WorldWideScience

Sample records for deming management method

  1. Total Quality Management and Media Services: The Deming Method.

    Science.gov (United States)

    Richie, Mark L.

    1992-01-01

    W. Edwards Deming built a 40-year record of quality management in Japan known as Total Quality Management (TQM). His 14 points require a change in the belief system of managers and media directors, but their implementation in government agencies and schools will produce increased time for better services, better communications, and new programs.…

  2. Restructuring Schools by Applying Deming's Management Theories.

    Science.gov (United States)

    Melvin, Charles A., III

    1991-01-01

    Four school districts adopted a school restructuring project using Deming's business management method. Deming offered alternative views of organizations based on psychology, systems, perceptual framework, and causes of variance. He listed 14 points for quality improvement. Evaluation indicated that key staff members willingly engaged in…

  3. Quality improvement at GPU nuclear through application of the Deming management method

    International Nuclear Information System (INIS)

    Keaten, R.W.

    1991-01-01

    GPU Nuclear Corporation (GPUNC) is taking significant initiatives to upgrade the quality of our activities, both at the plant sites and at the corporate headquarters. One part of the corporation's basic philosophy has been a continuing Search for Excellence which recognizes that any level of performance can always be improved. About two years ago the company did an evaluation of management and decided to adapt relevant aspects of this philosophy to the specific needs of GPUNC. One reason for this decision was that many ideas advocated by Dr. Deming were consistent with company activities already completed or in progress. This paper discusses our progress in applying this philosophy to GPUNC activities

  4. W. Edwards Deming, quality analysis, and total behavior management.

    Science.gov (United States)

    Saunders, R R; Saunders, J L

    1994-01-01

    During the past 10 years, the inclusion of the word "quality" in descriptions of production methods, management approaches, educational systems, service system changes, and so forth, has grown exponentially. It appears that no new approach to any problem is likely to be given much consideration today without overt acknowledgment that some improvement in quality must be the outcome. The origins of the importance of quality are primarily rooted in the awakening recognition of the influence of W. Edwards Deming in the post-World War II restoration of Japanese industry. We provide a brief overview of Deming's approach to modernizing management methods and discuss recent criticisms from the field of organizational behavior management that his approach lacks emphasis on the role of reinforcement. We offer a different analysis of Deming's approach and relate its evolution to the contingencies of reinforcement for the behavior of consulting. We also provide an example of problem solving with Deming's approach in a social service setting familiar to many behavior analysts.

  5. The Deming Method: Systems Theory for Educational Technology Services.

    Science.gov (United States)

    Richie, Mark L.

    1993-01-01

    Discusses quality management principles as taught by W. Edwards Deming and describes their applications to educational technology services. Traditional organizational charts are explained; and benefits of using flow charts in Deming's systems are described, including better communications between departments, building teamwork, and opportunities…

  6. Quality Management in Career Services, a la Deming.

    Science.gov (United States)

    Korschgen, Ann J.; Rounds, Dan

    1992-01-01

    Describes career services program at University of Wisconsin-La Crosse that adapted material from W.E. Deming's quality control manual to the needs of its office. Discusses Deming's work and its implications for career services professionals, then describes application of Deming's model to the career services program. (NB)

  7. Gains that could be achieved through full application of Deming's total quality management

    OpenAIRE

    Price, Nathaniel.

    2007-01-01

    In his seminal work, Out of the Crisis, W. Edwards Deming provided American corporations with a direction and method for improving both man and machine in an effort to transform the way in which these corporations performed and managed both service and industry functions. His ideas for statistical control have taken hold within the workplace and are becoming increasingly popular among managers and corporate executives who are intent on improving the bottom line. However, most companies have l...

  8. W. Edwards Deming and total quality management: an interpretation for nursing practice.

    Science.gov (United States)

    Williams, T; Howe, R

    1992-01-01

    The purpose of this article is to introduce nurses to W. Edwards Deming and the 14 points of his management philosophy, the basis of total quality management (TQM) (Deming, 1986). Each of Deming's points has been subject to in-depth analysis from business executives for the past 40 years. Quality improvement is at the very center of TQM. To adopt TQM will require a major thought transformation for many nursing leaders, but the benefits that nurses and the profession as a whole can reap from this revolutionary style of management make the effort to change worthwhile. If you are not satisfied with the status quo and are looking for a better way to conduct business, the information in this article will begin to define quality improvement and will help you strive for the highest possible level of service to your ultimate customer--the patient.

  9. SOME ASPECTS OF TOTAL QUALITY MANAGEMENT: USING THE DEMING CYCLE IN THE MANAGEMENT OF TAXES

    OpenAIRE

    DANIELA-LIDIA ROMAN

    2012-01-01

    Activity for establishing, collecting and tracking collecting of taxes (AFECTCT) is important for public finances because the taxes provide most of the public funds, and, at the same time, they are important levers which the state influence the behavior of entrepreneurs and consumers. Because the economic literature are few attempts to improve the activities in the taxes area through the Total Quality Management (TQM) by applying Deming model, in this paper, using the four sequential processe...

  10. Toward a System of Total Quality Management: Applying the Deming Approach to the Education Setting.

    Science.gov (United States)

    McLeod, Willis B.; And Others

    1992-01-01

    Recently, the Petersburg (Virginia) Public Schools have moved away from a highly centralized organizational structure to a Total Quality Management system featuring shared decision making and school-based management practices. The district was guided by Deming's philosophy that all stakeholders should be involved in defining the level of products…

  11. Total Quality Education: Profiles of Schools That Demonstrate the Power of Deming's Management Principles.

    Science.gov (United States)

    Schmoker, Michael J.; Wilson, Richard B.

    This book presents profiles of schools that have demonstrated the power of Deming's Total Quality Management (TQM) principles. It describes schools that have successfully applied those strategies for change. The book explores what public education needs most--a compelling but flexible action plan for improvement. Chapter 1 offers a rationale for…

  12. W. Edwards Deming, quality analysis, and total behavior management

    OpenAIRE

    Saunders, Richard R.; Saunders, Jay L.

    1994-01-01

    During the past 10 years, the inclusion of the word “quality” in descriptions of production methods, management approaches, educational systems, service system changes, and so forth, has grown exponentially. It appears that no new approach to any problem is likely to be given much consideration today without overt acknowledgment that some improvement in quality must be the outcome. The origins of the importance of quality are primarily rooted in the awakening recognition of the influence of W...

  13. DEM4-26, Least Square Fit for IBM PC by Deming Method

    International Nuclear Information System (INIS)

    Rinard, P.M.; Bosler, G.E.

    1989-01-01

    1 - Description of program or function: DEM4-26 is a generalized least square fitting program based on Deming's method. Functions built into the program for fitting include linear, quadratic, cubic, power, Howard's, exponential, and Gaussian; others can easily be added. The program has the following capabilities: (1) entry, editing, and saving of data; (2) fitting of any of the built-in functions or of a user-supplied function; (3) plotting the data and fitted function on the display screen, with error limits if requested, and with the option of copying the plot to the printer; (4) interpolation of x or y values from the fitted curve with error estimates based on error limits selected by the user; and (5) plotting the residuals between the y data values and the fitted curve, with the option copying the plot to the printer. 2 - Method of solution: Deming's method

  14. Total quality control: the deming management philosophy applied to nuclear power plants

    International Nuclear Information System (INIS)

    Heising, C.D.; Wetherell, D.L.; Melhem, S.A.; Sato, M.

    1987-01-01

    In recent years, a call has come for the development of inherently safe nuclear reactor systems that cannot have large-scale accidents. In the search for the perfect inherently safe reactor system, some are calling for the institution of computerized automated control of reactors eliminating most human operators from the control room. A different approach to the problem of the control of inherently safe reactors is that both future and present nuclear power plants need to institute total quality control (TQC) to plant operations and management. The Deming management philosophy of TQC has been implemented in a wide range of industries - particularly in Japan and the US. Specific attention is given, however, to TQC implementation in the electric power industry as applied to nuclear plants. The Kansai Electric Power Company and Florida Power and Light Company have recently implemented TQC. Statistical quality control methods have been applied to monitor and control reactor variables (for example, to the steam generator water level important to start-up operations of pressurized water reactors)

  15. Total Quality Management in Higher Education: Applying Deming's Fourteen Points.

    Science.gov (United States)

    Masters, Robert J.; Leiker, Linda

    1992-01-01

    This article presents guidelines to aid administrators of institutions of higher education in applying the 14 principles of Total Quality Management. The principles stress understanding process improvements, handling variation, fostering prediction, and using psychology to capitalize on human resources. (DB)

  16. Think Quality! The Deming Approach Does Work in Libraries.

    Science.gov (United States)

    Mackey, Terry; Mackey, Kitty

    1992-01-01

    Presents W. Edwards Deming's Total Quality Management method and advocates its adoption in libraries. The 14 points that form the basis of Deming's philosophy are discussed in the context of the library setting. A flow chart of the reference process and user survey questions are included. (MES)

  17. Dr. Deming Comes to Class.

    Science.gov (United States)

    Gartner, William B.

    1993-01-01

    One college faculty member's experiences in applying Deming management theory to his business courses to improve instruction are discussed. Key issues in the Deming philosophy are outlined, course changes based on them are described, and outcomes are examined. Suggestions are offered for overcoming institutional and ideological barriers. (MSE)

  18. Our Deming Users' Group.

    Science.gov (United States)

    Dinklocker, Christina

    1992-01-01

    After training in the Total Quality Management concept, a suburban Ohio school district created a Deming Users' Group to link agencies, individuals, and ideas. The group has facilitated ongoing school/business collaboration, networking among individuals from diverse school systems, mentoring and cooperative learning activities, and resource…

  19. Penerapan Falsafah Deming di Perpustakaan

    Directory of Open Access Journals (Sweden)

    Anindya Gita P

    2018-02-01

    Full Text Available Abstract Today, the awareness of the importance of developing quality not only in business, but also penetrated in the field of non-profit as a library. Libraries in Indonesia are starting to realize the importance to promote the quality. Proven by the implementation of quality management systems in several libraries in Indonesia, for example, with ISO 9001: 2008 as well as the application of Total Quality Management from Japan. One influential figure in this field is W. Edwards Deming, an American statistician and management consultant. Deming had transformed Japan from the downturn as a result of the second world war into the advanced industrial countries. Deming's famous philosophy of quality that is 14 points the key to successful management. Although the philosophy of quality management is made in the fields of industry, but this theory can be applied also in the field of non-profit as a library. Deming theory concepts can help an organization's library to determine the appropriate steps in achieving quality services.   Keyword : Quality Management, Library Management, Management Figures   Abstrak Saat ini kesadaran akan nilai penting mutu berkembang tidak hanya pada bidang bisnis tetapi juga merambah dalam bidang non profit seperti perpustakaan. Perpustakaan di Indonesia mulai menyadari pentingnya untuk mengedepankan mutu. Terbukti dengan adanya penerapan sistem manajemen mutu di beberapa perpustakaan di Indonesia, contohnya dengan ISO 9001:2008 maupun penerapan Total Quality Manajemen yang berasal dari Jepang. Salah satu tokoh yang berpengaruh dalam bidang ini yaitu W. Edwards Deming, seorang ahli statistik Amerika dan konsultan manajemen. Deming telah berhasil merubah kondisi Jepang yang terpuruk akibat dari perang dunia kedua menjadi negara industri yang maju. Falsafah mutu Deming yang terkenal yaitu 14 poin kunci sukses manajemen. Walaupun falsafah manajemen mutu ini dibuat dalam bidang industri, namun teori ini bisa diterapkan juga

  20. The Total Quality Management philosophy: The Deming's principles in two Portuguese institutions of high education

    OpenAIRE

    Saraiva, Margarida

    2006-01-01

    Usually, the process of TQM is implemented in the industry and in services through the adoption of a group of principles. Deming that presented a set of principles to improve the quality process in a organisation. The study applied some of the Deming’s principles in two Portuguese institutions of high education. The objective was to understand if the Deming’s principles could be applied. The results showed a group of possible difficulties and benefits and concluded that can be ...

  1. The Educational Consequences of W. Edwards Deming.

    Science.gov (United States)

    Holt, Maurice

    1993-01-01

    Taylorism (the rational-managerial model) still dominates U.S. education. Deming's quality and improvement concepts cut much deeper than "total quality management" externalities and differ markedly from management by objectives or outcome-based education approaches. The Deming approach is no quick fix but requires a fundamental change in…

  2. Penerapan Falsafah Deming di Perpustakaan

    OpenAIRE

    Anindya Gita P

    2018-01-01

    Abstract Today, the awareness of the importance of developing quality not only in business, but also penetrated in the field of non-profit as a library. Libraries in Indonesia are starting to realize the importance to promote the quality. Proven by the implementation of quality management systems in several libraries in Indonesia, for example, with ISO 9001: 2008 as well as the application of Total Quality Management from Japan. One influential figure in this field is W. Edwards Deming, ...

  3. Three Experts on Quality Management: Philip B. Crosby, W. Edwards Deming, Joseph M. Juran

    Science.gov (United States)

    1992-07-01

    Department of the Navy Office of the Under Secretary of the Navy Total Quality Leadership Omce THREE EXPERTS ON QUALITY MANAGEMENT : PHILIP B. CROSBY W...research, as the "price of nonconformance." To aid managers in statistical theory , statistical thinking, and the application tracking the cost of doing...Quality Management emphasizes that the process must become a way of life in Theory of Systems. "A system is a series of the organization. Continuance is

  4. Can Deming's Concept of Total Quality Management Be Applied to Education?

    Science.gov (United States)

    Sevick, Charles

    This paper explores the meaning of Total Quality Management (TQM), examines the development of the concept, and assesses the application of TQM to education. In summary, TQM has the following points of relevance for education: (1) The interest and welfare of every student must be a primary concern; (2) the authoritarian management model does not…

  5. Gains That Could Be Achieved through Full Application of Deming's Total Quality Management

    National Research Council Canada - National Science Library

    Price, Nathaniel

    2007-01-01

    .... His ideas for statistical control have taken hold within the workplace and are becoming increasingly popular among managers and corporate executives who are intent on improving the bottom line...

  6. QUALITY LEADERS - LEARNING FROM THE DEMING PRIZE WINNERS IN INDIA

    OpenAIRE

    Jagadeesh Rajashekharaiah

    2014-01-01

    Different governments and professional agencies have set up a number of awards to recognize and reward quality initiatives. Deming Prize is one such award and ever since it was open for companies from outside Japan, maximum number of winning companies are from India, with 20 companies winning the Deming Prize and four among them also winning the Deming Grand Prize. This paper traces the path taken by these companies to know how these companies embarked a journey of Total Quality Management (T...

  7. Why Deming and OBE Don't Mix.

    Science.gov (United States)

    Holt, Maurice

    1995-01-01

    The central idea in W. Edwards Deming's approach to quality management is the need to improve process. Outcome-based education's central defect is its failure to address process. Deming would reject OBE along with management-by-objectives. Education is not a product defined by specific output measures, but a process to develop the mind. (MLH)

  8. Deming's System of Profound Knowledge: An Overview for International Educators.

    Science.gov (United States)

    Evans, Thomas J.

    W. Edwards Deming called for the transformation to a new style of organizational management based on greater cooperation between managers and employees. This transformation could be achieved by introducing "profound knowledge" into the system. This paper is a presentation outline that was used to introduce the basics of Deming's theory…

  9. Deming on Education: A View from the Seminar.

    Science.gov (United States)

    Holt, Maurice

    1993-01-01

    W. Edwards Deming rejects school-improvement proposals based on formulating higher standards and enforcing them with performance assessments. To Deming, the Bush Administration's America 2000 education strategy is "a horrible example of numerical goals, tests, rewards, but no method." Emphasizing rationalist performance measures…

  10. Deming's Quality: Our Last but Best Hope.

    Science.gov (United States)

    Schenkat, Randy

    1993-01-01

    If educators endorse Alfie Kohn's surface message about Total Quality Management, they may miss opportunity to professionalize education. Deming's system of profound knowledge (interaction of theories of systems, knowledge, psychology, and variation) is a model for educated people grappling with life's complexities. Moreover, gaining community…

  11. Translating Deming's 14 Points for Education.

    Science.gov (United States)

    Melvin, Charles A., III

    1991-01-01

    A consortium of four Wisconsin school districts has decided to stop tinkering with the educational system and apply W. Edward Deming's 14 management points to total system improvement. The rewritten precepts involve creating and adopting a fitting purpose, infusing quality into the educational "product," and working toward zero defects…

  12. QUALITY LEADERS - LEARNING FROM THE DEMING PRIZE WINNERS IN INDIA

    Directory of Open Access Journals (Sweden)

    Jagadeesh Rajashekharaiah

    2014-09-01

    Full Text Available Different governments and professional agencies have set up a number of awards to recognize and reward quality initiatives. Deming Prize is one such award and ever since it was open for companies from outside Japan, maximum number of winning companies are from India, with 20 companies winning the Deming Prize and four among them also winning the Deming Grand Prize. This paper traces the path taken by these companies to know how these companies embarked a journey of Total Quality Management (TQM and reached their goal of winning the prestigious Deming Prize. The common working principles of these companies and the various tools and techniques used by them are described in a concise manner in this paper. Further, the paper highlights the lessons from these companies to inspire others. The data taken from the respective websites of the companies has been used to list out the objectives, methodologies, and the benefits accrued by the companies.

  13. Improving validation methods for molecular diagnostics: application of Bland-Altman, Deming and simple linear regression analyses in assay comparison and evaluation for next-generation sequencing.

    Science.gov (United States)

    Misyura, Maksym; Sukhai, Mahadeo A; Kulasignam, Vathany; Zhang, Tong; Kamel-Reid, Suzanne; Stockley, Tracy L

    2018-02-01

    A standard approach in test evaluation is to compare results of the assay in validation to results from previously validated methods. For quantitative molecular diagnostic assays, comparison of test values is often performed using simple linear regression and the coefficient of determination (R 2 ), using R 2 as the primary metric of assay agreement. However, the use of R 2 alone does not adequately quantify constant or proportional errors required for optimal test evaluation. More extensive statistical approaches, such as Bland-Altman and expanded interpretation of linear regression methods, can be used to more thoroughly compare data from quantitative molecular assays. We present the application of Bland-Altman and linear regression statistical methods to evaluate quantitative outputs from next-generation sequencing assays (NGS). NGS-derived data sets from assay validation experiments were used to demonstrate the utility of the statistical methods. Both Bland-Altman and linear regression were able to detect the presence and magnitude of constant and proportional error in quantitative values of NGS data. Deming linear regression was used in the context of assay comparison studies, while simple linear regression was used to analyse serial dilution data. Bland-Altman statistical approach was also adapted to quantify assay accuracy, including constant and proportional errors, and precision where theoretical and empirical values were known. The complementary application of the statistical methods described in this manuscript enables more extensive evaluation of performance characteristics of quantitative molecular assays, prior to implementation in the clinical molecular laboratory. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  14. On Deming and School Quality: A Conversation with Enid Brown.

    Science.gov (United States)

    Brandt, Ron

    1992-01-01

    A Deming expert explains that his 14 principles are no recipe but must be combined with the theory of profound knowledge, which poses essential questions and recognizes the importance of human variation, intrinsic motivation, and external rewards. She also debunks grading, formal teacher evaluation, tracking, and decentralized management. (MLH)

  15. Using Deming To Improve Quality in Colleges and Universities.

    Science.gov (United States)

    Cornesky, Robert A.; And Others

    Of all the people known for stressing quality in industry, W. Edwards Deming is the pioneer. He stresses statistical process control (SPC) and a 14-point process for managers to improve quality and productivity. His approach is humanistic and treats people as intelligent human beings who want to do a good job. Twelve administrators in a university…

  16. Defining Instructional Quality by Employing the Total Quality Management (TQM) Method: A Research Project.

    Science.gov (United States)

    Croker, Robert E.; And Others

    The feasibility of using W. E. Deming's total quality management (TQM) method to define instructional quality was examined by surveying three groups of students attending Idaho State University's College of Education and School of Applied Technology: 31 students seeking cosmetology certification; 75 undergraduates pursuing degrees in corporate…

  17. Dr. Deming and the Improvement of Schooling: No Instant Pudding.

    Science.gov (United States)

    Holt, Maurice

    1993-01-01

    To keep Deming's ideas alive, this article reexamines how Deming's philosophy connects with education and discusses implications for educators, parents, and legislators. Expecting to achieve "quality" results in little time encourages "quick fixes" and a crisis mentality that distort Deming's message and lead nowhere. There are…

  18. Quality Management in Education.

    Science.gov (United States)

    Tribus, Myron

    When transferring the methods of quality management from industry to academia, there are important differences that must be considered. This paper describes the differences between traditional management and quality management, and shows how Deming's principles of Total Quality Management (TQM) can be applied to education. Some of these principles…

  19. Zur Thematisierung bei alit. deme (→ dedame

    Directory of Open Access Journals (Sweden)

    Alfred Bammesberger

    2011-12-01

    Full Text Available DĖL S. LIE. DEME (→ DEDAME TEMATIZACIJOSReziumėSenuosiuose lietuvių kalbos paminkluose randama atematinė paradigma demi, desi ir t. t. yra paveldėta iš indoeuropiečių *dhe-dhǝ- >baltų ded-. Dėl fonologinių priežasčių -d- išnyko prieš priebalsį. Kamieno *ded- (dedu, dedi ir t. t. tematizacija buvo įmanoma tik tuo atveju, jeigu esamojo laiko paradigma turėjo formas, kuriose buvo išlaikyta -d-. Vienintelė forma, turinti šį kamie­ną iš indoeuropiečių laikų, yra veikiamasis dalyvis. Indoeuropiečių *dhe-dhǝ-ont- reguliariai vir­to baltų dedant-. Tematinė fleksija ded-a pasidaryta analogiškai pagal šio dalyvio kamieną.

  20. The Development of a Survey Instrument on South Dakota's School District Leadership Climate as Related to Deming's Fourteen Points.

    Science.gov (United States)

    Holmes, Lawrence W. O.; And Others

    Development of an instrument to measure baseline levels of applied Total Quality Management (TQM) practices in South Dakota before the introduction and dissemination of TQM theory to the state's educational leaders is described. Using the interpretation of Deming's 14 points that was developed by J. J. Bonstigl, a 115-item initial item pool was…

  1. The Teaching of Dr. W. E. Deming and the Performance Domains of the National Commission for the Principalship.

    Science.gov (United States)

    House, Jess E.

    This paper considers the total-quality-management teachings of W. E. Deming as a basis for the redesign of educational-administration preparation programs. The performance domains developed by the National Commission for the Principalship (jointly sponsored by the National Association of Secondary School Principals and the National Association of…

  2. Training Quality: Before and after Winning the Deming Prize.

    Science.gov (United States)

    Magennis, Jo P.

    1995-01-01

    Describes the Quality Improvement Program developed by Florida Power and Light's Nuclear Training organization that was awarded the Deming Application Prize for quality control. Training quality, team activities, training's role in business planning, customer involvement and evaluation, and continuous improvement of training are discussed. (LRW)

  3. How Configuration Management Helps Projects Innovate and Communicate

    Science.gov (United States)

    Cioletti, Louis A.; Guidry, Carla F.

    2009-01-01

    This slide presentation reviews the concept of Configuration Management (CM) and compares it to the standard view of Project management (PM). It presents two PM models: (1) Kepner-Tregoe,, and the Deming models, describes why projects fail, and presents methods of how CM helps projects innovate and communicate.

  4. The IAEA neutron coincidence counting (INCC) and the DEMING least-squares fitting programs

    International Nuclear Information System (INIS)

    Krick, M.S.; Harker, W.C.; Rinard, P.M.; Wenz, T.R.; Lewis, W.; Pham, P.; Ridder, P. de

    1998-01-01

    Two computer programs are described: (1) the INCC (IAEA or International Neutron Coincidence Counting) program and (2) the DEMING curve-fitting program. The INCC program is an IAEA version of the Los Alamos NCC (Neutron Coincidence Counting) code. The DEMING program is an upgrade of earlier Windows reg-sign and DOS codes with the same name. The versions described are INCC 3.00 and DEMING 1.11. The INCC and DEMING codes provide inspectors with the software support needed to perform calibration and verification measurements with all of the neutron coincidence counting systems used in IAEA inspections for the nondestructive assay of plutonium and uranium

  5. The Case of Deming, New Mexico: International Public Education. Multicultural Videocase Series.

    Science.gov (United States)

    Herbert, Joanne M., Ed.; McNergney, Robert F., Ed.

    This guide accompanies one of a pair of videocases depicting educational life in Deming, New Mexico. The videocase includes 28 minutes of unstaged but edited videotape footage of teaching and learning in and around junior high and mid-high schools in Deming. The first section of the guide, "Teaching Note" (Todd Kent) contains a…

  6. The Reconciliation of W. Edwards Deming and John Dewey: An Exploration of Similarities in Motivation Theory.

    Science.gov (United States)

    Towns, William C.

    1996-01-01

    Interrogates similarities and misconceptions common to W. Edwards Deming and John Dewey, examining a reconciliation of the two within the context of motivation theory and concluding that Deming and Dewey are very similar in general outlook and the shared belief in the integrity of the individual within the social system. (SM)

  7. Neoglacial fluctuations of Deming Glacier, Mt. Baker, Washington USA.

    Science.gov (United States)

    Osborn, G.; Menounos, B.; Scott, K.; Clague, J. J.; Tucker, D.; Riedel, J.; Davis, P.

    2007-12-01

    Deming Glacier flows from the upper west slopes of Mt. Baker, a stratovolcano in the Cascade Range of Washington, USA. The north and south lateral moraines of Deming Glacier are composed of at least four tills separated by layers of detrital wood and sheared stumps in growth position. The stratigraphy records fluctuations of the glacier during the Holocene. The outer ten rings of an in situ stump from the middle wood layer, which is about 40 m below the north lateral moraine crest and 1.2 km downvalley from the present glacier terminus, yielded an age of 1750 ± 50~~ 14C yr BP [1810-1550 cal yr BP]. The stump revealed at least 300 rings and thus records a period of landscape stability and relatively restricted glaciation for several hundred years prior to ca. 1750 14C yr BP . Samples from the lowest wood layer also have been submitted for radiocarbon dating. Outer rings of detrital wood samples collected from two wood mats exposed in the south lateral moraine, 2.3 km downvalley of the glacier terminus, returned radiocarbon ages of 1600 ± 30~~ 14C yr BP [1550- 1410 cal yr BP] and 430 ± 30~~ 14C yr BP [AD 1420-1620]. These data indicate that Deming Glacier advanced over a vegetated moraine sometime after 1810 cal yr BP to a position less extensive that it achieved at the peak of the Little Ice Age. The glacier then receded before it began its final and most extensive Holocene advance after AD 1420. The older advance is correlative with the 'First Millennium AD' advance, recently recognized throughout western North America. The younger advance coincides with an advance of Mt. Baker's Easton Glacier [AD 1430-1630], and advances of many alpine glaciers elsewhere in western North America. Our data suggest that glaciers on Mt. Baker fluctuated in a similar manner to alpine glaciers in the Coast Mountains of British Columbia and in other mountain ranges of northwest North America during Neoglaciation.

  8. Power manager and method for managing power

    NARCIS (Netherlands)

    Burchard, A.T.; Kersten, G.; Molnos, A.M.; Milutinovic, A.; Goossens, K.G.W.; Steffens, E.F.M.

    2009-01-01

    A power manager (106) and method for managing the power supplied to an electronic device is provided. Furthermore, a system wherein the power supplied to an electronic device is managed is provided. The power manager (106) is operative to monitor a hardware monitor (104) during a monitoring time

  9. Controlling Costs: The 6-3-5 Method - Case Studies at NAVSEA and NATO

    Science.gov (United States)

    2016-04-30

    Deming (1993) once stated, “A bad system will beat a good person every time.” For the branch manager who did not allow “red” stoplight issues to be...CVN 70 Carl Vinson’s mid-life RCOH refueling & maintenance. (2009, July 14). Defense Industry Daily. Deming , W. (1993). Deming four day seminar...in Phoenix, Arizona (via the notes of Mike Stoecklein). The W. Edwards Deming Institute Blog. Retrieved March 1, 2016 from http://blog.deming.org

  10. Management Tools in Engineering Education.

    Science.gov (United States)

    Fehr, M.

    1999-01-01

    Describes a teaching model that applies management tools such as delegation, total quality management, time management, teamwork, and Deming rules. Promotes the advantages of efficiency, reporting, independent scheduling, and quality. (SK)

  11. Estimating Population Parameters using the Structured Serial Coalescent with Bayesian MCMC Inference when some Demes are Hidden

    Directory of Open Access Journals (Sweden)

    Allen Rodrigo

    2006-01-01

    Full Text Available Using the structured serial coalescent with Bayesian MCMC and serial samples, we estimate population size when some demes are not sampled or are hidden, ie ghost demes. It is found that even with the presence of a ghost deme, accurate inference was possible if the parameters are estimated with the true model. However with an incorrect model, estimates were biased and can be positively misleading. We extend these results to the case where there are sequences from the ghost at the last time sample. This case can arise in HIV patients, when some tissue samples and viral sequences only become available after death. When some sequences from the ghost deme are available at the last sampling time, estimation bias is reduced and accurate estimation of parameters associated with the ghost deme is possible despite sampling bias. Migration rates for this case are also shown to be good estimates when migration values are low.

  12. The structured ancestral selection graph and the many-demes limit.

    Science.gov (United States)

    Slade, Paul F; Wakeley, John

    2005-02-01

    We show that the unstructured ancestral selection graph applies to part of the history of a sample from a population structured by restricted migration among subpopulations, or demes. The result holds in the limit as the number of demes tends to infinity with proportionately weak selection, and we have also made the assumptions of island-type migration and that demes are equivalent in size. After an instantaneous sample-size adjustment, this structured ancestral selection graph converges to an unstructured ancestral selection graph with a mutation parameter that depends inversely on the migration rate. In contrast, the selection parameter for the population is independent of the migration rate and is identical to the selection parameter in an unstructured population. We show analytically that estimators of the migration rate, based on pairwise sequence differences, derived under the assumption of neutrality should perform equally well in the presence of weak selection. We also modify an algorithm for simulating genealogies conditional on the frequencies of two selected alleles in a sample. This permits efficient simulation of stronger selection than was previously possible. Using this new algorithm, we simulate gene genealogies under the many-demes ancestral selection graph and identify some situations in which migration has a strong effect on the time to the most recent common ancestor of the sample. We find that a similar effect also increases the sensitivity of the genealogy to selection.

  13. The Art of Chairing: What Deming Taught the Japanese and the Japanese Taught Me.

    Science.gov (United States)

    Rodd, Laurel Rasplica

    2001-01-01

    Reveals how a business model--based on the work of W. Edwards Deming--helped a foreign language department chair become a better leader. Outlines seven principles for department chairs: create constancy of purpose; change and improvement are ongoing; drive out fear; work with suppliers to continually improve the quality of incoming people,…

  14. Quality in Higher Education: Lessons Learned from the Baldrige Award, Deming Prize, and ISO 9000 Registration.

    Science.gov (United States)

    Izadi, Mahyar; And Others

    1996-01-01

    Compares the Baldrige Award, Deming Prize, and ISO 9000 registration in terms of purpose, focus, eligibility, time frame, information sharing, number of recipients, and assessment. Suggests that vocational-technical programs in higher education could be improved using the criteria for these awards. (SK)

  15. Methods of Financial Risk Management

    Directory of Open Access Journals (Sweden)

    Korzh Natalia

    2016-10-01

    Full Text Available The essence and nature of financial risks are investigated. Their classification is conducted. The features of financial risk management and the main methods of management are considered. The ways of risk compensation are identified. It is proved that the objective external risk basis is such market imperfections as externalities of enterprises and incomplete information about the operation of the business environment and internal objective basis risk – the objective function to maximise profits in a competitive environment. It is revealed that to compensate market imperfections business entities should develop a strategy that combines fill in missing information and neutralise or minimise externalities that tactically implemented in financial risk management programs.

  16. ASPECTS OF INTEGRATION MANAGEMENT METHODS

    Directory of Open Access Journals (Sweden)

    Artemy Varshapetian

    2015-10-01

    Full Text Available For manufacturing companies to succeed in today's unstable economic environment, it is necessary to restructure the main components of its activities: designing innovative product, production using modern reconfigurable manufacturing systems, a business model that takes into account the global strategy and management methods using modern management models and tools. The first three components are discussed in numerous publications, for example, (Koren, 2010 and is therefore not considered in the article. A large number of publications devoted to the methods and tools of production management, for example (Halevi, 2007. On the basis of what was said in the article discusses the possibility of the integration of only three methods have received in recent years, the most widely used, namely: Six Sigma method - SS (George et al., 2005 and supplements its-Design for six sigm? - DFSS (Taguchi, 2003; Lean production transformed with the development to the "Lean management" and further to the "Lean thinking" - Lean (Hirano et al., 2006; Theory of Constraints, developed E.Goldratt - TOC (Dettmer, 2001. The article investigates some aspects of this integration: applications in diverse fields, positive features, changes in management structure, etc.

  17. Methods of forming thermal management systems and thermal management methods

    Science.gov (United States)

    Gering, Kevin L.; Haefner, Daryl R.

    2012-06-05

    A thermal management system for a vehicle includes a heat exchanger having a thermal energy storage material provided therein, a first coolant loop thermally coupled to an electrochemical storage device located within the first coolant loop and to the heat exchanger, and a second coolant loop thermally coupled to the heat exchanger. The first and second coolant loops are configured to carry distinct thermal energy transfer media. The thermal management system also includes an interface configured to facilitate transfer of heat generated by an internal combustion engine to the heat exchanger via the second coolant loop in order to selectively deliver the heat to the electrochemical storage device. Thermal management methods are also provided.

  18. A quality improvement management model for renal care.

    Science.gov (United States)

    Vlchek, D L; Day, L M

    1991-04-01

    The purpose of this article is to explore the potential for applying the theory and tools of quality improvement (total quality management) in the renal care setting. We believe that the coupling of the statistical techniques used in the Deming method of quality improvement, with modern approaches to outcome and process analysis, will provide the renal care community with powerful tools, not only for improved quality (i.e., reduced morbidity and mortality), but also for technology evaluation and resource allocation.

  19. Using Total Quality Management Principles To Implement School-Based Management.

    Science.gov (United States)

    Terry, Paul M.

    Those engaged in school restructuring can find direction in the philosophy of W. Edwards Deming, which has guided the operations of many American corporations. This paper provides an overview of Deming's Fourteen Points of Total Quality Management (TQM) and discusses their applications to education. To develop a successful TQM system, the school…

  20. Implications of the Fourteen Points of Total Quality Management (TQM) for Science Education.

    Science.gov (United States)

    Aliff, John Vincent

    The management theories of W. Edwards Deming are known as Total Quality Management (TQM) and advocate building quality into organizational processes rather than analyzing outcomes. Although TQM was originally developed for the workplace, educational reformers have been applying its principles to higher education. The original 14 points of Deming's…

  1. The Quality Improvement Management Approach as Implemented in a Middle School.

    Science.gov (United States)

    Bayless, David L.; And Others

    1992-01-01

    The Total Quality Management Theory of W. E. Deming can be adapted within an educational organization to build structures that support educators' beliefs. A case study of the implementation of Deming principles at the LeRoy Martin Middle School in Raleigh (North Carolina) illustrates the effectiveness of this management approach. (SLD)

  2. A scientific evaluation of an organization and its leadership and administrative prastices: Report of management

    OpenAIRE

    IVANOV, Sergey

    2017-01-01

    Abstract. This article intends provide an evaluation of an organization based on organizational theories, developed largely by W. Edwards Deming, Jerry B. Harvey, and other theorists. Drawing from these theories, the authors apply different methods to conduct an organizational study, evaluating a mid-size organization located in the United States, and make recommendations for improvement to upper management.Keywords. Organizational study, Abilene paradox, Phrog farms, Feararchy, Deming’s dise...

  3. Glass transition behaviour of the quaternary ammonium type ionic liquid, {[DEME][I] + H2O} mixtures

    International Nuclear Information System (INIS)

    Imai, Yusuke; Abe, Hiroshi; Matsumoto, Hitoshi; Shimada, Osamu; Hanasaki, Tomonori; Yoshimura, Yukihiro

    2011-01-01

    By a simple DTA system, the glass transition temperatures of the quaternary ammonium type ionic liquid, {N,N-diethyl-N-methyl-N-(2-methoxyethyl) ammonium iodide, [DEME][I] + H 2 O} mixtures after quick pre-cooling were measured as a function of water concentration (x mol% H 2 O). Results were compared with the previous results of {[DEME][BF 4 ] + H 2 O} mixtures in which double glass transitions were observed in the water concentration region of (16.5 to 30.0) mol% H 2 O. Remarkably, we observed the double glass transition phenomenon in {[DEME][I] + H 2 O} mixtures too, but the two-T g s regions lie towards the water-rich side of (77.5 to 85.0) mol% H 2 O. These clearly reflect the difference in the anionic effect between BF 4 - and I - on the water structure. The end of the glass-formation region of {[DEME][I] + H 2 O} mixtures is around x = 95.0 mol% H 2 O, and this is comparable to that of {[DEME][BF 4 ] + H 2 O} mixtures (x = 96.0 mol% H 2 O).

  4. Managing Productivity and Quality in the 1990s. Some Observations on TIMS (The Institute for Management Sciences) XXIX, 23-26 July 1989, Osaka, Japan

    Science.gov (United States)

    1989-10-01

    often attempted. This profound knowledge must be possessed by management; hence Dr. Deming’s slogan: "Quality is Made in the Boardroom ." Dr. Deming...Out of the Crisis, MIT Center for Advanced Engineering Study, Cambridge, MA, 1982. 5. Lawrence M. Miller, Barbarians to Bureaucrats, Corporate Life

  5. An Introduction to Quality Management: Selected Readings.

    Science.gov (United States)

    total quality management (TQM). Through the kind permission of a number of publishers, we have been able to reproduce here some key articles about...TQM. It is not the intent of this technical note to provide a comprehensive study of quality management , but rather to aid in planning for an...implementation of the Deming approach to TQM. Although the Navy aviation community chose the Deming approach to quality management , as reflected in the selected

  6. Research and Development Advances Impacting Diminishing Manufacturing Sources and Material Shortages Management

    Science.gov (United States)

    2016-06-01

    34 Many total quality management books and processes stress continuous improvement, but Out of the Crisis, by W. Edwards Deming , is probably the...Interoperable Specifications and Standards,” PowerPoint presentation, DMSMS Conference, December 2, 2015. Deming , W. Edwards, Out of the Crisis

  7. Statistical methods for nuclear material management

    Energy Technology Data Exchange (ETDEWEB)

    Bowen W.M.; Bennett, C.A. (eds.)

    1988-12-01

    This book is intended as a reference manual of statistical methodology for nuclear material management practitioners. It describes statistical methods currently or potentially important in nuclear material management, explains the choice of methods for specific applications, and provides examples of practical applications to nuclear material management problems. Together with the accompanying training manual, which contains fully worked out problems keyed to each chapter, this book can also be used as a textbook for courses in statistical methods for nuclear material management. It should provide increased understanding and guidance to help improve the application of statistical methods to nuclear material management problems.

  8. Statistical methods for nuclear material management

    International Nuclear Information System (INIS)

    Bowen, W.M.; Bennett, C.A.

    1988-12-01

    This book is intended as a reference manual of statistical methodology for nuclear material management practitioners. It describes statistical methods currently or potentially important in nuclear material management, explains the choice of methods for specific applications, and provides examples of practical applications to nuclear material management problems. Together with the accompanying training manual, which contains fully worked out problems keyed to each chapter, this book can also be used as a textbook for courses in statistical methods for nuclear material management. It should provide increased understanding and guidance to help improve the application of statistical methods to nuclear material management problems

  9. Management diplomacy: myths and methods.

    Science.gov (United States)

    Pierpaoli, P G

    1987-02-01

    The importance of a manager's ability to tolerate and overcome ambiguity is discussed in relation to achieving excellence in hospital pharmacy management. Health-care programming and policy in the 1980s are shaped largely by financing and increased corporate control; in this environment, hospital pharmacy managers face new definitions of excellence in management. Today's director of pharmacy must be "bilingual" in a sense, since he or she must effectively relate to the hospital's corporate administration on the one hand and the professional staff and patients on the other. The hallmark of excellence in a modern director of pharmacy is the ability to tolerate and overcome ambiguity that arises from both of these sources. Ambiguity may be rooted in issues external to the pharmacy department, including structural or organizational barriers that distort power and authority, the gap between professional values and bureaucratic expectations of behavioral norms, the potential for encroachment on professional boundaries, and the difficulties associated with establishing the effectiveness of clinical pharmaceutical services. Intradepartmental ambiguity may be rooted in structural flaws in departmental organization coupled with inappropriate management styles. If the pharmacy profession is to cope effectively with mounting ambiguity, a theory of clinical systems and practice management will have to be developed. This will require the knowledge, skills, and leadership of "bilingual" directors of pharmacy.

  10. A method and system for power management

    NARCIS (Netherlands)

    Burchard, Arthur Tadeusz; Goossens, Koos Gerard Willen; Milutinovic, A.; Molnos, Anca Mariana; Steffens, Elisabeth Francisca Maria

    2009-01-01

    A method and system for power management is provided. To control power supplied to a second electronic device (106), an electronic system (100) comprises a power management subsystem (110), a first electronic device (102); The power management subsystem (110) monitors the power consumed by the first

  11. Developing a TQM quality management method model

    NARCIS (Netherlands)

    Zhang, Zhihai

    1997-01-01

    From an extensive review of total quality management literature, the external and internal environment affecting an organization's quality performance and the eleven primary elements of TQM are identified. Based on the primary TQM elements, a TQM quality management method model is developed. This

  12. Life cycle management of analytical methods.

    Science.gov (United States)

    Parr, Maria Kristina; Schmidt, Alexander H

    2018-01-05

    In modern process management, the life cycle concept gains more and more importance. It focusses on the total costs of the process from invest to operation and finally retirement. Also for analytical procedures an increasing interest for this concept exists in the recent years. The life cycle of an analytical method consists of design, development, validation (including instrumental qualification, continuous method performance verification and method transfer) and finally retirement of the method. It appears, that also regulatory bodies have increased their awareness on life cycle management for analytical methods. Thus, the International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use (ICH), as well as the United States Pharmacopeial Forum discuss the enrollment of new guidelines that include life cycle management of analytical methods. The US Pharmacopeia (USP) Validation and Verification expert panel already proposed a new General Chapter 〈1220〉 "The Analytical Procedure Lifecycle" for integration into USP. Furthermore, also in the non-regulated environment a growing interest on life cycle management is seen. Quality-by-design based method development results in increased method robustness. Thereby a decreased effort is needed for method performance verification, and post-approval changes as well as minimized risk of method related out-of-specification results. This strongly contributes to reduced costs of the method during its life cycle. Copyright © 2017 Elsevier B.V. All rights reserved.

  13. Pressure-induced change in the Raman spectra of ionic liquid [DEME][BF4]-H2O mixtures

    International Nuclear Information System (INIS)

    Imai, Y; Abe, H; Goto, T; Miyashita, T; Yoshimura, Y

    2010-01-01

    We have measured Raman spectral changes of N,N,diethyl-N-methyl-N-(2-methoxyethyl) ammonium tetrafluoroborate, [DEME][BF 4 ]-H 2 O mixtures under high pressure. All the Raman spectra of mixtures of water concentrations below 50.0 mol% H 2 O changed at around 1 GPa at room temperature. The spectrum at high pressure is completely different from that obtained by cooling the sample at a normal pressure.

  14. Dynamic methods of air traffic flow management

    Directory of Open Access Journals (Sweden)

    Jacek SKORUPSKI

    2011-01-01

    Full Text Available Air traffic management is a complex hierarchical system. Hierarchy levels can be defined according to decision making time horizon or to analyze area volume. For medium time horizon and wide analysis area, the air traffic flow management services were established. Their main task is to properly co-ordinate air traffic in European airspace, so as to minimize delays arising in congested sectors. Those services have to assure high safety level at the same time. Thus it is a very complex task, with many goals, many decision variables and many constraints.In the paper review of the methods developed for aiding air traffic flow management services is presented. More detailed description of a dynamic method is given. This method is based on stochastic capacity and scenario analysis. Some problems in utilization of presented methods are also pointed out, so are the next research possibilities.

  15. Automated Traffic Management System and Method

    Science.gov (United States)

    Glass, Brian J. (Inventor); Spirkovska, Liljana (Inventor); McDermott, William J. (Inventor); Reisman, Ronald J. (Inventor); Gibson, James (Inventor); Iverson, David L. (Inventor)

    2000-01-01

    A data management system and method that enables acquisition, integration, and management of real-time data generated at different rates, by multiple heterogeneous incompatible data sources. The system achieves this functionality by using an expert system to fuse data from a variety of airline, airport operations, ramp control, and air traffic control tower sources, to establish and update reference data values for every aircraft surface operation. The system may be configured as a real-time airport surface traffic management system (TMS) that electronically interconnects air traffic control, airline data, and airport operations data to facilitate information sharing and improve taxi queuing. In the TMS operational mode, empirical data shows substantial benefits in ramp operations for airlines, reducing departure taxi times by about one minute per aircraft in operational use, translating as $12 to $15 million per year savings to airlines at the Atlanta, Georgia airport. The data management system and method may also be used for scheduling the movement of multiple vehicles in other applications, such as marine vessels in harbors and ports, trucks or railroad cars in ports or shipping yards, and railroad cars in switching yards. Finally, the data management system and method may be used for managing containers at a shipping dock, stock on a factory floor or in a warehouse, or as a training tool for improving situational awareness of FAA tower controllers, ramp and airport operators, or commercial airline personnel in airfield surface operations.

  16. Apply Deming's Methods to K-12 Curriculum and Improve Student Achievement

    Science.gov (United States)

    Kelly, Thomas F.

    2008-01-01

    The United States has been engaged in school reform for three decades. The federal government as well as all fifty states have passed numerous versions of reform legislation to mandate and regulate the process. Educators have adjusted their practices to the policy created by this legislation. They have also allocated hundreds of billions of…

  17. Practical Methods for Information Security Risk Management

    Directory of Open Access Journals (Sweden)

    Cristian AMANCEI

    2011-01-01

    Full Text Available The purpose of this paper is to present some directions to perform the risk man-agement for information security. The article follows to practical methods through question-naire that asses the internal control, and through evaluation based on existing controls as part of vulnerability assessment. The methods presented contains all the key elements that concurs in risk management, through the elements proposed for evaluation questionnaire, list of threats, resource classification and evaluation, correlation between risks and controls and residual risk computation.

  18. Risk management method for small photovoltaic plants

    Directory of Open Access Journals (Sweden)

    Kirova Milena

    2016-09-01

    Full Text Available Risk management is necessary for achieving the goals of the organization. There are many methods, approaches, and instruments in the literature concerning risk management. However, these are often highly specialized and transferring them to a different field can prove difficult. Therefore, managers often face situations where they have no tools to use for risk management. This is the case with small photovoltaic plants (according to a definition by the Bulgarian State Energy and Water Regulatory Commission small applies to systems with a total installed power of 200 kWp. There are some good practices in the energy field for minimizing risks, but they offer only partial risk prevention and are not sufficient. Therefore a new risk management method needs to be introduced. Small photovoltaic plants offer plenty of advantages in comparison to the other renewable energy sources which makes risk management in their case more important. There is no classification of risks for the exploitation of small photovoltaic systems in the available literature as well as to what degree the damages from those risks could spread. This makes risk analysis and evaluation necessary for obtaining information which could aid taking decisions for improving risk management. The owner of the invested capital takes a decision regarding the degree of acceptable risk for his organization and it must be protected depending on the goals set. Investors in small photovoltaic systems need to decide to what degree the existing risks can influence the goals previously set, the payback of the investment, and what is the acceptable level of damages for the investor. The purpose of this work is to present a risk management method, which currently does not exist in the Bulgaria, so that the risks and the damages that could occur during the exploitation of small photovoltaic plants could be identified and the investment in such technology – justified.

  19. METHODICAL BASES OF MANAGEMENT OF INSURANCE PORTFOLIO

    Directory of Open Access Journals (Sweden)

    Serdechna Yulia

    2018-01-01

    Full Text Available Introduction. Despite the considerable arsenal of developments in the issues of assessing the management of the insurance portfolio remains unresolved. In order to detail, specify and further systematize the indicators for the indicated evaluation, the publications of scientists are analyzed. The purpose of the study is to analyze existing methods by which it is possible to formulate and manage the insurance portfolio in order to achieve its balance, which will contribute to ensuring the financial reliability of the insurance company. Results. The description of the essence of the concept of “management of insurance portfolio”, as the application of actuarial methods and techniques to the combination of various insurance risks offered for insurance or are already part of the insurance portfolio, allowing to adjust the size and structure of the portfolio in order to ensure its financial stability, achievement the maximum level of income of an insurance organization, preservation of the value of its equity and financial security of insurance liabilities. It is determined that the main methods by which the insurer’s insurance portfolio can be formed and managed is the selection of risks; reinsurance operations that ensure diversification of risks; formation and placement of insurance reserves, which form the financial basis of insurance activities. The method of managing an insurance portfolio, which can be both active and passive, is considered. Conclusions. It is determined that the insurance portfolio is the basis on which all the activities of the insurer are based and which determines its financial stability. The combination of methods and technologies applied to the insurance portfolio is a management method that can be both active and passive and has a number of specific methods through which the insurer’s insurance portfolio can be formed and managed. It is substantiated that each insurance company aims to form an efficient and

  20. Integrated management of thesis using clustering method

    Science.gov (United States)

    Astuti, Indah Fitri; Cahyadi, Dedy

    2017-02-01

    Thesis is one of major requirements for student in pursuing their bachelor degree. In fact, finishing the thesis involves a long process including consultation, writing manuscript, conducting the chosen method, seminar scheduling, searching for references, and appraisal process by the board of mentors and examiners. Unfortunately, most of students find it hard to match all the lecturers' free time to sit together in a seminar room in order to examine the thesis. Therefore, seminar scheduling process should be on the top of priority to be solved. Manual mechanism for this task no longer fulfills the need. People in campus including students, staffs, and lecturers demand a system in which all the stakeholders can interact each other and manage the thesis process without conflicting their timetable. A branch of computer science named Management Information System (MIS) could be a breakthrough in dealing with thesis management. This research conduct a method called clustering to distinguish certain categories using mathematics formulas. A system then be developed along with the method to create a well-managed tool in providing some main facilities such as seminar scheduling, consultation and review process, thesis approval, assessment process, and also a reliable database of thesis. The database plays an important role in present and future purposes.

  1. Methods for Distributed Optimal Energy Management

    DEFF Research Database (Denmark)

    Brehm, Robert

    The presented research deals with the fundamental underlying methods and concepts of how the growing number of distributed generation units based on renewable energy resources and distributed storage devices can be most efficiently integrated into the existing utility grid. In contrast to convent......The presented research deals with the fundamental underlying methods and concepts of how the growing number of distributed generation units based on renewable energy resources and distributed storage devices can be most efficiently integrated into the existing utility grid. In contrast...... to conventional centralised optimal energy flow management systems, here-in, focus is set on how optimal energy management can be achieved in a decentralised distributed architecture such as a multi-agent system. Distributed optimisation methods are introduced, targeting optimisation of energy flow in virtual......-consumption of renewable energy resources in low voltage grids. It can be shown that this method prevents mutual discharging of batteries and prevents peak loads, a supervisory control instance can dictate the level of autarchy from the utility grid. Further it is shown that the problem of optimal energy flow management...

  2. Quantification Methods of Management Skills in Shipping

    Directory of Open Access Journals (Sweden)

    Riana Iren RADU

    2012-04-01

    Full Text Available Romania can not overcome the financial crisis without business growth, without finding opportunities for economic development and without attracting investment into the country. Successful managers find ways to overcome situations of uncertainty. The purpose of this paper is to determine the managerial skills developed by the Romanian fluvial shipping company NAVROM (hereinafter CNFR NAVROM SA, compared with ten other major competitors in the same domain, using financial information of these companies during the years 2005-2010. For carrying out the work it will be used quantification methods of managerial skills to CNFR NAVROM SA Galati, Romania, as example mentioning the analysis of financial performance management based on profitability ratios, net profit margin, suppliers management, turnover.

  3. Empowerment methods and techniques for sport managers

    Directory of Open Access Journals (Sweden)

    THANOS KRIEMADIS

    2006-01-01

    Full Text Available We live in a globalize economic, social and technological environment where organizations can be successful only if they have required resources (material resources, facilities and equipment, and human resources. The managers and the organizations should empower and enable employees to accomplish their work in meaningful ways. Empowerment has been described as a means to enable employees to make decisions and as a personal phenomenon where individuals take responsibility for their own actions. The aim of the present study was to present effective methods and techniques of employee empowerment which constitute for the organization a source of competitive advantage. The paper will present and explain empowerment methods and techniques such as: (a organizational culture, (b vision statements, (c organizational values, (d teamwork, (e the role of manager - leadership, (f devolving responsibility accountability, (g information sharing, (h continuous training, (i appraisal rewards, (j goal setting, and (k performance appraisal process.

  4. Aims and methods of nuclear materials management

    International Nuclear Information System (INIS)

    Leven, D.; Schier, H.

    1979-05-01

    Whilst international safeguarding of fissile materials against abuse has been the subject of extensive debate, little public attention has so far been devoted to the internal security of these materials. All countries using nuclear energy for peaceful purposes have laid down appropriate regulations. In the Federal Republic of Germany safeguards are required, for instance, by the Atomic Energy Act, and are therefore a prerequisite for licensing. The aims and methods of national nuclear materials management are contrasted with viewpoints on international safeguards

  5. Electrochemical analyses of diffusion behaviors and nucleation mechanisms for neodymium complexes in [DEME][TFSA] ionic liquid

    International Nuclear Information System (INIS)

    MATSUMIYA, Masahiko; ISHII, Mai; KAZAMA, Ryo; KAWAKAMI, Satoshi

    2014-01-01

    Highlights: • The cathodic reaction; Nd(III) + 3e − → Nd(0) was observed at −3.30 V in [DEME][TFSA]. • The diffusion coefficient of Nd(III) in [DEME][TFSA] was evaluated from semi-integral analysis. • The nucleation mechanism of Nd nuclei was altered from instantaneous to progressive nucleation. • The number density of Nd nuclei was increased as the overpotential was increased. • The electrodeposits from [DEME][TFSA] were identified Nd metal and oxide mixtures by XPS. - ABSTRACT: The electrochemical and nucleation behavior of Nd(III) in the ammonium-based ionic liquid (IL), N,N-diethyl-N-methyl-N-(2-methoxyethyl) ammonium bis(trifluoromethyl-sulfonyl) amide, [DEME] [TFSA], were investigated in this study. The cathodic reaction of Nd(III) [Nd(III) + 3e − → Nd(0)] was observed at −3.30 V vs. Ag/Ag(I) using cyclic voltammetry at 353 K. The diffusion coefficient of Nd(III) was estimated to be 1.35 ± 0.10 × 10 −13 m 2 s −1 at 353 K using semi-integral and semi-differential analyses. The initial process of Nd electrodeposition was also evaluated by chronoamperometry, indicating that the initial nucleation and growth of Nd on the Pt electrode occurred via instantaneous nucleation at −3.40 V. As the applied potential became more negative, the mechanism changed from instantaneous to progressive nucleation. The number density of Nd nuclei in the initial stage of nucleation decreased as the overpotential increased. Furthermore, the electrodeposition of Nd was carried out under the conditions of −3.40 V and −3.60 V at 353 K. SEM observations of the electrodeposits were consistent with the series of results obtained by chronoamperometry. The electrodeposits consisted mainly of Nd metal and oxide mixtures, whereas bonding with the light elements (C, F, and S) of the IL was suppressed, as demonstrated by EDX and XPS. The results suggested that sufficient dehydration and control of the water content of the electrolyte are important factors

  6. Program Manager’s Handbook

    Science.gov (United States)

    1989-03-01

    risk as early as cess control and process management are prin- possible and before Milestone II. Risk management ciples of the Deming philosophy for...operational concept dXcumcr t and software technical art form. The software development pro- development specifications. 4.16a Figure 1. LIFE CICLE

  7. Reasons and Methods to Learn the Management

    Science.gov (United States)

    Li, Hongxin; Ding, Mengchun

    2010-01-01

    Reasons for learning the management include (1) perfecting the knowledge structure, (2) the management is the base of all organizations, (3) one person may be the manager or the managed person, (4) the management is absolutely not simple knowledge, and (5) the learning of the theoretical knowledge of the management can not be replaced by the…

  8. Quantitative methods for management and economics

    CERN Document Server

    Chakravarty, Pulak

    2009-01-01

    ""Quantitative Methods for Management and Economics"" is specially prepared for the MBA students in India and all over the world. It starts from the basics, such that even a beginner with out much mathematical sophistication can grasp the ideas and then comes forward to more complex and professional problems. Thus, both the ordinary students as well as ""above average: i.e., ""bright and sincere"" students would be benefited equally through this book.Since, most of the problems are solved or hints are given, students can do well within the short duration of the semesters of their busy course.

  9. Comparative study on implementation of management requires from ABNT NBR ISO/IEC 17025

    International Nuclear Information System (INIS)

    Suplino Filho, Carlos Alberto Lucas; Souza, Luciane de Rezende; Oliveira, Estela Maria de

    2014-01-01

    This work was developed in order to emphasize the importance of laboratory management system in the direction and control of the company or institute with regard to the quality of delivery of ionizing radiation service to society. It was developed a comparative study of managerial points of Deming with the managerial requirements of ISO / IEC 17025, which found that the difficulties of the laboratories indicated by nonconformities tracked during audits, are related to specific points cited by Deming. (author)

  10. Teaching methods in the healthcare management major.

    Science.gov (United States)

    Petrova, Gergana G; Popov, Teodor N

    2009-01-01

    Organisation and management are factors of paramount importance in higher education for achieving higher quality of training, better professional adaptation, and more effective career pursuance of the students. The present study analyses the use of various teaching methods for the students in the major of Healthcare Management as they are employed in two medical universities. We conducted a detailed questionnaire survey which included the students in the Healthcare Management major in the Faculty of Public Health (FPH) at Sofia Medical University (SMU) and the Medical Faculty of Plovdiv Medical University (PMU). The students were surveyed for two consecutive academic years (2004/2005 and 2005/2006). The logical units of study were 198 students completing their baccalaureate programs in Healthcare Management: 145 (73.23+/-3.15%) in the FPH, SMU and 53 (26.77+/-3.15%) in the PMU (the greater number of students from the SMU was due to the greater number of students admitted into the Sofia Medical University). The technical units of study were the Faculty of Public Health in the Medical University in Sofia and the Medical faculty in the Medical University in Plovdiv. The survey was carried out using our own questionnaire form comprising 51 questions (open and closed), some of them allowing more than one answer. The collected sociological data were analysed using SPSS v. 13.0, and the diagrams were made using Microsoft Excel' 97. We used the alternative, non-parametric and graphic analyses to illustrate the processes and events at a level of significance P PMU and 26.32+/-1.91% for SMU). This format of teaching is also considered to be the easiest with regard to learning the study material by 22.75+/-3.25% of the PMU graduates and 27.56+/-2.38% of the SMU graduates. The PMU students regard seminars, individual work and discussions as the format that afford the easiest way to acquire knowledge (22.16+/-3.21%, 21.56+/-3.18%, (18.56+/-3.01%, respectively). The most

  11. Methods of process management in radiology

    International Nuclear Information System (INIS)

    Teichgraeber, U.K.M.; Gillessen, C.; Neumann, F.

    2003-01-01

    The main emphasis in health care has been on quality and availability but increasing cost pressure has made cost efficiency ever more relevant for nurses, technicians, and physicians. Within a hospital, the radiologist considerably influences the patient's length of stay through the availability of service and diagnostic information. Therefore, coordinating and timing radiologic examinations become increasingly more important. Physicians are not taught organizational management during their medical education and residency training, and the necessary expertise in economics is generally acquired through the literature or specialized courses. Beyond the medical service, the physicians are increasingly required to optimize their work flow according to economic factors. This review introduces various tools for process management and its application in radiology. By means of simple paper-based methods, the work flow of most processes can be analyzed. For more complex work flow, it is suggested to choose a method that allows for an exact qualitative and quantitative prediction of the effect of variations. This review introduces network planning technique and process simulation. (orig.) [de

  12. Knowledge information management toolkit and method

    Science.gov (United States)

    Hempstead, Antoinette R.; Brown, Kenneth L.

    2006-08-15

    A system is provided for managing user entry and/or modification of knowledge information into a knowledge base file having an integrator support component and a data source access support component. The system includes processing circuitry, memory, a user interface, and a knowledge base toolkit. The memory communicates with the processing circuitry and is configured to store at least one knowledge base. The user interface communicates with the processing circuitry and is configured for user entry and/or modification of knowledge pieces within a knowledge base. The knowledge base toolkit is configured for converting knowledge in at least one knowledge base from a first knowledge base form into a second knowledge base form. A method is also provided.

  13. LED lamp power management system and method

    Science.gov (United States)

    Gaines, James; Clauberg, Bernd; Van Erp, Josephus A. M.

    2013-03-19

    An LED lamp power management system and method including an LED lamp having an LED controller 58; a plurality of LED channels 60 operably connected to the LED controller 58, each of the plurality of LED channels 60 having a channel switch 62 in series with at least one shunted LED circuit 83, the shunted LED circuit 83 having a shunt switch 68 in parallel with an LED source 80. The LED controller 58 reduces power loss in one of the channel switch 62 and the shunt switch 68 when LED lamp electronics power loss (P.sub.loss) exceeds an LED lamp electronics power loss limit (P.sub.lim); and each of the channel switches 62 receives a channel switch control signal 63 from the LED controller 58 and each of the shunt switches 68 receives a shunt switch control signal 69 from the LED controller 58.

  14. Shaping America's Future III: Proceedings of the National Forum on Transforming Our System of Educating Youth with W. Edwards Deming (June 8, 1992).

    Science.gov (United States)

    National Educational Service, Bloomington, IN.

    On June 8, 1992, the presidents of the nation's two largest teachers unions joined the directors and presidents of virtually every educational organization, as well as political leaders and executives from Ford, General Motors, and Chrysler in an effort to redesign U.S. schools using the quality principles of W. Edwards Deming. Panelists spent the…

  15. Space program management methods and tools

    CERN Document Server

    Spagnulo, Marcello; Balduccini, Mauro; Nasini, Federico

    2013-01-01

    Beginning with the basic elements that differentiate space programs from other management challenges, Space Program Management explains through theory and example of real programs from around the world, the philosophical and technical tools needed to successfully manage large, technically complex space programs both in the government and commercial environment. Chapters address both systems and configuration management, the management of risk, estimation, measurement and control of both funding and the program schedule, and the structure of the aerospace industry worldwide.

  16. Total Quality Management and Organizational Behavior Management: An Integration for Continual Improvement.

    Science.gov (United States)

    Mawhinney, Thomas C.

    1992-01-01

    The history and main features of organizational behavior management (OBM) are compared and integrated with those of total quality management (TQM), with emphasis on W.E. Deming's 14 points and OBM's operant-based approach to performance management. Interventions combining OBM, TQM, and statistical process control are recommended. (DB)

  17. Breakthrough Propulsion Physics Project: Project Management Methods

    Science.gov (United States)

    Millis, Marc G.

    2004-01-01

    To leap past the limitations of existing propulsion, the NASA Breakthrough Propulsion Physics (BPP) Project seeks further advancements in physics from which new propulsion methods can eventually be derived. Three visionary breakthroughs are sought: (1) propulsion that requires no propellant, (2) propulsion that circumvents existing speed limits, and (3) breakthrough methods of energy production to power such devices. Because these propulsion goals are presumably far from fruition, a special emphasis is to identify credible research that will make measurable progress toward these goals in the near-term. The management techniques to address this challenge are presented, with a special emphasis on the process used to review, prioritize, and select research tasks. This selection process includes these key features: (a) research tasks are constrained to only address the immediate unknowns, curious effects or critical issues, (b) reliability of assertions is more important than the implications of the assertions, which includes the practice where the reviewers judge credibility rather than feasibility, and (c) total scores are obtained by multiplying the criteria scores rather than by adding. Lessons learned and revisions planned are discussed.

  18. New safety management method at Cominak

    International Nuclear Information System (INIS)

    Kallam, A.

    1993-01-01

    Operations manager Mr. Kallam presents the new safety management system, its implementation and results in this underground uranium mine in northern Niger, where the rate of accidents increased dangerously during the eighties. 3 figs., 3 photos

  19. The Impact of Personality Traits on Conflict Management Methods

    Directory of Open Access Journals (Sweden)

    Muharrem Tuna

    2015-12-01

    Full Text Available It is widely accepted that the personality traits influence the occurrence of conflicts and that the managers have important responsibilities to deal with these conflicts. The subject of this work is to find the relationship between the personal traits of the managers and the conflict management methods that they use. Within this context, a survey was conducted on A group travel agencies and three, four and five star hotels operating in the seven regions of Turkey. Reliability and validity of the scale used to measure the opinions of the 1098 managers has been analyzed and correlation and regression analysis have been conducted. The findings suggest that the managers with dominant, revengeful and cold personal traits employ the management method of domination, that the introvert managers and the managers that can be exploited use the avoidance method and that the altruistic and the extrovert managers employ the accomodation method of conflict management.

  20. Managing Student Affairs Programs: Methods, Models, Muddles.

    Science.gov (United States)

    Deegan, William L.

    Management processes and problems are examined in a variety of student affairs contexts. This book (1) proposes a theoretical framework for the analysis of management functions in colleges and universities, (2) studies the practice of management in several different student affairs contexts to uncover current practices, issues, problems, and…

  1. The Modern Elements of the Management System of the Agrarian Business Enterprises

    Directory of Open Access Journals (Sweden)

    Fostolovych Valentyna A.

    2017-05-01

    Full Text Available The article provides an operation mechanism for the integrated management system that is recommended for the introduction at the enterprises of the agrarian business by means of principles, methods and tools of management system. An example of the modern element of the management system of the agricultural enterprises is the software product Soft.Farm. The article considers improving of the organizational structure of enterprises in the direction of formation of clusters of different forms and active implementing of an integrated management system with wide application of its principles (Deming principles, principle of continuous improvement of processes, zero defects principle, principle of collaboration, methods (teamwork method, quality function deployment (QFD, value analysis, failure modes and effects analysis (FMEA, SKO, SPC and structural elements (flowchart, Ishikawa diagram, Pareto chart, column chart, checklists, and control maps.

  2. Assessment of Navy Contract Management Processes

    Science.gov (United States)

    2016-04-30

    capability? • 85% of quality problems are related to processes, while only 15% of problems are controlled by individual workers ( Deming , 1986...eligible participants: 369 • Total surveys completed: 185 • Response rate: 50% CONTRACT MANAGEMENT MATURITY MODEL© MATURITY LEVEL 5...Measurement – Organizations systematically use performance metrics to measure the quality and evaluate the effectiveness of the contract management

  3. Total Quality Management. ERIC Digest, Number 73.

    Science.gov (United States)

    Weaver, Tyler

    The Japanese success story has made W. Edwards Deming's Total Quality Management (TQM) theory increasingly popular among American managers, from car manufacturers to educational leaders. TQM is based on two tenets: the primacy of customer satisfaction and the necessity of tapping nontraditional sources (especially employee ideas) to institute…

  4. Total Quality Management in Higher Education.

    Science.gov (United States)

    Sherr, Lawrence A.; Lozier, G. Gredgory

    1991-01-01

    Total Quality Management, based on theories of W. Edward Deming and others, is a style of management using continuous process improvement characterized by mission and customer focus, a systematic approach to operations, vigorous development of human resources, long-term thinking, and a commitment to ensuring quality. The values espoused by this…

  5. Professional competence of social workers’: management methods

    Directory of Open Access Journals (Sweden)

    V. V. Dudaryov

    2015-02-01

    Full Text Available In the article the problem of social workers’ professional competence is actualized. It is proved that finding ways to optimize the specialists for social welfare system professional training is in line with common didactic problems of the high school pedagogies. The theoretical analysis of Ukrainian and foreign scientists’ works connected with the aspects of social workers’ professional competence is done. The definition of «competence» and «professional competence» is given. The main components of social workers’ professional competence are defined. These are: motivation (psychological readiness to professional activity; value and semantic (orientation, values, meanings; cognitive and professional (general culture, literacy, vocational education; action and professional (work with people at different social levels, work with information, achievement, etc.; auto­psychological (personal and professional reflection; regulatory (emotional and volitional self­regulation. The general structure and content criteria of social worker’s professional competence are under analysis. The characteristic of innovative forms and methods of social workers’ professional competence management (such as case­study, socio­psychological training is given. The causes for social workers’ successful training in high school are defined. The conclusions of the study are made and promising areas for future studies of the issues related to the subject under consideration are defined.

  6. An Evaluation Method of Equipment Reliability Configuration Management

    Science.gov (United States)

    Wang, Wei; Feng, Weijia; Zhang, Wei; Li, Yuan

    2018-01-01

    At present, many equipment development companies have been aware of the great significance of reliability of the equipment development. But, due to the lack of effective management evaluation method, it is very difficult for the equipment development company to manage its own reliability work. Evaluation method of equipment reliability configuration management is to determine the reliability management capabilities of equipment development company. Reliability is not only designed, but also managed to achieve. This paper evaluates the reliability management capabilities by reliability configuration capability maturity model(RCM-CMM) evaluation method.

  7. Application of NUREG-1150 methods and results to accident management

    International Nuclear Information System (INIS)

    Dingman, S.; Sype, T.; Camp, A.; Maloney, K.

    1991-01-01

    The use of NUREG-1150 and similar probabilistic risk assessments in the Nuclear Regulatory Commission (NRC) and industry risk management programs is discussed. Risk management is more comprehensive than the commonly used term accident management. Accident management includes strategies to prevent vessel breach, mitigate radionuclide releases from the reactor coolant system, and mitigate radionuclide releases to the environment. Risk management also addresses prevention of accident initiators, prevention of core damage, and implementation of effective emergency response procedures. The methods and results produced in NUREG-1150 provide a framework within which current risk management strategies can be evaluated, and future risk management programs can be developed and assessed. Examples of the use of the NUREG-1150 framework for identifying and evaluating risk management options are presented. All phases of risk management are discussed, with particular attention given to the early phases of accidents. Plans and methods for evaluating accident management strategies that have been identified in the NRC accident management program are discussed

  8. Application of NUREG-1150 methods and results to accident management

    International Nuclear Information System (INIS)

    Dingman, S.; Sype, T.; Camp, A.; Maloney, K.

    1990-01-01

    The use of NUREG-1150 and similar Probabilistic Risk Assessments in NRC and industry risk management programs is discussed. ''Risk management'' is more comprehensive than the commonly used term ''accident management.'' Accident management includes strategies to prevent vessel breach, mitigate radionuclide releases from the reactor coolant system, and mitigate radionuclide releases to the environment. Risk management also addresses prevention of accident initiators, prevention of core damage, and implementation of effective emergency response procedures. The methods and results produced in NUREG-1150 provide a framework within which current risk management strategies can be evaluated, and future risk management programs can be developed and assessed. Examples of the use of the NUREG-1150 framework for identifying and evaluating risk management options are presented. All phases of risk management are discussed, with particular attention given to the early phases of accidents. Plans and methods for evaluating accident management strategies that have been identified in the NRC accident management program are discussed. 2 refs., 3 figs

  9. Proposal and Evaluation of Management Method for College Mechatronics Education Applying the Project Management

    Science.gov (United States)

    Ando, Yoshinobu; Eguchi, Yuya; Mizukawa, Makoto

    In this research, we proposed and evaluated a management method of college mechatronics education. We applied the project management to college mechatronics education. We practiced our management method to the seminar “Microcomputer Seminar” for 3rd grade students who belong to Department of Electrical Engineering, Shibaura Institute of Technology. We succeeded in management of Microcomputer Seminar in 2006. We obtained the good evaluation for our management method by means of questionnaire.

  10. Method for Business Process Management System Selection

    NARCIS (Netherlands)

    Thijs van de Westelaken; Bas Terwee; Pascal Ravesteijn

    2013-01-01

    In recent years business process management (BPM) and specifically information systems that support the analysis, design and execution of processes (also called business process management systems (BPMS)) are getting more attention. This has lead to an increase in research on BPM and BPMS. However

  11. Safety and Waste Management for SAM Chemistry Methods

    Science.gov (United States)

    The General Safety and Waste Management page offers section-specific safety and waste management details for the chemical analytes included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

  12. Safety and Waste Management for SAM Pathogen Methods

    Science.gov (United States)

    The General Safety and Waste Management page offers section-specific safety and waste management details for the pathogens included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

  13. Safety and Waste Management for SAM Radiochemical Methods

    Science.gov (United States)

    The General Safety and Waste Management page offers section-specific safety and waste management details for the radiochemical analytes included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

  14. Safety and Waste Management for SAM Biotoxin Methods

    Science.gov (United States)

    The General Safety and Waste Management page offers section-specific safety and waste management details for the biotoxins included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

  15. Method for Business Process Management System Selection

    OpenAIRE

    Westelaken, van de, Thijs; Terwee, Bas; Ravesteijn, Pascal

    2013-01-01

    In recent years business process management (BPM) and specifically information systems that support the analysis, design and execution of processes (also called business process management systems (BPMS)) are getting more attention. This has lead to an increase in research on BPM and BPMS. However the research on BPMS is mostly focused on the architecture of the system and how to implement such systems. How to select a BPM system that fits the strategy and goals of a specific organization is ...

  16. Credit Institutions Management Evaluation using Quantitative Methods

    Directory of Open Access Journals (Sweden)

    Nicolae Dardac

    2006-02-01

    Full Text Available Credit institutions supervising mission by state authorities is mostly assimilated with systemic risk prevention. In present, the mission is orientated on analyzing the risk profile of the credit institutions, the mechanism and existing systems as management tools providing to bank rules the proper instruments to avoid and control specific bank risks. Rating systems are sophisticated measurement instruments which are capable to assure the above objectives, such as success in banking risk management. The management quality is one of the most important elements from the set of variables used in the quoting process in credit operations. Evaluation of this quality is – generally speaking – fundamented on quantitative appreciations which can induce subjectivism and heterogeneity in quotation. The problem can be solved by using, complementary, quantitative technics such us DEA (Data Envelopment Analysis.

  17. Methodical ecologization principles in construction management

    OpenAIRE

    Nuzhina Irina Pavlovna; Yudakhina Olga Borisovna

    2015-01-01

    In the article the subject of ecologization of construction sector is presented, the necessity of ecologization technology and technological processes is proved. The article also presents principles of ecologically friendly management of construction and investment activities and describes these principles in detail.

  18. PHARMACEUTICAL MANAGEMENT AND METHODS OF INNOVATIVE ENTREPRENEURSHIP

    Directory of Open Access Journals (Sweden)

    E. V. Omelchenko

    2010-01-01

    Full Text Available Activities of small business in the field of pharmaceutical sales including spread of drugs through pharmacy sales widely debated in recent professional publications are discussed. The theme is very relevant today for both medical professionals and top managers of entities engaged in the sale.

  19. Outcomes-Balanced Framework for Emergency Management: A Predictive Model for Preparedness

    Science.gov (United States)

    2013-09-01

    Management Total Quality Management (TQM) was developed by W. Edwards Deming in the post-World War II reconstruction period in Japan. It ushered in a...FIGURES Figure 1. From Total Quality Management Principles ....................................................30 Figure 2. Outcomes Logic Model (After...THIRA Threat and Hazard Identification and Risk Assessment TQM Total Quality Management UTL Universal Task List xiv ACKNOWLEDGMENTS German

  20. THE MANAGEMENT METHODS IN PERFORMANCE SPORTS

    Directory of Open Access Journals (Sweden)

    Silvia GRĂDINARU

    2015-12-01

    Full Text Available Sports are a widespread phenomenon, capable of raising human energies and mobilize financial and material resources that can be difficult compared with those in other areas of social life. Management of sports organizations is influenced and determined by the compliance and requirements arising from the documents issued by international organizations with authority in the field. Organizational development is considered essentially as a strategy to increase organizational effectiveness by determining changes that consider both human resources and organizations. On the whole society, it is accelerated by an industry evolving sport with distinctive features. Its development is conditional on macroeconomics and technology. The complexity of the activities of sports organizations performance, the main laboratory performance national and international sports, requiring a more thorough investigation to enable knowledge of the complex mechanisms of their management and simultaneously identify some optimization solutions throughout the economic-financial and human resources.

  1. System and method for advanced power management

    Science.gov (United States)

    Atcitty, Stanley [Albuquerque, NM; Symons, Philip C [Surprise, AZ; Butler, Paul C [Albuquerque, NM; Corey, Garth P [Albuquerque, NM

    2009-07-28

    A power management system is provided that includes a power supply means comprising a plurality of power supply strings, a testing means operably connected to said plurality of power supply strings for evaluating performance characteristics of said plurality of power supply strings, and a control means for monitoring power requirements and comprising a switching means for controlling switching of said plurality of power supply strings to said testing means.

  2. Methodical approach to financial stimulation of logistics managers

    OpenAIRE

    Melnykova Kateryna V.

    2014-01-01

    The article offers a methodical approach to financial stimulation of logistics managers, which allows calculation of the incentive amount with consideration of profit obtained from introduction of optimisation logistics solutions. The author generalises measures, which would allow increase of stimulation of labour of logistics managers by the enterprise top managers. The article marks out motivation factors, which exert influence upon relation of logistics managers to execution of optimisatio...

  3. Applying a life cycle approach to project management methods

    OpenAIRE

    Biggins, David; Trollsund, F.; Høiby, A.L.

    2016-01-01

    Project management is increasingly important to organisations because projects are the method\\ud by which organisations respond to their environment. A key element within project management\\ud is the standards and methods that are used to control and conduct projects, collectively known as\\ud project management methods (PMMs) and exemplified by PRINCE2, the Project Management\\ud Institute’s and the Association for Project Management’s Bodies of Knowledge (PMBOK and\\ud APMBOK. The purpose of t...

  4. Management systems, control and motivation methods used at enterprises groups

    OpenAIRE

    Leugaudaitė, Dalia

    2017-01-01

    MANAGEMENT SYSTEMS, CONTROL AND MOTIVATION METHODS USED AT ENTERPRISES GROUPS 69 pages, 3 tables, 25 pictures, 39 literature references. The aim of the Master's paper is to determine the implementation impact of the motivation and controlling methods to achieve efficiency in management systems. As a result of the scientific literature analysis, the advantages and disadvantages of the management systems were selected. These statements were used for the primary survey of the initial group of co...

  5. The Methods of Stress Management and Their Classification

    Directory of Open Access Journals (Sweden)

    Honchar Mykhailo F.

    2017-12-01

    Full Text Available The article considers the content and classification of methods of stress management, which provides systematization of their varieties by the number of existing (character, time interval of application, direction of impact, period of action, way of account the interests of employees, level of formation, method of substantiation, content and the allocated new attributes (scale of changes in terms of stress management systems, level of novelty at enterprise, consistency, which allows to choose the appropriate types of such methods in overcoming undesirable deviations that have a significant negative impact on the functioning of economic entities. It has been determined that such methods are formed in the implementing of technology of stress-management; are the result of management activities of the steering subsystem of organization at each level of management; have alternative nature; form an information-management base for the adoption of managerial decisions in terms of the systems of stress administration. It has been specified that, with the assistance of certain methods in terms of stress management systems, managers can track existing and potential problems in the complex and dynamic environment of the organization, identify their relationships, identify «weak signals», adjust goals and tasks of management of critical undesirable deviations, determine indicators and criteria of stress-management, etc.

  6. Total Quality Management: Implications for Educational Assessment.

    Science.gov (United States)

    Rankin, Stuart C.

    1992-01-01

    Deming's "System of Profound Knowledge" is even more fundamental than his 14-principle system transformation guide and is based on 4 elements: systems theory, statistical variation, a theory of knowledge, and psychology. Management should revamp total system processes so that quality of product is continually improved. Implications for…

  7. Staff Development and Total Quality Management.

    Science.gov (United States)

    Norris, Gerald L.; Norris, Joye H.

    Professional development is an emerging view of faculty development that places teachers in charge of their own professional growth. The emergence of Total Quality Management (TQM) provides a vehicle for designing professional development to meet the needs of individuals and the organizations that employ them. The eight tenets of Deming's theory…

  8. Curriculum Transformation through Total Quality Management.

    Science.gov (United States)

    Edwards, Barbara; Algozzine, Bob

    1995-01-01

    Describes a massive cultural transformation project at two Charlotte, North Carolina, elementary schools that used Deming's total quality management principles to restructure curricula according to Boyer's eight commonalities of learning. Shows how the FADE (focus, analyze, develop, and execute) model was used to develop a well-coordinated,…

  9. Budgetary Approach to Project Management by Percentage of Completion Method

    Directory of Open Access Journals (Sweden)

    Leszek Borowiec

    2011-07-01

    Full Text Available Efficient and effective project management process is made possible by the use of methods and techniques of project management. The aim of this paper is to present the problems of project management by using Percentage of Completion method. The research material was gathered based on the experience in implementing this method by the Johnson Controls International Company. The article attempts to demonstrate the validity of the thesis that the POC project management method, allows for effective implementation and monitoring of the project and thus is an effective tool in the managing of companies which exploit the budgetary approach. The study presents planning process of basic parameters affecting the effectiveness of the project (such as costs, revenue, margin and characterized how the primary measurements used to evaluate it. The present theme is illustrating by numerous examples for showing the essence of the raised problems and the results are presenting by using descriptive methods, graphical and tabular.

  10. Method of assessing severe accident management strategies

    International Nuclear Information System (INIS)

    Kastenberg, W.E.; Apostolakis, G.; Dhir, V.K.; Okrent, D.; Jae, M.; Lim, H.; Milici, T.; Park, H.; Swider, J.; Xing, L.; Yu, D.

    1991-01-01

    Accident management can be defined as the innovative use of existing and or alternative resources, systems, and actions to prevent or mitigate a severe accident. A significant number of probabilistic safety assessments (PSAs) have been completed that yield the principal plant vulnerabilities. These vulnerabilities can be categorized as (1) dominant sequences with respect to core-melt frequency. (2) dominant sequences with respect to various risk measures. (3) dominant threats that challenge safety functions. (4) dominant threats with respect to failure of safety systems. For each sequence/threat and each combination of strategy, there may be several options available to the operator. Each strategy/option involves phenomenological and operational considerations regarding uncertainty. These considerations include uncertainties in key phenomena, operator behavior, system availability and behavior, and available information. This paper presents a methodology for assessing severe accident management strategies given the key uncertainties delineated at two workshops held at the University of California, Los Angeles. Based on decision trees and influence diagrams, the methodology is currently being applied to two case studies: cavity flooding in a pressurized water reactor (PWR) to prevent vessel penetration or failure, and drywell flooding in a boiling water reactor to prevent vessel and/or containment failure

  11. DOE methods for evaluating environmental and waste management samples

    International Nuclear Information System (INIS)

    Goheen, S.C.; McCulloch, M.; Thomas, B.L.; Riley, R.G.; Sklarew, D.S.; Mong, G.M.; Fadeff, S.K.

    1993-03-01

    DOE Methods for Evaluating Environmental and Waste Management Samples (DOE Methods) provides applicable methods in use by. the US Department of Energy (DOE) laboratories for sampling and analyzing constituents of waste and environmental samples. The development of DOE Methods is supported by the Laboratory Management Division (LMD) of the DOE. This document contains chapters and methods that are proposed for use in evaluating components of DOE environmental and waste management samples. DOE Methods is a resource intended to support sampling and analytical activities that will aid in defining the type and breadth of contamination and thus determine the extent of environmental restoration or waste management actions needed, as defined by the DOE, the US Environmental Protection Agency (EPA), or others

  12. DOE methods for evaluating environmental and waste management samples.

    Energy Technology Data Exchange (ETDEWEB)

    Goheen, S C; McCulloch, M; Thomas, B L; Riley, R G; Sklarew, D S; Mong, G M; Fadeff, S K [eds.; Pacific Northwest Lab., Richland, WA (United States)

    1994-04-01

    DOE Methods for Evaluating Environmental and Waste Management Samples (DOE Methods) provides applicable methods in use by. the US Department of Energy (DOE) laboratories for sampling and analyzing constituents of waste and environmental samples. The development of DOE Methods is supported by the Laboratory Management Division (LMD) of the DOE. This document contains chapters and methods that are proposed for use in evaluating components of DOE environmental and waste management samples. DOE Methods is a resource intended to support sampling and analytical activities that will aid in defining the type and breadth of contamination and thus determine the extent of environmental restoration or waste management actions needed, as defined by the DOE, the US Environmental Protection Agency (EPA), or others.

  13. Modern methods of managing changes in enterprises

    Directory of Open Access Journals (Sweden)

    Alkarawy H.G.W.

    2018-05-01

    Full Text Available in order to maintain their positions in the market, enterprises are forced to look for new opportunities and ways to rationalize their actions. One such option is the company's outsourcing, which is the subject of this article. Outsourcing is a direction that was founded almost three decades ago, but still enjoys increased attention due to its approaches to considering the resources and performance of organizations. Under the influence of globalization, which we can now observe in all aspects of production, as well as the opening of markets and economies, outsourcing cannot be ignored by the management of the enterprise. Nevertheless, the gap between theory and real practice still exists. Therefore, the purpose of this study is to develop an algorithm for introducing outsourcing into the practical activities of the enterprise.

  14. Modern Methods for Cost Management in Construction Enterprises

    Directory of Open Access Journals (Sweden)

    Mesároš Peter

    2015-06-01

    Full Text Available Cost management should be seen as an essential function of enterprises which perform their activities in current market environment. One of the main factors affecting the level of achieved profit and favourable market position is cost structure. The company's ability to obtain necessary and reliable information on their own cost, subsequent processing and effective cost management is crucial for achieving success. This study focuses on cost management and the use of modern methods of cost management in construction enterprises. The aim of this paper is to identify approaches to cost management in Slovak construction enterprises, based on own empirical research.

  15. Efficient Load Scheduling Method For Power Management

    Directory of Open Access Journals (Sweden)

    Vijo M Joy

    2015-08-01

    Full Text Available An efficient load scheduling method to meet varying power supply needs is presented in this paper. At peak load times the power generation system fails due to its instability. Traditionally we use load shedding process. In load shedding process disconnect the unnecessary and extra loads. The proposed method overcomes this problem by scheduling the load based on the requirement. Artificial neural networks are used for this optimal load scheduling process. For generate economic scheduling artificial neural network has been used because generation of power from each source is economically different. In this the total load required is the inputs of this network and the power generation from each source and power losses at the time of transmission are the output of the neural network. Training and programming of the artificial neural networks are done using MATLAB.

  16. Comparative study on implementation of management requires from ABNT NBR ISO/IEC 17025; Estudo comparativo de implementacao de requisitos gerenciais da ABNT NBR ISO/TEC 17025 e boas praticas de gestao em laboratorios de calibracao da area de radiacoes ionizantes

    Energy Technology Data Exchange (ETDEWEB)

    Suplino Filho, Carlos Alberto Lucas; Souza, Luciane de Rezende; Oliveira, Estela Maria de, E-mail: clucas@ird.gov.br, E-mail: rluciane@ird.gov.br, E-mail: estela@ird.gov.br [Instituto de Radioprotecao e Dosimetria, (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

    2014-07-01

    This work was developed in order to emphasize the importance of laboratory management system in the direction and control of the company or institute with regard to the quality of delivery of ionizing radiation service to society. It was developed a comparative study of managerial points of Deming with the managerial requirements of ISO / IEC 17025, which found that the difficulties of the laboratories indicated by nonconformities tracked during audits, are related to specific points cited by Deming. (author)

  17. Entrepreneur environment management behavior evaluation method derived from environmental economy.

    Science.gov (United States)

    Zhang, Lili; Hou, Xilin; Xi, Fengru

    2013-12-01

    Evaluation system can encourage and guide entrepreneurs, and impel them to perform well in environment management. An evaluation method based on advantage structure is established. It is used to analyze entrepreneur environment management behavior in China. Entrepreneur environment management behavior evaluation index system is constructed based on empirical research. Evaluation method of entrepreneurs is put forward, from the point of objective programming-theory to alert entrepreneurs concerned to think much of it, which means to take minimized objective function as comprehensive evaluation result and identify disadvantage structure pattern. Application research shows that overall behavior of Chinese entrepreneurs environmental management are good, specially, environment strategic behavior are best, environmental management behavior are second, cultural behavior ranks last. Application results show the efficiency and feasibility of this method. Copyright © 2013 The Research Centre for Eco-Environmental Sciences, Chinese Academy of Sciences. Published by Elsevier B.V. All rights reserved.

  18. Combining AHP and DEA Methods for Selecting a Project Manager

    Directory of Open Access Journals (Sweden)

    Baruch Keren

    2014-07-01

    Full Text Available A project manager has a major influence on the success or failure of the project. A good project manager can match between the strategy and objectives of the organization and the goals of the project. Therefore, the selection of the appropriate project manager is a key factor for the success of the project. A potential project manager is judged by his or her proven performance and personal qualifications. This paper proposes a method to calculate the weighted scores and the full rank of candidates for managing a project, and to select the best of those candidates. The proposed method combines specific methodologies: the Data Envelopment Analysis (DEA and the Analytical Hierarchical Process (AHP and uses DEA Ranking Methods to enhance selection.

  19. Methods of measuring the effectiveness of Lean Management

    Directory of Open Access Journals (Sweden)

    Marcel Lizak

    2016-12-01

    Full Text Available Invalid organisation of the production environment in an enterprise is the cause of many disruptions during the implementation of production processes. Lean Management is aimed at improving processes and eliminating interference in accordance with the Kaizen principle. A significant element of management constantly analyses and measures the improved results. The article presents the results of the literature research from the scope of observation methods and measuring the effects of the use of Lean Management instruments in manufacturing companies.

  20. Clustering Methods Application for Customer Segmentation to Manage Advertisement Campaign

    OpenAIRE

    Maciej Kutera; Mirosława Lasek

    2010-01-01

    Clustering methods are recently so advanced elaborated algorithms for large collection data analysis that they have been already included today to data mining methods. Clustering methods are nowadays larger and larger group of methods, very quickly evolving and having more and more various applications. In the article, our research concerning usefulness of clustering methods in customer segmentation to manage advertisement campaign is presented. We introduce results obtained by using four sel...

  1. Game Methods of Collective Decision Making in Management Consulting.

    Science.gov (United States)

    Prigozhin, Arkadii Il'ich

    1991-01-01

    Explores former Soviet management consultants' increased use of social psychological game methods. Identifies such games as means of involving segments of client organizations in accomplishing shared tasks. Proposes a "practical" business game, designed to shape the process of formulating new management decisions at a radical level.…

  2. Defining collaborative business rules management solutions : framework and method

    NARCIS (Netherlands)

    dr. Martijn Zoet; Johan Versendaal

    2014-01-01

    From the publishers' website: The goal of this research is to define a method for configuring a collaborative business rules management solution from a value proposition perspective. In an earlier published study (Business rules management solutions: added value by means of business

  3. The contemporary art of cost management methods during product development

    NARCIS (Netherlands)

    Wouters, M.; Morales, S.; Epstein, M.J.; Lee, J.Y.

    2014-01-01

    Purpose To provide an overview of research published in the management accounting literature on methods for cost management in new product development, such as a target costing, life cycle costing, component commonality, and modular design. Methodology/approach The structured literature search

  4. Dynamic Subsidy Method for Congestion Management in Distribution Networks

    DEFF Research Database (Denmark)

    Huang, Shaojun; Wu, Qiuwei

    2016-01-01

    Dynamic subsidy (DS) is a locational price paid by the distribution system operator (DSO) to its customers in order to shift energy consumption to designated hours and nodes. It is promising for demand side management and congestion management. This paper proposes a new DS method for congestion...... management in distribution networks, including the market mechanism, the mathematical formulation through a two-level optimization, and the method solving the optimization by tightening the constraints and linearization. Case studies were conducted with a one node system and the Bus 4 distribution network...... of the Roy Billinton Test System (RBTS) with high penetration of electric vehicles (EVs) and heat pumps (HPs). The case studies demonstrate the efficacy of the DS method for congestion management in distribution networks. Studies in this paper show that the DS method offers the customers a fair opportunity...

  5. Methods of multicriterion estimations in system total quality management

    Directory of Open Access Journals (Sweden)

    Nikolay V. Diligenskiy

    2011-05-01

    Full Text Available In this article the method of multicriterion comparative estimation of efficiency (Data Envelopment Analysis and possibility of its application in system of total quality management is considered.

  6. Load management in electrical networks. Objectives, methods, prospects

    International Nuclear Information System (INIS)

    Gabioud, D.

    2008-01-01

    This illustrated article takes up the problems related to the variation of the load in electricity networks. How to handle the peak load? Different solutions in the energy demand management are discussed. Method based on the price, method based on the reduction of the load by electric utilities. Information systems are presented which gives the consumer the needed data to participate in the local load management.

  7. Radiochemistry methods in DOE methods for evaluating environmental and waste management samples

    International Nuclear Information System (INIS)

    Fadeff, S.K.; Goheen, S.C.

    1994-08-01

    Current standard sources of radiochemistry methods are often inappropriate for use in evaluating US Department of Energy environmental and waste management (DOE/EW) samples. Examples of current sources include EPA, ASTM, Standard Methods for the Examination of Water and Wastewater and HASL-300. Applicability of these methods is limited to specific matrices (usually water), radiation levels (usually environmental levels), and analytes (limited number). Radiochemistry methods in DOE Methods for Evaluating Environmental and Waste Management Samples (DOE Methods) attempt to fill the applicability gap that exists between standard methods and those needed for DOE/EM activities. The Radiochemistry chapter in DOE Methods includes an ''analysis and reporting'' guidance section as well as radiochemistry methods. A basis for identifying the DOE/EM radiochemistry needs is discussed. Within this needs framework, the applicability of standard methods and targeted new methods is identified. Sources of new methods (consolidated methods from DOE laboratories and submissions from individuals) and the methods review process will be discussed. The processes involved in generating consolidated methods add editing individually submitted methods will be compared. DOE Methods is a living document and continues to expand by adding various kinds of methods. Radiochemistry methods are highlighted in this paper. DOE Methods is intended to be a resource for methods applicable to DOE/EM problems. Although it is intended to support DOE, the guidance and methods are not necessarily exclusive to DOE. The document is available at no cost through the Laboratory Management Division of DOE, Office of Technology Development

  8. How Agile Methods Inspire Project Management - The Half Double Initiative

    DEFF Research Database (Denmark)

    Heeager, Lise Tordrup; Svejvig, Per; Schlichter, Bjarne Rerup

    Increased complexity in projects has forced new project management initiatives. In software development several agile methods have emerged and are today highly implemented in practice. Observations of general project management practice show how it has been inspired by agile software development......, but very little research addresses the issue of agile project management. In order to understand and to provide suggestions for future practice on how agility can be incorporated in general project management, this paper provides an analysis which compares ten characteristics of agile software development...... (identified in theory) and the Half Double Methodology developed by the Danish Project Half Double initiative; a Methodology developed with practitioners and tested in seven Danish case companies. The analysis shows how the general project management to a great extent has been inspired by agile methods...

  9. Methodical approach to financial stimulation of logistics managers

    Directory of Open Access Journals (Sweden)

    Melnykova Kateryna V.

    2014-01-01

    Full Text Available The article offers a methodical approach to financial stimulation of logistics managers, which allows calculation of the incentive amount with consideration of profit obtained from introduction of optimisation logistics solutions. The author generalises measures, which would allow increase of stimulation of labour of logistics managers by the enterprise top managers. The article marks out motivation factors, which exert influence upon relation of logistics managers to execution of optimisation logistical solutions, which minimise logistical costs. The author builds a scale of financial encouragement for introduction of optimisation logistical solutions proposed by logistics managers. This scale is basic for functioning of the encouragement system and influences the increase of efficiency of logistics managers operation and also optimisation of enterprise logistical solutions.

  10. Construction techniques and management methods for BWR plants

    International Nuclear Information System (INIS)

    Shimizu, Yohji; Tateishi, Mizuo; Hayashi, Yoshishige

    1989-01-01

    Toshiba is constantly striving for safer and more efficient plant construction to realize high-quality BWR plants within a short construction period. To achieve these aims, Toshiba has developed and improved a large number of construction techniques and construction management methods. In the area of installation, various techniques have been applied such as the modularization of piping and equipment, shop installation of reactor internals, etc. Further, installation management has been upgraded by the use of pre-installation review programs, the development of installation control systems, etc. For commissioning, improvements in commissioning management have been achieved through the use of computer systems, and testing methods have also been upgraded by the development of computer systems for the recording and analysis of test data and the automatic adjustment of controllers in the main control system of the BWR. This paper outlines these construction techniques and management methods. (author)

  11. DOE methods for evaluating environmental and waste management samples

    International Nuclear Information System (INIS)

    Goheen, S.C.; McCulloch, M.; Thomas, B.L.; Riley, R.G.; Sklarew, D.S.; Mong, G.M.; Fadeff, S.K.

    1994-04-01

    DOE Methods for Evaluating Environmental and Waste Management Samples (DOE Methods) is a resource intended to support sampling and analytical activities for the evaluation of environmental and waste management samples from U.S. Department of Energy (DOE) sites. DOE Methods is the result of extensive cooperation from all DOE analytical laboratories. All of these laboratories have contributed key information and provided technical reviews as well as significant moral support leading to the success of this document. DOE Methods is designed to encompass methods for collecting representative samples and for determining the radioisotope activity and organic and inorganic composition of a sample. These determinations will aid in defining the type and breadth of contamination and thus determine the extent of environmental restoration or waste management actions needed, as defined by the DOE, the U.S. Environmental Protection Agency, or others. The development of DOE Methods is supported by the Laboratory Management Division of the DOE. Methods are prepared for entry into DOE Methods as chapter editors, together with DOE and other participants in this program, identify analytical and sampling method needs. Unique methods or methods consolidated from similar procedures in the DOE Procedures Database are selected for potential inclusion in this document. Initial selection is based largely on DOE needs and procedure applicability and completeness. Methods appearing in this document are one of two types. open-quotes Draftclose quotes or open-quotes Verified.close quotes. open-quotes Draftclose quotes methods that have been reviewed internally and show potential for eventual verification are included in this document, but they have not been reviewed externally, and their precision and bias may not be known. open-quotes Verifiedclose quotes methods in DOE Methods have been reviewed by volunteers from various DOE sites and private corporations

  12. PRACTICAL METHODS OF BANKING MANAGEMENT – APPLICATION IN PRACTICE

    Directory of Open Access Journals (Sweden)

    Bodretskiy M.

    2018-03-01

    Full Text Available Introduction. The article presents the latest trends in the development of banking management in Ukraine. Purpose. The research is aimed at the study of practical methods of banking institutions management in Ukraine. Results. The results of the research, which prove the determination by most banks of such management methods based on the principles of minimizing operating costs of a banking institution, are proved. The main areas of such a minimization, most banks identified: the involvement of inexperienced staff, increase the level of automation of banking processes, increasing attention to non-price methods of attracting customers. A classification of non-price methods of attracting customers is made. The use of mathematical tools for determining the quality of management by a banking institution is proposed. The article states that in order to prevent the manifestations of crisis phenomena in a banking institution (predictors of which may be: the emergence of a negative spread, loss-making activity of the bank, etc. it is necessary to have an optimal, economically sound portfolio of practical management methods that can be practically useful for execution on operational and tactical level of managerial decisions of banking management. The article contains the results of the survey of specialists and scientists who took part in the scientific and practical conference “Anti-crisis management of economy and finances”, held in 2017. The main areas of work of the mentioned conference were: search of ways of overcoming of crisis phenomena in economy and finances of Ukraine; definition of strategic aspects of the development of the financial system of the state in the context of the growth of the negative consequences of the growth of tension in international and economic relations; definition of fiscal policy of Ukraine and the impact of its quality on the quality of the banking system in the conditions of stagnation of financial markets, etc

  13. Methods and techniques of nuclear in-core fuel management

    International Nuclear Information System (INIS)

    Jong, A.J. de.

    1992-04-01

    Review of methods of nuclear in-core fuel management (the minimal critical mass problem, minimal power peaking) and calculational techniques: reactorphysical calculations (point reactivity models, continuous refueling, empirical methods, depletion perturbation theory, nodal computer programs); optimization techniques (stochastic search, linear programming, heuristic parameter optimization). (orig./HP)

  14. A Situational Implementation Method for Business Process Management Systems

    NARCIS (Netherlands)

    R.L. Jansen; J.P.P. Ravensteyn

    For the integrated implementation of Business Process Management and supporting information systems many methods are available. Most of these methods, however, apply a one-size fits all approach and do not take into account the specific situation of the organization in which an information system is

  15. Land management planning: a method of evaluating alternatives

    Science.gov (United States)

    Andres Weintraub; Richard Adams; Linda Yellin

    1982-01-01

    A method is described for developing and evaluating alternatives in land management planning. A structured set of 15 steps provides a framework for such an evaluation. when multiple objectives and uncertainty must be considered in the planning process. The method is consistent with other processes used in organizational evaluation, and allows for the interaction of...

  16. An Analytical Method for Measuring Competence in Project Management

    Science.gov (United States)

    González-Marcos, Ana; Alba-Elías, Fernando; Ordieres-Meré, Joaquín

    2016-01-01

    The goal of this paper is to present a competence assessment method in project management that is based on participants' performance and value creation. It seeks to close an existing gap in competence assessment in higher education. The proposed method relies on information and communication technology (ICT) tools and combines Project Management…

  17. LABOR MOTIVATION AND STIMULATION AS ORGANIZATIONAL BEHAVIOR MANAGEMENT METHOD

    Directory of Open Access Journals (Sweden)

    R. D. Tregoubova

    2012-01-01

    Full Text Available Main organizational behavior management methods are material incentives, wages, rewards, participation in profits. Motivation andstimulation concepts are specified, components of the mechanism of forming the system of personnel stimulus and motives are discussed along with organization personnel motivation and stimulation forms and methods.

  18. The evolution of credit risk: phenomena, methods and management

    OpenAIRE

    George A. Christodoulakis

    2007-01-01

    This paper summarizes the proceedings of a conference at the Bank of Greece on credit risk. The papers presented focused on innovations in risk management methods which contribute to systemic financial stability, calculation of capital adequacy in financial institutions as well as the validation of credit rating methods in the context of Basel II.

  19. Methods and tools for innovation management procuring enterprises

    OpenAIRE

    A. V. Bogomolov

    2013-01-01

    The traditional methods of quality control of grain, dock-led feasibility, proposed and tested in practice near-mill elevator innovative methods of management organization, introduction of resource-saving technologies, different allow using «piezo electronic sensor» more quickly and accurately detect early damage of grain of wheat and ensure its further storage without loss of quality are described.

  20. A Review of Distributed Parameter Groundwater Management Modeling Methods

    Science.gov (United States)

    Gorelick, Steven M.

    1983-04-01

    Models which solve the governing groundwater flow or solute transport equations in conjunction with optimization techniques, such as linear and quadratic programing, are powerful aquifer management tools. Groundwater management models fall in two general categories: hydraulics or policy evaluation and water allocation. Groundwater hydraulic management models enable the determination of optimal locations and pumping rates of numerous wells under a variety of restrictions placed upon local drawdown, hydraulic gradients, and water production targets. Groundwater policy evaluation and allocation models can be used to study the influence upon regional groundwater use of institutional policies such as taxes and quotas. Furthermore, fairly complex groundwater-surface water allocation problems can be handled using system decomposition and multilevel optimization. Experience from the few real world applications of groundwater optimization-management techniques is summarized. Classified separately are methods for groundwater quality management aimed at optimal waste disposal in the subsurface. This classification is composed of steady state and transient management models that determine disposal patterns in such a way that water quality is protected at supply locations. Classes of research missing from the literature are groundwater quality management models involving nonlinear constraints, models which join groundwater hydraulic and quality simulations with political-economic management considerations, and management models that include parameter uncertainty.

  1. Projected oriented organizations as development of enterprise management methods

    Directory of Open Access Journals (Sweden)

    S.I. Pavlova

    2016-12-01

    Full Text Available Dynamic external environment, significant shortage of product life cycle, increase of product technological difficulty, extension of innovative knowledge motivates managers to look for and use in their activities keys that will provide constant, stable development of organizational structures. The methodology of project enterprise management meets the requirements of «preservation through development». The articles researches the integration of methods and procedures of project management into the enterprise management system. Project management philosophy is the efficient way of existence in the competitive environment and the means for internal development of a company. The author conducts an analysis, determines the essence and peculiarities of a project-oriented enterprise, performs comparing characteristics of functional and project management, describes the stages of gradual transformation of an enterprise organizational structure into a project-oriented one. It is defined that a project-oriented enterprise is that one which functions on the base of innovative development and are scientific, creative and widely use the project activity as the means of a steady development. The article describes internal and external instruments of project management, base knowledge systems on project management and possibilities of enterprises on audit of state of system project management in an enterprise according to the IPMA certification program on the territory of Ukraine.

  2. Transforming Education through Total Quality Management: A Practitioner's Guide.

    Science.gov (United States)

    Schargel, Franklin P.

    This book illustrates how one school, George Westinghouse Vocational and Technical High School (Brooklyn, New York), has been applying the techniques of total quality management (TQM) to achieve educational change. Following the foreword and introduction, chapter 1 describes TQM, Deming's 14 points, and the challenges of applying TQM to education.…

  3. Total Quality Management: Empirical, Conceptual, and Practical Issues.

    Science.gov (United States)

    Hackman, J. Richard; Wageman, Ruth

    1995-01-01

    Total quality management (TQM) has become a U.S. social movement. This commentary analyzes the writings of W. Edwards Deming, Joseph Juran, and Kaoru Ishikawa to assess TQM's coherence, distinctiveness, and likely perseverance. Rhetoric is winning over substance, unrelated interventions are being herded under the TQM banner, and research is not…

  4. TQ What?: Applying Total Quality Management to Child Care.

    Science.gov (United States)

    Hewes, Dorothy

    1994-01-01

    Discusses the concept of Total Quality Management (TQM), developed by W. Edward Deming and Joseph Juran in 1940s, and its applications for child care centers. Discusses how TQM focuses on customer satisfaction, measuring performance, benchmarking, employee empowerment, and continuous training. Includes a list of suggested readings on TQM. (MDM)

  5. TQM in Rural Education: Managing Schools from a Business Perspective.

    Science.gov (United States)

    Nelson, William

    1994-01-01

    Outlines the 14 points of Deming's business philosophy of Total Quality Management in terms of rural education, including adoption of a common mission, movement from mass inspection (standardized testing) to individualized assessment, constant system improvement, training for those involved in the process, improved communication, employee rewards…

  6. Strategic Management of Quality: An American and British Perspective.

    Science.gov (United States)

    Weller, L. David; McElwee, Gerard

    1997-01-01

    Total Quality Management is being implemented in American and British schools to improve educational outcomes. The 14 points of Deming's quality model and Porter's models of competition and drivers of cost provide a systematic, structured template to promote educational excellence and meet the demands of social, political, and economic forces.…

  7. Recently, several critical accounts of marine fish- eries management ...

    African Journals Online (AJOL)

    spamer

    possible prediction of population trends through links that operate at the .... and on an overfishing definition that has been charac- .... sampling and analyses should be stratified by demes when estimating the metapopulation age structure. .... The optimal approach to management depends upon objectives which may vary.

  8. Human resource training and development. The outdoor management method.

    OpenAIRE

    THANOS KRIEMADIS; ANNA KOURTESOPOULOU

    2008-01-01

    In the age of international competition in today’s economy, companies must train their employees and prepare them for jobs in the future. There are many different types and educational approaches in human resource training, but the present study will focus on the Outdoor Management Development (OMD). For better understanding, the particular training method and the core stages of the training process will be examined and the definitions of OMD as an educational tool for management development ...

  9. Clustering Methods Application for Customer Segmentation to Manage Advertisement Campaign

    Directory of Open Access Journals (Sweden)

    Maciej Kutera

    2010-10-01

    Full Text Available Clustering methods are recently so advanced elaborated algorithms for large collection data analysis that they have been already included today to data mining methods. Clustering methods are nowadays larger and larger group of methods, very quickly evolving and having more and more various applications. In the article, our research concerning usefulness of clustering methods in customer segmentation to manage advertisement campaign is presented. We introduce results obtained by using four selected methods which have been chosen because their peculiarities suggested their applicability to our purposes. One of the analyzed method k-means clustering with random selected initial cluster seeds gave very good results in customer segmentation to manage advertisement campaign and these results were presented in details in the article. In contrast one of the methods (hierarchical average linkage was found useless in customer segmentation. Further investigations concerning benefits of clustering methods in customer segmentation to manage advertisement campaign is worth continuing, particularly that finding solutions in this field can give measurable profits for marketing activity.

  10. Modern leadership and management methods for development organizations

    Directory of Open Access Journals (Sweden)

    Samosudova Natalia V.

    2017-01-01

    Full Text Available The following article represents an overview of the basic theoretical concepts of leadership and management in the framework of the organization. The main scientific approaches to leadership are described in conjunction with various leadership styles and their correlation with different levels of effectiveness as a result of the organization’s activity. Certain characteristics applicable to leaders and managers are mentioned. Attitude and obligations of a modern construction project manager are discussed, along with the challenges the construction industry represents these days. Ideas about methods of complex analysis for further research and identifying leadership tactics and their impact on the success of the development organization are suggested.

  11. Using Quality Management as a Bridge in Educating for Sustainability in a Business School

    Science.gov (United States)

    Rusinko, Cathy A.

    2005-01-01

    Purpose: To demonstrate how quality management (QM), a widely accepted management paradigm, can be used to advance education for sustainability in the business curriculum. Design/methodology/approach: The assumptions of QM and environmental sustainability are explored. A class exercise is developed that uses QM tools--and in particular, Deming's…

  12. IMPLEMENTING THE 5S METHOD IN THE PRODUCTION SYSTEM OF DACIA & RENAULT

    Directory of Open Access Journals (Sweden)

    Marin CIOBANU

    2014-11-01

    Full Text Available The aim of this paper is to demonstrate the usefulness of the 5S method in addressing the issues of continuous improvement of productivity and quality of work. There are presented the 5 steps, techniques and the adjacent tools. Solutions implemented in the production system Dacia & Renault are indicated. This article provides a practical framework. The 5S method follows the Deming PDCA cycle which constitutes the starting point of the SDCA cycle of continuous improvement of the company's activities in order to obtain excellence. The implementing time of the method depends on the resources and materials allocated. Deployment of 5S is achieved by a scheme of "3+2": the first 3S are tangible and immediate actions, the last 2S appeal to specific management actions. The efficacy of their own workplace in total autonomy creates comfort in the work environment and gives personal benefits to workers.

  13. New knowledge network evaluation method for design rationale management

    Science.gov (United States)

    Jing, Shikai; Zhan, Hongfei; Liu, Jihong; Wang, Kuan; Jiang, Hao; Zhou, Jingtao

    2015-01-01

    Current design rationale (DR) systems have not demonstrated the value of the approach in practice since little attention is put to the evaluation method of DR knowledge. To systematize knowledge management process for future computer-aided DR applications, a prerequisite is to provide the measure for the DR knowledge. In this paper, a new knowledge network evaluation method for DR management is presented. The method characterizes the DR knowledge value from four perspectives, namely, the design rationale structure scale, association knowledge and reasoning ability, degree of design justification support and degree of knowledge representation conciseness. The DR knowledge comprehensive value is also measured by the proposed method. To validate the proposed method, different style of DR knowledge network and the performance of the proposed measure are discussed. The evaluation method has been applied in two realistic design cases and compared with the structural measures. The research proposes the DR knowledge evaluation method which can provide object metric and selection basis for the DR knowledge reuse during the product design process. In addition, the method is proved to be more effective guidance and support for the application and management of DR knowledge.

  14. The physicochemical properties of a [DEME][TFSI] ionic liquid-based electrolyte and their influence on the performance of lithium–sulfur batteries

    International Nuclear Information System (INIS)

    Drvarič Talian, Sara; Bešter-Rogač, Marija; Dominko, Robert

    2017-01-01

    Electrolyte choice is an important decision on the quest for higher-energy batteries. Besides general guidelines on the required properties of an electrolyte suitable for use in lithium–sulfur batteries, the influence of more specific physicochemical properties on its characteristics is not well understood. For this purpose, binary mixtures based on the [DEME][TFSI] and dioxolane electrolyte system for lithium–sulfur batteries was investigated in this work. Selected physicochemical properties were determined for different mixtures of solvents and lithium salt concentrations. All the electrolytes prepared were also tested in the lithium–sulfur battery system. The capacity, Coulombic efficiency, overpotentials and impedance spectra were analyzed and a connection between them and the determined electrolyte properties elucidated. We show that the electrolyte's conductivity does not have a direct connection to any of the battery system properties measured. The highest specific capacities were obtained with batteries compromising 1.0 M LiTFSI and the highest ratio of dioxolane in the binary solvent mixture. On the other hand, the best Coulombic efficiencies were obtained with batteries having high ratios of ionic liquid. Resistance and overpotential are connected parameters and are a function of the ionic liquid content. None of the monitored parameters prevail, since the best electrochemical performance in terms of specific capacity and stability was obtained with the 1.0 M LiTFSI in X[DEME][TFSI] = 0.199 electrolyte.

  15. DOE methods for evaluating environmental and waste management samples

    International Nuclear Information System (INIS)

    Goheen, S.C.; McCulloch, M.; Thomas, B.L.; Riley, R.G.; Sklarew, D.S.; Mong, G.M.; Fadeff, S.K.

    1994-10-01

    DOE Methods for Evaluating Environmental and Waste Management Samples (DOE Methods) is a resource intended to support sampling and analytical activities for the evaluation of environmental and waste management samples from U.S. Department of Energy (DOE) sites. DOE Methods is the result of extensive cooperation from all DOE analytical laboratories. All of these laboratories have contributed key information and provided technical reviews as well as significant moral support leading to the success of this document. DOE Methods is designed to encompass methods for collecting representative samples and for determining the radioisotope activity and organic and inorganic composition of a sample. These determinations will aid in defining the type and breadth of contamination and thus determine the extent of environmental restoration or waste management actions needed, as defined by the DOE, the U.S. Environmental Protection Agency, or others. The development of DOE Methods is supported by the Analytical Services Division of DOE. Unique methods or methods consolidated from similar procedures in the DOE Procedures Database are selected for potential inclusion in this document. Initial selection is based largely on DOE needs and procedure applicability and completeness. Methods appearing in this document are one of two types, open-quotes Draftclose quotes or open-quotes Verifiedclose quotes. open-quotes Draftclose quotes methods that have been reviewed internally and show potential for eventual verification are included in this document, but they have not been reviewed externally, and their precision and bias may not be known. open-quotes Verifiedclose quotes methods in DOE Methods have been reviewed by volunteers from various DOE sites and private corporations. These methods have delineated measures of precision and accuracy

  16. DOE methods for evaluating environmental and waste management samples

    Energy Technology Data Exchange (ETDEWEB)

    Goheen, S.C.; McCulloch, M.; Thomas, B.L.; Riley, R.G.; Sklarew, D.S.; Mong, G.M.; Fadeff, S.K. [eds.

    1994-10-01

    DOE Methods for Evaluating Environmental and Waste Management Samples (DOE Methods) is a resource intended to support sampling and analytical activities for the evaluation of environmental and waste management samples from U.S. Department of Energy (DOE) sites. DOE Methods is the result of extensive cooperation from all DOE analytical laboratories. All of these laboratories have contributed key information and provided technical reviews as well as significant moral support leading to the success of this document. DOE Methods is designed to encompass methods for collecting representative samples and for determining the radioisotope activity and organic and inorganic composition of a sample. These determinations will aid in defining the type and breadth of contamination and thus determine the extent of environmental restoration or waste management actions needed, as defined by the DOE, the U.S. Environmental Protection Agency, or others. The development of DOE Methods is supported by the Analytical Services Division of DOE. Unique methods or methods consolidated from similar procedures in the DOE Procedures Database are selected for potential inclusion in this document. Initial selection is based largely on DOE needs and procedure applicability and completeness. Methods appearing in this document are one of two types, {open_quotes}Draft{close_quotes} or {open_quotes}Verified{close_quotes}. {open_quotes}Draft{close_quotes} methods that have been reviewed internally and show potential for eventual verification are included in this document, but they have not been reviewed externally, and their precision and bias may not be known. {open_quotes}Verified{close_quotes} methods in DOE Methods have been reviewed by volunteers from various DOE sites and private corporations. These methods have delineated measures of precision and accuracy.

  17. A discrete optimization method for nuclear fuel management

    International Nuclear Information System (INIS)

    Argaud, J.P.

    1993-01-01

    Nuclear fuel management can be seen as a large discrete optimization problem under constraints, and optimization methods on such problems are numerically costly. After an introduction of the main aspects of nuclear fuel management, this paper presents a new way to treat the combinatorial problem by using information included in the gradient of optimized cost function. A new search process idea is to choose, by direct observation of the gradient, the more interesting changes in fuel loading patterns. An example is then developed to illustrate an operating mode of the method. Finally, connections with classical simulated annealing and genetic algorithms are described as an attempt to improve search processes. 16 refs., 2 figs

  18. Practical methods for exposure control/management at nuclear facilities

    International Nuclear Information System (INIS)

    Twiggs, J.A.

    1991-01-01

    Exposure management/reduction is very important to Duke Power Company. Practical exposure control/reduction techniques applied to their reactor vessel head disassembly outage activity have consistently reduced personnel exposure for this task. The following exposure control methods have worked for use and will be the industry's direction for the 1990's. A summary of these methods includes: (a) move the responsibility of exposure management from the Radiation Protection group to the Maintenance group; (b) reduce area source term by removal of source; (c) improve working environments in radiation areas by minimizing protective clothing usage; and (d) maximize the use of electronic instruments to allow remote monitoring

  19. Development of Methods of Innovative Projects’ Management in Developer Organizations

    Directory of Open Access Journals (Sweden)

    Papelniuk Oksana

    2017-01-01

    Full Text Available In article the author studies the conceptual scheme of life cycle of innovative developer project and offers methods of innovative projects' management according to the stages of its lifecycle. The author describes algorithm of the organization of management system of innovative projects in the developer organization representing set of stages and methods. The offered algorithm allows developer organizations achieve one of the main of their objectives, which is the creation of a special environment of comfortable accommodation with the emphasis on ecological compatibility and energy efficiency.

  20. Reliability methods in nuclear power plant ageing management

    International Nuclear Information System (INIS)

    Simola, K.

    1999-01-01

    The aim of nuclear power plant ageing management is to maintain an adequate safety level throughout the lifetime of the plant. In ageing studies, the reliability of components, systems and structures is evaluated taking into account the possible time-dependent degradation. The phases of ageing analyses are generally the identification of critical components, identification and evaluation of ageing effects, and development of mitigation methods. This thesis focuses on the use of reliability methods and analyses of plant- specific operating experience in nuclear power plant ageing studies. The presented applications and method development have been related to nuclear power plants, but many of the approaches can also be applied outside the nuclear industry. The thesis consists of a summary and seven publications. The summary provides an overview of ageing management and discusses the role of reliability methods in ageing analyses. In the publications, practical applications and method development are described in more detail. The application areas at component and system level are motor-operated valves and protection automation systems, for which experience-based ageing analyses have been demonstrated. Furthermore, Bayesian ageing models for repairable components have been developed, and the management of ageing by improving maintenance practices is discussed. Recommendations for improvement of plant information management in order to facilitate ageing analyses are also given. The evaluation and mitigation of ageing effects on structural components is addressed by promoting the use of probabilistic modelling of crack growth, and developing models for evaluation of the reliability of inspection results. (orig.)

  1. Reliability methods in nuclear power plant ageing management

    Energy Technology Data Exchange (ETDEWEB)

    Simola, K. [VTT Automation, Espoo (Finland). Industrial Automation

    1999-07-01

    The aim of nuclear power plant ageing management is to maintain an adequate safety level throughout the lifetime of the plant. In ageing studies, the reliability of components, systems and structures is evaluated taking into account the possible time-dependent degradation. The phases of ageing analyses are generally the identification of critical components, identification and evaluation of ageing effects, and development of mitigation methods. This thesis focuses on the use of reliability methods and analyses of plant- specific operating experience in nuclear power plant ageing studies. The presented applications and method development have been related to nuclear power plants, but many of the approaches can also be applied outside the nuclear industry. The thesis consists of a summary and seven publications. The summary provides an overview of ageing management and discusses the role of reliability methods in ageing analyses. In the publications, practical applications and method development are described in more detail. The application areas at component and system level are motor-operated valves and protection automation systems, for which experience-based ageing analyses have been demonstrated. Furthermore, Bayesian ageing models for repairable components have been developed, and the management of ageing by improving maintenance practices is discussed. Recommendations for improvement of plant information management in order to facilitate ageing analyses are also given. The evaluation and mitigation of ageing effects on structural components is addressed by promoting the use of probabilistic modelling of crack growth, and developing models for evaluation of the reliability of inspection results. (orig.)

  2. Congestion management of electric distribution networks through market based methods

    DEFF Research Database (Denmark)

    Huang, Shaojun

     EVs and HPs. Market-based congestion management methods are the focus of the thesis. They handle the potential congestion at the energy planning stage; therefore, the aggregators can optimally plan the energy consumption and have the least impact on the customers. After reviewing and identifying...... the shortcomings of the existing methods, the thesis fully studies and improves the dynamic tariff (DT) method, and proposes two  new market-based  congestion management methods,  namely the  dynamic subsidy (DS) method and the flexible demand swap method. The thesis improves the DT method from four aspects......Rapidly increasing share of intermittent renewable energy production poses a great challenge of the management and operation of the modern power systems. Deployment of a large number of flexible demands, such as electrical vehicles (EVs) and heat pumps (HPs), is believed to be a promising solution...

  3. APPLICATION OF QUALITY ECONOMY METHODS IN MANAGING INNOVATION CAPACITY DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    V. V. Okrepilov

    2017-01-01

    Full Text Available Purpose: to reveal the possibilities of applying the methods of the quality economy to improve the management efficiency of the development of the region's innovative potential.Results: in the article topical questions of development of innovative potential of the region are considered - one of the important factors providing improvement of quality of life of the population and sustainable development of the territory. The content of the concept of "innovation potential of the region" is disclosed and its components are described. The purposes of development of innovative potential are considered. A comparative analysis of the methods of managing the development of potential in the market and planned economy is carried out. Particular attention is paid to the application of quality management methods to improve management effectiveness. In conclusion, the advantages and disadvantages of the economy of the macro-region "North-West" from the point of view of transition to an innovative development path, as well as scenarios for the development of the economy, are discussed.Conclusions and relevance: the use of quality economy tools to manage the development of innovative capacity will help to avoid mistakes and choose the right directions for development. In the era of globalization, improving quality is a prerequisite for successful competition in world markets. Therefore, the issues of innovation capacity assessment should be taken into account in the development of regional plans and programs, as well as socio-economic policy.

  4. Quantitative Methods in Supply Chain Management Models and Algorithms

    CERN Document Server

    Christou, Ioannis T

    2012-01-01

    Quantitative Methods in Supply Chain Management presents some of the most important methods and tools available for modeling and solving problems arising in the context of supply chain management. In the context of this book, “solving problems” usually means designing efficient algorithms for obtaining high-quality solutions. The first chapter is an extensive optimization review covering continuous unconstrained and constrained linear and nonlinear optimization algorithms, as well as dynamic programming and discrete optimization exact methods and heuristics. The second chapter presents time-series forecasting methods together with prediction market techniques for demand forecasting of new products and services. The third chapter details models and algorithms for planning and scheduling with an emphasis on production planning and personnel scheduling. The fourth chapter presents deterministic and stochastic models for inventory control with a detailed analysis on periodic review systems and algorithmic dev...

  5. A PBOM configuration and management method based on templates

    Science.gov (United States)

    Guo, Kai; Qiao, Lihong; Qie, Yifan

    2018-03-01

    The design of Process Bill of Materials (PBOM) holds a hinge position in the process of product development. The requirements of PBOM configuration design and management for complex products are analysed in this paper, which include the reuse technique of configuration procedure and urgent management need of huge quantity of product family PBOM data. Based on the analysis, the function framework of PBOM configuration and management has been established. Configuration templates and modules are defined in the framework to support the customization and the reuse of configuration process. The configuration process of a detection sensor PBOM is shown as an illustration case in the end. The rapid and agile PBOM configuration and management can be achieved utilizing template-based method, which has a vital significance to improve the development efficiency for complex products.

  6. Methods of assessment and management of enterprise risks

    Directory of Open Access Journals (Sweden)

    I. A. Kiseleva

    2017-01-01

    Full Text Available The article is devoted to the actual topic of our time – the management of business risks. An integral part of professional risk management is to identify the nature of the object of management in the sphere of economy. Since the domestic theory of risk management is under development, the problem of a clear comprehensive definition of risk becomes now of particular relevance. The article discusses the basic concepts of risk management; studied its components in the business activities; reflected system and risk management principles; The basic types of risks in business. A organizational and economic mechanism of enterprise risk assessment. Practical advice on risk management. Entrepreneurship without risk does not exist. With the development of market economy the specific entrepreneur determines the methods that will work, and they all lead to entrepreneurial risks. The level of threats on the market today, above the level of potential profits. It is concluded that it is impossible to increase revenue without increasing the risk or reduce risk without reducing income. The lower range of the probability distribution of expected returns relative to its mean value, the lower the risk associated with this operation. Avoid risk in business is almost impossible, but you can reduce this risk. And it depends on how professionally and correctly operates the entrepreneur, what kind of strategy he will choose to reduce the appearance of risk.

  7. Water Loss Management: Tools and Methods for Developing Countries

    OpenAIRE

    Mutikanga, H.E.

    2012-01-01

    Water utilities in developing countries are struggling to provide customers with a reliable level of service due to their peculiar water distribution characteristics including poorly zoned networks with irregular supply operating under restricted budgets. These unique conditions demand unique tools and methods for water loss control. Water loss management: Tools and Methods for Developing Countries provide a decision support toolbox (appropriate tools and methodologies) for assessing, quantif...

  8. Review of dynamic optimization methods in renewable natural resource management

    Science.gov (United States)

    Williams, B.K.

    1989-01-01

    In recent years, the applications of dynamic optimization procedures in natural resource management have proliferated. A systematic review of these applications is given in terms of a number of optimization methodologies and natural resource systems. The applicability of the methods to renewable natural resource systems are compared in terms of system complexity, system size, and precision of the optimal solutions. Recommendations are made concerning the appropriate methods for certain kinds of biological resource problems.

  9. Methods and tools for innovation management procuring enterprises

    Directory of Open Access Journals (Sweden)

    A. V. Bogomolov

    2013-01-01

    Full Text Available The traditional methods of quality control of grain, dock-led feasibility, proposed and tested in practice near-mill elevator innovative methods of management organization, introduction of resource-saving technologies, different allow using «piezo electronic sensor» more quickly and accurately detect early damage of grain of wheat and ensure its further storage without loss of quality are described.

  10. A proactive method for safety management in nuclear facilities

    International Nuclear Information System (INIS)

    Grecco, Claudio Henrique dos Santos; Carvalho, Paulo Victor Rodrigues de; Santos, Isaac Antonio Luquetti dos

    2014-01-01

    Due to the modern approach to address the safety of nuclear facilities which highlights that these organizations must be able to assess and proactively manage their activities becomes increasingly important the need for instruments to evaluate working conditions. In this context, this work presents a proactive method of managing organizational safety, which has three innovative features: 1) the use of predictive indicators that provide current information on the performance of activities, allowing preventive actions and not just reactive in safety management, different from safety indicators traditionally used (reactive indicators) that are obtained after the occurrence of undesired events; 2) the adoption of resilience engineering approach in the development of indicators - indicators are based on six principles of resilience engineering: top management commitment, learning, flexibility, awareness, culture of justice and preparation for the problems; 3) the adoption of the concepts and properties of fuzzy set theory to deal with subjectivity and consistency of human trials in the evaluation of the indicators. The fuzzy theory is used primarily to map qualitative models of decision-making, and inaccurate representation methods. The results of this study aim an improvement in performance and safety in organizations. The method was applied in a radiopharmaceutical shipping sector of a nuclear facility. The results showed that the method is a good monitoring tool objectively and proactively of the working conditions of an organizational domain

  11. APPLICATION OF CHEMICAL METHODS TO THE SOLID WASTE MANAGEMENT

    Directory of Open Access Journals (Sweden)

    C. P. Bulimaga

    2008-12-01

    Full Text Available The present article is a synthesis analysis of application of chemical methods for the development of technologies of hazardous waste management. Here are offered some technologies of neutralization of the waste containing hexacyanofferates, galvanic wastes and those with contain of vanadium, which are collected at Power Thermoelectric Plants.

  12. Objective, Way and Method of Faculty Management Based on Ergonomics

    Science.gov (United States)

    WANG, Hong-bin; Liu, Yu-hua

    2008-01-01

    The core problem that influences educational quality of talents in colleges and universities is the faculty management. Without advanced faculty, it is difficult to cultivate excellent talents. With regard to some problems in present faculty construction of colleges and universities, this paper puts forward the new objectives, ways and methods of…

  13. TEACHING METHODS IN MBA AND LIFELONG LEARNING PROGRAMMES FOR MANAGERS

    Directory of Open Access Journals (Sweden)

    Jarošová, Eva

    2017-09-01

    Full Text Available Teaching methods in MBA and Lifelong Learning Programmes (LLP for managers should be topically relevant in terms of content as well as the teaching methods used. In terms of the content, the integral part of MBA and Lifelong Learning Programmes for managers should be the development of participants’ leadership competencies and their understanding of current leadership concepts. The teaching methods in educational programmes for managers as adult learners should correspond to the strategy of learner-centred teaching that focuses on the participants’ learning process and their active involvement in class. The focus on the participants’ learning process also raises questions about whether the programme’s participants perceive the teaching methods used as useful and relevant for their development as leaders. The paper presents the results of the analysis of the responses to these questions in a sample of 54 Czech participants in the MBA programme and of lifelong learning programmes at the University of Economics, Prague. The data was acquired based on written or electronically submitted questionnaires. The data was analysed in relation to the usefulness of the teaching methods for understanding the concepts of leadership, leadership skills development as well as respondents’ personal growth. The results show that the respondents most valued the methods that enabled them to get feedback, activated them throughout the programme and got them involved in discussions with others in class. Implications for managerial education practices are discussed.

  14. Radiochemistry methods in DOE Methods for Evaluating Environmental and Waste Management Samples: Addressing new challenges

    International Nuclear Information System (INIS)

    Fadeff, S.K.; Goheen, S.C.; Riley, R.G.

    1994-01-01

    Radiochemistry methods in Department of Energy Methods for Evaluating Environmental and Waste Management Samples (DOE Methods) add to the repertoire of other standard methods in support of U.S. Department of Energy environmental restoration and waste management (DOE/EM) radiochemical characterization activities. Current standard sources of radiochemistry methods are not always applicable for evaluating DOE/EM samples. Examples of current sources include those provided by the US Environmental Protection Agency, the American Society for Testing and Materials, Standard Methods for the Examination of Water and Wastewater, and Environmental Measurements Laboratory Procedures Manual (HASL-300). The applicability of these methods is generally limited to specific matrices (usually water), low-level radioactive samples, and a limited number of analytes. DOE Methods complements these current standard methods by addressing the complexities of EM characterization needs. The process for determining DOE/EM radiochemistry characterization needs is discussed. In this context of DOE/EM needs, the applicability of other sources of standard radiochemistry methods is defined, and gaps in methodology are identified. Current methods in DOE Methods and the EM characterization needs they address are discussed. Sources of new methods and the methods incorporation process are discussed. The means for individuals to participate in (1) identification of DOE/EM needs, (2) the methods incorporation process, and (3) submission of new methods are identified

  15. Procedure for implementing the system of quality management in the testing laboratory of the Center for Genetic Engineering and Biotechnology in Sancti Spiritus.

    Directory of Open Access Journals (Sweden)

    Lídice Peraza Cruz

    2014-03-01

    Full Text Available Implementation of Quality Management System in testing laboratories offers the possibility of its accreditation and a frame for cooperation with other organizations, supporting information and experience exchange, as well as standards and procedures harmonization. To improve the performance of the Center for Genetic Engineering and Biotechnology of Sancti Spíritus testing laboratory, assuring technically valid data and results which promote technical competence and credibility of in vitro diagnostics and biological reagents products, a procedure was designed to implement a Quality Management System. This procedure applies Deming´s Quality Cycle and considers all relevant requirements in NC ISO/IEC 17025:2006 “General requirements for the competence of testing and calibration laboratories” and Regulation No. 20 2004 “Good Manufacturing Practices for in vitro Diagnostics” of Center for State Control of Drugs, Equipment and Medical Devices. We recommend an auto evaluation method, designed by authors, to verify quality management system accomplishment.

  16. Requirements for Participative Management as a Source of Sustainable Competitive Advantage and Tipical Management Method

    Directory of Open Access Journals (Sweden)

    Muscalu Emanoil

    2015-12-01

    Full Text Available The economic context in the recent years has undergone major changes in modern methods and techniques used in management. The current competitive environment is characterized by permanent turbulences influencing firstly the managerial act itself. Out of the many methods and techniques applied so far, some turn out to be less adaptable to the current economic and social context.

  17. Hospital quality: a product of good management as much as good treatment.

    Science.gov (United States)

    Hyde, Andy; Frafjord, Anders

    2013-01-01

    In Norway, as in most countries, the demands placed on hospitals to reduce costs and improve the quality of services are intense. Although many say that improving quality reduces costs, few can prove it. Futhermore, how many people can show that improving quality improves patient satisfaction. Diakonhjemmet hospital in Norway has designed and implemented a hospital management system based on lean principles and the PDCA (Plan-Do-Check-Act) quality circle introduced by WE Deming (Deming 2000). The results are quite impressive with improvements in quality and patient satisfaction. The hospital also runs at a profit.

  18. Teaching organization theory for healthcare management: three applied learning methods.

    Science.gov (United States)

    Olden, Peter C

    2006-01-01

    Organization theory (OT) provides a way of seeing, describing, analyzing, understanding, and improving organizations based on patterns of organizational design and behavior (Daft 2004). It gives managers models, principles, and methods with which to diagnose and fix organization structure, design, and process problems. Health care organizations (HCOs) face serious problems such as fatal medical errors, harmful treatment delays, misuse of scarce nurses, costly inefficiency, and service failures. Some of health care managers' most critical work involves designing and structuring their organizations so their missions, visions, and goals can be achieved-and in some cases so their organizations can survive. Thus, it is imperative that graduate healthcare management programs develop effective approaches for teaching OT to students who will manage HCOs. Guided by principles of education, three applied teaching/learning activities/assignments were created to teach OT in a graduate healthcare management program. These educationalmethods develop students' competency with OT applied to HCOs. The teaching techniques in this article may be useful to faculty teaching graduate courses in organization theory and related subjects such as leadership, quality, and operation management.

  19. Justification of computational methods to ensure information management systems

    Directory of Open Access Journals (Sweden)

    E. D. Chertov

    2016-01-01

    Full Text Available Summary. Due to the diversity and complexity of organizational management tasks a large enterprise, the construction of an information management system requires the establishment of interconnected complexes of means, implementing the most efficient way collect, transfer, accumulation and processing of information necessary drivers handle different ranks in the governance process. The main trends of the construction of integrated logistics management information systems can be considered: the creation of integrated data processing systems by centralizing storage and processing of data arrays; organization of computer systems to realize the time-sharing; aggregate-block principle of the integrated logistics; Use a wide range of peripheral devices with the unification of information and hardware communication. Main attention is paid to the application of the system of research of complex technical support, in particular, the definition of quality criteria for the operation of technical complex, the development of information base analysis methods of management information systems and define the requirements for technical means, as well as methods of structural synthesis of the major subsystems of integrated logistics. Thus, the aim is to study on the basis of systematic approach of integrated logistics management information system and the development of a number of methods of analysis and synthesis of complex logistics that are suitable for use in the practice of engineering systems design. The objective function of the complex logistics management information systems is the task of gathering systems, transmission and processing of specified amounts of information in the regulated time intervals with the required degree of accuracy while minimizing the reduced costs for the establishment and operation of technical complex. Achieving the objective function of the complex logistics to carry out certain organization of interaction of information

  20. Urban and Building Design Methods for Resource Management

    DEFF Research Database (Denmark)

    Sattrup, Peter Andreas

    2014-01-01

    . Having a structured approach to design methods, a design methodology, is a fundamental aid in decisionmaking and resource management through design. At DTU Civil Engineering experiments are made in crossdisciplinary collaboration between engineers of different specializations and outside collaborators...... but a fewdimensions. Engineers may influence decision making at all levels, and do in many instances have directresponsibility for decision making, - however many (Civil) engineers don’t really think of themselves asdesigners. However this perception is changing. Engineering is fundamentally a design discipline...... management and decision support regardingthe development of the built environment towards a sustainable future....

  1. Human resource training and development. The outdoor management method.

    Directory of Open Access Journals (Sweden)

    THANOS KRIEMADIS

    2008-01-01

    Full Text Available In the age of international competition in today’s economy, companies must train their employees and prepare them for jobs in the future. There are many different types and educational approaches in human resource training, but the present study will focus on the Outdoor Management Development (OMD. For better understanding, the particular training method and the core stages of the training process will be examined and the definitions of OMD as an educational tool for management development will be presented. Basic theories and models will be analysed as well as the benefits earned and evaluation concerns about the effectiveness of such training programs.

  2. [Legal and methodical aspects of occupational risk management].

    Science.gov (United States)

    2011-01-01

    Legal and methodical aspects of occupational risk management (ORM) are considered with account of new official documents. Introduction of risk and risk management notions into Labor Code reflects the change of forms of occupational health and safety. The role of hygienist and occupational medicine professionals in workplace conditions certification (WCC) and periodical medical examinations (PME) is strengthened. The ORM could be improved by introducing the block of prognosis and causation based on IT-technologies that could match systems of WCC and PME thus improving the effectiveness of prophylactics.

  3. Strategies for Meeting High Standards: Quality Management and the Baldrige Criteria in Education. Lessons from the States.

    Science.gov (United States)

    Barth, John; Burk, Zona Sharp; Serfass, Richard; Harms, Barbara Ann; Houlihan, G. Thomas; Anderson, Gerald; Farley, Raymond P.; Rigsby, Ken; O'Rourke, John

    This document, one of a series of reports, focuses on the adoption of principles of quality management, originally developed by W. Edwards Deming, and the Baldrige Criteria for use in education. These processes and tools for systemic organizational management, when comprehensively applied, produce performance excellence and continuous improvement.…

  4. SELECTING A MANAGEMENT SYSTEM HOSPITAL BY A METHOD MULTICRITERIA

    Directory of Open Access Journals (Sweden)

    Vitorino, Sidney L.

    2016-12-01

    Full Text Available The objective of this report is to assess how the multi-criteria method Analytic Hierarchy Process [HP] can help a hospital complex to choose a more suitable management system, known as Enterprise Resource Planning (ERP. The choice coated is very complex due to the novelty of the process of choosing and conflicts generated between areas that did not have a single view of organizational needs, generating a lot of pressure in the department responsible for implementing systems. To assist in this process, he was hired an expert consultant in decision-making and AHP, which in its role of facilitator, contributed to the criteria for system selection were defined, and the choice to occur within a consensual process. We used the study of a single case, based on two indepth interviews with the consultant and the project manager, and documents generated by the advisory and the tool that supported the method. The results of this analysis showed that the method could effectively collaborate in the system acquisition process, but knowledge of the problems of employees and senior management support, it was not used in new decisions of the organization. We conclude that this method contributed to the consensus in the procurement process, team commitment and engagement of those involved.

  5. BUSINESS PROCESS REENGINEERING AS THE METHOD OF PROCESS MANAGEMENT

    Directory of Open Access Journals (Sweden)

    O. Honcharova

    2013-09-01

    Full Text Available The article is devoted to the analysis of process management approach. The main understanding of process management approach has been researched in the article. The definition of process and process management has been given. Also the methods of business process improvement has been analyzed, among them are fast-analysis solution technology (FAST, benchmarking, reprojecting and reengineering. The main results of using business process improvement have been described in figures of reducing cycle time, costs and errors. Also the tasks of business process reengineering have been noticed. The main stages of business process reengineering have been noticed. The main efficiency results of business process reengineering and its success factors have been determined.

  6. UK methods for studying fuel management in water moderated reactors

    International Nuclear Information System (INIS)

    Fayers, F.J.

    1970-10-01

    Current UK methods for studying fuel management and for predicting the reactor physics performance for both light and heavy water moderated power reactors are reviewed. Brief descriptions are given of the less costly computer codes used for initial assessment studies, and also the more elaborate programs associated with detailed evaluation are discussed. Some of the considerations influencing the accuracy of predictions are included with examples of various types of experimental confirmation. (author)

  7. Methods and apparatus for managing corrosion in buildings

    Science.gov (United States)

    Chey, S Jay; Hamann, Hendrik F; Klein, Levente Ioan; Schappert, Michael Alan; Stepanchuk, Andriy

    2015-02-03

    Principles of the invention provide methods and apparatus for providing corrosion management in buildings. In one aspect, an exemplary method includes the step of receiving first data relating corrosion rate to a plurality of environmental conditions. This first data is subsequently utilized to determine a quantitative relationship between corrosion rate and the plurality of environmental conditions. In another step, second data indicative of one or more environmental conditions within a building is received. A corrosion rate in the building is then determined at least in part by applying the determined quantitative relationship to this second data.

  8. Methods for studying fuel management in advanced gas cooled reactors

    International Nuclear Information System (INIS)

    Buckler, A.N.; Griggs, C.F.; Tyror, J.G.

    1971-07-01

    The methods used for studying fuel and absorber management problems in AGRs are described. The basis of the method is the use of ARGOSY lattice data in reactor calculations performed at successive time steps. These reactor calculations may be quite crude but for advanced design calculations a detailed channel-by-channel representation of the whole core is required. The main emphasis of the paper is in describing such an advanced approach - the ODYSSEUS-6 code. This code evaluates reactor power distributions as a function of time and uses the information to select refuelling moves and determine controller positions. (author)

  9. A discrete optimization method for nuclear fuel management

    International Nuclear Information System (INIS)

    Argaud, J.P.

    1993-04-01

    Nuclear loading pattern elaboration can be seen as a combinational optimization problem of tremendous size and with non-linear cost-functions, and search are always numerically expensive. After a brief introduction of the main aspects of nuclear fuel management, this paper presents a new idea to treat the combinational problem by using informations included in the gradient of a cost function. The method is to choose, by direct observation of the gradient, the more interesting changes in fuel loading patterns. An example is then developed to illustrate an operating mode of the method, and finally, connections with simulated annealing and genetic algorithms are described as an attempt to improve search processes

  10. Uncertainty Management of Dynamic Tariff Method for Congestion Management in Distribution Networks

    DEFF Research Database (Denmark)

    Huang, Shaojun; Wu, Qiuwei; Cheng, Lin

    2016-01-01

    The dynamic tariff (DT) method is designed for the distribution system operator (DSO) to alleviate congestions that might occur in a distribution network with high penetration of distributed energy resources (DERs). Uncertainty management is required for the decentralized DT method because the DT...... is de- termined based on optimal day-ahead energy planning with forecasted parameters such as day-ahead energy prices and en- ergy needs which might be different from the parameters used by aggregators. The uncertainty management is to quantify and mitigate the risk of the congestion when employing...

  11. A Model-Driven Development Method for Management Information Systems

    Science.gov (United States)

    Mizuno, Tomoki; Matsumoto, Keinosuke; Mori, Naoki

    Traditionally, a Management Information System (MIS) has been developed without using formal methods. By the informal methods, the MIS is developed on its lifecycle without having any models. It causes many problems such as lack of the reliability of system design specifications. In order to overcome these problems, a model theory approach was proposed. The approach is based on an idea that a system can be modeled by automata and set theory. However, it is very difficult to generate automata of the system to be developed right from the start. On the other hand, there is a model-driven development method that can flexibly correspond to changes of business logics or implementing technologies. In the model-driven development, a system is modeled using a modeling language such as UML. This paper proposes a new development method for management information systems applying the model-driven development method to a component of the model theory approach. The experiment has shown that a reduced amount of efforts is more than 30% of all the efforts.

  12. A method for livestock waste management planning in NE Spain

    International Nuclear Information System (INIS)

    Teira-Esmatges, M.R.; Flotats, X.

    2003-01-01

    A method of decision-making on livestock wastes management in areas with nutrient surplus due to high livestock density is applied in Catalonia (NE Spain). Nutrient balance is made considering soil nitrogen application as the limiting factor. Special attention is paid to the centralized treatment option. The method presented consists of: - minimizing livestock waste generation (at farm scale) as a step previous to any other, both in amount and limiting components,; - applying the nitrogen balance method at regional and municipal scale and providing enough storage capacity in order to apply wastes in an agronomically correct way,; - spatially refining the results of the nitrogen balance by a proposed method that allows precisely pinpointing the hotspots of livestock waste generation, where centralized treatment might be an interesting option, and; - deciding on the waste treatment objectives, provided that treatments be necessary. Knowledge about the wastes, meeting the interests and merging the efforts of the various actors, as well as an adequate budget are necessary ingredients for the success of any waste management plan

  13. Methods of currency risk management in foreign trade

    Directory of Open Access Journals (Sweden)

    V.V. Ksendzuk

    2016-03-01

    Full Text Available Development of the country’s market national economy is closely connected with international economic relations. Therefore national business entities are actively involved in foreign trade, and their positive results influence not only on the status and income of owners, but form the economic potential of the country. The survey describes the main indicators of foreign trade and the impact of export and import transactions on economic development of Ukraine, particularly on the gross domestic income of the country. Taking into account also the negative trends in foreign currency exchange rates, the article considers the types of currency risks that accompany international transactions and identifies the limits of the usefulness of currency risk management methods. The methods of currency risk management are also systematized, the benefits of their use for the enterprise are considered and the status and readiness of Ukraine’s financial market to ensure appropriate conditions for the functioning of the currency risk management in domestic enterprises are analyzed.

  14. Tank Operations Contract Construction Management Methodology. Utilizing The Agency Method Of Construction Management

    International Nuclear Information System (INIS)

    Lesko, K.F.; Berriochoa, M.V.

    2010-01-01

    Washington River Protection Solutions, LLC (WRPS) has faced significant project management challenges in managing Davis-Bacon construction work that meets contractually required small business goals. The unique challenge is to provide contracting opportunities to multiple small business constructioin subcontractors while performing high hazard work in a safe and productive manner. Previous to the WRPS contract, construction work at the Hanford Tank Farms was contracted to large companies, while current Department of Energy (DOE) Contracts typically emphasize small business awards. As an integral part of Nuclear Project Management at Hanford Tank Farms, construction involves removal of old equipment and structures and installation of new infrastructure to support waste retrieval and waste feed delivery to the Waste Treatment Plant. Utilizing the optimum construction approach ensures that the contractors responsible for this work are successful in meeting safety, quality, cost and schedule objectives while working in a very hazardous environment. This paper descirbes the successful transition from a traditional project delivery method that utilized a large business general contractor and subcontractors to a new project construction management model that is more oriented to small businesses. Construction has selected the Agency Construction Management Method (John E Schaufelberger, Len Holm, 'Management of Construction Projects, A Constructor's Perspective', University of Washington, Prentice Hall 2002). This method was implemented in the first quarter of Fiscal Year 2009 (FY2009), where Construction Management is performed by substantially home office resources from the URS Northwest Office in Richland, Washington. The Agency Method has allowed WRPS to provide proven Construction Managers and Field Leads to mentor and direct small business contractors, thus providing expertise and assurance of a successful project. Construction execution contracts are subcontracted

  15. TANK OPERATIONS CONTRACT CONSTRUCTION MANAGEMENT METHODOLOGY UTILIZING THE AGENCY METHOD OF CONSTRUCTION MANAGEMENT

    Energy Technology Data Exchange (ETDEWEB)

    LESKO KF; BERRIOCHOA MV

    2010-02-26

    Washington River Protection Solutions, LLC (WRPS) has faced significant project management challenges in managing Davis-Bacon construction work that meets contractually required small business goals. The unique challenge is to provide contracting opportunities to multiple small business constructioin subcontractors while performing high hazard work in a safe and productive manner. Previous to the WRPS contract, construction work at the Hanford Tank Farms was contracted to large companies, while current Department of Energy (DOE) Contracts typically emphasize small business awards. As an integral part of Nuclear Project Management at Hanford Tank Farms, construction involves removal of old equipment and structures and installation of new infrastructure to support waste retrieval and waste feed delivery to the Waste Treatment Plant. Utilizing the optimum construction approach ensures that the contractors responsible for this work are successful in meeting safety, quality, cost and schedule objectives while working in a very hazardous environment. This paper descirbes the successful transition from a traditional project delivery method that utilized a large business general contractor and subcontractors to a new project construction management model that is more oriented to small businesses. Construction has selected the Agency Construction Management Method (John E Schaufelberger, Len Holm, "Management of Construction Projects, A Constructor's Perspective", University of Washington, Prentice Hall 2002). This method was implemented in the first quarter of Fiscal Year 2009 (FY2009), where Construction Management is performed by substantially home office resources from the URS Northwest Office in Richland, Washington. The Agency Method has allowed WRPS to provide proven Construction Managers and Field Leads to mentor and direct small business contractors, thus providing expertise and assurance of a successful project. Construction execution contracts are

  16. Internal and External Dialogue: A Method for Quality Court Management

    Directory of Open Access Journals (Sweden)

    Marie Hagsgård

    2008-10-01

    Full Text Available The aim of quality court work is to maintain or improve public trust in the court as a vital part of a democratic society. Public confidence in the judicial system is affected by a number of factors, including speedy and judicially correct decisions which are generally understandable and a good treatment of parties and witnesses before and during court proceedings. In order to uphold and enhance public trust, courts need to work systematically to improve the quality of court functioning. But questions remain regarding how to institute quality court management, and how to achieve positive results. Although court managers in Sweden have shown an interest in starting systematic quality work, they have found it difficult to find a method for such work and systematically achieving results.

  17. Evaluation of teaching methods for the company management course

    Directory of Open Access Journals (Sweden)

    Mirjana Ivanuša Bezjak

    2006-12-01

    Full Text Available Teaching process depends on its contents, professional and didactical realization. Successful combination of these three factors is a condition to reach a quality-based objective of the pedagogical process on one side and having successfully passed the exam on the other side. Nevertheless, teachers' aims are to encourage students to use their acquired knowledge, and develop a new viewpoint of work in their professional life. In this discussion the evaluation of didactical realization of the Company Management Course in a higher educational program for commerce is presented. The results of the questionnaire and their analysis are represented. Mentioned data is feedback information, which the teachers find useful to improve their skills in Company Management Course in the following academic year. The reader of this discussion will be able to get new ideas for modernization of his or her didactical methods of teaching.

  18. Digital Threat and Vulnerability Management: The SVIDT Method

    Directory of Open Access Journals (Sweden)

    Roland W. Scholz

    2017-04-01

    Full Text Available The Digital Revolution is inducing major threats to many types of human systems. We present the SVIDT method (a Strengths, Vulnerability, and Intervention Assessment related to Digital Threats for managing the vulnerabilities of human systems with respect to digital threats and changes. The method first performs a multilevel system–actor analysis for assessing vulnerabilities and strengths with respect to digital threats. Then, the method identifies threat scenarios that may become real. By constructing, evaluating, and launching interventions against all identified digital threats and their critical negative outcomes, the resilience of a specific human system can be improved. The evaluation of interventions is done when strengthening the adaptive capacity, i.e., a system’s capability to cope with negative outcomes that may take place in the future. The SVIDT method is embedded in the framework of coupled human–environment systems, the theory of risk and vulnerability assessment, types of adaptation (assimilation vs. accommodation, and a comprehensive sustainability evaluation. The SVIDT method is exemplarily applied to an enterprise (i.e., a Swiss casino for which online gaming has become an essential digital-business field. The discussion reflects on the specifics of digital threats and discusses both the potential benefits and limitations of the SVIDT method.

  19. Review: Optimization methods for groundwater modeling and management

    Science.gov (United States)

    Yeh, William W.-G.

    2015-09-01

    Optimization methods have been used in groundwater modeling as well as for the planning and management of groundwater systems. This paper reviews and evaluates the various optimization methods that have been used for solving the inverse problem of parameter identification (estimation), experimental design, and groundwater planning and management. Various model selection criteria are discussed, as well as criteria used for model discrimination. The inverse problem of parameter identification concerns the optimal determination of model parameters using water-level observations. In general, the optimal experimental design seeks to find sampling strategies for the purpose of estimating the unknown model parameters. A typical objective of optimal conjunctive-use planning of surface water and groundwater is to minimize the operational costs of meeting water demand. The optimization methods include mathematical programming techniques such as linear programming, quadratic programming, dynamic programming, stochastic programming, nonlinear programming, and the global search algorithms such as genetic algorithms, simulated annealing, and tabu search. Emphasis is placed on groundwater flow problems as opposed to contaminant transport problems. A typical two-dimensional groundwater flow problem is used to explain the basic formulations and algorithms that have been used to solve the formulated optimization problems.

  20. Electrical power distribution control methods, electrical energy demand monitoring methods, and power management devices

    Science.gov (United States)

    Chassin, David P [Pasco, WA; Donnelly, Matthew K [Kennewick, WA; Dagle, Jeffery E [Richland, WA

    2011-12-06

    Electrical power distribution control methods, electrical energy demand monitoring methods, and power management devices are described. In one aspect, an electrical power distribution control method includes providing electrical energy from an electrical power distribution system, applying the electrical energy to a load, providing a plurality of different values for a threshold at a plurality of moments in time and corresponding to an electrical characteristic of the electrical energy, and adjusting an amount of the electrical energy applied to the load responsive to an electrical characteristic of the electrical energy triggering one of the values of the threshold at the respective moment in time.

  1. Method and apparatus for managing transactions with connected computers

    Science.gov (United States)

    Goldsmith, Steven Y.; Phillips, Laurence R.; Spires, Shannon V.

    2003-01-01

    The present invention provides a method and apparatus that make use of existing computer and communication resources and that reduce the errors and delays common to complex transactions such as international shipping. The present invention comprises an agent-based collaborative work environment that assists geographically distributed commercial and government users in the management of complex transactions such as the transshipment of goods across the U.S.-Mexico border. Software agents can mediate the creation, validation and secure sharing of shipment information and regulatory documentation over the Internet, using the World-Wide Web to interface with human users.

  2. An Optimal Method for Developing Global Supply Chain Management System

    Directory of Open Access Journals (Sweden)

    Hao-Chun Lu

    2013-01-01

    Full Text Available Owing to the transparency in supply chains, enhancing competitiveness of industries becomes a vital factor. Therefore, many developing countries look for a possible method to save costs. In this point of view, this study deals with the complicated liberalization policies in the global supply chain management system and proposes a mathematical model via the flow-control constraints, which are utilized to cope with the bonded warehouses for obtaining maximal profits. Numerical experiments illustrate that the proposed model can be effectively solved to obtain the optimal profits in the global supply chain environment.

  3. Development of modelling method selection tool for health services management: from problem structuring methods to modelling and simulation methods.

    Science.gov (United States)

    Jun, Gyuchan T; Morris, Zoe; Eldabi, Tillal; Harper, Paul; Naseer, Aisha; Patel, Brijesh; Clarkson, John P

    2011-05-19

    There is an increasing recognition that modelling and simulation can assist in the process of designing health care policies, strategies and operations. However, the current use is limited and answers to questions such as what methods to use and when remain somewhat underdeveloped. The aim of this study is to provide a mechanism for decision makers in health services planning and management to compare a broad range of modelling and simulation methods so that they can better select and use them or better commission relevant modelling and simulation work. This paper proposes a modelling and simulation method comparison and selection tool developed from a comprehensive literature review, the research team's extensive expertise and inputs from potential users. Twenty-eight different methods were identified, characterised by their relevance to different application areas, project life cycle stages, types of output and levels of insight, and four input resources required (time, money, knowledge and data). The characterisation is presented in matrix forms to allow quick comparison and selection. This paper also highlights significant knowledge gaps in the existing literature when assessing the applicability of particular approaches to health services management, where modelling and simulation skills are scarce let alone money and time. A modelling and simulation method comparison and selection tool is developed to assist with the selection of methods appropriate to supporting specific decision making processes. In particular it addresses the issue of which method is most appropriate to which specific health services management problem, what the user might expect to be obtained from the method, and what is required to use the method. In summary, we believe the tool adds value to the scarce existing literature on methods comparison and selection.

  4. INNOVATIVE USE OF QUALITY MANAGEMENT METHODS FOR PRODUCT IMPROVEMENT

    Directory of Open Access Journals (Sweden)

    Katarzyna MIDOR

    2016-10-01

    Full Text Available Organisations constantly look for new, innovative solutions and methods which could be used to improve their efficiency and increase the quality of their products. Identifying the causes for returns is an important issue for modern compa-nies, as returns are the cause for the increase in production costs and, most importantly, the loss of credibility in the eyes of the client. Therefore, for the company to be able to sustain or strengthen its position on the market, it has to follow the rules of quality management. Especially important is the rule of constant improvement. This rule is primarily connected with preventing errors and defects from occurring at all the stages of the production process. To achieve that, one must, among other things, use quality management tools. The article presents an analysis of causes for returns of a vibrating screen produced by a company which manufactures machinery and equipment for the extractive industry, using quality management tools such as the Ishikawa diagram and Pareto analysis. The analysis allowed for the identifi-cation of the causes of client returns which could not be previously identified, and proposing solutions for them.

  5. Innovative Use of Quality Management Methods for Product Improvement

    Science.gov (United States)

    Midor, Katarzyna; Žarnovský, Jozef

    2016-12-01

    Organisations constantly look for new, innovative solutions and methods which could be used to improve their efficiency and increase the quality of their products. Identifying the causes for returns is an important issue for modern companies, as returns are the cause for the increase in production costs and, most importantly, the loss of credibility in the eyes of the client. Therefore, for the company to be able to sustain or strengthen its position on the market, it has to follow the rules of quality management. Especially important is the rule of constant improvement. This rule is primarily connected with preventing errors and defects from occurring at all the stages of the production process. To achieve that, one must, among other things, use quality management tools. The article presents an analysis of causes for returns of a vibrating screen produced by a company which manufactures machinery and equipment for the extractive industry, using quality management tools such as the Ishikawa diagram and Pareto analysis. The analysis allowed for the identification of the causes of client returns which could not be previously identified, and proposing solutions for them.

  6. Clinical management methods for out-patients with alcohol dependence

    Directory of Open Access Journals (Sweden)

    Boulze Isabelle

    2006-02-01

    Full Text Available Abstract Background In France outpatient centres for the care of alcoholics are healthcare establishments providing medical, psychological and social support. Although they meet the practical needs of these patients, their degree of use in each of these domains and the respective mobilisation of different skills by the care team are not well understood. Our aim was therefore to determine in detail the management involved as a function of the severity of alcohol dependence. For this purpose, all the procedures involved were compiled in a thesaurus describing its type (psychological, medical, social, reception, its scheduled or unscheduled nature, its method (face-to-face, telephone, letter and its duration. The severity of dependence was evaluated using the Addiction Severity Index (ASI. Results 45 patients were included and followed-up during 291 ± 114 days. The mean initial ASI scores (± SD were: medical (M = 0.39 ± 0.3, working-income (ER = 0.5 ± 0.3, alcohol (A = 0.51 ± 0.2, illicit drugs (D = 0.07 ± 0.08, legal (L = 0.06 ± 0.13, familial and social environment (FS = 0.34 ± 0.26, psychological (P = 0.39 ± 0.22. The total number of procedures was 1341 (29.8 per patient corresponding to 754.4 hours (16.7 per patient. The intensity of management peaked during the first month of treatment, and then declined rapidly; the maximum incidence of abstinence was observed during the 3rd month of management. Interviews with patients, group therapy and staff meetings represented 68.7%, 9.9% and 13.9% of all procedures, respectively. In patients with severe dependence, as compared to moderate, management was twice as intense in the psychological and social domains, but not in the medical domain. The ASI questionnaire was completed a second time by 24 patients, after an average of 3.2 months. The improvement was significant in the M, A, D and P domains only. Conclusion This study provided an overview of the methods employed in managing a sample of

  7. Development of planning methods for demand-side management (DSM)

    International Nuclear Information System (INIS)

    Kaerkkaeinen, S.; Kekkonen, V.; Rissanen, P.

    1995-01-01

    The interest of utilities and governmental agencies in Demand-side management (IDSM) and Integrated Resource Planning (IRP) has increased during recent years also in Finland. From the governmental point of view, the main reason for this has been concern about the environmental effects of electricity supply and consumption. Utilities are mainly interested in cost reductions in electricity supply and distribution caused by DSM. Also improved service to the customer due to DSM has increasing value to utilities. In this project, the main target has been to develop and assess methods for DSM planning from the utility point of view. The final goal is to integrate these methods into the strategic planning of electric utilities

  8. A discrete optimization method for nuclear fuel management

    International Nuclear Information System (INIS)

    Argaud, J.P.

    1993-04-01

    Nuclear loading pattern elaboration can be seen as a combinational optimization problem, of tremendous size and with non-linear cost-functions, and search are always numerically expensive. After a brief introduction of the main aspects of nuclear fuel management, this note presents a new idea to treat the combinational problem by using informations included in the gradient of a cost function. The method is to choose, by direct observation of the gradient, the more interesting changes in fuel loading patterns. An example is then developed to illustrate an operating mode of the method, and finally, connections with simulated annealing and genetic algorithms are described as an attempt to improve search processes. (author). 1 fig., 16 refs

  9. Methods and Systems for Advanced Spaceport Information Management

    Science.gov (United States)

    Fussell, Ronald M. (Inventor); Ely, Donald W. (Inventor); Meier, Gary M. (Inventor); Halpin, Paul C. (Inventor); Meade, Phillip T. (Inventor); Jacobson, Craig A. (Inventor); Blackwell-Thompson, Charlie (Inventor)

    2007-01-01

    Advanced spaceport information management methods and systems are disclosed. In one embodiment, a method includes coupling a test system to the payload and transmitting one or more test signals that emulate an anticipated condition from the test system to the payload. One or more responsive signals are received from the payload into the test system and are analyzed to determine whether one or more of the responsive signals comprises an anomalous signal. At least one of the steps of transmitting, receiving, analyzing and determining includes transmitting at least one of the test signals and the responsive signals via a communications link from a payload processing facility to a remotely located facility. In one particular embodiment, the communications link is an Internet link from a payload processing facility to a remotely located facility (e.g. a launch facility, university, etc.).

  10. Principles of disaster management. Lesson 7: Management leadership styles and methods.

    Science.gov (United States)

    Cuny, F C

    2000-01-01

    This lesson explores the use of different management leadership styles and methods that are applied to disaster management situations. Leadership and command are differentiated. Mechanisms that can be used to influence others developed include: 1) coercion; 2) reward; 3) position; 4) knowledge; and 5) admiration. Factors that affect leadership include: 1) individual characteristics; 2) competence; 3) experience; 4) self-confidence; 5) judgment; 6) decision-making; and 8) style. Experience and understanding the task are important factors for leadership. Four styles of leadership are developed: 1) directive; 2) supportive; 3) participative; and 4) achievement oriented. Application of each of these styles is discussed. The styles are discussed further as they relate to the various stages of a disaster. The effects of interpersonal relationships and the effects of the environment are stressed. Lastly, leadership does not just happen because a person is appointed as a manager--it must be earned.

  11. Selected Tools and Methods from Quality Management Field

    Directory of Open Access Journals (Sweden)

    Kateřina BRODECKÁ

    2009-06-01

    Full Text Available Following paper describes selected tools and methods from Quality management field and their practical applications on defined examples. Solved examples were elaborated in the form of electronic support. This in detail elaborated electronic support provides students opportunity to thoroughly practice specific issues, help them to prepare for exams and consequently will lead to education improvement. Especially students of combined study form will appreciate this support. The paper specifies project objectives, subjects that will be covered by mentioned support, target groups, structure and the way of elaboration of electronic exercise book in view. The emphasis is not only on manual solution of selected examples that may help students to understand the principles and relationships, but also on solving and results interpreting of selected examples using software support. Statistic software Statgraphics Plus v 5.0 is used while working support, because it is free to use for all students of the faculty. Exemplary example from the subject Basic Statistical Methods of Quality Management is also part of this paper.

  12. Semi-definite Programming: methods and algorithms for energy management

    International Nuclear Information System (INIS)

    Gorge, Agnes

    2013-01-01

    The present thesis aims at exploring the potentialities of a powerful optimization technique, namely Semi-definite Programming, for addressing some difficult problems of energy management. We pursue two main objectives. The first one consists of using SDP to provide tight relaxations of combinatorial and quadratic problems. A first relaxation, called 'standard' can be derived in a generic way but it is generally desirable to reinforce them, by means of tailor-made tools or in a systematic fashion. These two approaches are implemented on different models of the Nuclear Outages Scheduling Problem, a famous combinatorial problem. We conclude this topic by experimenting the Lasserre's hierarchy on this problem, leading to a sequence of semi-definite relaxations whose optimal values tends to the optimal value of the initial problem. The second objective deals with the use of SDP for the treatment of uncertainty. We investigate an original approach called 'distributionally robust optimization', that can be seen as a compromise between stochastic and robust optimization and admits approximations under the form of a SDP. We compare the benefits of this method w.r.t classical approaches on a demand/supply equilibrium problem. Finally, we propose a scheme for deriving SDP relaxations of MISOCP and we report promising computational results indicating that the semi-definite relaxation improves significantly the continuous relaxation, while requiring a reasonable computational effort. SDP therefore proves to be a promising optimization method that offers great opportunities for innovation in energy management. (author)

  13. Analytical method of waste allocation in waste management systems: Concept, method and case study

    International Nuclear Information System (INIS)

    Bergeron, Francis C.

    2017-01-01

    Waste is not a rejected item to dispose anymore but increasingly a secondary resource to exploit, influencing waste allocation among treatment operations in a waste management (WM) system. The aim of this methodological paper is to present a new method for the assessment of the WM system, the “analytical method of the waste allocation process” (AMWAP), based on the concept of the “waste allocation process” defined as the aggregation of all processes of apportioning waste among alternative waste treatment operations inside or outside the spatial borders of a WM system. AMWAP contains a conceptual framework and an analytical approach. The conceptual framework includes, firstly, a descriptive model that focuses on the description and classification of the WM system. It includes, secondly, an explanatory model that serves to explain and to predict the operation of the WM system. The analytical approach consists of a step-by-step analysis for the empirical implementation of the conceptual framework. With its multiple purposes, AMWAP provides an innovative and objective modular method to analyse a WM system which may be integrated in the framework of impact assessment methods and environmental systems analysis tools. Its originality comes from the interdisciplinary analysis of the WAP and to develop the conceptual framework. AMWAP is applied in the framework of an illustrative case study on the household WM system of Geneva (Switzerland). It demonstrates that this method provides an in-depth and contextual knowledge of WM. - Highlights: • The study presents a new analytical method based on the waste allocation process. • The method provides an in-depth and contextual knowledge of the waste management system. • The paper provides a reproducible procedure for professionals, experts and academics. • It may be integrated into impact assessment or environmental system analysis tools. • An illustrative case study is provided based on household waste

  14. Analytical method of waste allocation in waste management systems: Concept, method and case study

    Energy Technology Data Exchange (ETDEWEB)

    Bergeron, Francis C., E-mail: francis.b.c@videotron.ca

    2017-01-15

    Waste is not a rejected item to dispose anymore but increasingly a secondary resource to exploit, influencing waste allocation among treatment operations in a waste management (WM) system. The aim of this methodological paper is to present a new method for the assessment of the WM system, the “analytical method of the waste allocation process” (AMWAP), based on the concept of the “waste allocation process” defined as the aggregation of all processes of apportioning waste among alternative waste treatment operations inside or outside the spatial borders of a WM system. AMWAP contains a conceptual framework and an analytical approach. The conceptual framework includes, firstly, a descriptive model that focuses on the description and classification of the WM system. It includes, secondly, an explanatory model that serves to explain and to predict the operation of the WM system. The analytical approach consists of a step-by-step analysis for the empirical implementation of the conceptual framework. With its multiple purposes, AMWAP provides an innovative and objective modular method to analyse a WM system which may be integrated in the framework of impact assessment methods and environmental systems analysis tools. Its originality comes from the interdisciplinary analysis of the WAP and to develop the conceptual framework. AMWAP is applied in the framework of an illustrative case study on the household WM system of Geneva (Switzerland). It demonstrates that this method provides an in-depth and contextual knowledge of WM. - Highlights: • The study presents a new analytical method based on the waste allocation process. • The method provides an in-depth and contextual knowledge of the waste management system. • The paper provides a reproducible procedure for professionals, experts and academics. • It may be integrated into impact assessment or environmental system analysis tools. • An illustrative case study is provided based on household waste

  15. PRODUCTION PROGRAM OPTIMIZATION – RESPONSIBLE MANAGEMENT METHOD OF LOGGING

    Directory of Open Access Journals (Sweden)

    Severian Vlăduț IACOB

    2014-06-01

    Full Text Available Aggression of any kind on the environment and especially uncontrolled exploitation of forests has generated mixed reaction among the public and politicians, but especially in the academic sphere where actually were fired early warning signs of the effects of these actions. Reduction of Earth's forested areas was discussed by specialists as continuous and highly accelerated, especially in the last century when reserve "green gold" of mankind has halved. As a result, the conservation of forests and prevention of environmental degradation have become great concerns of each nation, but the need for global action required the transformation into strategic objectives of regional and international bodies. They have designed policies and measures generally available and have created favorable framework implementation in the Member States and beyond. One of the projects that came to life and expanded worldwide was the sustainable development today, basically there are no area where the activity is not subrogated to achieve a balance between the components of economic, social and environmental. From this perspective forestry and forestry exploitation is the place where really have achieved sustainability. Achieving this requirement becomes an obligation, both for woodland owners and operators seeking to obtain profit from logging. Compliance and ensuring responsible management are certainly prerequisites of sustainability in this sector. Scientific planning of production is a method of management responsible. This study takes into account, on the one hand, highlighting the effects generated by uncontrolled deforestation and the importance of sustainable forest exploitation, and on the other hand, presenting the need to use scientific methods to practice responsible management.

  16. PENERAPAN TOTAL QUALITY MANAGEMENT PADA PROGRAM STUDI MPI FAKULTAS TARBIYAH DAN KEGURUAN UIN ALAUDDIN

    OpenAIRE

    Syahid Syahid

    2017-01-01

    The purpose of this paper is to describe (1) the concept of total quality mana-gement, (2) the theoretical foundation of total quality management, and (3) the application of total quality management in Education management study program at the Faculty of Education and Teaching Science, UIN Alauddin Ma-kassar. There are some theoretical bases to support the implementation of TQM in educational institutions. One is the theory of Deming which can be identified from (a) Deming’s chain reaction mo...

  17. Application of Methods of Management Education in the Selected Organization

    Directory of Open Access Journals (Sweden)

    Ema Milistenferová

    2017-07-01

    Full Text Available The article deals with the issue of educating managers. The first part of the article discusses the requirements for managers skills, managerial competencies, a successful manager profile, and the importance of manager training. The second part of the article evaluates the questionnaire survey conducted at VSE Holding a.s. Focused on the effectiveness of the education of company managers. Based on the survey, individual areas of company manager education are proposed within the programs.

  18. Knowledge management method for knowledge based BWR Core Operation Management System

    Energy Technology Data Exchange (ETDEWEB)

    Wada, Yutaka; Fukuzaki, Takaharu; Kobayashi, Yasuhiro

    1989-03-01

    A knowledge management method is proposed to support an except whose knowledge is stored in a knowledge base in the BWR Core Operation Management System. When the alterations in the operation plans are motivated by the expert after evaluating them, the method attempts to find the knowledge which must be modified and to give the expert guidances. In this way the resultant operation plans are improved by modifying values of referenced data. Using data dependency among data, which are defined and referred during inference, data to be modified are retrieved. In generating modification guidances, data reference and definition procedures are classified by syntactic analysis of knowledge. The modified data values are calculated with a sensitivity between the increment in the data to be modified and the resultant one in the performance of operation plans. The efficiency of the knowledge management by the proposed method, when applied to the knowledge based system including 500 pieces of knowledge for BWR control rod programming, is higher than that for interactive use of existing general purpose editors. (author).

  19. Knowledge management method for knowledge based BWR Core Operation Management System

    International Nuclear Information System (INIS)

    Wada, Yutaka; Fukuzaki, Takaharu; Kobayashi, Yasuhiro

    1989-01-01

    A knowledge management method is proposed to support an except whose knowledge is stored in a knowledge base in the BWR Core Operation Management System. When the alterations in the operation plans are motivated by the expert after evaluating them, the method attempts to find the knowledge which must be modified and to give the expert guidances. In this way the resultant operation plans are improved by modifying values of referenced data. Using data dependency among data, which are defined and referred during inference, data to be modified are retrieved. In generating modification guidances, data reference and definition procedures are classified by syntactic analysis of knowledge. The modified data values are calculated with a sensitivity between the increment in the data to be modified and the resultant one in the performance of operation plans. The efficiency of the knowledge management by the proposed method, when applied to the knowledge based system including 500 pieces of knowledge for BWR control rod programming, is higher than that for interactive use of existing general purpose editors. (author)

  20. Adaptive Methods for Permeability Estimation and Smart Well Management

    Energy Technology Data Exchange (ETDEWEB)

    Lien, Martha Oekland

    2005-04-01

    The main focus of this thesis is on adaptive regularization methods. We consider two different applications, the inverse problem of absolute permeability estimation and the optimal control problem of estimating smart well management. Reliable estimates of absolute permeability are crucial in order to develop a mathematical description of an oil reservoir. Due to the nature of most oil reservoirs, mainly indirect measurements are available. In this work, dynamic production data from wells are considered. More specifically, we have investigated into the resolution power of pressure data for permeability estimation. The inversion of production data into permeability estimates constitutes a severely ill-posed problem. Hence, regularization techniques are required. In this work, deterministic regularization based on adaptive zonation is considered, i.e. a solution approach with adaptive multiscale estimation in conjunction with level set estimation is developed for coarse scale permeability estimation. A good mathematical reservoir model is a valuable tool for future production planning. Recent developments within well technology have given us smart wells, which yield increased flexibility in the reservoir management. In this work, we investigate into the problem of finding the optimal smart well management by means of hierarchical regularization techniques based on multiscale parameterization and refinement indicators. The thesis is divided into two main parts, where Part I gives a theoretical background for a collection of research papers that has been written by the candidate in collaboration with others. These constitutes the most important part of the thesis, and are presented in Part II. A brief outline of the thesis follows below. Numerical aspects concerning calculations of derivatives will also be discussed. Based on the introduction to regularization given in Chapter 2, methods for multiscale zonation, i.e. adaptive multiscale estimation and refinement

  1. Vision training methods for sports concussion mitigation and management.

    Science.gov (United States)

    Clark, Joseph F; Colosimo, Angelo; Ellis, James K; Mangine, Robert; Bixenmann, Benjamin; Hasselfeld, Kimberly; Graman, Patricia; Elgendy, Hagar; Myer, Gregory; Divine, Jon

    2015-05-05

    There is emerging evidence supporting the use vision training, including light board training tools, as a concussion baseline and neuro-diagnostic tool and potentially as a supportive component to concussion prevention strategies. This paper is focused on providing detailed methods for select vision training tools and reporting normative data for comparison when vision training is a part of a sports management program. The overall program includes standard vision training methods including tachistoscope, Brock's string, and strobe glasses, as well as specialized light board training algorithms. Stereopsis is measured as a means to monitor vision training affects. In addition, quantitative results for vision training methods as well as baseline and post-testing *A and Reaction Test measures with progressive scores are reported. Collegiate athletes consistently improve after six weeks of training in their stereopsis, *A and Reaction Test scores. When vision training is initiated as a team wide exercise, the incidence of concussion decreases in players who participate in training compared to players who do not receive the vision training. Vision training produces functional and performance changes that, when monitored, can be used to assess the success of the vision training and can be initiated as part of a sports medical intervention for concussion prevention.

  2. Engineering Change Management Method Framework in Mechanical Engineering

    Science.gov (United States)

    Stekolschik, Alexander

    2016-11-01

    Engineering changes make an impact on different process chains in and outside the company, and lead to most error costs and time shifts. In fact, 30 to 50 per cent of development costs result from technical changes. Controlling engineering change processes can help us to avoid errors and risks, and contribute to cost optimization and a shorter time to market. This paper presents a method framework for controlling engineering changes at mechanical engineering companies. The developed classification of engineering changes and accordingly process requirements build the basis for the method framework. The developed method framework comprises two main areas: special data objects managed in different engineering IT tools and process framework. Objects from both areas are building blocks that can be selected to the overall business process based on the engineering process type and change classification. The process framework contains steps for the creation of change objects (both for overall change and for parts), change implementation, and release. Companies can select singleprocess building blocks from the framework, depending on the product development process and change impact. The developed change framework has been implemented at a division (10,000 employees) of a big German mechanical engineering company.

  3. Integrated Parasite Management for Livestock - Alternative control methods

    Directory of Open Access Journals (Sweden)

    Souvik Paul1

    Full Text Available Internal parasites are considered by some to be one of the most economically important constraints in raising livestock. The growing concern about the resistance of internal parasites to all classes of dewormers has caused people to look for alternatives. As dewormers lose their effectiveness, the livestock community fears increasing economic losses from worms. There is no one thing that can be given or done to replace chemical dewormers. It will take a combination of extremely good management techniques and possibly some alternative therapies. It is not wise to think that one can just stop deworming animals with chemical dewormers. It is something one will need to change gradually, observing and testing animals and soil, in order to monitor the progress. Alternative parasite control is an area that is receiving a lot of interest and attention. Programs and research will continue in the pursuit of parasite control, using alternative and more management-intensive methods. [Veterinary World 2010; 3(9.000: 431-435

  4. Total quality management in American industry.

    Science.gov (United States)

    Widtfeldt, A K; Widtfeldt, J R

    1992-07-01

    The definition of total quality management is conformance to customer requirements and specifications, fitness for use, buyer satisfaction, and value at an affordable price. The three individuals who have developed the total quality management concepts in the United States are W.E. Deming, J.M. Juran, and Philip Crosby. The universal principles of total quality management are (a) a customer focus, (b) management commitment, (c) training, (d) process capability and control, and (e) measurement through quality improvement tools. Results from the National Demonstration Project on Quality Improvement in Health Care showed the principles of total quality management could be applied to healthcare.

  5. System and method for acquisition management of subject position information

    Science.gov (United States)

    Carrender, Curt

    2005-12-13

    A system and method for acquisition management of subject position information that utilizes radio frequency identification (RF ID) to store position information in position tags. Tag programmers receive position information from external positioning systems, such as the Global Positioning System (GPS), from manual inputs, such as keypads, or other tag programmers. The tag programmers program each position tag with the received position information. Both the tag programmers and the position tags can be portable or fixed. Implementations include portable tag programmers and fixed position tags for subject position guidance, and portable tag programmers for collection sample labeling. Other implementations include fixed tag programmers and portable position tags for subject route recordation. Position tags can contain other associated information such as destination address of an affixed subject for subject routing.

  6. Effective IPTV channel management method over heterogeneous environments

    Science.gov (United States)

    Joo, Hyunchul; Lee, Dai-boong; Song, Hwangjun

    2007-09-01

    This paper presents an effective IPTV channel management method using SVC (scalable video coding) that considers concurrently both channel zapping time and network utilization. A broadcasting channel is encoded in two-layered bitstream (base-layer channel and enhancement-layer channel) to supply for heterogeneous environments. The proposed algorithm locates only a limited numbers of base-layer channels close to users to reduce the network delay part of channel zapping time and adjusts the length of GOP (group of picture) into each base-layer channel to decrease the video decoding delay part of channel zapping time, which are performed based on user's channel preference information. Finally, the experimental results are provided to show the performance of the proposed schemes.

  7. Method and apparatus for managing access to a memory

    Science.gov (United States)

    DeBenedictis, Erik

    2017-08-01

    A method and apparatus for managing access to a memory of a computing system. A controller transforms a plurality of operations that represent a computing job into an operational memory layout that reduces a size of a selected portion of the memory that needs to be accessed to perform the computing job. The controller stores the operational memory layout in a plurality of memory cells within the selected portion of the memory. The controller controls a sequence by which a processor in the computing system accesses the memory to perform the computing job using the operational memory layout. The operational memory layout reduces an amount of energy consumed by the processor to perform the computing job.

  8. System and method for acquisition management of subject position information

    Energy Technology Data Exchange (ETDEWEB)

    Carrender, Curt [Morgan Hill, CA

    2007-01-23

    A system and method for acquisition management of subject position information that utilizes radio frequency identification (RF ID) to store position information in position tags. Tag programmers receive position information from external positioning systems, such as the Global Positioning System (GPS), from manual inputs, such as keypads, or other tag programmers. The tag programmers program each position tag with the received position information. Both the tag programmers and the position tags can be portable or fixed. Implementations include portable tag programmers and fixed position tags for subject position guidance, and portable tag programmers for collection sample labeling. Other implementations include fixed tag programmers and portable position tags for subject route recordation. Position tags can contain other associated information such as destination address of an affixed subject for subject routing.

  9. How Agile Methods Conquers General Project Management - The Project Half Double Initiative

    DEFF Research Database (Denmark)

    Tordrup Heeager, Lise; Svejvig, Per; Schlichter, Bjarne Rerup

    2016-01-01

    Increased complexity in projects has forced new project management initiatives. In software development several agile methods have emerged and methods such as Scrum are today highly implemented in practice. General project management practice has been inspired by agile software development...

  10. THE FLUORBOARD A STATISTICALLY BASED DASHBOARD METHOD FOR IMPROVING SAFETY

    International Nuclear Information System (INIS)

    PREVETTE, S.S.

    2005-01-01

    The FluorBoard is a statistically based dashboard method for improving safety. Fluor Hanford has achieved significant safety improvements--including more than a 80% reduction in OSHA cases per 200,000 hours, during its work at the US Department of Energy's Hanford Site in Washington state. The massive project on the former nuclear materials production site is considered one of the largest environmental cleanup projects in the world. Fluor Hanford's safety improvements were achieved by a committed partnering of workers, managers, and statistical methodology. Safety achievements at the site have been due to a systematic approach to safety. This includes excellent cooperation between the field workers, the safety professionals, and management through OSHA Voluntary Protection Program principles. Fluor corporate values are centered around safety, and safety excellence is important for every manager in every project. In addition, Fluor Hanford has utilized a rigorous approach to using its safety statistics, based upon Dr. Shewhart's control charts, and Dr. Deming's management and quality methods

  11. Methods for cost estimation in software project management

    Science.gov (United States)

    Briciu, C. V.; Filip, I.; Indries, I. I.

    2016-02-01

    The speed in which the processes used in software development field have changed makes it very difficult the task of forecasting the overall costs for a software project. By many researchers, this task has been considered unachievable, but there is a group of scientist for which this task can be solved using the already known mathematical methods (e.g. multiple linear regressions) and the new techniques as genetic programming and neural networks. The paper presents a solution for building a model for the cost estimation models in the software project management using genetic algorithms starting from the PROMISE datasets related COCOMO 81 model. In the first part of the paper, a summary of the major achievements in the research area of finding a model for estimating the overall project costs is presented together with the description of the existing software development process models. In the last part, a basic proposal of a mathematical model of a genetic programming is proposed including here the description of the chosen fitness function and chromosome representation. The perspective of model described it linked with the current reality of the software development considering as basis the software product life cycle and the current challenges and innovations in the software development area. Based on the author's experiences and the analysis of the existing models and product lifecycle it was concluded that estimation models should be adapted with the new technologies and emerging systems and they depend largely by the chosen software development method.

  12. Program-target methods of management small business

    Directory of Open Access Journals (Sweden)

    Gurova Ekaterina

    2017-01-01

    Full Text Available Experience of small businesses in Russia are just beginning their path to development. difficulties arise with the involvement of small businesses in the implementation of government development programmes. Small business in modern conditions to secure a visible prospect of development without the implementation of state support programmes. Ways and methods of regulation of development of the market economy are diverse. The total mass of the huge role is played by the program-target methods of regulation. The article describes the basic principles on the use of program-target approach to the development of a specific sector of the economy, as small businesses, designed to play an important role in getting the national economy out of crisis. The material in this publication is built from the need to maintain the connection between the theory of government regulation, practice of formation of development programs at the regional level and the needs of small businesses. Essential for the formation of entrepreneurship development programmes is to preserve the flexibility of small businesses in making management decisions related to the selection and change of activities.

  13. Managing Small-Scale Fisheries: Alternative Directions and Methods

    International Development Research Centre (IDRC) Digital Library (Canada)

    ... instructors and students in fishery management; development organizations and ... fishers and fishing communities that wish to take responsibility for managing ... Fikret Berkes is Professor of Natural Resources at the University of Manitoba, ...

  14. Theoretical Modelling Methods for Thermal Management of Batteries

    Directory of Open Access Journals (Sweden)

    Bahman Shabani

    2015-09-01

    Full Text Available The main challenge associated with renewable energy generation is the intermittency of the renewable source of power. Because of this, back-up generation sources fuelled by fossil fuels are required. In stationary applications whether it is a back-up diesel generator or connection to the grid, these systems are yet to be truly emissions-free. One solution to the problem is the utilisation of electrochemical energy storage systems (ESS to store the excess renewable energy and then reusing this energy when the renewable energy source is insufficient to meet the demand. The performance of an ESS amongst other things is affected by the design, materials used and the operating temperature of the system. The operating temperature is critical since operating an ESS at low ambient temperatures affects its capacity and charge acceptance while operating the ESS at high ambient temperatures affects its lifetime and suggests safety risks. Safety risks are magnified in renewable energy storage applications given the scale of the ESS required to meet the energy demand. This necessity has propelled significant effort to model the thermal behaviour of ESS. Understanding and modelling the thermal behaviour of these systems is a crucial consideration before designing an efficient thermal management system that would operate safely and extend the lifetime of the ESS. This is vital in order to eliminate intermittency and add value to renewable sources of power. This paper concentrates on reviewing theoretical approaches used to simulate the operating temperatures of ESS and the subsequent endeavours of modelling thermal management systems for these systems. The intent of this review is to present some of the different methods of modelling the thermal behaviour of ESS highlighting the advantages and disadvantages of each approach.

  15. Pesticides and public health: integrated methods of mosquito management.

    OpenAIRE

    Rose, R. I.

    2001-01-01

    Pesticides have a role in public health as part of sustainable integrated mosquito management. Other components of such management include surveillance, source reduction or prevention, biological control, repellents, traps, and pesticide-resistance management. We assess the future use of mosquito control pesticides in view of niche markets, incentives for new product development, Environmental Protection Agency registration, the Food Quality Protection Act, and improved pest management strate...

  16. Information systems project management: methods, tools, and techniques

    OpenAIRE

    Mcmanus, John; Wood-Harper, Trevor

    2004-01-01

    Information Systems Project Management offers a clear and logical exposition of how to plan, organise and monitor projects effectively in order to deliver quality information systems within time, to budget and quality. This new book by John McManus and Trevor Wood-Harper is suitable for upper level undergraduates and postgraduates studying project management and Information Systems. Practising managers will also find it to be a valuable tool in their work. Managing information systems pro...

  17. Some Recommendations for Education (and All of Us): Valuing Differences as Collaboration beyond Outcomes Assessment and Total Quality Management/Demingism.

    Science.gov (United States)

    Sadler, Lynn Veach

    Recommendations for a national educational agenda that is based on tolerance for cultural diversity and real collaboration are presented in this paper with emphasis on the W. E. Deming model of Total Quality Management, or "Demingism." Two problems in American education are academic performance and the failure of disadvantaged schools. Ten…

  18. METHODICAL APPROACHES TO THE COST MANAGEMENT OF INDUSTRIAL ENTERPRISES

    Directory of Open Access Journals (Sweden)

    Trunina Iryna

    2018-03-01

    Full Text Available Introduction. The paper deals with the actual issues of managing the costs of industrial enterprises, because in the conditions of an unstable market environment the financial performance depends on the efficiency of the cost management system, competitiveness, financial sustainability and investment attractiveness of any subject of economic activity. Purpose of the article is analys is of approaches to cost management, theoretical substantiation and development of recommendations regarding the formation of strategic cost management. Results. The economic content of cost management in the treatment of different authors and on different approaches: functional, process-oriented and system approaches has been considered. Their essence and features, the direction for operational or strategic management of expenses of the enterprise, ways of spending management in different approaches are determined. It is stated that all considered approaches to cost management of enterprises are aimed at optimal use of resources and ensuring the growth of the efficiency of enterprises. Conclusions. Based on the review of methodological approaches to cost management, recommendations are developed for expanding the implementation of cost management at various levels of enterprise management and the formation of strategic cost management within the framework of strategic management of an enterprise. The strategic cost management is complex category aimed at achieving a rational level of costs in the long run, which allows for the consideration of competitive cost advantages and increase the competitiveness of an industrial enterprise. The implementation of cost reduction strategies should be a constant and important part of the company’s work, while the strategy of cost reduction should be integrated into the overall business strategy of the enterprise.

  19. Lean management systems: creating a culture of continuous quality improvement.

    Science.gov (United States)

    Clark, David M; Silvester, Kate; Knowles, Simon

    2013-08-01

    This is the first in a series of articles describing the application of Lean management systems to Laboratory Medicine. Lean is the term used to describe a principle-based continuous quality improvement (CQI) management system based on the Toyota production system (TPS) that has been evolving for over 70 years. Its origins go back much further and are heavily influenced by the work of W Edwards Deming and the scientific method that forms the basis of most quality management systems. Lean has two fundamental elements--a systematic approach to process improvement by removing waste in order to maximise value for the end-user of the service and a commitment to respect, challenge and develop the people who work within the service to create a culture of continuous improvement. Lean principles have been applied to a growing number of Healthcare systems throughout the world to improve the quality and cost-effectiveness of services for patients and a number of laboratories from all the pathology disciplines have used Lean to shorten turnaround times, improve quality (reduce errors) and improve productivity. Increasingly, models used to plan and implement large scale change in healthcare systems, including the National Health Service (NHS) change model, have evidence-based improvement methodologies (such as Lean CQI) as a core component. Consequently, a working knowledge of improvement methodology will be a core skill for Pathologists involved in leadership and management.

  20. Color management systems: methods and technologies for increased image quality

    Science.gov (United States)

    Caretti, Maria

    1997-02-01

    All the steps in the imaging chain -- from handling the originals in the prepress to outputting them on any device - - have to be well calibrated and adjusted to each other, in order to reproduce color images in a desktop environment as accurate as possible according to the original. Today most of the steps in the prepress production are digital and therefore it is realistic to believe that the color reproduction can be well controlled. This is true thanks to the last years development of fast, cost effective scanners, digital sources and digital proofing devices not the least. It is likely to believe that well defined tools and methods to control this imaging flow will lead to large cost and time savings as well as increased overall image quality. Until now, there has been a lack of good, reliable, easy-to- use systems (e.g. hardware, software, documentation, training and support) in an extent that has made them accessible to the large group of users of graphic arts production systems. This paper provides an overview of the existing solutions to manage colors in a digital pre-press environment. Their benefits and limitations are discussed as well as how they affect the production workflow and organization. The difference between a color controlled environment and one that is not is explained.

  1. OPPORTUNITIES TO IMPROVE THE MANAGEMENT METHODS OF ROMANIAN ORGANIZATIONS

    Directory of Open Access Journals (Sweden)

    Gheorghe Gabriela

    2013-07-01

    Full Text Available Information Technology has responded to the crisis by change and innovation. Competitive organizations are permanently prepared to identify the cutting-edge technologies which will change the future in business by using the concept of Business Intelligence. Information Technology is developing rapidly and providing decision makers with large amounts of information that require processing and analysis. Business Intelligence are critical decisions support applications, their role being to provide to management, based on information from the company, a landscape of its situation at some time, but also predictions on the medium and long term. This paper describes the architecture of the Business Intelligence Platform and highlights the benefits of using decision support systems for business applications. Nowadays, company executives require relevant and accurate business information in real-time to take strategic decisions. It is also essential to have freedom to access this information anywhere and anytime. There is a real need to extend this functionality beyond the office and on the fingertips of the decision makers. After a presentation of the concept of Data mining with examples from a case study, the paper focuses on the potential of the IT&C decisional sector, which embeds simulation and assistance tools for managerial decisions. Developing new methods for predictive modelling and application of existing techniques in many areas will be a permanent concern for both researchers and companies that are interested to gain competitive advantages.

  2. Dose measurement method suitable for management of food irradiation

    International Nuclear Information System (INIS)

    Tanaka, Ryuichi

    1990-01-01

    The report describes major features of dose measurement performed for the management of food irradiation processes, and dose measuring methods suitable for this purpose, and outlines some activities for establishing international standards for dose measurement. Traceability studies made recently are also reviewed. Compared with the sterilization of medical materials, food irradiation is different in some major points from a viewpoint of dose measurement: foods can undergo significant changes in bulk density, depending on its properties, during irradiation, and the variation in the uniformity of bulk density can be large within an irradiation unit and among different units. An accurate dosimeter and well-established traceability are essential for food irradiation control, and basically a dosimeter should be high in reproducibility and stable in dose response, and should be easy to readjust for eliminating systematic errors. A new type of dosimeter was developed recently, in which ESR is used to measure the free radicals generated by radiations in crystals of alanine, an amino acid. Standardization of large dose measurement procedures has been carried out by committee E10 set up under ASTM. (N.K.)

  3. Managing Sonchus arvensis using mechanical and cultural methods

    Directory of Open Access Journals (Sweden)

    P. VANHALA

    2008-12-01

    Full Text Available Perennial sow-thistle (Sonchus arvensis L. represents an increasing problem in Finland. Options for mechanical and cultural control of S. arvensis were studied in a field experiment on clay soil under organic production. The experiment consisted of different crop sequences: spring cereal (barley, Hordeum vulgare L., in 2001, oats, Avena sativa L., in 2002 with or without inter-row hoeing and/or stubble cultivation, bare fallow, fibre hemp (Cannabis sativa L., and ley with mowing. In 2003 the entire field was sown to spring wheat. Crop plant and Sonchus shoot density and dry mass prior to cereal harvest and crop yield were assessed. The control effect was rated: bare fallow > ley > cereal with or without inter-row hoeing > poor growth fibre hemp. Bare fallow was an effective but costly way to reduce S. arvensis infestation. Introduction of a regularly mown green fallow or silage ley in the crop rotation is advisable. Mechanical weed control by inter-row hoeing in cereals limits S. arvensis growth. Infestation might also be reduced by stubble cultivation in autumn. When managing S. arvensis using mechanical and cultural methods, appropriate options, including a competitive crop, should be chosen for the specific field and rotation.;

  4. MEASUREMENT OF QUALITY MANAGEMENT SYSTEM PERFORMANCE IN MEAT PROCESSING

    Directory of Open Access Journals (Sweden)

    Elena S. Voloshina

    2017-01-01

    Full Text Available Modern methods aimed to ensure the quality of foods require to implement and certify quality management systems in processing plants. In this case, to measure the effectiveness of existing QMS is often a very difficult task for the leadership due to the fragmentation of the measured metrics, or even lack thereof. This points to the relevance of the conducted research.The criteria for effectiveness assessment of the production process of meat processing plants with the use of scaling methods and Shewhart control charts are presented in the article. The authors developed and presented the formulae for the calculation of single indicators used for the further comprehensive assessment. The algorithm of statistical evaluation of the process controllability, which allows in an accessible form to estimate the statistical control of production processes and to organize statistical quality control in the development of quality management systems, is presented The proposed procedure is based on a process approach, the essence of which is the application of the Deming cycle: “Plan — Do — Check — Act”, which makes it easy to integrate it into any existing quality management system.

  5. Review of Congestion Management Methods for Distribution Networks with High Penetration of Distributed Energy Resources

    DEFF Research Database (Denmark)

    Huang, Shaojun; Wu, Qiuwei; Liu, Zhaoxi

    2014-01-01

    This paper reviews the existing congestion management methods for distribution networks with high penetration of DERs documented in the recent research literatures. The congestion management methods for distribution networks reviewed can be grouped into two categories – market methods and direct...... control methods. The market methods consist of dynamic tariff, distribution capacity market, shadow price and flexible service market. The direct control methods are comprised of network reconfiguration, reactive power control and active power control. Based on the review of the existing methods...

  6. An Efficient Method for Detecting Misbehaving Zone Manager in MANET

    Science.gov (United States)

    Rafsanjani, Marjan Kuchaki; Pakzad, Farzaneh; Asadinia, Sanaz

    In recent years, one of the wireless technologies increased tremendously is mobile ad hoc networks (MANETs) in which mobile nodes organize themselves without the help of any predefined infrastructure. MANETs are highly vulnerable to attack due to the open medium, dynamically changing network topology, cooperative algorithms, lack of centralized monitoring, management point and lack of a clear defense line. In this paper, we report our progress in developing intrusion detection (ID) capabilities for MANET. In our proposed scheme, the network with distributed hierarchical architecture is partitioned into zones, so that in each of them there is one zone manager. The zone manager is responsible for monitoring the cluster heads in its zone and cluster heads are in charge of monitoring their members. However, the most important problem is how the trustworthiness of the zone manager can be recognized. So, we propose a scheme in which "honest neighbors" of zone manager specify the validation of their zone manager. These honest neighbors prevent false accusations and also allow manager if it is wrongly misbehaving. However, if the manger repeats its misbehavior, then it will lose its management degree. Therefore, our scheme will be improved intrusion detection and also provide a more reliable network.

  7. Effect of weed management methods and nitrogen fertilizer rates on ...

    African Journals Online (AJOL)

    Inefficient weed management practices and the use of inappropriate nitrogen fertilizer rates are the major causes of low yield of wheat in Ethiopia. Therefore, field experiments were conducted at Bobicho and Faate in southern Ethiopia to determine the effect of weed management practices and N fertilizer rates on grain yield ...

  8. A method to study the management of urban development projects

    NARCIS (Netherlands)

    Heurkens, E.

    2011-01-01

    The management of urban development projects in the Netherlands has changed significantly in recent years. These projects have become mainly ‘led’ by developers as they manage the entire life cycle of development projects, while public actors mainly facilitate development projects. This changes the

  9. A multiscale forecasting method for power plant fleet management

    Science.gov (United States)

    Chen, Hongmei

    In recent years the electric power industry has been challenged by a high level of uncertainty and volatility brought on by deregulation and globalization. A power producer must minimize the life cycle cost while meeting stringent safety and regulatory requirements and fulfilling customer demand for high reliability. Therefore, to achieve true system excellence, a more sophisticated system-level decision-making process with a more accurate forecasting support system to manage diverse and often widely dispersed generation units as a single, easily scaled and deployed fleet system in order to fully utilize the critical assets of a power producer has been created as a response. The process takes into account the time horizon for each of the major decision actions taken in a power plant and develops methods for information sharing between them. These decisions are highly interrelated and no optimal operation can be achieved without sharing information in the overall process. The process includes a forecasting system to provide information for planning for uncertainty. A new forecasting method is proposed, which utilizes a synergy of several modeling techniques properly combined at different time-scales of the forecasting objects. It can not only take advantages of the abundant historical data but also take into account the impact of pertinent driving forces from the external business environment to achieve more accurate forecasting results. Then block bootstrap is utilized to measure the bias in the estimate of the expected life cycle cost which will actually be needed to drive the business for a power plant in the long run. Finally, scenario analysis is used to provide a composite picture of future developments for decision making or strategic planning. The decision-making process is applied to a typical power producer chosen to represent challenging customer demand during high-demand periods. The process enhances system excellence by providing more accurate market

  10. Application of NUREG-1150 methods and results to accident management

    International Nuclear Information System (INIS)

    Dingman, S.E.; Sype, T.T.; Camp, A.L.

    1990-01-01

    The risk from five nuclear power plants was examined during the NUREG-1150 program. When the analyses of the plants were complete, an effort was undertaken to examine the implications of NUREG-1150 for accident management initiatives. The framework provided by the NUREG-1150 analysis presented a means within which current accident management strategies could be evaluated and future accident management strategies could be developed and assessed. Five separate but interrelated phases of risk management were considered: (1) prevention of accident initiators, (2) prevention of core damage, (3) implementation of an effective emergency response, (4) prevention of vessel breach and mitigation of radionuclide releases from the reactor coolant system, and (5) retention of fission products in the containment and other surrounding buildings. A risk-based methodology was developed to identify and evaluate risk management options for each of these five phases. The methodology was demonstrated through quantitative examples for the first two phases of risk management listed above. In addition, the reduction in risk for several currently implemented risk management strategies at operating plants was quantified

  11. Phragmites australis management in the United States: 40 years of methods and outcomes

    OpenAIRE

    Hazelton, Eric L. G.; Mozdzer, Thomas J.; Burdick, David M.; Kettenring, Karin M.; Whigham, Dennis F.

    2014-01-01

    Studies on invasive plant management are often short in duration and limited in the methods tested, and lack an adequate description of plant communities that replace the invader following removal. Here we present a comprehensive review of management studies on a single species, in an effort to elucidate future directions for research in invasive plant management. We reviewed the literature on Phragmites management in North America in an effort to synthesize our understanding of management ef...

  12. The Hidden Factors Behind Japan's Highly Productive Management Methods.

    Science.gov (United States)

    Dillon, Linda S.

    1984-01-01

    Discusses Japanese management from the perspective of the complex relationship between Japanese culture and their practice of lifelong employment, shared authority in decision making, and dissolution of many of the privileges of rank. (Author)

  13. WasteWise Resource Management: Innovative Solid Waste Contracting Methods

    Science.gov (United States)

    Resource management is an innovative contractual partnership between a waste-generating organization and a qualified contractor that changes the nature of current disposal services to support waste minimization and recycling.

  14. METHODS OF PORTFOLIO MANAGEMENT - A REVIEW OF LITERATURE -

    OpenAIRE

    CRISTINA CURUTIU

    2008-01-01

    In recent years, a growing body of literature in portfolio management has devoted a great deal of attention for this subject. The theoretical foundation to portfolio management was offered by Harry Markowitz at the beginning of the 1950s. The limitations of the original Markowitz model have stimulated the occurrence of extended or modified models – two of the best known (and criticized) being the equilibrium models: CAPM (capital asset pricing model) and APT (arbitrage pricing theory). Altern...

  15. Quality Management in the Knowledge Based Economy – Kaizen Method

    OpenAIRE

    Popa Liliana Viorica

    2010-01-01

    In the knowledge based economy, organisations are influenced by the quality movement, Kaizen, which plays a strategic role for optimization of organizational capabilities of managers as well as of all the employees. Kaizen represents the philosophy of continuous improvement, until the economic activities inside the organisation reach zero deficiencies. In order to implement in a proper manner Kaizen into the organization, managers must decide what to improve, why to improve, who shall improve...

  16. Mathematical Methods of Managing Economic Sustainability of the Construction Company

    Science.gov (United States)

    Kostuchenko, Vasiliy; Zdanov, Andrej; Rodionov, Anatolij

    2017-10-01

    This article presents a long-term research in developing innovative mathematical techniques of managing the contractor’s economic sustainability proven by some experimental studies. The article aims at presenting some practical results of applying these techniques to the scientific community. This research presents a description of some applied mathematical models, views, and some results of their practical application in the applied field for the purposes of evaluating operational sustainability and minimizing losses in the process of managing the company. The authors have put the technology they have developed to practical use, and the article presents the results of such application. The authors have put the developed technology to practical use. Company management also means the management of power consumption, which is highly vital both for the construction and maintenance of buildings and structures. The articles also dwell on some possible improvements of managing energy consumption within the framework of the general management of company’s economic sustainability, because these phenomena have a tight organic interdependence. The authors continue researching this direction in order to improve the production efficiency of the proposed technologies as well as to eliminate some drawbacks they have spotted.

  17. Internet of Things technology-based management methods for environmental specimen banks.

    Science.gov (United States)

    Peng, Lihong; Wang, Qian; Yu, Ang

    2015-02-01

    The establishment and management of environmental specimen banks (ESBs) has long been a problem worldwide. The complexity of specimen environment has made the management of ESB likewise complex. Through an analysis of the development and management of ESBs worldwide and in light of the sophisticated Internet of Things (IOT) technology, this paper presents IOT technology-based ESB management methods. An IOT technology-based ESB management system can significantly facilitate ESB ingress and egress management as well as long-term storage management under quality control. This paper elaborates on the design of IOT technology-based modules, which can be used in ESB management to achieve standardized, smart, information-based ESB management. ESB management has far-reaching implications for environmental management and for research in environmental science.

  18. Mixed Methods in Emerging Academic Subdisciplines: The Case of Sport Management

    Science.gov (United States)

    van der Roest, Jan-Willem; Spaaij, Ramón; van Bottenburg, Maarten

    2015-01-01

    This article examines the prevalence and characteristics of mixed methods research in the relatively new subdiscipline of sport management. A mixed methods study is undertaken to evaluate the epistemological/philosophical, methodological, and technical levels of mixed methods design in sport management research. The results indicate that mixed…

  19. Plant management in natural areas: balancing chemical, mechanical, and cultural control methods

    Science.gov (United States)

    Steven Manning; James. Miller

    2011-01-01

    After determining the best course of action for control of an invasive plant population, it is important to understand the variety of methods available to the integrated pest management professional. A variety of methods are now widely used in managing invasive plants in natural areas, including chemical, mechanical, and cultural control methods. Once the preferred...

  20. The Paradigm of the Total Quality Management in the Portuguese Higher Education

    OpenAIRE

    Saraiva, Margarida; Reis, Elizabeth

    2006-01-01

    Total quality management is a process based on a “to do differently” strategy. This strategy implies trying to achieve continuous improvement by sharing responsibilities reducing misused resource and meeting customer’s expectations. Typically, Total Quality Management is implemented in industry and services using a group of principles. The implementation of such principles guides the organizations towards the improvement of quality standards. Deming contributed to the total qua...

  1. Developing management capacity building package to district health manager in northwest of Iran: A sequential mixed method study.

    Science.gov (United States)

    Tabrizi, Jafar Sadegh; Gholipour, Kamal; Farahbakhsh, Mostafa; Jahanbin, Hasan; Karamuz, Majid

    2016-11-01

    To assess districts health managers educational needs and develop management training programmes. This mixed-method study was carried out between August 2014 and August 2015 in Tabriz, Iran. Four focus group discussion sessions and three semi-structured face-to-face interviews were conducted among district health managers and experts of a health centre. Besides, 52 questionnaires were completed to weigh and finalise management education module and courses. Interviews and focus group discussions were tape-recorded, transcribed and analysed using content analysis method. Data was analysed using SPSS17. There were 52 participants, of whom 40(78.8%) were men and 12(21.2%) were women. All of the subjects (100%) took part in the quantitative phase, while 25(48.08%) participated in the qualitative phase. In the qualitative section, 11(44%) participants were heads of unit/departments in provincial health centre and 14(56%) were district health managers. In the quantitative phase, 30(57.7%) participants were district health managers and 8(28.8%) were heads of units/departments. Moreover, 33(63.4%) participants had medical education. The job experience of 3(5.8%) participants in the current position was below five years. Districts health management training programme consisted of 10modules with 53 educational topics. The normalised score out of a total of 100 for rules and ethics was 75.51, health information management 71.19, management and leadership 69.27, district management 68.08, human resources and organisational creativity 67.58,quality improvement 66.6, health resources management 62.37, planning and evaluation 61.87, research in health system 59.15, and community participation was 53.15. Considering district health managers' qualification in health and medicine, they had not been trained in basic management. Almost all the management and leadership courses were prioritised as most necessary.

  2. Methods on TLD management be applicable in nuclear power plantsunder the multi-reactor operational mode

    International Nuclear Information System (INIS)

    Luo Huiyong; Wen Qinghua; Li Ruirong; Yu Enjian

    2006-01-01

    This paper discusses the methods on management of TLD dosimeters adopted in DNMC and other NPPs, analyzes and evaluates their both defects and advantages. Facing the coming of the multi-reactor operational mode applied in NPPs, a new method intelligent management mode is put forward, this optimized method not only assures the accuracy of TLD's measurement but also reduces the cost of production and improves the efficiency of management greatly. (authors)

  3. A method for data base management and analysis for wind tunnel data

    Science.gov (United States)

    Biser, Aileen O.

    1987-01-01

    To respond to the need for improved data base management and analysis capabilities for wind-tunnel data at the Langley 16-Foot Transonic Tunnel, research was conducted into current methods of managing wind-tunnel data and a method was developed as a solution to this need. This paper describes the development of the data base management and analysis method for wind-tunnel data. The design and implementation of the software system are discussed and examples of its use are shown.

  4. Problem-solving and developing quality management methods and techniques on the example of automotive industry

    OpenAIRE

    Jacek Łuczak; Radoslaw Wolniak

    2015-01-01

    The knowledge about methods and techniques of quality management together with their effective use can be definitely regarded as an indication of high organisational culture. Using such methods and techniques in an effective way can be attributed to certain level of maturity, as far as the quality management system in an organisation is concerned. There is in the paper an analysis of problem-solving methods and techniques of quality management in the automotive sector in Poland. The survey wa...

  5. Methodical Approaches to Risk Management in a Regional Commercial Bank

    Directory of Open Access Journals (Sweden)

    Elena Vladimirovna Altukhova

    2016-03-01

    Full Text Available The article presents the results of the research of the methodological and information infrastructure of the integrated risk management in a regional commercial bank. Within the study of the general development tendencies of the regional banking services market, the most significant risks for a regional bank are revealed. The analysis is carried out on the basis of the stress testing technique developed at the Plekhanov Russian University of Economics. It is based on a technique of dynamic economic and mathematical modeling with the application of information technologies. The created combination of the methodological and instrumental tools allows to carry out the dynamic scenario analysis of the activity of a commercial bank for the identification of potential risks and for the development of the strategy of financial management reducing the potential risks and leveling the consequences of their realization. The received tool allows during the computer test to watch the predicted dynamics of the condition of the key indicators of the activity of a regional commercial bank changing under the influence of the exogenous regulatory measures and instruments of bank management applied to decrease risk and at the same time to introduce adjustments in the perspective strategy of management. As the result of the analysis, the universal management model of the main bank risks in a regional commercial bank within three alternative scenarios is created. The software product allowing to develop and acquire the practical skills of the students in banking is developed. It also may help to develop the methodological support for the regulation of the organizational procedures of risk management in a regional commercial bank. The received software product may be used in a system of the improving the professional skills, and also for obtaining the expected data in a risk management system in a regional commercial bank.

  6. Management number identification method for nuclear fuel assembly

    International Nuclear Information System (INIS)

    Furuya, Nobuo; Mori, Kazuma.

    1995-01-01

    In the present invention, a management number indicated to appropriate portions of a fuel assembly can be read with no error for the management of nuclear fuel materials in the nuclear fuel assembly (counting management) and physical protection: PP. Namely, bar codes as a management number are printed by electrolytic polishing to one or more portions of a side surface of an upper nozzle of the assembly, an upper surface of a clamp and a side surface of a lower nozzle. The bar codes are read by a reader at one or more portions in a transporting path for transporting the fuel assembly and at a fuel detection device disposed in a fuel storage pool. The read signals are inputted to a computer. With such procedures, the nuclear fuel assembly can be identified with no error by reading the bar codes and without applying no danger to a human body. Since the reader is disposed in the course of the transportation and test for the assembly, and the read signals are inputted to the computer, the management for the counting number and PP is facilitated. (I.S.)

  7. Methodical Approach to Managing Resources at an Industrial Enterprise

    Directory of Open Access Journals (Sweden)

    Antonets Olga O.

    2013-11-01

    Full Text Available The goal of the article lies in identification of optimal ways of managing material resources of an industrial enterprise on the basis of economic and mathematical modelling. In the process of analysis and systematisation of works of foreign and domestic scientists the article makes a conclusion about the insufficient degree of development of such complex solutions on formation of logistic systems of resource management, which would be simple and adaptive. The article provides results of the study of specific features of resource management at enterprises, among which – surplus (deficit of resources and availability of non-liquid reserves. In order to eliminate shortcomings the article offers a situational order of management with consideration of a possible state of reserves. The article improves the model of selection of the volume of supply of material resources and identifies optimal solutions with consideration of interval uncertainty. The further direction of the study lies in integration of the proposed approach to resource management with the system of financial planning at an industrial enterprise.

  8. Advanced methods of microscope control using μManager software.

    Science.gov (United States)

    Edelstein, Arthur D; Tsuchida, Mark A; Amodaj, Nenad; Pinkard, Henry; Vale, Ronald D; Stuurman, Nico

    μManager is an open-source, cross-platform desktop application, to control a wide variety of motorized microscopes, scientific cameras, stages, illuminators, and other microscope accessories. Since its inception in 2005, μManager has grown to support a wide range of microscopy hardware and is now used by thousands of researchers around the world. The application provides a mature graphical user interface and offers open programming interfaces to facilitate plugins and scripts. Here, we present a guide to using some of the recently added advanced μManager features, including hardware synchronization, simultaneous use of multiple cameras, projection of patterned light onto a specimen, live slide mapping, imaging with multi-well plates, particle localization and tracking, and high-speed imaging.

  9. Advanced methods of microscope control using μManager software

    Directory of Open Access Journals (Sweden)

    Arthur D Edelstein

    2014-07-01

    Full Text Available µManager is an open-source, cross-platform desktop application, to control a wide variety of motorized microscopes, scientific cameras, stages, illuminators, and other microscope accessories. Since its inception in 2005, µManager has grown to support a wide range of microscopy hardware and is now used by thousands of researchers around the world. The application provides a mature graphical user interface and offers open programming interfaces to facilitate plugins and scripts. Here, we present a guide to using some of the recently added advanced µManager features, including hardware synchronization, simultaneous use of multiple cameras, projection of patterned light onto a specimen, live slide mapping, imaging with multi-well plates, particle localization and tracking, and high-speed imaging.

  10. THE USE OF THE PROCESS "MANAGEMENT IDEAS" TO ACHIEVE OBJECTIVES OF THE COMPANY

    Directory of Open Access Journals (Sweden)

    L. B. Likhacheva

    2015-01-01

    Full Text Available Summary. This article proposes a way of dealing with the eighth type of losses (according to the concept of "Lean production" – loss of employee creativity, and a method of involving all employees in the continuous improvement process of the enterprise. This method is the introduction process «Idea Management» into the management system of the factory. The article describes the sequence of steps in this process, identifies inputs and outputs of the process and the interrelation of the considered process with other processes of the management system of industrial enterprises, and also defines goals of the process. The authors concluded that the presence of "Idea management" process in the management system will help to achieve the strategic goals of the company, as the process is directly correlated with the company's goals. Furthermore the algorithm of action for the effective implementation and further management of the process were suggested in accordance with the Deming cycle including methods that should be applied: goal setting for employees and company (plan; employee engagement and motivation (do ; periodic monitoring of achievement of goals (check; assessment of goal achievement, conducting corrective action (act. The authors show that an important condition for successful implementation and further efficient functioning of the process "Management ideas" is the interest of the top management and its constant attention to the ongoing process of activity. The proposed method is universal for all kinds of enterprises. The proposed method allows for a relatively short time to implement and guide the Idea Management process to achieve strategically important goals of the company.

  11. Comparison of approaches to Total Quality Management. Including an examination of the Department of Energy`s position on quality management

    Energy Technology Data Exchange (ETDEWEB)

    Bennett, C.T.

    1994-03-01

    This paper presents a comparison of several qualitatively different approaches to Total Quality Management (TQM). The continuum ranges from management approaches that are primarily standards -- with specific guidelines, but few theoretical concepts -- to approaches that are primarily philosophical, with few specific guidelines. The approaches to TQM discussed in this paper include the International Organization for Standardization (ISO) 9000 Standard, the Malcolm Baldrige National Quality Award, Senge`s the Learning Organization, Watkins and Marsick`s approach to organizational learning, Covey`s Seven Habits of Highly Successful People, and Deming`s Fourteen Points for Management. Some of these approaches (Deming and ISO 9000) are then compared to the DOE`s official position on quality management and conduct of operations (DOE Orders 5700.6C and 5480.19). Using a tabular format, it is shown that while 5700.6C (Quality Assurance) maps well to many of the current approaches to TQM, DOE`s principle guide to management Order 5419.80 (Conduct of Operations) has many significant conflicts with some of the modern approaches to continuous quality improvement.

  12. Ground Penetrating Radar, Magnetic and Compositional Analysis of Sediment Cores and Surface Samples: The Relationships Between Lacustrine Sediments and Holocene Lake- Level and Climate Change at Deming Lake, Minnesota, USA

    Science.gov (United States)

    Murray, R.; Lascu, I.; Plank, C.

    2007-12-01

    Deming Lake is a small (Deming. Cores were sampled continuously at a 1-2 cm resolution and sediment composition (in terms of percent organic matter, carbonate material, and minerogenic residue) was determined via loss on ignition (LOI). Isothermal remanent magnetization (IRM) and anhysteretic remanent magnetization (ARM) were used as proxies of magnetic mineral concentration and grain size. Four lithostratigraphic units were identified and correlated between cores based on these analyses. Changes in GPR facies corroborate the correlation between the two shallow cores. In order to inform our interpretation of down-core variations in magnetic properties and LOI values in terms of variations in lake depth, a suite of over 70 modern sediment samples were collected from the basin and analyzed. LOI compositional variability across the basin was high, with no clear trends related to depth or distance from shore. A sharp decrease in minerogenic content was observed at depths consistent with a predicted wave-base of 0.5 m, but aside from this trend it appears the steep slopes of much of the basin promote gravity driven slumping and mixing of sediments at depth. In the profundal sediments IRM values are routinely 5% higher than in the slope and littoral environments, while ARM/IRM ratios indicate an increase in magnetic grain size with water depth. We infer that an increase in coarse organic material in the shallow-water cores of Deming records a period of aridity (associated with a decrease lake-level less than 2m based on GPR profiles) and/or increased water clarity during the regionally expansive mid-Holocene dry period. We do not see clear evidence of late-Holocene lake level change of a significant magnitude (i.e. >1m). While remanence measurements (especially IRM) often correlate with the LOI residue, interference in the IRM resulting from the dissolution of magnetic minerals casts uncertainty into the reliability of our magnetic measurements as a signal of climate

  13. Teaching Improvement Model Designed with DEA Method and Management Matrix

    Science.gov (United States)

    Montoneri, Bernard

    2014-01-01

    This study uses student evaluation of teachers to design a teaching improvement matrix based on teaching efficiency and performance by combining management matrix and data envelopment analysis. This matrix is designed to formulate suggestions to improve teaching. The research sample consists of 42 classes of freshmen following a course of English…

  14. A Key Management Method for Cryptographically Enforced Access Control

    NARCIS (Netherlands)

    Zych, Anna; Petkovic, Milan; Jonker, Willem; Fernández-Medina, Eduardo; Yagüe, Mariemma I.

    Cryptographic enforcement of access control mechanisms relies on encrypting protected data with the keys stored by authorized users. This approach poses the problem of the distribution of secret keys. In this paper, a key management scheme is presented where each user stores a single key and is

  15. On managing innovation by design : Towards SMART methods

    NARCIS (Netherlands)

    Vermaas, P.E.

    2012-01-01

    In this paper innovation by design is characterised schematically and methodological with the aim of analysing how projects of innovation by design can be managed. First, I approach innovation by design from an engineering perspective, and show that the incorporation of innovation into design

  16. Total Quality Management: A Mindset and Method to Stimulate Change.

    Science.gov (United States)

    Mullen, Janet A.

    1993-01-01

    Provides a review of the total quality management movement and process, and advocates applying it to higher education as a solution to current problems. Customer emphasis, continuous improvement, developing human resources, and using tools for process development are described; and examples from specific academic institutions are included.…

  17. Decision support for natural resource management; models and evaluation methods

    NARCIS (Netherlands)

    Wessels, J.; Makowski, M.; Nakayama, H.

    2001-01-01

    When managing natural resources or agrobusinesses, one always has to deal with autonomous processes. These autonomous processes play a core role in designing model-based decision support systems. This chapter tries to give insight into the question of which types of models might be used in which

  18. Striking the metapopulation balance : mathematical models & methods meet metapopulation management

    NARCIS (Netherlands)

    Etienne, R.S.

    2002-01-01

    There are two buzz words in nature management: fragmentation and connectivity. Not only (rail) roads, but also agricultural, residential and industrial areas fragment previously connected (or even continuous) habitat. Common sense tells us that the answer to habitat fragmentation is

  19. Collaborative assessment and management of suicidality method shows effect

    DEFF Research Database (Denmark)

    Nielsen, Ann Colleen; Alberdi Olano, Francisco Javier Lorenzo; Rosenbaum, Bent

    2011-01-01

    Previous studies confirm the effect of collaborative assessment and management of suicidality (CAMS) in an experimental setup, but there is a need to test CAMS with regard to its effectiveness and feasibility in a real-life clinical context. The purpose of this study was to investigate CAMS in a ...

  20. Design methods and design theory for architectural design management

    NARCIS (Netherlands)

    Achten, H.H.; Otter, den A.F.H.J.; Achten, H.H.; Pels, H.J.

    2008-01-01

    Most parties that an architectural design manager meets in daily practice are engaged to some degree with design. What these parties are actually doing in a project is contingent with the concrete design project. Additionally, each party has some stake, and may employ different strategies to solve

  1. Methods and Management of the Healthy Brain Study: A Large Multisite Qualitative Research Project

    Science.gov (United States)

    Laditka, Sarah B.; Corwin, Sara J.; Laditka, James N.; Liu, Rui; Friedman, Daniela B.; Mathews, Anna E.; Wilcox, Sara

    2009-01-01

    Purpose of the study: To describe processes used in the Healthy Brain project to manage data collection, coding, and data distribution in a large qualitative project, conducted by researchers at 9 universities in 9 states. Design and Methods: Project management protocols included: (a) managing audiotapes and surveys to ensure data confidentiality,…

  2. Methods for cost management during product development: A review and comparison of different literatures

    NARCIS (Netherlands)

    Wouters, M.; Morales, S.; Grollmuss, S.; Scheer, M.

    2016-01-01

    Purpose The paper provides an overview of research published in the innovation and operations management (IOM) literature on 15 methods for cost management in new product development, and it provides a comparison to an earlier review of the management accounting (MA) literature (Wouters & Morales,

  3. Strategic Management: An Evaluation of the Use of Three Learning Methods.

    Science.gov (United States)

    Jennings, David

    2002-01-01

    A study of 46 management students compared three methods for learning strategic management: cases, simulation, and action learning through consulting projects. Simulation was superior to action learning on all outcomes and equal or superior to cases on two. Simulation gave students a central role in management and greater control of the learning…

  4. Merging Methods to Manage Uncertainty: Combining Simulation Modeling and Scenario Planning to Inform Resource Management Under Climate Change

    Science.gov (United States)

    Miller, B. W.; Schuurman, G. W.; Symstad, A.; Fisichelli, N. A.; Frid, L.

    2017-12-01

    Managing natural resources in this era of anthropogenic climate change is fraught with uncertainties around how ecosystems will respond to management actions and a changing climate. Scenario planning (oftentimes implemented as a qualitative, participatory exercise for exploring multiple possible futures) is a valuable tool for addressing this challenge. However, this approach may face limits in resolving responses of complex systems to altered climate and management conditions, and may not provide the scientific credibility that managers often require to support actions that depart from current practice. Quantitative information on projected climate changes and ecological responses is rapidly growing and evolving, but this information is often not at a scale or in a form that is `actionable' for resource managers. We describe a project that sought to create usable information for resource managers in the northern Great Plains by combining qualitative and quantitative methods. In particular, researchers, resource managers, and climate adaptation specialists co-produced a simulation model in conjunction with scenario planning workshops to inform natural resource management in southwest South Dakota. Scenario planning for a wide range of resources facilitated open-minded thinking about a set of divergent and challenging, yet relevant and plausible, climate scenarios and management alternatives that could be implemented in the simulation. With stakeholder input throughout the process, we built a simulation of key vegetation types, grazing, exotic plants, fire, and the effects of climate and management on rangeland productivity and composition. By simulating multiple land management jurisdictions, climate scenarios, and management alternatives, the model highlighted important tradeoffs between herd sizes and vegetation composition, and between the short- versus long-term costs of invasive species management. It also identified impactful uncertainties related to the

  5. Impact of Admission Control Methods to the Traffic Management

    Directory of Open Access Journals (Sweden)

    Filip Chamraz

    2015-01-01

    Full Text Available The paper deals with Admission control methods (AC in IMS networks (IP multimedia subsystem as one of the elements that help ensure QoS (Quality of service. In the paper we are trying to choose the best AC method for selected IMS network node to allow access to the greatest number of users. Of the large number of methods that were tested and considered good we chose two. The paper compares Gaussian approximation method and one of the measurement based method, specifically „Measured Sum“. Both methods estimate effective bandwidth to allow access for the greatest number of users/devices and allow them access to prepaid services or multimedia content.

  6. Strategies, methods and tools for managing nanorisks in construction

    Science.gov (United States)

    López de Ipiña, J. M.; Vaquero, C.; Boutry, D.; Damlencourt, J. F.; Neofytou, P.; Pilou, M.; Jankowska, E.; Larraza, I.; Pina, R.; Fernández, S.; Contreras, S.; Romero, A.; Calderon, M.; Swiezewsk, P.; Otkallo, K.; Pintea, A.; Salazar, C.; Oroz, T.; Hargreaves, B.; Ciobanu, R.; Tabrea, A.; Hazebrouck, B.; Salvi, O.; Stockmann-Juvala, H.; Vaananen, V.; Pui, D. H. Y.; Thompson, Drew

    2015-05-01

    This paper presents a general overview of the work carried out by European project SCAFFOLD (GA 280535) during its 30 months of life, with special emphasis on risk management component. The research conducted by SCAFFOLD is focused on the European construction sector and considers 5 types of nanomaterials (TiO2, SiO2, carbon nanofibres, cellulose nanofibers and nanoclays), 6 construction applications (Depollutant mortars, selfcompacting concretes, coatings, self-cleaning coatings, fire resistant panels and insulation materials) and 26 exposure scenarios, including lab, pilot and industrial scales. The document focuses on the structure, content and operation modes of the Risk Management Toolkit developed by the project to facilitate the implementation of “nano-management” in construction companies. The tool deploys and integrated approach OHSAS 18001 - ISO 31000 and is currently being validated on 5 industrial case studies.

  7. Strategies, methods and tools for managing nanorisks in construction

    International Nuclear Information System (INIS)

    De Ipiña, J M López; Vaquero, C; Boutry, D; Damlencourt, J F; Neofytou, P; Pilou, M; Jankowska, E; Larraza, I; Pina, R; Fernández, S; Contreras, S; Romero, A; Calderon, M; Swiezewsk, P; Otkallo, K; Pintea, A; Salazar, C; Oroz, T; Hargreaves, B; Ciobanu, R

    2015-01-01

    This paper presents a general overview of the work carried out by European project SCAFFOLD (GA 280535) during its 30 months of life, with special emphasis on risk management component. The research conducted by SCAFFOLD is focused on the European construction sector and considers 5 types of nanomaterials (TiO 2 , SiO 2 , carbon nanofibres, cellulose nanofibers and nanoclays), 6 construction applications (Depollutant mortars, selfcompacting concretes, coatings, self-cleaning coatings, fire resistant panels and insulation materials) and 26 exposure scenarios, including lab, pilot and industrial scales. The document focuses on the structure, content and operation modes of the Risk Management Toolkit developed by the project to facilitate the implementation of “nano-management” in construction companies. The tool deploys and integrated approach OHSAS 18001 - ISO 31000 and is currently being validated on 5 industrial case studies. (paper)

  8. Managing electronic records methods, best practices, and technologies

    CERN Document Server

    Smallwood, Robert F

    2013-01-01

    The ultimate guide to electronic records management, featuring a collaboration of expert practitioners including over 400 cited references documenting today's global trends, standards, and best practices Nearly all business records created today are electronic, and are increasing in number at breathtaking rates, yet most organizations do not have the policies and technologies in place to effectively organize, search, protect, preserve, and produce these records. Authored by an internationally recognized expert on e-records in collaboration with leading subject matter experts worldwide

  9. Managing Small-Scale Fisheries : Alternative Directions and Methods

    International Development Research Centre (IDRC) Digital Library (Canada)

    Managing Small-scale Fisheries va plus loin que le champ d'application de la gestion classique des pêches pour aborder d'autres concepts, outils, méthodes et ... Les gestionnaires des pêches, tant du secteur public que du secteur privé, les chargés de cours et les étudiants en gestion des pêches, les organisations et les ...

  10. Optimisation models and solution methods for load management

    Energy Technology Data Exchange (ETDEWEB)

    Gustafsson, Stig-Inge [Linkoeping Univ. (Sweden). Div. of Wood Science and Technology; Roennqvist, Mikael; Claesson, Marcus [Linkoeping Univ. (Sweden). Div. of Optimisation

    2001-02-01

    The electricity market in Sweden has changed during recent years. Electricity for industrial use can nowadays be purchased from a number of competing electricity suppliers. Hence, the price for each kilowatt-hour is significantly lower than just two years ago and the interest for electricity conservation measures has declined. Part of the electricity tariff is, however, almost the same as before, i.e. the demand cost expressed in Swedish Kronor, SEK, for each kilowatt. This has put focus on load management measures in order to decrease this specific cost. Saving one kWh might lead to monetary savings between 0.22 to 914 SEK and this paper shows how to save only those kWh which really save money. A load management system has been installed in a small carpentry factory and the device can turn off equipment due to a certain priority and for a number of minutes each hour. The question is now, what level on the electricity load is optimal in a strict mathematical sense, i.e. how many kW should be set in the load management computer in order to get the best profitability? In this paper we develop a mathematical model which can be used both as a tool to find a best profitable subscription level and as a tool to control the turn of choices. Numerical results from a case study are presented.

  11. Value Chain Development as Alternative Method For Mapping Waste Management

    Directory of Open Access Journals (Sweden)

    Muhammad Saiful Hakim

    2017-06-01

    Full Text Available Solid Waste management begin at the household as waste of consumption and ended as a new form of waste product or recycling. Based on its value chain the subsequent process will have distict differences with manufacturing product. Value chain of manufacturing product will characterize as value added chain along the chain, where every side of the chain will generate positive chain. In the other hand, some parties of waste management value chain will negative value existed. Some parties in this chain will generate negative value solely because they must establish some cost for wipe the waste. Dissimilarities between value chain on product and waste will contribute to discrepancy between parties. Main purpose of this research is to identify value chain from solid waste management using value chain development. Another purpose to accomplished is to resolve discrepancy in value chain.  Research results shown that household is the parties that experiences negative value. To minimize the discrepancies there should be an action towards household

  12. Optimisation models and solution methods for load management

    International Nuclear Information System (INIS)

    Gustafsson, Stig-Inge; Roennqvist, Mikael; Claesson, Marcus

    2001-02-01

    The electricity market in Sweden has changed during recent years. Electricity for industrial use can nowadays be purchased from a number of competing electricity suppliers. Hence, the price for each kilowatt-hour is significantly lower than just two years ago and the interest for electricity conservation measures has declined. Part of the electricity tariff is, however, almost the same as before, i.e. the demand cost expressed in Swedish Kronor, SEK, for each kilowatt. This has put focus on load management measures in order to decrease this specific cost. Saving one kWh might lead to monetary savings between 0.22 to 914 SEK and this paper shows how to save only those kWh which really save money. A load management system has been installed in a small carpentry factory and the device can turn off equipment due to a certain priority and for a number of minutes each hour. The question is now, what level on the electricity load is optimal in a strict mathematical sense, i.e. how many kW should be set in the load management computer in order to get the best profitability? In this paper we develop a mathematical model which can be used both as a tool to find a best profitable subscription level and as a tool to control the turn of choices. Numerical results from a case study are presented

  13. A method of forest management for the planned introduction of intensive husbandry in virgin forest stands

    Science.gov (United States)

    B. Dolezal

    1978-01-01

    The method proposed is derived from long experience of intensive management in forest stands of Central Europe and from our proposal for management in virgin Iranian forests of the Caspian Region. The method establishes the need for systematic planning of stand conversion to insure both sustained yield and the harvesting of sufficient timber to sustain economic...

  14. [DOE method for evaluating environmental and waste management samples: Revision 1, Addendum 1

    International Nuclear Information System (INIS)

    Goheen, S.C.

    1995-04-01

    The US Dapartment of Energy's (DOE's) environmental and waste management (EM) sampling and analysis activities require that large numbers of samples be analyzed for materials characterization, environmental surveillance, and site-remediation programs. The present document, DOE Methods for Evaluating Environmental and Waste Management Samples (DOE Methods), is a supplemental resource for analyzing many of these samples

  15. [DOE method for evaluating environmental and waste management samples: Revision 1, Addendum 1

    Energy Technology Data Exchange (ETDEWEB)

    Goheen, S.C.

    1995-04-01

    The US Dapartment of Energy`s (DOE`s) environmental and waste management (EM) sampling and analysis activities require that large numbers of samples be analyzed for materials characterization, environmental surveillance, and site-remediation programs. The present document, DOE Methods for Evaluating Environmental and Waste Management Samples (DOE Methods), is a supplemental resource for analyzing many of these samples.

  16. 7 CFR 1781.21 - Borrower accounting methods, management, reporting, and audits.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 12 2010-01-01 2010-01-01 false Borrower accounting methods, management, reporting... DEVELOPMENT (RCD) LOANS AND WATERSHED (WS) LOANS AND ADVANCES § 1781.21 Borrower accounting methods, management, reporting, and audits. These activities will be handled in accordance with the provisions of...

  17. 7 CFR 1942.128 - Borrower accounting methods, management reports and audits.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 13 2010-01-01 2009-01-01 true Borrower accounting methods, management reports and audits. 1942.128 Section 1942.128 Agriculture Regulations of the Department of Agriculture (Continued... Rescue and Other Small Community Facilities Projects § 1942.128 Borrower accounting methods, management...

  18. RANGE RAM: a long-term planning method for managing grazing lands

    Science.gov (United States)

    Henricus C. Jansen

    1976-01-01

    Range RAM (Resource Allocation Method) is a computerized planning method designed to assist range managers in developing and selecting alternatives in spatial and temporal allocation of resources. The technique is applicable at the frest or district management levels, or their equivalents. Range RAM can help formulate plans that maximize the production of range outputs...

  19. APPLICATION OF TOTAL QUALITY MANAGEMENT (TQM) SYSTEMS AND PROGRAMS (DEMING/JURAN/SIX SIGMA) TO LOWER INSTRUCTIONAL COST& INCREASE QUALITY OF SERVICE IN COLLEGES OF AGRICULTURE

    OpenAIRE

    Nefstead, Ward E.; Gillard, Steve A.

    2004-01-01

    I. History of the TQM movement II. Nature of the Problem: Escalating Costs of Instruction and Reduced Revenue III. Use of Cause-Effect Analysis (Isikawa Diagrams) IV. DMAIC Analysis and Six Sigma V. Use of Computer Software in DMAIC and Six Sigma VI. Summary and Conclusions

  20. System and method of vehicle operating condition management

    Science.gov (United States)

    Sujan, Vivek A.; Vajapeyazula, Phani; Follen, Kenneth; Wu, An; Moffett, Barty L.

    2015-10-20

    A vehicle operating condition profile can be determined over a given route while also considering imposed constraints such as deviation from time targets, deviation from maximum governed speed limits, etc. Given current vehicle speed, engine state and transmission state, the present disclosure optimally manages the engine map and transmission to provide a recommended vehicle operating condition that optimizes fuel consumption in transitioning from one vehicle state to a target state. Exemplary embodiments provide for offline and online optimizations relative to fuel consumption. The benefit is increased freight efficiency in transporting cargo from source to destination by minimizing fuel consumption and maintaining drivability.

  1. Managing concrete bridges: Methods for reducing costs and user inconveniences

    DEFF Research Database (Denmark)

    Goltermann, Per

    2005-01-01

    The paper presents experiences from modern bridge maintenance management, which has been forced to develop new and cost-efficient approaches in order to cope with the increase in overall deterioration of the aging bridge stock, the growing requirements to accessibility and the decreasing budgets...... situations often postpone or reduce the repair and rehabilitation activities required in critical parts of the structure. The paper will present some cases, where these approaches have been used on existing concrete bridges and explain how these experiences can be applied on other types of structures...

  2. Methods for evaluating riparian habitats with applications to management

    Science.gov (United States)

    Platts, William S.; Armour, C.L.; Booth, G.D.; Bryant, M.; Bufford, J.L.; Cuplin, P.; Jensen, S.; Lienkaemper, G.W.; Minshall, G.W.; Monsen, S.T.; Nelson, R.L.; Sedell, J.R.; Tuhy, J.S.

    1987-01-01

    Riparian area planning and management is a major national issues today--something that should have been the case a century ago. A century of additive effects of land use has resulted in major impacts on many riparian stream habitats and their fisheries, wildlife, and domestic livestock use. Before scientists can evaluate the influences of various land and water uses on riparian environments, they must first understand these environments. This means being able to detect and measure with confidence the natural and artificial variation and instantaneous conditions of the riparian habitat. These conditions must then be related to the production capability of riparian habitat and any extraneous factors affecting this production potential.

  3. Management methods ash from combustion of biomass. Review of productions and associated methods. Extended abstract

    International Nuclear Information System (INIS)

    Boulday, D.; Marcovecchio, F.

    2016-02-01

    The study deals with the management of biomass ashes from industrial and collective facilities (wood log excluded) and provides a state of the art, in France and in Europe, flows, methods of recovery and post-treatment, physico-chemical characteristics and programs for new opportunities. Currently, flows of biomass ash are estimated at 110 kt-330 kt in France and 1 500 kt - 4 500 kt in Europe and should amount respectively 330 kt-1000 kt and 3100 kt-8000 kt in 2020. The physical and chemical composition of biomass ash is influenced by many factors: fuel, pretreatment, post-treatment, additives, fly and bottom ash, power installation, type of combustion equipment, extraction mode...However, these ashes have characteristics which are commonly accepted: liming / neutralizing power, fertilizer, pozzolanic behavior generally almost zero. In France and Europe, a distinction is made between fly and bottom ashes, usually less polluted. However, this separation does not always make sense according to the valuation mode, the type of equipment (including fluidized bed or grid) or mixtures of ash made in the plant (e.g. mix of bottom and coarse ash). Currently, the main outlet is ash landfill, followed by agricultural and forestry recycling. The other identified opportunities concern a few countries and marginal flows: brick-works, road engineering... The development of biomass energy, coupled with a reduction in landfill options, has given rise to many research and demonstration programs in recent years, particularly in France, with some promising solutions. Many limiting factors, which can be different according to opportunities, have been identified. More or less advanced solutions aimed at reducing the harmful effects of these factors (slaking lime, sorting, grinding...).However to date, the most robust and massive solution for ash recycling material remains undoubtedly the agricultural recycling. According to the study, it's necessary to consolidate the agricultural

  4. Application of the taguchi method in change management

    Directory of Open Access Journals (Sweden)

    Kata Ivić

    2011-07-01

    Full Text Available Application of the Taguchi methods results in efficient optimization of performance, quality and price, fast and accurate gathering of technical information, design and production of highly reliable products and processes at low prices, development of flexible technologies for designing of a whole group of high quality associated products. All this significantly reduces the duration of research, development and delivery. The most frequent use of the Taguchi methods is to improve existing products and production processes and to reduce the need for experiments. The Taguchi methods is a system of quality engineering which puts more emphasis on reduction of production costs and giving advantage to efficient use of engineering strategies than on the use of advanced statistical methods.

  5. A loading pattern optimization method for nuclear fuel management

    International Nuclear Information System (INIS)

    Argaud, J.P.

    1997-01-01

    Nuclear fuel reload of PWR core leads to the search of an optimal nuclear fuel assemblies distribution, namely of loading pattern. This large discrete optimization problem is here expressed as a cost function minimization. To deal with this problem, an approach based on gradient information is used to direct the search in the patterns discrete space. A method using an adjoint state formulation is then developed, and final results of complete patterns search tests by this method are presented. (author)

  6. CONSIDERATIONS ON RISK MANAGEMENT APPLIED TO FOREST FIRES

    Directory of Open Access Journals (Sweden)

    Ioan Valentin Marcel Posea

    2016-07-01

    Full Text Available Forest risk and management are ubiquitous in any socio-economic activity. Forestry, more than any other field, is at risk from fire. Consequently, it appears the necessity to implement a fire risk management that could resolve, at least partially, the specific problems. This study attempts to identify the specific stages and processes of forest fire risk management and their content. At the same time, I will try to highlight how a forest fire risk management process planning can be achieved and to present a way of achieving the Plan. I also deem necessary a forest fire risk monitoring and control system that I have built using the Deming cycle.

  7. Risk management for engineering projects procedures, methods and tools

    CERN Document Server

    Munier, Nolberto

    2014-01-01

    Many people see risk in engineering projects as an imprecise and nebulous problem - something that exists, is feared and is impossible to deal with. Nothing could be further from the truth. While risk is certainly ubiquitous, sometimes difficult to detect, and cannot always be completely avoided, it can generally be mitigated, reduced or prevented through timely analysis and action.   This book covers the entire process of risk management by providing methodologies for determining the sources of project risk, and once threats have been identified, managing them through:   ·         identification and assessment (probability, relative importance, variables, risk breakdown structure, etc.) ·         implementation of measures for their prevention, reduction or mitigation ·         evaluation of impacts and quantification of risks ·         establishment of control measures   It also considers sensitivity analysis to determine the influence of uncertain parameters values ...

  8. Evaluation of Sustainable Practices within Project Management Methods

    Directory of Open Access Journals (Sweden)

    Shah Satya

    2017-01-01

    Full Text Available The purpose of this research study is to investigate some of the sustainable practices within projects with a focus on social projects. The different research methodologies applied through this research consisted both primary and secondary research, including literature review and through case study. The stakeholder’s behavioural needs towards acting and implementing sustainable practices led to the adoption of sustainable practices within projects which are managed across profit and non-profit organisations. Nevertheless, lack of sustainable behaviour was outlined, and henceforth the integration of sustainable development within social projects is crucially important as such projects were identified as the drivers toward educating the society in order to help to produce generations of people who would be more sustainably aware. Currently, sustainable development is very often taken into account when it comes to managing projects. Nevertheless, if the adoption of sustainable practices is well established in some sectors such as construction, literature tends to demonstrate a lack of information regarding other sectors, especially within social projects. This research aims to investigate the adoption of sustainable practices within social projects and therefore to satisfy a literature gap.

  9. APPLICATION OF METHODS OF LOGISTICS AND PROJECT MANAGEMENT FOR THE CONSTRUCTION OF MANAGEMENT MODEL OF BUSINESS PROCESSES IN THE NETWORK

    Directory of Open Access Journals (Sweden)

    Наталія Іванівна ЧУХРАЙ

    2016-02-01

    Full Text Available In terms of the dynamic development of network economy for effective decision-making managers of enterprises should be combined methods of logistics and project management to obtain the positive synergistic effect. It is shown that the basis of objective measures aimed at minimizing transaction costs. Solving this problem is associated with the development of the structural shell of business enterprises, which continue to evolve rapidly. Organization joint coordinated work in the same virtual information field together geographically separated users opens up entirely new possibilities for improving the mechanisms of project management and logistics. It was reviewed the evolution tool of business process and identified key business processes in networks. The analysis of support for business processes in logistics networks contains a list of basic management mechanisms. It was developed the model of economic and mathematical business process management in structural shell business. The semantic content of the objective function is to minimize transaction costs.

  10. Perspectives on nuclear material safety management methods at DOE sites

    International Nuclear Information System (INIS)

    Hyder, M.L.

    1997-01-01

    The management of nuclear materials, and fissile materials in particular, at the USDOE facilities is undergoing significant changes. These result in large part from decreasing requirements for these materials in the US weapons program. Not only is new production no longer required, but returns must be handled and safely stored. Eventually surplus fissile material will be used for power production, or else put into a form suitable for long term disposition. In the meanwhile concentrates must be stored with protection against releases of radioactive material to the environment, and also against theft or deliberate dispersion. In addition, cleaning up large volumes of materials contaminated with fissile isotopes will be a major activity, and there will also be some quantity of spent fuel containing enriched uranium that cannot readily be processed. All these activities pose safety problems, some of which are addressed here

  11. Economic evaluations in pain management: principles and methods.

    Science.gov (United States)

    Asche, Carl V; Seal, Brian; Jackson, Kenneth C; Oderda, Gary M

    2006-01-01

    This paper describes how investigators may design, conduct, and report economic evaluations of pharmacotherapy for pain and symptom management. Because economic evaluation of therapeutic interventions is becoming increasingly important, there is a need for guidance on how economic evaluations can be optimally conducted. The steps required to conduct an economic evaluation are described to provide this guidance. Economic evaluations require two or more therapeutic interventions to be compared in relation to costs and effects. There are five types of economic evaluations, based on analysis of: (1) cost-effectiveness, (2) cost-utility, (3) cost-minimization, (4) cost-consequence, and (5) cost-benefit analyses. The six required steps are: identify the perspective of the study; identify the alternatives that will be compared; identify the relevant costs and effects; determine how to collect the cost and effect data; determine how to perform calculation for cost and effects data; and determine the manner in which to depict the results and draw comparisons.

  12. Isotope methods in water resources assessment and environmental management

    International Nuclear Information System (INIS)

    Araguas-Araguas, L.

    1996-01-01

    Availability of water and protection of water resources have become top environmental issues in many countries. Governments are forced to issue strict guidelines to protect the environment and create agencies to pursue these aspects as well as enforce such regulations. The supply of good-quality water from rivers and lakes is becoming a costly and complex problem for many institutes responsible for water supply. Because of the high pollution levels in surface waters, ground water is the main source of drinking water in many countries. It is estimated that 1.5 billion people world-wide depend on it for drinking water. Since ground water cannot be directly measured, and despite its importance for drinking purposes there is not enough public concern about its protection. In other cases, it is found that the exploited ground water is not a renewable resource. In many countries in arid and semi-arid regions, fossil ground water is being tapped for extensive agricultural development, but such extraction depletes the reserves, in the same way as an oil reservoir. The availability of correct information, before decisions are taken will lead to improved management of water resources, distributing the available resources for different uses according to their quality, and ultimately, to manage the resource. Nuclear science has developed a series of methodologies based on the use of naturally-occurring isotopes and artificial tracers to study the processes involved in the occurrence and circulation of water. The discipline called 'Isotope Hydrology' provides a deep insight into many parts of the water cycle; from the evaporation over the ocean or the continents, to the formation of surface runoff and ground water and in the discharge of aquifer systems into the ocean. Isotope hydrology, as a scientific and applied discipline in earth sciences, was created during the late 1950s and early 1960s, beyond the classical hydrological science. In these early stages, new methodologies

  13. A study of best management practices for enhancing productivity in building projects: construction methods perspectives

    OpenAIRE

    Gurmu, Argaw Tarekegn; Aibinu, Ajibade Ayodeji; Chan, Toong Khuan

    2016-01-01

    This research investigates management practices that have the potential to enhance productivity in building projects by focusing on construction methods. In phase 1 of the study, face-to-face interviews with nineteen experts were conducted to identify the best management practices for construction methods. The qualitative data analysis reached saturation and resulted in a list of best practices for construction methods that are relevant to the local industry. The second phase used an industry...

  14. [Adverse events management. Methods and results of a development project].

    Science.gov (United States)

    Rabøl, Louise Isager; Jensen, Elisabeth Brøgger; Hellebek, Annemarie H; Pedersen, Beth Lilja

    2006-11-27

    This article describes the methods and results of a project in the Copenhagen Hospital Corporation (H:S) on preventing adverse events. The aim of the project was to raise awareness about patients' safety, test a reporting system for adverse events, develop and test methods of analysis of events and propagate ideas about how to prevent adverse events. H:S developed an action plan and a reporting system for adverse events, founded an organization and developed an educational program on theories and methods of learning from adverse events for both leaders and employees. During the three-year period from 1 January 2002 to 31 December 2004, the H:S staff reported 6011 adverse events. In the same period, the organization completed 92 root cause analyses. More than half of these dealt with events that had been optional to report, the other half events that had been mandatory to report. The number of reports and the front-line staff's attitude towards reporting shows that the H:S succeeded in founding a safety culture. Future work should be centred on developing and testing methods that will prevent adverse events from happening. The objective is to suggest and complete preventive initiatives which will help increase patient safety.

  15. Disruption Management in the Airline Industry - Concepts, Models and Methods

    DEFF Research Database (Denmark)

    Clausen, Jens; Larsen, Allan; Larsen, Jesper

    2005-01-01

    the reality faced in operations control and the decision support offered by the commercial it-systems targeting the recovery process. Though substantial achievements have been made with respect to solution methods, and hardware has become much more powerful, even the most advanced prototype systems...

  16. SPECIFIC MANAGEMENT AND LEADING METHODS APPLIED TO BUTTERFLY TOURISM FOR 2012

    Directory of Open Access Journals (Sweden)

    Eugenia ALECU

    2013-12-01

    Full Text Available In this paper are explained the most important management elements for managers and employees of a tour operator agency. The study showed in a concrete and realistic manner how a manager of a tour operator agency can lead, control, predict and determine the prospects utilizing a specific management method called dashboard. Given the competition in the field of tourism, Butterfly Tourism is trying to manage its business in a professional manner and offer attractive packages and favorable prices to its customers.

  17. Targeting sediment management strategies using sediment quantification and fingerprinting methods

    Science.gov (United States)

    Sherriff, Sophie; Rowan, John; Fenton, Owen; Jordan, Phil; hUallacháin, Daire Ó.

    2016-04-01

    Cost-effective sediment management is required to reduce excessive delivery of fine sediment due to intensive land uses such as agriculture, resulting in the degradation of aquatic ecosystems. Prioritising measures to mitigate dominant sediment sources is, however, challenging, as sediment loss risk is spatially and temporally variable between and within catchments. Fluctuations in sediment supply from potential sources result from variations in land uses resulting in increased erodibility where ground cover is low (e.g., cultivated, poached and compacted soils), and physical catchment characteristics controlling hydrological connectivity and transport pathways (surface and/or sub-surface). Sediment fingerprinting is an evidence-based management tool to identify sources of in-stream sediments at the catchment scale. Potential sediment sources are related to a river sediment sample, comprising a mixture of source sediments, using natural physico-chemical characteristics (or 'tracers'), and contributions are statistically un-mixed. Suspended sediment data were collected over two years at the outlet of three intensive agricultural catchments (approximately 10 km2) in Ireland. Dominant catchment characteristics were grassland on poorly-drained soils, arable on well-drained soils and arable on moderately-drained soils. High-resolution (10-min) calibrated turbidity-based suspended sediment and discharge data were combined to quantify yield. In-stream sediment samples (for fingerprinting analysis) were collected at six to twelve week intervals, using time-integrated sediment samplers. Potential sources, including stream channel banks, ditches, arable and grassland field topsoils, damaged road verges and tracks were sampled, oven-dried (account for particle size and organic matter selectivity processes. Contributions from potential sources type groups (channel - ditches and stream banks, roads - road verges and tracks, fields - grassland and arable topsoils) were

  18. Utilizing on-farm best management practices: Managing Nitrate Leaching Using Evapotranspiration Based Irrigation Methods

    Science.gov (United States)

    Zaragosa, I.; Melton, F. S.; Dexter, J.; Post, K.; Haffa, A.; Kortman, S.; Spellenberg, R.; Cahn, M.

    2017-12-01

    In efforts to provide tools to allow farmers to optimize and quantify water usage and fertilizer applications, University of California Cooperative Extension (UCCE) developed the CropManage irrigation and nitrogen scheduling tool that provides real time evapotranspiration (ETc) based irrigation recommendations and fertilizer recommendations on a per field basis. CropManage incorporates satellite based estimates of fractional cover from web data services from the Satellite Irrigation Management Information Support (SIMS) system developed by NASA Ames Research Center in collaboration with California State University Monterey Bay (CSUMB). In this study, we conducted field trials to quantify the benefits of using these tools to support best management practices (BMPs) for irrigation and nutrient management in strawberries and lettuce in the Salinas Valley, California. We applied two different irrigation treatments based on full replacement (100%) of crop evapotranspiration (ETc), and irrigation at 130% of ETc replacement to approximate irrigation under business as usual irrigation management. Both field studies used a randomized block design with four replicates each. We used CropManage to calculate the 100% and 130% ETc replacement requirements prior to each irrigation event. We collected drainage volume and samples and analyzed them for 8500 to nitrate as (NO3-) concentrations. Experimental results for both strawberries and lettuce showed a significant decrease in the percentage of applied nitrogen leached for the 100% ETc replacement treatment against the 130% ETc replacement treatment. For strawberries, we observed that 24% of applied nitrogen was leached under the 100% ETc replacement treatment, versus 51% of applied nitrogen that was leached under the 130% ETc replacement treatment. For lettuce, we observe that 2% of the applied nitrogen leached bellow the soil profile, versus 6% of the applied nitrogen for the 130%ETc replacement treatment. In both experiments

  19. Optimal management strategies in variable environments: Stochastic optimal control methods

    Science.gov (United States)

    Williams, B.K.

    1985-01-01

    Dynamic optimization was used to investigate the optimal defoliation of salt desert shrubs in north-western Utah. Management was formulated in the context of optimal stochastic control theory, with objective functions composed of discounted or time-averaged biomass yields. Climatic variability and community patterns of salt desert shrublands make the application of stochastic optimal control both feasible and necessary. A primary production model was used to simulate shrub responses and harvest yields under a variety of climatic regimes and defoliation patterns. The simulation results then were used in an optimization model to determine optimal defoliation strategies. The latter model encodes an algorithm for finite state, finite action, infinite discrete time horizon Markov decision processes. Three questions were addressed: (i) What effect do changes in weather patterns have on optimal management strategies? (ii) What effect does the discounting of future returns have? (iii) How do the optimal strategies perform relative to certain fixed defoliation strategies? An analysis was performed for the three shrub species, winterfat (Ceratoides lanata), shadscale (Atriplex confertifolia) and big sagebrush (Artemisia tridentata). In general, the results indicate substantial differences among species in optimal control strategies, which are associated with differences in physiological and morphological characteristics. Optimal policies for big sagebrush varied less with variation in climate, reserve levels and discount rates than did either shadscale or winterfat. This was attributed primarily to the overwintering of photosynthetically active tissue and to metabolic activity early in the growing season. Optimal defoliation of shadscale and winterfat generally was more responsive to differences in plant vigor and climate, reflecting the sensitivity of these species to utilization and replenishment of carbohydrate reserves. Similarities could be seen in the influence of both

  20. A method of environmental management for landfill evaluation

    International Nuclear Information System (INIS)

    Zapata Munoz, Andres Felipe; Zapata Sanchez, Carmen Elena

    2013-01-01

    From the description of the activities of the operation of the landfill and environmental farm Los Saltos and the physicochemical characterization of its leachate, a method of environmental assessment was proposed. It includes an analysis of interactions as a diagnostic tool for the development of a cause-effect matrix to identify the impacts on associated environmental components. With this information, it was developed a matrix of importance where impacts were classified as critical, severe, moderate and irrelevant. A qualitative assessment of environmental impact was then carried out to help identify the most impacting activities as well as the most affected parameters. As a result of this method, it was determined that the operation of a landfill has a greater impact on the physical and biotic components of the environment, producing effects such as impaired air quality, loss of aquatic species and terrestrial flora, alteration of the hydrological cycle, and deterioration of surface and groundwater quality.

  1. Evaluation of destructive methods for managing decontamination wastes

    International Nuclear Information System (INIS)

    Piciulo, P.L.; Adams, J.W.

    1986-01-01

    Results are discussed of a laboratory evaluation of destructive methods for processing chemical decontamination wastes. Incineration, acid digestion and wet-air oxidation are capable of degrading decontamination reagents and organic ion-exchange resins. The extent of destruction as a function of operating parameters was waste specific. The reagents used in the testing were: EDTA, oxalic acid, citric acid, picolinic acid and LND-101A

  2. Percutaneous Method of Management of Simple Bone Cyst

    Directory of Open Access Journals (Sweden)

    O. P. Lakhwani

    2013-01-01

    Full Text Available Introduction. Simple bone cyst or unicameral bone cysts are benign osteolytic lesions seen in metadiaphysis of long bones in growing children. Various treatment modalities with variable outcomes have been described in the literature. The case report illustrates the surgical technique of minimally invasive method of treatment. Case Study. A 14-year-old boy was diagnosed as active simple bone cyst proximal humerus with pathological fracture. The patient was treated by minimally invasive percutaneous curettage with titanium elastic nail (TENS and allogenic bone grafting mixed with bone marrow under image intensifier guidance. Results. Pathological fracture was healed and allograft filled in the cavity was well taken up. The patient achieved full range of motion with successful outcome. Conclusion. Minimally invasive percutaneous method using elastic intramedullary nail gives benefit of curettage cyst decompression and stabilization of fracture. Allogenic bone graft fills the cavity and healing of lesion by osteointegration. This method may be considered with advantage of minimally invasive technique in treatment of benign cystic lesions of bone, and the level of evidence was therapeutic level V.

  3. Percutaneous Method of Management of Simple Bone Cyst

    Science.gov (United States)

    Lakhwani, O. P.

    2013-01-01

    Introduction. Simple bone cyst or unicameral bone cysts are benign osteolytic lesions seen in metadiaphysis of long bones in growing children. Various treatment modalities with variable outcomes have been described in the literature. The case report illustrates the surgical technique of minimally invasive method of treatment. Case Study. A 14-year-old boy was diagnosed as active simple bone cyst proximal humerus with pathological fracture. The patient was treated by minimally invasive percutaneous curettage with titanium elastic nail (TENS) and allogenic bone grafting mixed with bone marrow under image intensifier guidance. Results. Pathological fracture was healed and allograft filled in the cavity was well taken up. The patient achieved full range of motion with successful outcome. Conclusion. Minimally invasive percutaneous method using elastic intramedullary nail gives benefit of curettage cyst decompression and stabilization of fracture. Allogenic bone graft fills the cavity and healing of lesion by osteointegration. This method may be considered with advantage of minimally invasive technique in treatment of benign cystic lesions of bone, and the level of evidence was therapeutic level V. PMID:23819089

  4. A DOE manual: DOE Methods for Evaluating Environmental and Waste Management Samples

    International Nuclear Information System (INIS)

    Goheen, S.C.; McCulloch, M.; Riley, R.G.

    1994-01-01

    Waste Management inherently requires knowledge of the waste's chemical composition. The waste can often be analyzed by established methods; however, if the samples are radioactive, or are plagued by other complications, established methods may not be feasible. The US Department of Energy (DOE) has been faced with managing some waste types that are not amenable to standard or available methods, so new or modified sampling and analysis methods are required. These methods are incorporated into DOE Methods for Evaluating Environmental and Waste Management Samples (DOE Methods), which is a guidance/methods document for sampling and analysis activities in support of DOE sites. It is a document generated by consensus of the DOE laboratory staff and is intended to fill the gap within existing guidance documents (e. g., the Environmental Protection Agency's (EPA's) Test Methods for Evaluating Solid Waste, SW-846), which apply to low-level or non-radioactive samples. DOE Methods fills the gap by including methods that take into account the complexities of DOE site matrices. The most recent update, distributed in October 1993, contained quality assurance (QA), quality control (QC), safety, sampling, organic analysis, inorganic analysis, and radioanalytical guidance as well as 29 methods. The next update, which will be distributed in April 1994, will contain 40 methods and will therefore have greater applicability. All new methods are either peer reviewed or labeled ''draft'' methods. Draft methods were added to speed the release of methods to field personnel

  5. THE METHOD OF MANAGEMENT WOMEN WITH ISTHMIC-CERVICAL INSUFFICIENCY

    Directory of Open Access Journals (Sweden)

    Мария Сергеевна Воронцова

    2018-01-01

    Full Text Available Isthmic-cervical insufficiency (ICI is one of the most common causes of spontaneous premature births. In II trimester of pregnancy in the structure of miscarriages, the share of ICI accounts for about 40 % of cases. The purpose – evaluate the effectiveness of the complex method of correction of isthmic-cervical insufficiency. Materials and methods. A simple, open, prospective, randomized study was performed on the basis of the City Clinical Perinatal Center in Omsk. Under observation, there were 60 patients aged 18-40 years in gestation period of 13-33 weeks 6 days with a proven diagnosis of «isthmic-cervical insufficiency». The main group included 30 patients who received treatment with a new combined method: the obstetric pessary «CVK», which differs from the analogues by a more anatomical ellipsoidal form and an increased number of perforations to improve the outflow of vaginal secretions in combination with intravaginal injection of micronized progesterone in a dosage of 100 mg 2 times a day and a drug normalizing the biocenosis of the vagina, as a lyophilized culture of lactobacilli L. casei rhamnosus Doderleini in a dosage of 340 mg, 1 capsule intravaginally at night 2 times a week. The comparison group consisted of 30 patients who received treatment: obstetric silicone pessary + micronized progesterone at a dosage of 200 mg per day intravaginally. The outcomes of pregnancy and childbirth were evaluated. Results. The total number of premature births in the main group was 4 (13.3 % compared to 12 (40 % in the comparison group (p = 0,023. Based on the results of the study, a statistically significant reduction in patients with recurrent vaginal flora (p = 0,0001 was obtained and, due to a decrease in this indicator, a general decrease in the number of women with complications of pregnancy was registered (p = 0,019. The conclusion. The proposed method of correction of isthmic-cervical insufficiency is more effective

  6. Managing visitor impacts in parks: A multi-method study of the effectiveness of alternative management practices

    Science.gov (United States)

    Park, L.O.; Marion, J.L.; Manning, R.E.; Lawson, S.R.; Jacobi, C.

    2008-01-01

    How can recreation use be managed to control associated environmental impacts? What management practices are most effective and why? This study explored these and related questions through a series of experimental ?treatments? and associated ?controls? at the summit of Cadillac Mountain in Acadia National Park, a heavily used and environmentally fragile area. The treatments included five management practices designed to keep visitors on maintained trails, and these practices ranged from ?indirect? (information/education) to ?direct? (a fence bordering the trail). Research methods included unobtrusive observation of visitors to determine the percentage of visitors who walked off-trail and a follow-up visitor survey to explore why management practices did or didn?t work. All of the management practices reduced the percentage of visitors who walked off-trail. More aggressive applications of indirect practices were more effective than less aggressive applications, and the direct management practice of fencing was the most effective of all. None of the indirect management practices reduced walking off-trail to a degree that is likely to control damage to soil and vegetation at the study site. Study findings suggest that an integrated suite of direct and indirect management practices be implemented on Cadillac Mountain (and other, similar sites) that includes a) a regulation requiring visitors to stay on the maintained trail, b) enforcement of this regulation as needed, c) unobtrusive fencing along the margins of the trail, d) redesign of the trail to extend it, widen it in key places, and provide short spur trails to key ?photo points?, and e) an aggressive information/education program to inform visitors of the regulation to stay on the trail and the reasons for it. These recommendations are a manifestation of what may be an emerging principle of park and outdoor recreation management: intensive use requires intensive management.

  7. A Novel Resource Management Method of Providing Operating System as a Service for Mobile Transparent Computing

    Directory of Open Access Journals (Sweden)

    Yonghua Xiong

    2014-01-01

    Full Text Available This paper presents a framework for mobile transparent computing. It extends the PC transparent computing to mobile terminals. Since resources contain different kinds of operating systems and user data that are stored in a remote server, how to manage the network resources is essential. In this paper, we apply the technologies of quick emulator (QEMU virtualization and mobile agent for mobile transparent computing (MTC to devise a method of managing shared resources and services management (SRSM. It has three layers: a user layer, a manage layer, and a resource layer. A mobile virtual terminal in the user layer and virtual resource management in the manage layer cooperate to maintain the SRSM function accurately according to the user’s requirements. An example of SRSM is used to validate this method. Experiment results show that the strategy is effective and stable.

  8. A novel resource management method of providing operating system as a service for mobile transparent computing.

    Science.gov (United States)

    Xiong, Yonghua; Huang, Suzhen; Wu, Min; Zhang, Yaoxue; She, Jinhua

    2014-01-01

    This paper presents a framework for mobile transparent computing. It extends the PC transparent computing to mobile terminals. Since resources contain different kinds of operating systems and user data that are stored in a remote server, how to manage the network resources is essential. In this paper, we apply the technologies of quick emulator (QEMU) virtualization and mobile agent for mobile transparent computing (MTC) to devise a method of managing shared resources and services management (SRSM). It has three layers: a user layer, a manage layer, and a resource layer. A mobile virtual terminal in the user layer and virtual resource management in the manage layer cooperate to maintain the SRSM function accurately according to the user's requirements. An example of SRSM is used to validate this method. Experiment results show that the strategy is effective and stable.

  9. Control Methods for Energy Management of Refrigeration Systems

    DEFF Research Database (Denmark)

    Shafiei, Seyed Ehsan

    is decreased as the method does not need an explicit model of the system and, at the same time, the desired load following performance is attained. Recent research findings indicate that the refrigeration system commonly employed in food transportation can account for 40% of the total greenhouse gas emissions...... from the corresponding vehicle engines. Finally, the problem of optimization of a hybrid transport refrigeration system is addressed here. The hybrid refrigeration system is made by the integration of conventional refrigeration technology with thermal energy storage devices....

  10. Research on the Method of Enterprise Knowledge Management Based on Web 2.0

    Directory of Open Access Journals (Sweden)

    Le Chengyi

    2017-06-01

    Full Text Available [Purpose/significance] It is the key for the research of enterprise knowledge management to improve the efficiency of enterprise knowledge management by using the advantages of Web 2.0, such as its fastness, public participation and strong interaction. [Method/process] Based on the analysis of the characteristics and main technologies of Web 2.0, this paper discussed the role and application of Web 2.0 related technologies in the enterprise knowledge management, and then put forward the enterprise knowledge management methods based on Web 2.0, including knowledge acquisition method, knowledge classification and organization method, knowledge sharing and evaluation method by usingWeb2 .0. [Result/conclusion] Through the introduction of Web 2.0 related technologies into the knowledge management of enterprises, the research provides convenient and low-cost tools and methods for knowledge management related activities, and helps all users to participate in enterprise knowledge management activities quickly and easily.

  11. Applying the Delphi method to assess impacts of forest management on biodiversity and habitat preservation

    DEFF Research Database (Denmark)

    Filyushkina, Anna; Strange, Niels; Löf, Magnus

    2018-01-01

    This study applied a structured expert elicitation technique, the Delphi method, to identify the impacts of five forest management alternatives and several forest characteristics on the preservation of biodiversity and habitats in the boreal zone of the Nordic countries. The panel of experts...... as a valuable addition to on-going empirical and modeling efforts. The findings could assist forest managers in developing forest management strategies that generate benefits from timber production while taking into account the trade-offs with biodiversity goals....

  12. Mixed Methods in Emerging Academic Subdisciplines : The Case of Sport Management

    NARCIS (Netherlands)

    van der Roest, Jan Willem; Spaaij, Ramón; van Bottenburg, Maarten

    2015-01-01

    This article examines the prevalence and characteristics of mixed methods research in the relatively new subdiscipline of sport management. A mixed methods study is undertaken to evaluate the epistemological/philosophical, methodological, and technical levels of mixed methods design in sport

  13. Mixed methods in emerging academic subdisciplines: the case of sport management

    NARCIS (Netherlands)

    van der Roest, J.-W.; Spaaij, R.; van Bottenburg, M.

    2015-01-01

    This article examines the prevalence and characteristics of mixed methods research in the relatively new subdiscipline of sport management. A mixed methods study is undertaken to evaluate the epistemological/philosophical, methodological, and technical levels of mixed methods design in sport

  14. Developing a model of quality management methods and evaluating their effects on business performance

    NARCIS (Netherlands)

    Zhang, ZH

    From an extensive review of the total quality management (TQM) literature, a model of quality management methods (QMMs) was developed. The model has 83 QMMs which are categorized by the 11 TQM elements they primarily aim to improve. Ten manufacturing companies which were renowned for quality

  15. Pest management in Douglas-fir seed orchards: a microcomputer decision method

    Science.gov (United States)

    James B. Hoy; Michael I. Haverty

    1988-01-01

    The computer program described provides a Douglas-fir seed orchard manager (user) with a quantitative method for making insect pest management decisions on a desk-top computer. The decision system uses site-specific information such as estimates of seed crop size, insect attack rates, insecticide efficacy and application costs, weather, and crop value. At sites where...

  16. IMPLEMENTATION OF QUALITATIVE RULES IN COMPANY`S INFORMATION MANAGEMENT

    Directory of Open Access Journals (Sweden)

    Anna WOLNOWSKA

    2012-07-01

    Full Text Available In the article there were presented chosen issues of quality management. Important role of information and work processes in companies were emphasized . Based on eight rules of quality management, TQM standards and ideas of discipline pioneers like Deming, Juran, Crosby and Shewart, author has constructed way of using chosen rules and assumptions to company`s information circulation. Analogy, suggested by author, has not only emphasized importance of information as a company`s resource, but also has pointed to possibility of improving ways of managing this information.

  17. Survey of systems safety analysis methods and their application to nuclear waste management systems

    International Nuclear Information System (INIS)

    Pelto, P.J.; Winegardner, W.K.; Gallucci, R.H.V.

    1981-11-01

    This report reviews system safety analysis methods and examines their application to nuclear waste management systems. The safety analysis methods examined include expert opinion, maximum credible accident approach, design basis accidents approach, hazard indices, preliminary hazards analysis, failure modes and effects analysis, fault trees, event trees, cause-consequence diagrams, G0 methodology, Markov modeling, and a general category of consequence analysis models. Previous and ongoing studies on the safety of waste management systems are discussed along with their limitations and potential improvements. The major safety methods and waste management safety related studies are surveyed. This survey provides information on what safety methods are available, what waste management safety areas have been analyzed, and what are potential areas for future study

  18. A Belief Network Decision Support Method Applied to Aerospace Surveillance and Battle Management Projects

    National Research Council Canada - National Science Library

    Staker, R

    2003-01-01

    This report demonstrates the application of a Bayesian Belief Network decision support method for Force Level Systems Engineering to a collection of projects related to Aerospace Surveillance and Battle Management...

  19. Survey of systems safety analysis methods and their application to nuclear waste management systems

    Energy Technology Data Exchange (ETDEWEB)

    Pelto, P.J.; Winegardner, W.K.; Gallucci, R.H.V.

    1981-11-01

    This report reviews system safety analysis methods and examines their application to nuclear waste management systems. The safety analysis methods examined include expert opinion, maximum credible accident approach, design basis accidents approach, hazard indices, preliminary hazards analysis, failure modes and effects analysis, fault trees, event trees, cause-consequence diagrams, G0 methodology, Markov modeling, and a general category of consequence analysis models. Previous and ongoing studies on the safety of waste management systems are discussed along with their limitations and potential improvements. The major safety methods and waste management safety related studies are surveyed. This survey provides information on what safety methods are available, what waste management safety areas have been analyzed, and what are potential areas for future study.

  20. Percolation pond as a method of managed aquifer recharge in a ...

    Indian Academy of Sciences (India)

    Raicy Mani Christy

    2017-07-17

    Jul 17, 2017 ... Percolation ponds have become very popular methods of managed aquifer recharge due to their low ... effect of recharge structures by some researchers .... qualitative comparison of observed responses of .... Two types of.

  1. Barriers to Use of Non-pharmacological Pain Management Methods in Neonatal Intensive Care Unit

    Directory of Open Access Journals (Sweden)

    Y Zahedpasha

    2017-09-01

    CONCLUSION: According to the results of this study, inadequate nursing staff and insufficient knowledge about pain complications were the most important causes for lack of application of pain management methods for neonates

  2. Computational Methods for Physical Model Information Management: Opening the Aperture

    International Nuclear Information System (INIS)

    Moser, F.; Kirgoeze, R.; Gagne, D.; Calle, D.; Murray, J.; Crowley, J.

    2015-01-01

    The volume, velocity and diversity of data available to analysts are growing exponentially, increasing the demands on analysts to stay abreast of developments in their areas of investigation. In parallel to the growth in data, technologies have been developed to efficiently process, store, and effectively extract information suitable for the development of a knowledge base capable of supporting inferential (decision logic) reasoning over semantic spaces. These technologies and methodologies, in effect, allow for automated discovery and mapping of information to specific steps in the Physical Model (Safeguard's standard reference of the Nuclear Fuel Cycle). This paper will describe and demonstrate an integrated service under development at the IAEA that utilizes machine learning techniques, computational natural language models, Bayesian methods and semantic/ontological reasoning capabilities to process large volumes of (streaming) information and associate relevant, discovered information to the appropriate process step in the Physical Model. The paper will detail how this capability will consume open source and controlled information sources and be integrated with other capabilities within the analysis environment, and provide the basis for a semantic knowledge base suitable for hosting future mission focused applications. (author)

  3. Development the method of integral evaluation the efficiency of management of financing the enterprise

    Directory of Open Access Journals (Sweden)

    Opeshko Nataliya Sergiivna

    2017-06-01

    Full Text Available The essence of the concept of «financing the enterprise» was determined. The system of indicators of measuring the effectiveness of management of financing the enterprise was developed. The internal structure of linkages in the scorecard was investigated. The method of integral evaluation of management of financing the enterprise was developed. The usefulness of using the developed method of integral evaluation was proved based on conducted experiments.

  4. Management Methods and Concepts for Building Competitive Advantage in Hospitality Companies

    Directory of Open Access Journals (Sweden)

    Gierczak Beata

    2014-09-01

    Full Text Available Introduction. Competitive advantage determines the success of modern enterprises, such as hospitality companies, on the market. In turn, competitive advantage is gained as the result of skillful management, taking into account the factors that characterize the company environment. In the management process, methods and concepts that, when properly applied, facilitate the company's innovative activities play the key role, thus contributing to building competitive advantage. The purpose of this paper is to specify and characterize the methods and management concepts most commonly used by hospitality companies in the process of building competitive advantage. The core benefit of these considerations is that they serve to identify those activities of hospitality companies in which the analyzed methods and concepts found practical application. The final part of the article is devoted to an attempt to identify barriers and problems that significantly limit the use of these methods and concepts. Material and methods. In order to achieve this objective, a survey and interviews were carried out in all three- and four-star hotels in the Rzeszów area in the first quarter of 2012. Results. The results revealed that the concept most commonly used by hoteliers was knowledge-based organization (knowledge management, followed by outsourcing, benchmarking and internal competition, respectively. Conclusions. The study also demonstrated that the managers of these hospitality companies significantly lacked substantive knowledge of emerging “market” management methods and concepts.

  5. Does training managers enhance the effects of implementing teamworking? A longitudinal, mixed methods field study

    DEFF Research Database (Denmark)

    Nielsen, Karina; Randall, R; Christensen, KB

    2010-01-01

    , transformational leadership and change management on the outcomes of team implementation. We used a combination of quantitative and qualitative research methods to isolate the impact of manager training on the success of the teamwork intervention. The results identified some significant, but modest, incremental......The introduction of team-working often has positive effects on team members but places significant new demands on managers. Unfortunately, little research has examined whether the impact of the intervention may be enhanced by providing managers with training during the change process. To test...

  6. Advantages and Disadvantages of Possible Methods of Managing the Production on the Assembly Lines in the Given Company

    OpenAIRE

    Václavková, Eva

    2014-01-01

    The bachelor thesis deals with methods of lean management, more exactly production planning and managing the production lines assembly. In this thesis, production planning system, kanban cards and heijunka will be described. The aim of this thesis is to describe methods of managing the production lines assembly and to suggest more effective management.

  7. Assessment and management of ageing of electrical instrumentation and control cables

    International Nuclear Information System (INIS)

    Pachner, J.; Burnay, S.G.

    2001-01-01

    This paper presents a summary of the results of an IAEA Co-ordinated Research Project (CRP) on Management of Ageing of In-containment Instrumentation and Control (I and C) Cables addressing current practices and techniques for assessing and managing ageing degradation of cables in real nuclear power plant (NPP) environments. These practices and techniques include environmental qualification, identification of cables of concern, condition monitoring, and predictive modelling. The paper shows how they should be integrated within a plant-specific ageing management programme utilising a systematic ageing management process, which is an adaptation of Deming Plan-Do-Check-Act cycle to ageing management. (author)

  8. Assessment and management of ageing of electrical instrumentation and control cables

    Energy Technology Data Exchange (ETDEWEB)

    Pachner, J. [International Atomic Energy Agency IAEA, Vienna (Austria); Burnay, S.G. [John Knott Associates Ltd., Newbury (United Kingdom)

    2001-07-01

    This paper presents a summary of the results of an IAEA Co-ordinated Research Project (CRP) on Management of Ageing of In-containment Instrumentation and Control (I and C) Cables addressing current practices and techniques for assessing and managing ageing degradation of cables in real nuclear power plant (NPP) environments. These practices and techniques include environmental qualification, identification of cables of concern, condition monitoring, and predictive modelling. The paper shows how they should be integrated within a plant-specific ageing management programme utilising a systematic ageing management process, which is an adaptation of Deming Plan-Do-Check-Act cycle to ageing management. (author)

  9. IMPROVING MANAGEMENT ACCOUNTING AND COST CALCULATION IN DAIRY INDUSTRY USING STANDARD COST METHOD

    Directory of Open Access Journals (Sweden)

    Bogdănoiu Cristiana-Luminiţa

    2013-04-01

    Full Text Available This paper aims to discuss issues related to the improvement of management accounting in the dairy industry by implementing standard cost method. The methods used today do not provide informational satisfaction to managers in order to conduct effectively production activities, which is why we attempted the standard cost method, it responding to the managers needs to obtain the efficiency of production, and all economic entities. The method allows an operative control of how they consume manpower and material resources by pursuing distinct, permanent and complete deviations during the activity and not at the end of the reporting period. Successful implementation of the standard method depends on the accuracy by which standards are developed and promotes consistently anticipated calculation of production costs as well as determination, tracking and controlling deviations from them, leads to increased practical value of accounting information and business improvement.

  10. On the effectiveness in implementing a waste-management-plan method in construction

    International Nuclear Information System (INIS)

    Tam, Vivian W.Y.

    2008-01-01

    The increasing awareness of waste management concerns from construction and demolition waste has led to the development of waste management as an important function of construction project management. The Hong Kong government started employing the implementation of a waste-management-plan (WMP) method for all construction projects in 2003. During the trial period, the government received different version of feedback from the industry. It also came out that detailed descriptions of waste management procedures in the WMP method largely affect the productivity of companies. This paper investigates the effectiveness of the existing implementation of the WMP method in the Hong Kong construction industry. A questionnaire survey and structured interviews were conducted. The result showed that 'Propose methods for on-site reuse of materials' and 'Propose methods for reducing waste' are the main benefits gained from the implementation of the WMP method. However, 'Low financial incentive' and 'Increase in overhead cost' are considered as the major difficulties in the implementation. From that, 'Use of prefabricated building components' is considered as the major effective measure to encourage the implementation of the WMP method

  11. A Method for Dynamic Risk Assessment and Management of Rockbursts in Drill and Blast Tunnels

    Science.gov (United States)

    Liu, Guo-Feng; Feng, Xia-Ting; Feng, Guang-Liang; Chen, Bing-Rui; Chen, Dong-Fang; Duan, Shu-Qian

    2016-08-01

    Focusing on the problems caused by rockburst hazards in deep tunnels, such as casualties, damage to construction equipment and facilities, construction schedule delays, and project cost increase, this research attempts to present a methodology for dynamic risk assessment and management of rockbursts in D&B tunnels. The basic idea of dynamic risk assessment and management of rockbursts is determined, and methods associated with each step in the rockburst risk assessment and management process are given, respectively. Among them, the main parts include a microseismic method for early warning the occurrence probability of rockburst risk, an estimation method that aims to assess potential consequences of rockburst risk, an evaluation method that utilizes a new quantitative index considering both occurrence probability and consequences for determining the level of rockburst risk, and the dynamic updating. Specifically, this research briefly describes the referenced microseismic method of warning rockburst, but focuses on the analysis of consequences and associated risk assessment and management of rockburst. Using the proposed method of risk assessment and management of rockburst, the occurrence probability, potential consequences, and the level of rockburst risk can be obtained in real-time during tunnel excavation, which contributes to the dynamic optimisation of risk mitigation measures and their application. The applicability of the proposed method has been verified by those cases from the Jinping II deep headrace and water drainage tunnels at depths of 1900-2525 m (with a length of 11.6 km in total for D&B tunnels).

  12. Caseload management methods for use within district nursing teams: a literature review.

    Science.gov (United States)

    Roberson, Carole

    2016-05-01

    Effective and efficient caseload management requires extensive skills to ensure that patients receive the right care by the right person at the right time. District nursing caseloads are continually increasing in size and complexity, which requires specialist district nursing knowledge and skills. This article reviews the literature related to caseload management with the aim of identifying the most effective method for district nursing teams. The findings from this review are that there are different styles and methods of caseload management. The literature review was unable to identify a single validated tool or method, but identified themes for implementing effective caseload management, specifically caseload analysis; workload measurement; work allocation; service and practice development and workforce planning. This review also identified some areas for further research.

  13. Multi-objective congestion management by modified augmented ε-constraint method

    International Nuclear Information System (INIS)

    Esmaili, Masoud; Shayanfar, Heidar Ali; Amjady, Nima

    2011-01-01

    Congestion management is a vital part of power system operations in recent deregulated electricity markets. However, after relieving congestion, power systems may be operated with a reduced voltage or transient stability margin because of hitting security limits or increasing the contribution of risky participants. Therefore, power system stability margins should be considered within the congestion management framework. The multi-objective congestion management provides not only more security but also more flexibility than single-objective methods. In this paper, a multi-objective congestion management framework is presented while simultaneously optimizing the competing objective functions of congestion management cost, voltage security, and dynamic security. The proposed multi-objective framework, called modified augmented ε-constraint method, is based on the augmented ε-constraint technique hybridized by the weighting method. The proposed framework generates candidate solutions for the multi-objective problem including only efficient Pareto surface enhancing the competitiveness and economic effectiveness of the power market. Besides, the relative importance of the objective functions is explicitly modeled in the proposed framework. Results of testing the proposed multi-objective congestion management method on the New-England test system are presented and compared with those of the previous single objective and multi-objective techniques in detail. These comparisons confirm the efficiency of the developed method. (author)

  14. Total quality management to improve gas plant profits

    International Nuclear Information System (INIS)

    Kovacs, K.; Wood, G.; Thompson, L.

    1992-01-01

    This paper describes the application of total quality management (TQM) techniques to the gas processing industry. It also assesses the profit potential for applying TQM in a typical plant situation. Companies utilizing TQM techniques will enjoy a competitive advantage. It represents a new way of doing business for the gas processing industry and incorporates many of Dr. W. Edwards Deming's methods which are often cited as one of the competitive advantages used by the Japanese. TQM can be described as a collection of systems or techniques that work toward two major objectives: To continuously improve the process or operation; and To view meeting the customer's needs as an important criterion for success. As applied to a typical U.S. gas processing operation, it involves several different techniques which are outlined in the paper. The benefits of TQM are detailed in this paper. All of these benefits go directly to a plant's bottom line profitability. The paper also describes ho to establish a program and identifies the factors necessary for successful implementation

  15. The method of complex evaluation of management in the sphere of housing and communal services

    Directory of Open Access Journals (Sweden)

    Okhotina Svetlana

    2017-01-01

    Full Text Available Many researchers considered the quality of management, but the definition of “quality control” in the literature is quite rare. The author’s definition of this concept, whose distinctive features are as follows: management is considered as a system, and its quality is determined by the quality of the elements of the system; management is of high quality, if not only provides function, but also the development of the facility; the quality of management is measured by customer satisfaction. The study authors of market relations in the sphere of housing and communal services helped to define the modern model of management of the industry of housing and communal services, which involves the preservation of state regulation and control and the bringing to market of private operators. Identified the need for further sustained efforts to implement the new economic relations in the system of housing and communal services at all levels of government, which requires further improvement of management. Based on the authors analysis of the methods of evaluation of activities of management companies found that despite their diversity they all have several disadvantages, the main of which is the lack of standard indicators by which to judge to what extent the housing managers of the organization implement the adopted programme. Therefore, the author proposes two sets of criteria (representing the result of control and management efficiency, which will be monitored and evaluated the quality management of the organization.

  16. Supply chain planning and management method:the fruit purchasing company case

    Directory of Open Access Journals (Sweden)

    Julio Kyosen Nakatani

    2018-06-01

    Full Text Available Abstract On the world stage, Brazil is the third largest world fruit producer. However, purchasing fruit companies are suffering from the effects of fluctuations in production and demand, inefficiency in production and information trade, lack of understanding of the dynamics of supply and reduction in profitability for all members of the fruit production chain. The supply chain management has been touted as one of the ways to reduce this volatility and improve outcomes for all involved with the supply chain. However, results of recent researches do not relate it directly to the fruit industry. To solve this problem, the present research aimed to analyze the planning and management of the supply chain of a fruit purchasing company and identify contributions and improvements to the theories and methods related to supply chain management to propose a method for planning and management the supply chain of fruit purchasing companies. It was conducted a case study from a mango fruit purchasing company using interviews with industry experts to assess the applicability, functionality and usefulness from the managerial point of view of the proposed method. Data analysis was done through the cross analysis of the methods of the supply chain management and the description of the case. The results of the study allowed the development of a method for planning and management the supply chain of fruit purchasing company. With the proposition of this method is expected to contribute with a sequence of steps to assist in planning and management of supply chain managers and specialists from a fruit purchasing company.

  17. Problem-solving and developing quality management methods and techniques on the example of automotive industry

    Directory of Open Access Journals (Sweden)

    Jacek Łuczak

    2015-12-01

    Full Text Available The knowledge about methods and techniques of quality management together with their effective use can be definitely regarded as an indication of high organisational culture. Using such methods and techniques in an effective way can be attributed to certain level of maturity, as far as the quality management system in an organisation is concerned. There is in the paper an analysis of problem-solving methods and techniques of quality management in the automotive sector in Poland. The survey was given to the general population, which in case of the study consisted of companies operating in Poland that had certified quality management systems against ISO/TS 16949. The results of the conducted survey and the conclusions of the author can show actual and potential OEM suppliers (both 1st and 2nd tier in which direction their strategies for development and improvement of quality management systems should go in order to be effective. When the universal character of methods and techniques used in the surveyed population of companies is taken into consideration, it can be assumed that the results of the survey are also universal for all organisations realising the TQM strategy. The results of the research confirmed that methods which are also the basis for creating key system documents are the most relevant ones, i.e. flowcharts and FMEA, and moreover process monitoring tools (SPC and problem solving methods -above all 8D.

  18. MULTIAGENT TECHNOLOGIES’ METHOD IN MANAGING BUSINESS-PROCESSES OF THE TECHNICAL PREPARING FOR PRODUCTION

    Directory of Open Access Journals (Sweden)

    P.N. Pavlenko

    2005-02-01

    Full Text Available  The method of managing the process of the extended productions technological preparation is given. The method is used for integrating the automated systems of industrial assignment of  CAD/CAM/SAPP and ERP systems.

  19. Explaining the Effectiveness of the Contrast Culture Method for Managing Interpersonal Interactions across Cultures

    Science.gov (United States)

    Hiratsuka, Hiroyoshi; Suzuki, Hanako; Pusina, Alexis

    2016-01-01

    One of the current challenges in the field of intercultural education comes from the limited availability of training efficacy studies. The present study focused on explaining the effectiveness of the Contrast Culture Method (CCM) as an intercultural education method for managing interpersonal interactions across cultures between graduate…

  20. Accurate and Robust Numerical Methods for the Dynamic Portfolio Management Problem

    NARCIS (Netherlands)

    F. Cong (Fei); C.W. Oosterlee (Cornelis)

    2017-01-01

    textabstractThis paper enhances a well-known dynamic portfolio management algorithm, the BGSS algorithm, proposed by Brandt et al. (Review of Financial Studies, 18(3):831–873, 2005). We equip this algorithm with the components from a recently developed method, the Stochastic Grid Bundling Method

  1. Accurate and Robust Numerical Methods for the Dynamic Portfolio Management Problem

    NARCIS (Netherlands)

    Cong, F.; Oosterlee, C.W.

    2016-01-01

    This paper enhances a well-known dynamic portfolio management algorithm, the BGSS algorithm, proposed by Brandt et al. (Review of Financial Studies, 18(3):831–873, 2005). We equip this algorithm with the components from a recently developed method, the Stochastic Grid Bundling Method (SGBM), for

  2. Accurate and Robust Numerical Methods for the Dynamic Portfolio Management Problem

    NARCIS (Netherlands)

    Cong, F.; Oosterlee, C.W.

    2016-01-01

    This paper enhances a well-known dynamic portfolio management algorithm, the BGSS algorithm, proposed by Brandt et al. (Review of Financial Studies, 18(3):831–873, 2005). We equip this algorithm with the components from a recently developed method, the Stochastic Grid Bundling Method (SGBM), for

  3. Comparing Management Models of Secondary Schools in Tamaulipas, Mexico: An Exploration with a Delphi Method

    Science.gov (United States)

    Navarro-Leal, Marco Aurelio; Garcia, Concepcion Nino; Saldivar, Luisa Caballero

    2012-01-01

    For a preliminary exploration of management models between two secondary schools, a Delphi method was used in order to identify and focus relevant topics for a larger research. A first approximation with this method proved to be a heuristic tool to focus and define some categories and guidelines of enquiry. It was found that in both of the schools…

  4. Insight into dementia care management using social-behavioral theory and mixed methods.

    Science.gov (United States)

    Connor, Karen; McNeese-Smith, Donna; van Servellen, Gwen; Chang, Betty; Lee, Martin; Cheng, Eric; Hajar, Abdulrahman; Vickrey, Barbara G

    2009-01-01

    For health organizations (private and public) to advance their care-management programs, to use resources effectively and efficiently, and to improve patient outcomes, it is germane to isolate and quantify care-management activities and to identify overarching domains. The aims of this study were to identify and report on an application of mixed methods of qualitative statistical techniques, based on a theoretical framework, and to construct variables for factor analysis and exploratory factor analytic steps for identifying domains of dementia care management. Care-management activity data were extracted from the care plans of 181 pairs of individuals (with dementia and their informal caregivers) who had participated in the intervention arm of a randomized controlled trial of a dementia care-management program. Activities were organized into types, using card-sorting methods, influenced by published theoretical constructs on self-efficacy and general strain theory. These activity types were mapped in the initial data set to construct variables for exploratory factor analysis. Principal components extraction with varimax and promax rotations was used to estimate the number of factors. Cronbach's alpha was calculated for the items in each factor to assess internal consistency reliability. The two-phase card-sorting technique yielded 45 activity types out of 450 unique activities. Exploratory factor analysis produced four care-management domains (factors): behavior management, clinical strategies and caregiver support, community agency, and safety. Internal consistency reliability (Cronbach's alpha) of items for each factor ranged from.63 for the factor "safety" to.89 for the factor "behavior management" (Factor 1). Applying a systematic method to a large set of care-management activities can identify a parsimonious number of higher order categories of variables and factors to guide the understanding of dementia care-management processes. Further application of this

  5. Traffic Management by Using Admission Control Methods in Multiple Node IMS Network

    Directory of Open Access Journals (Sweden)

    Filip Chamraz

    2016-01-01

    Full Text Available The paper deals with Admission Control methods (AC as a possible solution for traffic management in IMS networks (IP Multimedia Subsystem - from the point of view of an efficient redistribution of the available network resources and keeping the parameters of Quality of Service (QoS. The paper specifically aims at the selection of the most appropriate method for the specific type of traffic and traffic management concept using AC methods on multiple nodes. The potential benefit and disadvantage of the used solution is evaluated.

  6. Theory building trends in international management research: an archival review of preferred methods

    Directory of Open Access Journals (Sweden)

    Drikus Kriek

    2011-08-01

    Full Text Available A number of distinguished scholars believe that for theory development to occur within a field, qualitative research must precede quantitative research in order for the field to progress toward maturity. The purpose of this study was to investigate the international management literature from 1991-2007 to ascertain current levels of use of qualitative, quantitative, conceptual and joint (quantitative and qualitative research methods in the field.  Results indicate scholars employ quantitative methods more than qualitative methods.  The implications of these findings for future theory development and the generation of context relevant international management knowledge are discussed.

  7. Use of qualitative methods in published health services and management research: a 10-year review.

    Science.gov (United States)

    Weiner, Bryan J; Amick, Halle R; Lund, Jennifer L; Lee, Shoou-Yih Daniel; Hoff, Timothy J

    2011-02-01

    Over the past 10 years, the field of health services and management research has seen renewed interest in the use of qualitative research methods. This article examines the volume and characteristics of qualitative research articles published in nine major health services and management journals between 1998 and 2008. Qualitative research articles comprise 9% of research articles published in these journals. Although the publication rate of qualitative research articles has not kept pace with that of quantitative research articles, citation analysis suggests that qualitative research articles contribute comparably to the field's knowledge base. A wide range of policy and management topics has been examined using qualitative methods. Case study designs, interviews, and documentary sources were the most frequently used methods. Half of qualitative research articles provided little or no detail about key aspects the study's methods. Implications are discussed and recommendations are offered for promoting the publication of qualitative research.

  8. Methods for Engineering Enterprise Management Based on the Inter-factor Productive-Economic Relations

    Directory of Open Access Journals (Sweden)

    O. A. Naydis

    2015-01-01

    Full Text Available The article analyzes the current state of engineering enterprises in the Russian Federation. It conducts a review and analysis of existing methods for business management using indicators to characterize enterprise activities by means of the scalars, functional dependencies of one factor value on the other (function one, wherein the magnitude of one factor value corresponds to a single magnitude of the other value - a dependent factor, as well as by means of data tables, and, as an example, by balance list and articulation statement used in accounting. The paper gives statements of need for taking into account the mutual influences and system interrelation of factors diversity and for special methods of their identification. The article is aimed at development of methods for business management of engineering enterprises taking into account a variety of factors and their interdependencies. The relevance of the issue stems from the fact that the analysis of existing methods of business management has shown that it is impossible to have the requested information about a considerable number of productive-economic factors in their system-based interrelation. There is a proposal for the management objects wherein multiple factors and their interactions are taken into consideration to be called inter-factor productive-economic relations (IPER. The paper presents the IPER-based structure of the business management system. It describes a method to identify controlled productive-economic factors and provides allocation and justification of the significant ones for the IPER control. Described methods of business management are distinguished by a large amount of control information, and data form rather complex structures. Therefore, it is proposed to use them in automatic control systems. The paper describes principles of information support for business management through binding IPER to organizational structures of the enterprise. It offers an

  9. The Role of Managers in Employee Wellness Programs: A Mixed-Methods Study.

    Science.gov (United States)

    Passey, Deborah G; Hammerback, Kristen; Huff, Aaron; Harris, Jeffrey R; Hannon, Peggy A

    2018-01-01

    The purpose of this study is to evaluate managers' barriers and facilitators to supporting employee participation in the Washington State Wellness program. Exploratory sequential mixed methods. Four Washington State agencies located in Olympia and Tumwater, Washington. State employees in management positions (executive, middle, and line), whose job includes supervision of subordinates and responsibility for the performance and conduct of a subunit or group. We interviewed 23 managers and then used the results to create a survey that was fielded to all managers at the 4 agencies. The survey response rate was 65% (n = 607/935). We used qualitative coding techniques to analyze interview transcripts and descriptive statistics to summarize survey data. We used the Total Worker Health framework to organize our findings and conclusions. Managers support the wellness program, but they also face challenges with accommodating employees' participation due to workload, scheduling inflexibility, and self-efficacy to discuss wellness with direct reports. About half the managers receive support from the manager above them, and most have not received training on the wellness program. Our findings point to several strategies that can strengthen managers' role in supporting the wellness program: the provision of training, targeted messages, formal expectations, and encouragement (from the manager above) to support employees' participation.

  10. Application of analytic hierarchy process method in the evaluation of managers of industrial enterprises in Slovakia

    Directory of Open Access Journals (Sweden)

    Lukáš Jurík

    2015-10-01

    Full Text Available Evaluation of employees in industrial enterprises is a problem, because evaluators often make decisions based on subjective feelings. The objective approach is missing in the evaluation of employees. Objective approach during evaluation of employees can be achieved by applying the method of Analytic Hierarchy Process. We applied the method in the field of HR management in three enterprises in Slovakia. For the first time, we used the method in an enterprise in selection process of the position of HR worker, where on the basis of the criteria, we recommended the most suitable candidate for the enterprise. The second was the application of the method in the enterprise for evaluating managers, where the enterprise needed to identify qualitative differences between managers and then determine, in which fields the employees must improve. The third application was the creation of a methodology for evaluating the competencies of managers in enterprise. In the above-mentioned enterprise, there was defined a competency model, which served as a system of criteria for evaluation, and by the application of method, quality of managers was able to be expressed by the synthetic indicator.

  11. Using the Communication Methods, Tools and Support During Management of Project Communication in Industrial Manufacturing Enterprises

    Science.gov (United States)

    Samáková, Jana; Babčanová, Dagmar; Hrablikchovanová, Henrieta; Mesárošová, Jana; Šujanová, Jana

    2017-09-01

    Effective communication is the most significant ability for project manager and successful project. However, during the management of projects communication, it is very often forgotten, often overlooked or taken for granted. In the management of projects, it is principally necessary to deal with communication during all project lifecycle. Within the project communication, it is very important to define the main methods, tools, support of communication and frequency of communication; these belong to the most important elements of the communication channel which is very often forgotten. Therefore, the main aim of the paper is to analyse the utilisation of the communication channel: communication methods, communication tools, communication frequency and to support project communication in industrial manufacturing enterprises in Slovakia. Based on the research, we can conclude that communication channel is not adequately elaborated in international methodologies and standards of project management as well as in industrial manufacturing enterprises. These facts are very negative, conclusion and it is therefore necessary to deal with the problem.

  12. The method innovation in nuclear equipment quality witness tracing and management

    International Nuclear Information System (INIS)

    Hao Guang

    2012-01-01

    The total construction cost of a nuclear power plant, equipment procurement cost accounts for about 47%-53%. Whether the quality of equipment can meet the technical requirements plays a significant role in the operation and maintenance of a nuclear power plant. Only if we adopt effective management can the equipment quality be ensured. As the most important method of quality control, the effective attendance and track of quality witness points has a crucial effect on contract smooth implementation as well. The essay mainly illustrates the method of quality witness point tracing and management and how to incorporate serious minded ideas and all take part in ways into quality management, hoping to offer some enlightenment on the innovation of nuclear power equipment quality management. (author)

  13. Risk-oriented internal control: The essence, management methods at small enterprises

    OpenAIRE

    Piskunov, V. A.; Manyayeva, V. A.; Tatarovskaya, T. E.; Bychkova, E. Y.

    2016-01-01

    The research topic relevance is inspired by necessity to develop theoretical and methodical provisions on the internal control system, risk-based management at small enterprises and to prove application feasibility, using economic-mathematical methods its implementation. The purpose of this research is to develop theoretical and methodical approaches to internal control system formation in small businesses, generating reliable and relevant information on the commercial organization activities...

  14. Iterative Methods for Solving Nonlinear Parabolic Problem in Pension Saving Management

    Science.gov (United States)

    Koleva, M. N.

    2011-11-01

    In this work we consider a nonlinear parabolic equation, obtained from Riccati like transformation of the Hamilton-Jacobi-Bellman equation, arising in pension saving management. We discuss two numerical iterative methods for solving the model problem—fully implicit Picard method and mixed Picard-Newton method, which preserves the parabolic characteristics of the differential problem. Numerical experiments for comparison the accuracy and effectiveness of the algorithms are discussed. Finally, observations are given.

  15. METHODS OF MANAGING TRAFFIC DISTRIBUTION IN INFORMATION AND COMMUNICATION NETWORKS OF CRITICAL INFRASTRUCTURE SYSTEMS

    OpenAIRE

    Kosenko, Viktor; Persiyanova, Elena; Belotskyy, Oleksiy; Malyeyeva, Olga

    2017-01-01

    The subject matter of the article is information and communication networks (ICN) of critical infrastructure systems (CIS). The goal of the work is to create methods for managing the data flows and resources of the ICN of CIS to improve the efficiency of information processing. The following tasks were solved in the article: the data flow model of multi-level ICN structure was developed, the method of adaptive distribution of data flows was developed, the method of network resource assignment...

  16. Implementation of a standardized out-of-hospital management method for Parkinson dysphagia.

    Science.gov (United States)

    Wei, Hongying; Sun, Dongxiu; Liu, Meiping

    2017-12-01

    Our objective is to explore the effectiveness and feasibility of establishing a swallowing management clinic to implement out-of-hospital management for Parkinson disease (PD) patients with dysphagia. Two-hundred seventeen (217) voluntary PD patients with dysphagia in a PD outpatient clinic were divided into a control group with 100 people, and an experimental group with 117 people. The control group was given dysphagia rehabilitation guidance. The experimental group was presented with the standardized out-of-hospital management method as overall management and information and education materials. Rehabilitation efficiency and incidence rate of dysphagia, as well as relevant complications of both groups were compared after a 6-month intervention. Rehabilitation efficiency and the incidence rate of dysphagia including relevant complications of patients treated with the standardized out-of-hospital management were compared with those seen in the control group. The differences have distinct statistics meaning (pdysphagia complications and improve the quality of life in patients with PD.

  17. Maximizing beneficence and autonomy. Ethical support for the use of nonpharmacological methods for managing dental anxiety.

    Science.gov (United States)

    Donate-Bartfield, Evelyn; Spellecy, Ryan; Shane, Nicholas J

    2010-01-01

    This article examines advantages associated with nonpharmacological behavioral management techniques and suggests that there are benefits to their use (such as achieving a more lasting solution to the problem of dental anxiety) that are not realized with medication-based interventions. Analyses that use Kantian and existential viewpoints for exploring the use of medication versus behavioral interventions for managing life problems yield parallel conclusions: there are advantages gained by using behavioral interventions that are not always associated with medication-based interventions. These analyses, taken together with an understanding of the psychology of dental anxiety management, suggest that using nonpharmacological techniques for the management of dental anxiety can maximize adherence to the ethical principles of beneficence and patient autonomy. The authors discuss the barriers that make nonpharmacological interventions for anxiety management difficult for dentists to routinely use, and suggest that additional training in these methods and increased collaboration with mental health professionals are needed for dentists.

  18. Self-management-support in dementia care: A mixed methods study among nursing staff.

    Science.gov (United States)

    Verkaik, Renate; van Antwerpen-Hoogenraad, Paulien; de Veer, Anke; Francke, Anneke; Huis In Het Veld, Judith

    2017-11-01

    Background Self-management in patients and family caregivers confronted with dementia is not self-evident. Self-management skills may be limited because of the progressive cognitive decline of the patient and because family caregivers are often also very aged. Self-management support by nursing staff is therefore of paramount importance. Objectives To gain insight into how nursing staff perceive their self-management support tasks, and how they put them into practice. Research questions are: 'What are the opinions and experiences of Dutch nursing staff working in home care or residential elderly care regarding self-management support for people with dementia and their family caregivers?' and 'Do nursing staff feel sufficiently trained and skilled for self-management support?'. Methods A mixed methods approach was used, combining cross-sectional quantitative survey data from 206 Dutch nursing professionals with qualitative interviews among 12 nursing staff working in home care or residential elderly care in The Netherlands. Results Nursing staff working in home care experienced self-management support of people with dementia as a part of their job and as an attractive task. They consider 'helping people with dementia to maintain control over their lives by involving them in decisions in daily care' the essence of self-management support. Nursing staff saw family caregivers as their main partners in providing self-management support to the patient. They were less aware that family caregivers themselves might also need self-management support. Nursing staff often felt insufficiently trained to give adequate self-management support. RN's and CNA's did not differ in their opinions, experiences and training needs. Conclusions Nursing staff in home care do consider self-management support an important and attractive task in dementia care. Their skills for providing self-management support to patients with dementia and family caregivers need improvement. Recommendations

  19. Project Management Methods in Projects Co-financed by EU Funds

    OpenAIRE

    Kostalova, Jana; Tetrevova, Libena; Patak, Michal

    2017-01-01

    This paper deals with the management of projects co-financed by European Union funds (structural funds and the Cohesion Fund) in the Czech Republic (EU projects). The authors aimed to analyze and assess the scope of familiarity with basic project management methods and their application within the implementation of EU projects in the Czech Republic in the Programming Period 2007–2013. Based on a questionnaire survey of EU project organisers, the authors evaluate their attitudes to project man...

  20. METHODICAL APPROACHES TO FORMING INNOVATIVE PROJECT AND ENTERPRISE MANAGEMENT ORGANIZATIONAL STRUCTURES

    Directory of Open Access Journals (Sweden)

    A. O. Baklanov

    2011-01-01

    Full Text Available The following principles are discussed as methodical bases of the choice of innovative project and enterprise management organizational structures: hierarchism, bureaucratization, adhocratie, tent organization, lean business engineering, rational organization, amorphous organization, teaching organization. Conditions that complicate industrial and technological processes influence enterprise management process dynamics. The variety of existing types of organizational structures is determined by industrial, economic, psychological and social conditions.

  1. Implementation of a standardized out-of-hospital management method for Parkinson dysphagia

    OpenAIRE

    Wei, Hongying; Sun, Dongxiu; Liu, Meiping

    2017-01-01

    Summary Objective: Our objective is to explore the effectiveness and feasibility of establishing a swallowing management clinic to implement out-of-hospital management for Parkinson disease (PD) patients with dysphagia. Method: Two-hundred seventeen (217) voluntary PD patients with dysphagia in a PD outpatient clinic were divided into a control group with 100 people, and an experimental group with 117 people. The control group was given dysphagia rehabilitation guidance. The experimental gr...

  2. Continuous Improvement in Nursing Education through Total Quality Management (TQM

    Directory of Open Access Journals (Sweden)

    Tang Wai Mun

    2013-11-01

    Full Text Available Total Quality Management (TQM has generally been validated as a crucial revolution in the management field. Many academicians believe that the concept of TQM is applicable to academics and provides guiding principles towards improving education. Therefore, an increasing number of educational institutions such as schools, colleges and universities have started to embrace TQM philosophies to their curricula.Within the context of TQM, this paper would explore the concept of continuous improvement by using the Deming philosophy. Subsequently, this paper would elaborate on the application of TQM to bring about continuous improvement in the current education system.

  3. Tüketicilerin Coğrafi İşaretli Ürün Algısı ve Daha Fazla Fiyat Ödeme İsteği: Yapısal Eşitlik Modellemesi Yaklaşımı(Consumers' Perception of Product with Geographical Indication and Willingness to Pay More: A Structural Equation Modeling Approach

    Directory of Open Access Journals (Sweden)

    İsmail Tamer TOKLU

    2016-04-01

    Full Text Available Bir fikri ve sınai mülkiyet hakkı olarak coğrafi işaret, belirli bir nitelik, ün veya diğer özellikleriyle kökeninin bulunduğu bir yöre, alan, bölge veya ülke ile özdeşleşmiş bir ürünü gösteren işaretlerdir. Bu çalışmanın amacı tüketicilerin coğrafi işaretli ürünlere olan algılarını ve bu ürünlere daha fazla ödeme eğilimlerini ölçmektir. Bu amaç için oluşturulan modelin verileri kolayda örnekleme yöntemiyle, tüketicilerle yüz yüze yapılan anket çalışmasından elde edilmiştir. Elde edilen veriler En Küçük Kısmi Kareler (PLS yöntemi ile analiz edilmiştir. Araştırmadan elde edilen bulgulara göre; kültür ve gelenek, kalite ve güvenilirlik coğrafi işaretli ürün algısını etkilerken, coğrafi işaretli ürün algısı da daha fazla fiyat ödeme eğilimini etkilemektedir. Diğer taraftan, ekonomik desteğin coğrafi işaretli ürün algısını etkilemediği bulunmuştur. Bu çalışmanın sonuçları rekabet avantajı elde etmek isteyen yerel üreticiler için etkili bir pazarlama stratejisine karar vermeleri açısından değerli ve önemli bilgiler sunmaktadır. As an intellectual property right, geographical indications are signs showing an exclusive quality, celebrity or other attributes specified with a territory, area, region or country of its origin. This study aims to evaluate consumers' perceptions toward products with geographical indication and their willingness to pay a premium price for these types of products. The data of the model proposed for this aim were collected by convenience sampling method with face to face questionnaire. PLS (Partial Least Squares Method was used to analyze the data. The main findings of the study are as follows, 'culture and tradition' and 'quality and safety' affect the consumers' perceptions towards geographical indication. This perception also affects the willingness to pay more for products with geographical indication. On the other

  4. Tools and Methods for Risk Management in Multi-Site Engineering Projects

    Science.gov (United States)

    Zhou, Mingwei; Nemes, Laszlo; Reidsema, Carl; Ahmed, Ammar; Kayis, Berman

    In today's highly global business environment, engineering and manufacturing projects often involve two or more geographically dispersed units or departments, research centers or companies. This paper attempts to identify the requirements for risk management in a multi-site engineering project environment, and presents a review of the state-of-the-art tools and methods that can be used to manage risks in multi-site engineering projects. This leads to the development of a risk management roadmap, which will underpin the design and implementation of an intelligent risk mapping system.

  5. Sales Education beyond the Classroom: Building Participative Learning Experiences in Sales Management through the CMGS Method (Case Method with Guest Speakers)

    Science.gov (United States)

    Ruizalba Robledo, José Luis; Almenta López, Estefanía; Vallespín Arán, María

    2014-01-01

    The overarching goal of working through the CMGS Method (Case Method with Guest Speakers) in Sales Management courses is to provide Business and marketing learners with practical knowledge about how a sales manager can deal with a wide variety of possible professional scenarios. Even when the case method itself is an excellent way to equip…

  6. Local Stakeholder Perception on Community Participation in Marine Protected Area Management: A Q-Method Approach

    Science.gov (United States)

    Megat Jamual Fawaeed, P. S.; Daim, M. S.

    2018-02-01

    Local stakeholder involvement in Marine Protected Area (MPA) management can bring to a successful MPA. Generally, participatory research in marine protected area management is exploring the relationship between marine protected area management approach adopted by the management agencies and the level of participation of local stakeholder whom reside within the marine protected areas. However, the scenario of local community participation in MPA management in Malaysia seems discouraging and does not align with the International Aichi Biodiversity Target 2020. In order to achieve the International Aichi Biodiversity Target 2020, this paper attempts to explore the methodology on participatory research towards the local stakeholder of Pulau Perhentian Marine Park (PPMP), Terengganu, Malaysia. A Q-methodology is used to investigate the perspective of local stakeholder who represents different stances on the issues, by having participants rank and sort a series of statements by comply quantitative and qualitative method in collecting the data. A structured questionnaire will be employed across this study by means of face-to-face interview. In total, 210 respondents from Kampung Pasir Hantu are randomly selected. Meanwhile, a workshop with the agency (Department of Marine Park) had been held to discuss about the issues faces on behalf of management that manage the PPMP. Using the Q-method, researcher acknowledged wise viewpoints, reflecting how different stakeholders’ perception and opinion about community participation with highlights the current level of community participation in MPA. Thus, this paper describes the phases involved in this study, methodology and analysis used in making a conclusion .

  7. Management Methods of Energy Efficiency and reduction of Greenhouse Gas Emissions

    International Nuclear Information System (INIS)

    Actina, G.; Grackova, L.; Zebergs, V.; Zeltins, N.

    2007-01-01

    The management methods of energy efficiency and reduction of GHG emissions and their introduction depend on the financing possibilities and the management structures. Analysis is made of the following methods for the management of the process of raising energy efficiency: an energy audit and certification; the third-party financing; networks for energy efficiency and services of raising energy efficiency. In Latvia more than a half of all the energy resources are consumed for heating and the supply of hot water. The thermal parameters of buildings are poor therefore wide introduction of buildings certification, based on energy audit is of particular importance. The third-party financing would allow resolving the justified problems of audit and certification in order to hasten the heating process of buildings, particularly, owing to the appearance of respective foreign third-party financing companies, although the privatisation of dwelling houses and reorganisation of their management is not yet completed. The networks for energy efficiency have not found supporters in Latvia, however, great importance is attached to the thermal parameters of industrial premises, which are as poor as in the other buildings of the country, and here is a considerable potential of energy economy. Concerning the services of raising energy efficiency, the management method of this process is supposed to reach maximum energy economy after thermo and technical renovation of buildings at their various stages. It is connected with general organisational and financial adjustment of the management of buildings, as well as with the development of the energy service company.(author)

  8. Training method for enhancement of safety attitude in nuclear power plant based on crew resource management

    International Nuclear Information System (INIS)

    Ishibashi, Akira; Karikawa, Daisuke; Takahashi, Makoto; Wakabayashi, Toshio; Kitamura, Masaharu

    2010-01-01

    A conventional training program for nuclear power plant operators has been developed with emphasis on improvement of knowledge and skills of individual operators. Although it has certainly contributed to safety operation of nuclear power plants, some recent incidents have indicated the necessity of an improved training program aiming at improvement of the performance of operators working as a team. In the aviation area, crew resource management (CRM) training has shown the effect of resolving team management issues of flight crews, aircraft maintenance crews, and so on. In the present research, we attempted to introduce the CRM concept into operator training in nuclear power plants as training for conceptual skill enhancement. In this paper, a training method specially customized for nuclear power plant operators based on CRM is proposed. The proposed method has been practically utilized in the management training course of Japan Nuclear Technology Institute. The validity of the proposed method has been evaluated by means of a questionnaire survey. (author)

  9. Environmental and economic assessment methods for waste management decision-support: possibilities and limitations.

    Science.gov (United States)

    Finnveden, Göran; Björklund, Anna; Moberg, Asa; Ekvall, Tomas

    2007-06-01

    A large number of methods and approaches that can be used for supporting waste management decisions at different levels in society have been developed. In this paper an overview of methods is provided and preliminary guidelines for the choice of methods are presented. The methods introduced include: Environmental Impact Assessment, Strategic Environmental Assessment, Life Cycle Assessment, Cost-Benefit Analysis, Cost-effectiveness Analysis, Life-cycle Costing, Risk Assessment, Material Flow Accounting, Substance Flow Analysis, Energy Analysis, Exergy Analysis, Entropy Analysis, Environmental Management Systems, and Environmental Auditing. The characteristics used are the types of impacts included, the objects under study and whether the method is procedural or analytical. The different methods can be described as systems analysis methods. Waste management systems thinking is receiving increasing attention. This is, for example, evidenced by the suggested thematic strategy on waste by the European Commission where life-cycle analysis and life-cycle thinking get prominent positions. Indeed, life-cycle analyses have been shown to provide policy-relevant and consistent results. However, it is also clear that the studies will always be open to criticism since they are simplifications of reality and include uncertainties. This is something all systems analysis methods have in common. Assumptions can be challenged and it may be difficult to generalize from case studies to policies. This suggests that if decisions are going to be made, they are likely to be made on a less than perfect basis.

  10. Method agreement between measuring of boar sperm concentration using Makler chamber and photometer

    OpenAIRE

    Mrkun Janko; Kosec M.; Zakošek Maja; Zrimšek Petra

    2007-01-01

    Determination of boar sperm concentration using a photometer is used routinely by many artificial insemination (AI) laboratories. The agreement between determining sperm concentration using Makler chamber and a photometer has been assessed. Method agreement was evaluated on the basis of scatter plots with Deming regression line, absolute bias plots with limits of agreement, and relative bias plots. Coefficients of variance for the Makler chamber and a photometer were calculated as 6.575+3.461...

  11. ADVANTAGES AND DISADVANTAGES OF APPLYING EVOLVED METHODS IN MANAGEMENT ACCOUNTING PRACTICE

    Directory of Open Access Journals (Sweden)

    SABOU FELICIA

    2014-05-01

    Full Text Available The evolved methods of management accounting have been developed with the purpose of removing the disadvantages of the classical methods, they are methods adapted to the new market conditions, which provide much more useful cost-related information so that the management of the company is able to take certain strategic decisions. Out of the category of evolved methods, the most used is the one of standard-costs due to the advantages that it presents, being used widely in calculating the production costs in some developed countries. The main advantages of the standard-cost method are: in-advance knowledge of the production costs and the measures that ensure compliance to these; with the help of the deviations calculated from the standard costs, one manages a systematic control over the costs, thus allowing the making of decision in due time, in as far as the elimination of the deviations and the improvement of the activity are concerned and it is a method of analysis, control and cost forecast; Although the advantages of using standards are significant, there are a few disadvantages to the employment of the standard-cost method: sometimes there can appear difficulties in establishing the deviations from the standard costs, the method does not allow an accurate calculation of the fixed costs. As a result of the study, we can observe the fact that the evolved methods of management accounting, as compared to the classical ones, present a series of advantages linked to a better analysis, control, and foreseeing of costs, whereas the main disadvantage is related to the large amount of work necessary for these methods to be applied.

  12. ADVANTAGES AND DISADVANTAGES OF APPLYING EVOLVED METHODS IN MANAGEMENT ACCOUNTING PRACTICE

    Directory of Open Access Journals (Sweden)

    SABOU FELICIA

    2014-05-01

    Full Text Available The evolved methods of management accounting have been developed with the purpose of removing the disadvantages of the classical methods, they are methods adapted to the new market conditions, which provide much more useful cost-related information so that the management of the company is able to take certain strategic decisions. Out of the category of evolved methods, the most used is the one of standard-costs due to the advantages that it presents, being used widely in calculating the production costs in some developed countries. The main advantages of the standard-cost method are: in-advance knowledge of the production costs and the measures that ensure compliance to these; with the help of the deviations calculated from the standard costs, one manages a systematic control over the costs, thus allowing the making of decision in due time, in as far as the elimination of the deviations and the improvement of the activity are concerned and it is a method of analysis, control and cost forecast; Although the advantages of using standards are significant, there are a few disadvantages to the employment of the standard-cost method: sometimes there can appear difficulties in establishing the deviations from the standard costs, the method does not allow an accurate calculation of the fixed costs. As a result of the study, we can observe the fact that the evolved methods of management accounting, as compared to the classical ones, present a series of advantages linked to a better analysis, control, and foreseeing of costs, whereas the main disadvantage is related to the large amount of work necessary for these methods to be applied

  13. Optimization of waste management in the EG with the aid of systems analysis methods

    International Nuclear Information System (INIS)

    Braun, H.W.M.; Ditterich, K.; Schneider, J.

    1974-01-01

    The problems of waste management range from their production when they must be collected to transport, conditioning etc., and, finally, to safe disposal. Until recently, the subsystems in waste management had for the most part been treated empirically and separately. In this paper, all subsystems are considered and related to each other with systems analysis methods. In this way the complex problem including the initial and end values can be optimized with regard to a maximum of security and reliability and a minimum of cost and environmental load. The annex contains a simplified example for the treatment of waste mangement by methods of systems analysis. (orig./AK) [de

  14. Methods and Algorythms of Alternatives Ranging in Managing the Telecommunication Services Guality.

    Directory of Open Access Journals (Sweden)

    Pham Quang Hiep

    2015-07-01

    Full Text Available The article deals with methods of solving the problem of ranging of alternatives in information-analytical system of managing the quality of telecommunication services rendering process. Tasks of choice are determined, in which the alternatives are as follows: states of quality of different objects in the structure of telecommunication company management. An algorithm of ranging of objects is elaborated for the case of using unstructured set of indices. The algorithm enables to determine the objects priorities and to select the best ones among them. The suggested methods may be used while elaborating the programs of improvement of telecommunication companies competitiveness.

  15. On the Relationship between EFL Teachers' Classroom Management Approaches and the Dominant Teaching Style: A Mixed Method Study

    Science.gov (United States)

    Kazemi, Ali; Soleimani, Neda

    2016-01-01

    As a factor contributing to a successful teaching career, classroom management can be affected by many latent and explicit variables. In this mixed method study, the researchers sought to scrutinize the possible connections among EFL teachers' classroom management approaches at two dimensions of behavior management and instructional management and…

  16. Who's in and why? A typology of stakeholder analysis methods for natural resource management.

    Science.gov (United States)

    Reed, Mark S; Graves, Anil; Dandy, Norman; Posthumus, Helena; Hubacek, Klaus; Morris, Joe; Prell, Christina; Quinn, Claire H; Stringer, Lindsay C

    2009-04-01

    Stakeholder analysis means many things to different people. Various methods and approaches have been developed in different fields for different purposes, leading to confusion over the concept and practice of stakeholder analysis. This paper asks how and why stakeholder analysis should be conducted for participatory natural resource management research. This is achieved by reviewing the development of stakeholder analysis in business management, development and natural resource management. The normative and instrumental theoretical basis for stakeholder analysis is discussed, and a stakeholder analysis typology is proposed. This consists of methods for: i) identifying stakeholders; ii) differentiating between and categorising stakeholders; and iii) investigating relationships between stakeholders. The range of methods that can be used to carry out each type of analysis is reviewed. These methods and approaches are then illustrated through a series of case studies funded through the Rural Economy and Land Use (RELU) programme. These case studies show the wide range of participatory and non-participatory methods that can be used, and discuss some of the challenges and limitations of existing methods for stakeholder analysis. The case studies also propose new tools and combinations of methods that can more effectively identify and categorise stakeholders and help understand their inter-relationships.

  17. Gamifying Self-Management of Chronic Illnesses: A Mixed-Methods Study

    Science.gov (United States)

    Wills, Gary; Ranchhod, Ashok

    2016-01-01

    Background Self-management of chronic illnesses is an ongoing issue in health care research. Gamification is a concept that arose in the field of computer science and has been borrowed by many other disciplines. It is perceived by many that gamification can improve the self-management experience of people with chronic illnesses. This paper discusses the validation of a framework (called The Wheel of Sukr) that was introduced to achieve this goal. Objective This research aims to (1) discuss a gamification framework targeting the self-management of chronic illnesses and (2) validate the framework by diabetic patients, medical professionals, and game experts. Methods A mixed-method approach was used to validate the framework. Expert interviews (N=8) were conducted in order to validate the themes of the framework. Additionally, diabetic participants completed a questionnaire (N=42) in order to measure their attitudes toward the themes of the framework. Results The results provide a validation of the framework. This indicates that gamification might improve the self-management of chronic illnesses, such as diabetes. Namely, the eight themes in the Wheel of Sukr (fun, esteem, socializing, self-management, self-representation, motivation, growth, sustainability) were perceived positively by 71% (30/42) of the participants with P value gamification in the self-management of diabetes. PMID:27612632

  18. Implementation of a standardized out-of-hospital management method for Parkinson dysphagia

    Directory of Open Access Journals (Sweden)

    Hongying Wei

    Full Text Available Summary Objective: Our objective is to explore the effectiveness and feasibility of establishing a swallowing management clinic to implement out-of-hospital management for Parkinson disease (PD patients with dysphagia. Method: Two-hundred seventeen (217 voluntary PD patients with dysphagia in a PD outpatient clinic were divided into a control group with 100 people, and an experimental group with 117 people. The control group was given dysphagia rehabilitation guidance. The experimental group was presented with the standardized out-of-hospital management method as overall management and information and education materials. Rehabilitation efficiency and incidence rate of dysphagia, as well as relevant complications of both groups were compared after a 6-month intervention. Results: Rehabilitation efficiency and the incidence rate of dysphagia including relevant complications of patients treated with the standardized out-of-hospital management were compared with those seen in the control group. The differences have distinct statistics meaning (p<0.01. Conclusion: Establishing a swallowing management protocol for outpatient setting can effectively help the recovery of the function of swallowing, reduce the incidence rate of dysphagia complications and improve the quality of life in patients with PD.

  19. Life cycle assessment of municipal solid waste management methods: Ankara case study.

    Science.gov (United States)

    Ozeler, D; Yetiş, U; Demirer, G N

    2006-04-01

    Different solid waste management system scenarios were developed and compared for the Municipal Solid Waste Management System of Ankara by using the life cycle assessment (LCA) methodology. The solid waste management methods considered in the scenarios were collection and transportation of wastes, source reduction, Material Recovery Facility (MRF)/Transfer Stations (TS), incineration, anaerobic digestion and landfilling. The goal of the study was to determine the most environmentally friendly option of MSWM system for Ankara. The functional unit of the study was the amount of solid waste generated in the system area of concern, which are the districts of Ankara. The life cycle inventory analysis was carried out by IWM Model-1. The inputs and outputs of each management stage were defined and the inventory emissions calculated by the model were classified in to impact categories; non-renewable energy sources exhausting potential, final solid waste as hazardous and non-hazardous, global warming, acidification, eutrophication and human toxicity. The impacts were quantified with the weighing factors of each category to develop the environmental profiles of each scenario. In most of the categories, Source Reduction Scenario was found to be the most feasible management method, except the global warming category. The lowest contribution to GWP was calculated for the anaerobic digestion process. In the interpretation and improvement assessment stage, the results were further evaluated and recommendations were made to improve the current solid waste management system of Ankara.

  20. Online Methods of Managing Auditory Hallucinations: A New Trend to Understand Psychopathology.

    Science.gov (United States)

    Sharma, Manoj Kumar; Mahindru, Poornima

    2017-01-01

    Treatment seekers use various coping methods to reduce the distress associated with auditory hallucinations. With the increase use of technology, the technology means are also in use to manage the auditory hallucination. The current report documents the implications of technology means for the management of auditory hallucinations. The user was assessed using clinical interview, internet addiction test, problematic online gaming questionnaire, and screening questions for technology addiction. It showed the use of technology to manage the auditory hallucinations. Psychotherapy work revealed a reduction in their use of technology means at follow-up. It implies to evolve the therapeutic use of technology means and development of alternative therapeutic means to manage the auditory hallucinations.

  1. Nonpharmacological methods in managing patients with dementia in a tertiary care hospital.

    Science.gov (United States)

    Pandey, Nisha Mani; Tripathi, Shailendra Mohan; Singh, Bhupendra; Tiwari, Sarvada Chandra

    2018-01-01

    Management of dementia is very crucial. Nonpharmacological methods (NPM) are well appreciated and encouraged to be used as first-line treatment for managing elderly patients with dementia (PwD). The present case reports aimed to share the strategies of NPM for managing PwD. NPM requires a structured blueprint to record, follow-up, and monitor the outcomes. A structured proforma has been developed in the department. After getting all the basic information from the patient, needed assessments are being done by the concerned team member to identify and rate the level of severity of the problem, and specific NPM strategies are being provided. Concerted efforts give positive results; knowledge and understanding about the illness help the caregiver in managing the patient. No negative impact has been reported; NPM is a cost-effective approach and therefore should be studied on a larger level to provide evidence from India and prove its efficacy.

  2. An optimum fuel management method based on CANDU in-core detector readings

    International Nuclear Information System (INIS)

    Jeong, Chang Joon; Choi, Hang Bok

    2001-01-01

    In this study, a new optimal fuel management method is developed for a CANDU 600 MWe (CANDU-6) reactor. At first, an efficient power mapping method has been developed, which provides an accurate core status of an operating CANDU reactor. Secondly, an optimum refueling channel selection method has been developed by an optimization theory. For the power mapping method, the measured detector readings are used as boundary conditions of the diffusion theory calculation with the Kalman filtering (DIKAL) method. The performance of the DIKAL method was assessed for various core states and applied to the calculation of power and flux distribution in the CANDU 6 reactor. Sensitivity studies have shown that DIKAL method is insensitive to the detector random and systematic errors. An optimal refueling simulation method (OPTIMA), practically applicable to a CANDU 6 reactor, has also been developed. The objective of the optimization is to reproduce the reference core performance during refueling simulation, while satisfying the operation limits of channel and bundle powers. The optimization process consists of two stages: i) elimination of candidate refueling channels by several constraints and ii) selection of refueling channels by a direct search method that uses sensitivity coefficients of channel power generated for the reference core. The elimination process sorts out an appropriate number of fuel channels suitable for refueling, considering the channel power, bundle power and fuel burnup. The optimum refueling channels are then selected such that the difference of power distribution from the reference is minimized. In order to demonstrate the applicability of the overall fuel management methodology developed in this study, the DIKAL-OPTIMA method was applied to Wolsong-3 reactor refueling simulation, which is a typical CANDU-6 reactor. The results of refueling simulation have shown that the method can be efficiently used for the performance analysis of the operating

  3. An optimum fuel management method based on CANDU in-core detector readings

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Chang Joon; Choi, Hang Bok

    2001-01-01

    In this study, a new optimal fuel management method is developed for a CANDU 600 MWe (CANDU-6) reactor. At first, an efficient power mapping method has been developed, which provides an accurate core status of an operating CANDU reactor. Secondly, an optimum refueling channel selection method has been developed by an optimization theory. For the power mapping method, the measured detector readings are used as boundary conditions of the diffusion theory calculation with the Kalman filtering (DIKAL) method. The performance of the DIKAL method was assessed for various core states and applied to the calculation of power and flux distribution in the CANDU 6 reactor. Sensitivity studies have shown that DIKAL method is insensitive to the detector random and systematic errors. An optimal refueling simulation method (OPTIMA), practically applicable to a CANDU 6 reactor, has also been developed. The objective of the optimization is to reproduce the reference core performance during refueling simulation, while satisfying the operation limits of channel and bundle powers. The optimization process consists of two stages: i) elimination of candidate refueling channels by several constraints and ii) selection of refueling channels by a direct search method that uses sensitivity coefficients of channel power generated for the reference core. The elimination process sorts out an appropriate number of fuel channels suitable for refueling, considering the channel power, bundle power and fuel burnup. The optimum refueling channels are then selected such that the difference of power distribution from the reference is minimized. In order to demonstrate the applicability of the overall fuel management methodology developed in this study, the DIKAL-OPTIMA method was applied to Wolsong-3 reactor refueling simulation, which is a typical CANDU-6 reactor. The results of refueling simulation have shown that the method can be efficiently used for the performance analysis of the operating

  4. The New Corporate Conflicts Management: The Use of Appropriate Methods for Prevention, Management and Resolution of Organizational Conflicts

    Directory of Open Access Journals (Sweden)

    Flavia Antonella Godinho Pereira

    2016-11-01

    Full Text Available The organizations become more aware of the rising cost of conflict (in economic, relational and human terms, so they are seeking to manage conflict more efficiently. The intent of this article is to present some Alternative Dispute Resolution methods and show how they may become valuable to business organizations. The conclusion is that the existence of conflict is a necessary catalyst that allows a company to survive and progress. The goal in dealing with the conflict is not to eliminate it, but to respond to it constructively.

  5. Methods and computer programs for PWR's fuel management: Programs Sothis and Ciclon

    International Nuclear Information System (INIS)

    Aragones, J.M.; Corella, M.R.; Martinez-Val, J.M.

    1976-01-01

    Methos and computer programs developed at JEN for fuel management in PWR are discussed, including scope of model, procedures for sistematic selection of alternatives to be evaluated, basis of model for neutronic calculation, methods for fuel costs calculation, procedures for equilibrium and trans[tion cycles calculation with Soth[s and Ciclon codes and validation of methods by comparison of results with others of reference (author) ' [es

  6. A Method for Evaluating Competency in Assessment and Management of Suicide Risk

    Science.gov (United States)

    Hung, Erick K.; Binder, Renee L.; Fordwood, Samantha R.; Hall, Stephen E.; Cramer, Robert J.; McNiel, Dale E.

    2012-01-01

    Objective: Although health professionals increasingly are expected to be able to assess and manage patients' risk for suicide, few methods are available to evaluate this competency. This report describes development of a competency-assessment instrument for suicide risk-assessment (CAI-S), and evaluates its use in an objective structured clinical…

  7. Managing aging workers: a mixed methods study on bundles of HR practices for aging workers

    NARCIS (Netherlands)

    Kooij, Dorien T. A. M.; Jansen, Paul G. W.; Dikkers, Josje S. E.; de Lange, Annet H.

    2014-01-01

    Since abilities and motives change with age and common human resource (HR) practices might be less suitable for aging employees, scholars and practitioners are currently challenged to find new ways of managing aging workers and motivating them to continue working. Therefore, this mixed methods study

  8. A nodal Grean's function method of reactor core fuel management code, NGCFM2D

    International Nuclear Information System (INIS)

    Li Dongsheng; Yao Dong.

    1987-01-01

    This paper presents the mathematical model and program structure of the nodal Green's function method of reactor core fuel management code, NGCFM2D. Computing results of some reactor cores by NGCFM2D are analysed and compared with other codes

  9. 7 CFR 1780.47 - Borrower accounting methods, management reporting and audits.

    Science.gov (United States)

    2010-01-01

    ... accrual basis of accounting, in accordance with generally accepted accounting principles (GAAP), unless... organization may maintain its accounting records on a basis other than accrual accounting, and make the... 7 Agriculture 12 2010-01-01 2010-01-01 false Borrower accounting methods, management reporting and...

  10. Potential Use of Agile Methods in Selected DoD Acquisitions: Requirements Development and Management

    Science.gov (United States)

    2014-04-01

    guidelines. 9 Kanban is a technique for managing workflow originating from the lean engineering methods pioneered by Toyota. [Reinertsen 2009...Cockburn, Alistair, & Pols, Andy. Patterns for Effective Use Cas- es. Addison-Wesley, 2002. Anderson, David. Kanban . Blue Hole Press, 2010. CMU/SEI-2013

  11. Investigating the management of diabetes in nursing homes using a mixed methods approach.

    LENUS (Irish Health Repository)

    Hurley, L

    2017-03-21

    As populations age there is an increased demand for nursing home (NH) care and a parallel increase in the prevalence of diabetes. Despite this, there is growing evidence that the management of diabetes in NHs is suboptimal. The reasons for this are complex and poorly understood. This study aimed to identify the current level of diabetes care in NHs using a mixed methods approach.

  12. Use of Modern Methods of Credit Portfolio Risk Management in Commercial Banks of Russian Federation

    Directory of Open Access Journals (Sweden)

    Dmitrii S. Melnyk

    2013-01-01

    Full Text Available The article deals with the structure and factors of credit portfolio risk, analyses existing models of portfolio risk assessment and develops recommendations on the implementation of risk management adapted methods, presents recommendations on the optimization of the approach to credit risk minimization in Russian banking system.

  13. Organizational flexibility as a challenge of contemporary management. Determinants and methods of measurement

    Directory of Open Access Journals (Sweden)

    Piotr Buła

    2011-12-01

    Full Text Available Purpose: This paper has been aimed at defining contemporary management flexibility determinants and the methods of its measurement. Problem investigated: This paper presents an analysis of organizational flexibility determinants related to the contemporary concepts and challenges within the area of management. The discussion includes two types of measurement of organizational flexibility based on declarative tests and quantitative criteria. The described methods are subject to evaluation. The paper also presents authors' own proposal for determinants classification, organizational flexibility assessment and an exemplary application. Methodology: The paper has been based on the results of research on organizational flexibility conducted by the Department of Business Studies Aalborg University (Denmark and Wrocław University of Economics (Poland. Conclusion: Organizational flexibility constitutes one of the major challenges of contemporary management. This issue has already been extensively discussed, however, despite numerous publications and relevant research projects many issues still need to be resolved. One of them is organizational flexibility measurement. In the first place, it needs a description of flexibility determinants relevant to a certain organization. There are no objective methods that would allow a description of the set of determinants since they are dependent on organization's special features and individually set objectives. In addition, it should be noted that those factors are subject to change, in line with the development of theory and concepts of management. The very flexibility measurement requires simultaneous application of various methods of factor analysis and polling stakeholder opinions.

  14. Instructional Design as Knowledge Management: A Knowledge-in-Practice Approach to Choosing Instructional Methods

    Science.gov (United States)

    McIver, Derrick; Fitzsimmons, Stacey; Flanagan, David

    2016-01-01

    Decisions about instructional methods are becoming more complex, with options ranging from problem sets to experiential service-learning projects. However, instructors not trained in instructional design may make these important decisions based on convenience, comfort, or trends. Instead, this article draws on the knowledge management literature…

  15. Lean programm as a method of managing lean changes in the company

    Directory of Open Access Journals (Sweden)

    Suetina Tatiana Aleksandrovna

    2012-12-01

    Full Text Available This article is about methods and ways of providing changes on enterprices which introduce instruments of lean production. The main accent is how to use metodology of the project management by providing lean-changes. Lean program is proposed as a program of strategic developement of enterprices.

  16. Management of inpatient aggression in forensic mental health nursing : the application of the Early Recognition Method

    NARCIS (Netherlands)

    Fluttert, F.A.J.

    2011-01-01

    Management of Inpatient Aggression in Forensic Mental Health Nursing. The application of the Early Recognition Method. Forensic mental health nurses take care of forensic patients convicted for an offense for which they were assessed not to be fully accountable due to their psychiatric disorder. For

  17. Alternative Methods in the Evaluation of School District Cash Management Programs.

    Science.gov (United States)

    Dembowski, Frederick L.

    1980-01-01

    Empirically evaluates three measures of effectiveness of school district cash management: the rate of return method in common use and two new measures--efficiency rating and Net Present Value (NPV). The NPV approach allows examination of efficiency and provides a framework for evaluating other areas of educational policy. (Author/IRT)

  18. On the relationship between EFL teachers’ classroom management approaches and the dominant teaching style: A mixed method study

    OpenAIRE

    Ali Kazemi; Neda Soleimani

    2016-01-01

    As a factor contributing to a successful teaching career, classroom management can be affected by many latent and explicit variables. In this mixed method study, the researchers sought to scrutinize the possible connections among EFL teachers' classroom management approaches at two dimensions of behavior management and instructional management and the dominant teaching style. To this end, the researchers administered the Behavior and Instructional Management Scale (BIMS) ...

  19. Balancing nurses' workload in hospital wards: study protocol of developing a method to manage workload.

    Science.gov (United States)

    van den Oetelaar, W F J M; van Stel, H F; van Rhenen, W; Stellato, R K; Grolman, W

    2016-11-10

    Hospitals pursue different goals at the same time: excellent service to their patients, good quality care, operational excellence, retaining employees. This requires a good balance between patient needs and nursing staff. One way to ensure a proper fit between patient needs and nursing staff is to work with a workload management method. In our view, a nursing workload management method needs to have the following characteristics: easy to interpret; limited additional registration; applicable to different types of hospital wards; supported by nurses; covers all activities of nurses and suitable for prospective planning of nursing staff. At present, no such method is available. The research follows several steps to come to a workload management method for staff nurses. First, a list of patient characteristics relevant to care time will be composed by performing a Delphi study among staff nurses. Next, a time study of nurses' activities will be carried out. The 2 can be combined to estimate care time per patient group and estimate the time nurses spend on non-patient-related activities. These 2 estimates can be combined and compared with available nursing resources: this gives an estimate of nurses' workload. The research will take place in an academic hospital in the Netherlands. 6 surgical wards will be included, capacity 15-30 beds. The study protocol was submitted to the Medical Ethical Review Board of the University Medical Center (UMC) Utrecht and received a positive advice, protocol number 14-165/C. This method will be developed in close cooperation with staff nurses and ward management. The strong involvement of the end users will contribute to a broader support of the results. The method we will develop may also be useful for planning purposes; this is a strong advantage compared with existing methods, which tend to focus on retrospective analysis. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence

  20. Asthma management simulation for children: translating theory, methods, and strategies to effect behavior change.

    Science.gov (United States)

    Shegog, Ross; Bartholomew, L Kay; Gold, Robert S; Pierrel, Elaine; Parcel, Guy S; Sockrider, Marianna M; Czyzewski, Danita I; Fernandez, Maria E; Berlin, Nina J; Abramson, Stuart

    2006-01-01

    Translating behavioral theories, models, and strategies to guide the development and structure of computer-based health applications is well recognized, although a continued challenge for program developers. A stepped approach to translate behavioral theory in the design of simulations to teach chronic disease management to children is described. This includes the translation steps to: 1) define target behaviors and their determinants, 2) identify theoretical methods to optimize behavioral change, and 3) choose educational strategies to effectively apply these methods and combine these into a cohesive computer-based simulation for health education. Asthma is used to exemplify a chronic health management problem and a computer-based asthma management simulation (Watch, Discover, Think and Act) that has been evaluated and shown to effect asthma self-management in children is used to exemplify the application of theory to practice. Impact and outcome evaluation studies have indicated the effectiveness of these steps in providing increased rigor and accountability, suggesting their utility for educators and developers seeking to apply simulations to enhance self-management behaviors in patients.

  1. Effective management models and methods of economic educations in regional industrial complexes

    Directory of Open Access Journals (Sweden)

    Andrey Gennadyevich Butrin

    2014-06-01

    Full Text Available In the article, the methodical bases of management by the integrated industrial enterprises is developed according to the indicators of sustainable economic development of the region. The scope of the research is the region as the difficult mesosystem consisting of logistic clusters. The subject matter of the research is the organizational and economic relations developing in the course of interaction of participants of the regional economy as mesosystems. The models and methods of management by the large economic systems in the economy of the industrially developed region are developed; the organizational and economic essence of a logistic cluster as the subject of the regional economy us revealed. The mechanism of management by the integrated enterprises with using the cluster approach, technologies of logistics, management of supply chains is offered. They allow to the management of an enterprises to make scientifically reasonable effective decisions developing programs of supply, economic production and realization of finished goods in the close connection with programs of regional economic development.

  2. Individualized drug dosing using RBF-Galerkin method: Case of anemia management in chronic kidney disease.

    Science.gov (United States)

    Mirinejad, Hossein; Gaweda, Adam E; Brier, Michael E; Zurada, Jacek M; Inanc, Tamer

    2017-09-01

    Anemia is a common comorbidity in patients with chronic kidney disease (CKD) and is frequently associated with decreased physical component of quality of life, as well as adverse cardiovascular events. Current treatment methods for renal anemia are mostly population-based approaches treating individual patients with a one-size-fits-all model. However, FDA recommendations stipulate individualized anemia treatment with precise control of the hemoglobin concentration and minimal drug utilization. In accordance with these recommendations, this work presents an individualized drug dosing approach to anemia management by leveraging the theory of optimal control. A Multiple Receding Horizon Control (MRHC) approach based on the RBF-Galerkin optimization method is proposed for individualized anemia management in CKD patients. Recently developed by the authors, the RBF-Galerkin method uses the radial basis function approximation along with the Galerkin error projection to solve constrained optimal control problems numerically. The proposed approach is applied to generate optimal dosing recommendations for individual patients. Performance of the proposed approach (MRHC) is compared in silico to that of a population-based anemia management protocol and an individualized multiple model predictive control method for two case scenarios: hemoglobin measurement with and without observational errors. In silico comparison indicates that hemoglobin concentration with MRHC method has less variation among the methods, especially in presence of measurement errors. In addition, the average achieved hemoglobin level from the MRHC is significantly closer to the target hemoglobin than that of the other two methods, according to the analysis of variance (ANOVA) statistical test. Furthermore, drug dosages recommended by the MRHC are more stable and accurate and reach the steady-state value notably faster than those generated by the other two methods. The proposed method is highly efficient for

  3. Sustainability in Organizations: The Application of the Gaia Method for Managing Environmental Impact on a Company

    Directory of Open Access Journals (Sweden)

    Celso Giancarlo Duarte de Mazo

    2015-12-01

    Full Text Available This article demonstrates a method of managing environmental impacts, thus assessing the degree of sustainability of an organization.As an object of study, the GAIA (Gerenciamento de Aspectos e Impactos Ambientais = Management of Environmental Aspects and Impacts method for management of environmental aspects and impacts was used, based on the development of three fundamental stages: awareness, knowledge and training, having been applied to a small company in the baking business. A bibliographical research on business sustainability was carried out so theoretical basis could support field research. By way of a questionnaire and interviews, it was identified that the company has sustainability indicators at a good level, as the GAIA method states. The research presented data that confirm the efficiency of the GAIA method, with the identification of data that make it possible to determine strategies to develop actions that improve the company’s social and environmental sustainability. For future studies, we suggest that the focus of this method be expanded, thus deepening the issue of socioeconomic indicators.

  4. [Quality management in surgery--an overview of methods and possibilities].

    Science.gov (United States)

    Schmidt, C; Möller, J; Reibe, F; Güntert, B; Kremer, B

    2003-06-01

    Numerous methods of assessing quality in health care have been presented over the last years. Since the German health care reform of 2000 introduced a legal obligation to quality assurance, hospitals have to meet that condition. However, no specific system of quality assurance was implicated. Therefore, many potential users search for systems suiting their own needs. However, German hospitals can benefit from international experience in quality management. Accreditation, visitation, excellence schemes, and certification seem to be the dominant methods. Every method is worthy of hospital evaluation. Certifications illustrate the quality system view without regard to profession, while excellence schemes evaluate the development of quality management in hospitals. Accreditation portrays a specific hospital as a whole, while visitations follow the professional perspective of quality assurance. Depending on the perspective and aims, there are advantages and disadvantages in each method. Finally, a combination of two may also be helpful. Indeed, no "role model" exists yet for assessing quality in health care. These methods of quality management are applicable especially in surgery, because a variety of standard outcome parameters such as length of stay, duration of procedure, and complication and relapse rates are already available.

  5. Assessment method for analyzing and developing human resource management practices in nuclear power industry

    International Nuclear Information System (INIS)

    Maeki, E.; Pahkin, K.; Lindstroem, S.; Kurki, A-L.

    2014-01-01

    Implementation of HRM practices is often devolved from the HRM unit to front line managers and supervisors. However, the implementation of these practices by line managers and supervisors may vary significantly. They may, for example, be unaware of how to implement HRM practices or skeptical towards the effectiveness of the intended practices. Based on the literature, interviews and workshops in the nuclear power industry, a self-assessment method of HRM practices for intra-organizational use was developed. The assessment method was piloted in four nuclear power organizations. The assessment method seems to be a good tool for generating fruitful discussion on HRM practices, finding areas of HRM practices that need to be developed, and triggering peer-to-peer knowledge sharing and learning on HRM practices. (authors)

  6. Assessment method for analyzing and developing human resource management practices in the nuclear power industry

    International Nuclear Information System (INIS)

    Maeki, Eerikki; Pahkin, Krista; Lindstroem, S.; Kurki, Anna-Leena

    2015-01-01

    Implementation of HRM practices is often devolved from the HRM unit to front line managers and supervisors. However, the implementation of these practices by line managers and supervisors may vary significantly. They may, for example, be unaware of how to implement HRM practices or sceptical towards the effectiveness of the intended practices. Based on the literature, interviews and workshops in the nuclear power industry, a self-assessment method of HRM practices for intra-organizational use was developed. The assessment method was piloted in four nuclear power organizations. The assessment method seems to be a good tool for generating fruitful discussion on HRM practices, finding areas of HRM practices that need to be developed, and triggering peer-to-peer knowledge sharing and learning on HRM practices.

  7. Assessment method for analyzing and developing human resource management practices in the nuclear power industry

    Energy Technology Data Exchange (ETDEWEB)

    Maeki, Eerikki [Aalto Univ. (Finland). Dept. of Industrial Engineering and Management; Pahkin, Krista; Lindstroem, S.; Kurki, Anna-Leena [Finnish Institue of Occupational Health, Helsinki (Finland). Centre of Expertise for the Development of Work and Organizations

    2015-04-15

    Implementation of HRM practices is often devolved from the HRM unit to front line managers and supervisors. However, the implementation of these practices by line managers and supervisors may vary significantly. They may, for example, be unaware of how to implement HRM practices or sceptical towards the effectiveness of the intended practices. Based on the literature, interviews and workshops in the nuclear power industry, a self-assessment method of HRM practices for intra-organizational use was developed. The assessment method was piloted in four nuclear power organizations. The assessment method seems to be a good tool for generating fruitful discussion on HRM practices, finding areas of HRM practices that need to be developed, and triggering peer-to-peer knowledge sharing and learning on HRM practices.

  8. Gamifying Self-Management of Chronic Illnesses: A Mixed-Methods Study.

    Science.gov (United States)

    AlMarshedi, Alaa; Wills, Gary; Ranchhod, Ashok

    2016-09-09

    Self-management of chronic illnesses is an ongoing issue in health care research. Gamification is a concept that arose in the field of computer science and has been borrowed by many other disciplines. It is perceived by many that gamification can improve the self-management experience of people with chronic illnesses. This paper discusses the validation of a framework (called The Wheel of Sukr) that was introduced to achieve this goal. This research aims to (1) discuss a gamification framework targeting the self-management of chronic illnesses and (2) validate the framework by diabetic patients, medical professionals, and game experts. A mixed-method approach was used to validate the framework. Expert interviews (N=8) were conducted in order to validate the themes of the framework. Additionally, diabetic participants completed a questionnaire (N=42) in order to measure their attitudes toward the themes of the framework. The results provide a validation of the framework. This indicates that gamification might improve the self-management of chronic illnesses, such as diabetes. Namely, the eight themes in the Wheel of Sukr (fun, esteem, socializing, self-management, self-representation, motivation, growth, sustainability) were perceived positively by 71% (30/42) of the participants with P value gamification in the self-management of diabetes.

  9. Implementation of Statistical Methods and SWOT Analysis for Evaluation of Metal Waste Management in Engineering Company

    Directory of Open Access Journals (Sweden)

    Záhorská Renáta

    2016-12-01

    Full Text Available This paper presents the results of the waste management research in a selected engineering company RIBE Slovakia, k. s., Nitra factory. Within of its manufacturing programme, the mentioned factory uses wide range of the manufacturing technologies (cutting operations, metal cold-forming, thread rolling, metal surface finishing, automatic sorting, metrology, assembly, with the aim to produce the final products – connecting components (fasteners delivered to many industrial fields (agricultural machinery manufacturers, car industry, etc.. There were obtained data characterizing production technologies and the range of manufactured products. The key attention is paid to the classification of waste produced by engineering production and to waste management within the company. Within the research, there were obtained data characterizing the time course of production of various waste types and these data were evaluated by means of statistical method using STATGRAPHICS. Based on the application of SWOT analysis, there is objectively assessed the waste management in the company in terms of strengths and weaknesses, as well as determination of the opportunities and potential threats. Results obtained by the SWOT analysis application have allowed to come to conclusion that the company RIBE Slovakia, k. s., Nitra factory has well organized waste management system. The fact that the waste management system is incorporated into the company management system can be considered as an advantage.

  10. A Proposal of Operational Risk Management Method Using FMEA for Drug Manufacturing Computerized System

    Science.gov (United States)

    Takahashi, Masakazu; Nanba, Reiji; Fukue, Yoshinori

    This paper proposes operational Risk Management (RM) method using Failure Mode and Effects Analysis (FMEA) for drug manufacturing computerlized system (DMCS). The quality of drug must not be influenced by failures and operational mistakes of DMCS. To avoid such situation, DMCS has to be conducted enough risk assessment and taken precautions. We propose operational RM method using FMEA for DMCS. To propose the method, we gathered and compared the FMEA results of DMCS, and develop a list that contains failure modes, failures and countermeasures. To apply this list, we can conduct RM in design phase, find failures, and conduct countermeasures efficiently. Additionally, we can find some failures that have not been found yet.

  11. A Multidimensional and Multimembership Clustering Method for Social Networks and Its Application in Customer Relationship Management

    Directory of Open Access Journals (Sweden)

    Peixin Zhao

    2013-01-01

    Full Text Available Community detection in social networks plays an important role in cluster analysis. Many traditional techniques for one-dimensional problems have been proven inadequate for high-dimensional or mixed type datasets due to the data sparseness and attribute redundancy. In this paper we propose a graph-based clustering method for multidimensional datasets. This novel method has two distinguished features: nonbinary hierarchical tree and the multi-membership clusters. The nonbinary hierarchical tree clearly highlights meaningful clusters, while the multimembership feature may provide more useful service strategies. Experimental results on the customer relationship management confirm the effectiveness of the new method.

  12. Method of Choosing the Information Technology System Supporting Management of the Military Aircraft Operation

    Directory of Open Access Journals (Sweden)

    Barszcz Piotr

    2014-12-01

    Full Text Available The paper presents a method of choosing the information technology system, the task of which is to support the management process of the military aircraft operation. The proposed method is based on surveys conducted among direct users of IT systems used in aviation of the Polish Armed Forces. The analysis of results of the surveys was conducted using statistical methods. The paper was completed with practical conclusions related to further usefulness of the individual information technology systems. In the future, they can be extremely useful in the process of selecting the best solutions and integration of the information technology systems

  13. Prioritization of manufacturing sectors in Serbia for energy management improvement – AHP method

    International Nuclear Information System (INIS)

    Jovanović, Bojana; Filipović, Jovan; Bakić, Vukman

    2015-01-01

    Highlights: • We used AHP method to prioritize manufacturing sectors in Serbia. • Priorities for energy management improvement according to five criteria. • Rank 1 – “Manufacture of food products”. • Rank 2 – “Manufacture of motor vehicles, trailers and semi-trailers”. • Rank 3 – “Manufacture of other non-metallic mineral products”. - Abstract: Manufacturing, which is destined to play the most significant role in the reindustrialization of Serbia is also one of the largest energy consumers and environmental polluters. In accordance with this, a large number of energy and environment management initiatives have been implemented over the years. In developed countries, these initiatives are at an advanced level, but not in Serbia. A group of manufacturers in Serbia has recognized the significance of the environmental initiatives implementation, but the interest in energy management improvement has remained low. Although these initiatives can be used to achieve cost reduction in industry, not all the manufacturing sectors equally value the importance of energy management improvement. Among all the manufacturing sectors, it is necessary to prioritize those with the potentials for energy management improvement, which can be done using different methods. In this paper, the AHP (Analytic Hierarchy Process) method was used to prioritize manufacturing sectors in Serbia in the area of energy management improvement. Using a created AHP questionnaires criteria weights were selected. These questionnaires were completed by the experts from the Serbian Chamber of Commerce and Industry, providing us with the opportunity to evaluate the Serbian manufacturing sectors based on the real life data. The results of the AHP method, which was used as the prioritization instrument, and their analysis are presented in the paper. As a part of a wider study, aimed at the improvement of the energy management in Serbia, the three manufacturing sectors with the highest

  14. Penalty Algorithm Based on Conjugate Gradient Method for Solving Portfolio Management Problem

    Directory of Open Access Journals (Sweden)

    Wang YaLin

    2009-01-01

    Full Text Available A new approach was proposed to reformulate the biobjectives optimization model of portfolio management into an unconstrained minimization problem, where the objective function is a piecewise quadratic polynomial. We presented some properties of such an objective function. Then, a class of penalty algorithms based on the well-known conjugate gradient methods was developed to find the solution of portfolio management problem. By implementing the proposed algorithm to solve the real problems from the stock market in China, it was shown that this algorithm is promising.

  15. The method of Sample Management in Neutron Activation Analysis Laboratory-Serpong

    International Nuclear Information System (INIS)

    Elisabeth-Ratnawati

    2005-01-01

    In the testing laboratory used by neutron activation analysis method, sample preparation is the main factor and it can't be neglect. The error in the sample preparation can give result with lower accuracy. In this article is explained the scheme of sample preparation i.e sample receive administration, the separate of sample, fluid and solid sample preparation, sample grouping, irradiation, sample counting and holding the sample post irradiation. If the management of samples were good application based on Standard Operation Procedure, therefore each samples has good traceability. To optimize the management of samples is needed the trained and skilled personal and good facility. (author)

  16. Developing and managing embedded systems and products methods, techniques, tools, processes, and teamwork

    CERN Document Server

    Fowler, Kim

    2014-01-01

    This Expert Guide gives you the knowledge, methods and techniques to develop and manage embedded systems successfully.  It shows that teamwork, development procedures, and program management require unique and wide ranging skills to develop a system, skills that most people can attain with persistence and effort. With this book you will: Understand the various business aspects of a project from budgets and schedules through contracts and market studiesUnderstand the place and timing for simulations, bench tests, and prototypes, and understand the differences between various formal metho

  17. OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT WITH THE USE OF BRAINSTORMING METHOD

    Directory of Open Access Journals (Sweden)

    Artur Woźny

    2018-01-01

    Full Text Available Health and safety at work issue concerns every employer. Adjusting the work environment to legal requirements and standards is the key to creating health and safety culture. In every functioning OSH system there are various types of problems that employers face. The subject of the article is how to solve the problem of safety in production systems using the brainstorming method. The basic ele-ment of creating health and safety culture is an appropriate approach to occupational risk manage-ment. Risk assessment in the workplace should take place in teams as it is possible to reliably identi-fy hazards and accurately assess them.

  18. Research and technology management in the electricity industry methods, tools and case studies

    CERN Document Server

    Daim, Tugrul; Kim, Jisun

    2013-01-01

    Technologies such as renewable energy alternatives including wind, solar and biomass, storage technologies and electric engines are creating a different landscape for the  electricity industry. Using sources and ideas from technologies such as renewable energy alternatives, Research and Technology Management in the Electricity Industry explores a different landscape for this industry and applies it to the electric industry supported by real industry cases. Divided into three sections, Research and Technology Management in the Electricity Industry introduces a range of  methods and tools includ

  19. EXPLANATORY ECONOMETRIC METHOD FOR THE ANALYSIS OF THE BEHAVIOR MANAGEMENT IN ORGANIZATIONS IN ROMANIA

    Directory of Open Access Journals (Sweden)

    Rosca Constantin

    2011-07-01

    Full Text Available Our paper, entitled "Explanatory Econometric Method for the Analysis of the Behaviour Management in Organizations in Romania" reflects the wide opening of econometric modelling to quantify the Romanian management issues, representing a practical guidance on multiple recovery plans to fund the huge data collected as part COMOR project launched by the Scientific Society of Management in Romania to characterize the behaviour of managers in the Romanian economic organizations. Construction of these models offers possibilities for complex analysis, descriptive and factorial sequence of firms, counties, geographical areas, but comprehensive summary of studies on the macroeconomic level. Scientific knowledge through a comprehensive assessment of managerial behaviour in the most representative types of business organizations of all geographical areas of the country are, in the context of globalization, one way to prevent surprises market economy. Thus, the results of this exploratory research will provide economic environment, and not only strong argument for anticipating decisions in order to choose the best economic policies, with beneficial effects as conclusive and with as few undesirable implications. Research based on the opinions of thousands of respondents approved, processed through a variety of instruments subject of extensive econometric and interdisciplinary interpretation, psycho-socio-economic management, is a modest contribution to the affirmation of local scientific research that aim for theoretical and applied Romanian school of management by defining: - knowledge of behaviour management in all types of business organizations in Romania; - identifying the Romanian space dimensions of organizational culture as a reflection of the peculiarities of national culture and especially of the main ethnic-specific subcultures; - profile defining effective manager and leader of excellence in terms of character traits and their behaviour.

  20. Rehabilitation centers in change: participatory methods for managing redesign and renovation.

    Science.gov (United States)

    Lahtinen, Marjaana; Nenonen, Suvi; Rasila, Heidi; Lehtelä, Jouni; Ruohomäki, Virpi; Reijula, Kari

    2014-01-01

    The aim of this article is to describe a set of participatory methods that we have either developed or modified for developing future work and service environments to better suit renewable rehabilitation processes. We discuss the methods in a larger framework of change process model and participatory design. Rehabilitation organizations are currently in transition; customer groups, financing, services, and the processes of rehabilitation centers are changing. The pressure for change challenges the centers to develop both their processes and facilities. There is a need for methods that support change management. Four participatory methods were developed: future workshop, change survey, multi-method assessment tool, and participatory design generator cards. They were tested and evaluated in three rehabilitation centers at the different phases of their change process. The developed methods were considered useful in creating a mutual understanding of the change goals between different stakeholders, providing a good picture of the work community's attitudes toward the change, forming an integrated overview of the built and perceived environment, inspiring new solutions, and supporting the management in steering the change process. The change process model described in this article serves as a practical framework that combined the viewpoints of organizational and facility development. However, participatory design continues to face challenges concerning communication between different stakeholders, and further development of the methods and processes is still needed. Intervention studies could provide data on the success factors that enhance the transformations in the rehabilitation sector. Design process, methodology, organizational transformation, planning, renovation.

  1. A simplified method for quantitative assessment of the relative health and safety risk of environmental management activities

    International Nuclear Information System (INIS)

    Eide, S.A.; Smith, T.H.; Peatross, R.G.; Stepan, I.E.

    1996-09-01

    This report presents a simplified method to assess the health and safety risk of Environmental Management activities of the US Department of Energy (DOE). The method applies to all types of Environmental Management activities including waste management, environmental restoration, and decontamination and decommissioning. The method is particularly useful for planning or tradeoff studies involving multiple conceptual options because it combines rapid evaluation with a quantitative approach. The method is also potentially applicable to risk assessments of activities other than DOE Environmental Management activities if rapid quantitative results are desired

  2. Real options analysis for land use management: Methods, application, and implications for policy.

    Science.gov (United States)

    Regan, Courtney M; Bryan, Brett A; Connor, Jeffery D; Meyer, Wayne S; Ostendorf, Bertram; Zhu, Zili; Bao, Chenming

    2015-09-15

    Discounted cash flow analysis, including net present value is an established way to value land use and management investments which accounts for the time-value of money. However, it provides a static view and assumes passive commitment to an investment strategy when real world land use and management investment decisions are characterised by uncertainty, irreversibility, change, and adaptation. Real options analysis has been proposed as a better valuation method under uncertainty and where the opportunity exists to delay investment decisions, pending more information. We briefly review the use of discounted cash flow methods in land use and management and discuss their benefits and limitations. We then provide an overview of real options analysis, describe the main analytical methods, and summarize its application to land use investment decisions. Real options analysis is largely underutilized in evaluating land use decisions, despite uncertainty in policy and economic drivers, the irreversibility and sunk costs involved. New simulation methods offer the potential for overcoming current technical challenges to implementation as demonstrated with a real options simulation model used to evaluate an agricultural land use decision in South Australia. We conclude that considering option values in future policy design will provide a more realistic assessment of landholder investment decision making and provide insights for improved policy performance. Copyright © 2015 Elsevier Ltd. All rights reserved.

  3. Evaluating water management strategies in watersheds by new hybrid Fuzzy Analytical Network Process (FANP) methods

    Science.gov (United States)

    RazaviToosi, S. L.; Samani, J. M. V.

    2016-03-01

    Watersheds are considered as hydrological units. Their other important aspects such as economic, social and environmental functions play crucial roles in sustainable development. The objective of this work is to develop methodologies to prioritize watersheds by considering different development strategies in environmental, social and economic sectors. This ranking could play a significant role in management to assign the most critical watersheds where by employing water management strategies, best condition changes are expected to be accomplished. Due to complex relations among different criteria, two new hybrid fuzzy ANP (Analytical Network Process) algorithms, fuzzy TOPSIS (Technique for Order Preference by Similarity to Ideal Solution) and fuzzy max-min set methods are used to provide more flexible and accurate decision model. Five watersheds in Iran named Oroomeyeh, Atrak, Sefidrood, Namak and Zayandehrood are considered as alternatives. Based on long term development goals, 38 water management strategies are defined as subcriteria in 10 clusters. The main advantage of the proposed methods is its ability to overcome uncertainty. This task is accomplished by using fuzzy numbers in all steps of the algorithms. To validate the proposed method, the final results were compared with those obtained from the ANP algorithm and the Spearman rank correlation coefficient is applied to find the similarity in the different ranking methods. Finally, the sensitivity analysis was conducted to investigate the influence of cluster weights on the final ranking.

  4. BIBLIOGRAPHIC STUDY IN RISK MANAGEMENT AIMED TO IDENTIFY MORE REFERENCED TOOLS, METHODS AND RELATIONSHIPS

    Directory of Open Access Journals (Sweden)

    Alamir Costa Louro

    2015-06-01

    Full Text Available The objective of this paper is to identify and discuss trends in tools and methods used in project risk management and its relationship to other matters, using current scientific articles. The focus isn´t in understanding how they work in technical terms, but think about the possibilities of deepening in academic studies, including making several suggestions for future research. Adjacent to the article there is a discussion about an alleged "one best way" imperative normativity approach. It was answered the following research questions: what subjects and theories are related to project risk management tools and methods? The first contribution is related to the importance of the academic Chris Chapman as an author who has more published and also more referenced in the survey. There are several contributions on various subjects such as: the perception of the existence of many conceptual papers; papers about construction industry, problematization of contracts according to agency theory, IT and ERPs issues. Other contributions came from the bibliometric method that brings lot of consolidated information about terms, topics, authors, references, periods and, of course, methods and tools about Project Risk Management.

  5. Use of a fuzzy decision-making method in evaluating severe accident management strategies

    International Nuclear Information System (INIS)

    Jae, M.; Moon, J.H.

    2002-01-01

    In developing severe accident management strategies, an engineering decision would be made based on the available data and information that are vague, imprecise and uncertain by nature. These sorts of vagueness and uncertainty are due to lack of knowledge for the severe accident sequences of interest. The fuzzy set theory offers a possibility of handling these sorts of data and information. In this paper, the possibility to apply the decision-making method based on fuzzy set theory to the evaluation of the accident management strategies at a nuclear power plant is scrutinized. The fuzzy decision-making method uses linguistic variables and fuzzy numbers to represent the decision-maker's subjective assessments for the decision alternatives according to the decision criteria. The fuzzy mean operator is used to aggregate the decision-maker's subjective assessments, while the total integral value method is used to rank the decision alternatives. As a case study, the proposed method is applied to evaluating the accident management strategies at a nuclear power plant

  6. Using logic model methods in systematic review synthesis: describing complex pathways in referral management interventions.

    Science.gov (United States)

    Baxter, Susan K; Blank, Lindsay; Woods, Helen Buckley; Payne, Nick; Rimmer, Melanie; Goyder, Elizabeth

    2014-05-10

    There is increasing interest in innovative methods to carry out systematic reviews of complex interventions. Theory-based approaches, such as logic models, have been suggested as a means of providing additional insights beyond that obtained via conventional review methods. This paper reports the use of an innovative method which combines systematic review processes with logic model techniques to synthesise a broad range of literature. The potential value of the model produced was explored with stakeholders. The review identified 295 papers that met the inclusion criteria. The papers consisted of 141 intervention studies and 154 non-intervention quantitative and qualitative articles. A logic model was systematically built from these studies. The model outlines interventions, short term outcomes, moderating and mediating factors and long term demand management outcomes and impacts. Interventions were grouped into typologies of practitioner education, process change, system change, and patient intervention. Short-term outcomes identified that may result from these interventions were changed physician or patient knowledge, beliefs or attitudes and also interventions related to changed doctor-patient interaction. A range of factors which may influence whether these outcomes lead to long term change were detailed. Demand management outcomes and intended impacts included content of referral, rate of referral, and doctor or patient satisfaction. The logic model details evidence and assumptions underpinning the complex pathway from interventions to demand management impact. The method offers a useful addition to systematic review methodologies. PROSPERO registration number: CRD42013004037.

  7. Application of virtual reality methods to obesity prevention and management research.

    Science.gov (United States)

    Persky, Susan

    2011-03-01

    There is a great need for empirical evidence to inform clinical prevention and management of overweight and obesity. Application of virtual reality (VR) methods to this research agenda could present considerable advantages. Use of VR methods in basic and applied obesity prevention and treatment research is currently extremely limited. However, VR has been employed for social and behavioral research in many other domains where it has demonstrated validity and utility. Advantages of VR technologies as research tools include the ability to situate hypothetical research scenarios in realistic settings, tight experimental control inherent in virtual environments, the ability to manipulate and control any and all scenario elements, and enhanced behavioral measurement opportunities. The means by which each of these features could enhance obesity prevention and management research is discussed and illustrated in the context of an example research study. Challenges associated with the application of VR methods, such as technological limitations and cost, are also considered. By employing experimental VR methods to interrogate clinical encounters and other health-related situations, researchers may be able to elucidate causal relationships, strengthen theoretical models, and identify potential targets for intervention. In so doing, researchers stand to make important contributions to evidence-based practice innovation in weight management and obesity prevention. © 2011 Diabetes Technology Society.

  8. Management of cyber physical objects in the future Internet of Things methods, architectures and applications

    CERN Document Server

    Loscri, Valeria; Rovella, Anna; Fortino, Giancarlo

    2016-01-01

    This book focuses on new methods, architectures, and applications for the management of Cyber Physical Objects (CPOs) in the context of the Internet of Things (IoT). It covers a wide range of topics related to CPOs, such as resource management, hardware platforms, communication and control, and control and estimation over networks. It also discusses decentralized, distributed, and cooperative optimization as well as effective discovery, management, and querying of CPOs. Other chapters outline the applications of control, real-time aspects, and software for CPOs and introduce readers to agent-oriented CPOs, communication support for CPOs, real-world deployment of CPOs, and CPOs in Complex Systems. There is a focus on the importance of application of IoT technologies for Smart Cities.

  9. Changes of forest stands vulnerability to future wind damage resulting from different management methods

    DEFF Research Database (Denmark)

    Panferov, O.; Sogachev, Andrey; Ahrends, B.

    2010-01-01

    The structure of forests stands changes continuously as a result of forest growth and both natural and anthropogenic disturbances like windthrow or management activities – planting/cutting of trees. These structure changes can stabilize or destabilize forest stands in terms of their resistance...... to wind damage. The driving force behind the damage is the climate, but the magnitude and sign of resulting effect depend on tree species, management method and soil conditions. The projected increasing frequency of weather extremes in the whole and severe storms in particular might produce wide area...... damage in European forest ecosystems during the 21st century. To assess the possible wind damage and stabilization/destabilization effects of forest management a number of numeric experiments are carried out for the region of Solling, Germany. The coupled small-scale process-based model combining Brook90...

  10. ANALYSIS OF FORECASTING METHODS FROM THE POINT OF VIEW OF EARLY WARNING CONCEPT IN PROJECT MANAGEMENT

    Directory of Open Access Journals (Sweden)

    Florin POPESCU

    2017-12-01

    Full Text Available Early warning system (EWS based on a reliable forecasting process has become a critical component of the management of large complex industrial projects in the globalized transnational environment. The purpose of this research is to critically analyze the forecasting methods from the point of view of early warning, choosing those useful for the construction of EWS. This research addresses complementary techniques, using Bayesian Networks, which addresses both uncertainties and causality in project planning and execution, with the goal of generating early warning signals for project managers. Even though Bayesian networks have been widely used in a range of decision-support applications, their application as early warning systems for project management is still new.

  11. Computational methods in the pricing and risk management of modern financial derivatives

    Science.gov (United States)

    Deutsch, Hans-Peter

    1999-09-01

    In the last 20 years modern finance has developed into a complex mathematically challenging field. Very complicated risks exist in financial markets which need very advanced methods to measure and/or model them. The financial instruments invented by the market participants to trade these risk, the so called derivatives are usually even more complicated than the risks themselves and also sometimes generate new riks. Topics like random walks, stochastic differential equations, martingale measures, time series analysis, implied correlations, etc. are of common use in the field. This is why more and more people with a science background, such as physicists, mathematicians, or computer scientists, are entering the field of finance. The measurement and management of all theses risks is the key to the continuing success of banks. This talk gives insight into today's common methods of modern market risk management such as variance-covariance, historical simulation, Monte Carlo, “Greek” ratios, etc., including the statistical concepts on which they are based. Derivatives are at the same time the main reason for and the most effective means of conducting risk management. As such, they stand at the beginning and end of risk management. The valuation of derivatives and structured financial instruments is therefore the prerequisite, the condition sine qua non, for all risk management. This talk introduces some of the important valuation methods used in modern derivatives pricing such as present value, Black-Scholes, binomial trees, Monte Carlo, etc. In summary this talk highlights an area outside physics where there is a lot of interesting work to do, especially for physicists. Or as one of our consultants said: The fascinating thing about this job is that Arthur Andersen hired me not ALTHOUGH I am a physicist but BECAUSE I am a physicist.

  12. [Evaluation of disease management programmes--assessing methods and initial outcomes from a health economic perspective].

    Science.gov (United States)

    Birnbaum, Dana Sophie; Braun, Sebastian

    2010-01-01

    Evaluation represents a substantial component of the concept of Disease Management Programmes. This and the fact that the implementation of Disease Management Programmes constitutes a major change in the German healthcare system require that the criteria established by the German Federal Social Insurance Authority (Bundesversicherungsamt) be carefully reviewed. The present paper focuses on the evaluation method and the economic data. The pre-/-post study design used in the evaluation is known to be vulnerable to threats to internal validity. The objective of this paper is to analyze whether these threats to internal validity which have been known theoretically are confirmed by the results of the final reports. A review of the final reports of health insurance companies like the AOK, Barmer and a group of the BKK in Westfalen-Lippe shows that this question can be answered in the affirmative. The pre-/-post design without control groups is unable to recognize the failure or success of the Disease Management concept. The reasons include a high drop-out rate as well as the lack of consideration of the characteristics of chronic disease. Hence the evaluation method has failed to prove the quality of Disease Management Programmes in Germany. This is why consistent further development is needed.

  13. Determination of the best appropriate management methods for the health-care wastes in Istanbul

    International Nuclear Information System (INIS)

    Alagoez, Aylin Zeren; Kocasoy, Guenay

    2008-01-01

    Health-care waste management has been a significant problem in most economically developing countries as it is in Turkey. Most of the time, the main reason for the mismanagement of these wastes is the lack of appropriate legislation and effective control; other reasons are: financial strains and a lack of awareness. Being aware of the significance of the subject, in this paper the management of the health-care wastes in Istanbul, as a Metropolitan City of Turkey, was analyzed to create an integrated health-care waste management system in the city. Within the scope of the study, the existing situation and management practices such as the amount of the health-care wastes generated, segregation procedures, collection, temporary storage and transportation of the wastes within and outside of the institution were examined. Deficiencies, inconsistencies and improper applications were revealed. The existing Turkish Medical Wastes Control Regulation and institutional structure of the health-care waste management body were reviewed. After the evaluation and comparison with the requirements of other national and international organizations, items to be changed/added in the Regulation were identified. At the end of the study, the best management methods for the Istanbul City were determined and started to be applied at the institutions. After this study, the existing Regulation has been changed. The modified Regulation was published in 2005 and implementation has started. It is expected that by the application and implementation of the research outcomes, the management of health-care wastes in Istanbul and then in all over Turkey will be improved. The results obtained can also be used in most economically developing countries where there are similar environmental problems and strict budgets

  14. Adaptive Management Methods to Protect the California Sacramento-San Joaquin Delta Water Resource

    Science.gov (United States)

    Bubenheim, David

    2016-01-01

    The California Sacramento-San Joaquin River Delta is the hub for California's water supply, conveying water from Northern to Southern California agriculture and communities while supporting important ecosystem services, agriculture, and communities in the Delta. Changes in climate, long-term drought, water quality changes, and expansion of invasive aquatic plants threatens ecosystems, impedes ecosystem restoration, and is economically, environmentally, and sociologically detrimental to the San Francisco Bay/California Delta complex. NASA Ames Research Center and the USDA-ARS partnered with the State of California and local governments to develop science-based, adaptive-management strategies for the Sacramento-San Joaquin Delta. The project combines science, operations, and economics related to integrated management scenarios for aquatic weeds to help land and waterway managers make science-informed decisions regarding management and outcomes. The team provides a comprehensive understanding of agricultural and urban land use in the Delta and the major water sheds (San Joaquin/Sacramento) supplying the Delta and interaction with drought and climate impacts on the environment, water quality, and weed growth. The team recommends conservation and modified land-use practices and aids local Delta stakeholders in developing management strategies. New remote sensing tools have been developed to enhance ability to assess conditions, inform decision support tools, and monitor management practices. Science gaps in understanding how native and invasive plants respond to altered environmental conditions are being filled and provide critical biological response parameters for Delta-SWAT simulation modeling. Operational agencies such as the California Department of Boating and Waterways provide testing and act as initial adopter of decision support tools. Methods developed by the project can become routine land and water management tools in complex river delta systems.

  15. Managerial competencies in the contex of contemporary management concepts and methods

    OpenAIRE

    Ziębicki, Bernard

    2011-01-01

    The article presents the required management competences from the perspective of contemporary management concepts. As the main concepts we have presented: knowledge management and learning organization, Total Quality Management, processes management, Kaizen and elimination of waste, virtual and network management and time based management. The most important management competences connected with above concepts are: focus on outside and effectiveness, care about efficie...

  16. Flash memory management system and method utilizing multiple block list windows

    Science.gov (United States)

    Chow, James (Inventor); Gender, Thomas K. (Inventor)

    2005-01-01

    The present invention provides a flash memory management system and method with increased performance. The flash memory management system provides the ability to efficiently manage and allocate flash memory use in a way that improves reliability and longevity, while maintaining good performance levels. The flash memory management system includes a free block mechanism, a disk maintenance mechanism, and a bad block detection mechanism. The free block mechanism provides efficient sorting of free blocks to facilitate selecting low use blocks for writing. The disk maintenance mechanism provides for the ability to efficiently clean flash memory blocks during processor idle times. The bad block detection mechanism provides the ability to better detect when a block of flash memory is likely to go bad. The flash status mechanism stores information in fast access memory that describes the content and status of the data in the flash disk. The new bank detection mechanism provides the ability to automatically detect when new banks of flash memory are added to the system. Together, these mechanisms provide a flash memory management system that can improve the operational efficiency of systems that utilize flash memory.

  17. Insomnia management in prisons in England and Wales: a mixed-methods study.

    Science.gov (United States)

    Dewa, Lindsay H; Hassan, Lamiece; Shaw, Jenny J; Senior, Jane

    2017-06-01

    Insomnia in prison is common; however, research is limited regarding the management strategies that prison establishments employ. To address this knowledge gap, we conducted a survey to identify how insomnia is detected, diagnosed and treated in adult prisons in England and Wales. Telephone interviews with a purposive sample of health-care managers were then conducted. The survey was sent to all establishments holding adult prisoners, covering screening and assessment methods to detect insomnia; treatment options, both pharmacological and non-pharmacological; the importance of insomnia as a treatable condition; and staff training available. Eighty-four (73%) prisons completed the survey. Few had a stepped approach to insomnia management, as recommended by National Institute for Health and Care Excellence (NICE) guidelines. The most common treatments available were sleep hygiene education and medication, offered by 94 and 88% of respondents, respectively. Analysis of telephone interviews revealed four main themes: insomnia as a normal occurrence in prison; the problem of medication in prison; the negative impact of the prison environment; and effective management of insomnia in prison. The current findings suggest that logistical, ethical and security barriers and a lack of staff knowledge and training impact negatively on the management of insomnia in prison. © 2017 European Sleep Research Society.

  18. MODELS AND METHODS OF SAFETY-ORIENTED PROJECT MANAGEMENT OF DEVELOPMENT OF COMPLEX SYSTEMS: METHODOLOGICAL APPROACH

    Directory of Open Access Journals (Sweden)

    Олег Богданович ЗАЧКО

    2016-03-01

    Full Text Available The methods and models of safety-oriented project management of the development of complex systems are proposed resulting from the convergence of existing approaches in project management in contrast to the mechanism of value-oriented management. A cognitive model of safety oriented project management of the development of complex systems is developed, which provides a synergistic effect that is to move the system from the original (pre condition in an optimal one from the viewpoint of life safety - post-project state. The approach of assessment the project complexity is proposed, which consists in taking into account the seasonal component of a time characteristic of life cycles of complex organizational and technical systems with occupancy. This enabled to take into account the seasonal component in simulation models of life cycle of the product operation in complex organizational and technical system, modeling the critical points of operation of systems with occupancy, which forms a new methodology for safety-oriented management of projects, programs and portfolios of projects with the formalization of the elements of complexity.

  19. Adult asthma disease management: an analysis of studies, approaches, outcomes, and methods.

    Science.gov (United States)

    Maciejewski, Matthew L; Chen, Shih-Yin; Au, David H

    2009-07-01

    Disease management has been implemented for patients with asthma in various ways. We describe the approaches to and components of adult asthma disease-management interventions, examine the outcomes evaluated, and assess the quality of published studies. We searched the MEDLINE, EMBASE, CINAHL, PsychInfo, and Cochrane databases for studies published in 1986 through 2008, on adult asthma management. With the studies that met our inclusion criteria, we examined the clinical, process, medication, economic, and patient-reported outcomes reported, and the study designs, provider collaboration during the studies, and statistical methods. Twenty-nine articles describing 27 studies satisfied our inclusion criteria. There was great variation in the content, extent of collaboration between physician and non-physician providers responsible for intervention delivery, and outcomes examined across the 27 studies. Because of limitations in the design of 22 of the 27 studies, the differences in outcomes assessed, and the lack of rigorous statistical adjustment, we could not draw definitive conclusions about the effectiveness or cost-effectiveness of the asthma disease-management programs or which approach was most effective. Few well-designed studies with rigorous evaluations have been conducted to evaluate disease-management interventions for adults with asthma. Current evidence is insufficient to recommend any particular intervention.

  20. A Small-Scale Study on Student Teachers' Perceptions of Classroom Management and Methods for Dealing with Misbehaviour

    Science.gov (United States)

    Atici, Meral

    2007-01-01

    The purpose of this study is to identify student teachers' perceptions of classroom management and methods for dealing with misbehaviour. In-depth interviews with nine student teachers at Cukurova University (CU) in Turkey have been conducted twice, prior to and at the end of their teaching practice. Instructional management, behaviour management,…

  1. Increasing students’ skills in operations management classes: Cumbuca Method as teaching-learning strategy

    Directory of Open Access Journals (Sweden)

    Jorge Muniz Junior

    2017-12-01

    Full Text Available Abstract This paper analyses the use of the Cumbuca Method as a teaching strategy to develop reading skills in engineering students. Despite their importance, reading skills are little stimulated in engineering undergraduate courses. Teamwork, communication, organization and exposure of ideas, time management are also important skills to new employees. The Cumbuca Method was created to disseminate quality concepts among company employees, by discussing text related to a given topic of interest. This analysis is based on a qualitative approach involving a sample of 200 engineering undergraduates from Operations Management discipline at a public University in the State of Sao Paulo, Brazil. The results showed that the use of this teaching strategy inducted improvements to regular reading and debate among students.

  2. Method and system for redundancy management of distributed and recoverable digital control system

    Science.gov (United States)

    Stange, Kent (Inventor); Hess, Richard (Inventor); Kelley, Gerald B (Inventor); Rogers, Randy (Inventor)

    2012-01-01

    A method and system for redundancy management is provided for a distributed and recoverable digital control system. The method uses unique redundancy management techniques to achieve recovery and restoration of redundant elements to full operation in an asynchronous environment. The system includes a first computing unit comprising a pair of redundant computational lanes for generating redundant control commands. One or more internal monitors detect data errors in the control commands, and provide a recovery trigger to the first computing unit. A second redundant computing unit provides the same features as the first computing unit. A first actuator control unit is configured to provide blending and monitoring of the control commands from the first and second computing units, and to provide a recovery trigger to each of the first and second computing units. A second actuator control unit provides the same features as the first actuator control unit.

  3. Use of quality management methods in the transition from efficacious prevention programs to effective prevention services.

    Science.gov (United States)

    Daniels, Vicki-Smith; Sandler, Irwin; Wolchik, Sharlene

    2008-06-01

    This paper applies concepts and methods developed in management to translate efficacious prevention programs into effective prevention services. The paper describes Quality Function Deployment (QFD) as a method for structured planning and development that connects the needs and wants of the consumer with the design of the product or service. The paper describes basic tools used in quality management, and discusses how they might be applied to prepare a prevention program for implementation by community agencies. Prevention programs are conceptualized as having multiple consumers (i.e., stakeholders), including the participants who receive the service, the service providers, the organizations that deliver the program, and the researchers who evaluate the programs. As an illustration of one step in the application of QFD to translate efficacious prevention programs into effective prevention services, analysis of the needs and preferences of Family Courts for the implementation of an the New Beginnings Program is presented.

  4. Severe accident management; the approach in the USA. Applications of US methods in Europe. Other approaches in Europe

    International Nuclear Information System (INIS)

    Vayssier, G.

    1999-01-01

    In this lecture severe accident management, applications of US methods in Europe are presented. Author deals with historical perspective, US industry position to core melt accidents, method of Westinghouse owners group, method of Combustion Engineering owners group, method of Babcock and Wilcox Owners group, interaction with/inspection by the USNRC and with assessment of US SAMG methods

  5. Evaluation of image guided motion management methods in lung cancer radiotherapy

    International Nuclear Information System (INIS)

    Zhuang, Ling; Yan, Di; Liang, Jian; Ionascu, Dan; Mangona, Victor; Yang, Kai; Zhou, Jun

    2014-01-01

    Purpose: To evaluate the accuracy and reliability of three target localization methods for image guided motion management in lung cancer radiotherapy. Methods: Three online image localization methods, including (1) 2D method based on 2D cone beam (CB) projection images, (2) 3D method using 3D cone beam CT (CBCT) imaging, and (3) 4D method using 4D CBCT imaging, have been evaluated using a moving phantom controlled by (a) 1D theoretical breathing motion curves and (b) 3D target motion patterns obtained from daily treatment of 3 lung cancer patients. While all methods are able to provide target mean position (MP), the 2D and 4D methods can also provide target motion standard deviation (SD) and excursion (EX). For each method, the detected MP/SD/EX values are compared to the analytically calculated actual values to calculate the errors. The MP errors are compared among three methods and the SD/EX errors are compared between the 2D and 4D methods. In the theoretical motion study (a), the dependency of MP/SD/EX error on EX is investigated with EX varying from 2.0 cm to 3.0 cm with an increment step of 0.2 cm. In the patient motion study (b), the dependency of MP error on target sizes (2.0 cm and 3.0 cm), motion patterns (four motions per patient) and EX variations is investigated using multivariant linear regression analysis. Results: In the theoretical motion study (a), the MP detection errors are −0.2 ± 0.2, −1.5 ± 1.1, and −0.2 ± 0.2 mm for 2D, 3D, and 4D methods, respectively. Both the 2D and 4D methods could accurately detect motion pattern EX (error < 1.2 mm) and SD (error < 1.0 mm). In the patient motion study (b), MP detection error vector (mm) with the 2D method (0.7 ± 0.4) is found to be significantly less than with the 3D method (1.7 ± 0.8,p < 0.001) and the 4D method (1.4 ± 1.0, p < 0.001) using paired t-test. However, no significant difference is found between the 4D method and the 3D method. Based on multivariant linear regression analysis, the

  6. Evaluation of image guided motion management methods in lung cancer radiotherapy

    Energy Technology Data Exchange (ETDEWEB)

    Zhuang, Ling [Department of Radiation Oncology, Wayne State University School of Medicine, 4100 John R, Detroit, Michigan 48201 (United States); Yan, Di; Liang, Jian; Ionascu, Dan; Mangona, Victor; Yang, Kai; Zhou, Jun, E-mail: jun.zhou@beaumont.edu [Department of Radiation Oncology, William Beaumont Hospital, 3601 West Thirteen Mile Road, Royal Oak, Michigan 48073 (United States)

    2014-03-15

    Purpose: To evaluate the accuracy and reliability of three target localization methods for image guided motion management in lung cancer radiotherapy. Methods: Three online image localization methods, including (1) 2D method based on 2D cone beam (CB) projection images, (2) 3D method using 3D cone beam CT (CBCT) imaging, and (3) 4D method using 4D CBCT imaging, have been evaluated using a moving phantom controlled by (a) 1D theoretical breathing motion curves and (b) 3D target motion patterns obtained from daily treatment of 3 lung cancer patients. While all methods are able to provide target mean position (MP), the 2D and 4D methods can also provide target motion standard deviation (SD) and excursion (EX). For each method, the detected MP/SD/EX values are compared to the analytically calculated actual values to calculate the errors. The MP errors are compared among three methods and the SD/EX errors are compared between the 2D and 4D methods. In the theoretical motion study (a), the dependency of MP/SD/EX error on EX is investigated with EX varying from 2.0 cm to 3.0 cm with an increment step of 0.2 cm. In the patient motion study (b), the dependency of MP error on target sizes (2.0 cm and 3.0 cm), motion patterns (four motions per patient) and EX variations is investigated using multivariant linear regression analysis. Results: In the theoretical motion study (a), the MP detection errors are −0.2 ± 0.2, −1.5 ± 1.1, and −0.2 ± 0.2 mm for 2D, 3D, and 4D methods, respectively. Both the 2D and 4D methods could accurately detect motion pattern EX (error < 1.2 mm) and SD (error < 1.0 mm). In the patient motion study (b), MP detection error vector (mm) with the 2D method (0.7 ± 0.4) is found to be significantly less than with the 3D method (1.7 ± 0.8,p < 0.001) and the 4D method (1.4 ± 1.0, p < 0.001) using paired t-test. However, no significant difference is found between the 4D method and the 3D method. Based on multivariant linear regression analysis, the

  7. A study on the engineering education methods with a learning management system

    OpenAIRE

    海老澤, 賢史; Ebisawa, Satoshi

    2017-01-01

    The educational methods with Learning Management System (LMS) are described, which are applied to two specialized courses for engineering education and a research guidance for graduation work at Niigata Institute of Technology.According to the analysis of LMS usage situation for graduation work, the LMS has provided an effect that learning time outside class hour is held and the convenience of students in learning is enhanced.In the specializedcourses, the rate of utilization of LMS has depen...

  8. UBICOMP-KAIZEN:The use of Japanese Quality Management methods for the Design of Smart Buildings

    OpenAIRE

    Schoch, Odilo

    2009-01-01

    This paper describes the successful development of adesign supporting method called ‘Ubicomp-Kaizen’ for the design ofcomputer-integrated ‘smart’ buildings. The tool uses known methodsof quality-management of the car-manufacturing industry andintegrates them into the architectural design process. By this, theCAAD-topics ‘design methodology’, ‘ubicomp/smart buildings’,‘interactive architecture’ and ‘Building Information Model (BIM)’ areinvolved. In result it proves the successful integration a...

  9. Cloud Service Provider Methods for Managing Insider Threats: Analysis Phase 1

    Science.gov (United States)

    2013-11-01

    of Standards and Technology (NIST) Special Publication 800-145 (NIST SP 800-145) defines three types of cloud services : Software as a Service ( SaaS ...among these three models. NIST SP 800-145 describes the three service models as follows: SaaS —The capability provided to the consumer is to use the...Cloud Service Provider Methods for Managing Insider Threats: Analysis Phase I Greg Porter November 2013 TECHNICAL NOTE CMU/SEI-2013-TN-020

  10. Risk Management method to ERP systems implementation based os critical sucess factors

    Directory of Open Access Journals (Sweden)

    Márcio Saez Caputo

    2004-10-01

    Full Text Available From the second half of years 90, the Enterprise Resource Planning (ERP systems implementation appears like one of the main investment focus related to the use of information technology in the companies, which aimed to acquire competitive advantages through cost reduction and differentiation of products with the use of these systems. ERP implementation showed to be much more than a technology project, involving structural and managing changes, becoming a complex and high risk process for the organizations. In the literature specialized on ERP, there are many examples of the difficulties of this type of project and about implementations that had not reached the expected objectives, frustrating the expectations of the contractors. The present work describes, first of all, the development of a risk management method to ERP systems implementation, based on critical success factors. Then, a case of application of the considered method is analyzed, detailing the steps and the results gotten until the moment. To the end, evidences regarding to how the method helps to improve risk management during ERP implementations are presented.

  11. Genetic methods for area-wide management of Lepidopterous pests with emphasis on F1 sterility

    International Nuclear Information System (INIS)

    Ocampo, V.R.

    1996-01-01

    Enormous losses in the production and marketing of food and fiber are caused by larvae of Lepidoptera. Currently, large quantities of insecticides are used to combat these pests. Insecticide resistance, increasing concern over pesticide pollution, and the desire to effectively manage lepidopteran pests on an area-wide basis have motivated scientists to identify and develop new pest management tactics that are compatible with current IPM. Genetic methods have emerged as a promising control strategy for lepidopteran pests. Genetic control as a practical means of pest management was first successfully implemented by Knipling and colleagues in the USA during the 1960's with the sterile insect technique (SIT) program for the screwworm fly. SIT is not a readily adapted for use against Lepidoptera as against Diptera. Radiation-induced inherited sterility (or F 1 sterility) is generally considered the most promising genetic methods for large-scale suppression of lepidopteran populations. This papers discusses four genetic control methods that have been developed and the progress that has been made in integrating sterility with other IPM tactics. (author)

  12. A two-stage inexact joint-probabilistic programming method for air quality management under uncertainty.

    Science.gov (United States)

    Lv, Y; Huang, G H; Li, Y P; Yang, Z F; Sun, W

    2011-03-01

    A two-stage inexact joint-probabilistic programming (TIJP) method is developed for planning a regional air quality management system with multiple pollutants and multiple sources. The TIJP method incorporates the techniques of two-stage stochastic programming, joint-probabilistic constraint programming and interval mathematical programming, where uncertainties expressed as probability distributions and interval values can be addressed. Moreover, it can not only examine the risk of violating joint-probability constraints, but also account for economic penalties as corrective measures against any infeasibility. The developed TIJP method is applied to a case study of a regional air pollution control problem, where the air quality index (AQI) is introduced for evaluation of the integrated air quality management system associated with multiple pollutants. The joint-probability exists in the environmental constraints for AQI, such that individual probabilistic constraints for each pollutant can be efficiently incorporated within the TIJP model. The results indicate that useful solutions for air quality management practices have been generated; they can help decision makers to identify desired pollution abatement strategies with minimized system cost and maximized environmental efficiency. Copyright © 2010 Elsevier Ltd. All rights reserved.

  13. Practical implementation of optimal management strategies in conservation programmes: a mate selection method

    Directory of Open Access Journals (Sweden)

    Fernández, J.

    2001-12-01

    Full Text Available The maintenance of genetic diversity is, from a genetic point of view, a key objective of conservation programmes. The selection of individuals contributing offspring and the decision of the mating scheme are the steps on which managers can control genetic diversity, specially on ‘ex situ’ programmes. Previous studies have shown that the optimal management strategy is to look for the parents’ contributions that yield minimum group coancestry (overall probability of identity by descent in the population and, then, to arrange mating couples following minimum pairwise coancestry. However, physiological constraints make it necessary to account for mating restrictions when deciding the contributions and, therefore, these should be implemented in a single step along with the mating plan. In the present paper, a single-step method is proposed to optimise the management of a conservation programme when restrictions on the mating scheme exist. The performance of the method is tested by computer simulation. The strategy turns out to be as efficient as the two-step method, regarding both the genetic diversity preserved and the fitness of the population.

  14. METHOD FOR SELECTION OF PROJECT MANAGEMENT APPROACH BASED ON FUZZY CONCEPTS

    Directory of Open Access Journals (Sweden)

    Igor V. KONONENKO

    2017-03-01

    Full Text Available Literature analysis of works that devoted to research of the selection a project management approach and development of effective methods for this problem solution is given. Mathematical model and method for selection of project management approach with fuzzy concepts of applicability of existing approaches are proposed. The selection is made of such approaches as the PMBOK Guide, the ISO21500 standard, the PRINCE2 methodology, the SWEBOK Guide, agile methodologies Scrum, XP, and Kanban. The number of project parameters which have a great impact on the result of the selection and measure of their impact is determined. Project parameters relate to information about the project, team, communication, critical project risks. They include the number of people involved in the project, the customer's experience with this project team, the project team's experience in this field, the project team's understanding of requirements, adapting ability, initiative, and others. The suggested method is considered on the example of its application for selection a project management approach to software development project.

  15. USE THE METHOD OF DIMENSIONING OF INFILTRATION-RETENTION BASINS FOR MANAGEMENT OF RAINWATER

    Directory of Open Access Journals (Sweden)

    Ewa Suchanek

    2015-01-01

    Full Text Available The easiest way to “use” rainwater is its detention in places where it falls, and referral to the ground. Systems of rainwater utilization system can be implemented in different variants. In the simplest configuration it is a tank, with a runoff from the roof. The principle of operation of the tank (basin is a method for rain water management. The article presents a practical application of methods of dimensioning infiltration basins by performing calculations showing how to alter the dimensions of the basin when changing the ground conditions while maintaining the same filling.

  16. Optimization of Candu fuel management with gradient methods using generalized perturbation theory

    International Nuclear Information System (INIS)

    Chambon, R.; Varin, E.; Rozon, D.

    2005-01-01

    CANDU fuel management problems are solved using time-average representation of the core. Optimization problems based on this representation have been defined in the early nineties. The mathematical programming using the generalized perturbation theory (GPT) that was developed has been implemented in the reactor code DONJON. The use of the augmented Lagrangian (AL) method is presented and evaluated in this paper. This approach is mandatory for new constraint problems. Combined with the classical Lemke method, it proves to be very efficient to reach optimal solution in a very limited number of iterations. (authors)

  17. Quantifying human and organizational factors in accident management using decision trees: the HORAAM method

    International Nuclear Information System (INIS)

    Baumont, G.; Menage, F.; Schneiter, J.R.; Spurgin, A.; Vogel, A.

    2000-01-01

    In the framework of the level 2 Probabilistic Safety Study (PSA 2) project, the Institute for Nuclear Safety and Protection (IPSN) has developed a method for taking into account Human and Organizational Reliability Aspects during accident management. Actions are taken during very degraded installation operations by teams of experts in the French framework of Crisis Organization (ONC). After describing the background of the framework of the Level 2 PSA, the French specific Crisis Organization and the characteristics of human actions in the Accident Progression Event Tree, this paper describes the method developed to introduce in PSA the Human and Organizational Reliability Analysis in Accident Management (HORAAM). This method is based on the Decision Tree method and has gone through a number of steps in its development. The first one was the observation of crisis center exercises, in order to identify the main influence factors (IFs) which affect human and organizational reliability. These IFs were used as headings in the Decision Tree method. Expert judgment was used in order to verify the IFs, to rank them, and to estimate the value of the aggregated factors to simplify the quantification of the tree. A tool based on Mathematica was developed to increase the flexibility and the efficiency of the study

  18. Human-system safety methods for development of advanced air traffic management systems

    International Nuclear Information System (INIS)

    Nelson, William R.

    1999-01-01

    The Idaho National Engineering and Environmental Laboratory (INEEL) is supporting the National Aeronautics and Space Administration in the development of advanced air traffic management (ATM) systems as part of the Advanced Air Transportation Technologies program. As part of this program INEEL conducted a survey of human-system safety methods that have been applied to complex technical systems, to identify lessons learned from these applications and provide recommendations for the development of advanced ATM systems. The domains that were surveyed included offshore oil and gas, commercial nuclear power, commercial aviation, and military. The survey showed that widely different approaches are used in these industries, and that the methods used range from very high-level, qualitative approaches to very detailed quantitative methods such as human reliability analysis (HRA) and probabilistic safety assessment (PSA). In addition, the industries varied widely in how effectively they incorporate human-system safety assessment in the design, development, and testing of complex technical systems. In spite of the lack of uniformity in the approaches and methods used, it was found that methods are available that can be combined and adapted to support the development of advanced air traffic management systems (author) (ml)

  19. Burn cycle study of tokamak power plants by the Effective Management Method

    International Nuclear Information System (INIS)

    Okano, Kunihiko; Inoue, Nobuyuki; Ogawa, Yuichi; Yoshida, Zensho

    1995-01-01

    The Effective Management Method is an action decision manner to work out the strategy of enterprises, which was developed in Japan on the base of the Kepner and Trigoe Method developed in the USA. The authors applied this method with a small modification to a burn cycle study of tokamak power plants. The numerical figure of merit for the pulsed and steady state operations are visually shown. Steady state, 1 hour pulse (with and without energy reservoir) and half-day long pulse reactor are compared. The EM method provides a common base for such comparing study. The highest score is given to an 1 hour pulsed operated reactor with an energy reservoir for the continuous electric output. However it is also pointed out that there is no 'significant' superiority in both of the steady state and pulse reactors. (author)

  20. HEALING THE ROMANIAN HEALTH CARE SYSTEM THROUGH THE TOTAL QUALITY MANAGEMENT METHOD

    Directory of Open Access Journals (Sweden)

    Cosmin Dobrin

    2015-07-01

    Nowadays, this method is used with success and covers a large area of industries, including the sanitary industry. European hospitals have used this method in order to rearrange, from the quality’s point of view, their departments and keep their customers and employees satisfied with the sanitary institution.Total Quality Management is a method that has the ability to convert the health care system, and to cover all “gaps” formed for several years. Starting with correcting as much as possible all the issues found in the health care system, will lead to the top and most important objective: focusing on patient and assuring him a significant level of satisfaction. The applicability of this method made is possible also for Romanian hospitals. Since our health care system is confronting daily with issues that affect the patients (some issues being even deadly, a change in the way the quality is perceived, is suitable for our hospitals and clinics.