (001)-textured α-alumina ceramics were successfully achieved by sintering of the deposited gibbsite films without addition of α-alumina seeds. The Scanning Electron Microscope (SEM) and X-ray Diffraction (XRD) results show that, during the phase transition from gibbsite to α-alumina, both layered morphology and crystal's axis orientation have been retained to a considerable extent. For the first time, a direct XRD evidence of gibbsite topotactic dehydroxylation to the α-alumina phase is presented. It is believed that the method described here exploits gibbsite's pseudomorphic and topotactic dehydroxylation, not on individual particles scale but on a bulk form. The resulting structure can be considered as inorganic scaffolds which can have applications for fabrication of dense, textured alumina-based ceramics and other layered/textured nanocomposites. - Highlights: • Gibbsite nanoplatelets were assembled on their basal plane to form (001)-textured films. • Textured alumina ceramics were prepared by sintering textured gibbsite films without addition of α-alumina seeds. • Both pseudomorphic and topotactic aspects were exploited in bulk form instead of individual nanoparticulate size. • Direct XRD evidence of the topotactic dehydroxylation from gibbsite to α-alumina is presented in this work.

Topotactic preparation of textured alumina ceramics from dehydroxylation of gibbsite films

International Nuclear Information System (INIS)

Louaer, Seif-Eddine; Wang, Yao; Guo, Lin

2014-01-01

In this paper, textured alumina ceramics were prepared from dehydroxylation of gibbsite films and the pseudomorphic and topotactic nature of the dehydroxylation of textured gibbsite films has been investigated. First, the precursor film with a (001)-textured structure was obtained via vacuum filtration deposition of diluted aqueous suspensions of gibbsite nanoplatelets. Subsequently, (001)-textured α-alumina ceramics were successfully achieved by sintering of the deposited gibbsite films without addition of α-alumina seeds. The Scanning Electron Microscope (SEM) and X-ray Diffraction (XRD) results show that, during the phase transition from gibbsite to α-alumina, both layered morphology and crystal's axis orientation have been retained to a considerable extent. For the first time, a direct XRD evidence of gibbsite topotactic dehydroxylation to the α-alumina phase is presented. It is believed that the method described here exploits gibbsite's pseudomorphic and topotactic dehydroxylation, not on individual particles scale but on a bulk form. The resulting structure can be considered as inorganic scaffolds which can have applications for fabrication of dense, textured alumina-based ceramics and other layered/textured nanocomposites. - Highlights: • Gibbsite nanoplatelets were assembled on their basal plane to form (001)-textured films. • Textured alumina ceramics were prepared by sintering textured gibbsite films without addition of α-alumina seeds. • Both pseudomorphic and topotactic aspects were exploited in bulk form instead of individual nanoparticulate size. • Direct XRD evidence of the topotactic dehydroxylation from gibbsite to α-alumina is presented in this work

Friction behavior of nano-textured polyimide surfaces measured by AFM colloidal probe

Energy Technology Data Exchange (ETDEWEB)

Zhang, Xiaoliang [College of Equipment Manufacturing, Hebei University of Engineering, Handan 056038 (China); State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000 (China); Wu, Chunxia; Che, Hongwei; Hou, Junxian [College of Equipment Manufacturing, Hebei University of Engineering, Handan 056038 (China); Jia, Junhong, E-mail: jhjia@licp.cas.cn [State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000 (China)

2014-11-30

Highlights: • Flat PI film and nano-textured PI film were prepared by spin-coating process. • The nano-textured PI surface has effectively reduced the adhesion and friction. • Friction increased with the increasing of contact area and adhesion. • The growth rate of friction decreased with the increasing of applied load. - Abstract: Flat polyimide (PI) film and silicon dioxide nanoparticle-textured PI film were prepared by means of the spin-coating technique. The adhesion and friction properties of the flat PI surface and nano-textured PI surface were investigated by a series of Atomic force microscope (AFM) colloidal probes. Experimental results revealed that the nano-textured PI surface can significantly reduce the adhesive force and friction force, compared with the flat PI surface. The main reason is that the nano-textures can reduce the contact area between the sample surface and colloidal probe. The effect of colloidal probe size on the friction behavior of the flat and nano-textured PI surfaces was evaluated. The adhesive force and friction force of nano-textured PI surface were increased with the increasing of the size of interacting pairs (AFM colloidal probe) due to the increased contact area. Moreover, the friction forces of flat and nano-textured PI surfaces were increased with applied load and sliding velocity.

Calculus detection calibration among dental hygiene faculty members utilizing dental endoscopy: a pilot study.

Science.gov (United States)

Partido, Brian B; Jones, Archie A; English, Dana L; Nguyen, Carol A; Jacks, Mary E

2015-02-01

Dental and dental hygiene faculty members often do not provide consistent instruction in the clinical environment, especially in tasks requiring clinical judgment. From previous efforts to calibrate faculty members in calculus detection using typodonts, researchers have suggested using human subjects and emerging technology to improve consistency in clinical instruction. The purpose of this pilot study was to determine if a dental endoscopy-assisted training program would improve intra- and interrater reliability of dental hygiene faculty members in calculus detection. Training included an ODU 11/12 explorer, typodonts, and dental endoscopy. A convenience sample of six participants was recruited from the dental hygiene faculty at a California community college, and a two-group randomized experimental design was utilized. Intra- and interrater reliability was measured before and after calibration training. Pretest and posttest Kappa averages of all participants were compared using repeated measures (split-plot) ANOVA to determine the effectiveness of the calibration training on intra- and interrater reliability. The results showed that both kinds of reliability significantly improved for all participants and the training group improved significantly in interrater reliability from pretest to posttest. Calibration training was beneficial to these dental hygiene faculty members, especially those beginning with less than full agreement. This study suggests that calculus detection calibration training utilizing dental endoscopy can effectively improve interrater reliability of dental and dental hygiene clinical educators. Future studies should include human subjects, involve more participants at multiple locations, and determine whether improved rater reliability can be sustained over time.

A Noise Robust Statistical Texture Model

DEFF Research Database (Denmark)

Hilger, Klaus Baggesen; Stegmann, Mikkel Bille; Larsen, Rasmus

2002-01-01

Appearance Models segmentation framework. This is accomplished by augmenting the model with an estimate of the covariance of the noise present in the training data. This results in a more compact model maximising the signal-to-noise ratio, thus favouring subspaces rich on signal, but low on noise......This paper presents a novel approach to the problem of obtaining a low dimensional representation of texture (pixel intensity) variation present in a training set after alignment using a Generalised Procrustes analysis.We extend the conventional analysis of training textures in the Active...

First steps towards cube textured nickel profile wires for YBCO-coated conductors

International Nuclear Information System (INIS)

Eickemeyer, J.; Gueth, A.; Freudenberger, J.; Holzapfel, B.; Schultz, L.

2011-01-01

The cube texture as a typical sheet texture can also be formed by cold drawing and recrystallization in profile wires. Cube textured Ni profile wires containing up to 96.2% cube oriented grains in the central region were obtained. Forthcoming investigations are promising to get a textured substrate wire for YBCO-coated conductors. Cube textured nickel alloy tapes prepared by cold rolling and annealing (RABiTS method) represent a standard metallic substrate for superconductor coatings of the YBa 2 Cu 3 O 7-δ (YBCO) type. These tapes have a width to thickness ratio of about 30-100. However, a value of close to one is optimal concerning low energetic losses under alternating current applications. First experiments on micro-alloyed nickel prove that the cube texture as a typical sheet texture can also be formed in profile wires with a rectangular cross-section after cold drawing and recrystallization treatment.

Self-Similarity Based Corresponding-Point Extraction from Weakly Textured Stereo Pairs

Directory of Open Access Journals (Sweden)

Min Mao

2014-01-01

Full Text Available For the areas of low textured in image pairs, there is nearly no point that can be detected by traditional methods. The information in these areas will not be extracted by classical interest-point detectors. In this paper, a novel weakly textured point detection method is presented. The points with weakly textured characteristic are detected by the symmetry concept. The proposed approach considers the gray variability of the weakly textured local regions. The detection mechanism can be separated into three steps: region-similarity computation, candidate point searching, and refinement of weakly textured point set. The mechanism of radius scale selection and texture strength conception are used in the second step and the third step, respectively. The matching algorithm based on sparse representation (SRM is used for matching the detected points in different images. The results obtained on image sets with different objects show high robustness of the method to background and intraclass variations as well as to different photometric and geometric transformations; the points detected by this method are also the complement of points detected by classical detectors from the literature. And we also verify the efficacy of SRM by comparing with classical algorithms under the occlusion and corruption situations for matching the weakly textured points. Experiments demonstrate the effectiveness of the proposed weakly textured point detection algorithm.

Texture and inflation in a closed universe

International Nuclear Information System (INIS)

Hacyan, S.; Sarmiento, A.

1993-01-01

We present a cosmological model with a global homogeneous texture and inflation, but without an initial singularity. The Universe starts from an equilibrium configuration in a symmetric vacuum; the dynamic stability of this configuration is studied. We obtain numerical solutions which show that the Universe expands exponentially and the texture field decays in a finite time; this corresponds to a period of inflation followed naturally by a Friedmann expansion

Dental care coverage and income-related inequalities in foregone dental care in Europe during the great recession.

Science.gov (United States)

Elstad, Jon Ivar

2017-08-01

This study examines income inequalities in foregone dental care in 23 European countries during the years with global economic crisis. Associations between dental care coverage from public health budgets or social insurance, and income-related inequalities in perceived access to dental care, are analysed. Survey data 2008-2013 from 23 countries were combined with country data on macro-economic conditions and coverage for dental care. Foregone dental care was defined as self-reported abstentions from needed dental care because of costs or other crisis-related reasons. Age-standardized percentages reporting foregone dental care were estimated for respondents, age 20-74, in the lowest and highest income quartile. Associations between dental care coverage and income inequalities in foregone dental care, adjusted for macro-economic indicators, were examined by country-level regression models. In all 23 countries, respondents in the lowest income quartile reported significantly higher levels of foregone dental care than respondents in the highest quartile. During 2008-2013, income inequalities in foregone dental care widened significantly in 13 of 23 countries, but decreased in only three countries. Adjusted for countries' macro-economic situation and severity of the economic crisis, higher dental care coverage was significantly associated with smaller income inequalities in foregone dental care and less widening of these inequalities. Income-related inequalities in dental care have widened in Europe during the years with global economic crisis. Higher dental care coverage corresponded to less income-related inequalities in foregone dental care and less widening of these inequalities. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Perception and understanding of dental practitioners in provision of dental treatment to pregnant women in Karachi, Pakistan

Directory of Open Access Journals (Sweden)

Aisha Wali

2016-01-01

Full Text Available Aim: The aim of the study was to that assess the perceptions and understanding of dental practitioners in the provision of dental treatment to pregnant women. Materials and Methods: The study was a quantitative, cross-sectional type. A sample size of 200 dental practitioners were included in the study between the period of 6 months, i.e. June–December. A cluster sampling technique was employed covering four different dental institutes. A structured questionnaire was designed to assess the perception and understanding of dental practitioners in providing treatment to the pregnant women. Statistical Analysis: Statistical analysis was performed using SPSS version 19. Chi-square test was done to analyze the association of perception of dental practitioners in treating pregnant women in relation to gender. Results: A total of 200 dental practitioners filled the questionnaire out of which 43% (86 were males and 57% (114 were females. Eighty-two percent of the total participants said that it is safe to provide dental treatment during pregnancy, almost 90.4% of the total dentist interviewed was aware of the special position in which to place a pregnant woman on a dental chair. 85.5% of the study population do not prefer taking radiographs of a pregnant woman, 63% of the entire dentist surveyed prefers to use local anesthesia before any dental procedure on a pregnant patient. 96.5% care to educate their pregnant patient about improving dental health care. 59.5% of the dental practitioners said that they would consult the patient's gynecologist as a mandatory requirement before treating the patient. 57% of the dental practitioners answered with gingivitis. 70.5% agreed on scaling. The majority of the dentists prescribed paracetamol 85.5%. Conclusion: Little is known about the perception and utilization of dental practitioners in providing dental treatment to pregnant women in Pakistan. The present survey concluded that dental practitioners lack

Stress Among Dental Students

NARCIS (Netherlands)

A.M. Alzahem (Abdullah)

2015-01-01

markdownabstractAbstract Dental students are facing many stressors in dental education, causing many negative outcomes. The most common are the exams and the clinical requirements. We suggest exposing the dental students to patient care as early as possible in their curriculum. This can help to

Is liberal independent dental practice in danger? Assessing forms of dental practice in the European Regional Organization (ERO) zone of the FDI World Dental Federation.

Science.gov (United States)

Wolf, Thomas Gerhard; Seeberger, Gerhard Konrad; Callaway, Angelika; Briseño-Marroquín, Benjamín; Rusca, Philippe; Frank, Michael; Otterbach, Ernst-Jürgen

2018-02-26

A trend towards increasingly new forms of dental practice has been observed in the FDI World Dental Federation. Elementary foundations such as the free dentist and therapy choice, and independent, free, self-responsible professional practice may be undermined. The current study is aimed at analyzing the general training framework, organization, and professional types of dental practice in the European Regional Organization (ERO) zone and at critically discussing selected aspects of changes in the dental profession. A questionnaire was developed by the ERO Working-Group "Liberal Dental Practice." Information about dental schools, professional organizations, dental practice regulations, and ambulatory healthcare centers was analyzed. Self-employed dental practice is the most common type of practice (51.7%). Dentists are allowed to work independently immediately after graduation (72.7%). Approximately one-third are organized as compulsory members in chambers/corporations. The density of dentists has a mean of 1,570 inhabitants per dentist. In most countries, there are no special rules for founding dental ambulatory healthcare centers. In a total of 353 universities of the ERO countries surveyed, 16,619 dentists per year were trained, with a trend toward a higher percentage of female students (63%). Despite modern forms of dental practice, the charter of the individual liberal dental profession (CED et al, 2013) should be respected and taken into account on the basis of ethical principles. The commercialization of the dental profession can be neutralized only by establishing and following well-defined ethical principles; oral healthcare quality can thus be ensured without the influence of third parties.

Two-dimensional numerical simulation of boron diffusion for pyramidally textured silicon

International Nuclear Information System (INIS)

Ma, Fa-Jun; Duttagupta, Shubham; Shetty, Kishan Devappa; Meng, Lei; Hoex, Bram; Peters, Ian Marius; Samudra, Ganesh S.

2014-01-01

Multidimensional numerical simulation of boron diffusion is of great relevance for the improvement of industrial n-type crystalline silicon wafer solar cells. However, surface passivation of boron diffused area is typically studied in one dimension on planar lifetime samples. This approach neglects the effects of the solar cell pyramidal texture on the boron doping process and resulting doping profile. In this work, we present a theoretical study using a two-dimensional surface morphology for pyramidally textured samples. The boron diffusivity and segregation coefficient between oxide and silicon in simulation are determined by reproducing measured one-dimensional boron depth profiles prepared using different boron diffusion recipes on planar samples. The established parameters are subsequently used to simulate the boron diffusion process on textured samples. The simulated junction depth is found to agree quantitatively well with electron beam induced current measurements. Finally, chemical passivation on planar and textured samples is compared in device simulation. Particularly, a two-dimensional approach is adopted for textured samples to evaluate chemical passivation. The intrinsic emitter saturation current density, which is only related to Auger and radiative recombination, is also simulated for both planar and textured samples. The differences between planar and textured samples are discussed

Dental OCT

Science.gov (United States)

Wilder-Smith, Petra; Otis, Linda; Zhang, Jun; Chen, Zhongping

This chapter describes the applications of OCT for imaging in vivo dental and oral tissue. The oral cavity is a diverse environment that includes oral mucosa, gingival tissues, teeth and their supporting structures. Because OCT can image both hard and soft tissues of the oral cavity at high resolution, it offers the unique capacity to identity dental disease before destructive changes have progressed. OCT images depict clinically important anatomical features such as the location of soft tissue attachments, morphological changes in gingival tissue, tooth decay, enamel thickness and decay, as well as the structural integrity of dental restorations. OCT imaging allows for earlier intervention than is possible with current diagnostic modalities.

Soil texture derived from topography in North-eastern Amazonia

OpenAIRE

Laurent, François; Poccard-Chapuis, René; Plassin, Sophie; Pimentel Martinez, Gustavo

2017-01-01

We present a 1:100,000 scale soil texture map of Paragominas county (Pará, Brazil), covering 19,330 km2. The method allows rapid production of a soil texture map of a large area where the strength of a duricrust controls the relief. It is based on an easily accessible explanatory variable, topography, which is represented using a Digital Elevation Model. The method makes it possible to map the spatial distribution of the texture of the topsoil layer. Modelling was complemented by field observ...

Factors of Child Dental Fear : A Literature Review of Dental Fear in Children

OpenAIRE

Nakata, Ayumi; Sato, Yoko

2011-01-01

Objectives. To provide an overview of the literature investigating dental fear in children during the past ten years and to review factors of child dental fear. Methods. The literature was systematically retrieved from an electronic database. The thirty four literatures which were written about the fear of dentistry, psychology and behavior during dental treatment were chosen. Results. The terms of fear being used were “Shika-kyoufu”, “Dental fear”, etc. However, the terms were not defined in...

Is treatment under general anaesthesia associated with dental neglect and dental disability among caries active preschool children?

Science.gov (United States)

Kvist, T; Zedrén-Sunemo, J; Graca, E; Dahllöf, G

2014-10-01

To study if treatment under general anaesthesia (GA) is associated with dental neglect or dental disability. This was a retrospective study. Dental records of all children in the age 0-6 years who underwent GA at a specialist paediatric dentistry clinic during 2006-2011 were studied with regard to decayed-missed-filled teeth, traumatic injuries, emergency visits, behaviour management problems and the history of attendance. The final sample consisted of 134 children. Matched controls were selected among recall patients who had not received treatment under GA. Fishers exact test or Pearson Chi-square test analysed response distribution and comparisons between groups, and for multivariate analyses, logistic regression was used. The results show that children treated under GA had significantly higher caries prevalence, apical periodontitis and infections due to pulpal necrosis. Dental neglect as well as dental disability was significantly more prevalent in the GA group compared to the control group. In a multivariate analysis with dental neglect as independent factor, dental disability was the only significant factor (p = 0.006). Children treated under general anaesthesia were significantly more often diagnosed with both dental neglect and dental disability. Dental disability was the only factor significantly related to dental neglect. There is a need for improved documentation in the dental records to better identify dental neglect and dental disability, and also a continued training of dentists regarding child protection.

Hardwood species classification with DWT based hybrid texture ...

Indian Academy of Sciences (India)

to decompose the image up to 7 levels using Daubechies (db3) wavelet as decom ... binary pattern (DWTFOSLBPu2) texture features at the 4th level of image decomposi ...... In addition, inclusion of further levels of image decomposition gives rise to ..... Texture analysis of SAR sea ice imagery using gray level co-occurrence.

Mechanisms of texture evolution during annealing of Zr and Ti alloys

International Nuclear Information System (INIS)

Gerspacher, F.

2007-12-01

Zirconium and Titanium are hexagonal metals. Thus, they have a weaker symmetry than cubic metals, and a stronger crystalline anisotropy. Despite this strong anisotropy, the fundamental mechanisms of the texture evolution of these metals have not been deeply investigated yet. We studied here the texture and microstructure evolution during annealing after several conditions of deformation, and showed that: - slow texture change is expected in grain growth after severe rolling, because of oriented growth - rapid texture change after low reductions is due to oriented nucleation - transverse rolling gives rise to a correlation between orientation and stored energy in the deformed material, which also induces fast texture changes. These mechanisms have been explained on the basis of microstructure specificities. In addition, texture evolution during normal grain growth was studied and the use of modeling allowed to confirm some hypotheses made on boundary mobility anisotropy. The mechanisms of appearance of abnormal grain growth have also been clarified. (author)

Dental Effluent Guidelines

Science.gov (United States)

Overview and documents for Dental Office Category regulation (40 CFR Part 441); comprising pretreatment standards for discharges of dental amalgam pollutants, including mercury, into publicly owned treatment works (POTWs).

Exploring Current and Future Roles of Non-Dental Professionals: Implications for Dental Hygiene Education.

Science.gov (United States)

Maxey, Hannah L; Farrell, Christine; Gwozdek, Anne

2017-09-01

The health care system is undergoing transformation in which oral health is not only valued as an aspect of overall health, but health care delivery systems are aligning to better deliver total patient care. As a result of this transformation, education for many non-dental professionals incorporates oral health content to prepare them to practice in comprehensive delivery models. While some non-dental professionals already incorporate oral health care in their service, many opportunities exist for expansion of oral health care delivery by other non-dental professionals, including radiologic technicians, nursing staff, and human services professionals. As non-dental professionals take on expanded roles in oral health care, the dental hygiene workforce must be prepared to practice in settings with new types of professionals. Dental hygiene curricula should prioritize interprofessional education to best prepare these students for practice in evolved delivery models. This article was written as part of the project "Advancing Dental Education in the 21 st Century."

Dental Environmental Noise Evaluation and Health Risk Model Construction to Dental Professionals.

Science.gov (United States)

Ma, Kuen Wai; Wong, Hai Ming; Mak, Cheuk Ming

2017-09-19

Occupational noise is unavoidably produced from dental equipment, building facilities, and human voices in the dental environment. The purpose of this study was to investigate the effect of occupational noise exposure on the dental professionals' health condition. The psychoacoustics approach noise exposure assessment followed by the health risk assessment was carried on at the paediatric dentistry clinic and the dental laboratory in the Prince Philip Dental Hospital of Hong Kong. The A-weighted equivalent sound level, total loudness, and sharpness values were statistically significantly higher for the noise at the laboratory than that at the clinic. The degree of perceived influences and sharpness of noise were found to have the impacts on the dental professionals' working performance and health. Moreover, the risk of having a bad hearing state would a have 26% and 31% higher chance for a unit increment of the short-term and long-term impact scores, respectively. The dental professionals with the service length more than 10 years and the daily working hours of more than eight showed the highest risk to their hearing state. The worse the hearing state was, the worse the health state was found for the dental professionals. Also, the risk of dissatisfaction would be increased by 4.41 and 1.22 times for those who worked at the laboratory and a unit increment of the long-term impact score. The constructed health risk mode with the scientific and statistical evidence is hence important for the future noise management of environmental improvement.

PREFACE: 17th International Conference on Textures of Materials (ICOTOM 17)

Science.gov (United States)

Skrotzki, Werner; Oertel, Carl-Georg

2015-04-01

The 17th International Conference on Textures of Materials (ICOTOM 17) took place in Dresden, Germany, August 24-29, 2014. It belongs to the "triennial" series of ICOTOM meetings with a long tradition, starting in 1969 - Clausthal, 1971 - Cracow, 1973 - Pont-à-Mousson, 1975 - Cambridge, 1978 - Aachen, 1981 - Tokyo, 1984 - Noordwijkerhout, 1987 - Santa Fe, 1990 - Avignon, 1993 - Clausthal, 1996 - Xian, 1999 - Montreal, 2002 - Seoul, 2005 - Leuven, 2008 - Pittsburgh, 2011 - Mumbai, 2014 - Dresden. ICOTOM 17 was hosted by the Dresden University of Technology, Institute of Structural Physics. Following the tradition of the ICOTOM conferences, the main focus of ICOTOM-17 was to promote and strengthen the fundamental understanding of the basic processes that govern the formation of texture and its relation to the properties of polycrystalline materials. Nonetheless, it was the aim to forge links between basic research on model materials and applied research on engineering materials of technical importance. Thus, ICOTOM 17 provided a forum for the presentation and discussion of recent progress in research of texture and related anisotropy of mechanical and functional properties of all kinds of polycrystalline materials including natural materials like rocks. Particular attention was paid to recent advances in texture measurement and analysis as well as modeling of texture development for all kinds of processes like solidification, plastic deformation, recrystallization and grain growth, phase transformations, thin film deposition, etc. Hence, ICOTOM 17 was of great interest to materials scientists, engineers from many different areas and geoscientists. The topics covered by ICOTOM 17 were: 1. Mathematical, numerical and statistical methods of texture analysis 2. Deformation textures 3. Crystallization, recrystallization and growth textures 4. Transformation textures 5. Textures in functional materials 6. Textures in advanced materials 7. Textures in rocks 8. Texture

Mandatory Clinical Practice for Dental and Dental Hygiene Faculty.

Science.gov (United States)

Cameron, Cheryl A.; And Others

1982-01-01

Dental and dental hygiene faculty should maintain their clinical skills through regular practice, to improve their ability to relate to students through instruction, provide an additional source of income, and improve their image in the community. Institutional policies fostering and regulating faculty practice plans are suggested. (Author/MSE)

The Management of Dental Waste in Dental Offices and Clinics in Shiraz, Southern Iran

Directory of Open Access Journals (Sweden)

M Danaei

2014-01-01

Full Text Available Background: Dental waste can be hazardous to humans and the environment. Objective: To determine the current status of dental waste management in private and public dental clinics and private dental offices in Shiraz, southern Iran. Methods: This cross-sectional study was conducted at the Shiraz University of Medical Sciences from February through June 2013. A stratified random sampling method was used to study 86 private offices, 14 private clinics and 10 public clinics. Types of waste studied included mercury and amalgam, lead foil packets, sharps, infectious tissues and fluids, pharmaceuticals and domestic waste materials. Compliance with established standards by the monitored dental offices and clinics and public clinics were compared. Results: 89.1% of dental offices and clinics disposed their infectious waste with domestic waste. Only 60% of centers used standard method for sharps disposal. None of the dental centers disposed their pharmaceutical waste and x-ray fixer waste by standard methods. Less than 10% of centers recycled the amalgam and lead foil pockets waste to the manufacture. Conclusion: Government agencies should establish monitoring programs for all dental offices and clinics to identify noncompliant activity and enforce recommended regulations.

21 CFR 872.3700 - Dental mercury.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Dental mercury. 872.3700 Section 872.3700 Food and... DENTAL DEVICES Prosthetic Devices § 872.3700 Dental mercury. (a) Identification. Dental mercury is a... dental cavity or a broken tooth. (b) Classification. Class I. ...

Determining the direction of tooth grinding: an in vitro study.

Science.gov (United States)

ten Berge, F; te Poel, J; Ranjitkar, S; Kaidonis, J A; Lobbezoo, F; Hughes, T E; Townsend, G C

2012-08-01

The analysis of microwear patterns, including scratch types and widths, has enabled reconstruction of the dietary habits and lifestyles of prehistoric and modern humans. The aim of this in vitro study was to determine whether an assessment of microwear features of experimental scratches placed on enamel, perpendicularly to the direction of grinding, could predict the grinding direction. Experimental scratches were placed using a scalpel blade on standardised wear facets that had been prepared by wearing opposing enamel surfaces in an electromechanical tooth wear machine. These control 'baseline' facets (with unworn experimental scratches) were subjected to 50 wear cycles, so that differential microwear could be observed on the leading and trailing edges of the 'final' facets. In Group 1 (n=28), the 'footprint' microwear patterns corresponding to the known grinding direction of specimens in the tooth wear machine were identified. Then, they were used to predict the direction of tooth grinding blindly in the same sample after a 2-week intermission period. To avoid overfitting the predictive model, its sensitivity was also cross-validated in a new sample (Group 2, n=14). A crescent-shaped characteristic observed in most experimental scratches matched the grinding direction on all occasions. The best predictor of the direction of grinding was a combined assessment of the leading edge microwear pattern and the crescent characteristic (82.1% in Group 1 and 92.9% in Group 2). In conclusion, a simple scratch test can determine the direction of tooth grinding with high reliability, although further improvement in sensitivity is desirable. © 2012 Blackwell Publishing Ltd.

Access to dental care-parents' and caregivers' views on dental treatment services for people with disabilities.

LENUS (Irish Health Repository)

Prabhu, Neeta T

2010-03-01

The goal of this study was to elicit the views of patients or parents\\/caregivers of patients with disabilities regarding access to dental care. A questionnaire was generated both from interviews with patients\\/parents\\/caregivers already treated under sedation or general anesthesia as well as by use of the Delphi technique with other stakeholders. One hundred thirteen patients from across six community dental clinics and one dental hospital were included. Approximately, 38% of the subjects used a general dental practitioner and 35% used the community dental service for their dental care, with only 27% using the hospital dental services. Overall waiting time for an appointment at the secondary care setting was longer than for the primary care clinics. There was a high rate of parent\\/caregiver satisfaction with dental services and only five patients reported any difficulty with travel and access to clinics. This study highlights the need for a greater investment in education and training to improve skills in the primary dental care sector.

Textured ZnO thin films by RF magnetron sputtering

CERN Document Server

Ginting, M; Kang, K H; Kim, S K; Yoon, K H; Park, I J; Song, J S

1999-01-01

Textured thin films ZnO has been successfully grown by rf magnetron sputtering method using a special technique of introducing a small amount of water and methanol on the deposition chamber. The grain size of the textured surface is highly dependent on the argon pressure during the deposition. The pressure in this experiment was varied from 50 mTorr down to 5 mTorr and the highest grain size of the film is obtained at 5 mTorr. The total transmittance of the films are more than 85% in the wavelength of 400 to 800 nm, and haze ratio of about 14% is obtained at 400 nm wavelength. Beside the textured surface, these films also have very low resistivity, which is lower than 1.4x10 sup - sup 3 OMEGA centre dot cm. X-ray analysis shows that the films with textured surface have four diffraction peaks on the direction of (110), (002), (101) and (112), while the non-textured films have only (110) and (002) peaks. Due to the excellent characteristics of this film, it will make the film very good TCO alternatives for the ...

Dental PACS development in Korea

International Nuclear Information System (INIS)

Kim, Eun Kyung

2008-01-01

Picture archiving and communication system (PACS) is an image information technology system for the transmission and storage of medical images. In Korea the first full PACS was installed at Samsung Medical Center in 1994, but, the rate of distribution was very slow. The government's approval for the medical insurance reimbursement for full PACS examinations in November 1999 became the turning point. Thereafter the number of hospitals with full PACS has steeply increased. In September of this year, PACS was installed at 906 medical institutes, including most of university hospitals and general hospitals. The first full dental PACS was installed at Wonkwang University Dental Hospital in 2002. Now ten out of eleven university dental hospitals implemented full dental PACS. The current status and technological factors of dental PACS in Korean university dental hospitals and the future perspectives of dental PACS are described.

Control of texture in Ag and Ag-alloy substrates for superconducting tapes

International Nuclear Information System (INIS)

Gladstone, T.A.

2000-01-01

The use of a biaxially textured silver tape as a substrate for high temperature superconductor (HTS) phases is one possible route towards the fabrication of high-J c superconducting tape. Using a cold-rolling and annealing process we have reproducibly fabricated {110} textured silver which is stable up to 900 deg. C. We have found that there are two critical process requirements for the formation of this texture; a low oxygen content in the material prior to deformation, and a cold-rolling thickness reduction of less than 97%. To overcome the problems associated with the poor mechanical strength of pure silver, texture development in Ag-Mg and Ag-Hf alloys with improved mechanical properties has been studied. Heat treatments in a reducing atmosphere allow the {110} annealing texture to be obtained in Ag-0.1 wt%Mg. The recrystallization behaviour of a Ag-Pd alloy with an increased stacking fault energy was also investigated and a partial cube texture was obtained in this material. Using orientation distribution function (ODF) analysis we have shown that minor variations in the deformation texture of both pure silver and Ag-based alloys can lead to significant differences in the recrystallization textures obtained. (author)

Microstructure and local texture of partially recrystallized titanium sheet

International Nuclear Information System (INIS)

Zaefferer, S.; Schwarzer, R.A.

1993-01-01

The microstructure of TiAl6V4 sheet was investigated by transmission electron microscopy. Two types of microstructure were found: regions with a recrystallized and regions with a deformed structure. They could be distinguished from each other by grain size and shape, by the dislocation density and local texture. The orientations of individual grains were measured by on-line interpretation of Kikuchi patterns with a TEM. The results were represented on inverse pole figures. The deformed structure showed a strong preferred orientation (11 anti 20)[10 anti 10], while the texture of the recrystallized areas was substantially weaker containing other preferred orientations. The global texture of the sample was investigated by measuring pole figures with an x-ray texture goniometer. The ODF as well as inverse pole figures were calculated and compared to the TEM pole figures. (orig.)

An overview of dental radiology: a primer on dental radiology

International Nuclear Information System (INIS)

Manny, E.F.; Carlson, K.C.; McClean, P.M.; Rachlin, J.A.; Segal, P.

1980-01-01

To provide medical and scientific background on certain selected technologies generally considered to be of particular significance, the National Center for Health Care Technology (NCHCT) has commissioned a series of overview papers. This is one of several projects entered into jointly by the Bureau of Radiological Health (BRH) and NCHCT relating to the use of radiation for health care. Dental radiation protection has been a long-time interest of BRH. Both past and on-going efforts to minimize population radiation exposure from electronic products have included specific action programs directed at minimizing unnecessary radiation exposure to the population from dental radiology. Current efforts in quality assurance and referral criteria are two aspects of NCHCT's own assessment of this technology which are described within the larger picture presented in this overview. The issues considered in this document go beyond the radiation exposure aspects of dental x-ray procedures. To be responsive to the informational needs of NCHCT, the assessment includes various other factors that influence the practice of dental radiology. It is hoped this analysis will serve as the basis for planning and conducting future programs to improve the practice of dental radiology

Evaluation of radiation effects on dental enamel hardness and dental restorative materials

International Nuclear Information System (INIS)

Adachi, Lena Katekawa; Saiki, Mitiko; Campos, Tomie Nakakuki

2000-01-01

This research presents the results of the microhardness of human dental enamel and of the following dental restorative materials: three dental porcelains - Ceramco II, Finesse and Noritake, and two resin restorative materials - Artglass and Targis, for materials submitted to different times of irradiation at the IEA-R1m nuclear reactor under a thermal neutron flux of 10 12 n cm -2 .s -1 . The results obtained indicated that there is a decrease of the surface microhardness when the enamel is irradiated for 1 h and when dental materials are irradiated for 3 h. However, enamels irradiated for 30 min. did not show significant change of their surface hardness. Therefore, the selection of irradiation time is an important factor to be considered when irradiated teeth or dental materials are used in the investigations of their properties. (author)

Chameleons: Reptilian Texture

Science.gov (United States)

Petersen, Hugh

2009-01-01

This article presents an art project inspired by a drawing of a chameleon the author saw in an art-supply catalog. Chameleons prove to be a good subject to highlight shape, color and texture with eigth-graders. In this project, middle- and high-school students draw a chameleon, learn how to use shapes to add to their chameleon drawing, learn how…

Extrusion Cooking Systems and Textured Vegetable Proteins

Directory of Open Access Journals (Sweden)

2015-02-01

Full Text Available Many fabricated foods are cooked industrially and are given desired textures, shapes, density and rehydration characteristics by an extrusion cooking process. This relatively new process is used in the preparation of “engineered” convenience foods: textured vegetable proteins, breakfast cereals, snacks, infant foods, dry soup mixes, breading, poultry stuffing, croutons, pasta products, beverage powders, hot breakfast gruels, and in the gelatinization of starch or the starchy component of foods.

Dental status and dental caries in 85-year-old Danes

DEFF Research Database (Denmark)

Vilstrup, Lene; Holm-Pedersen, Poul; Mortensen, Erik Lykke

2007-01-01

OBJECTIVES: This study reports findings on the dental status and the prevalence of dental caries among a group of 85-year-old Danes from the Glostrup 1914 Cohort, Denmark. The purpose of the study was to analyse whether caries experience was related to number of teeth and to indicators...... of functional ability and cognitive function. METHODS: A total of 191 individuals (78 men and 113 women) participated in a cross-sectional population study conducted in 2000. Using mobile dental equipment, a clinical oral examination and an interview were administered to all participants in their homes...... and cognitive impairment tended to have more active caries than 85-year-olds with no impairment. CONCLUSIONS: A substantial proportion of 85-year-old individuals had retained a natural dentition; however, active dental caries is a problem of concern among the most elderly....

Molar incisor hypomineralisation (MIH): correlation with dental caries and dental fear.

Science.gov (United States)

Kosma, I; Kevrekidou, A; Boka, V; Arapostathis, K; Kotsanos, N

2016-04-01

This cross-sectional study was to investigate correlations between molar incisor hypomineralisation (MIH), dental caries and child dental fear. The subjects in the study were representative samples of 8 and 14 year old children from three Greek cities (total N = 2335). Dental examinations were performed by one calibrated examiner in classrooms, after the children had brushed their teeth, using an intraoral mirror and artificial room light supplemented by a penlight. All the children completed the children's fear survey schedule-dental subscale (CFSS-DS) questionnaire. MIH scores were recorded using EAPD criteria and dental caries experience by DMFS/dmfs index. Data were analysed with the Chi-squared (χ (2)), Mann-Whitney and Spearman's rank correlation coefficient tests. The mean DMFS in children with MIH (8-year olds: 1.60 ± 2.01, 14-year olds: 4.60 ± 4.41) was statistically significantly higher than children without MIH (8-year olds: 1.01 ± 1.78, 14-year olds: 3.46 ± 4.28) (p MIH had statistically significantly higher mean DMFS scores than children with mild or no MIH (p MIH status (p = 0.332). Caries experience was associated with the MIH status of the first permanent molars in both age groups (p MIH (26.5 ± 9.6) (p = 0.339), regardless of MIH severity. A positive association between MIH and dental caries was confirmed and a lack of association found between MIH and dental fear in Greek children.

A humanistic environment for dental schools: what are dental students experiencing?

Science.gov (United States)

Quick, Karin K

2014-12-01

A Commission on Dental Accreditation (CODA) standard now requires that dental schools commit to establishing a "humanistic culture and learning environment" for all members of the academic environment. The aim of this study was to identify students' perceptions of factors that affect the dental school environment and to test differences in their experiences in terms of gender and year. This picture of the existing environment was meant to serve as a first step toward creating and supporting a more humanistic academic environment. A mixed-methods approach was used for data collection during the 2009-10 and 2010-11 academic years at one U.S. dental school. Four focus groups were first conducted to explore challenges and conflicts faced by students during their dental education. A written survey informed by the focus group results was then used to obtain quantitative data. The survey response rate was 47 percent (N=188). Faculty inconsistency, cheating, and belittlement/disrespect were experienced by many of the responding dental students during their education, similar to what has been documented in medicine. These students also reported experiencing both constructive communication (90 percent) and destructive communication (up to 32 percent). The female students reported more gender discrimination and sexual harassment than their male peers, and the clinical students reported more experience with belittlement and destructive communication than the preclinical students. The results suggest that greater effort should be directed toward creating a more humanistic environment in dental schools. Based on the issues identified, steps academic institutions can take to improve these environments and student skills are outlined.

Measurement of food texture by an acoustic vibration method

Science.gov (United States)

Sakurai, Naoki; Taniwaki, Mitsuru; Iwatani, Shin-ichiro; Akimoto, Hidemi

2011-09-01

Food texture was measured by a new acoustic vibration method. A piezoelectric sensor sandwiched between a probe and piston was inserted into a food sample by delivery of silicon oil to a cylinder by a pump. Vibration emitted from the food sample on insertion of the probe was monitored by voltage outputs of the sensor. The voltage signals were passed through 19 half octave bands to calculate texture index for each band. The texture index was defined as vibration energy of the probe caused by the food rupture and/or breakage per unit time.